WorldWideScience

Sample records for nonlinear vibration absorber

  1. The nonlinear piezoelectric tuned vibration absorber

    Science.gov (United States)

    Soltani, P.; Kerschen, G.

    2015-07-01

    This paper proposes a piezoelectric vibration absorber, termed the nonlinear piezoelectric tuned vibration absorber (NPTVA), for the mitigation of nonlinear resonances of mechanical systems. The new feature of the NPTVA is that its nonlinear restoring force is designed according to a principle of similarity, i.e., the NPTVA should be an electrical analog of the nonlinear host system. Analytical formulas for the NPTVA parameters are derived using the homotopy perturbation method. Doing so, a nonlinear generalization of Den Hartog’s equal-peak tuning rule is developed for piezoelectric vibration absorbers.

  2. Design of a nonlinear torsional vibration absorber

    Science.gov (United States)

    Tahir, Ammaar Bin

    Tuned mass dampers (TMD) utilizing linear spring mechanisms to mitigate destructive vibrations are commonly used in practice. A TMD is usually tuned for a specific resonant frequency or an operating frequency of a system. Recently, nonlinear vibration absorbers attracted attention of researchers due to some potential advantages they possess over the TMDs. The nonlinear vibration absorber, or the nonlinear energy sink (NES), has an advantage of being effective over a broad range of excitation frequencies, which makes it more suitable for systems with several resonant frequencies, or for a system with varying excitation frequency. Vibration dissipation mechanism in an NES is passive and ensures that there is no energy backflow to the primary system. In this study, an experimental setup of a rotational system has been designed for validation of the concept of nonlinear torsional vibration absorber with geometrically induced cubic stiffness nonlinearity. Dimensions of the primary system have been optimized so as to get the first natural frequency of the system to be fairly low. This was done in order to excite the dynamic system for torsional vibration response by the available motor. Experiments have been performed to obtain the modal parameters of the system. Based on the obtained modal parameters, the design optimization of the nonlinear torsional vibration absorber was carried out using an equivalent 2-DOF modal model. The optimality criterion was chosen to be maximization of energy dissipation in the nonlinear absorber attached to the equivalent 2-DOF system. The optimized design parameters of the nonlinear absorber were tested on the original 5-DOF system numerically. A comparison was made between the performance of linear and nonlinear absorbers using the numerical models. The comparison showed the superiority of the nonlinear absorber over its linear counterpart for the given set of primary system parameters as the vibration energy dissipation in the former is

  3. Nonlinear dynamic vibration absorbers with a saturation

    Science.gov (United States)

    Febbo, M.; Machado, S. P.

    2013-03-01

    The behavior of a new type of nonlinear dynamic vibration absorber is studied. A distinctive characteristic of the proposed absorber is the impossibility to extend the system to infinity. The mathematical formulation is based on a finite extensibility nonlinear elastic potential to model the saturable nonlinearity. The absorber is attached to a single degree-of-freedom linear/nonlinear oscillator subjected to a periodic external excitation. In order to solve the equations of motion and to analyze the frequency-response curves, the method of averaging is used. The performance of the FENE absorber is evaluated considering a variation of the nonlinearity of the primary system, the damping and the linearized frequency of the absorber and the mass ratio. The numerical results show that the proposed absorber has a very good efficiency when the nonlinearity of the primary system increases. When compared with a cubic nonlinear absorber, for a large nonlinearity of the primary system, the FENE absorber shows a better effectiveness for the whole studied frequency range. A complete absence of quasi-periodic oscillations is also found for an appropriate selection of the parameters of the absorber. Finally, direct integrations of the equations of motion are performed to verify the accuracy of the proposed method.

  4. Practical design of a nonlinear tuned vibration absorber

    DEFF Research Database (Denmark)

    Grappasonni, C.; Habib, G.; Detroux, T.

    2014-01-01

    The aim of the paper is to develop a new nonlinear tuned vibration absorber (NLTVA) capable of mitigating the vibrations of nonlinear systems which are known to exhibit frequency-energy-dependent oscillations. A nonlinear generalization of Den Hartog's equal-peak method is proposed to ensure equal...

  5. A principle of similarity for nonlinear vibration absorbers

    Science.gov (United States)

    Habib, G.; Kerschen, G.

    2016-10-01

    This paper develops a principle of similarity for the design of a nonlinear absorber, the nonlinear tuned vibration absorber (NLTVA), attached to a nonlinear primary system. Specifically, for effective vibration mitigation, we show that the NLTVA should feature a nonlinearity possessing the same mathematical form as that of the primary system. A compact analytical formula for the nonlinear coefficient of the absorber is then derived. The formula, valid for any polynomial nonlinearity in the primary system, is found to depend only on the mass ratio and on the nonlinear coefficient of the primary system. When the primary system comprises several polynomial nonlinearities, we demonstrate that the NLTVA obeys a principle of additivity, i.e., each nonlinear coefficient can be calculated independently of the other nonlinear coefficients using the proposed formula.

  6. Practical design of a nonlinear tuned vibration absorber

    DEFF Research Database (Denmark)

    Grappasonni, C.; Habib, G.; Detroux, T.

    2014-01-01

    The aim of the paper is to develop a new nonlinear tuned vibration absorber (NLTVA) capable of mitigating the vibrations of nonlinear systems which are known to exhibit frequency-energy-dependent oscillations. A nonlinear generalization of Den Hartog's equal-peak method is proposed to ensure equal...... peaks in the nonlinear frequency response for a large range of forcing amplitudes. An analytical tuning procedure is developed and provides the load-deflection characteristic of the NLTVA. Based on this prescribed relation, the NLTVA design is performed by two different approaches, namely thanks to (i...

  7. Nonlinear vibration absorption for a flexible arm via a virtual vibration absorber

    Science.gov (United States)

    Bian, Yushu; Gao, Zhihui

    2017-07-01

    A semi-active vibration absorption method is put forward to attenuate nonlinear vibration of a flexible arm based on the internal resonance. To maintain the 2:1 internal resonance condition and the desirable damping characteristic, a virtual vibration absorber is suggested. It is mathematically equivalent to a vibration absorber but its frequency and damping coefficients can be readily adjusted by simple control algorithms, thereby replacing those hard-to-implement mechanical designs. Through theoretical analyses and numerical simulations, it is proven that the internal resonance can be successfully established for the flexible arm, and the vibrational energy of flexible arm can be transferred to and dissipated by the virtual vibration absorber. Finally, experimental results are presented to validate the theoretical predictions. Since the proposed method absorbs rather than suppresses vibrational energy of the primary system, it is more convenient to reduce strong vibration than conventional active vibration suppression methods based on smart material actuators with limited energy output. Furthermore, since it aims to establish an internal vibrational energy transfer channel from the primary system to the vibration absorber rather than directly respond to external excitations, it is especially applicable for attenuating nonlinear vibration excited by unpredictable excitations.

  8. Nonlinear dynamic modeling and resonance tuning of Galfenol vibration absorbers

    Science.gov (United States)

    Scheidler, Justin J.; Dapino, Marcelo J.

    2013-08-01

    This paper investigates the semi-active control of a magnetically-tunable vibration absorber’s resonance frequency. The vibration absorber that is considered is a metal-matrix composite containing the magnetostrictive material Galfenol (FeGa). A single degree of freedom model for the nonlinear vibration of the absorber is presented. The model is valid under arbitrary stress and magnetic field, and incorporates the variation in Galfenol’s elastic modulus throughout the composite as well as Galfenol’s asymmetric tension-compression behavior. Two boundary conditions—cantilevered and clamped-clamped—are imposed on the composite. The frequency response of the absorber to harmonic base excitation is calculated as a function of the operating conditions to determine the composite’s capacity for resonance tuning. The results show that nearly uniform controllability of the vibration absorber’s resonance frequency is possible below a threshold of the input power amplitude using weak magnetic fields of 0-8 kA m-1. Parametric studies are presented to characterize the effect on resonance tunability of Galfenol volume fraction and Galfenol location within the composite. The applicability of the results to composites of varying geometry and containing different Galfenol materials is discussed.

  9. Nonlinear dynamic model for magnetically-tunable Galfenol vibration absorbers

    Science.gov (United States)

    Scheidler, Justin J.; Dapino, Marcelo J.

    2013-03-01

    This paper presents a single degree of freedom model for the nonlinear vibration of a metal-matrix composite manufactured by ultrasonic additive manufacturing that contains seamlessly embedded magnetostrictive Galfenol alloys (FeGa). The model is valid under arbitrary stress and magnetic field. Changes in the composite's natural frequency are quantified to assess its performance as a semi-active vibration absorber. The effects of Galfenol volume fraction and location within the composite on natural frequency are quantified. The bandwidth over which the composite's natural frequency can be tuned with a bias magnetic field is studied for varying displacement excitation amplitudes. The natural frequency is tunable for all excitation amplitudes considered, but the maximum tunability occurs below an excitation amplitude threshold of 1 × 10-6 m for the composite geometry considered. Natural frequency shifts between 6% and 50% are found as the Galfenol volume fraction varies from 25% to 100% when Galfenol is located at the composite neutral axis. At a modest 25% Galfenol by volume, the model shows that up to 15% shifts in composite resonance are possible through magnetic bias field modulation if Galfenol is embedded away from the composite midplane. As the Galfenol volume fraction and distance between Galfenol and composite midplane are increased, linear and quadratic increases in tunability result, respectively.

  10. Design and verification of a hybrid nonlinear MRE vibration absorber for controllable broadband performance

    Science.gov (United States)

    Sun, S. S.; Yildirim, T.; Wu, Jichu; Yang, J.; Du, H.; Zhang, S. W.; Li, W. H.

    2017-09-01

    In this work, a hybrid nonlinear magnetorheological elastomer (MRE) vibration absorber has been designed, theoretically investigated and experimentally verified. The proposed nonlinear MRE absorber has the dual advantages of a nonlinear force-displacement relationship and variable stiffness technology; the purpose for coupling these two technologies is to achieve a large broadband vibration absorber with controllable capability. To achieve a nonlinear stiffness in the device, two pairs of magnets move at a rotary angle against each other, and the theoretical nonlinear force-displacement relationship has been theoretically calculated. For the experimental investigation, the effects of base excitation, variable currents applied to the device (i.e. variable stiffness of the MRE) and semi-active control have been conducted to determine the enhanced broadband performance of the designed device. It was observed the device was able to change resonance frequency with the applied current; moreover, the hybrid nonlinear MRE absorber displayed a softening-type nonlinear response with clear discontinuous bifurcations observed. Furthermore, the performance of the device under a semi-active control algorithm displayed the optimal performance in attenuating the vibration from a primary system to the absorber over a large frequency bandwidth from 4 to 12 Hz. By coupling nonlinear stiffness attributes with variable stiffness MRE technology, the performance of a vibration absorber is substantially improved.

  11. Robust Optimal Design of a Nonlinear Dynamic Vibration Absorber Combining Sensitivity Analysis

    Directory of Open Access Journals (Sweden)

    R.A. Borges

    2010-01-01

    Full Text Available Dynamic vibration absorbers are discrete devices developed in the beginning of the last century used to attenuate the vibrations of different engineering structures. They have been used in several engineering applications, such as ships, power lines, aeronautic structures, civil engineering constructions subjected to seismic induced excitations, compressor systems, etc. However, in the context of nonlinear dynamics, few works have been proposed regarding the robust optimal design of nonlinear dynamic vibration absorbers. In this paper, a robust optimization strategy combined with sensitivity analysis of systems incorporating nonlinear dynamic vibration absorbers is proposed. Although sensitivity analysis is a well known numerical technique, the main contribution intended for this study is its extension to nonlinear systems. Due to the numerical procedure used to solve the nonlinear equations, the sensitivities addressed herein are computed from the first-order finite-difference approximations. With the aim of increasing the efficiency of the nonlinear dynamic absorber into a frequency band of interest, and to augment the robustness of the optimal design, a robust optimization strategy combined with the previous sensitivities is addressed. After presenting the underlying theoretical foundations, the proposed robust design methodology is performed for a two degree-of-freedom system incorporating a nonlinear dynamic vibration absorber. Based on the obtained results, the usefulness of the proposed methodology is highlighted.

  12. Suppression of limit cycle oscillations using the nonlinear tuned vibration absorber

    Science.gov (United States)

    Habib, G.; Kerschen, G.

    2015-01-01

    The objective of this study is to mitigate, or even completely eliminate, the limit cycle oscillations in mechanical systems using a passive nonlinear absorber, termed the nonlinear tuned vibration absorber (NLTVA). An unconventional aspect of the NLTVA is that the mathematical form of its restoring force is not imposed a priori, as it is the case for most existing nonlinear absorbers. The NLTVA parameters are determined analytically using stability and bifurcation analyses, and the resulting design is validated using numerical continuation. The proposed developments are illustrated using a Van der Pol–Duffing primary system. PMID:27547085

  13. Performance, robustness and sensitivity analysis of the nonlinear tuned vibration absorber

    Science.gov (United States)

    Detroux, T.; Habib, G.; Masset, L.; Kerschen, G.

    2015-08-01

    The nonlinear tuned vibration absorber (NLTVA) is a recently developed nonlinear absorber which generalizes Den Hartog's equal peak method to nonlinear systems. If the purposeful introduction of nonlinearity can enhance system performance, it can also give rise to adverse dynamical phenomena, including detached resonance curves and quasiperiodic regimes of motion. Through the combination of numerical continuation of periodic solutions, bifurcation detection and tracking, and global analysis, the present study identifies boundaries in the NLTVA parameter space delimiting safe, unsafe and unacceptable operations. The sensitivity of these boundaries to uncertainty in the NLTVA parameters is also investigated.

  14. Synchronous and non-synchronous responses of systems with multiple identical nonlinear vibration absorbers

    Science.gov (United States)

    Issa, Jimmy S.; Shaw, Steven W.

    2015-07-01

    In this work we investigate the nonlinear dynamic response of systems composed of a primary inertia to which multiple identical vibration absorbers are attached. This problem is motivated by observations of systems of centrifugal pendulum vibration absorbers that are designed to reduce engine order torsional vibrations in rotating systems, but the results are relevant to translational systems as well. In these systems the total absorber mass is split into multiple equal masses for purposes of distribution and/or balance, and it is generally expected that the absorbers will act in unison, corresponding to a synchronous response. In order to capture nonlinear effects of the responses of the absorbers, specifically, their amplitude-dependent frequency, we consider them to possess nonlinear stiffness. The equations of motion for the system are derived and it is shown how one can uncouple the equations for the absorbers from that for the primary inertia, resulting in a system of identical resonators that are globally coupled. These symmetric equations are scaled for weak nonlinear effects, near resonant forcing, and small damping. The method of averaging is applied, from which steady-state responses and their stability are investigated. The response of systems with two, three, and four absorbers are considered in detail, demonstrating a rich variety of bifurcations of the synchronous response, resulting in responses with various levels of symmetry in which sub-groups of absorbers are mutually synchronous. It is also shown that undamped models with more than two absorbers possess a degenerate response, which is made robust by the addition of damping to the model. Design guidelines are proposed based on the nature of the system response, with the aim of minimizing the acceleration of the primary system. It is shown that the desired absorber parameters are selected so that the system achieves a stable synchronous response which does not undergo jumps via saddle

  15. A review of development and implementation of an active nonlinear vibration absorber

    Energy Technology Data Exchange (ETDEWEB)

    Oueini, S.S.; Nayfeh, A.H. [Virginia Polytechnic Inst. and State Univ., Blacksburg, VA (United States). Dept. of Engineering Science and Mechanics; Pratt, J.R. [Manufacturing Engineering Laboratory, National Institute of Standards and Technology, Gaithersburg, MD 20899-001 (United States)

    1999-10-01

    We present an account of an implementation of an active nonlinear vibration absorber that we have developed. The control technique exploits the saturation phenomenon that is known to occur in quadratically-coupled multi-degree-of-freedom systems subjected to primary excitation and possessing a two-to-one internal resonance. The technique is based on introducing an absorber and coupling it with the structure through a sensor and an actuator, where the feedback and control signals are quadratic. First, we consider the case of controlling the vibrations of a single-degree-of-freedom system. We develop the equations governing the response of the closed-loop system and use the method of multiple scales to obtain an approximate solution. We investigate the performance of the control strategy by studying its steady-state and transient characteristics. Additionally, we compare the performance of the quadratic absorber with that of a linear absorber. Then, we present theoretical and experimental results that demonstrate the versatility of the technique. We design an electronic circuit to emulate the absorber and use a variety of sensors and actuators to implement the active control strategy. First, we use a motor and a potentiometer to control the vibration of a rigid beam. We develop a plant model that includes Coulomb friction and demonstrate that the closed-loop system exhibits the saturation phenomenon. Second, we extend the strategy to multi-degree-of-freedom systems. We use PZT ceramics and strain gages to suppress vibrations of flexible steel beams when subjected to single- and simultaneous two-mode excitations. Third, we employ Terfenol-D, a nonlinear actuator, and accelerometers to control the vibrations of flexible beams. In all instances, the technique is successful in reducing the response amplitude of the structures. (orig.)

  16. Analytic Formulation for the Sound Absorption of a Panel Absorber under the Effects of Microperforation, Air Pumping, Linear Vibration and Nonlinear Vibration

    Directory of Open Access Journals (Sweden)

    Y. Y. Lee

    2014-01-01

    Full Text Available This study includes the first work about the absorption of a panel absorber under the effects of microperforation, air pumping, and linear and nonlinear vibrations. In practice, thin perforated panel absorber is backed by a flexible wall to enhance the acoustic performance within the room. The panel is easily excited to vibrate nonlinearly and the wall can vibrate linearly. However, the assumptions of linear panel vibration and no wall vibration are adopted in many research works. The development of the absorption formula is based on the classical approach and the electroacoustic analogy, in which the impedances of microperforation, air pumping, and linear and nonlinear vibrations are in parallel and connected to that of the air cavity in series. Unlike those finite element, numerical integration, and multiscale solution methods and so forth, the analytic formula to calculate the absorption of a panel absorber does not require heavy computation effort and is suitable for engineering calculation purpose. The theoretical result obtained from the proposed method shows reasonable agreement with that from a previous numerical integration method. It can be concluded that the overall absorption bandwidth of a panel absorber with an appropriate configuration can be optimized and widened by making use of the positive effects of microperforation, air pumping, and panel vibration.

  17. Response attenuation in a large-scale structure subjected to blast excitation utilizing a system of essentially nonlinear vibration absorbers

    Science.gov (United States)

    Wierschem, Nicholas E.; Hubbard, Sean A.; Luo, Jie; Fahnestock, Larry A.; Spencer, Billie F.; McFarland, D. Michael; Quinn, D. Dane; Vakakis, Alexander F.; Bergman, Lawrence A.

    2017-02-01

    Limiting peak stresses and strains in a structure subjected to high-energy, short-duration transient loadings, such as blasts, is a challenging problem, largely due to the well-known insensitivity of the first few cycles of the structural response to damping. Linear isolation, while a potential solution, requires a very low fundamental natural frequency to be effective, resulting in large nearly-rigid body displacement of the structure, while linear vibration absorbers have little or no effect on the early-time response where relative motions, and thus stresses and strains, are at their highest levels. The problem has become increasingly important in recent years with the expectation of blast-resistance as a design requirement in new construction. In this paper, the problem is examined experimentally and computationally in the context of offset-blast loading applied to a custom-built nine story steel frame structure. A fully-passive response mitigation system consisting of six lightweight, essentially nonlinear vibration absorbers (termed nonlinear energy sinks - NESs) is optimized and deployed on the upper two floors of this structure. Two NESs have vibro-impact nonlinearities and the other four possess smooth but essentially nonlinear stiffnesses. Results of the computational and experimental study demonstrate the efficacy of the proposed passive nonlinear mitigation system to rapidly and efficiently attenuate the global structural response, even at early time (i.e., starting at the first response cycle), thus minimizing the peak demand on the structure. This is achieved by nonlinear redistribution of the blast energy within the modal space through low-to-high energy scattering due to the action of the NESs. The experimental results validate the theoretical predictions.

  18. Nonlinear Dynamical Analysis on Four Semi-Active Dynamic Vibration Absorbers with Time Delay

    Directory of Open Access Journals (Sweden)

    Yongjun Shen

    2013-01-01

    Full Text Available In this paper four semi-active dynamic vibration absorbers (DVAs are analytically studied, where the time delay induced by measurement and execution in control procedure is included in the system. The first-order approximate analytical solutions of the four semi-active DVAs are established by the averaging method, based on the illustrated phase difference of the motion parameters. The comparisons between the analytical and the numerical solutions are carried out, which verify the correctness and satisfactory precision of the approximate analytical solutions. Then the effects of the time delay on the dynamical responses are analyzed, and it is found that the stability conditions for the steady-state responses of the primary systems are all periodic functions of time delay, with the same period as the excitation one. At last the effects of time delay on control performance are discussed.

  19. Neural network consistent empirical physical formula construction for density functional theory based nonlinear vibrational absorbance and intensity of 6-choloronicotinic acid molecule.

    Science.gov (United States)

    Yildiz, Nihat; Karabacak, Mehmet; Kurt, Mustafa; Akkoyun, Serkan

    2012-05-01

    Being directly related to the electric charge distributions in a molecule, the vibrational spectra intensities are both experimentally and theoretically important physical quantities. However, these intensities are inherently highly nonlinear and of complex pattern. Therefore, in particular for unknown detailed spatial molecular structures, it is difficult to make ab initio intensity calculations to compare with new experimental data. In this respect, we very recently initiated entirely novel layered feedforward neural network (LFNN) approach to construct empirical physical formulas (EPFs) for density functional theory (DFT) vibrational spectra of some molecules. In this paper, as a new and far improved contribution to our novel molecular vibrational spectra LFNN-EPF approach, we constructed LFFN-EPFs for absorbances and intensities of 6-choloronicotinic acid (6-CNA) molecule. The 6-CNA data, borrowed from our previous study, was entirely different and much larger than the vibrational intensity data of our formerly used LFNN-EPF molecules. In line with our another previous work which theoretically proved the LFNN relevance to EPFs, although the 6-CNA DFT absorbance and intensity were inherently highly nonlinear and sharply fluctuating in character, still the optimally constructed train set LFFN-EPFs very successfully fitted the absorbances and intensities. Moreover, test set (i.e. yet-to-be measured experimental data) LFNN-EPFs consistently and successfully predicted the absorbance and intensity data. This simply means that the physical law embedded in the 6-CNA vibrational data was successfully extracted by the LFNN-EPFs. In conclusion, these vibrational LFNN-EPFs are of explicit form. Therefore, by various suitable operations of mathematical analysis, they can be used to estimate the electronic charge distributions of the unknown molecule of the significant complexity. Additionally, these estimations can be combined with those of theoretical DFT atomic polar

  20. Dynamic Vibration Absorber with Negative Stiffness for Rotor System

    Directory of Open Access Journals (Sweden)

    Hongliang Yao

    2016-01-01

    Full Text Available To suppress the vibration of a rotor system, a vibration absorber combining negative stiffness with positive stiffness together is proposed in this paper. Firstly, the negative stiffness producing mechanism using ring type permanent magnets is presented and the characteristics of the negative stiffness are analyzed. Then, the structure of the absorber is proposed; the principles and nonlinear dynamic characteristics of the absorber-rotor system are studied numerically. Finally, experiments are carried out to verify the numerical conclusions. The results show that the proposed vibration absorber is effective to suppress the vibration of the rotor system, the nonlinearity of the negatives stiffness affects the vibration suppression effect little, and the negative stiffness can broaden the effective vibration control frequency range of the absorber.

  1. Linear and nonlinear piezoelectric shunting strategies for vibration mitigation

    Directory of Open Access Journals (Sweden)

    Soltani P.

    2014-01-01

    Full Text Available This paper studies linear and nonlinear piezoelectric vibration absorbers that are designed based on the equal-peak method. A comparison between the performance of linear mechanical and electrical tuned vibration absorbers coupled to a linear oscillator is first performed. Nonlinearity is then introduced in the primary oscillator to which a new nonlinear electrical tuned vibration absorber is attached. Despite the frequency-energy dependence of nonlinear oscillations, we show that the nonlinear absorber is capable of effectively mitigating the vibrations of the nonlinear primary system in a large range of forcing amplitudes.

  2. On the undamped vibration absorber with cubic stiffness characteristics

    Science.gov (United States)

    Gatti, G.

    2016-09-01

    In order to improve the performance of a vibration absorber, a nonlinear spring can be used on purpose. This paper presents an analytical insight on the characteristics of an undamped nonlinear vibration absorber when it is attached to a linear spring-mass-damper oscillator. In particular, the nonlinear attachment is modelled as a Duffing's oscillator with a spring characteristics having a linear positive stiffness term plus a cubic stiffness term. The effects of the nonlinearity, mass ratio and frequency ratio are investigated based on an approximate analytical formulation of the amplitude-frequency equation. Comparisons to the linear case are shown in terms of the frequency response curves. The nonlinear absorber seems to show an improved robustness to mistuning respect to the corresponding linear device. However, such a better robustness may be limited by some instability of the expected harmonic response.

  3. Adaptive Piezoelectric Absorber for Active Vibration Control

    Directory of Open Access Journals (Sweden)

    Sven Herold

    2016-02-01

    Full Text Available Passive vibration control solutions are often limited to working reliably at one design point. Especially applied to lightweight structures, which tend to have unwanted vibration, active vibration control approaches can outperform passive solutions. To generate dynamic forces in a narrow frequency band, passive single-degree-of-freedom oscillators are frequently used as vibration absorbers and neutralizers. In order to respond to changes in system properties and/or the frequency of excitation forces, in this work, adaptive vibration compensation by a tunable piezoelectric vibration absorber is investigated. A special design containing piezoelectric stack actuators is used to cover a large tuning range for the natural frequency of the adaptive vibration absorber, while also the utilization as an active dynamic inertial mass actuator for active control concepts is possible, which can help to implement a broadband vibration control system. An analytical model is set up to derive general design rules for the system. An absorber prototype is set up and validated experimentally for both use cases of an adaptive vibration absorber and inertial mass actuator. Finally, the adaptive vibration control system is installed and tested with a basic truss structure in the laboratory, using both the possibility to adjust the properties of the absorber and active control.

  4. Performance of Nonlinear Mechanical, Resonant-Shunted Piezoelectric, and Electronic Vibrations Absorbers for Multi-Degree-of-Freedom Structures

    Science.gov (United States)

    2011-07-21

    cowork- ers in the Mechanical Systems Lab. Thanks to Mauro, Dino, Clay, Eric, Debbie, Jens, and Marca for their discussions and assistance with...through static equilibrium simultaneously. iii. Displacement of one mass uniquely defines the displacements of all masses. These criteria are analogous to...be greater. Shaw and Pierre [10, 11] present an alternative definition of nonlinear normal modes, defined for both conservative and dissipative systems

  5. Distributed Absorber for Noise and Vibration Control

    Directory of Open Access Journals (Sweden)

    Michel Azoulay

    2011-01-01

    Full Text Available An approach to a wide-band frequency passive vibration attenuation is introduced in this paper. This aims to suppress noise and vibration of extended multimode objects like plates, panels and shells. The absorber is arranged in the form of a single-layer assembly of small inertial bodies (balls being distributed and moulded within the light visco-elastic media (e.g. silicone resin. The absorber as a whole is embedded into object face covering the critical patches of the system surface. For the purpose of characterization, the authors introduced the complex frequency response function relating the volume velocity produced by the vibrating object surface (response stimulated by a point-wise force (stimulus applied to a particular point. The simulation and optimization of the main frequency characteristics has been performed using a full scale 3-dimensional Finite Element model. These revealed some new dynamic features of absorber's structures, which can contribute to vibration attenuation. A full-scale physical experimentation with synthesised absorber's structures confirmed the main results of simulation and has shown significant noise reduction over a staggering 0–20 kHz frequency band. This was achieved with a negligible weight and volume penalty due to the addition of the absorber. The results can find multiple applications in noise and vibration control of different structures. Some examples of such applications are presented.

  6. Distributed electric absorbers of beam vibrations

    Science.gov (United States)

    dell'lsola, Francesco; Del Vescovo, Dionisio; Maurini, Corrado

    2003-07-01

    Several electric vibration absorbers based on distributed piezoelectric control of beam vibrations are studied. The damping devices are conceived by interconnecting with different modular electric networks an array of piezoelectric transducers uniformly distributed on a beam. Five different vibration absorbers made of five different network interconnecting topologies are considered and their damping performances are analyzed and compared. The analysis is based on homogenized models of modular piezo-electromechanical systems. The optimal parameters of these absorbers are found by adopting the criterion of critical damping of waves with a single wave number. We show that: i) there is an interconnecting network providing an optimal multimodal damping; ii) the performances required to the electr(on)ic components can be significantly decreased by increasing the number (and decreasing the dimensions) of the piezoelectric transducers.

  7. Optimally tuned vibration absorbers to control sound transmission

    Science.gov (United States)

    Grissom, Michael; Belegundu, Ashok; Koopmann, Gary

    2002-05-01

    A design optimization method is proposed for controlling broadband vibration of a structure and it concomitant acoustic radiation using multiple-tuned absorbers. A computationally efficient model of a structure is developed and coupled with a nonlinear optimization search algorithm. The eigenvectors of the original structure are used as repeated basis functions in the analysis of the structural dynamic re-analysis problem. The re-analysis time for acoustic power computations is reduced by calculating and storing modal radiation resistance matrices at discrete frequencies. The matrices are then interpolated within the optimization loop for eigenvalues that fall between stored frequencies. The method is demonstrated by applying multiple-tuned vibration absorbers to an acoustically-excited composite panel. The absorber parameters are optimized with an objective of maximizing the panel's sound power transmission loss. It is shown that in some cases the optimal solution includes vibration absorbers that are tuned very closely in frequency, thus acting effectively as a broadband vibration absorber (BBVA). The numerical model and design optimization method are validated experimentally, and the BBVA is found to be an effective noise abatement tool.

  8. Optimal active vibration absorber - Design and experimental results

    Science.gov (United States)

    Lee-Glauser, Gina; Juang, Jer-Nan; Sulla, Jeffrey L.

    1993-01-01

    An optimal active vibration absorber can provide guaranteed closed-loop stability and control for large flexible space structures with collocated sensors/actuators. The active vibration absorber is a second-order dynamic system which is designed to suppress any unwanted structural vibration. This can be designed with minimum knowledge of the controlled system. Two methods for optimizing the active vibration absorber parameters are illustrated: minimum resonant amplitude and frequency matched active controllers. The Controls-Structures Interaction Phase-1 Evolutionary Model at NASA LaRC is used to demonstrate the effectiveness of the active vibration absorber for vibration suppression. Performance is compared numerically and experimentally using acceleration feedback.

  9. Optimal active vibration absorber: Design and experimental results

    Science.gov (United States)

    Lee-Glauser, Gina; Juang, Jer-Nan; Sulla, Jeffrey L.

    1992-01-01

    An optimal active vibration absorber can provide guaranteed closed-loop stability and control for large flexible space structures with collocated sensors/actuators. The active vibration absorber is a second-order dynamic system which is designed to suppress any unwanted structural vibration. This can be designed with minimum knowledge of the controlled system. Two methods for optimizing the active vibration absorber parameters are illustrated: minimum resonant amplitude and frequency matched active controllers. The Controls-Structures Interaction Phase-1 Evolutionary Model at NASA LaRC is used to demonstrate the effectiveness of the active vibration absorber for vibration suppression. Performance is compared numerically and experimentally using acceleration feedback.

  10. Vibration control of ultrasonic cutting via dynamic absorber

    Energy Technology Data Exchange (ETDEWEB)

    Amer, Y.A. [Department of Mathematics, Faculty of Science, Zagazig University, Zagazig (Egypt)]. E-mail: yasser31270@yahoo.com

    2007-08-15

    Ultrasonic machining (USM) is one of the most effective non-conventional techniques. Its application especially to hard-to-machine material (HTM) is growing rapidly. The main operation condition of USM is at resonance where an exciter derives a tuned blade or a tool. In this paper, the coupling of two non-linear oscillators of the main system and absorber representing ultrasonic cutting process are investigated. This leads to a two-degree-of-freedom Duffing's oscillator in which such non-linear effects can be neutralized under certain dynamic conditions. The aim of this work is the control of the system behavior at principal parametric resonance condition where the system damage is probable. An approximate solution is derived up to the second order for the coupled system. A threshold value of linear damping has been obtained, where the system vibration can be reduced dramatically. The stability of the system is investigated applying both phase-plane and frequency response techniques. The effects of the different parameters of the absorber on system behavior are studied numerically. Comparison with the available published work is reported.

  11. Toward an adjustable nonlinear low frequency acoustic absorber

    Science.gov (United States)

    Mariani, R.; Bellizzi, S.; Cochelin, B.; Herzog, P.; Mattei, P. O.

    2011-10-01

    A study of the targeted energy transfer (TET) phenomenon between an acoustic resonator and a thin viscoelastic membrane has recently been presented in the paper [R. Bellet et al., Experimental study of targeted energy transfer from an acoustic system to a nonlinear membrane absorber, Journal of Sound and Vibration 329 (2010) 2768-2791], providing a new path to passive sound control in the low frequency domain where no efficient dissipative device exists. This paper presents experimental results showing that a loudspeaker used as a suspended piston working outside its range of linearity can also be used as a nonlinear acoustic absorber. The main advantage of this technology of absorber is the perspective to adjust independently the device parameters (mass, nonlinear stiffness and damping) according to the operational conditions. To achieve this purpose, quasi-static and dynamic tests have been performed on three types of commercial devices (one with structural modifications), in order to define the constructive characteristics that it should present. An experimental setup has been developed using a one-dimensional acoustic linear system coupled through a box (acting as a weak spring) to a loudspeaker used as a suspended piston acting as an essentially nonlinear oscillator. The tests carried out on the whole vibro-acoustic system have showed the occurrence of the acoustic TET from the acoustic media to the suspended piston and demonstrated the efficiency of this new kind of absorber at low frequencies over a wide frequency range. Moreover, the experimental analyses conducted with different NES masses have confirmed that it is possible to optimize the noise absorption with respect to the excitation level of the acoustic resonator.

  12. Multi-objective optimization of acoustic black hole vibration absorbers.

    Science.gov (United States)

    Shepherd, Micah R; Feurtado, Philip A; Conlon, Stephen C

    2016-09-01

    Structures with power law tapers exhibit the acoustic black hole (ABH) effect and can be used for vibration reduction. However, the design of ABHs for vibration reduction requires consideration of the underlying theory and its regions of validity. To address the competing nature of the best ABH design for vibration reduction and the underlying theoretical assumptions, a multi-objective approach is used to find the lowest frequency where both criteria are sufficiently met. The Pareto optimality curve is estimated for a range of ABH design parameters. The optimal set could then be used to implement an ABH vibration absorber.

  13. Modeling of the vibrating beam accelerometer nonlinearities

    Science.gov (United States)

    Romanowski, P. A.; Knop, R. C.

    Successful modeling and processing of the output of a quartz Vibrating Beam Accelerometer (VBA), whose errors are inherently nonlinear with respect to input acceleration, are reported. The VBA output, with two signals that are frequencies of vibrating quartz beams, has inherent higher-order terms. In order to avoid vibration rectification errors, the signal output must be sampled at a rapid rate and the output must be reduced using a nonlinear model. The present model, with acceleration as a function of frequency, is derived by a least-squares process where the covariance matrix is obtained from simulated data. The system performance is found to be acceptable to strategic levels, and it is shown that a vibration rectification error of 400 micrograms/sq g can be reduced to 4 micrograms/sq g by using the processor electronics and a nonlinear model.

  14. Semi-active vibration absorber based on real-time controlled MR damper

    Science.gov (United States)

    Weber, F.

    2014-06-01

    A semi-active vibration absorber with real-time controlled magnetorheological damper (MR-SVA) for the mitigation of harmonic structural vibrations is presented. The MR damper force targets to realize the frequency and damping adaptations to the actual structural frequency according to the principle of the undamped vibration absorber. The relative motion constraint of the MR-SVA is taken into account by an adaptive nonlinear control of the internal damping of the MR-SVA. The MR-SVA is numerically and experimentally validated for harmonic excitation of the primary structure when the natural frequency of the passive mass spring system of the MR-SVA is correctly tuned to the targeted structural resonance frequency and when de-tuning is present. The results demonstrate that the MR-SVA outperforms the passive TMD at structural resonance frequency by at least 12.4% and up to 60.0%.

  15. Dynamics and vibrations progress in nonlinear analysis

    CERN Document Server

    Kachapi, Seyed Habibollah Hashemi

    2014-01-01

    Dynamical and vibratory systems are basically an application of mathematics and applied sciences to the solution of real world problems. Before being able to solve real world problems, it is necessary to carefully study dynamical and vibratory systems and solve all available problems in case of linear and nonlinear equations using analytical and numerical methods. It is of great importance to study nonlinearity in dynamics and vibration; because almost all applied processes act nonlinearly, and on the other hand, nonlinear analysis of complex systems is one of the most important and complicated tasks, especially in engineering and applied sciences problems. There are probably a handful of books on nonlinear dynamics and vibrations analysis. Some of these books are written at a fundamental level that may not meet ambitious engineering program requirements. Others are specialized in certain fields of oscillatory systems, including modeling and simulations. In this book, we attempt to strike a balance between th...

  16. Design of Hybrid Dynamic Balancer and Vibration Absorber

    Directory of Open Access Journals (Sweden)

    Y. R. Wang

    2014-01-01

    Full Text Available This study proposed a novel hybrid dynamic balancer and vibration absorber that is cheaper than active dampers and more effective than passive dampers. The proposed damping system does not need to be altered structurally to deal with different damping targets. Rather, the proposed vibration absorber is capable of self-adjustment to the optimal damping location in order to achieve balance and, thereby, optimize damping effects. The proposed device includes a groove under the damping target with inertial mass hung from a coil spring beneath. This allows the device to bounce vertically or rotate in order to reduce vibrations in the main body. The coil spring vibration absorber can also slide along the groove in order to adjust its location continuously until the vibrations in the system are minimized and the main body is balanced. Experiments verify the efficacy of the proposed device in improving damping performance beyond what has been achieved using conventional devices. We also provide an explanation of the theoretical underpinnings of the design as well as the implications of these findings with regard to future developments.

  17. Active vibration control of nonlinear benchmark buildings

    Institute of Scientific and Technical Information of China (English)

    ZHOU Xing-de; CHEN Dao-zheng

    2007-01-01

    The present nonlinear model reduction methods unfit the nonlinear benchmark buildings as their vibration equations belong to a non-affine system. Meanwhile,the controllers designed directly by the nonlinear control strategy have a high order, and they are difficult to be applied actually. Therefore, a new active vibration control way which fits the nonlinear buildings is proposed. The idea of the proposed way is based on the model identification and structural model linearization, and exerting the control force to the built model according to the force action principle. This proposed way has a better practicability as the built model can be reduced by the balance reduction method based on the empirical Grammian matrix. A three-story benchmark structure is presented and the simulation results illustrate that the proposed method is viable for the civil engineering structures.

  18. Thermally Induced Nonlinear Optical Absorption in Metamaterial Perfect Absorbers

    CERN Document Server

    Guddala, Sriram; Ramakrishna, S Anantha

    2015-01-01

    A metamaterial perfect absorber consisting of a tri-layer (Al/ZnS/Al) metal-dielectric-metal system with top aluminium nano-disks is fabricated by laser-interference lithography and lift-off processing. The metamaterial absorber had peak resonant absorbance at 1090 nm and showed nonlinear absorption for 600ps laser pulses at 1064 nm wavelength. A nonlinear saturation of reflectance was measured to be dependent on the average laser power incident and not the peak laser intensity. The nonlinear behaviour is shown to arise from the heating due to the absorbed radiation and photo-thermal changes in the dielectric properties of aluminium. The metamaterial absorber is seen to be damage resistant at large laser intensities of 25 MW/cm2.

  19. Longitudinal metastructure bar with an active vibration absorber (Conference Presentation)

    Science.gov (United States)

    Reichl, Katherine; Inman, Daniel J.

    2017-04-01

    This work addresses two issues in lightweight structural composites suitable for aerospace systems. The first is to add additional functionality to multifunctional composites and the second is to provide damping in structures that cover a wide range of frequencies and temperatures. Passive damping in all materials suffer from failing at certain temperature and in certain frequency ranges. The extreme environments often seen by aerospace structures provide high temperature, which is exactly where damping levels in structures reduce causing unacceptable vibrations. In addition, as loading frequencies decrease damping levels fall off, and many loads experienced by aerospace structures are low frequency. This work looks at the implementation of a control system to a longitudinal metastructure bar. A metastructure is a structure which has distributed vibration absorbers which provide passive damping to the system. The active control system will be implemented by adding piezoelectric materials to one of the absorbers to make the absorber active. The structure with the active vibration absorber will be compared to a structure of equal weight with no active components. Since the two comparison structures are of equal weight, the performance improvements are strictly due to the control system and not at the cost of additional weight.

  20. Vibration Suppression of an Axially Moving String with Transverse Wind Loadings by a Nonlinear Energy Sink

    Directory of Open Access Journals (Sweden)

    Ye-Wei Zhang

    2013-01-01

    Full Text Available Nonlinear targeted energy transfer (TET is applied to suppress the excessive vibration of an axially moving string with transverse wind loads. The coupling dynamic equations used are modeled by a nonlinear energy sink (NES attached to the string to absorb vibrational energy. By a two-term Galerkin procedure, the equations are discretized, and the effects of vibration suppression by numerical methods are demonstrated. Results show that the NES can effectively suppress the vibration of the axially moving string with transverse wind loadings, thereby protecting the string from excessive movement.

  1. Application of Tuned Vibration Absorbers in Fluid Mounts

    Directory of Open Access Journals (Sweden)

    Mohammad Jalali Mashayekhi

    2009-01-01

    Full Text Available The need to reduce the fuel consumption of vehicles leads to having lighter chassis’ with lighter engines yet maintaining engine power. These new design requirements are in contrast with the vibration isolation requirements. To keep the vehicles light yet provide good cabin noise and vibration isolation, requires a new vibration isolation technology. Fluid mounts have been used in the aerospace and the automotive industry to provide cabin noise and vibration reduction for years. With the use of passive fluid mounts, the highest cabin noise and vibration reduction is achieved at a frequency called “Notch Frequency”. But typical passive fluid mounts have only one notch frequency. So the best cabin noise and vibration reduction is only achievable at one frequency. In this paper, a new fluid mount design in combination with a tuned vibration absorber is proposed. Bond graph modelling technique is used to model the new fluid mount design. The physical model and simulation results are presented. The effect of the natural frequency of the TVA on the dynamic stiffness of the fluid mount is studied.

  2. Suppression of mechanical vibrations in a building-like structure using a passive/active autoparametric absorber

    Science.gov (United States)

    Abundis-Fong, H. F.; Silva-Navarro, G.

    2014-03-01

    An experimental investigation is carried out on a system consisting of a primary structure coupled with a passive/active autoparametric vibration absorber. The primary structure consists of a building-like mechanical structure, it has three rigid floors connected by flexible columns made from aluminium strips, while the absorber consists of a cantilever beam with a PZT patch actuator actively controlled through an acquisition card. The whole system, which is a coupled non-linear oscillator, is subjected to sinusoidal excitation obtained from an electromechanical shaker in the neighborhood of internal resonances. The natural frequency of the absorber is tuned to be one-half of any of the natural frequencies of the main system. With the addition of a PZT actuator, the autoparametric vibration absorber is made active, thus enabling the possibility to control the effective stiffness associated to the passive absorber and, as a consequence, the implementation of an active vibration control scheme able to preserve, as possible, the autoparametric interaction as well as to compensate varying excitation frequencies. This active vibration absorber employs feedback information from an accelerometer on the primary structure, an accelerometer on the tip of the beam absorber and a strain gage on the base of the beam, feedforward information from the excitation force and on-line computations from the nonlinear approximate frequency response, parameterized in terms of a proportional gain provided by a voltage input to the PZT actuator, thus providing a mechanism to asymptotically track an optimal, robust and stable attenuation solution on the primary system.

  3. Laser beam propagation in non-linearly absorbing media

    CSIR Research Space (South Africa)

    Forbes, A

    2006-08-01

    Full Text Available Many analytical techniques exist to explore the propagation of certain laser beams in free space, or in a linearly absorbing medium. When the medium is nonlinearly absorbing the propagation must be described by an iterative process using the well...

  4. A Method for Reducing Noise Radiated from Structures with Vibration Absorbers by Using an Accelerated Neural Network

    Institute of Scientific and Technical Information of China (English)

    李连进; 葛为民

    2004-01-01

    A method for reducing noise radiated from structures by vibration absorbers is presented. Since usual design method for the absorbers is invalid for noise reduction, the peaks of noise power in the frequency domain as cost functions are applied. Hence, the equations for obtaining optimal parameters of the absorbers become nonlinear expressions. To have the parameters, an accelerated neural network procedure has been presented. Numerical calculations have been carried out for a plate-type cantilever beam with a large width, and experimental tests have been also performed for the same beam. It is clarified that the present method is valid for reducing noise radiated from structures. As for the usual design method for the absorbers, model analysis has been given, so the number of absorbers should be the same as that of the considered modes. While the nonlinear problem can be dealt with by the present method, there is no restriction on the number of absorbers or the model number.

  5. Stiffness control of magnetorheological gels for adaptive tunable vibration absorber

    Science.gov (United States)

    Kim, Hyun Kee; Kim, Hye Shin; Kim, Young-Keun

    2017-01-01

    In this study, a stiffness feedback control system for magnetorheological (MR) gel—a smart material of variable stiffness—is proposed, toward the design of a tunable vibration absorber that can adaptively tune to a time varying disturbance in real time. A PID controller was designed to track the required stiffness of the MR gel by controlling the magnitude of the target external magnetic field pervading the MR gel. This paper proposes a novel magnetic field generator that could produce a variable magnetic field with low energy consumption. The performance of the MR gel stiffness control was validated through experiments that showed the MR gel absorber system could be automatically tuned from 56 Hz to 67 Hz under a field of 100 mT to minimize the vibration of the primary system.

  6. Online identification of active absorbers in automotive vibration control

    Energy Technology Data Exchange (ETDEWEB)

    Buttelmann, M.; Lohmann, B.; Vinogradski, M.; Nedeljkovic, N. [Bremen Univ. (Germany). Inst. fuer Automatisierungstechnik; Marienfeld, P. [ContiTech Vibration Control GmbH, Hannover (Germany); Svaricek, F. [Continental Gummi-Werke AG, Hannover (Germany)

    2001-07-01

    In the past, engine-related noise and vibration in the vehicle cabin was exclusively reduced by passive absorption. Today, modern actuators and control systems make an active noise reduction possible by introducing counteracting vibration at 180 degrees phase lag. Within a cooperation of the Institute of Automation Systems and Continental AG, an approach using active absorbers at the engine mounts is investigated. As the dynamic behaviour of the active absorbers and other elements in the secondary path are time-variant (depending on temperature, age and other factors), an online identification is carried out. By this, the implemented feedforward control strategy is supported on a precise and frequently updated model of the secondary path. The chosen approaches to online and offline identification are presented together with first results achieved in online identification and with the overall control system. (orig.)

  7. Nonlinear frequency response analysis of structural vibrations

    Science.gov (United States)

    Weeger, Oliver; Wever, Utz; Simeon, Bernd

    2014-12-01

    In this paper we present a method for nonlinear frequency response analysis of mechanical vibrations of 3-dimensional solid structures. For computing nonlinear frequency response to periodic excitations, we employ the well-established harmonic balance method. A fundamental aspect for allowing a large-scale application of the method is model order reduction of the discretized equation of motion. Therefore we propose the utilization of a modal projection method enhanced with modal derivatives, providing second-order information. For an efficient spatial discretization of continuum mechanics nonlinear partial differential equations, including large deformations and hyperelastic material laws, we employ the concept of isogeometric analysis. Isogeometric finite element methods have already been shown to possess advantages over classical finite element discretizations in terms of higher accuracy of numerical approximations in the fields of linear vibration and static large deformation analysis. With several computational examples, we demonstrate the applicability and accuracy of the modal derivative reduction method for nonlinear static computations and vibration analysis. Thus, the presented method opens a promising perspective on application of nonlinear frequency analysis to large-scale industrial problems.

  8. Vibration Mitigation in Partially Liquid-Filled Vessel using Passive Energy Absorbers

    CERN Document Server

    Farid, Maor; Gendelman, O V

    2016-01-01

    This paper treats possible solutions for vibration mitigation in reduced-order model of partially-filled liquid tank under impulsive forcing. Such excitation may lead to hydraulic impacts applied on the tank inner walls. Finite stiffness of the tank walls is taken into account. We explore both linear (Tuned Mass Damper) and nonlinear (Nonlinear Energy Sink) passive vibration absorbers; mitigation performances are examined numerically. The liquid sloshing mass is modeled by equivalent massspring-dashpot system, which can both perform small-amplitude linear oscillations and impact the vessel walls. We use parameters of the equivalent mass-spring-dashpot system for well-explored case of cylindrical tanks. The hydraulic impacts are modeled by high-power potential and dissipation functions. Critical location in the tank structure is determined and expression of the corresponding local mechanical stress is derived. We use finite-elemet approach to assess the natural frequencies for specific system parameters and to...

  9. Analysis of Free Pendulum Vibration Absorber Using Flexible Multi-Body Dynamics

    Directory of Open Access Journals (Sweden)

    Emrah Gumus

    2016-01-01

    Full Text Available Structures which are commonly used in our infrastructures are becoming lighter with progress in material science. These structures due to their light weight and low stiffness have shown potential problem of wind-induced vibrations, a direct outcome of which is fatigue failure. In particular, if the structure is long and flexible, failure by fatigue will be inevitable if not designed properly. The main objective of this paper is to perform theoretical analysis for a novel free pendulum device as a passive vibration absorber. In this paper, the beam-tip mass-free pendulum structure is treated as a flexible multibody dynamic system and the ANCF formulation is used to demonstrate the coupled nonlinear dynamics of a large deflection of a beam with an appendage consisting of a mass-ball system. It is also aimed at showing the complete energy transfer between two modes occurring when the beam frequency is twice the ball frequency, which is known as autoparametric vibration absorption. Results are discussed and compared with findings of MSC ADAMS. This novel free pendulum device is practical and feasible passive vibration absorber in the mitigation of large amplitude wind-induced vibrations in traffic signal structures.

  10. Dynamical Behavior of a Pseudoelastic Vibration Absorber Using Shape Memory Alloys

    Directory of Open Access Journals (Sweden)

    Hugo De S. Oliveira

    2017-01-01

    Full Text Available The tuned vibration absorber (TVA provides vibration reduction of a primary system subjected to external excitation. The idea is to increase the number of system degrees of freedom connecting a secondary system to the primary system. This procedure promotes vibration reduction at its design forcing frequency but two new resonance peaks appear introducing critical behaviors that must be avoided. The use of shape memory alloys (SMAs can improve the performance of the classical TVA establishing an adaptive TVA (ATVA. This paper deals with the nonlinear dynamics of a passive pseudoelastic tuned vibration absorber with an SMA element. In this regard, a single degree of freedom elastic oscillator is used to represent the primary system, while an extra oscillator with an SMA element represents the secondary system. Temperature dependent behavior of the system allows one to change the system response avoiding undesirable responses. Nevertheless, hysteretic behavior introduces complex characteristics to the system dynamics. The influence of the hysteretic behavior due to stress-induced phase transformation is investigated. The ATVA performance is evaluated by analyzing primary system maximum vibration amplitudes for different forcing amplitudes and frequencies. Numerical simulations establish comparisons of the ATVA results with those obtained from the classical TVA. A parametric study is developed showing the best performance conditions and this information can be useful for design purposes.

  11. Nonlinear vibrating system identification via Hilbert decomposition

    Science.gov (United States)

    Feldman, Michael; Braun, Simon

    2017-02-01

    This paper deals with the identification of nonlinear vibration systems, based on measured signals for free and forced vibration regimes. Two categories of time domain signal are analyzed, one of a fast inter-modulation signal and a second as composed of several mono-components. To some extent, this attempts to imitate analytic studies of such systems, with its two major analysis groups - the perturbation and the harmonic balance methods. Two appropriate signal processing methods are then investigated, one based on demodulation and the other on signal decomposition. The Hilbert Transform (HT) has been shown to enable effective and simple methods of analysis. We show that precise identification of the nonlinear parameters can be obtained, contrary to other average HT based methods where only approximation parameters are obtained. The effectiveness of the proposed methods is demonstrated for the precise nonlinear system identification, using both the signal demodulation and the signal decomposition methods. Following the exposition of the tools used, both the signal demodulation as well as decomposition are applied to classical examples of nonlinear systems. Cases of nonlinear stiffness and damping forces are analyzed. These include, among other, an asymmetric Helmholtz oscillator, a backlash with nonlinear turbulent square friction, and a Duffing oscillator with dry friction.

  12. A hybrid nonlinear vibration energy harvester

    Science.gov (United States)

    Yang, Wei; Towfighian, Shahrzad

    2017-06-01

    Vibration energy harvesting converts mechanical energy from ambient sources to electricity to power remote sensors. Compared to linear resonators that have poor performance away from their natural frequency, nonlinear vibration energy harvesters perform better because they use vibration energy over a broader spectrum. We present a hybrid nonlinear energy harvester that combines bi-stability with internal resonance to increase the frequency bandwidth. A two-fold increase in the frequency bandwidth can be obtained compared to a bi-stable system with fixed magnets. The harvester consists of a piezoelectric cantilever beam carrying a movable magnet facing a fixed magnet. A spring allows the magnet to move along the beam and it provides an extra stored energy to further increase the amplitude of vibration acting as a mechanical amplifier. An electromechanically coupled mathematical model of the system is presented to obtain the dynamic response of the cantilever beam, the movable magnet and the output voltage. The perturbation method of multiple scales is applied to solve these equations and obtain approximate analytical solutions. The effects of various system parameters on the frequency responses are investigated. The numerical approaches of the long time integration (Runge-Kutta method) and the shooting technique are used to verify the analytical results. The results of this study can be used to improve efficiency in converting wasted mechanical vibration to useful electrical energy by broadening the frequency bandwidth.

  13. Evaluation of the Autoparametric Pendulum Vibration Absorber for a Duffing System

    Directory of Open Access Journals (Sweden)

    Benjamın Vazquez-Gonzalez

    2008-01-01

    Full Text Available In this work we study the frequency and dynamic response of a damped Duffing system attached to a parametrically excited pendulum vibration absorber. The multiple scales method is applied to get the autoparametric resonance conditions and the results are compared with a similar application of a pendulum absorber for a linear primary system. The approximate frequency analysis reveals that the nonlinear dynamics of the externally excited system are suppressed by the pendulum absorber and, under this condition, the primary Duffing system yields a time response almost equivalent to that obtained for a linear primary system, although the absorber frequency response is drastically modified and affected by the cubic stiffness, thus modifying the jumps defined by the fixed points. In the absorber frequency response can be appreciated a good absorption capability for certain ranges of nonlinear stiffness and the internal coupling is maintained by the existing damping between the pendulum and the primary system. Moreover, the stability of the coupled system is also affected by some extra fixed points introduced by the cubic stiffness, which is illustrated with several amplitude-force responses. Some numerical simulations of the approximate frequency responses and dynamic behavior are performed to show the steady-state and transient responses.

  14. Nonlinear characteristics of an autoparametric vibration system

    Science.gov (United States)

    Yan, Zhimiao; Taha, Haithem E.; Tan, Ting

    2017-03-01

    The nonlinear characteristics of an autoparametric vibration system are investigated. This system consists of a base structure and a cantilever beam with a tip mass. The dynamic equations for the system are derived using the extended Hamilton's principle. The method of multiple scales (MMS) is used to determine an approximate analytical solution of the nonlinear governing equations and, hence, analyze the stability and bifurcation of the system. Compared with the numerical simulation, the first-order MMS is not sufficient. A Lagrangian-based approach is proposed to perform a second-order analysis, which is applicable to a large class of nonlinear systems. The effects of the amplitude and frequency of the external force, damping and frequency of the attached cantilever beam, and the tip mass on the nonlinear responses of the autoparametric vibration system are determined. The results show that this system exhibits many interesting nonlinear phenomena including saturation, jumps, hysteresis and different kinds of bifurcations, such as saddle-node, supercritical pitchfork and subcritical pitchfork bifurcations. Power spectra, phase portraits and Poincare maps are employed to analyze the unstable behavior and the associated Hopf bifurcation and chaos. Depending on the application of such a system, its dynamical behaviors could be exploited or avoided.

  15. Incorporating piezoelectric energy harvester in tunable vibration absorber for application in multi-modal vibration reduction of a platform structure

    Science.gov (United States)

    Lee, Chun-Ying; Lin, Jia-Hong

    2017-02-01

    Tunable vibration absorber is an effective device to reduce the vibration of structure subjected to harmonic excitation. The vibration energy is transferred mostly to the absorber when the natural frequency of the absorber is tuned to the excitation frequency. In this study, a piezoelectric (PZT) transducer was incorporated into the absorber in order to harvest the vibration energy and still alleviate the vibration of a platform structure. The tuning in dynamic characteristics of the absorber was facilitated by controlling its tip mass. The design formulation of the absorber was presented with a single degree-of-freedom (SDOF) model having the equivalent parameters. In the meantime, an optimal electric load resistor was determined to maximize the power output from the PZT transducer. The experimental measurement validated the SDOF model with good accuracy both in the vibration response and the output electric voltage. Finally, the absorber was installed on a platform structure to investigate its vibration reduction and energy harvesting capability for the external disturbance frequency covering certain frequency span. With three resonance modes of the platform studied, the absorber was able to reduce more than 80% of its original vibration and harvest several folds of electric power comparing with the untuned absorber. Although the performance in vibration reduction was slightly influenced (sensor or actuator applications.

  16. A method for regulating strong nonlinear vibration energy of the flexible arm

    Directory of Open Access Journals (Sweden)

    Yushu Bian

    2015-07-01

    Full Text Available For an oscillating system, large amplitude indicates strong vibration energy. In this article, modal interaction is used as a useful means to regulate strong nonlinear vibration energy of the flexible arm undergoing rigid motion. A method is put forward to migrate and dissipate vibration energy based on modal interaction. By means of multiple-scale perturbation analysis, it is proven that internal resonance can be successfully established between modes of the flexible arm and the vibration absorber. Through examples and analyses, it is verified that this control method is effective in regulating strong vibration energy and can be used to suppress strong nonlinear vibration of the flexible arm undergoing rigid motion.

  17. Vibrational mechanics nonlinear dynamic effects, general approach, applications

    CERN Document Server

    Blekhman, Iliya I

    2000-01-01

    This important book deals with vibrational mechanics - the new, intensively developing section of nonlinear dynamics and the theory of nonlinear oscillations. It offers a general approach to the study of the effect of vibration on nonlinear mechanical systems.The book presents the mathematical apparatus of vibrational mechanics which is used to describe such nonlinear effects as the disappearance and appearance under vibration of stable positions of equilibrium and motions (i.e. attractors), the change of the rheological properties of the media, self-synchronization, self-balancing, the vibrat

  18. Transient vibration analytical modeling and suppressing for vibration absorber system under impulse excitation

    Science.gov (United States)

    Wang, Xi; Yang, Bintang; Yu, Hu; Gao, Yulong

    2017-04-01

    The impulse excitation of mechanism causes transient vibration. In order to achieve adaptive transient vibration control, a method which can exactly model the response need to be proposed. This paper presents an analytical model to obtain the response of the primary system attached with dynamic vibration absorber (DVA) under impulse excitation. The impulse excitation which can be divided into single-impulse excitation and multi-impulse excitation is simplified as sinusoidal wave to establish the analytical model. To decouple the differential governing equations, a transform matrix is applied to convert the response from the physical coordinate to model coordinate. Therefore, the analytical response in the physical coordinate can be obtained by inverse transformation. The numerical Runge-Kutta method and experimental tests have demonstrated the effectiveness of the analytical model proposed. The wavelet of the response indicates that the transient vibration consists of components with multiple frequencies, and it shows that the modeling results coincide with the experiments. The optimizing simulations based on genetic algorithm and experimental tests demonstrate that the transient vibration of the primary system can be decreased by changing the stiffness of the DVA. The results presented in this paper are the foundations for us to develop the adaptive transient vibration absorber in the future.

  19. Analytically optimal parameters of dynamic vibration absorber with negative stiffness

    Science.gov (United States)

    Shen, Yongjun; Peng, Haibo; Li, Xianghong; Yang, Shaopu

    2017-02-01

    In this paper the optimal parameters of a dynamic vibration absorber (DVA) with negative stiffness is analytically studied. The analytical solution is obtained by Laplace transform method when the primary system is subjected to harmonic excitation. The research shows there are still two fixed points independent of the absorber damping in the amplitude-frequency curve of the primary system when the system contains negative stiffness. Then the optimum frequency ratio and optimum damping ratio are respectively obtained based on the fixed-point theory. A new strategy is proposed to obtain the optimum negative stiffness ratio and make the system remain stable at the same time. At last the control performance of the presented DVA is compared with those of three existing typical DVAs, which were presented by Den Hartog, Ren and Sims respectively. The comparison results in harmonic and random excitation show that the presented DVA in this paper could not only reduce the peak value of the amplitude-frequency curve of the primary system significantly, but also broaden the efficient frequency range of vibration mitigation.

  20. Development of a Semi-Active Electromagnetic Vibration Absorber and Its Experimental Study.

    Science.gov (United States)

    Liu, Xueguang; Feng, Xiaoxiao; Shi, Ye; Wang, Ye; Shuai, Zhijun

    2013-10-01

    In this work, a semiactive electromagnetic vibration absorber has been developed based on a proposed electromagnetic stiffness adjustable spring model, which presents a new solution for adjusting stiffness in the field of vibration absorber devices. Simulation study on the electromagnetic spring has been performed to determine the structural parameter of the semiactive vibration absorber. An experimental rig is also built up to investigate its practical vibration control effectiveness. Firstly, the finite element model of the test bench is used to analyze its vibration characteristics. Then, the vibration reduction effect is predicted through the simulation analysis, from which the optimal control positions are found. Finally, the experimental studies are also conducted, and the results show that this semiactive electromagnetic vibration absorber has a frequency adjustment range from 21 Hz to 25 Hz, in which considerable vibration reduction from 5 dB to 10 dB can be achieved.

  1. Improving Robustness of Tuned Vibration Absorbers Using Shape Memory Alloys

    Directory of Open Access Journals (Sweden)

    Mohammad H. Elahinia

    2005-01-01

    Full Text Available A conventional passive tuned vibration absorber (TVA is effective when it is precisely tuned to the frequency of a vibration mode; otherwise, it may amplify the vibrations of the primary system. In many applications, the frequency often changes over time. For example, adding or subtracting external mass on the existing primary system results in changes in the system’s natural frequency. The frequency changes of the primary system can significantly degrade the performance of TVA. To cope with this problem, many alternative TVAs (such as semiactive, adaptive, and active TVAs have been studied. As another alternative, this paper investigates the use of Shape Memory Alloys (SMAs in passive TVAs in order to improve the robustness of the TVAs subject to mass change in the primary system. The proposed SMA-TVA employs SMA wires, which exhibit variable stiffness, as the spring element of the TVA. This allows us to tune effective stiffness of the TVA to adapt to the changes in the primary system's natural frequency. The simulation model, presented in this paper, contains the dynamics of the TVA along with the SMA wire model that includes phase transformation, heat transfer, and the constitutive relations. Additionally, a PID controller is included for regulating the applied voltage to the SMA wires in order to maintain the desired stiffness. The robustness analysis is then performed on both the SMA-TVA and the equivalent passive TVA. For our robustness analysis, the mass of the primary system is varied by ± 30% of its nominal mass. The simulation results show that the SMA-TVA is more robust than the equivalent passive TVA in reducing peak vibrations in the primary system subject to change of its mass.

  2. Note: Vibration suppression using tunable vibration absorber based on stiffness variable magneto-rheological gel

    Science.gov (United States)

    Shin, Beom-Cheol; Yoon, Jung-Hwan; Kim, Young-Keun; Kim, Kyung-Soo

    2015-10-01

    This paper proposes a novel adaptive tunable vibration absorber (TVA) based on a smart material the magnetorheological gel (MRG) to achieve a wide range of tonal vibration suppression on the primary system to protect any connected sensitive device. The vibration suppression performance of the MRG TVA was analyzed by conducting a modal test of the primary system under different magnetic fields. The experiment verified that the proposed MRG TVA can be controlled to produce 379% of stiffness change or 115% of tuning frequency under just 200 mT magnetic field. The proposed MRG TVA was found to possess a wider tuning frequency range than the TVA based on other smart material such as magnetorheological elastomer.

  3. A smart dynamic vibration absorber for suppressing the vibration of a string supported by flexible beams

    Science.gov (United States)

    Nambu, Yohsuke; Yamamoto, Shota; Chiba, Masakatsu

    2014-02-01

    This study aims to effectively and robustly suppress the vibration of tension-stabilized structures (TSSs) using a smart dynamic vibration absorber (DVA). In recent years, a strong need has emerged for high-precision and high-functionality space structural systems for realizing advanced space missions. TSSs have attracted attention in this regard as large yet lightweight structural systems with high storage efficiency. A fundamental issue in the application of TSSs is vibration control of strings, of which TSSs are predominantly composed. In particular, the suppression of microvibrations is difficult because the deformation is almost perpendicular to the direction of vibration. A DVA is an effective device for suppressing microvibrations. However, the damping performance is sensitive to changes in dynamic properties. Furthermore, aging degradation and temperature dependence negatively affect DVA performance. This study aimed to develop a smart, active DVA with self-sensing actuation to improve robustness. A small cantilever with a piezoelectric transducer was utilized as a smart DVA. Numerical simulations and experiments showed that a passive DVA and the smart DVA suppressed vibrations but that the smart DVA showed improved effectiveness and robustness.

  4. Uniform Stability of Damped Nonlinear Vibrations of an Elastic String

    Indian Academy of Sciences (India)

    Ganesh C Gorain; Sujit K Bose

    2003-11-01

    Here we are concerned about uniform stability of damped nonlinear transverse vibrations of an elastic string fixed at its two ends. The vibrations governed by nonlinear integro-differential equation of Kirchoff type, is shown to possess energy uniformly bounded by exponentially decaying function of time. The result is achieved by considering an energy-like Lyapunov functional for the system.

  5. MR Damper Controlled Vibration Absorber for Enhanced Mitigation of Harmonic Vibrations

    Directory of Open Access Journals (Sweden)

    Felix Weber

    2016-12-01

    Full Text Available This paper describes a semi-active vibration absorber (SVA concept based on a real-time controlled magnetorheological damper (MR-SVA for the enhanced mitigation of structural vibrations due to harmonic disturbing forces. The force of the MR damper is controlled in real-time to generate the frequency and damping controls according to the behaviour of the undamped vibration absorber for the actual frequency of vibration. As stiffness and damping emulations in semi-active actuators are coupled quantities the control is formulated to prioritize the frequency control by the controlled stiffness. The control algorithm is augmented by a stiffness correction method ensuring precise frequency control when the desired control force is constrained by the semi-active restriction and residual force of the MR damper. The force tracking task is solved by a model-based feed forward with feedback correction. The MR-SVA is numerically and experimentally validated for the primary structure with nominal eigenfrequency and when de-tuning of −10%, −5%, +5% and +10% is present. Both validations demonstrate that the MR-SVA improves the vibration reduction in the primary structure by up to 55% compared to the passive tuned mass damper (TMD. Furthermore, it is shown that the MR-SVA with only 80% of tuned mass leads to approximately the same enhanced performance while the associated increased relative motion amplitude of the tuned mass is more than compensated be the reduced dimensions of the mass. Therefore, the MR-SVA is an appropriate solution for the mitigation of tall buildings where the pendulum mass can be up to several thousands of metric tonnes and space for the pendulum damper is limited.

  6. H∞ optimization of dynamic vibration absorber variant for vibration control of damped linear systems

    Science.gov (United States)

    Chun, Semin; Lee, Youngil; Kim, Tae-Hyoung

    2015-01-01

    This study focuses on the H∞ optimal design of a dynamic vibration absorber (DVA) variant for suppressing high-amplitude vibrations of damped primary systems. Unlike traditional DVA configurations, the damping element in this type of DVA is connected directly to the ground instead of the primary mass. First, a thorough graphical analysis of the variations in the maximum amplitude magnification factor depending on two design parameters, natural frequency and absorber damping ratios, is performed. The results of this analysis clearly show that any fixed-points-theory-based conventional method could provide, at best, only locally but not globally optimal parameters. Second, for directly handling the H∞ optimization for its optimal design, a novel meta-heuristic search engine, called the diversity-guided cyclic-network-topology-based constrained particle swarm optimization (Div-CNT-CPSO), is developed. The variant DVA system developed using the proposed Div-CNT-CPSO scheme is compared with those reported in the literature. The results of this comparison verified that the proposed system is better than the existing methods for suppressing the steady-state vibration amplitude of a controlled primary system.

  7. Analytical Evaluation of the Nonlinear Vibration of Coupled Oscillator Systems

    DEFF Research Database (Denmark)

    Bayat, M.; Shahidi, M.; Barari, Amin

    2011-01-01

    We consider periodic solutions for nonlinear free vibration of conservative, coupled mass-spring systems with linear and nonlinear stiffnesses. Two practical cases of these systems are explained and introduced. An analytical technique called energy balance method (EBM) was applied to calculate ap...... accuracy which is valid for a wide range of vibration amplitudes as indicated in the presented examples.......We consider periodic solutions for nonlinear free vibration of conservative, coupled mass-spring systems with linear and nonlinear stiffnesses. Two practical cases of these systems are explained and introduced. An analytical technique called energy balance method (EBM) was applied to calculate...

  8. Identification of the nonlinear vibration system of power transformers

    Science.gov (United States)

    Jing, Zheng; Hai, Huang; Pan, Jie; Yanni, Zhang

    2017-01-01

    This paper focuses on the identification of the nonlinear vibration system of power transformers. A Hammerstein model is used to identify the system with electrical inputs and the vibration of the transformer tank as the output. The nonlinear property of the system is modelled using a Fourier neural network consisting of a nonlinear element and a linear dynamic block. The order and weights of the network are determined based on the Lipschitz criterion and the back-propagation algorithm. This system identification method is tested on several power transformers. Promising results for predicting the transformer vibration and extracting system parameters are presented and discussed.

  9. The characteristic of power flow in broad band dynamic vibration absorber

    Institute of Scientific and Technical Information of China (English)

    WANG Minqing; SHENG Meiping; SUN Jincai; LIU Yi

    2002-01-01

    DVA (dynamic vibration absorber) is good for restrain of the resonance vibration in low frequency, especially under the condition that there are only one mode or two modes in a frequency band. It seems rather difficult to control the resonance vibration of elastic structures in high frequency, since usually there are so many modes in high frequency band. The broad band DVA is brought forward to reduce the resonance vibration of elastic structures. The broad band DVA is designed on the basis of the characteristic of power flow in structure in this paper.The broad band DVA is effective on absorbing the resonance vibration power flow of the mostimportant modes. The ability of absorbing vibration for the broad band DVA is analyzed indetail. The results obtained in this paper provide a basis for the optimization design of thebroad band DVA and the optimization positions on structures.

  10. Nonlinear vibration with control for flexible and adaptive structures

    CERN Document Server

    Wagg, David

    2015-01-01

    This book provides a comprehensive discussion of nonlinear multi-modal structural vibration problems, and shows how vibration suppression can be applied to such systems by considering a sample set of relevant control techniques. It covers the basic principles of nonlinear vibrations that occur in flexible and/or adaptive structures, with an emphasis on engineering analysis and relevant control techniques. Understanding nonlinear vibrations is becoming increasingly important in a range of engineering applications, particularly in the design of flexible structures such as aircraft, satellites, bridges, and sports stadia. There is an increasing trend towards lighter structures, with increased slenderness, often made of new composite materials and requiring some form of deployment and/or active vibration control. There are also applications in the areas of robotics, mechatronics, micro electrical mechanical systems, non-destructive testing and related disciplines such as structural health monitoring. Two broader ...

  11. Nonlinear vibrations and stability of aerostatic bearing

    Directory of Open Access Journals (Sweden)

    Kozánek J.

    2008-12-01

    Full Text Available Bearings based on aerostatic principle belong to the new machine elements advantageous for low- and high-speed applications, but their dynamic and stability properties are not yet sufficiently known. This paper presents a new elaborated method and gained results of theoretical investigation of dynamic properties of aerostatic bearing in general dimensionless form. It is aimed also as a supporting tool for diagnostic and identification methods used at developing of new bearings proposed by TECHLAB, Prague for industrial applications. Mathematical model expresses nonlinear and evolutive properties in the entire area of bearing clearance, contains sufficient number of free parameters in functions of restoring and damping forces and can therefore describe all types of motions occurring in gas bearings as periodic, quasi-periodic, including beats and instability, which can leads to chaotic and self-excited vibrations. The influence of non-diagonal elements of stiffness and damping matrices of linearized model on the spectral properties and the stability of system is investigated, too.

  12. Vibration reduction in beam bridge under moving loads using nonlinear smooth and discontinuous oscillator

    Directory of Open Access Journals (Sweden)

    Ruilan Tian

    2016-06-01

    Full Text Available The coupled system of smooth and discontinuous absorber and beam bridge under moving loads is constructed in order to detect the effectiveness of smooth and discontinuous absorber. It is worth pointing out that the coupled system contains an irrational restoring force which is a barrier for conventional nonlinear techniques. Hence, the harmonic balance method and Fourier expansion are used to obtain the approximate solutions of the system. The first and the second kind of generalized complete elliptic integrals are introduced. Furthermore, using power flow approach, the performance of smooth and discontinuous absorber in vibration reduction is estimated through the input energy, the dissipated energy, and the damping efficiency. It is interesting that only depending on the value of the smoothness parameter, the efficiency parameter of vibration reduction is optimized. Therefore, smooth and discontinuous absorber can adapt itself to effectively reducing the amplitude of the vibration of the beam bridge, which provides an insight to the understanding of the applications of smooth and discontinuous oscillator in engineering and power flow characteristics in nonlinear system.

  13. Nonlinear Vibrations of Timoshenko Beams with Various Boundary Conditions

    Institute of Scientific and Technical Information of China (English)

    郭强; 刘曦; 钟宏志

    2004-01-01

    This paper is concerned with the effects of boundary conditions on the large-amplitude free vibrations of Timoshenko beams. The effects of nonlinear terms on the frequency of Timoshenko beams with simply supported ends (supported-supported, SS), clamped ends (clamped-clamped, CC) and one end simply supported and the other end clamped (clamped-supported, CS) are discussed in detail. Given a specific vibration amplitude, the change of nonlinear frequency according to the effects of boundary conditions is always in the following descending order: SS, CS, and CC. It is found that the slenderness ratio has a significant influence on the nonlinear frequency. For slender beams, the nonlinear effects of bending curvature and shear strain are negligible regardless of the boundary conditions. For short beams and especially for those of large amplitude vibrations, however, the nonlinear effects of bending curvature and shear strain become noticeable in the following ascending order: SS, CS, and CC.

  14. NON-LINEAR FORCED VIBRATION OF AXIALLY MOVING VISCOELASTIC BEAMS

    Institute of Scientific and Technical Information of China (English)

    Yang Xiaodong; Chen Li-Qun

    2006-01-01

    The non-linear forced vibration of axially moving viscoelastic beams excited by the vibration of the supporting foundation is investigated. A non-linear partial-differential equation governing the transverse motion is derived from the dynamical, constitutive equations and geometrical relations. By referring to the quasi-static stretch assumption, the partial-differential non-linearity is reduced to an integro-partial-differential one. The method of multiple scales is directly applied to the governing equations with the two types of non-linearity, respectively. The amplitude of near- and exact-resonant steady state is analyzed by use of the solvability condition of eliminating secular terms. Numerical results are presented to show the contributions of foundation vibration amplitude, viscoelastic damping, and nonlinearity to the response amplitude for the first and the second mode.

  15. Liquid viscosity sensing using nonlinear vibration of a fiberoptic sensor.

    Science.gov (United States)

    Wang, Wei-Chih; Liu, Chao-Shih

    2013-07-01

    This paper investigates the nonlinear dynamic motion of a vibrating optical fiber viscosity sensor through representative cases of primary and super-harmonic resonance. The results show that a nonlinear effect drastically improves the sensitivity of the viscosity measurement by nearly an order of magnitude from the previously developed linear systems. Experimental results and several applications of the viscosity sensor are also presented.

  16. Lessons Learned on the Application of Vibration Absorbers for Enhanced Cannon Stabilization

    Directory of Open Access Journals (Sweden)

    Eric Kathe

    2001-01-01

    Full Text Available This paper will summarize the successful application of muzzle-end vibration absorbers to reduce cannon vibration. This technology constitutes a weapons stabilization approach that focuses on passive mechanical structural modification of the cannon, rather than relying upon an external control law to actively cancel vibrations. Challenges encountered during field testing, non-ideal behavior, and performance evaluation using digital signal processing will be highlighted.

  17. Free-vibration acoustic resonance of a nonlinear elastic bar

    Science.gov (United States)

    Tarumi, Ryuichi; Oshita, Yoshihito

    2011-02-01

    Free-vibration acoustic resonance of a one-dimensional nonlinear elastic bar was investigated by direct analysis in the calculus of variations. The Lagrangian density of the bar includes a cubic term of the deformation gradient, which is responsible for both geometric and constitutive nonlinearities. By expanding the deformation function into a complex Fourier series, we derived the action integral in an analytic form and evaluated its stationary conditions numerically with the Ritz method for the first three resonant vibration modes. This revealed that the bar shows the following prominent nonlinear features: (i) amplitude dependence of the resonance frequency; (ii) symmetry breaking in the vibration pattern; and (iii) excitation of the high-frequency mode around nodal-like points. Stability of the resonant vibrations was also addressed in terms of a convex condition on the strain energy density.

  18. Nonlinear vibration behaviors of casing pipe in the deep water

    Science.gov (United States)

    Tang, You-Gang; Zhang, Su-Xia; Yi, Cong

    2006-10-01

    The vortex-induced nonlinear vibration of casing pipes in the deep water was investigated considering the loads of current and combined wave-current. The vortex-induced vibration equation of a casing pipe was set up with considering the beam mode and Morison's nonlinear fluid loads as well as the vortex-excited loads. The approach of calculating vortex-excited nonlinear vibration by Galerkin's method was proposed. The natural vibration frequencies and modes were obtained, and the response including primary resonance induced by current and the composite resonance under combined wave-current for the 170 m long casing pipe in the 160 m depth of water were investigated. The results show that the dynamics response of casing pipe obviously increases, and the complicated response behaviors of casing pipe are described under combined wave-current.

  19. Vibration Analysis of Timoshenko Beams on a Nonlinear Elastic Foundation

    Institute of Scientific and Technical Information of China (English)

    MO Yihua; OU Li; ZHONG Hongzhi

    2009-01-01

    The vibrations of beams on a nonlinear elastic foundation were analyzed considering the effects of transverse shear deformation and the rotational inertia of beams. A weak form quadrature element method (QEM) is used for the vibration analysis. The fundamental frequencies of beams are presented for various slenderness ratios and nonlinear foundation parameters for both slender and short beams. The results for slender beams compare well with finite element results. The analysis shows that the transverse shear de-formation and the nonlinear foundation parameter significantly affect the fundamental frequency of the beams.

  20. Active/passive distributed absorber for vibration and sound radiation control

    OpenAIRE

    2005-01-01

    The active/passive absorber for extended vibration and sound radiation control includes principally two layers. The first layer has a low stiffness per unit area which allows motion in the direction perpendicular to its main plane. The second layer is principally a mass layer. These two combined layers have a frequency of resonance close to one of the main structure. The dynamic behavior of the coupled system makes the active/passive absorber a passive absorber; however, the first layer can b...

  1. Background-Free Nonlinear Microspectroscopy with Vibrational Molecular Interferometry

    Science.gov (United States)

    Garbacik, Erik T.; Korterik, Jeroen P.; Otto, Cees; Mukamel, Shaul; Herek, Jennifer L.; Offerhaus, Herman L.

    2013-01-01

    We demonstrate a method for performing nonlinear microspectroscopy that provides an intuitive and unified description of the various signal contributions, and allows the direct extraction of the vibrational response. Three optical fields create a pair of Stokes Raman pathways that interfere in the same vibrational state. Frequency modulating one of the fields leads to amplitude modulations on all of the fields. This vibrational molecular interferometry technique allows imaging at high speed free of nonresonant background, and is able to distinguish between electronic and vibrational contributions to the total signal. PMID:22243075

  2. Nonlinear vibration of corrugated shallow shells under Uniform load

    Institute of Scientific and Technical Information of China (English)

    YUAN Hong; LIU Ren-huai

    2007-01-01

    Based on the large deflection dynamic equations of axisymmetric shallow shells of revolution,the nonlinear forced vibration of a corrugated shallow shell under uniform load is investigated.The nonlinear partial differential equations of shallow shell are reduced to the nonlinear integral-differential equations by the method of Green's function. To solve the integral-differential equations,expansion method is used to obtain Green's function.Then the integral-differential equations are reduced to the form with degenerate core by expanding Green's function as series of characteristic function.Therefore,the integral-differential equations become nonlinear ordinary differential equations with regard to time. The amplitude-frequency response under harmonic for is obtained by considering single mode vibration.As a numerical example,forced vibration phenomena of shallow spherical shells with sinusoidal corrugation are studied.The obtained solutions are available for reference to design of corrugated shells

  3. Parameter Identification of Weakly Nonlinear Vibration System in Frequency Domain

    Directory of Open Access Journals (Sweden)

    Jiehua Peng

    2004-01-01

    Full Text Available A new method of identifying parameters of nonlinearly vibrating system in frequency domain is presented in this paper. The problems of parameter identification of the nonlinear dynamic system with nonlinear elastic force or nonlinear damping force are discussed. In the method, the mathematic model of parameter identification is frequency response function. Firstly, by means of perturbation method the frequency response function of weakly nonlinear vibration system is derived. Next, a parameter transformation is made and the frequency response function becomes a linear function of the new parameters. Then, based on this function and with the least square method, physical parameters of the system are identified. Finally, the applicability of the proposed technique is confirmed by numerical simulation.

  4. Experimental study of targeted energy transfer from an acoustic system to a nonlinear membrane absorber

    Science.gov (United States)

    Bellet, R.; Cochelin, B.; Herzog, P.; Mattei, P.-O.

    2010-07-01

    This paper deals with the application of the concept of targeted energy transfer to the field of acoustics, providing a new approach to passive sound control in the low frequency domain, where no efficient dissipative mechanism exists. The targeted energy transfer, also called energy pumping, is a phenomenon that we observe by combining a pure nonlinear oscillator with a linear primary system. It corresponds to an almost irreversible transfer of vibration energy from the linear system to the auxiliary nonlinear one, where the energy is finally dissipated. In this study, an experimental set-up has been developed using the air inside a tube as the acoustic linear system, a thin circular visco-elastic membrane as an essentially cubic oscillator and the air inside a box as a weak coupling between those two elements. In this paper, which mainly deals with experimental results, it is shown that several regimes exist under sinusoidal forcing, corresponding to the different nonlinear normal modes of the system. One of these regimes is the quasi-periodic energy pumping regime. The targeted energy transfer phenomenon is also visible on the free oscillations of the system. Indeed, above an initial excitation threshold, the sound extinction in the tube follows a quasi-linear decrease that is much faster than the usual exponential one. During this linear decrease, the energy of the acoustic medium is irreversibly transferred to the membrane and then damped into this element called nonlinear energy sink. We present also the frequency responses of the system which shows a clipping of the original resonance peak of the acoustic medium and we finally demonstrate the ability of the nonlinear absorber to operate in a large frequency band, tuning itself to any linear system.

  5. Vibration measurement with nonlinear converter in the presence of noise

    Science.gov (United States)

    Mozuras, Almantas

    2017-10-01

    Conventional vibration measurement methods use the linear properties of physical converters. These methods are strongly influenced by nonlinear distortions, because ideal linear converters are not available. Practically, any converter can be considered as a linear one, when an output signal is very small. However, the influence of noise increases significantly and signal-to-noise ratio decreases at lower signals. When the output signal is increasing, the nonlinear distortions are also augmenting. If the wide spectrum vibration is measured, conventional methods face a harmonic distortion as well as intermodulation effects. Purpose of this research is to develop a measurement method of wide spectrum vibration by using a converter described by a nonlinear function of type f(x), where x =x(t) denotes the dependence of coordinate x on time t due to the vibration. Parameter x(t) describing the vibration is expressed as Fourier series. The spectral components of the converter output f(x(t)) are determined by using Fourier transform. The obtained system of nonlinear equations is solved using the least squares technique that permits to find x(t) in the presence of noise. This method allows one to carry out the absolute or relative vibration measurements. High resistance to noise is typical for the absolute vibration measurement, but it is necessary to know the Taylor expansion coefficients of the function f(x). If the Taylor expansion is not known, the relative measurement of vibration parameters is also possible, but with lower resistance to noise. This method allows one to eliminate the influence of nonlinear distortions to the measurement results, and consequently to eliminate harmonic distortion and intermodulation effects. The use of nonlinear properties of the converter for measurement gives some advantages related to an increased frequency range of the output signal (consequently increasing the number of equations) that allows one to decrease the noise influence on

  6. Nonlinear Vibration of Oscillation Systems using Frequency-Amplitude Formulation

    Directory of Open Access Journals (Sweden)

    A. Fereidoon

    2012-01-01

    Full Text Available In this paper we study the periodic solutions of free vibration of mechanical systems with third and fifth-order nonlinearity for two examples using He's Frequency-Amplitude Formulation (HFAF.The effectiveness and convenience of the method is illustrated in these examples. It will be shown that the solutions obtained with current method have a fabulous conformity with those achieved from time marching solution. HFAF is easy with powerful concepts and the high accuracy, so it can be found widely applicable in vibrations, especially strong nonlinearity oscillatory problems.

  7. Confinement of Vibrations in Variable-Geometry Nonlinear Flexible Beam

    Directory of Open Access Journals (Sweden)

    W. Gafsi

    2014-01-01

    Full Text Available In this paper, we propose a novel strategy for controlling a flexible nonlinear beam with the confinement of vibrations. We focus principally on design issues related to the passive control of the beam by proper selection of its geometrical and physical parameters. Due to large deflections within the regions where the vibrations are to be confined, we admit a nonlinear model that describes with precision the beam dynamics. In order to design a set of physical and geometrical parameters of the beam, we first formulate an inverse eigenvalue problem. To this end, we linearize the beam model and determine the linearly assumed modes that guarantee vibration confinement in selected spatial zones and satisfy the boundary conditions of the beam to be controlled. The approximation of the physical and geometrical parameters is based on the orthogonality of the assumed linear mode shapes. To validate the strategy, we input the resulting parameters into the nonlinear integral-partial differential equation that describes the beam dynamics. The nonlinear frequency response curves of the beam are approximated using the differential quadrature method and the finite difference method. We confirm that using the linear model, the strategy of vibration confinement remains valid for the nonlinear beam.

  8. Approximate Series Solutions for Nonlinear Free Vibration of Suspended Cables

    Directory of Open Access Journals (Sweden)

    Yaobing Zhao

    2014-01-01

    Full Text Available This paper presents approximate series solutions for nonlinear free vibration of suspended cables via the Lindstedt-Poincare method and homotopy analysis method, respectively. Firstly, taking into account the geometric nonlinearity of the suspended cable as well as the quasi-static assumption, a mathematical model is presented. Secondly, two analytical methods are introduced to obtain the approximate series solutions in the case of nonlinear free vibration. Moreover, small and large sag-to-span ratios and initial conditions are chosen to study the nonlinear dynamic responses by these two analytical methods. The numerical results indicate that frequency amplitude relationships obtained with different analytical approaches exhibit some quantitative and qualitative differences in the cases of motions, mode shapes, and particular sag-to-span ratios. Finally, a detailed comparison of the differences in the displacement fields and cable axial total tensions is made.

  9. Effects of rubber shock absorber on the flywheel micro vibration in the satellite imaging system

    Science.gov (United States)

    Deng, Changcheng; Mu, Deqiang; Jia, Xuezhi; Li, Zongxuan

    2016-12-01

    When a satellite is in orbit, its flywheel will generate micro vibration and affect the imaging quality of the camera. In order to reduce this effect, a rubber shock absorber is used, and a numerical model and an experimental setup are developed to investigate its effect on the micro vibration in the study. An integrated model is developed for the system, and a ray tracing method is used in the modeling. The spot coordinates and displacements of the image plane are obtained, and the modulate transfer function (MTF) of the system is calculated. A satellite including a rubber shock absorber is designed, and the experiments are carried out. Both simulation and experiments results show that the MTF increases almost 10 %, suggesting the rubber shock absorber is useful to decrease the flywheel vibration.

  10. Non-Linear Vibration of Euler-Bernoulli Beams

    DEFF Research Database (Denmark)

    Barari, Amin; Kaliji, H. D.; Domairry, G.

    2011-01-01

    In this paper, variational iteration (VIM) and parametrized perturbation (PPM)methods have been used to investigate non-linear vibration of Euler-Bernoulli beams subjected to the axial loads. The proposed methods do not require small parameter in the equation which is difficult to be found for no...... for nonlinear problems. Comparison of VIM and PPM with Runge-Kutta 4th leads to highly accurate solutions....

  11. NONLINEARLY VIBRATIONAL ENERGY-SPECTRA OF MOLECULAR CRYSTALS

    Institute of Scientific and Technical Information of China (English)

    PANG XIAO-FENG; CHEN XIANG-RONG

    2000-01-01

    The nonlinear quantum vibrational energy spectra of amide-I in the molecular crystals acetanilide are calculatedby using the discrete nonlinear Schrodinger equation appropriate to this kind of crystals. The numerical results obtainedby this method are in good agreement with the experimental values. Meanwhile, the energy levels at high excited stateshave also been obtained for the acetanilide, which is helpful in researching the Raman scattering and infrared absorptionproperties of the this kind of crystals.

  12. Vibration control of multi-degrees-of-freedom system with dynamic absorbers based on power flow

    Institute of Scientific and Technical Information of China (English)

    WANG Quanjuan; HUANG Wenhua; XIA Songbo; LI Jimin; SUN Zhizhuo

    2003-01-01

    In accordance with a multiple degrees of freedom vibration system with dynamicvibration absorbers (DVAs), an equivalent admittance matrix and the power flows input majorstructure and minor structure are deduced on the basis of the theories of structure mobility.Furthermore, regarding the net power flow of main vibration system as the controlled object,probed into are the single and multiple model controls of multi-degrees-of-freedom system withone or several absorbers attached. And the control mechanism and effect of dynamic vibrationabsorbers are revealed.

  13. An adaptive piezoelectric vibration absorber enhanced by a negative capacitance applied to a shell structure

    Science.gov (United States)

    Gripp, J. A. B.; Góes, L. C. S.; Heuss, O.; Scinocca, F.

    2015-12-01

    Piezoelectric shunt damping is a well-known technique to damp mechanical vibrations of a structure, using a piezoelectric transducer to convert mechanical vibration energy into electrical energy, which is dissipated in an electrical resistance. Resonant shunts consisting of a resistance and an inductance connected to a piezoelectric transducer are used to damp structural vibrations in narrow frequency bands, but their performance is very sensitive to variations in structural modal frequencies and transducer capacitance. In order to overcome this drawback, a piezoelectric shunt damping technique with improved performance and robustness is presented in this paper. The design of the adaptive circuit considers the variation of the host structure’s natural frequency as a project parameter. This paper describes an adaptive resonant piezoelectric vibration absorber enhanced by a synthetic negative capacitance applied to a shell structure. The resonant shunt circuit autonomously adapts its inductance value by comparing the phase difference of the vibration velocity and the current flowing through the shunt circuit. Moreover, a synthetic negative capacitance is added to the shunt circuit to enhance the vibration attenuation provided by the piezoelectric absorber. The circuitry is implemented using analog components. Validation of the proposed method is done by bonding the piezoelectric absorber on a free-formed metallic shell.

  14. Non-Linear Vibration of Euler-Bernoulli Beams

    DEFF Research Database (Denmark)

    Barari, Amin; Kaliji, H. D.; Domairry, G.

    2011-01-01

    In this paper, variational iteration (VIM) and parametrized perturbation (PPM)methods have been used to investigate non-linear vibration of Euler-Bernoulli beams subjected to the axial loads. The proposed methods do not require small parameter in the equation which is difficult to be found...

  15. Background-free nonlinear microspectroscopy with vibrational molecular interferometry

    NARCIS (Netherlands)

    Garbacik, E.T.; Korterik, Jeroen P.; Otto, Cornelis; Mukamel, S.; Herek, Jennifer Lynn; Offerhaus, Herman L.; Periasamy, A.; König, K.; So, P.T.C.

    2012-01-01

    We demonstrate a method for performing nonlinear microspectroscopy that provides an intuitive and unified description of the various signal contributions, and allows the direct extraction of the vibrational response. Three optical fields create a pair of Stokes Raman pathways that interfere in the

  16. Background-Free Nonlinear Microspectroscopy with Vibrational Molecular Interferometry

    NARCIS (Netherlands)

    Garbacik, Erik T.; Korterik, Jeroen P.; Otto, Cees; Mukamel, Shaul; Herek, Jennifer L.; Offerhaus, Herman L.

    2011-01-01

    We demonstrate a method for performing nonlinear microspectroscopy that provides an intuitive and unified description of the various signal contributions, and allows the direct extraction of the vibrational response. Three optical fields create a pair of Stokes Raman pathways that interfere in the s

  17. Dynamic Analysis of Vibrating Systems with Nonlinearities

    Science.gov (United States)

    M. Kalami, Yazdi; Ahmadian, H.; Mirzabeigy, A.; Yildirim, A.

    2012-02-01

    The max-min approach is applied to mathematical models of some nonlinear oscillations. The models are regarding to three different forms that are governed by nonlinear ordinary differential equations. In this context, the strongly nonlinear Duffing oscillator with third, fifth, and seventh powers of the amplitude, the pendulum attached to a rotating rigid frame and the cubic Duffing oscillator with discontinuity are taken into consideration. The obtained results via the approach are compared with ones achieved utilizing other techniques. The results indicate that the approach has a good agreement with other well-known methods. He's max-min approach is a promising technique and can be successfully exerted to a lot of practical engineering and physical problems.

  18. Periodic solutions of nonlinear vibrating beams

    Directory of Open Access Journals (Sweden)

    J. Berkovits

    2003-01-01

    Full Text Available The aim of this paper is to prove new existence and multiplicity results for periodic semilinear beam equation with a nonlinear time-independent perturbation in case the period is not prescribed. Since the spectrum of the linear part varies with the period, the solvability of the equation depends crucially on the period which can be chosen as a free parameter. Since the period of the external forcing is generally unknown a priori, we consider the following natural problem. For a given time-independent nonlinearity, find periods T for which the equation is solvable for any T-periodic forcing. We will also deal with the existence of multiple solutions when the nonlinearity interacts with the spectrum of the linear part. We show that under certain conditions multiple solutions do exist for any small forcing term with suitable period T. The results are obtained via generalized Leray-Schauder degree and reductions to invariant subspaces.

  19. NONLINEAR VIBRATION OF CIRCULAR SANDWICH PLATES UNDER CIRCUMJACENT LOAD

    Institute of Scientific and Technical Information of China (English)

    DU Guo-jun; MA Jian-qing

    2006-01-01

    Based on yon Karman plate theory, the issue about nonlinear vibration for circular sandwich plates under circumjacent load with the loosely clamped boundary condition was researched. Nonlinear differential eigenvalue equations and boundary conditions of the problem were formulated by variational method and then their exact static solution can be got. The solution was derived by modified iteration method, so the anslytic relations between amplitude and nonlinear oscillating frequency for circular sandwich plates were obtained. When circumjacent load makes the lowest natural frequency zero,critical load is obtained.

  20. NONLINEAR DYNAMICAL CHARACTERISTICS OF PILES UNDER HORIZONTAL VIBRATION

    Institute of Scientific and Technical Information of China (English)

    HU Yu-jia; CHENG Chang-jun; YANG Xiao

    2005-01-01

    The pile-soil system is regarded as a visco-elastic half-space embedded pile. Based on the method of continuum mechanics, a nonlinear mathematical model of pilesoil interaction was established-a coupling nonlinear boundary value problem. Under the case of horizontal vibration, the nonlinearly dynamical characteristics of pile applying the axis force were studied in horizontal direction in frequency domain. The effects of parameters, especially the axis force on the stiffness were studied in detail. The numerical results suggest that it is possible that the pile applying an axis force will lose its stability. So, the effect of the axis force on the pile is considered.

  1. Nonlinear random vibration experimental results and research needs

    Science.gov (United States)

    Ibrahim, R. A.

    Experimental investigations of random excitation of dynamic systems are valuable but scarce. They are particularly important for nonlinear random vibration, since different approaches can lead to different results for the same problem. They are also useful in providing physical insight into a number of complex dynamic phenomena. The scarcity of random vibration testing is mainly due to a number of difficulties and errors encountered in generating the correct random excitation, and data acquisition. The purpose of this review article is to assess the recent experimental results reported in the literature by the author and others. An attempt will be made to correlate the experimental measurements qualitatively with those predicted analytically. In most cases, no quantitative comparisons have been made. New research directions based on recent analytical and experimental developments in the theory of nonlinear random vibration will also be outlined.

  2. Vibration confinement and energy harvesting in flexible structures using collocated absorbers and piezoelectric devices

    Science.gov (United States)

    Ouled Chtiba, M.; Choura, S.; Nayfeh, A. H.; El-Borgi, S.

    2010-03-01

    We propose an optimal design for supplementing flexible structures with a set of absorbers and piezoelectric devices for vibration confinement and energy harvesting. We assume that the original structure is sensitive to vibrations and that the absorbers are the elements where the vibration energy is confined and then harvested by means of piezoelectric devices. The design of the additional mechanical and electrical components is formulated as a dynamic optimization problem in which the objective function is the total energy of the uncontrolled structure. The locations, masses, stiffnesses, and damping coefficients of these absorbers and capacitances, load resistances, and electromechanical coupling coefficients are optimized to minimize the total energy of the structure. We use the Galerkin procedure to discretize the equations of motion that describe the coupled dynamics of the flexible structure and the added absorbers and harvesting devices. We develop a numerical code that determines the unknown parameters of a pre-specified set of absorbers and harvesting components. We input a set of initial values for these parameters, and the code updates them while minimizing the total energy in the uncontrolled structure. To illustrate the proposed design, we consider a simply supported beam with harmonic external excitations. Here, we consider two possible configurations for each of the additional piezoelectric devices, either embedded between the structure and the absorbers or between the ground and absorbers. We present simulations of the harvested power and associated voltage for each pair of collocated absorber and piezoelectric device. The simulated responses of the beam show that its energy is confined and harvested simultaneously.

  3. Nonlinear free vibrations of curved double walled carbon nanotubes using differential quadrature method

    Science.gov (United States)

    Cigeroglu, Ender; Samandari, Hamed

    2014-11-01

    Nonlinear free vibration analysis of curved double-walled carbon nanotubes (DWNTs) embedded in an elastic medium is studied in this study. Nonlinearities considered are due to large deflection of carbon nanotubes (geometric nonlinearity) and nonlinear interlayer van der Waals forces between inner and outer tubes. The differential quadrature method (DQM) is utilized to discretize the partial differential equations of motion in spatial domain, which resulted in a nonlinear set of algebraic equations of motion. The effect of nonlinearities, different end conditions, initial curvature, and stiffness of the surrounding elastic medium, and vibrational modes on the nonlinear free vibration of DWCNTs is studied. Results show that it is possible to detect different vibration modes occurring at a single vibration frequency when CNTs vibrate in the out-of-phase vibration mode. Moreover, it is observed that boundary conditions have significant effect on the nonlinear natural frequencies of the DWCNT including multiple solutions.

  4. Nonlinear Forced Vibration Analysis for Thin Rectangular Plate on Nonlinear Elastic Foundation

    Directory of Open Access Journals (Sweden)

    Zhong Zhengqiang

    2013-02-01

    Full Text Available Nonlinear forced vibration is analyzed for thin rectangular plate with four free edges on nonlinear elastic foundation. Based on Hamilton variation principle, equations of nonlinear vibration motion for thin rectangular plate under harmonic loads on nonlinear elastic foundation are established. In the case of four free edges, viable expressions of trial functions for this specification are proposed, satisfying all boundary conditions. Then, equations are transformed to a system of nonlinear algebraic equations by using Galerkin method and are solved by using harmonic balance method. In the analysis of numerical computations, the effect on the amplitude-frequency characteristic curve due to change of the structural parameters of plate, parameters of foundation and parameters of excitation force are discussed.

  5. Roof Isolation System - A Vibration Absorber for Buildings

    Institute of Scientific and Technical Information of China (English)

    田志昌; 钱稼茹

    2001-01-01

    A roof isolation system is proposed to reduce the dynamic response of buildings to earthquake excitations. In the system, frictional materials are inserted between the roof slab and the beams that support the slab. The roof slab and the beams are connected by springs. The optimum stiffness of the system is determined to minimize the seismic response of the buildings. A comparative study of the responses of an eight-story frame structure with and without the proposed system to ground motions was carried out to assess the system effectiveness. The study showed that the system energy dissipation capacity is nonlinear. The effectiveness of the system is related to the frequency and the acceleration of the ground motion. The system reduces the maximum lateral displacement response and the maximum inter-story drift response of the building by as much as 45% except for the roof.

  6. Vibration suppression of speed-controlled robots with nonlinear control

    Science.gov (United States)

    Boscariol, Paolo; Gasparetto, Alessandro

    2016-06-01

    In this paper, a simple nonlinear control strategy for the simultaneous position tracking and vibration damping of robots is presented. The control is developed for devices actuated by speed-controlled servo drives. The conditions for the asymptotic stability of the closed-loop system are derived by ensuring its passivity. The capability of achieving improved trajectory tracking and vibration suppression is shown through experimental tests conducted on a three-axis Cartesian robot. The control is aimed to be compatible with most industrial applications given the simplicity of implementation, the reduced computational requirements, and the use of joint position as the only measured signal.

  7. Carbonyl iron powder surface modification of magnetorheological elastomers for vibration absorbing application

    Science.gov (United States)

    Chen, Dong; Yu, Miao; Zhu, Mi; Qi, Song; Fu, Jie

    2016-11-01

    With excellent characteristic of magnetic-control stiffness, magnetorheological elastomer (MRE) is well suited as a spring element of vibration absorber. To improve the vibration attenuation performance of MRE vibration absorbers, this paper expects to improve the mechanical strength and reduce the loss factor of MRE by interface modification. The surface of carbonyl iron powder (CIP) was modified with silica coating by a simple and convenient approach. Several MRE samples, with different proportions of modified CIPs were fabricated under a constant magnetic field. The morphology and composition of modified CIP were characterized by scanning electron microscope and Fourier transform infrared spectra. The results indicated that the modified CIPs were coated with uniform and continuous silica, which can make a better combination between particle and matrix. The tensile strength, magnetorheological properties and the damping properties of the MRE samples were tested by material testing machine and rheometer. The experimental results demonstrated that the loss factor of the MRE which incorporated with modified CIPs decreased markedly, and the tensile strength of such material has been much improved, at the same time this kind of MRE kept high MR effect. It is expected that this MRE material will meet the requirements of vibration absorber.

  8. Resonant passive–active vibration absorber with integrated force feedback control

    DEFF Research Database (Denmark)

    Høgsberg, Jan Becker; Brodersen, Mark Laier; Krenk, Steen

    2016-01-01

    A general format of a two-terminal vibration absorber is constructed by placing a passive unit in series with a hybrid unit, composed of an active actuator in parallel with a second passive element. The displacement of the active actuator is controlled by an integrated feedback control...... with the difference in force between the two passive elements as input. This format allows passive and active contributions to be combined arbitrarily within the hybrid unit, which results in a versatile absorber format with guaranteed closed-loop stability. This is demonstrated for resonant absorbers with inertia...... realized passively by a mechanical inerter or actively by the integrated force feedback. Accurate calibration formulae are presented for two particular absorber configurations and the performance is subsequently demonstrated with respect to both equal modal damping and effective response reduction....

  9. Tremor Reduction at the Palm of a Parkinson’s Patient Using Dynamic Vibration Absorber

    Directory of Open Access Journals (Sweden)

    Sarah Gebai

    2016-07-01

    Full Text Available Parkinson’s patients suffer from severe tremor due to an abnormality in their central oscillator. Medications used to decrease involuntary antagonistic muscles contraction can threaten their life. However, mechanical vibration absorbers can be used as an alternative treatment. The objective of this study is to provide a dynamic modeling of the human hand that describes the biodynamic response of Parkinson’s patients and to design an effective tuned vibration absorber able to suppress their pathological tremor. The hand is modeled as a three degrees-of-freedom (DOF system describing the flexion motion at the proximal joints on the horizontal plane. Resting tremor is modeled as dual harmonic excitation due to shoulder and elbow muscle activation operating at resonance frequencies. The performance of the single dynamic vibration absorber (DVA is studied when attached to the forearm and compared with the dual DVA tuned at both excitation frequencies. Equations of motion are derived and solved using the complex transfer function of the non-Lagrangian system. The absorber’s systems are designed as a stainless steel alloy cantilevered beam with an attached copper mass. The dual DVA was the most efficient absorber which reduces 98.3%–99.5%, 97.0%–97.3% and 97.4%–97.5% of the Parkinson’s tremor amplitude at the shoulder, elbow and wrist joint.

  10. A Nonlinear Vortex Induced Vibration Model of Marine Risers

    Institute of Scientific and Technical Information of China (English)

    LIU Juan; HUANG Weiping

    2013-01-01

    With the exploitation of oil and gas in deep water,the traditional vortex induced vibration (VIV) theory is challenged by the unprecedented flexibility of risers.A nonlinear time-dependent VIV model is developed in this paper based on a VIV lift force model and the Morison equation.Both the inline vibration induced by the flow due to vortex shedding and the fluid-structure interaction in the transverse direction are included in the model.One of the characteristics of the model is the response-dependent lift force with nonlinear damping,which is different from other VIV models.The calculations show that the model can well describe the VIV of deepwater risers with the results agreeing with those calculated by other models.

  11. Chaotic vibrations of tubes with nonlinear supports in crossflow

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Y.; Chen, S.S.

    1992-12-01

    By means of the unsteady flow theory and a bilinear mathematical model, a theoretical study is presented for chaotic vibrations associated with the fluidelastic instability of nonlinearly supported tubes in a crossflow. A series of effective tools, including phase portraits, power spectral density, Poincar`e maps, Lyapunov exponent, fractal dimension, and bifurcation diagrams, are utilized to distinguish periodic and chaotic motions when the tubes vibrate in the instability region. Results show periodic and chaotic motions in the region corresponding to the fluid damping controlled instability. Nonlinear supports, with symmetric or asymmetric gaps, significantly affect the distributions of periodic, quasiperiodic and chaotic motions of the tube with various flow velocity in the instability region of the TSP(tube-support-plate)-inactive mode.

  12. Chaotic vibrations of tubes with nonlinear supports in crossflow

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Y.; Chen, S.S.

    1992-01-01

    By means of the unsteady flow theory and a bilinear mathematical model, a theoretical study is presented for chaotic vibrations associated with the fluidelastic instability of nonlinearly supported tubes in a crossflow. A series of effective tools, including phase portraits, power spectral density, Poincar'e maps, Lyapunov exponent, fractal dimension, and bifurcation diagrams, are utilized to distinguish periodic and chaotic motions when the tubes vibrate in the instability region. Results show periodic and chaotic motions in the region corresponding to the fluid damping controlled instability. Nonlinear supports, with symmetric or asymmetric gaps, significantly affect the distributions of periodic, quasiperiodic and chaotic motions of the tube with various flow velocity in the instability region of the TSP(tube-support-plate)-inactive mode.

  13. Chaotic vibrations of nonlinearly supported tubes in crossflow

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Y.; Chen, S.S.

    1992-02-01

    By means of the unsteady-flow theory and a bilinear mathematical model, a theoretical study is presented for chaotic vibrations associated with the fluidelastic instability of nonlinearly supported tubes in a crossflow. Effective tools, including phase portraits, power spectral density, Poincare maps, Lyapunov exponent, fractal dimension, and bifurcation diagrams, are utilized to distinguish periodic and chaotic motions when the tubes vibrate in the instability region. The results show periodic and chaotic motions in the region corresponding to fluid-damping-controlled instability. Nonlinear supports, with symmetric or asymmetric gaps, significantly affect the distribution of periodic, quasiperiodic, and chaotic motions of a tube exposed to various flow velocities in the instability region of the tube-support-plate-inactive mode.

  14. Auto-identifying Diagnostic Symptom of Nonlinear Vibration

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The technology of diagnostic symptom identification of nonlinear vibration is based on a database of a diagnostic case. This paper defines the periodic degree, quasi-periodic degree, and chaotic degree of a Poincare map, an iterated map, and adopts the image-identification theory, so the three states of periodic, quasi-periodic, and chaotic running states of a machine can be distinguished. It also defines the variable identity, rotating angle and spread degree. The database of diagnostic case is expressed by means of an access database. The diagnostic symptoms are identified using the difference between the Poincare maps of samples and the fault-case. Finally, we demonstrate an identification system of a nonlinear vibration diagnostic symptom of large rotating machinery.

  15. Development of a semi-active dynamic vibration absorber for longitudinal vibration of propulsion shaft system based on magnetorheological elastomer

    Science.gov (United States)

    Liu, Gaoyu; Lu, Kun; Zou, Donglin; Xie, Zhongliang; Rao, Zhushi; Ta, Na

    2017-07-01

    The control of the longitudinal pulsating force and the vibration generated is very important to improve the stealth performance of a submarine. Magnetorheological elastomer (MRE) is a kind of intelligent composite material, whose mechanical properties can be continuously, rapidly and reversibly controlled by an external magnetic field. It can be used as variable-stiffness components in the design of a semi-active dynamic vibration absorber (SDVA), which is one of the effective means of longitudinal vibration control. In this paper, an SDVA is designed based on the MRE’s magnetic-induced variable stiffness characteristic. Firstly, a mechanical model of the propulsion shaft system with the SDVA is proposed, theoretically discussed and numerically validated. Then, the mechanical performance of the MRE under different magnetic fields is tested. In addition, the magnetic circuit and the overall structure of the SDVA are designed. Furthermore, electromagnetic and thermodynamic simulations are carried out to guarantee the structural design. The frequency shift property of the SDVA is found through dynamic simulations and validated by a frequency shift experiment. Lastly, the vibration absorption capacity of the SDVA is investigated. The results show that the magnetorheological effect of the MRE and the frequency shift of the SDVA are obvious; the SDVA has relatively acceptable vibration absorption capacity.

  16. Nonlinear Vibration Analysis of Moving Strip with Inertial Boundary Condition

    Directory of Open Access Journals (Sweden)

    Chong-yi Gao

    2015-01-01

    Full Text Available According to the movement mechanism of strip and rollers in tandem mill, the strip between two stands was simplified to axially moving Euler beam and the rollers were simplified to the inertial component on the fixed axis rotation, namely, inertial boundary. Nonlinear vibration mechanical model of Euler beam with inertial boundary conditions was established. The transverse and longitudinal motion equations were derived based on Hamilton’s principle. Kantorovich averaging method was employed to discretize the motion equations and the inertial boundary equations, and the solutions were obtained using the modified iteration method. Depending on numerical calculation, the amplitude-frequency responses of Euler beam were determined. The axial velocity, tension, and rotational inertia have strong influences on the vibration characteristics. The results would provide an important theoretical reference to control and analyze the vertical vibration of moving strip in continuous rolling process.

  17. Stability Analysis of Nonlinear Vibrations of a Deploying Flexible Beam

    Institute of Scientific and Technical Information of China (English)

    JunfengLI; ZhaolinWANG

    1996-01-01

    Consider a rigid-flexible coupled system which consists of a central rigid body deploying a flexible appendage,The appendage is modeled as a finite deflection beam having linear constitutive equations.By taking the energy integral as Lyapunov function,it is proved that nonlinear transverse vibrations of the beam undergoing uniform extension or retrieval are stable when there are not controlling moment in the central rigid body and driving force on the beam,according to the partial stablity theorem.

  18. Uncertainty propagation for nonlinear vibrations: A non-intrusive approach

    Science.gov (United States)

    Panunzio, A. M.; Salles, Loic; Schwingshackl, C. W.

    2017-02-01

    The propagation of uncertain input parameters in a linear dynamic analysis is reasonably well established today, but with the focus of the dynamic analysis shifting towards nonlinear systems, new approaches is required to compute the uncertain nonlinear responses. A combination of stochastic methods (Polynomial Chaos Expansion, PCE) with an Asymptotic Numerical Method (ANM) for the solution of the nonlinear dynamic systems is presented to predict the propagation of random input uncertainties and assess their influence on the nonlinear vibrational behaviour of a system. The proposed method allows the computation of stochastic resonance frequencies and peak amplitudes based on multiple input uncertainties, leading to a series of uncertain nonlinear dynamic responses. One of the main challenges when using the PCE is thereby the Gibbs phenomenon, which can heavily impact the resulting stochastic nonlinear response by introducing spurious oscillations. A novel technique to avoid the Gibbs phenomenon is be presented in this paper, leading to high quality frequency response predictions. A comparison of the proposed stochastic nonlinear analysis technique to traditional Monte Carlo simulations, demonstrates comparable accuracy at a significantly reduced computational cost, thereby validating the proposed approach.

  19. Constrained Optimal Stochastic Control of Non-Linear Wave Energy Point Absorbers

    DEFF Research Database (Denmark)

    Sichani, Mahdi Teimouri; Chen, Jian-Bing; Kramer, Morten

    2014-01-01

    The paper deals with the stochastic optimal control of a wave energy point absorber with strong nonlinear buoyancy forces using the reactive force from the electric generator on the absorber as control force. The considered point absorber has only one degree of freedom, heave motion, which is used...... presented in the paper. The effect of nonlinear buoyancy force – in comparison to linear buoyancy force – and constraints of the controller on the power outtake of the device have been studied in details and supported by numerical simulations....

  20. Optimization of a tuned vibration absorber in a multibody system by operational analysis

    Science.gov (United States)

    Infante, F.; Perfetto, S.; Mayer, D.; Herold, S.

    2016-09-01

    Mechanical vibration in a drive-train can affect the operation of the system and must be kept below structural thresholds. For this reason tuned vibration absorbers (TVA) are usually employed. They are optimally designed for a single degree of freedom system using the Den Hartog technique. On the other hand, vibrations can be used to produce electrical energy exploitable locally avoiding the issues to transfer it from stationary devices to rating parts. Thus, the design of an integrated device for energy harvesting and vibration reduction is proposed to be employed in the drive-train. By investigation of the dynamic torque in the system under real operation, the accuracy of a numerical model for the multibody is evaluated. In this study, this model is initially used for the definition of the TVA. An energetic procedure is applied in order to reduce the multibody in an equivalent single degree of freedom system for a particular natural mode. Hence, the design parameters of the absorber are obtained. Furthermore, the introduction of the TVA in the model is considered to evaluate the vibration reduction. Finally, an evaluation of the power generated by the piezo transducer and its feedback on the dynamic of the drive-train is performed.

  1. Vibration isolation by exploring bio-inspired structural nonlinearity.

    Science.gov (United States)

    Wu, Zhijing; Jing, Xingjian; Bian, Jing; Li, Fengming; Allen, Robert

    2015-10-08

    Inspired by the limb structures of animals/insects in motion vibration control, a bio-inspired limb-like structure (LLS) is systematically studied for understanding and exploring its advantageous nonlinear function in passive vibration isolation. The bio-inspired system consists of asymmetric articulations (of different rod lengths) with inside vertical and horizontal springs (as animal muscle) of different linear stiffness. Mathematical modeling and analysis of the proposed LLS reveal that, (a) the system has very beneficial nonlinear stiffness which can provide flexible quasi-zero, zero and/or negative stiffness, and these nonlinear stiffness properties are adjustable or designable with structure parameters; (b) the asymmetric rod-length ratio and spring-stiffness ratio present very beneficial factors for tuning system equivalent stiffness; (c) the system loading capacity is also adjustable with the structure parameters which presents another flexible benefit in application. Experiments and comparisons with existing quasi-zero-stiffness isolators validate the advantageous features above, and some discussions are also given about how to select structural parameters for practical applications. The results would provide an innovative bio-inspired solution to passive vibration control in various engineering practice.

  2. Resonant passive–active vibration absorber with integrated force feedback control

    DEFF Research Database (Denmark)

    Høgsberg, Jan Becker; Brodersen, Mark Laier; Krenk, Steen

    2016-01-01

    A general format of a two-terminal vibration absorber is constructed by placing a passive unit in series with a hybrid unit, composed of an active actuator in parallel with a second passive element. The displacement of the active actuator is controlled by an integrated feedback control with the d......A general format of a two-terminal vibration absorber is constructed by placing a passive unit in series with a hybrid unit, composed of an active actuator in parallel with a second passive element. The displacement of the active actuator is controlled by an integrated feedback control...... with the difference in force between the two passive elements as input. This format allows passive and active contributions to be combined arbitrarily within the hybrid unit, which results in a versatile absorber format with guaranteed closed-loop stability. This is demonstrated for resonant absorbers with inertia...... realized passively by a mechanical inerter or actively by the integrated force feedback. Accurate calibration formulae are presented for two particular absorber configurations and the performance is subsequently demonstrated with respect to both equal modal damping and effective response reduction....

  3. Homotopy analysis approach for nonlinear piezoelectric vibration energy harvesting

    Directory of Open Access Journals (Sweden)

    Shahlaei-Far Shahram

    2016-01-01

    Full Text Available Piezoelectric energy harvesting from a vertical geometrically nonlinear cantilever beam with a tip mass subject to transverse harmonic base excitations is analyzed. One piezoelectric patch is placed on the slender beam to convert the tension and compression into electrical voltage. Applying the homotopy analysis method to the coupled electromechanical governing equations, we derive analytical solutions for the horizontal displacement of the tip mass and consequently the output voltage from the piezoelectric patch. Analytical approximation for the frequency response and phase of the geometrically forced nonlinear vibration system are also obtained. The research aims at a rigorous analytical perspective on a nonlinear problem which has previously been solely investigated by numerical and experimental methods.

  4. Asymptotic analysis of a vibrating cantilever with a nonlinear boundary

    Institute of Scientific and Technical Information of China (English)

    C.; W.; LIM

    2009-01-01

    Nonlinear vibration of a cantilever in a contact atomic force microscope is analyzed via an asymptotic approach. The asymptotic solution is sought for a beam equation with a nonlinear boundary condition. The steady-state responses are determined in primary resonance and subharmonic resonance. The relations between the response amplitudes and the excitation frequencies and amplitudes are derived from the solvability condition. Multivaluedness occurs in the relations as a consequence of the nonlinearity. The stability of steady-state responses is analyzed by use of the Lyapunov linearized stability theory. The stability analysis predicts the jumping phenomenon for certain parameters. The curves of the response amplitudes changing with the excitation frequencies are numerically compared with those obtained via the method of multiple scales. The calculation results demonstrate that the two methods predict the same varying tendencies while there are small quantitative differences.

  5. Asymptotic analysis of a vibrating cantilever with a nonlinear boundary

    Institute of Scientific and Technical Information of China (English)

    CHEN LiQun; C.W.LIM; HU QingQuan; DING Hu

    2009-01-01

    Nonlinear vibration of a cantilever in a contact atomic force microscope is analyzed via an asymptotic approach.The asymptotic solution is sought for a beam equation with a nonlinear boundary condition.The steady-state responses are determined in primary resonance and subharmonic resonance.The relations between the response amplitudes and the excitation frequencies and amplitudes are derived from the solvability condition.Multivaluedness occurs in the relations as a consequence of the nonlinearity.The stability of steady-state responses is analyzed by use of the Lyapunov linearized sta-bility theory.The stability analysis predicts the jumping phenomenon for certain parameters.The curves of the response amplitudes changing with the excitation frequencies are numerically compared with those obtained via the method of multiple scales.The calculation results demonstrate that the two methods predict the same varying tendencies while there are small quantitative differences.

  6. Asymptotic analysis of a vibrating cantilever with a nonlinear boundary

    Science.gov (United States)

    Chen, Liqun; Lim, C. W.; Hu, Qingquan; Ding, Hu

    2009-09-01

    Nonlinear vibration of a cantilever in a contact atomic force microscope is analyzed via an asymptotic approach. The asymptotic solution is sought for a beam equation with a nonlinear boundary condition. The steady-state responses are determined in primary resonance and subharmonic resonance. The relations between the response amplitudes and the excitation frequencies and amplitudes are derived from the solvability condition. Multivaluedness occurs in the relations as a consequence of the nonlinearity. The stability of steady-state responses is analyzed by use of the Lyapunov linearized stability theory. The stability analysis predicts the jumping phenomenon for certain parameters. The curves of the response amplitudes changing with the excitation frequencies are numerically compared with those obtained via the method of multiple scales. The calculation results demonstrate that the two methods predict the same varying tendencies while there are small quantitative differences.

  7. Nonlinear vibration and rippling instability for embedded carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Soltani, Payam; Mehdipour, I. [Islamic Azad University, Semnan (Iran, Islamic Republic of); Farshidianfar, A. [Ferdowsi University of Mashhad, Mashhad (Iran, Islamic Republic of); Ganji, D. D. [Babol University of Technology, Babol (Iran, Islamic Republic of)

    2012-04-15

    Based on the rippling deformations, a nonlinear continuum elastic model is developed to analyze the transverse vibration of single walled carbon nanotubes (SWCNTs) embedded on a Winkler elastic foundation. The nonlinear natural frequency has been derived analytically for typical boundary conditions using the perturbation method of multi-scales. The results indicate that the nonlinear resonant frequency due to the rippling is related to the stiffness of the foundation, the boundary conditions, the excitation load-to-damping ratio, and the diameter-to-length ratio. Moreover, the rippling instability of carbon nanotubes, as a structural instability, is introduced and the influences of several effective parameters on this kind of instability are widely discussed.

  8. Parametric characteristic of the random vibration response of nonlinear systems

    Institute of Scientific and Technical Information of China (English)

    Xing-Jian Dong; Zhi-Ke Peng; Wen-Ming Zhang; Guang Meng; Fu-Lei Chu

    2013-01-01

    Volterra series is a powerful mathematical tool for nonlinear system analysis,and there is a wide range of non-linear engineering systems and structures that can be represented by a Volterra series model.In the present study,the random vibration of nonlinear systems is investigated using Volterra series.Analytical expressions were derived for the calculation of the output power spectral density (PSD) and input-output cross-PSD for nonlinear systems subjected to Gaussian excitation.Based on these expressions,it was revealed that both the output PSD and the input-output crossPSD can be expressed as polynomial functions of the nonlinear characteristic parameters or the input intensity.Numerical studies were carried out to verify the theoretical analysis result and to demonstrate the effectiveness of the derived relationship.The results reached in this study are of significance to the analysis and design of the nonlinear engineering systems and structures which can be represented by a Volterra series model.

  9. Coarse-fine adaptive tuned vibration absorber with high frequency resolution

    Science.gov (United States)

    Wang, Xi; Yang, Bintang; You, Jiaxin; Gao, Zhe

    2016-11-01

    The speed fluctuation of satellite-rotary-mechanisms causes vibration of slightly different frequencies. The critical requirements of satellites need a vibration control device with high frequency resolution to suppress the vibration. This paper presents a coarse-fine adaptive tuned vibration absorber (ATVA) with high frequency resolution. The coarse-fine ATVA which simultaneously satisfies the requirements of high resolution and relatively wide effective bandwidth is capable of tracking the variable exciting frequency adaptively to suppress the vibration of the primary system. The coarse-fine ATVA is divided into a coarse tuning segment and a fine tuning segment. The coarse tuning segment is used to tune the required natural frequency in a relatively wide effective bandwidth and the fine tuning segment can achieve precise tune in a tiny-scale bandwidth. The mathematical model of the coarse tuning and the fine tuning is proposed to design the parameters of the coarse-fine ATVA. The experimental test results indicate the coarse tuning bandwidth of the coarse-fine ATVA is 8.7 Hz to 29 Hz and the minimum resolution of the fine tuning is 0.05 Hz. Moreover, a significant vibration attenuation of 15dB is verified in the effective bandwidth.

  10. Active-passive vibration absorber of beam-cart-seesaw system with piezoelectric transducers

    Science.gov (United States)

    Lin, J.; Huang, C. J.; Chang, Julian; Wang, S.-W.

    2010-09-01

    In contrast with fully controllable systems, a super articulated mechanical system (SAMS) is a controlled underactuated mechanical system in which the dimensions of the configuration space exceed the dimensions of the control input space. The objectives of the research are to develop a novel SAMS model which is called beam-cart-seesaw system, and renovate a novel approach for achieving a high performance active-passive piezoelectric vibration absorber for such system. The system consists of two mobile carts, which are coupled via rack and pinion mechanics to two parallel tracks mounted on pneumatic rodless cylinders. One cart carries an elastic beam, and the other cart acts as a counterbalance. One adjustable counterweight mass is also installed underneath the seesaw to serve as a passive damping mechanism to absorb impact and shock energy. The motion and control of a Bernoulli-Euler beam subjected to the modified cart/seesaw system are analyzed first. Moreover, gray relational grade is utilized to investigate the sensitivity of tuning the active proportional-integral-derivative (PID) controller to achieve desired vibration suppression performance. Consequently, it is shown that the active-passive vibration absorber can not only provide passive damping, but can also enhance the active action authority. The proposed software/hardware platform can also be profitable for the standardization of laboratory equipment, as well as for the development of entertainment tools.

  11. Research on Simulation and Test of the Nonlinear Responses for the Hydraulic Shock Absorber

    Institute of Scientific and Technical Information of China (English)

    张建武; 刘延庆

    2003-01-01

    Basically on the multi-body system dynamics,the virtual prototype of the hydraulic shock absorber for the bench test is developed in the ADAMS environment.Dynamic behaviors of the absorber are studied by both computer simulation and real test.Numerical predictions of dynamic responses are produced by the established virtual prototype of the absorber and compared with experimental results.It has been shown from the comparison that the vibration behaviors of the prototype with hysteretic damping characteristics are considered to be more identical with the bench test results than those of the same prototype with piecewise linear damping properties are.The current virtual prototype of the shock absorber is correct and can be a developing terrace for the optimizing design of the absorber and matching capability of the whole car.

  12. Minimization of the mean square velocity response of dynamic structures using an active-passive dynamic vibration absorber.

    Science.gov (United States)

    Cheung, Y L; Wong, W O; Cheng, L

    2012-07-01

    An optimal design of a hybrid vibration absorber (HVA) with a displacement and a velocity feedback for minimizing the velocity response of the structure based on the H(2) optimization criterion is proposed. The objective of the optimal design is to reduce the total vibration energy of the vibrating structure under wideband excitation, i.e., the total area under the velocity response spectrum is minimized in this criterion. One of the inherent limitations of the traditional passive vibration absorber is that its vibration suppression is low if the mass ratio between the absorber mass and the mass of the primary structure is low. The active element of the proposed HVA helps further reduce the vibration of the controlled structure, and it can provide very good vibration absorption performance even at a low mass ratio. Both the passive and active elements are optimized together for the minimization of the mean square velocity of the primary system as well as the active force required in the HVA. The proposed HVA was tested on single degree-of-freedom (SDOF) and continuous vibrating structures and compared to the traditional passive vibration absorber.

  13. Local absorbing boundary conditions for nonlinear wave equation on unbounded domain.

    Science.gov (United States)

    Li, Hongwei; Wu, Xiaonan; Zhang, Jiwei

    2011-09-01

    The numerical solution of the nonlinear wave equation on unbounded spatial domain is considered. The artificial boundary method is introduced to reduce the nonlinear problem on unbounded spatial domain to an initial boundary value problem on a bounded domain. Using the unified approach, which is based on the operator splitting method, we construct the efficient nonlinear local absorbing boundary conditions for the nonlinear wave equation, and give the stability analysis of the resulting boundary conditions. Finally, several numerical examples are given to demonstrate the effectiveness of our method.

  14. 吸振器底座对减振效果的影响%Study on Influence of Vibration Absorber' s Base on Its Vibration Attenuation Effect

    Institute of Scientific and Technical Information of China (English)

    徐振邦

    2011-01-01

    In reality, all vibration absorbers have bases. When the vibration absorber is fixed to a flexible base, the base will affect its vibration attenuation effect. Aiming at this problem, simulation researches are carried out with the power flow method in this paper. A mathematical model of the system composed of the vibration absorber with a base and coupled with an ends-fixed beam is established. With this model, the vibration attenuation effects of the vibration absorbers fixed at different positions of the beam are simulated, and the influence of the base size on the vibration attenuation effect is analyzed. On the basis, the vibration attenuation effect with double vibration absorbers attached is compared with that with a single vibration absorber attached. The results show that the vibration attenuation effect of the vibration absorber can be improved effectively by optimizing its base and installation condition. This work provides guidance for the engineering application of the vibration absorbers.%实际使用的吸振器都具有一定尺寸的安装底座.当吸振器安装于柔性主系统时,底座将影响吸振器的减振效果.针对此问题,利用功率流方法进行仿真研究.建立有底座吸振器和两端固支梁主系统耦合的数学模型.利用该模型对吸振器安装在梁上三个不同位置的情况进行仿真研究,并分析底座尺寸的影响,在此基础上比较两个吸振器和单个吸振器的减振效果.研究结果表明,通过优化吸振器的底座和安装方式能够有效地改善吸振器的减振性能.这为吸振器的工程应用提供一定的参考.

  15. Nonlinear behavior of vibrating molecules on suspended graphene waveguides

    CERN Document Server

    Banerjee, Amrita

    2015-01-01

    Suspended graphene waveguides were deposited on micron-scale periodic metal (plasmonic) structures. Raman scattering of test molecules (B. Megaterium), deposited on the waveguides' surface, exhibited azimuthal cycles upon rotation: at these micron scales, spontaneous Raman ought to be independent of phase matching conditions. In addition, we observed angular-selective quadratic intensity dependence contrary to the typical linear behavior of spontaneous Raman. The effects were observed at very modest pump laser intensities (<10 MW/cm2 at the sample surface, oftenly used in Raman experiments). We attributed these observations to nonlinear coupling between the vibrating molecules and surface plasmon polariton (SPP) modes at the molecular vibration frequency. It was assessed that the polariton mode propagates through fairly long distances (over 100 microns).

  16. Nonlinear thermoelectric properties of molecular junctions with vibrational coupling

    DEFF Research Database (Denmark)

    Leijnse, Martin Christian; Wegewijs, M. R.; Flensberg, Karsten

    2010-01-01

    We present a detailed study of the nonlinear thermoelectric properties of a molecular junction, represented by a dissipative Anderson-Holstein model. A single-orbital level with strong Coulomb interaction is coupled to a localized vibrational mode and we account for both electron and phonon...... exchange with both electrodes, investigating how these contribute to the heat and charge transports. We calculate the efficiency and power output of the device operated as a heat to electric power converter in the regime of weak tunnel coupling and phonon exchange rate and identify the optimal operating...... conditions, which are found to be qualitatively changed by the presence of the vibrational mode. Based on this study of a generic model system, we discuss the desirable properties of molecular junctions for thermoelectric applications....

  17. Unified approach to split absorbing boundary conditions for nonlinear Schrödinger equations.

    Science.gov (United States)

    Zhang, Jiwei; Xu, Zhenli; Wu, Xiaonan

    2008-08-01

    An efficient method is proposed for numerical solutions of nonlinear Schrödinger equations on an unbounded domain. Through approximating the kinetic energy term by a one-way equation and uniting it with the potential energy equation, absorbing boundary conditions are designed to truncate the unbounded domain, which are in nonlinear form and can perfectly absorb waves outgoing from the boundaries of the truncated computational domain. The stability of the induced initial boundary value problem defined on the computational domain is examined by a normal mode analysis. Numerical examples are given to illustrate the stable and tractable advantages of the method.

  18. Suppression of wind-induced vibrations of a seesaw-type oscillator by means of a dynamic absorber

    NARCIS (Netherlands)

    Lumbantobing, H.

    2003-01-01

    In this paper the suppression of wind-induced vibrations of a seesaw-type oscillator by means of a dynamic absorber is considered. With suppression the shift of the critical flow velocity to higher values as well as the reduction of vibration amplitudes is meant. The equations of motion are derived

  19. Parametric study on a collocated PZT beam vibration absorber and power harvester

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Shyh Chin [Mechanical Engineering, Ming Chi University of Technology, New Taipei (China); Tsai, Chao Yang [Mechanical Engineering Army Academy, R.O.C., Taoyuan (China); Liao, Hsiao Hui [LNG Construction and Project Division, CPC Corp., Taipei (China)

    2016-11-15

    The parametric effects of a PZT beam that is simultaneously used as a vibration absorber and a power harvester were investigated in this study. A cantilever beam paved with PZT layers and with added tip mass has been widely used as a harvester or sometimes as a Dynamic vibration absorber (DVA). However, the beam is rarely considered a collocated device. In this study, the first step was theoretical derivation of a distributed beam covered with bimorph PZT layers. Then, the beam was attached to a 1DOF vibratory main system. Two indicators for vibration absorption and power harvesting were defined. Numerical results demonstrated that the lumped mass ratio favored both of the abilities, but that the DVA mass ratio influenced these two abilities in exactly the opposite way. The conjunction of a harvester circuit into a DVA shifted its resonance frequency up to 5 % (an extreme case of open circuit R→∞). Simultaneous power harvesting diminished the absorption capability up to 35 % for each set of mass ratios. To achieve the maximum degree of power harvesting, a corresponding load resistance that somewhat increases with the lumped mass ratio is applied. Experimental results verified the existence of the best load resistance, but the measured harvested curve was lower than the theoretical calculation because of structure damping and deviations of PZT material properties.

  20. Improved design of dynamic vibration absorber by using the inerter and its application in vehicle suspension

    Science.gov (United States)

    Shen, Yujie; Chen, Long; Yang, Xiaofeng; Shi, Dehua; Yang, Jun

    2016-01-01

    Inerter is a recently proposed mechanical element with two terminals. The novelty of this paper is to present the improved design which aims to add traditional dynamic vibration absorber to the vehicle body by using the inerter. Based on this background, a new vehicle suspension structure called ISD suspension, including the inerter, spring and damper has been created. A dual-mass vibration model including the ISD suspension is considered in this study. Parameters are obtained by using the genetic optimizing algorithm. The frequency-domain simulation confirms that the ISD suspension can effectively improve the damping performance of the suspension system, especially at the offset frequency of the vehicle body, which is consistent with the feature of the dynamic vibration absorber added to the vehicle body mass. At last, a prototype ball screw inerter has been designed and the bench test of a quarter-car model has been undertaken. Under the conditions of the random road input, the vehicle ride comfort evaluation of body acceleration RMS value decreases by 4% at most, the suspension deflection RMS value decreases by 16% at most, the tire dynamic load RMS value decreases by 6% at most. Power spectral density results also indicate that the ISD suspension has superior damping performance than passive suspension which proves that the proposed ISD suspension is deemed effective.

  1. Adaptive Helmholtz resonators and passive vibration absorbers for cylinder interior noise control

    Science.gov (United States)

    Estève, Simon J.; Johnson, Marty E.

    2005-12-01

    This paper presents an adaptive-passive solution to control the broadband sound transmission into rocket payload fairings. The treatment is composed of passive distributed vibration absorbers (DVAs) and adaptive Helmholtz resonators (HR). Both the frequency domain and time-domain model of a simply supported cylinder excited by an external plane wave are developed. To tune vibration absorbers to tonal excitation, a tuning strategy, based on the phase information between the velocity of the absorber mass and the velocity of the host structure is used here in a new fashion to tune resonators to peaks in the broadband acoustic spectrum of a cavity. This tuning law, called the dot-product method, only uses two microphone signals local to each HR, which allows the adaptive Helmholtz resonator (AHR) to be manufactured as an autonomous device with power supply, sensor, actuator and controller integrated. Numerical simulations corresponding to a 2.8 m long 2.5 m diameter composite cylinder prototype demonstrate that, as long as the structure modes, which strongly couple to the acoustic cavity, are damped with a DVA treatment, the dot-product method tune multiple HRs to a near-optimal solution over a broad frequency range (40-160 Hz). An adaptive HR prototype with variable opening is built and characterized. Experiments conducted on the cylinder prototype with eight AHRs demonstrate the ability of resonators adapted with the dot-product method to converge to near-optimal noise attenuation in a frequency band including multiple resonances.

  2. Nonlinear vibrations of functionally graded doubly curved shallow shells

    Science.gov (United States)

    Alijani, F.; Amabili, M.; Karagiozis, K.; Bakhtiari-Nejad, F.

    2011-03-01

    Nonlinear forced vibrations of FGM doubly curved shallow shells with a rectangular base are investigated. Donnell's nonlinear shallow-shell theory is used and the shell is assumed to be simply supported with movable edges. The equations of motion are reduced using the Galerkin method to a system of infinite nonlinear ordinary differential equations with quadratic and cubic nonlinearities. Using the multiple scales method, primary and subharmonic resonance responses of FGM shells are fully discussed and the effect of volume fraction exponent on the internal resonance conditions, softening/hardening behavior and bifurcations of the shallow shell when the excitation frequency is (i) near the fundamental frequency and (ii) near two times the fundamental frequency is shown. Moreover, using a code based on arclength continuation method, a bifurcation analysis is carried out for a special case with two-to-one internal resonance between the first and second doubly symmetric modes with respect to the panel's center ( ω13≈2 ω11). Bifurcation diagrams and Poincaré maps are obtained through direct time integration of the equations of motion and chaotic regions are shown by calculating Lyapunov exponents and Lyapunov dimension.

  3. Pattern Matching of Harmonic Vibrations in Nonlinearly Generated Acoustic Modes in Bovine Bone Samples

    Science.gov (United States)

    Alippi, A.; Biagioni, A.; Germano, M.; Passeri, D.

    2008-06-01

    Local probing of nonlinear generation of harmonic vibrations has been done on bone plate samples and the evaluation of the nonlinear term is derived from a limited number of cases of bovine thigh bones, that shows that a low level of nonlinearity is present in bone structures. This is consistent with the assumption that in low level nonlinear samples the distribution of harmonic vibrations matches the corresponding power distribution of the fundamental mode.

  4. Primarily nonlinear effects observed in a driven asymmetrical vibrating wire

    Science.gov (United States)

    Hanson, Roger J.; Macomber, H. Kent; Morrison, Andrew C.; Boucher, Matthew A.

    2005-01-01

    The purpose of the work reported here is to further experimentally explore the wide variety of behaviors exhibited by driven vibrating wires, primarily in the nonlinear regime. When the wire is driven near a resonant frequency, it is found that most such behaviors are significantly affected by the splitting of the resonant frequency and by the existence of a ``characteristic'' axis associated with each split frequency. It is shown that frequency splitting decreases with increasing wire tension and can be altered by twisting. Two methods are described for determining the orientation of characteristic axes. Evidence is provided, with a possible explanation, that each axis has the same orientation everywhere along the wire. Frequency response data exhibiting nonlinear generation of transverse motion perpendicular to the driving direction, hysteresis, linear generation of perpendicular motion (sometimes tubular), and generation of motion at harmonics of the driving frequency are exhibited and discussed. Also reported under seemingly unchanging conditions are abrupt large changes in the harmonic content of the motion that sometimes involve large subharmonics and harmonics thereof. Slow transitions from one stable state of vibration to another and quasiperiodic motions are also exhibited. Possible musical significance is discussed. .

  5. On the nonlinear models of the vibrating string

    Science.gov (United States)

    Watzky, Alexandre

    2005-09-01

    Vibrations of strings (threads, wires, cables...) are of great interest because of their various domains of application. In musical acoustics, phenomena which could have been neglected elsewhere take a particular importance since perception, which is very sensitive to nonlinear effects, is involved. Some phenomena can also be emphasized when a string is coupled to a sound-radiating structure. Reliable physical models are thus necessary to account for these phenomena, and to understand the true behavior of a vibrating string. Despite the fact that the first nonlinear models were published more than one century ago, and that accurate equations of motion can be naturally achieved within a finite displacement continuum mechanics framework, general models never received the attention they deserved, most authors focusing on particular phenomena and often settling on approximate models. This can be explained by the awkward multiplicity of the involved phenomena. The aim of this presentation is to discuss the consequences of some common assumptions and the true nature of some observed couplings. Particular attention will be paid to the preponderance of the spatial shape of the modes, which are usually underestimated with respect to their temporal form.

  6. 吸振器底座对减振效果的影响研究%Influence of the base of vibration absorber on vibration attenuation effect

    Institute of Scientific and Technical Information of China (English)

    徐振邦; 吴清文

    2014-01-01

    When the vibration absorber is applied to attenuate the vibration of flexible structures,the influence caused by the base of the vibration absorber cannot be ignored.In order to understand the characteristics of the influence, a mathematical model of the system composed of the vibration absorber with the base and a clamped-clamped beam was established.With the model,the vibration attenuation effects of the vibration absorbers were analysed by using the target criterion of power flow and vibration magnitude.The performances caused by the location,size,mass and the number of connection points were investigated emphatically.The results show that the vibration attenuation effect and the effective frequency range of the vibration absorber can be improved by optimizing the base.%吸振器用于柔性结构的振动控制时,其底座的影响将不可忽略。为进一步了解底座影响的程度和特点,开展了相关研究。通过子结构导纳综合法建立了柔性主系统和有底座吸振器耦合的动力学模型,以系统中的净功率流和振幅为考核指标,进行了仿真研究。重点考察了底座安装位置、尺寸、质量以及底座安装点个数对减振效果的影响。研究结果表明:通过合理优化底座参数,能够有效拓展吸振器的减振带宽,进一步改善吸振器减振效果。

  7. Optimal design of vibration absorber using minimax criterion with simplified constraints

    Institute of Scientific and Technical Information of China (English)

    Jie Fang; Shi-Min Wang; Qi Wang

    2012-01-01

    In this paper,a minimax design of damped dynamic vibration absorber for a damped primary system is investigated to minimize the vibration magnitude peaks.Moreover,to reduce the sensitivity of the primary system response to variations of the forcing frequency for a twodegree-of-freedom system,the primary system should have two equal resonance magnitude peaks.To meet this requirement,a set of simplified constraint equations including distribution characteristics of the resonant frequencies of the primary system is established for the minimax objective function.The modified constraint equations have less unknown variables than those by other authors,which not only simplifies the computation but also improves the accuracy of the optimal values.The advantage of the proposed method is illustrated through numerical simulations.

  8. Multi-objective optimal design of active vibration absorber with delayed feedback

    Science.gov (United States)

    Huan, Rong-Hua; Chen, Long-Xiang; Sun, Jian-Qiao

    2015-03-01

    In this paper, a multi-objective optimal design of delayed feedback control of an actively tuned vibration absorber for a stochastically excited linear structure is investigated. The simple cell mapping (SCM) method is used to obtain solutions of the multi-objective optimization problem (MOP). The continuous time approximation (CTA) method is applied to analyze the delayed system. Stability is imposed as a constraint for MOP. Three conflicting objective functions including the peak frequency response, vibration energy of primary structure and control effort are considered. The Pareto set and Pareto front for the optimal feedback control design are presented for two examples. Numerical results have found that the Pareto optimal solutions provide effective delayed feedback control design.

  9. Active vibration absorber for the CSI evolutionary model - Design and experimental results. [Controls Structures Interaction

    Science.gov (United States)

    Bruner, Anne M.; Belvin, W. Keith; Horta, Lucas G.; Juang, Jer-Nan

    1991-01-01

    The development of control of large flexible structures technology must include practical demonstrations to aid in the understanding and characterization of controlled structures in space. To support this effort, a testbed facility has been developed to study practical implementation of new control technologies under realistic conditions. The paper discusses the design of a second order, acceleration feedback controller which acts as an active vibration absorber. This controller provides guaranteed stability margins for collocated sensor/actuator pairs in the absence of sensor/actuator dynamics and computational time delay. Experimental results in the presence of these factors are presented and discussed. The robustness of this design under model uncertainty is demonstrated.

  10. Effects of Structural Parameters on the Dynamics of a Beam Structure with a Beam-Type Vibration Absorber

    Directory of Open Access Journals (Sweden)

    Mothanna Y. Abd

    2012-01-01

    Full Text Available A beam-type absorber has been known as one of the dynamic vibration absorbers used to suppress excessive vibration of an engineering structure. This paper studies an absorbing beam which is attached through a visco-elastic layer on a primary beam structure. Solutions of the dynamic response are presented at the midspan of the primary and absorbing beams in simply supported edges subjected to a stationary harmonic load. The effect of structural parameters, namely, rigidity ratio, mass ratio, and damping of the layer and the structure as well as the layer stiffness on the response is investigated to reduce the vibration amplitude at the fundamental frequency of the original single primary beam. It is found that this can considerably reduce the amplitude at the corresponding troublesome frequency, but compromised situation should be noted by controlling the structural parameters. The model is also validated with measured data with reasonable agreement.

  11. Buck-boost converter for simultaneous semi-active vibration control and energy harvesting for electromagnetic regenerative shock absorber

    Science.gov (United States)

    Li, Peng; Zhang, Chongxiao; Kim, Junyoung; Yu, Liangyao; Zuo, Lei

    2014-04-01

    Regenerative semi-active suspensions can capture the previously dissipated vibration energy and convert it to usable electrical energy for powering on-board electronic devices, while achieve both the better ride comfort and improved road handling performance at the same time when certain control is applied. To achieve this objective, the power electronics interface circuit connecting the energy harvester and the electrical loads, which can perform simultaneous vibration control and energy harvesting function is in need. This paper utilized a buck-boost converter for simultaneous semi-active vibration control and energy harvesting with electromagnetic regenerative shock absorber, which utilizes a rotational generator to converter the vibration energy to electricity. It has been found that when the circuit works in discontinuous current mode (DCM), the ratio between the input voltage and current is only related to the duty cycle of the switch pulse width modulation signal. Using this property, the buck-boost converter can be used to perform semi-active vibration control by controlling the load connected between the terminals of the generator in the electromagnetic shock absorber. While performing the vibration control, the circuit always draw current from the shock absorber and the suspension remain dissipative, and the shock absorber takes no additional energy to perform the vibration control. The working principle and dynamics of the circuit has been analyzed and simulations were performed to validate the concept.

  12. SOME PROBLEMS CONCERNING FREE NON-LINEAR VIBRATIONS OF BEAM STRUCTURES

    Directory of Open Access Journals (Sweden)

    S. V. Bosakov

    2008-01-01

    Full Text Available The paper analyzes an influence of physical non-linearity material account on vibrations of single beams with various support fixing. The authors also analyze power criteria for existing stable periodic vibrations and dependence of vibration period on initial power is determined in the paper. Accurate values of an amplitude and non-linear bending vibration period of beams have been also determined as a conservative system with due account of initial conditions. A number of examples are given that clearly illustrate the obtained solutions and show an influence rate of the mentioned effects on amplitude-frequency characteristics of non-linear systems. 

  13. Optimal semi-active vibration absorber for harmonic excitation based on controlled semi-active damper

    Science.gov (United States)

    Weber, F.

    2014-09-01

    The semi-active vibration absorber (SVA) based on controlled semi-active damper is formulated to realize the behaviour of the passive undamped vibration absorber tuned to the actual harmonic disturbing frequency. It is shown that the controlled stiffness force, which is emulated by the semi-active damper to realize the precise real-time frequency tuning of the SVA, is unpreventably combined with the generation of undesirable damping in the semi-active damper whereby the SVA does not behave as targeted. The semi-active stiffness force is therefore optimized for minimum primary structure response. The results point out that the optimal semi-active stiffness force reduces the undesirable energy dissipation in the SVA at the expenses of slight imprecise frequency tuning. Based on these findings, a real-time applicable suboptimal SVA is formulated that also takes the relative motion constraint of real mass dampers into account. The results demonstrate that the performance of the suboptimal SVA is closer to that of the active solution than that of the passive mass damper.

  14. Waveguides with Absorbing Boundaries: Nonlinearity Controlled by an Exceptional Point and Solitons

    Science.gov (United States)

    Midya, Bikashkali; Konotop, Vladimir V.

    2017-07-01

    We reveal the existence of continuous families of guided single-mode solitons in planar waveguides with weakly nonlinear active core and absorbing boundaries. Stable propagation of TE and TM-polarized solitons is accompanied by attenuation of all other modes, i.e., the waveguide features properties of conservative and dissipative systems. If the linear spectrum of the waveguide possesses exceptional points, which occurs in the case of TM polarization, an originally focusing (defocusing) material nonlinearity may become effectively defocusing (focusing). This occurs due to the geometric phase of the carried eigenmode when the surface impedance encircles the exceptional point. In its turn, the change of the effective nonlinearity ensures the existence of dark (bright) solitons in spite of focusing (defocusing) Kerr nonlinearity of the core. The existence of an exceptional point can also result in anomalous enhancement of the effective nonlinearity. In terms of practical applications, the nonlinearity of the reported waveguide can be manipulated by controlling the properties of the absorbing cladding.

  15. Molecular Histopathology by Spectrally Reconstructed Nonlinear Interferometric Vibrational Imaging

    Science.gov (United States)

    Chowdary, Praveen D.; Jiang, Zhi; Chaney, Eric J.; Benalcazar, Wladimir A.; Marks, Daniel L.; Gruebele, Martin; Boppart, Stephen A.

    2011-01-01

    Sensitive assays for rapid quantitative analysis of histologic sections, resected tissue specimens, or in situ tissue are highly desired for early disease diagnosis. Stained histopathology is the gold standard but remains a subjective practice on processed tissue taking from hours to days. We describe a microscopy technique that obtains a sensitive and accurate color-coded image from intrinsic molecular markers. Spectrally reconstructed nonlinear interferometric vibrational imaging can differentiate cancer versus normal tissue sections with greater than 99% confidence interval in a preclinical rat breast cancer model and define cancer boundaries to ±100 μm with greater than 99% confidence interval, using fresh unstained tissue sections imaged in less than 5 minutes. By optimizing optical sources and beam delivery, this technique can potentially enable real-time point-of-care optical molecular imaging and diagnosis. PMID:21098699

  16. Nonlinear vibrational spectroscopy of surfactants at liquid interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, Paulo B. [Univ. of California, Berkeley, CA (United States)

    1998-12-14

    Surfactants are widely used to modify physical and chemical properties of interfaces. They play an important role in many technological problems. Surfactant monolayer are also of great scientific interest because they are two-dimensional systems that may exhibit a very rich phase transition behavior and can also be considered as a model system for biological interfaces. In this Thesis, we use a second-order nonlinear optical technique (Sum-Frequency Generation - SFG) to obtain vibrational spectra of surfactant monolayer at Iiquidhapor and solid/liquid interfaces. The technique has several advantages: it is intrinsically surface-specific, can be applied to buried interfaces, has submonolayer sensitivity and is remarkably sensitive to the confirmational order of surfactant monolayers.

  17. Nonlinear analysis on the coupling process of electromagnetic vibrator and earth

    Institute of Scientific and Technical Information of China (English)

    CHEN; Zubin; TENG; Jiwen; LIN; Jun; ZHANG; Linhang; JIANG

    2005-01-01

    The linear model based on the hydraulic pressure vibrator has been no longer adaptable to the electromagnetic vibrator. In order to realize the effective transmission of the limited energy from the vibrator to the ground, it is important to study the coupling model of the electromagnetic vibrator and the earth. In this paper, a nonlinear restore term was introduced to the coupling model because of the existence of a large amount of harmonics in the vibrator baseplate. The nonlinear vibration analysis was applied to the model by the multiscale method. In the course of energy transmission from the vibrator to the ground, ultraharmonic resonance was used to explain the generation of harmonics. An improved scheme was advanced to select the cross correlation reference signal in the vibrator seismic exploration. Good application results were obtained in field experiments.

  18. When things go crunch: Gap length effects on a magnetorheological tunable vibration absorber

    Science.gov (United States)

    Albanese, Anne-Marie; Cunefare, Kenneth

    2003-04-01

    A tunable vibration absorber (TVA), where the tunable element is a magneto-rheological (MR) elastomer spring, has demonstrated up to a 460% change on tuning frequency. A frequency increase is associated with a significant decrease in the springs static equilibrium length, referred hereto as a crunch. The crunch is caused by magnetic attractive forces across the spring. The spring, an iron-doped silicone gel, is placed between two halves of a low-carbon steel loop. One loop half behaves as an absorber mass, and has approximately 200 turns of magnet wire around it. Driving current through this wire generates a magnetic flux around the steel path and through the MR spring. Beyond a threshold, the magnetic field induces a large frequency shift in the absorber, with a crunch observed across the elastomer. The crunch can occur when the static equilibrium length is unconstrained by geometry, thus a magnetic attractive force shortens the spring length. The relationship between the magnitude of the crunch and the frequency shift will be presented. Additionally, the impact of different initial MR spring lengths on the frequency behavior will be considered. Finally, the frequency variability achievable by MR-spring-based TVAs with and without the crunch will be assessed.

  19. Designing a hand rest tremor dynamic vibration absorber using H{sub 2} optimization method

    Energy Technology Data Exchange (ETDEWEB)

    Rahnavard, Mostafa; Dizaji, Ahmad F. [Tehran University, Tehran (Iran, Islamic Republic of); Hashemi, Mojtaba [Amirkabir University, Tehran (Iran, Islamic Republic of); Faramand, Farzam [Sharif University, Tehran (Iran, Islamic Republic of)

    2014-05-15

    An optimal single DOF dynamic absorber is presented. A tremor has a random nature and then the system is subjected to a random excitation instead of a sinusoidal one; so the H{sub 2} optimization criterion is probably more desirable than the popular H{sub ∞} optimization method and was implemented in this research. The objective of H{sub 2} optimization criterion is to reduce the total vibration energy of the system for overall frequencies. An objective function, considering the elbow joint angle, θ {sub 2}, tremor suppression as the main goal, was selected. The optimization was done by minimization of this objective function. The optimal system, including the absorber, performance was analyzed in both time and frequency domains. Implementing the optimal absorber, the frequency response amplitude of θ{sub 2} was reduced by more than 98% and 80% at the first and second natural frequencies of the primary system, respectively. A reduction of more than 94% and 78%, was observed for the shoulder joint angle, θ{sub 1}. The objective function also decreased by more than 46%. Then, two types of random inputs were considered. For the first type, θ{sub 1} and θ {sub 2} revealed 60% and 39% reduction in their rms values, whereas for the second type, 33% and 50% decrease was observed.

  20. Non-linear analysis of vibrations of irregular plates

    Science.gov (United States)

    Lobitz, D. W.; Nayfeh, A. H.; Mook, D. T.

    1977-01-01

    A numerical perturbation method is used to investigate the forced vibrations of irregular plates. Nonlinear terms associated with the midplane stretching are retained in the analysis. The numerical part of the method involves the use of linear, finite element techniques to determine the free oscillation mode shapes and frequencies and to obtain the linear midplane stress resultants caused by the midplane stretching. Representing the solution as an expansion in terms of these linear mode shapes, these modes and the resultants are used to determine the equations governing the time-dependent coefficients of this expansion. These equations are solved by using the method of multiple scales. Specific solutions are given for the main-resonant vibrations of an elliptical plate in the presence of internal resonances. The results indicate that modes other than the driven mode can be drawn into the steady state response. Though the excitation is composed of a single harmonic, the response may not be periodic. Moreover, the particular types of responses that can occur are highly dependent on the mode being excited and are sensitive to small geometrical changes.

  1. Nonlinear Vibrations of Multiwalled Carbon Nanotubes under Various Boundary Conditions

    Directory of Open Access Journals (Sweden)

    Hossein Aminikhah

    2011-01-01

    Full Text Available The present work deals with applying the homotopy perturbation method to the problem of the nonlinear oscillations of multiwalled carbon nanotubes embedded in an elastic medium under various boundary conditions. A multiple-beam model is utilized in which the governing equations of each layer are coupled with those of its adjacent ones via the van der Waals interlayer forces. The amplitude-frequency curves for large-amplitude vibrations of single-walled, double-walled, and triple-walled carbon nanotubes are obtained. The influences of some commonly used boundary conditions, changes in material constant of the surrounding elastic medium, and variations of the nanotubes geometrical parameters on the vibration characteristics of multiwalled carbon nanotubes are discussed. The comparison of the generated results with those from the open literature illustrates that the solutions obtained are of very high accuracy and clarifies the capability and the simplicity of the present method. It is worthwhile to say that the results generated are new and can be served as a benchmark for future works.

  2. A 3D printed electromagnetic nonlinear vibration energy harvester

    Science.gov (United States)

    Constantinou, P.; Roy, S.

    2016-09-01

    A 3D printed electromagnetic vibration energy harvester is presented. The motion of the device is in-plane with the excitation vibrations, and this is enabled through the exploitation of a leaf isosceles trapezoidal flexural pivot topology. This topology is ideally suited for systems requiring restricted out-of-plane motion and benefits from being fabricated monolithically. This is achieved by 3D printing the topology with materials having a low flexural modulus. The presented system has a nonlinear softening spring response, as a result of designed magnetic force interactions. A discussion of fatigue performance is presented and it is suggested that whilst fabricating, the raster of the suspension element is printed perpendicular to the flexural direction and that the experienced stress is as low as possible during operation, to ensure longevity. A demonstrated power of ˜25 μW at 0.1 g is achieved and 2.9 mW is demonstrated at 1 g. The corresponding bandwidths reach up-to 4.5 Hz. The system’s corresponding power density of ˜0.48 mW cm-3 and normalised power integral density of 11.9 kg m-3 (at 1 g) are comparable to other in-plane systems found in the literature.

  3. A method for regulating strong nonlinear vibration energy of the flexible arm

    OpenAIRE

    Yushu Bian; Ming Wang; Zhihui Gao; Baofeng Yuan; Ming Fan

    2015-01-01

    For an oscillating system, large amplitude indicates strong vibration energy. In this article, modal interaction is used as a useful means to regulate strong nonlinear vibration energy of the flexible arm undergoing rigid motion. A method is put forward to migrate and dissipate vibration energy based on modal interaction. By means of multiple-scale perturbation analysis, it is proven that internal resonance can be successfully established between modes of the flexible arm and the vibration ab...

  4. Excitation Forces on Point Absorbers Exposed to High Order Non-linear Waves

    DEFF Research Database (Denmark)

    Viuff, Thomas Hansen; Andersen, Morten Thøtt; Kramer, Morten

    2013-01-01

    of proper methods to calculate design pressure distributions has led to structural failures such as buckling in the shells in wave energy prototypes. As a step towards understanding the complex loading from high order non-linear waves, this paper presents a practical approach to estimate wave excitation...... forces accounting for both non-linearity and diffraction effects. The method is validated by laboratory experiments using a hemispherical point absorber with a 6-axis force transducer, but the technique is believed to be applicable for most types of submerged or semi-submerged floating devices...

  5. Application of HPEM to investigate the response and stability of nonlinear problems in vibration

    DEFF Research Database (Denmark)

    Mohammadi, M.H.; Mohammadi, A.; Kimiaeifar, A.;

    2010-01-01

    In this work, a powerful analytical method, called He's Parameter Expanding Methods (HPEM) is used to obtain the exact solution of nonlinear problems in nonlinear vibration. In this work, the governing equation is obtained by using Lagrange method, then the nonlinear governing equation is solved...... and convenient for solving these problems....

  6. The characters of nonlinear vibration in the two-dimensional discrete monoatomic lattice

    Institute of Scientific and Technical Information of China (English)

    XU Quan; TIAN Qiang

    2005-01-01

    The two-dimensional discrete monoatomic lattice is analyzed. Taking nearest-neighbor interaction into account, the characters of the nonlinear vibration in two-dimensional discrete monoatomic lattice are described by the two-dimensional cubic nonlinear Schrodinger equation. Considering the quartic nonlinear potential, the two-dimensional discrete-soliton trains and the solutions perturbed by the neck mode are presented.

  7. Delayed resonator with acceleration feedback - Complete stability analysis by spectral methods and vibration absorber design

    Science.gov (United States)

    Vyhlídal, Tomáš; Olgac, Nejat; Kučera, Vladimír

    2014-12-01

    This paper deals with the problem of active vibration suppression using the concept of delayed resonator (DR) absorber with acceleration feedback. A complete dynamic analysis of DR and its coupling with a single degree of freedom mechanical system are performed. Due to the presence of a delay in the acceleration feedback, the dynamics of the resonator itself, as well as the dynamics of combined system are of ‘neutral' character. On this system, spectral methods are applied to perform a complete stability analysis. Particularly, the method of cluster treatment of characteristic roots is used to determine stability boundaries in the space of the resonator parameters. Based on this analysis, a methodology to select the resonator parameters is proposed in order to guarantee desirable suppression characteristics and to provide safe stability margins. An example case study is included to demonstrate these analytical results.

  8. Parameters Optimization for a Kind of Dynamic Vibration Absorber with Negative Stiffness

    Directory of Open Access Journals (Sweden)

    Yongjun Shen

    2016-01-01

    Full Text Available A new type of dynamic vibration absorber (DVA with negative stiffness is studied in detail. At first, the analytical solution of the system is obtained based on the established differential motion equation. Three fixed points are found in the amplitude-frequency curves of the primary system. The design formulae for the optimum tuning ratio and optimum stiffness ratio of DVA are obtained by adjusting the three fixed points to the same height according to the fixed-point theory. Then, the optimum damping ratio is formulated by minimizing the maximum value of the amplitude-frequency curves according to H∞ optimization principle. According to the characteristics of negative stiffness element, the optimum negative stiffness ratio is also established and it could still keep the system stable. In the end, the comparison between the analytical and the numerical solutions verifies the correctness of the analytical solution. The comparisons with three other traditional DVAs under the harmonic and random excitations show that the presented DVA performs better in vibration absorption. This result could provide theoretical basis for optimum parameters design of similar DVAs.

  9. Nonlinear Interferometric Vibrational Imaging (NIVI) with Novel Optical Sources

    Science.gov (United States)

    Boppart, Stephen A.; King, Matthew D.; Liu, Yuan; Tu, Haohua; Gruebele, Martin

    Optical imaging is essential in medicine and in fundamental studies of biological systems. Although many existing imaging modalities can supply valuable information, not all are capable of label-free imaging with high-contrast and molecular specificity. The application of molecular or nanoparticle contrast agents may adversely influence the biological system under investigation. These substances also present ongoing concerns over toxicity or particle clearance, which must be properly addressed before their approval for in vivo human imaging. Hence there is an increasing appreciation for label-free imaging techniques. It is of primary importance to develop imaging techniques that can indiscriminately identify and quantify biochemical compositions to high degrees of sensitivity and specificity through only the intrinsic optical response of endogenous molecular species. The development and use of nonlinear interferometric vibrational imaging, which is based on the interferometric detection of optical signals from coherent anti-Stokes Raman scattering (CARS), along with novel optical sources, offers the potential for label-free molecular imaging.

  10. Shock reliability enhancement for MEMS vibration energy harvesters with nonlinear air damping as a soft stopper

    Science.gov (United States)

    Chen, Shao-Tuan; Du, Sijun; Arroyo, Emmanuelle; Jia, Yu; Seshia, Ashwin

    2017-10-01

    This paper presents a novel application of utilising nonlinear air damping as a soft mechanical stopper to increase the shock reliability for microelectromechanical systems (MEMS) vibration energy harvesters. The theoretical framework for nonlinear air damping is constructed for MEMS vibration energy harvesters operating in different air pressure levels, and characterisation experiments are conducted to establish the relationship between air pressure and nonlinear air damping coefficient for rectangular cantilever MEMS micro cantilevers with different proof masses. Design guidelines on choosing the optimal air pressure level for different MEMS vibration energy harvesters based on the trade-off between harvestable energy and the device robustness are presented, and random excitation experiments are performed to verify the robustness of MEMS vibration energy harvesters with nonlinear air damping as soft stoppers to limit the maximum deflection distance and increase the shock reliability of the device.

  11. Ultrahigh precision nonlinear reflectivity measurement system for saturable absorber mirrors with self-referenced fluence characterization.

    Science.gov (United States)

    Orsila, Lasse; Härkönen, Antti; Hyyti, Janne; Guina, Mircea; Steinmeyer, Günter

    2014-08-01

    Measurement of nonlinear optical reflectivity of saturable absorber devices is discussed. A setup is described that enables absolute accuracy of reflectivity measurements better than 0.3%. A repeatability within 0.02% is shown for saturable absorbers with few-percent modulation depth. The setup incorporates an in situ knife-edge characterization of beam diameters, making absolute reflectivity estimations and determination of saturation fluences significantly more reliable. Additionally, several measures are discussed to substantially improve the reliability of the reflectivity measurements. At its core, the scheme exploits the limits of state-of-the-art digital lock-in technology but also greatly benefits from a fiber-based master-oscillator power-amplifier source, the use of an integrating sphere, and simultaneous comparison with a linear reflectivity standard.

  12. Enhancing the Dynamic Range of Targeted Energy Transfer in Acoustics Using Several Nonlinear Membrane Absorbers

    CERN Document Server

    Bellet, Romain; Côte, Renaud; Mattei, Pierre-Olivier

    2014-01-01

    In order to enhance the robustness and the energy range of efficiency of targeted energy transfer (TET) phenomena in acoustics, we discuss in this paper about the use of multiple nonlinear membrane absorbers in parallel. We show this way, mainly thanks to an experimental set-up with two membranes, that the different absorbers have additional effects that extend the efficiency and the possibilities of observation of TET. More precisely, we present the different behavior of the system under sinusoidal forcing and free oscillations, characterizing the phenomena for all input energies. The frequency responses are also presented, showing successive clipping of the original resonance peak of the system. A model is finally used to generalize these results to more than two NES and to simulate the case of several very similar membranes in parallel which shows how to extend the existence zone of TET.

  13. Reduction of sound transmission into a circular cylindrical shell using distributed vibration absorbers and Helmholtz resonators

    Science.gov (United States)

    Estève, Simon J.; Johnson, Marty E.

    2002-12-01

    A modal expansion method is used to model a cylindrical enclosure excited by an external plane wave. A set of distributed vibration absorbers (DVAs) and Helmholtz resonators (HRs) are applied to the structure to control the interior acoustic levels. Using an impedance matching method, the structure, the acoustic cavity, and the noise reduction devices are fully coupled to yield an analytical formulation of the structural kinetic energy and acoustic potential energy of a treated cylindrical cavity. Lightweight DVAs and small HRs tuned to the natural frequencies of the targeted structural and acoustic modes, respectively, result in significant acoustic and structural attenuation when the devices are optimally damped. Simulations show that significant interior noise reduction can only be achieved by adding damping to both structural and acoustic modes, which are resonant in the frequency bandwidth of interest. In order to be independent of the azimuth angle of the excitation and to avoid unwanted modal interactions, the devices are distributed evenly around the cylinder in rings. This treatment can only achieve good performance if the structure and the acoustic cavity are lightly damped.

  14. A study on the quintic nonlinear beam vibrations using asymptotic approximate approaches

    Science.gov (United States)

    Sedighi, Hamid M.; Shirazi, Kourosh H.; Attarzadeh, Mohammad A.

    2013-10-01

    This paper intends to promote the application of modern analytical approaches to the governing equation of transversely vibrating quintic nonlinear beams. Four new studied methods are Stiffness analytical approximation method, Homotopy Perturbation Method with an Auxiliary Term, Max-Min Approach (MMA) and Iteration Perturbation Method (IPM). The powerful analytical approaches are used to obtain the nonlinear frequency-amplitude relationship for dynamic behavior of vibrating beams with quintic nonlinearity. It is demonstrated that the first terms in series expansions of all methods are sufficient to obtain a highly accurate solution. Finally, a numerical example is conducted to verify the integrity of the asymptotic methods.

  15. Insulation of nonlinear and random vibrations in the mining industry. [elastodynamic response of rubber insulator

    Science.gov (United States)

    Zeveleanu, C.

    1974-01-01

    The insulation of nonlinear and random vibrations is considered for some ore preparing and sorting implements: rotary crushers, resonance screens, hammer mills, etc. The appearance of subharmonic vibrations is analyzed, and the conditions for their appearance are determined. A method is given for calculating the insulation of these vibrations by means of elastic elements made of rubber. The insulation of the random vibrations produced by Symons crushers is calculated by determining the transmissability and deformation of the insulation system for a narrow band random response.

  16. Theoretical analysis on nonlinear vibration of fluid flow in single-walled carbon nanotube

    Science.gov (United States)

    Valipour, P.; Ghasemi, S. E.; Khosravani, Mohammad Reza; Ganji, D. D.

    2016-09-01

    In this study, the concept of nonlocal continuum theory is used to characterize the nonlinear vibration of an embedded single-walled carbon nanotube. The Pasternak-type model is employed to simulate the interaction of the SWNTs. The parameterized perturbation method is used to solve the corresponding nonlinear differential equation. The effects of the vibration amplitude, flow velocity, nonlocal parameter, and stiffness of the medium on the nonlinear frequency variation are presented. The result shows that by increasing the Winkler constant, the nonlinear frequency decreases, especially for low vibration amplitudes. In addition, it is resulted that influence of the nonlocal parameter is greater at higher flow velocities in comparison with lower flow velocities.

  17. A nonlinear multi-mode wideband piezoelectric vibration-based energy harvester using compliant orthoplanar spring

    Energy Technology Data Exchange (ETDEWEB)

    Dhote, Sharvari, E-mail: sharvari.dhote@mail.utoronto.ca; Zu, Jean; Zhu, Yang [Department of Mechanical and Industrial Engineering, University of Toronto, 5 King' s College Road, Toronto, Ontario M5S-3G8 (Canada)

    2015-04-20

    In this paper, a nonlinear wideband multi-mode piezoelectric vibration-based energy harvester (PVEH) is proposed based on a compliant orthoplanar spring (COPS), which has an advantage of providing multiple vibration modes at relatively low frequencies. The PVEH is made of a tri-leg COPS flexible structure, where three fixed-guided beams are capable of generating strong nonlinear oscillations under certain base excitation. A prototype harvester was fabricated and investigated through both finite-element analysis and experiments. The frequency response shows multiple resonance which corresponds to a hardening type of nonlinear resonance. By adding masses at different locations on the COPS structure, the first three vibration modes are brought close to each other, where the three hardening nonlinear resonances provide a wide bandwidth for the PVEH. The proposed PVEH has enhanced performance of the energy harvester in terms of a wide frequency bandwidth and a high-voltage output under base excitations.

  18. Phonon mechanisms of nonlinear decay and dephasing of mesoscopic vibrational systems

    Science.gov (United States)

    Atalaya, Juan; Kenny, Thomas W.; Dykman, Mark I.

    2015-03-01

    The frequencies and the decay rates of mesoscopic oscillators depend on vibration amplitudes. Nonlinear decay has been seen recently in various nano- and micro-mechanical systems. Here we consider a microscopic mechanism of nonlinear decay, the nonlinear coupling of the vibrational mode of interest, for example, a flexural mode, to other vibrations. Typically, the modes of interest have low eigenfrequencies ω0. Their decay comes from the coupling to acoustic-phonon type vibrations with much higher frequency and density of states. Thus, nonlinear decay requires quartic anharmonic coupling or cubic anharmonicity in the higher order. We find the decay rate for the inverse lifetime of the involved phonons, which is determined by the internal nonlinearity and the boundary scattering, being either much larger or smaller than ω0. The results extend the thermo-elastic, Akhiezer, and Landau-Rumer decay theory to nonlinear decay of mesoscopic modes and make specific predictions on the temperature and frequency dependence of the decay rate for different types of systems. We show that nonlinear decay is invariably accompanied by dephasing. We also show that in nano-electro-mechanical systems the decay rate can be electrostatically controlled.

  19. Nonlinear dynamic behavior of rubbing rotor under interaction between bending and torsional vibrations

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The nonlinear dynamic behavior of a rubbing rotor system was studied with a mathematical model established with the eccentricity and interaction between bending and torsional vibrations taken into consideration.The nonlinear vibrational response of a rubbing rotor was analyzed using numerical integral,spectroscopic analysis and Poince mapping method,which made it possible to have better understanding of the vibrational characteristics of partial rubbing and complete circular rubbing rotors.The numerical results reveal the response of torsional vibration mainly takes a form of suporchronous motion,and its frequency decreases as the rotational speed increases when partial rubbing occurs,and the response of torsional vibration is synchronous when complete circular rubbing occurs.The comparison of the dynamics of rubbing rotors with and without the interaction between bending and torsional vibrations shows the interaction between bending and torsional vibrations advances the rotational speed,at which the response of bending vibration changes from a synchronous motion into a quasi-periodic motion,and the interaction between bending and torsional vibrations reduces stability of the rubbing rotor.

  20. A new vibration absorber based on the hysteresis of multi-configuration NiTiNOL-steel wire ropes assemblies

    Directory of Open Access Journals (Sweden)

    Carboni Biagio

    2014-01-01

    Full Text Available A new vibration absorber based on the restoring forces of NiTiNOL and mixed NiTiNOL-steel wire ropes subject to flexural and coupled tensile-flexural states is presented. The peculiar hysteresis of the device is due to the simultaneous presence of interwire friction and phase tranformations. An extension of the Bouc-Wen model is proposed to fit the experimental force-displacement cycles by employing the Differential Evolutionary optimization algorithm. The genetic-like optimization is carried out both for the constitutive identification and for the design of the vibration absorber. The effectiveness of the device is proved experimentally by a series of shaking table tests on a multi-story scale building.

  1. Nonlinear generalization of Den Hartog's equal-peak method

    Science.gov (United States)

    Habib, G.; Detroux, T.; Viguié, R.; Kerschen, G.

    2015-02-01

    This study addresses the mitigation of a nonlinear resonance of a mechanical system. In view of the narrow bandwidth of the classical linear tuned vibration absorber, a nonlinear absorber, termed the nonlinear tuned vibration absorber (NLTVA), is introduced in this paper. An unconventional aspect of the NLTVA is that the mathematical form of its restoring force is tailored according to the nonlinear restoring force of the primary system. The NLTVA parameters are then determined using a nonlinear generalization of Den Hartog's equal-peak method. The mitigation of the resonant vibrations of a Duffing oscillator is considered to illustrate the proposed developments.

  2. Linear Analysis for Performance of Dual Mass Flywheel with Centrifugal Pendulum Vibration Absorbers System

    Directory of Open Access Journals (Sweden)

    Guangming Zhao

    2013-05-01

    Full Text Available In this study we have offered an investigation of DMF-CPVAs setup for isolating torsional vibration from engine. The simplified mathematical model of DMF-CPVAs setup is built based on the linear theory, the performance of the setup is analyzed, and the result shows that using CPVAs on the DMF leads to an advantage of isolation vibration, instead of just damping vibrations at a specific frequency, could dampen vibrations over a range of frequencies.

  3. Design of Vibration Absorber using Spring and Rubber for Armored Vehicle 5.56 mm Caliber Rifle

    Directory of Open Access Journals (Sweden)

    Aditya Sukma Nugraha

    2014-12-01

    Full Text Available This paper presents a design of vibration absorber using spring and rubber for 5.56 mm caliber rifle armored vehicle. Such a rifle is used in a Remote-Controlled Weapon System (RCWS or a turret where it is fixed using a two degree of freedom pan-tilt mechanism. A half car lumped mass dynamic model of armored vehicles was derived. Numerical simulation was conducted using fourth order Runge Kutta method. Various types of vibration absorbers using spring and rubber with different configurations are installed in the elevation element. Vibration effects on horizontal direction, vertical direction and angular deviation of the elevation element was investigated. Three modes of fire were applied i.e. single fire, semi-automatic fire and automatic fire. From simulation results, it was concluded that the parallel configuration of damping rubber type 3, which has stiffness of 980,356.04 (N/m2 and damping coefficient of 107.37 (N.s/m, and Carbon steel spring whose stiffness coefficient is 5.547 x 106 (N/m2 provides the best vibration absorption. 

  4. Method of Green’s function of nonlinear vibration of corrugated shallow shells

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Based on the dynamic equations of nonlinear large deflection of axisymmetric shallow shells of revolution, the nonlinear free vibration and forced vibration of a corrugated shallow shell under concentrated load acting at the center have been investigated. The nonlinear partial differential equations of shallow shell were re-duced to the nonlinear integral-differential equations by using the method of Green’s function. To solve the integral-differential equations, the expansion method was used to obtain Green’s function. Then the integral-differential equations were reduced to the form with a degenerate core by expanding Green’s function as a series of characteristic function. Therefore, the integral-differential equations be-came nonlinear ordinary differential equations with regard to time. The ampli-tude-frequency relation, with respect to the natural frequency of the lowest order and the amplitude-frequency response under harmonic force, were obtained by considering single mode vibration. As a numerical example, nonlinear free and forced vibration phenomena of shallow spherical shells with sinusoidal corrugation were studied. The obtained solutions are available for reference to the design of corrugated shells.

  5. Method of Green's function of nonlinear vibration of corrugated shallow shells

    Institute of Scientific and Technical Information of China (English)

    YUAN Hong

    2008-01-01

    Based on the dynamic equations of nonlinear large deflection of axisymmetric shallow shells of revolution,the nonlinear free vibration and forced vibration of a corrugated shallow shell under concentrated load acting at the center have been investigated.The nonlinear partial differential equations of shallow shell were re-duced to the nonlinear integral-differential equations by using the method of Green's function.To solve the integral-differential equations,the expansion method was used to obtain Green's function.Then the integral-differential equations were reduced to the form with a degenerate core by expanding Green's function as a series of characteristic function.Therefore,the integral-differential equations be-came nonlinear ordinary differential equations with regard to time.The ampli-tude-frequency relation,with respect to the natural frequency of the lowest order and the amplitude-frequency response under harmonic force,were obtained by considering single mode vibration.As a numerical example,nonlinear free and forced vibration phenomena of shallow spherical shells with sinusoidal corrugation were studied.The obtained solutions are available for reference to the design of corrugated shells.

  6. The Axial Nonlinear Vibration Analysis of Ball-screw about Machine Tool Feeding System

    Institute of Scientific and Technical Information of China (English)

    ZENG Hao-ran; LIU Nian-cong; YANG Jia-rui; CHEN Jian-long; GENG Wei-tao

    2016-01-01

    The forced state of the ball⁃screw of machine tool feeding system is analyzed. The ball⁃screw is simplified as Timoshenko beam and the differential equation of motion for the ball⁃screw is built. To obtain the axial vibration equation, the differential equation of motion is simplified using the assumed mode method. Axial vibration equation is in form of Duffing equation and has the characteristics of nonlinearity. The numerical simulation of Duffing equation is proceeded by MATLAB/Simulink. The effect of screw length, exciting force and damping coefficient are researched, and the axial vibration phase track diagram and Poincare section are obtained. The stability and period of the axial vibration are analyzed. The limit cycle of phase track diagram is enclosed. Axial vibration has two type⁃center singularity distributions on both sides of the origin. The singularity attracts vibration to reach a stable state, and Poincare section shows that axial vibration appears chaotic motion and quasi periodic motion or periodic motion. Singularity position changes with the vibration system parameters, while the distribution doesn′t change. The period of the vibration is enhanced with increasing frequency and damping coefficient. Test of the feeding system ball⁃screw axial vibration exists chaos movement. This paper provides a certain theoretical basis for the dynamic characteristic analysis of machine feeding system ball⁃screw and optimization of structural parameters.

  7. Shear dependent nonlinear vibration in a high quality factor single crystal silicon micromechanical resonator

    Science.gov (United States)

    Zhu, H.; Shan, G. C.; Shek, C. H.; Lee, J. E.-Y.

    2012-07-01

    The frequency response of a single crystal silicon resonator under nonlinear vibration is investigated and related to the shear property of the material. The shear stress-strain relation of bulk silicon is studied using a first-principles approach. By incorporating the calculated shear property into a device-level model, our simulation closely predicts the frequency response of the device obtained by experiments and further captures the nonlinear features. These results indicate that the observed nonlinearity stems from the material's mechanical property. Given the high quality factor (Q) of the device reported here (˜2 × 106), this makes it highly susceptible to such mechanical nonlinear effects.

  8. Analysis of factors influencing fire damage to concrete using nonlinear resonance vibration method

    Energy Technology Data Exchange (ETDEWEB)

    Park, Gang Kyu; Park, Sun Jong; Kwak, Hyo Gyoung [Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology, KAIST, Daejeon (Korea, Republic of); Yim, Hong Jae [Dept. of Construction and Disaster Prevention Engineering, Kyungpook National University, Sangju (Korea, Republic of)

    2015-04-15

    In this study, the effects of different mix proportions and fire scenarios (exposure temperatures and post-fire-curing periods) on fire-damaged concrete were analyzed using a nonlinear resonance vibration method based on nonlinear acoustics. The hysteretic nonlinearity parameter was obtained, which can sensitively reflect the damage level of fire-damaged concrete. In addition, a splitting tensile strength test was performed on each fire-damaged specimen to evaluate the residual property. Using the results, a prediction model for estimating the residual strength of fire-damaged concrete was proposed on the basis of the correlation between the hysteretic nonlinearity parameter and the ratio of splitting tensile strength.

  9. Nonlinear size-dependent longitudinal vibration of carbon nanotubes embedded in an elastic medium

    Science.gov (United States)

    Fernandes, R.; El-Borgi, S.; Mousavi, S. M.; Reddy, J. N.; Mechmoum, A.

    2017-04-01

    In this paper, we study the longitudinal linear and nonlinear free vibration response of a single walled carbon nanotube (CNT) embedded in an elastic medium subjected to different boundary conditions. This formulation is based on a large deformation analysis in which the linear and nonlinear von Kármán strains and their gradient are included in the expression of the strain energy and the velocity and its gradient are taken into account in the expression of the kinetic energy. Therefore, static and kinetic length scales associated with both energies are introduced to model size effects. The governing motion equation along with the boundary conditions are derived using Hamilton's principle. Closed-form solutions for the linear free vibration problem of the embedded CNT rod are first obtained. Then, the nonlinear free vibration response is investigated for various values of length scales using the method of multiple scales.

  10. Nonlinear instability and convection in a vertically vibrated granular bed

    NARCIS (Netherlands)

    Shukla, P.; Ansari, I.H.; van der Meer, Roger M.; Lohse, Detlef; Alam, M.

    2014-01-01

    The nonlinear instability of the density-inverted granular Leidenfrost state and the resulting convective motion in strongly shaken granular matter are analysed via a weakly nonlinear analysis of the hydrodynamic equations. The base state is assumed to be quasi-steady and the effect of harmonic

  11. Vibrations of Nonlinear Systems. The Method of Integral Equations,

    Science.gov (United States)

    Many diverse applied methods of investigating oscillations of nonlinear systems often in different mathematical formulations and outwardly not...parameter classical methods and the methods of investigating nonlinear systems of automatic control based on the so-called filter hypothesis, and to

  12. Nonlinear instability and convection in a vertically vibrated granular bed

    NARCIS (Netherlands)

    Shukla, P.; Ansari, I.H.; Meer, van der R.M.; Lohse, D.; Alam, M.

    2014-01-01

    The nonlinear instability of the density-inverted granular Leidenfrost state and the resulting convective motion in strongly shaken granular matter are analysed via a weakly nonlinear analysis of the hydrodynamic equations. The base state is assumed to be quasi-steady and the effect of harmonic shak

  13. Transverse nonlinear vibrations of a circular spinning disk with a varying rotating speed

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    We analyze the transverse nonlinear vibrations of a rotating flexible disk subjected to a rotating point force with a periodically varying rotating speed. Based on Hamilton’s principle, the nonlinear governing equations of motion (coupled equations among the radial, tangential and transverse displacements) are derived for the rotating flexible disk. When the in-plane inertia is ignored and a stress function is introduced, the three nonlinearly coupled partial differential equations are reduced to two nonlinearly coupled partial differential equations. According to Galerkin’s approach, a four-degree-of-freedom nonlinear system governing the weakly split resonant modes is derived. The resonant case considered here is 1:1:2:2 internal resonance and a critical speed resonance. The primary parametric resonance for the first-order sin and cos modes and the fundamental parametric resonance for the second-order sin and cos modes are also considered. The method of multiple scales is used to obtain a set of eight-dimensional nonlinear averaged equations. Based on the averaged equations, using numerical simulations, the influence of different parameters on the nonlinear vibrations of the spinning disk is detected. It is concluded that there exist complicated nonlinear behaviors including the periodic, period-n and multi-pulse type chaotic motions for the spinning disk with a varying rotating speed. It is also found that among all parameters, the damping and excitation have great influence on the nonlinear responses of the spinning disk with a varying rotating speed.

  14. Research on strip hysteretic behavior and mill vertical vibration system nonlinear dynamics

    Science.gov (United States)

    Fan, Xiaobin; Zang, Yong; Jin, Ke

    2016-10-01

    Rolling mill vibration is a technical problem in the iron and steel industry for many years and has serious impact and harm on production. There were serious vibrations in the middle mills when rolling thin container strip for the compact strip production (CSP) strip hot rolling process. This paper studied the hysteretic characteristic of rolled strip and established the vertical vibration system single-degree-of-freedom dynamics model of the F3 mill rollers. The influence of parameters on the system characteristics was studied, such as the linear damping coefficient, linear stiffness coefficient, nonlinear displacement coefficient, nonlinear velocity coefficient and exciting force, and then, the vibration source and vibration-restraining measure were studied from the roll gap. The results show that with increasing linear stiffness, damping and hysteresis coefficient, it can reduce the possibility of chaotic system; the linear stiffness coefficient had the greatest influence, and hysteresis damping coefficient had minimal influence on chaotic threshold. In order to reduce rolling mill vibration amplitude, we should reduce the external excitation force firstly, and in order to improve the dynamic performance of the system, we should control the speed of nonlinear coefficient values. The contrast experiments were carried out at the production scene finally.

  15. Nonlinear vibration of a hemispherical dome under external water pressure

    Science.gov (United States)

    Ross, C. T. F.; McLennan, A.; Little, A. P. F.

    2011-07-01

    The aim of this study was to analyse the behaviour of a hemi-spherical dome when vibrated under external water pressure, using the commercial computer package ANSYS 11.0. In order to achieve this aim, the dome was modelled and vibrated in air and then in water, before finally being vibrated under external water pressure. The results collected during each of the analyses were compared to the previous studies, and this demonstrated that ANSYS was a suitable program and produced accurate results for this type of analysis, together with excellent graphical displays. The analysis under external water pressure, clearly demonstrated that as external water pressure was increased, the resonant frequencies decreased and a type of dynamic buckling became likely; because the static buckling eigenmode was similar to the vibration eigenmode. ANSYS compared favourably with the in-house software, but had the advantage that it produced graphical displays. This also led to the identification of previously undetected meridional modes of vibration; which were not detected with the in-house software.

  16. Non-linear Vibration of Oscillation Systems using Frequency-Amplitude Formulation

    DEFF Research Database (Denmark)

    Fereidoon, A.; Ghadimi, M.; Barari, Amin

    2012-01-01

    In this paper we study the periodic solutions of free vibration of mechanical systems with third and fifthorder nonlinearity for two examples using He’s Frequency Amplitude Formulation (HFAF).The effectiveness and convenience of the method is illustrated in these examples. It will be shown...... that the solutions obtained with current method have a fabulous conformity with those achieved from time marching solution. HFAF is easy with powerful concepts and the high accuracy, so it can be found widely applicable in vibrations, especially strong nonlinearity oscillatory problems....

  17. Geometrically nonlinear vibration analysis of piezoelectrically actuated FGM plate with an initial large deformation

    Energy Technology Data Exchange (ETDEWEB)

    Naei, Mohammad Hassan; Rastgoo, Abbas [University of Tehran, Tehran (Iran, Islamic Republic of); Ebrahimi, Farzad [Faculty of Engineering and Technology, lmam Khomeini International University, Qazvin (Iran, Islamic Republic of)

    2009-08-15

    A theoretical model for geometrically nonlinear vibration analysis of piezoelectrically actuated circular plates made of functionally grade material (FGM) is presented based on Kirchhoff's-Love hypothesis with von-Karman type geometrical large nonlinear deformations. To determine the initial stress state and pre-vibration deformations of the smart plate a nonlinear static problem is solved followed by adding an incremental dynamic state to the pre-vibration state. The derived governing equations of the structure are solved by exact series expansion method combined with perturbation approach. The material properties of the FGM core plate are assumed to be graded in the thickness direction according to the power-law distribution in terms of the volume fractions of the constituents. Control of the FGM plate's nonlinear deflections and natural frequencies using high control voltages is studied and their nonlinear effects are evaluated. Numerical results for FG plates with various mixture of ceramic and metal are presented in dimensionless forms. In a parametric study the emphasis is placed on investigating the effect of varying the applied actuator voltage as well as gradient index of FGM plate on vibration characteristics of the smart structure

  18. CALCULATIONS OF STRETCHING VIBRATIONAL ENERGYLEVELS OF THE CH3I MOLECULE BY A NONLINEAR MODEL

    Institute of Scientific and Technical Information of China (English)

    ZHU JUN; GOU QING-QUAN

    2001-01-01

    A nonlinear model, i.e. the quantized discrete self-trapping equation, is applied to calculate the highly excited CH stretching vibrational energy levels of the CH3I molecule in the liquid phase at the electronic ground state up to n=8. The obtained results agree well with the experimental data and with those obtained from local mode model calculations. We note that the dominant feature of the methyl CH stretching vibrational energy levels of the CH3I molecule is a pattern of local mode pairs. When n > 7, all the vibrational energy of the CH3 group can nearly be localized on a single CH bond.

  19. NONLINEAR VIBRATION FOR MODERATE THICKNESS RECTANGULAR CRACKED PLATES INCLUDING COUPLED EFFECT OF ELASTIC FOUNDATION

    Institute of Scientific and Technical Information of China (English)

    XIAO Yong-gang; FU Yi-ming; ZHA Xu-dong

    2005-01-01

    Based on Reissner plate theory and Hamilton variational principle, the nonlinear equations of motion were derived for the moderate thickness rectangular plates with transverse surface penetrating crack on the two-parameter foundation. Under the condition of free boundary, a set of trial functions satisfying all boundary conditions and crack's continuous conditions were proposed. By employing the Galerkin method and the harmonic balance method, the nonlinear vibration equations were solved and the nonlinear vibration behaviors of the plate were analyzed. In numerical computation, the effects of the different location and depth of crack, the different structural parameters of plates and the different physical parameters of foundation on the nonlinear amplitude frequency response curves of the plate were discussed.

  20. Estimations of non-linearities in structural vibrations of string musical instruments

    CERN Document Server

    Ege, Kerem; Boutillon, Xavier

    2012-01-01

    Under the excitation of strings, the wooden structure of string instruments is generally assumed to undergo linear vibrations. As an alternative to the direct measurement of the distortion rate at several vibration levels and frequencies, we characterise weak non-linearities by a signal-model approach based on cascade of Hammerstein models. In this approach, in a chain of two non-linear systems, two measurements are sufficient to estimate the non-linear contribution of the second (sub-)system which cannot be directly linearly driven, as a function of the exciting frequency. The experiment consists in exciting the instrument acoustically. The linear and non-linear contributions to the response of (a) the loudspeaker coupled to the room, (b) the instrument can be separated. Some methodological issues will be discussed. Findings pertaining to several instruments - one piano, two guitars, one violin - will be presented.

  1. SEISMIC RANDOM VIBRATION ANALYSIS OF LOCALLY NONLINEAR STRUCTURES

    Institute of Scientific and Technical Information of China (English)

    ZhaoYan; LinJiahao; ZhangYahui; AnWei

    2003-01-01

    A nonlinear seismic analysis method for complex frame structures subjected to stationary random ground excitations is proposed. The nonlinear elasto-plastic behaviors may take place only on a small part of the structure. The Bouc-Wen differential equation model is used to model the hysteretic characteristics of the nonlinear components. The Pseudo Excitation Method (PEM) is used in solving the linearized random differential equations to replace the solution of the less efficient Lyapunov equation. Numerical results of a real bridge show that .the method proposed is effective for practical engineering analysis.

  2. Nonlinear Response of Vibrational Conveyers with Nonideal Vibration Exciter: Superharmonic and Subharmonic Resonance

    Directory of Open Access Journals (Sweden)

    H. Bayıroğlu

    2012-01-01

    Full Text Available Vibrational conveyers with a centrifugal vibration exciter transmit their load based on the jumping method. Common unbalanced-mass driver oscillates the trough. The motion is strictly related to the vibrational parameters. The transition over resonance of a vibratory system, excited by rotating unbalances, is important in terms of the maximum vibrational amplitude produced and the power demand on the drive for the crossover. The mechanical system is driven by the DC motor. In this study, the working ranges of oscillating shaking conveyers with nonideal vibration exciter have been analyzed analytically for superharmonic and subharmonic resonances by the method of multiple scales and numerically. The analytical results obtained in this study agree well with the numerical results.

  3. Control of sound transmission into payload fairings using distributed vibration absorbers and Helmholtz resonators

    Science.gov (United States)

    Esteve, Simon J.

    A new passive treatment to reduce sound transmission into payload fairing at low frequency is investigated. This new solution is composed of optimally damped vibration absorbers (DVA) and optimally damped Helmholtz resonators (HR). A fully coupled structural-acoustic model of a composite cylinder excited by an external plane wave is developed as a first approximation of the system. A modal expansion method is used to describe the behavior of the cylindrical shell and the acoustic cavity; the noise reduction devices are modeled as surface impedances. All the elements are then fully coupled using an impedance matching method. This model is then refined using the digitized mode shapes and natural frequencies obtained from a fairing finite element model. For both models, the noise transmission mechanisms are highlighted and the noise reduction mechanisms are explained. Procedures to design the structural and acoustic absorbers based on single degree of freedom system are modified for the multi-mode framework. The optimization of the overall treatment parameters namely location, tuning frequency, and damping of each device is also investigated using genetic algorithm. Noise reduction of up to 9dB from 50Hz to 160Hz using 4% of the cylinder mass for the DVA and 5% of the cavity volume for the HR can be achieved. The robustness of the treatment performance to changes in the excitation, system and devices characteristics is also addressed. The model is validated by experiments done outdoors on a 10-foot long, 8-foot diameter composite cylinder. The excitation level reached 136dB at the cylinder surface comparable to real launch acoustic environment. With HRs representing 2% of the cylinder volume, the noise transmission from 50Hz to 160Hz is reduced by 3dB and the addition of DVAs representing 6.5% of the cylinder mass enhances this performance to 4.3dB. Using the fairing model, a HR+DVA treatment is designed under flight constraints and is implemented in a real Boeing

  4. Analysis on Forced Vibration of Thin-Wall Cylindrical Shell with Nonlinear Boundary Condition

    Directory of Open Access Journals (Sweden)

    Qiansheng Tang

    2016-01-01

    Full Text Available Forced vibration of thin-wall cylindrical shell under nonlinear boundary condition was discussed in this paper. The nonlinear boundary was modeled as supported clearance in one end of shell and the restraint was assumed as linearly elastic in the radial direction. Based on Sanders’ shell theory, Lagrange equation was utilized to derive the nonlinear governing equations of cylindrical shell. The displacements in three directions were represented by beam functions and trigonometric functions. In the study of nonlinear dynamic responses of thin-wall cylindrical shell with supported clearance under external loads, the Newmark method is used to obtain time history, frequency spectrum plot, phase portraits, Poincare section, bifurcation diagrams, and three-dimensional spectrum plot with different parameters. The effects of external loads, supported clearance, and support stiffness on nonlinear dynamics behaviors of cylindrical shell with nonlinear boundary condition were discussed.

  5. A discrete model for geometrically nonlinear transverse free constrained vibrations of beams with various end conditions

    Science.gov (United States)

    Rahmouni, A.; Beidouri, Z.; Benamar, R.

    2013-09-01

    The purpose of the present paper was the development of a physically discrete model for geometrically nonlinear free transverse constrained vibrations of beams, which may replace, if sufficient degrees of freedom are used, the previously developed continuous nonlinear beam constrained vibration models. The discrete model proposed is an N-Degrees of Freedom (N-dof) system made of N masses placed at the ends of solid bars connected by torsional springs, presenting the beam flexural rigidity. The large transverse displacements of the bar ends induce a variation in their lengths giving rise to axial forces modelled by longitudinal springs. The calculations made allowed application of the semi-analytical model developed previously for nonlinear structural vibration involving three tensors, namely the mass tensor mij, the linear rigidity tensor kij and the nonlinearity tensor bijkl. By application of Hamilton's principle and spectral analysis, the nonlinear vibration problem is reduced to a nonlinear algebraic system, examined for increasing numbers of dof. The results obtained by the physically discrete model showed a good agreement and a quick convergence to the equivalent continuous beam model, for various fixed boundary conditions, for both the linear frequencies and the nonlinear backbone curves, and also for the corresponding mode shapes. The model, validated here for the simply supported and clamped ends, may be used in further works to present the flexural linear and nonlinear constrained vibrations of beams with various types of discontinuities in the mass or in the elasticity distributions. The development of an adequate discrete model including the effect of the axial strains induced by large displacement amplitudes, which is predominant in geometrically nonlinear transverse constrained vibrations of beams [1]. The investigation of the results such a discrete model may lead to in the case of nonlinear free vibrations. The development of the analogy between the

  6. Analysis of Nonlinear Vibration of Hard Coating Thin Plate by Finite Element Iteration Method

    Directory of Open Access Journals (Sweden)

    Hui Li

    2014-01-01

    Full Text Available This paper studies nonlinear vibration mechanism of hard coating thin plate based on macroscopic vibration theory and proposes finite element iteration method (FEIM to theoretically calculate its nature frequency and vibration response. First of all, strain dependent mechanical property of hard coating is briefly introduced and polynomial method is adopted to characterize the storage and loss modulus of coating material. Then, the principle formulas of inherent and dynamic response characteristics of the hard coating composite plate are derived. And consequently specific analysis procedure is proposed by combining ANSYS APDL and self-designed MATLAB program. Finally, a composite plate coated with MgO + Al2O3 is taken as a study object and both nonlinear vibration test and analysis are conducted on the plate specimen with considering strain dependent mechanical parameters of hard coating. Through comparing the resulting frequency and response results, the practicability and reliability of FEIM have been verified and the corresponding analysis results can provide an important reference for further study on nonlinear vibration mechanism of hard coating composite structure.

  7. Nonlinear electroelastic vibration analysis of NEMS consisting of double-viscoelastic nanoplates

    Science.gov (United States)

    Ebrahimy, Farzad; Hosseini, S. Hamed S.

    2016-10-01

    The nonlinear electroelastic vibration behavior of viscoelastic nanoplates is investigated based on nonlocal elasticity theory. Employing nonlinear strain-displacement relations, the geometrical nonlinearity is modeled while governing equations are derived through Hamilton's principle and they are solved applying semi-analytical generalized differential quadrature (GDQ) method. Eringen's nonlocal elasticity theory takes into account the effect of small size, which enables the present model to become effective in the analysis and design of nanosensors and nanoactuators. Based on Kelvin-Voigt model, the influence of the viscoelastic coefficient is also discussed. It is demonstrated that the GDQ method has high precision and computational efficiency in the vibration analysis of viscoelastic nanoplates. The good agreement between the results of this article and those available in literature validated the presented approach. The detailed mathematical derivations are presented and numerical investigations are performed while the emphasis is placed on investigating the effect of the several parameters such as electric voltage, small-scale effects, van der Waals interaction, Winkler and Pasternak elastic coefficients, the viscidity and aspect ratio of the nanoplate on its nonlinear vibrational characteristics. It is explicitly shown that the electroelastic vibration behavior of viscoelastic nanoplates is significantly influenced by these effects. Numerical results are presented to serve as benchmarks for future analyses of viscoelastic nanoplates which are fundamental elements in nanoelectromechanical systems.

  8. Effects of heat exchange and nonlinearity on acoustic streaming in a vibrating cylindrical cavity.

    Science.gov (United States)

    Gubaidullin, Amir A; Yakovenko, Anna V

    2015-06-01

    Acoustic streaming in a gas filled cylindrical cavity subjected to the vibration effect is investigated numerically. Both thermally insulated walls and constant temperature walls are considered. The range of vibration frequencies from low frequencies, at which the process can be described by an approximate analytical solution, to high frequencies giving rise to strong nonlinear effects is studied. Frequencies lower than the resonant one are chosen, and nonlinearity is achieved due to the large amplitude. The problem is solved in an axisymmetric statement. The dependence of acoustic streaming in narrow channels at vibration frequencies lower than the resonant one on the type of thermal boundary conditions is shown. The streaming vortices' directions of rotation in the case of constant temperature walls are found to be opposite to those in the case of thermally insulated walls. Different nonlinear effects, which increase with the frequency of vibration, are obtained. Nonlinear effects manifesting as the nonuniformity of average temperature, pressure, and density are in turn found to be influencing the streaming velocity and streaming structure.

  9. Nonlinear free vibrations of beams in space due to internal resonance

    Science.gov (United States)

    Stoykov, S.; Ribeiro, P.

    2011-08-01

    The geometrically nonlinear free vibrations of beams with rectangular cross section are investigated using a p-version finite element method. The beams may vibrate in space, hence they may experience longitudinal, torsional and non-planar bending deformations. The model is based on Timoshenko's theory for bending and assumes that, under torsion, the cross section rotates as a rigid body and is free to warp in the longitudinal direction, as in Saint-Venant's theory. The geometrical nonlinearity is taken into account by considering Green's nonlinear strain tensor. Isotropic and elastic beams are investigated and generalised Hooke's law is used. The equation of motion is derived by the principle of virtual work. Mostly clamped-clamped beams are investigated, although other boundary conditions are considered for validation purposes. Employing the harmonic balance method, the differential equations of motion are converted into a nonlinear algebraic form and then solved by a continuation method. One constant term, odd and even harmonics are assumed in the Fourier series and convergence with the number of harmonics is analysed. The variation of the amplitude of vibration with the frequency of vibration is determined and presented in the form of backbone curves. Coupling between modes is investigated, internal resonances are found and the ensuing multimodal oscillations are described. Some of the couplings discovered lead from planar oscillations to oscillations in the three dimensional space.

  10. A combined dynamic analysis method for geometrically nonlinear vibration isolators with elastic rings

    Science.gov (United States)

    Hu, Zhan; Zheng, Gangtie

    2016-08-01

    A combined analysis method is developed in the present paper for studying the dynamic properties of a type of geometrically nonlinear vibration isolator, which is composed of push-pull configuration rings. This method combines the geometrically nonlinear theory of curved beams and the Harmonic Balance Method to overcome the difficulty in calculating the vibration and vibration transmissibility under large deformations of the ring structure. Using the proposed method, nonlinear dynamic behaviors of this isolator, such as the lock situation due to the coulomb damping and the usual jump resulting from the nonlinear stiffness, can be investigated. Numerical solutions based on the primary harmonic balance are first verified by direct integration results. Then, the whole procedure of this combined analysis method is demonstrated and validated by slowly sinusoidal sweeping experiments with different amplitudes of the base excitation. Both numerical and experimental results indicate that this type of isolator behaves as a hardening spring with increasing amplitude of the base excitation, which makes it suitable for isolating both steady-state vibrations and transient shocks.

  11. Nonlinear Dynamic Behaviors of Rotated Blades with Small Breathing Cracks Based on Vibration Power Flow Analysis

    Directory of Open Access Journals (Sweden)

    Hailong Xu

    2016-01-01

    Full Text Available Rotated blades are key mechanical components in turbomachinery and high cycle fatigues often induce blade cracks. Accurate detection of small cracks in rotated blades is very significant for safety, reliability, and availability. In nature, a breathing crack model is fit for a small crack in a rotated blade rather than other models. However, traditional vibration displacements-based methods are less sensitive to nonlinear characteristics due to small breathing cracks. In order to solve this problem, vibration power flow analysis (VPFA is proposed to analyze nonlinear dynamic behaviors of rotated blades with small breathing cracks in this paper. Firstly, local flexibility due to a crack is derived and then time-varying dynamic model of the rotated blade with a small breathing crack is built. Based on it, the corresponding vibration power flow model is presented. Finally, VPFA-based numerical simulations are done to validate nonlinear behaviors of the cracked blade. The results demonstrate that nonlinear behaviors of a crack can be enhanced by power flow analysis and VPFA is more sensitive to a small breathing crack than displacements-based vibration analysis. Bifurcations will occur due to breathing cracks and subharmonic resonance factors can be defined to identify breathing cracks. Thus the proposed method can provide a promising way for detecting and predicting small breathing cracks in rotated blades.

  12. Experimental Methods to Characterize Nonlinear Vibration of Flapping Wing Micro Air Vehicles

    Science.gov (United States)

    2007-03-01

    the following terminology when referring to flapping wing MAVs; bird flight machines are also known as ornithopters and robotic insects are also...15. SUBJECT TERMS Flapping Wing Micro Air Vehicle, flapping-wing MAV, MAV, ornithopter , entomopter, nonlinear vibration, beam resonance

  13. A finite element-based perturbation method for nonlinear free vibration analysis of composite cylindrical shells

    NARCIS (Netherlands)

    Rahman, T.; Jansen, E.L.; Tiso, P.

    2011-01-01

    In this paper, a finite element-based approach for nonlinear vibration analysis of shell structures is presented. The approach makes use of a perturbation method that gives an approximation for the amplitude-frequency relation of the structure. The method is formulated using a functional notation an

  14. A finite element-based perturbation method for nonlinear free vibration analysis of composite cylindrical shells

    NARCIS (Netherlands)

    Rahman, T.; Jansen, E.L.; Tiso, P.

    2011-01-01

    In this paper, a finite element-based approach for nonlinear vibration analysis of shell structures is presented. The approach makes use of a perturbation method that gives an approximation for the amplitude-frequency relation of the structure. The method is formulated using a functional notation

  15. Non-linear system identification in flow-induced vibration

    Energy Technology Data Exchange (ETDEWEB)

    Spanos, P.D.; Zeldin, B.A. [Rice Univ., Houston, TX (United States); Lu, R. [Hudson Engineering Corp., Houston, TX (United States)

    1996-12-31

    The paper introduces a method of identification of non-linear systems encountered in marine engineering applications. The non-linearity is accounted for by a combination of linear subsystems and known zero-memory non-linear transformations; an equivalent linear multi-input-single-output (MISO) system is developed for the identification problem. The unknown transfer functions of the MISO system are identified by assembling a system of linear equations in the frequency domain. This system is solved by performing the Cholesky decomposition of a related matrix. It is shown that the proposed identification method can be interpreted as a {open_quotes}Gram-Schmidt{close_quotes} type of orthogonal decomposition of the input-output quantities of the equivalent MISO system. A numerical example involving the identification of unknown parameters of flow (ocean wave) induced forces on offshore structures elucidates the applicability of the proposed method.

  16. Nonlinear thickness-stretch vibration of thin-film acoustic wave resonators

    Science.gov (United States)

    Ji, Xiaojun; Fan, Yanping; Han, Tao; Cai, Ping

    2016-03-01

    We perform a theoretical analysis on nonlinear thickness-stretch free vibration of thin-film acoustic wave resonators made from AlN and ZnO. The third-order or cubic nonlinear theory by Tiersten is employed. Using Green's identify, under the usual approximation of neglecting higher time harmonics, a perturbation analysis is performed from which the resonator frequency-amplitude relation is obtained. Numerical calculations are made. The relation can be used to determine the linear operating range of these resonators. It can also be used to compare with future experimental results to determine the relevant thirdand/or fourth-order nonlinear elastic constants.

  17. Application of HPEM to investigate the response and stability of nonlinear problems in vibration

    DEFF Research Database (Denmark)

    Mohammadi, M.H.; Mohammadi, A.; Kimiaeifar, A.

    2010-01-01

    In this work, a powerful analytical method, called He's Parameter Expanding Methods (HPEM) is used to obtain the exact solution of nonlinear problems in nonlinear vibration. In this work, the governing equation is obtained by using Lagrange method, then the nonlinear governing equation is solved...... analytically by He's Parameter Expanding Methods. It is shown that one term in series expansions is sufficient to obtain a highly accurate solution which is valid for the whole domain. Comparison of the obtained solutions with those obtained using numerical method shows that this method is effective...

  18. Enhancement of Optical Adaptive Sensing by Using a Dual-Stage Seesaw-Swivel Actuator with a Tunable Vibration Absorber

    Directory of Open Access Journals (Sweden)

    Po-Chien Chou

    2011-05-01

    Full Text Available Technological obstacles to the use of rotary-type swing arm actuators to actuate optical pickup modules in small-form-factor (SFF disk drives stem from a hinge’s skewed actuation, subsequently inducing off-axis aberrations and deteriorating optical quality. This work describes a dual-stage seesaw-swivel actuator for optical pickup actuation. A triple-layered bimorph bender made of piezoelectric materials (PZTs is connected to the suspension of the pickup head, while the tunable vibration absorber (TVA unit is mounted on the seesaw swing arm to offer a balanced force to reduce vibrations in a focusing direction. Both PZT and TVA are designed to satisfy stable focusing operation operational requirements and compensate for the tilt angle or deformation of a disc. Finally, simulation results verify the performance of the dual-stage seesaw-swivel actuator, along with experimental procedures and parametric design optimization confirming the effectiveness of the proposed system.

  19. Theoretical analysis of linear and nonlinear piezoelectric vibrational energy harvesters for human walking

    Science.gov (United States)

    Eltanany, Ali M.; Yoshimura, Takeshi; Fujimura, Norifumi; Elsayed, Nour Z.; Ebied, Mohamed R.; Ali, Mohamed G. S.

    2015-10-01

    The role of nonlinear stiffness in the performance of the piezoelectric vibrational energy harvester (pVEH) was discussed. Harmonic balance and numerical methods are applied to characterize the electromechanical response of pVEHs based on Duffing oscillator at a deterministic harmonic excitation of fundamental vibration characteristics (2 Hz, 1 m·s-2), which corresponds to human walking. Then, the response to a vibration with two harmonic waves, which has a fixed fundamental frequency (2 Hz, 1 m·s-2) and a frequency varied from 1.5 to 2.5 Hz. The numerical results obtained in this study indicate that nonlinearity does not have a significant advantage on the energy harvesting from human walking.

  20. Control of an extending nonlinear elastic cable with an active vibration control strategy

    Science.gov (United States)

    Dai, L.; Sun, L.; Chen, C.

    2014-10-01

    An active control strategy based on the fuzzy sliding mode control (FSMC) is developed in this research for controlling the large-amplitude vibrations of an extending nonlinear elastic cable. The geometric nonlinearity of the cable and the fixed-fixed boundary of the cable are considered. For effectively and accurately control the motion of the cable with the active control strategy developed, the governing equation of the elastic cable is established and transformed into a multi-dimensional dynamic system with the 3rd order Galerkin method. The active control strategy is developed on the basis of the dynamic system, and the control strategy is applicable to multi-dimensional dynamic systems. In the numerical simulation, large-amplitude vibrations of the cable are effectively controlled with the control strategy. The results of the research demonstrate significances for controlling the cable vibrations of an elevator in practice.

  1. Optimization of Passive and Active Non-Linear Vibration Mounting Systems Based on Vibratory Power Transmission

    Science.gov (United States)

    Royston, T. J.; Singh, R.

    1996-07-01

    While significant non-linear behavior has been observed in many vibration mounting applications, most design studies are typically based on the concept of linear system theory in terms of force or motion transmissibility. In this paper, an improved analytical strategy is presented for the design optimization of complex, active of passive, non-linear mounting systems. This strategy is built upon the computational Galerkin method of weighted residuals, and incorporates order reduction and numerical continuation in an iterative optimization scheme. The overall dynamic characteristics of the mounting system are considered and vibratory power transmission is minimized via adjustment of mount parameters by using both passive and active means. The method is first applied through a computational example case to the optimization of basic passive and active, non-linear isolation configurations. It is found that either active control or intentionally introduced non-linearity can improve the mount's performance; but a combination of both produces the greatest benefit. Next, a novel experimental, active, non-linear isolation system is studied. The effect of non-linearity on vibratory power transmission and active control are assessed via experimental measurements and the enhanced Galerkin method. Results show how harmonic excitation can result in multiharmonic vibratory power transmission. The proposed optimization strategy offers designers some flexibility in utilizing both passive and active means in combination with linear and non-linear components for improved vibration mounts.

  2. Nonlinear vibrations and energy exchange of single-walled carbon nanotubes. Circumferential flexural modes

    Science.gov (United States)

    Strozzi, Matteo; Smirnov, Valeri V.; Manevitch, Leonid I.; Milani, Massimo; Pellicano, Francesco

    2016-10-01

    In this paper, the nonlinear vibrations and energy exchange of single-walled carbon nanotubes (SWNTs) are studied. The Sanders-Koiter theory is applied to model the nonlinear dynamics of the system in the case of finite amplitude of vibration. The SWNT deformation is described in terms of longitudinal, circumferential and radial displacement fields. Simply supported, clamped and free boundary conditions are considered. The circumferential flexural modes (CFMs) are investigated. Two different approaches based on numerical and analytical models are compared. In the numerical model, an energy method based on the Lagrange equations is used to reduce the nonlinear partial differential equations of motion to a set of nonlinear ordinary differential equations, which is solved by using the implicit Runge-Kutta numerical method. In the analytical model, a reduced form of the Sanders-Koiter theory assuming small circumferential and tangential shear deformations is used to get the nonlinear ordinary differential equations of motion, which are solved by using the multiple scales analytical method. The transition from energy beating to energy localization in the nonlinear field is studied. The effect of the aspect ratio on the analytical and numerical values of the nonlinear energy localization threshold for different boundary conditions is investigated. Time evolution of the total energy distribution along the axis of a simply supported SWNT

  3. Porosity-dependent nonlinear forced vibration analysis of functionally graded piezoelectric smart material plates

    Science.gov (United States)

    Qing Wang, Yan; Zu, Jean W.

    2017-10-01

    This work investigates the porosity-dependent nonlinear forced vibrations of functionally graded piezoelectric material (FGPM) plates by using both analytical and numerical methods. The FGPM plates contain porosities owing to the technical issues during the preparation of FGPMs. Two types of porosity distribution, namely, even and uneven distribution, are considered. A modified power law model is adopted to describe the material properties of the porous FGPM plates. Using D’Alembert’s principle, the out-of-plane equation of motion is derived by taking into account the Kármán nonlinear geometrical relations. After that, the Galerkin method is used to discretize the equation of motion, resulting in a set of ordinary differential equations with respect to time. These ordinary differential equations are solved analytically by employing the harmonic balance method. The approximate analytical results are verified by using the adaptive step-size fourth-order Runge–Kutta method. By means of the perturbation technique, the stability of approximate analytical solutions is examined. An interesting nonlinear broadband vibration phenomenon is detected in the FGPM plates with porosities. Nonlinear frequency-response characteristics of the present smart structures are investigated for various system parameters including the porosity type, the porosity volume fraction, the electric potential, the external excitation, the damping and the constituent volume fraction. It is found that these parameters have significant effects on the nonlinear vibration characteristics of porous FGPM plates.

  4. Resonances in nonlinear structure vibrations under multifrequency excitations

    Energy Technology Data Exchange (ETDEWEB)

    El-Bassiouny, A F [Faculty of Science, Mathematics Department, Benha University, Benha 1358 (Egypt); El-Latif, G M Abd [Faculty of Science, Mathematics Department, Sohag University, Sohag (Egypt)

    2006-10-15

    The response of a single-degree-of-freedom system with quadratic, cubic and quartic nonlinearities subjected to a sinusoidal excitation that involves multiple frequencies is considered. The method of multiple scales is used to construct a first order uniform expansion yielding two first-order nonlinear ordinary differential equations that are derived for the evolution of the amplitude and phase. These oscillations involve a subharmonic oscillation of order one-fourth and superharmonic oscillation of order two. Steady state responses and their stability are computed for selected values of the system parameters. The effects of these (quadratic, cubic, and quartic) nonlinearities on these oscillations are specifically investigated. With this study, it has been verified that the qualitative effects of these nonlinearities are different. Regions of hardening (softening) behaviour of the system exist for the case of subharmonic resonance. The response curve is not affected by decreasing the damping factor for the case of superharmonic resonance. It is shown that the response curve contracts or expands as the parameters vary. The multivalued region increases or decreases when some parameters vary.

  5. On the dimension of complex responses in nonlinear structural vibrations

    Science.gov (United States)

    Wiebe, R.; Spottswood, S. M.

    2016-07-01

    The ability to accurately model engineering systems under extreme dynamic loads would prove a major breakthrough in many aspects of aerospace, mechanical, and civil engineering. Extreme loads frequently induce both nonlinearities and coupling which increase the complexity of the response and the computational cost of finite element models. Dimension reduction has recently gained traction and promises the ability to distill dynamic responses down to a minimal dimension without sacrificing accuracy. In this context, the dimensionality of a response is related to the number of modes needed in a reduced order model to accurately simulate the response. Thus, an important step is characterizing the dimensionality of complex nonlinear responses of structures. In this work, the dimensionality of the nonlinear response of a post-buckled beam is investigated. Significant detail is dedicated to carefully introducing the experiment, the verification of a finite element model, and the dimensionality estimation algorithm as it is hoped that this system may help serve as a benchmark test case. It is shown that with minor modifications, the method of false nearest neighbors can quantitatively distinguish between the response dimension of various snap-through, non-snap-through, random, and deterministic loads. The state-space dimension of the nonlinear system in question increased from 2-to-10 as the system response moved from simple, low-level harmonic to chaotic snap-through. Beyond the problem studied herein, the techniques developed will serve as a prescriptive guide in developing fast and accurate dimensionally reduced models of nonlinear systems, and eventually as a tool for adaptive dimension-reduction in numerical modeling. The results are especially relevant in the aerospace industry for the design of thin structures such as beams, panels, and shells, which are all capable of spatio-temporally complex dynamic responses that are difficult and computationally expensive to

  6. Vibration attenuation of a continuous rotor-blisk-journal bearing system employing smooth nonlinear energy sinks

    Science.gov (United States)

    Bab, Saeed; Khadem, S. E.; Shahgholi, Majid; Abbasi, Amirhassan

    2017-02-01

    The current paper investigates the effects of a number of smooth nonlinear energy sinks (NESs) located on the disk and bearings on the vibration attenuation of a rotor-blisk-journal bearing system under excitation of a mass eccentricity force. The blade and rotor are modeled using the Euler-Bernoulli beam theory. The nonlinear energy sinks on the bearing have a linear damping and an essentially nonlinear stiffness. The nonlinear energy sinks on the disk have a linear damping, linear stiffness, and an essentially nonlinear stiffness. It can be seen that the linear stiffness of the NESs on the disk is eliminated by the negative stiffness induced by the centrifugal force, and the collection of the NESs can be tuned to a required rotational speed of the rotor by varying the linear stiffness of the NESs. Furthermore, the remained stiffness of the NESs on the disk after elimination of their linear stiffness, would be essentially a nonlinear (nonlinearizable) one. Two nonlinear energy sinks in the vertical axes are positioned on the bearing housing and nnd NESs are located on the perimeter of the disk. The equations of motion are extracted using the extended Hamilton principle. The modal coordinates and complex transformations are employed to decrease the number of equations of motion. A genetic algorithm is used to optimize the parameters of the nonlinear energy sinks and its objective function is considered as minimizing the vibration of the rotating system within an operating speed range. In order to examine the periodic and non-periodic solutions of the system, time history, bifurcation diagram, Poincaré map, phase portrait, Lyapunov exponent, and power spectra analyses are performed. System shows periodic and quasi-periodic motions for different values of the system parameters. It is shown that the NESs on the disk and bearings have almost local effects on vibration reduction of rotating system. In addition, the optimum NESs remove the instability region from the

  7. PI-type Iterative Learning Control for Nonlinear Electro-hydraulic Servo Vibrating System

    Institute of Scientific and Technical Information of China (English)

    LUO Xiaohui; ZHU Yuquan; HU Junhua

    2009-01-01

    For the electro-hydraulic servo vibrating system(ESVS) with the characteristics of non-linearity and repeating motion, a novel method, PI-type iterative learning control(ILC), is proposed on the basis of traditional PID control. By using memory ability of computer, the method keeps last time's tracking error of the system and then applies the error information to the next time's control process. At the same time, a forgetting factor and a D-type learning law of feedforward fuzzy-inferring referenced displacement error under the optimal objective are employed to enhance the systemic robustness and tracking accuracy. The results of simulation and test reveal that the algorithm has a trait of high repeating precision, and could restrain the influence of nonlinear factors like leaking, external disturbance, aerated oil, etc. Compared with traditional PID control, it could better meet the requirement of nonlinear electro-hydraulic servo vibrating system.

  8. THERMOELASTICALLY COUPLED AXISYMMETRIC NONLINEAR VIBRATION OF SHALLOW SPHERICAL AND CONICAL SHELLS

    Institute of Scientific and Technical Information of China (English)

    王永岗; 戴诗亮

    2004-01-01

    The problem of axisymmetric nonlinear vibration for shallow thin spherical and conical shells when temperature and strain fields are coupled is studied. Based on the large deflection theories of von Krmn and the theory of thermoelasticity, the whole governing equations and their simplified type are derived. The time-spatial variables are separated by Galerkin's technique, thus reducing the governing equations to a system of time-dependent nonlinear ordinary differential equation. By means of regular perturbation method and multiple-scales method, the first-order approximate analytical solution for characteristic relation of frequency vs amplitude parameters along with the decay rate of amplitude are obtained, and the effects of different geometric parameters and coupling factors as well as boundary conditions on thermoelastically coupled nonlinear vibration behaviors are discussed.

  9. PRINCIPAL RESONANCE IN TRANSVERSE NONLINEAR PARAMETRIC VIBRATION OF AN AXIALLY ACCELERATING VISCOELASTIC STRING

    Institute of Scientific and Technical Information of China (English)

    CHEN Liqun; Jean W.ZU; WU Jun

    2004-01-01

    To investigate the principal resonance in transverse nonlinear parametric vibration of an axially accelerating viscoelastic string, the method of multiple scales is applied directly to the nonlinear partial differential equation that governs the transverse vibration of the string. To derive the governing equation, Newton's second law, Lagrangean strain, and Kelvin's model are respectively used to account the dynamical relation, geometric nonlinearity and the viscoelasticity of the string material.Based on the solvability condition of eliminating the secular terms, closed form solutions are obtained for the amplitude and the existence conditions of nontrivial steady-state response of the principal parametric resonance. The Lyapunov linearized stability theory is employed to analyze the stability of the trivial and nontrivial solutions in the principal parametric resonance. Some numerical examples are presented to show the effects of the mean transport speed, the amplitude and the frequency of speed variation.

  10. Nonlinear Vibration of Rotor Rubbing Stator Caused by Initial Perturbation

    Institute of Scientific and Technical Information of China (English)

    张小章; 隆锦胜; 李正光

    2001-01-01

    The vibration of a rotor rubbing a stator caused by an initial perturbation was studied analytically.The analytical model consists of a simple disc shaft rotor and a fixed stator. The perturbation is aninstantaneous change of the radial velocity when the rotor is operating in its normal steady state. The analysisshowed that the rotor may continue rubbing the stator for small clearance, even if the initial perturbation nolonger exists. For the interest of engineering applications, we investigated various rotating speeds,perturbation amplitudes and clearances between the rotor and the stator. Various friction coefficients on thecontact surface were also considered. The graphical results can be used for the design of rotating machines.``

  11. Analytical and Experimental Random Vibration of Nonlinear Aeroelastic Structures.

    Science.gov (United States)

    1987-01-28

    full) are belon- ging to the first normal mode which obviously pre- 0 0.3 oC og s .a ,i e domiwates the response. It is also seen that asmas the...543. New Mexico Ewins. D 1 (1969). The effects of dentuning upon the forced vibrations of Bliven. D 0. and Soong. T T (1969) On frequencies of elastic...1986) Interactive multiobjective fuzzy optim- thesis. Univ of New Mexico . zation design of ship grillage structure Proa of the 1st ant conference on

  12. Wind Turbine Tower Vibration Modeling and Monitoring by the Nonlinear State Estimation Technique (NSET

    Directory of Open Access Journals (Sweden)

    Peng Guo

    2012-12-01

    Full Text Available With appropriate vibration modeling and analysis the incipient failure of key components such as the tower, drive train and rotor of a large wind turbine can be detected. In this paper, the Nonlinear State Estimation Technique (NSET has been applied to model turbine tower vibration to good effect, providing an understanding of the tower vibration dynamic characteristics and the main factors influencing these. The developed tower vibration model comprises two different parts: a sub-model used for below rated wind speed; and another for above rated wind speed. Supervisory control and data acquisition system (SCADA data from a single wind turbine collected from March to April 2006 is used in the modeling. Model validation has been subsequently undertaken and is presented. This research has demonstrated the effectiveness of the NSET approach to tower vibration; in particular its conceptual simplicity, clear physical interpretation and high accuracy. The developed and validated tower vibration model was then used to successfully detect blade angle asymmetry that is a common fault that should be remedied promptly to improve turbine performance and limit fatigue damage. The work also shows that condition monitoring is improved significantly if the information from the vibration signals is complemented by analysis of other relevant SCADA data such as power performance, wind speed, and rotor loads.

  13. Effect of nonlinearity of connecting dampers on vibration control of connected building structures

    Directory of Open Access Journals (Sweden)

    Masatoshi eKasagi

    2016-01-01

    Full Text Available The connection of two building structures with dampers is one of effective vibration control systems. In this vibration control system, both buildings have to possess different vibration properties in order to provide a higher vibration reduction performance. In addition to such condition of different vibration properties of both buildings, the connecting dampers also play an important role in the vibration control mechanism. In this paper, the effect of nonlinearity of connecting dampers on the vibration control of connected building structures is investigated in detail. A high-damping rubber damper and an oil damper with and without relief mechanism are treated. It is shown that, while the high-damping rubber damper is effective in a rather small deformation level, the linear oil damper is effective in a relatively large deformation level. It is further shown that, while the oil dampers reduce the response in the same phase as the case without dampers, the high-damping rubber dampers change the phase. The merit is that the high-damping rubber can reduce the damper deformation and keep the sufficient space between both buildings. This can mitigate the risk of building pounding.

  14. Influences on nonlinear judder vibrations of railway brakes

    Science.gov (United States)

    Heckmann, Andreas; Kurzeck, Bernhard; Carrarini, Antonio; Günther, Frank; Schroeder-Bodenstein, Kaspar

    2010-06-01

    The paper reports on a joined research project of Knorr-Bremse, Siemens Mobility and the Institute of Robotics and Mechatronics. The goal of the project was to analyse the dynamical behaviour of friction brakes for high-speed trains. It was intended to gain insight into possible vibration mechanisms and to assess the potential for lay-out and operation improvements for future light-weight designs. In particular, the frequency range up to 250 Hz has been addressed, since the corresponding excitation is unavoidable at least to some extent and has to be considered when the brake system is designed. The study includes a comprehensive multibody simulation study and its comparison to experimental results at the test rig of Knorr-Bremse in Munich. The simulation model is adapted step by step in order to clearly identify and separate the influences on the dynamical properties of the complete brake system including its mounting. Additionally a minimal model is introduced that demonstrates some characteristics of the brake system. It turned out that the underlying knowledge is essential for the mechanical lay-out, which could be demonstrated by solving a particular vibration problem in an actual high-speed project.

  15. Influence of combined fundamental potentials in a nonlinear vibration energy harvester

    Science.gov (United States)

    Podder, Pranay; Mallick, Dhiman; Amann, Andreas; Roy, Saibal

    2016-11-01

    Ambient mechanical vibrations have emerged as a viable energy source for low-power wireless sensor nodes aiming the upcoming era of the ‘Internet of Things’. Recently, purposefully induced dynamical nonlinearities have been exploited to widen the frequency spectrum of vibration energy harvesters. Here we investigate some critical inconsistencies between the theoretical formulation and applications of the bistable Duffing nonlinearity in vibration energy harvesting. A novel nonlinear vibration energy harvesting device with the capability to switch amidst individually tunable bistable-quadratic, monostable-quartic and bistable-quartic potentials has been designed and characterized. Our study highlights the fundamentally different large deflection behaviors of the theoretical bistable-quartic Duffing oscillator and the experimentally adapted bistable-quadratic systems, and underlines their implications in the respective spectral responses. The results suggest enhanced performance in the bistable-quartic potential in comparison to others, primarily due to lower potential barrier and higher restoring forces facilitating large amplitude inter-well motion at relatively lower accelerations.

  16. Broadband and three-dimensional vibration energy harvesting by a non-linear magnetoelectric generator

    Science.gov (United States)

    Lin, Zhiming; Chen, Jun; Li, Xiaoshi; Li, Jun; Liu, Jun; Awais, Qasim; Yang, Jin

    2016-12-01

    Vibration, widely existing in an ambient environment with a variety of forms and wide-range of scales, recently becomes an attractive target for energy harvesting. However, its time-varying directions and frequencies render a lack of effective energy technology to scavenge it. Here, we report a rationally designed nonlinear magnetoelectric generator for broadband and multi-directional vibration energy harvesting. By using a stabilized three-dimensional (3D) magnetic interaction and spring force, the device working bandwidth was largely broadened, which was demonstrated both experimentally and theoretically. The multidirectional vibration energy harvesting was enabled by three identical suspended springs with equal intersection angles, which are all connected to a cylindrical magnet. Numerical simulations and experimental results show that the nonlinear harvester can sustain large-amplitude oscillations over a wide frequency range, and it can generate power efficiently in an arbitrary direction. Moreover, the experimental data suggest that the proposed nonlinear energy harvester has the potential to scavenge vibrational energy over a broad range of ambient frequencies in 3D space.

  17. Grain size effects on stability of nonlinear vibration with nanocrystalline NiTi shape memory alloy

    Science.gov (United States)

    Xia, Minglu; Sun, Qingping

    2017-10-01

    Grain size effects on stability of thermomechanical responses for a nonlinear torsional vibration system with nanocrystalline superelastic NiTi bar are investigated in the frequency and amplitude domains. NiTi bars with average grain size from 10 nm to 100 nm are fabricated through cold-rolling and subsequent annealing. Thermomechanical responses of the NiTi bar as a softening nonlinear damping spring in the torsional vibration system are obtained by synchronised acquisition of rotational angle and temperature under external sinusoidal excitation. It is shown that nonlinearity and damping capacity of the NiTi bar decrease as average grain size of the material is reduced below 100 nm. Therefore jump phenomena of thermomechanical responses become less significant or even vanish and the vibration system becomes more stable. The work in this paper provides a solid experimental base for manipulating the undesired jump phenomena of thermomechanical responses and stabilising the mechanical vibration system through grain refinement of NiTi SMA.

  18. Component mode synthesis and large deflection vibration of complex structures. Volume 3: Multiple-mode nonlinear free and forced vibrations of beams using finite element method

    Science.gov (United States)

    Mei, Chuh; Shen, Mo-How

    1987-01-01

    Multiple-mode nonlinear forced vibration of a beam was analyzed by the finite element method. Inplane (longitudinal) displacement and inertia (IDI) are considered in the formulation. By combining the finite element method and nonlinear theory, more realistic models of structural response are obtained more easily and faster.

  19. Global Dynamic Characteristic of Nonlinear Torsional Vibration System under Harmonically Excitation

    Institute of Scientific and Technical Information of China (English)

    SHI Peiming; LIU Bin; HOU Dongxiao

    2009-01-01

    Torsional vibration generally causes serious instability and damage problems in many rotating machinery parts. The global dynamic characteristic of nonlinear torsional vibration system with nonlinear rigidity and nonlinear friction force is investigated. On the basis of the generalized dissipation Lagrange's equation, the dynamics equation of nonlinear torsional vibration system is deduced. The bifurcation and chaotic motion in the system subjected to an external harmonic excitation is studied by theoretical analysis and numerical simulation. The stability of unperturbed system is analyzed by using the stability theory of equilibrium positions of Hamiltonian systems. The criterion of existence of chaos phenomena under a periodic perturbation is given by means of Melnikov's method. It is shown that the existence of homoclinic and heteroclinic orbits in the unperturbed system implies chaos arising from breaking of homoclinic or heteroclinic orbits under perturbation. The validity of the result is checked numerically. Periodic doubling bifurcation route to chaos, quasi-periodic route to chaos, intermittency route to chaos are found to occur due to the amplitude varying in some range. The evolution of system dynamic responses is demonstrated in detail by Poincare maps and bifurcation diagrams when the system undergoes a sequence of periodic doubling or quasi-periodic bifurcations to chaos. The conclusion can provide reference for deeply researching the dynamic behavior of mechanical drive systems.

  20. Active Vibration Control of a Nonlinear Beam with Self- and External Excitations

    Directory of Open Access Journals (Sweden)

    J. Warminski

    2013-01-01

    Full Text Available An application of the nonlinear saturation control (NSC algorithm for a self-excited strongly nonlinear beam structure driven by an external force is presented in the paper. The mathematical model accounts for an Euler-Bernoulli beam with nonlinear curvature, reduced to first mode oscillations. It is assumed that the beam vibrates in the presence of a harmonic excitation close to the first natural frequency of the beam, and additionally the beam is self-excited by fluid flow, which is modelled by a nonlinear Rayleigh term for self-excitation. The self- and externally excited vibrations have been reduced by the application of an active, saturation-based controller. The approximate analytical solutions for a full structure have been found by the multiple time scales method, up to the first-order approximation. The analytical solutions have been compared with numerical results obtained from direct integration of the ordinary differential equations of motion. Finally, the influence of a negative damping term and the controller's parameters for effective vibrations suppression are presented.

  1. Active vibration control for nonlinear vehicle suspension with actuator delay via I/O feedback linearization

    Science.gov (United States)

    Lei, Jing; Jiang, Zuo; Li, Ya-Li; Li, Wu-Xin

    2014-10-01

    The problem of nonlinear vibration control for active vehicle suspension systems with actuator delay is considered. Through feedback linearization, the open-loop nonlinearity is eliminated by the feedback nonlinear term. Based on the finite spectrum assignment, the quarter-car suspension system with actuator delay is converted into an equivalent delay-free one. The nonlinear control includes a linear feedback term, a feedforward compensator, and a control memory term, which can be derived from a Riccati equation and a Sylvester equation, so that the effects produced by the road disturbances and the actuator delay are compensated, respectively. A predictor is designed to implement the predictive state in the designed control. Moreover, a reduced-order observer is constructed to solve its physical unrealisability problem. The stability proofs for the zero dynamics and the closed-loop system are provided. Numerical simulations illustrate the effectiveness and the simplicity of the designed control.

  2. Nonlinear vibration of functionally graded circular cylindrical shells based on improved Donnell equations

    Science.gov (United States)

    Bich, Dao Huy; Xuan Nguyen, Nguyen

    2012-12-01

    In the present work, the study of the nonlinear vibration of a functionally graded cylindrical shell subjected to axial and transverse mechanical loads is presented. Material properties are graded in the thickness direction of the shell according to a simple power law distribution in terms of volume fractions of the material constituents. Governing equations are derived using improved Donnell shell theory ignoring the shallowness of cylindrical shells and kinematic nonlinearity is taken into consideration. One-term approximate solution is assumed to satisfy simply supported boundary conditions. The Galerkin method, the Volmir's assumption and fourth-order Runge-Kutta method are used for dynamical analysis of shells to give explicit expressions of natural frequencies, nonlinear frequency-amplitude relation and nonlinear dynamic responses. Numerical results show the effects of characteristics of functionally graded materials, pre-loaded axial compression and dimensional ratios on the dynamical behavior of shells. The proposed results are validated by comparing with those in the literature.

  3. Vibration control of a nonlinear quarter-car active suspension system by reinforcement learning

    Science.gov (United States)

    Bucak, İ. Ö.; Öz, H. R.

    2012-06-01

    This article presents the investigation of performance of a nonlinear quarter-car active suspension system with a stochastic real-valued reinforcement learning control strategy. As an example, a model of a quarter car with a nonlinear suspension spring subjected to excitation from a road profile is considered. The excitation is realised by the roughness of the road. The quarter-car model to be considered here can be approximately described as a nonlinear two degrees of freedom system. The experimental results indicate that the proposed active suspension system suppresses the vibrations greatly. A simulation of a nonlinear quarter-car active suspension system is presented to demonstrate the effectiveness and examine the performance of the learning control algorithm.

  4. An optimal approach to active damping of nonlinear vibrations in composite plates using piezoelectric patches

    Science.gov (United States)

    Saviz, M. R.

    2015-11-01

    In this paper a nonlinear approach to studying the vibration characteristic of laminated composite plate with surface-bonded piezoelectric layer/patch is formulated, based on the Green Lagrange type of strain-displacements relations, by incorporating higher-order terms arising from nonlinear relations of kinematics into mathematical formulations. The equations of motion are obtained through the energy method, based on Lagrange equations and by using higher-order shear deformation theories with von Karman-type nonlinearities, so that transverse shear strains vanish at the top and bottom surfaces of the plate. An isoparametric finite element model is provided to model the nonlinear dynamics of the smart plate with piezoelectric layer/ patch. Different boundary conditions are investigated. Optimal locations of piezoelectric patches are found using a genetic algorithm to maximize spatial controllability/observability and considering the effect of residual modes to reduce spillover effect. Active attenuation of vibration of laminated composite plate is achieved through an optimal control law with inequality constraint, which is related to the maximum and minimum values of allowable voltage in the piezoelectric elements. To keep the voltages of actuator pairs in an allowable limit, the Pontryagin’s minimum principle is implemented in a system with multi-inequality constraint of control inputs. The results are compared with similar ones, proving the accuracy of the model especially for the structures undergoing large deformations. The convergence is studied and nonlinear frequencies are obtained for different thickness ratios. The structural coupling between plate and piezoelectric actuators is analyzed. Some examples with new features are presented, indicating that the piezo-patches significantly improve the damping characteristics of the plate for suppressing the geometrically nonlinear transient vibrations.

  5. Nonlinear vibrations and imperfection sensitivity of a cylindrical shell containing axial fluid flow

    Science.gov (United States)

    del Prado, Z.; Gonçalves, P. B.; Païdoussis, M. P.

    2009-10-01

    The high imperfection sensitivity of cylindrical shells under static compressive axial loads is a well-known phenomenon in structural stability. On the other hand, less is known of the influence of imperfections on the nonlinear vibrations of these shells under harmonic axial loads. The aim of this work is to study the simultaneous influence of geometric imperfections and an axial fluid flow on the nonlinear vibrations and instabilities of simply supported circular cylindrical shells under axial load. The fluid is assumed to be non-viscous and incompressible and the flow to be isentropic and irrotational. The behavior of the thin-walled shell is modeled by Donnell's nonlinear shallow-shell equations. It is subjected to a static uniform compressive axial pre-load plus a harmonic axial load. A low-dimensional modal expansion, which satisfies the relevant boundary and continuity conditions, and takes into account all relevant nonlinear modal interactions observed in the past in the nonlinear vibrations of cylindrical shells with and without flow is used together with the Galerkin method to derive a set of eight coupled nonlinear ordinary differential equations of motion which are, in turn, solved by the Runge-Kutta method. The shell is considered to be initially at rest, in a position corresponding to a pre-buckling configuration. Then, a harmonic excitation is applied and conditions for parametric instability and dynamic snap-through are sought. The results clarify the marked influence of geometric imperfections and fluid flow on the dynamic stability boundaries, bifurcations and basins of attraction.

  6. The Nonlinear Behavior of Vibrational Conveyers with Single-Mass Crank-and-Rod Exciters

    Directory of Open Access Journals (Sweden)

    G. Füsun Alışverişçi

    2012-01-01

    Full Text Available The single-mass, crank-and-rod exciters vibrational conveyers have a trough supported on elastic stands which are rigidly fastened to the trough and a supporting frame. The trough is oscillated by a common crank drive. This vibration causes the load to move forward and upward. The moving loads jump periodically and move forward with relatively small vibration. The movement is strictly related to vibrational parameters. This is applicable in laboratory conditions in the industry which accommodate a few grams of loads, up to those that accommodate tons of loading capacity. In this study I explore the transitional behavior across resonance, during the starting of a single degree of freedom vibratory system excited by crank-and-rod. A loaded vibratory conveyor is more safe to start than an empty one. Vibrational conveyers with cubic nonlinear spring and ideal vibration exciter have been analyzed analytically for primary and secondary resonance by the Method of Multiple Scales, and numerically. The approximate analytical results obtained in this study have been compared with the numerical results and have been found to be well matched.

  7. Acceleration Control in Nonlinear Vibrating Systems based on Damped Least Squares

    CERN Document Server

    Pilipchuk, V N

    2011-01-01

    A discrete time control algorithm using the damped least squares is introduced for acceleration and energy exchange controls in nonlinear vibrating systems. It is shown that the damping constant of least squares and sampling time step of the controller must be inversely related to insure that vanishing the time step has little effect on the results. The algorithm is illustrated on two linearly coupled Duffing oscillators near the 1:1 internal resonance. In particular, it is shown that varying the dissipation ratio of one of the two oscillators can significantly suppress the nonlinear beat phenomenon.

  8. Nonlinear Analysis of Cable Vibration of a Multispan Cable-Stayed Bridge under Transverse Excitation

    OpenAIRE

    Kun Lin; Dujian Zou; Minghai Wei

    2014-01-01

    The nonlinear vibrations of cable in a multispan cable-stayed bridge subjected to transverse excitation are investigated. The MECS (multielements cable system) model, where multielements per cable stay are used, is built up and used to analyze the model properties of the multispan cable-stayed bridges. Then, a simplified two-degrees-of-freedom (2-DOFs) model, where the tower or the deck is reduced to a beam, is proposed to analyze the nonlinear dynamic behaviors of the beam and cable. The res...

  9. Crystal growth and comparison of vibrational and thermal properties of semi-organic nonlinear optical materials

    Indian Academy of Sciences (India)

    S Gunasekaran; G Anand; R Arun Balaji; J Dhanalakshmi; S Kumaresan

    2010-10-01

    Single crystals of urea thiourea mercuric sulphate (UTHS) and urea thiourea mercuric chloride (UTHC), semi-organic nonlinear optical materials, were grown by low-temperature solution growth technique by slow evaporation method using water as the solvent. Good quality single crystals were grown within three weeks. The nonlinear nature of the crystals was confirmed by SHG test. The UV–Vis spectrum showed the transmitting ability of the crystals in the entire visible region. FTIR spectrum was recorded and vibrational assignments were made. The degree of dopant inclusion was ascertained by AAS. The TGA–DTA studies showed the thermal properties of the crystals.

  10. Effect of transverse shears on complex nonlinear vibrations of elastic beams

    Science.gov (United States)

    Krysko, V. A.; Zhigalov, M. V.; Saltykova, O. A.; Krysko, A. V.

    2011-09-01

    Models of geometrically nonlinear Euler-Bernoulli, Timoshenko, and Sheremet'ev-Pelekh beams under alternating transverse loading were constructed using the variational principle and the hypothesis method. The obtained differential equation systems were analyzed based on nonlinear dynamics and the qualitative theory of differential equations with using the finite difference method with the approximation O(h2) and the Bubnov-Galerkin finite element method. It is shown that for a relative thickness λ ⩽ 50, accounting for the rotation and bending of the beam normal leads to a significant change in the beam vibration modes.

  11. Two Degrees of Freedom Non-linear Model to Study the Automobile’s Vibrations

    OpenAIRE

    Nicolae–Doru Stănescu

    2010-01-01

    In this paper we present a non-linear model for the study of an automobile's vibrations. The model has two degrees of freedom and it is highly non-linear. The forces in the springs are considered to be given by a polynomial potential. The equations of motion are obtained using the Lagrange second order equations. We determined the equilibrium positions. We proved the conditions for the uniqueness of the equilibrium. In our paper we studied the stability of the equilibrium and the stability of...

  12. Two Degrees of Freedom Non-linear Model to Study the Automobile’s Vibrations

    Directory of Open Access Journals (Sweden)

    Nicolae–Doru Stănescu

    2010-01-01

    Full Text Available In this paper we present a non-linear model for the study of an automobile's vibrations. The model has two degrees of freedom and it is highly non-linear. The forces in the springs are considered to be given by a polynomial potential. The equations of motion are obtained using the Lagrange second order equations. We determined the equilibrium positions. We proved the conditions for the uniqueness of the equilibrium. In our paper we studied the stability of the equilibrium and the stability of the motion. Finally a numerical application is presented.

  13. STOCHASTIC OPTIMAL VIBRATION CONTROL OF PARTIALLY OBSERVABLE NONLINEAR QUASI HAMILTONIAN SYSTEMS WITH ACTUATOR SATURATION

    Institute of Scientific and Technical Information of China (English)

    Ronghua Huan; Lincong Chen; Weiliang Jin; Weiqiu Zhu

    2009-01-01

    An optimal vibration control strategy for partially observable nonlinear quasi Hamil-tonian systems with actuator saturation is proposed. First, a controlled partially observable non-linear system is converted into a completely observable linear control system of finite dimension based on the theorem due to Charalambous and Elliott. Then the partially averaged Ito stochas-tic differential equations and dynamical programming equation associated with the completely observable linear system are derived by using the stochastic averaging method and stochastic dynamical programming principle, respectively. The optimal control law is obtained from solving the final dynamical programming equation. The results show that the proposed control strategy has high control effectiveness and control efficiency.

  14. Influence of nanoscale temperature rises on photoacoustic generation: discrimination between optical absorbers based on nonlinear photoacoustics at high frequency

    CERN Document Server

    Simandoux, Oliver; Gâteau, Jérôme; Bossy, Emmanuel

    2013-01-01

    In the thermoelastic regime, photoacoustic sensing of optical absorption relies on conversion from light to acoustic energy via the coefficient of thermal expansion \\beta. In this work, we confront confront experimental measurements to theoretical predictions of nonlinear photoacoustic generation based on the dynamic variation of \\beta(T) during the optical excitation of absorbers in aqueous solution. The photoacoustic generation from solutions of organic dye and gold nanospheres (with same optical densities), illuminated with 532 nm nanosecond pulses, was detected using a high frequency ultrasound transducer (center frequency 20 MHz). Photoacoustic emission was observed with gold nanospheres at low fluence (a few mJ/cm2) for an equilibrium temperature around 4{\\deg}C, where the linear photoacoustic effect in water vanishes, highlighting the nonlinear emission from the solution of nanospheres. Under the same condition, no emission was observed with the absorbing organic dye. At a fixed fluence of 5 mJ/cm2, th...

  15. Multi-modal vibration energy harvesting approach based on nonlinear oscillator arrays under magnetic levitation

    Science.gov (United States)

    Abed, I.; Kacem, N.; Bouhaddi, N.; Bouazizi, M. L.

    2016-02-01

    We propose a multi-modal vibration energy harvesting approach based on arrays of coupled levitated magnets. The equations of motion which include the magnetic nonlinearity and the electromagnetic damping are solved using the harmonic balance method coupled with the asymptotic numerical method. A multi-objective optimization procedure is introduced and performed using a non-dominated sorting genetic algorithm for the cases of small magnet arrays in order to select the optimal solutions in term of performances by bringing the eigenmodes close to each other in terms of frequencies and amplitudes. Thanks to the nonlinear coupling and the modal interactions even for only three coupled magnets, the proposed method enable harvesting the vibration energy in the operating frequency range of 4.6-14.5 Hz, with a bandwidth of 190% and a normalized power of 20.2 {mW} {{cm}}-3 {{{g}}}-2.

  16. Vibration mitigation of a bridge cable using a nonlinear energy sink: design and experiment

    Directory of Open Access Journals (Sweden)

    Weiss Mathieu

    2015-01-01

    Full Text Available This work deals with the design and experiment of a cubic nonlinear energy sink (NES for horizontal vibration mitigation of a bridge cable. Modal analysis of horizontal linear modes of the cable is experimentally performed using accelerometers and displacement sensors. A theoretical simplified 2-dof model of the coupled cable-NES system is used to analytically design the NES by mean of multi-time scale systems behaviours and detection its invariant manifold, equilibrium and singular points which stand for periodic and strongly modulated regimes, respectively. Numerical integration is used to confirm the efficiency of the designed NES for the system under step release excitation. Then, the prototype system is built using geometrical cubic nonlinearity as the potential of the NES. Efficiency of the prototype system for mitigation of horizontal vibrations of the cable under for step release and forced excitations is experimentally demonstrated.

  17. Nonlinear traveling wave vibration of a circular cylindrical shell subjected to a moving concentrated harmonic force

    Science.gov (United States)

    Wang, Y. Q.; Guo, X. H.; Li, Y. G.; Li, J.

    2010-03-01

    This is a study of nonlinear traveling wave response of a cantilever circular cylindrical shell subjected to a concentrated harmonic force moving in a concentric circular path at a constant velocity. Donnell's shallow-shell theory is used, so that moderately large vibrations are analyzed. The problem is reduced to a system of ordinary differential equations by means of the Galerkin method. Frequency-responses for six different mode expansions are studied and compared with that for single mode to find the more contracted and accurate mode expansion investigating traveling wave vibration. The method of harmonic balance is applied to study the nonlinear dynamic response in forced oscillations of this system. Results obtained with analytical method are compared with numerical simulation, and the agreement between them bespeaks the validity of the method developed in this paper. The stability of the period solutions is also examined in detail.

  18. Vibrational spectroscopic and non-linear optical activity studies on nicotinanilide : A DFT approach

    Energy Technology Data Exchange (ETDEWEB)

    Premkumar, S.; Mathavan, T.; Dhas, M. Kumara; Benial, A. Milton Franklin, E-mail: miltonfranklin@yahoo.com [Department of Physics, N.M.S.S.V.N. College, Madurai-625 019, Tamil Nadu (India); Jawahar, A. [Department of Chemistry, N.M.S.S.V.N. College, Madurai-625 019, Tamil Nadu (India)

    2015-06-24

    The molecular structure of nicotinanilide was optimized by the DFT/B3LYP method with cc-pVTZ basis set using Gaussian 09 program. The first order hyperpolarizability of the molecule was calculated, which exhibits the higher nonlinear optical activity. The natural bond orbital analysis confirms the presence of intramolecular charge transfer and the hydrogen bonding interaction, which leads to the higher nonlinear optical activity of the molecule. The Frontier molecular orbitals analysis of the molecule shows that the delocalization of electron density occurs within the molecule. The lower energy gap indicates that the hydrogen bond formation between the charged species. The vibrational frequencies were calculated and assigned on the basis of potential energy distribution calculation using the VEDA 4.0 program and the corresponding vibrational spectra were simulated. Hence, the nicotinanilide molecule can be a good candidate for second-order NLO material.

  19. STEADY-STATE RESPONSES AND THEIR STABILITY OF NONLINEAR VIBRATION OF AN AXIALLY ACCELERATING STRING

    Institute of Scientific and Technical Information of China (English)

    吴俊; 陈立群

    2004-01-01

    The steady-state transverse vibration of an axially moving string with geometric nonlinearity was investigated. The transport speed was assumed to be a constant mean speed with small harmonic variations. The nonlinear partial-differential equation that governs the transverse vibration of the string was derived by use of the Hamilton principle. The method of multiple scales was applied directly to the equation. The solvability condition of eliminating the secular terms was established. Closed form solutions for the amplitude and the existence conditions of nontrivial steady-state response of the two-to-one parametric resonance were obtained. Some numerical examples showing effects of the mean transport speed, the amplitude and the frequency of speed variation were presented. The Liapunov linearized stability theory was employed to derive the instability conditions of the trivial solution and the nontrivial solutions for the two-to-one parametric resonance. Some numerical examples highlighting influences of the related parameters on the instability conditions were presented.

  20. Multirate Simulations of String Vibrations Including Nonlinear Fret-String Interactions Using the Functional Transformation Method

    Science.gov (United States)

    Trautmann, L.; Rabenstein, R.

    2004-12-01

    The functional transformation method (FTM) is a well-established mathematical method for accurate simulations of multidimensional physical systems from various fields of science, including optics, heat and mass transfer, electrical engineering, and acoustics. This paper applies the FTM to real-time simulations of transversal vibrating strings. First, a physical model of a transversal vibrating lossy and dispersive string is derived. Afterwards, this model is solved with the FTM for two cases: the ideally linearly vibrating string and the string interacting nonlinearly with the frets. It is shown that accurate and stable simulations can be achieved with the discretization of the continuous solution at audio rate. Both simulations can also be performed with a multirate approach with only minor degradations of the simulation accuracy but with preservation of stability. This saves almost 80% of the computational cost for the simulation of a six-string guitar and therefore it is in the range of the computational cost for digital waveguide simulations.

  1. Nonlinear Control Strategies for Bioprocesses: Sliding Mode Control versus Vibrational Control

    OpenAIRE

    Selisteanu, Dan; Petre, Emil; Popescu, Dorin; Bobasu, Eugen

    2008-01-01

    In this work, two nonlinear high-frequency control strategies for bioprocesses are proposed: a feedback sliding mode control law and a vibrational control strategy. In order to implement these strategies, a prototype bioprocess that is carried out in a Continuous Stirred Tank Bioreactor was considered. First, a discontinuous feedback law was designed using the exact linearization and by imposing a SMC that stabilizes the output of the bioprocess. When some state variables used in the control ...

  2. Advances in nonlinear vibration analysis of structures. Part-I. Beams

    Indian Academy of Sciences (India)

    Sudhakar R Marur

    2001-06-01

    The development of nonlinear vibration formulations for beams in the literature can be seen to have gone through distinct phases — earlier continuum solutions, development of appropriate forms, extra-variational simplifications, debate and discussions, variationally correct formulations and finally applications. A review of work in each of these phases is very necessary in order to have a complete understanding of the process of evolution of this field. This paper attempts to achieve precisely this objective.

  3. Nonlinear Vibration Characteristics of a Flexible Blade with Friction Damping due to Tip-Rub

    Directory of Open Access Journals (Sweden)

    Dengqing Cao

    2011-01-01

    Full Text Available An approximate approach is proposed in this paper for analyzing the two-dimensional friction contact problem so as to compute the dynamic response of a structure constrained by friction interfaces due to tip-rub. The dynamical equation of motion for a rotational cantilever blade in a centrifugal force field is established. Flow-induced distributed periodic forces and the internal material damping in the blade are accounted for in the governing equation of motion. The Galerkin method is employed to obtain a three-degree-of-freedom oscillator with friction damping due to tip-rub. The combined motion of impact and friction due to tip-rub produced a piecewise linear vibration which is actually nonlinear. Thus, a complete vibration cycle is divided into successive intervals. The system possesses linear vibration characteristic during each of these intervals, which can be determined using analytical solution forms. Numerical simulation shows that the parameters such as gap of the tip and the rotational speed of the blades have significant effects on the dynamical responses of the system. Finally, the nonlinear vibration characteristics of the blade are investigated in terms of the Poincare graph, and the frequency spectrum of the responses and the amplitude-frequency curves.

  4. Flow-induced vibrations of long circular cylinders modeled by coupled nonlinear oscillators

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The dynamics of long slender cylinders undergoing vortex-induced vibrations (VIV) is studied in this work. Long slender cylinders such as risers or tension legs are widely used in the field of ocean engineering. When the sea current flows past a cylinder, it will be excited due to vortex shedding. A three-dimensional time domain model is formulated to describe the response of the cylinder, in which the in-line (IL) and cross-flow (CF) deflections are coupled. The wake dynamics, including in-line and cross-flow vibrations, is represented using a pair of non-linear oscillators distributed along the cylinder. The wake oscillators are coupled to the dynamics of the long cylinder with the acceleration coupling term. A non-linear fluid force model is accounted for to reflect the relative motion of cylinder to current. The model is validated against the published data from a tank experiment with the free span riser. The comparisons show that some aspects due to VIV of long flexible cylinders can be reproduced by the proposed model, such as vibrating frequency, dominant mode number, occurrence and transition of the standing or traveling waves. In the case study, the simulations show that the IL curvature is not smaller than CF curvature, which indicates that both IL and CF vibrations are important for the structural fatigue damage.

  5. A fuzzy robust control scheme for vibration suppression of a nonlinear electromagnetic-actuated flexible system

    Science.gov (United States)

    Tavakolpour-Saleh, A. R.; Haddad, M. A.

    2017-03-01

    In this paper, a novel robust vibration control scheme, namely, one degree-of-freedom fuzzy active force control (1DOF-FAFC) is applied to a nonlinear electromagnetic-actuated flexible plate system. First, the flexible plate with clamped-free-clamped-free (CFCF) boundary conditions is modeled and simulated. Then, the validity of the simulation platform is evaluated through experiment. A nonlinear electromagnetic actuator is developed and experimentally modeled through a parametric system identification scheme. Next, the obtained nonlinear model of the actuator is applied to the simulation platform and performance of the proposed control technique in suppressing unwanted vibrations is investigated via simulation. A fuzzy controller is applied to the robust 1DOF control scheme to tune the controller gain using acceleration feedback. Consequently, an intelligent self-tuning vibration control strategy based on an inexpensive acceleration sensor is proposed in the paper. Furthermore, it is demonstrated that the proposed acceleration-based control technique owns the benefits of the conventional velocity feedback controllers. Finally, an experimental rig is developed to investigate the effectiveness of the 1DOF-FAFC scheme. It is found that the first, second, and third resonant modes of the flexible system are attenuated up to 74%, 81%, and 90% respectively through which the effectiveness of the proposed control scheme is affirmed.

  6. Interpreting nonlinear vibrational spectroscopy with the classical mechanical analogs of double-sided Feynman diagrams.

    Science.gov (United States)

    Noid, W G; Loring, Roger F

    2004-10-15

    Observables in coherent, multiple-pulse infrared spectroscopy may be computed from a vibrational nonlinear response function. This response function is conventionally calculated quantum-mechanically, but the challenges in applying quantum mechanics to large, anharmonic systems motivate the examination of classical mechanical vibrational nonlinear response functions. We present an approximate formulation of the classical mechanical third-order vibrational response function for an anharmonic solute oscillator interacting with a harmonic solvent, which establishes a clear connection between classical and quantum mechanical treatments. This formalism permits the identification of the classical mechanical analog of the pure dephasing of a quantum mechanical degree of freedom, and suggests the construction of classical mechanical analogs of the double-sided Feynman diagrams of quantum mechanics, which are widely applied to nonlinear spectroscopy. Application of a rotating wave approximation permits the analytic extraction of signals obeying particular spatial phase matching conditions from a classical-mechanical response function. Calculations of the third-order response function for an anharmonic oscillator coupled to a harmonic solvent are compared to numerically correct classical mechanical results.

  7. Nonlinear Analysis of Cable Vibration of a Multispan Cable-Stayed Bridge under Transverse Excitation

    Directory of Open Access Journals (Sweden)

    Kun Lin

    2014-01-01

    Full Text Available The nonlinear vibrations of cable in a multispan cable-stayed bridge subjected to transverse excitation are investigated. The MECS (multielements cable system model, where multielements per cable stay are used, is built up and used to analyze the model properties of the multispan cable-stayed bridges. Then, a simplified two-degrees-of-freedom (2-DOFs model, where the tower or the deck is reduced to a beam, is proposed to analyze the nonlinear dynamic behaviors of the beam and cable. The results of MECS model analysis show that the main tower in the multispan cable-stayed bridge is prone to the transverse vibration, and the local vibration of cables only has a little impact on the frequency values of the global modes. The results of simplified model analysis show that the energy can be transformed between the modes of the beam and cable when the nature frequencies of them are very close. On the other hand, with the transverse excitation changing, the cable can exhibit richer quasi-periodic or chaotic motions due to the nonlinear terms caused by the coupled mode between the beam and cable.

  8. Nonlinear nonuniform torsional vibrations of bars by the boundary element method

    Science.gov (United States)

    Sapountzakis, E. J.; Tsipiras, V. J.

    2010-05-01

    In this paper a boundary element method is developed for the nonuniform torsional vibration problem of bars of arbitrary doubly symmetric constant cross-section taking into account the effect of geometrical nonlinearity. The bar is subjected to arbitrarily distributed or concentrated conservative dynamic twisting and warping moments along its length, while its edges are supported by the most general torsional boundary conditions. The transverse displacement components are expressed so as to be valid for large twisting rotations (finite displacement-small strain theory), thus the arising governing differential equations and boundary conditions are in general nonlinear. The resulting coupling effect between twisting and axial displacement components is considered and torsional vibration analysis is performed in both the torsional pre- or post-buckled state. A distributed mass model system is employed, taking into account the warping, rotatory and axial inertia, leading to the formulation of a coupled nonlinear initial boundary value problem with respect to the variable along the bar angle of twist and to an "average" axial displacement of the cross-section of the bar. The numerical solution of the aforementioned initial boundary value problem is performed using the analog equation method, a BEM based method, leading to a system of nonlinear differential-algebraic equations (DAE), which is solved using an efficient time discretization scheme. Additionally, for the free vibrations case, a nonlinear generalized eigenvalue problem is formulated with respect to the fundamental mode shape at the points of reversal of motion after ignoring the axial inertia to verify the accuracy of the proposed method. The problem is solved using the direct iteration technique (DIT), with a geometrically linear fundamental mode shape as a starting vector. The validity of negligible axial inertia assumption is examined for the problem at hand.

  9. Vibration of piezoelectric nanobeams with an internal residual stress and a nonlinear strain

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Hao; Wang, Chengyuan, E-mail: cywang@ujs.edu.cn; Luo, Ying

    2015-10-23

    This Letter reports the effect of an internal residual stress and the local geometric nonlinearity on the vibration of piezoelectric nanowires (NWs). A dynamic equation is derived based on Hamilton's principle, which enables one to capture the above-mentioned effects and the influence of all lateral surfaces of a rectangular NW. Vibration frequencies are obtained for the NWs under an electrical voltage and compared with those given by the existing Young–Laplace model where zero internal stress, a linear strain and the effects of top and bottom surfaces of rectangular NWs are considered. It is found that the internal residual stress can extinguish the effect of the surface-induced residual stress and substantially down shift the frequency or qualitatively alter the size-dependence of the frequency. In addition, with a nonlinear strain the piezoelectric effect is found to be able to exert a direct impact on the bending stiffness of piezoelectric NWs. - Highlights: • A dynamic equation is derived for piezoelectric nanowires (PNs) by considering a nonlinear strain and an internal stress. • A nonlinear strain extends the piezoelectric effects to the bending stiffness of the PNs. • An internal stress decreases PN frequency and alters its thickness-dependence. • All lateral surfaces of PNs contribute substantially to the effect of surface piezoelectricity.

  10. Internal Resonance in a Vibrating Beam: A Zoo of Nonlinear Resonance Peaks.

    Science.gov (United States)

    Mangussi, Franco; Zanette, Damián H

    2016-01-01

    In oscillating mechanical systems, nonlinearity is responsible for the departure from proportionality between the forces that sustain their motion and the resulting vibration amplitude. Such effect may have both beneficial and harmful effects in a broad class of technological applications, ranging from microelectromechanical devices to edifice structures. The dependence of the oscillation frequency on the amplitude, in particular, jeopardizes the use of nonlinear oscillators in the design of time-keeping electronic components. Nonlinearity, however, can itself counteract this adverse response by triggering a resonant interaction between different oscillation modes, which transfers the excess of energy in the main oscillation to higher harmonics, and thus stabilizes its frequency. In this paper, we examine a model for internal resonance in a vibrating elastic beam clamped at its two ends. In this case, nonlinearity occurs in the form of a restoring force proportional to the cube of the oscillation amplitude, which induces resonance between modes whose frequencies are in a ratio close to 1:3. The model is based on a representation of the resonant modes as two Duffing oscillators, coupled through cubic interactions. Our focus is put on illustrating the diversity of behavior that internal resonance brings about in the dynamical response of the system, depending on the detailed form of the coupling forces. The mathematical treatment of the model is developed at several approximation levels. A qualitative comparison of our results with previous experiments and numerical calculations on elastic beams is outlined.

  11. Internal Resonance in a Vibrating Beam: A Zoo of Nonlinear Resonance Peaks

    Science.gov (United States)

    Mangussi, Franco

    2016-01-01

    In oscillating mechanical systems, nonlinearity is responsible for the departure from proportionality between the forces that sustain their motion and the resulting vibration amplitude. Such effect may have both beneficial and harmful effects in a broad class of technological applications, ranging from microelectromechanical devices to edifice structures. The dependence of the oscillation frequency on the amplitude, in particular, jeopardizes the use of nonlinear oscillators in the design of time-keeping electronic components. Nonlinearity, however, can itself counteract this adverse response by triggering a resonant interaction between different oscillation modes, which transfers the excess of energy in the main oscillation to higher harmonics, and thus stabilizes its frequency. In this paper, we examine a model for internal resonance in a vibrating elastic beam clamped at its two ends. In this case, nonlinearity occurs in the form of a restoring force proportional to the cube of the oscillation amplitude, which induces resonance between modes whose frequencies are in a ratio close to 1:3. The model is based on a representation of the resonant modes as two Duffing oscillators, coupled through cubic interactions. Our focus is put on illustrating the diversity of behavior that internal resonance brings about in the dynamical response of the system, depending on the detailed form of the coupling forces. The mathematical treatment of the model is developed at several approximation levels. A qualitative comparison of our results with previous experiments and numerical calculations on elastic beams is outlined. PMID:27648829

  12. Global stabilization of high-energy resonance for a nonlinear wideband electromagnetic vibration energy harvester

    Science.gov (United States)

    Masuda, Arata; Sato, Takeru

    2016-04-01

    This paper presents an experimental verification of a wideband nonlinear vibration energy harvester which has a globally stabilized high-energy resonating response. For the conventional linear vibration energy harvester, the maximum performance of the power generation and its bandwidth are in a relation of trade-off. The resonance frequency band can be expanded by introducing a Duffing-type nonlinear resonator in order to enable the harvester to generate larger electric power in a wider frequency range. However, since such nonlinear resonators often have multiple stable steady-state solutions in the resonance band, it is difficult for the nonlinear harvester to maintain the high performance of the power generation constantly. The principle of self-excitation and entrainment has been utilized to provide the global stability to the highest-energy solution by destabilizing other unexpected lower-energy solutions by introducing a switching circuit of the load resistance between positive and the negative values depending on the response amplitude of the oscillator. In this study, an experimental verification of this concept are carried out. An experimental prototype harvester is designed and fabricated and the performance of the proposed harvester is experimentally verified. It has been shown that the numerical and experimental results agreed very well, and the highest-energy solutions above the threshold value were successfully stabilized globally.

  13. Nonlinear free flexural vibrations of functionally graded rectangular and skew plates under thermal environments

    CERN Document Server

    Sundararajan, N; Ganapathi, M; 10.1016/j.finel.2005.06.001

    2011-01-01

    The nonlinear formulation developed based on von Karman's assumptions is employed to study the free vibration characteristics of functionally graded material (FGM) plates subjected to thermal environment. Temperature field is assumed to be a uniform distribution over the plate surface and varied in the thickness direction. The material is assumed to be temperature dependent and graded in the thickness direction according to the power-law distribution in terms of volume fractions of the constituents. The effective material properties are estimated from the volume fractions and the material properties of the constituents using Mori-Tanaka homogenization method. The nonlinear governing equations obtained using Lagrange's equations of motion are solved using finite element procedure coupled with the direct iteration technique. The variation of nonlinear frequency ratio with amplitude is highlighted considering various parameters such as gradient index, temperature, thickness and aspect ratios, and skew angle. For...

  14. Nonlinear free vibration of single walled Carbone NanoTubes conveying fluid

    Directory of Open Access Journals (Sweden)

    Azrar A.

    2014-04-01

    Full Text Available Nonlinear free vibration of single-walled carbon nanotubes (CNTs conveying fluid are modeled and numerically simulated based on von Kármán geometric nonlinearity and Eringen’s nonlocal elasticity theory. The CNTs are modelled as nanobeams where the effects of transverse shear deformation and rotary inertia are considered within the framework of Timoshenko beam theory. The governing equations and boundary conditions are derived using the Hamilton’s principle and the nonlinear equation of motion is solved by the Galerkin’s method. The small scale parameter and the fluid-tube interaction effects on the dynamic behaviours of the CNT-fluid system as well as the instabilities induced by the fluid-velocity can be investigated. The critical fluid-velocity and frequency-amplitude relationships as well as the flutter and divergence instability types and the associated time responses are obtained based on the presented methodological approach.

  15. Nonlinear nonlocal vibration of embedded DWCNT conveying fluid using shell model

    Energy Technology Data Exchange (ETDEWEB)

    Ghorbanpour Arani, A., E-mail: aghorban@kashanu.ac.ir [Faculty of Mechanical Engineering, University of Kashan, Kashan (Iran, Islamic Republic of); Institute of Nanoscience and Nanotechnology, University of Kashan, Kashan (Iran, Islamic Republic of); Zarei, M.Sh.; Amir, S.; Khoddami Maraghi, Z. [Faculty of Mechanical Engineering, University of Kashan, Kashan (Iran, Islamic Republic of)

    2013-02-01

    In this work nonlinear vibration of double-walled carbon nanotube (DWCNT) embedded in an elastic medium and subjected to an axial fluid flow (incompressible and non-viscose) is investigated. The elastic medium is simulated using Pasternak foundation in which adjacent layer interactions are assumed to have been coupled by van der Waals (VdW) force. The higher-order equation of motion is derived using Hamilton's principle and nonlocal-nonlinear shell theory. Galerkin and averaging methods are adopted to solve the higher-order governing equations. Elastic medium, small scale parameter, velocity and fluid density are taken into account to calculate the effects of axial and circumferential wave numbers in this study. Results reveal that increasing circumferential wave number, leads to enhanced nonlinearity. Critical flow velocities of DWCNT are inversely related to the non-local parameter (e{sub 0}a), so that increase in the later lead to reduced critical flow velocities.

  16. On the Nonlinear Behavior of the Piezoelectric Coupling on Vibration-Based Energy Harvesters

    Directory of Open Access Journals (Sweden)

    Luciana L. Silva

    2015-01-01

    Full Text Available Vibration-based energy harvesting with piezoelectric elements has an increasing importance nowadays being related to numerous potential applications. A wide range of nonlinear effects is observed in energy harvesting devices and the analysis of the power generated suggests that they have considerable influence on the results. Linear constitutive models for piezoelectric materials can provide inconsistencies on the prediction of the power output of the energy harvester, mainly close to resonant conditions. This paper investigates the effect of the nonlinear behavior of the piezoelectric coupling. A one-degree of freedom mechanical system is coupled to an electrical circuit by a piezoelectric element and different coupling models are investigated. Experimental tests available in the literature are employed as a reference establishing the best matches of the models. Subsequently, numerical simulations are carried out showing different responses of the system indicating that nonlinear piezoelectric couplings can strongly modify the system dynamics.

  17. Flow-Induced Vibration of A Nonlinearly Restrained Curved Pipe Conveying Fluid

    Institute of Scientific and Technical Information of China (English)

    王琳; 倪樵; 黄玉盈

    2004-01-01

    Investigated in this study is the flow-induced vibration of a nonlinearly restrained curved pipe conveying fluid. The nonlinear equation of motion is derived by equilibrium of forces on microelement of the system under consideration. The spatial coordinate of the system is discretized by DQM (differential quadrature method). On the basis of the boundary conditions, the dynamic equation is solved by the Newton-Raphson iteration method. The numerical solutions reveal several complex dynamic motions for the variation of the fluid velocity parameter, such as limit cycle motion, buckling and so on. The result obtained also shows that the sub parameter regions corresponding to the several motions may change with the variation of some parameters of the curved pipe. The present study supplies a new reference for investigating the nonlinear dynamic response of some other structures.

  18. Identification of nonlinear vibrating structures by polynomial expansion in the z-domain

    Science.gov (United States)

    Fasana, Alessandro; Garibaldi, Luigi; Marchesiello, Stefano

    2017-02-01

    A new method in the frequency domain for the identification of nonlinear vibrating structures is described, by adopting the perspective of nonlinearities as internal feedback forces. The technique is based on a polynomial expansion representation of the frequency response function of the underlying linear system, relying on a z-domain formulation. A least squares approach is adopted to take into account the information of all the frequency response functions but, when large data sets are used, the solution of the resulting system of algebraic linear equations can be a difficult task. A procedure to drastically reduce the matrix dimensions and consequently the computational cost - which largely depends on the number of spectral lines - is adopted, leading to a compact and well conditioned problem. The robustness and numerical performances of the method are demonstrated by its implementation on simulated data from single and two degree of freedom systems with typical nonlinear characteristics.

  19. Fast and slow dynamics in a nonlinear elastic bar excited by longitudinal vibrations

    CERN Document Server

    Favrie, Nicolas; Payan, Cédric

    2014-01-01

    Heterogeneous materials, such as rocks and concrete, have a complex dynamics including hysteresis, nonlinear elasticity and viscoelasticity. It is very sensitive to microstructural changes and damage. The goal of this paper is to propose a physical model describing the longitudinal vibrations of this class of material, and to develop a numerical strategy for solving the evolution equations. The theory relies on the coupling between two processes with radically-different time scales: a fast process at the frequency of the excitation, governed by nonlinear elasticity and viscoelasticity; a slow process, governed by the evolution of defects. The evolution equations are written as a nonlinear hyperbolic system with relaxation. A time-domain numerical scheme is developed, based on a splitting strategy. The numerical simulations show qualitative agreement with the features observed experimentally by Dynamic Acousto-Elastic Testing.

  20. NONLINEAR FLUID DAMPING IN STRUCTURE-WAKE OSCILLATORS IN MODELING VORTEX-INDUCED VIBRATIONS

    Institute of Scientific and Technical Information of China (English)

    LIN Li-ming; LING Guo-can; WU Ying-xiang; ZENG Xiao-hui

    2009-01-01

    A Nonlinear Fluid Damping(NFD)in the form of the square-velocity is applied in the response analysis of Vortex-Induced Vibrations(VIV).Its nonlinear hydrodynamic effects on the coupled wake and structure oscillators are investigated.A comparison between the coupled systems with the linear and nonlinear fluid dampings and experiments shows that the NFD model can well describe response characteristics,such as the amplification of body displacement at lock-in and frequency lock-in,both at high and low mass ratios.Particularly,the predicted peak amplitude of the body in the Griffin plot is in good agreement with experimental data and empirical equation,indicating the significant effect of the NFD on the structure motion.

  1. Aeroelastic analysis for helicopter rotors with blade appended pendulum vibration absorbers. Mathematical derivations and program user's manual

    Science.gov (United States)

    Bielawa, R. L.

    1982-01-01

    Mathematical development is presented for the expanded capabilities of the United Technologies Research Center (UTRC) G400 Rotor Aeroelastic Analysis. This expanded analysis, G400PA, simulates the dynamics of teetered rotors, blade pendulum vibration absorbers and the higher harmonic excitations resulting from prescribed vibratory hub motions and higher harmonic blade pitch control. Formulations are also presented for calculating the rotor impedance matrix appropriate to these higher harmonic blade excitations. This impedance matrix and the associated vibratory hub loads are intended as the rotor blade characteristics elements for use in the Simplified Coupled Rotor/Fuselage Vibration Analysis (SIMVIB). Sections are included presenting updates to the development of the original G400 theory, and material appropriate to the user of the G400PA computer program. This material includes: (1) a general descriptionof the tructuring of the G400PA FORTRAN coding, (2) a detaild description of the required input data and other useful information for successfully running the program, and (3) a detailed description of the output results.

  2. Global Nonlinear Analysis of Piezoelectric Energy Harvesting from Ambient and Aeroelastic Vibrations

    Science.gov (United States)

    Abdelkefi, Abdessattar

    Converting vibrations to a usable form of energy has been the topic of many recent investigations. The ultimate goal is to convert ambient or aeroelastic vibrations to operate low-power consumption devices, such as microelectromechanical systems, heath monitoring sensors, wireless sensors or replacing small batteries that have a finite life span or would require hard and expensive maintenance. The transduction mechanisms used for transforming vibrations to electric power include: electromagnetic, electrostatic, and piezoelectric mechanisms. Because it can be used to harvest energy over a wide range of frequencies and because of its ease of application, the piezoelectric option has attracted significant interest. In this work, we investigate the performance of different types of piezoelectric energy harvesters. The objective is to design and enhance the performance of these harvesters. To this end, distributed-parameter and phenomenological models of these harvesters are developed. Global analysis of these models is then performed using modern methods of nonlinear dynamics. In the first part of this Dissertation, global nonlinear distributed-parameter models for piezoelectric energy harvesters under direct and parametric excitations are developed. The method of multiple scales is then used to derive nonlinear forms of the governing equations and associated boundary conditions, which are used to evaluate their performance and determine the effects of the nonlinear piezoelectric coefficients on their behavior in terms of softening or hardening. In the second part, we assess the influence of the linear and nonlinear parameters on the dynamic behavior of a wing-based piezoaeroelastic energy harvester. The system is composed of a rigid airfoil that is constrained to pitch and plunge and supported by linear and nonlinear torsional and flexural springs with a piezoelectric coupling attached to the plunge degree of freedom. Linear analysis is performed to determine the

  3. Design of Multiple Dynamic Vibration Absorbers for Buffet Control of Vertical Tails%垂尾抖振控制中多重动力吸振器设计

    Institute of Scientific and Technical Information of China (English)

    牛文超; 李斌

    2016-01-01

    Aiming at the need of vertical tail buffet suppression, the eddy current vibration absorber is designed and its parameters is introduced. The optimal design parameters method of the multiple dynamic vibration absorber is deduced to realize the vibration absorber miniaturization. Taking an equivalent cantilever beam system and a scaled vertical tail as the objects respectively for vibration control, considering the actual size of the vibration absorber and the vertical tail, and choosing the reasonable installation position, the vibration absorption effect of the multiple-dynamic-vibration-absorber is verified through the finite element simulation. Simulation results show that the vibration suppression property of the multiple-dynamic-vibration-absorber scheme is very good. Compared to the single large dynamic vibration absorber, the vibration attenuation rate of the quadruple dynamic vibration absorber scheme is increased by 16%, and will be raised by 20%for the ten-dynamic-vibration-absorber scheme.%针对飞机垂尾抖振抑制的需要,进行小型电涡流耗能动力吸振器设计,并推导多重动力吸振器最优参数设计方法。分别以悬臂梁系统和缩比垂尾为被控对象,并考虑动力吸振器与垂尾实际尺寸,选定合理安装位置,通过有限元仿真验证多重动力吸振器吸振性能,仿真结果表明多重动力吸振器具有良好的振动抑制效果,可满足设计预期要求。

  4. ELECTRICALLY FORCED THICKNESS-SHEAR VIBRATIONS OF QUARTZ PLATE WITH NONLINEAR COUPLING TO EXTENSION

    Institute of Scientific and Technical Information of China (English)

    Rongxing Wu; Jiashi Yang; Jianke Du; Ji Wang

    2008-01-01

    We study electrically forced nonlinear thickness-shear vibrations of a quartz plate resonator with relatively large amplitude. It is shown that thickness-shear is nonlinearly coupled to extension due to the well-known Poynting effect in nonlinear elasticity. This coupling is relatively strong when the resonant frequency of the extensional mode is about twice the resonant frequency of the thickness-shear mode. This happens when the plate length/thickness ratio assumes certain values. With this nonlinear coupling, the thickness-shear motion is no longer sinusoidal. Coupling to extension also affects energy trapping which is related to device mounting. When damping is 0.01, nonlinear coupling causes a frequency shift of the order of 10-e which is not insignificant,and an amplitude change of the order of 10-8. The effects are expected to be stronger under real damping of 10-5 or larger. To avoid nonlinear coupling to extension, certain values of the aspect ratio of the plate should be avoided.

  5. Regarding "A new method for predicting nonlinear structural vibrations induced by ground impact loading" [Journal of Sound and Vibration, 331/9 (2012) 2129-2140

    Science.gov (United States)

    Cartmell, Matthew P.

    2016-09-01

    The Editor wishes to make the reader aware that the paper "A new method for predicting nonlinear structural vibrations induced by ground impact loading" by Jun Liu, Yu Zhang, Bin Yun, Journal of Sound and Vibration, 331 (2012) 2129-2140, did not contain a direct citation of the fundamental and original work in this field by Dr. Mark Svinkin. The Editor regrets that this omission was not noted at the time that the above paper was accepted and published.

  6. Stochastic analysis of laminated composite plates on elastic foundation: The cases of post-buckling behavior and nonlinear free vibration

    Energy Technology Data Exchange (ETDEWEB)

    Singh, B.N., E-mail: bnsingh@aero.iitkgp.ernet.i [Department of Aerospace Engineering, IIT Kharagpur 721 302, West Bengal (India); Lal, Achchhe [Department of Mechanical Engineering, SVNIT, Surat 395007 (India)

    2010-10-15

    This study deals with the stochastic post-buckling and nonlinear free vibration analysis of a laminated composite plate resting on a two parameters Pasternak foundation with Winkler cubic nonlinearity having uncertain system properties. The system properties are modeled as basic random variables. A C{sup 0} nonlinear finite element formulation of the random problem based on higher-order shear deformation theory in the von Karman sense is presented. A direct iterative method in conjunction with a stochastic nonlinear finite element method proposed earlier by the authors is extended to analyze the effect of uncertainty in system properties on the post-buckling and nonlinear free vibration of the composite plates having Winler type of geometric nonlinearity. Mean as well as standard deviation of the responses have been obtained for various combinations of geometric parameters, foundation parameters, stacking sequences and boundary conditions and compared with those available in the literature and Monte Carlo simulation.

  7. Wide operation frequency band magnetostrictive vibration power generator using nonlinear spring constant by permanent magnet

    Science.gov (United States)

    Furumachi, S.; Ueno, T.

    2016-04-01

    We study magnetostrictive vibration based power generator using iron-gallium alloy (Galfenol). The generator is advantages over conventional, such as piezoelectric material in the point of high efficiency highly robust and low electrical impedance. Generally, the generator exhibits maximum power when its resonant frequency matches the frequency of ambient vibration. In other words, the mismatch of these frequencies results in significant decrease of the output. One solution is making the spring characteristics nonlinear using magnetic force, which distorts the resonant peak toward higher or lower frequency side. In this paper, vibrational generator consisting of Galfenol plate of 6 by 0.5 by 13 mm wound with coil and U shape-frame accompanied with plates and pair of permanent magnets was investigated. The experimental results show that lean of resonant peak appears attributed on the non-linear spring characteristics, and half bandwidth with magnets is 1.2 times larger than that without. It was also demonstrated that the addition of proof mass is effective to increase the sensitivity but also the bandwidth. The generator with generating power of sub mW order is useful for power source of wireless heath monitoring for bridge and factory machine.

  8. Non-linear vibrational modes in biomolecules: A periodic orbits description

    Energy Technology Data Exchange (ETDEWEB)

    Kampanarakis, Alexandros [Department of Chemistry, University of Crete, and Institute of Electronic Structure and Laser, Foundation for Research and Technology-Hellas (FORTH), Vasilika Vouton, Heraklion 71110, Crete (Greece); Farantos, Stavros C., E-mail: farantos@iesl.forth.gr [Department of Chemistry, University of Crete, and Institute of Electronic Structure and Laser, Foundation for Research and Technology-Hellas (FORTH), Vasilika Vouton, Heraklion 71110, Crete (Greece); Daskalakis, Vangelis; Varotsis, Constantinos [Department of Environmental Science and Technology, Cyprus University of Technology, 31 Archbishop Kyprianos St., P.O. Box 50329, 3603 Lemesos (Cyprus)

    2012-05-03

    Graphical abstract: Vibrational frequency shifts in Fe{sup IV} = O species of the active site of cytochrome c oxidase are attributed to changes in the surrounding Coulomb field. Periodic orbits analysis assists to find the most anharmonic modes in model biomolecules. Highlights: Black-Right-Pointing-Pointer Periodic orbits are extended to multidimensional potentials of biomolecules. Black-Right-Pointing-Pointer Highly anharmonic vibrational modes and center-saddle bifurcations are detected. Black-Right-Pointing-Pointer Vibrational frequencies shifts in Oxoferryl species of CcO are observed. - Abstract: The vibrational harmonic normal modes of a molecule, which are valid at energies close to an equilibrium point (a minimum, maximum or saddle of the potential energy surface), are extended by periodic orbits to high energies where anharmonicity and coupling of the degrees of freedom are significant. In this way the assignment of the spectra, and thus the extraction of dynamics in highly excited molecules, can be obtained. New vibrational modes emanating from bifurcations of periodic orbits and long living localized trajectories signal the birth and localization of new quantum states. In this article we review and further study non-linear vibrational modes for model biomolecules such as alanine dipeptide and the active site in the oxoferryl oxidation state of the enzyme cytochrome c oxidase. We locate periodic orbits which exhibit high anhamonicity and lead to center-saddle bifurcations. These modes are associated to an isomerization process in alanine dipeptide and to frequency shifts in the oxoferryl observed by modifying the Coulomb field around the Imidazole-Fe{sup IV} = O species.

  9. Nonlinear vibrations of shallow shells with complex boundary: R-functions method and experiments

    Science.gov (United States)

    Kurpa, Lidia; Pilgun, Galina; Amabili, Marco

    2007-10-01

    Geometrically nonlinear vibrations of shallow circular cylindrical panels with complex shape of the boundary are considered. The R-functions theory and variational methods are used to study the problem. The R-functions method (RFM) allows constructing in analytical form the sequence of basis functions satisfying the given boundary conditions in case of complex shape of the boundary. The problem is reduced to a single second-order differential equation with quadratic and cubic nonlinear terms. The method developed has been initially applied to study free vibrations of shallow circular cylindrical panels with rectangular base for different boundary conditions: (i) clamped edges, (ii) in-plane immovable simply supported edges, (iii) classically simply supported edges, and (iv) in-plane free simply supported edges. Then, the same approach is applied to a shell with complex shape of the boundary. Experiments have been conducted on an aluminum panel with complex shape of the boundary in order to identify the nonlinear response of the fundamental mode; these experimental results have been compared to numerical results.

  10. Residual mode correction in calibrating nonlinear damper for vibration control of flexible structures

    Science.gov (United States)

    Sun, Limin; Chen, Lin

    2017-10-01

    Residual mode correction is found crucial in calibrating linear resonant absorbers for flexible structures. The classic modal representation augmented with stiffness and inertia correction terms accounting for non-resonant modes improves the calibration accuracy and meanwhile avoids complex modal analysis of the full system. This paper explores the augmented modal representation in calibrating control devices with nonlinearity, by studying a taut cable attached with a general viscous damper and its Equivalent Dynamic Systems (EDSs), i.e. the augmented modal representations connected to the same damper. As nonlinearity is concerned, Frequency Response Functions (FRFs) of the EDSs are investigated in detail for parameter calibration, using the harmonic balance method in combination with numerical continuation. The FRFs of the EDSs and corresponding calibration results are then compared with those of the full system documented in the literature for varied structural modes, damper locations and nonlinearity. General agreement is found and in particular the EDS with both stiffness and inertia corrections (quasi-dynamic correction) performs best among available approximate methods. This indicates that the augmented modal representation although derived from linear cases is applicable to a relatively wide range of damper nonlinearity. Calibration of nonlinear devices by this means still requires numerical analysis while the efficiency is largely improved owing to the system order reduction.

  11. Geometric nonlinear free vibration of axially functionally graded non-uniform beams supported on elastic foundation

    Science.gov (United States)

    Lohar, Hareram; Mitra, Anirban; Sahoo, Sarmila

    2016-09-01

    In the present study non-linear free vibration analysis is performed on a tapered Axially Functionally Graded (AFG) beam resting on an elastic foundation with different boundary conditions. Firstly the static problem is carried out through an iterative scheme using a relaxation parameter and later on the subsequent dynamic problem is solved as a standard eigen value problem. Minimum potential energy principle is used for the formulation of the static problem whereas for the dynamic problem Hamilton's principle is utilized. The free vibrational frequencies are tabulated for different taper profile, taper parameter and foundation stiffness. The dynamic behaviour of the system is presented in the form of backbone curves in dimensionless frequency-amplitude plane.

  12. Nonlinear vibration and buckling of circular sandwich plate under complex load

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The nonlinear vibration fundamental equation of circular sandwich plate under uniformed load and circumjacent load and the loosely clamped boundary condition were established by von Karman plate theory, and then accordingly exact solution of static load and its numerical results were given. Based on time mode hypothesis and the variational method, the control equation of the space mode was derived, and then the amplitude frequency-load character relation of circular sandwich plate was obtained by the modified iteration method. Consequently the rule of the effect of the two kinds of load on the vibration character of the circular sandwich plate was investigated. When circumjacent load makes the lowest natural frequency zero, critical load is obtained.

  13. Suppression of chaotic vibrations in a nonlinear half-car model

    Science.gov (United States)

    Tusset, Ángelo Marcelo; Piccirillo, Vinícius; Janzen, Frederic Conrad; Lenz, Wagner Barth; Balthazar, José Manoel; da Fonseca Brasil, Reyolando M. L. R.

    2014-12-01

    The present work investigates the nonlinear response of a half-car model. The disturbances of the road are assumed to be sinusoidal. After constructing the bifurcation diagram, we using the 0-1 test for identify the chaotic motion. The principal objective of this study is to eliminate the chaotic behaviour of the chassis and reduce its vibration, and for this reason a control system for semi-active vehicle suspension with magnetorheological damper is proposed. The control mechanism is designed based on SDRE technique, where the control parameter is the voltage applied to the coil of the damper. Numerical results show that the proposed control method is effective in significantly reducing of the chassis vibration, increasing therefore, passenger comfort.

  14. Suppression of chaotic vibrations in a nonlinear half-car model

    Energy Technology Data Exchange (ETDEWEB)

    Tusset, Ângelo Marcelo, E-mail: tusset@utfpr.edu.br, E-mail: piccirillo@utfpr.edu.br, E-mail: fcjanzen@utfpr.edu.br, E-mail: wagner-barth@hotmail.com; Piccirillo, Vinícius, E-mail: tusset@utfpr.edu.br, E-mail: piccirillo@utfpr.edu.br, E-mail: fcjanzen@utfpr.edu.br, E-mail: wagner-barth@hotmail.com; Janzen, Frederic Conrad, E-mail: tusset@utfpr.edu.br, E-mail: piccirillo@utfpr.edu.br, E-mail: fcjanzen@utfpr.edu.br, E-mail: wagner-barth@hotmail.com; Lenz, Wagner Barth, E-mail: tusset@utfpr.edu.br, E-mail: piccirillo@utfpr.edu.br, E-mail: fcjanzen@utfpr.edu.br, E-mail: wagner-barth@hotmail.com [UTFPR- PONTA GROSSA, PR (Brazil); Balthazar, José Manoel, E-mail: jmbaltha@rc.unesp.br [UNESP-BAURU, SP (Brazil); Fonseca Brasil, Reyolando M. L. R. da, E-mail: reyolando.brasil@ufabc.edu.br [UFABC-SANTO ANDRE, SP (Brazil)

    2014-12-10

    The present work investigates the nonlinear response of a half-car model. The disturbances of the road are assumed to be sinusoidal. After constructing the bifurcation diagram, we using the 0-1 test for identify the chaotic motion. The principal objective of this study is to eliminate the chaotic behaviour of the chassis and reduce its vibration, and for this reason a control system for semi-active vehicle suspension with magnetorheological damper is proposed. The control mechanism is designed based on SDRE technique, where the control parameter is the voltage applied to the coil of the damper. Numerical results show that the proposed control method is effective in significantly reducing of the chassis vibration, increasing therefore, passenger comfort.

  15. Robust energy harvesting from walking vibrations by means of nonlinear cantilever beams

    Science.gov (United States)

    Kluger, Jocelyn M.; Sapsis, Themistoklis P.; Slocum, Alexander H.

    2015-04-01

    In the present work we examine how mechanical nonlinearity can be appropriately utilized to achieve strong robustness of performance in an energy harvesting setting. More specifically, for energy harvesting applications, a great challenge is the uncertain character of the excitation. The combination of this uncertainty with the narrow range of good performance for linear oscillators creates the need for more robust designs that adapt to a wider range of excitation signals. A typical application of this kind is energy harvesting from walking vibrations. Depending on the particular characteristics of the person that walks as well as on the pace of walking, the excitation signal obtains completely different forms. In the present work we study a nonlinear spring mechanism that is composed of a cantilever wrapping around a curved surface as it deflects. While for the free cantilever, the force acting on the free tip depends linearly on the tip displacement, the utilization of a contact surface with the appropriate distribution of curvature leads to essentially nonlinear dependence between the tip displacement and the acting force. The studied nonlinear mechanism has favorable mechanical properties such as low frictional losses, minimal moving parts, and a rugged design that can withstand excessive loads. Through numerical simulations we illustrate that by utilizing this essentially nonlinear element in a 2 degrees-of-freedom (DOF) system, we obtain strongly nonlinear energy transfers between the modes of the system. We illustrate that this nonlinear behavior is associated with strong robustness over three radically different excitation signals that correspond to different walking paces. To validate the strong robustness properties of the 2DOF nonlinear system, we perform a direct parameter optimization for 1DOF and 2DOF linear systems as well as for a class of 1DOF and 2DOF systems with nonlinear springs similar to that of the cubic spring that are physically realized

  16. Advanced non-linear flow-induced vibration and fretting-wear analysis capabilities

    Energy Technology Data Exchange (ETDEWEB)

    Toorani, M.; Pan, L.; Li, R.; Idvorian, N. [Babcock and Wilcox Canada Ltd., Cambridge, Ontario (Canada); Vincent, B.

    2009-07-01

    Fretting wear is a potentially significant degradation mechanism in nuclear steam generators and other shell and tube heat transfer equipment as well. This paper presents an overview of the recently developed code FIVDYNA which is used for the non-linear flow-induced vibration and fretting wear analysis for operating steam generators (OTSG and RSG) and shell-and-tube heat exchangers. FIVDYNA is a non-linear time-history Flow-Induced Vibration (FIV) analysis computer program that has been developed by Babcock and Wilcox Canada to advance the understanding of tube vibration and tube to tube-support interaction. In addition to the dynamic fluid induced forces the program takes into account other tube static forces due to axial and lateral tube preload and thermal interaction loads. The program is capable of predicting the location where the fretting wear is most likely to occur and its magnitude taking into account the support geometry including gaps. FIVDYNA uses the general purpose finite element computer code ABAQUS as its solver. Using ABAQUS gives the user the flexibility to add additional forces to the tube ranging from tube preloads and the support offsets to thermal loads. The forces currently being modeled in FIVDYNA are the random turbulence, steady drag force, fluid-elastic forces, support offset and pre-strain force (axial loads). This program models the vibration of tubes and calculates the structural dynamic characteristics, and interaction forces between the tube and the tube supports. These interaction forces are then used to calculate the work rate at the support and eventually the predicted depth of wear scar on the tube. A very good agreement is found with experiments and also other computer codes. (author)

  17. Unified approach to split absorbing boundary conditions for nonlinear Schrödinger equations: Two-dimensional case.

    Science.gov (United States)

    Zhang, Jiwei; Xu, Zhenli; Wu, Xiaonan

    2009-04-01

    This paper aims to design local absorbing boundary conditions (LABCs) for the two-dimensional nonlinear Schrödinger equations on a rectangle by extending the unified approach. Based on the time-splitting idea, the main process of the unified approach is to approximate the kinetic energy part by a one-way equation, unite it with the potential energy equation, and then obtain the well-posed and accurate LABCs on the artificial boundaries. In the corners, we use the (1,1)-Padé approximation to the kinetic term and also unite it with the nonlinear term to give some local corner boundary conditions. Numerical tests are given to verify the stable and tractable advantages of the method.

  18. On Approximate Analytical Solutions of Nonlinear Vibrations of Inextensible Beams using Parameter-Expansion Method

    DEFF Research Database (Denmark)

    Kimiaeifar, Amin; Lund, Erik; Thomsen, Ole Thybo;

    2010-01-01

    In this work, an analytical method, which is referred to as Parameter-expansion Method is used to obtain the exact solution for the problem of nonlinear vibrations of an inextensible beam. It is shown that one term in the series expansion is sufficient to obtain a highly accurate solution, which ...... is valid for the whole domain of the problem. A comparison of the obtained the numerical solution demonstrates that PEM is effective and convenient for solving such problems. After validation of the obtained results, the system response and stability are also discussed....

  19. Nonlinear vibrations of cylindrical shells with initial imperfections in a supersonic flow

    Science.gov (United States)

    Kurilov, E. A.; Mikhlin, Yu. V.

    2007-09-01

    The paper studies the dynamics of nonlinear elastic cylindrical shells using the theory of shallow shells. The aerodynamic pressure on the shell in a supersonic flow is found using piston theory. The effect of the flow and initial deflections on the vibrations of the shell is analyzed in the flutter range. The normal modes of both perfect shells in a flow and shells with initial imperfections are studied. In the latter case, the trajectories of normal modes in the configuration space are nearly rectilinear, only one mode determined by the initial imperfections being stable

  20. Communication: atomic force detection of single-molecule nonlinear optical vibrational spectroscopy.

    Science.gov (United States)

    Saurabh, Prasoon; Mukamel, Shaul

    2014-04-28

    Atomic Force Microscopy (AFM) allows for a highly sensitive detection of spectroscopic signals. This has been first demonstrated for NMR of a single molecule and recently extended to stimulated Raman in the optical regime. We theoretically investigate the use of optical forces to detect time and frequency domain nonlinear optical signals. We show that, with proper phase matching, the AFM-detected signals closely resemble coherent heterodyne-detected signals. Applications are made to AFM-detected and heterodyne-detected vibrational resonances in Coherent Anti-Stokes Raman Spectroscopy (χ((3))) and sum or difference frequency generation (χ((2))).

  1. 电涡流耗能动力吸振器设计与试验研究%Eddy Current Vibration Absorber Design and Experiments

    Institute of Scientific and Technical Information of China (English)

    李斌; 牛文超; 徐兆懿

    2016-01-01

    针对飞机垂尾抖振抑制的需要,提出一种空间布局紧凑、基于非接触式电涡流耗能机理、阻尼可设计的动力吸振器设计方案。电涡流耗能机制的引入保证该动力吸振器具有良好的环境适应性、耐久性和可靠性。基于电磁场理论,建立了电涡流阻尼力的计算模型,获得电磁阻尼的设计规律,通过与试验结果对比,验证了电涡流阻尼模型的准确性。并以等效悬臂梁结构为对象,应用最优参数设计原理确定动力吸振器参数,设计制造了动力吸振器样机。试验结果表明,该电涡流动力吸振器具有良好的吸振性能,最大减幅比可达98%。%Aiming at the need of vertical tail buffet suppression, a design scheme of dynamic vibration absorber with compact layout and adjustable damping is proposed; this is based on the mechanism of eddy current energy dissipation. Eddy current energy dissipation can ensure that the dynamic vibration absorber has good environmental adaptability, durability and reliability. Based on the electromagnetic theory, the calculation model of eddy current damping force is established and the design rule of eddy damping force is concluded. Through the comparison be⁃tween the calculations and the experiments, the validation and accuracy of eddy current damping force model are verified. Taking an equivalent cantilever beam system as the object of vibration control, and on the basis of the the⁃ory of dynamic vibration absorber optimal design, we determined the optimal parameters of dynamic vibration ab⁃sorber and completed the design and manufacture of eddy current dynamic vibration absorber prototype. Experimen⁃tal results show that the maximum amplitude of cantilever beam can be decreased at most by 98%, and the pro⁃posed eddy current dynamic vibration absorber has obvious vibration-absorption effect.

  2. Vibrational and third-order nonlinear optical study on hydroxyethylammonium picrate (HEAP) single crystals

    Science.gov (United States)

    Sudharsana, N.; Nagalakshmi, R.; Krishnakumar, V.; Sharma, A.; Fausto, R.; Row, T. N. Guru; Pal, Rumpa

    2012-06-01

    Single crystals of hydroxyethylammonium picrate (C8 H10N4O8; HEAP) have been grown for the first time by slow evaporation solution growth technique at room temperature, using ethanol as solvent. FT-IR and Raman spectra were recorded for HEAP at room temperature. The main vibrational bands related to NH3+ and CO- (picrate) groups, involved in charge transfer, are discussed. Second-order hyperpolarizability(γ) for the single crystal was evaluated theoretically to be 3.48×10-28 e.s.u. A Z-scan study of HEAP showed that the relative third-order nonlinear refractive index is -9.2×10-5cm2/W. The measured third-order nonlinear properties confirm the suitability of the crystal for optical limiting and switching applications.

  3. Design and Experimental Implementation of a Beam-Type Twin Dynamic Vibration Absorber for a Cantilevered Flexible Structure Carrying an Unbalanced Rotor: Numerical and Experimental Observations

    Directory of Open Access Journals (Sweden)

    Abdullah Özer

    2015-01-01

    Full Text Available This paper presents experimental and numerical results about the effectiveness of a beam-type twin dynamic vibration absorber for a cantilevered flexible structure carrying an unbalanced rotor. An experimental laboratory prototype setup has been built and implemented in our laboratory and numerical investigations have been performed through finite element analysis. The proposed system design consists of a primary cantilevered flexible structure with an attached dual-mass cantilevered secondary dynamic vibration absorber arrangement. In addition, an unbalanced rotor system is attached to the tip of the flexible cantilevered structure to inspect the system response under harmonic excitations. Numerical findings and experimental observations have revealed that significant vibration reductions are possible with the proposed dual-mass, cantilevered dynamic vibration absorber on a flexible cantilevered platform carrying an unbalanced rotor system at its tip. The proposed system is efficient and it can be practically tuned for variety of design and operating conditions. The designed setup and the results in this paper can serve for practicing engineers, researchers and can be used for educational purposes.

  4. Nonlinear estimation of coherent phase vibrations for statistical signals through multivariable analyses

    Science.gov (United States)

    Deng, Linhua

    2015-07-01

    Three nonlinear analysis techniques, including cross-recurrence plot, line of synchronization, and cross-wavelet transform, are proposed to estimate the coherent phase vibrations of nonlinear and non-stationary time series. The case study utilizes the monthly averages of sunspot areas during the time interval from May 1874 to August 2014. The following prominent results are found: (1) the phase-leading hemisphere of long-term sunspot areas has changed twice in the past 140 years, indicating that the hemispheric imbalances and apparent phase differences on both hemispheres are a prevalent behavior and are not anomalous; (2) the alternating regularity of hemispheric asynchronism exhibits a cyclical pattern of 4.5+3.5 cycles, and the magnetic flux excess in a certain hemisphere during the ascending branch of a cycle can be taken as an indication of the phase-leading hemisphere in this cycle. We firmly believe that powerful nonlinear approaches are more advanced than classical linear methods when they are combined to determine the dynamic complexity of nonlinear physical systems.

  5. Supercritical Nonlinear Vibration of a Fluid-Conveying Pipe Subjected to a Strong External Excitation

    Directory of Open Access Journals (Sweden)

    Yan-Lei Zhang

    2016-01-01

    Full Text Available Nonlinear vibration of a fluid-conveying pipe subjected to a transverse external harmonic excitation is investigated in the case with two-to-one internal resonance. The excitation amplitude is in the same magnitude of the transverse displacement. The fluid in the pipes flows in the speed larger than the critical speed so that the straight configuration becomes an unstable equilibrium and two curved configurations bifurcate as stable equilibriums. The motion measured from each of curved equilibrium configurations is governed by a nonlinear integro-partial-differential equation with variable coefficients. The Galerkin method is employed to discretize the governing equation into a gyroscopic system consisting of a set of coupled nonlinear ordinary differential equations. The method of multiple scales is applied to analyze approximately the gyroscopic system. A set of first-order ordinary differential equations governing the modulations of the amplitude and the phase are derived via the method. In the supercritical regime, the subharmonic, superharmonic, and combination resonances are examined in the presence of the 2 : 1 internal resonance. The steady-state responses and their stabilities are determined. The various jump phenomena in the amplitude-frequency response curves are demonstrated. The effects of the viscosity, the excitation amplitude, the nonlinearity, and the flow speed are observed. The analytical results are supported by the numerical integration.

  6. Influence of nanoscale temperature rises on photoacoustic generation: Discrimination between optical absorbers based on thermal nonlinearity at high frequency.

    Science.gov (United States)

    Simandoux, Olivier; Prost, Amaury; Gateau, Jérôme; Bossy, Emmanuel

    2015-03-01

    In this work, we experimentally investigate thermal-based nonlinear photoacoustic generation as a mean to discriminate between different types of absorbing particles. The photoacoustic generation from solutions of dye molecules and gold nanospheres (same optical densities) was detected using a high frequency ultrasound transducer (20 MHz). Photoacoustic emission was observed with gold nanospheres at low fluence for an equilibrium temperature around 4 °C, where the linear photoacoustic effect in water vanishes, highlighting the nonlinear emission from the solution of nanospheres. The photoacoustic amplitude was also studied as a function of the equilibrium temperature from 2 °C to 20 °C. While the photoacoustic amplitude from the dye molecules vanished around 4 °C, the photoacoustic amplitude from the gold nanospheres remained significant over the whole temperature range. Our preliminary results suggest that in the context of high frequency photoacoustic imaging, nanoparticles may be discriminated from molecular absorbers based on nanoscale temperature rises.

  7. Low-frequency vibration modulation of guided waves to image nonlinear scatterers for structural health monitoring

    Science.gov (United States)

    Jiao, J. P.; Drinkwater, B. W.; Neild, S. A.; Wilcox, P. D.

    2009-06-01

    Guided wave structural health monitoring offers the prospect of continuous interrogation of large plate-like structures with a sparse network of permanently attached sensors. Currently, the most common approach is to monitor changes in the received signals by subtraction from a reference signal obtained when the structure was known to be defect-free. In this paper a comparison is made between this defect-free subtraction approach and a technique in which low-frequency vibration modulation of guided wave signals is used to detect nonlinear scatterers. The modulation technique potentially overcomes the need for the defect-free reference measurement as the subtraction is now made between different parts of an externally applied low-frequency vibration. Linear defects were simulated by masses bonded onto a plate and nonlinear scatterers were simulated by loading a similar mass against the plate. The experimental results show that the defect-free subtraction technique performs well in detecting the bonded mass whereas the modulation technique is able to discriminate between the bonded and loaded masses. Furthermore, because the modulation technique does not require a defect-free reference, it is shown to be relatively independent of temperature effects, a significant problem for reference based subtraction techniques.

  8. Nonlinear TeraHertz Coherent Excitation of Vibrational Modes of Liquids

    CERN Document Server

    Allodi, Marco A; Blake, Geoffrey A

    2015-01-01

    We report the first coherent excitation of intramolecular vibrational modes via the nonlinear interaction of a TeraHertz (THz) light field with molecular liquids. A TeraHertz-TeraHertz-Raman pulse sequence prepares the coherences with a broadband, high-energy, (sub)picosecond TeraHertz pulse, that are then measured in a TeraHertz Kerr effect spectrometer via phase-sensitive, heterodyne detection with an optical pulse. The spectrometer reported here has broader TeraHertz frequency coverage and an increased sensitivity relative to previously reported TeraHertz Kerr effect experiments. Vibrational coherences are observed in liquid diiodomethane at 3.66 THz (122 cm$^{-1}$), and in carbon tetrachloride at 6.50 THz (217 cm$^{-1}$), in exact agreement with literature values of those intramolecular modes. This work opens the door to 2D spectroscopies, nonlinear in TeraHertz field, that can study the dynamics of condensed-phase molecular systems, as well as coherent control at TeraHertz frequencies.

  9. Dynamic acousto-elastic test using continuous probe wave and transient vibration to investigate material nonlinearity.

    Science.gov (United States)

    Eiras, J N; Vu, Q A; Lott, M; Payá, J; Garnier, V; Payan, C

    2016-07-01

    This study demonstrates the feasibility of the dynamic acousto-elastic effect of a continuous high frequency wave for investigating the material nonlinearity upon transient vibration. The approach is demonstrated on a concrete sample measuring 15×15×60cm(3). Two ultrasonic transducers (emitter and receiver) are placed at its middle span. A continuous high frequency wave of 500kHz propagates through the material and is modulated with a hammer blow. The position of the hammer blow on the sample is configured to promote the first bending mode of vibration. The use of a continuous wave allows discrete time extraction of the nonlinear behavior by a short-time Fourier transform approach, through the simultaneous comparison of a reference non-modulated signal and an impact-modulated signal. The hammer blow results in phase shifts and variations of signal amplitude between reference and perturbed signals, which are driven by the resonant frequency of the sample. Finally, a comprehensive analysis of the relaxation mechanisms (modulus and attenuation recovery) is conducted to untangle the coupled fast and slow hysteretic effects. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Orientation determination of protein helical secondary structures using linear and nonlinear vibrational spectroscopy.

    Science.gov (United States)

    Nguyen, Khoi Tan; Le Clair, Stéphanie V; Ye, Shuji; Chen, Zhan

    2009-09-10

    In this paper, we systematically presented the orientation determination of protein helical secondary structures using vibrational spectroscopic methods, particularly, nonlinear sum frequency generation (SFG) vibrational spectroscopy, along with linear vibrational spectroscopic techniques such as infrared spectroscopy and Raman scattering. SFG amide I signals can be collected using different polarization combinations of the input laser beams and output signal beam to measure the second-order nonlinear optical susceptibility components of the helical amide I modes, which are related to their molecular hyperpolarizability elements through the orientation distribution of these helices. The molecular hyperpolarizability elements of amide I modes of a helix can be calculated based on the infrared transition dipole moment and Raman polarizability tensor of the helix; these quantities are determined by using the bond additivity model to sum over the individual infrared transition dipole moments and Raman polarizability tensors, respectively, of the peptide units (or the amino acid residues). The computed overall infrared transition dipole moment and Raman polarizability tensor of a helix can be validated by experimental data using polarized infrared and polarized Raman spectroscopy on samples with well-aligned helical structures. From the deduced SFG hyperpolarizability elements and measured SFG second-order nonlinear susceptibility components, orientation information regarding helical structures can be determined. Even though such orientation information can also be measured using polarized infrared or polarized Raman amide I signals, SFG has a much lower detection limit, which can be used to study the orientation of a helix when its surface coverage is much lower than a monolayer. In addition, the combination of different vibrational spectroscopic techniques, for example, SFG and attenuated total reflectance Fourier transform infrared spectroscopy, provides more

  11. Multirate Simulations of String Vibrations Including Nonlinear Fret-String Interactions Using the Functional Transformation Method

    Directory of Open Access Journals (Sweden)

    R. Rabenstein

    2004-06-01

    Full Text Available The functional transformation method (FTM is a well-established mathematical method for accurate simulations of multidimensional physical systems from various fields of science, including optics, heat and mass transfer, electrical engineering, and acoustics. This paper applies the FTM to real-time simulations of transversal vibrating strings. First, a physical model of a transversal vibrating lossy and dispersive string is derived. Afterwards, this model is solved with the FTM for two cases: the ideally linearly vibrating string and the string interacting nonlinearly with the frets. It is shown that accurate and stable simulations can be achieved with the discretization of the continuous solution at audio rate. Both simulations can also be performed with a multirate approach with only minor degradations of the simulation accuracy but with preservation of stability. This saves almost 80% of the computational cost for the simulation of a six-string guitar and therefore it is in the range of the computational cost for digital waveguide simulations.

  12. Nonlinear coupled rotor-fuselage helicopter vibration studies with higher harmonic control

    Science.gov (United States)

    Friedmann, P. P.; Venkatesan, C.; Papavassiliou, I.

    1990-01-01

    This paper addresses the problem of vibration prediction and vibration reduction in helicopters by means of active control methodologies. The nonlinear equations of a coupled rotor/flexible-fuselage system have been derived using computer algebra, thus relegating this tedious task to the computer. In the solution procedure the trim state and vibratory response of the helicopter are obtained in a single pass by using a harmonic balance technique and simultaneously satisfying the trim and the vibratory response of the helicopter in all the rotor and fuselage degrees of freedom. Using this solution procedure, the influence of the fuselage flexibility on the vibratory response is studied. In addition, it is shown that the conventional single frequency HHC is capable of reducing either the hub loads or only the fuselage vibrations but not both simultaneously. A new scheme called MHHC, having multiple higher harmonic pitch inputs, was used to accomplish this task of simultaneously reducing both the vibratory hub loads and fuselage vibratory response. In addition, the uniqueness of this MHHC scheme is explained in detail.

  13. Energetics and conserved quantity of an axially moving string undergoing three-dimensional nonlinear vibration

    Institute of Scientific and Technical Information of China (English)

    Liqun Chen; C.W.Lim; Hu Ding

    2008-01-01

    Nonlinear three-dimensional vibration of axially moving strings is investigated in the view of energetics. The governing equation is derived from the Eulerian equation of motion of a continuum for axially accelerating strings. The time-rate of the total mechanical energy associated with the vibration is calculated for the string with its ends moving in a prescribed way. For a string moving in a constant axial speed and constrained by two fixed ends, a conserved quan-tity is proved to remain unchanged during three-dimensional vibration, while the string energy is not conserved. An approximate conserved quantity is derived from the con-served quantity in the neighborhood of the straight equilib-rium configuration. The approximate conserved quantity is applied to verify the Lyapunov stability of the straight equi-librium configuration. Numerical simulations are performed for a rubber string and a steel string. The results demonstrate the variation of the total mechanical energy and the invari-ance of the conserved quantity.

  14. Chaotic vibration of the one-dimensional linear wave equation with a van der Pol nonlinear boundary condition

    Institute of Scientific and Technical Information of China (English)

    Guogang LIU; Yi ZHAO

    2004-01-01

    The one-dimensional linear wave equation with a van der Pol nonlinear boundary condition is one of the simplest models that may cause isotropic or nonisotropic chaotic vibrations.It characterizes the nonisotropic chaotic vibration by means of the total variation theory.Some results are derived on the exponential growth of total variation of the snapshots on the spatial interval in the long-time horizon when the map and the initial condition satisfy some conditions.

  15. Crystal studies, vibrational spectra and non-linear optical properties of L-histidine chloride monohydrate.

    Science.gov (United States)

    Ben Ahmed, A; Feki, H; Abid, Y; Boughzala, H; Minot, C

    2010-01-01

    This paper presents the results of our calculations on the geometric parameters, vibrational spectra and hyperpolarizability of a non-linear optical material L-histidine chloride monohydrate. Due to the lack of sufficiently precise information on geometric parameters available in literature, theoretical calculations were preceded by re-determination of the crystal X-ray structure. Single crystal of L-histidine chloride monohydrate has been growing by slow evaporation of an aqueous solution at room temperature. The compound crystallizes in the non-Centro-symmetric space group P2(1)2(1)2(1) of orthorhombic system. IR spectrum has been recorded in the range [400-4000 cm(-1)]. All the experimental vibrational bands have been discussed and assigned to normal mode or to combinations on the basis of our calculations. The optimized geometric bond lengths and bond angles obtained by using DFT//B3LYP/6-31G (d) method show a good agreement with the experimental data. The calculated vibrational spectra are in well agreement with the experimental one. To investigate microscopic second-order non-linear optical NLO behavior of the examined complex, the electric dipole mu, the polarizability alpha and the hyperpolarizability beta were computed using DFT//B3LYP/6-31G (d) method. The time-dependent density functional theory (TD-DFT) was employed to descript the molecular electron structure of the title compound using the B3LYP/6-31G (d) method. According to our calculations, L-histidine chloride monohydrate exhibits non-zero beta value revealing microscopic second-order NLO behavior. Copyright 2009 Elsevier B.V. All rights reserved.

  16. Crystal studies, vibrational spectra and non-linear optical properties of L-histidine chloride monohydrate

    Science.gov (United States)

    Ahmed, A. Ben; Feki, H.; Abid, Y.; Boughzala, H.; Minot, C.

    2010-01-01

    This paper presents the results of our calculations on the geometric parameters, vibrational spectra and hyperpolarizability of a non-linear optical material L-histidine chloride monohydrate. Due to the lack of sufficiently precise information on geometric parameters available in literature, theoretical calculations were preceded by re-determination of the crystal X-ray structure. Single crystal of L-histidine chloride monohydrate has been growing by slow evaporation of an aqueous solution at room temperature. The compound crystallizes in the non-Centro-symmetric space group P2 12 12 1 of orthorhombic system. IR spectrum has been recorded in the range [400-4000 cm -1]. All the experimental vibrational bands have been discussed and assigned to normal mode or to combinations on the basis of our calculations. The optimized geometric bond lengths and bond angles obtained by using DFT//B3LYP/6-31G (d) method show a good agreement with the experimental data. The calculated vibrational spectra are in well agreement with the experimental one. To investigate microscopic second-order non-linear optical NLO behavior of the examined complex, the electric dipole μ, the polarizability α and the hyperpolarizability β were computed using DFT//B3LYP/6-31G (d) method. The time-dependent density functional theory (TD-DFT) was employed to descript the molecular electron structure of the title compound using the B3LYP/6-31G (d) method. According to our calculations, L-histidine chloride monohydrate exhibits non-zero β value revealing microscopic second-order NLO behavior.

  17. On the Prediction of the Nonlinear Absorption in Reverse Saturable Absorbing Materials

    Science.gov (United States)

    Pachter, Ruth; Nguyen, Kiet A.; Day, Paul N.; Kennel, Joshua C.

    2001-03-01

    In our continuing efforts to design materials that exhibit reverse saturable absorption (RSA), we systematically examine the ability of the time-dependent density functional theory (TDDFT) method using local, nonlocal, and hybrid functionals, to predict the experimental nonlinear absorption for a variety of organic and organometallic molecular systems, including a number of free-base porphyrins, phthalocyanine and their metal complexes. The ground and triplet-triplet excitation energies, as well as the oscillator strengths are calculated, indicating good agreement with experiment. We conclude that the TDDFT approach with a hybrid functional provides good estimates for the nonlinear absorption of RSA materials.

  18. Reliability analysis of multi-degree-of-freedom nonlinear random structure vibration systems with correlation failure modes

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Yimin; (张义民); WANG; Shun; (王; 顺); LIU; Qiaoling; (刘巧伶); WEN; Bangchun; (闻邦椿)

    2003-01-01

    Based on the generalized probabilistic finite element method, this paper presents an approximate solution technique for general multi-degree-of-freedom nonlinear random vibration systems with random parameters. The fourth-moment technique, maximum entropy theory and incomplete probability information theory are employed to systematically develop a reliability analysis method for dynamic random structural systems with correlation failure modes under unavailable joint probability density functions of basic random variables. The first passage problem of multi-degree-of-freedom nonlinear random vibration systems is solved.

  19. Non-Linear Numerical Modeling and Experimental Testing of a Point Absorber Wave Energy Converter

    DEFF Research Database (Denmark)

    Zurkinden, Andrew Stephen; Ferri, Francesco; Beatty, S.;

    2014-01-01

    the calculation of the non-linear hydrostatic restoring moment by a cubic polynomial function fit to laboratory test results. Moreover, moments due to viscous drag are evaluated on the oscillating hemisphere considering the horizontal and vertical drag force components. The influence on the motions of this non...

  20. Local Environment and Interactions of Liquid and Solid Interfaces Revealed by Spectral Line Shape of Surface Selective Nonlinear Vibrational Probe

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Shun-Li; Fu, Li; Chase, Zizwe A.; Gan, Wei; Wang, Hong-Fei

    2016-11-10

    Vibrational spectral lineshape contains important detailed information of molecular vibration and reports its specific interactions and couplings to its local environment. In this work, recently developed sub-1 cm-1 high-resolution broadband sum frequency generation vibrational spectroscopy (HR-BB-SFG-VS) was used to measure the -C≡N stretch vibration in the 4-n-octyl-4’-cyanobiphenyl (8CB) Langmuir or Langmuir-Blodgett (LB) monolayer as a unique vibrational probe, and the spectral lineshape analysis revealed the local environment and interactions at the air/water, air/glass, air/calcium fluoride and air/-quartz interfaces for the first time. The 8CB Langmuir or LB film is uniform and the vibrational spectral lineshape of its -C≡N group has been well characterized, making it a good choice as the surface vibrational probe. Lineshape analysis of the 8CB -C≡N stretch SFG vibrational spectra suggests the coherent vibrational dynamics and the structural and dynamic inhomogeneity of the -C≡N group at each interface are uniquely different. In addition, it is also found that there are significantly different roles for water molecules in the LB films on different substrate surfaces. These results demonstrated the novel capabilities of the surface nonlinear spectroscopy in characterization and in understanding the specific structures and chemical interactions at the liquid and solid interfaces in general.

  1. Imperfection Sensitivity of Nonlinear Vibration of Curved Single-Walled Carbon Nanotubes Based on Nonlocal Timoshenko Beam Theory

    Directory of Open Access Journals (Sweden)

    Iman Eshraghi

    2016-09-01

    Full Text Available Imperfection sensitivity of large amplitude vibration of curved single-walled carbon nanotubes (SWCNTs is considered in this study. The SWCNT is modeled as a Timoshenko nano-beam and its curved shape is included as an initial geometric imperfection term in the displacement field. Geometric nonlinearities of von Kármán type and nonlocal elasticity theory of Eringen are employed to derive governing equations of motion. Spatial discretization of governing equations and associated boundary conditions is performed using differential quadrature (DQ method and the corresponding nonlinear eigenvalue problem is iteratively solved. Effects of amplitude and location of the geometric imperfection, and the nonlocal small-scale parameter on the nonlinear frequency for various boundary conditions are investigated. The results show that the geometric imperfection and non-locality play a significant role in the nonlinear vibration characteristics of curved SWCNTs.

  2. Application of dynamic absorber in vibration controlling of Stirling cryocooler%动力吸振器在斯特林制冷机振动控制中的应用

    Institute of Scientific and Technical Information of China (English)

    孙述泽; 闫春杰

    2011-01-01

    Vibration characteristics were analyzed based on the theoretical model of Stirling cryocooler. Dynamic absorber met the requirements of vibration controlling of Stirling cryocooler, application of dynamic absorber in vibration controlling of Stirling cryocooler was shown. Designing method of dynamic absorber was present in theory in paper.%针对斯特林制冷机的振动模型分析了振动特点,分析了动力吸振器在斯特林制冷机振动控制中的应用,给出了动力吸振器的设计方法.

  3. Nonlinear vibration and radiation from a panel with transition to chaos induced by acoustic waves

    Science.gov (United States)

    Maestrello, Lucio; Frendi, Abdelkader; Brown, Donald E.

    1992-01-01

    The dynamic response of an aircraft panel forced at resonance and off-resonance by plane acoustic waves at normal incidence is investigated experimentally and numerically. Linear, nonlinear (period doubling) and chaotic responses are obtained by increasing the sound pressure level of the excitation. The response time history is sensitive to the input level and to the frequency of excitation. The change in response behavior is due to a change in input conditions, triggered either naturally or by modulation of the bandwidth of the incident waves. Off-resonance, bifurcation is diffused and difficult to maintain, thus the panel response drifts into a linear behavior. The acoustic pressure emanated by the panel is either linear or nonlinear as is the vibration response. The nonlinear effects accumulate during the propagation with distance. Results are also obtained on the control of the panel response using damping tape on aluminum panel and using a graphite epoxy panel having the same size and weight. Good agreement is obtained between the experimental and numerical results.

  4. Parametric study on nonlinear vibration of composite truss core sandwich plate with internal resonance

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Jia Nen; Liu, Jun [Tianjin Key Laboratory of the Design and Intelligent Control of the Advanced Mechatronical System, Tianjin University of Technology, Tianjin (China); Zhang, Wei; Yao, Ming Hui [College of Mechanical Engineering, Beijing University of Technology, Beijing (China); Sun, Min [School of Science, Tianjin Chengjian University, Tianjin (China)

    2016-09-15

    Nonlinear vibrations of carbon fiber reinforced composite sandwich plate with pyramidal truss core are investigated. The governing equation of motion for the sandwich plate is derived by using a Zig-Zag theory under consideration of geometrically nonlinear. The natural frequencies of sandwich plates with different dimensions are calculated and compared with those obtained from the classic laminated plate theory and Reddy's third-order shear deformation plate theory. The frequency responses and waveforms of the sandwich plate when 1:3 internal resonance occurs are obtained, and the characteristics of the internal resonance are discussed. The influences of layer number of face sheet, strut radius, core height and inclination angle on the nonlinear responses of the sandwich plate are analyzed. The results demonstrate that the strut radius and inclination angle mainly affect the resonance frequency band of the sandwich plate, and the layer number and core height not only influence the resonance frequency band but also significantly affect the response amplitude.

  5. New modified multi-level residue harmonic balance method for solving nonlinearly vibrating double-beam problem

    Science.gov (United States)

    Rahman, Md. Saifur; Lee, Yiu-Yin

    2017-10-01

    In this study, a new modified multi-level residue harmonic balance method is presented and adopted to investigate the forced nonlinear vibrations of axially loaded double beams. Although numerous nonlinear beam or linear double-beam problems have been tackled and solved, there have been few studies of this nonlinear double-beam problem. The geometric nonlinear formulations for a double-beam model are developed. The main advantage of the proposed method is that a set of decoupled nonlinear algebraic equations is generated at each solution level. This heavily reduces the computational effort compared with solving the coupled nonlinear algebraic equations generated in the classical harmonic balance method. The proposed method can generate the higher-level nonlinear solutions that are neglected by the previous modified harmonic balance method. The results from the proposed method agree reasonably well with those from the classical harmonic balance method. The effects of damping, axial force, and excitation magnitude on the nonlinear vibrational behaviour are examined.

  6. Wagging tail vibration absorber

    Science.gov (United States)

    Barclay, R. G.; Humphrey, P. W.

    1969-01-01

    A 750-foot cantilever length of extendible-tape boom (very low stiffness) was considered as the main system to be damped. A number of tail lengths were tried from 20 feet to 80 feet after which 40 feet was investigated further as a desirable compromise between performance and practical lengths. A 40-foot damping tail produced a damping effect on the main boom for the first mode equivalent in decay rate to 3.1 percent of critical damping. In this case the spring-hinge and tail were tuned to the main boom first mode frequency and the hinge damping was set at 30 percent of critical based on the tail properties. With this same setting, damping of the second mode was .4 percent and the third mode .1 percent.

  7. Nonlinear analysis and vibration suppression control for a rigid-flexible coupling satellite antenna system composed of laminated shell reflector

    Science.gov (United States)

    You, Bin Di; Wen, Jian Min; Zhao, Yang

    2014-03-01

    In this paper, a nonlinear dynamic modeling method for a rigid-flexible coupling satellite antenna system composed of laminated shell reflector is proposed undergoing a large overall motion. For the study of the characteristics of the reflector using laminated shell structure, the displacement field description of a point in a 3-noded shell element is acquired in conjunction with the length stretch, lateral bending and torsional deformation. Hence, a nonlinear dynamic model of the satellite antenna system is deduced based on Lagrange's equations. The complete expressions of nonlinear terms of elastic deformation and coupling terms between rigid motion and large deflection are considered in the dynamic equations, and the dynamic behavior of the rigid-flexible coupling system is analyzed using linear model and nonlinear model, respectively. In order to eliminate the system vibration, the PD with vibration force feedback control strategy is used to achieve its desired angles and velocity in a much shorter duration, and can further accomplish reduction of residual vibration. Then, the asymptotic stability of the system is proved based on the Lyapunov method. Through numerical computation, the results show that the linear model cannot capture the motion-induced coupling terms and geometric nonlinearity variations. However, the nonlinear model is suitable for dealing with large deformation rigid-flexible problem undergoing large overall motions. Hence, the satellite antenna pointing accuracy would be predicted based on the nonlinear model. Furthermore, the results also show that the proposed control strategy can suppress system vibration quickly. The above conclusions would have important academic significance and engineering value.

  8. Nonlinear Vibration Analysis of Helical Face-Gear Transmission System with Multi-Factor

    Directory of Open Access Journals (Sweden)

    Liu Bo

    2016-01-01

    Full Text Available A systematic analysis of the dynamics of a helical face-gear system with 8 degree of freedom is performed in this study under complex excitation. The nonlinear dynamic system is solved by the Runge-Kutta method. The bifurcation and dynamic load characteristics of the system is identified from a series of diagrams. The effect of multi-factor on bifurcation diagrams is also analysed. The results real that with the increase of dimensionless frequency, the system undergoes the process of periodic, chaotic and periodic motions. The amplitude of the dynamic load gradually increases in a certain range and begins to decrease at a certain value. A higher mesh damping coefficient or a higher input torque or a lower gear backlash can reduce the vibration or eliminate chaotic responses.

  9. Non-linear Vibrations of Deep Cylindrical Shells by the p-Version Finite Element Method

    Directory of Open Access Journals (Sweden)

    Pedro Ribeiro

    2010-01-01

    Full Text Available A p-version shell finite element based on the so-called shallow shell theory is for the first time employed to study vibrations of deep cylindrical shells. The finite element formulation for deep shells is presented and the linear natural frequencies of different shells, with various boundary conditions, are computed. These linear natural frequencies are compared with published results and with results obtained using a commercial software finite element package; good agreement is found. External forces are applied and the displacements in the geometrically non-linear regime computed with the p-model are found to be close to the ones computed using a commercial FE package. In all numerical tests the p-FE model requires far fewer degrees of freedom than the regular FE models. A numerical study on the dynamic behaviour of deep shells is finally carried out.

  10. Parametric Nonlinear Finite Element Analysis of Strain Ratcheting in Pressurized Elbows Based on Random Vibration

    Directory of Open Access Journals (Sweden)

    Yong Zhao

    1996-01-01

    Full Text Available The large strain ratcheting in cyclic plasticity of a typical pressurized pipe elbow in a realistic nuclear piping system was investigated in a more quantitative manner than previously. The elbow was modeled using a fine mesh of shell elements that can provide the completed information of detailed time varying strain distributions in the whole elbow area. The nonlinear time history stress analyses performed were based on a pseudostatic concept using the vector-valued stochastic displacement response time series loaded at the elbow ends. The response time series were synthesized using a simulation approach based on the random vibration analyses of the piping system and its supporting building. After a finite element mesh convergence study, parametric analyses were conducted that included the effects due to the magnitude changes in excitation level, internal pressure, material yield stress, and material strain hardening.

  11. On the weakly nonlinear, transversal vibrations of a conveyor belt with a low and time-varying velocity

    NARCIS (Netherlands)

    Suweken, G.; van Horssen, W.T.

    2002-01-01

    In this paper the weakly nonlinear, transversal vibrations of a conveyor belt will be considered. The belt is assumed to move with a low and time-varying speed. Using Kirchhoff's approach a single equation of motion will be derived from a coupled system of partial differential equations describing

  12. Vibration Control of Structures using Vibro-Impact Nonlinear Energy Sinks

    Directory of Open Access Journals (Sweden)

    M. Ahmadi

    2016-09-01

    Full Text Available Using Vibro-Impact Nonlinear Energy Sinks (VI NESs is one of the novel strategies to control structural vibrations and mitigate their seismic response. In this system, a mass is tuned on the structure floor, so that it has a specific distance from an inelastic constraint connected to the floor mass. In case of structure stimulation, the displaced VI NES mass collides with the  inelastic constraint and upon impacts, energy is dissipated. In the present work, VI NES is studied when its parameters, including clearance and stiffness ratio, are simultaneously optimized. Harmony search as a recent meta-heuristic algorithm is efficiently specialized and utilized for the aforementioned continuous optimization problem. The optimized attached VI NES is thus shown to be capable of interacting with the primary structure over a wide range of frequencies. The resulting controlled response is then investigated, in a variety of low and medium rise steel moment frames, via nonlinear dynamic time history analyses. Capability of the VI NES to dissipate siesmic input energy of earthquakes and their capabilitiy in reducing response of srtructures effectively, through vibro-impacts between the energy sink’s mass and the floor mass, is discussed by extracting several performance indices and the corresponding Fourier spectra. Results of the numerical simulations done on some structural model examples reveal that the optimized VI NES has caused successive redistribution of energy from low-frequency high-amplitude vibration modes to high-frequency low-amplitude modes, bringing about the desired attenuation of the structural responses.

  13. Wideband vibrational electromagnetic energy harvesters with nonlinear polyimide springs based on rigid-flex printed circuit boards technology

    Science.gov (United States)

    Chiu, Yi; Hong, Hao-Chiao; Hsu, Wei-Hung

    2016-12-01

    A wideband vibrational electromagnetic energy harvester employing nonlinear spring effects is proposed and demonstrated. The harvesters were designed and fabricated by commercial rigid-flex printed circuit boards technology. Rigid FR-4 boards were used for mechanical support and coil winding, whereas flexible polyimide films were patterned for mechanical springs and mass platforms. Two sets of coils were patterned and fabricated in the harvester with an internal coil resistance of about 16 Ω each. Two rare-earth magnets were attached to the central platform as shuttle mass. The total dimension of the harvester was 20 × 20 × 4 mm3. In vibration tests, nonlinearity could be observed even at 0.1 grms vibration level due to the spring hardening effect. The frequency for peak induced voltage increased from 187 Hz at low vibration to 382 Hz at 5 grms vibration. The effective half-power bandwidth increased from 8 Hz at 0.1 grms to 32 Hz at 1 grms and 52 Hz at 5 grms due to the hysteresis in frequency response. For a matched load and 1 grms vibration at 250 Hz, the maximum output power was 160 nW, corresponding to a power density of 100 nW cm-3.

  14. Nonlinear Vibration Analysis for a Jeffcott Rotor with Seal and Air-Film Bearing Excitations

    Directory of Open Access Journals (Sweden)

    Yuefang Wang

    2010-01-01

    Full Text Available The nonlinear coupling vibration and bifurcation of a high-speed centrifugal compressor with a labyrinth seal and two air-film journal bearings are presented in this paper. The rotary shaft and disk are modeled as a rigid Jeffcott rotor. Muszynska's model is used to express the seal force with multiple parameters. For air-film journal bearings, the model proposed by Zhang et al. is adopted to express unsteady bearing forces. The Runge-Kutta method is used to numerically determine the vibration responses of the disk center and the bearings. Bifurcation diagrams for transverse motion of the rotor are presented with parameters of rotation speed and pressure drop of the seal. Multiple subharmonic, periodic, and quasiperiodic motions are presented with two seal-pressure drops. The bifurcation characteristics show inherent interactions between forces of the air-film bearings and the seal, presenting more complicated rotor dynamics than the one with either of the forces alone. Bifurcation diagrams are obtained with parameters of pressure drop and seal length determined for the sake of operation safety.

  15. Vibrational spectroscopic, structural and nonlinear optical activity studies on 6-aminonicotinamide: A DFT approach

    Science.gov (United States)

    Asath, R. Mohamed; Premkumar, S.; Rekha, T. N.; Jawahar, A.; Mathavan, T.; Benial, A. Milton Franklin

    2016-05-01

    The conformational analysis was carried out for 6-aminonicotinamide (ANA) using potential energy surface scan method and the most stable optimized conformer was predicted. The theoretical vibrational frequencies were calculated for the optimized geometry using DFT/B3LYP cc-pVQZ basis set by Gaussian 09 Program. The vibrational frequencies were assigned on the basis of potential energy distribution calculation using VEDA 4.0 program. The Mulliken atomic charge values were calculated. In the Frontier molecular orbitals analysis, the molecular reactivity, kinetic stability, intermolecular charge transfer studies and the related molecular properties were calculated. The ultraviolet-visible spectrum was simulated for both in the gas phase and liquid phase (ethanol) and the л to л* electronic transition was predicted. The nonlinear optical (NLO) activity was studied by means of the first order hyperpolarizability value, which was 8.61 times greater than the urea and the natural bond orbital analysis was also performed to confirm the NLO activity of the molecule. Hence, the ANA molecule is a promising candidate for the NLO materials.

  16. Effect of Rail Vibration Absorbers on Vertical Vibration of Elevated Structures%钢轨吸振器对高架结构垂向振动的影响

    Institute of Scientific and Technical Information of China (English)

    杨建近; 杨新文

    2014-01-01

    建立带有钢轨吸振器的高速铁路高架结构板式轨道与桥梁垂向耦合振动模型,分析钢轨吸振器对轨道和桥梁结构垂向振动的影响。模型已考虑了钢轨吸振器、板式轨道结构及桥梁间的耦合作用。钢轨吸振器被视为两自由度的质量-弹簧系统,钢轨、轨道板和桥梁被视为多层叠合梁模型,彼此用弹簧阻尼元件联接。利用动柔度函数,得到吸振器-板式轨道-桥梁系统垂向振动响应的解析表达式,并以轮轨表面粗糙度谱作为激励求解模型的振动响应。研究结果表明:钢轨吸振器在180 Hz~300 Hz及700 Hz~1000 Hz频段内对整个高架轨道系统的位移幅值及相位、振动衰减产生较明显的影响;同时,在轮轨表面粗糙度谱的激励下,带有钢轨吸振器的轮轨系统的轮轨力在pinned-pinned频率处明显减小,在前两阶自振主频附近钢轨吸振器对整个高架轨道系统结构振动的影响较明显。%The frequency-domain analysis model with a rail vibration absorber is established for analyzing the elevated slab-track and track-bridge coupled vertical vibration. The effect of the rail vibration absorber on the vertical vibrations of elevated railway and bridge is analyzed. The coupling effect of the absorber, rail, slab track and elevated bridge is considered. The absorber is modeled to be a mass-spring system with two degrees of freedom. The rail, slab track and elevated bridge are respectively considered as an infinitely long Timoshenko beam, an end-free Euler beam and a simply supported Euler beam, and they are connected one another with spring and damping elements. The vertical vibrations of the system are solved by dynamic flexibility functions. The effect of the absorber on the vertical vibration of the elevated railway is analyzed, and the vibrations of the elevated railway structures excited by the wheel-rail roughness spectra are obtained. The results show that

  17. Nonlinear Free Vibration Analysis of Thin-walled Curved Beam with Non-symmetric Open Cross Section

    Institute of Scientific and Technical Information of China (English)

    DUAN Hai-juan; SONG Zhen-sen

    2008-01-01

    A finite element formulation was presented for the nonlinear free vibration of thin-walled curved beams with non-symmetric open across section. The kinetic and potential energies were derived by the virtual principle. The energy function includes the effect of flexural-torsional coupling, the torsion warping and the shear centre location. For finite element analysis, cubic polynomials were utilized as the shape functions of the two nodal thin-walled curved elements. Each node possesses seven degrees freedom including the warping degree of freedom. The nonlinear eigenvalue problem was solved by the direct iteration technique. The results are compared with those for straight beams as available in the literature. The results for nonlinear free vibration analysis of curved beams for various radii and subtended angle are presented.

  18. Studies on Crystal Growth, Vibrational, Electronic Properties of Nonlinear Optical Crystal: Triglycine Phosphate

    Science.gov (United States)

    Meera, M. R.; Dipuna Das, C. N.; Bena Jothy, V.; Rayar, S. L.

    2016-10-01

    Nonlinear optics is a topic of much current interest that exhibits a great diversity. This is due to the technological potentials of certain nonlinear optical effects for photonic based technologies. Many NLO crystals grown by mixing amino acids with various organic and inorganic acids have been reported in the literature. Hence, glycine mixed semi-organic material will be of special interest as a fundamental building block to develop many complex crystals with improved NLO properties. In this context, the present work it is attempted to grow NLO active Triglycine phosphate [(NH2CH2COOH)3H3PO4](TGP) crystal from aqueous solution at room temperature by slow evaporation method. The geometry, intermolecular hydrogen bonding and harmonic vibrational wavenumbers of TGP was investigated with the help of B3LYP density functional theory (DFT) methods. Natural Bond Orbital (NBO) analysis confirms the occurrence of strong intermolecular N-H...O hydrogen bond. Second harmonic frequency generation was examined by Kurtz and Perry powder test. Theoretical first order hyperpolarizability value was calculated.

  19. Nonlinear free vibrations of centrifugally stiffened uniform beams at high angular velocity

    Science.gov (United States)

    Bekhoucha, F.; Rechak, S.; Duigou, L.; Cadou, J. M.

    2016-09-01

    In this paper, we study the bending nonlinear free vibrations of a centrifugally stiffened beam with uniform cross-section and constant angular velocity. The nonlinear intrinsic equations of motion used here are geometrically exact and specific to beams exhibiting large amplitude displacements and rotations associated with small strains. Based on the Timoshenko beam model, these equations are derived from Hamilton's principle, in which the warping is considered. All coupling terms are considered including Coriolis terms. The studied beams are isotropic with clamped-free boundary conditions. By combining the Galerkin method with the harmonic balance method, the equations of motion are converted into a quadratic function treated with a continuation method: the Asymptotic Numerical Method, where the generalized displacement vector is presented as a series expansion. While analysing the effect of the angular velocity, we determine the amplitude versus frequency variations which are plotted as backbone curves. Considering the first lagging and flapping modes, the changes in beam behaviour from hardening to softening are investigated and identified as a function of the angular velocity and the effect of shear. Particular attention is paid to high angular velocities for both Euler-Bernoulli and Timoshenko beams and the natural frequencies so obtained are compared with the results available in the literature.

  20. 轻量化惯导系统振动响应分析与减振器优化%Vibration response analysis of lightweight I NS and optimization of vibration absorber

    Institute of Scientific and Technical Information of China (English)

    王平; 张广鹏; 尉飞; 张延顺; 解芳芳

    2016-01-01

    The structure flexibility caused by lightweight design of inertial navigation system (INS ) will generate a non-negligible influence on the vibration response of INS.Aiming at a certain lightweight inertial navigation structure,the dynamic model of the INS is established through adopting the substructure synthesis method based on frequency response functions.Subsequently,the influence of IMU flexibility on the INS is analyzed using this model.In addition,a parameter optimization design method of the vibration absorbing system is proposed.Through the optimization of the vibration absorber,the angular displacement of the INS decreases obviously,and the vibration coupling is suppressed effectively. Finally, the accuracy of the proposed optimization method is verified by vibration experiment,and it is also found that the heading and attitude measurement precision of the INS in the vibration process is improved after the optimization of the vibration absorber parameters.%惯导系统轻量化设计产生的结构柔性对其振动响应会产生不可忽略的影响。针对某型轻量化惯导结构,采用基于频响函数的子结构综合方法,建立了惯导系统的动力学模型,并应用此模型分析了IMU柔性对惯导系统的影响,并提出了一种减振系统参数优化设计方法。通过减振器优化,惯导系统的角位移明显减小,有效抑制了振动耦合。最后通过振动实验验证了优化方法的准确性,同时发现惯导系统经减振器参数优化后提高了振动过程中惯导系统航向和姿态测量精度。

  1. Probing highly-obscured galaxy nuclei with vibrationally excited HCN - Extreme luminosity densities inside self-absorbed v=0 HCN and HCO+

    CERN Document Server

    Aalto, S; Gonzalez-Alfonso, E; Muller, S; Sakamoto, K; Fuller, G A; Garcia-Burillo, S; van der Werf, P; Neri, R; Spaans, M; Combes, F; Viti, S; Muehle, S; Armus, L; Evans, A; Sturm, E; Cernicharo, J; Henkel, C; Greve, T R

    2015-01-01

    We present high resolution (0."4) IRAM PdBI and ALMA mm and submm observations of the (Ultra) Luminous Infrared Galaxies ((U)LIRGs) IRAS17208-0014, Arp220, IC860 and Zw049.057 that reveal intense line emission from vibrationally excited (v2=1) J=3-2 and 4-3 HCN. The emission is emerging from buried, compact (r5e13 Lsun/kpc2. These nuclei are likely powered by accreting supermassive black holes (SMBHs) and/or hot (>200 K) extreme starbursts. Vibrational, v2=1, lines of HCN are excited by intense 14 micron mid-infrared emission and are excellent probes of the dynamics, masses and physical conditions of (U)LIRG nuclei when H2 column densities exceed 1e24 cm-2. It is clear that these lines open up a new interesting avenue to gain access to the most obscured AGNs and starbursts. Vibrationally excited HCN acts as a proxy for the absorbed mid-infrared emission from the embedded nuclei, which allows for reconstruction of the intrinsic, hotter dust SED. In contrast, the ground vibrational state (v=0), J=3-2 and 4-3 ro...

  2. A Vibration Control Method for the Flexible Arm Based on Energy Migration

    Directory of Open Access Journals (Sweden)

    Yushu Bian

    2015-01-01

    Full Text Available A vibration control method based on energy migration is proposed to decrease vibration response of the flexible arm undergoing rigid motion. A type of vibration absorber is suggested and gives rise to the inertial coupling between the modes of the flexible arm and the absorber. By analyzing 1 : 2 internal resonance, it is proved that the internal resonance can be successfully created and the exchange of vibration energy is existent. Due to the inertial coupling, the damping enhancement effect is revealed. Via the inertial coupling, vibration energy of the flexible arm can be dissipated by not only the damping of the vibration absorber but also its own enhanced damping, thereby effectively decreasing vibration. Through numerical simulations and analyses, it is proven that this method is feasible in controlling nonlinear vibration of the flexible arm undergoing rigid motion.

  3. Effect Of Long-Period Earthquake Ground Motions On Nonlinear Vibration Of Shells With Variable Thickness

    Science.gov (United States)

    Abdikarimov, R.; Bykovtsev, A.; Khodzhaev, D.; Research Team Of Geotechnical; Structural Engineers

    2010-12-01

    Long-period earthquake ground motions (LPEGM) with multiple oscillations have become a crucial consideration in seismic hazard assessment because of the rapid increase of tall buildings and special structures (SP).Usually, SP refers to innovative long-span structural systems. More specifically, they include many types of structures, such as: geodesic showground; folded plates; and thin shells. As continuation of previous research (Bykovtsev, Abdikarimov, Khodzhaev 2003, 2010) analysis of nonlinear vibrations (NV) and dynamic stability of SP simulated as shells with variable rigidity in geometrically nonlinear statement will be presented for two cases. The first case will represent NV example of a viscoelastic orthotropic cylindrical shell with radius R, length L and variable thickness h=h(x,y). The second case will be NV example of a viscoelastic shell with double curvature, variable thickness, and bearing the concentrated masses. In both cases we count, that the SP will be operates under seismic load generated by LPEGM with multiple oscillations. For different seismic loads simulations, Bykovtsev’s Model and methodology was used for generating LPEGM time history. The methodology for synthesizing LPEGM from fault with multiple segmentations was developed by Bykovtev (1978-2010) and based on 3D-analytical solutions by Bykovtsev-Kramarovskii (1987&1989) constructed for faults with multiple segmentations. This model is based on a kinematics description of displacement function on the fault and included in consideration of all possible combinations of 3 components of vector displacement (two slip vectors and one tension component). The opportunities to take into consideration fault segmentations with both shear and tension vector components of displacement on the fault plane provide more accurate LPEGM evaluations. Radiation patterns and directivity effects were included in the model and more physically realistic results for simulated LPEGM were considered. The

  4. Linear, third- and fifth-order nonlinear spectroscopy of a charge transfer system coupled to an underdamped vibration

    CERN Document Server

    Dijkstra, Arend G

    2015-01-01

    We study hole, electron and exciton transport in a charge transfer system in the presence of underdamped vibrational motion. We analyze the signature of these processes in the linear and third-, and fifth-order nonlinear electronic spectra. Calculations are performed with a numerically exact hierarchical equations of motion method for an underdamped Brownian oscillator spectral density. We find that combining electron, hole and exciton transfer can lead to non-trivial spectra with more structure than with excitonic coupling alone. Traces taken during the waiting time of a two-dimensional spectrum are dominated by vibrational motion and do not reflect the electron, hole, and exciton dynamics directly. We find that the fifth-order nonlinear response is particularly sensitive to the charge transfer process. While third-order 2D spectroscopy detects the correlation between two coherences, fifth-order 2D spectroscopy (2D population spectroscopy) is here designed to detect correlations between the excited states du...

  5. Nonlinear network model analysis of vibrational energy transfer and localisation in the Fenna-Matthews-Olson complex

    CERN Document Server

    Morgan, Sarah E; Chin, Alex W

    2016-01-01

    Collective protein modes are expected to be important for facilitating energy transfer in the Fenna-Matthews-Olson (FMO) complex, however to date little work has focussed on the microscopic details of these vibrations. The nonlinear network model (NNM) provides a computationally inexpensive approach to studying vibrational modes at the microscopic level, whilst incorporating anharmonicity in the inter-residue interactions which can influence protein dynamics. We apply the NNM to the FMO complex and find evidence for the existence of nonlinear discrete breather modes. These modes tend to transfer energy to the highly connected core pigments, potentially opening up alternative excitation energy transfer routes. Incorporating localised modes based on these discrete breathers in the optical spectra calculations for FMO using ab initio site energies and excitonic couplings can substantially improve their agreement with experimental results.

  6. Nonlinear network model analysis of vibrational energy transfer and localisation in the Fenna-Matthews-Olson complex

    Science.gov (United States)

    Morgan, Sarah E.; Cole, Daniel J.; Chin, Alex W.

    2016-11-01

    Collective protein modes are expected to be important for facilitating energy transfer in the Fenna-Matthews-Olson (FMO) complex of photosynthetic green sulphur bacteria, however to date little work has focussed on the microscopic details of these vibrations. The nonlinear network model (NNM) provides a computationally inexpensive approach to studying vibrational modes at the microscopic level in large protein structures, whilst incorporating anharmonicity in the inter-residue interactions which can influence protein dynamics. We apply the NNM to the entire trimeric FMO complex and find evidence for the existence of nonlinear discrete breather modes. These modes tend to transfer energy to the highly connected core pigments, potentially opening up alternative excitation energy transfer routes through their influence on pigment properties. Incorporating localised modes based on these discrete breathers in the optical spectra calculations for FMO using ab initio site energies and excitonic couplings can substantially improve their agreement with experimental results.

  7. Nonlinear Vibration Study on the Gear System based on the Non-dimensional Differential Equation of Dynamic Model

    Directory of Open Access Journals (Sweden)

    Fan-Ping Qing

    2014-02-01

    Full Text Available The study derives the kinetics equation of the system and analyzes vibration performance considering the nonlinear factors like time-varying mesh stiffness, gear back lash, mesh error. With the time-varying mesh stiffness of the gear increasing, the vibration of the gear system is more intense. The gear backlash has little effect on the aperiodic behaviour. However, with the clearance increasing, the system response quickly converts to chaos response from single frequency response with the increase of gap and the mesh impact is more serious. The excitation frequency is close to the resonance frequency of system, the system appears chaotic response and the vibration amplitude increases. When the frequency is far from the natural frequency, the response of the system tends to be steady. So it is easy to predict the dynamic performance in the design and make the system avoid the resonance frequency. In the following profile modification of gear, it also provides the data sources.

  8. Recurrence plot analysis of nonlinear vibrational dynamics in H sub 3 sup + molecule

    CERN Document Server

    Babinec, P

    2003-01-01

    An ab initio classical trajectories obtained from the simulation of vibrational mode dynamics of H sub 3 sup + molecule were analyzed by Fourier transform and recurrence plot analysis. As has been found, at a particular value of energy supplied to vibrational modes (slightly above the zero point energy) the character of vibrational motion changes from regular to chaotic.

  9. Active linear mass absorber technology for the reduction of noise and vibration at a cylinder deactivation vehicle

    Energy Technology Data Exchange (ETDEWEB)

    Rottner, T.; Eckel, H.G. [Vibracoustic GmbH und Co. KG (Germany); Kim, J.H. [Hyundai Motor Company (Korea); Klatt, C. [Freudenberg New Technologies, Weinheim (Germany)

    2007-07-01

    Cylinder deactivation is a suitable strategy for reducing the fuel consumption of a vehicle. In this particular case, a V6 engine runs under partial load conditions in a restricted engine speed range as an inline three cylinder engine by deactivating an entire bank. As a side effect, noise and vibrations in the deactivated condition deteriorate significantly. For comfort reasons, however, a similar noise and vibration level for both - full and deactivated engine running condition - is desired. To achieve this, active technology is used. In the cylinder deactivation mode, two active linear mass aborbers installed at the engine mounts cancel out the main disturbing engine excitation orders of the engine mount forces. As a result, the noise and vibration in the passenger compartment is significantly reduced. (orig.)

  10. 某超高速转子系统减振结构研究%Research on vibration absorber for a super-high speed rotor system

    Institute of Scientific and Technical Information of China (English)

    陈巍; 杜发荣; 丁水汀; 韩树军; 李云清

    2011-01-01

    为解决某超高速转子系统的失稳碰摩问题,以干摩擦阻尼耗散转子涡动能量理论为依据,采用一种自由安装式干摩擦片减振结构(干摩擦阻尼器).该结构在转轴上安装波形弹性垫片及干摩擦片,通过螺母预紧力矩向波形弹性垫片及各干摩擦片提供轴向正压力.干摩擦片随转子振动并产生相对运动,从而耗散转子涡动能量,达到减振、增强转子稳定性的目的.通过实验不同数量的干摩擦片和不同预紧力矩的组合寻找满足工程稳定性的减振器结构参数.结果表明:干摩擦阻尼器适用于高速、轻载转子系统的减振、增稳,可以有效降低转子振动,控制转子涡动发散的趋势;所用实验方法有助于快速获得满足工程稳定性的减振结构参数.%A kind of freely assembled dry friction vibration absorber was presented to solve the problems of instability and rubbing faults for a super-high speed rotor system based on theory of dry friction dissipating energy from rotor vibration. In this structure, a waveshaped elastic pad and some dry friction pads were freely assembled on shaft, and axial normai force was provided for elastic pad and dry friction pads by pre-loaded moment for nut.When friction pads moved with shaft, the relative movements between them could dissipate vibration energy from rotor system, absorb vibration and enhance system stability. The configuration format meeting the stability in engineering for the damper of the studied rotor system has been acquired by testing different groups of dry friction pads and pre-loaded moment. The results show that dry friction damper is suitable for high speed and light loaded rotor system to restrain vibration and enhance its stability. The testing routine is helpful to find a comfortable configuration format in engineering of dry friction damper.

  11. ZERO MODE NATURAL FREQUENCY AND NONLINEAR VIBRATION OF COUPLED LATERAL AND TORSION OF A LARGE TURBINE GENERATOR

    Institute of Scientific and Technical Information of China (English)

    Ta Na; Qiu Jiajun; Cai Ganhua

    2005-01-01

    Zero mode natural frequency (ZMNF) is found during experiments. The ZMNF and vibrations resulted by it are studied. First, calculating method of the ZMNF excited by electromagnetic in vibrational system of coupled mechanics and electrics are given from the view of magnetic energy.Laws that the ZMNF varies with active power and exciting current are obtained and are verified by experiments. Then, coupled lateral and torsional vibration of rotor shaft system is studied by considering rest eccentricity, rotating eccentricity and swing eccentricity. Using Largrange-Maxwell equation when three phases are asymmetric derives differential equation of the coupled vibration. With energy method of nonlinear vibration, amplitude-frequency characteristics of resonance are studied when rotating speed of rotor equals to ZMNF. The results show that ZMNF will occur in turbine generators by the action of electromagnetic. Because ZMNF varies with electromagnetic parameters,resonance can occur when exciting frequency of the rotor speed is fixed whereas exciting current change. And also find that a generator is in the state of large amplitude in rated exciting current.

  12. Axial-transversal coupling in the free nonlinear vibrations of Timoshenko beams with arbitrary slenderness and axial boundary conditions

    Science.gov (United States)

    Lenci, Stefano; Rega, Giuseppe

    2016-06-01

    The nonlinear free oscillations of a straight planar Timoshenko beam are investigated analytically by means of the asymptotic development method. Attention is focused for the first time, to the best of our knowledge, on the nonlinear coupling between the axial and the transversal oscillations of the beam, which are decoupled in the linear regime. The existence of coupled and uncoupled motion is discussed. Furthermore, the softening versus hardening nature of the backbone curves is investigated in depth. The results are summarized by means of behaviour charts that illustrate the different possible classes of motion in the parameter space. New, and partially unexpected, phenomena, such as the changing of the nonlinear behaviour from softening to hardening by adding/removing the axial vibrations, are highlighted.

  13. Nonlinear effects of a modal domain optical fiber sensor in a vibration suppression control loop for a flexible structure

    Science.gov (United States)

    Lindner, D. K.; Zvonar, G. A.; Baumann, W. T.; Delos, P. L.

    1993-01-01

    Recently, a modal domain optical fiber sensor has been demonstrated as a sensor in a control system for vibration suppression of a flexible cantilevered beam. This sensor responds to strain through a mechanical attachment to the structure. Because this sensor is of the interferometric type, the output of the sensor has a sinusoidal nonlinearity. For small levels of strain, the sensor can be operated in its linear region. For large levels of strain, the detection electronics can be configured to count fringes. In both of these configurations, the sensor nonlinearity imposes some restrictions on the performance of the control system. In this paper we investigate the effects of these sensor nonlinearities on the control system, and identify the region of linear operation in terms of the optical fiber sensor parameters.

  14. Vibration reduction for smart periodic structures via periodic piezoelectric arrays with nonlinear interleaved-switched electronic networks

    Science.gov (United States)

    Bao, Bin; Guyomar, Daniel; Lallart, Mickaël

    2017-01-01

    Smart periodic structures covered by periodically distributed piezoelectric patches have drawn more and more attention in recent years for wave propagation attenuation and corresponding structural vibration suppression. Since piezoelectric materials are special type of energy conversion materials that link mechanical characteristics with electrical characteristics, shunt circuits coupled with such materials play a key role in the wave propagation and/or vibration control performance in smart periodic structures. Conventional shunt circuit designs utilize resistive shunt (R-shunt) and resonant shunt (RL-shunt). More recently, semi-passive nonlinear approaches have also been developed for efficiently controlling the vibrations of such structures. In this paper, an innovative smart periodic beam structure with nonlinear interleaved-switched electric networks based on synchronized switching damping on inductor (SSDI) is proposed and investigated for vibration reduction and wave propagation attenuation. Different from locally resonant band gap mechanism forming narrow band gaps around the desired resonant frequencies, the proposed interleaved electrical networks can induce new broadly low-frequency stop bands and broaden primitive Bragg stop bands by virtue of unique interleaved electrical configurations and the SSDI technique which has the unique feature of realizing automatic impedance adaptation with a small inductance. Finite element modeling of a Timoshenko electromechanical beam structure is also presented for validating dispersion properties of the structure. Both theoretical and experimental results demonstrate that the proposed beam structure not only shows better vibration and wave propagation attenuation than the smart beam structure with independent switched networks, but also has technical simplicity of requiring only half of the number of switches than the independent switched network needs.

  15. Effect of one-way clutch on the nonlinear vibration of belt-drive systems with a continuous belt model

    Science.gov (United States)

    Ding, Hu; Zu, Jean W.

    2013-11-01

    This study focuses on the nonlinear steady-state response of a belt-drive system with a one-way clutch. A dynamic model is established to describe the rotations of the driving pulley, the driven pulley, and the accessory shaft. Moreover, the model considers the transverse vibration of the translating belt spans for the first time in belt-drive systems coupled with a one-way clutch. The excitation of the belt-drive system is derived from periodic fluctuation of the driving pulley. In automotive systems, this kind of fluctuation is induced by the engine firing harmonic pulsations. The derived coupled discrete-continuous nonlinear equations consist of integro-partial-differential equations and piece-wise ordinary differential equations. Using the Galerkin truncation, a set of nonlinear ordinary differential equations is obtained from the integro-partial-differential equations. Applying the Runge-Kutta time discretization, the time histories of the dynamic response are numerically solved for the driven pulley and the accessory shaft and the translating belt spans. The resonance areas of the coupled belt-drive system are determined using the frequency sweep. The effects of the one-way clutch on the belt-drive system are studied by comparing the frequency-response curves of the translating belt with and without one-way clutch device. Furthermore, the results of 2-term and 4-term Galerkin truncation are compared to determine the numerical convergence. Moreover, parametric studies are conducted to understand the effects of the system parameters on the nonlinear steady-state response. It is concluded that one-way clutch not only decreases the resonance amplitude of the driven pulley and shaft's rotational vibration, but also reduces the resonance region of the belt's transverse vibration.

  16. Efficient algorithms for solving the non-linear vibrational coupled-cluster equations using full and decomposed tensors.

    Science.gov (United States)

    Madsen, Niels K; Godtliebsen, Ian H; Christiansen, Ove

    2017-04-07

    Vibrational coupled-cluster (VCC) theory provides an accurate method for calculating vibrational spectra and properties of small to medium-sized molecules. Obtaining these properties requires the solution of the non-linear VCC equations which can in some cases be hard to converge depending on the molecule, the basis set, and the vibrational state in question. We present and compare a range of different algorithms for solving the VCC equations ranging from a full Newton-Raphson method to approximate quasi-Newton models using an array of different convergence-acceleration schemes. The convergence properties and computational cost of the algorithms are compared for the optimization of VCC states. This includes both simple ground-state problems and difficult excited states with strong non-linearities. Furthermore, the effects of using tensor-decomposed solution vectors and residuals are investigated and discussed. The results show that for standard ground-state calculations, the conjugate residual with optimal trial vectors algorithm has the shortest time-to-solution although the full Newton-Raphson method converges in fewer macro-iterations. Using decomposed tensors does not affect the observed convergence rates in our test calculations as long as the tensors are decomposed to sufficient accuracy.

  17. High-frequency vibration energy harvesting from impulsive excitation utilizing intentional dynamic instability caused by strong nonlinearity

    Science.gov (United States)

    Remick, Kevin; Dane Quinn, D.; Michael McFarland, D.; Bergman, Lawrence; Vakakis, Alexander

    2016-05-01

    The authors investigate a vibration-based energy harvesting system utilizing essential (nonlinearizable) nonlinearities and electromagnetic coupling elements. The system consists of a grounded, weakly damped linear oscillator (primary system) subjected to a single impulsive load. This primary system is coupled to a lightweight, damped oscillating attachment (denoted as nonlinear energy sink, NES) via a neodymium magnet and an inductance coil, and a piano wire, which generates an essential geometric cubic stiffness nonlinearity. Under impulsive input, the transient damped dynamics of this system exhibit transient resonance captures (TRCs) causing intentional large-amplitude and high-frequency instabilities in the response of the NES. These TRCs result in strong energy transfer from the directly excited primary system to the light-weight attachment. The energy is harvested by the electromagnetic elements in the coupling and, in the present case, dissipated in a resistive element in the electrical circuit. The primary goal of this work is to numerically, analytically, and experimentally demonstrate the efficacy of employing this type of intentional high-frequency dynamic instability to achieve enhanced vibration energy harvesting under impulsive excitation.

  18. Nonlinear Dynamics of a Spring-Supported Piston in a Vibrated Liquid-Filled Housing: II. Experiments

    Science.gov (United States)

    O'Hern, T. J.; Torczynski, J. R.; Clausen, J. R.

    2016-11-01

    The nonlinear dynamics of a piston supported by a spring in a vibrated liquid-filled housing is investigated experimentally. The housing containing the piston and the liquid is subjected to vibrations along its axis. A post fixed to the housing penetrates a hole through the piston and produces a flow resistance that depends on piston position. Flexible bellows attached to the housing ends enable the piston, liquid, and bellows to execute a collective motion that forces little liquid through the flow resistance. The low damping of this motion leads to a resonance, at which the flow-resistance nonlinearity produces a net force on the piston that can cause it to compress its spring. Experiments are performed to investigate the nonlinear dynamics of this system, and these results are compared to theoretical and numerical results. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  19. Size-dependent geometrically nonlinear free vibration analysis of fractional viscoelastic nanobeams based on the nonlocal elasticity theory

    Science.gov (United States)

    Ansari, R.; Faraji Oskouie, M.; Gholami, R.

    2016-01-01

    In recent decades, mathematical modeling and engineering applications of fractional-order calculus have been extensively utilized to provide efficient simulation tools in the field of solid mechanics. In this paper, a nonlinear fractional nonlocal Euler-Bernoulli beam model is established using the concept of fractional derivative and nonlocal elasticity theory to investigate the size-dependent geometrically nonlinear free vibration of fractional viscoelastic nanobeams. The non-classical fractional integro-differential Euler-Bernoulli beam model contains the nonlocal parameter, viscoelasticity coefficient and order of the fractional derivative to interpret the size effect, viscoelastic material and fractional behavior in the nanoscale fractional viscoelastic structures, respectively. In the solution procedure, the Galerkin method is employed to reduce the fractional integro-partial differential governing equation to a fractional ordinary differential equation in the time domain. Afterwards, the predictor-corrector method is used to solve the nonlinear fractional time-dependent equation. Finally, the influences of nonlocal parameter, order of fractional derivative and viscoelasticity coefficient on the nonlinear time response of fractional viscoelastic nanobeams are discussed in detail. Moreover, comparisons are made between the time responses of linear and nonlinear models.

  20. 无线随钻测斜仪减振器减振性能分析%Analysis of Wireless MWD Shock Absorber Vibration Damping Performance

    Institute of Scientific and Technical Information of China (English)

    马朝选; 林坤; 侯永伟; 王洁冰

    2016-01-01

    无线随钻测斜仪中减振器减振性能的优劣直接影响着仪器测井性能、稳定性以及寿命。通过建立有限元模型进行模态分析得到减振器的固有频率,通过非线性分析得到减振器的等效弹簧刚度;进一步将等效弹簧刚度导入ADAMS中建立虚拟样机,分析得到减振器对于0~28g、0~200 Hz连续载荷以及0~53g、5 ms的冲击载荷具有很好的减振效果。该研究分析方法为减振器设计提供方法参考。%Wireless MWD shock absorber damping performance will directly affect the well logging instrument performance ,stability and longevity .In this paper ,the finite element model is established ,and the modal analysis is performed to get the natural frequency of the shock absorber . The equivalent spring stiffness of the damper is obtained by nonlinear analysis . Further ,the equivalent spring stiffness is imported into ADAMS to establish a virtual prototype analysis to obtain the shock absorber for 0~28 g ,0~200 Hz continuous load and 0~53 g ,5 ms shock load with good damping effect .This method can provide reference for the design of shock absorber .

  1. 基于磁流变的动力吸振器特性分析%Characteristics of Dynamic Vibration Absorber Based on Magnetorheological Fluids

    Institute of Scientific and Technical Information of China (English)

    周乾; 黄其柏

    2013-01-01

    A intelligent dynamic vibration absorber (DVA) based on magnetorheological fluid (MRF) is presented. MRF has controllable shear modulus when it is exposed to an external magnetic field. It is used as a controllable elastic and damping element here. When the applied current is changed, the magnetic field through MRF will change,then the resonance frequency of the DVA will shift and increase the band of vibration absorption. The structure parameters of DVA are studied, and easy to control the system to select the parameters, intelligent adjust the DVA.%设计了一种基于磁流变液的智能动力吸振器,它利用磁流变液作为吸振器的弹性和阻尼元件,通过改变外加磁场,控制磁流变液的剪切模量来改变吸振器的固有频率,增大吸振器的吸振频带.并对吸振器的结构参数进行了研究,便于控制系统选择参数,智能调节吸振器.

  2. Nonlinear vibration of carbon nanotube embedded in viscous elastic matrix under parametric excitation by nonlocal continuum theory

    Science.gov (United States)

    Wang, Yi-Ze; Wang, Yue-Sheng; Ke, Liao-Liang

    2016-09-01

    In the present work, the nonlinear vibration of a carbon nanotube which is subjected to the external parametric excitation is studied. By the nonlocal continuum theory and nonlinear von Kármán beam theory, the governing equation of the carbon nanotube is derived with the consideration of the large deformation. The principle parametric resonance of the nanotube is discussed and the approximation explicit solution is presented by the multiple scale method. Numerical calculations are performed. It can be observed that when the mode number is 1, the stable region can be significantly changed by the parametric excitation, length-to-diameter ratio and matrix stiffness. This phenomenon becomes different to appear if the mode number increases. Moreover, the small scale effects have great influences on the positive bifurcation point for the short carbon nanotube, and the nonlocal continuum theory can present the proper model.

  3. Nonlinear Vibration of a Multirotor System Connected by a Flexible Coupling Subjected to the Holonomic Constraint of Dynamic Angular Misalignment

    Directory of Open Access Journals (Sweden)

    M. Li

    2012-01-01

    Full Text Available This paper proposes a mathematical model of the multirotor system with a flexible coupling on spring supports on Lagrange's approach, which has taken into account the effects of dynamic angular misalignment and mass unbalance. Then its nonlinear dynamic behaviors of the system are discussed based on the method of multiple scales and numerical technique, respectively. The results show that the responses of the system in lateral directions contain a similar component to that of the mass unbalanced system on both the vibrating frequency and amplitude and involve the typical nonlinear components such as the ones from some combined frequencies; the results also reveal that the numerical agreements on the above-mentioned methods are perfect for the transient responses.

  4. Vibration reduction on a nonlinear flexible structure through resonant control and disturbance estimator

    Science.gov (United States)

    Cazzulani, Gabriele; Resta, Ferruccio; Ripamonti, Francesco

    2012-04-01

    Large mechanical structures are often affected by high level vibrations due to their flexibility. These vibrations can reduce the system performances and lifetime and the use of active vibration control strategies becomes very attractive. In this paper a combination of resonant control and a disturbance estimator is proposed. This solution is able to improve the system performances during the transient motion and also to reject the disturbance forces acting on the system. Both control logics are based on a modal approach, since it allows to describe the structure dynamics considering only few degrees of freedom.

  5. Non-linear vibrational response of Ge and SiC membranes

    Science.gov (United States)

    Zhou, L. Q.; Colston, G.; Pearce, M. J.; Prince, R. G.; Myronov, M.; Leadley, D. R.; Trushkevych, O.; Edwards, R. S.

    2017-07-01

    Characterisation of membranes produced for use as micro-electro-mechanical systems using vibrational techniques can give a measure of their behaviour and suitability for operation in different environments. Two membranes are studied here: germanium (Ge) and cubic silicon carbide (3C-SiC) on a silicon (Si) substrate. When driven at higher displacements, the membranes exhibit self-protecting behaviour. The resonant vibration amplitude is limited to a maximum value of around 10 nm, through dissipation of energy via higher harmonic vibrations. This is observed for both materials, despite their different Young's moduli and defect densities.

  6. Discussion of "A new method for predicting nonlinear structural vibrations induced by ground impact loading" by Jun Liu, Yu Zhang, Bin Yun, Journal of Sound and Vibration, 331 (2012) 2129-2140

    Science.gov (United States)

    Svinkin, Mark R.

    2016-12-01

    The authors suggested a hybrid method for modeling the time history of structural vibrations triggered by impact dynamic loads from construction equipment and blasting, and they stated, "In this work, a hybrid method has been proposed to calculate the theoretical seismograms of structural vibrations. The word "hybrid" denotes a combination of field measurements and computer simulations. Then, based on nonlinear system theory, a novel method is proposed to predict the signal induced by impact loading".

  7. New recursive-least-squares algorithms for nonlinear active control of sound and vibration using neural networks.

    Science.gov (United States)

    Bouchard, M

    2001-01-01

    In recent years, a few articles describing the use of neural networks for nonlinear active control of sound and vibration were published. Using a control structure with two multilayer feedforward neural networks (one as a nonlinear controller and one as a nonlinear plant model), steepest descent algorithms based on two distinct gradient approaches were introduced for the training of the controller network. The two gradient approaches were sometimes called the filtered-x approach and the adjoint approach. Some recursive-least-squares algorithms were also introduced, using the adjoint approach. In this paper, an heuristic procedure is introduced for the development of recursive-least-squares algorithms based on the filtered-x and the adjoint gradient approaches. This leads to the development of new recursive-least-squares algorithms for the training of the controller neural network in the two networks structure. These new algorithms produce a better convergence performance than previously published algorithms. Differences in the performance of algorithms using the filtered-x and the adjoint gradient approaches are discussed in the paper. The computational load of the algorithms discussed in the paper is evaluated for multichannel systems of nonlinear active control. Simulation results are presented to compare the convergence performance of the algorithms, showing the convergence gain provided by the new algorithms.

  8. Nonlinear and chaotic vibration and stability analysis of an aero-elastic piezoelectric FG plate under parametric and primary excitations

    Science.gov (United States)

    Rezaee, Mousa; Jahangiri, Reza

    2015-05-01

    In this study, in the presence of supersonic aerodynamic loading, the nonlinear and chaotic vibrations and stability of a simply supported Functionally Graded Piezoelectric (FGP) rectangular plate with bonded piezoelectric layer have been investigated. It is assumed that the plate is simultaneously exposed to the effects of harmonic uniaxial in-plane force and transverse piezoelectric excitations and aerodynamic loading. It is considered that the potential distribution varies linearly through the piezoelectric layer thickness, and the aerodynamic load is modeled by the first order piston theory. The von-Karman nonlinear strain-displacement relations are used to consider the geometrical nonlinearity. Based on the Classical Plate Theory (CPT) and applying the Hamilton's principle, the nonlinear coupled partial differential equations of motion are derived. The Galerkin's procedure is used to reduce the equations of motion to nonlinear ordinary differential Mathieu equations. The validity of the formulation for analyzing the Limit Cycle Oscillation (LCO), aero-elastic stability boundaries is accomplished by comparing the results with those of the literature, and the convergence study of the FGP plate is performed. By applying the Multiple Scales Method, the case of 1:2 internal resonance and primary parametric resonance are taken into account and the corresponding averaged equations are derived and analyzed numerically. The results are provided to investigate the effects of the forcing/piezoelectric detuning parameter, amplitude of forcing/piezoelectric excitation and dynamic pressure, on the nonlinear dynamics and chaotic behavior of the FGP plate. It is revealed that under the certain conditions, due to the existence of bi-stable region of non-trivial solutions, system shows the hysteretic behavior. Moreover, in absence of airflow, it is observed that variation of control parameters leads to the multi periodic and chaotic motions.

  9. Nonlinear modeling of tuned liquid dampers (TLDs) in rotating wind turbine blades for damping edgewise vibrations

    DEFF Research Database (Denmark)

    Zhang, Zili; Nielsen, Søren R. K.; Basu, Biswajit

    2015-01-01

    Tuned liquid dampers (TLDs) utilize the sloshing motion of the fluid to suppress structural vibrations and become a natural candidate for damping vibrations in rotating wind turbine blades. The centrifugal acceleration at the tip of a wind turbine blade can reach a magnitude of 7–8g. This facilit......Tuned liquid dampers (TLDs) utilize the sloshing motion of the fluid to suppress structural vibrations and become a natural candidate for damping vibrations in rotating wind turbine blades. The centrifugal acceleration at the tip of a wind turbine blade can reach a magnitude of 7–8g...... studied in the numerical simulation. It is shown that the one-mode model is able to predict the sloshing force and the damped structural response accurately, since the primary damping effect on the structure is achieved by the first sloshing mode of the fluid. Although it is unable to predict the fluid...

  10. Theoretical study of highly vibrational states of nonlinear triatomic molecules using Lie algebraic approach

    Institute of Scientific and Technical Information of China (English)

    郑雨军; 丁世良

    2000-01-01

    The vibrational excitations of bent triatomic molecules are studied by using Lie algebra. The RMS error of fitting 30 spectroscopic data is 1.66 cm-1 for SO2. The results show that the expansion of a molecular algebraic Hamiltonian can well describe the experimental data. And the total vibrational levels can be calculated using this Hamiltonian. At the same time, the potential energy surface can also be obtained with the algebraic Hamiltonian.

  11. Nonlinear vibration and stability of rotating, pretwisted, preconed blades including Coriolis effects

    Science.gov (United States)

    Subrahmanyam, K. B.; Kaza, K. R. V.; Brown, G. V.; Lawrence, C.

    1987-01-01

    The coupled bending-bending-torsional equations of dynamic motion of rotating, linearly pretwisted blades are derived including large precone, second degree geometric nonlinearities and Coriolis effects. The equations are solved by the Galerkin method and a linear perturbation technique. Accuracy of the present method is verified by conparisons of predicted frequencies and steady state deflections with those from MSC/NASTRAN and from experiments. Parametric results are generated to establish where inclusion of only the second degree geometric nonlinearities is adequate. The nonlinear terms causing torsional divergence in thin blades are identified. The effects of Coriolis terms and several other structurally nonlinear terms are studied, and their relative importance is examined.

  12. Nonlinear bending-torsional vibration and stability of rotating, pretwisted, preconed blades including Coriolis effects

    Science.gov (United States)

    Subrahmanyam, K. B.; Kaza, K. R. V.; Brown, G. V.; Lawrence, C.

    1986-01-01

    The coupled bending-bending-torsional equations of dynamic motion of rotating, linearly pretwisted blades are derived including large precone, second degree geometric nonlinearities and Coriolis effects. The equations are solved by the Galerkin method and a linear perturbation technique. Accuracy of the present method is verified by comparisons of predicted frequencies and steady state deflections with those from MSC/NASTRAN and from experiments. Parametric results are generated to establish where inclusion of only the second degree geometric nonlinearities is adequate. The nonlinear terms causing torsional divergence in thin blades are identified. The effects of Coriolis terms and several other structurally nonlinear terms are studied, and their relative importance is examined.

  13. 用于直升机振动控制的主动调谐式吸振器研究%Research of an Active Tunable Vibration Absorber for Helicopter Vibration Control

    Institute of Scientific and Technical Information of China (English)

    陈勇; David G.Zimcik; Viresh K.Wickramasinghe; Fred Nitzsche

    2003-01-01

    振动问题是直升机设计中的难题,会导致机体结构疲劳、舒适性降低和高噪声等问题.通常的单桨叶控制方案由于受压电驱动器机电性能的限制而难以实现.智能弹簧是一种采用单桨叶控制原理的主动调谐式吸振器,它通过压电驱动器自适应控制桨叶根部的结构阻抗,达到振动控制目的.建立了智能弹簧的简化模型,对其谐波响应控制特性进行研究;采用频率分析和数字信号合成技术产生参考信号,在DSP平台上设计自适应陷波算法对智能弹簧驱动器组件进行控制;模拟和风洞实验结果均表明智能弹簧能够在较宽频率范围内对桨叶的谐波响应进行有效控制,验证了通过主动阻抗控制实现直升机桨叶振动控制的可行性.%Significant structural vibration is an undesirable characteristic in helicopter flight that leads to structural fatigue, poor ride quality for passengers and high acoustic signature. Previous Individual Blade Control (IBC) techniques to reduce these effects have been hindered by electromechanical limitations of piezoelectric actuators. The Smart Spring is an active tunable vibration absorber using IBC approach to adaptively alter the "structural impedance" at the blade root. In this paper, a mathematical model was developed to predict the response under harmonic excitations. An adaptive notch algorithm was designed and implemented on a TMS320c40 DSP platform. Reference signal synthesis techniques were used to automatically track the shifts in the fundamental vibratory frequency due to variations in flight conditions. Closed-loop tests performed on the proof-of-concept hardware achieved significant vibration suppression at harmonic peaks as well as the broadband reduction in vibration. The investigation verified the capability of the Smart Spring to suppress multiple harmonic components in blade vibration through active impedance control.

  14. Dynamic Analysis on Vibration Absorber of PVDF Grain Detecting Sensor%PVDF谷物传感器减振结构的动力学分析

    Institute of Scientific and Technical Information of China (English)

    赵湛; 李耀明; 陈义; 梁振伟

    2013-01-01

    为了实现联合收割机工作过程中谷物损失量的实时测量,研究以聚偏氟乙烯(polyvinylidene fluoride,简称PVDF)压电薄膜作为敏感元件的谷物检测传感器,通过由电荷放大、带通滤波、包络检波和电压比较器等构成的信号调制电路,实现谷物冲击信号的检测.为了减小联合收割机振动的干扰,传感器设计为双层隔振结构,分析了减振系统的动力学特性,数值模拟瞬时冲击作用下的响应.将传感器安装在联合收割机振动筛尾端支架上进行谷物检测实验,结果表明,通过合理选择减振材料和调制电路参数,传感器能够从振动噪声背景中有效提取谷粒冲击信号.%To measure the grain loss of combine harvester in real-time, a grain detecting sensor using piezo-electric polyvinylidene fluoride (PVDF) films as sensitive material is presented. Signal processing circuit which is composed of a charge amplifier, band-pass filter, envelope detector and voltage comparator is designed to detect grain impact signal. Double-layer vibration isolation is incorporated in the sensor to e-liminate the influence of combine harvester's vibration. Based on the dynamic analysis of the absorbing system, the sensor response under instantaneous triangular wave-impact is numerical simulated. Then, grain detecting experiments are carried out by assembling the sensor on a support stand which fixed on the vibrating cleaning sieve, the results show that with proper setting the parameters of damping material and processing circuit, the sensor can identify grain impact signal effectively from vibrating noise.

  15. Linear and third- and fifth-order nonlinear spectroscopies of a charge transfer system coupled to an underdamped vibration

    Energy Technology Data Exchange (ETDEWEB)

    Dijkstra, Arend G., E-mail: arend.dijkstra@mpsd.mpg.de, E-mail: tanimura@kuchem.kyoto-u.ac.jp [Max Planck Institute for the Structure and Dynamics of Matter, Hamburg (Germany); Tanimura, Yoshitaka, E-mail: arend.dijkstra@mpsd.mpg.de, E-mail: tanimura@kuchem.kyoto-u.ac.jp [Department of Chemistry, Kyoto University, Kyoto (Japan)

    2015-06-07

    We study hole, electron, and exciton transports in a charge transfer system in the presence of underdamped vibrational motion. We analyze the signature of these processes in the linear and third-, and fifth-order nonlinear electronic spectra. Calculations are performed with a numerically exact hierarchical equations of motion method for an underdamped Brownian oscillator spectral density. We find that combining electron, hole, and exciton transfers can lead to non-trivial spectra with more structure than with excitonic coupling alone. Traces taken during the waiting time of a two-dimensional (2D) spectrum are dominated by vibrational motion and do not reflect the electron, hole, and exciton dynamics directly. We find that the fifth-order nonlinear response is particularly sensitive to the charge transfer process. While third-order 2D spectroscopy detects the correlation between two coherences, fifth-order 2D spectroscopy (2D population spectroscopy) is here designed to detect correlations between the excited states during two different time periods.

  16. Linear and third- and fifth-order nonlinear spectroscopies of a charge transfer system coupled to an underdamped vibration.

    Science.gov (United States)

    Dijkstra, Arend G; Tanimura, Yoshitaka

    2015-06-01

    We study hole, electron, and exciton transports in a charge transfer system in the presence of underdamped vibrational motion. We analyze the signature of these processes in the linear and third-, and fifth-order nonlinear electronic spectra. Calculations are performed with a numerically exact hierarchical equations of motion method for an underdamped Brownian oscillator spectral density. We find that combining electron, hole, and exciton transfers can lead to non-trivial spectra with more structure than with excitonic coupling alone. Traces taken during the waiting time of a two-dimensional (2D) spectrum are dominated by vibrational motion and do not reflect the electron, hole, and exciton dynamics directly. We find that the fifth-order nonlinear response is particularly sensitive to the charge transfer process. While third-order 2D spectroscopy detects the correlation between two coherences, fifth-order 2D spectroscopy (2D population spectroscopy) is here designed to detect correlations between the excited states during two different time periods.

  17. Intramolecular charge delocalization and nonlinear optical properties of push-pull chromophore 1-(4-N,N-dimethylaminopyridinium) acetic acid bromide monohydrate from vibrational spectra.

    Science.gov (United States)

    John, C Jesintha; Amalanathan, M; Sajan, D; Lakshmi, K Udaya; Joe, I Hubert

    2011-01-01

    FT-Raman and FT-IR spectra of the nonlinear optical crystal 1-(4-N,N-dimethylaminopyridinium) acetic acid bromide monohydrate have been recorded and analyzed. The equilibrium geometry, vibrational wavenumbers and the first order hyperpolarizability of the crystal have been calculated with the help of density functional theory computations. The assignments of the vibrational spectra have been carried out with the help of Scaled Quantum Mechanic force field theory. Optimized geometry gives the charge transfer interaction of the pyridine ring and the amino group in the electron-donor side of the nonlinear optic chromophore. Electron-phonon coupling and O-H⋯O interactions in making the molecule nonlinear optical active have been analyzed based on the vibrational spectral features. The Natural Bond Orbital analysis confirms the occurrence of strong intermolecular O-H⋯O hydrogen bonding. Copyright © 2010 Elsevier B.V. All rights reserved.

  18. A study of anharmonic al and nonlinear behaviours of vibrations of atomic nuclei; Etude des comportements anharmonioques et non lineaires des vibrations des noyaux atomiques

    Energy Technology Data Exchange (ETDEWEB)

    Volpe, M.C. [Caen Univ., 14 (France)

    1997-12-31

    Double Giant Resonances, vibrational states in which a Giant Resonance is excited on top of another Giant Resonance, have been in the last years the object of many theories and studies. Whereas the measured energies and widths of these states agree with a theoretical predictions, the measured excitation cross sections on the other hand are almost always larger than the calculated ones. The standard theoretical approaches are based both on a harmonic approximation for the collective motion on the nucleus and on its linear response to an external field. In this work the influence of anharmonicities and non-linearities in the external field on the excitation of Double Giant Resonances are studied. First, an oscillator model and an extension of the Lipkin-Meshkow-Glick model are used to study the effects of anharmonicities and non-linearities on the excitation probabilities. The results show that these terms can influence the excitation probability of the second excited state in a significant way. Secondly, these exactly soluble schematic models are used to study some of the approximations made in microscopic calculations based on boson expansion methods and also some aspects on the time-dependent mean field approach. Finally, a microscopic calculation of the Coulomb excitation cross sections of Double Giant Resonances is presented for several nuclei. It is found that, for {sup 208} Pb, the inclusion of anharmonicities and non-linearities and the consideration of many states that play a role in the excitation process give a satisfactory agreement between calculated and observed cross sections. (author). 113 refs.

  19. On the vibrations of a simply supported square plate on a weakly nonlinear elastic foundation

    NARCIS (Netherlands)

    Zarubinskaya, M.A.; Van Horssen, W.T.

    2003-01-01

    In this paper an initial-boundary value problem for a weakly nonlinear plate equation with a quadratic nonlinearity will be studied. This initial-boundary value problem can be regarded as a simple model describing free oscillations of a simply supported square plate on an elastic foundation. It is a

  20. Experimental verification of a bridge-shaped, nonlinear vibration energy harvester

    Energy Technology Data Exchange (ETDEWEB)

    Gafforelli, Giacomo, E-mail: giacomo.gafforelli@polimi.it; Corigliano, Alberto [Department of Civil and Environmental Engineering, Politecnico di Milano, Milano, 20133 (Italy); Xu, Ruize; Kim, Sang-Gook [Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139 (United States)

    2014-11-17

    This paper reports a comprehensive modeling and experimental characterization of a bridge shaped nonlinear energy harvester. A doubly clamped beam at large deflection requires stretching strain in addition to the bending strain to be geometrically compatible, which stiffens the beam as the beam deflects and transforms the dynamics to a nonlinear regime. The Duffing mode non-linear resonance widens the frequency bandwidth significantly at higher frequencies than the linear resonant frequency. The modeling includes a nonlinear measure of strain coupled with piezoelectric constitutive equations which end up in nonlinear coupling terms in the equations of motion. The main result supports that the power generation is bounded by the mechanical damping for both linear and nonlinear harvesters. Modeling also shows the power generation is over a wider bandwidth in the nonlinear case. A prototype is manufactured and tested to measure the power generation at different load resistances and acceleration amplitudes. The prototype shows a nonlinear behavior with well-matched experimental data to the modeling.

  1. Optimization of a nonlinear model for predicting the ground vibration using the combinational particle swarm optimization-genetic algorithm

    Science.gov (United States)

    Samareh, Hossein; Khoshrou, Seyed Hassan; Shahriar, Kourosh; Ebadzadeh, Mohammad Mehdi; Eslami, Mohammad

    2017-09-01

    When particle's wave velocity resulting from mining blasts exceeds a certain level, then the intensity of produced vibrations incur damages to the structures around the blasting regions. Development of mathematical models for predicting the peak particle velocity (PPV) based on the properties of the wave emission environment is an appropriate method for better designing of blasting parameters, since the probability of incurred damages can considerably be mitigated by controlling the intensity of vibrations at the building sites. In this research, first out of 11 blasting and geo-mechanical parameters of rock masses, four parameters which had the greatest influence on the vibrational wave velocities were specified using regression analysis. Thereafter, some models were developed for predicting the PPV by nonlinear regression analysis (NLRA) and artificial neural network (ANN) with correlation coefficients of 0.854 and 0.662, respectively. Afterward, the coefficients associated with the parameters in the NLRA model were optimized using optimization particle swarm-genetic algorithm. The values of PPV were estimated for 18 testing dataset in order to evaluate the accuracy of the prediction and performance of the developed models. By calculating statistical indices for the test recorded maps, it was found that the optimized model can predict the PPV with a lower error than the other two models. Furthermore, considering the correlation coefficient (0.75) between the values of the PPV measured and predicted by the optimized nonlinear model, it was found that this model possesses a more desirable performance for predicting the PPV than the other two models.

  2. Nonlinear Vibration Induced by the Water-film Whirl and Whip in a Sliding Bearing Rotor System

    Institute of Scientific and Technical Information of China (English)

    ZHAI Liming; LUO Yongyao; WANG Zhengwei; KITAUCHI Seishiro; MIYAGAWA Kazuyoshi

    2016-01-01

    Many industrial applications and experiments have shown that sliding bearings often experience fluid film whip due to nonlinear fluid film forces which can cause rotor-stator rub-impact failures. The oil-film whips have attracted many studies while the water-film whips in the water lubricated sliding bearing have been little researched with the mechanism still an open problem. The dynamic fluid film forces in a water sliding bearing are investigated numerically with rotational, whirling and squeezing motions of the journal using a nonlinear model to identify the relationships between the three motions. Rotor speed-up and slow-down experiments are then conducted with the rotor system supported by a water lubricated sliding bearing to induce the water-film whirl/whip and verify the relationship. The experimental results show that the vibrations of the journal alternated between increasing and decreasing rather than continuously increasing as the rotational speed increased to twice the first critical speed, which can be explained well by the nonlinear model. The radial growth rate of the whirl motion greatly affects the whirl frequency of the journal and is responsible for the frequency lock in the water-film whip. Further analysis shows that increasing the lubricating water flow rate changes the water-film whirl/whip characteristics, reduces the first critical speed, advances the time when significant water-film whirling motion occurs, and also increases the vibration amplitude at the bearing center which may lead to the rotor-stator rub-impact. The study gives the insight into the water-film whirl and whip in the water lubricated sliding bearing.

  3. Nonlinear vibration induced by the water-film whirl and whip in a sliding bearing rotor system

    Science.gov (United States)

    Zhai, Liming; Luo, Yongyao; Wang, Zhengwei; Kitauchi, Seishiro; Miyagawa, Kazuyoshi

    2016-03-01

    Many industrial applications and experiments have shown that sliding bearings often experience fluid film whip due to nonlinear fluid film forces which can cause rotor-stator rub-impact failures. The oil-film whips have attracted many studies while the water-film whips in the water lubricated sliding bearing have been little researched with the mechanism still an open problem. The dynamic fluid film forces in a water sliding bearing are investigated numerically with rotational, whirling and squeezing motions of the journal using a nonlinear model to identify the relationships between the three motions. Rotor speed-up and slow-down experiments are then conducted with the rotor system supported by a water lubricated sliding bearing to induce the water-film whirl/whip and verify the relationship. The experimental results show that the vibrations of the journal alternated between increasing and decreasing rather than continuously increasing as the rotational speed increased to twice the first critical speed, which can be explained well by the nonlinear model. The radial growth rate of the whirl motion greatly affects the whirl frequency of the journal and is responsible for the frequency lock in the water-film whip. Further analysis shows that increasing the lubricating water flow rate changes the water-film whirl/whip characteristics, reduces the first critical speed, advances the time when significant water-film whirling motion occurs, and also increases the vibration amplitude at the bearing center which may lead to the rotor-stator rub-impact. The study gives the insight into the water-film whirl and whip in the water lubricated sliding bearing.

  4. Using strong nonlinearity and high-frequency vibrations to control effective properties of discrete elastic waveguides

    DEFF Research Database (Denmark)

    Lazarov, Boyan Stefanov; Thomsen, Jon Juel; Snaeland, Sveinn Orri

    2008-01-01

    The aim of this article is to investigate how highfrequency (HF) excitation, combined with strong nonlinear elastic material behavior, influences the effective material or structural properties for low-frequency excitation and wave propagation. The HF effects are demonstrated on discrete linear s...... spring-mass chains with non-linear inclusions. The presented analytical and numerical results suggest that the effective material properties can easily be altered by establishing finite amplitude HF standing waves in the non-linear regions of the chain....

  5. Analyzing the nonlinear vibrational wave differential equation for the simplified model of Tower Cranes by Algebraic Method

    Science.gov (United States)

    Akbari, M. R.; Ganji, D. D.; Ahmadi, A. R.; Kachapi, Sayyid H. Hashemi

    2014-03-01

    In the current paper, a simplified model of Tower Cranes has been presented in order to investigate and analyze the nonlinear differential equation governing on the presented system in three different cases by Algebraic Method (AGM). Comparisons have been made between AGM and Numerical Solution, and these results have been indicated that this approach is very efficient and easy so it can be applied for other nonlinear equations. It is citable that there are some valuable advantages in this way of solving differential equations and also the answer of various sets of complicated differential equations can be achieved in this manner which in the other methods, so far, they have not had acceptable solutions. The simplification of the solution procedure in Algebraic Method and its application for solving a wide variety of differential equations not only in Vibrations but also in different fields of study such as fluid mechanics, chemical engineering, etc. make AGM be a powerful and useful role model for researchers in order to solve complicated nonlinear differential equations.

  6. Nonlinear Dynamics of a Spring-Supported Piston in a Vibrated Liquid-Filled Housing: I. Analysis

    Science.gov (United States)

    Torczynski, J. R.; O'Hern, T. J.; Clausen, J. R.

    2016-11-01

    The nonlinear dynamics of a piston supported by a spring in a vibrated liquid-filled housing is analyzed. The liquid is viscous, and the flow passages are narrow and depend on piston position. Ordinarily, the piston motion is highly damped. However, if bellows are added to both ends of the housing, then the piston, liquid, and bellows can execute a collective motion that forces relatively little liquid through the flow passages and thus has low damping and a strong resonance. At this frequency, the motion is large, and the nonlinearity from the flow passages produces a net force on the piston that can cause it to compress its spring. This nonlinear dynamical system is analyzed using a perturbation expansion of the Navier-Stokes equations, and the perturbation results are compared to corresponding ALE Navier-Stokes simulations. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  7. Nonlinear approaches in engineering applications applied mechanics, vibration control, and numerical analysis

    CERN Document Server

    Jazar, Reza

    2015-01-01

    This book focuses on the latest applications of nonlinear approaches in different disciplines of engineering. For each selected topic, detailed concept development, derivations, and relevant knowledge are provided for the convenience of the readers. The topics range from dynamic systems and control to optimal approaches in nonlinear dynamics. The volume includes invited chapters from world class experts in the field. The selected topics are of great interest in the fields of engineering and physics and this book is ideal for engineers and researchers working in a broad range of practical topics and approaches. This book also: ·         Explores the most up-to-date applications and underlying principles of nonlinear approaches to problems in engineering and physics, including sections on analytic nonlinearity and practical nonlinearity ·         Enlightens readers to the conceptual significance of nonlinear approaches with examples of applications in scientific and engineering problems from v...

  8. Nonlinear flap-lag-extensional vibrations of rotating, pretwisted, preconed beams including Coriolis effects

    Science.gov (United States)

    Subrahmanyam, K. B.; Kaza, K. R. V.

    1985-01-01

    The effects of pretwist, precone, setting angle, Coriolis forces and second degree geometric nonlinearities on the natural frequencies, steady state deflections and mode shapes of rotating, torsionally rigid, cantilevered beams were studied. The governing coupled equations of flap lag extensional motion are derived including the effects of large precone and retaining geometric nonlinearities up to second degree. The Galerkin method, with nonrotating normal modes, is used for the solution of both steady state nonlinear equations and linear perturbation equations. Parametric indicating the individual and collective effects of pretwist, precone, Coriolis forces and second degree geometric nonlinearities on the steady state deflection, natural frequencies and mode shapes of rotating blades are presented. It is indicated that the second degree geometric nonlinear terms, which vanish for zero precone, can produce frequency changes of engineering significance. Further confirmation of the validity of including those generated by MSC NASTRAN. It is indicated that the linear and nonlinear Coriolis effects must be included in analyzing thick blades. The Coriolis effects are significant on the first flatwise and the first edgewise modes.

  9. Nonlinear Steady-State Vibration Analysis of a Beam with Breathing Cracks

    Science.gov (United States)

    Kamiya, Keisuke; Yoshinaga, Terumitsu

    This paper presents a method for analysis of steady-state vibration of a beam with breathing cracks, which open and close during vibration. There are several papers treating problems of vibration analysis of a beam with breathing cracks. However, due to their treatments of the condition which determines the switch between the open and closed states of the crack, it is difficult for one to obtain steady-state vibration efficiently by methods such as the incremental harmonic balance method. Since opening and closing of a breathing crack depends on the sign of the bending moment, or the curvature, of the beam, the key point to this problem is explicit treatment of the bending moment. The mixed variational principle allows one to use deflection as well as bending moment as primary variables in the governing equation. In this paper a governing equation of a beam with breathing cracks is derived by a finite element procedure based on the mixed variational principle. Then, the derived governing equations are solved by combining the iteration method and the harmonic balance method. Finally, examples of analysis by the presented method are given.

  10. Low-dimensional models for the nonlinear vibration analysis of cylindrical shells based on a perturbation procedure and proper orthogonal decomposition

    Science.gov (United States)

    Gonçalves, P. B.; Silva, F. M. A.; Del Prado, Z. J. G. N.

    2008-08-01

    In formulating mathematical models for dynamical systems, obtaining a high degree of qualitative correctness (i.e. predictive capability) may not be the only objective. The model must be useful for its intended application, and models of reduced complexity are attractive in many cases where time-consuming numerical procedures are required. This paper discusses the derivation of discrete low-dimensional models for the nonlinear vibration analysis of thin cylindrical shells. In order to understand the peculiarities inherent to this class of structural problems, the nonlinear vibrations and dynamic stability of a circular cylindrical shell subjected to static and dynamic loads are analyzed. This choice is based on the fact that cylindrical shells exhibit a highly nonlinear behavior under both static and dynamic loads. Geometric nonlinearities due to finite-amplitude shell motions are considered by using Donnell's nonlinear shallow-shell theory. A perturbation procedure, validated in previous studies, is used to derive a general expression for the nonlinear vibration modes and the discretized equations of motion are obtained by the Galerkin method using modal expansions for the displacements that satisfy all the relevant boundary and symmetry conditions. Next, the model is analyzed via the Karhunen-Loève expansion to investigate the relative importance of each mode obtained by the perturbation solution on the nonlinear response and total energy of the system. The responses of several low-dimensional models are compared. It is shown that rather low-dimensional but properly selected models can describe with good accuracy the response of the shell up to very large vibration amplitudes.

  11. Optimized geometry, vibration (IR and Raman spectra and nonlinear optical activity of p-nitroanilinium perchlorate molecule: A theoretical study

    Directory of Open Access Journals (Sweden)

    Tamer Ömer

    2016-03-01

    Full Text Available The molecular modeling of p-nitroanilinium perchlorate molecule was carried out by using B3LYP and HSEH1PBE levels of density functional theory (DFT. The IR and Raman spectra were simulated and the assignments of vibrational modes were performed on the basis of relative contribution of various internal co-ordinates. NBO analysis was performed to demonstrate charge transfer, conjugative interactions and the formation of intramolecular hydrogen bonding interactions within PNAPC. Obtained large dipole moment values showed that PNAPC is a highly polarizable complex, and the charge transfer occurs within PNAPC. Hydrogen bonding and charge transfer interactions were also displayed by small HOMO-LUMO gap and molecular electrostatic potential (MEP surface. The strong evidences that the material can be used as an efficient nonlinear optical (NLO material of PNAPC were demonstrated by considerable polarizability and hyperpolarizability values obtained at DFT levels.

  12. Electron-phonon metamaterial featuring nonlinear tri-interleaved piezoelectric topologies and its application in low-frequency vibration control

    Science.gov (United States)

    Bao, Bin; Guyomar, Daniel; Lallart, Mickaël

    2016-09-01

    This article proposes a nonlinear tri-interleaved piezoelectric topology based on the synchronized switch damping on inductor (SSDI) technique, which can be applied to phononic metamaterials for elastic wave control and effective low-frequency vibration reduction. A comparison of the attenuation performance is made between piezoelectric phononic metamaterial with distributed SSDI topology (each SSDI shunt being independently connected to a single piezoelectric element) and piezoelectric phononic metamaterial with the proposed electronic topology. Theoretical results show excellent band gap hybridization (near-coupling between Bragg scattering mechanism and wideband resonance mechanism induced by synchronized switch damping networks in piezoelectric phononic metamaterials) with the proposed electronic topology over the investigated frequency domain. Furthermore, piezoelectric phononic metamaterials with proposed electronic topology generated a better low-frequency broadband gap, which is experimentally validated by measuring the harmonic response of a piezoelectric phononic metamaterial beam under clamped-clamped boundary conditions.

  13. Low-Frequency MEMS Electrostatic Vibration Energy Harvester With Corona-Charged Vertical Electrets and Nonlinear Stoppers

    Science.gov (United States)

    Lu, Y.; Cottone, F.; Boisseau, S.; Galayko, D.; Marty, F.; Basset, P.

    2015-12-01

    This paper reports for the first time a MEMS electrostatic vibration energy harvester (e-VEH) with corona-charged vertical electrets on its electrodes. The bandwidth of the 1-cm2 device is extended in low and high frequencies by nonlinear elastic stoppers. With a bias voltage of 46 V (electret@21 V + DC external source@25 V) between the electrodes, the RMS power of the device reaches 0.89 μW at 33 Hz and 6.6 μW at 428 Hz. The -3dB frequency band including the hysteresis is 223∼432 Hz, the one excluding the hysteresis 88∼166 Hz. We also demonstrate the charging of a 47 μF capacitor used for powering a wireless and autonomous temperature sensor node with a data transmission beyond 10 m at 868 MHz.

  14. Free and Forced Vibrations of the Strongly Nonlinear Cubic-Quintic Duffing Oscillators

    Science.gov (United States)

    Karahan, M. M. Fatih; Pakdemirli, Mehmet

    2017-01-01

    Strongly nonlinear cubic-quintic Duffing oscillatoris considered. Approximate solutions are derived using the multiple scales Lindstedt Poincare method (MSLP), a relatively new method developed for strongly nonlinear oscillators. The free undamped oscillator is considered first. Approximate analytical solutions of the MSLP are contrasted with the classical multiple scales (MS) method and numerical simulations. It is found that contrary to the classical MS method, the MSLP can provide acceptable solutions for the case of strong nonlinearities. Next, the forced and damped case is treated. Frequency response curves of both the MS and MSLP methods are obtained and contrasted with the numerical solutions. The MSLP method and numerical simulations are in good agreement while there are discrepancies between the MS and numerical solutions.

  15. Active suppression of nonlinear composite beam vibrations by selected control algorithms

    Science.gov (United States)

    Warminski, Jerzy; Bochenski, Marcin; Jarzyna, Wojciech; Filipek, Piotr; Augustyniak, Michal

    2011-05-01

    This paper is focused on application of different control algorithms for a flexible, geometrically nonlinear beam-like structure with Macro Fiber Composite (MFC) actuator. Based on the mathematical model of a geometrically nonlinear beam, analytical solutions for Nonlinear Saturation Controller (NSC) are obtained using Multiple Scale Method. Effectiveness of different control strategies is evaluated by numerical simulations in Matlab-Simulink software. Then, the Digital Signal Processing (DSP) controller and selected control algorithms are implemented to the physical system to compare numerical and experimental results. Detailed analysis for the NSC system is carried out, especially for high level of amplitude and wide range of frequencies of excitation. Finally, the efficiency of the considered controllers is tested experimentally for a more complex autoparametric " L-shape" beam system.

  16. Using Nonlinear Feedback Control for the Vibration of a Nonlinear Vibration System%利用非线性反馈控制一类振动系统的振动

    Institute of Scientific and Technical Information of China (English)

    张文娟; 俞建宁; 张建刚; 杨留猛

    2013-01-01

    The complex dynamic behavior of the autoparametric system with an attached damped pendulum is studied. The dynamical equation of the system is established using Lagrangian and Newton's second law. The chaotic behavior of the system is analyzed by means of Lyapunov exponent spectrum and the bifurcation diagrams. Nonlinear feedback control method is used to control the chaotic motion state of this vibration system, and then Matlab numerical simulation can prove that nonlinear feedback control method can realize the control of chaotic system, and the method is effective as well.%研究一类带有黏性阻尼摆的振动系统的复杂动力学行为.通过拉格朗日方程和牛顿第二定律,建立此振动系统的动力学方程.借助相图、Lyapunov指数谱和分岔图研究系统的混沌行为,用非线性反馈控制方法对此类振动系统的运动状态进行控制,利用Matlab进行数值仿真.通过受控参数证明利用非线性反馈方法可以实现系统的混沌控制,系统的混沌行为得到了有效控制.

  17. Vibration analysis of nonlinear systems with the bilinear hysteretic oscillator by using incremental harmonic balance method

    Science.gov (United States)

    Xiong, Huai; Kong, Xianren; Li, Haiqin; Yang, Zhenguo

    2017-01-01

    This paper considers dynamics of bilinear hysteretic systems, which are widely used for vibration control and vibration absorption such as magneto-rheological damper, metal-rubber. The method of incremental harmonic balance (IHB) technique that hysteresis is considered in the corrective term is improved in order to determine periodic solutions of bilinear hysteretic systems. The improved continuation method called two points tracing algorithm which is stable to the turning point makes the calculation more efficient for tracing amplitude-frequency response. Precise Hsu's method for analysing the stability of periodic solutions is introduced. The effects of different parameters of bilinear hysteretic oscillator on the response are discussed numerically. Some numerical simulations of considered bilinear hysteretic systems, including a single DOF and a 2DOF system, are effectively obtained by the modified IHB method and the results compare very well with the 4-oder Runge-Kutta method.

  18. Quantum chemical studies on structural, vibrational, nonlinear optical properties and chemical reactivity of indigo carmine dye

    Science.gov (United States)

    El-Mansy, M. A. M.

    2017-08-01

    Structural and vibrational spectroscopic studies were performed on indigo carmine (IC) isomers using FT-IR spectral analysis along with DFT/B3LYP method utilizing Gaussian 09 software. GaussView 5 program has been employed to perform a detailed interpretation of vibrational spectra. Simulation of infrared spectra has led to an excellent overall agreement with the observed spectral patterns. Mulliken population analyses on atomic charges, MEP, HOMO-LUMO, NLO, first order hyperpolarizability and thermodynamic properties have been examined by (DFT/B3LYP) method with the SDD basis set level. Density of state spectra (DOS) were calculated using GaussSum 3 at the same level of theory. Molecular modeling approved that DOS Spectra are the most significant tools for differentiating between two IC isomers so far. Moreover, The IC isomers (cis-isomer) have shown an extended applicability for manufacturing both NLO and photovoltaic devices such as solar cells.

  19. Harvesting Energy from Random Mechanical Vibrations Using Linear and Nonlinear Electromechanical Systems: Comparison of Different Noises

    Directory of Open Access Journals (Sweden)

    Zahra Etesami

    2017-05-01

    Full Text Available We investigate harvesting electrical energy from Gaussian white, Gaussian colored, telegraph and random phase-random amplitude (RARP noises, using linear and nonlinear electromechanical systems. We show that the output power of the linear system with one or two degrees of freedom, is maximum for the Gaussian white noise. The response of the system with two degrees of freedom is widened in a larger frequency domain compared to that of a single degree of freedom system. A nonlinear system generates more power than a linear one.

  20. A numerical-perturbation method for the nonlinear analysis of structural vibrations

    Science.gov (United States)

    Nayfeh, A. H.; Mook, D. T.; Lobitz, D. W.

    1974-01-01

    A numerical-perturbation method is proposed for the determination of the nonlinear forced response of structural elements. Purely analytical techniques are capable of determining the response of structural elements having simple geometries and simple variations in thickness and properties, but they are not applicable to elements with complicated structure and boundaries. Numerical techniques are effective in determining the linear response of complicated structures, but they are not optimal for determining the nonlinear response of even simple elements when modal interactions take place due to the complicated nature of the response. Therefore, the optimum is a combined numerical and perturbation technique. The present technique is applied to beams with varying cross sections.

  1. Vibrational spectroscopic, structural and nonlinear optical activity studies on 2-amino-3-chloro-5-trifluoromethyl pyridine: A DFT approach

    Science.gov (United States)

    Asath, R. Mohamed; Premkumar, S.; Rekha, T. N.; Jawahar, A.; Mathavan, T.; Benial, A. Milton Franklin

    2016-05-01

    The conformational analysis was carried out for 2-amino-3-chloro-5-trifluoromethylpyridine using potential energy surface (PES) scan and the most stable optimized conformer was predicted. The theoretical vibrational frequencies were calculated for the optimized geometry using DFT/B3LYP cc-pVQZ basis set by Gaussian 09 Program. The vibrational frequencies were assigned on the basis of potential energy distribution calculation using VEDA 4.0 program package. The Mulliken atomic charge values were calculated. In the Frontier molecular orbitals analysis, the molecular reactivity, kinetic stability, intermolecular charge transfer studies and the calculation of ionization energy, electron affinity, global hardness, chemical potential, electrophilicity index and softness of the molecule were carried out. The nonlinear optical (NLO) activity was studied and the first order hyperpolarizability value was computed, which was 3.48 times greater than the urea. The natural bond orbital analysis was also performed to confirm the NLO activity of the molecule. Hence, the ACTP molecule is a promising candidate for NLO materials.

  2. NON-LINEAR VIBRATION MODELING WITH THE HELP OF FUNCTIONAL SERIES

    Directory of Open Access Journals (Sweden)

    Z. M. Ghasanov

    2010-06-01

    Full Text Available The algorithm of modeling the significantly nonlinear processes – «black boxes» – is offered. It uses functional series. The algorithm is described on the example of modeling of complex oscillations, which occur in acoustic flaw detection.

  3. Approximate and numerical analysis of nonlinear forced vibration of axially moving viscoelastic beams

    Institute of Scientific and Technical Information of China (English)

    Hu Ding; Li-Qun Chen

    2011-01-01

    Steady-state periodical response is investigated for an axially moving viscoelastic beam with hybrid supports via approximate analysis with numerical confirmation.It is assumed that the excitation is spatially uniform and temporally harmonic. The transverse motion of axially moving beams is governed by a nonlinear partial-differential equation and a nonlinear integro-partial-differential equation. The material time derivative is used in the viscoelastic constitutive relation. The method of multiple scales is applied to the governing equations to investigate primary resonances under general boundary conditions. It is demonstrated that the mode uninvolved in the resonance has no effect on the steady-state response. Numerical examples are presented to demonstrate the effects of the boundary constraint stiffness on the amplitude and the stability of the steady-state response. The results derived for two governing equations are qualitatively the same, but quantitatively different. The differential quadrature schemes are developed to verify those results via the method of multiple scales.

  4. Assessment of nonlinear distortions in modal testing and analysis of vibrating automotive structures

    Science.gov (United States)

    Verboven, P.; Guillaume, P.; Vanlanduit, S.; Cauberghe, B.

    2006-05-01

    In this paper, new developments for the nonparametric processing of modal test data are presented. Classically, random noise signals are applied to deal with possible nonlinear distortions during frequency response function measurements of linear dynamic systems. However, the use of multisine excitation signals allows the engineer to control much more his experiments. First of all, the nonparametric estimation of multivariable frequency response functions can be more easily based on an "errors-in-variables" stochastic framework. In addition, the application of a well-chosen multisine excitation permits improvement of the data quality, as well as the detection, qualification and quantification of nonlinear distortions during FRF measurements. To make the presented techniques available for multi-input modal testing, attention is paid to the design of optimal multi-input excitations by maximizing the Fisher information matrix as well as minimizing the crest factor of the applied excitation.

  5. Random vibration of linear and nonlinear structural systems with singular matrices: A frequency domain approach

    Science.gov (United States)

    Kougioumtzoglou, I. A.; Fragkoulis, V. C.; Pantelous, A. A.; Pirrotta, A.

    2017-09-01

    A frequency domain methodology is developed for stochastic response determination of multi-degree-of-freedom (MDOF) linear and nonlinear structural systems with singular matrices. This system modeling can arise when a greater than the minimum number of coordinates/DOFs is utilized, and can be advantageous, for instance, in cases of complex multibody systems where the explicit formulation of the equations of motion can be a nontrivial task. In such cases, the introduction of additional/redundant DOFs can facilitate the formulation of the equations of motion in a less labor intensive manner. Specifically, relying on the generalized matrix inverse theory, a Moore-Penrose (M-P) based frequency response function (FRF) is determined for a linear structural system with singular matrices. Next, relying on the M-P FRF a spectral input-output (excitation-response) relationship is derived in the frequency domain for determining the linear system response power spectrum. Further, the above methodology is extended via statistical linearization to account for nonlinear systems. This leads to an iterative determination of the system response mean vector and covariance matrix. Furthermore, to account for singular matrices, the generalization of a widely utilized formula that facilitates the application of statistical linearization is proved as well. The formula relates to the expectation of the derivatives of the system nonlinear function and is based on a Gaussian response assumption. Several linear and nonlinear MDOF structural systems with singular matrices are considered as numerical examples for demonstrating the validity and applicability of the developed frequency domain methodology.

  6. Nonlinear Vibrations of FGM Cylindrical Panel with Simply Supported Edges in Air Flow

    Directory of Open Access Journals (Sweden)

    Y. X. Hao

    2015-01-01

    Full Text Available Chaotic and periodic motions of an FGM cylindrical panel in hypersonic flow are investigated. The cylindrical panel is also subjected to in-plane external loads and a linear temperature variation in the thickness direction. The temperature dependent material properties of panel which are assumed to be changed through the thickness direction only can be determined by a simple power distribution in terms of the volume fractions. With Hamilton’s principle for an elastic body, a nonlinear dynamical model based on Reddy’s first-order shear deformation shell theory and von Karman type geometric nonlinear relationship is derived in the form of partial equations. A third-order piston theory is adopted to evaluate the hypersonic aerodynamic load. Here, Galerkin’s method is employed to discretize this continuous nonlinear dynamic system to ordinary differential governing equations involving two degrees of freedom. The chaotic and periodic response are studied by the direct numerical simulation method for influences of different Mach number and the value of in-plane load. The bifurcations, Poincare section, waveform, and phase plots are presented.

  7. A semi-active H∞ control strategy with application to the vibration suppression of nonlinear high-rise building under earthquake excitations.

    Science.gov (United States)

    Yan, Guiyun; Chen, Fuquan; Wu, Yingxiong

    2016-01-01

    Different from previous researches which mostly focused on linear response control of seismically excited high-rise buildings, this study aims to control nonlinear seismic response of high-rise buildings. To this end, a semi-active control strategy, in which H∞ control algorithm is used and magneto-rheological dampers are employed for an actuator, is presented to suppress the nonlinear vibration. In this strategy, a modified Kalman-Bucy observer which is suitable for the proposed semi-active strategy is developed to obtain the state vector from the measured semi-active control force and acceleration feedback, taking into account of the effects of nonlinearity, disturbance and uncertainty of controlled system parameters by the observed nonlinear accelerations. Then, the proposed semi-active H∞ control strategy is applied to the ASCE 20-story benchmark building when subjected to earthquake excitation and compared with the other control approaches by some control criteria. It is indicated that the proposed semi-active H∞ control strategy provides much better control performances by comparison with the semi-active MPC and Clipped-LQG control approaches, and can reduce nonlinear seismic response and minimize the damage in the buildings. Besides, it enhances the reliability of the control performance when compared with the active control strategy. Thus, the proposed semi-active H∞ control strategy is suitable for suppressing the nonlinear vibration of high-rise buildings.

  8. 在卫星飞轮上采用机械变频的动力吸振技术%Application of Tunable Vibration Absorber to Satellite’s Flywheels Based on Mechanical Tuning Technology

    Institute of Scientific and Technical Information of China (English)

    黄俊杰; 周徐斌; 申军烽; 虞自飞

    2014-01-01

    为拓宽动力吸振器的工作频带,以满足卫星飞轮振动控制的需求,提出了一种新型的基于机械变频技术的动力吸振器结构,对该变型结构的工作原理进行理论分析和实验研究后表明,机械变频装置的引入,可以有效地将动力吸振器的工作频带拓宽到20 Hz。由此,能够有效抑制飞轮安装板的对于飞轮振动的响应幅值,频率调节范围增大;而且结构紧凑,可靠性高。这一改进的动力吸振技术为卫星飞轮振动控制提供了新的研究方法。%In order to extend the vibration absorber’s bandwidth and meet the requirement of vibration control for satellite flywheels, a new kind of tunable dynamic vibration absorbers based on mechanical tuning technology is presented. Its working principle is briefly introduced. Theoretical analysis and experimental study show that the mechanical tuning device can effectively extend the dynamic vibration absorber’s bandwidth to about 20 Hz. This research of tunable dynamic vibration absorbing technology provides a new method for satellite flywheel’s vibration control.

  9. Impact Vibration Attenuation for a Flexible Robotic Manipulator through Transfer and Dissipation of Energy

    Directory of Open Access Journals (Sweden)

    Yushu Bian

    2013-01-01

    Full Text Available Due to the presence of system flexibility, impact can excite severe large amplitude vibration responses of the flexible robotic manipulator. This impact vibration exhibits characteristics of remarkable nonlinearity and strong energy. The main goal of this study is to put forward an energy-based control method to absorb and attenuate large amplitude impact vibration of the flexible robotic manipulator. The method takes advantage of internal resonance and is implemented through a vibration absorber based on the transfer and dissipation of energy. The addition of the vibration absorber to the flexible arm generates a coupling effect between vibration modes of the system. By means of analysis on 2:1 internal resonance, the exchange of energy is proven to be existent. The impact vibrational energy can be transferred from the arm to the absorber and dissipated through the damping of the absorber. The results of numerical simulations are promising and preliminarily verify that the method is feasible and can be used to combat large amplitude impact vibration of the flexible manipulator undergoing rigid motion.

  10. Hydrogen Bonding in Ionic Liquids Probed by Linear and Nonlinear Vibrational Spectroscopy

    CERN Document Server

    Roth, C; Kerlé, D; Friedriszik, F; Lütgens, M; Lochbrunner, S; Kühn, O; Ludwig, R

    2012-01-01

    Three imidazolium-based ionic liquids of the type [Cnmim][NTf2] with varying alkyl chain lengths (n = 1, 2 and 8) at the 1 position of the imidazolium ring were studied applying IR, linear Raman, and multiplex CARS spectroscopy. The focus has been on the CH-stretching region of the imidazolium ring, which is supposed to carry information about a possible hydrogen bonding network in the ionic liquid. The measurements are compared to calculations of the corresponding anharmonic vibrational spectra for a cluster of [C2mim][NTf2] consisting of four ion pairs. The results support the hypothesis of moderate hydrogen bonding involving the C(4)-H and C(5)-H groups and somewhat stronger hydrogen bonds of the C(2)-H groups.

  11. Research on modeling of nonlinear vibration isolation system based on BouceWen model

    Institute of Scientific and Technical Information of China (English)

    Zhi-ling PENG; Chun-gui ZHOU

    2014-01-01

    A feedforword neural network of multi-layer topologies for systems with hysteretic nonlinearity is constructed based on BouceWen dif-ferential model. It not only reflects the hysteresis force characteristics of the BouceWen model, but also determines its corresponding pa-rameters. The simulation results show that restoring forceedisplacement curve hysteresis loop is very close to the real curve. The model trained can accurately predict the time response of system. The model is checked under the noise level. The result shows that the model has higher modeling precision, good generalization capability and a certain anti-interference ability.

  12. Using strong nonlinearity and high-frequency vibrations to control effective mechanical stiffness

    DEFF Research Database (Denmark)

    Thomsen, Jon Juel

    2008-01-01

    High-frequency excitation (HFE) can be used to change the effective stiffness of an elastic structure, and related quanti-ties such as resonance frequencies, wave speed, buckling loads, and equilibrium states. There are basically two ways to do this: By using parametrical HFE (with or without non...... the method of direct separation of motions with results of a modified multiple scales ap-proach, valid also for strong nonlinearity, the stiffening ef-fect is predicted for a generic 1-dof system, and results are tested against numerical simulation and ((it is planned)) laboratory experiments....

  13. Non-Linear Vibrations, Stability, and Dynamics of Structures and Mechanisms

    Science.gov (United States)

    1989-08-01

    particle of matter can occupy only one position in space. On the basis of this law, it is not difficult to show that a rigid body can assume only one...Em+n) is desired, with m > 0, then all terms of O(em +n) must be retained in the expanded equations. With this in mind , we address some other...concerning the 3 nonlinear non-planar response of inextensional beams and of beam-like structures. These include modal interactins both in the

  14. Faster Simulation Methods for the Non-Stationary Random Vibrations of Non-Linear MDOF Systems

    DEFF Research Database (Denmark)

    Askar, A.; Köylüoglu, H. U.; Nielsen, Søren R. K.;

    In this paper semi-analytical forward-difference Monte Carlo simulation procedures are proposed for the determination of the lower order statistics and the Joint Probability Density Function (JPDF) of the stochastic response of geometrically nonlinear multi-degree-of-freedom structural systems....... Such a treatment offers higher rates of convergence, faster speed and higher accuracy. These procedures are compared to the direct Monte Carlo simulation procedure, which uses a fourth order Runge-Kutta scheme with the white noise process approximated by a broad band Ruiz-Penzien broken line process...

  15. Using strong nonlinearity and high-frequency vibrations to control effective mechanical stiffness

    DEFF Research Database (Denmark)

    Thomsen, Jon Juel

    2008-01-01

    High-frequency excitation (HFE) can be used to change the effective stiffness of an elastic structure, and related quanti-ties such as resonance frequencies, wave speed, buckling loads, and equilibrium states. There are basically two ways to do this: By using parametrical HFE (with or without non...... the method of direct separation of motions with results of a modified multiple scales ap-proach, valid also for strong nonlinearity, the stiffening ef-fect is predicted for a generic 1-dof system, and results are tested against numerical simulation and ((it is planned)) laboratory experiments....

  16. Bifurcation of piecewise-linear nonlinear vibration system of vehicle suspension

    Institute of Scientific and Technical Information of China (English)

    Shun ZHONG; Yu-shu CHEN

    2009-01-01

    A kinetic model of the piecewise-linear nonlinear suspension system that consists of a dominant spring and an assistant spring is established.Bifurcation of the resonance solution to a suspension system with two degrees of freedom is investigated with the singularity theory.Transition sets of the system and 40 groups of bifurcation diagrams are obtained.The local bifurcation is found,and shows the overall characteristics of bifurcation.Based on the relationship between parameters and the topological bifurcation solutions,motion characteristics with different parameters are obtained.The results provides a theoretical basis for the optimal control of vehicle suspension system parameters.

  17. Linear- and nonlinear-electromyographic analysis of supracutaneous vibration stimuli of the forearm using diverse frequencies and considering skin physiological properties.

    Science.gov (United States)

    Ko, Chang-Yong; Chang, Yunhee; Kim, Sol-Bi; Kim, Shinki; Kim, Gyoosuk; Ryu, Jeicheong; Mun, Musung

    2014-01-01

    Numerous studies have reported the efficacy of vibration in sensory feedback or substitution devices for users of myoelectric hand prostheses. Although most myoelectric hand prostheses are presently manipulated by a surface electromyogram (sEMG), only a few studies have been conducted on the effect of vibration on an sEMG. This study aimed to determine whether vibration stimulation affects the linear and nonlinear properties of surface electromyography (sEMG) considering the skin properties. The vibration stimuli, with frequencies ranging from 37 to 258 Hz, were applied to the proximal part of the arms of the eight female and seven male subjects. The skinfold thickness, hardness, and vibration threshold at the stimuli loci were measured. The root mean square (rms) and fractal dimension (DF) of the sEMG were measured at a distance of 1 cm in the upward direction from the stimuli loci. Above 223 Hz there were no differences between the rms of the genders in between the vibration stimuli (p > 0.05). Moreover, no differences were observed between the DF of the genders for any frequency (p > 0.05). Above 149 Hz, there were correlations between the rms and the skin hardness in the females. Otherwise, no correlations were observed between the rms and DF and the skin properties in both genders for most of the frequencies (all p > 0.05). These results suggest that vibration stimuli affect the linear properties of the sEMG, but not the nonlinear properties.

  18. Nonlinear Forced Vibration of a Viscoelastic Buckled Beam with 2 : 1 Internal Resonance

    Directory of Open Access Journals (Sweden)

    Liu-Yang Xiong

    2014-01-01

    Full Text Available Nonlinear dynamics of a viscoelastic buckled beam subjected to primary resonance in the presence of internal resonance is investigated for the first time. For appropriate choice of system parameters, the natural frequency of the second mode is approximately twice that of the first providing the condition for 2 : 1 internal resonance. The ordinary differential equations of the two mode shapes are established using the Galerkin method. The problem is replaced by two coupled second-order differential equations with quadratic and cubic nonlinearities. The multiple scales method is applied to derive the modulation-phase equations. Steady-state solutions of the system as well as their stability are examined. The frequency-amplitude curves exhibit the steady-state response in the directly excited and indirectly excited modes due to modal interaction. The double-jump, the saturation phenomenon, and the nonperiodic region phenomena are observed illustrating the influence of internal resonance. The validity range of the analytical approximations is assessed by comparing the analytical approximate results with a numerical solution by the Runge-Kutta method. The unstable regions in the internal resonance are explored via numerical simulations.

  19. Non-Gaussian approach for parametric random vibration of non-linear structures

    Science.gov (United States)

    Ibrahim, R. A.; Soundararajan, A.

    1984-01-01

    The dynamic response of a nonlinear, single degree of freedom structural system subjected to a physically white noise parametric excitation is investigated. The Ito stochastic calculus is employed to derive a general differential equation for the moments of the response coordinates. The differential equations of moments of any order are found to be coupled with higher order moments. A non-Gaussian closure scheme is developed to truncate the moment equations up to fourth order. The statistical of the stationary response are computed numerically and compared with analytical solutions predicted by a Gaussian closure scheme and the stochastic averaging method. It is found that the computed results exhibit the jump phenomenon which is typical of the characteristics of deterministic nonlinear systems. In addition, the numerical algorithm leads to multiple solutions all of which give positive mean squares. However, two of these solutions are found to violate the properties of high order moments. One solution preserves the moments properties and demonstrates that the system achieves a stationary response.

  20. Nonlinear targeted energy transfer of two coupled cantilever beams coupled to a bistable light attachment

    Science.gov (United States)

    Mattei, P.-O.; Ponçot, R.; Pachebat, M.; Côte, R.

    2016-07-01

    In order to control the sound radiation by a structure, one aims to control vibration of radiating modes of vibration using "Energy Pumping" also named "Targeted Energy Transfer". This principle is here applied to a simplified model of a double leaf panel. This model is made of two beams coupled by a spring. One of the beams is connected to a nonlinear absorber. This nonlinear absorber is made of a 3D-printed support on which is clamped a buckled thin small beam with a small mass fixed at its centre having two equilibrium positions. The experiments showed that, once attached onto a vibrating system to be controlled, under forced excitation of the primary system, the light bistable oscillator allows a reduction of structural vibration up to 10 dB for significant amplitude and frequency range around the first two vibration modes of the system.

  1. Nonlinear dynamics and control strategies: On a energy harvester vibrating system with a linear form to non-ideal motor torquet

    Directory of Open Access Journals (Sweden)

    de Pontes B. R.

    2012-07-01

    Full Text Available In this paper, we deal with the research of a vibrating model of an energy harvester device, including the nonlinearities in the model of the piezoelectric coupling and the non-ideal excitation. We show, using numerical simulations, in the analysis of the dynamic responses, that the harvested power is influenced by non-linear vibrations of the structure. Chaotic behavior was also observed, causing of the loss of energy throughout the simulation time. Using a perturbation technique, we find an approximate analytical solution for the non-ideal system. Then, we apply both two control techniques, to keep the considered system, into a stable condition. Both the State Dependent Ricatti Equation (SDRE control as the feedback control by changing the energy of the oscillator, were efficient in controlling of the considered non-ideal system.

  2. Intramolecular charge transfer and Z-scan studies of a semiorganic nonlinear optical material sodium acid phthalate hemihydrate: a vibrational spectroscopic study.

    Science.gov (United States)

    Sajan, D; Vijayan, N; Safakath, K; Philip, Reji; Joe, I Hubert

    2011-07-28

    FT-IR and Raman spectra of the nonlinear optical material sodium acid phthalate hemihydrate crystal have been recorded and analyzed. The equilibrium geometry, bonding features, and harmonic vibrational wavenumbers have been investigated with the help of the B3LYP density functional theory method. A detailed interpretation of the vibrational spectra was carried out with the aid of normal coordinate analysis following the scaled quantum mechanical force field methodology. The natural bond orbital analysis confirms the occurrence of strong intermolecular hydrogen bonding in the molecule. Nonlinear optical absorption of the sample has been studied at 532 nm using single 5 ns laser pulses, employing the open-aperture Z-scan technique. It is found that the NaAPH molecule is a potential candidate for optical limiting applications. © 2011 American Chemical Society

  3. 非线性部件的轴系动稳态响应研究%RESEARCH ON STEADY VIBRATION RESPONSE OF SHAFTING WITH NONLINEAR COUPLING

    Institute of Scientific and Technical Information of China (English)

    龚宪生; 谢志江; 唐一科

    2001-01-01

    对有局部非线性的船舶推进轴系振动稳态响应进行理论和试验研究。在考虑联轴器非线性刚度和阻尼的情况下,以GLM(Galerkin-Levenberg-Marquardt)法为基础,提出一种分离变换法并编制相应计算程序。用此方法及程序对一单圆盘轴系振动稳态响应进行计算并进行试验。结果表明,计算所获振动稳态响应时间历程与试验所获振动稳态响应时间历程吻合好。%Theoretical and experimental research on steady vibration response of shipping propulsion shafting with local nonlinear characteristics are done. Owing to the coupling with the nonlinear characteristics, it is difficult that steady vibration response of the shafting is got fen by regular solutions. On the basis of GLM(Galerkin-Levenberg-Marquardt) method, a new method that is called the separating and transform algorithm is proposed and programmed. It can be used for calculating steady vibration response of the shafting with the coupling. Steady vibration response of a single disk rotor is calculated using the program and is tested. The results show that the method and the program are useful for calculating steady vibration response of the shafting with local nonlinear dynamic stiffness and damping. Theoretical results obtained by calculating are coincident with experimental one.

  4. PREDICTION OF VORTEX-INDUCED VIBRATION OF LONG FLEXIBLE CYLINDERS MODELED BY A COUPLED NONLINEAR OSCILLATOR:INTEGRAL TRANSFORM SOLUTION

    Institute of Scientific and Technical Information of China (English)

    GU Ji-jun; AN Chen; LEVI Carlos; SU Jian

    2012-01-01

    The Generalized Integral Transform Technique (GITT) was applied to predict dynamic response of Vortex-Induced Vibration (VIV) of a long flexible cylinder.A nonlinear wake oscillator model was used to represent the cross-flow force acting on the cylinder,leading to a coupled system of second-order Partial Differential Equations (PDEs) in temporal variable.The GITT approach was used to transform the system of PDEs to a system of Ordinary Differential Equations (ODEs),which was numerically solved by using the Adams-Moulton and Gear method (DIVPAG) developed by the International Mathematics and Statistics Library (IMSL).Numerical results were presented for comparison to those given by the finite difference method and experimental results,allowing a critical evaluation of the technique performance.The influence of variation of mean axial tension induced by elongation of flexible cylinder was evaluated,which was shown to be not negligible in numerical simulation of VIV of a long flexible cylinder.

  5. Nonlinear vibration of viscoelastic embedded-DWCNTs integrated with piezoelectric layers-conveying viscous fluid considering surface effects

    Science.gov (United States)

    Fereidoon, A.; Andalib, E.; Mirafzal, A.

    2016-07-01

    This article studies the nonlinear vibration of viscoelastic embedded nano-sandwich structures containing of a double walled carbon nanotube (DWCNT) integrated with two piezoelectric Zinc oxide (ZnO) layers. DWCNT and ZnO layers are subjected to magnetic and electric fields, respectively. This system is conveying viscous fluid and the related force is calculated by modified Navier-Stokes relation considering slip boundary condition and Knudsen number. Visco-Pasternak model with three parameters of the Winkler modulus, shear modulus, and damp coefficient is used for simulation of viscoelastic medium. The nano-structure is simulated as an orthotropic Timoshenko beam (TB) and the effects of small scale, structural damping and surface stress are considered based on Eringen's, Kelvin-voigt and Gurtin-Murdoch theories. Energy method and Hamilton's principle are employed to derive motion equations which are then solved using differential quadrature method (DQM). The detailed parametric study is conducted, focusing on the combined effects of small scale effect, fluid velocity, thickness of piezoelectric layer, boundary condition, surface effects, van der Waals (vdW) force on the frequency and critical velocity of nano-structure. Results indicate that the frequency and critical velocity increases with assume of surface effects.

  6. PARAMETRIC MATCHING SELECTION OF MULTI-MEDIUM COUPLING SHOCK ABSORBER

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    To achieve the dual demand of resisting violent impact and attenuating vibration in vibration-impact-safety of protection for precision equipment such as MEMS packaging system, a theoretical mathematical model of multi-medium coupling shock absorber is presented. The coupling of quadratic damping, linear damping, Coulomb damping and nonlinear spring are considered in the model. The approximate theoretical calculating formulae are deduced by introducing transformation-tactics. The contrasts between the analytical results and numerical integration results are developed. The resisting impact characteristics of the model are also analyzed in progress. In the meantime,the optimum model of the parameters matching selection for design of the shock absorber is built.The example design is illustrated to confirm the validity of the modeling method and the theoretical solution.

  7. Targeted energy transfer in laminar vortex-induced vibration of a sprung cylinder with a nonlinear dissipative rotator

    Science.gov (United States)

    Blanchard, Antoine; Bergman, Lawrence A.; Vakakis, Alexander F.

    2017-07-01

    We computationally investigate the dynamics of a linearly-sprung circular cylinder immersed in an incompressible flow and undergoing transverse vortex-induced vibration (VIV), to which is attached a rotational nonlinear energy sink (NES) consisting of a mass that freely rotates at constant radius about the cylinder axis, and whose motion is restrained by a rotational linear viscous damper. The inertial coupling between the rotational motion of the attached mass and the rectilinear motion of the cylinder is ;essentially nonlinear;, which, in conjunction with dissipation, allows for one-way, nearly irreversible targeted energy transfer (TET) from the oscillating cylinder to the nonlinear dissipative attachment. At the intermediate Reynolds number Re = 100, the NES-equipped sprung cylinder undergoes repetitive cycles of slowly decaying oscillations punctuated by intervals of chaotic instabilities. During the slowly decaying portion of each cycle, the dynamics of the cylinder is regular and, for large enough values of the ratio ε of the NES mass to the total mass (i.e., NES mass plus cylinder mass), can lead to significant vortex street elongation with partial stabilization of the wake. As ε approaches zero, no such vortex elongation is observed and the wake patterns appear similar to that for a sprung cylinder with no NES. We apply proper orthogonal decomposition (POD) to the velocity flow field during a slowly decaying portion of the solution and show that, in situations where vortex elongation occurs, the NES, though not in direct contact with the surrounding fluid, has a drastic effect on the underlying flow structures, imparting significant and continuous passive redistribution of energy among POD modes. We construct a POD-based reduced-order model for the lift coefficient to characterize energy transactions between the fluid and the cylinder throughout the slowly decaying cycle. We introduce a quantitative signed measure of the work done by the fluid on the

  8. Comments on the paper "A comprehensive modeling and vibration analysis of AFM microcantilevers subjected to nonlinear tip-sample interaction forces" by Sohrab Eslami and Nader Jalili.

    Science.gov (United States)

    Passian, Ali; Tetard, Laurene; Thundat, Thomas

    2013-08-01

    This comment on the paper "A comprehensive modeling and vibration analysis of AFM microcantilevers subjected to nonlinear tip-sample interaction forces" by Sohrab Eslami and Jalili (2012) [1] aims to: (1) discuss and elucidate the concept of "virtual resonance" and thus (2) avert a misinterpretation of the experimental results and findings reported in the Tetard et al. Physical Review Letters 106, 180801 (2011) [2].

  9. DSP-based control system of a mechanical adaptive tuned vibration absorber%基于DSP的机械式自调谐吸振器控制系统的研究

    Institute of Scientific and Technical Information of China (English)

    康存军; 龚兴龙; 宗路航; 彭超; 陈现敏

    2012-01-01

    In order to control a mechanical adaptive tuned vibration absorber(MATVA) automatically, a controller based on a main processor of TMS320F2812 and a driver based on L298N were designed, an algorithm of mutative step-size optimization was used to develop a LabVIEW human-machine interface. Using this control system, the absorber vibration attenuation performances were experimentally investigated on a multi-modal experimental platform. The experimental results showed that the absorber can be controlled independently and efficiently with the control system, and the control process is real-time observable.%为了实现对一种机械式自调谐吸振器的减振控制,设计了以TMS320F2812为主处理器的控制器和以L298N为核心的驱动器,结合变步长寻优控制算法开发了LabVIEW人机界面.利用这套控制系统,在多模态实验平台上进行该吸振器的减振控制实验,结果表明控制系统能够实现对吸振器的嵌入式控制,并且控制过程可实时观测.

  10. Study on electromechanical coupling nonlinear vibration of flywheel energy storage system

    Institute of Scientific and Technical Information of China (English)

    JIANG; Shuyun

    2006-01-01

    The electromechanical coupling dynamics of the flywheel energy storage system (FESS) with a hybrid permanent magnetic-dynamic spiral groove bearing has been studied. The functions of the kinetic energy, the potential energys, the magnetic field energy in air gap of the flywheel motor and the energy dissipation of the whole system were obtained, and the differential equations set with electromagnetic parameters of FESS was established by applying the extended Lagrange-Maxwell equation. The four-order implicit Runge-Kutta formula to the equations was derived, and the nonlinear algebraic equations were solved by using the Gauss-Newton method. The analytical solution of an example shows that the upper damping coefficient, the lower damping coefficient and the residual magnetic induction of the rare earth permanent magnet play an important role in electromechanical resonance of the flywheel rotor system. There is a small change for the electromechanical coupling resonance frequency with the upper damping coefficient increasing, but the resonance amplitude decreases with the upper damping coefficient increasing. With the lower damping coefficient increasing, the resonance frequency increases, and the resonance amplitude decreases. With the residual magnetic induction of the permanent magnet increasing, the resonance frequency decreases, and the resonance amplitude increases.

  11. Review of Response and Damage of Linear and Nonlinear Systems under Multiaxial Vibration

    Directory of Open Access Journals (Sweden)

    Ed Habtour

    2014-01-01

    Full Text Available A review of past and recent developments in multiaxial excitation of linear and nonlinear structures is presented. The objective is to review some of the basic approaches used in the analytical and experimental methods for kinematic and dynamic analysis of flexible mechanical systems, and to identify future directions in this research area. In addition, comparison between uniaxial and multiaxial excitations and their impact on a structure’s life-cycles is provided. The importance of understanding failure mechanisms in complex structures has led to the development of a vast range of theoretical, numerical, and experimental techniques to address complex dynamical effects. Therefore, it is imperative to identify the failure mechanisms of structures through experimental and virtual failure assessment based on correctly identified dynamic loads. For that reason, techniques for mapping the dynamic loads to fatigue were provided. Future research areas in structural dynamics due to multiaxial excitation are identified as (i effect of dynamic couplings, (ii modal interaction, (iii modal identification and experimental methods for flexible structures, and (iv computational models for large deformation in response to multiaxial excitation.

  12. State Space Formulation of Nonlinear Vibration Responses Collected from a Dynamic Rotor-Bearing System: An Extension of Bearing Diagnostics to Bearing Prognostics

    Directory of Open Access Journals (Sweden)

    Peter W. Tse

    2017-02-01

    Full Text Available Bearings are widely used in various industries to support rotating shafts. Their failures accelerate failures of other adjacent components and may cause unexpected machine breakdowns. In recent years, nonlinear vibration responses collected from a dynamic rotor-bearing system have been widely analyzed for bearing diagnostics. Numerous methods have been proposed to identify different bearing faults. However, these methods are unable to predict the future health conditions of bearings. To extend bearing diagnostics to bearing prognostics, this paper reports the design of a state space formulation of nonlinear vibration responses collected from a dynamic rotor-bearing system in order to intelligently predict bearing remaining useful life (RUL. Firstly, analyses of nonlinear vibration responses were conducted to construct a bearing health indicator (BHI so as to assess the current bearing health condition. Secondly, a state space model of the BHI was developed to mathematically track the health evolution of the BHI. Thirdly, unscented particle filtering was used to predict bearing RUL. Lastly, a new bearing acceleration life testing setup was designed to collect natural bearing degradation data, which were used to validate the effectiveness of the proposed bearing prognostic method. Results show that the prediction accuracy of the proposed bearing prognostic method is promising and the proposed bearing prognostic method is able to reflect future bearing health conditions.

  13. A semi analytical method for electro-thermo-mechanical nonlinear vibration analysis of nanobeam resting on the Winkler-Pasternak foundations with general elastic boundary conditions

    Science.gov (United States)

    Zarepour, Misagh; Amirhosein Hosseini, Seyed

    2016-08-01

    This study presents an examination of nonlinear free vibration of a nanobeam under electro-thermo-mechanical loading with elastic medium and various boundary conditions, especially the elastic boundary condition. The nanobeam is modeled as an Euler-Bernoulli beam. The von Kármán strain-displacement relationship together with Hamilton’s principle and Eringen’s theory are employed to derive equations of motion. The nonlinear free vibration frequency is obtained for simply supported (S-S) and elastic supported (E-E) boundary conditions. E-E boundary condition is a general and actual form of boundary conditions and it is chosen because of more realistic behavior. By applying the differential transform method (DTM), the nanobeam’s natural frequencies can be easily obtained for the two different boundary conditions mentioned above. Performing a precise study led to investigation of the influences of nonlocal parameter, temperature change, spring constants (either for elastic medium or boundary condition) and imposed electric potential on the nonlinear free vibration characteristics of nanobeam. The results for S-S and E-E nanobeams are compared with each other. In order to validate the results, some comparisons are presented between DTM results and open literature to show the accuracy of this new approach. It has been discovered that DTM solves the equations with minimum calculation cost.

  14. Experimental verificatio of load resistance switching for global stabilization of high-energy response of a nonlinear wideband electromagnetic vibration energy harvester

    Science.gov (United States)

    Sato, T.; Masuda, A.; Sanada, T.

    2015-12-01

    This paper presents an experimental verification of a self-excitation control of a resonance- type vibration energy harvester with a Duffing-type nonlinearity which is designed to perform effectively in a wide frequency range. For the conventional linear vibration energy harvester, the performance of the power generation at the resonance frequency and the bandwidth of the resonance peak are trade-off. The resonance frequency band can be expanded by introducing a Duffing-type nonlinear oscillator in order to enable the harvester to generate larger electric power in a wider frequency range. However, since such nonlinear oscillator can have multiple stable steady-state solutions in the resonance band, it is difficult for the nonlinear harvester to maintain the high performance of the power generation constantly. The principle of self-excitation and entrainment has been utilized to provide the global stability to the highest-energy solution by destabilizing other unexpected lower-energy solutions by introducing a switching circuit of the load resistance between positive and the negative values depending on the response amplitude of the oscillator. It has been experimentally validated that this control law imparts the self-excitation capability to the oscillator to show an entrainment into the highest-energy solution.

  15. Nonlinear analysis of wind-induced vibration of high-speed railway catenary and its influence on pantograph-catenary interaction

    Science.gov (United States)

    Song, Yang; Liu, Zhigang; Wang, Hongrui; Lu, Xiaobing; Zhang, Jing

    2016-06-01

    The wind-induced vibration of the high-speed catenary and the dynamic behaviour of the pantograph-catenary under stochastic wind field are firstly analysed. The catenary model is established based on nonlinear cable and truss elements, which can fully describe the nonlinearity of each wire and the initial configuration. The model of the aerodynamic forces acting on the messenger/contact wire is deduced by considering the effect of the vertical and horizontal fluctuating winds. The vertical and horizontal fluctuating winds are simulated by employing the Davenport and Panofsky spectrums, respectively. The aerodynamic coefficients of the contact/messenger wire are calculated through computational fluid dynamics. The wind-induced vibration response of catenary is analysed with different wind speeds and angles. Its frequency-domain characteristics are discussed using Auto Regression model. Finally, a pantograph model is introduced and the contact force of the pantograph-catenary under stochastic wind is studied. The results show that both the wind speed and the attack angle exert a significant effect on the wind-induced vibration. The existence of the groove on the contact wire cross-section leads to a significant change of the aerodynamic coefficient, which affects largely the aerodynamic forces applied on the catenary wires, as well as the vibration response. The vibration frequency with high spectral power mainly concentrates on the predominant frequency of the fluctuating wind and the natural frequency of catenary. The increase in the wind speed results in a significant deterioration of the current collection. The numerical example shows that a relatively stable current collection can be ensured when the wind flows at the relatively horizontal direction.

  16. Theory of vibration protection

    CERN Document Server

    Karnovsky, Igor A

    2016-01-01

    This text is an advancement of the theory of vibration protection of mechanical systems with lumped and distributed parameters. The book offers various concepts and methods of solving vibration protection problems, discusses the advantages and disadvantages of different methods, and the fields of their effective applications. Fundamental approaches of vibration protection, which are considered in this book, are the passive, parametric and optimal active vibration protection. The passive vibration protection is based on vibration isolation, vibration damping and dynamic absorbers. Parametric vibration protection theory is based on the Shchipanov-Luzin invariance principle. Optimal active vibration protection theory is based on the Pontryagin principle and the Krein moment method. The book also contains special topics such as suppression of vibrations at the source of their occurrence and the harmful influence of vibrations on humans. Numerous examples, which illustrate the theoretical ideas of each chapter, ar...

  17. NONLINEAR VIBRATION CHARACTERISTICS OF SHROUDED BLADE FOR CYLINDRICAL PANEL%壳板凸肩叶片的非线性振动特性

    Institute of Scientific and Technical Information of China (English)

    李红影; 谢里阳; 郭星辉

    2013-01-01

    A shrouded blade is investigated in this paper. Using Donnell's nonlinear shallow-shell theory, the nonlinear equation of vibration is obtained, in which the geometric nonlinearity, damping, shroud contact normal load and friction between shrouds are taken into account. Discretized by a Galerkin method, the nonlinear mode equations are studied by using numerical and analytical methods, then nonlinear frequency-response curves are obtained. The stability of periodic solutions of the system is also analyzed. The results show that the periodic changes in the direction of the friction force between shrouds cause the discontinuity of vibration characteristics of the system. In order to describe the inherent vibration characteristic of the system, two frequency-response curves are drawn, which respectively adopts the positive and negative directions of the friction force. With the changes of the direction of a friction force in a period of 774, the vibration of the system also jumps between these two curves with a period 774, this effectively suppress the response amplitude of a shrouded blade, and improves its safety.%以凸肩叶片为研究对象,应用Donnell's简化壳理论建立模型的非线性振动方程,考虑了几何非线性、阻尼、凸肩接触面正压力、摩擦力等因素.采用Galerkin法将振动微分方程离散到模态坐标上,分别应用数值法和近似解析法对方程组求解,得到系统的频率响应曲线,并讨论了系统周期解的稳定性.结果表明,由于凸肩接触面之间摩擦力方向周期性改变,导致系统的振动特性产生不连续性,以摩擦力为正、负方向分别绘制一条频率响应曲线.则随着摩擦力方向T/4周期变换一次,系统的振动也以T/4为周期在两条频率响应曲线上来回跳跃,从而有效抑制叶片的振动响应,提高叶片使用的安全性.

  18. Non-Linear Thermal Lens Signal of the (Δυ = 6) C-H Vibrational Overtone of Benzene in Liquid Solutions of Hexane

    Science.gov (United States)

    Nyaupane, Parashu R.; Manzanares, Carlos

    2016-06-01

    The thermal lens technique is applied to vibrational overtone spectroscopy of solutions of benzene. The pump and probe thermal lens technique has been found to be very sensitive for detecting samples of low concentration in transparent solvents. The C-H fifth vibrational (Δυ = 6) overtone spectrum of benzene is detected at room temperature for compositions per volume in the range (1 to 1× 10-4) using n-C_6H14 as the solvent. By detecting the absorption band in a 100 ppm solution, the peak absorption of the signal is approximately (2.2 ± 0.3)× 10-7 cm-1. The parameters that determine the magnitude of the thermal lens signal such as the pump laser power and the thermodynamic properties of the solvent and solute are discussed. A plot of normalized integrated intensity as a function of composition of benzene in solution reveals a non-linear behavior. The non-linearity cannot be explained assuming solvent enhancement at low concentrations. A two color absorption model that includes the simultaneous absorption of the pump and probe lasers could explain the enhanced magnitude and the non-linear behavior of the thermal lens signal for solutions of composition below 0.01.

  19. Dependence of the frequency spectrum of small amplitude vibrations superimposed on finite deformations of a nonlinear, cylindrical elastic body on residual stress

    KAUST Repository

    Gorb, Yuliya

    2010-11-01

    We model and analyze the response of nonlinear, residually stressed elastic bodies subjected to small amplitude vibrations superimposed upon large deformations. The problem derives from modeling the use of intravascular ultrasound (IVUS) imaging to interrogate atherosclerotic plaques in vivo in large arteries. The goal of this investigation is twofold: (i) introduce a modeling framework for residual stress that unlike traditional Fung type classical opening angle models may be used for a diseased artery, and (ii) investigate the sensitivity of the spectra of small amplitude high frequency time harmonic vibrations superimposed on a large deformation to the details of the residual stress stored in arteries through a numerical simulation using physiologic parameter values under both low and high blood pressure loadings. The modeling framework also points the way towards an inverse problem using IVUS techniques to estimate residual stress in healthy and diseased arteries. © 2010 Elsevier Ltd. All rights reserved.

  20. Accurate investigation of lateral vibrations of a quintic nonlinear beam on an elastic foundation: Using an exact formulation of the beam curvature

    Science.gov (United States)

    Sedighi, H. M.; Shirazi, K. H.

    2014-11-01

    This article attains a new formulation of beam vibrations on an elastic foundation with quintic nonlinearity, including exact expressions for the beam curvature. To achieve a proper design of the beam structures, it is essential to realize how the beam vibrates in its transverse mode, which, in turn, yields the natural frequency of the system. In this direction, a powerful analytical method called the parameter expansion method is employed to obtain the exact solution of the frequency-amplitude relationship. It is clearly shown that the first term in series expansions is sufficient to produce a highly accurate approximation of the above-mentioned system. Finally, the accuracy of the present analytic procedure is evaluated through comparisons with numerical calculations.

  1. Vertical and dual-axis vibration of the seated human body: Nonlinearity, cross-axis coupling, and associations between resonances in transmissibility and apparent mass

    Science.gov (United States)

    Zheng, Guangtai; Qiu, Yi; Griffin, Michael J.

    2012-12-01

    The vertical apparent mass of the human body exhibits nonlinearity, with the principal resonance frequency reducing as the vibration magnitude increases. Measures of the transmission of vibration to the spine and the pelvis have suggested complex modes are responsible for the dominant resonance during vertical excitation, but the modes present with dual-axis excitation have not been investigated. This study was designed to examine how the apparent mass and transmissibility of the human body depend on the magnitude of vertical excitation and the addition of fore-and-aft excitation, and the relation between the apparent mass and the transmissibility of the body. The movement of the body (over the first, fifth and twelfth thoracic vertebrae, the third lumbar vertebra, and the pelvis) in the fore-and-aft and vertical directions (and in pitch at the pelvis) was measured in 12 male subjects sitting with their hands on their laps during random vertical vibration excitation (over the range 0.25-20 Hz) at three vibration magnitudes (0.25, 0.5 and 1.0 m s-2 rms). At the highest magnitude of vertical excitation (1.0 m s-2 rms) the effect of adding fore-aft vibration (at 0.25, 0.5, and 1.0 m s-2 rms) was investigated. The forces in the vertical and fore-and-aft directions on the seat surface were also measured so as to calculate apparent masses. Resonances in the apparent mass and transmissibility to the spine and pelvis in the fore-and-aft and vertical directions, and pitch transmissibility to the pelvis, shifted to lower frequencies as the magnitude of vertical excitation increased and as the magnitude of the additional fore-and-aft excitation increased. The nonlinear resonant behaviour of the apparent mass and transmissibility during dual-axis vibration excitation suggests coupling between the principal mode associated with vertical excitation and the cross-axis influence of fore-and-aft excitation. The transmissibility measures are consistent with complex modes

  2. BIFURCATION SOLUTION FOR FREE VIBRATION OF CIRCULAR PLATE WITH STRONG QUADRATIC NONLINEARITY%二次非线性圆板自由振动分岔解

    Institute of Scientific and Technical Information of China (English)

    李银山; 刘波; 张明路; 段国林

    2011-01-01

    计及材料的非线性弹性,建立圆板自由振动的非线性动力学方程.采用Galerkin法,将圆板的非线性动力学偏微分方程简化成四种标准类型的二次非线性微分方程.提出一类强非线性动力系统的初值变换法,将描述动力系统的二阶常微分方程,化为以角频率、振幅和偏心距为独立变量的不完备非线性代数方程组,考虑初始条件补充约束方程,构成频率、振幅和偏心距为变量的完备非线性代数方程组.利用Maple程序可以方便地求解.结果表明,初值变换法不仅适合于对称振动问题,而且适合于非对称振动问题.首次给出二次非线性自由振动的偏一频曲线.%The nonlinear dynamic equation of free vibration of a circular plate is derived with nonlinear theory of elasticity. By using Calerkin' g method, the governing partial differential equation was reduced to four standard types of quadratic nonlinear ordinary ones. A method of initial-value transformation is presented for a class strongly nonlinear dynamic system. By using Ritz-Galerkin s method , an oscillation system governed by a set of second order ordinary differential equations, can be transformed into a set of incomplete non-linear algebraic equations with angular frequencies, amplitudes and central offsets as independent variables. Then, by supplement of some initial-value restrictions, the incomplete equations can be made complete, obtaining a set of non-linear algebraic equations with angular frequencies, amplitudes and central offsets, which can be solved conveniently by Maple program. Hie results show that the method of initial-value transformation can solve not only symmetry problems, but also asymmetry problems for free vibration. The offset-angular frequency backbone curves of quadratic nonlinear equations were presented for the first time.

  3. 一类具有吸收边界条件的二阶非线性双曲方程的混合元法分析%ANALYSIS OF MIXED FINITE ELEMENT METHOD FOR A KIND OF SECOND-ORDER NONLINEAR HYPERBOLIC EQUATIONS WITH ABSORBING BOUNDARY CONDITIONS

    Institute of Scientific and Technical Information of China (English)

    杜宁

    2001-01-01

    Mixed finite element method is used to treat a kind of second-order nonlinear hyperbolic equations with absorbing boundary conditions. explicit-intime procedures are formulated and analyzed. Optimal L2-in-space error estimates are derived.

  4. Using high-frequency vibrations and non-linear inclusions to create metamaterials with adjustable effective properties

    DEFF Research Database (Denmark)

    Lazarov, Boyan Stefanov; Thomsen, Jon Juel

    2009-01-01

    We investigate how high-frequency (HF) excitation combined with strongly non-linear elasticity may influence the effective properties for low-frequency wave propagation. The HF effects are demonstrated for linear spring-mass chains with embedded non-linear parts. The investigated mechanical syste...

  5. Control Performance Simulation Research on Heave Compensation System Based on Dynamic Vibration Absorber%动力吸振式升沉补偿系统控制性能仿真研究

    Institute of Scientific and Technical Information of China (English)

    刘少军; 曾凤艳; 李流军

    2011-01-01

    A heave compensation system compositely acted by dynamic vibration absorber combined with the accumulator is proposed according to the requirements of 6 000 m deep sea poly -metallic mining system.The composition and principle of the heave compensation system is described, and a corresponding mathematics model of this system is built.The main parameters of the main system are selected.The mass of dynamic vibration absorbe, spring stiffness and damping coefficient are simulated and calculated by Matlab.The simulation study of the heave compensation system is conducted.The results show that the satisfactory control effectiveness can be obtained on the whole condition of sea state 4.%针对6 000 m中国大洋多金属结核采矿系统,提出了一种动力吸振器与蓄能器复合作用的升沉补偿系统.分析说明了系统的组成及工作原理,建立了系统的数学模型;应用Matlab编程计算得到了动力吸振系统中吸振器的质量、弹簧刚度和阻尼系数;对系统进行了控制效果仿真研究.研究结果表明,在整个四级海况下,动力吸振器与蓄能器复合作用的升沉补偿系统能得到很好的补偿效果.

  6. Optimal Design of Spring Characteristics of Damper for Subharmonic Vibration in Automatic Transmission Powertrain

    Science.gov (United States)

    Nakae, T.; Ryu, T.; Matsuzaki, K.; Rosbi, S.; Sueoka, A.; Takikawa, Y.; Ooi, Y.

    2016-09-01

    In the torque converter, the damper of the lock-up clutch is used to effectively absorb the torsional vibration. The damper is designed using a piecewise-linear spring with three stiffness stages. However, a nonlinear vibration, referred to as a subharmonic vibration of order 1/2, occurred around the switching point in the piecewise-linear restoring torque characteristics because of the nonlinearity. In the present study, we analyze vibration reduction for subharmonic vibration. The model used herein includes the torque converter, the gear train, and the differential gear. The damper is modeled by a nonlinear rotational spring of the piecewise-linear spring. We focus on the optimum design of the spring characteristics of the damper in order to suppress the subharmonic vibration. A piecewise-linear spring with five stiffness stages is proposed, and the effect of the distance between switching points on the subharmonic vibration is investigated. The results of our analysis indicate that the subharmonic vibration can be suppressed by designing a damper with five stiffness stages to have a small spring constant ratio between the neighboring springs. The distances between switching points must be designed to be large enough that the amplitude of the main frequency component of the systems does not reach the neighboring switching point.

  7. 多自由度非线性振动的迭代配点法研究%Barycentric interpolation iterative collocation method for nonlinear vibration of multi-degree-of-freedom systems

    Institute of Scientific and Technical Information of China (English)

    姜剑; 王兆清; 庄美玲

    2015-01-01

    The nonlinear vibration of multi-degree-of-freedom systems can be modeled by initial value problem of nonlinear differential equation,this paper mainly studied the application of barycentric rational interpolation iterative collocation method to solve nonlinear vibration of multi-degree-of-freedom systems. A linear iterative scheme is constructed for approximating nonlinear differential equations. The linear differential equations are discretized into algebraic equations by applying Barycentric rational interpolation differential matrixes. Then, the numerical results of nonlinear vibration problem can be obtained by solving the algebraic equations with iteration method. The examples of nonlinear vibration of coupled systems demonstrated the proposed method is simple, effective and excellent stability and can accurately simulate various physical quantities of the nonlinear vibration.%多自由度非线性振动的数学模型为非线性微分方程组的初值问题。文章运用重心有理插值迭代配点法研究了求解多自由度非线性振动的问题;通过构造一个逼近非线性微分方程组的线性化迭代格式,采用重心有理插值微分矩阵离散线性化微分方程组,由线性化迭代计算最终得到非线性方程组的数值解。结果表明:依据算例的解析解和数值解比较,重心有理插值迭代配点法能够高精度计算模拟多自由度非线性振动的各项物理量,并且简单有效,具有优异的计算稳定性。

  8. A nonlinear component mode synthesis method for the computation of steady-state vibrations in non-conservative systems

    Science.gov (United States)

    Joannin, Colas; Chouvion, Benjamin; Thouverez, Fabrice; Ousty, Jean-Philippe; Mbaye, Moustapha

    2017-01-01

    This paper presents an extension to classic component mode synthesis methods to compute the steady-state forced response of nonlinear and dissipative structures. The procedure makes use of the nonlinear complex modes of each substructure, computed by means of a modified harmonic balance method, in order to build a reduced-order model easily solved by standard iterative solvers. The proposed method is applied to a mistuned cyclic structure subjected to dry friction forces, and proves particularly suitable for the study of such systems with high modal density and non-conservative nonlinearities.

  9. 轧机辊系滞后非线性垂直振动系统的振动特性%Vibration Characteristics of Hysteretic Nonlinear Vertical Vibration System of Rolling Mill Roller

    Institute of Scientific and Technical Information of China (English)

    刘浩然; 侯东晓; 时培明; 刘飞

    2011-01-01

    考虑轧件弹塑性变形的滞后非线性作用,建立一种轧机辊系滞后非线性垂直振动动力学模型.运用奇点稳定性理论分析该滞后非线性系统的稳定性,得到了系统出现各种不同奇点的条件.同时采用渐进法求解系统在主共振情况下的解析近似解,得到了系统的主共振幅频特性方程.最后以实际轧机参数为例,分析轧件的非线性刚度、阻尼等参数对轧机主共振幅频响应的影响,并研究轧机在不同外部扰动下的分岔行为,发现在不同的外部扰动下,轧机表现出周期、倍周期以及混沌等多种动力学行为,这为研究和抑制轧机振动问题提供了理论参考.%A kind of hysteretic nonlinear vertical vibration dynamic model is established which considers hysteresis of strip's plastic deformation. The stability of the hysteretic nonlinear system is analyzed by using stability theory of singularity, and the conditions for the emergence of various singular points are obtained. Then the analytical approximate solution of the system under periodic excitation is accounted, and the primary resonance amplitude-frequency equation of the system is obtained. Finally, according to the actual parameters of rolling mill, the influence of nonlinear stiffness and nonlinear damp of rolled piece on the primary resonance amplitude-frequency response of rolling mill is analyzed, and the bifurcation behaviors of rolling mill under different external disturbances are studied. It is found that the rolling mill exhibits many dynamic behaviors such as periodic, period-doubling motion and chaos. The results provide theoretical reference for researching and suppressing rolling mill vibration.

  10. Non-linear vibrations of cracked structures: application to turbine rotors; Vibrations non-lineaires des structures fissurees: application aux rotors de turbines

    Energy Technology Data Exchange (ETDEWEB)

    El Arem, S.

    2006-01-15

    The aim of this work is to study the dynamic response of a cracked rotor to establish some possibilities for early on line crack detection. First, a review on experimental, numerical and analytical works on the dynamics of cracked rotors is given. Then, an original method of calculating the behavior of a cracked beam section in bending with shearing effects is presented. The nonlinear behavior relations are derived from a three-dimensional model taking into account the unilateral contact conditions on the crack's lips. Based on an energy formulation, this method could be applied to any geometry of crack. The exploration by different numerical integration methods of the vibratory response of some models of cracked rotors is presented in the third chapter of this thesis. The un-cracked parts of a rotor are represented by elements of bar or beam type, and the cracked section by a nonlinear spring taking into account the breathing mechanism of the cracks. At the end of this part, an original method of construction of a finite element of a cracked beam is presented. The final chapter is devoted to the analytical study of the system with 2 degrees of freedom. The breathing mechanism of the crack is taken into account by considering specific periodic variation of the global stiffness of the system. The differential equations system is solved using the harmonic balance method. The linear stability of the periodic solutions is studied by the Floquet theory. Some vibratory parameters are proposed as crack indicators. (author)

  11. 基于动力吸振理论的车辆ISD悬架设计与性能分析%Design and Performances Analysis of Vehicle ISD Suspension Based on Dynamic Vibration Absorber Theory

    Institute of Scientific and Technical Information of China (English)

    杨晓峰; 沈钰杰; 陈龙; 汪若尘; 孙晓强

    2014-01-01

    ISD( inerter-spring-damper)悬架是由惯容器、弹簧和阻尼器构成的一种新型车辆被动悬架。本文中基于动力吸振器在振动控制中的作用,利用惯容器动力学特性,建立了ISD悬架的单轮模型,设计出含有动力吸振器结构的ISD悬架,并对其进行仿真,用多目标遗传算法确定元件参数,分析ISD悬架的主频率特性和各性能指标(车身加速度、悬架动行程和轮胎动载荷)的振动传递特性。仿真结果表明,在0~15Hz低频段,与等刚度的传统被动悬架相比,ISD悬架改善了各性能指标的振动传递幅频特性,降低了各性能指标在共振频率1Hz附近的功率谱密度峰值。%Inerter-spring-damper( ISD) suspension is a new type of vehicle passive suspension, consisting of inerter, spring and damper. In this paper, based on the role of dynamic vibration absorber( DVA) in vibration con-trol, and by utilizing the dynamic characteristics of inerter, a single wheel model for ISD suspension is built and an ISD suspension incorporating the structure of DVA is designed. Then a simulation on ISD suspension is conducted, in which the parameters of its components are determined with multi-objective genetic algorithm, and its main fre-quency characteristics and the vibration transmission characteristics for all three performance indicators( vehicle body acceleration, suspension dynamic travel and dynamic tire load) are analyzed. Simulation results show that compared with traditional passive suspension with same stiffness, the amplitude-frequency characteristics of vibration transmis-sion for all suspension performance indicators are improved at low frequency range of 0 ~15Hz, and the peaks of power spectral density for all performance indicators are reduced effectively at resonance frequency near 1Hz.

  12. Calculations of Nonlinear Wave-Packet Interferometry Signals in the Pump-Probe Limit as Tests for Vibrational Control over Electronic Excitation Transfer

    CERN Document Server

    Biggs, Jason D

    2009-01-01

    The preceding paper describes a strategy for externally influencing the course of short-time electronic excitation transfer (EET) in molecular dimers and observing the process by nonlinear wave-packet interferometry (nl-WPI). Within a sample of isotropically oriented dimers having a specified internal geometry, a vibrational mode internal to the acceptor chromophore can be preferentially driven by electronically nonresonant impulsive stimulated Raman (or resonant infrared) excitation with a short polarized control pulse. A subsequent electronically resonant polarized pump then preferentially excites the donor, and EET ensues. Here we test both the control strategy and its spectroscopic investigation-with some sacrifice of amplitude-level detail-by calculating the pump-probe difference signal. That signal is the limiting case of the control-influenced nl-WPI signal in which the two pulses in the pump pulse-pair coincide, as do the two pulses in the probe pulse-pair. We present calculated pump-probe difference ...

  13. Theoretical investigation on the non-linear optical properties, vibrational spectroscopy and frontier molecular orbital of (E)-2-cyano-3-(3-hydroxyphenyl)acrylamide molecule

    Science.gov (United States)

    Xiao-Hong, Li; Hong-Ling, Cui; Rui-Zhou, Zhang; Xian-Zhou, Zhang

    2015-02-01

    The vibrational frequencies of (E)-2-cyano-3-(3-hydroxyphenyl)acrylamide (HB-CA) in the ground state have been calculated using density functional method (B3LYP) with B3LYP/6-311++G(d,p) basis set. The analysis of natural bond orbital was also performed. The IR spectra were obtained and interpreted by means of potential energies distributions (PEDs) using MOLVIB program. In addition, the results show that there exists Csbnd H⋯O hydrogen bond in the title compound, which is confirmed by the natural bond orbital analysis. The predicted NLO properties show that the title compound is a good candidate as nonlinear optical material. The analysis of frontier molecular orbitals shows that HB-CA has high excitation energies, good stability and high chemical hardness. The analysis of MEP map shows the negative and the positive potential sites.

  14. Theoretical investigation on the non-linear optical properties, vibrational spectroscopy and frontier molecular orbital of (E)-2-cyano-3-(3-hydroxyphenyl)acrylamide molecule.

    Science.gov (United States)

    Xiao-Hong, Li; Hong-Ling, Cui; Rui-Zhou, Zhang; Xian-Zhou, Zhang

    2015-02-25

    The vibrational frequencies of (E)-2-cyano-3-(3-hydroxyphenyl)acrylamide (HB-CA) in the ground state have been calculated using density functional method (B3LYP) with B3LYP/6-311++G(d,p) basis set. The analysis of natural bond orbital was also performed. The IR spectra were obtained and interpreted by means of potential energies distributions (PEDs) using MOLVIB program. In addition, the results show that there exists C-H⋯O hydrogen bond in the title compound, which is confirmed by the natural bond orbital analysis. The predicted NLO properties show that the title compound is a good candidate as nonlinear optical material. The analysis of frontier molecular orbitals shows that HB-CA has high excitation energies, good stability and high chemical hardness. The analysis of MEP map shows the negative and the positive potential sites.

  15. Theoretical Analysis and Numerical Simulation of Resonances and Stability of a Piecewise Linear-Nonlinear Vibration Isolation System

    Directory of Open Access Journals (Sweden)

    X. Gao

    2014-01-01

    Full Text Available A methodology is presented to study the resonance and stability for a single-degree-of-freedom (SDOF system with a piecewise linear-nonlinear stiffness term (i.e., one piece is linear and the other is weakly nonlinear. Firstly, the exact response of the linear governing equation is obtained, and a modified perturbation method is applied to finding the approximate solution of the weakly nonlinear equation. Then, the primary and 1/2 subharmonic resonances are obtained by imposing continuity conditions and periodicity conditions. Furthermore, Jacobian matrix is derived to investigate the stability of resonance responses. Finally, the results of theoretical study are compared with numerical results, and a good agreement is observed.

  16. Transient Vibration Prediction for Rotors on Ball Bearings Using Load-dependent Non-linear Bearing Stiffness

    Science.gov (United States)

    Fleming, David P.; Poplawski, J. V.

    2002-01-01

    Rolling-element bearing forces vary nonlinearly with bearing deflection. Thus an accurate rotordynamic transient analysis requires bearing forces to be determined at each step of the transient solution. Analyses have been carried out to show the effect of accurate bearing transient forces (accounting for non-linear speed and load dependent bearing stiffness) as compared to conventional use of average rolling-element bearing stiffness. Bearing forces were calculated by COBRA-AHS (Computer Optimized Ball and Roller Bearing Analysis - Advanced High Speed) and supplied to the rotordynamics code ARDS (Analysis of Rotor Dynamic Systems) for accurate simulation of rotor transient behavior. COBRA-AHS is a fast-running 5 degree-of-freedom computer code able to calculate high speed rolling-element bearing load-displacement data for radial and angular contact ball bearings and also for cylindrical and tapered roller beatings. Results show that use of nonlinear bearing characteristics is essential for accurate prediction of rotordynamic behavior.

  17. The effect of non-local higher order stress to predict the nonlinear vibration behavior of carbon nanotube conveying viscous nanoflow

    Science.gov (United States)

    Mohammadimehr, M.; Mohammadi-Dehabadi, A. A.; Maraghi, Z. Khoddami

    2017-04-01

    In this research, the effect of non-local higher order stress on the nonlinear vibration behavior of carbon nanotube conveying viscous nanoflow resting on elastic foundation is investigated. Physical intuition reveals that increasing nanoscale stress leads to decrease the stiffness of nanostructure which firstly established by Eringen's non-local elasticity theory (previous nonlocal method) while many of papers have concluded otherwise at microscale based on modified couple stress, modified strain gradient theories and surface stress effect. The non-local higher order stress model (new nonlocal method) is used in this article that has been studied by few researchers in other fields and the results from the present study show that the trend of the new nonlocal method and size dependent effect including modified couple stress theory is the same. In this regard, the nonlinear motion equations are derived using a variational principal approach considering essential higher-order non-local terms. The surrounded elastic medium is modeled by Pasternak foundation to increase the stability of system where the fluid flow may cause system instability. Effects of various parameters such as non-local parameter, elastic foundation coefficient, and fluid flow velocity on the stability and dimensionless natural frequency of nanotube are investigated. The results of this research show that the small scale parameter based on higher order stress help to increase the natural frequency which has been approved by other small scale theories such as strain gradient theory, modified couple stress theory and experiments, and vice versa for previous nonlocal method. This study may be useful to measure accurately the vibration characteristics of nanotubes conveying viscous nanoflow and to design nanofluidic devices for detecting blood Glucose.

  18. The effect of non-local higher order stress to predict the nonlinear vibration behavior of carbon nanotube conveying viscous nanoflow

    Energy Technology Data Exchange (ETDEWEB)

    Mohammadimehr, M., E-mail: mmohammadimehr@kashanu.ac.ir [Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan, P.O. Box: 87317-53153, Kashan (Iran, Islamic Republic of); Mohammadi-Dehabadi, A.A. [Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan, P.O. Box: 87317-53153, Kashan (Iran, Islamic Republic of); Department of Mechanical Engineering, Iran University of Science and Technology, Narmak, Tehran (Iran, Islamic Republic of); Maraghi, Z. Khoddami [Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan, P.O. Box: 87317-53153, Kashan (Iran, Islamic Republic of)

    2017-04-01

    In this research, the effect of non-local higher order stress on the nonlinear vibration behavior of carbon nanotube conveying viscous nanoflow resting on elastic foundation is investigated. Physical intuition reveals that increasing nanoscale stress leads to decrease the stiffness of nanostructure which firstly established by Eringen's non-local elasticity theory (previous nonlocal method) while many of papers have concluded otherwise at microscale based on modified couple stress, modified strain gradient theories and surface stress effect. The non-local higher order stress model (new nonlocal method) is used in this article that has been studied by few researchers in other fields and the results from the present study show that the trend of the new nonlocal method and size dependent effect including modified couple stress theory is the same. In this regard, the nonlinear motion equations are derived using a variational principal approach considering essential higher-order non-local terms. The surrounded elastic medium is modeled by Pasternak foundation to increase the stability of system where the fluid flow may cause system instability. Effects of various parameters such as non-local parameter, elastic foundation coefficient, and fluid flow velocity on the stability and dimensionless natural frequency of nanotube are investigated. The results of this research show that the small scale parameter based on higher order stress help to increase the natural frequency which has been approved by other small scale theories such as strain gradient theory, modified couple stress theory and experiments, and vice versa for previous nonlocal method. This study may be useful to measure accurately the vibration characteristics of nanotubes conveying viscous nanoflow and to design nanofluidic devices for detecting blood Glucose.

  19. Thermal effects on nonlinear vibration of a carbon nanotube-based mass sensor using finite element analysis

    Science.gov (United States)

    Kang, Dong-Keun; Kim, Chang-Wan; Yang, Hyun-Ik

    2017-01-01

    In the present study we carried out a dynamic analysis of a CNT-based mass sensor by using a finite element method (FEM)-based nonlinear analysis model of the CNT resonator to elucidate the combined effects of thermal effects and nonlinear oscillation behavior upon the overall mass detection sensitivity. Mass sensors using carbon nanotube (CNT) resonators provide very high sensing performance. Because CNT-based resonators can have high aspect ratios, they can easily exhibit nonlinear oscillation behavior due to large displacements. Also, CNT-based devices may experience high temperatures during their manufacture and operation. These geometrical nonlinearities and temperature changes affect the sensing performance of CNT-based mass sensors. However, it is very hard to find previous literature addressing the detection sensitivity of CNT-based mass sensors including considerations of both these nonlinear behaviors and thermal effects. We modeled the nonlinear equation of motion by using the von Karman nonlinear strain-displacement relation, taking into account the additional axial force associated with the thermal effect. The FEM was employed to solve the nonlinear equation of motion because it can effortlessly handle the more complex geometries and boundary conditions. A doubly clamped CNT resonator actuated by distributed electrostatic force was the configuration subjected to the numerical experiments. Thermal effects upon the fundamental resonance behavior and the shift of resonance frequency due to attached mass, i.e., the mass detection sensitivity, were examined in environments of both high and low (or room) temperature. The fundamental resonance frequency increased with decreasing temperature in the high temperature environment, and increased with increasing temperature in the low temperature environment. The magnitude of the shift in resonance frequency caused by an attached mass represents the sensing performance of a mass sensor, i.e., its mass detection

  20. Vibrational dynamics of the CN stretching mode of [Ru(CN)6]4- in D2O studied by nonlinear infrared spectroscopy

    Institute of Scientific and Technical Information of China (English)

    Jumpei; TAYAMA; Motohiro; BANNO; Kaoru; OHTA; Keisuke; TOMINAGA

    2010-01-01

    We have studied vibrational dynamics of the T1u mode of the CN stretching mode of [Ru(CN)6 ]4- in D2O by infrared(IR) nonlinear spectroscopy such as an IR three-pulse photon echo experiment and polarization-sensitive IR pump-probe spectroscopy. The isotropic component of the pump-probe signal shows a bi-exponential decay with time constants of 0.8 ps and 20.8 ps. The fast and slow components correspond to the rapid equilibration between the T1u mode and the Raman active modes of the CN stretching mode and the vibrational population relaxation from the v=1 state of the T1u mode,respectively. Anisotropy of the pump-probe signal decays with a time constant of 3.1 ps,which is due to the time evolution of the superposition states of the triply degenerate T1u modes. Three pulse photon echo measurements showed that the time correlation function of the frequency fluctuation decays bi-exponentially with time constants of 80 fs and 1.4 ps. These time constants depend only on the solute and are independent of the solvent,whereas the amplitudes depend on both the solute and solvent.

  1. Synthesis, vibrational spectral and nonlinear optical studies of N-(4-hydroxy-phenyl)-2-hydroxybenzaldehyde-imine: A combined experimental and theoretical investigation

    Science.gov (United States)

    Wang, Yufeng; Yu, Zongxue; Sun, Yuxi; Wang, Yishi; Lu, Lude

    2011-09-01

    The study of imine-bridged organics has been the one hot spot of photo-responsive material sciences in recent years. Herein we make a study of the synthesis, characteristics and potential application of N-(4-hydroxy-phenyl)-2-hydroxy-benzaldehyde-imine (HPHBI), C 13H 11NO 2. The studied compound was synthesized in one step by the condensation reaction of salicylaldehyde and 4-aminophenol in methanol solution, and characterized by single crystal X-ray diffraction, FT-IR and FT-Raman techniques with theoretical calculations at B3LYP/6-31G(d) level. The molecule adopts trans configuration about central C dbnd6 N bond with intramolecular hydrogen bonding, and the adjacent molecules form wave-shaped structure linked by strong intermolecular hydrogen bonding mechanism along b axis. The vibrational spectra have been precisely assigned with the aid of theoretical frequencies. Furthermore, the thermodynamic properties have been obtained by the theoretical vibrational analysis for HPHBI. The total linear polarizability and first-order hyperpolarizabilities calculated on the studied compound respectively present 25.378 Å 3 and 1.655 × 10 -29 cm 5/esu, which indicates the compound has relatively good nonlinear optical property.

  2. 基于MATLAB的万向联轴器非线性扭振仿真%Simulation of Nonlinear Torsional Vibration of Universal Joint Based on MATLAB

    Institute of Scientific and Technical Information of China (English)

    徐翔; 周瑞平; 汪萌生; 祁亮

    2011-01-01

    利用第一类Lagrange方程建立了万向联轴器非线性扭转振动方程,在此基础上得到该系统的仿真模型并通过特例计算和仿真验证了该模型的正确性;然后通过修改参数获得了系统固有频率随夹角增大而逐渐减小的变化关系,得到了在夹角小于20°时的情况下可忽略夹角进行扭振计算的结论,为万向联轴器在船舶推进轴系的设计和应用提供理论支持.%The nonlinear torsional vibration equations of universal joint is derived by the first kind of Lagrange's equations, and the simulation model of this system is obtained, which was proved to be correct through calculation and simulation results in a special case, then the relationship that the natural frequency decreased with the angle increasing is gotten through the modification parameter, and the conclusion that the angle can be omitted in torsional vibration calculation when it is less than 20 ° is drawn, which provide theoretical support for universal joint design and application in ship propulsion shaft.

  3. Non-linear control logics for vibrations suppression: a comparison between model-based and non-model-based techniques

    Science.gov (United States)

    Ripamonti, Francesco; Orsini, Lorenzo; Resta, Ferruccio

    2015-04-01

    Non-linear behavior is present in many mechanical system operating conditions. In these cases, a common engineering practice is to linearize the equation of motion around a particular operating point, and to design a linear controller. The main disadvantage is that the stability properties and validity of the controller are local. In order to improve the controller performance, non-linear control techniques represent a very attractive solution for many smart structures. The aim of this paper is to compare non-linear model-based and non-model-based control techniques. In particular the model-based sliding-mode-control (SMC) technique is considered because of its easy implementation and the strong robustness of the controller even under heavy model uncertainties. Among the non-model-based control techniques, the fuzzy control (FC), allowing designing the controller according to if-then rules, has been considered. It defines the controller without a system reference model, offering many advantages such as an intrinsic robustness. These techniques have been tested on the pendulum nonlinear system.

  4. Two-dimensional spectroscopy for harmonic vibrational modes with nonlinear system-bath interactions. II. Gaussian-Markovian case

    NARCIS (Netherlands)

    Tanimura, Y; Steffen, T

    2000-01-01

    The relaxation processes in a quantum system nonlinearly coupled to a harmonic Gaussian-Markovian heat bath are investigated by the quantum Fokker-Planck equation in the hierarchy form. This model describes frequency fluctuations in the quantum system with an arbitrary correlation time and thus

  5. Comments on: “Crystal growth and comparison of vibrational and thermal properties of semi-organic nonlinear optical materials”

    Indian Academy of Sciences (India)

    Srinivasan Bikshandarkoil R; Fernandes Royle

    2016-03-01

    In {\\it Pramana – J. Phys. } 75, 683 (2010), Gunasekaran et al reported that they have grown the nonlinear optical crystals, urea thiourea mercuric chloride (UTHC) and urea thiourea mercuric sulphate (UTHS).We argue that UTHC and UTHS are dubious crystals and are not what the authors propose.

  6. Two-dimensional spectroscopy for harmonic vibrational modes with nonlinear system-bath interactions. I. Gaussian-white case

    NARCIS (Netherlands)

    Steffen, T; Tanimura, Y

    2000-01-01

    The quantum Fokker-Planck equation is derived for a system nonlinearly coupled to a harmonic oscillator bath. The system-bath interaction is assumed to be linear in the bath coordinates but quadratic in the system coordinate. The relaxation induced dynamics of a harmonic system are investigated by s

  7. 悬臂梁非线性振动的压电分阶最优控制%PIEZOELECTRIC GRADE OPTIMAL CONTROL FOR THE NON-LINEAR VIBRATION OF CANTILEVER BEAM

    Institute of Scientific and Technical Information of China (English)

    刘灿昌; 李红艳

    2011-01-01

    提出非线性的分阶最优控制策略,并将其应用于悬臂梁非线性振动的压电减振控制.建立悬臂梁非线性压电减振系统动力学模型,导出减振系统的非线性动力学运动微分方程.将梁振动挠度和压电驱动器的控制电压同时展开为小参数形式,利用摄动法实现非线性压电控制微分方程的线性化.通过空间解耦,得到状态空间方程.设计非线性分阶控制器,对该减振系统进行分阶最优控制.%A non-linear grade optimal control scheme is proposed and used in the piezoelectric vibration reduction control of non-linear cantilever beam. The dynamic model of non-linear vibration reduction beam with piezoelectric damper is built. The non-linear dynamic differential equations of the vibration reduction system are derived. The vibrational deflection and the piezoelectricity driver control voltage of beam are expanded as the small parametric form. The differential equation is linearized into a set of linear equations by means of perturbation. The state space equations are obtained by decoupling in the space coordinates. The vibration reduction system is controlled by the non-linear grade controllers.

  8. Sound Absorbers

    Science.gov (United States)

    Fuchs, H. V.; Möser, M.

    Sound absorption indicates the transformation of sound energy into heat. It is, for instance, employed to design the acoustics in rooms. The noise emitted by machinery and plants shall be reduced before arriving at a workplace; auditoria such as lecture rooms or concert halls require a certain reverberation time. Such design goals are realised by installing absorbing components at the walls with well-defined absorption characteristics, which are adjusted for corresponding demands. Sound absorbers also play an important role in acoustic capsules, ducts and screens to avoid sound immission from noise intensive environments into the neighbourhood.

  9. Time-domain numerical modeling of brass instruments including nonlinear wave propagation, viscothermal losses, and lips vibration

    CERN Document Server

    Berjamin, Harold; Vergez, Christophe; Cottanceau, Emmanuel

    2015-01-01

    A time-domain numerical modeling of brass instruments is proposed. On one hand, outgoing and incoming waves in the resonator are described by the Menguy-Gilbert model, which incorporates three key issues: nonlinear wave propagation, viscothermal losses, and a variable section. The non-linear propagation is simulated by a TVD scheme well-suited to non-smooth waves. The fractional derivatives induced by the viscothermal losses are replaced by a set of local-in-time memory variables. A splitting strategy is followed to couple optimally these dedicated methods. On the other hand, the exciter is described by a one-mass model for the lips. The Newmark method is used to integrate the nonlinear ordinary differential equation so-obtained. At each time step, a coupling is performed between the pressure in the tube and the displacement of the lips. Finally, an extensive set of validation tests is successfully completed. In particular, self-sustained oscillations of the lips are simulated by taking into account the nonli...

  10. Ultrafast nonlinear optical properties of thin-solid DNA film and their application as a saturable absorber in femtosecond mode-locked fiber laser

    Science.gov (United States)

    Khazaeinezhad, Reza; Hosseinzadeh Kassani, Sahar; Paulson, Bjorn; Jeong, Hwanseong; Gwak, Jiyoon; Rotermund, Fabian; Yeom, Dong-Il; Oh, Kyunghwan

    2017-01-01

    A new extraordinary application of deoxyribonucleic acid (DNA) thin-solid-film was experimentally explored in the field of ultrafast nonlinear photonics. Optical transmission was investigated in both linear and nonlinear regimes for two types of DNA thin-solid-films made from DNA in aqueous solution and DNA-cetyltrimethylammonium chloride (CTMA) in an organic solvent. Z-scan measurements revealed a high third-order nonlinearity with n2 exceeding 10-9 at a wavelength of 1570 nm, for a nonlinarity about five orders of magnitude larger than that of silica. We also demonstrated ultrafast saturable absorption (SA) with a modulation depth of 0.43%. DNA thin solid films were successfully deposited on a side-polished optical fiber, providing an efficient evanescent wave interaction. We built an organic-inorganic hybrid all-fiber ring laser using DNA film as an ultrafast SA and using Erbium-doped fiber as an efficient optical gain medium. Stable transform-limited femtosecond soliton pulses were generated with full width half maxima of 417 fs for DNA and 323 fs for DNA-CTMA thin-solid-film SAs. The average output power was 4.20 mW for DNA and 5.46 mW for DNA-CTMA. Detailed conditions for DNA solid film preparation, dispersion control in the laser cavity and subsequent characteristics of soliton pulses are discussed, to confirm unique nonlinear optical applications of DNA thin-solid-film.

  11. 基础位移激励下碳纤维矩形索网的非线性振动%The nonlinear vibration of rectangular cable net using carbon fiber cables under foundation displacement excitation

    Institute of Scientific and Technical Information of China (English)

    谢建军; 吴晓

    2012-01-01

    研究碳纤维材料矩形单层索网在基础位移激励下的非线性振动问题,是索网抗震防震设计的基础.在考虑温度变化的基础上,建立了碳纤维矩形索网在基础位移激励下的非线性振动方程,采用Galerkin原理及KBM法求得了碳纤维材料矩形单层索网非线性振动的近似解.在把碳纤维索网与钢丝索网比较的基础上,讨论分析了温度、位移激励、振幅、阻尼等因素对矩形单层索网非线性振动的影响,得到了碳纤维索网振动特性优于钢丝索网振动特性的结论.%It was studied that the nonlinear vibration of rectangular cable net using carbon fiber cables under foundation displacement excitation,and it is the base of earthquake prevention design of cable net. Meanwhile its nonlinear vibration equation was presented on the basis of considering temperature changing. And the approximate solution of nonlinear vibration of rectangular cable mesh was given used Galerkin principle and KBM method. Then something that affects its nonlinear vibration, such as the amount of temperature changing, foundation displacement excitation, amplitude as well as damping was discussed with the comparison between steel cable and carbon fiber cable. At last the conclusions was got that the vibration characteristics of cable net using carbon fiber cables is superior to cable net using steel.

  12. 主体结构位移激励下碳纤维索桁架非线性振动%NONLINEAR VIBRATION OF CABLE TRUSS USING CARBON FIBER CABLES UNDER MAIN STRUCTURE DISPLACEMENT EXCITATION

    Institute of Scientific and Technical Information of China (English)

    刘少斌

    2011-01-01

    研究碳纤维材料索桁架在主体结构位移激励下的非线性振动问题,是空间索结构抗震防震设计的基础.在考虑温度变化的基础上,建立碳纤维索桁架在主体结构位移激励下的非线性振动方程,采用Galerkin原理及Krylov-Bogo1iulov-Mitropolsky法求得碳纤维材料索桁架非线性振动的近似解.在将碳纤维索网与钢丝索网比较的基础上,讨论分析温度、位移激励、振幅、阻尼等因素对索桁架非线性振动的影响,得到碳纤维索桁架振动特性优于钢丝索桁架振动特性的结论.%It was studied that the nonlinear vibration of cable truss using carbon fiber cables under main structure displacement excitation, and it is the base of earthquake prevention design of cable net.Meanwhile its nonlinear vibration equation was presented on the basis of considering temperature changing.And the approximate solution of nonlinear vibration of cable truss was given used Galerkin principle and Krylov-Bogoliulov-Mitropolsky method.Then something that affects its nonlinear vibration, such as the amount of temperature changing, main structure displacement excitation, amplitude as well as damping was discussed with the comparison between steel cable and carbon fiber cable.At last the conclusions was got that the vibration characteristics of cable net using carbon fiber cables is superior to cable net using steel.

  13. Optical nonlinear response function with linear and diagonal quadratic electron-vibration coupling in mixed quantum-classical systems.

    Science.gov (United States)

    Toutounji, Mohamad

    2005-03-22

    While an optical linear response function of linearly and quadratically coupled mixed quantum-classical condensed-phase systems was derived by Toutounji [J. Chem. Phys. 121, 2228 (2004)], the corresponding analytical optical line shape is derived. The respective nonlinear correlation functions are also derived. Model calculations involving photon-echo, pump-probe, and hole-burning signals of model systems with both linear and quadratic coupling are provided. Hole-burning formula of Hayes-Small is compared to that of Mukamel in mixed quantum-classical systems.

  14. Coupling between plate vibration and acoustic radiation

    Science.gov (United States)

    Frendi, Abdelkader; Maestrello, Lucio; Bayliss, Alvin

    1993-01-01

    A detailed numerical investigation of the coupling between the vibration of a flexible plate and the acoustic radiation is performed. The nonlinear Euler equations are used to describe the acoustic fluid while the nonlinear plate equation is used to describe the plate vibration. Linear, nonlinear, and quasi-periodic or chaotic vibrations and the resultant acoustic radiation are analyzed. We find that for the linear plate response, acoustic coupling is negligible. However, for the nonlinear and chaotic responses, acoustic coupling has a significant effect on the vibration level as the loading increases. The radiated pressure from a plate undergoing nonlinear or chaotic vibrations is found to propagate nonlinearly into the far field. However, the nonlinearity due to wave propagation is much weaker than that due to the plate vibrations. As the acoustic wave propagates into the far field, the relative difference in level between the fundamental and its harmonics and subharmonics decreases with distance.

  15. Crystal growth, vibrational, optical, thermal and theoretical studies of a nonlinear optical material: 2-Methyl 3,5-dinitrobenzoic acid

    Energy Technology Data Exchange (ETDEWEB)

    Sangeetha, K. [Department of Physics, Sri Sarada College for Women, Salem-16 (India); Guru Prasad, L. [Department of Science & Humanities, M. Kumarasamy College of Engineering, Karur (India); Mathammal, R. [Department of Physics, Sri Sarada College for Women, Salem-16 (India)

    2016-11-15

    Single crystals of 2-methyl 3,5-dinitro benzoic acid with reasonable size have been grown by slow evaporation solution growth method using ethanol as solvent. Quantum chemical calculation of 2-methyl 3,5-Dinitro benzoic acid was carried out by using DFT/B3LYP/6-31+G(d,p) method. The powder X-ray diffraction pattern was recorded and indexed. Both the experimental and theoretical vibrational spectrum validates the presence of functional groups. Polarizability, first order hyperpolarizability and the electric dipole moment values have been computed theoretically. The {sup 1}H and {sup 13}C NMR chemical shift of the molecule was calculated and compared with experimental results. TG/DSC analysis has been employed to understand the thermal and physio-chemical stability of the title compound. Frequency conversion property of the crystal was tested by Kurtz and Perry method. Optical absorption behavior of the grown crystal was examined by recording the optical spectrum and band gap energy was also estimated. The calculated HOMO and LUMO energy shows the charge transfer nature of the molecule.

  16. Crystal growth, vibrational, optical, thermal and theoretical studies of a nonlinear optical material: 2-Methyl 3,5-dinitrobenzoic acid

    Science.gov (United States)

    Sangeetha, K.; Guru Prasad, L.; Mathammal, R.

    2016-11-01

    Single crystals of 2-methyl 3,5-dinitro benzoic acid with reasonable size have been grown by slow evaporation solution growth method using ethanol as solvent. Quantum chemical calculation of 2-methyl 3,5-Dinitro benzoic acid was carried out by using DFT/B3LYP/6-31+G(d,p) method. The powder X-ray diffraction pattern was recorded and indexed. Both the experimental and theoretical vibrational spectrum validates the presence of functional groups. Polarizability, first order hyperpolarizability and the electric dipole moment values have been computed theoretically. The 1H and 13C NMR chemical shift of the molecule was calculated and compared with experimental results. TG/DSC analysis has been employed to understand the thermal and physio-chemical stability of the title compound. Frequency conversion property of the crystal was tested by Kurtz and Perry method. Optical absorption behavior of the grown crystal was examined by recording the optical spectrum and band gap energy was also estimated. The calculated HOMO and LUMO energy shows the charge transfer nature of the molecule.

  17. SIMULATION OF FORWARD AND BACKWARD WAVES EVOLUTION OF FEW-CYCLE PULSES PROPAGATING IN AN OPTICAL WAVEGUIDE WITH DISPERSION AND CUBIC NONLINEARITY OF ELECTRONIC AND ELECTRONIC-VIBRATION NATURE

    Directory of Open Access Journals (Sweden)

    L. S. Konev

    2015-09-01

    Full Text Available Numerical method for calculation of forward and backward waves of intense few-cycle laser pulses propagating in an optical waveguide with dispersion and cubic nonlinearity of electronic and electronic-vibration nature is described. Simulations made with the implemented algorithm show that accounting for Raman nonlinearity does not lead to qualitative changes in behavior of the backward wave. Speaking about quantitative changes, the increase of efficiency of energy transfer from the forward wave to the backward wave is observed. Presented method can be also used to simulate interaction of counterpropagating pulses.

  18. Semiconductor saturable absorbers for ultrafast THz signals

    DEFF Research Database (Denmark)

    Hoffmann, Matthias C.; Turchinovich, Dmitry

    We demonstrate saturable absorber behavior of n-type semiconductors in the THz frequency range using nonlinear THz spectroscopy. Further, we observe THz pulse shortening and increase of the group refractive index at high field strengths....

  19. Vibrations and Stability

    DEFF Research Database (Denmark)

    Thomsen, Jon Juel

    dynamical phenomena that can be encountered in engineering and scientific practice. It progresses steadily from linear vibration theory over various levels of nonlinearity to bifurcation analysis, global dynamics and chaotic vibrations. It trains the student to analyze simple models, recognize nonlinear...... phenomena and work with advanced tools such as perturbation analysis and bifurcation analysis. Explaining theory in terms of relevant examples from real systems, this book is user-friendly and meets the increasing interest in non-linear dynamics in mechanical/structural engineering and applied mathematics...

  20. Chemical synthesis, crystal structure, vibrational spectroscopy, non-linear optical properties and DFT calculation of bis (2,6-diaminopyridinium) sulfate monohydrate

    Science.gov (United States)

    Ben Hassen, Chaouki; Dammak, Thameur; Chniba-Boudjada, Nassira; Mhiri, Tahar; Boujelbene, Mohamed

    2017-01-01

    Single crystals of a new organic inorganic hybrid compound "bis (2,6-diaminopyridinium) sulfate monohydrate [C5H8N3]2SO4·H2O ([2,6-HDAP]2SO4·H2O)" was synthesized by slow evaporation method at room temperature and characterized by X-ray single crystal diffraction, infrared spectroscopy and DFT calculation. The new hybrid compound crystallizes in the orthorhombic system with the non-centro symmetric space group Pna21 and the following parameters a = 14.759(2) Å, b = 7.076 (2) Å and c = 28.159 (2) Å. The atomic arrangement can be described as inorganic chains following the b axis connected with the organic groups by means of Nsbnd H⋯O hydrogen bonds to form 3D network. Antiparallelly π-π stacked 2,6-HDAP cations form molecular columns in the spaces between the chains. The optimized molecular structure, vibrational spectra and the optical properties were calculated by the density functional theory (DFT) method using the B3LYP function with the LanL2DV basis set. The wavenumber calculated are in good agreement with the observed frequency values. The calculated hyperpolarizability βtot is about 4.5 times more than that of the reference crystal KDP. Hence, the large β value shows that the title compound is an attractive object for future studies of nonlinear optical properties.

  1. Live-cell quantification and comparison of mammalian oocyte cytosolic lipid content between species, during development, and in relation to body composition using nonlinear vibrational microscopy.

    Science.gov (United States)

    Jasensky, Joshua; Boughton, Andrew P; Khmaladze, Alexander; Ding, Jun; Zhang, Chi; Swain, Jason E; Smith, George W; Chen, Zhan; Smith, Gary D

    2016-08-01

    Cytosolic lipids participate in the growth, development, and overall health of mammalian oocytes including many roles in cellular homeostasis. Significant emphasis has been placed on the study of lipids as a dynamic organelle, which in turn requires the development of tools and techniques to quantitate and compare how lipid content relates to cellular structure, function, and normalcy. Objectives of this study were to determine if nonlinear vibrational microscopy (e.g., coherent anti-Stokes Raman scattering or CARS microscopy) could be used for live-cell imaging to quantify and compare lipid content in mammalian oocytes during development and in relation to body composition; and compare its efficacy to methods involving cellular fixation and staining protocols. Results of this study demonstrate that CARS is able to identify lipids in live mammalian oocytes, and there exists quantifiable and consistent differences in percent lipid composition across ooctyes of different species, developmental stages, and in relation to body composition. Such a method of live-cell lipid quantification has (i) experimental power in basic cell biology, (ii) practical utility for identifying developmental predictive biomarkers while advancing biology-based oocyte/embryo selection, and (iii) ability to yield rationally supporting technology for decision-making in rodents, domestic species, and human assisted reproduction and/or fertility preservation.

  2. Strong nonlinear oscillators analytical solutions

    CERN Document Server

    Cveticanin, Livija

    2017-01-01

    This book outlines an analytical solution procedure of the pure nonlinear oscillator system, offering a solution for free and forced vibrations of the one-degree-of-freedom strong nonlinear system with constant and time variable parameter. Includes exercises.

  3. 非线性压电振动能量采集器的振动特性与实验研究%Vibration Performances and Experiments of Nonlinear Piezoelectric Vibration Energy Harvester

    Institute of Scientific and Technical Information of China (English)

    王光庆; 张伟; 刘创; 杨斌强; 廖维新

    2015-01-01

    In order to improve the output performances of the linear piezoelectric vibration energy harvester (PVEH),a bistable nonlinear PVEH was developed by adding a Duffing nonlinear magnetic force to a tip end of the linear PVEH. The governing motion of the nonlinear electromechanical lumped parameter of the bistable PVEH was derived with considering the dynamic shape and the axial strain of the cantilevered beam of the linear PVEH ,a four or five order Runge-Kutta algorithm was used to analyze the dynamic behaviors. The frequency responding function was derived with the resonant balance method;the effects of the exciting frequency,the exciting amplitude and the distance between the two magnets were numerically studied. The research results have shown that the bistable mo-tion can not only improve the operating frequency wideband and the energy harvesting efficiency,but also easily make it move in a periodic large-amplitude orbit under a low exciting frequency and amplitude. At last,some experi-ments are carried out to testify the validity of the numerical results.%为了提高线性压电振动能量采集器的输出特性,在线性压电振动能量采集器悬臂梁末端引入Duffing非线性磁力,构造了一种双稳态非线性压电振动能量采集器;综合考虑能量采集器的动态振型与轴向应变分布情况,建立了系统非线性机电耦合集总参数运动控制模型,并利用4阶、5阶Runge-Kutta算法对能量采集器的非线性振动特性进行了数值模拟;利用谐波平衡法计算获得了能量采集器的幅频响应方程,数值分析了激励频率、激励幅值以及磁铁间距等对系统非线性振动特性的影响,发现双稳态运动可以极大地提高能量采集器的频率响应范围和能量采集效率,并且能量采集器在低频、低幅值激励情况下可以产生大幅值周期运动;最后,通过实验对数值计算结果进行了验证.

  4. 分子高激发振动态的经典非线性性质%The classical nonlinear properties of molecular highly excited vibration

    Institute of Scientific and Technical Information of China (English)

    吴国祯

    2011-01-01

    The concepts of classical nonlinear dynamics are employed to interpret the spectroscopic properties of the molecular highly excited vibration. These concepts include the Morse oscillator, the pendulum dynamics, chaos and the overlapping of resonances leading to chaos. The relations of resonance, constant of motion and the basic dynamical unit to the pendulum dynamics are stressed. An algebraic Hamiltonian in the coset space is employed for the dynamical analysis from which the dynamical potential can be easily obtained. The dynamical potential is closely related to the classical fixed points in which the quantized levels are embedded in various quantal environments.Localized modes are easily identified in various systems which share similar dynamical potentials. The dissociation of DCO radical is finally interpreted by these concepts from the classical nonlinear dynamics.%该文阐述如何运用经典非线性力学的概念,来理解分子高激发振动态的谱学性质.内容包括:莫尔斯振子,单摆的动力学和共振的关系,力学体系的构成单元是单摆,一个共振对应于一个守恒量,混沌,共振的重叠导致混沌的产生等.我们的出发点是运用二次量子化算子构成的代数哈密顿量,经由海森伯对应而得到的陪集空间上的动力学体系.从此哈密顿量,可以得到动力学势.而动力学势和经典的不动点关系密切,并且量子态就处在由动力学势所包围,分成的几个量子环境中.从动力学势,可以依据它的对称性,方便推得局域模式的存在,最后我们利用这些非线性力学的概念,来分析DCO分子高激发振动态的解离问题.

  5. Waveform-dependent absorbing metasurfaces

    CERN Document Server

    Wakatsuchi, Hiroki; Rushton, Jeremiah J; Sievenpiper, Daniel F

    2014-01-01

    We present the first use of a waveform-dependent absorbing metasurface for high-power pulsed surface currents. The new type of nonlinear metasurface, composed of circuit elements including diodes, is capable of storing high power pulse energy to dissipate it between pulses, while allowing propagation of small signals. Interestingly, the absorbing performance varies for high power pulses but not for high power continuous waves (CWs), since the capacitors used are fully charged up. Thus, the waveform dependence enables us to distinguish various signal types (i.e. CW or pulse) even at the same frequency, which potentially creates new kinds of microwave technologies and applications.

  6. 摩擦对齿轮系统非线性振动及稳定性影响研究%Effect of Friction on the Nonlinear Vibration and Stability of Gear System

    Institute of Scientific and Technical Information of China (English)

    卫一多; 刘凯; 马朝锋; 赵常青; 原园

    2012-01-01

    To eluicdatie the mechanism effect of friction on the nonlinear vibration and stability of gear system,a nonlinear vibration of torsional model with time-varying stiffness and friction was established,numerical method and analytical expression were given to solve the problem,study the non-linear response and parametric stability of gear system with double periodic parametrically.Effects of the system parameters,such as friction coefficient,mesh stiffneee factor and load sharing coefficient,on the nonlinear vibration response and parametric stability of gear system were investigated.Simulation results demonstrated that rational dynamics parameters can efficiently control the response peak of friction and reduce instability domain.%为研究摩擦对齿轮系统非线性振动的响应和稳定性的影响机理,建立考虑轮齿时变刚度和齿间摩擦的扭转非线性振动模型,用理论解析和数值计算结合的方法,研究周期双参变激励齿轮系统,在摩擦力作用下非线性振动响应和系统参数稳定性问题。研究了摩擦系数、啮合刚度因子及齿间载荷分配系数等参数,对齿轮系统非线性振动响应和参数稳定性的影响。仿真结果证明:合理设计齿轮系统的动力学参数,可有效抑制由摩擦引起的响应峰值和减小系统参数的不稳定性区域。

  7. Nonlinear characteristic analyses of pneumatic vibration isolation system with a multi-frequency excitation%多频激励下气动隔振系统非线性特性分析

    Institute of Scientific and Technical Information of China (English)

    钟艳春; 杨庆俊; 包钢

    2011-01-01

    The nonlinear dynamics characteristic of pneumatic vibration isolation system with a multi-frequency excitation was studied with the method of nonlinear dynamics. First, relative load curve of an air spring under a certain initial pressure was obtained by test, and based on the test data, a cube polynomial equation was obtained by means of nonlinear polynomial curve fitting according to the equilibrium heights of the air spring. Then, the nonlinear model of pneumatic vibration isolation system with a multi-frequency excitation was built and nonlinear dynamics equation was obtained according to nonlinear restoring force of the air spring. Next, the method of multiple scales was used to solve the nonlinear dynamics equation. Finally, combination resonance of pneumatic vibration isolation system with a multi-frequency excitation was analyzed and influences of the nonlinear parameter to the system were discussed. The results show that when combination frequencies are near the linearized natural frequency, combination resonance becomes strong. Cube nonlinear parameter directly influences nonlinear characteristic of the system, the greater the excitation amplitude, the more obvious of the nonlinear characteristic.%运用非线性动力学的方法研究气动隔振系统在多个频率激励下的非线性动力学特性.通过试验的方法得到空气弹簧在一定初始压力下的相对载荷曲线,以空气弹簧工作高度为自变量,用三次多项式对该曲线进行非线性拟合,得到弹簧非线性恢复力与工作高度的三次多项式表达式.建立气动隔振系统在3个激励频率下的非线性模型,根据弹簧的非线性恢复力,得到系统的非线性动力学方程.运用多尺度法对该非线性动力学方程进行求解,分析3个频率共同作用下的组合共振,讨论各非线性参数对系统的影响.研究结果表明:当组合频率接近系统线性化固有频率时,系统具有很强的组合共振;三次非线性

  8. Vibrational Spectroscopy of Biomembranes

    Science.gov (United States)

    Schultz, Zachary D.; Levin, Ira W.

    2011-07-01

    Vibrational spectroscopy, commonly associated with IR absorption and Raman scattering, has provided a powerful approach for investigating interactions between biomolecules that make up cellular membranes. Because the IR and Raman signals arise from the intrinsic properties of these molecules, vibrational spectroscopy probes the delicate interactions that regulate biomembranes with minimal perturbation. Numerous innovative measurements, including nonlinear optical processes and confined bilayer assemblies, have provided new insights into membrane behavior. In this review, we highlight the use of vibrational spectroscopy to study lipid-lipid interactions. We also examine recent work in which vibrational measurements have been used to investigate the incorporation of peptides and proteins into lipid bilayers, and we discuss the interactions of small molecules and drugs with membrane structures. Emerging techniques and measurements on intact cellular membranes provide a prospective on the future of vibrational spectroscopic studies of biomembranes.

  9. Improved Active Vibration Isolation Systems

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The control force, feedback gain, and actuator stroke of several active vibration isolation systems were analyzed based on a single-layer active vibration isolation system. The analysis shows that the feedback gain and actuator stroke cannot be selected independently and the active isolation system design must make a compromise between the feedback gain and actuator stroke. The performance of active isolation systems can be improved by the joint vibration reduction using an active vibration isolation system with an adaptive dynamic vibration absorber. The results show that the joint vibration reduction method can successfully avoid the compromise between the feedback gain and actuator stroke. The control force and the object vibration amplitude are also greatly reduced.

  10. NON-LINEAR FREE VIBRATION OF FINITE-LENGTH BEAMS ON THE WINKLER FOUNDATION%Winkler地基上有限长梁非线性自由振动

    Institute of Scientific and Technical Information of China (English)

    马建军; 刘齐建; 王连华; 赵跃宇

    2012-01-01

    基于经典Winkler地基模型及Euler—Bernoulli梁理论,考虑梁的几何非线性效应,运用Newton第二定律建立了弹性地基上有限长梁的非线性运动方程。采用Galerkin方法对运动方程进行一阶模态截断,进而利用多尺度法求得了该系统自由振动的一阶近似解。揭示了两端简支梁的非线性自由振动特性,分析了弹性模量、长细比及地基刚度系数等参数对系统固有频率的影响。并通过该系统的位移时程曲线,分析了阻尼对弹性地基上梁运动特性的影响。%The non-linear free vibration of a finite-length beam on the elastic foundation is investigated. Based on the Winkler foundation model and Euler-Bernoulli beam theory, the nonlinear motion equation of the finite-length beam on an elastic foundation with geometric nonlinearity is deduced based on the Newton's Second Law. The first-order mode truncation of the vibration function is obtained using the Galerkin method. The approximate solution of the free vibration of the finite-length beam is derived utilizing the multi-scale method to illustrate the behaviour of the non-linear free vibration. The effects of the slenderness ratio of beam, the modulus of elastic system and the stiffness of foundation on the natural frequency of the hinged-hinged beam on the Winkler foundation are analyzed. The influence of damping of the soil-beam system on the motion of the beam is also discussed.

  11. Applications of equivalent linearization approaches to nonlinear piping systems

    Energy Technology Data Exchange (ETDEWEB)

    Park, Y.; Hofmayer, C. [Brookhaven National Lab., Upton, NY (United States); Chokshi, N. [Nuclear Regulatory Commission, Washington, DC (United States)

    1997-04-01

    The piping systems in nuclear power plants, even with conventional snubber supports, are highly complex nonlinear structures under severe earthquake loadings mainly due to various mechanical gaps in support structures. Some type of nonlinear analysis is necessary to accurately predict the piping responses under earthquake loadings. The application of equivalent linearization approaches (ELA) to seismic analyses of nonlinear piping systems is presented. Two types of ELA`s are studied; i.e., one based on the response spectrum method and the other based on the linear random vibration theory. The test results of main steam and feedwater piping systems supported by snubbers and energy absorbers are used to evaluate the numerical accuracy and limitations.

  12. Fundamental study of subharmonic vibration of order 1/2 in automatic transmissions for cars

    Science.gov (United States)

    Ryu, T.; Nakae, T.; Matsuzaki, K.; Nanba, A.; Takikawa, Y.; Ooi, Y.; Sueoka, A.

    2016-09-01

    A torque converter is an element that transfers torque from the engine to the gear train in the automatic transmission of an automobile. The damper spring of the lock-up clutch in the torque converter is used to effectively absorb the torsional vibration caused by engine combustion. A damper with low stiffness reduces fluctuations in rotational speed but is difficult to use because of space limitations. In order to address this problem, the damper is designed using a piecewise-linear spring with three stiffness stages. However, the damper causes a nonlinear vibration referred to as a subharmonic vibration of order 1/2. In the subharmonic vibration, the frequency is half that of the vibrations from the engine. In order to clarify the mechanism of the subharmonic vibration, in the present study, experiments are conducted using the fundamental experimental apparatus of a single-degree-of-freedom system with two stiffness stages. In the experiments, countermeasures to reduce the subharmonic vibration by varying the conditions of the experiments are also performed. The results of the experiments are evaluated through numerical analysis using the shooting method. The experimental and analytical results were found to be in close agreement.

  13. Nonlinear Approaches in Engineering Applications

    CERN Document Server

    Jazar, Reza

    2012-01-01

    Nonlinear Approaches in Engineering Applications focuses on nonlinear phenomena that are common in the engineering field. The nonlinear approaches described in this book provide a sound theoretical base and practical tools to design and analyze engineering systems with high efficiency and accuracy and with less energy and downtime. Presented here are nonlinear approaches in areas such as dynamic systems, optimal control and approaches in nonlinear dynamics and acoustics. Coverage encompasses a wide range of applications and fields including mathematical modeling and nonlinear behavior as applied to microresonators, nanotechnologies, nonlinear behavior in soil erosion,nonlinear population dynamics, and optimization in reducing vibration and noise as well as vibration in triple-walled carbon nanotubes. This book also: Provides a complete introduction to nonlinear behavior of systems and the advantages of nonlinearity as a tool for solving engineering problems Includes applications and examples drawn from the el...

  14. Insight into magnetorheological shock absorbers

    CERN Document Server

    Gołdasz, Janusz

    2015-01-01

    This book deals with magnetorheological fluid theory, modeling and applications of automotive magnetorheological dampers. On the theoretical side a review of MR fluid compositions and key factors affecting the characteristics of these fluids is followed by a description of existing applications in the area of vibration isolation and flow-mode shock absorbers in particular. As a majority of existing magnetorheological devices operates in a so-called flow mode a critical review is carried out in that regard. Specifically, the authors highlight common configurations of flow-mode magnetorheological shock absorbers, or so-called MR dampers that have been considered by the automotive industry for controlled chassis applications. The authors focus on single-tube dampers utilizing a piston assembly with one coil or multiple coils and at least one annular flow channel in the piston.

  15. CISM course on exploiting nonlinear behaviour in structural dynamics

    CERN Document Server

    Virgin, Lawrence; Exploiting Nonlinear Behavior in Structural Dynamics

    2012-01-01

    The articles in this volume give an overview and introduction to nonlinear phenomena in structural dynamics. Topics treated are approximate methods for analyzing nonlinear systems (where the level of nonlinearity is assumed to be relatively small), vibration isolation, the mitigation of undesirable torsional vibration in rotating systems utilizing specifically nonlinear features in the dynamics, the vibration of nonlinear structures in which the motion is sufficiently large amplitude and structural systems with control.

  16. Contributions to the Study of Dynamic Absorbers, a Case Study

    Directory of Open Access Journals (Sweden)

    Monica Balcau

    2012-01-01

    Full Text Available Dynamic absorbers are used to reduce torsional vibrations. This paper studies the effect of a dynamic absorber attached to a mechanical system formed of three reduced masses which are acted on by one, two or three order x harmonics of a disruptive force.

  17. Vibration state estimation of nonlinear suspension system based on feedback linearization%基于反馈线性化的非线性悬架系统振动状态观测

    Institute of Scientific and Technical Information of China (English)

    陈思忠; 卢凡; 吴志成; 杨林; 赵玉壮

    2015-01-01

    针对悬架系统非线性特性提出反馈线性化卡尔曼滤波算法。基于微分几何理论,通过求解坐标变换,将车辆非线性振动模型变换成可观测标准型,实现系统精确反馈线性化;采用线性卡尔曼滤波算法,针对变换的线性系统设计观测器,通过坐标逆变换获得原非线性系统的状态观测值。仿真结果表明,该算法能提高车辆振动状态观测精度、降低运算量。%Aiming at the nonlinearity of suspension system,a feedback linearization Kalman filter algorithm was proposed.Based on the differential geometry theory,the nonlinear vehicle vibration model was transformed into a certain observable normal form via the change of state coordinates.Based on the obtained linearized system,an observer was designed by using Kalman filter algorithm.Finally the estimated states of the nonlinear system were obtained through inverse transformation.The simulation results show that compared with the extended Kalman observer,the proposed algorithm can improve the observation accuracy of vehicle vibration states and reduce computational complexity.

  18. Storsional self-excited vibration of rolling mill

    Institute of Scientific and Technical Information of China (English)

    唐华平; 严珩志; 钟掘

    2002-01-01

    The roller's torsional self-excited vibration caused by roller stick-slip,and its influence on strip surface quality have been studied.Based on analysis of roller working surface stick-slip,roller rotation dynamics equations have been established.The nonlinear sliding-frictional resistance has been linearized,and dynamics equations have been solved according to the characteristics of stick and slip between roller and strip.The results show that: 1) with decreasing stick time t 1,torsional vibration wave pattern gradually transforms from serration into sinusoid,and frictional self-excited vibration can cover all frequency components which are lower than that of free vibration;2) stick time t 1 is directly proportional to torque increment Δ MR ,and is inversely proportional to live shaft stiffness K and drive shaft rotational velocity ω ;3) when slip time t 2 is basically steady,the longer the stick time,the larger the energy that system absorbs and discharges.As the slip time is a constant,it easily arouses strip surface shear impact and surface streaks.

  19. Vibration reduction using autoparametric resonance in a high-Tc superconducting levitation system

    Science.gov (United States)

    Yamasaki, Hiroshi; Takazakura, Toyoki; Sakaguchi, Ryunosuke; Sugiura, Toshihiko

    2014-05-01

    High-Tc superconducting levitation systems have very small damping and enable stable levitation without control. Therefore, they can be applied to various kinds of application. However, there are some problems that small damping produces large vibration and nonlinearity of magnetic force can generate complicated phenomena. Accordingly, analysis of these phenomena and reduction of vibration occurring in the system are important. In this study, we examined reduction of vibration without using any absorbers, but utilizing autoparametric resonance caused by nonlinear coupling between vertical oscillation and horizontal oscillation. We conducted numerical analysis and experiments in order to investigate motions of a rigid bar levitated by the electromagnetic force from high-Tc superconductors. As a result, if the ratio of the natural frequency of vertical oscillation and that of horizontal oscillation is two to one, the vertical oscillation decreases while the horizontal oscillation is excited. Thus, it was confirmed that the amplitude of a primary resonance can be reduced by occurrence of autoparametric resonance without using any absorbers.

  20. 等高齿锥齿轮非线性振动特性的联合求解方法%Integrated solution approach for non-linear vibration characteristics of cycloid bevel gear

    Institute of Scientific and Technical Information of China (English)

    刘志峰; 蒋凤麒; 杨文通; 蔡力钢

    2012-01-01

    The transmission error is an important factor causing nonlinear vibration of cycloid bevel gear, and the vibration characteristics of gear system can be improved by prediction and calculation of the dynamic transmission error of cycloid bevel gear. The dynamic response characteristics of cycloid bevel gear were discussed under a range of operation speeds and acting torques. A new approach of surface integration and local FEM was proposed to solve the dynamic transmission error. And then, the strong nonlinear vibration characteristics of gear system were analysed. In the approach, it is no longer necessary to consider the nonlinear factors, such as the lime-varied stiffness and meshing frequency variation, as external excitations. However, in every lime step of gear meshing the dynamic mesh force and dynamic transmission error were calculated, and finally the nonlinear vibration characteristics of cycloid bevel gear were achieved. The approach can precisely present the key factors of the gear teeth, including the tooth geometry and tooth contact stress, which influence the dynamic characteristics of cycloid bevel gear significantly and provides an effective method for the analysis of complex vibration characteristics of cycloid bevel gear transmission system.%齿轮重载啮合中发生的轮齿接触损失会引起齿轮传动中的动态传递误差,动态传递误差的存在是等高齿锥齿轮非线性振动的重要原因,准确预测和计算等高齿锥齿轮传动中的动态传递误差是进一步改善这类齿轮系统振动特性的有效手段.针对某重载等高齿锥齿轮,研究其在一定运行速度和扭矩范围内的频率响应特性,运用一种新的曲面积分与局部有限元联合求解方法求解了等高齿锥齿轮传动中的动态传递误差,揭示出此类传动系统振动的强非线性特性.这种方法无需将时变拟合刚度和啮合频率变量等非线性因素作为外部的激励进行求解,而是从齿轮啮