WorldWideScience

Sample records for nonionic fluorinated surfactant

  1. Inactivation of Herpes Simplex Viruses by Nonionic Surfactants

    Science.gov (United States)

    Asculai, Samuel S.; Weis, Margaret T.; Rancourt, Martha W.; Kupferberg, A. B.

    1978-01-01

    Nonionic surface-active agents possessing ether or amide linkages between the hydrophillic and hydrophobic portions of the molecule rapidly inactivated the infectivity of herpes simplex viruses. The activity stemmed from the ability of nonionic surfactants to dissolve lipid-containing membranes. This was confirmed by observing surfactant destruction of mammalian cell plasma membranes and herpes simplex virus envelopes. Proprietary vaginal contraceptive formulations containing nonionic surfactants also inactivated herpes simplex virus infectivity. This observation suggests that nonionic surfactants in appropriate formulation could effectively prevent herpes simplex virus transmission. Images PMID:208460

  2. Modeling of the Critical Micelle Concentration (CMC) of Nonionic Surfactants with an Extended Group-Contribution Method

    DEFF Research Database (Denmark)

    Mattei, Michele; Kontogeorgis, Georgios; Gani, Rafiqul

    2013-01-01

    A group-contribution (GC) property prediction model for estimating the critical micelle concentration (CMC) of nonionic surfactants in water at 25 °C is presented. The model is based on the Marrero and Gani GC method. A systematic analysis of the model performance against experimental data...... is carried out using data for a wide range of nonionic surfactants covering a wide range of molecular structures. As a result of this procedure, new third order groups based on the characteristic structures of nonionic surfactants are defined and are included in the Marrero and Gani GC model. In this way...... of 150 experimental measurements covering a large variety of nonionic surfactants including linear, branched, and phenyl alkyl ethoxylates; alkanediols; alkyl mono- and disaccharide ethers and esters; ethoxylated alkyl amines and amides; fluorinated linear ethoxylates and amides; polyglycerol esters...

  3. INTERACTIONS BETWEEN WATER-SOLUBLE NONIONIC POLYMERS AND SURFACTANT AGGREGATES

    NARCIS (Netherlands)

    BRACKMAN, JC; ENGBERTS, JBFN; Herb, CA; Prudhomme, RK

    1994-01-01

    The influence of the chemical structure and charge of the surfactant on polymer-micelle interaction has been studied using various ionic and non-ionic surfactants, and surfactants of which the charge can be varied by (de)protonation. Octylthioglucoside, dodecyldimethylamine-oxide, alkylphosphates,

  4. Triblock Copolymers with Grafted Fluorine-Free Amphiphilic Non-Ionic Side Chains for Antifouling and Fouling-Release Applications

    Energy Technology Data Exchange (ETDEWEB)

    Y Cho; H Sundaram; C Weinman; M Paik; M Dimitriou; J Finlay; M Callow; J Callow; E Kramer; C Ober

    2011-12-31

    Fluorine-free, amphiphilic, nonionic surface active block copolymers (SABCs) were synthesized through chemical modification of a polystyrene-block-poly(ethylene-ran-butylene)-block-polyisoprene triblock copolymer precursor with selected amphiphilic nonionic Brij and other surfactants. Amphiphilicity was imparted by a hydrophobic aliphatic group combined with a hydrophilic poly(ethylene glycol) (PEG) group-containing moiety. The surfaces were characterized by dynamic water contact angle, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), and near edge X-ray absorption fine structure (NEXAFS) analysis. In biofouling assays, settlement (attachment) of both spores of the green alga Ulva and cells of the diatom Navicula on SABCs modified with Brij nonionic side chains was significantly reduced relative to a PDMS standard, with a nonionic surfactant combining a PEG group and an aliphatic moiety demonstrating the best performance. Additionally, a fouling-release assay using sporelings (young plants) of Ulva and Navicula suggested that the SABC derived from nonionic Brij side chains also out-performed PDMS as a fouling-release material. Good antifouling and fouling-release properties were not demonstrated for the other two amphiphilic surfaces derived from silicone and aromatic group containing nonionic surfactants included in this study. The results suggest that small differences in chemical surface functionality impart more significant changes with respect to the antifouling settlement and fouling-release performance of materials than overall wettability behavior.

  5. Nonionic surfactant Brij35 effects on toluene biodegradation in a ...

    African Journals Online (AJOL)

    Nonionic surfactant effects on the toluene dissolved in the water phase and biodegradation kinetic behaviors of toluene in a composite bead biofilter were investigated. The toluene dissolved in the water phase was enhanced by the addition of surfactant into aqueous solution and the enhancing effect was more pronounced ...

  6. Small-angle neutron scattering studies of nonionic surfactant: Effect

    Indian Academy of Sciences (India)

    Micellar solution of nonionic surfactant -dodecyloligo ethyleneoxide surfactant, decaoxyethylene monododecyl ether [CH3(CH2)11(OCH2CH2)10OH], C12E10 in D2O solution have been analysed by small-angle neutron scattering (SANS) at different temperatures (30, 45 and 60°C) both in the presence and absence of ...

  7. Complex phase behavior in solvent-free nonionic surfactants

    DEFF Research Database (Denmark)

    Hillmyer, M.A.; Bates, F.S.; Almdal, K.

    1996-01-01

    Unsolvated block copolymers and surfactant solutions are ''soft materials'' that share a common set of ordered microstructures, A set of polyethyleneoxide-polyethylethylene (PEG-PEE) block copolymers that are chemically similar to the well-known alkane-oxyethylene (C(n)EO(m)) nonionic surfactants...... was synthesized here. The general phase behavior in these materials resembles that of both higher molecular weight block copolymers and lower molecular weight nonionic surfactant solutions. Two of the block copolymers exhibited thermally induced order-order transitions and were studied in detail by small...

  8. Small angle neutron scattering study of two nonionic surfactants in ...

    Indian Academy of Sciences (India)

    cO Indian Academy of Sciences. Vol. 71, No. 5. — journal of. November 2008 physics pp. 1079–1083. Small angle neutron scattering study of two nonionic surfactants in water micellar solutions. RAJEWSKA ALDONA. Institute of Atomic Energy, 05-400 Swierk-Otwock, Poland. E-mail: aldonar@cyf.gov.pl. Abstract.

  9. The influence of nonionic surfactant Brij 30 on biodegradation of ...

    African Journals Online (AJOL)

    ONOS

    2010-09-06

    Sep 6, 2010 ... kinetic behaviors of toluene in a polyvinyl alcohol (PVA)/peat/KNO3/ (granular activated carbon) GAC composite bead biofilter ... The maximum elimination capacity decreased with increasing surfactant content. The addition of nonionic ... Chan and Peng, 2008). Toluene is a widely used industrial chemical.

  10. Small angle neutron scattering study of two nonionic surfactants in ...

    Indian Academy of Sciences (India)

    nonionic surfactants in water micellar solutions. RAJEWSKA ALDONA. Institute of ... water solution for concentration c = 0.17% (dilute regime) at different temperatures in the range t = 10–35°C by small .... which yields the pair distance distribution function p(r), where r is the distance in real space. The point, at which the p(r) ...

  11. Modeling of the Critical Micelle Concentration (CMC) of Nonionic Surfactants with an Extended Group-Contribution Method

    DEFF Research Database (Denmark)

    Mattei, Michele; Kontogeorgis, Georgios; Gani, Rafiqul

    2013-01-01

    of 150 experimental measurements covering a large variety of nonionic surfactants including linear, branched, and phenyl alkyl ethoxylates; alkanediols; alkyl mono- and disaccharide ethers and esters; ethoxylated alkyl amines and amides; fluorinated linear ethoxylates and amides; polyglycerol esters...... concentration, and in particular, the quantitative structure−property relationship models, the developed GC model provides an accurate correlation and allows for an easier and faster application in computer-aided molecular design techniques facilitating chemical process and product design....

  12. Thermodynamics of non-ionic surfactant Triton X-100-cationic surfactants mixtures at the cloud point

    International Nuclear Information System (INIS)

    Batigoec, Cigdem; Akbas, Halide; Boz, Mesut

    2011-01-01

    Highlights: → Non-ionic surfactants are used as emulsifier and solubilizate in such as textile, detergent and cosmetic. → Non-ionic surfactants occur phase separation at temperature as named the cloud point in solution. → Dimeric surfactants have attracted increasing attention due to their superior surface activity. → The positive values of ΔG cp 0 indicate that the process proceeds nonspontaneous. - Abstract: This study investigates the effects of gemini and conventional cationic surfactants on the cloud point (CP) of the non-ionic surfactant Triton X-100 (TX-100) in aqueous solutions. Instead of visual observation, a spectrophotometer was used for measurement of the cloud point temperatures. The thermodynamic parameters of these mixtures were calculated at different cationic surfactant concentrations. The gemini surfactants of the alkanediyl-α-ω-bis (alkyldimethylammonium) dibromide type, on the one hand, with different alkyl groups containing m carbon atoms and an ethanediyl spacer, referred to as 'm-2-m' (m = 10, 12, and 16) and, on the other hand, with -C 16 alkyl groups and different spacers containing s carbon atoms, referred to as '16-s-16' (s = 6 and 10) were synthesized, purified and characterized. Additions of the cationic surfactants to the TX-100 solution increased the cloud point temperature of the TX-100 solution. It was accepted that the solubility of non-ionic surfactant containing polyoxyethylene (POE) hydrophilic chain was a maximum at the cloud point so that the thermodynamic parameters were calculated at this temperature. The results showed that the standard Gibbs free energy (ΔG cp 0 ), the enthalpy (ΔH cp 0 ) and the entropy (ΔS cp 0 ) of the clouding phenomenon were found positive in all cases. The standard free energy (ΔG cp 0 ) increased with increasing hydrophobic alkyl chain for both gemini and conventional cationic surfactants; however, it decreased with increasing surfactant concentration.

  13. Ecotoxicological characterization of polyoxyethylene glycerol ester non-ionic surfactants and their mixtures with anionic and non-ionic surfactants.

    Science.gov (United States)

    Ríos, Francisco; Fernández-Arteaga, Alejandro; Lechuga, Manuela; Fernández-Serrano, Mercedes

    2017-04-01

    This paper reports on a study that investigated the aquatic toxicity of new non-ionic surfactants derived from renewable raw materials, polyoxyethylene glycerol ester (PGE), and their binary mixtures with anionic and non-ionic surfactants. Toxicity of pure PGEs was determined using representative organisms from different trophic levels: luminescent bacteria (Vibrio fischeri), microalgae (Pseudokirchneriella subcapitata), and freshwater crustaceans (Daphnia magna). Relationships between toxicity and the structural parameters such as unit of ethylene oxide (EO) and hydrophilic-lipophilic balance (HLB) were evaluated. Critical micellar concentration (CMC) in the conditions of the toxicity test was also determined. It was found that the toxicity of the aqueous solutions of PGE decreased when the number of EO units in the molecule, HLB, and CMC increased. PGEs showed lower CMC in marine medium, and the toxicity to V. ficheri is lower when the CMC was higher. Given their non-polar nature, narcosis was expected to be the primary mode of toxic action of PGEs. For the mixture of surfactants, we observed that the mixtures with PGE that had the higher numbers of EO units were more toxic than the aqueous solutions of pure surfactants. Moreover, we found that concentration addition was the type of action more likely to occur for mixtures of PGE with lower numbers of EO units with non-ionic surfactants (alkylpolyglucoside and fatty alcohol ethoxylate), whereas for the mixture of PGE with lower EO units and anionic surfactant (ether carboxylic derivative), the most common response type was response addition. In case of mixtures involving amphoteric surfactants and PGEs with the higher numbers of EO units, no clear pattern with regard to the mixture toxicity response type could be observed.

  14. (Cationic + nonionic) mixed surfactant aggregates for solubilisation of curcumin

    International Nuclear Information System (INIS)

    Kumar, Arun; Kaur, Gurpreet; Kansal, S.K.; Chaudhary, G.R.; Mehta, S.K.

    2016-01-01

    Highlights: • Critical micelle concentration of mixed surfactant has been measured. • Aqueous solubility and alkaline stability of curcumin has been significantly improved. • Location of curcumin within micelles has been evaluated. • Scavenging activity of curcumin has been improved. • Non-intercalative binding with ct-DNA has been observed. - Abstract: Curcumin is a potential drug for variety of diseases. Major limitations of curcumin are low water solubility, rapid hydrolytic degradation in alkaline medium and poor bioavailability. To overcome these limitations, highly potential mixed micellar system has been prepared. In order to reduce inter ionic repulsion and precipitation of surfactants, (cationic + non-ionic) mixed system have been chosen that directly influence its applicability. Hydrophobic chain of non-ionic surfactant significantly influences the cmc of mixed surfactant system as indicated by fluorescence and conductivity data. UV–visible spectroscopy analyses show that solubility, stability and antioxidant property of the curcumin is remarkably improved depending on cmc and aggregation number (N agg ) of mixed surfactants, where N agg plays crucial role. Generally, curcumin undergoes complete degradation in slight basic medium, but stability has been maintained up to 8 h at pH-13 using formulated mixed micelles (only (20 to 25)% degraded). Location of curcumin which is monitored using emission spectroscopy, fluorescence quenching and 1 H NMR spectroscopy techniques play the most important role. Observed results show that the major population of curcumin is located at the polar region and some are in hydrophobic region of the mixed micelles. To ensure the effect of mixed surfactants and curcumin loaded mixed surfactants on DNA, the interaction parameter indicates non-interclative interactions.

  15. Identification of novel fluorinated surfactants in aqueous film forming foams and commercial surfactant concentrates.

    Science.gov (United States)

    D'Agostino, Lisa A; Mabury, Scott A

    2014-01-01

    Recent studies comparing the results of total organofluorine-combustion ion chromatography (TOF-CIC) to targeted analysis of perfluoroalkyl and polyfluoroalkyl substances (PFASs) by liquid chromatography tandem mass spectrometry (LC-MS/MS) have shown that a significant yet variable portion of the total organofluorine in environmental and biological samples is in the form of unknown PFASs. A portion of this unknown organofluorine likely originates in proprietary fluorinated surfactants not included in LC-MS/MS analyses and not fully characterized by the environmental science community, which may enter the environment through use in aqueous film forming foams (AFFFs) for firefighting. Contamination of water, biota, and soils with various PFASs due to AFFF deployment has been documented. Ten fluorinated AFFF concentrates, 9 of which were obtained from fire sites in Ontario, Canada, and two commercial fluorinated surfactant concentrates were characterized in order to identify novel fluorinated surfactants. Mixed-mode ion exchange solid phase extraction (SPE) fractionated fluorinated surfactants based on ionic character. High resolution mass spectrometry assigned molecular formulas to fluorinated surfactant ions, while collision induced dissociation (CID) spectra assisted structural elucidation. LC-MS/MS detected isomers and low abundance fluorinated chain lengths. In total, 12 novel and 10 infrequently reported PFAS classes were identified in fluorinated chain lengths from C3 to C15 for a total of 103 compounds. Further research should examine the environmental fate and toxicology of these PFASs, especially their potential as perfluoroalkyl acid (PFAA) precursors.

  16. Thermodynamics of non-ionic surfactant Triton X-100-cationic surfactants mixtures at the cloud point

    Energy Technology Data Exchange (ETDEWEB)

    Batigoec, Cigdem [Department of Chemistry, Faculty of Sciences, Trakya University, 22030 Edirne (Turkey); Akbas, Halide, E-mail: hakbas34@yahoo.com [Department of Chemistry, Faculty of Sciences, Trakya University, 22030 Edirne (Turkey); Boz, Mesut [Department of Chemistry, Faculty of Sciences, Trakya University, 22030 Edirne (Turkey)

    2011-12-15

    Highlights: > Non-ionic surfactants are used as emulsifier and solubilizate in such as textile, detergent and cosmetic. > Non-ionic surfactants occur phase separation at temperature as named the cloud point in solution. > Dimeric surfactants have attracted increasing attention due to their superior surface activity. > The positive values of {Delta}G{sub cp}{sup 0} indicate that the process proceeds nonspontaneous. - Abstract: This study investigates the effects of gemini and conventional cationic surfactants on the cloud point (CP) of the non-ionic surfactant Triton X-100 (TX-100) in aqueous solutions. Instead of visual observation, a spectrophotometer was used for measurement of the cloud point temperatures. The thermodynamic parameters of these mixtures were calculated at different cationic surfactant concentrations. The gemini surfactants of the alkanediyl-{alpha}-{omega}-bis (alkyldimethylammonium) dibromide type, on the one hand, with different alkyl groups containing m carbon atoms and an ethanediyl spacer, referred to as 'm-2-m' (m = 10, 12, and 16) and, on the other hand, with -C{sub 16} alkyl groups and different spacers containing s carbon atoms, referred to as '16-s-16' (s = 6 and 10) were synthesized, purified and characterized. Additions of the cationic surfactants to the TX-100 solution increased the cloud point temperature of the TX-100 solution. It was accepted that the solubility of non-ionic surfactant containing polyoxyethylene (POE) hydrophilic chain was a maximum at the cloud point so that the thermodynamic parameters were calculated at this temperature. The results showed that the standard Gibbs free energy ({Delta}G{sub cp}{sup 0}), the enthalpy ({Delta}H{sub cp}{sup 0}) and the entropy ({Delta}S{sub cp}{sup 0}) of the clouding phenomenon were found positive in all cases. The standard free energy ({Delta}G{sub cp}{sup 0}) increased with increasing hydrophobic alkyl chain for both gemini and conventional cationic

  17. Impact of non-ionic surfactant chemical structure on morphology and stability of polystyrene nanocomposite latex

    CSIR Research Space (South Africa)

    Greesh, N

    2016-01-01

    Full Text Available Polystyrene (PS) colloid particles in presence of non-ionic surfactant-modified clay particles were prepared by the free-radical polymerization of styrene monomers in emulsion. Three different types of non-ionic surfactants, sorbitan monopalmitate...

  18. Re-dissolution and de-compaction of DNA-cationic surfactant complexes using non-ionic surfactants.

    Science.gov (United States)

    Corbyn, Conrad P; Fletcher, Paul D I; Gemici, Rabia; Dias, Rita S; Miguel, Maria G

    2009-12-28

    Addition of a cationic surfactant to a solution of DNA causes the formation of compacted DNA-cationic surfactant complexes which precipitate from aqueous solution. It has been shown previously that addition of anionic surfactant will re-dissolve and de-compact the DNA-cationic surfactant complexes and we find that addition of non-ionic surfactants of the alkylpolyoxyethylene type can be used similarly. In principle, these de-compaction and re-dissolution processes could occur either by stripping of the cationic surfactant from the DNA into mixed micelles with the non-ionic surfactant or by solubilisation of the DNA-cationic surfactant complexes within the non-ionic micelles. Solubility phase-boundary measurements, fluorescence microscopy observations of the de-compaction process and light scattering results indicate that de-compaction and re-dissolution occur by the stripping mechanism, even for non-ionic surfactants where the favourable attractive electrostatic interaction between the two surfactants is absent. Using measurements of critical micelle concentrations and calculations based on regular solution mixed micelle theory, we show that re-dissolution and de-compaction of the DNA-cationic surfactant complexes occurs when the concentration of free monomeric cationic surfactant is reduced (by incorporation into mixed micelles) below a critical value.

  19. Non-ionic surfactant on particles removal in post-CMP cleaning

    International Nuclear Information System (INIS)

    Sun Mingbin; Gao Baohong; Wang Chenwei; Miao Yingxin; Duan Bo; Tan Baimei

    2015-01-01

    The effect of a non-ionic surfactant on particles removal in post-CMP cleaning was investigated. By changing the concentration of the non-ionic surfactant, a series of experiments were performed on the 12 inch Cu pattern wafers in order to determine the best cleaning results. Then the effect of the surfactant on the reduction of defects and the removal of particles was discussed in this paper. What is more, the negative effect of a non-ionic surfactant was also discussed. Based on the experiment results, it is concluded that the non-ionic surfactant could cause good and ill effects at different concentrations in the post-CMP cleaning process. This understanding will serve as a guide to how much surfactant should be added in order to achieve excellent cleaning performance. (semiconductor technology)

  20. The impact of nonionic surfactant additives on the nonequilibrium association between oppositely charged polyelectrolytes and ionic surfactants.

    Science.gov (United States)

    Fegyver, Edit; Mészáros, Róbert

    2014-03-28

    The effect of uncharged surfactant additives on the oppositely charged polyion/ionic surfactant complexation is usually described as a direct equilibrium association between the polyelectrolyte molecules and free mixed micelles analogous to the polyion/colloidal particle interactions. This approach predicts that the binding of the ionic surfactant to the polyelectrolyte molecules can be completely suppressed by increasing the nonionic-to-ionic surfactant ratio. In the present work, it is shown that the addition of nonionic surfactants to poly(diallyldimethylammonium chloride)/sodium dodecyl sulfate mixtures considerably enhances the binding of the anionic surfactant to the polycation in the dilute surfactant concentration regime. The dynamic light scattering, turbidity, electrophoretic mobility and fluorescence spectroscopic measurements are consistent with the synergic binding of the ionic and nonionic surfactants to the polyelectrolyte molecules. The enhanced surfactant binding could be utilized for the preparation of stable colloidal dispersions of novel polyion/mixed surfactant nanoparticles over a wide composition range provided that adequate mixing protocols are used. These results clearly indicate that the nonionic surfactant additives can be successfully used to tune the nonequilibrium association of oppositely charged macromolecules and amphiphiles.

  1. Nanoparticle size controls aggregation in lamellar nonionic surfactant mesophase.

    Science.gov (United States)

    Venugopal, Edakkal; Aswal, Vinod K; Kumaraswamy, Guruswamy

    2013-08-06

    We show that the size of silica nanoparticles influences the nature of their aggregation in an aqueous solution of a relatively hydrophobic nonionic surfactant, C12E4. We present results for dispersions of silica nanoparticles with sizes varying from 8 to 26 nm, in a 75: 25 C12E4/water system, that forms a lamellar phase, Lα, at room temperature. Addition of silica particles does not affect the formation of the Lα phase. Nanoparticles smaller than about 11 nm aggregate irreversibly in the C12E4/water system. However, nanoparticles larger than about 15 nm aggregate in the Lα phase, but are dispersed at temperatures above the Lα order-disorder temperature. Thus, in contrast to the smaller particles, aggregation of silica nanoparticles larger than about 15 nm is reversible with temperature. We use small-angle neutron scattering (SANS) to demonstrate that these results can be explained by the size-dependent wrapping of nanoparticles by surfactant bilayers. Larger particles, above 15 nm in size, are sterically stabilized by the formation of an adsorbed surfactant bilayer. The cost of bilayer bending inhibits adsorption onto the highly curved surfaces of smaller particles, and these "bare" particles aggregate irreversibly.

  2. Microwave-assisted nonionic surfactant extraction of aliphatic hydrocarbons from petroleum source rock

    Energy Technology Data Exchange (ETDEWEB)

    Akinlua, A., E-mail: geochemresearch@yahoo.com [Fossil Fuels and Environmental Geochemistry Group, Department of Chemistry, Obafemi Awolowo University, Ile-Ife (Nigeria); Jochmann, M.A.; Laaks, J.; Ewert, A.; Schmidt, T.C. [Instrumental Analytical Chemistry, University Duisburg-Essen, Universitaetsstr, 5, 45141 Essen (Germany)

    2011-04-08

    The extraction of aliphatic hydrocarbons from petroleum source rock using nonionic surfactants with the assistance of microwave was investigated and the conditions for maximum yield were determined. The results showed that the extraction temperatures and kinetic rates have significant effects on extraction yields of aliphatic hydrocarbons. The optimum temperature for microwave-assisted nonionic surfactant extraction of aliphatic hydrocarbons from petroleum source rock was 105 deg. C. The optimum extraction time for the aliphatic hydrocarbons was at 50 min. Concentration of the nonionic surfactant solution and irradiation power had significant effect on the yields of aliphatic hydrocarbons. The yields of the analytes were much higher using microwave assisted nonionic surfactant extraction than with Soxhlet extraction. The recoveries of the n-alkanes and acyclic isoprenoid hydrocarbons for GC-MS analysis from the extractant nonionic surfactant solution by in-tube extraction (ITEX 2) with a TENAX TA adsorbent were found to be efficient. The results show that microwave-assisted nonionic surfactant extraction (MANSE) is a good and efficient green analytical preparatory technique for geochemical evaluation of petroleum source rock.

  3. Microwave-assisted nonionic surfactant extraction of aliphatic hydrocarbons from petroleum source rock.

    Science.gov (United States)

    Akinlua, A; Jochmann, M A; Laaks, J; Ewert, A; Schmidt, T C

    2011-04-08

    The extraction of aliphatic hydrocarbons from petroleum source rock using nonionic surfactants with the assistance of microwave was investigated and the conditions for maximum yield were determined. The results showed that the extraction temperatures and kinetic rates have significant effects on extraction yields of aliphatic hydrocarbons. The optimum temperature for microwave-assisted nonionic surfactant extraction of aliphatic hydrocarbons from petroleum source rock was 105°C. The optimum extraction time for the aliphatic hydrocarbons was at 50 min. Concentration of the nonionic surfactant solution and irradiation power had significant effect on the yields of aliphatic hydrocarbons. The yields of the analytes were much higher using microwave assisted nonionic surfactant extraction than with Soxhlet extraction. The recoveries of the n-alkanes and acyclic isoprenoid hydrocarbons for GC-MS analysis from the extractant nonionic surfactant solution by in-tube extraction (ITEX 2) with a TENAX TA adsorbent were found to be efficient. The results show that microwave-assisted nonionic surfactant extraction (MANSE) is a good and efficient green analytical preparatory technique for geochemical evaluation of petroleum source rock. Copyright © 2011 Elsevier B.V. All rights reserved.

  4. Factors controlling leaching of polycyclic aromatic hydrocarbons from petroleum source rock using nonionic surfactant

    Energy Technology Data Exchange (ETDEWEB)

    Akinlua, Akinsehinwa [Obafemi Awolowo Univ., Ile-Ife (Nigeria). Fossil Fuels and Environmental Geochemistry Group; Jochmann, Maik A.; Qian, Yuan; Schmidt, Torsten C. [Duisburg-Essen Univ., Essen (Germany). Instrumental Analytical Chemistry; Sulkowski, Martin [Duisburg-Essen Univ., Essen (Germany). Inst. of Environmental Analytical Chemistry

    2012-03-15

    The extraction of polycyclic aromatic hydrocarbons (PAHs) from petroleum source rock by nonionic surfactants with the assistance of microwave irradiation was investigated and the conditions for maximum yield were determined. The results showed that the extraction temperatures and type of surfactant have significant effects on extraction yields of PAHs. Factors such as surfactant concentration, irradiation power, sample/solvent ratio and mixing surfactants (i.e., mixture of surfactant at specific ratio) also influence the extraction efficiencies for these compounds. The optimum temperature for microwave-assisted nonionic surfactant extraction of PAHs from petroleum source rock was 120 C and the best suited surfactant was Brij 35. The new method showed extraction efficiencies comparable to those afforded by the Soxhlet extraction method, but a reduction of the extraction times and environmentally friendliness of the new nonionic surfactant extraction system are clear advantages. The results also show that microwave-assisted nonionic surfactant extraction is a good and efficient green analytical preparatory technique for geochemical evaluation of petroleum source rock. (orig.)

  5. Refolding of SDS-Unfolded Proteins by Nonionic Surfactants.

    Science.gov (United States)

    Kaspersen, Jørn Døvling; Søndergaard, Anne; Madsen, Daniel Jhaf; Otzen, Daniel E; Pedersen, Jan Skov

    2017-04-25

    The strong and usually denaturing interaction between anionic surfactants (AS) and proteins/enzymes has both benefits and drawbacks: for example, it is put to good use in electrophoretic mass determinations but limits enzyme efficiency in detergent formulations. Therefore, studies of the interactions between proteins and AS as well as nonionic surfactants (NIS) are of both basic and applied relevance. The AS sodium dodecyl sulfate (SDS) denatures and unfolds globular proteins under most conditions. In contrast, NIS such as octaethylene glycol monododecyl ether (C 12 E 8 ) and dodecyl maltoside (DDM) protect bovine serum albumin (BSA) from unfolding in SDS. Membrane proteins denatured in SDS can also be refolded by addition of NIS. Here, we investigate whether globular proteins unfolded by SDS can be refolded upon addition of C 12 E 8 and DDM. Four proteins, BSA, α-lactalbumin (αLA), lysozyme, and β-lactoglobulin (βLG), were studied by small-angle x-ray scattering and both near- and far-UV circular dichroism. All proteins and their complexes with SDS were attempted to be refolded by the addition of C 12 E 8 , while DDM was additionally added to SDS-denatured αLA and βLG. Except for αLA, the proteins did not interact with NIS alone. For all proteins, the addition of NIS to the protein-SDS samples resulted in extraction of the SDS from the protein-SDS complexes and refolding of βLG, BSA, and lysozyme, while αLA changed to its NIS-bound state instead of the native state. We conclude that NIS competes with globular proteins for association with SDS, making it possible to release and refold SDS-denatured proteins by adding sufficient amounts of NIS, unless the protein also interacts with NIS alone. Copyright © 2017 Biophysical Society. Published by Elsevier Inc. All rights reserved.

  6. Influence of nonionic surfactants on the potentiometric response of hydrogen ion-selective polymeric membrane electrodes.

    Science.gov (United States)

    Espadas-Torre, C; Bakker, E; Barker, S; Meyerhoff, M E

    1996-05-01

    The influence of poly(ethylene oxide)-based nonionic surfactants (i.e., Triton X-100 and Brij 35) in the sample phase on the response properties of hydrogen ion-selective polymeric membrane electrodes containing mobile (lipophilic amines) or covalently bound (aminated-poly-(vinyl chloride)) hydrogen ion carriers is reported. In the presence of these nonionic surfactants, membrane electrode response toward interfering cation activity (e.g., Na+) in the sample phase is increased substantially and the pH measuring range shortened. The degree of cation interference for pH measurements is shown to correlate with the basicity of the hydrogen ion carrier doped within the membrane phase. The observed deterioration in selectivity arises from the partitioning of the surfactant into the membrane and concomitant extraction of metal cations by the surfactants in the organic phase. The effect of nonionic surfactants on pH electrodes prepared with aminated-PVC membranes is shown to be more complex, with additional large shifts in EMF values apparently arising from multidentate interactions between the surfactant molecules and the polymeric amine in the membrane, leading to a change in the apparent pKa values for the amine sites. The effects induced by nonionic surfactants on the EMF response function of hydrogen ion-selective polymeric membrane electrodes are modeled, and experimental results are shown to correlate well with theoretical predictions.

  7. A conductometric investigation of hydroxypropylmethyl cellulose/sodium dodecyl sulfate/nonionic surfactant systems

    Directory of Open Access Journals (Sweden)

    Petrović Lidija B.

    2014-01-01

    Full Text Available Surfactant mixtures are very often used in various cosmetic and pharmaceutical products because they commonly act in synergism and provide more favorable properties than the single surfactants. At the same time, the 9 presence of polymers in mixtures of surfactants may lead to molecular interactions thereby affecting product stability and activity. For these reasons it is very important to determine the surfactant interactions influence on 1micellization and mixed micellization, as well as polymer-surfactants mixed micelles interactions. In this work we examined self-aggregation of nonionic surfactants, polysorbate 20 (Tween 20, polyoxyethylene octylphenyl ether (Triton X100 and polyoxyethylene-polyoxypropylene block copolymer (Pluronic F68 with ionic surfactant, sodium dodecylsulfate, in aqueous solution at 40ºC using conductometric titration method. It was found that concentration region for mixed micelle formation depends on nonionic surfactant characteristics and its concentration. Formation of surfactants mixed micelles in the presence of nonionic polymer, hydroxypropylmethyl cellulose, and their binding to polymer hydrophobic sites, were investigated too. Analysis of obtained results points to different kinds of interactions in investigated systems, which are crucial for their application. [Projekat Ministarstva nauke Republike Srbije, br. III 46010

  8. Solubilization of sulfur compounds in the crude oil by nonionic surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Suk Kyu; Han, Ji Won; Park, Sang Kwon; Lo, Jong Choo [Department of Chemical Engineering, Dongguk University, Seoul (Korea); Kim, Byung Hong; Shin, Pyung Gyun [Korea Institute of Science and Technology (Korea)

    2000-04-01

    In this study, polyoxyethylene(POE) nonionic surfactants were used in order ro enhance the solubilization of sulfur compounds contained in the crude oil and the solubilized sulfur contents in the aqueous surfactant solutions were measured by X-ray sulfur spectrometer. The most hydrophobic surfactant among used during this study showed the maximum solubilization capacity for the sulfur compounds in the crude oil and the solubilization of sulfur compounds was found to be increased with temperature and to be abruptly increased at above 1 wt % surfactant solutions. It was found that Tergitol series surfactants showed higher solubilizing capacity than Neodol series surfactants presumably due to the disruption of the regular packing in the hydrocarbon region of the surfactant aggregates. The addition of a cosurfactant such as alcohol and/or an electrolyte increased the solubilization of sulfur compound in the crude oil. It was found that preheating phenomena were shown to be significant with an hydrophobic surfactant at high temperature and the growth of sulfur reducing microorganisms was not greatly affected by the addition of nonionic surfactants. 21 ref s.,11 fig., 2 tabs.

  9. Interaction between cholesterol and non-ionic surfactants studied by thin-layer chromatography

    Czech Academy of Sciences Publication Activity Database

    Forgács, E.; Cserháti, T.; Farkas, O.; Eckhardt, Adam; Mikšík, Ivan; Deyl, Zdeněk

    2004-01-01

    Roč. 27, č. 13 (2004), s. 1981-1992 ISSN 1082-6076 Grant - others:CZ-HU(CZ) Cooperation program Institutional research plan: CEZ:AV0Z5011922 Keywords : cholesterol * non-ionic surfactant * thin - layer chromatography Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 0.836, year: 2004

  10. Preparation of Organized Mesoporous Silica from Sodium Metasilicate Solutions in Alkaline Medium using Nonionic Surfactants

    Czech Academy of Sciences Publication Activity Database

    Zukalová, Markéta; Rathouský, Jiří; Zukal, Arnošt

    2003-01-01

    Roč. 68, č. 10 (2003), s. 2019-2031 ISSN 0010-0765 Institutional research plan: CEZ:AV0Z4040901 Keywords : mesoporous SiO2 * sodium metasilicate * nonionic surfactants Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 1.041, year: 2003

  11. Effects of non-ionic surfactants on the interactions between cellulases and tannic acid

    DEFF Research Database (Denmark)

    Olsen, Søren Nymand; Bohlin, Christina Helena; Murphy, Leigh

    2011-01-01

    Addition of non-ionic surfactants (NIS) is known to accelerate enzymatic lignocellulose hydrolysis. The mechanism behind this accelerating effect is still not elucidated but has been hypothesized to originate from favorable NIS–lignin interactions which alleviate non-productive adsorption...

  12. Simple determination of nonionic surfactants in highly-polluted aqueous samples

    Czech Academy of Sciences Publication Activity Database

    Šváb, M.; Švábová, Martina; Mečířová, P.

    2011-01-01

    Roč. 9, č. 6 (2011), s. 1150-1157 ISSN 1895-1066 Institutional research plan: CEZ:AV0Z30460519 Keywords : nonionic surfactant * soil leachate * spectrophotometric determination Subject RIV: DD - Geochemistry Impact factor: 1.073, year: 2011 http://www.springerlink.com/content/k6401t0237878488/

  13. Shedding light on the different behavior of ionic and nonionic surfactants in emulsion polymerization: from atomistic simulations to experimental observations.

    Science.gov (United States)

    Magi Meconi, Giulia; Ballard, Nicholas; Asua, José M; Zangi, Ronen

    2017-12-06

    Although surfactants are known to play a vital role in polymerization reactions carried out in dispersed media, many aspects of their use are poorly understood, perhaps none more so than the vastly different action of ionic and nonionic surfactants in emulsion polymerization. In this work, we combine experimental measurements of emulsion polymerization of styrene with atomistic molecular dynamics simulations to better understand the behavior of surfactants at monomer/polymer-water interfaces. In a batch emulsion polymerization of styrene, the nonionic surfactant Disponil AFX 1080 leads to two nucleation periods, in contrast to the behavior observed for the ionic surfactant SDS. This can be explained by the absorption of the nonionic surfactant into the organic phase at the early stages of the polymerization reaction which is then released as the reaction progresses. Indeed, we find that the partition coefficient of the surfactant between the organic phase and water increases with the amount of monomer in the former, and preferential partitioning is detected to organic phases containing at least 55% styrene. Results from molecular dynamics simulations confirm that spontaneous dissolution of the non-ionic surfactant into a styrene-rich organic phase occurs above a critical concentration of the surfactant adsorbed at the interface. Above this critical concentration, a linear correlation between the amount of surfactant adsorbed at the interface and that absorbed inside the organic phase is observed. To facilitate this absorption into a completely hydrophobic medium, water molecules accompany the intruding surfactants. Similar simulations but with the ionic surfactant instead did not result in any absorption of the surfactant into a neat styrene phase, likely because of its strongly hydrophilic head group. The unusual partitioning behavior of nonionic surfactants explains a number of observable features of emulsion polymerization reactions which use nonionic

  14. Nonionic surfactant Brij35 effects on toluene biodegradation in a ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-10-19

    Oct 19, 2009 ... behaviors of toluene in a composite bead biofilter were investigated. The toluene dissolved in the water phase was enhanced by the addition of surfactant into aqueous solution and the enhancing effect was more pronounced in the surfactant concentration less than critical micelle concentration. For the.

  15. Tools to discover anionic and nonionic polyfluorinated alkyl surfactants by liquid chromatography electrospray ionisation mass spectrometry

    DEFF Research Database (Denmark)

    Trier, Xenia; Granby, Kit; Christensen, Jan H.

    2011-01-01

    A tiered approach is proposed for the discovery of unknown anionic and nonionic polyfluorinated alkyl surfactants (PFASs) by reversed phase ultra high performance liquid chromatography (UHPLC) – negative electrospray ionisation – quadrupole time of flight mass spectrometry (UHPLC–ESI−–QTOF–MS). T......A tiered approach is proposed for the discovery of unknown anionic and nonionic polyfluorinated alkyl surfactants (PFASs) by reversed phase ultra high performance liquid chromatography (UHPLC) – negative electrospray ionisation – quadrupole time of flight mass spectrometry (UHPLC...... such as [M−H+solvent]− and [(M−H)(M−H+Na)n]− were used to confirm the identity of the precursor ions. In relation to quantification of PFASs, we discuss how their surfactancy influence the ESI processes, challenge their handling in solution and choices of precursor-to-product ions for MSMS of e...

  16. Metformin Loaded Non-ionic Surfactant Vesicles: Optimization of Formulation, Effect of Process variables and Characterization

    Directory of Open Access Journals (Sweden)

    Pravin K Pawar

    2013-01-01

    Full Text Available Metformin an oral hypoglycemic has been widely used as a fist line of treatment of Type II Diabetes but in a very high dose 2–3 times a day and moreover suffers from a number of side effects like lactic acidosis, gastric discomfort, chest pain, allergic reactions being some of them. The present work was conducted with the aim of sustaining the release of metformin so as to decrease its side effects and also reduce its dosing frequency using a novel deliverysystem niosomes (non-ionic surfactant vesicles. Non-ionic surfactant vesicles of different surfactants were prepared using thin film hydration technique and were investigated for morphology, entrapment, in-vitro release, TEM (transmission electron microscopy andphysical stability. Optimized formulation was further studied for the effect of Surfactant concentration, DCP (Dicetyl phosphate, Surfactant: cholesterol ratio and volume ofhydration. The release studies data was subjected to release kinetics models. Results The prepared vesicles were uniform and spherical in size. Optimized formulation MN3 entrapped the drug with 84.50±0.184 efficiency in the vesicles of the size 487.60±2.646 andshowed the most sustained release of 73.89±0.126. Also it was resulted that 100 molar concentration of cholesterol and surfactant, Presence of DCP, equimolar ratio of span60: cholesterol and 15 ml of volume of hydration were found to be optimum for miosome preparation.

  17. Adsorption of nonionic surfactant on silica nanoparticles: structure and resultant interparticle interactions.

    Science.gov (United States)

    Sharma, Kamendra P; Aswal, Vinod K; Kumaraswamy, Guruswamy

    2010-09-02

    Addition of nonionic surfactant, C(12)E(9), to an aqueous dispersion of charge stabilized silica nanoparticles renders particle aggregation reversible. In contrast, aggregation of the same silica particles in aqueous solutions is irreversible. We use a combination of small-angle X-ray scattering (SAXS) and contrast matching small-angle neutron scattering (SANS) to investigate interparticle interactions and microstructure in dispersions of silica particles in aqueous nonionic surfactant solutions. We show that the silica particles interact through a screened Coulombic interaction in aqueous dispersions; interestingly, this interparticle interaction is hard-sphere-like in surfactant solutions. In surfactant solutions, we show that the final surfactant-particle structure can be modeled as 14 micelles adsorbed (on average) on the surface of each silica particle. This gives rise to the short-range interparticle repulsion that makes particle aggregation reversible, and results in the hard sphere interparticle interaction potential. Finally, we show that adsorption of polyethylene imine on the surface of the silica particles prevents adsorption of surfactant micelles on the particle surface.

  18. New theoretical framework for designing nonionic surfactant mixtures that exhibit a desired adsorption kinetics behavior.

    Science.gov (United States)

    Moorkanikkara, Srinivas Nageswaran; Blankschtein, Daniel

    2010-12-21

    How does one design a surfactant mixture using a set of available surfactants such that it exhibits a desired adsorption kinetics behavior? The traditional approach used to address this design problem involves conducting trial-and-error experiments with specific surfactant mixtures. This approach is typically time-consuming and resource-intensive and becomes increasingly challenging when the number of surfactants that can be mixed increases. In this article, we propose a new theoretical framework to identify a surfactant mixture that most closely meets a desired adsorption kinetics behavior. Specifically, the new theoretical framework involves (a) formulating the surfactant mixture design problem as an optimization problem using an adsorption kinetics model and (b) solving the optimization problem using a commercial optimization package. The proposed framework aims to identify the surfactant mixture that most closely satisfies the desired adsorption kinetics behavior subject to the predictive capabilities of the chosen adsorption kinetics model. Experiments can then be conducted at the identified surfactant mixture condition to validate the predictions. We demonstrate the reliability and effectiveness of the proposed theoretical framework through a realistic case study by identifying a nonionic surfactant mixture consisting of up to four alkyl poly(ethylene oxide) surfactants (C(10)E(4), C(12)E(5), C(12)E(6), and C(10)E(8)) such that it most closely exhibits a desired dynamic surface tension (DST) profile. Specifically, we use the Mulqueen-Stebe-Blankschtein (MSB) adsorption kinetics model (Mulqueen, M.; Stebe, K. J.; Blankschtein, D. Langmuir 2001, 17, 5196-5207) to formulate the optimization problem as well as the SNOPT commercial optimization solver to identify a surfactant mixture consisting of these four surfactants that most closely exhibits the desired DST profile. Finally, we compare the experimental DST profile measured at the surfactant mixture condition

  19. Small-angle neutron scattering studies of nonionic surfactant: Effect ...

    Indian Academy of Sciences (India)

    celle above a concentration called critical micelle concentration (CMC) where their properties are different from those of the ... It is well-known that SANS is an ideal technique to study the micellar structure of surfactants [8,9] and this has also ... ment at the Dhruva reactor, Mumbai [11]. The mean wavelength of the incident.

  20. The influence of nonionic surfactant Brij 30 on biodegradation of ...

    African Journals Online (AJOL)

    Zero-order kinetics with diffusion limitation was regarded as the most adequate biochemical reaction kinetic model. The microbial growth rate and biochemical reaction rate were inhibited at higher surfactant content and toluene inlet concentration. The degree of inhibitive effect was more pronounced at lower toluene inlet ...

  1. Packing states of multilamellar vesicles in a nonionic surfactant system

    DEFF Research Database (Denmark)

    Le, T.D.; Olsson, U.; Mortensen, K.

    2001-01-01

    under shear. Here, we focused only in the MLV region, L-alpha(*), of a temperature sensitive surfactant system (C12E4-water) to investigate the packing of multilamellar vesicles as a function of temperature under constant shear. Two sets of temperature scan experiments were performed in the L...

  2. Competitive adsorption of monoclonal antibodies and nonionic surfactants at solid hydrophobic surfaces

    DEFF Research Database (Denmark)

    Kapp, Sebastian J; Larsson, Iben; van de Weert, Marco

    2015-01-01

    , such as infusion bags and i.v. lines. Total internal reflection fluorescence and quartz crystal microbalance with dissipation monitoring were used to follow and quantify this. Furthermore, the influence of the nonionic surfactant polysorbate 80 (PS80) on the adsorption process of these two antibodies...... was investigated. Despite belonging to two different IgG subclasses, both antibodies displayed comparable adsorption behavior. Both antibodies readily adsorbed in the absence of PS80, whereas adsorption was reduced in the presence of 30 mg/L surfactant. The sequence of exposure of the surfactant and protein...... to the surface was found to have a major influence on the extent of protein adsorption. Although only a fraction of adsorbed protein could be removed by rinsing with 30 mg/L surfactant solution, adsorption was entirely prevented when surfaces were pre-exposed to PS80. © 2014 Wiley Periodicals, Inc...

  3. Mobilization of arsenic from contaminated sediment by anionic and nonionic surfactants.

    Science.gov (United States)

    Liang, Chuan; Peng, Xianjia

    2017-06-01

    The increasing manufacture of surfactants and their wide application in industry, agriculture and household detergents have resulted in large amounts of surfactant residuals being discharged into water and distributed into sediment. Surfactants have the potential to enhance arsenic mobility, leading to risks to the environment and even human beings. In this study, batch and column experiments were conducted to investigate arsenic mobilization from contaminated sediment by the commercial anionic surfactants sodium dodecylbenzenesulfonate (SDBS), sodium dodecyl sulfate (SDS), sodium laureth sulfate (AES) and nonionic surfactants phenyl-polyethylene glycol (Triton X-100) and polyethylene glycol sorbitan monooleate (Tween-80). The ability of surfactants to mobilize arsenic followed the order AES>SDBS>SDS≈Triton X-100>Tween 80. Arsenic mobilization by AES and Triton X-100 increased greatly with the increase of surfactant concentration and pH, while arsenic release by SDBS, SDS and Tween-80 slightly increased. The divalent ion Ca 2+ caused greater reduction of arsenic mobilization than Na + . Sequential extraction experiments showed that the main fraction of arsenic mobilized was the specifically adsorbed fraction. Solid phase extraction showed that arsenate (As(V)) was the main species mobilized by surfactants, accounting for 65.05%-77.68% of the total mobilized arsenic. The mobilization of arsenic was positively correlated with the mobilization of iron species. The main fraction of mobilized arsenic was the dissolved fraction, accounting for 70% of total mobilized arsenic. Copyright © 2016. Published by Elsevier B.V.

  4. The effect of nonionic surfactants on emulsion polymerization of poly(methacrylic acid) nanoparticles

    Science.gov (United States)

    Harun, Noor Aniza; Kassim, Syara; Muhammad, Siti Thohirah; Rohi, Farah Eliani; Norzam, Nor Nabihah; Tahier, Nur Shahira Mat

    2017-09-01

    Poly(methacrylic acid) (PMAA) nanoparticles were successfully synthesized via emulsion polymerization techniques, a robust and convenient method to produce polymer nanoparticles. PMAA nanoparticles were prepared utilizing different nonionic surfactants at various concentrations and potassium persulfate (KPS) as water soluble initiator. The effects of different nonionic surfactants towards the particle size, stability and morphology of PMAA nanoparticles were thoroughly discussed. The formation of PMAA nanoparticles have been confirmed by using Fourier transform infrared (FTIR) spectroscopy. Thermogravimetric analyzer (TGA) was used to measure the changes in physical and chemical properties of PMAA nanoparticles as a function of increasing temperature. The particles sizes and morphology of PMAA nanoparticles were investigated using scanning electron microscope (SEM). It is speculated that the invention of hydrophilic polymer nanoparticles could bring a new path towards the development of "green" polymeric nanoparticles which are more compatible and can easily be degraded especially for future sustainable.

  5. Effect of a non-ionic surfactant on biodegradation of slowly desorbing PAHs in contaminated soils

    OpenAIRE

    Bueno Montes, M.; Springael, D.; Ortega Calvo, J. J.

    2011-01-01

    The influence of the nonionic surfactant Brij 35 on biodegradation of slowly desorbing polycyclic aromatic hydrocarbons (PAHs) was determined in contaminated soils. We employed a soil originated from a creosote-polluted site, and a manufactured gas plant soil that had been treated by bioremediation. The two soils differed in their total content in five indicator 3-, 4-, and 5-ring PAHs (2923 mg kg(-1) and 183 mg kg(-1) in the creosote-polluted and bioremediated soils, respectively) but had a ...

  6. Phase Behaviour Study of Swiftlet Nest Using Virgin Coconut Oil with Non-Ionic Surfactants

    International Nuclear Information System (INIS)

    Siti Salwa Abd Gani; Siti Zulaika Adisah; Siti Salwa Abd Gani

    2015-01-01

    Virgin coconut oil (VCO) is the oil that obtained from fresh and mature kernel of the coconut by mechanical or natural means with or without the application of heat, which does not lead to alteration of the nature of the oil. It have advantages such as strengthens the immune system because of its lauric acid content. It also has medium-chain fatty acids which heighten metabolism and energy, thus stimulating the thyroid. Swiftlet nest as an active ingredient need to be dispersed in a carrier system. Thus, ternary phase diagrams were constructed to find the suitable and stable system for it. The phase behavior of systems has been investigated by constructing ternary phase diagrams consisting of non-ionic surfactants/VCO:bird nest/water. The surfactants used were Sorbitan tri-oleate (Span 85), Sorbitan mono-oleate (Span 80), Sorbitan monolaurate (Span 20), Polyoxyethylene(20) sorbitan tri-oleate (Tween 85) and Polyoxyethylene (20) sorbitan mono-oleate (Tween 80). These systems include several phase regions such as homogeneous, isotropic, two-phase and three-phase regions. Different hydrophilic lipophilic balance (HLB) value of non-ionic surfactants exhibit different ternary diagram characteristics. A lower HLB shows a more oil-soluble and a more water-soluble surfactant (larger homogeneous and isotropic region in ternary phase diagrams) whereas high value of HLB shows the reverse of that result. The results show that the T85/VCO:bird nest/water system gave better performance than the other four individual surfactant systems. As a conclusion, high hydrophilic lipophilic balance (HLB) values of surfactant were found to be a good surfactant for the formulation of VCO:bird nest emulsion for cosmetic and pharmaceutical purposes. (author)

  7. Physico-chemical study of new non-ionic surfactants. Influence of ions on aggregation properties

    International Nuclear Information System (INIS)

    Coulombeau, H.

    2003-01-01

    New di-block thermo-sensitive metal chelating surfactants have been synthesised. They are based on polyethoxylated non-ionic surfactants (CiEj). A lysine block is linked either to the extremity of a CiEj (surfactant 2) or in a branched position (surfactant 1). These molecules retain the cloud point and the surface-active properties exhibited by the CiEj surfactants. Moreover they possess good complexing properties towards certain ions, which allows them to be successfully applied to cloud point extraction. In both cases, the cloud point and the area per headgroup at the air-water interface are higher than those of the analogous CiEj, which shows the hydrophilic contribution of the lysine block. Macroscopic properties (phase diagrams) and microscopic properties (shape of the aggregates and interactions between them) of the water-surfactant systems have been studied at ambient temperature. Small angle X-Rays scattering (SAXS) and small angle neutrons scattering (SANS) have shown that the new di-block surfactants form spherical micelles at low concentrations. The influence of non complexed salts on the new surfactants is the same as on classical CiEj: salting-in and salting-out phenomena occur according to the Hofmeister series. The effect of a complexed ion, uranyl cation, is however unusual: it leads to a sphere to rod transition, in turn lowering significantly the cloud point, which goes against the expectations on basis of the Hofmeister series. Finally, a preliminary study of ternary mixtures, water-surfactant 1-oil, is presented. It revealed the formation of microemulsions and pointed out that the surfactant film is then a lot more rigid than that formed with classical CiEj. (author)

  8. Biotoxicity and bioavailability of hydrophobic organic compounds solubilized in nonionic surfactant micelle phase and cloud point system.

    Science.gov (United States)

    Pan, Tao; Liu, Chunyan; Zeng, Xinying; Xin, Qiao; Xu, Meiying; Deng, Yangwu; Dong, Wei

    2017-06-01

    A recent work has shown that hydrophobic organic compounds solubilized in the micelle phase of some nonionic surfactants present substrate toxicity to microorganisms with increasing bioavailability. However, in cloud point systems, biotoxicity is prevented, because the compounds are solubilized into a coacervate phase, thereby leaving a fraction of compounds with cells in a dilute phase. This study extends the understanding of the relationship between substrate toxicity and bioavailability of hydrophobic organic compounds solubilized in nonionic surfactant micelle phase and cloud point system. Biotoxicity experiments were conducted with naphthalene and phenanthrene in the presence of mixed nonionic surfactants Brij30 and TMN-3, which formed a micelle phase or cloud point system at different concentrations. Saccharomyces cerevisiae, unable to degrade these compounds, was used for the biotoxicity experiments. Glucose in the cloud point system was consumed faster than in the nonionic surfactant micelle phase, indicating that the solubilized compounds had increased toxicity to cells in the nonionic surfactant micelle phase. The results were verified by subsequent biodegradation experiments. The compounds were degraded faster by PAH-degrading bacterium in the cloud point system than in the micelle phase. All these results showed that biotoxicity of the hydrophobic organic compounds increases with bioavailability in the surfactant micelle phase but remains at a low level in the cloud point system. These results provide a guideline for the application of cloud point systems as novel media for microbial transformation or biodegradation.

  9. Ordered silica particles made by nonionic surfactant for VOCs sorption

    Energy Technology Data Exchange (ETDEWEB)

    Difallah, Oumaima; Hamaizi, Hadj, E-mail: hamaizimizou@yahoo.fr [University of Oran, OranMenaouer (Algeria); Amate, Maria Dolores Urena; Socias-Viciana, Maria Del Mar [University of Almeria (Spain)

    2017-07-15

    Adsorption of light organic compounds such acetone, 1-propanol and carbon dioxide was tested by using mesoporous silica materials made from non ionic surfactant with long chain and silica sources as tetraethyl orthosilicate TEOS and modified Na-X and Li-A Zeolites. X-ray powder diffraction (XRD), nitrogen adsorption-desorption analysis and scanning electron microscopy (SEM) were applied to characterize the silica particles of a variety prepared samples. Acetone, 1-propanol and CO{sub 2} adsorption at 298K was evaluated by a volumetric method and indicate a high sorption capacity of organic compounds depending essentially on the porous texture of adsorbents. An adsorption kinetic model was proposed to describe the adsorption of VOCs over template-free mesoporous silica materials. A good agreement with experimental data was found. (author)

  10. Synthesis, surface properties and antimicrobial activity of some germanium nonionic surfactants.

    Science.gov (United States)

    Zaki, Mohamed F; Tawfik, Salah M

    2014-01-01

    Esterification reaction between different fatty acid namely; lauric, stearic, oleic and linoleic acids and polyethylene glycol-400 were performed. The produced polyethylene glycol ester were reacted with p-amine benzoic acid followed by condensation reaction with germanium dioxide in presence of sodium carbonate to form desired germinate surfactants. The chemical structures of the synthesized surfactants were determined using different spectra tools. The surface parameter including: the critical micelle concentration (CMC), effectiveness (π(cmc)), efficiency (Pc20), maximum surface excess (Γ(max)) and minimum surface area (A(min)), were calculated from the surface tension measurements. The synthesized surfactants showed higher surface activity. The thermodynamic parameters showed that adsorption and micellization processes are spontaneous. It is clear that the synthesized nonionic surfactants showed their tendency towards adsorption at the interfaces and also micellization in the bulk of their solutions. The synthesized surfactants were tested against different strain of bacteria using inhibition zone diameters. The synthesized surfactants showed good antimicrobial activities against the tested microorganisms including Gram positive, Gram negative as well as fungi. The promising inhibition efficiency of these compounds against the sulfate reducing bacteria facilitates them to be applicable as new categories of sulfate reducing bacteria biocides.

  11. Interfacial aggregation of a nonionic surfactant: Effect on the stability of silica suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Giordano-Palmino, F.; Denoyel, R.; Rouquerol, J. (CNRS, Marseille (France). Centre de thermodynamique et Microcalorimetrie)

    1994-06-01

    Nonionic surfactants are in widespread use in technological applications such as flotation, detergency, suspension stabilization (paints, ceramic preparation, pharmaceuticals, cosmetics), and enhanced oil recovery. The adsorption of the nonionic surfactant TX 100 in two silica suspensions (Ludox HS40 and Syton W30) has been studied with the aim of relating the structure of the adsorbed layer to the stability of the suspension. First, a thermodynamic study based on the determination of adsorption isotherms and displacement enthalpies as a function of pH and solid/liquid ratio was carried out and lead to the conclusion that such a surfactant forms micelle-like aggregates on the silica surface. Then, a stability study based on visual observation, turbidimetry, and particle size determination (by photon correlation spectroscopy) was performed in order to determine the TX 100 concentration range in which flocculation occurs. Considering that the surface is covered with micelle-like aggregates in the flocculation range and that the [zeta]-potential (determined by microelectrophoresis) has varied only slightly at the onset of flocculation, it is concluded that the flocculation mechanism is a bridging of particles by surface micelles. This bridging of particles by aggregates similar in size and shape could be an explanation of the presence, in such systems, of optimum flocculation at half surface coverage.

  12. Effect of a nonionic surfactant on biodegradation of slowly desorbing PAHs in contaminated soils.

    Science.gov (United States)

    Bueno-Montes, Marisa; Springael, Dirk; Ortega-Calvo, José-Julio

    2011-04-01

    The influence of the nonionic surfactant Brij 35 on biodegradation of slowly desorbing polycyclic aromatic hydrocarbons (PAHs) was determined in contaminated soils. We employed a soil originated from a creosote-polluted site, and a manufactured gas plant soil that had been treated by bioremediation. The two soils differed in their total content in five indicator 3-, 4-, and 5-ring PAHs (2923 mg kg(-1) and 183 mg kg(-1) in the creosote-polluted and bioremediated soils, respectively) but had a similar content (140 mg kg(-1) vs 156 mg kg(-1)) of slowly desorbing PAHs. The PAHs present in the bioremediated soil were highly recalcitrant. The surfactant at a concentration above its critical micelle concentration enhanced the biodegradation of slowly desorbing PAHs in suspensions of both soils, but it was especially efficient with bioremediated soil, causing a 62% loss of the total PAH content. An inhibition of biodegradation was observed with the high-molecular-weight PAHs pyrene and benzo[a]pyrene in the untreated soil, possibly due to competition effects with other solubilized PAHs present at relatively high concentrations. We suggest that nonionic surfactants may improve bioremediation performance with soils that have previously undergone extensive bioremediation to enrich for a slowly desorbing profile.

  13. Effect of nonionic surfactant Brij 35 on the fate and transport of oxytetracycline antibiotic in soil.

    Science.gov (United States)

    Elsayed, Eman M; Prasher, Shiv O; Patel, Ramanbhai M

    2013-02-15

    In many parts of the world, river water is used for irrigation. Treated, partially treated, and even untreated water from wastewater treatment plants is discharged directly into rivers, thereby degrading the quality of the water. Consequently, irrigation water may contain surfactants which may affect the fate and transport of chemicals such as pesticides and antibiotics in agricultural soils. A field lysimeter study was undertaken to investigate the effect of the nonionic surfactant, Brij 35, on the fate and transport of an antibiotic, Oxytetracycline, commonly used in cattle farms. Nine PVC lysimeters, 1.0 m long × 0.45 m diameter, were packed with a sandy soil to a bulk density of 1.35 Mg m(-3). Cattle manure, containing Oxytetracycline, was applied at the surface of the lysimeters at the recommended rate of 10 t/ha. Each of three aqueous Brij 35 solutions, 0, 0.5 and 5 g L(-1) (i.e., 'good,' 'poor' and 'very poor' quality irrigation water) were each applied to the lysimeters in triplicate. Over a 90 day period, soil and leachate samples were collected and analyzed. Batch experiment results showed that the presence of the nonionic surfactant Brij 35 significantly reduced the sorption coefficient of OTC from 23.55 mL g(-1) in the aqueous medium to 19.49, 12.49 and 14.53 in the presence of Brij 35 at concentrations of 0.25, 2.5 and 5 g L(-1), respectively. Lysimeter results indicted the significant downward movement of OTC at depths of 60 cm into soil profile and leachate in the presence of surfactant. Thus, the reuse of wastewater containing surfactants might enhance the mobility of contaminants and increase ground water pollution. Copyright © 2012 Elsevier Ltd. All rights reserved.

  14. Polycyclic aromatic hydrocarbon behavior in bioactive soil slurry reactors amended with a nonionic surfactant.

    Science.gov (United States)

    Kim, Han S; Weber, Walter J

    2005-02-01

    The effects of an ethoxylated sorbitan fatty ester nonionic surfactant (Tween 80) on the bioavailability of polycyclic aromatic hydrocarbons (PAHs) were examined by using soil-free and dense-slurry (67% solids content, by wt) systems containing a creosote-contaminated field soil. The dispersed-micelle-phase PAHs in soil-free systems were not readily bioavailable to the mixed consortium of microbes indigenous to the creosote-contaminated soil. Instead, the microbes partially and preferentially utilized readily available portions of the surfactant as carbon sources (16-18% of the initial surfactant dose). This selective microbial attack resulted in destabilization of dispersed-phase micelles and significant decreases in molar solubilization ratio and micelle-water partition coefficient values. Remarkably high dosages (>20 g/L) of Tween 80 were required to enhance mobilization of the sorbed PAHs via micelle association because of the sorption of Tween 80 to the soil employed. The PAHs released from the destabilized micelles in soil-slurry systems either associated with sorbed-phase surfactants or readsorbed to soil organic matter too rapidly to be biologically accessed, even by the acclimated PAH-degrading microbes present. The work provides important new information and practical insights to surfactant solubilization and mobilization technology applications for the bioremediation of PAH-contaminated soils and sediments.

  15. Synthesis of mesoporous aluminophosphate and silicoaluminophosphate in the presence of nonionic poly(ethylene oxide) surfactant

    International Nuclear Information System (INIS)

    Zhao, G.L.; Zhang, X.J.; Chen, T.H.; Yuan, Z.Y.

    2006-01-01

    Thermally stable mesoporous aluminophosphate and silicoaluminophosphate materials have been synthesized by using nonionic PEO-surfactant C 16 H 33 (PEO) 10 OH as a structure-directing agent. The synthesized aluminophosphate and silicoaluminophosphate possess disordered wormhole-like mesostructures with pore sizes of 3.8 and 5 nm, respectively. BET surface areas of 376-412 m 2 /g are obtained. Both four- and six-coordinate Al and tetrahedrally coordinated P were observed. It is believed that these materials may find potential applications in the fields of catalysis and material sciences

  16. Universal Janus Filters for the Rapid Separation of Oil from Emulsions Stabilized by Ionic or Nonionic Surfactants.

    Science.gov (United States)

    Wang, Zijie; Lehtinen, Morgan; Liu, Guojun

    2017-10-09

    Existing Janus filters cannot separate oil from emulsions stabilized by nonionic surfactants. Reported herein are universal Janus filters that separate oil from emulsions stabilized by not only ionic but also nonionic surfactants. To prepare such a filter, poly(dimethyl siloxane) (PDMS) is grafted onto one side of a fabric. The other side is then grafted with a copolymer polysoap bearing pendant oligo(ethylene glycol) monolaurate (EL) chains. Upon contact with an emulsion, the grafted polysoap competes with free surfactants, ionic or nonionic, for adsorption onto the emulsified droplets, drawing them to the surfaces of the fabric fibers, and causes them to coalesce locally. The coalesced oil then migrates to the PDMS-coated side of the fabric and selectively permeates it. These novel filters possess enhanced versatility and showcase a new application for polysoaps. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Biocompatible fluorinated polyglycerols for droplet microfluidics as an alternative to PEG-based copolymer surfactants.

    Science.gov (United States)

    Wagner, Olaf; Thiele, Julian; Weinhart, Marie; Mazutis, Linas; Weitz, David A; Huck, Wilhelm T S; Haag, Rainer

    2016-01-07

    In droplet-based microfluidics, non-ionic, high-molecular weight surfactants are required to stabilize droplet interfaces. One of the most common structures that imparts stability as well as biocompatibility to water-in-oil droplets is a triblock copolymer surfactant composed of perfluoropolyether (PFPE) and polyethylene glycol (PEG) blocks. However, the fast growing applications of microdroplets in biology would benefit from a larger choice of specialized surfactants. PEG as a hydrophilic moiety, however, is a very limited tool in surfactant modification as one can only vary the molecular weight and chain-end functionalization. In contrast, linear polyglycerol offers further side-chain functionalization to create custom-tailored, biocompatible droplet interfaces. Herein, we describe the synthesis and characterization of polyglycerol-based triblock surfactants with tailored side-chain composition, and exemplify their application in cell encapsulation and in vitro gene expression studies in droplet-based microfluidics.

  18. Desorption of hydrocarbon chains by association with ionic and nonionic surfactants under flow as a mechanism for enhanced oil recovery.

    Science.gov (United States)

    Terrón-Mejía, Ketzasmin A; López-Rendón, Roberto; Goicochea, Armando Gama

    2017-08-29

    The need to extract oil from wells where it is embedded on the surfaces of rocks has led to the development of new and improved enhanced oil recovery techniques. One of those is the injection of surfactants with water vapor, which promotes desorption of oil that can then be extracted using pumps, as the surfactants encapsulate the oil in foams. However, the mechanisms that lead to the optimal desorption of oil and the best type of surfactants to carry out desorption are not well known yet, which warrants the need to carry out basic research on this topic. In this work, we report non equilibrium dissipative particle dynamics simulations of model surfactants and oil molecules adsorbed on surfaces, with the purpose of studying the efficiency of the surfactants to desorb hydrocarbon chains, that are found adsorbed over flat surfaces. The model surfactants studied correspond to nonionic and cationic surfactants, and the hydrocarbon desorption is studied as a function of surfactant concentration under increasing Poiseuille flow. We obtain various hydrocarbon desorption isotherms for every model of surfactant proposed, under flow. Nonionic surfactants are found to be the most effective to desorb oil and the mechanisms that lead to this phenomenon are presented and discussed.

  19. Hydrate crystallization at oil-water interface, the effect of nonionic surfactants

    Science.gov (United States)

    Rosenfeld, Liat; Dann, Kevin; Rosenfeld Team

    2017-11-01

    Gas hydrates pose economic and environmental risks to the oil and gas industry when plug formation occurs in pipelines. A novel approach using interfacial rheology and visualization techniques was applied to understand cyclopentane clathrate hydrate formation in the presence of nonionic surfactant to achieve hydrate inhibition at low percent weight compared to thermodynamic inhibitors. The hydrate-inhibiting performance of various surfactants on a manually nucleated 2 μL droplet showed a morphological shift in crystallization from planar shell growth to conical growth. Monitoring the internal pressure of the water droplet undergoing hydrate crystallization provides information on the change of interfacial tension during crystallization process. At low surfactant concentrations, planar hydrate crystal was formed and decreasing interfacial tension was observed. At high surfactant concentration, crystal morphology was shifted to conical. Interfacial tension measurements reveal oscillations of interfacial tension during the crystallization process. The oscillatory behavior of the interfacial tension is a result of the growth and release of the hydrate cones from the surface of the droplet.

  20. Synthesis and characterization of dialkanolamides from castor oil (Ricinus communis) as nonionic surfactant

    Science.gov (United States)

    Anwar, M.; Wahyuningsih, T. D.

    2017-12-01

    Nonionic surfactant of dialkanolamide derivates was synthesized and characterized from castor oil (Ricinus comunnis). Ricinoleic acid was isolated from castor oil by hydrolysis in alkaline (KOH) condition at 65 °C. Oxidation of ricinoleic acid by dilute potassium permanganate (KMnO4) in alkaline condition at 75-90 °C gave dicarboxylic acid which was then reacted with ethanolamine at 140-160 °C for 6 hours. The product was recrystallized with isopropanol, and the structure elucidation was performed by FTIR, 1HNMR spectrometer, and GC-MS with silylation method. Characterization of surfactants was carried out by surface tension measurement (capillary rise method), Critical Micelle Concentration (CMC) based on turbidity method and calculation of Hydrophilic-Lipophilic Balance (HLB) value with Griffin method and Bancroft rule. The result showed that ricinoleic acid in castor oil is 86.19 % and it is oxidation give an azelaic acid and octanedioic acid in 53.25 %. Amidation of a dicarboxylic acid and ethanolamine at 140-160 °C for 6 hours yielded of N1,N9-bis(2-hydroxyethyl)nona diamide in 49.35 %. Surfactant characterization indicates that dialkanolamide derivates can be used as a surfactant due to its ability to reduce the surface tension of ethanol with CMC at 1.2 g/L, HLB value is 5.58 and can be used as emulsifier water in oil (W/O).

  1. Synergistic effect of non-ionic surfactants Tween 80 and PEG6000 on cytotoxicity of insecticides.

    Science.gov (United States)

    Li, Diqiu; Wu, Xiwei; Yu, Xiaoqin; Huang, Qingchun; Tao, Liming

    2015-03-01

    The use of surfactants in the development of a suitable formulation for insecticides should improve the solubility behavior, the permeability and the efficiency against pests meanwhile decrease the toxic risks of insecticides on human health. Cytotoxicity of insecticides including abamectin, chlorfluazuron, hexaflumuron, chlorpyrifos, and tebufenozide was assessed on human HepG2 and lepidopteran Tn5B1-4 cells utilizing insecticide alone and in combination with nontoxic concentrations of nonionic surfactants Tween 80 and PEG6000. The results showed avermection revealed high cytotoxicity, chlorfluazuron and hexaflumuron possessed median cytotoxicity, and chlorpyrifos and tebufenozide had little cytotoxicity on HepG2 and Tn5B1-4 cells. The co-incubation with Tween 80 and PEG6000 powerfully counteracted the cytotoxicity of avermectin. Tween 80 enhanced, whereas PEG6000 compressed, the cytotoxicity of chlorfluazuron on Tn5B1-4 cells, and also improved a bit of the cytotoxicity of chlorpyrifos or tebufenozide on HepG2 cells. PEG6000 was more suitable to be used as surfactant in improving insecticide solubility and reducing the cytotoxicity. The present investigation demonstrates the necessity of utilizing surfactants to weaken the cytotoxicity of insecticides. Copyright © 2014 Elsevier B.V. All rights reserved.

  2. Synergistic bactericidal effects of a sublethal concentration of didecyldimethylammonium chloride (DDAC) and low concentrations of nonionic surfactants against Staphylococcus aureus.

    Science.gov (United States)

    Gomi, Mitsuhiro; Osaki, Yukihiko; Mori, Miho; Sakagami, Yoshikazu

    2012-01-01

    DDAC is an effective disinfectant used in the medical and food industries and the environmental field. However, skin irritation in humans occurs at high DDAC concentrations. In this study, we analyzed the combined effect of a low concentration (0.3 ppm) of DDAC and low concentrations (6, 8, and 10 ppm) of 37 products of nonionic surfactants on the bactericidal activity against S. aureus. No bactericidal activity was found at 0.3 ppm DDAC alone. Results showed that a combination of a low concentration of DDAC (0.3 ppm) and some nonionic surfactants tested (synergistic effect of five products ≥ 2.0) improved the bactericidal activity of DDAC. Synergistic effects of DDAC and some nonionic surfactants are desirable and were suggested to occur as follows. Test surfactants acted against the cell walls of S. aureus, which allowed DDAC to act easily on the lipid double membrane in the cell wall, thereby increasing the bactericidal activity of DDAC. In the present study, synergistic effects of a low concentration of DDAC and some nonionic surfactants were observed, a phenomenon that may be considerable value in future developments.

  3. Effect of salts and nonionic surfactants on thermal characteristics of egg white proteins.

    Science.gov (United States)

    Nasabi, Mahshad; Labbafi, Mohsen; Mousavi, Mohammad E; Madadlou, Ashkan

    2017-09-01

    Effect of salts (Sodium chloride (NaCl), Sodium sulfate (Na 2 SO 4 ), Ammonium sulfate ((NH 4 ) 2 SO 4 ), and nonionic surfactants (glycerol, tween20, tween80) on thermal properties of egg white proteins as a whole were investigated. Egg white solutions with additive (0, 0.5 and 1%) were collected after 0, 1 and 2min heat treatment. Physico-chemical properties of egg white proteins were evaluated by measuring heat coagulation time, solubility and turbidity of solution. Adding glycerol caused the most significant decrease in turbidity and increase in heat coagulation time and solubility of egg white, although Sodium Chloride had the least positive impact on physico-chemical properties of egg white under heat treatment. The Fourier transform infrared (FT-IR) spectroscopy analysis of heat treated egg white proteins as a whole with additives demonstrated changes in secondary protein structure, which are presented regarding the shape, intensity and position of FT-IR band. Meanwhile, it showed a good correlation with the physico-chemical properties consequences. Generally, the effect of nonionic surfactants were more noticeable than that of salts in preventing of egg white proteins aggregation under heat treatment. By improving thermal stability of egg white proteins, its usage in thermal processing industry can be evolved. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Novel fluorinated gemini surfactants with γ-butyrolactone segments.

    Science.gov (United States)

    Kawase, Tokuzo; Okada, Kazuyuki; Oida, Tatsuo

    2015-01-01

    In this work, novel γ-butyrolactone-type monomeric and dimeric (gemini) surfactants with a semifluoroalkyl group [Rf- (CH2)3-; Rf = C4F9, C6F13, C8F17] as the hydrophobic group were successfully synthesized. Dimethyl malonate was dimerized or connected using Br(CH2)sBr (s = 0, 1, 2, 3) to give tetraesters, and they were bis-allylated. Radical addition of fluoroalkyl using Rf-I and an initiator, i.e., 2,2'-azobisisobutyronitrile for C4F9 or di-t-butyl peroxide for C6F13 and C8F17, was perform at high temperature, with prolonged heating, to obtain bis(semifluoroalkyl)-dilactone diesters. These dilactone diesters were hydrolyzed using KOH/EtOH followed by decarboxylation in AcOH to afford γ-butyrolactonetype gemini surfactants. Common 1 + 1 semifluoroalkyl lactone surfactants were synthesized using the same method. Their surfactant properties [critical micelle concentration (CMC), γCMC, pC20, ΓCMC, and AG] were investigated by measuring the surface tension of the γ-hydroxybutyrate form prepared in aqueous tetrabutylammonium hydroxide solution. As expected, the CMC values of the gemini surfactants were more than one order of magnitude smaller than those of the corresponding 1 + 1 surfactants. Other properties also showed the excellent ability of the gemini structure to reduce the surface tension. These surfactants were easily and quantitatively recovered by acidification. The monomeric surfactant was recovered in the γ-hydroxybutyric acid form, and the gemini surfactant as a mixture of γ-butyrolactone and γ-hydroxybutyric acid forms.

  5. Activity coefficients and free energies of nonionic mixed surfactant solutions from vapor-pressure and freezing-point osmometry.

    Science.gov (United States)

    MacNeil, Jennifer A; Ray, Gargi Basu; Leaist, Derek G

    2011-05-19

    The thermodynamic properties of mixed surfactant solutions are widely investigated, prompted by numerous practical applications of these systems and by interest in molecular association and self-organization. General techniques for measuring thermodynamic activities, such as isopiestic equilibration, are well-established for multicomponent solutions. Surprisingly, these techniques have not yet been applied to mixed surfactant solutions, despite the importance of the free energy for micelle stability. In this study, equations are developed for the osmotic coefficients of solutions of nonionic surfactant A + nonionic surfactant B. A mass-action model is used, with virial equations for the activity coefficients of the micelles and free surfactant monomer species. The equations are fitted to osmotic coefficients of aqueous decylsulfobetaine + dodecylsulfobetaine solutions measured by vapor-pressure and freezing-point osmometry. Equilibrium constants for mixed-micelle formation are calculated from the free monomer concentrations at the critical micelle concentrations. The derived activity coefficients of the micelles and free monomers indicate large departures from ideal solution behavior, even for dilute solutions of the surfactants. Stoichiometric activity coefficients of the total surfactant components are evaluated by Gibbs-Duhem integration of the osmotic coefficients. Relatively simple colligative property measurements hold considerable promise for free energy studies of multicomponent surfactant solutions. © 2011 American Chemical Society

  6. Comparison of Anionic, Cationic and Nonionic Surfactants as Dispersing Agents for Graphene Based on the Fluorescence of Riboflavin

    Directory of Open Access Journals (Sweden)

    Rocío Mateos

    2017-11-01

    Full Text Available Fluorescence quenching is a valuable tool to gain insight about dynamic changes of fluorophores in complex systems. Graphene (G, a single-layered 2D nanomaterial with unique properties, was dispersed in surfactant aqueous solutions of different nature: non-ionic polyoxyethylene-23-lauryl ether (Brij L23, anionic sodium dodecylsulphate (SDS, and cationic hexadecyltrimethylammonium bromide (CTAB and dodecyltrimethylammonium bromide (DTAB. The influence of the surfactant type, chain length and concentration, G total concentration and G/surfactant weight ratio on the fluorescence intensity of vitamin B2 (riboflavin was investigated. The quality of the different G dispersions was assessed by scanning and transmission electron microscopies (SEM and TEM. A quenching phenomenon of the fluorescence of riboflavin was found for G dispersions in all the surfactants, which generally becomes stronger with increasing G/surfactant weight ratio. For dispersions in the ionic surfactants, the quenching is more pronounced as the surfactant concentration raises, whilst the non-ionic one remains merely unchanged for the different G/Brij L23 weight ratios. More importantly, results indicate that DTAB solutions are the optimum media for dispersing G sheets, leading to an up to 16-fold drop in the fluorescence intensity. Understanding the mechanism in fluorescence quenching of G dispersions in surfactants could be useful for several optical applications.

  7. Observation of adsorption versus depletion interaction for charged silica nanoparticles in the presence of non-ionic surfactant

    International Nuclear Information System (INIS)

    Ray, D; Aswal, V K

    2014-01-01

    The interaction of anionic silica nanoparticles (Ludox LS30) with non-ionic surfactant decaethylene glycol monododecylether (C12E10) without and in the presence of an electrolyte has been studied by small-angle neutron scattering (SANS) and dynamic light scattering (DLS). The measurements have been carried out for fixed concentrations of nanoparticles (1 wt%), surfactant (1 wt%) and electrolyte (0.1 M NaCl). In SANS, each of these nanoparticle–surfactant systems has been examined for three different contrast conditions where both (nanoparticle and surfactant) as well as individual components (nanoparticle or surfactant) are made visible. It is observed that the nanoparticle–surfactant systems behave very differently without and with the electrolyte. In the absence of salt, the C12E10 micelles form micelle decorated core–shell structures by adsorbing on the nanoparticles. On the other hand, the adsorption of surfactant micelles on nanoparticle is completely suppressed in the presence of salt, leading to the depletion-induced aggregation of nanoparticles. These results have also been corroborated by the DLS data. We thus show that the ionic strength of solution can be used to tune the interaction of ionic silica nanoparticles with non-ionic surfactant. (paper)

  8. Observation of adsorption versus depletion interaction for charged silica nanoparticles in the presence of non-ionic surfactant.

    Science.gov (United States)

    Ray, D; Aswal, V K

    2014-01-22

    The interaction of anionic silica nanoparticles (Ludox LS30) with non-ionic surfactant decaethylene glycol monododecylether (C12E10) without and in the presence of an electrolyte has been studied by small-angle neutron scattering (SANS) and dynamic light scattering (DLS). The measurements have been carried out for fixed concentrations of nanoparticles (1 wt%), surfactant (1 wt%) and electrolyte (0.1 M NaCl). In SANS, each of these nanoparticle-surfactant systems has been examined for three different contrast conditions where both (nanoparticle and surfactant) as well as individual components (nanoparticle or surfactant) are made visible. It is observed that the nanoparticle-surfactant systems behave very differently without and with the electrolyte. In the absence of salt, the C12E10 micelles form micelle decorated core-shell structures by adsorbing on the nanoparticles. On the other hand, the adsorption of surfactant micelles on nanoparticle is completely suppressed in the presence of salt, leading to the depletion-induced aggregation of nanoparticles. These results have also been corroborated by the DLS data. We thus show that the ionic strength of solution can be used to tune the interaction of ionic silica nanoparticles with non-ionic surfactant.

  9. Comparison of Anionic, Cationic and Nonionic Surfactants as Dispersing Agents for Graphene Based on the Fluorescence of Riboflavin

    Science.gov (United States)

    Mateos, Rocío

    2017-01-01

    Fluorescence quenching is a valuable tool to gain insight about dynamic changes of fluorophores in complex systems. Graphene (G), a single-layered 2D nanomaterial with unique properties, was dispersed in surfactant aqueous solutions of different nature: non-ionic polyoxyethylene-23-lauryl ether (Brij L23), anionic sodium dodecylsulphate (SDS), and cationic hexadecyltrimethylammonium bromide (CTAB) and dodecyltrimethylammonium bromide (DTAB). The influence of the surfactant type, chain length and concentration, G total concentration and G/surfactant weight ratio on the fluorescence intensity of vitamin B2 (riboflavin) was investigated. The quality of the different G dispersions was assessed by scanning and transmission electron microscopies (SEM and TEM). A quenching phenomenon of the fluorescence of riboflavin was found for G dispersions in all the surfactants, which generally becomes stronger with increasing G/surfactant weight ratio. For dispersions in the ionic surfactants, the quenching is more pronounced as the surfactant concentration raises, whilst the non-ionic one remains merely unchanged for the different G/Brij L23 weight ratios. More importantly, results indicate that DTAB solutions are the optimum media for dispersing G sheets, leading to an up to 16-fold drop in the fluorescence intensity. Understanding the mechanism in fluorescence quenching of G dispersions in surfactants could be useful for several optical applications. PMID:29165390

  10. Micellization and microstructural studies between amphiphilic drug ibuprofen with non-ionic surfactant in aqueous urea solution

    International Nuclear Information System (INIS)

    Rub, Malik Abdul; Azum, Naved; Kumar, Dileep; Asiri, Abdullah M.; Marwani, Hadi M.

    2014-01-01

    Highlights: • Micellization behavior of (ibuprofen + non-ionic surfactant) mixtures has been investigated. • Ion–dipole type of interaction between ibuprofen drug and non-ionic surfactant. • The negative β values propose attractive interactions between the components. • Stern–Volmer binding constants (K sv ) and dielectric constant of mixed systems have also been evaluated. • The results have applicability in drug delivery. - Abstract: Herein, we have accounted for the interaction between a non-steroidal anti-inflammatory drug ibuprofen (IBF) and non-ionic surfactant polyethoxyglycol t-octylphenyl ether (TX-100 (4-(1,1,3,3-tetramethylbutyl)phenyl-polyethylene glycol) and TX-114 ((1,1,3,3-tetramethylbutyl)phenyl-polyethylene glycol)), in aqueous urea solutions using tensiometric and fluorimetric techniques at T = 298.15 K. Surface tension measurements were carried out to evaluate the critical micelle concentrations (cmc) of the drug and surfactant as well as their mixtures of varying compositions. An increase in the surface charge of the micelles was observed with the addition of urea followed by halt of micelles formation. Various physicochemical parameters, such as, cmc values of the mixture, micellar mass fraction (X 1 Rub ) of surfactants (TX-100/TX-114), interaction parameters (β) at the monolayer air–water interface and in bulk solutions, different thermodynamic parameters and activity coefficients (f 1 m ,f 2 m ) for the non-ionic surfactant and drug in the mixed micelles, were determined by using the approach of Clint, of Rubingh, and of Rosen. All results identified synergism and attractive interactions in the mixed systems of (drug–surfactant) mixtures and showed effective involvement of the non-ionic surfactant (TX-100/TX-114) component in the mixture. Micelle aggregation numbers (N agg ), evaluated by using steady-state fluorescence quenching studies, suggest that the contribution of non-ionic surfactant was always more than that of

  11. Stability of emulsion at the presence of polycomplexes based on polyacrilic and polymethacrilyc acids and nonionic surfactant OP-10

    Directory of Open Access Journals (Sweden)

    K. Omarova

    2012-12-01

    Full Text Available Stability of straight and reverse emulsions based on polyacrilic and polymethacrilyc acids and nonionic surfactant OP-10 was studied. Detergency of these polycomplexes on oil substrate covered on solid surfaces of different nature were considered. The results obtained allow explain the mechanism of exlusion of non-polar liquids from capillary-porous systems.

  12. Self-consistent field modeling of non-ionic surfactants at the silica-water interface: Incorporating molecular detail

    NARCIS (Netherlands)

    Postmus, B.R.; Leermakers, F.A.M.; Cohen Stuart, M.A.

    2008-01-01

    We have constructed a model to predict the properties of non-ionic (alkyl-ethylene oxide) (C(n)E(m)) surfactants, both in aqueous solutions and near a silica surface, based upon the self-consistent field theory using the Scheutjens-Fleer discretisation scheme. The system has the pH and the ionic

  13. Modeling the effect of structural details of nonionic surfactant on micellization in solution and adsorption onto hydrophobic surfaces

    NARCIS (Netherlands)

    Jodar-Reyes, A.B.; Ortega-Vinuesa, J.L.; Martin-Rodriguez, A.; Leermakers, F.A.M.

    2002-01-01

    Applying the classical one-gradient self-consistent-field (SCF) theory for adsorption and/or association, we can show that the molecular architecture of nonionic surfactants influences strongly the micellization in solution and the adsorption on solid-liquid interfaces. This is illustrated by using

  14. Poly(vinyl acetate)–clay hybrids prepared via emulsion polymerization, assisted by a nonionic surfactant

    NARCIS (Netherlands)

    Corobea, M.C.; Uricanu, V.I.; Donescu, D.; Radovici, C.; Serban, S.; Garea, S.; Iovu, H.

    2007-01-01

    Hybrid materials containing poly(vinyl acetate) and montmorillonite (MMT) were prepared using an one-batch emulsion polymerization recipe, assisted by a nonionic surfactant. To explain the results of our experiments, a thorough investigation of the specific interactions between the compounds was

  15. Experimental investigation of wettability alteration on residual oil saturation using nonionic surfactants: Capillary pressure measurement

    Directory of Open Access Journals (Sweden)

    Masoud Amirpour

    2015-12-01

    Full Text Available Introducing the novel technique for enhancing oil recovery from available petroleum reservoirs is one of the important issues in future energy demands. Among of all operative factors, wettability may be the foremost parameter affecting residual oil saturation in all stage of oil recovery. Although wettability alteration is one of the methods which enhance oil recovery from the petroleum reservoir. Recently, the studies which focused on this subject were more than the past and many contributions have been made on this area. The main objective of the current study is experimentally investigation of the two nonionic surfactants effects on altering wettability of reservoir rocks. Purpose of this work is to change the wettability to preferentially the water-wet condition. Also reducing the residual oil saturation (Sor is the other purpose of this work. The wettability alteration of reservoir rock is measured by two main quantitative methods namely contact angle and the USBM methods. Results of this study showed that surfactant flooding is more effective in oil-wet rocks to change their wettability and consequently reducing Sor to a low value. Cedar (Zizyphus Spina Christi is low priced, absolutely natural, and abundantly accessible in the Middle East and Central Asia. Based on the results, this material can be used as a chemical surfactant in field for enhancing oil recovery.

  16. Properties of binary surfactant systems of nonionic surfactants C12E10, C12E23, and C12E42 with a cationic gemini surfactant in aqueous solutions.

    Science.gov (United States)

    Hu, Changchao; Li, Rongqiang; Yang, Hui; Wang, Jinben

    2011-04-15

    Properties of binary surfactant systems of nonionic surfactants poly(ethylene oxide) (PEO) lauryl ethers (C(12)E(10), C(12)E(23), C(12)E(42)) with a cationic gemini surfactant, butanediyl-α,ω-bis(tetradecyldimethylammonium bromide) (14-4-14), have been investigated by Steady-state Fluorescence (FL), zeta potential, Dynamic Light Scattering (DLS), Transmission Electron Microscopy (TEM), Cryogenic Transmission Electron Microscopy (CryoTEM), and X-ray Diffraction (XRD). Through FL measurements, critical micelle concentration (CMC) of the three binary systems for different mixing mole fractions is determined and the values fall between those of pure constituent surfactants. Ideal CMC (CMC(ideal)), mole fraction in aggregates (X), interaction parameter (β), activity coefficients (f(1) and f(2)), and excess free energy of mixing (ΔG(ex)) have been calculated. All these parameters indicate nonideal behavior and synergistic interactions between the constituent surfactants, which is explained in terms of electrostatic attraction between headgroups of constituent surfactants and reduction of electrostatic repulsion between headgroups of 14-4-14 due to the presence of nonionic surfactants. DLS, TEM and CryoTEM results show that nonionic surfactants facilitate the formation of larger aggregates. Micelles and vesicles in larger size compared with those of 14-4-14 coexist in the mixed solutions. Both surfactant composition and PEO chain length are found to play a strong effect on the properties of the binary systems. Copyright © 2011 Elsevier Inc. All rights reserved.

  17. An Energetic Analysis of the Phase Separation in Non-Ionic Surfactant Mixtures: The Role of the Headgroup Structure

    Directory of Open Access Journals (Sweden)

    José Manuel Hierrezuelo

    2014-08-01

    Full Text Available The main goal of this paper was to examine the effect of the hydrophilic surfactant headgroup on the phase behavior of non-ionic surfactant mixtures. Four mixed systems composed of an ethoxylated plus sugar-based surfactants, each having the same hydrophobic tail, were investigated. We found that the hydrophilicity of the surfactant inhibits the tendency of the system to phase separate, which is sensitive to the presence of NaCl. Applying a classical phase separation thermodynamic model, the corresponding energy parameters were evaluated. In all cases, the parameters were found to depend on the type of nonionic surfactant, its concentration in the micellar solution and the presence of NaCl in the medium. The experimental results can be explained by assuming the phase separation process takes place as a result of reduced hydration of the surfactant headgroup caused by a temperature increase. The enthalpy-entropy compensation plot exhibits excellent linearity. We found that all the mixed surfactant systems coincided on the same straight line, the compensation temperature being lower in the presence of NaCl.

  18. A Review on the Environmental Behavior of the Polyoxyethylene Type Nonionic Surfactants Adjuvants in Pesticides

    Directory of Open Access Journals (Sweden)

    KONG Xiang-ji

    2017-05-01

    Full Text Available Polyoxyethylene type nonionic surfactants such as alkylphenol ethoxylates(APEOs, alcohol ethoxylates(AEOs and alkylamine ethoxylates(ANEOs are typical pesticide adjuvants. Their unique environmental behavior characteristic is reflected in the parameters describing the fate e.g.distribution coefficient, adsorption to soil, degradation and effects of these substances. The major environmental problem related to these compounds is their part metabolites' relatively higher environmental risk. In views of their chemical structure, this paper outlined present knowledge on occurrence, fate and environment effect of the three adjuvants:AEOs, ANEOs and APEOs. The adsorption behaviour of ANEOs in contrast to AEOs was particularly variable and matrix dependent due to the ability of the compound to ionise at environmentally relevant pH. Probably because the compounds exceeded high soil adsorption and were easily degradable which were reflected in the low environmental concentrations generally found in monitoring studies.

  19. Effect of protic ionic liquid and surfactant structure on partitioning of polyoxyethylene non-ionic surfactants.

    Science.gov (United States)

    Topolnicki, Inga L; FitzGerald, Paul A; Atkin, Rob; Warr, Gregory G

    2014-08-25

    The partitioning constants and Gibbs free energies of transfer of poly(oxyethylene) n-alkyl ethers between dodecane and the protic ionic liquids (ILs) ethylammonium nitrate (EAN) and propylammonium nitrate (PAN) are determined. EAN and PAN have a sponge-like nanostructure that consists of interpenetrating charged and apolar domains. This study reveals that the ILs solvate the hydrophobic and hydrophilic parts of the amphiphiles differently. The ethoxy groups are dissolved in the polar region of both ILs by means of hydrogen bonds. The environment is remarkably water-like and, as in water, the solubility of the ethoxy groups in EAN decreases on warming, which underscores the critical role of the IL hydrogen-bond network for solubility. In contrast, amphiphile alkyl chains are not preferentially solvated by the charged or uncharged regions of the ILs. Rather, they experience an average IL composition and, as a result, partitioning from dodecane into the IL increases as the cation alkyl chain is lengthened from ethyl to propyl, because the IL apolar volume fraction increases. Together, these results show that surfactant dissolution in ILs is related to structural compatibility between the head or tail group and the IL nanostructure. Thus, these partitioning studies reveal parameters for the effective molecular design of surfactants in ILs. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Effect of the Presence of Nonionic Surfactant Brij35 on the Mobility of Metribuzin in Soil

    Directory of Open Access Journals (Sweden)

    Eman M. ElSayed

    2013-04-01

    Full Text Available Given the water scarcity becoming endemic to a large portion of the globe, arid region irrigation has resorted to the use of treated, partially treated, or even untreated wastewaters. Such waters contain a number of pollutants, including surfactants. Applied to agricultural lands, these surfactants could affect the fate and transport of other chemicals in the soil, particularly pesticides. A field lysimeter study was undertaken to investigate the effect of nonionic surfactant, Brij35, on the in-soil fate and transport of a commonly used herbicide, metribuzin [4-amino-6-tert-butyl-3-(methylthio-1,2,4-triazin-5(4H-one]. Nine PVC lysimeters, 1.0 m long × 0.45 m diameter, were packed with a sandy soil to a bulk density of 1.35 mg m−3. Antibiotic-free cattle manure was applied (10 mg ha−1 at the surface of the lysimeters. Metribuzin was then applied to the soil surface of all lysimeters at a rate of 1.00 kg a.i. ha−1. Each of three aqueous Brij35 solutions, 0, 0.5 and 5 mg L−1 (i.e., “good”, “poor” and “very poor” quality irrigation water were each applied to the lysimeters in triplicate. Analysis for metribuzin residues in samples of both soil and leachate, collected over a 90-day period, showed the surfactant Brij35 to have increased the mobility of metribuzin in soil, indicating that continued use of poor quality water could influence pesticide transport in agricultural soils, and increase the risk of groundwater contamination.

  1. Non-ionic surfactant vesicles simultaneously enhance antitumor activity and reduce the toxicity of cantharidin

    Directory of Open Access Journals (Sweden)

    Han W

    2013-06-01

    Full Text Available Wei Han,1,* Shengpeng Wang,2,* Rixin Liang,1 Lan Wang,1 Meiwan Chen,2 Hui Li,1 Yitao Wang1,2 1Institute of Chinese Materia Medica, China Academy of Chinese Medical Sciences, Beijing, People’s Republic of China; 2State Key Laboratory of Quality Research in Chinese Medicine, Institute of Chinese Medical Sciences, University of Macau, Macau, People’s Republic of China *These authors contributed equally to this work Objective: The objective of the present study was to prepare cantharidin-entrapped non-ionic surfactant vesicles (CTD-NSVs and evaluate their potential in enhancing the antitumor activities and reducing CTD’s toxicity. Methods and results: CTD-NSVs were prepared by injection method. 3-(4,5-Dimethylthiazol-2-yl-2,5-diphenyltetrazolium bromide assay and flow cytometry analysis showed that CTD-NSVs could significantly enhance in vitro toxicity against human breast cancer cell line MCF-7 and induce more significant cell-cycle arrest in G0/G1 phase. Moreover, Hoechst 33342 staining implicated that CTD-NSVs induced higher apoptotic rates in MCF-7 cells than free CTD solution. In vivo therapeutic efficacy was investigated in imprinting control region mice bearing mouse sarcoma S180. Mice treated with 1.0 mg/kg CTD-NSVs showed the most powerful antitumor activity, with an inhibition rate of 52.76%, which was significantly higher than that of cyclophosphamide (35 mg/kg, 40.23% and the same concentration of free CTD (1.0 mg/kg, 31.05%. In addition, the acute toxicity and liver toxicity of CTD were also distinctly decreased via encapsulating into NSVs. Conclusion: Our results revealed that NSVs could be a promising delivery system for enhancing the antitumor activity and simultaneously reducing the toxicity of CTD. Keywords: cantharidin, non-ionic surfactant vesicle, toxicity, antitumor activity

  2. Development of Drug Loaded Nanoparticles Binding to Hydroxyapatite Based on a Bisphosphonate Modified Nonionic Surfactant

    Directory of Open Access Journals (Sweden)

    Jiabin Zhang

    2015-01-01

    Full Text Available This study aimed at development of drug loaded nanoparticles which could bind to hydroxyapatite (HA to construct drug or growth factor releasing bone graft substitutes. To this end, the terminal hydroxyl group of a nonionic surfactant Brij 78 (polyoxyethylene (20 stearyl ether was first modified with pamidronate (Pa. Using Pa-Brij 78 as both a surfactant and an affinity ligand to HA, three different Pa surface functionalized nanoparticles were prepared, named as solid lipid nanoparticles (Pa-SNPs, nanoemulsions (Pa-NEMs, and PLGA nanoparticles (Pa-PNPs. A model drug curcumin was successfully encapsulated in the three nanoparticles. The sizes of Pa-NEM and Pa-PNP were around 150 nm and the size of Pa-SNP was around 90 nm with polydispersity indexes (PDIs less than 0.20. Drug encapsulation efficiencies of the three nanoparticles were all greater than 85%. Furthermore, the order of binding affinity of the nanoparticles to HA was Pa-PNP>Pa-NEM=Pa-SNP. After lyophilization, the sizes of the three nanoparticles were increased about 0.5–2.0-fold but their binding affinities to HA were almost the same as the fresh prepared nanoparticles. In conclusion, a Pa-modified Brij 78 was synthesized and used for fabrication of a series of drug loaded nanoparticles to construct drug-eluting HA-based bone graft substitutes.

  3. Spectrophotometric determination of molybdenum with non-ionic surfactant and thiocyanate

    International Nuclear Information System (INIS)

    Hayashi, Kenjiro; Yamamoto, Atsuo; Fujimura, Yasue; Ito, Saburo.

    1980-01-01

    Although the molybdenum (V)-thiocyanate complex is quite stable in non-aqueous solvent such as ether, the complex in dilute acidic solution is unstable. However, this unstable complex was stabilized remarkably by addition of some non-ionic surfactant such as Triton X-100 (alkylphenolpolyoxyethylene ether). The application of this stabilizing effect of the surfactant to the photometric determination of trace amounts of molybdenum with thiocyanate resulted in an increase in the sensitivity. The rate of formation of the Mo(V)-SCN complex was affected by the presence of ferrous ion and its rate constant was proportional to the concentration of Fe(II). The stabilizing effect of the surfactant on the yellowish orange coloration can be understood if we assume that the Mo(V)-SCN complex is incorporated into the micelles of Triton X-100 as [H 2 + , MoO(CNS) 5 2- ]. The optimum condition for the determination of molybdenum is as follows: concentration of sulfuric acid, 0.22 mol dm -3 ; Triton X-100, 0.8%; ascorbic acid, 0.32 mol dm -3 ; thiocyanate, 0.30 mol dm -3 ; iron, 40 mg dm -3 ; standing time for coloration, 10 min and more. Beer's law was obeyed over the range (1 -- 233) μg/50 cm 3 . The molar absorption coefficient at 468 nm was 1.7 2 x 10 4 cm -1 mol -1 dm 3 . The maximum permissible limits of foreign ions (mg/50 cm 3 ) were as follows: Ni(30); Co(12); W(VI) (2); Cu, Zn, V(V) (3); Cr(VI) (5). Large amounts of iron interfered, but this interference was removed by addition of the same amount of iron to the reagent blank. Trace amounts of molybdenum in steel was determined by this method with satisfactory results. (author)

  4. Novel fluorinated surfactants for perfluorochemical emulsification: biocompatibility assessments of glycosidic and polyol derivatives.

    Science.gov (United States)

    Edwards, C M; Lowe, K C; Trabelsi, H; Lucas, P; Cambon, A

    1997-05-01

    A novel series of fluoro-surfactants, derived from glycosides (monosaccharides) or polyols (ureas or carbamates), have been produced for use in respiratory gas-carrying perfluorochemical emulsions. Compounds were synthesised via simple, but highly selective, routes using highly fluorinated isocyanates with amino alcohols, polyethoxylated alcohols and partially protected sugars at anomeric carbon; yields were 88-95%. Resultant compounds were perfluoroalkylated with hydroxylic "head" groups. The biocompatibility of surfactants with human blood in vitro was assessed using a conventional haemolysis test. Compounds showing insignificant haemolysis at up to 10 g l-1 were further evaluated (i) for their effects on neutrophil chemiluminescence, and (ii) in a human platelet aggregation assay. Some fluoro-surfactants inhibited spontaneous platelet aggregation, in blood anti-coagulated with hirudin, at concentrations of 0.01% (w/v), suggesting possible applications as antithrombotic agents.

  5. Thermodynamics of micellization of nonionic saccharide-based N-acyl-N-alkylaldosylamine and N-acyl-N-alkylamino-1-deoxyalditol surfactants

    NARCIS (Netherlands)

    Pestman, J.M.; Kevelam, J.; Blandamer, M.J.; Doren, H.A. van; Kellogg, R.M.; Engberts, J.B.F.N.

    1999-01-01

    Eight homologous series of nonionic carbohydrate-derived surfactants in which the alkyl chains are linked through N-acylated amine bonds were synthesized, and their critical micelle concentrations (cmc's) and standard enthalpies of micellization were determined using titration microcalorimetry.

  6. Coarsening of firefighting foams containing fluorinated hydrocarbon surfactants

    Science.gov (United States)

    Kennedy, Matthew J.; Dougherty, John A.; Otto, Nicholas; Conroy, Michael W.; Williams, Bradley A.; Ananth, Ramagopal; Fleming, James W.

    2013-03-01

    Diffusion of gas between bubbles in foam causes growth of large bubbles at the expense of small bubbles and leads to increasing mean bubble size with time thereby affecting drainage. Experimental data shows that the effective diffusivity of nitrogen gas in aqueous film forming foam (AFFF), which is widely used in firefighting against burning liquids, is several times smaller than in 1% sodium dodecyl sulfate (SDS) foam based on time-series photographs of bubble size and weighing scale recordings of liquid drainage. Differences in foam structure arising from foam production might contribute to the apparent difference in the rates of coarsening. AFFF solution produces wetter foam with initially smaller bubbles than SDS solution due in part to the lower gas-liquid surface tension provided by the fluorosurfactants present in AFFF. Present method of foam production generates microbubble foam by high-speed co-injection of surfactant solution and gas into a tube of 3-mm diameter. These results contribute to our growing understanding of the coupling between foam liquid fraction, bubble size, surfactant chemistry, and coarsening. NRC Resident Research Associate at NRL

  7. The effects of alkylammonium counterions on the aggregation of fluorinated surfactants and surfactant ionic liquids.

    Science.gov (United States)

    Pottage, Matthew J; Greaves, Tamar L; Garvey, Christopher J; Tabor, Rico F

    2016-08-01

    The effects of organic counterions with varying carbon number on surfactant aggregation have been analysed by coupling perfluorooctanoate surfactant anions with various alkylammonium counterions. Both the degree of substitution (primary to tertiary) and alkyl chain length (0-3 carbons) of the counterions were varied to provide a comprehensive matrix of geometries and lipophilicities. Surface activity was measured using pendant drop tensiometry, while temperature-controlled small-angle neutron scattering was used to probe changes in aggregation morphology. It was found that the use of such alkylammonium counterions resulted in a strong preference for bilayer formation even at low surfactant concentration (surfactant-rich lamellar phase coexists with a dilute micellar phase. The results indicate that aggregation is controlled by a delicate balance of counterion size, hydrophilicity and diffuseness of charge, providing new methods for the subtle control of surfactant solutions. Crown Copyright © 2016. Published by Elsevier Inc. All rights reserved.

  8. Interaction between cationic and conventional nonionic surfactants in the mixed micelle and monolayer formed in aqueous medium

    Directory of Open Access Journals (Sweden)

    Nabel A. Negm

    2011-01-01

    Full Text Available Mixed micellization and surface properties of cationic and nonionic surfactants dimethyl decyl-, tetradecyl- and hexadecyl phosphineoxide mixtures are studied using conductivity and surface tension measurements. The models of Rubingh, Rosen, and Clint, are used to obtain the interaction parameter, minimum area per molecule, mixed micelle composition, free energies of mixing and activity coefficients. The micellar mole fractions were always higher than ideal values indicating high contributions of cationics in mixed micelles. Activity coefficients were less than unity indicating synergism in micelles. The negative free energies of mixing showed the stability of the surfactants in the mixed micelles.

  9. Interactions between fluorinated cationic guar gum and surfactants in the dilute and semi-dilute solutions.

    Science.gov (United States)

    Wang, Chen; Li, Xiaorui; Li, Peizhi; Niu, Yuhua

    2014-01-01

    The interactions between the fluorinated cationic guar gum (FCGG) and ionic surfactants including cetyl trimethyl ammonium bromide (CTAB) and sodium lauryl sulfate (SDS) were studied by light scattering, fluorescence spectroscopy, UV-spectrophotometer, (19)F NMR and dynamic rheometer, respectively. The FCGG is prepared with cationic guar gum, isophorone diisocyanate and 2,2,3,4,4,4-hexafluoro-1-butanol. The results show that, with the addition of the surfactants, the stretching degree of the FCGG chains is increased in the FCGG/CTAB solutions, while the dramatical shrinking of FCGG chain, the phase separation and the re-stretched macromolecules appear successively because of the electricity neutralization reaction in the FCGG/SDS system. The mixed hydrophobic domains in all solutions will be reinforced and then dismantled. The solution elasticity shows up the maximum value accordingly. The surfactants can be embedded in the micro-domains and then hinder the fluorinated segmental motions. The interactions between FCGG and SDS are much stronger than those between FCGG and CTAB. Copyright © 2013 Elsevier Ltd. All rights reserved.

  10. One-step synthesis, wettability and foaming properties of high-performance non-ionic hydro-fluorocarbon hybrid surfactants

    Science.gov (United States)

    Peng, Ying-ying; Lu, Feng; Tong, Qing-Xiao

    2018-03-01

    In this work, a series of non-ionic hydro-fluorocarbon hybrid surfactants (C9F19CONH(CH2)3N(CmH2m+1)2, abbreviated as C9F19AM (m = 1), C9F19AE (m = 2) and C9F19AB (m = 4) were easily synthesized by one-step reaction and characterized by 1HNMR, 19FNMR and MS spectroscopy. Unlike conventional non-ionic surfactants (most hydrophilic units consisted of hydroxy or ether groups), their hydrophilic groups were composed of amide group, an eco-friendly unit. The surface activity, wettability, thermal stability and foaming performance were investigated. The results showed that the C9F19AE (C9F19CONH(CH2)3N[CH2CH3]2) had superior surface and interface activities, which could reduce the surface tension of water down to 15.37 mN/m and the interfacial tension (cyclohexane/water/surfactants) to 5.8 mN/m with a low cmc (critical micelle concentration) of 0.12 mmol/L. Through the calculation of Amin (the minimum area occupied per-surfactant molecule), we speculated this higher surface activity was related to the compatibility between hydrocarbon and fluorocarbon chains. When used as wetting and foaming agents, the C9F19AE also outperformed great advantages over conventional non-ionic fluorocarbon and hydrocarbon surfactants, which could decrease the contact angle of water on PTFE plate from 107.7° to 3.6°, and increase the foam integrated value F to 536 500 ± 3066.5 mL s. Moreover, the decomposition temperature (Td) of C9F19AE could reach up to 173 °C. This work demonstrates a valuable strategy to develop a kind of high-efficiency foaming agent via facile synthesis.

  11. Preparation of a Fluorocarbon Polymerizable Surfactant and Its Application in Emulsion Polymerization of Fluorine-Containing Acrylate

    Directory of Open Access Journals (Sweden)

    Meng Zhao

    2017-11-01

    Full Text Available A novel polymerizable fluorocarbon surfactant, perfluoro (4–methyl–3, 6–dioxaoct–7–ene sodium sulfonate (PSVNa, was synthesized and characterized. The fluorocarbon surfactant PSVNa and its mixture PSVNa/SDS were used as emulsifiers during the emulsion polymerization of DFHMA/MMA. The investigation of polymerization kinetics, particle size, and stability of the emulsions revealed that PSVNa has excellent emulsifying properties. The NMR spectrum of the copolymer and the detection of residual PSVNa show that more than 95% of the fluorocarbon surfactants have been linked to the polymer chains by radical polymerization, which will greatly reduce the environmental pollution caused by fluorinated surfactants.

  12. Synthesis and characterization of high molecular weight hydrophobically modified polyacrylamide nanolatexes using novel nonionic polymerizable surfactants

    Directory of Open Access Journals (Sweden)

    A.M. Al-Sabagh

    2013-12-01

    Full Text Available In this article, nine hydrophobically modified polyacrylamides (HM-PAM nanolatexes, were synthesized by copolymerizing the acrylamide monomer and novel polymerizable surfactants (surfmers. The reaction was carried out by inverse microemulsion copolymerization technique. The copolymerization was initiated by redox initiators composed of potassium peroxodisulphate and sodium bisulfite. The emulsion was stabilized using mixed tween 85 and span 80 as nonionic emulsifiers. The prepared HM-PAMs were classified into three groups according to the surfmers used in the copolymerization. The chemical structures of the prepared HM-PAMs were confirmed by FT-IR, 1H NMR and 13C NMR. The thermal properties were estimated with the thermal gravimetric analysis (TGA. The size and morphology of the prepared latexes were investigated by the dynamic light scattering (DLS and the High Resolution Transmission Electron Microscope (HRTEM. Finally, the molecular weights of the prepared copolymers were determined by the GPC and the viscosity average molecular weight method. They were situated between 1.58 × 106 and 0.89 × 106.

  13. Boosting up the electrical performance of low-grade PEDOT:PSS by optimizing non-ionic surfactants.

    Science.gov (United States)

    Kim, Sunghee; Cho, Sunghwan; Lee, Su Jeong; Lee, Gilwoon; Kong, Minsik; Moon, Sungmin; Myoung, Jae-Min; Jeong, Unyong

    2017-10-26

    Although PEDOT:PSS has already been applied to various electronic devices, commercialized PEDOT:PSS products having high conductivity are expensive, which is a considerable burden on device manufacturing. In this study, we optimize non-ionic surfactants mixed in a PEDOT:PSS solution to upgrade a low-grade product of low conductivity to the level of a high-grade product of high conductivity. This study systematically investigates the phase diagram, morphology, conductivity, and mechanical stability of the PEDOT:PSS films according to the hydrophilicity of non-ionic surfactants. This study reveals that the conductivity of the PEDOT:PSS film varies greatly depending on the chemical structure of the surfactant and its weight fraction in the thin film. Under the optimum conditions (chemical structure and weight fraction) of the surfactant, the conductivity of the low value product could be improved to the conductivity level of the high value product. The electrical properties of the films were excellently stable even under the extreme cyclic bending tests at a bending radius of 1.5 mm. The low-grade and high grade products showed the same electrical performance when they were used in the Ag nanowires/PEDOT:PSS hybrid transparent electrodes. The results are expected to be applied immediately not only in the laboratory but also in various industrial fields.

  14. Comparison of the effects of cationic, anionic and nonionic surfactants on the properties of Sr-hexaferrite nanopowder synthesized by a sol-gel auto-combustion method

    Energy Technology Data Exchange (ETDEWEB)

    Ghobeiti Hasab, M. [Center of Excellence in Magnetic Materials, School of Metallurgy and Materials Engineering, University of Tehran, Tehran (Iran, Islamic Republic of); Seyyed Ebrahimi, S.A. [Center of Excellence in Magnetic Materials, School of Metallurgy and Materials Engineering, University of Tehran, Tehran (Iran, Islamic Republic of)]. E-mail: saseyyed@ut.ac.ir; Badiei, A. [School of Chemistry, University of Tehran, Tehran (Iran, Islamic Republic of)

    2007-09-15

    In this research, Sr-hexaferrite nanopowders were synthesized by a sol-gel auto-combustion route using three different surfactant types: cationic, anionic and nonionic. The obtained powders were characterized by FTIR, XRD and SEM techniques and their physical properties were compared. The results showed a decrease in crystallite size of the resultant Sr-hexaferrite powder in presence of cationic and anionic surfactants, while there are no significant changes in presence of nonionic one. However, all three types of surfactants resulted in a decrease in the formation temperature of Sr-hexaferrite.

  15. Cloud Point Extraction of Toxic Reactive Black 5 Dye from Water Samples Using Triton X-100 as Nonionic Surfactant

    Directory of Open Access Journals (Sweden)

    Raziyeh Mousavi

    2011-01-01

    Full Text Available A surfactant mediated cloud point extraction (CPE procedure has been developed to remove color from wastewater containing reactive black 5, using triton x-100 (TX-100 as non-ionic surfactant. The effects of the concentration of the surfactant, pH, temperature and salt concentration on the different concentrations of dye have been studied and optimum conditions were obtained for the removal of reactive black 5 (RB 5. The concentration of RB 5 in the dilute phase was measured using UV-Vis spectrophotometer. It was found that the separation of phases was complete and the recovery of RB 5 was very effective in the presence of NaCl as an electrolyte. The results showed that up to 600 mg L-1 of RB 5 can quantitatively be removed (>97% by cloud point extraction procedure in a single extraction using optimum conditions.

  16. Role of a non-ionic surfactant in direct electron transfer-type bioelectrocatalysis by fructose dehydrogenase

    International Nuclear Information System (INIS)

    Kawai, Shota; Yakushi, Toshiharu; Matsushita, Kazunobu; Kitazumi, Yuki; Shirai, Osamu; Kano, Kenji

    2015-01-01

    Highlights: • Addition of Triton ® X-100 (1%) completely quenches the FDH-catalyzed current at hydrophobic electrode, but causes only small competitive effect at hydrophilic electrode. • Quartz crystal microbalance measurements support the adsorption of FDH and Triton ® X-100 on both of the electrodes. • The surfactant forms a monolayer on the hydrophobic electrode and FDH adsorbs on the surfactant monolayer. • The surfactant forms a bilayer on the hydrophilic electrode and FDH is embedded in the bilayer to communicate with the electrode. - ABSTRACT: A heterotrimeric membrane-bound fructose dehydrogenase (FDH) from Gluconobacter japonicus NBRC3260 contains FAD in subunit I and three heme C moieties in subunit II as the redox centers, and is one of the direct electron transfer (DET)-type redox enzymes. FDH-catalyzed current density of fructose oxidation at hydrophilic mercaptoethanol (MEtOH)-modified Au electrode is much larger than that at hydrophobic mercaptoethane (MEtn)-modified Au electrode. Addition of a non-ionic surfactant Triton ® X-100 (1%) completely quenches the catalytic current at the MEtn-modified Au electrode, while only small competitive effect is observed at the MEtOH-modified Au electrode. Quartz crystal microbalance measurements support the adsorption of FDH and Triton ® X-100 on both of the modified electrodes. We propose a model to explain the phenomenon as follows. The surfactant forms a monolayer on the hydrophobic MEtn-modified electrode with strong hydrophobic interaction, and FDH adsorbs on the surface of the surfactant monolayer. The monolayer inhibits the electron transfer from FDH to the electrode. On the other hand, the surfactant forms a bilayer on the hydrophilic MEtOH-modified electrode. The interaction between the surfactant bilayer and the hydrophilic electrode is relatively weak so that FDH replaces the surfactant and is embedded in the bilayer to communicate electrochemically with the hydrophilic electrode

  17. An investigation into interactions between polyacrylic polymers and a non-ionic surfactant: an emulsion preformulation study.

    Science.gov (United States)

    Simovic, S; Tamburic, S; Milic-Askrabic, J; Rajic, D

    1999-07-20

    The aim of this study was to investigate possible interactions between a polymeric emulsifier and a non-ionic surfactant, with a view of achieving better understanding of emulsion stabilisation mechanisms. The polymeric emulsifier used was acrylates/C10-30 alkyl acrylate crosspolymer (Pemulen TR-2(R)), while Polyoxyethylene 20 sorbitan mono-oleate (Polysorbate 80) has been chosen as a model surfactant. Both materials were used within the concentration range relevant for their practical application. A 0.2%w/w aqueous dispersion of polymeric emulsifier, containing various amounts of surfactant (from 0.01 to 1.0% w/w) was used throughout the study. Interfacial aspects of the proposed polymer/surfactant interactions were analysed by means of surface tension measurements. Changes in the network structure of the test dispersions were quantified by continuous shear rheometry, supported by the texture analysis. To analyse the influence of hydrophobic alkyl groups present on the Pemulen TR-2(R) chains, an unmodified, hydrophilic polyacrylic acid polymer, Carbopol 934P(R), was assessed under the same conditions. The results obtained by both surface tension and rheological studies have revealed large differences in behaviour of the two polymers in the presence of the model surfactant. Pemulen TR-2(R) was shown to desorb the surfactant from the surface, within the whole concentration range studied. Furthermore, an increase in viscosity and texture profile parameters with increasing Polysorbate 80 concentration up to 0.3% w/w was evident in the case of Pemulen TR-2(R) dispersions. This was followed by a decrease in the gel network strength at higher surfactant concentrations. On the other hand, Carbopol 934P(R) has shown no signs of surfactant desorption and only small changes in the network structure with the increasing concentration of surfactant. It is shown in this study that an interaction between a polymeric emulsifier Pemulen TR-2(R) and a non-ionic surfactant

  18. Simple one step synthesis of nonionic dithiol surfactants and their self-assembling with silver nanoparticles: Characterization, surface properties, biological activity

    Energy Technology Data Exchange (ETDEWEB)

    Abd-Elaal, Ali A., E-mail: ali_ashour5@yahoo.com; Tawfik, Salah M.; Shaban, Samy M.

    2015-07-01

    Graphical abstract: - Highlights: • Nonionic dithiol surfactants were synthesized by simple one step esterification. • The surface activity of the synthesized dithiol surfactants showed high tendency toward adsorption and micellization. • The nanostructure of the synthesized nonionic dithiol surfactants with silver nanoparticles was prepared. • The silver nanoparticles enhanced the biological activity of the synthesized dithiol surfactants. - Abstract: Simple esterification of 2-mercaptoacetic acid and polyethylene glycol with different molecular weights was done to form the desired nonionic dithiol surfactants. The chemical structures of synthesized thiol surfactants were confirmed using FT-IR and {sup 1}H NMR spectra. The surface activity of the synthesized surfactants was determined by measurement of the surface tension at different temperatures. The surface activity measurements showed their high tendency towards adsorption and micellization. The thermodynamic parameters of micellization (ΔG{sub mic}, ΔH{sub mic} and ΔS{sub mic}) and adsorption (ΔG{sub ads}, ΔG{sub ads} and ΔS{sub ads}) showed their tendency toward adsorption at the interfaces and also micellization in the bulk of their solutions. The nanostructure of the synthesized nonionic dithiol surfactants with silver nanoparticles was prepared and investigated using UV and TEM techniques. Screening tests of the synthesized dithiol surfactants and their nanostructure with silver nanoparticles, against gram positive bacteria (Bacillus subtilis and Microccus luteus), gram negative bacteria (Escherichia coli and Bordatella pertussis) and fungi (Aspergillus niger and Candida albicans) showed that they are highly active biocides. The presence of silver nanoparticles enhancement the biological activities of the individual synthesized nonionic dithiol surfactants.

  19. Particle-size dependent sorption and desorption of pesticides within a water-soil-nonionic surfactant system.

    Science.gov (United States)

    Wang, Peng; Keller, Arturo A

    2008-05-01

    Although nonionic surfactants have been considered in surfactant-aided soil washing systems, there is little information on the particle-size dependence of these processes, and this may have significant implications for the design of these systems. In this study, Triton-100 (TX) was selected to study its effect on the sorption and desorption of two pesticides (Atrazine and Diuron) from different primary soil size fractions (clay, silt, and sand fractions) under equilibrium sorption and sequential desorption. Soil properties, TX sorption, and pesticide sorption and desorption all exhibited significant particle-size dependence. The cation exchange capacity (CEC) of the bulk soils and the soil fractions determined TX sorption capacity, which in turn determined the desorption efficiency. Desorption of pesticide out of the clay raction is the limiting factor in a surfactant-aided washing system. The solubilization efficiency of the individual surfactant micelles decreased as the amount of surfactant added to the systems increased. Thus, instead of attempting to wash the bulk soil, a better strategy might be to either (1) use only the amount of surfactant that is sufficient to clean the coarse fraction, then separate the fine fraction, and dispose or treat it separately, or (2) to separate the coarse fractions mechanically and then treatthe coarse and fine fractions separately. These results may be applicable to many other hydrophobic organic compounds such as polyaromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) strongly sorbed onto soils and sediments.

  20. Effect of Temperature on the Critical Micelle Concentration and Micellization Thermodynamic of Nonionic Surfactants: Polyoxyethylene Sorbitan Fatty Acid Esters

    Directory of Open Access Journals (Sweden)

    Ehsan Mohajeri

    2012-01-01

    Full Text Available In this study, non-ionic surfactants, polyoxyethylene sorbitan fatty acid esters (polysorbate are chosen to examine the temperature effect on the CMC over a wide temperature range. The enthalpy and entropy of micelle formation are evaluated according to the phase separation model. The surface tension of solutions was determined by means of Du Nöuys ring. The CMC values were taken from the sharp breaks in the surface tension vs. logarithms of surfactant concentration plots. As the surfactants' chain length increases the CMC at a constant temperature decreases, which is directly related to the decrease of hydrophilicity of the molecules. For each surfactant, as the system temperature increases, the CMC initially decreases and then increases, owing to the smaller probability of hydrogen bond formation at higher temperatures. The onset of micellization tends to occur at higher concentrations as the temperature increases. To evaluate the enthalpy of micellization, the CMCs are first correlated by a polynomial equation. It is found that ∆Gºm decreases monotonically as the temperature increases over the whole temperature range. Both ∆Hºm and ∆Sºm appear to be decrease monotonically with an increase in temperature. The compensation temperature was found to be 42 ºC by linear regression over the whole temperature range and for all three surfactant systems together.

  1. Conductometric study of sodium dodecyl sulfate - nonionic surfactant (Triton X-100, Tween 20, Tween 60, Tween 80 or Tween 85 mixed micelles in aqueous solution

    Directory of Open Access Journals (Sweden)

    Ćirin Dejan M.

    2012-01-01

    Full Text Available The present study is concerned with the determination of the critical micelle concentration (cmc of mixed micelles of sodium dodecyl sulfate with one of five nonionic surfactants (Triton X-100, Tween 20, Tween 60, Tween 80 or Tween 85 from conductance measurements. Based on the calculated values of the β parameters we have noticed that SDS-nonionic surfactants mostly showed strong synergistic effect. It was found that nonionic surfactants with mainly longer and more hydrophobic tail show stronger interactions with hydrophobic part of SDS, thus expressing stronger synergism. In SDS-Tween 80 binary system the strongest synergistic effect was noticed. SDS-Tween 85 micellar system showed antagonistic effect, most probably because the presence of the double bond in its three hydrophobic tails (three C18 tails makes it sterically rigid.

  2. A combined binding mechanism of nonionic ethoxylated surfactants to bovine serum albumin revealed by fluorescence and circular dichroism.

    Science.gov (United States)

    Iovescu, Alina; Băran, Adriana; Stîngă, Gabriela; Cantemir-Leontieş, Anca Ruxandra; Maxim, Monica Elisabeta; Anghel, Dan Florin

    2015-12-01

    The study systematically investigates aqueous mixtures of fixed bovine serum albumin (BSA) and various ethoxylated nonionic surfactants belonging to a homologous series or not. Mono-disperse tetra-(C12E4), hexa-(C12E6) and octa-ethyleneglycol mono-n-dodecyl ether (C12E8), and poly-disperse eicosa-ethyleneglycol mono-n-tetradecyl ether (C14EO20) are respectively employed. Fluorescence and circular dichroism measurements are performed at surfactant/protein molar ratios (rm)s lower and higher than one. We aim to get new insights into the binding mechanism of these species and to differentiate among the interaction abilities of these surfactants. The relative magnitude of the binding thermodynamic parameters by fluorescence, and the increase of α-helix prove that hydrogen bonding drives the interaction next to the hydrophobic attraction. C12En (n=4,6,8) develop more H bonds with the albumin than C14EO20 owing to a zigzag conformation of their short ethyleneoxide chains. Among the homologous surfactants, C12E6 has a slightly stronger interaction with BSA due to a maximal number of H bonds at a minimal hindering. Static fluorescence and dynamic fluorescence indicate an inter-conversion between the tryptophan (Trp) rotamers which happens around the surfactants critical micellar concentration. For C14EO20, the meander conformation of the polar group determines a less evident conversion of the Trp rotamers and smaller α-helix rise. Binding isotherms of the homologous surfactants and the fluorescence quenching mechanism by C12E6 are also provided. Copyright © 2015 Elsevier B.V. All rights reserved.

  3. Effects of temperature on the rheological behavior of worm-like micelles in a mixed nonionic surfactant system.

    Science.gov (United States)

    Hashizaki, Kaname; Taguchi, Hiroyuki; Saito, Yoshihiro

    2009-01-01

    We examined the effects of temperature on the rheological behavior of worm-like micelles in a nonionic surfactant system consisting of polyoxyethylene (10) phytosterol (PhyEO(10))/glyceryl monocaprylate (GFA-C(8))/Water. First, the phase diagram of a PhyEO(10)/GFA-C(8)/Water system was examined when the weight ratio, R, of GFA-C(8) to the total surfactants was changed keeping the total concentration of the surfactants at 5 wt%. The formation of worm-like micelles was confirmed over a wide temperature range. Next, the effect of temperature on the rheological properties of the worm-like micelles was examined. From steady-flow viscosity measurements of the worm-like micelles, it was found that the zero-shear viscosity (eta(0)) gave a maximum value more than 1,000 times greater than the minimum value in the temperature range 20-50 degrees C. Further, the temperature at which the maximum eta(0) was observed decreased with increasing R value. These results indicate that there is an optimal temperature at which the entanglement of worm-like micelles is at its greatest. From dynamic viscoelasticity measurements, it was shown that the viscoelastic behavior observed for the worm-like micelles was consistent with the Maxwell model, which is the basic model for a viscoelastic body. In addition, the plateau modulus (G(0)), which reflects the volume fraction of entangled worm-like micelles, gradually increased with increasing temperature, while the relaxation time (tau), which reflects the disentanglement time of the worm-like micelles, rapidly decreased with increasing temperature. From these results, it was clarified that, for a nonionic worm-like micelle, tau influences the change in eta(0) more strongly than G(0).

  4. Acute toxicity of anionic and non-ionic surfactants to aquatic organisms.

    Science.gov (United States)

    Lechuga, M; Fernández-Serrano, M; Jurado, E; Núñez-Olea, J; Ríos, F

    2016-03-01

    The environmental risk of surfactants requires toxicity measurements. As different test organisms have different sensitivity to the toxics, it is necessary to establish the most appropriate organism to classify the surfactant as very toxic, toxic, harmful or safe, in order to establish the maximum permissible concentrations in aquatic ecosystems. We have determined the toxicity values of various anionic surfactants ether carboxylic derivatives using four test organisms: the freshwater crustacean Daphnia magna, the luminescent bacterium Vibrio fischeri, the microalgae Selenastrum capricornutum (freshwater algae) and Phaeodactylum tricornutum (seawater algae). In addition, in order to compare and classify the different families of surfactants, we have included a compilation of toxicity data of surfactants collected from literature. The results indicated that V. fischeri was more sensitive to the toxic effects of the surfactants than was D. magna or the microalgae, which was the least sensitive. This result shows that the most suitable toxicity assay for surfactants may be the one using V. fischeri. The toxicity data revealed considerable variation in toxicity responses with the structure of the surfactants regardless of the species tested. The toxicity data have been related to the structure of the surfactants, giving a mathematical relationship that helps to predict the toxic potential of a surfactant from its structure. Model-predicted toxicity agreed well with toxicity values reported in the literature for several surfactants previously studied. Predictive models of toxicity is a handy tool for providing a risk assessment that can be useful to establish the toxicity range for each surfactant and the different test organisms in order to select efficient surfactants with a lower impact on the aquatic environment. Copyright © 2015 Elsevier Inc. All rights reserved.

  5. Synthesis of nonionic reduced-sugar based bola amphiphiles and gemini surfactants with an alpha,omega-diamino-(oxa)alkyl spacer

    NARCIS (Netherlands)

    Wagenaar, Anno; Engberts, Jan B. F. N.

    2007-01-01

    Reduced-sugar based gemini surfactants with an alpha,omega-diamino-(oxa) alkyl spacer exhibit a rich pH-dependent aggregation behavior and are efficient DNA carriers in gene transfection. Herein, we describe an improved synthetic procedure for these amphiphiles. First, a series of novel nonionic

  6. On the characterization of host-guest complexes : Surface tension, calorimetry, and molecular dynamics of cyclodextrins with a non-ionic surfactant

    NARCIS (Netherlands)

    Pineiro, Angel; Banquy, Xavier; Perez-Casas, Silvia; Tovar, Edgar; Garcia, Abel; Villa, Alessandra; Amigo, Alfredo; Mark, Alan E.; Costas, Miguel

    2007-01-01

    Three host-guest systems have been characterized using surface tension (sigma), calorimetry, and molecular dynamics simulations (MD). The hosts were three native cyclodextrins (CD) and the guest the non-ionic carbohydrate surfactant octyl-beta-d-glucopyranoside. It is shown that, for any host-guest

  7. SALT-INDUCED TRANSITION FROM A MICELLAR TO A LAMELLAR LIQUID-CRYSTALLINE PHASE IN DILUTE MIXTURES OF ANIONIC AND NONIONIC SURFACTANTS IN AQUEOUS-SOLUTION

    NARCIS (Netherlands)

    SEIN, A; ENGBERTS, JBFN; VANDERLINDEN, E; VANDEPAS, JC

    In dilute mixtures of anionic surfactant, sodium dodecylbenzenesulfonate (NaDoBS), and nonionic poly(ethylene oxide) alkyl monoether (C13-15E(7)) a transition from a micellar to a lamellar phase is found at high salting-out electrolyte (NaCit) concentrations. With an increase of the salt

  8. Influence of molecular structure on the size, shape, and nanostructure of nonionic C(n)E(m) surfactant micelles.

    Science.gov (United States)

    Padia, Faheem N; Yaseen, Mohammed; Gore, Barbara; Rogers, Sarah; Bell, Gordon; Lu, Jian R

    2014-01-09

    Nonionic alkyl ethoxylates (C(n)E(m)) have been extensively studied for their adsorption, aggregation, and solubilization individually and in small groups. In this work, we report a more systematic study of the effects of alkyl chain (tail) and ethoxylate (head) length on the size, shape, and extent of intermixing within the C(n)E(m) micelles in aqueous solution. Data from small angle neutron scattering (SANS) and nuclear magnetic resonance (NMR) were combined to undertake the structural characterization of micelles formed from the two separate series of surfactants C(n)E6 (n = 10, 12, 14) and C12E(m) (m = 5, 6, 8, 10, 12). The micellar core volume (V(core)) could be well determined with reasonable accuracy and linked to the hydrophilic-lipophilic balance (HLB) of the surfactant, with a sharp size and shape transition occurring around HLB = 12.5. NOESY NMR results revealed protrusions of the terminal methylene groups into the ethoxylate shell, thus providing direct experimental evidence for the phenomenon of "roughness" or intermixing of the core-shell interface. These detailed studies are compared with previous investigations on this model surfactant system.

  9. Indication of critical micelle concentration of nonionic surfactants with large emission change using water-soluble conjugated polymer as molecular light switch

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Lilin, E-mail: sunlilin126@126.com [Anhui Key Laboratory of Chemo-Biosensing, College of Chemistry and Materials Science, Anhui Normal University, Wuhu 241000 (China); Hao, Dan; Zhang, Ping; Qian, Zhangsheng; Shen, Weili [Anhui Key Laboratory of Chemo-Biosensing, College of Chemistry and Materials Science, Anhui Normal University, Wuhu 241000 (China); Shao, Taili [Anhui Key Laboratory of Chemo-Biosensing, College of Chemistry and Materials Science, Anhui Normal University, Wuhu 241000 (China); Department of Pharmacy, Wannan Medical College, Wuhu 241000 (China); Zhu, Changqing, E-mail: zhucq@mail.ahnu.edu.cn [Anhui Key Laboratory of Chemo-Biosensing, College of Chemistry and Materials Science, Anhui Normal University, Wuhu 241000 (China)

    2013-02-15

    A new near-infrared water-soluble conjugated polymer, i.e. poly [2,5-di (propyloxysulfonate)-1,4-phenylene-ethynylene-9,10-anthrylene] (PPEASO3) was synthesized to investigate its interaction with surfactants. It was found that PPEASO3 has only a weak fluorescence emission at about 670 nm due to its self-aggregation in water and in aqueous solution containing a low concentration of nonionic surfactants, i.e. below their critical micelle concentration (CMC). However, a dramatic fluorescence enhancement with a large emission blue-shift (>40 nm) was found once the concentration of nonionic surfactants reached the CMC (especially for Triton X-100). An orange fluorescence could be observed even with naked-eyes under UV-lamp, which gave a direct indication for the micelle forming process and provided a simple method for the CMC determination of the nonionic surfactants. The CMC values determined by this method were in good agreement with those obtained by other techniques. The dramatic emission change observed could be ascribed to the intensive hydrophobic interaction between PPEASO3 and surfactants micelle, which greatly disrupts the aggregation of the polymer and increase the fluorescence efficiency of PPEASO3. Highlights: Black-Right-Pointing-Pointer Investigated the interaction of a new water-soluble conjugated polymer with surfactants. Black-Right-Pointing-Pointer The dramatic fluorescence enhancement and emission blue-shift were observed at the CMC. Black-Right-Pointing-Pointer The obvious emission color change could be observed with naked-eyes under UV-lamp. Black-Right-Pointing-Pointer Gave a direct indication for the micelle forming process. Black-Right-Pointing-Pointer Provided a simple method for the CMC determination of the nonionic surfactants.

  10. Surfactant effects on desorption rate of nonionic organic compounds from soils to water

    Science.gov (United States)

    Cesare, David Di; Smith, James A.

    1994-01-01

    The widespread occurrence of organic contamination in groundwater systems has become an important environmental concern. Of particular interest are nonionic organic compounds, which sorb strongly to natural soil as a result of their characteristic low aqueous solubilities and hydrophobic nature. Consequently, the remediation of nonionic organic contamination in groundwater systems is often highly dependent on contaminant desorption from the sorbed to aqueous phase. The kinetics of desorption will significantly influence the extraction efficiency of pump-and-treat remedial methods that are capable of removing only dissolved phase contaminants.

  11. Adsorption of nonionic surfactants on cellulose surfaces : adsorbed amounts and kinetics

    NARCIS (Netherlands)

    Torn, L.H.; Koopal, L.K.; Keizer, de A.; Lyklema, J.

    2005-01-01

    Kinetic and equilibrium aspects of three different poly(ethylene oxide) alkylethers (C12E5, C12E7, C14E7) near a flat cellulose surface are studied. The equilibrium adsorption isotherms look very similar for these surfactants, each showing three different regions with increasing surfactant

  12. Thinning of wetting films formed from aqueous solutions of non-ionic surfactant

    NARCIS (Netherlands)

    Elisseeva, O.V.; Fokkink, R.G.; Besseling, N.A.M.; Koopal, L.K.; Cohen Stuart, M.A.

    2006-01-01

    We investigated the thinning of wetting films formed from aqueous solution of non-ionic triblock copolymer Pluronic F127 on the surface of silica using a home-made thin film balance and time-resolved ellipsometry. Imaging ellipsometry was used to visualize the film structures at subsequent stages of

  13. Cloud point extraction for the determination of heavy metals by nonionic surfactant Triton X-100 and PAN

    International Nuclear Information System (INIS)

    Cabrera Puig, I.; Perez Gramatges, A.

    2006-01-01

    A novel methodology for extraction and preconcentration of trace metals based on cloud point phenomenon was applied to the analysis of Co(II), Cu(II), Cd(II), Pb(II) y Ni(II) in a certified reference material (CRM), using Triton X-100 as nonionic surfactant, and AAS for the determination. Different parameters that can influence the extraction efficiency were studied, such as pH and ionic strength of the solution. The precision, accuracy and detection limits of the method were determined using a CRM from the Environmental Analysis Laboratory of InSTEC. We applied our methodology to the detection of the metals in naturals waters (Almendares river and tap water) . The data obtained presented in this work is part of the validation file of the proposed analytical procedure for the determination of heavy metals

  14. Comparison of the physical characteristics of monodisperse non-ionic surfactant vesicles (NISV) prepared using different manufacturing methods.

    Science.gov (United States)

    Obeid, Mohammad A; Gebril, Ayman M; Tate, Rothwelle J; Mullen, Alexander B; Ferro, Valerie A

    2017-04-15

    Non-ionic surfactant vesicles (NISV) are synthetic membrane vesicles formed by self-assembly of a non-ionic surfactant, often in a mixture with cholesterol and a charged chemical species. Different methods can be used to manufacture NISV, with the majority of these requiring bulk mixing of two phases. This mixing process is time-consuming and leads to the preparation of large and highly dispersed vesicles, which affects the consistency of the final product and could hinder subsequent regulatory approval. In this study, we have compared the physical characteristics of NISV prepared using two conventional methods (thin-film hydration method and heating method) with a recently introduced microfluidic method. The resulting particles from these methods were assessed for their physical characteristics and in vitro cytotoxicity. Through microfluidics, nano-sized NISV were prepared in seconds, through rapid and controlled mixing of two miscible phases (lipids dissolved in alcohol and an aqueous medium) in a microchannel, without the need of a size reduction step, as required for the conventional methods. Stability studies over two months showed the particles were stable regardless of the method of preparation and there were no differences in terms of EC50 on A375 and A2780 cell lines. However, this work demonstrates the flexibility and ease of applying lab-on-chip microfluidics for the preparation of NISV that could be used to significantly improve formulation research and development, by enabling the rapid manufacture of a consistent end-product, under controlled conditions. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Cloud Point Extraction of Parabens Using Non-Ionic Surfactant with Cylodextrin Functionalized Ionic Liquid as a Modifier

    Directory of Open Access Journals (Sweden)

    Md Saleh Noorashikin

    2013-12-01

    Full Text Available A cloud point extraction (CPE process using non-ionic surfactant (DC193C to extract selected paraben compounds from water samples was investigated using reversed phase high performance liquid chromatography (RP-HPLC. The CPE process with the presence of β-cyclodextrin (βCD functionalized ionic liquid as a modifier (CPE-DC193C-βCD-IL is a new extraction technique that has been applied on the optimization of parameters, i.e., pH, βCD-IL concentration and phase volume ratio. This CPE-DC193C-βCD-IL method is facilitated at 30 °C, showing great losses of water content in the surfactant-rich phase, resulting in a high pre-concentration factor and high distribution coefficient. The developed method CPE-DC193C-βCD-IL did show enhanced properties compared to the CPE method without the modifier (CPE-DC193C. The developed method of CPE-DC193C-βCD-IL gives an excellent performance on the detection of parabens from water samples with the limit of detection falling in the range of 0.013–0.038 µg mL−1. Finally, the inclusion complex formation, hydrogen bonding, and π–π interaction between the βCD-IL, benzyl paraben (ArP, and DC 193C were proven using 1H NMR and 2D NOESY spectroscopy.

  16. Cloud Point Extraction of Parabens Using Non-Ionic Surfactant with Cylodextrin Functionalized Ionic Liquid as a Modifier

    Science.gov (United States)

    Noorashikin, Md Saleh; Raoov, Muggundha; Mohamad, Sharifah; Abas, Mhd Radzi

    2013-01-01

    A cloud point extraction (CPE) process using non-ionic surfactant (DC193C) to extract selected paraben compounds from water samples was investigated using reversed phase high performance liquid chromatography (RP-HPLC). The CPE process with the presence of β-cyclodextrin (βCD) functionalized ionic liquid as a modifier (CPE-DC193C-βCD-IL) is a new extraction technique that has been applied on the optimization of parameters, i.e., pH, βCD-IL concentration and phase volume ratio. This CPE-DC193C-βCD-IL method is facilitated at 30 °C, showing great losses of water content in the surfactant-rich phase, resulting in a high pre-concentration factor and high distribution coefficient. The developed method CPE-DC193C-βCD-IL did show enhanced properties compared to the CPE method without the modifier (CPE-DC193C). The developed method of CPE-DC193C-βCD-IL gives an excellent performance on the detection of parabens from water samples with the limit of detection falling in the range of 0.013–0.038 μg mL−1. Finally, the inclusion complex formation, hydrogen bonding, and π–π interaction between the βCD-IL, benzyl paraben (ArP), and DC 193C were proven using 1H NMR and 2D NOESY spectroscopy. PMID:24351832

  17. Comparison of the performance of non-ionic and anionic surfactants as mobile phase additives in the RPLC analysis of basic drugs.

    Science.gov (United States)

    Ruiz-Ángel, María J; García-Álvarez-Coque, María C

    2011-03-01

    Surfactants added to the mobile phases in reversed-phase liquid chromatography (RPLC) give rise to a modified stationary phase, due to the adsorption of surfactant monomers. Depending on the surfactant nature (ionic or non-ionic), the coated stationary phase can exhibit a positive net charge, or just change its polarity remaining neutral. Also, micelles in the mobile phase introduce new sites for solute interaction. This affects the chromatographic behavior, especially in the case of basic compounds. Two surfactants of different nature, the non-ionic Brij-35 and the anionic sodium dodecyl sulfate (SDS) added to water or aqueous-organic mixtures, are here compared in the separation of basic compounds (β-blockers and tricyclic antidepressants). The reversible/irreversible adsorption of the monomers of both surfactants on the stationary phase was examined. The changes in the nature of the chromatographic system using different columns and chromatographic conditions were followed based on the changes in retention and peak shape. The study revealed that Brij-35 is suitable for analyzing basic compounds of intermediate polarity, using "green chemistry", since the addition of an organic solvent is not needed and Brij-35 is a biodegradable surfactant. In contrast, RPLC with hydro-organic mixtures or mobile phases containing SDS required high concentrations of organic solvents. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Investigation on stabilization of CO2 foam by ionic and nonionic surfactants in presence of different additives for application in enhanced oil recovery

    Science.gov (United States)

    Kumar, Sunil; Mandal, Ajay

    2017-10-01

    Application of foam in upstream petroleum industry specifically in enhanced oil recovery (EOR) has gained significant interest in recent years. In view of this, an attempt has been paid to design the suitable foaming agents (foamer) by evaluating the influence of three surfactants, five nanoparticles and several additives. Experimental investigations have been carried out in order to examine the mechanism of foam generation in presence of sodium dodecyl sulfate (SDS), cetyltrimethylammonium bromide (CTAB) and polysorbate 80 (Tween 80) as anionic, cationic and nonionic surfactants by using the CO2 as gaseous component. It has been found that ionic surfactants show the higher foam life compared to nonionic surfactant. Out of different nano particles used, namely alumina (Al2O3) zirconium oxide (ZrO2), calcium carbonate (CaCO3), boron nitride (BN) and silica (SiO2), boron nitride shows the maximum improvement of foam stability. The foam stability of surfactant-nanoparticles foam is further increased by addition of different additives viz. polymer, alcohol and alkali. The results show that, the designed foaming solution have nearly 2.5 times higher half-decay time (t1/2) compared to the simple surfactant system. Finally, it has been found that gas injection rate plays an important role in obtaining a uniform and stabilized foam.

  19. Fluorine

    Science.gov (United States)

    Hayes, Timothy S.; Miller, M. Michael; Orris, Greta J.; Piatak, Nadine M.; Schulz, Klaus J.; DeYoung,, John H.; Seal, Robert R.; Bradley, Dwight C.

    2017-12-19

    Fluorine compounds are essential in numerous chemical and manufacturing processes. Fluorspar is the commercial name for fluorite (isometric CaF2), which is the only fluorine mineral that is mined on a large scale. Fluorspar is used directly as a fluxing material and as an additive in different manufacturing processes. It is the source of fluorine in the production of hydrogen fluoride or hydrofluoric acid, which is used as the feedstock for numerous organic and inorganic chemical compounds.The United States was the world’s leading producer of fluorspar until the mid-1950s. In the mid-1970s, the U.S. fluorspar mining industry began to decline because of foreign competition. By 1982, there was essentially only a single U.S. producer left, and that company ceased mining in 1996. Consumption of fluorspar in the United States peaked in the early 1970s, which was also the peak period of U.S. steel production. Since then, U.S. fluorspar consumption has decreased substantially; the United States has nonetheless increased its imports of downstream fluorine compounds, such as, in order of tonnage imported, hydrofluoric acid, aluminum fluoride, and cryolite. This combination of no U.S. production (until recently) and high levels of consumption has made the United States the world’s leading fluorspar-importing country, in all its various forms.The number of fluorspar-exporting countries has decreased substantially in recent decades, and, as a result, the United States has become dependent on just a few countries to supply its needs. In 2013, the United States imported the majority of its fluorspar from three countries, which were, in descending order of the amount imported, Mexico, China, and South Africa.Geologically, in igneous systems, fluorine is one of a number of elements that are “incompatible.” These incompatible elements become concentrated in the residual magma while the common silicates crystallize upon magma ascent and cooling, leading to relatively high

  20. Synergetic effect of benzotriazole and non-ionic surfactant on copper chemical mechanical polishing in KIO{sub 4}-based slurries

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Liang [State Key Laboratory of Tribology, Tsinghua University, Beijing 100084 (China); Center for Advanced Materials Processing, Clarkson University, Potsdam, NY 13699 (United States); He, Yongyong [State Key Laboratory of Tribology, Tsinghua University, Beijing 100084 (China); Niu, Xiangyu; Li, Yuzhuo [Center for Advanced Materials Processing, Clarkson University, Potsdam, NY 13699 (United States); Luo, Jianbin, E-mail: luojb@tsinghua.edu.cn [State Key Laboratory of Tribology, Tsinghua University, Beijing 100084 (China)

    2014-05-02

    Ruthenium will be integrated into copper interconnects as a barrier layer in the near future. During the chemical mechanical polishing process of the ruthenium barrier layer, copper polishing performance with barrier slurries is crucial to microchips' final performance. This paper mainly studies the synergetic effect of benzotriazole (BTA) and non-ionic surfactant on copper polishing performance using KIO{sub 4}-based barrier slurries. The results show that, the copper removal rate (RR) and static etching rate increase with increasing concentration of KIO{sub 4} due to the increasing proportion of the Cu–periodate and Cu–iodate compounds like Cu(IO{sub 4}){sub 2} and Cu(IO{sub 3}){sub 2} of the passivating film on the copper surface; the added BTA can further enhance the copper RR instead of suppressing it probably due to the formation of incomplete Cu–BTA thin film. It is demonstrated that the combination of BTA and non-ionic surfactant exhibits excellent performance in suppressing the copper RR to about 200 Å/min, realizing satisfactory copper surface quality and achieving desirable material removal rate selectivity among copper, ruthenium and low-κ dielectrics. The synergetic passivation mechanism of BTA and non-ionic surfactant on the copper surface was investigated. It is proposed that in the presence of KIO{sub 4} as an oxidizer, the added BTA and non-ionic surfactant can form a porous passivating film on the copper surface which is mainly composed of the Cu–BTA complex, the adsorbed non-ionic surfactant and the leftover insoluble copper compounds like Cu(IO{sub 4}){sub 2} and Cu(IO{sub 3}){sub 2}, and then the hydrophobic polypropylene oxide segments of non-ionic surfactant can be effectively absorbed on the hydrophobic Cu–BTA complex as a supplement. The above two parts are integrated into a complete passivating film to protect the copper surface from chemical dissolution and excessive mechanical abrasion. - Highlights: • The copper

  1. Front-face fluorescence spectroscopy study of globular proteins in emulsions: displacement of BSA by a nonionic surfactant.

    Science.gov (United States)

    Rampon, V; Genot, C; Riaublanc, A; Anton, M; Axelos, M A V; McClements, D J

    2003-04-23

    The displacement of a globular protein (bovine serum albumin, BSA) from the surface of oil droplets in concentrated oil-in-water emulsions by a nonionic surfactant (polyoxyethylene sorbitan monolauarate, Tween 20) was studied using front-face fluorescence spectroscopy (FFFS). This method relies on measurement of the change in intensity (I(MAX)) and wavelength (lambda(MAX)) of the maximum in the tryptophan emission spectrum. A series of oil-in-water emulsions (21 wt % n-hexadecane, 0.22 wt % BSA, pH 7.0) containing different molar ratios of Tween 20 to BSA (R = 0-131) were prepared. As the surfactant concentration was increased, the protein was progressively displaced from the droplet surfaces. At R > or = 66, the protein was completely displaced from the droplet surfaces. There was an increase in both I(MAX) and lambda(MAX) with increasing Tween 20 concentration up to R = 66, which correlated with the increase in the ratio of nonadsorbed to adsorbed protein. In contrast, there was a decrease in I(MAX) and lambda(MAX) with Tween 20 concentration in protein solutions and for R > or = 66 in the emulsions, which was attributed to binding of the surfactant to the protein. This study shows that FFFS is a powerful technique for nondestructively providing information about the interfacial composition of droplets in concentrated protein-stabilized emulsions in situ. Nevertheless, in general the suitability of the technique may also depend on protein type and the nature of the physicochemical matrix surrounding the proteins.

  2. The modulation of haemolytic activity of non-ionic surfactants by oil ...

    African Journals Online (AJOL)

    Microemulsions are thermodynamically stable, clear, transparent fluid dispersions of oil, water, and surfactant, but may include a cosurfactant typically a short chain alcohol. The unique properties of microemulsions make them suitable candidates as vehicles for improving parenteral drug delivery. In the present study, we ...

  3. Investigation of a novel fluorinated surfactant-based system for the design of spherical wormhole-like mesoporous silica.

    Science.gov (United States)

    Riachy, Philippe; Lopez, Gérald; Emo, Mélanie; Stébé, Marie-José; Blin, Jean-Luc; Ameduri, Bruno

    2017-02-01

    In contrast to hydrogenated based systems that led to many studies, fluorinated surfactants have been little reported. Thanks to their high chemical and thermal stability, these compounds are considered as suitable candidates for the synthesis of porous materials with an enhanced hydrothermal stability. This study reports the synthesis of a new fluorinated surfactant, 2-trifluoromethyl-7,7,8,8,9,9,10,10,11,11,12,12,12-tridecafluoro-4-thia-1-dodecanoic acid (FSC) obtained from the thiol-ene radical addition of 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluoro-1-octanethiol onto 2-trifluoromethyl acrylic acid in 85% yield. In the aim of achieving micelles in water to design mesoporous materials according to the cooperative templating mechanism, FSC was modified with water-soluble telechelic diamine (Jeffamine) ED-600. The modified surfactant was deeply characterized by spectroscopic methods and the FSC-Jeffamine ED-600 micellar system was used as porogen to prepare mesoporous materials via the cooperative templating mechanism. Spherical wormhole-like mesostructured silica materials of high specific surface area (850m 2 /g) and homogeneous pore size distribution (ca. 3.4nm) were obtained by conveniently adjusting the porogen/silica molar ratio and the hydrothermal conditions. Copyright © 2016 Elsevier Inc. All rights reserved.

  4. Sorption of a nonionic surfactant Tween 80 by minerals and soils

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Soyoung, E-mail: soyoung@pusan.ac.kr; Jeong, Hoon Young, E-mail: hjeong@pusan.ac.kr

    2015-03-02

    Highlights: • Tween 80 sorption varies significantly among soil minerals. • Sorption mechanisms and atomic compositions explain to mineral-specific sorption. • Clay minerals and SOM in soils are the key contributors to Tween 80 sorption. • Hysteresis suggests the potential difficulty in removing residual surfactants. - Abstract: Batch experiments were conducted to evaluate Tween 80 sorption by oxides, aluminosilicates, and soils. For oxides, the sorption by silica and alumina follow linear isotherms, and that by hematite follows a Langmuir isotherm. Considering isotherm type and surface coverage, Tween 80 may partition into the silica/alumina–water interface, whereas it may bind to hematite surface sites. Among aluminosilicates, montmorillonite shows the greatest sorption due to the absorption of Tween 80 into interlayers. For other aluminosilicates, it sorbs to surfaces, with the sorption increasing as plagioclase < vermiculite < kaolinite. This results from the relative reactivity among surface sites: ≡NaOH, ≡CaOH << ≡SiOH < ≡AlOH. Experiments using dry- and wet-sieved soils reveal that fine-grained clay minerals, difficult to separate by dry-sieving, contribute significantly to Tween 80 sorption. The greater sorption by untreated soils than H{sub 2}O{sub 2}-treated soils indicates that soil organic matter is a vital sorbent. The sorption hysteresis, contributed to by clay minerals and soil organic matter, is characterized by the greater sorption during the desorption than the sorption stages. This suggests the potential difficulty in removing surfactants from soils. Also, sorption of surfactants can adversely affect surfactant-enhanced remediation by decreasing the aquifer permeability and the availability of surfactants for micellar solubilization.

  5. Communication: Salt-induced water orientation at a surface of non-ionic surfactant in relation to a mechanism of Hofmeister effect

    Energy Technology Data Exchange (ETDEWEB)

    Hishida, Mafumi; Kaneko, Yohei; Okuno, Masanari; Yamamura, Yasuhisa; Ishibashi, Taka-aki; Saito, Kazuya, E-mail: kazuya@chem.tsukuba.ac.jp [Department of Chemistry, Faculty of Pure and Applied Sciences, University of Tsukuba, Tsukuba, Ibaraki 305-8571 (Japan)

    2015-05-07

    The behavior of water molecules at the surface of nonionic surfactant (monomyristolein) and effects of monovalent ions on the behavior are investigated using the heterodyne-detected vibrational sum frequency generation spectroscopy. It is found that water molecules at the surface are oriented with their hydrogen atoms pointing to the bulk, and that the degree of orientation depends on the anion strongly but weakly on the cation. With measured surface potentials in those saline solutions, it is concluded that the heterogeneous distribution of anions and cations in combination with the nonionic surfactant causes the water orientation. This heterogeneous distribution well explains the contrasting order of anions and cations with respect to the ion size in the Hofmeister series.

  6. Nonviral gene-delivery by highly fluorinated gemini bispyridinium surfactant-based DNA nanoparticles.

    Science.gov (United States)

    Fisicaro, Emilia; Compari, Carlotta; Bacciottini, Franco; Contardi, Laura; Pongiluppi, Erika; Barbero, Nadia; Viscardi, Guido; Quagliotto, Pierluigi; Donofrio, Gaetano; Krafft, Marie Pierre

    2017-02-01

    Biological and thermodynamic properties of a new homologous series of highly fluorinated bispyridinium cationic gemini surfactants, differing in the length of the spacer bridging the pyridinium polar heads in 1,1' position, are reported for the first time. Interestingly, gene delivery ability is closely associated with the spacer length due to a structural change of the molecule in solution. This conformation change is allowed when the spacer reaches the right length, and it is suggested by the trends of the apparent and partial molar enthalpies vs molality. To assess the compounds' biological activity, they were tested with an agarose gel electrophoresis mobility shift assay (EMSA), MTT proliferation assay and Transient Transfection assays on a human rhabdomyosarcoma cell line. Data from atomic force microscopy (AFM) allow for morphological characterization of DNA nanoparticles. Dilution enthalpies, measured at 298K, enabled the determination of apparent and partial molar enthalpies vs molality. All tested compounds (except that with the longest spacer), at different levels, can deliver the plasmid when co-formulated with 1,2-dioleyl-sn-glycero-3-phosphoethanolamine (DOPE). The compound with a spacer formed by eight carbon atoms gives rise to a gene delivery ability that is comparable to that of the commercial reagent. The compound with the longest spacer compacts DNA in loosely condensed structures by forming bows, which are not suitable for transfection. Regarding the compounds' hydrogenated counterparts, the tight relationship between the solution thermodynamics data and their biological performance is amazing, making "old" methods the foundation to deeply understanding "new" applications. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Synthesis of non-ionic surfactants based on alkylene diamine and evaluation of their corrosion inhibition efficiency on carbon steel in formation water

    Directory of Open Access Journals (Sweden)

    A.M. Al-Sabagh

    2017-03-01

    Full Text Available The inhibitive effects of newly synthesized non-ionic surfactant based on alkylene diamine surfactants on X-65 carbon steel in formation water was investigated by means of electrochemical techniques and quantum chemical study. These derivatives were characterized by FT-IR, and the surface tension and thermodynamic parameters were calculated. The polarization showed that the inhibition efficiency of the prepared compounds was increased with increasing the length of the internal alkyl chain between the two terminal amino groups of diamine. The electronic properties obtained using quantum chemical approach were correlated with the experimental inhibition efficiencies. The surface morphology of carbon steel was investigated using SEM.

  8. Controlled synthesis of La1−xSrxCrO3 nanoparticles by hydrothermal method with nonionic surfactant and their ORR activity in alkaline medium

    International Nuclear Information System (INIS)

    Choi, Bo Hyun; Park, Shin-Ae; Park, Bong Kyu; Chun, Ho Hwan; Kim, Yong-Tae

    2013-01-01

    Graphical abstract: We demonstrate that Sr-doped LaCrO 3 nanoparticles were successfully prepared by the hydrothermal synthesis method using the nonionic surfactant Triton X-100 and the applicability of La 1−x Sr x CrO 3 to oxygen reduction reaction (ORR) electrocatalysis in an alkaline medium. Compared with the nanoparticles synthesized by the coprecipitation method, they showed enhanced ORR activity. - Highlights: • Sr-doped LaCrO 3 nanoparticles were successfully prepared by the hydrothermal method using the nonionic surfactant. • Homogeneously shaped and sized Sr-doped LaCrO 3 nanoparticles were readily obtained. • Compared with the nanoparticles synthesized by the coprecipitation method, they showed an enhanced ORR activity. • The main origin was revealed to be the decreased particle size due to the nonionic surfactant. - Abstract: Sr-doped LaCrO 3 nanoparticles were prepared by the hydrothermal method with the nonionic surfactant Triton X-100 followed by heat treatment at 1000 °C for 10 h. The obtained perovskite nanoparticles had smaller particle size (about 100 nm) and more uniform size distribution than those synthesized by the conventional coprecipitation method. On the other hand, it was identified with the material simulation that the electronic structure change by Sr doping was negligible, because the initially unfilled e g -band was not affected by the p-type doping. Finally, the perovskite nanoparticles synthesized by hydrothermal method showed much higher ORR activity by over 200% at 0.8 V vs. RHE than those by coprecipitation method

  9. The effect of ionic and non-ionic surfactants on the growth, nitrate reductase and nitrite reductase activities of Spirodela polyrrhiza (L. Schleiden

    Directory of Open Access Journals (Sweden)

    Józef Buczek

    2014-01-01

    Full Text Available Inclusion into the medium of 5 mg•dm-3 of non-ionic (ENF or ionic (DBST surfactant caused 50-60% inhibition of nitrite reductase MR activity in S. polyrrhiza. At the same time, increased accumulation of NO2- in the plant tissues and lowering of the total and soluble protein contents were found. DBST also lowered the nitrate reductase (NR activity and the dry mass of the plants.

  10. Mixtures of nonionic and anionic surfactants: interactions with low-molecular-mass homopeptides

    Czech Academy of Sciences Publication Activity Database

    Forgács, E.; Cserháti, T.; Deyl, Zdeněk; Mikšík, Ivan; Eckhardt, Adam

    2001-01-01

    Roč. 917, 1-2 (2001), s. 287-295 ISSN 0021-9673 R&D Projects: GA ČR GV203/96/K128; GA ČR GA203/99/0191; GA ČR GA203/00/D032 Institutional research plan: CEZ:AV0Z5011922 Keywords : molecular interactions * regression analysis * surfactants Subject RIV: BH - Optics, Masers, Lasers Impact factor: 2.793, year: 2001

  11. Adsorption parameters and phase behaviour of non-ionic surfactants at liquid interfaces.

    Science.gov (United States)

    Slavchov, Radomir Iliev; Ivanov, Ivan Boyanov

    2017-11-29

    A reasonable adsorption model is one that allows all adsorption parameters (adsorption constant, hard-disc area α, attraction parameter β) of a surfactant at a liquid interface to be predicted accurately as a function of the molecular structure and medium conditions. However, the established adsorption models of van der Waals and Frumkin lead to inconsistencies, such as negative β at water|oil, α significantly larger than the crystallographic area of the molecule, and phase behaviour that contradicts the experimental observations. Several less popular models that are better suited for liquid interfaces are investigated. It is shown that the sticky disc model agrees with the observed adsorption behaviour of several homologous series of surfactants, both at water|air and water|oil interfaces. The area α is independent of the interface and agrees within 6% to what follows from collapse and crystallographic data. A model of the lateral attraction is proposed, from which it follows that β has a strongly non-linear dependence on the hydrocarbon chain length, the area of the head group and the temperature. Using the model of β, experimental data, and the law of corresponding states, the critical point of the adsorbed layer could be determined. Depending on the value of β, the adsorption behaviour of the surfactants at liquid interfaces can be classified into distinct categories: cohesive or non-cohesive, based on their Boyle points (where β = 2), and sub-critical or super-critical, based on their critical points (where β = 38.1).

  12. Performance evaluation of non-ionic surfactant based tazarotene encapsulated proniosomal gel for the treatment of psoriasis.

    Science.gov (United States)

    Prasad, Vure; Chaurasia, Sundeep

    2017-10-01

    The study aims to explore the potential of non-ionic surfactant based proniosomal gel (PNG) in improving the topical delivery of tazarotene by in vitro and in vivo studies. The PNG was prepared using coacervation phase separation method composed of span, stearylamine, cholesterol, and lecithin. The PNG demonstrated favorable vesicle size (3.26±0.22μm) and percent encapsulation efficiency (49.50±2.3%). The PNG was evaluated for viscosity which indicated that the ratio of span:cholesterol:stearylamine (64.5:30.5:5mM) demonstrated no any fluctuations in viscosity. The scanning electron micrographs exhibited spherical vesicles with sharp boundaries. The in vitro drug release through cellulose membrane and rat's skin were found to be in the following order of the formulation code A2>A4>A3>A5 and A4>A2>A3>A5, respectively, which showed the prolonged release of entrapped tazarotene. Further, in vitro drug permeation and retention studies revealed that formulations A2 and A4 showed the higher percent of drug permeation whereas formulations A3 and A5 showed the higher percent of drug retention through rat's skin. Moreover, PNG A2 and A4 formulations demonstrated good stability characteristics at different temperature conditions. The stability in the presence of detergent revealed that no any abrupt change in turbidity. The skin irritation studies performed with formulations A2 and A4 showed no erythema compared with the plain PNG. The male Albino NMRI mice tail model was used to performed in vivo skin histological examination which revealed that an increase in the orthokeratosis strengthened. Thus, all the results concluded that surfactant, Span 60 based PNG formulations have shown a good ability to increase drug accumulation in the various skin layers and more potential carrier for topical delivery of tazarotene for an effective therapy of psoriasis. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Effect of protic ionic liquids (PILs) on the formation of non-ionic dodecyl poly(ethylene oxide) surfactant self-assembly structures and the effect of these surfactants on the nanostructure of PILs.

    Science.gov (United States)

    Greaves, Tamar L; Mudie, Stephen T; Drummond, Calum J

    2011-12-07

    The ability of a series of non-ionic dodecyl poly(ethylene oxide) surfactants to form micelles in a variety of protic ionic liquids (PILs) was investigated using small and wide angle X-ray scattering (SAXS/WAXS). The C(12)E(n) surfactants with n = 3-8 were examined in PILs which contained either an ethyl, diethyl, triethyl, butyl, pentyl, ethanol or pentanol-ammonium cation in conjunction with either a nitrate or formate anion. The ability of the PILs to support micelles of these surfactants was highly dependent on their liquid nanostructure. The PILs containing hydroxyl groups on the cations were not nanostructured and had very low surfactant solubility (surfactant solubility, but due to the greater hydrocarbon solubility they had insufficient drive from the "solvophobic effect" to enable micelle formation. The PILs of ethylammonium nitrate (EAN), propylammonium nitrate (PAN), diethylammonium formate (DEAF) and triethylammonium formate (TEAF) had smaller non-polar domains, and all supported micelle formation below 20 wt% surfactant. The critical micelle concentration (CMC) of surfactants in EAN were two orders of magnitude greater than in water. The minimum molecular areas of the poly(ethylene oxide) head groups at the air/ionic liquid interface, A(min), were significantly larger in EAN than in water. The SAXS patterns from the micelles present in EAN fitted well to ellipsoids, whereas the micelles present in PAN fitted well to spheres. The nanostructure of select PILs was also influenced by the presence of surfactants.

  14. Formulation of Nonionic Surfactant Vesicles (NISV) Prepared by Microfluidics for Therapeutic Delivery of siRNA into Cancer Cells.

    Science.gov (United States)

    Obeid, Mohammad A; Elburi, Ashref; Young, Louise C; Mullen, Alexander B; Tate, Rothwelle J; Ferro, Valerie A

    2017-07-03

    Small interfering RNAs (siRNA) have a broad potential as therapeutic agents to reversibly silence any target gene of interest. The clinical application of siRNA requires the use of safe and effective delivery systems. In this study, we investigated the use of nonionic surfactant vesicles (NISV) for the delivery of siRNA. Different types of NISV formulations were synthesized by microfluidic mixing and then evaluated for their physiochemical properties and cytotoxicity. The ability of the NISV to carry and transfect siRNA targeting green fluorescent protein (GFP) into A549 that stably express GFP (copGFP-A549) was evaluated. Flow cytometry and Western blotting were used to study the GFP expression knockdown, and significant knockdown was observed as a result of siRNA delivery to the cells by NISV. This occurred in particular when using Tween 85, which was able to achieve more than 70% GFP knockdown. NISV were thus demonstrated to provide a promising and effective platform for therapeutic delivery of siRNA.

  15. Synthesis and Characterization of Encapsulated Nanosilica Particles with an Acrylic Copolymer by in Situ Emulsion Polymerization Using Thermoresponsive Nonionic Surfactant

    Directory of Open Access Journals (Sweden)

    Daryoosh Vashaee

    2013-08-01

    Full Text Available Nanocomposites of encapsulated silica nanoparticles were prepared by in situ emulsion polymerization of acrylate monomers. The synthesized material showed good uniformity and dispersion of the inorganic components in the base polymer, which enhances the properties of the nanocomposite material. A nonionic surfactant with lower critical solution temperature (LCST was used to encapsulate the silica nanoparticles in the acrylic copolymer matrix. This in situ method combined the surface modification and the encapsulation in a single pot, which greatly simplified the process compared with other conventional methods requiring separate processing steps. The morphology of the encapsulated nanosilica particles was investigated by dynamic light scattering (DLS and transmission electron microscopy (TEM, which confirmed the uniform distribution of the nanoparticles without any agglomerations. A neat copolymer was also prepared as a control sample. Both the neat copolymer and the prepared nanocomposite were characterized by Fourier transform infrared spectroscopy (FTIR, thermal gravimetric analyses (TGA, dynamic mechanical thermal analysis (DMTA and the flame resistance test. Due to the uniform dispersion of the non-agglomerated nanoparticles in the matrix of the polymer, TGA and flame resistance test results showed remarkably improved thermal stability. Furthermore, DMTA results demonstrated an enhanced storage modulus of the nanocomposite samples compared with that of the neat copolymer, indicating its superior mechanical properties.

  16. Preparation of stable tea seed oil nano-particle emulsions by a low energy method with non-ionic surfactants

    Directory of Open Access Journals (Sweden)

    M. Kanlayavattanakul

    2017-06-01

    Full Text Available Tea seed oil nano-particle emulsions were prepared. Non-ionic surfactants containing Tween 80 and Span 80 (1:1, w/w were mixed with propanol (3-9:1, w/w to give Smix, which was thereafter mixed with tea seed oil. The mixture was titrated with water at 150 rpm to give clear or bluish and bluish-white emulsions. Twelve nano-particle emulsions with 64.64 to 72.73% Smix, 16.66 to 27.27% oil and 9.09 to 16.67% water with particle sizes between 207.00 to 430.10 nm, PDI of 0 to 0.4, ζ-potential of -42.00 to -49.63 mV, pH of 7.04 to 7.32 and 151.33 to 241.93 cps, were stable following an accelerated stability test and long term storage at room temperature and 4 and 45 ºC for 90 days, although one system (16.66% oil and 66.67% Smix was separated. This nano-particle emulsion formulation is concise and feasible for an industrial development of topical products containing tea seed oil.

  17. Confinement of a nonionic surfactant membrane within a montmorillonite as a new way to prepare organoclay materials

    Energy Technology Data Exchange (ETDEWEB)

    Guegan, Regis, E-mail: regis.guegan@univ-orleans.fr [Universite d' Orleans (France); Giovanela, Marcelo [Universidade de Caxias do Sul (UCS), RS (Brazil)

    2016-11-15

    The aim of this study was to prepare and characterize a hybrid layered material (organoclay) with a Na-montmorillonite and the triethylene glycol mono-n-decyl ether (C{sub 10}E{sub 3} ) nonionic surfactant which forms a lamellar phase at room temperature. The synthesized organoclay was characterized by complementary techniques (Fourier transform infrared spectroscopy and X-ray diffraction). Experiments in conjunction with electron density analysis showed that a bilayer or membrane of C{sub 10}E{sub 3} was intercalated within the interlayer space of a naturally exchanged Na-montmorillonite. The intercalation of a bilayer of C{sub 10}E{sub 3} in a clay mineral offers new perspectives for the manufacturing of nanomaterials. While showing a hydrophobic surface and a large interlayer space value, the resulting organoclay preserves the compensating cations within the interlayer space allowing one to perform ion exchanges, making easier the intercalation of further organic molecules of important size with functional properties or for environmental purposes. (author)

  18. Inhibitory effect of non-ionic surfactants of the TRITON-X series on the corrosion of carbon steel in sulphuric acid

    International Nuclear Information System (INIS)

    Fuchs-Godec, R.

    2007-01-01

    The corrosion inhibition characteristics of non-ionic surfactants of the TRITON-X series, known as TRITON-X-100 and TRITON-X-405, on stainless steel (SS) type X4Cr13 in sulphuric acid were investigated by potentiodynamic polarisation measurements. It was found that these surfactants act as good inhibitors of the corrosion of stainless steel in 2 mol L -1 H 2 SO 4 solution, but the inhibition efficiency strongly depends on the electrode potential. The polarisation data showed that the non-ionic surfactants used in this study acted as mixed-type inhibitors and adsorb on the stainless steel surface, in agreement with the Flory-Huggins adsorption isotherm. Calculated ΔG ads values are -57.79 kJ mol -1 for TRITON-X-100, and -87.5 kJ mol -1 for TRITON-X-405. From the molecular structure it can be supposed that these surfactants adsorb on the metal surface through two lone pairs of electrons on the oxygen atoms of the hydrophilic head group, suggesting a chemisorption mechanism

  19. The application of density functional theory to the analysis of small-angle neutron scattering of concentrated microemulsion with nonionic surfactant

    International Nuclear Information System (INIS)

    Korneta, W.; Lopez Quintela, M.A.; Liz, L.

    1993-09-01

    The experimental results obtained by the static small-angle neutron scattering technique for the microemulsion consisting of 40% in volume of nonionic surfactant pentaethylene-glycol-4-octylphenylether, equal volumes of heavy water and decane, and additives (the salt KCl, the anionic surfactant SDS and butanol) are presented and discussed. The universal features of obtained scattering intensity plots are determined. The shape of the peak present in all scattering spectra was fitted by the universal function derived from the density functional theory. The persistence length of surfactant sheet used in many density functional theories of microemulsions is determined and the effect of different additives on this length is shown. (author). 10 refs, 2 figs

  20. Environmentally evaluated HPLC-ELSD method to monitor enzymatic synthesis of a non-ionic surfactant.

    Science.gov (United States)

    Gaber, Yasser; Akerman, Cecilia Orellana; Hatti-Kaul, Rajni

    2014-01-01

    N-Lauroyl-N-methylglucamide is a biodegradable surfactant derived from renewable resources. In an earlier study, we presented an enzymatic solvent-free method for synthesis of this compound. In the present report, the HPLC method developed to follow the reaction between lauric acid/methyl laurate and N-methyl glucamine (MEG) and its environmental assessment are described. Use of ultraviolet (UV) absorption or refractive index (RI) detectors did not allow the detection of N-methyl glucamine (MEG). With Evaporative light scattering detector ELSD, it was possible to apply a gradient elution, and detect MEG with a limit of detection, LOD = 0.12 μg. A good separation of the peaks: MEG, lauric acid, product (amide) and by-product (amide-ester) was achieved with the gradient program with a run time of 40 min. The setting of ELSD detector was optimized using methyl laurate as the analyte. LC-MS/MS was used to confirm the amide and amide-ester peaks. We evaluated the greenness of the developed method using the freely available software HPLC-Environmental Assessment Tool (HPLC-EAT) and the method got a scoring of 73 HPLC-EAT units, implying that the analytical procedure was more environmentally benign compared to some other methods reported in literature whose HPLC-EAT values scored up to 182. Use of ELSD detector allowed the detection and quantification of the substrates and the reaction products of enzymatic synthesis of the surfactant, N-lauroyl-N-methylglucamide. The developed HPLC method has acceptable environmental profile based on HPLC-EAT evaluation.

  1. Nanoparticle self-assembly in mixtures of phospholipids with styrene/maleic acid copolymers or fluorinated surfactants

    Science.gov (United States)

    Vargas, Carolyn; Arenas, Rodrigo Cuevas; Frotscher, Erik; Keller, Sandro

    2015-12-01

    Self-assembling nanostructures in aqueous mixtures of bilayer-forming lipids and micelle-forming surfactants are relevant to in vitro studies on biological and synthetic membranes and membrane proteins. Considerable efforts are currently underway to replace conventional detergents by milder alternatives such as styrene/maleic acid (SMA) copolymers and fluorinated surfactants. However, these compounds and their nanosized assemblies remain poorly understood as regards their interactions with lipid membranes, particularly, the thermodynamics of membrane partitioning and solubilisation. Using 19F and 31P nuclear magnetic resonance spectroscopy, static and dynamic light scattering, and isothermal titration calorimetry, we have systematically investigated the aggregational state of a zwitterionic bilayer-forming phospholipid upon exposure to an SMA polymer with a styrene/maleic acid ratio of 3 : 1 or to a fluorinated octyl phosphocholine derivative called F6OPC. The lipid interactions of SMA(3 : 1) and F6OPC can be thermodynamically conceptualised within the framework of a three-stage model that treats bilayer vesicles, discoidal or micellar nanostructures, and the aqueous solution as distinct pseudophases. The exceptional solubilising power of SMA(3 : 1) is reflected in very low membrane-saturating and solubilising polymer/lipid molar ratios of 0.10 and 0.15, respectively. Although F6OPC saturates bilayers at an even lower molar ratio of 0.031, this nondetergent does not solubilise lipids even at >1000-fold molar excess, thus highlighting fundamental differences between these two types of mild membrane-mimetic systems. We rationalise these findings in terms of a new classification of surfactants based on bilayer-to-micelle transfer free energies and discuss practical implications for membrane-protein research.Self-assembling nanostructures in aqueous mixtures of bilayer-forming lipids and micelle-forming surfactants are relevant to in vitro studies on biological and

  2. Formulation and characterisation of self-microemulsifying drug delivery systems based on biocompatible nonionic surfactants

    Directory of Open Access Journals (Sweden)

    Đekić Ljiljana M.

    2014-01-01

    Full Text Available Development of self-dispersing drug delivery systems (SMEDDS is a modern strategy for oral delivery improvement of poorly soluble drugs. Self-microemulsifying drug delivery systems (SMEDDS are isotropic mixtures of oils and hydrophilic surfactants, which form oil-in-water (o/w microemulsions by dilution in aqueous media (e.g., gastrointestinal fluids. Formulation of SMEDDS carriers requires consideration of a large number of formulation parameters and their influences on process of self-microemulsifying and releasing of drug. The aim of this work was formulation and characterisation of SMEDDS for oral administration of ibuprofen. In the experimental work, two series of potential SMEDDS were prepared (M1-M10, using surfactant (Labrasol®, Gattefosse, cosurfactant (PEG-40 hydrogenated castor (Cremophor® RH40, and oil (medium chain triglycerides (Crodamol® GTCC and olive oil (Cropur® Olive, at surfactant-to-cosurfactant mass ratios (Km 9:1, 7:3, 5:5, 3:7, and 1:9, and 10 % or 20 % of the oil phase. Ibuprofen was dissolved in formulations in concentration of 10 %. Characterisation of the investigated formulations included evaluation of physical stability, self-microemulsification ability in 0,1M HCl (pH 1.2 and phosphate buffer pH 7.2 (USP and in vitro drug release. Formation of o/w microemulsions with the average droplet size (Z-ave up to 100 nm, was observed in dispersions of formulations prepared with 10% w/w of medium chain triglycerides, within the entire investigated range of the Km values (M1-M5. These formulations were selected as SMEDDS. Results of characterisation pointed out the importance of the type and concentration of the oil as well as the Km value for the self-microemulsying ability as well as drug release kinetics from the investigated SMEDDS. Ibuprofen relase was in accordance with the request of USP 30-NF 25 (at least 80 %, after 60 min from the formulations M1 (Km 9:1 and M5 (Km 1:9. Furthermore, ibuprofen release was

  3. Preliminary studies of the toxic effects of non-ionic surfactants derived from lysine.

    Science.gov (United States)

    Macián, M; Seguer, J; Infante, M R; Selve, C; Vinardell, M P

    1996-01-08

    The toxic effects of new synthetic monodisperse non-ionic long-chain N alpha, N epsilon-diacyl lysine polyoxyethylene glycol amide compounds with a structural resemblance to natural lecithin phospholipids were studied by the haemolytic method and the test of the chorioallantoic membrane of the hen's egg (HET-CAM). The following compounds were tested: symmetrical N alpha,N epsilon-diacyl lysine homologues (N alpha,N epsilon-dihexanoyl, N alpha,N epsilon-dioctanoyl and N alpha,N epsilon-didecanoyl lysine) with one methyl ether polyoxyethylene glycol chain of different oxyethylene units (dioxyethylene glycol, tetraoxyethylene glycol and hexaoxyethylene glycol) as headgroup; symmetrical N alpha,N epsilon-diacyl lysine homologues with two methyl ether dioxyethylene glycol chains and the asymmetrical N alpha-butanoyl, N epsilon-dodecyl lysine with two hydrophilic methyl ether dioxyethylene glycol chains as headgroup. A commercial (polydisperse) oleoyl polyoxyethylene glycol diethanolamide with an average of eight units of ethylene oxide was used as control. All the synthesized tested compounds appeared to be less haemolytic and less irritant than the control. The synthesized products were studied with regard to their hydrophobic and hydrophilic chains in order to evaluate the influence of their structure on their haemolytic and irritative action. The results of this study show that the acyl chain distribution of these compounds greatly influence toxic effects: the asymmetrical compound N alpha-butanoyl,N epsilon-dodecyl lysine-bis[methyl ether diethylene glycol]amide was found to be the most haemolytic and irritating compound. Among the symmetrical homologues, the shortest-chain compounds N alpha,N epsilon-dihexanoyl lysine methyl ether polyoxyethylene glycol amides present the least haemolytic and irritating activity, independently of the number and length of the hydrophilic methyl ether polyoxyethylene glycol chains. Taking into account their surface activity

  4. Coil-Globule Transition of PNIPAM in Non-Ionic Surfactant Mesophase

    Science.gov (United States)

    Jijo, V. J.; Sharma, K. P.; Mathew, R.; Rajamohanan, P. R.; Guruswamy, K.

    2010-03-01

    We investigate the Coil-Globule transition of linear poly N-isopropylacrylamide (PNIPAM) in the hexagonal (H1) mesophase of a non ionic surfactant, C12E9 in water, by Turbidimetry, NMR and SAXS. For aqueous PNIPAM, the LCST (coil-globule transition temperature), TPNIPAM, is 35 C, whereas the H1 phase transitions to a micellar phase at a temperature, THI, of 45 C. As PNIPAM is added to the C12E9/H2O system; depending on the ratio of C12E9:H2O, TPNIPAM changes. It is observed that at 42wt% of C12E9 (viz. 58wt% water; micellar phase), the TPNIPAM is 33 C. At 44wt% of C12E9 (viz. 56wt% water), the H1 phase forms and the the coil-globule transition for PNIPAM starts at 28 C. For 50wt% C12E9, the transition starts from 13 C and for 60wt% C12E9 in water, PNIPAM does not even shows the phase transition even as below as 5 C. It is observed using optical microscopy that the PNIPAM is trapped at the domain boundaries of the H1 phase. The decrease in the coil globule transition temperature, TPNIPAM, is not only because of the hydrophobic interactions but also due to the competition between polymer and C12E9 for water in the H1 phase. The inability of PNIPAM to become a complete globule at higher temperature may be due to the adsorption of C12E9.

  5. DDT uptake by arbuscular mycorrhizal alfalfa and depletion in soil as influenced by soil application of a non-ionic surfactant

    International Nuclear Information System (INIS)

    Wu Naiying; Zhang Shuzhen; Huang Honglin; Shan Xiaoquan; Christie, Peter; Wang Youshan

    2008-01-01

    A greenhouse pot experiment was conducted to investigate the colonization of alfalfa roots by the arbuscular mycorrhizal (AM) fungus Glomus etunicatum and application of the non-ionic surfactant Triton X-100 on DDT uptake by alfalfa and depletion in soil. Mycorrhizal colonization led to an increase in the accumulation of DDT in roots but a decrease in shoots. The combination of AM inoculation and Triton X-100 application enhanced DDT uptake by both the roots and shoots. Application of Triton X-100 gave much lower residual concentrations of DDT in the bulk soil than in the rhizosphere soil or in the bulk soil without Triton X-100. AM colonization significantly increased bacterial and fungal counts and dehydrogenase activity in the rhizosphere soil. The combined AM inoculation of plants and soil application of surfactant may have potential as a biotechnological approach for the decontamination of soil polluted with DDT. - Combined colonization of alfalfa roots by an arbuscular mycorrhizal fungus and addition of non-ionic surfactant to the soil promoted root and shoot uptake and soil dissipation of DDT

  6. Surface active properties and biological activity of novel nonionic surfactants containing pyrimidines and related nitrogen heterocyclic ring systems

    Directory of Open Access Journals (Sweden)

    El-Sayed, R.

    2008-06-01

    Full Text Available A series of annelated pyrimidine derivatives has been synthesized via different heterocyclization reactions of suitably functionalized 6-(4-octadecyloxyphenyl-4-oxo-2- thioxo-1,2,3,4-tetrahydropyrimidine-5-carbonitrile (4 with different electrophiles and nucleophiles. These heterocycles bear an active hydrogen atom (NH, OH or COOH which could be propoxylated using propylene oxide with different moles, 5, 10 and 15, to produce nonionic surfactant having a long alkyl chain with molecular weight suitable for becoming an amphiphilic molecule with correct hydrophilic-lypophilic balance which enhances solubility, biodegradability and hence lowers the toxicity to human beings and becomes environmentally friendly. In addition, the antimicrobial activities of these compounds were screened and it was found that some of these compounds have similar or higher activity compared with commercial antibiotic drugs (sulphadiazine, which make them suitable for diverse applications like the manufacturing of drugs, pesticides, emulsifiers, cosmetics, etc.Una serie de derivados pirimidínicos y relacionados han sido preparados vía diferentes reacciones de formación de heterociclos entre 6-(4-octadeciloxifenil-4-oxo-2-tioxo- 1,2,3,4-tetrahidropirimidina-5-carbonitrilo (4 y diferentes electrófilos y nucleófilos. Estos heterociclos tienen un átomo de hidrógeno activo (NH, OH, o COOH que fue propoxilado con diferentes moles de óxido de propileno (5, 10, o 15 para producir surfactantes no iónicos con una cadena alquílica larga y peso molecular apropiado para convertirse en una molécula anfifílica con un balance hidrofílico-lipofílico correcto que aumenta la solubilidad y la biodedradabilidad, decrece la toxicidad a los seres humanos, y se convierte en respetuoso con el medio ambiente. Además, las actividades antimicrobianas de estos compuestos fueron determinadas y se encontró que algunos de estos compuestos tuvieron una actividad similar o más alta que

  7. The in vitro characterisation and biodistribution of some non-ionic surfactant coated liposomes in the rabbit.

    Science.gov (United States)

    Khattab, M A; Farr, S J; Taylor, G; Kellaway, I W

    1995-01-01

    The degree of adsorption of some novel silicone glycol copolymers onto polystyrene microspheres was studied and compared with the sorption onto small unilamellar vesicles (SUVs) composed of egg phosphatidylcholine (EPC) and prepared by the detergent dialysis technique. These non-ionic surfactants are 'comb' polymers of the ABn type where A is a silicone chain with n pendant polyglycol chains (B). Photon correlation spectroscopy was used to measure the adsorbed layer thickness (delta h) following polymer sorption from aqueous solutions. delta h on latex particles was a function of the length of the polymer hydrophilic chains. Upon incubation with SUVs, delta h of the different polymers was similar (3 nm) and significantly less (two sample t-test, p coated with the silicone polymer possessing the highest glycol content and the longest ethylene oxide chains. Sterically stabilised vesicles were also formed by coating dipalmitoyl phosphatidyl-choline (DPPC)/cholesterol (Chol) (molar ratio 1:1) with two of these silicone glycol copolymers and Poloxamer 338. The liposomes were labelled with 67gallium-desferrioxamine (67Ga-DF). Incubation of radiolabelled Poloxamer 338-coated vesicles in saline or serum at 37 degrees C for 24 h resulted in less stable liposomes compared to the more stable non-coated or silicone coated vesicles. Following intravenous (i.v.) administration in rabbits, free 67Ga-DF rapidly disappeared from the circulation (half-life = 41.4 min) and accumulated in the bladder. Two populations of vesicles were prepared (136 +/- 2.9 nm and 100 +/- 1.4 nm). 24 h after i.v. injection of the different formulations of the 100 nm liposomes in rabbits, 20-27% of the activity was retained in blood. The silicone polymer with the highest glycol content and the longest ethylene oxide chains showed the longest half-life (21.4 h). Using gamma scintigraphy, the liver/spleen uptake of the 136 nm non-coated vesicles was 57% which was significantly reduced to 37% upon coating

  8. Effect of various surfactants (cationic, anionic and non-ionic) on the growth of Aspergillus parasiticus (NRRL 2999) in relation to aflatoxin production.

    Science.gov (United States)

    Tanuja, Kosuri; Hemalatha, K; Karuna, Rupula; Sashidhar Rao, B

    2010-08-01

    The effect of surfactants (two cationic, one anionic and three non-ionic) at 0.001, 0.01, 0.1 and 1.0 % concentrations on aflatoxin production, ergosterol content and sugar consumption by Aspergillus parasiticus (NRRL 2999) in YES liquid culture medium is reported. At 0.01% concentration, the cationic surfactants, cetyl dimethyl ammonium bromide (CDAB) and dodecyl trimethyl ammonium bromide (DTAB), and the anionic surfactant, sodium dodecyl sulfate (SDS), completely inhibited spore germination, while DTAB also inhibited the production of ergosterol and toxin (p lauryl ether (Brij-35) and ethoxylated p-tert-octylphenol (Triton X-100) delayed the spore germination up to day 5 at all concentrations and inhibited toxin and ergosterol production at 0.001% concentration. The affect was found to be dose-dependent from 0.001% to 1%, for Triton X-100 only. Positive correlation between ergosterol content and toxin production in the presence of different surfactants at various time periods (3, 5, 7, 9 and 12 days) was found. Tween-20 was most effective in inhibiting toxin production on day 7, when aflatoxin production was found to be maximal in control group. Sugar consumption was directly proportional to the ergosterol content, showing a significant correlation with aflatoxin production.

  9. HPLC/ESI-quadrupole ion trap mass spectrometry for characterization and direct quantification of amphoteric and nonionic surfactants in aqueous samples

    Science.gov (United States)

    Levine, Lanfang H.; Garland, Jay L.; Johnson, Jodie V.

    2002-01-01

    An amphoteric (cocamidopropylbetaine, CAPB) and a nonionic (alcohol polyethoxylate, AE) surfactant were characterized by electrospray ionization quadrupole ion trap mass spectrometry (ESI-MS) as to their homologue distribution and ionization/fragmentation chemistry. Quantitative methods involving reversed-phase gradient HPLC and (+)ESI-MSn were developed to directly determine these surfactants in hydroponic plant growth medium that received simulated graywater. The predominant homologues, 12 C alkyl CAPB and 9 EO AE, were monitored to represent the total amount of the respective surfactants. The methods demonstrated dynamic linear ranges of 0.5-250 ng (r2 > 0.996) for CAPB and 8-560 ng (r2 > 0.998) for AE homologue mixture, corresponding to minimum quantification limits of 25 ppb CAPB and 0.4 ppm AE with 20-microL injections. This translated into an even lower limit for individual components due to the polydispersive nature of the surfactants. The procedure was successfully employed for the assessment of CAPB and AE biodegradation in a hydroponic plant growth system used as a graywater bioreactor.

  10. Determination of non-ionic and anionic surfactants in industrial products by separation on a weak ion-exchanger, derivatization and liquid chromatography.

    Science.gov (United States)

    Ripoll-Seguer, L; Beneito-Cambra, M; Herrero-Martínez, J M; Simó-Alfonso, E F; Ramis-Ramos, G

    2013-12-13

    A method for the determination of priority surfactants, including fatty alcohol ethoxylates (FAE), alkylether sulfates (AES) and linear alkylbenzene sulfonates (LAS) is described. The samples were diluted with 50% methanol at pH 4 prior to solid-phase extraction on a weak anionic exchanger (WAX). The AES and LAS surfactant classes were retained, whereas the non-ionic components, including most FAE oligomers were eluted. After washing the WAX cartridge to remove cations, the remaining hydrophobic FAE oligomers were eluted using hot 80% methanol at pH 4 (at ca. 50°C). These two eluates were combined to constitute the non-ionic fraction. Then, AES and LAS were eluted using 80% MeOH with 3M NH3 followed by 95% methanol with 0.75M NH3. The two eluates obtained in basic media were combined to constitute the anionic fraction. The solvents were evaporated, the residues were dissolved in 1,4-dioxane, and esterification of the alcohols and transesterification of AES with phthalic anhydride was performed. Separation of the derivatized oligomers was achieved by gradient elution on a C8 column with acetonitrile/water in the presence of 0.1% acetic acid and 0.1M NaClO4. The chromatogram of the non-ionic fraction showed the peaks of the resolved FAE oligomers. The chromatogram of the anionic fraction showed the peaks of the LAS homologues well resolved from those of the AES oligomers. The method was applied to laundry and industrial cleaners, shampoos and a shower gel. Copyright © 2013 Elsevier B.V. All rights reserved.

  11. High-resolution Kendrick Mass Defect Analysis of Poly(ethylene oxide)-based Non-ionic Surfactants and Their Degradation Products.

    Science.gov (United States)

    Fouquet, Thierry; Shimada, Haruo; Maeno, Katsuyuki; Ito, Kanako; Ozeki, Yuka; Kitagawa, Shinya; Ohtani, Hajime; Sato, Hiroaki

    2017-09-01

    Matrix assisted laser desorption ionization (MALDI) high-resolution mass spectrometry (HRMS) and the recently introduced high-resolution Kendrick mass defect (HRKMD) analysis are combined to thoroughly characterize non-ionic surfactants made of a poly(ethylene oxide) (PEO) core capped by esters of fatty acids. A PEO monostearate surfactant is first analyzed as a proof of principle of the HRKMD analysis conducted with a fraction of EO as the base unit (EO/X with X being an integer) in lieu of EO for a regular KMD analysis. Data visualization is greatly enhanced and the distributions detected in the MALDI mass spectrum are assigned to a pristine (H, OH)-PEO as well as mono- and di-esterified PEO chains with palmitate and stearate end-groups in HRKMD plots computed with EO/45. The MALDI-HRMS/HRKMD analysis is then successfully applied to the more complex case of ethoxylated hydrogenated castor oil (EHCO) found to contain a large number of hydrogenated ricinoleate moieties (up to 14) in its HRKMD plot computed with EO/43, departing from the expected triglyceride structure. The exhaustiveness of the MALDI-HRMS/HRKMD strategy is validated by comparing the so-obtained fingerprints with results from alternative techniques (electrospray ionization MS, size exclusion and liquid adsorption chromatography, ion mobility spectrometry). Finally, aged non-ionic surfactants formed upon hydrolytic degradation are analyzed by MALDI-HRMS/HRKMD to easily assign the degradation products and infer the associated degradation routes. In addition to the hydrolysis of the ester groups observed for EHCO, chain scissions and new polar end-groups are observed in the HRKMD plot of PEO monostearate arising from a competitive oxidative ageing.

  12. Synthesis and characterization of anionic/nonionic surfactant-interceded iron-doped TiO{sub 2} to enhance sorbent/photo-catalytic properties

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Ajit; Lee, Byeong-Kyu, E-mail: bklee@ulsan.ac.kr

    2015-09-15

    We investigated the synthesis, characterization, and application of surfactant-interceded Fe nanoparticle-doped TiO{sub 2} (TiO{sub 2}/Fe-S1 and TiO{sub 2}/Fe-S2) that were used as adsorbents and photo-catalysts for the removal of As(V) ions from aqueous media. Two types of surfactant (anionic (sodium dodecyl sulfate), S1 and non-ionic (Triton X-100), S2) were used to obtain the separation and mono-dispersion of Fe(III) ions in the reaction solution. The nanocomposites were characterized by Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), UV–vis, scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX) and elemental mapping analysis before and after As(V) removal. The Langmuir capacities (q{sub e}, mg/g) of the sodium dodecyl sulfate (SDS) and Triton X-100 interceded nanocomposites (TiO{sub 2}/Fe-S1 and TiO{sub 2}/Fe-S2, respectively) for arsenic removal were determined to be 65.79 and 50.76 mg/g, respectively, in aqueous media with As(V) concentration ranges of 0–10 mg/L at pH 6.5. - Highlights: • Fe(III) doped TiO{sub 2} nanocomposite was prepared with surfactant. • Anionic surfactant SDS enhanced the transfer of Fe(III) ions to TiO{sub 2}. • Surfactant-interceded nanocomposite enhanced As(V) removal. • Arsenic removal efficiency was as follows: dark phase>visible phase>UV region.

  13. The effect of the non-ionic surfactant Brij 30 on the cytotoxicity of adriamycin in monolayer, spheroid and clonogenic culture systems.

    Science.gov (United States)

    Kerr, D J; Wheldon, T E; Russell, J G; Maurer, H R; Florence, A T; Halbert, G W; Freshney, R I; Kaye, S B

    1987-09-01

    The effects of a non-ionic polyoxyethylated lauryl ether surfactant (Brij 30) on monolayer uptake and spheroid penetration of adriamycin have been studied. Co-incubation of adriamycin with Brij 30 increases intracellular adriamycin levels by 2-3-fold. Although, in the concentrations used, Brij 30 alone is not cytotoxic, adriamycin and Brij 30 mixtures are significantly more cytotoxic (monolayer ID90 = 0.6 microgram/ml; disaggregated spheroid ID50 = 1.9 micrograms/ml) and induce significantly longer spheroid growth delay than adriamycin alone (monolayer ID90 = 2.1 micrograms/ml; disaggregated spheroid ID50 = 3.3 micrograms/ml). Adriamycin is equally cytotoxic to mouse normal granulocytes and chronic myeloid leukaemic (M1 cell line) cells in agar clonogenic cultures. The addition of Brij 30 appears to enhance preferentially the activity of adriamycin against these tumour cells relative to the normal granulocytes.

  14. Effect of nonionic surfactants in release media on accelerated in-vitro release profile of sirolimus eluting stents with biodegradable polymeric coating

    Directory of Open Access Journals (Sweden)

    Ami Raval

    2018-02-01

    Full Text Available It is a well-known fact that sirolimus (SRL undergoes degradation process via hydrolysis in aqueous media, leading to incorrect assessment of drug amount and thus release characteristics of formulations. The main objective of the present study was to evaluate the effect of nonionic surfactants in media on in-vitro release profiles for sirolimus eluting stents (SES coated with biodegradable polymeric matrix. Phosphate buffer and acetate buffer incorporating nonionic surfactants with varying concentrations were examined for adequate solubility and stability (by RP-HPLC. Good sink condition was achieved in phosphate buffer (at pH 4.0 with 1.0% Tween 20, 1.0% Brij 35% and 0.5% Brij 58. Hydrodynamic size (by DLS and the micelle-water partition coefficient (P with standard free energy of solubilization (∆Gs° of drug were evaluated to get some understanding about the solubilization phenomena. About 80% of drug release during the period of 48 h was achieved in optimized drug release media which was 1.0% Tween 20 in phosphate buffer pH 4.0. The obtained accelerated SRL release profile in optimized medium correlated well with the real time in-vitro release in phosphate buffer (pH 7.4. Surface morphology changes (by SEM, changes in gravimetric weights and molecular weight change (by GPC were examined before and after drug release to understand the drug release mechanism which explains that the polymer did not undergo degradation during the drug release.

  15. Simultaneous quantification of poly-dispersed anionic, amphoteric and nonionic surfactants in simulated wastewater samples using C18 high-performance liquid chromatography-quadrupole ion-trap mass spectrometry

    Science.gov (United States)

    Levine, Lanfang H.; Garland, Jay L.; Johnson, Jodie V.

    2005-01-01

    This paper describes the development of a guantitative method for direct and simultaneous determination of three frequently encountered surfactants, amphoteric (cocoamphoacetate, CAA), anionic (sodium laureth sulfate, SLES), and nonionic (alcohol ethoxylate, AE) using a reversed-phase C18 HPLC coupled with an ESI ion-trap mass spectrometer (MS). Chemical composition, ionization characteristics and fragmentation pathways of the surfactants are presented. Positive ESI was effective for all three surfactants in agueous methanol buffered with ammonium acetate. The method enables rapid determinations in small sample volumes containing inorganic salts (up to 3.5 g L(-1)) and multiple classes of surfactants with high specificity by applying surfactant specific tandem mass spectrometric strategies. It has dynamic linear ranges of 2-60, 1.5-40, 0.8-56 mg L(-1) with R2 egual or greater than 0.999, 0.98 and 0.999 (10 microL injection) for CAA, SLES, and AE, respectively.

  16. Layer-by-Layer Assembly of Fluorine-Free Polyelectrolyte-Surfactant Complexes for the Fabrication of Self-Healing Superhydrophobic Films.

    Science.gov (United States)

    Wu, Mengchun; An, Ni; Li, Yang; Sun, Junqi

    2016-11-29

    Fluorine-free self-healing superhydrophobic films are of significance for practical applications because of their extended service life and cost-effective and eco-friendly preparation process. In this study, we report the fabrication of fluorine-free self-healing superhydrophobic films by layer-by-layer (LbL) assembly of poly(sodium 4-styrenesulfonate) (PSS)-1-octadecylamine (ODA) complexes (PSS-ODA) and poly(allylamine hydrochloride) (PAH)-sodium dodecyl sulfonate (SDS) (PAH-SDS) complexes. The wettability of the LbL-assembled PSS-ODA/PAH-SDS films depends on the film structure and can be tailored by changing the NaCl concentration in aqueous dispersions of PSS-ODA complexes and the number of film deposition cycles. The freshly prepared PSS-ODA/PAH-SDS film with micro- and nanoscaled hierarchical structures is hydrophilic and gradually changes to superhydrophobic in air because the polyelectrolyte-complexed ODA and SDS surfactants tend to migrate to the film surface to cover the film with hydrophobic alkyl chains to lower its surface energy. The large amount of ODA and SDS surfactants loaded in the superhydrophobic PSS-ODA/PAH-SDS films and the autonomic migration of these surfactants to the film surface endow the resultant superhydrophobic films with an excellent self-healing ability to restore the damaged superhydrophobicity. The self-healing superhydrophobic PSS-ODA/PAH-SDS films are mechanically robust and can be deposited on various flat and nonflat substrates. The LbL assembly of oppositely charged polyelectrolyte-surfactant complexes provides a new way for the fabrication of fluorine-free self-healing superhydrophobic films with satisfactory mechanical stability, enhanced reliability, and extended service life.

  17. Degradation of PAH in a creosote-contaminated soil. A comparison between the effects of willows (Salix viminalis), wheat straw and a nonionic surfactant.

    Science.gov (United States)

    Hultgren, Jenny; Pizzul, Leticia; Castillo, María del Pilar; Granhall, Ulf

    2010-01-01

    The degradation of polyaromatic hydrocarbons (PAH) in an aged creosote-contaminated soil in the presence of Salix viminalis was investigated in a greenhouse experiment. Phenanthrene and pyrene were degraded 100% and 80%, respectively, in the presence of plants but only 68% and 63% without plants. The effects of the nonionic surfactant Triton X-100 or the addition of straw, without plants, were also studied. The addition of straw had no effect on PAH degradation compared to the control Pyrene degradation with Triton X-100 at low concentrations (0.06 microl g(-1) DW) was comparable to that with plants but was less for anthracene and phenanthrene. The treatments with plants were, according to SIR measurements, dominated by active microorganisms (98.8% of the biomass), whereas all treatments without plants contained mostly dormant or non-growing microorganisms (1.7-2.0% active). Viable counts and active biomass were highly correlated in all treatments and demonstrated that S. viminalis greatly increased microbial populations. Dominant bacteria were grouped according to Gram, fluorescence and oxidase tests and revealed differences between treatments. The presence of S. viminalis or the surfactant enhanced PAH degradation, primarily by a rhizosphere effect on the microbial activity in the former case and by increased bioavailability in the latter case.

  18. Discrete Fractional Component Monte Carlo Simulation Study of Dilute Nonionic Surfactants at the Air-Water Interface.

    Science.gov (United States)

    Yoo, Brian; Marin-Rimoldi, Eliseo; Mullen, Ryan Gotchy; Jusufi, Arben; Maginn, Edward J

    2017-09-26

    We present a newly developed Monte Carlo scheme to predict bulk surfactant concentrations and surface tensions at the air-water interface for various surfactant interfacial coverages. Since the concentration regimes of these systems of interest are typically very dilute (≪10 -5 mol. frac.), Monte Carlo simulations with the use of insertion/deletion moves can provide the ability to overcome finite system size limitations that often prohibit the use of modern molecular simulation techniques. In performing these simulations, we use the discrete fractional component Monte Carlo (DFCMC) method in the Gibbs ensemble framework, which allows us to separate the bulk and air-water interface into two separate boxes and efficiently swap tetraethylene glycol surfactants C 10 E 4 between boxes. Combining this move with preferential translations, volume biased insertions, and Wang-Landau biasing vastly enhances sampling and helps overcome the classical "insertion problem", often encountered in non-lattice Monte Carlo simulations. We demonstrate that this methodology is both consistent with the original molecular thermodynamic theory (MTT) of Blankschtein and co-workers, as well as their recently modified theory (MD/MTT), which incorporates the results of surfactant infinite dilution transfer free energies and surface tension calculations obtained from molecular dynamics simulations.

  19. Self-assembly thermodynamics of pH-responsive amino-acid-based polymers with a nonionic surfactant

    Czech Academy of Sciences Publication Activity Database

    Bogomolova, Anna; Keller, S.; Klingler, J.; Sedlak, M.; Rak, D.; Šturcová, Adriana; Hrubý, Martin; Štěpánek, Petr; Filippov, Sergey K.

    2014-01-01

    Roč. 30, č. 38 (2014), s. 11307-11318 ISSN 0743-7463 R&D Projects: GA MŠk(CZ) LH14292 Grant - others:AV ČR(CZ) M200501201 Program:M Institutional support: RVO:61389013 Keywords : polymer * surfactant * thermodynamics Subject RIV: CC - Organic Chemistry Impact factor: 4.457, year: 2014

  20. Controlled synthesis of La{sub 1−x}Sr{sub x}CrO{sub 3} nanoparticles by hydrothermal method with nonionic surfactant and their ORR activity in alkaline medium

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Bo Hyun; Park, Shin-Ae [Energy System Major, School of Mechanical Engineering, Pusan National University, Busan 609-735 (Korea, Republic of); Park, Bong Kyu [GIFT Center, Pusan National University, Busan, 609-735 (Korea, Republic of); Chun, Ho Hwan, E-mail: chunahh@pusan.ac.kr [Global Core Research Center for Ships and Offshore Plants(GCRC-SOP), Pusan National University, Busan, 609-735 (Korea, Republic of); Kim, Yong-Tae, E-mail: yongtae@pusan.ac.kr [Energy System Major, School of Mechanical Engineering, Pusan National University, Busan 609-735 (Korea, Republic of)

    2013-10-15

    Graphical abstract: We demonstrate that Sr-doped LaCrO{sub 3} nanoparticles were successfully prepared by the hydrothermal synthesis method using the nonionic surfactant Triton X-100 and the applicability of La{sub 1−x}Sr{sub x}CrO{sub 3} to oxygen reduction reaction (ORR) electrocatalysis in an alkaline medium. Compared with the nanoparticles synthesized by the coprecipitation method, they showed enhanced ORR activity. - Highlights: • Sr-doped LaCrO{sub 3} nanoparticles were successfully prepared by the hydrothermal method using the nonionic surfactant. • Homogeneously shaped and sized Sr-doped LaCrO{sub 3} nanoparticles were readily obtained. • Compared with the nanoparticles synthesized by the coprecipitation method, they showed an enhanced ORR activity. • The main origin was revealed to be the decreased particle size due to the nonionic surfactant. - Abstract: Sr-doped LaCrO{sub 3} nanoparticles were prepared by the hydrothermal method with the nonionic surfactant Triton X-100 followed by heat treatment at 1000 °C for 10 h. The obtained perovskite nanoparticles had smaller particle size (about 100 nm) and more uniform size distribution than those synthesized by the conventional coprecipitation method. On the other hand, it was identified with the material simulation that the electronic structure change by Sr doping was negligible, because the initially unfilled e{sub g}-band was not affected by the p-type doping. Finally, the perovskite nanoparticles synthesized by hydrothermal method showed much higher ORR activity by over 200% at 0.8 V vs. RHE than those by coprecipitation method.

  1. EVALUATION OF THE USEFULNESS OF CONTINUOUS FLOW ANALYSIS FOR THE STUDY OF ANIONIC SURFACTANTS AND NONIONIC SURFACTANTS IN WATER AND SEWAGE SAMPLES

    Directory of Open Access Journals (Sweden)

    Aleksandra Strugała-Wilczek

    2014-10-01

    Established methods show low limit of detection, good precision and good correctness. The described full automatic method takes effect in short-time analysis, small sample volume required for testing and waste restriction. Proposed flow injection system comply with requirements and may be successfully applied in monitoring studies as well as in the routine laboratory analysis. Rapid determination of water and waste water quality by the SFA for the content of surfactants allows an adequate response in case of exceeding the permissible concentrations, even according to the most restricted requirements.

  2. Formulation design and characterization of a non-ionic surfactant based vesicular system for the sustained delivery of a new chondroprotective agent

    Directory of Open Access Journals (Sweden)

    Muhammad Imran Khan

    2015-09-01

    Full Text Available Diacerein is used for symptomatic relief and cartilage regeneration in osteoarthritis. Due to gastrointestinal side effects, poor aqueous solubility and low bioavailability, its clinical usage has been restricted. The objective of the present study was to enhance its dissolution profile and to attain sustained release by designing a novel delivery system based on niosomes. Five niosomal formulations (F1-F5 with non-ionic surfactant (sorbitan monostearate and cholesterol in varying ratios of 5:5, 6:4, 7:3, 8:2 and 9:1 were developed by the reverse-phase evaporation technique. The size and polydispersivity index (PDI were found in the range of 0.608 µm to 1.010 µm and 0.409 to 0.781, respectively. Scanning electron microscopy (SEM of the selected formulation (F3 revealed spherical vesicles, and 79.8% entrapment was achieved with F3 (7:3. Dissolution studies using the dialysis method showed sustained release behaviour for all formulations. The optimized surfactant-to-cholesterol concentration (7:3 in formulation F3sustained the drug-release time (T50% up to 10 hours. Kinetic modelling exhibited a zero-order release (R2=0.9834 and the release exponent 'n' of the Korsmayer-Peppas model (n=0.90 confirmed non-fickian and anomalous release. The results of this study suggest that diacerein can be successfully entrapped into niosomes using sorbitan monostearate and that these niosomes have the potential to deliver diacerein efficiently at the absorption site.

  3. Colloid and surfactant

    International Nuclear Information System (INIS)

    Kuk, Yun Hwan; Lee, Jeong Jung; Cho, Sun Chae; Ryeo, Su Dong

    1995-08-01

    This book consists of two parts about colloid and surfactant. The first parts has explanations colloid and surface science, which deal with creation and properties of colloidal particles, surfactant and micelle colloid, property of surfactant, membranes, absorption of surface science, electrokinetic phenomenon, emulsion, foam and rheology. The second part mentions surfactant on anionic surfactant with five types, amphoteric surface active agent, non-ionic surface active agent and use of surfactant.

  4. Monitoring corrosion and corrosion control of iron in HCl by non-ionic surfactants of the TRITON-X series - Part III. Immersion time effects and theoretical studies

    International Nuclear Information System (INIS)

    Amin, Mohammed A.; Ahmed, M.A.; Arida, H.A.; Kandemirli, Fatma; Saracoglu, Murat; Arslan, Taner; Basaran, Murat A.

    2011-01-01

    Graphical abstract: . Display Omitted Research highlights: → The inhibition effect of TX-100, TX-165 and TX-305 on iron corrosion in 1.0 M HCl was studied. → TX-305 inhibited iron corrosion more effectively than TX-100 and TX-165. → In most cases, inhibition efficiency increased with time during the first 60 min of immersion, then decreased. → Calculated quantum chemical parameters confirmed the experimental inhibition efficiencies of the tested surfactants. - Abstract: The inhibition performance of three selected non-ionic surfactants of the TRITON-X series, namely TRITONX-100 (TX-100), TRITON-X-165 (TX-165) and TRITON-X-305 (TX-305), on the corrosion of iron was studied in 1.0 M HCl solutions as a function of inhibitor concentration (0.01-0.20 g L -1 ) and immersion time (0.0-8 h) at 298 K. Measurements were conducted based on Tafel polarization, LPR and impedance studies. At high frequencies, the impedance spectrum showed a depressed capacitive loop in the complex impedance plane, whose diameter is a function of the immersion time and the type and concentration of the introduced surfactant. In all cases, an inductive loop was observed in the low frequency and this could be attributed to the adsorption behavior. The inhibition efficiency increased with immersion time, reached a maximum and then decreased. This was attributed to the orientation change of adsorbed surfactant molecules. TX-305 inhibited iron corrosion more effectively than TX-100 and TX-165. The frontier orbital energies, the energy gap between frontier orbitals, dipole moments (μ), charges on the C and O atoms, the polarizabilities, and the quantum chemical descriptors were calculated. The quantum chemical calculation results inferred that for the HOMO representing the condensed Fukui function for an electrophilic attack (f k + ), the contributions belong to the phenyl group and the oxygen atom attached to the phenyl group for each tested surfactant. Quantitative structure

  5. Electron beam irradiation of textile effluents and non-ionic ethoxylated surfactant for toxicity and color removal

    International Nuclear Information System (INIS)

    Sole, Stephanie V. Del; Garcia, Vanessa S.G.; Boiani, Nathalia F.; Rosa, Jorge M.; Andrade e Silva, Leonardo G. de; Borrely, Sueli I.

    2017-01-01

    Textile industry has an expressive scenario in the world economy and Brazil is the 5 th in the textile production. By 2015, Brazilian textile production represented US $ 39.3 billion, accounting for more than 1.8 million tons of fabric (ABIT, 2017). The effluents from textile industry are highlighted by quantity of wastewater discharged and variety of substances (dyes, bleaching agents, surfactants, salts, acids, among others). Such compounds often prove to be toxic to aquatic biota. This present study aims to assess toxicity of whole effluents, before and after irradiation (by electron beam accelerator, EBI). In addition, the reduction of the effluent color after irradiation is also very important. Daphnia similis and Vibrio fischeri were the biological systems applied for toxicity evaluations. Previous results demonstrated the surfactant as the main toxic compound, in the untreated and irradiated forms, EC 50 = 0.44 ppm ± 0.02 (untreated); EC 50 = 0.46 % ± 0.07 (irradiated). The irradiation was effective in reducing the color of the effluent, starting from 0.5 kGy. EB radiation may be proposed as an alternative treatment for the final effluent from textile processing, mainly for reuse purposes. (author)

  6. Electron beam irradiation of textile effluents and non-ionic ethoxylated surfactant for toxicity and color removal

    Energy Technology Data Exchange (ETDEWEB)

    Sole, Stephanie V. Del; Garcia, Vanessa S.G.; Boiani, Nathalia F.; Rosa, Jorge M.; Andrade e Silva, Leonardo G. de; Borrely, Sueli I., E-mail: vanessagranadeiro@gmail.com, E-mail: steh.vdsole@gmail.com, E-mail: jotarosa@hotmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); SENAI, Faculdade de Tecnologia Antoine Skaf, Sao Paulo, SP (Brazil)

    2017-11-01

    Textile industry has an expressive scenario in the world economy and Brazil is the 5{sup th} in the textile production. By 2015, Brazilian textile production represented US $ 39.3 billion, accounting for more than 1.8 million tons of fabric (ABIT, 2017). The effluents from textile industry are highlighted by quantity of wastewater discharged and variety of substances (dyes, bleaching agents, surfactants, salts, acids, among others). Such compounds often prove to be toxic to aquatic biota. This present study aims to assess toxicity of whole effluents, before and after irradiation (by electron beam accelerator, EBI). In addition, the reduction of the effluent color after irradiation is also very important. Daphnia similis and Vibrio fischeri were the biological systems applied for toxicity evaluations. Previous results demonstrated the surfactant as the main toxic compound, in the untreated and irradiated forms, EC 50 = 0.44 ppm ± 0.02 (untreated); EC 50 = 0.46 % ± 0.07 (irradiated). The irradiation was effective in reducing the color of the effluent, starting from 0.5 kGy. EB radiation may be proposed as an alternative treatment for the final effluent from textile processing, mainly for reuse purposes. (author)

  7. Enhanced photocatalytic degradation of norfloxacin in aqueous Bi{sub 2}WO{sub 6} dispersions containing nonionic surfactant under visible light irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Lin, E-mail: tanglin@hnu.edu.cn [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China); Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082 (China); Wang, Jiajia [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China); Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082 (China); Zeng, Guangming, E-mail: zgming@hnu.edu.cn [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China); Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082 (China); Liu, Yani; Deng, Yaocheng; Zhou, Yaoyu; Tang, Jing; Wang, Jingjing; Guo, Zhi [College of Environmental Science and Engineering, Hunan University, Changsha 410082 (China); Key Laboratory of Environmental Biology and Pollution Control (Hunan University), Ministry of Education, Changsha 410082 (China)

    2016-04-05

    Highlights: • TX100 strongly enhanced the adsorption and photodegradation of NOF in Bi{sub 2}WO{sub 6} dispersions under visible light irradiation (400–750 nm). • Cu{sup 2+} (10 mM) significantly suppressed the photocatalytic degradation of NOF. • FT-IR demonstrated that the NOF adsorbed on Bi{sub 2}WO{sub 6} was completely degraded. • Three possible photocatalytic degradation pathways of NOF were proposed, according to the HPLC/MS/MS analysis. - Abstract: Photocatalytic degradation is an alternative method to remove pharmaceutical compounds in water, however it is hard to achieve efficient rate because of the poor solubility of pharmaceutical compounds in water. This study investigated the photodegradation of norfloxacin in a nonionic surfactant Triton-X100 (TX100)/Bi{sub 2}WO{sub 6} dispersion under visible light irradiation (400–750 nm). It was found that the degradation of poorly soluble NOF can be strongly enhanced with the addition of TX100. TX100 was adsorbed strongly on Bi{sub 2}WO{sub 6} surface and accelerated NOF photodegradation at the critical micelle concentration (CMC = 0.25 mM). Higher TX100 concentration (>0.25 mM) lowered the degradation rate. In the presence of TX100, the degradation rate reached the maximum value when the pH value was 8.06. FTIR analyses demonstrated that the adsorbed NOF on the catalyst was completely degraded after 2 h irradiation. According to the intermediates identified by HPLC/MS/MS, three possible degradation pathways were proposed to include addition of hydroxyl radical to quinolone ring, elimination of piperazynilic ring in fluoroquinolone molecules, and replacement of F atoms on the aromatic ring by hydroxyl radicals.

  8. A study of correlations between the release of drugs from petrolatum-based gels containing nonionic surfactants and some physical and physico-chemical characteristics of the gel systems.

    Science.gov (United States)

    Colo, G D; Nannipieri, E; Serafini, M F; Vitale, D

    1986-06-01

    Synopsis The in vitro release of benzocaine and 2-ethyIhexyl p-di-methylaminobenzoate (EH-PABA) from petrolatum-based gels either containing two nonionic surfactants, or not, was compared with some physical and/or physico-chemical characteristics of the drugs, the gels and the drug-gel systems. The surfactants had no effect on the release of EH-PABA, the less polar drug, whereas they decreased the release of benzocaine. Moreover, the release data show a complex dependence of diffusive properties of ben-zocaine on drug and surfactant concentration. Benzocaine appears to form mixed micelles with each of the two surfactants and/or undergoes self-aggregation phenomena within surfactant micelles. The results indicate that drug diffusion is influenced by gel porosity, drug molecular size and polarity and molecular interactions. Etude des corrélations entre la disponibilité des medicaments dans les gels a base de vaseline contenant des surfactifs non ioniques et quelques propriétés physiques et physicochimiques des gels.

  9. Tensiometric, fluorescence and 1H NMR study of mixed micellization of non-steroidal anti-inflammatory drug sodium salt of ibuprofen in the presence of non-ionic surfactant in aqueous/urea solutions

    International Nuclear Information System (INIS)

    Rub, Malik Abdul; Khan, Farah; Sheikh, Mohmad Shafi; Azum, Naved; Asiri, Abdullah M.

    2016-01-01

    Highlights: • Interaction between (IBF + TX-100) mixtures has been investigated. • (IBF + TX-100) mixtures exhibit synergistic behavior. • Urea increases the surface charge of the micelles resulting halt of the micelles formation. • N agg , K sv and dielectric constant of mixed systems have also been evaluated. • 1 H NMR data suggested that IBF and TX-100 interacts through hydrophobic as well as hydrophillic interaction. - Abstract: The desirable surface/bulk properties for specific applications of drug sodium salt of ibuprofen (IBF) and Triton X-100 (TX-100) can be achieved by adjusting mainly the composition of these systems. The interactions of anionic drug IBF with non-ionic surfactant TX-100 micelles have been investigated using tensiometry, fluorometry and 1 H NMR in aqueous as well in 250 mmol⋅kg −1 urea solutions. Different theoretical models like Clint, Rubingh, and Rosen, etc. were utilized to get information about the nature of interaction between these two in bulk and at the interface. These models disclose that the non-ideal behavior with attractive interaction in bulk and at the interface exists. The steady-state fluorescence quenching study was employed to evaluate micelle aggregation numbers (N agg ), which signify the involvement of surfactant was forever higher compared to IBF. Stern–Volmer binding constants (K sv ), micropolarity (I 1 /I 3 ) and dielectric constant (D exp ) of the mixtures are also obtained using fluorescence method. By the addition of urea raise in the surface charge of the micelles was observed followed by halt of the micellization of drug and surfactant as well as their mixture, therefore cmc values increases followed by decrease in aggregation number. The 1 H NMR resonance intensity variations were paralleled by upfield shifts in the resonance frequencies, due to an increased shielding of IBF happening from closeness of the non-ionic TX-100 surfactant.

  10. Use of organoclays obtained with nonionic surfactants for drilling fluids base organic; O uso de argilas organofilicas obtidas com tensoativo nao-ionico para fluidos de perfuracao base organica

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, F.K.A. [Universidade Federal de Campina Grande (UATEC/UFCG), PB (Brazil). Unidade Academica de Tecnologia do Desenvolvimento], e-mail: kegealves@ufcg.edu.br; Neves, G.A.; Ferreira, H.C.; Silva, A.L. [Universidade Federal de Campina Grande (UFCG/UAEMa), PB (Brazil). Unidade Academica de Engenharia de Materiais; Campos, L.F.A. [Departamento de Engenharia de Materiais, DEMat/CCT/UFPB, PB (Brazil)

    2010-07-01

    This paper aims to use the compositions of organo clays obtained with nonionic surfactant for drilling fluids organic base containing additives, emulsifiers, brine, activator, reducer filtered, adensante and evaluate their rheological, filtration and electrical stability. Were studied through the mixture delineament, ten compositions of organo clays, and its performance is evaluated by means of the rheological behavior (flow curves, GI, GF, VA, VP and LE) and the tests recommended by API (PE, EE and VF). The results were compared with the standard PETROBRAS and showed that among the developed compositions, two compositions showed promising that met most of the properties and use the clay of inferior quality (Bofe and Verde-lodo) in greater quantity and minimum clay Chocolate UBM, considered the best clay in the region mines Boa Vista, PB. (author)

  11. Monitoring corrosion and corrosion control of iron in HCl by non-ionic surfactants of the TRITON-X series - Part II. Temperature effect, activation energies and thermodynamics of adsorption

    International Nuclear Information System (INIS)

    Amin, Mohammed A.; Ahmed, M.A.; Arida, H.A.; Arslan, Taner; Saracoglu, Murat; Kandemirli, Fatma

    2011-01-01

    Research highlights: → TX-305 exhibits inhibiting properties for iron corrosion more than TX-165 and TX 100. → Inhibition efficiency increases with temperature, suggesting chemical adsorption. → The three tested surfactants act as mixed-type inhibitors with cathodic predominance. → Validation of corrosion rates measured by Tafel extrapolation method is confirmed. - Abstract: The inhibition characteristics of non-ionic surfactants of the TRITON-X series, namely TRITON-X-100 (TX-100), TRITON-X-165 (TX-165) and TRITON-X-305 (TX-305), on the corrosion of iron was studied in 1.0 M HCl solutions as a function of inhibitor concentration (0.005-0.075 g L -1 ) and solution temperature (278-338 K). Measurements were conducted based on Tafel extrapolation method. Electrochemical frequency modulation (EFM), a non-destructive corrosion measurement technique that can directly give values of corrosion current without prior knowledge of Tafel constants, is also presented. Experimental corrosion rates determined by the Tafel extrapolation method were compared with corrosion rates obtained by the EFM technique and an independent method of chemical analysis. The chemical method of confirmation of the corrosion rates involved determination of the dissolved cation, using ICP-AES (inductively coupled plasma atomic emission spectrometry). The aim was to confirm validation of corrosion rates measured by the Tafel extrapolation method. Results obtained showed that, in all cases, the inhibition efficiency increased with increase in temperature, suggesting that chemical adsorption occurs. The adsorptive behaviour of the three surfactants followed Temkin-type isotherm. The standard free energies of adsorption decreased with temperature, reflecting better inhibition performance. These findings confirm chemisorption of the tested inhibitors. Thermodynamic activation functions of the dissolution process were also calculated as a function of each inhibitor concentration. All the results

  12. An investigation of bubble coalescence and post-rupture oscillation in non-ionic surfactant solutions using high-speed cinematography.

    Science.gov (United States)

    Bournival, G; Ata, S; Karakashev, S I; Jameson, G J

    2014-01-15

    Most processes involving bubbling in a liquid require small bubbles to maximise mass/energy transfer. A common method to prevent bubbles from coalescing is by the addition of surfactants. In order to get an insight into the coalescence process, capillary bubbles were observed using a high speed cinematography. Experiments were performed in solutions of 1-pentanol, 4-methyl-2-pentanol, tri(propylene glycol) methyl ether, and poly(propylene glycol) for which information such as the coalescence time and the deformation of the resultant bubble upon coalescence was extracted. It is shown in this study that the coalescence time increases with surfactant concentration until the appearance of a plateau. The increase in coalescence time with surfactant concentration could not be attributed only to surface elasticity. The oscillation of the resultant bubble was characterised by the damping of the oscillation. The results suggested that a minimum elasticity is required to achieve an increased damping and considerable diffusion has a detrimental effect on the dynamic response of the bubble, thereby reducing the damping. Copyright © 2013 Elsevier Inc. All rights reserved.

  13. Sources, transport and reactivity of anionic and non-ionic surfactants in several aquatic ecosystems in SW Spain: A comparative study

    Energy Technology Data Exchange (ETDEWEB)

    Lara-Martin, Pablo A. [Departamento de Quimica Fisica, Facultad de Ciencias del Mar y Ambientales, Universidad de Cadiz, Campus Rio San Pedro s/n, 11510 Puerto Real, Cadiz (Spain)], E-mail: pablo.lara@uca.es; Gomez-Parra, Abelardo; Gonzalez-Mazo, Eduardo [Departamento de Quimica Fisica, Facultad de Ciencias del Mar y Ambientales, Universidad de Cadiz, Campus Rio San Pedro s/n, 11510 Puerto Real, Cadiz (Spain)

    2008-11-15

    Presence, distribution and transport mechanisms of the four major synthetic surfactants -linear alkylbenzene sulfonates (LAS), alkyl ethoxysulfates (AES), nonylphenol ethoxylates (NPEOs) and alcohol ethoxylates (AEOs)- have been simultaneously studied in different aquatic ecosystems. Urban wastewater discharges and industrial activities were identified as the main sources for these compounds and their metabolites. LAS, AES and carboxylic metabolites remained in the dissolved form (87-99%). However, NPEOs and AEOs were mostly associated with particulate matter (65-86%), so their degradation in the water column was limited due to their lower bioavailability. It was also observed that sorption to the particulate phase was more intense for longer homologs/ethoxymers for all surfactants. With respect to surface sediments, AES levels were considerably below (<0.25 mg/kg) the values detected for LAS and NPEOs. Concentrations of AEOs, however, were occasionally higher (several tens of ppm) than those found for the rest of the target compounds in several sampling stations. - Occurrence and reactivity of the main synthetic surfactants in freshwater and marine systems are discussed.

  14. Viscoelasticity and microstructure of non-ionic microemulsions

    NARCIS (Netherlands)

    Eshuis, A.; Mellema, J.

    1984-01-01

    Non-ionic microemulsions were investigated by viscoelastic measurements in the kHz region. We found that in some parts of the phase diagram our systems consisted of a dispersion of spherical oil doplets, stabilized by a non-ionic surfactant, in a continuous phase of almost pure water. Because of the

  15. Nonionic emulsion-mediated synthesis of zeolite beta

    Indian Academy of Sciences (India)

    Zeolite beta synthesis was first carried out in a newly developed emulsion system containing nonionic polyoxyethylated alkylphenol surfactant, which showed interesting non-conventional features. Compared to the conventional hydrothermal synthesis of zeolite beta, the reported nonionic emulsion system showed a faster ...

  16. Nonionic emulsion-mediated synthesis of zeolite beta

    Indian Academy of Sciences (India)

    Administrator

    Abstract. Zeolite beta synthesis was first carried out in a newly developed emulsion system containing nonionic polyoxyethylated alkylphenol surfactant, which showed interesting non-conventional features. Compared to the conventional hydrothermal synthesis of zeolite beta, the reported nonionic emulsion system showed ...

  17. Physico-chemical study of new non-ionic surfactants. Influence of ions on aggregation properties; Etude physico-chimique de nouveaux tensioactifs complexants thermoreversibles. Influence d'ions reconnus et non reconnus sur les proprietes d'agregation

    Energy Technology Data Exchange (ETDEWEB)

    Coulombeau, H

    2003-01-01

    New di-block thermo-sensitive metal chelating surfactants have been synthesised. They are based on polyethoxylated non-ionic surfactants (CiEj). A lysine block is linked either to the extremity of a CiEj (surfactant 2) or in a branched position (surfactant 1). These molecules retain the cloud point and the surface-active properties exhibited by the CiEj surfactants. Moreover they possess good complexing properties towards certain ions, which allows them to be successfully applied to cloud point extraction. In both cases, the cloud point and the area per headgroup at the air-water interface are higher than those of the analogous CiEj, which shows the hydrophilic contribution of the lysine block. Macroscopic properties (phase diagrams) and microscopic properties (shape of the aggregates and interactions between them) of the water-surfactant systems have been studied at ambient temperature. Small angle X-Rays scattering (SAXS) and small angle neutrons scattering (SANS) have shown that the new di-block surfactants form spherical micelles at low concentrations. The influence of non complexed salts on the new surfactants is the same as on classical CiEj: salting-in and salting-out phenomena occur according to the Hofmeister series. The effect of a complexed ion, uranyl cation, is however unusual: it leads to a sphere to rod transition, in turn lowering significantly the cloud point, which goes against the expectations on basis of the Hofmeister series. Finally, a preliminary study of ternary mixtures, water-surfactant 1-oil, is presented. It revealed the formation of microemulsions and pointed out that the surfactant film is then a lot more rigid than that formed with classical CiEj. (author)

  18. Fungal growth on anion surfactant medium.

    Science.gov (United States)

    Hamada, Nobuo; Abe, Niichiro

    2009-12-01

    Before the present study, no fungi using anion surfactant as a nutrient had been identified, although some fungi were known to use nonion surfactant. Washing water collected from 63 washing machines was inoculated onto 0.1% LAS (Sodium dodecyl benzenesulfonate) anion surfactant media to identify fungi that can feed on anion-surfactant. Small dark colonies of fungi were found on several of the Petri-dishes from 12 days after inoculation. These were identified as Cladophialophora boppii and Exophiala spinifera using morphological features and rDNA data. A number of the isolates of C. boppii specifically were recognized as using anion surfactant as a nutrient. The growth characteristics of the two fungal species were examined on surfactant media of three kinds. Apart from anion surfactant, the fungi were also able to grow on nonion surfactant and on soap. The application of these fungi for environmental cleansing after detergent pollution is also discussed.

  19. Phosphine oxide surfactants revisited.

    Science.gov (United States)

    Stubenrauch, Cosima; Preisig, Natalie; Laughlin, Robert G

    2016-04-01

    This review summarizes everything we currently know about the nonionic surfactants alkyl dimethyl (C(n)DMPO) and alkyl diethyl (C(n)DEPO) phosphine oxide (PO surfactants). The review starts with the synthesis and the general properties (Section 2) of these compounds and continues with their interfacial properties (Section 3) such as surface tension, surface rheology, interfacial tension and adsorption at solid surfaces. We discuss studies on thin liquid films and foams stabilized by PO surfactants (Section 4) as well as studies on their self-assembly into lyotropic liquid crystals and microemulsions, respectively (Section 5). We aim at encouraging colleagues from both academia and industry to take on board PO surfactants whenever possible and feasible because of their broad variety of excellent properties. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Surfactant Membrane Phases Containing Mixtures of Hydrocarbon and Fluorocarbon Surfactants

    International Nuclear Information System (INIS)

    de Campo, Liliana; Warr, G.G.

    2005-01-01

    Full text: We describe the structure and stability of sponge and lamellar phases comprising mixtures of hydrocarbon and fluorocarbon surfactants. Such mixtures can show limited miscibility with each other, forming for example coexisting populations of hydrocarbon rich and fluorocarbon rich micelles under some circumstances. Our system is based on the well-characterised lamellar and sponge phases of cetylpyridinium chloride, hexanol and 0.2M brine, into which the partially fluorinated surfactant N-1H,1H,2H,2H-tridecafluorooctylpyridinium chloride is incorporated. By probing the structures with SAXS (small angle x-ray scattering) and SANS (small angle neutron scattering) using contrast variation, and by characterizing the dynamic properties with dynamic light scattering, we will describe the effect of incorporating the fluorinated surfactant on the phase equilibria and properties of the surfactant membrane structures. (authors)

  1. A novel thiourea-based non-ionic surfacta

    Indian Academy of Sciences (India)

    1-(4-chlorophenyl)-3-dodecanoylthiourea: A novel thiourea-based non-ionic surfactant. IMDAD ULLAHa,b,∗, AFZAL SHAHb, MUSHARAF KHANc, KHALIDA AKHTERd and. AMIN BADSHAHb. aSchool ... and environment-friendly applications. It was also ... uct was purified by thin layer chromatography. NMR spectra were ...

  2. Organofilização de argilas bentoníticas com tensoativos não- iônicos visando seu uso em fluidos de perfuração base óleo Nonionic surfactants organophilization bentonite clays aiming their use in oil base drilling fluids

    Directory of Open Access Journals (Sweden)

    I. A. Silva

    2012-09-01

    Full Text Available O uso de tensoativos não iônicos vem substituindo os tradicionais tensoativos iônicos dentre outros motivos pelo seu elevado potencial de resistência a degradação térmica. Assim, este trabalho tem por objetivo o desenvolvimento de argilas organofílicas através da incorporação de tensoativos não iônicos visando seu uso em fluidos de perfuração de poços de petróleo base óleo. Argilas bentoníticas natural, industrializadas e organofilizadas foram caracterizadas por análise química, difração de raios X e análises térmicas. Após a organofilização foi realizado o inchamento de Foster, visando a escolha dos tensoativos mais adequados aos meios líquidos orgânicos dispersantes: éster, diesel e parafina. Com as dispersões obtidas foram determinadas as propriedades reológicas através de viscosidades aparente e plástica. Os resultados evidenciaram que as argilas organofilicas apresentaram um aumento do espaçamento interlamelar e que as dispersões apresentaram propriedades reológicas dentro das especificações da Petrobrás, para uso como argilas organofílicas em fluidos de perfuração em base óleo.The nonionic surfactants use is replacing the traditional ionic surfactants among other reasons because of its high resistance to thermal degradation potential. This work aims the organoclays development through the nonionic surfactants incorporation in order to oil base drilling fluids use. The natural bentonite clay, and industrialized organophilizated were characterized by chemical analysis, X-ray diffraction and thermal analysis. After, the clay organophilization was performed by Foster swelling, seeking the most appropriate choice of surfactants to the liquid media organic dispersants, ester, paraffin and diesel. With the obtained dispersions were determined by plastic and apparent viscosities the rheological properties. The results showed that organoclays increase in the interlayer spacing and that the dispersions

  3. The Influence of Impurities in a Water Solution with Drag Reducing Surfactants on the Flow Drag-Reduction and a Recovering Method of Its Decreased Drag Reduction Effect.

    Science.gov (United States)

    Nakata, Toru; Sato, Kenji; Inaba, Hideo; Horibe, Akihiko; Haruki, Naoto

    The drag reduction of a water flow with new drag reducing surfactants (amine oxide type nonionic surfactants, mixtures of amine oxide type nonionic surfactants and betaine type amphoteric surfactants) which were selected as environmentally acceptable drag reducing additives was investigated experimentally. Addition of amine oxide type nonionic surfactants to hot or cold water can reduce flow drag in a turbulent pipe flow. The present research investigated how various ionic components dissolved in water affected this drag reducing effect. It was found that ionic impurities contained in the water affected the pipe flow drag reducing effect by amine oxide type nonionic surfactants. Moreover, it was clarified that the decrease in the pipe flow drag reducing effect was recovered by adding a mixture of amine oxide type nonionic surfactants and betaine type amphoteric surfactant to the water with ionic impurities.

  4. Fluorination reaction uranium dioxide by fluorine

    International Nuclear Information System (INIS)

    Ogata, Shinji; Homma, Shunji; Koga, Jiro; Matsumoto, Shiro; Sasahira, Akira; Kawamura, Fumio

    2004-01-01

    Kinetics of the fluorination reaction of uranium dioxide is studied using un-reacted core model with shrinking particles. The model includes the film mass transfer of fluorine gas and its diffusion in the particle. The rate constants of the model are determined by fitting the experimental data for 370-450degC. The model successfully represents the fluorination in this temperature range. The rate control step is identified by examining the rate constants of the model for 300-1,800degC. For temperature range up to 900degC, the fluorination reaction is rate controlling. For over 900degC, both mechanisms of the mass transfer of fluorine and the fluorination reaction control the rate of the fluorination. With further increase of the temperature, however, the fluorination reaction becomes so fast that the mass transfer of fluorine eventually controls the rate of the fluorination. (author)

  5. Self-consistent field modeling of linear non-ionic micelles

    NARCIS (Netherlands)

    Jodar-Reyes, A.B.; Leermakers, F.A.M.

    2006-01-01

    A self-consistent field theory is used to predict structural, mechanical, and thermodynamical properties of linear micelles of selected nonionic surfactants of the type CnEm. Upon increase in surfactant concentration the sudden micelle shape transition from spherical to cylindrical (second critical

  6. Tuning of nanoparticle-surfactant interactions in aqueous system

    Science.gov (United States)

    Kumar, Sugam; Aswal, V. K.

    2011-01-01

    The interaction of charged (anionic) silica nanoparticles with ionic and nonionic surfactants has been studied using small-angle neutron scattering (SANS). The surfactants used are anionic sodium dodecyl sulfate (SDS), cationic dodecyltrimethyl ammonium bromide (DTAB) and nonionic decaoxyethylene n-dodecylether (C12E10). The measurements are carried out at fixed concentration (1 wt%) of silica nanoparticles and with surfactant concentration varied in the range 0-2 wt%. It is found that there is no direct interaction between the nanoparticles and the surfactant (SDS) when they both are similarly charged. Both the silica nanoparticles and micelles coexist individually with no significant change in the structure of the micelles with respect to that in the pure surfactant solution. On the other hand, the presence of oppositely charged surfactant (DTAB) leads to the aggregation of silica nanoparticles even with very low surfactant concentration. The aggregation of silica nanoparticles is characterized by fractal structure and its fractal dimension remains constant with the increase in the surfactant concentration. In the case of nonionic surfactant, it interacts with the individual silica nanoparticles. The interaction is examined using two models: one that considers the surfactant layer coating on silica nanoparticles and a second one where the surface of the nanoparticles is decorated by the micelles. Contrast variation SANS measurements confirm the uniform decoration of nonionic micelles on the nanoparticles.

  7. Tuning of nanoparticle-surfactant interactions in aqueous system

    International Nuclear Information System (INIS)

    Kumar, Sugam; Aswal, V K

    2011-01-01

    The interaction of charged (anionic) silica nanoparticles with ionic and nonionic surfactants has been studied using small-angle neutron scattering (SANS). The surfactants used are anionic sodium dodecyl sulfate (SDS), cationic dodecyltrimethyl ammonium bromide (DTAB) and nonionic decaoxyethylene n-dodecylether (C 12 E 10 ). The measurements are carried out at fixed concentration (1 wt%) of silica nanoparticles and with surfactant concentration varied in the range 0-2 wt%. It is found that there is no direct interaction between the nanoparticles and the surfactant (SDS) when they both are similarly charged. Both the silica nanoparticles and micelles coexist individually with no significant change in the structure of the micelles with respect to that in the pure surfactant solution. On the other hand, the presence of oppositely charged surfactant (DTAB) leads to the aggregation of silica nanoparticles even with very low surfactant concentration. The aggregation of silica nanoparticles is characterized by fractal structure and its fractal dimension remains constant with the increase in the surfactant concentration. In the case of nonionic surfactant, it interacts with the individual silica nanoparticles. The interaction is examined using two models: one that considers the surfactant layer coating on silica nanoparticles and a second one where the surface of the nanoparticles is decorated by the micelles. Contrast variation SANS measurements confirm the uniform decoration of nonionic micelles on the nanoparticles.

  8. Fluorine disposal

    Science.gov (United States)

    Rakow, A.

    1983-01-01

    A preliminary design of an F2 dispoal system for HELSTF is presented along with recommendations on operational policy and identification of potential operational problems. The analysis is based on sizing a system to handle two different modes of the HELSTF Fluorine Flow System (one operational and one catastrophic). This information should serve both as a guide to a final detailed design for HELSTF as well as a reference for subsequent monitoring and/or modification of the system which consists of a charcoal reactor followed by a dry soda lime scrubber.

  9. Solubilization of Hydrophobic Dyes in Surfactant Solutions

    Directory of Open Access Journals (Sweden)

    Ali Reza Tehrani-Bagha

    2013-02-01

    Full Text Available In this paper, the use of surfactants for solubilization of hydrophobic organic dyes (mainly solvent and disperse dyes has been reviewed. The effect of parameters such as the chemical structures of the surfactant and the dye, addition of salt and of polyelectrolytes, pH, and temperature on dye solubilization has been discussed. Surfactant self-assemble into micelles in aqueous solution and below the concentration where this occurs—the critical micelle concentration (CMC—there is no solubilization. Above the CMC, the amount of solubilized dye increases linearly with the increase in surfactant concentration. It is demonstrated that different surfactants work best for different dyes. In general, nonionic surfactants have higher solubilization power than anionic and cationic surfactants. It is likely that the reason for the good performance of nonionic surfactants is that they allow dyes to be accommodated not only in the inner, hydrocarbon part of the micelle but also in the headgroup shell. It is demonstrated that the location of a dye in a surfactant micelle can be assessed from the absorption spectrum of the dye-containing micellar solution.

  10. Effect of Surfactants on Plasmid DNA Stability and Release from ...

    African Journals Online (AJOL)

    Purpose: To evaluate the effect of surfactants on plasmid DNA during preparation and release from polylactic glycolide (PLGA) microspheres. Methods: Various surfactants, both ionic and non-ionic (Span, Tween, Triton X100, cetyltrimethylammonium bromide and sodium dodecyl sulphate), were added during the ...

  11. Phase Behavior of Laundry Surfactants in Polar Solvents

    NARCIS (Netherlands)

    Stuart, Marc C.A.; Pas, John C. van de; Engberts, Jan B.F.N.

    2006-01-01

    Laundry surfactants are usually mixtures of ionic and nonionic detergents that exhibit a complex phase behavior. Here the ternary phase behavior of an isotropic and a liquid crystalline (LC) surfactant mixture has been examined in water/solvent systems. The size of the LC area in the ternary phase

  12. Structural study of surfactant-dependent interaction with protein

    Energy Technology Data Exchange (ETDEWEB)

    Mehan, Sumit; Aswal, Vinod K., E-mail: vkaswal@barc.gov.in [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai 400 085 (India); Kohlbrecher, Joachim [Laboratory for Neutron Scattering, Paul Scherrer Institut, CH-5232 PSI Villigen (Switzerland)

    2015-06-24

    Small-angle neutron scattering (SANS) has been used to study the complex structure of anionic BSA protein with three different (cationic DTAB, anionic SDS and non-ionic C12E10) surfactants. These systems form very different surfactant-dependent complexes. We show that the structure of protein-surfactant complex is initiated by the site-specific electrostatic interaction between the components, followed by the hydrophobic interaction at high surfactant concentrations. It is also found that hydrophobic interaction is preferred over the electrostatic interaction in deciding the resultant structure of protein-surfactant complexes.

  13. Interactions between surfactants and hydrolytic enzymes.

    Science.gov (United States)

    Holmberg, Krister

    2017-12-05

    Hydrolytic enzymes are combined with surfactants in many types of formulations, for instance detergents and personal care products. If the surfactant interacts with the enzyme there may be conformational changes that eventually lead to loss of the enzymatic activity. From a practical point of view it is important to understand the nature and magnitude of these interactions. After an introduction of the topic the review briefly discusses enzyme catalyzed reactions where surfactants are substrates for the enzyme. The rest of the review relates to associations between surfactants and hydrolytic enzymes without the surfactant being a substrate in the reaction. A discussion about general principles for such interactions is followed by a survey of the relevant literature related to four important types of hydrolytic enzymes: lipases, proteases, amylases and cellulases. It is shown in the review that the effect exerted by the surfactant differs between the different types of enzymes; it is therefore difficult to make general statements about which surfactants are most detrimental to the activity of hydrolytic enzymes. However, as a general rule nonionic surfactants can be regarded as more benign to an enzyme than anionic and cationic surfactants. This difference can be ascribed to the difference in binding mode. Whereas a nonionic surfactant only binds to the enzyme through hydrophobic interactions, an ionic surfactant can bind by a combination of electrostatic attraction and hydrophobic interaction. This latter type of binding can be strong and lead to conformational changes already at very low surfactant concentration, often far below its critical micelle concentration. Copyright © 2017 Elsevier B.V. All rights reserved.

  14. Magnetic surfactants

    OpenAIRE

    Brown, P.; Alan Hatton, T.; Eastoe, J.

    2015-01-01

    Surfactants are ubiquitous, being important commodity chemicals with wide industrial applications, and essential components of living organisms. With stimuli-responsive surfactants, self-assembly and physicochemical properties of a wide variety of materials may be readily manipulated, both reversibly and irreversibly. Until recently, magnetically responsive surfactants had not been reported. This review reports the recent progress in magnetoresponsive surfactants, covering control of interfac...

  15. Surfactants have multi-fold effects on skin barrier function.

    Science.gov (United States)

    Lemery, Emmanuelle; Briançon, Stéphanie; Chevalier, Yves; Oddos, Thierry; Gohier, Annie; Boyron, Olivier; Bolzinger, Marie-Alexandrine

    2015-01-01

    The stratum corneum (SC) is responsible for the barrier properties of the skin and the role of intercorneocyte skin lipids, particularly their structural organization, in controlling SC permeability is acknowledged. Upon contacting the skin, surfactants interact with the SC components leading to barrier damage. To improve knowledge of the effect of several classes of surfactant on skin barrier function at three different levels. The influence of treatments of human skin explants with six non-ionic and four ionic surfactant solutions on the physicochemical properties of skin was investigated. Skin surface wettability and polarity were assessed through contact angle measurements. Infrared spectroscopy allowed monitoring the SC lipid organization. The lipid extraction potency of surfactants was evaluated thanks to HPLC-ELSD assays. One anionic and one cationic surfactant increased the skin polarity by removing the sebaceous and epidermal lipids and by disturbing the organization of the lipid matrix. Another cationic surfactant displayed a detergency effect without disturbing the skin barrier. Several non-ionic surfactants disturbed the lipid matrix organization and modified the skin wettability without any extraction of the skin lipids. Finally two non-ionic surfactants did not show any effect on the investigated parameters or on the skin barrier. The polarity, the organization of the lipid matrix and the lipid composition of the skin allowed describing finely how surfactants can interact with the skin and disturb the skin barrier function.

  16. Fluorination of polymers

    International Nuclear Information System (INIS)

    Du Toit, F.J.

    1991-01-01

    Polyethylene and polypropylene were reacted with elemental fluorine under carefully controlled conditions to produce fluorocarbon polymers. Fluorination of polymer films resulted in fluorination of only the outer surfaces of the films, while the reaction of elemental fluorine with powdered hydrocarbon polymers produced perfluorocarbon polymers. Existing and newly developed techniques were used to characterize the fluorinated polymers. It was shown that the degree of fluorination was influenced by the surface area of the hydrocarbon material, the concentration, of the fluorine gas, and the time and temperature of fluorination. A fluidized-bed reactor used for the fluorination of polymer powders effectively increased the reaction rate. The surface tension and the oxygen permeability of the fluorinated polymers were studied. The surface tension of hydrocarbon polymers was not influenced by different solvents, but the surface tension of fluorinated polymers was affected by the type of solvent that was used. There were indications that the surface tension was affected by oxygen introduced into the polymer surface during fluorination. Fluorination lowered the permeability of oxygen through hydrocarbon polymers. 55 refs., 51 figs., 26 tabs

  17. Influence of Surfactants on Sodium Chloride Crystallization in Confinement.

    Science.gov (United States)

    Qazi, Mohsin J; Liefferink, Rinse W; Schlegel, Simon J; Backus, Ellen H G; Bonn, Daniel; Shahidzadeh, Noushine

    2017-05-02

    We study the influence of different surfactants on NaCl crystallization during evaporation of aqueous salt solutions. We found that at concentrations of sodium chloride close to saturation, only the cationic surfactant CTAB and the nonionic surfactant Tween 80 remain stable. For the nonionic surfactant, the high concentration of salt does not significantly change either the critical micellar concentration (CMC) or the surface tension at the CMC; for the cationic surfactant, the CMC is reduced by roughly 2 orders of magnitude upon adding the salt. The presence of both types of surfactants in the salt solution delays the crystallization of sodium chloride with evaporation. This, in turn, leads to high supersaturation which induces the rapid precipitation of a hopper crystal in the bulk. The crystallization inhibitor role of these surfactants is shown to be mainly due to the passivation of nucleation sites at both liquid/air and solid/liquid interfaces rather than a change in the evaporation rate which is found not to be affected by the presence of the surfactants. The adsorption of surfactants at the liquid/air interface prevents the crystallization at this location which is generally the place where the precipitation of sodium chloride is observed. Moreover, sum frequency generation spectroscopy measurements show that the surfactants are also present at the solid/liquid interface. The incorporation of the surfactants into the salt crystals is investigated using a novel, but simple, method based on surface tension measurements. Our results show that the nonionic surfactant Tween 80 is incorporated in the NaCl crystals but the cationic surfactant CTAB is not. Taken together, these results therefore allow us to establish the effect of the presence of surfactants on sodium chloride crystallization.

  18. Nonionizing radiation and health

    International Nuclear Information System (INIS)

    Suess, M.J.

    1985-01-01

    While a great deal of work has been done by international bodies to establish permissible levels for ionizing radiation, much less attention has been paid to the nonionizing forms of radiation and their possible health effects. Taking into account that equipment producing such radiation is now widely used both in the house and in industry, the paper presents the possible health effects of ultraviolet, visible, laser, infrared and microwave radiation, of electric and magnetic fields and of the ultrasound waves

  19. Non-ionizing radiation

    International Nuclear Information System (INIS)

    Fischer, P.G.

    1983-01-01

    The still growing use of non-ionizing radiation such as ultraviolet radiation laser light, ultrasound and infrasound, has induced growing interest in the effects of these types of radiation on the human organism, and in probable hazards emanating from their application. As there are up to now no generally approved regulations or standards governing the use of non-ionizing radiation and the prevention of damage, it is up to the manufacturers of the relevant equipment to provide for safety in the use of their apparatus. This situation has led to a feeling of incertainty among manufacturers, as to how which kind of damage should be avoided. Practice has shown that there is a demand for guidelines stating limiting values, for measuring techniques clearly indicating safety thresholds, and for safety rules providing for safe handling. The task group 'Non-ionizing radiation' of the Radiation Protection Association started a programme to fulfill this task. Experts interested in this work have been invited to exchange their knowledge and experience in this field, and a collection of loose leaves will soon be published giving information and recommendations. (orig./HP) [de

  20. Nephelometric determination of fluorine

    Science.gov (United States)

    Stevens, R.E.

    1936-01-01

    Fluorine in minerals may be determined with the nephelometer to about 1 per cent of the fluorine. The determination is made on an aliquot of the sodium chloride solution of the fluorine, obtained by the Berzelius method of extraction. The fluorine is precipitated as colloidal calcium fluoride in alcoholic solution, gelatin serving as a protective colloid. Arsenates, sulfates, and phosphates, which interfere with the determination, must be removed.

  1. Compendium of fluorine data

    International Nuclear Information System (INIS)

    Detamore, J.A.

    1983-01-01

    Research was conducted to locate information about fluorine. This information includes chemical and physical properties of fluorine, physiological effects produced by the material, first-aid, personnel and facility protection, and materials of construction required when handling fluorine in piping and process vessels. The results of this research have been compiled in this report

  2. Tunable, antibacterial activity of silicone polyether surfactants.

    Science.gov (United States)

    Khan, Madiha F; Zepeda-Velazquez, Laura; Brook, Michael A

    2015-08-01

    Silicone surfactants are used in a variety of applications, however, limited data is available on the relationship between surfactant structure and biological activity. A series of seven nonionic, silicone polyether surfactants with known structures was tested for in vitro antibacterial activity against Escherichia coli BL21. The compounds varied in their hydrophobic head, comprised of branched silicone structures with 3-10 siloxane linkages and, in two cases, phenyl substitution, and hydrophilic tail of 8-44 poly(ethylene glycol) units. The surfactants were tested at three concentrations: below, at, and above their Critical Micelle Concentrations (CMC) against 5 concentrations of E. coli BL21 in a three-step assay comprised of a 14-24h turbidometric screen, a live-dead stain and viable colony counts. The bacterial concentration had little effect on antibacterial activity. For most of the surfactants, antibacterial activity was higher at concentrations above the CMC. Surfactants with smaller silicone head groups had as much as 4 times the bioactivity of surfactants with larger groups, with the smallest hydrophobe exhibiting potency equivalent to sodium dodecyl sulfate (SDS). Smaller PEG chains were similarly associated with higher potency. These data link lower micelle stability and enhanced permeability of smaller silicone head groups to antibacterial activity. The results demonstrate that simple manipulation of nonionic silicone polyether structure leads to significant changes in antibacterial activity. Copyright © 2015 Elsevier B.V. All rights reserved.

  3. Preliminary Testing For Anionic, Cationic and Non-ionic

    Directory of Open Access Journals (Sweden)

    Bokic, Lj.

    2007-11-01

    Full Text Available Detergents present a major environmental problem due to large quantities of surfactants released from laundries. For this reason, it is important to apply an appropriate analytical method for their determination. In this work, we propose two simple, fast and inexpensive analytical methods for anionic, cationic and non-ionic surfactant determination: thin layer chromatography (TLC separation for qualitative screening and quantitative potentiometric determination with ion-selective electrodes. These methods have been chosen because of their many advantages: rapidity, ease of operation, low cost of analysis and a wide variety of TLC application possibilities. The advantage of potentiometric titration is its very high degree of automation and very low detection limits obtained with different ion-selective electrodes applied for different surfactants.

  4. Polymer vs. surfactant : competitive adsorption at the solid-liquid interface

    NARCIS (Netherlands)

    Postmus, B.R.

    2008-01-01

    The research described in this thesis focuses on the competitive adsorption of nonionic polymer and nonionic surfactant on a silica surface. These type of systems are interesting from both an academical and a technological viewpoint. Our academic interest stems simply from the observation that we

  5. Self-consistent field modeling of adsorption from polymer/surfactant mixtures

    NARCIS (Netherlands)

    Postmus, B.R.; Leermakers, F.A.M.; Cohen Stuart, M.A.

    2008-01-01

    We report on the development of a self-consistent field model that describes the competitive adsorption of nonionic alkyl-(ethylene oxide) surfactants and nonionic polymer poly(ethylene oxide) (PEO) from aqueous solutions onto silica. The model explicitly describes the response to the pH and the

  6. On the rheology of mixed systems of hydrophobically modified polyacrylate microgels and surfactants: Role of the surfactant architecture.

    Science.gov (United States)

    Alves, Luís; Lindman, Björn; Klotz, Björn; Böttcher, Axel; Haake, Hans-Martin; Antunes, Filipe E

    2018-03-01

    The rheological control of suspensions is of key interest in the formulation design. A chemically cross-linked hydrophobically modified poly(acrylic acid) (HMCL-PAA), used as rheology modifier, is pH sensitive and shows swelling behavior above a critical pH due to the ionization of the acrylic acid groups. At low pH, HMCL-PAA suspensions are liquid and turbid. The binding of surfactants to HMCL-PAA, at low pH conditions, can result in significant changes on rheology and transparency of the polymeric suspensions, due to the swelling of the microgel particles. The influence of surfactants addition on the rheological properties and transparency of HMCL-PAA suspensions was determined. A systematic study was performed using different types of surfactants (ionic, non-ionic and zwitterionic). The gelation efficiency of HMCL-PAA suspensions at low pH is strongly dependent on surfactant architecture: ionic surfactants are found to be much more efficient than non-ionic or zwitterionic surfactants. Ionic surfactants lead to a liquid-to-gel transition accompanied by an increase of transparency of the suspensions. Among the ionic surfactants, anionics show stronger interactions with the polymer. Also the surfactant hydrophobicity is relevant; the more hydrophobic the surfactant, the stronger is the binding to the polymer and thus the larger the particle swelling. Copyright © 2017 Elsevier Inc. All rights reserved.

  7. Fluorine separation and generation device

    Science.gov (United States)

    The Regents of the University of California

    2008-12-23

    A process and apparatus for the electrolytic separation of fluorine from a mixture of gases is disclosed. Also described is the process and apparatus for the generation of fluorine from fluorine/fluoride containing solids, liquids or gases.

  8. Critical micelle concentration values for different surfactants measured with solid-phase microextraction fibers

    NARCIS (Netherlands)

    Haftka, Joris J H; Scherpenisse, Peter; Oetter, G??nter; Hodges, Geoff; Eadsforth, Charles V.; Kotthoff, Matthias; Hermens, Joop L M

    The amphiphilic nature of surfactants drives the formation of micelles at the critical micelle concentration (CMC). Solid-phase microextraction (SPME) fibres were used in the present study to measure CMC values of twelve nonionic, anionic, cationic and zwitterionic surfactants. The SPME derived CMC

  9. Fluorine in medicinal chemistry.

    Science.gov (United States)

    Swallow, Steven

    2015-01-01

    Since its first use in the steroid field in the late 1950s, the use of fluorine in medicinal chemistry has become commonplace, with the small electronegative fluorine atom being a key part of the medicinal chemist's repertoire of substitutions used to modulate all aspects of molecular properties including potency, physical chemistry and pharmacokinetics. This review will highlight the special nature of fluorine, drawing from a survey of marketed fluorinated pharmaceuticals and the medicinal chemistry literature, to illustrate key concepts exploited by medicinal chemists in their attempts to optimize drug molecules. Some of the potential pitfalls in the use of fluorine will also be highlighted. © 2015 Elsevier B.V. All rights reserved.

  10. Bacterial degradation of fluorinated compounds

    NARCIS (Netherlands)

    Ferreira, Maria Isabel Martins

    2007-01-01

    Fluorine was produced for the first time by Henri Moissan in 1886, for which he received the Nobel Prize in chemistry in 1906. The unique properties of fluorine have led to the development of fluorine chemistry and numerous synthetic fluorinated compounds have been prepared and tested for different

  11. Screening of mixed surfactant systems: Phase behavior studies and CT imaging of surfactant-enhanced oil recovery experiments

    Energy Technology Data Exchange (ETDEWEB)

    Llave, F.M.; Gall, B.L.; Lorenz, P.B.; Cook, I.M.; Scott, L.J.

    1993-11-01

    A systematic chemical screening study was conducted on selected anionic-nonionic and nonionic-nonionic systems. The objective of the study was to evaluate and determine combinations of these surfactants that would exhibit favorable phase behavior and solubilization capacity. The effects of different parameters including (a) salinity, (b) temperature, (c) alkane carbon number, (c) hydrophilic/lipophilic balance (HLB) of nonionic component, and (d) type of surfactant on the behavior of the overall chemical system were evaluated. The current work was conducted using a series of ethoxylated nonionic surfactants in combinations of several anionic systems with various hydrocarbons. Efforts to correlate the behavior of these mixed systems led to the development of several models for the chemical systems tested. The models were used to compare the different systems and provided some guidelines for formulating them to account for variations in salinity, oil hydrocarbon number, and temperature. The models were also evaluated to determine conformance with the results from experimental measurements. The models provided good agreement with experimental results. X-ray computed tomography (CT) was used to study fluid distributions during chemical enhanced oil recovery experiments. CT-monitored corefloods were conducted to examine the effect of changing surfactant slug size injection on oil bank formation and propagation. Reducing surfactant slug size resulted in lower total oil production. Oil recovery results, however, did not correlate with slug size for the low-concentration, alkaline, mixed surfactant system used in these tests. The CT measurements showed that polymer mobility control and core features also affected the overall oil recovery results.

  12. Influence of metacide - surfactant complexes on agricultural crops

    Directory of Open Access Journals (Sweden)

    Orynkul Esimova

    2014-12-01

    Full Text Available The complexes based on surfactants and polyhexamethyleneguanidine hydrochloride (metacide are important for agriculture. This paper considers compositions of known bactericidal metacide with different surfactants: anionic surfactant sodium dodecylsulphate (DDSNa and nonionic surfactant Tween 80 (monooleate of oxyethylenated anhydrosorbitols. The effect of individual components and associates of metacide and surfactants on productivity and infection of cereals was studied. According to the study, the highest productivity and infection rate were shown by the associate of metacide and Tween-80. At concentration of Tween-80 in aqueous solution equal to 0.001% in combination with metacide, efficiency was 98% at 0% infection. The surface tension and the wetting of metacide, DDSNa, Tween-80, and associates of metacide with surfactants were studied. In comparison with individual components, metacide-DDSNa and metacide-Tween-80 associates have higher surface activity.

  13. NMR study of the dynamics of cationic gemini surfactant 14-2-14 in mixed solutions with conventional surfactants.

    Science.gov (United States)

    Jiang, Yan; Lu, Xing-Yu; Chen, Hong; Mao, Shi-Zhen; Liu, Mai-Li; Luo, Ping-Ya; Du, You-Ru

    2009-06-18

    Three kinds of conventional surfactants, namely, two nonionic surfactants [polyethylene glycol (23) lauryl ether (Brij-35) and Triton X-100 (TX-100)], one cationic surfactant [n-tetradecyltrimethyl ammonium bromide (TTAB)], and an anionic surfactant [sodium n-dodecyl sulfate (SDS)}, were mixed into the quaternary ammonium gemini surfactant [C(14)H(29)N(+)(CH(3))(2)](2)(CH(2))(2).2Br(-) (14-2-14) in aqueous solution. The exchange rate constants between 14-2-14 molecules in the mixed micelles and those in the bulk solution were detected using two nuclear magnetic resonance (NMR) methods: one-dimensional (1D) line shape analysis and two-dimensional (2D) exchange spectroscopy (EXSY). The results obtained from these two methods were consistent. Both showed that mixing a nonionic conventional surfactant, either Brij-35 or TX-100, enhanced the exchange process between the 14-2-14 molecules in the mixed micelles and those in the bulk solution. In contrast, the anionic surfactant SDS and the cationic surfactant TTAB slowed the process slightly.

  14. Determination of non ionic surfactants (BIAS) in aqueous samples

    International Nuclear Information System (INIS)

    Capri, S.; Patrolecco, L.; Zanette, M.; Marcomini, A.

    1996-01-01

    A series of experiments were carried out to solve the inconsistencies of the regulatory semispecific method for the determination of nonionic surfactants (BIAS) in aqueous samples and to evaluate precision, accuracy and applicability concentration range. Significant improvements of the protocol IRSA E-013 were introduced and the BIAS method was recently published, in revised form, in the IRSA Handbook of Water Analysis (Method 5160)

  15. Small-angle neutron scattering studies of nonionic surfactant: Effect ...

    Indian Academy of Sciences (India)

    It is found that the micellar structure significantly depends on the temperature and concentration of sugars. The micelles are found to be prolate ellipsoids at 30°C and the axial ratio of the micelle increases with the increase in temperature. The presence of lower concentration of sugar reduces the size of micelles and it ...

  16. The influence of nonionic surfactant Brij 30 on biodegradation of ...

    African Journals Online (AJOL)

    AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL · News. OTHER RESOURCES... for Researchers · for Journals · for Authors · for Policy Makers · about Open Access · Journal Quality.

  17. Small-angle neutron scattering studies of nonionic surfactant: Effect ...

    Indian Academy of Sciences (India)

    (C5H10O5), d-glucose (C6H12O6) and sucrose (C12H22O11) (Merck, AR) were dried in vacuum before use. Solvent D2O (99.4 atom D %, supplied by Heavy Water. Division, BARC, Mumbai) was used for SANS experiments. The use of D2O instead of water for preparing solution provides a very good contrast between the ...

  18. NIGMS Fluorine Detection

    Science.gov (United States)

    Chen, Philip T.; Benna, Mehdi

    2015-01-01

    Please note that these charts were not presented at the CCMPP July 2015 Workshop; however, we would like to include these charts in the Workshop Proceedings.These charts present an overview of the NGIMS fluorine evaluation conducted for the MAVEN mission. The charts show that fluorine may be generated by the following mechanisms:-Reaction with water-Elevated temperature-Radiation, atomic oxygen, ultraviolet, spacecraft charging, and vacuum-Space environmental synergy

  19. Pulmonary surfactant proteins and polymer combinations reduce surfactant inhibition by serum

    Science.gov (United States)

    Lu, Karen W.; Pérez-Gil, Jesús; Echaide, Mercedes; Taeusch, H. William

    2011-01-01

    Acute respiratory distress syndrome (ARDS) is an inflammatory condition that can be associated with capillary leak of serum into alveoli causing inactivation of surfactant. Resistance to inactivation is affected by types and concentrations of surfactant proteins, lipids, and polymers. Our aim was to investigate the effects of different combinations of these three components. A simple lipid mixture (DPPC/POPG) or a more complex lipid mixture (DPPC/POPC/POPG/cholesterol) was used. Native surfactant proteins SP-B and SP-C obtained from pig lung lavage were added either singly or combined at two concentrations. Also, non-ionic polymers polyethylene glycol and dextran and the anionic polymer hyaluronan were added either singly or in pairs with hyaluronan included. Non-ionic polymers work by different mechanisms than anionic polymers, thus the purpose of placing them together in the same surfactant mixture was to evaluate if the combination would show enhanced beneficial effects. The resulting surfactant mixtures were studied in the presence or absence of serum. A modified bubble surfactometer was used to evaluate surface activities. Mixtures that included both SP-B and SP-C plus hyaluronan and either dextran or polyethylene glycol were found to be the most resistant to inhibition by serum. These mixtures, as well as some with either SP-B or SP-C with combined polymers were as or more resistant to inactivation than native surfactant. These results suggest that improved formulations of lung surfactants are possible and may be useful in reducing some types of surfactant inactivation in treating lung injuries. PMID:21741354

  20. Rheology of cellulose nanofibrils in the presence of surfactants.

    Science.gov (United States)

    Quennouz, Nawal; Hashmi, Sara M; Choi, Hong Sung; Kim, Jin Woong; Osuji, Chinedum O

    2016-01-07

    Cellulose nanofibrils (CNFs) present unique opportunities for rheology modification in complex fluids. Here we systematically consider the effect of ionic and non-ionic surfactants on the rheology of dilute CNF suspensions. Neat suspensions are transparent yield-stress fluids which display strong shear thinning and power-law dependence of modulus on concentration, G' ∼ c(2.1). Surfactant addition below a critical mass concentration cc produces an increase in the gel modulus with retention of optical clarity. Larger than critical concentrations induce significant fibril aggregation leading to the loss of suspension stability and optical clarity, and to aggregate sedimentation. The critical concentration was the lowest for a cationic surfactant (DTAB), cc ≈ 0.08%, while suspension stability was retained for non-ionic surfactants (Pluronic F68, TX100) at concentrations up to 8%. The anionic surfactant SDS led to a loss of stability at cc ≈ 1.6% whereas suspension stability was not compromised by anionic SLES up to 8%. Dynamic light scattering data are consistent with a scenario in which gel formation is driven by micelle-nanofibril bridging mediated by associative interactions of ethoxylated surfactant headgroups with the cellulose fibrils. This may explain the strong difference between the properties of SDS and SLES-modified suspensions. These results have implications for the use of CNFs as a rheology modifier in surfactant-containing systems.

  1. Effects of anthropogenic surfactants on the conversion of marine dissolved organic carbon and microgels.

    Science.gov (United States)

    Shiu, Ruei-Feng; Lee, Chon-Lin

    2017-04-15

    The possible impact of three types of anthropogenic surfactants on the ability of marine dissolved organic carbon (DOC) to form self-assembled microgels was evaluated. The behavior of existing native microgels was also examined in the presence of surfactants. These results reveal that the release of surfactants even at low concentrations into the aquatic environment could effectively hinder the self-assembly of DOC polymers. The extent of the size reduction had the following order: anionic, cationic, and non-ionic. Furthermore, charged surfactants can disrupt existing native microgels, converting large assemblies into smaller particles. One possible mechanisms is that surfactants are able to enhance the stability of DOC polymers and disrupt aggregates due to their surface charges and protein-denaturing activities. These findings suggest that the ecological system is altered by anthropogenic surfactants, and provide useful information for ecological assessments of different types of surfactants and raise warnings about surfactant applications. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. SOME PHYSICOCHEMICAL PROPERTIES OF OCTYLPHENOL ETHOXYLATE NONIONICS (TRITON X-100, TRITON X-114 AND TRITON X-405 AND THE TEMPERATURE EFFECT ON THIS PROPERTIES

    Directory of Open Access Journals (Sweden)

    Taliha Sidim

    2016-11-01

    Full Text Available Surface tensions and condutvities of aqueous solutions of nonionic surfactants at various concentrations were measured at diffferent temperatures.The critical micelle concentration (CMC of aqueous solutions of three different octylphenol ethoxylate nonionics(Triton X-114, Triton X-100 and Triton X-405 are determined at different temperatures.The effect of the ethylene oxide chain length and temperature on the CMC is also determined.

  3. Preparation of stable tea seed oil nano-particle emulsions by a low energy method with non-ionic surfactants; Preparación de emulsiones estables de nanopartículas de aceite de semilla de té mediante un método de baja energía con tensioactivos no iónicos

    Energy Technology Data Exchange (ETDEWEB)

    Kanlayavattanakul, M.; Lourith, N.

    2017-07-01

    Tea seed oil nano-particle emulsions were prepared. Non-ionic surfactants containing Tween 80 and Span 80 (1:1, w/w) were mixed with propanol (3-9:1, w/w) to give Smix, which was thereafter mixed with tea seed oil. The mixture was titrated with water at 150 rpm to give clear or bluish and bluish-white emulsions. Twelve nano-particle emulsions with 64.64 to 72.73% Smix, 16.66 to 27.27% oil and 9.09 to 16.67% water with particle sizes between 207.00 to 430.10 nm, PDI of 0 to 0.4, ζ-potential of -42.00 to -49.63 mV, pH of 7.04 to 7.32 and 151.33 to 241.93 cps, were stable following an accelerated stability test and long term storage at room temperature and 4 and 45 ºC for 90 days, although one system (16.66% oil and 66.67% Smix) was separated. This nano-particle emulsion formulation is concise and feasible for an industrial development of topical products containing tea seed oil. [Spanish] Se prepararon emulsiones de nanopartículas de aceite de semilla de té. Se mezclaron tensioactivos no iónicos que contenían Tween 80 y Span 80 (1:1, p/p) con propanol (3-9: 1, p/p) para dar Smix que después se mezcló con aceite de semilla de té. La mezcla se valoró con agua a 150 rpm para dar emulsiones claras o azuladas y blanco azulado. Doce emulsiones de nanopartículas con 64,64 a 72,73% de Smix, 16,66 a 27,27% de aceite y 9,09 a 16,67% de agua con tamaños de partícula entre 207,00 y 430,10 nm, PDI de 0 a 0,4, potencial ζ de -42,00 a -49,63 mV, PH de 7,04 a 7,32 y 151,33 a 241,93 cps, se mantuvieron estables tras el ensayo de estabilidad acelerada y almacenamiento a largo plazo a temperatura ambiente y 4 y 45 ºC durante 90 días, aunque uno de los sistemas (16,66% de aceite y 66,67% de Smix) se desvió. Esta formulación de emulsión de nanopartículas es concisa y factible para un desarrollo industrial de productos tópicos que contienen aceite de semilla de té.

  4. Towards detergency in liquid CO2–A surfactant formulation for particle release in an apolar medium

    NARCIS (Netherlands)

    Banerjee, S.; Sutanto, S.; Kleijn, J.M.; Cohen Stuart, M.A.

    2012-01-01

    In this paper we propose, characterize and test a surfactant formulation, consisting of a branched polyoxyethylene type commercial non-ionic surfactant (Igepal CA520), n-hexane and water, for use in CO2 dry-cleaning to enhance the removal of particulate soil. In the formulation lamellar mesophases

  5. Fluorination methods in drug discovery

    OpenAIRE

    Yerien, Damián Emilio; Bonesi, Sergio Mauricio; Postigo, Jose Alberto

    2017-01-01

    Fluorination reactions of medicinal and biologically-active compounds will be discussed. Late stage fluorination strategies of medicinal targets have recently attracted considerable attention on account of the influence that the fluorine atom can impart to targets of medicinal importance, such as a modulation of lipophilicity, electronegativity, basicity and bioavailability, this latter as a consequence of membrane permeability. Therefore, the recourse to late-stage fluorine substitution on c...

  6. Fluorine lubricated bearing technology

    Science.gov (United States)

    Mallaire, F. R.

    1973-01-01

    An experimental program was conducted to evaluate and select materials for ball bearings intended for use in liquid fluorine and/or FLOX. The ability of three different ball-separator materials, each containing nickel, to form and transfer a nickel fluoride film to provide effective lubrication at the required areas of a ball bearing operating in liquid fluorine was evaluated. In addition, solid lubrication of a ball bearing operating in liquid fluorine by either a fused fluoride coating applied to all surfaces of the ball separator or by a fluoride impregnation of porous sintered material ball separators was evaluated. Less bearing wear occurred when tests were conducted in the less reactive FLOX. Bearings fabricated from any of the materials tested would have relatively short wear lives and would require frequent replacement in a reusable engine.

  7. DRY FLUORINE SEPARATION METHOD

    Science.gov (United States)

    Seaborg, G.T.; Gofman, J.W.; Stoughton, R.W.

    1959-05-19

    Preparation and separation of U/sup 233/ by irradiation of ThF/sub 4/ is described. During the neutron irradiation to produce Pa/sup 233/ a fluorinating agent such as HF, F/sub 2/, or HF + F/sub 2/ is passed through the ThF/sub 4/ powder to produce PaF/sub 5/. The PaF/sub 5/, being more volatile, is removed as a gas and allowed to decay radioactively to U/sup 233/ fluoride. A batch procedure in which ThO/sub 2/ or Th metal is irradiated and fluorinated is suggested. Some Pa and U fluoride volatilizes away. Then the remainder is fluorinated with F/sub 2/ to produce very volatile UF/sub 6/ which is recovered. (T.R.H.)

  8. Metalloid Aluminum Clusters with Fluorine

    Science.gov (United States)

    2016-12-01

    FLUORINE by Nape D. Lentsoane December 2016 Thesis Advisor: Joseph Hooper Second Reader: James Luscombe THIS PAGE INTENTIONALLY LEFT BLANK i......contains significant amounts of fluorine . The fluorine can, in principle, oxidize the metallic elements, resulting in a system much like organic

  9. Fluorine content of Fukien teas

    Energy Technology Data Exchange (ETDEWEB)

    Wang, T.H.; Lin, C.S.; Wu, C.; Liao, C.E.; Lin, H.Y.

    1949-01-01

    A study was made on the fluorine contents of Fukien teas and analytical results indicated the amount ranged from 5.7 to 35.5 mg. per 100 grams of dry tea. The high content of fluorine was found not to be due to contamination nor to the high fluorine content of the soil in which the tea plant was cultivated. Differences in the methods of manufacture had no effect on the fluorine content of the final products. Different varieties of tea plants have different powers to absorb fluorine from the soil. Of the two varieties of tea plants studied, Shui-Sen leaves possessed the lower fluorine content. Age of the tea leaves exerted an important influence on the fluorine content, the older leaves containing considerably more fluorine than the younger. The amount of fluorine that may be extracted in a two per cent infusion varies from 29.1 per cent for fresh leaves to 50.5 per cent for black tea. The process of roasting and rolling rendered the fluorine more soluble, hence the amount extracted increased in green tea. Fermentation further increased the extractability of the fluorine; thus the amount extracted was the highest in black tea, which was fermented, less in the semi-fermented oolong tea, and least in the unfermented green tea. The extractability of fluorine was also increased with age of the leaves.

  10. Use of surfactants for the remediation of contaminated soils: a review.

    Science.gov (United States)

    Mao, Xuhui; Jiang, Rui; Xiao, Wei; Yu, Jiaguo

    2015-03-21

    Due to the great harm caused by soil contamination, there is an increasing interest to apply surfactants to the remediation of a variety of contaminated soils worldwide. This review article summarizes the findings of recent literatures regarding remediation of contaminated soils/sites using surfactants as an enhancing agent. For the surfactant-based remedial technologies, the adsorption behaviors of surfactants onto soil, the solubilizing capability of surfactants, and the toxicity and biocompatibility of surfactants are important considerations. Surfactants can enhance desorption of pollutants from soil, and promote bioremediation of organics by increasing bioavailability of pollutants. The removal of heavy metals and radionuclides from soils involves the mechanisms of dissolution, surfactant-associated complexation, and ionic exchange. In addition to the conventional ionic and nonionic surfactants, gemini surfactants and biosurfactants are also applied to soil remediation due to their benign features like lower critical micelle concentration (CMC) values and better biocompatibility. Mixed surfactant systems and combined use of surfactants with other additives are often adopted to improve the overall performance of soil washing solution for decontamination. Worldwide the field studies and full-scale remediation using surfactant-based technologies are yet limited, however, the already known cases reveal the good prospect of applying surfactant-based technologies to soil remediation. Copyright © 2014 Elsevier B.V. All rights reserved.

  11. Surfactant media for constant-current coulometry. Application for the determination of antioxidants in pharmaceuticals

    Energy Technology Data Exchange (ETDEWEB)

    Ziyatdinova, Guzel, E-mail: Ziyatdinovag@mail.ru [Analytical Chemistry Department, A.M. Butlerov Institute of Chemistry, Kazan (Volga Region) Federal University, Kremlyevskaya, 18, Kazan 420008 (Russian Federation); Ziganshina, Endzhe; Budnikov, Herman [Analytical Chemistry Department, A.M. Butlerov Institute of Chemistry, Kazan (Volga Region) Federal University, Kremlyevskaya, 18, Kazan 420008 (Russian Federation)

    2012-09-26

    Highlights: Black-Right-Pointing-Pointer Applicability of surfactants in constant-current coulometry is shown for the first time. Black-Right-Pointing-Pointer Reactions of antioxidants with electrogenerated titrants in surfactant media are investigated. Black-Right-Pointing-Pointer Water insoluble antioxidants can be determined in water media with addition of surfactants. Black-Right-Pointing-Pointer Coulometric determination of antioxidants in pharmaceutical dosage forms using surfactants media is developed. - Abstract: Effect of surfactant presence on electrochemical generation of titrants has been evaluated and discussed for the first time. Cationic (1-dodecylpyridinium and cetylpyridinium bromide), anionic (sodium dodecyl sulfate) and nonionic (Triton X100 and Brij{sup Registered-Sign} 35) surfactants as well as nonionic high molecular weight polymer (PEG 4000) do not react with the electrogenerated bromine, iodine and hexacyanoferrate(III) ions. The electrogenerated chlorine chemically interact with Triton X100 and Brij{sup Registered-Sign} 35. The allowable range of surfactants concentrations providing 100% current yield has been found. Chain-breaking low molecular weight antioxidants (ascorbic acid, rutin, {alpha}-tocopherol and retinol) were determined by reaction with the electrogenerated titrants in surfactant media. Nonionic and cationic surfactants can be used for the determination of antioxidants by reaction with the electrogenerated halogens. On contrary, cationic surfactants gives significantly overstated results of antioxidants determination with electrogenerated hexacyanoferrate(III) ions. The use of surfactants in coulometry of {alpha}-tocopherol and retinol provides their solubilization and allows to perform titration in water media. Simple, express and reliable coulometric approach for determination of {alpha}-tocopherol, rutin and ascorbic acid in pharmaceuticals using surfactant media has been developed. The relative standard deviation of the

  12. Determination of the critical micelle concentration in simulations of surfactant systems.

    Science.gov (United States)

    Santos, Andrew P; Panagiotopoulos, Athanassios Z

    2016-01-28

    Alternative methods for determining the critical micelle concentration (cmc) are investigated using canonical and grand canonical Monte Carlo simulations of a lattice surfactant model. A common measure of the cmc is the "free" (unassociated) surfactant concentration in the presence of micellar aggregates. Many prior simulations of micellizing systems have observed a decrease in the free surfactant concentration with overall surfactant loading for both ionic and nonionic surfactants, contrary to theoretical expectations from mass-action models of aggregation. In the present study, we investigate a simple lattice nonionic surfactant model in implicit solvent, for which highly reproducible simulations are possible in both the canonical (NVT) and grand canonical (μVT) ensembles. We confirm the previously observed decrease of free surfactant concentration at higher overall loadings and propose an algorithm for the precise calculation of the excluded volume and effective concentration of unassociated surfactant molecules in the accessible volume of the solution. We find that the cmc can be obtained by correcting the free surfactant concentration for volume exclusion effects resulting from the presence of micellar aggregates. We also develop an improved method for determination of the cmc based on the maximum in curvature for the osmotic pressure curve determined from μVT simulations. Excellent agreement in cmc and other micellar properties between NVT and μVT simulations of different system sizes is observed. The methodological developments in this work are broadly applicable to simulations of aggregating systems using any type of surfactant model (atomistic/coarse grained) or solvent description (explicit/implicit).

  13. Osmolality of nonionic contrast media.

    Science.gov (United States)

    Miklautz, H; Fichte, K; Wegscheider, K

    1989-01-01

    Solutions of different low osmolar contrast media (CM) obviously show clinically relevant differences in the osmolality despite equal iodine concentrations and similar molecular structure. To obtain precise and comparable data, the osmolality of five batches (usually) each of contrast media, iopamidol, iohexol, iopromide, and ioxaglate-all preparations commercially available-were measured by means of the vapor pressure method. The osmolality of the solutions of sodium meglumine ioxaglate with the same iodine concentration is lower than that of the nonionic CM examined. Iopromide showed the lowest osmolality and iohexol the highest value of the nonionic preparations. The differences are statistically significant as a rule. They are attributed to a varying association and hydration of the CM molecules in the solution.

  14. Extraction of monoclonal antibodies (IgG1) using anionic and anionic/nonionic reverse micelles.

    Science.gov (United States)

    George, Daliya A; Stuckey, David C

    2010-01-01

    Purification schemes for antibody production based on affinity chromatography are trying to keep pace with increases in cell culture expression levels and many current research initiatives are focused on finding alternatives to chromatography for the purification of Monoclonal antibodies (MAbs). In this article, we have investigated an alternative separation technique based on liquid-liquid extraction called the reverse micellar extraction. We extracted MAb (IgG1) using reverse micelles of an anionic surfactant, sodium bis 2-ethyl-hexyl sulfosuccinate (AOT) and a combination of anionic (AOT) and nonionic surfactants (Brij-30, Tween-85, Span-85) using isooctane as the solvent system. The extraction efficiency of IgG1 was studied by varying parameters, such as pH of the aqueous phase, cation concentration, and type and surfactant concentration. Using the AOT/Isooctane reverse micellar system, we could achieve good overall extraction of IgG1 (between 80 and 90%), but only 30% of the bioactivity of IgG1 could be recovered at the end of the extraction by using its binding to affinity chromatography columns as a surrogate measure of activity. As anionic surfactants were suspected as being one of the reasons for the reduced activity, we decided to combine a nonionic surfactant with an anionic surfactant and then study its effect on the extraction efficiency and bioactivity. The best results were obtained using an AOT/Brij-30/Isooctane reverse micellar system, which gave an overall extraction above 90 and 59% overall activity recovery. An AOT/Tween-85/Isooctane reverse micellar system gave an overall extraction of between 75 and 80% and overall activity recovery of around 40-45%. The results showed that the activity recovery of IgG1 can be significantly enhanced using different surfactant combination systems, and if the recovery of IgG1 can be further enhanced, the technique shows considerable promise for the downstream purification of MAbs. © 2010 American Institute of

  15. Medidas de tensão superficial pelo método de contagem de gotas: descrição do método e experimentos com tensoativos não-iônicos etoxilados Surface tension measurement by drop counting method: method description and experiments with etoxilated non-ionic surfactants

    Directory of Open Access Journals (Sweden)

    Érico Teixeira Neto

    2009-01-01

    Full Text Available Surface tension knowledge of surfactants aqueous solutions is important during amphiphilic molecule manufacturing and new product development, as feedback information to handle synthesis parameters to target performance. Drop counting method is an interesting simplification of drop weight method for surface tension measurements. A simple laboratory measurement device, with capability for temperature control, was assembled to allow investigation of ethoxylated surfactants. The implementation of the method was preceded by a detailed investigation of two factors that may affect the measured surface tension: drop formation velocity and surfactant ethoxylation degree. The limitations of the method are discussed on this basis.

  16. Nanoparticle-enabled delivery of surfactants in porous media.

    Science.gov (United States)

    Nourafkan, Ehsan; Hu, Zhongliang; Wen, Dongsheng

    2018-06-01

    The adsorption of surfactants on the reservoir rocks surface is a serious issue in many energy and environment related areas. Learning from the concept of drug delivery in the nano-medicine field, this work proposes and validates the concept of using nanoparticles to deliver a mixture of surfactants into a porous medium. TiO 2 nanoparticles (NPs) are used as carriers for a blend of surfactants mixtures including anionic alkyl aryl sulfonic acid (AAS) and nonionic alcohol ethoxylated (EA) at the optimum salinity and composition conditions. The transport of NPs through a core sample of crushed sandstone grains and the adsorption of surfactants are evaluated. By using TiO 2 NPs, the adsorption of surfactant molecules can be significantly reduced, i.e. half of the initial adsorption value. The level of surfactant adsorption reduction is related to the NPs transport capability through the porous medium. An application study shows that comparing to surfactant flooding alone, the total oil recovery can be increased by 7.81% of original oil in place (OOIP) by using nanoparticle bonded surfactants. Such work shows the promise of NP as an effective surfactant carrier for sandstone reservoirs, which could have many potential applications in enhanced oil recovery (EOR) and environmental remediation. Copyright © 2018 Elsevier Inc. All rights reserved.

  17. Fluorine Based Superhydrophobic Coatings

    Directory of Open Access Journals (Sweden)

    Jean-Denis Brassard

    2012-05-01

    Full Text Available Superhydrophobic coatings, inspired by nature, are an emerging technology. These water repellent coatings can be used as solutions for corrosion, biofouling and even water and air drag reduction applications. In this work, synthesis of monodispersive silica nanoparticles of ~120 nm diameter has been realized via Stöber process and further functionalized using fluoroalkylsilane (FAS-17 molecules to incorporate the fluorinated groups with the silica nanoparticles in an ethanolic solution. The synthesized fluorinated silica nanoparticles have been spin coated on flat aluminum alloy, silicon and glass substrates. Functionalization of silica nanoparticles with fluorinated groups has been confirmed by Fourier Transform Infrared spectroscopy (FTIR by showing the presence of C-F and Si-O-Si bonds. The water contact angles and surface roughness increase with the number of spin-coated thin films layers. The critical size of ~119 nm renders aluminum surface superhydrophobic with three layers of coating using as-prepared nanoparticle suspended solution. On the other hand, seven layers are required for a 50 vol.% diluted solution to achieve superhydrophobicity. In both the cases, water contact angles were more than 150°, contact angle hysteresis was less than 2° having a critical roughness value of ~0.700 µm. The fluorinated silica nanoparticle coated surfaces are also transparent and can be used as paint additives to obtain transparent coatings.

  18. Impact of surfactant type for ionic liquid pretreatment on enhancing delignification of rice straw.

    Science.gov (United States)

    Chang, Ken-Lin; Chen, Xi-Mei; Wang, Xiao-Qin; Han, Ye-Ju; Potprommanee, Laddawan; Liu, Jing-Yong; Liao, Yu-Ling; Ning, Xun-An; Sun, Shui-Yu; Huang, Qing

    2017-03-01

    This work describes an environmentally friendly method for pretreating rice straw by using 1-Allyl-3-methylimidazolium chloride ([AMIM]Cl) as an ionic liquid (IL) assisted by surfactants. The impacts of surfactant type (including nonionic-, anionic-, cationic- and bio-surfactant) on the ionic liquid pretreatment were investigated. The bio-surfactant+IL-pretreated rice straw showed significant lignin removal (26.14%) and exhibited higher cellulose conversion (36.21%) than the untreated (16.16%) rice straw. The cellulose conversion of the rice straw pretreated with bio-surfactant+IL was the highest and the lowest was observed for pretreated with cationic-surfactant+IL. Untreated and pretreated rice straw was thoroughly characterized through SEM and AFM. In conclusion, the results provided an effective and environmental method for pretreating lignocellulosic substrates by using green solvent (ionic liquid) and biodegradable bio-surfactant. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. An experimental investigation of the effects of surfactants on the severity of vapor explosions

    International Nuclear Information System (INIS)

    Kowal, M.G.; Dowling, M.F.; Abdel-Khalik, S.I.

    1993-01-01

    Dilute aqueous solutions of two surface active agents (surfactants) were tested for their ability to suppress spontaneous steam explosions in molten tin/water systems. At 800C, 12 g of tin were dropped into aqueous solutions of a nonionic surfactant (nonylphenol polyethylene glycol ether) and an ionic surfactant (dodecylbenzene sulfonate sodium salt) with concentrations of 5, 10, and 50 wppm. The data indicate that surfactants reduce the severity of steam explosions. On average, the surfactant solutions resulted in a 65% reduction in average peak pressures when compared with the deionized water results. However, very little difference in the mitigating effect of the surfactant solutions was observed as the concentration was increased beyond 5 wppm. Particle-size distribution results also indicated a mitigating effect on steam explosion severity, as a 19% reduction in participating melt mass fraction was observed when the surfactants were used

  20. Direct Observation Of Nanoparticle-Surfactant Interactions Using Small Angle Neutron Scattering

    Science.gov (United States)

    Kumar, Sugam; Aswal, V. K.

    2010-12-01

    Interactions of anionic silica nanoparticles with anionic, cationic and nonionic surfactants have directly been studied by contrast variation small angle neutron scattering (SANS). The measurements are performed on 1 wt% of both silica nanoparticles and surfactants of anionic sodium dodecyle sulphate (SDS), cationic dodecyltrimethyl ammonium bromide (DTAB) and non-ionic polyoxyethylene 10 lauryl ether (C12E10) in aqueous solution. We show that there is no direct interaction in the case of SDS with silica particles, whereas strong interaction for DTAB leads to the aggregation of silica particles. The interaction of C12E10 is found through the micelles adsorbed on the silica particles.

  1. Surfactant loss control in chemical flooding spectroscopic and calorimetric study of adsorption and precipitation on reservoir minerals. Annual report, September 30, 1993--September 30, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Somasundaran, P.

    1995-06-01

    The aim of this project is to elucidate the mechanisms underlying adsorption and surface precipitation of flooding surfactants on reservoir minerals. Effect of surfactant structure, surfactant combinations, other inorganic and polymeric species is being studied. A multi-pronged approach consisting of micro and nano spectroscopy, microcalorimetry, electrokinetics, surface tension and wettability is used to achieve the goals. The results of this study should help in controlling surfactant loss in chemical flooding and also in developing optimum structures and conditions for efficient chemical flooding processes. During the second year of this three year contract, adsorption/desorption of single surfactants and select surfactant mixtures on alumina and silica was studied. Surfactants studied include the anionic sodium dodecyl sulfate (SDS), cationic tetradecyl trimethyl ammonium chloride (TTAC), nonionic pentadecylethoxylated nonyl phenol (NP-15) and the nonionic octaethylene glycol n-dodecyl ether (C{sub 12}EO{sub 8}) of varying hydrocarbon chain length. The microstructure of the adsorbed layer in terms of micropolarity and aggregation numbers was probed using fluorescence spectroscopy. Changes of microstructure upon dilution (desorption) were also studied. Presence of the nonionic surfactant in the mixed aggregate led to shielding of the charge of the ionic surfactant which in-turn promoted aggregation but reduced electrostatic attraction between the charged surfactant and the mineral surface. Strong consequences of surfactant interactions in solution upon adsorption as well as correlations between monomer concentrations in mixtures and adsorption were revealed.

  2. Surface shear inviscidity of soluble surfactants.

    Science.gov (United States)

    Zell, Zachary A; Nowbahar, Arash; Mansard, Vincent; Leal, L Gary; Deshmukh, Suraj S; Mecca, Jodi M; Tucker, Christopher J; Squires, Todd M

    2014-03-11

    Foam and emulsion stability has long been believed to correlate with the surface shear viscosity of the surfactant used to stabilize them. Many subtleties arise in interpreting surface shear viscosity measurements, however, and correlations do not necessarily indicate causation. Using a sensitive technique designed to excite purely surface shear deformations, we make the most sensitive and precise measurements to date of the surface shear viscosity of a variety of soluble surfactants, focusing on SDS in particular. Our measurements reveal the surface shear viscosity of SDS to be below the sensitivity limit of our technique, giving an upper bound of order 0.01 μN·s/m. This conflicts directly with almost all previous studies, which reported values up to 10(3)-10(4) times higher. Multiple control and complementary measurements confirm this result, including direct visualization of monolayer deformation, for SDS and a wide variety of soluble polymeric, ionic, and nonionic surfactants of high- and low-foaming character. No soluble, small-molecule surfactant was found to have a measurable surface shear viscosity, which seriously undermines most support for any correlation between foam stability and surface shear rheology of soluble surfactants.

  3. Surfactant use with nitrate-based bioremediation

    International Nuclear Information System (INIS)

    Wilson, B.H.; Hutchins, S.R.; West, C.C.

    1995-01-01

    This study presents results of an initial survey on the effect of six surfactants on the biodegradation of petroleum hydrocarbons in bioremediation applications using nitrate as the electron acceptor. Aquifer material from Park City, Kansas, was used for the study. The three atomic surfactants chosen were Steol CS-330, Dowfax 8390 and sodium dodecylbenzene sulfonate (SDBS); the three nonionic surfactants were T-MAZ-60, Triton X-100, and Igepal CO-660. Both Steol CS-330 and T-MAZ-60 biodegraded under denitrifying conditions. The Steol inhibited biodegradation of benzene, toluene, ethylbenzene, xylenes, and trimethylbenzenes (BTEXTMB). Only toluene was rapidly degraded in the presence of T-MAZ-60. Biodegradation of all compounds, including toluene, appears to be inhibited by Dowfax 8390 and SDBS. No biodegradation of Dowfax 8390 or SDBS was observed. SDBS inhibited denitrification, but Dowfax 8390 did not. For the microcosms containing Triton X-100 or Igepal CO-660, removal of toluene, ethylbenzene, m-xylene, 1,3,5-TMB, and 1,2,4-TMB were similar to their removals in the no-surfactant treatment. These two surfactants did not biodegrade, did not inhibit biodegradation of the alkylbenzenes, and did not inhibit denitrification. Further studies are continuing with aquifer material from Eglin Air Force Base

  4. Foaming behaviour of polymer-surfactant solutions

    International Nuclear Information System (INIS)

    Cervantes-MartInez, Alfredo; Maldonado, Amir

    2007-01-01

    We study the effect of a non-ionic amphiphilic polymer (PEG-100 stearate also called Myrj 59) on the foaming behaviour of aqueous solutions of an anionic surfactant (sodium dodecyl sulfate or SDS). The SDS concentration was kept fixed while the Myrj 59 concentration was varied. Measurements of foamability, surface tension and electrical conductivity were carried out. The results show two opposite effects depending on the polymer concentration: foamability is higher when the Myrj 59 concentration is low; however, it decreases considerably when the polymer concentration is increased. This behaviour is due to the polymer adsorption at the air/liquid interface at lower polymer concentrations, and to the formation of a polymer-surfactant complex in the bulk at higher concentrations. The results are confirmed by surface tension and electrical conductivity measurements, which are interpreted in terms of the microstructure of the polymer-surfactant solutions. The observed behaviour is due to the amphiphilic nature of the studied polymer. The increased hydrophobicity of Myrj 59, compared to that of water-soluble polymers like PEG or PEO, increases its 'reactivity' towards SDS, i.e. the strength of its interaction with this anionic surfactant. Our results show that hydrophobically modified polymers have potential applications as additives in order to control the foaming properties of surfactant solutions

  5. Use of surfactants for the remediation of contaminated soils: A review

    Energy Technology Data Exchange (ETDEWEB)

    Mao, Xuhui, E-mail: clab@whu.edu.cn [School of Resource and Environmental Science, Wuhan University, Wuhan 430072 (China); Jiang, Rui; Xiao, Wei [School of Resource and Environmental Science, Wuhan University, Wuhan 430072 (China); Yu, Jiaguo, E-mail: jiaguoyu@yahoo.com [State Key Laboratory of Advanced Technology for Material Synthesis and Processing, Wuhan University of Technology, Wuhan 430070 (China)

    2015-03-21

    Highlights: • The recent advances in use of surfactant for soil remediation are reviewed. • The mechanisms of surfactant-based soil remediation are discussed. • A review on the application of different types of surfactants is made. • The future research direction of surfactant-based technologies is suggested. - Abstract: Due to the great harm caused by soil contamination, there is an increasing interest to apply surfactants to the remediation of a variety of contaminated soils worldwide. This review article summarizes the findings of recent literatures regarding remediation of contaminated soils/sites using surfactants as an enhancing agent. For the surfactant-based remedial technologies, the adsorption behaviors of surfactants onto soil, the solubilizing capability of surfactants, and the toxicity and biocompatibility of surfactants are important considerations. Surfactants can enhance desorption of pollutants from soil, and promote bioremediation of organics by increasing bioavailability of pollutants. The removal of heavy metals and radionuclides from soils involves the mechanisms of dissolution, surfactant-associated complexation, and ionic exchange. In addition to the conventional ionic and nonionic surfactants, gemini surfactants and biosurfactants are also applied to soil remediation due to their benign features like lower critical micelle concentration (CMC) values and better biocompatibility. Mixed surfactant systems and combined use of surfactants with other additives are often adopted to improve the overall performance of soil washing solution for decontamination. Worldwide the field studies and full-scale remediation using surfactant-based technologies are yet limited, however, the already known cases reveal the good prospect of applying surfactant-based technologies to soil remediation.

  6. Use of surfactants for the remediation of contaminated soils: A review

    International Nuclear Information System (INIS)

    Mao, Xuhui; Jiang, Rui; Xiao, Wei; Yu, Jiaguo

    2015-01-01

    Highlights: • The recent advances in use of surfactant for soil remediation are reviewed. • The mechanisms of surfactant-based soil remediation are discussed. • A review on the application of different types of surfactants is made. • The future research direction of surfactant-based technologies is suggested. - Abstract: Due to the great harm caused by soil contamination, there is an increasing interest to apply surfactants to the remediation of a variety of contaminated soils worldwide. This review article summarizes the findings of recent literatures regarding remediation of contaminated soils/sites using surfactants as an enhancing agent. For the surfactant-based remedial technologies, the adsorption behaviors of surfactants onto soil, the solubilizing capability of surfactants, and the toxicity and biocompatibility of surfactants are important considerations. Surfactants can enhance desorption of pollutants from soil, and promote bioremediation of organics by increasing bioavailability of pollutants. The removal of heavy metals and radionuclides from soils involves the mechanisms of dissolution, surfactant-associated complexation, and ionic exchange. In addition to the conventional ionic and nonionic surfactants, gemini surfactants and biosurfactants are also applied to soil remediation due to their benign features like lower critical micelle concentration (CMC) values and better biocompatibility. Mixed surfactant systems and combined use of surfactants with other additives are often adopted to improve the overall performance of soil washing solution for decontamination. Worldwide the field studies and full-scale remediation using surfactant-based technologies are yet limited, however, the already known cases reveal the good prospect of applying surfactant-based technologies to soil remediation

  7. Fluorine-18 labelled compounds

    International Nuclear Information System (INIS)

    Kleijn, J.P. de

    1978-01-01

    The work presented in this thesis deals with the problems involved in the adaption of reactor-produced fluorine-18 to the synthesis of 18 F-labelled organic fluorine compounds. Several 18 F-labelling reagents were prepared and successfully applied. The limitations to the synthetic possibilities of reactor-produced fluoride- 18 become manifest in the last part of the thesis. An application to the synthesis of labelled aliphatic fluoro amino acids has appeared to be unsuccessful as yet, although some other synthetic approaches can be indicated. Seven journal articles (for which see the availability note) are used to compose the four chapters and three appendices. The connecting text gives a survey of known 18 F-compounds and methods for preparing such compounds. (Auth.)

  8. Size separation of analytes using monomeric surfactants

    Science.gov (United States)

    Yeung, Edward S.; Wei, Wei

    2005-04-12

    A sieving medium for use in the separation of analytes in a sample containing at least one such analyte comprises a monomeric non-ionic surfactant of the of the general formula, B-A, wherein A is a hydrophilic moiety and B is a hydrophobic moiety, present in a solvent at a concentration forming a self-assembled micelle configuration under selected conditions and having an aggregation number providing an equivalent weight capable of effecting the size separation of the sample solution so as to resolve a target analyte(s) in a solution containing the same, the size separation taking place in a chromatography or electrophoresis separation system.

  9. Novel Fluorine Oxidizers

    Science.gov (United States)

    1994-02-01

    These findings demonstrate that in agreement with our results from ab initio calculations and contrary to the VSEPR concept of repelling points on a...plane deformation force constants being much larger than the out-of-plane ones. It is shown that the VSEPR model of repelling points on a sphere cannot...fluorine bridges; (vii) that the pentagonal bipyramidal structures of these fluorides and oxofluorides cannot be explained by the VSEPR rules ot repelling

  10. Structure and phase behavior of polymer loaded non-ionic and anionic microemulsions

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Andreas, E-mail: andreas.weber@fkp.physik.tu-darmstadt.de; Stühn, Bernd [Institute for Condensed Matter Physics, Technische Universität Darmstadt, Darmstadt (Germany)

    2016-04-14

    We investigate the structure and phase behavior of C{sub 12}E{sub 4} based reverse water in octane microemulsions with small angle x-ray scattering and small angle neutron scattering experiments to explore the phase diagram of the droplet structure. In the regime of stable droplets, these droplets are loaded with the hydrophilic polymer polyethyleneoxide (M{sub W} = 1500 g/mol) and compared with microemulsions based on the anionic surfactant AOT. In the small angle neutron scattering experiments, we use shell contrast to focus on the surfactant shell and its variation with addition of polymer. We observe, as predicted by indirect measurements such as dielectric spectroscopy, that the polymer interacts differently with a nonionic or an anionic surfactant shell: In the former case the addition of polymer does not seem to affect the surfactant shell. In the latter case, the obtained scattering data show that the anionic surfactant layer is strongly influenced leading to a higher polydispersity which may be attributed to a floppier surfactant shell.

  11. Study of adjuvant effect of model surfactants from the groups of alkyl sulfates, alkylbenzene sulfonates, alcohol ethoxylates and soaps

    DEFF Research Database (Denmark)

    Clausen, S K; Sobhani, S; Poulsen, O M

    2000-01-01

    The sodium salts of representatives of anionic surfactants, dodecylbenzene sulfonate (SDBS), dodecyl sulfate (SDS) and coconut oil fatty acids, and a nonionic surfactant, dodecyl alcohol ethoxylate, were studied for adjuvant effect on the production of specific IgE antibodies in mice. The surfact......The sodium salts of representatives of anionic surfactants, dodecylbenzene sulfonate (SDBS), dodecyl sulfate (SDS) and coconut oil fatty acids, and a nonionic surfactant, dodecyl alcohol ethoxylate, were studied for adjuvant effect on the production of specific IgE antibodies in mice...... showed a statistically significant increase in OVA specific IgE levels. After two boosters, a statistically significant suppression in OVA-specific IgE production occurred with SDS (1000 mg/l), SDBS (1000 and 100 mg/l), coconut soap (1000 mg/l) and the alcohol ethoxylate (10 mg/l). This study suggests...

  12. 29 CFR 1926.54 - Nonionizing radiation.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false Nonionizing radiation. 1926.54 Section 1926.54 Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR... § 1926.54 Nonionizing radiation. (a) Only qualified and trained employees shall be assigned to install...

  13. Detergent extraction of herpes simplex virus type 1 glycoprotein D by zwitterionic and non-ionic detergents and purification by ion-exchange high-performance liquid chromatography

    NARCIS (Netherlands)

    Welling-Wester, S; Feijlbrief, M; Koedijk, DGAM; Welling, GW

    1998-01-01

    Detergents (surfactants) are the key reagents in the extraction and purification of integral membrane proteins. Zwitterionic and non-ionic detergents were used for the extraction of recombinant glycoprotein D (gD-1) of herpes simplex virus type 1 (HSV-1) from insect cells infected with recombinant

  14. Interaction of diazepam with surfactants. Spectrophotometric and spectrofluorometric study

    Science.gov (United States)

    De La Guardia, M.; Rodilla, F.

    1986-03-01

    The interaction of diazepam with non-ionic, anionic and cationic surfactants has been studied spectrophotometrically and fluorometrically. It has been verified that the absorption spectrum of diazepam is not modified in micellar medium. However, a dramatic five-fold increase in fluorescence sensitivity is observed in the presence of sodium lauryl sulphate (SDS). The experimental conditions, temperature, pH and surfactant concentration have been optimized to improve the fluorometric determination of diazepam and a detection limit of 0,04 ppmhas been obtained.

  15. Identification of phases of various oil, surfactant/ co-surfactants and water system by ternary phase diagram.

    Science.gov (United States)

    Syed, Haroon K; Peh, Kok K

    2014-01-01

    The objective of this study was to select appropriate surfactants or blends of surfactants and oil to study the ternary phase diagram behavior and identify various phases obtained from the oil and surfactant/surfactant mixture combinations of different HLB. The phases include conventional emulsion, gel/viscous and transparent/translucent microemulsion. Pseudoternary phase diagrams of water, oil and S/Smix of various HLB values range of 9.65-15 were constructed by using water titration method at room temperature. Visual analysis, conductivity and dye dilution test (methylene blue) were performed after each addition and mixing of water, to identify phases as microemulsion, o/w or w/o emulsion (turbid/milky) and transparent gel/turbid viscous. High gel or viscous area was obtained with Tween 80 and surfactant mixture of Tween 80 and Span 80 with all oils. The results indicated that non-ionic surfactants and PG of different HLB values exhibited different pseudoternary phase diagram characteristics but no microemulsions originated from mineral and olive oils. The w/o emulsion occupied a large area in the ternary phase triangle when HLB value of the surfactant/Smix decreased. The o/w emulsion area was large with increasing HLB value of surfactant/Smix.

  16. Micellar solubilization of poorly water-soluble drugs: effect of surfactant and solubilizate molecular structure.

    Science.gov (United States)

    Vinarov, Zahari; Katev, V; Radeva, D; Tcholakova, S; Denkov, N D

    2018-04-01

    This study aims to clarify the role of surfactant and drug molecular structures on drug solubility in micellar surfactant solutions. (1) Rationale for surfactant selection is provided; (2) the large data set can be used for validation of the drug solubility parameters used in oral absorption models. Equilibrium solubility of two hydrophobic drugs and one model hydrophobic steroid in micellar solutions of 19 surfactants was measured by HPLC. The drug solubilization locus in the micelles was assessed by UV spectrometry. Danazol is solubilized much more efficiently than fenofibrate by ionic surfactants due to ion-dipole interactions between the charged surfactant head groups and the polar steroid backbone. Drug solubilization increases linearly with the increase of hydrophobic chain length for all studied surfactant types. Addition of 1-3 ethylene oxide (EO) units in the head group of dodecyl sulfate surfactants reduces significantly the solubilization of both studied drugs and decreases linearly the solubilization locus polarity of fenofibrate. The locus of fenofibrate solubilization is in the hydrophobic core of nonionic surfactant micelles and in the palisade layer of ionic surfactant micelles. Highest drug solubility can be obtained by using surfactants molecules with long chain length coupled with hydrophilic head group that provides additional drug-surfactant interactions (i.e. ion-dipole) in the micelles.

  17. Effect of Surfactants on Mechanical, Thermal, and Photostability of a Monoclonal Antibody.

    Science.gov (United States)

    Agarkhed, Meera; O'Dell, Courtney; Hsieh, Ming-Ching; Zhang, Jingming; Goldstein, Joel; Srivastava, Arvind

    2018-01-01

    The purpose of this work was to evaluate the effect of commonly used surfactants (at 0.01% w/v concentration) on mechanical, thermal, and photostability of a monoclonal antibody (MAb1) of IgG1 sub-class and to evaluate the minimum concentration of surfactant (Polysorbate 80) required in protecting MAb1 from mechanical stress. Surfactants evaluated were non-ionic surfactants, Polysorbate 80, Polysorbate 20, Pluronic F-68 (polyoxyethylene-polyoxypropylene block polymer), Brij 35 (polyoxyethylene lauryl ether), Triton X-100, and an anionic surfactant, Caprylic acid (1-Heptanecarboxylic acid). After evaluating effect of surfactants and determining stabilizing effect of Polysorbate 80 against mechanical stress without compromising thermal and photostability of MAb1, the minimum concentration of Polysorbate 80 required for mechanical stability was further examined. Polysorbate 80 concentration was varied from 0 to 0.02%. Mechanical stability was evaluated by agitation of MAb1 at 300 rotations per minute at room temperature for 72 h. Samples were analyzed for purity by SEC-HPLC, turbidity by absorbance at 350 nm, visible particles by visual inspection, and sub-visible particles by light obscuration technique on a particle analyzer. All non-ionic surfactants tested showed a similar effect in protecting against mechanical stress and did not exhibit any significant negative effect on thermal and photostability. However, Caprylic acid had a slightly negative effect on mechanical and photostability when compared to the non-ionic surfactants or sample without surfactant. This work demonstrated that polysorbate 80 is better than other surfactants tested and that a concentration of at least 0.005% (w/v) Polysorbate 80 is needed to protect MAb1 against mechanical stress.

  18. The study of The study of the influence of temperature on surfactants – polyethylene glycol layers The study of the influence of temperature on surfactants – polyethylene glycol layers on liquid-gas interface liquid-gas interfacethe influence of temperature on surfactants – polyethylene glycol layers on liquid-gas interfaceThe study of the influence of temperature on surfactants – polyethylene glycol layers on liquid-gas interface

    Directory of Open Access Journals (Sweden)

    Seryk Boloshaan

    2015-03-01

    Full Text Available The surface tension of compositions consisting of nonionic polyethylene glycol and surface active substances of different nature and influence of temperatures on properties of their adsorption layers were studied. To be taken into account the basics of classical chemical thermodynamics and colloidal chemistry, the thermodynamic parameters were determined for the adsorption of glycol, cetyl pyridinium bromide, Tween- 80 and sodium dodecyl sulfate. Adsorption speed was valuated By Kinetic curves of a liquid /gas interfaces. As a surfactants were taken the anionic surfactant – sodium dodecylsulphate, cationic surfactant cetylpyridinium bromide and nonionic Tween-80. The reason of using nonionic polyethyleneglycol as polymer is that the polymer is not toxic, biodegradable and it has no harm to the human body. That is why they are largely used in food industry, pharmaceutics, cosmetics and household chemical products.

  19. Effect of three representative surfactants on methane hydrate formation rate and induction time

    Directory of Open Access Journals (Sweden)

    Mostafa keshavarz Moraveji

    2017-06-01

    Full Text Available The effects of three types of surfactants on methane hydrate formation process were investigated. Three different classes of surfactants involving anionic (sodium dodecyl sulfonate, cationic (hexadecyl trimethyl ammonium bromide and non-ionic (poly oxy ethylene (40 octyl phenyl ether have been used. Thermodynamics of hydrate formation, formation rate, kinetic constants and induction time in the presence of surfactants with various concentrations were analyzed. Critical micelle concentrations (CMCs of these surfactants in water were determined by induction time measurements in various concentrations under methane hydrate formation conditions. The critical micelle concentration (CMC at the methane hydrate formation conditions for SDS, HTABr and TritonX-405 solutions were obtained at 450, 380 and 950 ppm, respectively. The experimental results indicated that hydrate formation rate increased with the use of surfactants for all concentrations and induction time decreased. It was found that for surfactants, CMC at hydrate formation conditions was less than CMC at ambient conditions.

  20. Application of nanofiltration membranes for removal of surfactants from water solutions

    Directory of Open Access Journals (Sweden)

    Kowalska Izabela

    2017-01-01

    Full Text Available The objective of the study was to compare effectiveness of nanofiltration (NF process for treatment aqueous solutions containing various types of surfactants (anionic, cationic and non-ionic. The experiments were conducted with the use of Microdyn-Nadir® nanofiltration membranes (NP010 and NP030. The effect of surfactant type, its concentration and membrane cut-off on the process parameters (retention coefficient and permeate flux was assessed. The experiments showed that separation of anionic and cationic surfactants depended on their concentration in the feed solutions. The retention coefficient of anionic surfactant ranged from 54 to 81% (NP010 and from 64 to 80% (NP030, while rejection of cationic surfactant varied from 48 to 85% (NP010 and from 51 to 88% (NP030. The values of retention coefficient of non-ionic surfactant were in the range of 69-77% and 79-88% for NP010 and NP030, respectively; and to a much lesser extent were depended on its concentration in the feed solutions in comparison with anionic and cationic compounds. Membrane characterized by smaller value of cut-off (NP030 allowed to obtain higher retention coefficients of surfactants. The membrane permeability deterioration was observed with the increase of surfactants concentration in the treated solutions. In all experiments, a sharp decline of the permeate flux was noticed for concentration below the CMC values.

  1. Removal of 226Ra and 228Ra from TENORM sludge waste using surfactants solutions.

    Science.gov (United States)

    Attallah, M F; Hamed, Mostafa M; El Afifi, E M; Aly, H F

    2015-01-01

    The feasibility of using surfactants as extracting agent for the removal of radium species from TENORM sludge produced from petroleum industry is evaluated. In this investigation cationic and nonionic surfactants were used as extracting agents for the removal of radium radionuclides from the sludge waste. Two surfactants namely cetyltrimethylammonium bromide (CTAB) and Triton X-100 (TX100) were investigated as the extracting agents. Different parameters affecting the removal of both (226)Ra and (228)Ra by the two surfactants as well as their admixture were studied by the batch technique. These parameters include effect of shaking time, surfactants concentration and temperature as well as the effect of surfactants admixture. It was found that, higher solution temperature improves the removal efficiency of radium species. Combined extraction of nonionic and cationic surfactants produces synergistic effect in removal both (226)Ra and (228)Ra, where the removals reached 84% and 80% for (226)Ra and (228)Ra, respectively, were obtained using surfactants admixture. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Process for preparing fluorine-18

    Science.gov (United States)

    Winchell, Harry S.; Wells, Dale K.; Lamb, James F.; Beaudry, Samuel B.

    1976-09-21

    An improved process for preparation of fluorine-18 by a neon (deuteron, alpha particle) fluorine-18 nuclear reaction in a non-reactive enclosed reaction zone wherein a ultrapure product is recovered by heating the reaction zone to a high temperature and removing the product with an inert gas.

  3. Rapid general microdetermination of fluorine

    NARCIS (Netherlands)

    Leuven, H.C.E. van; Rotscheid, G.J.; Buis, W.J.

    1979-01-01

    A rapid micromethod for the determination of fluorine in a wide variety of materials has been developed. The method is based on the liberation of the fluorine (as HF) from the sample by means of pyrohydrolysis with steam at 1120?? C, The amount of fluoride in the condensate is subsequently measured

  4. Modifications of surfactant distributions and surface morphologies in latex films due to moisture exposure

    Science.gov (United States)

    Guizhen H. Xu; Jinping Dong; Steven J. Severtson; Carl J. Houtman; Larry E. Gwin

    2009-01-01

    Migration of surfactants in water-based, pressure-sensitive adhesive (PSA) films exposed to static and cyclic relative humidity conditions was investigated using confocal Raman microscopy (CRM) and atomic force microscopy (AFM). Studied PSA films contain monomers n-butyl acrylate, vinyl acetate, and methacrylic acid and an equal mass mixture of anionic and nonionic...

  5. Fouling behavior of silica nanoparticle-surfactant mixtures during constant flux dead-end ultrafiltration

    NARCIS (Netherlands)

    Trzaskus, Krzystof; Lee, Sooi Li; de Vos, Wiebe Matthijs; Kemperman, Antonius J.B.; Nijmeijer, Kitty

    2017-01-01

    The increasing use of engineered nanoparticles in customer products results in their accumulation in water sources. In this experimental study, we investigated the role of surfactant type (cationic, anionic and non-ionic) and concentration on fouling development, nanoparticle rejection and fouling

  6. Cellobiohydrolase and endoglucanase respond differently to surfactants during the hydrolysis of cellulose

    DEFF Research Database (Denmark)

    Hsieh, Chia-wen C.; Cannella, David; Jørgensen, Henning

    2015-01-01

    Background: Non-ionic surfactants such as polyethylene glycol (PEG) can increase the glucose yield obtained from enzymatic saccharification of lignocellulosic substrates. Various explanations behind this effect include the ability of PEG to increase the stability of the cellulases, decrease non-p...

  7. Cellobiohydrolase and endoglucanase respond differently to surfactants during the hydrolysis of cellulose

    DEFF Research Database (Denmark)

    Hsieh, Chia-wen C.; Cannella, David; Jørgensen, Henning

    2015-01-01

    Background: Non-ionic surfactants such as polyethylene glycol (PEG) can increase the glucose yield obtained from enzymatic saccharification of lignocellulosic substrates. Various explanations behind this effect include the ability of PEG to increase the stability of the cellulases, decrease non...

  8. Adsorption of surfactants on sand surface in enhanced oil recovery: Isotherms, kinetics and thermodynamic studies

    Energy Technology Data Exchange (ETDEWEB)

    Bera, Achinta; Kumar, T.; Ojha, Keka; Mandal, Ajay, E-mail: mandal_ajay@hotmail.com

    2013-11-01

    Adsorption of surfactants onto reservoir rock surface may result in the loss and reduction of their concentrations in surfactant flooding, which may render them less efficient or ineffective in practical applications of enhanced oil recovery (EOR) techniques. Surfactant flooding for EOR received attraction due to its ability to increase the displacement efficiency by lowering the interfacial tension between oil and water and mobilizing the residual oil. This article highlights the adsorption of surfactants onto sand surface with variation of different influencing factors. It has been experimentally found that adsorption of cationic surfactant on sand surface is more and less for anionic surfactant, while non-ionic surfactant shows intermediate behaviour. X-ray diffraction (XRD) study of clean sand particles has been made to determine the main component present in the sand particles. The interaction between sand particles and surfactant has been studied by Fourier Transform Infrared (FTIR) Spectroscopy of the sand particles before and after aging with surfactant. Salinity plays an important role in adsorption of anionic surfactant. Batch experiments were also performed to understand the effects of pH and adsorbent dose on the sorption efficiency. The sand particles exhibited high adsorption efficiency at low pH for anionic and nonionic surfactants. But opposite trend was found for cationic surfactant. Adsorption data were analyzed by fitting with Langmuir, Freundlich, Redlich-Peterson, and Sips isotherm models. Results show that the Langmuir isotherm and pseudo-second order kinetics models suit the equilibrium and kinetics of adsorption on sand surface. Thermodynamics feasibility of the adsorption process was also studied to verify the spontaneity of the process.

  9. Effects of various surfactants on the dispersion stability and electrical conductivity of surface modified graphene

    Energy Technology Data Exchange (ETDEWEB)

    Uddin, Md. Elias [WCU Program, Department of BIN Fusion Technology, Chonbuk National University, Jeonju, Jeonbuk 561-756 (Korea, Republic of); Kuila, Tapas [Surface Engineering and Tribology, CSIR – Central Mechanical Engineering Research Institute, Durgapur 721 302 (India); Nayak, Ganesh Chandra [Department of Applied Chemistry, ISM Dhanbad, Dhanbad 826 004, Jharkhand (India); Kim, Nam Hoon [Department of Hydrogen and Fuel Cell Engineering, Chonbuk National University, Jeonju, Jeonbuk 561-756 (Korea, Republic of); Ku, Bon-Cheol [Institute of Advanced Composite Materials, Korea Institute of Science and Technology, Dunsan-ri, Bongdong-eup, Wanju-gun, Jeollabuk-do 864-9 (Korea, Republic of); Lee, Joong Hee, E-mail: jhl@chonbuk.ac.kr [WCU Program, Department of BIN Fusion Technology, Chonbuk National University, Jeonju, Jeonbuk 561-756 (Korea, Republic of); Department of Hydrogen and Fuel Cell Engineering, Chonbuk National University, Jeonju, Jeonbuk 561-756 (Korea, Republic of)

    2013-06-15

    Highlights: ► Water dispersible graphene has been prepared using ionic and non-ionic surfactants. ► XPS and FTIR spectra analysis confirm surface modification and reduction of GO. ► The highest water dispersibility is observed in the graphene modified with of SDBS. ► The best properties of modified graphene is achieved with GO/surfactant ratio of two. -- Abstract: Ionic and non-ionic surfactant functionalized, water dispersible graphene were prepared to investigate the effects on the dispersion stability and electrical conductivity of graphene. In this study, sodium dodecyl benzene sulfonate (SDBS), sodium dodecyl sulfate and 4-(1,1,3,3-tetramethylbutyl) phenyl-polyethylene glycol (Triton X-100) were used as ionic and non-ionic surfactants. The effects of surfactant concentrations on the dispersibility and electrical conductivity of the surface modified graphene were investigated. The dispersion stability of SDBS functionalized graphene (SDBS-G) was found to be best in water at 1.5 mg ml{sup −1}. X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy analysis indicate that the presence of surfactants does not prevent the reduction of graphene oxide (GO). These measurements also demonstrated that the surfactants were present on the surface of graphene, resulting in the formation of functionalized graphene. The thickness of different functionalized graphene was measured by Atomic force microscopy and varied significantly with different surfactants. The thermal properties of the functionalized graphene were also found to be dependent on the nature of the surfactants. The electrical conductivity of SDBS-G (108 S m{sup −1}) was comparatively higher than SDS and Triton X-100 functionalized graphene.

  10. Effects of various surfactants on the dispersion stability and electrical conductivity of surface modified graphene

    International Nuclear Information System (INIS)

    Uddin, Md. Elias; Kuila, Tapas; Nayak, Ganesh Chandra; Kim, Nam Hoon; Ku, Bon-Cheol; Lee, Joong Hee

    2013-01-01

    Highlights: ► Water dispersible graphene has been prepared using ionic and non-ionic surfactants. ► XPS and FTIR spectra analysis confirm surface modification and reduction of GO. ► The highest water dispersibility is observed in the graphene modified with of SDBS. ► The best properties of modified graphene is achieved with GO/surfactant ratio of two. -- Abstract: Ionic and non-ionic surfactant functionalized, water dispersible graphene were prepared to investigate the effects on the dispersion stability and electrical conductivity of graphene. In this study, sodium dodecyl benzene sulfonate (SDBS), sodium dodecyl sulfate and 4-(1,1,3,3-tetramethylbutyl) phenyl-polyethylene glycol (Triton X-100) were used as ionic and non-ionic surfactants. The effects of surfactant concentrations on the dispersibility and electrical conductivity of the surface modified graphene were investigated. The dispersion stability of SDBS functionalized graphene (SDBS-G) was found to be best in water at 1.5 mg ml −1 . X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy analysis indicate that the presence of surfactants does not prevent the reduction of graphene oxide (GO). These measurements also demonstrated that the surfactants were present on the surface of graphene, resulting in the formation of functionalized graphene. The thickness of different functionalized graphene was measured by Atomic force microscopy and varied significantly with different surfactants. The thermal properties of the functionalized graphene were also found to be dependent on the nature of the surfactants. The electrical conductivity of SDBS-G (108 S m −1 ) was comparatively higher than SDS and Triton X-100 functionalized graphene

  11. [Exogenous surfactant therapy: new synthetic surfactants].

    Science.gov (United States)

    Lacaze-Masmonteil, Th

    2008-06-01

    There are numerous pulmonary conditions in which qualitative or quantitative anomalies of the surfactant system have been demonstrated. In premature newborns with immature lungs, a functional deficit in surfactant is the main physiopathologic mechanism of the neonatal respiratory distress syndrome (RDS). Since the landmark pilot study of Fujiwara, published more than 20 years ago, the efficacy of exogenous surfactant for the treatment of neonatal RDS has been established by numerous controlled studies and meta-analyses. Enlightened by a growing insight into both the structure and function of the different surfactant components, a new generation of synthetic surfactants has been developed. Various complementary approaches have confirmed the fundamental role of the two hydrophobic proteins, SP-B and SP-C, in the surfactant system, thus opening the way to the design of analogues, either by chemical synthesis or expression in a prokaryotic system. An example of these peptide-containing synthetic surfactant preparations, lucinactant (Surfaxin), has been recently tested in comparison to a synthetic surfactant that does not contain protein as well as to animal derived surfactant preparations. Major clinical outcomes between lucinactant and animal-derived surfactant preparations were fund similar in two randomized controlled trials, opening the way to a new generation of synthetic surfactants in the near future.

  12. Fluorine-18 - ED 4311

    International Nuclear Information System (INIS)

    Ammerich, M.; Frot, P.; Gambini, D.; Gauron, C.; Moureaux, P.; Herbelet, G.; Lahaye, T.; Pihet, P.; Rannou, A.; Vidal, E.

    2013-03-01

    This sheet presents the characteristics of fluorine-18, its origin, and its radio-physical and biological properties. It briefly describes its use in nuclear medicine. It indicates its dosimetric parameters for external exposure, cutaneous contamination, and internal exposure due to acute contamination or to chronic contamination. It indicates and comments the various exposure measurement techniques: ambient dose rate measurement, surface contamination measurement, atmosphere contamination. It addresses the means of protection: premise design, protection against external exposure and against internal exposure. It describes how areas are delimited and controlled within the premises: regulatory areas, controls to be performed. It addresses the personnel classification, training and medical survey. It addresses the issue of solid and liquid wastes and liquid effluents. It briefly recalls the administrative procedures related to the authorization and declaration of possession and use of sealed and unsealed sources. It indicates regulatory aspects related to the transport of fluorine-18, describes what is to be done in case of incident or accident (for the different types of contamination or exposure)

  13. Negative electrospray ionisation of fluorotelomer alcohols (FTOH) and FTOH-derived acrylate surfactants by liquid chromatography coupled to accurate (tandem) mass spectrometry

    DEFF Research Database (Denmark)

    Trier, Xenia; Christensen, Jan H.; Niessen, Wilfried M. A.

    Fluorotelomer alcohols (FTOHs) are used to synthesize fluorinated surfactants, which form bioaccumulative perfluorinated degradation products, which are toxic to humans and the environment. To facilitate screening for FTOH-derived surfactants by LC-ESI–-MS, we identified product ions of FTOHs...

  14. Modification of the activity of an alpha-amylase from Bacillus licheniformis by several surfactants

    OpenAIRE

    Bravo Rodríguez,Vicente; Jurado Alameda,Encarnación; Martínez Gallegos,Juan Francisco; Reyes Requena,Antonia; García López,Ana Isabel; Sampaio Cabral,Joaquim Manuel; Fernandes,Pedro; Pina da Fonseca,Luis Joaquim

    2006-01-01

    The influence of different commercial surfactants on the enzymatic activity of a commercial alpha-amylase from Bacillus licheniformis (Termamyl 300 L) has been studied. As non-ionic surfactants, alkyl polyglycosides (Glucopon® 215, Glucopon® 600 and Glucopon® 650) were studied, as were fatty alcohol ethoxylates (Findet 1214N/23 and Findet 10/15), and nonyl phenol ethoxylate (Findet 9Q/21.5NF). Also, an anionic surfactant, linear alkyl benzene sulfonate (LAS) was assayed. In general, none of t...

  15. Are the nonionic contrast media really safe

    International Nuclear Information System (INIS)

    Seyferth, W.; Zeitler, E.

    1987-01-01

    The authors used a wide variety of ionic and nonionic contrast media in 11,203 patient examinations (angiography, phlebography, CT). Data have been collected in prospective studies since 1982. The rate of mild side effects was reduced by a factor of 2 to 3 for all examinations when nonionic contrast media were used. Angiography may not be suitable for evaluating the safety of contrast media. Because of statistical requirements, the influence of nonionic media on the rate of severe side effects will not be known for some time. The side effects of nonionic contrast media were somewhat delayed, and differed from times reported in the literature: 29% of wide effects were noticed within 15 minutes and 71% between 25 minutes to 72 hours after the study. The final results of the study will have numerous consequences for patient treatment protocols

  16. 77 FR 32146 - Safety Evaluation Report, International Isotopes Fluorine Products, Inc., Fluorine Extraction...

    Science.gov (United States)

    2012-05-31

    ..., International Isotopes Fluorine Products, Inc., Fluorine Extraction Process and Depleted Uranium Deconversion... license to International Isotopes Fluorine Products, Inc., (IIFP or the applicant) to authorize construction and operations of a depleted uranium deconversion facility and possession and use of source...

  17. Surfactant effects on protein structure examined by electrospray ionization mass spectrometry.

    Science.gov (United States)

    Loo, R. R.; Dales, N.; Andrews, P. C.

    1994-01-01

    Electrospray ionization mass spectrometry (ESI-MS) has proven to be a useful tool for examining noncovalent complexes between proteins and a variety of ligands. It has also been used to distinguish between denatured and refolded forms of proteins. Surfactants are frequently employed to enhance solubilization or to modify the tertiary or quaternary structure of proteins, but are usually considered incompatible with mass spectrometry. A broad range of ionic, nonionic, and zwitterionic surfactants was examined to characterize their effects on ESI-MS and on protein structure under ESI-MS conditions. Solution conditions studied include 4% acetic acid/50% acetonitrile/46% H2O and 100% aqueous. Of the surfactants examined, the nonionic saccharides, such as n-dodecyl-beta-D-glucopyranoside, at 0.1% to 0.01% (w/v) concentrations, performed best, with limited interference from chemical background and adduct formation. Under the experimental conditions used, ESI-MS performance in the presence of surfactants was found to be unrelated to critical micelle concentration. It is demonstrated that surfactants can affect both the tertiary and quaternary structures of proteins under conditions used for ESI-MS. However, several of the surfactants caused significant shifts in the charge-state distributions, which appeared to be independent of conformational effects. These observations suggest that surfactants, used in conjunction with ESI-MS, can be useful for protein structure studies, if care is used in the interpretation of the results. PMID:7703844

  18. Fluorination by fusion

    International Nuclear Information System (INIS)

    Gray, J.H.

    1986-01-01

    LECO crucibles and incinerator ash are two waste categories that cannot be discarded due to the presence of insoluble transuranics. Current chemical processing methods are not too effective, requiring a number of repeated operations in order to dissolve more than half the transuranics. An alternate dissolution approach has been developed involving the use of ammonium bifluoride. Low temperature fusion of the waste with ammonium bifluoride is followed by dissolution of the fused material in boiling nitric acid solutions. Greater than 60% of the transuranics contained in LECO crucibles and greater than 95% of the transuranics mixed with the incinerator ash are dissolved after a single fusion and dissolution step. Fluorination of the transuranics along with other impurities appears to render the waste material soluble in nitric acid

  19. Effect of surfactants on the spectrofluorimetric properties of zearalenone

    International Nuclear Information System (INIS)

    Appell, Michael; Bosma, Wayne B.

    2011-01-01

    The chemiluminescent properties of the estrogenic mycotoxin zearalenone in the presence of aqueous micellar media were investigated using steady state fluorescence techniques. Micelles of surfactants sodium dodecyl sulfate (SDS), hexadecyltrimethylammonium bromide (CTAB), and non-ionic Triton X-100 enhanced the fluorescence intensity of zearalenone in aqueous solutions. The binding constants have been determined and indicate zearalenone has the highest affinity for Triton X-100, followed by CTAB, and then by SDS. The encapsulation of zearalenone by the micelles studied is spontaneous and exothermic. The selective microenvironments provided by organized micellar systems offer an attractive medium to modulate fluorescence detection of zearalenone. - Highlights: → Surfactants can selectively modulate the fluorescence detection of zearalenone. → Binding studies provide information on the zearalenone-surfactant interactions. → Fluorescence intensity of zearalenone is related to the micelle microenvironment.

  20. Tuning of depletion interaction in nanoparticle-surfactant systems

    International Nuclear Information System (INIS)

    Ray, D.; Aswal, V. K.

    2014-01-01

    The interaction of anionic silica nanoparticles (Ludox LS30) and non-ionic surfactants decaethylene glycol monododecylether (C12E10) without and with anionic sodium dodecyl sulfate (SDS) in aqueous electrolyte solution has been studied by small-angle neutron scattering (SANS). The measurements have been carried out for fixed concentrations of nanoparticle (1 wt%), surfactants (1 wt%) and electrolyte (0.1 M NaCl). Each of these nanoparticlesurfactant systems has been examined for different contrast conditions where individual components (nanoparticle or surfactant) are made visible. It is observed that the nanoparticle-C12E10 system leads to the depletion-induced aggregation of nanoparticles. The system however behaves very differently on addition of SDS where depletion interaction gets suppressed and aggregation of nanoparticles can be prevented. We show that C12E10 and SDS form mixed micelles and the charge on these micelles plays important role in tuning the depletion interaction

  1. Tuning of depletion interaction in nanoparticle-surfactant systems

    Energy Technology Data Exchange (ETDEWEB)

    Ray, D., E-mail: debes@barc.gov.in; Aswal, V. K., E-mail: debes@barc.gov.in [Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai-400085 (India)

    2014-04-24

    The interaction of anionic silica nanoparticles (Ludox LS30) and non-ionic surfactants decaethylene glycol monododecylether (C12E10) without and with anionic sodium dodecyl sulfate (SDS) in aqueous electrolyte solution has been studied by small-angle neutron scattering (SANS). The measurements have been carried out for fixed concentrations of nanoparticle (1 wt%), surfactants (1 wt%) and electrolyte (0.1 M NaCl). Each of these nanoparticlesurfactant systems has been examined for different contrast conditions where individual components (nanoparticle or surfactant) are made visible. It is observed that the nanoparticle-C12E10 system leads to the depletion-induced aggregation of nanoparticles. The system however behaves very differently on addition of SDS where depletion interaction gets suppressed and aggregation of nanoparticles can be prevented. We show that C12E10 and SDS form mixed micelles and the charge on these micelles plays important role in tuning the depletion interaction.

  2. Tuning of depletion interaction in nanoparticle-surfactant systems

    Science.gov (United States)

    Ray, D.; Aswal, V. K.

    2014-04-01

    The interaction of anionic silica nanoparticles (Ludox LS30) and non-ionic surfactants decaethylene glycol monododecylether (C12E10) without and with anionic sodium dodecyl sulfate (SDS) in aqueous electrolyte solution has been studied by small-angle neutron scattering (SANS). The measurements have been carried out for fixed concentrations of nanoparticle (1 wt%), surfactants (1 wt%) and electrolyte (0.1 M NaCl). Each of these nanoparticlesurfactant systems has been examined for different contrast conditions where individual components (nanoparticle or surfactant) are made visible. It is observed that the nanoparticle-C12E10 system leads to the depletion-induced aggregation of nanoparticles. The system however behaves very differently on addition of SDS where depletion interaction gets suppressed and aggregation of nanoparticles can be prevented. We show that C12E10 and SDS form mixed micelles and the charge on these micelles plays important role in tuning the depletion interaction.

  3. Thermally cleavable surfactants

    Science.gov (United States)

    McElhanon, James R [Manteca, CA; Simmons, Blake A [San Francisco, CA; Zifer, Thomas [Manteca, CA; Jamison, Gregory M [Albuquerque, NM; Loy, Douglas A [Albuquerque, NM; Rahimian, Kamyar [Albuquerque, NM; Long, Timothy M [Urbana, IL; Wheeler, David R [Albuquerque, NM; Staiger, Chad L [Albuquerque, NM

    2006-04-04

    Two new surfactant molecules are reported which contain thermally labile Diels-Alder adducts connecting the polar and non-polar sections of each molecule. The two surfactants possess identical non-polar dodecyl tail segments but exhibit different polar headgroups. The surfactants become soluble in water when anionic salts are formed through the deprotonation of the surfactant headgroups by the addition of potassium hydroxide. When either surfactant is exposed to temperature above about 60.degree. C., the retro Diels-Alder reaction occurs, yielding hydrophilic and hydrophobic fragments and the aqueous solutions of the surfactants subsequently exhibit loss of all surface-active behavior.

  4. Thermally cleavable surfactants

    Science.gov (United States)

    McElhanon, James R [Manteca, CA; Simmons, Blake A [San Francisco, CA; Zifer, Thomas [Manteca, CA; Jamison, Gregory M [Albuquerque, NM; Loy, Douglas A [Albuquerque, NM; Rahimian, Kamyar [Albuquerque, NM; Long, Timothy M [Urbana, IL; Wheeler, David R [Albuquerque, NM; Staiger, Chad L [Albuquerque, NM

    2009-11-24

    Two new surfactant molecules are reported which contain thermally labile Diels-Alder adducts connecting the polar and non-polar sections of each molecule. The two surfactants possess identical non-polar dodecyl tail segments but exhibit different polar headgroups. The surfactants become soluble in water when anionic salts are formed through the deprotonation of the surfactant headgroups by the addition of potassium hydroxide. When either surfactant is exposed to temperature above about 60.degree. C., the retro Diels-Alder reaction occurs, yielding hydrophilic and hydrophobic fragments or the aqueous solutions of the surfactants subsequently exhibit loss of all surface-active behavior.

  5. Rapid crystallization and morphological adjustment of zeolite ZSM-5 in nonionic emulsions

    Science.gov (United States)

    Zhang, Ying; Jin, Chao

    2011-01-01

    Zeolite ZSM-5 was synthesized for the first time in a nonionic emulsion composed of polyoxyethylated alkylphenol, butanol, cyclohexane and tetraethylammonium hydroxide (TEAOH)-containing zeolite synthesis mixture. The crystallization kinetics in the emulsion was investigated and the ZSM-5 product was characterized in detail by XRD, SEM, FT-IR, TG, N 2 adsorption and CHN analysis techniques. Compared with the conventionally hydrothermal synthesis with the same structure directing agent TEAOH, the emulsion system allows rapid crystallization of ZSM-5. The ZSM-5 product exhibits unusual agglomerated structure and possesses larger specific surface area. The FT-IR, TG results plus CHN analysis show the encapsulation of a trace of emulsion components in the emulsion ZSM-5. Control experiments show the emulsion system exerts the crystallization induction and morphological adjustment effects mainly during the aging period. The effects are tentatively attributed to the confined space domains, surfactant-water interaction as well as surfactant-growing crystals interaction existing in the emulsion.

  6. Effect of surfactants on the penetration of 14C-glyphosate in Cyperus rotundus in Pakistani agroclimatic conditions

    International Nuclear Information System (INIS)

    Jamil Qureshi, M.; Anwarul Haq; Uzma Maqbool

    1998-01-01

    The penetration of 14 C-glyphosate was studied in Cyperus rotundus with three nonionic surfactants. Among the three surfactants Synperonic A20 was more effective than A2 and A7 in enhancing penetration of glyphosate 24 hours after treatment both in dry and wet seasons. The addition of diesel oil to Synperonic A20 further increased penetration of glyphosate in both seasons. (author)

  7. Rheological properties and physical stability of ecological emulsions stabilized by a surfactant derived from cocoa oil and high pressure homogenization

    OpenAIRE

    Trujillo-Cayado, L. A.; Natera, A.; García, M. C.; Muñoz, J.; Alfaro, M. C.

    2015-01-01

    The goal of this work was to investigate the influence of the emulsification method on the rheological properties, droplet size distribution and physical stability of O/W green emulsions formulated with an eco-friendly surfactant derived from cocoa oil. The methodology used can be applied to other emulsions. Polyoxyethylene glycerol esters are non-ionic surfactants obtained from a renewable source which fulfill the environmental and toxicological requirements to be used as eco-fri...

  8. How chain length and charge affect surfactant denaturation of acyl coenzyme a binding protein (ACBP)

    DEFF Research Database (Denmark)

    Andersen, Kell; Otzen, Daniel

    2009-01-01

    Using intrinsic tryptophan fluorescence, equilibria and kinetics of unfolding of acyl coenzyme A binding protein (ACBP) have been investigated in sodium alkyl sulfate surfactants of different chain length (8-16 carbon atoms) and with different proportions of the nonionic surfactant dodecyl...... maltoside (DDM). The aim has been to determine how surfactant chain length and micellar charge affect the denaturation mechanism. ACBP denatures in two steps irrespective of surfactant chain length, but with increasing chain length, the potency of the denaturant rises more rapidly than the critical micelle...... constants increases linearly with denaturant concentration below the cmc but declines at higher concentrations. Both shortening chain length and decreasing micellar charge reduce the overall kinetics of unfolding and makes the dependence of unfolding rate constants on surfactant concentration more complex...

  9. Surfactant selection for a liquid foam-bed photobioreactor.

    Science.gov (United States)

    Janoska, Agnes; Vázquez, María; Janssen, Marcel; Wijffels, René H; Cuaresma, María; Vílchez, Carlos

    2018-02-01

    A novel liquid foam-bed photobioreactor has been shown to hold potential as an innovative technology for microalgae production. In this study, a foam stabilizing agent has been selected which fits the requirements of use in a liquid foam-bed photobioreactor. Four criteria were used for an optimal surfactant: the surfactant should have good foaming properties, should not be rapidly biodegradable, should drag up microalgae in the foam formed, and it should not be toxic for microalgae. Ten different surfactants (nonionic, cationic, and anionic) and two microalgae genera (Chlorella and Scenedesmus) were compared on the above-mentioned criteria. The comparison showed the following facts. Firstly, poloxameric surfactants (Pluronic F68 and Pluronic P84) have acceptable foaming properties described by intermediate foam stability and liquid holdup and small bubble size. Secondly, the natural surfactants (BSA and Saponin) and Tween 20 were easily biodegraded by bacteria within 3 days. Thirdly, for all surfactants tested the microalgae concentration is reduced in the foam phase compared to the liquid phase with exception of the cationic surfactant CTAB. Lastly, only BSA, Saponin, Tween 20, and the two Pluronics were not toxic at concentrations of 10 CMC or higher. The findings of this study indicate that the Pluronics (F68 and P84) are the best surfactants regarding the above-mentioned criteria. Since Pluronic F68 performed slightly better, this surfactant is recommended for application in a liquid foam-bed photobioreactor. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 2018. © 2018 American Institute of Chemical Engineers.

  10. Immobilization of enzymes using non-ionic colloidal liquid aphrons (CLAs): Surface and enzyme effects.

    Science.gov (United States)

    Ward, Keeran; Xi, Jingshu; Stuckey, David C

    2015-12-01

    The use of non-ionic colloidal liquid aphrons (CLAs) as a support for enzyme immobilisation was investigated. Formulation required the mixing of an aqueous-surfactant solution with a relatively non-polar solvent-surfactant solution, forming a solvent droplet surrounded by a thin stabilised aqueous film (soapy shell). Studies utilising anionic surfactants have showed increased retention, however, very little have been understood about the forces governing immobilisation. This study seeks to determine the effects of enzyme properties on CLA immobilisation by examining a non-ionic/non-polar solvent system comprised of two non-ionic surfactants, Tween 20 and 80, mineral oil and the enzymes lipase, aprotinin and α-chymotrypsin. From these results it was deduced that hydrophobic interactions strongly governed immobilisation. Confocal Scanning Laser Microscopy (CSLM) revealed that immobilisation was predominantly achieved by surface adsorption attributed to hydrophobic interactions between the enzyme and the CLA surface. Enzyme surface affinity was found to increase when added directly to the formulation (pre-manufacture addition), as opposed to the bulk continuous phase (post-manufacture addition), with α-chymotrypsin and aprotinin being the most perturbed, while lipase was relatively unaffected. The effect of zeta potential on immobilisation showed that enzymes adsorbed better closer to their pI, indicating that charge minimisation was necessary for immobilisation. Finally, the effect of increasing enzyme concentration in the aqueous phase resulted in an increase in adsorption for all enzymes due to cooperativity between protein molecules, with saturation occurring faster at higher adsorption rates. Copyright © 2015 Elsevier B.V. All rights reserved.

  11. Determination of the critical micelle concentration in simulations of surfactant systems

    International Nuclear Information System (INIS)

    Santos, Andrew P.; Panagiotopoulos, Athanassios Z.

    2016-01-01

    Alternative methods for determining the critical micelle concentration (cmc) are investigated using canonical and grand canonical Monte Carlo simulations of a lattice surfactant model. A common measure of the cmc is the “free” (unassociated) surfactant concentration in the presence of micellar aggregates. Many prior simulations of micellizing systems have observed a decrease in the free surfactant concentration with overall surfactant loading for both ionic and nonionic surfactants, contrary to theoretical expectations from mass-action models of aggregation. In the present study, we investigate a simple lattice nonionic surfactant model in implicit solvent, for which highly reproducible simulations are possible in both the canonical (NVT) and grand canonical (μVT) ensembles. We confirm the previously observed decrease of free surfactant concentration at higher overall loadings and propose an algorithm for the precise calculation of the excluded volume and effective concentration of unassociated surfactant molecules in the accessible volume of the solution. We find that the cmc can be obtained by correcting the free surfactant concentration for volume exclusion effects resulting from the presence of micellar aggregates. We also develop an improved method for determination of the cmc based on the maximum in curvature for the osmotic pressure curve determined from μVT simulations. Excellent agreement in cmc and other micellar properties between NVT and μVT simulations of different system sizes is observed. The methodological developments in this work are broadly applicable to simulations of aggregating systems using any type of surfactant model (atomistic/coarse grained) or solvent description (explicit/implicit)

  12. Determination of the critical micelle concentration in simulations of surfactant systems

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Andrew P.; Panagiotopoulos, Athanassios Z., E-mail: azp@princeton.edu [Department of Chemical and Biological Engineering, Princeton University, Princeton, New Jersey 08544 (United States)

    2016-01-28

    Alternative methods for determining the critical micelle concentration (cmc) are investigated using canonical and grand canonical Monte Carlo simulations of a lattice surfactant model. A common measure of the cmc is the “free” (unassociated) surfactant concentration in the presence of micellar aggregates. Many prior simulations of micellizing systems have observed a decrease in the free surfactant concentration with overall surfactant loading for both ionic and nonionic surfactants, contrary to theoretical expectations from mass-action models of aggregation. In the present study, we investigate a simple lattice nonionic surfactant model in implicit solvent, for which highly reproducible simulations are possible in both the canonical (NVT) and grand canonical (μVT) ensembles. We confirm the previously observed decrease of free surfactant concentration at higher overall loadings and propose an algorithm for the precise calculation of the excluded volume and effective concentration of unassociated surfactant molecules in the accessible volume of the solution. We find that the cmc can be obtained by correcting the free surfactant concentration for volume exclusion effects resulting from the presence of micellar aggregates. We also develop an improved method for determination of the cmc based on the maximum in curvature for the osmotic pressure curve determined from μVT simulations. Excellent agreement in cmc and other micellar properties between NVT and μVT simulations of different system sizes is observed. The methodological developments in this work are broadly applicable to simulations of aggregating systems using any type of surfactant model (atomistic/coarse grained) or solvent description (explicit/implicit)

  13. Gemini (dimeric) Surfactants

    Indian Academy of Sciences (India)

    Gemini, surfactants, micelle. Figure 1. Schematic repre- sentation of the gemini sur- factant structure. B S Sekhon. A gemini surfactant (GS) consists of two conventional surfactant molecules chemically bonded together by a spacer. The two terminal hydrocarbon tails can be short or long; the two polar head groups can be ...

  14. Effect of chemical and biological surfactants on activated sludge of MBR system: microscopic analysis and foam test.

    Science.gov (United States)

    Capodici, Marco; Di Bella, Gaetano; Nicosia, Salvatore; Torregrossa, Michele

    2015-02-01

    A bench-scale MBR unit was operated, under stressing condition, with the aim of stimulating the onset of foaming in the activated sludge. Possible synergies between synthetic surfactants in the wastewater and biological surfactants (Extra-Cellular Polymeric Substances, EPSs) were investigated by changing C/N ratio. The growth of filamentous bacteria was also discussed. The MBR unit provided satisfactory overall carbon removal overall efficiencies: in particular, synthetic surfactants were removed with efficiency higher than 90% and 95% for non-ionic and ionic surfactants, respectively. Lab investigation suggested also the importance to reduce synthetic surfactants presence entering into mixed liquor: otherwise, their presence can significantly worsen the natural foaming caused by biological surfactants (EPSs) produced by bacteria. Finally, a new analytic method based on "ink test" has been proposed as a useful tool to achieve a valuation of EPSs bound fraction. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Fluorinated Phosphorene: Electrochemical Synthesis, Atomistic Fluorination, and Enhanced Stability.

    Science.gov (United States)

    Tang, Xian; Liang, Weiyuan; Zhao, Jinlai; Li, Zhongjun; Qiu, Meng; Fan, Taojian; Luo, Crystal Shaojuan; Zhou, Ye; Li, Yu; Guo, Zhinan; Fan, Dianyuan; Zhang, Han

    2017-12-01

    Phosphorene has attracted great interest due to its unique electronic and optoelectronic properties owing to its tunable direct and moderate band-gap in association with high carrier mobility. However, its intrinsic instability in air seriously hinders its practical applications, and problems of technical complexity and in-process degradation exist in currently proposed stabilization strategies. A facile pathway in obtaining and stabilizing phosphorene through a one-step, ionic liquid-assisted electrochemical exfoliation and synchronous fluorination process is reported in this study. This strategy enables fluorinated phosphorene (FP) to be discovered and large-scale, highly selective few-layer FP (3-6 atomic layers) to be obtained. The synthesized FP is found to exhibit unique morphological and optical characteristics. Possible atomistic fluorination configurations of FP are revealed by core-level binding energy shift calculations in combination with spectroscopic measurements, and the results indicate that electrolyte concentration significantly modulates the fluorination configurations. Furthermore, FP is found to exhibit enhanced air stability thanks to the antioxidation and antihydration effects of the introduced fluorine adatoms, and demonstrate excellent photothermal stability during a week of air exposure. These findings pave the way toward real applications of phosphorene-based nanophotonics. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. High Charge-Carrier Mobility of 2.5 cm(2) V(-1) s(-1) from a Water-Borne Colloid of a Polymeric Semiconductor via Smart Surfactant Engineering.

    Science.gov (United States)

    Cho, Jangwhan; Cheon, Kwang Hee; Ahn, Hyungju; Park, Kwang Hun; Kwon, Soon-Ki; Kim, Yun-Hi; Chung, Dae Sung

    2015-10-07

    Semiconducting polymer nanoparticles dispersed in water are synthesized by a novel method utilizing non-ionic surfactants. By developing a smart surfactant engineering technique involving a selective post-removal process of surfactants, an unprecedentedly high mobility of 2.51 cm(2) V(-1) s(-1) from a water-borne colloid is demonstrated for the first time. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Establishing turfgrass on water repellent soil with ethylene oxide-propylene oxide block copolymer surfactant seed coatings

    Science.gov (United States)

    Turfgrass managers can experience poor seeding success when trying to establish golf course greens and sports fields in water repellent soils. Nonionic soil surfactant formulations are commonly used to treat water repellent soils and subsequently increase water reserves for seed germination and plan...

  18. Pyrene removal from contaminated soil using electrokinetic process combined with surfactant

    Directory of Open Access Journals (Sweden)

    Seyed Enayat Hashemi

    2015-07-01

    Full Text Available Background: Pyrene is one of the stable polycyclic aromatic hydrocarbons that is considered as an important pollutants, because of extensive distribution in the environment and carcinogenic and mutagenic properties. Among the various treatment techniques, electrokinetic method is an environmental- friendly process for organic and mineral pollutants adsorbed to soil with fine pore size the same as clay and low hydraulic conductivity soils. For improving the efficiency of pyrene removal from soil, soulobilization of pyrene from soil could be used by surfactants. Materials and Methods : In this study, clay soil was selected as model because of the specific properties. Combined method using surfactant and electrokinetic was applied for pyrene removal from soil. Experiments were designed using response surface methodology (RSM, and effect of three variables includes surfactant concentration, voltage and surfactant type were evaluated for pyrene removal from contaminated soil. Results: Pyrene removal using anionic surfactants(SDS and nonionic surfactants(TX100 as a solubilizing agents has high removal efficiency. In the optimum condition with 95% confidence coefficient, utilizing mixed surfactants of sodium dodecyl sulfate and triton X-100 with the same volume, induced of 18.54 volt and 6.53 percent surfactant concentration have 94.6% pyrene removal efficiency. Conclusion:: Results of this study shows that electrokinetic process combined with surfactant as solubilizing agent could be applied as an efficient method for treating the pyrene-contaminated soils.

  19. End Functionalized Nonionic Water-Dispersible Conjugated Polymers.

    Science.gov (United States)

    Zhan, Ruoyu; Liu, Bin

    2017-09-01

    2,7-Dibromofluorene monomers carrying two or four oligo(ethylene glycol) (OEG) side chains are synthesized. Heck coupling between the monomers and 1,4-divinylbenzene followed by end capping with [4-(4-bromophenoxy)butyl]carbamic acid tert-butyl ester leads to two nonionic water-dispersible poly(fluorene-alt-1,4-divinylenephenylene)s end-functionalized with amine groups after hydrolysis. In water, the polymer with a lower OEG density (P1) has poor water dispersibility with a quantum yield of 0.24, while the polymer with a higher OEG density (P2) possesses excellent water-dispersibility with a high quantum yield of 0.45. Both polymers show fluorescence enhancement and blue-shifted absorption and emission maxima in the presence of surfactant sodium dodecyl sulfate and dodecyltrimethylammonium bromide. The polymers are also resistant to ionic strength with minimal nonspecific interactions to bovine serum albumin. When biotin is incorporated into the end of the polymer backbones through N-hydroxysuccinimide/amine coupling reaction, the biotinylated polymers interact specifically with streptavidin on solid surface. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Size-dependent interaction of silica nanoparticles with different surfactants in aqueous solution.

    Science.gov (United States)

    Kumar, Sugam; Aswal, Vinod K; Kohlbrecher, Joachim

    2012-06-26

    The size-dependent interaction of anionic silica nanoparticles with ionic (anionic and cationic) and nonionic surfactants has been studied using small-angle neutron scattering (SANS). The surfactants used are anionic sodium dodecyl sulfate (SDS), cationic dodecyltrimethyl ammonium bromide (DTAB), and nonionic decaoxyethylene n-dodecylether (C(12)E(10)). The measurements have been carried out for three different sizes of silica nanoparticles (8, 16, and 26 nm) at fixed concentrations (1 wt % each) of nanoparticles and surfactants. It is found that irrespective of the size of the nanoparticles there is no significant interaction evolved between like-charged nanoparticles and the SDS micelles leading to any structural changes. However, the strong attraction of oppositely charged DTAB micelles with silica nanoparticles results in the aggregation of nanoparticles. The number of micelles mediating the nanoparticle aggregation increases with the size of the nanoparticle. The aggregates are characterized by fractal structure where the fractal dimension is found to be constant (D ≈ 2.3) independent of the size of the nanoparticles and consistent with diffusion-limited-aggregation-type fractal morphology in these systems. In the case of nonionic surfactant C(12)E(10), micelles interact with the individual silica nanoparticles. The number of adsorbed micelles per nanoparticle increases drastically whereas the percentage of adsorbed micelles on nanoparticles decreases with the increase in the size of the nanoparticles.

  1. Non-ionic contrast media: are they obligatory?

    International Nuclear Information System (INIS)

    Halva, S.R.

    1993-01-01

    Author presents recommendations for nonionic contrast media application. They are more expensive but less toxic than ionic ones. In order to avoid side effects in many radiological examinations (phlebography, arteriography, coronarography, ventriculography) one should use nonionic contrast media. Another reason for application of nonionic contrast agents is young age of patient or his state of health

  2. Impact of surfactants on skin penetration of Dexpanthenol.

    Science.gov (United States)

    Laffleur, Flavia; Pschick, Stefan; Barthelmes, Jan; Hauptstein, Sabine; Bernkop-Schnürch, Andreas

    2017-05-03

    It was the aim of this study to evaluate the impact of nonionic and ionic surfactants on skin penetration of dexpanthenol. The relative potency of three surfactants (two nonionic and one ionic) as enhancers in the permeability of a series of compounds was investigated. The influence of the enhancers was also studied. For this purpose porcine abdominal skin was prepared and mounted on Franz diffusion cells, while different mixtures of Dexpanthenol containing Tween®85, SDS and Span®80 in concentrations of 0.5%, 1%, 2%, 5% (m/V) where evaluated in terms of their permeation enhancing effect. The amount of permeated drug was determined via HPLC analysis. Moreover, the cytotoxicity and skin irritating effect of the compounds were tested on Caco-2 cells. The cytotoxicity profile of Dexpanthenol showed no toxicity to the cells over 1 and 3 h of incubation. The permeation was evaluated over a time period of 180 min, whereas a ranking of SDS>Span>Tween could be determined as permeation enhancer. Taking these findings into consideration, concentration of 1% (w/w) surfactant showed the most promising results. The increase in flux based on low concentrations of enhancer was ascribed to their ability to reduce skin´s barrier and improve drug permeation. The results showed that the nature of enhancer greatly impacts cutaneous barrier impairment. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  3. FLUORINE IN COLORADO OIL SHALE.

    Science.gov (United States)

    Dyni, John R.; ,

    1985-01-01

    Oil shale from the lower part of the Eocene Green River Formation in the Piceance Creek Basin, Colorado, averages 0. 13 weight percent fluorine, which is about twice that found in common shales, but is the same as the average amount found in some oil shales from other parts of the world. Some fluorine may reside in fluorapatite; however, limited data suggest that cryolite may be quantitatively more important. To gain a better understanding of the detailed distribution of fluorine in the deeper nahcolite-bearing oil shales, cores were selected for study from two exploratory holes drilled in the northern part of the Piceance Creek Basin where the oil shales reach their maximum thickness and grade.

  4. Self-consistent field modeling of adsorption from polymer/surfactant mixtures.

    Science.gov (United States)

    Postmus, Bart R; Leermakers, Frans A M; Cohen Stuart, Martien A

    2008-06-01

    We report on the development of a self-consistent field model that describes the competitive adsorption of nonionic alkyl-(ethylene oxide) surfactants and nonionic polymer poly(ethylene oxide) (PEO) from aqueous solutions onto silica. The model explicitly describes the response to the pH and the ionic strength. On an inorganic oxide surface such as silica, the dissociation of the surface depends on the pH. However, salt ions can screen charges on the surface, and hence, the number of dissociated groups also depends on the ionic strength. Furthermore, the solvent quality for the EO groups is a function of the ionic strength. Using our model, we can compute bulk parameters such as the average size of the polymer coil and the surfactant CMC. We can make predictions on the adsorption behavior of either polymers or surfactants, and we have made adsorption isotherms, i.e., calculated the relationship between the surface excess and its corresponding bulk concentration. When we add both polymer and surfactant to our mixture, we can find a surfactant concentration (or, more precisely, a surfactant chemical potential) below which only the polymer will adsorb and above which only the surfactant will adsorb. The corresponding surfactant concentration is called the CSAC. In a first-order approximation, the surfactant chemical potential has the CMC as its upper bound. We can find conditions for which CMC model is to understand the experimental data from one of our previous articles. We managed to explain most, but unfortunately not all, of the experimental trends. At the end of the article we discuss the possibilities for improving the model.

  5. Surfactant loss control in chemical flooding spectroscopic and calorimetric study of adsorption and precipitation on reservoir minerals. Annual report, September 30, 1992--September 30 1995

    Energy Technology Data Exchange (ETDEWEB)

    Casteel, J. [Bartlesville Project Office, OK (United States)

    1996-07-01

    The aim of this research project was to investigate mechanisms governing adsorption and surface precipitation of flooding surfactants on reservoir minerals. Effects of surfactant structure, surfactant combinations, various inorganic and polymeric species, and solids mineralogy have been determined. A multi-pronged approach consisting of micro & nano spectroscopy, electrokinetics, surface tension and wettability is used in this study. The results obtained should help in controlling surfactant loss in chemical flooding and in developing optimum structures and conditions for efficient chemical flooding processes. During the three years contract period, adsorption of single surfactants and select surfactant mixtures was studied at the solid-liquid and gas-liquid interfaces. Alkyl xylene sulfonates, polyethoxylated alkyl phenols, octaethylene glycol mono n-decyl ether, and tetradecyl trimethyl ammonium chloride were the surfactants studied. Adsorption of surfactant mixtures of varying composition was also investigated. The microstructure of the adsorbed layer was characterized using fluorescence spectroscopy. Changes in interfacial properties such as wettability, electrokinetics and stability of reservoir minerals were correlated with the amounts of reagent adsorbed. Strong effects of the structure of the surfactant and position of functional groups were revealed. Changes of microstructure upon dilution (desorption) were also studied. Presence of the nonionic surfactants in mixed aggregate leads to shielding of the charge of ionic surfactants which in turn promotes aggregation but reduced electrostatic attraction between the charged surfactant and the mineral surface. Strong consequences of surfactant interactions in solution on adsorption as well as correlations between monomer concentration in mixtures and adsorption were revealed.

  6. Surfactant-based critical phenomena in microgravity

    Science.gov (United States)

    Kaler, Eric W.; Paulaitis, Michael E.

    1994-01-01

    The objective of this research project is to characterize by experiment and theoretically both the kinetics of phase separation and the metastable structures produced during phase separation in a microgravity environment. The particular systems we are currently studying are mixtures of water, nonionic surfactants, and compressible supercritical fluids at temperatures and pressures where the coexisting liquid phases have equal densities (isopycnic phases). In this report, we describe experiments to locate equilibrium isopycnic phases and to determine the 'local' phase behavior and critical phenomena at nearby conditions of temperature, pressure, and composition. In addition, we report the results of preliminary small angle neutron scattering (SANS) experiments to characterize microstructures that exist in these mixtures at different fluid densities.

  7. Fluorine, fluorite, and fluorspar in central Colorado

    Science.gov (United States)

    Wallace, Alan R.

    2010-01-01

    Fluorine (F) is a widespread element that was deposited in a variety of rocks, minerals, and geologic environments in central Colorado. It occurs as a trace element, as a major component of the mineral fluorite (CaFs), and as a major economic source of fluorine in fluorspar deposits, which are massive concentrations of fluorite. This study has compiled available geochemical analyses of rocks, both unmineralized and mineralized, to determine the distribution of fluorine in specific age-lithologic categories, ranging from 1.8-giga-annum (Ga) metamorphic rocks to modern soils, throughout central Colorado. It also draws upon field studies of fluorine-rich mineral deposits, including fluorspar deposits, to decipher the nearly two-billion-year-long geologic history of fluorine in the study area, with implications for mineral-resource evaluations and exploration. The resulting compilation provides an important inventory of the naturally occurring levels and sources of fluorine that ultimately weather, erode, and become part of surface waters that are used for domestic water supplies in densely populated areas along the Colorado Front Range. Most commonly, fluorine is a trace element in virtually all rocks in the region. In the 3,798 unmineralized rocks that were analyzed for fluorine in the study area, the average fluorine content was 1,550 parts per million (ppm). The median was 640 ppm, nearly identical to the average crustal abundance of 650 ppm, and some high-fluorine rocks in the Pikes Peak area skewed the average to a value much greater than the median. Most unmineralized age-lithologic rock suites, including Proterozoic metamorphic rocks, 1.7- and 1.4-Ga granitic batholiths, Cambrian igneous rocks, Phanerozoic sedimentary rocks, and Laramide and Tertiary igneous rocks, had median fluorine values of 400 to 740 ppm fluorine. In all suites, however, a small number of analyzed samples contained more than 1 percent (10,000 ppm) fluorine. The 1.1-Ga plutonic rocks

  8. Effect of surfactants and identification of metabolites on the biodegradation of fluoranthene by basidiomycetes fungal isolate Armillaria sp. F022.

    Science.gov (United States)

    Hadibarata, Tony; Kristanti, Risky Ayu

    2014-04-01

    The effects of structure and concentration of surfactants on the biodegradation of fluoranthene, a three rings polycyclic aromatic hydrocarbon in the aqueous phase, as well as their effects on the biodegradation and enzyme activity were investigated. The toxicity ranking of studied surfactants is: non-ionic Tween 80 Armillaria sp. F022 (>4,500 mg/L) was showed by Tween 80 (10 mg/L) culture, manifesting that the non-ionic surfactant present in the culture were beneficial to the fungal growth. Laccase showed the highest enzymes activity in all surfactants culture. Non-ionic Tween 80 showed a significant result for laccase activity (1,902 U/L) in the Armillaria sp. F022 culture. The increased enzymes cumulative activity may stem directly from the rising fluoranthene biodegradability as addition of appropriate surfactants. The biotransformation of fluoranthene was greatly improved by Tween 80, and totally fluoranthene degradation was obtained as Tween 80 was 10 mg/L. Two fluoranthene metabolites were isolated from the culture medium and analyzed by a thin layer chromatography, UV visible spectrometer and gas chromatography-mass spectrometry (GC-MS). The oxidation of fluoranthene is initiated by oxygenation at the C-2,3 positions resulting 9-fluorenone. At the end of experiment, one metabolite was detected in the culture extract and identified as phthalic acid. Evidently, Armillaria sp. F022 seems efficient, high effective and deserves further application on the enhanced bioremediation technologies for the treatment of fluoranthene-contaminated soil.

  9. Storing Fluorine In Graphitelike Carbon Fibers

    Science.gov (United States)

    Hung, Ching-Cheh

    1995-01-01

    Fluorine stored in graphite or graphitelike carbon fibers for later release and/or use in chemical reactions. Storage in carbon fibers eliminates difficulty and risk of using high-pressure tanks and pipes to hold corrosive gas. Storage in carbon fibers makes fluorine more readily accessible than does storage as constituent of metal fluoride. Carbon fibers heated to release stored fluorine, which draws away to vessel where reacts with material to be fluorinated, possibly at temperature other than release temperature. Alternatively, material to be fluorinated mixed or otherwise placed in contact with fibers and entire mass heated to or beyond release temperature.

  10. Spontaneous surface self-assembly in protein-surfactant mixtures: interactions between hydrophobin and ethoxylated polysorbate surfactants.

    Science.gov (United States)

    Tucker, Ian M; Petkov, Jordan T; Penfold, Jeffrey; Thomas, Robert K; Li, Peixun; Cox, Andrew R; Hedges, Nick; Webster, John R P

    2014-05-08

    The synergistic interactions between certain ethoxylated polysorbate nonionic surfactants and the protein hydrophobin result in spontaneous self-assembly at the air-water interface to form layered surface structures. The surface structures are characterized using neutron reflectivity. The formation of the layered surface structures is promoted by the hydrophobic interaction between the polysorbate alkyl chain and the hydrophobic patch on the surface of the globular hydrophobin and the interaction between the ethoxylated sorbitan headgroup and hydrophilic regions of the protein. The range of the ethoxylated polysorbate concentrations over which the surface ordering occurs is a maximum for the more hydrophobic surfactant polyoxyethylene(8) sorbitan monostearate. The structures at the air-water interface are accompanied by a profound change in the wetting properties of the solution on hydrophobic substrates. In the absence of the polysorbate surfactant, hydrophobin wets a hydrophobic surface, whereas the hydrophobin/ethoxylated polysorbate mixtures where multilayer formation occurs result in a significant dewetting of hydrophobic surfaces. The spontaneous surface self-assembly for hydrophobin/ethoxylated polysorbate surfactant mixtures and the changes in surface wetting properties provide a different insight into protein-surfactant interactions and potential for manipulating surface and interfacial properties and protein surface behavior.

  11. Effects of surfactant mixtures, including Corexit 9527, on bacterial oxidation of acetate and alkanes in crude oil

    Energy Technology Data Exchange (ETDEWEB)

    Bruheim, P.; Bredholt, H.; Eimhjellen, K. [Norwegian Univ. of Science and Technology, Trondheim (Norway). Dept. of Biotechnology

    1999-04-01

    Mixtures of nonionic and anionic surfactants, including Corexit 9527, were tested to determine their effects on bacterial oxidation of acetate and alkanes in crude oil by cells pregrown on these substrates. Corexit 9527 inhibited oxidation of the alkanes in crude oil by Acinetobacter calcoaceticus ATCC 31012, while Span 80, a Corexit 9527 constituent, markedly increased the oil oxidation rate. Another Corexit 9257 constituent, the negatively charged dioctyl sulfosuccinate (AOT), strongly reduced the oxidation rate. The combination of Span 80 and AOT increased the rate, but not as much as Span 80 alone increased it, which tentatively explained the negative effect of Corexit 9527. The results of acetate uptake and oxidation experiments indicated that the nonionic surfactants interacted with the acetate uptake system while the anionic surfactant interacted with the oxidation system of the bacteria. The overall effect of Corexit 9527 on alkane oxidation by A. calcoaceticus ATCC 31012 thus seems to be the sum of the independent effects of the individual surfactants in the surfactant mixture. When Rhodococcus sp. strain 094 was used, the alkane oxidation rate decreased to almost zero in the presence of a mixture of Tergitol 15-S-7 and AOT even though the Tergitol 15-S-7 surfactant increased the alkane oxidation rate and AOT did not affect it. This indicated that there was synergism between the two surfactants rather than an additive effect like that observed for A. calcoaceticus ATCC 31012.

  12. Surfactants in tribology

    CERN Document Server

    Biresaw, Girma

    2014-01-01

    Surface science and tribology play very critical roles in many industries. Manufacture and use of almost all consumer and industrial products rely on the application of advanced surface and tribological knowledge. The fourth in a series, Surfactants in Tribology, Volume 4 provides an update on research and development activities connecting surfactants and tribological phenomena. Written by renowned subject matter experts, the book demonstrates how improved design of surfactants can be harnessed to control tribological phenomena. Profusely illustrated and copiously referenced, the chapters also

  13. Sugar ester surfactants: enzymatic synthesis and applications in food industry.

    Science.gov (United States)

    Neta, Nair S; Teixeira, José A; Rodrigues, Lígia R

    2015-01-01

    Sugar esters are non-ionic surfactants that can be synthesized in a single enzymatic reaction step using lipases. The stability and efficiency of lipases under unusual conditions and using non-conventional media can be significantly improved through immobilization and protein engineering. Also, the development of de novo enzymes has seen a significant increase lately under the scope of the new field of synthetic biology. Depending on the esterification degree and the nature of fatty acid and/or sugar, a range of sugar esters can be synthesized. Due to their surface activity and emulsifying capacity, sugar esters are promising for applications in food industry.

  14. The Abundance of Interstellar Fluorine

    Science.gov (United States)

    Lauroesch, James T.

    2005-01-01

    The primary objective of this program was to obtain FUSE observations of the interstellar absorption lines of F I at 951 and 954 Angstroms to derive the abundance of fluorine toward the star HD 164816. The nucleosynthetic source(s) of fluorine are still a matter of debate - the present day abundance of fluorine can potentially constrain models for pulsationally driven dredge-up in asymptotic giant branch stars. An accurate measure for the depletion behavior of fluorine will determine whether it may be detectable in QSO absorption line systems - an unambiguous detection of fluorine at suitably high redshifts would provide the best evidence to date for the neutrino process in massive stars. Furthermore, due to its extreme reactivity, measurement of the gas-phase interstellar fluorine abundance is important for models of grain chemistry. Despite the importance of measuring the interstellar fluorine abundance, at the time of our proposal only one previous detection has been made due to the low relative abundance of fluorine, the lack of lines outside the far-UV, and the blending of the available F I transitions with lines of Hz. The star HD 164816 is associated with the Lagoon nebula (M8), and at a distance of approximately 1.5 kpc probes both distant and local gas. Beginning April 8th, 2004 FUSE FP-Split observations of the star HD 164816 were obtained for this program. This data became available in the FUSE data archive May 21, 2004, and these observations were then downloaded and we began our analysis. Our analysis procedure has involved (1) fitting stellar models to the FUSE spectra, (2) using the multiple lines of Hz and N I at other wavelengths in the FUSE bandpass to derive column densities for the lines of H2 and N I which are blended with the F I features at 951 and 954 angstroms (3) the measurement of the column densities of F I and the species O I and C1 I which are important species for the dis-entangling of dust and nucleosynthetic effects. As discussed in

  15. Influence of surfactants on the sorption of two chloroacetanilide in an Romanian chernozem soil.

    Science.gov (United States)

    Coroi, I G; De Wilde, T; Cara, M S; Jitareanu, G; Steurbaut, W

    2011-01-01

    Pesticides have been extensively used in modern agriculture. Due to the prevalent use, there have been serious problems generated by pesticides wastes which could eventually endanger water resources and human health. The development of technologies for the decontamination of soils and waters polluted by hydrophobic organic compounds has encouraged research into the use of non-ionic surfactants as potential agents for the enhanced solubilization and removal of contaminants from soils and sediments. Sorption of two chloroacetanilide herbicides, acetochlor and metolachlor was studied on a representative chernozem soil of the Main Agricultural Research Station Ezareni belonging to the "Ion Ionescu de la Brad" University of Agriculture and Veterinary Medicine lasi, Romania, in the presence and absence of surfactants. Three different non-ionic surfactants were selected: Tween-20, Synperonic 91/5 and Silwet L-77, to verify the influence of their presence on herbicide sorption at different concentrations. Our results showed that the sorption of the studied herbicides within the soil-water-non-ionic surfactant system was influenced by the presence of non-ionic surfactants. The n values obtained were lower than 1 for all pesticide-surfactant combinations, which indicates that the amount of acetochor and metolachlor sorbed decreased with an increase in pesticide concentration. The sorption of acetochlor increased in the following order: Acetochlor+Synperonic 91/5 < Acetochlor < Acetochlor+Tween-20 < Acetochlor+Silwet L-77. In the case of metolachlor+Synperonic and metolachlor+Silwet L-77, the Kf values were significantly higher than the Kf value of metolachlor+Tween-20 on soil, where a lower Kf value could be observed with however a higher n value which indicate a higher sorption capacity at higher concentrations.

  16. Effect of ionic surfactant on the self-assembly of triblock copolymer

    Science.gov (United States)

    Ray, D.; Kohlbrecher, J.; Aswal, V. K.

    2017-05-01

    The effect of anionic surfactant sodium dodecyl sulfate (SDS) on the self-assembly of PEO-PPO-PEO triblock copolymer in aqueous solution has been studied using small-angle neutron scattering (SANS). The measurements have been carried out for fixed concentrations (1 wt%) of block copolymer and surfactant, and at varying temperatures between 20 to 80°C. Micelles of pure ionic surfactants show little change in their sizes with increasing temperature, whereas structures of the non-ionic micelles increase significantly (sphere-to-rod transition for some block copolymers). Contrast variation SANS measurement suggests addition of SDS to aqueous copolymer solutions leads to the formation of mixed micelles. Interestingly, the self-assembly of block copolymer is found to get completely arrested by the ionic surfactant in the mixed micelles which gives a control over the block copolymer phase behavior.

  17. Rheologycal properties of sodium carboxymethylcellulose in the presence of electrolyte and mixed micelle of surfactants

    Directory of Open Access Journals (Sweden)

    Sovilj Verica J.

    2003-01-01

    Full Text Available One of the most significant aspects of polymer-surfactant interaction, from the practical point of view, is that of rheology control and viscosity enhancement. In the oppositely charged polyelectrolyte-surfactant system strong ionic interaction often leads to precipitation of the formed complex yielding serious problems. In this paper the interaction between anionic polyelectrolyte - sodium carboxymethylcellulose (NaCMC and cationic surfactant - cethyltrimethylammonium bromide (CTMAB has been investigated by rheological measurements. Addition of electrolyte NaBr and nonionic surfactant - Tween 80 reduced the binding strength, prevented the precipitation of the complex and increased the viscosity of the system. It was found that rheological properties are strong influenced by NaCMC-CTMAB interaction and the system exhibits either pseudoplastic or thixotropic or rheopectic behavior according to the intensity of interaction.

  18. Obtenção de argilas organofílicas purificadas através de tensoativos iônicos e não iônicos visando uso em fluidos de perfuração base óleo Getting purified organoclays by ionic and non-ionic surfactant aiming use in oil based drilling fluids

    Directory of Open Access Journals (Sweden)

    J. M. R. Costa

    2012-12-01

    Full Text Available Em perfurações de petróleo sensíveis ao contato com água, torna-se necessária a utilização de fluidos de perfuração base óleo. Nestes casos, utilizam-se argilas organofílicas, que são obtidas a partir de argilas bentoníticas purificadas e tratadas com a adição de tensoativos. A utilização do hidrociclone pode representar uma ferramenta eficiente e de custo acessível para purificar argilas naturais em escala industrial. Este trabalho tem por objetivo estudar a purificação de argilas bentoníticas utilizando-se um hidrociclone, visando o desenvolvimento de argilas organofílicas para uso em fluidos de perfuração base óleo. As caracterizações das amostras das argilas estudadas - Brasgel PA e Chocolate - foram efetuadas por meio das técnicas: análise granulométrica por difração de laser, difração de raios X (DRX e análise química por fluorescência de raios X. A caracterização das argilas organofílicas obtidas foi efetuada por meio dos seguintes métodos: DRX e por uma modificação do inchamento de Foster. Os resultados mostram que o processo de purificação foi eficiente na redução de impurezas presentes na bentonita e que a argila organofílica purificada tratada com Praepagen WB e Imidazolina Oléica Vegetal apresenta valores de inchamento de Foster em éster, óleo diesel e parafina superiores aos obtidos com argilas organofílicas sem purificação (natural, e evidenciando maior afinidade com o tensoativo Praepagen WB.Oil drilling in sensitive contact with water, becomes required the use of oil base drilling fluids. In these cases, organoclays are used, which are made from clay bentonite purified and treated with surfactants addition. The use of the hydrocyclone can be a effective tool and affordable for purifying clays in industrial scale. This work aims to study the purification of clays bentonite using a hydrocyclone, aiming to develop organoclays for use in oil base drilling fluids. The

  19. Genetics Home Reference: surfactant dysfunction

    Science.gov (United States)

    ... Email Facebook Twitter Home Health Conditions Surfactant dysfunction Surfactant dysfunction Printable PDF Open All Close All Enable Javascript to view the expand/collapse boxes. Description Surfactant dysfunction is a lung disorder that causes breathing ...

  20. Study of adjuvant effect of model surfactants from the groups of alkyl sulfates, alkylbenzene sulfonates, alcohol ethoxylates and soaps

    DEFF Research Database (Denmark)

    Clausen, S K; Sobhani, S; Poulsen, O M

    2000-01-01

    The sodium salts of representatives of anionic surfactants, dodecylbenzene sulfonate (SDBS), dodecyl sulfate (SDS) and coconut oil fatty acids, and a nonionic surfactant, dodecyl alcohol ethoxylate, were studied for adjuvant effect on the production of specific IgE antibodies in mice....... The surfactants were injected subcutaneously (sc) in concentrations of 1000, 100, 10 or 1 mg/l, respectively, together with 1 microg of ovalbumin (OVA). In addition, groups of mice received OVA in saline (control group) or in Al(OH)(3) (positive adjuvant control group). After the primary immunization the mice...... that a limited number of surfactants possess an adjuvant effect whereas all surfactants at certain levels can suppress specific IgE production....

  1. Atypical effects of incorporated surfactants on stability and dissolution properties of amorphous polymeric dispersions.

    Science.gov (United States)

    Al-Obaidi, Hisham; Lawrence, M Jayne; Buckton, Graham

    2016-11-01

    To understand the impact of ionic and non-ionic surfactants on the dissolution and stability properties of amorphous polymeric dispersions using griseofulvin (GF) as a model for poorly soluble drugs. Solid dispersions of the poorly water-soluble drug, griseofulvin (GF) and the polymers, poly(vinylpyrrolidone) (PVP) and poly(2-hydroxypropyl methacrylate) (PHPMA), have been prepared by spray drying and bead milling and the effect of the ionic and non-ionic surfactants, namely sodium dodecyl sulphate (SDS) and Tween-80, on the physico-chemical properties of the solid dispersions studied. The X-ray powder diffraction data and hot-stage microscopy showed a fast re-crystallisation of GF. While dynamic vapour sorption (DVS) measurements indicated an increased water uptake, slow dissolution rates were observed for the solid dispersions incorporating surfactants. The order by which surfactants free dispersions were prepared seemed critical as indicated by DVS and thermal analysis. Dispersions prepared by milling with SDS showed significantly better stability than spray-dried dispersions (drug remained amorphous for more than 6 months) as well as improved dissolution profile. We suggest that surfactants can hinder the dissolution by promoting aggregation of polymeric chains, however that effect depends mainly on how the particles were prepared. © 2016 Royal Pharmaceutical Society.

  2. Green Cosmetic Surfactant from Rice: Characterization and Application

    Directory of Open Access Journals (Sweden)

    Ibrahim Hanno

    2015-10-01

    Full Text Available During recent years, microwave irradiation has been extensively used for performing green organic synthesis. The aim of this study was to synthesize, through a microwave-assisted irradiation process, a natural surfactant with O/W emulsifying properties. Our attention was focused on polyglycerol esters of fatty acids that are biocompatible and biodegradable non-ionic surfactants widely used in food and cosmetic products. The emulsifier was obtained using vegetable raw material from renewable sources: polyglycerol derived from vegetable glycerol and rice bran oil fatty acids. The natural emulsifier obtained was then characterized and evaluated for its emulsifying properties using different doses, oil phases, rheological additives, waxes, etc. The potential application in solar products, in comparison with other natural emulsifiers, was also evaluated.

  3. Fundamentals of surfactant sputtering

    International Nuclear Information System (INIS)

    Hofsaess, Hans; Zhang Kun

    2009-01-01

    We introduce a new sputter technique, utilizing the steady-state coverage of a substrate surface with up to 10 16 cm -2 of foreign atoms simultaneously during sputter erosion by combined ion irradiation and atom deposition. These atoms strongly modify the substrate sputter yield on atomic to macroscopic length scales and therefore act as surfactant atoms (a blend of 'surface active agent'). Depending on the surfactant-substrate combination, the novel technique allows enhanced surface smoothing, generation of novel surface patterns, shaping of surfaces and formation of ultra-thin films. Sputter yield attenuation is demonstrated for sputtering of Si and Fe substrates and different surfactant species using 5 keV Xe ions at different incidence angles and fluences up to 10 17 cm -2 . Analytical approaches and Monte Carlo simulations are used to predict the sputtering yield attenuation as function of surfactant coverage. For sputtering of Si with Au surfactants we observe high sputter yields despite a steady-state surfactant coverage, which can be explained by strong ion-induced interdiffusion of substrate and surfactant atoms and the formation of a buried Au x Si surfactant layer in dynamic equilibrium.

  4. Dynamic covalent surfactants

    NARCIS (Netherlands)

    Minkenberg, C.B.

    2012-01-01

    In this thesis the development of surfactant aggregates with fast exchange dynamics between the aggregated and non-aggregated state is described. Dynamic surfactant exchange plays an important role in natural systems, for instance in cell signaling, cell division, and uptake and release of cargo.

  5. Effect of Surfactant on Characteristics of Solid Lipid Nanoparticles

    International Nuclear Information System (INIS)

    Karn-orachai, K.; Ruktanonchai, U.; Smith, S.M.

    2011-01-01

    Solid Lipid Nanoparticles (SLN) have showed a great promise as an alternative drug carrier being used for intravenous and dermal application. SLNs formulation consists of solid lipid core with drug and surfactant. Type of surfactants can influence on the formation of SLN and their physico-chemical properties of lipid nanoparticles. This work focuses on basic properties of drug-free Compritol ATO 888 based SLN systems being form by using cationic and nonionic surfactant. Cetyl pyridinium chloride and Tween 80 were employed, respectively, as cationic and nonionic surfactants, and that the studied free-drug SLN systems are denoted as F-SLN-C and F-SLN-T accordingly. Atomic force microscopy revealed that the F-SLN-C system has spherical-like morphology, while the F-SLN-T system has disk-like one. Effects of surfactant on the physical properties of lipid nanoparticles are investigated in the absence of model drug to avoid the interaction between drug and surfactant. Fresh particles were studied within 2-3 days after preparation. Its hydrodynamic diameters were found at 178 nm and 157 nm for F-SLN-C and F-SLN-T, respectively whereas zeta potentials were in range of 70 to 80 mV and -15 to -25 mV for FSLN- C and F-SLN-T, respectively. Differential scanning calorimetry was used to quantify the crystallinity of SLN systems in terms of a recrystallization index (%RI). It was found that the % RI of F-SLN-C was slightly higher than that of F-SLN-T in which F-SLNC tends to separate itself from SLN faster than lipid in F-SLN-T. Raman spectroscopy and mapping were used to investigate the components distribution of SLN matrix. Spherical-like particle was observed with FSLN- C, while disk-like particle was found with F-SLN-T. The results demonstrate surfactant play an important role on SLN physical characteristics for example size, crystallinity and morphology. (author)

  6. Interaction of biocompatible natural rosin-based surfactants with human serum albumin: A biophysical study

    Energy Technology Data Exchange (ETDEWEB)

    Ishtikhar, Mohd [Protein Biophysics Laboratory, Interdisciplinary Biotechnology Unit, Aligarh Muslim University, Aligarh 202002 (India); Ali, Mohd Sajid [Surfactant Research Chair, Department of Chemistry, King Saud University, P.O. Box-2455, Riyadh 11451 (Saudi Arabia); Atta, Ayman M. [Surfactant Research Chair, Department of Chemistry, King Saud University, P.O. Box-2455, Riyadh 11451 (Saudi Arabia); Petroleum Application department, Egyptian Petroleum Research Institute, Ahmad Elzomor St., Nasr city, Cairo-11727 (Egypt); Al-Lohedan, H.A. [Surfactant Research Chair, Department of Chemistry, King Saud University, P.O. Box-2455, Riyadh 11451 (Saudi Arabia); Nigam, Lokesh; Subbarao, Naidu [Centre for Computational Biology and Bioinformatics, School of Computational and Integrative Sciences, Jawaharlal Nehru University, New Delhi 110067 (India); Hasan Khan, Rizwan, E-mail: rizwanhkhan@hotmail.com [Protein Biophysics Laboratory, Interdisciplinary Biotechnology Unit, Aligarh Muslim University, Aligarh 202002 (India)

    2015-11-15

    Biophysical insight into interaction of biocompatible rosin-based surfactants with human serum albumin (HSA) was studied at physiological conditions using various spectroscopic, calorimetric and molecular docking approaches. The binding constant (K{sub b}), enthalpy (ΔH{sup 0}), entropy (ΔS{sup 0}) and Gibbs free energy change (ΔG{sup 0}) were calculated by spectroscopic and calorimetric method. We have also calculated the probability of energy transfer by FRET analysis. The circular dichroism study showed that the cationic surfactant QRMAE significantly altered the secondary structure of HSA as compared to the nonionic rosin surfactants. The thermodynamic study was performed by ITC to determine binding constant as well as change in enthalpy of HSA in presence of rosin surfactants. It clearly showed that hydrogen binding and hydrophobic interaction play an important role in the binding of HSA to rosin surfactants. We have also performed molecular docking studies to locate the binding site on HSA and to visualize the mode of interaction. The present study provides a significant insight into HSA–rosin surfactants interaction, which also improves our understanding of the possible effect of rosin surfactants on human health. - Highlights: • RMPEG 750 has the highest Kb, Kq and Ksv value as compared to other rosin surfactants. • The probability of energy transfer from HSA to rosin surfactants was maximum in the case of RMPEG 750. • Cationic surfactant QRMAE significantly altered the secondary structure of the HSA as compared to other rosin surfactants. • Molecular docking and ITC experiment studies, to locate the binding site on HSA and to investigate the mode of interaction.

  7. Effect of fluorine on dairy cattle. V. Fluorine in the urine as an estimator of fluorine intake

    Energy Technology Data Exchange (ETDEWEB)

    Shupe, J.L.; Harris, L.E.; Greenwood, D.A.; Butcher, J.E.; Nielsen, H.M.

    1963-03-01

    Thirty-two Holstein-Friesian cows were fed four levels of fluorine, two levels of calcium-phosphorus mineral, and two levels of a concentrate mix from about 3 months to 7.5 years of age. Two digestion and balance trials were conducted before calving and three after the animals started to lactate. In addition, after the cows were on trial for 7 years and 52 days, urine was collected approximately every 1.5 hours and composited for each 3-hour interval over a 24-hour period. During these and previous studies, it was found that urine samples should be taken in the morning for best results and that, when possible, samples of urine should be obtained from several cows and the results pooled to give a reliable index of the fluorine consumed. The determination of the fluorine:creatinine ratio was found to have merit as a means of adjusting for differences in urine volumes. A correlation was found to exist among concentration of fluorine in the urine, amount of fluorine in dry matter consumed, and the length of time that fluorine is ingested. By determining parts per million (ppm) of fluorine in the urine and combining this with a knowledge of the length of time the animals had ingested fluorine, the ppm of fluorine in the ingested dry matter could be estimated. Taken alone, however, this measurement was an inadequate criterion for a definite diagnosis of fluorosis in cattle. 10 references, 4 figures, 3 tables.

  8. Special Feature Organo-Fluorine Chemical Science

    Directory of Open Access Journals (Sweden)

    Helmut Martin Hügel

    2012-06-01

    Full Text Available Fluorine is the 13th most abundant element and, with other fluorine containing functional groups, is a most effective element in biological substances, pharmaceuticals, agrochemicals, liquid crystals, dyes, polymers and a wide range of consumer products. This reflects its resistance to metabolic change due to the strength of the C-F bond providing biological stability and the application of its nonstick-interfacial physical characteristics. Its introduction often remains a synthetic challenge. The widespread use of organofluorines has increased the demand for the development of practical and simple reagents and experimental strategies for the incorporation of fluorine into all types of molecular structures and this was the reasoning behind this special feature on Organo-Fluorine Chemical Science.The contributed articles belong to two broad groups: (i preparation of fluorine materials, polymers; (ii the synthesis/applications of organo-fluorine molecules. [...

  9. Protolytic properties and complexation of DL-alpha-alanine and DL-alpha-valine and their dipeptides in aqueous and micellar solutions of surfactants

    NARCIS (Netherlands)

    Chernyshova, O. S.; Boychenko, Oleksandr; Abdulrahman, H.; Loginova, L. P.

    In this work we investigated the effect of the micellar media of anionic (sodium dodecylsulfate, SDS), cationic (cetylpiridinium chloride, CPC) and non-ionic (Brij-35) surfactants on the protolytic properties of amino acids DL-alpha-alanine, DL-alpha-valine and dipeptides

  10. A PIV Study of Drop-interface Coalescence with Surfactants

    Science.gov (United States)

    Weheliye, Weheliye Hashi; Dong, Teng; Angeli, Panagiota

    2017-11-01

    In this work, the coalescence of a drop with an aqueous-organic interface was studied by Particle Image Velocimetry (PIV). The effect of surfactants on the drop surface evolution, the vorticity field and the kinetic energy distribution in the drop during coalescence were investigated. The coalescence took place in an acrylic rectangular box with 79% glycerol solution at the bottom and Exxsol D80 oil above. The glycerol solution drop was generated through a nozzle fixed at 2cm above the aqueous/oil interface and was seeded with Rhodamine particles. The whole process was captured by a high-speed camera. Different mass ratios of non-ionic surfactant Span80 to oil were studied. The increase of surfactant concentration promoted deformation of the interface before the rupture of the trapped oil film. At the early stages after film rupture, two counter-rotating vortices appeared at the bottom of the drop which then travelled to the upper part. The propagation rates, as well as the intensities of the vortices decreased at high surfactant concentrations. At early stages, the kinetic energy was mainly distributed near the bottom part of the droplet, while at later stages it was distributed near the upper part of the droplet. Programme Grant MEMPHIS, Chinese Scholarship Council (CSC).

  11. Effect of surfactants on the survival and sorption of viruses.

    Science.gov (United States)

    Chattopadhyay, Devamita; Chattopadhyay, Sandip; Lyon, William G; Wilson, John T

    2002-10-01

    There is an increasing concern about the protection of groundwater from contamination by enteric viruses and the prevention of outbreaks of waterborne diseases. Knowledge of survivability and transport of viruses from their point of origin is necessary to determine their potential effects on the neighboring groundwater systems. The distribution of virus is, in turn, dependent on the physical and chemical compositions of the surrounding soil and subsurface systems. For the present study, we have determined the effects of different surfactants (cationic, anionic, nonionic, and biological) and natural organic matter (NOM) on bacteriophages. Results indicated that surfactants and NOM adversely affect phage survival in binary systems, with surfactants being the most harmful. Studies with ternary systems also showed that the presence of surfactants reduced sorption of phages on sorbents either by occupying available sorption sites on the sorbent material or by displacing the sorbed phages from the sorbent surface. Water contact angles of the selected phages and different sorbent surfaces have been measured. Experimental data demonstrated that the sorption of hydrophobic viruses was favored by hydrophobic sorbents, while the sorption of hydrophilic viruses was favored by hydrophilic sorbents.

  12. Extraction and Characterization of Surfactants from Atmospheric Aerosols.

    Science.gov (United States)

    Nozière, Barbara; Gérard, Violaine; Baduel, Christine; Ferronato, Corinne

    2017-04-21

    Surface-active compounds, or surfactants, present in atmospheric aerosols are expected to play important roles in the formation of liquid water clouds in the Earth's atmosphere, a central process in meteorology, hydrology, and for the climate system. But because specific extraction and characterization of these compounds have been lacking for decades, very little is known on their identity, properties, mode of action and origins, thus preventing the full understanding of cloud formation and its potential links with the Earth's ecosystems. In this paper we present recently developed methods for 1) the targeted extraction of all the surfactants from atmospheric aerosol samples and for the determination of 2) their absolute concentrations in the aerosol phase and 3) their static surface tension curves in water, including their Critical Micelle Concentration (CMC). These methods have been validated with 9 references surfactants, including anionic, cationic and non-ionic ones. Examples of results are presented for surfactants found in fine aerosol particles (diameter <1 μm) collected at a coastal site in Croatia and suggestions for future improvements and other characterizations than those presented are discussed.

  13. Evaluation and application of surfactants synthesized from asphalt components

    Directory of Open Access Journals (Sweden)

    E.R. Souaya

    2012-06-01

    Full Text Available The synthesis, characterization, surface activity and applications of nonionic surfactants derived from the asphalt components (maltenes M are presented. These compounds were synthesized by the sulfonation of (maltene, then the prepared maltene sulfonic acid (MS was reacted with hexadecylamine giving maltene sulfonamide product (A which undergoes an alkali-catalyzed ethoxylation at (135–150 °C. Several surfactants (M-10 to M-40 were formed with different ethylene oxide units (from 10 up to 40 and were characterized by molecular weight determinations, elemental analyses and FTIR analysis. Surface tension, as a function of concentration of the surfactants in the aqueous media, was measured at 25 °C. From these measurements, the critical micelle concentration (CMC, the maximum surface excess concentration (Гmax, Minimum area per molecule (Amin, effectiveness of surface reduction (ПCMC and the efficiency (pC20 were calculated. The prepared surfactants were applied as emulsifying agents for making asphalt emulsions. Storage stability, (Saybolt Furol viscosity, settlement (water content difference %, coating ability and water resistance were measured. The results indicated that M-20 (maltene sulfonamide ethoxylated with 20 units of ethylene oxides gives a maximum stability.

  14. Comprehensive study of tartrazine/cationic surfactant interaction.

    Science.gov (United States)

    Shahir, Afshin Asadzadeh; Javadian, Soheila; Razavizadeh, Bi Bi Marzieh; Gharibi, Hussein

    2011-12-15

    Interaction of a food dye, tartrazine, with some cationic conventional and gemini surfactants, tetradecyltrimethylammonium bromide (TTAB), N,N'-ditetradecyl-N,N,N',N'-tetramethyl-N,N'-butanediyl-diammonium dibromide (14,4,14), and N,N'-didodecyl-N,N,N',N'-tetramethyl-N,N'-butanediyl-diammonium dibromide (12,4,12), were first investigated comprehensively employing conductometry, tensiometry, and UV-visible spectroscopy. Tartrazine was found to behave in the same manner as aromatic counterions. The formation of ion pairs reflected as a considerable increase of the surfactant efficiency in tensiometry plots and their stoichiometry were determined by Job's method of continuous variations. For the tartrazine/TTAB system, nonionic DS(3), ionic DS(2-), and/or DS(2)(-) ion pairs, their small premicelles, and tartrazine-rich micelles were constituted as well as dye-containing TTAB-rich micelles. Insoluble J-aggregates of DS(-) ion pairs and cylindrical surfactant-rich micelles were also formed in tartrazine/gemini surfactant systems and recognized by transmission electron microscopy. The zeta potential and the size of the aggregates were determined using dynamic light scattering and confirmed the suggested models for the processes happening in each system. Cyclic voltammetry was applied successfully to track all of these species using tartrazine's own reduction peak current for the first time.

  15. Pulmonary surfactant and lung transplantation

    NARCIS (Netherlands)

    Erasmus, Michiel Elardus

    1997-01-01

    Pulmonary surfactant lowers the surface tension at the air-water interface inside the alveolus. This is achieved by adsorption of surfactant phospholipids at the air-water interface, a process controlled by surfactant-associated proteins, such as SP-A. In this way, surfactant prevents collapse of

  16. Atrazine and Diuron partitioning within a soil-water-surfactant system

    Science.gov (United States)

    Wang, P.; Keller, A.

    2006-12-01

    The interaction between pesticide and soil and water is even more complex in the presence of surfactants. In this study, batch equilibrium was employed to study the sorption of surfactants and the partitioning behaviors of Atrazine and Diuron within a soil-water-surfactant system. Five soils and four surfactants (nonionic Triton- 100, cationic Benzalkonium Chloride (BC), anionic Linear Alkylbenzenesulfonate (LAS), and anionic Sodium Dodecyl Sulfate (SDS)) were used. All surfactant sorption isotherms exhibited an initial linear increase at low surfactant concentrations but reached an asymptotic value as the surfactant concentrations increased. Among the surfactants, BC had the highest sorption onto all soils, followed by Triton-100 and then by LAS and SDS, implying that the nature of the charge significantly influences surfactant sorption. Sorption of either Triton-100 or BC was highly correlated with soil Cation Exchange Capacity (CEC) while that of LAS and SDS was complicated by the presence of Ca2+ and Mg2+ in the aqueous phase and the CEC sites. Both LAS and SDS formed complexes with Ca2+ and Mg2+, resulting in a significant decrease in the detergency of the surfactants. At high surfactant concentrations and with micelles present in the aqueous phase, the micelles formed a more competitive partitioning site for the pesticides, resulting in less pesticide sorbed to the soil. At low Triton-100 and BC concentration, the sorption of the surfactants first resulted in less Atrazine sorption but more Diuron sorption, implying competition between the surfactants and Atrazine, which serves as an indirect evidence that there is a different sorption mechanism for Atrazine. Atrazine is a weak base and it protonates and becomes positively charged near particle surfaces where the pH is much lower than in the bulk solution. The protonated Atrazine may then be held on the CEC sites via electrostatic attraction. Triton-100, LAS and SDS sorbed on the soil showed similar

  17. Surfactants in the environment.

    Science.gov (United States)

    Ivanković, Tomislav; Hrenović, Jasna

    2010-03-01

    Surfactants are a diverse group of chemicals that are best known for their wide use in detergents and other cleaning products. After use, residual surfactants are discharged into sewage systems or directly into surface waters, and most of them end up dispersed in different environmental compartments such as soil, water or sediment. The toxic effects of surfactants on various aquatic organisms are well known. In general, surfactants are present in the environment at levels below toxicity and in Croatia below the national limit. Most surfactants are readily biodegradable and their amount is greatly reduced with secondary treatment in wastewater treatment plants. The highest concern is the release of untreated wastewater or wastewater that has undergone primary treatment alone. The discharge of wastewater polluted with massive quantities of surfactants could have serious effects on the ecosystem. Future studies of surfactant toxicities and biodegradation are necessary to withdraw highly toxic and non-biodegradable compounds from commercial use and replace them with more environmentally friendly ones.

  18. Stabilizing two IgG1 monoclonal antibodies by surfactants: Balance between aggregation prevention and structure perturbation.

    Science.gov (United States)

    Wang, Shujing; Wu, Guoliang; Zhang, Xinyi; Tian, Zhou; Zhang, Ning; Hu, Tao; Dai, Weiguo; Qian, Feng

    2017-05-01

    Surfactants are widely used as stabilizers in the biopharmaceutical formulations to minimize protein aggregation. Under a fixed stress condition, the protecting and destabilizing effects of surfactants are hypothesized to be highly dependent on the species and concentrations of surfactants and mAb. Therefore, we here studied the aggregation-prevention and structure-perturbation effects of eight commonly used surfactants (Tw20, Tw80, Brij35, Chaps, TrX-100, SDS, Pluronic F68 and F127) on two IgG1 solution formulations under agitation, using analytical methodologies including visual inspection, OD 350 measurement, HPLC-SEC, circular dicroism, fluorescence spectroscopy and differential scanning calorimetry. We found that: (1) With concentrations range from 0.02 to 2mg/mL, nonionic surfactants were found to offer efficient aggregation-prevention effect, which is superior than the ionic surfactants; and higher surfactant concentration prevented mAb aggregation better especially under prolonged stability test under stress conditions. (2) The surfactant induced structure-perturbation emerged when even higher surfactant concentration (≥2mg/mL) was used, and such effect was surfactant-property dependent; and (3) the two IgG1 demonstrated different aggregation mechanisms and surfactant dependency, especially at high mAb concentrations. In conclusion, surfactants usage in mAb formulations, including the types and concentrations, should strike an optimal balance between the desirable aggregation-prevention and the detrimental structure-perturbation effects, while the consideration of mAb aggregation mechanism and concentration is also required for surfactant assessment. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. The application of a mulch biofilm barrier for surfactant enhanced polycyclic aromatic hydrocarbon bioremediation

    International Nuclear Information System (INIS)

    Seo, Youngwoo; Lee, Woo-Hyung; Sorial, George; Bishop, Paul L.

    2009-01-01

    Lab scale mulch biofilm barriers were constructed and tested to evaluate their performance for preventing the migration of aqueous and surfactant solubilized PAHs. The spatial distribution of viable PAH degrader populations and resultant biofilm formation were also monitored to evaluate the performance of the biobarrier and the prolonged surfactant effect on the PAH degrading microorganism consortia in the biobarrier. Sorption and biodegradation of PAHs resulted in stable operation of the system for dissolved phenanthrene and pyrene during 150 days of experimentation. The nonionic surfactant could increase the solubility of phenanthrene and pyrene significantly. However, the biobarrier itself couldn't totally prevent the migration of micellar solubilized phenanthrene and pyrene. The presence of surfactant and the resultant highly increased phenanthrene or pyrene concentration didn't appear to cause toxic effects on the attached biofilm in the biobarrier. However, the presence of surfactant did change the structural composition of the biofilm. - Mulch biofilm barrier showed potential for surfactant enhanced bioremediation, and the presence of surfactant changed the structural composition of the biofilm

  20. Effect of Four Commonly Used Dissolution Media Surfactants on Pancreatin Proteolytic Activity.

    Science.gov (United States)

    Guncheva, Maya; Stippler, Erika

    2017-05-01

    Proteolytic enzymes are often used in dissolution testing of cross-linked gelatin capsules that do not conform to the dissolution specification. Their catalytic activity, however, can be affected when they are added to a dissolution media containing solubility enhancers, such as surfactants. The aim of this study was to assess the activity of pancreatic proteases in presence of four commonly used surfactants. We found that pancreatin exhibits remarkable proteolytic activity in the presence of Tween 80, even at the concentrations as high as 250 times its critical micelle concentration (cmc) in water, whereas, Triton X-100 enhanced the proteolytic activity of pancreatin when added at concentrations above its cmc in water. Both surfactants are non-ionic surfactants. On the other hand, sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB), which are ionic surfactants, have a detrimental effect on the proteolytic activity of pancreatin. For example, a 50% reduction of the pancreatin activity was found in samples which contain a minor amount of SDS (0.05% w/v) in comparison to a surfactant-free reaction. Additionally, no activity was observed for the pancreatin-SDS samples which were incubated for 30 min at 40°C prior to testing. CTAB had an impact on pancreatin activity at concentrations higher than its cmc. Data from this manuscript can be used as a benchmark for optimization of the dissolution procedures that require use of both surfactants and enzymes.

  1. Metathesis depolymerizable surfactants

    Science.gov (United States)

    Jamison, Gregory M [Albuquerque, NM; Wheeler, David R [Albuquerque, NM; Loy, Douglas A [Tucson, AZ; Simmons, Blake A [San Francisco, CA; Long, Timothy M [Evanston, IL; McElhanon, James R [Manteca, CA; Rahimian, Kamyar [Albuquerque, NM; Staiger, Chad L [Albuquerque, NM

    2008-04-15

    A class of surfactant molecules whose structure includes regularly spaced unsaturation in the tail group and thus, can be readily decomposed by ring-closing metathesis, and particularly by the action of a transition metal catalyst, to form small molecule products. These small molecules are designed to have increased volatility and/or enhanced solubility as compared to the original surfactant molecule and are thus easily removed by solvent extraction or vacuum extraction at low temperature. By producing easily removable decomposition products, the surfactant molecules become particularly desirable as template structures for preparing meso- and microstructural materials with tailored properties.

  2. Genetic effects of nonionizing electromagnetic fields

    International Nuclear Information System (INIS)

    Lai, Henry

    2001-01-01

    Due to the increased use of electricity and wireless communication devices, there is a concern on whether exposure to nonionizing electromagnetic fields (50/60 Hz fields and radiofrequency radiation) can lead to harmful health effects, particularly, genetic effects and cancer development. This presentation will review recent research on genetic effects of power line frequency and radiofrequency electromagnetic fields. Even though the mechanism of interaction is still unknown, there is increasing evidence that these electromagnetic fields at low intensities can cause genetic damage in cells. There is also evidence suggesting that the effects are caused by oxidative stress. (author)

  3. Medical uses non-ionizing radiation

    International Nuclear Information System (INIS)

    Ubeda Maeso, A.; Trillo Ruiz, M. A.

    2016-01-01

    This article reviews various clinical applications of non-ionizing radiation, focusing on the Hz-GHz frequency range. Depending on the signal characteristics, the applications cover several therapeutic areas, including osteology and traumatology, tissue regeneration, physiotherapy, chronic pain treatment, neurology, cardiology, urology and oncology. Electromagnetic therapies have proved simple, safe, low cost, devoid of side effects and able to treat the underlying pathology rather than simply alleviate the symptoms. Therefore, it is predictable that these therapies will have as serious impact on public health and associated costs. (Author)

  4. [Fluorinated analogs of nucleosides and fluorinated tracers of gene expression for positron emission tomography].

    Science.gov (United States)

    Couturier, Olivier; Chatal, Jean-François; Hustinx, Roland

    2004-09-01

    18F-FDG is currently the only fluorinated tracer used in routine clinical positron emission tomography (PET). Fluorine 18 is considered as the ideal radioisotope for PET, thanks to a low positron energy, which not only limits the dose rate to the patients but also provides high-resolution images. Furthermore, the 110 min. physical half-life allows for high-yield radiosynthesis, transport from the production site to the imaging site, and imaging protocols that could span hours, which permits dynamic studies and assessing metabolic processes that may be fairly slow. Recently, synthesis of fluorinated tracers from prosthetic group precursors, which allows easier radiolabeling of biomolecules, has given a boost to the development of numerous fluorinated tracers. Given the wide availability of fluorine 18, such tracers may well develop into important routine tracers. This article is a review of the literature concerning fluorinated analogs of nucleosides and fluorinated radiotracers of gene expression recently developed and under investigation.

  5. Fluorine-Hydrazine Propulsion Technology update

    Science.gov (United States)

    Bond, D. L.; Appel, M. A.; Kruger, G. W.

    1980-01-01

    The current status of the fluorine hydrazine propulsion system development is discussed. Progress on the components, rocket engine, and system design is presented. A detailed look at a fluorine hydrazine system as a potential propulsion option for the Galileo Project (Jupiter orbiter) is delineated and the results of safety and technical reviews which were accomplished to verify the feasibility of this option are summarized.

  6. Do defects enhance fluorination of graphene?

    Czech Academy of Sciences Publication Activity Database

    da Costa, Sara; Ek Weis, Johan; Frank, Otakar; Fridrichová, Michaela; Bastl, Zdeněk; Kalbáč, Martin

    2016-01-01

    Roč. 6, AUG 2016 (2016), s. 81471-81476 ISSN 2046-2069 R&D Projects: GA MŠk LL1301 Institutional support: RVO:61388955 Keywords : fluorination * graphene * fluorine Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.108, year: 2016

  7. Synthesis of nanocrystalline fluorinated hydroxyapatite by ...

    Indian Academy of Sciences (India)

    or by soft drinks). Apart from enhancing the acid resistance of the hydroxyapatite, fluorine is thought to stimulate bone growth directly by suppressing the maturation of osteoclasts, inhibiting phagocyte cell activity and mini- mizing proliferation of fibroblasts (Pullen and Gross. 2005). The fluorine content in the natural bone is ...

  8. Fluorine effect on pericyclic and pseudopericyclic processes ...

    Indian Academy of Sciences (India)

    Administrator

    studied the thermolysis of 2-pyrone and 6-halo-2- pyrone and have found that fluorine substitution substantially altered the potential energy surface for. ERO, sigmatropic rearrangement and electrocyclic ring closing (ERC) of pyrones. Fluorine is known to strongly perturb reaction barriers and mechanisms. 31,32. This has ...

  9. Review of health effects of non-ionizing radiations | Ughachukwu ...

    African Journals Online (AJOL)

    Non-ionizing radiations (electromagnetic waves) consist of electric and magnetic waves travelling together. In decreasing order of wavelengths, they are classified into ultra long electromagnetic waves, radio waves, micro waves, infrared waves and visible rays. Man-made sources of non-ionizing radiation include electrical, ...

  10. In vitro surfactant structure-toxicity relationships: implications for surfactant use in sexually transmitted infection prophylaxis and contraception.

    Directory of Open Access Journals (Sweden)

    Ângela S Inácio

    Full Text Available BACKGROUND: The need for woman-controlled, cheap, safe, effective, easy-to-use and easy-to-store topical applications for prophylaxis against sexually transmitted infections (STIs makes surfactant-containing formulations an interesting option that requires a more fundamental knowledge concerning surfactant toxicology and structure-activity relationships. METHODOLOGY/PRINCIPAL FINDINGS: We report in vitro effects of surfactant concentration, exposure time and structure on the viability of mammalian cell types typically encountered in the vagina, namely, fully polarized and confluent epithelial cells, confluent but non-polarized epithelial-like cells, dendritic cells, and human sperm. Representatives of the different families of commercially available surfactants--nonionic (Triton X-100 and monolaurin, zwitterionic (DDPS, anionic (SDS, and cationic (C(nTAB (n = 10 to 16, C(12PB, and C(12BZK--were examined. Triton X-100, monolaurin, DDPS and SDS were toxic to all cell types at concentrations around their critical micelle concentration (CMC suggesting a non-selective mode of action involving cell membrane destabilization and/or destruction. All cationic surfactants were toxic at concentrations far below their CMC and showed significant differences in their toxicity toward polarized as compared with non-polarized cells. Their toxicity was also dependent on the chemical nature of the polar head group. Our results suggest an intracellular locus of action for cationic surfactants and show that their structure-activity relationships could be profitably exploited for STI prophylaxis in vaginal gel formulations. The therapeutic indices comparing polarized epithelial cell toxicity to sperm toxicity for all surfactants examined, except C(12PB and C(12BZK, does not justify their use as contraceptive agents. C(12PB and C(12BZK are shown to have a narrow therapeutic index recommending caution in their use in contraceptive formulations. CONCLUSIONS

  11. In vitro surfactant structure-toxicity relationships: implications for surfactant use in sexually transmitted infection prophylaxis and contraception.

    Science.gov (United States)

    Inácio, Ângela S; Mesquita, Katia A; Baptista, Marta; Ramalho-Santos, João; Vaz, Winchil L C; Vieira, Otília V

    2011-01-01

    The need for woman-controlled, cheap, safe, effective, easy-to-use and easy-to-store topical applications for prophylaxis against sexually transmitted infections (STIs) makes surfactant-containing formulations an interesting option that requires a more fundamental knowledge concerning surfactant toxicology and structure-activity relationships. We report in vitro effects of surfactant concentration, exposure time and structure on the viability of mammalian cell types typically encountered in the vagina, namely, fully polarized and confluent epithelial cells, confluent but non-polarized epithelial-like cells, dendritic cells, and human sperm. Representatives of the different families of commercially available surfactants--nonionic (Triton X-100 and monolaurin), zwitterionic (DDPS), anionic (SDS), and cationic (C(n)TAB (n = 10 to 16), C(12)PB, and C(12)BZK)--were examined. Triton X-100, monolaurin, DDPS and SDS were toxic to all cell types at concentrations around their critical micelle concentration (CMC) suggesting a non-selective mode of action involving cell membrane destabilization and/or destruction. All cationic surfactants were toxic at concentrations far below their CMC and showed significant differences in their toxicity toward polarized as compared with non-polarized cells. Their toxicity was also dependent on the chemical nature of the polar head group. Our results suggest an intracellular locus of action for cationic surfactants and show that their structure-activity relationships could be profitably exploited for STI prophylaxis in vaginal gel formulations. The therapeutic indices comparing polarized epithelial cell toxicity to sperm toxicity for all surfactants examined, except C(12)PB and C(12)BZK, does not justify their use as contraceptive agents. C(12)PB and C(12)BZK are shown to have a narrow therapeutic index recommending caution in their use in contraceptive formulations. Our results contribute to understanding the mechanisms involved in

  12. Applications of Fluorine in Medicinal Chemistry.

    Science.gov (United States)

    Gillis, Eric P; Eastman, Kyle J; Hill, Matthew D; Donnelly, David J; Meanwell, Nicholas A

    2015-11-12

    The role of fluorine in drug design and development is expanding rapidly as we learn more about the unique properties associated with this unusual element and how to deploy it with greater sophistication. The judicious introduction of fluorine into a molecule can productively influence conformation, pKa, intrinsic potency, membrane permeability, metabolic pathways, and pharmacokinetic properties. In addition, (18)F has been established as a useful positron emitting isotope for use with in vivo imaging technology that potentially has extensive application in drug discovery and development, often limited only by convenient synthetic accessibility to labeled compounds. The wide ranging applications of fluorine in drug design are providing a strong stimulus for the development of new synthetic methodologies that allow more facile access to a wide range of fluorinated compounds. In this review, we provide an update on the effects of the strategic incorporation of fluorine in drug molecules and applications in positron emission tomography.

  13. Adsorption of N-decanoyl-N-methylglucamine at the Interface Electrode−NaClO4 Solution. Comparison of Adsorption Properties of Different Surfactants

    Directory of Open Access Journals (Sweden)

    Dorota Gugała-Fekner

    2016-06-01

    Full Text Available The electrosorption behaviour of non-ionic surfactant: N-decanoyl-N-methylglucamine on mercury electrode in 1 mol dm−3 NaClO4 solution was determined. The values of the relative surface excess were determined on the basis of double layer differential capacity. A set of parameters of maximal adsorption and the constants of Frumkin, modified Flory-Huggins and virial adsorption isotherms were obtained. It was stated that the adsorption of this surfactant is determined by the adsorption energy, however here is no simple relation between a surface excess and the values of repulsive interactions parameter A. Adsorption properties of three surfactants: cationic, anionic and non-ionic were compared. This work is licensed under a Creative Commons Attribution 4.0 International License.

  14. Determination of anionic surfactants during wastewater recycling process by ion pair chromatography with suppressed conductivity detection

    Science.gov (United States)

    Levine, L. H.; Judkins, J. E.; Garland, J. L.; Sager, J. C. (Principal Investigator)

    2000-01-01

    A direct approach utilizing ion pairing reversed-phase chromatography coupled with suppressed conductivity detection was developed to monitor biodegradation of anionic surfactants during wastewater recycling through hydroponic plant growth systems and fixed-film bioreactors. Samples of hydroponic nutrient solution and bioreactor effluent with high concentrations (up to 120 mS electrical conductance) of inorganic ions can be analyzed without pretreatment or interference. The presence of non-ionic surfactants did not significantly affect the analysis. Dynamic linear ranges for tested surfactants [Igepon TC-42, ammonium lauryl sulfate, sodium laureth sulfate and sodium alkyl (C10-C16) ether sulfate] were 2 to approximately 500, 1 to approximately 500, 2.5 to approximately 550 and 3.0 to approximately 630 microg/ml, respectively.

  15. Correlation and prediction of environmental properties of alcohol ethoxylate surfactants using the UNIFAC method

    DEFF Research Database (Denmark)

    Cheng, Hongyuan; Kontogeorgis, Georgios; Stenby, Erling Halfdan

    2005-01-01

    Environmental properties of one type of nonionic surfactants, the alcohol ethoxylates (polyoxyethylene alcohols), are predicted using the UNIFAC (universal quasi-chemical functional group activity coefficient) method. Various properties are considered; the octanol-water partition coefficient (Kow......), the bioconcentration factor (BCF), and the toxicity. Kow values of alcohol ethoxylates are difficult to measure. Existing methods such as those in commercial software like ACD,ClogP and KowWin have not been applied to surfactants, and they fail for heavy alcohol ethoxylates (alkyl carbon numbers above 12). Thus......, the Kow values are predicted here via UNIFAC and compared to the few available experimental data. Based on the predicted Kow values, a correlation between Kow and hydrophilic-lipophilic balance (HLB) is establi2shed because HLB is a widely used parameter in surfactant applications. Finally, BCF...

  16. Physico-chemical study of new functionalized surfactants having thermo sensitive de-mixing behaviour: use in extraction of uranyl nitrate

    International Nuclear Information System (INIS)

    Prevost, S.

    2006-04-01

    New thermo-sensitive functionalized surfactants with metal-chelating properties have been developed and their physical-chemistry studied. They associate a polyethoxylated nonionic surfactant (CiEj) block and a amino-acid residue as a chelating group. Functionalization preserves both properties of the thermo-sensitive surfactant moiety and the chelating group, a diamide closed to uranyl ionophore.The complexing group participates to the polar head group of the surfactant, increasing the area per molecule. As a result, functionalized surfactants form spherical micelles when diluted in water, and the concentrated part of their phase diagrams exhibits structures having higher curvatures than the nonionic precursor CiEj. The structure of the uranyl - diamide complex has been elucidated by NMR and ESI-MS and is of the type UO 2 (NO 3 ) 2 .L; the associated complexation constant, which is very low, has been evaluated by 1 H NMR.A nitrate salt, LiNO 3 , is added at high concentration to improve complexation. The effect of this salt has been analyzed, and was found to be rather similar to the effect on classical CiEj. When uranyl nitrate complexation occurs, the cloud point decreases dramatically, together with the reduction of the area per head group at micelle/solution interface. This effect can be minimized by using a nonionic precursor having a larger polar head group. The functionalized surfactants have been tested in the cloud point extraction of uranyl nitrate, and have proved their efficiency. Those results demonstrate the viability of the functionalized surfactants design, with a covalent link between a thermo-sensitive surfactant block and a chelating group. (author)

  17. Aliphatic Nucleophilic Radio-fluorination

    International Nuclear Information System (INIS)

    Roeda, D.; Dolle, F.

    2010-01-01

    In this review we are looking at some aspects of nucleophilic aliphatic radio-fluorination, notably the labelled fluoride source, design aspects, the leaving group and the solvent. It should be clear that there is more to this branch of radiolabelling than one would suspect from the frequently used standard tosylate replacement with kryptofix/[ 18 F]fluoride in acetonitrile or DMSO. Competitive elimination can be a serious problem that can affect both yield and purification. De-protection of sensitive groups after radiolabelling and its possible side reactions can complicate purification. The right choice of leaving group and protecting groups may be crucial. Newer developments such as the use of tertiary alcohols or ionic liquids as solvents, long-chain poly-fluorinated sulphonate leaving groups facilitating fluorous solid phase extraction, or immobilisation of the precursor on a solid phase support may help to solve these problems, for example the longstanding problems with [ 18 F]FLT, whereas older concepts such as certain cyclic reactive entities for ring opening or even an abandoned reagent as [ 18 F]DAST should not be forgotten. (authors)

  18. Surfactant exfoliated 2D hexagonal Boron Nitride (2D-hBN) explored as a potential electrochemical sensor for dopamine: surfactants significantly influence sensor capabilities.

    Science.gov (United States)

    Khan, Aamar F; Brownson, Dale A C; Foster, Christopher W; Smith, Graham C; Banks, Craig E

    2017-05-21

    Surfactant exfoliated 2D hexagonal Boron Nitride (2D-hBN) nanosheets are explored as a potential electrochemical sensing platform and evaluated towards the electroanalytical sensing of dopamine (DA) in the presence of the common interferents, ascorbic acid (AA) and uric acid (UA). Surfactant exfoliated 2D-hBN nanosheets (2-4 layers) fabricated using sodium cholate in aqueous media are electrically wired via a drop-casting modification process onto disposable screen-printed graphite electrodes (SPEs). We critically evaluate the performance of these 2D-hBN modified SPEs and demonstrate the effect of 'mass coverage' towards the detection of DA, AA and UA. Previous studies utilising surfactant-free (pristine) 2D-hBN modified SPEs have shown a beneficial effect towards the detection of DA, AA and UA when compared to the underlying/unmodified graphite-based electrode. We show that the fabrication route utilised to prepare 2D-hBN is a vital experimental consideration, such that the beneficial effect previously reported is considerably reduced when surfactant exfoliated 2D-hBN is utilised. We demonstrate for the first time, through implementation of control experiments in the form of surfactant modified graphite electrodes, that sodium cholate is a major contributing factor to the aforementioned detrimental behaviour. The significance here is not in the material per se, but the fundamental knowledge of the surfactant and surface coverage changing the electrochemical properties of the material under investigation. Given the wide variety of ionic and non-ionic surfactants that are utilised in the manufacture of novel 2D materials, the control experiments reported herein need to be performed in order to de-convolute the electrochemical response and effectively evaluate the 'underlying surface/surfactant/2D materials' electrocatalytic contribution.

  19. Effect of different surfactants in biorelevant medium on the secretion of a lipophilic compound in lipoproteins using Caco-2 cell culture

    DEFF Research Database (Denmark)

    Karpf, Ditte M; Holm, René; Garafalo, Carole

    2006-01-01

    The impact of a pharmaceutical relevant metabolizable, ionic surfactant or two synthetic, nonionic surfactants on the absorption and lipoprotein incorporation of a lipophilic drug, retinol, was studied in the Caco-2 cell culture. Filter-grown monolayers of Caco-2 cells were incubated for 20 h...... was ultracentrifugated into different lipoprotein classes and their (3)H-retinol and (14)C-lipid concentrations were determined. The cells incubated with lyso-PC and Tween 80 increased the incorporation of (3)H-retinol and (14)C-lipid into chylomicrons and very low density lipoproteins (VLDL). The explored surfactants...... impacted the incorporation of (3)H-retinol and (14)C-lipid in chylomicrons and VLDL in a concentration-dependent manner. As these surfactants interfere with the intestinal lipoprotein secretion, inclusion of high concentrations of the surfactants in lipid-based formulations of poorly aqueous soluble drugs...

  20. Surfactant adsorption study in sandstone for enhanced oil recovery; Estudo da adsorcao de tensoativos em arenitos para recuperacao avancada de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Curbelo, Fabiola D.S.; Santanna, Vanessa C.; Barros Neto, Eduardo L. de; Dutra Junior, Tarcilio V.; Dantas Neto, Afonso A. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Dept. de Engenharia Quimica; Garnica, Alfredo I.C. [Universidade Federal da Paraiba (UFPB), Joao Pessoa, PB (Brazil). Dept. de Tecnologia Quimica e de Alimentos; Lucena Neto, Marciano [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil); Dantas, Tereza N.C. [Faculdade Natalense para o Desenvolvimento do RN (FARN), Natal, RN (Brazil)

    2004-07-01

    Adsorption of surfactants from aqueous solutions in porous media is very important in Enhanced Oil Recovery (EOR) of oil reservoirs because surfactant loss due to adsorption on the reservoir rocks weakens the effectiveness of the injected chemical slug in reducing oil-water tension (IFT) and makes the process uneconomical. In this paper, two nonionic surfactants, such as alkyl phenol polyoxyethylene, with different ethoxylation degrees were studied, ENP95 and ENP150. The results of flow experiments of surfactant solutions in porous media showed that adsorption was higher for ENP95 because it has smaller ethoxylation degree than ENP150. This occurs what with increasing length of the head group, the molecules become more hydrophilic and, in associated structures, the steric hindrance between the head groups increases. Generally speaking, adsorption appears to be a cooperative process involving lateral interaction between surfactant and weak interaction with the solid surface. (author)

  1. Sequential application of chelating agents and innovative surfactants for the enhanced electroremediation of real sediments from toxic metals and PAHs.

    Science.gov (United States)

    Hahladakis, John N; Lekkas, Nikolaos; Smponias, Andreas; Gidarakos, Evangelos

    2014-06-01

    This study focused on the sequential application of a chelating agent (citric acid) followed by a surfactant in the simultaneous electroremediation of real contaminated sediments from toxic metals and Polycyclic Aromatic Hydrocarbons (PAHs). Furthermore, the efficiency evaluation of two innovative non-ionic surfactants, commercially known as Poloxamer 407 and Nonidet P40, was investigated. The results indicated a removal efficacy of approximately 43% and 48% for the summation of PAHs (SUM PAHs), respectively for the aforementioned surfactants, much better than the one obtained by the use of Tween 80 (nearly 21%). Individual PAHs (e.g. fluorene) were removed in percentages that reached almost 84% and 92% in the respective electrokinetic experiments when these new surfactants were introduced. In addition, the combined-enhanced sequential electrokinetic treatment with citric acid improved dramatically the removal of Zn and As, compared to the unenhanced run, but did not favor the other toxic metals examined. Since no improvement in metal removal percentages occurred when Tween 80 was used, significant contribution to this matter should also be attributed to the solubilization capacity of these innovative, in electrokinetic remediation, non-ionic surfactants. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Micro-scale displacement of NAPL by surfactant and microemulsion in heterogeneous porous media

    Science.gov (United States)

    Javanbakht, Gina; Arshadi, Maziar; Qin, Tianzhu; Goual, Lamia

    2017-07-01

    Industrial processes such as remediation of oil-contaminated aquifers and enhanced oil recovery (EOR) often utilize chemical additives to increase the removal of non-aqueous phase liquids (NAPLs) from subsurface formations. Although the majority of crude oils are classified as LNAPLs, they often contain heavy molecules (DNAPLs) such as asphaltenes that tend to adsorb on minerals and alter their wettability. Effective additives are therefore those that can reduce the threshold capillary pressure, thus mobilizing LNAPL inside pore spaces and solubilizing DNAPL from rock surfaces. Nonionic surfactants in brine have often been injected to oil or contaminated aquifer formations in order to enhance NAPL displacement through IFT reduction. Recent studies revealed that surfactant-based microemulsions have a higher tendency to alter the wettability of surfaces, compared to surfactants alone, leading to more effective NAPL removal. However, the impact of these additives on pore-scale displacement mechanisms and multi-phase fluid occupancy in porous media is, to date, still unclear. In this study, x-ray microtomography experiments were performed to investigate the impact of surfactants and microemulsions on the mobilization and solubilization of NAPL in heterogeneous rocks. Saturation profiles indicated that an incremental NAPL removal was attained by addition of microemulsion to brine, compared with surfactant. Residual cluster size distributions revealed that microemulsions could break up large clusters into smaller disconnected ones, improving their mobilization in the rock. In-situ contact angle measurements showed that microemulsions could reverse the wettability of rough contaminated surfaces to a higher extent than surfactants. Unlike surfactant alone, the surfactant-solvent blend in the carrier fluid of microemulsions was able to penetrate rough grain surfaces, particularly those of dolomite cement, and desorb asphaltenes in the form of small-emulsified NAPL droplets

  3. Response of graywater recycling systems based on hydroponic plant growth to three classes of surfactants

    Science.gov (United States)

    Garland, J. L.; Levine, L. H.; Yorio, N. C.; Hummerick, M. E.

    2004-01-01

    Anionic (sodium laureth sulfate, SLES), amphoteric (cocamidopropyl betaine, CAPB) and nonionic (alcohol polyethoxylate, AE) surfactants were added to separate nutrient film technique (NFT) hydroponic systems containing dwarf wheat (Triticum aestivum cv. USU Apogee) in a series of 21 day trials. Surfactant was added either in a (1). temporally dynamic mode (1-3 g surfactant m(-2) growing area d(-1)) as effected by automatic addition of a 300 ppm surfactant solution to meet plant water demand, or (2). continuous mode (2 g surfactant m(-2) growing area d(-1)) as effected by slow addition (10 mLh(-1)) of a 2000 ppm surfactant solution beginning at 4d after planting. SLES showed rapid primary degradation in both experiments, with no accumulation 24 h after initial addition. CAPB and AE were degraded less rapidly, with 30-50% remaining 24 h after initial addition, but CAPB and AE levels were below detection limit for the remainder of the study. No reductions in vegetative growth of wheat were observed in response to SLES, but biomass was reduced 20-25% with CAPB and AE. Microbial communities associated with both the plant roots and wetted hardware surfaces actively degraded the surfactants, as determined by monitoring surfactant levels following pulse additions at day 20 (with plants) and day 21 (after plant removal). In order to test whether the biofilm communities could ameliorate phytotoxicity by providing a microbial community acclimated for CAPB and AE decay, the continuous exposure systems were planted with wheat seeds after crop removal at day 21. Acclimation resulted in faster primary degradation (>90% within 24h) and reduced phytotoxicity. Overall, the studies indicate that relatively small areas (3-5m(2)) of hydroponic plant systems can process per capita production of mixed surfactants (5-10 g x person(-1)d(-1)) with minimal effects on plant growth.

  4. Surfactant-induced mobilisation of trace metals from estuarine sediment: Implications for contaminant bioaccessibility and remediation

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Anu [School of Earth, Ocean and Environmental Sciences, University of Plymouth, Drake Circus, Plymouth PL4 8AA (United Kingdom); Turner, Andrew [School of Earth, Ocean and Environmental Sciences, University of Plymouth, Drake Circus, Plymouth PL4 8AA (United Kingdom)], E-mail: aturner@plymouth.ac.uk

    2009-02-15

    The mobilisation of metals (Al, Fe, Cd, Cu, Mn, Ni, Pb, Sn, Zn) from contaminated estuarine sediment has been examined using commercially available surfactants. Metal release by the anionic surfactant, sodium dodecyl sulphate (SDS), increased with increasing amphiphile concentration up to and above its critical micelle concentration (CMC). Metal mobilisation by the bile acid salt, sodium taurocholate, and the nonionic surfactant, Triton X-100, however, did not vary with amphiphile concentration. SDS was the most efficient surfactant in mobilising metals from the sample, and Cd, Cu and Ni were released to the greatest extents (12-18% of total metal at [SDS] > CMC). Metal mobilisation appeared to proceed via complexation with anionic amphiphiles and denudation of hydrophobic host phases. Surfactants may play an important role in the solubilisation of metals in the digestive environment of deposit-feeding animals and, potentially, in the remediation of metal-contaminated soil and sediment. - Significant quantities of metals are mobilised from estuarine sediment by commercially available surfactants.

  5. Effects of surfactant contamination on oxygen mass transfer in fine bubble aeration process

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Xulu; Liu, Guo-hua; Fan, Haitao; Li, Meidi; Luo, Tao; Qi, Lu; Wang, Hongchen [Renmin University of China, Beijing (China)

    2013-09-15

    The effects of anionic, cationic, and non-ionic surfactants (SDS, SDBS, CTAB and Tween20) on oxygen mass transfer (OMT) in fine bubble aeration systems were investigated. The overall gas-liquid volumetric mass transfer coefficient (K{sub L}a), specific interfacial area (a), and liquid-side mass transfer coefficient (K{sub L}) parameters were used to assess the influence of the surfactants. At the same concentration, the different surfactants were observed to influence the K{sub L}a value as follows: K{sub L}a (SDBS)>K{sub L}a (SDS)>K{sub L}a (tween20)>K{sub L}a (CTAB). For all used surfactants, the overall trends showed a significant decrease in the K{sub L}a value at low concentrations (0-5mg/L), while the K{sub L}a value recovered somewhat at high concentrations (10-20mg/L). The decrease to the K{sub L} value was found to be much larger than increase in the a value in the presence of surfactants. Furthermore, a simple model was established that provides an OMT prediction for different surfactants.

  6. Exploring the Effects of Different Types of Surfactants on Zebrafish Embryos and Larvae

    Science.gov (United States)

    Wang, Yanan; Zhang, Yuan; Li, Xu; Sun, Mingzhu; Wei, Zhuo; Wang, Yu; Gao, Aiai; Chen, Dongyan; Zhao, Xin; Feng, Xizeng

    2015-01-01

    Currently, surfactants are widely distributed in the environment. As organic pollutants, their toxicities have drawn extensive attention. In this study, the effects of anionic [sodium dodecyl sulphate (SDS) ], cationic [dodecyl dimethyl benzyl ammonium chloride (1227)] and non-ionic [fatty alcohol polyoxyethylene ether (AEO) ] surfactants on zebrafish larval behaviour were evaluated. Five behavioural parameters were recorded using a larval rest/wake assay, including rest total, number of rest bouts, rest bouts length, total activity and waking activity. The results revealed that 1227 and AEO at 1 μg/mL were toxic to larval locomotor activity and that SDS had no significant effects. Moreover, we tested the toxicities of the three surfactants in developing zebrafish embryos. AEO exposure resulted in smaller head size, smaller eye size and shorter body length relative to SDS and 1227. All three surfactants incurred concentration-dependent responses. Furthermore, in situ hybridisation indicated that smaller head size may be associated with a decreased expression of krox20. The altered expression of ntl demonstrated that the developmental retardation stemmed from inhibited cell migration and growth. These findings provide references for ecotoxicological assessments of different types of surfactants, and play a warning role in the application of surfactants. PMID:26053337

  7. Surfactant-Enhanced Desorption and Biodegradation of Polycyclic Aromatic Hydrocarbons in Contaminated Soil

    Science.gov (United States)

    Zhu, Hongbo; Aitken, Michael D.

    2010-01-01

    We evaluated two nonionic surfactants, one hydrophobic (Brij 30) and one hydrophilic (C12E8), for their ability to enhance the biodegradation of polycyclic aromatic hydrocarbons (PAHs) in contaminated soil after it had been treated in an aerobic bioreactor. The effects of each surfactant were evaluated at doses corresponding to equilibrium aqueous-phase concentrations well above the surfactant’s critical micelle concentration (CMC), slightly above the CMC, and below the CMC. The concentrations of all 3- and 4-ring PAHs were significantly lower in the soil amended with Brij 30 at the two lower doses compared to controls, whereas removal of only the 3-ring PAHs was significantly enhanced at the highest Brij 30 dose. In contrast, C12E8 did not enhance PAH removal at any dose. In the absence of surfactant, surfactants on PAH biodegradation could be explained by their effects on PAH bioavailability. Overall, this study demonstrates that the properties of the surfactant and its dose relative to the corresponding aqueous-phase concentration are important factors in designing systems for surfactant-enhanced bioremediation of PAH-contaminated soils in which PAH bioavailability is limited. PMID:20586488

  8. Lamellar Liquid-Crystalline System with Tunable Iridescent Color by Ionic Surfactants.

    Science.gov (United States)

    Cong, Zhenhua; Lin, Bowen; Li, Weiqing; Niu, Jian; Yan, Feng

    2017-07-18

    Liquid crystals formed by the self-assembly of small molecules are very promising smart materials because of their unique properties, such as self-assembled multivalency, biocompatibility, and fast response to external stimuli. Here we report an iridescent liquid-crystal system composed of water layers, which is sandwiched by two bilayer membranes. Such membranes are composed of a self-assembled nonionic surfactant, which is called hexadecylglyceryl maleate (HGM), and only a small amount of ionic surfactants. It is found that the iridescent color of the liquid crystal system is very sensitive to the concentration of ionic surfactants, even if a trace of change of the ionic surfactants' concentration will induce the color change of liquid-crystal system. The result shows that with the increase in ionic surfactant concentration, the flat bilayer membrane tends to be curved to form some edge-dislocation defects. The appearance of such defects in the lamellar system leads to the decrease in spacing distance between adjacent bilayer membranes. This is because some vacant spaces emerged inevitably during this process. The ionic surfactant-sensitive HGM system also shows the thermal response. It is because the phase-separation results in the increase in local concentration of SDS in the bilayer membrane, which has the same effect as increasing the SDS concentration in the whole system.

  9. Macroscale tribological properties of fluorinated graphene

    Science.gov (United States)

    Matsumura, Kento; Chiashi, Shohei; Maruyama, Shigeo; Choi, Junho

    2018-02-01

    Because graphene is carbon material and has excellent mechanical characteristics, its use as ultrathin lubrication protective films for machine elements is greatly expected. The durability of graphene strongly depends on the number of layers and the load scale. For use in ultrathin lubrication protective films for machine elements, it is also necessary to maintain low friction and high durability under macroscale loads in the atmosphere. In this study, we modified the surfaces of both monolayer and multilayer graphene by fluorine plasma treatment and examined the friction properties and durability of the fluorinated graphene under macroscale load. The durability of both monolayer and multilayer graphene improved by the surface fluorination owing to the reduction of adhesion forces between the friction interfaces. This occurs because the carbon film containing fluorine is transferred to the friction-mating material, and thus friction acts between the two carbon films containing fluorine. On the other hand, the friction coefficient decreased from 0.20 to 0.15 by the fluorine plasma treatment in the multilayer graphene, whereas it increased from 0.21 to 0.27 in the monolayer graphene. It is considered that, in the monolayer graphene, the change of the surface structure had a stronger influence on the friction coefficient than in the multilayer graphene, and the friction coefficient increased mainly due to the increase in defects on the graphene surface by the fluorine plasma treatment.

  10. Synthetic biology approaches to fluorinated polyketides.

    Science.gov (United States)

    Thuronyi, Benjamin W; Chang, Michelle C Y

    2015-03-17

    The catalytic diversity of living systems offers a broad range of opportunities for developing new methods to produce small molecule targets such as fuels, materials, and pharmaceuticals. In addition to providing cost-effective and renewable methods for large-scale commercial processes, the exploration of the unusual chemical phenotypes found in living organisms can also enable the expansion of chemical space for discovery of novel function by combining orthogonal attributes from both synthetic and biological chemistry. In this context, we have focused on the development of new fluorine chemistry using synthetic biology approaches. While fluorine has become an important feature in compounds of synthetic origin, the scope of biological fluorine chemistry in living systems is limited, with fewer than 20 organofluorine natural products identified to date. In order to expand the diversity of biosynthetically accessible organofluorines, we have begun to develop methods for the site-selective introduction of fluorine into complex natural products by engineering biosynthetic machinery to incorporate fluorinated building blocks. To gain insight into how both enzyme active sites and metabolic pathways can be evolved to manage and select for fluorinated compounds, we have studied one of the only characterized natural hosts for organofluorine biosynthesis, the soil microbe Streptomyces cattleya. This information provides a template for designing engineered organofluorine enzymes, pathways, and hosts and has allowed us to initiate construction of enzymatic and cellular pathways for the production of fluorinated polyketides.

  11. Passivation of fluorinated activated charcoal

    Energy Technology Data Exchange (ETDEWEB)

    Del Cul, G.D.; Trowbridge, L.D.; Simmons, D.W.; Williams, D.F.; Toth, L.M.

    1997-10-01

    The Molten Salt Reactor Experiment (MSRE), at the Oak Ridge National Laboratory has been shut down since 1969 when the fuel salt was drained from the core into two Hastelloy N tanks at the reactor site. In 1995, a multiyear project was launched to remediate the potentially hazardous conditions generated by the movement of fissile material and reactive gases from the storage tanks into the piping system and an auxiliary charcoal bed (ACB). The top 12 in. of the ACB is known by gamma scan and thermal analysis to contain about 2.6 kg U-233. According to the laboratory tests, a few feet of fluorinated charcoal are believed to extend beyond the uranium front. The remainder of the ACB should consist of unreacted charcoal. Fluorinated charcoal, when subjected to rapid heating, can decompose generating gaseous products. Under confined conditions, the sudden exothermic decomposition can produce high temperatures and pressures of near-explosive characteristics. Since it will be necessary to drill and tap the ACB to allow installation of piping and instrumentation for remediation and recovery activities, it is necessary to chemically convert the reactive fluorinated charcoal into a more stable material. Ammonia can be administered to the ACB as a volatile denaturing agent that results in the conversion of the C{sub x}F to carbon and ammonium fluoride, NH{sub 4}F. The charcoal laden with NH{sub 4}F can then be heated without risking any sudden decomposition. The only consequence of heating the treated material will be the volatilization of NH{sub 4}F as a mixture of NH{sub 3} and HF, which would primarily recombine as NH{sub 4}F on surfaces below 200 C. The planned scheme for the ACB denaturing is to flow diluted ammonia gas in steps of increasing NH{sub 3} concentration, 2% to 50%, followed by the injection of pure ammonia. This report summarizes the planned passivation treatment scheme to stabilize the ACB and remove the potential hazards. It also includes basic information

  12. Passivation of fluorinated activated charcoal

    International Nuclear Information System (INIS)

    Del Cul, G.D.; Trowbridge, L.D.; Simmons, D.W.; Williams, D.F.; Toth, L.M.

    1997-10-01

    The Molten Salt Reactor Experiment (MSRE), at the Oak Ridge National Laboratory has been shut down since 1969 when the fuel salt was drained from the core into two Hastelloy N tanks at the reactor site. In 1995, a multiyear project was launched to remediate the potentially hazardous conditions generated by the movement of fissile material and reactive gases from the storage tanks into the piping system and an auxiliary charcoal bed (ACB). The top 12 in. of the ACB is known by gamma scan and thermal analysis to contain about 2.6 kg U-233. According to the laboratory tests, a few feet of fluorinated charcoal are believed to extend beyond the uranium front. The remainder of the ACB should consist of unreacted charcoal. Fluorinated charcoal, when subjected to rapid heating, can decompose generating gaseous products. Under confined conditions, the sudden exothermic decomposition can produce high temperatures and pressures of near-explosive characteristics. Since it will be necessary to drill and tap the ACB to allow installation of piping and instrumentation for remediation and recovery activities, it is necessary to chemically convert the reactive fluorinated charcoal into a more stable material. Ammonia can be administered to the ACB as a volatile denaturing agent that results in the conversion of the C x F to carbon and ammonium fluoride, NH 4 F. The charcoal laden with NH 4 F can then be heated without risking any sudden decomposition. The only consequence of heating the treated material will be the volatilization of NH 4 F as a mixture of NH 3 and HF, which would primarily recombine as NH 4 F on surfaces below 200 C. The planned scheme for the ACB denaturing is to flow diluted ammonia gas in steps of increasing NH 3 concentration, 2% to 50%, followed by the injection of pure ammonia. This report summarizes the planned passivation treatment scheme to stabilize the ACB and remove the potential hazards. It also includes basic information, results of laboratory tests

  13. Discovery of Fluorine in Cool Extreme Helium Stars

    OpenAIRE

    Pandey, Gajendra

    2006-01-01

    Neutral fluorine (F I) lines are identified in the optical spectra of cool EHe stars. These are the first identification of F I lines in a star's spectrum, and provide the first measurement of fluorine abundances in EHe stars. The results show that fluorine is overabundant in EHe stars. The overabundance of fluorine provides evidence for the synthesis of fluorine in these stars, that is discussed in the light of asymptotic giant branch (AGB) evolution, and the expectation from accretion of an...

  14. Super-hydrophobic fluorine containing aerogels

    Science.gov (United States)

    Coronado, Paul R [Livermore, CA; Poco, John F [Livermore, CA; Hrubesh, Lawrence W [Pleasanton, CA

    2007-05-01

    An aerogel material with surfaces containing fluorine atoms which exhibits exceptional hydrophobicity, or the ability to repel liquid water. Hydrophobic aerogels are efficient absorbers of solvents from water. Solvents miscible with water are separated from it because the solvents are more volatile than water and they enter the porous aerogel as a vapor across the liquid water/solid interface. Solvents that are immisicble with water are separated from it by selectively wetting the aerogel. The hydrophobic property is achieved by formulating the aerogel using fluorine containing molecules either directly by addition in the sol-gel process, or by treating a standard dried aerogel using the vapor of fluorine containing molecules.

  15. TiO2-Mediated Photocatalytic Mineralization of a Non-Ionic Detergent: Comparison and Combination with Other Advanced Oxidation Procedures

    Directory of Open Access Journals (Sweden)

    Péter Hegedűs

    2015-01-01

    Full Text Available Triton X-100 is one of the most widely-applied man-made non-ionic surfactants. This detergent can hardly be degraded by biological treatment. Hence, a more efficient degradation method is indispensable for the total mineralization of this pollutant. Application of heterogeneous photocatalysis based on a TiO2 suspension is a possible solution. Its efficiency may be improved by the addition of various reagents. We have thoroughly examined the photocatalytic degradation of Triton X-100 under various circumstances. For comparison, the efficiencies of ozonation and treatment with peroxydisulfate were also determined under the same conditions. Besides, the combination of these advanced oxidation procedures (AOPs were also studied. The mineralization of this surfactant was monitored by following the TOC and pH values, as well as the absorption and emission spectra of the reaction mixture. An ultra-high-performance liquid chromatography (UHPLC method was developed and optimized for monitoring the degradation of Triton X-100. Intermediates were also detected by GC-MS analysis and followed during the photocatalysis, contributing to the elucidation of the degradation mechanism. This non-ionic surfactant could be efficiently degraded by TiO2-mediated heterogeneous photocatalysis. However, surprisingly, its combination with the AOPs applied in this study did not enhance the rate of the mineralization. Moreover, the presence of persulfate hindered the photocatalytic degradation.

  16. Insertion of anisotropic particles in lamellar surfactant phases

    International Nuclear Information System (INIS)

    Grillo, Isabelle

    1998-01-01

    We search for the interactions governing the possibility to mix organic and inorganic colloids. We use laponite, a synthetic anionic clay, made of 30 nm diameter and 1 nm thickness anisotropic disks. Three surfactant Systems, an anionic one (AOT), a cationic one (DDAB) and a nonionic one (C 12 E 5 ) investigate three different cases of interaction forces. We establish experimentally the equilibrium phase diagrams and characterise the structure of these ternary Systems by SANS and SAXS experiments. We quantify the adsorption. An AOT bilayer surround the particle edges; an almost complete bilayer of DDAB and C 12 E 5 is formed on the basal faces. SANS contrast variation experiments under controlled conditions along the adsorption isotherm of C 12 E 5 allow to determine the average thickness of the adsorbed surfactant layer. In the monophasic lamellar domain, the particles stay between the membranes, when the spacing is larger than the particle thickness. In the biphasic domain, dense clay aggregates are in equilibrium with a lamellar phase, containing few amount of particles. They enter in the AOT bilayers when the space between the bilayers are smaller than 8 A. From the phase diagram and interaction forces study, three conditions of stability emerge: - an osmotic one: the osmotic lamellar pressure is higher or equal to the colloidal one. - an energetic one: the interaction energy between a particle and the surfactant bilayer is close to the particle energy in aqueous suspension. - an entropic one: particles should not inhibit the stabilising fluctuations of the lamellar phase. (author) [fr

  17. Influence of surfactants on the morphology of SnO{sub 2} nanocrystals prepared via a hydrothermal method

    Energy Technology Data Exchange (ETDEWEB)

    Wang Mi [State Key Laboratory of Chemical Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237 (China); Shanghai Institute of Ceramics (SIC), Chinese Academy of Sciences (CAS), 1295 Dingxi Road, Shanghai 200050 (China); Gao Yanfeng, E-mail: yfgao@mail.sic.ac.cn [Shanghai Institute of Ceramics (SIC), Chinese Academy of Sciences (CAS), 1295 Dingxi Road, Shanghai 200050 (China); Dai Lei; Cao Chuanxiang [Shanghai Institute of Ceramics (SIC), Chinese Academy of Sciences (CAS), 1295 Dingxi Road, Shanghai 200050 (China); Guo Xuhong, E-mail: guoxuhong@ecust.edu.cn [State Key Laboratory of Chemical Engineering, East China University of Science and Technology, 130 Meilong Road, Shanghai 200237 (China)

    2012-05-15

    Nanoscaled SnO{sub 2} with different morphologies has been synthesized via a simple hydrothermal process at 180 Degree-Sign C using polyvinylpyrrolidone (PVP), sodium dodecyl sulfonate (SDS), cetyl trimethyl ammonium bromide (CTAB) or tetrapropyl ammonium bromide (TPAB) as surfactant. All the prepared SnO{sub 2} are of a tetragonal crystal structure. Nanocubes, nanorods, nanosheets, nanobelts and nanoparticles were prepared when changing the type and dosage of organic surfactants. It is shown that anionic surfactant (SDS) and cationic surfactant (CTAB or TPAB) at their suitable addition amounts can largely influence the morphologies of SnO{sub 2} nanocrystals. The effect is significantly dependent on the solvent types: water or ethanol. The non-ionic surfactant (PVP) can also change the morphologies like SDS but the impacts are less obvious. The effect of surfactants on the shape and size of SnO{sub 2} nanoparticles was discussed in detail. The particle growth mechanism is described based on the electrostatic interactions and Van der Waals' forces. - Graphical abstract: SnO{sub 2} nanocrystals with controllable morphologies were prepared via a hydrothermal method with surfactants. Highlights: Black-Right-Pointing-Pointer SnO{sub 2} nanocrystals were prepared via a hydrothermal method with surfactants. Black-Right-Pointing-Pointer SnO{sub 2} morphologies changed with the type and the dosage of surfactants. Black-Right-Pointing-Pointer The effect of surfactants on the growth of crystal planes was studied. Black-Right-Pointing-Pointer The controlling mechanisms of surfactants on SnO{sub 2} morphologies were discussed.

  18. Taming Metal/Fluorine Carbenoids.

    Science.gov (United States)

    Molitor, Sebastian; Feichtner, Kai-Stephan; Gessner, Viktoria H

    2017-02-21

    Although Li/Cl carbenoids are versatile reagents in organic synthesis, the controlled handling of the extremely reactive and labile M/F carbenoids remains a challenge. We now show that even these compounds can be stabilized and isolated in solid state, as well as in solution. Particularly the sodium and potassium compounds exhibit a remarkable stability, thus allowing the first isolation of a room-temperature-stable fluorine carbenoid. Spectroscopic, as well as DFT studies confirmed the pronounced carbenoid character, showing M-F-C interactions with elongated C-F bonds. The different stabilities of the carbenoids was found to originate from the different strength of the M-F interaction. Hence, the lithium compounds are considerably more reactive than their heavier congeners. Reactivity studies showed that the nature of the metal also influences the reactivity, resulting in different selectivity in the addition to thioketones. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Surface modification of polypropylene nonwoven fabrics via covalent immobilization of nonionic sugar-based surfactants

    Energy Technology Data Exchange (ETDEWEB)

    Xin, Zhirong, E-mail: xinzhirong2012@126.com; Yan, Shunjie; Ding, Jiaotong; Yang, Zongfeng; Du, Binbin; Du, Shanshan

    2014-05-01

    Graphical abstract: - Highlights: • Amphiphilic N-alkyl-1-amino-1-deoxy-D-glucitol were prepared. • The pGMA-grafted membranes were obtained via photo-grafting of glycidyl methacrylate. • Amphiphilic C{sub n}AG were covalent immobilized onto the pGMA-grafted membranes. • The C{sub n}AG-grafted membranes obviously suppressed protein adsorption and platelet adhesion. - Abstract: Amphiphilic N-alkyl-1-amino-1-deoxy-D-glucitol (C{sub n}AG, n = 8, 12) were successfully prepared. Polypropylene nonwoven fabrics (PP{sub NWF}) were grafted with glycidyl methacrylate (GMA) via a technique of UV-induced graft polymerization combined with plasma pre-treatment, and then PP{sub NWF}-g-GMA was used for the covalent immobilization of C{sub n}AG. The surface graft polymerization was confirmed by ATR-FTIR and XPS, respectively. Effect of grafting parameters, e.g., acetone content, monomer concentration and UV irradiation time on the grafting density of GMA was investigated. And the hemocompatibility of the modified PP{sub NWF} was evaluated by protein adsorption and platelet adhesion. It was founded that the C{sub n}AG-modified substrates greatly suppressed protein adsorption and platelet adhesion compared with the native and pGMA-grafted PP{sub NWF}.

  20. Synthesis of nonionic surfactants with azole ring bearing N-glycosides and their antibacterial activity

    Directory of Open Access Journals (Sweden)

    Fawzia Taieb Brahimi

    2017-05-01

    Full Text Available Six azoles with n-pentyl side chain 6–9, 11 and 12 were synthesized from n-hexanoic acid. Three N-glycosides namely: 5-pentyl-2-(d-amino arabinoside-1,3,4-oxadiazole (13, 5-pentyl-2-(d-aminoglycoside-1,3,4-thiadiazole (14, and 3-pentyl-4-(d-amino xyloside-4H-1,2,4-triazole-5-thiol (15 were prepared from already synthesized n-pentyl azoles 6, 7 and 11, respectively. Surface activity properties of water soluble synthesized compounds 6, 7, and 11–15 were studied in terms of surface tension, cloud point and critical micelle concentration. The antibacterial activities were assessed using the paper disk diffusion and broth dilution methods against gram-positive and gram-negative bacteria. Some of the synthetic compounds showed promising activity against microorganisms under test in comparison to commercially available antibiotics polymixine and oxytetracycline.

  1. Spectrophotometric determination of uranium with 2-thenoyltrifluoroacetone and trioctylphosphine oxide in aqueous solution containing nonionic surfactant

    International Nuclear Information System (INIS)

    Taketatsu, Tomitsugu; Aihara, Makoto; Kimoto, Yuuko.

    1981-01-01

    The uranium (VI)-2-thenoyltrifluoroacetone (TTA)-trioctylphosphine oxide (TOPO) mixed complexes are easily solubilized in an aqueous solution containing nona oxyethylene dodecyl ether (BL-9EX). The solubilized complexes give an absorption maximum at 376 nm which can be applied to the spectrophotometric determination of uranium. The adopted procedure is as follows: Transfer a dilute acidic solution containing less than about 400 μg of uranyl ions to a beaker. Add 5 ml of 1 x 10 -2 M TTA/2 x 10 -3 M TOPO/2.5% (w/v) BL-9EX aqueous solution and 2 ml of acetate buffer solution (pH 3.7) to the beaker. Adjust the pH to (3.5 -- 4.0) with dilute hydrochloric acid or sodium hydroxide solution. Then, transfer the solution to a 25-ml volumetric flask and dilute to the mark with distilled water. Measure the absorbance of the solution in a 1-cm quartz cell at 376 nm against a reagent blank. Beer's law was obeyed in the range of 0 -- 16 μg ml -1 of uranyl ion. The presence of 100-fold amount of sulfate and nitrate ions and 10-fold amount of magnesium and calcium ions did not interfere. Ten-fold amount of zinc, cadmium, lead ions and equi-amount of cobalt, nickel, copper, aluminum, iron (III), chromium (III), thorium and zirconium ions caused serious interference. But reasonable values were obtained by addition of EDTA as a masking agent. The molar absorption coefficient was 2.1 x 10 4 cm -1 mol -1 dm 3 . The combined ratio of the solubilized complex was UO 2 2+ :TTA:TOPO = 1:2:1. (author)

  2. Surface modification of polypropylene nonwoven fabrics via covalent immobilization of nonionic sugar-based surfactants

    International Nuclear Information System (INIS)

    Xin, Zhirong; Yan, Shunjie; Ding, Jiaotong; Yang, Zongfeng; Du, Binbin; Du, Shanshan

    2014-01-01

    Graphical abstract: - Highlights: • Amphiphilic N-alkyl-1-amino-1-deoxy-D-glucitol were prepared. • The pGMA-grafted membranes were obtained via photo-grafting of glycidyl methacrylate. • Amphiphilic C n AG were covalent immobilized onto the pGMA-grafted membranes. • The C n AG-grafted membranes obviously suppressed protein adsorption and platelet adhesion. - Abstract: Amphiphilic N-alkyl-1-amino-1-deoxy-D-glucitol (C n AG, n = 8, 12) were successfully prepared. Polypropylene nonwoven fabrics (PP NWF ) were grafted with glycidyl methacrylate (GMA) via a technique of UV-induced graft polymerization combined with plasma pre-treatment, and then PP NWF -g-GMA was used for the covalent immobilization of C n AG. The surface graft polymerization was confirmed by ATR-FTIR and XPS, respectively. Effect of grafting parameters, e.g., acetone content, monomer concentration and UV irradiation time on the grafting density of GMA was investigated. And the hemocompatibility of the modified PP NWF was evaluated by protein adsorption and platelet adhesion. It was founded that the C n AG-modified substrates greatly suppressed protein adsorption and platelet adhesion compared with the native and pGMA-grafted PP NWF

  3. Fluorine disposal processes for nuclear applications

    Energy Technology Data Exchange (ETDEWEB)

    Netzer, W.D.

    1977-04-08

    A study was performed to determine the best method for disposing of waste fluorine in the effluent from a uranium oxide conversion facility. After reviewing the fluorine disposal literature and upon considering the nuclear safety constraints, it was determined that the two most promising processes were the fluidized alumina bed and the caustic scrubber. To obtain more design data for the latter process, a 3-stage, 5-in. I.D. spray tower was constructed and operated. This unit used a 10% potassium hydroxide solution at flows of 1.5 to 3 gpm and achieved a 90% fluorine efficiency at fluorine flowrates as high as 4 scfm. However, two toxic by-products, oxygen difluoride and nitroxy fluoride, were detected in the effluent gases. After considering the relative merits of both disposal processes, it is concluded that the fluidized bed is superior, especially if the contaminated waste material were salable.

  4. Fluorine disposal processes for nuclear applications

    International Nuclear Information System (INIS)

    Netzer, W.D.

    1977-01-01

    A study was performed to determine the best method for disposing of waste fluorine in the effluent from a uranium oxide conversion facility. After reviewing the fluorine disposal literature and upon considering the nuclear safety constraints, it was determined that the two most promising processes were the fluidized alumina bed and the caustic scrubber. To obtain more design data for the latter process, a 3-stage, 5-in. I.D. spray tower was constructed and operated. This unit used a 10% potassium hydroxide solution at flows of 1.5 to 3 gpm and achieved a 90% fluorine efficiency at fluorine flowrates as high as 4 scfm. However, two toxic by-products, oxygen difluoride and nitroxy fluoride, were detected in the effluent gases. After considering the relative merits of both disposal processes, it is concluded that the fluidized bed is superior, especially if the contaminated waste material were salable

  5. Effects of Surfactant on the Transport of Toxoplasma gondii in Saturated Sandy Porous Media: Experimental Tests and Modeling

    Science.gov (United States)

    Darnault, C. J. G.; Mutty, T.; L'Ollivier, C.; Dubey, J. P.; Aurélien, D.; Pullano, C. P.

    2017-12-01

    Understanding the transport of pathogens in the subsurface environment is essential for the risk assessment of groundwater contamination and the potential threat to human health. Currently, there is a lack of research in particular concerning the fate and transport of Toxoplasma gondii in porous media. The purpose of this research will be to characterize and model the transport and retention of Toxoplasma gondii in saturated silica-sand porous media in the presence of surfactant. Surfactants are chemicals commonly used as detergents and soaps, however they are able to impact flow properties in porous media and the interactions between surfaces, such as oocysts walls with sand grains. Therefore, we chose to characterize the changes that two surfactants have on the transport and fate of T. gondii. A total of 14 Column experiments were conducted including replicates as follows: 6 columns with an anionic-surfactant solution, 6 with a nonionic-surfactant solution, and 2 columns without surfactant to act as controls. All of the columns contained fine sand as the dominant grain size and each was run with a specified saturated flow rate in order to analyze the change with surfactant and disregard change as a result of a variation in the pore velocity. We chose to determine the retention and flow using the classic clean-bed colloid filtration model, and implemented sources for both adsorption and desorption of the particles which is known to happen on other biocolloids including oocysts. We implemented both Linear alkylbenzene sulphonic acid and Alkylphenol ethoxylate as our surfactants since they are the anionic and nonionic surfactants most commonly found in wastewater. Three different Critical Micelle Concentrations (CMC's) were run through the columns prior to the T. gondii oocysts injection followed by sequential injection of surfactant only and then deionized water only. The study compares the breakthrough of T. gondii with surfactant, without surfactant, as well as a

  6. Special Feature Organo-Fluorine Chemical Science

    OpenAIRE

    Helmut Martin Hügel; Neale Jackson

    2012-01-01

    Fluorine is the 13th most abundant element and, with other fluorine containing functional groups, is a most effective element in biological substances, pharmaceuticals, agrochemicals, liquid crystals, dyes, polymers and a wide range of consumer products. This reflects its resistance to metabolic change due to the strength of the C-F bond providing biological stability and the application of its nonstick-interfacial physical characteristics. Its introduction often remains a synthetic challenge...

  7. Reactivity of simulated lunar material with fluorine

    Science.gov (United States)

    Odonnell, P. M.

    1972-01-01

    Simulated lunar surface material was caused to react with fluorine to determine the feasibility of producing oxygen by this method. The maximum total fluorine pressure used was 53.3 kilonewtons per square meter (400 torr) at temperatures up to 523 K (250 C). Postreaction analysis of both the gas and solid phases indicated that the reaction is feasible but that the efficiency is only about 4 percent of that predicted by theory.

  8. Quantification of Fluorine Content in AFFF Concentrates

    Science.gov (United States)

    2017-09-29

    expensive and time consuming . Newer analytical methods focus on detection and measurement of the fluorine- containing molecule which frequently...formulations, an analysis 19F NMR spectra wherein profiles somewhat unique to individual commercial AFFF can be identified and a fluorine content comparison...establishing a volatiles profile along with a non- volatiles or solids content for an AFFF concentrate. These concentrates have a strong potential

  9. Enantioselective catalytic fluorinative aza-semipinacol rearrangement.

    Science.gov (United States)

    Romanov-Michailidis, Fedor; Pupier, Marion; Besnard, Céline; Bürgi, Thomas; Alexakis, Alexandre

    2014-10-03

    An efficient and highly stereoselective fluorinative aza-semipinacol rearrangement is described. The catalytic reaction requires use of Selectfluor in combination with the chiral, enantiopure phosphate anion derived from acid L3. Under optimized conditions, cyclopropylamines A were transformed into β-fluoro cyclobutylimines B in good yields and high levels of diastereo- and enantiocontrol. Furthermore, the optically active cyclobutylimines were reduced diastereoselectively with L-Selectride in the corresponding fluorinated amines C, compounds of significant interest in the pharmacological industry.

  10. Recent advances in green fluorine chemistry

    OpenAIRE

    Hu, Jinbo; Zeng,Yuwen

    2015-01-01

    Yuwen Zeng, Jinbo HuKey Laboratory of Organofluorine Chemistry, Shanghai Institute of Organic Chemistry, Chinese Academy of Sciences, Shanghai, People’s Republic of ChinaAbstract: Fluorinated compounds are intriguing for the development of pharmaceuticals, agrochemicals, and materials, and thus, much effort has been exerted to develop more general and efficient approaches for introducing fluorine atom(s) or fluoroalkyl group(s) into organic molecules. Although many traditional metho...

  11. The adsorption of surfactant at the amorphous polymer solution interface

    International Nuclear Information System (INIS)

    Gilchrist, Valerie A.

    2001-01-01

    Adsorption of surfactants onto amorphous polymers at the solid-solution interface is of direct relevance to many industrial sectors ranging from food, pharmaceuticals, paints, paper and photographic colour films. Although it is widely accepted that surfactants play the underpinning role in these applications, little is currently understood about the interactions between surfactants and polymeric materials at the molecular level. This lack of progress is mainly due to the inability of most existing techniques in probing this type of structural information at the wet interface. Specular neutron reflection (SNR) is a recently developed technique capable of detecting structural information with resolution down to a few angstroms (A). When combined with deuterium labeling, it is possible to distinguish the surfactant from the polymeric species at the interface. The aim of this work is to explore the appropriate experimental approach that utilizes the potential of neutron reflection to unravel molecular information about the actions of surfactants. A major progress that was made in the project was the -development of experimental protocols for the formation of smooth polymeric thin films onto neutron transparent substrates. This experimental process was substantially supported by spectroscopic ellipsometry (SE), a home-based laboratory optical system that was also highly sensitive to film thickness and composition. This exploratory work has mainly used model polymeric samples that are of broader implications to various technological applications. A nonionic alkyl ethoxylate surfactant, such as C 12 E 5 was chosen because its interfacial behaviour has been widely examined. Measurements were made over a wide concentration range around the critical micellar concentration (cmc), using specially designed cells. In the case of PMMA (poly(methylmethacrylate)), adsorption of C 12 E 5 was found to be completely reversible with no observable penetration of the surfactant into the

  12. Changes in hydration of the stratum corneum are the most suitable indicator to evaluate the irritation of surfactants on the skin.

    Science.gov (United States)

    Fujimura, T; Shimotoyodome, Y; Nishijima, T; Sugata, K; Taguchi, H; Moriwaki, S

    2017-02-01

    Irritancy levels of surfactants on human skin have not been clarified completely. The relationships between skin damage and changes of skin properties caused by various surfactants were investigated using non-invasive measurements. Aqueous solutions of seven kinds of anionic, non-ionic, and amphoteric surfactants were exposed to the inside of forearm skin of 20 human subjects in two separate studies using the cup method. Hydration of the stratum corneum (SC), transepidermal water loss (TEWL), pH, skin surface roughness, and contents of the SC were measured before and after one exposure and after five and nine consecutive exposures to various surfactants. The discontinuation ratio of subjects for testing in each surfactant was determined by skin irritation symptoms and was defined as the degree of skin damage. Significant changes were observed only in hydration, TEWL, and natural moisturizing factors (NMF) content in the SC following surfactant exposure. A significant correlation was observed between the discontinuation ratio of each surfactant and the changes of hydration, TEWL, and NMF. Especially, the change of SC hydration showed an excellent correlation with the discontinuation ratio both for single (r = 0.942, P surfactants, and therefore is the most suitable indicator to evaluate the irritation of surfactants on the skin. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  13. Diseases of Pulmonary Surfactant Homeostasis

    Science.gov (United States)

    Whitsett, Jeffrey A.; Wert, Susan E.; Weaver, Timothy E.

    2015-01-01

    Advances in physiology and biochemistry have provided fundamental insights into the role of pulmonary surfactant in the pathogenesis and treatment of preterm infants with respiratory distress syndrome. Identification of the surfactant proteins, lipid transporters, and transcriptional networks regulating their expression has provided the tools and insights needed to discern the molecular and cellular processes regulating the production and function of pulmonary surfactant prior to and after birth. Mutations in genes regulating surfactant homeostasis have been associated with severe lung disease in neonates and older infants. Biophysical and transgenic mouse models have provided insight into the mechanisms underlying surfactant protein and alveolar homeostasis. These studies have provided the framework for understanding the structure and function of pulmonary surfactant, which has informed understanding of the pathogenesis of diverse pulmonary disorders previously considered idiopathic. This review considers the pulmonary surfactant system and the genetic causes of acute and chronic lung disease caused by disruption of alveolar homeostasis. PMID:25621661

  14. A Comprehensive Framework for Surfactant Selection and Design for Emulsion Based Chemical Product Design

    DEFF Research Database (Denmark)

    Mattei, Michele; Kontogeorgis, Georgios; Gani, Rafiqul

    2014-01-01

    The manufacture of emulsified products is of increasing interest in the consumer oriented chemical indus-try. Several cosmetic, house-hold and pharmaceutical products are in the emulsified form when soldand/or they are expected to form an emulsion when used. Therefore, there is a need for the dev......The manufacture of emulsified products is of increasing interest in the consumer oriented chemical indus-try. Several cosmetic, house-hold and pharmaceutical products are in the emulsified form when soldand/or they are expected to form an emulsion when used. Therefore, there is a need...... ingredientsis consequently necessary to tackle this problem with computer-aided methods and tools. A compre-hensive framework for the selection and design of surfactants, the main responsible for the formationand the stability of emulsions, is presented here together with the modeling of the cloud point, a key......-property of nonionic surfactants, with a group-contribution model. The mathematical formulation of astandard product design problem is presented, together with the list of both the pure component prop-erties (related to nonionic surfactants) and the mixture properties (relevant to the overall products asan emulsion...

  15. 40 CFR 415.400 - Applicability; description of the fluorine production subcategory.

    Science.gov (United States)

    2010-07-01

    ... fluorine production subcategory. 415.400 Section 415.400 Protection of Environment ENVIRONMENTAL PROTECTION... CATEGORY Fluorine Production Subcategory § 415.400 Applicability; description of the fluorine production... fluorine by the liquid hydrofluoric acid electrolysis process. ...

  16. Reference values for fluorine-18-fluorodeoxyglucose and fluorine-18-sodium fluoride uptake in human arteries

    DEFF Research Database (Denmark)

    Blomberg, Björn A; Thomassen, Anders; de Jong, Pim A

    2017-01-01

    OBJECTIVE: Reference values of fluorine-18-fluorodeoxyglucose (F-FDG) and fluorine-18-sodium fluoride (F-NaF) uptake in human arteries are unknown. The aim of this study was to determine age-specific and sex-specific reference values of arterial F-FDG and F-NaF uptake. PARTICIPANTS AND METHODS...

  17. Fluorination of uranium compounds by gaseous bromine trifluoride and a bromine-fluorine mixture

    International Nuclear Information System (INIS)

    Sakurai, Tsutomu

    1976-03-01

    This report summarizes the studies of fluorination of uranium compounds by gaseous BrF 3 and a Br 2 -F 2 mixture, which were carried out in Fluorine Chemistry Laboratory of JAERI in connection with the reprocessing method of nuclear fuels. Although thermodynamically more stable than F 2 , BrF 3 has higher reactivity at relatively low temperatures: fluorination of uranium compounds can be carried out at 100 0 -- 200 0 C by using gaseous BrF 3 . This fluorination temperature is lower than those of F 2 , BrF 5 , ClF and SF 4 , and close to that of ClF 3 . The usage of BrF 3 has however the drawbacks that it requires additional devices to heat the corrosive liquid and to remove Br 2 produced as a byproduct. In order to eliminate the difficulties indicated, a new method of fluorination was developed - the use of a Br 2 -F 2 mixture. Addition of small amounts of Br 2 to the fluorine flow (about 6% in relation to the fluorine concentration) gives marked effects on the rate of fluorination. (auth.)

  18. Impact of model perfumes on surfactant and mixed surfactant self-assembly.

    Science.gov (United States)

    Penfold, J; Tucker, I; Green, A; Grainger, D; Jones, C; Ford, G; Roberts, C; Hubbard, J; Petkov, J; Thomas, R K; Grillo, I

    2008-11-04

    The impact of some model perfumes on surfactant self-assembly has been investigated, using small-angle neutron scattering. A range of different model perfumes, with differing degrees of hydrophilicity/hydrophobicity, have been explored, and in order of increasing hydrophobicity include phenyl ethanol (PE), rose oxide (RO), limonene (LM), linalool (LL), and dihydrogen mercenol (DHM). The effect of their solubilization on the nonionic surfactant micelles of dodecaethylene monododecyl ether (C12EO12) and on the mixed surfactant aggregates of C12EO12 and the cationic dialkyl chain surfactant dihexadecyl dimethyl ammonium bromide (DHDAB) has been quantified. For PE and LL the effect of their solubilization on the micelle, mixed micelle/lamellar and lamellar regimes of the C12EO12/DHDAB mixtures, has also been determined. For the C12EO12 and mixed DHDAB/C12EO12 micelles PE is solubilized predominantly at the hydrophilic/hydrophobic interface, whereas the more hydrophobic perfumes, from RO to DHM, are solubilized predominantly in the hydrophobic core of the micelles. For the C12EO12 micelles, with increasing perfume concentration, the more hydrophobic perfumes (RO to DHM) promote micellar growth. Relatively modest growth is observed for RO and LM, whereas substantial growth is observed for LL and DHM. In contrast, for the addition of PE the C12EO12 micelles remain as relatively small globular micelles, with no significant growth. For the C12EO12/DHDAB mixed micelles, the pattern of behavior with the addition of perfume is broadly similar, except that the micellar growth with increasing perfume concentration for the more hydrophobic perfumes is less pronounced. In the Lbeta (Lv) region of the DHDAB-rich C12EO12/DHDAB phase diagram, the addition of PE results in a less structured (less rigid) lamellar phase, and ultimately a shift toward a structure more consistent with a sponge or bicontinuous phase. In the mixed L1/Lbeta region of the phase diagram PE induces a slight

  19. Coacervation with surfactants: From single-chain surfactants to gemini surfactants.

    Science.gov (United States)

    Zhao, Weiwei; Wang, Yilin

    2017-01-01

    Coacervation is a spontaneous process during which a colloidal dispersion separates into two immiscible liquid phases: a colloid-rich liquid phase in equilibrium with a diluted phase. Coacervation is usually divided into simple coacervation and complex coacervation according to the number of components. Surfactant-based coacervation normally contains traditional single-chain surfactants. With the development of surfactants, gemini surfactants with two amphiphilic moieties have been applied to form coacervation. This review summarizes the development of simple coacervation and complex coacervation in the systems of single-chain surfactants and gemini surfactants. Simple coacervation in surfactant solutions with additives or at elevated temperature and complex coacervation in surfactant/polymer mixtures by changing charge densities, molecular weight, ionic strength, pH, or temperature are reviewed. The comparison between gemini surfactants and corresponding monomeric single-chain surfactants reveals that the unique structures of gemini surfactants endow them with higher propensity to generate coacervation. Copyright © 2016 Elsevier B.V. All rights reserved.

  20. Destabilization Mechanism of Ionic Surfactant on Curcumin Nanocrystal against Electrolytes

    Directory of Open Access Journals (Sweden)

    Heni Rachmawati

    2016-10-01

    Full Text Available We have successfully developed curcumin nanosuspension intended for oral delivery. The main purpose is to improve bioavailability through enhancing its solubility. The nanoparticles were stabilized using various stabilizers, including polyvinyl pyrrolidone (PVP, polyvinyl alcohol (PVA, sodium carboxymethylcellulose (Na-CMC, d-α-tocopheryl polyethylene glycol 1000 succinate (TPGS, and sodium dodecyl sulfate (SDS. The average diameter of particles, microscopic appearance, and sedimentation of each preparation was observed and compared. Each stabilizer demonstrated a different degree of inhibition of particle aggregation under electrolyte-containing simulated gastrointestinal (GIT fluid. Non-ionic stabilizers (PVA, PVP, and TPGS were shown to preserve the nanosuspension stability against electrolytes. In contrast, strong ionic surfactants such as SDS were found to be very sensitive to electrolytes. The results can provide useful information for the formulators to choose the most suitable stabilizers by considering the nature of stabilizers and physiological characteristics of the target site of the drug.

  1. Effects of soluble surfactants on the deformation and breakup of stretching liquid bridges.

    Science.gov (United States)

    Liao, Ying-Chih; Subramani, Hariprasad J; Franses, Elias I; Basaran, Osman A

    2004-11-09

    Surfactants are routinely used to control the breakup of drops and jets in many applications such as inkjet printing, crop spraying, and DNA or protein microarraying. The breakup of surfactant-free drops and jets has been extensively studied. By contrast, little is known about the closely related problem of interface rupture when surfactants are present. Solutions of a nonionic surfactant, pentaethylene glycol monododecyl ether, or C12E5, in water and in 90 wt % glycerol/water are used to show the effects of surfactant and viscosity on the deformation and breakup dynamics of stretching liquid bridges. Equilibrium surface tensions for both solutions can be fitted with the Langmuir-Szyskowski equation. All experiments have been done at 24 degrees C. The critical micelle concentrations for C12E5 are 0.04 and 0.4 mM in water and the glycerol/water solution, respectively. With high-speed imaging, the dynamic shapes of bridges held captive between two rods of 3.15 mm diameter are captured and analyzed with a time resolution of 0.1-1 ms. The bridge lengths are 3.15 mm initially and about 5-7 mm at pinch-off. Breakup occurs after stretching for about 0.2-0.3 s, depending on the solution viscosity and the surfactant concentration. When the liquid bridges break up, the volume of the sessile drop left on the bottom rod is about 3 times larger than that of the pendant drop left on the top rod. This asymmetry is due to gravity and is influenced by the equilibrium surface tensions. Surfactant-containing low-viscosity water bridges are shown to break up faster than surfactant-free ones because of the effect of gravity. With or without surfactant, water bridges form satellite drops. Surfactant-containing high-viscosity glycerol/water bridges break up more slowly than surfactant-free ones because of strong viscous effects. Moreover, the shapes of the sessile drops close to breakup exhibit a "pear-like" tip; whether a satellite forms depends on the surface age of the bridge before

  2. Non-Ionizing Radiation: Nature and Protection

    International Nuclear Information System (INIS)

    Abukasem, E.; Abdemalek, H.; Mosbah, D. S.

    2011-01-01

    Last century, the humanity witnessed a vast development, after the industrial revolution, in many aspects of life. There was a real revolution in world of communications, the electromagnetic waves were produced and used in many applications like wireless communications, radio and television transmissions, information transfer, medical diagnosis and many other useful applications. Non-ionizing radiation, the radiation which has no enough energy to remove an electron from an atom, becomes indispensable life necessity and currently it is a subject of public debate about its effects and hazards on human life and environments. The Arab Atomic Energy Agency recognized this fact and tried to raise the public awareness towards by organizing seminars, workshops and expert meetings in the Arab region in order to study the theoretical and applies aspects of this type of radiation as well as to shed the light on its possible hazards and effects on human life. This booklet came as a result of many expert meetings to be an Arabic simple and comprehensive guide line about the nature of and the different methods of protection from its possible effects and hazards.(author)

  3. Non-ionizing radiation: an occupational apathy

    International Nuclear Information System (INIS)

    Mohd Yusof Mohd Ali

    2000-01-01

    Non-ionizing radiation, NIR, is widely used in various modern applications to the extent that its presence is common in some work places. However, due to inability of human beings to detect its presence make the radiation 'invisible' to the workers most of the time. Of late it is known that the radiation can be hazardous to human health if the exposure received is excessively high. Such proven health effects has led international organizations, such as, IRPA establishing standard guidelines and maximum permissible limits to control its exposure. Recent studies reveal that some work places do indicate the presence of the radiation at levels far exceeding the IRPA recommended limits. It is, therefore, the objective of this paper to highlight such hazardous situations, magnitude of the hazards involved and ways and means how to overcome the hazard so that workers can take necessary precaution and action to minimize the health risk associated with the hazard. However, due to time and space constraint, only five types of the NIR are elaborated in this paper, namely ELF, RF and microwave, UV, IR and laser

  4. Ultrafiltration modeling of non-ionic microgels.

    Science.gov (United States)

    Roa, Rafael; Zholkovskiy, Emiliy K; Nägele, Gerhard

    2015-05-28

    Membrane ultrafiltration (UF) is a pressure driven process allowing for the separation and enrichment of protein solutions and dispersions of nanosized microgel particles. The permeate flux and the near-membrane concentration-polarization (CP) layer in this process is determined by advective-diffusive dispersion transport and the interplay of applied and osmotic transmembrane pressure contributions. The UF performance is thus strongly dependent on the membrane properties, the hydrodynamic structure of the Brownian particles, their direct and hydrodynamic interactions, and the boundary conditions. We present a macroscopic description of cross-flow UF of non-ionic microgels modeled as solvent-permeable spheres. Our filtration model involves recently derived semi-analytic expressions for the concentration-dependent collective diffusion coefficient and viscosity of permeable particle dispersions [Riest et al., Soft Matter, 2015, 11, 2821]. These expressions have been well tested against computer simulation and experimental results. We analyze the CP layer properties and the permeate flux at different operating conditions and discuss various filtration process efficiency and cost indicators. Our results show that the proper specification of the concentration-dependent transport coefficients is important for reliable filtration process predictions. We also show that the solvent permeability of microgels is an essential ingredient to the UF modeling. The particle permeability lowers the particle concentration at the membrane surface, thus increasing the permeate flux.

  5. Effect of surfactants and temperature on germination and vegetative growth of Beauveria bassiana

    Directory of Open Access Journals (Sweden)

    Lizzy A. Mwamburi

    2015-03-01

    Full Text Available Three non-ionic surfactants: Tween20, Tween80 and Breakthru® were screened for their effects on spore germination and mycelial growth rates and for their influence on three isolates of Beauveria bassianaspore germination at various temperatures. Tween20 and Tween80 were compatible with all the B. bassiana isolates in the germination studies, but inhibited germination at higher surfactant concentrations, irrespective of the conidial concentrations. Breakthru® had an inhibitory effect on germination even at the lowest concentration of 0.1% on all the B. bassiana isolates. The effects of the surfactants on spore germination did not correspond with their effects on colony growth. Conidial viability within the same formulation declined significantly with increases in temperature, irrespective of the surfactant. The optimal temperature for conidial germination of B. bassiana isolates was approximately 25 °C with an upper limit at 30 °C. Isolate 7320 was identified as the least affected by the different surfactants. This isolate was able to germinate rapidly in a broad temperature range of 25–30 °C after 24 h, this characteristic being an essential factor in controlling house fly populations in poultry houses.

  6. Evaluation of the mechanism of skin enhancing surfactants on the biomembrane of shed snake skin.

    Science.gov (United States)

    Wonglertnirant, Nanthida; Ngawhirunpat, Tanasait; Kumpugdee-Vollrath, Mont

    2012-01-01

    The aim of the present work was to investigate the effects of different surfactants at various concentrations as a skin penetration enhancer through the biomembrane of the shed skin of Naja kaouthia. Additionally, the enhancer mechanism(s) of each class of surfactants were evaluated using physical characterization techniques, such as scanning electron microscopy (SEM), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, and small and wide angle X-ray scattering (SWAXS). Our results showed that skin permeability increased with increasing concentrations of surfactants and the degree of increase was higher for the model hydrophilic permeant, deuterium dioxide (D(2)O), than the lipophilic permeant, ketoprofen (KP). Ionic surfactants, sodium lauryl sulfate (SLS) and cetyl trimethyl ammonium bromide (CTAB), demonstrated higher enhancement ability than the polyoxyethylene (20) sorbitan mono-oleate (Tween 80) non-ionic surfactant, which was consistent with the results from physical characterization studies. Increasing amounts of permeated drug resulted in an increase in membrane interactions. From our observations, it can be assumed that SLS and CTAB can be localized inside the biomembrane and thereby enhance drug permeation mainly through interactions with intercellular lipids in the stratum corneum (SC) and the creation of a perturbed microenvironment among lipid alkyl chains and polar head groups.

  7. [Strengthening Effects of Sodium Salts on Washing Kerosene Contaminated Soil with Surfactants].

    Science.gov (United States)

    Huang, Zhao-lu; Chen, Quan-yuan; Zhou, Juan; Xie, Mo-han

    2015-05-01

    The impact of sodium salt on kerosene contaminated soil washing with surfactants was investigated. The results indicated that sodium silicate greatly enhanced the washing efficiency of SDS. Sodium tartrate can largely enhance the washing efficiency of SDBS and Brij35. Sodium salts can enhance the washing efficiency on kerosene contaminated with TX-100. No significant differences were observed between different sodium salts. Sodium salt of humic acid and sodium silicate had similar enhancement on kerosene contaminated soil washing with saponin. Sodium humate can be a better choice since its application can also improve soil quality. The enhancement of sodium silicate on kerosene contaminated soil washing with Tw-80 increased with the increase of Tw-80 dosage. However, the impact of sodium chloride and sodium tartrate was opposite to sodium silicate. Sodium salts can reduce surface tension and critical micelle concentration of ionic surfactants to enhance the washing. Sodium salts can also reduce re-adsorption of oil to soil with nonionic surfactants to enhance the washing. Kerosene contamination can increase the contact angle of soil, which indicated the increase of hydrophilicity of soil. Washing with surfactants can reduce the hydrophilicitiy of soil according to contact angle measurement, which indicated that kerosene contaminated soil remediation with surfactant can also benefit nutrient and water transportation in the contaminated soil.

  8. Transport of biological molecules in surfactant-alginate composite hydrogels.

    Science.gov (United States)

    Stoppel, Whitney L; White, Joseph C; Horava, Sarena D; Bhatia, Surita R; Roberts, Susan C

    2011-11-01

    Obstructed transport of biological molecules can result in improper release of pharmaceuticals or biologics from biomedical devices. Recent studies have shown that nonionic surfactants, such as Pluronic® F68 (F68), positively alter biomaterial properties such as mesh size and microcapsule diameter. To further understand the effect of F68 (incorporated at concentrations well above the critical micelle concentration (CMC)) in traditional biomaterials, the transport properties of BSA and riboflavin were investigated in F68-alginate composite hydrogels, formed by both internal and external cross-linking with divalent cations. Results indicate that small molecule transport (represented by riboflavin) was not significantly hindered by F68 in homogeneously (internally) cross-linked hydrogels (up to an 11% decrease in loading capacity and 14% increase in effective diffusion coefficient, D(eff)), while protein transport in homogeneously cross-linked hydrogels (represented by BSA) was significantly affected (up to a 43% decrease in loading capacity and 40% increase in D(eff)). For inhomogeneously cross-linked hydrogels (externally cross-linked by CaCl(2) or BaCl(2)), the D(eff) increased up to 50 and 83% for small molecules and proteins, respectively. Variation in the alginate gelation method was shown to affect transport through measurable changes in swelling ratio (30% decrease) and observable changes in cross-linking structure as well as up to a 3.6- and 11.8-fold difference in D(eff) for riboflavin and BSA, respectively. Aside from the expected significant changes due to the cross-linking method utilized, protein transport properties were altered due to mesh size restrictions (10-25 nm estimated by mechanical properties) and BSA-F68 interaction (DLS). Taken as a whole, these results show that incorporation of a nonionic surfactant at concentrations above the CMC can affect device functionality by impeding the transport of large biological molecules. Copyright © 2011

  9. Performance of the Biocompatible Surfactant Tween 80, for the Formation of Microemulsions Suitable for New Pharmaceutical Processing

    Directory of Open Access Journals (Sweden)

    Cristina Prieto

    2013-01-01

    Full Text Available The aim of this work was to investigate the phase behaviour and the structure of the n-hexane/water emulsions based on a nonionic, nontoxic and biocompatible surfactant, Tween 80. This system is of interest for new pharmaceutical techniques based on supercritical fluids to form nano- and encapsulated particles. However, it showed a lack of stability denoted by large areas of macroemulsion. For this reason, the effect of additives (alcohols and brine and external variables (temperature were explored. The replacement of water by brine caused negligible impact due to the nonionic character of Tween 80. On the contrary, the presence of an alcohol (ethanol or 1-butanol enhanced the solubility of the surfactant in the oil phase and decreased the mixture viscosity, resulting in improved surface activity. Similar results were obtained by raising the temperature until the cloud point was reached (60°C. With these modifications, microemulsions at relatively low concentrations of surfactant (around 30% and within a broad interval of compositions could be obtained, widening their possible use in pharmaceuticals manufacturing (such as controlled drug delivery, enzymatic reactions, or excipient processing. The understanding of the surfactant performance could be further used to substitute the n-hexane by a greener solvent, such as supercritical CO2.

  10. MICROBIAL SURFACTANTS. I. GLYCOLIPIDS

    Directory of Open Access Journals (Sweden)

    Pirog T. Р.

    2014-02-01

    Full Text Available The review is devoted to surface-active glycolipids. The general characteristics, the physiological role of the rhamnolipids, trehalose lipids, sophorolipids, mannosylerythritol lipids and their traditional producers — the representatives of the genera Pseudozyma, Pseudomonas, Rhodococcus and Candida are given. The detailed analysis of the chemical structure, the stages of the biosynthesis and the regulation of some low molecular glycolipids are done. The own experimental data concerning the synthesis intensification, the physiological role and the practical use of Rhodococcus erythropolis IMV Ac-5017, Acinetobacter calcoaceticus IMV B-7241 and Nocardia vaccinii IMV B-7405 surfactants, which are a complex of the glyco-, phospho-, amino- and neutral lipids (glycolipids of all strains are presented by trehalose mycolates are summarized. It was found that R. erythropolis IMV Ac-5017, A. calcoaceticus IMV B-7241 and N. vaccinii IMV B-7405 surfactants have protective, antimicrobial and antiadhesive properties. It was shown that R. erythropolis IMV Ac-5017, A. calcoaceticus IMV B-7241 and N. vaccinii IMV B-7405 surfactants preparation of cultural liquid intensified the degradation of oil in water due to the activation of the natural petroleum-oxidizing microflora.

  11. Surfactants at the Design Limit.

    Science.gov (United States)

    Czajka, Adam; Hazell, Gavin; Eastoe, Julian

    2015-08-04

    This article analyzes how the individual structural elements of surfactant molecules affect surface properties, in particular, the point of reference defined by the limiting surface tension at the aqueous cmc, γcmc. Particular emphasis is given to how the chemical nature and structure of the hydrophobic tails influence γcmc. By comparing the three different classes of surfactants, fluorocarbon, silicone, and hydrocarbon, a generalized surface packing index is introduced which is independent of the chemical nature of the surfactants. This parameter ϕcmc represents the volume fraction of surfactant chain fragments in a surface film at the aqueous cmc. It is shown that ϕcmc is a useful index for understanding the limiting surface tension of surfactants and can be useful for designing new superefficient surfactants.

  12. Enantioselective Fluorination of Spirocyclic β-Prolinals Using Enamine Catalysis

    DEFF Research Database (Denmark)

    Fjelbye, Kasper; Marigo, Mauro; Clausen, Rasmus Prætorius

    2017-01-01

    A series of spirocyclic carbaldehydes were successfully fluorinated using enamine catalysis, furnishing the corresponding tertiary fluorides in both high yields and enantioselectivities. The fluorinated spirocycles provide a set of novel building blocks interesting from a medicinal chemistry point...

  13. Controlled Synthesis of Fluorinated Copolymers with Pendant Sulfonates

    DEFF Research Database (Denmark)

    Dimitrov, Ivaylo; Jankova Atanasova, Katja; Hvilsted, Søren

    2008-01-01

    Novel fluorinated copolymers of different architectures and bearing sulfopropyl groups were synthesized by atom transfer radical polymerization (ATRP) of aromatic fluorinated monomers and two modification reactions performed on the polymer chain - demethylation followed by sulfopropylation. As a ...

  14. Simple electrolytic cell for production of elemental fluorine

    International Nuclear Information System (INIS)

    Dides F, M.; Padilla S, U.

    1990-01-01

    It was constructed and tested a simple electrolytic cell for the production of elemental fluorine. The fluorine production is essential in the obtainment of uranium hexafluoride, a compound for the nuclear fuel cycle. (A.C.A.S.)

  15. Radiosyntheses using Fluorine-18: the Art and Science of Late Stage Fluorination

    Science.gov (United States)

    Cole, Erin L.; Stewart, Megan N.; Littich, Ryan; Hoareau, Raphael; Scott, Peter J. H.

    2014-01-01

    Positron (β+) emission tomography (PE) is a powerful, noninvasive tool for the in vivo, three-dimensional imaging of physiological structures and biochemical pathways. The continued growth of PET imaging relies on a corresponding increase in access to radiopharmaceuticals (biologically active molecules labeled with short-lived radionuclides such as fluorine-18). This unique need to incorporate the short-lived fluorine-18 atom (t1/2 = 109.77 min) as late in the synthetic pathway as possible has made development of methodologies that enable rapid and efficient late stage fluorination an area of research within its own right. In this review we describe strategies for radiolabeling with fluorine-18, including classical fluorine-18 radiochemistry and emerging techniques for late stage fluorination reactions, as well as labeling technologies such as microfluidics and solid-phase radiochemistry. The utility of fluorine-18 labeled radiopharmaceuticals is showcased through recent applications of PET imaging in the healthcare, personalized medicine and drug discovery settings. PMID:24484425

  16. The rare fluorinated natural products and biotechnological prospects for fluorine enzymology.

    Science.gov (United States)

    Chan, K K Jason; O'Hagan, David

    2012-01-01

    Nature has hardly evolved a biochemistry of fluorine although there is a low-level occurrence of fluoroacetate found in selected tropical and subtropical plants. This compound, which is generally produced in low concentrations, has been identified in the plants due to its high toxicity, although to date the biosynthesis of fluoroacetate in plants remains unknown. After that, fluorinated entities in nature are extremely rare, and despite increasingly sophisticated screening and analytical methods applied to natural product extraction, it has been 25 years since the last bona fide fluorinated natural product was identified from an organism. This was the reported isolation of the antibiotic 4-fluorothreonine and the toxin fluoroacetate in 1986 from Streptomyces cattleya. This bacterium has proven amenable to biochemical investigation, the fluorination enzyme (fluorinase) has been isolated and characterized, and the biosynthetic pathway to these bacterial metabolites has been elucidated. Also the fluorinase gene has been cloned into a host bacterium (Salinispora tropica), and this has enabled the de novo production of a bioactive fluorinated metabolite from fluoride ion, by genetic engineering. Biotechnological manipulation of the fluorinase offers the prospects for the assembly of novel fluorinated metabolites by fermentation technology. This is particularly attractive, given the backdrop that about 15-20% of pharmaceuticals licensed each year (new chemical entities) contain a fluorine atom. Copyright © 2012 Elsevier Inc. All rights reserved.

  17. Adsorption of ionic surfactants at microscopic air-water interfaces using the micropipette interfacial area-expansion method

    DEFF Research Database (Denmark)

    Kinoshita, Koji; Parra, Elisa; Needham, David

    2017-01-01

    The dynamic adsorption of ionic surfactants at air-water interfaces have been less-well studied than that of the simpler non-ionics since experimental limitations on dynamic surface tension (DST) measurements create inconsistencies in their kinetic analysis. Using our newly designed "Micropipette...... interfacial area-expansion method", we have measured and evaluated both equilibrium and dynamic adsorption of a well-known anionic surfactant, sodium dodecyl sulphate (SDS), in the absence or presence of 100mM NaCl. Our focus was to determine if and to what extent the inclusion of a new correction parameter...... for the "ideal ionic activity", A±i, can renormalize both equilibrium and dynamic surface tension measurements and provide better estimates of the diffusion coefficient of ionic surfactants in aqueous media obtained from electroneutral models, namely extended Frumkin isotherm and Ward-Tordai adsorption models...

  18. Partitioning of small amphiphiles at surfactant bilayer/water interfaces: an avoided level crossing muon spin resonance study.

    Science.gov (United States)

    Scheuermann, Robert; Tucker, Ian M; Dilger, Herbert; Staples, Ed J; Ford, Gary; Fraser, Stuart B; Beck, Bettina; Roduner, Emil

    2004-03-30

    The temperature-dependent variation of local environment and reorientation dynamics of the small amphiphile 2-phenylethanol in lamellar phase dispersions of the dichain cationic surfactants, 2,3-diheptadecyl ester ethoxypropyl-1,1,1-trimethylammonium chloride (DHTAC) and dioctadecyldimethylammonium chloride (DODMAC), and the nonionic surfactant, tetra(ethylene glycol) n-dodecyl ether (C12E4), have been determined using avoided level crossing muon spin resonance spectroscopy (ALC-muSR). For cosurfactant radicals the hydrophobic or hydrophilic character of the surrounding media can be determined from their magnetic resonance signatures. Comparison of the three different bilayer-forming surfactant systems shows that the ALC-muSR technique is able to distinguish both major and subtle differences in the partitioning of the cosurfactant radicals between the different systems.

  19. A Simple Two-Step Cloud Point Extraction Process for Removing Fluorescent Whitening Agents VBL in Industrial Wastewater and Recycling of Surfactant.

    Science.gov (United States)

    Han, Juan; Tang, Xu; Wang, Yun; Li, Jing; Ni, Liang; Wang, Lei

    2017-03-01

      With the enhancement of people's environmental consciousness, the treatment of wastewater was studied as the focus of this paper. Here we present a simple two-step extraction to realize efficient separation of fluorescent whitening agents VBL and cyclic utilization of surfactant to reduce the cost of wastewater treatment and environmental pollution. Firstly, the removal of VBL has been achieved by CPE using TX-114 as nonionic surfactant. The results showed that complete extraction was possible using 1% (w/w) TX-114 for VBL concentration not exceeding 17.5 mg/L, otherwise using a higher concentration of 1.5% (w/w) TX-114. Then the surfactant from the coacervate phase was recycled by changing the potential difference between phases. The morphology of micelles and solubilization mechanism of VBL were demonstrated through the observation of a fluorescent microscope. This method was successfully used to remove the VBL from wastewater sample and the surfactant could be reused several times.

  20. A small-angle X-ray scattering study of complexes formed in mixtures of a cationic polyelectrolyte and an anionic surfactant

    DEFF Research Database (Denmark)

    Bergström, M.; Kjellin, U.R.M.; Claesson, P.M.

    2002-01-01

    The internal structure of the solid phase formed in mixtures of the anionic surfactant sodium dodecyl sulfate (SDS) and a range of oppositely charged polyelectrolytes with different side chains and charge density has been investigated using small-angle X-ray scattering. Polyelectrolytes with short....... The hexagonal structure of MAPTAC is retained either when a neutral monomer (acrylamide, AM) is included in the polymer backbone to reduce the charge density or when a nonionic surfactant is admixed to the SDS/polyelctrolyte complex.. The unit cell length of AM-MAPTAC increases with decreasing charge density...... structure and the bilayers in the lamellar structure are based on self-assembled surfactant aggregates with the polyelectrolyte mainly located in the aqueous region adjacent to the charged surfactant headgroups....

  1. A study on the interaction of horse heart cytochrome c with some conventional and ionic liquid surfactants probed by ultraviolet-visible and fluorescence spectroscopic techniques.

    Science.gov (United States)

    Mondal, Satyajit; Das, Bijan

    2018-06-05

    The interactions of a protein cytochrome c with some selected conventional and ionic liquid surfactants have been investigated at pH7.4 using ultraviolet-visible and fluorescence spectroscopic techniques. We used four conventional surfactants - cetyltrimethylammonium bromide (CTAB), dodecyltrimethylammonium bromide (DTAB), sodium N-dodecanoylsarcosinate (SDDS), and N-decanoyl-N-methylglucamine (Mega 10), and a surface active ionic liquid 1-hexadecyl-3-methylimidazolium chloride (C 16 MeImCl). All the investigated surfactants were found to induce an unfolding of the protein cytochrome c. In presence of CTAB, SDDS and C 16 MeImCl, the heme iron atom was found to loose methionine from its axial position. Differential binding of the surfactant monomers and their micelles to the protein molecules was inferred. The ionic surfactants were found to be more effective than the nonionic one in unfolding the investigated protein. However, the extent of binding of CTAB/C 16 MeImCl to cytochrome c reaches a plateau past the critical micellization concentration (cmc) of the surfactant. For each of the cytochrome c-DTAB, cytochrome c-SDDS and cytochrome c-Mega 10 system, although there exists an inflection in the surfactant-binding, saturation point could not be detected. It has been demonstrated from the ultraviolet-visible spectral studies that the oxidation state of iron in cytochrome c does not change when the protein binds with the investigated surfactants. Copyright © 2018 Elsevier B.V. All rights reserved.

  2. Lunar mining of oxygen using fluorine

    Science.gov (United States)

    Burt, Donald M.

    1992-01-01

    An important aspect of lunar mining will be the extraction of volatiles, particularly oxygen, from lunar rocks. Thermodynamic data show that oxygen could readily be recovered by fluorination of abundant lunar anorthite, CaAl2Si2O8. Fluorine is the most reactive element, and the only reagent able to extract 100 percent of the oxygen from any mineral, yet it can safely be stored or reacted in nickel or iron containers. The general fluorination reaction, mineral + 2F2 = mixed fluorides = O2, has been used for more than 30 years at a laboratory scale by stable-isotope geochemists. For anorthite, metallic Al and Si may be recovered from the mixed fluorides by Na-reduction, and CaO via exchange with Na2O; the resulting NaF may be recycled into F2 and Na by electrolysis, using lanthanide-doped CaF2 as the inert anode.

  3. Fluorine geochemistry in volcanic rock series

    DEFF Research Database (Denmark)

    Stecher, Ole

    1998-01-01

    A new analytical procedure has been established in order to determine low fluorine concentrations (30–100 ppm F) in igneous rocks, and the method has also proven successful for higher concentrations (100–4000 ppm F). Fluorine has been measured in a series of olivine tholeiites from the Reykjanes...... Peninsula, a tholeiite to rhyolitic rock series from Kerlingarfjöll, central Iceland, and an alkaline rock series from Jan Mayen that ranges from ankaramites to trachytes. Fluorine is not appreciably degassed during extrusion and appears to be insensitive to slight weathering. The olivine tholeiites from...... the Reykjanes Peninsula have F contents of 30–300 ppm and exhibit linear increases proportional to the incompatible elements K, P, and Ti. Such incompatible behaviour for F has been confirmed for the less evolved rocks of the other series. The tholeiites from Kerlingarfjöll (100–2000 ppm F) show a linear...

  4. Formation mechanism of CdS nanoparticles with tunable luminescence via a non-ionic microemulsion route

    International Nuclear Information System (INIS)

    Angelescu, Daniel G.; Munteanu, Gabriel; Anghel, Dan F.; Peretz, Sandu; Maraloiu, Adrian V.; Teodorescu, Valentin S.

    2013-01-01

    We investigated the synthesis of CdS nanoparticles via an optimized water-in-oil microemulsion route that used the non-ionic surfactant-based system H 2 O–n-octane–Brij30/1-octanol. For that purpose, a microemulsion that contained Cd(II) ions (μe1) and another microemulsion that contained S 2− ions (μe2) were combined. To investigate the ways in which the non-ionic microemulsion characteristics controlled the size and emission properties of colloidal CdS quantum dots, μe1 and μe2 with tunable and robust similar structure were prepared. This requirement was fulfilled by matching the water emulsification failure boundary (wefb) of the two microemulsions and carrying out synthesis along this boundary. Dynamic light scattering and fluorescence probe techniques were used to investigate the size and interfacial organization of the microemulsion water droplets, and the CdS nanoparticles were characterized by UV–Vis and static fluorescence spectrometry, TEM and HRTEM. Nanoparticles of diameter 4.5–5.5 nm exhibiting enhanced band edge emission were produced by increasing the water content of the precursor microemulsions. The experimental results were combined with a Monte Carlo simulation approach to demonstrate that growth via coagulation of seed nuclei represented the driving mechanism for the CdS nanoparticle formation in the water-in-oil microemulsion.

  5. Formation mechanism of CdS nanoparticles with tunable luminescence via a non-ionic microemulsion route

    Energy Technology Data Exchange (ETDEWEB)

    Angelescu, Daniel G., E-mail: dangelescu@hotmail.com; Munteanu, Gabriel [Quantum Chemistry and Molecular Structure Laboratory, Romanian Academy, ' Ilie Murgulescu' Institute of Physical Chemistry (Romania); Anghel, Dan F.; Peretz, Sandu [Romanian Academy, ' Ilie Murgulescu' Institute of Physical Chemistry, Colloidal Laboratory (Romania); Maraloiu, Adrian V.; Teodorescu, Valentin S. [National Institute of Materials Physics, Institute of Atomic Physics (Romania)

    2013-01-15

    We investigated the synthesis of CdS nanoparticles via an optimized water-in-oil microemulsion route that used the non-ionic surfactant-based system H{sub 2}O-n-octane-Brij30/1-octanol. For that purpose, a microemulsion that contained Cd(II) ions ({mu}e1) and another microemulsion that contained S{sup 2-} ions ({mu}e2) were combined. To investigate the ways in which the non-ionic microemulsion characteristics controlled the size and emission properties of colloidal CdS quantum dots, {mu}e1 and {mu}e2 with tunable and robust similar structure were prepared. This requirement was fulfilled by matching the water emulsification failure boundary (wefb) of the two microemulsions and carrying out synthesis along this boundary. Dynamic light scattering and fluorescence probe techniques were used to investigate the size and interfacial organization of the microemulsion water droplets, and the CdS nanoparticles were characterized by UV-Vis and static fluorescence spectrometry, TEM and HRTEM. Nanoparticles of diameter 4.5-5.5 nm exhibiting enhanced band edge emission were produced by increasing the water content of the precursor microemulsions. The experimental results were combined with a Monte Carlo simulation approach to demonstrate that growth via coagulation of seed nuclei represented the driving mechanism for the CdS nanoparticle formation in the water-in-oil microemulsion.

  6. Surfactants as microbicides and contraceptive agents: a systematic in vitro study.

    Directory of Open Access Journals (Sweden)

    Otilia V Vieira

    Full Text Available BACKGROUND: The urgent need for cheap and easy-to-use protection against both unwanted pregnancies and sexually transmitted diseases has stimulated considerable interest in the use of surfactants as microbicides, anti-viral, and contraceptive agents in recent years. In the present study we report a systematic in vitro evaluation of the microbicidal, anti-viral and contraceptive potential of cationic, anionic, zwitterionic, and non-ionic surfactants. METHODOLOGY/PRINCIPAL FINDINGS: Toxicity was evaluated in mammalian columnar epithelial (MDCK cells, human sperm cells, Candida albicans, Escherichia coli, Pseudomonas aeruginosa, Neisseria gonorrhoeae, Streptococcus agalactiae and Enterococcus faecalis. The inhibition of adenovirus and lentivirus infection of MDCK cells was also tested. A homologous series of cationic surfactants, alkyl-N,N,N-trimethylammonium bromides (C(nTAB, with varying alkyl chains were shown to be bactericidal and fungicidal at doses that were related to the surfactant critical micelle concentrations (CMC, all of them at concentrations significantly below the CMC. In general, bacteria were more susceptible to this surfactant group than C. albicans and this organism, in turn, was more susceptible than MDCK cells. This suggests that the C(nTAB may be useful as vaginal disinfectants only in so far as bacterial and fungal infections are concerned. None of the surfactants examined, including those that have been used in pre-clinical studies, showed inhibition of adenovirus or lentivirus infection of MDCK cells or spermicidal activity at doses that were sub-toxic to MDCK cells. CONCLUSIONS/SIGNIFICANCE: The results of this study lead us to propose that systematic analysis of surfactant toxicity, such as we report in the present work, be made a mandatory pre-condition for the use of these substances in pre-clinical animal and/or human studies.

  7. 21 CFR 170.45 - Fluorine-containing compounds.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Fluorine-containing compounds. 170.45 Section 170... § 170.45 Fluorine-containing compounds. The Commissioner of Food and Drugs has concluded that it is in the interest of the public health to limit the addition of fluorine compounds to foods (a) to that...

  8. Fluorine photochemistry in the stratosphere. [effect on ozone

    Science.gov (United States)

    Stolarski, R. S.; Rundel, R. D.

    1975-01-01

    The photochemistry of fluorine in the stratosphere is surveyed in order to estimate the effect on ozone of fluorine atoms released by the breakdown of chlorofluoromethanes. The catalytic efficiency for ozone destruction by fluorine is found to be less than .0001 that of chlorine in the altitude range from 25 to 50 km.

  9. Fluorinated Polyurethane Scaffolds for 19F Magnetic Resonance Imaging

    NARCIS (Netherlands)

    Lammers, Twan; Mertens, Marianne E.; Schuster, Philipp; Rahimi, Khosrow; Shi, Yang; Schulz, Volkmar; Kuehne, Alexander J.C.; Jockenhoevel, Stefan; Kiessling, Fabian

    2017-01-01

    Researchers used fluorinated polyurethane scaffolds for 19F magnetic resonance imaging. They generated a novel fluorinated polymer based on thermoplastic polyurethane (19F -TPU) which possesses distinct properties rendering it suitable for fluorine-based MRI. The 19F -TPU is synthesized from a

  10. Fluorination of some highly functionalized cycloalkanes: chemoselectivity and substrate dependence.

    Science.gov (United States)

    Remete, Attila Márió; Nonn, Melinda; Fustero, Santos; Haukka, Matti; Fülöp, Ferenc; Kiss, Loránd

    2017-01-01

    A study exploring the chemical behavior of some dihydroxylated β-amino ester stereo- and regioisomers, derived from unsaturated cyclic β-amino acids is described. The nucleophilic fluorinations involving hydroxy-fluorine exchange of some highly functionalized alicyclic diol derivatives have been carried out in view of selective fluorination, investigating substrate dependence, neighboring group assistance and chemodifferentiation.

  11. Fluorination of some highly functionalized cycloalkanes: chemoselectivity and substrate dependence

    Directory of Open Access Journals (Sweden)

    Attila Márió Remete

    2017-11-01

    Full Text Available A study exploring the chemical behavior of some dihydroxylated β-amino ester stereo- and regioisomers, derived from unsaturated cyclic β-amino acids is described. The nucleophilic fluorinations involving hydroxy–fluorine exchange of some highly functionalized alicyclic diol derivatives have been carried out in view of selective fluorination, investigating substrate dependence, neighboring group assistance and chemodifferentiation.

  12. Total Testosterone, Cortizol, Growth hormone and Fluorine Levels in Fluorine Intoxicated Rabbits

    OpenAIRE

    AKDOĞAN, Mehmet

    2001-01-01

    In this study, the effects of fluorine given subchronically (70 days) in drinking water (1, 10, 40 mg/L) were assessed in New Zealand male rabbits and their effects on total testosterone, cortisol and growth hormone (GH) levels were determined. Blood samples were taken from control and experimental groups after 0, 21 and 70 days and total testosterone, cortisol, GH and fluorine levels were measured. As a result, in animals given 10 mg/L fluorinated water, on the 21st day there was a statistic...

  13. Dating of archaeological flints by fluorine depth profiling: new insights into the mechanism of fluorine uptake

    International Nuclear Information System (INIS)

    Walter, P.; Menu, M.; Dran, J.C.

    1992-01-01

    To understand the mechanism underlying fluorination of buried archaeological flints, samples of amorphous silica have been subjected to fluorine incorporation either by aqueous treatment or by ion implantation. The nuclear reaction analysis technique using the resonant 19 F(p, αγ) 16 O reaction at 872 keV has been used to obtain profiles of fluorine with an automated electrostatic energy scanning system. Our results emphasize the role of defects for F uptake and allow us to propose a tentative mechanism for F diffusion. The use of synthetic hydrated silica appears promising to simulate the geochemical weathering of chalcedony. (orig.)

  14. Does fluorine participate in halogen bonding?

    Science.gov (United States)

    Eskandari, Kiamars; Lesani, Mina

    2015-03-16

    When R is sufficiently electron withdrawing, the fluorine in the R-F molecules could interact with electron donors (e.g., ammonia) and form a noncovalent bond (F⋅⋅⋅N). Although these interactions are usually categorized as halogen bonding, our studies show that there are fundamental differences between these interactions and halogen bonds. Although the anisotropic distribution of electronic charge around a halogen is responsible for halogen bond formations, the electronic charge around the fluorine in these molecules is spherical. According to source function analysis, F is the sink of electron density at the F⋅⋅⋅N BCP, whereas other halogens are the source. In contrast to halogen bonds, the F⋅⋅⋅N interactions cannot be regarded as lump-hole interactions; there is no hole in the valence shell charge concentration (VSCC) of fluorine. Although the quadruple moment of Cl and Br is mainly responsible for the existence of σ-holes, it is negligibly small in the fluorine. Here, the atomic dipole moment of F plays a stabilizing role in the formation of F⋅⋅⋅N bonds. Interacting quantum atoms (IQA) analysis indicates that the interaction between halogen and nitrogen in the halogen bonds is attractive, whereas it is repulsive in the F⋅⋅⋅N interactions. Virial-based atomic energies show that the fluorine, in contrast to Cl and Br, stabilize upon complex formation. According to these differences, it seems that the F⋅⋅⋅N interactions should be referred to as "fluorine bond" instead of halogen bond. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Surfactant phosphatidylcholine metabolism and surfactant function in preterm, ventilated lambs

    International Nuclear Information System (INIS)

    Jobe, A.H.; Ikegami, M.; Seidner, S.R.; Pettenazzo, A.; Ruffini, L.

    1989-01-01

    Preterm lambs were delivered at 138 days gestational age and ventilated for periods up to 24 h in order to study surfactant metabolism and surfactant function. The surfactant-saturated phosphatidylcholine pool in the alveolar wash was 13 +/- 4 mumol/kg and did not change from 10 min to 24 h after birth. Trace amounts of labeled natural sheep surfactant were mixed with fetal lung fluid at birth. By 24 h, 80% of the label had become lung-tissue-associated, yet there was no loss of label from phosphatidylcholine in the lungs when calculated as the sum of the lung tissue plus alveolar wash. De novo synthesized phosphatidylcholine was labeled with choline given by intravascular injection at 1 h of age. Labeled phosphatidylcholine accumulated in the lung tissue linearly to 24 h, and the labeled phosphatidylcholine moved through lamellar body to alveolar pools. The turnover time for alveolar phosphatidylcholine was estimated to be about 13 h, indicating an active metabolic pool. A less surface-active surfactant fraction recovered as a supernatant after centrifugation of the alveolar washes at 40,000 x g increased from birth to 10 min of ventilation, but no subsequent changes in the distribution of surfactant phosphatidylcholine in surfactant fractions occurred. The results were consistent with recycling pathway(s) that maintained surface-active surfactant pools in preterm ventilated lambs

  16. Competitive adsorption from mixed hen egg-white lysozyme/surfactant solutions at the air-water interface studied by tensiometry, ellipsometry, and surface dilational rheology.

    Science.gov (United States)

    Alahverdjieva, V S; Grigoriev, D O; Fainerman, V B; Aksenenko, E V; Miller, R; Möhwald, H

    2008-02-21

    The competitive adsorption at the air-water interface from mixed adsorption layers of hen egg-white lysozyme with a non-ionic surfactant (C10DMPO) was studied and compared to the mixture with an ionic surfactant (SDS) using bubble and drop shape analysis tensiometry, ellipsometry, and surface dilational rheology. The set of equilibrium and kinetic data of the mixed solutions is described by a thermodynamic model developed recently. The theoretical description of the mixed system is based on the model parameters for the individual components.

  17. Energetics of defects on graphene through fluorination.

    Science.gov (United States)

    Xiao, Jie; Meduri, Praveen; Chen, Honghao; Wang, Zhiguo; Gao, Fei; Hu, Jianzhi; Feng, Ju; Hu, Mary; Dai, Sheng; Brown, Suree; Adcock, Jamie L; Deng, Zhiqun; Liu, Jun; Graff, Gordon L; Aksay, Ilhan A; Zhang, Ji-Guang

    2014-05-01

    Functionalized graphene sheets (FGSs) comprise a unique member of the carbon family, demonstrating excellent electrical conductivity and mechanical strength. However, the detailed chemical composition of this material is still unclear. Herein, we take advantage of the fluorination process to semiquantitatively probe the defects and functional groups on graphene surface. Functionalized graphene sheets are used as substrate for low-temperature (DFT) and quantified experimentally by nuclear magnetic resonance (NMR). The electrochemical properties of fluorinated graphene are also discussed extending the use of graphene from fundamental research to practical applications. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Fluorinated Amine Stereotriads via Allene Amination.

    Science.gov (United States)

    Liu, Lu; Gerstner, Nels C; Oxtoby, Lucas J; Guzei, Ilia A; Schomaker, Jennifer M

    2017-06-16

    The incorporation of fluorine into organic scaffolds often improves the bioactivity of pharmaceutically relevant compounds. C-F/C-N/C-O stereotriad motifs are prevalent in antivirals, neuraminidase inhibitors, and modulators of androgen receptors, but are challenging to install. An oxidative allene amination strategy using Selectfluor rapidly delivers triply functionalized triads of the form C-F/C-N/C-O, exhibiting good scope and diastereoselectivity for all syn products. The resulting stereotriads are readily transformed into fluorinated pyrrolidines and protected α-, β-, and γ-amino acids.

  19. Lunar mining of oxygen using fluorine

    Science.gov (United States)

    Burt, Donald M.; Tyburczy, James A.; Roberts, Jeffery J.; Balasubramanian, Rajan

    1992-01-01

    Experiments during the first year of the project were directed towards generating elemental fluorine via the electrolysis of anhydrous molten fluorides. Na2SiF6 was dissolved in either molten NaBF4 or a eutectic (minimum-melting) mixture of KF-LiF-NaF and electrolyzed between 450 and 600 C to Si metal at the cathode and F2 gas at the anode. Ar gas was continuously passed through the system and F2 was trapped in a KBr furnace. Various anode and cathode materials were investigated. Despite many experimental difficulties, the capability of the process to produce elemental fluorine was demonstrated.

  20. Evaluation of some vanillin-modified polyoxyethylene surfactants as additives for water based mud

    Directory of Open Access Journals (Sweden)

    M.M.A. El-Sukkary

    2014-03-01

    Full Text Available Water-based drilling fluids are increasingly being used for oil and gas exploration and are generally considered to be more environmentally acceptable than oil-based or synthetic-based fluids. In this study, new types of vanillin-modified polyoxyethylene surfactants were evaluated as additives in water-based mud. Their rheological properties in water-based mud were investigated which included the apparent viscosity, the plastic viscosity, the yield point, the gel strength, the thixotropy as well as the filtration properties. Also, the effect of high temperature on the rheology of the formulated water based mud was studied. The tested ethoxylated non-ionic surfactants showed good results when utilized in the formulation of water-based mud.

  1. Aggregation of Non Ionic Surfactant Igepal in Aqueous Solution: Fluorescence and Light Scattering Studies

    Directory of Open Access Journals (Sweden)

    Subhash Ch. Bhattacharya

    2003-10-01

    Full Text Available Abstract: The association of the polyoxyethylene nonyl phenol (Igepal in aqueous solution has been studied. The results of the fluorescence quenching of 1-Anthracene sulphonate and Safranine T in nonionic micellar solution of Igepal have been presented. The quenching process was exploited to estimate the aggregation number of surfactant monomer. In the Igepal series the micellar aggregation number systematically varied. From the dynamic light scattering studies in micellar solution the polydispersity of the medium and the diameter of the micelles have been determined. The diameters of the micelles have been increased with increase in the molar mass of surfactants. A reasonable estimation of the surface area of the head group in different micelles has been attempted.

  2. Polyoxyethylene alkyl ether carboxylic acids: An overview of a neglected class of surfactants with multiresponsive properties.

    Science.gov (United States)

    Chiappisi, Leonardo

    2017-12-01

    In this work, an overview on aqueous solutions of polyoxyethylene alkyl ether carboxylic acids is given. Unique properties arise from the combination of the nonionic, temperature-responsive polyoxyethylene block with the weakly ionic, pH-responsive carboxylic acid termination in a single surfactant headgroup. Accordingly, this class of surfactant finds broad application across very different sectors. Despite their large use on an industrial and a technical scale, the literature lacks a systematic and detailed characterization of their physico-chemical properties which is provided herein. In addition, a comprehensive overview is given of their self-assembly and interfacial behavior, of their use as colloidal building blocks and for large-scale applications. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. Effect of the fluorination technique on the surface-fluorination patterning of double-walled carbon nanotubes

    Directory of Open Access Journals (Sweden)

    Lyubov G. Bulusheva

    2017-08-01

    Full Text Available Double-walled carbon nanotubes (DWCNTs are fluorinated using (1 fluorine F2 at 200 °C, (2 gaseous BrF3 at room temperature, and (3 CF4 radio-frequency plasma functionalization. These have been comparatively studied using transmission electron microscopy and infrared, Raman, X-ray photoelectron, and near-edge X-ray absorption fine structure (NEXAFS spectroscopy. A formation of covalent C–F bonds and a considerable reduction in the intensity of radial breathing modes from the outer shells of DWCNTs are observed for all samples. Differences in the electronic state of fluorine and the C–F vibrations for three kinds of the fluorinated DWCNTs are attributed to distinct local surroundings of the attached fluorine atoms. Possible fluorine patterns realized through a certain fluorination technique are revealed from comparison of experimental NEXAFS F K-edge spectra with quantum-chemical calculations of various models. It is proposed that fluorination with F2 and BrF3 produces small fully fluorinated areas and short fluorinated chains, respectively, while the treatment with CF4 plasma results in various attached species, including single or paired fluorine atoms and –CF3 groups. The results demonstrate a possibility of different patterning of carbon surfaces through choosing the fluorination method.

  4. Tunable Nanoparticulate Scaffolds from Self assembly in Surfactant Mesophase

    Science.gov (United States)

    Sharma, K. P.; Guruswamy, K.; Mondain-Monval, O.; Aswal, V. K.

    2010-03-01

    We examine the organization of silica nanoparticles in non-ionic surfactant, C12E9/water, H1 phase. We show, using SAXS, TEM , Freeze Fracture and Microscopy, that particles with sizes smaller than the mesophase characteristic size, a, template the mesophase; particles with size ˜ a, partition into a dispersed phase and into strand-like aggregates. Particles of size > a phase separate to form particulate strands organized into a scaffold. The particulate network forms by expulsion of particles from growing H1 phase domains; particles are concentrated in the isotropic phase and jam at domain boundaries. Changing the cooling rate into the H1 phase changes the nucleation of domains -- hence providing a route to tune the network mesh size. When the surfactant is heated to the micellar phase, the particles redisperse readily. SANS confirms that C12E9 forms a bilayer on the silica particles, preventing their irreversible aggregation. PEI coated particles (with size >a) also phase separate to form networks. The network of such coated particles can be crosslinked to obtain a free standing nanoparticulate scaffold.

  5. Fluorine and Fluorinated Motifs in the Design and Application of Bioisosteres for Drug Design.

    Science.gov (United States)

    Meanwell, Nicholas A

    2018-02-05

    The electronic properties and relatively small size of fluorine endow it with considerable versatility as a bioisostere and it has found application as a substitute for lone pairs of electrons, the hydrogen atom, and the methyl group while also acting as a functional mimetic of the carbonyl, carbinol, and nitrile moieties. In this context, fluorine substitution can influence the potency, conformation, metabolism, membrane permeability, and P-gp recognition of a molecule and temper inhibition of the hERG channel by basic amines. However, as a consequence of the unique properties of fluorine, it features prominently in the design of higher order structural metaphors that are more esoteric in their conception and which reflect a more sophisticated molecular construction that broadens biological mimesis. In this Perspective, applications of fluorine in the construction of bioisosteric elements designed to enhance the in vitro and in vivo properties of a molecule are summarized.

  6. ADSORPTION OF SURFACTANT ON CLAYS

    Science.gov (United States)

    Surfactants used to enhance remediation of soils by soil washing are often lost in the process. Neither the amount nor the cause of this loss is known. It is assumed that clays present in the soil are responsible for the loss of the surfactant. In this papere, adsorption prope...

  7. Surfactant monitoring by foam generation

    Science.gov (United States)

    Mullen, Ken I.

    1997-01-01

    A device for monitoring the presence or absence of active surfactant or other surface active agents in a solution or flowing stream based on the formation of foam or bubbles is presented. The device detects the formation of foam with a light beam or conductivity measurement. The height or density of the foam can be correlated to the concentration of the active surfactant present.

  8. Study on behavior of fluorine-18 in tilapia

    International Nuclear Information System (INIS)

    He Xinruo; Fan Guangyu; Bai Suozhen; Diao Guoping; Dong Guizhi; Zhang Weiqin

    1986-01-01

    The metabolism of fluorine in Tilapia was investigated by using fluorine-18 as tracer. For Tilapia, the fluorine was taken from water by digestive system, gills and skin, then spread to whole body. The amount of fluorine-18 accumulated in various tissues of Tilapia is considerably different. The highest is in the scale. The lowest is in the muscle and fat. The middle is in the liver, kidney and heart. The excretion of fluorine-18 is released into water body by kidney, gills and skin. The more it was taken, the more it was released

  9. Protection criteria from the non-ionizing radiations

    International Nuclear Information System (INIS)

    Touzet, Rodolfo E.

    2004-01-01

    The first objective of the protection philosophy is to determinate the relation reason-effect in order to establish the exposition thresholds to acceptable values. To establish the radioprotection criteria is important to considerate the following: a-) The damage and effects of the non-ionizing radiation; b-) The physical aspects of the fields exposition; and c-) The dosimetry of the involucrate tissues. The non-ionizing radiation includes the optics radiations (ultraviolet, visible, infrared and laser), and the electromagnetic radiations (microwave, radars, magnetic and electrostatics fields)

  10. Properties of surfactant films in water-in-CO2 microemulsions obtained by small-angle neutron scattering.

    Science.gov (United States)

    Yan, Ci; Sagisaka, Masanobu; James, Craig; Rogers, Sarah; Alexander, Shirin; Eastoe, Julian

    2014-12-01

    The formation, stability and structural properties of normal liquid phase microemulsions, stabilized by hydrocarbon surfactants, comprising water and hydrocarbon oils can be interpreted in terms of the film bending rigidity (energy) model. Here, this model is tested for unusual water-in-CO2 (w/c) microemulsions, formed at high pressure with supercritical CO2 (sc-CO2) as a solvent and fluorinated surfactants as stabilizers. Hence, it is possible to explore the generality of this model for other types of microemulsions. High Pressure Small-Angle Neutron Scattering (HP-SANS) has been used to study w/c microemulsions, using contrast variation to highlight scattering from the stabilizing fluorinated surfactant films: these data show clear evidence for spherical core-shell structures for the microemulsion droplets. The results extend understanding of w/c microemulsions since previous SANS studies are based only on scattering from water core droplets. Here, detailed structural parameters for the surfactant films, such as thickness and film bending energy, have been extracted from the core-shell SANS profiles revealed by controlled contrast variation. Furthermore, at reduced CO2 densities (∼0.7gcm(-3)), elongated cylindrical droplet structures have been observed, which are uncommon for CO2 microemulsions/emulsions. The implications of the presence of cylindrical micelles and droplets for applications of CO2, and viscosity enhancements are discussed. Copyright © 2014 Elsevier Inc. All rights reserved.

  11. Fluorine effect on pericyclic and pseudopericyclic processes ...

    Indian Academy of Sciences (India)

    Administrator

    corresponds to a borderline case; 2-pyranol (3) and pyran (5) and 6-fluoro pyran (6) reactions are clearly pericyclic in character. Correspondingly pseudeopericyclic reactions show up orbital disconnections and fluorine delays the occurrence of orbital disconnections on the reaction trajectory. Keywords. Pericyclic reaction ...

  12. Synthesis of nanocrystalline fluorinated hydroxyapatite by ...

    Indian Academy of Sciences (India)

    Fluorinated hydroxyapatite, (FHA, Ca10(PO4)6(OH)2-F), possesses higher corrosion resistance in biofluids than pure HA and reduces the risk of dental caries. The present work deals with the synthesis of nanocrystalline FHAs by microwave processing. The crystal size and morphology of the nanopowders were ...

  13. Fluorine effect on pericyclic and pseudopericyclic processes ...

    Indian Academy of Sciences (India)

    ... (reaction 4) corresponds to a borderline case; 2-pyranol (3) and pyran (5) and 6-fluoro pyran (6) reactions are clearly pericyclic in character. Correspondingly pseudeopericyclic reactions show up orbital disconnections and fluorine delays the occurrence of orbital disconnections on the reaction trajectory.

  14. Partially fluorinated electrospun proton exchange membranes

    DEFF Research Database (Denmark)

    2016-01-01

    or in a filter. The porous membrane layer comprises a plurality of randomly oriented fibers manufactured by electrospinning, wherein the fibers comprise a graft copolymer, wherein the graft copolymer comprises a backbone and at least one side chain, wherein the backbone comprises a partially fluorinated...

  15. Decomposition of Fluorinated Graphene under Heat Treatment

    Czech Academy of Sciences Publication Activity Database

    Plšek, Jan; Drogowska, Karolina; Valeš, Václav; Ek Weis, Johan; Kalbáč, Martin

    2016-01-01

    Roč. 22, č. 26 (2016), s. 8990-8997 ISSN 1521-3765 R&D Projects: GA ČR(CZ) GAP208/12/1062 Institutional support: RVO:61388955 Keywords : fluorination * graphene * photoelectron spectroscopy Subject RIV: CF - Physical ; Theoretical Chemistry

  16. Study on radiation chemistry of fluorinated polymers for EUV resist

    Science.gov (United States)

    Nomura, Naoya; Okamoto, Kazumasa; Yamamoto, Hiroki; Kozawa, Takahiro; Fujiyoshi, Ryoko; Umegaki, Kikuo

    2015-06-01

    The fluorination of a chemically amplified resist is an effective method for use in EUV lithography. However, it has been suggested that the fluorination of the base polymer of the chemically amplified resist induces the electron scavenging reaction by the base polymer and reduces the acid yield. In this study, we clarified the formation of transient species and the acid yields of fluorinated polymers after exposure to the ionizing radiations. The acid yields of fluorinated polymers with hydroxyl groups were lower than that of poly(4-hydroxystyrene) (PHS). The lower acid generation efficiency in fluorinated polymers was due to not only the reaction between fluorinated polymers and electrons but also the lower deprotonation efficiency of the radical cation of the fluorinated polymer.

  17. Fluorine compounds for doping conductive oxide thin films

    Science.gov (United States)

    Gessert, Tim; Li, Xiaonan; Barnes, Teresa M; Torres, Jr., Robert; Wyse, Carrie L

    2013-04-23

    Methods of forming a conductive fluorine-doped metal oxide layer on a substrate by chemical vapor deposition are described. The methods may include heating the substrate in a processing chamber, and introducing a metal-containing precursor and a fluorine-containing precursor to the processing chamber. The methods may also include adding an oxygen-containing precursor to the processing chamber. The precursors are reacted to deposit the fluorine-doped metal oxide layer on the substrate. Methods may also include forming the conductive fluorine-doped metal oxide layer by plasma-assisted chemical vapor deposition. These methods may include providing the substrate in a processing chamber, and introducing a metal-containing precursor, and a fluorine-containing precursor to the processing chamber. A plasma may be formed that includes species from the metal-containing precursor and the fluorine-containing precursor. The species may react to deposit the fluorine-doped metal oxide layer on the substrate.

  18. Influence of Surfactant Structure on the Stability of Water-in-Oil Emulsions under High-Temperature High-Salinity Conditions

    Directory of Open Access Journals (Sweden)

    Abdelhalim I. A. Mohamed

    2017-01-01

    Full Text Available Emulsified water-in-oil (W/O systems are extensively used in the oil industry for water control and acid stimulation. Emulsifiers are commonly utilized to emulsify a water-soluble material to form W/O emulsion. The selection of a particular surfactant for such jobs is critical and certainly expensive. In this work, the impact of surfactant structure on the stability of W/O emulsions is investigated using the hydrophilic-lipophilic balance (HLB of the surfactant. Different commercial surfactants were evaluated for use as emulsifiers for W/O systems at high-temperature (up to 120°C high-salinity (221,673 ppm HTHS conditions. Diverse surfactants were examined including ethoxylates, polyethylene glycols, fluorinated surfactants, and amides. Both commercial Diesel and waste oil are used for the oleic phase to prepare the emulsified system. Waste oil has shown higher stability (less separation in comparison with Diesel. This work has successfully identified stable emulsified W/O systems that can tolerate HTHS environments using HLB approach. Amine Acetate family shows higher stability in comparison with Glycol Ether family and at even lower concentration. New insights into structure-surfactant stability relationship, beyond the HLB approach, are provided for surfactant selection.

  19. Deciphering the Fluorine Code-The Many Hats Fluorine Wears in a Protein Environment.

    Science.gov (United States)

    Berger, Allison Ann; Völler, Jan-Stefan; Budisa, Nediljko; Koksch, Beate

    2017-09-19

    Deciphering the fluorine code is how we describe not only the focus of this Account, but also the systematic approach to studying the impact of fluorine's incorporation on the properties of peptides and proteins used by our groups and others. The introduction of fluorine has been shown to impart favorable, but seldom predictable, properties to peptides and proteins, but up until about two decades ago the outcomes of fluorine modification of peptides and proteins were largely left to chance. Driven by the motivation to extend the application of the unique properties of the element fluorine from medicinal and agro chemistry to peptide and protein engineering we have established extensive research programs that enable the systematic investigation of effects that accompany the introduction of fluorine into this class of biopolymers. The introduction of fluorine into amino acids offers a universe of options for modifications with regard to number and position of fluorine substituents in the amino acid side chain. Moreover, it is important to emphasize that the consequences of incorporating the C-F bond into a biopolymer can be attributed to two distinct yet related phenomena: (i) the fluorine substituent can directly engage in intermolecular interactions with its environment and/or (ii) the other functional groups present in the molecule can be influenced by the electron withdrawing nature of this element (intramolecular) and in turn interact differently with their immediate environment (intermolecular). Based on our studies, we have shown that a change in number and/or position of as subtle as one single fluorine substituent has the power to considerably modify key properties of amino acids such as hydrophobicity, polarity, and secondary structure propensity. These properties are crucial factors in peptide and protein engineering, and thus, fluorinated amino acids can be applied to fine-tune properties such as protein folding, proteolytic stability, and protein

  20. Inverted Micelle-in-Micelle Configuration in Cationic/Carbohydrate Surfactant Mixtures.

    Science.gov (United States)

    Das, Saikat; Xu, Wenjin; Lehmler, Hans-Joachim; Miller, Anne-Frances; Knutson, Barbara L; Rankin, Stephen E

    2017-01-04

    Nuclear magnetic resonance is applied to investigate the relative positions and interactions between cationic and non-ionic carbohydrate-based surfactants in mixed micelles with D 2 O as the solvent. This is accomplished by using relaxation measurements [spin-lattice (T 1 ) and spin-spin (T 2 ) analysis] and nuclear Overhauser effect spectroscopy (NOESY). This study focuses on the interactions of n-octyl β-d-glucopyranoside (C8G1) and β-d-xylopyranoside (C8X1) with the cationic surfactant hexadecyltrimethylammonium bromide (C 16 TAB). Whereas the interactions between carbohydrate and cationic surfactants are thermodynamically favorable, the NOESY results suggest that both of the sugar head groups are located preferentially at the interior core of the mixed micelles, so that they are not directly exposed to the bulk solution. The more hydrophilic sugar headgroups of C8G1 have more mobility than sugar heads of C8X1 owing to increased hydration. Herein, an inverted carbohydrate configuration in mixed micelles is proposed for the first time and supported by fluorescence spectroscopy experiments. This inverted carbohydrate headgroup configuration would limit the use of these mixed surfactants when access to the carbohydrate headgroup is important, but may present new opportunities where the carbohydrate-rich core of the micelles can be exploited. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Optimizing the surfactant for the aqueous processing of LiFePO{sub 4} composite electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Porcher, W.; Jouanneau, S. [Commissariat a l' Energie Atomique, 38054 Grenoble Cedex 9 (France); Lestriez, B.; Guyomard, D. [Institut des Materiaux Jean Rouxel (IMN), Universite de Nantes, CNRS, 44322 Nantes Cedex 3 (France)

    2010-05-01

    Aqueous processing would reduce the costs associated with the making of the composite electrode. To achieve the incorporation and the dispersion of the carbon black (CB) conductive agent in aqueous slurries, a surfactant is needed. In this paper, three surfactants are compared, an anionic one, the sodium dodecyle sulphate (SDS), a non-ionic one, the isooctylphenylether of polyoxyethylene called commercially Triton X-100 and a cationic one, the hexadecyltrimethylammonium bromide (CTAB), by using rheology and laser granulometry measurements on electrode slurries on one hand, and SEM observations, porosity and adhesion measurements and electrochemical testing on composite electrodes on the other hand. Ionic surfactants were found to be not suitable because a corrosion of the aluminium current collector occurred. The utilization of Triton X-100 favoured a more homogeneous CB distribution, resulted in a better electronic wiring of the active material particles and higher rate behavior of the electrode. Optimal electrochemical performances are obtained for an optimal surfactant concentration which depends on the BET surface area of the CB powder. (author)

  2. "The effects of polysorbate surfactants on the structure of mucus Glycoproteins "

    Directory of Open Access Journals (Sweden)

    Sajadi Tabassi A

    2001-07-01

    Full Text Available A dynamic oscillatory technique was used to assess the effect of polysorbate non-ionic surfactants on mucus rheology. Adherent mucus gel was scraped from the surface mucosa of pig stomachs and purified by gel exclusion chromatography followed by ultrafiltration and gelation. Rheological measurements of this gel were carried out on a Carri-Med Controlled Stress Rheometer. Appropriate volumes of surfactant solution were added to weighed samples of mucus gel so that a final concentration of 20 mM surfactant was achieved in a gel containing 8% w/w solids content. Polysorbate 20 (PS20, polysorbate 40 (PS40, polysorbate 60 (PS60 and polysorbate 80 (PS80 all decreased both storage (elastic modulus G’ and loss (viscous modulus G’’ significantly at 10 Hz (PPS20>PS60>PS40. The mechanisms by which surfactants disturb the mucus structure are not fully understood, nonetheless, they could possibly affect the mucus gel properties by causing depletion of the glycoprotein constituents such as non-mucin proteins and mucin associated lipids. This might lead to the conclusion that polysorbates, by reducing the viscoelasticity of mucus gel could alleviate its barrier properties and facilitate the diffusion of concomitantly administered drugs via mucus gel.

  3. Methotrexate intercalated layered double hydroxides with the mediation of surfactants: Mechanism exploration and bioassay study

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Chao-Fan; Tian, De-Ying; Li, Shu-Ping, E-mail: lishuping@njnu.edu.cn; Li, Xiao-Dong

    2015-12-01

    Methotrexatum intercalated layered double hydroxides (MTX/LDHs) hybrids were synthesized by the co-precipitation method and three kinds of nonionic surfactants with different hydrocarbon chain lengths were used. The resulting hybrids were then characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy and transmission electron microscopy (TEM). XRD and FTIR investigations manifest the successful intercalation of MTX anions into the interlayer of LDHs. TEM graphs indicate that the morphology of the hybrids changes with the variation of the chain length of the surfactants, i.e., the particles synthesized using polyethylene glycol (PEG-7) present regular disc morphology with good monodispersity, while samples with the mediation of alkyl polyglycoside (APG-14) are heavily aggregated and samples with the addition of polyvinylpyrrolidone (PVP-10) exhibit irregular branches. Furthermore, the release and bioassay experiments show that monodisperse MTX/LDHs present good controlled-release and are more efficient in the suppression of the tumor cells. - Highlights: • Surfactants could be used to modify the dispersing state of MTX/LDHs hybrids. • Surfactants have great effect on the morphology of MTX/LDHs hybrids. • MTX/LDHs with good monodisperse degree are more efficient in the suppression of the tumor cells.

  4. Effects of surfactants on graphene oxide nanoparticles transport in saturated porous media.

    Science.gov (United States)

    Fan, Wei; Jiang, Xuehui; Lu, Ying; Huo, Mingxin; Lin, Shanshan; Geng, Zhi

    2015-09-01

    Transport behaviors of graphene oxide nanoparticles (GONPs) in saturated porous media were examined as a function of the presence and concentration of anionic surfactant (SDBS) and non-ionic surfactant (Triton X-100) under different ionic strength (IS). The results showed that the GONPs were retained obviously in the sand columns at both IS of 50 and 200mmol/L, and they were more mobile at lower IS. The presence and concentration of surfactants could enhance the GONP transport, particularly as observed at higher IS. It was interesting to see that the GONP transport was surfactant type dependent, and SDBS was more effective to facilitate GONP transport than Triton X-100 in our experimental conditions. The advection-dispersion-retention numerical modeling followed this trend and depicted the difference quantitatively. Derjaguin-Landau-Verwey-Overbeek (DLVO) interaction calculations also were performed to interpret these effects, indicating that secondary minimum deposition was critical in this study. Copyright © 2015. Published by Elsevier B.V.

  5. Critical micelle concentration values for different surfactants measured with solid-phase microextraction fibers.

    Science.gov (United States)

    Haftka, Joris J-H; Scherpenisse, Peter; Oetter, Günter; Hodges, Geoff; Eadsforth, Charles V; Kotthoff, Matthias; Hermens, Joop L M

    2016-09-01

    The amphiphilic nature of surfactants drives the formation of micelles at the critical micelle concentration (CMC). Solid-phase microextraction (SPME) fibers were used in the present study to measure CMC values of 12 nonionic, anionic, cationic, and zwitterionic surfactants. The SPME-derived CMC values were compared to values determined using a traditional surface tension method. At the CMC of a surfactant, a break in the relationship between the concentration in SPME fibers and the concentration in water is observed. The CMC values determined with SPME fibers deviated by less than a factor of 3 from values determined with a surface tension method for 7 out of 12 compounds. In addition, the fiber-water sorption isotherms gave information about the sorption mechanism to polyacrylate-coated SPME fibers. A limitation of the SPME method is that CMCs for very hydrophobic cationic surfactants cannot be determined when the cation exchange capacity of the SPME fibers is lower than the CMC value. The advantage of the SPME method over other methods is that CMC values of individual compounds in a mixture can be determined with this method. However, CMC values may be affected by the presence of compounds with other chain lengths in the mixture because of possible mixed micelle formation. Environ Toxicol Chem 2016;35:2173-2181. © 2016 SETAC. © 2016 SETAC.

  6. Washing-resistant surfactant coated surface is able to inhibit pathogenic bacteria adhesion

    Science.gov (United States)

    Treter, Janine; Bonatto, Fernando; Krug, Cristiano; Soares, Gabriel Vieira; Baumvol, Israel Jacob Rabin; Macedo, Alexandre José

    2014-06-01

    Surface-active substances, which are able to organize themselves spontaneously on surfaces, triggering changes in the nature of the solid-liquid interface, are likely to influence microorganism adhesion and biofilm formation. Therefore, this study aimed to evaluate chemical non-ionic surfactants activity against pathogenic microbial biofilms and to cover biomaterial surfaces in order to obtain an anti-infective surface. After testing 11 different surfactants, Pluronic F127 was selected for further studies due to its non-biocidal properties and capability to inhibit up to 90% of biofilm formation of Gram-positive pathogen and its clinical isolates. The coating technique using direct impregnation on the surface showed important antibiofilm formation characteristics, even after extensive washes. Surface roughness and bacterial surface polarity does not influence the adhesion of Staphylococcus epidermidis, however, the material coated surface became extremely hydrophilic. The phenotype of S. epidermidis does not seem to have been affected by the contact with surfactant, reinforcing the evidence that a physical phenomenon is responsible for the activity. This paper presents a simple method of surface coating employing a synthetic surfactant to prevent S. epidermidis biofilm formation.

  7. Investigation of nonionic diazo dye-doped polymer dispersed liquid ...

    Indian Academy of Sciences (India)

    (DGIST), Daegu 711-873, Korea. MS received 1 December 2010; revised 25 May 2011. Abstract. Sudan black B (SBB) was used to investigate as the nonionic diazo dye-doped in polymer dispersed liq- uid crystal (PDLC) display, by polymerization-induced phase separation (PIPS) method. The maximum absorbance,.

  8. Nonionic emulsion-mediated synthesis of zeolite beta

    Indian Academy of Sciences (India)

    ... the reported nonionic emulsion system showed a faster nucleation rate. Furthermore, the emulsion system could stabilize the beta product and retarded its further transformation to ZSM-5 even under the high crystallization temperature at 453 K. Additionally, the beta particle size could be tuned by the adoption of different ...

  9. The Hazards of Non-Ionizing Radiation of Telecommunication Mast ...

    African Journals Online (AJOL)

    The health hazards of non-ionizing radiation from telecommunication mast on the exposed community were assessed using a descriptive cross-sectional survey. The socio-demographic pattern and hazard profile of the respondent were documented. The results of the data showed that majority of respondents (60.8%) were ...

  10. MICROBIAL SURFACTANTS IN ENVIRONMENTAL TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    T. P. Pirog

    2015-08-01

    Full Text Available It was shown literature and own experimental data concerning the use of microbial surface active glycolipids (rhamno-, sophoro- and trehalose lipids and lipopeptides for water and soil purification from oil and other hydrocarbons, removing toxic heavy metals (Cu2+, Cd2+, Ni2+, Pb2+, degradation of complex pollution (oil and other hydrocarbons with heavy metals, and the role of microbial surfactants in phytoremediation processes. The factors that limit the use of microbial surfactants in environmental technologies are discussed. Thus, at certain concentrations biosurfactant can exhibit antimicrobial properties and inhibit microorganisms destructing xenobiotics. Microbial biodegradability of surfactants may also reduce the effectiveness of bioremediation. Development of effective technologies using microbial surfactants should include the following steps: monitoring of contaminated sites to determine the nature of pollution and analysis of the autochthonous microbiota; determining the mode of surfactant introduction (exogenous addition of stimulation of surfactant synthesis by autochthonous microbiota; establishing an optimal concentration of surfactant to prevent exhibition of antimicrobial properties and rapid biodegradation; research both in laboratory and field conditions.

  11. SANS method study of surfactant mixture system TX-100+C16TAB in heavy water solutions

    Science.gov (United States)

    Rajewska, A.; Islamov, A. Kh; Bakeeva, R. F.

    2017-05-01

    The mixture system of two classic surfactants cationic and non-ionic - C16TAB (hexadecyltrimethylammonium bromide)+TX-100(p-(1,1,3,3-tetramethyl) poly(oxyethylene) in heavy water solutions was investigated at temperatures 30o, 50o, 70o for compositions 1:1, 2:1, 3:1 by the small-angle neutron scattering(SANS) method on spectrometer (‘YuMO’) at the IBR-2 pulsed neutron source at FLNP, JINR in Dubna (Russia). Measurements have covered Q range from 7x10-3 to 0.4 Å-1. The SANS measurements of aqueous solutions of nonionic / cationic surfactants have shown that the mixed micelles are formed [1-2]. From the measured dependence of the scattered intensity on the scattering angle, we derived the size, shape of micelles, aggregation number at various compositions and temperatures. The size of mixed micelle is a weak function of the mixing ratio between the two components.

  12. Rheological Properties of Silica Nanoparticles in Brine and Brine-Surfactant Systems

    Science.gov (United States)

    Pales, Ashley; Kinsey, Erin; Li, Chunyan; Mu, Linlin; Bai, Lingyun; Clifford, Heather; Darnault, Christophe

    2016-04-01

    Rheological Properties of Silica Nanoparticles in Brine and Brine-Surfactant Systems Ashley R. Pales, Erin Kinsey, Chunyan Li, Linlin Mu, Lingyun Bai, Heather Clifford, and Christophe J. G. Darnault Department of Environmental Engineering and Earth Sciences, Laboratory of Hydrogeoscience and Biological Engineering, L.G. Rich Environmental Laboratory, Clemson University, Clemson, SC, USA Nanofluids are suspensions of nanometer sized particles in any fluid base, where the nanoparticles effect the properties of the fluid base. Commonly, nanofluids are water based, however, other bases such as ethylene-glycol, glycerol, and propylene-glycol, have been researched to understand the rheological properties of the nanofluids. This work aims to understand the fundamental rheological properties of silica nanoparticles in brine based and brine-surfactant based nanofluids with temperature variations. This was done by using variable weight percent of silica nanoparticles from 0.001% to 0.1%. Five percent brine was used to create the brine based nanofluids; and 5% brine with 2CMC of Tween 20 nonionic surfactant (Sigma-Aldrich) was used to create the brine-surfactant nanofluid. Rheological behaviors, such as shear rate, shear stress, and viscosity, were compared between these nanofluids at 20C and at 60C across the varied nanoparticle wt%. The goal of this work is to provide a fundamental basis for future applied testing for enhanced oil recovery. It is hypothesized that the addition of surfactant will have a positive impact on nanofluid properties that will be useful for enhance oil recovery. Differences have been observed in preliminary data analysis of the rheological properties between these two nanofluids indicating that the surfactant is having the hypothesized effect.

  13. Perstraction of Intracellular Pigments through Submerged Fermentation of Talaromyces spp. in a Surfactant Rich Media: A Novel Approach for Enhanced Pigment Recovery

    Directory of Open Access Journals (Sweden)

    Lourdes Morales-Oyervides

    2017-06-01

    Full Text Available A high percentage of the pigments produced by Talaromyces spp. remains inside the cell, which could lead to a high product concentration inhibition. To overcome this issue an extractive fermentation process, perstraction, was suggested, which involves the extraction of the intracellular products out of the cell by using a two-phase system during the fermentation. The present work studied the effect of various surfactants on secretion of intracellular pigments produced by Talaromyces spp. in submerged fermentation. Surfactants used were: non-ionic surfactants (Tween 80, Span 20 and Triton X-100 and a polyethylene glycerol polymer 8000, at different concentrations (5, 20, 35 g/L. The highest extracellular pigment yield (16 OD500nm was reached using Triton X-100 (35 g/L, which was 44% higher than the control (no surfactant added. The effect of addition time of the selected surfactant was further studied. The highest extracellular pigment concentration (22 OD500nm was achieved when the surfactant was added at 120 h of fermentation. Kinetics of extracellular and intracellular pigments were examined. Total pigment at the end of the fermentation using Triton X-100 was 27.7% higher than the control, confirming that the use of surfactants partially alleviated the product inhibition during the pigment production culture.

  14. Structural Studies of Protein-Surfactant Complexes

    International Nuclear Information System (INIS)

    Chodankar, S. N.; Aswal, V. K.; Wagh, A. G.

    2008-01-01

    The structure of protein-surfactant complexes of two proteins bovine serum albumin (BSA) and lysozyme in presence of anionic surfactant sodium dodecyl sulfate (SDS) has been studied using small-angle neutron scattering (SANS). It is observed that these two proteins form different complex structures with the surfactant. While BSA protein undergoes unfolding on addition of surfactant, lysozyme does not show any unfolding even up to very high surfactant concentrations. The unfolding of BSA protein is caused by micelle-like aggregation of surfactant molecules in the complex. On the other hand, for lysozyme protein there is only binding of individual surfactant molecules to protein. Lysozyme in presence of higher surfactant concentrations has protein-surfactant complex structure coexisting with pure surfactant micelles

  15. Palladium-catalysed electrophilic aromatic C-H fluorination

    Science.gov (United States)

    Yamamoto, Kumiko; Li, Jiakun; Garber, Jeffrey A. O.; Rolfes, Julian D.; Boursalian, Gregory B.; Borghs, Jannik C.; Genicot, Christophe; Jacq, Jérôme; van Gastel, Maurice; Neese, Frank; Ritter, Tobias

    2018-02-01

    Aryl fluorides are widely used in the pharmaceutical and agrochemical industries, and recent advances have enabled their synthesis through the conversion of various functional groups. However, there is a lack of general methods for direct aromatic carbon-hydrogen (C-H) fluorination. Conventional methods require the use of either strong fluorinating reagents, which are often unselective and difficult to handle, such as elemental fluorine, or less reactive reagents that attack only the most activated arenes, which reduces the substrate scope. A method for the direct fluorination of aromatic C-H bonds could facilitate access to fluorinated derivatives of functional molecules that would otherwise be difficult to produce. For example, drug candidates with improved properties, such as increased metabolic stability or better blood-brain-barrier penetration, may become available. Here we describe an approach to catalysis and the resulting development of an undirected, palladium-catalysed method for aromatic C-H fluorination using mild electrophilic fluorinating reagents. The reaction involves a mode of catalysis that is unusual in aromatic C-H functionalization because no organometallic intermediate is formed; instead, a reactive transition-metal-fluoride electrophile is generated catalytically for the fluorination of arenes that do not otherwise react with mild fluorinating reagents. The scope and functional-group tolerance of this reaction could provide access to functional fluorinated molecules in pharmaceutical and agrochemical development that would otherwise not be readily accessible.

  16. Corrosion resistant materials for fluorine and hydrogen fluoride

    International Nuclear Information System (INIS)

    Hauffe, K.

    1984-01-01

    Aluminum and Duralumin are resistant against fluorine and hydrogen fluoride up to 600 and 700 K, respectively. The resistance of nickel and its alloys, particularly monel, against fluorine and hydrogen fluoride is fairly good up to 900 and 800 K. During the attack of nickel-chromium alloys by fluorine between 1000 and 1300 K, it appears an inner fluorination similarly to the inner oxidation. The resistance of titanium in water-free liquid fluorine at lower temperatures with -1 is comparable to that of nickel and monel. However, the corrosion of titanium in gaseous fluorine amounts at 377 K only 0,0082 mm.a -1 . In spite of their limited resistance against fluorine and hydrogen fluoride, very pure molybdenum and tungsten are employed as construction materials in the rocket technology because of their large strength at high temperatures if fluorine-hydrogen and fluorine-hydrazine flames are used. Lanthanum and calcium borides are only little attacked by fluorine hydrazine flames between 1400 and 1800 K; they are superior to all special grade alloys. The same is true in a lower temperature region (290-400 K) with fluorcarbon resins. Organic materials substitute in increasing extent metal alloys and non-metal inorganic materials. (orig.) [de

  17. Electrolytes including fluorinated solvents for use in electrochemical cells

    Science.gov (United States)

    Tikhonov, Konstantin; Yip, Ka Ki; Lin, Tzu-Yuan

    2015-07-07

    Provided are electrochemical cells and electrolytes used to build such cells. The electrolytes include ion-supplying salts and fluorinated solvents capable of maintaining single phase solutions with the salts at between about -30.degree. C. to about 80.degree. C. The fluorinated solvents, such as fluorinated carbonates, fluorinated esters, and fluorinated esters, are less flammable than their non-fluorinated counterparts and increase safety characteristics of cells containing these solvents. The amount of fluorinated solvents in electrolytes may be between about 30% and 80% by weight not accounting weight of the salts. Fluorinated salts, such as fluoroalkyl-substituted LiPF.sub.6, fluoroalkyl-substituted LiBF.sub.4 salts, linear and cyclic imide salts as well as methide salts including fluorinated alkyl groups, may be used due to their solubility in the fluorinated solvents. In some embodiments, the electrolyte may also include a flame retardant, such as a phosphazene or, more specifically, a cyclic phosphazene and/or one or more ionic liquids.

  18. Treatment with exogenous surfactant stimulates endogenous surfactant synthesis in premature infants with respiratory distress syndrome

    NARCIS (Netherlands)

    Bunt, JEH; Carnielli, VP; Janssen, DJ; Wattimena, JLD; Hop, WC; Sauer, PJ; Zimmermann, LJI

    2000-01-01

    Objective: Treatment of preterm infants with respiratory distress syndrome (RDS) with exogenous surfactant has greatly improved clinical outcome. Some infants require multiple doses, and it has not been studied whether these large amounts of exogenous surfactant disturb endogenous surfactant

  19. Chemoselective fluorination and chemoinformatic analysis of griseofulvin: Natural vs fluorinated fungal metabolites.

    Science.gov (United States)

    Paguigan, Noemi D; Al-Huniti, Mohammed H; Raja, Huzefa A; Czarnecki, Austin; Burdette, Joanna E; González-Medina, Mariana; Medina-Franco, José L; Polyak, Stephen J; Pearce, Cedric J; Croatt, Mitchell P; Oberlies, Nicholas H

    2017-10-15

    Griseofulvin is a fungal metabolite and antifungal drug used for the treatment of dermatophytosis in both humans and animals. Recently, griseofulvin and its analogues have attracted renewed attention due to reports of their potential anticancer effects. In this study griseofulvin (1) and related analogues (2-6, with 4 being new to literature) were isolated from Xylaria cubensis. Six fluorinated analogues (7-12) were synthesized, each in a single step using the isolated natural products and Selectflour, so as to examine the effects of fluorine incorporation on the bioactivities of this structural class. The isolated and synthesized compounds were screened for activity against a panel of cancer cell lines (MDA-MB-435, MDA-MB-231, OVCAR3, and Huh7.5.1) and for antifungal activity against Microsporum gypseum. A comparison of the chemical space occupied by the natural and fluorinated analogues was carried out by using principal component analysis, documenting that the isolated and fluorinated analogues occupy complementary regions of chemical space. However, the most active compounds, including two fluorinated derivatives, were centered around the chemical space that was occupied by the parent compound, griseofulvin, suggesting that modifications must preserve certain attributes of griseofulvin to conserve its activity. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  20. Effects of fluorine on the human fetus

    Energy Technology Data Exchange (ETDEWEB)

    He, H.; Cheng, Z.S.; Liu, W.Q. [Huaxi Medical University, Huaxi (China)

    2008-10-15

    In an endemic fluorosis area, 16 fetuses that were delivered during their sixth to eighth month of gestation by means of artificial abortion were collected and studied. The results (compared to 10 control fetuses from a non-endemic area) show that fluorine levels in tissues are obviously high, especially in brain, calvarium, and femur. The activity of alkaline phosphatase in femur and kidney was raised. By observation of the ultrastructure of samples, the number of mitochondria, rough-surfaced endoplasmic reticulum, and free ribosome in neurons of cerebral cortex were reduced, and the rough-surfaced endoplasmic reticulum was obviously dilated. These findings indicate that the neurons of the cerebral cortex in the developing brain may be one of the targets of fluorine.

  1. Spectrographic determination of chlorine and fluorine

    International Nuclear Information System (INIS)

    Contamin, G.

    1965-04-01

    Experimental conditions have been investigated in order to obtain the highest sensitivity in spectrographic determination of chlorine and fluorine using the Fassel method of excitation in an inert atmosphere. The influence of the nature of the atmosphere, of the discharge conditions and of the matrix material has been investigated. The following results have been established: 1. chlorine determination is definitely possible: a working curve has been drawn between 10 μg and 100 μg, the detection limit being around 5 μg; 2. fluorine determination is not satisfactory: the detection limit is still of the order of 80 μg. The best operating conditions have been defined for both elements. (author) [fr

  2. Study of adjuvant effect of model surfactants from the groups of alkyl sulfates, alkylbenzene sulfonates, alcohol ethoxylates and soaps.

    Science.gov (United States)

    Clausen, S K; Sobhani, S; Poulsen, O M; Poulsen, L K; Nielsen, G D

    2000-11-01

    The sodium salts of representatives of anionic surfactants, dodecylbenzene sulfonate (SDBS), dodecyl sulfate (SDS) and coconut oil fatty acids, and a nonionic surfactant, dodecyl alcohol ethoxylate, were studied for adjuvant effect on the production of specific IgE antibodies in mice. The surfactants were injected subcutaneously (sc) in concentrations of 1000, 100, 10 or 1 mg/l, respectively, together with 1 microg of ovalbumin (OVA). In addition, groups of mice received OVA in saline (control group) or in Al(OH)(3) (positive adjuvant control group). After the primary immunization the mice were boosted up to three times with OVA (0.1 microg sc) in saline. OVA-specific IgE antibodies were determined by the heterologous mouse rat passive cutaneous anaphylaxis test. The results were confirmed by a specific ELISA method. After the first booster, the Al(OH)(3) group and the 10 mg/l SDS group showed a statistically significant increase in OVA specific IgE levels. After two boosters, a statistically significant suppression in OVA-specific IgE production occurred with SDS (1000 mg/l), SDBS (1000 and 100 mg/l), coconut soap (1000 mg/l) and the alcohol ethoxylate (10 mg/l). This study suggests that a limited number of surfactants possess an adjuvant effect whereas all surfactants at certain levels can suppress specific IgE production.

  3. Integrated photochemical and biological treatment of a commercial textile surfactant: Process optimization, process kinetics and COD fractionation

    International Nuclear Information System (INIS)

    Arslan-Alaton, Idil; Cokgor, Emine Ubay; Koban, Baris

    2007-01-01

    The biodegradability of surfactants is a frequent and complex issue arising both at domestic as well as industrial treatment facilities. In the present experimental study, the integrated photochemical (H 2 O 2 /UV-C) and biochemical (activated sludge) treatment of a commercial grade nonionic/anionic textile surfactant formulation was investigated. Photochemical baseline experiments have shown that once the initial pH and H 2 O 2 dose were optimized, practically complete COD removal (COD o = 500 ± 30 mg L -1 ) could be achieved. Once the COD was elevated to values being typical for the textile fabric preparation stage, treatment efficiency was seriously retarded provided that the photochemical treatment conditions remained constant. Moreover, a definite relationship existed between H 2 O 2 consumption and COD removal for H 2 O 2 /UV-C advanced oxidation of the textile surfactant. In the second part of the study, COD abatement was modeled for the biodegradation of untreated and photochemically pretreated textile surfactant formulation according to their COD fractions. Results have indicated that the readily biodegradable and rapidly hydrolysable COD fractions of the textile surfactant solution could be appreciably increased upon exposure to an optimum H 2 O 2 concentration (60 mM; i.e. 2.1 g H 2 O 2 (g COD o ) -1 ) and extended UV-C irradiation times (i.e. 90 and 120 min)

  4. UV-laser-assisted liquid phase fluorination of PMMA

    Energy Technology Data Exchange (ETDEWEB)

    Wochnowski, C. [BIAS - Bremer Institut fuer angewandte Strahltechnik, Klagenfurter Str. 2, 28359 Bremen (Germany)], E-mail: carsten.wochnowski@dpma.de; Di Ferdinando, M.; Giolli, C. [Dipartimento di Chimica, Universita di Firenze, via della Lastruccia 3, 50019 Sesto Fiorentino (Italy); Consorzio Interuniversitario Nazionale per la Scienza e Tecnologia dei Materiali (INSTM), via Benedetto Varchi 59, 50132 Firenze (Italy); Vollertsen, F. [BIAS - Bremer Institut fuer angewandte Strahltechnik, Klagenfurter Str. 2, 28359 Bremen (Germany); Bardi, U. [Dipartimento di Chimica, Universita di Firenze, via della Lastruccia 3, 50019 Sesto Fiorentino (Italy); Consorzio Interuniversitario Nazionale per la Scienza e Tecnologia dei Materiali (INSTM), via Benedetto Varchi 59, 50132 Firenze (Italy)

    2007-10-15

    Polymethylmethacrylate (PMMA) substrate was covered with liquid 1,2,3,5-tetrafluorobenzene by spin coating. Then the sample was irradiated by a KrF-excimer laser ({lambda} = 248 nm). Thus, fluorine is released from the fluorine-containing precursor diffusing into the polymeric substrate material where it is expected to substitute the hydrogen atoms of the polymeric molecule and form a water-repellent (hydrophobic) fluorinated polymer. After drying out the polymeric substrate, the sample surface was investigated by SEM, EDX, XPS and contact angle measurement method in order to determine the fluorine content and the wettability of the treated polymeric surface as well as the substitution sites inside the polymeric molecule. The measurements indicate some chemically bonded fluorine at the top of the sample layer. A UV-photochemical fluorination mechanism is proposed based on the XPS spectra evaluation.

  5. A rapid stereoselective synthesis of fluorinated carbohydrates

    International Nuclear Information System (INIS)

    Adam, M.J.; Neeser, J-R.; Hall, L.D.; Pate, B.D.

    1983-01-01

    Acetyl hypofluorite has been added to six unsaturated carbohydrates which contain the vinyl ether moiety. All reactions were rapid (less than 5 min.) at -78 degrees C and gave, with one exception, high yields of isomerically pure products. The hypofluorite was shown to add exclusively in a cis mode and with a strong preference for a particular 'face' of the double bond. As well as the syntheses, NMR data and preferred conformations for the fluorinated products are also discussed

  6. Muon-fluorine entanglement in fluoropolymers.

    Science.gov (United States)

    Lancaster, T; Pratt, F L; Blundell, S J; McKenzie, I; Assender, H E

    2009-08-26

    We present the results of muon spin relaxation measurements on the fluoropolymers polytetrafluoroethylene (PTFE), poly(vinylidene fluoride) (PVDF) and poly(vinyl fluoride) (PVF). Entanglement between the muon spin and the spins of the fluorine nuclei in the polymers allows us to identify the different muon stopping states that occur in each of these materials and provides a method of probing the local environment of the muon and the dynamics of the polymer chains.

  7. The Dependency of Surfactants on the Metal Surface Removal Using CO2-HNO3 Microemulsion

    International Nuclear Information System (INIS)

    Park, Kwangheon; Lee, Jungkeun; Koh, Moosung; Kim, Hongdoo; Kim, Hakwon; Koh, Moosung

    2007-01-01

    Metal surface removal is one of important steps in decontamination of radioactive contaminated metal parts and components. The conventional chemical stripping method prevalently used today cleans materials by dipping them into a strong acidic or alkaline solution in order to remove metal film. Because so much more toxic solvent is used than needed, excessive expense is incurred in treating the waste by-products. Carbon dioxide (CO 2 ) has excellent properties; economical, environment.friendly, good in penetration and reasonable in critical conditions. However, CO 2 is a non-polar compound that is very poor at dissolving polarized materials. To increase the dissolving power of CO 2 against polar materials, our laboratory has developed a CO 2 micro-emulsion method. We use acid- CO 2 microemulsion in metal surface or coating removal. Formation of microemulsion in liquid or supercritical CO 2 essentially needs surfactants. So far, we have developed 3 types of surfactants- fluorinated AOT, proline, and NP-4. This three surfactants help the formation of microemulsion of water (or acid) with CO 2 . In this paper, we compare the characteristics of microemulsion formed by each surfactant in metal coating removal. Quartz crystal microbalance (QCM) was used to measure the rate of metal coating removal

  8. Fluorine-functionalized ionic liquids with high oxygen solubility

    OpenAIRE

    Vanhoutte, Gijs; Hojniak, Sandra; Bardé, Fanny; Binnemans, Koen; Fransaer, Jan

    2018-01-01

    Eight fluorine-functionalized ionic liquids were synthesized and the oxygen solubility was compared to commercial ionic liquids without the extra fluorinated chain. The concentration of dissolved oxygen increased with the fluorine content of the alkyl chain, which can be attached either to the cation or the anion. This approach maintains the freedom to design an ionic liquid for a specific application, while at the same time the oxygen solubility is increased.

  9. Determination of carbon chlorine and fluorine in uranium dioxide

    International Nuclear Information System (INIS)

    Kijko, N.I.; Timofeev, G.A.

    1983-01-01

    Techniques of chlorine and fluorine determination and simultaneous determination of carbon and chlorine in electrolytic uranium dioxide are described. The method of chlorine and fluorine determination is based on their separation during oxide pyrohydrolysis with subsequent spectrophotometric analysis of condensate. Lower determination limits constitute 1 μg for chlorine, 0.5 μg for fluorine. Relative standard deviation when the content of impurities analyzed is 10 -3 % constitutes 0.05-0.07

  10. Consultants' meeting on reactor production and utilization of Fluorine-18

    International Nuclear Information System (INIS)

    Vera Ruiz, H.

    1986-08-01

    The nuclear research reactors with thermal neutron fluxes in the order of 1x10 13 cm -2 s -1 can produce sufficient quantities of fluorine-18 for biomedical applications. The recent improvements in labelling with fluorine-18 via nucleophilic reactions have made it possible to develop efficient synthesis techniques for preparing useful quantities of radiopharmaceuticals, which are of great interest for studying regional metabolic functions with positron emission tomography. Other non-medical activities in the field of pharmacology, toxicology, no-carrier-added syntheses and reaction mechanisms in fluorine chemistry can also conveniently be studied using fluorine-18 as a tracer

  11. Dietary High Fluorine Alters Intestinal Microbiota in Broiler Chickens.

    Science.gov (United States)

    Luo, Qin; Cui, Hengmin; Peng, Xi; Fang, Jing; Zuo, Zhicai; Deng, Junliang; Liu, Juan; Deng, Yubing

    2016-10-01

    This study investigated the effects of dietary high fluorine on ileal and cecal microbiota in broiler chickens. Two hundred eighty 1-day-old broiler chickens were randomly assigned to four groups and raised for 42 days. The control group was fed a corn-soybean basal diet (fluorine 22.6 mg/kg). The other three groups were fed the same basal diet, but supplemented with 400, 800, and 1200 mg/kg fluorine (high fluorine groups I, II, and III), administered in the form of sodium fluoride. The microbiota of ileal and cecal digesta was assessed with plate counts and polymerase chain reaction-based denaturing gradient gel electrophoresis (PCR-DGGE). It was found that, compared with those in the control group, the counts of Lactobacillus spp. and Bifidobacterium spp. were markedly decreased (P fluorine groups II and III. PCR-DGGE analysis showed that the number of DGGE bands, similarity, and Shannon index of ileal and cecal bacteria were markedly reduced in the high fluorine groups II and III from 21 to 42 days. Sequencing analysis revealed that the composition of the intestinal microbiota was altered in the high fluorine groups. In conclusion, dietary fluorine in the range of 800-1200 mg/kg obviously altered the bacterial counts, and the diversity and composition of intestinal microbiota in broiler chickens, a finding which implies that dietary high fluorine can disrupt the natural balance and structure of the intestinal microbiota.

  12. Production of elemental fluorine at IPEN - S. Paulo, Brazil

    International Nuclear Information System (INIS)

    Abrao, A.; Ikuta, A.; Wirkner, F.M.; Silva, F.P. da.

    1981-04-01

    The construction, installation and operation of a pilot unit for electrolytic generation of elemental fluorine are described. The 400 A monel electrolytic cell is heated by a water jacket. The electrolyte has the composition KF.1,8 - 2,0 HF that is maintained by intermittent addition of gaseous HF. Pre-electrolysis is made using nickel anodes which are then exchanged by non-graphitized carbon ones. Systems for purification of elemental fluorine by cryoscopy and absortion of HF, compression and storage for fluorine are described. Pure fluorine is used for the preparation of uranium hexafluoride. Identification of problems and difficulties and their solution are pointed out. (Author) [pt

  13. Comparison of topotactic fluorination methods for complex oxide films

    Science.gov (United States)

    Moon, E. J.; Choquette, A. K.; Huon, A.; Kulesa, S. Z.; Barbash, D.; May, S. J.

    2015-06-01

    We have investigated the synthesis of SrFeO3-αFγ (α and γ ≤ 1) perovskite films using topotactic fluorination reactions utilizing poly(vinylidene fluoride) as a fluorine source. Two different fluorination methods, a spin-coating and a vapor transport approach, were performed on as-grown SrFeO2.5 films. We highlight differences in the structural, compositional, and optical properties of the oxyfluoride films obtained via the two methods, providing insight into how fluorination reactions can be used to modify electronic and optical behavior in complex oxide heterostructures.

  14. Comparison of topotactic fluorination methods for complex oxide films

    Energy Technology Data Exchange (ETDEWEB)

    Moon, E. J., E-mail: em582@drexel.edu; Choquette, A. K.; Huon, A.; Kulesa, S. Z.; May, S. J., E-mail: smay@coe.drexel.edu [Department of Materials Science and Engineering, Drexel University, Philadelphia, Pennsylvania 19104 (United States); Barbash, D. [Centralized Research Facilities, Drexel University, Philadelphia, Pennsylvania 19104 (United States)

    2015-06-01

    We have investigated the synthesis of SrFeO{sub 3−α}F{sub γ} (α and γ ≤ 1) perovskite films using topotactic fluorination reactions utilizing poly(vinylidene fluoride) as a fluorine source. Two different fluorination methods, a spin-coating and a vapor transport approach, were performed on as-grown SrFeO{sub 2.5} films. We highlight differences in the structural, compositional, and optical properties of the oxyfluoride films obtained via the two methods, providing insight into how fluorination reactions can be used to modify electronic and optical behavior in complex oxide heterostructures.

  15. Comparison of topotactic fluorination methods for complex oxide films

    Directory of Open Access Journals (Sweden)

    E. J. Moon

    2015-06-01

    Full Text Available We have investigated the synthesis of SrFeO3−αFγ (α and γ ≤ 1 perovskite films using topotactic fluorination reactions utilizing poly(vinylidene fluoride as a fluorine source. Two different fluorination methods, a spin-coating and a vapor transport approach, were performed on as-grown SrFeO2.5 films. We highlight differences in the structural, compositional, and optical properties of the oxyfluoride films obtained via the two methods, providing insight into how fluorination reactions can be used to modify electronic and optical behavior in complex oxide heterostructures.

  16. Biomimicry of surfactant protein C.

    Science.gov (United States)

    Brown, Nathan J; Johansson, Jan; Barron, Annelise E

    2008-10-01

    Since the widespread use of exogenous lung surfactant to treat neonatal respiratory distress syndrome, premature infant survival and respiratory morbidity have dramatically improved. Despite the effectiveness of the animal-derived surfactant preparations, there still remain some concerns and difficulties associated with their use. This has prompted investigation into the creation of synthetic surfactant preparations. However, to date, no clinically used synthetic formulation is as effective as the natural material. This is largely because the previous synthetic formulations lacked analogues of the hydrophobic proteins of the lung surfactant system, SP-B and SP-C, which are critical functional constituents. As a result, recent investigation has turned toward the development of a new generation of synthetic, biomimetic surfactants that contain synthetic phospholipids along with a mimic of the hydrophobic protein portion of lung surfactant. In this Account, we detail our efforts in creating accurate mimics of SP-C for use in a synthetic surfactant replacement therapy. Despite SP-C's seemingly simple structure, the predominantly helical protein is extraordinarily challenging to work with given its extreme hydrophobicity and structural instability, which greatly complicates the creation of an effective SP-C analogue. Drawing inspiration from Nature, two promising biomimetic approaches have led to the creation of rationally designed biopolymers that recapitulate many of SP-C's molecular features. The first approach utilizes detailed SP-C structure-activity relationships and amino acid folding propensities to create a peptide-based analogue, SP-C33. In SP-C33, the problematic and metastable polyvaline helix is replaced with a structurally stable polyleucine helix and includes a well-placed positive charge to prevent aggregation. SP-C33 is structurally stable and eliminates the association propensity of the native protein. The second approach follows the same design

  17. [Ionizing and non-ionizing radiation (comparative risk estimations)].

    Science.gov (United States)

    Grigor'ev, Iu G

    2012-01-01

    The population has widely used mobile communication for already more than 15 years. It is important to note that the use of mobile communication has sharply changed the conditions of daily exposure of the population to EME We expose our brain daily for the first time in the entire civilization. The mobile phone is an open and uncontrollable source of electromagnetic radiation. The comparative risk estimation for the population of ionizing and non-ionizing radiation was carried out taking into account the real conditions of influence. Comparison of risks for the population of ionizing and non-ionizing radiation leads us to a conclusion that EMF RF exposure in conditions of wide use of mobile communication is potentially more harmful than ionizing radiation influence.

  18. [Fluorine as a factor in premature aging].

    Science.gov (United States)

    Machoy-Mokrzyńska, Anna

    2004-01-01

    The use of fluorine compounds in various areas of medicine, particularly in dentistry, as well as in agriculture and industry became very popular in the second half of the 20th century. Fluorine owed this widespread acceptance to observations that its compounds stimulate ossification processes and reduce the prevalence of caries. Unfortunately, growing expectations overshadowed the truth regarding interactions of fluoride on the molecular level. The fact was often ignored that fluoride is toxic, even though laboratory data stood for a careful approach to the benefits of usage. Excessive exposure to fluoride may lead to acute poisoning, hyperemia, cerebral edema, and degeneration of the liver and kidneys. Acute intoxication through the airways produces coughing, choking, and chills, followed by fever and pulmonary edema. Concentrated solutions of fluorine compounds produce difficult to heal necrotic lesions. In spite of these dramatic symptoms, acute intoxications are relatively rare; the more common finding is chronic intoxication attributable to the universal presence of fluorine compounds in the environment. The first noticeable signs of excessive exposure to fluoride in contaminated water, air, and food products include discolorations of the enamel. Dental fluorosis during tooth growth and loss of dentition in adulthood are two consequences of chronic intoxication with fluorine compounds. Abnormalities in mineralization processes affect by and large the osteoarticular system and are associated with changes in the density and structure of the bone presenting as irregular mineralization of the osteoid. Fluorine compounds also act on the organic part of supporting tissues, including collagen and other proteins, and on cells of the connective tissue. These interactions reduce the content of collagen proteins, modify the structure and regularity of collagen fibers, and induce mineralization of collagen. Interactions with cells produce transient activation of

  19. Application of Surfactant Micellar Solutions as Extractants and Mobile Phases for TLC-Determination of Purine Bases and Doping Agents in Biological Liquids

    Directory of Open Access Journals (Sweden)

    Daria Victorovna Yedamenko

    2015-04-01

    Full Text Available Separation of caffeine and its metabolites (theophylline and theobromine and doping agents (spironolactone, propranolol, and ephedrine and determination of caffeine in serum sample and propranolol and ephedrine in urine were studied on normal-phase thin layers (“Sorbfil-UV-254”. Aqueous organic solvents and aqueous micellar surfactant solutions were compared as the mobile phases for separation. The acceptable separation of purine bases and doping agents was achieved by micellar Thin Layer Chromatography and normal-phase Thin Layer Chromatography. Anionic surfactant solution with added 1-propanol was the best eluent as for caffeine, theophylline, and theobromine separation, as for doping agents. The best characteristics of caffeine extraction from serum, and propranolol and ephedrine from urine were achieved when micellar eluent based on non-ionic Tween-80 surfactant was used. DOI: http://dx.doi.org/10.17807/orbital.v7i1.632

  20. Radiation protection problems by nonionizing electromagnetic radiation in Austria

    International Nuclear Information System (INIS)

    Duftschmid, K.E.

    1984-03-01

    Since about one year an interdisciplinary study group has been established to investigate possible radiation protection problems caused by nonionizing electromagnetic radiation in this country. The aim of this project is to identify major fields of concern, to establish appropriate techniques of measurement and control and eventually develop a sound basis for future legislation. The paper gives a summary on the present results of this study. (Author)