WorldWideScience

Sample records for nonoranically templated mngapo

  1. Code Generation with Templates

    CERN Document Server

    Arnoldus, Jeroen; Serebrenik, A

    2012-01-01

    Templates are used to generate all kinds of text, including computer code. The last decade, the use of templates gained a lot of popularity due to the increase of dynamic web applications. Templates are a tool for programmers, and implementations of template engines are most times based on practical experience rather than based on a theoretical background. This book reveals the mathematical background of templates and shows interesting findings for improving the practical use of templates. First, a framework to determine the necessary computational power for the template metalanguage is presen

  2. Templating mesoporous zeolites

    DEFF Research Database (Denmark)

    Egeblad, Kresten; Christensen, Christina Hviid; Kustova, Marina

    2008-01-01

    The application of templating methods to produce zeolite materials with hierarchical bi- or trimodal pore size distributions is reviewed with emphasis on mesoporous materials. Hierarchical zeolite materials are categorized into three distinctly different types of materials: hierarchical zeolite...... crystals, nanosized zeolite crystals, and supported zeolite crystals. For the pure zeolite materials in the first two categories, the additional meso- or macroporosity can be classified as being either intracrystalline or intercrystalline, whereas for supported zeolite materials, the additional porosity...... originates almost exclusively from the support material. The methods for introducing mesopores into zeolite materials are discussed and categorized. In general, mesopores can be templated in zeolite materials by use of solid templating, supramolecular templating, or indirect templating...

  3. The Trouble With Templates

    CERN Document Server

    Sampson, Laura; Yunes, Nicolas

    2013-01-01

    Waveform templates are a powerful tool for extracting and characterizing gravitational wave signals, acting as highly restrictive priors on the signal morphologies that allow us to extract weak events buried deep in the instrumental noise. The templates map the waveform shapes to physical parameters, thus allowing us to produce posterior probability distributions for these parameters. However, there are attendant dangers in using highly restrictive signal priors. If strong field gravity is not accurately described by General Relativity (GR), then using GR templates may result in fundamental bias in the recovered parameters, or even worse, a complete failure to detect signals. Here we study such dangers, concentrating on three distinct possibilities. First, we show that there exist modified theories compatible with all existing tests that would fail to be detected by the LIGO/Virgo network using searches based on GR templates, but which would be detected using a one parameter post-Einsteinian extension. Second...

  4. E3 Charter Template

    Science.gov (United States)

    This is a charter template which includes decisions made during the project planning phase, as well as local project goals, a communication strategy, an outreach strategy, distribution of responsibilities and a schedule.

  5. images_template

    Data.gov (United States)

    National Aeronautics and Space Administration — Images for the website template go here. It will not change their names or locations, but will hopefully help to organize them. Oh, but for a directory structure...

  6. Joomla! 3 template essentials

    CERN Document Server

    Frankowski, Pawel

    2013-01-01

    Using this hands-on, step-by step tutorial filled with practical examples, the readers will be able to create beautiful templates and themes for your websites that will make them stand out from others.This book is written for all of you who wish to create your own unique templates for Joomla! 3.x. This book can be used by Joomla! administrators or visual designers (with no programming experience) or those of you who are used to working with common web developer tools like HTML/CSS editors for coding purposes. You would need basic knowledge of Joomla! and some knowledge of CSS and HTML.

  7. Computing layouts with deformable templates

    KAUST Repository

    Peng, Chihan

    2014-07-27

    In this paper, we tackle the problem of tiling a domain with a set of deformable templates. A valid solution to this problem completely covers the domain with templates such that the templates do not overlap. We generalize existing specialized solutions and formulate a general layout problem by modeling important constraints and admissible template deformations. Our main idea is to break the layout algorithm into two steps: a discrete step to lay out the approximate template positions and a continuous step to refine the template shapes. Our approach is suitable for a large class of applications, including floorplans, urban layouts, and arts and design. Copyright © ACM.

  8. Template Composite Dark Matter

    DEFF Research Database (Denmark)

    Drach, Vincent; Hietanen, Ari; Pica, Claudio

    2015-01-01

    We present a non perturbative study of SU(2) gauge theory with two fundamental Dirac flavours. We discuss how the model can be used as a template for composite Dark Matter (DM). We estimate one particular interaction of the DM candidate with the Standard Model : the interaction through photon...

  9. Template Composite Dark Matter

    DEFF Research Database (Denmark)

    Drach, Vincent; Hietanen, Ari; Pica, Claudio

    2015-01-01

    We present a non perturbative study of SU(2) gauge theory with two fundamental Dirac flavours. We discuss how the model can be used as a template for composite Dark Matter (DM). We estimate one particular interaction of the DM candidate with the Standard Model : the interaction through photon...

  10. Biometric template revocation

    Science.gov (United States)

    Arndt, Craig M.

    2004-08-01

    Biometric are a powerful technology for identifying humans both locally and at a distance. In order to perform identification or verification biometric systems capture an image of some biometric of a user or subject. The image is then converted mathematical to representation of the person call a template. Since we know that every human in the world is different each human will have different biometric images (different fingerprints, or faces, etc.). This is what makes biometrics useful for identification. However unlike a credit card number or a password to can be given to a person and later revoked if it is compromised and biometric is with the person for life. The problem then is to develop biometric templates witch can be easily revoked and reissued which are also unique to the user and can be easily used for identification and verification. In this paper we develop and present a method to generate a set of templates which are fully unique to the individual and also revocable. By using bases set compression algorithms in an n-dimensional orthogonal space we can represent a give biometric image in an infinite number of equally valued and unique ways. The verification and biometric matching system would be presented with a given template and revocation code. The code will then representing where in the sequence of n-dimensional vectors to start the recognition.

  11. Manufacturing ontology through templates

    Directory of Open Access Journals (Sweden)

    Diciuc Vlad

    2017-01-01

    Full Text Available The manufacturing industry contains a high volume of knowhow and of high value, much of it being held by key persons in the company. The passing of this know-how is the basis of manufacturing ontology. Among other methods like advanced filtering and algorithm based decision making, one way of handling the manufacturing ontology is via templates. The current paper tackles this approach and highlights the advantages concluding with some recommendations.

  12. The Watermark Template Attack

    OpenAIRE

    Herrigel, Alexander; Voloshynovskyy, Svyatoslav; Rytsar, Yuriy

    2001-01-01

    This paper presents a new attack, called the watermark template attach, for watermarked images. In contrast to the Stirmark benchmark, this attack does not severely reduce the quality of the image. This attack maintains, therefore, the commercial value of the watermarked image. In contrast to previous approaches, it is not the aim of the attack to change the statistics of embedded watermarks fooling the detection process but to utilize specific concepts that have been recently developed for m...

  13. The Cadastral Template Project

    DEFF Research Database (Denmark)

    Enemark, Stig; Steudler, Daniel; Williamson, Ian P.

    2004-01-01

      While many country reports have been compiled in the area of land administration over the last decade, there has not much attention been given to the basic cadastral issues. As a result, one of the objectives of Working Group 3 ?Cadastre? of the PCGIAP is the establishment of a cadastral template....... The work of the PCGIAP-Working Group 3 ?Cadastre? is being done in collaboration with Comission 7 ?Cadastre and Land Management? of the International Federation of Surveyors (FIG), which has extensive experience in comparative cadastral studies. This article describes the creation and the content...

  14. A Deformable Template Model, with Special Reference to Elliptical Templates

    DEFF Research Database (Denmark)

    Hobolth, Asger; Pedersen, Jan; Jensen, Eva Bjørn Vedel

    2002-01-01

    This paper suggests a high-level continuous image model for planar star-shaped objects. Under this model, a planar object is a stochastic deformation of a star-shaped template. The residual process, describing the difference between the radius-vector function of the template and the object...

  15. DNA-templated nanofabrication.

    Science.gov (United States)

    Becerril, Héctor A; Woolley, Adam T

    2009-02-01

    Nanofabrication, or the organizational control over matter at the nanometre scale, is an intriguing scientific challenge requiring multidisciplinary tools for its solution. DNA is a biomolecule that can be combined with other nanometre-scale entities through chemical self-assembly to form a broad variety of nanomaterials. In this tutorial review we present the principles that allow DNA to interact with other chemical species, and describe the challenges and potential applications of DNA as a template for making both biological and inorganic features with nanometre resolution. As such, this report should be of interest to chemists, surface and materials scientists, biologists, and nanotechnologists, as well as others who seek to use DNA in nanofabrication.

  16. Templated quasicrystalline molecular layers

    Science.gov (United States)

    Smerdon, Joe; Young, Kirsty; Lowe, Michael; Hars, Sanger; Yadav, Thakur; Hesp, David; Dhanak, Vinod; Tsai, An-Pang; Sharma, Hem Raj; McGrath, Ronan

    2014-03-01

    Quasicrystals are materials with long range ordering but no periodicity. We report scanning tunneling microscopy (STM) observations of quasicrystalline molecular layers on five-fold quasicrystal surfaces. The molecules adopt positions and orientations on the surface consistent with the quasicrystalline ordering of the substrate. Carbon-60 adsorbs atop sufficiently-separated Fe atoms on icosahedral Al-Cu-Fe to form a unique quasicrystalline lattice whereas further C60 molecules decorate remaining surface Fe atoms in a quasi-degenerate fashion. Pentacene (Pn) adsorbs at tenfold-symmetric points around surface-bisected rhombic triacontahedral clusters in icosahedral Ag-In-Yb. These systems constitute the first demonstrations of quasicrystalline molecular ordering on a template. EPSRC EP/D05253X/1, EP/D071828/1, UK BIS.

  17. Template-synthesized opal hydrogels

    Institute of Scientific and Technical Information of China (English)

    LI Jun; JI Lijun; RONG Jianhua; YANG Zhenzhong

    2003-01-01

    Opal hydrogels could be synthesized with polymer inverse opal template. A pH responsive opal N-iso- propylacrylamide/acrylic acid copolymerized hydrogel was prepared as an example. The ordered structure and response to pH were investigated. Through the sol-gel process of tetrabutyl titanate, opal titania was obtained with the opal hydrogel template.

  18. Making Deformable Template Models Operational

    DEFF Research Database (Denmark)

    Fisker, Rune

    2000-01-01

    Deformable template models are a very popular and powerful tool within the field of image processing and computer vision. This thesis treats this type of models extensively with special focus on handling their common difficulties, i.e. model parameter selection, initialization and optimization...... published during the Ph.D. project. To put these articles into the general context of deformable template models and to pass on an overview of the deformable template model literature, the thesis starts with a compact survey of the deformable template model literature with special focus on representation....... A proper handling of the common difficulties is essential for making the models operational by a non-expert user, which is a requirement for intensifying and commercializing the use of deformable template models. The thesis is organized as a collection of the most important articles, which has been...

  19. Cloning nanocrystal morphology with soft templates

    Science.gov (United States)

    Thapa, Dev Kumar; Pandey, Anshu

    2016-08-01

    In most template directed preparative methods, while the template decides the nanostructure morphology, the structure of the template itself is a non-general outcome of its peculiar chemistry. Here we demonstrate a template mediated synthesis that overcomes this deficiency. This synthesis involves overgrowth of silica template onto a sacrificial nanocrystal. Such templates are used to copy the morphologies of gold nanorods. After template overgrowth, gold is removed and silver is regrown in the template cavity to produce a single crystal silver nanorod. This technique allows for duplicating existing nanocrystals, while also providing a quantifiable breakdown of the structure - shape interdependence.

  20. Templated Growth of Carbon Nanotubes

    Science.gov (United States)

    Siochik Emilie J. (Inventor)

    2007-01-01

    A method of growing carbon nanotubes uses a synthesized mesoporous si lica template with approximately cylindrical pores being formed there in. The surfaces of the pores are coated with a carbon nanotube precu rsor, and the template with the surfaces of the pores so-coated is th en heated until the carbon nanotube precursor in each pore is convert ed to a carbon nanotube.

  1. The LOLITA User-Definable Template Interface

    OpenAIRE

    Košmelj, Katarina

    2001-01-01

    The development of user-definable templates interfaces which allow the user to design new templates definitions in a user-friendly way is a new issue in the field of information extraction. The LOLITA user-definable templates interface allows the user to define new templates using sentences in natural language text with a few restrictions and formal elements. This approach is rather different from previous approaches to information extraction which require developers to code the template defi...

  2. Biometric template transformation: a security analysis

    Science.gov (United States)

    Nagar, Abhishek; Nandakumar, Karthik; Jain, Anil K.

    2010-01-01

    One of the critical steps in designing a secure biometric system is protecting the templates of the users that are stored either in a central database or on smart cards. If a biometric template is compromised, it leads to serious security and privacy threats because unlike passwords, it is not possible for a legitimate user to revoke his biometric identifiers and switch to another set of uncompromised identifiers. One methodology for biometric template protection is the template transformation approach, where the template, consisting of the features extracted from the biometric trait, is transformed using parameters derived from a user specific password or key. Only the transformed template is stored and matching is performed directly in the transformed domain. In this paper, we formally investigate the security strength of template transformation techniques and define six metrics that facilitate a holistic security evaluation. Furthermore, we analyze the security of two wellknown template transformation techniques, namely, Biohashing and cancelable fingerprint templates based on the proposed metrics. Our analysis indicates that both these schemes are vulnerable to intrusion and linkage attacks because it is relatively easy to obtain either a close approximation of the original template (Biohashing) or a pre-image of the transformed template (cancelable fingerprints). We argue that the security strength of template transformation techniques must consider also consider the computational complexity of obtaining a complete pre-image of the transformed template in addition to the complexity of recovering the original biometric template.

  3. Quantificational Etching of AAO Template

    Institute of Scientific and Technical Information of China (English)

    Guojun SONG; Dong CHEN; Zhi PENG; Xilin SHE; Jianjiang LI; Ping HAN

    2007-01-01

    Ni nanowires were prepared by electrodeposition in porous anodized aluminum oxide (AAO) template from a composite electrolyte solution. Well-ordered Ni nanowire arrays with controllable length were then made by the partial removal of AAO using a mixture of phosphoric acid and chromic acid (6 wt pct H3PO4:1.8 wt pct H3CrO4). The images of Ni nanowire arrays were studied by scanning electron microscopy (SEM) to determine the relationship between etching time and the length of Ni nanowire arrays. The results indicate that the length of nanowires exposed from the template can be accurately controlled by controlling etching time.

  4. Progress of NIL template making

    Science.gov (United States)

    Yusa, Satoshi; Hiraka, Takaaki; Kobiki, Ayumi; Sasaki, Shiho; Itoh, Kimio; Toyama, Nobuhito; Kurihara, Masaaki; Mohri, Hiroshi; Hayashi, Naoya

    2007-05-01

    Nano-imprint lithography (NIL) has been counted as one of the lithography solutions for hp32nm node and beyond. Recently, the small line edge roughness (LER) as well as the potentially high resolution that will ensure no-OPC mask feature is attracting many researchers. The template making is one of the most critical issues for the realization of NIL. Especially when we think of a practical template fabrication process on a 65mm square format that is going to be the industry standard, the resolution of the template making process showed a limitation. We have achieved for the first time an hp22nm resolution on the 65nm template format. Both line and space patterns and hole patterns were well resolved. Regarding dot patterns, we still need improvement, but we have achieved resolution down to hp28nm. Although so far we cannot achieve these resolution limits of various pattern category at the same time on one substrate, an intermediate process condition showed sufficient uniformity both in lateral CD and in vertical depth. Global pattern image placement also showed sufficient numbers at this stage of lithography development. A 20nm feature (with a pitch of 80nm) showed sufficient imprint result.

  5. Supply-Chain Optimization Template

    Science.gov (United States)

    Quiett, William F.; Sealing, Scott L.

    2009-01-01

    The Supply-Chain Optimization Template (SCOT) is an instructional guide for identifying, evaluating, and optimizing (including re-engineering) aerospace- oriented supply chains. The SCOT was derived from the Supply Chain Council s Supply-Chain Operations Reference (SCC SCOR) Model, which is more generic and more oriented toward achieving a competitive advantage in business.

  6. Viral-templated Palladium Nanocatalysts

    Science.gov (United States)

    Yang, Cuixian

    Despite recent progress on nanocatalysis, there exist several critical challenges in simple and readily controllable nanocatalyst synthesis including the unpredictable particle growth, deactivation of catalytic activity, cumbersome catalyst recovery and lack of in-situ reaction monitoring. In this dissertation, two novel approaches are presented for the fabrication of viral-templated palladium (Pd) nanocatalysts, and their catalytic activities for dichromate reduction reaction and Suzuki Coupling reaction were thoroughly studied. In the first approach, viral template based bottom-up assembly is employed for the Pd nanocatalyst synthesis in a chip-based format. Specifically, genetically displayed cysteine residues on each coat protein of Tobacco Mosaic Virus (TMV) templates provide precisely spaced thiol functionalities for readily controllable surface assembly and enhanced formation of catalytically active Pd nanoparticles. Catalysts with the chip-based format allow for simple separation and in-situ monitoring of the reaction extent. Thorough examination of synthesis-structure-activity relationship of Pd nanoparticles formed on surface-assembled viral templates shows that Pd nanoparticle size, catalyst loading density and catalytic activity of viral-templated Pd nanocatalysts can be readily controlled simply by tuning the synthesis conditions. The viral-templated Pd nanocatalysts with optimized synthesis conditions are shown to have higher catalytic activity per unit Pd mass than the commercial Pd/C catalysts. Furthermore, tunable and selective surface assembly of TMV biotemplates is exploited to control the loading density and location of Pd nanocatalysts on solid substrates via preferential electroless deposition. In addition, the catalytic activities of surface-assembled TMV-templated Pd nanocatalysts were also investigated for the ligand-free Suzuki Coupling reaction under mild reaction conditions. The chip-based format enables simple catalyst separation and

  7. National Wildlife Refuge System Survey Protocol Template

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This template was developed for drafting National Wildlife Refuge System (NWRS) Survey Protocols. The template is arranged in the same order as the eight basic...

  8. Web Template Extraction Based on Hyperlink Analysis

    Directory of Open Access Journals (Sweden)

    Julián Alarte

    2015-01-01

    Full Text Available Web templates are one of the main development resources for website engineers. Templates allow them to increase productivity by plugin content into already formatted and prepared pagelets. For the final user templates are also useful, because they provide uniformity and a common look and feel for all webpages. However, from the point of view of crawlers and indexers, templates are an important problem, because templates usually contain irrelevant information such as advertisements, menus, and banners. Processing and storing this information is likely to lead to a waste of resources (storage space, bandwidth, etc.. It has been measured that templates represent between 40% and 50% of data on the Web. Therefore, identifying templates is essential for indexing tasks. In this work we propose a novel method for automatic template extraction that is based on similarity analysis between the DOM trees of a collection of webpages that are detected using menus information. Our implementation and experiments demonstrate the usefulness of the technique.

  9. Template electrodeposition of catalytic nanomotors.

    Science.gov (United States)

    Wang, Joseph

    2013-01-01

    The combination of nanomaterials with electrode materials has opened new horizons in electroanalytical chemistry, and in electrochemistry in general. Over the past two decades we have witnessed an enormous activity aimed at designing new electrochemical devices based on nanoparticles, nanotubes or nanowires, and towards the use of electrochemical routes--particularly template-assisted electrodeposition--for preparing nanostructured materials. The power of template-assisted electrochemical synthesis is demonstrated in this article towards the preparation and the realization of self-propelled catalytic nanomotors, ranging from Pt-Au nanowire motors to polymer/Pt microtube engines. Design considerations affecting the propulsion behavior of such catalytic nanomotors are discussed along with recent bioanalytical and environmental applications. Despite recent major advances, artificial nanomotors have a low efficiency compared to their natural counterparts. Hopefully, the present Faraday Discussion will stimulate other electrochemistry teams to contribute to the fascinating area of artificial nanomachines.

  10. LTL - The Little Template Library

    Science.gov (United States)

    Gössl, C. A.; Drory, N.; Snigula, J.

    2004-07-01

    The Little Template Library is an expression templates based C++ library for array processing, image processing, FITS and ASCII I/O, and linear algebra. It is released under the GNU Public License (GPL). Although the library is developed with application to astronomical image and data processing in mind, it is by no means restricted to these fields of application. In fact, it qualifies as a fully general array processing package. Focus is laid on a high abstraction level regarding the handling of expressions involving arrays or parts thereof and linear algebra related operations without the usually involved negative impact on performance. The price to pay is dependence on a compiler implementing enough of the current ANSI C++ specification, as well as significantly higher demand on resources at compile time. The LTL provides dynamic arrays of up to 5 dimensions, sub-arrays and slicing, support for fixed size vectors and matrices including basic linear algebra operations, expression templates based evaluation, and I/O facilities for columnar ASCII and FITS format files. In addition it supplies utility classes for statistics, linear and non-linear least squares fitting, and command line and configuration file parsing. YODA (Drory 2002) and all elements of the WeCAPP reduction pipeline (Riffeser et al. 2001, Gössl & Riffeser 2002, 2003) were implemented using the LTL.

  11. Testing sensory evidence against mnemonic templates.

    Science.gov (United States)

    Myers, Nicholas E; Rohenkohl, Gustavo; Wyart, Valentin; Woolrich, Mark W; Nobre, Anna C; Stokes, Mark G

    2015-01-01

    Most perceptual decisions require comparisons between current input and an internal template. Classic studies propose that templates are encoded in sustained activity of sensory neurons. However, stimulus encoding is itself dynamic, tracing a complex trajectory through activity space. Which part of this trajectory is pre-activated to reflect the template? Here we recorded magneto- and electroencephalography during a visual target-detection task, and used pattern analyses to decode template, stimulus, and decision-variable representation. Our findings ran counter to the dominant model of sustained pre-activation. Instead, template information emerged transiently around stimulus onset and quickly subsided. Cross-generalization between stimulus and template coding, indicating a shared neural representation, occurred only briefly. Our results are compatible with the proposal that template representation relies on a matched filter, transforming input into task-appropriate output. This proposal was consistent with a signed difference response at the perceptual decision stage, which can be explained by a simple neural model.

  12. I - Template Metaprogramming for Massively Parallel Scientific Computing - Expression Templates

    CERN Document Server

    CERN. Geneva

    2016-01-01

    Large scale scientific computing raises questions on different levels ranging from the fomulation of the problems to the choice of the best algorithms and their implementation for a specific platform. There are similarities in these different topics that can be exploited by modern-style C++ template metaprogramming techniques to produce readable, maintainable and generic code. Traditional low-level code tend to be fast but platform-dependent, and it obfuscates the meaning of the algorithm. On the other hand, object-oriented approach is nice to read, but may come with an inherent performance penalty. These lectures aim to present he basics of the Expression Template (ET) idiom which allows us to keep the object-oriented approach without sacrificing performance. We will in particular show to to enhance ET to include SIMD vectorization. We will then introduce techniques for abstracting iteration, and introduce thread-level parallelism for use in heavy data-centric loads. We will show to to apply these methods i...

  13. A template for design personas

    DEFF Research Database (Denmark)

    Nielsen, Lene; Storgaard Nielsen, Kira; Stage, Jan

    2015-01-01

    The persona method is gaining widespread use and support. Many researchers have reported from single cases and from novel domains on how they have used the method. However, the way companies and design groups describe personas has not been the focus of attention. This paper analyses 47 descriptions...... from 13 companies and compares these to an analysis of recommendations from 11 templates from literature. Furthermore, 28 interviews with Danish practitioners with experience in using personas are analyzed for content on persona descriptions. The study finds that a Danish persona style has developed...

  14. Templated growth of graphenic materials

    Energy Technology Data Exchange (ETDEWEB)

    Nicholas, Nolan W; Connors, L Matthew [Department of Physics, Rice University, 6100 Main, Houston, TX (United States); Ding, Feng [Institute of Textile and Clothing, Hong Kong Polytechnic University, Kowloon (Hong Kong); Yakobson, Boris I [Department of Mechanical Engineering and Materials Science, Rice University, 6100 Main, Houston, TX (United States); Schmidt, Howard K; Hauge, Robert H [Richard E Smalley Institute for Nanoscale Science and Technology, Rice University, 6100 Main, Houston, TX (United States)], E-mail: nolan.nicholas@matricresearch.com

    2009-06-17

    A novel strategy is proposed for the topologically controlled synthesis of extended graphenic sheets by additively reacting carbon into a pre-existing graphene sheet which is on top of a templating substrate. This concept is implemented and demonstrated using chemical vapor deposition (CVD). Novel morphological features observed in this study suggest unusual aspects of the CVD growth process. CVD results demonstrate the basic soundness of the synthesis strategy but highlight the sensitivity of the process to certain types of disruption and the need for alternative forms of embodiment.

  15. Hard template synthesis of metal nanowires

    Directory of Open Access Journals (Sweden)

    Go eKawamura

    2014-11-01

    Full Text Available Metal nanowires (NWs have attracted much attention because of their high electron conductivity, optical transmittance and tunable magnetic properties. Metal NWs have been synthesized using soft templates such as surface stabilizing molecules and polymers, and hard templates such as anodic aluminum oxide, mesoporous oxide, carbon nanotubes. NWs prepared from hard templates are composites of metals and the oxide/carbon matrix. Thus, selecting appropriate elements can simplify the production of composite devices. The resulting NWs are immobilized and spatially arranged, as dictated by the ordered porous structure of the template. This avoids the NWs from aggregating, which is common for NWs prepared with soft templates in solution. Herein, the hard template synthesis of metal NWs is reviewed, and the resulting structures, properties and potential applications are discussed.

  16. Vertical Carbon Nanotube Device in Nanoporous Templates

    Science.gov (United States)

    Maschmann, Matthew Ralph (Inventor); Fisher, Timothy Scott (Inventor); Sands, Timothy (Inventor); Bashir, Rashid (Inventor)

    2014-01-01

    A modified porous anodic alumina template (PAA) containing a thin CNT catalyst layer directly embedded into the pore walls. CNT synthesis using the template selectively catalyzes SWNTs and DWNTs from the embedded catalyst layer to the top PAA surface, creating a vertical CNT channel within the pores. Subsequent processing allows for easy contact metallization and adaptable functionalization of the CNTs and template for a myriad of applications.

  17. Influence of template fill in graphoepitaxy DSA

    Science.gov (United States)

    Doise, Jan; Bekaert, Joost; Chan, Boon Teik; Hong, SungEun; Lin, Guanyang; Gronheid, Roel

    2016-03-01

    Directed self-assembly (DSA) of block copolymers (BCP) is considered a promising patterning approach for the 7 nm node and beyond. Specifically, a grapho-epitaxy process using a cylindrical phase BCP may offer an efficient solution for patterning randomly distributed contact holes with sub-resolution pitches, such as found in via and cut mask levels. In any grapho-epitaxy process, the pattern density impacts the template fill (local BCP thickness inside the template) and may cause defects due to respectively over- or underfilling of the template. In order to tackle this issue thoroughly, the parameters that determine template fill and the influence of template fill on the resulting pattern should be investigated. In this work, using three process flow variations (with different template surface energy), template fill is experimentally characterized as a function of pattern density and film thickness. The impact of these parameters on template fill is highly dependent on the process flow, and thus pre-pattern surface energy. Template fill has a considerable effect on the pattern transfer of the DSA contact holes into the underlying layer. Higher fill levels give rise to smaller contact holes and worse critical dimension uniformity. These results are important towards DSA-aware design and show that fill is a crucial parameter in grapho-epitaxy DSA.

  18. Comparison between the standard SPM2 template and Korean-standard template in FDG-PET

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jung Hee; Lee, Byeong Il; Song, Ho Chun; Min, Jung Joon; Bom, Hee Seung [Chonnam National University Hospital, Gwangju (Korea, Republic of); Lee, Jae Sung [Seoul National University Hospital, Seoul (Korea, Republic of)

    2005-07-01

    The preprocessing step of statistical parametric mapping (SPM) requires the procedure of spatial normalization that consists of applying the nonlinear deformations needed to force every particular PET scan to match a reference template. The purpose of this study is to asses the statistic influence of using 2 different templates (the standard SPM2-PET template and Korean-standard PET template) in the normalization. We compared the regional metabolic patterns on 18F-FDG (fluorodeoxyglucose) images obtained from 4 patients with Alzheimers disease (AD) and 16 normal subjects. The statistical outcome of between- group comparison was analyzed with SPM2 and was applied into two levels of thresholds (an uncorrected P value of P <0.001, a corrected P value of P < 0.05). As a result, the most significant hypometabolic region was commonly found in the left temporal gyrus regardless of template type or thresholds. However, inconsistent results including different extent and the t-score statistics representing metabolic changes could be also observed between two templates. While the standard SPM2 template showed hypometabolic regions corresponding to Brodman area (BA) 7 and 9, Korean-standard template was not observed these regions. In addition, hypometabolic regions corresponding to BA 38 and 46 indicated not the standard SPM2 template but Korean-standard template. Statistic result showed that the standard SPM2 template effectively reflects the dorsal region of the brain while Korean-standard template is more sensitive to the medial region of the brain.

  19. Templates for integrated nanofiber growth

    DEFF Research Database (Denmark)

    Oliveira Hansen, Roana Melina de

    Para-hexaphenylene (p6P) molecules have the ability to self-assemble into organic nanofibers. These nanofibers hold unique optoelectronic properties, which make them interesting candidates as elements in electronic and optoelectronic devices. Typically these nanofibers are grown on specific single......, high-volume integration. Besides such single-crystalline templates, the nanofibers can also be grown on non-crystalline gold surfaces, on which the orientation of the nanofibers can be manipulated by structuring the gold surface prior to p6P deposition. In this work, a novel method for in-situ growth...... of p6P nanofibers on nano-structured gold surfaces is presented. The substrates are prepared by conventional nanofabrication techniques such as e-beam lithography and metal deposition, which increase their potential as device platforms. Some of the results presented here demonstrate, that both...

  20. Testing by C++ template metaprograms

    CERN Document Server

    Pataki, Norbert

    2010-01-01

    Testing is one of the most indispensable tasks in software engineering. The role of testing in software development has grown significantly because testing is able to reveal defects in the code in an early stage of development. Many unit test frameworks compatible with C/C++ code exist, but a standard one is missing. Unfortunately, many unsolved problems can be mentioned with the existing methods, for example usually external tools are necessary for testing C++ programs. In this paper we present a new approach for testing C++ programs. Our solution is based on C++ template metaprogramming facilities, so it can work with the standard-compliant compilers. The metaprogramming approach ensures that the overhead of testing is minimal at runtime. This approach also supports that the specification language can be customized among other advantages. Nevertheless, the only necessary tool is the compiler itself.

  1. A Template for Design Personas:

    DEFF Research Database (Denmark)

    Nielsen, Lene; Hansen, Kira Storgaard; Stage, Jan;

    2015-01-01

    The persona method is gaining widespread use and support. Many researchers have reported from single cases and from novel domains on how they have used the method. However, the way companies and design groups describe personas has not been the focus of attention. This paper analyses 47 descriptions...... from 13 companies and compares these to an analysis of recommendations from 11 templates from literature. Furthermore, 28 interviews with Danish practitioners with experience in using personas are analyzed for content on persona descriptions. The study finds that a Danish persona style has developed...... that is different from the recommendations in the lack of marketing and business related information and the absence of goals as differentiator for personas. Furthermore, the inspiration and knowledge on personas originates from co-workers and seminars and not much from literature. This indicates that the community...

  2. Template synthesis of ordered macroporous hydroxyapatite bioceramics.

    Science.gov (United States)

    Ji, Lijun; Jell, Gavin; Dong, Yixiang; Jones, Julian R; Stevens, Molly M

    2011-08-28

    Hydroxyapatite has found wide application in bone tissue engineering. Here we use a macroporous carbon template to generate highly ordered macroporous hydroxyapatite bioceramics composed of close-packed hollow spherical pores with interconnected channels. The template has advantages for the preparation of ordered materials.

  3. Screening for templates that promote crystallization

    NARCIS (Netherlands)

    Urbanus, J.; Roelands, C.P.M.; Horst, J.H. ter; Verdoes, D.; Jansens, P.J.

    2008-01-01

    In Situ Product Recovery (ISPR) applied in fermentation processes leads to improved yield and productivity of these processes. In principle, ISPR can be achieved using Template Induced Crystallization (TIC), which is one possible ISPR technique. With TIC, templates are added to the solution as a spe

  4. Indexing Images: Testing an Image Description Template.

    Science.gov (United States)

    Jorgensen, Corinne

    1996-01-01

    A template for pictorial image description to be used by novice image searchers in recording their descriptions of images was tested; image attribute classes derived in previous research were used to model the template. Results indicated that users may need training and/or more guidance to correctly assign descriptors to higher-level classes.…

  5. Template Assembly for Detailed Urban Reconstruction

    KAUST Repository

    Nan, Liangliang

    2015-05-04

    We propose a new framework to reconstruct building details by automatically assembling 3D templates on coarse textured building models. In a preprocessing step, we generate an initial coarse model to approximate a point cloud computed using Structure from Motion and Multi View Stereo, and we model a set of 3D templates of facade details. Next, we optimize the initial coarse model to enforce consistency between geometry and appearance (texture images). Then, building details are reconstructed by assembling templates on the textured faces of the coarse model. The 3D templates are automatically chosen and located by our optimization-based template assembly algorithm that balances image matching and structural regularity. In the results, we demonstrate how our framework can enrich the details of coarse models using various data sets.

  6. Solvable model for template coexistence in protocells

    CERN Document Server

    Fontanari, J F

    2012-01-01

    Compartmentalization of self-replicating molecules (templates) in protocells is a necessary step towards the evolution of modern cells. However, coexistence between distinct template types inside a protocell can be achieved only if there is a selective pressure favoring protocells with a mixed template composition. Here we study analytically a group selection model for the coexistence between two template types using the diffusion approximation of population genetics. The model combines competition at the template and protocell levels as well as genetic drift inside protocells. At the steady state, we find a continuous phase transition separating the coexistence and segregation regimes, with the order parameter vanishing linearly with the distance to the critical point. In addition, we derive explicit analytical expressions for the critical steady-state probability density of protocell compositions.

  7. Solvable model for template coexistence in protocells

    Science.gov (United States)

    Fontanari, J. F.; Serva, M.

    2013-02-01

    Compartmentalization of self-replicating molecules (templates) in protocells is a necessary step towards the evolution of modern cells. However, coexistence between distinct template types inside a protocell can be achieved only if there is a selective pressure favoring protocells with a mixed template composition. Here we study analytically a group selection model for the coexistence between two template types using the diffusion approximation of population genetics. The model combines competition at the template and protocell levels as well as genetic drift inside protocells. At the steady state, we find a continuous phase transition separating the coexistence and segregation regimes, with the order parameter vanishing linearly with the distance to the critical point. In addition, we derive explicit analytical expressions for the critical steady-state probability density of protocell compositions.

  8. A Bayesian method for pulsar template generation

    CERN Document Server

    Imgrund, M; Kramer, M; Lesch, H

    2015-01-01

    Extracting Times of Arrival from pulsar radio signals depends on the knowledge of the pulsars pulse profile and how this template is generated. We examine pulsar template generation with Bayesian methods. We will contrast the classical generation mechanism of averaging intensity profiles with a new approach based on Bayesian inference. We introduce the Bayesian measurement model imposed and derive the algorithm to reconstruct a "statistical template" out of noisy data. The properties of these "statistical templates" are analysed with simulated and real measurement data from PSR B1133+16. We explain how to put this new form of template to use in analysing secondary parameters of interest and give various examples: We implement a nonlinear filter for determining ToAs of pulsars. Applying this method to data from PSR J1713+0747 we derive ToAs self consistently, meaning all epochs were timed and we used the same epochs for template generation. While the average template contains fluctuations and noise as unavoida...

  9. Templated Growth of Magnetic Recording Media

    Science.gov (United States)

    Sundar, Vignesh

    Current and potential next-generation magnetic recording technologies are based on the writing and reading of bits on a magnetic thin film with a granular microstructure, with grains of the magnetic material surrounded by an amorphous segregant. In order to realize the highest achievable data storage capabilities, there is a need for better control of the magnetic media microstructure, particularly in terms of minimizing grain size and grain boundary thickness distributions. In this work, a guided magnetic media growth is attempted by creating a pre-fabricated template with a specific material and morphology. The template is designed in such a way that, when magnetic media consisting of the magnetic alloy and segregant are sputtered, the sites on the template result in a controlled two-phase growth of magnetic media. The template is fabricated using self-assembling block copolymers, which can be used to fabricate nanostructures with a regular hexagonal lattice of spheres of one block in the other's matrix. These are then used as etch-masks to fabricate the template. In this thesis, we describe the approach used to fabricate these templates and demonstrate the two-phase growth of magnetic recording media. In such an approach, the magnetic grain size is defined by the uniform pitch of the block copolymer pattern, resulting in a uniform microstructure with much better grain size distribution than can be obtained with conventional un-templated media growth. The templated growth technique is also a suitable additive technique for the fabrication of Bit Patterned Media, another potential next-generation technology wherein the magnetic bits are isolated patterned islands. Combining nanoimprint lithography with templated growth, we can generate a long range spatially ordered array of magnetic islands with no etching of the magnetic material.

  10. Templating irreversible covalent macrocyclization by using anions.

    Science.gov (United States)

    Kataev, Evgeny A; Kolesnikov, Grigory V; Arnold, Rene; Lavrov, Herman V; Khrustalev, Victor N

    2013-03-11

    Inorganic anions were used as templates in the reaction between a diamine and an activated diacid to form macrocyclic amides. The reaction conditions were found to perform the macrocyclization sufficiently slow to observe a template effect. A number of analytical methods were used to clarify the reaction mechanisms and to show that the structure of the intermediate plays a decisive role in determining the product distribution. For the macrocyclization under kinetic control, it was shown that the amount of a template, the conformational rigidity of building blocks, and the anion affinities of reaction components and intermediates are important parameters that one should take into consideration to achieve high yields.

  11. Templated and template-free fabrication strategies for zero-dimensional hollow MOF superstructures.

    Science.gov (United States)

    Kim, Hyehyun; Lah, Myoung Soo

    2017-03-23

    Various fabrication strategies for hollow metal-organic framework (MOF) superstructures are reviewed and classified using various types of external templates and their properties. Hollow MOF superstructures have also been prepared without external templates, wherein unstable intermediates obtained during reactions convert to the final hollow MOF superstructures. Many hollow MOF superstructures have been fabricated using hard templates. After the core-shell core@MOF structure was prepared using a hard template, the core was selectively etched to generate a hollow MOF superstructure. Another approach for generating hollow superstructures is to use a solid reactant as a sacrificial template; this method requires no additional etching process. Soft templates such as discontinuous liquid/emulsion droplets and gas bubbles in a continuous soft phase have also been employed to prepare hollow MOF superstructures.

  12. Template for safety reports with descriptive example

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    This report provides a template for future safety reports on long-term safety in support of important decisions and permit applications in connection with the construction of a deep repository system. The template aims at providing a uniform structure for describing long-term safety, after the repository has been closed and sealed. The availability of such a structure will simplify both preparation and review of the safety reports, and make it possible to follow how safety assessments are influenced by the progressively more detailed body of data that emerges. A separate section containing `descriptive examples` has been appended to the template. This section illustrates what the different chapters of the template should contain. 279 refs.

  13. Surgical Templates for Dental Implant Positioning; Current ...

    African Journals Online (AJOL)

    applied scientifically based research techniques to develop an endosseous implant that forms ... KEYWORDS: Dental implants, surgical templates, surgical procedure, stent .... during the surgical stage for single implant therapy.[24] Afterward,.

  14. Nanowires and nanostructures fabrication using template methods

    DEFF Research Database (Denmark)

    Mátéfi-Tempfli, Stefan; Mátéfi-Tempfli, M.; Vlad, A.;

    2009-01-01

    One of the great challenges of today is to find reliable techniques for the fabrication of nanomaterials and nanostructures. Methods based on template synthesis and on self organization are the most promising due to their easiness and low cost. This paper focuses on the electrochemical synthesis ...... of nanowires and nanostructures using nanoporous host materials such as supported anodic aluminum considering it as a key template for nanowires based devices. New ways are opened for applications by combining such template synthesis methods with nanolithographic techniques.......One of the great challenges of today is to find reliable techniques for the fabrication of nanomaterials and nanostructures. Methods based on template synthesis and on self organization are the most promising due to their easiness and low cost. This paper focuses on the electrochemical synthesis...

  15. Template Approach for Adaptive Learning Strategies

    NARCIS (Netherlands)

    Abbing, Jana; Koidl, Kevin

    2006-01-01

    Please, cite this publication as: Abbing, J. & Koidl, K. (2006). Template Approach for Adaptive Learning Strategies. Proceedings of Adaptive Hypermedia. June, Dublin, Ireland. Retrieved June 30th, 2006, from http://dspace.learningnetworks.org

  16. Performance Evaluation of Biometric Template Update

    CERN Document Server

    Giot, Romain; Dorizzi, Bernadette

    2012-01-01

    Template update allows to modify the biometric reference of a user while he uses the biometric system. With such kind of mechanism we expect the biometric system uses always an up to date representation of the user, by capturing his intra-class (temporary or permanent) variability. Although several studies exist in the literature, there is no commonly adopted evaluation scheme. This does not ease the comparison of the different systems of the literature. In this paper, we show that using different evaluation procedures can lead in different, and contradictory, interpretations of the results. We use a keystroke dynamics (which is a modality suffering of template ageing quickly) template update system on a dataset consisting of height different sessions to illustrate this point. Even if we do not answer to this problematic, it shows that it is necessary to normalize the template update evaluation procedures.

  17. Fast Legendre moment computation for template matching

    Science.gov (United States)

    Li, Bing C.

    2017-05-01

    Normalized cross correlation (NCC) based template matching is insensitive to intensity changes and it has many applications in image processing, object detection, video tracking and pattern recognition. However, normalized cross correlation implementation is computationally expensive since it involves both correlation computation and normalization implementation. In this paper, we propose Legendre moment approach for fast normalized cross correlation implementation and show that the computational cost of this proposed approach is independent of template mask sizes which is significantly faster than traditional mask size dependent approaches, especially for large mask templates. Legendre polynomials have been widely used in solving Laplace equation in electrodynamics in spherical coordinate systems, and solving Schrodinger equation in quantum mechanics. In this paper, we extend Legendre polynomials from physics to computer vision and pattern recognition fields, and demonstrate that Legendre polynomials can help to reduce the computational cost of NCC based template matching significantly.

  18. Macroporous polymer foams by hydrocarbon templating

    OpenAIRE

    Shastri, Venkatram Prasad; Martin, Ivan; Langer, Robert

    2000-01-01

    Porous polymeric media (polymer foams) are utilized in a wide range of applications, such as thermal and mechanical insulators, solid supports for catalysis, and medical devices. A process for the production of polymer foams has been developed. This process, which is applicable to a wide range of polymers, uses a hydrocarbon particulate phase as a template for the precipitation of the polymer phase and subsequent pore formation. The use of a hydrocarbon template allows for enhanced control ov...

  19. Scalable, Fast Cloud Computing with Execution Templates

    OpenAIRE

    Mashayekhi, Omid; Qu, Hang; Shah, Chinmayee; Levis, Philip

    2016-01-01

    Large scale cloud data analytics applications are often CPU bound. Most of these cycles are wasted: benchmarks written in C++ run 10-51 times faster than frameworks such as Naiad and Spark. However, calling faster implementations from those frameworks only sees moderate (3-5x) speedups because their control planes cannot schedule work fast enough. This paper presents execution templates, a control plane abstraction for CPU-bound cloud applications, such as machine learning. Execution template...

  20. Template synthesis of monodisperse carbon nanodots

    Science.gov (United States)

    Kurdyukov, D. A.; Eurov, D. A.; Stovpiaga, E. Yu.; Kirilenko, D. A.; Konyakhin, S. V.; Shvidchenko, A. V.; Golubev, V. G.

    2016-12-01

    Monodisperse carbon nanodots in pores of mesoporous silica particles are obtained by template synthesis. This method is based on introducing a precursor (organosilane) into pores, its thermal decomposition with formation of carbon nanodots, and the template removal. Structural analysis of the nanomaterial has been performed, which showed that carbon nanodots have an approximately spherical form and a graphite-like structure. According to dynamic light scattering data, the size of carbon nanodots is 3.3 ± 0.9 nm.

  1. Lipid bilayers on nano-templates

    Science.gov (United States)

    Noy, Aleksandr; Artyukhin, Alexander B.; Bakajin, Olgica; Stoeve, Pieter

    2009-08-04

    A lipid bilayer on a nano-template comprising a nanotube or nanowire and a lipid bilayer around the nanotube or nanowire. One embodiment provides a method of fabricating a lipid bilayer on a nano-template comprising the steps of providing a nanotube or nanowire and forming a lipid bilayer around the polymer cushion. One embodiment provides a protein pore in the lipid bilayer. In one embodiment the protein pore is sensitive to specific agents

  2. Multi-template polymerase chain reaction

    Directory of Open Access Journals (Sweden)

    Elena Kalle

    2014-12-01

    Full Text Available PCR is a formidable and potent technology that serves as an indispensable tool in a wide range of biological disciplines. However, due to the ease of use and often lack of rigorous standards many PCR applications can lead to highly variable, inaccurate, and ultimately meaningless results. Thus, rigorous method validation must precede its broad adoption to any new application. Multi-template samples possess particular features, which make their PCR analysis prone to artifacts and biases: multiple homologous templates present in copy numbers that vary within several orders of magnitude. Such conditions are a breeding ground for chimeras and heteroduplexes. Differences in template amplification efficiencies and template competition for reaction compounds undermine correct preservation of the original template ratio. In addition, the presence of inhibitors aggravates all of the above-mentioned problems. Inhibitors might also have ambivalent effects on the different templates within the same sample. Yet, no standard approaches exist for monitoring inhibitory effects in multitemplate PCR, which is crucial for establishing compatibility between samples.

  3. Simplification of Template-free Method to Prepare Polyaniline Nanotubes

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    1 Introduction Conducting polymer nanostructures (e.g.nanotubes or nanofibers) have received considerable attention owing their unique properties and promising applications in technology and nano-devices[1]. Conducting polymer nanostructures can be generally synthesized through "hard" and "soft" template method.Usually an external hard template in a "hard-template" method is required and the post-treatment of removing template is rather tedious."Soft-template" method is advantageous of omitting external...

  4. Conversion of Radiology Reporting Templates to the MRRT Standard.

    Science.gov (United States)

    Kahn, Charles E; Genereaux, Brad; Langlotz, Curtis P

    2015-10-01

    In 2013, the Integrating the Healthcare Enterprise (IHE) Radiology workgroup developed the Management of Radiology Report Templates (MRRT) profile, which defines both the format of radiology reporting templates using an extension of Hypertext Markup Language version 5 (HTML5), and the transportation mechanism to query, retrieve, and store these templates. Of 200 English-language report templates published by the Radiological Society of North America (RSNA), initially encoded as text and in an XML schema language, 168 have been converted successfully into MRRT using a combination of automated processes and manual editing; conversion of the remaining 32 templates is in progress. The automated conversion process applied Extensible Stylesheet Language Transformation (XSLT) scripts, an XML parsing engine, and a Java servlet. The templates were validated for proper HTML5 and MRRT syntax using web-based services. The MRRT templates allow radiologists to share best-practice templates across organizations and have been uploaded to the template library to supersede the prior XML-format templates. By using MRRT transactions and MRRT-format templates, radiologists will be able to directly import and apply templates from the RSNA Report Template Library in their own MRRT-compatible vendor systems. The availability of MRRT-format reporting templates will stimulate adoption of the MRRT standard and is expected to advance the sharing and use of templates to improve the quality of radiology reports.

  5. Synthesis of RNA oligomers on heterogeneous templates

    Science.gov (United States)

    Ertem, G.; Ferris, J. P.

    1996-01-01

    The concept of an RNA world in the chemical origin of life is appealing, as nucleic acids are capable of both information storage and acting as templates that catalyse the synthesis of complementary molecules. Template-directed synthesis has been demonstrated for homogeneous oligonucleotides that, like natural nucleic acids, have 3',5' linkages between the nucleotide monomers. But it seems likely that prebiotic routes to RNA-like molecules would have produced heterogeneous molecules with various kinds of phosphodiester linkages and both linear and cyclic nucleotide chains. Here we show that such heterogeneity need be no obstacle to the templating of complementary molecules. Specifically, we show that heterogeneous oligocytidylates, formed by the montmorillonite clay-catalysed condensation of actuated monomers, can serve as templates for the synthesis of oligoguanylates. Furthermore, we show that oligocytidylates that are exclusively 2',5'-linked can also direct synthesis of oligoguanylates. Such heterogeneous templating reactions could have increased the diversity of the pool of protonucleic acids from which life ultimately emerged.

  6. Automated Template Quantification for DNA Sequencing Facilities

    Science.gov (United States)

    Ivanetich, Kathryn M.; Yan, Wilson; Wunderlich, Kathleen M.; Weston, Jennifer; Walkup, Ward G.; Simeon, Christian

    2005-01-01

    The quantification of plasmid DNA by the PicoGreen dye binding assay has been automated, and the effect of quantification of user-submitted templates on DNA sequence quality in a core laboratory has been assessed. The protocol pipets, mixes and reads standards, blanks and up to 88 unknowns, generates a standard curve, and calculates template concentrations. For pUC19 replicates at five concentrations, coefficients of variance were 0.1, and percent errors were from 1% to 7% (n = 198). Standard curves with pUC19 DNA were nonlinear over the 1 to 1733 ng/μL concentration range required to assay the majority (98.7%) of user-submitted templates. Over 35,000 templates have been quantified using the protocol. For 1350 user-submitted plasmids, 87% deviated by ≥ 20% from the requested concentration (500 ng/μL). Based on data from 418 sequencing reactions, quantification of user-submitted templates was shown to significantly improve DNA sequence quality. The protocol is applicable to all types of double-stranded DNA, is unaffected by primer (1 pmol/μL), and is user modifiable. The protocol takes 30 min, saves 1 h of technical time, and costs approximately $0.20 per unknown. PMID:16461949

  7. Polymer templated nickel cobaltate for energy storage★

    Directory of Open Access Journals (Sweden)

    Albohani Shaymaa

    2017-01-01

    Full Text Available In order to take advantage of the increasing sophistication of technology for harnessing renewable energy resources, serious attention must be paid to how to store and re-access this energy. Electrochemical storage, in the guise of batteries, supercapacitors and pseudocapacitors, has attracted much attention as a viable option for enhanced energy storage applications. But in order for these technologies to be implemented successfully we need to find materials that perform better and are relatively easy to synthesise. Bimetallic transition metal oxides are materials that are readily synthesised and may be multifunctional, i.e. have a role at the electrochemical atomic level as well as the device level. In order for these materials to work efficiently in new generation systems based on sodium and lithium they also need to be mesoporous. This can be achieved by trying to find synthetic techniques that produce specific, highly regulated nanostructures or by adding a ‘templating’ agent during the bulk synthesis step. We have investigated the simple hydrothermal preparation of a number of nickel cobaltate (NiCo2O4 materials using polymer templates, eggshell membrane (ESM and poly methyl methacrylate (PMMA, as potential electrode materials for supercapacitors. The ESM was expected to act as a fibrous, random polymeric template while the PMMA should produce a much more ordered material. Electrochemical testing showed that the different templates have led to changes in material morphology and these have resulted in a difference in electrochemical properties. Templated materials increased specific capacitance compared to non-templated and the choice of template could influence the capacitance by as much as 30%.

  8. Microwave assisted template synthesis of silver nanoparticles

    Indian Academy of Sciences (India)

    K J Sreeram; M Nidhin; B U Nair

    2008-12-01

    Easier, less time consuming, green processes, which yield silver nanoparticles of uniform size, shape and morphology are of interest. Various methods for synthesis, such as conventional temperature assisted process, controlled reaction at elevated temperatures, and microwave assisted process have been evaluated for the kind of silver nanoparticles synthesized. Starch has been employed as a template and reducing agent. Electron microscopy, photon correlation spectroscopy and surface plasmon resonance have been employed to characterize the silver nanoparticles synthesized. Compared to conventional methods, microwave assisted synthesis was faster and provided particles with an average particle size of 12 nm. Further, the starch functions as template, preventing the aggregation of silver nanoparticles.

  9. Templates for Deposition of Microscopic Pointed Structures

    Science.gov (United States)

    Pugel, Diane E.

    2008-01-01

    Templates for fabricating sharply pointed microscopic peaks arranged in nearly regular planar arrays can be fabricated by a relatively inexpensive technique that has recently been demonstrated. Depending on the intended application, a semiconducting, insulating, or metallic film could be deposited on such a template by sputtering, thermal evaporation, pulsed laser deposition, or any other suitable conventional deposition technique. Pointed structures fabricated by use of these techniques may prove useful as photocathodes or field emitters in plasma television screens. Selected peaks could be removed from such structures and used individually as scanning tips in atomic force microscopy or mechanical surface profiling.

  10. Preparation of porous lanthanum phosphate with templates

    Energy Technology Data Exchange (ETDEWEB)

    Onoda, Hiroaki, E-mail: onoda@kpu.ac.jp [Department of Informatics and Environmental Sciences, Faculty of Life and Environmental Sciences, Kyoto Prefectural University, 1-5, Shimogamo Nakaragi-cyo, Sakyo-ku, Kyoto 606-8522 (Japan); Ishima, Yuya [Department of Applied Chemistry, Faculty of Life Sciences, Ritsumeikan University, 1-1-1, Nojihigashi, Kusatsu, Shiga 525-8577 (Japan); Takenaka, Atsushi [Department of Materials Science, Yonago National College of Technology, 4448, Hikona-cho, Yonago, Tottori 683-8502 (Japan); Tanaka, Isao [Department of Materials Science and Engineering, Faculty of Engineering, Kyoto University, Yoshida-Honmachi, Sakyo-ku, Kyoto 606-8501 (Japan)

    2009-08-05

    Malonic acid, propionic acid, glycine, n-butylamine, and urea were added to the preparation of lanthanum phosphate from lanthanum nitrate and phosphoric acid solutions. All additives were taken into lanthanum phosphate particles. The additives that have a basic site were easy to contain in precipitates. The addition of templates improved the specific surface area of lanthanum phosphate. The amount of pore, with radius smaller than 4 nm, increased with the addition of templates. The remained additives had influence on the acidic properties of lanthanum phosphate.

  11. Vertex finding with deformable templates at LHC

    Energy Technology Data Exchange (ETDEWEB)

    Stepanov, N. [European Organization for Nuclear Research, Geneva (Switzerland); Khanov, A. [European Organization for Nuclear Research, Geneva (Switzerland)

    1997-04-11

    We present a novel vertex finding technique. The task is formulated as a discrete-continuous optimisation problem in a way similar to the deformable templates approach for the track finding. Unlike the track finding problem, ``elastic hedgehogs`` rather than elastic arms are used as deformable templates. They are initialised by a set of procedures which provide zero level approximation for vertex positions and track parameters at the vertex point. The algorithm was evaluated using the simulated events for the LHC CMS detector and demonstrated good performance. (orig.).

  12. The biogeochemical cycle of the adsorbed template. II - Selective adsorption of mononucleotides on adsorbed polynucleotide templates

    Science.gov (United States)

    Lazard, Daniel; Lahav, Noam; Orenberg, James B.

    1988-01-01

    Experimental results are presented for the verification of the specific interaction step of the 'adsorbed template' biogeochemical cycle, a simple model for a primitive prebiotic replication system. The experimental system consisted of gypsum as the mineral to which an oligonucleotide template attaches (Poly-C or Poly-U) and (5-prime)-AMP, (5-prime)-GMP, (5-prime)-CMP and (5-prime)-UMP as the interacting biomonomers. When Poly-C or Poly-U were used as adsorbed templates, (5-prime)-GMP and (5-prime)-AMP, respectively, were observed to be the most strongly adsorbed species.

  13. The biogeochemical cycle of the adsorbed template. II - Selective adsorption of mononucleotides on adsorbed polynucleotide templates

    Science.gov (United States)

    Lazard, Daniel; Lahav, Noam; Orenberg, James B.

    1988-01-01

    Experimental results are presented for the verification of the specific interaction step of the 'adsorbed template' biogeochemical cycle, a simple model for a primitive prebiotic replication system. The experimental system consisted of gypsum as the mineral to which an oligonucleotide template attaches (Poly-C or Poly-U) and (5-prime)-AMP, (5-prime)-GMP, (5-prime)-CMP and (5-prime)-UMP as the interacting biomonomers. When Poly-C or Poly-U were used as adsorbed templates, (5-prime)-GMP and (5-prime)-AMP, respectively, were observed to be the most strongly adsorbed species.

  14. Controlling monomer-sequence using supramolecular templates

    OpenAIRE

    ten Brummelhuis, Niels

    2014-01-01

    The transcription and translation of information contained in nucleic acids that has been perfected by nature serves as inspiration for chemists to devise strategies for the creation of polymers with welldefined monomer sequences. In this review the various approaches in which templates (either biopolymers or synthetic ones) are used to influence the monomer-sequence are discussed.

  15. A lightweight approach for biometric template protection

    Science.gov (United States)

    Al-Assam, Hisham; Sellahewa, Harin; Jassim, Sabah

    2009-05-01

    Privacy and security are vital concerns for practical biometric systems. The concept of cancelable or revocable biometrics has been proposed as a solution for biometric template security. Revocable biometric means that biometric templates are no longer fixed over time and could be revoked in the same way as lost or stolen credit cards are. In this paper, we describe a novel and an efficient approach to biometric template protection that meets the revocability property. This scheme can be incorporated into any biometric verification scheme while maintaining, if not improving, the accuracy of the original biometric system. However, we shall demonstrate the result of applying such transforms on face biometric templates and compare the efficiency of our approach with that of the well-known random projection techniques. We shall also present the results of experimental work on recognition accuracy before and after applying the proposed transform on feature vectors that are generated by wavelet transforms. These results are based on experiments conducted on a number of well-known face image databases, e.g. Yale and ORL databases.

  16. Templated Self Assemble of Nano-Structures

    Energy Technology Data Exchange (ETDEWEB)

    Suo, Zhigang [Harvard University

    2013-04-29

    This project will identify and model mechanisms that template the self-assembly of nanostructures. We focus on a class of systems involving a two-phase monolayer of molecules adsorbed on a solid surface. At a suitably elevated temperature, the molecules diffuse on the surface to reduce the combined free energy of mixing, phase boundary, elastic field, and electrostatic field. With no template, the phases may form a pattern of stripes or disks. The feature size is on the order of 1-100 nm, selected to compromise the phase boundary energy and the long-range elastic or electrostatic interaction. Both experimental observations and our theoretical simulations have shown that the pattern resembles a periodic lattice, but has abundant imperfections. To form a perfect periodic pattern, or a designed aperiodic pattern, one must introduce a template to guide the assembly. For example, a coarse-scale pattern, lithographically defined on the substrate, will guide the assembly of the nanoscale pattern. As another example, if the molecules on the substrate surface carry strong electric dipoles, a charged object, placed in the space above the monolayer, will guide the assembly of the molecular dipoles. In particular, the charged object can be a mask with a designed nanoscale topographic pattern. A serial process (e.g., e-beam lithography) is necessary to make the mask, but the pattern transfer to the molecules on the substrate is a parallel process. The technique is potentially a high throughput, low cost process to pattern a monolayer. The monolayer pattern itself may serve as a template to fabricate a functional structure. This project will model fundamental aspects of these processes, including thermodynamics and kinetics of self-assembly, templated self-assembly, and self-assembly on unconventional substrates. It is envisioned that the theory will not only explain the available experimental observations, but also motivate new experiments.

  17. Review of Research on Template Methods in Preparation of Nanomaterials

    Directory of Open Access Journals (Sweden)

    Yadian Xie

    2016-01-01

    Full Text Available The nanomaterials have been widely used in various fields, such as photonics, catalysis, and adsorption, because of their unique physical and chemical properties. Therefore, their production methods are of utmost importance. Compared with traditional synthetic methods, the template method can effectively control the morphology, particle size, and structure during the preparation of nanomaterials, which is an effective method for their synthesis. The key for the template method is to choose different templates, which are divided into hard template and soft template according to their different structures. In this paper, the effects of different types of templates on the morphology of nanomaterials during their preparation are investigated from two aspects: hard template and soft template, combined with the mechanism of action.

  18. Emergency department documentation templates: variability in template selection and association with physical examination and test ordering in dizziness presentations

    Directory of Open Access Journals (Sweden)

    Meurer William J

    2011-03-01

    Full Text Available Abstract Background Clinical documentation systems, such as templates, have been associated with process utilization. The T-System emergency department (ED templates are widely used but lacking are analyses of the templates association with processes. This system is also unique because of the many different template options available, and thus the selection of the template may also be important. We aimed to describe the selection of templates in ED dizziness presentations and to investigate the association between items on templates and process utilization. Methods Dizziness visits were captured from a population-based study of EDs that use documentation templates. Two relevant process outcomes were assessed: head computerized tomography (CT scan and nystagmus examination. Multivariable logistic regression was used to estimate the probability of each outcome for patients who did or did not receive a relevant-item template. Propensity scores were also used to adjust for selection effects. Results The final cohort was 1,485 visits. Thirty-one different templates were used. Use of a template with a head CT item was associated with an increase in the adjusted probability of head CT utilization from 12.2% (95% CI, 8.9%-16.6% to 29.3% (95% CI, 26.0%-32.9%. The adjusted probability of documentation of a nystagmus assessment increased from 12.0% (95%CI, 8.8%-16.2% when a nystagmus-item template was not used to 95.0% (95% CI, 92.8%-96.6% when a nystagmus-item template was used. The associations remained significant after propensity score adjustments. Conclusions Providers use many different templates in dizziness presentations. Important differences exist in the various templates and the template that is used likely impacts process utilization, even though selection may be arbitrary. The optimal design and selection of templates may offer a feasible and effective opportunity to improve care delivery.

  19. Business Process Variability : A Tool for Declarative Template Design

    NARCIS (Netherlands)

    Bulanov, P.; Groefsema, H.; Aiello, M.

    2012-01-01

    To lower both implementation time and cost, many Business Process Management tools use process templates to implement highly recurring processes. However, in order for such templates to be used, a process has to adhere substantially to the template. Therefore, current practice for processes which de

  20. Templated electrodeposition of functional nanostructures: nanowires, nanotubes and nanocubes

    NARCIS (Netherlands)

    Maijenburg, Albert Wouter

    2014-01-01

    This thesis is entitled “Templated electrodeposition of functional nanostructures: nanowires, nanotubes and nanocubes”. Templated electrodeposition is the synthesis technique that was used throughout this thesis, and it comprises the use of a template with specific shape and dimensions for the forma

  1. Carbon Nanotube Templated Asembly of Protein

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Guodong; Lin, Yuehe

    2006-04-01

    This paper describes a novel general strategy for fabricating protein-polyion multilayers by electrostatic layer-by-layer (LBL) self-assembly on a carbon nanotube (CNT) template. Such a noncovalent functionalization method is important for preserving the activity of biomolecules and the mechanical and electrical properties of CNTs. Glucose oxidase and poly (diallydimethylammonium) chloride polymer were used as a model to investigate the LBL process on a CNT template. High-resolution transmission electron microscopy and electrochemical characterization confirm the formation of LBL nanostructures on carboxyl functionalized CNTs. We have also demonstrated the applications of these nanoshell bioreactors to the direct electrochemistry of proteins and biosensing. This strategy can be applied to assemble other biological molecules, such as antibodies, antigens, and DNA, for wide bioassay applications.

  2. Physical synthesis of quantum circuits using templates

    Science.gov (United States)

    Mirkhani, Zahra; Mohammadzadeh, Naser

    2016-10-01

    Similar to traditional CMOS circuits, quantum circuit design flow is divided into two main processes: logic synthesis and physical design. Addressing the limitations imposed on optimization of the quantum circuit metrics because of no information sharing between logic synthesis and physical design processes, the concept of " physical synthesis" was introduced for quantum circuit flow, and a few techniques were proposed for it. Following that concept, in this paper a new approach for physical synthesis inspired by template matching idea in quantum logic synthesis is proposed to improve the latency of quantum circuits. Experiments show that by using template matching as a physical synthesis approach, the latency of quantum circuits can be improved by more than 23.55 % on average.

  3. Metathesis depolymerization for removable surfactant templates.

    Energy Technology Data Exchange (ETDEWEB)

    Zifer, Thomas (Sandia National Laboratories, Livermore, CA); Wheeler, David Roger; Rahimian, Kamayar; McElhanon, James Ross (Sandia National Laboratories, Livermore, CA); Long, Timothy Michael; Jamison, Gregory Marks; Loy, Douglas Anson (Los Alamos National Laboratories, Los Alamos, NM); Kline, Steven R. (National Institute of Standards and Technology, Gaithersburg, MD); Simmons, Blake Alexander (Sandia National Laboratories, Livermore, CA)

    2005-03-01

    Current methodologies for the production of meso- and nanoporous materials include the use of a surfactant to produce a self-assembled template around which the material is formed. However, post-production surfactant removal often requires centrifugation, calcination, and/or solvent washing which can damage the initially formed material architecture(s). Surfactants that can be disassembled into easily removable fragments following material preparation would minimize processing damage to the material structure, facilitating formation of templated hybrid architectures. Herein, we describe the design and synthesis of novel cationic and anionic surfactants with regularly spaced unsaturation in their hydrophobic hydrocarbon tails and the first application of ring closing metathesis depolymerization to surfactant degradation resulting in the mild, facile decomposition of these new compounds to produce relatively volatile nonsurface active remnants.

  4. Deep Human Parsing with Active Template Regression.

    Science.gov (United States)

    Liang, Xiaodan; Liu, Si; Shen, Xiaohui; Yang, Jianchao; Liu, Luoqi; Dong, Jian; Lin, Liang; Yan, Shuicheng

    2015-12-01

    In this work, the human parsing task, namely decomposing a human image into semantic fashion/body regions, is formulated as an active template regression (ATR) problem, where the normalized mask of each fashion/body item is expressed as the linear combination of the learned mask templates, and then morphed to a more precise mask with the active shape parameters, including position, scale and visibility of each semantic region. The mask template coefficients and the active shape parameters together can generate the human parsing results, and are thus called the structure outputs for human parsing. The deep Convolutional Neural Network (CNN) is utilized to build the end-to-end relation between the input human image and the structure outputs for human parsing. More specifically, the structure outputs are predicted by two separate networks. The first CNN network is with max-pooling, and designed to predict the template coefficients for each label mask, while the second CNN network is without max-pooling to preserve sensitivity to label mask position and accurately predict the active shape parameters. For a new image, the structure outputs of the two networks are fused to generate the probability of each label for each pixel, and super-pixel smoothing is finally used to refine the human parsing result. Comprehensive evaluations on a large dataset well demonstrate the significant superiority of the ATR framework over other state-of-the-arts for human parsing. In particular, the F1-score reaches 64.38 percent by our ATR framework, significantly higher than 44.76 percent based on the state-of-the-art algorithm [28].

  5. Multibiometric Systems: Fusion Strategies and Template Security

    Science.gov (United States)

    2008-01-01

    gratitude to Linda Moore, Debbie Kruch, Cathy Davison, Starr Portice, Norma Teague, Kim Thompson, Cathy Sparks, Sue Watson and Adam Pitcher for their...Weighted sum rule Red, Green , Blue channels for face [109] Match score Sum and min rules [166] Feature; match score Feature selection and concatenation...FVC2002-DB2 database, mosaiced template leads to a GAR of 94% and 3The core point was detected using the commercial Neurotechnologija Verifinger software

  6. CPU and GPU (Cuda Template Matching Comparison

    Directory of Open Access Journals (Sweden)

    Evaldas Borcovas

    2014-05-01

    Full Text Available Image processing, computer vision or other complicated opticalinformation processing algorithms require large resources. It isoften desired to execute algorithms in real time. It is hard tofulfill such requirements with single CPU processor. NVidiaproposed CUDA technology enables programmer to use theGPU resources in the computer. Current research was madewith Intel Pentium Dual-Core T4500 2.3 GHz processor with4 GB RAM DDR3 (CPU I, NVidia GeForce GT320M CUDAcompliable graphics card (GPU I and Intel Core I5-2500K3.3 GHz processor with 4 GB RAM DDR3 (CPU II, NVidiaGeForce GTX 560 CUDA compatible graphic card (GPU II.Additional libraries as OpenCV 2.1 and OpenCV 2.4.0 CUDAcompliable were used for the testing. Main test were made withstandard function MatchTemplate from the OpenCV libraries.The algorithm uses a main image and a template. An influenceof these factors was tested. Main image and template have beenresized and the algorithm computing time and performancein Gtpix/s have been measured. According to the informationobtained from the research GPU computing using the hardwarementioned earlier is till 24 times faster when it is processing abig amount of information. When the images are small the performanceof CPU and GPU are not significantly different. Thechoice of the template size makes influence on calculating withCPU. Difference in the computing time between the GPUs canbe explained by the number of cores which they have.

  7. UV NIL template making and imprint evaluation

    Science.gov (United States)

    Sasaki, Shiho; Hiraka, Takaaki; Mizuochi, Jun; Sakai, Yuko; Yusa, Satoshi; Morikawa, Yasutaka; Mohri, Hiroshi; Hayashi, Naoya

    2009-01-01

    UV NIL shows excellent resolution capability with remarkable low line edge roughness, and has been attracting pioneers in the industry who were searching for the finest patterns. We have been focused on the resolution improvement in NIL template making with a 100keV acceleration voltage spot beam EB writer process, and have established a template making process to meet the requirements of the pioneers. Usually such templates needed just a small field (several hundred microns square or so) Now, for several semiconductor devices, the UV NIL is considered not only as a patterning solution for R&D purpose but eventually as a potential candidate for production, and instead of a small field, a full chip field mask is required. Although the 100kV EB writers have excellent resolution capability, they are adopting spot beams (SB) to generate the pattern and have a fatally low throughput if we need full chip writing. In this paper, we are focusing on the 50keV variable shaped beam (VSB) EB writers, which are used in current 4X photomask manufacturing. The 50keV VSB writers can generate full chip pattern in a reasonable time, and by choosing the right patterning material and process, we achieved resolution down to hp28nm, and initial promising results of hp22nm (partial resolution) for line and spaces, and hp26nm for dense holes were observed..

  8. Template learning in morphological neural nets

    Science.gov (United States)

    Davidson, Jennifer L.; Sun, K.

    1991-07-01

    This paper presents an application of morphology neural networks to a template learning problem. Morphology neural networks are a nonlinear version of the familiar artificial neural networks. Typically, an artificial neural net is used to solve pattern classification problems One useful characterization of many neural network algorithms is the ability to 'learn' to respond correctly to new data based only on a selection of known data responses. For example, in the multilayer perceptron model, the 'learning' is a procedure whereby parameters are fed back from output to input neurons and the weights changed to give a better response. The morphological neural net in this paper solves a different type of image processing problem. Specifically, given an input image and an output image which corresponds to a dilated version of the input, one would like to determine what template produced the output. The problem corresponds to teaching the network to solve for the weights in a morphological net, as the weights are the template's values. A reasonable method has been investigated for the boolean case; in this paper results are presented for gray scale images. Image algebra has been shown to provide a succinct expression of neural networks algorithms and also to allow a generalization of neural networks, and thus the authors describe the algorithm in image algebra. The remainder of the paper gives a brief discussion of image algebra, the relationship of image algebra and neural networks, a recap of the dilation morphology neural network boolean for boolean images, and the generalization to grayscale data.

  9. Converting Basic D3 Charts into Reusable Style Templates.

    Science.gov (United States)

    Harper, Jonathan; Agrawala, Maneesh

    2017-02-07

    We present a technique for converting a basic D3 chart into a reusable style template. Then, given a new data source we can apply the style template to generate a chart that depicts the new data, but in the style of the template. To construct the style template we first deconstruct the input D3 chart to recover its underlying structure: the data, the marks and the mappings that describe how the marks encode the data. We then rank the perceptual effectiveness of the deconstructed mappings. To apply the resulting style template to a new data source we first obtain importance ranks for each new data field. We then adjust the template mappings to depict the source data by matching the most important data fields to the most perceptually effective mappings. We show how the style templates can be applied to source data in the form of either a data table or another D3 chart. While our implementation focuses on generating templates for basic chart types (e.g. variants of bar charts, line charts, dot plots, scatterplots, etc.), these are the most commonly used chart types today. Users can easily find such basic D3 charts on the Web, turn them into templates, and immediately see how their own data would look in the visual style (e.g. colors, shapes, fonts, etc.) of the templates. We demonstrate the effectiveness of our approach by applying a diverse set of style templates to a variety of source datasets.

  10. A Neonatal Bimodal MR-CT Head Template

    Science.gov (United States)

    Mohtasebi, Mehrana; Abrishami Moghaddam, Hamid; Grebe, Reinhard; Gity, Masoumeh; Wallois, Fabrice

    2017-01-01

    Neonatal MR templates are appropriate for brain structural analysis and spatial normalization. However, they do not provide the essential accurate details of cranial bones and fontanels-sutures. Distinctly, CT images provide the best contrast for bone definition and fontanels-sutures. In this paper, we present, for the first time, an approach to create a fully registered bimodal MR-CT head template for neonates with a gestational age of 39 to 42 weeks. Such a template is essential for structural and functional brain studies, which require precise geometry of the head including cranial bones and fontanels-sutures. Due to the special characteristics of the problem (which requires inter-subject inter-modality registration), a two-step intensity-based registration method is proposed to globally and locally align CT images with an available MR template. By applying groupwise registration, the new neonatal CT template is then created in full alignment with the MR template to build a bimodal MR-CT template. The mutual information value between the CT and the MR template is 1.17 which shows their perfect correspondence in the bimodal template. Moreover, the average mutual information value between normalized images and the CT template proposed in this study is 1.24±0.07. Comparing this value with the one reported in a previously published approach (0.63±0.07) demonstrates the better generalization properties of the new created template and the superiority of the proposed method for the creation of CT template in the standard space provided by MR neonatal head template. The neonatal bimodal MR-CT head template is freely downloadable from https://www.u-picardie.fr/labo/GRAMFC. PMID:28129340

  11. DNA repair by RNA: Templated, or not templated, that is the question.

    Science.gov (United States)

    Meers, Chance; Keskin, Havva; Storici, Francesca

    2016-08-01

    Cells are continuously exposed to both endogenous and exogenous sources of genomic stress. To maintain chromosome stability, a variety of mechanisms have evolved to cope with the multitude of genetic abnormalities that can arise over the life of a cell. Still, failures to repair these lesions are the driving force of cancers and other degenerative disorders. DNA double-strand breaks (DSBs) are among the most toxic genetic lesions, inhibiting cell ability to replicate, and are sites of mutations and chromosomal rearrangements. DSB repair is known to proceed via two major mechanisms: homologous recombination (HR) and non-homologous end joining (NHEJ). HR reliance on the exchange of genetic information between two identical or nearly identical DNA molecules offers increased accuracy. While the preferred substrate for HR in mitotic cells is the sister chromatid, this is limited to the S and G2 phases of the cell cycle. However, abundant amounts of homologous genetic substrate may exist throughout the cell cycle in the form of RNA. Considered an uncommon occurrence, the direct transfer of information from RNA to DNA is thought to be limited to special circumstances. Studies have shown that RNA molecules reverse transcribed into cDNA can be incorporated into DNA at DSB sites via a non-templated mechanism by NHEJ or a templated mechanism by HR. In addition, synthetic RNA molecules can directly template the repair of DSBs in yeast and human cells via an HR mechanism. New work suggests that even endogenous transcript RNA can serve as a homologous template to repair a DSB in chromosomal DNA. In this perspective, we will review and discuss the recent advancements in DSB repair by RNA via non-templated and templated mechanisms. We will provide current findings, models and future challenges investigating RNA and its role in DSB repair.

  12. Ear Authentication and Template Protection using Bio-key

    Directory of Open Access Journals (Sweden)

    K. Annapurani

    2014-09-01

    Full Text Available Biometric authentication is gaining popularity in the current scenario. Biometric based authentication is the science of using physical or behavioral characteristic for ensuring that the person is the claimed identity. Biometric authentication system is also vulnerable to attacks in various phases. The biometric data stored in the template has to be protected, since variety of attacks like circumvent, covert acquisition affects the normal functioning of the system. An attacker may create new biometric data or steal the template or modify the template. Once the biometric template is compromised then the entire system is lost. So securing biometric template is an important aspect in biometric authentication system. In this study ear biometric template is secured by a new method of generating bio key from the ear fused template. Here the transformed template is stored in the database. During verification phase, for the new biometric sample a bio key is generated. Using this bio key the person is authenticated if the transformed feature generated is matched with the stored one. Hence the template is protected with the bio key. The authenticated person alone can access the system, since the key to decrypt the encrypted template is obtained from the ear trait of the authenticated person. FAR and FRR are used to evaluate the system performance.

  13. Rank-based decompositions of morphological templates.

    Science.gov (United States)

    Sussner, P; Ritter, G X

    2000-01-01

    Methods for matrix decomposition have found numerous applications in image processing, in particular for the problem of template decomposition. Since existing matrix decomposition techniques are mainly concerned with the linear domain, we consider it timely to investigate matrix decomposition techniques in the nonlinear domain with applications in image processing. The mathematical basis for these investigations is the new theory of rank within minimax algebra. Thus far, only minimax decompositions of rank 1 and rank 2 matrices into outer product expansions are known to the image processing community. We derive a heuristic algorithm for the decomposition of matrices having arbitrary rank.

  14. The Contextualization of Archetypes: Clinical Template Governance.

    Science.gov (United States)

    Pedersen, Rune; Ulriksen, Gro-Hilde; Ellingsen, Gunnar

    2015-01-01

    This paper is a status report from a large-scale openEHR-based EPR project from the North Norway Regional Health Authority. It concerns the standardization of a regional ICT portfolio and the ongoing development of a new process oriented EPR systems encouraged by the unfolding of a national repository for openEHR archetypes. Subject of interest; the contextualization of clinical templates is governed over multiple national boundaries which is complex due to the dependency of clinical resources. From the outset of this, we are interested in how local, regional, and national organizers maneuver to standardize while applying OpenEHR technology.

  15. Progress of UV-NIL template making

    Science.gov (United States)

    Hiraka, Takaaki; Mizuochi, Jun; Nakanishi, Yuko; Yusa, Satoshi; Sasaki, Shiho; Morikawa, Yasutaka; Mohri, Hiroshi; Hayashi, Naoya

    2009-04-01

    Nano-imprint lithography (NIL) has been counted as one of the lithography candidates for hp32nm node and beyond and has showed excellent resolution capability with remarkable low line edge roughness that is attracting many researchers in the industry who were searching for the finest patterning technology. Therefore, recently we have been focusing on the resolution improvement on the NIL templates with the 100keV acceleration voltage spot beam (SB) EB writer and the 50keV acceleration voltage variable shaped beam (VSB) EB writer. The 100keV SB writers have high resolution capability, but they show fatally low throughput if we need full chip writing. Usually templates for resolution pioneers needed just a small field (several hundred microns square or so), but recently requirements for full chip templates are increasing. For full chip writing, we have also started the resolution improvement with the 50keV VSB writers used in current 4X photomask manufacturing. The 50keV VSB writers could generate full chip pattern in a reasonable time though resolution limits are inferior to that with the 100keV SB writers. In this paper, we will show latest results with both the 100keV SB and the 50keV VSB EB writers. With the 100keV SB EB writer, we have achieved down to hp15nm resolution for line and space pattern, but found that to achieve further improvement, an innovation in pattern generation method or material would be inevitable. With the 50keV VSB EB writer, we have achieved down to hp22nm resolution for line and space pattern. Though NIL has excellent resolution capability, solutions for defect inspection and repair are not clearly shown yet. In this paper, we will show preliminary inspection results with an EB inspection tool. We tested an EB inspection tool by Hermes Microvision, Inc. (HMI), which was originally developed for and are currently used as a wafer inspection tool, and now have been started to seek the application for mask use, using a programmed defect

  16. Template-directed porous electrodes in electroanalysis.

    Science.gov (United States)

    Walcarius, Alain

    2010-01-01

    Nano- and/or macrostructuring of electrode surfaces has recently emerged as a powerful method of improving the performances of electrochemical devices by enhancing both molecular accessibility and rapid mass transport via diffusion, by increasing the electroactive surface area in comparison to the geometric one, and/or by providing confinement platforms for hosting suitable reagents. This brief overview highlights how template technology offers advantages in terms of designing new types of porous electrodes-mostly based on thin films, and functionalized or not-and discusses their use in analytical chemistry via some recent examples from the literature on electrochemical sensors and biosensors.

  17. Observers change their target template based on expected context.

    Science.gov (United States)

    Bravo, Mary J; Farid, Hany

    2016-04-01

    Previous studies have shown that when observers search repeatedly for a target in a particular context, they may develop a target template that is biased for that context. Because the same target may appear in multiple contexts, we wondered whether observers are able to develop multiple templates for the same target, with each template biased for a particular context. In a series of behavioral experiments, we show that observers can learn multiple target templates for a single target and that they can voluntarily switch among these templates depending on the context they expect to see. Our results suggest that these biased templates may coexist with an unbiased representation of the target, provided they are learned first.

  18. A New Vectorization Technique for Expression Templates in C++

    CERN Document Server

    Progsch, J; Adelmann, A

    2011-01-01

    Vector operations play an important role in high performance computing and are typically provided by highly optimized libraries that implement the BLAS (Basic Linear Algebra Subprograms) interface. In C++ templates and operator overloading allow the implementation of these vector operations as expression templates which construct custom loops at compile time and providing a more abstract interface. Unfortunately existing expression template libraries lack the performance of fast BLAS(Basic Linear Algebra Subprograms) implementations. This paper presents a new approach - Statically Accelerated Loop Templates (SALT) - to close this performance gap by combining expression templates with an aggressive loop unrolling technique. Benchmarks were conducted using the Intel C++ compiler and GNU Compiler Collection to assess the performance of our library relative to Intel's Math Kernel Library as well as the Eigen template library. The results show that the approach is able to provide optimization comparable to the fas...

  19. A nanocluster beacon based on the template transformation of DNA-templated silver nanoclusters.

    Science.gov (United States)

    Teng, Ye; Jia, Xiaofang; Zhang, Shan; Zhu, Jinbo; Wang, Erkang

    2016-01-28

    In this work, we developed a novel light-up nanocluster beacon (NCB) based on shuttling dark silver nanoclusters (NCs) to a bright scaffold through hybridization. The fluorescence enhancement was as high as 70-fold when the two templates were on the opposite sides of the duplexes, enabling sensitive and selective detection of DNA.

  20. Silicon template preparation for the fabrication of thin patterned gold films via template stripping

    Science.gov (United States)

    Schmidl, G.; Dellith, J.; Dellith, A.; Teller, N.; Zopf, D.; Li, G.; Dathe, A.; Mayer, G.; Hübner, U.; Zeisberger, M.; Stranik, O.; Fritzsche, W.

    2015-12-01

    Metallic nanostructures play an important role in the vast field of modern nanophotonics, which ranges from the life sciences to biomedicine and beyond. Gold is a commonly-used and attractive material for plasmonics in the visible wavelength range, most importantly due to its chemical stability. In the present work, we focused on the different methods of plasmonic nanostructure fabrication that possess the greatest potential for cost-efficient fabrication. Initially, reusable (1 0 0) silicon templates were prepared. For this purpose, three different lithography methods (i.e. e-beam, optical, and nanoparticle lithography) were used that correspond to the desired structural scales. The application of a subsequent anisotropic crystal orientation-dependent wet etching process produced well-defined pyramidal structures in a wide variety of sizes, ranging from several microns to less than 100 nm. Finally, a 200 nm-thick gold layer was deposited by means of confocal sputtering on the silicon templates and stripped in order to obtain gold films that feature a surface replica of the initial template structure. The surface roughness that was achieved on the stripped films corresponds well with the roughness of the template used. This makes it possible to prepare cost-efficient high-quality structured films in large quantities with little effort. The gold films produced were thoroughly characterized, particularly with respect to their plasmonic response.

  1. Novel encoding methods for DNA-templated chemical libraries.

    Science.gov (United States)

    Li, Gang; Zheng, Wenlu; Liu, Ying; Li, Xiaoyu

    2015-06-01

    Among various types of DNA-encoded chemical libraries, DNA-templated library takes advantage of the sequence-specificity of DNA hybridization, enabling not only highly effective DNA-templated chemical reactions, but also high fidelity in library encoding. This brief review summarizes recent advances that have been made on the encoding strategies for DNA-templated libraries, and it also highlights their respective advantages and limitations for the preparation of DNA-encoded libraries.

  2. Biocompatibility of Soft-Templated Mesoporous Carbons

    Energy Technology Data Exchange (ETDEWEB)

    Gencoglu, Maria F. [Michigan Technological Univ., Houghton, MI (United States). Dept. of Chemical Engineering; Spurri, Amanda [Widener Univ., Chester, PA (United States). Dept. of Chemical Engineering; Franko, Mitchell [Widener Univ., Chester, PA (United States). Dept. of Chemical Engineering; Chen, Jihua [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Center for Nanophase Materials Science (CNMS); Hensley, Dale K. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Center for Nanophase Materials Science (CNMS); Heldt, Caryn L. [Michigan Technological Univ., Houghton, MI (United States). Dept. of Chemical Engineering; Saha, Dipendu [Widener Univ., Chester, PA (United States). Dept. of Chemical Engineering

    2014-08-21

    We report that soft-templated mesoporous carbon is morphologically a non-nano type of carbon. It is a relatively newer variety of biomaterial, which has already demonstrated its successful role in drug delivery applications. To investigate the toxicity and biocompatibility, we introduced three types of mesoporous carbons with varying synthesis conditions and pore textural properties. We compared the Brunauer–Emmett–Teller (BET) surface area and pore width and performed cytotoxicity experiments with HeLa cells, cell viability studies with fibroblast cells and hemocomapatibility studies. Cytotoxicity tests reveal that two of the carbons are not cytotoxic, with cell survival over 90%. The mesoporous carbon with the highest surface area showed slight toxicity (~70% cell survival) at the highest carbon concentration of 500 μg/mL. Fibroblast cell viability assays suggested high and constant viability of over 98% after 3 days with no apparent relation with materials property and good visible cell-carbon compatibility. No hemolysis (<1%) was confirmed for all the carbon materials. Protein adsorption experiments with bovine serum albumin (BSA) and fibrinogen revealed a lower protein binding capacity of 0.2–0.6 mg/m2 and 2–4 mg/m2 for BSA and fibrinogen, respectively, with lower binding associated with an increase in surface area. The results of this study confirm the biocompatibility of soft-templated mesoporous carbons.

  3. Virus Assemblies as Templates for Nanocircuits

    Energy Technology Data Exchange (ETDEWEB)

    James N Culver; Michael T Harris

    2011-08-31

    The goals of this project were directed at the identification and characterization of bio-mineralization processes and patterning methods for the development of nano scale materials and structures with novel energy and conductive traits. This project utilized a simple plant virus as a model template to investigate methods to attach and coat metals and other inorganic compounds onto biologically based nanotemplates. Accomplishments include: the development of robust biological nanotemplates with enhanced inorganic coating activities; novel coating strategies that allow for the deposition of a continuous inorganic layer onto a bio-nanotemplate even in the absence of a reducing agent; three-dimensional patterning methods for the assemble of nano-featured high aspect ratio surfaces and the demonstrated use of these surfaces in enhancing battery and energy storage applications. Combined results from this project have significantly advanced our understanding and ability to utilize the unique self-assembly properties of biologically based molecules to produce novel materials at the nanoscale level.

  4. Pattern formation in nanoporous titania templates.

    Science.gov (United States)

    Richter, C; Wu, Z; Menon, L

    2007-02-01

    We have carried out a systematic investigation into the formation of nanoscaled patterns in titania (TiO2) templates under dc anodization of Ti in HF acid. At lower acid concentrations (around 0.5 wt% HF) either pores or tubes form at the surface of anodized titanium foil. The pores or nanotubes are separated from the bottom Ti layer by a thin barrier layer of TiO2. The critical voltage where the transition from pores to tubes occurs has been determined. It is observed that the transition voltage shift towards higher voltages as acid concentration is increased, with pore formation disappearing altogether at high acid concentrations. We have also carried out a systematic investigation into the dependence of pore and tube parameters on the applied dc anodization voltage. Our results indicate that the barrier layer thickness, pore and tube length increase as a function of applied voltage.

  5. Automated spectral classification using template matching

    Institute of Scientific and Technical Information of China (English)

    Fu-Qing Duan; Rong Liu; Ping Guo; Ming-Quan Zhou; Fu-Chao Wu

    2009-01-01

    An automated spectral classification technique for large sky surveys is pro-posed. We firstly perform spectral line matching to determine redshift candidates for an observed spectrum, and then estimate the spectral class by measuring the similarity be-tween the observed spectrum and the shifted templates for each redshift candidate. As a byproduct of this approach, the spectral redshift can also be obtained with high accuracy. Compared with some approaches based on computerized learning methods in the liter-ature, the proposed approach needs no training, which is time-consuming and sensitive to selection of the training set. Both simulated data and observed spectra are used to test the approach; the results show that the proposed method is efficient, and it can achieve a correct classification rate as high as 92.9%, 97.9% and 98.8% for stars, galaxies and quasars, respectively.

  6. Using archetypes for defining CDA templates.

    Science.gov (United States)

    Moner, David; Moreno, Alberto; Maldonado, José A; Robles, Montserrat; Parra, Carlos

    2012-01-01

    While HL7 CDA is a widely adopted standard for the documentation of clinical information, the archetype approach proposed by CEN/ISO 13606 and openEHR is gaining recognition as a means of describing domain models and medical knowledge. This paper describes our efforts in combining both standards. Using archetypes as an alternative for defining CDA templates permit new possibilities all based on the formal nature of archetypes and their ability to merge into the same artifact medical knowledge and technical requirements for semantic interoperability of electronic health records. We describe the process followed for the normalization of existing legacy data in a hospital environment, from the importation of the HL7 CDA model into an archetype editor, the definition of CDA archetypes and the application of those archetypes to obtain normalized CDA data instances.

  7. Network Topology Inference from Spectral Templates

    CERN Document Server

    Segarra, Santiago; Mateos, Gonzalo; Ribeiro, Alejandro

    2016-01-01

    We address the problem of identifying a graph structure from the observation of signals defined on its nodes. Fundamentally, the unknown graph encodes direct relationships between signal elements, which we aim to recover from observable indirect relationships generated by a diffusion process on the graph. The fresh look advocated here permeates benefits from convex optimization and stationarity of graph signals, in order to identify the graph shift operator (a matrix representation of the graph) given only its eigenvectors. These spectral templates can be obtained, e.g., from the sample covariance of independent graph signals diffused on the sought network. The novel idea is to find a graph shift that, while being consistent with the provided spectral information, endows the network with certain desired properties such as sparsity. To that end we develop efficient inference algorithms stemming from provably-tight convex relaxations of natural nonconvex criteria, particularizing the results for two shifts: the...

  8. Biologically Inspired Flagella-Templated Silica Nanotubes

    Science.gov (United States)

    Jo, Wonjin

    The desire and need for various types of nanostructures have been met with challenges of feasibility, reproducibility, and long fabrication time. To work towards improved bottom-up methods of nanofabrication, bacterial flagella are particularly attractive bio-templates for nanotubes due to their tubular structures and small inner and outer diameters. In this work, flagella isolated from Salmonella typhimurium are used as bio-templates to fabricate silica mineralized nanotubes. The process involves as well-controlled hydrolysis and condensation reaction with aminopropyltriethoxysilane (APTES), followed by the addition of tetraethoxysilane (TEOS). By controlling the concentration of TEOS and the reaction time, a simple and precise method is developed for creating silica-mineralized flagella nanotubes (SMFNs) with various thicknesses of the silica layer. In addition, the SMFNs are further modified to multifunctional nanotubes by coating metal nanoparticles (NPs) or metal oxide NPs such as gold, palladium, and iron oxide. The metallized SMFNs are achieved through reactions including reductive metallization or oxidative hydrolysis. The results from these studies provide evidence for the complete coating of SMFNs with uniform metal NP sizes and high surface area coverage. The metallized SMFNs are found to be electrically conductive along their network structures. The current-voltage characteristics show remarkably improved electrical conductivities depending on the types of metal NPs loading and SMFN networks concentration. The biologically inspired SMFNs with metal loading will allow have controlled electrical properties that can lead to the potential of creating unique and precise nanoelectronic materials. Lastly, the randomly entangled SMFNs are characterized to demonstrate their capabilities for hydrophilic and hydrophobic surface applications.

  9. Templation in Noncovalent Synthesis of Hydrogen-Bonded Rosettes

    NARCIS (Netherlands)

    Crego-Calama, Mercedes; Reinhoudt, David N.; Cate, ten Matthijs G.J.; Schalley, Christoph A.; Vögtle, Fritz; Dötz, Karl Heinz

    2005-01-01

    In this chapter, hydrogen-bonded assemblies based on the rosette motif are used to describe some examples of templation in noncovalent synthesis. After a brief description of the synthesis and characterization of these assemblies, the guest-templated selection and amplification of the strongest bind

  10. Rapid prototyping drill guide template for lumbar pedicle screw placement

    Institute of Scientific and Technical Information of China (English)

    LU Sheng; XU Yong-qing; ZHANG Yuan-zhi; LI Yan-bing; SHI Ji-hong; CHEN Guo-ping; CHEN Yu-bing

    2009-01-01

    To develop a novel method of spinal pedical stereotaxy by reverse engineering and rapid prototyping techniques, and to validate its accuracy by experimental and clinical studies. Methods: A 3D reconstruction model for the desired lumbar vertebra was generated by using the Mimics 10.11 software, and the optimal screw size and orientation were determined using the reverse engineering software. Afterwards, a drill template was created by reverse engi-neering principle, whose surface was the antitemplate of the vertebral surface. The drill template and its correspond-ing vertebra were manufactured using the rapid prototyping technique. Results: The accuracy of the drill template was con-firmed by drilling screw trajectory into the vertebral biomodel preoperatively. This method also showed its ability to cus-tomize the placement and size of each screw based on the unique morphology of the lumbar vertebra.The drill tem-plate fits the postural surface of the vertebra very well in the cadaver experiment. Postoperative CT scans for controlling the pedicle bore showed that the personalized template had a high precision in cadaver experiment and clinical application. No misplacement occurred by using the per-sonalized template. During surgery, no additional computer assistance was needed.Conclusions: The authors have developed a novel drill template for lumbar pedicle screw placement with good applicability and high accuracy. The potential use of drill templates to place lumbar pedicle screws is promising. Our methodology appears to provide an accurate technique and trajectory for pedicle screw placement in the lumbar spine.

  11. Computer-Aided Template for Model Reuse, Development and Maintenance

    DEFF Research Database (Denmark)

    Fedorova, Marina; Sin, Gürkan; Gani, Rafiqul

    2014-01-01

    A template-based approach for model development is presented in this work. Based on a model decomposition technique, the computer-aided template concept has been developed. This concept is implemented as a software tool , which provides a user-friendly interface for following the workflow steps, ...

  12. Template-Mediated Biomineralization for Bone Tissue Engineering.

    Science.gov (United States)

    Leiendecker, Alexander; Witzleben, Steffen; Schulze, Margit; Tobiasch, Edda

    2017-01-01

    Template-mediated mineralization describes a research field of materials chemistry that deals with templates influencing product formation of foremost inorganic functional materials and composites. These templates are usually organic compounds - as far as molecules with natural origin are involved, the terminology "biomineralization" or "biomimetic mineralization: is used. The present review gives insight into recent developments in the research area of bone-tissue engineering with focus on chemical templates and cell-based approaches. The review is structured as follows: (1) a brief general overview about the principle of templating and recently used template materials, (2) important analytical methods, (3) examples of template-guided mineralization of various bone-related materials, (4) natural bone mineralization, (5) scaffolds for bone-tissue regeneration and (6) cell-based therapeutic approaches. For this purpose, a literature screening with emphasis on promising potential practical applications was performed. In particular, macromolecular structures and polymer composites with relation to naturally occurring compounds were favored. Priority was given to publications of the last five years. Although the present review does not cover the whole topic to full extent, it should provide information about current trends and the most promising approaches in the research area of bone-tissue engineering based on applications of organic templates/scaffolds as well as cell-based strategies. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  13. The Applicability of Interactive Item Templates in Varied Knowledge Types

    Science.gov (United States)

    Koong, Chorng-Shiuh; Wu, Chi-Ying

    2011-01-01

    A well-edited assessment can enhance student's learning motives. Applicability of items, which includes item content and template, plays a crucial role in authoring a good assessment. Templates in discussion contain not only conventional true & false, multiple choice, completion item and short answer but also of those interactive ones. Methods…

  14. Zeta-functions of renormalizable sub-Lorenz templates

    Energy Technology Data Exchange (ETDEWEB)

    Franco, Nuno, E-mail: nmf@uevora.p [CIMA-UE and Department of Mathematics, University of Evora, Rua Romao Ramalho, 59, 7000-671 Evora (Portugal); Silva, Luis, E-mail: lfs@dec.isel.ipl.p [CIMA-UE and Scientific Area of Mathematics, Instituto Superior de Engenharia de Lisboa, Rua Conselheiro Emidio Navarro, 1, 1959-007 Lisboa (Portugal)

    2010-12-15

    We describe the Williams zeta-functions and the twist zeta-functions of sub-Lorenz templates generated by renormalizable Lorenz maps, in terms of the corresponding zeta-functions of the sub-Lorenz templates generated by the renormalized map and by the map that determines the renormalization type.

  15. Design of a process template for amine synthesis

    DEFF Research Database (Denmark)

    Singh, Ravendra; Godfrey, Andy; Gregertsen, Björn;

    A conceptual nitro reduction process template that should be generic such that it can handle a series of substrates with sim ilar molecular functionality has been designed. The reduction process is based on a continuo us plug-flow slurry reactor. The process template aims at speeding up the process...

  16. Transdisciplinary Pedagogical Templates and Their Potential for Adaptive Reuse

    Science.gov (United States)

    Dobozy, Eva; Dalziel, James

    2016-01-01

    This article explores the use and usefulness of carefully designed transdisciplinary pedagogical templates (TPTs) aligned to different learning theories. The TPTs are based on the Learning Design Framework outlined in the Larnaca Declaration (Dalziel et al. in this collection). The generation of pedagogical plans or templates is not new. However,…

  17. The Applicability of Interactive Item Templates in Varied Knowledge Types

    Science.gov (United States)

    Koong, Chorng-Shiuh; Wu, Chi-Ying

    2011-01-01

    A well-edited assessment can enhance student's learning motives. Applicability of items, which includes item content and template, plays a crucial role in authoring a good assessment. Templates in discussion contain not only conventional true & false, multiple choice, completion item and short answer but also of those interactive ones. Methods…

  18. DNA-templated nickel nanostructures and protein assemblies.

    Science.gov (United States)

    Becerril, Hector A; Ludtke, Paul; Willardson, Barry M; Woolley, Adam T

    2006-11-21

    We report a straightforward method for the fabrication of DNA-templated nickel nanostructures on surfaces. These nickel nanomaterials have potential to be applied as nanowires, as templated catalyst lines, as nanoscale magnetic domains, or in directed protein localization. Indeed, we show here that histidine-tagged phosducin-like protein (His-PhLP) binds with high selectivity to both Ni2+-treated surface DNA and DNA-templated nickel metal to create linear protein assemblies on surfaces. The association of His-PhLP with DNA-templated nickel ions or metal is reversible under appropriate rinsing conditions. Nanoscale DNA-templated protein assemblies might be useful in the construction of high-density protein lines for proteomic analysis, for example. Importantly, these nanofabrication procedures are not limited to linear DNA and can be applied readily to other self-assembled DNA topologies.

  19. Nanostructure templating using low temperature atomic layer deposition

    Science.gov (United States)

    Grubbs, Robert K.; Bogart, Gregory R.; Rogers, John A.

    2011-12-20

    Methods are described for making nanostructures that are mechanically, chemically and thermally stable at desired elevated temperatures, from nanostructure templates having a stability temperature that is less than the desired elevated temperature. The methods comprise depositing by atomic layer deposition (ALD) structural layers that are stable at the desired elevated temperatures, onto a template employing a graded temperature deposition scheme. At least one structural layer is deposited at an initial temperature that is less than or equal to the stability temperature of the template, and subsequent depositions made at incrementally increased deposition temperatures until the desired elevated temperature stability is achieved. Nanostructure templates include three dimensional (3D) polymeric templates having features on the order of 100 nm fabricated by proximity field nanopatterning (PnP) methods.

  20. Synthesis of 3D ordered porous polystyrene using silica template

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A rigid colloidal silica template was formed by self-assembly ofthe monodispersed silica spheres prepared according to St-ber method. The silica template is highly ordered, which was verified by bright color effect due to Bragg diffraction and the results of SEM. The free radical polymerization of styrene was allowed within the interstices of the rigid template to result in the formation of the three- dimensional periodic silica/polystyrene nano-composites. The titled porous polystyrene was prepared by chemical decom- position of the template with concentrated aqueous hydro- fluoric acid. Scanning electron microscopy characterization showed that the macroporous polystyrene has ordered arrays of the uniform pores replicated from the template. Moreover, it was found that the morphology of the as-synthesized macroporous polystyrene was greatly affected by the connectivity of the silica spheres treated under different conditions.

  1. A comparison of acetate and digital templating for hip resurfacing.

    Science.gov (United States)

    Bracey, Daniel N; Seyler, Thorsten M; Shields, John S; Leng, Xiaoyan; Jinnah, Riyaz H; Lang, Jason E

    2014-01-01

    This study sought to determine whether templating for metal-on-metal hip resurfacing is more accurate with digital or acetate methodology. The medical records of 102 consecutive patients who underwent hip resurfacing at our institution were retrospectively reviewed. Records lacking preoperative radiographs that included a magnification-establishing marker were excluded, leaving 78 records for study. Two investigators independently prepared acetate and digital templates of the preoperative radiographs, which had been calibrated to 120% magnification, to predict femoral and acetabular component size. Accuracy was measured by comparing the predicted component sizes to the surgically implanted component sizes. Digital templating was more accurate than acetate templating in predicting hip resurfacing component size when measuring accuracy of templates by the absolute error of predicted component sizes (femoral, P hip resurfacing procedures.

  2. Assembly of synthetic Aβ miniamyloids on polyol templates

    Directory of Open Access Journals (Sweden)

    Sebastian Nils Fischer

    2015-12-01

    Full Text Available Covalent dynamic chemistry is used to mimic the first steps of the highly cooperative fibril formation of Aβ peptides. For that purpose, Aβ peptide pentapeptide boronic acids 1 and 2 were synthesized by solid-phase peptide synthesis and studied in esterification experiments with polyhydroxylated templates. The bis-hydroxylated dipeptide Hot=Tap serves as a template of adjustable degree of oligomerization which spontaneously forms boronic esters with peptides of type 1 and 2. Nuclear magnetic resonance can differentiate between regioisomeric boronic esters and identifies preferred sites of esterification on the dimeric template 9. 2-Formylphenylboronic acid (14 is used to link the parent pentapeptide Leu-Val-Phe-Phe-Ala to the template 16 to obtain threefold boronic ester 17. The miniamyloid 17 assembles from seven components by imine and boronic ester bonds between the peptides and the template. The relative orientation and spacing of the peptides mimic the assembly of peptides in Alzheimer β-amyloids.

  3. Assistant template and co-template agents in modeling mesoporous silicas and post-synthesizing organofunctionalizations

    Science.gov (United States)

    Oliveira, Vaeudo V.; Airoldi, Claudio

    2012-12-01

    Mesoporous SBA-16 silicas were synthesized through a direct methodology using the template (F127) combined with co-templates (ethanol and n-butanol), with tetraethylorthosilicate as the silica source. These ordered mesoporous silica were characterized by elemental analyses, infrared spectroscopy, solid-state nuclear magnetic resonance for 13C (CP/MAS) and 29Si (HP/DEC) nuclei, nitrogen sorption/desorption processes, small angle X-ray analyses (SAXS) and transmission electron microscopy (TEM). SAXS and TEM results confirmed the space group Im3m and cubic 3D symmetry, typical for highly ordered SBA-16. The sorption/desorption data for SBA-16 and when functionalized gave type IV isotherms, with hysteresis loop H2. Surface areas of 836; 657 and 618 m2 g-1 and average pore diameters of 7.99; 8.10 and 9.85 nm, for SBA-16A, SBA-16B and SBA-16C were obtained, respectively. When functionalized the silicas presented a reduction in surface area, pore volume and pore diameter due to the pendant chains that interfere with nitrogen sorption in these measurements. The co-template ethanol favors the ordered mesopores with highest wall thicknesses.

  4. Semiconductor nanowires and templates for electronic applications

    Energy Technology Data Exchange (ETDEWEB)

    Ying, Xiang

    2009-07-15

    This thesis starts by developing a platform for the organized growth of nanowires directly on a planar substrate. For this, a method to fabricate horizontal porous alumina membranes is studied. The second part of the thesis focuses on the study of nanowires. It starts by the understanding of the growth mechanisms of germanium nanowires and follows by the structural and electrical properties at the single nanowire level. Horizontally aligned porous anodic alumina (PAA) was used as a template for the nanowire synthesis. Three PAA arrangements were studied: - high density membranes - micron-sized fingers - multi-contacts Membranes formed by a high density of nanopores were obtained by anodizing aluminum thin films. Metallic and semiconducting nanowires were synthesized into the PAA structures via DC deposition, pulsed electro-depostion and CVD growth. The presence of gold, copper, indium, nickel, tellurium, and silicon nanowires inside PAA templates was verified by SEM and EDX analysis. Further, room-temperature transport measurements showed that the pores are completely filled till the bottom of the pores. In this dissertation, single crystalline and core-shell germanium nanowires are synthesized using indium and bismuth as catalyst in a chemical vapor deposition procedure with germane (GeH{sub 4}) as growth precursor. A systematic growth study has been performed to obtain high aspect-ratio germanium nanowires. The influence of the growth conditions on the final morphology and the crystalline structure has been determined via scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM). In the case of indium catalyzed germanium nanowires, two different structures were identified: single crystalline and crystalline core-amorphous shell. The preferential growth axis of both kinds of nanowires is along the [110] direction. The occurrence of the two morphologies was found to only depend on the nanowire dimension. In the case of bismuth

  5. Synthesis of oligoguanylates on oligocytidylate templates. [on primitive earth

    Science.gov (United States)

    Fakhrai, H.; Van Roode, J. H. G.; Orgel, L. E.

    1981-01-01

    The influence of template length in the self-condensation of guanosine 5'-phosphorimidazole in the presence of oligocytidylate templates is investigated. Reactions were carried out with cyclic cytidine 2',3'-phosphate, oligo- or polyC, and radioactively labeled guanosine 5'-phosphorimidazolide in the presence of Zn(+2) or Pb(+2) catalyst; product yields were determined by paper chromatography, thin-layer chromatography, and high-performance liquid chromatography. In the absence of a catalytic metal or in the presence of Pb(+2), a significant template effect is observed starting with the cytidine dimer and increasing in yield up to the hexamer template. Oligomers longer than the template are observed, and are predominantly 2'-5' linked in the presence of Pb(+2) and of mixed linkages in the uncatalyzed reaction. With the zinc ion as the catalyst, the template effect is first observed with the pentamer and is maximal with the heptamer. Products are predominantly 3'-5', and only a small proportion of them are longer than the template. The importance of the demonstrated formation of molecules with up to 10 guanosine units from oligocytidines as short as the dimer on the primitive earth is noted.

  6. Hand Vein Recognition Based on Improved Template Matching

    Directory of Open Access Journals (Sweden)

    Jun Wang

    2014-12-01

    Full Text Available An improved template-construction method for hand vein recognition is presented. The accomplishment of the new algorithm involves several steps. First, we design the power-controlled multispectral vein acquisition handset to establish high-quality hand vein database. Second, we propose an improved valley-shaped enhancement operator with NiBlack algorithm to realize vein segmentation. Third, we get a basic-shaped template after dilation and erosion operation in the four neighborhoods firstly, and then we can get the final matching template combining all the shapes after the process of filling the connected region whose threshold is smaller than the one we set according to the experiment effect. Finally we design the hand vein recognition experiments using the designed template and traditional template respectively. The recognition rate of the improved template is 96.6% under the 1:1 mode and 95.75% under the 1:N mode while the recognition rate of the traditional template is 89.2 under the 1:1 mode and 88.2 under the 1:N mode.

  7. MOCVD epitaxy of InAlN on different templates

    Institute of Scientific and Technical Information of China (English)

    Yun Lijun; Wei Tongbo; Yan Jianchang; Liu Zhe; Wang Junxi; Li Jinmin

    2011-01-01

    InAlN epilayers were grown on high quality GaN and AlN templates with the same growth parameters.Measurement results showed that two samples had the same In content of ~ 16%,while the crystal quality and surface topography of the InA1N epilayer grown on the AlN template,with 282.3" (002) full width at half maximum (FWHM) of rocking curve,313.5" (102) FWHM,surface roughness of 0.39 nm and V-pit density of 2.8 ×108 cm-2,were better than that of the InAlN epilayer grown on the GaN template,309.3",339.1",0.593 nm and 4.2 × 108 cm-2.A primary conclusion was proposed that both the crystal quality and the surface topography of the InAlN epilayer grown on the AlN template were better than that of the InAlN epilayer grown on the GaN template.Therefore,the AlN template was a better choice than the GaN template for getting high quality InA1N epilayers.

  8. Multimodal biometric approach for cancelable face template generation

    Science.gov (United States)

    Paul, Padma Polash; Gavrilova, Marina

    2012-06-01

    Due to the rapid growth of biometric technology, template protection becomes crucial to secure integrity of the biometric security system and prevent unauthorized access. Cancelable biometrics is emerging as one of the best solutions to secure the biometric identification and verification system. We present a novel technique for robust cancelable template generation algorithm that takes advantage of the multimodal biometric using feature level fusion. Feature level fusion of different facial features is applied to generate the cancelable template. A proposed algorithm based on the multi-fold random projection and fuzzy communication scheme is used for this purpose. In cancelable template generation, one of the main difficulties is keeping interclass variance of the feature. We have found that interclass variations of the features that are lost during multi fold random projection can be recovered using fusion of different feature subsets and projecting in a new feature domain. Applying the multimodal technique in feature level, we enhance the interclass variability hence improving the performance of the system. We have tested the system for classifier fusion for different feature subset and different cancelable template fusion. Experiments have shown that cancelable template improves the performance of the biometric system compared with the original template.

  9. Supercoiling of the DNA Template during Transcription

    Science.gov (United States)

    Liu, Leroy F.; Wang, James C.

    1987-10-01

    Transcription of a right-handed double-helical DNA requires a relative rotation of the RNA polymerase and its nascent RNA around the DNA. We describe conditions under which the resistance to the rotational motion of the transcription ensemble around the DNA can be large. In such cases, the advancing polymerase generates positive supercoils in the DNA template ahead of it and negative supercoils behind it. Mutual annihilation of the positively and negatively supercoiled regions may be prevented by anchoring points on the DNA to a large structure, or, in the case of an unanchored plasmid, by the presence of two oppositely oriented transcription units. In prokaryotes, DNA topoisomerase I preferentially removes negative supercoils and DNA gyrase (topoisomerase II) removes positive ones. Our model thus provides an explanation for the experimentally observed high degree of negative or positive supercoiling of intracellular pBR322 DNA when DNA topoisomerase I or gyrase is respectively inhibited. We discuss the implications of our model in terms of supercoiling regulation, DNA conformational transitions, and gene regulation in both prokaryotes and eukaryotes.

  10. Template switching between PNA and RNA oligonucleotides

    Science.gov (United States)

    Bohler, C.; Nielsen, P. E.; Orgel, L. E.; Miller, S. L. (Principal Investigator)

    1995-01-01

    The origin of the RNA world is not easily understood, as effective prebiotic syntheses of the components of RNA, the beta-ribofuranoside-5'-phosphates, are hard to envisage. Recognition of this difficulty has led to the proposal that other genetic systems, the components of which are more easily formed, may have preceded RNA. This raises the question of how transitions between one genetic system and another could occur. Peptide nucleic acid (PNA) resembles RNA in its ability to form double-helical complexes stabilized by Watson-Crick hydrogen bonding between adenine and thymine and between cytosine and guanine, but has a backbone that is held together by amide rather than by phosphodiester bonds. Oligonucleotides bases on RNA are known to act as templates that catalyse the non-enzymatic synthesis of their complements from activated mononucleotides, we now show that RNA oligonucleotides facilitate the synthesis of complementary PNA strands and vice versa. This suggests that a transition between different genetic systems can occur without loss of information.

  11. Software Template for Instruction in Mathematics

    Science.gov (United States)

    Shelton, Robert O.; Moebes, Travis A.; Beall, Anna

    2005-01-01

    Intelligent Math Tutor (IMT) is a software system that serves as a template for creating software for teaching mathematics. IMT can be easily connected to artificial-intelligence software and other analysis software through input and output of files. IMT provides an easy-to-use interface for generating courses that include tests that contain both multiple-choice and fill-in-the-blank questions, and enables tracking of test scores. IMT makes it easy to generate software for Web-based courses or to manufacture compact disks containing executable course software. IMT also can function as a Web-based application program, with features that run quickly on the Web, while retaining the intelligence of a high-level language application program with many graphics. IMT can be used to write application programs in text, graphics, and/or sound, so that the programs can be tailored to the needs of most handicapped persons. The course software generated by IMT follows a "back to basics" approach of teaching mathematics by inducing the student to apply creative mathematical techniques in the process of learning. Students are thereby made to discover mathematical fundamentals and thereby come to understand mathematics more deeply than they could through simple memorization.

  12. Robust structural identification via polyhedral template matching

    Science.gov (United States)

    Mahler Larsen, Peter; Schmidt, Søren; Schiøtz, Jakob

    2016-06-01

    Successful scientific applications of large-scale molecular dynamics often rely on automated methods for identifying the local crystalline structure of condensed phases. Many existing methods for structural identification, such as common neighbour analysis, rely on interatomic distances (or thresholds thereof) to classify atomic structure. As a consequence they are sensitive to strain and thermal displacements, and preprocessing such as quenching or temporal averaging of the atomic positions is necessary to provide reliable identifications. We propose a new method, polyhedral template matching (PTM), which classifies structures according to the topology of the local atomic environment, without any ambiguity in the classification, and with greater reliability than e.g. common neighbour analysis in the presence of thermal fluctuations. We demonstrate that the method can reliably be used to identify structures even in simulations near the melting point, and that it can identify the most common ordered alloy structures as well. In addition, the method makes it easy to identify the local lattice orientation in polycrystalline samples, and to calculate the local strain tensor. An implementation is made available under a Free and Open Source Software license.

  13. Templated Chemically Deposited Semiconductor Optical Fiber Materials

    Science.gov (United States)

    Sparks, Justin R.; Sazio, Pier J. A.; Gopalan, Venkatraman; Badding, John V.

    2013-07-01

    Chemical deposition is a powerful technology for fabrication of planar microelectronics. Optical fibers are the dominant platform for telecommunications, and devices such as fiber lasers are forming the basis for new industries. High-pressure chemical vapor deposition (HPCVD) allows for conformal layers and void-free wires of precisely doped crystalline unary and compound semiconductors inside the micro-to-nanoscale-diameter pores of microstructured optical fibers (MOFs). Drawing the fibers to serve as templates into which these semiconductor structures can be fabricated allows for geometric design flexibility that is difficult to achieve with planar fabrication. Seamless coupling of semiconductor optoelectronic and photonic devices with existing fiber infrastructure thus becomes possible, facilitating all-fiber technological approaches. The deposition techniques also allow for a wider range of semiconductor materials compositions to be exploited than is possible by means of preform drawing. Gigahertz bandwidth junction-based fiber devices can be fabricated from doped crystalline semiconductors, for example. Deposition of amorphous hydrogenated silicon, which cannot be drawn, allows for the exploitation of strong nonlinear optical function in fibers. Finally, crystalline compound semiconductor fiber cores hold promise for high-power infrared light-guiding fiber devices and subwavelength-resolution, large-area infrared imaging.

  14. POROUS MEMBRANE TEMPLATED SYNTHESIS OF POLYMER PILLARED LAYER

    Institute of Scientific and Technical Information of China (English)

    Zhong-wei Niu; Dan Li; Zhen-zhong Yang

    2003-01-01

    The anodic porous alumina membranes with a definite pore diameter and aspect ratio were used as templates to synthesize polymer pillared layer structures. The pillared polymer was produced in the template membrane pores, and the layer on the template surfaces. Rigid cured epoxy resin, polystyrene and soft hydrogel were chosen to confirm the methodology. The pillars were in the form of either tubes or fibers, which were controlled by the alumina membrane pore surface wettability. The structural features were confirmed by scanning electron microscopy results.

  15. Composition Templates in English Writing of the College Entrance Examination

    Institute of Scientific and Technical Information of China (English)

    史秀娟

    2014-01-01

    In recent years, more and more students relay on universal composition templates. Students believe that the"universal composition template" can cope with all kinds of English tests. How the pros and cons of writing methods seem to put things right once and for all? How’s enlightening significance to English teaching? In this paper, based on the two language acquisition theory and analyze the advantages and disadvantages of the composition template, some suggestion are given to the students to im-prove their English writing level.

  16. The biogeochemical cycle of the adsorbed template. I - formation of the template

    Science.gov (United States)

    Lazard, Daniel; Lahav, Noam; Orenberg, J. B.

    1987-01-01

    Experimental results are presented for the verification of the first adsorption step of the 'adsorbed template' biogeochemical cycle, a simple model for a primitive prebiotic replication system. The adsorption of Poly-C, Poly-U, Poly-A, Poly-G, and 5'-AMP, 5'-GMP, 5'-CMP and 5'-UMP onto gypsum was studied. It was found that under the conditions of the experiment, the polymers have a very high affinity for the mineral surface, while the monomers adsorb much less efficiently.

  17. The biogeochemical cycle of the adsorbed template. I - formation of the template

    Science.gov (United States)

    Lazard, Daniel; Lahav, Noam; Orenberg, J. B.

    1987-01-01

    Experimental results are presented for the verification of the first adsorption step of the 'adsorbed template' biogeochemical cycle, a simple model for a primitive prebiotic replication system. The adsorption of Poly-C, Poly-U, Poly-A, Poly-G, and 5'-AMP, 5'-GMP, 5'-CMP and 5'-UMP onto gypsum was studied. It was found that under the conditions of the experiment, the polymers have a very high affinity for the mineral surface, while the monomers adsorb much less efficiently.

  18. Incorporating User Input in Template-Based Segmentation.

    Science.gov (United States)

    Vidal, Camille; Beggs, Dale; Younes, Laurent; Jain, Sanjay K; Jedynak, Bruno

    2011-01-01

    We present a simple and elegant method to incorporate user input in a template-based segmentation method for diseased organs. The user provides a partial segmentation of the organ of interest, which is used to guide the template towards its target. The user also highlights some elements of the background that should be excluded from the final segmentation. We derive by likelihood maximization a registration algorithm from a simple statistical image model in which the user labels are modeled as Bernoulli random variables. The resulting registration algorithm minimizes the sum of square differences between the binary template and the user labels, while preventing the template from shrinking, and penalizing for the inclusion of background elements into the final segmentation. We assess the performance of the proposed algorithm on synthetic images in which the amount of user annotation is controlled. We demonstrate our algorithm on the segmentation of the lungs of Mycobacterium tuberculosis infected mice from μCT images.

  19. Ordered Nanomaterials Thin Films via Supported Anodized Alumina Templates

    Directory of Open Access Journals (Sweden)

    Mohammed eES-SOUNI

    2014-10-01

    Full Text Available Supported anodized alumina template films with highly ordered porosity are best suited for fabricating large area ordered nanostructures with tunable dimensions and aspect ratios. In this paper we first discuss important issues for the generation of such templates, including required properties of the Al/Ti/Au/Ti thin film heterostructure on a substrate for high quality templates. We then show examples of anisotropic nanostructure films consisting of noble metals using these templates, discuss briefly their optical properties and their applications to molecular detection using surface enhanced Raman spectroscopy. Finally we briefly address the possibility to make nanocomposite films, exemplary shown on a plasmonic-thermochromic nanocomposite of VO2-capped Au-nanorods.

  20. [A method for DNA template preparation using a single embryo].

    Science.gov (United States)

    Li, Jun-Feng; Li, Hai-Feng; Song, Yan-Hua; Sun, Yan; Zhang, Jia-Hua

    2005-09-01

    We established a simple method for the preparation of DNA template from a single oocyte or early embryo by KOH/DTT-Triton X disintegration. The PCR amplification efficiency of DNA template prepared by this method was compared with that prepared by TE-proteinase K. Single oocyte, 2-cell embryo, 8-cell embryo, morula or blastocyst were separately treated by KOH/DTT-Triton X, then the DNA template was directly used to amplify mitochondrial DNA segment by PCR. The overall PCR success rate of the 3 pairs of primers was 100% (70/70), while the overall PCR success rate of single oocyte treated by TE-proteinase K was 92.9% (65/70). Difference between the two results was significant (PDNA template of a single early embryo. It needed only one cycle of PCR amplification to get clear aimed DNA stripe and the efficiency was high enough to meet the need of early embryonic genetic material detection.

  1. A concatenated coding scheme for biometric template protection

    NARCIS (Netherlands)

    Shao, Xiaoying; Xu, Haiyun; Veldhuis, Raymond N.J.; Slump, Cornelis H.

    2012-01-01

    Cryptography may mitigate the privacy problem in biometric recognition systems. However, cryptography technologies lack error-tolerance and biometric samples cannot be reproduced exactly, rising the robustness problem. The biometric template protection system needs a good feature extraction algorith

  2. A generic process template for continuous pharmaceutical production

    DEFF Research Database (Denmark)

    Singh, Ravendra; Rozada-Sanches, Raquel; Dean, William

    2012-01-01

    for safer operations (from 50 to 100 L in batch or 3 to 5 L in continuous processes). It is shown that the use of the template together with SAM can lead to potential savings in product development times through flexible and efficient production of Kg amounts of product material for clinical trials......In the work reported here, a conceptual generic continuous process template for pharmaceutical production is presented. The template is demonstrated on a nitro reduction case study that should in principle be generic such that it can handle a series of substrates with similar molecular...... functionality. To assist in adoption of different substrates, a systematic substrate adoption methodology (SAM) has also been developed. The objective of the generic process template together with the SAM is to provide flexibility as well as increased efficiency to continuous processes while reducing inventory...

  3. Template-Framework Interactions in Tetraethylammonium-Directed Zeolite Synthesis

    NARCIS (Netherlands)

    Schmidt, Joel E.; Fu, Donglong; Deem, Michael W.; Weckhuysen, Bert M.

    2016-01-01

    Zeolites, having widespread applications in chemical industries, are often synthesized using organic templates. These can be cost-prohibitive, motivating investigations into their role in promoting crystallization. Herein, the relationship between framework structure, chemical composition, synthesis

  4. Involute Spur Gear Template Development by Parametric Technique ...

    African Journals Online (AJOL)

    ... Gear Template Development by Parametric Technique Using Computer Aided Design. ... cylindrical coordinate systems to create the involute curve profile. Since spur gear geometry is controlled by a few basic parameters, a generic gear

  5. Alumina Template-Dependant Growth of Cobalt Nanowire Arrays

    Directory of Open Access Journals (Sweden)

    L. Malferrari

    2009-01-01

    Full Text Available Different electrochemical regimes and porous alumina were applied for template synthesis of cobalt nanowire (nw arrays, revealing several peculiar cases. In contrast to quite uniform filling of sulfuric acid alumina templates by alternating current deposition, nonuniform growth of the Co nw tufts and mushrooms was obtained for the case of oxalic acid templates. We showed herein for the first time that such configurations arise from the spontaneous growth of cobalt nw groups evolving from the cobalt balls at the Al/alumina interface. Nevertheless, the uniform growth of densely packed cobalt nw arrays, up to tens of micrometers in length, was obtained via long-term direct current galvanostatic deposition at low current density using oxalic acid templates one-side coated by conducting layer. The unique point of this regime is the formation of hexagonal lattice Co nws with a preferred (100 growth direction.

  6. Statement of Bureau representative [template] [Laguna Atascosa National Wildlife Refuge

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This document is a template used for the statement of the bureau representative and the public hearing for the Laguna Atascosa National Wildlife Refuge Wilderness...

  7. GPP Webinar: Solar Procurement Templates and Tools for Higher Education

    Science.gov (United States)

    Green Power Partnership webinar on solar procurement for Higher Education which features various tools and templates that schools can use to shape and manage the solar procurement process to a successful outcome.

  8. Template matching techniques in computer vision theory and practice

    CERN Document Server

    Brunelli, Roberto

    2009-01-01

    The detection and recognition of objects in images is a key research topic in the computer vision community.  Within this area, face recognition and interpretation has attracted increasing attention owing to the possibility of unveiling human perception mechanisms, and for the development of practical biometric systems. This book and the accompanying website, focus on template matching, a subset of object recognition techniques of wide applicability, which has proved to be particularly effective for face recognition applications. Using examples from face processing tasks throughout the book to illustrate more general object recognition approaches, Roberto Brunelli: examines the basics of digital image formation, highlighting points critical to the task of template matching;presents basic and  advanced template matching techniques, targeting grey-level images, shapes and point sets;discusses recent pattern classification paradigms from a template matching perspective;illustrates the development of a real fac...

  9. Dental rehabilitation of amelogenesis imperfecta using thermoformed templates.

    Science.gov (United States)

    Sockalingam, Snmp

    2011-01-01

    Amelogenesis imperfecta represents a group of dental developmental conditions that are genomic in origin. Hypoplastic AI, hypomineralised AI or both in combination were the most common types seen clinically. This paper describes oral rehabilitation of a 9-year-old Malay girl with inherited hypoplastic AI using transparent thermoforming templates. The defective surface areas were reconstructed to their original dimensions on stone cast models of the upper and lower arches using composite, and transparent thermoform templates were fabricated on the models. The templates were used as crown formers to reconstruct the defective teeth clinically using esthetically matching composite. The usage of the templates allowed direct light curing of the composite, accurate reproducibility of the anatomic contours of the defective teeth, reduced chair-side time and easy contouring and placement of homogenous thickness of composite in otherwise inaccessible sites of the affected teeth.

  10. Particulate templates and ordered liquid bridge networks in evaporative lithography.

    Science.gov (United States)

    Vakarelski, Ivan U; Kwek, Jin W; Tang, Xiaosong; O'Shea, Sean J; Chan, Derek Y C

    2009-12-01

    We investigate the properties of latex particle templates required to optimize the development of ordered liquid bridge networks in evaporative lithography. These networks are key precursors in the assembly of solutions of conducting nanoparticles into large, optically transparent, and conducting microwire networks on substrates (Vakarelski, I. U.; Chan, D. Y. C.; Nonoguchi, T.; Shinto, H.; Higashitani, K. Phys. Rev. Lett., 2009, 102, 058303). An appropriate combination of heat treatment and oxygen plasma etching of a close-packed latex particle monolayer is shown to create open-spaced particle templates which facilitates the formation of ordered fully connected liquid bridge networks that are critical to the formation of ordered microwire networks. Similar results can also be achieved if non-close-packed latex particle templates with square or honeycomb geometries are used. The present results have important implications for the development of the particulate templates to control the morphology of functional microwire networks by evaporative lithography.

  11. A Survey On Various Web Template Detection And Extraction Methods

    Directory of Open Access Journals (Sweden)

    Neethu Mary Varghese

    2015-03-01

    Full Text Available Abstract In todays digital world reliance on the World Wide Web as a source of information is extensive. Users increasingly rely on web based search engines to provide accurate search results on a wide range of topics that interest them. The search engines in turn parse the vast repository of web pages searching for relevant information. However majority of web portals are designed using web templates which are designed to provide consistent look and feel to end users. The presence of these templates however can influence search results leading to inaccurate results being delivered to the users. Therefore to improve the accuracy and reliability of search results identification and removal of web templates from the actual content is essential. A wide range of approaches are commonly employed to achieve this and this paper focuses on the study of the various approaches of template detection and extraction that can be applied across homogenous as well as heterogeneous web pages.

  12. Dental rehabilitation of amelogenesis imperfecta using thermoformed templates

    Directory of Open Access Journals (Sweden)

    SNMP Sockalingam

    2011-01-01

    Full Text Available Amelogenesis imperfecta represents a group of dental developmental conditions that are genomic in origin. Hypoplastic AI, hypomineralised AI or both in combination were the most common types seen clinically. This paper describes oral rehabilitation of a 9-year-old Malay girl with inherited hypoplastic AI using transparent thermoforming templates. The defective surface areas were reconstructed to their original dimensions on stone cast models of the upper and lower arches using composite, and transparent thermoform templates were fabricated on the models. The templates were used as crown formers to reconstruct the defective teeth clinically using esthetically matching composite. The usage of the templates allowed direct light curing of the composite, accurate reproducibility of the anatomic contours of the defective teeth, reduced chair-side time and easy contouring and placement of homogenous thickness of composite in otherwise inaccessible sites of the affected teeth.

  13. Improving your target-template alignment with MODalign.

    KAUST Repository

    Barbato, Alessandro

    2012-02-04

    SUMMARY: MODalign is an interactive web-based tool aimed at helping protein structure modelers to inspect and manually modify the alignment between the sequences of a target protein and of its template(s). It interactively computes, displays and, upon modification of the target-template alignment, updates the multiple sequence alignments of the two protein families, their conservation score, secondary structure and solvent accessibility values, and local quality scores of the implied three-dimensional model(s). Although it has been designed to simplify the target-template alignment step in modeling, it is suitable for all cases where a sequence alignment needs to be inspected in the context of other biological information. AVAILABILITY AND IMPLEMENTATION: Freely available on the web at http://modorama.biocomputing.it/modalign. Website implemented in HTML and JavaScript with all major browsers supported. CONTACT: jan.kosinski@uniroma1.it.

  14. The need of appropriate brain SPECT templates for SPM comparisons

    Energy Technology Data Exchange (ETDEWEB)

    Morbelli, S.; Altrinetti, V.; Piccardo, A. [S Martino Univ Hosp, Nucl MedUnit DIMI, I-16132 Genoa (Italy); Rodriguez, G.; Brugnolo, A.; Nobili, F. [S Martino Univ Hosp, Clin Neurophysiol Unit DiSEM, DiTeC, I-16132 Genoa (Italy); Mignone, A. [Osped Riuniti Bergamo, Nucl Med Unit, I-24100 Bergamo (Italy); Pupi, A. [Univ Florence, Nucl Med Unit DFP, Florence (Italy); Koulibaly, P.M. [CEA-Univ Nice Sophia Antipolis, TIRO, Dept Nucl Med, Ctr Antoine Lacassagne, Nice (France)

    2008-07-01

    Statistical parametric mapping (SPM) is used worldwide to compare brain perfusion single photon emission computed tomography (SPECT) data. The default template within the SPM package used for SPECT image normalization includes images of a group of healthy subjects studied with {sup 99m}TcHMPAO. Since [{sup 99m}Tc] HMPAO and [{sup 99m}Tc] ECD have shown to distribute differently in SPECT studies, we formulated the hypothesis that comparing set of [{sup 99m}Tc]ECD data normalized by means of a [{sup 99m}Tc]HMPAO template may lead to incorrect results. A customized [{sup 99m}Tc]ECD template was built with SPECT and magnetic resonance imaging (MRI) images of 22 neurologically healthy women. Then, two sets of subjects, i.e. a group of patients with very early Alzheimer's disease (eAD) and a matched control group, studied by means of [{sup 99m}Tc]ECD SPECT, were chosen for comparisons. The same statistical approach (t-test between eAD patients and controls and correlation analysis between brain SPECT and a cognitive score) was applied twice, i.e. after normalization with either the default [{sup 99m}Tc]HMPAO template or the customized [{sup 99m}Tc]ECD template. In the comparison between eAD and controls, a cluster of difference in the posterior-cingulate gyrus of both hemispheres was only highlighted when using the customized [{sup 99m}Tc]ECD template, but was missed when using the default [{sup 99m}Tc]HMPAO template. In the correlation between brain perfusion and a cognitive score, the significant cluster was more significant and far more extended, also including the right superior temporal gyrus, using the customized [{sup 99m}Tc]ECD template than using the default [{sup 99m}Tc]HMPAO template. These data suggest the need of customized, radiopharmaceutical-matched SPECT templates to be used within the SPM package. The present customized [{sup 99m}Tc]ECD template is now freely available on the web. (authors)

  15. Template Matching Approach to Signal Prediction

    Science.gov (United States)

    Mackey, Ryan; Kulikov, Igor

    2010-01-01

    A new approach to signal prediction and prognostic assessment of spacecraft health resolves an inherent difficulty in fusing sensor data with simulated data. This technique builds upon previous work that demonstrated the importance of physics-based transient models to accurate prediction of signal dynamics and system performance. While models can greatly improve predictive accuracy, they are difficult to apply in general because of variations in model type, accuracy, or intended purpose. However, virtually any flight project will have at least some modeling capability at its disposal, whether a full-blown simulation, partial physics models, dynamic look-up tables, a brassboard analogue system, or simple hand-driven calculation by a team of experts. Many models can be used to develop a predict, or an estimate of the next day s or next cycle s behavior, which is typically used for planning purposes. The fidelity of a predict varies from one project to another, depending on the complexity of the simulation (i.e. linearized or full differential equations) and the level of detail in anticipated system operation, but typically any predict cannot be adapted to changing conditions or adjusted spacecraft command execution. Applying a predict blindly, without adapting the predict to current conditions, produces mixed results at best, primarily due to mismatches between assumed execution of spacecraft activities and actual times of execution. This results in the predict becoming useless during periods of complicated behavior, exactly when the predict would be most valuable. Each spacecraft operation tends to show up as a transient in the data, and if the transients are misaligned, using the predict can actually harm forecasting performance. To address this problem, the approach here expresses the predict in terms of a baseline function superposed with one or more transient functions. These transients serve as signal templates, which can be relocated in time and space against

  16. Biosynthetic Polypeptides as Templates in Materials Design

    Science.gov (United States)

    Kiick, Kristi

    2007-03-01

    Biosynthetic routes to protein-based polymeric materials offer important opportunities for the production of well-defined macromolecular templates, owing to the control of sequence and molecular weight inherent in the biosynthesis of proteins. In particular, the biosynthesis of polypeptides with controlled presentation of functional groups in multiple positions, coupled with their subsequent chemical modification with biologically relevant ligands, will permit the production of well-defined, bioactive macromolecules that may provide insight into biological binding events in which multivalent binding is important. Modification of the well-defined macromolecules with ligands such as saccharides has application in the study of events such as toxin neutralization and mediation of the immune and inflammatory responses. In this work, alanine-rich polypeptides of both random coil and helical conformations, equipped with glutamic acid residues to impart chemical versatility, have been produced via biosynthetic strategies. Analysis via spectroscopic and calorimetric methods indicates that the polypeptides adopt helical, beta-sheet, or random-coil conformations that can be controlled with variations in temperature, pH, and salt concentration; the conformational behavior of the polypeptides is not compromised upon chemical modification with saccharides. The binding of these macromolecules to bacterial toxins has been characterized via immunochemical and spectroscopic methods; results indicate that specific architectural features of the glycopolymer scaffold cause changes in the binding of these molecules to multivalent receptors. Given the chemical flexibility in the design of such scaffolds, they can be modified with many different moieties in addition to saccharides, so multiple opportunities exist for their application in areas where control of active side chains is important, such as in biomaterials, electronic devices, and bioinorganic structures.

  17. An Empirical Ultraviolet Iron Spectrum Template Applicable to Active Galaxies

    DEFF Research Database (Denmark)

    Vestergaard, Marianne; Wilkes, B. J.

    2001-01-01

    Iron emission is often a severe contaminant in optical-ultraviolet spectra of active galaxies. Its presence complicates emission line studies. A viable solution, already successfully applied at optical wavelengths, is to use an empirical iron emission template. We have generated FeII and FeIII te......, including iron transitions. Details of the data processing, generation, and use of the templates, are given by Vestergaard & Wilkes (2001)....

  18. Chemical Strategies for Template Syntheses of Composite Micro and Nanostructures.

    Science.gov (United States)

    2007-11-02

    syntheses can be accomplished within the pores of the alumina templates to make semiconductor tubules (27). Figure 5 shows that Ti02 tubules prepared...surface area forms have higher photo efficiencies (28). Ti02 /conductor nanocomposites may prove to be useful photocatalysts because the template...synthesized Ti02 nanostructures have very high surface areas (27). Furthermore, as discussed previously, each outer tubular Ti02 catalyst particle has

  19. Templating as a Chain of Custody Tool for Arms Control

    Energy Technology Data Exchange (ETDEWEB)

    Benz, Jacob M.; Tanner, Jennifer E.; Duckworth, Leesa L.

    2013-06-01

    Historically, templates have been considered for use as a treaty accountable item (TAI) authentication tool, alongside item attributes. Because of this, the use of templates has fallen by the wayside due to the perceived intrusiveness of and handling/storage of template data; especially when compared to the negotiability of unclassified attribute threshold values. However, as a chain of custody tool, templates potentially have a large and important role to play in maintaining confidence in the authenticity of the treaty accountable items as they progress through an arms control regime. In general terms, templating is the process of creating a unique, measurable, and repeatable signature which is representative of the TAI. At any point in time, the signature can be re-measured or re-inspected to verify the signature has not changed. Chain of custody is the process by which a controlled boundary is established and maintained around a TAI to both deter and detect unauthorized access to the item. Typically, this is accomplished by putting a tamper indicating device (TID) on the item or container. The TID now acts as a surrogate for the item itself, and is continually checked to ensure the unique identifier and tamper indicating mechanisms have not changed since last inspection. This in and of itself is a form of templating. A stronger template is one that utilizes a signature of the combined item and container. There are many potential signatures which may be exploited, including radiation-, electromagnetic-, and acoustic-based signatures. This paper/presentation will explore the technology and mechanisms in which templating can be applied to create a more robust chain of custody over treaty accountable items as part of a future arms control regime.

  20. Track finding with deformable templates — the elastic arms approach

    Science.gov (United States)

    Ohlsson, Mattias; Peterson, Carsten; Yuille, Alan L.

    1992-08-01

    A novel algorithm for particle tracking is presented and evaluated. It is based on deformable templates that converge using a deterministic annealing algorithm. These deformable templates are initialized by Hough transforms. The algorithm, which effectively represents a merger between neuronic decision making and parameter fitting, naturally lends itself to parallel execution. Very good performance is obtained for both non-magnetic and magnetic tracks. For the latter simulated TPC tracks from the CERN DELPHI detector are used.

  1. Preparation of mesoporous aluminophosphate usingpoly(amido amine) as template

    Institute of Scientific and Technical Information of China (English)

    ZHANG Xiaofeng; LIN Shen; CHEN Xinqing; CHEN Jiebo; YANG Liuyi; LUO Minghong

    2007-01-01

    Mesoporous aluminophosphate was prepared by using G4.0 poly(amido amine)dendrimer as a template and characterized by Fourier transform infrared spectrometer(FTIR), X-ray diffraction (XRD), transmission electron microscopy (TEM) and N2 adsorption/desorption methods.Results show that the title compound exhibits a typical mesoporous structure with the average pore size from 5 to 8 nm. The formation mechanism of the nanoporous structure using dendrimer as a template was also discussed.

  2. Surfactant-templating of Ordered Mesoporous Polymers and Carbons

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    1 Results Ordered mesoporous materials possess enormous potential for many high-tech applications[1] such as bioreactors, microelectrophoresis, thermal insulation and catalysts. In general, organic porous materials can be prepared by phase-separation and hard templating approach such as those employing colloidal particles[2]. However, due to the volume contraction and swelling, and the structured defects formed during template removal, most of the resulting porous polymer structures are disordered with ...

  3. II - Template Metaprogramming for Massively Parallel Scientific Computing - Vectorization with Expression Templates

    CERN Document Server

    CERN. Geneva

    2016-01-01

    Large scale scientific computing raises questions on different levels ranging from the fomulation of the problems to the choice of the best algorithms and their implementation for a specific platform. There are similarities in these different topics that can be exploited by modern-style C++ template metaprogramming techniques to produce readable, maintainable and generic code. Traditional low-level code tend to be fast but platform-dependent, and it obfuscates the meaning of the algorithm. On the other hand, object-oriented approach is nice to read, but may come with an inherent performance penalty. These lectures aim to present he basics of the Expression Template (ET) idiom which allows us to keep the object-oriented approach without sacrificing performance. We will in particular show to to enhance ET to include SIMD vectorization. We will then introduce techniques for abstracting iteration, and introduce thread-level parallelism for use in heavy data-centric loads. We will show to to apply these methods i...

  4. III - Template Metaprogramming for massively parallel scientific computing - Templates for Iteration; Thread-level Parallelism

    CERN Document Server

    CERN. Geneva

    2016-01-01

    Large scale scientific computing raises questions on different levels ranging from the fomulation of the problems to the choice of the best algorithms and their implementation for a specific platform. There are similarities in these different topics that can be exploited by modern-style C++ template metaprogramming techniques to produce readable, maintainable and generic code. Traditional low-level code tend to be fast but platform-dependent, and it obfuscates the meaning of the algorithm. On the other hand, object-oriented approach is nice to read, but may come with an inherent performance penalty. These lectures aim to present he basics of the Expression Template (ET) idiom which allows us to keep the object-oriented approach without sacrificing performance. We will in particular show to to enhance ET to include SIMD vectorization. We will then introduce techniques for abstracting iteration, and introduce thread-level parallelism for use in heavy data-centric loads. We will show to to apply these methods i...

  5. A Geometric Particle Filter for Template-Based Visual Tracking.

    Science.gov (United States)

    Junghyun Kwon; Hee Seok Lee; Park, Frank C; Kyoung Mu Lee

    2014-04-01

    Existing approaches to template-based visual tracking, in which the objective is to continuously estimate the spatial transformation parameters of an object template over video frames, have primarily been based on deterministic optimization, which as is well-known can result in convergence to local optima. To overcome this limitation of the deterministic optimization approach, in this paper we present a novel particle filtering approach to template-based visual tracking. We formulate the problem as a particle filtering problem on matrix Lie groups, specifically the three-dimensional Special Linear group SL(3) and the two-dimensional affine group Aff(2). Computational performance and robustness are enhanced through a number of features: (i) Gaussian importance functions on the groups are iteratively constructed via local linearization; (ii) the inverse formulation of the Jacobian calculation is used; (iii) template resizing is performed; and (iv) parent-child particles are developed and used. Extensive experimental results using challenging video sequences demonstrate the enhanced performance and robustness of our particle filtering-based approach to template-based visual tracking. We also show that our approach outperforms several state-of-the-art template-based visual tracking methods via experiments using the publicly available benchmark data set.

  6. The Affordance Template ROS Package for Robot Task Programming

    Science.gov (United States)

    Hart, Stephen; Dinh, Paul; Hambuchen, Kimberly

    2015-01-01

    This paper introduces the Affordance Template ROS package for quickly programming, adjusting, and executing robot applications in the ROS RViz environment. This package extends the capabilities of RViz interactive markers by allowing an operator to specify multiple end-effector waypoint locations and grasp poses in object-centric coordinate frames and to adjust these waypoints in order to meet the run-time demands of the task (specifically, object scale and location). The Affordance Template package stores task specifications in a robot-agnostic XML description format such that it is trivial to apply a template to a new robot. As such, the Affordance Template package provides a robot-generic ROS tool appropriate for building semi-autonomous, manipulation-based applications. Affordance Templates were developed by the NASA-JSC DARPA Robotics Challenge (DRC) team and have since successfully been deployed on multiple platforms including the NASA Valkyrie and Robonaut 2 humanoids, the University of Texas Dreamer robot and the Willow Garage PR2. In this paper, the specification and implementation of the affordance template package is introduced and demonstrated through examples for wheel (valve) turning, pick-and-place, and drill grasping, evincing its utility and flexibility for a wide variety of robot applications.

  7. Geometric Templates for Improved Tracking Performance in Monte Carlo Codes

    Science.gov (United States)

    Nease, Brian R.; Millman, David L.; Griesheimer, David P.; Gill, Daniel F.

    2014-06-01

    One of the most fundamental parts of a Monte Carlo code is its geometry kernel. This kernel not only affects particle tracking (i.e., run-time performance), but also shapes how users will input models and collect results for later analyses. A new framework based on geometric templates is proposed that optimizes performance (in terms of tracking speed and memory usage) and simplifies user input for large scale models. While some aspects of this approach currently exist in different Monte Carlo codes, the optimization aspect has not been investigated or applied. If Monte Carlo codes are to be realistically used for full core analysis and design, this type of optimization will be necessary. This paper describes the new approach and the implementation of two template types in MC21: a repeated ellipse template and a box template. Several different models are tested to highlight the performance gains that can be achieved using these templates. Though the exact gains are naturally problem dependent, results show that runtime and memory usage can be significantly reduced when using templates, even as problems reach realistic model sizes.

  8. Silver nanowires-templated metal oxide for broadband Schottky photodetector

    Science.gov (United States)

    Patel, Malkeshkumar; Kim, Hong-Sik; Park, Hyeong-Ho; Kim, Joondong

    2016-04-01

    Silver nanowires (AgNWs)-templated transparent metal oxide layer was applied for Si Schottky junction device, which remarked the record fastest photoresponse of 3.4 μs. Self-operating AgNWs-templated Schottky photodetector showed broad wavelength photodetection with high responsivity (42.4 A W-1) and detectivity (2.75 × 1015 Jones). AgNWs-templated indium-tin-oxide (ITO) showed band-to-band excitation due to the internal photoemission, resulting in significant carrier collection performances. Functional metal oxide layer was formed by AgNWs-templated from ITO structure. The grown ITO above AgNWs has a cylindrical shape and acts as a thermal protector of AgNWs for high temperature environment without any deformation. We developed thermal stable AgNWs-templated transparent oxide devices and demonstrated the working mechanism of AgNWs-templated Schottky devices. We may propose the high potential of hybrid transparent layer design for various photoelectric applications, including solar cells.

  9. Inhibition of non-templated nucleotide addition by DNA polymerases in primer extension using twisted intercalating nucleic acid modified templates.

    Science.gov (United States)

    Güixens-Gallardo, Pedro; Hocek, Michal; Perlíková, Pavla

    2016-01-15

    A simple and elegant method for inhibition of non-templated nucleotide addition by DNA polymerases and for following DNA 3'-heterogeneity in enzymatic DNA synthesis by primer extension (PEX) is described. When template bearing ortho-twisted intercalating nucleic acid (ortho-TINA) at the 5'-end is used, non-templated nucleotide addition is reduced in both the A- and B-family DNA polymerases (KOD XL, KOD (exo-), Bst 2.0, Therminator, Deep Vent (exo-) and Taq). Formation of a single oligonucleotide product was observed with ortho-TINA modified template and KOD XL, KOD (exo-), Bst 2.0, Deep Vent (exo-) and Taq DNA polymerases. This approach can be applied to the synthesis of both unmodified and base-modified oligonucleotides. Copyright © 2015 Elsevier Ltd. All rights reserved.

  10. Anatomical standardization of small animal brain FDG-PET images using synthetic functional template: experimental comparison with anatomical template.

    Science.gov (United States)

    Coello, Christopher; Hjornevik, Trine; Courivaud, Frédéric; Willoch, Frode

    2011-07-15

    Anatomical standardization (also called spatial normalization) of positron emission tomography (PET) small animal brain images is required to make statistical comparisons across individuals. Frequently, PET images are co-registered to an individual MR or CT image of the same subject in order to transform the functional images to an anatomical space. In the present work, we evaluate the normalization of synthetic PET (synPET) images to a synthetic PET template. To provide absolute error in terms of pixel misregistration, we created a synthetic PET image from the individual MR image through segmentation of the brain into gray and white matter which produced functional and anatomical images in the same space. When comparing spatial normalization of synPET images to a synPET template with the gold standard (MR images to an MR template), a mean translation error of 0.24mm (±0.20) and a maximal mean rotational error of 0.85° (±0.91) were found. Significant decrease in misregistration error was measured when achieving spatial normalization of functional images to a functional template instead of an anatomical template. This accuracy strengthens the use of standardization methods where individual PET images are registered to a customized PET template in order to statistically assess physiological changes in rat brains.

  11. Nanoparticle Array Assembly Using Chemical Templates

    Science.gov (United States)

    Adams, Sarah Marie

    This dissertation demonstrates chemically-driven self-assembly techniques to produce assemblies of closely-spaced metal nanoparticles from colloidal nanoparticle solution in order to engineer enhanced optical fields. Planar nanoparticle assemblies provide a platform for a multitude of applications and material architectures. With nanoscale inter-particle spacing, metallic nanoparticles enable increased efficiency of photovoltaic devices due to light focusing and enhancement of electromagnetic fields useful for optical sensing of molecules due to coupling of the plasmon resonance in nanoparticle gaps. For molecular sensors, development of self-assembled two-dimensional assemblies of closely-spaced nanoparticles is useful for producing surface plasmon resonance sensors and surface-enhanced Raman spectroscopy (SERS) based sensing. Using chemical self-assembly, monodisperse, colloidal gold nanoparticles were attached on self-organized polymer templates in order to pattern assemblies of nanoparticle clusters with sub-10 nanometer inter-particle spacing. First citrate-stabilized Au nanoparticles were functionalized with thioctic acid ligands in solution. Then poly(methyl methacrylate) domains in phase-separated poly(styrene-block-methyl methacrylate) (PS-b-PMMA) thin films were chemically modified with surface amine functional groups. Au nanoparticles were preferentially attached to the functionalized PMMA surface domains using cross-linking chemistry. This method allows for versatility of size, shape, and composition. In this dissertation, we demonstrated attachment of 5, 10, and 20 nm Au and 20 nm Ag nanoparticles. PS-b-PMMA thin films also exhibit versatility of domain size and morphology by varying polymer molecular weights. The nanoparticle diameter to PMMA domain size ratio influenced the cluster size. As the ratio decreased, larger clusters were observed on PMMA domains with increased frequency. SERS measurement of nanoparticle assemblies showed uniform signal

  12. Digital templating in primary total hip and knee arthroplasty.

    Science.gov (United States)

    Levine, Brett; Fabi, David; Deirmengian, Carl

    2010-11-02

    The use of digital radiography is becoming more prevalent in orthopedics. This transition impacts the ability to preoperatively plan for implants in total hip arthroplasty (THA) and total knee arthroplasty (TKA). This article reports on the clinical success of digital templating using the Advanced Case Plan (Stryker Imaging, Flower Mound, Texas) system in primary THA and TKA. Digital radiographs of 269 consecutive patients undergoing primary THA (93 cases) or TKA (176 cases) were templated using the Advanced Case Plan digital software package. A 25.4-mm metallic sphere was used as a calibrating marker. Anteroposterior hip and lateral knee radiographs were digitally templated preoperatively and compared to the actual size of the implants at the time of surgery. The accuracy of calibrating images using the metallic sphere was validated by measuring the diameter of femoral heads on 25 postoperative hip radiographs. Digital templating was accurate in predicting the correct implant size in 58.5% of THAs and 66% of TKAs. In 93% of THAs and 98.5% of TKAs, preoperative templating was within 1 size of the final implant. There were no cases in which the predicted implant size varied from the final components by >2 sizes. Calibrating the image using the metallic sphere marker was found to be highly accurate, predicting the correct femoral head size within 1.5 mm in all 25 cases (7 hemiarthroplasties and 18 THAs). Digital templating is an effective means for predicting the size of THA and TKA components, thus remaining a viable option as we transition into the modern era of digital radiography. Future studies will evaluate interobserver reliability and the impact of level of training on templating accuracy. Copyright 2010, SLACK Incorporated.

  13. The Utility of Template Analysis in Qualitative Psychology Research.

    Science.gov (United States)

    Brooks, Joanna; McCluskey, Serena; Turley, Emma; King, Nigel

    2015-04-03

    Thematic analysis is widely used in qualitative psychology research, and in this article, we present a particular style of thematic analysis known as Template Analysis. We outline the technique and consider its epistemological position, then describe three case studies of research projects which employed Template Analysis to illustrate the diverse ways it can be used. Our first case study illustrates how the technique was employed in data analysis undertaken by a team of researchers in a large-scale qualitative research project. Our second example demonstrates how a qualitative study that set out to build on mainstream theory made use of the a priori themes (themes determined in advance of coding) permitted in Template Analysis. Our final case study shows how Template Analysis can be used from an interpretative phenomenological stance. We highlight the distinctive features of this style of thematic analysis, discuss the kind of research where it may be particularly appropriate, and consider possible limitations of the technique. We conclude that Template Analysis is a flexible form of thematic analysis with real utility in qualitative psychology research.

  14. Template identification technology of nuclear warheads and components

    Institute of Scientific and Technical Information of China (English)

    Liu Su-Ping; Gong Jian; Hao Fan-Hua; Hu Guang-Chun

    2008-01-01

    Template identification technology (TIT) is designed for the scenarios where a batch of disarmed nuclear weapons or components would be dismantled to observe a nuclear disarmament treaty.The core function played by the TIT is to make a judgment on whether the verified item belongs to a certain kind of nuclear weapons or component (NW/NC) or to which kind the verified item belongs.This paper analyses the functions played by the TIT in the process of NW/NC dismantlement,and proposes that two phases would be followed when applying the TIT:firstly to establish NW/NC templates with a sample of size n drawn from a certain kind of disarmament NW;secondly to authenticate NW/NC by means of the TIT.This paper also expatiates some terms related to the concept of the TIT and investigates on the development status of NW/NC TIT based on radiation signatures.The study concludes that the design of template structure is crucial to the establishment of an effective TIT and that starting from different research angles and aiming at the same goal of classification different template structures and corresponding template identification methods can be built up to meet specific identification requirements.

  15. DNA-templated nanowires as sacrificial materials for creating nanocapillaries

    Science.gov (United States)

    Stewart, Jacob T.; Becerril, Hector A.; Yang, Weichun; Larsen, Megan G.; Woolley, Adam T.

    2008-08-01

    DNA has shown great promise as a template for the controlled localization of various materials and the construction of wires with nanometer-dimension cross sections. We have recently developed a strategy for fabrication of nanocapillaries, using DNA-templated nanowires as a sacrificial material. We first form metal nanowires through the selective electrochemical deposition of nickel atop a surface-aligned DNA molecule. We then deposit a thin layer of silicon dioxide on top of the DNA nanostructures. Next, we photolithographically pattern openings over the ends of the wires and etch through the silicon dioxide layer to expose the metal nanowires. Finally, we etch out the DNA-templated nickel nanowires. This process results in the formation of nanocapillaries having the same dimensions as the originally formed DNA-templated nanowires. We have characterized these DNA-templated nanocapillaries using atomic force microscopy, optical microscopy and scanning electron microscopy. These constructs have potential for application in nanofluidics, power generation, sample preconcentration, and chemical sensing.

  16. Attempted nonenzymatic template-directed oligomerizations on a polyadenylic acid template: implications for the nature of the first genetic material

    Science.gov (United States)

    Stribling, R.; Miller, S. L.

    1991-01-01

    Previous attempts to produce nonenzymatic template-directed oligomerizations of activated pyrimidines on polypurine templates have been unsuccessful. The only efficient reactions are those where the template is composed primarily of pyrimidines, especially cytosine. Because molecular evolution requires that a synthesized daughter polynucleotide be capable of acting as a template for the synthesis of the original polynucleotide, the one-way replication achieved thus far is inadequate to initiate an evolving system. Several uracil analogs were used in this investigation in order to search for possible replacements for uracil. The monomers used in this investigation were the imidazolides of UMP, xanthosine 5'-monophosphate, the bis-monophosphates of the acyclic nucleosides of uracil, and 2,4-quinazolinedione. The concentrations of various salts, buffers, pH, and temperature were among the different variables investigated in attempts to find conditions that would permit template-directed oligomerizations. Although the different monomers in this study demonstrated varying abilities to form very short oligomers, we were unable to detect any enhancement of this oligomerization that could be attributed to the poly(A) template. Although special conditions might be found that would allow purine-rich templates to work, these reactions cannot be considered robust. The results of our experiments suggest that pyrimidines were not part of the original replicating system on the primitive Earth. It has already been shown that ribose is an unlikely component of the first replicating systems, and we now suggest that phosphate was absent as well. This is due to the low solubility of phosphate in the present ocean (3 x 10(-6) M), as well as the difficulty of prebiotic activation of phosphates.

  17. Template free synthesis of natural carbohydrates functionalised fluorescent silver nanoclusters.

    Science.gov (United States)

    Ebrahiminezhad, Alireza; Berenjian, Aydin; Ghasemi, Younes

    2016-06-01

    Template-assisted synthesis is one of the most recognised techniques for fabrication of silver nanoclusters (AgNCs). However, this process is time consuming, toxic and expensive. In this study, the authors report a completely novel approach for the green and facile synthesis of AgNCs using Matricaria chamomilla, without any additional template. Fluorescent and colloidally stable AgNCs with average particle size of 2.4 nm were successfully produced. They found that carbohydrates from Matricaria chamomilla act as an ideal template to generate fluorescent AgNCs. Moreover, oxygen-bearing functional groups were validated to be the active groups for anchoring and reducing of Ag(+) ions. The novel carbohydrate coating method makes the prepared nanoclusters completely hydrophilic and stable in aqueous matrices.

  18. Automatic script identification from images using cluster-based templates

    Energy Technology Data Exchange (ETDEWEB)

    Hochberg, J.; Kerns, L.; Kelly, P.; Thomas, T.

    1995-02-01

    We have developed a technique for automatically identifying the script used to generate a document that is stored electronically in bit image form. Our approach differs from previous work in that the distinctions among scripts are discovered by an automatic learning procedure, without any handson analysis. We first develop a set of representative symbols (templates) for each script in our database (Cyrillic, Roman, etc.). We do this by identifying all textual symbols in a set of training documents, scaling each symbol to a fixed size, clustering similar symbols, pruning minor clusters, and finding each cluster`s centroid. To identify a new document`s script, we identify and scale a subset of symbols from the document and compare them to the templates for each script. We choose the script whose templates provide the best match. Our current system distinguishes among the Armenian, Burmese, Chinese, Cyrillic, Ethiopic, Greek, Hebrew, Japanese, Korean, Roman, and Thai scripts with over 90% accuracy.

  19. Templates for Cross-Cultural and Culturally Specific Usability Testing

    DEFF Research Database (Denmark)

    Clemmensen, Torkil

    2011-01-01

    The cultural diversity of users of technology challenges our methods for usability testing. This article suggests templates for cross-culturally and culturally specific usability testing, based on studies of usability testing in companies in Mumbai, Beijing, and Copenhagen. Study 1 was a cross...... tests. The result was the construction of templates for usability testing. The culturally specific templates were in Mumbai “user-centered evaluation,” Copenhagen “client-centered evaluation,” and Beijing “evaluator-centered evaluation.” The findings are compared with related research......-cultural field study of think-aloud testing done by usability vendor companies in the three countries. The result was a grounded theory of cultural variations in the production of a usability problem list. Study 2 was a follow-up, ethnographic interview study of how the companies typically perform usability...

  20. Spike Detection Based on Normalized Correlation with Automatic Template Generation

    Directory of Open Access Journals (Sweden)

    Wen-Jyi Hwang

    2014-06-01

    Full Text Available A novel feedback-based spike detection algorithm for noisy spike trains is presented in this paper. It uses the information extracted from the results of spike classification for the enhancement of spike detection. The algorithm performs template matching for spike detection by a normalized correlator. The detected spikes are then sorted by the OSortalgorithm. The mean of spikes of each cluster produced by the OSort algorithm is used as the template of the normalized correlator for subsequent detection. The automatic generation and updating of templates enhance the robustness of the spike detection to input trains with various spike waveforms and noise levels. Experimental results show that the proposed algorithm operating in conjunction with OSort is an efficient design for attaining high detection and classification accuracy for spike sorting.

  1. Template engaged synthesis of hollow ceria-based composites

    Science.gov (United States)

    Chen, Guozhu; Rosei, Federico; Ma, Dongling

    2015-03-01

    Hollow ceria-based composites, which consist of noble metal nanoparticles or metal oxides as a secondary component, are being studied extensively for potential applications in heterogeneous catalysis. This is due to their unique features, which exhibit the advantages of a hollow structure (e.g. high surface area and low weight), and also integrate the properties of ceria and noble metals/metal oxides. More importantly, the synergistic effect between constituents in hollow ceria-based composites has been demonstrated in various catalytic reactions. In this feature article, we summarize the state-of-the-art in the synthesis of hollow ceria-based composites, including traditional hard-templates and more recently, sacrificial-template engaged strategies, highlighting the key role of selected templates in the formation of hollow composites. In addition, the catalytic applications of hollow ceria-based composites are briefly surveyed. Finally, challenges and perspectives on future advances of hollow ceria-based composites are outlined.

  2. Electroless Fabrication of Cobalt Alloys Nanowires within Alumina Template

    Directory of Open Access Journals (Sweden)

    Nazila Dadvand

    2007-01-01

    Full Text Available A new method of nanowire fabrication based on electroless deposition process is described. The method is novel compared to the current electroless procedure used in making nanowires as it involves growing nanowires from the bottom up. The length of the nanowires was controlled at will simply by adjusting the deposition time. The nanowires were fabricated within the nanopores of an alumina template. It was accomplished by coating one side of the template by a thin layer of palladium in order to activate the electroless deposition within the nanopores from bottom up. However, prior to electroless deposition process, the template was pretreated with a suitable wetting agent in order to facilitate the penetration of the plating solution through the pores. As well, the electroless deposition process combined with oblique metal evaporation process within a prestructured silicon wafer was used in order to fabricate long nanowires along one side of the grooves within the wafer.

  3. Mesoporous silica and organosilica films templated by nanocrystalline chitin.

    Science.gov (United States)

    Nguyen, Thanh-Dinh; Shopsowitz, Kevin E; MacLachlan, Mark J

    2013-11-04

    Liquid crystalline phases can be used to impart order into inorganic solids, creating materials that mimic natural architectures. Herein, mesoporous silica and organosilica films with layered structures and high surface areas have been templated by nanocrystalline chitin. Aqueous suspensions of spindle-shaped chitin nanocrystals were prepared by sequential deacetylation and hydrolysis of chitin fibrils isolated from king crab shells. The nanocrystalline chitin self-assembles into a nematic liquid-crystalline phase that has been used to template silica and organosilica composites. Removal of the chitin template by either calcination or sulfuric-acid-catalyzed hydrolysis gave mesoporous silica and ethylene-bridged organosilica films. The large, crack-free mesoporous films have layered structures with features that originate from the nematic organization of the nanocrystalline chitin.

  4. Template-Directed Biopolymerization: Tape-Copying Turing Machines

    Science.gov (United States)

    Sharma, Ajeet K.; Chowdhury, Debashish

    2012-10-01

    DNA, RNA and proteins are among the most important macromolecules in a living cell. These molecules are polymerized by molecular machines. These natural nano-machines polymerize such macromolecules, adding one monomer at a time, using another linear polymer as the corresponding template. The machine utilizes input chemical energy to move along the template which also serves as a track for the movements of the machine. In the Alan Turing year 2012, it is worth pointing out that these machines are "tape-copying Turing machines". We review the operational mechanisms of the polymerizer machines and their collective behavior from the perspective of statistical physics, emphasizing their common features in spite of the crucial differences in their biological functions. We also draw the attention of the physics community to another class of modular machines that carry out a different type of template-directed polymerization. We hope this review will inspire new kinetic models for these modular machines.

  5. Conducting Polymer Nanostructures: Template Synthesis and Applications in Energy Storage

    Directory of Open Access Journals (Sweden)

    Lijia Pan

    2010-07-01

    Full Text Available Conducting polymer nanostructures have received increasing attention in both fundamental research and various application fields in recent decades. Compared with bulk conducting polymers, conducting polymer nanostructures are expected to display improved performance in energy storage because of the unique properties arising from their nanoscaled size: high electrical conductivity, large surface area, short path lengths for the transport of ions, and high electrochemical activity. Template methods are emerging for a sort of facile, efficient, and highly controllable synthesis of conducting polymer nanostructures. This paper reviews template synthesis routes for conducting polymer nanostructures, including soft and hard template methods, as well as its mechanisms. The application of conducting polymer mesostructures in energy storage devices, such as supercapacitors and rechargeable batteries, are discussed.

  6. Conducting polymer nanostructures: template synthesis and applications in energy storage.

    Science.gov (United States)

    Pan, Lijia; Qiu, Hao; Dou, Chunmeng; Li, Yun; Pu, Lin; Xu, Jianbin; Shi, Yi

    2010-07-02

    Conducting polymer nanostructures have received increasing attention in both fundamental research and various application fields in recent decades. Compared with bulk conducting polymers, conducting polymer nanostructures are expected to display improved performance in energy storage because of the unique properties arising from their nanoscaled size: high electrical conductivity, large surface area, short path lengths for the transport of ions, and high electrochemical activity. Template methods are emerging for a sort of facile, efficient, and highly controllable synthesis of conducting polymer nanostructures. This paper reviews template synthesis routes for conducting polymer nanostructures, including soft and hard template methods, as well as its mechanisms. The application of conducting polymer mesostructures in energy storage devices, such as supercapacitors and rechargeable batteries, are discussed.

  7. Kinetic theory and thermodynamics of template-directed copolymerization

    Science.gov (United States)

    Gaspard, Pierre

    2017-02-01

    Template-directed copolymerization is the fundamental process for the replication, transcription, and translation of genetic information. The copy of the template sequence is grown by the attachment of monomers with a molecular machine. The long-time kinetics of such processes is exactly solvable in terms of iterated function systems. This method determines the effects of sequence heterogeneity and replication errors on the growth of the copy and the statistical properties of its sequence. In particular, a transition can occur between linear and sublinear growth in time of the copy. In the linear regime, the local growth velocity along the template may have a fractal distribution. Furthermore, the growth can be driven around equilibrium by the entropic effect of replication errors in an adverse free-energy landscape.

  8. Implementation Support of Security Design Patterns Using Test Templates

    Directory of Open Access Journals (Sweden)

    Masatoshi Yoshizawa

    2016-06-01

    Full Text Available Security patterns are intended to support software developers as the patterns encapsulate security expert knowledge. However, these patterns may be inappropriately applied because most developers are not security experts, leading to threats and vulnerabilities. Here we propose a support method for security design patterns in the implementation phase of software development. Our method creates a test template from a security design pattern, consisting of an “aspect test template” to observe the internal processing and a “test case template”. Providing design information creates a test from the test template with a tool. Because our test template is reusable, it can easily perform a test to validate a security design pattern. In an experiment involving four students majoring in information sciences, we confirm that our method can realize an effective test, verify pattern applications, and support pattern implementation.

  9. 3D-printed guiding templates for improved osteosarcoma resection

    Science.gov (United States)

    Ma, Limin; Zhou, Ye; Zhu, Ye; Lin, Zefeng; Wang, Yingjun; Zhang, Yu; Xia, Hong; Mao, Chuanbin

    2016-03-01

    Osteosarcoma resection is challenging due to the variable location of tumors and their proximity with surrounding tissues. It also carries a high risk of postoperative complications. To overcome the challenge in precise osteosarcoma resection, computer-aided design (CAD) was used to design patient-specific guiding templates for osteosarcoma resection on the basis of the computer tomography (CT) scan and magnetic resonance imaging (MRI) of the osteosarcoma of human patients. Then 3D printing technique was used to fabricate the guiding templates. The guiding templates were used to guide the osteosarcoma surgery, leading to more precise resection of the tumorous bone and the implantation of the bone implants, less blood loss, shorter operation time and reduced radiation exposure during the operation. Follow-up studies show that the patients recovered well to reach a mean Musculoskeletal Tumor Society score of 27.125.

  10. Geometrical assembly of ultrastable protein templates for nanomaterials

    Science.gov (United States)

    Glover, Dominic J.; Giger, Lars; Kim, Steve S.; Naik, Rajesh R.; Clark, Douglas S.

    2016-06-01

    The fabrication of nanoscale devices requires architectural templates on which to position functional molecules in complex arrangements. Protein scaffolds are particularly promising templates for nanomaterials due to inherent molecular recognition and self-assembly capabilities combined with genetically encoded functionalities. However, difficulties in engineering protein quaternary structure into stable and well-ordered shapes have hampered progress. Here we report the development of an ultrastable biomolecular construction kit for the assembly of filamentous proteins into geometrically defined templates of controllable size and symmetry. The strategy combines redesign of protein-protein interaction specificity with the creation of tunable connector proteins that govern the assembly and projection angles of the filaments. The functionality of these nanoarchitectures is illustrated by incorporation of nanoparticles at specific locations and orientations to create hybrid materials such as conductive nanowires. These new structural components facilitate the manufacturing of nanomaterials with diverse shapes and functional properties over a wide range of processing conditions.

  11. A geometric transformation to protect minutiae-based fingerprint templates

    Science.gov (United States)

    Sutcu, Yagiz; Sencar, Husrev T.; Memon, Nasir

    2007-04-01

    The increasing use of biometrics in different environments presents new challenges. Most importantly, biometric data are irreplaceable. Therefore, storing biometric templates, which is unique to individual user, entails significant security risks. In this paper, we propose a geometric transformation for securing the minutiae based fingerprint templates. The proposed scheme employs a robust one-way transformation that maps geometrical configuration of the minutiae points into a fixed-length code vector. This representation enables efficient alignment and reliable matching. Experiments are conducted by applying the proposed method on a synthetically generated minutiae point sets. Preliminary results show that the proposed scheme provides a simple and effective solution to the template security problem of the minutiae based fingerprint.

  12. Fabrication of YBCO nanowires with anodic aluminum oxide (AAO) template

    Energy Technology Data Exchange (ETDEWEB)

    Dadras, Sedigheh, E-mail: dadras@alzahra.ac.ir; Aawani, Elaheh

    2015-10-15

    We have fabricated YBCO nanowires by using anodic aluminum oxide (AAO) template and sol–gel method, to investigate the fundamental properties of the one-dimensional nanostructure YBCO high-temperature superconductor and enhance its applications. The field-emission scanning electron microscopy and X-ray diffraction pattern results have shown forming of Y-123 nanowires in the template. As an outcome, the YBCO nanowires, prepared by dipping AAO template into YBCO sol method, have average diameter of about 38 nm and length of 1 μm; this is an optimum nanowire sample with larger diameter and length. The resistance–temperature measurement indicates that the onset critical temperature of these samples occurs at 91 K, and the resistance of the optimum sample at onset transition is 10 times lower than the other sample.

  13. Nanoline templates for single atom wires on Si(001)

    Energy Technology Data Exchange (ETDEWEB)

    Koester, Sigrun A.; Owen, James H.G.; Bianco, Francois; Mazur, Daniel; Renner, Chrisoph [Universite de Geneve, Section Physique/DPMC, Geneve (Switzerland); Rodriguez-Prieto, Alvaro; Bowler, David R. [London Centre for Nanotechnology (LCN), University College London (United Kingdom)

    2010-07-01

    Low dimensional structures are of wide scientific and technological interest. The physics of single atom metallic wires is already described in detail by theory, but a more systematic experimental verification is still desirable. The experimental problems are mainly caused by the difficulties of growing electronically isolated wires which is necessary to test the expected properties from existing theories. Here we introduce templates on a Si(001) surface which enable the growth of self-assembled single atom wires on top of them. The main template consists of a Si reconstruction called the Haiku structure which develops underneath self-assembled Bi nanowires. By hydrogenation the Si surface can be passivated and additionally the Bi dimers are stripped off while the underlying reconstruction of the Si surface remains intact. In addition the Bi nanowire by itself can be considered as a template.

  14. A non-parametric 2D deformable template classifier

    DEFF Research Database (Denmark)

    Schultz, Nette; Nielsen, Allan Aasbjerg; Conradsen, Knut;

    2005-01-01

    We introduce an interactive segmentation method for a sea floor survey. The method is based on a deformable template classifier and is developed to segment data from an echo sounder post-processor called RoxAnn. RoxAnn collects two different measures for each observation point, and in this 2D...... feature space the ship-master will be able to interactively define a segmentation map, which is refined and optimized by the deformable template algorithms. The deformable templates are defined as two-dimensional vector-cycles. Local random transformations are applied to the vector-cycles, and stochastic...... relaxation in a Bayesian scheme is used. In the Bayesian likelihood a class density function and its estimate hereof is introduced, which is designed to separate the feature space. The method is verified on data collected in Øresund, Scandinavia. The data come from four geographically different areas. Two...

  15. Hierarchical Template Matching for Robust Visual Tracking with Severe Occlusions

    Institute of Scientific and Technical Information of China (English)

    Lizuo Jin; Tirui Wu; Feng Liu; Gang Zeng

    2012-01-01

    To tackle the problem of severe occlusions in visual tracking, we propose a hierarchical template-matching method based on a layered appearance model. This model integrates holistic- and part-region matching in order to locate an object in a coarse-to-fine manner. Furthermore, in order to reduce ambiguity in object localization, only the discriminative parts of an object' s appearance template are chosen for similarity computing with respect to their cornerness measurements. The similarity between parts is computed in a layer-wise manner, and from this, occlusions can be evaluated. When the object is partly occluded, it can be located accurately by matching candidate regions with the appearance template. When it is completely occluded, its location can be predicted from its historical motion information using a Kalman filter. The proposed tracker is tested on several practical image sequences, and the experimental results show that it can consistently provide accurate object location for stable tracking, even for severe occlusions.

  16. Template synthesis, characterization and transformations of iron nanowires while aging

    Energy Technology Data Exchange (ETDEWEB)

    Jagminas, Arunas [Institute of Chemistry, A. Gostauto 9, LT-01108 Vilnius (Lithuania)], E-mail: jagmin@ktl.mii.lt; Mazeika, Kestutis; Reklaitis, Jonas [Institute of Physics, Savanoriu 231, LT-02300 Vilnius (Lithuania); Kurtinaitiene, Marija [Institute of Chemistry, A. Gostauto 9, LT-01108 Vilnius (Lithuania); Baltrunas, Dalis [Institute of Physics, Savanoriu 231, LT-02300 Vilnius (Lithuania)

    2008-05-15

    Densely packed arrays of various materials demonstrating enhanced magnetic properties remain of great interest nowadays. In this study, transmission electron microscopy (TEM), Moessbauer spectroscopy (MS) and powder X-ray diffraction (XRD) were used to characterize the morphology, composition and phase of iron nanowires (nws) deposited from the developed solution within alumina template pores of the average diameter of ca.15 nm by the alternating current (ac) electrolysis protocol. The same investigations were performed after Fe nws storage in the air for several months. Characterization of the as-grown product shows the formation of the crystalline {alpha}-Fe nws array with a preferred [1 1 0] nw growth direction. The aging of samples leads to the corrosion of Fe nws mainly from the template top side while aging of Fe nws liberated from the template and kept for several months under ambient conditions results in the corrosion of nws along their full length producing catkin-twig shapes.

  17. Template-directed biopolymerization: tape-copying Turing machines

    CERN Document Server

    Sharma, Ajeet K; 10.1142/S1793048012300083

    2013-01-01

    DNA, RNA and proteins are among the most important macromolecules in a living cell. These molecules are polymerized by molecular machines. These natural nano-machines polymerize such macromolecules, adding one monomer at a time, using another linear polymer as the corresponding template. The machine utilizes input chemical energy to move along the template which also serves as a track for the movements of the machine. In the Alan Turing year 2012, it is worth pointing out that these machines are "tape-copying Turing machines". We review the operational mechanisms of the polymerizer machines and their collective behavior from the perspective of statistical physics, emphasizing their common features in spite of the crucial differences in their biological functions. We also draw attention of the physics community to another class of modular machines that carry out a different type of template-directed polymerization. We hope this review will inspire new kinetic models for these modular machines.

  18. Competitive SWIFT cluster templates enhance detection of aging changes

    Science.gov (United States)

    Rebhahn, Jonathan A.; Roumanes, David R.; Qi, Yilin; Khan, Atif; Thakar, Juilee; Rosenberg, Alex; Lee, F. Eun‐Hyung; Quataert, Sally A.; Sharma, Gaurav

    2015-01-01

    Abstract Clustering‐based algorithms for automated analysis of flow cytometry datasets have achieved more efficient and objective analysis than manual processing. Clustering organizes flow cytometry data into subpopulations with substantially homogenous characteristics but does not directly address the important problem of identifying the salient differences in subpopulations between subjects and groups. Here, we address this problem by augmenting SWIFT—a mixture model based clustering algorithm reported previously. First, we show that SWIFT clustering using a “template” mixture model, in which all subpopulations are represented, identifies small differences in cell numbers per subpopulation between samples. Second, we demonstrate that resolution of inter‐sample differences is increased by “competition” wherein a joint model is formed by combining the mixture model templates obtained from different groups. In the joint model, clusters from individual groups compete for the assignment of cells, sharpening differences between samples, particularly differences representing subpopulation shifts that are masked under clustering with a single template model. The benefit of competition was demonstrated first with a semisynthetic dataset obtained by deliberately shifting a known subpopulation within an actual flow cytometry sample. Single templates correctly identified changes in the number of cells in the subpopulation, but only the competition method detected small changes in median fluorescence. In further validation studies, competition identified a larger number of significantly altered subpopulations between young and elderly subjects. This enrichment was specific, because competition between templates from consensus male and female samples did not improve the detection of age‐related differences. Several changes between the young and elderly identified by SWIFT template competition were consistent with known alterations in the elderly, and additional

  19. Modelling Template for the Development of the Process Flowsheet

    DEFF Research Database (Denmark)

    Fedorova, Marina; Gani, Rafiqul

    2015-01-01

    in connection to other modelling tools within the modelling framework are forming a user-friendly system, which will make the model development process easier and faster and provide the way for unified and consistent model documentation. The modeller can use the template for their specific problem or to extend...... parts in the modelling framework is highlighted through a development of a simple flowsheet model. Initially the model equations are obtained from the tool for model generation and then transferred to model analysis tool. Further, based on this model, a modelling template is created, which is used later...

  20. DNA-Templated Introduction of an Aldehyde Handle in Proteins

    DEFF Research Database (Denmark)

    Kodal, Anne Louise Bank; Rosen, Christian Bech; Mortensen, Michael Rosholm;

    2016-01-01

    -templated reductive amination we create DNA-protein conjugates with control over labeling stoichiometry without genetic engineering. A guiding DNA strand with a metal-binding functionality facilitates site-selectivity by directing coupling of a second reactive DNA strand to the vicinity of a protein metal......-binding site. Here, we demonstrate DNA-templated reductive amination for His6-tagged proteins and native metal-binding proteins, including IgG1 antibodies. We also use a cleavable linker between the DNA and the protein to remove the DNA and introduce a single aldehyde to proteins. This functions as a handle...

  1. Coordinated organogel templated fabrication of silver/polypyrrole composite nanowires

    Institute of Scientific and Technical Information of China (English)

    Bo Tian Li; Li Ming Tang; Kai Chen; Yu Xia; Xin Jin

    2011-01-01

    A new method to fabricate metal/conducting polymer composite nanowires is presented by taking silver/polypyrrole composite nanowires as an example.A silver (Ⅰ)-coordinated organogel as template was prepared firstly,and redox-polymerization of pyrrole took place on the gel fiber,giving product of silver/polypyrrole nanowires.The silver/polypyrrole nanowires were characterized by multiple techniques.This strategy could be carried out in one-step procedure at room temperature,and it proves the utility of coordinated organogels in template synthesis of polymer nanostructures.

  2. Inkjet print microchannels based on a liquid template.

    Science.gov (United States)

    Guo, Yuzhen; Li, Lihong; Li, Fengyu; Zhou, Haihua; Song, Yanlin

    2015-04-07

    A simple method to fabricate microchannels is demonstrated based on an inkjet printing liquid template. The morphology of the liquid template can be well controlled by using ink with viscosity sensitive to temperature. The as-prepared Y-shape microchannel is used as a microfluidic reactor for an acylation fluorigenic reaction in a matrix of polydimethylsiloxane (PDMS). Arbitrary modification of the microchannels could be easily realized synchronously with the formation of the microchannels. By grafting polyethylene glycol (PEG) onto the internal surface, an anti-biosorption microchannel is obtained. The facile method will be significant for the fabrication of a microfluidic chip with functional modifications.

  3. Automating embedded analysis capabilities using template-based generic programming

    CERN Document Server

    Pawlowski, Roger P; Salinger, Andrew G

    2012-01-01

    An approach for incorporating embedded simulation and analysis capabilities in complex simulation codes through template-based generic programming is presented. This approach relies on templating and operator overloading within the C++ language to transform a given calculation into one that can compute a variety of additional quantities that are necessary for many state-of-the-art simulation and analysis algorithms. An approach for incorporating these ideas into complex simulation codes through general graph-based assembly is also presented. These ideas have been implemented within a set of packages in the Trilinos framework and are demonstrated on a simple problem from chemical engineering.

  4. Solvothermal removal of the organic template from L{sub 3} ('sponge') templated silica monoliths

    Energy Technology Data Exchange (ETDEWEB)

    Dabbs, Daniel M. [Princeton University, Department of Chemical Engineering (United States); Mulders, Norbert [University of Delaware, Department of Physics and Astronomy (United States); Aksay, Ilhan A. [Princeton University, Department of Chemical Engineering (United States)], E-mail: iaksay@princeton.EDU

    2006-10-15

    We compare the methods of continuous solvent (Soxhlet) and supercritical solvent extractions for the removal of the organic template from nanostructured silica monoliths. Our monoliths are formed by templating the L{sub 3} liquid crystal phase of cetylpyridinium chloride in aqueous solutions with tetramethoxy silane. The monoliths that result from both Soxhlet and supercritical extraction methods are mechanically robust, optically clear, and free of cracks. The Soxhlet method compares favorably with supercritical solvent extraction in that equivalent L{sub 3}-templated silica can be synthesized without the use of specialized reactor hardware or higher temperatures and high pressures, while avoiding noxious byproducts. The comparative effectiveness of various solvents in the Soxhlet process is related to the Hildebrand solubility parameter, determined by the effective surface area of the extracted silica.

  5. Investigation of Terminology Coverage in Radiology Reporting Templates and Free‐text Reports

    Directory of Open Access Journals (Sweden)

    Yi Hong

    2015-06-01

    Full Text Available The Radiological Society of North America (RSNA is improving reporting practices by developing an online library of clear and consistent report templates. To compare term occurrences in free‐text radiology reports and RSNA reporting templates, the Wilcoxon signed‐rank test method was applied to investigate how much of the content of conventional narrative reports is covered by the terms included in the RSNA reporting templates. The results show that the RSNA reporting templates cover most terms that appear in actual radiology reports. The Wilcoxon test may be helpful in evaluatingexisting templates and guiding the enhancement of reporting templates.

  6. Detection of cancerous masses in mammograms by template matching: optimization of template brightness distribution by means of evolutionary algorithm.

    Science.gov (United States)

    Bator, Marcin; Nieniewski, Mariusz

    2012-02-01

    Optimization of brightness distribution in the template used for detection of cancerous masses in mammograms by means of correlation coefficient is presented. This optimization is performed by the evolutionary algorithm using an auxiliary mass classifier. Brightness along the radius of the circularly symmetric template is coded indirectly by its second derivative. The fitness function is defined as the area under curve (AUC) of the receiver operating characteristic (ROC) for the mass classifier. The ROC and AUC are obtained for a teaching set of regions of interest (ROIs), for which it is known whether a ROI is true-positive (TP) or false-positive (F). The teaching set is obtained by running the mass detector using a template with a predetermined brightness. Subsequently, the evolutionary algorithm optimizes the template by classifying masses in the teaching set. The optimal template (OT) can be used for detection of masses in mammograms with unknown ROIs. The approach was tested on the training and testing sets of the Digital Database for Screening Mammography (DDSM). The free-response receiver operating characteristic (FROC) obtained with the new mass detector seems superior to the FROC for the hemispherical template (HT). Exemplary results are the following: in the case of the training set in the DDSM, the true-positive fraction (TPF) = 0.82 for the OT and 0.79 for the HT; in the case of the testing set, TPF = 0.79 for the OT and 0.72 for the HT. These values were obtained for disease cases, and the false-positive per image (FPI) = 2.

  7. Metal films with imprinted nanostructures by template stripping

    DEFF Research Database (Denmark)

    Eriksen, René Lynge; Pors, Anders; Dreier, Jes

    We present a novel template stripping procedure for fabricating metal films with imprinted nanostructures. The basic idea is to deposit a gold film onto a nano-structured substrate and subsequently strip the film from the substrate surface thereby revealing imprinted nanostructures in the film...... result is a thin gold film with imprinted nano-cavities....

  8. Exploring Many-Core Design Templates for FPGAs and ASICs

    Directory of Open Access Journals (Sweden)

    Ilia Lebedev

    2012-01-01

    Full Text Available We present a highly productive approach to hardware design based on a many-core microarchitectural template used to implement compute-bound applications expressed in a high-level data-parallel language such as OpenCL. The template is customized on a per-application basis via a range of high-level parameters such as the interconnect topology or processing element architecture. The key benefits of this approach are that it (i allows programmers to express parallelism through an API defined in a high-level programming language, (ii supports coarse-grained multithreading and fine-grained threading while permitting bit-level resource control, and (iii reduces the effort required to repurpose the system for different algorithms or different applications. We compare template-driven design to both full-custom and programmable approaches by studying implementations of a compute-bound data-parallel Bayesian graph inference algorithm across several candidate platforms. Specifically, we examine a range of template-based implementations on both FPGA and ASIC platforms and compare each against full custom designs. Throughout this study, we use a general-purpose graphics processing unit (GPGPU implementation as a performance and area baseline. We show that our approach, similar in productivity to programmable approaches such as GPGPU applications, yields implementations with performance approaching that of full-custom designs on both FPGA and ASIC platforms.

  9. an excel template for processing examination results for higher ...

    African Journals Online (AJOL)

    Department of Mathematical Sciences, Faculty of Science, Kaduna State University, Kaduna, Nigeria. ... We adopted the Nigerian Universities Commission's grading systems ... the MS Excel “OR” function is a basic logical function that is ..... The major components of the templates, which are (a) grading of the student's score; ...

  10. Template Authoring Environment for the Automatic Generation of Narrative Content

    Science.gov (United States)

    Caropreso, Maria Fernanda; Inkpen, Diana; Keshtkar, Fazel; Khan, Shahzad

    2012-01-01

    Natural Language Generation (NLG) systems can make data accessible in an easily digestible textual form; but using such systems requires sophisticated linguistic and sometimes even programming knowledge. We have designed and implemented an environment for creating and modifying NLG templates that requires no programming knowledge, and can operate…

  11. Computer-aided modelling template: Concept and application

    DEFF Research Database (Denmark)

    Fedorova, Marina; Sin, Gürkan; Gani, Rafiqul

    2015-01-01

    decomposition technique which identifies generic steps and workflow involved, the computer-aided template concept has been developed. This concept is implemented as a software tool, which provides a user-friendly interface for following the workflow steps and guidance through the steps providing additional...

  12. Higher Accuracy Template for Corner Cube Reflected Image

    Energy Technology Data Exchange (ETDEWEB)

    Awwal, A S; Rice, K L; Leach, R R; Taha, T M

    2008-07-11

    Video images of laser beams are analyzed to determine the position of the laser beams for alignment purpose in the National Ignition Facility (NIF). Algorithms process beam images to facilitate automated laser alignment. One such beam image, known as the corner cube reflected pinhole image, exhibits wide beam quality variations that are processed by a matched-filter-based algorithm. The challenge is to design a representative template that captures these variations while at the same time assuring accurate position determination. This paper describes the development of a new analytical template to accurately estimate the center of a beam with good image quality. The templates are constructed to exploit several key recurring features observed in the beam images. When the beam image quality is low, the algorithm chooses a template that contains fewer features. The algorithm was implemented using a Xilinx Virtex II Pro FPGA implementation that provides a speedup of about 6.4 times over a baseline 3GHz Pentium 4 processor.

  13. Utility Templates for the Interpretation of Conditional Statements

    Science.gov (United States)

    Bonnefon, Jean-Francois; Haigh, Matthew; Stewart, Andrew J.

    2013-01-01

    People often use conditional statements to describe configurations of agents, actions and valued consequences. In this paper we propose the existence of utility templates, a special subset of these configurations that exert strong constraints on how people interpret conditionals. We conducted an initial completion survey which identified four…

  14. Magnetic and conductive magnetite nanowires by DNA-templating.

    Science.gov (United States)

    Mohamed, Hasan Daw A; Watson, Scott M D; Horrocks, Benjamin R; Houlton, Andrew

    2012-09-28

    The synthesis of nanowires made of magnetite (Fe(3)O(4)) phase iron oxide was achieved using DNA as a template to direct formation of the metal oxide and confine its growth in two dimensions. This simple solution-based approach involves initial association of Fe(2+) and Fe(3+) to the DNA "template" molecules, and subsequent co-precipitation of the Fe(3)O(4) material, upon increasing the solution pH, to give the final metal oxide nanowires. Analysis of the DNA-templated material, using a combination of FTIR, XRD, XPS, and Raman spectroscopy, confirmed the iron oxide formed to be the Fe(3)O(4) crystal phase. Investigation of the structural character of the nanowires, carried out by AFM, revealed the metal oxide to form regular coatings of nanometre-scale thickness around the DNA templates. Statistical analysis showed the size distribution of the nanowires to follow a trimodal model, with the modal diameter values identified as 5-6 nm, 14-15 nm, and 23-24 nm. Additional scanning probe microscopy techniques (SCM, MFM) were also used to verify that the nanowire structures are electrically conducting and exhibit magnetic behaviour. Such properties, coupled with the small dimensions of these materials, make them potentially good candidates for application in a host of future nanoscale device technologies.

  15. Fabrication of Nanostructures Using Self-Assembled Peptides as Templates

    DEFF Research Database (Denmark)

    Castillo, Jaime

    2015-01-01

    This chapter evaluates the use of a short-aromatic dipeptide, diphenylalanine, as a template in the fabrication of new nanostructures (nanowires, coaxial nanocables, nanochannels) using materials such as silicon, conducting and non-conducting polymers. Diphenylalanine self-organize into nanostruc...

  16. Template Transfer Nanoimprint for Uniform Nanopores and Nanopoles

    Directory of Open Access Journals (Sweden)

    Jianjun Li

    2016-01-01

    Full Text Available A new methodology is developed for the fabrication of nanostructures on substrate based on anodized Al2O3 (AAO porous template transfer process. It includes (1 forming amorphous alloy, negative UV-resist resin (i.e., SU-8, or PMMA (polymethylmethacrylate plate nanorod arrays by hot-press molding amorphous alloy, negative UV-resist resin (i.e., SU-8, or PMMA plate into the anodized Al2O3 porous substrates; (2 removing AAO templates by chemical etching process after suitable posttreatment (annealing and/or irradiation to improve the mechanical strength of the nanorod arrays; (3 reforming nanopore films by hot-embossing the nanorod arrays into a thin layer of polymer film on substrates (e.g., silica; (4 cleaning the bottom residues in pores of the films by oxygen plasmon. The results indicate that the diameters of amorphous alloy (or negative UV-resist resin or PMMA nanorod arrays can be ranged from 32 nm to 200 nm. The diameters of the imprinted ILR-1050 photoresist nanopores are about 94.5 ± 12.2 nm and the diameters of the imprinted or SU-8 resin on glass slides nanopores are about 207 ± 26.4 nm, which inherit the diameters of AAO templates. This methodology provides a general method to fabricate nanorods arrays and/or thin nanopore films by template transfer nanoimprint process.

  17. Nanomolar determination of Pb (II ions by selective templated electrode

    Directory of Open Access Journals (Sweden)

    Mazloum-Ardakani Mohammad

    2012-01-01

    Full Text Available Polypyrrole modified electrode, prepared by electropolymerization of pyrrole in the presence of methyl red as a dopant, was templated with respect to Pb2+ ion and applied for potentiometric and voltammetric detection of this ion. The templating process improved the analytical response characteristics of the electrode, specially their selectivity, with respect to Pb2+ ion. The improvement depends on both the incorporated ligand (dopant and the templating process, with the latter being more vital. The potentiometric response of the electrode was linear within the Pb2+ concentration range of 2.0×10-6 to 5.0×10-2 M with a near-Nernstian slope of 28.6 mV decade-1 and a detection limit of 7.0 ×10-7 M. The electrode was also used for preconcentration differential pulse anodic stripping voltammetry (DPASV and results showed that peak currents for the incorporated lead species were dependent on the metal ion concentration in the range of 1.0×10-8 to 1.0×10-3 M. The detection limit of DPASV method was 3.5 ×10-9 M. The selectivity of the electrode with respect to some transition metal ions was investigated. The modified-templated electrode was used for the successful assay of lead in two standard reference material samples.

  18. Black silicon maskless templates for carbon nanotube forests

    DEFF Research Database (Denmark)

    Wierzbicki, Rafal; Schmidt, Michael Stenbæk; Boisen, Anja

    2013-01-01

    We present here a proof of concept for a novel fabrication method of vertically aligned carbon nanotube forests, utilizing black silicon nanograss (a forest of silicon nanometer-sized spikes created with reactive ion etching) coated with titanium tungsten diffusion barrier as a template. The meth...

  19. Detection of GW bursts with chirplet-like template families

    Energy Technology Data Exchange (ETDEWEB)

    Chassande Mottin, Eric; Miele, Miriam [CNRS and Univ. Paris Denis Diderot, AstroParticule et Cosmologie (France); Mohapatra, Satya; Cadonati, Laura, E-mail: ecm@apc.univ-paris7.f [Physics Department, University of Massachusetts, Amherst MA 01003 (United States)

    2010-10-07

    Gravitational wave (GW) burst detection algorithms typically rely on the hypothesis that the burst signal is 'locally stationary', that is with slow variations of its frequency. Under this assumption, the signal can be decomposed into a small number of wavelets with constant frequency. This justifies the use of a family of sine-Gaussian wavelets in the Omega pipeline, one of the algorithms used in LIGO-Virgo burst searches. However, there are plausible scenarios where the burst frequency evolves rapidly, such as in the merger phase of a binary black-hole and/or neutron-star coalescence. In those cases, the local stationarity of sine Gaussians induces performance losses, due to the mismatch between the template and the actual signal. We propose an extension of the Omega pipeline based on chirplet-like templates. Chirplets incorporate an additional parameter, the chirp rate, to control the frequency variation. In this paper, we show that the Omega pipeline can easily be extended to include a chirplet template bank. We illustrate the method on a simulated data set, with a family of phenomenological binary black-hole coalescence waveforms embedded into Gaussian LIGO/Virgo-like noise. Chirplet-like templates result in an enhancement of the measured signal-to-noise ratio.

  20. Hiding correlation-based Watermark templates using secret modulation

    NARCIS (Netherlands)

    Lichtenauer, J.; Setyawan, I.; Lagendijk, R.

    2004-01-01

    A possible solution to the difficult problem of geometrical distortion of watermarked images in a blind watermarking scenario is to use a template grid in the autocorrelation function. However, the important drawback of this method is that the watermark itself can be estimated and subtracted, or the

  1. Abbreviated Pandemic Influenza Planning Template for Primary Care Offices

    Energy Technology Data Exchange (ETDEWEB)

    HCTT CHE

    2010-01-01

    The Abbreviated Pandemic Influenza Plan Template for Primary Care Provider Offices is intended to assist primary care providers and office managers with preparing their offices for quickly putting a plan in place to handle an increase in patient calls and visits, whether during the 2009-2010 influenza season or future influenza seasons.

  2. New NIR light-curve templates for classical Cepheids

    CERN Document Server

    Inno, L; Romaniello, M; Bono, G; Monson, A; Ferraro, I; Iannicola, G; Persson, E; Buonanno, R; Freedman, W; Gieren, W; Groenewegen, M A T; Ita, Y; Laney, C D; Lemasle, B; Madore, B F; Nagayama, T; Nakada, Y; Nonino, M; Pietrzynski, G; Primas, F; Scowcroft, V; Soszynski, I; Tanabe, T; Udalski, A

    2014-01-01

    We present new near-infrared (NIR) light-curve templates for fundamental (FU, JHK) and first overtone (FO, J) Cepheids. The new templates together with PL and PW relations provide Cepheid distances from single-epoch observations with a precision only limited by the intrinsic accuracy of the method adopted. The templates rely on a very large set of Galactic and Magellanic Clouds (MCs) Cepheids (FU,~600; FO,~200) with well sampled NIR (IRSF data) and optical (V,I; OGLE data) light curves. To properly trace the change in the shape of the light curve as a function of period, we split the sample of calibrating Cepheids into 10 different period bins. The templates for the first time cover FO Cepheids and the FU short-period Cepheids (P<5 days). Moreover, the zero-point phase is anchored to the phase of the mean magnitude along the rising branch. The new approach has several advantages in sampling the light curve of bump Cepheids when compared with the phase of maximum light. We also provide new estimates of the ...

  3. People counting with stereo cameras: two template-based solutions

    NARCIS (Netherlands)

    van Oosterhout, T.; Kröse, B.; Englebienne, G.; Csurka, G.; Braz, J.

    2012-01-01

    People counting is a challenging task with many applications. We propose a method with a fixed stereo camera that is based on projecting a template onto the depth image. The method was tested on a challenging outdoor dataset with good results and runs in real time.

  4. A visual template-matching method for articulation angle measurement

    CSIR Research Space (South Africa)

    De Saxe, C

    2015-09-01

    Full Text Available and proposed sensing methods are limited either in terms of commercial feasibility or measurement accuracy. This paper investigates a vision-based system consisting of a single tractor-mounted camera, a template-matching image processing algorithm...

  5. General Template for the FMEA Applications in Primary Food Processing.

    Science.gov (United States)

    Özilgen, Sibel; Özilgen, Mustafa

    2016-11-22

    Data on the hazards involved in the primary steps of processing cereals, fruit and vegetables, milk and milk products, meat and meat products, and fats and oils are compiled with a wide-ranging literature survey. After determining the common factors from these data, a general FMEA template is offered, and its use is explained with a case study on pasteurized milk production.

  6. Developing Gold Nanowires by Galvanic Replication of Ion Track Templates

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ Scientists at the CAS Institute of Modern Physics (IMP) in Lanzhou, capital of northwest China's Gansu Province, recently made an essential advance in production and investigation of single- and polycrystalline gold nanowires by galvanic replication of ion track templates. Their work was published by the Nanotechnology (Vol. 17, 1922-1926, 2006).

  7. 16 CFR Figure 9 to Part 1610 - Brushing Device Template

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Brushing Device Template 9 Figure 9 to Part 1610 Commercial Practices CONSUMER PRODUCT SAFETY COMMISSION FLAMMABLE FABRICS ACT REGULATIONS STANDARD FOR THE FLAMMABILITY OF CLOTHING TEXTILES Pt.1610, Fig. 9 Figure 9 to Part 1610—Brushing...

  8. Fluids as Dynamic Templates for Cytoskeletal Proteins in Plant Cells

    CERN Document Server

    Lofthouse, J T

    2008-01-01

    The Dynamic Template model of biological cell membranes and the cytoplasm as spatially organised fluid layers is extended to plant cells, and is shown to offer a feasible shear driven mechanism for the co-alignment of internal and external fibres observed during growth and tropic responses

  9. Template synthesis and characterization of chiral organic nanotubes and nanowires

    Science.gov (United States)

    Gan, Haiyang; Liu, Huibiao; Li, Yuliang; Liu, Yang; Lu, Fushen; Jiu, Tonggang; Zhu, Daoben

    2004-11-01

    Large-scale chiral quinidine nanotubes and nanowires have been obtained by pressure-filter and wetting procedure using porous aluminum oxide template. The circular dichroism (CD) spectra show quinidine nanotubes and nanowires remain the optical properties of chirality in the aggregations. Compared with that of the quinidine solution, the CD spectra of quinidine nanotubes and nanowires show obvious red shift.

  10. Efficient multi-site-directed mutagenesis directly from genomic template

    Indian Academy of Sciences (India)

    Fengtao Luo; Xiaolan Du; Tujun Weng; Xuan Wen; Junlan Huang; Lin Chen

    2012-12-01

    In this article, the traditional multi-site-directed mutagenesis method based on overlap extension PCR was improved specifically for complicated templates, such as genomic sequence or complementary DNA. This method was effectively applied for multi-site-directed mutagenesis directly from mouse genomic DNA, as well as for combination, deletion or insertion of DNA fragments.

  11. Ultrafast coherence transfer in DNA-templated silver nanoclusters

    DEFF Research Database (Denmark)

    Thyrhaug, Erling; Bogh, Sidsel Ammitzbøll; Carro, Miguel

    2017-01-01

    DNA-templated silver nanoclusters of a few tens of atoms or less have come into prominence over the last several years due to very strong absorption and efficient emission. Applications in microscopy and sensing have already been realized, however little is known about the excited-state structure...

  12. Synthesis of zeolite-templated carbons for hydrogen storage applications

    CSIR Research Space (South Africa)

    Musyoka, Nicholas M

    2013-10-01

    Full Text Available Hydrogen storage has been a key bottle-neck in the actualization of hydrogen as an energy carrier. The new field of hydrogen storage in templated carbonaceous materials has excited many researchers and considerable effort is being directed...

  13. Enzyme Activity and Biomolecule Templating at Liquid and Solid Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Harvey W. Blanch

    2004-12-01

    There are two main components of this research program. The first involves studies of the adsorption and catalytic activity of proteins at fluid-fluid and fluid-solid interfaces; the second employs biological macromolecules as templates at the solid-liquid interface for controlled crystallization of inorganic materials, to provide materials with specific functionality.

  14. Learning AND-OR templates for object recognition and detection.

    Science.gov (United States)

    Si, Zhangzhang; Zhu, Song-Chun

    2013-09-01

    This paper presents a framework for unsupervised learning of a hierarchical reconfigurable image template--the AND-OR Template (AOT) for visual objects. The AOT includes: 1) hierarchical composition as "AND" nodes, 2) deformation and articulation of parts as geometric "OR" nodes, and 3) multiple ways of composition as structural "OR" nodes. The terminal nodes are hybrid image templates (HIT) [17] that are fully generative to the pixels. We show that both the structures and parameters of the AOT model can be learned in an unsupervised way from images using an information projection principle. The learning algorithm consists of two steps: 1) a recursive block pursuit procedure to learn the hierarchical dictionary of primitives, parts, and objects, and 2) a graph compression procedure to minimize model structure for better generalizability. We investigate the factors that influence how well the learning algorithm can identify the underlying AOT. And we propose a number of ways to evaluate the performance of the learned AOTs through both synthesized examples and real-world images. Our model advances the state of the art for object detection by improving the accuracy of template matching.

  15. Raamovereenkomst digitale archiveringsdienst : Template Digital Archiving Services Agreement

    NARCIS (Netherlands)

    2016-01-01

    textabstractThis template for a Digital Archiving Services Agreement between NISV and non broadcast data producers (i.c. dataproducers from outside of the public broadcast environment ) contains all arrangements and services to be mutually agreed on, as to the data formats and metadata items to be i

  16. Public Notification - Revised Total Coliform Rule Failure To Report Template

    Science.gov (United States)

    When a PWS fails to report their monitoring results for Total Coliform bacteria, it must issue a public notice to inform consumers of its water of that failure to report. This template can be used as a guide for preparing that public notice.

  17. PEOPLE COUNTING WITH STEREO CAMERAS: Two Template-based Solutions

    NARCIS (Netherlands)

    Van Oosterhout, Tim; Kröse, Ben; Englebienne, Gwenn

    2012-01-01

    People counting is a challenging task with many applications. We propose a method with a fixed stereo camera that is based on projecting a template onto the depth image. The method was tested on a challenging outdoor dataset with good results and runs in real time.

  18. Open Access Policy Guidelines and Template for Funders

    OpenAIRE

    Tsoukala, Victoria; Angelaki, Marina

    2015-01-01

    The present guidelines aim to assist in the development of efficient Open Access policies among Funders.  They provide the context, the process and a model policy (template) that will enable Funders to develop and implement their own Open Access policy. 

  19. PREPARATION AND CHARACTERIZATION OF IRON OXIDE NANOPARTICLES ON DISACCHARIDE TEMPLATES

    Directory of Open Access Journals (Sweden)

    B ANILREDDY

    2013-09-01

    Full Text Available We report here the preparation of nanoparticles of iron oxide in the presence of polysaccharidetemplates. Interaction between iron sulfate and template has been carried out in aqueous phase,followed by the selective and controlled removal of the template to achieve narrow distribution ofparticle size. Particles of iron oxide obtained have been characterized for their stability in solventmedia, size, size distribution and crystallinity and it was found that when the negative value of thezeta potential increases, particle size decreases. A narrow particle size distribution with D100 = 275nm was obtained with chitosan and starch templates. SEM measurements further confirm the particlesize measurement. Diffuse reflectance UV–VIS spectra values show that the template is completelyremoved from the final iron oxide particles and powder XRD measurements show that the peaks ofthe diffractogram are in agreement with the theoretical data of hematite. The salient observations ofour study shows that there occurs a direct correlation between zeta potential, polydispersity index,band gap energy and particle size. The crystallite size of the particles was found to be 30–35 nm. Alarge negative zeta potential was found to be advantageous for achieving lower particle sizes, as theparticles remained discrete without agglomeration.

  20. Julius – a template based supplementary electronic health record system

    Directory of Open Access Journals (Sweden)

    Klein Gunnar O

    2007-05-01

    Full Text Available Abstract Background EHR systems are widely used in hospitals and primary care centres but it is usually difficult to share information and to collect patient data for clinical research. This is partly due to the different proprietary information models and inconsistent data quality. Our objective was to provide a more flexible solution enabling the clinicians to define which data to be recorded and shared for both routine documentation and clinical studies. The data should be possible to reuse through a common set of variable definitions providing a consistent nomenclature and validation of data. Another objective was that the templates used for the data entry and presentation should be possible to use in combination with the existing EHR systems. Methods We have designed and developed a template based system (called Julius that was integrated with existing EHR systems. The system is driven by the medical domain knowledge defined by clinicians in the form of templates and variable definitions stored in a common data repository. The system architecture consists of three layers. The presentation layer is purely web-based, which facilitates integration with existing EHR products. The domain layer consists of the template design system, a variable/clinical concept definition system, the transformation and validation logic all implemented in Java. The data source layer utilizes an object relational mapping tool and a relational database. Results The Julius system has been implemented, tested and deployed to three health care units in Stockholm, Sweden. The initial responses from the pilot users were positive. The template system facilitates patient data collection in many ways. The experience of using the template system suggests that enabling the clinicians to be in control of the system, is a good way to add supplementary functionality to the present EHR systems. Conclusion The approach of the template system in combination with various local EHR

  1. A new route of synthesizing perovskite nanotubes by templating approach

    Science.gov (United States)

    Habiballah, Anisah Shafiqah; Osman, Nafisah; Jani, Abdul Mutalib Md

    2017-09-01

    A perovskite oxide for example Ba0.5Sr0.5Co0.8Fe0.2O3-δ (BSCF) has attracted growing attention due to its high catalytic activity and mixed ionic/electronic conductivity. Recent research of BSCF is more comprehensively based on a remarkable trajectory of innovation, in particular with regards to the synthesis of perovskite structures in one-dimensional (1-D) nanometric scales as they promote not only to increase an active electrode area for the oxygen reduction reaction, but also allow the tailoring of electrode's architecture. Nevertheless, achieving the desired 1-D structure by a conventional method such as hydrothermal, solvothermal, or sonochemical are far from satisfactory. Herein, the aim of this work is to synthesize the BSCF perovskite nanotubes via soft templating approach, particularly using anodic aluminium oxide (AAO) as a template, focusing on the morphology, composition and structural properties were demonstrated. After the AAO template was anodized at 80 V, the fabricated template was clamped between apair of spectroscopic cells containing BSCF sol and deionized water (with a hole of both sides) for 24 hours. After that, the sample was removed from the cells followed by heat treatment process. The FESEM images showed that BSCF nanotubes were successfully achieved, with the diameter of the nanotubes' approximately 80 nm. The EDX result also confirmed the nominal stoichiometry of Ba0.5Sr0.5Co0.8Fe0.2O3-δ. Meanwhile, the XRD pattern confirmed a single crystalline phase of BSCF nanotubes was successfully obtained and congruent to a cubic perovskite structure of BSCF. Possible formation mechanism,as well as the schematic illustration of BSCF nanotubes inside the template was also discussed in this paper.

  2. Synthesis of porous carbon balls from spherical colloidal crystal templates.

    Science.gov (United States)

    Kim, Youngchan; Cho, Chang-Yeol; Kang, Ji-Hwan; Cho, Young-Sang; Moon, Jun Hyuk

    2012-07-17

    Spherical inverse opal (IO) porous carbon was produced utilizing silica colloidal crystal spheres as templates. The spherical colloidal crystals were obtained through the self-assembly of monodisperse particles inside an emulsion droplet with confined geometry. The templates were inverted using a carbon precursor, phenol-formaldehyde (PF) resol. We demonstrated a two-step synthesis involving the subsequent infiltration of the PF resol precursor into the spherical colloidal crystal template and a one-step synthesis using a silica colloidal solution containing dissolved PF resol. In the former case, the sizes of the IO carbon balls were controlled by the size of the colloidal crystal templates, and diameters of a few micrometers up to 50 μm were obtained. The average diameter of the macropores created by the silica particles was 230 nm. Moreover, meso-/macroporous IO carbon balls were created using block-copolymer templates in the PF resol. In the one-step synthesis, the concentration of PF resol in the colloidal solution controlled the diameter of the IO carbon balls. IO balls smaller than 3 μm were obtained from the direct addition of 5% PF resol. The one-step synthesis produced rather irregular porous structures reflecting the less ordered crystallization processes inside the spherical colloidal crystals. Nitrogen adsorption and cyclic voltammetry measurements were conducted to measure the specific area and electroactive surface area of the IO carbon balls. The specific area of the mesopores-incorporated IO carbon balls was 1.3 times higher than that of bare IO carbon balls. Accordingly, the meso-/macroporous porous carbon balls exhibited higher electrocatalytic properties than the macroporous carbon balls.

  3. BioAssay templates for the semantic web

    Directory of Open Access Journals (Sweden)

    Alex M. Clark

    2016-05-01

    Full Text Available Annotation of bioassay protocols using semantic web vocabulary is a way to make experiment descriptions machine-readable. Protocols are communicated using concise scientific English, which precludes most kinds of analysis by software algorithms. Given the availability of a sufficiently expressive ontology, some or all of the pertinent information can be captured by asserting a series of facts, expressed as semantic web triples (subject, predicate, object. With appropriate annotation, assays can be searched, clustered, tagged and evaluated in a multitude of ways, analogous to other segments of drug discovery informatics. The BioAssay Ontology (BAO has been previously designed for this express purpose, and provides a layered hierarchy of meaningful terms which can be linked to. Currently the biggest challenge is the issue of content creation: scientists cannot be expected to use the BAO effectively without having access to software tools that make it straightforward to use the vocabulary in a canonical way. We have sought to remove this barrier by: (1 defining a BioAssay Template (BAT data model; (2 creating a software tool for experts to create or modify templates to suit their needs; and (3 designing a common assay template (CAT to leverage the most value from the BAO terms. The CAT was carefully assembled by biologists in order to find a balance between the maximum amount of information captured vs. low degrees of freedom in order to keep the user experience as simple as possible. The data format that we use for describing templates and corresponding annotations is the native format of the semantic web (RDF triples, and we demonstrate some of the ways that generated content can be meaningfully queried using the SPARQL language. We have made all of these materials available as open source (http://github.com/cdd/bioassay-template, in order to encourage community input and use within diverse projects, including but not limited to our own

  4. Template Route to Chemically Engineering Cavities at Nanoscale: A Case Study of Zn(OH2 Template

    Directory of Open Access Journals (Sweden)

    Wu Junshu

    2010-01-01

    Full Text Available Abstract A size-controlled Zn(OH2 template is used as a case study to explain the chemical strategy that can be executed to chemically engineering various nanoscale cavities. Zn(OH2 octahedron with 8 vertices and 14 edges is fabricated via a low temperature solution route. The size can be tuned from 1 to 30 μm by changing the reaction conditions. Two methods can be selected for the hollow process without loss of the original shape of Zn(OH2 template. Ion-replacement reaction is suitable for fabrication of hollow sulfides based on the solubility difference between Zn(OH2 and products. Controlled chemical deposition is utilized to coat an oxide layer on the surface of Zn(OH2 template. The abundant hydroxyl groups on Zn(OH2 afford strong coordination ability with cations and help to the coating of a shell layer. The rudimental Zn(OH2 core is eliminated with ammonia solution. In addition, ZnO-based heterostructures possessing better chemical or physical properties can also be prepared via this unique templating process. Room-temperature photoluminescence spectra of the heterostructures and hollow structures are also shown to study their optical properties.

  5. TEMPLATE POLYMERIZATION OF N-VINYLIMIDAZOLE ALONG POLY(METHACRYLIC ACID) IN WATER .2. KINETICS OF THE TEMPLATE POLYMERIZATION

    NARCIS (Netherlands)

    VANDEGRAMPEL, HT; TAN, YY; CHALLA, G

    1991-01-01

    The template polymerization of N-vinylimidazole (VIm) along poly(methacrylic acid) (PMAA) in water at 50-degrees-C with 2,2'-azobis(2-amidinopropane).2HCl (AAP) as initiator was studied by using variable initiator and monomer concentrations at constant [PMAA]/[VIm]0. From the order in [VIm] it was c

  6. [Use of diagnostic templates at stages of prosthetics treatment with implant-retained restorations].

    Science.gov (United States)

    Gvetadze, R Sh; Abramian, S V; Ivanov, A A; Nubarian, A P

    2015-01-01

    The comparative analysis of efficiency of various types of diagnostic templates for planning orthopedic treatment of 50 patients with partial or complete absence of teeth was performed. The patients were divided in 3 groups according to template manufacturing technique. All diagnostic templates made in accordance with clinical conditions allowed transfering digital data of the scheduled prosthetic construction for virtual implantation planning. Advantages and pitfalls of each template type are discussed.

  7. Multi-template synthesis of hierarchically porous carbon spheres with potential application in supercapacitors

    NARCIS (Netherlands)

    Zhou, Weizheng; Lin, Zhixing; Tong, Gangsheng; Stoyanov, Simeon D.; Yan, Deyue; Mai, Yiyong; Zhu, Xinyuan

    2016-01-01

    A new and simple multi-template approach towards hierarchical porous carbon (HPC) materials was reported. HPC spheres were prepared by using hierarchical silica capsules (HSCs) as the hard template and triblock copolymer Pluronic P123 as the soft template. Three types of pores were tunably construct

  8. HL7 template model and EN/ISO 13606 archetype object model - a comparison.

    Science.gov (United States)

    Bointner, Karl; Duftschmid, Georg

    2009-01-01

    HL7 Templates and EN/ISO 13606 Archetypes are essential components for a semantically interoperable exchange of electronic health record (EHR) data. In this article the underlying models from which Templates and Archetypes are instantiated, namely the HL7 Template Model and the EN/ISO 13606 Archetype Object Model will be compared to identify discrepancies and analogies.

  9. Dosimetry study of three-dimensional print template-guided precision 125I seed implantation

    Directory of Open Access Journals (Sweden)

    Zhang Hongtao

    2016-01-01

    Conclusions: The postplan and preplan dose parameters of 3D print template-guided seed implantation were nearly consistent. The dose parameters of template group superior to the traditional group. The seeds can be implanted accurately with 3D print template.

  10. Template polymerization of N-vinylimidazole along poly(methacrylic acid) in water

    NARCIS (Netherlands)

    Grampel, Hendrik Theodorus van de

    1990-01-01

    Template polymerisaties zijn polymerisaties waarbij radicalen gedurende het grootste gedeelte van hun bestaan langs het template polymeer groeien. In het algemeen kan de template invloed hebben op de polymerisatiesnelheid, als ook op het molecuulgewicht en de tacticiteit van het bijgevormde polymeer

  11. Detecting lung cancer symptoms with analogic CNN algorithms based on a constrained diffusion template

    Energy Technology Data Exchange (ETDEWEB)

    Hirakawa, Satoshi; Nishio, Yoshifumi; Ushida, Akio; Ueno, Junji; Kasem, I.; Nishitani, Hiromu [Tokushima Univ. (Japan); Rekeczky, C.; Roska, T.

    1997-07-01

    In this article, a new type of diffusion template and an analogic CNN algorithm using this diffusion template for detecting some lung cancer symptoms in X-ray films are proposed. The performance of the diffusion template is investigated and our CNN algorithm is verified to detect some key lung cancer symptoms, successfully. (author)

  12. Template synthesized chitosan nano test tubes for drug delivery applications

    Science.gov (United States)

    Perry, Jillian L. Moulton

    There is tremendous current interest in developing nanoscale drug delivery vehicles. Though intensive efforts have focused on developing spherical drug delivery vehicles, cylindrically shaped vehicles such as nanotubes offer many advantages. Typically, nanotubes can carry a larger inner payload than nanoparticles of the same diameter. Also, we can prepare nanotubes in templates whose geometries can be controlled, in turn allowing precise control over the length and diameter of the tubes. In addition, template synthesized nanotubes can be differentially functionalized on the inner and outer surfaces. Furthermore, templates that are closed on one end can be used to fabricate nano test tubes (closed on one end). The geometry of these nano test tubes allows them to be easily filled with a payload, the open end sealed with a nanoparticle to protect the payload from leaking out, and then the exterior of the tube can be functionalized with a targeting moiety. In an effort to develop such a system, we explored the fabrication of chitosan nano test tubes. Defect-free, chitosan nano test tubes of uniform size were synthesized within the pores of a nanoporous alumina template membrane. While the nano test tubes remained within the template membrane, their inner cavities were filled with a model payload. The payload was then trapped inside the nano test tubes by sealing the open ends of the tubes with latex nanoparticle caps. For proof-of-principle studies, imine linkages were used to attach the caps to the nano test tubes. To create a self-disassembling system, disulfide chemistry was used to covalently cap the nano test tubes. Once removed from the template, the exterior of the nano test tubes were modified with a targeting moiety, allowing them to be targeted to pathological sites. We have also shown that the chitosan nano test tubes are biodegradable by two systems: enzymatic cleavage by lysozymes and disulfide cleavage of the crosslinker by reducing environments

  13. Chinese license plate character segmentation using multiscale template matching

    Science.gov (United States)

    Tian, Jiangmin; Wang, Guoyou; Liu, Jianguo; Xia, Yuanchun

    2016-09-01

    Character segmentation (CS) plays an important role in automatic license plate recognition and has been studied for decades. A method using multiscale template matching is proposed to settle the problem of CS for Chinese license plates. It is carried out on a binary image integrated from maximally stable extremal region detection and Otsu thresholding. Afterward, a uniform harrow-shaped template with variable length is designed, by virtue of which a three-dimensional matching space is constructed for searching of candidate segmentations. These segmentations are detected at matches with local minimum responses. Finally, the vertical boundaries of each single character are located for subsequent recognition. Experiments on a data set including 2349 license plate images of different quality levels show that the proposed method can achieve a higher accuracy at comparable time cost and is robust to images in poor conditions.

  14. Highly tailorable thiol-ene based emulsion-templated monoliths

    DEFF Research Database (Denmark)

    Lafleur, J. P.; Kutter, J. P.

    2014-01-01

    The attractive surface properties of thiol-ene polymers combined with their ease of processing make them ideal substrates in many bioanalytical applications. We report the synthesis of highly tailorable emulsion-templated porous polymers and beads in microfluidic devices based on off-stoichiometr......The attractive surface properties of thiol-ene polymers combined with their ease of processing make them ideal substrates in many bioanalytical applications. We report the synthesis of highly tailorable emulsion-templated porous polymers and beads in microfluidic devices based on off......-stoichiometry thiolene chemistry. The method allows monolith synthesis and anchoring inside thiol-ene microchannels in a single step. Variations in the monomer stoichiometric ratios and/or amount of porogen used allow for the creation of extremely varied polymer morphologies, from foam-like materials to dense networks...

  15. Biomimetic Templating of Porous Lamellar Silicas by Vesicular Surfactant Assemblies

    Science.gov (United States)

    Tanev, Peter T.; Pinnavaia, Thomas J.

    1996-03-01

    A biomimetic templating approach to the synthesis of lamellar silicas is demonstrated. The procedure is based on the hydrolysis and cross-linking of a neutral silicon alkoxide precursor in the interlayered regions of multilamellar vesicles formed from a neutral diamine bola-amphiphile. Unlike earlier surfactant-templating approaches, this method produces porous lamellar silicas (designated MSU-V) with vesicular particle morphology, exceptional thermal stability, a high degree of framework cross-linking, unusually high specific surface area and pore volume, and sorption properties that are typical of pillared lamellar materials. This approach circumvents the need for a separate pillaring step in building porosity into a lamellar host structure and offers new opportunities for the direct fabrication of adsorbents, catalysts, and nanoscale devices.

  16. Template synthesis of 3-D bimodal ordered porous silica

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A dual template synthesis combined with a modified bulk sol-gel process was used to prepare the three dimensional bimodal ordered porous silica, in which the macropore wall is mesoporous and both the pores are interconnected. The macropores were replicated from the template of the dried polystyrene colloidal crystal after being removed by calcination at high temperature, whislt the mesopores were achieved by burning off the surfactant in the gel. The ordered morphologies and interconnection of both the macropores and the mesopores were evidenced by the characterizations with SEM and TEM attached with electron diffraction. Nitrogen adsorption results also confirmed the interconnectivity, sizes and their distribution of the two sorts of pores. The effect of surfactant concentration and calcination conditions on mesopore size and its distribution was also investigated.

  17. Computer-aided modeling framework – a generic modeling template

    DEFF Research Database (Denmark)

    Fedorova, Marina; Sin, Gürkan; Gani, Rafiqul

    This work focuses on the development of a computer-aided modeling framework. The framework is a knowledge-based system that is built on a generic modeling language and structured on workflows for different modeling tasks. The overall objective is to support model developers and users to generate...... and test models systematically, efficiently and reliably. In this way, development of products and processes can be made faster, cheaper and more efficient. In this contribution, as part of the framework, a generic modeling template for the systematic derivation of problem specific models is presented....... The application of the modeling template is highlighted with a case study related to the modeling of a catalytic membrane reactor coupling dehydrogenation of ethylbenzene with hydrogenation of nitrobenzene...

  18. Tailoring the porosity of hierarchical zeolites by carbon-templating

    DEFF Research Database (Denmark)

    Zhu, Kake; Egeblad, Kresten; Christensen, Claus H.

    2008-01-01

    We report the synthesis and characterization of a series of hierarchical porous zeolite single crystal materials with a range of porosities made available by carbon-templating using differently-sized carbon particles as templates for the additional non-micropore porosity. The materials were...... prepared by adsorption of the required zeolite synthesis gel components onto various commercially available carbon black powders followed by crystallization of the zeolite crystals in the presence of the inert carbon matrix and subsequent removal of the carbon particles embedded in the zeolite crystals...... by combustion. It is shown that the additional porosity of the hierarchical zeolites can be tailored by encapsulation of the differently-sized carbon particles during crystallization....

  19. Statistical Hiding Fuzzy Commitment Scheme for Securing Biometric Templates

    Directory of Open Access Journals (Sweden)

    Alawi A. Al-Saggaf

    2013-04-01

    Full Text Available By considering the security flaws in cryptographic hash functions, any commitment scheme designed straight through hash function usage in general terms is insecure. In this paper, we develop a general fuzzy commitment scheme called an ordinary fuzzy commitment scheme (OFCS, in which many fuzzy commitment schemes with variety complexity assumptions is constructed. The scheme is provably statistical hiding (the advisory gets almost no statistically advantages about the secret message. The efficiency of our scheme offers different security assurance, and the trusted third party is not involved in the exchange of commitment.The characteristic of our scheme makes it useful for biometrics systems. If the biometrics template is compromised, then there is no way to use it directly again even in secure biometrics systems. This paper combines biometrics and OFCS to achieve biometric protection scheme using smart cards with renewability of protected biometrics template property.

  20. Medical Image Retrieval Based on Multi-Layer Resampling Template

    Institute of Scientific and Technical Information of China (English)

    WANG Xin-rui; YANG Yun-feng

    2014-01-01

    Medical image application in clinical diagnosis and treatment is becoming more and more widely, How to use a large number of images in the image management system and it is a very important issue how to assist doctors to analyze and diagnose. This paper studies the medical image retrieval based on multi-layer resampling template under the thought of the wavelet decomposition, the image retrieval method consists of two retrieval process which is coarse and fine retrieval. Coarse retrieval process is the medical image retrieval process based on the image contour features. Fine retrieval process is the medical image retrieval process based on multi-layer resampling template, a multi-layer sampling operator is employed to extract image resampling images each layer, then these resampling images are retrieved step by step to finish the process from coarse to fine retrieval.

  1. Supported lipid bilayers as templates to design manganese oxide nanoparticles

    Indian Academy of Sciences (India)

    J Maheshkumar; B Sreedhar; B U Nair; A Dhathathreyan

    2012-09-01

    This work reports on the preparation of nanoclusters of manganese oxide using biotemplating techniques. Supported lipid bilayers (SLBs) on quartz using cationic lipid [Dioctadecyldimethylammonium bromide (DOMA)] and mixed systems with neutral phospholipids dipalmitoyl phosphatidylcholine (DPPC) and dioleoyl phosphatidylcholine (DOPC) have been used as templates to synthesize these nanoparticles in a waterbased medium at room temperature. The Transmission electron microscopy (TEM) and Scanning electron microscopy (SEM) show manganese oxide nanostructures that are composed of crystals or small clusters in the size range of 20-50 nm in diameter. Small angle XRD showed that template removal through calcining process results in nanostructures of the manganese oxide in sizes from 30 to 50 nm. Using these organized assemblies it is possible to control the nano and mesoscopic morphologies of particles and both rod-like and spherical particles can be synthesized.

  2. Template based parallel checkpointing in a massively parallel computer system

    Science.gov (United States)

    Archer, Charles Jens; Inglett, Todd Alan

    2009-01-13

    A method and apparatus for a template based parallel checkpoint save for a massively parallel super computer system using a parallel variation of the rsync protocol, and network broadcast. In preferred embodiments, the checkpoint data for each node is compared to a template checkpoint file that resides in the storage and that was previously produced. Embodiments herein greatly decrease the amount of data that must be transmitted and stored for faster checkpointing and increased efficiency of the computer system. Embodiments are directed to a parallel computer system with nodes arranged in a cluster with a high speed interconnect that can perform broadcast communication. The checkpoint contains a set of actual small data blocks with their corresponding checksums from all nodes in the system. The data blocks may be compressed using conventional non-lossy data compression algorithms to further reduce the overall checkpoint size.

  3. Template aging in eye movement-driven biometrics

    Science.gov (United States)

    Komogortsev, Oleg V.; Holland, Corey D.; Karpov, Alex

    2014-05-01

    This paper presents a template aging study of eye movement biometrics, considering three distinct biometric techniques on multiple stimuli and eye tracking systems. Short-to-midterm aging effects are examined over two-weeks, on a highresolution eye tracking system, and seven-months, on a low-resolution eye tracking system. We find that, in all cases, aging effects are evident as early as two weeks after initial template collection, with an average 28% (±19%) increase in equal error rates and 34% (±12%) reduction in rank-1 identification rates. At seven months, we observe an average 18% (±8%) increase in equal error rates and 44% (±20%) reduction in rank-1 identification rates. The comparative results at two-weeks and seven-months suggests that there is little difference in aging effects between the two intervals; however, whether the rate of decay increases more drastically in the long-term remains to be seen.

  4. Multi-biometric templates using fingerprint and voice

    Science.gov (United States)

    Camlikaya, Eren; Kholmatov, Alisher; Yanikoglu, Berrin

    2008-03-01

    As biometrics gains popularity, there is an increasing concern about privacy and misuse of biometric data held in central repositories. Furthermore, biometric verification systems face challenges arising from noise and intra-class variations. To tackle both problems, a multimodal biometric verification system combining fingerprint and voice modalities is proposed. The system combines the two modalities at the template level, using multibiometric templates. The fusion of fingerprint and voice data successfully diminishes privacy concerns by hiding the minutiae points from the fingerprint, among the artificial points generated by the features obtained from the spoken utterance of the speaker. Equal error rates are observed to be under 2% for the system where 600 utterances from 30 people have been processed and fused with a database of 400 fingerprints from 200 individuals. Accuracy is increased compared to the previous results for voice verification over the same speaker database.

  5. Template fitting and the large-angle CMB anomalies

    CERN Document Server

    Land, K; Land, Kate; Magueijo, Joao

    2006-01-01

    We investigate two possible explanations for the large-angle anomalies in the Cosmic Microwave Background (CMB): an intrinsically anisotropic model and an inhomogeneous model. We take as an example of the former a Bianchi model (which leaves a spiral pattern in the sky) and of the latter a background model that already contains a non-linear long-wavelength plane wave (leaving a stripy pattern in the sky). We make use of an adaptation of the ``template'' formalism, previously designed to detect galactic foregrounds, to recognize these patterns and produce confidence levels for their detection. The ``corrected'' maps, from which these patterns have been removed, are free of anomalies, in particular their quadrupole and octupole are not planar and their intensities not low. We stress that although the ``template'' detections are not found to be statistically significant they do correct statistically significant anomalies.

  6. ProFIT Prolog with Features, Inheritance and Templates

    CERN Document Server

    Erbach, G

    1995-01-01

    ProFIT is an extension of Standard Prolog with Features, Inheritance and Templates. ProFIT allows the programmer or grammar developer to declare an inheritance hierarchy, features and templates. Sorted feature terms can be used in ProFIT programs together with Prolog terms to provide a clearer description language for linguistic structures. ProFIT compiles all sorted feature terms into a Prolog term representation, so that the built-in Prolog term unification can be used for the unification of sorted feature structures, and no special unification algorithm is needed. ProFIT programs are compiled into Prolog programs, so that no meta-interpreter is needed for their execution. ProFIT thus provides a direct step from grammars developed with sorted feature terms to Prolog programs usable for practical NLP systems.

  7. Custom Fenestration Templates for Endovascular Repair of Juxtarenal Aortic Aneurysms

    Science.gov (United States)

    Leotta, Daniel F.; Starnes, Benjamin W.

    2015-01-01

    Physician-modified endovascular grafts, with fenestrations added to accommodate major branch vessels, provide a means for endovascular treatment of abdominal aortic aneurysms that are adjacent to the renal arteries. Manual measurements of vessel origin locations from CT images, however, take time and can lead to errors in the positions of the fenestrations. To make the fenestration process faster and more accurate, we have developed a procedure to create custom templates that serve as patient-specific guides for graft fenestration. We use a 3D printer to create a clear rigid sleeve that replicates the patient’s aorta and includes holes placed precisely at the locations of the branch vessels. The sleeve is slipped over the graft, the locations of the openings are marked with a pen, and the fenestrations are created after removing the sleeve. Custom fenestration templates can potentially save procedural costs and make minimally-invasive aortic aneurysm repair available to more patients. PMID:25864045

  8. Script identification from images using cluster-based templates

    Science.gov (United States)

    Hochberg, J.G.; Kelly, P.M.; Thomas, T.R.

    1998-12-01

    A computer-implemented method identifies a script used to create a document. A set of training documents for each script to be identified is scanned into the computer to store a series of exemplary images representing each script. Pixels forming the exemplary images are electronically processed to define a set of textual symbols corresponding to the exemplary images. Each textual symbol is assigned to a cluster of textual symbols that most closely represents the textual symbol. The cluster of textual symbols is processed to form a representative electronic template for each cluster. A document having a script to be identified is scanned into the computer to form one or more document images representing the script to be identified. Pixels forming the document images are electronically processed to define a set of document textual symbols corresponding to the document images. The set of document textual symbols is compared to the electronic templates to identify the script. 17 figs.

  9. A database of age-appropriate average MRI templates.

    Science.gov (United States)

    Richards, John E; Sanchez, Carmen; Phillips-Meek, Michelle; Xie, Wanze

    2016-01-01

    This article summarizes a life-span neurodevelopmental MRI database. The study of neurostructural development or neurofunctional development has been hampered by the lack of age-appropriate MRI reference volumes. This causes misspecification of segmented data, irregular registrations, and the absence of appropriate stereotaxic volumes. We have created the "Neurodevelopmental MRI Database" that provides age-specific reference data from 2 weeks through 89 years of age. The data are presented in fine-grained ages (e.g., 3 months intervals through 1 year; 6 months intervals through 19.5 years; 5 year intervals from 20 through 89 years). The base component of the database at each age is an age-specific average MRI template. The average MRI templates are accompanied by segmented partial volume estimates for segmenting priors, and a common stereotaxic atlas for infant, pediatric, and adult participants. The database is available online (http://jerlab.psych.sc.edu/NeurodevelopmentalMRIDatabase/).

  10. Dendrimer Templates for the Formation of Silver Nanoparticles

    Institute of Scientific and Technical Information of China (English)

    LI Guo-ping; LUO Yun-jun; XU Hou-cai; TAN Hui-min

    2006-01-01

    In order to control the size and shape of Ag nanoparticles obtained by using poly(amidoamine) (PAMAM) dendrimer as template, the complexation between Ag+ ions and dendrimer studied extensively by UVVis spectroscopy and FTIR. After the Ag+/PAMAM demdrimer being reduced by direct chemical reduction,Ag (0) nanoparticles was formed, whose structure and characterization were studied by UV-Vis spectroscopy,transmission electron microscopy (TEM) and electron diffraction (ED) respectively. The results reveal that Ag nanoparticles is a kind of face center cubic crystal and its average size is 4.5 nm. The solubility and stability of the solution containing Ag nanoparticles also indicate that dendrimer is a good kind of template, as well as a protective agent.

  11. Proline-catalysed asymmetric ketol cyclizations: The template mechanism revisited

    Indian Academy of Sciences (India)

    R Malathi; D Rajagopal; Zoltan G Hajos; S Swaminathan

    2004-03-01

    A modified template mechanism based on modelling studies of energy minimised complexes is presented for the asymmetric proline-catalysed cyclization of triketones 1, 2 and 3 to the 2, 3-ketols 1a, 2a and 3a respectively. The template model involves a three-point contact as favoured in enzyme-substrate interactions. Our minimisation studies are in agreement with the divergent behaviour of the 6,5-, 6,6- and 6,7-bicyclic systems. They support the high 93.4% ee observed with the 6,5-bicyclic ketol and the lower 73% ee found with the 6,6-bicyclic ketol. The calculations also explain the lack of asymmetric induction with the 6,7-bicyclic system.

  12. The metal site as a template for the metalloprotein structure formation.

    Science.gov (United States)

    Liu, Changlin; Xu, Huibi

    2002-01-01

    Achieving a thorough explanation of the behavior of metal sites in the formation of native metalloprotein structures is an exciting challenge in the biochemistry of metallobiomacromolecules. This study presents a personal insight into the subject. It is proposed that a metal center and its exogenous ligand compose a template. A template may impose a clear stereochemical preference on the loose peptide chains, and organize them into natural stereospecificity via the metal-ligand interaction, a long-range and strong interaction. Therefore, the stable peptide conformation induced by the template effect surrounding a template polyhedron could be called a template-mediated structural motif (TMSM).

  13. RNA-templated DNA ligation for transcript analysis

    OpenAIRE

    Nilsson, Mats; Antson, Dan-Oscar; Barbany, Gisela; Landegren, Ulf

    2001-01-01

    Ligase-mediated gene detection has proven valuable for detection and precise distinction of DNA sequence variants. We have recently shown that T4 DNA ligase can also be used to distinguish single nucleotide variants of RNA sequences. Here we describe parameters that influence RNA-templated DNA ligation by T4 DNA ligase. The reaction proceeds much more slowly, requiring more enzyme, compared to ligation of the same oligonucleotides hybridized to the corresponding DNA se...

  14. PSO-based cloning template design for CNN associative memories.

    Science.gov (United States)

    Giaquinto, A; Fornarelli, G

    2009-11-01

    In this brief, a synthesis procedure for cellular neural networks (CNNs) with space-invariant cloning templates is proposed. The design algorithm is based on the use of the evolutionary algorithm of the particle swarm optimization (PSO) with the application to associative memories. The proposed synthesis procedure takes into account requirements in terms of robustness to parametric variations. Numerical results show that the networks also guarantee good performances in terms of correct recall in the presence of noisy patterns.

  15. Verifying likelihoods for low template DNA profiles using multiple replicates

    Science.gov (United States)

    Steele, Christopher D.; Greenhalgh, Matthew; Balding, David J.

    2014-01-01

    To date there is no generally accepted method to test the validity of algorithms used to compute likelihood ratios (LR) evaluating forensic DNA profiles from low-template and/or degraded samples. An upper bound on the LR is provided by the inverse of the match probability, which is the usual measure of weight of evidence for standard DNA profiles not subject to the stochastic effects that are the hallmark of low-template profiles. However, even for low-template profiles the LR in favour of a true prosecution hypothesis should approach this bound as the number of profiling replicates increases, provided that the queried contributor is the major contributor. Moreover, for sufficiently many replicates the standard LR for mixtures is often surpassed by the low-template LR. It follows that multiple LTDNA replicates can provide stronger evidence for a contributor to a mixture than a standard analysis of a good-quality profile. Here, we examine the performance of the likeLTD software for up to eight replicate profiling runs. We consider simulated and laboratory-generated replicates as well as resampling replicates from a real crime case. We show that LRs generated by likeLTD usually do exceed the mixture LR given sufficient replicates, are bounded above by the inverse match probability and do approach this bound closely when this is expected. We also show good performance of likeLTD even when a large majority of alleles are designated as uncertain, and suggest that there can be advantages to using different profiling sensitivities for different replicates. Overall, our results support both the validity of the underlying mathematical model and its correct implementation in the likeLTD software. PMID:25082140

  16. An X-ray template assessment for distal radial fractures

    Science.gov (United States)

    Lindeboom, R.; Oosterkamp, A. E.; Goslings, J. C.

    2007-01-01

    Background The current method for radiological measurements on plain X-rays of distal radius fractures is unreliable. We examined the reproducibility of a new X-ray assessment technique—where the uninjured side is used as a template for the injured side—compared to the conventional assessment technique. Methods X-rays of 30 patients with a unilateral distal radial fracture were included reflecting the prevalence of AO fracture types in clinical practice. Eight experienced observers assessed these X-rays on two separated occasions (2-month interval) using the traditional measurement technique and the template technique. Reproducibility of the X-ray assessments was quantified by intraclass correlations and weighted kappa coefficients. Results The reproducibility of the radial length measurement did not improve nor did the volar angulation measurement. However, marked improvement in reproducibility was observed for the radial inclination measurement, the kappa increased from 0.36 (95 % CI; 0.30–0.41) to 0.49 (95 % CI; 0.43–0.55) in the template technique. As a result, the classification of the reduction results (Lidström score) greatly improved. The overall kappa for the Lidström score improved from 0.37 (95 % CI; 0.31/0.43) to 0.59 (0.52/0.63). Conclusion The assessment technique using the uninjured side as a template for the injured side resulted only in an improved reproducibility of the radial inclination measurement which in turn resulted in an improved classification reproducibility of the reduction results. PMID:17622544

  17. A novel supramolecular organogel nanotubular template approach for conducting nanomaterials.

    Science.gov (United States)

    Anilkumar, P; Jayakannan, M

    2010-01-21

    We report a unique supramolecular organogel template approach for conducting polyaniline nanomaterials. A novel organogel based on sulfonic acid dopant was designed and developed from renewable resource 3-pentadecyl phenol via ring-opening of 1,4-butane sultone. The amphiphilic dopant molecule formed thermo-reversible supramolecular organogel in highly polar solvents like alcohols. The self-assembled fibril network morphology of the gel was confirmed by scanning electron microscopy (SEM) and atomic force microscopy. Transmission electron microscopy (TEM) revealed that the inner part of the fibrous gel is nanotubular with the pore diameter of approximately 75 nm. The organogel nanotubular morphology was retained even in the presence of aniline+dopant complex, and the aniline monomers occupied the hydrophobic nanopockets provided by the amphiphilic dopant. The chemical oxidative polymerization of the dopant+aniline organogel template produced well-defined polyaniline nanofibers. The polymerization was carried out at various temperatures to establish the role of the physical state and stability of the organogel on the morphology. The sulfonic acid molecule acts both as self-assembled molecular template for the synthesis of polymer nanomaterial as well as anionic counterpart for stabilizing the positively charged conducting polymer chains. The gel template played a pivotal role in directing polyaniline chains to form nanofibers and also manipulating the number of other properties such as conductivity, solubility, percent crystallinity, and solid-state ordering, etc. Temperature-dependent electrical conductivity measurements revealed that the nanomaterials showed typical linear ohmic behavior and also followed the 3-D VRH model at elevated temperatures.

  18. Multifunctional Graphene/Platinum/Nafion Hybrids via Ice Templating

    KAUST Repository

    Estevez, Luis

    2011-04-27

    We report the synthesis of multifunctional hybrids in both films and bulk form, combining electrical and ionic conductivity with porosity and catalytic activity. The hybrids are synthesized by a two-step process: (a) ice templation of an aqueous suspension comprised of Nafion, graphite oxide, and chloroplatinic acid to form a microcellular porous network and (b) mild reduction in hydrazine or monosodium citrate which leads to graphene-supported Pt nanoparticles on a Nafion scaffold. © 2011 American Chemical Society.

  19. Sequence-Controlled Polymerization on Facially Amphiphilic Templates at Interfaces

    Science.gov (United States)

    2016-06-14

    brown oil . Purification by distillation (120 °C, 0.15 torr) gave the pure product as a clear, colorless oil that slowly solidifies to a waxy...oxidation to the carboxylic acid product. The final product is purified by distillation and the clear, colorless oil slowly solidifies upon standing at...to give longer polythiophenes (n= 16, 32, 64…). The procedures for synthesis and purification require independent optimization for each template

  20. Cu(I)/Cu(II) templated functional pseudorotaxanes and rotaxanes

    Indian Academy of Sciences (India)

    Subrata Saha; Pradyut Ghosh

    2012-11-01

    Threaded complexes like pseudorotaxanes, rotaxanes based on Cu(I)/Cu(II) ions have shown to be promising for the construction of mechanically interlocked molecular-level architectures. In this short review, we focus on the synthetic strategies developed to construct pseudorotaxanes and rotaxanes using Cu(I)/Cu(II) ions as template. Further, brief discussions on chemical and mechanical properties associated with some of the selected to Cu(I)/Cu(II) based pseudorotaxanes and rotaxanes are presented.

  1. Haptotropic Migration of Metal Templates on Arene Surfaces

    Institute of Scientific and Technical Information of China (English)

    K.H.Dtz; H.C.Jahr; J.Bennewitz; J.Dubarle-offner

    2007-01-01

    1 Results The chromium-templated benzannulation of arylcarbenes by alkynes provides a direct regio- and diastereoselective access to densely functionalized chromium arenes[1]. The chromium fragment undergoes a haptotropic migration along the π-face of the fused arenes which can be controlled by thermodynamics,by the substitution pattern of the arene and by the metal coligand sphere(See Scheme 1).The controlled regioselective labeling of benzene rings can be exploited in diastereoselective C-C bond forma...

  2. [Low template DNA profiling and its application in forensic science].

    Science.gov (United States)

    Ma, Yan; Kuang, Jin-zhi; Hou, Yi-ping

    2010-04-01

    Low template DNA (LTDNA) has been widely applied in the field of forensic science in recent years. However, the application of low copy number(LCN) analysis is still controversial in certain forensic. This paper focus on the definition of LCN and LTDNA, casework because of its inherent limiting factors. the validity and application of LCN in forensic science, methods of typing, quality control, replicate analysis, detection thresholds and then reviews the latest development of LCN in forensic science.

  3. Template preparation for rapid PCR in Colletotrichum lindemuthianum

    Directory of Open Access Journals (Sweden)

    Roca M. Gabriela

    2003-01-01

    Full Text Available Isolation of DNA for PCR is time-consuming and involves many reagents. The aim of this work was to optimise a rapid and easy PCR methodology without previous DNA isolation. Different strains of the phytopathogenic fungus Colletotrichum lindemuthianum were used. Protoplasts were generated using lytic enzymes under high incubation temperatures using different methodologies to obtain the template. A rapid (10 minute methodology was successful for smaller amplicons (<750 bp.

  4. Home Automation : Smart home technology and template house design

    OpenAIRE

    Zheng, Zeya

    2013-01-01

    In this thesis, home automation’s general knowledge, technology information and each component will be introduced to the reader in the first half of the whole thesis. In the second half, thesis includes the Home Automation template design and market competitiveness analysis. The author assumes that the reader is going to spend lots of money to have a smart home. In this situation, the author introduces the home automation to the reader at each component. So the reader in this thesis actu...

  5. Synthesis and catalytic activity of polysaccharide templated nanocrystalline sulfated zirconia

    Energy Technology Data Exchange (ETDEWEB)

    Sherly, K. B.; Rakesh, K. [Mahatma Gandhi University Regional Research Center in Chemistry, Department of Chemistry, Mar Athanasius College, Kothamangalam-686666, Kerala (India)

    2014-01-28

    Nanoscaled materials are of great interest due to their unique enhanced optical, electrical and magnetic properties. Sulfate-promoted zirconia has been shown to exhibit super acidic behavior and high activity for acid catalyzed reactions. Nanocrystalline zirconia was prepared in the presence of polysaccharide template by interaction between ZrOCl{sub 2}⋅8H{sub 2}O and chitosan template. The interaction was carried out in aqueous phase, followed by the removal of templates by calcination at optimum temperature and sulfation. The structural and textural features were characterized by powder XRD, TG, SEM and TEM. XRD patterns showed the peaks of the diffractogram were in agreement with the theoretical data of zirconia with the catalytically active tetragonal phase and average crystalline size of the particles was found to be 9 nm, which was confirmed by TEM. TPD using ammonia as probe, FTIR and BET surface area analysis were used for analyzing surface features like acidity and porosity. The BET surface area analysis showed the sample had moderately high surface area. FTIR was used to find the type species attached to the surface of zirconia. UV-DRS found the band gap of the zirconia was found to be 2.8 eV. The benzylation of o-xylene was carried out batchwise in atmospheric pressure and 433K temperature using sulfated zirconia as catalyst.

  6. BSA-imprinted synthetic receptor for reversible template recognition.

    Science.gov (United States)

    Wang, Huafang; He, Yunhua; He, Xiwen; Li, Wenyou; Chen, Langxing; Zhang, Yukui

    2009-06-01

    A novel approach to the manufacturing of protein-responsive imprints on a home-made chitosan substrate was established together with m-aminophenylboronic acid (APBA) as a functional monomer. The produced polymers were characterized using both (1) equilibrium adsorption assays and (2) high performance liquid chromatography analysis. Results confirmed that the synthesized BSA-MIP (molecularly imprinted polymer) has a high affinity towards its template compared to the determined control proteins. The produced BSA-MIP featured largely in its good adsorption reversibility, especially in competitive binding assays, which is of great biological significance in separations. Non-specific binding was reduced to almost zero in a BSA/BHb competitive binding event. An excellent HPLC profile of template recognition was found for BSA-MIP, even under harsh mobile phase conditions. In the present work, the adopted trapped-template-release method permits recovery of bound BSA [1]. The strategy of making an artificial protein-receptor with high adsorption affinity and reversibility is promising in on-line isolation of target protein from complicated biological environments.

  7. Synthesis and characterization of guar gum templated hybrid nano silica.

    Science.gov (United States)

    Singh, V; Singh, S K; Pandey, S; Sanghi, R

    2011-08-01

    The objective of the present study was the fabrication of green adsorbent hybrids for which native guar gum was used as template to polymerize tetraethoxysilane. The properties and performances of the hybrids could be tailored by using varying molecular sizes of the partially depolymerized guar gum templates of various molecular sizes as control. Zn(II) uptake from aqueous solution was used as a criterion for evaluating the adsorbent efficiency. The optimum material (H4) in terms of maximum Zn(II) uptake, was obtained when the template size used was 375 kDa at a calcination temperature of 700°C. H4 was also evaluated for Ca(II), Mg(II), Cd(II) and Hg(II) adsorption. To explore the other applicability areas, the hybrids have been extensively characterized using FTIR, XRD, TGA-DTA, PL, SEM, TEM and BET analyses. H4 was found to be as efficient as previously reported vinyl modified-silica nanohybrids. It had a high surface area (264 m(2)/g) with silica nanoparticles in the size range of 90-140 nm. Being thermally very stable and photoluminescent, the material can be potentially used for many biological, medical and environmental applications.

  8. THE MODELING TEMPLATE OF ENTERPRISE ARCHITECTURE OF PUBLIC CATERING

    Directory of Open Access Journals (Sweden)

    Baranovskaya T. P.

    2016-02-01

    Full Text Available The article presents results of developing the template architecture for an enterprise of public catering. As a prototype for the template, we have selected the restaurant called Phoenix. The development pattern of architecture was based on the typical features of public catering establishments described in the business model. The main results of the study are: generalized business model, built on the method developed by A. Osterwalder, graphical layout of business processes, implemented in the tool environment, All Fusion Process Modeler (BPWin and developed models of decomposition of business processes, model business event, the location of the model functions, integration model, models, data architecture, class diagram, application portfolio and technology infrastructure. The architecture of a company of public catering may serve as a template for other businesses whose business model matches the business model of the research object. We have developed a tree of objectives and functions, the model of the enterprise, the data architecture, technology infrastructure and application portfolio are typical for the industry. The results of the study have practical value and can be used by the industry as at the design stage and improvement

  9. 3-D template simulation system in Total Hip Arthroplasty

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, Nobuhiko [Nagoya City Univ. (Japan). Medical School

    2000-09-01

    In Total Hip Arthroplastry, 2D template on Plain X-ray is usually used for preoperative planning. But deformity and contracture can cause malposition and measurement error. To reduce those problems, a 3D preoperative simulation system was developed. Three methods were compared in this study. One is to create very accurate AP and ML images which can use for standard 2D template. One is fully 3D preoperative template system using computer graphics. Last one is substantial simulation using stereo-lithography model. 3D geometry data of the bone was made from Helical 3-D CT data. AP and ML surface cutting 3D images of the femur were created using workstation (Advantage Workstation; GE Medical Systems). The extracted 3D geometry was displayed on personal computer using Magics (STL data visualization software), then 3D geometry of the stem was superimposed in it. The full 3D simulation system made it possible to observe the bone and stem geometry from any direction and by any section view. Stereo-lithography model was useful for detailed observation of the femur anatomy. (author)

  10. International developments in openEHR archetypes and templates.

    Science.gov (United States)

    Leslie, Heather

    2008-01-01

    Electronic Health Records (EHRs) are a complex knowledge domain. The ability to design EHRs to cope with the changing nature of health knowledge, and to be shareable, has been elusive. A recent pilot study1 tested the applicability of the CEN 13606 as an electronic health record standard. Using openEHR archetypes and tools2, 650 clinical content specifi cations (archetypes) were created (e.g. for blood pressure) and re-used across all clinical specialties and contexts. Groups of archetypes were aggregated in templates to support clinical information gathering or viewing (e.g. 80 separate archetypes make up the routine antenatal visit record). Over 60 templates were created for use in the emergency department, antenatal care and delivery of an infant, and paediatric hearing loss assessment. The primary goal is to define a logical clinical record architecture for the NHS but potentially, with archetypes as the keystone, shareable EHRs will also be attainable. Archetype and template development work is ongoing, with associated evaluation occurring in parallel.

  11. Preparation of silver nanoparticle via active template under ultrasonic

    Institute of Scientific and Technical Information of China (English)

    ZHENG Min; WANG Zuo-shan; ZHU Ya-wei

    2006-01-01

    A novel method was described for the production of silver nanoparticle by using nano-carbon as active template. Special ultrasonic condition was used to assure the active effect of the template and achieve an even and stable micro-reactor system,therefore yield uniform silver nanoparticle without obvious agglomeration. By laser granularity instrument measurement, the silver nanoparticles show a mean diameter of 20.4 nm and narrow distribution between 18.7 nm and 23.0 nm according to the optimum technology. Regular spherical morphology can be observed by transmission electron microscopy(TEM). X-ray diffraction analysis indicates that Ag+ is deoxidized to form metal Ag during producing precursor, subsequent calcinations promote phase transformation from nonholonomic crystal to complete cubic crystal, which is consistent with the standard JCPDS card of silver. The results reveal that the nano-carbon in active template system not only exerts micro-reactor and steric stabilization effect, but also acts as reducing agent during the reaction.

  12. TEMPLATE-ASSISTED FABRICATION AND DIELECTROPHORETIC MANIPULATION OF PZT MICROTUBES

    Directory of Open Access Journals (Sweden)

    VLADIMÍR KOVAĽ

    2012-09-01

    Full Text Available Mesoscopic high aspect ratio ferroelectric tube structures of a diverse range of compositions with tailored physical properties can be used as key components in miniaturized flexible electronics, nano- and micro-electro-mechanical systems, nonvolatile FeRAM memories, and tunable photonic applications. They are usually produced through advanced “bottom-up” or “topdown” fabrication techniques. In this study, a template wetting approach is employed for fabrication of Pb(Zr0.52Ti0.48O3 (PZT microtubes. The method is based on repeated infiltration of precursor solution into macroporous silicon (Si templates at a sub-atmospheric pressure. Prior to crystallization at 750°C, free-standing tubes of a 2-μm outer diameter, extending to over 30 μm in length were released from the Si template using a selective isotropic-pulsed XeF2 reactive ion etching. To facilitate rapid electrical characterization and enable future integration process, directed positioning and aligning of the PZT tubes was performed by dielectrophoresis. The electric field-assisted technique involves an alternating electric voltage that is applied through pre-patterned microelectrodes to a colloidal suspension of PZT tubes dispersed in isopropyl alcohol. The most efficient biasing for the assembly of tubes across the electrode gap of 12 μm was a square wave signal of 5 Vrms and 10 Hz. By varying the applied frequency in between 1 and 10 Hz, an enhancement in tube alignment was obtained.

  13. Secure Minutiae-Based Fingerprint Templates Using Random Triangle Hashing

    Science.gov (United States)

    Jin, Zhe; Jin Teoh, Andrew Beng; Ong, Thian Song; Tee, Connie

    Due to privacy concern on the widespread use of biometric authentication systems, biometric template protection has gained great attention in the biometric research recently. It is a challenging task to design a biometric template protection scheme which is anonymous, revocable and noninvertible while maintaining acceptable performance. Many methods have been proposed to resolve this problem, and cancelable biometrics is one of them. In this paper, we propose a scheme coined as Random Triangle Hashing which follows the concept of cancelable biometrics in the fingerprint domain. In this method, re-alignment of fingerprints is not required as all the minutiae are translated into a pre-defined 2 dimensional space based on a reference minutia. After that, the proposed Random Triangle hashing method is used to enforce the one-way property (non-invertibility) of the biometric template. The proposed method is resistant to minor translation error and rotation distortion. Finally, the hash vectors are converted into bit-strings to be stored in the database. The proposed method is evaluated using the public database FVC2004 DB1. An EER of less than 1% is achieved by using the proposed method.

  14. Expected net gain data of low-template DNA analyses

    Directory of Open Access Journals (Sweden)

    Simone Gittelson

    2016-09-01

    Full Text Available Low-template DNA analyses are affected by stochastic effects which can produce a configuration of peaks in the electropherogram (EPG that is different from the genotype of the DNA׳s donor. A probabilistic and decision-theoretic model can quantify the expected net gain (ENG of performing a DNA analysis by the difference between the expected value of information (EVOI and the cost of performing the analysis. This article presents data on the ENG of performing DNA analyses of low-template DNA for a single amplification, two replicate amplifications, and for a second replicate amplification given the result of a first analysis. The data were obtained using amplification kits AmpFlSTR Identifiler Plus and Promega׳s PowerPlex 16 HS, an ABI 3130xl genetic sequencer, and Applied Biosystem׳s GeneMapper ID-X software. These data are supplementary to an original research article investigating whether a forensic DNA analyst should perform a single DNA analysis or two replicate analyses from a decision-theoretic point of view, entitled “Low-template DNA: a single DNA analysis or two replicates?” (Gittelson et al., 2016 [1].

  15. Template-assisted growth of transparent plasmonic nanowire electrodes

    Science.gov (United States)

    Caterina Giordano, Maria; Repetto, Diego; Mennucci, Carlo; Carrara, Angelica; Buatier de Mongeot, Francesco

    2016-12-01

    Self-organized nanowire arrays are confined by glancing-angle Au deposition on nanopatterned glass templates prepared by ion beam sputtering. The semi-transparent 1D nanowire arrays are extended over large cm2 areas and are endowed with excellent electrical conductivity competitive with the best transparent conductive oxides (sheet resistance in the range of 5-20 Ohm sq-1). In addition, the nanowires support localized surface plasmon (LSP) resonances, which are easily tunable into the visible and near infrared spectrum and are selectively excited with incident light polarized perpendicularly to the wires. Such substrates, thus, behave as multifunctional nanoelectrodes, which combine good optoelectronic performance with dichroic plasmonic excitation. The electrical percolation process of the Au nanoelectrodes was monitored in situ during growth at glancing angle, both on flat and nanopatterned glass templates. In the first case, we observed a universal scaling of the differential percolation rate, independently of the glancing deposition angle, while deviations from the universal scaling were observed when Au was confined on nanopatterned templates. In the latter case, the pronounced shadowing effect promotes the growth of locally connected 1D Au nanosticks on the ‘illuminated’ ripple ridges, thus, introducing strong anisotropies with respect to the case of a 2D percolating network.

  16. Physical controls on directed virus assembly at nanoscale chemical templates

    Energy Technology Data Exchange (ETDEWEB)

    Cheung, C L; Chung, S; Chatterji, A; Lin, T; Johnson, J E; Hok, S; Perkins, J; De Yoreo, J

    2006-05-10

    Viruses are attractive building blocks for nanoscale heterostructures, but little is understood about the physical principles governing their directed assembly. In-situ force microscopy was used to investigate organization of Cowpea Mosaic Virus engineered to bind specifically and reversibly at nanoscale chemical templates with sub-30nm features. Morphological evolution and assembly kinetics were measured as virus flux and inter-viral potential were varied. The resulting morphologies were similar to those of atomic-scale epitaxial systems, but the underlying thermodynamics was analogous to that of colloidal systems in confined geometries. The 1D templates biased the location of initial cluster formation, introduced asymmetric sticking probabilities, and drove 1D and 2D condensation at subcritical volume fractions. The growth kinetics followed a t{sup 1/2} law controlled by the slow diffusion of viruses. The lateral expansion of virus clusters that initially form on the 1D templates following introduction of polyethylene glycol (PEG) into the solution suggests a significant role for weak interaction.

  17. Chitosan as template for the synthesis of ceria nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Sifontes, A.B., E-mail: asifonte@ivic.gob.ve [Centro de Quimica, Instituto Venezolano de Investigaciones Cientificas, Caracas 1020-A (Venezuela, Bolivarian Republic of); Gonzalez, G.; Ochoa, J.L. [Centro de Ingenieria, Instituto Venezolano de Investigaciones Cientificas, Caracas 1020-A (Venezuela, Bolivarian Republic of); Tovar, L.M.; Zoltan, T. [Centro de Quimica, Instituto Venezolano de Investigaciones Cientificas, Caracas 1020-A (Venezuela, Bolivarian Republic of); Canizales, E. [PDVSA, Intevep, Caracas 1020-A (Venezuela, Bolivarian Republic of)

    2011-11-15

    Graphical abstract: Cerium oxide nanoparticles with cubic fluorite structure were prepared using chitosan as template, cerium nitrate as a starting material and sodium hydroxide as a precipitating agent. Calcinated powders at 350 {sup o}C contain agglomerated particles with average particle size of {approx}4 nm, very high porosity and foam-like morphology formed by open and close pores. Highlights: {yields} Pure CeO{sub 2} nanoparticles can take place using chitosan as template. {yields} A porous material was obtained. {yields} Blueshifts in the ultraviolet absorption spectra have been observed in cerium oxide nanocrystallites. -- Abstract: Cerium oxide (CeO{sub 2}), nanoparticles were prepared using chitosan as template, cerium nitrate as a starting material and sodium hydroxide as a precipitating agent. The resultant ceria-chitosan spheres were calcined at 350 {sup o}C. The synthesized powders were characterized by, XRD, HRTEM, UV-vis, FTIR, and TG-DTA. The average size of the nanoparticles obtained was {approx}4 nm and BET specific surface area {approx}105 m{sup 2} g{sup -1}. Blueshifts in the ultraviolet absorption spectra have been observed in cerium oxide nanocrystallites. The band-gap was found to be 4.5 eV. The blueshifts are well explained for diameters down to less than a few nanometers by the change in the electronic band structure.

  18. Synthesis and catalytic activity of polysaccharide templated nanocrystalline sulfated zirconia

    Science.gov (United States)

    Sherly, K. B.; Rakesh, K.

    2014-01-01

    Nanoscaled materials are of great interest due to their unique enhanced optical, electrical and magnetic properties. Sulfate-promoted zirconia has been shown to exhibit super acidic behavior and high activity for acid catalyzed reactions. Nanocrystalline zirconia was prepared in the presence of polysaccharide template by interaction between ZrOCl2ṡ8H2O and chitosan template. The interaction was carried out in aqueous phase, followed by the removal of templates by calcination at optimum temperature and sulfation. The structural and textural features were characterized by powder XRD, TG, SEM and TEM. XRD patterns showed the peaks of the diffractogram were in agreement with the theoretical data of zirconia with the catalytically active tetragonal phase and average crystalline size of the particles was found to be 9 nm, which was confirmed by TEM. TPD using ammonia as probe, FTIR and BET surface area analysis were used for analyzing surface features like acidity and porosity. The BET surface area analysis showed the sample had moderately high surface area. FTIR was used to find the type species attached to the surface of zirconia. UV-DRS found the band gap of the zirconia was found to be 2.8 eV. The benzylation of o-xylene was carried out batchwise in atmospheric pressure and 433K temperature using sulfated zirconia as catalyst.

  19. High resolution nanoimprint templates for dual damascene: fabrication and imprint results

    Science.gov (United States)

    Irmscher, Mathias; Butschke, Joerg; Carpio, Ron; Chao, Brook; Jen, Wei-Lun; Koepernik, Corinna; Nedelmann, Lorenz; Owens, Jordan; Palmieri, Frank; Pritschow, Marcus; Reuter, Christian; Sailer, Holger; Satoodeh, Ken; Wetzel, Jeff; Wilks, Bruce; Willson, Grant

    2008-03-01

    A dual damascene template fabrication process has been developed, which enables the structuring of high-resolution, high-aspect pillars on top of lines. Based on this technology templates with three different designs have been fabricated and characterized. Two templates are dedicated for an assessment of the fabrication process using a regular test design on one hand and an arbitrary CMOS design on the other hand. With the third template via chains shall be later realized as demonstrator for electrical tests. The templates have been imprinted in resist and sacrificial material on an Imprio 55 and an Imprio 100 tool. The usability of each fabricated template could be confirmed for the specific application. For the template manufacturing a Vistec variable shape e-beam (VSB) writer SB352HR and appropriate positive-tone and negative-tone chemically amplified resists (CAR) have been used.

  20. Template for success: using a resident-designed sign-out template in the handover of patient care.

    Science.gov (United States)

    Clark, Clancy J; Sindell, Sarah L; Koehler, Richard P

    2011-01-01

    Report our implementation of a standardized handover process in a general surgery residency program. The standardized handover process, sign-out template, method of implementation, and continuous quality improvement process were designed by general surgery residents with support of faculty and senior hospital administration using standard work principles and business models of the Virginia Mason Production System and the Toyota Production System. Nonprofit, tertiary referral teaching hospital. General surgery residents, residency faculty, patient care providers, and hospital administration. After instruction in quality improvement initiatives, a team of general surgery residents designed a sign-out process using an electronic template and standard procedures. The initial implementation phase resulted in 73% compliance. Using resident-driven continuous quality improvement processes, real-time feedback enabled residents to modify and improve this process, eventually attaining 100% compliance and acceptance by residents. The creation of a standardized template and protocol for patient handovers might eliminate communication failures. Encouraging residents to participate in this process can establish the groundwork for successful implementation of a standardized handover process. Integrating a continuous quality-improvement process into such an initiative can promote active participation of busy general surgery residents and lead to successful implementation of standard procedures. Copyright © 2011 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  1. Dopamine-Imprinted Polymers: Template-Monomer Interactions, Analysis of Template Removal and Application to Solid Phase Extraction

    Directory of Open Access Journals (Sweden)

    Mirosław Szutowski

    2007-11-01

    Full Text Available A dopamine-imprinted polymer (MIP was prepared in aqueous methanolsolution at 60oC by free-radical cross-linking polymerization of methacrylic acid in thepresence of ethylene glycol dimethacrylate as the cross-linker and dopamine hydrochlorideas the template molecule. Its ability to isolate dopamine was evaluated as the basis of asolid phase extraction procedure and compared with that of a non-imprinted polymer(NIP. The binding of dopamine was 84.1% and 29.1% for MIP and NIP, respectively.Various reported post-polymerization treatments to reduce template bleeding wereexamined. In our case the lowest bleeding was achieved after applying a combinedprocedure: continuous extraction in a Soxhlet apparatus (CE, followed by microwave-assisted extraction (ME to a level of 0.061 μg/mL. A simplified model of the template-monomer complexes allowed rationalization of monomer choice based on the heats ofcomplex formation at a PM3 level of theory.

  2. How to Test Mandatory Text Templates: The European Patient Information Leaflet.

    Science.gov (United States)

    Pander Maat, Henk; Lentz, Leo; Raynor, David K

    2015-01-01

    The structure of patient information leaflets (PILs) supplied with medicines in the European Union is largely determined by a regulatory template, requiring a fixed sequence of pre-formulated headings and sub-headings. The template has been criticized on various occasions, but it has never been tested with users. This paper proposes an alternative template, informed by templates used in the USA and Australia, and by previous user testing.The main research question is whether the revision better enables users to find relevant information. Besides, the paper proposes a methodology for testing templates. Testing document templates is complex, as they are "empty". For both the current and the alternative template, we produced a document with bogus text and real headings (reflecting the empty template) and a real-life document with readable text (reflecting the "filled" template). The documents were tested both in Dutch and in English, with 64 British and 64 Dutch users. The test used a set of scenario questions that covers the full range of template (sub)topics; users needed to indicate the text locations where they expected each question to be answered. The revised template improved findability of information; this effect was strongest for the "filled" template with readable text. When participants were shown both filled templates, there was a clear preference for the revised template. A closer analysis of the findability data revealed question-specific effects of topic grouping, topic ordering, subtopic granularity and wording of headings. Most of these favoured the revised template, but our revision led to adverse effects as well, for instance in the new heading Check with your doctor. Language-specific effects showed that the wording of the headings is a delicate task. Generally, we conclude that document template designs can be analyzed in terms of the four parameters grouping, ordering, granularity and wording. Furthermore, they need to be tested on their effects

  3. How to Test Mandatory Text Templates: The European Patient Information Leaflet.

    Directory of Open Access Journals (Sweden)

    Henk Pander Maat

    Full Text Available The structure of patient information leaflets (PILs supplied with medicines in the European Union is largely determined by a regulatory template, requiring a fixed sequence of pre-formulated headings and sub-headings. The template has been criticized on various occasions, but it has never been tested with users. This paper proposes an alternative template, informed by templates used in the USA and Australia, and by previous user testing.The main research question is whether the revision better enables users to find relevant information. Besides, the paper proposes a methodology for testing templates. Testing document templates is complex, as they are "empty". For both the current and the alternative template, we produced a document with bogus text and real headings (reflecting the empty template and a real-life document with readable text (reflecting the "filled" template. The documents were tested both in Dutch and in English, with 64 British and 64 Dutch users. The test used a set of scenario questions that covers the full range of template (subtopics; users needed to indicate the text locations where they expected each question to be answered. The revised template improved findability of information; this effect was strongest for the "filled" template with readable text. When participants were shown both filled templates, there was a clear preference for the revised template. A closer analysis of the findability data revealed question-specific effects of topic grouping, topic ordering, subtopic granularity and wording of headings. Most of these favoured the revised template, but our revision led to adverse effects as well, for instance in the new heading Check with your doctor. Language-specific effects showed that the wording of the headings is a delicate task. Generally, we conclude that document template designs can be analyzed in terms of the four parameters grouping, ordering, granularity and wording. Furthermore, they need to be tested

  4. Efficient generation and optimization of stochastic template banks by a neighboring cell algorithm

    Science.gov (United States)

    Fehrmann, Henning; Pletsch, Holger J.

    2014-12-01

    Placing signal templates (grid points) as efficiently as possible to cover a multidimensional parameter space is crucial in computing-intensive matched-filtering searches for gravitational waves, but also in similar searches in other fields of astronomy. To generate efficient coverings of arbitrary parameter spaces, stochastic template banks have been advocated, where templates are placed at random while rejecting those too close to others. However, in this simple scheme, for each new random point its distance to every template in the existing bank is computed. This rapidly increasing number of distance computations can render the acceptance of new templates computationally prohibitive, particularly for wide parameter spaces or in large dimensions. This paper presents a neighboring cell algorithm that can dramatically improve the efficiency of constructing a stochastic template bank. By dividing the parameter space into subvolumes (cells), for an arbitrary point an efficient hashing technique is exploited to obtain the index of its enclosing cell along with the parameters of its neighboring templates. Hence only distances to these neighboring templates in the bank are computed, massively lowering the overall computing cost, as demonstrated in simple examples. Furthermore, we propose a novel method based on this technique to increase the fraction of covered parameter space solely by directed template shifts, without adding any templates. As is demonstrated in examples, this method can be highly effective.

  5. Content analysis of reporting templates and free-text radiology reports.

    Science.gov (United States)

    Hong, Yi; Kahn, Charles E

    2013-10-01

    The Radiological Society of North America (RSNA) has developed a set of templates for structured reporting of radiology results. To measure how much of the content of conventional narrative ("free-text") reports is covered by the concepts included in the RSNA reporting templates, we selected five reporting templates that represented a variety of imaging modalities and organ systems. From a sample of 8,275 consecutive, de-identified radiology reports from an academic medical center, we identified one corresponding imaging procedure code for each reporting template. The reports were annotated with RadLex and SNOMED CT terms using the BioPortal Annotator web service. The reporting templates we examined accounted for 17 to 49 % of the concepts that actually appeared in a sample of corresponding radiology reports. The findings suggest that the concepts that appear in the reporting templates occur frequently within free-text clinical reports; thus, the templates provide useful coverage of the "domain of discourse" in radiology reports. The techniques used in this study may be helpful to guide the development of reporting templates by identifying concepts that occur frequently in radiology reports, to evaluate the coverage of existing templates, and to establish global benchmarks for reporting templates.

  6. On the construction of a new stellar classification template library for the LAMOST spectral analysis pipeline

    Energy Technology Data Exchange (ETDEWEB)

    Wei, Peng; Luo, Ali; Li, Yinbi; Tu, Liangping; Wang, Fengfei; Zhang, Jiannan; Chen, Xiaoyan; Hou, Wen; Kong, Xiao; Wu, Yue; Zuo, Fang; Yi, Zhenping; Zhao, Yongheng; Chen, Jianjun; Du, Bing; Guo, Yanxin; Ren, Juanjuan [Key Laboratory of Optical Astronomy, National Astronomical Observatories, Chinese Academy of Sciences, Beijing 100012 (China); Pan, Jingchang; Jiang, Bin; Liu, Jie, E-mail: lal@nao.cas.cn, E-mail: weipeng@nao.cas.cn [School of Mechanical, Electrical, and Information Engineering, Shandong University, Weihai 264209 (China); and others

    2014-05-01

    The LAMOST spectral analysis pipeline, called the 1D pipeline, aims to classify and measure the spectra observed in the LAMOST survey. Through this pipeline, the observed stellar spectra are classified into different subclasses by matching with template spectra. Consequently, the performance of the stellar classification greatly depends on the quality of the template spectra. In this paper, we construct a new LAMOST stellar spectral classification template library, which is supposed to improve the precision and credibility of the present LAMOST stellar classification. About one million spectra are selected from LAMOST Data Release One to construct the new stellar templates, and they are gathered in 233 groups by two criteria: (1) pseudo g – r colors obtained by convolving the LAMOST spectra with the Sloan Digital Sky Survey ugriz filter response curve, and (2) the stellar subclass given by the LAMOST pipeline. In each group, the template spectra are constructed using three steps. (1) Outliers are excluded using the Local Outlier Probabilities algorithm, and then the principal component analysis method is applied to the remaining spectra of each group. About 5% of the one million spectra are ruled out as outliers. (2) All remaining spectra are reconstructed using the first principal components of each group. (3) The weighted average spectrum is used as the template spectrum in each group. Using the previous 3 steps, we initially obtain 216 stellar template spectra. We visually inspect all template spectra, and 29 spectra are abandoned due to low spectral quality. Furthermore, the MK classification for the remaining 187 template spectra is manually determined by comparing with 3 template libraries. Meanwhile, 10 template spectra whose subclass is difficult to determine are abandoned. Finally, we obtain a new template library containing 183 LAMOST template spectra with 61 different MK classes by combining it with the current library.

  7. Design and Fabrication of a Precision Template for Spine Surgery Using Selective Laser Melting (SLM

    Directory of Open Access Journals (Sweden)

    Di Wang

    2016-07-01

    Full Text Available In order to meet the clinical requirements of spine surgery, this paper proposes the fabrication of the customized template for spine surgery through computer-aided design. A 3D metal printing-selective laser melting (SLM technique was employed to directly fabricate the 316L stainless steel template, and the metal template with tiny locating holes was used as an auxiliary tool to insert spinal screws inside the patient’s body. To guarantee accurate fabrication of the template for cervical vertebra operation, the contact face was placed upwards to improve the joint quality between the template and the cervical vertebra. The joint surface of the printed template had a roughness of Ra = 13 ± 2 μm. After abrasive blasting, the surface roughness was Ra = 7 ± 0.5 μm. The surgical metal template was bound with the 3D-printed Acrylonitrile Butadiene Styrene (ABS plastic model. The micro-hardness values determined at the cross-sections of SLM-processed samples varied from HV0.3 250 to HV0.3 280, and the measured tensile strength was in the range of 450 MPa to 560 MPa, which showed that the template had requisite strength. Finally, the metal template was clinically used in the patient’s surgical operation, and the screws were inserted precisely as the result of using the auxiliary template. The geometrical parameters of the template hole (e.g., diameter and wall thickness were optimized, and measures were taken to optimize the key geometrical units (e.g., hole units in metal 3D printing. Compared to the traditional technology of screw insertion, the use of the surgical metal template enabled the screws to be inserted more easily and accurately during spinal surgery. However, the design of the high-quality template should fully take into account the clinical demands of surgeons, as well as the advice of the designing engineers and operating technicians.

  8. Liquid as template for next generation micro devices

    Energy Technology Data Exchange (ETDEWEB)

    Charmet, Jerome; Haquette, Henri; Laux, Edith; Keppner, Herbert [HES-SO ARC, Institut des Microtechnologies Appliquees, La Chaux de Fonds (Switzerland); Gorodyska, Ganna; Textor, Marcus [ETHZ, BioInterfaceGroup, Zuerich (Switzerland); Durante, Guido Spinola; Portuondo-Campa, Erwin; Knapp, Helmut [CSEM Centre Suisse d' Electronique et de Microtechnique SA, Alpnach (Switzerland); Bitterli, Roland; Noell, Wilfried, E-mail: Jerome.Charmet@he-arc.c [Ecole Polytechnique Federale de Lausanne, Institute of Microengineering, Sensors, Actuators and Microsystems laboratory, Rue Jaquet Droz 1, 2000 Neuchatel (Switzerland)

    2009-08-01

    Liquids have fascinated generations of scientists and engineers. Since ancient Greece, the perfect natural shape of liquids has been used to create optical systems. Nowadays, the natural shape of liquid is used in the fabrication of microlens arrays that rely on the melting of glass or photoresist to generate high quality lenses. However shrinkage normally associated to the liquid to solid phase transition will affect the initial shape and quality of the liquid structure. In this contribution, a novel fabrication technique that enables the encapsulation and replication of liquid templates without affecting their natural shape is presented. The SOLID (SOlid on LIquid Deposition) process allows for a transparent solid film to be deposited and grown onto a liquid template (droplet, film, line) in a way that the liquid shapes the overgrowing solid layer. The resulting configuration of the SOLID devices is chemically and mechanically stable and is the base of a huge variety of new micro-nano systems in the field of microfluidics, biomedical devices and micro-optics among others. The SOLID process enables in a one step process the encapsulation of liquid microlenses, fluidics channels, drug reservoir or any naturally driven liquid structure. The phenomenon and solid-liquid interface resulting from the SOLID process is new and still unexploited. The solid layer used for the SOLID process chosen in this paper is poly-para-xylylene called Parylene, a transparent biocompatible polymer with excellent mechanical and chemical properties. Moreover, as the solid layer is growing over a liquid template, atomically smooth surfaces channels can be obtained. The polymerization of Parylene does not exert stress and does not change the shape of the liquid; this latter aspect is particularly interesting for manufacturing naturally driven liquid structures. In this paper the authors explore the limits of this new method by testing different designs of SOLID encapsulated structures and

  9. Structurally stabilized organosilane-templated thermostable mesoporous titania.

    Science.gov (United States)

    Amoli, Vipin; Tiwari, Rashmi; Dutta, Arghya; Bhaumik, Asim; Sinha, Anil Kumar

    2014-01-13

    Structurally thermostable mesoporous anatase TiO2 (m-TiO2) nanoparticles, uniquely decorated with atomically dispersed SiO2, is reported for the first time. The inorganic Si portion of the novel organosilane template, used as a mesopores-directing agent, is found to be incorporated in the pore walls of the titania aggregates, mainly as isolated sites. This is evident by transmission electron microscopy and high-angle annular dark field scanning transmission electron microscopy, combined with electron dispersive X-ray spectroscopy. This type of unique structure provides exceptional stability to this new material against thermal collapse of the mesoporous structure, which is reflected in its high surface area (the highest known for anatase titania), even after high-temperature (550 °C) calcination. Control of crystallite size, pore diameter, and surface area is achieved by varying the molar ratios of the titanium precursor and the template during synthesis. These mesoporous materials retain their porosity and high surface area after template removal and further NaOH/HCl treatment to remove silica. We investigate their performance for dye-sensitized solar cells (DSSCs) with bilayer TiO2 electrodes, which are prepared by applying a coating of m-TiO2 onto a commercial titania (P25) film. The high surface area of the upper mesoporous layer in the P25-m-TiO2 DSSC significantly increases the dye loading ability of the photoanode. The photocurrent and fill factor for the DSSC with the bilayer TiO2 electrode are greatly improved. The large increase in photocurrent current (ca. 56%) in the P25-m-TiO2 DSSC is believed to play a significant role in achieving a remarkable increase in the photovoltaic efficiency (60%) of the device, compared to DSSCs with a monolayer of P25 as the electrode. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Transcript-RNA-templated DNA recombination and repair.

    Science.gov (United States)

    Keskin, Havva; Shen, Ying; Huang, Fei; Patel, Mikir; Yang, Taehwan; Ashley, Katie; Mazin, Alexander V; Storici, Francesca

    2014-11-20

    Homologous recombination is a molecular process that has multiple important roles in DNA metabolism, both for DNA repair and genetic variation in all forms of life. Generally, homologous recombination involves the exchange of genetic information between two identical or nearly identical DNA molecules; however, homologous recombination can also occur between RNA molecules, as shown for RNA viruses. Previous research showed that synthetic RNA oligonucleotides can act as templates for DNA double-strand break (DSB) repair in yeast and human cells, and artificial long RNA templates injected in ciliate cells can guide genomic rearrangements. Here we report that endogenous transcript RNA mediates homologous recombination with chromosomal DNA in yeast Saccharomyces cerevisiae. We developed a system to detect the events of homologous recombination initiated by transcript RNA following the repair of a chromosomal DSB occurring either in a homologous but remote locus, or in the same transcript-generating locus in reverse-transcription-defective yeast strains. We found that RNA-DNA recombination is blocked by ribonucleases H1 and H2. In the presence of H-type ribonucleases, DSB repair proceeds through a complementary DNA intermediate, whereas in their absence, it proceeds directly through RNA. The proximity of the transcript to its chromosomal DNA partner in the same locus facilitates Rad52-driven homologous recombination during DSB repair. We demonstrate that yeast and human Rad52 proteins efficiently catalyse annealing of RNA to a DSB-like DNA end in vitro. Our results reveal a novel mechanism of homologous recombination and DNA repair in which transcript RNA is used as a template for DSB repair. Thus, considering the abundance of RNA transcripts in cells, RNA may have a marked impact on genomic stability and plasticity.

  11. Salt-free vesicle-phases and their template effect

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Researches on the construction, structure, and formation of vesicles formed from surfactants have attracted great attention from colloid and interface chemists. The vesicles formed from salt-free cationic-anionic surfactant systems are very different from those with excess salts, having many particular properties. In this paper, we introduce the properties of vesicles prepared from salt-free surfactant systems, according to our own results, especially the vesicles formed from surfactants with divalent metal ions as counterions in aqueous solutions and room temperature ionic liquids. Moreover, the primary results on template effect of the metal-ligand vesicles have also been summarized.

  12. Synthesis of Biocompatible Hydroxyapatite Using Chitosan Oligosaccharide as a Template

    Directory of Open Access Journals (Sweden)

    Jinyu Wang

    2015-11-01

    Full Text Available In this study, a novel biocompatible hydroxyapatite (HA was synthesized by using chitosan oligosaccharide (COS as a template. These HA samples were studied by Fourier transform infrared (FTIR spectroscopy, X-ray diffraction (XRD, X-ray photoelectron spectroscopy (XPS, and transmission electron microscopy (TEM. The biocompatibility of HA samples was evaluated via cell viability, cell morphology and alkaline phosphatase staining of MG-63 cell lines. The results show that HA synthesized in the presence of COS was favorable to proliferation and osteogenic differentiation of MG-63 cells. These hydroxyapatites are potentially attractive biomaterials for bone tissue engineering applications.

  13. DNA-templated three-branched nanostructures for nanoelectronic devices.

    Science.gov (United States)

    Becerril, Héctor A; Stoltenberg, Randall M; Wheeler, Dean R; Davis, Robert C; Harb, John N; Woolley, Adam T

    2005-03-09

    Three-branched DNA molecules have been designed and assembled from oligonucleotide components. These nucleic acid constructs contain double- and single-stranded regions that control the hybridization behavior of the assembly. Specific localization of a single streptavidin molecule at the center of the DNA complex has been investigated as a model system for the directed placement of nanostructures. Highly selective silver and copper metallization of the DNA template has also been characterized. Specific hybridization of these DNA complexes to oligonucleotide-coupled nanostructures followed by metallization should provide a bottom-up self-assembly route for the fabrication and characterization of discrete three-terminal nanodevices.

  14. Emissive nanotubes from templated self-assembly of small molecules

    Science.gov (United States)

    Tseng, Kuo-Pi; Tsai, Yu-Tang; Shyue, Jing-Jong; Raffy, Guillaume; Del Guerzo, André; Wong, Ken-Tsung; Bassani, Dario M.

    2017-09-01

    We report the use of supramolecular interactions to promote the AAO-templated formation of emissive nanotubes based on small organic molecules bearing complementary hydrogen-bonding sites. Nanotubes emitting blue, green, and red light were obtained using appropriate chromophores, whereas a mixture of blue and green chromophores afforded nanotubes emitting white light. Further characterization revealed that the emission from the nanotubes is polarized, indicating a preferential orientation of the chromophores. Aqueous dispersions of nanotubes showed that scrambling of the chromophores is minimal, and that it is possible to prepare samples in which many nanotubes of different colors are present in close proximity.

  15. SYMBOL-RATE ESTIMATION BASED ON TEMPLATE MATCHING RULES

    Institute of Scientific and Technical Information of China (English)

    Ren Chunhui; Wei Ping; Xiao Xianci

    2006-01-01

    For non-cooperative communication, the symbol-rate estimation of digital communication signal is an important problem to be solved. In this letter, A new algorithm for the symbol-rate estimation of single-tone digitally modulated signal (i.e. MPSK/QAM) is proposed. Firstly a section from the received signal is cut as the template, and then the signal is matched sectionwise by making use of the signal selfsimilarity. So a signal containing the information of symbol jumping is got, and the symbol-rate can be estimated by DFT (Discrete Fourier Transformation). The validity of the new method has been verified by experiments.

  16. Template-Based Geometric Simulation of Flexible Frameworks

    Science.gov (United States)

    Wells, Stephen A.; Sartbaeva, Asel

    2012-01-01

    Specialised modelling and simulation methods implementing simplified physical models are valuable generators of insight. Template-based geometric simulation is a specialised method for modelling flexible framework structures made up of rigid units. We review the background, development and implementation of the method, and its applications to the study of framework materials such as zeolites and perovskites. The “flexibility window” property of zeolite frameworks is a particularly significant discovery made using geometric simulation. Software implementing geometric simulation of framework materials, “GASP”, is freely available to researchers. PMID:28817055

  17. Graphene templated Directional Growth of an Inorganic Nanowire

    Science.gov (United States)

    2015-03-23

    defects2,11,13–17. First, the Raman spectra of graphene before and after nanowire synthesis (Supplementary Fig. 9a,b) maintain very low D peaks, indicating that...the graphene is of high quality and measurable defects are not introduced during the nano- wire synthesis process. Second, atomic-resolution TEM...As also shown by the synthesis of new organic crystals on graphene5,7,8, this result suggests the possi- bility of using graphene as a template for

  18. Acoustic transient classification with a template correlation processor.

    Science.gov (United States)

    Edwards, R T

    1999-10-01

    I present an architecture for acoustic pattern classification using trinary-trinary template correlation. In spite of its computational simplicity, the algorithm and architecture represent a method which greatly reduces bandwidth of the input, storage requirements of the classifier memory, and power consumption of the system without compromising classification accuracy. The linear system should be amenable to training using recently-developed methods such as Independent Component Analysis (ICA), and we predict that behavior will be qualitatively similar to that of structures in the auditory cortex.

  19. Controlling growth of aligned carbon nanotubes from porous silicon templates

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Fabricating well-aligned carbon nanotubes, especially, on a silicon substrate is very important for their applications. In this paper, an aligned carbon nanotube array has been prepared by pyrolysis of hydrocarbons catalyzed by nickel nanoparticles embedded in porous silicon (PS) templates. High-magnification transmission electron microscopy images confirm that the nanotubes are well graphitized. The PS substrates with pore sizes between 10 and 100 nm play a control role on the growth of carbon nanotubes and the diameters of the tubes increase with the enlargement of the pores of the substrates. However, such a control role cannot be found in the macro-PS substrates.

  20. Supramolecular-templated synthesis of mesoporous silica-zirconia nanocomposite

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Mesoporous SiO2-ZrO2 nanocomposite was successfully prepared by using supramolecular triblock copolymer as the template through evaporation-induced self-assembly approach. The textural and structural properties were characterized by X-ray diffraction, nitrogen adsorption analysis, and transmission electron microscope.Comparison between pure mesoporous silica and mesoporous silica-zirconia nanocomposite was also presented in this work. The surface area, pore size, and pore volume decreased as the Zr doping in the mesoporous silica framework. But the obtained nanocomposite maintained the cubic Im3m-type mesoporous structure.

  1. DNA origami as a nanoscale template for protein assembly

    Energy Technology Data Exchange (ETDEWEB)

    Kuzyk, Anton; Laitinen, Kimmo T [Nanoscience Center, Department of Physics, University of Jyvaeskylae, PO Box 35, FIN-40014 (Finland); Toermae, Paeivi [Department of Applied Physics, Helsinki University of Technology, PO Box 5100, FIN-02015 (Finland)], E-mail: paivi.torma@hut.fi

    2009-06-10

    We describe two general approaches to the utilization of DNA origami structures for the assembly of materials. In one approach, DNA origami is used as a prefabricated template for subsequent assembly of materials. In the other, materials are assembled simultaneously with the DNA origami, i.e. the DNA origami technique is used to drive the assembly of materials. Fabrication of complex protein structures is demonstrated by these two approaches. The latter approach has the potential to be extended to the assembly of multiple materials with single attachment chemistry.

  2. Stampless fabrication of sheet bars using disposable templates

    Science.gov (United States)

    Smolentsev, V. P.; Safonov, S. V.; Smolentsev, E. V.; Fedonin, O. N.

    2016-04-01

    The article is devoted to the new method of small-scale fabrication of sheet bars. The procedure is performed by using disposable overlay templates, or those associated with a sheet, which parameters are obtained directly from the drawing. The proposed method used as a substitution of die cutting enables to intensify the preparatory technological process, which is particularly effective when launching the market-oriented items into production. It significantly increases the competitiveness of mechanical engineering and creates the conditions for technical support of present-day flexible production systems.

  3. Abnormalities Detection in Digital Mammography Using Template Matching

    Directory of Open Access Journals (Sweden)

    Ahmed M. Farrag

    2016-02-01

    Full Text Available Breast cancer affects 1 in 8 women in the United States. Early detection and diagnosis is key to recovery. Computer-Aided Detection (CAD of breast cancer helps decrease morbidity and mortality rates. In this study we apply Template Matching as a method for breast cancer detection to a novel data set comprised of mammograms annotated according to ground truth. Performance is evaluated in terms of Area Under the Receiver Operator Characteristic Curve (Area Under ROC and Free-response ROC.

  4. Design for CNN Templates with Performance of Global Connectivity Detection

    Institute of Scientific and Technical Information of China (English)

    LIU Jin-Zhu; MIN Le-Quan

    2004-01-01

    The cellular neural/nonlinear network (CNN) is a powerful tool for image and video signal processing,robotic and biological visions. This paper discusses a general method for designing template of the global connectivity detection (GCD) CNN, which provides parameter inequalities for determining parameter intervals for implementing the corresponding functions. The GCD CNN has stronger ability and faster rate for determining global connectivity in binary patterns than the GCD CNN proposed by Zarandy. An example for detecting the connectivity in complex patterns is given.

  5. Template learning of cellular neural network using genetic programming.

    Science.gov (United States)

    Radwan, Elsayed; Tazaki, Eiichiro

    2004-08-01

    A new learning algorithm for space invariant Uncoupled Cellular Neural Network is introduced. Learning is formulated as an optimization problem. Genetic Programming has been selected for creating new knowledge because they allow the system to find new rules both near to good ones and far from them, looking for unknown good control actions. According to the lattice Cellular Neural Network architecture, Genetic Programming will be used in deriving the Cloning Template. Exploration of any stable domain is possible by the current approach. Details of the algorithm are discussed and several application results are shown.

  6. Light-assisted templated self assembly using photonic crystal slabs.

    Science.gov (United States)

    Mejia, Camilo A; Dutt, Avik; Povinelli, Michelle L

    2011-06-06

    We explore a technique which we term light-assisted templated self-assembly. We calculate the optical forces on colloidal particles over a photonic crystal slab. We show that exciting a guided resonance mode of the slab yields a resonantly-enhanced, attractive optical force. We calculate the lateral optical forces above the slab and predict that stably trapped periodic patterns of particles are dependent on wavelength and polarization. Tuning the wavelength or polarization of the light source may thus allow the formation and reconfiguration of patterns. We expect that this technique may be used to design all-optically reconfigurable photonic devices.

  7. Efficient generation and optimization of stochastic template banks by a neighboring cell algorithm

    CERN Document Server

    Fehrmann, Henning

    2014-01-01

    Placing signal templates (grid points) as efficiently as possible to cover a multi-dimensional parameter space is crucial in computing-intensive matched-filtering searches for gravitational waves, but also in similar searches in other fields of astronomy. To generate efficient coverings of arbitrary parameter spaces, stochastic template banks have been advocated, where templates are placed at random while rejecting those too close to others. However, in this simple scheme, for each new random point its distance to every template in the existing bank is computed. This rapidly increasing number of distance computations can render the acceptance of new templates computationally prohibitive, particularly for wide parameter spaces or in large dimensions. This work presents a neighboring cell algorithm that can dramatically improve the efficiency of constructing a stochastic template bank. By dividing the parameter space into sub-volumes (cells), for an arbitrary point an efficient hashing technique is exploited to...

  8. Assessing the applicability of template-based protein docking in the twilight zone.

    Science.gov (United States)

    Negroni, Jacopo; Mosca, Roberto; Aloy, Patrick

    2014-09-02

    The structural modeling of protein interactions in the absence of close homologous templates is a challenging task. Recently, template-based docking methods have emerged to exploit local structural similarities to help ab-initio protocols provide reliable 3D models for protein interactions. In this work, we critically assess the performance of template-based docking in the twilight zone. Our results show that, while it is possible to find templates for nearly all known interactions, the quality of the obtained models is rather limited. We can increase the precision of the models at expenses of coverage, but it drastically reduces the potential applicability of the method, as illustrated by the whole-interactome modeling of nine organisms. Template-based docking is likely to play an important role in the structural characterization of the interaction space, but we still need to improve the repertoire of structural templates onto which we can reliably model protein complexes.

  9. Template security analysis of multimodal biometric frameworks based on fingerprint and hand geometry

    Directory of Open Access Journals (Sweden)

    Arvind Selwal

    2016-09-01

    Full Text Available Biometric systems are automatic tools used to provide authentication during various applications of modern computing. In this work, three different design frameworks for multimodal biometric systems based on fingerprint and hand geometry modalities are proposed. An analysis is also presented to diagnose various types of template security issues in the proposed system. Fuzzy analytic hierarchy process (FAHP is applied with five decision parameters on all the designs and framework 1 is found to be better in terms of template data security, templates fusion and computational efficiency. It is noticed that template data security before storage in database is a challenging task. An important observation is that a template may be secured at feature fusion level and an indexing technique may be used to improve the size of secured templates.

  10. Reducing Individual Variation for fMRI Studies in Children by Minimizing Template Related Errors.

    Directory of Open Access Journals (Sweden)

    Jian Weng

    Full Text Available Spatial normalization is an essential process for group comparisons in functional MRI studies. In practice, there is a risk of normalization errors particularly in studies involving children, seniors or diseased populations and in regions with high individual variation. One way to minimize normalization errors is to create a study-specific template based on a large sample size. However, studies with a large sample size are not always feasible, particularly for children studies. The performance of templates with a small sample size has not been evaluated in fMRI studies in children. In the current study, this issue was encountered in a working memory task with 29 children in two groups. We compared the performance of different templates: a study-specific template created by the experimental population, a Chinese children template and the widely used adult MNI template. We observed distinct differences in the right orbitofrontal region among the three templates in between-group comparisons. The study-specific template and the Chinese children template were more sensitive for the detection of between-group differences in the orbitofrontal cortex than the MNI template. Proper templates could effectively reduce individual variation. Further analysis revealed a correlation between the BOLD contrast size and the norm index of the affine transformation matrix, i.e., the SFN, which characterizes the difference between a template and a native image and differs significantly across subjects. Thereby, we proposed and tested another method to reduce individual variation that included the SFN as a covariate in group-wise statistics. This correction exhibits outstanding performance in enhancing detection power in group-level tests. A training effect of abacus-based mental calculation was also demonstrated, with significantly elevated activation in the right orbitofrontal region that correlated with behavioral response time across subjects in the trained group.

  11. Accuracy of a Simple Digital Templating in Primary Uncemented Total Hip Arthroplasty

    Institute of Scientific and Technical Information of China (English)

    Hai-bo Si; Yi Zeng; Fei Cao; Fu-xing Pei; Bin Shen

    2015-01-01

    Objective To introduce a simple preoperative digital templating in uncemented total hip arthroplasty (THA) and to determine its accuracy for preoperative size selection of the prostheses. Methods A prospective study of digital planned THAs was performed on 90 hips with different types of prostheses from August 2013 to Angust 2014. The plastic templates of different types of prostheses were scanned for desired digital templating and the scanned images were then processed to the transparent, digital templates using Photoshop software. We calibrated the scales of the digital templates with the preoperative radiographs, and then selected the right size of the component. The preoperatively digital planned component sizes were compared to the actual sizes used in the operation, as well as the preoperatively traditional planned sizes. Results In either cup or stem templating, no difference was found among the groups with different types of prostheses, and the accuracy of digital templating was statistically higher than traditional templating. In cup templating, digital planned and implanted cup sizes were identical in 43.33% of the cases, 78.89% of the cup sizes were predicted within 1 size (± 2mm) and 95.56% were predicted within 2 sizes (±4 mm), all significantly higher than the results of traditional planned sizes (30.00%,P=0.044; 61.11%,P=0.007; 82.22%,P=0.004). The exact femoral stem size was predicted in 40.00% of cases using the digital templating, 84.44% of stem sizes were predicted within 1 size, and 93.33% within 2 sizes, better than using traditional templating (25.56%,P=0.028; 53.33%,P<0.001; 77.77%,P=0.003). Conclusion This simple digital preoperative templating is an accurate and reproducible process to preoperatively predict the implant size of uncemented THA.

  12. Quality Test Template toward Multi-user Access Control of Internet-Based System

    Directory of Open Access Journals (Sweden)

    Nan Nie

    2011-06-01

    Full Text Available Aiming at three kinds of Internet-based system quality problems, which is performance, liability and security, the paper proposes a kind of test template during multi-user login and resource access control, which includes test requirement, login script, role-resource correlating and mutation test technique. Some Internet-based systems are tested and diagnosed by automation test technique of test template. At last, system quality can be verified and improved through the realization mechanism of test template.

  13. Content Analysis of Reporting Templates and Free-Text Radiology Reports

    OpenAIRE

    Hong, Yi; Kahn, Charles E.

    2013-01-01

    The Radiological Society of North America (RSNA) has developed a set of templates for structured reporting of radiology results. To measure how much of the content of conventional narrative (“free-text”) reports is covered by the concepts included in the RSNA reporting templates, we selected five reporting templates that represented a variety of imaging modalities and organ systems. From a sample of 8,275 consecutive, de-identified radiology reports from an academic medical center, we identif...

  14. An Efficient Way of Calculating Rotated Template Set Operators for Parallel Image Processing

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This paper presents a novel method of calculating the rotated template set operators. Having defined a rotated ring model, the author proposes an efficient way of executing the rotated template set operators, which uses the rotated ring model and a fast cyclic convolution algorithm from the Number Theoretic Transform. The author showns that a class of rotated templates can be modelled as rotated rings and computed efficiently by the fast algorithm with much fewer multiplies than the normal approach in the worse cases.

  15. Preoperative sterilization and disinfection of drill guide templates.

    Science.gov (United States)

    Sennhenn-Kirchner, Sabine; Weustermann, Sascha; Mergeryan, Hamparsum; Jacobs, Hans Georg; Borg-von Zepelin, Margarete; Kirchner, Bernhard

    2008-06-01

    The aim of the in vitro study was to evaluate the decontamination potential of common antiseptic solutions for heat-sensitive implantological drill guide templates. One hundred implantologists were evaluated on the basis of a questionnaire for their measures of disinfection. On the basis of these results, 80% alcohol, Octenidine 0.1%, and Chlorhexidine 0.12% were tested in an in vitro model for their decontamination efficacy for heat-sensitive plastic material infected with Pseudomonas aeruginosa, Acinetobacter baumannii, Enterococcus faecalis, Enterococcus faecium, Staphylococcus aureus, Enterobacter cloacae, Escherichia coli, and Candida albicans. The microorganisms were selected on the basis of results of environmental testing of dental laboratories. The results of the questionnaire revealed that Chlorhexidine was used by 30%, 80% alcohol by 23%, and Octenidine by 7% of the dentists. Using the in vitro model, with the exception of S. aureus, Chlorhexidine was not able to completely eliminate the microorganisms after 15 min of application. In contrast, the treatment with Octenidine revealed no further growth of the tested microorganisms after that time. The 80% alcohol was more efficient. No growth of microorganisms could be detected in any of the tests after 5 min of incubation. On the basis of our results and due to the fact that suitable installations for sterilization were hardly used by the dental practitioners, the disinfection of templates should be preferentially performed with 80% alcohol or Octenidine using an incubation time of 15 min with ultrasonication.

  16. Templated Control of Au nanospheres in Silica Nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Tringe, J W; Vanamu, G; Zaidi, S H

    2007-03-15

    The formation of regularly-spaced metal nanostructures in selectively-placed insulating nanowires is an important step toward realization of a wide range of nano-scale electronic and opto-electronic devices. Here we report templated synthesis of Au nanospheres embedded in silica nanowires, with nanospheres consistently spaced with a period equal to three times their diameter. Under appropriate conditions, nanowires form exclusively on Si nanostructures because of enhanced local oxidation and reduced melting temperatures relative to templates with larger dimensions. We explain the spacing of the nanospheres with a general model based on a vapor-liquid-solid mechanism, in which an Au/Si alloy dendrite remains liquid in the nanotube until a critical Si concentration is achieved locally by silicon oxide-generated nanowire growth. Additional Si oxidation then locally reduces the surface energy of the Au-rich alloy by creating a new surface with minimum area inside of the nanotube. The isolated liquid domain subsequently evolves to become an Au nanosphere, and the process is repeated.

  17. Control of Perovskite Crystal Growth by Methylammonium Lead Chloride Templating.

    Science.gov (United States)

    Binek, Andreas; Grill, Irene; Huber, Niklas; Peters, Kristina; Hufnagel, Alexander G; Handloser, Matthias; Docampo, Pablo; Hartschuh, Achim; Bein, Thomas

    2016-04-20

    State-of-the-art solar cells based on methylammonium lead iodide (MAPbI3 ) now reach efficiencies over 20 %. This fast improvement was possible with intensive research in perovskite processing. In particular, chloride-based precursors are known to have a positive influence on the crystallization of the perovskite. Here, we used a combination of in-situ X-ray diffraction and charge-transport measurements to understand the influence of chloride during perovskite crystallization in planar heterojunction solar cells. We show that MAPbCl3 crystallizes directly after the deposition of the starting solution and acts as a template for the formation of MAPbI3 . Additionally, we show that the charge-carrier mobility doubles by extending the time for the template formation. Our results give a deeper understanding of the influence of chloride in the synthesis of MAPbI3 and illustrate the importance of carefully controlling crystallization for reproducible, high-efficiency solar cells.

  18. Template-based education toolkit for mobile platforms

    Science.gov (United States)

    Golagani, Santosh Chandana; Esfahanian, Moosa; Akopian, David

    2012-02-01

    Nowadays mobile phones are the most widely used portable devices which evolve very fast adding new features and improving user experiences. The latest generation of hand-held devices called smartphones is equipped with superior memory, cameras and rich multimedia features, empowering people to use their mobile phones not only as a communication tool but also for entertainment purposes. With many young students showing interest in learning mobile application development one should introduce novel learning methods which may adapt to fast technology changes and introduce students to application development. Mobile phones become a common device, and engineering community incorporates phones in various solutions. Overcoming the limitations of conventional undergraduate electrical engineering (EE) education this paper explores the concept of template-based based education in mobile phone programming. The concept is based on developing small exercise templates which students can manipulate and revise for quick hands-on introduction to the application development and integration. Android platform is used as a popular open source environment for application development. The exercises relate to image processing topics typically studied by many students. The goal is to enable conventional course enhancements by incorporating in them short hands-on learning modules.

  19. Efficacy of the use of templating in total hip arthroplasty

    Directory of Open Access Journals (Sweden)

    Fábio Stuchi Devito

    2013-04-01

    Full Text Available OBJECTIVE: The aim was to evaluate the effectiveness of traditional preoperative planning with the use of templating. METHOD: Forty-three anteroposterior X-rays were analyzed by three experienced surgeons (A, B, C and compared. Cohen's Kappa concordance test and weighted Kappa indexes using quadratic weighting were used for statistical analysis with a confidence interval of 95%. RESULTS: The preoperative evaluations were divided into the analysis of the sizes of the acetabular cup, stem and plug of the distal femoral canal. Surgeon A obtained a moderate agreement in relation to the acetabular component and substantial agreements in relation to the stem and plug. Surgeon B had moderate agreement in relation to both the acetabulum and the stem and substantial agreement in relation to the plug. Surgeon C obtained moderate agreement in relation to the analysis of the acetabulum and the plug and substantial agreement for the stem. The intraobserver agreement test demonstrated a prevalence of slight agreement in relation to the acetabulum and substantial agreement in relation to the stem and to the plug. CONCLUSION: Templating used in preoperative planning proved effective; however, there was a prevalence of slight and moderate agreement in relation to the size of the acetabular component.

  20. Template-Cut: A Pattern-Based Segmentation Paradigm

    CERN Document Server

    Egger, Jan; Nimsky, Christopher; Kapur, Tina

    2012-01-01

    We present a scale-invariant, template-based segmentation paradigm that sets up a graph and performs a graph cut to separate an object from the background. Typically graph-based schemes distribute the nodes of the graph uniformly and equidistantly on the image, and use a regularizer to bias the cut towards a particular shape. The strategy of uniform and equidistant nodes does not allow the cut to prefer more complex structures, especially when areas of the object are indistinguishable from the background. We propose a solution by introducing the concept of a "template shape" of the target object in which the nodes are sampled non-uniformly and non-equidistantly on the image. We evaluate it on 2D-images where the object's textures and backgrounds are similar, and large areas of the object have the same gray level appearance as the background. We also evaluate it in 3D on 60 brain tumor datasets for neurosurgical planning purposes.

  1. Microscopic and magnetic properties of template assisted electrodeposited iron nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Irshad, M. I., E-mail: imrancssp@gmail.com; Mohamed, N. M., E-mail: noranimuti-mohamed@petronas.com.my; Yar, A., E-mail: asfandyarhargan@gmail.com [Department of Fundamental & Applied Sciences, Universiti Teknologi PETRONAS, 31750 PERAK (Malaysia); Ahmad, F., E-mail: faizahmad@petronas.com.my; Abdullah, M. Z., E-mail: zaki-abdullah@petronas.com.my [Department of Mechanical Engineering, Universiti Teknologi PETRONAS, 31750 PERAK (Malaysia)

    2015-07-22

    Nanowires of magnetic materials such as Iron, nickel, cobalt, and alloys of them are one of the most widely investigated structures because of their possible applications in high density magnetic recording media, sensor elements, and building blocks in biological transport systems. In this work, Iron nanowires have been prepared by electrodeposition technique using Anodized Aluminium Oxide (AAO) templates. The electrolyte used consisted of FeSO{sub 4.}6H{sub 2}O buffered with H{sub 3}BO{sub 3} and acidized by dilute H{sub 2}SO{sub 4}. FESEM analysis shows that the asdeposited nanowires are parallel to one another and have high aspect ratio with a reasonably high pore-filing factor. To fabricate the working electrode, a thin film of copper (∼ 220 nm thick) was coated on back side of AAO template by e-beam evaporation system to create electrical contact with the external circuit. The TEM results show that electrodeposited nanowires have diameter around 100 nm and are polycrystalline in structure. Magnetic properties show the existence of anisotropy for in and out of plane configuration. These nanowires have potential applications in magnetic data storage, catalysis and magnetic sensor applications.

  2. The template choice decision in meiosis: is the sister important?

    Science.gov (United States)

    Pradillo, Mónica; Santos, Juan L

    2011-10-01

    Recombination between homologous chromosomes is crucial to ensure their proper segregation during meiosis. This is achieved by regulating the choice of recombination template. In mitotic cells, double-strand break repair with the sister chromatid appears to be preferred, whereas interhomolog recombination is favoured during meiosis. However, in the last year, several studies in yeast have shown the importance of the meiotic recombination between sister chromatids. Although this thinking seems to be new, evidences for sister chromatid exchange during meiosis were obtained more than 50 years ago in non-model organisms. In this mini-review, we comment briefly on the most recent advances in this hot topic and also describe observations which suggest the existence of inter-sister repair during meiotic recombination. For instance, the behaviour of mammalian XY bivalents and that of trivalents in heterozygotes for chromosomal rearrangements are cited as examples. The "rediscovering" of the requirement for the sister template, although it seems to occur at a low frequency, will probably prompt further investigations in organisms other than yeast to understand the complexity of the partner choice during meiosis.

  3. Templated sequence insertion polymorphisms in the human genome

    Science.gov (United States)

    Onozawa, Masahiro; Aplan, Peter

    2016-11-01

    Templated Sequence Insertion Polymorphism (TSIP) is a recently described form of polymorphism recognized in the human genome, in which a sequence that is templated from a distant genomic region is inserted into the genome, seemingly at random. TSIPs can be grouped into two classes based on nucleotide sequence features at the insertion junctions; Class 1 TSIPs show features of insertions that are mediated via the LINE-1 ORF2 protein, including 1) target-site duplication (TSD), 2) polyadenylation 10-30 nucleotides downstream of a “cryptic” polyadenylation signal, and 3) preference for insertion at a 5’-TTTT/A-3’ sequence. In contrast, class 2 TSIPs show features consistent with repair of a DNA double-strand break via insertion of a DNA “patch” that is derived from a distant genomic region. Survey of a large number of normal human volunteers demonstrates that most individuals have 25-30 TSIPs, and that these TSIPs track with specific geographic regions. Similar to other forms of human polymorphism, we suspect that these TSIPs may be important for the generation of human diversity and genetic diseases.

  4. A color based face detection system using multiple templates

    Institute of Scientific and Technical Information of China (English)

    王涛; 卜佳俊; 陈纯

    2003-01-01

    A color based system using multiple templates was developed and implemented for detecting human faces in color images. The algorithm consists of three image processing steps. The first step is human skin color statistics. Then it separates skin regions from non-skin regions. After that, it locates the frontal human face(s) within the skin regions. In the first step, 250 skin samples from persons of different ethnicities are used to determine the color distribution of human skin in chromatic color space in order to get a chroma chart showing likelihoods of skin colors. This chroma chart is used to generate, from the original color image, a gray scale image whose gray value at a pixel shows its likelihood of representing the skin. The algorithm uses an adaptive thresholding process to achieve the optimal threshold value for dividing the gray scale image into separate skin regions from non skin regions. Finally, multiple face templates matching is used to determine if a given skin region represents a frontal human face or not. Test of the system with more than 400 color images showed that the resulting detection rate was 83%, which is better than most color-based face detection systems. The average speed for face detection is 0.8 second/image (400×300 pixels) on a Pentium 3 (800MHz) PC.

  5. A color based face detection system using multiple templates

    Institute of Scientific and Technical Information of China (English)

    王涛; 卜佳酸; 陈纯

    2003-01-01

    A color based system using multiple templates was developed and implemented for detecting hu-man faces in color images.The algorithm comsists of three image processing steps.The first step is human skin color statistics.Then it separates skin regions from non-skin regions.After that,it locates the frontal human face(s) within the skin regions.In the first step,250 skin samples from persons of different ethnicities are used to determine the color distribution of human skin in chromatic color space in order to get a chroma chart showing likelihoods of skin colors.This chroma chart is used to generate,from the original color image,a gray scale image whose gray value at a pixel shows its likelihood of representing the shin,The algorithm uses an adaptive thresholding process to achieve the optimal threshold value for dividing the gray scale image into sep-arate skin regions from non skin regions.Finally,multiple face templates matching is used to determine if a given skin region represents a frontal human face or not.Test of the system with more than 400 color images showed that the resulting detection rate was 83%,which is better than most colou-based face detection sys-tems.The average speed for face detection is 0.8 second/image(400×300pixels) on a Pentium 3(800MHz) PC.

  6. K-corrections and spectral templates of Type Ia supernovae

    Energy Technology Data Exchange (ETDEWEB)

    Nugent, Peter E; Hsiao, E.Y.; Conley, A.; Howell, D.A.; Sullivan, M.; Pritchet, C.J.; Carlberg, R.G.; Nugent, P.E.; Phillips, M.M.

    2007-03-20

    With the advent of large dedicated Type Ia supernova (SN Ia) surveys, K-corrections of SNe Ia and their uncertainties have become especially important in the determination of cosmological parameters. While K-corrections are largely driven by SN Ia broadband colors, it is shown here that the diversity in spectral features of SNe Ia can also be important. For an individual observation, the statistical errors from the inhomogeneity in spectral features range from 0.01 (where the observed and rest-frame filters are aligned) to 0.04 (where the observed and rest-frame filters are misaligned). To minimize the systematic errors caused by an assumed SN Ia spectral energy distribution (SED), we outline a prescription for deriving a mean spectral template time series that incorporates a large and heterogeneous sample of observed spectra. We then remove the effects of broadband colors and measure the remaining uncertainties in the K-corrections associated with the diversity in spectral features. Finally, we present a template spectroscopic sequence near maximum light for further improvement on the K-correction estimate. A library of ~;;600 observed spectra of ~;;100 SNe Ia from heterogeneous sources is used for the analysis.

  7. Peptide-templating dye-sensitized solar cells.

    Science.gov (United States)

    Han, Tae Hee; Moon, Hyoung-Seok; Hwang, Jin Ok; Seok, Sang Il; Im, Sang Hyuk; Kim, Sang Ouk

    2010-05-07

    A hollow TiO(2) nanoribbon network electrode for dye-sensitized solar cells (DSSC) was fabricated by a biotemplating process combining peptide self-assembly and atomic layer deposition (ALD). An aromatic peptide of diphenylalanine was assembled into a three-dimensional network consisting of highly entangled nanoribbons. A thin TiO(2) layer was deposited at the surface of the peptide template via the ALD process. After the pyrolysis of the peptide template, a highly entangled nanotubular TiO(2) framework was successfully prepared. Evolution of the crystal phase and crystallite size of the TiO(2) nanostructure was exploited by controlling the calcination temperature. Finally, the hollow TiO(2) nanoribbon network electrode was integrated into DSSC devices and their photochemical performances were investigated. Hollow TiO(2) nanoribbon-based DSSCs exhibited a power conversion efficiency of 3.8%, which is comparable to the conventional TiO(2) nanoparticle-based DSSCs (3.5%). Our approach offers a novel pathway for DSSCs consisting of TiO(2) electrodes via biotemplating.

  8. Carbon as a hard template for nano material catalysts

    Institute of Scientific and Technical Information of China (English)

    Kake Zhu; Junming Sun; He Zhang; Jun Liu; Yong Wang

    2012-01-01

    As one of the naturally abundant elements,carbon can present in different molecular structures (allotropes) and thus lead to various physical/chemical properties of carbon-based materials which have found wide applications in a variety of fields including electrochemistry,optical,adsorption and catalysis,etc.On the other hand,its different allotropes also endow carbon-based materials with various morphostructures,which have been recently explored to prepare oxides and zeolites/zeotypes with tailored structures.In this review,we mainly summarize the recent advances in using carbon materials as hard templates to synthesize structural materials.Specifically,we focus on the development in the synthetic strategies,such as endotemplating,exotemplating approaches and using carbon materials as chemical reagents for the synthesis of metal carbides or nitrides,with an emphasis laid on the control of morphostructure.Meanwhile,the applications of the obtained materials will be highlighted,especially,in the field of heterogeneous catalysis where enhanced performances have been achieved with the materials derived from carbon-templated methods.

  9. DNA template dependent accuracy variation of nucleotide selection in transcription.

    Science.gov (United States)

    Mellenius, Harriet; Ehrenberg, Måns

    2015-01-01

    It has been commonly assumed that the effect of erroneous transcription of DNA genes into messenger RNAs on peptide sequence errors are masked by much more frequent errors of mRNA translation to protein. We present a theoretical model of transcriptional accuracy. It uses experimentally estimated standard free energies of double-stranded DNA and RNA/DNA hybrids and predicts a DNA template dependent transcriptional accuracy variation spanning several orders of magnitude. The model also identifies high-error as well a high-accuracy transcription motifs. The source of the large accuracy span is the context dependent variation of the stacking free energy of pairs of correct and incorrect base pairs in the ever moving transcription bubble. Our model predictions have direct experimental support from recent single molecule based identifications of transcriptional errors in the C. elegans transcriptome. Our conclusions challenge the general view that amino acid substitution errors in proteins are mainly caused by translational errors. It suggests instead that transcriptional error hotspots are the dominating source of peptide sequence errors in some DNA template contexts, while mRNA translation is the major cause of protein errors in other contexts.

  10. DNA template dependent accuracy variation of nucleotide selection in transcription.

    Directory of Open Access Journals (Sweden)

    Harriet Mellenius

    Full Text Available It has been commonly assumed that the effect of erroneous transcription of DNA genes into messenger RNAs on peptide sequence errors are masked by much more frequent errors of mRNA translation to protein. We present a theoretical model of transcriptional accuracy. It uses experimentally estimated standard free energies of double-stranded DNA and RNA/DNA hybrids and predicts a DNA template dependent transcriptional accuracy variation spanning several orders of magnitude. The model also identifies high-error as well a high-accuracy transcription motifs. The source of the large accuracy span is the context dependent variation of the stacking free energy of pairs of correct and incorrect base pairs in the ever moving transcription bubble. Our model predictions have direct experimental support from recent single molecule based identifications of transcriptional errors in the C. elegans transcriptome. Our conclusions challenge the general view that amino acid substitution errors in proteins are mainly caused by translational errors. It suggests instead that transcriptional error hotspots are the dominating source of peptide sequence errors in some DNA template contexts, while mRNA translation is the major cause of protein errors in other contexts.

  11. Biosynthesis of amorphous mesoporous aluminophosphates using yeast cells as templates

    Energy Technology Data Exchange (ETDEWEB)

    Sifontes, Ángela B., E-mail: asifonte@ivic.gob.ve [Centro de Química, Instituto Venezolano de Investigaciones Científicas, Apartado 20632, Caracas 1020-A (Venezuela, Bolivarian Republic of); González, Gema [Centro de Ingeniería de Materiales y Nanotecnología, Instituto Venezolano de Investigaciones Científicas, Apartado 20632, Caracas 1020-A (Venezuela, Bolivarian Republic of); Tovar, Leidy M.; Méndez, Franklin J. [Centro de Química, Instituto Venezolano de Investigaciones Científicas, Apartado 20632, Caracas 1020-A (Venezuela, Bolivarian Republic of); Gomes, Maria E. [Centro de Ingeniería de Materiales y Nanotecnología, Instituto Venezolano de Investigaciones Científicas, Apartado 20632, Caracas 1020-A (Venezuela, Bolivarian Republic of); Cañizales, Edgar [Área de Análisis Químico Inorgánico, PDVSA, INTEVEP, Los Teques 1070-A (Venezuela, Bolivarian Republic of); Niño-Vega, Gustavo; Villalobos, Hector [Centro de Microbiología y Biología Celular, Instituto Venezolano de Investigaciones Científicas, Apartado 20632, Caracas 1020-A (Venezuela, Bolivarian Republic of); Brito, Joaquin L. [Centro de Química, Instituto Venezolano de Investigaciones Científicas, Apartado 20632, Caracas 1020-A (Venezuela, Bolivarian Republic of)

    2013-02-15

    Graphical abstract: Display Omitted Highlights: ► Amorphous aluminophosphates can take place using yeast as template. ► A mesoporous material was obtained. ► The specific surface area after calcinations ranged between 176 and 214 m{sup 2} g{sup −1}. -- Abstract: In this study aluminophosphates have been synthesized from aluminum isopropoxide and phosphoric acid solutions using yeast cells as template. The physicochemical characterization was carried out by thermogravimetric analysis; X-ray diffraction; Fourier transform infrared; N{sub 2} adsorption–desorption isotherms; scanning electron microscopy; transmission electron microscopy and potentiometric titration with N-butylamine for determination of: thermal stability; crystalline structure; textural properties; morphology and surface acidity, respectively. The calcined powders consisted of an intimate mixture of amorphous and crystallized AlPO particles with sizes between 23 and 30 nm. The average pore size observed is 13–16 nm and the specific surface area after calcinations (at 650 °C) ranged between 176 and 214 m{sup 2} g{sup −1}.

  12. Fire Protection Engineering Design Brief Template. Hydrogen Refueling Station.

    Energy Technology Data Exchange (ETDEWEB)

    LaFleur, Angela Christine [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Muna, Alice Baca [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Groth, Katrina M. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2015-08-01

    Building a hydrogen infrastructure system is critical to supporting the development of alternate- fuel vehicles. This report provides a methodology for implementing a performance-based design of an outdoor hydrogen refueling station that does not meet specific prescriptive requirements in NFPA 2, The Hydrogen Technologies Code . Performance-based designs are a code-compliant alternative to meeting prescriptive requirements. Compliance is demonstrated by comparing a prescriptive-based fueling station design with a performance-based design approach using Quantitative Risk Assessment (QRA) methods and hydrogen risk assessment tools. This template utilizes the Sandia-developed QRA tool, Hydrogen Risk Analysis Models (HyRAM), which combines reduced-order deterministic models that characterize hydrogen release and flame behavior with probabilistic risk models to quantify risk values. Each project is unique and this template is not intended to account for site-specific characteristics. Instead, example content and a methodology are provided for a representative hydrogen refueling site which can be built upon for new hydrogen applications.

  13. Operating and Maintaining Energy Smart Schools Action Plan Template - All Action Plans

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-07-01

    EnergySmart Schools action plan templates for benchmarking, lighting, HVAC, water heating, building envelope, transformer, plug loads, kitchen equipment, swimming pool, building automation system, other.

  14. Design, Sustainable Synthesis, and Programmed Reactions of Templated N-Heteroaryl-Fused Vinyl Sultams.

    Science.gov (United States)

    Laha, Joydev K; Sharma, Shubhra; Kirar, Seema; Banerjee, Uttam C

    2017-09-15

    A de novo design and synthesis of N-heteroaryl-fused vinyl sultams as templates for programming chemical reactions on vinyl sultam periphery or (hetero)aryl ring is described. The key features include rational designing and sustainable synthesis of the template, customized reactions of vinyl sultams at C═C bond or involving N-S bond cleavage, and reactions on the periphery of the heteroaryl ring for late-stage diversification. The simple, easy access to the template coupled with opportunities for the synthesis of diversely functionalized heterocyles from a single template constitutes a rare study in contemporary organic synthesis.

  15. Influence of solvent polarity and supersaturation on template-induced nucleation of carbamazepine crystal polymorphs

    Science.gov (United States)

    Parambil, Jose V.; Poornachary, Sendhil K.; Tan, Reginald B. H.; Heng, Jerry Y. Y.

    2017-07-01

    Studies on the use of template surfaces to induce heterogeneous crystal nucleation have gained momentum in recent years-with potential applications in selective crystallisation of polymorphs and in the generation of seed crystals in a continuous crystallisation process. In developing a template-assisted solution crystallisation process, the kinetics of homogeneous versus heterogeneous crystal nucleation could be influenced by solute-solvent, solute-template, and solvent-template interactions. In this study, we report the effect of solvents of varying polarity on the nucleation of carbamazepine (CBZ) crystal polymorphs, a model active pharmaceutical ingredient. The experimental results demonstrate that functionalised template surfaces are effective in promoting crystallisation of either the metastable (form II) or stable (form III) polymorphs of CBZ only in moderately (methanol, ethanol, isopropanol) and low polar (toluene) solvents. A solvent with high polarity (acetonitrile) is thought to mask the template effect on heterogeneous nucleation due to strong solute-solvent and solvent-template interactions. The current study highlights that a quality-by-design (QbD) approach-considering the synergistic effects of solute concentration, solvent type, solution temperature, and template surface chemistry on crystal nucleation-is critical to the development of a template-induced crystallisation process.

  16. External and semi-internal controls for PCR amplification of homologous sequences in mixed templates

    DEFF Research Database (Denmark)

    Kalle, Elena; Gulevich, Alexander; Rensing, Christopher Günther T

    2013-01-01

    in a single template assay. Yet, multi-template PCR has been used without appropriate attention to quality control and assay validation, in spite of the fact that such practice diminishes the reliability of results. External and internal amplification controls became obligatory elements of good laboratory...... practice in different PCR assays. We propose the inclusion of an analogous approach as a quality control system for multi-template PCR applications. The amplification controls must take into account the characteristics of multi-template PCR and be able to effectively monitor particular assay performance...

  17. The sidebar template and extraction of invariant feature of calligraphy and painting seal

    Science.gov (United States)

    Hu, Zheng-kun; Bao, Hong; Lou, Hai-tao

    2009-07-01

    The paper propose a novel seal extract method through template matching based on the characteristics of the external contour of the seal image in Chinese Painting and Calligraphy. By analyzing the characteristics of the seal edge, we obtain the priori knowledge of the seal edge, and set up the outline template of the seals, then design a template matching method by computing the distance difference between the outline template and the seal image edge which can extract seal image from Chinese Painting and Calligraphy effectively. This method is proved to have higher extraction rate by experiment results than the traditional image extract methods.

  18. A template bank to search for gravitational waves from inspiralling compact binaries: II. Phenomenological model

    CERN Document Server

    Cokelaer, Thomas

    2007-01-01

    Matched filtering is used to search for gravitational waves emitted by inspiralling compact binaries in data from ground-based interferometers. One of the key aspects of the detection process is the deployment of a set of templates, also called a template bank, to cover the astrophysically interesting region of the parameter space. In a companion paper, we described the template-bank algorithm used in the analysis of LIGO data to search for signals from non-spinning binaries made of neutron star and/or stellar-mass black holes; this template bank is based upon physical template families. In this paper, we describe the phenomenological template bank that was used to search for gravitational waves from non-spinning black hole binaries (from stellar mass formation) in the second, third and fourth LIGO science runs. We briefly explain the design of the bank, whose templates are based on a phenomenological detection template family. We show that this template bank gives matches greater than 95% with the physical t...

  19. External and semi-internal controls for PCR amplification of homologous sequences in mixed templates.

    Science.gov (United States)

    Kalle, Elena; Gulevich, Alexander; Rensing, Christopher

    2013-11-01

    In a mixed template, the presence of homologous target DNA sequences creates environments that almost inevitably give rise to artifacts and biases during PCR. Heteroduplexes, chimeras, and skewed template-to-product ratios are the exclusive attributes of mixed template PCR and never occur in a single template assay. Yet, multi-template PCR has been used without appropriate attention to quality control and assay validation, in spite of the fact that such practice diminishes the reliability of results. External and internal amplification controls became obligatory elements of good laboratory practice in different PCR assays. We propose the inclusion of an analogous approach as a quality control system for multi-template PCR applications. The amplification controls must take into account the characteristics of multi-template PCR and be able to effectively monitor particular assay performance. This study demonstrated the efficiency of a model mixed template as an adequate external amplification control for a particular PCR application. The conditions of multi-template PCR do not allow implementation of a classic internal control; therefore we developed a convenient semi-internal control as an acceptable alternative. In order to evaluate the effects of inhibitors, a model multi-template mix was amplified in a mixture with DNAse-treated sample. Semi-internal control allowed establishment of intervals for robust PCR performance for different samples, thus enabling correct comparison of the samples. The complexity of the external and semi-internal amplification controls must be comparable with the assumed complexity of the samples. We also emphasize that amplification controls should be applied in multi-template PCR regardless of the post-assay method used to analyze products.

  20. Precision feature point tracking method using a drift-correcting template update strategy

    Science.gov (United States)

    Peng, Xiaoming; Ma, Qian; Zhang, Qiheng; Chen, Wufan; Xu, Zhiyong

    2009-02-01

    We present a drift-correcting template update strategy for precisely tracking a feature point in 2D image sequences in this paper. The proposed strategy greatly extends Matthews et al's template tracking strategy [I. Matthews, T. Ishikawa and S. Baker, The template update problem, IEEE Trans. PAMI 26 (2004) 810-815.] by incorporating a robust non-rigid image registration step used in medical imaging. Matthews et al's strategy uses the first template to correct drifts in the current template; however, the drift would still build up if the first template becomes quite different from the current one as the tracking continues. In our strategy the first template is updated timely when it is quite different from the current one, and henceforth the updated first template can be used to correct template drifts in subsequent frames. The method based on the proposed strategy yields sub-pixel accuracy tracking results measured by the commercial software REALVIZ(R) MatchMover(R) Pro 4.0. Our method runs fast on a desktop PC (3.0 GHz Pentium(R) IV CPU, 1GB RAM, Windows(R) XP professional operating system, Microsoft Visual C++ 6.0 (R) programming), using about 0.03 seconds on average to track the feature point in a frame (under the assumption of a general affine transformation model, 61×61 pixels in template size) and when required, less than 0.1 seconds to update the first template. We also propose the architecture for implementing our strategy in parallel.

  1. Preformed template fluctuations promote fibril formation: insights from lattice and all-atom models.

    Science.gov (United States)

    Kouza, Maksim; Co, Nguyen Truong; Nguyen, Phuong H; Kolinski, Andrzej; Li, Mai Suan

    2015-04-14

    Fibril formation resulting from protein misfolding and aggregation is a hallmark of several neurodegenerative diseases such as Alzheimer's and Parkinson's diseases. Despite the fact that the fibril formation process is very slow and thus poses a significant challenge for theoretical and experimental studies, a number of alternative pictures of molecular mechanisms of amyloid fibril formation have been recently proposed. What seems to be common for the majority of the proposed models is that fibril elongation involves the formation of pre-nucleus seeds prior to the creation of a critical nucleus. Once the size of the pre-nucleus seed reaches the critical nucleus size, its thermal fluctuations are expected to be small and the resulting nucleus provides a template for sequential (one-by-one) accommodation of added monomers. The effect of template fluctuations on fibril formation rates has not been explored either experimentally or theoretically so far. In this paper, we make the first attempt at solving this problem by two sets of simulations. To mimic small template fluctuations, in one set, monomers of the preformed template are kept fixed, while in the other set they are allowed to fluctuate. The kinetics of addition of a new peptide onto the template is explored using all-atom simulations with explicit water and the GROMOS96 43a1 force field and simple lattice models. Our result demonstrates that preformed template fluctuations can modulate protein aggregation rates and pathways. The association of a nascent monomer with the template obeys the kinetics partitioning mechanism where the intermediate state occurs in a fraction of routes to the protofibril. It was shown that template immobility greatly increases the time of incorporating a new peptide into the preformed template compared to the fluctuating template case. This observation has also been confirmed by simulation using lattice models and may be invoked to understand the role of template fluctuations in

  2. Computational study of textured ferroelectric polycrystals: Texture development during templated grain growth

    Science.gov (United States)

    Zhou, Jie E.; Yan, Yongke; Priya, Shashank; Wang, Yu U.

    2017-02-01

    Quantitative relationships between processing, microstructure, and properties in textured ferroelectric polycrystals and the underlying responsible mechanisms are investigated by phase field modeling and computer simulation. This study focuses on three important aspects of textured ferroelectric ceramics: (i) grain microstructure evolution during templated grain growth processing, (ii) crystallographic texture development as a function of volume fraction and seed size of the templates, and (iii) dielectric and piezoelectric properties of the obtained template-matrix composites of textured polycrystals. Findings on the first two aspects are presented here, while an accompanying paper of this work reports findings on the third aspect. In this paper, grain microstructure evolution in the polycrystalline matrix with different template volume fractions and seed sizes is simulated. To quantitatively characterize the crystallographic texture development during templated grain growth processing, a numerical algorithm is developed to compute the diffraction peak intensities and Lotgering factor of the simulated polycrystals during grain microstructure evolution. This novel approach provides a direct link between phase field simulation and diffraction experiment. This computational study clarifies the effects of the template volume fraction and template seed size on the final grain microstructure and texture. It is found that, while the degree of crystallographic texture generally increases with increasing template volume fraction, it is the average distance between template seeds that plays an important role. This finding suggests that reducing the template seed size and shortening the seed distance is an effective way to achieve higher texture at a lower template volume fraction, which is highly desired for enhancing the piezoelectric properties of ferroelectric polycrystals. The computational results are compared with complementary experiments, where good agreement is

  3. Preformed template fluctuations promote fibril formation: Insights from lattice and all-atom models

    Energy Technology Data Exchange (ETDEWEB)

    Kouza, Maksim, E-mail: mkouza@chem.uw.edu.pl; Kolinski, Andrzej [Faculty of Chemistry, University of Warsaw, ul. Pasteura 1, 02-093 Warszaw (Poland); Co, Nguyen Truong [Department of Physics, Institute of Technology, National University of HCM City, 268 Ly Thuong Kiet Street, District 10, Ho Chi Minh City (Viet Nam); Institute for Computational Science and Technology, Quang Trung Software City, Tan Chanh Hiep Ward, District 12, Ho Chi Minh City (Viet Nam); Nguyen, Phuong H. [Laboratoire de Biochimie Theorique, UPR 9080 CNRS, IBPC, Universite Paris 7, 13 rue Pierre et Marie Curie, 75005 Paris (France); Li, Mai Suan, E-mail: masli@ifpan.edu.pl [Institute of Physics, Polish Academy of Sciences, Al. Lotnikow 32/46, 02-668 Warsaw (Poland)

    2015-04-14

    Fibril formation resulting from protein misfolding and aggregation is a hallmark of several neurodegenerative diseases such as Alzheimer’s and Parkinson’s diseases. Despite the fact that the fibril formation process is very slow and thus poses a significant challenge for theoretical and experimental studies, a number of alternative pictures of molecular mechanisms of amyloid fibril formation have been recently proposed. What seems to be common for the majority of the proposed models is that fibril elongation involves the formation of pre-nucleus seeds prior to the creation of a critical nucleus. Once the size of the pre-nucleus seed reaches the critical nucleus size, its thermal fluctuations are expected to be small and the resulting nucleus provides a template for sequential (one-by-one) accommodation of added monomers. The effect of template fluctuations on fibril formation rates has not been explored either experimentally or theoretically so far. In this paper, we make the first attempt at solving this problem by two sets of simulations. To mimic small template fluctuations, in one set, monomers of the preformed template are kept fixed, while in the other set they are allowed to fluctuate. The kinetics of addition of a new peptide onto the template is explored using all-atom simulations with explicit water and the GROMOS96 43a1 force field and simple lattice models. Our result demonstrates that preformed template fluctuations can modulate protein aggregation rates and pathways. The association of a nascent monomer with the template obeys the kinetics partitioning mechanism where the intermediate state occurs in a fraction of routes to the protofibril. It was shown that template immobility greatly increases the time of incorporating a new peptide into the preformed template compared to the fluctuating template case. This observation has also been confirmed by simulation using lattice models and may be invoked to understand the role of template fluctuations in

  4. Integrated Nanosystems Templated by Self-assembled Virus Capsids

    Science.gov (United States)

    Stephanopoulos, Nicholas

    This dissertation presents the synthesis and modeling of multicomponent nanosystems templated by self-assembled virus capsids. The design principles, synthesis, analysis, and future directions for these capsid-based materials are presented. Chapter 1 gives an overview of the literature on the application of virus capsids in constructing nanomaterials. The uses of capsids in three main areas are considered: (1) as templates for inorganic materials or nanoparticles; (2) as vehicles for biological applications like medical imaging and treatment; and (3) as scaffolds for catalytic materials. In light of this introduction, an overview of the material in this dissertation is described. Chapters 2-4 all describe integrated nanosystems templated by bacteriophage MS2, a spherical icosahedral virus capsid. MS2 possesses an interior and exterior surface that can be modified orthogonally using bioconjugation chemistry to create multivalent, multicomponent constructs with precise localization of components attached to the capsid proteins. Chapter 2 describes the use of MS2 to synthesize a photocatalytic construct by modifying the internal surface with sensitizing chromophores and the external surface with a photocatalytic porphyrin. The chromophores absorbed energy that the porphyrin could not, and transferred it to the porphyrin via FRET through the protein shell. The porphyrin was then able to utilize the energy to carry out photocatalysis at new wavelengths. In Chapter 3, porphyrins were installed on the interior surface of MS2 and DNA aptamers specific for Jurkat leukemia T cells on the exterior surface. The dual-modified capsids were able to bind to Jurkat cells, and upon illumination the porphyrins generated singlet oxygen to kill them selectively over non-targeted cells. Chapter 4 explores integrating MS2 with DNA origami in order to arrange the capsids at larger length scales. Capsids modified with fluorescent dyes inside and single-stranded DNA outside were able to

  5. Anisotropy engineering using exchange bias on antidot templates

    Directory of Open Access Journals (Sweden)

    F. J. T. Goncalves

    2015-06-01

    Full Text Available We explore an emerging device concept based on exchange bias used in conjunction with an antidot geometry to fine tune ferromagnetic resonances. Planar cavity ferromagnetic resonance is used to study the microwave response of NiO/NiFe bilayers with antidot structuring. A large frequency asymmetry with respect to an applied magnetic field is found across a broad field range whose underlying cause is linked to the distribution of magnetic poles at the antidot surfaces. This distribution is found to be particularly sensitive to the effects of exchange bias, and robust in regards to the quality of the antidot geometry. The template based antidot geometry we study offers advantages for practical device construction, and we show that it is suitable for broadband absorption and filtering applications, allowing tunable anisotropies via interface engineering.

  6. Template-Directed Ligation of Peptides to Oligonucleotides

    Science.gov (United States)

    Bruick, Richard K.; Dawson, Philip E.; Kent, Stephen BH; Usman, Nassim; Joyce, Gerald F.

    1996-01-01

    Synthetic oligonucleotides and peptides have enjoyed a wide range of applications in both biology and chemistry. As a consequence, oligonucleotide-peptide conjugates have received considerable attention, most notably in the development of antisense constructs with improved pharmacological properties. In addition, oligonucleotide-peptide conjugates have been used as molecular tags, in the assembly of supramolecular arrays and in the construction of encoded combinatorial libraries. To make these chimeric molecules more accessible for a broad range of investigations, we sought to develop a facile method for joining fully deprotected oligonucleotides and peptides through a stable amide bond linkage. Furthermore, we wished to make this ligation reaction addressable, enabling one to direct the ligation of specific oligonucleotide and peptide components.To confer specificity and accelerate the rate of the reaction, the ligation process was designed to be dependent on the presence of a complementary oligonucleotide template.

  7. Assembling Bare Au Nanoparticles at Positively Charged Templates

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Wenjie; Zhang, Honghu; Kuzmenko, Ivan; Mallapragada, Surya; Vaknin, David

    2016-05-26

    In-situ X-ray reflectivity (XRR) and grazing incidence X-ray small-angle scattering (GISAXS) reveal that unfunctionalized (bare) gold nanoparticles (AuNP) spontaneously adsorb to a cationic lipid template formed by a Langmuir monolayer of DPTAP (1,2-dihexadecanoyl-3-trimethylammonium-propane) at vapor/aqueous interfaces. Analysis of the XRR yields the electron density profile across the chargedinterfaces along the surface normal showing the AuNPs assemble with vertical thickness comparable to the particle size. The GISAXS analysis indicates that the adsorbed mono-particle layer exhibits shortrange in-plane correlations. By contrast, single-stranded DNA-functionalized AuNPs, while attracted to the positively charged surface (more efficiently with the addition of salt to the solution), display less in-plane regular packing compared to bare AuNPs.

  8. A novel algorithm for a rotation invariant template matching

    Institute of Scientific and Technical Information of China (English)

    LEI Ming; ZHANG Guang-jun

    2008-01-01

    A novel algorithm for a rotation invariant template matching is proposed when the fluctuating scope of the rotation angle is limited within the region of [-20°,20°]. The matching candidates are selected using a computationally low cost improved correlation algorithm. "AND" operation is adopted to reduce the computational cost. Therefore the algorithm improves the matching speed consumedly. The simulation results verify the efficiency of the proposed method. Moreover, when the size of reference image is fixed, the advantage of this time-saving algorithm is more obvious as the increase of the size of the real time image. The matching speed of the proposed method is over 20 times faster than the speed of the two-level pyramid decomposing accelerating method.

  9. Drug-delivery strategies by using template-synthesized nanotubes.

    Science.gov (United States)

    Perry, Jillian L; Martin, Charles R; Stewart, Jon D

    2011-05-27

    Encapsulating drugs within hollow nanotubes offers several advantages, including protection from degradation, the possibility of targeting desired locations, and drug release only under specific conditions. Template synthesis utilizes porous membranes prepared from alumina, polycarbonate, or other materials that can be dissolved under specific conditions. The method allows for great control over the lengths and diameters of nanotubes; moreover, tubes can be constructed from a wide variety of tube materials including proteins, DNA, silica, carbon, and chitosan. A number of capping strategies have been developed to seal payloads within nanotubes. Combining these advances with the ability to target and internalize nanotubes into living cells will allow these assemblies to move into the next phase of development, in vivo experiments.

  10. Template preparation of twisted nanoparticles of mesoporous silica

    Institute of Scientific and Technical Information of China (English)

    Kui Niu; Zhongbin Ni; Chengwu Fu; Tatsuo Kaneko; Mingqing Chen

    2011-01-01

    Optical isomers of N-lauroyl-L-(or-D-) alanine sodium salt {C12-L-(or-D-)AlaS} surfactants were used for the preparation of mesoporous silica nanoparticles with a twisted hexagonal rod-like morphology. Thermogravimetric analysis (TGA) was used to determine the temperature for template removal. Circular dichroism (CD) spectra of the surfactant solution with various compositions illustrated the formation and supramolecular assembly of protein-like molecular architecture leading to formation of twisted nanoparticles. Scanning electron microscopy (SEM),high-resolution transmission electron microscopy (HRTEM)and X-ray powder diffraction (XRD) patterns of these as-synthesized mesoporous silica confirmed that the twisted morphology of these nanoparticles was closely related to the supramolecular-assembled complex of amino acid surfactants.

  11. A fast template matching method for LED chip Localization

    Directory of Open Access Journals (Sweden)

    Zhong Fuqiang

    2015-01-01

    Full Text Available Efficiency determines the profits of the semiconductor producers. So the producers spare no effort to enhance the efficiency of every procedure. The purpose of the paper is to present a method to shorten the time to locate the LED chips on wafer. The method consists of 3 steps. Firstly, image segmentation and blob analyzation are used to predict the positions of potential chips. Then predict the orientations of potential chips based on their dominant orientations. Finally, according to the positions and orientations predicted above, locate the chips precisely based on gradient orientation features. Experiments show that the algorithm is faster than the traditional method we choose to locate the LED chips. Besides, even the orientations of the chips on wafer are of big deviation to the orientation of the template, the efficiency of this method won't be affected.

  12. Template-Based Electrochemically Controlled Growth of Segmented Multimetal Nanorods

    Directory of Open Access Journals (Sweden)

    Mee Rahn Kim

    2010-01-01

    Full Text Available Multisegmented one-dimensional nanostructures composed of gold, copper, and nickel have been fabricated by depositing metals electrochemically in the pores of anodic aluminum oxide (AAO templates. The electrodeposition process has been carried out using a direct current in a two-electrode electrochemical cell, where a silver-evaporated AAO membrane and a platinum plate have served as a working electrode and a counter electrode, respectively. The striped multimetal rods with an average diameter of about 300 nm have tunable lengths ranging from a few hundred nanometers to a few micrometers. The lengths and the sequence of metal segments in a striped rod can be tailored readily by controlling the durations of electrodeposition and the order of electroplating solutions, respectively.

  13. Fabrication of Nanostructured PLGA Scaffolds Using Anodic Aluminum Oxide Templates

    CERN Document Server

    Hsueh, Cheng-Chih; Hsu, Shan-Hui; Hung, Huey-Shan

    2008-01-01

    PLGA (poly(lactic-co-glycolic acid)) is one of the most used biodegradable and biocompatible materials. Nanostructured PLGA even has great application potentials in tissue engineering. In this research, a fabrication technique for nanostructured PLGA membrane was investigated and developed. In this novel fabrication approach, an anodic aluminum oxide (AAO) film was use as the template ; the PLGA solution was then cast on it ; the vacuum air-extraction process was applied to transfer the nano porous pattern from the AAO membrane to the PLGA membrane and form nanostures on it. The cell culture experiments of the bovine endothelial cells demonstrated that the nanostructured PLGA membrane can double the cell growing rate. Compared to the conventional chemical-etching process, the physical fabrication method proposed in this research not only is simpler but also does not alter the characteristics of the PLGA. The nanostructure of the PLGA membrane can be well controlled by the AAO temperate.

  14. Individuelle Templates für Rekonstruktionen des linken Herzventrikels

    Science.gov (United States)

    Feder, Stefan; Falk, Volkmar; Gutberiet, Matthias; Bartz, Dirk

    Bei krankhaften Vergrößerungen des linken Herzventrikels kann eine chirurgische Ventrikelrekonstruktion zur Verbesserung der Herzleistung beitragen. Die dabei erstellte Ventrikelgeometrie ist von entscheidender Bedeutung. Diese Studie befasst sich mit der computerbasierten Planung von individuellen Schablonen (Templates) für Ventrikelrekonstruktionen. Ziel ist es aus Cardio-CT-Daten, präoperativ, patientenindividuelle 3D-Modelle für Ventrikeltemplates zu erstellen. Hierfür wird aus CT-Daten der linksventrikuläre Blutpool segmentiert und daraus das Ventrikeltemplate modelliert. Dies geschieht anhand von zwei Kriterien: dem physiologischen Ventrikelfüllungsvolumen und der hämodynamisch günstigen ellipsoiden Form. Es konnten 20 3D-Templatemodelle mit einem durchschnittlichen Volumen von 144 ml erstellt werden. Die ellipsoide Form konnte durch manuelle Modellierung erreicht werden. Der Nachweis verbesserter Operationsergebnisse muss in nachfolgenden klinischen Studien erbracht werden.

  15. A method of ECG template extraction for biometrics applications.

    Science.gov (United States)

    Zhou, Xiang; Lu, Yang; Chen, Meng; Bao, Shu-Di; Miao, Fen

    2014-01-01

    ECG has attracted widespread attention as one of the most important non-invasive physiological signals in healthcare-system related biometrics for its characteristics like ease-of-monitoring, individual uniqueness as well as important clinical value. This study proposes a method of dynamic threshold setting to extract the most stable ECG waveform as the template for the consequent ECG identification process. With the proposed method, the accuracy of ECG biometrics using the dynamic time wraping for difference measures has been significantly improved. Analysis results with the self-built electrocardiogram database show that the deployment of the proposed method was able to reduce the half total error rate of the ECG biometric system from 3.35% to 1.45%. Its average running time on the platform of android mobile terminal was around 0.06 seconds, and thus demonstrates acceptable real-time performance.

  16. Photonic hyperuniform networks by silicon double inversion of polymer templates

    CERN Document Server

    Muller, Nicolas; Marichy, Catherine; Scheffold, Frank

    2016-01-01

    Hyperuniform disordered networks belong to a peculiar class of structured materials predicted to possess partial and complete photonic bandgaps for relatively moderate refractive index contrasts. The practical realization of such photonic designer materials is challenging however, as it requires control over a multi-step fabcrication process on optical length scales. Here we report the direct-laser writing of hyperuniform polymeric templates followed by a silicon double inversion procedure leading to high quality network structures made of polycrystalline silicon. We observe a pronounced gap in the shortwave infrared centered at a wavelength of $\\lambda_{\\text{Gap}}\\simeq $ 2.5 $\\mu$m, in nearly quantitative agreement with numerical simulations. In the experiments the typical structural length scale of the seed pattern can be varied between 2 $\\mu$m and 1.54 $\\mu$m leading to a blue-shift of the gap accompanied by an increase of the silicon volume filling fraction.

  17. A tri-block copolymer templated synthesis of gold nanostructures.

    Science.gov (United States)

    Falletta, Ester; Ridi, Francesca; Fratini, Emiliano; Vannucci, Chiara; Canton, Patrizia; Bianchi, Sabrina; Castelvetro, Valter; Baglioni, Piero

    2011-05-01

    Stable ultra-small gold nanoparticles have been synthesized in aqueous phase by using a tri-block copolymer (BMB) as a templating agent consisting of two PEG-methylacrylate chains (B blocks) anchored to a poly(methacrylic) moiety containing a trithiocarbonate unit (M block). The effect of the BMB/Au molar ratios on the final particle size, shape and monodispersity has been investigated. The synthesized nanosols have been characterized by means of Visible Absorption, Small Angle X-ray Scattering (SAXS), and Transmission Electron Microscopy (TEM). Results clearly indicate that the polymer plays a key role in determining the size and shape of gold particles, from fractal-like structures to monodisperse spherical particles with a mean diameter of about 3 nm. The aggregation behavior of these nanostructures has been characterized both in solution (SAXS) as well as on mica substrate (AFM) and has been proven to be driven by the polymer to gold concentration ratio.

  18. Robust Watermarking Scheme with Side Information and Template Matching Mechanism

    Institute of Scientific and Technical Information of China (English)

    Guo Jie(郭捷); Fang Tao; Shi Pengfei

    2004-01-01

    Digital watermarking has been proposed for the copyright protections of multimedia products. In this paper, a robust and blind watermarking scheme is presented. The concept of communication with side information is applied at the encoder to improve the probability of detection within acceptable fidelity, while the template matching technique is employed to estimate the undergone attacks in attacking channel. This scheme is optimized by the optimal design of the encoder to match with the media content and the decoder to adapt to the attack channel state. Experiments show that our method is robust against some common attacks such as filtering, compression, rotation, scaling, cropping and translation. It can be applied to both color and gray images.

  19. Fabrication of anodic aluminium oxide templates on curved surfaces.

    Science.gov (United States)

    Yin, Aijun; Guico, Rodney S; Xu, Jimmy

    2007-01-24

    Aluminium anodization provides a simple and inexpensive way to obtain nanoporous templates with uniform and controllable pore diameters and periods over a wide range. Moreover, one of the interesting possibilities afforded by the anodization process is that the anodization can take place on arbitrary surfaces, such as curved surfaces, which has not yet been well studied or applied in nanofabrication. In this paper, we characterize the anodization of Al films on silicon substrates with a curved top surface. The structures of the resultant anodic aluminium oxide (AAO) films are examined by scanning electron microscopy. Unique features including cessation, bending, and branching of pore channels are observed in the curved area. Possible growth mechanisms are proposed, which can also contribute to the understanding of the self-organization mechanism in the formation of porous AAO membranes. The new structures may open new opportunities in optical, electronic and electrochemical applications.

  20. Assembling Bare Au Nanoparticles at Positively Charged Templates

    Science.gov (United States)

    Wang, Wenjie; Zhang, Honghu; Kuzmenko, Ivan; Mallapragada, Surya; Vaknin, David

    2016-05-01

    In-situ X-ray reflectivity (XRR) and grazing incidence X-ray small-angle scattering (GISAXS) reveal that unfunctionalized (bare) gold nanoparticles (AuNP) spontaneously adsorb to a cationic lipid template formed by a Langmuir monolayer of DPTAP (1,2-dihexadecanoyl-3-trimethylammonium-propane) at vapor/aqueous interfaces. Analysis of the XRR yields the electron density profile across the charged-interfaces along the surface normal showing the AuNPs assemble with vertical thickness comparable to the particle size. The GISAXS analysis indicates that the adsorbed mono-particle layer exhibits short-range in-plane correlations. By contrast, single-stranded DNA-functionalized AuNPs, while attracted to the positively charged surface (more efficiently with the addition of salt to the solution), display less in-plane regular packing compared to bare AuNPs.

  1. Electrospun human keratin matrices as templates for tissue regeneration.

    Science.gov (United States)

    Sow, Wan Ting; Lui, Yuan Siang; Ng, Kee Woei

    2013-04-01

    The aim of this work was to study the feasibility of fabricating human hair keratin matrices through electrospinning and to evaluate the potential of these matrices for tissue regeneration. Keratin was extracted from human hair using Na2S and blended with poly(ethylene oxide) in the weight ratio of 60:1 for electrospinning. Physical morphology and chemical properties of the matrices were characterized using scanning electron microscopy and Fourier transform infrared spectroscopy, respectively. Cell viability and morphology of murine and human fibroblasts cultured on the matrices were evaluated through the Live/Dead(®) assay and scanning electron microscopy. Electrospun keratin matrices were successfully produced without affecting the chemical conformation of keratin. Fibroblasts cultured on keratin matrices showed healthy morphology and penetration into matrices at day 7. Electrospun human hair keratin matrices provide a bioinductive and structural environment for cell growth and are thus attractive as alternative templates for tissue regeneration.

  2. Biopolymer colloids for controlling and templating inorganic synthesis

    Directory of Open Access Journals (Sweden)

    Laura C. Preiss

    2014-11-01

    Full Text Available Biopolymers and biopolymer colloids can act as controlling agents and templates not only in many processes in nature, but also in a wide range of synthetic approaches. Inorganic materials can be either synthesized ex situ and later incorporated into a biopolymer structuring matrix or grown in situ in the presence of biopolymers. In this review, we focus mainly on the latter case and distinguish between the following possibilities: (i biopolymers as controlling agents of nucleation and growth of inorganic materials; (ii biopolymers as supports, either as molecular supports or as carrier particles acting as cores of core–shell structures; and (iii so-called “soft templates”, which include on one hand stabilized droplets, micelles, and vesicles, and on the other hand continuous scaffolds generated by gelling biopolymers.

  3. Study on template removal from silicalite-1 giant crystals

    Energy Technology Data Exchange (ETDEWEB)

    Mateo, Ester, E-mail: emateog@unizar.es [Department of Earth Sciences, University of Zaragoza, C/ Pedro Cerbuna 12, 50009 Zaragoza (Spain); Paniagua, Andres [Department of Earth Sciences, University of Zaragoza, C/ Pedro Cerbuna 12, 50009 Zaragoza (Spain); Gueell, Carme [Unitat d' Enologia del CeRTA (Generalitat de Catalunya), Departament d' Enginyeria Quimica, Universitat Rovira i Virgili, 43007 Tarragona (Spain); Coronas, Joaquin, E-mail: coronas@unizar.es [Department of Chemical and Environmental Engineering and Nanoscience Institute of Aragon, University of Zaragoza, 50018 Zaragoza (Spain); Santamaria, Jesus [Department of Chemical and Environmental Engineering and Nanoscience Institute of Aragon, University of Zaragoza, 50018 Zaragoza (Spain)

    2009-06-03

    The formation of silicalite-1 giant crystals with a size of up to 3 mm can be achieved by controlling the factors affecting the nucleation and crystallization process using a piece of tube of quartz glass as the silica source under hydrothermal conditions. Once prepared and characterized by scanning electron and optical microscopy, thermogravimetry and single crystal powder X-ray diffraction, a challenge that remains is the removal of the template giving rise to colourless and crack-free crystals. As pointed out by stereoscopical, optical and fluorescence confocal optical microscopies, this was achieved in this study by the calcination protocols developed, involving the use of pure O{sub 2} and 5% of O{sub 2} in Ar and O{sub 2}-O{sub 3} (1.5% of O{sub 3}), maximum temperatures of 400 deg. C and heating rates as low as 0.5 deg. C/min.

  4. Self-templated chemically stable hollow spherical covalent organic framework

    Science.gov (United States)

    Kandambeth, Sharath; Venkatesh, V.; Shinde, Digambar B.; Kumari, Sushma; Halder, Arjun; Verma, Sandeep; Banerjee, Rahul

    2015-04-01

    Covalent organic frameworks are a family of crystalline porous materials with promising applications. Although active research on the design and synthesis of covalent organic frameworks has been ongoing for almost a decade, the mechanisms of formation of covalent organic frameworks crystallites remain poorly understood. Here we report the synthesis of a hollow spherical covalent organic framework with mesoporous walls in a single-step template-free method. A detailed time-dependent study of hollow sphere formation reveals that an inside-out Ostwald ripening process is responsible for the hollow sphere formation. The synthesized covalent organic framework hollow spheres are highly porous (surface area ~1,500 m2 g-1), crystalline and chemically stable, due to the presence of strong intramolecular hydrogen bonding. These mesoporous hollow sphere covalent organic frameworks are used for a trypsin immobilization study, which shows an uptake of 15.5 μmol g-1 of trypsin.

  5. Underwater acoustic image segmentation based on deformable template

    Institute of Scientific and Technical Information of China (English)

    SANG Enfang; LIU Zhuofu

    2005-01-01

    In order to solve the problem of deformation and blurred edge in underwater acoustic image segmentation, an approach based on the deformable template is presented. Compared with the energy minimization of the Snake model, the energy function is redefined by adding a shape restriction. This improves the noise-resistance ability so that robustness and high segmentation efficiency are acquired. The energy optimization problem is tackled using the Dijkstra Algorithm. This method has been successfully tested on the filled-in acoustic images.The results show that this algorithm is efficient, precise and very immune to image deformation and noise when compared to results obtained from the Snake model and several traditional optimization methods.

  6. Silica needle template fabrication of metal hollow microneedle arrays

    Science.gov (United States)

    Zhu, M. W.; Li, H. W.; Chen, X. L.; Tang, Y. F.; Lu, M. H.; Chen, Y. F.

    2009-11-01

    Drug delivery through hollow microneedle (HMN) arrays has now been recognized as one of the most promising techniques because it minimizes the shortcomings of the traditional drug delivery methods and has many exciting advantages—pain free and tunable release rates, for example. However, this drug delivery method has been hindered greatly from mass clinical application because of the high fabrication cost of HMN arrays. Hence, we developed a simple and cost-effective procedure using silica needles as templates to massively fabricate HMN arrays by using popular materials and industrially applicable processes of micro- imprint, hot embossing, electroplating and polishing. Metal HMN arrays with high quality are prepared with great flexibility with tunable parameters of area, length of needle, size of hollow and array dimension. This efficient and cost-effective fabrication method can also be applied to other applications after minor alterations, such as preparation of optic, acoustic and solar harvesting materials and devices.

  7. Simulation and template generation for LISA Pathfinder Data Analysis

    Science.gov (United States)

    Rais, Boutheina; Grynagier, Adrien; Diaz-Aguiló, Marc; Armano, Michele

    The LISA PathFinder (LPF) mission is a technology demonstration mission which aims at testing a number of critical technical challenges that the future LISA (Gravitational wave detection in space) mission will face: LPF can be seen as a complex laboratory experiment in space. It is therefore critical to be able to define which measurements and which actuations will be applied during the scientific part of the mission. The LISA Technology Package (LTP), part of ESA's hardware contribution to LPF, outlines hence the importance of developing an appropriate simulation tool in order to test these strate-gies before launch and to analyse the dynamical behaviour of the system during the mission. The detailed model of the simulation can be used in an off-line mode for further planning: cor-rect estimation of timeline priorities, risk factors, duty cycles, data analysis readiness. The Lisa Technology Package Data Analysis (LTPDA) team has developed an object-oriented MATLAB toolbox for general case of data analysis needs. However, to meet specific needs of LPF mis-sion, a template generation tool has been developed. It provides a recognizable data pattern, avoiding the risk of missing the model during mission's analysis. The aim of the template generator tool is to provide tools to analyse LTP system modeled in State Space Model (SSM). The SSM class, the aim of this poster, includes this tools within the LTPDA toolbox. It can be used to generate the time-domain response for any given actuation and/or noise, the frequency response using bode diagrams and the steady state of the system. It allows the user to project noises on system outputs to get spectra of outputs for given input noises spectra. This class is sufficiently general to be used with a variety of systems once the SSM of the system is provided in the library. Furthermore, one of the main objectives of the data analysis for LPF (the estimation of different parameters of the system), can be achieved by a new

  8. Protocols for Copying and Proofreading in Template-Assisted Polymerization

    Science.gov (United States)

    Pigolotti, Simone; Sartori, Pablo

    2016-03-01

    We discuss how information encoded in a template polymer can be stochastically copied into a copy polymer. We consider four different stochastic copy protocols of increasing complexity, inspired by building blocks of the mRNA translation pathway. In the first protocol, monomer incorporation occurs in a single stochastic transition. We then move to a more elaborate protocol in which an intermediate step can be used for error correction. Finally, we discuss the operating regimes of two kinetic proofreading protocols: one in which proofreading acts from the final copying step, and one in which it acts from an intermediate step. We review known results for these models and, in some cases, extend them to analyze all possible combinations of energetic and kinetic discrimination. We show that, in each of these protocols, only a limited number of these combinations leads to an improvement of the overall copying accuracy.

  9. Self-Assembled DNA Templated Nano-wires and Circuits

    Science.gov (United States)

    Braun, Erez

    2000-03-01

    The realization that conventional microelectronics is approaching its miniaturization limits has motivated the search for an alternative route based on self-assembled nanometer-scale electronics. We have recently proposed a new approach based on the hybridization of biological and electronic materials (Braun E., Eichen Y., Sivan U. and Ben-Yoseph G., Nature 391, 775 (1998)). The concept relies on a two-step self-assembly process. The inherent molecular recognition capabilities of DNA molecules are first utilized to construct a network that serves as a template for the subsequent assembly of electronic materials into a circuit. The utilization of DNA and its associated enzymatic machinery enables: (a) self-assembly of complex substrates, (b) specific molecular addresses for the localization of electronic materials (e.g., gold colloids) by standard molecular biology techniques, (c) interdevice wiring and (d) bridging the microscopic structures to the macroscopic world. The self-assembly of nanometer scale electronics relies on two complementary developments. First, the ability to convert DNA molecules into thin conductive wires and second, the self-assembly of complex extended DNA templates. Our progress in these two directions will be presented. Regarding the first issue, a physical process resulting in condensation of gold colloids onto DNA molecules enables the assembly of thin gold wires (around 100-200 A wide) having, in principle, unlimited extensions. The second issue is developed in the context of recombinant DNA which allows the self-assembly of precise molecular junctions and networks. Specifically, we use RecA protein, which is the main protein responsible for genetic recombination in E. Coli bacteria, to construct DNA junctions at pre-designed addresses (sequences) on the molecules. The integration of these processes allows advancing nanometer-scale electronics. A realistic fabrication scheme for a room-temperature single-electron transistor

  10. Microstructured Hydrogel Templates for the Formation of Conductive Gold Nanowire Arrays

    NARCIS (Netherlands)

    Wuennemann, Patrick; Noyong, Michael; Kreuels, Klaus; Bruex, Roland; Gordiichuk, Pavlo; van Rijn, Patrick; Plamper, Felix A.; Simon, Ulrich; Boeker, Alexander

    2016-01-01

    Microstructured hydrogel allows for a new template-guided method to obtain conductive nanowire arrays on a large scale. To generate the template, an imprinting process is used in order to synthesize the hydrogel directly into the grooves of wrinkled polydimethylsiloxane (PDMS). The resulting poly(N-

  11. A bio-originated porous template for the fabrication of very long, inorganic nanotubes and nanowires.

    Science.gov (United States)

    Mumm, F; Kemell, M; Leskelä, M; Sikorski, P

    2010-06-01

    A biopolymer-based template assembly constructed around the spines of the bristle worm Aphrodita aculeata (sea mouse) was used to fabricate very high aspect ratio nanowires and nanotubes using established methods adopted from nanofabrication in porous membranes. The easily available bio-originated template contains more than 100 000 highly ordered, very high aspect ratio nanochannels, each about 150 to 200 nm in diameter but up to a centimetre in length. Their parallel, hexagonal arrangement in the spine constitutes a photonic crystal, which gives the animal its colourful, iridescent appearance. Around the nanochannels, the spines consist of a chitin/protein composite material, which has been shown to withstand the chemical and thermal conditions needed for established template-assisted nanofabrication strategies. A template preparation procedure was developed and the template was used to fabricate copper and nickel nanowires by electrodeposition and aluminium oxide nanotubes by atomic layer deposition. Due to their high thermal and chemical stability, decomposition of the filled templates proved to be difficult, and different approaches to obtain separated nanostructures are described and discussed. Alongside this, the presented system of parallel nanowires or nanotubes in a biopolymer matrix might be utilized in applications, where such separated structures are not needed. Comparing to porous membranes, the presented template allows us to increase the maximum length of nanotubes and nanowires produced using nanochannel-based templates by at least one order of magnitude.

  12. Evaluation of methods aimed at complete removal of template from molecularly imprinted polymers

    NARCIS (Netherlands)

    Ellwanger, A; Berggren, C; Bayoudh, S; Crecenzi, C; Karlsson, L; Owens, PK; Ensing, K; Cormack, P; Sherrington, D; Sellergren, B

    2001-01-01

    Polymers imprinted with clenbuterol were used to study the influence of various post-polymerization treatments [e.g., thermal annealing, microwave assisted extraction (MAE), Soxhlet extraction and supercritical fluid template desorption] on the bleeding of residual template. The aim of the study was

  13. A Template-Controlled Solid-State Reaction for the Organic Chemistry Laboratory

    Science.gov (United States)

    Friscic, Tomislav; Hamilton, Tamara D.; Papaefstathiou, Giannis S.; MacGillivray, Leonard R.

    2005-01-01

    An experiment for the organic chemistry laboratory that involves a template-controlled solid-state reaction is described. The experiment utilizes a template to direct the assembly of an olefin in the solid state that undergoes a [2 + 2] photodimerization.

  14. Localized Template-Driven Functionalization of Nanoparticles by Dynamic Combinatorial Chemistry

    NARCIS (Netherlands)

    Nowak, Piotr; Saggiomo, Vittorio; Salehian, Fatemeh; Colomb-Delsuc, Mathieu; Han, Yang; Otto, Sijbren

    2015-01-01

    We have developed a method for the localized functionalization of gold nanoparticles using imine-based dynamic combinatorial chemistry. By using DNA templates, amines were grafted on the aldehyde-functionalized nanoparticles only if and where the nanoparticles interacted with the template molecules.

  15. Localized Template-Driven Functionalization of Nanoparticles by Dynamic Combinatorial Chemistry

    NARCIS (Netherlands)

    Nowak, Piotr; Saggiomo, Vittorio; Salehian, Fatemeh; Colomb-Delsuc, Mathieu; Han, Yang; Otto, Sijbren

    2015-01-01

    We have developed a method for the localized functionalization of gold nanoparticles using imine-based dynamic combinatorial chemistry. By using DNA templates, amines were grafted on the aldehyde-functionalized nanoparticles only if and where the nanoparticles interacted with the template molecules.

  16. Age-specific average head template for typically developing 6-month-old infants.

    Directory of Open Access Journals (Sweden)

    Lisa F Akiyama

    Full Text Available Due to the rapid anatomical changes that occur within the brain structure in early human development and the significant differences between infant brains and the widely used standard adult templates, it becomes increasingly important to utilize appropriate age- and population-specific average templates when analyzing infant neuroimaging data. In this study we created a new and highly detailed age-specific unbiased average head template in a standard MNI152-like infant coordinate system for healthy, typically developing 6-month-old infants by performing linear normalization, diffeomorphic normalization and iterative averaging processing on 60 subjects' structural images. The resulting age-specific average templates in a standard MNI152-like infant coordinate system demonstrate sharper anatomical detail and clarity compared to existing infant average templates and successfully retains the average head size of the 6-month-old infant. An example usage of the average infant templates transforms magnetoencephalography (MEG estimated activity locations from MEG's subject-specific head coordinate space to the standard MNI152-like infant coordinate space. We also created a new atlas that reflects the true 6-month-old infant brain anatomy. Average templates and atlas are publicly available on our website (http://ilabs.washington.edu/6-m-templates-atlas.

  17. Pattern Registration Between Spherical Block-Copolymer Domains and Topographical Templates

    NARCIS (Netherlands)

    Cheng, J.Y.; Zhang, F.; Smith, H.I.; Vancso, Gyula J.; Ross, C.A.

    2006-01-01

    Pattern registration is achieved in thin films of self-assembling block copolymers by using a topographical template to guide the positions of the polymer domains. The placement accuracy of the polymer domains is related to the edge roughness of the topographical template, and the ultimate placement

  18. Experience With a Novel, Global, Open-Access Template for Major Incidents: Qualitative Feasibility Study.

    Science.gov (United States)

    Fattah, Sabina; Agledahl, Kari Milch; Rehn, Marius; Wisborg, Torben

    2017-08-01

    The transfer of experiences gained after prehospital medical responses to major incidents has largely been nonsystematic, and better-structured reporting methods have been advocated. A consensus-based template was recently created and implemented as an open-access website. This qualitative study assessed the feasibility of using the template and reporting site. Informants who had used or who had been asked to use the template were interviewed. The semi-structured interviews were transcribed verbatim, and the transcripts were analyzed by using an inductive approach based on grounded theory methodology. The major theme identified was a need for "defining purpose" as explained by the minor themes "relevance," "scope," "resources," and "usefulness." Informants reported that the template content needed to be revised and that the scope and rationale behind each question should be conveyed to the user. Resources necessary for reporting and clarity regarding the aim and outcome also need to be communicated to users and policy-makers. The interface between informants and the template is critical. Informants considered the template and website useful but reported that the workload exceeded their expectations. Despite pilot testing of the template before implementation, early revision of the template is recommended. (Disaster Med Public Health Preparedness. 2017;11:403-406).

  19. A bio-originated porous template for the fabrication of very long, inorganic nanotubes and nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Mumm, F; Sikorski, P [Department of Physics, Norwegian University of Science and Technology, Trondheim (Norway); Kemell, M; Leskelae, M, E-mail: mumm@phys.ntnu.n, E-mail: pawel.sikorski@phys.ntnu.n [Department of Chemistry, University of Helsinki, Helsinki (Finland)

    2010-06-15

    A biopolymer-based template assembly constructed around the spines of the bristle worm Aphrodita aculeata (sea mouse) was used to fabricate very high aspect ratio nanowires and nanotubes using established methods adopted from nanofabrication in porous membranes. The easily available bio-originated template contains more than 100 000 highly ordered, very high aspect ratio nanochannels, each about 150 to 200 nm in diameter but up to a centimetre in length. Their parallel, hexagonal arrangement in the spine constitutes a photonic crystal, which gives the animal its colourful, iridescent appearance. Around the nanochannels, the spines consist of a chitin/protein composite material, which has been shown to withstand the chemical and thermal conditions needed for established template-assisted nanofabrication strategies. A template preparation procedure was developed and the template was used to fabricate copper and nickel nanowires by electrodeposition and aluminium oxide nanotubes by atomic layer deposition. Due to their high thermal and chemical stability, decomposition of the filled templates proved to be difficult, and different approaches to obtain separated nanostructures are described and discussed. Alongside this, the presented system of parallel nanowires or nanotubes in a biopolymer matrix might be utilized in applications, where such separated structures are not needed. Comparing to porous membranes, the presented template allows us to increase the maximum length of nanotubes and nanowires produced using nanochannel-based templates by at least one order of magnitude.

  20. Fabrication of Ordered Macroporous CdS and ZnS by Colloidal Crystal Template

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Ordered macroporous semiconductors CdS and ZnS with regular arrays of spherical pores have been fabricated by poly (styrene-acrylic) (PSA) colloidal crystal template. It was found that the exact three-dimensional (3D) structure of the template had been imprinted in the final material.

  1. Structural templating in a nonplanar phthalocyanine using single crystal copper iodide

    OpenAIRE

    Rochford, L. A. (Luke A.); Ramadan, Alexandra J.; Keeble, Dean S.; Ryan, Mary P.; Heutz, Sandrine; Jones, T S

    2015-01-01

    Solution-grown copper iodide crystals are used as substrates for the templated growth of the nonplanar vanadyl phthalocyanine using organic molecular beam deposition. Structural characterization reveals a single molecular orientation produced by the (111) Miller plane of the copper iodide crystals. These fundamental measurements show the importance of morphology and structure in templating interactions for organic electronics applications.

  2. Ionic Liquid Microemullsions, Templates for Directing Morphology of Cellulose Biopolymer Nanoparticles (Briefing Charts)

    Science.gov (United States)

    2015-08-19

    Charts 3. DATES COVERED (From - To) July 2015-August 2015 4. TITLE AND SUBTITLE Ionic Liquid Microemullsions, Templates for Directing Morphology of...unlimited AFRL Public Affairs Clearance No. TBD Ionic Liquid Microemullsions, Templates for Directing Morphology of Cellulose Biopolymer...AFRL Public Affairs Clearance No. 15438 Outline • Background on Cellulose and Ionic Liquids • Materials and Methods • Results: Designing an IL

  3. Preparation of Mesoporous Molecular Sieves Al-MSU-S Using Ionic Liquids as Template

    Institute of Scientific and Technical Information of China (English)

    YU Xin-Yu; LIU Cai-Hua; YANG Jian-Guo; WU Hai-Hong; WU Peng; HE Ming-Yuan

    2006-01-01

    Mesoporous molecular sieves Al-MSU-S has been prepared from the precursor of zeolite Y using ionic liquids l-hexadecane-3-methylimidazolium bromide (CMIMB) as a template in basic medium, which exhibited larger pore diameter, pore volume and surface area than that synthesized using cetyl trimethyl ammonium bromide (CTAB)template.

  4. Performance evaluation of fusing protected fingerprint minutiae templates on the decision level

    NARCIS (Netherlands)

    Yang, B.; Groot, K.T.J. de; Christoph Busch; Veldhuis, R.N.J.; Xu, H.

    2013-01-01

    In a biometric authentication system using protected templates, a pseudonymous identifier is the part of a protected template that can be directly compared. Each compared pair of pseudonymous identifiersresults in a decision testing whether both identifiers are derived from the same biometric charac

  5. Growth control of carbon nanotubes using by anodic aluminum oxide nano templates.

    Science.gov (United States)

    Park, Yong Seob; Choi, Won Seek; Yi, Junsin; Lee, Jaehyeong

    2014-05-01

    Anodic Aluminum Oxide (AAO) template prepared in acid electrolyte possess regular and highly anisotropic porous structure with pore diameter range from five to several hundred nanometers, and with a density of pores ranging from 10(9) to 10(11) cm(-2). AAO can be used as microfilters and templates for the growth of CNTs and metal or semiconductor nanowires. Varying anodizing conditions such as temperature, electrolyte, applied voltage, anodizing and widening time, one can control the diameter, the length, and the density of pores. In this work, we deposited Al thin film by radio frequency magnetron sputtering method to fabricate AAO nano template and synthesized multi-well carbon nanotubes on a glass substrate by microwave plasma-enhanced chemical vapor deposition (MPECVD). AAO nano-porous templates with various pore sizes and depths were introduced to control the dimension and density of CNT arrays. The AAO nano template was synthesize on glass by two-step anodization technique. The average diameter and interpore distance of AAO nano template are about 65 nm and 82 nm. The pore density and AAO nano template thickness are about 2.1 x 10(10) pores/cm2 and 1 microm, respectively. Aligned CNTs on the AAO nano template were synthesized by MPECVD at 650 degrees C with the Ni catalyst layer. The length and diameter of CNTs were grown 2 microm and 50 nm, respectively.

  6. Atrophy-specific MRI brain template for Alzheimer's disease and mild cognitive impairment

    DEFF Research Database (Denmark)

    Fonov, Vladimir; Coupe, Pierrick; Eskildsen, Simon Fristed

    between LVV and ICC yielded values of mean(sd) 2.13(0.72)% for NC, 2.45(0.84)% for MCI and 2.84(0.91)% for AD. The continuous, four dimensional anatomical template was created. For a given RLVV, an appropriate three dimensional anatomical template may be constructed, reflecting the average shape...

  7. A Novel Approach Based on PCNNs Template for Fingerprint Image Thinning

    NARCIS (Netherlands)

    Dacheng, X.; Bailiang, L.; Nijholt, A.; Kacprzyk, J.

    2009-01-01

    A PCNNs-based square-and-triangle-template method for binary fingerprint image thinning is proposed. The algorithm is iterative, in which a combined sequential and parallel processing is employed to accelerate execution. When a neuron satisfies the square template, the pixel corresponding to this ne

  8. How to Test Mandatory Text Templates: The European Patient Information Leaflet

    NARCIS (Netherlands)

    Pander Maat, H.L.W.; Lentz, L.R.; Raynor, T.

    2015-01-01

    The structure of patient information leaflets (PILs) supplied with medicines in the European Union is largely determined by a regulatory template, requiring a fixed sequence of pre-formulated headings and sub-headings. The template has been criticized on various occasions, but it has never been test

  9. Microstructured Hydrogel Templates for the Formation of Conductive Gold Nanowire Arrays

    NARCIS (Netherlands)

    Wuennemann, Patrick; Noyong, Michael; Kreuels, Klaus; Bruex, Roland; Gordiichuk, Pavlo; van Rijn, Patrick; Plamper, Felix A.; Simon, Ulrich; Boeker, Alexander

    Microstructured hydrogel allows for a new template-guided method to obtain conductive nanowire arrays on a large scale. To generate the template, an imprinting process is used in order to synthesize the hydrogel directly into the grooves of wrinkled polydimethylsiloxane (PDMS). The resulting

  10. A self-template strategy for the synthesis of mesoporous carbon nanofibers as advanced supercapacitor electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Li, Wei; Zhang, Fan; Dou, Yuqian; Wu, Zhangxiong; Liu, Haijing; Qian, Xufang; Gu, Dong; Xia, Yongyao; Tu, Bo; Zhao, Dongyuan [Department of Chemistry, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials and Laboratory of Advanced Materials, Fudan University, Shanghai 200433 (China)

    2011-05-15

    Self-construction: A facile self-templating strategy is presented for the synthesis of mesoporous carbon nanofibers by using zinc glycolate fibers as the built-in template. The spectacular architectures show excellent performances as recommended electrode material for electrochemical capacitors. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  11. Vernier-templated synthesis, crystal structure, and supramolecular chemistry of a 12-porphyrin nanoring.

    Science.gov (United States)

    Kondratuk, Dmitry V; Sprafke, Johannes K; O'Sullivan, Melanie C; Perdigao, Luis M A; Saywell, Alex; Malfois, Marc; O'Shea, James N; Beton, Peter H; Thompson, Amber L; Anderson, Harry L

    2014-09-26

    Vernier templating exploits a mismatch between the number of binding sites in a template and a reactant to direct the formation of a product that is large enough to bind several template units. Here, we present a detailed study of the Vernier-templated synthesis of a 12-porphyrin nanoring. NMR and small-angle X-ray scattering (SAXS) analyses show that Vernier complexes are formed as intermediates in the cyclo-oligomerization reaction. UV/Vis/NIR titrations show that the three-component assembly of the 12-porphyrin nanoring figure-of-eight template complex displays high allosteric cooperativity and chelate cooperativity. This nanoring-template 1:2 complex is among the largest synthetic molecules to have been characterized by single-crystal analysis. It crystallizes as a racemate, with an angle of 27° between the planes of the two template units. The crystal structure reveals many unexpected intramolecular C-H⋅⋅⋅N contacts involving the tert-butyl side chains. Scanning tunneling microscopy (STM) experiments show that molecules of the 12-porphyrin template complex can remain intact on the gold surface, although the majority of the material unfolds into the free nanoring during electrospray deposition.

  12. Synthesis mechanism and improved (100) oriented NaNbO3 templates by ultrasonication

    Science.gov (United States)

    Ramdasi, O. A.; Kolekar, Y. D.; Kim, D. J.; Song, T. K.; Kambale, R. C.

    2016-05-01

    The plate-like NaNbO3 (NN) templates with (100) preferential orientation was synthesized from bismuth layer structured ferroelectric Bi2.5Na3.5Nb5O18 (BNN) precursor by topochemical microcrystal conversion (TMC) method. The large platelets of BNN were first obtained by molten salt synthesis at the 1125 °C with a salt-to oxide weight ratio 1.5: 1. The anisotropic NN templates were derived from BNN at the 975 °C with BNN/ Na2CO3 molar ratio of 1:1.5. The NaNbO3 templates have an average length of ~ 10-14 µm. The NN templates retains their elemental constitutes of Na, Nb and O in stoichiometric proportion. The effect of ultrasonication on the orientation factor (Fh00) of NN templates was understood by X-ray diffraction (XRD) and scanning electron microscopy (SEM) results. The degree of (100) orientation of as synthesized NN templates (~57%) was found to be increased (~89%) after ultrasonication. Moreover, the microstructure i.e. alignment / shape of as synthesized NN templates was changed from rectangular (110) orientation to square (100) orientation geometry after ultrasonication. Hence, ultrasonication is a cost effective approach to preparing the textured piezoelectric ceramics by the template grain growth technique using tape casting.

  13. Synthesis mechanism and improved (100) oriented NaNbO{sub 3} templates by ultrasonication

    Energy Technology Data Exchange (ETDEWEB)

    Ramdasi, O. A.; Kolekar, Y. D.; Kambale, R. C., E-mail: rckambale@gmail.com [Department of Physics, Savitribai Phule Pune University, Pune-411 007, Maharashtra (India); Kim, D. J.; Song, T. K. [School of Nano and Advanced Materials Engineering, Changwon National University, Gyeongnam 641-773 (Korea, Republic of)

    2016-05-23

    The plate-like NaNbO{sub 3} (NN) templates with (100) preferential orientation was synthesized from bismuth layer structured ferroelectric Bi{sub 2.5}Na{sub 3.5}Nb{sub 5}O{sub 18} (BNN) precursor by topochemical microcrystal conversion (TMC) method. The large platelets of BNN were first obtained by molten salt synthesis at the 1125 °C with a salt-to oxide weight ratio 1.5: 1. The anisotropic NN templates were derived from BNN at the 975 °C with BNN/ Na{sub 2}CO{sub 3} molar ratio of 1:1.5. The NaNbO{sub 3} templates have an average length of ~ 10-14 µm. The NN templates retains their elemental constitutes of Na, Nb and O in stoichiometric proportion. The effect of ultrasonication on the orientation factor (F{sub h00}) of NN templates was understood by X-ray diffraction (XRD) and scanning electron microscopy (SEM) results. The degree of (100) orientation of as synthesized NN templates (~57%) was found to be increased (~89%) after ultrasonication. Moreover, the microstructure i.e. alignment / shape of as synthesized NN templates was changed from rectangular (110) orientation to square (100) orientation geometry after ultrasonication. Hence, ultrasonication is a cost effective approach to preparing the textured piezoelectric ceramics by the template grain growth technique using tape casting.

  14. A two-stage visual tracking algorithm using dual-template

    Directory of Open Access Journals (Sweden)

    Yu Xia

    2016-10-01

    Full Text Available Template matching and updates are crucial steps in visual object tracking. In this article, we propose a two-stage object tracking algorithm using a dual-template. By design, the initial state of a target can be estimated using a prior fixed template at the first stage with a particle-filter-based tracking framework. The use of prior templates maintains the stability of an object tracking algorithm, because it consists of invariant and important features. In the second step, a mean shift is used to gain the optimal location of the object with the stage update template. The stage template improves the ability of target recognition using a classified update method. The complementary of dual-template improves the quality of template matching and the performance of object tracking. Experimental results demonstrate that the proposed algorithm improves the tracking performance in terms of accuracy and robustness, and it exhibits good results in the presence of deformation, noise and occlusion.

  15. Review of quality of x-rays for templating for total hip arthroplasty.

    Science.gov (United States)

    Khan, Faiz; Ahmad, Tayyab; Condon, Finbarr; Lenehan, Brian

    2015-03-01

    Digital templating of x-rays for total hip arthroplasty is used routinely for pre-operative planning. This is to assure that appropriately sized implants are selected to replicate patient's hip biomechanics. Multiple studies have shown that templating does not always correspond to the final implants used. The aim of this study was to assess the suitability of the x-rays taken pre-operatively for templating for total hip arthroplasty. We undertook a review of a series of pre-operative templating pelvis x-rays in 100 consecutive patients undergoing total hip arthroplasty. These x-rays were compared against set criteria to determine their suitability for use for templating. We determined that six x-rays met the criteria whereas ninety four x-rays did not meet the criteria for suitable x-rays. Twenty patients had repeat x-rays. The reasons for unsuitability were inadequate opposite femur (66%), absence or incomplete template (54%), inadequate femur length (47%), external rotation (39%), absence of opposite hip (4%). The twenty repeated x-rays were also reviewed for the same parameters and two (10%) satisfied the established criteria. It is imperative that x-rays for templating for total hip arthroplasty are done to a strict standard to obtain an x-ray that is appropriate for templating and there is minimal exposure of the patient to irradiation.

  16. Application of the Generic Modeling Template Approach to Unsaturated Fatty Acid Oxidation and Crystallization Systems

    DEFF Research Database (Denmark)

    Fedorova, Marina; Papadakis, Emmanouil; Meisler, Kresten Troelstrup

    2014-01-01

    In this work, a couple of applications of the template-based approach for model development are presented. The computer-aided template concept has been developed based on a model decomposition technique and has been implemented as a software tool, which provides a user-friendly interface for foll...

  17. Nanolithography based contacting method for electrical measurements on single template synthesized nanowires

    DEFF Research Database (Denmark)

    Fusil, S.; Piraux, L.; Mátéfi-Tempfli, Stefan

    2005-01-01

    A reliable method enabling electrical measurements on single nanowires prepared by electrodeposition in an alumina template is described. This technique is based on electrically controlled nanoindentation of a thin insulating resist deposited on the top face of the template filled by the nanowire...

  18. Enhancing the Porosity of Mesoporous Carbon-Templated ZSM-5 by Desilication

    DEFF Research Database (Denmark)

    Holm, Martin Spangsberg; Egeblad, Kresten; Vennestrøm, Peter Nicolai Ravnborg

    2008-01-01

    A tunable desilication protocol applied on a mesoporous ZSM-5 zeolite synthesized by carbon-templating is reported. The strategy enables a systematic manufacture of zeolite catalysts with moderate to very high mesoporosities. Coupling carbon-templating and desilication thus allow for more than...

  19. Evaluation of methods aimed at complete removal of template from molecularly imprinted polymers

    NARCIS (Netherlands)

    Ellwanger, A; Berggren, C; Bayoudh, S; Crecenzi, C; Karlsson, L; Owens, PK; Ensing, K; Cormack, P; Sherrington, D; Sellergren, B

    2001-01-01

    Polymers imprinted with clenbuterol were used to study the influence of various post-polymerization treatments [e.g., thermal annealing, microwave assisted extraction (MAE), Soxhlet extraction and supercritical fluid template desorption] on the bleeding of residual template. The aim of the study was

  20. Pengenalan Angka Pada Sistem Operasi Android Dengan Menggunakan Metode Template Matching

    Directory of Open Access Journals (Sweden)

    Abdi Pandu Kusuma

    2016-07-01

    Full Text Available AbstrakUsia dini merupakan usia yang efektif untuk mengembangkan berbagai potensi yang dimiliki oleh anak. Upaya pengembangan potensi dapat dilakukan melalui berbagai cara termasuk dengan cara bermain. Bermain bagi anak merupakan cara yang tepat untuk belajar. Berdasarkan fenomena tersebut, maka perlu dibuat sebuah aplikasi pengenalan angka yang interaktif dengan unsur edukasi. Aplikasi tersebut diharapkan dapat mengambil keputusan secara otomatis apa yang ditulis anak itu bernilai benar atau salah dan juga dapat membangkitkan semangat belajar anak dalam mengenal pola angka. Solusi yang sesuai agar aplikasi tersebut dapat memberikan jawaban salah atau benar digunakan satu metode yaitu template matching. Pengenalan angka dengan menggunakan metode template matching dilakukan dengan cara membandingkan citra masukan dengan citra template. Hasil template matching dihitung dari banyaknya titik pada citra masukan yang sesuai dengan citra template. Template disediakan pada database untuk memberikan contoh cara penulisan pola angka. Uji coba dilakukan pada aplikasi sebanyak 40 kali dengan pola yang berbeda. Dari hasil uji coba didapat prosentase keberhasilan aplikasi ini mencapai 75,75%.Kata kunci: Belajar, bermain, Template Matching, dan pola. AbstractEarly childhood is an effective age to develop the potential of the child. Potential development efforts can be done through various ways, including by playing. Playing for children is a great way to learn. Based on this phenomenon, it should be made an introduction to the numbers interactive application with elements of education. The application is expected to take decisions automatically what the child is written is true or false, and also can encourage a child's learning in recognizing number patterns. Appropriate solutions so that the app can give an answer right or wrong to use the methods that template matching. The introduction of the numbers by using template matching is done by comparing the

  1. Specifying Requirements of Real-Time System with Rules and Templates

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    This paper presents a model specifying requirements of real-time systems. Different from existing researches, this model mainly uses rules and templates to represent hierarchical FSMs (Finite State Machine). In this model, one rule corresponds to one state transition of FSM and one template corresponds to one FSM. Rules and information with respect to a FSM can be written in a template. So templates include not only state diagrams, but also information that can not be described by FSM, such as performance requirements. The specification using this model consists of a collection of templates and it is easy for users to understand and to review. After introduced the related researches and principles of the model, this paper specifies requirements of a real-time system with this model, and discusses characters of this model in the end.

  2. Using Writing Templates as Materials to Improve Writing Skills in EFL Classes: An Experimental Study

    Directory of Open Access Journals (Sweden)

    Ahmet Selçuk AKDEMİR

    2016-08-01

    Full Text Available In this study it was aimed at revealing the findings of an experimental study in which writing templates were used as writing materials to improve writing skills in intermediate (B1 EFL classes as well as reviewing the concepts writing skills, second language writing and writing templates. The study was conducted with 50 students, aged 20-23, of a public university in Turkey. In Writing and Speaking in English II class writing templates were used as writing materials during 12 weeks. The students were asked to fulfil tasks asking them to use some basic writing types for B1 level such as formal and informal letter writing, CV writing, writing business e-mails etc. before and after the study. It was concluded that writing templates can be used as writing materials to improve intermediate (B1 EFL classes.Keywords: Writing, writing templates, L2 writing.

  3. Self-Ordered Nanoporous Alumina Templates Formed by Anodization of Aluminum in Oxalic Acid

    Science.gov (United States)

    Vida-Simiti, Ioan; Nemes, Dorel; Jumate, Nicolaie; Thalmaier, Gyorgy; Sechel, Niculina

    2012-10-01

    Anodic aluminum oxide (AAO) membranes with highly ordered nanopores serve as ideal templates for the formation of various nanostructured materials. The procedure of the template preparation is based on a two-step self-organized anodization of aluminum. In the current study, AAO templates were fabricated in 0.3 M oxalic acid under the anodizing potential range of 30-60 V at an electrolyte temperature of ~5°C. The AAO templates were analyzed using scanning electron microscopy, x-ray diffraction, Fourier-transform infrared spectroscopy, and differential thermal analysis. The as obtained layers are amorphous; the mean pore size is between 40 nm and 75 nm and increases with the increase of the anodization potential. Well-defined pores across the whole aluminum template, a pore density of ~1010 pores/cm2, and a tendency to form a porous structure with hexagonal symmetry were observed.

  4. Smart templates for peak pattern matching with comprehensive two-dimensional liquid chromatography.

    Science.gov (United States)

    Reichenbach, Stephen E; Carr, Peter W; Stoll, Dwight R; Tao, Qingping

    2009-04-17

    Comprehensive two-dimensional liquid chromatography (LCxLC) generates information-rich but complex peak patterns that require automated processing for rapid chemical identification and classification. This paper describes a powerful approach and specific methods for peak pattern matching to identify and classify constituent peaks in data from LCxLC and other multidimensional chemical separations. The approach records a prototypical pattern of peaks with retention times and associated metadata, such as chemical identities and classes, in a template. Then, the template pattern is matched to the detected peaks in subsequent data and the metadata are copied from the template to identify and classify the matched peaks. Smart Templates employ rule-based constraints (e.g., multispectral matching) to increase matching accuracy. Experimental results demonstrate Smart Templates, with the combination of retention-time pattern matching and multispectral constraints, are accurate and robust with respect to changes in peak patterns associated with variable chromatographic conditions.

  5. Nanoporous Thin Film Templates for the Fabrication of Nanowires and Nanotubes

    DEFF Research Database (Denmark)

    Bordo, Kirill

    2011-01-01

    of nanowires or nanotubes are obtained. Such arrays can be subsequently integrated into e.g. solar cells and other electronic devices. This thesis is focused on the fabrication of thin-film porous anodic alumina (PAA) templates on different substrates. The fabrication of organic nanowires and nanotubes via....... The prepared thin-film PAA templates were directly used for the fabrication of poly(3-hexylthiophene) (P3HT) nanotubes by means of melt-assisted wetting. Different architectures of solar cells based on P3HT nanotube arrays and thin films of PCBM were considered. Additionally, 1D nanostructures from P3HT, poly......The method of template wetting allows one to fabricate highly ordered arrays of upright standing nanowires or nanotubes from different materials in a controllable manner. In this method, a porous template is filled by an appropriate solution or melt. After selective removal of the template, arrays...

  6. The Appropriateness of Language Found in Research Consent Form Templates: A Computational Linguistic Analysis

    Science.gov (United States)

    Kereliuk, Stephanie; Hamlin, Colin; Johnson, Andrea; Jacobsohn, Eric

    2017-01-01

    Background To facilitate informed consent, consent forms should use language below the grade eight level. Research Ethics Boards (REBs) provide consent form templates to facilitate this goal. Templates with inappropriate language could promote consent forms that participants find difficult to understand. However, a linguistic analysis of templates is lacking. Methods We reviewed the websites of 124 REBs for their templates. These included English language medical school REBs in Australia/New Zealand (n = 23), Canada (n = 14), South Africa (n = 8), the United Kingdom (n = 34), and a geographically-stratified sample from the United States (n = 45). Template language was analyzed using Coh-Metrix linguistic software (v.3.0, Memphis, USA). We evaluated the proportion of REBs with five key linguistic outcomes at or below grade eight. Additionally, we compared quantitative readability to the REBs’ own readability standards. To determine if the template’s country of origin or the presence of a local REB readability standard influenced the linguistic variables, we used a MANOVA model. Results Of the REBs who provided templates, 0/94 (0%, 95% CI = 0–3.9%) provided templates with all linguistic variables at or below the grade eight level. Relaxing the standard to a grade 12 level did not increase this proportion. Further, only 2/22 (9.1%, 95% CI = 2.5–27.8) REBs met their own readability standard. The country of origin (DF = 20, 177.5, F = 1.97, p = 0.01), but not the presence of an REB-specific standard (DF = 5, 84, F = 0.73, p = 0.60), influenced the linguistic variables. Conclusions Inappropriate language in templates is an international problem. Templates use words that are long, abstract, and unfamiliar. This could undermine the validity of participant informed consent. REBs should set a policy of screening templates with linguistic software. PMID:28146568

  7. Alignment-free cancelable fingerprint templates based on local minutiae information.

    Science.gov (United States)

    Lee, Chulhan; Choi, Jeung-Yoon; Toh, Kar-Ann; Lee, Sangyoun; Kim, Jaihie

    2007-08-01

    To replace compromised biometric templates, cancelable biometrics has recently been introduced. The concept is to transform a biometric signal or feature into a new one for enrollment and matching. For making cancelable fingerprint templates, previous approaches used either the relative position of a minutia to a core point or the absolute position of a minutia in a given fingerprint image. Thus, a query fingerprint is required to be accurately aligned to the enrolled fingerprint in order to obtain identically transformed minutiae. In this paper, we propose a new method for making cancelable fingerprint templates that do not require alignment. For each minutia, a rotation and translation invariant value is computed from the orientation information of neighboring local regions around the minutia. The invariant value is used as the input to two changing functions that output two values for the translational and rotational movements of the original minutia, respectively, in the cancelable template. When a template is compromised, it is replaced by a new one generated by different changing functions. Our approach preserves the original geometric relationships (translation and rotation) between the enrolled and query templates after they are transformed. Therefore, the transformed templates can be used to verify a person without requiring alignment of the input fingerprint images. In our experiments, we evaluated the proposed method in terms of two criteria: performance and changeability. When evaluating the performance, we examined how verification accuracy varied as the transformed templates were used for matching. When evaluating the changeability, we measured the dissimilarities between the original and transformed templates, and between two differently transformed templates, which were obtained from the same original fingerprint. The experimental results show that the two criteria mutually affect each other and can be controlled by varying the control parameters of

  8. Optimization of the synthesis of SAPO-11 for the methylation of naphthalene with methanol by varying templates and template content

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Xiaoxiao [University of Chinese Academy of Sciences, Beijing (China); Zhang, Wei; Zhao, Liangfu; Xiang, Hongwei, E-mail: zw7234@sxicc.ac.cn, E-mail: lfzhao@sxicc.ac.cn [Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan (China); Guo, Shaoqing [Taiyuan University of Science and Technology, Taiyuan (China)

    2013-07-15

    SAPO-11 zeolites were successfully synthesized by using three different templates (diethylamine (DEA), di-n-propylamine (DPA) and di-isopropylamine (DIPA)) and varying DPA contents (nDPA/Al{sub 2}O{sub 3} = 0.8, 1.2, 1.6 and 2.0) under hydrothermal conditions. The samples were characterized by powder X-ray diffractometry (XRD), scanning electron microscopy (SEM), N{sub 2} adsorption-desorption, temperature programmed desorption of ammonia (NH{sub 3} -TPD) and {sup 29}Si magic angle spinning (MAS) nuclear magnetic resonance (NMR). The samples were also evaluated towards the methylation of naphthalene with methanol to produce 2,6-dimethylnaphthalene (2,6-DMN). XRD results indicated that the directing effect of the different templates for AEL (Aluminophosphate-ELeven) structure decreased in the order DPA > DEA > DIPA and the most suitable DPA content was nDPA/Al{sub 2}O{sub 3} = 1.2. N{sub 2} adsorption-desorption results showed that SAPO-11(DPA,1.2) exhibited the broadest pore size distribution, the highest BET specific surface area and the largest pore volume among all the SAPO-11 samples. SAPO-11(DPA,1.2) exhibited high catalytic performances in the methylation of naphthalene due to its high crystallinity, high external surface and broad pore size distribution. The pore structure of SAPO-11 zeolite, rather than its acidity, played an important role in achieving high catalytic performances in the methylation of naphthalene with methanol. (author)

  9. Investigation of metal hydride nanoparticles templated in metal organic frameworks.

    Energy Technology Data Exchange (ETDEWEB)

    Jacobs, Benjamin W.; Herberg, Julie L. (Lawrence Livermore National Laboratory, Livermore, CA); Highley, Aaron M.; Grossman, Jeffrey (MIT, Cambridge, MA); Wagner, Lucas (MIT, Cambridge, MA); Bhakta, Raghu; Peaslee, D. (University of Missouri, St. Louis, MO); Allendorf, Mark D.; Liu, X. (University of Missouri, St. Louis, MO); Behrens, Richard, Jr.; Majzoub, Eric H. (University of Missouri, St. Louis, MO)

    2010-11-01

    Hydrogen is proposed as an ideal carrier for storage, transport, and conversion of energy. However, its storage is a key problem in the development of hydrogen economy. Metal hydrides hold promise in effectively storing hydrogen. For this reason, metal hydrides have been the focus of intensive research. The chemical bonds in light metal hydrides are predominantly covalent, polar covalent or ionic. These bonds are often strong, resulting in high thermodynamic stability and low equilibrium hydrogen pressures. In addition, the directionality of the covalent/ionic bonds in these systems leads to large activation barriers for atomic motion, resulting in slow hydrogen sorption kinetics and limited reversibility. One method for enhancing reaction kinetics is to reduce the size of the metal hydrides to nano scale. This method exploits the short diffusion distances and constrained environment that exist in nanoscale hydride materials. In order to reduce the particle size of metal hydrides, mechanical ball milling is widely used. However, microscopic mechanisms responsible for the changes in kinetics resulting from ball milling are still being investigated. The objective of this work is to use metal organic frameworks (MOFs) as templates for the synthesis of nano-scale NaAlH4 particles, to measure the H2 desorption kinetics and thermodynamics, and to determine quantitative differences from corresponding bulk properties. Metal-organic frameworks (MOFs) offer an attractive alternative to traditional scaffolds because their ordered crystalline lattice provides a highly controlled and understandable environment. The present work demonstrates that MOFs are stable hosts for metal hydrides and their reactive precursors and that they can be used as templates to form metal hydride nanoclusters on the scale of their pores (1-2 nm). We find that using the MOF HKUST-1 as template, NaAlH4 nanoclusters as small as 8 formula units can be synthesized inside the pores. A detailed picture of

  10. Templated self-assembly of SiGe quantum dots

    Energy Technology Data Exchange (ETDEWEB)

    Dais, Christian

    2009-08-19

    This PhD thesis reports on the fabrication and characterization of exact aligned SiGe quantum dot structures. In general, SiGe quantum dots which nucleate via the Stranski-Krastanov growth mode exhibit broad size dispersion and nucleate randomly on the surface. However, to tap the full potential of SiGe quantum dots it is necessary to control the positioning and size of the dots on a nanometer length, e.g. for electronically addressing of individual dots. This can be realized by so-called templated self-assembly, which combines top-down lithography with bottom-up selfassembly. In this process the lithographically defined pits serve as pre-defined nucleation points for the epitaxially grown quantum dots. In this thesis, extreme ultraviolet interference lithography at a wavelength of e=13.4 nm is employed for prepatterning of the Si substrates. This technique allows the precise and fast fabrication of high-resolution templates with a high degree of reproducibility. The subsequent epitaxial deposition is either performed by molecular beam epitaxy or low-pressure chemical vapour deposition. It is shown that the dot nucleation on pre-patterned substrates depends strongly on the lithography parameters, e.g. size and periodicity of the pits, as well as on the epitaxy parameters, e.g. growth temperature or material coverage. The interrelations are carefully analyzed by means of scanning force microscopy, transmission electron microscopy and X-ray diffraction measurements. Provided that correct template and overgrowth parameters are chosen, perfectly aligned and uniform SiGe quantum dot arrays of different period, size as well as symmetry are created. In particular, the quantum dot arrays with the so far smallest period (35 nm) and smallest size dispersion are fabricated in this thesis. Furthermore, the strain fields of the underlying quantum dots allow the fabrication of vertically aligned quantum dot stacks. Combining lateral and vertical dot alignment results in three

  11. Iron oxide nanotubes synthesized via template-based electrodeposition

    Science.gov (United States)

    Lim, Jin-Hee; Min, Seong-Gi; Malkinski, Leszek; Wiley, John B.

    2014-04-01

    Considerable effort has been invested in the development of synthetic methods for the preparation iron oxide nanostructures for applications in nanotechnology. While a variety of structures have been reported, only a few studies have focused on iron oxide nanotubes. Here, we present details on the synthesis and characterization of iron oxide nanotubes along with a proposed mechanism for FeOOH tube formation. The FeOOH nanotubes, fabricated via a template-based electrodeposition method, are found to exhibit a unique inner-surface. Heat treatment of these tubes under oxidizing or reducing atmospheres can produce either hematite (α-Fe2O3) or magnetite (Fe3O4) structures, respectively. Hematite nanotubes are composed of small nanoparticles less than 20 nm in diameter and the magnetization curves and FC-ZFC curves show superparamagnetic properties without the Morin transition. In the case of magnetite nanotubes, which consist of slightly larger nanoparticles, magnetization curves show ferromagnetism with weak coercivity at room temperature, while FC-ZFC curves exhibit the Verwey transition at 125 K.Considerable effort has been invested in the development of synthetic methods for the preparation iron oxide nanostructures for applications in nanotechnology. While a variety of structures have been reported, only a few studies have focused on iron oxide nanotubes. Here, we present details on the synthesis and characterization of iron oxide nanotubes along with a proposed mechanism for FeOOH tube formation. The FeOOH nanotubes, fabricated via a template-based electrodeposition method, are found to exhibit a unique inner-surface. Heat treatment of these tubes under oxidizing or reducing atmospheres can produce either hematite (α-Fe2O3) or magnetite (Fe3O4) structures, respectively. Hematite nanotubes are composed of small nanoparticles less than 20 nm in diameter and the magnetization curves and FC-ZFC curves show superparamagnetic properties without the Morin transition

  12. Lightning Protection System for HE Facilities at LLNL - Certification Template

    Energy Technology Data Exchange (ETDEWEB)

    Clancy, T J; Ong, M M; Brown, C G

    2005-12-08

    This document is meant as a template to assist in the development of your own lighting certification process. Aside from this introduction and the mock representative name of the building (Building A), this document is nearly identical to a lightning certification report issued by the Engineering Directorate at Lawrence Livermore National Laboratory. At the date of this release, we have certified over 70 HE processing and storage cells at our Site 300 facilities. In Chapters 1 and 2 respectively, we address the need and methods of lightning certification for HE processing and storage facilities at LLNL. We present the preferred method of lightning protection in Chapter 3, as well as the likely building modifications that are needed to comply with this method. In Chapter 4, we present the threat assessment and resulting safe work areas within a cell. After certification, there may be changes to operations during a lightning alert, and this is discussed in Chapter 5. Chapter 6 lists the maintenance requirements for the continuation of lighting certification status. Appendices of this document are meant as an aid in developing your own certification process, and they include a bonding list, an inventory of measurement equipment, surge suppressors in use at LLNL, an Integrated Work and Safety form (IWS), and a template certification sign-off sheet. The lightning certification process involves more that what is spelled out in this document. The first steps involve considerable planning, the securing of funds, and management and explosives safety buy-in. Permits must be obtained, measurement equipment must be assembled and tested, and engineers and technicians must be trained in their use. Cursory building inspections are also recommended, and surge suppression for power systems must be addressed. Upon completion of a certification report and its sign-off by management, additional work is required. Training will be needed in order to educate workers and facility managers

  13. Shaping and patterning gold nanoparticles via micelle templated photochemistry

    Science.gov (United States)

    Kundrat, F.; Baffou, G.; Polleux, J.

    2015-09-01

    Shaping and positioning noble metal nanostructures are essential processes that still require laborious and sophisticated techniques to fabricate functional plasmonic interfaces. The present study reports a simple photochemical approach compatible with micellar nanolithography and photolithography that enables the growth, arrangement and shaping of gold nanoparticles with tuneable plasmonic resonances on glass substrates. Ultraviolet illumination of surfaces coated with gold-loaded micelles leads to the formation of gold nanoparticles with micro/nanometric spatial resolution without requiring any photosensitizers or photoresists. Depending on the extra-micellar chemical environment and the illumination wavelength, block copolymer micelles act as reactive and light-responsive templates, which enable to grow gold deformed nanoparticles (potatoids) and nanorings. Optical characterization reveals that arrays of individual potatoids and rings feature a localized plasmon resonance around 600 and 800 nm, respectively, enhanced photothermal properties and high temperature sustainability, making them ideal platforms for future developments in nanochemistry and biomolecular manipulation controlled by near-infrared-induced heat.Shaping and positioning noble metal nanostructures are essential processes that still require laborious and sophisticated techniques to fabricate functional plasmonic interfaces. The present study reports a simple photochemical approach compatible with micellar nanolithography and photolithography that enables the growth, arrangement and shaping of gold nanoparticles with tuneable plasmonic resonances on glass substrates. Ultraviolet illumination of surfaces coated with gold-loaded micelles leads to the formation of gold nanoparticles with micro/nanometric spatial resolution without requiring any photosensitizers or photoresists. Depending on the extra-micellar chemical environment and the illumination wavelength, block copolymer micelles act as

  14. Synthesis and Characterization of Polymer-Templated Magnetic Nanoparticles

    Science.gov (United States)

    Tamakloe, Beatrice

    This research reports on the investigation into the synthesis and stabilization of iron oxide nanoparticles for theranostic applications using amine-epoxide polymers. Although theranostic agents such as magnetic nanoparticles have been designed and developed for a few decades, there is still more work that needs to be done with the type of materials that can be used to stabilize or functionalize these particles if they are to be used for applications such as drug delivery, imaging and hyperthermia. For in-vivo applications, it is crucial that organic coatings enclose the nanoparticles in order to prevent aggregation and facilitate efficient removal from the body as well as protect the body from toxic material. The objective of this thesis is to design polymer coated magnetite nanoparticles with polymers that are biocompatible and can stabilize the iron oxide nanoparticle to help create mono-dispersed particles in solution. It is desirable to also have these nanoparticles possess high magnetic susceptibility in response to an applied magnetic field. The co-precipitation method was selected because it is probably the simplest and most efficient chemical pathway to obtain magnetic nanoparticles. In literature, cationic polymers such as Polyethylenimine (PEI), which is the industry standard, have been used to stabilize IONPs because they can be used in magnetofections to deliver DNA or RNA. PEI however is known to interact very strongly with proteins and is cytotoxic, so as mentioned previously the Iron Oxide nanoparticles (IONPs) synthesized in this study were stabilized with amine-epoxide polymers because of the limitations of PEI. Four different amine-epoxide polymers which have good water solubility, biodegradability and less toxic than PEI were synthesized and used in the synthesis and stabilization of the magnetic nanoparticles and compared to PEI templated IONPs. These polymer-templated magnetic nanoparticles were also characterized by size, surface charge, Iron

  15. High-performance fabrication process for 2xnm hole-NIL template production

    Science.gov (United States)

    Yagawa, Keisuke; Suenaga, Machiko; Motokawa, Takeharu; Tanabe, Mana; Ando, Akihiko; Yamanaka, Eiji; Morishita, Keiko; Kanamitsu, Shingo; Saito, Masato; Itoh, Masamitsu

    2016-10-01

    UV nano imprint lithography (UV-NIL) has high-throughput and cost-effective for complex nano-scale patterns and is considered as a candidate for next generation lithography tool. In addition, NIL is the unmagnified lithography and contact transfer technique using template. Therefore, the lithography performance depends greatly on the quality of the template pattern. According to ITRS 2013, the minimum half pitch size of Line and Space (LS) pattern will reach 1x nm level within next five years. On the other hand, in hole pattern, half pith of 2x nm level will be required in five years. Pattern shrink rate of hole pattern size is slower than LS pattern, but shot counts increase explosively compared to LS pattern due to its data volume. Therefore, high throughput and high resolution EB lithography process is required. In previous study, we reported the result of hole patterning on master template which has high resolution resist material and etching process. This study indicated the potential for fabricating 2xnm hole master template [1]. After above study, we aim at fabricating the good quality of 2xnm master template which is assured about defect, CD uniformity(CDU), and Image placement(IP). To product high quality master template, we develop not only high resolution patterning process but also high accuracy quality assurance technology. We report the development progress about hole master template production.

  16. A Stochastic Point Cloud Sampling Method for Multi-Template Protein Comparative Modeling

    Science.gov (United States)

    Li, Jilong; Cheng, Jianlin

    2016-01-01

    Generating tertiary structural models for a target protein from the known structure of its homologous template proteins and their pairwise sequence alignment is a key step in protein comparative modeling. Here, we developed a new stochastic point cloud sampling method, called MTMG, for multi-template protein model generation. The method first superposes the backbones of template structures, and the Cα atoms of the superposed templates form a point cloud for each position of a target protein, which are represented by a three-dimensional multivariate normal distribution. MTMG stochastically resamples the positions for Cα atoms of the residues whose positions are uncertain from the distribution, and accepts or rejects new position according to a simulated annealing protocol, which effectively removes atomic clashes commonly encountered in multi-template comparative modeling. We benchmarked MTMG on 1,033 sequence alignments generated for CASP9, CASP10 and CASP11 targets, respectively. Using multiple templates with MTMG improves the GDT-TS score and TM-score of structural models by 2.96–6.37% and 2.42–5.19% on the three datasets over using single templates. MTMG’s performance was comparable to Modeller in terms of GDT-TS score, TM-score, and GDT-HA score, while the average RMSD was improved by a new sampling approach. The MTMG software is freely available at: http://sysbio.rnet.missouri.edu/multicom_toolbox/mtmg.html. PMID:27161489

  17. Magnetic properties of Ni-Fe nanowire arrays: effect of template material and deposition conditions

    Energy Technology Data Exchange (ETDEWEB)

    Singleton, John [Los Alamos National Laboratory; Aravamudhan, Shyan [U OF SOUTH FL; Goddard, Paul A [U OF OXFORD; Bhansali, Shekhar [U OF SOUTH FL

    2008-01-01

    The objective of this work is to study the magnetic properties of arrays of Ni-Fe nanowires electrodeposited in different template materials such as porous silicon, polycarbonate and alumina. Magnetic properties were studied as a function of template material, applied magnetic field (parallel and perpendicular) during deposition, wire length, as well as magnetic field orientation during measurement. The results show that application of magnetic field during deposition strongly influences the c-axis preferred orientation growth of Ni-Fe nanowires. The samples with magnetic field perpendicular to template plane during deposition exhibits strong perpendicular anisotropy with greatly enhanced coercivity and squareness ratio, particularly in Ni-Fe nanowires deposited in polycarbonate templates. In case of polycarbonate template, as magnetic field during deposition increases, both coercivity and squareness ratio also increase. The wire length dependence was also measured for polycarbonate templates. As wire length increases, coercivity and squarness ratio decrease, but saturation field increases. Such magnetic behavior (dependence on template material, magnetic field, wire length) can be qualitatively explained by preferential growth phenomena, dipolar interactions among nanowires, and perpendicular shape anisotropy in individual nanowires.

  18. A SCHEME FOR TEMPLATE SECURITY AT FEATURE FUSION LEVEL IN MULTIMODAL BIOMETRIC SYSTEM

    Directory of Open Access Journals (Sweden)

    Arvind Selwal

    2016-09-01

    Full Text Available Biometric is the science of human recognition based upon using their biological, chemical or behavioural traits. These systems are used in many real life applications simply from biometric based attendance system to providing security at very sophisticated level. A biometric system deals with raw data captured using a sensor and feature template extracted from raw image. One of the challenges being faced by designers of these systems is to secure template data extracted from the biometric modalities of the user and protect the raw images. To minimize spoof attacks on biometric systems by unauthorised users one of the solutions is to use multi-biometric systems. Multi-modal biometric system works by using fusion technique to merge feature templates generated from different modalities of the human. In this work a new scheme is proposed to secure template during feature fusion level. Scheme is based on union operation of fuzzy relations of templates of modalities during fusion process of multimodal biometric systems. This approach serves dual purpose of feature fusion as well as transformation of templates into a single secured non invertible template. The proposed technique is cancelable and experimentally tested on a bimodal biometric system comprising of fingerprint and hand geometry. Developed scheme removes the problem of an attacker learning the original minutia position in fingerprint and various measurements of hand geometry. Given scheme provides improved performance of the system with reduction in false accept rate and improvement in genuine accept rate.

  19. Effects of Template Contents on the Physicochemical Sorption Properties of Zr—Incorporated Mesoporous Titania Materials

    Institute of Scientific and Technical Information of China (English)

    郑金玉; 丘坤元; 危岩

    2002-01-01

    Zr-Incorporated mesoporous titania materials were prepared via nonsurfactant templated sol-gel process of zirconium(IV) butoxide(ZBT) and titanium(IV) butoxide(TBT) in the presence of urea molecules as template or pore forming agent.The effcets of template contents on the pore parameters of the materials synthesized with fixed Zr incorporation contents were investigated by mitrogen adsorption-desrption measurements,powder X-ray diffraction(XRD) study and transmission electron microscopy(TEM).The changes of template contents play significant roles on the pore parameters at low incorporsation content of Zr.The pore diameters display a clear increase tendency with the increase of template contents.When high Zr incorporation content is used,the template contents have less effect on the pore diameters that almost keep unchanged with the increase of template contents.All the materials possess type IV isotherms with H2 hysteresis loops suggesting the formation of mesophase.The materials with low Zr incorporation content have anatase structures;however,it can not be found in the materials with high Zr incorporation content.TEM images show that some accumulated inter-particulate pores and welldistributed worm-like pores are present in the Zr-incorporated materials.

  20. Vernier templating and synthesis of a 12-porphyrin nano-ring.

    Science.gov (United States)

    O'Sullivan, Melanie C; Sprafke, Johannes K; Kondratuk, Dmitry V; Rinfray, Corentin; Claridge, Timothy D W; Saywell, Alex; Blunt, Matthew O; O'Shea, James N; Beton, Peter H; Malfois, Marc; Anderson, Harry L

    2011-01-06

    Templates are widely used to arrange molecular components so they can be covalently linked into complex molecules that are not readily accessible by classical synthetic methods. Nature uses sophisticated templates such as the ribosome, whereas chemists use simple ions or small molecules. But as we tackle the synthesis of larger targets, we require larger templates-which themselves become synthetically challenging. Here we show that Vernier complexes can solve this problem: if the number of binding sites on the template, n(T), is not a multiple of the number of binding sites on the molecular building blocks, n(B), then small templates can direct the assembly of relatively large Vernier complexes where the number of binding sites in the product, n(P), is the lowest common multiple of n(B) and n(T) (refs 8, 9). We illustrate the value of this concept for the covalent synthesis of challenging targets by using a simple six-site template to direct the synthesis of a 12-porphyrin nano-ring with a diameter of 4.7 nm, thus establishing Vernier templating as a powerful new strategy for the synthesis of large monodisperse macromolecules.

  1. Template reporting matters--a nationwide study on histopathology reporting on colorectal carcinoma resections.

    Science.gov (United States)

    Haugland, Hans Kristian; Casati, Bettina; Dørum, Liv Marit; Bjugn, Roger

    2011-01-01

    Complete and accurate histopathology reports are fundamental in providing quality cancer care. The Cancer Registry of Norway and the Norwegian Society of Pathology have previously developed a national electronic template for histopathology reporting on colorectal carcinoma resection specimens. The present study was undertaken to investigate (1) whether quality routines in Norwegian pathology laboratories might affect completeness of such histopathology reports and (2) whether the national electronic template improves completeness of histopathology reports compared with other modes of reporting. A questionnaire on quality routines was sent to the 21 pathology laboratories in Norway. All histopathology reports on colorectal cancer submitted to the Cancer Registry for a 3-month period in the autumn of 2007 were then evaluated on the mode of reporting and the presence of 11 key parameters. Of the 20 laboratories that handled resection specimens, 16 had written guidelines on histopathology reporting. Of these, 4 used the national electronic template, 5 used checklists, 3 used locally developed electronic templates, whereas the remaining 4 had neither obligatory checklists nor templates. Of the 650 histopathology reports submitted to the Cancer Registry in the 3-month period, the national template had been used in 170 cases (26.2%), checklists/locally developed templates in 112 cases (17.2%), and free text in 368 cases (56.6%). Quality routines in the pathology laboratories clearly governed reporting practice and the completeness of the histopathology reports. Use of the national electronic template significantly improved (P < .05) the presence of the 11 key parameters compared with reporting by checklists, locally developed electronic templates, or free text.

  2. DSA template optimization for contact layer in 1D standard cell design

    Science.gov (United States)

    Xiao, Zigang; Du, Yuelin; Tian, Haitong; Wong, Martin D. F.; Yi, He; Wong, H.-S. Philip

    2014-03-01

    At the 7 nm technology node, the contact layers of integrated circuits (IC) are too dense to be printed by single exposure lithography. Block copolymer directed self-assembly (DSA) has shown its advantage in contact/via patterning with high throughput and low cost. To pattern contacts with DSA, guiding templates are usually printed first with conventional lithography, e.g., 193 nm immersion lithography (193i) that has a coarser pitch resolution. Contact holes are then patterned with DSA process. The guiding templates play the role of controlling the DSA patterns inside, which have a finer resolution than the templates. The DSA contact pitch depends on the chemical property of block copolymer and it can be adjusted within a certain range under strong lateral confinement to deviate from the natural pitch. As a result, different patterns can be obtained through different parameters. Although the guiding template shapes can be arbitrary, the overlay accuracy of the contact holes patterned are different and largely depend on the templates. Thus, the guiding templates that have tolerable variations are considered as feasible, and those have large overlays are considered as infeasible. To pattern the contact layer in a layout with DSA technology, we must ensure that all the DSA templates in the layout are feasible. However, the original layout may not be designed in a DSA-friendly way. Moreover, the routing process may introduce contacts that can only be patterned by infeasible templates. In this paper, we propose an optimization algorithm that optimize the contact layer for DSA patterning in 1D standard cell design. In particular, the algorithm modifies the layout via wire permutation technique to redistribute the contacts such that the use of infeasible templates is avoided and the feasible patterns that with better overlay control are favored. The experimental result demonstrate the ability of the proposed algorithm in helping to reduce the design and manufacturing

  3. Selection of appropriate template for spatial normalization of brain images: tensor based morphometry

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Sung; Lee, Dong Soo; Kim, Yu Kyeong; Chung, June Key; Lee, Myung Chul [College of Medicine, Seoul National University, Seoul (Korea, Republic of)

    2004-07-01

    Although there have been remarkable advances in spatial normalization techniques, the differences in the shape of the hemispheres and the sulcal pattern of brains relative to age, gender, races, and diseases cannot be fully overcome by the nonlinear spatial normalization techniques. T1 SPGR MR images in 16 elderly male normal volunteers (>55 y. mean age: = 61.8 {+-} 3.5 y) were spatially normalized onto the age/gender specific Korean templates, and the Caucasian MNI template and the extent of the deformations were compared. These particular subjects were never included in the development of the templates. First , the images were matched into the templates using an affine transformation to eliminate the global difference between the templates and source images. Second the affine registration was followed by an estimation of nonlinear deformation. Determinants of the Jacobian matrices of the nonlinear deformation were then calculated for every voxel to estimate the regional volume change during the nonlinear transformation Jacobian determinant images highlighted the great magnitude of the relative local volume changes obtained when the elderly brains were spatially normalized onto the young/midlife male or female templates. They reflect the enlargement of CSF space in the lateral ventricles, sylvian fissures and cisterna magna, and the shrinkage of the cortex noted mainly in frontal, insular and lateral temporal cortexes, and the cerebellums in the aged brains. In the Jacobian determinant images, a regional shrinkage of the brain in the left middle prefrontal cortex was observed in addition to the regional expansion in the ventricles and sylvian fissures, which may be due to the age differences between the template and source images. The regional anatomical difference between template and source images could impose an extreme deformation of the source images during the spatial normalization and therefore. Individual brains should be placed into the appropriate

  4. A Multiple Classifier Fusion Algorithm Using Weighted Decision Templates

    Directory of Open Access Journals (Sweden)

    Aizhong Mi

    2016-01-01

    Full Text Available Fusing classifiers’ decisions can improve the performance of a pattern recognition system. Many applications areas have adopted the methods of multiple classifier fusion to increase the classification accuracy in the recognition process. From fully considering the classifier performance differences and the training sample information, a multiple classifier fusion algorithm using weighted decision templates is proposed in this paper. The algorithm uses a statistical vector to measure the classifier’s performance and makes a weighed transform on each classifier according to the reliability of its output. To make a decision, the information in the training samples around an input sample is used by the k-nearest-neighbor rule if the algorithm evaluates the sample as being highly likely to be misclassified. An experimental comparison was performed on 15 data sets from the KDD’99, UCI, and ELENA databases. The experimental results indicate that the algorithm can achieve better classification performance. Next, the algorithm was applied to cataract grading in the cataract ultrasonic phacoemulsification operation. The application result indicates that the proposed algorithm is effective and can meet the practical requirements of the operation.

  5. The Physics of Amyloid Aggregation and Templating in Prions

    Science.gov (United States)

    Cox, Daniel

    2012-02-01

    The problem of self-assembled amyloid aggregation of proteins in structures with beta-strands perpendicular to a one dimensional grown axis is interesting at a fundamental level (is this the most generic end state of proteins?), from a biological level (if the self-assembly can be regulated it is of use in contexts like spider silk and bacterial colony formation), for human public health (aggregation unregulated induces diseases like mad cow and Alzheimer's), and for possible materials applications (e.g., in tissue scaffolding). In this presentation, I will review the work of my group in examining the possibility that the left-handed beta helix (LHBH) structure can be the building block of the aggregates of mammalian prion and yeast prion proteins. I will also discuss our efforts to assess the possibility of a novel pH driven structural switch between LHBH and alpha-helical forms in the ordered half of the mammalian prion protein, and now the possibly pH stabilized LHBH structure can template aggregate growth of the disordered half of the protein, identified in numerous experimental studies as most relevant to disease.

  6. Template fabrication of highly ordered arrays of organic semiconductor nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Heckel, Christian; Ostendorp, Stefan; Lei, Yong; Wilde, Gerhard [Institut fuer Materialphysik, Muenster (Germany)

    2011-07-01

    Porous alumina membrane (PAM) is a widely used template for the fabrication of highly ordered arrays of one-dimensional (1D) nanostructures. The structural parameters of the PAMs are adjustable, including the pore diameter and spacing, and the thickness of the membranes. And thus the structures of the 1D nanomaterials prepared using PAMs can be controlled. On the other hand, the investigation of organic semiconductors opens a new field of applications in computer technology like twistable displays or printing integrated circuits. In the current work, these two technologies are combined by depositing organic n-type semiconductors into the pores of PAMs using different synthesizing processes such as molecular evaporation and solution-phase self-assembly. As a result, highly ordered arrays of organic semiconducting wires are obtained within the pores with a diameter of about 50 nm, which indicates that it is possible to fill the pores with organic materials.The properties of these ''filled'' membranes are characterized by measuring the electrical properties of several nanowires pooled together and also of single nanowires by AFM-based methods.

  7. Stretchable Conductive Networks of Carbon Nanotubes Using Plasticised Colloidal Templates

    Directory of Open Access Journals (Sweden)

    Patnarin eWorajittiphon

    2015-03-01

    Full Text Available We present a study of the behavior of highly ordered, segregated single-wall carbon nanotube networks under applied strain. Polymer latex templates induce self-assembly of carbon nanotubes into hexagonal (2D and honeycomb (3D networks within the matrix. Using mechanical and spectroscopic analysis, we have studied the strain transfer mechanisms between the carbon nanotube network and the polymer matrix. Axial deformation of the nanotube network under applied strain is indicated by downshifts in the 2D mode in the Raman spectra, as well as variation in the Radial Breathing modes. The slippage within nanotube bundles at high strain is indicated by a reduction in the 2D mode rate of change. The fractional resistance change of the composites with strain obeys power law dependence. We present a model for the behavior of carbon nanotube bundles under strain informed by these measurements, and potential applications for such composite materials in elastic electronic devices that can tolerate high strain.

  8. A template for non-religious-based discussions against euthanasia.

    Science.gov (United States)

    Bloodworth, Melissa; Bloodworth, Nathaniel; Ely, E Wesley

    2015-02-01

    We submit this manuscript as part of the ongoing conversation in society at large about physician-assisted death (PAD) and euthanasia. This outlines an approach used by lay healthcare professionals in arguing against PAD/euthanasia during a 1-hour debate conducted on a secular medical school campus. We have included the elements chosen for the "con" side of the argument (i.e., against PAD) by the medical students and attending physician. The goal of this manuscript is to provide a focused and pithy template upon which to build an approach that honors the dignity of life in all circumstances. Lay summary: The discussion over physician assisted death and euthanasia remains ongoing in secular academic medical institutions across the United States and much of the western world. These debates have incentivized efforts to develop a framework for arguments against Euthanasia that will find traction in an environment generally hostile to religion and religious thought. In this essay, we present arguments given by the "con" side in a student-led debate over physician assisted death and euthanasia at Vanderbilt University with the hope that they will provide a foundation for future discussions promoting truth and life without alienating our secular colleagues.

  9. Hollow ZIF-8 Nanoworms from Block Copolymer Templates

    Science.gov (United States)

    Yu, Haizhou; Qiu, Xiaoyan; Neelakanda, Pradeep; Deng, Lin; Khashab, Niveen M.; Nunes, Suzana P.; Peinemann, Klaus-Viktor

    2015-10-01

    Recently two quite different types of “nano-containers” have been recognized as attractive potential drug carriers; these are wormlike filamenteous micelles (“filomicelles”) on the one hand and metal organic frameworks on the other hand. In this work we combine these two concepts. We report for the first time the manufacturing of metal organic framework nanotubes with a hollow core. These worm-like tubes are about 200 nm thick and several μm long. The preparation is simple: we first produce long and flexible filament-shaped micelles by block copolymer self-assembly. These filomicelles serve as templates to grow a very thin layer of interconnected ZIF-8 crystals on their surface. Finally the block copolymer is removed by solvent extraction and the hollow ZIF-8 nanotubes remain. These ZIF-NTs are surprisingly stable and withstand purification by centrifugation. The synthesis method is straightforward and can easily be applied for other metal organic framework materials. The ZIF-8 NTs exhibit high loading capacity for the model anti cancer drug doxorubicin (DOX) with a pH-triggered release. Hence, a prolonged circulation in the blood stream and a targeted drug release behavior can be expected.

  10. Bicontinuous Porous Carbon Films Templated with ABC Triblock Copolymers

    Science.gov (United States)

    Cavicchi, Kevin; Deng, Guodong; Vogt, Bryan

    2014-03-01

    Mesoporous carbons are useful for a range of applications such as separation and catalysis. A route to prepare porous materials is through cooperative self-assembly of a carbon precursor (e.g. phenolic resin) and a block copolymer, in which the precursor is selectively soluble, to drive mesophase formation. Typical soft templating uses AB or ABA block copolymers, which form classical morphologies, such as spheres, cylinders, and lamellae. Switching to an ABC type block copolymer provides greater flexibility in the design of the morphology potentially opening up larger processing windows for complex structures, such as bicontinuous morphologies. This presentation will discuss efforts to prepare bicontinuous porous carbon thin films using an ABC triblock copolymer of poly(ethylene oxide)-block-poly(ethyl acrylate)-block-polystyrene via spin-coating and a series of thermal annealing steps. It will be shown that direct thermal annealing can produce high porosity (~60%) carbon fiber networks. In addition, adding a solvent annealing step prior to the thermal annealing steps is able to produce longer range order structures with a small window of an ordered bicontinuous morphology. These high porosity films with organized fibers are promising for energy and separation applications.

  11. Fabrication of highly uniform conductive polypyrrole nanowires with DNA template.

    Science.gov (United States)

    Moon, Hock Key; Kim, Hyung Jin; Kim, Nam-Hoon; Roh, Yonghan

    2010-05-01

    Deoxyribonucleic acid (DNA) is considered as one of the alternative materials for electronic device applications; however, DNA has critical limitation to electronic device applications due to its low electrical conductivity and unreliability. Therefore, it is required for electronic devices to prepare the well defined conductive polymer nanowires with DNA as a template. Polypyrrole (PPy) is an attractive polymer due to its high conductivity and environmental stability in bulk; although it is well known that ammonium persulfate (APS) used for the polymerization of pyrrole causes the deformation of DNA molecules. We minimized the damage of immobilized DNA strands on (3-aminopropyl) triethoxysilane (APTES) modified silicon wafer during APS polymerization. Atomic force microscopy (AFM) images from different APS treatment times and from using the vortex process obviously showed the effect on the synthesis of individual and continuous polypyrrole nanowires (PPy NWs). The PPy NWs at various pyrrole concentrations had similar height; however, the higher concentration gave more residues. Fourier transform-infrared spectroscopy (FT-IR) spectroscopy provided the strong evidence that PPy NWs were successfully synthesized on the DNA strands.

  12. Hollow ZIF-8 Nanoworms from Block Copolymer Templates

    KAUST Repository

    Yu, Haizhou

    2015-10-16

    Recently two quite different types of “nano-containers” have been recognized as attractive potential drug carriers; these are wormlike filamenteous micelles (“filomicelles”) on the one hand and metal organic frameworks on the other hand. In this work we combine these two concepts. We report for the first time the manufacturing of metal organic framework nanotubes with a hollow core. These worm-like tubes are about 200 nm thick and several μm long. The preparation is simple: we first produce long and flexible filament-shaped micelles by block copolymer self-assembly. These filomicelles serve as templates to grow a very thin layer of interconnected ZIF-8 crystals on their surface. Finally the block copolymer is removed by solvent extraction and the hollow ZIF-8 nanotubes remain. These ZIF-NTs are surprisingly stable and withstand purification by centrifugation. The synthesis method is straightforward and can easily be applied for other metal organic framework materials. The ZIF-8 NTs exhibit high loading capacity for the model anti cancer drug doxorubicin (DOX) with a pH-triggered release. Hence, a prolonged circulation in the blood stream and a targeted drug release behavior can be expected.

  13. Using templates and linguistic patterns to define process performance indicators

    Science.gov (United States)

    del-Río-Ortega, Adela; Resinas, Manuel; Durán, Amador; Ruiz-Cortés, Antonio

    2016-02-01

    Process performance management (PPM) aims at measuring, monitoring and analysing the performance of business processes (BPs), in order to check the achievement of strategic and operational goals and to support decision-making for their optimisation. PPM is based on process performance indicators (PPIs), so having an appropriate definition of them is crucial. One of the main problems of PPIs definition is to express them in an unambiguous, complete, understandable, traceable and verifiable manner. In practice, PPIs are defined informally - usually in ad hoc, natural language, with its well-known problems - or they are defined from an implementation perspective, hardly understandable to non-technical people. In order to solve this problem, in this article we propose a novel approach to improve the definition of PPIs using templates and linguistic patterns. This approach promotes reuse, reduces both ambiguities and missing information, is understandable to all stakeholders and maintains traceability with the process model. Furthermore, it enables the automated processing of PPI definitions by its straightforward translation into the PPINOT metamodel, allowing the gathering of the required information for their computation as well as the analysis of the relationships between them and with BP elements.

  14. An extinction curve template for intrinsically reddened quasars

    CERN Document Server

    Zafar, Tayyaba; Watson, Darach; Fynbo, Johan P U; Krogager, Jens-Kristian; Zafar, Nosheen; Saturni, Francesci G; Geier5, Stefan; Venemans, Bram P

    2015-01-01

    We analyze the near-infrared to UV data of 16 quasars with redshifts ranging from 0.71 $<$ $z$ $<$ 2.13 to investigate dust extinction properties. The sample presented in this work is obtained from the High $A_V$ Quasar (HAQ) survey. The quasar candidates were selected from the Sloan Digital Sky Survey (SDSS) and the UKIRT Infrared Deep Sky Survey (UKIDSS), and follow-up spectroscopy was carried out at the Nordic Optical Telescope (NOT) and the New Technology Telescope (NTT). To study dust extinction curves intrinsic to the quasars, from the HAQ survey we selected 16 cases where the Small Magellanic Cloud (SMC) law could not provide a good solution to the spectral energy distributions (SEDs). We derived the extinction curves using Fitzpatrick & Massa 1986 (FM) law by comparing the observed SEDs to the combined quasar template from Vanden Berk et al. 2001 and Glikman et al. 2006. The derived extinction, $A_V$, ranges from 0.2-1.0 mag. All the individual extinction curves of our quasars are steeper ($...

  15. A Template for an Intensive Ecohydrology Field Course

    Science.gov (United States)

    Emanuel, R. E.; McGlynn, B. L.; Riveros-Iregui, D. A.

    2014-12-01

    Many of the greatest challenges in the earth and environmental sciences are complex and interdisciplinary in nature. Ecohydrology exemplifies the type of holistic inquiry needed to address these challenges because it spans and integrates earth science, biological science and, often, social science. Ecohydrology courses can prepare the next generation of scientists, decision-makers and informed citizens to understand and address these challenges, and field courses in particular can play an important role in this preparation. Ecohydrology field course instructors have unique opportunities to convey interwoven theoretical and applied principles through a variety of modes that include lecture, discussion, immersion, and hands-on activity. In this presentation, we report on our experience co-teaching the Mountain Ecohydrology Field Course, a full-credit course taught 3 times in the past 5 years to more than 30 students representing 6 universities. The course, which has ranged from 1-2 weeks in length, has given students in-depth exposure to intensively instrumented ecohydrological field sites in the southern Appalachian and northern Rocky Mountains. Students learn fundamental principles in ecohydrology and related fields of watershed hydrology, soil biogeochemistry, micrometeorology and plant ecophysiology. They gain hands-on experience in a variety of cutting edge field techniques, tools and analyses while practicing presentation and communication of science. Students and instructors deal with real-world challenges of conducting fieldwork in remote settings. We offer our experience as one potential template for others interested in developing or refining ecohydrology field courses elsewhere.

  16. Template-stripped asymmetric metallic pyramids for tunable plasmonic nanofocusing.

    Science.gov (United States)

    Cherukulappurath, Sudhir; Johnson, Timothy W; Lindquist, Nathan C; Oh, Sang-Hyun

    2013-01-01

    We demonstrate a novel scheme for plasmonic nanofocusing with internally illuminated asymmetric metallic pyramidal tips using linearly polarized light. A wafer-scale array of sharp metallic pyramids is fabricated via template stripping with films of different thicknesses on opposing pyramid facets. This structural asymmetry is achieved through a one-step angled metal deposition that does not require any additional lithography processing and when internally illuminated enables the generation of plasmons using a Kretschmann-like coupling method on only one side of the pyramids. Plasmons traveling toward the tip on one side will converge at the apex, forming a nanoscale "hotspot." The asymmetry is necessary for these focusing effects since symmetric pyramids display destructive plasmon interference at the tip. Computer simulations confirm that internal illumination with linearly polarized light at normal incidence on these asymmetric pyramids will focus optical energy into nanoscale volumes. Far-field optical experiments demonstrate large field enhancements as well as angle-dependent spectral tuning of the reradiated light. Because of the low background light levels, wafer-scale fabrication, and a straightforward excitation scheme, these asymmetric pyramidal tips will find applications in near-field optical microscopy and array-based optical trapping.

  17. Electrodeposition of gold templated by patterned thiol monolayers

    Science.gov (United States)

    She, Zhe; Di Falco, Andrea; Hähner, Georg; Buck, Manfred

    2016-06-01

    The electrochemical deposition of Au onto Au substrates modified by self-assembled monolayers (SAMs) was studied by linear sweep voltammetry (LSV), atomic force microscopy (AFM) and scanning electron microscopy (SEM). Patterned SAMs exhibiting electrochemical contrast were prepared by two different methods. One used microcontact printing (μCP) to generate a binary SAM of ω-(4‧-methyl-biphenyl-4-yl)-propane thiol (CH3-C6H4-C6H4-(CH2)3-SH, MBP3) and octadecane thiol (CH3(CH2)17SH, ODT). Templated by the SAM, a gold microelectrode structure was electrodeposited featuring a line 15 μm wide and 3 mm long. After transfer to an epoxy substrate the structure proved to be electrically conductive across the full length. The other patterning method applied electron beam lithography (EBL) where electrochemical contrast was achieved by crosslinking molecules in a single component SAM of MBP3. An electron dose above 250 mC/cm2 results in a high deposition contrast. The choice of parameters for the deposition/lift-off process is found to be more critical for Au compared to Cu studied previously. The origin of the differences and implications for nanoscale patterning are discussed.

  18. Soft-Template-Synthesized Mesoporous Carbon for Oral Drug Delivery

    Energy Technology Data Exchange (ETDEWEB)

    Saha, Dipendu [ORNL; Warren, Kaitlyn E [ORNL; Naskar, Amit K [ORNL

    2014-01-01

    Template-synthesized mesoporous carbons were successfully used in in vitro investigations of controlled delivery of three model drugs, captopril, furosemide, and ranitidine hydrochloride. Captopril and furosemide exhibited desorption kinetics over 30 40 h, and ranitidine HCl had a complete release time of 5 10 h. As evident from the slow release kinetics, we contend that our mesoporous carbon is an improved drug-delivery medium compared to state-of-the-art porous silica-based substrates. The mesoporous carbons, synthesized from phloroglucinol and lignin, a synthetic and a sustainable precursor, respectively, exhibit BET surface area of 200 400 m2 g-1 and pore volume of 0.2 0.6 cm3 g-1. The phloroglucinol-based carbon has narrower pore widths and higher pore volume than the lignin-derived counterpart and maintains a longer release time. Numerical modeling of the release kinetics data reveals that the diffusivities of all the drugs from lignin-based carbon media are of equivalent magnitude (10-22 to 10-24 m2 s-1). However, a tailored reduction of pore width in the sorbent reduces the diffusivity of smaller drug molecules (captopril) by an order of magnitude. Thus, engineered pore morphology in our synthesized carbon sorbent, along with its potential to tailor the chemistry of its interaction with sorbet, can be exploited for optimal delivery system of a preferred drug within its therapeutic level and below the level of toxicity.

  19. Template-Assisted Synthesis and Characterization of Passivated Nickel Nanoparticles

    Directory of Open Access Journals (Sweden)

    Al-Omari IA

    2010-01-01

    Full Text Available Abstract Potential applications of nickel nanoparticles demand the synthesis of self-protected nickel nanoparticles by different synthesis techniques. A novel and simple technique for the synthesis of self-protected nickel nanoparticles is realized by the inter-matrix synthesis of nickel nanoparticles by cation exchange reduction in two types of resins. Two different polymer templates namely strongly acidic cation exchange resins and weakly acidic cation exchange resins provided with cation exchange sites which can anchor metal cations by the ion exchange process are used. The nickel ions which are held at the cation exchange sites by ion fixation can be subsequently reduced to metal nanoparticles by using sodium borohydride as the reducing agent. The composites are cycled repeating the loading reduction cycle involved in the synthesis procedure. X-Ray Diffraction, Scanning Electron Microscopy, Transmission Electron microscopy, Energy Dispersive Spectrum, and Inductively Coupled Plasma Analysis are effectively utilized to investigate the different structural characteristics of the nanocomposites. The hysteresis loop parameters namely saturation magnetization and coercivity are measured using Vibrating Sample Magnetometer. The thermomagnetization study is also conducted to evaluate the Curie temperature values of the composites. The effect of cycling on the structural and magnetic characteristics of the two composites are dealt in detail. A comparison between the different characteristics of the two nanocomposites is also provided.

  20. Defect reduction of patterned media templates and disks

    Science.gov (United States)

    Luo, Kang; Ha, Steven; Fretwell, John; Ramos, Rick; Ye, Zhengmao; Schmid, Gerard; LaBrake, Dwayne; Resnick, Douglas J.; Sreenivasan, S. V.

    2010-05-01

    Imprint lithography has been shown to be an effective technique for the replication of nano-scale features. Acceptance of imprint lithography for manufacturing will require a demonstration of defect levels commensurate with cost-effective device production. This work summarizes the results of defect inspections of hard disks patterned using Jet and Flash Imprint Lithography (J-FILTM). Inspections were performed with optical based automated inspection tools. For the hard drive market, it is important to understand the defectivity of both the template and the imprinted disk. This work presents a methodology for automated pattern inspection and defect classification for imprint-patterned media. Candela CS20 and 6120 tools from KLA-Tencor map the optical properties of the disk surface, producing highresolution grayscale images of surface reflectivity and scattered light. Defects that have been identified in this manner are further characterized according to the morphology. The imprint process was tested after optimizing both the disk cleaning and adhesion layers processes that precede imprinting. An extended imprint run was performed and both the defect types and trends are reported.

  1. Vacuum template synthesis of multifunctional nanotubes with tailored nanostructured walls

    Science.gov (United States)

    Filippin, A. Nicolas; Macias-Montero, Manuel; Saghi, Zineb; Idígoras, Jesús; Burdet, Pierre; Barranco, Angel; Midgley, Paul; Anta, Juan A.; Borras, Ana

    2016-02-01

    A three-step vacuum procedure for the fabrication of vertical TiO2 and ZnO nanotubes with three dimensional walls is presented. The method combines physical vapor deposition of small-molecules, plasma enhanced chemical vapor deposition of inorganic functional thin films and layers and a post-annealing process in vacuum in order to remove the organic template. As a result, an ample variety of inorganic nanotubes are made with tunable length, hole dimensions and shapes and tailored wall composition, microstructure, porosity and structure. The fabrication of multishell nanotubes combining different semiconducting oxides and metal nanoparticles is as well explored. This method provides a feasible and reproducible route for the fabrication of high density arrays of vertically alligned nanotubes on processable substrates. The emptying mechanism and microstructure of the nanotubes have been elucidated through SEM, STEM, HAADF-STEM tomography and energy dispersive X-ray spectroscopy. In this article, as a proof of concept, it is presented the straightforward integration of ZnO nanotubes as photoanode in a photovoltaic cell and as a photonic oxygen gas sensor.

  2. Trees as templates for tropical litter arthropod diversity.

    Science.gov (United States)

    Donoso, David A; Johnston, Mary K; Kaspari, Michael

    2010-09-01

    Increased tree species diversity in the tropics is associated with even greater herbivore diversity, but few tests of tree effects on litter arthropod diversity exist. We studied whether tree species influence patchiness in diversity and abundance of three common soil arthropod taxa (ants, gamasid mites, and oribatid mites) in a Panama forest. The tree specialization hypothesis proposes that tree-driven habitat heterogeneity maintains litter arthropod diversity. We tested whether tree species differed in resource quality and quantity of their leaf litter and whether more heterogeneous litter supports more arthropod species. Alternatively, the abundance-extinction hypothesis states that arthropod diversity increases with arthropod abundance, which in turn tracks resource quantity (e.g., litter depth). We found little support for the hypothesis that tropical trees are templates for litter arthropod diversity. Ten tree species differed in litter depth, chemistry, and structural variability. However, the extent of specialization of invertebrates on particular tree taxa was low and the more heterogeneous litter between trees failed to support higher arthropod diversity. Furthermore, arthropod diversity did not track abundance or litter depth. The lack of association between tree species and litter arthropods suggests that factors other than tree species diversity may better explain the high arthropod diversity in tropical forests.

  3. Template matching method for the analysis of interstellar cloud structure

    CERN Document Server

    Juvela, M

    2016-01-01

    The structure of interstellar medium can be characterised at large scales in terms of its global statistics (e.g. power spectra) and at small scales by the properties of individual cores. Interest has been increasing in structures at intermediate scales, resulting in a number of methods being developed for the analysis of filamentary structures. We describe the application of the generic template-matching (TM) method to the analysis of maps. Our aim is to show that it provides a fast and still relatively robust way to identify elongated structures or other image features. We present the implementation of a TM algorithm for map analysis. The results are compared against rolling Hough transform (RHT), one of the methods previously used to identify filamentary structures. We illustrate the method by applying it to Herschel surface brightness data. The performance of the TM method is found to be comparable to that of RHT but TM appears to be more robust regarding the input parameters, for example, those related t...

  4. The development of a reliable amateur boxing performance analysis template.

    Science.gov (United States)

    Thomson, Edward; Lamb, Kevin; Nicholas, Ceri

    2013-01-01

    The aim of this study was to devise a valid performance analysis system for the assessment of the movement characteristics associated with competitive amateur boxing and assess its reliability using analysts of varying experience of the sport and performance analysis. Key performance indicators to characterise the demands of an amateur contest (offensive, defensive and feinting) were developed and notated using a computerised notational analysis system. Data were subjected to intra- and inter-observer reliability assessment using median sign tests and calculating the proportion of agreement within predetermined limits of error. For all performance indicators, intra-observer reliability revealed non-significant differences between observations (P > 0.05) and high agreement was established (80-100%) regardless of whether exact or the reference value of ±1 was applied. Inter-observer reliability was less impressive for both analysts (amateur boxer and experienced analyst), with the proportion of agreement ranging from 33-100%. Nonetheless, there was no systematic bias between observations for any indicator (P > 0.05), and the proportion of agreement within the reference range (±1) was 100%. A reliable performance analysis template has been developed for the assessment of amateur boxing performance and is available for use by researchers, coaches and athletes to classify and quantify the movement characteristics of amateur boxing.

  5. Pickering emulsion templated interfacial atom transfer radical polymerization for microencapsulation.

    Science.gov (United States)

    Li, Jian; Hitchcock, Adam P; Stöver, Harald D H

    2010-12-01

    This Article describes a new microencapsulation method based on a Pickering emulsion templated interfacial atom transfer radical polymerization (PETI-ATRP). Cationic LUDOX CL nanoparticles were coated electrostatically with an anionic polymeric ATRP initiator, poly(sodium styrene sulfonate-co-2-(2-bromoisobutyryloxy)ethyl methacrylate) (PSB), prepared by radical copolymerization of sodium styrene sulfonate and 2-(2-bromoisobutyryloxy)ethyl methacrylate (BIEM). The resulting PSB-modified CL particles were surface active and could be used to stabilize oil-in-water Pickering emulsions. ATRP of water-soluble cross-linking monomers, confined to the oil-water interface by the surface-bound PSB, then led to nanoparticle/polymer composite shells. This method allowed encapsulation of core solvents (xylene, hexadecane, perfluoroheptane) with different solubility parameters. The microcapsule (MC) wall chemistry could accommodate different monomers, demonstrating the versatility of this method. Double-walled MCs were formed by sequentially carrying out PETI-ATRP and in situ polymerization of encapsulated monomers. The double-walled structure was verified by both transmission electron microscopy (TEM) and scanning transmission X-ray microscopy (STXM).

  6. Optical fiber tip templating using direct focused ion beam milling.

    Science.gov (United States)

    Micco, A; Ricciardi, A; Pisco, M; La Ferrara, V; Cusano, A

    2015-11-04

    We report on a method for integrating sub-wavelength resonant structures on top of optical fiber tip. Our fabrication technique is based on direct milling of the glass on the fiber facet by means of focused ion beam. The patterned fiber tip acts as a structured template for successive depositions of any responsive or functional overlay. The proposed method is validated by depositing on the patterned fiber a high refractive index material layer, to obtain a 'double-layer' photonic crystal slab supporting guided resonances, appearing as peaks in the reflection spectrum. Morphological and optical characterizations are performed to investigate the effects of the fabrication process. Our results show how undesired effects, intrinsic to the fabrication procedure should be taken into account in order to guarantee a successful development of the device. Moreover, to demonstrate the flexibility of our approach and the possibility to engineering the resonances, a thin layer of gold is also deposited on the fiber tip, giving rise to a hybrid photonic-plasmonic structure with a complementary spectral response and different optical field distribution at the resonant wavelengths. Overall, this work represents a significant step forward the consolidation of Lab-on-Fiber Technology.

  7. Jet Substructure Templates: Data-driven QCD Backgrounds for Fat Jet Searches

    CERN Document Server

    Cohen, Timothy; Lisanti, Mariangela; Lou, Hou Keong; Wacker, Jay G

    2014-01-01

    QCD is often the dominant background to new physics searches for which jet substructure provides a useful handle. Due to the challenges associated with modeling this background, data-driven approaches are necessary. This paper presents a novel method for determining QCD predictions using templates -- probability distribution functions for jet substructure properties as a function of kinematic inputs. Templates can be extracted from a control region and then used to compute background distributions in the signal region. Using Monte Carlo, we illustrate the procedure with two case studies and show that the template approach effectively models the relevant QCD background. This work strongly motivates the application of these techniques to LHC data.

  8. Jet substructure templates: data-driven QCD backgrounds for fat jet searches

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, Timothy [Theory Group, SLAC National Accelerator Laboratory, Menlo Park, CA 94025 (United States); Jankowiak, Martin [Institut für Theoretische Physik, Universität Heidelberg, 69120 Heidelberg (Germany); Lisanti, Mariangela; Lou, Hou Keong [Physics Department, Princeton University, Princeton, NJ 08544 (United States); Wacker, Jay G. [Theory Group, SLAC National Accelerator Laboratory, Menlo Park, CA 94025 (United States)

    2014-05-05

    QCD is often the dominant background to new physics searches for which jet substructure provides a useful handle. Due to the challenges associated with modeling this background, data-driven approaches are necessary. This paper presents a novel method for determining QCD predictions using templates — probability distribution functions for jet substructure properties as a function of kinematic inputs. Templates can be extracted from a control region and then used to compute background distributions in the signal region. Using Monte Carlo, we illustrate the procedure with two case studies and show that the template approach effectively models the relevant QCD background. This work strongly motivates the application of these techniques to LHC data.

  9. Preparation of a Novel Micro/nano Tubes via Electrospun Fiber as a Template

    Institute of Scientific and Technical Information of China (English)

    Taiqi LIU

    2004-01-01

    Poly(para-xylylene) hollow fibers with inner diameters can be prepared via template fibers electrospun from solutions.The PPX is deposited from the vapor phase and the template fiber is selectively removed by heat treatment or solvent extraction. The PPX is partially crystalline and the crystal modification depending on the route is used to extract the template fiber. The thermal stability of the hollow fibers is only slightly reduced relative to the bulk material and the same holds for the UV-stability.

  10. A de novo designed monomeric, compact three helix bundle protein on a carbohydrate template

    DEFF Research Database (Denmark)

    Malik, Leila; Nygård, Jesper; Christensen, Niels Johan

    2015-01-01

    De novo design and chemical synthesis of proteins and of other artificial structures, which mimic them, is a central strategy for understanding protein folding and for accessing proteins with novel functions. We have previously described carbohydrates as templates for the assembly of artificial...... proteins, so called carboproteins. The hypothesis is that the template pre-organizes the secondary structure elements and directs the formation of a tertiary structure, thus achieving structural economy in the combination of peptide, linker, and template. We speculate that the structural information from...

  11. Preparation of Mesoporous Silica Templated Metal Nanowire Films on Foamed Nickel Substrates

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, Roger [University of Alabama, Tuscaloosa; Kenik, Edward A [ORNL; Bakker, Martin [University of Alabama, Tuscaloosa; Havrilla, George [Los Alamos National Laboratory (LANL); Montoya, Velma [Los Alamos National Laboratory (LANL); Shamsuzzoha, Mohammed [University of Alabama, Tuscaloosa

    2006-01-01

    A method has been developed for the formation of high surface area nanowire films on planar and three-dimensional metal electrodes. These nanowire films are formed via electrodeposition into a mesoporous silica film. The mesoporous silica films are formed by a sol-gel process using Pluronic tri-block copolymers to template mesopore formation on both planar and three-dimensional metal electrodes. Surface area increases of up to 120-fold have been observed in electrodes containing a templated film when compared to the same types of electrodes without the templated film.

  12. Nanoscale growth and patterning of inorganic oxides using DNA nanostructure templates.

    Science.gov (United States)

    Surwade, Sumedh P; Zhou, Feng; Wei, Bryan; Sun, Wei; Powell, Anna; O'Donnell, Christina; Yin, Peng; Liu, Haitao

    2013-05-08

    We describe a method to form custom-shaped inorganic oxide nanostructures by using DNA nanostructure templates. We show that a DNA nanostructure can modulate the rate of chemical vapor deposition of SiO2 and TiO2 with nanometer-scale spatial resolution. The resulting oxide nanostructure inherits its shape from the DNA template. This method generates both positive-tone and negative-tone patterns on a wide range of substrates and is compatible with conventional silicon nanofabrication processes. Our result opens the door to the use of DNA nanostructures as general-purpose templates for high-resolution nanofabrication.

  13. Solution-phase synthesis of inorganic nanostructures by chemical transformation from reactive templates

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    The solution-phase synthesis by chemical transformation from reactive templates has proved to be very effective in morphology-controlled synthesis of inorganic nanostructures. This review paper summarizes the recent progress in solution-phase synthesis of one-dimensional and hollow inorganic nanostructures via reactive templates, focusing on the approaches developed in our lab. The formation mechanisms based on reactive templates are discussed in depth to show the general concepts for the preparation processes. An outlook on the future development in this area is also presented.

  14. Using Writing Templates as Materials to Improve Writing Skills in EFL Classes: An Experimental Study

    OpenAIRE

    AKDEMİR, Ahmet Selçuk; EYERCİ, Aysel

    2016-01-01

    In this study it was aimed at revealing the findings of an experimental study in which writing templates were used as writing materials to improve writing skills in intermediate (B1) EFL classes as well as reviewing the concepts writing skills, second language writing and writing templates. The study was conducted with 50 students, aged 20-23, of a public university in Turkey. In Writing and Speaking in English II class writing templates were used as writing materials during 12 weeks. The stu...

  15. The balancing act of template bank construction: inspiral waveform template banks for gravitational-wave detectors and optimizations at fixed computational cost

    CERN Document Server

    Keppel, Drew

    2013-01-01

    Gravitational-wave searches for signals from inspiralling compact binaries have relied on matched filtering banks of waveforms (called template banks) to try to extract the signal waveforms from the detector data. These template banks have been constructed using four main considerations, the region of parameter space of interest, the sensitivity of the detector, the matched filtering bandwidth, and the sensitivity one is willing to lose due to the granularity of template placement, the latter of which is governed by the minimal match. In this work we describe how the choice of the lower frequency cutoff, the lower end of the matched filter frequency band, can be optimized for detection. We also show how the minimal match can be optimally chosen in the case of limited computational resources. These techniques are applied to searches for binary neutron star signals that have been previously performed when analyzing Initial LIGO and Virgo data and will be performed analyzing Advanced LIGO and Advanced Virgo data...

  16. An Empirical Ultraviolet Template for Iron Emission in Quasars as Derived from I Zw 1

    DEFF Research Database (Denmark)

    Vestergaard, Marianne; Wilkes, B. J.

    2001-01-01

    contaminant in optical--UV spectra of AGNs. Its presence complicates and limits the accuracy of measurements of both strong and weak emission lines and the continuum emission, affecting studies of line and continuum interrelations, the ionization structure, and elemental abundances in AGNs. Despite the wealth...... of work on modeling the AGN FeII emission and the need to account for it in observed AGN spectra, there is no UV template electronically available to aid this process. The iron template we present is based on HST spectra of the Narrow Line Seyfert 1, IZw1. Its intrinsic narrow lines (~900 km/s) and rich...... iron spectrum make the template particularly suitable for use with most AGN spectra. The iron emission spectrum and the line identifications and measurements are presented and compared with the work of Laor et al. We illustrate the application of the derived FeII and FeIII templates by fitting...

  17. Sequence fidelity of a template-directed PNA-ligation reaction.

    Science.gov (United States)

    Mattes, A; Seitz, O

    2001-10-21

    The ligation method and an appended duplex-stabilizing dye affect both yield and sequence selectivity of a template-controlled PNA-ligation. The highest selectivity was obtained with a peptide condensation that formed an abasic site.

  18. Topological defects in liquid crystals as templates for molecular self-assembly

    Science.gov (United States)

    Wang, Xiaoguang; Miller, Daniel S.; Bukusoglu, Emre; de Pablo, Juan J.; Abbott, Nicholas L.

    2016-01-01

    Topological defects in liquid crystals (LCs) have been widely used to organize colloidal dispersions and template polymerization, leading to a range of assemblies, elastomers and gels. However, little is understood about molecular-level assembly processes within defects. Here, we report that nanoscopic environments defined by LC topological defects can selectively trigger processes of molecular self-assembly. By using fluorescence microscopy, cryogenic transmission electron microscopy and super-resolution optical microscopy, we observed signatures of molecular self-assembly of amphiphilic molecules in topological defects, including cooperativity, reversibility and controlled growth. We also show that nanoscopic o-rings synthesized from Saturn-ring disclinations and other molecular assemblies templated by defects can be preserved by using photocrosslinkable amphiphiles. Our results reveal that, in analogy to other classes of macromolecular templates such as polymer-surfactant complexes, topological defects in LCs are a versatile class of three-dimensional, dynamic and reconfigurable templates that can direct processes of molecular self-assembly.

  19. Synthesis of templated carbons starting from clay and clay-derived zeolites for hydrogen storage applications

    CSIR Research Space (South Africa)

    Musyoka, Nicholas M

    2014-10-01

    Full Text Available Clay and its recrystallized zeolitic derivatives were used in this study as templating agents for carbon nanostructured materials. The conventional nanocasting process that involves impregnation with furfural alcohol and subsequent chemical vapour...

  20. Synthesis of mesoporous carbon as electrode material for supercapacitor by modified template method

    Institute of Scientific and Technical Information of China (English)

    ZHAO Jia-chang; LAI Chun-yan; DAI Yang; XIE Jing-ying

    2005-01-01

    The pore structures and electrochemical performances of mesoporous carbons prepared by silica sol template method as electrode material for supercapacitor were investigated. The mean pore size and mass specific capacitance of the mesoporous carbons increase with the increase of mass ratio of silica sol to carbon source (glucose). A modified template method, combining silica sol template method and ZnCl2 chemical activation method, was proposed to improve the mass specific capacitance of the mesoporous carbon with an improved BET surface area. The correlation of rate capability and pore structure was studied by constant current discharge and electrochemical impedance spectroscopy. A commercially available microporous carbon was used for comparison. The result shows that mesoporous carbon with a larger pore size displays a higher rate capability. Mesoporous carbon synthesized by modified template method has both high mass specific capacitance and good rate capability.

  1. Nanostructures Based on Porous Aluminum Oxide Templates: Fabrication, Properties and Applications

    Institute of Scientific and Technical Information of China (English)

    LI HuLin

    2001-01-01

    @@ Using the template method to fabricate nanostructures is an entirely new approach for fabricating nanostructures based on self-organization that developed since the middle 1990s, which means that nanostructures can be made directly in the openings of the template under an environment of liquid or vapor. In this case the size and shape of the nano-objects are determined by the size and shape of the openings in the nanotemplates,and may vary over a wide range depending on the template used. This flexibility also extends to the range of materials deposited in the template's openings. This approach is particularly attractive since it circumvents the lithographic limitations altogether by making use of naturally occurring nanotemplates.

  2. Nanostructures Based on Porous Aluminum Oxide Templates: Fabrication, Properties and Applications

    Institute of Scientific and Technical Information of China (English)

    LI; HuLin

    2001-01-01

    Using the template method to fabricate nanostructures is an entirely new approach for fabricating nanostructures based on self-organization that developed since the middle 1990s, which means that nanostructures can be made directly in the openings of the template under an environment of liquid or vapor. In this case the size and shape of the nano-objects are determined by the size and shape of the openings in the nanotemplates,and may vary over a wide range depending on the template used. This flexibility also extends to the range of materials deposited in the template's openings. This approach is particularly attractive since it circumvents the lithographic limitations altogether by making use of naturally occurring nanotemplates.  ……

  3. Development of a high angular resolution diffusion imaging human brain template.

    Science.gov (United States)

    Varentsova, Anna; Zhang, Shengwei; Arfanakis, Konstantinos

    2014-05-01

    Brain diffusion templates contain rich information about the microstructure of the brain, and are used as references in spatial normalization or in the development of brain atlases. The accuracy of diffusion templates constructed based on the diffusion tensor (DT) model is limited in regions with complex neuronal micro-architecture. High angular resolution diffusion imaging (HARDI) overcomes limitations of the DT model and is capable of resolving intravoxel heterogeneity. However, when HARDI is combined with multiple-shot sequences to minimize image artifacts, the scan time becomes inappropriate for human brain imaging. In this work, an artifact-free HARDI template of the human brain was developed from low angular resolution multiple-shot diffusion data. The resulting HARDI template was produced in ICBM-152 space based on Turboprop diffusion data, was shown to resolve complex neuronal micro-architecture in regions with intravoxel heterogeneity, and contained fiber orientation information consistent with known human brain anatomy.

  4. Ultraviolet nanoimprint lithography using cyclodextrin-based porous template for pattern failure reduction

    Science.gov (United States)

    Takei, Satoshi; Hanabata, Makoto

    2015-10-01

    An approach to ultraviolet (UV) nanoimprint lithography using a cyclodextrin-based porous template was investigated for the reduction of air trapping and template damage caused by gases such as nitrogen and oxygen generated from UV cross-linked materials. The accuracy of the printed pattern using UV nanoimprint lithography with the porous transparent template was improved because of enhanced material adsorption and increased permeability to gaseous species. The use of volatile solvents in the UV cross-linked materials for nanoimprint lithography has been limited because of high pattern failure rates. However, using the cyclodextrin-based porous template, the UV cross-linked materials with a 5 wt. % volatile solvent exhibited well-defined nanoscale patterns. Based on this study, acceptable chemistries for the UV cross-linked materials have been expanded, which will be beneficial for future device applications using UV nanoimprint lithography.

  5. Vertically aligned nanowires on flexible silicone using a supported alumina template prepared by pulsed anodization

    DEFF Research Database (Denmark)

    Mátéfi-Tempfli, Stefan; Mátéfi-Tempfli, M.

    2009-01-01

    Carpets of vertically aligned nanowires on flexible substrates are successfully realized by a template method. Applying special pulsed anodization conditions, defect-free nanoporous alumina structures supported on polydimethylsiloxane (PDMS), a flexible silicone elastomer, are created. By using...

  6. Securing Iris Templates using Combined User and Soft Biometric based Password Hardened Fuzzy Vault

    CERN Document Server

    Padmavathi, V S Meenakshi; Dr G

    2010-01-01

    Personal identification and authentication is very crucial in the current scenario. Biometrics plays an important role in this area. Biometric based authentication has proved superior compared to traditional password based authentication. Anyhow biometrics is permanent feature of a person and cannot be reissued when compromised as passwords. To over come this problem, instead of storing the original biometric templates transformed templates can be stored. Whenever the transformation function is changed new revocable/cancelable templates are generated. Soft biometrics is ancillary information that can be combined with primary biometrics to identify a person in a better way. Iris has certain advantage compared to other biometric traits like fingerprint. Iris is an internal part that is less prone to damage. Moreover is very difficult for an attacker to capture an iris. The key advantage of iris biometrics is its stability or template longevity. Biometric systems are vulnerable to a variety of attacks. This work...

  7. Biometric template data protection in mobile device environment using XML-database

    DEFF Research Database (Denmark)

    Thirumathyam, Rubathas; Derawi, Mohammad; Fischer, Paul

    2010-01-01

    This paper proposes a non-traditional XML database which supports biometric templates and provides an API which can be used by independent applications in mobile device environments. Until recently biometric systems are becoming more and more visible in mobile phone devices including fingerprint...... recognition or gait recognition. To gain a real understanding of how it is possible to protect the biometric data, this paper first starts out with introducing a technique for security in a biometric system and emphasizes that template protection is important by going through the vulnerabilities and threats....... Furthermore, it points out requirements for template protection, a recital of various template protection schemes and a brief overview of biometric standards....

  8. Preparation and characterization of keratin and chicken egg white-templated luminescent Au cluster composite film

    Science.gov (United States)

    Xing, Yao; Liu, Hongling; Yu, Weidong

    2016-02-01

    The characterization of keratin-chicken egg white-templated luminescent Au cluster composite films were studied using fourier-transform infrared spectroscopy (FTIR) to demonstrate and quantify the secondary transformation of composite films. The results showed that the secondary structure of treated films was transformed from disordered structure to ordered conformation including α-helix conformation and β-pleated-sheet conformation due to the increase of protein-templated luminescent Au cluster. The absorption features of treated films were exhibited by the UV-vis spectra. The bule-shift and decreased intensity indicated the change of microenvironment due to the concentration of protein-templated luminescent Au cluster. The transmission electron microscopy images of composite films supported the aggregation resulting from microenvironment. The effect of protein-templated luminescent Au cluster was characterized by the laser scanning confocal microscope (LSCM) images which showed the gradually intensive luminescence with increasing Au cluster and the transformation from the whiskers to nanoparticle.

  9. Fabrication of chemical templates via selective laser-induced desorption of hexadecanethiol self-assembled monolayers

    Science.gov (United States)

    Schröter, Anja; Mathieu, Mareike; Franzka, Steffen; Feydt, Jürgen; Irsen, Stephan; Hartmann, Nils

    2013-08-01

    A nonlinear photothermal laser patterning technique for rapid fabrication of chemical templates is demonstrated. Hexadecanethiol monolayers on Au-coated Si substrates are processed at λ = 532 nm, a 1/e2 spot diameter of d=2.8 μm and ambient conditions. Local laser irradiation at high laser powers and short irradiation times in the micro-/millisecond range induces desorption of thiol molecules. The laser-depleted areas are backfilled with mercaptohexadecanoic acid in order to build up chemical templates. Atomic force microscopy, scanning electron microscopy and scanning Auger electron spectroscopy are used for characterization of these templates. In agreement with a selective laser process, the results indicate the formation of flat chemical patterns with well-defined boundaries. Complementary condensation experiments demonstrate the functionality of the patterns as hydrophilic/hydrophobic templates. In particular, upon decreasing the temperature below the dew point, selective formation of water droplets on the backfilled areas is observed.

  10. Microwave Absorption Behavior of Mesoporous Transition Metal Oxide Templated from SBA-15 and KIT-6

    Science.gov (United States)

    Wu, Hongjing; Wang, Liuding; Wang, Yiming

    2014-12-01

    In this paper, we have synthesized meso-oxides (i.e., Co3O4 and NiO) by using mesoporous silica as hard template. The microstructures and chemical compositions of the corresponding meso-oxides were characterized by the Transmission electron microscope-selected area electron diffusion (TEM-SAED), X-ray diffraction (XRD), scanning electron microscope-energy dispersive X-ray spectroscopy (SEM-EDS), respectively. And, their electromagnetic and microwave absorption properties were investigated in the frequency range of 2-18 GHz. The results indicate that meso-oxide templated from KIT-6 (i.e., meso-K-Co/Ni) exhibit a dual absorption characteristic compared with those using SBA-15 as hard template. This phenomenon suggests that meso-oxides templated from SBA-15 and KIT-6 can exhibit different microwave absorption behaviors due to their respective microstructures.

  11. Synthesis of silver nanotubes by electroless deposition in porous anodic aluminium oxide templates.

    Science.gov (United States)

    Zhang, Shu-Hong; Xie, Zhao-Xiong; Jiang, Zhi-Yuan; Xu, Xin; Xiang, Juan; Huang, Rong-Bin; Zheng, Lan-Sun

    2004-05-07

    An electroless deposition method has been employed for the synthesis of silver nanotubes using porous anodic aluminium oxide as templates, by which high-yield silver nanotubes with length over ten microns have been synthesized.

  12. Recognizing Questions and Answers in EMR Templates Using Natural Language Processing.

    Science.gov (United States)

    Divita, Guy; Shen, Shuying; Carter, Marjorie E; Redd, Andrew; Forbush, Tyler; Palmer, Miland; Samore, Matthew H; Gundlapalli, Adi V

    2014-01-01

    Templated boilerplate structures pose challenges to natural language processing (NLP) tools used for information extraction (IE). Routine error analyses while performing an IE task using Veterans Affairs (VA) medical records identified templates as an important cause of false positives. The baseline NLP pipeline (V3NLP) was adapted to recognize negation, questions and answers (QA) in various template types by adding a negation and slot:value identification annotator. The system was trained using a corpus of 975 documents developed as a reference standard for extracting psychosocial concepts. Iterative processing using the baseline tool and baseline+negation+QA revealed loss of numbers of concepts with a modest increase in true positives in several concept categories. Similar improvement was noted when the adapted V3NLP was used to process a random sample of 318,000 notes. We demonstrate the feasibility of adapting an NLP pipeline to recognize templates.

  13. Public Notification Instructions and Templates for the Revised Total Coliform Rule (RTCR)

    Science.gov (United States)

    EPA has developed public notification (PN) templates to help with implementation of the PN Rule. This document aims to assist water systems with the Public Notification requirements specific to the Revised Total Coliform Rule (RTCR).

  14. Fast patterning and dry-etch of SiNχ for high resolution nanoimprint templates

    Institute of Scientific and Technical Information of China (English)

    Shu Zhen; Wan Jing; Lu Bingrui; Xie Shenqi; Chen Yifang; Qu Xinping; Liu Ran

    2009-01-01

    We developed a simplified nanofabrication process for imprint templates by fast speed electron beam lithography (EBL) and a dry etch technique on a SiNx substrate, intended for large area manufacturing. To this end,the highly sensitive chemically amplified resist (CAR), NEB-22, with negative tone was used. The EBL process first defines the template pattern in NEB-22, which is then directly used as an etching mask in the subsequent reactive ion etching (RIE) on the SiNx to form the desired templates. The properties of both e-beam lithography and dry etch of NEB-22 were carefully studied, indicating significant advantages of this process with some drawbacks compared to when Cr was used as an etching mask. Nevertheless, our results open up a good opportunity to fabricate high resolution imprint templates with the prospect of wafer scale manufacturing.

  15. A novel memristive cellular neural network with time-variant templates

    Directory of Open Access Journals (Sweden)

    Xiaofang Hu

    2016-03-01

    Full Text Available A cellular neural network (CNN is a massively parallel analog array processor capable of solving various complex processing problems by using specific templates that characterize the synaptic connections. The hardware implementation and applications of CNN have attracted a great deal of attention. Recently, memristors with nanometer-scale and variable gradual conductance have been exploited to make compact and programmable electric synapses. This paper proposes and studies a novel memristive CNN (Mt-CNN with time-variant templates realized by memristor crossbar synaptic circuits. The template parameters are estimated analytically. The Mt-CNN provides a promising solution to hardware realization of real-time template updating processes, which can be used to effectively deal with various complicated problems of cascaded processing. Its effectiveness and advantages are demonstrated by practical examples of edge detection on noisy images.

  16. Templating Routes to Supported Oxide Catalysts by Design

    Energy Technology Data Exchange (ETDEWEB)

    Notestein, Justin M. [Northwestern Univ., Evanston, IL (United States)

    2016-09-08

    The rational design and understanding of supported oxide catalysts requires at least three advancements, in order of increasing complexity: the ability to quantify the number and nature of active sites in a catalytic material, the ability to place external controls on the number and structure of these active sites, and the ability to assemble these active sites so as to carry out more complex functions in tandem. As part of an individual investigator research program that is integrated with the Northwestern University Institute for Catalysis in Energy Processes (ICEP) as of 2015, significant advances were achieved in these three areas. First, phosphonic acids were utilized in the quantitative assessment of the number of active and geometrically-available sites in MOx-SiO2 catalysts, including nanocrystalline composites, co-condensed materials, and grafted structures, for M=Ti, Zr, Hf, Nb, and Ta. That work built off progress in understanding supported Fe, Cu, and Co oxide catalysts from chelating and/or multinuclear precursors to maximize surface reactivity. Secondly, significant progress was made in the new area of using thin oxide overcoats containing ‘nanocavities’ from organic templates as a method to control the dispersion and thermal stability of subsequently deposited metal nanoparticles or other catalytic domains. Similar methods were used to control surface reactivity in SiO2-Al2O3 acid catalysts and to control reactant selectivity in Al2O3-TiO2 photocatalysts. Finally, knowledge gained from the first two areas has been combined to synthesize a tandem catalyst for hydrotreating reactions and an orthogonal tandem catalyst system where two subsequent reactions in a reaction network are independently controlled by light and heat. Overall, work carried out under this project significantly advanced the knowledge of synthesis-structure-function relationships in supported

  17. Template affinity role in CH shrink by DSA planarization

    Science.gov (United States)

    Tiron, R.; Gharbi, A.; Pimenta Barros, P.; Bouanani, S.; Lapeyre, C.; Bos, S.; Fouquet, A.; Hazart, J.; Chevalier, X.; Argoud, M.; Chamiot-Maitral, G.; Barnola, S.; Monget, C.; Farys, V.; Berard-Bergery, S.; Perraud, L.; Navarro, C.; Nicolet, C.; Hadziioannou, G.; Fleury, G.

    2015-03-01

    Density multiplication and contact shrinkage of patterned templates by directed self-assembly (DSA) of block copolymers (BCP) stands out as a promising alternative to overcome the limitations of conventional lithography. The main goal of this paper is to investigate the potential of DSA to address contact and via levels patterning with high resolution by performing either CD shrink or contact multiplication. Different DSA processes are benchmarked based on several success criteria such as: CD control, defectivity (missing holes) as well as placement control. More specifically, the methodology employed to measure DSA contact overlay and the impact of process parameters on placement error control is detailed. Using the 300mm pilot line available in LETI and Arkema's materials, our approach is based on the graphoepitaxy of PS-b-PMMA block copolymers. Our integration scheme, depicted in figure 1, is based on BCP self-assembly inside organic hard mask guiding patterns obtained using 193i nm lithography. The process is monitored at different steps: the generation of guiding patterns, the directed self-assembly of block copolymers and PMMA removal, and finally the transfer of PS patterns into the metallic under layer by plasma etching. Furthermore, several process flows are investigated, either by tuning different material related parameters such as the block copolymer intrinsic period or the interaction with the guiding pattern surface (sidewall and bottom-side affinity). The final lithographic performances are finely optimized as a function of the self-assembly process parameters such as the film thickness and bake (temperature and time). Finally, DSA performances as a function of guiding patterns density are investigated. Thus, for the best integration approach, defect-free isolated and dense patterns for both contact shrink and multiplication (doubling and more) have been achieved on the same processed wafer. These results show that contact hole shrink and

  18. Learning a hierarchical deformable template for rapid deformable object parsing.

    Science.gov (United States)

    Zhu, Long Leo; Chen, Yuanhao; Yuille, Alan

    2010-06-01

    In this paper, we address the tasks of detecting, segmenting, parsing, and matching deformable objects. We use a novel probabilistic object model that we call a hierarchical deformable template (HDT). The HDT represents the object by state variables defined over a hierarchy (with typically five levels). The hierarchy is built recursively by composing elementary structures to form more complex structures. A probability distribution--a parameterized exponential model--is defined over the hierarchy to quantify the variability in shape and appearance of the object at multiple scales. To perform inference--to estimate the most probable states of the hierarchy for an input image--we use a bottom-up algorithm called compositional inference. This algorithm is an approximate version of dynamic programming where approximations are made (e.g., pruning) to ensure that the algorithm is fast while maintaining high performance. We adapt the structure-perceptron algorithm to estimate the parameters of the HDT in a discriminative manner (simultaneously estimating the appearance and shape parameters). More precisely, we specify an exponential distribution for the HDT using a dictionary of potentials, which capture the appearance and shape cues. This dictionary can be large and so does not require handcrafting the potentials. Instead, structure-perceptron assigns weights to the potentials so that less important potentials receive small weights (this is like a "soft" form of feature selection). Finally, we provide experimental evaluation of HDTs on different visual tasks, including detection, segmentation, matching (alignment), and parsing. We show that HDTs achieve state-of-the-art performance for these different tasks when evaluated on data sets with groundtruth (and when compared to alternative algorithms, which are typically specialized to each task).

  19. Electrodeposition of gold templated by patterned thiol monolayers

    Energy Technology Data Exchange (ETDEWEB)

    She, Zhe [EaStCHEM School of Chemistry, University of St. Andrews, KY16 9ST (United Kingdom); Di Falco, Andrea [SUPA, School of Physics and Astronomy, University of St. Andrews, KY16 9SS (United Kingdom); Hähner, Georg [EaStCHEM School of Chemistry, University of St. Andrews, KY16 9ST (United Kingdom); Buck, Manfred, E-mail: mb45@st-andrews.ac.uk [EaStCHEM School of Chemistry, University of St. Andrews, KY16 9ST (United Kingdom)

    2016-06-15

    Graphical abstract: - Highlights: • First demonstration of electrodeposition/lift-off of gold using thiol monolayers. • Microelectrode structures with large length to width ratio were generated. • Performance of two different patterning techniques was investigated. • Conditions for achieving good contrast in the electrodeposition were established. - Abstract: The electrochemical deposition of Au onto Au substrates modified by self-assembled monolayers (SAMs) was studied by linear sweep voltammetry (LSV), atomic force microscopy (AFM) and scanning electron microscopy (SEM). Patterned SAMs exhibiting electrochemical contrast were prepared by two different methods. One used microcontact printing (μCP) to generate a binary SAM of ω-(4′-methyl-biphenyl-4-yl)-propane thiol (CH{sub 3}-C{sub 6}H{sub 4}-C{sub 6}H{sub 4}-(CH{sub 2}){sub 3}-SH, MBP3) and octadecane thiol (CH{sub 3}(CH{sub 2}){sub 17}SH, ODT). Templated by the SAM, a gold microelectrode structure was electrodeposited featuring a line 15 μm wide and 3 mm long. After transfer to an epoxy substrate the structure proved to be electrically conductive across the full length. The other patterning method applied electron beam lithography (EBL) where electrochemical contrast was achieved by crosslinking molecules in a single component SAM of MBP3. An electron dose above 250 mC/cm{sup 2} results in a high deposition contrast. The choice of parameters for the deposition/lift-off process is found to be more critical for Au compared to Cu studied previously. The origin of the differences and implications for nanoscale patterning are discussed.

  20. Prediction of enzyme function based on 3D templates of evolutionarily important amino acids

    Directory of Open Access Journals (Sweden)

    Chen Brian Y

    2008-01-01

    Full Text Available Abstract Background Structural genomics projects such as the Protein Structure Initiative (PSI yield many new structures, but often these have no known molecular functions. One approach to recover this information is to use 3D templates – structure-function motifs that consist of a few functionally critical amino acids and may suggest functional similarity when geometrically matched to other structures. Since experimentally determined functional sites are not common enough to define 3D templates on a large scale, this work tests a computational strategy to select relevant residues for 3D templates. Results Based on evolutionary information and heuristics, an Evolutionary Trace Annotation (ETA pipeline built templates for 98 enzymes, half taken from the PSI, and sought matches in a non-redundant structure database. On average each template matched 2.7 distinct proteins, of which 2.0 share the first three Enzyme Commission digits as the template's enzyme of origin. In many cases (61% a single most likely function could be predicted as the annotation with the most matches, and in these cases such a plurality vote identified the correct function with 87% accuracy. ETA was also found to be complementary to sequence homology-based annotations. When matches are required to both geometrically match the 3D template and to be sequence homologs found by BLAST or PSI-BLAST, the annotation accuracy is greater than either method alone, especially in the region of lower sequence identity where homology-based annotations are least reliable. Conclusion These data suggest that knowledge of evolutionarily important residues improves functional annotation among distant enzyme homologs. Since, unlike other 3D template approaches, the ETA method bypasses the need for experimental knowledge of the catalytic mechanism, it should prove a useful, large scale, and general adjunct to combine with other methods to decipher protein function in the structural proteome.