Dicty_cDB: VFH144 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available VF (Link to library) VFH144 (Link to dictyBase) - - - - VFH144P (Link to Original s...ite) VFH144F 641 VFH144Z 312 VFH144P 953 - - Show VFH144 Library VF (Link to library) Clone ID VFH144 (Link to dict...yBase) Atlas ID - NBRP ID - dictyBase ID - Link to Contig - Original site URL http://dictycdb.biol.ts...nces producing significant alignments: (bits) Value N U36937 |U36937.1 Dictyostel...RNA sequence. 42 8e-04 2 AY342298 |AY342298.1 Ictalurus punctatus ER-resident chaperone calreticulin mRNA, c

Lifetime measurement in 144Gd

International Nuclear Information System (INIS)

Jensen, H.J.; Gast, W.; Georgiev, A.; Jaeger, H.M.; Lieder, R.M.; Utzelmann, S.; Gierlik, M.; Morek, T.; Przestrzelska, K.; Rzaca-Urban, T.; Dewald, A.; Kuehn, R.; Meier, C.; Ender, C.; Haertlein, T.

1996-01-01

The lifetime measurements of excited states in 144 Gd were carried out using the Koeln RDM-plunger together with the 2 x 3 CLUSTER detector setup in Heidelberg. The nucleus was populated in the 100 Mo( 48 Ti,4n) 144 Gd reaction at a beam energy of 205 MeV giving a recoil velocity of v/c = 2.6 %. Three and higher fold γ-ray coincidences were measured at 12 target-stopper distances ranged from 0 to 400 μm. Both the dipole and quadrupole bands in 144 Gd have been observed. The analysis is in progress

46 CFR 201.144 - Offer of proof.

Science.gov (United States)

2010-10-01

... 46 Shipping 8 2010-10-01 2010-10-01 false Offer of proof. 201.144 Section 201.144 Shipping... PROCEDURE Evidence (Rule 14) § 201.144 Offer of proof. An offer of proof made in connection with an... accompany the record as the offer of proof. ...

Chemical Analysis of Cellular and Extracellular Carbohydrates of a Biofilm-Forming Strain Pseudomonas aeruginosa PA14

Science.gov (United States)

Coulon, Charlène; Vinogradov, Evgeny; Filloux, Alain; Sadovskaya, Irina

2010-01-01

Background Pseudomonas aeruginosa is a Gram-negative bacterium and an opportunistic pathogen, which causes persisting life-threatening infections in cystic fibrosis (CF) patients. Biofilm mode of growth facilitates its survival in a variety of environments. Most P. aeruginosa isolates, including the non-mucoid laboratory strain PA14, are able to form a thick pellicle, which results in a surface-associated biofilm at the air-liquid (A–L) interface in standing liquid cultures. Exopolysaccharides (EPS) are considered as key components in the formation of this biofilm pellicle. In the non-mucoid P. aeruginosa strain PA14, the “scaffolding” polysaccharides of the biofilm matrix, and the molecules responsible for the structural integrity of rigid A–L biofilm have not been identified. Moreover, the role of LPS in this process is unclear, and the chemical structure of the LPS O-antigen of PA14 has not yet been elucidated. Principal Findings In the present work we carried out a systematic analysis of cellular and extracellular (EC) carbohydrates of P. aeruginosa PA14. We also elucidated the chemical structure of the LPS O-antigen by chemical methods and 2-D NMR spectroscopy. Our results showed that it is composed of linear trisaccharide repeating units, identical to those described for P. aeruginosa Lanýi type O:2a,c (Lanýi-Bergman O-serogroup 10a, 10c; IATS serotype 19) and having the following structure: -4)-α-L-GalNAcA-(1–3)-α-D-QuiNAc-(1–3)- α-L-Rha-(1-. Furthermore, an EC O-antigen polysaccharide (EC O-PS) and the glycerol-phosphorylated cyclic β-(1,3)-glucans were identified in the culture supernatant of PA14, grown statically in minimal medium. Finally, the extracellular matrix of the thick biofilm formed at the A-L interface contained, in addition to eDNA, important quantities (at least ∼20% of dry weight) of LPS-like material. Conclusions We characterized the chemical structure of the LPS O-antigen and showed that the O-antigen polysaccharide is

19 CFR 144.36 - Withdrawal for transportation.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Withdrawal for transportation. 144.36 Section 144... § 144.36 Withdrawal for transportation. (a) Time limit. Merchandise may be withdrawn from warehouse for transportation to another port of entry if withdrawal for consumption or exportation can be accomplished at the...

43 CFR 14.4 - Publication of petitions.

Science.gov (United States)

2010-10-01

... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Publication of petitions. 14.4 Section 14.4 Public Lands: Interior Office of the Secretary of the Interior PETITIONS FOR RULEMAKING § 14.4 Publication of petitions. A petition for rulemaking may be published in the Federal Register if the official...

Dicty_cDB: VFJ144 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available VF (Link to library) VFJ144 (Link to dictyBase) - - - Contig-U12576-1 - (Link to Or...iginal site) - - VFJ144Z 698 - - - - Show VFJ144 Library VF (Link to library) Clone ID VFJ144 (Link to dicty...Base) Atlas ID - NBRP ID - dictyBase ID - Link to Contig Contig-U12576-1 Original site URL http://dictycdb.b...IGIDDELGPQLFKVDPAGVFTGYKATAAGEKEQESTNFLEKK FKSNPQLSKDETIQMAISTLQSVLGADLKPSDLEIGICTMDNRKFVIMTDED Translated A...PQLFKVDPAGVFTGYKATAAGEKEQESTNFLEKK FKSNPQLSKDETIQMAISTLQSVLGADLKPSDLEIGICTMDNRKFVIMTDED Frame B: ---givrkyl*

MicroRNA-144 inhibits hepatocellular carcinoma cell proliferation

Indian Academy of Sciences (India)

MiR-144 was shown to besignificantly down-regulated in HCC tissues and cell lines. Subsequently, overexpression of miR-144 was transfectedinto HCC cell lines so as to investigate its biological function, including MTT, colony formation, and transwell assays.Gain of function assay revealed miR-144 remarkably inhibited ...

42 CFR 456.144 - Data sources for studies.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Data sources for studies. 456.144 Section 456.144 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES... Care Evaluation Studies § 456.144 Data sources for studies. Data that the committee uses to perform...

The action of NIR (808nm) laser radiation and gold nanorods labeled with IgA and IgG human antibodies on methicillin-resistant and methicillin sensitive strains of Staphylococcus aureus

Science.gov (United States)

Tuchina, Elena S.; Petrov, Pavel O.; Ratto, Fulvio; Centi, Sonia; Pini, Roberto; Tuchin, Valery V.

2015-03-01

The effect of NIR laser radiation (808 nm) on methicillin-sensitive and methicillin resistant strains of Staphylococcus aureus incubated with gold nanorods is studied. Nanorods having length of 44 (± 4) nm and diameter of 10 (± 3) nm with the absorption maximum in the NIR (800 nm), functionalized with human immunoglobulins IgA and IgG, were synthesized and used in the studies. The killing ability up to 97% of the microorganism populations by using this nanotechnology was shown.

27 CFR 28.144 - Export marks.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Export marks. 28.144... § 28.144 Export marks. (a) General Requirement. In addition to the marks and brands required to be... brewer shall mark the word “Export” on each container or case of beer, or the words “Beer concentrate for...

Toxicity of inhaled 144CeCl3 in beagle dogs

International Nuclear Information System (INIS)

Muggenburg, B.A.; Hahn, F.F.; Boecker, B.B.; McClellan, R.O.; Pickrell, J.A.

1980-01-01

The metabolism, dosimetry and effects of inhaled 144 CeCl 3 in beagle dogs are being studied to assess the biological consequences of inhaling 144 Ce. Studies have shown that the 144 Ce deposited in the lung as 144 CeCl 3 is translocated at a moderately rapid rate to liver and skeleton and that significant radiation doses are accumulated by all three organs. Fifty-five dogs that inhaled 144 CeCl 3 and 17 control dogs are being observed for their life span. The 144 Ce-exposed dogs had long-term retained burdens that ranged from 2.6 to 360 μCi 144 Ce/kg body weight. Fifty-three of the dogs exposed to 144 CeCl 3 have died and twelve control dogs have died. Serial observations are continuing on the two surviving exposed dogs and five control dogs

Metabolism of cerium 144 in rat. Distribution - elimination - dosimetry; Metabolisme du cerium 144 chez le rat. Distribution - elimination - dosimetrie

Energy Technology Data Exchange (ETDEWEB)

Remy, Jacques

1959-07-01

This academic report concerns a study during which cerium 144 has been intravenously injected to three-month old rats under the form of cerium chloride in aqueous solution with pH of 9,5. Rats have then been sacrificed at different times after the injection, and organ or tissue samplings have been performed to study the isotope distribution in their bodies. This allowed the calculation of internal irradiation doses locally received by the animal, and also to identify critical organs with respect to cerium 144. Thus, until the twentieth day after injection, liver is the critical organ. After, it is the skeleton, for the rest of the animal's life. The bone internal irradiation is the highest danger for an internal cerium 144 contamination, due to threats on body hematopoietic functions [French] Le Cerium 144 est injecte a des rats de trois mois par voie intraveineuse, sous forme de chlorure en solution aqueuse a pH = 9,5. Une telle solution est colloidale. Les rats sont sacrifies par groupe de 5 a des temps differents apres l'injection et des prelevements d'organes ou de tissus sont effectues qui permettent d'etudier la distribution de l'isotope dans l'organisme. Cette etude de la distribution du Cerium 144 dans l'organiqme du rat a permis egalement le calcul des doses d'irradiation interne recues localement par l'animal. Ces donnees permettent de definir les organes critiques de l'organisme pour le Cerium 144: Jusqu'au 20eme jour l'organe critique est le foie. Ce sera ensuite le squelette, et ce, pendant toute la vie de l'animal. L'irradiation interne de l'os constitue, en raison des menaces qu'elle comporte pour les fonctions hematopoietiques de l'organisme, le plus grand danger d'une contamination interne par le Cerium 144.

Comment on ``(Au-Ag)144(SR)60 alloy nanomolecules'' by C. Kumara and A. Dass, Nanoscale, 2011, 3, 3064

Science.gov (United States)

Barcaro, Giovanni; Sementa, Luca; Fortunelli, Alessandro; Stener, Mauro

2015-04-01

A recent paper in this journal reported the synthesis and characterization via electrospray ionization mass spectroscopy and UV-vis spectroscopy of (Au-Ag)144(SR)60 alloy nanomolecules with different compositions, ranging from 1 : 0 to 1 : 0.75 Au : Ag ratios. The UV-vis spectra of such systems were found to exhibit absorption peaks at 310 nm, 425 nm and 560 nm, interpreted as reminiscent of the silver surface plasmon resonance band due to simple atomic replacement of Au by Ag atoms in a fixed structural framework. On the basis of a comparison of experimentally observed and theoretically simulated optical absorption spectra, we conclude that the experimental situation must be more complicated, and that further work is needed to achieve atomistic insight into these fascinating systems.

19 CFR 144.33 - Minimum quantities to be withdrawn.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Minimum quantities to be withdrawn. 144.33 Section 144.33 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT... Warehouse § 144.33 Minimum quantities to be withdrawn. Unless by special authority of the Commissioner of...

10 CFR 72.144 - Quality assurance program.

Science.gov (United States)

2010-01-01

... quality history and degree of standardization of the item. (d) The licensee, applicant for a license... 10 Energy 2 2010-01-01 2010-01-01 false Quality assurance program. 72.144 Section 72.144 Energy... NUCLEAR FUEL, HIGH-LEVEL RADIOACTIVE WASTE, AND REACTOR-RELATED GREATER THAN CLASS C WASTE Quality...

Method for removing trace contaminants from multicurie amounts of 144Ce

International Nuclear Information System (INIS)

Wagner, J.A.; Kanapilly, G.M.

1976-01-01

Removal of contaminants from stock solutions of 144 Ce(III) was required for large quantities of 144 Ce prior to incorporation into fused aluminosilicate particles for inhalation toxicology studies. Since available procedures for purification of 144 Ce could not be readily adapted to our laboratory conditions and requirements, a simple procedure was developed to purify 144 Ce in multicurie quantities of 144 Ce(III). This procedure consists of separation of 144 Ce from contaminants by precipitation and filtrations at different pH. Its simplicity and efficacy in providing a stock solution that would readily exchange into montmorillonite clay was demonstrated when it was used during the preparation of large amounts of 144 Ce in fused aluminosilicate particles

19 CFR 144.38 - Withdrawal for consumption.

Science.gov (United States)

2010-04-01

... 19 Customs Duties 2 2010-04-01 2010-04-01 false Withdrawal for consumption. 144.38 Section 144.38... Withdrawal for consumption. (a) Form. Withdrawals for consumption of merchandise in bonded warehouses shall... considered a withdrawal for consumption pursuant to § 181.53 of this chapter. (c) Information to be shown on...

Pseudomonas aeruginosa chromosomal beta-lactamase in patients with cystic fibrosis and chronic lung infection. Mechanism of antibiotic resistance and target of the humoral immune response

DEFF Research Database (Denmark)

Ciofu, Oana

2003-01-01

the development of resistance to beta-lactam antibiotics and the occurrence of high beta-lactamase producing strains and between the MIC of the beta-lactams and the levels of beta-lactamase expression. Partially derepressed mutants, characterized by high basal levels of beta-lactamase with the possibility...... of induction to even higher levels during treatment with beta-lactam antibiotics, were the most frequent phenotype found among resistant Danish P. aeruginosa CF isolates. We have also shown that the high alginate producing P. aeruginosa isolates, that characterize the chronic lung infection in CF patients......, are more susceptible to antibiotics and produce less beta-lactamase than the non-mucoid paired isolates. We propose that the non-mucoid isolates are exposed to a relatively higher antibiotic pressure than the mucoid isolates and therefore, they become easily antibiotic resistant and in consequence produce...

Sb surfactant effect on GaInAs/GaAs highly strained quantum well lasers emitting at 1200 nm range grown by molecular beam epitaxy

International Nuclear Information System (INIS)

Kageyama, Takeo; Miyamoto, Tomoyuki; Ohta, Masataka; Matsuura, Tetsuya; Matsui, Yasutaka; Furuhata, Tatsuya; Koyama, Fumio

2004-01-01

A surfactant effect of antimony (Sb) on highly strained GaInAs quantum wells (QWs) was studied by molecular beam epitaxy. Noticeable improvement of the photoluminescence (PL) was observed by adding the dilute Sb. The QWs showed an increased PL intensity and narrow linewidth of 23 meV for the wavelength range up to 1180 nm. An atomic force microscope study showed a flattened surface morphology by the introduction of the Sb. Broad-area lasers with a GaInAsSb/GaAs double-QW active layer emitting at 1170 nm showed a low threshold current density of 125 A/cm 2 per well for an infinite cavity length

144__Olukosi_drinking wate

African Journals Online (AJOL)

User

Bayero Journal of Pure and Applied Sciences, 9(2): 141 - 144 ... 1- Department of Food science, Kano University of Science and Technology, Wudil, Nigeria ... A total of fifty samples from different water sources were analysed for the following ...

Assessment of a cerium---praseodymium-144 inhalation case

International Nuclear Information System (INIS)

Glenn, R.D.; Heid, K.R.; Houston, J.R.

1976-01-01

A case involving an acute exposure to a 144 Ce- 144 Pr contaminated atmosphere is presented with a discussion of the treatment and evaluation of data collected out to 800 days post intake. Treatment included irrigation of the upper nasal passages with normal saline, nebulization with normal saline mist and DTPA therapy. Assessment of the deposition and the resulting dose commitment was based on in vivo measurements and excretion data. The initial pulmonary burden, which cleared with three distinct half times, was estimated at 2.1 μCi of 144 Ce

40 CFR 144.41 - Minor modifications of permits.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Minor modifications of permits. 144.41 Section 144.41 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS... responsibility, coverage, and liability between the current and new permittees has been submitted to the Director...

7 CFR 58.144 - Pasteurization or ultra-pasteurization.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Pasteurization or ultra-pasteurization. 58.144 Section... Service 1 Operations and Operating Procedures § 58.144 Pasteurization or ultra-pasteurization. When pasteurization or ultra-pasteurization is intended or required, or when a product is designated “pasteurized” or...

41 CFR 105-71.144 - Termination for convenience.

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Termination for convenience. 105-71.144 Section 105-71.144 Public Contracts and Property Management Federal Property... Termination for convenience. Except as provided in § 105-71.143 awards may be terminated in whole or in part...

40 CFR 144.4 - Considerations under Federal law.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Considerations under Federal law. 144... (CONTINUED) UNDERGROUND INJECTION CONTROL PROGRAM General Provisions § 144.4 Considerations under Federal law. The following is a list of Federal laws that may apply to the issuance of permits under these rules...

19 CFR 144.42 - Combined entry for rewarehouse and withdrawal for consumption.

Science.gov (United States)

2010-04-01

... consumption. 144.42 Section 144.42 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND... Rewarehouse Entries § 144.42 Combined entry for rewarehouse and withdrawal for consumption. (a) Applicability... rewarehouse and withdrawal for consumption. (b) Procedure for entry. The procedures set forth in § 144.41 are...

Electron multi-beam technology for mask and wafer writing at 0.1nm address grid

Science.gov (United States)

Platzgummer, Elmar; Klein, Christof; Loeschner, Hans

2013-03-01

An overview of electron beam tool configurations is provided. The adoption of multi-beam writing is mandatory in order to fulfill industrial needs for 11nm HP nodes and below. IMS Nanofabrication realized a 50keV electron multibeam proof-of-concept (POC) tool confirming writing principles with 0.1nm address grid and lithography performance capability. The new architecture will be introduced for mask writing at first, but has also the potential for 1xmask (master template) and direct wafer writing. The POC system achieves the predicted 5nm 1sigma blur across the 82μm x 82μm array of 512 x 512 (262,144) programmable 20nm beams. 24nm HP has been demonstrated and complex patterns have been written in scanning stripe exposure mode. The first production worthy system for the 11nm HP mask node is scheduled for 2014 (Alpha), 2015 (Beta) and 1st generation HVM mask writer tools in 2016. Implementing a multi-axis column configuration, 50x / 100x productivity enhancements are possible for direct 300mm / 450mm wafer writing.

33 CFR 144.01-30 - First-aid kit.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false First-aid kit. 144.01-30 Section...) OUTER CONTINENTAL SHELF ACTIVITIES LIFESAVING APPLIANCES Manned Platforms § 144.01-30 First-aid kit. On each manned platform a first-aid kit approved by the Commandant or the U.S. Bureau of Mines shall be...

Alginate overproduction affects Pseudomonas aeruginosa biofilm structure and function

DEFF Research Database (Denmark)

Hentzer, Morten; Teitzel, G.M.; Balzer, G.J.

2001-01-01

-resistant communities of microorganisms organized in biofilms. Although biofilm formation and the conversion to mucoidy are both important aspects of CF pathogenesis, the relationship between them is at the present unclear. In this study, we report that the overproduction of alginate affects biofilm development...... on an abiotic surface. Biofilms formed by an alginate- overproducing strain exhibit a highly structured architecture and are significantly more resistant to the antibiotic tobramycin than a biofilm formed by an isogenic nonmucoid strain. These results suggest that an important consequence of the conversion...

Isolation and genomic characterization of Escherichia coli O157:NM ...

African Journals Online (AJOL)

Human diseases caused by Escherichia coli O157:NM and E. coli O157:H7 strains have been reported throughout the world. In developed countries, serotype O157:H7 represents the major cause of human diseases; however, there have been increasing reports of non-O157 Shiga toxin (Stx)-producing E. coli strains ...

Lethality in repair-proficient Escherichia coli after 365nm ultraviolet light irradiation is dependent on fluence rate

International Nuclear Information System (INIS)

Peak, J.G.; Peak, M.J.

1982-01-01

Reciprocity (total applied fluence produces the same response, regardless of the fluence rate) for the lethal effects caused by 365 and 254 nm ultraviolet light (UV) was studied for repair-proficient and -deficient Escherichia coli strains. In the repair-proficient strain, E. coli WP2 uvr A + recA + , reciprocity after 365 nm UV was only observed at fluence rates of about 750 Wm -2 and above. Below this rate, the cells became increasingly sensitive as the fluence rate was decreased. Similar lack of reciprocity was obtained whether the cells were exposed at 0 or 25 0 C. The double repair-defective mutant, E. coli WP100 uvr A recA, showed complete reciprocity after 365 nm UV over the same range of fluence rates measured for the repair-proficient strain. For 254 nm UV, complete reciprocity occurred in both strains over a range of fluence rates differing by an order of magnitude. (author)

40 CFR 52.144 - Significant deterioration of air quality.

Science.gov (United States)

2010-07-01

... quality. 52.144 Section 52.144 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... deterioration of air quality. (a) The requirements of sections 160 through 165 of the Clean Act are not met... lands does not include approvable procedures for preventing the significant deterioration of air quality...

17 CFR 14.4 - Violation of Commodity Exchange Act.

Science.gov (United States)

2010-04-01

... 17 Commodity and Securities Exchanges 1 2010-04-01 2010-04-01 false Violation of Commodity Exchange Act. 14.4 Section 14.4 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION... Exchange Act. The Commission may deny, temporarily or permanently, the privilege of appearing or practicing...

On the gain properties of “thin” elastically strained InGaAs/InGaAlAs quantum wells emitting in the near-infrared spectral region near 1550 nm

Energy Technology Data Exchange (ETDEWEB)

Novikov, I. I.; Karachinsky, L. Ya. [Connector Optics LLC (Russian Federation); Kolodeznyi, E. S.; Bougrov, V. E. [National Research University of Information Technologies, Mechanics and Optics (Russian Federation); Kurochkin, A. S.; Gladyshev, A. G.; Babichev, A. V. [Connector Optics LLC (Russian Federation); Gadzhiev, I. M.; Buyalo, M. S. [National Research University of Information Technologies, Mechanics and Optics (Russian Federation); Zadiranov, Yu. M.; Usikova, A. A., E-mail: anton@beam.ioffe.ru; Shernyakov, Yu. M. [Russian Academy of Sciences, Ioffe Physical–Technical Institute (Russian Federation); Savelyev, A. V.; Nyapshaev, I. A. [National Research University of Information Technologies, Mechanics and Optics (Russian Federation); Egorov, A. Yu. [Connector Optics LLC (Russian Federation)

2016-10-15

The results of experimental studies of the gain properties of “thin” (3.2 nm thick) elastically strained InGaAs/InGaAlAs quantum wells emitting in the near-infrared spectral region near 1550 nm are presented. The results of studying the threshold and gain characteristics of stripe laser diodes with active regions based on “thin” quantum wells with a lattice–substrate mismatch of +1.0% show that the quantum wells under study exhibit a high modal gain of 11 cm{sup –1} and a low transparency current density of 46 A/cm{sup 2} per quantum well.

27 CFR 20.144 - Packages of completely denatured alcohol.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Packages of completely denatured alcohol. 20.144 Section 20.144 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS DISTRIBUTION AND USE OF DENATURED ALCOHOL AND RUM Sale...

Toxicity of 144Ce inhaled in a relatively insoluble form by beagle dogs

International Nuclear Information System (INIS)

Boecker, B.B.; Hahn, F.F.; Muggenburg, B.A.; Mauderly, J.L.; McClellan, R.O.; Pickrell, J.A.

1980-01-01

The metabolism, dosimetry and effects of 144 Ce inhaled in fused aluminosilicate particles are being investigated in the beagle dog to assess the long-term biological consequences of release of relatively insoluble aerosol forms of 144 Ce that could occur in nuclear accidents. The effects resulting from the relatively protracted radiation dose patterns to the lung from this form of 144 Ce are being compared with effects of other radiation dose patterns to the lung. One hundred eleven dogs were exposed to aerosols of 144 Ce in fused aluminosilicate particles to yield initial lung burdens of 0.0024 to 210 μCi/kg body weight and 15 control dogs were exposed to nonradioactive fused aluminosilicate particles. To date, 65 144 Ce-exposed and 2 control dogs have died or were euthanized at 143 to 4578 days after inhalation of 144 Ce. Prominent findings in the 144 Ce-exposed dogs were radiation pneumonitis in 17 dogs that died at early times and neoplastic disease in 39 of the 48 dogs that died 750 days or later. Observations are continuing on the 46 144 Ce-exposed and 13 control dogs remaining alive at this time, at least 3337 days after exposure

Intravenous miR-144 inhibits tumor growth in diethylnitrosamine-induced hepatocellular carcinoma in mice.

Science.gov (United States)

He, Quan; Wang, Fangfei; Honda, Takashi; Lindquist, Diana M; Dillman, Jonathan R; Timchenko, Nikolai A; Redington, Andrew N

2017-10-01

Previous in vitro studies have demonstrated that miR-144 inhibits hepatocellular carcinoma cell proliferation, invasion, and migration. We have shown that miR-144, injected intravenously, is taken up by the liver and induces endogenous hepatic synthesis of miR-144. We hypothesized that administered miR-144 has tumor-suppressive effects on liver tumor development in vivo. The effects of miR-144 on tumorigenesis and tumor growth were tested in a diethylnitrosamine-induced hepatocellular carcinoma mouse model. MiR-144 injection had no effect on body weight but significantly reduced diethylnitrosamine-induced liver enlargement compared with scrambled microRNA. MiR-144 had no effect on diethylnitrosamine-induced liver tumor number but reduced the tumor size above 50%, as evaluated by magnetic resonance imaging (scrambled microRNA 23.07 ± 5.67 vs miR-144 10.38 ± 2.62, p hepatocellular carcinoma tumorigenesis. Exogenously delivered miR-144 may be a therapeutic strategy to suppress tumor growth in hepatocellular carcinoma.

Increase of the photosensitivity of undoped poly(methylmethacrylate) under UV radiation at 325 nm

DEFF Research Database (Denmark)

Sáez-Rodríguez, D.; Nielsen, Kristian; Bang, Ole

2014-01-01

in undoped PMMA mPOFs with a hexagonal structure of three rings in the inner cladding. Two sets of FBGs were inscribed at two different resonant wavelengths (827 nm and 1562 nm) at different strains using an UV He-Cd laser at 325 nm focused by a lens and scanned over the fibre. We observed an increase...

40 CFR 144.79 - General.

Science.gov (United States)

2010-07-01

... the Underground Injection Control (UIC) Program established under the Safe Drinking Water Act. This... INJECTION CONTROL PROGRAM Requirements for Owners and Operators of Class V Injection Wells § 144.79 General. This subpart tells you what requirements apply if you own or operate a Class V injection well. You may...

Mutation induction by 365-nm radiation and far-ultraviolet light in Escherichia coli differing in near- and far-ultraviolet light sensitivity

International Nuclear Information System (INIS)

Leonardo, J.M.; Reynolds, P.R.; Tuveson, R.W.

1984-01-01

The his-4 locus derived from Escherichia coli strain AB1157 has been transduced into 4 E. coli strains that exhibit all 4 possible combinations of genes controlling sensitivity to near-ultraviolet light (nur versus nur + ) and far-ultraviolet light (uvrA6 versus uvrA + ). The 4 strains exhibited the predicted sensitivity to 254-nm radiation based on the sensitivity of the parent strains from which they were derived and the frequency of his + mutations predicted from experiments with AB1157 from which the his-4 locus was derived. When the 4 strains were treated with 365-nm radiation, they exhibited the predicted sensitivity based on the near-ultraviolet light sensitivity of the strains from which they were derived while his + mutations were undetectable with the 4 strains as well as with strain AB1157. When treated with 365-nm radiation, cells of a WP2sub(s) strain (a derivative of B/r transduced to his-4) plated on semi-enriched medium prepared with casamino acids did not yield induced mutations, whereas plating on semi-enriched medium prepared with nutrient broth did yield mutants at both the his-4 and trp loci at frequencies at least an order of magnitude lower than that observed with far-ultraviolet light. The induction of nutritionally independent mutants by 365-nm radiation is strongly dependent on the supplement used for semi-enrichment. When compared at equivalent survival levels, mutant frequencies are significantly less following 365-nm radiation when compared with far-ultraviolet radiation. (Auth.)

27 CFR 44.144 - Opening.

Science.gov (United States)

2010-04-01

... PAYMENT OF TAX, OR WITH DRAWBACK OF TAX Operations by Export Warehouse Proprietors Inventories § 44.144 Opening. An opening inventory shall be made by the export warehouse proprietor at the time of commencing... permit issued under § 44.93. A similar inventory shall be made by the export warehouse proprietor when he...

29 CFR 500.144 - Civil money penalties-payment and collection.

Science.gov (United States)

2010-07-01

... 29 Labor 3 2010-07-01 2010-07-01 false Civil money penalties-payment and collection. 500.144... LABOR REGULATIONS MIGRANT AND SEASONAL AGRICULTURAL WORKER PROTECTION Enforcement § 500.144 Civil money... promptly the amount thereof, as finally determined, to the Secretary by certified check or by money order...

Metabolism of cerium 144 in rat. Distribution - elimination - dosimetry

International Nuclear Information System (INIS)

Remy, Jacques

1959-01-01

This academic report concerns a study during which cerium 144 has been intravenously injected to three-month old rats under the form of cerium chloride in aqueous solution with pH of 9,5. Rats have then been sacrificed at different times after the injection, and organ or tissue samplings have been performed to study the isotope distribution in their bodies. This allowed the calculation of internal irradiation doses locally received by the animal, and also to identify critical organs with respect to cerium 144. Thus, until the twentieth day after injection, liver is the critical organ. After, it is the skeleton, for the rest of the animal's life. The bone internal irradiation is the highest danger for an internal cerium 144 contamination, due to threats on body hematopoietic functions [fr

Axial strain in GaAs/InAs core-shell nanowires

Energy Technology Data Exchange (ETDEWEB)

Biermanns, Andreas; Pietsch, Ullrich [Universitaet Siegen, Festkoerperphysik, 57068 Siegen (Germany); Rieger, Torsten; Gruetzmacher, Detlev; Ion Lepsa, Mihail [Peter Gruenberg Institute (PGI-9), Forschungszentrum, 52425 Juelich (Germany); JARA-Fundamentals of Future Information Technology, 52425 Juelich (Germany); Bussone, Genziana [Universitaet Siegen, Festkoerperphysik, 57068 Siegen (Germany); ESRF, 6 rue Jules Horowitz, BP220, F-38043 Grenoble Cedex (France)

2013-01-28

We study the axial strain relaxation in GaAs/InAs core-shell nanowire heterostructures grown by molecular beam epitaxy. Besides a gradual strain relaxation of the shell material, we find a significant strain in the GaAs core, increasing with shell thickness. This strain is explained by a saturation of the dislocation density at the core-shell interface. Independent measurements of core and shell lattice parameters by x-ray diffraction reveal a relaxation of 93% in a 35 nm thick InAs shell surrounding cores of 80 nm diameter. The compressive strain of -0.5% compared to bulk InAs is accompanied by a tensile strain up to 0.9% in the GaAs core.

Atomistic Simulations of Functional Au-144(SR)(60) Gold Nanoparticles in Aqueous Environment

DEFF Research Database (Denmark)

Heikkila, E.; Gurtovenko, A. A.; Martinez-Seara, H.

2012-01-01

and Cl-/Na+ counterions, respectively. The radial distribution functions show that the side chains and terminal groups show significant flexibility. The orientation of water is distinct in the first solvation shell, and AuNPs cause a long-range effect in the solvent structure. The radial electrostatic...... of the nanoparticle together with surrounding ions and water. We focus on Au-144 nanoparticles that comprise a nearly spherical Au core (diameter similar to 2 nm), a passivating Au-S interface, and functionalized alkanethiol chains. Cationic and anionic AuNPs have been modeled with amine and carboxyl terminal groups...... in aqueous solutions. They suggest that electrostatics is one of the central factors in complexation of AuNPs with other nanomaterials and biological systems, and that effects of electrostatics as water-mediated interactions are relatively long-ranged, which likely plays a role in, e.g., the interplay...

Investigations of a Dual Seeded 1178 nm Raman Laser System

Science.gov (United States)

2016-01-14

was obtained by Raman amplification of a distributed feedback diode laser in a variably strained polarization- maintaining fiber with a record-high...Calia, D.B., “50W CW visible laser source at 589 nm obtained via frequency doubling of three coherently combined narrow-band Raman fiber amplifiers...AFRL-RD-PS- TP-2016-0009 AFRL-RD-PS- TP-2016-0009 INVESTIGATIONS OF A DUAL SEEDED 1178 NM RAMAN LASER SYSTEM Leanne Henry, et al. 14 January

Optical response characteristics of strained uniform fiber Bragg grating using laser diode

Science.gov (United States)

Setiono, Andi; Widiyatmoko, Bambang; Purnamaningsih, Retno Wigajatri

2015-01-01

The working principle of the FBG strain sensor using laser diode (λ = 1551.9 - 1553 nm) as a light source is reported. Experimental results show that by straining the bare uniform FBG (λB = 1552 nm) for every 0.01 mm in room temperature, the transmitted and refelcted power were varied according to the state of FBG strains.

Sensitivity of strains of Escherichia coli differing in repair capability to far UV, near UV and visible radiations

International Nuclear Information System (INIS)

Webb, R.B.; Brown, M.S.

1976-01-01

In stationary phase, strains of Escherichia coli deficient in excision (B/r Hcr) or recombination repair (K12 AB2463) were more sensitive than a repair proficient strain (B/r) to monochromatic near-ultraviolet (365nm) and visible (460 nm) radiations. The relative increase in sensitivity of mutants deficient in excision or recombination repair in comparison to the wildtype, was less at 365 nm than at 254 nm. However, a strain deficient in both excision and recombination repair (K12 AB2480) showed a large, almost equal, increase in sensitivity over mutants deficient in either excision or recombination repair at 365 nm and 254 nm. All strains tested were highly resistant to 650 nm radiation. Action spectra for lethality of strains B/r and B/r Hcr in stationary phase reveal small peaks or shoulders in the 330 to 340, 400 to 410 and 490 to 510 nm wavelength ranges. The presence of 5 micro g/ml acriflavine (an inhibitor of repair) in the plating medium greatly increased the sensitivity of strain B/r to radiation at 254, 365 and 460 nm, while strains E.coli B/r Hcr and K12 AB2463 were sensitized by small amounts. At each of the wavelengths tested, acriflavine in the plating medium had at most a small effect on E.coli K12 AB2480. Acriflavine failed to sensitize any strain tested at 650 nm. Evidence supports the interpretation that lesions induced in DNA by 365 nm and 460 nm radiations play the major role in the inactivation of E.coli by these wavelengths. Single-strand breaks (or alkali-labile bonds), but not pyrimidine dimers are candidates for the lethal DNA lesions in uvrA and repair proficient strains. At high fluences lethality may be enhanced by damage to the excision and recombination repair systems. (author)

Sensitivity of strains of Escherichia coli differing in repair capability to far uv, near uv and visible radiations

Energy Technology Data Exchange (ETDEWEB)

Webb, R B; Brown, M S [Argonne National Lab., Ill. (USA)

1976-11-01

In stationary phase, strains of Escherichia coli deficient in excision (B/r Hcr) or recombination repair (K12 AB2463) were more sensitive than a repair proficient strain (B/r) to monochromatic near-ultraviolet (365nm) and visible (460 nm) radiations. The relative increase in sensitivity of mutants deficient in excision or recombination repair in comparison to the wildtype, was less at 365 nm than at 254 nm. However, a strain deficient in both excision and recombination repair (K12 AB2480) showed a large, almost equal, increase in sensitivity over mutants deficient in either excision or recombination repair at 365 nm and 254 nm. All strains tested were highly resistant to 650 nm radiation. Action spectra for lethality of strains B/r and B/r Hcr in stationary phase reveal small peaks or shoulders in the 330 to 340, 400 to 410 and 490 to 510 nm wavelength ranges. The presence of 5 micro g/ml acriflavine (an inhibitor of repair) in the plating medium greatly increased the sensitivity of strain B/r to radiation at 254, 365 and 460 nm, while strains E.coli B/r Hcr and K12 AB2463 were sensitized by small amounts. At each of the wavelengths tested, acriflavine in the plating medium had at most a small effect on E.coli K12 AB2480. Acriflavine failed to sensitize any strain tested at 650 nm. Evidence supports the interpretation that lesions induced in DNA by 365 nm and 460 nm radiations play the major role in the inactivation of E.coli by these wavelengths. Single-strand breaks (or alkali-labile bonds), but not pyrimidine dimers are candidates for the lethal DNA lesions in uvrA and repair proficient strains. At high fluences lethality may be enhanced by damage to the excision and recombination repair systems.

Toxicity of 144Ce inhaled in a relatively insoluble form by aged beagle dogs

International Nuclear Information System (INIS)

Boecker, B.B.; Hahn, F.F.; Muggenburg, B.A.; Mauderly, J.L.; McClellan, R.O.; Pickrell, J.A.

1980-01-01

The toxicity of relatively insoluble 144 Ce inhaled by 8- to 10.5-year-old beagle dogs is being investigated to provide information on possible age-related differences in the resulting long-term biological responses. Forty-two dogs were exposed, nose-only, to aerosols of 144 Ce in fused aluminosilicate particles to yield initial lung burdens of 2.2 to 75 μCi 144 Ce/kg body weight, and 12 control dogs were exposed to nonradioactive fused aluminosilicate particles. To date, 38 144 Ce-exposed dogs and 10 control dogs have died or were euthanized between 197 and 2375 days after inhalation of the 144 Ce. Prominent findings in the 144 Ce-exposed dogs were radiation pneumonitis in 19 dogs that died during the first 943 days post-exposure and neoplastic disease in seven of the 15 dogs. However, only one of these tumors killed the dog. No hemangiosarcomas have been observed in this study, although they were a prominent finding in immature or young adult dogs exposed to 144 Ce. Observations are continuing on the four surviving 144 Ce-exposed and two control dogs

A Two-Component Regulatory System, CsrR-CsrS, Represses Expression of Three Streptococcus pyogenes Virulence Factors, Hyaluronic Acid Capsule, Streptolysin S, and Pyrogenic Exotoxin B

OpenAIRE

Heath, Andrew; DiRita, Victor J.; Barg, Neil L.; Engleberg, N. Cary

1999-01-01

Certain Tn916 insertions in the chromosome of an M1-type, nonmucoid Streptococcus pyogenes isolate (MGAS166) were previously shown to result in stable mucoidy with increased expression of the capsular synthetic genes. The transposon insertions in these strains are directly upstream of an apparent operon encoding a two-component regulatory system, designated csrR-csrS. Compared with MGAS166, these mucoid mutants are more hemolytic and cause significantly more tissue damage in a murine model of...

Tunable Polymer Fiber Bragg Grating (FBG) Inscription: Fabrication of Dual-FBG Temperature Compensated Polymer Optical Fiber Strain Sensors

DEFF Research Database (Denmark)

Yuan, Scott Wu; Stefani, Alessio; Bang, Ole

2012-01-01

We demonstrate stable wavelength tunable inscription of polymer optical fiber Bragg gratings (FBGs). By straining the fiber during FBG inscription, we linearly tune the center wavelength over 7 nm with less than 1% strain. Above 1% strain, the tuning curve saturates and we show a maximum tuning...... of 12 nm with 2.25% strain. We use this inscription method to fabricate a dual-FBG strain sensor in a poly (methyl methacrylate) single-mode microstructured polymer optical fiber and demonstrate temperature compensated strain sensing around 850 nm....

Genetic control of near-UV (300-400 nm) sensitivity independent of the recA gene in strains of Escherichia coli K12

International Nuclear Information System (INIS)

Tuveson, R.W.; Jonas, R.B.

1979-01-01

Stationary cells of isogenic pairs of Escherichia coli K12 strains presumably differing only in the recA function, were inactivated with near-UV (300-400 nm) radiation. Based on near-UV inactivation kinetics, the strains can be divided into two discrete categories in which near-UV sensitivity does not necessarily correlate with far-UV sensitivity conferred by two different recA alleles. Lack of overlap between near-UV and far-UV (recA) sensitivity can be explained by assuming that a different chromosomal gene (nur) controls near-UV sensitivity. Support for this hypothesis came from a mating experiment in which four selected recombinants, isogenic with respect to auxotrophic markers, were identified exhibiting all four possible combinations of far-UV (recA1 vs recA + ) and near-UV sensitivity (nur vs nur + ). Transduction with phase P1 showed that introduction of the recA1 allele into a recA + recipient did not affect the near-UV sensitivity of the recipient. Additional matings together with transduction experiments suggested that the nur gene is located at a position on the E. coli linkage map clearly separable from recA (minute 58). (author)

High-Tg TOPAS mPOF strain sensing at 110 degrees

DEFF Research Database (Denmark)

Nielsen, Kristian; Markos, Christos; Stefani, Alessio

2013-01-01

We demonstrate a mPOF made of high-Tg TOPAS grade 5013 with Tg = 135°C. We inscribe FBGs into the fiber and demonstrate strain sensing of 2.5% strain at 98°C, further we also demonstrate strain sensing at a record high temperature of 110°C. The Bragg wavelengths of the FBGs are around 860 nm, whe...... the propagation loss is 5.1dB/m, close to the fiber loss minimum of 3.67dB/m at 787nm....

Electron multibeam technology for mask and wafer writing at 0.1 nm address grid

Science.gov (United States)

Platzgummer, Elmar; Klein, Christof; Loeschner, Hans

2013-07-01

IMS Nanofabrication realized a 50 keV electron multibeam proof-of-concept (POC) tool confirming writing principles with 0.1 nm address grid and lithography performance capability. The POC system achieves the predicted 5 nm 1 sigma blur across the 82 μm×82 μm array of 512×512 (262,144) programmable 20 nm beams. 24-nm half pitch (HP) has been demonstrated and complex patterns have been written in scanning stripe exposure mode. The first production worthy system for the 11-nm HP mask node is scheduled for 2014 (Alpha), 2015 (Beta), and first-generation high-volume manufacturing multibeam mask writer (MBMW) tools in 2016. In these MBMW systems the max beam current through the column is 1 μA. The new architecture has also the potential for 1× mask (master template) writing. Substantial further developments are needed for maskless e-beam direct write (EBDW) applications as a beam current of >2 mA is needed to achieve 100 wafer per hour industrial targets for 300 mm wafer size. Necessary productivity enhancements of more than three orders of magnitude are only possible by shrinking the multibeam optics such that 50 to 100 subcolumns can be placed on the area of a 300 mm wafer and by clustering 10 to 20 multicolumn tools. An overview of current EBDW efforts is provided.

26 CFR 1.4-4 - Short taxable year caused by death.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 1 2010-04-01 2010-04-01 true Short taxable year caused by death. 1.4-4 Section... Normal Taxes and Surtaxes § 1.4-4 Short taxable year caused by death. An individual making a return for a... results from the death of the taxpayer. Tax on Corporations ...

Observation of dipole bands in 144Sm

International Nuclear Information System (INIS)

Raut, R.; Ganguly, S.; Kshetri, R.; Banerjee, P.; Bhattacharya, S.; Dasmahapatra, B.; Mukherjee, A.; Sahasarkar, M.; Goswami, A.; Basu, S.K.; Bhattacharjee, T.; Mukherjee, G.; Chakraborty, A.; Ghughre, S.S.; Krishichayan; Mukhopadhyay, S.; Gangopadhyay, G.; Singh, A.K.

2007-01-01

The nucleus 144 Sm (Z=62, N=82), with its proximity to the shell closure and possibilities of particles and holes occupying high j orbitals, following appropriate excitations, is a suitable system for observation of dipole (MR) bands

27 CFR 70.144 - Special rules.

Science.gov (United States)

2010-04-01

..., under local law, one person is subrogated to the rights of another with respect to a lien or interest, such person shall be subrogated to such rights for purposes of any lien imposed by 26 U.S.C. 6321 or... Excise and Special (Occupational) Tax Lien for Taxes § 70.144 Special rules. (a) Actual notice or...

High strain rate tensile properties of annealed 2 1/4 Cr--1 Mo steel

International Nuclear Information System (INIS)

Klueh, R.L.; Oakes, R.E. Jr.

1975-01-01

The high strain rate tensile properties of annealed 2 1 / 4 Cr-1 Mo steel were determined and the tensile behavior from 25 to 566 0 C and strain rates of 2.67 x 10 -6 to 144/s were described. Above 0.1/s at 25 0 C, both the yield stress and the ultimate tensile strength increased rapidly with increasing strain rate. As the temperature was increased, a dynamic strain aging peak appeared in the ultimate tensile strength-temperature curves. The peak height was a maximum at about 350 0 C and 2.67 x 10 -6 /s. With increasing strain rate, a peak of decreased height occurred at progressively higher temperatures. The major effect of strain rate on ductility occurred at elevated temperatures, where a decrease in strain rate caused an increase in total elongation and reduction in area

Beta-spectrometer with Si-detectors for the study of 144Ce-144Pr decays

Science.gov (United States)

Alexeev, I. E.; Bakhlanov, S. V.; Bazlov, N. V.; Chmel, E. A.; Derbin, A. V.; Drachnev, I. S.; Kotina, I. M.; Muratova, V. N.; Pilipenko, N. V.; Semyonov, D. A.; Unzhakov, E. V.; Yeremin, V. K.

2018-05-01

Here we present the specifications of a newly developed beta-spectrometer, based on full absorption Si(Li) detector and thin transmission detector, allowing one to perform efficient separation beta-radiation and accompanying X-rays and gamma radiation. Our method is based on registration of coincident events from both detectors. The spectrometer can be used for precision measurements of various beta-spectra, namely for the beta-spectrum shape study of 144Pr, which is considered to be an advantageous anti-neutrino source for sterile neutrino searches.

Contents of 90Sr, 137Cs and 144Ce in tea

International Nuclear Information System (INIS)

Sha Lianmao; Qiu Yundian; Wang Zhihui; Wang Fenghua

1996-01-01

The determination results of 90 Sr, 137 Cs and 144 Ce contents in 18 kinds of tea goods are reported. The tea samples were pretreated by ashing and analyzed by combined radiochemical procedure. the results showed the average contents of 90 Sr, 137 Cs and 144 Ce in tea goods available in 1985 are 17, 2.2 and 0.8 Bq/kg respectively

40 CFR 144.86 - What are the definitions I need to know?

Science.gov (United States)

2010-07-01

... systems that provide water to schools, day care centers, government/military installations, manufacturers... 40 Protection of Environment 22 2010-07-01 2010-07-01 false What are the definitions I need to know? 144.86 Section 144.86 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER...

Toxicity of 144Ce inhaled in a relatively insoluble form by aged Beagle dogs. X

International Nuclear Information System (INIS)

Boecker, B.B.; Hahn, F.F.; Muggenburg, B.A.; Mauderly, J.L.; McClellan, R.O.; Pickrell, J.A.

1981-01-01

The toxicity of relatively insoluble 144 Ce inhaled by 8- to 10.5-year old Beagle dogs is being investigated to provide possible age-related differences in long-term biological responses. Forty-two dogs were exposed, nose-only, to aerosols of 144 Ce in fused aluminosilicate particles to yield initial lung burdens of 2.2 to 75 μCi 144 Ce/kg body weight, and 12 control dogs were exposed to nonradioactive fused aluminosilicate particles. To date, 39 144 Ce-exposed dogs and 10 control dogs have died or were euthanized between 197 and 2375 days after the inhalation exposure. Prominent findings in the 144 Ce-exposed dogs were radiation pneumonitis in 19 of the 23 dogs that died during the first 943 days after exposure and neoplastic disease in nine of the 16 dogs that died beyond 943 days after exposure. Pulmonary tumors were found in four of these dogs. Observations are continuing on the three surviving 144 Ce-exposed and two control dogs

Challenges with current inhaled treatments for chronic Pseudomonas aeruginosa infection in patients with cystic fibrosis.

LENUS (Irish Health Repository)

Greally, Peter

2012-06-01

Pseudomonas aeruginosa (Pa) is the predominant pathogen infecting the airways of patients with cystic fibrosis (CF). Initial colonization is usually transient and associated with non-mucoid strains, which can be eradicated if identified early. This strategy can prevent, or at least delay, chronic Pa infection, which eventually develops in the majority of patients by their late teens or early adulthood. This article discusses the management and latest treatment developments of Pa lung infection in patients with CF, with a focus on nebulized antibiotic therapy.

11 CFR 100.144 - Office building for State, local, or district party committees or organizations.

Science.gov (United States)

2010-01-01

... 11 Federal Elections 1 2010-01-01 2010-01-01 false Office building for State, local, or district party committees or organizations. 100.144 Section 100.144 Federal Elections FEDERAL ELECTION COMMISSION GENERAL SCOPE AND DEFINITIONS (2 U.S.C. 431) Exceptions to Expenditures § 100.144 Office building for...

Influence of strain on the growth of thick InGaN layers

International Nuclear Information System (INIS)

Stellmach, J.; Leyer, M.; Pristovsek, M.; Kneissl, M.

2008-01-01

The growth of high quality InGaN alloys is critical for a number of various optoelectronic device applications like LEDs and laser diodes. Nevertheless, the exact growth mechanisms of InGaN with high indium content is still not fully understood. In the present study the growth of thick InGaN layers was systematically investigated. InGaN films with thicknesses between ∝35 nm and ∝200 nm were grown on GaN templates with metal-organic vapour phase epitaxy (MOVPE). The group III partial pressures of 1.1 Pa for TMGa, 0.45 Pa for TMIn and the V/III-ratio of 1600 were kept constant. The growth temperature was varied between 750 C and 800 C. The growth of InGaN layer was characterized by in-situ spectroscopic ellipsometry (SE). Up to temperatures of 790 C structural analysis by XRD showed two strained layers with different indium content. The formation of the layer structure was investigated by varying the growth times at 770 C. In the first 500 s (35 nm) a rough (rms=9 nm) and pseudomorphically strained InGaN layer with low indium content (4%) is formed. Between 500 s and 1000 s this strained layer becomes smoother (rms=3.4 nm). For thicknesses beyond the In content increases (8% at 84 nm) and reaches 11% at 200 nm. We propose that the transition from a first layer with a low indium content to a second layer with an higher indium content is due to a gradual release of strain

Engineering Nanowire n-MOSFETs at L_{g}<8 nm

Science.gov (United States)

Mehrotra, Saumitra R.; Kim, SungGeun; Kubis, Tillmann; Povolotskyi, Michael; Lundstrom, Mark S.; Klimeck, Gerhard

2013-07-01

As metal-oxide-semiconductor field-effect transistors (MOSFET) channel lengths (Lg) are scaled to lengths shorter than Lg<8 nm source-drain tunneling starts to become a major performance limiting factor. In this scenario a heavier transport mass can be used to limit source-drain (S-D) tunneling. Taking InAs and Si as examples, it is shown that different heavier transport masses can be engineered using strain and crystal orientation engineering. Full-band extended device atomistic quantum transport simulations are performed for nanowire MOSFETs at Lg<8 nm in both ballistic and incoherent scattering regimes. In conclusion, a heavier transport mass can indeed be advantageous in improving ON state currents in ultra scaled nanowire MOSFETs.

Genetic Virulence Profile of Enteroaggregative Escherichia coli Strains Isolated from Danish Children with Either Acute or Persistent Diarrhea

Science.gov (United States)

Hebbelstrup Jensen, Betina; Poulsen, Anja; Hebbelstrup Rye Rasmussen, Stig; Struve, Carsten; Engberg, Jørgen H.; Friis-Møller, Alice; Boisen, Nadia; Jønsson, Rie; Petersen, Randi F.; Petersen, Andreas M.; Krogfelt, Karen A.

2017-01-01

Enteroaggregative Escherichia coli (EAEC) is frequently found in diarrheal stools worldwide. It has been associated with persistent diarrhea, weight loss, and failure to thrive in children living in developing countries. A number of important EAEC virulence genes are identified; however, their roles in acute and persistent diarrhea have not been previously investigated. The aim of this study was to identify specific EAEC virulence genes associated with duration and type of diarrhea in Danish children. We aimed to improve the current diagnostics of EAEC and enable targeting of strains with an expected severe disease course. Questionnaires answered by parents provided information regarding duration of diarrhea and presence of blood or mucus. A total of 295 EAEC strains were collected from children with acute (≤7 days) and persistent diarrhea (≥14 days) and were compared by using multiplex PCR targeting the genes sat, sepA, pic, sigA, pet, astA, aatA, aggR, aaiC, aap, agg3/4C, ORF3, aafA, aggA, agg3A, agg4A, and agg5A. Furthermore, the distribution of EAEC genes in strains collected from cases of bloody, mucoid, and watery diarrhea was investigated. The classification and regression tree analysis (CART) was applied to investigate the relationship between EAEC virulence genes and diarrheal duration and type. Persistent diarrhea was associated with strains lacking the pic gene (p = 0.002) and with the combination of the genes pic, sat, and absence of the aggA gene (p = 0.05). Prolonged diarrhea was associated with the combination of the genes aatA and astA (p = 0.03). Non-mucoid diarrhea was associated with strains lacking the aatA gene (p = 0.004). Acute diarrhea was associated with the genes aggR, aap, and aggA by individual odds ratios. Resistance toward gentamicin and ciprofloxacin was observed in 7.5 and 3% of strains, respectively. Multi-drug resistance was observed in 38% of strains. Genetic host factors have been associated with an increased risk of EAEC

Genetic Virulence Profile of Enteroaggregative Escherichia coli Strains Isolated from Danish Children with Either Acute or Persistent Diarrhea.

Science.gov (United States)

Hebbelstrup Jensen, Betina; Poulsen, Anja; Hebbelstrup Rye Rasmussen, Stig; Struve, Carsten; Engberg, Jørgen H; Friis-Møller, Alice; Boisen, Nadia; Jønsson, Rie; Petersen, Randi F; Petersen, Andreas M; Krogfelt, Karen A

2017-01-01

Enteroaggregative Escherichia coli (EAEC) is frequently found in diarrheal stools worldwide. It has been associated with persistent diarrhea, weight loss, and failure to thrive in children living in developing countries. A number of important EAEC virulence genes are identified; however, their roles in acute and persistent diarrhea have not been previously investigated. The aim of this study was to identify specific EAEC virulence genes associated with duration and type of diarrhea in Danish children. We aimed to improve the current diagnostics of EAEC and enable targeting of strains with an expected severe disease course. Questionnaires answered by parents provided information regarding duration of diarrhea and presence of blood or mucus. A total of 295 EAEC strains were collected from children with acute (≤7 days) and persistent diarrhea (≥14 days) and were compared by using multiplex PCR targeting the genes sat, sepA, pic, sigA, pet, astA, aatA, aggR, aaiC, aap, agg3/4C, ORF3, aafA, aggA, agg3A, agg4A , and agg5A . Furthermore, the distribution of EAEC genes in strains collected from cases of bloody, mucoid, and watery diarrhea was investigated. The classification and regression tree analysis (CART) was applied to investigate the relationship between EAEC virulence genes and diarrheal duration and type. Persistent diarrhea was associated with strains lacking the pic gene ( p = 0.002) and with the combination of the genes pic, sat , and absence of the aggA gene ( p = 0.05). Prolonged diarrhea was associated with the combination of the genes aatA and astA ( p = 0.03). Non-mucoid diarrhea was associated with strains lacking the aatA gene ( p = 0.004). Acute diarrhea was associated with the genes aggR, aap , and aggA by individual odds ratios. Resistance toward gentamicin and ciprofloxacin was observed in 7.5 and 3% of strains, respectively. Multi-drug resistance was observed in 38% of strains. Genetic host factors have been associated with an increased risk of

Genetic Virulence Profile of Enteroaggregative Escherichia coli Strains Isolated from Danish Children with Either Acute or Persistent Diarrhea

Directory of Open Access Journals (Sweden)

Betina Hebbelstrup Jensen

2017-05-01

Full Text Available Enteroaggregative Escherichia coli (EAEC is frequently found in diarrheal stools worldwide. It has been associated with persistent diarrhea, weight loss, and failure to thrive in children living in developing countries. A number of important EAEC virulence genes are identified; however, their roles in acute and persistent diarrhea have not been previously investigated. The aim of this study was to identify specific EAEC virulence genes associated with duration and type of diarrhea in Danish children. We aimed to improve the current diagnostics of EAEC and enable targeting of strains with an expected severe disease course. Questionnaires answered by parents provided information regarding duration of diarrhea and presence of blood or mucus. A total of 295 EAEC strains were collected from children with acute (≤7 days and persistent diarrhea (≥14 days and were compared by using multiplex PCR targeting the genes sat, sepA, pic, sigA, pet, astA, aatA, aggR, aaiC, aap, agg3/4C, ORF3, aafA, aggA, agg3A, agg4A, and agg5A. Furthermore, the distribution of EAEC genes in strains collected from cases of bloody, mucoid, and watery diarrhea was investigated. The classification and regression tree analysis (CART was applied to investigate the relationship between EAEC virulence genes and diarrheal duration and type. Persistent diarrhea was associated with strains lacking the pic gene (p = 0.002 and with the combination of the genes pic, sat, and absence of the aggA gene (p = 0.05. Prolonged diarrhea was associated with the combination of the genes aatA and astA (p = 0.03. Non-mucoid diarrhea was associated with strains lacking the aatA gene (p = 0.004. Acute diarrhea was associated with the genes aggR, aap, and aggA by individual odds ratios. Resistance toward gentamicin and ciprofloxacin was observed in 7.5 and 3% of strains, respectively. Multi-drug resistance was observed in 38% of strains. Genetic host factors have been associated with an increased risk

Toxicity of 144Ce fused clay particles inhaled by aged dogs. III

International Nuclear Information System (INIS)

Hahn, F.F.; Boecker, B.B.; Hobbs, C.H.; Jones, R.K.; McClellan, R.O.; Pickrell, J.A.

1974-01-01

The toxicity of 144 Ce fused clay particles inhaled by 8- to 10.5-year-old dogs is being investigated to provide information on age-related differences in the response of older members of the human population to accidental inhalation of radioactive aerosols. These data on aged dogs will be compared to the results of similar studies using dogs exposed at approximately 3 months or 12 to 14 months of age. To date, 7 blocks of 5 dogs each, divided into 4 exposure levels with mean initial lung burdens of 7.5, 14, 24, and 57 μCi/kg body weight and control dogs exposed to non-labeled fused clay particles have been entered into a longevity study. Twelve dogs with initial lung burdens ranging from 20 to 75 μCi 144 Ce/kg body weight and cumulative doses to lung of from 22,000 to 74,000 rads have died at 197 to 943 days post-inhalation with clinico-pathologic findings of radiation pneumonitis and pulmonary fibrosis. Two of these also had congestive heart failure. In addition, 4 dogs with ILBs of 8 to 14 μCi 144 Ce/kg body weight have died of mammary neoplasms or congestive heart failure but without radiation pneumonitis. One dog with an ILB of 9 μCi 144 Ce/kg body weight died with a chronic interstitial foreign body pneumonia. Two control dogs have died, one with a mammary carcinoma and one with pyometra. Pulmonary retention of the inhaled 144 Ce was similar to that observed previously in dogs exposed at 18 to 22 months of age in a radiation dose pattern study. Serial observations are continuing on the 11 surviving 144 Ce-exposed dogs and 5 controls. (U.S.)

7 CFR 1260.144 - Nominee's agreement to serve.

Science.gov (United States)

2010-01-01

....144 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING AGREEMENTS AND ORDERS; MISCELLANEOUS COMMODITIES), DEPARTMENT OF AGRICULTURE BEEF PROMOTION AND RESEARCH Beef Promotion and Research Order Cattlemen's Beef Promotion and Research Board...

TUG1 promotes osteosarcoma tumorigenesis by upregulating EZH2 expression via miR-144-3p.

Science.gov (United States)

Cao, Jiaqing; Han, Xinyou; Qi, Xin; Jin, Xiangyun; Li, Xiaolin

2017-10-01

lncRNA-TUG1 (Taurine upregulated 1) is up-regulated and highly correlated with poor prognosis and disease status in osteosarcoma. TUG1 knockdown inhibits osteosarcoma cell proliferation, migration and invasion, and promotes apoptosis. However, its mechanism of action has not been well addressed. Growing evidence documented that lncRNA works as competing endogenous (ce)RNAs to modulate the expression and biological functions of miRNA. As a putative combining target of TUG1, miR-144-3p has been associated with the progress of osteosarcoma. To verify whether TUG1 functions through regulating miR-144-3p, the expression levels of TUG1 and miR-144-3p in osteosarcoma tissues and cell lines were determined. TUG1 was upregulated in osteosarcoma tissues and cell lines, and negatively correlated with miR-144-3p. TUG1 knockdown induced miR-144-3p expression in MG63 and U2OS cell lines. Results from dual luciferase reporter assay, RNA-binding protein immuno-precipitation (RIP) and applied biotin-avidin pull-down system confirmed TUG1 regulated miR-144-3p expression through direct binding. EZH2, a verified target of miR-144-3p was upregulated in osteosarcoma tissues and negatively correlated with miR-144-3p. EZH2 was negatively regulated by miR-144-3p and positively regulated by TUG1. Gain-and loss-of-function experiments were performed to analyze the role of TUG1, miR-144-3p and EZH2 in the migration and EMT of osteosarcoma cells. EZH2 over-expression partly abolished TUG1 knockdown or miR-144-3p overexpression induced inhibition of migration and EMT in osteosarcoma cells. In addition, TUG1 knockdown represses the activation of Wnt/β-catenin pathway, which was reversed by EZH2 over-expression. The activator of Wnt/β-catenin pathway LiCl could partially block the TUG1-knockdown induced osteosarcoma cell migration and EMT inhibition. In conclusion, our results showed that TUG1 plays an important role in osteosarcoma development through miRNA-144-3p/EZH2/Wnt/β-catenin pathway.

38 CFR 21.144 - Vocational course in a sheltered workshop or rehabilitation facility.

Science.gov (United States)

2010-07-01

... workshop or rehabilitation facility may be an institutional, on-job, or combination course which has been... sheltered workshop or rehabilitation facility. 21.144 Section 21.144 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VOCATIONAL REHABILITATION AND EDUCATION Vocational Rehabilitation...

40 CFR 144.64 - Incapacity of owners or operators, guarantors, or financial institutions.

Science.gov (United States)

2010-07-01

..., guarantors, or financial institutions. 144.64 Section 144.64 Protection of Environment ENVIRONMENTAL..., or financial institutions. (a) An owner or operator must notify the Regional Administrator by... institution. The owner or operator must establish other financial assurance or liability coverage within 60...

Sub-10-nm suspended nano-web formation by direct laser writing

Science.gov (United States)

Wang, Sihao; Yu, Ye; Liu, Hailong; Lim, Kevin T. P.; Madurai Srinivasan, Bharathi; Zhang, Yong Wei; Yang, Joel K. W.

2018-06-01

A diffraction-limited three-dimensional (3D) direct laser writing (DLW) system based on two-photon polymerization can routinely pattern structures at the 100 nm length scale. Several schemes have been developed to improve the patterning resolution of 3D DLW but often require customized resist formulations or multi-wavelength exposures. Here, we introduce a scheme to produce suspended nano-webs with feature sizes below 10 nm in IP-Dip resist using sub-threshold exposure conditions in a commercial DLW system. The narrowest suspended lines (nano-webs) measured 7 nm in width. Larger ∼20 nm nano-webs were patterned with ∼80% yield at increased laser powers. In addition, closely spaced nano-gaps with a center-to-center distance of 33 nm were produced by patterning vertically displaced suspended lines followed by metal deposition and liftoff. We provide hypotheses and present preliminary results for a mechanism involving the initiation of a percolative path and a strain-induced narrowing in the nano-web formation. Our approach allows selective features to be patterned with dimensions comparable to the sub-10 nm patterning capability of electron-beam lithography (EBL).

Anisotropic strain relaxation in (Ba0.6Sr0.4)TiO3 epitaxial thin films

Science.gov (United States)

Simon, W. K.; Akdogan, E. K.; Safari, A.

2005-05-01

We have studied the evolution of anisotropic epitaxial strains in ⟨110⟩-oriented (Ba0.60Sr0.40)TiO3 paraelectric (m3m) thin films grown on orthorhombic (mm2) ⟨100⟩-oriented NdGaO3 by high-resolution x-ray diffractometry. All the six independent components of the three-dimensional strain tensor were measured in films with 25-1200-nm thickness, from which the principal stresses and strains were obtained. Pole figure analysis indicated that the epitaxial relations are [001]m3m‖[001]mm2 and [1¯10]m3m‖[010]mm2 in the plane of the film, and [110]m3m‖[100]mm2 along the growth direction. The dislocation system responsible for strain relief along [001] has been determined to be ∣b ∣(001)=3/4∣b∣. Strain relief along the [1¯10] direction, on the other hand, has been determined to be due to a coupled mechanism given by ∣b∣(1¯10)=∣b∣ and ∣b∣(1¯10)=√3 /4∣b∣. Critical thicknesses, as determined from nonlinear regression using the Matthews-Blakeslee equation, for misfit dislocation formation along [001] and [1¯10] direction were found to be 5 and 7 nm, respectively. The residual strain energy density was calculated as ˜2.9×106J/m3 at 25 nm, which was found to relax an order of magnitude by 200 nm. At 200 nm, the linear dislocation density along [001] and [1¯10] are ˜6.5×105 and ˜6×105cm-1, respectively. For films thicker than 600 nm, additional strain relief occurred through surface undulations, indicating that this secondary strain-relief mechanism is a volume effect that sets in upon cooling from the growth temperature.

Maximizing Tensile Strain in Germanium Nanomembranes for Enhanced Optoelectronic Properties

Science.gov (United States)

Sanchez Perez, Jose Roberto

Silicon, germanium, and their alloys, which provide the leading materials platform of microelectronics, are extremely inefficient light emitters because of their indirect fundamental energy band gap. This basic materials property has so far hindered the development of group-IV photonic-active devices, including light emitters and diode lasers, thereby significantly limiting our ability to integrate electronic and photonic functionalities at the chip level. Theoretical studies have predicted that tensile strain in Ge lowers the direct energy band gap relative to the indirect one, and that, with sufficient strain, Ge becomes direct-band gap, thus enabling facile interband light emission and the fabrication of Group IV lasers. It has, however, not been possible to impart sufficient strain to Ge to reach the direct-band gap goal, because bulk Ge fractures at much lower strains. Here it is shown that very thin sheets of Ge(001), called nanomembranes (NMs), can be used to overcome this materials limitation. Germanium nanomembranes (NMs) in the range of thicknesses from 20nm to 100nm were fabricated and then transferred and mounted to a flexible substrate [a polyimide (PI) sheet]. An apparatus was developed to stress the PI/NM combination and provide for in-situ Raman measurements of the strain as a function of applied stress. This arrangement allowed for the introduction of sufficient biaxial tensile strain (>1.7%) to transform Ge to a direct-band gap material, as determined by photoluminescence (PL) measurements and theory. Appropriate shifts in the emission spectrum and increases in PL intensities were observed. The advance in this work was nanomembrane fabrication technology; i.e., making thin enough Ge sheets to accept sufficiently high levels of strain without fracture. It was of interest to determine if the strain at which fracture ultimately does occur can be raised, by evaluating factors that initiate fracture. Attempts to assess the effect of free edges (enchant

40 CFR 144.89 - How do I close my Class V injection well?

Science.gov (United States)

2010-07-01

... well? 144.89 Section 144.89 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER... cesspool or motor vehicle waste disposal well, you must plug or otherwise close the well in a manner that..., sludge, liquids, or other materials removed from or adjacent to your well in accordance with all...

Studies on nanosecond 532nm and 355nm and ultrafast 515nm and 532nm laser cutting super-hard materials

Science.gov (United States)

Zhang, Jie; Tao, Sha; Wang, Brian; Zhao, Jay

2017-02-01

In this paper, micro-processing of three kinds of super-hard materials of poly-crystal diamond (PCD)/tungsten-carbide (WC), CVD-diamond and cubic boron nitride (CNB) has been systematically studied using nanosecond laser (532nm and 355nm), and ultrafast laser (532nm and 515nm). Our purpose is to investigate a full laser micro-cutting solution to achieve a ready-to-use cutting tool insert (CTI). The results show a clean cut with little burns and recasting at edge. The cutting speed of 2-10mm/min depending on thickness was obtained. The laser ablation process was also studied by varying laser parameters (wavelength, pulse width, pulse energy, repetition rate) and tool path to improve cutting speed. Also, studies on material removal efficiency (MRE) of PCD/WC with 355nm-ns and 515nm-fs laser as a function of laser fluence show that 355nm-ns laser is able to achieve higher MRE for PCD and WC. Thus, ultrafast laser is not necessarily used for superhard material cutting. Instead, post-polishing with ultrafast laser can be used to clean cutting surface and improve smoothness.

Sputum and serum microRNA-144 levels in patients with tuberculosis before and after treatment.

Science.gov (United States)

Lv, Yan; Guo, Shuai; Li, Xue-Gang; Chi, Jing-Yu; Qu, Yi-Qing; Zhong, Hai-Lai

2016-02-01

To measure the expression levels of sputum and serum microRNA-144 (miR-144) before and after the treatment of patients with tuberculosis (TB). Details of the cases of a total of 124 TB patients were collected at Qilu Hospital of Shandong University between April 2014 and April 2015. Fifty-three of these patients had sputum positive for bacteria and a cavity on imaging (group A), 20 patients had sputum negative for bacteria and a cavity on imaging (group B), and 51 patients had sputum negative for bacteria and no cavity on imaging (group C). One hundred seventeen healthy people who attended the hospital for a physical examination were recruited as controls. Quantitative real-time PCR (qRT-PCR) was used to measure the levels of sputum and serum miR-144 before anti-TB treatment and at 1 month after treatment. Before treatment, sputum and serum miR-144 expression levels in the TB patients were both higher than those of the controls (both p<0.05). After treatment, sputum and serum miR-144 levels in the TB patients were significantly lower than those measured before treatment (both p<0.05). The levels of sputum and serum miR-144 in the improved TB patients decreased significantly after treatment compared to those measured before treatment (both p<0.001). Significant differences were found in sputum and serum miR-144 levels in the TB patients, with or without improvement, compared with the healthy controls (all p<0.05). Sputum and serum miR-144 levels were significantly upregulated in the TB patients, but were found to decrease significantly after anti-TB treatment. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Toxicity of inhaled 144Ce fused clay particles in beagle dogs. VII

International Nuclear Information System (INIS)

Hahn, F.F.; Boecker, B.B.; Hobbs, C.H.; Jones, R.K.; Mauderly, J.L.; McClellan, R.O.; Pickrell, J.A.

1974-01-01

The metabolism, dosimetry, and effects of inhaled 144 Ce in fused clay particles are being investigated in the Beagle dog to aid in assessing the biological consequences of release of 144 Ce in a relatively insoluble form such as might occur in certain types of nuclear accidents. The toxicity of inhaled 144 Ce fused clay is also of general interest since it is representative of intermediate-lived beta-emitting radionuclides. Two major studies with young adult dogs (12 to 14 months of age at exposure) are involved: (1) a metabolism and dosimetry study in which 24 dogs were serially sacrificed over an extended period of time, and (2) a longevity study with 2 series of dogs; Series I with 15 dogs exposed to aerosols of 144 Ce in fused clay particles to yield initial lung burdens of 11 to 210 μCi/kg body weight and 3 control dogs exposed to nonradioactive fused clay particles and Series II with 96 dogs exposed to aerosols of 144 Ce in fused clay particles to yield initial lung burdens of 0.0024 to 66 μCi/kg body weight and 12 control dogs exposed to nonradioactive fused clay particles. Twenty-eight dogs died or were euthanized at 143 to 2396 days after inhalation of 144 Ce. The prominent findings were radiation pneumonitis in 17 dogs that died or were euthanized at early time periods and neoplastic disease in 10 of the 11 dogs that died or were euthanized at 750 days or later; 5 with hemangiosarcoma of the lung, 1 with both a hemangiosarcoma and a fibrosarcoma of the lung, 1 with both a bronchiolo-alveolar carcinoma and a hemangiosarcoma of lung, 1 with a hemangiosarcoma of lung, bronchiolo-alveolar carcinoma, and a bronchiogenic adenocarcinoma, and 1 each with a hemangiosarcoma of the mediastinum and of the spleen. The cumulative radiation dose to the lung at time of death has ranged from 22,000 to 140,000 rads. Serial observations are continuing on the 83 survivors and 15 controls. (U.S.)

40 CFR 144.66 - State assumption of responsibility.

Science.gov (United States)

2010-07-01

... PROGRAMS (CONTINUED) UNDERGROUND INJECTION CONTROL PROGRAM Financial Responsibility: Class I Hazardous Waste Injection Wells § 144.66 State assumption of responsibility. (a) If a State either assumes legal... 40 Protection of Environment 22 2010-07-01 2010-07-01 false State assumption of responsibility...

Strain-dependent electrical resistance of multi-walled carbon nanotube/polymer composite films

International Nuclear Information System (INIS)

Park, Myounggu; Kim, Hyonny; Youngblood, Jeffrey P

2008-01-01

The strain-dependent electrical resistance characteristics of multi-walled carbon nanotube (MWCNT)/polymer composite films were investigated. In this research, polyethylene oxide (PEO) is used as the polymer matrix. Two representative volume fractions of MWCNT/PEO composite films were selected: 0.56 vol% (near the percolation threshold) and 1.44 vol% (away from the percolation threshold) of MWCNT. An experimental setup which can measure electrical resistance and strain simultaneously and continuously has been developed. Unique and repeatable relationships in resistance versus strain were obtained for multiple specimens with different volume fractions of MWCNT. The overall pattern of electrical resistance change versus strain for the specimens tested consists of linear and nonlinear regions. A resistance change model to describe the combination of linear and nonlinear modes of electrical resistance change as a function of strain is suggested. The unique characteristics in electrical resistance change for different volume fractions imply that MWCNT/PEO composite films can be used as tunable strain sensors and for application into embedded sensor systems in structures

49 CFR 572.144 - Thorax assembly and test procedure.

Science.gov (United States)

2010-10-01

...-year-Old Child Crash Test Dummy, Alpha Version § 572.144 Thorax assembly and test procedure. (a) Thorax... displacement (compression) relative to the spine, measured with the chest deflection transducer (SA-572-S50...

100-nm thick single-phase wurtzite BAlN films with boron contents over 10%

KAUST Repository

Li, Xiaohang; Wang, Shuo; Liu, Hanxiao; Ponce, Fernando A.; Detchprohm, Theeradetch; Dupuis, Russell D.

2017-01-01

Growing thicker BAlN films while maintaining single-phase wurtzite structure and boron content over 10% has been challenging. In this study, we report on the growth of 100 nm-thick single-phase wurtzite BAlN films with boron contents up to 14.4% by MOCVD. Flow-modulated epitaxy was employed to increase diffusion length of group-III atoms and reduce parasitic reactions between the metalorganics and NH3. A large growth efficiency of ∼2000 μm mol−1 was achieved as a result. Small B/III ratios up to 17% in conjunction with high temperatures up to 1010 °C were utilized to prevent formation of the cubic phase and maintain wurtzite structure.

100-nm thick single-phase wurtzite BAlN films with boron contents over 10%

KAUST Repository

Li, Xiaohang

2017-01-11

Growing thicker BAlN films while maintaining single-phase wurtzite structure and boron content over 10% has been challenging. In this study, we report on the growth of 100 nm-thick single-phase wurtzite BAlN films with boron contents up to 14.4% by MOCVD. Flow-modulated epitaxy was employed to increase diffusion length of group-III atoms and reduce parasitic reactions between the metalorganics and NH3. A large growth efficiency of ∼2000 μm mol−1 was achieved as a result. Small B/III ratios up to 17% in conjunction with high temperatures up to 1010 °C were utilized to prevent formation of the cubic phase and maintain wurtzite structure.

Toxicity of 144Ce inhaled in a relatively insoluble form by Beagle dogs. XI

International Nuclear Information System (INIS)

Hahn, F.F.; Hanika-Rebar, C.; Boecker, B.B.; Mauderly, J.L.; McClellan, R.O.; Pickrell, J.A.

1978-01-01

The metabolism, dosimetry and effects of 144 Ce inhaled in fused aluminosilicate particles are being investigated in the Beagle dog to assess the biological consequences of release of 144 Ce in a relatively insoluble form such as might occur in certain types of nuclear accidents. The toxicity of inhaled 144 Ce is also of general interest since it is representative of intermediate-lived beta-emitting radionuclides. Two major studies with young adult dogs (12 to 14 months of age at exposure) are involved: (1) a metabolism and dosimetry study in which 24 dogs were serially sacrificed over an extended period of time, and (2) a longevity study with two series of dogs. Series I contains 15 dogs exposed to aerosols of 144 Ce in fused aluminosilicate particles to yield initial lung burdens of 11 to 210 μCi/kg body weight and three control dogs exposed to nonradioactive fused aluminosilicate particles. Series II contains 96 dogs exposed to aerosols of 144 Ce in fused aluminosilicate particles to yield initial lung burdens of 0.0024 to 66 μCi/kg body weight and 12 control dogs exposed to nonradioactive, fused aluminosilicate particles. To date, 51 dogs have died or were euthanized at 143 to 3280 days after inhalation of 144 Ce. The prominent findings were radiation pneumonitis in 17 dogs that died or were euthanized at 750 days or later. The cumulative radiation dose to the lung at time of death has ranged from 550 to 140,000 rads. Serial observations are continuing on the 60 survivors and 15 controls

Toxicity of 144Ce inhaled in a relatively insoluble form by immature Beagle dogs. XIII

International Nuclear Information System (INIS)

Boecker, B.B.; Muggenburg, B.A.; Hahn, F.F.; Mauderly, J.L.; McClellan, R.O.

1984-01-01

Immature Beagle dogs (3 months old) were exposed once by inhalation to an aerosol of 144 Ce incorporated in fused aluminosilicate particles. The influence of this age on the dose-response relationships is being compared to that of 13-month-old and 8 to 10.5-year-old dogs. This study involves 49 dogs that received graded initial lung burdens from 0.004 to 140 μCi 144 Ce/kg (0.15 to 5200 kBq/kg) body weight and five control dogs. To date, 23 of the 144 Ce-exposed dogs and three of the controls have died. Dogs with the highest initial lung burdens of 144 Ce died during the first 4 months with radiation pneumonitis, pulmonary fibrosis, and congestive heart failure. Pulmonary hemangiosarcoma was the primary finding in dogs that died at 1.5 to 2 years after exposure. Deaths beyond that time have been due primarily to extrapulmonary hemangiosarcomas. Observations are continuing on the surviving 26 144 Ce-exposed and two control dogs at 8.0 to 12.2 years after exposure. 2 figures, 1 table

Toxicity of 144Ce inhaled in a relatively insoluble form by immature Beagle dogs. XII

International Nuclear Information System (INIS)

Boecker, B.B.; Muggenburg, B.A.; Hahn, F.F.; Mauderly, J.L.; McClellan, R.O.

1983-01-01

Immature Beagle dogs (3 months old) were exposed once by inhalation to an aerosol of 144 Ce incorporated in fused aluminosilicate particles. The influence of this age on the dose-response relationships is being compared to that of 13-mo-old and 8 to 10.5-yr-old dogs. This study involves 49 dogs that received graded initial lung burdens from 0.004 to 140 μCi 144 Ce/kg body weight and five control dogs. To date, 19 of the 144 Ce-exposed dogs and one of the controls have died. Dogs with the highest initial lung burdens of 144 Ce died during the first 4 months with radiation pneumonitis, pulmonary fibrosis, and congestive heart failure. Pulmonary hemangiosarcoma was the primary finding in dogs that died at 1.5 to 2 years after exposure. Deaths beyond that time have been due primarily to extrapulmonary hemangiosarcomas. Observations are continued on the surviving 30 144 Ce-exposed and four control dogs at 7.0 to 11.2 years after exposure

Toxicity of 144Ce inhaled in a relatively insoluble form by aged Beagle dogs. XII

International Nuclear Information System (INIS)

Boecker, B.B.; Hahn, F.F.; Muggenburg, B.A.; Mauderly, J.L.; McClellan, R.O.; Pickrell, J.A.

1983-01-01

The toxicity of relatively insoluble 144 Ce inhaled by 8- to 10.5-year-old Beagle dogs is being investigated to determine possible age-related differences in long-term biological responses. Forty-two dogs were exposed to aerosols of 144 Ce in fused aluminosilicate particles to yield initial lung burdens of 2.2 to 75 μCi 144 Ce/kg body weight, and 12 control dogs were exposed to non-radioactive fused aluminosilicate particles. All 144 Ce-exposed and control dogs have died or were euthanized between 197 and 2726 days after the inhalation exposure. Prominent findings in the 144 Ce-exposed dogs were radiation pneumonitis in 19 of the 23 dogs that died during the first 943 days after exposure, and neoplastic disease in 13 of the 20 dogs that died beyond 904 days after exposure. Pulmonary tumors were found in five of these dogs. In contrast to the study with young adult dogs, in which pulmonary hemangiosarcomas were one of the prominent findings, all of these tumors were carcinomas

Toxicity of 144Ce inhaled in a relatively insoluble form by aged Beagle dogs. XIII

International Nuclear Information System (INIS)

Boecker, B.B.; Hahn, F.F.; Muggenburg, B.A.; Mauderly, J.L.; McClellan, R.O.; Pickrell, J.A.

1984-01-01

Toxicity of relatively insoluble 144 Ce inhaled by 8 to 10.5 year-old Beagle dogs is being investigated to determine possible age-related differences in long-term biological responses. Forty-two dogs were exposed to aerosols of 144 Ce in fused aluminosilicate particles to yield initial lung burdens of 2.2 to 75 μCi 144 Ce/kg (81-2800 kBq/kg) body weight, and 12 control dogs were exposed to non-radioactive fused aluminosilicate particles. All 144 Ce-exposed and control dogs have died or were euthanized between 197 and 2726 days after the inhalation exposure. Prominent findings in the 144 Ce-exposed dogs were radiation pneumonitis in 19 of the 23 dogs that died during the first 943 days after exposure, and neoplastic disease in 13 of the 20 dogs that died beyond 904 days after exposure. Pulmonary tumors were found in five of these dogs. In contrast to the study with young adult dogs, in which pulmonary hemangiosarcomas were one of the prominent findings, all of these tumors were carcinomas. 1 figure, 1 table

Toxicity of 144Ce inhaled in a relatively insoluble form by immature Beagle dogs. XVII

International Nuclear Information System (INIS)

Boeker, B.B.; Muggenburg, B.A.; Hahn, F.F.; Mauderly, J.L.; McClellan, R.O.

1988-01-01

Immature Beagle dogs (3-mo old) received a single, brief inhalation exposure to 144 Ce in fused aluminosilicate particles as part of a series of studies designed to study the effects of age on dose response relationships for inhaled radionuclides. Forty-nine dogs inhaled graded levels of 144 Ce that resulted in initial lung burdens ranging from 0.004-140 μCi/kg 0.15-5200 kBq/kg) body weight. Five control dogs inhaled nonradioactive fused aluminosilicate particles. Forty-one of the 144 Ce-exposed dogs have died: 11 with lung tumors 4 with tumors of the tracheobronchial lymph nodes, with a nasal cavity tumor, and 9 with non neoplastic diseases of the respiratory tract. Observations are continuing on the 8 144 Ce-exposed dogs that are surviving at this time. (author)

MiR-144 Increases Intestinal Permeability in IBS-D Rats by Targeting OCLN and ZO1

Directory of Open Access Journals (Sweden)

Qiuke Hou

2017-12-01

Full Text Available Background/Aims: Irritable bowel syndrome with diarrhoea (IBS-D is a chronic, functional bowel disorder characterized by abdominal pain or diarrhoea and altered bowel habits, which correlate with intestinal hyperpermeability. MicroRNAs (miRNAs are involved in regulating intestinal permeability in IBS-D. However, the role of miRNAs in regulating intestinal permeability and protecting the epithelial barrier remains unclear. Our goals were to (i identify differential expression of miRNAs and their targets in the distal colon of IBS-D rats; (ii verify in vitro whether occludin (OCLN and zonula occludens 1 (ZO1/TJP1 were direct targets of miR-144 and were down-regulated in IBS-D rats; and (iii determine whether down-regulation of miR-144 in vitro could reverse the pathological hallmarks of intestinal hyperpermeability via targeting OCLN and ZO1. Methods: The IBS-D rat model was established using 4% acetic acid and evaluated by haematoxylin-eosin (HE staining. The distal colon was obtained in order to perform miRNA microarray analysis and to isolate and culture colonic epithelial cells. When differential expression of miRNA was found, the results were verified by qRT-PCR, and the target genes were further explored by bioinformatics analysis. Correlation analyses were carried out to compare the expression of miRNA and target genes. Then, mutants, miRNA mimics and inhibitors of the target genes were constructed and transfected to colonic epithelial cells. qRT-PCR, western blotting, enzyme-linked immunosorbent assays (ELISAs and dual-luciferase assays were used to investigate the expression of miR-144 and OCLN, ZO1 in IBS-D rats. Results: There were 8 up-regulated and 18 down-regulated miRNAs identified in the IBS-D rat model. Of these, miR-144 was markedly up-regulated and resulted in the down-regulation of OCLN and ZO1 expression. Overexpression of miR-144 by transfection of miR-144 precursor markedly inhibited the expression of OCLN and ZO1. Further

Macrophage activation and histopathological findings in Calomys callosus and Swiss mice infected with several strains of Trypanosoma cruzi

Directory of Open Access Journals (Sweden)

Monamaris Marques Borges

1992-12-01

Full Text Available Peritoneal macrophage activation as measured by H2O2 release and histopathology was compared between Swiss mice and Calomys callosus, a wild rodent, reservoir of Trypanosoma cruzi, during the course of infection with four strains of this parasite. In mice F and Y strain infections result in high parasitemia and mortality while with silvatic strains Costalimai and M226 parasitemia is sub-patent, with very low mortality. H2O2 release peaked at 33,6 and 59 nM/2 x 10(elevado a sexta potência cells for strains Y and F, respectively, 48 and 50 nM/2 x 10 (elevado a sexta potência for strains Costalimai and M226, at different days after infection. Histopathological findings of myositis, myocarditis, necrotizing artheritis and abscence of macrophage parasitism were foud for strains F and Costalimai. Y strain infection presented moderate myocarditis and myositis, with parasites multiplying within macrophages. In C. callosus all four strains resulted in patent parasitemia wich was eventually overcome, with scarce mortality. H2O2 release for strains Y or F was comparable to that of mice-peaks of 27 and 53 nM/2 x 10 (elevado a sexta potência cells, with lower values for strains Costalimai and M226 - 16.5 and 4.6 nM/2 x 10(elevado a sexta potênciacells, respectively. Histopathological lesions with Y and F strain injected animals were comparable to those of mice at the onset of infections; they subsided completely at the later stages with Y strain and partially with F strain infected C. callosus. In Costalimai infected C. callosus practically no histopathological alterations were observed.

Strain and strain-release engineering at epitaxial SiGe islands on Si(0 0 1) for microelectronic applications

International Nuclear Information System (INIS)

Vastola, G.; Marzegalli, A.; Montalenti, F.; Miglio, Leo

2009-01-01

We report original finite element method simulations of the strain components at nanometric GeSi island on Si(0 0 1), for realistic shape, sizes and average composition, discussing the main mechanisms acting in the misfit strain relaxation. The tensile strain induced in a 30 nm Si capping layer and the one upon removing the island, after fixing the top part of the Si layer, is discussed in view of application as a field effect transistor channel, with high career mobility induced by the lattice deformation. The large shear components obtained for steeper island morphologies are predicted to be particularly performing, especially in comparison to one another strained-silicon configuration (totally top-down originated), recently developed by IBM corporation.

Strain Dependence of Photoluminescense of Individual Carbon Nanotubes

Science.gov (United States)

Nikolaev, Pavel N.; Leeuw, Tonya K.; Tsyboulski, Dmitri A.; Bachilo, Sergei M.; Weisman, Bruce; Arepalli, Sivaram

2007-01-01

We have investigated strain dependence of photoluminescense (PL) spectra of single wall carbon nanotubes (SWNT). Nanotubes were sparsely dispersed in a thin PMMA film applied to acrylic bar, and strained in both compression and extension by bending this bar in either direction in a homebuilt four-point bending rig. The average surface strain was measured with high accuracy by a resistive strain gage applied on top of the film. The near infrared imaging and spectroscopy were performed on the inverted microscope equipped with high numerical aperture reflective objective lens and InGaAs CCD cameras. PL was excited with a diode laser at either 658, 730 or 785 nm, linearly polarized in the direction of the strain. We were able to measure (n,m) types and orientation of individual nanotubes with respect to strain direction and strain dependence of their PL maxima. It was found that PL peak shifts with respect to the values measured in SDS micelles are a sum of three components. First, a small environmental shift due to difference in the dielectric constant of the surrounding media, that is constant and independent of the nanotube type. Second, shift due to isotropic compression of the film during drying. Third, shifts produced by the uniaxial loading of the film in the experiment. Second and third shifts follow expression based on the first-order expansion of the TB hamiltonian. Their magnitude is proportional to the nanotube chiral angle and strain, and direction is determined by the nanotube quantum number. PL strain dependence measured for a number of various nanotube types allows to estimate TB carbon-carbon transfer integral.

Lung lavage therapy to lessen the biological effects of inhaled 144Ce in dogs

International Nuclear Information System (INIS)

Muggenburg, B.A.; Boecker, B.B.; Hahn, F.F.; McClellan, R.O.

1990-01-01

To evaluate the therapeutic effects of removal of an internally deposited radionuclide on long-term biological effects, lung lavage was used to treat dogs that had inhaled 144Ce in a relatively insoluble form, in fused aluminosilicate particles. Either 10 lung lavages were performed between Days 2 and 56 after exposure or 20 lung lavages were performed between Days 2 and 84 after exposure. Approximately one-half of the 144Ce was removed by the lavages, resulting in a corresponding reduction in the total absorbed beta dose to lung. The mean survival time of the treated dogs was 1270 days compared to 370 days for untreated dogs whose initial pulmonary burdens of 144Ce were similar. Treated dogs died late from cancers of the lung or liver, whereas the untreated dogs died at much earlier times from radiation pneumonitis. Dogs treated with lung lavage but not exposed to 144Ce had a mean survival of 4770 days. We concluded that removal of 144Ce from the lung by lavage resulted in increased survival time and in a change in the biological effects from inhaled 144Ce from early-occurring inflammatory disease to late-occurring effects, principally cancer. In addition, the biological effects occurring in the treated dogs could be better predicted from the total absorbed beta dose in the lung and the dose rate after treatment rather than from the original dose rate to the lung. Therefore, we concluded that prompt treatment to remove radioactive materials could be of significant benefit to persons accidentally exposed to high levels of airborne, relatively insoluble, radioactive particles

Toxicity of 144Ce fused clay particles inhaled by immature beagle dogs. III

International Nuclear Information System (INIS)

Boecker, B.B.; McClellan, R.O.; Hahn, F.F.; Hobbs, C.H.; Mauderly, J.L.

1974-01-01

The metabolism, dosimetry, and biological effects of 144 Ce fused clay particles inhaled by immature Beagle dogs (approximately 3 months of age at exposure) are being investigated for comparison with studies of dogs exposed at 12 to 14 months of age and 8 to 10.5 years of age. These studies will assess possible age-related differences in the biological behavior and effects of inhaled radionuclides, differences that may be of significance in predicting the response of accidentally-exposed human populations that include individuals of different ages. Eighteen immature dogs have been entered into a radiation dose pattern study to be serially sacrificed at different intervals after inhalation exposure. During the first 2 months post-exposure, lung clearance and uptake by the tracheobronchial lymph nodes appeared to be greater in the immature dogs than in young adult dogs. Also, skeletal uptake was greater than hepatic uptake in the immature dogs. Three blocks of longevity animals, 10 per block, with graded initial lung burdens ranging from 0.004 to 120 μCi 144 Ce/kg body weight and 1 control, are currently on experiment. Three dogs with initial lung burdens of 73 to 120 μCi 144 Ce/kg body weight died at 66 to 121 days after exposure with pulmonary injury and congestive heart failure. Another dog with an initial lung burden of 70 μCi 144 Ce/kg body weight died at 511 days after exposure with pulmonary injury. Serial observations are continuing on the surviving 26 144 Ce-exposed and 3 control dogs. (U.S.)

UV-Photoreflectance and Raman Characterization of Strain Relaxation in Si on Silicon-Germanium Films

International Nuclear Information System (INIS)

Current, Michael; Chism, Will; Yoo, Woo Sik; Vartanian, Victor

2011-01-01

Photoreflectance (PR), using a uv (374 nm) diode laser probe beam, and Raman spectroscopy, using a multi-wavelength Ar + laser coupled to a high-resolution multi-wavelength spectrometer, were used to characterize the strain relaxation of Si top layers grown on a graded and relaxed SiGe buffer stack with a final Ge concentration of 20%. The Si top layer thicknesses ranged from 1.6 to 18 nm. Considerable radial variation in the strain relaxation was seen in all sampled wafers, highlighting the need for rapid, local strain characterization. Strong correlation between shift in the Si layer dielectric response, measured by uv-PR, and the Si top layer strain, measured by Raman, is reported.

Creating periodic local strain in monolayer graphene with nanopillars patterned by self-assembled block copolymer

Energy Technology Data Exchange (ETDEWEB)

Mi, Hongyi; Mikael, Solomon; Seo, Jung-Hun; Gui, Gui; Ma, Alice L.; Ma, Zhenqiang, E-mail: nealey@uchicago.edu, E-mail: mazq@engr.wisc.edu [Department of Electrical and Computer Engineering, University of Wisconsin–Madison, Madison, Wisconsin 53706 (United States); Liu, Chi-Chun; Nealey, Paul F., E-mail: nealey@uchicago.edu, E-mail: mazq@engr.wisc.edu [Department of Chemical and Biological Engineering, University of Wisconsin–Madison, Madison, Wisconsin 53706 (United States)

2015-10-05

A simple and viable method was developed to produce biaxial strain in monolayer graphene on an array of SiO{sub 2} nanopillars. The array of SiO{sub 2} nanopillars (1 cm{sup 2} in area, 80 nm in height, and 40 nm in pitch) was fabricated by employing self-assembled block copolymer through simple dry etching and deposition processes. According to high resolution micro-Raman spectroscopy and atomic force microscopy analyses, 0.9% of maximum biaxial tensile strain and 0.17% of averaged biaxial tensile strain in graphene were created. This technique provides a simple and viable method to form biaxial tensile strain in graphene and offers a practical platform for future studies in graphene strain engineering.

MicroRNA-144-3p suppresses gastric cancer progression by inhibiting epithelial-to-mesenchymal transition through targeting PBX3

International Nuclear Information System (INIS)

Li, Butian; Zhang, Shengping; Shen, Hao; Li, Chenglong

2017-01-01

MicroRNAs are aberrantly expressed in a wide variety of human cancers. The present study aims to elucidate the effects and molecular mechanisms of miR-144-3p that underlie gastric cancer (GC) development. It was observed that miR-144-3p expression was significantly decreased in GC tissues compared to that in paired non-tumor tissues; moreover, its expression was lower in tissues of advanced stage and larger tumor size, as well as in lymph node metastasis tissues compared to that in control groups. miR-144-3p expression was associated with depth of invasion (P = 0.030), tumor size (P = 0.047), lymph node metastasis (P = 0.047), and TNM stage (P = 0.048). Additionally, miR-144-3p significantly inhibited proliferation, migration, and invasion in GC cells. It also reduced F-actin expression and suppressed epithelial-to-mesenchymal transition (EMT) in GC cells. Furthermore, pre-leukemia transcription factor 3 (PBX3) was a direct target gene of miR-144-3p. PBX3 was overexpressed in GC tissues and promoted EMT in GC cells. The effects of miR-144-3p mimics or inhibitors on cell migration, invasion, and proliferation were reversed by PBX3 overexpression or downregulation respectively. These results suggest that miR-144-3p suppresses GC progression by inhibiting EMT through targeting PBX3. - Highlights: • miR-144-3p is downregulated in gastric cancer tissues and associated with malignant clinical factors. • miR-144-3p inhibits proliferation, migration, and invasion in gastric cancer cells. • PBX3 is a direct target of miR-144-3p and promotes EMT in gastric cancer. • miR-144-3p suppresses EMT in gastric cancer by regulating PBX3.

Toxicity of 144Ce inhaled in a relatively insoluble form by aged Beagle dogs. VII

International Nuclear Information System (INIS)

Hahn, F.F.; Hanika-Rebar, C.; Boecker, B.B.; McClellan, R.O.; Pickrell, J.A.

1978-01-01

The toxicity of 144 Ce inhaled in fused aluminosilicate particles by 8- 10.5-year-old dogs is being investigated to provide information on age-related differences in the response of older members of the human population to accidental inhalation of radioactive aerosols. These data on aged dogs will be compared to the results of similar studies of dogs exposed at approximately 3 months or 12 to 14 months of age. Six blocks of five female dogs each have been divided into four exposure levels with mean initial lung burdens of 7.2, 14, 28, and 57 μCi 144 Ce/kg body weight. Six blocks of four male dogs each have been divided into three exposure levels with mean initial lung burdens of 7.2, 14, and 28 μCi 144 Ce/kg body weight. Controls in each block were exposed to fused aluminosilicate particles containing stable cerium. Nineteen dogs with initial lung burdens ranging from 14 to 75 μCi 144 Ce/kg body weight and cumulative doses to lung of from 20,000 to 74,000 rads have died or were euthanized 197 to 1849 days after exposure with clinicopathologic findings of radiation pneumonitis and pulmonary fibrosis. Eight control dogs have died. Pulmonary retention of the inhaled 144 Ce was similar to that observed previously in dogs exposed at 18 to 22 months of age in a radiation dose pattern study. Serial observations are continuing on the nine surviving 144 Ce-exposed and four control dogs

Toxicity of 144Ce inhaled in a relatively insoluble form by aged Beagle dogs. VIII

International Nuclear Information System (INIS)

Hahn, F.F.; Muggenburg, B.A.; Boecker, B.B.; Mauderly, J.L.; McClellan, R.O.; Pickrell, J.A.

1979-01-01

The toxicity of relatively insoluble 144 Ce inhaled by 8- to 10.5-year-old dogs is being investigated to provide information on age-related differences in the response of dogs to lung burdens of this fission product. These data on aged dogs will be compared to the results of similar studies of dogs exposed at approximately 3 months or 12 to 14 months of age. Forty-two dogs were exposed, nose only, to aerosols of 144 Ce in fused aluminosilicate particles to yield initial lung burdens of 2.2 to 75 μCi/kg body weight and 12 control dogs were exposed to nonradioactive fused aluminosilicate particles. To date, 37 dogs have died or were euthanized 197 to 2375 days after inhalation of 144 Ce. The prominent findings were radiation pneumonitis in 19 dogs that died at early times with cumulative doses to lung of 20 000 to 74 000 rads and neoplastic disease in six of 14 dogs that died 943 days after exposure or later. Pulmonary tumors were found in four of these dogs. However, only one of these tumors killed the dog. No hemangiosarcomas have been observed in this study. This result is in contrast to the results with immature or young adult dogs exposed to 144 Ce. The difference may be a dose-related phenomenon since dogs which developed hemangiosarconomas had greater initial lung burdens of 144 Ce. Aged dogs with similar burdens died at earlier times with radiation pneumonitis. Observations are continuing on the five surviving 144 Ce-exposed and four control dogs

Toxicity of 144Ce inhaled in a relatively insoluble form by immature Beagle dogs. VIII

International Nuclear Information System (INIS)

Boecker, B.B.; Merickel, B.S.; Hahn, F.F.; Mauderly, J.L.; McClellan, R.O.

1979-01-01

The influence of age at exposure on the resulting patterns of deposition, retention, dosimetry and biological effects from a single inhalation exposure to a relatively insoluble form of a beta-emitting radionuclide with a relatively long physical half-life is being investigated. Immature Beagle dogs (3 months of age) have been exposed once, by inhalation, to an aerosol of 144 Ce incorporated in fused aluminosilicate particles. Eighteen of these dogs were serially sacrificed to study the patterns of deposition, retention and dosimetry and the remaining 49 dogs received graded initial lung burdens that ranged from 0.004 to 140 μCi 144 Ce/kg body weight and are being observed over their life span for study of the resulting long-term biological effects. Five control dogs are also included in this study. To date, 13 of the 144 Ce-exposed dogs in the longevity study and none of the controls have died. Dogs with the highest initial lung burdens of 144 Ce died first (during the first 4 months) with radiation pneumonitis, pulmonary fibrosis and congestive heart failure. Pulmonary hemangiosarcoma was the primary finding in dogs that died at 1.5 to 2 years after exposure. Deaths beyond that time have primarily involved extrapulmonary hemangiosarcomas. One dog, 627B, with an initial lung burden of 24 μCi 144 Ce/kg body weight died during the past year at 2341 days after exposure with a widely disseminated hemangiosarcoma showing heavy involvement of the liver and skin. Observations are continuing on the surviving 36 144 Ce-exposed and five control dogs

New long-wavelength Nd:YAG laser at 1.44 micron: effect on brain.

Science.gov (United States)

Martiniuk, R; Bauer, J A; McKean, J D; Tulip, J; Mielke, B W

1989-02-01

A wavelength-shifted Nd:YAG laser, tuned to coincide with the infrared absorption peak of water at 1.44 microns, was used to make lesions in normal rabbit brain. A total of 48 lesions were made with power up to 20 W, with energy up to 40 joules, and with two different spot sizes. These lesions were compared to lesions made with 1.06 microns radiation from an Nd:YAG laser under identical operating conditions. Measurements of blood-brain barrier damage and width, depth, and volume of tissue affected were obtained 30 minutes after placement of the lesions. It was found that 1.44-microns lesions produced photoevaporative tissue loss at the highest intensities used. The layer of coagulated tissue remaining after photovaporization had a mean thickness of 0.6 mm irrespective of the volume of tissue removed. There was no photovaporization in the 1.06-microns lesions. In addition, the amount of peripheral edema per unit volume of tissue coagulated was approximately half at the 1.44-microns wavelength. These findings suggest that the 1.44-microns Nd:YAG laser may be a useful surgical instrument since it combines the photoevaporative effect of the CO2 laser while maintaining the advantages of the conventional Nd:YAG laser (quartz fiber delivery and effective hemostasis).

Reduction of molybdate to molybdenum blue by Klebsiella sp. strain hkeem.

Science.gov (United States)

Lim, H K; Syed, M A; Shukor, M Y

2012-06-01

A novel molybdate-reducing bacterium, tentatively identified as Klebsiella sp. strain hkeem and based on partial 16s rDNA gene sequencing and phylogenetic analysis, has been isolated. Strain hkeem produced 3 times more molybdenum blue than Serratia sp. strain Dr.Y8; the most potent Mo-reducing bacterium isolated to date. Molybdate was optimally reduced to molybdenum blue using 4.5 mM phosphate, 80 mM molybdate and using 1% (w/v) fructose as a carbon source. Molybdate reduction was optimum at 30 °C and at pH 7.3. The molybdenum blue produced from cellular reduction exhibited absorption spectrum with a maximum peak at 865 nm and a shoulder at 700 nm. Inhibitors of electron transport system such as antimycin A, rotenone, sodium azide, and potassium cyanide did not inhibit the molybdenum-reducing enzyme. Mercury, silver, and copper at 1 ppm inhibited molybdenum blue formation in whole cells of strain hkeem. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

40 CFR 144.51 - Conditions applicable to all permits.

Science.gov (United States)

2010-07-01

... PROGRAMS (CONTINUED) UNDERGROUND INJECTION CONTROL PROGRAM Permit Conditions § 144.51 Conditions applicable... permit. Any permit noncompliance constitutes a violation of the Safe Drinking Water Act and is grounds... denial of a permit renewal application; except that the permittee need not comply with the provisions of...

Degradation of carbazole, dibenzothiophene, and dibenzofuran at low temperature by Pseudomonas sp. strain C3211.

Science.gov (United States)

Jensen, Anne-Mette; Finster, Kai Waldemar; Karlson, Ulrich

2003-04-01

Pseudomonas sp. strain C3211 was isolated from a temperate climate soil contaminated with creosote. This strain was able to degrade carbazole, dibenzothiophene and dibenzofuran at 10 degrees C with acetone as a co-substrate. When dibenzothiophene was degraded by strain C3211, an orange compound, which absorbed at 472 nm, accumulated in the medium. Degradation of dibenzofuran was followed by accumulation of a yellowish compound, absorbing at 462 nm. The temperature optimum of strain C3211 for degradation of dibenzothiophene and dibenzofuran was at 20 to 21 degrees C, while the maximum temperature for degradation was at 27 degrees C. Both compounds were degraded at 4 degrees C. Degradation at 10 degrees C was faster than degradation at 25 degrees C. This indicates that strain C3211 is adapted to life at low temperatures.

A complex multilevel attack on Pseudomonas aeruginosa algT/U expression and AlgT/U activity results in the loss of alginate production

DEFF Research Database (Denmark)

Sautter, Robert; Ramos, Damaris; Schneper, Lisa

2012-01-01

Infection by the opportunistic pathogen Pseudomonas aeruginosa is a leading cause of morbidity and mortality seen in cystic fibrosis (CF) patients. This is mainly due to the genotypic and phenotypic changes of the bacteria that cause conversion from a typical nonmucoid to a mucoid form in the CF...... lung. Mucoid conversion is indicative of overproduction of a capsule-like polysaccharide called alginate. The alginate-overproducing (Alg+) mucoid phenotype seen in the CF isolates is extremely unstable. Low oxygen tension growth of mucoid variants readily selects for nonmucoid variants. The switching...... complementation and sequencing of one Group B sap mutant, sap22, revealed that the nonmucoid phenotype was due to the presence of a mutation in PA3257. PA3257 encodes a putative periplasmic protease. Mutation of PA3257 resulted in decreased algT/U expression. Thus, inhibition of algT/U is a primary mechanism...

Re-emergence of H3N2 strains carrying potential neutralizing mutations at the N-linked glycosylation site at the hemagglutinin head, post the 2009 H1N1 pandemic.

Science.gov (United States)

Ushirogawa, Hiroshi; Naito, Tadasuke; Tokunaga, Hirotoshi; Tanaka, Toshihiro; Nakano, Takashi; Terada, Kihei; Ohuchi, Masanobu; Saito, Mineki

2016-08-08

Seasonally prevalent H1N1 and H3N2 influenza A viruses have evolved by antigenic drift; this evolution has resulted in the acquisition of asparagine (N)-linked glycosylation sites (NGSs) in the globular head of hemagglutinin (HA), thereby affecting the antigenic and receptor-binding properties, as well as virulence. An epidemiological survey indicated that although the traditional seasonal H1N1 strain had disappeared, H3N2 became predominant again in the seasons (2010-11 and 2011-12) immediately following the H1N1 pandemic of 2009. Interestingly, although the 2009 pandemic H1N1 strain (H1N1pdm09) lacks additional NGSs, clinically isolated H3N2 strains obtained during these seasons gained N (Asn) residues at positions 45 and 144 of HA that forms additional NGSs. To investigate whether these NGSs are associated with re-emergence of H3N2 within the subtype, we tested the effect of amino acid substitutions on neutralizing activity by using the antisera raised against H3N2 strains with or without additional NGSs. Furthermore, because the N residue at position 144 of HA was identified as the site of mismatch between the vaccine and epidemic strains of 2011-2012, we generated mutant viruses by reverse genetics and tested the functional importance of this particular NGS for antibody-mediated neutralization by intranasal inoculation of mice. The results indicated that amino acid substitution at residue 144 significantly affected neutralization activity, acting as an escape mutation. Our data suggest that the newly acquired NGSs in the HA globular head may play an important role in the re-emergence of endemic seasonal H3N2 strain by aiding the escape from humoral immunity.

Strain relaxation of germanium-tin (GeSn) fins

Science.gov (United States)

Kang, Yuye; Huang, Yi-Chiau; Lee, Kwang Hong; Bao, Shuyu; Wang, Wei; Lei, Dian; Masudy-Panah, Saeid; Dong, Yuan; Wu, Ying; Xu, Shengqiang; Tan, Chuan Seng; Gong, Xiao; Yeo, Yee-Chia

2018-02-01

Strain relaxation of biaxially strained Ge1-xSnx layer when it is patterned into Ge1-xSnx fin structures is studied. Ge1-xSnx-on-insulator (GeSnOI) substrate was realized using a direct wafer bonding (DWB) technique and Ge1-xSnx fin structures were formed by electron beam lithography (EBL) patterning and dry etching. The strain in the Ge1-xSnx fins having fin widths (WFin) ranging from 1 μm down to 80 nm was characterized using micro-Raman spectroscopy. Raman measurements show that the strain relaxation increases with decreasing WFin. Finite element (FE) simulation shows that the strain component in the transverse direction relaxes with decreasing WFin, while the strain component along the fin direction remains unchanged. For various Ge1-xSnx fin widths, transverse strain relaxation was further extracted using micro-Raman spectroscopy, which is consistent with the simulation results.

Toxicity of {sup 144}Ce inhaled in a relatively insoluble form by immature Beagle dogs. XVII

Energy Technology Data Exchange (ETDEWEB)

Boeker, B B; Muggenburg, B A; Hahn, F F; Mauderly, J L; McClellan, R O

1988-12-01

Immature Beagle dogs (3-mo old) received a single, brief inhalation exposure to {sup 144}Ce in fused aluminosilicate particles as part of a series of studies designed to study the effects of age on dose response relationships for inhaled radionuclides. Forty-nine dogs inhaled graded levels of {sup 144}Ce that resulted in initial lung burdens ranging from 0.004-140 {mu}Ci/kg 0.15-5200 kBq/kg) body weight. Five control dogs inhaled nonradioactive fused aluminosilicate particles. Forty-one of the {sup 144}Ce-exposed dogs have died: 11 with lung tumors 4 with tumors of the tracheobronchial lymph nodes, with a nasal cavity tumor, and 9 with non neoplastic diseases of the respiratory tract. Observations are continuing on the 8 {sup 144}Ce-exposed dogs that are surviving at this time. (author)

21 CFR 133.144 - Granular and stirred curd cheese.

Science.gov (United States)

2010-04-01

... 133.144 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... this section or by any other procedure which produces a finished cheese having the same physical and... hydrogen peroxide/catalase, and is subjected to the action of a lactic acid-producing bacterial culture...

Strain and thermal conductivity in ultrathin suspended silicon nanowires

Science.gov (United States)

Fan, Daniel; Sigg, Hans; Spolenak, Ralph; Ekinci, Yasin

2017-09-01

We report on the uniaxial strain and thermal conductivity of well-ordered, suspended silicon nanowire arrays between 10 to 20 nm width and 22 nm half-pitch, fabricated by extreme-ultraviolet (UV) interference lithography. Laser-power-dependent Raman spectroscopy showed that nanowires connected monolithically to the bulk had a consistent strain of ˜0.1 % , whereas nanowires clamped by metal exhibited variability and high strain of up to 2.3%, having implications in strain engineering of nanowires. The thermal conductivity at room temperature was measured to be ˜1 W /m K for smooth nanowires and ˜0.1 W /m K for rougher ones, similar to results by other investigators. We found no modification of the bulk properties in terms of intrinsic scattering, and therefore, the decrease in thermal conductivity is mainly due to boundary scattering. Different types of surface roughness, such as constrictions and line-edge roughness, may play roles in the scattering of phonons of different wavelengths. Such low thermal conductivities would allow for very efficient thermal energy harvesting, approaching and passing values achieved by state-of-the-art thermoelectric materials.

Heterogeneity of biofilms formed by nonmucoid Pseudomonas aeruginosa isolates from patients with cystic fibrosis

DEFF Research Database (Denmark)

Lee, Baoleri; Haagensen, Janus Anders Juul; Ciofu, O.

2005-01-01

lactone quorum-sensing molecules). Compared with wild-type strain PAO 1, most P. aeruginosa isolates demonstrated different degrees of reduction of adherence on polystyrene surfaces. The in vitro biofilm formation of isolates was investigated in a hydrodynamic flow system. Confocal laser scanning...... to phenotypic changes and in vitro biofilm formation. The physiological alterations were associated with a loss of motility (35% were nonmotile) and with decreased production of virulence factors (pyocyanin, proteases) and quorum-sensing molecules (45% of the isolates were unable to produce 3-O-C(12)-homoserine...

Polycrystalline Ba0.6Sr0.4TiO3 thin films on r-plane sapphire: Effect of film thickness on strain and dielectric properties

Science.gov (United States)

Fardin, E. A.; Holland, A. S.; Ghorbani, K.; Akdogan, E. K.; Simon, W. K.; Safari, A.; Wang, J. Y.

2006-10-01

Polycrystalline Ba0.6Sr0.4TiO3 (BST) films grown on r-plane sapphire exhibit strong variation of in-plane strain over the thickness range of 25-400nm. At a critical thickness of ˜200nm, the films are strain relieved; in thinner films, the strain is tensile, while compressive strain was observed in the 400nm film. Microwave properties of the films were measured from 1to20GHz by the interdigital capacitor method. A capacitance tunability of 64% was observed in the 200nm film, while thinner films showed improved Q factor. These results demonstrate the possibility of incorporating frequency agile BST-based devices into the silicon on sapphire process.

37 CFR 1.144 - Petition from requirement for restriction.

Science.gov (United States)

2010-07-01

... Inventions in One Application; Restriction § 1.144 Petition from requirement for restriction. After a final..., may petition the Director to review the requirement. Petition may be deferred until after final action on or allowance of claims to the invention elected, but must be filed not later than appeal. A...

Search for superdeformation in {sup 144,145}Gd

Energy Technology Data Exchange (ETDEWEB)

Rzaca-Urban, T [Warsaw Univ. (Poland); Lieder, R M; Strahle, K; Utzelmann, S; Gast, W; Kutchin, D; Schnare, H [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Kernphysik; Georgiev, A [Sofia Univ. (Bulgaria); Marti, G [Comision Nacional de Energia Atomica, Buenos Aires (Argentina). Dept. de Fisica; Spohr, K [Forschungszentrum Juelich GmbH (Germany). Inst. fuer Kernphysik; [Hahn-Meitner-Institut Berlin GmbH (Germany); Brentano, P; Eberth, J; Eschenauer, M; Freund, S; Ott, E; Theuerkauf, J; Wolters, H; Zell, K O [Koeln Univ. (Germany). Inst. fuer Kernphysik; Maier, K H; Grave, H; Bach, C; Heese, J; Kluge, H; Schramm, M; Schubarth, R [Hahn-Meitner-Institut Berlin GmbH (Germany)

1992-08-01

Two experiments were performed and analyzed to search for superdeformation band in {sup 144,145}Gd by bombarding {sup 108,110}Pd targets with {sup 40A}r ions with energies of 182 and 189 MeV respectively, at the VICKSI accelerator of the Hahn-Meitner Institut, Berlin. The gamma radiation was measured with the OSIRIS spectrometer. An extended level system was proposed. 8 refs., 2 figs.

Effect of large compressive strain on low field electrical transport in La0.88Sr0.12MnO3 thin films

International Nuclear Information System (INIS)

Prasad, Ravikant; Gaur, Anurag; Siwach, P K; Varma, G D; Kaur, A; Singh, H K

2007-01-01

We have investigated the effect of large in-plane compressive strain on the electrical transport in La 0.88 Sr 0.12 MnO 3 in thin films. For achieving large compressive strain, films have been deposited on single crystal LaAlO 3 (LAO, a = 3.798 A) substrate from a polycrystalline bulk target having average in-plane lattice parameter a av = (a b + b b )/2 = 3.925 A. The compressive strain was further relaxed by varying the film thickness in the range ∼6-75 nm. In the film having least thickness (∼6 nm) large increase (c = 3.929 A) in the out-of-plane lattice parameter is observed which gradually decreases towards the bulk value (c bulk = 3.87 A) for ∼75 nm thick film. This shows that the film having the least thickness is under large compressive strain, which partially relaxes with increasing film thickness. The T IM of the bulk target ∼145 K goes up to ∼235 K for the ∼6 nm thin film and even for partially strain relaxed ∼75 nm thick film T IM is as high as ∼200 K. This enhancement in T IM is explained in terms of suppression of Jahn-Teller distortion of the MnO 6 octahedra by the large in-plane compressive strain. We observe a large enhancement in the low field magnetoresistance (MR) just below T IM in the films having partial strain relaxation. Thick films of 6 and 20 nm have MR ∼14% at 3 kOe that almost doubles in 35 nm film to ∼27%. Similar enhancement is also obtained in the case of the temperature coefficient of resistivity. The near doubling of low field MR is explained in terms of delocalization of weakly localized carriers around T IM by small magnetic fields

[The influence of pulsed low-intensity laser radiation of the red (635 nm) and infrared (904 nm) spectra on the human mesenchymal stem cells in vitro].

Science.gov (United States)

Moskvin, S V; Kliuchnikov, D Iu; Antipov, E V; Volchkov, S E; Kiseleva, O N

2014-01-01

Mesenchymal stem cells (MSC) have for a long time been an object of investigation with a view to elucidating the prospects for their application in clinical medicine and cosmetology. One of the approaches to the non-specific regulation of the activity of these cells at the stage of preliminary in vitro combination is the treatment with low-intensity laser radiation (LILR). The objective of the present study was to evaluate the possibility of using pulsed LILR of the infrared and red spectra for this purpose. We used the 4th passage adhesive MSC cultures based at the umbilical tissue of a donor who gave the informed consent to participate in the study. The source of illumination was a Lazmik-VLOK laser therapeutic apparatus (RU No RZN 2014/1410 dated 06.02.2014) with the matrix laser infrared radiation heads (wavelength 904 nm, light pulse length 108 ns, frequency 1500 Hz). The apparatus was operated either in the multi-frequency Lazmik regime [Moskvin S.V., 2014] with mean power density 0.05 and 0.14 mW/cm2 and the red spectrum (wavelength 635 nm, light pulse length 144 ns, frequency 1500 Hz) or in the multi-frequency Lazmik regime [Moskvin S.V., 2014] with mean power density 0.03 and 0.12. The exposition was 5 min in both regimes. The study has demonstrated that neither the morphological structure nor the viability of mesenchymal stem cells changed under the influence of energy and time parameters used in experiments. The number of cells was shown to slightly increase in comparison with control. The most pronounced effect was documented after illumination with pulse infrared (904 nm) LILR in the multi-frequency Lazmik regime. The maximum effect was observed during a period between days 1 and 3 of cultivation.

A convergent-beam electron diffraction study of strain homogeneity in severely strained aluminum processed by equal-channel angular pressing

Energy Technology Data Exchange (ETDEWEB)

Alhajeri, Saleh N. [Materials Research Group, Faculty of Engineering and the Environment, University of Southampton, Southampton SO17 1BJ (United Kingdom); Department of Manufacturing Engineering, College of Technological Studies, PAAET, PO Box 42325, Shuwaikh 70654 (Kuwait); Fox, Alan G. [Materials Research Group, Faculty of Engineering and the Environment, University of Southampton, Southampton SO17 1BJ (United Kingdom); Mechanical Engineering Department, Asian University, 89 Moo 12, Highway 331, Banglamung, Chon Buri 20260 (Thailand); Langdon, Terence G., E-mail: langdon@usc.edu [Materials Research Group, Faculty of Engineering and the Environment, University of Southampton, Southampton SO17 1BJ (United Kingdom); Departments of Aerospace and Mechanical Engineering and Materials Science, University of Southern California, Los Angeles, CA 90089-1453 (United States)

2011-11-15

Aluminum of commercial purity was processed by equal-channel angular pressing (ECAP) through two, four and eight passes at room temperature. A series of [1 1 4] convergent-beam electron diffraction (CBED) zone axis patterns were obtained using an electron probe with a diameter of 20 nm. Observations were recorded both immediately adjacent to the grain boundaries and in the grain interiors. Symmetry breaking of the higher-order Laue zone (HOLZ) lines was observed adjacent to the boundaries after two and four passes but not in the grain interiors. Pattern simulation of the CBED patterns taken from the two- and four-pass samples adjacent to the boundaries revealed a homogeneous strain with compressive and shear components. The presence of these homogeneous strains demonstrates that the internal stresses associated with the deformation of aluminum at room temperature are localized in the close vicinity, to within {approx}20 nm, of the grain boundaries.

Effects of mechanical strain on optical properties of ZnO nanowire

Science.gov (United States)

Vazinishayan, Ali; Lambada, Dasaradha Rao; Yang, Shuming; Zhang, Guofeng; Cheng, Biyao; Woldu, Yonas Tesfaye; Shafique, Shareen; Wang, Yiming; Anastase, Ndahimana

2018-02-01

The main objective of this study is to investigate the influences of mechanical strain on optical properties of ZnO nanowire (NW) before and after embedding ZnS nanowire into the ZnO nanowire, respectively. For this work, commercial finite element modeling (FEM) software package ABAQUS and three-dimensional (3D) finite-difference time-domain (FDTD) methods were utilized to analyze the nonlinear mechanical behavior and optical properties of the sample, respectively. Likewise, in this structure a single focused Gaussian beam with wavelength of 633 nm was used as source. The dimensions of ZnO nanowire were defined to be 12280 nm in length and 103.2 nm in diameter with hexagonal cross-section. In order to investigate mechanical properties, three-point bending technique was adopted so that both ends of the model were clamped with mid-span under loading condition and then the physical deformation model was imported into FDTD solutions to study optical properties of ZnO nanowire under mechanical strain. Moreover, it was found that increase in the strain due to the external load induced changes in reflectance, transmittance and absorptance, respectively.

Effects of mechanical strain on optical properties of ZnO nanowire

Directory of Open Access Journals (Sweden)

Ali Vazinishayan

2018-02-01

Full Text Available The main objective of this study is to investigate the influences of mechanical strain on optical properties of ZnO nanowire (NW before and after embedding ZnS nanowire into the ZnO nanowire, respectively. For this work, commercial finite element modeling (FEM software package ABAQUS and three-dimensional (3D finite-difference time-domain (FDTD methods were utilized to analyze the nonlinear mechanical behavior and optical properties of the sample, respectively. Likewise, in this structure a single focused Gaussian beam with wavelength of 633 nm was used as source. The dimensions of ZnO nanowire were defined to be 12280 nm in length and 103.2 nm in diameter with hexagonal cross-section. In order to investigate mechanical properties, three-point bending technique was adopted so that both ends of the model were clamped with mid-span under loading condition and then the physical deformation model was imported into FDTD solutions to study optical properties of ZnO nanowire under mechanical strain. Moreover, it was found that increase in the strain due to the external load induced changes in reflectance, transmittance and absorptance, respectively.

47 CFR 25.144 - Licensing provisions for the 2.3 GHz satellite digital audio radio service.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 2 2010-10-01 2010-10-01 false Licensing provisions for the 2.3 GHz satellite digital audio radio service. 25.144 Section 25.144 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES SATELLITE COMMUNICATIONS Applications and Licenses Space Stations § 25...

Prevention of radiation pneumonitis from inhaled 144Ce by lung lavage in beagle dogs

International Nuclear Information System (INIS)

Muggenburg, B.A.; Mauderly, J.L.; Boecker, B.B.; Hahn, F.F.; McClellan, R.O.

1975-01-01

This study was performed to evaluate bronchopulmonary lavage and chelation therapy as a treatment method to prevent the development of radiation pneumonitis after inhalation of a radioactive aerosol. Twelve beagle dogs were exposed to an aerosol of cerium-144 in fused clay particles resulting in initial lung burdens from 47 to 64 μCi of 144 Ce per kg of body weight. Eight of the dogs were treated with a series of 10 bronchopulmonary lavages and 10 intravenous injections of calcium diethylenetriamine pentaacetate acid during the first 56 days after exposure to remove the deposited 144 Ce; the remaining 4 exposed dogs received no treatment. An additional 4 dogs were exposed to stable cerium and were given the course of treatment as an additional control group. Three of the 4 untreated dogs and 2 of the 8 treated dogs died 171 to 246 days after exposure with radiation pneumonitis or pulmonary fibrosis, or both. All but one of the remaining dogs were alive and apparently in good clinical health 550 days after exposure; the one dog had radiographic indications of pulmonary fibrosis by 365 days after exposure. The relative distribution of 144 Ce in the lungs and other major organs was similar in the treated and untreated dogs that died

Cytochrome P450-mediated metabolism of the synthetic cannabinoids UR-144 and XLR-11

DEFF Research Database (Denmark)

Nielsen, Line Marie; Holm, Niels Bjerre; Olsen, Lars

2016-01-01

In recent years, synthetic cannabinoids have emerged in the illicit drug market, in particular via the Internet, leading to abuse of these drugs. There is currently limited knowledge about the specific enzymes involved in the metabolism of these drugs. In this study, we investigated the cytochrome...... of UR-144 and XLR-11, while inhibition of the other CYP enzymes in HLM had only minor effects. Thus, CYP3A4 is the major contributor to the CYP mediated metabolism of UR-144 and XLR-11 with minor contributions from CYP1A2. Users of UR-144 and XLR-11 are thus subject to the influence of potential drug-drug...... interactions, if they are concomitantly medicated with CYP3A4 inducers (e.g. some antiepileptics) or inhibitors (e.g. some antifungal drugs). Copyright © 2015 John Wiley & Sons, Ltd....

Strain-induced grain growth of cryomilled nanocrystalline Al in trimodal composites during forging

International Nuclear Information System (INIS)

Yao, B.; Simkin, B.; Majumdar, B.; Smith, C.; Bergh, M. van den; Cho, K.; Sohn, Y.H.

2012-01-01

Highlights: ► Grain growth of cryomilled nanocrystalline aluminum during hot forging. ► Use of hollow cone dark field imaging technique in TEM for grain size measurement. ► Grain growth model of strain, strain rate and temperature for forging optimization. - Abstract: Grain growth of nanocrystalline aluminum ( nc Al) in trimodal Al metal-matrix-composites (MMCs) during hot forging was investigated. The nc Al phase formed through cryomilling of inert gas-atomized powders in liquid nitrogen has an average grain size down to 21 nm, exhibits excellent thermal stability. However, substantial grain growth of nc Al up to 63 nm was observed when the Al MMCs were thermo-mechanically processed even at relatively low temperatures. Grain growth of the cryomilled nc Al phase in trimodal Al MMCs after hot forging was documented with respect to temperature ranging from 175 °C to 287 °C, true strain ranging from 0.4 to 1.35 and strain rate ranging from 0.1 to 0.5 s −1 . Hollow cone dark field imaging technique was employed to provide statistically confident measurements of nc Al grain size that ranged from 21 to 63 nm. An increase in forging temperature and an increase in true strain were correlated with an increase in grain size of nc Al. Results were correlated to devise a phenomenological grain growth model for forging that takes strain, strain rate and temperature into consideration. Activation energy for the grain growth during thermo-mechanical hot-forging was determined to be 35 kJ/mol, approximately a quarter of activation energy for bulk diffusion of Al and a half of activation energy for static recrystallization.

Strain characterization of FinFETs using Raman spectroscopy

International Nuclear Information System (INIS)

Kaleli, B.; Hemert, T. van; Hueting, R.J.E.; Wolters, R.A.M.

2013-01-01

Metal induced strain in the channel region of silicon (Si) fin-field effect transistor (FinFET) devices has been characterized using Raman spectroscopy. The strain originates from the difference in thermal expansion coefficient of Si and titanium-nitride. The Raman map of the device region is used to determine strain in the channel after preparing the device with the focused ion beam milling. Using the Raman peak shift relative to that of relaxed Si, compressive strain values up to – 0.88% have been obtained for a 5 nm wide silicon fin. The strain is found to increase with reducing fin width though it scales less than previously reported results from holographic interferometry. In addition, finite-element method (FEM) simulations have been utilized to analyze the amount of strain generated after thermal processing. It is shown that obtained FEM simulated strain values are in good agreement with the calculated strain values obtained from Raman spectroscopy. - Highlights: ► Strain is characterized in nanoscale devices with Raman spectroscopy. ► There is a fin width dependence of the originated strain. ► Strain levels obtained from this technique is in correlation with device simulations

Critical thickness and strain relaxation in molecular beam epitaxy-grown SrTiO3 films

International Nuclear Information System (INIS)

Wang, Tianqi; Ganguly, Koustav; Marshall, Patrick; Xu, Peng; Jalan, Bharat

2013-01-01

We report on the study of the critical thickness and the strain relaxation in epitaxial SrTiO 3 film grown on (La 0.3 Sr 0.7 )(Al 0.65 Ta 0.35 )O 3 (001) (LSAT) substrate using the hybrid molecular beam epitaxy approach. No change in the film's lattice parameter (both the in-plane and the out-of-plane) was observed up to a film thickness of 180 nm, which is in sharp contrast to the theoretical critical thickness of ∼12 nm calculated using the equilibrium theory of strain relaxation. For film thicknesses greater than 180 nm, the out-of-plane lattice parameter was found to decrease hyperbolically in an excellent agreement with the relaxation via forming misfit dislocations. Possible mechanisms are discussed by which the elastic strain energy can be accommodated prior to forming misfit dislocations leading to such anomalously large critical thickness

Advanced CMOS device technologies for 45 nm node and below

Directory of Open Access Journals (Sweden)

A. Veloso, T. Hoffmann, A. Lauwers, H. Yu, S. Severi, E. Augendre, S. Kubicek, P. Verheyen, N. Collaert, P. Absil, M. Jurczak and S. Biesemans

2007-01-01

Full Text Available We review and discuss the latest developments and technology options for 45 nm node and below, with scaled planar bulk MOSFETs and MuGFETs as emerging devices. One of the main metal gate (MG candidates for scaled CMOS technologies are fully silicided (FUSI gates. In this work, by means of a selective and controlled poly etch-back integration process, dual work-function Ni-based FUSI/HfSiON CMOS circuits with record ring oscillator performance (high-VT are reported (17 ps at VDD=1.1 V and 20 pA/μm Ioff, meeting the ITRS 45 nm node requirement for low-power (LP CMOS. Compatibility of FUSI and other MG with known stress boosters like stressed CESL (contact-etch-stop-layer with high intrinsic stress or embedded SiGe in the pMOS S/D regions is validated. To obtain MuGFET devices that are competitive, as compared to conventional planar bulk devices, and that meet the stringent drive and leakage current requirements for the 32 nm node and beyond, higher channel mobilities are required. Results obtained by several strain engineering methods are presented here.

Dust Explosion Characteristics of Agglomerated 35 nm and 100 nm Aluminum Particles

Directory of Open Access Journals (Sweden)

Hong-Chun Wu

2010-01-01

Full Text Available In the experiment, nanoparticles of 35 nm Al and 100 nm Al powders, respectively, formed particles with average sizes of 161 nm and 167 nm in agglomeration. The characteristics of dust cloud explosions with the two powder sizes, 35 nm and 100 nm, revealed considerable differences, as shown here: (dp/dtmax-35 nm = 1254 bar/s, (dp/dtmax-100 nm = 1105 bar/s; Pmax-35 nm = 7.5 bar, Pmax-100 nm = 12.3 bar, and MEC-35 nm = 40 g/m3, MEC-100 nm = 50 g/m3. The reason of Pmax-35 nm value is smaller than Pmax-100 nm may be due to agglomeration. From an analysis of the explosive residue, the study found that nanoparticles of 35 nm Al powder became filamentous strands after an explosion, where most of 100 nm Al nanoparticles maintained a spherical structure, This may be because the initial melting temperature of 35 nm Al is 435.71°C, while that for 100 nm Al is 523.58°C, higher by 87.87°C. This study discovered that explosive property between the 35 nm Al and 100 nm Al powders after agglomeration were different.

Analysis of tensile strain enhancement in Ge nano-belts on an insulator surrounded by dielectrics

International Nuclear Information System (INIS)

Lu Wei-Fang; Li Cheng; Huang Shi-Hao; Lin Guang-Yang; Wang Chen; Yan Guang-Ming; Huang Wei; Lai Hong-Kai; Chen Song-Yan

2013-01-01

Ge nano-belts with large tensile strain are considered as one of the promising materials for high carrier mobility metal—oxide—semiconductor transistors and efficient photonic devices. In this paper, we design the Ge nano-belts on an insulator surrounded by Si 3 N 4 or SiO 2 for improving their tensile strain and simulate the strain profiles by using the finite difference time domain (FDTD) method. The width and thickness parameters of Ge nano-belts on an insulator, which have great effects on the strain profile, are optimized. A large uniaxial tensile strain of 1.16% in 50-nm width and 12-nm thickness Ge nano-belts with the sidewalls protected by Si 3 N 4 is achieved after thermal treatments, which would significantly tailor the band gap structures of Ge-nanobelts to realize the high performance devices. (condensed matter: electronic structure, electrical, magnetic, and optical properties)

Strain-induced modulation of near-field radiative transfer.

Science.gov (United States)

Ghanekar, Alok; Ricci, Matthew; Tian, Yanpei; Gregory, Otto; Zheng, Yi

2018-06-11

In this theoretical study, we present a near-field thermal modulator that exhibits change in radiative heat transfer when subjected to mechanical stress/strain. The device has two terminals at different temperatures separated by vacuum: one fixed and one stretchable. The stretchable side contains one-dimensional grating. When subjected to mechanical strain, the effective optical properties of the stretchable side are affected upon deformation of the grating. This results in modulation of surface waves across the interfaces influencing near-field radiative heat transfer. We show that for a separation of 100 nm, it is possible to achieve 25% change in radiative heat transfer for a strain of 10%.

Effect of 144Ce inhaled in fused-clay particles on the tracheobronchial lymph nodes

International Nuclear Information System (INIS)

Hahn, F.F.; Boecker, B.B.; Hobbs, C.H.; Jones, R.K.; Muggenburg, B.A.

1976-01-01

Tracheobronchial lymph node changes and lymphopenia are sequelae of inhalation of relatively insoluble radioactive aerosols by beagle dogs. The tracheobronchial lymph nodes from dogs that inhaled 144 Ce in fused-clay particles were examined at intervals from 2 to 730 days after exposure to assess the development of these lesions. Initial lung burdens in the dogs studied ranged from 33 to 63 μCi/kg of body weight. The concentration of radioisotope in the tracheobronchial lymph nodes increased during the first year after exposure and exceeded that in the lung about 100 days after exposure. Autoradiographs of the lymph nodes showed that 144 Ce particles were present in macrophages in the paracortical zone two days after exposure and that concentrations continued to increase in the paracortical zone and medullary cords. Histologic changes in the nodes included atrophy of the germinal centers and lymphocytic follicles, loss of lymphocytes and accumulation of macrophages in the paracortical zone, accumulation of pigment and isotope-laden macrophages in the medullary cords, occasional infiltrates of neutrophils in the medullary cords, and at later time periods focal fibrosis of the medullary cords. Tracheobronchial lymph node weights of the dogs exposed to 144 Ce in fused clay were not decreased until 512 days after exposure. These findings indicate that tracheobronchial lymph nodes accumulate relatively high burdens of 144 Ce after 144 Ce is inhaled in a relatively insoluble form and that the pathologic changes resulting from these burdens are basically atrophy of the nodes. Primary neoplasms in lymph nodes were not observed in dogs with initial lung burdens of 0.0024 to more than 30 μCi/kg of body weight followed for up to 2000 days after exposure. At the higher levels, however, a high incidence of primary pulmonary neoplasia was observed

24 CFR 943.144 - What financial impact do operations of a subsidiary, affiliate, or joint venture have on a PHA?

Science.gov (United States)

2010-04-01

... of a subsidiary, affiliate, or joint venture have on a PHA? 943.144 Section 943.144 Housing and Urban... CONSORTIA AND JOINT VENTURES Subsidiaries, Affiliates, Joint Ventures in Public Housing § 943.144 What financial impact do operations of a subsidiary, affiliate, or joint venture have on a PHA? Income generated...

Strained Si engineering for nanoscale MOSFETs

International Nuclear Information System (INIS)

Park, Jea-Gun; Lee, Gon-Sub; Kim, Tae-Hyun; Hong, Seuck-Hoon; Kim, Seong-Je; Song, Jin-Hwan; Shim, Tae-Hun

2006-01-01

We have revealed a strain relaxation mechanism for strained Si grown on a relaxed SiGe-on-insulator structure fabricated by the bonding, dislocation sink, or condensation method. Strain relaxation for both the bonding and dislocation sink methods was achieved by grading the Ge concentration; in contrast, the relaxation for the condensation method was achieved through Ge atom condensation during oxidation. In addition, we estimated the surface roughness and threading-dislocation pit density for relaxed SiGe layer fabricated by the bonding, dislocation sink, or condensation method. The surface roughness and threading-dislocation pit density for the bonding, dislocation sink, and condensation methods were 2.45, 0.46, and 0.40 nm and 5.0 x 10 3 , 9 x 10 3 , and 0, respectively. In terms of quality and cost-effectiveness, the condensation method was superior to the bonding and dislocation sink methods for forming strained Si on a relaxed SiGe-on-insulator structure

S-nitrosylation of TRIM72 at cysteine 144 is critical for protection against oxidation-induced protein degradation and cell death.

Science.gov (United States)

Kohr, Mark J; Evangelista, Alicia M; Ferlito, Marcella; Steenbergen, Charles; Murphy, Elizabeth

2014-04-01

Oxidative stress and membrane damage following myocardial ischemia/reperfusion injury are important contributors to cardiomyocyte death and the loss of myocardial function. Our previous study identified cysteine 144 (C144) of tripartite motif-containing protein 72 (TRIM72) as a potential site for S-nitrosylation (SNO). TRIM72 is a cardioprotective membrane repair protein that can be both activated and targeted for degradation by different oxidative modifications. Consistent with the potential regulation of TRIM72 by various oxidative modifications, we found that SNO levels increased at C144 of TRIM72 with ischemic preconditioning. Therefore, to investigate the role of C144 in the regulation of TRIM72 function, we mutated C144 of TRIM72 to a serine residue (TRIM72(C144S)), and expressed either TRIM72(WT) or TRIM72(C144S) in HEK-293 cells, which lack endogenous TRIM72, in order to examine the effect of this mutation on the functional stability of TRIM72 and on cell survival. We hypothesized that SNO of TRIM72 stabilizes the protein, thus allowing for membrane repair and enhanced cell survival. Upon treatment with hydrogen peroxide (H2O2), we found that TRIM72(WT) levels were decreased, but not TRIM72(C144S) and this correlated with increased H2O2-induced cell death in TRIM72(WT) cells. Additionally, we found that treatment with the cardioprotective S-nitrosylating agent S-nitrosoglutathione (GSNO), was able to preserve TRIM72(WT) protein levels and enhance TRIM72(WT)-mediated cell survival, but had no effect on TRIM72(C144S) levels. Consistent with our hypothesis, GSNO was also found to increase SNO levels and inhibit H2O2-induced irreversible oxidation for TRIM72(WT) without affecting TRIM72(C144S). In further support of our hypothesis, GSNO blocked the ischemia/reperfusion-induced decrease in TRIM72 levels and reduced infarct size in a Langendorff-perfused heart model. The results of these studies have important implications for cardioprotection and suggest that

Toxicity of 144Ce inhaled in a relatively insoluble form by immature Beagle dogs. VII

International Nuclear Information System (INIS)

Hanika-Rebar, C.; Hahn, F.F.; Boecker, B.B.; Mauderly, J.L.; McClellan, R.O.

1978-01-01

Immature Beagle dogs (approx. = 3 months of age at exposure) have been exposed by inhalation to a relatively insoluble form of 144 Ce (in fused aluminosilicate particles) to compare the resulting patterns of metabolism, dosimetry and biological effects with those seen in dogs exposed at 12 and 14 months of age and at 8 to 10.5 years of age. Five blocks of longevity animals, each consisting of 10 exposed dogs and one control, are currently being studied. The initial lung burdens of the 144 Ce-exposed dogs range from 0.004 to 140 μCi 144 Ce/kg body weight. Three dogs with initial lung burdens of 73 to 120 μCi 144 Ce/kg body weight died at 66 to 121 days after exposure with pulmonary injury and congestive heart failure. One dog with an initial lung burden of 140 μCi 144 Ce/kg body weight died at 91 days after exposure with severe radiation pneumonitis and minimal pulmonary fibrosis and another dog whose initial lung burden was 70 μCi 144 Ce/kg body weight died at 511 days after exposure with pulmonary injury that was mainly fibrotic in nature. Four dogs with initial lung burdens of 52 to 79 μCi/kg body weight had primary pulmonary hemangiosarcomas and died between 618 and 738 days, with cumulative average absorbed beta doses to lung of 23,000 to 31,000 rads. Two of these dogs, 1027S and 1024D, died within the past year. One dog with an initial lung burden of 28 μCi/kg body weight was euthanized at 1227 days after exposure with an hemangiosarcoma of the mediastinum. Within the past year, Dog 627S, with an initial lung burden of 48 μCi/kg body weight, died 1732 days after exposure with hemangiosarcoma primary in the liver or spleen. A dog with an initial lung burden of 12 μCi/kg body weight died from epilepsy at 1520 days after exposure. Serial observations are continuing on the surviving 37 exposed and five control dogs

25 CFR 170.144 - What are eligible highway safety projects?

Science.gov (United States)

2010-04-01

... RESERVATION ROADS PROGRAM Indian Reservation Roads Program Policy and Eligibility Highway Safety Functions... management system; (g) Education and outreach highway safety programs, such as use of child safety seats... 25 Indians 1 2010-04-01 2010-04-01 false What are eligible highway safety projects? 170.144...

Modulation of T cell cytokine production by miR-144* with elevated expression in patients with pulmonary tuberculosis.

Science.gov (United States)

Liu, Yanhua; Wang, Xinjing; Jiang, Jing; Cao, Zhihong; Yang, Bingfen; Cheng, Xiaoxing

2011-05-01

microRNAs have a critical role in regulating innate and adaptive immunity. To understand whether microRNAs play roles in regulating immune responses to Mycobacterium tuberculosis infection in humans, microRNA expression profiling was performed in PBMCs from pulmonary tuberculosis patients and healthy controls. Analysis of expression profiles showed that expression of 30 microRNAs was significantly altered during active TB as compared with healthy controls, 28 microRNAs were up-regulated and 2 microRNAs down-regulated. miR-144* was one of the microRNAs that were overexpressed in active TB patients. Real-time RT-PCR analysis showed that miR-144* was mainly expressed in T cells. Transfection of T cells with miR-144* precursor demonstrated that miR-144* could inhibit TNF-α and IFN-γ production and T cell proliferation. It is concluded that miR-144* might involve in regulation of anti-TB immunity through modification of cytokine production and cell proliferation of T cells. Copyright © 2011 Elsevier Ltd. All rights reserved.

Search for superdeformation in 144Gd

International Nuclear Information System (INIS)

Vivien, J.P.; Nourreddine, A.; Beck, F.A.; Byrski, T.; Gehringer, C.; Haas, B.; Merdinger, J.C.; Dudek, J.; Nazarewicz, W.

1986-01-01

Quasi-continuum γ-decay studies of 144 Gd have been performed using the 120 Sn( 28 Si,4n)reaction at 125, 135, 145 and 155 MeV bombarding energies. Angular distribution and multiplicity measurements have been done at the above energies. At 145 MeV bombarding energy a lifetime measurement has also been performed. Although a collective behaviour has been observed, the present data do not give evidence for population of superdeformed rotational bands. Theoretical interpretation using the cranking model with the Woods-Saxon field is given. The effects of temperature and pairing on the superdeformed configuration are discussed; superdeformation effects are predicted to disappear below I ∼ 60-70 ℎ when temperature exceeds ∼ 500 KeV

Misfit strain relaxation in (Ba0.60Sr0.40)TiO3 epitaxial thin films on orthorhombic NdGaO3 substrates

Science.gov (United States)

Simon, W. K.; Akdogan, E. K.; Safari, A.

2006-07-01

Strain relaxation in (Ba0.60Sr0.40)TiO3 (BST) thin films on ⟨110⟩ orthorhombic NdGaO3 substrates is investigated by x-ray diffractometry. Pole figure analysis indicates a [010]BST∥[1¯10]NGO and [001]BST∥[001]NGO in-plane and [100]BST∥[100]NGO out-of-plane epitaxial relationship. The residual strains are relaxed at h ˜200nm, and for h >600nm, films are essentially strain free. Two independent dislocations mechanisms operate to relieve the anisotropic misfit strains along the principal directions. The critical thickness for misfit dislocation formation along [001] and [010] are 11 and 15nm, respectively. Stress analysis indicates deviation from linear elasticity for h <200. The films with 10nm are of monoclinic symmetry due to a finite principal shear stress along [110] of the initial orthorhombic cell.

Lessons Learned from Surveillance of Antimicrobial Susceptibilities of Pseudomonas aeruginosa at a Large Academic Medical Center

Directory of Open Access Journals (Sweden)

Brett H. Heintz

2010-04-01

Full Text Available This research report assessed the differences in resistance rates and antimicrobial usage-versus-susceptibility relationships of Pseudomonas aeruginosa found in various hospital patient care areas. A simplified case control study was also performed to identify patient-specific risk factors associated with cefepime-resistant P. aeruginosa isolates. Last, we determined the consequence of combining mucoid and non-mucoid derived antimicrobial susceptibilities of P. aeruginosa into hospital antibiograms. Overall, susceptibility rates remained lower in the intensive care units (ICUs compared to the non-ICU patient care areas, except for cefepime over the last time period. Cefepime utilization and antimicrobial-resistance rates among P. aeruginosa isolates had a significant relationship. Decreased meropenem exposure was associated with lower resistance rates relative to cefepime. Risk factors independently associated with cefepime-resistant P. aeruginosa were structural lung disease, ICU admission, recent third generation cephalosporin use, frequent hospital admission and non-urine isolates. Large and statistically significant differences were observed between non-mucoid and combined percent susceptibility data for aminoglycosides. To control antimicrobial resistance and optimize initial empiric antimicrobial therapy, antimicrobial susceptibility and utilization patterns in specific patient care areas should be monitored and risk factors for antimicrobial resistance should be assessed. Mucoid strains of P. aeruginosa should not be included into antimicrobial susceptibility data as this may underestimate activity of most antipseudomonal agents.

Estimation of lattice strain in nanocrystalline RuO2 by Williamson-Hall and size-strain plot methods

Science.gov (United States)

Sivakami, R.; Dhanuskodi, S.; Karvembu, R.

2016-01-01

RuO2 nanoparticles (RuO2 NPs) have been successfully synthesized by the hydrothermal method. Structure and the particle size have been determined by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and transmission electron microscopy (TEM). UV-Vis spectra reveal that the optical band gap of RuO2 nanoparticles is red shifted from 3.95 to 3.55 eV. BET measurements show a high specific surface area (SSA) of 118-133 m2/g and pore diameter (10-25 nm) has been estimated by Barret-Joyner-Halenda (BJH) method. The crystallite size and lattice strain in the samples have been investigated by Williamson-Hall (W-H) analysis assuming uniform deformation, deformation stress and deformation energy density, and the size-strain plot method. All other relevant physical parameters including stress, strain and energy density have been calculated. The average crystallite size and the lattice strain evaluated from XRD measurements are in good agreement with the results of TEM.

Quantifying the strain-induced dissolution of precipitates in Al alloy microstructures using nuclear magnetic resonance

International Nuclear Information System (INIS)

Hutchinson, C.R.; Loo, P.T.; Bastow, T.J.; Hill, A.J.; Costa Teixeira, J. da

2009-01-01

Nuclear magnetic resonance (NMR) has been used for the first time to directly monitor the dynamic partitioning of Cu atoms from shearable precipitates into the solid solution as a function of straining at room temperature in two Al-Cu-based alloys. Al-3Cu-0.05Sn (wt.%) and Al-2.5Mg-1.5Cu (wt.%) alloys were heat-treated to provide a fine distribution of ∼5 nm Guinier-Preston (GP) zones and <1 nm Guinier-Preston-Bagaryatsky (GPB) zones, respectively, and were then subjected to rolling strains up to 100%. It is shown that in the Al-Cu-0.05Sn alloy, strains up to ∼40% can pump solute from the ∼5 nm GP zones back into solid solution for the temperature and strain-rate of deformation employed here. In the case of the Al-Cu-Mg alloy, no dissolution of the GPB zones is observed. A simple model for the strain-induced dissolution of the shearable precipitates is given and compared with the experimental results. The dependence of the Cu repartitioning process on the precipitate size is emphasized. These observations and modeling give guidelines for the design of Al-Cu-based alloys to exploit the dynamic interplay of strain-induced Cu partitioning between metastable states, e.g. solid solution and GP (or GPB) zones, for tailoring ultimate mechanical properties. It is proposed that this strain-induced phase transformation is a form of dynamically responding microstructure that can be employed to obtain aluminum alloys with well-designed microstructures.

Biological effects of repeated inhalation exposure of beagle dogs to relatively insoluble aerosols of 144Ce

International Nuclear Information System (INIS)

Boecker, B.B.; Hahn, F.F.; Muggenburg, B.A.; McClellan, R.O.; Mauderly, J.L.; Pickrell, J.A.

1980-01-01

Beagle dogs were exposed repeatedly to a relatively insoluble form of 144 Ce (in fused aluminosilicate particles) to study the deposition, retention, and long-term biological effects for comparison with data from dogs that were exposed only once to a similar aerosol. Four groups of nine dogs each were exposed once every 8 weeks for 2 years (13 exposures) to achieve specified exposure goals. These goals were: to increase the lung burden by 2.5 μCi 144 Ce/kg body weight with each exposure; to reestablish lung burdens of 9 or 4.5 μCi 144 Ce/kg body weight and to expose controls to fused aluminosilicate particles containing nonradioactive cerium. To date, 19 exposed dogs and 2 control dogs have died or were euthanized. The most prevalent findings to date have been pulmonary carcinomas (7 dogs) and hemangiosarcomas in the tracheobronchial lymph nodes (3 dogs). Observations are continuing on the surviving 8 144 Ce-exposed and 7 control dogs who are now at approximately 2500 days (6.8 years) after the first exposure

Direct evidence of strain transfer for InAs island growth on compliant Si substrates

Energy Technology Data Exchange (ETDEWEB)

Marçal, L. A. B.; Magalhães-Paniago, R.; Malachias, Angelo, E-mail: angeloms@fisica.ufmg.br [Universidade Federal de Minas Gerais, Av. Antonio Carlos 6627, CEP 31270-901, Belo Horizonte (Brazil); Richard, M.-I. [European Synchrotron (ESRF), ID01 beamline, CS 40220, 38043 Grenoble Cedex 9 (France); Aix-Marseille University, IM2NP-CNRS, Faculté des Sciences de St Jérôme, 13397 Marseille (France); Cavallo, F. [Center for High Technology Materials, University of New Mexico, 1313 Goddard St., Albuquerque, New Mexico 87106 (United States); University of Wisconsin-Madison, 1500 Engineering Drive, Madison, Wisconsin 53706 (United States); Lagally, M. G. [University of Wisconsin-Madison, 1500 Engineering Drive, Madison, Wisconsin 53706 (United States); Schmidt, O. G. [Institute for Integrative Nanosciences, IFW-Dresden, D-01171 Dresden (Germany); Schülli, T. Ü. [European Synchrotron (ESRF), ID01 beamline, CS 40220, 38043 Grenoble Cedex 9 (France); Deneke, Ch. [Laboratório Nacional de Nanotecnologia (LNNano/CNPEM), C.P. 6192, CEP 13083-970, Campinas (Brazil)

2015-04-13

Semiconductor heteroepitaxy on top of thin compliant layers has been explored as a path to make inorganic electronics mechanically flexible as well as to integrate materials that cannot be grown directly on rigid substrates. Here, we show direct evidences of strain transfer for InAs islands on freestanding Si thin films (7 nm). Synchrotron X-ray diffraction measurements using a beam size of 300 × 700 nm{sup 2} can directly probe the strain status of the compliant substrate underneath deposited islands. Using a recently developed diffraction mapping technique, three-dimensional reciprocal space maps were reconstructed around the Si (004) peak for specific illuminated positions of the sample. The strain retrieved was analyzed using continuous elasticity theory via Finite-element simulations. The comparison of experiment and simulations yields the amount of strain from the InAs islands, which is transferred to the compliant Si thin film.

Crude petroleum-oil biodegradation efficiency of Bacillus subtilis and Pseudomonas aeruginosa strains isolated from a petroleum-oil contaminated soil from North-East India.

Science.gov (United States)

Das, Kishore; Mukherjee, Ashis K

2007-05-01

The efficiency of Bacillus subtilis DM-04 and Pseudomonas aeruginosa M and NM strains isolated from a petroleum contaminated soil sample from North-East India was compared for the biodegradation of crude petroleum-oil hydrocarbons in soil and shake flask study. These bacterial strains could utilize crude petroleum-oil hydrocarbons as sole source of carbon and energy. Bioaugmentation of TPH contaminated microcosm with P. aeruginosa M and NM consortia and B. subtilis strain showed a significant reduction of TPH levels in treated soil as compared to control soil at the end of experiment (120 d). P. aeruginosa strains were more efficient than B. subtilis strain in reducing the TPH content from the medium. The plate count technique indicated expressive growth and biosurfactant production by exogenously seeded bacteria in crude petroleum-oil rich soil. The results showed that B. subtilis DM-04 and P. aeruginosa M and NM strains could be effective for in situ bioremediation.

Correlated electron—hole transitions in wurtzite GaN quantum dots: the effects of strain and hydrostatic pressure

International Nuclear Information System (INIS)

Zheng Dongmei; Wang Zongchi; Xiao Boqi

2012-01-01

Within the effective-mass and finite-height potential barrier approximation, a theoretical study of the effects of strain and hydrostatic pressure on the exciton emission wavelength and electron—hole recombination rate in wurtzite cylindrical GaN/Al x Ga 1−x N quantum dots (QDs) is performed using a variational approach. Numerical results show that the emission wavelength with strain effect is higher than that without strain effect when the QD height is large (> 3.8 nm), but the status is opposite when the QD height is small (< 3.8 nm). The height of GaN QDs must be less than 5.5 nm for an efficient electron—hole recombination process due to the strain effect. The emission wavelength decreases linearly and the electron—hole recombination rate increases almost linearly with applied hydrostatic pressure. The hydrostatic pressure has a remarkable influence on the emission wavelength for large QDs, and has a significant influence on the electron—hole recombination rate for small QDs. Furthermore, the present numerical outcomes are in qualitative agreement with previous experimental findings under zero pressure. (semiconductor physics)

Toxicity of 144Ce inhaled in a relatively insoluble form by aged beagle dogs. VI

International Nuclear Information System (INIS)

Hahn, F.F.; Hanika-Rebar, C.; Boecker, B.B.; Hobbs, C.H.; McClellan, R.O.; Pickrell, J.A.

1977-01-01

The toxicity of 144 Ce inhaled in fused aluminosilicate particles by 8 to 10.5-year-old dogs is being investigated to provide information on age-related differences in the response of older members of the human population to accidental inhalation of radioactive aerosols. These data on aged dogs will be compared to the results of similar studies of dogs exposed at approximately 3 months or 12 to 14 months of age. Six blocks of five female dogs each have been divided into four exposure levels with mean initial lung burdens of 7.2, 14, 28 and 57 μCi 144 Ce/kg body weight. Six blocks of four male dogs each have been divided into three exposure levels with mean initial lung burdens of 7.2, 14 and 28 μCi 144 Ce/kg body weight. Controls in each block were exposed to fused aluminosilicate particles containing stable cerium. Eighteen dogs with initial lung burdens ranging from 14 to 75 μCi 144 Ce/kg body weight and cumulative doses to lung of from 22,000 to 74,000 rads have died or were euthanized 197 to 1207 days after exposure with clinicopathologic findings of radiation pneumonitis and pulmonary fibrosis

Retention Characteristics of CBTi144 Thin Films Explained by Means of X-Ray Photoemission Spectroscopy

Directory of Open Access Journals (Sweden)

G. Biasotto

2010-01-01

Full Text Available CaBi4Ti4O15 (CBTi144 thin films were grown on Pt/Ti/SiO2/Si substrates using a soft chemical solution and spin-coating method. Structure and morphology of the films were characterized by the X-ray Diffraction (XRD, Fourier-transform infrared spectroscopy (FT-IR, Raman analysis, X-ray photoemission spectroscopy (XPS, and transmission electron microscopy (TEM. The films present a single phase of layered-structured perovskite with polar axis orient. The a/b-axis orientation of the ferroelectric film is considered to be associated with the preferred orientation of the Pt bottom electrode. XPS measurements were employed to understand the nature of defects on the retention behavior of CBTi144 films. We have observed that the main source of retention-free characteristic of the capacitors is the oxygen environment in the CBTi144 lattice.

40 CFR 144.32 - Signatories to permit applications and reports.

Science.gov (United States)

2010-07-01

... Class II wells (see paragraph (b) of this section), shall be signed as follows: (1) For a corporation... for the corporation, or (ii) the manager of one or more manufacturing, production, or operating... applications submitted for Class II wells under § 144.31 shall be signed by a person described in paragraph (a...

Laser-induced photo-thermal strain imaging

Science.gov (United States)

Choi, Changhoon; Ahn, Joongho; Jeon, Seungwan; Kim, Chulhong

2018-02-01

Vulnerable plaque is the one of the leading causes of cardiovascular disease occurrence. However, conventional intravascular imaging techniques suffer from difficulty in finding vulnerable plaque due to limitation such as lack of physiological information, imaging depth, and depth sensitivity. Therefore, new techniques are needed to help determine the vulnerability of plaque, Thermal strain imaging (TSI) is an imaging technique based on ultrasound (US) wave propagation speed that varies with temperature of medium. During temperature increase, strain occurs in the medium and its variation tendency is depending on the type of tissue, which makes it possible to use for tissue differentiation. Here, we demonstrate laser-induced photo-thermal strain imaging (pTSI) to differentiate tissue using an intravascular ultrasound (IVUS) catheter and a 1210-nm continuous-wave laser for heating lipids intensively. During heating, consecutive US images were obtained from a custom-made phantom made of porcine fat and gelatin. A cross correlation-based speckle-tracking algorithm was then applied to calculate the strain of US images. In the strain images, the positive strain produced in lipids (porcine fat) was clearly differentiated from water-bearing tissue (gelatin). This result shows that laser-induced pTSI could be a new method to distinguish lipids in the plaque and can help to differentiate vulnerability of plaque.

Role of DNA damage in ultraviolet (313 nm) inactivation of yeasts Saccharomyces cerevisial

International Nuclear Information System (INIS)

Pospelov, M.E.; Ivanova, Eh.V.; Frajkin, G.Ya.

1984-01-01

Relative contribution of photoinhibition of cell respiration and DNA damage to lethal effect, caused by ultraviolet (UV) radiation of 313 m in certain yeast strains Saccharomyces cerevisiae, has been studied. It is shown that cell inactivation is mainly conditioned by DNA photodamage. When studying photoreactivation it has been established, that dimers of pyrimidine bases are the main lethal photoproducts, formed in DNA Under the effect of UV-radiation of 313 nm

Fixation of radioactive cerium-144 on white blood cells. Possibilities for use in physiopathology; Fixation du cerium radioactif ({sup 144}Ce) sur les globules blancs. Possibilites d'emploi en physiopathologie

Energy Technology Data Exchange (ETDEWEB)

Aeberhardt, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1958-07-01

From the study of the means of transport of cerium in the blood of various laboratory animals, after intra-venous injection of {sup 144}Ce-{sup 144}Pr without carrier, we have been able to show up the part played by the white cells in the transport of this fission product during its passage in the blood. This observation has led to the study, in vitro, of the methods of cerium fixation on the white cells, with a view to determining the possibilities of using this property for white cell labelling, the methods used up to the present not being entirely satisfactory. Using the method for the separation of the known constituents of the blood proposed by us in 1956, we have studied the cerium fixation under various conditions: - on suspensions of white cells from the rabbit, - on a suspension of human white cells, - on the white cells in whole from the rabbit. (author) [French] L'etude du mode de transport du cerium dans le sang chez differents animaux de laboratoire, apres injection intra-veineuse de {sup 144}Ce-{sup 144}Pr sans entraineur, nous a permis de mettre en evidence le rale des globules blancs dans le transport de ce produit de fission au cours de son passage dans le sang. Cette constatation nous a conduit a etudier, in vitro, les modalites de la fixation du cerium sur les globules blancs afin de preciser les possibilites d'utilisation de cette propriete pour le marquage des globules blancs, les methodes employees jusqu'ici ne donnant pas entiere satisfaction. Disposant de la methode de separation des elements figures du sang que nous avons proposee en 1956, nous avons etudie la fixation du cerium, dans diverses conditions: - sur des suspensions de globules blancs de lapin, - sur une suspension de globules blancs humains, - sur les globules blancs dans le sang total de lapin. (auteur)

Twin-Core Fiber-Based Mach Zehnder Interferometer for Simultaneous Measurement of Strain and Temperature

Science.gov (United States)

Kowal, Dominik; Urbanczyk, Waclaw; Mergo, Pawel

2018-01-01

In this paper we present an all-fiber interferometric sensor for the simultaneous measurement of strain and temperature. It is composed of a specially fabricated twin-core fiber spliced between two pieces of a single-mode fiber. Due to the refractive index difference between the two cores in a twin-core fiber, a differential interference pattern is produced at the sensor output. The phase response of the interferometer to strain and temperature is measured in the 850–1250 nm spectral range, showing zero sensitivity to strain at 1000 nm. Due to the significant difference in sensitivities to both parameters, our interferometer is suitable for two-parameter sensing. The simultaneous response of the interferometer to strain and temperature was studied using the two-wavelength interrogation method and a novel approach based on the spectral fitting of the differential phase response. As the latter technique uses all the gathered spectral information, it is more reliable and yields the results with better accuracy. PMID:29558386

Modulation of magnetic coercivity in Ni thin films by reversible control of strain

Energy Technology Data Exchange (ETDEWEB)

Lin, Wen-Chin, E-mail: wclin@ntnu.edu.tw [Department of Physics, National Taiwan Normal University, Taipei 116, Taiwan (China); Huang, Chia-Wei; Ting, Yi-Chieh; Lo, Fang-Yuh [Department of Physics, National Taiwan Normal University, Taipei 116, Taiwan (China); Chern, Ming-Yau [Department of Physics, National Taiwan University, Taipei 106, Taiwan (China)

2015-05-01

In this study, we demonstrated the magnetoelectric control of magnetic thin films. (111)-textured Pd/Ni/Pd thin films were prepared on mica/lead zirconium titanate (PZT) substrates for the investigation. The reversible modulation of magnetic coercivity in Ni films was observed through the electric-voltage-controlled strain variation from the PZT substrate. For 14 nm Ni film, the applied electric field of ±350 V/m led to ±0.5% strain variation of PZT, which was transferred to ±0.4% strain variation of Pd/Ni/Pd thin films on mica, and resulted in ∓17 Oe (∓5% of the preliminary magnetic coercivity). The reversible modulation of magnetic coercivity is supposed to be caused by the voltage-controlled strain through the magneto-elastic effect. - Highlights: • The magnetoelectric control of the magnetic coercivity of Pd/Ni/Pd thin films was demonstrated. • The ±0.4% strain variation of 14 nm Ni thin films resulted in ±17 Oe change of H{sub c}. • The reversible modulation of H{sub c} is supposed to be caused by the magneto-elastic effect.

Large angular momentum shape transitions in 144Gd and 152Dy

International Nuclear Information System (INIS)

Nourreddine, A.

1986-09-01

In this work dealing principally with superdeformed states of nuclear matter, it has been shown that nuclei like 144 64 Gd 80 and 152 66 Dy 86 situated near the closed shells Z = 64 and N = 82 exhibit low spin (I [fr

Chemical synthesis and structure elucidation of bovine κ-casein (1-44)

International Nuclear Information System (INIS)

Bansal, Paramjit S.; Grieve, Paul A.; Marschke, Ronald J.; Daly, Norelle L.; McGhie, Emily; Craik, David J.; Alewood, Paul F.

2006-01-01

The caseins (α s1 , α s2 , β, and κ) are phosphoproteins present in bovine milk that have been studied for over a century and whose structures remain obscure. Here we describe the chemical synthesis and structure elucidation of the N-terminal segment (1-44) of bovine κ-casein, the protein which maintains the micellar structure of the caseins. κ-Casein (1-44) was synthesised by highly optimised Boc solid-phase peptide chemistry and characterised by mass spectrometry. Structure elucidation was carried out by circular dichroism and nuclear magnetic resonance spectroscopy. CD analysis demonstrated that the segment was ill defined in aqueous medium but in 30% trifluoroethanol it exhibited considerable helical structure. Further, NMR analysis showed the presence of a helical segment containing 26 residues which extends from Pro 8 to Arg 34 . This is First report which demonstrates extensive secondary structure within the casein class of proteins

Evaluation of n + 144,148,154Sm reaction data

International Nuclear Information System (INIS)

Ming Jianchuan; Zhuang Youxiang

2000-01-01

The neutron cross section data were evaluated for n + 144,148,154 Sm reaction in the energy range 10 -5 eV to 20 MeV. Spline function was used in the experimental data fit calculation. The corresponding JENDL-3 data are accepted in the energy range of 0.025 to 100 Kev. The comparisons among calculation data and experimental data, JENDL-3 data ENDF/B-6 data are presented

Microstructure and strain distribution in freestanding Si membrane strained by Si{sub x}N{sub y} deposition

Energy Technology Data Exchange (ETDEWEB)

Gao Hongye, E-mail: qgaohongye@msn.com [Faculty of Engineering Sciences, Kyushu University, 6-1 Kasuga-koen, Kasuga, Fukuoka 816-8580 (Japan); Ikeda, Ken-ichi; Hata, Satoshi; Nakashima, Hideharu [Faculty of Engineering Sciences, Kyushu University, 6-1 Kasuga-koen, Kasuga, Fukuoka 816-8580 (Japan); Wang Dong; Nakashima, Hiroshi [Art, Science and Technology Center for Cooperative Research, Kyushu University, 6-1 Kasuga-koen, Kasuga, Fukuoka 816-8580 (Japan)

2010-09-25

Research highlights: {yields} Strain is introduced by deposition of amorphous Si{sub x}N{sub y} to improve the carrier mobility for a relatively large-size freestanding semiconductor film, which can be used for the fabrication of relatively large devices such like a bipolar junction transistor. However, standard Raman spectroscopy and X-ray diffraction cannot provide sufficient lateral resolution to the strain in a relatively long (x {mu}m in length) and thin (x nm in thickness) freestanding semiconductor film. {yields} In present research, strain in a bridge-shaped freestanding Si membrane (FSSM) was measured by convergent-beam electron diffraction (CBED) and finite element method (FEM). Compressive strain distribution was shown in three dimensions (3D) in FSSM, where no threading dislocation or stacking fault was found. Relaxation of the strain in FSSM in 3D was discussed based on a comparison of the strain magnitudes in FSSM as measured by CBED and FEM. - Abstract: Strain in a bridge-shaped freestanding Si membrane (FSSM) induced by depositing an amorphous Si{sub x}N{sub y} layer was measured by convergent-beam electron diffraction (CBED). CBED results show that the strain magnitude depends negatively on the FSSM thickness. FEM is a supplement of the result of CBED due to the relaxation of TEM samples during fabricating. The FEM analysis results ascertain the strain property in three dimensions, and show that the strain magnitude depends negatively on the length of FSSM, and the magnitude of the compressive strain in FSSM increases as the position is closer to the upper Si/Si{sub x}N{sub y} interface.

MIR144* inhibits antimicrobial responses against Mycobacterium tuberculosis in human monocytes and macrophages by targeting the autophagy protein DRAM2.

Science.gov (United States)

Kim, Jin Kyung; Lee, Hye-Mi; Park, Ki-Sun; Shin, Dong-Min; Kim, Tae Sung; Kim, Yi Sak; Suh, Hyun-Woo; Kim, Soo Yeon; Kim, In Soo; Kim, Jin-Man; Son, Ji-Woong; Sohn, Kyung Mok; Jung, Sung Soo; Chung, Chaeuk; Han, Sang-Bae; Yang, Chul-Su; Jo, Eun-Kyeong

2017-02-01

Autophagy is an important antimicrobial effector process that defends against Mycobacterium tuberculosis (Mtb), the human pathogen causing tuberculosis (TB). MicroRNAs (miRNAs), endogenous noncoding RNAs, are involved in various biological functions and act as post-transcriptional regulators to target mRNAs. The process by which miRNAs affect antibacterial autophagy and host defense mechanisms against Mtb infections in human monocytes and macrophages is largely uncharacterized. In this study, we show that Mtb significantly induces the expression of MIR144*/hsa-miR-144-5p, which targets the 3'-untranslated region of DRAM2 (DNA damage regulated autophagy modulator 2) in human monocytes and macrophages. Mtb infection downregulated, whereas the autophagy activators upregulated, DRAM2 expression in human monocytes and macrophages by activating AMP-activated protein kinase. In addition, overexpression of MIR144* decreased DRAM2 expression and formation of autophagosomes in human monocytes, whereas inhibition of MIR144* had the opposite effect. Moreover, the levels of MIR144* were elevated, whereas DRAM2 levels were reduced, in human peripheral blood cells and tissues in TB patients, indicating the clinical significance of MIR144* and DRAM2 in human TB. Notably, DRAM2 interacted with BECN1 and UVRAG, essential components of the autophagic machinery, leading to displacement of RUBCN from the BECN1 complex and enhancement of Ptdlns3K activity. Furthermore, MIR144* and DRAM2 were critically involved in phagosomal maturation and enhanced antimicrobial effects against Mtb. Our findings identify a previously unrecognized role of human MIR144* in the inhibition of antibacterial autophagy and the innate host immune response to Mtb. Additionally, these data reveal that DRAM2 is a key coordinator of autophagy activation that enhances antimicrobial activity against Mtb.

Strain-dependent characterization of electrode and polymer network of electrically activated polymer actuators

Science.gov (United States)

Töpper, Tino; Osmani, Bekim; Weiss, Florian M.; Winterhalter, Carla; Wohlfender, Fabian; Leung, Vanessa; Müller, Bert

2015-04-01

Fecal incontinence describes the involuntary loss of bowel content and affects about 45 % of retirement home residents and overall more than 12 % of the adult population. Artificial sphincter implants for treating incontinence are currently based on mechanical systems with failure rates resulting in revision after three to five years. To overcome this drawback, artificial muscle sphincters based on bio-mimetic electro-active polymer (EAP) actuators are under development. Such implants require polymer films that are nanometer-thin, allowing actuation below 24 V, and electrodes that are stretchable, remaining conductive at strains of about 10 %. Strain-dependent resistivity measurements reveal an enhanced conductivity of 10 nm compared to 30 nm sputtered Au on silicone for strains higher than 5 %. Thus, strain-dependent morphology characterization with optical microscopy and atomic force microscopy could demonstrate these phenomena. Cantilever bending measurements are utilized to determine elastic/viscoelastic properties of the EAP films as well as their long-term actuation behavior. Controlling these properties enables the adjustment of growth parameters of nanometer-thin EAP actuators.

Halorhodopsin and photosensory behaviour in Halobacterium halobium mutant strain L-33

Energy Technology Data Exchange (ETDEWEB)

Traulich, B.; Wagner, G. (Botanisches Institut l der Justus-Liebig-Universitat, Giessen (Germany, F.R.)); Hildebrand, E.; Schimz, A. (Kernforschungsanlage Juelich G.m.b.H. (Germany, F.R.). Inst. fuer Neurobiologie); Lanyi, J.K. (California Univ., Irvine (USA))

1983-05-01

Halobacterium halobium, strain L-33, which is deficient in bacteriorhodopsin (BR) but synthesizes increased amounts of halorhodopsin (HR), responds to changes in fluence rate with visible light or with UV light. The observations support an earlier report that BR is not essential for photosensing in H. halobium. In the UV-range, changes in light intensity elicit the maximal response at lambda = 370 nm. In the visible range, changes in light intensity show the maximal response at lambda = 565 nm and a secondary peak at lambda = 590 nm. The latter corresponds to the absorption maximum of HR (lambdasub(max) = 588 nm). This light-energy converting retinal pigment of H. halobium thus appears to contribute to photosensory behavior.

The diagnostic dilemma of tumor induced osteomalacia: a retrospective analysis of 144 cases.

Science.gov (United States)

Feng, Juan; Jiang, Yan; Wang, Ou; Li, Mei; Xing, Xiaoping; Huo, Li; Li, Fang; Yu, Wei; Zhong, Ding-Rong; Jin, Jin; Liu, Yong; Qi, Fang; Lv, Wei; Zhou, Lian; Meng, Xun-Wu; Xia, Wei-Bo

2017-07-28

Diagnostic delay of tumor induced osteomalacia (TIO) is common in clinic practice. To investigate the diagnostic condition of TIO in China and raise clinicians' awareness of TIO, we retrospectively analyzed clinical manifestations, biochemical features, and specially evaluated missed diagnoses and misdiagnoses among 144 TIO patients from Peking Union Medical College Hospital during December 1982 to December 2014. Clinical presentations of TIO mainly included bone pain, difficulty in walking, pathological fractures, muscle weakness, and height loss. TIO patients demonstrated hypophosphatemia (0.48±0.13 mmol/L), elevated serum alkaline phosphatase (277.9±152.6 U/L), reduced tubular maximum for phosphorus/glomerular filtration rate (0.39±0.14) and markedly elevated serum fibroblast growth factor 23 (FGF23) (median level 302.9 pg/mL). The average time from onset to a correct diagnosis was 2.9±2.3 years while the mean duration from onset to tumor resection was 5.4±4.2 years. The initial misdiagnosis rate was 95.1% (137/144) and 240 case-times of misdiagnoses occurred among the 144 cases. The most frequent misdiagnoses were intervertebral disc herniation, spondyloarthritis (including ankylosing spondylitis) and osteoporosis. A total of 43.1% (62/144) cases with hypophosphatemia presented on their laboratory sheets were neglected and missed diagnosed. Our study showed that TIO was frequently misdiagnosed and missed diagnosed due to its rarity, insidious onset, nonspecific clinical manifestations and clinicians' poor recognition. It is necessary to test serum phosphorus in patients with musculoskeletal symptoms and difficulty in walking. The measurement of serum FGF23 is rather valuable. Once hypophosphatemia is discovered, TIO should be suspected and it is highly recommended to search for tumors and perform curative surgery.

Estimation of lattice strain in nanocrystalline RuO2 by Williamson-Hall and size-strain plot methods.

Science.gov (United States)

Sivakami, R; Dhanuskodi, S; Karvembu, R

2016-01-05

RuO2 nanoparticles (RuO2 NPs) have been successfully synthesized by the hydrothermal method. Structure and the particle size have been determined by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and transmission electron microscopy (TEM). UV-Vis spectra reveal that the optical band gap of RuO2 nanoparticles is red shifted from 3.95 to 3.55eV. BET measurements show a high specific surface area (SSA) of 118-133m(2)/g and pore diameter (10-25nm) has been estimated by Barret-Joyner-Halenda (BJH) method. The crystallite size and lattice strain in the samples have been investigated by Williamson-Hall (W-H) analysis assuming uniform deformation, deformation stress and deformation energy density, and the size-strain plot method. All other relevant physical parameters including stress, strain and energy density have been calculated. The average crystallite size and the lattice strain evaluated from XRD measurements are in good agreement with the results of TEM. Copyright © 2015 Elsevier B.V. All rights reserved.

Electron microscopic identification of Zinga virus as a strain of Rift Valley fever virus.

Science.gov (United States)

Olaleye, O D; Baigent, C L; Mueller, G; Tomori, O; Schmitz, H

1992-01-01

Electron microscopic examination of a negatively stained suspension of Zinga virus showed particles 90-100 nm in diameter, enveloped with spikes 12-20 nm in length and 5 nm in diameter. Further identification of the virus by immune electron microscopy showed the reactivity of human Rift Valley fever virus-positive serum with Zinga virus. Results of this study are in agreement with earlier reports that Zinga virus is a strain of Rift Valley fever virus.

A decade of user operation on the macromolecular crystallography MAD beamline ID14-4 at the ESRF

International Nuclear Information System (INIS)

McCarthy, Andrew A.; Brockhauser, Sandor; Nurizzo, Didier; Theveneau, Pascal; Mairs, Trevor; Spruce, Darren; Guijarro, Matias; Lesourd, Marc; Ravelli, Raimond B. G.; McSweeney, Sean

2009-01-01

The improvement of the X-ray beam quality achieved on ID14-4 by the installation of new X-ray optical elements is described. ID14-4 at the ESRF is the first tunable undulator-based macromolecular crystallography beamline that can celebrate a decade of user service. During this time ID14-4 has not only been instrumental in the determination of the structures of biologically important molecules but has also contributed significantly to the development of various instruments, novel data collection schemes and pioneering radiation damage studies on biological samples. Here, the evolution of ID14-4 over the last decade is presented, and some of the major improvements that were carried out in order to maintain its status as one of the most productive macromolecular crystallography beamlines are highlighted. The experimental hutch has been upgraded to accommodate a high-precision diffractometer, a sample changer and a large CCD detector. More recently, the optical hutch has been refurbished in order to improve the X-ray beam quality on ID14-4 and to incorporate the most modern and robust optical elements used at other ESRF beamlines. These new optical elements will be described and their effect on beam stability discussed. These studies may be useful in the design, construction and maintenance of future X-ray beamlines for macromolecular crystallography and indeed other applications, such as those planned for the ESRF upgrade

MicroRNA-Mediated Rescue of Fear Extinction Memory by miR-144-3p in Extinction-Impaired Mice.

Science.gov (United States)

Murphy, Conor P; Li, Xiang; Maurer, Verena; Oberhauser, Michael; Gstir, Ronald; Wearick-Silva, Luis Eduardo; Viola, Thiago Wendt; Schafferer, Simon; Grassi-Oliveira, Rodrigo; Whittle, Nigel; Hüttenhofer, Alexander; Bredy, Timothy W; Singewald, Nicolas

2017-06-15

MicroRNA (miRNA)-mediated control of gene expression suggests that miRNAs are interesting targets and/or biomarkers in the treatment of anxiety- and trauma-related disorders, where often memory-associated gene expression is adversely affected. The role of miRNAs in the rescue of impaired fear extinction was assessed using the 129S1/SvlmJ (S1) mouse model of impaired fear extinction. miRNA microarray analysis, reverse transcription polymerase chain reaction, fluorescent in situ hybridization, lentiviral overexpression, and Luciferase reporter assays were used to gain insight into the mechanisms underlying miRNA-mediated normalization of deficient fear extinction. Rescuing impaired fear extinction via dietary zinc restriction was associated with differential expression of miRNAs in the amygdala. One candidate, miR-144-3p, robustly expressed in the basolateral amygdala, showed specific extinction-induced, but not fear-induced, increased expression in both extinction-rescued S1 mice and extinction-intact C57BL/6 (BL6) mice. miR-144-3p upregulation and effects on subsequent behavioral adaption was assessed in S1 and BL6 mice. miR-144-3p overexpression in the basolateral amygdala rescued impaired fear extinction in S1 mice, led to enhanced fear extinction acquisition in BL6 mice, and furthermore protected against fear renewal in BL6 mice. miR-144-3p targets a number of genes implicated in the control of plasticity-associated signaling cascades, including Pten, Spred1, and Notch1. In functional interaction studies, we revealed that the miR-144-3p target, PTEN, colocalized with miR-144-3p in the basolateral amygdala and showed functional downregulation following successful fear extinction in S1 mice. These findings identify a fundamental role of miR-144-3p in the rescue of impaired fear extinction and suggest this miRNA as a viable target in developing novel treatments for posttraumatic stress disorder and related disorders. Copyright © 2017 Society of Biological

Ultra-high density out-of-plane strain sensor 3D architecture based on sub-20 nm PMOS FinFET

KAUST Repository

Ghoneim, Mohamed T.; Alfaraj, Nasir; Sevilla, Galo T.; Hussain, Muhammad Mustafa

2016-01-01

Future wearable electronics require not only flexibility but also preservation of the perks associated with today's high-performance, traditional silicon electronics. In this work we demonstrate a state-of-the-art fin-shaped field-effect transistor (FinFET)-based, out-of-plane strain sensor on flexible silicon through transforming the bulk device in a transfer-less process. The device preserves the functionality and high performance associated with its bulk, inflexible state. Furthermore, gate leakage current shows sufficient dependence on the value of the applied out-of-plane strain that enables permits use of the flexible device as a switching device as well as a strain sensor.

Ultra-high density out-of-plane strain sensor 3D architecture based on sub-20 nm PMOS FinFET

KAUST Repository

Ghoneim, Mohamed T.

2016-02-03

Future wearable electronics require not only flexibility but also preservation of the perks associated with today\\'s high-performance, traditional silicon electronics. In this work we demonstrate a state-of-the-art fin-shaped field-effect transistor (FinFET)-based, out-of-plane strain sensor on flexible silicon through transforming the bulk device in a transfer-less process. The device preserves the functionality and high performance associated with its bulk, inflexible state. Furthermore, gate leakage current shows sufficient dependence on the value of the applied out-of-plane strain that enables permits use of the flexible device as a switching device as well as a strain sensor.

Physical studies of strained Si/SiGe heterostructures. From virtual substrates to nanodevices

Energy Technology Data Exchange (ETDEWEB)

Minamisawa, Renato Amaral

2011-10-21

During the past two decades, the decrease in intrinsic delay of MOSFETs has been driven by the scaling of the device dimensions. The performance improvement has relied mostly in the increase of source velocity with gate scaling, while the transport properties of the channel have remained constant, i.e., those of conventional Si. Starting at the 90 nm node, uniaxial strain has been introduced in the transistor channel in order to further increase the source velocity. Beyond the 32 nm node, novel channel materials, with superior carrier velocities, and novel device architectures are required in order to continue the performance enhancement of MOSFETs while preserving the electrostatic control. In this Thesis, different physical aspects of strained Si and SiGe materials are investigated as a mean to increase carrier velocity in MOSFET channels. Novel approaches for the fabrication of strained Si based on ion implantation and anneal induced relaxation of virtual substrates are developed. The strain relaxation of SiGe layers is improved using a buried thin Si:C layer in the Si(100) substrate. Further, a Si{sup +} ion implantation and annealing method is investigated for relaxing virtual substrates using lower implantation dose. Finally, the uniaxial relaxation of {l_brace}110{r_brace} surface oriented substrates is demonstrated using a He ion implantation and anneal technique. Apart of channel material studies, the fundamental and technological challenges involved in the integration of strained Si and SiGe into MOSFETs are assessed. The impact of source and drain formation on the elastic strain and electrical properties of strained Si layers and nanowires is examined. Also, the formation of ultra-shallow junction in strained Si/strained Si{sub 0.5}Ge{sub 0.5}/SSOI heterostructures is investigated using different types of ion implanted specie and annealing. The results show that BF{sup +}{sub 2} implantation and low temperature annealing are suitable approaches for

Evaluation of local strain in Si using UV-Raman spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Ogura, Atsushi [School of Science and Technology, Meiji University, 1-1-1 Higashimita, Tama-ku, Kawasaki, Kanagawa 214-8571 (Japan)], E-mail: a_ogura@isc.meiji.ac.jp; Kosemura, Daisuke; Takei, Munehisa [School of Science and Technology, Meiji University, 1-1-1 Higashimita, Tama-ku, Kawasaki, Kanagawa 214-8571 (Japan); Uchida, Hidetsugu; Hattori, Nobuyoshi [Semiconductor Technology Academic Research Center, 3-17-2 Shinyokohama, Kouhoku-ku, Yokohama 220-0033 (Japan); Yoshimaru, Masaki [Semiconductor Business Group, Sony Corporation, Atsugi Tec., 4-14-1 Asahi-cho, Atsugi-shi, Kanagawa 243-0014 (Japan); Mayuzumi, Satoru [School of Science and Technology, Meiji University, 1-1-1 Higashimita, Tama-ku, Kawasaki, Kanagawa 214-8571 (Japan); Semiconductor Business Group, Sony Corporation, Atsugi Tec., 4-14-1 Asahi-cho, Atsugi-shi, Kanagawa 243-0014 (Japan); Wakabayashi, Hitoshi [Semiconductor Business Group, Sony Corporation, Atsugi Tec., 4-14-1 Asahi-cho, Atsugi-shi, Kanagawa 243-0014 (Japan)

2009-03-15

'Strained-Si', in which intentional strain is introduced in Si crystal to improve carrier mobility by using a modulated band structure, is recognized as one of the most important technologies in post-scaling-generation LSIs. Strain-evaluation technology to probe strain in shallow surfaces that correspond to the channels of MOSFETs is crucial to achieving strained-Si technology. In this paper, we introduce the results we obtained by evaluating strain with the new UV-Raman spectroscopy we developed. Quasi-line shape illumination enabled Raman measurements with 200-nm intervals on the sample. The local-strain mechanism caused by SiN stressors covering a MOSFET was clarified by measuring one-dimensional strain profiles induced by patterned SiN film on Si. We also demonstrated that the induced strain was proportional to the inner stresses of SiN film and that it is more effective to introduce strain in SOI substrates than in bulk substrates. In the evaluation of a actual device fabricated by using the gate-last process in which strain was significantly enhanced after the dummy gate was removed, the size effect, i.e., an increase in induced strain with a decrease in gate length, was confirmed through one-dimensional strain-profile measurements with various gate lengths.

Evaluation of local strain in Si using UV-Raman spectroscopy

International Nuclear Information System (INIS)

Ogura, Atsushi; Kosemura, Daisuke; Takei, Munehisa; Uchida, Hidetsugu; Hattori, Nobuyoshi; Yoshimaru, Masaki; Mayuzumi, Satoru; Wakabayashi, Hitoshi

2009-01-01

'Strained-Si', in which intentional strain is introduced in Si crystal to improve carrier mobility by using a modulated band structure, is recognized as one of the most important technologies in post-scaling-generation LSIs. Strain-evaluation technology to probe strain in shallow surfaces that correspond to the channels of MOSFETs is crucial to achieving strained-Si technology. In this paper, we introduce the results we obtained by evaluating strain with the new UV-Raman spectroscopy we developed. Quasi-line shape illumination enabled Raman measurements with 200-nm intervals on the sample. The local-strain mechanism caused by SiN stressors covering a MOSFET was clarified by measuring one-dimensional strain profiles induced by patterned SiN film on Si. We also demonstrated that the induced strain was proportional to the inner stresses of SiN film and that it is more effective to introduce strain in SOI substrates than in bulk substrates. In the evaluation of a actual device fabricated by using the gate-last process in which strain was significantly enhanced after the dummy gate was removed, the size effect, i.e., an increase in induced strain with a decrease in gate length, was confirmed through one-dimensional strain-profile measurements with various gate lengths.

Depth profile of strain and composition in Si/Ge dot multilayers by microscopic phonon Raman spectroscopy

International Nuclear Information System (INIS)

Tan, P.H.; Bougeard, D.; Abstreiter, G.; Brunner, K.

2005-01-01

We characterized strain and Ge content depending on depth in a self-assembled Si/Ge dot multilayer by scanning a microscopic Raman probe at a (110) cleavage plane. The multilayer structure was deposited by molecular-beam epitaxy on a (001) Si substrate and consisted of 80 periods, each of them composed by 25 nm Si spacers and 8 monolayer Ge forming laterally and vertically uncorrelated islands with a height of 2 nm and a lateral diameter of about 20 nm. An average biaxial strain of -3.5% within the core regions of islands is determined from the splitting of longitudinal and transversal optical Ge-Ge phonon modes observed in polarized Raman measurements. The absolute mode frequencies further enable analysis of a Ge content of 0.82. The analyzed strain and composition of islands are nearly independent from depths below the sample surface. This indicates well-controlled deposition parameters and negligible intermixing during deposition of subsequent layers. These Raman results are in agreement with x-ray diffraction data. Small, local Raman frequency shifts were observed and discussed with respect to partial elastic strain relaxation of the multilayer stack after cleavage, undefined Raman-scattering geometries at the sample edge, and local heating by the laser probe

Antimutagenic and radioprotective properties of products from Lactobacterium Bulgaricum strains

International Nuclear Information System (INIS)

Rupova, I.; Benova, D.; Yagova, A.; Topalova, S.

1993-01-01

The antimutagenic properties of the strains LBL-4 and LBL-144 have been studied by the incidence of micronuclei in polychromatic erythrocytes (PE) and endogenous spleen colony forming units (E-CFU) in C57BL mice. The lyophilized lactic acid products have been administered orally in the course of 3 weeks on 5 consecutive days. After the last treatment the mice have been gamma irradiated with 0.5, 3.0, 7.0 and 8.0 Gy. The prophylactic pretreatment of mice with LBL-4 in the schedule 3 x 5 days has shown a reduction of the induced micronuclei in PE after gamma irradiation with 3.0 Gy (37% compared to 50.5%; p < 0.001). The radiation effects caused by a lower dose of 0.5 Gy has not been modified by LBL-4 (36.7% compared to 33.8%). The application of LBL-144 does not reduce the mutagenic activity of both 0.5 and 3.0 Gy gamma rays. Applied independently, both LBL-4 and LBL-144 have shown the same frequency of micro-nucleated PE as the male and female mice controls. The radioprotective properties of LBL-4 have been assessed according to E-CFU and the changes in spleen weights after irradiation with 7.0 and 8.0 Gy gamma rays. The amount of E-CFU have been counted on day 9 after irradiation. A significant increase of spleen colony formation units has been established in mice pretreated with LBL-4. The spleen weights of the protected mice have been increased compared to unprotected animals. The results obtained show a good protection of haemopoietic stem cells by the product LBL-4. (author)

Out-of-plane strain effect on silicon-based flexible FinFETs

KAUST Repository

Ghoneim, Mohamed T.; Alfaraj, Nasir; Sevilla, Galo T.; Fahad, Hossain M.; Hussain, Muhammad Mustafa

2015-01-01

Summary form only given. We report out-of-plane strain effect on silicon based flexible FinFET, with sub 20 nm wide fins and hafnium silicate based high-κ gate dielectric. Since ultra-thin inorganic solid state substrates become flexible with reduced thickness, flexing induced strain does not enhance performance. However, detrimental effects arise as the devices are subject to various out-of-plane stresses (compressive and tensile) along the channel length.

Out-of-plane strain effect on silicon-based flexible FinFETs

KAUST Repository

Ghoneim, Mohamed T.

2015-06-21

Summary form only given. We report out-of-plane strain effect on silicon based flexible FinFET, with sub 20 nm wide fins and hafnium silicate based high-κ gate dielectric. Since ultra-thin inorganic solid state substrates become flexible with reduced thickness, flexing induced strain does not enhance performance. However, detrimental effects arise as the devices are subject to various out-of-plane stresses (compressive and tensile) along the channel length.

Mobility enhancement in tensile-strained Ge grown on InAlP metamorphic templates

International Nuclear Information System (INIS)

Wang, Kai; Gong, Qian; Zhou, Haifei; Kang, Chuanzhen; Yan, Jinyi; Liu, Qingbo; Wang, Shumin

2014-01-01

We investigated the growth of tensile-strained Ge on InAlP metamorphic templates by gas source molecular beam epitaxy. Good control of biaxial tensile strain in the Ge layer was demonstrated in the range of 0.5–2.0% by adjusting the In content of the metamorphic template. It was found that the growth of Ge was layer-by-layer (2D) even under high tensile strain of 2.0%, resulting in a smooth surface with roughness less than 1.5 nm. Hall results showed that the electron mobility of Ge increased monotonically with tensile strain.

Effects of Temperature and Axial Strain on Four-Wave Mixing Parametric Frequencies in Microstructured Optical Fibers Pumped in the Normal Dispersion Regime

Directory of Open Access Journals (Sweden)

Javier Abreu-Afonso

2014-10-01

Full Text Available A study of the effect of temperature and axial strain on the parametric wavelengths produced by four-wave mixing in microstructured optical fibers is presented. Degenerate four-wave mixing was generated in the fibers by pumping at normal dispersion, near the zero-dispersion wavelength, causing the appearance of two widely-spaced four-wave mixing spectral bands. Temperature changes, and/or axial strain applied to the fiber, affects the dispersion characteristics of the fiber, which can result in the shift of the parametric wavelengths. We show that the increase of temperature causes the signal and idler wavelengths to shift linearly towards shorter and longer wavelengths, respectively. For the specific fiber of the experiment, the band shift at rates ­–0.04 nm/ºC and 0.3 nm/ºC, respectively. Strain causes the parametric bands to shift in the opposite way. The signal band shifted 2.8 nm/me and the idler -5.4 nm/me. Experimental observations are backed by numerical simulations.

Nd:YAG 1.44 laser ablation of human cartilage

Science.gov (United States)

Cummings, Robert S.; Prodoehl, John A.; Rhodes, Anthony L.; Black, Johnathan D.; Sherk, Henry H.

1993-07-01

This study determined the effectiveness of a Neodymium:YAG 1.44 micrometers wavelength laser on human cartilage. This wavelength is strongly absorbed by water. Cadaveric meniscal fibrocartilage and articular hyaline cartilage were harvested and placed in normal saline during the study. A 600 micrometers quartz fiber was applied perpendicularly to the tissues with a force of 0.098 N. Quantitative measurements were then made of the ablation rate as a function of fluence. The laser energy was delivered at a constant repetition rate of 5 Hz., 650 microsecond(s) pulsewidth, and energy levels ranging from 0.5 joules to 2.0 joules. Following the ablation of the tissue, the specimens were fixed in formalin for histologic evaluation. The results of the study indicate that the ablation rate is 0.03 mm/mj/mm2 for hyaline cartilage and fibrocartilage. Fibrocartilage was cut at approximately the same rate as hyaline cartilage. There was a threshold fluence projected to be 987 mj/mm2 for hyaline cartilage and fibrocartilage. Our results indicate that the pulsed Nd:YAG laser operating at 1.44 micrometers has a threshold fluence above which it will ablate human cartilage, and that its ablation rate is directly proportional to fluence over the range of parameters tested. Fibrocartilage and hyaline cartilage demonstrated similar threshold fluence and ablation rates which is related to the high water content of these tissues.

Internal residual strain mapping in carburized chrome molybdenum steel after quenching by neutron strain scanning

International Nuclear Information System (INIS)

Sakaida, Yoshihisa; Serizawa, Takanobu; Manzanka, Michiya

2011-01-01

A hollow circular cylinder specimen with an annular U-notch of chrome molybdenum steel with 0.20 mass% C (SCM420) was carburized in carrier gas and quenched in oil bath. In order to determine the case depth, the specimen was cut off and carbon content and Vickers hardness gradients were measured experimentally near the carburized surface. The residual strain mapping in the interior of carburized cylinder was conducted nondestructively by neutron strain scanning. In this study, the neutron diffraction from Fe-211 plane was used for strain scanning. The neutron wavelength was tuned to 0.1654nm so that diffraction angle became about 90deg. Radial, hoop and axial residual strains were measured by scanning diffracting volume along the axial direction of cylinder specimen. Each residual strain was calculated from lattice spacing change. Unstressed lattice spacing was determined experimentally using reference coupon specimens that were cut from the interior of same carburized cylinder. As a result, the diffraction peak width at half height, FWHM, near the carburized surface was about 3.7 times wider than that of coupon specimens. On the other hand, the most peak widths in the interior equaled to that of coupon specimens. Peak width broadened slightly as the diffracting volume approached the carburized case layer. From the center to the quarter of cylinder specimen, the hoop and axial strains were tensile, and the radial one was compressive in the interior. From the quarter to the edge of the cylinder specimen, the hoop tensile strain increased, radial and axial strains changed to tensile and compressive, respectively. Therefore, the interior of the cylinder specimen was found to be deformed elastically to balance the existence of compressive residual stresses in the carburized case layer. (author)

Power scaling of laser diode pumped Pr3+:LiYF4 cw lasers: efficient laser operation at 522.6 nm, 545.9 nm, 607.2 nm, and 639.5 nm.

Science.gov (United States)

Gün, Teoman; Metz, Philip; Huber, Günter

2011-03-15

We report efficient cw laser operation of laser diode pumped Pr(3+)-doped LiYF4 crystals in the visible spectral region. Using two InGaN laser diodes emitting at λ(P)=443.9 nm with maximum output power of 1 W each and a 2.9-mm-long crystal with a doping concentration of 0.5%, output powers of 938 mW, 418 mW, 384 mW, and 773 mW were achieved for the laser wavelengths 639.5 nm, 607.2 nm, 545.9 nm, and 522.6 nm, respectively. The maximum absorbed pump powers were approximately 1.5 W, resulting in slope efficiencies of 63.6%, 32.0%, 52.1%, and 61.5%, as well as electro-optical efficiencies of 9.4%, 4.2%, 3.8%, and 7.7%, respectively. Within these experiments, laser diode-pumped laser action at 545.9 nm was demonstrated for what is believed to be the first time.

Development of a contact probe incorporating a Bragg grating strain sensor for nano coordinate measuring machines

International Nuclear Information System (INIS)

Ji, H; Hsu, H-Y; Kong, L X; Wedding, A B

2009-01-01

This paper presents a novel optical fibre based micro contact probe system with high sensitivity and repeatability. In this optical fibre probe with a fused spherical tip, a fibre Bragg grating has been utilized as a strain sensor in the probe stem. When the probe tip contacts the surface of the part, a strain will be induced along the probe stem and will produce a Bragg wavelength shift. The contact signal can be issued once the wavelength shift signal is produced and demodulated. With the fibre grating sensor element integrated into the probe directly, the probe system shows a high sensitivity. In this work, the strain distributions along the probe stem with the probe under axial and lateral load are analysed. A simulation of the strain distribution was performed using the finite element package ANSYS 11. Performance tests using a piezoelectric transducer stage with a displacement resolution of 1.5 nm yielded a measurement resolution of 60 nm under axial loading

Alteration by lung lavage of the biological effects from inhalation of a relatively insoluble form of 144Ce by beagle dogs

International Nuclear Information System (INIS)

Muggenburg, B.A.; Hahn, F.F.; Boecker, B.B.; Mauderly, J.L.; McClellan, R.O.

1977-01-01

The efficacy of lung lavage to remove a relatively insoluble form of 144 Ce from the lung as a means to prevent or alter serious biological effects was evaluated in 21 Beagle dogs. The dogs were divided into five groups. Eight dogs (Group 1) were treated with a series of ten lung lavages between day 2 and day 56 after exposure to 144 Ce. Three dogs (Group 2) were treated with 20 lung lavages from day 2 to day 82 after exposure to 144 Ce. The third group consisted of four dogs and was exposed to 144 Ce but was not treated. Four dogs (Group 4) were given ten lung lavages as in Group 1 but were not exposed to 144 Ce. Two dogs (Group 5) were given 20 lung lavages like the Group 2 dogs but were not exposed to 144 Ce. All but one of the exposed untreated dogs died between 209 to 240 days after inhalation exposure with radiation pneumonitis. The remaining dog died 1072 days after inhalation exposure with a pulmonary carcinoma. All of the treated dogs (Groups 1 and 2) have died except for one dog. Two dogs died with radiation pneumonitis at 170 and 296 days after 144 Ce exposure. The remaining dogs died from 815 to 1773 days after exposure with malignant tumors. The unexposed treated dogs are all alive. Lung lavage appeared to prolong life in the treated dogs and most dogs died with neoplasia rather than with any acute or chronic inflammatory disease

Assessement of the effect of Pyrimetin in combined injury with external irradiation and oral cerium-144 incorporation

International Nuclear Information System (INIS)

Kiradzhiev, G.; Khadzhidekova, E.

1985-01-01

The effect of the preparation Pyrimetin on rats, subjected to external irradiation combined with oral cerium 144 incorporation was studied. LD 50/30 of cerium-144 was used as biological criterion. It was shown that by this criterion Pyrimetin essentially abolished the potentiated by external radiation effect of cerium. Probably, the preparation leads to normalization of the gastro-intestinal motor function and the dose loading of the colon

High power diode lasers emitting from 639 nm to 690 nm

Science.gov (United States)

Bao, L.; Grimshaw, M.; DeVito, M.; Kanskar, M.; Dong, W.; Guan, X.; Zhang, S.; Patterson, J.; Dickerson, P.; Kennedy, K.; Li, S.; Haden, J.; Martinsen, R.

2014-03-01

There is increasing market demand for high power reliable red lasers for display and cinema applications. Due to the fundamental material system limit at this wavelength range, red diode lasers have lower efficiency and are more temperature sensitive, compared to 790-980 nm diode lasers. In terms of reliability, red lasers are also more sensitive to catastrophic optical mirror damage (COMD) due to the higher photon energy. Thus developing higher power-reliable red lasers is very challenging. This paper will present nLIGHT's released red products from 639 nm to 690nm, with established high performance and long-term reliability. These single emitter diode lasers can work as stand-alone singleemitter units or efficiently integrate into our compact, passively-cooled Pearl™ fiber-coupled module architectures for higher output power and improved reliability. In order to further improve power and reliability, new chip optimizations have been focused on improving epitaxial design/growth, chip configuration/processing and optical facet passivation. Initial optimization has demonstrated promising results for 639 nm diode lasers to be reliably rated at 1.5 W and 690nm diode lasers to be reliably rated at 4.0 W. Accelerated life-test has started and further design optimization are underway.

Capsule production by Pseudomonas aeruginosa

Energy Technology Data Exchange (ETDEWEB)

Lynn, A.R.

1984-01-01

Mucoid strains of Pseudomonas aeruginosa, associated almost exclusively with chronic respiratory infections in patients with cystic fibrosis, possess a capsule composed of alginic acid similar to one produced by Azotobacter vinelandii. Recent reports have provided evidence that the biosynthetic pathway for alginate in P. aeruginosa may differ from the pathway proposed for A. vinelandii in that synthesis in P. aeruginosa may occur by way of the Entner-Doudoroff pathway. Incorporation of isotope from (6-/sup 14/C)glucose into alginate by both P. aueroginosa and A. vinelandii was 10-fold greater than that from either (1-/sup 14/C)/sup -/ or (2-/sup 14/C)glucose, indicating preferential utilization of the bottom half of the glucose molecule for alginate biosynthesis. These data strongly suggest that the Entner-Doudoroff pathway plays a major role in alginate synthesis in both P. aeruginosa and A. vinelandii. The enzymes of carbohydrate metabolism in mucoid strains of P. aeruginosa appear to be unchanged whether alignate is actively produced or not and activities do not differ significantly from nonmucoid strain PAO.

A Whitham-Theory Sonic-Boom Analysis of the TU-144 Aircraft at a Mach Number of 2.2

Science.gov (United States)

Mack, Robert J.

1999-01-01

Officially, the Tu-144 was the first supersonic-cruise, passenger-carrying aircraft to enter commercial service. Design, construction, and testing were carried out by the Soviet Union, flight certification was by the Soviet Union, and the only regular passenger flights were scheduled and flown across the territory of the Soviet Union. Although it was not introduced to international passenger service, there were many significant engineering accomplishments achieved in the design, production, and flight of this aircraft. Development of the aircraft began with a prototype stage. Systematic testing and redesign led to a production aircraft in discrete stages that measurably improved the performance of the aircraft from the starting concept to final aircraft certification. It flew in competition with the English-French Concorde for a short time, but was withdrawn from national commercial service due to a lack of interest by airlines outside the Soviet Union. NASA became interested in the Tu- 144 aircraft when it was offered for use as a flying "testbed" in the study of operating characteristics of a supersonic-cruise commercial airplane. Since it had been in supersonic-cruise service, the Tu- 144 had operational characteris'tics similar to those anticipated in the conceptual aircraft designs being studied by the United States aircraft companies. In addition to the other operational tests being conducted on the Tu-144 aircraft, it was proposed that two sets of sonic-boom pressure signature measurements be made. The first set would be made on the ground, using techniques and devices similar to those in reference I and many other subsequent studies. A second set would be made in the air with an instrumented aircraft flying close under the Tu-144 in supersonic flight. Such in-flight measurements would require pressure gages that were capable of accurately recording the flow-field overpressures generated by the Tu- 144 at relatively close distances under the vehicle

Behaviour of 144Gd at very high angular momentum. Study of the continuum

International Nuclear Information System (INIS)

Nourreddine, A.

1984-01-01

The specific physical concepts that dictated the choice of 144 Gd for the present high spin study are presented in the first part of this work. The second part describes the various formalisms and techniques used to extract the multiplicities, multipolarities and moments of inertia from continuous γ ray spectra. The third part relates the results of the quasi-continuum γ ray of 144 Gd formed in the fusion-evaporation reaction 120 Sn( 28 Si, 4nγ) with four bombarding energies. A detailed balance of energy and angular momentum of the compound nucleus desexcitation has been given. Finally the evolution of the nuclear shape as a function of spin has been determined from the experimental data and interpreted by a combined micro and macroscopic theoretical calculations using a Woods-Saxon potential [fr

Hadean silicate differentiation preserved by anomalous 142Nd/144Nd ratios in the Réunion hotspot source

Science.gov (United States)

Peters, Bradley J.; Carlson, Richard W.; Day, James M. D.; Horan, Mary F.

2018-03-01

Active volcanic hotspots can tap into domains in Earth’s deep interior that were formed more than two billion years ago. High-precision data on variability in tungsten isotopes have shown that some of these domains resulted from differentiation events that occurred within the first fifty million years of Earth history. However, it has not proved easy to resolve analogous variability in neodymium isotope compositions that would track regions of Earth’s interior whose composition was established by events occurring within roughly the first five hundred million years of Earth history. Here we report 142Nd/144Nd ratios for Réunion Island igneous rocks, some of which are resolvably either higher or lower than the ratios in modern upper-mantle domains. We also find that Réunion 142Nd/144Nd ratios correlate with helium-isotope ratios (3He/4He), suggesting parallel behaviour of these isotopic systems during very early silicate differentiation, perhaps as early as 4.39 billion years ago. The range of 142Nd/144Nd ratios in Réunion basalts is inconsistent with a single-stage differentiation process, and instead requires mixing of a conjugate melt and residue formed in at least one melting event during the Hadean eon, 4.56 billion to 4 billion years ago. Efficient post-Hadean mixing nearly erased the ancient, anomalous 142Nd/144Nd signatures, and produced the relatively homogeneous 143Nd/144Nd composition that is characteristic of Réunion basalts. Our results show that Réunion magmas tap into a particularly ancient, primitive source compared with other volcanic hotspots, offering insight into the formation and preservation of ancient heterogeneities in Earth’s interior.

Coculture-inducible bacteriocin biosynthesis of different probiotic strains by dairy starter culture Lactococcus lactis

Directory of Open Access Journals (Sweden)

Blaženka Kos

2011-12-01

Full Text Available Bacteriocins produced by probiotic strains effectively contribute to colonization ability of probiotic strains and facilitate their establishment in the competitive gut environment and also protect the gut from gastrointestinal pathogens. Moreover, bacteriocins have received considerable attention due to their potential application as biopreservatives, especially in dairy industry. Hence, the objective of this research was to investigate antimicrobial activity of probiotic strains Lactobacillus helveticus M92, Lactobacillus plantarum L4 and Enterococcus faecium L3, with special focus on their bacteriocinogenic activity directed towards representatives of the same or related bacterial species, and towards distant microorganisms including potential food contaminants or causative agents of gut infections. In order to induce bacteriocin production, probiotic cells were cocultivated with Lactococcus lactis subsp. lactis LMG 9450, one of the most important starter cultures in cheese production. The presence of bacteriocin coding genes was investigated by PCR amplification with sequence-specific primers for helveticin and was confirmed for probiotic strain L. helveticus M92. All examined probiotic strains have shown bacteriocinogenic activity against Staphylococcus aureus 3048, Staphylococcus aureus K-144, Escherichia coli 3014, Salmonella enterica serovar Typhimurium FP1, Bacillus subtilis ATCC 6633, Bacillus cereus TM2, which is an important functional treat of probiotic strains significant in competitive exclusion mechanism which provides selective advantage of probiotic strains against undesirable microorganisms in gastrointestinal tract of the host. According to obtained results, living cells of starter culture Lc. lactis subsp. lactis LMG 9450 induced bacteriocin production by examined probiotic strains but starter culture itself was not sensitive to bacteriocin activity.

Ultraviolet action spectra for aerobic and anaerobic inactivation of Escherichia coli strains specifically sensitive and resistant to near ultraviolet radiations

International Nuclear Information System (INIS)

Peak, J.G.; Peak, M.J.; Tuveson, R.W.

1983-01-01

Action spectra for the lethal effects of ultraviolet light (254-434 nm) irradiation delivered under aerobic or anaerobic conditions to Escherichia coli RT2 (specifically sensitive to near-UV radiation; > 320 nm) and E. coli RT4 (near-UV resistant) were prepared. Negligible oxygen dependence was observed for both strains below about 315 nm. The oxygen enhancement ratio (OER) for RT4 increased above this wavelength to the longest wavelength used, whereas for RT2 there was a greater increase in the OER to a large peak at 365 nm, then a progressive decrease at longer wavelengths. The results are consistent with the possibility that the sensitivity of strain RT2 to near-UV radiation may be due to hyperproduction of photosensitizer, operating via photodynamic type reactions involving excited species of oxygen. (author)

Enzyme-linked immunosorbent assay (ELISA) for the detection of use of the synthetic cannabinoid agonists UR-144 and XLR-11 in human urine.

Science.gov (United States)

Mohr, Amanda L A; Ofsa, Bill; Keil, Alyssa Marie; Simon, John R; McMullin, Matthew; Logan, Barry K

2014-09-01

Ongoing changes in the synthetic cannabinoid drug market create the need for relevant targeted immunoassays for rapid screening of biological samples. We describe the validation and performance characteristics of an enzyme-linked immunosorbent assay designed to detect use of one of the most prevalent synthetic cannabinoids in urine, UR-144, by targeting its pentanoic acid metabolite. Fluorinated UR-144 (XLR-11) has been demonstrated to metabolize to this common product. The assay has significant cross-reactivity with UR-144-5-OH, UR-144-4-OH and XLR-11-4-OH metabolites, but assay's cutoff is 5 ng/mL relative to the pentanoic acid metabolite of UR-144, which is used as the calibrator. The method was validated with 90 positive and negative control urine samples for UR-144, XLR-11 and its metabolites tested versus liquid chromatography-tandem mass spectrometry. The accuracy, sensitivity and specificity were determined to be 100% for the assay at the specified cutoff. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Comprehensive study of proteasome inhibitors against Plasmodium falciparum laboratory strains and field isolates from Gabon

Directory of Open Access Journals (Sweden)

Kremsner Peter G

2008-09-01

Full Text Available Abstract Background The emergence and spread of Plasmodium falciparum resistance to almost all available antimalarial drugs necessitates the search for new chemotherapeutic compounds. The ubiquitin/proteasome system plays a major role in overall protein turnover, especially in fast dividing eukaryotic cells including plasmodia. Previous studies show that the 20S proteasome is expressed and catalytically active in plasmodia and treatment with proteasome inhibitors arrests parasite growth. This is the first comprehensive screening of proteasome inhibitors with different chemical modes of action against laboratory strains of P. falciparum. Subsequently, a selection of inhibitors was tested in field isolates from Lambaréné, Gabon. Methods Epoxomicin, YU101, YU102, MG132, MG115, Z-L3-VS, Ada-Ahx3-L3-VS, lactacystin, bortezomib (Velcade®, gliotoxin, PR11 and PR39 were tested and compared to chloroquine- and artesunate-activities in a standardized in vitro drug susceptibility assay against P. falciparum laboratory strains 3D7, D10 and Dd2. Freshly obtained field isolates from Lambaréné, Gabon, were used to measure the activity of chloroquine, artesunate, epoxomicin, MG132, lactacystin and bortezomib. Parasite growth was detected through histidine-rich protein 2 (HRP2 production. Raw data were fitted by a four-parameter logistic model and individual inhibitory concentrations (50%, 90%, and 99% were calculated. Results Amongst all proteasome inhibitors tested, epoxomicin showed the highest activity in chloroquine-susceptible (IC50: 6.8 nM [3D7], 1.7 nM [D10] and in chloroquine-resistant laboratory strains (IC50: 10.4 nM [Dd2] as well as in field isolates (IC50: 8.5 nM. The comparator drug artesunate was even more active (IC50: 1.0 nM, whereas all strains were chloroquine-resistant (IC50: 113 nM. Conclusion The peptide α',β'-epoxyketone epoxomicin is highly active against P. falciparum regardless the grade of the parasite's chloroquine

Biosynthesis of gold nanoparticles by actinomycete Streptomyces viridogens strain HM10.

Science.gov (United States)

Balagurunathan, R; Radhakrishnan, M; Rajendran, R Babu; Velmurugan, D

2011-10-01

Biosynthesis of gold nanoparticles by Streptomycetes from Himalayan Mountain was undertaken for the first time. Out of 10 actinomycete strains tested, four strains (D10, HM10, ANS2 and MSU) showed evidence for the intracellular biosynthesis of gold nanoparticles, among which the strain HM10 showed high potency. Presence of spherical and rod shaped gold nanoparticles in mycelium of the strain HM10 was determined by transmission electron microscopy (TEM) and X-ray diffraction analysis. The average particle size ranged from 18-20 nm. UV spectral analysis indicated that the reduction of chloroauric acid (HAuCl4) occurred within 24 h of reaction period. Further, the strain HM10 showed enhanced growth at 1 and 10 mM concentration of HAuCl4. The gold nanoparticles synthesized by the strain HM10 showed good antibacterial activity against S. aureus and E. coli in well-diffusion method. The potential actinomycete HM10 strain was phenotypically characterized and identified as Streptomyces viridogens (HM10). Thus, actinomycete strain HM10 reported in this study is a newly added source for the biosynthesis of gold nanoparticles.

Rapid Evaluation of Bacteriolysis of Listeria innocua and L. welshimeri Strains Isolated from Foods

OpenAIRE

ÇETİNKAYA, Figen; ÇIBIK, Recep

2014-01-01

This study was performed to determine the bacteriolytic extent of 10 strains of Listeria innocua and 9 strains of L. welshimeri isolated from foods. Bacteriolysis was measured at 650 nm by spectrophotometer. For this purpose, late exponential phase cells were transferred into potassium phosphate buffer (100 mM, pH 7.0) and incubated at 37 ºC. While the bacteriolysis range of L. innocua strains was 48% to 76% after 48 h of incubation, L. welshimeri isolates exhibited broader bacteriolytic vari...

Broadband light sources using InAs quantum dots with InGaAs strain-reducing layers

Energy Technology Data Exchange (ETDEWEB)

Tsuda, Megumi; Inoue, Tomoya; Kita, Takashi; Wada, Osamu [Department of Electrical and Electronic Engineering, Graduate School of Engineering, Kobe University, 1-1 Rokkodai, Nada, Kobe 657-8501 (Japan)

2011-02-15

We fabricated broadband superluminescent diodes (SLDs) for optical coherence tomography (OCT). We used three kinds of quantum dot (QD) layers with different emission peak wavelengths in the active region of SLD. The emission wavelength was controlled by reducing the strain in QDs; by using the In{sub 0.1}Ga{sub 0.9} As strain-reducing layer, the peak wavelength shifted toward the longer-wavelength side, and the photoluminescence peak intensity becomes strong in contrast to QDs on GaAs. By stacking these strain-controlled QD layers, the SLD device shows a broad electroluminescence spectrum with the center wavelength of 1130 nm and the spectral linewidth of approximately 240 nm at the injection of 1A caused by the increased emission intensity from the excited states. This corresponds to an resolution of 2.3 {mu}m in OCT. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Lateral surface superlattices in strained InGaAs layers

International Nuclear Information System (INIS)

Milton, B.

2000-08-01

Lateral Surface Superlattices were fabricated by etching in strained InGaAs layers above a GaAs/AlGaAs 2DEG channel. These were etched both by dry plasma wet chemical etching to produce periods of 100nm, 200nm and 300nm. These superlattices were fabricated on Hall bars to allow four terminal measurement and a blanket gate was placed on top, to allow variations in the carrier concentration. The magnetoresistance effects of these superlattices were studied at varying values of gate voltage, which varies the carrier concentration and the electrostatic periodic potential and at temperatures down to 45mK in a dilution refrigerator. From the oscillations observed in the magnetoresistance trace's it is possible to calculate the magnitude of the periodic potential. This showed that the etched, strained InGaAs was producing an anisotropic piezoelectric potential, along with an isotropic electrostatic potential. The variation in period allowed a study of the change of this piezoelectric potential with the period as well as a study of the interactions between the electrostatic and piezoelectric potentials. Further, at the lowest temperatures a strong interaction was observed between the Commensurability Oscillations, caused by the periodic potential, and the Shubnikov-de Haas Oscillations due to the Landau. Levels. This interaction was studied as it varied with temperature and carrier concentration. (author)

Read-through transcript from NM23-H1 into the neighboring NM23-H2 gene encodes a novel protein, NM23-LV

NARCIS (Netherlands)

Valentijn, Linda J.; Koster, Jan; Versteeg, Rogier

2006-01-01

NM23-H1 and NM23-H2 are neighboring genes on chromosome 17q. They encode nucleoside diphosphate kinases that have additional roles in signal transduction, transcription, and apoptosis. NM23-H1 expression is a strong marker for prognosis and metastatic behavior in many tumor types. A new

Cyr61/CCN1 displays high-affinity binding to the somatomedin B(1-44 domain of vitronectin.

Directory of Open Access Journals (Sweden)

Ivo M B Francischetti

2010-02-01

Full Text Available Cyr61 is a member of the CCN (Cyr61, connective tissue growth, NOV family of extracellular-associated (matricellular proteins that present four distinct functional modules, namely insulin-like growth factor binding protein (IGFBP, von Willebrand factor type C (vWF, thrombospondin type 1 (TSP, and C-terminal growth factor cysteine knot (CT domain. While heparin sulphate proteoglycans reportedly mediate the interaction of Cyr61 with the matrix and cell surface, the role of other extracellular associated proteins has not been revealed.In this report, surface plasmon resonance (SPR experiments and solid-phase binding assays demonstrate that recombinant Cyr61 interacts with immobilized monomeric or multimeric vitronectin (VTNC with K(D in the nanomolar range. Notably, the binding site for Cyr61 was identified as the somatomedin B domain (SMTB(1-44 of VTNC, which mediates its interaction with PAI-1, uPAR, and integrin alphav beta3. Accordingly, PAI-1 outcompetes Cyr61 for binding to immobilized SMTB(1-44, and Cyr61 attenuates uPAR-mediated U937 adhesion to VTNC. In contrast, isothermal titration calorimetry shows that Cyr61 does not display high-affinity binding for SMTB(1-44 in solution. Nevertheless, competitive ELISA revealed that multimeric VTNC, heat-modified monomeric VTNC, or SMTB(1-44 at high concentrations attenuate Cyr61 binding to immobilized VTNC, while monomeric VTNC was ineffective. Therefore, immobilization of VTNC exposes cryptic epitopes that recognize Cyr61 with high affinity, as reported for a number of antibodies, beta-endorphin, and other molecules.The finding that Cyr61 interacts with the SMTB(1-44 domain suggests that VTNC represent a point of anchorage for CCN family members to the matrix. Results are discussed in the context of the role of CCN and VTNC in matrix biology and angiogenesis.

First principles study on the interfacial properties of NM/graphdiyne (NM = Pd, Pt, Rh and Ir): The implications for NM growing

Energy Technology Data Exchange (ETDEWEB)

Lu, Zhansheng; Li, Shuo; Lv, Peng [College of Physics and Electronic Engineering, Henan Normal University, Xinxiang 453007 (China); He, Chaozheng, E-mail: hecz2013@nynu.edu.cn [College of Physics and Electronic Engineering, Nanyang Normal University, Nanyang 473061 (China); Ma, Dongwei [School of Physics, Anyang Normal University, Anyang 455000 (China); Yang, Zongxian, E-mail: yzx@henannu.edu.cn [College of Physics and Electronic Engineering, Henan Normal University, Xinxiang 453007 (China); Collaborative Innovation Center of Nano Functional Materials and Applications, Kaifeng (China)

2016-01-01

Graphical abstract: - Highlights: • The NM adatoms belong to embedded adsorption in 18C-hexagon of GDY. • The Rh and Ir/GDY can be applied to single metal catalysts or sensors. • A simple linear relationship between E{sub e-ads} and E{sub b} is presented. • The linear relationship can be used in the noble metal modified GDY. - Abstract: Based on the dispersion-corrected density functional calculations (DFT-D), we systematically studied the adsorption of noble metals (NM), Pd, Pt, Rh and Ir, on graphdiyne (GDY). We present a systematic study on the geometry, embedded adsorption energy and electronic structure of four different adatoms adsorbed on the GDY. The strong interaction between the NM adatoms and the GDY substrate is found with the NM embedded in the 18C-hexagon of the GDY. We investigated the mobility of the NM adatoms on the GDY, and found that the mobility barrier energy increases along with the increasing of the embedded adsorption energy. We present the NM adatoms growth of high concentrations on the GDY. Upon the analysis of the electronic structure and the frontier molecular orbitals, Rh and Ir adatoms of low concentrations (about 1.37 at%) on the GDY have the potential to be applied as single metal catalysts or gas molecule sensors.

Comparison of 193 nm and 308 nm laser liquid printing by shadowgraphy imaging

Energy Technology Data Exchange (ETDEWEB)

Palla-Papavlu, A., E-mail: apalla@nipne.ro [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, Magurele, RO-077125 Bucharest (Romania); Shaw-Stewart, J. [EMPA, Swiss Federal Laboratories for Materials Testing and Research, Laboratory for Functional Polymers, Überlandstrasse 129, 8600 Dübendorf (Switzerland); Paul Scherrer Institute, General Energy Research Department, 5232 Villigen PSI (Switzerland); Mattle, T. [Paul Scherrer Institute, General Energy Research Department, 5232 Villigen PSI (Switzerland); Dinca, V. [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, Magurele, RO-077125 Bucharest (Romania); Lippert, T.; Wokaun, A. [Paul Scherrer Institute, General Energy Research Department, 5232 Villigen PSI (Switzerland); Dinescu, M. [National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG-36, Magurele, RO-077125 Bucharest (Romania)

2013-08-01

Over the last years laser-induced forward transfer has emerged as a versatile and powerful tool for engineering surfaces with active compounds. Soft, easily damageable materials can be transferred using a triazene polymer as a sacrificial layer which acts as a pressure generator and at the same time protects the material from direct laser irradiation. To understand and optimize the transfer process of biomolecules in liquid solution by using an intermediate triazene polymer photosensitive layer, shadowgraphy imaging is carried out. Two laser systems i.e. an ArF laser operating at 193 nm and a XeCl laser operating at 308 nm are applied for the transfer. Solutions with 50% v/v glycerol concentration are prepared and the influence of the triazene polymer sacrificial layer thickness (60 nm) on the deposits is studied. The shadowgraphy images reveal a pronounced difference between laser-induced forward transfer using 193 nm or 308 nm, i.e. very different shapes of the ejected liquid.

Compact corner-pumped Nd:YAG/YAG composite slab 1319 nm/1338 nm laser

International Nuclear Information System (INIS)

Liu, H; Gong, M; Wushouer, X; Gao, S

2010-01-01

A corner-pumped type is a new pumping type in the diode-pumped solid-state lasers, which has the advantages of high pump efficiency and favorable pump uniformity. A corner-pumped Nd:YAG/YAG composite slab continuous-wave 1319 nm/1338 nm dual-wavelength laser is first demonstrated in this paper. When the cavity length is 25 mm, the maximal output power is up to 7.62 W with a slope efficiency of 16.6% and an optical-to-optical conversion efficiency of 17%. The corresponding spectral line widths of 1319 nm laser and 1338 nm laser are 0.11 and 0.1 nm, respectively. The short-term instability of the output power is better than 1% when the pumping power is 39.5 W. The experimental results show that a corner-pumped type is a kind of feasible schedules in the design of diode-pumped solid-state 1.3 μm lasers with low or medium output powers

Mucoid conversion of Pseudomonas aeruginosa by hydrogen peroxide: a mechanism for virulence activation in the cystic fibrosis lung

DEFF Research Database (Denmark)

Mathee, Kalai; Ciofu, Oana; Sternberg, Claus

1999-01-01

leukocytes (PMNs), which release free oxygen radicals such as H(2)O(2) The mucoid phenotype among the strains infecting CF patients indicates overproduction of a linear polysaccharide called alginate. To mimic the inflammatory environment of the CF lung, P. aeruginosa PAO1, a typical non-mucoid strain....... These findings indicate that gene activation in bacteria by toxic oxygen radicals, similar to that found in plants and mammalian cells, may serve as a defence mechanism for the bacteria. This suggests that mucoid conversion is a response to oxygen radical exposure and that this response is a mechanism of defence...... by the bacteria. This is the first report to show that PMNs and their oxygen radicals can cause this phenotypic and genotypic change which is so typical of the intractable form of P. aeruginosa in the CF lung. These findings may provide a basis for the development of anti-oxidant and anti-inflammatory therapy...

Quantum dots as mineral- and matrix-specific strain gages for bone biomechanical studies

Science.gov (United States)

Zhu, Peizhi; Xu, Jiadi; Morris, Michael; Ramamoorthy, Ayyalusamy; Sahar, Nadder; Kohn, David

2009-02-01

We report the use of quantum dots (Qdots) as strain gages in the study of bone biomechanics using solid state nuclear magnetic resonance (NMR) spectroscopy. We have developed solid state NMR sample cells for investigation of deformations of bone tissue components at loads up to several Mega Pascal. The size constraints of the NMR instrumentation limit the bone specimen diameter and length to be no greater than 2-3 mm and 30 mm respectively. Further, magic angle spinning (MAS) solid state NMR experiments require the use of non-metallic apparatus that can be rotated at kilohertz rates. These experimental constraints preclude the use of standard biomechanical measurement systems. In this paper we explore the use of quantum dot center of gravity measurement as a strain gage technology consistent with the constraints of solid state NMR. We use Qdots that bind calcium (625 nm emission) and collagen (705 nm emission) for measurement of strain in these components. Compressive loads are applied to a specimen in a cell through a fine pitch screw turned with a mini-torque wrench. Displacement is measured as changes in the positions of arrays of quantum dots on the surface of a specimen. Arrays are created by spotting the specimen with dilute suspensions of Qdots. Mineral labeling is achieved with 705 nm carboxylated dots and matrix labeling with 565 nm quantum dots conjugated to collagen I antibodies. After each load increment the new positions of the quantum dots are measured by fluorescence microscopy. Changes in Qdot center of gravity as a function of applied load can be measured with submicron accuracy.

Picosecond laser texturization of mc-silicon for photovoltaics: A comparison between 1064 nm, 532 nm and 355 nm radiation wavelengths

Energy Technology Data Exchange (ETDEWEB)

Binetti, Simona [Department of Materials Science and Milano-Bicocca Solar Energy Research Center (MIB-SOLAR), University of Milano-Bicocca, Via Cozzi 55, 20125 Milano (Italy); Le Donne, Alessia, E-mail: alessia.ledonne@mater.unimib.it [Department of Materials Science and Milano-Bicocca Solar Energy Research Center (MIB-SOLAR), University of Milano-Bicocca, Via Cozzi 55, 20125 Milano (Italy); Rolfi, Andrea [Department of Materials Science and Milano-Bicocca Solar Energy Research Center (MIB-SOLAR), University of Milano-Bicocca, Via Cozzi 55, 20125 Milano (Italy); Jäggi, Beat; Neuenschwander, Beat [Bern University of Applied Sciences, Engineering and Information Technology, Institute for Applied Laser, Photonics and Surface Technologies ALPS, Pestalozzistrasse 20, CH-3400 Burgdorf (Switzerland); Busto, Chiara [ENI Spa, Via Giacomo Fauser, 4, 28100 Novara (Italy); Frigeri, Cesare [CNR-IMEM Institute, Parco Area Delle Scienze 37/A, Fontanini, 43010 Parma (Italy); Scorticati, Davide; Longoni, Luca; Pellegrino, Sergio [Laserpoint Srl, Via Della Burrona 51, 20090 Vimodrone, Milano (Italy)

2016-05-15

Highlights: • Self-organized surface structures were produced by picosecond laser pulses on mc-Si. • Three laser wavelengths were used which effectively reduce Si reflectivity up to 8%. • The subsurface damage induced by the three lasers was studied in detail. • μ-Raman, PL and TEM proved that UV laser provides the lowest subsurface damage. • UV laser induced damage is located above the depletion region of the p–n junction. - Abstract: Self-organized surface structures were produced by picosecond laser pulses on multi-crystalline silicon for photovoltaic applications. Three different laser wavelengths were employed (i.e. 1064 nm, 532 nm and 355 nm) and the resulting morphologies were observed to effectively reduce the reflectivity of the samples after laser irradiation. Besides, a comparative study of the laser induced subsurface damage generated by the three different wavelengths was performed by confocal micro-Raman, photoluminescence and transmission electron microscopy. The results of both the structural and optical characterization showed that the mc-Si texturing performed with the laser at 355 nm provides surface reflectivity between 11% and 8% over the spectral range from 400 nm to 1 μm, while inducing the lowest subsurface damage, located above the depletion region of the p–n junction.

First-principles investigation of strain effects on the energy gaps in silicon nanoclusters

International Nuclear Information System (INIS)

Peng, X-H; Alizadeh, A; Bhate, N; Varanasi, K K; Kumar, S K; Nayak, S K

2007-01-01

First-principles density functional calculations were performed to study strain effects on the energy gaps in silicon nanoclusters with diameter ranging from 0.6 to 2 nm. Hydrostatic and non-hydrostatic strains have been found to affect the energy gaps differently. For the same strain energy density, non-hydrostatic strain leads to a significantly larger change in the energy gap of silicon clusters compared to that of the hydrostatic strain case. In contrast, hydrostatic and non-hydrostatic strain effects on the energy gaps of bulk Si or larger size Si quantum dots are comparable. Non-hydrostatic strains break the tetrahedral bonding symmetry in silicon, resulting in significant variation in the energy gaps due to the splitting of the degenerate orbitals in the clusters. Our results suggest that the combination of energy gaps and strains permits the engineering of photoluminescence in silicon nanoclusters and offers the possibility of designing novel optical devices and chemical sensors

Strain relaxation of CdTe on Ge studied by medium energy ion scattering

Energy Technology Data Exchange (ETDEWEB)

Pillet, J.C., E-mail: jean-christophe.pillet@cea.fr [Univ. Grenoble Alpes, CEA, LETI, MINATEC campus, F38000 Grenoble (France); CEA, LETI, Département Optique et Photonique, F38054 Grenoble (France); Pierre, F. [Univ. Grenoble Alpes, CEA, LETI, MINATEC campus, F38000 Grenoble (France); CEA, LETI, Service de Caractérisation des Matériaux et Composants, F38054 Grenoble (France); Jalabert, D. [Univ. Grenoble Alpes, CEA, LETI, MINATEC campus, F38000 Grenoble (France); CEA-INAC/UJF-Grenoble 1 UMR-E, SP2M, LEMMA, Minatec Grenoble F-38054 (France)

2016-10-01

We have used the medium energy ion scattering (MEIS) technique to assess the strain relaxation in molecular-beam epitaxial (MBE) grown CdTe (2 1 1)/Ge (2 1 1) system. A previous X-ray diffraction study, on 10 samples of the same heterostructure having thicknesses ranging from 25 nm to 10 μm has allowed the measurement of the strain relaxation on a large scale. However, the X-ray diffraction measurements cannot achieve a stress measurement in close proximity to the CdTe/Ge interface at the nanometer scale. Due to the huge lattice misfit between the CdTe and Ge, a high degree of disorder is expected at the interface. The MEIS in channeling mode is a good alternative in order to profile defects with a high depth resolution. For a 21 nm thick CdTe layer, we observed, at the interface, a high density of Cd and/or Te atoms moved from their expected crystallographic positions followed by a rapid recombination of defects. Strain relaxation mechanisms in the vicinity of the interface are discussed.

Strain dependent microstructural modifications of BiCrO{sub 3} epitaxial thin films

Energy Technology Data Exchange (ETDEWEB)

Kannan, Vijayanandhini, E-mail: kvnandhini@gmail.com [Max Planck Institute of Microstructure Physics, Weinberg 2, D-06120 Halle (Saale) (Germany); CNRS, University of Bordeaux, ICMCB, UPR 9048, F-33600 Pessac (France); Arredondo, Miryam; Johann, Florian; Hesse, Dietrich [Max Planck Institute of Microstructure Physics, Weinberg 2, D-06120 Halle (Saale) (Germany); Labrugere, Christine [CNRS, University of Bordeaux, ICMCB, UPR 9048, F-33600 Pessac (France); CeCaMA, University of Bordeaux, ICMCB, F-33600 Pessac (France); Maglione, Mario [CNRS, University of Bordeaux, ICMCB, UPR 9048, F-33600 Pessac (France); Vrejoiu, Ionela [Max Planck Institute of Microstructure Physics, Weinberg 2, D-06120 Halle (Saale) (Germany)

2013-10-31

Strain-dependent microstructural modifications were observed in epitaxial BiCrO{sub 3} (BCO) thin films fabricated on single crystalline substrates, utilizing pulsed laser deposition. The following conditions were employed to modify the epitaxial-strain: (i) in-plane tensile strain, BCO{sub STO} [BCO grown on buffered SrTiO{sub 3} (001)] and in-plane compressive strain, BCO{sub NGO} [BCO grown on buffered NdGaO{sub 3} (110)] and (ii) varying BCO film thickness. A combination of techniques like X-ray diffraction, X-ray photoelectron spectroscopy (XPS) and high resolution transmission electron microscopy (TEM) was used to analyse the epitaxial growth quality and the microstructure of BCO. Our studies revealed that in the case of BCO{sub STO}, a coherent interface with homogeneous orthorhombic phase is obtained only for BCO film with thicknesses, d < 50 nm. All the BCO{sub STO} films with d ≥ 50 nm were found to be strain-relaxed with an orthorhombic phase showing 1/2 <100> and 1/4 <101> satellite reflections, the latter oriented at 45° from orthorhombic diffraction spots. High angle annular dark field scanning TEM of these films strongly suggested that the satellite reflections, 1/2 <100> and 1/4 <101>, originate from the atomic stacking sequence changes (or “modulated structure”) as reported for polytypes, without altering the chemical composition. The unaltered stoichiometry was confirmed by estimating both valency of Bi and Cr cations by surface and in-depth XPS analysis as well as the stoichiometric ratio (1 Bi:1 Cr) using scanning TEM–energy dispersive X-ray analysis. In contrast, compressively strained BCO{sub NGO} films exhibited monoclinic symmetry without any structural modulations or interfacial defects, up to d ∼ 200 nm. Our results indicate that both the substrate-induced in-plane epitaxial strain and the BCO film thickness are the crucial parameters to stabilise a homogeneous BCO phase in an epitaxially grown film. - Highlights: • Phase pure

Controlled assembly and single electron charging of monolayer protected Au144 clusters: an electrochemistry and scanning tunneling spectroscopy study

Science.gov (United States)

Bodappa, Nataraju; Fluch, Ulrike; Fu, Yongchun; Mayor, Marcel; Moreno-García, Pavel; Siegenthaler, Hans; Wandlowski, Thomas

2014-11-01

Single gold particles may serve as room temperature single electron memory units because of their size dependent electronic level spacing. Here, we present a proof-of-concept study by electrochemically controlled scanning probe experiments performed on tailor-made Au particles of narrow dispersity. In particular, the charge transport characteristics through chemically synthesized hexane-1-thiol and 4-pyridylbenzene-1-thiol mixed monolayer protected Au144 clusters (MPCs) by differential pulse voltammetry (DPV) and electrochemical scanning tunneling spectroscopy (EC-STS) are reported. The pyridyl groups exposed by the Au-MPCs enable their immobilization on Pt(111) substrates. By varying the humidity during their deposition, samples coated by stacks of compact monolayers of Au-MPCs or decorated with individual, laterally separated Au-MPCs are obtained. DPV experiments with stacked monolayers of Au144-MPCs and EC-STS experiments with laterally separated individual Au144-MPCs are performed both in aqueous and ionic liquid electrolytes. Lower capacitance values were observed for individual clusters compared to ensemble clusters. This trend remains the same irrespective of the composition of the electrolyte surrounding the Au144-MPC. However, the resolution of the energy level spacing of the single clusters is strongly affected by the proximity of neighboring particles.Single gold particles may serve as room temperature single electron memory units because of their size dependent electronic level spacing. Here, we present a proof-of-concept study by electrochemically controlled scanning probe experiments performed on tailor-made Au particles of narrow dispersity. In particular, the charge transport characteristics through chemically synthesized hexane-1-thiol and 4-pyridylbenzene-1-thiol mixed monolayer protected Au144 clusters (MPCs) by differential pulse voltammetry (DPV) and electrochemical scanning tunneling spectroscopy (EC-STS) are reported. The pyridyl groups

Thermal conductivity of graphene mediated by strain and size

International Nuclear Information System (INIS)

Kuang, Youdi; Shi, Sanqiang; Wang, Xinjiang

2016-01-01

Based on first-principles calculations and full iterative solution of the linearized Boltzmann–Peierls transport equation for phonons, we systematically investigate effects of strain, size and temperature on the thermal conductivity k of suspended graphene. The calculated size-dependent and temperature-dependent k for finite samples agree well with experimental data. The results show that, contrast to the convergent room-temperature k = 5450 W/m-K of unstrained graphene at a sample size ~8 cm, k of strained graphene diverges with increasing the sample size even at high temperature. Out-of-plane acoustic phonons are responsible for the significant size effect in unstrained and strained graphene due to their ultralong mean free path and acoustic phonons with wavelength smaller than 10 nm contribute 80% to the intrinsic room temperature k of unstrained graphene. Tensile strain hardens the flexural modes and increases their lifetimes, causing interesting dependence of k on sample size and strain due to the competition between boundary scattering and intrinsic phonon–phonon scattering. k of graphene can be tuned within a large range by strain for the size larger than 500 μm. These findings shed light on the nature of thermal transport in two-dimensional materials and may guide predicting and engineering k of graphene by varying strain and size

Antimicrobial activities of the Streptomyces ceolicolor strain AOB KF977550 isolated from a tropical estuary

Directory of Open Access Journals (Sweden)

Bamidele T. Odumosu

2017-11-01

Full Text Available The aim of this study was to screen for important antibiotic producing species of the genus Streptomyces from a tropical estuary. Five bacterial strains were isolated from the Lagos lagoon and identified by 16S rDNA gene sequencing as Streptomyces albogriseolus, S. aureus, S. coelicolor, S. albus, and S. pseudogriseolus. Ethyl acetate extracts of Streptomyces spp. fermented broths were evaluated against laboratory strains of MRSA Methicillin-resistant Staphyloccus aureus (MRSA 144 m, Bacillus coagulans UL001, and Escherichia coli as well as the standard strains Klebsiella pneumonia ATCC 8308, Gardnerella vaginalis ATCC 27853 and Salmonella typhi ATCC 13311 using the well diffusion method. The presence of secondary metabolites was determined and analysed using gas chromatography-mass spectrometry (GC-MS. A broad spectrum of activity was only observed for S. coelicolor on all of the tested bacteria except S. typhi, ant GC-MS analysis revealed the presence of 16 secondary metabolites with relevant antibiotic properties. The result of this study suggest that Lagos Lagoon is a potential source and reservoir of novel antibiotics. Keywords: Streptomyces, Antibiotics, Resistance, Secondary Metabolites

Transformation of Au144(SCH2CH2Ph)60 to Au133(SPh-tBu)52 Nanomolecules: Theoretical and Experimental Study.

Science.gov (United States)

Nimmala, Praneeth Reddy; Theivendran, Shevanuja; Barcaro, Giovanni; Sementa, Luca; Kumara, Chanaka; Jupally, Vijay Reddy; Apra, Edoardo; Stener, Mauro; Fortunelli, Alessandro; Dass, Amala

2015-06-04

Ultrastable gold nanomolecule Au144(SCH2CH2Ph)60 upon etching with excess tert-butylbenzenethiol undergoes a core-size conversion and compositional change to form an entirely new core of Au133(SPh-tBu)52. This conversion was studied using high-resolution electrospray mass spectrometry which shows that the core size conversion is initiated after 22 ligand exchanges, suggesting a relatively high stability of the Au144(SCH2CH2Ph)38(SPh-tBu)22 intermediate. The Au144 → Au133 core size conversion is surprisingly different from the Au144 → Au99 core conversion reported in the case of thiophenol, -SPh. Theoretical analysis and ab initio molecular dynamics simulations show that rigid p-tBu groups play a crucial role by reducing the cluster structural freedom, and protecting the cluster from adsorption of exogenous and reactive species, thus rationalizing the kinetic factors that stabilize the Au133 core size. This 144-atom to 133-atom nanomolecule's compositional change is reflected in optical spectroscopy and electrochemistry.

Structure, interface abruptness and strain relaxation in self-assisted grown InAs/GaAs nanowires

Energy Technology Data Exchange (ETDEWEB)

Frigeri, Cesare, E-mail: frigeri@imem.cnr.it [CNR-IMEM Institute, Parma (Italy); Scarpellini, David [L–NESS and Dept. Materials Science, University of Milano Bicocca, Milano (Italy); Department of Industrial Engineering University of Rome Tor Vergata, Rome (Italy); Fedorov, Alexey [LNESS and CNR-IFN, Como (Italy); Bietti, Sergio; Somaschini, Claudio [L–NESS and Dept. Materials Science, University of Milano Bicocca, Milano (Italy); Grillo, Vincenzo [CNR-IMEM Institute, Parma (Italy); CNR-S3-NANO Center, Modena (Italy); Esposito, Luca; Salvalaglio, Marco; Marzegalli, Anna; Montalenti, Francesco [L–NESS and Dept. Materials Science, University of Milano Bicocca, Milano (Italy); Sanguinetti, Stefano [L–NESS and Dept. Materials Science, University of Milano Bicocca, Milano (Italy); LNESS and CNR-IFN, Como (Italy)

2017-02-15

Highlights: • We study 2 critical issues (interface abruptness and strain release) in InAs/GaAs NWs. • Structural and chemical interface sharpness ≤1.5 nm, better than in previous reports. • Simultaneous elastic and plastic relaxation is shown that agrees with FEM simulations. • Structural, chemical and strain release investigations were performed by STEM. • New MBE self-seeded method whereby InAs is grown by splitting In and As depositions. - Abstract: The structure, interface abruptness and strain relaxation in InAs/GaAs nanowires grown by molecular beam epitaxy in the Ga self-catalysed mode on (111) Si have been investigated by transmission electron microscopy. The nanowires had the zincblende phase. The InAs/GaAs interface was atomically and chemically sharp with a width around 1.5 nm, i.e. significantly smaller than previously reported values. This was achieved by the consumption of the Ga droplet and formation of a flat top facet of the GaAs followed by the growth of InAs by splitting the depositions of In and As. Both elastic and plastic strain relaxation took place simultaneously. Experimental TEM results about strain relaxation very well agree with linear elasticity theory calculations by the finite element methods.

Structure, interface abruptness and strain relaxation in self-assisted grown InAs/GaAs nanowires

International Nuclear Information System (INIS)

Frigeri, Cesare; Scarpellini, David; Fedorov, Alexey; Bietti, Sergio; Somaschini, Claudio; Grillo, Vincenzo; Esposito, Luca; Salvalaglio, Marco; Marzegalli, Anna; Montalenti, Francesco; Sanguinetti, Stefano

2017-01-01

Highlights: • We study 2 critical issues (interface abruptness and strain release) in InAs/GaAs NWs. • Structural and chemical interface sharpness ≤1.5 nm, better than in previous reports. • Simultaneous elastic and plastic relaxation is shown that agrees with FEM simulations. • Structural, chemical and strain release investigations were performed by STEM. • New MBE self-seeded method whereby InAs is grown by splitting In and As depositions. - Abstract: The structure, interface abruptness and strain relaxation in InAs/GaAs nanowires grown by molecular beam epitaxy in the Ga self-catalysed mode on (111) Si have been investigated by transmission electron microscopy. The nanowires had the zincblende phase. The InAs/GaAs interface was atomically and chemically sharp with a width around 1.5 nm, i.e. significantly smaller than previously reported values. This was achieved by the consumption of the Ga droplet and formation of a flat top facet of the GaAs followed by the growth of InAs by splitting the depositions of In and As. Both elastic and plastic strain relaxation took place simultaneously. Experimental TEM results about strain relaxation very well agree with linear elasticity theory calculations by the finite element methods.

Strain effects on the optical parameters of quantum dots nanocrystals employed in biomedical applications

International Nuclear Information System (INIS)

Liaparinos, P.F.

2014-01-01

The purpose of this study was to perform the influence of the strain (lattice and radius) effects on the optical parameters of nanocrystals for use in medical imaging instrumentation technology. The present manuscript involved (a) quantum dots (QD) based nanophosphors with particle size 3–5 nm in diameter, (b) dielectric constants (core) of nanophosphors in the range 2–4, and (c) the whole portion of the electromagnetic spectrum visible to the human eye, 400–700 nm. Lattice strain effects on the optical properties were evaluated by the modification of the bulk dielectric function using a Drude–Sommerfeld model for the free or conduction electrons, and a core term representing the bound electrons. The Mie scattering theory, was used to predict the shifted optical parameters. Results showed that (i) lattice stain reduces the real part (n) of refractive index, (ii) the reduction of n becomes higher with the increase of ε core (ω) and (iii) no significant variations on n were observed under the variability of incident light wavelength (400–700 nm). Light wavelength was found to affect significantly the imaginary part (k) of the complex refractive index. In addition, the radius strain (i) decreases the light extinction coefficient, m ext , (ii) increases the anisotropy factor, g and (iii) increases the light absorption probability, p. However, in cases of ε core (ω)=2, radius strain of 5% seems to present slightly higher p values than the cases of radius strain 10%. The present investigation found that the modification on the optical parameters enhances the utilization of quantom-dots luminescent nanomaterial in optical diffusion studies with requirements of high sensitivity (such as nuclear medical imaging modalities) rather than of high light spatial resolution (such as X-ray projection medical imaging systems). -- Highlights: • The strain effects on the optical parameters of quantum dots were examined. • Light wavelength affects significantly the

Size effects in PbTiO3 nanocrystals: Effect of particle size on spontaneous polarization and strains

Science.gov (United States)

Akdogan, E. K.; Rawn, C. J.; Porter, W. D.; Payzant, E. A.; Safari, A.

2005-04-01

The spontaneous polarization (Ps) and spontaneous strains (xi) in mechanically unclamped and surface charge compensated PbTiO3 nanocrystals were determined as a function of particle size in the range <150nm by differential scanning calorimetry and x-ray powder diffraction, respectively. Significant deviations from bulk order parameters (P,xi) have been observed as the particle size decreased below ˜100nm. The critical size (rc) below which the ferroelectric tetragonal phase transforms to the paraelectric cubic phase was determined as ˜15nm. The depression in transition temperature with particle size is 14 °C at 28 nm. No change in the order of m3m →4mm ferrodistortive phase transition is observed. A simple analysis showed that ΔHtr/(kBT )˜103 at 25 °C for r =16nm, indicating that the stabilization of the cubic phase at rc cannot be linked to an instability in dipolar ordering due to thermal agitations. Comparison of the spontaneous volumetric strains with the strain induced by surface stress indicated that the effect of surface stress on ferroelectric phase stability was negligible. Anomalies in electrostrictive properties were determined for r →rc. The observed size dependence of PS is attributed to the reduced extent of long-range dipole-dipole interactions that arise due to the changes in bonding characteristics of ions with decreasing particle size in the perovskite lattice, in conformity with a recent study by Tsunekawa et al. [Phys. Rev. Lett. 85 (16), 4340 (2000)].

Post-UV colony-forming ability of normal fibroblast strains and of the xeroderma pigmentosum group G strain

International Nuclear Information System (INIS)

Barrett, S.F.; Tarone, R.E.; Moshell, A.N.; Ganges, M.B.; Robbins, J.H.

1981-01-01

In xeroderma pigmentosum, an inherited disorder of defective DNA repair, post-uv colony-forming ability of fibroblasts from patients in complementation groups A through F correlates with the patients' neurological status. The first xeroderma pigmentosum patient assigned to the recently discovered group G had the neurological abnormalities of XP. Researchers have determined the post-uv colony-forming ability of cultured fibroblasts from this patient and from 5 more control donors. Log-phase fibroblasts were irradiated with 254 nm uv light from a germicidal lamp, trypsinized, and replated at known densities. After 2 to 4 weeks' incubation the cells were fixed, stained and scored for colony formation. The strains' post-uv colony-forming ability curves were obtained by plotting the log of the percent remaining post-uv colony-forming ability as a function of the uv dose. The post-uv colony-forming ability of 2 of the 5 new normal strains was in the previously defined control donor zone, but that of the other 3 extended down to the level of the most resistant xeroderma pigmentosum strain. The post-uv colony-forming ability curve of the group G fibroblasts was not significantly different from the curves of the group D fibroblast strains from patients with clinical histories similar to that of the group G patient

Effect of cerium 144 on the activity of liver monooxigenase system in rats treated in chronic experiment with phosphororganic substances

International Nuclear Information System (INIS)

Nechev, Kh.; Nankova, D.; Miteva, S.; Tsvetkov, Ts.; Shopova, V.

1982-01-01

Male rats Wistar breed were treated with insecticide Agria-1050 which contains methylnitrophos or thionphosphate (TP). The animals received treatment 5 days weekly during 4 months per os in a dose of 1/40 LD 50 (15 mg/kg b.w.). On the 20th day Ce 144 was introduced as CeCl 2 . The control group was composed of rats untreated with insecticide. On the 1st, 3rd, 8th and 15th day after application of Ce 144 the activities or cytochrom P-450 (P-450), amino-pyrine-N-demethylase (APD) and aniline liver microsome fraction. As a result of the chronic treatment with Agria 1050 a decrease chronic treatment with Agria 1050 a decrease is found in the content of P-450, ADP and AH. The study of the restoration of the liver monooxigenase system after a low activity of compensatory mechanisms. Ce 144 applied intratracheally caused changes, corresponding to a post-stress situation with their biphasic character, as well as with their amplitude: increased activity of P-450 and ADP on the first day, followed by a prolonged 144 and TP the radionuclide caused the character of the changes, whereas the insecticide only increased 4-5 times the amplitudes of these changes. The most pronounced was the increase of AH after the combined action of Ce 144 and TP. (authors)

Gene expression analysis of embryonic stem cells expressing VE-cadherin (CD144 during endothelial differentiation

Directory of Open Access Journals (Sweden)

Libermann Towia

2008-05-01

Full Text Available Abstract Background Endothelial differentiation occurs during normal vascular development in the developing embryo. This process is recapitulated in the adult when endothelial progenitor cells are generated in the bone marrow and can contribute to vascular repair or angiogenesis at sites of vascular injury or ischemia. The molecular mechanisms of endothelial differentiation remain incompletely understood. Novel approaches are needed to identify the factors that regulate endothelial differentiation. Methods Mouse embryonic stem (ES cells were used to further define the molecular mechanisms of endothelial differentiation. By flow cytometry a population of VEGF-R2 positive cells was identified as early as 2.5 days after differentiation of ES cells, and a subset of VEGF-R2+ cells, that were CD41 positive at 3.5 days. A separate population of VEGF-R2+ stem cells expressing the endothelial-specific marker CD144 (VE-cadherin was also identified at this same time point. Channels lined by VE-cadherin positive cells developed within the embryoid bodies (EBs formed by differentiating ES cells. VE-cadherin and CD41 expressing cells differentiate in close proximity to each other within the EBs, supporting the concept of a common origin for cells of hematopoietic and endothelial lineages. Results Microarray analysis of >45,000 transcripts was performed on RNA obtained from cells expressing VEGF-R2+, CD41+, and CD144+ and VEGF-R2-, CD41-, and CD144-. All microarray experiments were performed in duplicate using RNA obtained from independent experiments, for each subset of cells. Expression profiling confirmed the role of several genes involved in hematopoiesis, and identified several putative genes involved in endothelial differentiation. Conclusion The isolation of CD144+ cells during ES cell differentiation from embryoid bodies provides an excellent model system and method for identifying genes that are expressed during endothelial differentiation and that

24 CFR 1000.144 - Are Mutual Help homes developed under the 1937 Act subject to the useful life provisions of...

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Are Mutual Help homes developed under the 1937 Act subject to the useful life provisions of section 205(a)(2)? 1000.144 Section 1000.144 Housing and Urban Development Regulations Relating to Housing and Urban Development (Continued) OFFICE OF...

Fermentation of African kale (Brassica carinata) using L. plantarum BFE 5092 and L. fermentum BFE 6620 starter strains

DEFF Research Database (Denmark)

Oguntoyinbo, Folarin A; Cho, Gyu-Sung; Trierweiler, Bernhard

2016-01-01

Vegetables produced in Africa are sources of much needed micronutrients and fermentation is one way to enhance the shelf life of these perishable products. To prevent post-harvest losses and preserve African leafy vegetables, Lactobacillus plantarum BFE 5092 and Lactobacillus fermentum BFE 6620...... starter strains were investigated for their application in fermentation of African kale (Brassica carinata) leaves. They were inoculated at 1×10(7)cfu/ml and grew to a maximum level of 10(8)cfu/ml during 24h submerged fermentation. The strains utilized simple sugars (i.e., glucose, fructose, and sucrose......) in the kale to quickly reduce the pH from pH6.0 to pH3.6 within 24h. The strains continued to produce both d and l lactic acid up to 144h, reaching a maximum concentration of 4.0g/l. Fermentations with pathogens inoculated at 10(4)cfu/ml showed that the quick growth of the starters inhibited the growth...

Defects/strain influenced magnetic properties and inverse of surface spin canting effect in single domain CoFe_2O_4 nanoparticles

International Nuclear Information System (INIS)

Singh, Simrjit; Khare, Neeraj

2016-01-01

Graphical abstract: - Highlights: • Synthesized single domain CoFe_2O_4 nanoparticles with different amount of strain. • Demonstrated a correlation between size, strain and magnetic properties of CoFe_2O_4. • Strain induces cationic redistribution at tetrahedral and octahedral sites of CoFe_2O_4. • Inverse of spin canting effect due to the redistribution of Fe"3"+ ions is demonstrated. - Abstract: Single domain CoFe_2O_4 nanoparticles with different amount of defects/strain have been synthesized by varying the growth temperature in the hydrothermal method. Nanoparticles grown at lower temperature are of larger size and exhibit more planar defects and oxygen vacancies as compared to nanoparticles grown at higher temperatures which are of smaller sizes and exhibit less planar defects and oxygen vacancies. The nanoparticles with larger amount of defects also possess a higher value of intrinsic strain as compared to nanoparticles with fewer defects. The presence of intrinsic strain in the nanoparticles is found to shift the cationic distribution at the tetrahedral and octahedral sites. The saturation magnetization (M_s) of the nanoparticles is found to depend upon both the intrinsic strain and size of the nanoparticles. The M_s increases with the decrease in the nanoparticles size from 32 nm to 20 nm, and this is correlated to the inverse of spin canting effect due to decrease in the intrinsic strain which leads to shifting of Co"2"+ ions from tetrahedral to octahedral sites. However, with further decrease in the size of the nanoparticles (16 nm), the size effect dominates over the strain effect leading to decrease in M_s. The coercivity is found to be higher in the nanoparticles with larger amount of defects/strain and has been attributed to strain induced strong spin canting and pinning due to defect sites. The variation of coercivity with particle size (D) exhibits deviation from D"3"/"2 dependence for the nanoparticles with larger amount of strain/defects.

Passively mode-locked Nd:YVO4 laser operating at 1073 nm and 1085 nm

Science.gov (United States)

Waritanant, Tanant; Major, Arkady

2018-02-01

A passively mode-locked Nd:YVO4 laser operating at 1073 nm and 1085 nm was demonstrated with an intracavity birefringent filter as the wavelength selecting element. The average output powers achieved were 2.17 W and 2.18 W with optical-to-optical efficiency of 19.6% and 19.7%, respectively. The slope efficiencies were more than 31% at both output wavelengths. The pulse durations at the highest average output power were 10.3 ps and 8.4 ps, respectively. We believe that this is the first report of mode locking of a Nd:YVO4 laser operating at 1073 nm or 1085 nm lines.

Strain Balanced AlGaN/GaN/AlGaN nanomembrane HEMTs.

Science.gov (United States)

Chang, Tzu-Hsuan; Xiong, Kanglin; Park, Sung Hyun; Yuan, Ge; Ma, Zhenqiang; Han, Jung

2017-07-25

Single crystal semiconductor nanomembranes (NM) are important in various applications such as heterogeneous integration and flexible devices. This paper reports the fabrication of AlGaN/GaN NMs and NM high electron mobility transistors (HEMT). Electrochemical etching is used to slice off single-crystalline AlGaN/GaN layers while preserving their microstructural quality. A double heterostructure design with a symmetric strain profile is employed to ensure minimal residual strain in freestanding NMs after release. The mobility of the two-dimensional electron gas (2DEG), formed by the AlGaN/GaN heterostructure, is noticeably superior to previously reported values of many other NMs. AlGaN/GaN nanomembrane HEMTs are fabricated on SiO 2 and flexible polymeric substrates. Excellent electrical characteristics, including a high ON/OFF ratio and transconductance, suggest that III-Nitrides nanomembranes are capable of supporting high performance applications.

High Precision 142Nd/144Nd and 143Nd/144Nd Isotope Ratio Measurements in Rock Samples

Science.gov (United States)

Ali, A.; Srinivasan, G.

2009-05-01

were removed with a mixtures of HClO4 and HCl. Finally the digested samples were dissolved in 4N HCl prior to the column chromatography. The separation of alkalis and REE was achieved with 2 ml BioRad column using AG®50W-X12 resin; following which the separation of Nd and Sm fractions was achieved using Ln-Spec resin in PFA column. Results: Triple filament geometry was used to measure Nd as a metal in multi-dynamic mode using Isoprobe-T TIMS. About 600x10-9 g of JNdi-1 standard [6] produced a 142Nd beam strength of ~5×10-11 A; 400 cycles constituted one measurement, where each cycle consisted of 4 sequences of 10 second counting time. A set of ˜10 measurements of JNdi-1 gave extremely accurate and precise ratios for 142/144, 143/144 and 145/144 with internal precision better than 4 ppm and an external precision of less than 7 ppm in all cases. The BCR-2 samples were loaded ˜200 ng (factor of 4 less than JNdi-1) and therefore their operating signal strength for 142Nd was ˜1×10-11 A. Based on our analyses we conclude that the internal precision for BCR-2 samples in the range of 8-9 ppm and their external precision is comparable to JNdi-1. References: [1] Caro et al, (2008) Nature 452, 336-339; [2] Míková & Denková, (2007) Geosciences 52, 221-226; [3] Caro et al, (2003) Nature 432, 428-432; [4] Raczek et al., (2003) Geostandards Newsletter 27, No.2, 173-179; [5] O'Neil et al, (2008) Science 321, 1828-1831; [6] Tanaka et al., (2000) Chem Geol, 168, 279-281.

New developments in instrumentation for strain scanning in NPI Rez

CERN Document Server

Vrána, M; Lukás, P; Dubsky, J; Wagner, V

2000-01-01

Two high-resolution neutron diffractometers dedicated to strain /stress investigations in polycrystalline materials are routinely operated at the medium-power reactor LVR-15 in Rez and are also opened for external users. Good luminosity of the diffractometers and a sufficiently high-resolution (FWHM of the instrumental Delta d/d - profile can be less than 2*10/sup -3/ at d/sub hkl/=0.2 nm) permit investigations of both the macro- and microstrains in the sample gauge volumes of several cubic millimetres. Excellent properties and abilities of the neutron diffraction strain scanners are documented by some results of experimental measurements. (11 refs).

Design of Polymer Wavelength Splitter 1310 nm/1550 nm Based on Multimode Interferences

Directory of Open Access Journals (Sweden)

V. Prajzler

2010-12-01

Full Text Available We report about design of 1x2 1310/1550 nm optical wavelength division multiplexer based on polymer waveguides. The polymer splitter was designed by using RSoft software based on beam propagation method. Epoxy novolak resin polymer was used as core waveguides layer, silicon substrate with silica layer was used as buffer layer and polymethylmethacrylate was used as protection cover layer. The simulation shows that the output energy for the fundamental mode is 67.1 % for 1310 nm and 67.8 % for 1550 nm wavelength.

On the determination of representative stress–strain relation of metallic materials using instrumented indentation

International Nuclear Information System (INIS)

Fu, Kunkun; Chang, Li; Zheng, Bailin; Tang, Youhong; Wang, Hongjian

2015-01-01

Highlights: • A method to convert indentation load–depth curve into representative stress–strain curve is presented. • Representative stress–strain curves of six metals are obtained using finite element analysis. • Different representative strain definitions are compared using finite element method. • Representative stress–strain curve of molybdenum films is obtained by nanoindentation tests. - Abstract: In this study, attempts have been made to estimate the representative stress–strain relation of metallic materials from indentation tests using an iterative method. Finite element analysis was performed to validate the method. The results showed that representative stress–strain relations of metallic materials using the present method were in a good agreement with those from tensile tests. Further, this method was extended to predict representative stress–strain relation of ultra-thin molybdenum films with a thickness of 485 nm using nanoindentation. Yielding strength and strain hardening exponent of the films were therefore obtained, which showed a good agreement with the published data

Vibrational modes and strain in GaN/AlN quantum dot stacks: dependence on spacer thickness

Energy Technology Data Exchange (ETDEWEB)

Fresneda, J.; Cros, A.; Llorens, J.M.; Garcia-Cristobal, A.; Cantarero, A. [Institut de Ciencia del Materials, Universitat de Valencia, 46071 Valencia (Spain); Amstatt, B.; Bellet-Amalric, E.; Daudin, B. [CEA-CNRS Group, Nanophysique et Semiconducteurs, DRFMC/SP2M/PSC, CEA-Grenoble, 17 rue des Martyrs, 38054 Grenoble cedex 9 (France)

2007-06-15

We have investigated the influence of spacer thickness on the vibrational and strain characteristics of GaN/AlN quantum dot multilayers (QD). The Raman shift corresponding to the E{sub 2h} vibrational mode related to the QDs has been analyzed for AlN thicknesses ranging from 4.4 nm to 13 nm, while the amount of GaN deposited in each layer remained constant from sample to sample. It is shown that there is a rapid blue shift of the GaN vibrational mode with spacer thickness when its value is smaller than 7 nm while it remains almost constant for thicker spacers. A rapid increase of the Raman line-width in the thicker samples is also observed. The experimental behavior is discussed in comparison with the results of a theoretical model for the strain in the QDs. (copyright 2007 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Thermal behavior of Ni (99.967% and 99.5% purity) deformed to an ultra-high strain by high pressure torsion

DEFF Research Database (Denmark)

Zhang, H.W.; Huang, Xiaoxu; Pippan, R.

2010-01-01

Polycrystalline Ni of two purities (99.967% (4N) and 99.5% (2N)) was deformed to an ultra-high strain of εvM = 100 (εvM, von Mises strain) by high pressure torsion at room temperature. The 4N and 2N samples at this strain are nanostructured with an average boundary spacing of 100 nm, a high density...

Structure determination of K2ZnBr4 at 291 and 144 K

International Nuclear Information System (INIS)

Fabry, J.; Breczewski, T.; Zuniga, F.J.; Arnaiz, A.R.

1993-01-01

The room-temperature phase of K 2 ZnBr 4 is isomorphous with Sr 2 GeS 4 (P2 1 /m) while the low-temperature structure (P2 1 ) is slightly distorted [the phase transition occurs at 155 K]. Both structures contain highly deformed tetrahedral [ZnBr 4 ] 2- molecules with Br(3)-Zn-Br(3') angles of 103.06(5) and 102.49(9) at 291 and 144 K, respectively. This distortion is caused by the repulsion of Br atoms whose distance 3.712(1) and 3.661(2) A at 291 and 144 K, respectively, is below the Br-Br van der Waals distance (3.9 A). The phase transition is accompanied by minor shifts of cations and [ZnBr 4 ] 2- tetrahedra which are simultaneously rotated about a small angle. Below the phase transition point an inversion twin develops whose twin-fraction parameter was refined to 0.459(65). (orig.)

Strain release in metastable CdSe/CdS quantum dots

Energy Technology Data Exchange (ETDEWEB)

Gong, Ke; Beane, Gary; Kelley, David F., E-mail: dfkelley@ucmerced.edu

2016-06-01

Highlights: • We have synthesized CdSe/CdS core/shell quantum dots in the “stable” and “metastable” regimes. • Annealing of metastable particles causes lattice strain release, producing hole-trapping defects. • Electron microscopy imaging is relatively insensitive to defects that result in rapid radiationless decay. - Abstract: It has recently been shown (J. Phys. Chem. Lett., 2015, 6, 1559) that high quantum yields (QYs) in zincblende CdSe/CdS quantum dots can be achieved when the lattice strain energy density is in the stable (0–0.59 eV/nm{sup 2}) or metastable (0.59–0.85 eV/nm{sup 2}) regime. Annealing of metastable particles causes a dramatic reduction in the observed QY and a red shift of the absorbance and photoluminescence. In this work we demonstrate that the decline in QY upon annealing is due to the formation of hole traps. These traps, while dramatically affecting the observed QY, produce no significant changes in either morphology or crystallinity as determined by high resolution transmission electron microscopy (HRTEM).

Isolation and molecular identification of a UV-resistant strain of Dietzia maris and antioxidant activity of pigment

Directory of Open Access Journals (Sweden)

Narges Zamanian

2016-09-01

Full Text Available Introduction: The ability of radioresistant bacteria to survive high levels of UV radiation has been linked to their strong DNA repair systems and ability to produce primary and secondary metabolic products. The biosynthesis of pigments provides an opportunity for bacteria to live in radiation-rich environment. Recent radiation-responsive pigments are used commercially as food colorants, anticancer drugs, as well as antibiotics and for cosmetic purposes. Materials and methods: Soil sample of Omidiyeh city was collected during the spring of 2014 and UV-resistant strain was isolated after primary and secondary screening. Then it was identified by molecular methods (16S rRNA gene sequencing. Antioxidant activity of pigment was evaluated by 2,2 -diphenyl-1-picryl hydrazyl (DPPH and the reducing power of pigments were analyzed by ferric chloride. Results: In this present study, new UV-resistant strain NM2 was isolated and by comparison of these 16S rRNA gene sequences to public database using the BLAST, the genus and species of the isolate was identified as Dietzia maris with 99% similarity. Extraction of pigment from isolated strain was carried out by methanol and acetone as solvents. The spectrum is characterized by maximum peak at 473 nm for pigment of NM2 strain. Antioxidant activity and the reducing ability of pigments increased by increasing their concentrations. NM2 strain pigment showed EC50 concentration of 3.30 mg/ml for DPPH free radical scavenging activity, and EC50 concentration of 28.46 µg/ml for reducing power. Discussion and conclusion: Isolation of natural resources of pigment is very important with high anti-oxidant activity. In the current study, pigment of UV-resistant bacteria demonstrated a strong antioxidant activity in vitro and pigment of these bacteria could play an important role in UV tolerance. Pigment of UV-resistant bacteria may be an appropriate source for antioxidative-related functional foods and the pharmaceutical

Glucocorticoids can affect Pseudomonas aeruginosa (ATCC 27853) internalization and intracellular calcium concentration in cystic fibrosis bronchial epithelial cells.

Science.gov (United States)

Hussain, Rashida; Shahror, Rami; Karpati, Ferenc; Roomans, Godfried M

2015-01-01

Glucocorticoids (GCs) are anti-inflammatory agents, but their use in cystic fibrosis (CF) is controversial. In CF, the early colonization with Pseudomonas aeruginosa is mainly due to nonmucoid strains that can internalize, and induce apoptosis in the epithelial cells. Uptake of P. aeruginosa by the epithelial cells and subsequent apoptosis may prevent colonization of P. aeruginosa in CF airways. In the airway epithelia, several other biological effects, including an anti-secretory role by decreasing intracellular Ca(2+) concentration have been described for this anti-inflammatory drug. However, the effects of GCs on the nonmucoid P. aeruginosa internalization and intracellular Ca(2+) in CF bronchial epithelial cells have not been evaluated. We used cultured human CF bronchial airway epithelial cell (CFBE) monolayers to determine P. aeruginosa internalization, apoptosis, and intracellular Ca(2+)concentration in CF bronchial epithelial cells. Cells were treated with IL-6, IL-8, dexamethasone, betamethasone, or budesonide. GCs in co-treatments with IL-6 reversed the effect of IL-6 by decreasing the internalization of P. aeruginosa in the CFBE cells. GCs decreased the extent of apoptosis in CFBE cells infected with internalized P. aeruginosa, and increased the intracellular Ca(2+) concentration. These findings suggest that if internalization of P. aeruginosa reduces infection, GC therapy would increase the risk of pulmonary infection by decreasing the internalization of P. aeruginosa in CF cells, but GCs may improve airway hydration by increasing the intracellular Ca(2+) concentration. Whether the benefits of GC treatment outweigh the negative effects is questionable, and further clinical studies need to be carried out.

Strain-activated edge reconstruction of graphene nanoribbons

KAUST Repository

Cheng, Yingchun

2012-02-17

The edge structure and width of graphene nanoribbons (GNRs) are crucial factors for the electronic properties. A combination of experiment and first-principles calculations allows us to determine the mechanism of the hexagon-hexagon to pentagon-heptagon transformation. GNRs thinner than 2 nm have been fabricated by bombardment of graphene with high-energetic Au clusters. The edges of the GNRs are modified in situ by electron irradiation. Tensile strain along the edge decreases the transformation energy barrier. Antiferromagnetism and a direct band gap are found for a zigzag GNR, while a fully reconstructed GNR shows an indirect band gap. A GNR reconstructed on only one edge exhibits ferromagnetism. We propose that strain is an effective method to tune the edge and, therefore, the electronic structure of thin GNRs for graphene-based electronics.

Strain-activated edge reconstruction of graphene nanoribbons

KAUST Repository

Cheng, Yingchun; Han, Yu; Schwingenschlö gl, Udo; Wang, H. T.; Zhang, Xixiang; Zhu, Y. H.; Zhu, Zhiyong

2012-01-01

The edge structure and width of graphene nanoribbons (GNRs) are crucial factors for the electronic properties. A combination of experiment and first-principles calculations allows us to determine the mechanism of the hexagon-hexagon to pentagon-heptagon transformation. GNRs thinner than 2 nm have been fabricated by bombardment of graphene with high-energetic Au clusters. The edges of the GNRs are modified in situ by electron irradiation. Tensile strain along the edge decreases the transformation energy barrier. Antiferromagnetism and a direct band gap are found for a zigzag GNR, while a fully reconstructed GNR shows an indirect band gap. A GNR reconstructed on only one edge exhibits ferromagnetism. We propose that strain is an effective method to tune the edge and, therefore, the electronic structure of thin GNRs for graphene-based electronics.

CeLAND: search for a 4th light neutrino state with a 3 PBq ¹⁴⁴Ce-¹⁴⁴Pr electron antineutrino generator in KamLAND

Energy Technology Data Exchange (ETDEWEB)

Gando, A; Gando, Y; Hayashida, S; Ikeda, H; Inoue, K; Ishidoshiro, K; Ishikawa, H; Koga, M; Matsuda, R; Matsuda, S; Mitsui, T; Motoki, D; Nakamura, K; Oki, Y; Otani, M; Shimizu, I; Shirai, J; Suekane, F; Suzuki, A; Takemoto, Y; Tamae, K; Ueshima, K; Watanabe, H; Xu, BD; Yamada, S; Yamauchi, Y; Yoshida, H; Cribier, M; Durero, M; Fischer, V; Gaffiot, J; Jonqueres, N; Kouchner, A; Lasserre, T; Leterme, D; Letourneau, A; Lhuillier, D; Mention, G; Rampal, G; Scola, L; Veyssiere, C; Vivier, M; Yala, P; Berger, BE; Kozlov, A; Banks, T; Dwyer, D; Fujikawa, BK; Han, K; Kolomensky, YG; Mei, Y; O' Donnell, T; Decowski, P; Markoff, DM; Yoshida, S; Kornoukhov, VN; Gelis, TVM; Tikhomirov, GV; Learned, JG; Maricic, J; Matsuno, S; Milincic, R; Karwowski, HJ; Efremenko, Y; Detwiler, A; Enomoto, S

2017-05-12

The reactor neutrino and gallium anomalies can be tested with a 3-4 PBq (75-100 kCi scale) ¹⁴⁴Ce-¹⁴⁴Pr antineutrino beta-source deployed at the center or next to a large low-background liquid scintillator detector. The antineutrino generator will be produced by the Russian reprocessing plant PA Mayak as early as 2014, transported to Japan, and deployed in the Kamioka Liquid Scintillator Anti-Neutrino Detector (KamLAND) as early as 2015. KamLAND's 13 m diameter target volume provides a suitable environment to measure the energy and position dependence of the detected neutrino flux. A characteristic oscillation pattern would be visible for a baseline of about 10 m or less, providing a very clean signal of neutrino disappearance into a yet-unknown, sterile neutrino state. This will provide a comprehensive test of the electron dissaperance neutrino anomalies and could lead to the discovery of a 4th neutrino state for Δm$2\\atop{new}$ ≳ 0.1 eV² and sin²(2θ_new) > 0.05.

Reduction of Mo(VI) by the bacterium Serratia sp. strain DRY5.

Science.gov (United States)

Rahman, M F A; Shukor, M Y; Suhaili, Z; Mustafa, S; Shamaan, N A; Syed, M A

2009-01-01

The need to isolate efficient heavy metal reducers for cost effective bioremediation strategy have resulted in the isolation of a potent molybdenum-reducing bacterium. The isolate was tentatively identified as Serratia sp. strain DRY5 based on the Biolog GN carbon utilization profiles and partial 16S rDNA molecular phylogeny. Strain DRY5 produced 2.3 times the amount of Mo-blue than S. marcescens strain Dr.Y6, 23 times more than E. coli K12 and 7 times more than E. cloacae strain 48. Strain DRY5 required 37 degrees C and pH 7.0 for optimum molybdenum reduction. Carbon sources such as sucrose, maltose, glucose and glycerol, supported cellular growth and molybdate reduction after 24 hr of static incubation. The most optimum carbon source that supported reduction was sucrose at 1.0% (w/v). Ammonium sulphate, ammonium chloride, glutamic acid, cysteine, and valine supported growth and molybdate reduction with ammonium sulphate as the optimum nitrogen source at 0. 2% (w/v). Molybdate reduction was optimally supported by 30 mM molybdate. The optimum concentration of phosphate for molybdate reduction was 5 mM when molybdate concentration was fixed at 30 mM and molybdate reduction was totally inhibited at 100 mM phosphate. Mo-blue produced by this strain shows a unique characteristic absorption profile with a maximum peak at 865 nm and a shoulder at 700 nm, Dialysis tubing experiment showed that 95.42% of Mo-blue was found in the dialysis tubing suggesting that the molybdate reduction seen in this bacterium was catalyzed by enzyme(s). The characteristics of isolate DRY5 suggest that it would be useful in the bioremediation ofmolybdenum-containing waste.

Antimicrobial drug susceptibility of Neisseria meningitidis strains isolated from carriers

Directory of Open Access Journals (Sweden)

Dayamí García

2000-06-01

Full Text Available When it is necessary to determine the susceptibility of Neisseria meningitidis (Nm strains to antimicrobial drugs, it is important to consider that it should be analyzed in a double context. One of them related to the use of drugs in a specific medical treatment; and the other; to chemoprophylatic drugs, both with the same purpose: the accurate selection of the “in vivo” antimicrobial agent. This requires the study of the sensitivity and resistance of strains isolated in both carriers and patients. With the aim of further studying the behavior of the strains that currently circulate in Cuba, an antimicrobial drug susceptibility study was conducted in 90 strains isolated from carriers during the first half of 1998. The agar dilution method was used to determine the minimum inhibitory concentrations (MICs to: penicillin, ampicillin, rifampin, sulfadiazine, chloramphenicol, ciprofloxacin, ceftriaxone, cefotaxime. The study of the three latter drugs was done for the first time in our country. The search for β- lactamase-producer strains was also performed. There was a predominance of penicillin sensitive strains (82,2% with an intermediate sensitivity to ampicillin (57,8%, while 70% of the strains were sensitive to sulfadiazine. Regarding the rest of the antimicrobial drugs, 100% of the strains were sensitive. The paper shows the MICs for each drug as well as the phenotypic characteristics of the strains with the penicillin and sulfadiazine sensitivity and resistance patterns. No β-lactamase-producer strains were found.

The sequential separation of strontium-90, yttrium-90, promethium-147, and cerium-144 from urine and their subsequent estimation

International Nuclear Information System (INIS)

Kramer, G.H.; Davies, J.M.

1981-04-01

A method has been developed for separating low-level activities of the beta-emitting isotopes strontium-90, yttrium-90, promethium-147 and cerium-144 from urine and aqueous solutions. They are subsequently estimated by planchet or liquid scintillation counting. The radionuclides are separated from each other and from interfering elements by solvent extraction with HDEHP (di-2-ethylhexyl phosphoric acid) in n-heptane. It is possible to separate the elements with a minimum of cross-contamination by selecting appropriate pH's and solvent concentrations. Percentage recoveries for the radionuclides are: 90 Sr, 100 +- 12; 90 Y, 65 +- 4; 147 Pm, 90 +- 8; 144 Ce, 87 +- 11. The limits of detection are: 90 Sr, 0.6 pCi; 90 Y, 0.7 pCi; 147 Pm, 1.0 pCi; 144 Ce, 0.8 pCi. (author)

Effect of CuO Nanoparticles over Isolated Bacterial Strains from Agricultural Soil

International Nuclear Information System (INIS)

Concha-Guerrero, S.I.; Pinon-Castillo, H.A.; Luna-Velasco, A.; Orrantia-Borunda, E.; Brito, E.M.S.; Tarango-Rivero, S.H.; Caretta, C.A.; Duran, R.

2014-01-01

The increased use of the nanoparticles (NPs) on several processes is notorious. In contrast the eco toxicological effects of NPs have been scarcely studied. The main current researches are related to the oxide metallic NPs. In the present work, fifty-six bacterial strains were isolated from soil, comprising 17 different OTUs distributed into 3 classes: Bacilli (36 strains), Flavobacteria (2 strains), and Gamma proteobacteria (18 strains). Copper oxide nanoparticles (CuONPs) were synthesized using a process of chemical precipitation. The obtained CuONPs have a spherical shape and primary size less than 17 nm. Twenty-one strains were used to evaluate the cytotoxicity of CuONPs and 11 of these strains showed high sensibility. Among those 11 strains, 4 (Brevibacillus later osporus strain CSS8, Chryseobacterium indoltheticum strain CSA28, and Pantoea ananatis strains CSA34 and CSA35) were selected to determine the kind of damage produced. The CuONPs toxic effect was observed at expositions over 25 mg·L -1 and the damage to cell membrane above 160 mg·L -1 . The electron microscopy showed the formation of cavities, holes, membrane degradation, blebs, cellular collapse, and lysis. These toxic effects may probably be due to the ions interaction, the oxide-reduction reactions, and the generation of reactive species

Resistance gene pool to co-trimoxazole in non-susceptible Nocardia strains.

Directory of Open Access Journals (Sweden)

Sylvia eValdezate

2015-04-01

Full Text Available The soil-borne pathogen Nocardia spp. causes severe cutaneous, pulmonary and central nervous system infections. Against them, co-trimoxazole (SXT constitutes the mainstay of antimicrobial therapy. However, some Nocardia strains show resistance to SXT, but the underlying genetic basis is unknown. We investigated the presence of genetic resistance determinants and class 1-3 integrons in 76 SXT-resistant Nocardia strains by PCR and sequencing. By E-test, these clinical strains showed SXT MICs of ≥32:608 mg/L (ratio of 1:19 for trimethoprim: sulfamethoxazole. They belonged to 12 species, being the main representatives N. farcinica (32%, followed by N. flavorosea (6.5%, N. nova (11.8%, N. carnea (10.5%, N. transvalensis (10.5% and Nocardia spp. (6.5%. The prevalence of resistance genes in the SXT-resistant strains was as follows: sul1 and sul2 93.4% and 78.9% respectively, dfrA(S1 14.7%, blaTEM-1 and blaZ 2.6% and 2.6% respectively, VIM-2 1.3%, aph(3´-IIIa 40.8%, ermA, ermB, mefA and msrD 2.6%, 77.6%, 14.4%, and 5.2% respectively, and tet(O, tet(M, and tet(L 48.6%, 25.0% and 3.9% respectively. Detected amino acid changes in GyrA were not related to fluoroquinolone resistance, but probably linked to species polymorphism. Class 1 and 3 integrons were found in 93.42% and 56.57% strains, respectively. Class 2 integrons and sul3 genes were not detected. Other mechanisms, different than dfrA(S1, dfrD, dfrF, dfrG and dfrK, could explain the strong trimethoprim resistance shown by the other 64 strains. For first time, resistance determinants commonly found in clinically important bacteria were detected in Nocardia spp. sul1, sul2, erm(B and tet(O were the most prevalent in the SXT-resistant strains. The similarity in their resistome could be due to a common genetic platform, in which these determinants are co-transferred

Sr-90, Cs-137 and Ce-144 in commercial tea from several areas in China

International Nuclear Information System (INIS)

Sha Lianmao; Qiu Yundian; Wang Zhihui; Wang Fenghua

1993-01-01

18 kinds of tea, most of which are famous products, were collected in 1985 from 10 provinces of China. More than 1 kg of manufactured tea was collected from each sampling location and ashed in a stainless steel pan by a rapid ashing apparatus made in China Institute for Radiation Protection. A 10 g aliquot of the ashed sample was subjected to radiochemical analysis for 90 Sr. 117 Cs and 144 Ce. Strontium, Cesium and Cerium carriers were added to the samples. The chemical yield of Sr, Cs and Ce were determined by weighting. After the radiochemical separation the mounted precipitates were counted for activity using a thin window methane gas-flow proportional counter normally for 100 min. Statistical error due to counting in generally was 90 Sr, 2.2 +- 0.9 Bq/kg for 137 Cs and 0.8 +- 0.2 Bq/kg for 144 Ce. Among these data, the content of 144 Ce in each tea sample is the lowest for its shorter lift. Higher values of 90 Sr concentration occurred in each tea sample than that of 137 Cs. This seems to be due to the fact that 137 Cs is tightly bound by soil than 90 Sr and the extent to which 90 Sr is absorbed from the soil by plants is greater than 137 Cs. (2 figs., 1 tab.)

Identification and expression analysis of miR-144-5p and miR-130b-5p in dairy cattle

Directory of Open Access Journals (Sweden)

Z. Li

2017-07-01

Full Text Available MicroRNAs (miRNAs can coordinate the main pathways involved in innate and adaptive immune responses by regulating gene expression. To explore the resistance to mastitis in cows, miR-144-5p and miR-130b-5p were identified in bovine mammary gland tissue and 14 potential target genes belonging to the chemokine signaling pathway, the arginine and proline metabolism pathway and the mRNA surveillance pathway were predicted. Subsequently, we estimated the relative expression of miR-144-5p and miR-130b-5p in cow mammary tissues by using stem-loop quantitative real-time polymerase chain reaction. The results showed that the relative expression of miR-144-5p and miR-130b-5p in the mastitis-infected mammary tissues (n = 5 was significantly downregulated 0.14-fold (p < 0. 01 and upregulated 3.34-fold (p < 0. 01, respectively, compared to healthy tissues (n = 5. Our findings reveal that miR-144-5p and miR-130b-5p may have important roles in resistance to mastitis in dairy cattle.

In silico comparative study of epitopes predicted from different strains of genus parvovirus.

OpenAIRE

Rahul B. Chamute; Mahadev A. Jadhav; Anant Patil

2011-01-01

Parvoviruses are typically linear, non-segmented single-stranded DNA viruses, with an average genome size of 5000 nucleotides. Parvoviruses are some of the smallest viruses found in nature. Some have been found as small as 23 nm. Many types of mammalian species have a strain of parvovirus associated with them. Parvoviruses tend to be specific about the taxon of animal they will infect, but this is a somewhat flexible characteristic. Thus, all strains of parvovirus will affect dogs, wolves, an...

Strain-tuned optoelectronic properties of hollow gallium sulphide microspheres

Science.gov (United States)

Zhang, Yin; Chen, Chen; Liang, C. Y.; Liu, Z. W.; Li, Y. S.; Che, Renchao

2015-10-01

Sulfide semiconductors have attracted considerable attention. The main challenge is to prepare materials with a designable morphology, a controllable band structure and optoelectronic properties. Herein, we report a facile chemical transportation reaction for the synthesis of Ga2S3 microspheres with novel hollow morphologies and partially filled volumes. Even without any extrinsic dopant, photoluminescence (PL) emission wavelength could be facilely tuned from 635 to 665 nm, depending on its intrinsic inhomogeneous strain distribution. Geometric phase analysis (GPA) based on high-resolution transmission electron microscopy (HRTEM) imaging reveals that the strain distribution and the associated PL properties can be accurately controlled by changing the growth temperature gradient, which depends on the distance between the boats used for raw material evaporation and microsphere deposition. The stacking-fault density, lattice distortion degree and strain distribution at the shell interfacial region of the Ga2S3 microspheres could be readily adjusted. Ab initio first-principles calculations confirm that the lowest conductive band (LCB) is dominated by S-3s and Ga-4p states, which shift to the low-energy band as a result of the introduction of tensile strain, well in accordance with the observed PL evolution. Therefore, based on our strain driving strategy, novel guidelines toward the reasonable design of sulfide semiconductors with tunable photoluminescence properties are proposed.Sulfide semiconductors have attracted considerable attention. The main challenge is to prepare materials with a designable morphology, a controllable band structure and optoelectronic properties. Herein, we report a facile chemical transportation reaction for the synthesis of Ga2S3 microspheres with novel hollow morphologies and partially filled volumes. Even without any extrinsic dopant, photoluminescence (PL) emission wavelength could be facilely tuned from 635 to 665 nm, depending on its

Biological effects of repeated exposure of beagle dogs to relatively insoluble aerosols of 144Ce. IV

International Nuclear Information System (INIS)

Boecker, B.B.; Hahn, F.F.; Hanika-Rebar, C.; McClellan, R.O.; Mauderly, J.L.; Pickrell, J.A.

1977-01-01

This experiment is being conducted to study the behavior and long-term biological effects in Beagle dogs of 144 Ce inhaled in fused aluminosilicate particles in repeated inhalation exposures for comparison with similar data from dogs that were exposed only once to a similar aerosol. Four groups of nine dogs each were exposed once every eight weeks for two years (13 exposures) to achieve specified exposure goals. The 144 Ce-exposed dogs received increasing or relatively constant beta radiation dose rates in contrast to the steadily decreasing dose rate seen after a single inhalation exposure. Exposures in the first and second groups were planned to yield a cumulative absorbed dose to lung of approximately equal to 35,000 rads and those in the third group approximately equal to 17,000 rads within two years after the first exposure. Singly exposed dogs that had died with pulmonary tumors when this experiment was initiated had cumulative doses to death of 29,000 to 61,000 rads. All 13 exposures have been completed. One dog in the 4.5-μCi 144 Ce/kg body weight group died at 771 days after first exposure with emaciation, adrenal cortical degeneration and bone marrow aplasia. One control dog died accidentally during anesthesia. During the past year, two additional dogs have died. One dog in the repeated 2.5-μCi 144 Ce/kg body weight group died at 1256 days after the first exposure with radiation pneumonitis and pulmonary fibrosis and a control dog died at 1052 days with autoimmune hemolytic anemia. The remaining 32 dogs appear to be in good physical condition except for a persistent lymphopenia at approximately equal to 4 years after the first exposure. They are being maintained for life span observations

Virulence factor genes possessing Enterococcus faecalis strains from rabbits and their sensitivity to enterocins

Directory of Open Access Journals (Sweden)

M. Pogány Simonová

2017-03-01

Full Text Available Information concerning the virulence factor genes and antibiotic resistance of rabbit enterococci is limited, so in this study we tested the virulence factor genes in Enterococcus faecalis strains from rabbits. Moreover, their resistance/sensitivity to antibiotics and sensitivity to enterocins was also tested, with the aim of contributing to our enterocin spectra study and to indicate the possibility of enterocin application in prevention or contaminant elimination in rabbit husbandry. A total of 144 rabbit samples were treated using a standard microbiological method. Thirty-one pure colonies of the species Enterococcus faecalis were identified, using the MALDI-TOF identification system and confirmed using phenotyping, among which 15 strains were virulence factor gene absent. The gelE gene was the most detected (42%; however, the expression of gelatinase phenotype did not always correlate with the detection of gelE. Strains did not show ß-haemolysis and were mostly resistant to tested antibiotics, but sensitive to enterocins (Ent, mainly to Ents EK13=A (P, 2019 and Ent M. Rabbit E. faecalis strains displayed antibiotic resistant traits and the presence of expressed and silent virulence genes, but they showed high levels of sensitivity to natural antimicrobials-enterocins, which indicates the possible prevention of multidrug and virulent enterococcal contaminants by enterocins.

Alveolar macrophage accumulation rates, for 28 nm and 250 nm PSL, are mediated by separate mechanisms

Energy Technology Data Exchange (ETDEWEB)

Moss, O R; Wong, V A, E-mail: moss@thehamner.or [Hamner Institutes for Health Sciences, Research Triangle Park, NC 27509-2137 (United States)

2009-02-01

When macrophages accumulate 28 nm and 250 nm diameter polystyrene latex (PSL) beads, the accumulation rates should reflect differences in molecular and cellular function. We used a confocal microscope to measure the accumulation rates of nanoparticles by F344-rat-alveolar macrophages (approx25,000 cells adhered to a 0.7 cm{sup 2} surface). Over the cells were layered 0.1 ml of media, and 0.1 ml of media-with-beads. Fresh cells were introduced for each exposure scenario. The maximum possible individual macrophage exposures were as follows: 8x10{sup 6}, 8x10{sup 5}, and 8x10{sup 4} 28 nm beads per macrophage; and 8x10{sup 4} and 1.12x10{sup 4} 250 nm beads per macrophage. Accumulation rates were estimated over 23 minutes. The increase in bead accumulation-rate matched changes in bead-availability: 7x increase for 250 nm beads; 100x increase for 28 nm beads; and 700x increase for all bead availabilities. The maximum sustained 28 nm bead accumulation rate was > 30,000 /min (for 5 min). Increases in bead accumulation could be explained by two mechanisms: bead-diffusion; and, for the macrophage, macropinocytosis. Also for the highest concentrations of 28 nm beads, we saw a colligative threshold - possibly due to beads masking the cell surface or obstructing cellular mechanisms.

Age-related effects on the disposition and dosimetry of inhaled 239Pu or 144Ce in immature or aged beagle dogs

International Nuclear Information System (INIS)

Guilmette, R.A.; Boecker, B.B.; Muggenburg, B.A.; Hahn, F.F.; McClellan, R.O.

1987-01-01

Immature (90 days of age), young adult (18 months of age), and aged (8-10.5 years of age) male and female beagle dogs received a single brief pernasal inhalation exposure to an aerosol of 144 Ce in an insoluble fused aluminosilicate matrix or 239 PuO 2 . These isotopes were selected to represent low- and high-LET emitters, respectively. No age-related differences in the retention of Pu in the lungs of dogs have been observed, nor have there been any detectable differences in the uptake and retention of Pu in the tracheobronchial lymph nodes. Age-related effects have been seen in the uptake of Pu in the skeleton, with the amount of Pu being greatest in the skeleton of immature dogs. For the dogs exposed to the 144 Ce aerosol, there was a statistically significant difference in the retention of 144 Ce in the lungs of immature dogs compared to young adults. Increased uptake of 144 Ce in the immature dog skeleton was also noted. 14 refs.; 4 figs

Comprehensive sieve analysis of breakthrough HIV-1 sequences in the RV144 vaccine efficacy trial.

Directory of Open Access Journals (Sweden)

Paul T Edlefsen

2015-02-01

Full Text Available The RV144 clinical trial showed the partial efficacy of a vaccine regimen with an estimated vaccine efficacy (VE of 31% for protecting low-risk Thai volunteers against acquisition of HIV-1. The impact of vaccine-induced immune responses can be investigated through sieve analysis of HIV-1 breakthrough infections (infected vaccine and placebo recipients. A V1/V2-targeted comparison of the genomes of HIV-1 breakthrough viruses identified two V2 amino acid sites that differed between the vaccine and placebo groups. Here we extended the V1/V2 analysis to the entire HIV-1 genome using an array of methods based on individual sites, k-mers and genes/proteins. We identified 56 amino acid sites or "signatures" and 119 k-mers that differed between the vaccine and placebo groups. Of those, 19 sites and 38 k-mers were located in the regions comprising the RV144 vaccine (Env-gp120, Gag, and Pro. The nine signature sites in Env-gp120 were significantly enriched for known antibody-associated sites (p = 0.0021. In particular, site 317 in the third variable loop (V3 overlapped with a hotspot of antibody recognition, and sites 369 and 424 were linked to CD4 binding site neutralization. The identified signature sites significantly covaried with other sites across the genome (mean = 32.1 more than did non-signature sites (mean = 0.9 (p < 0.0001, suggesting functional and/or structural relevance of the signature sites. Since signature sites were not preferentially restricted to the vaccine immunogens and because most of the associations were insignificant following correction for multiple testing, we predict that few of the genetic differences are strongly linked to the RV144 vaccine-induced immune pressure. In addition to presenting results of the first complete-genome analysis of the breakthrough infections in the RV144 trial, this work describes a set of statistical methods and tools applicable to analysis of breakthrough infection genomes in general vaccine

The kinetics of oocyst shedding and sporulation in two immunologically distinct strains of Eimeria maxima, GS and M6.

Science.gov (United States)

Al-Badri, Riadh; Barta, John Robert

2012-11-01

The kinetics of oocyst shedding and sporulation of two immunologically distinct strains of Eimeria maxima (GS and M6) were compared. Both strains had a prepatent period of approximately 120 h followed by peak oocyst shedding at 144-150 h post inoculation. Mean total oocyst output determined for each strain demonstrated that the fecundity of the M6 strain (12.8 × 10(3) ± 1.95) of E. maxima was roughly twice that of the GS strain (6.9 × 10(3) ± 3.33) when inoculated at the rate of 1,000 infective oocysts per bird. The process of oocyst sporulation was followed by repetitive sampling of sporulating oocysts at 26 °C with aeration over a 138 hour period. Sporulation was divided into five morphologically distinguishable stages whose abundance peaked at the following times during sporulation: unsporulated oocysts at 0 h; sporoblast anlagen at 18 h; sporoblasts without sporocyst walls at 22 h; and sporocysts without mature sporozoites at 38 h. The time to 50 % sporulation of E. maxima oocysts observed in the present study was approximately 53 h for both strains and all viable oocysts had completed sporulation by 60 h. In the present study, the prepatent periods, duration of oocyst shedding, and the relative kinetics of sporulation of the GS and M6 strains of E. maxima were found to be virtually identical despite the immunological distinctiveness of these two parasite strains.

/sup 144/Ce in tissue of beagle dogs after inhalation of CeCl/sub 3/ with special emphasis on endocrine glands and reproductive organs

Energy Technology Data Exchange (ETDEWEB)

Cuddihy, R G; Boecker, B B; McClellan, R O; Kanapilly, G M [Lovelace Foundation for Medical Education and Research, Albuquerque, N.Mex. (USA)

1976-01-01

Beagle dogs inhaled aerosols containing /sup 144/CeCl/sub 3/. Deposition of /sup 144/Ce in tissues was determined in serially sacrificed dogs to characterize radiation dose patterns at early times after exposure. Uptakes of /sup 144/Ce in endocrine glands and reproductive organs were also measured; radiation doses were calculated and those doses were compared with the doses to the major organs of deposition - lung, liver and skeleton. Integrated radiation doses in pituitary and adrenal glands, pancreas, ovaries, testes, prostate and uterus were less than 2 % of those in lung and liver, while the thyroid dose was about 30 % of the dose in liver. These findings were consistent with previously reported biological responses in beagle dogs exposed to high levels of /sup 144/CeCl/sub 3/ wherein no radiation effects related to endocrine glands or the reproductive system have been observed. Use of these results in predicting the dosimetry of /sup 144/Ce in exposed humans re-emphasized the importance of radiation damage to lung, liver, skeleton and gastrointestinal tract compared to other organ systems.

Study on the IAA (Indole acetic acid) Productivity of Soil Yeast Strain Isolats

International Nuclear Information System (INIS)

Nwe Nwe Soe Hlaing; Swe Zin Yu; San San Yu

2011-12-01

Twelve isolated soil yeast were tested in IAA production in peptone yeast glucose broth (PYG). All strains were screened for the Indole Acetic Acid (IAA) producing activity in PYG broth supplemented with or without L-Tryptophan (L-TRP) as precusor. IAA production was assayed calorimetrically using Salkowski's reagent. The concentration of IAA produced by yeast strains was measured by spectrophotometric method at 530nm. Y6 strain was the highest IAA producer (79ppm) at 9 days incubation period without tryptophan. Y3, Y10 and Y12 strains that were incubated without L-TRP also had the higher ability in the production of IAA than other yeast isolates. The selected yeasts having high IAA production activity were characterized by morphological study and biochemical tests including sugar assimilation and fermentation tests.

Angular momentum distributions for 16O+144Nd

International Nuclear Information System (INIS)

Duchene, G.; Romain, P.; Beck, F.A.; Benet, P.; Disdier, D.; Haas, B.; Lott, B.; Rauch, V.; Scheibling, F.; Vivien, J.P.; Basu, S.K.; Bozek, E.; Zuber, K.; Di Gregorio, D.; Fernandez-Niello, J.

1993-01-01

Fusion cross sections have been measured for the system 16 O+ 144 Nd at bombarding energies in the range 67 MeV≤E lab ≤90 MeV by detecting directly evaporation residues in Si detectors and in the range 60 MeV≤E lab ≤75 MeV by off-line detection of the K x rays emitted by the radioactive evaporation residues and daughters. In order to obtain the spin distributions in the compound system gamma-ray multiplicity distributions for the most important neutron evaporation channels were also measured using a 4π BaF 2 array, in conjunction with Ge detectors. Results are compared with calculations based on models that consider fluctuations in barrier height due to ground-state zero-point vibrations as well as couplings to various inelastic and transfer channels

Effects of ginseng on Pseudomonas aeruginosa motility and biofilm formation

DEFF Research Database (Denmark)

Wu, Hong; Lee, Baoleri; Yang, Liang

2011-01-01

protected animal models from developing chronic lung infection by P. aeruginosa. In the present study, the effects of ginseng on the formation of P. aeruginosa biofilms were further investigated in vitro and in vivo. Ginseng aqueous extract at concentrations of 0.5-2.0% did not inhibit the growth of P......Biofilm-associated chronic Pseudomonas aeruginosa lung infections in patients with cystic fibrosis are virtually impossible to eradicate with antibiotics because biofilm-growing bacteria are highly tolerant to antibiotics and host defense mechanisms. Previously, we found that ginseng treatments....... aeruginosa, but significantly prevented P. aeruginosa from forming biofilm. Exposure to 0.5% ginseng aqueous extract for 24 h destroyed most 7-day-old mature biofilms formed by both mucoid and nonmucoid P. aeruginosa strains. Ginseng treatment enhanced swimming and twitching motility, but reduced swarming...

355-nm hypersensitization of optical fibers

NARCIS (Netherlands)

Canagasabey, A.; Canning, J.; Groothoff, N.

2003-01-01

A study is presented on 355-nm hypersensitization of optical fibers. It is found that the intrinsic 244-nm photosensitivity of boron-codoped germanosilicate optical fibers is enhanced by 355-nm hypersensitization. Hypersensitization through standard polymer coating is also demonstrated.

Up-taper-based Mach-Zehnder interferometer for temperature and strain simultaneous measurement.

Science.gov (United States)

Kang, Zexin; Wen, Xiaodong; Li, Chao; Sun, Jiang; Wang, Jing; Jian, Shuisheng

2014-04-20

A novel all-fiber sensing configuration for simultaneous measurements of temperature and strain based on the up-taper Mach-Zehnder interferometer (MZI) with an in-line embedded fiber Bragg grating (FBG) is proposed and experimentally demonstrated. This configuration consists of two up-tapers fabricated by an excessive fusion splicing method and a short segment of inscribed FBG. Due to the different responses of the up-taper MZI and the FBG to the uniform variation of temperature and strain, the simultaneous measurement for these two variables could be achieved by real-time monitoring the transmission spectrum. For 0.01 nm wavelength resolution, a resolution of 0.311°C in temperature can be achieved, and the average strain resolution is 10.07 με.

Schedules of Controlled Substances: Placement of UR-144, XLR11, and AKB48 into Schedule I. Final rule.

Science.gov (United States)

2016-05-11

With the issuance of this final rule, the Drug Enforcement Administration places (1-pentyl-1H-indol-3-yl)(2,2,3,3-tetramethylcyclopropyl)methanone (UR-144), [1-(5-fluoro-pentyl)-1H-indol-3-yl](2,2,3,3-tetramethylcyclopropyl)methanone (5-fluoro-UR-144, XLR11), and N-(1-adamantyl)-1-pentyl-1H-indazole-3-carboxamide (APINACA, AKB48), including their salts, isomers, and salts of isomers whenever the existence of such salts, isomers, and salts of isomers is possible, into schedule I of the Controlled Substances Act. This scheduling action is pursuant to the Controlled Substances Act which requires that such actions be made on the record after opportunity for a hearing through formal rulemaking. This action imposes the regulatory controls and administrative, civil, and criminal sanctions applicable to schedule I controlled substances on persons who handle (manufacture, distribute, reverse distribute, import, export, engage in research, conduct instructional activities or chemical analysis, or possess), or propose to handle UR-144, XLR11, or AKB48.

Fixation of radioactive cerium-144 on white blood cells. Possibilities for use in physiopathology

International Nuclear Information System (INIS)

Aeberhardt, A.

1958-01-01

From the study of the means of transport of cerium in the blood of various laboratory animals, after intra-venous injection of 144 Ce- 144 Pr without carrier, we have been able to show up the part played by the white cells in the transport of this fission product during its passage in the blood. This observation has led to the study, in vitro, of the methods of cerium fixation on the white cells, with a view to determining the possibilities of using this property for white cell labelling, the methods used up to the present not being entirely satisfactory. Using the method for the separation of the known constituents of the blood proposed by us in 1956, we have studied the cerium fixation under various conditions: - on suspensions of white cells from the rabbit, - on a suspension of human white cells, - on the white cells in whole from the rabbit. (author) [fr

Modeling and Experimental Strain Measurements on a Non-Homogeneous Cylinder Under Transverse Load

National Research Council Canada - National Science Library

Viator, John A; Kreger, Stephen; Winz, Michele W; Udd, Eric

2004-01-01

...: core, cladding, and stress rods. We measure the strain on a multi-parameter ber Bragg grating written at 1550nm under transverse load at 0, 15, 30, 45, 60, 75, and 90 and compare these values with an analytical solution accounting for internal stresses and transverse load.

Species comparison of liver cancers induced by internally deposited /sup 144/Ce or /sup 239/Pu in dogs and Chinese hamsters

International Nuclear Information System (INIS)

Muggenburg, B.A.; Brooks, A.L.; Hahn, F.F.; Boecker, B.B.; McClellan, R.O.

1984-01-01

The risk of liver cancer from alpha-emitting radionuclides has been estimated for people from studies of patients injected with Thorotrast, which contains an alpha-emitting radionuclide. There is no corresponding estimation of the risk of liver cancers in people from internally-deposited beta-emitting radionuclides because of the lack of human data. Life-span studies in Beagle dogs exposed by inhalation to /sup 144/CeCl/sub 3/, a beta-emitting radionuclide, or by injection to /sup 239/Pu citrate, an alpha-emitting radionuclide, and in Chinese hamsters exposed by intravenous injections to /sup 144/Ce-/sup 144/Pr citrate or /sup 239/Pu citrate have provided information on liver cancers in these species. These radionuclides accumulated in the liver resulting in significant radiation exposure of the liver. Liver cancer occurred long after exposure. When the lifetime risks of liver cancer were calculated, /sup 239/Pu was found to be more effective than /sup 144/Ce in inducing liver cancers by factor of 10 to 12. The risk of liver cancer from internally-deposited beta emitters for people are estimated by assuming this relationship for people

Histologic evaluation of laser lipolysis: pulsed 1064-nm Nd:YAG laser versus cw 980-nm diode laser.

Science.gov (United States)

Mordon, Serge; Eymard-Maurin, Anne Françoise; Wassmer, Benjamin; Ringot, Jean

2007-01-01

The use of the laser as an auxiliary tool has refined the traditional technique for lipoplasty. During laser lipolysis, the interaction between the laser and the fat produced direct cellular destruction before the suction, reduced bleeding, and promoted skin tightening. This study sought to perform a comparative histologic evaluation of laser lipolysis with the pulsed 1064-nm Nd:YAG laser versus a continuous 980-nm diode laser. A pulsed 1064-nm Nd:YAG (Smart-Lipo; Deka, Italy) and a CW 980-nm diode laser (Pharaon, Osyris, France) were evaluated at different energy settings for lipolysis on the thighs of a fresh cadaver. The lasers were coupled to a 600-microm optical fiber inserted in a 1-mm diameter cannula. Biopsy specimens were taken on irradiated and non-irradiated areas. Hematoxylin-erythrosin-safran staining and immunostaining (anti-PS100 polyclonal antibody) were performed to identify fat tissue damage. In the absence of laser exposures (control specimens), cavities created by cannulation were seen; adipocytes were round in appearance and not deflated. At low energy settings, tumescent adipocytes were observed. At higher energy settings, cytoplasmic retraction, disruption of membranes, and heat-coagulated collagen fibers were noted; coagulated blood cells were also present. For the highest energy settings, carbonization of fat tissue involving fibers and membranes was clearly seen. For equivalent energy settings, 1064-nm and 980-nm wavelengths gave similar histologic results. Laser lipolysis is a relatively new technique that is still under development. Our histologic findings suggest several positive benefits of the laser, including skin retraction and a reduction in intraoperative bleeding. The interaction of the laser with the tissue is similar at 980 nm and 1064 nm with the same energy settings. Because higher volumes of fat are removed with higher total energy, a high-power 980-nm diode laser could offer an interesting alternative to the 1064-nm Nd

Sub-50 nm gate length SOI transistor development for high performance microprocessors

International Nuclear Information System (INIS)

Horstmann, M.; Greenlaw, D.; Feudel, Th.; Wei, A.; Frohberg, K.; Burbach, G.; Gerhardt, M.; Lenski, M.; Stephan, R.; Wieczorek, K.; Schaller, M.; Hohage, J.; Ruelke, H.; Klais, J.; Huebler, P.; Luning, S.; Bentum, R. van; Grasshoff, G.; Schwan, C.; Cheek, J.; Buller, J.; Krishnan, S.; Raab, M.; Kepler, N.

2004-01-01

Partial depleted (PD) SOI technologies have reached maturity for production of high speed, low power microprocessors. The paper will highlight several challenges found during the course of development for bringing 40 nm gate length (L GATE ) PD SOI transistors into volume manufacturing for high-speed microprocessors. The key innovations developed for this transistor in order to overcome classical gate oxide and L GATE scaling is an unique differential triple spacer structure, stressed overlayer films inducing strain in the Silicon channel and optimized junctions. This transistor structure yields an outstanding ring oscillator speed with an unloaded inverter delay of 5.5 ps. The found improvements are highly manufacturable and scaleable for future device technologies like FD SOI

The effect of dispersoids on the grain refinement mechanisms during deformation of aluminium alloys to ultra-high strains

International Nuclear Information System (INIS)

Apps, P.J.; Berta, M.; Prangnell, P.B.

2005-01-01

The effect of fine dispersoids on the mechanisms and rate of grain refinement has been investigated during the severe deformation of a model aluminium alloy. A binary Al-0.2Sc alloy, containing coherent Al 3 Sc dispersoids, of ∼20 nm in diameter and ∼100 nm spacing, has been deformed by equal channel angular extrusion to an effective strain of ten. The resulting deformation structures were quantitatively analysed using high-resolution electron backscattered diffraction orientation mapping, and the results have been compared to those obtained from a single-phase Al-0.13Mg alloy, deformed under identical conditions. The presence of fine, non-shearable, dispersoids has been found to homogenise slip, retard the formation of a cellular substructure and inhibit the formation of microshear bands during deformation. These factors combine to reduce the rate of high-angle grain boundary generation at low to medium strains and, hence, retard the formation of a submicron grain structure to higher strains during severe deformation

Hypersensitisation using 266nm Laser Light

DEFF Research Database (Denmark)

Sørensen, Henrik Rokkjær; Canning, John; Kristensen, Martin

UV-hypersensitisation using 266nm VW-light on hydrogenated Ge-doped fibre is reported. The optimum fluence to be between 5 to 10 kJ/cm2, coinciding with results obtained using 355nm light, indicating same end-process in both reactions.......UV-hypersensitisation using 266nm VW-light on hydrogenated Ge-doped fibre is reported. The optimum fluence to be between 5 to 10 kJ/cm2, coinciding with results obtained using 355nm light, indicating same end-process in both reactions....

The long noncoding RNA TUG1 regulates blood-tumor barrier permeability by targeting miR-144.

Science.gov (United States)

Cai, Heng; Xue, Yixue; Wang, Ping; Wang, Zhenhua; Li, Zhen; Hu, Yi; Li, Zhiqing; Shang, Xiuli; Liu, Yunhui

2015-08-14

Blood-tumor barrier (BTB) limits the delivery of chemotherapeutic agent to brain tumor tissues. Long non-coding RNAs (lncRNAs) have been shown to play critical regulatory roles in various biologic processes of tumors. However, the role of lncRNAs in BTB permeability is unclear. LncRNA TUG1 (taurine upregulated gene 1) was highly expressed in glioma vascular endothelial cells from glioma tissues. It also upregulated in glioma co-cultured endothelial cells (GEC) from BTB model in vitro. Knockdown of TUG1 increased BTB permeability, and meanwhile down-regulated the expression of the tight junction proteins ZO-1, occludin, and claudin-5. Both bioinformatics and luciferase reporter assays demonstrated that TUG1 influenced BTB permeability via binding to miR-144. Furthermore, Knockdown of TUG1 also down-regulated Heat shock transcription factor 2 (HSF2), a transcription factor of the heat shock transcription factor family, which was defined as a direct and functional downstream target of miR-144. HSF2 up-regulated the promoter activities and interacted with the promoters of ZO-1, occludin, and claudin-5 in GECs. In conclusion, our results indicate that knockdown of TUG1 increased BTB permeability via binding to miR-144 and then reducing EC tight junction protein expression by targeting HSF2. Thus, TUG1 may represent a useful future therapeutic target for enhancing BTB permeability.

Mechanistic aspects of biosynthesis of silver nanoparticles by several Fusarium oxysporum strains

Directory of Open Access Journals (Sweden)

De Souza Gabriel IH

2005-07-01

Full Text Available Abstract Extracellular production of metal nanoparticles by several strains of the fungus Fusarium oxysporum was carried out. It was found that aqueous silver ions when exposed to several Fusarium oxysporum strains are reduced in solution, thereby leading to the formation of silver hydrosol. The silver nanoparticles were in the range of 20–50 nm in dimensions. The reduction of the metal ions occurs by a nitrate-dependent reductase and a shuttle quinone extracellular process. The potentialities of this nanotechnological design based in fugal biosynthesis of nanoparticles for several technical applications are important, including their high potential as antibacterial material.

Variable magnification dual lens electron holography for semiconductor junction profiling and strain mapping

International Nuclear Information System (INIS)

Wang, Y.Y.; Li, J.; Domenicucci, A.; Bruley, J.

2013-01-01

Dual lens operation for electron holography, which was developed previously (Wang et al., Ultramicroscopy 101 (2004) 63–72; US patent: 7,015,469 B2 (2006)), is re-investigated for bright field (junction profiling) and dark field (strain mapping) electron holography using FEI instrumentation (i.e. F20 and Titan). It is found that dual lens operation provides a wide operational range for electron holography. In addition, the dark field image tilt increases at high objective lens current to include Si 〈0 0 4〉 diffraction spot. Under the condition of high spatial resolution (1 nm fringe spacing), a large field of view (450 nm), and high fringe contrast (26%) with dual lens operation, a junction map is obtained and strain maps of Si device on 〈2 2 0〉 and 〈0 0 4〉 diffraction are acquired. In this paper, a fringe quality number, N′, which is number of fringe times fringe contrast, is proposed to estimate the quality of an electron hologram and mathematical reasoning for the N′ number is provided. -- Highlights: ► Dual lens electron holography is implemented on FEI instruments (Titan and F20). ► Wide range of field of view (0.1–0.9 μm) and fringe spacing (0.5–6 nm) is achieved. ► Fringe quality number is proposed to quantify the quality of an electron hologram. ► Junction map at high spatial resolution is provided. ► Strain maps along 〈2 2 0〉 and 〈0 0 4〉 direction of Si by dark field electron holography are reported.

Advances in 750 nm VECSELs (Conference Presentation)

Science.gov (United States)

Saarinen, Esa J.; Ranta, Sanna; Lyytikäinen, Jari; Saarela, Antti; Sirbu, Alexei; Iakovlev, Vladimir; Kapon, Eli; Guina, Mircea

2017-03-01

Lasers operating in the transmission window of tissue at wavelengths between 700 and 800 nm are needed in numerous medical and biomedical applications, including photodynamic therapy and fluorescence microscopy. However, the performance of diode lasers in this spectral range is limited by the lack of appropriate compound semiconductors. Here, we review our recent research on 750 nm VECSELs. Two approaches to reaching the 750 nm wavelength will be discussed. The first approach relies on intra-cavity frequency doubling a wafer-fused 1500 nm VECSEL. The VECSEL gain chip comprises a GaAs-based DBR and an InP-based gain section, which allows for optical pumping with low-cost commercial diodes at 980 nm. With this scheme we have achieved watt-level output powers and tuning of the laser wavelength over a 40 nm band at around 750 nm. The second approach is direct emission at 750 nm using the AlGaAs/GaAs material system. In this approach visible wavelengths are required for optical pumping. However, the consequent higher costs compared to pumping at 980 nm are mitigated by the more compact laser setup and prospects of doubling the frequency to the ultraviolet range.

Rapid separation of pure 144Ce fraction from fuel dissolver solution for demonstration experiment on secular equilibrium

International Nuclear Information System (INIS)

Ashok Kumar, G.V.S.; Kumar, R.; Venkata Subramani, C.R.

2015-01-01

Radioactive equilibrium is a condition in which the activity ratio of parent to its daughter is maintained constant with time which occurs only when the parent half-life is greater than daughter half-life. It is transient equilibrium in the case of the ratio of their half-lives of parent to daughter being less than an order whereas it becomes secular equilibrium when it is more than an order. In the case of secular equilibrium, the ratio of the activities becomes unity whereas the same depends on the decay constants of the parent and daughter nuclide for the transient equilibrium. 144 Ce- 144 Pr pair is a good example for the demonstration of secular equilibrium

Total synthesis and related studies of large, strained, and bioactive natural products

Science.gov (United States)

HIRAMA, Masahiro

2016-01-01

Our chemical syntheses and related scientific investigations of natural products with complex architectures and powerful biological activities are described, focusing on the very large 3 nm-long polycyclic ethers called the ciguatoxins, highly strained and labile chromoprotein antitumor antibiotics featuring nine-membered enediyne cores, and extremely potent anthelmintic macrolides called the avermectins. PMID:27725470

Effects of the dimeric PSD-95 inhibitor UCCB01-144 in mouse models of pain, cognition and motor function

DEFF Research Database (Denmark)

Andreasen, Jesper T; Nasser, Arafat; Caballero-Puntiverio, Maitane

2016-01-01

NOS interaction has therefore been proposed as an alternative analgesic mechanism. We recently reported that UCCB01-125, a dimeric PSD-95 inhibitor with limited blood-brain-barrier permeability, reduced mechanical hypersensitivity in the complete Freund's adjuvant (CFA) inflammatory pain model, without disrupting...... of neuropathic pain. Potential cognitive effects of UCCB01-144 were examined using the social transmission of food preference (STFP) test and the V-maze test, and motor coordination was assessed with the rotarod test. UCCB01-144 (10mg/kg) reversed CFA-induced mechanical hypersensitivity after 1h, and completely...

Transparent conductive-polymer strain sensors for touch input sheets of flexible displays

International Nuclear Information System (INIS)

Takamatsu, Seiichi; Takahata, Tomoyuki; Muraki, Masato; Iwase, Eiji; Matsumoto, Kiyoshi; Shimoyama, Isao

2010-01-01

A transparent conductive polymer-based strain-sensor array, designed especially for touch input sheets of flexible displays, was developed. A transparent conductive polymer, namely poly(3, 4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS), was utilized owing to its strength under repeated mechanical bending. PEDOT:PSS strain sensors with a thickness of 130 nm exhibited light transmittance of 92%, which is the same as the transmittance of ITO electrodes widely used in flat panel displays. We demonstrated that the sensor array on a flexible sheet was able to sustain mechanical bending 300 times at a bending radius of 5 mm. The strain sensor shows a gauge factor of 5.2. The touch point on a flexible sheet could be detected from histograms of the outputs of the strain sensors when the sheet was pushed with an input force of 5 N. The touch input could be detected on the flexible sheet with a curved surface (radius of curvature of 20 mm). These results show that the developed transparent conductive polymer-based strain-sensor array is applicable to touch input sheets of mechanically bendable displays.

Passive wireless strain measurement based upon the Villari effect and giant magnetoresistance

Science.gov (United States)

Windl, Roman; Bruckner, Florian; Abert, Claas; Huber, Christian; Vogler, Christoph; Huber, Thomas; Oezelt, Harald; Suess, Dieter

2016-12-01

A passive wireless radio frequency-identification (RFID) stress/strain sensor is presented. Stress is transformed into a change of magnetic field by utilizing an amorphous metal ribbon. This magnetic field change is measured by a giant magnetoresistance magnetic field sensor and converted into a digital value with a RFID chip for wireless access. Standard metal foil strain gauges have a gauge factor GF from around 2 to 5 and suffer from the disadvantage of a physically connected power supply and measurement equipment. For the presented sensor, a strain range of -10 μm/m to 190 μm/m results in a linear sensor response, a gauge factor of GF ≈ 245, and a detectivity of 4.10 nm/m 1/√{Hz } . The detectivity of the presented sensor is similar to the detectivity of a reference metal foil strain gauge. Due to low power consumption and easy signal analysis, this sensor is well suited for long term strain measurement inside closed spaces. RFID adds features like multiple tag detection, wireless passive operation and a user data storage.

Change of deformation at the backbending in the yrast superdeformed band of {sup 144}Gd

Energy Technology Data Exchange (ETDEWEB)

Ur, C.A.; Bolzonella, G.P.; Bazzacco, D. [dell`Universita, Padova (Italy)]|[INFN, Padova (Italy)] [and others

1996-12-31

A mean lifetime measurement using the Doppler shift attenuation method has been performed at GASP in order to extract the quadrupole moment of the yrast SD band of {sup 144}Gd. The extracted intrinsic quadrupole moments, being Q{sub 0}=13.7 eb above the backbending and Q{sub 0}=11.8 eb below the backbending, are consistent with a change of deformation from {beta}{sub 2}=0.51 (at {beta}{sub 4} {approx} 0.050) to {beta}{sub 2}=0.45 (at {beta}{sub 4} {approx}0.035). The experimental results are in nice agreement with the theoretical predictions, which revealed that the second well in {sup 144}Gd arises essentially from the very favored shell structure at N=80 and Z=64. The occupation at higher frequency of the aligned N=6 proton orbitals drives the nucleus to a slightly more deformed shape.

40 CFR 144.7 - Identification of underground sources of drinking water and exempted aquifers.

Science.gov (United States)

2010-07-01

..., all aquifers or parts of aquifers which meet the definition of an “underground source of drinking... underground source of drinking water if it meets the definition in § 144.3. (b)(1) The Director may identify... mineral or hydrocarbon producing. Information contained in the mining plan for the proposed project, such...

NODC Standard Format Marine Toxic Substances and Pollutants (F144) chemical identification codes (NODC Accession 9200273)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This archival information package contains a listing of codes and chemical names that were used in NODC Standard Format Marine Toxic Substances and Pollutants (F144)...

Strain induced tunable wavelength filters based on flexible polymer waveguide Bragg reflector.

Science.gov (United States)

Kim, Kyung-Jo; Seo, Jun-Kyu; Oh, Min-Cheol

2008-02-04

A tunable wavelength filter is demonstrated by imposing a strain on a polymeric Bragg reflection waveguide fabricated on a flexible substrate. The highly elastic property of flexible polymer device enables much wider tuning than the silica fiber. To produce a uniform grating pattern on a flexible plastic substrate, a post lift-off process along with an absorbing layer is incorporated. The flexible Bragg reflector shows narrow bandwidth, which is convincing the uniformity of the grating structure fabricated on plastic film. By stretching the flexible polymer device, the Bragg reflection wavelength is tuned continuously up to 45 nm for the maximum strain of 31,690 muepsilon, which is determined by the elastic expansion limit of waveguide polymer. From the linear wavelength shift proportional to the strain, the photoelastic coefficient of the ZPU polymer is found.

P. aeruginosa in the paranasal sinuses and transplanted lungs have similar adaptive mutations as isolates from chronically infected CF lungs

DEFF Research Database (Denmark)

Ciofu, Oana; Johansen, Helle Krogh; Aanaes, Kasper

2013-01-01

BACKGROUND: Pseudomonas aeruginosa cells are present as biofilms in the paranasal sinuses and the lungs of chronically infected cystic fibrosis (CF) patients. Since different inflammatory responses and selective antibiotic pressures are acting in the sinuses compared with the lungs, we compared...... the adaptive profiles of mucoid and non-mucoid isolates from the two locations. METHODS: We studied the genetic basis of phenotypic diversification and gene expression profiles in sequential lung and sinus P. aeruginosa isolates from four chronically infected CF patients, including pre- and post-lung...... transplantation isolates. RESULTS: The same phenotypes caused by similar mutations and similar gene expression profiles were found in mucoid and non-mucoid isolates from the paranasal sinuses and from the lungs before and after transplantation. CONCLUSION: Bilateral exchange of P. aeruginosa isolates between...

An Antipersister Strategy for Treatment of Chronic Pseudomonas aeruginosa Infections.

Science.gov (United States)

Koeva, Martina; Gutu, Alina D; Hebert, Wesley; Wager, Jeffrey D; Yonker, Lael M; O'Toole, George A; Ausubel, Frederick M; Moskowitz, Samuel M; Joseph-McCarthy, Diane

2017-12-01

Bacterial persisters are a quasidormant subpopulation of cells that are tolerant to antibiotic treatment. The combination of the aminoglycoside tobramycin with fumarate as an antibacterial potentiator utilizes an antipersister strategy that is aimed at reducing recurrent Pseudomonas aeruginosa infections by enhancing the killing of P. aeruginosa persisters. Stationary-phase cultures of P. aeruginosa were used to generate persister cells. A range of tobramycin concentrations was tested with a range of metabolite concentrations to determine the potentiation effect of the metabolite under a variety of conditions, including a range of pH values and in the presence of azithromycin or cystic fibrosis (CF) patient sputum. In addition, 96-well dish biofilm and colony biofilm assays were performed, and the cytotoxicity of the tobramycin-fumarate combination was determined utilizing a lactate dehydrogenase (LDH) assay. Enhanced killing of up to 6 orders of magnitude of P. aeruginosa persisters over a range of CF isolates, including mucoid and nonmucoid strains, was observed for the tobramycin-fumarate combination compared to killing with tobramycin alone. Furthermore, significant fumarate-mediated potentiation was seen in the presence of azithromycin or CF patient sputum. Fumarate also reduced the cytotoxicity of tobramycin-treated P. aeruginosa to human epithelial airway cells. Finally, in mucoid and nonmucoid CF isolates, complete eradication of P. aeruginosa biofilm was observed in the colony biofilm assay due to fumarate potentiation. These data suggest that a combination of tobramycin with fumarate as an antibacterial potentiator may be an attractive therapeutic for eliminating recurrent P. aeruginosa infections in CF patients through the eradication of bacterial persisters. Copyright © 2017 American Society for Microbiology.

Generation of uniaxial tensile strain of over 1% on a Ge substrate for short-channel strained Ge n-type Metal–Insulator–Semiconductor Field-Effect Transistors with SiGe stressors

International Nuclear Information System (INIS)

Moriyama, Yoshihiko; Kamimuta, Yuuichi; Ikeda, Keiji; Tezuka, Tsutomu

2012-01-01

Tensile strain of over 1% in Ge stripes sandwiched between a pair of SiGe source-drain stressors was demonstrated. The Metal–Oxide–Semiconductor Field-Effect Transistor (MOSFET)-like structures were fabricated on a (001)-Ge substrate having SiO 2 dummy-gate stripes with widths down to 26 nm. Recess-regions adjacent to the dummy-gate stripes were formed by an anisotropic wet etching technique. A damage-free and well-controlled anisotropic wet etching process is developed in order to avoid plasma-induced damage during a conventional Reactive-ion Etching process. The SiGe stressors were epitaxially grown on the recesses to simulate strained Ge n-channel Metal–Insulator–Semiconductor Field-Effect Transistors (MISFETs) having high electron mobility. A micro-Raman spectroscopy measurement revealed tensile strain in the narrow Ge regions which became higher for narrower regions. Tensile strain of up to 1.2% was evaluated from the measurement under an assumption of uniaxial strain configuration. These results strongly suggest that higher electron mobility than the upper limit for a Si-MOSFET is obtainable in short-channel strained Ge-nMISFETs with the embedded SiGe stressors.

Mutagenesis of Xanthomonas campestris and selection of strains with enhanced Xanthan production

International Nuclear Information System (INIS)

Kamal, F.; Mehrgan, H.; Mazaheri, M.; Mortazavi, A. R.

2003-01-01

Xanthan gum is microbial polysaccharide of great commercial importance as it has been unusual rheological properties in solution and consequent range of applications. In this study, a series of mutants were isolated from Xanthomonas PTSS 1473 by ethyl methanesulfonate mutagenesis. The polysaccharide yield of one mutant, XC1473E 2 , was 30% better than that of the parent strain. It also showed higher xanthan formation of glucose consumption rates compared to the parent strain. xanthan produced by the mutant and enhanced viscosity, higher pseudo plasticity and larger molecular weight. Since mutant XC1473E 2 appeared white on agar plates, it underwent pigment extraction with methanol. Contrary to the parent strain, the mutant showed no absorption at 443 nm, i.e. the wavelength related to yellow pigment. This finding suggested that yellow pigmentation and normal xanthan biosynthesis are not necessarily concurrent. In general, mutant ZC1473e 2 seems to be a strain with interesting characteristics for use in commercial production of Xanthan

Growth and Survival of Some Probiotic Strains in Simulated Ice Cream Conditions

Science.gov (United States)

Homayouni, A.; Ehsani, M. R.; Azizi, A.; Razavi, S. H.; Yarmand, M. S.

A Completely Randomized Design (CRD) experiment was applied in triplicates to evaluate the survival of four probiotic strains in simulated ice cream conditions. The growth and survival rate of these probiotic strains (Lactobacillus acidophilus, Lactobacillus casei, Bifidobacterium bifidum and Bifidobacterium longum) in varying amount of sucrose (10, 15, 20 and 25%), oxygen scavenging components (0.05% L-cysteine and 0.05% L-ascorbate) and temperatures (4 and -20°C) during different periods of time (1, 2 and 3 months) were evaluated in MRS-broth medium. Optical density at 580 nm was used to measure growth. Lactobacilli strains proved to be highly resistant in comparison with Biffidobacteria strains. The viable cell number of Lactobacillus casei in different sucrose concentrations, different oxidoreduction potentials and refrigeration temperature was 1x1010, 2x108 and 5x107 cfu mL-1, respectively. Growth and survival rate of Lactobacillus casei showed to be the highest.

Studies on strain relaxation of La{sub 0.5}Ba{sub 0.5}MnO{sub 3} film by normal and grazing incidence X-ray diffraction

Energy Technology Data Exchange (ETDEWEB)

Wang, Haiou [Hangzhou Dianzi University, Institute of Materials Physics, Hangzhou (China); Tan, Weishi [Hunan City University, College of Communication and Electronic Engineering, Yiyang (China); Nanjing University of Science and Technology, Key Laboratory of Soft Chemistry and Functional Materials, Department of Applied Physics, Ministry of Education, Nanjing (China); Liu, Hao [Suzhou Institute of Industrial Technology, Department of Electronic and Communication Engineering, Suzhou (China); Cao, Mengxiong; Wang, Xingyu; Ma, Chunlin [Nanjing University of Science and Technology, Key Laboratory of Soft Chemistry and Functional Materials, Department of Applied Physics, Ministry of Education, Nanjing (China); Jia, Quanjie [The Chinese Academy of Sciences, Institute of High Energy Physics, Beijing (China)

2017-03-15

Perovskite manganite La{sub 0.5}Ba{sub 0.5}MnO{sub 3} (LBMO) films were deposited on (001)-oriented single-crystal SrTiO{sub 3} (STO) substrates by pulsed laser deposition. High-resolution X-ray diffraction and grazing incidence X-ray diffraction techniques were applied to characterize the crystal structure and lattice strain of LBMO films. The in-plane and out-of-plane growth orientations of LBMO films with respect to substrate surface have been studied. The epitaxial orientation relationship LBMO (001) [100] //STO (001) [100] exists at the LBMO/STO interface. The lattice strain of LBMO film begins to relax with the thickness of LBMO film up to 12 nm. When the thickness is further increased up to 43 nm, the film is in fully strain-relaxed state. Jahn-Teller strain plays an important role in LBMO/STO system. The mechanism for strain relaxation is in accordance with that of tetragonal distortion. (orig.)

A comparative study with a 755 nm picosecond Alexandrite laser with a diffractive lens array and a 532 nm/1064 nm Nd:YAG with a holographic optic.

Science.gov (United States)

Tanghetti Md, Emil; Jennings, John

2018-01-01

This study was performed to better understand the cutaneous effects of using a fractional picosecond laser at 755 nm with a diffractive lens array and a picosecond Nd:YAG laser at 532 mn and 1064 nm with a holographic optic. We characterized the injuries created by these devices on skin clinically and histologically over 24 hours. With this information we modeled the effects of these devices on a cutaneous target. Eight patients, representing Fitzpatrick skin types I-VI, were treated on their backs with a picosecond Alexandrite laser with a diffractive lens array, as well as a picosecond Nd:YAG laser at 532 nm and 1064 nm with a holographic optic. Photographs were taken 15 minutes and 24 hours after treatments. Punch biopsies were obtained at 24 hours and examined histologically. Treatment with the picosecond Nd:YAG laser at both 532 nm and 1064 nm with the holographic optic revealed erythema and small scatted areas of petechial hemorrhage areas immediately and in many cases at 24 hours after treatment. The 755 nm picosecond Alexandrite laser with diffractive lens array produced erythema immediately after treatment, which largely dissipated 24 hours later. Histologies revealed intra-epidermal vacuoles with all three wavelengths. Fractional picosecond Nd:YAG laser at 532 nm and 1064 nm with the holographic optic showed focal areas of dermal and intra-epidermal hemorrhage with areas of vascular damage in some patients. This study demonstrates that both fractional picosecond devices produce vacuoles in the skin, which are most likely due to areas of laser induced optical breakdown (LIOB). In the patients (skin type II-IV) we observed scatter areas of hemorrhage in the skin, due to vascular damage with the 532 nm and 1064 nm, but not with 755 nm wavelengths. Lasers Surg. Med. 50:37-44, 2018. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Comparative analysis of the effect of the GaAlAs laser irradiation in 780 nm and 660 nm in the hypersensitive dentin; Analise comparativa do efeito da irradiacao do laser de GaAlAs em 780 nm e 660 nm na hipersensibilidade dentinaria

Energy Technology Data Exchange (ETDEWEB)

Yuan, Sun Chien

2003-07-01

This study was to evaluate and compare the effects of the low intensity in laser radiation among GaAlAs 780 nm and GaAlAs 660 nm. The main proposal is to verify if there is any difference of the effects or results in low intensity laser application treatment of hypersensitive dentin, keeping the same parameters, only differing in wavelength. The samples were distributed in two groups. Group A 90 cases, treated with GaAlAs 780 nm and group B irradiated with GaAlAs 660 nm with a total of 76 cases analyzed. The results of application with GaAlAs 660 nm and GaAlAs 780 nm do not differ statistically. Which means using any one of the irradiation gives the same results. However can be noted that the response of reduction of hypersensitivity is faster with the radiation of GaAlAs 780 nm, but the results after three applications is the same for both types of radiation. (author)

The effects of exogenous catalase on broad-spectrum near-UV (300-400nm) treated Escherichia coli cells

International Nuclear Information System (INIS)

Sammartano, L.J.; Tuveson, R.W.

1984-01-01

Catalase incorporated into plating medium protects against inactivation and mutagenesis by broad-spectrum near-ultraviolet wavelength (300-400nm) (NUV) radiation in strains of Escherichia coli. Plating medium containing catalase does not provide protection against inactivation by wavelengths in the FUV region. Catalase added to the cell suspension during or added immediately after NUV exposure also protects against inactivation. The protection provided by catalase suggests a possible role for hydrogen peroxide in the processes of inactivation and mutagenesis by broad-spectrum NUV. (author)

Efficient continuous-wave 1112 nm Nd:YAG laser operation under direct diode pumping at 885 nm

International Nuclear Information System (INIS)

Gao, J; Dai, X J; Zhang, L; Wu, X D

2013-01-01

We report compact diode-end-pumped continuous-wave laser operation at 1112 nm under 885 nm diode-direct pumping for the first time. On the basis of the R 2 →Y 6 transition in a conventional Nd:YAG (yttrium aluminum garnet) single crystal, the maximum output power of 12.5 W is achieved, with an optical to optical efficiency of 46.6% and a slope efficiency of 52.9%. To the best of our knowledge, this represents the highest output at 1112 nm generated by a diode-end-pumped Nd:YAG laser. Furthermore, it is the highest optical to optical efficiency ever reported for 1112 nm Nd:YAG lasers. The short term power stability is ∼0.32% at 12.0 W output. (letter)

Dielectric parameters of blood plasma of rats treated with cerium-144 and external irradiation

International Nuclear Information System (INIS)

Hadzhidekova, E.; Kiradzhiev, G.; Paskalev, Z.; Miloslavov, V.

1988-01-01

Investigation was carried out of the dielectric parameters of blood plasma of male Wistar rats treated with cerium 144 in doses of 370 kBq/animal and external gamma irradiation in doses of 200 cGy and 400 cGy. The radioactive cerium was introduced intraperitoneally 1 h after the external irradiation with dose rate of 1,6 cGy/sec. The permittivity ε, the time of relaxation τ and the coefficient of Debaye κ of plasma protein molecules were determined at the 1st, 3rd, 10th, 15th, and 30th days after treatement for frequence ranges of 1,4, 2,2, 3,6 and 6 MHz. At the same terms the content of cerium 144 was measured in the organs of predilectional accumulation of cerium. It was established that the treatment only with cerium lead to most essential changes of dielectric parameters at frequence of 3,6 MHz. The external irradiation didn't influence essentially the kinetics of absorbed cerium. In combination of both radiation factors the action of cerium was predominant

Quasi-three level Nd:YLF fundamental and Raman laser operating under 872-nm and 880-nm direct diode pumping

Science.gov (United States)

Wetter, Niklaus U.; Bereczki, Allan; Paes, João. Pedro Fonseca

2018-02-01

Nd:YLiF4 is the gain material of choice whenever outstanding beam quality or a birefringent gain material is necessary such as in certain applications for terahertz radiation or dual-frequency mode-locking. However, for high power CW applications the material is hampered by a low thermal fracture threshold. This problem can be mitigated by special 2D pump set-ups or by keeping the quantum defect to a minimum. Direct pumping into the upper laser level of Nd:YLiF4 is usually performed at 880 nm. For quasi-three level laser emission at 908 nm, direct pumping at this wavelength provides a high quantum defect of 0.97, which allows for very high CW pump powers. Although the direct pumping transition to the upper laser state at 872 nm has a slightly smaller quantum defect of 0.96, its pump absorption cross section along the c-axis is 50% higher than at 880 nm, leading to a higher absorption efficiency. In this work we explore, for the first time to our knowledge, 908 nm lasing under 872 nm diode pumping and compare the results with 880 nm pumping for quasicw and cw operation. By inserting a KGW crystal in the cavity, Raman lines at 990 nm and 972 nm were obtained for the first time from a directly pumped 908 nm Nd:YLF fundamental laser for both quasi-cw and cw conditions.

Wrinkling instability in nanoparticle-supported graphene: implications for strain engineering

Science.gov (United States)

Cullen, William; Yamamoto, Mahito; Pierre-Louis, Olivier; Huang, Jia; Fuhrer, Michael; Einstein, Theodore

2013-03-01

We have carried out a systematic study of the wrinkling instability of graphene membranes supported on SiO2 substrates with randomly placed silica nanoparticles. At small nanoparticle density, monolayer graphene adheres to the substrate and is highly conformal over the nanoparticles. With increasing nanoparticle density, and decreasing nanoparticle separation to ~100 nm, graphene's elastic response dominates substrate adhesion, and elastic stretching energy is reduced by the formation of wrinkles which connect protrusions. Above a critical nanoparticle density, the wrinkles form a percolating network through the sample. As the graphene membrane is made thicker, delamination from the substrate is observed. Since the wrinkling instability acts to remove inhomogeneous in-plane elastic strains through out-of-plane buckling, our results can be used to place limits on the possible in-plane strain magnitudes that may be created in graphene to realized strain-engineered electronic structures.[2] Supported by the UMD NSF-MRSEC under Grant No. DMR 05-20471, the US ONR MURI and UMD CNAM.

Social Support, Social Strain, and Cognitive Function Among Community-Dwelling U.S. Chinese Older Adults.

Science.gov (United States)

Ge, Shaoqing; Wu, Bei; Bailey, Donald E; Dong, XinQi

2017-07-01

Limited research is available on the relationship between social support, social strain, and cognitive function among community-dwelling U.S. Chinese older adults. This study aims to examine the associations between social support/strain and cognitive outcomes. Data were drawn from the Population-Based Study of Chinese Elderly (N = 3,159). Cognitive function was measured by a battery of tests including the East Boston Memory Test, the Digit Span Backwards assessment, and the Symbol Digit Modalities Test. Social support and strain were measured by the scales drawn from the Health and Retirement study. Multiple regression analyses were conducted. Social support was significantly associated with global cognitive function (β = .11, SE = .02, p function (β = 1.44, SE = .37, p cognitive function (β = .23, SE = .05, p function (β = 2.75, SE = .85, p cognitive function (β = .04, SE = .02, p function (β = .71, SE = .29, p cognitive function (β = .10, SE = .03, p function (β = 1.28, SE = .49, p function (β = 3.59, SE = 1.17, p cognitive outcomes. Future longitudinal studies should be conducted. © The Author 2017. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Effects of strain rate and temperature on the mechanical behavior of carbon black reinforced elastomers based on butyl rubber and high molecular weight polyethylene

Science.gov (United States)

Hussein, M.

2018-06-01

The influence of the mechanical property and morphology of different blend ratio of Butyl rubber (IIR)/high molecular weight polyethylene (PE) by temperature and strain rate are performed. Special attention has been considered to a ductile-brittle transition that is known to occur at around 60 °C. The idea is to explain the unexpected phenomenon of brittleness which directly related to all tensile mechanical properties such as the strength of blends, modulus of elasticity of filled and unfilled IIR-polyethylene blends. In particular, the initial Young's modulus, tensile strength and strain at failure exhibit similar dependency on strain rate and temperature. These quantities lowered and increased with an increment of temperature, whereas the increased with increasing of strain rate. Furthermore, the tensile strength and strain at failure decreases for all temperatures range with the increase of PE content in the blend, except Young's modulus in reverse. The strain rate sensitivity index parameter of the examined polymeric materials is consistent with the micro-mechanisms of deformation and the behavior was well described by an Eyring relationship leading to an activation volume of ∼1 nm3, except for the highest value of unfilled IIR ∼8.45 nm3.

42 CFR 413.144 - Depreciation: Allowance for depreciation on fully depreciated or partially depreciated assets.

Science.gov (United States)

2010-10-01

... 42 Public Health 2 2010-10-01 2010-10-01 false Depreciation: Allowance for depreciation on fully... SKILLED NURSING FACILITIES Capital-Related Costs § 413.144 Depreciation: Allowance for depreciation on fully depreciated or partially depreciated assets. (a) Principle. Depreciation on assets being used by a...

Machine learning methods enable predictive modeling of antibody feature:function relationships in RV144 vaccinees.

Science.gov (United States)

Choi, Ickwon; Chung, Amy W; Suscovich, Todd J; Rerks-Ngarm, Supachai; Pitisuttithum, Punnee; Nitayaphan, Sorachai; Kaewkungwal, Jaranit; O'Connell, Robert J; Francis, Donald; Robb, Merlin L; Michael, Nelson L; Kim, Jerome H; Alter, Galit; Ackerman, Margaret E; Bailey-Kellogg, Chris

2015-04-01

The adaptive immune response to vaccination or infection can lead to the production of specific antibodies to neutralize the pathogen or recruit innate immune effector cells for help. The non-neutralizing role of antibodies in stimulating effector cell responses may have been a key mechanism of the protection observed in the RV144 HIV vaccine trial. In an extensive investigation of a rich set of data collected from RV144 vaccine recipients, we here employ machine learning methods to identify and model associations between antibody features (IgG subclass and antigen specificity) and effector function activities (antibody dependent cellular phagocytosis, cellular cytotoxicity, and cytokine release). We demonstrate via cross-validation that classification and regression approaches can effectively use the antibody features to robustly predict qualitative and quantitative functional outcomes. This integration of antibody feature and function data within a machine learning framework provides a new, objective approach to discovering and assessing multivariate immune correlates.

Machine learning methods enable predictive modeling of antibody feature:function relationships in RV144 vaccinees.

Directory of Open Access Journals (Sweden)

Ickwon Choi

2015-04-01

Full Text Available The adaptive immune response to vaccination or infection can lead to the production of specific antibodies to neutralize the pathogen or recruit innate immune effector cells for help. The non-neutralizing role of antibodies in stimulating effector cell responses may have been a key mechanism of the protection observed in the RV144 HIV vaccine trial. In an extensive investigation of a rich set of data collected from RV144 vaccine recipients, we here employ machine learning methods to identify and model associations between antibody features (IgG subclass and antigen specificity and effector function activities (antibody dependent cellular phagocytosis, cellular cytotoxicity, and cytokine release. We demonstrate via cross-validation that classification and regression approaches can effectively use the antibody features to robustly predict qualitative and quantitative functional outcomes. This integration of antibody feature and function data within a machine learning framework provides a new, objective approach to discovering and assessing multivariate immune correlates.

Strain management of AlGaN-based distributed Bragg reflectors with GaN interlayer grown by metalorganic chemical vapor deposition

Energy Technology Data Exchange (ETDEWEB)

Liu, Yuh-Shiuan; Kao, Tsung-Ting; Mehta, Karan; Jia, Xiao Jia; Shen, Shyh-Chiang; Yoder, P. Douglas; Detchprohm, Theeradetch; Dupuis, Russell D., E-mail: dupuis@gatech.edu [Center for Compound Semiconductors and School of Electrical and Computer Engineering, Georgia Institute of Technology, 777 Atlantic Dr. NW, Atlanta, Georgia 30332-0250 (United States); Wang, Shuo; Xie, Hongen; Ponce, Fernando A. [Department of Physics, Arizona State University, Tempe, Arizona 85287-1504 (United States)

2016-08-22

We report the crack-free growth of a 45-pair Al{sub 0.30}Ga{sub 0.70}N/Al{sub 0.04}Ga{sub 0.96}N distributed Bragg reflector (DBR) on 2 in. diameter AlN/sapphire template by metalorganic chemical vapor deposition. To mitigate the cracking issue originating from the tensile strain of Al{sub 0.30}Ga{sub 0.70}N on GaN, an AlN template was employed in this work. On the other hand, strong compressive strain experienced by Al{sub 0.04}Ga{sub 0.96}N favors 3D island growth, which is undesired. We found that inserting an 11 nm thick GaN interlayer upon the completion of AlN template layer properly managed the strain such that the Al{sub 0.30}Ga{sub 0.70}N/Al{sub 0.04}Ga{sub 0.96}N DBR was able to be grown with an atomically smooth surface morphology. Smooth surfaces and sharp interfaces were observed throughout the structure using high-angle annular dark-field imaging in the STEM. The 45-pair AlGaN-based DBR provided a peak reflectivity of 95.4% at λ = 368 nm with a bandwidth of 15 nm.

Wavelength dependence on the forensic analysis of glass by nanosecond 266 nm and 1064 nm laser induced breakdown spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Cahoon, Erica M.; Almirall, Jose R.

2010-05-01

Laser induced breakdown spectroscopy can be used for the chemical characterization of glass to provide evidence of an association between a fragment found at a crime scene to a source of glass of known origin. Two different laser irradiances, 266 nm and 1064 nm, were used to conduct qualitative and quantitative analysis of glass standards. Single-pulse and double-pulse configurations and lens-to-sample-distance settings were optimized to yield the best laser-glass coupling. Laser energy and acquisition timing delays were also optimized to result in the highest signal-to-noise ratio corresponding to the highest precision and accuracy. The crater morphology was examined and the mass removed was calculated for both the 266 nm and 1064 nm irradiations. The analytical figures of merit suggest that the 266 nm and 1064 nm wavelengths are capable of good performance for the forensic chemical characterization of glass. The results presented here suggest that the 266 nm laser produces a better laser-glass matrix coupling, resulting in a better stoichiometric representation of the glass sample. The 266 nm irradiance is therefore recommended for the forensic analysis and comparison of glass samples.

Wavelength dependence on the forensic analysis of glass by nanosecond 266 nm and 1064 nm laser induced breakdown spectroscopy

International Nuclear Information System (INIS)

Cahoon, Erica M.; Almirall, Jose R.

2010-01-01

Laser induced breakdown spectroscopy can be used for the chemical characterization of glass to provide evidence of an association between a fragment found at a crime scene to a source of glass of known origin. Two different laser irradiances, 266 nm and 1064 nm, were used to conduct qualitative and quantitative analysis of glass standards. Single-pulse and double-pulse configurations and lens-to-sample-distance settings were optimized to yield the best laser-glass coupling. Laser energy and acquisition timing delays were also optimized to result in the highest signal-to-noise ratio corresponding to the highest precision and accuracy. The crater morphology was examined and the mass removed was calculated for both the 266 nm and 1064 nm irradiations. The analytical figures of merit suggest that the 266 nm and 1064 nm wavelengths are capable of good performance for the forensic chemical characterization of glass. The results presented here suggest that the 266 nm laser produces a better laser-glass matrix coupling, resulting in a better stoichiometric representation of the glass sample. The 266 nm irradiance is therefore recommended for the forensic analysis and comparison of glass samples.

Large bandgap blueshifts in the InGaP/InAlGaP laser structure using novel strain-induced quantum well intermixing

KAUST Repository

Al-Jabr, Ahmad

2016-04-04

We report on a novel quantum well intermixing (QWI) technique that induces a large degree of bandgapblueshift in the InGaP/InAlGaP laser structure. In this technique, high external compressive strain induced by a thick layer of SiO2 cap with a thickness ≥1 μm was used to enhance QWI in the tensile-strained InGaP/InAlGaP quantum well layer. A bandgapblueshift as large as 200 meV was observed in samples capped with 1-μm SiO2 and annealed at 1000 °C for 120 s. To further enhance the degree of QWI, cycles of annealing steps were applied to the SiO2 cap. Using this method, wavelength tunability over the range of 640 nm to 565 nm (∼250 meV) was demonstrated. Light-emitting diodes emitting at red (628 nm), orange (602 nm), and yellow (585 nm) wavelengths were successfully fabricated on the intermixed samples. Our results show that this new QWI method technique may pave the way for the realization of high-efficiency orange and yellow light-emitting devices based on the InGaP/InAlGaP material system.

Large bandgap blueshifts in the InGaP/InAlGaP laser structure using novel strain-induced quantum well intermixing

Energy Technology Data Exchange (ETDEWEB)

Al-Jabr, A. A.; Majid, M. A.; Alias, M. S.; Ng, T. K.; Ooi, B. S., E-mail: boon.ooi@kaust.edu.sa [Photonics Laboratory, King Abdullah University of Science & Technology (KAUST), Thuwal 23955-6900, Kingdom of Saudi Arabia (KSA) (Saudi Arabia); Anjum, D. H. [Advanced Nanofabrication, Imaging and Characterization Core Facilities, (KAUST), Thuwal 23955-6900, Kingdom of Saudi Arabia (KSA) (Saudi Arabia)

2016-04-07

We report on a novel quantum well intermixing (QWI) technique that induces a large degree of bandgap blueshift in the InGaP/InAlGaP laser structure. In this technique, high external compressive strain induced by a thick layer of SiO{sub 2} cap with a thickness ≥1 μm was used to enhance QWI in the tensile-strained InGaP/InAlGaP quantum well layer. A bandgap blueshift as large as 200 meV was observed in samples capped with 1-μm SiO{sub 2} and annealed at 1000 °C for 120 s. To further enhance the degree of QWI, cycles of annealing steps were applied to the SiO{sub 2} cap. Using this method, wavelength tunability over the range of 640 nm to 565 nm (∼250 meV) was demonstrated. Light-emitting diodes emitting at red (628 nm), orange (602 nm), and yellow (585 nm) wavelengths were successfully fabricated on the intermixed samples. Our results show that this new QWI method technique may pave the way for the realization of high-efficiency orange and yellow light-emitting devices based on the InGaP/InAlGaP material system.

Variable magnification dual lens electron holography for semiconductor junction profiling and strain mapping

Energy Technology Data Exchange (ETDEWEB)

Wang, Y.Y., E-mail: wangyy@us.ibm.com [IBM Micro-electronics Division, Zip 40E, Hudson Valley Research Park, 2070 Route 52, Hopewell Junction, NY 12533 (United States); Li, J.; Domenicucci, A. [IBM Micro-electronics Division, Zip 40E, Hudson Valley Research Park, 2070 Route 52, Hopewell Junction, NY 12533 (United States); Bruley, J. [IBM TJ Watson Research Center, 1101 Kitchawan Road, Route 134 Yorktown Heights, NY 10598 (United States)

2013-01-15

Dual lens operation for electron holography, which was developed previously (Wang et al., Ultramicroscopy 101 (2004) 63-72; US patent: 7,015,469 B2 (2006)), is re-investigated for bright field (junction profiling) and dark field (strain mapping) electron holography using FEI instrumentation (i.e. F20 and Titan). It is found that dual lens operation provides a wide operational range for electron holography. In addition, the dark field image tilt increases at high objective lens current to include Si Left-Pointing-Angle-Bracket 0 0 4 Right-Pointing-Angle-Bracket diffraction spot. Under the condition of high spatial resolution (1 nm fringe spacing), a large field of view (450 nm), and high fringe contrast (26%) with dual lens operation, a junction map is obtained and strain maps of Si device on Left-Pointing-Angle-Bracket 2 2 0 Right-Pointing-Angle-Bracket and Left-Pointing-Angle-Bracket 0 0 4 Right-Pointing-Angle-Bracket diffraction are acquired. In this paper, a fringe quality number, N Prime , which is number of fringe times fringe contrast, is proposed to estimate the quality of an electron hologram and mathematical reasoning for the N Prime number is provided. -- Highlights: Black-Right-Pointing-Pointer Dual lens electron holography is implemented on FEI instruments (Titan and F20). Black-Right-Pointing-Pointer Wide range of field of view (0.1-0.9 {mu}m) and fringe spacing (0.5-6 nm) is achieved. Black-Right-Pointing-Pointer Fringe quality number is proposed to quantify the quality of an electron hologram. Black-Right-Pointing-Pointer Junction map at high spatial resolution is provided. Black-Right-Pointing-Pointer Strain maps along Left-Pointing-Angle-Bracket 2 2 0 Right-Pointing-Angle-Bracket and Left-Pointing-Angle-Bracket 0 0 4 Right-Pointing-Angle-Bracket direction of Si by dark field electron holography are reported.

Quilamine HQ1-44, an iron chelator vectorized toward tumor cells by the polyamine transport system, inhibits HCT116 tumor growth without adverse effect.

Science.gov (United States)

Renaud, Stéphanie; Corcé, Vincent; Cannie, Isabelle; Ropert, Martine; Lepage, Sylvie; Loréal, Olivier; Deniaud, David; Gaboriau, François

2015-08-01

Tumor cell growth requires large iron quantities and the deprivation of this metal induced by synthetic metal chelators is therefore an attractive method for limiting the cancer cell proliferation. The antiproliferative effect of the Quilamine HQ1-44, a new iron chelator vectorized toward tumor cells by a polyamine chain, is related to its high selectivity for the Polyamine Transport System (PTS), allowing its preferential uptake by tumoral cells. The difference in PTS activation between healthy cells and tumor cells enables tumor cells to be targeted, whereas the strong dependence of these cells on iron ensures a secondary targeting. Here, we demonstrated in vitro that HQ1-44 inhibits DNA synthesis and cell proliferation of HCT116 cells by modulating the intracellular metabolism of both iron and polyamines. Moreover, in vivo, in xenografted athymic nude mice, we found that HQ1-44 was as effective as cis-platin in reducing HCT116 tumor growth, without its side effects. Furthermore, as suggested by in vitro data, the depletion in exogenous or endogenous polyamines, known to activate the PTS, dramatically enhanced the antitumor efficiency of HQ1-44. These data support the need for further studies to assess the value of HQ1-44 as an adjuvant treatment in cancer. Copyright © 2015 Elsevier Inc. All rights reserved.

Comprehensive sieve analysis of breakthrough HIV-1 sequences in the RV144 vaccine efficacy trial.

Science.gov (United States)

Edlefsen, Paul T; Rolland, Morgane; Hertz, Tomer; Tovanabutra, Sodsai; Gartland, Andrew J; deCamp, Allan C; Magaret, Craig A; Ahmed, Hasan; Gottardo, Raphael; Juraska, Michal; McCoy, Connor; Larsen, Brendan B; Sanders-Buell, Eric; Carrico, Chris; Menis, Sergey; Kijak, Gustavo H; Bose, Meera; Arroyo, Miguel A; O'Connell, Robert J; Nitayaphan, Sorachai; Pitisuttithum, Punnee; Kaewkungwal, Jaranit; Rerks-Ngarm, Supachai; Robb, Merlin L; Kirys, Tatsiana; Georgiev, Ivelin S; Kwong, Peter D; Scheffler, Konrad; Pond, Sergei L Kosakovsky; Carlson, Jonathan M; Michael, Nelson L; Schief, William R; Mullins, James I; Kim, Jerome H; Gilbert, Peter B

2015-02-01

The RV144 clinical trial showed the partial efficacy of a vaccine regimen with an estimated vaccine efficacy (VE) of 31% for protecting low-risk Thai volunteers against acquisition of HIV-1. The impact of vaccine-induced immune responses can be investigated through sieve analysis of HIV-1 breakthrough infections (infected vaccine and placebo recipients). A V1/V2-targeted comparison of the genomes of HIV-1 breakthrough viruses identified two V2 amino acid sites that differed between the vaccine and placebo groups. Here we extended the V1/V2 analysis to the entire HIV-1 genome using an array of methods based on individual sites, k-mers and genes/proteins. We identified 56 amino acid sites or "signatures" and 119 k-mers that differed between the vaccine and placebo groups. Of those, 19 sites and 38 k-mers were located in the regions comprising the RV144 vaccine (Env-gp120, Gag, and Pro). The nine signature sites in Env-gp120 were significantly enriched for known antibody-associated sites (p = 0.0021). In particular, site 317 in the third variable loop (V3) overlapped with a hotspot of antibody recognition, and sites 369 and 424 were linked to CD4 binding site neutralization. The identified signature sites significantly covaried with other sites across the genome (mean = 32.1) more than did non-signature sites (mean = 0.9) (p analysis of the breakthrough infections in the RV144 trial, this work describes a set of statistical methods and tools applicable to analysis of breakthrough infection genomes in general vaccine efficacy trials for diverse pathogens.

Variable magnification dual lens electron holography for semiconductor junction profiling and strain mapping.

Science.gov (United States)

Wang, Y Y; Li, J; Domenicucci, A; Bruley, J

2013-01-01

Dual lens operation for electron holography, which was developed previously (Wang et al., Ultramicroscopy 101 (2004) 63-72; US patent: 7,015,469 B2 (2006)), is re-investigated for bright field (junction profiling) and dark field (strain mapping) electron holography using FEI instrumentation (i.e. F20 and Titan). It is found that dual lens operation provides a wide operational range for electron holography. In addition, the dark field image tilt increases at high objective lens current to include Si diffraction spot. Under the condition of high spatial resolution (1 nm fringe spacing), a large field of view (450 nm), and high fringe contrast (26%) with dual lens operation, a junction map is obtained and strain maps of Si device on and diffraction are acquired. In this paper, a fringe quality number, N', which is number of fringe times fringe contrast, is proposed to estimate the quality of an electron hologram and mathematical reasoning for the N' number is provided. Copyright © 2012 Elsevier B.V. All rights reserved.

Electron transport in gold colloidal nanoparticle-based strain gauges

Science.gov (United States)

Moreira, Helena; Grisolia, Jérémie; Sangeetha, Neralagatta M.; Decorde, Nicolas; Farcau, Cosmin; Viallet, Benoit; Chen, Ke; Viau, Guillaume; Ressier, Laurence

2013-03-01

A systematic approach for understanding the electron transport mechanisms in resistive strain gauges based on assemblies of gold colloidal nanoparticles (NPs) protected by organic ligands is described. The strain gauges were fabricated from parallel micrometer wide wires made of 14 nm gold (Au) colloidal NPs on polyethylene terephthalate substrates, elaborated by convective self-assembly. Electron transport in such devices occurs by inter-particle electron tunneling through the tunnel barrier imposed by the organic ligands protecting the NPs. This tunnel barrier was varied by changing the nature of organic ligands coating the nanoparticles: citrate (CIT), phosphines (BSPP, TDSP) and thiols (MPA, MUDA). Electro-mechanical tests indicate that only the gold NPs protected by phosphine and thiol ligands yield high gauge sensitivity. Temperature-dependent resistance measurements are explained using the ‘regular island array model’ that extracts transport parameters, i.e., the tunneling decay constant β and the Coulomb charging energy EC. This reveals that the Au@CIT nanoparticle assemblies exhibit a behavior characteristic of a strong-coupling regime, whereas those of Au@BSPP, Au@TDSP, Au@MPA and Au@MUDA nanoparticles manifest a weak-coupling regime. A comparison of the parameters extracted from the two methods indicates that the most sensitive gauges in the weak-coupling regime feature the highest β. Moreover, the EC values of these 14 nm NPs cannot be neglected in determining the β values.

An oxygen dependent X-ray lesion in Escherichia coli strain B/r detected by penicillin

International Nuclear Information System (INIS)

Gillies, N.E.; Obioha, F.I.; Ratnajothi, N.H.

1979-01-01

Enhancement of lethal damage to E. coli B/r by penicillin was observed after X-irradiation under aerobic conditions, but not after exposure to X-rays under anoxia or after U.V. (260 nm) irradiation. No enhancement of damage occurred when incubation with penicillin was delayed for 2 hours after aerobic X-irradiation. This enhancing effect was only detected in this strain and not in the filamentous strain E. coli B. It was concluded that an X-ray induced lesion, sensitive to the presence of oxygen at the time of irradiation and probably located in the cell envelope, initiates filamentation in E. coli B/r, which results in lethal damage in this strain. (author)

Remarkable strain-induced magnetic anisotropy in epitaxial Co2MnGa (0 0 1) films

International Nuclear Information System (INIS)

Pechan, Michael J.; Yu, Chengtao; Carr, David; Palmstroem, Chris J.

2005-01-01

Remarkably large, strain-induced anisotropy is observed in the thin-film Heusler alloy Co 2 MnGa. 30 nm Co 2 MnGa (0 0 1) films have been epitaxially grown on different interlayers/substrates with varied strain, and investigated with ferromagnetic resonance. The film grown on ErAs/InGaAs/InP experiences tension strain, resulting in an out-of-plane strain-induced anisotropy (∼1.1x10 6 erg/cm 3 ) adding to the effects of shape anisotropy. In contrast, the film grown on ScErAs/GaAs, experiences a compression strain, resulting in an out-of-plane strain-induced anisotropy (∼3.3x10 6 erg/cm 3 ) which almost totally cancels the effects of shape anisotropy, thus rendering the film virtually isotropic. This results in the formation of stripe domains in remanence. In addition, small, but well-defined 2-fold and 4-fold in-plane anisotropy coexist in each sample with weak, but interesting strain dependence. Transport measurement shows small (<1%) magnetoresistance effects in the compression film, but negligible magnetoresistance in the relaxed and tension strained samples

Optical properties of InGaAs/InGaAlAs quantum wells for the 1520–1580 nm spectral range

Energy Technology Data Exchange (ETDEWEB)

Gladyshev, A. G., E-mail: andrey.gladyshev@connector-optics.com; Novikov, I. I.; Karachinsky, L. Ya.; Denisov, D. V. [Connector Optics OOO (Russian Federation); Blokhin, S. A.; Blokhin, A. A.; Nadtochiy, A. M. [Russian Academy of Sciences, Ioffe Physical–Technical Institute (Russian Federation); Kurochkin, A. S. [St. Petersburg National Research University of Information Technologies, Mechanics, and Optics (Russian Federation); Egorov, A. Yu. [Connector Optics OOO (Russian Federation)

2016-09-15

The optical properties of elastically strained semiconductor heterostructures with InGaAs/InGaAlAs quantum wells (QWs), intended for use in the formation of the active region of lasers emitting in the spectral range 1520–1580 nm, are studied. Active regions with varied lattice mismatch between the InGaAs QWs and the InP substrate are fabricated by molecular beam epitaxy. The maximum lattice mismatch for the InGaAs QWs is +2%. The optical properties of the elastically strained InGaAlAs/InGaAs/InP heterostructures are studied by the photoluminescence method in the temperature range from 20 to 140°C at various power densities of the excitation laser. Investigation of the optical properties of InGaAlAs/InGaAs/InP experimental samples confirms the feasibility of using the developed elastically strained heterostructures for the fabrication of active regions for laser diodes with high temperature stability.

Characterization of LANDSAT Panels Using the NIST BRDF Scale from 1100 nm to 2500 nm

Science.gov (United States)

Markham, Brian; Tsai, Benjamin K.; Allen, David W.; Cooksey, Catherine; Yoon, Howard; Hanssen, Leonard; Zeng, Jinan; Fulton, Linda; Biggar, Stuart; Markham, Brian

2010-01-01

Many earth observing sensors depend on white diffuse reflectance standards to derive scales of radiance traceable to the St Despite the large number of Earth observing sensors that operate in the reflective solar region of the spectrum, there has been no direct method to provide NIST traceable BRDF measurements out to 2500 rim. Recent developments in detector technology have allowed the NIST reflectance measurement facility to expand the operating range to cover the 250 nm to 2500 nm range. The facility has been modified with and additional detector using a cooled extended range indium gallium arsenide (Extended InGaAs) detector. Measurements were made for two PTFE white diffuse reflectance standards over the 1100 nm to 2500 nm region at a 0' incident and 45' observation angle. These two panels will be used to support the OLI calibration activities. An independent means of verification was established using a NIST radiance transfer facility based on spectral irradiance, radiance standards and a diffuse reflectance plaque. An analysis on the results and associated uncertainties will be discussed.

Size and strain tunable band alignment of black-blue phosphorene lateral heterostructures.

Science.gov (United States)

Li, Yan; Ma, Fei

2017-05-17

Single-element lateral heterostructures composed of black and blue phosphorene are not only free from lattice mismatch but also exhibit rich physical properties related to the seamlessly stitched interfaces, providing the building blocks for designing atomically thin devices. Using first-principles calculations, we investigate the influence of interface structure, size effect and strain engineering on the electronic structure, effective masses and band alignment of black-blue phosphorene lateral heterostructures. The lateral heterostructure with an octatomic-ring interface presents a strong metallic feature due to the interface states, while a metal-semiconductor transition takes place in the system with a hexatomic-ring interface upon hydrogen passivation. Following a reciprocal scaling law, the band gap is tuned in a wide energy range by synchronously increasing the widths of black and blue phosphorene or by only widening that of black phosphorene. Moreover, type-II band alignment is observed in the width ranges of 2.0-3.1 nm and 3.7-4.2 nm, out of which it is type-I. However, the band gap and effective masses show small changes if only the width of blue phosphorene is altered. When the lateral heterostructure is tensile loaded, the effective mass ratio of hole to electron is enlarged by an order of magnitude at a strain of 4% along the zigzag direction. Meanwhile, the band alignment undergoes a crossover from type-I to type-II at a strain of 2%, facilitating efficient electron-hole separation for light detection and harvesting.

Photosensitivity mechanism of undoped poly(methyl methacrylate) under UV radiation at 325 nm and its spatial resolution limit

DEFF Research Database (Denmark)

Sáez-Rodríguez, D.; Nielsen, Kristian; Bang, Ole

2014-01-01

that increasing strain during photo-inscription leads to an increased photosensitivity, which is evidence of photodegradation. Likewise, refractive index change in the fiber was measured to be positive, which provides evidence for further polymerization of the material. Finally, we relate the data obtained......In this Letter, we provide evidence suggesting that the main photosensitive mechanism of an undoped poly(methyl methacrylate)-based microstructured optical fiber under UV radiation at 325 nm is a competitive process of both photodegradation and polymerization. We found experimentally...

JUNE ISSUE 2008 FINAL.cdr

African Journals Online (AJOL)

Bowel motions were watery, non-mucoid, non-bloody and not associated with fever or abdominal pain. He presented in ... episodes of diarrhoea after eating at similar ... Some of these risk factors are ... Necrotising colitis in patients with cancer.

Brain cystogenesis capacity of Toxoplasma gondii, avirulent Tehran strain in mice

Directory of Open Access Journals (Sweden)

Mehrzad Saraei

2014-09-01

Full Text Available Objective: To investigate the brain cystogenesis capacity of Tehran strain of Toxoplasma gondii (T. gondii that had been isolated from a patient with lymphadenitis in 1973. Methods: A volume of 0.5 mL mice brain suspension containing 20 tissue cysts of Tehran strain of T. gondii was inoculated intraperitoneally to each of 25 male BALB/c mice. The number of brain cysts was counted in unstained squash-smears for 10 mice during weeks 7-9 and for 15 mice during weeks 13-14 post-infection. Nonparametric test of Mann-Whitney was used to demonstrate means differences. Results: There was a significant difference in the means for the number of brain cysts between weeks 7-9 (228.3依144.8 and weeks 13-14 (1 239.8依429.3 post-infection (P<0.05. The minimum and the maximum of cysts were 70 and 1 531 during weeks 7-9 post-infection, and 12 and 5 170 during weeks 13-14 post-infection, respectively. The mean number of brain cysts in the right cerebral hemisphere was insignificantly higher than that of the left cerebral hemisphere. Furthermore, the number of cysts counted in the right or the left hemispheres was significantly higher than those enumerated for cerebellum+brain stem altogether. Conclusions: It is concluded that the brain cystogenesis capacity of T. gondii, Tehran strain shows enormous variation in mice regarding the duration of infection. In addition, the cystogenesis observed in cerebellum+brain stem is lower than the right and left cerebral hemispheres.

Strain effect on the magnetic and transport properties of LaCoO3 thin films

Science.gov (United States)

Li, Y.; Peng, S. J.; Wang, D. J.; Wu, K. M.; Wang, S. H.

2018-05-01

LaCoO3 (LCO) has attracted much attention due to the unique magnetic transition and spin transition of Co3+ ions. Epitaxial LCO film exhibits an unexpected ferromagnetism, in contrast to the non-magnetism of bulk LCO. An in-depth study on the property of strained LCO film is of great importance. We have fabricated 30 nm LCO films on various substrates and studied the magnetic and transport properties of films in different strain states (compressed strain for LCO/LaAlO3, tensile strain for LCO/(LaAlO3)0.3(Sr2TaAlO6)0.35, SrTiO3). The in-plane tensiled LCO films exhibit ferromagnetic ground state at 5K and magnetic transition with TC around 85K, while compressed LCO/LaAlO3 film has a negligibly small moment signal. Our results reveal that in-plane tensile strain and tetragonal distortion are much more favorable for stabilizing the FM order in LCO films.

Magnetic Susceptibility of liquid Gd-NM (NM = Cu, Ga, Ge alloys

Directory of Open Access Journals (Sweden)

Shimakura Hironori

2017-01-01

Full Text Available For rare earth alloys, the indirect interaction of RKKY is at work between rare-earth atoms. Therefore, the magnetism of them depends on the number of conduction electrons and the distance between rare-earth metals. In this work, to reveal the relationship between the number of conduction electrons and magnetic property of rare earth metal alloys, magnetic susceptibility measurements for liquid Gd-NM (NM = Cu, Ga, Ge was performed by Faraday method. As the results, it was observed that the sign of paramagnetic Curie temperature of Cu-Gd alloys are positive at all composition, while Ga-Gd and Ge-Gd alloys show negative paramagnetic Curie temperature at certain composition. Moreover, it was indicated when the alloy at certain composition shows highest melting temperature, it has the lowest paramagnetic Curie temperature.

Use of first-order diffraction wavelengths corresponding to dual-grating periodicities in a single fibre Bragg grating for simultaneous temperature and strain measurement

International Nuclear Information System (INIS)

Yam, Sui P; Brodzeli, Zourab; Rollinson, Claire M; Baxter, Greg W; Collins, Stephen F; Wade, Scott A

2009-01-01

A fibre Bragg grating (FBG) sensor, fabricated using a phase mask with 536 nm uniform pitch, for simultaneous temperature and strain measurement is presented. Two peaks/dips occur, at 785 and 1552 nm, due to reflection/transmission at the Bragg wavelength and at twice the Bragg wavelength, and arising primarily from FBG periodicities associated with half the phase mask periodicity and the phase mask periodicity, respectively. This grating was simple to fabricate and by having greater reflectivity at 785 nm, compared with 1552 nm, it is better suited for long-distance operation compared with similar schemes where the greater fibre attenuation at 785 nm is a significant limitation

Strain relaxation studies of the Fe3O4/MgO (100) heteroepitaxial system grown by magnetron sputtering

International Nuclear Information System (INIS)

Balakrishnan, K; Arora, S K; Shvets, I V

2004-01-01

Detailed strain relaxation studies of epitaxial magnetite, Fe 3 O 4 , films on MgO(100) substrates grown by magnetron sputtering reveal the accommodation of strain up to 600 nm thickness, a thickness far above the critical thickness (t c ) predicted by theoretical models. The results are in agreement with the suggestion that the excess strain in Fe 3 O 4 /MgO (100) heteroepitaxy is accommodated by the presence of antiphase boundaries. The compressive strain generated by the antiphase boundaries compensates for the tensile strain within the growth islands, allowing the film to remain fully coherent with the substrate. Contrary to earlier findings, magnetization decreases with an increase in the film thickness. This vindicates the view that the structure of the antiphase boundaries depends on the growth conditions

Biofabrication, characterization and antibacterial efficacy of extracellular silver nanoparticles using novel fungal strain of Penicillium atramentosum KM

Directory of Open Access Journals (Sweden)

Vikas Sarsar

2015-11-01

Full Text Available The biofabricated silver nanoparticles are extensively used in environmental, biotechnological and biomedical applications. The synthesis of SNPs has been carried out by using the filtrate extract of novel fungal strain Penicillium atramentosum KM. To undertake this study, P. atramentosum KM extract was exposed to silver nitrate and the obtained SNPs were thoroughly analyzed using physicochemical characterization tools such as UV–visible spectroscopy (UV–vis, Fourier transformation infrared (FTIR, X-ray diffraction (XRD and transmission electron microscopy (TEM. As evident from the FTIR spectra plausibly the protein components of fungal extract caused the reduction of silver nitrate. The SNPs showed a characteristic UV–visible peak at 420 nm with an average size of 5–25 nm. The XRD record exhibited the characteristic peaks of 111, 200, 220 and 311 nanoparticles signifying that these nanoparticles were crystalline in nature. Parametric optimization showed maximum absorbance of 420 nm at pH 7, 25 °C with 3 mM silver nitrate, concentration ratio of fungal extract and silver nitrate was 5:5 in 72 h. The synthesized SNPs showed antimicrobial activity against bacterial strains.

Workloads, strain processes and sickness absenteeism in nursing

Directory of Open Access Journals (Sweden)

Vivian Aline Mininel

2013-12-01

Full Text Available OBJECTIVE: to analyze the workloads, strain processes and sickness absenteeism among nursing workers from a teaching hospital in the Brazilian Central-West. METHOD: a descriptive and cross-sectional study was developed with a quantitative approach, based on the theoretical framework of the social determination of the health-disease process. Data were collected between January and December 2009, based on records of complaints related to occupational exposure among nursing professionals, filed in the software Monitoring System of Nursing Workers' Health. For the sake of statistical analysis, relative and absolute frequencies of the variables and the risk coefficient were considered. RESULTS: 144 notifications of occupational exposure were registered across the analysis period, which represented 25% of the total nursing population at the hospital. The physiological and psychic workloads were the most representative, corresponding to 37% and 36%, respectively. These notifications culminated in 1567 days of absenteeism for disease treatment. CONCLUSIONS: the findings evidence the impact of occupational illnesses on the absenteeism of nursing workers, and can be used to demonstrate the importance of institutional investments in occupational health surveillance.

Laser Application in Dentistry: Irradiation Effects of Nd:YAG 1064 nm and Diode 810 nm and 980 nm in Infected Root Canals—A Literature Overview

Science.gov (United States)

Kuypers, Thorsten; Gutknecht, Norbert

2016-01-01

Objective. In endodontics, Nd:YAG laser (1064 nm) and diode laser (810 nm and 980 nm) devices are used to remove bacteria in infected teeth. A literature review was elaborated to compare and evaluate the advantages and disadvantages of using these lasers. Methods. Using combined search terms, eligible articles were retrieved from PubMed and printed journals. The initial search yielded 40 titles and 27 articles were assigned to full-text analysis. The studies were classified based upon laser source, laser energy level, duration/similarity of application, and initial and final bacterial count at a minimum of 20 prepared root canals. Part of the analysis was only reduced microorganisms and mechanically treated root canals upon preparation size of ISO 30. All studies were compared to evaluate the most favorable laser device for best results in endodontic therapy. Results. A total of 22 eligible studies were found regarding Nd:YAG laser 1064 nm. Four studies fulfilled all demanded criteria. Seven studies referring to the diode laser 980 nm were examined, although only one fulfilled all criteria. Eleven studies were found regarding the diode laser 810 nm, although only one study fulfilled all necessary criteria. Conclusions. Laser therapy is effective in endodontics, although a comparison of efficiency between the laser devices is not possible at present due to different study designs, materials, and equipment. PMID:27462611

Laser Application in Dentistry: Irradiation Effects of Nd:YAG 1064 nm and Diode 810 nm and 980 nm in Infected Root Canals-A Literature Overview.

Science.gov (United States)

Saydjari, Yves; Kuypers, Thorsten; Gutknecht, Norbert

2016-01-01

Objective. In endodontics, Nd:YAG laser (1064 nm) and diode laser (810 nm and 980 nm) devices are used to remove bacteria in infected teeth. A literature review was elaborated to compare and evaluate the advantages and disadvantages of using these lasers. Methods. Using combined search terms, eligible articles were retrieved from PubMed and printed journals. The initial search yielded 40 titles and 27 articles were assigned to full-text analysis. The studies were classified based upon laser source, laser energy level, duration/similarity of application, and initial and final bacterial count at a minimum of 20 prepared root canals. Part of the analysis was only reduced microorganisms and mechanically treated root canals upon preparation size of ISO 30. All studies were compared to evaluate the most favorable laser device for best results in endodontic therapy. Results. A total of 22 eligible studies were found regarding Nd:YAG laser 1064 nm. Four studies fulfilled all demanded criteria. Seven studies referring to the diode laser 980 nm were examined, although only one fulfilled all criteria. Eleven studies were found regarding the diode laser 810 nm, although only one study fulfilled all necessary criteria. Conclusions. Laser therapy is effective in endodontics, although a comparison of efficiency between the laser devices is not possible at present due to different study designs, materials, and equipment.

Engineering of nearly strain-free ZnO films on Si(1 1 1) by tuning AlN buffer thickness

International Nuclear Information System (INIS)

Venkatachalapathy, Vishnukanthan; Galeckas, Augustinas; Lee, In-Hwan; Kuznetsov, Andrej Yu.

2012-01-01

ZnO properties were investigated as a function of AlN buffer layer thickness (0–100 nm) in ZnO/AlN/Si(1 1 1) structures grown by metal organic vapor phase epitaxy. A significant improvement of ZnO film crystallinity by tuning AlN buffer thickness was confirmed by x-ray diffraction, topography and photoluminescence measurements. An optimal AlN buffer layer thickness of 50 nm is defined, which allows for growth of nearly strain-free ZnO films. The presence of free excitons at 10 K suggests high crystal quality for all ZnO samples grown on AlN/Si(1 1 1) templates. The intensities of neutral and ionized donor bound exciton lines are found to correlate with the in-plane and out-of-plane strain in the films, respectively.

Engineering of nearly strain-free ZnO films on Si(1 1 1) by tuning AlN buffer thickness

Energy Technology Data Exchange (ETDEWEB)

Venkatachalapathy, Vishnukanthan, E-mail: vishnukanthan.venkatachalapathy@smn.uio.no [Department of Physics/Centre for Materials Science and Nanotechnology, University of Oslo, P.O. Box 1048 Blindern, NO-0316 Oslo (Norway); Galeckas, Augustinas [Department of Physics/Centre for Materials Science and Nanotechnology, University of Oslo, P.O. Box 1048 Blindern, NO-0316 Oslo (Norway); Lee, In-Hwan [School of Advanced Materials Engineering, Research Centre for Advanced Materials Development (RCAMD), Chonbuk National University, Jeonju 561-756 (Korea, Republic of); Kuznetsov, Andrej Yu. [Department of Physics/Centre for Materials Science and Nanotechnology, University of Oslo, P.O. Box 1048 Blindern, NO-0316 Oslo (Norway)

2012-05-15

ZnO properties were investigated as a function of AlN buffer layer thickness (0-100 nm) in ZnO/AlN/Si(1 1 1) structures grown by metal organic vapor phase epitaxy. A significant improvement of ZnO film crystallinity by tuning AlN buffer thickness was confirmed by x-ray diffraction, topography and photoluminescence measurements. An optimal AlN buffer layer thickness of 50 nm is defined, which allows for growth of nearly strain-free ZnO films. The presence of free excitons at 10 K suggests high crystal quality for all ZnO samples grown on AlN/Si(1 1 1) templates. The intensities of neutral and ionized donor bound exciton lines are found to correlate with the in-plane and out-of-plane strain in the films, respectively.

The effects of strain relaxation on the dielectric properties of epitaxial ferroelectric Pb(Zr0.2Ti0.8)TiO3 thin films

Science.gov (United States)

Khan, Asif Islam; Yu, Pu; Trassin, Morgan; Lee, Michelle J.; You, Long; Salahuddin, Sayeef

2014-07-01

We study the effects of strain relaxation on the dielectric properties of epitaxial 40 nm Pb(Zr0.2Ti0.8)TiO3 (PZT) films. A significant increase in the defect and dislocation density due to strain relaxation is observed in PZT films with tetragonality c/a fatigue in ferroelectric materials.

Quasi-elastic Scattering Measurements in the 6,7Li+144Sm Systems

International Nuclear Information System (INIS)

Capurro, O. A.; Arazi, A.; Fernandez Niello, J. O.; Figueira, J. M.; Marti, G. V.; Martinez Heimann, D.; Negri, A. E.; Pacheco, A. J.; Monteiro, D. S.; Otomar, D. R.; Gomes, P. R. S.; Guimaraes, V.

2009-01-01

In the present work, results of measurements of quasi-elastic scattering cross sections using a silicon-telescope detector at backward angles are reported. They allowed us to deduce fusion barrier distributions from the first derivative of the corresponding excitation function (-d(dσ qes /dσ Rut )/dE). We report data for the systems 6,7 Li on 144 Sm which are characterized by loosely bound projectiles onto a closed neutron shell target. The experimental excitation functions and the associated barrier distributions are compared for both systems.

Complete genome sequence of Actinosynnema mirum type strain (101T)

Energy Technology Data Exchange (ETDEWEB)

Land, Miriam; Lapidus, Alla; Mayilraj, Shanmugam; Chen, Feng; Copeland, Alex; Glavina Del Rio, Tijana; Nolan, Matt; Lucas, Susan; Tice, Hope; Cheng, Jan-Fang; Chertkov, Olga; Bruce, David; Goodwin, Lynne; Pitluck, Sam; Rohde, Manfred; Goker, Markus; Pati, Amrita; Ivanova, Natalia; Mavrommatis, Konstantinos; Chen, Amy; Palaniappan, Krishna; Hauser, Loren; Chang, Yun-Juan; Jefferies, Cynthia; Brettin, Thomas; Detter, John C.; Han, Cliff; Chain, Patrick; Tindall, Brian; Bristow, James; Eisen, Jonathan A.; Markowitz, Victor; Hugenholtz, Philip; Kyrpides, Nikos C.; Klenk, Hans-Peter

2009-05-20

Actinosynnema mirum Hasegawa et al. 1978 is the type species of the genus, and is of phylogenetic interest because of its central phylogenetic location in the Actino-synnemataceae, a rapidly growing family within the actinobacterial suborder Pseudo-nocardineae. A. mirum is characterized by its motile spores borne on synnemata and as a producer of nocardicin antibiotics. It is capable of growing aerobically and under a moderate CO2 atmosphere. The strain is a Gram-positive, aerial and substrate mycelium producing bacterium, originally isolated from a grass blade collected from the Raritan River, New Jersey. Here we describe the features of this organism, together with the complete genome sequence and annotation. This is the first complete genome sequence of a member of the family Actinosynnemataceae, and only the second sequence from the actinobacterial suborder Pseudonocardineae. The 8,248,144 bp long single replicon genome with its 7100 protein-coding and 77 RNA genes is part of the Genomic Encyclopedia of Bacteria and Archaea project.

Macular autofluorescence in eyes with cystoid macula edema, detected with 488 nm-excitation but not with 580 nm-excitation.

Science.gov (United States)

Bessho, Kenichiro; Gomi, Fumi; Harino, Seiyo; Sawa, Miki; Sayanagi, Kaori; Tsujikawa, Motokazu; Tano, Yasuo

2009-06-01

Fundus autofluorescence (AF) derives from lipofuscin in the retinal pigment epithelium (RPE). Because lipofuscin is a by-product of phagocytosis of photoreceptors by RPE, AF imaging is expected to describe some functional aspect of the retina. In this study we report distribution of AF in patients showing macular edema. Three eyes with diabetic macular edema (DME) and 11 with retinal vein occlusion (RVO), associated with macular edema (ME) were examined. ME was determined by standard fundus examination, fluorescein angiography (FA) and optical coherence tomography (OCT). AF was recorded using a Heidelberg confocal scanning laser ophthalmoscope (cSLO) with 488 nm laser exciter (488 nm-AF), and a conventional Topcon fundus camera with halogen lamp exciter and 580 nm band-pass filter (580 nm-AF). Color fundus picture, FA image and these two AF images were analyzed by superimposing all images. All subjects presented cystoid macular edema (CME) with petaloid pattern hyperfluorescence in FA. In 488 nm-AF, all eyes (100%) showed macular autofluorescence of a similar shape to that of the CME in FA. In contrast, in 580 nm-AF only one eye (7%) presented this corresponding petaloid-shaped autofluorescence. In all cases, peripheral retinal edemas did not show autofluorescence corresponding to the leakage in FA. In eyes with CME, analogous hyperautofluorescence to the CME was always observed in 488 nm-AF, while it was rarely observed in 580 nm-AF. Moreover, this CME hyperautofluorescence was only seen in the macular area. We hypothesize that autofluorescence from CME may be considered as a "pseudo" or "relative" autofluorescence, due to macular stretching following CME that may result in lateral displacement of macular pigments (MPs) and subsequent reduction of MPs density, as MPs block 488 nm-AF more intensely than 580 nm-AF. Although this phenomenon may not directly indicate change of RPE function, it may be used as a method to assess or track CME non-invasively.

The analysis of strain of giant magnetoresistive Pr0.7Sr0.3MnO3/La0.5Ca0.5MnO3/Pr0.7Sr0.3MnO-3 trilayers

International Nuclear Information System (INIS)

Wang Haiou; Liu Hao; Dai Ping; Tan Weishi; Wu Xiaoshan; Jia Quanjie; Li Xiaolong

2012-01-01

Pr 0.7 Sr 0.3 MnO 3 /La 0.5 Ca 0.5 MnO 3 /Pr 0.7 Sr 0.3 MnO 3 (PSMO/LCMO/PSMO) trilayers were deposited on (001)-oriented single crystal MgO by pulsed laser deposition. The thickness of both PSMO layers was 36 nm while the thickness of LCMO layer was 6, 12, 18, 24, 30 and 36 nm, respectively. Out-of-plane and in-plane lattice parameters of trilayers were obtained by using symmetric scanning and asymmetric scanning mode of high resolution X-ray diffraction. Strain states of trilayers have been studied. The results showed that strain relaxation states of trilayers were decided by bulk strain and Jahn-Teller (JT) strain together: The mechanism for strain relaxation in trilayers is different from that for tetragonal distortion. The competition between bulk strain and Jahn-Teller (JT) strain played an important role in the magnetotransport and magnetic properties of trilayers. (authors)

Strain compensation in InGaN-based multiple quantum wells using AlGaN interlayers

Directory of Open Access Journals (Sweden)

Syed Ahmed Al Muyeed

2017-10-01

Full Text Available Data are presented on strain compensation in InGaN-based multiple quantum wells (MQW using AlGaN interlayers (ILs. The MQWs consist of five periods of InxGa1-xN/AlyGa1-yN/GaN emitting in the green (λ ∼ 535 nm ± 15 nm, and the AlyGa1-yN IL has an Al composition of y = 0.42. The IL is varied from 0 - 2.1 nm, and the relaxation of the MQW with respect to the GaN template layer varies with IL thickness as determined by reciprocal space mapping about the (202¯5 reflection. The minimum in the relaxation occurs at an interlayer thickness of 1 nm, and the MQW is nearly pseudomorphic to GaN. Both thinner and thicker ILs display increased relaxation. Photoluminescence data shows enhanced spectral intensity and narrower full width at half maximum for the MQW with 1 nm thick ILs, which is a product of pseudomorphic layers with lower defect density and non-radiative recombination.

Schedules of controlled substances: extension of temporary placement of UR-144, XLR11, and AKB48 in schedule I of the Controlled Substances Act. Final order.

Science.gov (United States)

2015-05-15

The Administrator of the Drug Enforcement Administration (DEA) is issuing this final order to extend the temporary placement of (1-pentyl-1H-indol-3-yl)(2,2,3,3-tetramethylcyclopropyl)methanone (UR-144), [1-(5-fluoro-pentyl)-1H-indol-3-yl](2,2,3,3-tetramethylcyclopropyl)methanone (5-fluoro-UR-144, XLR11) and N-(1-adamantyl)-1-pentyl-1H-indazole-3-carboxamide (APINACA, AKB48), including their salts, isomers, and salts of isomers whenever the existence of such salts, isomers, and salts of isomers is possible, in schedule I of the Controlled Substances Act. The current final order temporarily placing UR-144, XLR11, and AKB48 in schedule I is due to expire on May 15, 2015. This final order will extend the temporary scheduling of UR-144, XLR11, and AKB48 to May 15, 2016, or until the permanent scheduling action for these three substances is completed, whichever occurs first.

Monolithic PM Raman fiber laser at 1679 nm for Raman amplification at 1810 nm

DEFF Research Database (Denmark)

Svane, Ask Sebastian; Rottwitt, Karsten

2013-01-01

Stimulated Raman scattering (SRS) has been subject to much attention within the field of fiber lasers and amplifiers as it provides an extended wavelength coverage in comparison to rare-earth based devices. Motivated by the projected capacity crunch [1], different approaches are being explored...... demonstrate a monolithic RM Raman fiber laser (RFL), which acts as a pump for a Raman amplifier (RA) at 1810 nm. The lasing wavelength of a RFL, thus also for a RA, can in principle be designed arbitrarily within the entire wavelength range from the Erbium band up to the Thulium/Holmium band...... of OFS PM Raman fiber, with an estimated propagation loss of 0.42/0.46/1.3 dB/km at 1564/1679/1810 nm. The Raman gain coefficient was measured to be gR=2.66/2.35 W-1km-1 at 1679/1810 nm. The laser curve of the RFL is depicted in Fig. 1b, with a slope efficiency of 67 %. The high slope efficiency...

308nm Excimer Laser in Dermatology

Science.gov (United States)

Mehraban, Shadi

2014-01-01

308nm xenon-chloride excimer laser, a novel mode of phototherapy, is an ultraviolet B radiation system consisting of a noble gas and halide. The aim of this systematic review was to investigate the literature and summarize all the experiments, clinical trials and case reports on 308-nm excimer laser in dermatological disorders. 308-nm excimer laser has currently a verified efficacy in treating skin conditions such as vitiligo, psoriasis, atopic dermatitis, alopecia areata, allergic rhinitis, folliculitis, granuloma annulare, lichen planus, mycosis fungoides, palmoplantar pustulosis, pityriasis alba, CD30+ lympho proliferative disorder, leukoderma, prurigo nodularis, localized scleroderma and genital lichen sclerosus. Although the 308-nm excimer laser appears to act as a promising treatment modality in dermatology, further large-scale studies should be undertaken in order to fully affirm its safety profile considering the potential risk, however minimal, of malignancy, it may impose. PMID:25606333

Isolation and Purification of Complex II from Proteus Mirabilis Strain ATCC 29245

Science.gov (United States)

Shabbiri, Khadija; Ahmad, Waqar; Syed, Quratulain; Adnan, Ahmad

2010-01-01

A respiratory complex was isolated from plasma membrane of pathogenic Proteus mirabilis strain ATCC 29245. It was identified as complex II consisting of succinate:quinone oxidoreductase (EC 1.3.5.1) containing single heme b. The complex II was purified by ion-exchange chromatography and gel filtration. The molecular weight of purified complex was 116.5 kDa and it was composed of three subunits with molecular weights of 19 kDa, 29 kDa and 68.5 kDa. The complex II contained 9.5 nmoles of cytochrome b per mg protein. Heme staining indicated that the 19 kDa subunit was cytochrome b. Its reduced form showed absorptions peaks at 557.0, 524.8 and 424.4 nm. The α-band was shifted from 557.0 nm to 556.8 nm in pyridine ferrohemochrome spectrum. The succinate: quinone oxidoreductase activity was found to be high in this microorganism. PMID:24031557

High-power Al-free active region (λ= 852nm) DFB laser diodes for atomic clocks and interferometry applications

Science.gov (United States)

Ligeret, V.; Vermersch, F.-J.; Bansropun, S.; Lecomte, M.; Calligaro, M.; Parillaud, O.; Krakowski, M.

2017-11-01

Atomic clocks will be used in the future European positioning system Galileo. Among them, the optically pumped clocks provide a better alternative with comparable accuracy for a more compact system. For these systems, diode lasers emitting at 852nm are strategic components. The laser in a conventional bench for atomic clocks presents disadvantages for spatial applications. A better approach would be to realise a system based on a distributed-feedback laser (DFB). We have developed the technological foundations of such lasers operating at 852nm. These include an Al free active region, a single spatial mode ridge waveguide and a DFB structure. The device is a separate confinement heterostructure with a GaInP large optical cavity and a single compressive strained GaInAsP quantum well. The broad area laser diodes are characterised by low internal losses (value of less than 2MHz.

Streptomyces lunalinharesii strain 235 shows the potential to inhibit bacteria involved in biocorrosion processes.

Science.gov (United States)

Pacheco da Rosa, Juliana; Korenblum, Elisa; Franco-Cirigliano, Marcella Novaes; Abreu, Fernanda; Lins, Ulysses; Soares, Rosângela M A; Macrae, Andrew; Seldin, Lucy; Coelho, Rosalie R R

2013-01-01

Four actinomycete strains previously isolated from Brazilian soils were tested for their antimicrobial activity against Bacillus pumilus LF-4 and Desulfovibrio alaskensis NCIMB 13491, bacteria that are well known to be involved in biofilm formation and biocorrosion. Strain 235, belonging to the species Streptomyces lunalinharesii, inhibited the growth of both bacteria. The antimicrobial activity was seen over a wide range of pH, and after treatment with several chemicals and heat but not with proteinase K and trypsin. The antimicrobial substances present in the concentrated supernatant from growth media were partially characterized by SDS-PAGE and extracellular polypeptides were seen. Bands in the size range of 12 to 14.4 kDa caused antimicrobial activity. Transmission electron microscopy of D. alaskensis cells treated with the concentrated supernatant containing the antimicrobial substances revealed the formation of prominent bubbles, the spherical double-layered structures on the cell membrane, and the periplasmic space completely filled with electron-dense material. This is the first report on the production of antimicrobial substances by actinomycetes against bacteria involved in biocorrosion processes, and these findings may be of great relevance as an alternative source of biocides to those currently employed in the petroleum industry.

Cryogenic Lifetime Studies of 130 nm and 65 nm CMOS Technologies for High-Energy Physics Experiments

Energy Technology Data Exchange (ETDEWEB)

Hoff, James R. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Deptuch, G. W. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Wu, Guoying [Southern Methodist Univ., Dallas, TX (United States); Gui, Ping [Southern Methodist Univ., Dallas, TX (United States)

2015-06-04

The Long Baseline Neutrino Facility intends to use unprecedented volumes of liquid argon to fill a time projection chamber in an underground facility. Research is under way to place the electronics inside the cryostat. For reasons of efficiency and economics, the lifetimes of these circuits must be well in excess of 20 years. The principle mechanism for lifetime degradation of MOSFET devices and circuits operating at cryogenic temperatures is hot carrier degradation. Choosing a process technology that is, as much as possible, immune to such degradation and developing design techniques to avoid exposure to such damage are the goals. This, then, requires careful investigation and a basic understanding of the mechanisms that underlie hot carrier degradation and the secondary effects they cause in circuits. In this work, commercially available 130 nm and 65 nm nMOS transistors operating at cryogenic temperatures are investigated. Our results show that both technologies achieve the lifetimes required by the experiment. Minimal design changes are necessary in the case of the 130 nm process and no changes whatsoever are necessary for the 65 nm process.

Application of a whole-body pharmacokinetic model for targeted radionuclide therapy to NM404 and FLT

Science.gov (United States)

Grudzinski, Joseph J.; Floberg, John M.; Mudd, Sarah R.; Jeffery, Justin J.; Peterson, Eric T.; Nomura, Alice; Burnette, Ronald R.; Tomé, Wolfgang A.; Weichert, Jamey P.; Jeraj, Robert

2012-03-01

We have previously developed a model that provides relative dosimetry estimates for targeted radionuclide therapy (TRT) agents. The whole-body and tumor pharmacokinetic (PK) parameters of this model can be noninvasively measured with molecular imaging, providing a means of comparing potential TRT agents. Parameter sensitivities and noise will affect the accuracy and precision of the estimated PK values and hence dosimetry estimates. The aim of this work is to apply a PK model for TRT to two agents with different magnitudes of clearance rates, NM404 and FLT, explore parameter sensitivity with respect to time and investigate the effect of noise on parameter precision and accuracy. Twenty-three tumor bearing mice were injected with a ‘slow-clearing’ agent, 124I-NM404 (n = 10), or a ‘fast-clearing’ agent, 18F-FLT (3‧-deoxy-3‧-fluorothymidine) (n = 13) and imaged via micro-PET/CT pseudo-dynamically or dynamically, respectively. Regions of interest were drawn within the heart and tumor to create time-concentration curves for blood pool and tumor. PK analysis was performed to estimate the mean and standard error of the central compartment efflux-to-influx ratio (k12/k21), central elimination rate constant (kel), and tumor influx-to-efflux ratio (k34/k43), as well as the mean and standard deviation of the dosimetry estimates. NM404 and FLT parameter estimation results were used to analyze model accuracy and parameter sensitivity. The accuracy of the experimental sampling schedule was compared to that of an optimal sampling schedule found using Cramer-Rao lower bounds theory. Accuracy was assessed using correlation coefficient, bias and standard error of the estimate normalized to the mean (SEE/mean). The PK parameter estimation of NM404 yielded a central clearance, kel (0.009 ± 0.003 h-1), normal body retention, k12/k21 (0.69 ± 0.16), tumor retention, k34/k43 (1.44 ± 0.46) and predicted dosimetry, Dtumor (3.47 ± 1.24 Gy). The PK parameter estimation of FLT

Surface and interface strains studied by x-ray diffraction

International Nuclear Information System (INIS)

Akimoto, Koichi; Emoto, Takashi; Ichimiya, Ayahiko

1998-01-01

The authors have developed a technique of X-ray diffraction in order to measure strain fields near semiconductor surface and interface. The diffraction geometry is using the extremely asymmetric Bragg-case bulk reflection of a small incident angle to the surface and a large angle exiting from the surface. The incident angle of the X-rays is set near critical angle of total reflection by tuning X-ray energy of synchrotron radiation at the Photon Factory, Japan. For thermally grown-silicon oxide/Si(100) interface, the X-ray intensity of the silicon substrate 311 reflection has been measured. From comparison of the full width at half maxima (FWHM) of X-ray rocking curves of various thickness of silicon oxides, it has been revealed that silicon substrate lattice is highly strained in the thin (less than about 5 nm) silicon oxide/silicon system. In order to know the original silicon surface strain, the authors have also performed the same kind of measurements in the ultra-high vacuum chamber. A clean Si(111) 7x7 surface gives sharper X-ray diffraction peak than that of the native oxide/Si(111) system. From these measurements, it is concluded that the thin silicon oxide film itself gives strong strain fields to the silicon substrates, which may be the reason of the existence of the structural transition layer at the silicon oxide/Si interface

Development of advanced strain diagnostic techniques for reactor environments.

Energy Technology Data Exchange (ETDEWEB)

Fleming, Darryn D.; Holschuh, Thomas Vernon,; Miller, Timothy J.; Hall, Aaron Christopher; Urrea, David Anthony,; Parma, Edward J.,

2013-02-01

The following research is operated as a Laboratory Directed Research and Development (LDRD) initiative at Sandia National Laboratories. The long-term goals of the program include sophisticated diagnostics of advanced fuels testing for nuclear reactors for the Department of Energy (DOE) Gen IV program, with the future capability to provide real-time measurement of strain in fuel rod cladding during operation in situ at any research or power reactor in the United States. By quantifying the stress and strain in fuel rods, it is possible to significantly improve fuel rod design, and consequently, to improve the performance and lifetime of the cladding. During the past year of this program, two sets of experiments were performed: small-scale tests to ensure reliability of the gages, and reactor pulse experiments involving the most viable samples in the Annulated Core Research Reactor (ACRR), located onsite at Sandia. Strain measurement techniques that can provide useful data in the extreme environment of a nuclear reactor core are needed to characterize nuclear fuel rods. This report documents the progression of solutions to this issue that were explored for feasibility in FY12 at Sandia National Laboratories, Albuquerque, NM.

Capillary Condensation in 8 nm Deep Channels.

Science.gov (United States)

Zhong, Junjie; Riordon, Jason; Zandavi, Seyed Hadi; Xu, Yi; Persad, Aaron H; Mostowfi, Farshid; Sinton, David

2018-02-01

Condensation on the nanoscale is essential to understand many natural and synthetic systems relevant to water, air, and energy. Despite its importance, the underlying physics of condensation initiation and propagation remain largely unknown at sub-10 nm, mainly due to the challenges of controlling and probing such small systems. Here we study the condensation of n-propane down to 8 nm confinement in a nanofluidic system, distinct from previous studies at ∼100 nm. The condensation initiates significantly earlier in the 8 nm channels, and it initiates from the entrance, in contrast to channels just 10 times larger. The condensate propagation is observed to be governed by two liquid-vapor interfaces with an interplay between film and bridging effects. We model the experimental results using classical theories and find good agreement, demonstrating that this 8 nm nonpolar fluid system can be treated as a continuum from a thermodynamic perspective, despite having only 10-20 molecular layers.

Comparison of the ablation ability of nucleus pulposus after 1,064 nm Nd:YAG laser and 980 nm diode laser radiation.

Science.gov (United States)

Yin, Jian; Han, Zhengfeng; Guo, Baofeng; Guo, Han; Zhang, Tongtong; Zeng, Yanjun; Ren, Longxi

2015-07-01

To compare the ablation ability of nucleus pulposus after 1,064 nm Nd:YAG laser and 980 nm diode laser radiation. Goat spine specimen (GSS) was radiated using Nd:YAG laser and 980 nm diode laser and then divided into five groups based on the final energy--200, 400, 600, 800 and 1,000 J groups. The ablation quality of nucleus pulposus after radiation was recorded. The ablation quality of GSS was greater at higher radiation energies in both lasers. When compared at the same energy level, the ablation quality of GSS was greater in 980 nm diode laser than in 1,064 nm Nd:YAG laser. Statistical significance was observed in 200 and 400 J groups (P diode laser showed better ablation ability than 1,064 nm Nd:YAG laser.

PILOT STUDY: Report on the CCPR Pilot Comparison: Spectral Responsivity 10 nm to 20 nm

Science.gov (United States)

Scholze, Frank; Vest, Robert; Saito, Terubumi

2010-01-01

The CCPR Pilot Comparison on spectral responsivity in the 10 nm to 20 nm spectral range was carried out within the framework of the CIPM Mutual Recognition Arrangement by three laboratories: PTB (Germany), NIST (USA), and NMIJ/AIST (Japan) with PTB acting as the central and reporting laboratory. All participating laboratories used monochromatized synchrotron radiation. PTB and NIST used a cryogenic radiometer as the primary standard detector and NMIJ, an ionization chamber with extrapolation by a wavelength-independent detector. The aim of the pilot comparison was to check the accuracy of the radiometric scale of spectral responsivity in the short wavelength EUV spectral range which has recently gained in technological importance. The wavelengths of measurement were from 11.5 nm to 20 nm in 0.5 nm steps and additionally 12.2 nm. The comparison was carried out through the calibration of a group of transfer standard detectors. Two sets of three diodes of types AXUV and SXUV from International Radiation Detectors, Inc. were used for the comparison. The comparison had the form of a star comparison: Pilot-lab A-pilot-lab B-pilot, PTB acting as the pilot laboratory. All results were communicated directly to the pilot laboratory. The report describes in detail the measurements made at PTB and summarizes the reports submitted by the participants. Measurements carried out by the pilot laboratory before and after the circulation of the detectors proved that the stability of the detectors was sufficient for the comparison. For the type AXUV detectors, however, changes in their responsivity contributed to the uncertainty of the comparison. Measurement results from participants and their associated uncertainties were analyzed in this report according to the Guidelines for CCPR Comparison Report Preparation. The uncertainty contributions were separated, as to whether they are wavelength dependent or not. All bilateral DoE are well within the respective k = 2 expanded uncertainty

5.5nm wavelength-tunable high-power MOPA diode laser system at 971 nm

Science.gov (United States)

Tawfieq, Mahmoud; Müller, André; Fricke, Jörg; Della Casa, Pietro; Ressel, Peter; Ginolas, Arnim; Feise, David; Sumpf, Bernd; Tränkle, Günther

2018-02-01

In this work, a widely tunable hybrid master oscillator power amplifier (MOPA) diode laser with 6.2 W of output power at 971.8 nm will be presented. The MO is a DBR laser, with a micro heater embedded on top of the DBR grating for wavelength tunability. The emitted light of the MO is collimated and coupled into a tapered amplifier using micro cylindrical lenses, all constructed on a compact 25 mm × 25 mm conduction cooled laser package. The MOPA system emits light with a measured spectral width smaller than 17 pm, limited by the spectrometer, and with a beam propagation factor of M2 1/e2 = 1.3 in the slow axis. The emission is thus nearly diffraction limited with 79% of the total power within the central lobe (4.9 W diffraction limited). The electrically controlled micro-heater provides up to 5.5 nm of wavelength tunability, up to a wavelength of 977.3 nm, while maintaining an output power variation of only +/- 0.16 % for the entire tuning range.

MOCVD growth of GaN layer on InN interlayer and relaxation of residual strain

Energy Technology Data Exchange (ETDEWEB)

Lee, Keon-Hun; Park, Sung Hyun; Kim, Jong Hack; Kim, Nam Hyuk; Kim, Min Hwa [Department of Materials Science and Engineering, Seoul National University, Seoul, 151-742 (Korea, Republic of); Na, Hyunseok [Department of Advanced Materials Science and Engineering, Daejin University, Pocheon, 487-711 (Korea, Republic of); Yoon, Euijoon, E-mail: eyoon@snu.ac.k [Department of Materials Science and Engineering, Seoul National University, Seoul, 151-742 (Korea, Republic of); Department of Nano Science and Technology, Graduate School of Convergence Science and Technology, Seoul National University, Suwon 433-270 (Korea, Republic of)

2010-09-01

100 nm InN layer was grown on sapphire c-plane using a metal-organic chemical vapor deposition (MOCVD) system. Low temperature (LT) GaN layer was grown on InN layer to protect InN layer from direct exposure to hydrogen flow during high temperature (HT) GaN growth and/or abrupt decomposition. Subsequently, thick HT GaN layer (2.5 {mu}m thick) was grown at 1000 {sup o}C on LT GaN/InN/sapphire template. Microstructure of epilayer-substrate interface was investigated by transmission electron microscopy (TEM). From the high angle annular dark field TEM image, the growth of columnar structured LT GaN and HT GaN with good crystallinity was observed. Though thickness of InN interlayer is assumed to be about 100 nm based on growth rate, it was not clearly shown in TEM image due to the InN decomposition. The lattice parameters of GaN layers were measured by XRD measurement, which shows that InN interlayer reduces the compressive strain in GaN layer. The relaxation of compressive strain in GaN layer was also confirmed by photoluminescence (PL) measurement. As shown in the PL spectra, red shift of GaN band edge peak was observed, which indicates the reduction of compressive strain in GaN epilayer.

Utilizing assumption for project of stand for solid state targets activation on inner beams of AIC-144 cyclotron; Zalozenia uzytkowe do projektu stanowiska do aktywacji tarcz w stanie stalym na wiazce wewnetrznej cyklotronu AIC-144

Energy Technology Data Exchange (ETDEWEB)

Petelenz, B. [The H. Niewodniczanski Inst. of Nuclear Physics, Cracow (Poland)

1997-09-01

General assumptions for project of target activation stand at AIC-144 cyclotron are presented. The project predicts production of {sup 67}Ga, {sup 111}In, {sup 201}Tl, {sup 139}Ce, {sup 88}Y, {sup 123}I and {sup 211}At isotopes using various target backings. Directions concerning target cooling and beam parameters are also described 25 refs, 1 tab

Laser hypersensitisation using 266nm light

DEFF Research Database (Denmark)

Sørensen, Henrik Rokkjær; Canning, J.; Kristensen, Martin

2005-01-01

UV hypersensitisation using CW 266 nm light on hydrogenated Ge-doped fibre is reported. The optimum sensitisation fluence is found to be in the range of 5 to 10 kJ/cm2, coinciding with previous results obtained using 355 nm light, indicating the same end-process used in the photochemical reaction...

Laser Shock Processing of 6061-T6 Al alloy with 1064 nm and 532 nm wavelengths

International Nuclear Information System (INIS)

Gomez-Rosas, G.; Rubio-Gonzalez, C.; Ocana, J.L.; Molpeceres, C.; Porro, J.A.; Morales, M.; Casillas, F.J.

2010-01-01

Laser Shock Processing (LSP) has been proposed as a competitive alternative technology to classical treatments for improving fatigue and wear resistance of metals. We present a configuration and results in the LSP concept for metal surface treatments in underwater laser irradiation at 532 nm and 1064 nm. The purpose of the work is to compare the effect of both wavelengths on the same material. A convergent lens is used to deliver 1.2 J/pulse (1064 nm) and 0.9 J/pulse (532 nm) in a 8 ns laser FWHM pulse produced by 10 Hz Q-switched Nd:YAG laser with spots of a 1.5 mm in diameter moving forward along the work piece. A LSP configuration with experimental results using a pulse density of 2500 pulses/cm 2 and 5000 pulses/cm 2 in 6061-T6 aluminum samples are presented. High level compressive residual stresses are produced using both wavelengths. It has been shown that surface residual stress level is comparable to that achieved by conventional shot peening, but with greater depths. This method can be applied to surface treatment of final metal products.

Mechanical stress and stress release channels in 10–350 nm palladium hydrogen thin films with different micro-structures

International Nuclear Information System (INIS)

Wagner, Stefan; Kramer, Thilo; Uchida, Helmut; Dobron, Patrik; Cizek, Jakub; Pundt, Astrid

2016-01-01

For thin metal films adhered to rigid substrates hydrogen uptake results in compressive stresses in the GPa range. Stresses affect the thermodynamics as well as the durability of thin films, but many films can release stress above critical stress values. Depending on the films' thickness, microstructure and adhesion to the substrate, which determine the energy available in the nano-sized system, stress release is conducted via different release mechanisms. To evaluate the different mechanisms, Palladium thin films ranging from 10 nm to 350 nm and with three different types of microstructures (nanocrystalline, multi-oriented epitaxy and three-fold epitaxy) are studied with special focus on the mechanical stress. In-situ substrate curvature measurements, XRD stress analyses and acoustic emission (AE) measurements are conducted to determine intrinsic stresses, hydrogen-induced stress changes and stress release signals. By this complementary experimental approach, different stress release mechanisms (named channels) are identified. Discrete stress relaxation (DSR) events are found already within the overall linear elastic stress-strain regime. Energies to stimulate DSRs lay well below the formation energy of dislocations, and may allow the movement of defects pre-existing in the films. For higher strain energies, all studied films can release stress by the formation of new dislocations and plastic deformation. When the adhesion to the substrate is small, an alternative release channel of film buckling opens for thick films.

Instrument for evaluating the electrical resistance and wavelength-resolved transparency of stretchable electronics during strain

International Nuclear Information System (INIS)

Azar, A. D.; Finley, E.; Harris, K. D.

2015-01-01

A complete analysis of strain tolerance in a stretchable transparent conductor (TC) should include tracking of both electrical conductivity and transparency during strain; however, transparency is generally neglected in contemporary analyses. In this paper, we describe an apparatus that tracks both parameters while TCs of arbitrary composition are deformed under stretching-mode strain. We demonstrate the tool by recording the electrical resistance and light transmission spectra for indium tin oxide-coated plastic substrates under both linearly increasing strain and complex cyclic strain processes. The optics are sensitive across the visible spectrum and into the near-infrared region (∼400-900 nm), and without specifically optimizing for sampling speed, we achieve a time resolution of ∼200 ms. In our automated analysis routine, we include a calculation of a common TC figure of merit (FOM), and because solar cell electrodes represent a key TC application, we also weigh both our transparency and FOM results against the solar power spectrum to determine “solar transparency” and “solar FOM.” Finally, we demonstrate how the apparatus may be adapted to measure the basic performance metrics for complete solar cells under uniaxial strain

Novel 755-nm diode laser vs. conventional 755-nm scanned alexandrite laser: Side-by-side comparison pilot study for thorax and axillary hair removal.

Science.gov (United States)

Paasch, Uwe; Wagner, Justinus A; Paasch, Hartmut W

2015-01-01

Alexandrite (755 nm) and diode lasers (800-810 nm) are commonly used for hair removal. The alexandrite laser technology is somewhat cumbersome whereas new diode lasers are more robust. Recently, alexandrite-like 755 nm wavelength diodes became available. To compare the efficacy, tolerability, and subject satisfaction of a 755 nm diode laser operated in conventional (HR) and non-conventional in-motion (SHR) modes with a conventional scanned alexandrite 755 nm laser for chest and axillary hair removal. A prospective, single-center, proof of principle study was designed to evaluate the safety, efficacy and handling of a 755 nm diode laser system in comparison to a standard alexandrite 755 nm scanning hair removal laser. The new 755 nm diode is suitable to be used in SHR and HR mode and has been tested for its safety, efficacy and handling in a volunteer with success. Overall, both systems showed a high efficacy in hair reduction (88.8% 755 nm diode laser vs. 77.7% 755 nm alexandrite laser). Also, during the study period, no severe adverse effects were reported. The new 755 nm diode laser is as effective and safe as the traditional 755 nm alexandrite laser. Additionally, treatment with the 755 nm diode laser with HR and SHR modes was found to be less painful.

Transfer reactions in sup(32,36)S + sup(144,154)Sm

International Nuclear Information System (INIS)

Pacheco, A.J.; Tada, M. di; Fernandez Niello, J.; Testoni, J.E.

1990-01-01

The deformation of spherical nuclei in transfer reactions near to the coulomb barrier is studied. The sup(32,36)S + sup(144,154)Sm reactions were carried out using sup(32)S beams produced by TANDAR accelerator in Buenos Aires with energies of 148 MeV and 160 MeV and sup(36)S beams produced by tandem accelerator of Laboratorio Nazionale di Legnaro with energies of 142 MeV and 155 MeV. The angular distributions were measured for sup(32)S reaction using gas ionization chamber and position sensitive detector. The mass spectra of reaction products were obtained measuring time of flight between time detectors, in the sup(36)S reaction. (M.C.K.)

Comparative effects of inhaled relatively insoluble forms of 90Y, 144Ce, and 90Sr on canine peripheral lymphocyte function

International Nuclear Information System (INIS)

Benjamin, S.A.; Jones, R.K.; Snipes, M.B.; Lustgarten, C.S.

1976-01-01

Dogs that have inhaled relatively insoluble forms of either alpha- or beta-emitting radionuclides manifest a peripheral lymphopenia, the development and course of which depends on both total dose and dose rate. The remaining peripheral lymphocytes in dogs exposed to longer lived beta-emitting radionuclides showed a depressed function as measured by the ability to respond to plant mitogens in vitro. This experiment was designed to evaluate the effect of dose rate on peripheral lymphocyte function by exposing dogs to aerosols of radionuclides with varied effective half-lives in the lung: 90 Y (2.6 days), 144 Ce (170 days), and 90 Sr (650 days). Three groups of four adult beagle dogs each were exposed by inhalation to 90 Y, 144 Ce, or 90 Sr in fused-clay particles. Two controls were matched with each group. Initial lung burdens and initial dose rates to the lung were 520 to 610 μCi/kg of body weight and 2200 to 2600 rads/day in the 90 Y group, 33 to 60 μCi/kg and 200 to 350 rads/day in the 144 Ce group, and 25 to 32 μCi/kg and 130 to 170 rads/day in the 90 Sr group. Hematologic parameters and lymphocyte function as measured by the ability of lymphocytes to respond to plant mitogen stimulation were evaluated on a weekly or biweekly basis for 8 weeks after exposure and on a monthly basis thereafter. The 90 Y-exposed dogs showed a marked lymphopenia within 1 week with a return to control levels by 20 weeks after exposure. The remaining peripheral lymphocytes, however, showed no functional changes in these dogs. Animals exposed to 144 Ce or 90 Sr developed a progressive and persisent lymphopenia and showed functional depression of the remaining lymphocytes as well. The relationships among dose pattern, lymphopenia, and lymphocyte-function depression are discussed

Development of 2-channel (532 nm and 355 nm) mobile LIDAR for mapping particulate matter in the atmosphere

CSIR Research Space (South Africa)

Sivakumar, V

2010-09-01

Full Text Available In this paper, the authors describe the developmentof 2-Channel (532 nm and 355 nm) mobile LIDAR system for studying atmospheric particulate matter. The system is currently tested in house at the Council for Scientific and Industrial Research...

Compact Nd:YAG laser operating at 1.06, 1.32, and 1.44 μm for dental caries effective disinfection

Science.gov (United States)

Dostálová, Tat'jana; Jelínková, Helena; Kadlecová, Martina; Němec, Michal; Å ulc, Jan; Fibrich, Martin; Nejezchleb, Karel; Kapitch, Nickalai; Å koda, Václav

2017-02-01

The analysis of the disinfection effect of Nd:YAG laser radiation was investigated for patients with high concentration of Streptococcus mutans in saliva (positive result in Saliva-check mutans test). For the interaction the Nd:YAG laser system generated separate switchable wavelengths with the maximum output energies 1.1, 0.6, and 0.3 J for wavelength 1.06 μm, 1.32, μm and 1.44 μm, respectively, was used. Our study proved that after the laser irradiation the Saliva-check test showed negative presence of Streptococcus mutans. The disinfection effect was confirmed for all used radiation wavelength. For 1.44 μm this effect was reached with a smallest energy density.

High-resolution vector magnetometry: Piezo-spin-polarization effect and in-plane strain-induced dominating uniaxial magnetic anisotropy in a 200-nm-thick Ni thin film

Science.gov (United States)

Benito, L.

2018-04-01

Owing to its high-sensitivity, reliability, fast, versatile and cost-effective operation, vibrating sample magnetometers (VSM) are massively popular characterization instruments at Magnetism laboratories worldwide. Nevertheless, the inherent appearance of synchronous noise represents a major drawback, which critically limits the fine probing of nanometer-sized media. I here report on an innovative approach to eliminate synchronous noise in VSM. This consists of fitting engineered mechanical devices that absorbs vibration energy, dissipating that into heat. Complementarily, a novel transversal pick-up coil system is also presented and analyzed; this detection system has been engineered to enhance the noise-to-signal ratio and optimized for measuring small size thin film samples. The implementation of a combined mechanical and electromagnetic approach enables to notably enhance the VSM performance, achieving a sensitivity better than 1 ×10-6 emu and a resolution below 5 ×10-8 emu, so that the magnetization vector in nanostructured media can be accurately mapped out down to cryogenic temperatures. I lastly show precision magnetometry measurements carried out in an epitaxial (0 0 1)-oriented 200 nm-thick Ni thin film. The analysis reveals the arising of an in-plane dominating strain-induced uniaxial magnetic anisotropy, K2ef = - 6.455kJ m - 3 , and a stunning piezo-spin-polarization effect resulting in a remarkable 10% modulation of the magnetization vector, ∼ 27 emu/cm3, with respect to the cubic lattice axes. Both effects are attributed to the likely existence of an orthorhombic lattice distortion, i.e.εxx -εyy ≈ - 2 ×10-3 . This categorical link enables to assign the observed anisotropic spin-polarization in the Ni overlayer to a two-ion magnetoelastic coupling effect.

Comparative analysis of the effect of the GaAlAs laser irradiation in 780 nm and 660 nm in the hypersensitive dentin

International Nuclear Information System (INIS)

Yuan, Sun Chien

2003-01-01

This study was to evaluate and compare the effects of the low intensity in laser radiation among GaAlAs 780 nm and GaAlAs 660 nm. The main proposal is to verify if there is any difference of the effects or results in low intensity laser application treatment of hypersensitive dentin, keeping the same parameters, only differing in wavelength. The samples were distributed in two groups. Group A 90 cases, treated with GaAlAs 780 nm and group B irradiated with GaAlAs 660 nm with a total of 76 cases analyzed. The results of application with GaAlAs 660 nm and GaAlAs 780 nm do not differ statistically. Which means using any one of the irradiation gives the same results. However can be noted that the response of reduction of hypersensitivity is faster with the radiation of GaAlAs 780 nm, but the results after three applications is the same for both types of radiation. (author)

Extreme Ultraviolet Process Optimization for Contact Layer of 14 nm Node Logic and 16 nm Half Pitch Memory Devices

Science.gov (United States)

Tseng, Shih-En; Chen, Alek

2012-06-01

Extreme ultraviolet (EUV) lithography is considered the most promising single exposure technology at the 27 nm half-pitch node and beyond. The imaging performance of ASML TWINSCAN NXE:3100 has been demonstrated to be able to resolve 26 nm Flash gate layer and 16 nm static random access memory (SRAM) metal layer with a 0.25 numerical aperture (NA) and conventional illumination. Targeting for high volume manufacturing, ASML TWINSCAN NXE:3300B, featuring a 0.33 NA lens with off-axis illumination, will generate a higher contrast aerial image due to improved diffraction order collection efficiency and is expected to reduce target dose via mask biasing. This work performed a simulation to determine how EUV high NA imaging benefits the mask rule check trade-offs required to achieve viable lithography solutions in two device application scenarios: a 14 nm node 6T-SRAM contact layer and a 16 nm half-pitch NAND Flash staggered contact layer. In each application, the three-dimensional mask effects versus Kirchhoff mask were also investigated.

Breakup Reactions and Exclusive Measurements in the 6,7Li+144Sm Systems

International Nuclear Information System (INIS)

Heimann, D. Martinez; Pacheco, A. J.; Arazi, A.; Figueira, J. M.; Negri, A. E.; Capurro, O. A.; Carnelli, P.; Fimiani, L.; Grinberg, P.; Marti, G. V.; Testoni, J. E.; Monteiro, D. S.; Niello, J. O. Fernandez; Marta, H. D.

2009-01-01

The breakup of the projectile-like nuclei in reactions induced by 30 MeV 6 Li and 7 Li beams on a 144 Sm target have been measured through the coincident detection of the in-plane emitted light particles. The primary ion that undergoes breakup has been identified and the physically meaningful variables that characterize the reaction have been obtained on a purely experimental basis. Distributions have been obtained for both the binary emission angle and for the breakup emission angle in the reference frame of the breakup products.

Angular momentum distributions for {sup 16}O + {sup 144}Nd

Energy Technology Data Exchange (ETDEWEB)

Duchene, G.; Romain, P.; Beck, F.A.; Benet, P.; Disdier, D.; Haas, B.; Lott, B.; Rauch, V.; Scheibling, F.; Vivien, J.P. [Strasbourg-1 Univ., 67 (France). Centre de Recherches Nucleaires]|[Strasbourg-1 Univ., 67 (France); Basu, S.K. [Bhabha Atomic Research Centre, Calcutta (India). Variable Energy Cyclotron Project; Bozek, E.; Zuber, K. [Institute of Nuclear Physics, Cracow (Poland); Di Gregorio, D.E.; Fernandez-Niello, J. [Comision Nacional de Energia Atomica, Buenos Aires (Argentina). Dept. de Fisica

1992-12-31

Fusion cross sections have been measured for the system {sup 16} O + {sup 144} Nd at bombarding energies in the range 67 MeV {<=}E{sub lab} {<=} 90 MeV by detecting directly evaporation residues in Si detectors and in the range 60 MeV {<=}E{sub lab}{<=} 75 MeV by off-line detection of the K X-rays emitted by the radioactive evaporation residues and daughters. In order to obtain the spin distributions in the compound system gamma-ray multiplicity distributions for the most important neutron evaporation channels were also measured using a 4{pi} - BaF{sub 2} array, in conjunction with Ge detectors. Results are compared with calculations based on models that consider fluctuations in barrier height due to ground state zero point vibrations as well as couplings to various inelastic and transfer channels.

Strain hardening by dynamic slip band refinement in a high-Mn lightweight steel

International Nuclear Information System (INIS)

Welsch, E.; Ponge, D.; Hafez Haghighat, S.M.; Sandlöbes, S.; Choi, P.; Herbig, M.; Zaefferer, S.; Raabe, D.

2016-01-01

The strain hardening mechanism of a high-Mn lightweight steel (Fe-30.4Mn-8Al-1.2C (wt%)) is investigated by electron channeling contrast imaging (ECCI) and transmission electron microscopy (TEM). The alloy is characterized by a constant high strain hardening rate accompanied by high strength and high ductility (ultimate tensile strength: 900 MPa, elongation to fracture: 68%). Deformation microstructures at different strain levels are studied in order to reveal and quantify the governing structural parameters at micro- and nanometer scales. As the material deforms mainly by planar dislocation slip causing the formation of slip bands, we quantitatively study the evolution of the slip band spacing during straining. The flow stress is calculated from the slip band spacing on the basis of the passing stress. The good agreement between the calculated values and the tensile test data shows dynamic slip band refinement as the main strain hardening mechanism, enabling the excellent mechanical properties. This novel strain hardening mechanism is based on the passing stress acting between co-planar slip bands in contrast to earlier attempts to explain the strain hardening in high-Mn lightweight steels that are based on grain subdivision by microbands. We discuss in detail the formation of the finely distributed slip bands and the gradual reduction of the spacing between them, leading to constantly high strain hardening. TEM investigations of the precipitation state in the as-quenched state show finely dispersed atomically ordered clusters (size < 2 nm). The influence of these zones on planar slip is discussed.

High-resolution optical coherence tomography using broadband light source with strain-controlled InAs/GaAs quantum dots

Energy Technology Data Exchange (ETDEWEB)

Tsubaki, Ippei; Harada, Yukihiro; Kita, Takashi [Department of Electrical and Electronic Engineering, Graduate School of Engineering, Kobe University, 1-1 Rokkodai, Nada, Kobe 657-8501 (Japan)

2012-12-15

Recently, there has been an increasing interest in broadband light sources to develop a biomolecular imaging technique called optical coherence tomography (OCT). We fabricated superluminescent diodes (SLDs) using three kinds of quantum dot (QD) layers with different emission wavelength in the active region. The emission wavelength was controlled by reducing the strain in QDs by using In{sub 0.1}Ga{sub 0.9}As strain-reducing layer. The SLD device showed a broad electroluminescence spectrum with the center wavelength of 1104 nm and the spectral linewidth of 122 nm at the injection of 40 mA, which corresponds to the theoretical axial resolution of 4.4 {mu}m. To estimate the actual resolution of the OCT system using fabricated SLD, we measured the interference signal in the Michelson interferometer. An axial resolution of 5.4 {mu}m, which is close to the theoretical limit, was obtained (copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

The sensitivity of an actinic reticuloid cell strain to near-ultraviolet radiation and its modification by Trolox-C, a vitamin E analogue

International Nuclear Information System (INIS)

Kralli, A.; Moss, S.H.

1987-01-01

Near-UV radiation (365 nm)-induced lethality, as measured by colony-forming ability, showed an actinic reticuloid cell strain to be sensitive relative to normal human fibroblasts, when irradiated at 25 0 C. This effect was not seen after far-UV (254 nm) irradiation. Trolox-C, a water-soluble analogue of vitamin E, incorporated in the pre-irradiation growth medium or in the post-irradiation plating medium, protected the actinic reticuloid cells to the extent that they were as resistant as normal cells. Plating medium containing Trolox-C did not provide differential protection against inactivation of the two cell strains by wavelengths in the far-UV region. The protection provided by Trolox-C, an analogue of the natural antioxidant vitamin E, suggests some free radical involvement in the aetiology of the disease. (author)

Combined 595-nm and 1,064-nm laser irradiation of recalcitrant and hypertrophic port-wine stains in children and adults.

Science.gov (United States)

Alster, Tina S; Tanzi, Elizabeth L

2009-06-01

Although pulsed dye laser (PDL) treatment of port-wine stain (PWS) has long been proven safe and effective, incomplete clearance of these vascular malformations can be problematic. In addition, advanced PWS with deeper coloration and tissue hypertrophy can be particularly difficult to treat because of the superficial dermal penetration of 585- to 595-nm light. The purpose of this study was to evaluate the safety and efficacy of a novel device that delivers sequential pulses of 595- and 1,064-nm wavelengths in the treatment of recalcitrant and hypertrophic PWS. Twenty-five children and adults (skin phototypes I-III) with recalcitrant or hypertrophic PWS showing incomplete clearance after 10 prior PDL treatments were included in the study. Successive treatments using a 595-nm PDL and a 1,064-nm neodymium-doped yttrium-aluminum-garnet (Nd:YAG) laser were delivered at 6- to 8-week intervals. Two masked assessors determined clinical improvement of treatment areas using independent evaluation of comparative photographs at baseline and 3 months after treatment using a standard quartile grading scale. The use of dual 595-/1,064-nm wavelengths provided continued improvement of PWS that were previously recalcitrant to ongoing PDL therapy. Side effects were limited to transient erythema, edema, and mild purpura. Rare vesicle formation was observed, with no subsequent scarring or undesirable pigmentary changes. The novel dual 595-nm PDL and 1,064-nm Nd:YAG laser is an effective treatment for PWS that are recalcitrant to PDL therapy alone.

Strain tuneable whispering gallery mode resonators in the estimation of the elasto-optic parameters of soft materials

Science.gov (United States)

Pissadakis, Stavros; Milenko, Karolina; Aluculesei, Alina; Fytas, George

2016-04-01

In this manuscript we present the fabrication and characterization of a novel, polymer whispering gallery modes (WGMs) spherical micro-resonator, formed around the waist of an optical fiber taper. Fiber taper with well attached spheroid works as a cord, fixed on two ends enabling strain application to the resonator body. Controllable elastic elongation of the encapsulated fiber taper causes a change in the shape of the spheroid, which modifies the diameter and directional refractive index of the cavity. These changes influence the wavelength position of the WGMs resonances with a linear blue shift up to 0.6 nm, with corresponding strains up to 700Μɛ. The strain induced WGMs shift with respect to resonator diameter and annealing process is presented and analyzed.

Radiation Failures in Intel 14nm Microprocessors

Science.gov (United States)

Bossev, Dobrin P.; Duncan, Adam R.; Gadlage, Matthew J.; Roach, Austin H.; Kay, Matthew J.; Szabo, Carl; Berger, Tammy J.; York, Darin A.; Williams, Aaron; LaBel, K.;

Ocular effects of ultraviolet radiation from 295 to 365 nm

International Nuclear Information System (INIS)

Pitts, D.G.; Cullen, A.P.; Hacker, P.D.

1977-01-01

A 5,000 watt Xe--Hg source and a double monochromator were used to produce 6.6 nm full band-pass ultraviolet (UV) radiation. Pigmented rabbit eyes were exposed to the 6.6 nm band-pass UV radiant energy in 5 nm steps from 295 to 320 nm and at random intervals above 320 nm. Corneal and lenticular damage was assessed and classified with a biomicroscope. Corneal threshold radiant exposure (Hc) rose very rapidly from 0.022 Jcm -2 at 300 nm to 10.99 Jcm -2 at 335 nm. Radiant exposures exceeding 2 x Hc resulted in irreversible corneal damage. Lenticular damage was limited to wavebands above 295 nm. The action spectrum for the lens began at 295 nm and extended to about 315 nm. Permanent lenticular damage occurred at radiant exposure levels approximately twice the threshold for lenticular radiant exposure. The importance in establishing both corneal and lenticular damage criteria is emphasized

Phenotypic shift in Pseudomonas aeruginosa populations from cystic fibrosis lungs after 2-week antipseudomonal treatment

DEFF Research Database (Denmark)

Fernandez-Barat, Laia; Ciofu, Oana; Kragh, Kasper N.

2017-01-01

) colony-forming units (CFU/mL), b) frequency of mucoids and non-mucoids, c) resistance pattern to anti-pseudomonal drugs, d) hypermutability, e) transcriptomic profiles, and f) presence of biofilms. Results We collected 23 sputum samples (12 before antibiotic treatment and 11 after) and 77 P. aeruginosa...

Recovery of electrical resistance in copper films on polyethylene terephthalate subjected to a tensile strain

International Nuclear Information System (INIS)

Glushko, O.; Marx, V.M.; Kirchlechner, C.; Zizak, I.; Cordill, M.J.

2014-01-01

Substantial recovery (decrease) of electrical resistance during and after unloading is demonstrated for copper films on polyethylene terephthalate substrates subjected to a tensile strain with different peak values. Particularly, the films strained to 5% exhibit full resistance recovery after unloading despite clearly visible plastic deformation of the film. The recovery of electrical resistance in connection with the mechanical behavior of film/substrate couple is discussed with the help of in situ scanning electron microscopy and X-ray diffraction analysis. - Highlights: • Tensile tests on 200 nm Cu films on PET substrate are performed. • Electrical resistance is recorded in-situ during loading and unloading. • Significant recovery (decrease) of resistance is observed during and after unloading. • Films strained to 5% demonstrate full resistance recovery. • Viscoelastic relaxation of PET is responsible for recovery of Cu film resistance

Growth parameter optimization and interface treatment for enhanced electron mobility in heavily strained GaInAs/AlInAs high electron mobility transistor structures

International Nuclear Information System (INIS)

Fedoryshyn, Yuriy; Ostinelli, Olivier; Alt, Andreas; Pallin, Angel; Bolognesi, Colombo R.

2014-01-01

The optimization of heavily strained Ga 0.25 In 0.75 As/Al 0.48 In 0.52 As high electron mobility transistor structures is discussed in detail. The growth parameters and the channel layer interfaces were optimized in order to maximize the mobility of the two-dimensional electron gas. Structures composed of an 11 nm thick channel layer and a 4 nm thick spacer layer exhibited electron mobilities as high as 15 100 cm 2 /Vs and 70 000 cm 2 /Vs at 300 and 77 K, respectively, for channels including InAs strained layers. The sheet carrier density was kept above 2.5 × 10 12  cm −2 throughout the entire study

Combination of Q-switched and quasi long-pulsed 1064-nm Nd:YAG laser, non-ablative 1450-nm diode laser, and ablative 10 600-nm carbon dioxide fractional laser for enlarged pores.

Science.gov (United States)

Cho, Sung Bin; Noh, Seongmin; Lee, Sang Ju; Kang, Jin Moon; Kim, Young Koo; Lee, Ju Hee

2010-07-01

Currently, there is no gold standard for the treatment of enlarged facial pores. In this report, we describe a patient with enlarged nasal pores which were treated with a combination of a non-ablative 1450-nm diode laser, a Q-switched and quasi long-pulsed 1064-nm Nd:YAG laser, and an ablative 10 600-nm carbon dioxide fractional laser system. Four months after the final treatment, the condition of the patient's pores had markedly improved, and the patient was satisfied with the results.

Structural Elucidation of Metabolites of Synthetic Cannabinoid UR-144 by Cunninghamella elegans Using Nuclear Magnetic Resonance (NMR) Spectroscopy.

Science.gov (United States)

Watanabe, Shimpei; Kuzhiumparambil, Unnikrishnan; Fu, Shanlin

2018-03-08

The number of new psychoactive substances keeps on rising despite the controlling efforts by law enforcement. Although metabolism of the newly emerging drugs is continuously studied to keep up with the new additions, the exact structures of the metabolites are often not identified due to the insufficient sample quantities for techniques such as nuclear magnetic resonance (NMR) spectroscopy. The aim of the study was to characterise several metabolites of the synthetic cannabinoid (1-pentyl-1H-indol-3-yl) (2,2,3,3-tetramethylcyclopropyl) methanone (UR-144) by NMR spectroscopy after the incubation with the fungus Cunninghamella elegans. UR-144 was incubated with C. elegans for 72 h, and the resulting metabolites were chromatographically separated. Six fractions were collected and analysed by NMR spectroscopy. UR-144 was also incubated with human liver microsomes (HLM), and the liquid chromatography-high resolution mass spectrometry analysis was performed on the HLM metabolites with the characterised fungal metabolites as reference standards. Ten metabolites were characterised by NMR analysis including dihydroxy metabolites, carboxy and hydroxy metabolites, a hydroxy and ketone metabolite, and a carboxy and ketone metabolite. Of these metabolites, dihydroxy metabolite, carboxy and hydroxy metabolites, and a hydroxy and ketone metabolite were identified in HLM incubation. The results indicate that the fungus is capable of producing human-relevant metabolites including the exact isomers. The capacity of the fungus C. elegans to allow for NMR structural characterisation by enabling production of large amounts of metabolites makes it an ideal model to complement metabolism studies.

[Morphological characteristics and physiological properties of aflatoxin B1 producing and non-producing Aspergillus flavus strains].

Science.gov (United States)

Kogbo, W; Lemarinier, S; Boutibonnes, P

1985-09-01

Comparison between about 80 strains of Aspergillus flavus, belonging to the series flavus and oryzae, obtained from international collections but also isolated from French or African substrates revealed the following observations: 1. Cultural and morphological characteristics of toxicogenic and atoxicogenic strains of A. flavus are similar. However, the former produce a diffusible yellow pigment in 83% of isolates. 2. The two groups of conidiospores have the same resistance to UV irradiation (254 nm, 5 and 10 min). All the strains are equally sensitive to 4 antifungal antibiotics: nystatine, ketoconazole, clotrimazole and amphotericine. 3. A difference was seen in the capacity to produce enzymes as alpha-galactosidase, beta-galactosidase and beta-glucosidase, implicated in the glucid metabolism. The specific hydrolytic activity has been confirmed by the characterization of a large amount of beta-galactosidase and by a diauxic growth on glucose medium supplemented by lactose. Possible relationship between these characters and aflatoxin B1 production by A. flavus strains is discussed.

Generation of localized strain in a thin film piezoelectric to control individual magnetoelectric heterostructures

Energy Technology Data Exchange (ETDEWEB)

Cui, Jizhai; Liang, Cheng-Yen; Sepulveda, Abdon; Carman, Gregory P.; Lynch, Christopher S., E-mail: cslynch@seas.ucla.edu [Department of Mechanical and Aerospace Engineering, University of California, Los Angeles, California 90095 (United States); Paisley, Elizabeth A.; Ihlefeld, Jon F. [Electronic, Optical, and Nano Materials Department, Sandia National Laboratories, Albuquerque, New Mexico 87185 (United States)

2015-08-31

Experimental results demonstrate the ability of a surface electrode pattern to produce sufficient in-plane strain in a PbZr{sub 0.52}Ti{sub 0.48}O{sub 3} (PZT) thin film clamped by a Si substrate to control magnetism in a 1000 nm diameter Ni ring. The electrode pattern and the Ni ring/PZT thin film heterostructure were designed using a finite element based micromagnetics code. The magnetoelectric heterostructures were fabricated on the PZT film using e-beam lithography and characterized using magnetic force microscopy. Application of voltage to the electrodes moved one of the “onion” state domain walls. This method enables the development of complex architectures incorporating strain-mediated multiferroic devices.

Streptomyces lunalinharesii Strain 235 Shows the Potential to Inhibit Bacteria Involved in Biocorrosion Processes

Directory of Open Access Journals (Sweden)

Juliana Pacheco da Rosa

2013-01-01

Full Text Available Four actinomycete strains previously isolated from Brazilian soils were tested for their antimicrobial activity against Bacillus pumilus LF-4 and Desulfovibrio alaskensis NCIMB 13491, bacteria that are well known to be involved in biofilm formation and biocorrosion. Strain 235, belonging to the species Streptomyces lunalinharesii, inhibited the growth of both bacteria. The antimicrobial activity was seen over a wide range of pH, and after treatment with several chemicals and heat but not with proteinase K and trypsin. The antimicrobial substances present in the concentrated supernatant from growth media were partially characterized by SDS-PAGE and extracellular polypeptides were seen. Bands in the size range of 12 to 14.4 kDa caused antimicrobial activity. Transmission electron microscopy of D. alaskensis cells treated with the concentrated supernatant containing the antimicrobial substances revealed the formation of prominent bubbles, the spherical double-layered structures on the cell membrane, and the periplasmic space completely filled with electron-dense material. This is the first report on the production of antimicrobial substances by actinomycetes against bacteria involved in biocorrosion processes, and these findings may be of great relevance as an alternative source of biocides to those currently employed in the petroleum industry.

Substrate-induced strain in carbon nanodisks

International Nuclear Information System (INIS)

Osváth, Z.; Vértesy, Z.; Lábár, J.; Nemes-Incze, P.; Horváth, Z.E.; Biró, L.P.

2014-01-01

Graphitic nanodisks of typically 20–50 nm in thickness, produced by the so-called Kvaerner Carbon Black and Hydrogen Process were dispersed on gold substrate and investigated by atomic force microscopy (AFM), field emission scanning electron microscopy (FE-SEM), and confocal Raman spectroscopy. The roughness of the gold surface was drastically changed by annealing at 400 °C. AFM measurements show that this change in the surface roughness induces changes also in the topography of the nanodisks, as they closely follow the corrugation of the gold substrate. This leads to strained nanodisks, which is confirmed also by confocal Raman microscopy. We found that the FE-SEM contrast obtained from the disks depends on the working distance used during the image acquisition by In-lens detection, a phenomenon which we explain by the decrease in the amount of electrons reaching the detector due to diffraction. This process may affect the image contrast in the case of other layered materials, like hexagonal boron nitride, and other planar hybrid nanostructures, too. - Highlights: • Bending of carbon nanodisks is induced by the roughness of the gold substrate. • Confocal Raman microscopy shows a compressive strain induced in the nanodisks. • The electron microscopy contrast of nanodisks depends on the working distance

130-nm tunable grating-mirror VCSEL

DEFF Research Database (Denmark)

Chung, Il-Sug; Mørk, Jesper

2014-01-01

configuration instead of the extended cavity configuration can bring 130-nm tuning range around 1330-nm wavelength. The air-coupled cavity is known to reduce the quantum confinement factor in VCSELs, increasing threshold. In our air-coupled cavity HCG VCSEL case, the very short power penetration length...... in the HCG minimizes this reduction of the quantum confinement factor, not as significant as in the air-coupled cavity DBR VCSEL....

Two transistor cluster DICE Cells with the minimum area for a hardened 28-nm CMOS and 65-nm SRAM layout design

International Nuclear Information System (INIS)

Stenin, V.Ya.; Stepanov, P.V.

2015-01-01

A hardened DICE cell layout design is based on the two spaced transistor clusters of the DICE cell each consisting of four transistors. The larger the distance between these two CMOS transistor clusters, the more robust the hardened DICE SRAM to Single Event Upsets. Some versions of the 28-nm and 65-nm DICE CMOS SRAM block composition have been suggested with minimum cluster distances of 2.27-2.32 mkm. The area of hardened 28-nm DICE CMOS cells is larger than the area of 28-nm 6T CMOS cells by a factor of 2.1 [ru

Room Temperature Electroluminescence from Tensile-Strained Si0.13Ge0.87/Ge Multiple Quantum Wells on a Ge Virtual Substrate

Directory of Open Access Journals (Sweden)

Guangyang Lin

2016-09-01

Full Text Available Direct band electroluminescence (EL from tensile-strained Si0.13Ge0.87/Ge multiple quantum wells (MQWs on a Ge virtual substrate (VS at room temperature is reported herein. Due to the competitive result of quantum confinement Stark effect and bandgap narrowing induced by tensile strain in Ge wells, electroluminescence from Γ1-HH1 transition in 12-nm Ge wells was observed at around 1550 nm. As injection current density increases, additional emission shoulders from Γ2-HH2 transition in Ge wells and Ge VS appeared at around 1300–1400 nm and 1600–1700 nm, respectively. The peak energy of EL shifted to the lower energy side superquadratically with an increase of injection current density as a result of the Joule heating effect. During the elevation of environmental temperature, EL intensity increased due to a reduction of energy between L and Γ valleys of Ge. Empirical fitting of the relationship between the integrated intensity of EL (L and injection current density (J with L~Jm shows that the m factor increased with injection current density, suggesting higher light emitting efficiency of the diode at larger injection current densities, which can be attributed to larger carrier occupations in the Γ valley and the heavy hole (HH valance band at higher temperatures.

Strain distribution analysis in Si/SiGe line structures for CMOS technology using Raman spectroscopy

International Nuclear Information System (INIS)

Hecker, M; Roelke, M; Hermann, P; Zschech, E; Vartanian, V

2010-01-01

Strained silicon underneath the field-effect transistor gate increases significantly the charge carrier mobility and thus improves the performance of leading-edge Complementary Metal Oxide Semiconductor (CMOS) devices. For better understanding of the structure-strain relationship on the nanoscale and for optimization of device structures, the measurement of the local strain state has become essential. Raman spectroscopy is used in the present investigation to analyze the strain distribution in and close to silicon/embedded silicon-germanium (SiGe) line structures in conjunction with strain modeling applying finite element analysis. Both experimental results and modeling indicate the impact of geometry on the stress state. An increase of compressive stress within the Si lines is obtained for increasing SiGe line widths and decreasing Si line widths. The stress state within the Si lines is shown to be a mixed one deviating from a pure uniaxial state. Underneath the SiGe cavities, the presence of a tensile stress was observed. To investigate a procedure to scale down the spatial resolution of the Raman measurements, tip-enhanced Raman scattering experiments have been performed on free-standing SiGe lines with 100nm line width and line distance. The results show superior resolution and strain information not attainable in conventional Raman scans.

On-chip measurements of Brownian relaxation of magnetic beads with diameters from 10 nm to 250 nm

DEFF Research Database (Denmark)

Østerberg, Frederik Westergaard; Rizzi, Giovanni; Hansen, Mikkel Fougt

2013-01-01

We demonstrate the use of planar Hall effect magnetoresistive sensors for AC susceptibility measurements of magnetic beads with frequencies ranging from DC to 1 MHz. This wide frequency range allows for measuring Brownian relaxation of magnetic beads with diameters ranging from 10 nm to 250 nm....... Brownian relaxation is measured for six different magnetic bead types and their hydrodynamic diameters are determined. The hydrodynamic diameters are found to be within 40% of the nominal bead diameters. We discuss the applicability of the different bead types for volume-based biosensing with respect...... to sedimentation, magnetic trapping, and signal per bead. Among the investigated beads, we conclude that the beads with a nominal diameter of 80 nm are best suited for future on-chip volume-based biosensing experiments using planar Hall effect sensors....

Particle size dependent confinement and lattice strain effects in LiFePO4.

Science.gov (United States)

Shahid, Raza; Murugavel, Sevi

2013-11-21

We report the intrinsic electronic properties of LiFePO4 (LFP) with different particle sizes measured by broad-band impedance spectroscopy and diffuse reflectance spectroscopy. The electronic properties show typical size-dependent effects with decreasing particle size (up to 150 nm). However, at the nanoscale level, we observed an enhancement in the polaronic conductivity about an order of magnitude. We found that the origin of the enhanced electronic conductivity in LFP is due to the significant lattice strain associated with the reduction of particle size. The observed lattice strain component corresponds to the compressive part which leads to a decrease in the hopping length of the polarons. We reproduce nonlinearities in the transport properties of LFP with particle size, to capture the interplay between confinement and lattice strain, and track the effects of strain on the electron-phonon interactions. These results could explain why nano-sized LFP has a better discharge capacity and higher rate capability than the bulk counterpart. We suggest that these new correlations will bring greater insight and better understanding for the optimization of LFP as a cathode material for advanced lithium ion batteries.

Treatment of inflammatory facial acne vulgaris with combination 595-nm pulsed-dye laser with dynamic-cooling-device and 1,450-nm diode laser.

Science.gov (United States)

Glaich, Adrienne S; Friedman, Paul M; Jih, Ming H; Goldberg, Leonard H

2006-03-01

The 585-nm pulsed-dye laser and the 1,450-nm diode laser have been found effective for the treatment of mild-to-moderate inflammatory facial acne. This study was designed to evaluate the efficacy and safety of the combined treatment with the 595-nm pulsed-dye laser and the 1,450-nm diode laser for inflammatory facial acne. Fifteen patients with inflammatory facial acne were treated with a combination of the 595-nm pulsed-dye laser and the 1,450-nm diode laser. Patients' subjective response to treatment was evaluated regarding improvement in acne, acne scarring, oiliness, and redness of the skin. All patients had reductions in acne lesion counts. Mean lesion counts decreased 52% (P < 0.01), 63% (P < 0.01), and 84% (P < 0.01) after one, two, and three treatments, respectively. Patients described moderate-to-marked improvement in acne, acne scarring, and post-inflammatory erythema. Adverse effects were limited to mild, transient erythema. The combination of the 595-nm pulsed-dye laser and the 1,450-nm diode laser is safe and effective for the treatment of inflammatory facial acne, acne scarring, and post-inflammatory erythema. 2005 Wiley-Liss, Inc.

Biofilm Filtrates of Pseudomonas aeruginosa Strains Isolated from Cystic Fibrosis Patients Inhibit Preformed Aspergillus fumigatus Biofilms via Apoptosis.

Science.gov (United States)

Shirazi, Fazal; Ferreira, Jose A G; Stevens, David A; Clemons, Karl V; Kontoyiannis, Dimitrios P

2016-01-01

Pseudomonas aeruginosa (Pa) and Aspergillus fumigatus (Af) colonize cystic fibrosis (CF) patient airways. Pa culture filtrates inhibit Af biofilms, and Pa non-CF, mucoid (Muc-CF) and nonmucoid CF (NMuc-CF) isolates form an ascending inhibitory hierarchy. We hypothesized this activity is mediated through apoptosis induction. One Af and three Pa (non-CF, Muc-CF, NMuc-CF) reference isolates were studied. Af biofilm was formed in 96 well plates for 16 h ± Pa biofilm filtrates. After 24 h, apoptosis was characterized by viability dye DiBAc, reactive oxygen species (ROS) generation, mitochondrial membrane depolarization, DNA fragmentation and metacaspase activity. Muc-CF and NMuc-CF filtrates inhibited and damaged Af biofilm (pbiofilms (3.7- fold) compared to treatment with filtrates from Muc-CF- (2.5- fold) or non-CF Pa (1.7- fold). Depolarization of mitochondrial potential was greater upon exposure to NMuc-CF (2.4-fold) compared to Muc-CF (1.8-fold) or non-CF (1.25-fold) (pbiofilm, compared to control, mediated by metacaspase activation. In conclusion, filtrates from CF-Pa isolates were more inhibitory against Af biofilms than from non-CF. The apoptotic effect involves mitochondrial membrane damage associated with metacaspase activation.

Angular momentum distributions for [sup 16]O+[sup 144]Nd

Energy Technology Data Exchange (ETDEWEB)

Duchene, G.; Romain, P.; Beck, F.A.; Benet, P.; Disdier, D.; Haas, B.; Lott, B.; Rauch, V.; Scheibling, F.; Vivien, J.P. (Centre de Recherches Nucleaires, Institut National de Physique Nucleaire et de Physique des Particules, Universite Louis Pasteur, BP 20, 67037 Strasbourg CEDEX (France)); Basu, S.K. (Variable Energy Cyclotron Centre, Bhabha Atomic Research Centre, I/AF Bidhan Nagar, Calcutta 700064 (India)); Bozek, E.; Zuber, K. (Institute of Nuclear Physics Krakow, 30-342 Krakow (Poland)); Di Gregorio, D.; Fernandez-Niello, J. (Departamento de Fisica, Comision Nacional de Energia Atomica, 1429 Buenos Aires (Argentina))

1993-05-01

Fusion cross sections have been measured for the system [sup 16]O+[sup 144]Nd at bombarding energies in the range 67 MeV[le][ital E][sub lab][le]90 MeV by detecting directly evaporation residues in Si detectors and in the range 60 MeV[le][ital E][sub lab][le]75 MeV by off-line detection of the K x rays emitted by the radioactive evaporation residues and daughters. In order to obtain the spin distributions in the compound system gamma-ray multiplicity distributions for the most important neutron evaporation channels were also measured using a 4[pi] BaF[sub 2] array, in conjunction with Ge detectors. Results are compared with calculations based on models that consider fluctuations in barrier height due to ground-state zero-point vibrations as well as couplings to various inelastic and transfer channels.

Resistance of functional Lactobacillus plantarum strains against food stress conditions.

Science.gov (United States)

Ferrando, Verónica; Quiberoni, Andrea; Reinhemer, Jorge; Suárez, Viviana

2015-06-01

The survival of three Lactobacillus plantarum strains (Lp 790, Lp 813 and Lp 998) with functional properties was studied taking into account their resistance to thermal, osmotic and oxidative stress factors. Stress treatments applied were: 52 °C-15 min (Phosphate Buffer pH 7, thermal shock), H2O2 0.1% (p/v) - 30 min (oxidative shock) and NaCl aqueous solution at 17, 25 and 30% (p/v) (room temperature - 1 h, osmotic shock). The osmotic stress was also evaluated on cell growth in MRS broth added of 2, 4, 6, 8 and 10% (p/v) of NaCl, during 20 h at 30 °C. The cell thermal adaptation was performed in MRS broth, selecting 45 °C for 30 min as final conditions for all strains. Two strains (Lp 813 and Lp 998) showed, in general, similar behaviour against the three stress factors, being clearly more resistant than Lp 790. An evident difference in growth kinetics in presence of NaCl was observed between Lp 998 and Lp 813, Lp998 showing a higher optical density (OD570nm) than Lp 813 at the end of the assay. Selected thermal adaptation improved by 2 log orders the thermal resistance of both strains, but cell growth in presence of NaCl was enhanced only in Lp 813. Oxidative resistance was not affected with this thermal pre-treatment. These results demonstrate the relevance of cell technological resistance when selecting presumptive "probiotic" cultures, since different stress factors might considerably affect viability or/and performance of the strains. The incidence of stress conditions on functional properties of the strains used in this work are currently under research in our group. Copyright © 2014 Elsevier Ltd. All rights reserved.

[Development of a simultaneous strain and temperature sensor with small-diameter FBG].

Science.gov (United States)

Liu, Rong-mei; Liang, Da-kai

2011-03-01

Manufacture of the small diameter FBG was designed. Cross sensitivity of temperature and strain at sensing point was solved. Based on coupled-mode theory, optical properties of the designed FBG were studied. The reflection and transmission spectra of the designed FBG in small diameter were studied A single mode optical fiber, whose cladding diameter is 80 microm, was manufactured to a fiber Bragg grating (phi80FBG). According to spectrum simulation, the grating length and period were chosen as the wavelength was 1528 nm. The connector of the small diameter FBG with demodulation was designed too. In applications, the FBG measures the total deformation including strain due to forces applied to the structures as well as thermal expansion. In order to overcome this inconvenience and to measure both parameters at the same time and location, a novel scheme for simultaneous strain and temperature sensor was presented. Since the uniform strength beam has same deformation at all points, a pair of phi80 FBG was attached on a uniform strength cantilever. One of the FBG was on the upper surface, with the other one on the below. Therefore, the strains at the monitoring points were equal in magnitude but of opposite sign. The strain and temperature in sensing point could be discriminated by matrix equation. The determination of the K is not null and thus matrix inversion is well conditioned, even the values for the K elements are close. Consequently, the cross sensitivity of the FBG with temperature and strain can be experimentally solved. Experiments were carried out to study the strain discriminability of small-diameter FBG sensors. The temperature and strain were calculated and the errors were, respectively, 5% and 6%.

A case for bone canaliculi as the anatomical site of strain generated potentials

Science.gov (United States)

Cowin, S. C.; Weinbaum, S.; Zeng, Y.

1995-01-01

We address the question of determining the anatomical site that is the source of the experimentally observed strain generated potentials (SGPs) in bone tissue. There are two candidates for the anatomical site that is the SGP source, the collagen-hydroxyapatite porosity and the larger size lacunar-canalicular porosity. In the past it has been argued, on the basis of experimental data and a reasonable model, that the site of the SGPs in bone is the collagen-hydroxyapatite porosity. The theoretically predicted pore radius necessary for the SGPs to reside in this porosity is 16 nm, which is somewhat larger than the pore radii estimated from gas adsorption data where the preponderance of the pores were estimated to be in the range 5-12.5 nm. However, this pore size is significantly larger than the 2 nm size of the small tracer, microperoxidase, which appears to be excluded from the mineralized matrix. In this work a similar model, but one in which the effects of fluid dynamic drag of the cell surface matrix in the bone canaliculi are included, is used to show that it is possible for the generation of SGPs to be associated with the larger size lacunar-canalicular porosity when the hydraulic drag and electrokinetic contribution of the bone fluid passage through the cell coat (glycocalyx) is considered. The consistency of the SGP data with this model is demonstrated. A general boundary condition is introduced to allow for current leakage at the bone surface. The results suggest that the current leakage is small for the in vitro studies in which the strain generated potentials have been measured.

Study of drain-extended NMOS under electrostatic discharge stress in 28 nm and 40 nm CMOS process

Science.gov (United States)

Wang, Weihuai; Jin, Hao; Dong, Shurong; Zhong, Lei; Han, Yan

2016-02-01

Researches on the electrostatic discharge (ESD) performance of drain-extended NMOS (DeNMOS) under the state-of-the-art 28 nm and 40 nm bulk CMOS process are performed in this paper. Three distinguishing phases of avalanche breakdown stage, depletion region push-out stage and parasitic NPN turn on stage of the gate-grounded DeNMOS (GG-DeNMOS) fabricated under 28 nm CMOS process measured with transmission line pulsing (TLP) test are analyzed through TCAD simulations and tape-out silicon verification detailedly. Damage mechanisms and failure spots of GG-DeNMOS under both CMOS processes are thermal breakdown of drain junction. Improvements based on the basic structure adjustments can increase the GG-DeNMOS robustness from original 2.87 mA/μm to the highest 5.41 mA/μm. Under 40 nm process, parameter adjustments based on the basic structure have no significant benefits on the robustness improvements. By inserting P+ segments in the N+ implantation of drain or an entire P+ strip between the N+ implantation of drain and polysilicon gate to form the typical DeMOS-SCR (silicon-controlled rectifier) structure, the ESD robustness can be enhanced from 1.83 mA/μm to 8.79 mA/μm and 29.78 mA/μm, respectively.

Bilirubin isomer distribution in jaundiced neonates during phototherapy with LED light centered at 497 nm (turquoise) vs. 459 nm (blue).

Science.gov (United States)

Ebbesen, Finn; Madsen, Poul H; Vandborg, Pernille K; Jakobsen, Lasse H; Trydal, Torleif; Vreman, Hendrik J

2016-10-01

Phototherapy using blue light is the treatment of choice worldwide for neonatal hyperbilirubinemia. However, treatment with turquoise light may be a desirable alternative. Therefore, the aim of this randomized, controlled study was to compare the bilirubin isomer distribution in serum of jaundiced neonates after 24 h of therapy with narrow-band (LED) light centered at 497 nm (turquoise) vs. 459 nm (blue), of essentially equal irradiance. Eighty-three neonates (≥33 wk gestational age) with uncomplicated hyperbilirubinemia were included in the study. Forty neonates were exposed to light centered at 497 nm and 43 infants with light centered at 459 nm. Irradiances were 5.2 × 10(15) and 5.1 × 10(15) photons/cm(2)/s, respectively. After 24 h of treatment no significant differences in serum concentrations of total bilirubin isomers and Z,Z-bilirubin were observed between the 2 groups. Interestingly, concentrations of Z,E-bilirubin, and thus also total bilirubin isomers formed during therapy, were highest for infants receiving light centered at 459 nm, while the concentration of E,Z-bilirubin was highest for those receiving light centered at 497 nm. No significant difference was found between concentrations of E,Z-lumirubin. Therapy with LED light centered at 497 nm vs. 459 nm, applied with equal irradiance on the infants, resulted in a different distribution of bilirubin isomers in serum.

Transparent and stretchable strain sensors based on metal nanowire microgrids for human motion monitoring

Science.gov (United States)

Cho, Ji Hwan; Ha, Sung-Hun; Kim, Jong-Man

2018-04-01

Optical transparency is increasingly considered as one of the most important characteristics required in advanced stretchable strain sensors for application in body-attachable systems. In this paper, we present an entirely solution-processed fabrication route to highly transparent and stretchable resistive strain sensors based on silver nanowire microgrids (AgNW-MGs). The AgNW-MG strain sensors are readily prepared by patterning the AgNWs on a stretchable substrate into a MG geometry via a mesh-template-assisted contact-transfer printing. The MG has a unique architecture comprising the AgNWs and can be stretched to ɛ = 35%, with high gauge factors of ˜6.9 for ɛ = 0%-30% and ˜41.1 for ɛ = 30%-35%. The sensor also shows a high optical transmittance of 77.1% ± 1.5% (at 550 nm) and stably maintains the remarkable optical performance even at high strains. In addition, the sensor responses are found to be highly reversible with negligible hysteresis and are reliable even under repetitive stretching-releasing cycles (1000 cycles at ɛ = 10%). The practicality of the AgNW-MG strain sensor is confirmed by successfully monitoring a wide range of human motions in real time after firmly laminating the device onto various body parts.

Influence of anisotropic strain relaxation on the magnetoresistance properties of epitaxial Fe3O4 (110) films

Science.gov (United States)

Sofin, R. G. S.; Wu, Han-Chun; Ramos, R.; Arora, S. K.; Shvets, I. V.

2015-11-01

We studied Fe3O4 (110) films grown epitaxially on MgO (110) substrates using oxygen plasma assisted molecular beam epitaxy. The films with thickness of 30-200 nm showed anisotropic in-plane partial strain relaxation. Magneto resistance (MR) measurements with current and magnetic field along ⟨001⟩ direction showed higher MR compared to ⟨1 ¯ 10 ⟩ direction. Maximum value of MR was measured at Verwey transition temperature for both directions. We explain the observed anisotropy in the MR on the basis of the effects of anisotropic misfit strain, and the difference between the density of antiferromagnetically coupled antiphase boundaries formed along ⟨001⟩ and ⟨1 ¯ 10 ⟩ crystallographic directions, suggesting the dependence of spin polarisation on the anisotropic strain relaxation along the said crystallographic directions.

Utilizing assumption for project of stand for solid state targets activation on inner beams of AIC-144 cyclotron

International Nuclear Information System (INIS)

Petelenz, B.

1997-09-01

General assumptions for project of target activation stand at AIC-144 cyclotron are presented. The project predicts production of 67 Ga, 111 In, 201 Tl, 139 Ce, 88 Y, 123 I and 211 At isotopes using various target backings. Directions concerning target cooling and beam parameters are also described

Removal of sulfamethoxazole, ibuprofen and nitrobenzene by UV and UV/chlorine processes: A comparative evaluation of 275 nm LED-UV and 254 nm LP-UV.

Science.gov (United States)

Kwon, Minhwan; Yoon, Yeojoon; Kim, Seonbaek; Jung, Youmi; Hwang, Tae-Mun; Kang, Joon-Wun

2018-05-15

The aim of this study is to evaluate the micropollutant removal capacity of a 275 nm light-emitting diode (LED)-UV/chlorine system. The sulfamethoxazole, ibuprofen, and nitrobenzene removal efficiencies of this system were compared with those of a conventional 254 nm low-pressure (LP)-UV system as a function of the UV dose. In a direct photolysis system, the photon reactivity of sulfamethoxazole is higher than that of nitrobenzene and ibuprofen at both wavelengths. The molar absorption coefficients and quantum yields of each micropollutant were as follows: sulfamethoxazole (ε SMX, 275 nm protonated  = 17,527 M -1  cm -1 , Φ SMX, 275 nm protonated  = 0.239, ε SMX, 275 nm deprotonated  = 8430 M -1  cm -1 , and Φ SMX, 275 nm deprotonated  = 0.026), nitrobenzene (ε NB, 275 nm  = 7176 M -1  cm -1 and Φ NB, 275 nm  = 0.057), and ibuprofen (ε NB, 275 nm  = 200 M -1  cm -1 and Φ IBF, 275 nm  = 0.067). The photon reactivity of chlorine species, i.e., HOCl and OCl-, were determined at 275 nm (ε HOCl, 275 nm  = 28 M -1  cm -1 , Φ HOCl, 275 nm  = 1.97, ε OCl-, 275 nm  = 245 M -1  cm -1 , and Φ OCl-, 275 nm  = 0.8), which indicate that the decomposition rate of OCl - is higher and that of HOCl is lower by 275 nm photolysis than that by 254 nm photolysis (ε HOCl, 254 nm  = 60 M -1  cm -1 , Φ HOCl, 254 nm  = 1.46, ε OCl-, 254 nm  = 58 M -1  cm -1 , and Φ OCl-, 254 nm  = 1.11). In the UV/chlorine system, the removal rates of ibuprofen and nitrobenzene were increased by the formation of OH and reactive chlorine species. The 275-nm LED-UV/chlorine system has higher radical yields at pH 7 and 8 than the 254 nm LP-UV/chlorine system. Copyright © 2018 Elsevier B.V. All rights reserved.

Cirurgia de revascularização do miocárdio no idoso: estudo descritivo de 144 casos Revascularization surgery of the myocardium in the elderly patients: descriptive study in 144 patients

Directory of Open Access Journals (Sweden)

Maurílio Onofre DEININGER

1999-04-01

Full Text Available Realizamos análise retrospectiva de todos os pacientes com idade igual ou superior a 70 anos, submetidos à operação de revascularização do miocárdio isolada, no período de janeiro de 1992 a dezembro de 1997, objetivando avaliar a morbimortalidade. Do total de 144 pacientes, 92 (63,9% eram do sexo masculino, idade entre 70 e 84 anos, média de 73,51 anos e desvio padrão de 2,82. A grande maioria encontrava-se com angina classe funcional III ou IV (79,16%. Tiveram relação com a ocorrência de maior mortalidade, a presença no período pré-operatório de: obesidade (p = 0,004, insuficiência cardíaca congestiva (classe III/IV - p = 0,03 e/ou infarto agudo do miocárdio (A retrospective analysis involving seventy-year-old patients as well as those over seventy who have undergone CABG as a single procedure, during Jannuary 1992 to December 1997, was carried out with the purpose of assessing their morbidity with mortality. Of the 144 patients, 92 (63.9% were males, aged 70 to 84 (average age 73.51 and standard deviation 2.82. Most of those, 114 (79.16%, suffered from angina belonging to the functional class III or IV. The occurrence in the pre-operative period of obesity (p = 0.004, heart failure (III/IV class - p = 0.03 and/or acute myocardial infection (less than 21 days - p = 0.01 demonstrated a definite relationship with mortality. There were 120 (83.34% patients with lesions in three or more vessels (average 3.48 anastomoses/patients.The pediculate internal mammary artery was employed in 126 patients (87.5% and that rate increased to 98.9% in the last two years. The main complications in the post-operation period leading to death were either infections (p < 0.0001, prolonged ventilatory support (p < 0.0001, renal failure with dialysis (p < 0.0001 and/or low cardiac output (p = 0.003. As to statistical analysis the Student T test, the Chi-square test and Fisher's exact test were used. Surgical mortality totalling 5.5% (8/144 in the

16.7 W 885 nm diode-side-pumped actively Q -switched Nd:YAG/YVO4 intracavity Raman laser at 1176 nm

International Nuclear Information System (INIS)

Jiang, Pengbo; Zhang, Guizhong; Liu, Jian; Ding, Xin; Sheng, Quan; Sun, Bing; Shi, Rui; Wu, Liang; Yao, Jianquan; Yu, Xuanyi; Wang, Rui

2017-01-01

We proposed and experimentally demonstrated the generation of high-power 1176 nm Stokes wave by frequency shifting of a 885 nm diode-side-pumped Nd:YAG laser using a YVO 4 crystal in a Z -shaped cavity configuration. Employing the 885 nm diode-side-pumped scheme and the Z -shaped cavity, for the first time to our knowledge, we realized the thermal management effectively, achieving excellent 1176 nm Stokes wave consequently. With an incident pump power of ∼190.0 W, a maximum average output power of 16.7 W was obtained at the pulse repetition frequency of 10 kHz. The pulse duration and spectrum linewidth of the Stokes wave at the maximum output power were 20.3 ns and ∼0.08 nm, respectively. (paper)

Helicobacter pylori strains from a Nigerian cohort show divergent antibiotic resistance rates and a uniform pathogenicity profile.

Directory of Open Access Journals (Sweden)

Ute Harrison

Full Text Available Antibiotic resistance in Helicobacter pylori is a factor preventing its successful eradication. Particularly in developing countries, resistance against commonly used antibiotics is widespread. Here, we present an epidemiological study from Nigeria with 111 isolates. We analyzed the associated disease outcome, and performed a detailed characterization of these isolated strains with respect to their antibiotic susceptibility and their virulence characteristics. Furthermore, statistical analysis was performed on microbiological data as well as patient information and the results of the gastroenterological examination. We found that the variability concerning the production of virulence factors between strains was minimal, with 96.4% of isolates being CagA-positive and 92.8% producing detectable VacA levels. In addition, high frequency of bacterial resistance was observed for metronidazole (99.1%, followed by amoxicillin (33.3%, clarithromycin (14.4% and tetracycline (4.5%. In conclusion, this study indicated that the infection rate of H. pylori infection within the cohort in the present study was surprisingly low (36.6%. Furthermore, an average gastric pathology was observed by histological grading and bacterial isolates showed a uniform pathogenicity profile while indicating divergent antibiotic resistance rates.

Characterization of strained semiconductor structures using transmission electron microscopy

Energy Technology Data Exchange (ETDEWEB)

Oezdoel, Vasfi Burak

2011-08-15

Today's state-of-the-art semiconductor electronic devices utilize the charge transport within very small volumes of the active device regions. The structural, chemical and optical material properties in these small dimensions can critically affect the performance of these devices. The present thesis is focused on the nanometer scale characterization of the strain state in semiconductor structures using transmission electron microscopy (TEM). Although high-resolution TEM has shown to provide the required accuracy at the nanometer scale, optimization of imaging conditions is necessary for accurate strain measurements. An alternative HRTEM method based on strain mapping on complex-valued exit face wave functions is developed to reduce the artifacts arising from objective lens aberrations. However, a much larger field of view is crucial for mapping strain in the active regions of complex structures like latest generation metal-oxide-semiconductor field-effect transistors (MOSFETs). To overcome this, a complementary approach based on electron holography is proposed. The technique relies on the reconstruction of the phase shifts in the diffracted electron beams from a focal series of dark-field images using recently developed exit-face wave function reconstruction algorithm. Combining high spatial resolution, better than 1 nm, with a field of view of about 1 {mu}m in each dimension, simultaneous strain measurements on the array of MOSFETs are possible. Owing to the much lower electron doses used in holography experiments when compared to conventional quantitative methods, the proposed approach allows to map compositional distribution in electron beam sensitive materials such as InGaN heterostructures without alteration of the original morphology and chemical composition. Moreover, dark-field holography experiments can be performed on thicker specimens than the ones required for high-resolution TEM, which in turn reduces the thin foil relaxation. (orig.)

Comparative Study of the Detection of Chromium Content in Rice Leaves by 532 nm and 1064 nm Laser-Induced Breakdown Spectroscopy

Directory of Open Access Journals (Sweden)

Jiyu Peng

2018-02-01

Full Text Available Fast detection of toxic metals in crops is important for monitoring pollution and ensuring food safety. In this study, laser-induced breakdown spectroscopy (LIBS was used to detect the chromium content in rice leaves. We investigated the influence of laser wavelength (532 nm and 1064 nm excitation, along with the variations of delay time, pulse energy, and lens-to-sample distance (LTSD, on the signal (sensitivity and stability and plasma features (temperature and electron density. With the optimized experimental parameters, univariate analysis was used for quantifying the chromium content, and several preprocessing methods (including background normalization, area normalization, multiplicative scatter correction (MSC transformation and standardized normal variate (SNV transformation were used to further improve the analytical performance. The results indicated that 532 nm excitation showed better sensitivity than 1064 nm excitation, with a detection limit around two times lower. However, the prediction accuracy for both excitation wavelengths was similar. The best result, with a correlation coefficient of 0.9849, root-mean-square error of 3.89 mg/kg and detection limit of 2.72 mg/kg, was obtained using the SNV transformed signal (Cr I 425.43 nm induced by 532 nm excitation. The results indicate the inspiring capability of LIBS for toxic metals detection in plant materials.

Effect of UV irradiation (253.7 nm) on free Legionella and Legionella associated with its amoebae hosts.

Science.gov (United States)

Cervero-Aragó, Sílvia; Sommer, Regina; Araujo, Rosa M

2014-12-15

Water systems are the primary reservoir for Legionella spp., where the bacteria live in association with other microorganisms, such as free-living amoebae. A wide range of disinfection treatments have been studied to control and prevent Legionella colonization but few of them were performed considering its relation with protozoa. In this study, the effectiveness of UV irradiation (253.7 nm) using low-pressure lamps was investigated as a disinfection method for Legionella and amoebae under controlled laboratory conditions. UV treatments were applied to 5 strains of Legionella spp., 4 strains of free-living amoeba of the genera Acanthamoeba and Vermamoeba, treating separately trophozoites and cysts, and to two different co-cultures of Legionella pneumophila with the Acanthamoeba strains. No significant differences in the UV inactivation behavior were observed among Legionella strains tested which were 3 logs reduced for fluences around 45 J/m(2). UV irradiation was less effective against free-living amoebae; which in some cases required up to 990 J/m(2) to obtain the same population reduction. UV treatment was more effective against trophozoites compared to cysts; moreover, inactivation patterns were clearly different between the genus Acanthamoeba and Vermamoeba. For the first time data about Vermamoeba vermiformis UV inactivation has been reported in a study. Finally, the results showed that the association of L. pneumophila with free-living amoebae decreases the effectiveness of UV irradiation against the bacteria in a range of 1.5-2 fold. That fact demonstrates that the relations established between different microorganisms in the water systems can modify the effectiveness of the UV treatments applied. Copyright © 2014 Elsevier Ltd. All rights reserved.

A high power, continuous-wave, single-frequency fiber amplifier at 1091 nm and frequency doubling to 545.5 nm

International Nuclear Information System (INIS)

Stappel, M; Steinborn, R; Kolbe, D; Walz, J

2013-01-01

We present a high power single-frequency ytterbium fiber amplifier system with an output power of 30 W at 1091 nm. The amplifier system consists of two stages, a preamplifier stage in which amplified spontaneous emission is efficiently suppressed (>40 dB) and a high power amplifier with an efficiency of 52%. Two different approaches to frequency doubling are compared. We achieve 8.6 W at 545.5 nm by single-pass frequency doubling in a MgO-doped periodically poled stoichiometric LiTaO 3 crystal and up to 19.3 W at 545.5 nm by frequency doubling with a lithium-triborate crystal in an external enhancement cavity. (paper)

Length-scale and strain rate-dependent mechanism of defect formation and fracture in carbon nanotubes under tensile loading

Energy Technology Data Exchange (ETDEWEB)

Javvaji, Brahmanandam [Indian Institute of Science, Department of Aerospace Engineering (India); Raha, S. [Indian Institute of Science, Department of Computational and Data Sciences (India); Mahapatra, D. Roy, E-mail: droymahapatra@aero.iisc.ernet.in [Indian Institute of Science, Department of Aerospace Engineering (India)

2017-02-15

Electromagnetic and thermo-mechanical forces play a major role in nanotube-based materials and devices. Under high-energy electron transport or high current densities, carbon nanotubes fail via sequential fracture. The failure sequence is governed by certain length scale and flow of current. We report a unified phenomenological model derived from molecular dynamic simulation data, which successfully captures the important physics of the complex failure process. Length-scale and strain rate-dependent defect nucleation, growth, and fracture in single-walled carbon nanotubes with diameters in the range of 0.47 to 2.03 nm and length which is about 6.17 to 26.45 nm are simulated. Nanotubes with long length and small diameter show brittle fracture, while those with short length and large diameter show transition from ductile to brittle fracture. In short nanotubes with small diameters, we observe several structural transitions like Stone-Wales defect initiation, its propagation to larger void nucleation, formation of multiple chains of atoms, conversion to monatomic chain of atoms, and finally complete fracture of the carbon nanotube. Hybridization state of carbon-carbon bonds near the end cap evolves, leading to the formation of monatomic chain in short nanotubes with small diameter. Transition from ductile to brittle fracture is also observed when strain rate exceeds a critical value. A generalized analytical model of failure is established, which correlates the defect energy during the formation of atomic chain with aspect ratio of the nanotube and strain rate. Variation in the mechanical properties such as elastic modulus, tensile strength, and fracture strain with the size and strain rate shows important implications in mitigating force fields and ways to enhance the life of electronic devices and nanomaterial conversion via fracture in manufacturing.

A study of single nucleotide polymorphism in the ystB gene of Yersinia enterocolitica strains isolated from various wild animal species.

Science.gov (United States)

Bancerz-Kisiel, Agata; Szczerba-Turek, Anna; Platt-Samoraj, Aleksandra; Michalczyk, Maria; Szweda, Wojciech

2017-03-01

Y. enterocolitica is the causative agent of yersiniosis. The objective of the article was a study of single nucleotide polymorphism in the ystB gene of Y. enterocolitica strains isolated from various wild animal species. High-resolution melting (HRM) analysis was applied to identify single nucleotide polymorphism (SNP) of ystB gene fragments of 88 Y. enterocolitica biotype 1A strains isolated from wild boar, roe deer, red deer and wild ducks. HRM analysis revealed 14 different melting profiles - 4 of them were defined as regular genotypes (G1, G2, G3, G4), whereas 10 as variations. 24 of the examined Y. enterocolitica strains were classified as G1, 18 strains as a G2, 21 strains as a G3, and 15 strains as a G4. Nucleotide sequences classified as G1 revealed 100% similarity with the Y. enterocolitica D88145.1 sequence (NCBI). Analysis of G2 revealed one point mutation - transition T111A. One mutation was also found in G3, but SNP was placed in a different gene region - transition G193A. Two SNPs - transitions G92C and T111A - were identified in G4. Direct sequencing of 10 variations revealed 5 new variants of the ystB nucleotide sequence: V1 - transition G129A (3 strains); V2 - transitions T111A and G193A (2 strains); V3 - transitions C118T and G193A (1 strain); V4 - transitions C141A and G193A (2 strains); and V5 characterized by 19 SNPs: G83A, T93A, A109G, G114T, C116T, A123G, T134C, T142G, T144C, A150C, G162A, T165G, T170G, T174A, T177G, G178A, A179G, A184G and G193A (2 strains). The predominant genotype in isolates from wild ducks was G1; in red deer G2; in wild boar G3; in roe deer G1 and G4. The proposed HRM method could be used to analyze Y. enterocolitica biotype 1A strains isolated from different sources, including humans.

Trends in nanosecond melanosome microcavitation up to 1540 nm

Science.gov (United States)

Schmidt, Morgan S.; Kennedy, Paul K.; Noojin, Gary D.; Vincelette, Rebecca L.; Thomas, Robert J.; Rockwell, Benjamin A.

2015-09-01

Thresholds for microcavitation of bovine and porcine melanosomes were previously reported, using single nanosecond (ns) laser pulses in the visible (532 nm) and the near-infrared (NIR) from 1000 to 1319 nm. Here, we report average radiant exposure thresholds for bovine melanosome microcavitation at additional NIR wavelengths up to 1540 nm, which range from ˜0.159 J/cm2 at 800 nm to 4.5 J/cm2 at 1540 nm. Melanosome absorption coefficients were also estimated, and decreased with increasing wavelength. These values were compared to retinal pigment epithelium coefficients, and to water absorption, over the same wavelength range. Corneal total intraocular energy retinal damage threshold values were estimated and compared to the previous (2007) and recently changed (2014) maximum permissible exposure (MPE) safe levels. Results provide additional data that support the recent changes to the MPE levels, as well as the first microcavitation data at 1540 nm, a wavelength for which melanosome microcavitation may be an ns-pulse skin damage mechanism.

Experimental Studies of Simultaneous 351 nm and 527 nm Laser Beam Interactions in a Long Scalelength Plasma

International Nuclear Information System (INIS)

Moody, J D; Divol, L; Glenzer, S H; MacKinnon, A J; Froula, D H; Gregori, G; Kruer, W L; Suter, L J; Williams, E A; Bahr, R; Seka, W

2003-01-01

We describe experiments investigating the simultaneous backscattering from 351 nm (3w) and 527 nm (2w) interaction beams in a long scalelength laser-produced plasma for intensities (le) 1 x 10 15 W/cm 2 . Measurements show comparable scattering fractions for both color probe beams. Time resolved spectra of stimulated Raman and Brillouin scattering (SRS and SBS) indicate the effects of laser intensity and smoothing as well as plasma composition and parameters on the scattering levels

Clock Gating Based Energy Efficient and Thermal Aware Design for Vedic Equation Solver on 28nm and 40nm FPGA

DEFF Research Database (Denmark)

Pandey, Bishwajeet; Pandey, Sujeet; Sharma, Shivani

2016-01-01

In this paper, we are integrating clock gating in design of energy efficient equation solver circuits based on Vedic mathematics. Clock gating is one of the best energy efficient techniques. The Sutra 'SunyamSamyasamuccaye' says thatif sum of numerator and sum of denominator is same then we can e......, 94.54% for 1800MHz, and 94.02% for 2.2GHz, when we use gated clock instead of un gated one on 40nm FPGA and temperature is 329.85K. Power consumption in 28nm FPGA is less than 40nm FPGA....

The Use of Water During the Crew 144, Mars Desert Research Station, Utah Desert

Science.gov (United States)

De Morais Mendonca Teles, Antonio

2016-07-01

Well. from November 29th to December 14th, 2014, the author conducted astrobiological and geological surveys, as analog astronaut member of the international Crew 144, at the site of the Mars Society's Mars Desert Research Station, located at a remote location in the Utah desert, United States. The use of water for drinking, bathing, cleaning, etc., in the crew was a major issue for consideration for a human expedition to the planet Mars in the future. The author would like to tell about the factors of the rationalized use of water.

40 CFR 144.87 - How does the identification of ground water protection areas and other sensitive ground water...

Science.gov (United States)

2010-07-01

... responsible for the Underground Injection Control Program. You may call the Safe Drinking Water Hotline at 1... INJECTION CONTROL PROGRAM Requirements for Owners and Operators of Class V Injection Wells § 144.87 How does... Water Source Assessment and Protection Program in your area. You may call the Safe Drinking Water...

Polymer optical fiber strain gauge for human-robot interaction forces assessment on an active knee orthosis

Science.gov (United States)

Leal-Junior, Arnaldo G.; Frizera, Anselmo; Marques, Carlos; Sánchez, Manuel R. A.; Botelho, Thomaz R.; Segatto, Marcelo V.; Pontes, Maria José

2018-03-01

This paper presents the development of a polymer optical fiber (POF) strain gauge based on the light coupling principle, which the power attenuation is created by the misalignment between two POFs. The misalignment, in this case, is proportional to the strain on the structure that the fibers are attached. This principle has the advantages of low cost, ease of implementation, temperature insensitiveness, electromagnetic fields immunity and simplicity on the sensor interrogation and signal processing. Such advantages make the proposed solution an interesting alternative to the electronic strain gauges. For this reason, an analytical model for the POF strain gauge is proposed and validated. Furthermore, the proposed POF sensor is applied on an active orthosis for knee rehabilitation exercises through flexion/extension cycles. The controller of the orthosis provides 10 different levels of robotic assistance on the flexion/extension movement. The POF strain gauge is tested at each one of these levels. Results show good correlation between the optical and electronic strain gauges with root mean squared deviation (RMSD) of 1.87 Nm when all cycles are analyzed, which represents a deviation of less than 8%. For the application, the proposed sensor presented higher stability than the electronic one, which can provide advantages on the rehabilitation exercises and on the inner controller of the device.

YNK1, the yeast homolog of human metastasis suppressor NM23, is required for repair of UV radiation- and etoposide-induced DNA damage

Energy Technology Data Exchange (ETDEWEB)

Yang Mengmeng; Jarrett, Stuart G.; Craven, Rolf [Department of Molecular and Biomedical Pharmacology, College of Medicine, University of Kentucky, Lexington, KY 40536-0298 (United States); Kaetzel, David M. [Department of Molecular and Biomedical Pharmacology, College of Medicine, University of Kentucky, Lexington, KY 40536-0298 (United States)], E-mail: dmkaetz@uky.edu

2009-01-15

In humans, NM23-H1 is a metastasis suppressor whose expression is reduced in metastatic melanoma and breast carcinoma cells, and which possesses the ability to inhibit metastatic growth without significant impact on the transformed phenotype. NM23-H1 exhibits three enzymatic activities in vitro, each with potential to maintain genomic stability, a 3'-5' exonuclease and two kinases, nucleoside diphosphate kinase (NDPK), and protein histidine kinase. Herein we have investigated the potential contributions of NM23 proteins to DNA repair in the yeast, Saccharomyces cerevisiae, which contains a single NM23 homolog, YNK1. Ablation of YNK1 delayed repair of UV- and etoposide-induced nuclear DNA damage by 3-6 h. However, YNK1 had no impact upon the kinetics of MMS-induced DNA repair. Furthermore, YNK1 was not required for repair of mitochondrial DNA damage. To determine whether the nuclear DNA repair deficit manifested as an increase in mutation frequency, the CAN1 forward assay was employed. An YNK1 deletion was associated with increased mutation rates following treatment with either UV (2.6x) or MMS (1.6x). Mutation spectral analysis further revealed significantly increased rates of base substitution and frameshift mutations following UV treatment in the ynk1{delta} strain. This study indicates a novel role for YNK1 in DNA repair in yeast, and suggests an anti-mutator function that may contribute to the metastasis suppressor function of NM23-H1 in humans.

YNK1, the yeast homolog of human metastasis suppressor NM23, is required for repair of UV radiation- and etoposide-induced DNA damage

International Nuclear Information System (INIS)

Yang Mengmeng; Jarrett, Stuart G.; Craven, Rolf; Kaetzel, David M.

2009-01-01

In humans, NM23-H1 is a metastasis suppressor whose expression is reduced in metastatic melanoma and breast carcinoma cells, and which possesses the ability to inhibit metastatic growth without significant impact on the transformed phenotype. NM23-H1 exhibits three enzymatic activities in vitro, each with potential to maintain genomic stability, a 3'-5' exonuclease and two kinases, nucleoside diphosphate kinase (NDPK), and protein histidine kinase. Herein we have investigated the potential contributions of NM23 proteins to DNA repair in the yeast, Saccharomyces cerevisiae, which contains a single NM23 homolog, YNK1. Ablation of YNK1 delayed repair of UV- and etoposide-induced nuclear DNA damage by 3-6 h. However, YNK1 had no impact upon the kinetics of MMS-induced DNA repair. Furthermore, YNK1 was not required for repair of mitochondrial DNA damage. To determine whether the nuclear DNA repair deficit manifested as an increase in mutation frequency, the CAN1 forward assay was employed. An YNK1 deletion was associated with increased mutation rates following treatment with either UV (2.6x) or MMS (1.6x). Mutation spectral analysis further revealed significantly increased rates of base substitution and frameshift mutations following UV treatment in the ynk1Δ strain. This study indicates a novel role for YNK1 in DNA repair in yeast, and suggests an anti-mutator function that may contribute to the metastasis suppressor function of NM23-H1 in humans

Lethal and mutagenic effects of radiation and alkylating agents on two strains of mouse L5178Y cells

International Nuclear Information System (INIS)

Evans, H.H.; Horng, M.; Beer, J.Z.

1986-01-01

The two closely related strains of L5178Y (LY) mouse lymphoma cells, LY-R and LY-S, have been shown to differ in their sensitivity to UV and ionizing radiation. In the present work, the lethal and mutagenic effects of ethyl methanesulfonate (EMS), methyl nitrosourea (MNU) and UV radiation (254 nm) were compared in the two strains. Mutability at the Na + /K + -ATPase locus as well as the HGPRT locus was determined. The authors found strain LY-S to be more resistant than strain LY-R to the lethal effects of UV radiation. In contrast, strain LY-S was more sensitive to the cytotoxic effects of the two alkylating agents. In spite of these differences in sensitivity, the authors found strain LY-S to be less mutable than strain LY-R by all 3 agents at the HGPRT locus. At the Na + /K + -ATPase locus, strain LY-S was also less mutable than strain LY-R by equal concentrations of EMS and UV radiation and by equitoxic concentrations of MNU. However, the difference between the strains was much more pronounced at the HGPRT locus than at the Na + /K + -ATPase locus. The authors have suggested that the interaction of unrepaired lesions in strain LY-S tends to cause an excess of deletions and multilocus effects, which in turn result in a locus-dependent decrease in the recovery of viable LY-S mutant cells. (Auth.)

Diode laser (980nm) cartilage reshaping

Science.gov (United States)

El Kharbotly, A.; El Tayeb, T.; Mostafa, Y.; Hesham, I.

2011-03-01

Loss of facial or ear cartilage due to trauma or surgery is a major challenge to the otolaryngologists and plastic surgeons as the complicated geometric contours are difficult to be animated. Diode laser (980 nm) has been proven effective in reshaping and maintaining the new geometric shape achieved by laser. This study focused on determining the optimum laser parameters needed for cartilage reshaping with a controlled water cooling system. Harvested animal cartilages were angulated with different degrees and irradiated with different diode laser powers (980nm, 4x8mm spot size). The cartilage specimens were maintained in a deformation angle for two hours after irradiation then released for another two hours. They were serially measured and photographed. High-power Diode laser irradiation with water cooling is a cheep and effective method for reshaping the cartilage needed for reconstruction of difficult situations in otorhinolaryngologic surgery. Key words: cartilage,diode laser (980nm), reshaping.

Photoelastic colloidal gel for a high-sensitivity strain sensor

Science.gov (United States)

Pan, Hui; Chen, Zhixin; Zhu, Shenmin; Jiang, Chun; Zhang, Di

2018-04-01

Nanoparticles, having the ability to self-assemble into an ordered structure in their suspensions, analogous to liquid crystals, have attracted extensive attention. Herein, we report a new type of colloidal gel with an ordered crystal structure assembled from 1D and 2D nanoparticles. The material has high elasticity and, more interestingly, it shows significant photoelasticity. Its refractive index can be tuned under external stress and exhibits an ultra-wide dynamic range (Δn) of the order of 10-2. Due to the large Δn, the material shows an extremely high strain sensibility of 720 nm/ɛ, an order of magnitude higher than the reported ones.

Electrochemical characterization of azo dye (E)-1-(4-((4-(phenylamino)phenyl)diazenyl)phenyl)ethanone (DPA)

International Nuclear Information System (INIS)

Surucu, Ozge; Abaci, Serdar; Seferoğlu, Zeynel

2016-01-01

Highlights: • Electrochemical characterization of azo dye DPA was performed. • Pencil graphite electrode was used as working electrode. • Cyclic voltammetry was used to determine the effect of scan rate and pH. • Chronoamperometry was used to determine diffusion constant. • Square wave voltammetry verified the results of cyclic voltammetry. - Abstract: An enormous range of possible dyes are available, especially as the starting molecules are readily available and cheap. As other dye classes become less viable from either an environmental or economic reasons, azo dyes come to the forefront. Therefore, electrochemical characterization of a novel synthesized azo dye (E)-1-(4-((4-(phenylamino) phenyl)diazenyl)phenyl)ethanone was achieved for the first time. Cyclic voltammetry, chronoamperometry and square wave voltammetry techniques were used to investigate the electrochemical behavior and electrocatalytic effect of azo dye (E)-1-(4-((4-(phenylamino) phenyl)diazenyl)phenyl)ethanone at pencil graphite electrode. Cyclic voltammograms were utilized to determine the effect of scan rate and pH on the peak current and peak potential. Chronoamperometry technique was used to determine diffusion constant, D and the type of adsorption isotherms. The kinetics parameters which were the apparent electron transfer rate constant, k s and charge transfer coefficient, α were calculated. Square wave voltammetry was used to verify responses of cyclic voltammetry technique.

XRD analysis of strained Ge-SiGe heterostructures on relaxed SiGe graded buffers grown by hybrid epitaxy on Si(0 0 1) substrates

International Nuclear Information System (INIS)

Franco, N.; Barradas, N.P.; Alves, E.; Vallera, A.M.; Morris, R.J.H.; Mironov, O.A.; Parker, E.H.C.

2005-01-01

Ge/Si 1-x Ge x inverted modulation doped heterostructures with Ge channel thickness of 16 and 20 nm were grown by a method of hybrid epitaxy followed by ex situ annealing at 650 deg. C for p-HMOS application. The thicker layers of the virtual substrate (6000 nm graded SiGe up to x = 0.6 and 1000 nm uniform composition with x = 0.6) were produced by ultrahigh vacuum chemical vapor deposition (UHV-CVD) while the thinner, Si(2 nm)-SiGe(20 nm)-Ge-SiGe(15 nm + 5 nm B-doped + 20 nm) active layers were grown by low temperature solid-source (LT-SS) MBE at T = 350 deg. C. As-grown and annealed samples were measured by X-ray diffraction (XRD). Reciprocal space maps (RSMs) allowed us to determine non-destructively the precise composition (∼1%) and strain of the Ge channel, along with similar information regarding the other layers that made up the whole structure. Layer thickness was determined with complementary high-resolution Rutherford backscattering (RBS) experiments

Comparison of the effects of 665 nm low level diode Laser Hat versus and a combination of 665 nm and 808nm low level diode Laser Scanner of hair growth in androgenic alopecia.

Science.gov (United States)

Barikbin, Behrooz; Khodamrdi, Zeinab; Kholoosi, Leila; Akhgri, Mohammad Reza; Haj Abbasi, Majid; Hajabbasi, Mojgan; Razzaghi, Zahra; Akbarpour, Samaneh

2017-05-17

This study aimed to evaluate the effectiveness of a combined set of low level diode laser scanner (665 nm and 808nm) on hair growth, and assessment of safety and effectiveness of a new laser scanner on hair growth treatment procedure in androgenic alopecia. 90 patients (18 to 70 years) with androgenic alopecia were randomized into three groups. The first group (n=30) received 655 nm red light using laser hat, the second group (n=30) received 655 nm red laser plus 808 nm infrared laser using a laser scanner of hair growth device (with the patent number: 77733) and the third group (n=30) received no laser as the control group. Patients in laser scanner group had better results and showed a higher increase in terminal hair density compared with laser hat group (mean of 9.61 versus 9.16 per cm 2 ). We found significant decrease in terminal hair density from baseline in control group (mean -1.8 per cm 2 , plaser scanner of the hair growth group compared with laser hat and the control group. The study showed that treatment with new laser devise had a promising result without any observable adverse effects.

High-resolution spatiotemporal strain mapping reveals non-uniform deformation in micropatterned elastomers

Science.gov (United States)

Aksoy, B.; Rehman, A.; Bayraktar, H.; Alaca, B. E.

2017-04-01

overcome this challenge and provides a displacement measurement resolution of 116 nm and a strain resolution of 0.04% over a gage length of 300 µm. Similarly, the ability to capture inhomogeneities is demonstrated by mapping strain around a thru-hole. The robustness of the technique is also evaluated, where no appreciable change in strain measurement is observed despite the significant variations imposed on the measurement mesh. The proposed approach introduces critical improvements for the determination of displacement and strain gradients in elastomers regarding the real-time nature of strain mapping with a microscale spatial resolution.

High-resolution spatiotemporal strain mapping reveals non-uniform deformation in micropatterned elastomers

International Nuclear Information System (INIS)

Aksoy, B; Alaca, B E; Rehman, A; Bayraktar, H

2017-01-01

overcome this challenge and provides a displacement measurement resolution of 116 nm and a strain resolution of 0.04% over a gage length of 300 µ m. Similarly, the ability to capture inhomogeneities is demonstrated by mapping strain around a thru-hole. The robustness of the technique is also evaluated, where no appreciable change in strain measurement is observed despite the significant variations imposed on the measurement mesh. The proposed approach introduces critical improvements for the determination of displacement and strain gradients in elastomers regarding the real-time nature of strain mapping with a microscale spatial resolution. (paper)

Evaluation of Strains of Metarhizium anisopliae and Beauveria bassiana against Spodoptera litura on the Basis of Their Virulence, Germination Rate, Conidia Production, Radial Growth and Enzyme Activity.

Science.gov (United States)

Petlamul, Wanida; Prasertsan, Poonsuk

2012-06-01

Ten strains of the entomopathogenic fungi Metarhizium anisopliae and Beauveria bassiana were evaluated to find the most effective strain for optimization studies. The first criterion tested for strain selection was the mortality (> 50%) of Spodoptera litura larvae after inoculation of the fungus for 4 days. Results on several bioassays revealed that B. bassiana BNBCRC showed the most virulence on mortality S. litura larvae (80% mortality). B. bassiana BNBCRC also showed the highest germination rate (72.22%). However, its conidia yield (7.2 × 10(8) conidia/mL) was lower than those of B. bassiana B 14841 (8.3 × 10(8) conidia/mL) and M. anisopliae M6 (8.2 × 10(8) conidia/mL). The highest accumulative radial growth was obtained from the strain B14841 (37.10 mm/day) while the strain BNBCRC showed moderate radial growth (24.40 mm/day). M. anisopliae M6 possessed the highest protease activity (145.00 mU/mL) while M. anisopliae M8 possessed the highest chitinase activity (20.00 mU/mL) during 96~144 hr cultivation. Amongst these criteria, selection based on virulence and germination rate lead to the selection of B. bassiana BNBCRC. B. bassiana B14841 would be selected if based on growth rate while M. anisopliae M6 and M8 possessed the highest enzyme activities.

Immunomagnetic separation combined with colony immunoblotting for selective enrichment and detection of piliated Lactobacillus rhamnosus strains.

Science.gov (United States)

Yang, Z Q; Wei, Y F; Rao, S Q; Gao, L; Yin, Y Q; Xue, F; Fang, W M; Gu, R X; Jiao, X A

2016-11-01

Piliated Lactobacillus rhamnosus (pLR) strains have attracted much attention owing to their excellent mucus adhering capacity and immunomodulatory effects. Here, we aimed to develop a rapid, sensitive method for isolating pLR strains in complex ecosystems using immunomagnetic separation (IMS) with colony immunoblotting (CIB). Magnetic nanobeads (diameter: 180 nm) conjugated with anti-pLR SpaA pilin antibodies (anti-SpaA) were prepared and used to preconcentrate pLR strains in samples, followed by confirmation with anti-SpaA-based CIB analysis. Under optimized experimental conditions, IMS-CIB selectively recovered pLR strains from 10 7  CFU ml -1 of faecal microbiota samples spiked with 2·9 × 10 1 to 2·4 × 10 6  CFU ml -1 of pLR strains. No positive colonies were detected in samples without addition of pLR strains. The detection limit of IMS-CIB was 29 CFU pLR ml -1 of faecal microbiota, which is much lower than that of CIB without IMS preconcentration (2·0 × 10 4  CFU ml -1 ). IMS-CIB allowed selective preconcentration of pLR strains in highly heterogeneous bacterial suspensions and direct detection of pLR colonies, which remained readily available for subsequent isolation. Our findings established an effective method for selective enrichment and detection of pLR strains. © 2016 The Society for Applied Microbiology.

Lack of association between Helicobacter pylori infection with dupA-positive strains and gastroduodenal diseases in Brazilian patients.

Science.gov (United States)

Gomes, Luciana I; Rocha, Gifone A; Rocha, Andreia M C; Soares, Taciana F; Oliveira, Celso A; Bittencourt, Paulo F S; Queiroz, Dulciene M M

2008-04-01

Duodenal ulcer-promoting gene (dupA) was recently described as a new putative Helicobacter pylori virulence marker associated with an increased risk for duodenal ulcer and reduced risk for gastric carcinoma in Japan and Korea. Since differences regarding the association among H. pylori markers and H. pylori-associated diseases have been demonstrated around the world, we evaluated the presence of the gene in 482 strains from Brazilian children (34 with duodenal ulcer and 97 with gastritis) and adults (126 with duodenal ulcer, 144 with gastritis and 81 with gastric carcinoma) by PCR using the described primers and an additional set of primers based on Brazilian strain sequences. The results were confirmed by sequencing. The presence of cagA was investigated by PCR and also included in the analysis. dupA was present in 445 (92.32%) and absent in 29 (6.02%) strains. All samples from children with and without duodenal ulcer were dupA-positive (p=1.0). No association was observed among the strains from adults with gastritis (92.36%), duodenal ulcer (87.30%, p=0.30) and gastric carcinoma (87.65%, p=0.31). Conversely, cagA-positve status remained independently associated with duodenal ulcer (children: odds ratios (OR)=5.58, 95% confidence intervals (CI)=1.67-18.50; adults: OR=3.33, 95% CI=2.14-5.19) and gastric carcinoma (OR=6.58, 95% CI=3.51-12.30) in multivariate analyses. The presence of dupA was significantly higher in strains from children than in those from adults (p=0.01). In conclusion, dupA is highly frequent and not associated with H. pylori-associated diseases in both Brazilian adults and children, which points to regional differences in the distribution of the gene.

Fermentation of African kale (Brassica carinata) using L. plantarum BFE 5092 and L. fermentum BFE 6620 starter strains.

Science.gov (United States)

Oguntoyinbo, Folarin A; Cho, Gyu-Sung; Trierweiler, Bernhard; Kabisch, Jan; Rösch, Niels; Neve, Horst; Bockelmann, Wilhelm; Frommherz, Lara; Nielsen, Dennis S; Krych, Lukasz; Franz, Charles M A P

2016-12-05

Vegetables produced in Africa are sources of much needed micronutrients and fermentation is one way to enhance the shelf life of these perishable products. To prevent post-harvest losses and preserve African leafy vegetables, Lactobacillus plantarum BFE 5092 and Lactobacillus fermentum BFE 6620 starter strains were investigated for their application in fermentation of African kale (Brassica carinata) leaves. They were inoculated at 1×10 7 cfu/ml and grew to a maximum level of 10 8 cfu/ml during 24h submerged fermentation. The strains utilized simple sugars (i.e., glucose, fructose, and sucrose) in the kale to quickly reduce the pH from pH6.0 to pH3.6 within 24h. The strains continued to produce both d and l lactic acid up to 144h, reaching a maximum concentration of 4.0g/l. Fermentations with pathogens inoculated at 10 4 cfu/ml showed that the quick growth of the starters inhibited the growth of Listeria monocytogenes and Salmonella Enteritidis, as well as other enterobacteria. Denaturing gradient gel electrophoresis and 16S rRNA gene (V3-V4-region) amplicon sequencing showed that in the spontaneous fermentations a microbial succession took place, though with marked differences in biodiversity from fermentation to fermentation. The fermentations inoculated with starters however were clearly dominated by both the inoculated strains throughout the fermentations. RAPD-PCR fingerprinting showed that the strains established themselves at approx. equal proportions. Although vitamins C, B 1 and B 2 decreased during the fermentation, the final level of vitamin C in the product was an appreciable concentration of 35mg/100g. In conclusion, controlled fermentation of kale offers a promising avenue to prevent spoilage and improve the shelf life and safety. Copyright © 2016 Elsevier B.V. All rights reserved.

Highly strained InGaAs oxide confined VCSELs emitting in 1.25 μm

International Nuclear Information System (INIS)

Chang, S.J.; Yu, H.C.; Su, Y.K.; Chen, I.L.; Lee, T.D.; Lu, C.M.; Chiou, C.H.; Lee, Z.H.; Yang, H.P.; Sung, C.P.

2005-01-01

Highly strained GaAs-based all-epitaxial oxide confined vertical cavity surface emitting lasers (VCSELs) emitting in 1.25 μm were fabricated. Compared with the designed cavity resonance, it was found that lasing wavelength blue shifted by 29 nm when the driving current was small. The observation of such oxide mode is attributed to the effective optical thickness shrinkage of the oxide layer, and large detuning between the gain peak and cavity resonance

Strain-engineering of the topological insulator HgTe

International Nuclear Information System (INIS)

Leubner, Philipp

2017-01-01

The subject of this thesis is the control of strain in HgTe thin-film crystals. A major task was the experimental control of the strain in the HgTe films. This was achieved by a new epitaxial approach and confirmed by cristallographic analysis and magneto-transport measurements. In this work, strain was induced in thin films by means of coherent epitaxy on substrate crystals. In principle, compressive strain can be achieved by using an appropriate Cd 1-x Zn x Te substrate. This concept was modified and applied in this work. Epilayers have been fabricated by molecular-beam epitaxy (MBE). The growth of thick buffer layers of CdTe on GaAs:Si was established as an alternative to commercial CdTe and Cd 0.96 Zn 0.04 Te substrates. Residual strain was found in the buffer layers, and was attributed to a combination of finite layer thickness and mismatch of the thermal expansion coefficients of CdTe and GaAs. CdTe-Cd 0.5 Zn 0.5 Te strained-layer-superlattices have been grown by a combination of MBE and atomic-layer epitaxy (ALE), and have been analyzed by HRXRD. The crystal quality has been found to degrade with increasing Zn-fraction. HgTe quantum wells (QWs) sandwiched in between CdHgTe barriers have been fabricated in a similar fashion on superlattices and conventional CdTe and Cd 0.96 Zn 0.04 Te substrates. We have determined the QW thickness with an accuracy of ±0.5 nm by an analysis of the beating patterns in the thickness fringes of HRXRD measurements and X-ray reflectometry measurements. We have, for the first time, induced compressive strain in HgTe QWs by an epitaxial technique (i.e. the effective lattice constant of the superlattice is lower compared to the lattice constant of HgTe). The problem of the lattice mismatch between superlattice and barriers has been circumvented by using CdHgTe-ZnHgTe superlattices instead of CdHgTe as a barrier material. Furthermore, the growth of compressively strained HgTe bulk layers (with a thickness of at least 50 nm) was

Strain-engineering of the topological insulator HgTe

Energy Technology Data Exchange (ETDEWEB)

Leubner, Philipp

2017-07-24

The subject of this thesis is the control of strain in HgTe thin-film crystals. A major task was the experimental control of the strain in the HgTe films. This was achieved by a new epitaxial approach and confirmed by cristallographic analysis and magneto-transport measurements. In this work, strain was induced in thin films by means of coherent epitaxy on substrate crystals. In principle, compressive strain can be achieved by using an appropriate Cd{sub 1-x}Zn{sub x}Te substrate. This concept was modified and applied in this work. Epilayers have been fabricated by molecular-beam epitaxy (MBE). The growth of thick buffer layers of CdTe on GaAs:Si was established as an alternative to commercial CdTe and Cd{sub 0.96}Zn{sub 0.04}Te substrates. Residual strain was found in the buffer layers, and was attributed to a combination of finite layer thickness and mismatch of the thermal expansion coefficients of CdTe and GaAs. CdTe-Cd{sub 0.5}Zn{sub 0.5}Te strained-layer-superlattices have been grown by a combination of MBE and atomic-layer epitaxy (ALE), and have been analyzed by HRXRD. The crystal quality has been found to degrade with increasing Zn-fraction. HgTe quantum wells (QWs) sandwiched in between CdHgTe barriers have been fabricated in a similar fashion on superlattices and conventional CdTe and Cd{sub 0.96}Zn{sub 0.04}Te substrates. We have determined the QW thickness with an accuracy of ±0.5 nm by an analysis of the beating patterns in the thickness fringes of HRXRD measurements and X-ray reflectometry measurements. We have, for the first time, induced compressive strain in HgTe QWs by an epitaxial technique (i.e. the effective lattice constant of the superlattice is lower compared to the lattice constant of HgTe). The problem of the lattice mismatch between superlattice and barriers has been circumvented by using CdHgTe-ZnHgTe superlattices instead of CdHgTe as a barrier material. Furthermore, the growth of compressively strained HgTe bulk layers (with a

Effects of strain on the magnetic and transport properties of the epitaxial La0.5Ca0.5MnO3 thin films

Science.gov (United States)

Zarifi, M.; Kameli, P.; Ehsani, M. H.; Ahmadvand, H.; Salamati, H.

2016-12-01

The epitaxial strain can considerably modify the physical properties of thin films compared to the bulk. This paper reports the effects of substrate-induced strain on La0.5Ca0.5MnO3 (LCMO) thin films, grown on (100) SrTiO3 (STO) and LaAlO3 (LAO) substrates by pulsed laser deposition technique. Transport and magnetic properties were found to be strongly dependent on strain type. It is also shown that compressive (tensile) strain leads to the increase (decrease) in the magnetization of the films. Moreover, it was observed that all LCMO films deposited on both LAO and STO substrates behave as an insulator, but LCMO/LAO thin films with compressive strain have lower resistivity than LCMO/STO thin films with tensile strain. Applying magnetic field to LCMO/STO thin films with thickness of 25 and 50 nm leads to very small change in the resistivity, while the effects of magnetic field on the sample with thickness of 125 nm leads to an insulator-metal transition. For LCMO/LAO thin films, the magnetic field has a strong impact on the resistivity of samples. The results show that the magnetoresistance (MR) is enhanced by increasing film thickness for LCMO/LAO samples, due to the relatively stronger phase separation. For LCMO/STO thin films MR is drastically decreased by reduction of film thickness, which is attributed to the enhancement of the charge-orbital order (CO-O) accompanying the complex spin order (the so-called CE type). The changes of the antiferromagnetic structure from the CE to C type and the enhancement of the CE type could be attributed to the in-plane compressive and tensile strain, respectively.

Strain relaxation in epitaxial GaAs/Si (0 0 1) nanostructures

Science.gov (United States)

Kozak, Roksolana; Prieto, Ivan; Arroyo Rojas Dasilva, Yadira; Erni, Rolf; Skibitzki, Oliver; Capellini, Giovanni; Schroeder, Thomas; von Känel, Hans; Rossell, Marta D.

2017-11-01

Crystal defects, present in 100 nm GaAs nanocrystals grown by metal organic vapour phase epitaxy on top of (0 0 1)-oriented Si nanotips (with a tip opening 50-90 nm), have been studied by means of high-resolution aberration-corrected high-angle annular dark-field scanning transmission electron microscopy. The role of 60° perfect, 30° and 90° Shockley partial misfit dislocations (MDs) in the plastic strain relaxation of GaAs on Si is discussed. Formation conditions of stair-rod dislocations and coherent twin boundaries in the GaAs nanocrystals are explained. Also, although stacking faults are commonly observed, we show here that synthesis of GaAs nanocrystals with a minimum number of these defects is possible. On the other hand, from the number of MDs, we have to conclude that the GaAs nanoparticles are fully relaxed plastically, such that for the present tip sizes no substrate compliance can be observed.

Liposucción con diodo láser 980-nm (LSDL 980-nm: optimización de protocolo seguro en cirugía de contorno corporal Body contouring using laser diode 980-nm (LSDL 980-nm assisted lipolysis: a safe procedure

Directory of Open Access Journals (Sweden)

P. Centurión

2011-12-01

Full Text Available La disponibilidad en el mercado de una gran gama de equipos de láser de diferentes potencias y longitudes de onda para su aplicación en el tejido graso, así como la existencia de diversos trabajos científicos sobre el tema con resultados opuestos, han causado gran confusión y dudas sobre la técnica de láser-lipolisis entre los cirujanos plásticos. Presentamos un protocolo quirúrgico de liposucción con diodo-láser de 980-nm (LSDL 980-nm aplicado en 240 pacientes. Evaluamos la seguridad de la técnica según el índice de complicaciones sufrido, así como la evolución en el post-operatorio de los pacientes tratados. Empleamos un equipo diodo-láser-980 nm (ORlight ®, cuya energía llevamos a través de una fibra de 600 μm. Esto se traduce en la aplicación de 99 J por cada cm² de área tratada, con un espesor de hasta 4 cm de tejido adiposo subcutáneo. No tuvimos complicaciones mayores, tipo quemaduras y entre las complicaciones menores, que fueron de un 48.33 % (116 pacientes, encontramos equímosis mínimas (menos del 2 % de superficie corporal. El tiempo que los pacientes requirieron para controlar el dolor postoperatorio fue de entre 1 y 2 días. Consideramos importante la incorporación de la LSDL-980 nm por ser una técnica menos traumática y con bajo índice de complicaciones, que reduce el periodo de recuperación de los pacientes, provoca una importante retracción de la piel y disminuye el dolor postoperatorio.The availability of multiple laser systems on the market with different power and wavelengths and the existence of several scientific papers with contradictory presents, have created great confusion and doubts among plastic surgeons with regard to the laser lipolysis technique. We report a surgical protocol for liposuction diode laser-980 nm (LSDL-980 nm applied to 240 patients. We evaluate the security of the technique according to the complication rate and the postoperative development of patients submitted to

Nearly fully compressed 1053 nm pulses directly obtained from 800 nm laser-seeded photonic crystal fiber below zero dispersion point

Science.gov (United States)

Refaeli, Zaharit; Shamir, Yariv; Ofir, Atara; Marcus, Gilad

2018-02-01

We report a simple robust and broadly spectral-adjustable source generating near fully compressed 1053 nm 62 fs pulses directly out of a highly-nonlinear photonic crystal fiber. A dispersion-nonlinearity balance of 800 nm Ti:Sa 20 fs pulses was obtained initially by negative pre-chirping and then launching the pulses into the fibers' normal dispersion regime. Following a self-phase modulation spectral broadening, some energy that leaked below the zero dispersion point formed a soliton whose central wavelength could be tuned by Self-Frequency-Raman-Shift effect. Contrary to a common approach of power, or, fiber-length control over the shift, here we continuously varied the state of polarization, exploiting the Raman and Kerr nonlinearities responsivity for state of polarization. We obtained soliton pulses with central wavelength tuned over 150 nm, spanning from well below 1000 to over 1150 nm, of which we could select stable pulses around the 1 μm vicinity. With linewidth of > 20 nm FWHM Gaussian-like temporal-shape pulses with 62 fs duration and near flat phase structure we confirmed high quality pulse source. We believe such scheme can be used for high energy or high power glass lasers systems, such as Nd or Yb ion-doped amplifiers and systems.

MicroRNA-144-3p inhibits autophagy activation and enhances Bacillus Calmette-Guérin infection by targeting ATG4a in RAW264.7 macrophage cells.

Science.gov (United States)

Guo, Le; Zhou, Linlin; Gao, Qian; Zhang, Aijun; Wei, Jun; Hong, Dantong; Chu, Yuankui; Duan, Xiangguo; Zhang, Ying; Xu, Guangxian

2017-01-01

MicroRNAs (miRNAs) are small noncoding nucleotides that play major roles in the response of host immune cells. Autophagy plays a key role in activating the antimicrobial host defense against Mycobacterium tuberculosis (M. tuberculosis). Whether miRNAs specifically influence the activation of macrophage autophagy during M. tuberculosis infection is largely unknown. In the present study, we demonstrate that Mycobacterium bovis Bacillus Calmette-Guérin (BCG) infection of macrophages leads to increased expression of miR-144-3p, which targets autophagy-related gene 4a (ATG4a), to inhibit autophagy activation and antimicrobial responses to BCG. Overexpression of miR-144-3p significantly decreased both mRNA and protein levels of ATG4a, inhibited the formation of autophagosomes in RAW264.7 cells and increased intracellular survival of BCG. However, transfection with miR-144-3p inhibitor led to an increase in ATG4a levels, accelerated the autophagic response in macrophages, and decreased BCG survival in macrophages. The experimental results of this study reveal a novel role of miR-144-3p in inhibiting autophagy activation by targeting ATG4a and enhancing BCG infection, and provide potential targets for developing improved treatment.

Liquid Carbon Reflectivity at 19 nm

Directory of Open Access Journals (Sweden)

Riccardo Mincigrucci

2015-01-01

Full Text Available We hereby report on a pump-probe reflectivity experiment conducted on amorphous carbon, using a 780 nm laser as a pump and a 19 nm FEL emission as probe. Measurements were performed at 50 degrees with respect to the surface normal to have an un-pumped reflectivity higher than 0.5%. A sub-10 fs time synchronization error could be obtained exploiting the nearly jitter-free capabilities of FERMI. EUV FEL-based experiments open the way to study the behaviour of a liquid carbon phase being unaffected by plasma screening.

[Isolation and identification of the temperate bacteriophage from isolated strains of Streptococcus suis serotype 2].

Science.gov (United States)

Ma, Yuling; Lu, Chengping; Fan, Hongjie

2008-04-01

A PCR assay was developed to study the distributional characteristics of phage integrase gene in Streptococcus suis serotype 2 (SS2). A 323bp distinct DNA target can be amplified in 25 strains of virulent SS2, while can not be amplified in avirulent strain T15, 5 strains of other serotypes (SS1, SS7, SS9) and strains of group C Streptococcus strains from pigs, which suggested that the phage integrase gene may be related to the pathogenicity of SS2 and can be consider as a detection factor of the virulent gene of SS2. The sequencing and restriction endonuclease analysis of the PCR products were also done. Comparisons between the sequences of phage integrase gene with that of SS2 strain, showed a high homology with SS2 China strains 98HAH33, 05ZYH33 and North American strain 89-1591. Complete cell lysis was observed with SS2 virulent strains but not with avirulent strain T15 after the induction by mitomycin C. Electron microscopy analysis of the lysate from SS2 virulent strains HA9801 and ZY05719 revealed the presence of phage particles. The induced phage, named SS2-HA and SS2-ZY, both have a small isometric nucleocapsid approximately 50 nm in diameter and have no tail and is therefore a member of the Tectiviridae family. The phage integrase gene sequence of phage SS2-HA and SS2-ZY shared high homologue identities with virulent SS2 strains, which suggested that the phage integrase gene of SS2 has high specify. The temperate phage and phage integrase gene can only detected from SS2 virulent strains but not from avirulent strain, and the detection of phage integrase gene was related to the virulence-associate factors of SS2, such as the muramidase-released protein gene (mrp), which suggested that the temperate phage of SS2 may be related to the pathogenicity of SS2.

Enhancement of 800 nm upconversion emission in a thulium doped tellurite microstructured fiber pumped by a 1560 nm femtosecond fiber laser

Energy Technology Data Exchange (ETDEWEB)

Jia, Zhixu; Zheng, Kezhi [State Key Laboratory of Optical Fiber and Cable Manufacture Technology, Yangtze Optical Fiber and Cable Joint Stock Limited Company, Wuhan 430073 (China); State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, Changchun 130012 (China); Yao, Chuanfei; Wang, Shunbin; Qin, Guanshi, E-mail: qings@jlu.edu.cn; Qin, Weiping, E-mail: wpqin@jlu.edu.cn [State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, Changchun 130012 (China); Xiong, Liangming; Luo, Jie; Lv, Dajuan [State Key Laboratory of Optical Fiber and Cable Manufacture Technology, Yangtze Optical Fiber and Cable Joint Stock Limited Company, Wuhan 430073 (China); Ohishi, Yasutake [Research Center for Advanced Photon Technology, Toyota Technological Institute, 2-12-1 Hisakata, Tempaku, Nagoya 468–8511 (Japan)

2016-04-28

We report enhanced upconversion (UC) fluorescence in Tm{sup 3+} doped tellurite microstructured fibers (TDTMFs) fabricated by using a rod-in-tube method. Under the pumping of a 1560 nm femtosecond fiber laser, ultrabroadband supercontinuum light expanding from ∼1050 to ∼2700 nm was generated in a 4 cm long TDTMF. Simultaneously, intense 800 nm UC emission from the {sup 3}H{sub 4} → {sup 3}H{sub 6} transition of Tm{sup 3+} was observed in the same TDTMF. Compared to that pumped by a 1560 nm continuous wave fiber laser, the UC emission intensity was enhanced by ∼4.1 times. The enhancement was due to the spectral broadening in the TDTMF under the pumping of the 1560 nm femtosecond fiber laser.

Antigenicity and Immunogenicity of RV144 Vaccine AIDSVAX Clade E Envelope Immunogen Is Enhanced by a gp120 N-Terminal Deletion

Science.gov (United States)

Liao, Hua-Xin; Tomaras, Georgia D.; Bonsignori, Mattia; Tsao, Chun-Yen; Hwang, Kwan-Ki; Chen, Haiyan; Lloyd, Krissey E.; Bowman, Cindy; Sutherland, Laura; Jeffries, Thomas L.; Kozink, Daniel M.; Stewart, Shelley; Anasti, Kara; Jaeger, Frederick H.; Parks, Robert; Yates, Nicole L.; Overman, R. Glenn; Sinangil, Faruk; Berman, Phillip W.; Pitisuttithum, Punnee; Kaewkungwal, Jaranit; Nitayaphan, Sorachai; Karasavva, Nicos; Rerks-Ngarm, Supachai; Kim, Jerome H.; Michael, Nelson L.; Zolla-Pazner, Susan; Santra, Sampa; Letvin, Norman L.; Harrison, Stephen C.

2013-01-01

An immune correlates analysis of the RV144 HIV-1 vaccine trial revealed that antibody responses to the gp120 V1/V2 region correlated inversely with infection risk. The RV144 protein immunogens (A244-rp120 and MN-rgp120) were modified by an N-terminal 11-amino-acid deletion (Δ11) and addition of a herpes simplex virus (HSV) gD protein-derived tag (gD). We investigated the effects of these modifications on gp120 expression, antigenicity, and immunogenicity by comparing unmodified A244 gp120 with both Δ11 deletion and gD tag and with Δ11 only. Analysis of A244 gp120, with or without Δ11 or gD, demonstrated that the Δ11 deletion, without the addition of gD, was sufficient for enhanced antigenicity to gp120 C1 region, conformational V2, and V1/V2 gp120 conformational epitopes. RV144 vaccinee serum IgGs bound more avidly to A244 gp120 Δ11 than to the unmodified gp120, and their binding was blocked by C1, V2, and V1/V2 antibodies. Rhesus macaques immunized with the three different forms of A244 gp120 proteins gave similar levels of gp120 antibody titers, although higher antibody titers developed earlier in A244 Δ11 gp120-immunized animals. Conformational V1/V2 monoclonal antibodies (MAbs) gave significantly higher levels of blocking of plasma IgG from A244 Δ11 gp120-immunized animals than IgG from animals immunized with unmodified A244 gp120, thus indicating a qualitative difference in the V1/V2 antibodies induced by A244 Δ11 gp120. These results demonstrate that deletion of N-terminal residues in the RV144 A244 gp120 immunogen improves both envelope antigenicity and immunogenicity. PMID:23175357

Effect of addition of V and C on strain recovery characteristics in Fe-Mn-Si alloy

International Nuclear Information System (INIS)

Lin Chengxin; Wang Guixin; Wu Yandong; Liu Qingsuo; Zhang Jianjun

2006-01-01

Shape recoverable strain, recovery stress and low-temperature stress relaxation characteristics in an Fe-17Mn-5Si-10Cr-4Ni (0.08C) alloy and an Fe-17Mn-2Cr-5Si-2Ni-1V (0.23C) alloy have been studied by means of X-ray diffraction, transmission electron microscopy and measurement of recoverable strain and recovery stress. The amount of stress-induced ε martensite under tensile deformation at room temperature, recoverable strain and recovery stress are increased obviously with addition V and C in Fe-Mn-Si alloy, which is owing to the influence of addition V and C on strengthening austenitic matrix. Addition of V and C in Fe-Mn-Si alloy is evidently effective to reduce the degree of low-temperature stress relaxation, for the dispersed VC particles 50-180 nm in size precipitated during annealing restrain the stress induced martensitic transformation

Electrical characteristics of thermal CVD B-doped Si films on highly strained Si epitaxially grown on Ge(100) by plasma CVD without substrate heating

International Nuclear Information System (INIS)

Sugawara, Katsutoshi; Sakuraba, Masao; Murota, Junichi

2010-01-01

Using an 84% relaxed Ge(100) buffer layer formed on Si(100) by electron cyclotron resonance (ECR) plasma enhanced chemical vapor deposition (CVD), influence of strain upon electrical characteristics of B-doped Si film epitaxially grown on the Ge buffer have been investigated. For the thinner B-doped Si film, surface strain amount is larger than that of the thicker film, for example, strain amount reaches 2.0% for the thickness of 2.2 nm. It is found that the hole mobility is enhanced by the introduction of strain to Si, and the maximum enhancement of about 3 is obtained. This value is higher than that of the usually reported mobility enhancement by strain using Si 1 -x Ge x buffer. Therefore, introduction of strain using relaxed Ge film formed by ECR plasma enhanced CVD is useful to improve future Si-based device performance.

Absolute frequency atlas from 915 nm to 985 nm based on laser absorption spectroscopy of iodine