Harvested wood products and REDD+: looking beyond the forest border

Directory of Open Access Journals (Sweden)

Tunggul Butarbutar

2016-05-01

Full Text Available Abstract Background The focus of REDD+ is sensu stricto on maintaining forest carbon stocks. We extend the scope of sustainable management of forest from forests to timber utilization, and study carbon offsets resulting from the utilization of harvested timber for bio energy or harvested wood products (HWPs. The emission budget of harvesting operations depends on the loss of standing biomass by timber extracted from the forest site and logging losses on the one side, and on the other on the wood end use and the utilization of processing residues. We develop two scenarios to quantify the magnitude of CO2 emissions by (1 energetic utilization, and (2 energetic and material utilization of harvested timber and compare the substitution effects for different fossil energy sources. Results The direct energetic use of harvested timber does not compensate for the losses of forest carbon stock. Logging residuals and displacement factors reflecting different wood use constitute by far the most important factor in potential emission reductions. Substitution effects resulting from energetic use of mill residuals and from HWPs have only a subordinated contribution to the total emissions as well as the type of fossil fuel utilized to quantify substitution effects. Material substitution effects associated with harvested wood products show a high potential to increase the climate change benefits. Conclusions The observation and perception of REDD+ should not be restricted to sustainable management and reduced impact logging practices in the forest domain but should be extended to the utilization of extracted timber. Substitution effects from material and energetic utilization of harvested timber result in considerable emission reductions, which can compensate for the loss of forest carbon, and eventually contribute to the overall climate change mitigation benefits from forestry sector.

Diversity in the socio-economic role of the main non-wood forest products for the inhabitants of small villages and large towns in Poland

OpenAIRE

Barszcz, Anna; Suder, Alicja

2009-01-01

The NWFPs (non-wood forest products) sector is of the crucial importance to the Polish households but its social and economic role is varied and depends on place of residence. For the inhabitants of villages and small towns forests are the place of working and NWFPs sale provides an additional financial resource. City-dwellers do not treat NWFPs as a source of income but rather as an element of recreation and they use these products mainly for their own needs. Some remarks for the developing ...

Recent activities in flame retardancy of wood-plastic composites at the Forest Products Laboratory

Science.gov (United States)

Robert H. White; Nicole M. Stark; Nadir Ayrilmis

2011-01-01

For a variety of reasons, wood-plastic composite (WPC) products are widely available for some building applications. In applications such as outdoor decking, WPCs have gained a significant share of the market. As an option to improve the efficient use of wood fiber, the USDA Forest Service, Forest Products Laboratory (FPL), has an extensive research program on WPCs....

Assessing socioeconomic impacts of climate change on U.S. forests, wood-product markets, and forest recreation

Science.gov (United States)

Lloyd C. Irland; Darius Adams; Ralph Alig; Carter J. Betz; Chi-Chung Chen; Mark Hutchins; Bruce A. McCarl; Ken Skog; Brent L. Sohngen

2001-01-01

In this paper we discuss the problems of projecting social and economic changes affecting forests and review recent efforts to assess the wood-market impacts of possible climate changes. To illustrate the range of conditions encountered in projecting socioeconomic change linked to forests, we consider two markedly different uses: forest products markets and forest...

Production of wood fuels from young forests

International Nuclear Information System (INIS)

Korpilahti, A.

1998-01-01

National forest invention data shows that more than 200 000 ha of thinnings should be carried out annually. The stemwood accumulation corresponding to this is about 13 million m 3 . The share of industrial wood is about 5.7 million m 3 , so the energy wood potential is about 7.0 million m 3 . Because the growing stock can use the nutrients liberated from logging residues the topwood mass should not be totally harvested, and at the barren areas it should not be harvested at all. Even the difficult terrain restricts in some extent the harvesting of logging residues. After these reductions the economically harvestible energy wood potential has been estimated to be 5.1 million m 3 corresponding to about 0.9 million toe. The amount of first thinnings has during the last few years been only about one third of the need. The accumulation in the first thinning phase could be about 40-80 m 3 /ha. The annual young stand treatment area has usually been about 200 000 ha, but during the last few years it has remained to a little over 100 000 ha. Harvesting of wood fuels from young stands, based on a lot-chipping method and the traditional production chains, was investigated in the national Bioenergy Research Programme. Equipment of suitable size and price are needed for harvesting of small-diameter trees. The profitability of mechanized harvesting can be improved significantly if the single-tree processing is replaced with multi- tree processing. Multi-tree harvesting can be carried out in all production chains, felling-bunching, in partial and pulpwood harvesting, as well as with bare felling machines and harvesters. About 60 % of the stems were processed with a prototype machine, tested in treatment of young forests. About 70 % of fellings in felling-bunching, already in commercial use, was processed as multi- tree processing, and about 80 % in the partial-tree harvesting. The felling of pulpwood as partial trees was about 25-30 % faster as multi-tree processing than with

An economic model of international wood supply, forest stock and forest area change

Science.gov (United States)

James A. Turner; Joseph Buongiorno; Shushuai Zhu

2006-01-01

Wood supply, the link between roundwood removals and forest resources, is an important component of forest sector models. This paper develops a model of international wood supply within the structure of the spatial equilibrium Global Forest Products Model. The wood supply model determines, for each country, the annual forest harvest, the annual change of forest stock...

Consequences of increasing bioenergy demand on wood and forests: An application of the Global Forest Products Model

Science.gov (United States)

Buongiorno, J.; Raunikar, R.; Zhu, S.

2011-01-01

The Global Forest Products Model (GFPM) was applied to project the consequences for the global forest sector of doubling the rate of growth of bioenergy demand relative to a base scenario, other drivers being maintained constant. The results showed that this would lead to the convergence of the price of fuelwood and industrial roundwood, raising the price of industrial roundwood by nearly 30% in 2030. The price of sawnwood and panels would be 15% higher. The price of paper would be 3% higher. Concurrently, the demand for all manufactured wood products would be lower in all countries, but the production would rise in countries with competitive advantage. The global value added in wood processing industries would be 1% lower in 2030. The forest stock would be 2% lower for the world and 4% lower for Asia. These effects varied substantially by country. ?? 2011 Department of Forest Economics, SLU Ume??, Sweden.

Forests and wood consumption on the carbon balance. Carbon emission reduction by use of wood products

International Nuclear Information System (INIS)

Sikkema, R.; Nabuurs, G.J.

1995-01-01

Until now studies on the greenhouse effect paid much attention to carbon fixation by forests, while the entire CO2 cycle of forests and forest products remained underexposed. Utilization of wood products instead of energy-intensive materials (plastics/steel) and fossil fuels (coal) proves to play an important role as well. The effect of utilization is even greater than that of fixation. In all, additional forests together with the multiple use of trees can contribute substantially to the reduction of CO2 emissions. The contribution can run from 5.3 ton CO2/ha/yr for a mixed forest of oak/beech to 18.9 ton CO2/ha/yr for energy plantations (poplar). 2 figs., 3 tabs

Romanian legal management rules limit wood production in Norway spruce and beech forests

Directory of Open Access Journals (Sweden)

Olivier Bouriaud

2016-09-01

Full Text Available Background The quantitative impact of forest management on forests’ wood resource was evaluated for Picea and Fagus mixed forests. The effects on the productivity of tendering operations, thinnings and rotation length have seldom been directly quantified on landscape scale. Methods Two sites of similar fertility but subject to contrasted forest management were studied with detailed inventories: one in Germany, the other in Romania, and compared with the respective national forest inventories. In Romania, regulations impose very long rotations, low thinnings and a period of no-cut before harvest. In contrast, tending and thinnings are frequent and intense in Germany. Harvests start much earlier and must avoid clear cutting but maintain a permanent forest cover with natural regeneration. While Germany has an average annual wood increment representative for Central Europe, Romania represents the average for Eastern Europe. Results The lack of tending and thinning in the Romanian site resulted in twice as many trees per hectare as in the German site for the same age. The productivity in Romanian production forests was 20 % lower than in Germany despite a similar fertility. The results were supported by the data from the national forest inventory of each country, which confirmed that the same differential exists at country scale. Furthermore, provided the difference in rotation length, two crops are harvested in Germany when only one is harvested in Romania. The losses of production due to a lower level of management in Romania where estimated to reach 12.8 million m3.y-1 in regular mountain production forests, and to 15 million m3.y-1 if managed protection forest is included. Conclusions The productivity of Picea and Fagus mountain forests in Romania is severely depressed by the lack of tending and thinning, by overly long rotations and the existence of a 25-years no-cut period prior to harvest. The average standing volume in Germany was 50

Future carbon storage in harvested wood products from Ontario's Crown forests

International Nuclear Information System (INIS)

Chen, J.; Colombo, S.J.; Ter-Mikaelian, M.T.

2008-01-01

Carbon (C) storage in harvested wood products (HWP) from Ontario's Crown forests were analyzed using a large-scale forest C budget model. The model was used to estimate HWP C stock changes as defined by the Intergovernmental Panel on Climate Change. The harvested C mass was then allocated to 4 HWP end-use categories, notably (1) in use; (2) landfill; (3) energy; and (4) emissions. C mass redistribution among HWP end-use categories was calculated using an age-based C distribution matrix. Emissions for harvest, transport, and manufacturing were accounted for as well as emission reductions gained by using the HWP in place of other construction materials and fossil fuels. Results of the study showed that C storage in HWP is projected to increase by 3.6 Mt per year. The projections indicated that the harvest of wood products in Ontario will result in a steadily increasing C sink in HWP and forests. 51 refs., 8 tabs., 4 figs

Developing technology for large-scale production of forest chips. Wood Energy Technology Programme 1999-2003. Interim report

International Nuclear Information System (INIS)

Hakkila, P.

2003-01-01

Finland is enhancing its use of renewable sources in energy production. From the 1995 level, the use of renewable energy is to be increased by 50 % by 2010, and 100 % by 2025. Wood-based fuels will play a leading role in this development. The main source of wood-based fuels is processing residues from the forest industries. However, as all processing residues are already in use, an increase is possible only as far as the capacity and wood consumption of the forest industries grow. Energy policy affects the production and availability of processing residues only indirectly. Another large source of wood-based energy is forest fuels, consisting of traditional firewood and chips comminuted from low-quality biomass. It is estimated that the reserve of technically harvest-able forest biomass is 10-16 Mm' annually, when no specific cost limit is applied. This corresponds to 2-3 Mtoe or 6-9 % of the present consumption of primary energy in Finland. How much of this re-serve it will actually be possible to harvest and utilize depends on the cost competitiveness of forest chips against alternative sources of energy. A goal of Finnish energy and climate strategies is to use 5 Mm' forest chips annually by 2010. The use of wood fuels is being promoted by means of taxation, investment aid and support for chip production from young forests. Furthermore, research and development is being supported in order to create techno-economic conditions for the competitive production of forest chips. In 1999, the National Technology Agency Tekes established the five-year Wood Energy Technology Programme to stimulate the development of efficient systems for the large-scale production of forest chips. Key tar-gets are competitive costs, reliable supply and good quality chips. The two guiding principles of the programme are: (1) close cooperation between researchers and practitioners and (2) to apply research and development to the practical applications and commercialization. As of November

How to reconcile wood production and biodiversity conservation? The Pan-European boreal forest history gradient as an "experiment".

Science.gov (United States)

Naumov, Vladimir; Manton, Michael; Elbakidze, Marine; Rendenieks, Zigmars; Priednieks, Janis; Uhlianets, Siarhei; Yamelynets, Taras; Zhivotov, Anton; Angelstam, Per

2018-07-15

There are currently competing demands on Europe's forests and the finite resources and services that they can offer. Forestry intensification that aims at mitigating climate change and biodiversity conservation is one example. Whether or not these two objectives compete can be evaluated by comparative studies of forest landscapes with different histories. We test the hypothesis that indicators of wood production and biodiversity conservation are inversely related in a gradient of long to short forestry intensification histories. Forest management data containing stand age, volume and tree species were used to model the opportunity for wood production and biodiversity conservation in five north European forest regions representing a gradient in landscape history from very long in the West and short in the East. Wood production indicators captured the supply of coniferous wood and total biomass, as well as current accessibility by transport infrastructure. Biodiversity conservation indicators were based on modelling habitat network functionality for focal bird species dependent on different combinations of stand age and tree species composition representing naturally dynamic forests. In each region we randomly sampled 25 individual 100-km 2 areas with contiguous forest cover. Regarding wood production, Sweden's Bergslagen region had the largest areas of coniferous wood, followed by Vitebsk in Belarus and Zemgale in Latvia. NW Russia's case study regions in Pskov and Komi had the lowest values, except for the biomass indicator. The addition of forest accessibility for transportation made the Belarusian and Swedish study region most suitable for wood and biomass production, followed by Latvia and two study regions in NW Russian. Regarding biodiversity conservation, the overall rank among regions was opposite. Mixed and deciduous habitats were functional in Russia, Belarus and Latvia. Old Scots pine and Norway spruce habitats were only functional in Komi. Thus

Regional and forest-level estimates of carbon stored in harvested wood products from the United States Forest Service Northern Region, 1906-2010

Science.gov (United States)

N. Anderson; J. Young; K. Stockmann; K. Skog; S. Healey; D. Loeffler; J.G. Jones; J. Morrison

2013-01-01

Global forests capture and store significant amounts of CO2 through photosynthesis. When carbon is removed from forests through harvest, a portion of the harvested carbon is stored in wood products, often for many decades. The United States Forest Service (USFS) and other agencies are interested in accurately accounting for carbon flux associated with harvested wood...

Importance of wood from planted forests for manufacturing industry

Directory of Open Access Journals (Sweden)

Victor Almeida De Araujo

2017-06-01

Full Text Available The manufactured wood products are essential to modern society, since they are made from renewable and recyclable raw material, characterizing a sustainable input. The objective of this study was to elucidate the importance of wood from planted forests in forest products manufacture of higher added value, addressing forest and wood contexts of topics related to education, resources, products, industry, government incentives, public policies and markets. Different from Europe, it was verified that Brazil does not support positively this important industrial sector, nevertheless it still presents growth potential due to range of wooden-based products. Thus, wood could reach a prominent position in Brazilian economy, if strategies and incentives were defined by rules and public policies..

Climate seasonality limits leaf carbon assimilation and wood productivity in tropical forests

Science.gov (United States)

Fabien H. Wagner; Bruno Herault; Damien Bonal; Clement Stahl; Liana O. Anderson; Timothy R. Baker; Gabriel Sebastian Becker; Hans Beeckman; Danilo Boanerges Souza; Paulo Cesar Botosso; David M. J. S. Bowman; Achim Brauning; Benjamin Brede; Foster Irving Brown; Jesus Julio Camarero; Plinio Barbosa Camargo; Fernanda C. G. Cardoso; Fabricio Alvim Carvalho; Wendeson Castro; Rubens Koloski Chagas; Jerome Chave; Emmanuel N. Chidumayo; Deborah A. Clark; Flavia Regina Capellotto Costa; Camille Couralet; Paulo Henrique da Silva Mauricio; Helmut Dalitz; Vinicius Resende de Castro; Jacanan Eloisa de Freitas Milani; Edilson Consuelo de Oliveira; Luciano de Souza Arruda; Jean-Louis Devineau; David M. Drew; Oliver Dunisch; Giselda Durigan; Elisha Elifuraha; Marcio Fedele; Ligia Ferreira Fedele; Afonso Figueiredo Filho; Cesar Augusto Guimaraes Finger; Augusto Cesar Franco; Joao Lima Freitas Junior; Franklin Galvao; Aster Gebrekirstos; Robert Gliniars; Paulo Mauricio Lima de Alencastro Graca; Anthony D. Griffiths; James Grogan; Kaiyu Guan; Jurgen Homeier; Maria Raquel Kanieski; Lip Khoon Kho; Jennifer Koenig; Sintia Valerio Kohler; Julia Krepkowski; Jose Pires Lemos-Filho; Diana Lieberman; Milton Eugene Lieberman; Claudio Sergio Lisi; Tomaz Longhi Santos; Jose Luis Lopez Ayala; Eduardo Eijji Maeda; Yadvinder Malhi; Vivian R. B. Maria; Marcia C. M. Marques; Renato Marques; Hector Maza Chamba; Lawrence Mbwambo; Karina Liana Lisboa Melgaco; Hooz Angela Mendivelso; Brett P. Murphy; Joseph O' Brien; Steven F. Oberbauer; Naoki Okada; Raphael Pelissier; Lynda D. Prior; Fidel Alejandro Roig; Michael Ross; Davi Rodrigo Rossatto; Vivien Rossi; Lucy Rowland; Ervan Rutishauser; Hellen Santana; Mark Schulze; Diogo Selhorst; Williamar Rodrigues Silva; Marcos Silveira; Susanne Spannl; Michael D. Swaine; Jose Julio Toledo; Marcos Miranda Toledo; Marisol Toledo; Takeshi Toma; Mario Tomazello Filho; Juan Ignacio Valdez Hernandez; Jan Verbesselt; Simone Aparecida Vieira; Gregoire Vincent; Carolina Volkmer de Castilho; Franziska Volland; Martin Worbes; Magda Lea Bolzan Zanon; Luiz E. O. C. Aragao

2016-01-01

The seasonal climate drivers of the carbon cycle in tropical forests remain poorly known, although these forests account for more carbon assimilation and storage than any other terrestrial ecosystem. Based on a unique combination of seasonal pan-tropical data sets from 89 experimental sites (68 include aboveground wood productivity measurements and 35 litter...

An exploratory assessment of the attitudes of Chinese wood products manufacturers towards forest certification.

Science.gov (United States)

Chen, Juan; Innes, John L; Kozak, Robert A

2011-11-01

Interviews with Chinese forest products manufacturers were conducted to explore their attitudes towards forest certification and related issues. Participants comprised owners, CEOs, and managers in 20 Chinese wood products companies, including producers of furniture, doors, flooring, and various engineered wood products. The interviews were used to analyze the extent to which participants were considering adopting forest certification and what might motivate such a decision. This was done by assessing their awareness and knowledge of certification. The results indicated that participants' understanding of forest certification was extremely low, despite major efforts in China to raise awareness of the issue. Potential economic benefits were the most frequently cited reason to adopt certification, including gaining or maintaining competitive advantage over their industry counterparts, improved access to both domestic and export markets, better customer recognition, and enhanced corporate responsibility practices. Some interviewees (3 out of 20) considered that certification would become a mandatory requirement or industry standard, and that this would be the only viable motivation for certification given that the financial benefits were potentially limited. According to the participants, the main differences between certified and uncertified wood products operations related to improved market access and public image. Interviewees felt that cooperation between and support from governments and the forest industry would enable the enhanced awareness of certification amongst manufacturers and the general public. This, in turn, could serve to stimulate demand for certified products. Copyright © 2011 Elsevier Ltd. All rights reserved.

Estimates of carbon stored in harvested wood products from United States Forest Service Northern Region, 1906-2012

Science.gov (United States)

Keith Stockmann; Nathaniel Anderson; Jesse Young; Ken Skog; Sean Healey; Dan Loeffler; Edward Butler; J. Greg Jones; James Morrison

2014-01-01

Global forests capture and store significant amounts of carbon through photosynthesis. When carbon is removed from forests through harvest, a portion of the harvested carbon is stored in wood products, often for many decades. The United States Forest Service (USFS) and other agencies are interested in accurately accounting for carbon flux associated with harvested wood...

Estimates of carbon stored in harvested wood products from United States Forest Service Southern Region, 1911-2012

Science.gov (United States)

Dan Loeffler; Nathaniel Anderson; Keith Stockmann; Ken Skog; Sean Healey; J. Greg Jones; James Morrison; Jesse Young

2014-01-01

Global forests capture and store significant amounts of carbon through photosynthesis. When carbon is removed from forests through harvest, a portion of the harvested carbon is stored in wood products, often for many decades. The United States Forest Service (USFS) and other agencies are interested in accurately accounting for carbon flux associated with harvested wood...

Estimates of carbon stored in harvested wood products from United States Forest Service Intermountain Region, 1911-2012

Science.gov (United States)

Keith Stockmann; Nathaniel Anderson; Jesse Young; Ken Skog; Sean Healey; Dan Loeffler; Edward Butler; J. Greg Jones; James Morrison

2014-01-01

Global forests capture and store significant amounts of carbon through photosynthesis. When carbon is removed from forests through harvest, a portion of the harvested carbon is stored in wood products, often for many decades. The United States Forest Service (USFS) and other agencies are interested in accurately accounting for carbon flux associated with harvested wood...

Estimates of carbon stored in harvested wood products from United States Forest Service Eastern Region, 1911-2012

Science.gov (United States)

Dan Loeffler; Nathaniel Anderson; Keith Stockmann; Ken Skog; Sean Healey; J. Greg Jones; James Morrison; Jesse Young

2014-01-01

Global forests capture and store significant amounts of carbon through photosynthesis. When carbon is removed from forests through harvest, a portion of the harvested carbon is stored in wood products, often for many decades. The United States Forest Service (USFS) and other agencies are interested in accurately accounting for carbon flux associated with harvested wood...

Estimates of carbon stored in harvested wood products from United States Forest Service Alaska Region, 1910-2012

Science.gov (United States)

Dan Loeffler; Nathaniel Anderson; Keith Stockmann; Ken Skog; Sean Healey; J. Greg Jones; James Morrison; Jesse Young

2014-01-01

Global forests capture and store significant amounts of carbon through photosynthesis. When carbon is removed from forests through harvest, a portion of the harvested carbon is stored in wood products, often for many decades. The United States Forest Service (USFS) and other agencies are interested in accurately accounting for carbon flux associated with harvested wood...

Estimates of carbon stored in harvested wood products from United States Forest Service Southwestern Region, 1909-2012

Science.gov (United States)

Edward Butler; Keith Stockmann; Nathaniel Anderson; Jesse Young; Ken Skog; Sean Healey; Dan Loeffler; J. Greg Jones; James Morrison

2014-01-01

Global forests capture and store significant amounts of carbon through photosynthesis. When carbon is removed from forests through harvest, a portion of the harvested carbon is stored in wood products, often for many decades. The United States Forest Service (USFS) and other agencies are interested in accurately accounting for carbon flux associated with harvested wood...

Conservation value of low-productivity forests measured as the amount and diversity of dead wood and saproxylic beetles.

Science.gov (United States)

Hämäläinen, Aino; Strengbom, Joachim; Ranius, Thomas

2018-06-01

In many managed landscapes, low-productivity land comprises most of the remaining relatively untouched areas, and is often over-represented within protected areas. The relationship between the productivity and conservational value of a site is poorly known; however, it has been hypothesized that biodiversity increases with productivity due to higher resource abundance or heterogeneity, and that the species communities of low-productivity land are a nested subset of communities from more productive land. We tested these hypotheses for dead-wood-dependent beetles by comparing their species richness and composition, as well as the amount and diversity of dead wood, between low-productivity (potential forest growth dead wood, but volume appeared to be a better predictor than diversity for the higher species richness in set-asides. Beetle species composition was similar among stand types, and the assemblages in low-productivity stands were largely subsets of those in high-productivity set-asides. However, 11% of all species and 40% of red-listed species only occurred in high-productivity stands, while no species were unique to low-productivity stands. We conclude that low-productivity forests are less valuable for conservation than high-productivity forest land. Given the generally similar species composition among stand types, a comparable conservational effect could be obtained by setting aside a larger area of low-productivity forest in comparison to the high-productivity. In terms of dead wood volumes, 1.8-3.6 ha of low-productivity forest has the same value as 1 ha of unmanaged high-productivity forest. This figure can be used to estimate the conservation value of low-productivity forests; however, as high-productivity forests harbored some unique species, they are not completely exchangeable. © 2018 The Authors. Ecological Applications published by Wiley Periodicals, Inc. on behalf of Ecological Society of America.

Commercialization of non-wood forest products on the territory of AP Vojvodina

Directory of Open Access Journals (Sweden)

Keča Ljiljana

2012-01-01

Full Text Available In the previous utilization of natural resources in forestry as an economic activity, timber exploitation was always the dominant part, and the utilization of other forest products was partly neglected. Nowadays, non-wood forest products (NWFPs occupy an increasingly significant position in the forestry sector in numerous countries, so that the revenue from their utilization approaches the returns realized by the classical production of timber products. The research performed in Vojvodina, on the sample of six enterprises dealing with NWFP purchase, processing and sale was aimed at the analysis of their market activities to create the image of the market of this group of products. After the study data were analyzed by dynamic statistical methods, the changes in the activities on purchase, the domestic sales and export sales between 2004 and 2010 were presented and future projects were visualized. The research in the form of questionnaire included the quantities of purchased raw materials, the scope of production and sales, both in the domestic, and in foreign markets, as well as the prices of final products. Some species of medicinal plants were purchased on the territories of Croatia and Macedonia, and the purchasing network in the domestic market was remarkably wide and it included predominantly: Niš, Svrljig, Čoka, Apatin, Pančevo, Ruma, Boljevac, Kanjiža, etc. The most significant growth was realised in the purchase of a mixture of medicinal plants. Also significant are the purchased quantities of mint, which on average increased by 7.9 t and rose hip by 5.5 t per year. During the study period, the domestic sale of all species of herbal teas and medicinal plants increased significantly, while spices and honey were subject to a fluctuation in sales quantity. Average algebraic deviation of the original final NWFP sale value from the arithmetic mean accounts for 3.48%. With the significance level of 95%, it is estimated that the sale in

Carbon budget of Ontario's managed forests and harvested wood products, 2001–2100

Science.gov (United States)

Jiaxin Chen; Stephen J. Colombo; Michael T. Ter-Mikaelian; Linda S. Heath

2010-01-01

Forest and harvested wood products (HWP) carbon (C) stocks between 2001 and 2100 for Ontario's managed forests were projected using FORCARB-ON, an adaptation of the U.S. national forest C budget model known as FORCARB2. A fire disturbance module was introduced to FORCARB-ON to simulate the effects of wildfire on C, and some of the model's C pools were re-...

Estimates of carbon stored in harvested wood products from United States Forest Service Rocky Mountain Region, 1906-2012

Science.gov (United States)

Keith Stockmann; Nathaniel Anderson; Jesse Young; Ken Skog; Sean Healey; Dan Loeffler; Edward Butler; J. Greg Jones; James Morrison

2014-01-01

Global forests capture and store significant amounts of carbon through photosynthesis. When carbon is removed from forests through harvest, a portion of the harvested carbon is stored in wood products, often for many decades. The United States Forest Service (USFS) and other agencies are interested in accurately accounting for carbon flux associated with harvested wood...

Estimates of carbon stored in harvested wood products from United States Forest Service Pacific Northwest Region, 1909-2012

Science.gov (United States)

Edward Butler; Keith Stockmann; Nathaniel Anderson; Ken Skog; Sean Healey; Dan Loeffler; J. Greg Jones; James Morrison; Jesse Young

2014-01-01

Global forests capture and store significant amounts of carbon through photosynthesis. When carbon is removed from forests through harvest, a portion of the harvested carbon is stored in wood products, often for many decades. The United States Forest Service (USFS) and other agencies are interested in accurately accounting for carbon flux associated with harvested wood...

Estimates of carbon stored in harvested wood products from United States Forest Service Pacific Southwest Region, 1909-2012

Science.gov (United States)

Keith Stockmann; Nathaniel Anderson; Jesse Young; Ken Skog; Sean Healey; Dan Loeffler; Edward Butler; J. Greg Jones; James Morrison

2014-01-01

Global forests capture and store significant amounts of carbon through photosynthesis. When carbon is removed from forests through harvest, a portion of the harvested carbon is stored in wood products, often for many decades. The United States Forest Service (USFS) and other agencies are interested in accurately accounting for carbon flux associated with harvested wood...

Forest certification in Calabria (Italy: attitudes, preferences and willingness to pay of manufactures and enterprises of forest-wood chain

Directory of Open Access Journals (Sweden)

Paletto A

2017-04-01

Full Text Available Forest certification was born in the early 90s of the twentieth century in order to protect tropical and sub-tropical forests against a progressive deforestation and degradation. Forest certification is a valuable instrument for environmental protection and a useful tool of green marketing for forest-wood chain enterprises. In the last decades, in developed countries there has been increased consumer awareness of environmental protection and environmentally friendly wood products. This consumers’ attitude is related to the consumers’ willingness to pay a premium price for environmentally friendly wood products. In the international literature, some studies have investigated the consumers’ willingness to pay (WTP for several certified wood products with different prices, while few studies have analyzed the willingness to pay of manufactures and enterprises of forest-wood chain for certified wood products. In addition, in the international literature there is a knowledge gap concerning the manufactures or consumers’ willingness to pay for local wood products compared to equivalent products from other geographical areas. Starting from these considerations, the main aims of this study are: (1 to analyze the wood manufactures’ willingness to pay a premium price for certified wood products; (2 to investigate the wood manufactures’ attitudes and willingness to pay for regional/local wood products. The study was conducted as part of the “Ambi.Tec.Fil.Legno” project involving 127 manufactures and enterprises of forest-wood chain located in Calabria region. At the end of the questionnaire survey, the information provided by 40 manufactures and enterprises of forest-wood chain were processed and analyzed (response rate 31.5%. The results show that the main factors that influence the purchase decisions of enterprises are the trust in the seller and the durability of the product. Concerning the manufactures’ willingness to pay for certified

Fifteen years of international trade in wood and forest-related products

International Nuclear Information System (INIS)

Desclos, Pierre-Marie

2014-01-01

Little is generally known about international trade in forest-related products in spite of the fact that a significant portion of world production is exported. Two irreversible trends underlie international trade in forest-related products. One is globalization while the other is adding as much value as possible locally by processing the materials to the greatest extent possible in the country of origin. Some of the more surprising recent developments are the growth in trade in wood as a source of energy and the dependency of Europe on its massive imports in this area. International trade in forest-related products is a continually changing sector that follows developments in the technical, economic, social and political spheres. Its growth has been spectacular and will remain strong in coming years. The greatest potential for development will come from environmental management, improved logistics and innovation. (authors)

Testing painted wood : past practices at the Forest Products Laboratory and recommendations for future research

Science.gov (United States)

R. Sam Williams

2009-01-01

A brief history of paint research at the Forest Products Laboratory (FPL) in Madison, Wisconsin, sets the stage for a discussion of testing paint on wood and wood products. Tests include laboratory and outdoor tests, and I discuss them in terms of several degradation mechanisms (loss of gloss and fading, mildew growth, extractives bleed, and cracking, flaking, and...

Projected wood energy impact on US forest wood resources

Energy Technology Data Exchange (ETDEWEB)

Skog, K.E. [USDA Forest Service, Madison, WI (United States)

1993-12-31

The USDA Forest Service has developed long-term projections of wood energy use as part of a 1993 assessment of demand for and supply of resources from forest and range lands in the United States. To assess the impact of wood energy demand on timber resources, a market equilibrium model based on linear programming was developed to project residential, industrial, commercial, and utility wood energy use from various wood energy sources: roundwood from various land sources, primary wood products mill residue, other wood residue, and black liquor. Baseline projections are driven by projected price of fossil fuels compared to price of wood fuels and the projected increase in total energy use in various end uses. Wood energy use is projected to increase from 2.67 quad in 1986 to 3.5 quad in 2030 and 3.7 quad in 2040. This is less than the DOE National Energy Strategy projection of 5.5 quad in 2030. Wood energy from forest sources (roundwood) is projected to increase from 3.1 billion (10{sup 9}) ft{sup 3} in 1986 to 4.4. billion ft{sup 3} in 2030 and 4.8 billion ft{sup 3} in 2040 (88, 124 and 136 million m{sup 3}, respectively). This rate of increase of roundwood use for fuel -- 0.8 percent per year -- is virtually the same as the projected increase rate for roundwood for pulpwood. Pulpwood roundwood is projected to increase from 4.2 billion ft{sup 3} in 1986 to 6.0 billion ft{sup 3} in 2030 and 6.4 billion ft{sup 3} in 2040 (119, 170 and 183 million m{sup 3}, respectively).

Granulated wood ash to forest soil - Ecological effects

International Nuclear Information System (INIS)

Rosen, K.; Eriksson, H.; Clarholm, M.; Lundkvist, H.; Rudebeck, A.

1993-01-01

This report describes research concerning ecological effects of wood ash recycling to forest soils. The main part of the minerals in the wood fuels are retained in the ashes after combustion. By returning the ashes back to the cleared forest areas, the mineral losses can be reduced. Adding ashes and limestone is a method to vitalize acidified forest soils and restore the production capacity. 48 refs, 26 figs, 8 tabs

National and global greenhouse gas dynamics of different forest management and wood use scenarios: a model-based assessment

International Nuclear Information System (INIS)

Werner, Frank; Taverna, Ruedi; Hofer, Peter; Thuerig, Esther; Kaufmann, Edgar

2010-01-01

structural components; (4) waste wood that is not suitable for further use should be used to generate energy. Political strategies to solely increase the use of wood as a biofuel cannot be considered efficient from a climate perspective; (5) forest management strategies to enhance carbon sinks in forests via reduced harvesting are not only ineffective because of a compensatory increase in fossil fuel consumption for the production of non-wooden products and thermal energy but also because of the Kyoto-'cap' that limits the accountability of GHG removals by sinks under Article 3.3 and 3.4, at least for the first commitment period; (6) the effect of substitution through the material and energy use of wood is more significant and sustained as compared with the stock effects in wood products, which tend towards new steady-state flow equilibria with no further increase of C stocks; (7) from a global perspective, the effect of material substitution exceeds that of energy recovery from wood. In the Swiss context, however, the energy recovery from wood generates a greater substitution effect than material substitution.

Non-timber forest products and forest stewardship plans

Science.gov (United States)

Becky Barlow; Tanner Filyaw; Sarah W. Workman

2015-01-01

To many woodland owners “harvesting” typically means the removal of timber from forests. In recent years many landowners have become aware of the role non-timber forest products (NTFPs) can play in supplemental management strategies to produce income while preserving other forest qualities. NTFPs are a diverse group of craft, culinary, and medicinal products that have...

Certification of forests and wood products in Serbia in the context of new European union legislations: Current situation, problems and challenges

Directory of Open Access Journals (Sweden)

Vasiljević Aleksandar

2011-01-01

Full Text Available The paper presents research results of the current situation in the area of certification of forests and wood products in Serbia in the context of new European Union legislation referring to the placement of wood and wood products on this market. The objective of the research was to observe the situation, phases which Serbia implemented in the process of forest and wood products certification until now, as well as the problems and challenges the companies in this process face. Based on research results, future development of the market of certified wood products in Serbia was assessed and the proposal of measures which should be realized in order for Serbia to become a country whose companies will be ready for the moment when provisions and measures of the new EU legislation become effective was given. The selection of the abovementioned objective was conditioned by the fact that from January 1st, 2013 new legislation takes effect, with significantly stricter terms for the placement of wood and wood products from other countries on this market. One of the conditions which will have to be fulfilled by the companies wishing to export their products on this market refers to proving their origin. Since the EU is the most significant market for wood products exported from Serbia, fulfillment of the stated and other terms from the new EU legislation is of great importance to Serbian companies. Until the beginning of September 2010, only 387,000 ha were certified, namely 17.2% of the total area under forests. In the same period, only 33 wood processing companies in Serbia possessed CoC certificates for their products. Such a small number of companies possessing certificates for their wood products compared to competitive neighboring countries can represent a serious limitation in achieving their satisfactory competitiveness on the EU market in the following period.

Non_standard Wood

DEFF Research Database (Denmark)

Tamke, Martin

. Using parametric design tools and computer controlled production facilities Copenhagens Centre for IT and Architecture undertook a practice based research into performance based non-standard element design and mass customization techniques. In close cooperation with wood construction software......, but the integration of traditional wood craft techniques. The extensive use of self adjusting, load bearing wood-wood joints contributed to ease in production and assembly of a performance based architecture....

economic assessment of two selected non-timber forest products in ...

African Journals Online (AJOL)

Aladex

forest product commonly used for domestic and industrial energy generation. ... continue to depend on wood because bringing oil, gas and electricity within their .... coppicing and coppice trees are normally harvested in rotational patches ...

Projecting biodiversity and wood production in future forest landscapes: 15 key modeling considerations.

Science.gov (United States)

Felton, Adam; Ranius, Thomas; Roberge, Jean-Michel; Öhman, Karin; Lämås, Tomas; Hynynen, Jari; Juutinen, Artti; Mönkkönen, Mikko; Nilsson, Urban; Lundmark, Tomas; Nordin, Annika

2017-07-15

A variety of modeling approaches can be used to project the future development of forest systems, and help to assess the implications of different management alternatives for biodiversity and ecosystem services. This diversity of approaches does however present both an opportunity and an obstacle for those trying to decide which modeling technique to apply, and interpreting the management implications of model output. Furthermore, the breadth of issues relevant to addressing key questions related to forest ecology, conservation biology, silviculture, economics, requires insights stemming from a number of distinct scientific disciplines. As forest planners, conservation ecologists, ecological economists and silviculturalists, experienced with modeling trade-offs and synergies between biodiversity and wood biomass production, we identified fifteen key considerations relevant to assessing the pros and cons of alternative modeling approaches. Specifically we identified key considerations linked to study question formulation, modeling forest dynamics, forest processes, study landscapes, spatial and temporal aspects, and the key response metrics - biodiversity and wood biomass production, as well as dealing with trade-offs and uncertainties. We also provide illustrative examples from the modeling literature stemming from the key considerations assessed. We use our findings to reiterate the need for explicitly addressing and conveying the limitations and uncertainties of any modeling approach taken, and the need for interdisciplinary research efforts when addressing the conservation of biodiversity and sustainable use of environmental resources. Copyright © 2017 Elsevier Ltd. All rights reserved.

Non-timber forest products in sustainable forest management

Science.gov (United States)

James L. Chamberlain; A.L. Hammett; Philip A. Araman

2001-01-01

The forests of Southern United States are the source of many non-timber forest products (NTFPs). The collection, trade and use of these products have been important to rural economies since Europeans settled in this country. At the same time the plants from which these products originate are crucial to healthy ecosystems. Over the last decade, the market demand and the...

Water for wood products versus nature, food or feed

Science.gov (United States)

Schyns, Joep; Booij, Martijn; Hoekstra, Arjen

2017-04-01

Forests play a central interlinked role in the 2030 Agenda on Sustainable Development. The Agenda aims at an increased share of renewable energy in the global energy mix (target 7.2) and restoration and sustainable management of forests (targets 6.6, 15.1 & 15.2). Forests also play a key role in the hydrological cycle accounting for the largest water flux from land to atmosphere. However, we do not know which part of this is used for the production of wood products such as lumber, pulp and paper, firewood or biofuel. SDG target 6.4 calls for increased water-use efficiency across all sectors and requires understanding the competing demands for water and the potential conflicts between wood production and other purposes like food (SDG 2). To reach the SDGs we need to understand the interlinkages between the SDGs and know how much water is used in the forestry sector. We provide the first estimate of global water use in the forestry sector, using the water footprint (WF) as indicator and distinguishing between consumption of green water (precipitation) and blue water (groundwater through capillary rise). We estimate forest evaporation at a high spatial resolution level and attribute total water consumption to the various forest products, including ecosystem services. Global water consumption for wood production increased by 34% over 50 years to 290x109 m3/y in 2001-2010. Wood has a higher economic water productivity (EWP, US/m3) than common food or feed crops like wheat, maize and sugar beet, and bio-ethanol from wood has a small WF per unit of energy compared to first-generation bio-ethanol from these three crops. Counterintuitively, extensive wood production has a smaller WF and hence a higher EWP than intensive wood production. The reason is that extensively exploited forests host relatively more value next to wood production in the form of other ecosystem services. Recycling of wood products could effectively reduce the WF of the forestry sector, thereby leaving

Wood products research in the USA

Science.gov (United States)

Theodore Wegner

2010-01-01

Forest biomass conversion to biofuels and other value-added co-products; hyper-performance advanced composites custom tailored to end use requirements; advanced high performance wood-based structures; and nanomaterials and nano-enable high performance products from wood represent important research and development investment areas for the successful transformation of...

Forest Products Laboratory : supporting the nation's armed forces with valuable wood research for 90 years

Science.gov (United States)

Christopher D. Risbrudt; Robert J. Ross; Julie J. Blankenburg; Charles A. Nelson

2007-01-01

Founded in 1910 by the U.S. Forest Service to serve as a centralized, national wood research laboratory, the USDA Forest Products Laboratory (FPL) has a long history of providing technical services to other government agencies, including those within the Defense (DoD). A recent search of FPL’s library and correspondence files revealed that approximately 10,000...

Wood supply : what bioenergy resources are available as harvest residue and non-merchantable wood in New Brunswick?

International Nuclear Information System (INIS)

Forgrave, K.

2005-01-01

This paper examines resources available for bioenergy production in New Brunswick. An estimate of New Brunswick harvest levels, based on New Brunswick Forest Products Association web site figures was presented. Private wood lots harvest levels were also provided, with all estimates based on volume per year. Market conditions were discussed, with an emphasis on the dictates of price and availability for private wood lot owners. Market conditions and unused volume statistics were discussed. Various forest management options include the use of veneer, saw log, stud wood and pulp wood. Details of bioenergy percentages and potential were presented and general silviculture issues were discussed. It was concluded that many of the trade-offs of bioenergy involve placing more demands on forests, and that purchase prices will increasingly dictate volumes obtained from private wood lots. tabs, figs

Meta-analysis of greenhouse gas displacement factors of wood product substitution

International Nuclear Information System (INIS)

Sathre, Roger; O'Connor, Jennifer

2010-01-01

A displacement factor can express the efficiency of using biomass to reduce net greenhouse gas (GHG) emission, by quantifying the amount of emission reduction achieved per unit of wood use. Here we integrate data from 21 different international studies in a meta-analysis of the displacement factors of wood products substituted in place of non-wood materials. We calculate the displacement factors in consistent units of tons of carbon (tC) of emission reduction per tC in wood product. The displacement factors range from a low of -2.3 to a high of 15, with most lying in the range of 1.0 to 3.0. The average displacement factor value is 2.1, meaning that for each tC in wood products substituted in place of non-wood products, there occurs an average GHG emission reduction of approximately 2.1 tC. Expressed in other units, this value corresponds to roughly 3.9 t CO 2 eq emission reduction per ton of dry wood used. The few cases of negative displacement factors are the result of worst-case scenarios that are unrealistic in current practice. This meta-analysis quantifies the range of GHG benefits of wood substitution, and provides a clear climate rationale for increasing wood substitution in place of other products, provided that forests are sustainably managed and that wood residues are used responsibly.

Meta-analysis of greenhouse gas displacement factors of wood product substitution

Energy Technology Data Exchange (ETDEWEB)

Sathre, Roger [Ecotechnology, Mid Sweden University, 83125 Ostersund (Sweden); O' Connor, Jennifer [FPInnovations-Forintek, Vancouver, BC, Canada V6T 1W5 (Canada)

2010-04-15

A displacement factor can express the efficiency of using biomass to reduce net greenhouse gas (GHG) emission, by quantifying the amount of emission reduction achieved per unit of wood use. Here we integrate data from 21 different international studies in a meta-analysis of the displacement factors of wood products substituted in place of non-wood materials. We calculate the displacement factors in consistent units of tons of carbon (tC) of emission reduction per tC in wood product. The displacement factors range from a low of -2.3 to a high of 15, with most lying in the range of 1.0 to 3.0. The average displacement factor value is 2.1, meaning that for each tC in wood products substituted in place of non-wood products, there occurs an average GHG emission reduction of approximately 2.1 tC. Expressed in other units, this value corresponds to roughly 3.9 t CO{sub 2} eq emission reduction per ton of dry wood used. The few cases of negative displacement factors are the result of worst-case scenarios that are unrealistic in current practice. This meta-analysis quantifies the range of GHG benefits of wood substitution, and provides a clear climate rationale for increasing wood substitution in place of other products, provided that forests are sustainably managed and that wood residues are used responsibly.

Air quality and composite wood products

Science.gov (United States)

Melissa G. D. Baumann

1999-01-01

Research at the USDA Forest Service, Forest Products Laboratory (FPL) is being conducted to identify the compounds emitted from wood products during their manufacture and subsequent use. The FPL researchers are measuring the types and quantities of VOCs that are emitted from particleboard and MDF products to provide quantitative emissions information. This information...

Forest industry wood fuel supply

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-01

The potential for wood fired energy production in the UK is significant. Large scale developments are currently underway which could utilise over 100,000 green tonnes of forest residues. The fuel supply chain is likely to be complicated and there are perceived risks in its organisation and security. This report sets out to address some of these perceived risks and suggest suitable measures to reduce it. Six areas of the fuel supply chain have been studied, namely; Extraction, Comminution, Transport, Assessment and payment of wood fuel; Environmental impact; Nutrient recycling (ash disposal). (author)

Synergy and contradictions between wood production and ecosystem services supplied to society - the case of private forests

International Nuclear Information System (INIS)

Picard, Olivier

2012-01-01

Today, private foresters earn their income almost exclusively from the sale of wood, with a turnover of 105 Euro/ha. Ecosystem services could generate a value of 970 euros/ha/year, i.e. eight times the forestry income derived from timber. The question therefore arises: can these services supplement forest income or do they interfere with the production of wood? Foresters are faced with choices that are becoming increasingly complex, uncertain, risky and sometimes conflicting. They are of several kinds: legal, economic, environmental, social, technical, climatic, etc. Are they in a position to produce timber using appropriate silvicultural techniques while at the same time providing the services that society is demanding? Faced with these new challenges, what is the guidance that should be given to foresters? To develop messages that make sense to foresters, the 'Forestiers prives de France' (private owners) federation and the CNPF (National Centre for Forest Property) conducted a survey on forest owners called the ReSOFOp. (authors)

Species composition and forest structure explain the temperature sensitivity patterns of productivity in temperate forests

Directory of Open Access Journals (Sweden)

F. J. Bohn

2018-03-01

Full Text Available Rising temperatures due to climate change influence the wood production of forests. Observations show that some temperate forests increase their productivity, whereas others reduce their productivity. This study focuses on how species composition and forest structure properties influence the temperature sensitivity of aboveground wood production (AWP. It further investigates which forests will increase their productivity the most with rising temperatures. We described forest structure by leaf area index, forest height and tree height heterogeneity. Species composition was described by a functional diversity index (Rao's Q and a species distribution index (ΩAWP. ΩAWP quantified how well species are distributed over the different forest layers with regard to AWP. We analysed 370 170 forest stands generated with a forest gap model. These forest stands covered a wide range of possible forest types. For each stand, we estimated annual aboveground wood production and performed a climate sensitivity analysis based on 320 different climate time series (of 1-year length. The scenarios differed in mean annual temperature and annual temperature amplitude. Temperature sensitivity of wood production was quantified as the relative change in productivity resulting from a 1 °C rise in mean annual temperature or annual temperature amplitude. Increasing ΩAWP positively influenced both temperature sensitivity indices of forest, whereas forest height showed a bell-shaped relationship with both indices. Further, we found forests in each successional stage that are positively affected by temperature rise. For such forests, large ΩAWP values were important. In the case of young forests, low functional diversity and small tree height heterogeneity were associated with a positive effect of temperature on wood production. During later successional stages, higher species diversity and larger tree height heterogeneity were an advantage. To achieve such a

Species composition and forest structure explain the temperature sensitivity patterns of productivity in temperate forests

Science.gov (United States)

Bohn, Friedrich J.; May, Felix; Huth, Andreas

2018-03-01

Rising temperatures due to climate change influence the wood production of forests. Observations show that some temperate forests increase their productivity, whereas others reduce their productivity. This study focuses on how species composition and forest structure properties influence the temperature sensitivity of aboveground wood production (AWP). It further investigates which forests will increase their productivity the most with rising temperatures. We described forest structure by leaf area index, forest height and tree height heterogeneity. Species composition was described by a functional diversity index (Rao's Q) and a species distribution index (ΩAWP). ΩAWP quantified how well species are distributed over the different forest layers with regard to AWP. We analysed 370 170 forest stands generated with a forest gap model. These forest stands covered a wide range of possible forest types. For each stand, we estimated annual aboveground wood production and performed a climate sensitivity analysis based on 320 different climate time series (of 1-year length). The scenarios differed in mean annual temperature and annual temperature amplitude. Temperature sensitivity of wood production was quantified as the relative change in productivity resulting from a 1 °C rise in mean annual temperature or annual temperature amplitude. Increasing ΩAWP positively influenced both temperature sensitivity indices of forest, whereas forest height showed a bell-shaped relationship with both indices. Further, we found forests in each successional stage that are positively affected by temperature rise. For such forests, large ΩAWP values were important. In the case of young forests, low functional diversity and small tree height heterogeneity were associated with a positive effect of temperature on wood production. During later successional stages, higher species diversity and larger tree height heterogeneity were an advantage. To achieve such a development, one could plant

Recommendations for sustainable development of non-timber forest products

Science.gov (United States)

Gina H. Mohammed

2001-01-01

Non-timber forest products--or NTFPs--are considered here to be botanical products harvested or originating from forest-based species, but excluding primary timber products, industrial boards and composites, and paper products. A recent study of non-timber forest products in Ontario, Canada, identified at least 50 types of NTFPs and hundreds of specific products used...

Estimating Preferences for Wood Products with Environmental Attributes

Directory of Open Access Journals (Sweden)

Masaji Sakagami

2018-01-01

Full Text Available Tropical deforestation and forest degradation are serious problems for the global environment; as a result, sustainable forest management and forest certification have become important. In this study, using a choice experiment, we investigated, on the demand side, consumers’ preferences and willingness to pay (WTP for certified wood products that attempt to address public concerns regarding deforestation and forest degradation. Specifically, we investigated how estimates of consumers’ preferences and WTP were influenced by product attributes such as quality, certification, and price. To the authors’ knowledge, few studies of this kind have been conducted, particularly in Japan. The study’s main finding was that Japanese consumers were willing to pay a premium for certified wood products with attributes related to sustainable forest management; most preferred were products with attributes related to preserving biodiversity. These findings indicate that consumers are willing to pay a premium for products that contribute to solving the problems of deforestation and forest degradation.

Forest ecosystem services: Provisioning of non-timber forest products

Science.gov (United States)

James L. Chamberlain; Gregory E. Frey; C. Denise Ingram; Michael G. Jacobson; Cara Meghan Starbuck Downes

2017-01-01

The purpose of this chapter is to describe approaches to calculate a conservative and defensible estimate of the marginal value of forests for non-timber forest products (NTFPs). 'Provisioning" is one of four categories of benefits, or services that ecosystems provide to humans and was described by the Millennium Ecosystem Assessment as 'products...

Non-timber forest products: alternative multiple-uses for sustainable forest management

Science.gov (United States)

James L. Chamberlain; Mary Predny

2003-01-01

Forests of the southern United States are the source of a great diversity of flora, much of which is gathered for non-timber forest products (NTFPs). These products are made from resources that grow under the forest canopy as trees, herbs, shrubs, vines, moss and even lichen. They occur naturally in forests or may be cultivated under the forest canopy or in...

Energy and industrial wood harvesting from young forests; Energia- ja ainespuun korjuu nuorista metsistae

Energy Technology Data Exchange (ETDEWEB)

Rieppo, K.; Mutikainen, A.; Jouhiaho, A. (eds.)

2011-07-01

In the METKA Forest Energy Profitably project TTS (Work Efficiency Institute) compared methods suitable for the harvesting of energy wood and industrial wood. During the thinning of a young forest by a forest worker, the whole-tree logging method was one-third less expensive than the pulpwood method, including terrain transport. In harvesting whole trees as part of the thinning of young forests, methods based on combinations of manual and mechanized workproved to be several dozen per cent less expensive than the entirely mechanized method. When cutting energy wood with a Harveri small harwarder productivity was slightly higher when using 40-metre distances two cutting trails than when using 20-metre distances. When using a Tehojaetkae small harvester, creating two cutting trails in addition to the standard four-metre-wide cutting trail resulted in slightly higher productivity than creating three narrow cutting trails. A Risutec L3A energy head was used in tests involving both clearing and energy wood cutting. This method proved to be very promising, and it seems highly proable that advance clearing will no longer be needed in energy wood harvesting under all circumstances. When using traditional harvester-forwarder chains and a harvarder for first thinning in pine stands, the harvesting of entirely or partly non-delimbed trees was 20 to 40 per cent less expensive per harvested cubic meter than the harvesting of delimbed trees. In tests carried out using the Naarva RS25 harvester head for first thinning in pine stands, the integrated method resulted in approximately one-third productivity than the traditional cutting of industrial wood. In a spruce-dominant site with delayed first thinning, the unit costs of harvesting delimbed energy wood were 16 per cent lower than those of the harvesting of pulpwood. In the future development of machinery, it will be important to aim at continuous motion, at least in terms of cutting small trees. (orig.)

Sustainable bioenergy production from Missouri's Ozark forests

Science.gov (United States)

Henry E. Stelzer; Chris Barnett; Verel W. Bensen

2008-01-01

The main source of wood fiber for energy resides in Missouri's forests. Alternative bioenergy systems that can use forest thinning residues are electrical energy, thermal energy, and liquid bio-fuel. By applying a thinning rule and accounting for wood fiber that could go into higher value wood products to all live biomass data extracted from the U.S. Forest...

Occurrence patterns of dead wood and wood-dependent lichens in managed boreal forest landscapes

OpenAIRE

Svensson, Måns

2013-01-01

Dead wood is a key resource for biodiversity, on which thousands of forest organisms are dependent. Because of current forest management, there has been a large-scale change in dead wood amounts and qualities, and consequently, many wood-dependent species are threatened. The general aim of this thesis is to increase our understanding of habitat requirements and occurrence patterns of wood-dependent lichens in managed, boreal forest landscapes. We surveyed dead wood and wood-dependent lichens ...

Preservation of forest wood chips

Energy Technology Data Exchange (ETDEWEB)

Kofman, P.D.; Thomsen, I.M.; Ohlsson, C.; Leer, E.; Ravn Schmidt, E.; Soerensen, M.; Knudsen, P.

1999-01-01

As part of the Danish Energy Research Programme on biomass utilisation for energy production (EFP), this project concerns problems connected to the handling and storing of wood chips. In this project, the possibility of preserving wood chips of the Norway Spruce (Picea Abies) is addressed, and the potential improvements by anaerobic storage are tested. Preservation of wood chips aims at reducing dry matter losses from extensive heating during storage and to reduce production of fungal spores. Fungal spores pose a health hazards to workers handling the chips. Further the producers of wood chips are interested in such a method since it would enable them to give a guarantee for the delivery of homogeneous wood chips also during the winter period. Three different types of wood chips were stored airtight and further one of these was stored in accordance with normal practise and use as reference. The results showed that airtight storage had a beneficial impact on the quality of the chips: no redistribution of moisture, low dry matter losses, unfavourable conditions for microbial activity of most fungi, and the promotion of yeasts instead of fungi with airborne spores. Likewise the firing tests showed that no combustion problems, and no increased risk to the environment or to the health of staff is caused by anaerobic storage of wood chips. In all, the tests of the anaerobic storage method of forest wood chips were a success and a large-scale test of the method will be carried out in 1999. (au)

Understanding key issues of sustainable wood production in the Pacific Northwest.

Science.gov (United States)

Robert L. Deal; Seth M. White

2005-01-01

Researchers involved with the Pacific Northwest (PNW) Research Station Sustainable Wood Production Initiative have outlined some of the barriers and opportunities for sustainable wood production in the region. Sustainable wood production is defined as the capacity of forests to produce wood, products, and services on a long-term basis and in the context of human...

Modeling future U.S. forest sector market and trade impacts of expansion in wood energy consumption

Science.gov (United States)

Peter J. Ince; Andrew D. Kramp; Kenneth E. Skog; Do-il Yoo; V. Alaric Sample

2011-01-01

This paper describes an approach to modeling U.S. forest sector market and trade impacts of expansion in domestic wood energy consumption under hypothetical future U.S. wood biomass energy policy scenarios. The U.S. Forest Products Module (USFPM) was created to enhance the modeling of the U.S. forest sector within the Global Forest Products Model (GFPM), providing a...

The economic efficiency of forest energy wood chip production in regional use – A case study

Directory of Open Access Journals (Sweden)

Dalibor Šafařík

2013-01-01

Full Text Available This regional project case study deals with the limiting factors of economic efficiency in the production of forest energy wood chips. The evaluation of production efficiency made use of data obtained from the Lesy města Brna, a.s. (Forest of the City of Brno, Corp., which were subjected to two static methods of investment evaluation: an analysis of the tipping point and determination of the limit of variable costs and a dynamic modified tipping point analysis using cash flow (i.e. cash break even analysis. The results have confirmed an established hypothesis, namely that the decisive factor in the profitability of the production of forest energy wood chips hinges on the costs incurred in the gathering of raw material and the distribution of the produced chips. The results include a further limiting factor: transportation costs to the final consumption location. The output of the study is a recommendation that the concentration of residual forest materials not exceed a distance of 250 m from the place of production to the point of disintegration and that the transport distance of energy chips not exceed 50 km from the place of disintegration to the final consumption point. These limiting values help quantify the full internal costs per cost unit, full internal cost profitability, total revenue profitability and annual profitability expressed in terms of fixed assets depreciation without factoring in financial aid.

Forest biomass and wood waste resources

Science.gov (United States)

K. Skog; P. Lebow; D.. Dykstra; P.. Miles; B.J. Stokes; R.D. Perlack; M. Buford; J. Barbour; D. McKeever

2011-01-01

This chapter provides estimates of forest biomass and wood waste quantities, as well as roadside costs (i.e., supply curves) for each county in the contiguous United States. Roadside price is the price a buyer pays for wood chips at a roadside in the forest, at a processing mill location in the case of mill residue, or at a landfill for urban wood wastes prior to any...

Non-timber forest products in Hawaii

Science.gov (United States)

Katie Kamelamela; James B. Friday; Tamara Ticktin; Ashley. Lehman

2015-01-01

Hawaiian forests provide a wide array of non-timber forest products for both traditional and modern uses. Flowers, vines, and ferns are collected for creating garlands or lei for hula dances and parades. Lei made from materials gathered in the forest are made for personal use and sold, especially during graduation times. Bamboo is harvested for structures and for...

Bee pollen as non-wood forest product in the eastern Andean highlands of Colombia

Directory of Open Access Journals (Sweden)

Fermín José Chamorro García

2013-07-01

Full Text Available The Andean forests of the Eastern Andean high-lands of Colombia have a high conservation priority given the vulnerable condition of species such as Quercus humboldtii (Fagaceae that inhabit these ecosystems. Beekeeping is regarded as an alternative activity that could play a role in the conservation of Andean forests, but little is known about how the floras of these ecosystems contribute to honey and bee pollen production. We analyzed the contribution of Andean forests to bee pollen production, given the productive potential and commercial importance of this product. Pollen analyses were performed on 25 samples from apiaries near Andean forests located in the states of Cundinamarca, Boyacá and Santander. We found that Q. humboldtii is an important source of pollen with high potential for monofloral bee pollen production. In addition, bees collect pollen from other Andean forests species such as Weinmannia tomentosa, Viburnum spp. and Morella spp. Utilization of bee pollen could lead to incentives to carry out forest conservation practices through beekeeping management.

Wood for energy production. Technology - environment - economy

International Nuclear Information System (INIS)

Serup, H.; Falster, H.; Gamborg, C.

1999-01-01

'Wood for Energy Production', 2nd edition, is a readily understood guide to the application of wood in the Danish energy supply. The first edition was named 'Wood Chips for Energy Production'. It describes the wood fuel from forest to consumer and provides a concise introduction to technological, environmental, and financial matters concerning heating systems for farms, institutions, district heating plants, and CHP plants. The individual sections deal with both conventional, well known technology, as well as the most recent technological advances in the field of CHP production. The purpose of this publication is to reach the largest possible audiance, and it is designed so that the layman may find its background information of special relevance. 'Wood for Energy Production' is also available in German and Danish. (au)

Wood for energy production. Technology - environment - economy

Energy Technology Data Exchange (ETDEWEB)

Serup, H.; Falster, H.; Gamborg, C. [and others

1999-10-01

`Wood for Energy Production`, 2nd edition, is a readily understood guide to the application of wood in the Danish energy supply. The first edition was named `Wood Chips for Energy Production`. It describes the wood fuel from forest to consumer and provides a concise introduction to technological, environmental, and financial matters concerning heating systems for farms, institutions, district heating plants, and CHP plants. The individual sections deal with both conventional, well known technology, as well as the most recent technological advances in the field of CHP production. The purpose of this publication is to reach the largest possible audiance, and it is designed so that the layman may find its background information of special relevance. `Wood for Energy Production` is also available in German and Danish. (au)

Long-term influence of alternative forest management treatments on total ecosystem and wood product carbon storage

Science.gov (United States)

Joshua J. Puhlick; Aaron R. Weiskittel; Ivan J. Fernandez; Shawn Fraver; Laura S. Kenefic; Robert S. Seymour; Randall K. Kolka; Lindsey E. Rustad; John C. Brissette

2016-01-01

Developing strategies for reducing atmospheric CO2 is one of the foremost challenges facing natural resource professionals today. The goal of this study was to evaluate total ecosystem and harvested wood product carbon (C) stocks among alternative forest management treatments (selection cutting, shelterwood cutting, commercial clearcutting, and...

Estimates of carbon stored in harvested wood products from United States Forest Service's Sierra Nevada Bio-Regional Assessment Area of the Pacific Southwest Region, 1909-2012

Science.gov (United States)

Keith Stockmann; Nathaniel Anderson; Jesse Young; Ken Skog; Sean Healey; Dan Loeffler; Edward Butler; J. Greg Jones; James Morrison

2014-01-01

Global forests capture and store significant amounts of carbon through photosynthesis. When carbon is removed from forests through harvest, a portion of the harvested carbon is stored in wood products, often for many decades. The United States Forest Service (USFS) and other agencies are interested in accurately accounting for carbon flux associated with harvested wood...

Forest management strategies for producing wood for energy from conventional forestry systems

Energy Technology Data Exchange (ETDEWEB)

Sabourin, M.; Puttock, G.D. (Silv-Econ Ltd., Newmarket, ON (CA)); Richardson, J. (Forestry Canada, Science and Sustainable Development, Ottowa, ON (CA))

1992-01-01

The report reviews the current developments in forest management planning and practices to integrate the production of biomass for energy along with more conventional forest management goals. Efforts are under way to adapt management practices and silvicultural treatments to biomass production. These begin at the planning stage with the development of management tools and more accurate forest inventory data. They include silvicultural treatments such as shelterwood thinning in mixed wood stands and the interplanting of various tree species with the dual purpose of producing energy wood and conventional forest products. Three systems are available for recovering residues at time of final harvesting. The postharvest recovery of residues area is commonly used in Europe but is generally uneconomic in North America where the harvesting of small stems and integrated harvesting are favoured. (author).

The value chain of non-wood forest products as a component of development of the forestry sector in a part of South Serbia

Directory of Open Access Journals (Sweden)

Keča Ljiljana

2015-01-01

Full Text Available The value chain represents a detailed outline of the process that a product or service passes from raw materials, production and distribution to the consumer. The aim of this article is that within the analyzed companies in the area of the statistical region of South Serbia determined the dynamics of purchasing and marketing of non-wood forest products (NWFPs, and their value. The purpose of this research is to examine the possibilities for the development of small and medium-sized enterprises (SMEs towards sustainable use of NWFPs in a part of the territory of South Serbia. The subjects of the research are: purchased and sold quantities in analyzed companies, as well as the prices of these products in the market. The research was conducted in the territory of the dominant Pcinja, and they included 19 companies engaged in purchasing, processing and sale of NTFPs. The purchase of forest raspberries, wild strawberries and blackberries and herbs is represented within the Pcinja District. The highest average annual growth rates were recorded in the sales of products with added value of dog rose (Rosa canina and cornelian (Cornus mas. Export oriented enterprises in this area are at a low level. The total gross revenue earned by the placement of the selected final NWFPs in the domestic market was about 6,315,710 €. [Projekat Ministarstva nauke Republike Srbije, br. 37008: Održivo gazdovanje ukupnim potencijalima šuma u Republici Srbiji, i br. TP 31041: Šumski zasadi u funkciji povećanja pošumljenosti Srbije

Non-timber forest product extraction as a productive bricolage process

NARCIS (Netherlands)

Ros-Tonen, M.; Arts, B.; van Bommel, S.; Ros-Tonen, M.; Verschoor, G.

2012-01-01

This chapter explores the usefulness of the ‘productive bricolage’ concept, coined by Croll and Parkin (1992) and further elaborated by Batterbury (2001), in understanding the role of non-timber forest products (NTFPs) in people’s livelihoods and the forested landscape. I argue that NTFP extraction

Productivity of aboveground coarse wood biomass and stand age related to soil hydrology of Amazonian forests in the Purus-Madeira interfluvial area

Science.gov (United States)

Cintra, B. B. L.; Schietti, J.; Emillio, T.; Martins, D.; Moulatlet, G.; Souza, P.; Levis, C.; Quesada, C. A.; Schöngart, J.

2013-04-01

The ongoing demand for information on forest productivity has increased the number of permanent monitoring plots across the Amazon. Those plots, however, do not comprise the whole diversity of forest types in the Amazon. The complex effects of soil, climate and hydrology on the productivity of seasonally waterlogged interfluvial wetland forests are still poorly understood. The presented study is the first field-based estimate for tree ages and wood biomass productivity in the vast interfluvial region between the Purus and Madeira rivers. We estimate stand age and wood biomass productivity by a combination of tree-ring data and allometric equations for biomass stocks of eight plots distributed along 600 km in the Purus-Madeira interfluvial area that is crossed by the BR-319 highway. We relate stand age and wood biomass productivity to hydrological and edaphic conditions. Mean productivity and stand age were 5.6 ± 1.1 Mg ha-1 yr-1 and 102 ± 18 yr, respectively. There is a strong relationship between tree age and diameter, as well as between mean diameter increment and mean wood density within a plot. Regarding the soil hydromorphic properties we find a positive correlation with wood biomass productivity and a negative relationship with stand age. Productivity also shows a positive correlation with the superficial phosphorus concentration. In addition, superficial phosphorus concentration increases with enhanced soil hydromorphic condition. We raise three hypotheses to explain these results: (1) the reduction of iron molecules on the saturated soils with plinthite layers close to the surface releases available phosphorous for the plants; (2) the poor structure of the saturated soils creates an environmental filter selecting tree species of faster growth rates and shorter life spans and (3) plant growth on saturated soil is favored during the dry season, since there should be low restrictions for soil water availability.

Users guide for WoodCite, a product cost quotation tool for wood component manufacturers [computer program

Science.gov (United States)

Jeff Palmer; Adrienn Andersch; Jan Wiedenbeck; Urs. Buehlmann

2014-01-01

WoodCite is a Microsoft® Access-based application that allows wood component manufacturers to develop product price quotations for their current and potential customers. The application was developed by the U.S. Forest Service and Virginia Polytechnic Institute and State University, in cooperation with the Wood Components Manufacturers Association.

Wood for energy production. Technology - environment - economy[Denmark

Energy Technology Data Exchange (ETDEWEB)

Serup, H.; Falster, H.; Gamborg, C. [and others

1999-07-01

'Wood for Energy Production', 2nd edition, is a readily understood guide to the application of wood in the Danish energy supply. The first edition was named 'Wood Chips for Energy Production'. It describes the wood fuel from forest to consumer and provides a concise introduction to technological, environmental, and financial matters concerning heating systems for farms, institutions, district heating plants, and CHP plants. The individual sections deal with both conventional, well known technology, as well as the most recent technological advances in the field of CHP production. The purpose of this publication is to reach the largest possible audiance, and it is designed so that the layman may find its background information of special relevance. 'Wood for Energy Production' is also available in German and Danish. (au)

Wood-energy market impact on competition, procurement practices, and profitability of landowners and forest products industry in the U.S. south

International Nuclear Information System (INIS)

Conrad, Joseph L. IV.; Bolding, M. Chad; Smith, Robert L.; Aust, W. Michael

2011-01-01

Recent emphasis on producing energy from woody biomass has raised questions about the impact of a wood-energy market on the U.S. South's wood supply chain. We surveyed wood-energy facilities, fibermills, sawmills, private landowners, and government landholders to investigate the expected impact of a vibrant wood-energy market on the southern wood supply chain. Specifically, our study was designed to document potential competition for resources, wood supply chain profitability, and landowner willingness to sell timber to energy facilities. Results indicate that wood-energy facilities and traditional mills were not competing for raw material on a large scale at the time of the study, but competition is expected over the next decade. Almost 90% of fibermills reported that traditional forest industry mills should enter the wood-energy market, but most were skeptical that the new market would improve profitability. Ninety percent of responding landowners reported a willingness to sell to energy facilities if the right price is offered and all of those who had already sold timber to an energy facility were satisfied with the experience. Only 3.5% of respondents were unwilling to sell timber to an energy company, and only one of these respondents listed timber production as a primary objective, which indicates those who would not harvest timber for energy, may be unlikely to harvest timber for other purposes also. This study suggests that the southern wood supply chain is in position to profit from a wood-energy market; however, concerns remain about the coexistence of the forest products and wood-energy industries. (author)

Wood fuel supply as a function of forest owner preferences and management styles

International Nuclear Information System (INIS)

Bohlin, F.; Roos, A.

2002-01-01

The commercial demand for wood fuel is rapidly increasing in Sweden, and the domestic supply comes primarily from private non-industrial forest owners. A model was developed to analyse decision-making among these private forest owners. The model covers five factors: economics, transaction costs, concerns about soil fertility, forestry, and previous experience. It was applied in a survey among forest owners in four communities in central Sweden in 1999. Wood fuels had been sold from 60% of the estates. Analysis suggests that the price paid had little influence on the decision to sell. Transaction costs had been alleviated by the traditional timber buyer organizing the fuel trade, and by minimizing measurement in the forest. The primary reason for selling wood fuel was that the harvesting operation cleared the ground of debris. There is a general concern for loss in soil fertility due to wood fuel harvesting which is why some owners do not sell forest fuels. Two types of fuel-selling forest owners were identified: (1) an active manager seeking different gains from wood fuel harvest, and (2) an owner who primarily relies on the advice of the timber buyer. The findings indicate that large-scale traders of wood fuels have to be active in increasing supply, making direct contact with forest owners, and connecting trade with information on ecological and silvicultural effects. Offering ash recycling may enhance supply more than marginal price increases. (author)

Wood products trade and foreign markets. Annual production, consumption, and trade issue. Principal countries impacting US trade in wood products. Foreign agriculture circular

International Nuclear Information System (INIS)

1993-05-01

The Forest Products Division has compiled production, consumption, and trade data on selected wood products for twenty eight significant countries. The data, collected from various sources, is not necessarily compatible with US export and import data normally published in this circular, which comes from the US Census Bureau. To supplement this data, the following perspectives offer a comparative snapshot of conditions in these countries, both in the general economy and the wood products sector. Economic information was extracted from the 1992 World Factbook; Central Intelligence Agency

Gasification of Wood and Non-wood Waste of Timber Production as Perspectives for Development of Bioenergy

Science.gov (United States)

Kislukhina, Irina A.; Rybakova, Olga G.

2018-03-01

The article deals with biomass gasification technology using the gasification plant running on wood chips and pellets, produced from essential oils waste (waste of coniferous boughs). During the study, the authors solved the process task of improving the quality of the product gas derived from non-wood waste of timber production (coniferous boughs) due to the extraction of essential oils and the subsequent thermal processing of spent coniferous boughs at a temperature of 250-300°C degrees without oxygen immediately before pelleting. The paper provides the improved biomass gasification process scheme including the grinding of coniferous boughs, essential oil distillation and thermal treatment of coniferous boughs waste and pelletizing.

Alaska's timber harvest and forest products industry, 2005

Science.gov (United States)

Jeff M. Halbrook; Todd A. Morgan; Jason P. Brandt; Charles E. Keegan; Thale Dillon; Tara M. Barrett

2009-01-01

This report traces the flow of timber harvested in Alaska during calendar year 2005, describes the composition and operations of the state's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as trends in timber harvest, production, and sales of primary wood products....

Montana's forest products industry and timber harvest, 2004

Science.gov (United States)

Timothy P. Spoelma; Todd A. Morgan; Thale Dillon; Alfred L. Chase; Charles E. Keegan; Larry T. DeBlander

2008-01-01

This report traces the flow of Montana's 2004 timber harvest through the primary wood-using industries; provides a description of the structure, capacity, and condition of Montana's primary forest products industry; and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as changes in harvest, production...

From failure to value: economic valuation for a selected set of products and services from Mediterranean forests

Directory of Open Access Journals (Sweden)

Davide Pettenella

2016-04-01

Full Text Available Aim of study: the paper estimates the economic value of a selected range of forest products and services, i.e. roundwood, non-wood forest products (NWFPs, and carbon-related services.Area of study: the research covers 21 Mediterranean countries, distinguished into four sub-regions.Material and methods: data have been gathered from official statistical sources (e.g. FAOSTAT, scientific literature and technical reports. Different estimation approaches based on market-price have been used for different products/services.Main results: the estimated value ranges between €10,512 and €11,158 million (M. Wood products represent more than 85% of the total value. Within them, industrial timber is the most relevant component (65%. Figures for NWFPs are likely to be underestimated because data are available only for some products and countries. When using alternative estimates for pine nuts, pine resin and cork, figures show a €36.8-572 M increase. In geographical terms, the economic value of Mediterranean forests is highly concentrated: North-West Mediterranean countries account for 70%, and nearly 90% is in just four countries (France, Spain, Turkey and Italy.Research highlights: enhancing the offer of Mediterranean forest products and increasing their role in the rural economy could help to reduce the costs of forest protection: a well-structured forest economy ensuring stable flows of incomes can provide a fundamental set of public non-market services and social values to both local people and the whole community. Understanding the true value of natural resources, then, is an essential step for promoting their protection and sustainable use.Abbreviations: Bln: billion; CUM: cubic meter; EM: East Mediterranean; FAO: Food and Agriculture Organisation of the United Nations; FRA: Forest Resource Assessment; ha: hectare; M: million; NEM: North-East Mediterranean; NWFP: non-wood forest product; NWM: North-West Mediterranean; SM: South Mediterranean. 

Simulated long-term effects of varying tree retention on wood production, dead wood and carbon stock changes.

Science.gov (United States)

Santaniello, Francesca; Djupström, Line B; Ranius, Thomas; Weslien, Jan; Rudolphi, Jörgen; Sonesson, Johan

2017-10-01

Boreal forests are an important source of timber and pulp wood, but provide also other products and services. Utilizing a simulation program and field data from a tree retention experiment in a Scots pine forest in central Sweden, we simulated the consequences during the following 100 years of various levels of retention on production of merchantable wood, dead wood input (as a proxy for biodiversity), and carbon stock changes. At the stand level, wood production decreased with increased retention levels, while dead wood input and carbon stock increased. We also compared 12 scenarios representing a land sharing/land sparing gradient. In each scenario, a constant volume of wood was harvested with a specific level of retention in a 100-ha landscape. The area not needed to reach the defined volume was set-aside during a 100-year rotation period, leading to decreasing area of set-asides with increasing level of retention across the 12 scenarios. Dead wood input was positively affected by the level of tree retention whereas the average carbon stock decreased slightly with increasing level of tree retention. The scenarios will probably vary in how they favor species preferring different substrates. Therefore, we conclude that a larger variation of landscape-level conservation strategies, also including active creation of dead wood, may be an attractive complement to the existing management. Copyright © 2017 Elsevier Ltd. All rights reserved.

Plant diversity and energy potency of community forest in East Kalimantan, Indonesia: Searching for fast growing wood species for energy production

Directory of Open Access Journals (Sweden)

RUDIANTO AMIRTA

2016-05-01

Full Text Available Abstract. Amirta R, Yuliansyah, Angi EM, Ananto BR, Setiyono B, Haqiqi MT, Septiana HA, Lodong M, Oktavianto RN. 2016. Plant diversity and energy potency of community forest in East Kalimantan, Indonesia: Searching for fast growing wood species for energy production. Nusantara Bioscience 8: 22-30. Nowadays, there is an increasing interest in intensifying the production and use of biomass to replace fossil fuels for the production of heat and electricity, especially for a remote area that generally abundance with the wood biomass resources including in East Kalimantan, Indonesia. In this work, diversity of plant species that commonly growth in community forest area of East Kutai District, East Kalimantan, Indonesia had been studied to point out their energy potency to be used as biomass feedstock for the electricity generated. Diversity of plant species in the community forest was evaluated by making 13 sampling plots with 20mx20m size approximately. Concurently, the energy properties of plant biomass such as proximate and ultimate compositions were also analyzed using ASTM methods. Results showed that more than 30 species of tropical trees and wood shrubs were grown in the community forest. The presence of them was classified into two different growth of origins: natural and artificial plantation, and also three different categories of plant resources: tree species from logged over forest, commercial fast growing plant tree species for the fiber production and woody shrubs. The highest dominancy and productivity was found in Paraserianthes falcataria (L. Nielsen since the wood biomass was artificially planted for the commercial purposes. Among the 31 plant species analyzed we found the highest energy potency was obtained from Cratoxylum cochinchinense (Lour. Blume that produced 3.17 MWh/ton, and the lowest was from Trema orientalis (L. Blume 0.97 MWh/ton. The woody shrubs species such as Vernonia amigdalina Delile., Piper aduncum L., Gliricidia

Technical change in forest sector models: the global forest products model approach

Science.gov (United States)

Joseph Buongiorno; Sushuai Zhu

2015-01-01

Technical change is developing rapidly in some parts of the forest sector, especially in the pulp and paper industry where wood fiber is being substituted by waste paper. In forest sector models, the processing of wood and other input into products is frequently represented by activity analysis (input–output). In this context, technical change translates in changes...

Modeling the influence of alternative forest management scenarios on wood production and carbon storage: A case study in the Mediterranean region.

Science.gov (United States)

Bottalico, Francesca; Pesola, Lucia; Vizzarri, Matteo; Antonello, Leonardo; Barbati, Anna; Chirici, Gherardo; Corona, Piermaria; Cullotta, Sebastiano; Garfì, Vittorio; Giannico, Vincenzo; Lafortezza, Raffaele; Lombardi, Fabio; Marchetti, Marco; Nocentini, Susanna; Riccioli, Francesco; Travaglini, Davide; Sallustio, Lorenzo

2016-01-01

Forest ecosystems are fundamental for the terrestrial biosphere as they deliver multiple essential ecosystem services (ES). In environmental management, understanding ES distribution and interactions and assessing the economic value of forest ES represent future challenges. In this study, we developed a spatially explicit method based on a multi-scale approach (MiMoSe-Multiscale Mapping of ecoSystem services) to assess the current and future potential of a given forest area to provide ES. To do this we modified and improved the InVEST model in order to adapt input data and simulations to the context of Mediterranean forest ecosystems. Specifically, we integrated a GIS-based model, scenario model, and economic valuation to investigate two ES (wood production and carbon sequestration) and their trade-offs in a test area located in Molise region (Central Italy). Spatial information and trade-off analyses were used to assess the influence of alternative forest management scenarios on investigated services. Scenario A was designed to describe the current Business as Usual approach. Two alternative scenarios were designed to describe management approaches oriented towards nature protection (scenario B) or wood production (scenario C) and compared to scenario A. Management scenarios were simulated at the scale of forest management units over a 20-year time period. Our results show that forest management influenced ES provision and associated benefits at the regional scale. In the test area, the Total Ecosystem Services Value of the investigated ES increases 85% in scenario B and decreases 82% in scenario C, when compared to scenario A. Our study contributes to the ongoing debate about trade-offs and synergies between carbon sequestration and wood production benefits associated with socio-ecological systems. The MiMoSe approach can be replicated in other contexts with similar characteristics, thus providing a useful basis for the projection of benefits from forest

Non-Timber Forest Products Marketing Systems and Market Players in Southwest Virginia: A Case Study of Craft, Medicinal and Herbal, Specialty Wood, and Edible Forest Products

OpenAIRE

Greene, Sarah Marsden

1998-01-01

Non-timber forest products (NTFPs) are important in rural southwest Virginia as a source of household sustenance and supplemental income. The trade in NTFPs from this region is centuries old and now helps supply growing worldwide demands. Although marketing is a vital part of optimizing the value of these products, it has been ignored in rural natural resource development. This research analyzes marketing systems for selected NTFPs in southwest Virginia by describing marketing chains, inter...

Strategies for the promotion of the forest-wood chain in Calabria (southern Italy: the stakeholders’ point of view

Directory of Open Access Journals (Sweden)

Paletto A

2017-02-01

Full Text Available In Italy, the value of bioeconomy is 251 billion € and more than 1.7 million of workforce is employed in this sector. The forest-wood chain cover about 15% of total value of bioeconomy. The consultation draft of Italian Bioeconomy Strategy was presented on November 22, 2016. This document identifies three macro-sectors (agrifood, marine bioeconomy, forestry and biobased industry with the respective objectives and priorities. In addition, some Italian regions are organizing to devise a regional strategy detailing the key points of the EU Bioeconomy Strategy and Italian Bioeconomy Strategy in accordance with local peculiarities. In order to develop a regional strategy for the forest sector it is important to investigate the social demands and needs involving the local stakeholders. The aim of the study is to investigate the stakeholders’ opinions of Calabria Region (Italy about the priorities of forest-wood chain to include in the future regional bioeconomy strategy. The stakeholders’ opinions were collected through the face-to-face administration of a structured questionnaire to 99 local stakeholders. The respondents assessed the importance of a set of objectives aimed to enhance the forest-wood chain at local level (economic exploitation of wood products; diffusion of forest certification; orientation of production to market demand; coordination of forest-wood-energy chain’s actors; implementation of environmental and cultural forest values; improvement of the level of mechanization in wood processing; improvement of the efficiency of forestry workers. In addition, the respondents assessed the capacity of some specific activities to achieve the above mentioned objectives. The collected data were used to define two strategies aimed to enhance the forest-wood chain in Calabria Region. The results show that for the interviewed stakeholders the main three objectives are: the implementation of environmental and cultural forest values, the

Wood products utilization : a call for reflection and innovation

Science.gov (United States)

John A. Youngquist; Thomas E. Hamilton

1999-01-01

It is hard to imagine a world without forests. Forests provide a wide range of benefits at the local, national, and global levels. Some of these benefits depend on leaving the forest alone or subjecting it to only minimal interference. Other benefits can only be realized by harvesting the forest for wood and other products. The shrinking land base and growing human...

World trade in forest products and wood fuel

International Nuclear Information System (INIS)

Hillring, Bengt

2006-01-01

Wood fuel is a strategic resource for future energy supply and is usually utilised locally. Traditional use of wood fuel and other bioenergy has a share of 10-15% energy supply, used mainly for the household sector. The utilisation for industrial purposes is much smaller but is a strategic resource in the effort to fulfil the Kyoto agreement to replace fossil fuels and to mitigate greenhouse gas emissions. Many industrialised countries already use a significant share of biofuels in their energy supply e.g. Nordic countries while others like some other European Union countries are planning to increase their use. Production and use of biofuels need to be carried out sustainable. Official statistics do not report trade in such detail that international trade in different biomass types can be fully identified. However, FAO and European Forestry Institute are important sources. In some countries, there is a growing interest in the international trade, because the trade can provide biofuels at lower prices, larger quantities and better quality than domestic alternatives. The first signs of an international market price for wood fuel are indicated in Europe. For the future both the use and the trade of wood fuel is expected to increase. Analyses for trade in charcoal, wood chips, fuel wood and wood residues made in this report identify 'hot' trade spots in Europe, in south East Asia and in North America

Energy and carbon balances of wood cascade chains

Energy Technology Data Exchange (ETDEWEB)

Sathre, Roger; Gustavsson, Leif [Ecotechnology, Mid Sweden University, SE-831 25 OEstersund (Sweden)

2006-07-15

In this study we analyze the energy and carbon balances of various cascade chains for recovered wood lumber. Post-recovery options include reuse as lumber, reprocessing as particleboard, pulping to form paper products, and burning for energy recovery. We compare energy and carbon balances of chains of cascaded products to the balances of products obtained from virgin wood fiber or from non-wood material. We describe and quantify several mechanisms through which cascading can affect the energy and carbon balances: direct cascade effects due to different properties and logistics of virgin and recovered materials, substitution effects due to the reduced demand for non-wood materials when wood is cascaded, and land use effects due to alternative possible land uses when less timber harvest is needed because of wood cascading. In some analyses we assume the forest is a limiting resource, and in others we include a fixed amount of forest land from which biomass can be harvested for use as material or biofuel. Energy and carbon balances take into account manufacturing processes, recovery and transportation energy, material recovery losses, and forest processes. We find that land use effects have the greatest impact on energy and carbon balances, followed by substitution effects, while direct cascade effects are relatively minor. (author)

Alaska’s timber harvest and forest products industry, 2011

Science.gov (United States)

Erik C. Berg; Charles B. Gale; Todd A. Morgan; Allen M. Brackley; Charles E. Keegan; Susan J. Alexander; Glenn A. Christensen; Chelsea P. McIver; Micah G. Scudder

2014-01-01

This report traces the flow of timber harvested in Alaska during calendar year 2011, describes the composition and operations of the state’s primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as trends in timber harvest, production, export, sales of primary wood products,...

Dead wood for biodiversity - foresters torn between mistrust and commitment

International Nuclear Information System (INIS)

Deuffic, Philippe

2010-01-01

Dead wood is a key element in forest biodiversity, which is used as one of the indicators for sustainable development of forests. A survey was conducted among foresters and users in the Landes de Gascogne and ile-de-France areas so as to assess practises and social representations associated with dead wood. From the results of the survey, it appears that there is a diversity of practices and divergences about the implications connected with dead wood. The 64 respondents can be divided into roughly six groups (G1: 'industrial foresters', G2: the 'silvicultural foresters', G3: the 'remote foresters', G4: the 'environmentalist foresters', G5: the 'naturalists' and G6: the 'users'). Among other things, they can be differentiated by their management practises, their degree of knowledge about and concern with ecology, their social networks, their aesthetic judgment, their perception of risks and their economic requirements. While underscoring the scarce popularity on average of the biodiversity-related issues, this sociological survey also highlights: the need for a minimal regulatory framework to achieve integrated retention of dead wood, the serious concern of forest managers in the Landes with plant health risks associated with dead wood, and the need for a functional justification for keeping dead wood in the ecosystem. (authors)

Solid-wood production from temperate eucalypt plantations: a ...

African Journals Online (AJOL)

Since 1988, there has been a major focus in Tasmania on research for the management of temperate eucalypt plantations for solid wood. This coincided with the formal transfer of large areas of native forest that had previously been part of the production forest estate into reserves, a decision that triggered the establishment ...

Residential wood heating: The forest, the atmosphere and the public consciousness

International Nuclear Information System (INIS)

Gulland, J.F.; Hendrickson, O.Q.

1993-01-01

It is generally agreed by both energy and forestry scientists that, provided harvesting is conducted in a sustainable manner, the combustion of wood for energy production is essentially carbon dioxide neutral when the normal forest regeneration period is considered. When wood combustion replaces the consumption of fossil fuels, however, the net reduction in carbon dioxide release is almost immediate. In addition to the requirement of sustainable forestry practices, the maintenance of site biodiversity must also be considered. A preliminary review of the literature reveals that periodic selective harvesting can actually have a positive impact on the biodiversity of the forest. Despite the fact that the harvesting, processing and transportation of wood fuel invariably consumes fossil fuels, it has been shown in case studies that the energy return on investment can easily exceed a ratio of 25:1. Approximately 20 percent of the single family dwellings in Canada are heated to some extent with wood and the potential exists for an increasing contribution of wood fuel to residential energy requirements. However, there is evidence of confusion among the public regarding the environmental impact of woodburning, particularly as it relates to CO 2 emissions and carbon storage in forests. The confusion could impede the increased use of wood for residential heating because it calls into question the appropriateness of using wood for energy purposes. The forms of residential wood energy use that have evolved in rural North America provide important but neglected models of sustainable development. This could serve as the central theme of public information program to clarify the role of wood energy in the reduction of greenhouse gas emissions

Carbon sequestration in wood products: a method for attribution to multiple parties

International Nuclear Information System (INIS)

Tonn, Bruce; Marland, Gregg

2007-01-01

When forest is harvested some of the forest carbon ends up in wood products. If the forest is managed so that the standing stock of the forest remains constant over time, and the stock of wood products is increasing, then carbon dioxide is being removed from the atmosphere in net and this should be reflected in accounting for greenhouse gas emissions. We suggest that carbon sequestration in wood products requires cooperation of multiple parties; from the forest owner to the product manufacturer to the product user, and perhaps others. Credit for sequestering carbon away from the atmosphere could acknowledge the contributions of these multiple parties. Accounting under a cap-and-trade or tax system is not necessarily an inventory system, it is a system designed to motivate and/or reward an environmental objective. We describe a system of attribution whereby credits for carbon sequestration would be shared among multiple, contributing parties. It is hoped that the methodology outlined herein proves attractive enough to parties concerned to spur them to address the details of such a system. The system of incentives one would choose for limiting or controlling greenhouse gas emissions could be quite different, depending on how the attribution for emissions and sequestration is chosen

Material use and production changes in the U.S. wood pallet and container industry: 1992 to 2006

Science.gov (United States)

R. J. Bush; P. A. Araman

2009-01-01

A series of five studies conducted by the Virginia Tech Department of Wood Science and Forest Products, in collaboration with the USDA - Forest Service (Blacksburg, Virginia), have tracked activity in the U.S. wood pallet and container industry between 1992 and 2006. The studies documented trends in wood use and pallet production with in the industry, both new...

Forest-food nexus: a topical opportunity for human well-being and silviculture

Directory of Open Access Journals (Sweden)

Piermaria Corona

2016-07-01

Full Text Available As population will reach over 9 billion by 2050, interest in the forest-food nexus is rising. Forests play an important role in food production and nutrition. Forests can provide nutritionally-balanced diets, woodfuel for cooking and a broad set of ecosystem services. A large body of evidence recommends multi-functional and integrated landscape approaches to reimagine forestry and agriculture systems. Here, after a commented discussion of the literature produced in the last decade about the role for forests with respect to the food security global emergency, we summarize the state of the art in Italy as a representative country-case-study. The aim is to increase awareness about the potential of silviculture in Italy for combining ecological resilience with economic resilience, and reducing the pressure over tropical and sub-tropical forests by means of a sustainable intensification of forest management at national level. Although a quantification of the Italian non-wood forest products is difficult, the potential of this sector for the Italian bioeconomy is relatively high. Italy is among the four top European exporters of cork stoppers, is one of the three top countries for chestnut seed processing, and is among the leading exporters of wild mushroom, while it is the only European country among the top five global importers of tannins. In order to develop this sector for the food industry, more research is needed on non-wood forest products, the scale of production, emerging markets, marketing and production innovation. On the other hand, chain-supply fragmentation, landowner inertia, and lack of governance and cooperation may hamper an effective exploitation of non-wood products. A renewed joint impulse for exploitation of wood and non-wood products may come from a sustainable intensification of forest management. The strategies to guarantee an effective supply of non-wood products require appropriate business skills and the presence of a

Does nitrogen and sulfur deposition affect forest productivity?

Science.gov (United States)

Brittany A. Johnson; Kathryn B. Piatek; Mary Beth Adams; John R. Brooks

2010-01-01

We studied the effects of atmospheric nitrogen and sulfur deposition on forest productivity in a 10-year-old, aggrading forest stand at the Fernow Experimental Forest in Tucker County, WV. Forest productivity was expressed as total aboveground wood biomass, which included stem and branch weight of standing live trees. Ten years after stand regeneration and treatment...

Willingness of nonindustrial private forest owners in Norway to supply logging residues for wood energy

Science.gov (United States)

Hanne K. Sjolie; Dennis Becker; Daniel Habesland; Birger Solberg; Berit Hauger Lindstad; Stephanie Snyder; Mike. Kilgore

2016-01-01

Norway has set ambitious targets for increasing bioenergy production. Forest residue extraction levels are currently very low, but residues have the potential to be an important component of the wood energy supply chain. A representative sample of Norwegian nonindustrial private forest owners having at least 8 ha (20 acres) of productive forest land was surveyed about...

Drivers of aboveground wood production in a lowland tropical forest of West Africa: teasing apart the roles of tree density, tree diversity, soil phosphorus, and historical logging.

Science.gov (United States)

Jucker, Tommaso; Sanchez, Aida Cuni; Lindsell, Jeremy A; Allen, Harriet D; Amable, Gabriel S; Coomes, David A

2016-06-01

Tropical forests currently play a key role in regulating the terrestrial carbon cycle and abating climate change by storing carbon in wood. However, there remains considerable uncertainty as to whether tropical forests will continue to act as carbon sinks in the face of increased pressure from expanding human activities. Consequently, understanding what drives productivity in tropical forests is critical. We used permanent forest plot data from the Gola Rainforest National Park (Sierra Leone) - one of the largest tracts of intact tropical moist forest in West Africa - to explore how (1) stand basal area and tree diversity, (2) past disturbance associated with past logging, and (3) underlying soil nutrient gradients interact to determine rates of aboveground wood production (AWP). We started by statistically modeling the diameter growth of individual trees and used these models to estimate AWP for 142 permanent forest plots. We then used structural equation modeling to explore the direct and indirect pathways which shape rates of AWP. Across the plot network, stand basal area emerged as the strongest determinant of AWP, with densely packed stands exhibiting the fastest rates of AWP. In addition to stand packing density, both tree diversity and soil phosphorus content were also positively related to productivity. By contrast, historical logging activities negatively impacted AWP through the removal of large trees, which contributed disproportionately to productivity. Understanding what determines variation in wood production across tropical forest landscapes requires accounting for multiple interacting drivers - with stand structure, tree diversity, and soil nutrients all playing a key role. Importantly, our results also indicate that logging activities can have a long-lasting impact on a forest's ability to sequester and store carbon, emphasizing the importance of safeguarding old-growth tropical forests.

Instream wood loads in montane forest streams of the Colorado Front Range, USA

Science.gov (United States)

Jackson, Karen J.; Wohl, Ellen

2015-04-01

Although several studies examine instream wood loads and associated geomorphic effects in streams of subalpine forests in the U.S. Southern Rocky Mountains, little is known of instream wood loads in lower elevation, montane forests of the region. We compare instream wood loads and geomorphic effects between streams draining montane forest stands of differing age (old growth versus younger) and disturbance history (healthy versus infested by mountain pine beetles). We examined forest stand characteristics, instream wood load, channel geometry, pool volume, and sediment storage in 33 pool-riffle or plane-bed stream reaches with objectives of determining whether (i) instream wood and geomorphic effects differed significantly among old-growth, younger, healthy, and beetle-infested forest stands and (ii) wood loads correlated with valley and channel characteristics. Wood loads were standardized to drainage area, stream gradient, reach length, bankfull width, and floodplain area. Streams flowing through old-growth forests had significantly larger wood loads and logjam volumes (pairwise t-tests), as well as logjam frequencies (Kruskal-Wallis test), residual pool volume, and fine sediment storage around wood than streams flowing through younger forests. Wood loads in streams draining beetle-infested forest did not differ significantly from those in healthy forest stands, but best subset regression models indicated that elevation, stand age, and beetle infestation were the best predictors of wood loads in channels and on floodplains, suggesting that beetle infestation is affecting instream wood characteristics. Wood loads are larger than values from subalpine streams in the same region and jams are larger and more closely spaced. We interpret these differences to reflect greater wood piece mobility in subalpine zone streams. Stand age appears to exert the dominant influence on instream wood characteristics within pool-riffle streams in the study area rather than beetle

Wood ant nests as hot spots of carbon dioxide production and cold spots of methane oxidation in temperate forests

Czech Academy of Sciences Publication Activity Database

Jílková, Veronika; Picek, T.; Cajthaml, Tomáš; Frouz, Jan

2016-01-01

Roč. 18, April (2016), EGU2016-4634 ISSN 1607-7962. [European Geosciences Union General Assembly 2016. 17.04.2016-22.04.2016, Vienna] Institutional support: RVO:60077344 ; RVO:61388971 Keywords : wood ant nests * hot spots of carbon dioxide production * cold spots of methane oxidation * temperate forests Subject RIV: DF - Soil Science

Wood fuels sources and markets

International Nuclear Information System (INIS)

Koopmans, Auke

2003-01-01

Biomass energy is an important source of energy in most Asian countries. Households and industries use substantial amounts of fuel wood, charcoal and other biomass energy, such as agricultural residues, dung, leaves and sawmill residues. The main household applications are cooking and heating whereas industrial applications range widely. This paper provides an overview of estimates on the production and trade of biomass fuels in the South-east Asia region. The flows and channels used in the supply of wood fuels in different countries were analysed. This paper may help in identifying policy gaps with regards to the supply and consumption of wood fuels from both forest and non-forest sources. (Author)

Potential availability of urban wood biomass in Michigan: Implications for energy production, carbon sequestration and sustainable forest management in the U.S.A

International Nuclear Information System (INIS)

MacFarlane, David W.

2009-01-01

Tree and wood biomass from urban areas is a potentially large, underutilized resource viewed in the broader social context of biomass production and utilization. Here, data and analysis from a regional study in a 13-county area of Michigan, U.S.A. are combined with data and analysis from several other studies to examine this potential. The results suggest that urban trees and wood waste offer a modest amount of biomass that could contribute significantly more to regional and national bio-economies than it does at present. Better utilization of biomass from urban trees and wood waste could offer new sources of locally generated wood products and bio-based fuels for power and heat generation, reduce fossil fuel consumption, reduce waste disposal costs and reduce pressure on forests. Although wood biomass generally constitutes a 'carbon-neutral' fuel, burning rather than burying urban wood waste may not have a net positive effect on reducing atmospheric CO 2 levels, because it may reduce a significant long term carbon storage pool. Using urban wood residues for wood products may provide the best balance of economic and environmental values for utilization

Non-timber forest products enterprises in the south: perceived distribution and implications for sustainable forest management

Science.gov (United States)

J.L. Chamberlain; M. Predny

2003-01-01

Forests of the southern United States are the source of a great diversity of flora, much of which is gathered to produce non-timber forest products (NTFPs). These products are made from resources that grow under the forest canopy as trees, herbs, shrubs, vines, moss and even lichen. They occur naturally in forests or may be cultivated under the forest canopy or in...

Dead-wood addition promotes non-saproxylic epigeal arthropods but effects are mediated by canopy openness

Science.gov (United States)

Sebastian Seibold; Claus Bässler; Petr Baldrian; Lena Reinhard; Simon Thorn; Michael D. Ulyshen; Ingmar Weiß; Jörg Müller

2016-01-01

Restoring dead-wood amounts in forests is an increasingly and successfully applied conservation measure to counteract negative effects of intensive logging on biodiversity of saproxylic taxa. By contrast, if and how dead-wood addition benefits the vast number of non-saproxylic forest taxa, and how this varies with contextual factors like canopy openness, remains poorly...

The Role of Eucalyptus Globulus Forest and Products in Carbon Sequestration

International Nuclear Information System (INIS)

Arroja, L.; Dias, A.C.; Capela, I.

2006-01-01

This study is a contribution to the ongoing debate about the selection of the approach for carbon accounting in wood products to be used, in the future, in the national greenhouse gas inventories under the UNFCCC (United Nations Framework Convention on Climate Change). Two accounting approaches are used in this analysis: the stock-change approach and the atmospheric-flow approach. They are applied to the Portuguese Eucalyptus globulus forest sector. To achieve this objective, the fluxes of wood removed from the forest are tracked through its life cycle, which includes products manufacture (mainly pulp and paper), use and final disposal (landfilling, incineration and composting). This study develops a framework to the estimation of carbon sequestration in the forest of E. globulus, a fast growing species, more specifically, in the calculation of the conversion factors such as bark and foliage percentages and densities, used to convert wood volumes into total biomass. A mass balance approach based on real data from mills is also proposed, in order to assess carbon emissions from wood processing. The results show that E. globulus forest sector was a carbon sink, but the magnitude of the carbon sequestration differs substantially depending on the accounting approach used. The contribution of the forest ecosystem was smaller than the aggregated contribution of wood products in use and in landfills (including industrial waste), which reinforces the role that wood products play in national carbon budgets

Harvested wood products and carbon sink in a young beech high forest

Directory of Open Access Journals (Sweden)

Pilli R

2008-03-01

Full Text Available According to art. 3.4 of the Kyoto Protocol (KP, Italy has elected forest management as additional human-induced activity to attain the goal of reduction in greenhouse gas emissions. The whole forest area not subjected to afforestation, reforestation or deforestation processes since 1990 will be considered as managed forest. In order to analyse different management strategies, the Carbon-Pro Project, involving 9 partners of the European CADSES area, considered a young beech high forest (ex-coppice, defined as "transitory silvicultural system" as a common case study for the Pre-alps region. Using data collected with forest plans during the period 1983 - 2005, aboveground and belowground forest carbon stock and sink of a specific forest compartment were estimated by the Carbon Stock Method proposed by the IPCC Guidelines. In order to apply this approach 41 trees were cut and a species-specific allometric equation was developed. Considering the aboveground tree biomass, the carbon sink amounts to 1.99 and 1.84 Mg C ha-1 y-1 for the period 1983 - 1994 and 1994 - 2005 respectively. Adding the belowground tree biomass, the estimated sink amounts to 2.59 and 2.39 Mg C ha-1 y-1 for each period. Taking the harvested wood products (firewood, the total carbon sequestration during the second period is 0.16 Mg C ha-1 y-1. The case study highlights the possible rules for the different management strategies. In effect, the utilisation of the entire increase in aboveground biomass as firewood gives an energy substitution effect but, according to the Marrakesh Accords, it cannot be accounted for the KP. On the other hand, an accumulation strategy gives the maximum possible carbon absorption and retention.

The South's outlook for sustainable forest bioenergy and biofuels production

Science.gov (United States)

David Wear; Robert Abt; Janaki Alavalapati; Greg Comatas; Mike Countess; Will McDow

2010-01-01

The future of a wood-based biofuel/bioenergy sector could hold important implications for the use, structure and function of forested landscapes in the South. This paper examines a set of questions regarding the potential effects of biofuel developments both on markets for traditional timber products and on the provision of various non-timber ecosystem services. In...

Developing and commercializing sustainable new wood products : a process for identifying viable products.

Science.gov (United States)

Gordon A. Enk; Stuart L. Hart

2003-01-01

A process was designed to evaluate the sustainability and potential marketability of USDA Forest Service patented technologies. The process was designed and tested jointly by the University of North Carolina, the University of Michigan, Partners for Strategic Change, and the USDA Forest Service. Two technologies were evaluated: a fiber-based product and a wood fiber/...

Xylaria at the Forest Products Laboratory : past, present, and future

Science.gov (United States)

Regis B. Miller

1999-01-01

This report describes the history and current status of wood collections housed in the Center for Wood Anatomy Research at the Forest Products Laboratory, USDA Forest Service. The collections include the original Madison collection (MADw.) and the collection formerly housed at the Yale School of Forestry, Yale University (...

The effects of habitat degradation on metacommunity structure of wood-inhabiting fungi in European beech forests

DEFF Research Database (Denmark)

Halme, Panu; Ódor, Péter; Christensen, Morten

2013-01-01

Intensive forest management creates habitat degradation by reducing the variation of forest stands in general, and by removing old trees and dead wood in particular. Non-intervention forest reserves are commonly believed to be the most efficient tool to counteract the negative effects...... with different management histories. For this purpose, we used a large data set of wood-inhabiting fungi collected from dead beech trees in European beech-dominated forest reserves. The structure of fungal assemblages showed high beta diversity, while nestedness and similarity was low. During the decomposition...... extirpated specialized species from the local species pools in managed sites, and resulted in more homogeneous communities in managed sites. It is alarming that community structure is affected the most in the latest decay stages where the decay process turns the dead wood into litter, and which is thus...

EU mitigation potential of harvested wood products.

Science.gov (United States)

Pilli, Roberto; Fiorese, Giulia; Grassi, Giacomo

2015-12-01

The new rules for the Land Use, Land Use Change and Forestry sector under the Kyoto Protocol recognized the importance of Harvested Wood Products (HWP) in climate change mitigation. We used the Tier 2 method proposed in the 2013 IPCC KP Supplement to estimate emissions and removals from HWP from 1990 to 2030 in EU-28 countries with three future harvest scenarios (constant historical average, and +/-20% in 2030). For the historical period (2000-2012) our results are consistent with other studies, indicating a HWP sink equal on average to -44.0 Mt CO 2 yr -1 (about 10% of the sink by forest pools). Assuming a constant historical harvest scenario and future distribution of the total harvest among each commodity, the HWP sink decreases to -22.9 Mt CO 2 yr -1 in 2030. The increasing and decreasing harvest scenarios produced a HWP sink of -43.2 and -9.0 Mt CO 2 yr -1 in 2030, respectively. Other factors may play an important role on HWP sink, including: (i) the relative share of different wood products, and (ii) the combined effect of production, import and export on the domestic production of each commodity. Maintaining a constant historical harvest, the HWP sink will slowly tend to saturate, i.e. to approach zero in the long term. The current HWP sink will be maintained only by further increasing the current harvest; however, this will tend to reduce the current sink in forest biomass, at least in the short term. Overall, our results suggest that: (i) there is limited potential for additional HWP sink in the EU; (ii) the HWP mitigation potential should be analyzed in conjunction with other mitigation components (e.g. sink in forest biomass, energy and material substitution by wood).

Potential of forest management to reduce French carbon emissions - regional modelling of the French forest carbon balance from the forest to the wood.

Science.gov (United States)

Valade, A.; Luyssaert, S.; Bellassen, V.; Vallet, P.

2015-12-01

In France the low levels of forest harvest (40 Mm3 per year over a volume increment of 89Mm3) is frequently cited to push for a more intensive management of the forest that would help reducing CO2 emissions. This reasoning overlooks the medium-to-long-term effects on the carbon uptake at the national scale that result from changes in the forest's structure and delayed emissions from products decay and bioenergy burning, both determinant for the overall C fluxes between the biosphere and the atmosphere. To address the impacts of an increase in harvest removal on biosphere-atmosphere carbon fluxes at national scale, we build a consistent regional modeling framework to integrate the forest-carbon system from photosynthesis to wood uses. We aim at bridging the gap between regional ecosystem modeling and land managers' considerations, to assess the synergistic and antagonistic effects of management strategies over C-based forest services: C-sequestration, energy and material provision, fossil fuel substitution. For this, we built on inventory data to develop a spatial forest growth simulator and design a novel method for diagnosing the current level of management based on stand characteristics (density, quadratic mean diameter or exploitability). The growth and harvest simulated are then processed with a life cycle analysis to account for wood transformation and uses. Three scenarii describe increases in biomass removals either driven by energy production target (set based on national prospective with a lock on minimum harvest diameters) or by changes in management practices (shorter or longer rotations, management of currently unmanaged forests) to be compared with business as usual simulations. Our management levels' diagnostics quantifies undermanagement at national scale and evidences the large weight of ownership-based undermanagement with an average of 26% of the national forest (between 10% and 40% per species) and thus represents a huge potential wood resource

Harvesting of Non-timber Forest Products by the Local Communities in Mount Halimun-Salak National Park, West Java, Indonesia

Directory of Open Access Journals (Sweden)

Yelin Adalina

2014-09-01

Full Text Available Local communities around the forest need to be involved in securing the sustainability of Mount Halimun Salak National Park (MHSNP, for example through the utilization of non-timber forest products (NTFPs such as flora in the utilization zone. This research was aimed to provide data and information about 3 kinds of vegetation producing resin (Pinus merkusii, Agathis dammara, and Hevea brasiliensis and the harvesting NTFPs by the community in the forest vicinity. The research was conducted in MHSNP, and data were analyzed through quantitative-descriptive. The survey method was employed in the study through interviews of respondents using structured questionnaires.   This study revealed that the vegetations at the stage of tree comprised of the following: (1 Agathis dammara (damar with Importance Value Index (IVI of 276.15% and density of 452 trees ha-1, (2 Pinus merkusii (pine trees with IVI of 300.0% and density of 552 trees ha-1, and (3 Hevea brasiliensis (rubber trees with IVI of 217.42%  and density of 85 trees ha-1. Pine, damar, and rubber sap tapping afforded contribution in 59.18, 4.41, and 60.71%, respectively of the total household incomes. Community involvement in the collection of NTFPs in national parks implicated to the increasing of the forest communities revenue and the forests will be maintained since public can get benefits from forest resources. Forest management should be directed as a producer of NTFPs that can increase the economic income of forest communities with attention to ecological factors. Keywords: Harvesting, non-wood forest products, Mount Halimun-Salak National Park, community around the  forests

Forest bioenergy or forest carbon? Assessing trade-offs in greenhouse gas mitigation with wood-based fuels.

Science.gov (United States)

McKechnie, Jon; Colombo, Steve; Chen, Jiaxin; Mabee, Warren; MacLean, Heather L

2011-01-15

The potential of forest-based bioenergy to reduce greenhouse gas (GHG) emissions when displacing fossil-based energy must be balanced with forest carbon implications related to biomass harvest. We integrate life cycle assessment (LCA) and forest carbon analysis to assess total GHG emissions of forest bioenergy over time. Application of the method to case studies of wood pellet and ethanol production from forest biomass reveals a substantial reduction in forest carbon due to bioenergy production. For all cases, harvest-related forest carbon reductions and associated GHG emissions initially exceed avoided fossil fuel-related emissions, temporarily increasing overall emissions. In the long term, electricity generation from pellets reduces overall emissions relative to coal, although forest carbon losses delay net GHG mitigation by 16-38 years, depending on biomass source (harvest residues/standing trees). Ethanol produced from standing trees increases overall emissions throughout 100 years of continuous production: ethanol from residues achieves reductions after a 74 year delay. Forest carbon more significantly affects bioenergy emissions when biomass is sourced from standing trees compared to residues and when less GHG-intensive fuels are displaced. In all cases, forest carbon dynamics are significant. Although study results are not generalizable to all forests, we suggest the integrated LCA/forest carbon approach be undertaken for bioenergy studies.

Some Drivers of Change in Forest Conditions in Africa | Kowero ...

African Journals Online (AJOL)

Discovery and Innovation ... Open Access DOWNLOAD FULL TEXT ... important to livelihoods of rural communities, as habitats of wildlife, sources of genetic ... land, in addition to forests supplying wood and other non-wood forest products for

Using wood products to mitigate climate change: External costs and structural change

Energy Technology Data Exchange (ETDEWEB)

Sathre, Roger; Gustavsson, Leif [Ecotechnology, Mid Sweden University, 831 25 Oestersund (Sweden)

2009-02-15

In this study we examine the use of wood products as a means to mitigate climate change. We describe the life cycle of wood products including forest growth, wood harvest and processing, and product use and disposal, focusing on the multiple roles of wood as both material and fuel. We present a comparative case study of a building constructed with either a wood or a reinforced concrete frame. We find that the production of wood building material uses less energy and emits less carbon than the production of reinforced concrete material. We compare the relative cost of the two building methods without environmental taxation, under the current Swedish industrial energy taxation regime, and in scenarios that incorporate estimates of the full social cost of carbon emission. We find that the inclusion of climate-related external costs improves the economic standing of wood construction vis-a-vis concrete construction. We conclude that policy instruments that internalise the external costs of carbon emission should encourage a structural change toward the increased use of sustainably produced wood products. (author)

Slavic Forest, Norwegian Wood (models)

OpenAIRE

Rosa, Rudolf; Žabokrtský, Zdeněk; Zeman, Daniel; Mareček, David

2017-01-01

Trained models for UDPipe used to produce our final submission to VarDial 2017 shared task (https://bitbucket.org/hy-crossNLP/vardial2017) and described in a paper by the same authors titled Slavic Forest, Norwegian Wood.

Challenge and Response, Strategies for Survival in a Rapidly Changing Forest Products Industry

Science.gov (United States)

Al Schuler; Craig Adair; Paul Winistorfer

2005-01-01

The U.S. has long been the world's largest market for wood and wood products, fueled by its demand for wood-frame housing. But forest product markets are changing, both in terns of where the products originate (domestically or abroad),and what products are being produced and consumed.

Increasing wood mobilization through Sustainable Forest Management in protected areas of Italy

Directory of Open Access Journals (Sweden)

Mauro Maesano

2014-06-01

Full Text Available Normal 0 14 false false false IT JA X-NONE The European Community has long recognized the need to further promote renewable energy. Under the overall objective to support and enhance sustainable management, the promotion of the use of forest biomass could help to mitigate climate change by substituting fossil fuel, increasing carbon stock in wood products and improve energy self-sufficiency enhancing security of supply and providing job opportunities in rural areas. To what extent Italian forests can satisfy an increased wood demand, without compromising the others Ecosystem Services (ESs remains an open question. Our aim was to assess the potential supply of woody biomass from the network of protected areas in Italy considering the felling constraints. We estimated the theoretical annual potential increment from forest inventory data performing a correlation with the Corine Land Cover 2006 at the IV level with a 1:100,000 resolution elaborated in a GIS (Geographic Information System environment. The average annual potential increment at national level available for felling was 4.4 m3ha-1. Within the network of protected areas (EUAP and Natura 2000, the average annual increment, available to felling, was 0.98 m3ha-1, respectively, 0.81 m3ha-1 from coppice and 1.14 m3ha-1 from non-coppice forests. Based on data obtained from this study, the availability of wood materials could be increased of almost 20 % at national level by pursuing an active management within the network of protected areas. In Italy, the actual level of resource utilization is rather low; increasing felling together with the implementation of an active management within protected areas could allow satisfying, theoretically, the Italian wood consumption. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabella normale"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0

Women's Involvement in Non Timber Forest Products Utilization in ...

African Journals Online (AJOL)

Vitellaria paradoxa, Parkia biglobosa and Prosopis africana were more important for food and income while Nauclea latifolia, Khaya senegalensis ranked highest for medicine. Woody plants preferred as fuel wood included; Parkia biglobosa, Brachystegia eurycoma and Bridelia feruginea. Community Forest Programmes ...

U.S. Forest Greenhouse Gas Impacts of a continued Expansion of E.U. Wood Pellet Demand

Science.gov (United States)

Latta, G.; Baker, J.; Ohrel, S. B.

2016-12-01

The United States has ambitious goals of greenhouse gas (GHG) reductions. A portion of these reductions are based on expected contributions from land use, land use change, and forestry (LULUCF). The European Union has similar goals which have resulted in a doubling of wood pellets exported from US ports destined for EU power plants over the last few years. There are potential conflicts between the GHG consequences of this pellet supply and the LULUCF contribution to US GHG goals. This study seeks to inform the discussion by modeling US forest GHG accounts using data measured on a grid of over 150,000 USDA Forest Service, Forest Inventory and Analysis (FIA) forestland plots across the conterminous United States. Empirical yield functions are estimate from plot log volume, biomass and carbon and provide the basis for changes in forest characteristics over time. Demand data based on a spatial database of over 2,000 forest product manufacturing facilities representing 11 intermediate and 13 final solid and pulpwood products. Manufacturing and logging costs are specific to slope, log size, and volume removed along with transportation costs based on fuel prices, FIA plot, and milling locations. The resulting partial spatial equilibrium model of the US forest sector is solved annually for the period 2010 - 2030 with demand shifted by energy prices and macroeconomic indicators from the US EIA's Annual Energy Outlook for a series of potential wood pellet export targets. For each wood pellet export level simulated, figures showing historic and scenario-specific forest products production are generated. Maps of the spatial allocation of both forest harvesting and carbon fluxes are presented at the National level and detail is given in both the US North and Southeast.

Gender analysis of non-timber forest products (NTFPs) collection ...

African Journals Online (AJOL)

Millions of people, especially those living in rural areas in developing countries collect Non-Timber Forest products (NTFPs) daily. Women are known to play a prominent role in forestry and agricultural production in Nigeria despite not been captured as economically productive. This work looked into gender dimension ...

The role of novel forest ecosystems in the conservation of wood-inhabiting fungi in boreal broadleaved forests.

Science.gov (United States)

Juutilainen, Katja; Mönkkönen, Mikko; Kotiranta, Heikki; Halme, Panu

2016-10-01

The increasing human impact on the earth's biosphere is inflicting changes at all spatial scales. As well as deterioration and fragmentation of natural biological systems, these changes also led to other, unprecedented effects and emergence of novel habitats. In boreal zone, intensive forest management has negatively impacted a multitude of deadwood-associated species. This is especially alarming given the important role wood-inhabiting fungi have in the natural decay processes. In the boreal zone, natural broad-leaved-dominated, herb-rich forests are threatened habitats which have high wood-inhabiting fungal species richness. Fungal diversity in other broadleaved forest habitat types is poorly known. Traditional wood pastures and man-made afforested fields are novel habitats that could potentially be important for wood-inhabiting fungi. This study compares species richness and fungal community composition across the aforementioned habitat types, based on data collected for wood-inhabiting fungi occupying all deadwood diameter fractions. Corticioid and polyporoid fungi were surveyed from 67 130 deadwood particles in four natural herb-rich forests, four birch-dominated wood pastures, and four birch-dominated afforested field sites in central Finland. As predicted, natural herb-rich forests were the most species-rich habitat. However, afforested fields also had considerably higher overall species richness than wood pastures. Many rare or rarely collected species were detected in each forest type. Finally, fungal community composition showed some divergence not only among the different habitat types, but also among deadwood diameter fractions. Synthesis and applications : In order to maintain biodiversity at both local and regional scales, conserving threatened natural habitat types and managing traditional landscapes is essential. Man-made secondary woody habitats could provide the necessary resources and serve as surrogate habitats for many broadleaved deadwood

Legal Harvesting, Sustainable Sourcing and Cascaded Use of Wood for Bioenergy: Their Coverage through Existing Certification Frameworks for Sustainable Forest Management

Directory of Open Access Journals (Sweden)

Richard Sikkema

2014-09-01

Full Text Available The first objective of this paper was to provide an inventory of developments of certification schemes for sustainable biomass production, following recent EU legislation (both formalized and under development. One main pillar is the EU Timber Regulation for legal harvesting; a second one is the EU’s 2010 recommendations for sustainable woody biomass sourcing for energy; the third one is the EU Waste Directive. The second objective was to benchmark the coverage of this (draft legislation, when wood product certificates for sustainable forest management (SFM are used as proof of the related legislative requirements. We studied North America, as it is a major biomass supplier to the EU-28. Together with existing forest legislation in the US and Canada, SFM certificates are actively used to cover the EU’s (draft legislation. However, North American forests are only partially certified with fibers coming from certified forests; these are referred to as forest management (FM fibers. Other certified fibers should come from complementary risk assessments downstream in the supply chain (risk based fibers. Our benchmark concludes that: (a FM fiber certification by the Forest Stewardship Council (FSC and the Program for the Endorsement of Forest Certification (PEFC international standards show the highest level of coverage with EU’s (draft legislation; (b There is insufficient coverage for risk based fibers by FSC Controlled Wood (FSC-CW, PEFC Due Diligence (PEFC-DD, or SFI-fiber sourcing (SFI-FS. Other weaknesses identified for elaboration are: (c Alignment in definitions are needed, such as for primary forest, high carbon stock, and wood waste (cascading; (d Imperfect mass balance (fiber check downstream needs to be solved, as non-certified fiber flows are inadequately monitored; (e Add-on of a GHG calculation tool is needed, as GHG life cycle reporting is not covered by any of the SFM frameworks.

State forests deal cards for future of wood-industry

International Nuclear Information System (INIS)

Beer, G.; Sobinkovic, B.

2004-01-01

A decision to be made by Director of state-owned company Lesy SR Banska Bystrica (Slovak Forests), Karol Vins and the company management will influence the development of Slovak wood-processing industry for many years to come. He has to decide who will belong to an elite group of Slovak wood-processing companies. Those will be given a strategic advantage compared to their competitors: middle-term contracts for deliveries of wood from state forests. Majority of local wood-processing companies do not have longer than quarterly contracts signed for deliveries of wood from state-owned forests. And so they would like to introduce new business rules for Lesy SR by the end of this year. But K. Vins claims that the decision about key customers has to be made by Ministries of Economy and Land Management. Lesy SR cut about 50 percent of all wood cut in Slovakia and are therefore the most important supplier of this material on the market. And so all the major companies on the market focusing on immediate processing of wood are interested in it. . In general their prices are a few percent below the level as the volumes they offer are also lower. And so consumers complain mainly about high prices and the fact that they are not allowed to sign long-term contracts for wood deliveries. They also complain that the management of Lesy SR is not able to set realistic wood prices as it does not know the actual costs of wood and cutting price per 1 cubic meter of wood. Lesy SR are facing a major transformation. The management asked for a change organisation of the company, concentration of sale of wood, decreasing the number of staff by 3 600 people. The sale of redundant property should earn the company 1,4 bn Sk (35.03 mn Eur). The final decision on how the organization and economy of the company will change has to be made by the cabinet

Bioenergy production and forest landscape change in the southeastern United States

Science.gov (United States)

Costanza, Jennifer K.; Abt, Robert C.; McKerrow, Alexa; Collazo, Jaime A.

2016-01-01

Production of woody biomass for bioenergy, whether wood pellets or liquid biofuels, has the potential to cause substantial landscape change and concomitant effects on forest ecosystems, but the landscape effects of alternative production scenarios have not been fully assessed. We simulated landscape change from 2010 to 2050 under five scenarios of woody biomass production for wood pellets and liquid biofuels in North Carolina, in the southeastern United States, a region that is a substantial producer of wood biomass for bioenergy and contains high biodiversity. Modeled scenarios varied biomass feedstocks, incorporating harvest of ‘conventional’ forests, which include naturally regenerating as well as planted forests that exist on the landscape even without bioenergy production, as well as purpose-grown woody crops grown on marginal lands. Results reveal trade-offs among scenarios in terms of overall forest area and the characteristics of the remaining forest in 2050. Meeting demand for biomass from conventional forests resulted in more total forest land compared with a baseline, business-as-usual scenario. However, the remaining forest was composed of more intensively managed forest and less of the bottomland hardwood and longleaf pine habitats that support biodiversity. Converting marginal forest to purpose-grown crops reduced forest area, but the remaining forest contained more of the critical habitats for biodiversity. Conversion of marginal agricultural lands to purpose-grown crops resulted in smaller differences from the baseline scenario in terms of forest area and the characteristics of remaining forest habitats. Each scenario affected the dominant type of land-use change in some regions, especially in the coastal plain that harbors high levels of biodiversity. Our results demonstrate the complex landscape effects of alternative bioenergy scenarios, highlight that the regions most likely to be affected by bioenergy production are also critical for

Wood power in North Carolina

Energy Technology Data Exchange (ETDEWEB)

Cleland, J.G.; Guessous, L. [Research Triangle Institute, Research Triangle Park, NC (United States)

1993-12-31

North Carolina (NC) is one of the most forested states, and supports a major wood products industry. The NC Department of Natural Resources sponsored a study by Research Triangle Institute to examine new, productive uses of the State`s wood resources, especially electric power generation by co-firing with coal. This paper summarizes our research of the main factors influencing wood power generation opportunities, i.e., (1) electricity demand; (2) initiative and experience of developers; (3) available fuel resources; (4) incentives for alternate fuels; and (5) power plant technology and economics. The results cover NC forests, short rotation woody crops, existing wood energy facilities, electrical power requirements, and environmental regulations/incentives. Quantitative assessments are based on the interests of government agencies, utilities, electric cooperatives, developers and independent power producers, forest products industries, and the general public. Several specific, new opportunities for wood-to-electricity in the State are identified and described. Comparisons are made with nationwide resources and wood energy operations. Preferred approaches in NC are co-generation in existing or modified boilers and in dedicated wood power plants in forest industry regions. Co-firing is mainly an option for supplementing unreliable primary fuel supplies to existing boilers.

From failure to value: economic valuation for a selected set of products and services from Mediterranean forests

Energy Technology Data Exchange (ETDEWEB)

Masiero, M.; Pettenella, D.; Secco, L.

2016-07-01

Aim of study: the paper estimates the economic value of a selected range of forest products and services, i.e. roundwood, non-wood forest products (NWFPs), and carbon-related services. Area of study: the research covers 21 Mediterranean countries, distinguished into four sub-regions. Material and methods: data have been gathered from official statistical sources (e.g. FAOSTAT), scientific literature and technical reports. Different estimation approaches based on market-price have been used for different products/services. Main results: the estimated value ranges between €10,512 and €11,158 million (M). Wood products represent more than 85% of the total value. Within them, industrial timber is the most relevant component (65%). Figures for NWFPs are likely to be underestimated because data are available only for some products and countries. When using alternative estimates for pine nuts, pine resin and cork, figures show a €36.8-572 M increase. In geographical terms, the economic value of Mediterranean forests is highly concentrated: North-West Mediterranean countries account for 70%, and nearly 90% is in just four countries (France, Spain, Turkey and Italy). Research highlights: enhancing the offer of Mediterranean forest products and increasing their role in the rural economy could help to reduce the costs of forest protection: a well-structured forest economy ensuring stable flows of incomes can provide a fundamental set of public non-market services and social values to both local people and the whole community. Understanding the true value of natural resources, then, is an essential step for promoting their protection and sustainable use. (Author)

ToSIA-A tool for sustainability impact assessment of forest-wood-chains

NARCIS (Netherlands)

Lindner, M.; Suominen, T.; Palosuo, T.; Garcia-Gonzalo, J.; Verweij, P.J.F.M.; Zudin, S.; Päivinen, R.

2010-01-01

Within the forest sector, the sustainability concept has evolved from a narrow focus on sustainable wood production to a much broader evaluation of environmental, social, and economic sustainability for whole value chains. A new software tool – ToSIA – has been developed for assessing sustainability

Impacts of Tariff and Non-tariff Trade Barriers on Global Forest Products Trade: An Application of the Global Forest Products Model

NARCIS (Netherlands)

Sun, L.; Bogdanski, B.; Stennes, B.; Kooten, van G.C.

2010-01-01

Although there has been considerable analysis on the effects of trade measures on forest product markets, these have tended to focus on tariffs. There is growing concern about the impact of non-tariff trade measures on the global forest product sector. The objective of this study is to fill a gap

The Four Corners timber harvest and forest products industry, 2007

Science.gov (United States)

Steven W. Hayes; Todd A. Morgan; Erik C. Berg; Jean M. Daniels; Mike Thompson

2012-01-01

This report traces the flow of timber harvested in the "Four Corners" States (Arizona, Colorado, New Mexico, and Utah) during calendar year 2007, describes the composition and operations of the region's primary forest products industry, and quantifies volumes and uses of wood fiber. Historical wood products industry changes are discussed, as well as...

Special forest products: biodiversity meets the marketplace.

Science.gov (United States)

Nan C. Vance; Jane Thomas

1997-01-01

Although North American forests traditionally have been viewed as a source of wood and paper,a variety of profitable products are being discovered that come not only from trees, but from nonwoody plants, lichens, fungi, algae, and microorganisms. The northern temperate forests’ abundant biotic resources are being transformed into medicinals, botanicals, decoratives,...

Supply chains of forest chip production in Finland

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, Kalle (Metsaeteho Oy, Helsinki (Finland)), e-mail: kalle.karha@metsateho.fi

2010-07-15

The Metsaeteho study investigated how logging residue chips, stump wood chips, and chips from small sized thinning wood and large-sized (rotten) roundwood used by heating and power plants were produced in Finland in 2008. Almost all the major forest chip suppliers in Finland were involved in the study. The total volume of forest chips supplied in 2008 by these suppliers was 6.5 TWh. The study was implemented by conducting an e-mail questionnaire survey and telephone interviews. Research data was collected in March-May 2009. The majority of the logging residue chips and chips from small-sized thinning wood were produced using the roadside chipping supply chain in Finland in 2008. The chipping at plant supply chain was also significant in the production of logging residue chips. 70% of all stump wood chips consumed were comminuted at the plant and 29% at terminals. The role of the terminal chipping supply chain was also significant in the production of chips from logging residues and small-sized wood chips. When producing chips from large-sized (rotten) roundwood, nearly a half of chips were comminuted at plants and more than 40% at terminals

Supply systems of forest chip production in Finland

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K. (Metsaeteho Oy, Helsinki (Finland)), e-mail: kalle.karha@metsateho.fi

2010-07-01

The Metsaeteho study investigated how logging residue chips, stump wood chips, and chips from small-diameter thinning wood and large-sized (rotten) roundwood used by heating and power plants were produced in Finland in 2009. Almost all the major forest chip suppliers in Finland were involved in the study. The total volume of forest chips supplied in 2009 by these suppliers was 8,4 TWh. The study was implemented by conducting an e-mail questionnaire survey and telephone interviews. Research data was collected from March-May, 2010. The majority of the logging residue chips and chips from small-diameter thinning wood were produced using the roadside chipping supply system in Finland in 2009. The chipping at plant supply system was also significant in the production of logging residue chips. Nearly 70 % of all stump wood chips consumed were comminuted at the plant and 28 % at terminals. The role of the terminal chipping supply system was also significant in the production of chips from logging residues and small-diameter wood chips. When producing chips from large-sized (rotten) roundwood, similarly roughly 70 % of chips were comminuted at plants and 23 % at terminals. (orig.)

Supply chains of forest chip production in Finland

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K. (Metsaeteho Oy, Helsinki (Finland)), Email: kalle.karha@metsateho.fi

2009-07-01

The Metsaeteho study investigated how logging residue chips. stump wood chips, and chips from small-sized thinning wood and large-sized (rotten) roundwood used by heating and power plants were produced in Finland in 2008. Almost all the major forest chip suppliers in Finland were involved in the study. The total volume of forest chips supplied in 2008 by these suppliers was 6,5 TWh. The study was implemented by conducting an e-mail questionnaire survey and telephone interviews. Research data was collected in March-May 2009. The majority of the logging residue chips and chips from small-sized thinning wood were produced using the roadside chipping supply chain in Finland in 2008. The chipping at plant supply chain was also significant in the production of logging residue chips. 70% of all stump wood chips consumed were comminuted at the plant and 29% at terminals. The role of the terminal chipping supply chain was also significant in the production of chips from logging residues and small-sized wood chips. When producing chips from large-sized (rotten) roundwood, nearly a half of chips were comminuted at plants and more than 40 % at terminals. (orig.)

Multi-dimensional sustainability framework to evaluate forest and wood energy production; Moniulotteinen kestaevyyden arviointikehikko puuenergian tuotannolle

Energy Technology Data Exchange (ETDEWEB)

Leskinen, P.; Kaehkoenen, T.; Laehtinen, K.; Pasanen, K.; Pitkaenen, S.; Sironen, S.; Myllyviita, T.; Sikanen, L.; Asikainen, A.

2012-02-15

The future economy will be more and more dependent on the sustainable use of natural resources, at least if the views on the importance and possibilities of the bioeconomy are realized in practice. The sustainability of the use of natural resources has previously been studied from the perspective of ecological sustainability in particular. Social sustainability has also been examined in several studies. On the other hand, economic sustainability is a prerequisite for developing business activities. As defining and framing of cultural sustainability is challenging, up to now it has only been discussed to some extent, although the importance of cultural sustainability has not been understated. When developing the sustainability of the use of natural resources, all the above-mentioned dimensions of sustainability are present in parallel and they need to be acknowledged in decision-making. The starting point of this study is that natural resources need to be used sustainably and that different options for utilizing natural resources need to be compared from the sustainability perspective, without giving higher priority to any sustainability dimension compared to others beforehand. In this study four production chains based on energy use of forest biomass were examined: (1) local district heating based on forest chips, (2) combined heat and power with wood and peat, (3) wood pellet production from by-products of the wood product industry, and (4) biodiesel production based on wood and peat. The indicators for different sustainability dimensions in the studied production chains were determined through expert interviews and the indicator values were determined through literature review and interviews. The mathematical examination of sustainability was based on multi-criteria decision analysis (MCDA) so that a computational tool suitable for the calculations was developed. In total, 20 - 40 indicators were defined for each sustainability dimension; out of these, five to

The role of natural wood constituents on the anaerobic treatability of forest industry wastewaters

NARCIS (Netherlands)

Sierra - Alvarez, R.

1990-01-01

Anaerobic treatment has been shown to be an efficient and energy conserving method for treating various types of readily biodegradable non-inhibitory forest industry wastewaters. However, the high toxicity of paper mill effluents derived from chemical wood processing operations has hampered

Effect of policies on pellet production and forests in the U.S. South: a technical document supporting the Forest Service update of the 2010 RPA Assessment

Science.gov (United States)

Karen L. Abt; Robert C. Abt; Christopher S. Galik; Kenneth E. Skog

2014-01-01

Current policies in the European Union (EU) requiring renewable and low greenhouse gas-emitting energy are affecting wood products manufacturing and forests in the United States. These policies have led to increased U.S. pellet production and export to the EU, which has in turn affected U.S. forests and other wood products manufacturing. At this time, the primary...

Unexpected Interactions between Agricultural and Forest Sectors through International Trade: Wood Pallets and Agricultural Exports in Costa Rica

Directory of Open Access Journals (Sweden)

Isaline Jadin

2016-12-01

Full Text Available International market forces have played an increasingly important role in shaping land use dynamics through complex supply chains. In Costa Rica, the shift from a net loss to a net gain in forest cover was facilitated by forest plantations and the replacement of extensive cropland and pastures by export-oriented, high-yielding crops. However, agricultural intensification generated several feedbacks affecting forests. We analyzed the interactions between Costa Rica’s agricultural and forestry sectors associated with the use of wood pallets for commodity exports over 1985–2013. Wood pallets for growing agricultural exports created a demand for domestic tree plantations. The annual land demand for tree plantations to produce these wood pallets increased by 669%, reaching 17,606 ha in 2013 and representing 28% of the increase in demand for cropland for agricultural exports over 1994–2013. Wood supplied from plantations failed to fully substitute for wood from natural forests, only allowing for a relative substitution and preventing a major sparing of these forests. The dominant use of wood from plantations for production of low-value pallets de-incentivized investments in sustainable plantations. We showed that, beyond the typical interactions between agriculture and forestry through direct competition for land, international trade generated unexpected feedback where agricultural activities and supply chains affected forestry by triggering new demand and profound changes in forestry management. Land systems behave as complex systems, calling for integrated approaches to study the outcomes of forest conservation, reforestation programs, and development of land-based businesses.

Decadal Variations in Eastern Canada's Taiga Wood Biomass Production Forced by Ocean-Atmosphere Interactions.

Science.gov (United States)

Boucher, Etienne; Nicault, Antoine; Arseneault, Dominique; Bégin, Yves; Karami, Mehdi Pasha

2017-05-26

Across Eastern Canada (EC), taiga forests represent an important carbon reservoir, but the extent to which climate variability affects this ecosystem over decades remains uncertain. Here, we analyze an extensive network of black spruce (Picea mariana Mill.) ring width and wood density measurements and provide new evidence that wood biomass production is influenced by large-scale, internal ocean-atmosphere processes. We show that while black spruce wood biomass production is primarily governed by growing season temperatures, the Atlantic ocean conveys heat from the subtropics and influences the decadal persistence in taiga forests productivity. Indeed, we argue that 20-30 years periodicities in Sea Surface Temperatures (SSTs) as part of the the Atlantic Multi-decadal Oscillation (AMO) directly influence heat transfers to adjacent lands. Winter atmospheric conditions associated with the North Atlantic Oscillation (NAO) might also impact EC's taiga forests, albeit indirectly, through its effect on SSTs and sea ice conditions in surrounding seas. Our work emphasizes that taiga forests would benefit from the combined effects of a warmer atmosphere and stronger ocean-to-land heat transfers, whereas a weakening of these transfers could cancel out, for decades or longer, the positive effects of climate change on Eastern Canada's largest ecosystem.

Bioenergy research programme. Yearbook 1996. Production of wood fuels; Bioenergian tutkimusohjelma. Vuosikirja 1996. Puupolttoaineiden tuotantotekniikka

Energy Technology Data Exchange (ETDEWEB)

Nikku, P [ed.

1997-12-01

The aim of the programme is to increase the use of economically profitable and environmentally sound bioenergy by improving the competitiveness of present peat and wood fuels. Research and development projects will also develop new economically competitive biofuels, new equipment and methods for production, handling and utilisation of biofuels. The total funding for 1996 was 27.3 million FIM and the number of projects 63. The number of projects concerning wood fuels production was 36. The main goals of the research are to develop new production methods for wood fuels in order to decrease the production costs to the level of imported fuels (100 km distance). The second goal is to decrease the small scale production costs by 20 % as compared with the 1992 technology level. Also, new harvesting technology and new work methods will be developed for forest owners and small-entrepreneurs in the course of the programme. Results of the projects carried out in 1996 in this programme are presented in this publication. The integrated harvesting methods, which supply both raw material to wood products industry and wood fuel for energy production, have been chosen the main research areas because they seem to be most promising. Most of the projects are focused in the wood fuel production from first thinnings and from final fellings. The projects broadly covered the research area focusing from material flows, productivity studies, basic wood properties to several case studies. The follow up project of Evaluation-drum chipper was completed with good fuel quality and productivity results. Also the large Forest Energy Project of Central Finland was completed. The project was a significant technology transfer and information dissemination project. (orig.)

Forest products cluster development in central Arizona—implications for landscape-scale forest restoration

Science.gov (United States)

David. Nicholls

2014-01-01

Since 2004, close to 50,000 ac of hazardous fuels have been mechanically treated in east-central Arizona as part of the USDA Forest Service's first 10-year stewardship project on national forest lands. The need for coordinated wood products and biomass utilization in Arizona is likely to increase as broad-scale restoration treatments across Arizona's national...

Harvesting techniques for energy wood of forest owners; Metsaenomistajien energiapuun korjuutekniikat

Energy Technology Data Exchange (ETDEWEB)

Ryynaenen, S. [Work Efficiency Inst., Rajamaeki (Finland)] Ihonen, M. [Work Efficiency Inst., Helsinki (Finland)

1997-12-01

The aim of the project is to develop harvesting techniques and methods for small-wood and logging residues, suitable for use by forest owners and small-scale entrepreneurs. Examples of such methods are piling of logging residues at site and forest transport with farm tractors. The project is carried out by field experiments with new machines and methods and by work-studies at sites in practice. A cost-accounting model for firewood production will also be revised. The work study of the harvesting method of first- thinning wood and energy wood based on the use of SykeNaarva logging equipment was carried out as part of chips supply to Perho Energy Co-operative. The productivity of logging was in practice significantly higher than in previous field tests with the prototype equipment. The costs were lower than in manual logging. Field experiments were also carried out with manual logging with a chain saw equipped with felling grips (Reo-Tuote Ky). Operation experiments with a chain-limbing device for farm tractors (Eskon Paja Oy), related to product development, were also carried out. A literature study, specialist interviews and field experiments were carried out on the transports of logging residues with farm factors. A four-drive tractor equipped with a timber loader and a trailer is suited technically for this work. Productivity is reduced by slow loading and in particular by a small load size when operating with the basic fleet. The costs are reduced by small capital costs and by rapid transports between the sites. To improve the economy of harvesting logging residues, inexpensive technical solutions were studied for farm tractors in co-operation with engineering works

Who, what, and why: the products, their use, and issues about management of non-timber forest products in the United States

Science.gov (United States)

Susan J. Alexander

2001-01-01

Non-timber forest products in the United States include floral greens, Christmas ornamentals, wild edibles, medicinals, crafts, and transplants. Non-timber forest products are important to many people for many reasons. People harvest products from forests for personal use, cultural practices, and sale. The tremendous variety of species harvested for the many markets...

The Four Corners timber harvest and forest products industry, 2012

Science.gov (United States)

Colin B. Sorenson; Steven W. Hayes; Todd A. Morgan; Eric A. Simmons; Micah G. Scudder; Chelsea P. McIver; Mike T. Thompson

2016-01-01

This report traces the flow of timber harvested in the "Four Corners" States (Arizona, Colorado, New Mexico, and Utah) during calendar year 2012, describes the composition and operations of the region’s primary forest products industry, and quantifies volumes and uses of wood fiber. Recent changes in the wood products industry are discussed, as well as trends...

Non-timber forest products of the North-West District of Guyana

OpenAIRE

Andel, T.R. van

2000-01-01

This thesis describes the use of non-timber forest products (NTFPs) by indigenous peoples of northwest Guyana. Part I contains a general analysis of NTFP harvesting in northwest Guyana Part II is an illustrated field guide of the useful plants encountered. Chapter 1: introduction Chapter 2: floristic composition and vegetation structure of well-drained mixed forest and 20- and 60-year old secondary forests. Previous forest inventories predicted a general low diversity for the North-West Distr...

Business Management Practices for Small to Medium Sized Forest Products Firms

OpenAIRE

Espinoza, Omar Alejandro; Smith, Robert L. (Robert Lee), 1955 August 21-

2015-01-01

Provides the information required to start a small forest products company by discussing the U.S. forest products industry, business management, strategic planning, business plans, and management of human resources, marketing, operations, and finances. This project was supported by the Wood Education and Resource Center, Northeastern Area State and Private Forestry, Forest Service, U.S. Department of Agriculture, award number: 2010-DG-148.

Assessing potential sustainable wood yield

Science.gov (United States)

Robert F. Powers

2001-01-01

Society is making unprecedented demands on world forests to produce and sustain many values. Chief among them is wood supply, and concerns are rising globally about the ability of forests to meet increasing needs. Assessing this is not easy. It requires a basic understanding of the principles governing forest productivity: how wood yield varies with tree and stand...

Dead wood in European beech (Fagus sylvatica) forest reserves

NARCIS (Netherlands)

Christensen, M.; Hahn, K.; Mountford, E.P.; Ódor, P.; Standovár, T.; Rozenbergar, D.; Diaci, J.; Wijdeven, S.M.J.; Meyer, P.; Winter, S.; Vrska, T.

2005-01-01

Data were analysed on the volume of dead wood in 86 beech forest reserves, covering most of the range of European beech forests. The mean volume was 130 m3/ha and the variation among reserves was high, ranging from almost nil to 550 m3/ha. The volume depended significantly on forest type, age since

Wood energy-commercial applications

Science.gov (United States)

Kennel, R. P.

1978-01-01

Wood energy is being widely investigated in many areas of the country because of the many obvious benefits of wood fuel such as the low price per million Btus relative to coal, oil, and gas; the wide availability of noncommercial wood and the proven ability to harvest it; established technology which is reliable and free of pollution; renewable resources; better conservation for harvested land; and the potential for jobs creation. The Southeastern United States has a specific leadership role in wood energy based on its established forest products industry experience and the potential application of wood energy to other industries and institutions. Significant questions about the widespread usage of wood energy are being answered in demonstrations around the country as well as the Southeast in areas of wood storage and bulk handling; high capitalization costs for harvesting and combustion equipment; long term supply and demand contracts; and the economic feasibility of wood energy outside the forest products industry.

Strategies for Sustainable Development of Non-Timber Forest Products in Senegal

OpenAIRE

Sene, Abdou

2001-01-01

In recent years, forests have been increasingly recognized as rich reservoirs for many valuable biological resources. As a result of the devastation caused by drought, clearing land for agriculture, and overexploitation of timber, there has been a growing interest in non-timber forest products (NTFPs). The Senegal Forestry Action Plan, designed to ensure sustainable forest management, stresses the importance of identifying the constraints to and opportunities for sustainable development of no...

An Analysis of the U.S. Wood Products Import Sector: Prospects for Tropical Wood Products Exporters

Directory of Open Access Journals (Sweden)

W.A.R.T.W. Bandara

2012-10-01

Full Text Available The U.S. has dramatically altered its wood product imports and exports during the past few years,and at present, it is the second largest wood product importer in the world. Hence, an understanding ofmarket structures, factors in selecting foreign suppliers, and the emphasis placed on environmentalissues/certification are critical to understand from the perspective of wood products importers in the U.S.This study provides an analysis of the U.S. wood products import sector with special emphasis on currentand future opportunities for tropical wood products exporters to the U.S. market.In this study, 158 wood products importers in the U.S. were surveyed using a mailingquestionnaire. The adjusted response rate was 40.6 percent. Results indicated that most of the respondentswere small to medium scale firms, but major importers of wood products. According to respondents,wood products to the U.S. mainly come from Brazil, Chile, and China. From the importers’ perspective,Brazilian wood products ranked first for its quality followed by wood products from Chile and Finland.Product quality, long term customer relationships, on-time delivery of orders, fair prices, and supplierreputation were the factors deemed important in selecting overseas suppliers. Majority of respondentswere importing certified wood products. FSC, SFI, and ISO 14000 were the mostly accepted certificationprograms. However, certification was not a major factor in foreign supplier selection criteria. Whenconsidered the U.S. wood products importers’ tendency to diversify their products and species imported,attractive opportunities exist for wood products suppliers from tropical countries.

Greek timber industries and wood product markets over the last century: development constraints and future directions

Directory of Open Access Journals (Sweden)

Panagiotis P. Koulelis

2011-01-01

Full Text Available This paper examines the Greek forestry sector after 1930. According to the past literature, the sector was entirely degraded and reliable data are not available. The study analyses critical historical data about timber sector and timber companies; the main objective is the specification of the factors that kept the Greek forest sector underdevelopment. The factors and the development constraints, including the indigenous characteristics of the Greek forests, the inhibitory policy for timber production investments, especially in the state industries, lack of market research, unorthodox procedures for sale of the wood, bad quality and high cost of production and periods of general economic recession are analyzed farther. Conclusively, the need for producing official forest maps, forest data recording, rapid adaptation to EU specifications, investments, deep changes in to the managership of the state industries, permanent and specialized personnel and promotion of national programs for the development of the small-scale wood elaboration and wood selling industrial units are some of the solutions for the above problems that could be suggested.

Greek timber industries and wood product markets over the last century: development constraints and future directions

Directory of Open Access Journals (Sweden)

Panagiotis P. Koulelis

2013-12-01

Full Text Available This paper examines the Greek forestry sector after 1930. According to the past literature, the sector was entirely degraded and reliable data are not available. The study analyses critical historical data about timber sector and timber companies; the main objective is the specification of the factors that kept the Greek forest sector underdevelopment. The factors and the development constraints, including the indigenous characteristics of the Greek forests, the inhibitory policy for timber production investments, especially in the state industries, lack of market research, unorthodox procedures for sale of the wood, bad quality and high cost of production and periods of general economic recession are analyzed farther. Conclusively, the need for producing official forest maps, forest data recording, rapid adaptation to EU specifications, investments, deep changes in to the managership of the state industries, permanent and specialized personnel and promotion of national programs for the development of the small-scale wood elaboration and wood selling industrial units are some of the solutions for the above problems that could be suggested.

Biodiversity: role of non-timber forest products in food security ...

African Journals Online (AJOL)

Non-timber forest products (NTFPS) are biological materials from the ecosystem which range from plants, parts of plants, fungi, animals and animal products that are consumed either as food, condiments, spices or medicine. NTFPS have been identified to play an important role in providing primary health and nutritional ...

Projection of U.S. forest sector carbon sequestration under U.S. and global timber market and wood energy consumption scenarios, 2010-2060

Science.gov (United States)

Prakash Nepal; Peter J. Ince; Kenneth E. Skog; Sun J. Chang

2012-01-01

This study provides a modeling framework to examine change over time in U.S. forest sector carbon inventory (in U.S. timberland tree biomass and harvested wood products) for alternative projections of U.S. and global timber markets, including wood energy consumption, based on established IPCC/RPA scenarios. Results indicated that the U.S. forest sector’s projected...

Sustainable production of wood and non-wood forest products: Proceedings of IUFRO Division 5 Research Groups 5.11 and 5.12, Rotorua, New Zealand, March 11–15, 2003.

Science.gov (United States)

E.M. Donoghue; G.L. Benson; J.L. Chamberlain

2004-01-01

This proceedings is a collection of 18 papers and extended abstracts based on talks presented at the International Union of Forest Research Organizations (IUFRO) All Division 5 Conference, held in Rotorua, New Zealand, March 11–15, 2003. This conference emphasized the many ways that forest products research can contribute to sustainable choices in forest management....

Effect of non-tariff barriers on secondary processed wood product trade: New Zealand exports to the United States, China and Japan

Science.gov (United States)

James A. Turner; Joseph Buongiorno; Shushuai Zhu; Frances Maplesden

2008-01-01

Secondary processed wood products - builder's carpentry and joinery, moldings and millwork, wooden furniture, and prefabricated buildings - have grown significantly in importance in the global trade of wood products. At the same time there has been increased use of non-tariff barriers to restrict their trade.  These barriers could have an important impact on the...

Colorimetric characterization of three wood species from the amazon forest

Directory of Open Access Journals (Sweden)

Sâmia Valéria dos Santos Barros

2014-09-01

Full Text Available The aim of this study was to analyze wood color variability in the (radial, tangential and transversal anatomic sections of Breu-vermelho, Tauari-vermelho and Pequiarana species through quantitative colorimetry using CIELAB color system. Such species come from a forest sustainable area of Thousand Precious Woods Company, located in Itacoatiara in the Amazon region of Brazil. Five wood samples from each species were selected so as to determine the following colorimetric parameters: L*, a*, b*, C e h*. In addition, 225 measurements were carried out with Konica Minolta CM-5 spectrophotometer connected to the computer. Results pointed out to statistical differences in the colorimetric parameters and also a low saturation in a* in the analyzed species. According to the cluster gathering, Breu-vermelho wood presents olive and/or grayish pink color, Tauari-vermelho is pinkish-gray and Pequiarana is grayish-pink and/or pinkish-gray. Such species presented differences in color among the three anatomic sections cited above and were also influenced by the yellow color defined in b* parameter. To summarize, colorimetric analysis to establish wood color is a simple procedure which may be used from the sawing of the logs until their final exploitation enabling value aggregation to the final product.

The Effect of China’s New Circular Collective Forest Tenure Reform on Household Non-Timber Forest Product Production in Natural Forest Protection Project Regions

Directory of Open Access Journals (Sweden)

Yang Ren

2018-04-01

Full Text Available The implementation of China’s natural forest protection project (Protection Project in 1998 changed households’ forestry production modes in project regions, and China’s new circular collective forest tenure reform (Tenure Reform has been implemented since 2003 with the goal of motivating household forestry production and increasing household income from forests. Policymakers expect that Tenure Reform could also stimulate households to engage in non-timber forest products (NTFPs production in Protection Project regions. However, only a few studies have investigated the effect of Tenure Reform on household NTFP production in Protection Project regions. To fill this gap, we built an integrative conceptual framework and estimated a corresponding structural equation model (SEM using survey data from 932 households in Protection Project regions in southwestern China. In our research framework, there are four factors, including household characteristics, labour and social capital, forestland characteristics, and the Tenure Reform, affecting household NTFP production. The results substantiate that Tenure Reform has had a significant positive effect on household NTFP production. Additionally, household and forestland characteristics have promoted household NTFP production, but quantitatively less than Tenure Reform. This report can be used to inform the government that future investment in Tenure Reform still needs to be enhanced, and policy enforcement still needs to be strengthened.

2009 Wood and Fiber Product Seminar : VTT and USDA joint activity

Science.gov (United States)

Ali Harlin; Minna Vikman

2010-01-01

Foward -- The development of high-value wood and fiber products is one of the most important challenges currently facing the forest industry. Traditional pulp and paper products are on a critical path in developed countries with prices and markets decreasing. Finland and the USA have faced the same problem, which is a fundamental reason for Industrial Biomaterials...

Climate, economic, and environmental impacts of producing wood for bioenergy

Science.gov (United States)

Birdsey, Richard; Duffy, Philip; Smyth, Carolyn; Kurz, Werner A.; Dugan, Alexa J.; Houghton, Richard

2018-05-01

Increasing combustion of woody biomass for electricity has raised concerns and produced conflicting statements about impacts on atmospheric greenhouse gas (GHG) concentrations, climate, and other forest values such as timber supply and biodiversity. The purposes of this concise review of current literature are to (1) examine impacts on net GHG emissions and climate from increasing bioenergy production from forests and exporting wood pellets to Europe from North America, (2) develop a set of science-based recommendations about the circumstances that would result in GHG reductions or increases in the atmosphere, and (3) identify economic and environmental impacts of increasing bioenergy use of forests. We find that increasing bioenergy production and pellet exports often increase net emissions of GHGs for decades or longer, depending on source of feedstock and its alternate fate, time horizon of analysis, energy emissions associated with the supply chain and fuel substitution, and impacts on carbon cycling of forest ecosystems. Alternative uses of roundwood often offer larger reductions in GHGs, in particular long-lived wood products that store carbon for longer periods of time and can achieve greater substitution benefits than bioenergy. Other effects of using wood for bioenergy may be considerable including induced land-use change, changes in supplies of wood and other materials for construction, albedo and non-radiative effects of land-cover change on climate, and long-term impacts on soil productivity. Changes in biodiversity and other ecosystem attributes may be strongly affected by increasing biofuel production, depending on source of material and the projected scale of biofuel production increases.

Comparing energy use and environmental emissions of reinforced wood doors and steel doors

Science.gov (United States)

Lynn Knight; Melissa Huff; Janet I. Stockhausen; Robert J. Ross

2005-01-01

The USDA Forest Service Forest Products Laboratory has patented a technology that incorporates fiberglass-reinforced wood into the structure of wood doors and other wood building products. The process of reinforcing wood doors with epoxy and fiberglass increases the strength and durability of the product. Also, it allows the use of low-value, small-diameter wood which...

Biorefinery opportunities for the forest products industries

Science.gov (United States)

Alan W. Rudie

2013-01-01

Wood residues offer biorefinery opportunities for new products in our industries including fuel and chemicals. But industry must have two capabilities to succeed with biorefineries. Most forest products companies already have the first capability: knowing where the resource is, how to get it, and how much it will cost. They will need to integrate the acquisition of...

Characteristics and utilization of non-wood pulp and paper; Himokuzai pulp / kami no tokucho to sono riyo

Energy Technology Data Exchange (ETDEWEB)

Hara, H. [Mishima Paper Co. Ltd., Shizuoka (Japan)

1998-09-01

The reasons, difficulty in the usage, and the methods of use of non-wood papers are discussed. Non-wood papers sold in Japan are arranged basing on published data. The type of non-wood paper classified as special printing paper makes up the majority, and there are a variety of other products such as printing board, coated paper, thin paper, wrapping paper, functional paper, and watercolor paper. Kenaf and cotton are used in large quantities as non-wood plants for paper production, and use of bagasse and bamboo is increasing. Non-wood paper are used in consideration of environmental and resources problems and for utilizing the special features of non-wood fiber, and the characteristics of non-wood pulp and the effect of non-wood paper are discussed in this report. It is expected that papers utilizing the characteristics of non-wood paper will be developed. Non-wood papers are substitutions for various papers produced from wood pulp, and the fundamental point is the method of improving the original quality and paper quality by combining with non-wood pulp. 11 refs., 4 figs., 3 tabs.

OPTIMIZATION METHODS IN TRANSPORTATION OF FOREST PRODUCTS

Directory of Open Access Journals (Sweden)

Selçuk Gümüş

2008-04-01

Full Text Available Turkey has total of 21.2 million ha (27 % forest land. In this area, average 9 million m3 of logs and 5 million stere of fuel wood have been annually produced by the government forest enterprises. The total annual production is approximately 13million m3 Considering the fact that the costs of transporting forest products was about . 160 million TL in the year of 2006, the importance of optimizing the total costs in transportation can be better understood. Today, there is not common optimization method used at whole transportation problems. However, the decision makers select the most appropriate methods according to their aims.Comprehending of features and capacity of optimization methods is important for selecting of the most appropriate method. The evaluation of optimization methods that can be used at forest products transportation is aimed in this study.

Carbon storage in harvested wood products for Ireland 1961–2009

International Nuclear Information System (INIS)

Donlan, Jennifer; Skog, Kenneth; Byrne, Kenneth A.

2012-01-01

Forests are significant stores of carbon (C). This has been recognised by the United Nations Framework Convention on Climate Change and forests are one of the sectors which are included in national greenhouse gas (GHG) inventories. Some of this C pool remains in wood after harvest and can remain in use for long periods of time. Accounting for the C stored in harvested wood products (HWP) can potentially contribute to GHG mitigation. A model was developed for this research to estimate C stocks and flows in HWP in Ireland for the years 1961–2009. The change in carbon stocks in HWP were estimated on an annual basis and shown to increase between 1961 and 2009. This increase in annual net additions to C stocks is the result of an increase in domestic harvest (and the resulting inflow into HWP pool) and an increase in HWP going to end uses with longer half-lives. This model (using a Tier II method) is an improvement to previous national estimates (using the Tier I method). Uncertainty was reduced by utilizing national data. This work shows that HWP has considerable potential to support GHG mitigation in Ireland. Inclusion of HWP in Ireland's National Inventory Report (NIR) would give a more comprehensive picture of how the Irish forest sector is mitigating GHG emissions. This model will be incorporated into CARBWARE (Black 2008), the model used to estimate C stored in each of the 5 forest pools, of current and future Irish forests. -- Highlights: ► A model was developed for C stocks in Harvested Wood Products (HWP) in Ireland. ► Uncertainty was reduced from previous estimates by using national and end use data. ► HWP C stocks estimated on an annual basis increased in years 1961–2009. ► This was caused by increased in harvest and products with longer half-lives. ► HWP has considerable potential to support GHG mitigation in Ireland.

Marketing of Non-Timber Forest Products in Kajola Local ...

African Journals Online (AJOL)

Marketing of Non-Timber Forest Products in Kajola Local Government Area of Oyo State, Nigeria. ... International Journal of Tropical Agriculture and Food Systems ... The results of the marketing margin reveal that charcoal commanded the highest margin of ₦2500, followed by bush meat (₦300), while wrapping had the ...

Insight into trade-off between wood decay and parasitism from the genome of a fungal forest pathogen

Energy Technology Data Exchange (ETDEWEB)

Olson, Ake; Aerts, Andrea; Asiegbu, Fred; Belbahri, Lassaad; Bouzid, Ourdia; Broberg, Anders; Canback, Bjorn; Coutinho, Pedro M.; Cullen, Dan; Dalman, Kerstin; Deflorio, Giuliana; van Diepen, Linda T. A.; Dunand, Christophe; Duplessis, Sebastien; Durling, Mikael; Gonthier, Paolo; Grimwood, Jane; Fossdal, Carl Gunnar; Hansson, David; Henrissat, Bernard; Hietala, Ari; Himmelstrand, Kajsa; Hoffmeister, Dirk; Hogberg, Nils; James, Timothy Y.; Karlsson, Magnus; Kohler, Annegret; Lucas, Susan; Lunden, Karl; Morin, Emmanuelle; Murat, Claude; Park, Jongsun; Raffaello, Tommaso; Rouze, Pierre; Salamov, Asaf; Schmutz, Jeremy; Solheim, Halvor; Stahlberg, Jerry; Velez, Heriberto; de Vries, Ronald P.; Wiebenga, Ad; Woodward, Steve; Yakovlev, Igor; Garbelotto, Matteo; Martin, Francis; Grigoriev, Igor V.; Stenlid, Jan

2012-01-01

Parasitism and saprotrophic wood decay are two fungal strategies fundamental for succession and nutrient cycling in forest ecosystems. An opportunity to assess the trade-off between these strategies is provided by the forest pathogen and wood decayer Heterobasidion annosum sensu lato. We report the annotated genome sequence and transcript profiling, as well as the quantitative trait loci mapping, of one member of the species complex: H. irregulare. Quantitative trait loci critical for pathogenicity, and rich in transposable elements, orphan and secreted genes, were identified. A wide range of cellulose-degrading enzymes are expressed during wood decay. By contrast, pathogenic interaction between H. irregulare and pine engages fewer carbohydrate-active enzymes, but involves an increase in pectinolytic enzymes, transcription modules for oxidative stress and secondary metabolite production. Our results show a trade-off in terms of constrained carbohydrate decomposition and membrane transport capacity during interaction with living hosts. Our findings establish that saprotrophic wood decay and necrotrophic parasitism involve two distinct, yet overlapping, processes.

RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

Energy Technology Data Exchange (ETDEWEB)

J. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

2004-08-04

The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. We are currently estimating the acreage of lands in VA, WV, KY, OH, and PA mined under SMCRA and reclaimed to non-forested post-mining land uses that are not currently under active management, and therefore can be considered as available for carbon sequestration. To determine actual sequestration under different forest management scenarios, a field study was installed as a 3 x 3 factorial in a random complete block design with three replications at each of three locations, Ohio, West Virginia, and Virginia. The treatments included three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). Each individual treatment plot is 0.5 acres. Each block of nine plots requires 4.5 acres, and the complete installation at each site requires 13.5 acres. The plots at all three locations have been installed and the plot corners marked with PVC stakes. GPS coordinates of each plot have been collected. Soil samples were collected from each plot to characterize the sites prior to treatment. Baseline soil carbon was determined for each of the eighty-one plots. Fertility analysis of soil samples was completed and these data were used to prepare fertilizer prescriptions and the pre-designated plots were fertilized. We also evaluated economic-based policy instruments that are designed to mitigate the reforestation burden borne by the owner of reclaimed mined land. Results suggest that although profitability of reforestation of these previously reclaimed mine lands may be achievable on better sites under lower interest rates, substantial payments would be required to reach &apos

Informing the improvement of forest products durability using small angle neutron scattering

Science.gov (United States)

Nayomi Plaza Rodriguez; Sai Venkatesh Pingali; Shuo Qian; William T. Heller; Joseph E. Jakes

2016-01-01

A better understanding of how wood nanostructure swells with moisture is needed to accelerate the development of forest products with enhanced moisture durability. Despite its suitability to study nanostructures, small angle neutron scattering (SANS) remains an underutilized tool in forest products research. Nanoscale moisture-induced structural changes in intact and...

Modeling decay rates of dead wood in a neotropical forest.

Science.gov (United States)

Hérault, Bruno; Beauchêne, Jacques; Muller, Félix; Wagner, Fabien; Baraloto, Christopher; Blanc, Lilian; Martin, Jean-Michel

2010-09-01

Variation of dead wood decay rates among tropical trees remains one source of uncertainty in global models of the carbon cycle. Taking advantage of a broad forest plot network surveyed for tree mortality over a 23-year period, we measured the remaining fraction of boles from 367 dead trees from 26 neotropical species widely varying in wood density (0.23-1.24 g cm(-3)) and tree circumference at death time (31.5-272.0 cm). We modeled decay rates within a Bayesian framework assuming a first order differential equation to model the decomposition process and tested for the effects of forest management (selective logging vs. unexploited), of mode of death (standing vs. downed) and of topographical levels (bottomlands vs. hillsides vs. hilltops) on wood decay rates. The general decay model predicts the observed remaining fraction of dead wood (R2 = 60%) with only two biological predictors: tree circumference at death time and wood specific density. Neither selective logging nor local topography had a differential effect on wood decay rates. Including the mode of death into the model revealed that standing dead trees decomposed faster than downed dead trees, but the gain of model accuracy remains rather marginal. Overall, these results suggest that the release of carbon from tropical dead trees to the atmosphere can be simply estimated using tree circumference at death time and wood density.

Riparian forests, a unique but endangered ecosystem in Benin

NARCIS (Netherlands)

Natta, A.K.; Sinsin, B.; Maesen, van der L.J.G.

2002-01-01

Riparian forests are often small in area, but are of extreme ecological and economic value for local people. The interest of riparian forests lies in their resources: basically fertile and moist soils, water, wood and non-timber forest products that are utilised by neighbouring populations to

Non-timber forest products in Central Appalachia: market opportunities for rural development (poster abstract)

Science.gov (United States)

A.L. Hammett; J.L. Chamberlain

1999-01-01

The gathering of forest products has supplemented the incomes of Central Appalachia residents for many generations. Non-timber forest products (NTFPs) can be grouped within four general categories: edibles such as mushrooms; medicinal and dietary supplements, including ginseng, gingko, and St. John?s wort; floral products such as moss, grape vines, and ferns; and...

Wood phenology, not carbon input, controls the interannual variability of wood growth in a temperate oak forest.

Science.gov (United States)

Delpierre, Nicolas; Berveiller, Daniel; Granda, Elena; Dufrêne, Eric

2016-04-01

Although the analysis of flux data has increased our understanding of the interannual variability of carbon inputs into forest ecosystems, we still know little about the determinants of wood growth. Here, we aimed to identify which drivers control the interannual variability of wood growth in a mesic temperate deciduous forest. We analysed a 9-yr time series of carbon fluxes and aboveground wood growth (AWG), reconstructed at a weekly time-scale through the combination of dendrometer and wood density data. Carbon inputs and AWG anomalies appeared to be uncorrelated from the seasonal to interannual scales. More than 90% of the interannual variability of AWG was explained by a combination of the growth intensity during a first 'critical period' of the wood growing season, occurring close to the seasonal maximum, and the timing of the first summer growth halt. Both atmospheric and soil water stress exerted a strong control on the interannual variability of AWG at the study site, despite its mesic conditions, whilst not affecting carbon inputs. Carbon sink activity, not carbon inputs, determined the interannual variations in wood growth at the study site. Our results provide a functional understanding of the dependence of radial growth on precipitation observed in dendrological studies. © 2015 The Authors. New Phytologist © 2015 New Phytologist Trust.

Cone calorimeter tests of wood composites

Science.gov (United States)

Robert H. White; Kuma Sumathipala

2013-01-01

The cone calorimeter is widely used for the determination of the heat release rate (HRR) of building products and other materials. As part of an effort to increase the availability of cone calorimeter data on wood products, the U.S. Forest Products Laboratory and the American Wood Council conducted this study on composite wood products in cooperation with the Composite...

Managing forests because carbon matters: integrating energy, products, and land management policy

Science.gov (United States)

Robert W. Malmsheimer; James L. Bowyer; Jeremy S. Fried; Edmund Gee; Robert Izlar; Reid A. Miner; Ian A. Munn; Elaine Oneil; William C. Stewart

2011-01-01

The United States needs many different types of forests: some managed for wood products plus other benefits, and some managed for nonconsumptive uses and benefits. The objective of reducing global greenhouse gases (GHG) requires increasing carbon storage in pools other than the atmosphere. Growing more forests and keeping forests as forests are only part of the...

Environmental impact assessment of wood ash utilization in forest road construction and maintenance--A field study.

Science.gov (United States)

Oburger, Eva; Jäger, Anna; Pasch, Alexander; Dellantonio, Alex; Stampfer, Karl; Wenzel, Walter W

2016-02-15

The ever increasing use of wood material as fuel for green energy production requires innovative, environmentally safe strategies for recycling of the remaining wood ash. Utilizing wood ash in forest road construction and maintenance to improve mechanical stability has been suggested as a feasible recycling option. To investigate the environmental impact of wood ash application in forest road maintenance, a two-year field experiment was conducted at two Austrian forest sites (Kobernausserwald (KO) (soil pH 5.5) and Weyregg (WE) (pH 7.7)) differing in their soil chemical properties. Two different ashes, one produced by grate incineration (GA) and the other by fluidized bed incineration in a mixture with 15 vol% burnt lime (FBA), were incorporated in repeated road sections at a 15:85% (V/V) ash-to-soil rate. Leaching waters from the road body were collected and analyzed for 32 environmentally relevant parameters over two years. Upon termination of the experiment, sub-road soil samples were collected and analyzed for ash-related changes in soil chemistry. Even though a larger number of parameters was affected by the ash application at the alkaline site (WE), we observed the most pronounced initial increases of pH as well as Al, As, Fe, Mn, Ni, Co, Cu, Mo, and NO2(−) concentrations in leachates beneath GA-treated road bodies at Kobernausserwald due to the lower soil buffer capacity at this site. Despite the observed effects our results indicate that, when specific requirements are met (i.e. appropriate ash quality, sufficient soil buffer capacity below the road body, and single time-point ash incorporation within several decades), wood ash application in forest road construction is generally environmentally acceptable.

Influences on wood load in mountain streams of the Bighorn National Forest, Wyoming, USA.

Science.gov (United States)

Nowakowski, Amy L; Wohl, Ellen

2008-10-01

We documented valley and channel characteristics and wood loads in 19 reaches of forested headwater mountain streams in the Bighorn National Forest of northern Wyoming. Ten of these reaches were in the Upper Tongue River watershed, which has a history of management including timber harvest, tie floating, and road construction. Nine reaches were in the North Rock Creek watershed, which has little history of management activities. We used these data to test hypotheses that (i) valley geometry correlates with wood load, (ii) stream gradient correlates with wood load, and (iii) wood loads are significantly lower in managed watersheds than in otherwise similar unmanaged watersheds. Statistical analyses of the data support the first and third hypotheses. Stream reaches with steeper valley side slopes tend to have higher wood loads, and reaches in managed watersheds tend to have lower wood loads than reaches in unmanaged watersheds. Results do not support the second hypothesis. Shear stress correlated more strongly with wood load than did stream gradient, but statistical models with valley-scale variables had greater explanatory power than statistical models with channel-scale variables. Wood loads in stream reaches within managed watersheds in the Bighorn National Forest tend to be two to three times lower than wood loads in unmanaged watersheds.

Wood product industry - present state and studies of the development alternatives; Puuteollisuuden nykytilan ja haasteiden arviointia

Energy Technology Data Exchange (ETDEWEB)

Holmijoki, O.; Paajanen, T.; Kairi, M.

2007-07-01

In this research project the development of the wood products industry and its operating environment in Finland was studied using statistical data mainly from years 1995 - 2003. In this context, the wood products industry includes the sawmilling industry, the plywood and other wood panel industry, prefabricated wooden housing and the building joinery industry, wood packing manufacture and the manufacture of other wooden products. The development of the wood products industry and its operating environment has been estimated by combining statistical data about the business economy, production economy and the national economy from the Central Statistical Office of Finland together with data from the Finnish Forest Research Institute. Based on statistical data, the wood product markets, profitability and cost structure of branches, input market, use of labour force and investments have been studied. The economic importance of the wood products industry has been estimated at a national and a local level. Challenges facing wood products industry branches have been analysed using example calculations based on input-output theory. In the evaluation method, the business environment of the wood products industry branches and related branches, have been described with a use table at basic prices commonly using in the national economy. This method has enabled the direct and indirect effects of simultaneous quantity and price changes occurring in the wood product markets and markets related to the wood product industry, to be analysed. In the example calculations, variation of sawn timber production and log import, as well as the increments of sawn timber upgrading, wood product usage in building, wood panel production and purchase energy price, were reviewed

Does participatory forest management promote sustainable forest utilisation in Tanzania?

DEFF Research Database (Denmark)

Treue, Thorsten; Ngaga, Y.M.; Meilby, Henrik

2014-01-01

Over the past 20 years, Participatory Forest Management (PFM) has become a dominant forest management strategy in Tanzania, covering more than 4.1 million hectares. Sustainable forest use and supply of wood products to local people are major aims of PFM. This paper assesses the sustainability...... of forest utilisation under PFM, using estimates of forest condition and extraction rates based on forest inventories and 480 household surveys from 12 forests; seven under Community Based Forest Management (CBFM), three under Joint Forest Management (JFM) and two under government management (non......-PFM). Extraction of products is intense in forests close to Dar es Salaam, regardless of management regime. Further from Dar es Salaam, harvesting levels in forests under PFM are, with one prominent exception, broadly sustainable. Using GIS data from 116 wards, it is shown that half of the PFM forests in Tanzania...

Where will the wood come from? Plantation forests and the role of biotechnology.

Science.gov (United States)

Fenning, Trevor M; Gershenzon, Jonathan

2002-07-01

Wood is almost as important to humanity as food, and the natural forests from which most of it is harvested from are of enormous environmental value. However, these slow-growing forests are unable to meet current demand, resulting in the loss and degradation of forest. Plantation forests have the potential to supply the bulk of humanity's wood needs on a long-term basis, and so reduce to acceptable limits the harvest pressures on natural forests. However, if they are to be successful, plantation forests must have a far higher yield of timber than their natural counterparts, on much shorter rotation times. To achieve this in reasonable time, biotechnology must be applied to the tree-improvement process, for which large increases in public and private capital investment are needed. However, additional obstacles exist in the form of opposition to plantations, some forest ecocertification schemes, and concerns about aspects of forest biotechnology, especially genetic engineering. It is the intention of this article to explain, in detail, why plantation forests are needed to sustainably meet the world's demand for wood, why they are not being developed fast enough, and why the application of biotechnology to tree improvement is essential to speeding up this process.

Wood adhesives : vital for producing most wood products

Science.gov (United States)

Charles R. Frihart

2011-01-01

A main route for the efficient utilization of wood resources is to reduce wood to small pieces and then bond them together (Frihart and Hunt 2010). Although humankind has been bonding wood since early Egyptian civilizations, the quality and quantity of bonded wood products has increased dramatically over the past 100 years with the development of new adhesives and...

Bacteria associated with decomposing dead wood in a natural temperate forest.

Science.gov (United States)

Tláskal, Vojtech; Zrustová, Petra; Vrška, Tomáš; Baldrian, Petr

2017-12-01

Dead wood represents an important pool of organic matter in forests and is one of the sources of soil formation. It has been shown to harbour diverse communities of bacteria, but their roles in this habitat are still poorly understood. Here, we describe the bacterial communities in the dead wood of Abies alba, Picea abies and Fagus sylvatica in a temperate natural forest in Central Europe. An analysis of environmental factors showed that decomposing time along with pH and water content was the strongest drivers of community composition. Bacterial biomass positively correlated with N content and increased with decomposition along with the concurrent decrease in the fungal/bacterial biomass ratio. Rhizobiales and Acidobacteriales were abundant bacterial orders throughout the whole decay process, but many bacterial taxa were specific either for young (<15 years) or old dead wood. During early decomposition, bacterial genera able to fix N2 and to use simple C1 compounds (e.g. Yersinia and Methylomonas) were frequent, while wood in advanced decay was rich in taxa typical of forest soils (e.g. Bradyrhizobium and Rhodoplanes). Although the bacterial contribution to dead wood turnover remains unclear, the community composition appears to reflect the changing conditions of the substrate and suggests broad metabolic capacities of its members. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Empowering Women and Ethnic Minority Groups to Collectively Market non Timber Forest Products from Community Forests in Cameroon

NARCIS (Netherlands)

Eijnatten, van Judith; Mala, William Armand; Ingram, V.J.; Belibi, M.B.

2016-01-01

Community forestry (CF) was introduced in Cameroon in 1994 as a way to reduce poverty and enhance sustainable forest management. CF activities have primarily focused on timber exploitation rather than non-timber forest product (NTFP) collection processing or marketing. The study reports on a two

A Review of Relationships Between Wood Quality and Silvicultural Practices

Directory of Open Access Journals (Sweden)

Tomy Listyanto

2009-07-01

Full Text Available The effect of silviculture on wood quality has been approached from different perspectives. This relationship is being a critical concern of forest managers, landowners, and also researchers. Reliable information is needed to support forest managers in predicting the consequences of various silvicultural practices in terms of quantity and wood quality. Wood has beed used for a variety of products. Each product has particular requirements regarding quality. The variation of wood quality requirement allows industries to decide to use timber resource appropriate for their products. Silvicultural practives cover all treatments applied in forest stand management especially to improve the quality of stand, including manipulation of the availability of sunlight, nutrient and water by using several treatments such as thinning, control of spacing, fertilizing, and pruning. The quality of stand is aimed to achieve particular forest management objectives including higher wood quality. There is no broad generalization regarding the relation between silvicultural practice and wood quality. Many investigators showed positive results in relation to producing high quality of wood products, while other researchers revealed negative effects. Reliable information is needed to support forest managers in predicting the consequences of various silvicultural practices in relation to the wood quantity and quality. Continuous research is needed to find methods of producing wood of high quality based on silvicultural practices and genetic improvement which can be used in wider area by considering limitation including environment and geographic variation.

Perceptions on the Importance of Forest Sector Innovations: Biofuels, Biomaterials, or Niche Products?

Directory of Open Access Journals (Sweden)

T. Stern

2018-05-01

Full Text Available New innovations are called for to renew the European forest sector into bioeconomy. However, little research exists on how the industry innovativeness is publicly perceived. Using data collected with an online questionnaire in four European countries, we investigate perceptions related to forest sector innovations on 13 current and new bioeconomy-related products and services. Altogether, 218 valid responses were received in 2015, and the data were analysed using descriptive statistics, performance-importance analysis, and Gartner’s innovation hype cycle. Based on our results, the respondents were in the strongest agreement that the forest sector has since the year 2000 has produced innovations related to wood building systems, construction materials, and wood composites. In the next 15 years, they foresaw a decline in innovations related to biofuels and paper products. The European forest sector also has future potential in wood construction, which is likely related to international policy targets related to carbon mitigation and capture. The observed variation in perceptions among the respondents on forest sector innovativeness calls for strengthening industry R&D, as well as by improving societal awareness of ongoing innovation projects by developing better communication.

DecAID advisor: a tool for managing snags, down wood and wood decay in PNW forests.

Science.gov (United States)

Bruce G. Marcot; Grant Gunderson; Kim Mellen; Janet L. Ohmann

2004-01-01

Past tools for modeling and setting guidelines for snag and down wood management have been based on theory, professional judgment, models of wildlife species use as habitat and empirical data. However, recent studies reveal that guidelines for amounts of snags and down wood on national forests of Washington and Oregon may have been lower than the new field data on use...

Effects of riparian buffer width on wood loading in headwater streams after repeated forest thinning

Science.gov (United States)

Julia I. Burton; Deanna H. Olson; Klaus J. Puettmann

2016-01-01

Forested riparian buffer zones are used in conjunction with upland forest management, in part, to provide for the recruitment for large wood to streams. Small headwater streams account for the majority of stream networks in many forested regions. Yet, our understanding of how riparian buffer width influences wood dynamics in headwater streams is relatively less...

Forest management and the diversity of wood-inhabiting fungi

Science.gov (United States)

Daniel L. Lindner Czederpiltz; Glen R. Stanosz; Harold H. Burdsall

1999-01-01

Since the summer of 1996, a project has been underway at the University of Wisconsin-Madison,Dept. of Plant Pathology, to determine how different forest management regimes can affect the diversity of fungi found in northern hardwood forests. This report is an introduction to this project's goals, objectives and methods. A particular group of fungi, the wood-...

Ecological and biological considerations for sustainable management of non-timber forest products in northern forests

Science.gov (United States)

Luc C. Duchesne; John C. Zasada; Iain. Davidson-Hunt

2001-01-01

With a current output of over $241 million per year, non-timber forest products (NTFPs) contribute significantly to the welfare of rural and First Nations communities in Canada. Maple sap products, wild mushrooms, and wild fruits are the most important NTFPs for consumption both in Canada and abroad. However, because of increased access to international markets by...

Forest Products: Apparatus for Removing Bark from Whole Logs

International Nuclear Information System (INIS)

Poole, Lauren; Recca, Lee

1999-01-01

Order this fact sheet now to learn how replacing the ''closed drum'' debarking technology method used in the forest industry with the ''open drum'' method saves time and production costs, and increases the economic value of wood products by inflicting less damage on logs so that they can be used for high-value economic products

Accounting for forest carbon pool dynamics in product carbon footprints: Challenges and opportunities

International Nuclear Information System (INIS)

Newell, Joshua P.; Vos, Robert O.

2012-01-01

Modification and loss of forests due to natural and anthropogenic disturbance contribute an estimated 20% of annual greenhouse gas (GHG) emissions worldwide. Although forest carbon pool modeling rarely suggests a ‘carbon neutral’ flux profile, the life cycle assessment community and associated product carbon footprint protocols have struggled to account for the GHG emissions associated with forestry, specifically, and land use generally. Principally, this is due to underdeveloped linkages between life cycle inventory (LCI) modeling for wood and forest carbon modeling for a full range of forest types and harvest practices, as well as a lack of transparency in globalized forest supply chains. In this paper, through a comparative study of U.S. and Chinese coated freesheet paper, we develop the initial foundations for a methodology that rescales IPCC methods from the national to the product level, with reference to the approaches in three international product carbon footprint protocols. Due to differences in geographic origin of the wood fiber, the results for two scenarios are highly divergent. This suggests that both wood LCI models and the protocols need further development to capture the range of spatial and temporal dimensions for supply chains (and the associated land use change and modification) for specific product systems. The paper concludes by outlining opportunities to measure and reduce uncertainty in accounting for net emissions of biogenic carbon from forestland, where timber is harvested for consumer products. - Highlights: ► Typical life cycle assessment practice for consumer products often excludes significant land use change emissions when estimating carbon footprints. ► The article provides a methodology to rescale IPCC guidelines for product-level carbon footprints. ► Life cycle inventories and product carbon footprint protocols need more comprehensive land use-related accounting. ► Interdisciplinary collaboration linking the LCA and

The water footprint of wood for lumber, pulp, paper, fuel and firewood

Science.gov (United States)

Schyns, Joep F.; Booij, Martijn J.; Hoekstra, Arjen Y.

2017-09-01

This paper presents the first estimate of global water use in the forestry sector related to roundwood production for lumber, pulp, paper, fuel and firewood. For the period 1961-2010, we estimate forest evaporation at a high spatial resolution level and attribute total water consumption to various forest products, including ecosystem services. Global water consumption for roundwood production increased by 25% over 50 years to 961 × 109 m3/y (96% green; 4% blue) in 2001-2010. The water footprint per m3 of wood is significantly smaller in (sub)tropical forests compared to temperate/boreal forests, because (sub)tropical forests host relatively more value next to wood production in the form of other ecosystem services. In terms of economic water productivity and energy yield from bio-ethanol per unit of water, roundwood is rather comparable with major food, feed and energy crops. Recycling of wood products could effectively reduce the water footprint of the forestry sector, thereby leaving more water available for the generation of other ecosystem services. Intensification of wood production can only reduce the water footprint per unit of wood if the additional wood value per ha outweighs the loss of value of other ecosystem services, which is often not the case in (sub)tropical forests. The results of this study contribute to a more complete picture of the human appropriation of water, thus feeding the debate on water for food or feed versus energy and wood.

Forest communities in the third millennium: linking research, business, and policy toward a sustainable non-timber forest product sector.

Science.gov (United States)

Iain Davidson-Hunt; Luc C. Duchesne; John C., eds. Zasada

2001-01-01

Contains a wide variety of papers given at the first international conference on non-timber forest products (NTFP) in cold temperate and boreal forests. Focuses on many facets of NTFPs: economics, society, biology, resource management, business development, and others.

Branch Wood Decomposition of Tree Species in a Deciduous Temperate Forest in Korea

Directory of Open Access Journals (Sweden)

Sangsub Cha

2017-05-01

Full Text Available Woody debris, which is supplied by branch litter, is an important component of forest ecosystems as it contains large quantities of organic matter and nutrients. We evaluated changes in branch wood dry weight and nutrient content of six common species (Fraxinus rhynchophylla, Pinus densiflora, Prunus sargentii, Quercus mongolica, Acer pseudosieboldianum, and Symplocos chinensis for. pilosa in a deciduous temperate forest in Korea for 40 months. Branch wood disk samples 1.4–1.6 cm thick were cut, and mass loss was measured over time using the litterbag method. No significant differences in mass loss were recorded among the six tree species. Further, mass loss was negatively correlated with initial lignin concentration and positively correlated with both initial cellulose concentration and wood density for each species. Species with high wood cellulose content had high wood density while the lignin content in wood was relatively low. Accordingly, cellulose contributed to wood density, creating a relatively lower lignin content, and the decreased lignin concentration increased the wood decomposition rate.

Nonindustrial private forest owners' opinions to and awareness of energy wood market and forest-based bioenergy certification. Results of a case study from Finnish Karelia

Energy Technology Data Exchange (ETDEWEB)

Halder, Pradipta; Mei, Qu; Pelkonen, Paavo [Eastern Finland Univ., Joensuu (Finland). School of Forest Sciences; Weckroth, Timo

2012-12-01

Nonindustrial private forest owners (NIPFs) in Finland are important stakeholders of forest management and roundwood supply decisions. Their role will also be significant to supply energy wood to meet Finland's target for renewable energy in the future. The main objectives of this study were to explore the opinions and awareness of the Finnish NIPFs related to the energy wood market and forest-based bioenergy certification issues in Finland and their relevance for future bioenergy policies. A questionnaire-based survey was conducted among NIPFs in Finnish Karelia (N = 79). NIPFs considered price as the main deciding factor in harvesting and selling of energy wood. The present low price of energy wood compared to pulpwood did not motivate them to increase harvesting and selling of energy wood. The NIPFs appeared to be unaware of the forest-based bioenergy certification. However, they expected that such certification schemes would be easy to follow, develop energy wood market, and promote environmentally sound forest management practices in Finland. Private forest owners' associations and personal information letters emerged as the most favored means to disseminate information on forest-based bioenergy certification to the Finnish NIPFs. The study explored the opinions and awareness of the Finnish NIPFs related to energy wood market and forest based bioenergy certification from Finnish Karelia. The conclusions derived from the study might be highly policy-relevant concerning the development of energy wood market and related certification schemes. Future studies should include larger sample size for increasing the representativeness of the findings. (orig.)

Forests between global warming and local wood use

DEFF Research Database (Denmark)

Czeskleba-Dupont, Rolf

2009-01-01

The sustainability of extended energetic wood use in atmospheric burners is questioned because it accelerates global warming for decades and often intensifies local air pollution with serious health impacts. Forest developments in Denmark and Austria are compared, the latter including data...

Instream large wood: Denitrification hotspots with low N2O production

Science.gov (United States)

We examined the effect of instream large wood on denitrification capacity in two contrasting, lower order streams — one that drains an agricultural watershed with no riparian forest and minimal stores of instream large wood and another that drains a forested watershed with an ext...

Simulation of the Effect of Intensive Forest Management on Forest Production in Sweden

Directory of Open Access Journals (Sweden)

Ola Rosvall

2011-03-01

Full Text Available The effects of intensifying the management of 15% of the Swedish forest land on potential future forest production over a 100-year period were investigated in a simulation study. The intensive management treatments, which were introduced over a period of 50 years, were: intensive fertilization of Norway spruce (IntFert; bulking-up Norway spruce elite populations using somatic embryogenesis (SE-seedlings; planting of lodgepole pine, hybrid larch, and Sitka spruce (Contorta, Larch, and Sitka; fertilization with wood ash on peatlands (Wood ash; and conventional fertilization in mature forests (ConFert. Potential sites for applying intensive forest management (IFM to sites with low nature conservation values were determined with a nature conservation score (NCS. Four different scenarios were simulated: “Base scenario”, which aimed at reducing the negative impact on nature conservation values, “Fast implementation”, “No IntFert” (IntFert was not used, and “Large Forest Companies”, where the majority of plots were selected on company land. Total yields during the 100-year simulation period were about 85–92% higher for the intensive forest management scenarios than for the reference scenario (business as usual. In the “No IntFert” scenario total production was 1.8% lower and in the “Large Forest Companies” scenario total production was 4.8% lower than in the “Base scenario”. “Fast implementation” of IFM increased yield by 15% compared to the “Base scenario”. Norway spruce SE-seedlings and IntFert gave the highest yields, measured as total production during the 100-year simulation period, but relative to the yields in the reference scenario, the highest increases in yield were for Contorta. The “Base scenario” and “No IntFert” gave the highest yields for plots with the lowest NCS, but plots with higher NCS had to be used in the “Fast implementation” and “Large Forest Companies” scenarios. More than

Developing estimates of potential demand for renewable wood energy products in Alaska

Science.gov (United States)

Allen M. Brackley; Valerie A. Barber; Cassie Pinkel

2010-01-01

Goal three of the current U.S. Department of Agriculture, Forest Service strategy for improving the use of woody biomass is to help develop and expand markets for woody biomass products. This report is concerned with the existing volumes of renewable wood energy products (RWEP) that are currently used in Alaska and the potential demand for RWEP for residential and...

Small-scale production and utilization of wood fuels; Puupolttoaineen pientuotanto ja -kaeyttoe - katsaus tutkimus- projekteihin

Energy Technology Data Exchange (ETDEWEB)

Tuomi, S [Work Efficiency Inst., Rajamaeki (Finland)

1997-12-31

The objective of the research on small-scale production of wood fuels was to promote the forest owners` own utilization and procurement of firewood. The profitability of firewood was improved by developing new farm-tractor mountable equipment and methods for forest owners and small-entrepreneurs for harvesting of first-thinning wood and other small-dimeter wood. Totally new solution for machine felling of small trees and chopwood production were developed to serial production level. Recyclable processing and delivery units were developed for delivery of chopwood. A calculation model for analysing the costs of small-scale production of firewood became ready. A guide on the development of heating-entrepreneur activities, serving the entrepreneurs, was published. The objective of the firewood utilization research was to reduce the technical barriers of the utilization of firewood in small-house and real-estate scales. The main aim was to reduce the flue-gas emissions. The emissions of the fireplaces were reduced by developing the construction of fireplaces, catalytic combustion and heating methods. An automatic stoker-burner was developed for real-estate scale and a boiler series was designed for biofuels

Small-scale production and utilization of wood fuels; Puupolttoaineen pientuotanto ja -kaeyttoe - katsaus tutkimus- projekteihin

Energy Technology Data Exchange (ETDEWEB)

Tuomi, S. [Work Efficiency Inst., Rajamaeki (Finland)

1996-12-31

The objective of the research on small-scale production of wood fuels was to promote the forest owners` own utilization and procurement of firewood. The profitability of firewood was improved by developing new farm-tractor mountable equipment and methods for forest owners and small-entrepreneurs for harvesting of first-thinning wood and other small-dimeter wood. Totally new solution for machine felling of small trees and chopwood production were developed to serial production level. Recyclable processing and delivery units were developed for delivery of chopwood. A calculation model for analysing the costs of small-scale production of firewood became ready. A guide on the development of heating-entrepreneur activities, serving the entrepreneurs, was published. The objective of the firewood utilization research was to reduce the technical barriers of the utilization of firewood in small-house and real-estate scales. The main aim was to reduce the flue-gas emissions. The emissions of the fireplaces were reduced by developing the construction of fireplaces, catalytic combustion and heating methods. An automatic stoker-burner was developed for real-estate scale and a boiler series was designed for biofuels

Once upon a time... Dead wood in french forests

International Nuclear Information System (INIS)

Bartoli, Michel; Geny, Bernard

2005-01-01

For many centuries in France, dead wood was an essential source of energy for households. Harvesting dead wood was both authorised - in particular, through allocation of rights of use - and highly regulated. Restrictions on its employment were established by texts ranging from the 1515 royal decree to an implementation decree of 1853 that is still applicable today - its owner must have formally released the wood. It must be dry and lying on the ground. It can be broken only by hand and no means other than human labour can be used to transport it. Furthermore, it cannot be the outcome of an act that caused a stem to dry while standing. In the 19. century, the huge number of trials, some of which went as far as the supreme court, shows just how important dead wood was socially, and much coveted by the paupers who were confronted with increasingly repressive forest police. These trials provide an excellent reflection of a society that harvested all the proceeds of felling. From the end of the 18. century to the middle of the 20., forestry treatises always dealt with removal of dead trees as a priority. Dead wood was for a long time and up to very recently abhorred but latterly has begun to be considered as an important compartment of biodiversity. History shows that it is no surprise that for the time being there is little of it to be found in our forests. (authors)

Energy from wood biomass: The experience of the Brazilian forest sector

Energy Technology Data Exchange (ETDEWEB)

Couto, L. [Universidade Federal de Vicosa (Brazil); Graca, L.R. [Centro Nacional de Pesquisa de Floresta, Colombo (Brazil); Betters, D.R. [Colorado State Univ., Fort Collins, CO (United States)

1993-12-31

Wood biomass is one of the most significant renewable sources of energy in Brazil. Fuelwood and charcoal play a very important role not only for household energy consumption but also for the cement, iron and steel industries. Wood is used as an energy source by the pulp and paper, composite board and other industries of the country, mainly for steam and electricity generation. Ethanol, lignin-based coke and methanol from wood were produced at experimental units in Brazil but were not implemented on a commercial scale. Currently, a new experimental plant using a technology developed in the US is being built in the state of Bahia to generate electricity from Eucalyptus. This technology is a Biomass Integrated Gasification/Gas Turbine process which is expected to make the use of wood biomass economically feasible for electricity generation. Forest plantations are the main source of wood biomass for energy consumption by the Brazilian industrial sector. Fiscal incentives in the 1960s helped the country to begin a massive reforestation program mainly using Eucalyptus and Pinus species. A native species, bracatinga (Mimosa scabrella) has also been used extensively for wood energy plantations in southern Brazil. Technical, economic, social and environmental impacts of these plantation forests are discussed along with a forecast of the future wood energy utilization in Brazil.

Factors affecting distribution of wood, detritus, and sediment in headwater streams draining managed young-growth red alder - Conifer forests in southeast Alaska

Science.gov (United States)

Gomi, T.; Johnson, A.C.; Deal, R.L.; Hennon, P.E.; Orlikowska, E.H.; Wipfli, M.S.

2006-01-01

Factors (riparian stand condition, management regimes, and channel properties) affecting distributions of wood, detritus (leaves and branches), and sediment were examined in headwater streams draining young-growth red alder (Alnus rubra Bong.) - conifer riparian forests (40 years old) remained in channels and provided sites for sediment and organic matter storage. Despite various alder-conifer mixtures and past harvesting effects, the abundance of large wood, fine wood, and detritus accumulations significantly decreased with increasing channel bank-full width (0.5-3.5 m) along relatively short channel distances (up to 700 m). Changes in wood, detritus, and sediment accumulations together with changes in riparian stand characteristics create spatial and temporal variability of in-channel conditions in headwater systems. A component of alder within young-growth riparian forests may benefit both wood production and biological recovery in disturbed headwater stream channels. ?? 2006 NRC.

Evaluation of the contributions of selected non-timber forest products ...

African Journals Online (AJOL)

Evaluation of the contributions of selected non-timber forest products to food security and income generation, in Imo State, Nigeria. ... Data were analyzed using descriptive statistics, Z-test and Foster-Greer-Thorbecke (FGT) metric. The result revealed that 98% of the respondents consumed the three NTFPs as food and ...

Wood decay and the cleanup crew

Science.gov (United States)

Kevin T. Smith; Jessie A. Glaeser

2017-01-01

Arborists are encouraged to recognize the wood-decay process as an important factor in tree health and public safety. Technical experts who develop training materials to recognize wood-decay processes in living trees are frequently forest pathologists. Much of the history of forest pathology was to support production of sound, high-quality timber. That heritage is...

Influence of disturbance on temperate forest productivity

Science.gov (United States)

Peters, Emily B.; Wythers, Kirk R.; Bradford, John B.; Reich, Peter B.

2013-01-01

Climate, tree species traits, and soil fertility are key controls on forest productivity. However, in most forest ecosystems, natural and human disturbances, such as wind throw, fire, and harvest, can also exert important and lasting direct and indirect influence over productivity. We used an ecosystem model, PnET-CN, to examine how disturbance type, intensity, and frequency influence net primary production (NPP) across a range of forest types from Minnesota and Wisconsin, USA. We assessed the importance of past disturbances on NPP, net N mineralization, foliar N, and leaf area index at 107 forest stands of differing types (aspen, jack pine, northern hardwood, black spruce) and disturbance history (fire, harvest) by comparing model simulations with observations. The model reasonably predicted differences among forest types in productivity, foliar N, leaf area index, and net N mineralization. Model simulations that included past disturbances minimally improved predictions compared to simulations without disturbance, suggesting the legacy of past disturbances played a minor role in influencing current forest productivity rates. Modeled NPP was more sensitive to the intensity of soil removal during a disturbance than the fraction of stand mortality or wood removal. Increasing crown fire frequency resulted in lower NPP, particularly for conifer forest types with longer leaf life spans and longer recovery times. These findings suggest that, over long time periods, moderate frequency disturbances are a relatively less important control on productivity than climate, soil, and species traits.

The socioeconomic status of the non-timber forest product subsector ...

African Journals Online (AJOL)

A wide spectrum of non-timber forest products (NTFPs) generally has a remarkable contribution to the household economy in rural areas. Most communities make a living either through their domestic or commercial use. The objective of this study was to review the current status of the NTFP sector and further compile an ...

Successional changes in live and dead wood carbon stores: implications for net ecosystem productivity.

Science.gov (United States)

Janisch, J E; Harmon, M E

2002-02-01

If forests are to be used in CO2 mitigation projects, it is essential to understand and quantify the impacts of disturbance on net ecosystem productivity (NEP; i.e., the change in ecosystem carbon (C) storage with time). We examined the influence of live tree and coarse woody debris (CWD) on NEP during secondary succession based on data collected along a 500-year chronosequence on the Wind River Ranger District, Washington. We developed a simple statistical model of live and dead wood accumulation and decomposition to predict changes in the woody component of NEP, which we call NEP(w). The transition from negative to positive NEP(w), for a series of scenarios in which none to all wood was left after disturbance, occurred between 0 and 57 years after disturbance. The timing of this transition decreased as live-tree growth rates increased, and increased as CWD left after disturbance increased. Maximum and minimum NEP(w) for all scenarios were 3.9 and -14.1 Mg C ha-1 year-1, respectively. Maximum live and total wood C stores of 319 and 393 Mg C ha(-1), respectively, were reached approximately 200 years after disturbance. Decomposition rates (k) of CWD ranged between 0.013 and 0.043 year-1 for individual stands. Regenerating stands took 41 years to attain a mean live wood mass equivalent to the mean mass of CWD left behind after logging, 40 years to equal the mean CWD mass in 500-year-old forest, and more than 150 years to equal the mean total live and dead wood in an old-growth stand. At a rotation age of 80 years, regenerating stands stored approximately half the wood C of the remaining nearby old-growth forests (predominant age 500 years), indicating that conversion of old-growth forests to younger managed forests results in a significant net release of C to the atmosphere.

Increased heat resistance in mycelia from wood fungi prevalent in forests characterized by fire: a possible adaptation to forest fire.

Science.gov (United States)

Carlsson, Fredrik; Edman, Mattias; Holm, Svante; Eriksson, Anna-Maria; Jonsson, Bengt Gunnar

2012-10-01

Forest fires have been the major stand-replacing/modifying disturbance in boreal forests. To adapt to fire disturbance, different strategies have evolved. This study focuses on wood fungi, and a specific adaptation to forest fire: increased heat resistance in their mycelia. Fifteen species of wood fungi were selected and a priori sorted in two groups according to their prevalence in fire-affected environments. The fungi were cultivated on fresh wood and exposed to 100, 140, 180, 220 °C for 5, 10, 15, 20 and 25 min. under laboratory conditions. A clear difference was found among the two groups. Species prevalent in fire-affected habitats had a much higher survival rate over all combinations of time and temperature compared to species associated with other environments. Thus, the results indicate that fire adaptation in terms of increased heat resistance in mycelia occurs in some species of wood fungi. Such adaptation will influence the ecology and population dynamics of wood fungi, as well as having implications for best practices during restoration fires. Copyright © 2012 The British Mycological Society. Published by Elsevier Ltd. All rights reserved.

Coniferous tree plantations in forest conditions-economic analysis of dedicated and semi-dedicated pathways to increase wood production

International Nuclear Information System (INIS)

Rakotoarison, Hanitra; Richter, Claudine; Cailly, Priscilla; Deleuze, Christine; Berthelot, Alain

2015-01-01

To meet growing demand for wood, particularly softwoods, the authors study a number of new silvicultural pathways for planting 3 species: Douglas fir, spruce and maritime pine. The goal of these pathways is to achieve specialised production of either industrial and workable timber, or a mixture of industrial and workable timber with medium-diameter workable timber. Pathways of this type have already been standardised for hardwoods, generally on fertile farmland. In a less fertile forest context, softwoods have a significant potential for woody production but specialized pathways and their profitability have yet to be studied. This article describes the innovative work being done to construct and simulate profitable production, new potential pathways, where plantation density, rotation time, the level of fertility are made to vary using the data from the FCBA test network in conjunction with the FCBA growth models (Oasis for spruce and Douglas fir, Sylveco for maritime pine). Economic data is derived from auction sales statistics and the ONF management and forestry work costs for the period 2012-2015. The Economics module developed by FCBA and ONF on the Capsis platform in the framework of the ICI project (Futurol) was used for the economic simulations. The analyses show that compared to conventional pathways, these pathways generally increase productivity but are nonetheless less profitable than current economic assumptions, although results vary according to species, fertility and the particular pathway. The sensitivity study shows that variations in the price of wood could alter the performance ratings as between conventional and specialised pathways. (authors)

Environmental impact of constructions made of acetylated wood

NARCIS (Netherlands)

van der Lugt, P.; Bongers, F; Vogtländer, J.G.; Eberhardsteiner, J.; Winter, W.; Fadai, A.; Poll, M.

2016-01-01

In the global climate agreements made during COP 21 in Paris, the role of forests and wood products have gained more attention considering their important impact – both negative and positive – through deforestation, forest conservation, afforestation and increasing application of wood in durable

Sales of wood from state forests in 2012

International Nuclear Information System (INIS)

Office National des Forets

2013-01-01

The economic environment in 2012 was adverse, with the consequences of the crisis in sovereign debts in the Euro zone and an 18% decrease in housing starts in France. The drop in sales these conditions entail has in turn led to a 4% decrease in logging volumes from state forests and a 7% decrease in those from community-owned forests. Similarly, the average price has dropped 5%. As a result, the turnover for state forest timber sales has declined by 12%. Consolidated timber supply contracts cover 21% of the volumes and their annual average prices are stable. Finally, stave-wood and fuelwood markets have maintained their vigour. (authors)

The Carbon Impacts of Wood Products

Science.gov (United States)

Richard Bergman; Maureen Puettmann; Adam Taylor; Kenneth E. Skog

2014-01-01

Wood products have many environmental advantages over nonwood alternatives. Documenting and publicizing these merits helps the future competitiveness of wood when climate change impacts are being considered. The manufacture of wood products requires less fossil fuel than nonwood alternative building materials such as concrete, metals, or plastics. By nature, wood is...

Postfire Succession of Ants (Hymenoptera: Formicidae) Nesting in Dead Wood of Northern Boreal Forest.

Science.gov (United States)

Boucher, Philippe; Hébert, Christian; Francoeur, André; Sirois, Luc

2015-10-01

Dead wood decomposition begins immediately after tree death and involves a large array of invertebrates. Ecological successions are still poorly known for saproxylic organisms, particularly in boreal forests. We investigated the use of dead wood as nesting sites for ants along a 60-yr postfire chronosequence in northeastern coniferous forests. We sampled a total of 1,625 pieces of dead wood, in which 263 ant nests were found. Overall, ant abundance increased during the first 30 yr after wildfire, and then declined. Leptothorax cf. canadensis Provancher, the most abundant species in our study, was absent during the first 2 yr postfire, but increased steadily until 30 yr after fire, whereas Myrmica alaskensis Wheeler, second in abundance, was found at all stages of succession in the chronosequence. Six other species were less frequently found, among which Camponotus herculeanus (Linné), Formica neorufibarbis Emery, and Formica aserva Forel were locally abundant, but more scarcely distributed. Dead wood lying on the ground and showing numerous woodborer holes had a higher probability of being colonized by ants. The C:N ratio was lower for dead wood colonized by ants than for noncolonized dead wood, showing that the continuous occupation of dead wood by ants influences the carbon and nitrogen dynamics of dead wood after wildfire in northern boreal forests. © The Authors 2015. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Forest science and technology to reduce atmospheric greenhouse gases - an overview, with emphasis on carbon in Canada's forests

International Nuclear Information System (INIS)

Savidge, R.A.

2001-01-01

The forest as a CO 2 sink comprises, in addition to mature and immature trees, C accumulated in understorey plants, animals, forest soils, peat bogs and wetlands. Estimates of how much carbon (C) is entering and leaving a forest ecosystem cannot be obtained merely by estimating gaseous CO 2 fluxes. The C cycle also involves direct transfer of CO 2 to soil in rain and snow, non-photosynthetic or 'dark' fixation of CO 2 by myriad soil and aquatic micro-organisms, roots, fungi and animals, and loss of C in forms other than CO 2 via air, groundwater flow and runoff. The complexity of the carbon cycle challenges us to develop reliably accurate means of inventorying C accumulation in trees. In productive forests the C of wood can be determined by estimating tree merchantable volume and, by density conversion, mass of dry wood. Percentage C in dry wood varies by species and type of wood, but otherwise C of wood can be readily calculated. The C present in foliage, branches, bark and roots can, as a first approximation, be assumed to be equivalent to that in the merchantable boles. National Forestry Database statistics and our elemental analysis data on total carbon in wood were used to determine how much C is present in and being removed annually from Canadian forests. In 1998 Canada extracted 45 million tonnes of C of wood from 0.5% of its more than 244 million hectares (ha) of productive forest area. That annual harvest contained less than 0.001% of the 6400 gigatonnes of C of wood existing in boles of merchantable trees. However, harvesting over the last three centuries has reduced C content m productive forests to well below 50% of their pre-1700 sink capacity. To refill the sink, it is proposed that a ceiling of 50 million tonnes C of wood be set as the annual allowable cut. Mean temperature increases of as much as 8 o C have been forecast for Canada over the next 100 years. The impact of those increases on tree growth and survival will depend not so much on changes

Non-timber forest products of the North-West District of Guyana

NARCIS (Netherlands)

Andel, T.R. van

2000-01-01

This thesis describes the use of non-timber forest products (NTFPs) by indigenous peoples of northwest Guyana. Part I contains a general analysis of NTFP harvesting in northwest Guyana Part II is an illustrated field guide of the useful plants encountered. Chapter 1: introduction Chapter

Impact of European Union Timber Regulation on Forest Certification Strategies in the Finnish Wood Industry Value Chain

Directory of Open Access Journals (Sweden)

Jani Holopainen

2015-08-01

Full Text Available The aim of this explorative study is to find out how the EU Timber Regulation (EUTR has affected the forest and chain of custody (CoC certification strategies and practices among the Finnish wood industry companies. We are especially interested to find out whether more integrated strategies and collaborative networks have emerged for enhanced communications throughout the industry value chains. This qualitative interview study included both EUTR ex ante and ex post analysis, based on three rounds of managerial and expert interviews during 2011–2015. The results indicate that the EUTR appears to have enforced the supplier–client relations in the Finnish wood industry value chain. The sector still lacks integrated communication strategies with better understanding of customer and stakeholder values, which could contribute to more cohesive communication and marketing efforts reflecting the values of the whole industry. The certification practices are fairly spontaneously implemented following the traditional industry culture, which is not supportive of innovations and gaining competitive advantages in the broader material markets. Furthermore, the existence of two parallel forest certificates (Forest Stewardship Council (FSC and Programme for the Endorsement of Forest Certification (PEFC seems to hamper the effective communication and building of an image of sustainable wood products among customers and end consumers, groups that are also exposed to more general environmental communication, e.g., in the building material markets.

Edge effects on moisture reduce wood decomposition rate in a temperate forest.

Science.gov (United States)

Crockatt, Martha E; Bebber, Daniel P

2015-02-01

Forests around the world are increasingly fragmented, and edge effects on forest microclimates have the potential to affect ecosystem functions such as carbon and nutrient cycling. Edges tend to be drier and warmer due to the effects of insolation, wind, and evapotranspiration and these gradients can penetrate hundreds of metres into the forest. Litter decomposition is a key component of the carbon cycle, which is largely controlled by saprotrophic fungi that respond to variation in temperature and moisture. However, the impact of forest fragmentation on litter decay is poorly understood. Here, we investigate edge effects on the decay of wood in a temperate forest using an experimental approach, whereby mass loss in wood blocks placed along 100 m transects from the forest edge to core was monitored over 2 years. Decomposition rate increased with distance from the edge, and was correlated with increasing humidity and moisture content of the decaying wood, such that the decay constant at 100 m was nearly twice that at the edge. Mean air temperature decreased slightly with distance from the edge. The variation in decay constant due to edge effects was larger than that expected from any reasonable estimates of climatic variation, based on a published regional model. We modelled the influence of edge effects on the decay constant at the landscape scale using functions for forest area within different distances from edge across the UK. We found that taking edge effects into account would decrease the decay rate by nearly one quarter, compared with estimates that assumed no edge effect. © 2014 John Wiley & Sons Ltd.

THE QUANTITY AND TURNOVER OF DEAD WOOD IN PERMANENT FOREST PLOTS IN SIX LIFE ZONES OF VENEZUELA

Science.gov (United States)

Dead wood can be an important component of the carbon pool in many forests, but few measurements have been made of this pool in tropical forests. To fill this gap, we determined the quantity of dead wood (downed and standing dead) in 25 long-term (up to 30 yr) permanent forest pl...

Análise de risco e retorno do setor florestal: produtos da madeira Analysis of risk and return of the forest sector: wood products

Directory of Open Access Journals (Sweden)

Rommel Noce

2005-02-01

Full Text Available O presente trabalho objetivou descrever, analisar e comparar a relação risco/retorno dos produtos madeira serrada, madeira aplainada, madeira laminada, compensado e pasta química de madeira em função do comportamento de seu preço, durante as três últimas décadas, com base na taxa geométrica de crescimento e na dispersão dos preços. De acordo com os resultados, concluiu-se que os únicos produtos que apresentaram relação favorável à captação de recursos durante essas três décadas foram madeira serrada e madeira aplainada.This work aimed to describe, analyze and to compare the relation risk and return of the forest products: sawn wood, planed wood, veneer, plywood and the chemical pulpwood, in function of the behavior of its price, during the three last decades with base in the geometric rate of growth and in the price dispersion. The results indicated that the only products that presented favorable relation to fund raising, during the three decades, were the sawn and planed wood.

A multi-tiered approach for assessing the forestry and wood products industries' impact on the carbon balance.

Science.gov (United States)

Knauf, Marcus

2015-12-01

The forestry and wood products industries play a significant role in CO 2 emissions reduction by increasing carbon stocks in living forest biomass and wood products. Moreover, wood can substitute for fossil fuels. Different methods can be used to assess the impact of regional forestry and wood products industries on regional CO 2 emissions. This article considers three of those methods and combines them into a multi-tiered approach. The multi-tiered approach proposed in this article combines: 1) a Kyoto-Protocol-oriented method focused on changes in CO 2 emissions resulting from regional industrial production, 2) a consumer-oriented method focused on changes in CO 2 emissions resulting from regional consumption, and 3) a value-creation-oriented method focused on changes in CO 2 emissions resulting from forest management and wood usage strategies. North Rhine-Westphalia is both a typical German state and an example of a region where each of these three methods yields different results. It serves as a test case with which to illustrate the advantages of the proposed approach. This case study argues that the choice of assessment methods is essential when developing and evaluating a strategy for reducing CO 2 emissions. Emissions can be reduced through various social and economic processes. Since none of the assessment methods considered above is suitable for all of these processes, only a multi-tiered approach may ensure that strategy development results in an optimal emissions reduction strategy.

The Role of Dead Wood in Maintaining Arthropod Diversity on the Forest Floor

Energy Technology Data Exchange (ETDEWEB)

Hanula, James L. [Dept. of Agriculture Forest Service, Athens, GA (United States). Southern Research Station; Horn, Scott [Dept. of Agriculture Forest Service, Athens, GA (United States). Southern Research Station; Wade, Dale D. [Dept. of Agriculture Forest Service, Athens, GA (United States). Southern Research Station

2006-08-01

Dead wood is a major component of forests and contributes to overall diversity, primarily by supporting insects that feed directly on or in it. Further, a variety of organisms benefit by feeding on those insects. What is not well known is how or whether dead wood influences the composition of the arthropod community that is not solely dependent on it as a food resource, or whether woody debris influences prey available to generalist predators. One group likely to be affected by dead wood is ground-dwelling arthropods. We studied the effect of adding large dead wood to unburned and frequently burned pine stands to determine if dead wood was used more when the litter and understory plant community are removed. We also studied the effect of annual removal of dead wood from large (10-ha) plots over a 5-year period on ground-dwelling arthropods. In related studies, we examined the relationships among an endangered woodpecker that forages for prey on live trees, its prey, and dead wood in the forest. Finally, the results of these and other studies show that dead wood can influence the abundance and diversity of the ground-dwelling arthropod community and of prey available to generalist predators not foraging directly on dead trees.

Assessing radiation doses to the public from radionuclides in timber and wood products

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-10-01

In the event of a nuclear accident involving the release of radionuclides to the biosphere the radioactive contamination of forests can become a significant potential source of public radiation exposure. Two of these accidents - the Kyshtim accident, Urals, USSR (now Russian Federation) in 1957 and the Chernobyl accident, USSR (now Ukraine), in 1986 - resulted in significant contamination of thousands of square kilometres of forested areas with mixtures of radionuclides including long lived fission products such as {sup 137}Cs and {sup 90}Sr. Measurements and modelling of forest ecosystems after both accidents have shown that, following initial contamination, the activity concentration of long lived radionuclides in wood gradually increases over one to two decades and then slowly decreases in the subsequent period. The longevity of the contamination is due to the slow migration and persistent bioavailability of radionuclides in the forest soil profile, which results in long term transfer into wood through the root system of the trees. Another source of contamination is from global radioactive fallout after nuclear weapons tests, but the level of contamination is much lower than that from, for example, the Chernobyl accident. For instance, the level of {sup 137}Cs in wood in Sweden is about 2-5 Bq kg{sup -1} from global fallout. Global values are very similar to the Swedish levels. In contrast, the level of {sup 137}Cs in Swedish wood due to Chernobyl is around 50 Bq kg{sup -1}. Levels in wood from some contaminated areas located in countries of the Former Soviet Union (FSU) are about one to two orders of magnitude higher than this. The data on {sup 137}Cs soil contamination within European territories, originating mainly from the Chernobyl accident, illustrate the scale of the problem. For comparison, residual {sup 137}Cs soil deposition in Europe from global radioactive fallout was in the range 1-4 kBq m{sup -2}. There is concern in several countries about the

A synthesis of the science on forests and carbon for U.S. Forests

Science.gov (United States)

Michael G. Ryan; Mark E. Harmon; Richard A. Birdsey; Christian P. Giardina; Linda S. Heath; Richard A. Houghton; Robert B. Jackson; Duncan C. McKinley; James F. Morrison; Brian C. Murray; Diane E. Pataki; Kenneth E. Skog

2010-01-01

Forests play an important role in the U.S. and global carbon cycle, and carbon sequestered by U.S. forest growth and harvested wood products currently offsets 12-19% of U.S. fossil fuel emissions. The cycle of forest growth, death, and regeneration and the use of wood removed from the forest complicate efforts to understand and measure forest carbon pools and flows....

Trends and Possible Future Developments in Global Forest-Product Markets—Implications for the Swedish Forest Sector

Directory of Open Access Journals (Sweden)

Ragnar Jonsson

2011-01-01

Full Text Available This paper analyzes trends and possible future developments in global wood-product markets and discusses implications for the Swedish forest sector. Four possible futures, or scenarios, are considered, based on qualitative scenario analysis. The scenarios are distinguished principally by divergent futures with respect to two highly influential factors driving change in global wood-product markets, whose future development is unpredictable. These so-called critical uncertainties were found to be degrees to which: (i current patterns of globalization will continue, or be replaced by regionalism, and (ii concern about the environment, particularly climate change, related policy initiatives and customer preferences, will materialize. The overall future of the Swedish solid wood-product industry looks bright, irrespective of which of the four possible futures occurs, provided it accommodates the expected growth in demand for factory-made, energy-efficient construction components. The prospects for the pulp and paper industry in Sweden appear more ambiguous. Globalization is increasingly shifting production and consumption to the Southern hemisphere, adversely affecting employment and forest owners in Sweden. Further, technical progress in information and communication technology (ICT is expected to lead to drastic reductions in demand for newsprint and printing paper. Chemical pulp producers may profit from a growing bio-energy industry, since they could manufacture new, high-value products in integrated bio-refineries. Mechanical pulp producers cannot do this, however, and might suffer from higher prices for raw materials and electricity.

What is the current state of forest product markets and how will they develop in the future?

Science.gov (United States)

Ragnar Jonsson; Elias Hurmekoski; Lauri Hetemaki; Jeffrey Prestemon

2017-01-01

Forest-based industries – pulp and paper, solid wood products, and a number of downstream value-added wood-based manufacturers – have received limited attention in the pursuit of a successful implementation of EU and national bioeconomy strategies. According to Eurostat, the pulp and paper and solid wood products industries accounted for about 4.4% (€277 billion) of...

Climate effects of wood used for bioenergy

Energy Technology Data Exchange (ETDEWEB)

Ros, Jan P.M.; Van Minnen, Jelle G. [Netherlands Environmental Assessment Agency PBL, Bilthoven (Netherlands); Arets, Eric J.M.M. [Alterra, Wageningen University WUR, Wageningen (Netherlands)

2013-08-15

Wood growth and natural decay both take time, and this is an important aspect of sustainability assessments of wood used for energy. Wood taken from forests is a carbon-neutral energy source in the long term, but there are many examples of potential sources of wood used for bioenergy for which net emission reductions are not achieved in 10 to 40 years - the time frame for most climate policy mitigation targets. This is caused by two factors. The first factor relates to the fact that the carbon cycles of wood have a long time span. After final felling, CO2 fixation rates are initially relatively low, but increase again as forests regrow. This regrowth takes many years, sometimes more than a century. Wood residues can either be used or left in the forest. By using them, the emissions from the otherwise decaying residues (taking 2 to 30 years) would be avoided. The second factor concerns the fact that, if the wood is used for bioenergy, then fossil energy emissions are being avoided. However, the direct emission levels from bioenergy are higher than those related to the fossil energy it replaces. These additional emissions also have to be compensated. The carbon debt caused by both factors has to be paid back first, before actual emission reductions can be realised. For wood residues (from harvesting or thinning) that are used to replace coal or oil products, these payback times are relatively short, of the order of 5 to 25 years, mainly depending on location and type of residue (longer if they replace gas). This is also the case when using wood from salvage logging. In most cases, when using wood from final felling directly for energy production, payback times could be many decades to more than a century, with substantial increases in net CO2 emissions, in the meantime. This is especially the case for many forests in Europe, because they are currently an effective carbon sink. Additional felling reduces average growth rates in these forests and thus the sequestration

Emissions from laboratory combustor tests of manufactured wood products

Energy Technology Data Exchange (ETDEWEB)

Wilkening, R.; Evans, M.; Ragland, K. [Univ. of Wisconsin, Madison, WI (United States); Baker, A. [USDA Forest Products Lab., Madison, WI (United States)

1993-12-31

Manufactured wood products contain wood, wood fiber, and materials added during manufacture of the product. Manufacturing residues and the used products are burned in a furnace or boiler instead of landfilling. Emissions from combustion of these products contain additional compounds from the combustion of non-wood material which have not been adequately characterized to specify the best combustion conditions, emissions control equipment, and disposal procedures. Total hydrocarbons, formaldehyde, higher aldehydes and carbon monoxide emissions from aspen flakeboard and aspen cubes were measured in a 76 mm i.d. by 1.5 m long fixed bed combustor as a function of excess oxygen, and temperature. Emissions of hydrocarbons, aldehydes and CO from flakeboard and from clean aspen were very sensitive to average combustor temperature and excess oxygen. Hydrocarbon and aldehyde emissions below 10 ppM were achieved with 5% excess oxygen and 1,200{degrees}C average temperature for aspen flakeboard and 1,100{degrees}C for clean aspen at a 0.9 s residence time. When the average temperature decreased below these levels, the emissions increased rapidly. For example, at 950{degrees}C and 5% excess oxygen the formaldehyde emissions were over 1,000 ppM. These laboratory tests reinforce the need to carefully control the temperature and excess oxygen in full-scale wood combustors.

Evaluation of the environmental impacts of wood products for bio-energy through Life Cycle Assessment (LCA)

OpenAIRE

Pierobon, Francesca

2015-01-01

The use of wood for energy has grown in the last years as an alternative to fossil fuels. National and international laws promote the use of wood in the policies for the mitigation of climate change, based on the assumption that wood has a neutral carbon balance because the combustion emissions are offset by the absorption in forest (assumption of carbon neutrality). However, this assumption does not take into account the emissions associated with the life cycle of the product, e.g. related t...

LEVERAGING RURAL LIVELIHOODS WITH FOREST CONSERVATION IN NIGERIA: THE ROLE OF NON-TIMBER FOREST PRODUCTS

Directory of Open Access Journals (Sweden)

Egbe BASSEY ETOWA

2015-03-01

Full Text Available In recent times some economists view Non-Timber Forest Products (NTFPs extraction and marketing as a better alternative to timber exploitation as a rural livelihood strategy. Harvesting and sale of NTFPs have the potential for accomplishing the dual goals of natural forest conservation and income generation for the rural inhabitants. Meanwhile, realization of these dual goals in Nigeria, require an understanding of how NTFPs functions in the face of marketing, ecological, geographic and institutional constraints. Following a conceptualization of NTFPs, this paper provides a vivid overview of the simultaneous roles of NTFPs in rural livelihood enhancement and forest conservation in Nigeria. It highlights governmental initiatives with respect to conservation, the challenges and prospects of NTFPs as a conservation strategy. Conclusively, the paper suggests that appropriate NTFPs development policies are required to simultaneously address forest depletion and poverty in rural areas of Nigeria.

Production rates and costs of cable yarding wood residue from clearcut units

Science.gov (United States)

Chris B. LeDoux

1984-01-01

Wood residue is a little used source of fiber, chips, and fuel because harvest costs are largely unknown. This study calculates incremental production rates and costs for yarding and loading logging residue in clearcut old-growth Douglas-fir/western hemlock forests. Harvest operations were observed for two timber sales in western Oregon. Three different cable yarding...

Wood thermoplastic composites

Science.gov (United States)

Daniel F. Caulfield; Craig Clemons; Rodney E. Jacobson; Roger M. Rowell

2005-01-01

The term “wood-plastic composites” refers to any number of composites that contain wood (of any form) and either thermoset or thermoplastic polymers. Thermosets or thermoset polymers are plastics that, once cured, cannot be remelted by heating. These include cured resins, such as epoxies and phenolics, plastics with which the forest products industry is most familiar (...

Assesment of forest products market potential as a basis for forest sector development in the Jablanica District

Directory of Open Access Journals (Sweden)

Keča Ljiljana

2015-01-01

Full Text Available One of the main tasks of marketing research is the assessment of market potential. The aim of this research was to analyze the dynamics of selling and buying of wood and nonwood forest products (NWFPs within the analyzed enterprises in the Jablanica District. The purpose of this research was to examine the possibilities for the development of small and medium-sized enterprises (SMEs directed towards a sustainable use of forest products in the area of the Jablanica District. The subject of this research is: purchased and placed quantities in the analyzed enterprises, as well as the prices that were realized for the products, with special emphasis on commercially important mushrooms. The research was conducted in the territory of Jablanica and it included five enterprises engaged in the purchasing, processing and sale of NWFPs and the Forest Estate (FE “Forest” Leskovac. The purchase of raw forest fruits and herbs had a growing trend (+ 17.8% in the 2006-2013 period. The average annual growth rate (AAGR of sales was 3.4% for medicinal plants and 30.6% for mushrooms. The AAGR of NWFPs export was + 32.6%. The placement of beech wood assortments (K class recorded a purchase AAGR of app. + 12.7%. In 2013, it was found that the NWFPs with the highest market value were: blueberry, dried boletus and chanterelle. In 2013, their total gross revenue in the domestic market amounted to 82.3 million RSD, whereas the total gross revenue of the analyzed beech wood assortments was 87 million RSD. [Projekat Ministarstva nauke Republike Srbije, br. 37008: Održivo gazdovanje ukupnim potencijalima šuma u Republici Srbiji i br. TP 31041: Šumski zasadi u funkciji povećanja pošumljenosti Srbije

Machine Vision Technology for the Forest Products Industry

Science.gov (United States)

Richard W. Conners; D.Earl Kline; Philip A. Araman; Thomas T. Drayer

1997-01-01

From forest to finished product, wood is moved from one processing stage to the next, subject to the decisions of individuals along the way. While this process has worked for hundreds of years, the technology exists today to provide more complete information to the decision makers. Virginia Tech has developed this technology, creating a machine vision prototype for...

Mountain forest wood fuel supply chains: comparative studies between Norway and Italy

International Nuclear Information System (INIS)

Valente, Clara; Spinelli, Raffaele; Hillring, Bengt Gunnar; Solberg, Birger

2014-01-01

Case studies of mountain forest wood fuel supply chains from Norway and Italy are presented and compared. Results from previous studies in which greenhouse gas emissions and costs were evaluated using life cycle assessment and cost analysis respectively, are compared. The supply chain is more mechanized in Norway than Italy. Steeper terrain and low road density partly explain the persistence of motor-manual felling in the Italian case. Mechanized forest harvesting can increase productivity and reduce costs, but generates more greenhouse gas (GHG) emissions than motor-manual harvesting. In both cases, the main sources of GHG emissions are truck transportation and chipping. The total emissions are 22.9 kg CO 2 /m 3 s.o.b. (Norway) and 13.2 kg CO 2 /m 3 s.o.b. (Italy). The Norwegian case has higher costs than the Italian one, 64 €/m 3 s.o.b. and 41 €/m 3 s.o.b. respectively, for the overall supply chain. The study shows that mountain forests constitute an interesting source for fuel biomass in both areas, but are a rather costly source, particularly in Norway. The study also exemplifies the care needed in transferring LCA results between regions and countries, particularly where forest biomass is involved. - Highlights: • We compare two mountain forest wood fuel supply chains in Norway and in Italy. • Transportation by truck generate the highest emissions in both case studies. • The energy use of the Norwegian supply chain was approximately twice as high as the Italian one. • Changes in fuel consumption affect significantly emissions and energy use from transportation and chipping operations. • Cable yarding and transportation by truck were the most expensive phases respectively in the Italian and Norwegian supply chain

Leaching of wood ash - Laboratory and field studies; Lakning av vedaska - Laboratorie- och faeltstudier

Energy Technology Data Exchange (ETDEWEB)

Larsson, Per-Erik

2012-02-15

High forest production leads to diminishing amounts of base cations and micro nutrients in forest soils. This is due to uptake in, and harvest of, the trees. Losses can be compensated for by spreading stabilized wood ash on the forest ground, which means recycling of base cations and micro nutrients. Chemical composition of wood ash can easily be described by standard methods in the laboratory. However, this does not include the process of leaching in nature, such as which components and leaching rate for different compounds. During field conditions several factors are added, which are not available in the laboratory. After almost 10 years in the forest soils there still remains large quantities of the original product. Only 10-30 % of the wood ash products and 5 % of the lime product has been leached. In the laboratory study the leached amount was slightly larger, at the most 35 % for wood ash and 20 % for lime. Both studies indicate long time for weathering of the products in forest soils. Slower leaching rate from pellets of wood ash compared to leaching rate from crushed wood ash in the laboratory study is not verified by the field study. This indicates limited possibilities to control rates of leaching in the environment

Restoring Sustainable Forests on Appalachian Mined Lands for Wood Product, Renewable Energy, Carbon Sequestration, and Other Ecosystem Services

Energy Technology Data Exchange (ETDEWEB)

Burger, James A

2006-09-30

Concentrations of CO{sub 2} in the Earth’s atmosphere have increased dramatically in the past 100 years due to deforestation, land use change, and fossil fuel combustion. These humancaused, higher levels of CO{sub 2} may enhance the atmospheric greenhouse effect and may contribute to climate change. Many reclaimed coal-surface mine areas in the eastern U.S. are not in productive use. Reforestation of these lands could provide societal benefits, including sequestration of atmospheric carbon. The goal of this project was to determine the biological and economic feasibility of restoring high-quality forests on the tens of thousands of hectares of mined land and to measure carbon sequestration and wood production benefits that would be achieved from large-scale application of forest restoration procedures. We developed a mine soil quality model that can be used to estimate the suitability of selected mined sites for carbon sequestration projects. Across the mine soil quality gradient, we tested survival and growth performance of three species assemblages under three levels of silvicultural. Hardwood species survived well in WV and VA, and survived better than the other species used in OH, while white pine had the poorest survival of all species at all sites. Survival was particularly good for the site-specific hardwoods planted at each site. Weed control plus tillage may be the optimum treatment for hardwoods and white pine, as any increased growth resulting from fertilization may not offset the decreased survival that accompanied fertilization. Grassland to forest conversion costs may be a major contributor to the lack of reforestation of previously reclaimed mine lands in the Appalachian coal-mining region. Otherwise profitable forestry opportunities may be precluded by these conversion costs, which for many combinations of factors (site class, forest type, timber prices, regeneration intensity, and interest rate) result in negative land expectation values

Forest Resources

Energy Technology Data Exchange (ETDEWEB)

None

2016-06-01

Forest biomass is an abundant biomass feedstock that complements the conventional forest use of wood for paper and wood materials. It may be utilized for bioenergy production, such as heat and electricity, as well as for biofuels and a variety of bioproducts, such as industrial chemicals, textiles, and other renewable materials. The resources within the 2016 Billion-Ton Report include primary forest resources, which are taken directly from timberland-only forests, removed from the land, and taken to the roadside.

What incentives to climate change mitigation through harvested wood products in the current french policy framework? (Summary). Climate Report no. 47

International Nuclear Information System (INIS)

Deheza, Mariana; N'Goran, Carmen; Bellassen, Valentin

2014-09-01

Beyond the important role that forests play in the fight against climate change through the sequestration of carbon in their biomass, wood products also contribute to climate change through three channels: - Material substitution: the manufacturing of wood products being less energy intensive allows to avoid carbon emissions from the processing of other alternative materials (eg. concrete, steel, etc); - Energy substitution: achieved by the generation of energy from wood combustion replacing other fossil fuels. - Carbon sequestration in the wood products: wood products sequester carbon during their whole life span until their decomposition. This Climate Report identifies French policies that have an impact on climate change mitigation by wood products through these three mitigation channels. Our analysis asserts that similarly to the context at the EU level, the current national policy framework incentives are mostly directed to the 'energy wood' sector. These incentives include fiscal and financial instruments such as: - The heat fund ('fonds chaleur'), which subsidizes the production of renewable heat particularly from biomass; - The zero interest rate eco-loans ('eco-pret a taux zero') and the Sustainable development tax credit ('credit d'impot developpement durable (CIDD)') which partly subsidize wood heating; - Reduced VAT on renewable heat purchases. The use of wood as a material is currently less encouraged, at least on the financial side: the few devices that support it are rarely binding and mobilize limited resources. Future measures planned under the National Action Plan for the forest-based sector and the upcoming law for the future of agriculture and forestry ('Loi d'avenir pour l'agriculture et la foret') could slightly re-balance this situation. (authors)

Wood strength loss as a measure of decomposition in northern forest mineral soil

Science.gov (United States)

Martin Jurgensen; David Reed; Deborah Page-Dumroese; Peter Laks; Anne Collins; Glenn Mroz; Marek Degorski

2006-01-01

Wood stake weight loss has been used as an index of wood decomposition in mineral soil, but it may not give a reliable estimate in cold boreal forests where decomposition is very slow.Various wood stake strength tests have been used as surrogates of weight loss, but little is known on which test would give the best estimate of decomposition over a variety of soil...

Longevity of Wood-Forced Pools in an Old-Growth Forest

Science.gov (United States)

Buffington, J. M.; Woodsmith, R. D.; Johnson, A. C.

2009-12-01

Wood debris plays an important role in scouring pools in forest channels and providing resultant habitat for aquatic organisms. We investigated the longevity of such pools in a gravel-bed river flowing through old-growth forest in southeastern Alaska by aging trees and “bear’s bread” fungi (Ganoderma applanatum, Fomitopsis pinicola) growing on pool-forming wood debris. Ages were determined by counting annual growth rings from cores and cross sections of trees and fungi growing on the wood debris. These ages are minimum values because they do not account for lag time between debris recruitment and seedling/spore establishment on the debris, nor do they account for flood scour that may periodically reset tree and fungi growth on the debris. The study stream has a gradient of about 1%, bankfull width and depth of 13.3 and 0.78 m, respectively, median grain size of 18 mm, a high wood loading (0.8 pieces/m), and a correspondingly low pool spacing (0.3 bankfull widths/pool), with 81% of the pools forced by wood debris. The size of wood debris in the study stream is large relative to the channel (average log length of 7.6 m and diameter of 0.35 m), rendering most debris immobile. Eighty-one pool-forming pieces of wood were dated over 1.2 km of stream length, with 28% of these pieces causing scour of more than one pool. In all, 122 wood-forced pools were dated, accounting for 38% of all pools at the site and 47% of the wood-forced pools. Fifty-three percent of the wood-forced pools lacked datable wood because these pieces either: were newly recruited; had been scoured by floods; or were contained below the active channel elevation, prohibiting vegetation establishment on the wood debris (the most common cause). The debris age distribution declined exponentially from 2 to 113 yrs., with a median value of 18 yrs. Similar exponential residence time distributions have been reported in other studies, but our analysis focused specifically on the ages of pool-forming wood

RESTORING SUSTAINABLE FORESTS ON APPALACHIAN MINED LANDS FOR WOOD PRODUCTS, RENEWABLE ENERGY, CARBON SEQUESTRATION, AND OTHER ECOSYSTEM SERVICES

Energy Technology Data Exchange (ETDEWEB)

James A. Burger; J. Galbraith; T. Fox; G. Amacher; J. Sullivan; C. Zipper

2005-06-08

The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. We are currently estimating the acreage of lands in VA, WV, KY, OH, and PA mined under SMCRA and reclaimed to non-forested post-mining land uses that are not currently under active management, and therefore can be considered as available for carbon sequestration. To determine actual sequestration under different forest management scenarios, a field study was installed as a 3 x 3 factorial in a random complete block design with three replications at each of three locations, Ohio, West Virginia, and Virginia. The treatments included three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). Each individual treatment plot is 0.5 acres. Each block of nine plots is 4.5 acres, and the complete installation at each site is 13.5 acres. During the reporting period we compiled and evaluated all soil properties measured on the study sites. Statistical analysis of the properties was conducted, and first year survival and growth of white pine, hybrid poplars, and native hardwoods was assessed. Hardwood species survived better at all sites than white pine or hybrid poplar. Hardwood survival across treatments was 80%, 85%, and 50% for sites in Virginia, West Virginia, and Ohio, respectively, while white pine survival was 27%, 41%, and 58%, and hybrid poplar survival was 37%, 41%, and 72% for the same sites, respectively. Hybrid poplar height and diameter growth were superior to those of the other species tested, with the height growth of this species reaching 126.6cm after one year in the most intensive treatment at the site in Virginia. To determine carbon in soils on these

Beliefs about the Potential Impacts of Exploiting Non-Timber Forest Products Predict Voluntary Participation in Monitoring

Science.gov (United States)

Dantas Brites, Alice; Morsello, Carla

2017-06-01

Harvesting and trading non-timber forest products is advocated as a win-win strategy for conservation and development, yet it can produce negative ecological and socioeconomic impacts. Hence, monitoring exploitation outcomes is essential, and participatory monitoring has been suggested to be the most suitable approach. Among possible approaches, participatory monitoring is preferred because it is likely to increase people's awareness and beliefs regarding impacts or potential impacts, thus inducing behavioral changes, although the evidence in this regard is contradictory. We therefore evaluated whether people's beliefs about the potential ecological and socioeconomic impacts of non-timber forest product exploitation increased their likelihood of volunteering to monitor. We studied a community of forest inhabitants in the Brazilian Amazon who harvested and traded a commercially important non-timber forest product. Two methods of data gathering were employed: (i) a survey of 166 adults (51 households) to evaluate people's beliefs and their stated intention to engage in four different monitoring tasks and (ii) four pilot monitoring tasks to evaluate who actually participated. Based on mixed-effects regressions, the results indicated that beliefs regarding both types of impacts could predict participation in certain tasks, although gender, age and schooling were occasionally stronger predictors. On average, people had stronger beliefs about potential socioeconomic impacts than about potential ecological impacts, with the former also predicting participation in ecological data gathering. This finding reinforces the importance of monitoring both types of impacts to help achieve the win-win outcomes originally proposed by non-timber forest product trade initiatives.

Feedbacks between earlywood anatomy and non-structural carbohydrates affect spring phenology and wood production in ring-porous oaks

Science.gov (United States)

Pérez-de-Lis, Gonzalo; García-González, Ignacio; Rozas, Vicente; Olano, José Miguel

2016-10-01

Non-structural carbohydrates (NSC) play a central role in the construction and maintenance of a tree's vascular system, but feedbacks between the NSC status of trees and wood formation are not fully understood. We aimed to evaluate multiple dependencies among wood anatomy, winter NSC, and phenology for coexisting temperate (Quercus robur) and sub-Mediterranean (Q. pyrenaica) oaks along a water-availability gradient in the NW Iberian Peninsula. Sapwood NSC concentrations were quantified at three sites in December 2012 (N = 240). Leaf phenology and wood anatomy were surveyed in 2013. Structural equation modelling was used to analyse the interplay among hydraulic diameter (Dh), winter NSC, budburst date, and earlywood vessel production (EVP), while the effect of Dh and EVP on latewood width was assessed by using a mixed-effects model. NSC and wood production increased under drier conditions for both species. Q. robur showed a narrower Dh and lower soluble sugar (SS) concentration (3.88-5.08 % dry matter) than Q. pyrenaica (4.06-5.57 % dry matter), but Q. robur exhibited larger EVP and wider latewood (1403 µm) than Q. pyrenaica (667 µm). Stem diameter and Dh had a positive effect on SS concentrations, which were related to an earlier leaf flushing in both species. Sapwood sugar content appeared to limit EVP exclusively in Q. pyrenaica. In turn, Dh and EVP were found to be key predictors of latewood growth. Our results confirm that sapwood SS concentrations are involved in modulating growth resumption and xylem production in spring. Q. pyrenaica exhibited a tighter control of carbohydrate allocation to wood formation than Q. robur, which would play a role in protecting against environmental stress in the sub-Mediterranean area.

Designing Wood Supply Scenarios from Forest Inventories with Stratified Predictions

Directory of Open Access Journals (Sweden)

Philipp Kilham

2018-02-01

Full Text Available Forest growth and wood supply projections are increasingly used to estimate the future availability of woody biomass and the correlated effects on forests and climate. This research parameterizes an inventory-based business-as-usual wood supply scenario, with a focus on southwest Germany and the period 2002–2012 with a stratified prediction. First, the Classification and Regression Trees algorithm groups the inventory plots into strata with corresponding harvest probabilities. Second, Random Forest algorithms generate individual harvest probabilities for the plots of each stratum. Third, the plots with the highest individual probabilities are selected as harvested until the harvest probability of the stratum is fulfilled. Fourth, the harvested volume of these plots is predicted with a linear regression model trained on harvested plots only. To illustrate the pros and cons of this method, it is compared to a direct harvested volume prediction with linear regression, and a combination of logistic regression and linear regression. Direct harvested volume regression predicts comparable volume figures, but generates these volumes in a way that differs from business-as-usual. The logistic model achieves higher overall classification accuracies, but results in underestimations or overestimations of harvest shares for several subsets of the data. The stratified prediction method balances this shortcoming, and can be of general use for forest growth and timber supply projections from large-scale forest inventories.

Insight into tradeoff between wood decay and parasitism from the genome of a fungal forest pathogen

Science.gov (United States)

Ake Olson; Andrea Aerts; Fred Asiegbu; Lassaad Belbahri; Ourdia Bouzid; Anders Broberg; Bjorn Canback; Pedro M. Coutinho; Dan Cullen; Kerstin Dalman; Giuliana Deflorio; Linda T.A. van Diepen; Christophe Dunand; Sebastien Duplessis; Mikael Durling; Paolo Gonthier; Jane Grimwood; Carl Gunnar Fossdal; David Hansson; Bernard Henrissat; Ari Hietala; Kajsa Himmelsrand; Dirk Hoffmeister; Nils Hogberg; Timothy Y. James; Magnus Karlsson; Annegret Kohler; Ursula Kues; Yong-Hwan Lee; Yao-Cheng Lin; Marten Lind; Erika Lindquist; Vincent Lombard; Susan Lucas; Karl Lunden; Emmanuelle Morin; Claude Murat; Jongsun Park; Tommaso Raffaello; Pierre Rouze; Asaf Salamov; Jeremy Schmutz; Halvor Solheim; Jerry Stahlberg; Heriberto Velez; Ronald P. deVries; Ad Wiebenga; Steve Woodward; Igor Yakovlev; Matteo Garbelotto; Francis Martin; Igor V. Grigoriev; Jan. Stenlid

2012-01-01

• Parasitism and saprotrophic wood decay are two fungal strategies fundamental for succession and nutrient cycling in forest ecosystems. An opportunity to assess the trade-off between these strategies is provided by the forest pathogen and wood decayer Heterobasidion annosum sensu lato. • We report the annotated genome sequence and transcript...

Environmental education on wood preservatives and preservative ...

African Journals Online (AJOL)

The development and use of wood preservatives in Nigeria should address not only the cost and demand functions but also the potential hazards in environmental equations. Forest products specialists are often asked about the perceived risks and environmental costs of treated wood products. Evidently, the civil society is ...

Nanotechnology for the Forest Products Industry Vision and Technology Roadmap

Energy Technology Data Exchange (ETDEWEB)

Atalla, Rajai [USDA Forest Service, Washington, DC (United States); Beecher, James [USDA Forest Service, Washington, DC (United States); Caron, Robert [Technical Association of the Pulp and Paper Industry, Peachtree Corners, GA (United States); Catchmark, Jeffrey [Pennsylvania State Univ., State College, PA (United States); Deng, Yulin [Georgia Inst. of Technology, Atlanta, GA (United States); Glasser, Wolfgang [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States); Gray, Derek [McGill Univ., Montreal, QC (Canada); Haigler, Candace [North Carolina State Univ., Raleigh, NC (United States); Jones, Philip [Imerys, Paris (France); Joyce, Margaret [Western Michigan Univ., Kalamazoo MI (United States); Kohlman, Jane [USDA Forest Service, Washington, DC (United States); Koukoulas, Alexander [Technical Association of the Pulp and Paper Industry, Peachtree Corners, GA (United States); Lancaster, Peter [Weyerhaeuser Company, Longview, WA (United States); Perine, Lori [American Forest and Paper Association, Washington, DC (United States); Rodriguez, Augusto [Georgia-Pacific Corporation, Atlanta, GA (United States); Ragauskas, Arthur [Georgia Inst. of Technology, Atlanta, GA (United States); Wegner, Theodore [USDA Forest Service, Washington, DC (United States); Zhu, Junyong [USDA Forest Service, Washington, DC (United States)

2005-03-01

A roadmap for Nanotechnology in the Forest Products Industries has been developed under the umbrella of the Agenda 2020 program overseen by the CTO committee. It is expected that the use of new analytical techniques and methodologies will allow us to understand the complex nature of wood based materials and allow the dramatically enhanced use of the major strategic asset the US has in renewable, recyclable resources based on its well managed Forests.

California's hardwood resource: managing for wildlife, water, pleasing scenery, and wood products

Science.gov (United States)

Philip M. McDonald; Dean W. Huber

1995-01-01

A new management perspective that emphasizes a variety of amenities and commodities is needed for California’s forest-zone hardwoods. For the near future and perhaps more on public than on private land, these "yields" are wildlife, water, esthetics, and wood products. Each is presented first as an individual yield and then as part of a combined yield. As an...

Mill demonstration of TMP production from forest thinnings: pulp quality, refining energy, and handsheet properties

Science.gov (United States)

J.Y. Zhu; C. Tim Scott; Roland Gleisner; Doreen Mann; D.P. Dykstra; G. Holton Quinn; Louis L. Edwards

2007-01-01

High-value, large-volume utilization of forest thinning materials from U.S. national forests is a potentially important contributor to sustainable forest health. This study demonstrated the utilization of wood chips produced from thinnings for the production of thermomechanical pulp (TMP). Both whole-log chips (primarily from small-diameter logs, tops, and reject logs...

Regular Recycling of Wood Ash to Prevent Waste Production (RecAsh). Technical Final Report

Energy Technology Data Exchange (ETDEWEB)

Andersson, Lars E-mail: lars.t.andersson@skogsstyreslen.se

2007-03-15

At present, the extraction of harvest residues is predicted to increase in Sweden and Finland. As an effect of the intensified harvesting, the export of nutrients and acid buffering substances from the growth site is also increased. Wood ash could be used to compensate forest soils for such losses. Most wood fuel ash is today often deposited in landfills. If the wood ash is recycled, wood energy is produced without any significant waste production. Ash recycling would therefore contribute to decreasing the production of waste, and to maintaining the chemical quality of forest waters and biological productivity of forest soils in the long term. The project has developed, analysed and demonstrated two regular ash-recycling systems. It has also distributed knowledge gathered about motives for ash recycling as well as technical and administrative solutions through a range of media (handbooks, workshops, field demonstrations, reports, web page and information videos). Hopefully, the project will contribute to decreasing waste problems related to bio-energy production in the EU at large. The project has been organised as a separate structure at the beneficiary and divided in four geographically defined subprojects, one in Finland and three in Sweden (Central Sweden, Northern Sweden, and South-western Sweden). The work in each subproject has been lead by a subproject leader. Each subproject has organised a regional reference group. A project steering committee has been established consisting of senior officials from all concerned partners. The project had nine main tasks with the following main expected deliverables and output: 1. Development of two complete full-scale ash-recycling systems; 2. Production of handbooks of the ash recycling system; 3. Ash classification study to support national actions for recommendations; 4. Organise regional demonstrations of various technical options for ash treatment and spreading; 5. Organise national seminars and demonstrations of

Studies of wood fuel systems with raw material from young forest stands. Final report; Systemstudier ungskogsbraensle. Slutrapport

Energy Technology Data Exchange (ETDEWEB)

Liss, J.E. [Dalarna Univ., Falun (Sweden)

2001-12-01

The three-year project 'Studies of wood fuel systems with raw material from young forest stands' has been carried out during the period March 1998 to February 2001. New technology for harvesting small trees has created a possibility to develop efficient wood fuel systems using raw material from young forest stands. This possibility coincides with a great demand for tending of young stands from a silvicultural point of view. The main aim of the project has been to analyse and assess wood fuel systems based on this concept. The spectrum of criteria for assessment has been broad, including productivity, profitability, safety and health aspects, employment and environmental impact. As an example of a new technology which has been developed and studied during the project period can be mentioned a new felling head which can be used for cutting and handling several trees at the same time. The weight of the felling head is only about 270 kg, which has done it possible to use it on smaller base-machines as well as larger machines. The productivity has shown to be about 150-250 trees/hour in stands with a diameter of 5-10 cm. The productivity, expressed as biomass, is about 2-3 tonnes dry substance/hour. In the design of production system, bundling of trees early in the process is considered to be especially promising. The development of such a system is ongoing, but is not at the market yet. Some experimental studies have been done on transportation, storing and chipping of such bundles with varying size and varying tree-species. The calculated cost of this system will be lower then for traditional chipping-systems, because of the higher density for the handle units. It is much easier to handle bundles than small non-bundled trees, the chipping-productivity will be high and the transportation can be done with regular timber trucks. The calculation cost for the bundle-system will be about 120-130 SEK/MWh in stands with a diameter of some 7-10 cm, which can be

Economy of wood supply

International Nuclear Information System (INIS)

Imponen, V.

1993-01-01

Research and development of wood fuels production was vigorous in the beginning of the 1980's. Techniques and working methods used in combined harvesting and transportation of energy and merchantable wood were developed in addition to separate energy wood delivery. After a ten year silent period the research on this field was started again. At present the underutilization of forest supplies and the environmental effects of energy production based on fossil fuels caused the rebeginning of the research. One alternative for reduction of the price of wood fuels at the utilization site is the integration of energy and merchantable wood deliveries together. Hence the harvesting and transportation devices can be operated effectively, and the organizational costs are decreased as well. The wood delivery costs consist of the stumpage price, the harvesting and transportation costs, and of general expenses. The stumpage price form the largest cost category (over 50 %) of the industrial merchantable wood delivery, and the harvesting and transportation costs in the case of thinningwood delivery. Forest transportation is the largest part of the delivery costs of logging residues. The general expenses, consisting of the management costs and the interest costs of the capital bound to the storages, form a remarkable cost category in delivery of low-rank wood for energy or conversion purposes. The costs caused by the harvesting of thinningwood, the logging residues, chipping and crushing, the lorry transportation are reviewed in this presentation

Assessment of the radiation field from radioactive elements in a wood-ash-treated coniferous forest in southwest Sweden

International Nuclear Information System (INIS)

Ravila, A.; Holm, E.

1996-01-01

The distribution of natural and antrophogenic radioactive elements in soil and wood was investigated in a 30-year-old forest stand of Norway spruce. Forest plots treated with a single dose of granulated wood ash in 1989 were compared with untreated control plots. It was observed that the retention of radiocesium and radiostrontium by the forest soil is rather strong in spite of the high annual precipitation (1100 mm a -1 ) and the relatively acidic conditions of the soil. Most of the deposited nuclear weapon fall-out of radiocesium and radiostrontium is still residing in the forest soil. Radiostrontium, but not radiocesium, was found in the intrasoil water collected with lysimeters at soil depths of 20 and 50 cm. Wood xylem radial distributions of radiostrontium indicated a decreased bioavailability with time after deposition of nuclear weapons fall-out, and no major differences could be observed on comparison of wood from ash-treated plots with wood from untreated plots. The activity concentration of radiocesium in tree rings formed prior to 1986 and grown at the ash-treated plot was about two to three times that found in wood from the untreated control plot. (author)

Connecting non-timber forest products stakeholders to information and knowledge: A case study of an Internet web site

Science.gov (United States)

James Chamberlain; Matt Winn; A.L. Hammett

2009-01-01

Many products are harvested from forests that are not timber-based but are based on plant materials. These non-timber forest products (NTFPs) have not been fully incorporated into economic development programs, yet they provide significant monetary benefits for rural entrepreneurs. Interest in NTFPs as alternative forest enterprises and sources of additional income has...

European wood-fuel trade

International Nuclear Information System (INIS)

Hillring, B.; Vinterbaeck, J.

2001-01-01

This paper discusses research carried out during the l990s on European wood fuel trade at the Department of Forest Management and Products, SLU, in Sweden. Utilisation of wood-fuels and other biofuels increased very rapidly in some regions during that period. Biofuels are replacing fossil fuels which is an effective way to reduce the future influence of green house gases on the climate. The results indicate a rapid increase in wood-fuel trade in Europe from low levels and with a limited number of countries involved. The chief products traded are wood pellets, wood chips and recycled wood. The main trading countries are, for export, Germany and the Baltic states and, for import, Sweden, Denmark and to some extent the Netherlands. In the future, the increased use of biofuel in European countries is expected to intensify activity in this trade. (orig.)

Selected non-timber forest products with medicinal applications from Jilin Province in China

Science.gov (United States)

Yao Ge Huang; Branka Barl; Gerald. Ivanochko

2001-01-01

This paper provides a brief account of the distribution, production, and use of some non-timber forest products such as medicinal plants, medicinal and nutraceutical mushrooms, pharmaceutical insects, and "wild" vegetables in Jilin Province, China. All materials featured in this paper are used in Traditional Chinese Medicine (TCM) inside and outside of China...

Price of forest chips decreasing

International Nuclear Information System (INIS)

Hakkila, P.

2001-01-01

Use of forest chips was studied in 1999 in the national Puuenergia (Wood Energy) research program. Wood combusting heating plants were questioned about are the main reasons restricting the increment of the use of forest chips. Heating plants, which did not use forest chips at all or which used less than 250 m 3 (625 bulk- m 3 ) in 1999 were excluded. The main restrictions for additional use of forest chips were: too high price of forest chips; lack of suppliers and/or uncertainty of deliveries; technical problems of reception and processing of forest chips; insufficiency of boiler output especially in winter; and unsatisfactory quality of chips. The price of forest chips becomes relatively high because wood biomass used for production of forest chips has to be collected from wide area. Heavy equipment has to be used even though small fragments of wood are processed, which increases the price of chips. It is essential for forest chips that the costs can be pressed down because competition with fossil fuels, peat and industrial wood residues is hard. Low market price leads to the situation in which forest owner gets no price of the raw material, the entrepreneurs operate at the limit of profitability and renovation of machinery is difficult, and forest chips suppliers have to sell the chips at prime costs. Price of forest chips has decreased significantly during the past decade. Nominal price of forest chips is now lower than two decades ago. The real price of chips has decreased even more than the nominal price, 35% during the past decade and 20% during the last five years. Chips, made of small diameter wood, are expensive because the price includes the felling costs and harvesting is carried out at thinning lots. Price is especially high if chips are made of delimbed small diameter wood due to increased the work and reduced amount of chips. The price of logging residue chips is most profitable because cutting does not cause additional costs. Recovery of chips is

Cellulose factories: advancing bioenergy production from forest trees.

Science.gov (United States)

Mizrachi, Eshchar; Mansfield, Shawn D; Myburg, Alexander A

2012-04-01

Fast-growing, short-rotation forest trees, such as Populus and Eucalyptus, produce large amounts of cellulose-rich biomass that could be utilized for bioenergy and biopolymer production. Major obstacles need to be overcome before the deployment of these genera as energy crops, including the effective removal of lignin and the subsequent liberation of carbohydrate constituents from wood cell walls. However, significant opportunities exist to both select for and engineer the structure and interaction of cell wall biopolymers, which could afford a means to improve processing and product development. The molecular underpinnings and regulation of cell wall carbohydrate biosynthesis are rapidly being elucidated, and are providing tools to strategically develop and guide the targeted modification required to adapt forest trees for the emerging bioeconomy. Much insight has already been gained from the perturbation of individual genes and pathways, but it is not known to what extent the natural variation in the sequence and expression of these same genes underlies the inherent variation in wood properties of field-grown trees. The integration of data from next-generation genomic technologies applied in natural and experimental populations will enable a systems genetics approach to study cell wall carbohydrate production in trees, and should advance the development of future woody bioenergy and biopolymer crops.

Assessing radiation doses to the public from radionuclides in timber and wood products

International Nuclear Information System (INIS)

2003-10-01

In the event of a nuclear accident involving the release of radionuclides to the biosphere the radioactive contamination of forests can become a significant potential source of public radiation exposure. Two of these accidents - the Kyshtim accident, Urals, USSR (now Russian Federation) in 1957 and the Chernobyl accident, USSR (now Ukraine), in 1986 - resulted in significant contamination of thousands of square kilometres of forested areas with mixtures of radionuclides including long lived fission products such as 137 Cs and 90 Sr. Measurements and modelling of forest ecosystems after both accidents have shown that, following initial contamination, the activity concentration of long lived radionuclides in wood gradually increases over one to two decades and then slowly decreases in the subsequent period. The longevity of the contamination is due to the slow migration and persistent bioavailability of radionuclides in the forest soil profile, which results in long term transfer into wood through the root system of the trees. Another source of contamination is from global radioactive fallout after nuclear weapons tests, but the level of contamination is much lower than that from, for example, the Chernobyl accident. For instance, the level of 137 Cs in wood in Sweden is about 2-5 Bq kg -1 from global fallout. Global values are very similar to the Swedish levels. In contrast, the level of 137 Cs in Swedish wood due to Chernobyl is around 50 Bq kg -1 . Levels in wood from some contaminated areas located in countries of the Former Soviet Union (FSU) are about one to two orders of magnitude higher than this. The data on 137 Cs soil contamination within European territories, originating mainly from the Chernobyl accident, illustrate the scale of the problem. For comparison, residual 137 Cs soil deposition in Europe from global radioactive fallout was in the range 1-4 kBq m -2 . There is concern in several countries about the potential radiation exposure of people from

Wood Volume Production and Use of 10 Woody Species in Semiarid Zones of Northeastern Mexico

Directory of Open Access Journals (Sweden)

Rahim Foroughbakhch

2012-01-01

Full Text Available A research strategy was established to analyze the structure of timber trees in terms of forest productivity (volume and wood density of 10 species. The native species Acacia farnesiana, Acacia schaffneri, Bumelia celastrina, Cercidium macrun, Condalia hookeri, Ebenopsis ebano, Helietta parvifolia, and Prosopis laevigata and the exotic species Eucalyptus camaldulensis and Leucaena leucocephala were chosen due to their ecological and economic importance to the rural villages of northeastern Mexico. Measurements of different growth parameters and volume of trees were evaluated. The introduced species E. camaldulensis and L. leucocephala showed the best performance in wood volume production per tree and per hectare when compared to the native species. Likewise, among the native species, E. ebano, P. laevigata, C. hookeri, and A. farnesiana tended to show better characteristics in terms of wood volume production in comparison to H. parvifolia, A. schaffneri, C. macrum, and B. celastrina. Results showed a high diversity on the properties studied. The high biomass produced by most of the species considered in this study revealed their great energetic potential when used as wood and firewood or vegetal charcoal.

The wood industry in Atlantic Canada: A focus on value-added

International Nuclear Information System (INIS)

1998-11-01

This report prepared by the Atlantic Canada Opportunities Agency in consultation with the four Atlantic provinces focuses on the value-added aspects of the wood products industry in Atlantic Canada. It also examines the state of the resource, the state of the industry, productivity and economic benefits, products and markets, trade and regulations, and needs, challenges and targets. The analysis was undertaken to determine the possibility of further utilization of forest resources in the region for value-added products, and to assess the possibilities for the wood products industry of Atlantic Canada exploring world markets for its products. The inventory of resources found 1.4 billion cubic meter of wood-growing productive forest land in the region, with softwoods accounting for 76 per cent of the forests. Concern was expressed about forest stands at regeneration levels. Total Annual Allowable Cut (AAC) for the Atlantic Provinces in 1995 was almost 20 million cubic meter, approximately 10 per cent of the national total. Although total harvests are below the AAC for the region, softwood harvesting in 1994 and in 1995 was well above the AAC. The analysis concluded that given the current level of harvesting, sustained growth in Atlantic Canada's wood industries will have to rely on access to external fibre sources and better use of the existing fibre source. At the same time, since many value-added manufacturers in the region rely on imported wood resources, the health of the value-added wood industry does not appear to be completely dependent on the sustainability of forest resources in the Atlantic region. Part Two of the report provides an economic profile of the industry, including brief reviews on employment, wages and salaries, exports and imports, transportation, education and training, research and technology and marketing. refs., tabs

Wood Decomposition of Cyrilla racemiflora (Cyrillaceae) in Puerto Rican Dry and Wet Forests: A 13-year Case Study.

Science.gov (United States)

Juan A. Torres; Grizelle Gonzalez

2005-01-01

We studied the decomposition of Cyrilla racemiflora logs over a 13-yr period in tropical dry and wet forests in Puerto Rico. The mean mass loss, ratio of soft to hard wood, nutrient concentrations, and the diversity of wood-inhabiting organisms were greater in logs decomposing in the dry forest than in the wet forest. Termites were also more abundant in the logs...

Changes in mass and nutrient content of wood during decomposition in a south Florida mangrove forest

Science.gov (United States)

Romero, L.M.; Smith, T. J.; Fourqurean, J.W.

2005-01-01

1 Large pools of dead wood in mangrove forests following disturbances such as hurricanes may influence nutrient fluxes. We hypothesized that decomposition of wood of mangroves from Florida, USA (Avicennia germinans, Laguncularia racemosa and Rhizophora mangle), and the consequent nutrient dynamics, would depend on species, location in the forest relative to freshwater and marine influences and whether the wood was standing, lying on the sediment surface or buried. 2 Wood disks (8-10 cm diameter, 1 cm thick) from each species were set to decompose at sites along the Shark River, either buried in the sediment, on the soil surface or in the air (above both the soil surface and high tide elevation). 3 A simple exponential model described the decay of wood in the air, and neither species nor site had any effect on the decay coefficient during the first 13 months of decomposition. 4 Over 28 months of decomposition, buried and surface disks decomposed following a two-component model, with labile and refractory components. Avicennia germinans had the largest labile component (18 ?? 2% of dry weight), while Laguncularia racemosa had the lowest (10 ?? 2%). Labile components decayed at rates of 0.37-23.71% month -1, while refractory components decayed at rates of 0.001-0.033% month-1. Disks decomposing on the soil surface had higher decay rates than buried disks, but both were higher than disks in the air. All species had similar decay rates of the labile and refractory components, but A. germinans exhibited faster overall decay because of a higher proportion of labile components. 5 Nitrogen content generally increased in buried and surface disks, but there was little change in N content of disks in the air over the 2-year study. Between 17% and 68% of total phosphorus in wood leached out during the first 2 months of decomposition, with buried disks having the greater losses, P remaining constant or increasing slightly thereafter. 6 Newly deposited wood from living trees was

Proceedings of the 8. biennial residual wood conference

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

This conference highlighted practical strategies for managing and utilizing residual wood as a true industry resource. Examples of successful wood energy projects were presented along with the technology and products of more than 30 companies involved in the residual wood business. The topics of discussion ranged from biomass supplies, quality issues, and harvesting guidelines to emerging biomass technologies, project overviews, and financing. The presentations outlined the many opportunities that exist for the forest industry to produce energy from biostock, such as healthy and diseased trees, underbrush, sawdust, wood chips, wood pulp and black liquor. Increasing fuel and energy costs along with advances in technology are improving the economy of forest-based biorefineries. The presentations showed how the industry can gain revenue from residual wood, which is steadily becoming a more valuable resource for pellet production and energy generation The conference featured 20 presentations, of which 3 have been catalogued separately for inclusion in this database. refs., tabs., figs.

Mineralogy of Non-Silicified Fossil Wood

Directory of Open Access Journals (Sweden)

George E. Mustoe

2018-03-01

Full Text Available The best-known and most-studied petrified wood specimens are those that are mineralized with polymorphs of silica: opal-A, opal-C, chalcedony, and quartz. Less familiar are fossil woods preserved with non-silica minerals. This report reviews discoveries of woods mineralized with calcium carbonate, calcium phosphate, various iron and copper minerals, manganese oxide, fluorite, barite, natrolite, and smectite clay. Regardless of composition, the processes of mineralization involve the same factors: availability of dissolved elements, pH, Eh, and burial temperature. Permeability of the wood and anatomical features also plays important roles in determining mineralization. When precipitation occurs in several episodes, fossil wood may have complex mineralogy.

Challenges and Opportunities in the Use of Marketing Tools and the Promotion of Non Wood Forest Products-Based Small and Medium Enterprises in the South East Europe

Directory of Open Access Journals (Sweden)

Makedonka Stojanovska

2015-06-01

Full Text Available Background and Purpose: The South-east Europe (SEE region is facing a new market economy era where establishing new businesses is more than needed in all sectors. The forest sector, faced with new market emerging opportunities, is affected by the constant increase of a number of forest related enterprises. This paper describes the challenges and opportunities related to the use of marketing tools for improving business of the small and medium enterprises (SMEs dealing with non-wood forest products (NWFPs in SEE region. The research on this subject in the SEE region is scarce despite the rich biodiversity as a solid base for establishing eco-businesses. Materials and Methods: The method used in this paper is quantitative, based on survey data collected from enterprises in the NWFPs sector followed by statistical data analyses using Statistical Package for Social Sciences (SPSS. The survey was conducted during 2011 and 2012 in four SEE countries: Croatia, Bosnia and Herzegovina, Serbia and Macedonia. Results: The results showed that developed channels of distribution, branding and advertising of NWFPs are recognized in all countries as important and very important, but these marketing tools are used only few times per year. The majority of respondents pointed out advertising as the most frequently used and as the most successful tool. Interviewees’ future investments are to be focused on improving equipment for drying, packing, refrigerating and transport. Several entrepreneurs from Macedonia pointed out that they would invest in increasing the number of buying points and herb plantations while almost all Croatian entrepreneurs will invest in advertising, branding and promotion. Majority of respondents from Serbia are also of the opinion that financial resources should be invested in new equipment. The reasons for these investments can be summarized in reducing costs and increasing profit or in faster turnover. Conclusions: The use of marketing

Insect-mediated nitrogen dynamics in decomposing wood

Science.gov (United States)

Michael D. Ulyshen

2015-01-01

1.Wood decomposition is characterised by complex and poorly understood nitrogen (N) dynamics with unclear implications for forest nutrient cycling and productivity.Wood-dwelling microbes have developed unique strategies for coping with the N limitations imposed by their substrate, including the translocation of N into wood by cord-forming fungi and the fixation of...

Knock on wood: Is wood production sustainable in the Pacific Northwest?

Science.gov (United States)

Jonathan Thompson

2006-01-01

The Pacific Northwest is one of the world’s major timber-producing regions, and its capacity to produce wood on a sustained-yield basis is widely recognized. Nonetheless, there has been increasing public interest in assuring that forests are being sustainably managed, as well as a desire by landowners to demonstrate their commitment to responsible stewardship.

Finding effective ways to provide knowledge to forest managers about non-timber forest products: a case-study of distance learning approaches

Science.gov (United States)

A. L. (Tom) Hammett; Jim Chamberlain; Matt Winn

2009-01-01

Many who grow or collect non-timber forest products (NTFPs) have been under-served in traditional forestry educational programs. It has often been difficult to determine the needs of this disparate group of stakeholders as collectors and growers are widely dispersed across the landscape, and not recognized as important stakeholders in formal cost forest...

Environmental life cycle assessment of wood-based building materials and building product. Oekobilanzen von Baustoffen und Bauprodukten aus Holz; Zusammenfassung erster Erkenntnisse

Energy Technology Data Exchange (ETDEWEB)

Richter, K; Sell, J [Eidgenoessische Materialpruefungs- und Versuchsanstalt fuer Industrie, Bauwesen und Gewerbe, Duebendorf (Switzerland)

1992-08-01

This report presents a summary of the main studies on the topic carried out at EMPA wood department in the last 4 years.In its first part, the concept of an environmental life cycle analysis (LCA), whose purpose is to quantify the known environmental impacts of a product by means of a systematic input/output analysis, is described. Such evaluation must include all phases of a product's life cycle, from the extraction of resources to the final disposal. Raw material and energy supply are input values, whereas main products, by-products, and emissions to the environment are outputs. It is essential for a meaningful data collection as well as for the final interpretation of the results to define exact system boundaries and explain the models used for data aggregation which are, therefore, described in detail. The report's second part summarizes the results of an environmental assessment of wood as a raw material and construction component, and of some important wood-based products. First, some product-independent ecological values of wood are shown, which today cannot be quantified sufficiently in LCA (e.g. relations between forest management and multi-functional values of forests, sustainable reproduction of wood, careful and benign harvesting practices, CO[sub 2] cycling with wood, and the complete utilization of the resource for industrial productions). Although all these basic characteristics contribute to the out-standing ecologic value of wood, an environmental analysis has to concentrate on material- and product-related aspects. In our study, this is realized by assessing energy consumption and air pollution. In a case study the data compiled are used to compare a timber frame wall with several wall types of different materials, but with identical heat transmission and acoustic performance: as expected, the timber frame wall shows very good ratings. (author) figs., tabs., 21 refs.

Cone calorimeter tests of wood-based decking materials

Science.gov (United States)

Robert H. White; Mark A. Dietenberger; Nicole M. Stark

2007-01-01

New technologies in building materials have resulted in the use of a wide variety of materials in decks. As part of our effort to address fire concerns in the wildland-urban interface, the Forest Products Laboratory has been examining the fire performance of decking products. In addition to preservative-treated wood, decking products include wood-plastic composites and...

Who's Counting Dead Wood ?

OpenAIRE

Woodall, C. W.; Verkerk, H.; Rondeux, Jacques; Ståhl, G.

2009-01-01

Dead wood in forests is a critical component of biodiversity, carbon and nutrient cycles, stand structure, and fuel loadings. Until recently, very few countries have conducted systematic inventories of dead wood resources across their forest lands. This may be changing as an increasing number of countries implement dead wood inventories. A recent survey looks at the status and attributes of forest dead wood inventories in over 60 countries. About 13 percent of countries inventory dead wood gl...

Western Canadian wood residue production and consumption trends

International Nuclear Information System (INIS)

McCloy, B.

2006-01-01

This presentation considered various trends in western Canadian wood residue production and consumption. Potential markets for wood residue products were also discussed. Trends were reviewed by province for the years 2000-2004. British Columbia (BC) is currently the largest producer of residue in the country, and also retains the largest surpluses of bark, sawdust and shavings. Wood residues in BC are used in pulp and plywood mill production, as well as in the creation of particleboard and MDF. Surplus mill wood residue production in the province has greatly increased due to the Mountain Pine Beetle (MPB) infestation, which has in turn spurred expansion of the BC interior sawmill industry. The infestation has also resulted in a glut of pulp chips. Current wood residue products in Alberta are mostly used in pulp mill combined heat and power (CHP) systems, as well as for wood pellet production and the creation of particleboard and MDF. It was noted that surplus residues are rapidly declining in the province. Saskatchewan's wood residue storage piles are estimated to contain 2,900,000 BDt, while Manitoba surpluses are relatively minor. It was suggested that high natural gas prices have increased the payback on wood energy systems to approximately 2 years. The value of wood residue is now greater than $100/BDt as a substitute for natural gas once the wood energy system has been fully depreciated. Sawmills may now wish to consider equipping themselves to sell wood residue products, as most sawmills only require 20 per cent of their residues for heating purposes. It was concluded that markets for hog fuel wood pellets should be developed in Canada and internationally. Future markets may also develop if natural gas currently used in pulp mill power boilers and lime kilns is replaced with wood residue energy systems. refs., tabs., figs

Logging potentials and energy wood resources in southern Finland; Potentiaaliset hakkuumahdollisuudet ja energiapuuvarat Etelae- Suomessa

Energy Technology Data Exchange (ETDEWEB)

Pesonen, M; Malinen, J [Finnish Forest Research Inst. METLA, Vantaa (Finland)

1997-12-01

Development of energy wood resources in Southern Finland over the next 40 years was studied on the basis of four cutting scenarios. Development of energy wood accrual was considered on the production cost levels of FIM 45/MWh and FIM 55/MWh in scenarios describing sustainable cutting potential, long-term cutting plans of forest owners and cutting of industrial mechandable wood over the years of depression. Effects of limitations concerning energy wood harvesting from meagre forest land and bogs on the energy wood accruals of sustainable cutting potential were also studied. The energy wood potential in Southern Finland was estimated at 3.6 million m{sup 3}/a on the production cost level of FIM 45/MWh. The energy wood accrual equal to sustainable cutting potential was 70 % of the energy wood potential. The energy wood potential increased to 8.8 m{sup 3}/a when the production cost level increased to FIM 55/MWh, the energy wood accrual of sustainable cutting potential being 51 %. The energy wood accruals according to felling plans of forest owners and cuttings over the years of depression were smaller than that of sustainable cutting potential, due to smaller loggings. Limitation of energy wood harvesting from meagre forest land and bogs would reduce the energy wood accrual of sustainable cutting potential by 22 %. This would involve a reduction of one million m{sup 3} in the harvesting potential. The energy wood accrual of sustainable cutting potential in Finland was 5.8 million m{sup 3}/a on the production cost level of FIM 55/MWh. This is equal to the aim set by the BIOENERGY Research Programme for the use potential of 1 Mtoe (equivalent oil tonne) on the production cost level of FIM 45/MWh

Energy wood resources availability and delivery cost in Northwest Russia

Energy Technology Data Exchange (ETDEWEB)

Gerasimov, Yuri; Karjalainen, Timo [Finnish Forest Research Inst., Joensuu (Finland)], E-mail: yuri.gerasimov@metla.fi

2013-10-01

Availability of solid by-products from wood harvesting and mechanical wood processing was estimated as sources for energy production based on recent actual harvesting, sawmill, and plywood production in Northwest Russia at 30 million m{sup 3}. Nearly 70% of the energy wood, 20 million m{sup 3}, was from harvesting, consisting of non-industrial round wood, unused branches and tops, defective wood resulting from logging, and spruce stumps removed after final felling. Over 30%, 10 million m{sup 3}, of the available volume was from sawmills and plywood mills, i.e. wood chips, sawdust, and bark. Due to current low utilization of energy wood for bioenergy in Northwest Russia, delivery cost of energy wood to the potential border-crossing points in Finland was analyzed for three means of transport: railways, roadways, and waterways. Nearly 28 million m{sup 3} of the energy wood could be transported by railways and 2 million m{sup 3} by roadways and waterways. The costs were lowest by roadways from the nearby border areas (10-15 Euro/m{sup 3} for wood processing by-products and 16-22 Euro/m{sup 3} for forest chips). The costs by railways varied from 12 to 27 Euro/m{sup 3} on shorter distances to 47-58 Euro/m{sup 3} on longer distances. Waterway transportation was the most expensive, about 28-48 Euro/m{sup 3}. It should be emphasized that we have estimated availability and delivery costs of energy wood, not prices which are defined by the market based on supply and demand.

Forest management strategies for reducing carbon emissions, the French case

Science.gov (United States)

Valade, Aude; Luyssaert, Sebastiaan; Bellassen, Valentin; Vallet, Patrick; Martin, Manuel

2015-04-01

International agreements now recognize the role of forest in the mitigation of climate change through the levers of in-situ sequestration, storage in products and energy and product substitution. These three strategies of carbon management are often antagonistic and it is still not clear which strategy would have the most significant impact on atmospheric carbon concentrations. With a focus on France, this study compares several scenarios of forest management in terms of their effect on the overall carbon budget from trees to wood-products. We elaborated four scenarios of forest management that target different wood production objectives. One scenario is 'Business as usual' and reproduces the current forest management and wood production levels. Two scenarios target an increase in bioenergy wood production, with either long-term or short-term goals. One scenario aims at increasing the production of timber for construction. For this, an empirical regression model was developed building on the rich French inventory database. The model can project the current forest resource at a time horizon of 20 years for characteristic variables diameter, standing volume, above-ground biomass, stand age. A simplified life-cycle analysis provides a full carbon budget for each scenario from forest management to wood use and allows the identification of the scenario that most reduces carbon emissions.

Chemical investigation on wood tree species in a temperate forest, east-northern Romania

Directory of Open Access Journals (Sweden)

Teaca, C. A.

2007-02-01

Full Text Available A quantitative evaluation of wood chemical components for some tree species in a forest area from east-northern Romania is presented here, through a comparative study from 1964 to 2000. Investigation upon the wood tree-rings in a Quercus robur L. tree species, as a dominant species, as regards its chemical composition and structure of the natural polymer constituents - cellulose and lignin - was also performed through chemical methods to separate the main wood components, FT-IR spectroscopy, and thermogravimetry. Having in view the impact of climate and external factors (such as pollutant depositions, some possible correlations between wood chemical composition and its further use can be made. The FT-IR spectra give evidence of differences in the frequency domains of 3400-2900 cm-1 and 1730-1640 cm-1, due to some interactions between the chemical groups (OH, C=O. The crystallinity index of cellulose presents variations in the oak wood tree-rings. Thermogravimetry analyses show different behaviour of cellulose at thermal decomposition, as a function of radial growth and tree’s height. A preliminary chemical investigation of oak wood sawdust shows a relatively high content of mineral elements (ash, compared with a previous study performed in 1964, fact that may indicate an intense drying process of the oak tree, a general phenomenon present in European forests for this species.

Wood construction codes issues in the United States

Science.gov (United States)

Douglas R. Rammer

2006-01-01

The current wood construction codes find their origin in the 1935 Wood Handbook: Wood as an Engineering Material published by the USDA Forest Service. Many of the current design recommendations can be traced back to statements from this book. Since this time a series of development both historical and recent has led to a multi-layered system for use of wood products in...

THE PLANNING OF WOOD TRANSPORT ON THE FOREST ROADS

Directory of Open Access Journals (Sweden)

H. Hulusi Acar

2001-04-01

Full Text Available Nowadays, needs for forest and raw wood materials has been increasing with the economic developments of the societies. But, the forest areas have been decreasing because of the pressures of the societies on forest especially in developing countries. In such regions, forest areas were on high mountainous areas. This situation is the same in Turkey, especially east Black Sea region. In Turkey, forest roads are still B forms of secondary roads. The wide of these roads are minimum 4 meters, generally minimum curve radius of them are 10 meters, and some times less then that. These roads do not have pavement and maintenance works were not made there too. And these roads are not suitable for transportation with truck-trailer. The transhipment problems form a typical example of the linear programming method. When this method applied, as well as solving transportation problems, distribution problems are solved related to transhipment.

Properties of Hungarian oak(quercus conferta Kit. wood from the Hilandar Monastery forest

Directory of Open Access Journals (Sweden)

Popović Zdravko

2007-01-01

Full Text Available This paper presents the study results of the basic physical and strength properties of Hungarian oak (Quercus conferta Kit. wood from the Kakovo Monastery forests of Hilandar Monastery in Greece. Wood properties were analyzed in detail, as an indispensable proof of wood quality and its use for joinery, interiors and wooden floors. The basic physical properties of wood (moisture content at the time of tree felling, density and volume porosity and the basic strength properties (compressive strength, bending strength and module of elasticity were researched. The results are presented in Tables and in Diagrams with statistical parameters and compared to the literature data. The correlation of the study properties of wood was also analyzed.

Importance of Foliar Nitrogen Concentration to Predict Forest Productivity in the Mid-Atlantic Region

Science.gov (United States)

Yude Pan; John Hom; Jennifer Jenkins; Richard Birdsey

2004-01-01

To assess what difference it might make to include spatially defined estimates of foliar nitrogen in the regional application of a forest ecosystem model (PnET-II), we composed model predictions of wood production from extensive ground-based forest inventory analysis data across the Mid-Atlantic region. Spatial variation in foliar N concentration was assigned based on...

Factors affecting the availability of wood energy from nonindustrial private forest lands in the Northeast.

Science.gov (United States)

John J. Lindsay; Alphonse H. Gilbert; Thomas W. Birch; Thomas W. Birch

1992-01-01

Describes factors affecting the availability of fuelwood from nonindustrial private forests (NIPF) in the Northeast. The availability of market fuelwood depends heavily on tract size. The demand for land to supply the expanding urban fringe may result in a lower supply of market wood but also in more wood being cut to satisfy the owner's need for wood. NIPF owners...

Wood evidence : proper collection, documentation, and storage of wood evidence from a crime scene

Science.gov (United States)

Alex Wiedenhoeft

2006-01-01

Wood can be found at crime scenes in many forms: as a murder weapon, as material used to hide a body, or as trace evidence from forced entry or vandalism. In the course of my work at the Forest Products Laboratory, Center for Wood Anatomy Research, I have been part of several forensic investigations that were adversely affected by inappropriate procedures used to...

Carbon sequestration potential of forest land: Management for products and bioenergy versus preservation

International Nuclear Information System (INIS)

Van Deusen, P.

2010-01-01

A 40 year projection of potential carbon sequestration is based on USDA Forest Service Forest Inventory and Analysis (FIA) data from the state of Georgia. The objective is to compare carbon sequestration under a sustainable management strategy versus a preservation strategy. FIA plots are projected ahead in time with hotdeck matching. This matches each subject plot with another plot from the database that represents the subject plot at a future time. The matched plot sequences are used to provide input data to a harvest scheduling program to generate a management strategy for the state. The sequestration from the management strategy is compared with a preservation strategy that involves no harvesting. Harvested wood is assumed to go into products with various half life decay rates. Carbon sequestration is increased as increasing proportions go into wood for energy, which is treated like a product with an infinite half life. Therefore, the harvested carbon does not return immediately to the atmosphere. Public land and land close to cities is assumed to be unavailable, and all other private land is assumed to be accessible. The results are presented as gigatonnes of CO 2 equivalent to make them directly comparable to US annual carbon emissions. The conclusion is that forest management will sequester more above-ground carbon than preservation over a 40 year period if the wood is used for products with an average half life greater than 5 years.

FORDAT : an information retrieval system for forest economic data

Science.gov (United States)

Henry M. Spelter

1981-01-01

Time series data frequently used in Forest Service studies of wood products consumption have been stored in a data retrieval system on the computer of the University of Wisconsin. The data cover activity in wood processing from forest to end use. Prices and costs at succeeding stages, historical usage, production rates, and other relevant data to wood use analysis were...

Radioecology and management of contaminated forests

International Nuclear Information System (INIS)

Rantavaara, A.; Aro, L.

2003-01-01

Dose pathways from contaminated forests to man are related to stay in forests and use of forest products. Their contributions to radiation dose vary according to time after deposition and by groups of people. Wild foods are the major source of long-term internal radiation in areas where people collect mushrooms, berries and herbs, or are hunting for their own use, amounting to at least a few kilograms per capita and year. External radiation exposure will hardly exceed internal, even for forest workers. In early phase of fallout situation intercepted radioactive material will retain in tree canopies for a relatively short time. In dense young forests where trees are not too high external exposure is then at maximum because the radiation source in canopy is so close to people in forests and also due to appearance of short-lived radionuclides. Non-wood forest products are of concern to the public for a long time, but slow contamination of timber can in serious fallout situations cause the most harm to forestry. More than 80% of the income of multiple-use forestry in Finland comes from wood. The availability of domestic timber is a major issue and, if disturbed, also socio-economic consequences of contamination would become substantial. Multiple-use forestry, in addition to wood production comprises hunting, picking of berries, mushrooms and medical herbs, decorative materials, Christmas tree market, hiking and other recreational use of forests. Only few of these activities as such mean substantial addition to human radiation doses. Regulations for activity concentrations in commodities, also in various forest products in international market, are probably to be applied in the near future as a result of an IAEA project. Long-term internal exposure through wild foods is of most concern to local citizens from the point of view of radiation protection. The multiple-use forestry in northern Europe includes increasing sectors of recreational services and activities for the

Thinning and riparian buffer configuration effects on down wood abundance in headwater streams in coniferous forests

Science.gov (United States)

Adrian Ares; Deanna H. Olson; Klaus J. Puettmann

2013-01-01

Down wood is associated with the function, structure, and diversity of riparian systems. Considerable knowledge has been generated regarding down wood stocks and dynamics in temperate forests, but there are few studies on effects of silvicultural practices and riparian buffer design on down wood, particularly in headwater streams. We analyzed interactive eff ects of...

Economic Impact of Net Carbon Payments and Bioenergy Production in Fertilized and Non-Fertilized Loblolly Pine Plantations

Directory of Open Access Journals (Sweden)

Prativa Shrestha

2015-08-01

Full Text Available Sequestering carbon in forest stands and using woody bioenergy are two potential ways to utilize forests in mitigating emissions of greenhouse gases (GHGs. Such forestry related strategies are, however, greatly influenced by carbon and bioenergy markets. This study investigates the impact of both carbon and woody bioenergy markets on land expectation value (LEV and rotation age of loblolly pine (Pinus taeda L. forests in the southeastern United States for two scenarios—one with thinning and no fertilization and the other with thinning and fertilization. Economic analysis was conducted using a modified Hartman model. The amount of carbon dioxide (CO2 emitted during various activities such as management of stands, harvesting, and product decay was included in the model. Sensitivity analysis was conducted with a range of carbon offset, wood for bioenergy, and forest product prices. The results showed that LEV increased in both management scenarios as the price of carbon and wood for bioenergy increased. However, the results indicated that the management scenario without fertilizer was optimal at low carbon prices and the management scenario with fertilizer was optimal at higher carbon prices for medium and low forest product prices. Carbon payments had a greater impact on LEV than prices for wood utilized for bioenergy. Also, increase in the carbon price increased the optimal rotation age, whereas, wood prices for bioenergy had little impact. The management scenario without fertilizer was found to have longer optimal rotation ages.

When a tree falls: Controls on wood decay predict standing dead tree fall and new risks in changing forests.

Science.gov (United States)

Oberle, Brad; Ogle, Kiona; Zanne, Amy E; Woodall, Christopher W

2018-01-01

When standing dead trees (snags) fall, they have major impacts on forest ecosystems. Snag fall can redistribute wildlife habitat and impact public safety, while governing important carbon (C) cycle consequences of tree mortality because ground contact accelerates C emissions during deadwood decay. Managing the consequences of altered snag dynamics in changing forests requires predicting when snags fall as wood decay erodes mechanical resistance to breaking forces. Previous studies have pointed to common predictors, such as stem size, degree of decay and species identity, but few have assessed the relative strength of underlying mechanisms driving snag fall across biomes. Here, we analyze nearly 100,000 repeated snag observations from boreal to subtropical forests across the eastern United States to show that wood decay controls snag fall in ways that could generate previously unrecognized forest-climate feedback. Warmer locations where wood decays quickly had much faster rates of snag fall. The effect of temperature on snag fall was so strong that in a simple forest C model, anticipated warming by mid-century reduced snag C by 22%. Furthermore, species-level differences in wood decay resistance (durability) accurately predicted the timing of snag fall. Differences in half-life for standing dead trees were similar to expected differences in the service lifetimes of wooden structures built from their timber. Strong effects of temperature and wood durability imply future forests where dying trees fall and decay faster than at present, reducing terrestrial C storage and snag-dependent wildlife habitat. These results can improve the representation of forest C cycling and assist forest managers by helping predict when a dead tree may fall.

When you cannot see the forest for the trees: Effect of forest monocultures on biodiversity conservation

International Nuclear Information System (INIS)

Cordero Rivera, Adolfo

2011-01-01

Human population is growing at rates that were unimaginable only a century ago, creating such pressure on resources, which will only decrease when the decline in birth rate stabilizes population. Among these resources, wood is one of the most demanded. Global consumption of wood is currently more than 3500 million m 3, a rate multiplied by six since 1950. To meet this demand, we manage millions of hectares of forests and forest plantations, part of which are cut down each year. This logging determines drastic effects on forests, affecting the biodiversity associated and the ecosystems services provided to society. This work is a review of the structural and functional characteristics that differentiate forests and forest plantations, in spite of the confusion between both ecosystems by FAO and the forest sector companies, which have coined the oxymoron planted forests. Forest plantations are more productive than forests from the point of view of the volume of wood that can be obtained from them, and if well managed, could minimize the pressure on forests. However, they do not provide many services that forests do provide, especially in the case of monospecific plantations consisting of even aged individuals of exotic species that are managed intensively. Some of the many techniques that combine the production of wood with the conservation of biodiversity are reviewed.

Influence of large wood on channel morphology and sediment storage in headwater mountain streams, Fraser Experimental Forest, Colorado

Science.gov (United States)

Sandra E. Ryan; Erica L. Bishop; J. Michael Daniels

2014-01-01

Large fallen wood can have a significant impact on channel form and process in forested mountain streams. In this study, four small channels on the Fraser Experimental Forest near Fraser, Colorado, USA, were surveyed for channel geometries and large wood loading, including the size, source, and characteristics of individual pieces. The study is part of a larger effort...

Stream invertebrate productivity linked to forest subsidies: 37 stream-years of reference and experimental data.

Science.gov (United States)

Wallace, J Bruce; Eggert, Susan L; Meyer, Judy L; Webster, Jackson R

2015-05-01

Riparian habitats provide detrital subsidies of varying quantities and qualities to recipient ecosystems. We used long-term data from three reference streams (covering 24 stream-years) and 13-year whole-stream organic matter manipulations to investigate the influence of terrestrial detrital quantity and quality on benthic invertebrate community structure, abundance, biomass, and secondary production in rockface (RF) and mixed substrates (MS) of forested headwater streams. Using a mesh canopy covering the entire treatment stream, we examined effects of litter ex'clusion, small- and large-wood removal, and addition of artificial wood (PVC) and leaves of varying quality on organic matter standing crops and invertebrate community structure and function. We assessed differences in functional feeding group distribution between substrate types as influenced by organic matter manipulations and long-term patterns of predator and prey production in manipulated vs. reference years. Particulate organic matter standing crops in MS of the treatment stream declined drastically with each successive year of litter exclusion, approaching zero after three years. Monthly invertebrate biomass and annual secondary production was positively related to benthic organic matter in the MS habitats. Rockface habitats exhibited fewer changes than MS habitats across all organic matter manipulations. With leaf addition, the patterns of functional group distribution among MS and RF habitats returned to patterns seen in reference streams. Secondary production per unit organic matter standing crop was greatest for the leaf addition period, followed by the reference streams, and significantly less for the litter exclusion and wood removal periods. These data indicate that the limited organic matter remaining in the stream following litter exclusion and wood removal was more refractory than that in the reference streams, whereas the added leaf material was more labile and readily converted into

Net carbon flux of dead wood in forests of the Eastern US

Science.gov (United States)

C.W. Woodall; M.B. Russell; B.F. Walters; A.W. D' Amato; S. Fraver; G.M. Domke

2015-01-01

Downed dead wood (DDW) in forest ecosystems is a C pool whose net flux is governed by a complex of natural and anthropogenic processes and is critical to the management of the entire forest C pool. As empirical examination of DDW C net flux has rarely been conducted across large scales, the goal of this study was to use a remeasured inventory of DDW C and ancillary...

25 CFR 163.16 - Forest product sales without advertisement.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Forest product sales without advertisement. 163.16... FORESTRY REGULATIONS Forest Management and Operations § 163.16 Forest product sales without advertisement. (a) Sales of forest products may be made without advertisement to Indians or non-Indians with the...

Assessment and management of dead-wood habitat

Science.gov (United States)

Hagar, Joan

2007-01-01

Oregon and Washington, approximately 150 species of wildlife are reported to use dead wood in forests (O’Neil et al., 2001). Forty-seven sensitive and special-status species are associated with dead wood (Appendix A). These are key species for management consideration because concern over small or declining populations is often related to loss of suitable dead-wood habitat (Marshall et al., 1996). Primary excavators (woodpeckers) also are often the focus of dead-wood management, because they perform keystone functions in forest ecosystems by creating cavities for secondary cavity-nesters (Martin and Eadie, 1999; Aubry and Raley, 2002). A diverse guild of secondary cavity-users (including swallows, bluebirds, several species of ducks and owls, ash-throated flycatcher, flying squirrel, bats, and many other species) is unable to excavate dead wood, and therefore relies on cavities created by woodpeckers for nesting sites. Suitable nest cavities are essential for reproduction, and their availability limits population size (Newton, 1994). Thus, populations of secondary cavity-nesters are tightly linked to the habitat requirements of primary excavators. Although managers often focus on decaying wood as habitat for wildlife, the integral role dead wood plays in ecological processes is an equally important consideration for management. Rose et al. (2001) provide a thorough review of the ecological functions of dead wood in Pacific Northwest forests, briefly summarized here. Decaying wood functions in: soil development and productivity, nutrient cycling, nitrogen fixation, and carbon storage. From ridge tops, to headwater streams, to estuaries and coastal marine ecosystems, decaying wood is fundamental to diverse terrestrial and aquatic food webs. Wildlife species that use dead wood for cover or feeding are linked to these ecosystem processes through a broad array of functional roles, including facilitation of decay and trophic interactions with other organisms (Marcot, 2002

Proceedings of the 7. biennial residue-to-revenue residual wood conference 2007

International Nuclear Information System (INIS)

Raulin, J.

2007-01-01

This conference provided information on the highest and best use of residual wood, which is quickly becoming a valuable commodity. Issues concerning forest residues, sawmill wastes, agricultural residues and urban organic materials were discussed along with trends in Canadian surplus mill waste production. The evolving nature and technologies of the biomass business were highlighted with particular focus on how to generate energy and save money through the use of residual wood. Residual wood energy projects and developments in Canada, North America and Europe were outlined along with biomass development in relation to forest fires and insect disturbances. Cogeneration technologies using wood wastes for thermal heat, steam and electricity were also presented, along with transportation fuel technologies for the production of ethanol. It was noted that with the rising cost of energy, the forest industry is seeking energy solutions based on the use of residual wood. The range of economically practical residual wood solutions continues to grow as energy prices increase. The conference was attended by more than 200 delegates from the forest industry, suppliers and government representatives, to discuss policies and procedures currently in place. Industry investment is being stimulated by the potential for biofuels and biochemicals, as well as the co-operation between the forest and energy sectors. The conference featured 23 presentations, of which 12 have been catalogued separately for inclusion in this database. refs., tabs., figs

The Swedish wood fuel market

International Nuclear Information System (INIS)

Hillring, Bengt

1999-01-01

In Sweden, wood fuels are traditionally used in the Swedish forest products industry and for heating of single-family houses. More recently they are also become established as an energy source for district heating and electricity production. Energy policy, especially the energy taxation system, has favoured wood fuels and other biofuels, mainly for environmental reasons. There is now an established commercial market for wood fuels in the district heating sector, which amounts to 45 PJ and is growing 20 per cent annually. Price levels have been stable in current prices for a decade, mainly because of good access to wood fuels. Price levels are dominated by production costs on a market that is largely governed by the buyer. It is expected that the use of wood fuels will increased in Sweden in the future, which will push a further development of this section on the market and bring about technological changes in the area. (Author)

Regional Markets for Non-timber Forest Products in Eastern Brazilian Amazon

OpenAIRE

Vuola, Matleena

2013-01-01

While export of non-timber forest products (NTFPs) has been promoted as a sustainable development strategy, the literature suggests that local and regional markets are also potentially important, not only for producers but also for traders and consumers (Shackleton et al. 2007). For producers, regional markets are thought to offer more accessible and more stable markets, while for traders, these markets offer employment, and for consumers, reasonably priced, diverse, fresh food. Consumptio...

Forest biorefinery: Potential of poplar phytochemicals as value-added co-products.

Science.gov (United States)

Devappa, Rakshit K; Rakshit, Sudip K; Dekker, Robert F H

2015-11-01

The global forestry industry after experiencing a market downturn during the past decade has now aimed its vision towards the integrated biorefinery. New business models and strategies are constantly being explored to re-invent the global wood and pulp/paper industry through sustainable resource exploitation. The goal is to produce diversified, innovative and revenue generating product lines using on-site bioresources (wood and tree residues). The most popular product lines are generally produced from wood fibers (biofuels, pulp/paper, biomaterials, and bio/chemicals). However, the bark and other tree residues like foliage that constitute forest wastes, still remain largely an underexploited resource from which extractives and phytochemicals can be harnessed as by-products (biopharmaceuticals, food additives and nutraceuticals, biopesticides, cosmetics). Commercially, Populus (poplar) tree species including hybrid varieties are cultivated as a fast growing bioenergy crop, but can also be utilized to produce bio-based chemicals. This review identifies and underlines the potential of natural products (phytochemicals) from Populus species that could lead to new business ventures in biorefineries and contribute to the bioeconomy. In brief, this review highlights the importance of by-products/co-products in forest industries, methods that can be employed to extract and purify poplar phytochemicals, the potential pharmaceutical and other uses of >160 phytochemicals identified from poplar species - their chemical structures, properties and bioactivities, the challenges and limitations of utilizing poplar phytochemicals, and potential commercial opportunities. Finally, the overall discussion and conclusion are made considering the recent biotechnological advances in phytochemical research to indicate the areas for future commercial applications from poplar tree species. Crown Copyright © 2015. Published by Elsevier Inc. All rights reserved.

Forest complex of Belarus at the modern stage

Directory of Open Access Journals (Sweden)

Игорь Шарухо

2017-09-01

Full Text Available The forest is one of the main types of natural resources, the national wealth of the country that has that resource. Forests play an important role not only in maintaining the gas balance of the atmosphere, but also serve as a source of building material, fuel, paper and other useful products. The article presents information about the changes and the current state of the timber industry complex of the Republic of Belarus for the years of independence (since 1991. At the present stage of development of the forest industry was given much attention. This contributes to the high availability of forest resources, which at the moment is 40%. This factor does not only take place from the point of view of satisfaction of domestic needs but also export. Functional role of the complex – provision of economy and population in timber and products from it, as well as a variety of wild and non-wood forest products. The leading place belongs to the complex industrial activities, but a fundamental part of his development is the forestry sector, which supplies them with wood. In connection with the transition of Belarus from OKUD international standard (OKRB 005-2006 statistical reporting according to the 01.01.2011 in the article it is timber industry the timber industry. Timber industry complex of the country has a high export orientation. But the possibility of export potential is not fully used. From sales, the country receives considerably less than Europe. The reason lies in a shallow wood processing. High country’s forest cover attracts investors (China, European countries. With the participation of investors built a number of businesses. The main task of the complex in the coming years is to increase its competitiveness and efficiency and renewal of fixed assets, modernization of existing and establishment of new production facilities for deep processing of wood raw material.

Availability and use of wood-based fuels in Finland in 2020

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K.; Raesaenen, T.; Pajuoja, H. (Metsaeteho Oy, Helsinki (Finland)), Email: kalle.karha@metsateho.fi, Email: tapio.rasanen@metsateho.fi, Email: heikki.pajuoja@metsateho.fi; Elo, J.; Lahtinen, P. (Poeyry Energy Oy, Espoo (Finland)), Email: juha.elo@poyry.com, Email: perttu.lahtinen@poyry.com

2009-07-01

In Finland the overall usage target set for forest chips is 12 million m3, i.e. around 24 TWh by the year 2020. The objective of the research carried out by Metsaeteho Oy and Poeyry Energy Oy was to produce a total analysis as realistic as possible of the possibilities of increasing the use of wood-based fuels in Finland by 2020. The research shows that the growth objective set in the long-term Climate and Energy Strategy can be attained through the supply and demand for wood-based fuels. However, realizing this potential would require major investments in the entire forest chip production system, because the competitiveness of wood-based fuels in energy generation is currently not at a sufficient level. The emission trading has a strong influence on the competitiveness of wood-based fuels and the use of such fuels in energy plants. Increasing the proportion of wood-based fuels is very difficult at the current price level of the EU emission allowances (10 euro/t CO{sub 2}). A strong increase in the use of wood-based fuels would require a price level of over 25 euro/t CO{sub 2} of emission allowances. Considering the huge resources required by the forest chip production system and the current low competitiveness of forest chips, it is estimated that the use of forest chips in Finland will reach the level of 20 TWh at the earliest by the year 2020. (orig.)

Integrating concerns about wood production and sustainable forest management in the United States.

Science.gov (United States)

R.W. Haynes

2007-01-01

The implementation of Sustainable Forest Management (SFM) in the United States is strongly influenced by U.S. forest products markets and the numerous management decisions made by individual landowners and managers. These decisions are influenced by a mix of market incentives and regulatory actions reducing predictability in assessing progress towards SFM and causing...

Integrated production method for wood fuel and pulp wood in Northern Finland; Polttojakeen hankinta puun yhdistelmaekorjuussa ja integroitu energiapuun tuotantomenetelmae Pohjois-Suomessa

Energy Technology Data Exchange (ETDEWEB)

Hooli, A [Hooli Oy, Kemi (Finland); Kuitto, P J [VTT Energy, Jyvaeskylae (Finland); Ranta, T [Finntech Ltd. Oy, Jyvaeskylae (Finland)

1997-12-31

Chip production company Hooli Ltd. has built an innovative mobile chain-flail delimbing-debarking-unit which includes also a hammer crusher for wood fuel. This integrated production method for wood fuel and pulp wood based on that unit has been planned especially for the circumstances where the power or heating plants are near and the pulp mills more remote from the wood processing sites. The trees are felt into bunches and transported as whole trees or tree-sections to the roadside. The Hooli-unit delimbs and debarks the trees using multi-tree processing. The optimal bark content of Scot pine bolts after processing is under 1 %. All green branches, stops and bark are directly crushed into wood fuel in the same unit. Fuel chips are carried to the nearest power plant. The debarked bolts are transported to the pulpmills in the form of roundwood or pulpchips, thus giving better economy for the whole method. Based on first field experiments in 1995 this method has operated well. However, there are still development work ahead: e.g. good debarking quality of birch and spruce in the winter conditions. To attain the targets of the project looks promising. The project is carried out as joint project between Hooli Ltd, Finntech Ltd. Oy, the Finnish Forest Research Institute, Veitsiluoto Ltd and VTT Energy. The chain-flail delimbing-debarking-crushing unit was built at Tervolan Konepaja Ky

Integrated production method for wood fuel and pulp wood in Northern Finland; Polttojakeen hankinta puun yhdistelmaekorjuussa ja integroitu energiapuun tuotantomenetelmae Pohjois-Suomessa

Energy Technology Data Exchange (ETDEWEB)

Hooli, A. [Hooli Oy, Kemi (Finland); Kuitto, P.J. [VTT Energy, Jyvaeskylae (Finland); Ranta, T. [Finntech Ltd. Oy, Jyvaeskylae (Finland)

1996-12-31

Chip production company Hooli Ltd. has built an innovative mobile chain-flail delimbing-debarking-unit which includes also a hammer crusher for wood fuel. This integrated production method for wood fuel and pulp wood based on that unit has been planned especially for the circumstances where the power or heating plants are near and the pulp mills more remote from the wood processing sites. The trees are felt into bunches and transported as whole trees or tree-sections to the roadside. The Hooli-unit delimbs and debarks the trees using multi-tree processing. The optimal bark content of Scot pine bolts after processing is under 1 %. All green branches, stops and bark are directly crushed into wood fuel in the same unit. Fuel chips are carried to the nearest power plant. The debarked bolts are transported to the pulpmills in the form of roundwood or pulpchips, thus giving better economy for the whole method. Based on first field experiments in 1995 this method has operated well. However, there are still development work ahead: e.g. good debarking quality of birch and spruce in the winter conditions. To attain the targets of the project looks promising. The project is carried out as joint project between Hooli Ltd, Finntech Ltd. Oy, the Finnish Forest Research Institute, Veitsiluoto Ltd and VTT Energy. The chain-flail delimbing-debarking-crushing unit was built at Tervolan Konepaja Ky

Competitive outcomes between wood-decaying fungi are altered in burnt wood.

Science.gov (United States)

Edman, Mattias; Eriksson, Anna-Maria

2016-06-01

Fire is an important disturbance agent in boreal forests where it creates a wide variety of charred and other types of heat-modified dead wood substrates, yet how these substrates affect fungal community structure and development within wood is poorly understood. We allowed six species of wood-decaying basidiomycetes to compete in pairs in wood-discs that were experimentally burnt before fungal inoculation. The outcomes of interactions in burnt wood differed from those in unburnt control wood for two species:Antrodia sinuosanever lost on burnt wood and won over its competitor in 67% of the trials compared to 40% losses and 20% wins on unburnt wood. In contrast, Ischnoderma benzoinumwon all interactions on unburnt wood compared to 33% on burnt wood. However, the responses differed depending on the identity of the competing species, suggesting an interaction between competitor and substrate type. The observed shift in competitive balance between fungal species probably results from chemical changes in burnt wood, but the underlying mechanism needs further investigation. Nevertheless, the results indicate that forest fires indirectly structure fungal communities by modifying dead wood, and highlight the importance of fire-affected dead wood substrates in boreal forests. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Potential greenhouse gas benefits of transatlantic wood pellet trade

International Nuclear Information System (INIS)

Dwivedi, Puneet; Khanna, Madhu; Bailis, Robert; Ghilardi, Adrian

2014-01-01

Power utility companies in the United Kingdom are using imported wood pellets from the southern region of the United States for electricity generation to meet the legally binding mandate of sourcing 15% of the nation’s total energy consumption from renewable sources by 2020. This study ascertains relative savings in greenhouse gas (GHG) emissions for a unit of electricity generated using imported wood pellet in the United Kingdom under 930 different scenarios: three woody feedstocks (logging residues, pulpwood, and logging residues and pulpwood combined), two forest management choices (intensive and non-intensive), 31 plantation rotation ages (year 10 to year 40 in steps of 1 year), and five power plant capacities (20–100 MW in steps of 20 MW). Relative savings in GHG emissions with respect to a unit of electricity derived from fossil fuels in the United Kingdom range between 50% and 68% depending upon the capacity of power plant and rotation age. Relative savings in GHG emissions increase with higher power plant capacity. GHG emissions related to wood pellet production and transatlantic shipment of wood pellets typically contribute about 48% and 31% of total GHG emissions, respectively. Overall, use of imported wood pellets for electricity generation could help in reducing the United Kingdom’s GHG emissions. We suggest that future research be directed to evaluation of the impacts of additional forest management practices, changing climate, and soil carbon on the overall savings in GHG emissions related to transatlantic wood pellet trade. (paper)

Ectomycorrhizal community structure and function in relation to forest residue harvesting and wood ash applications

Energy Technology Data Exchange (ETDEWEB)

Mahmood, Shahid

2000-05-01

Ectomycorrhizal fungi form symbiotic associations with tree roots and assist in nutrient-uptake and -cycling in forest ecosystems, thereby constituting a most significant part of the microbial community. The aims of the studies described in this thesis were to evaluate the potential of DNA-based molecular methods in below-ground ectomycorrhizal community studies and to investigate changes in ectomycorrhizal communities on spruce roots in sites with different N deposition, and in sites subjected to harvesting of forest residues or application of wood ash. The ability of selected ectomycorrhizal fungi to mobilise nutrients from wood ash and to colonise root systems in the presence and absence of ash was also studied. In total 39 ectomycorrhizal species were detected in the experimental forests located in southern Sweden. At each site five to six species colonised around 60% of the root tips. The dominant species, common to the sites, were Tylospora fibrillosa, Thelephora terrestris and Cenococcum geophilum. Differences between two sites with differing levels of N deposition suggested that community structure may be influenced by N deposition, although site history, location and degree of isolation may also influence species composition. Repeated harvesting of forest residues reduced numbers of mycorrhizal roots in the humus layer to approximately 50% of that in control plots but no shift in the ectomycorrhizal community could be detected. At another site, application of granulated wood ash induced a shift in ectomycorrhizal community structure and three ectomycorrhizal fungi ('ash fungi') were found to colonise ash granules. Two 'ash fungi' showed a superior ability to solubilise stabilised wood ash in laboratory experiments compared to other ectomycorrhizal isolates from the same site. In laboratory microcosms containing intact mycorrhizal mycelia, colonisation of wood ash patches by one 'ash fungus' was good whereas colonisation by

Ectomycorrhizal community structure and function in relation to forest residue harvesting and wood ash applications

International Nuclear Information System (INIS)

Mahmood, Shahid

2000-05-01

Ectomycorrhizal fungi form symbiotic associations with tree roots and assist in nutrient-uptake and -cycling in forest ecosystems, thereby constituting a most significant part of the microbial community. The aims of the studies described in this thesis were to evaluate the potential of DNA-based molecular methods in below-ground ectomycorrhizal community studies and to investigate changes in ectomycorrhizal communities on spruce roots in sites with different N deposition, and in sites subjected to harvesting of forest residues or application of wood ash. The ability of selected ectomycorrhizal fungi to mobilise nutrients from wood ash and to colonise root systems in the presence and absence of ash was also studied. In total 39 ectomycorrhizal species were detected in the experimental forests located in southern Sweden. At each site five to six species colonised around 60% of the root tips. The dominant species, common to the sites, were Tylospora fibrillosa, Thelephora terrestris and Cenococcum geophilum. Differences between two sites with differing levels of N deposition suggested that community structure may be influenced by N deposition, although site history, location and degree of isolation may also influence species composition. Repeated harvesting of forest residues reduced numbers of mycorrhizal roots in the humus layer to approximately 50% of that in control plots but no shift in the ectomycorrhizal community could be detected. At another site, application of granulated wood ash induced a shift in ectomycorrhizal community structure and three ectomycorrhizal fungi ('ash fungi') were found to colonise ash granules. Two 'ash fungi' showed a superior ability to solubilise stabilised wood ash in laboratory experiments compared to other ectomycorrhizal isolates from the same site. In laboratory microcosms containing intact mycorrhizal mycelia, colonisation of wood ash patches by one 'ash fungus' was good whereas colonisation by Piloderma croceum was poor. In a

Leaf photosynthetic traits scale with hydraulic conductivity and wood density in Panamanian forest canopy trees.

Science.gov (United States)

L.S. Santiago; G. Goldstein; F.C. Meinzer; J.B. Fisher; K. Maehado; D. Woodruff; T. Jones

2004-01-01

We investigated how water transport capacity, wood density and wood anatomy were related to leaf photosynthetic traits in two lowland forests in Panama. Leaf-specific hydraulic conductivity (kL) of upper branches was positively correlated with maximum rates of net CO2, assimilation per unit leaf area (Aarea...

Establishment of ectomycorrhizal fungal community on isolated Nothofagus cunninghamii seedlings regenerating on dead wood in Australian wet temperate forests: does fruit-body type matter?

Science.gov (United States)

Tedersoo, Leho; Gates, Genevieve; Dunk, Chris W; Lebel, Teresa; May, Tom W; Kõljalg, Urmas; Jairus, Teele

2009-08-01

Decaying wood provides an important habitat for animals and forms a seed bed for many shade-intolerant, small-seeded plants, particularly Nothofagus. Using morphotyping and rDNA sequence analysis, we compared the ectomycorrhizal fungal community of isolated N. cunninghamii seedlings regenerating in decayed wood against that of mature tree roots in the forest floor soil. The /cortinarius, /russula-lactarius, and /laccaria were the most species-rich and abundant lineages in forest floor soil in Australian sites at Yarra, Victoria and Warra, Tasmania. On root tips of seedlings in dead wood, a subset of the forest floor taxa were prevalent among them species of /laccaria, /tomentella-thelephora, and /descolea, but other forest floor dominants were rare. Statistical analyses suggested that the fungal community differs between forest floor soil and dead wood at the level of both species and phylogenetic lineage. The fungal species colonizing isolated seedlings on decayed wood in austral forests were taxonomically dissimilar to the species dominating in similar habitats in Europe. We conclude that formation of a resupinate fruit body type on the underside of decayed wood is not necessarily related to preferential root colonization in decayed wood. Rather, biogeographic factors as well as differential dispersal and competitive abilities of fungal taxa are likely to play a key role in structuring the ectomycorrhizal fungal community on isolated seedlings in decaying wood.

Forest biomass flow for fuel wood, fodder and timber security among tribal communities of Jharkhand.

Science.gov (United States)

Islam, M A; Quli, S M S; Rai, R; Ali, Angrej; Gangoo, S A

2015-01-01

The study investigated extraction and consumption pattern of fuel wood, fodder and timber and forest biomass flow for fuel wood, fodder and timber security among tribal communities in Bundu block of Ranchi district in Jharkhand (India). The study is based on personal interviews of the selected respondents through structured interview schedule, personal observations and participatory rural appraisal tools i.e. key informant interviews and focus group discussions carried out in the sample villages, using multi-stage random sampling technique. The study revealed that the total extraction of fuel wood from different sources in villages was 2978.40 tons annum(-1), at the rate of 0.68 tons per capita annum(-1), which was mostly consumed in cooking followed by cottage industries, heating, community functions and others. The average fodder requirement per household was around 47.77 kg day(-1) with a total requirement of 14227.34 tons annum(-1). The average timber requirement per household was computed to be 0.346 m3 annum(-1) accounting for a total timber demand of 282.49 m3 annum(-1), which is mostly utilized in housing, followed by agricultural implements, rural furniture, carts and carriages, fencing, cattle shed/ store house and others. Forest biomass is the major source of fuel wood, fodder and timber for the primitive societies of the area contributing 1533.28 tons annum(-1) (51.48%) of the total fuel wood requirement, 6971.55 tons annum(-1) (49.00%) of the total fodder requirement and 136.36 m3 annum(-1) (48.27%) of the total timber requirement. The forest biomass is exposed to enormous pressure for securing the needs by the aboriginal people, posing great threat to biodiversity and environment of the region. Therefore, forest biomass conservation through intervention of alternative avenues is imperative to keep pace with the current development and future challenges in the area.

Supply and demand for wood: a worldwide perspective?

Science.gov (United States)

Sally. Duncan

1998-01-01

In a unique effort to compare and contrast differing views on future supply and demand for wood, a study found that demand for wood will increase, but there is no evidence of a crisis at the world scale. Opportunities to increase wood production, however, are limited and trade-offs among competing uses of forests are inevitable. A complex of factors determine supply...

PRESTO: online calculation of carbon in harvested wood products

Science.gov (United States)

Coeli M. Hoover; Sarah J. Beukema; Donald C.E. Robinson; Katherine M. Kellock; Diana A. Abraham

2014-01-01

Carbon stored in harvested wood products is recognized under international carbon accounting protocols, and some crediting systems may permit the inclusion of harvested wood products when calculating carbon sequestration. For managers and landowners, however, estimating carbon stored in harvested wood products may be difficult. PRESTO (PRoduct EStimation Tool Online)...

Global climate change adaptation: examples from Russian boreal forests

International Nuclear Information System (INIS)

Krankina, O.N.; Dixon, R.K.; Kirilenko, A.P.; Kobak, K.I.

1997-01-01

The Russian Federation contains approximately 20% of the world's timber resources and more than half of all boreal forests. These forests play a prominent role in environmental protection and economic development at global, national, and local levels, as well as, provide commodities for indigenous people and habitat for a variety of plant and animal species. The response and feedbacks of Russian boreal forests to projected global climate change are expected to be profound. Current understanding of the vulnerability of Russian forest resources to projected climate change is discussed and examples of possible adaptation measures for Russian forests are presented including: (1) artificial forestation techniques that can be applied with the advent of failed natural regeneration and to facilitate forest migration northward; (2) silvicultural measures that can influence the species mix to maintain productivity under future climates; (3) identifying forests at risk and developing special management adaption measures for them: (4) alternative processing and uses of wood and non-wood products from future forests; and (5) potential future infrastructure and transport systems that can be employed as boreal forests shift northward into melting permafrost zones. Current infrastructure and technology can be employed to help Russian boreal forests adapt to projected global environmental change, however many current forest management practices may have to be modified. Application of this technical knowledge can help policymakers identify priorities for climate change adaptation

Non-energy markets for small roundwood, forest residues and short rotation coppice

Energy Technology Data Exchange (ETDEWEB)

Watt, G.

1995-06-01

Competition for roundwood is intense at the present time with prices ranging from approximately Pound 20 to Pound 51 per green tonne delivered at mill. The sawmilling industry produces nearly 2 million green tonnes of residues annually from converting British roundwood and about 85% of this is used by the panelboard and paperboard mills. The remaining 15%, comprising mostly bark, and some of the unpeeled chips are used as material for mulching, landscaping and horticultural use, play areas, paths and horse gallops, soil composting and soil conditioning. Wood shavings and sawdust is produced by joinery and milling firms from imported sawn timber and amounts to about 300,000 tonnes/annum. Approximately 70% of this is used for higher priced markets, bedding for horses, chicken and turkeys, cattle and other uses. The remaining 30% is used in the wood processing industry. An increasing volume of solid wood waste which previously went for landfill sites is now being recycled and this trend is expected to continue. Only a very small proportion of the forest residues (tree tops and branches) produced each year is utilised and most of this material is used as mulch for horticultural and landscape uses. Markets for material from traditional short rotation coppice are limited relative to potential production but work is underway to develop new markets. There are no established markets for recently planted non-traditional coppice of willow and poplar with potential for energy production. Trials organised by ETSU and the DTI have indicated the suitability of the material for chipboard production provided the bark percentage is not too high. (author)

Non-energy markets for small roundwood, forest residues and short rotation coppice

International Nuclear Information System (INIS)

Watt, G.

1995-01-01

Competition for roundwood is intense at the present time with prices ranging from approximately Pound 20 to Pound 51 per green tonne delivered at mill. The sawmilling industry produces nearly 2 million green tonnes of residues annually from converting British roundwood and about 85% of this is used by the panelboard and paperboard mills. The remaining 15%, comprising mostly bark, and some of the unpeeled chips are used as material for mulching, landscaping and horticultural use, play areas, paths and horse gallops, soil composting and soil conditioning. Wood shavings and sawdust is produced by joinery and milling firms from imported sawn timber and amounts to about 300,000 tonnes/annum. Approximately 70% of this is used for higher priced markets, bedding for horses, chicken and turkeys, cattle and other uses. The remaining 30% is used in the wood processing industry. An increasing volume of solid wood waste which previously went for landfill sites is now being recycled and this trend is expected to continue. Only a very small proportion of the forest residues (tree tops and branches) produced each year is utilised and most of this material is used as mulch for horticultural and landscape uses. Markets for material from traditional short rotation coppice are limited relative to potential production but work is underway to develop new markets. There are no established markets for recently planted non-traditional coppice of willow and poplar with potential for energy production. Trials organised by ETSU and the DTI have indicated the suitability of the material for chipboard production provided the bark percentage is not too high. (author)

The greenhouse gas and energy impacts of using wood instead of alternatives in residential construction in the United States

International Nuclear Information System (INIS)

Upton, Brad; Miner, Reid; Spinney, Mike; Heath, Linda S.

2008-01-01

Data developed by the Consortium for Research on Renewable Industrial Materials were used to estimate savings of greenhouse gas emissions and energy consumption associated with use of wood-based building materials in residential construction in the United States. Results indicate that houses with wood-based wall systems require 15-16% less total energy for non-heating/cooling purposes than thermally comparable houses employing alternative steel- or concrete-based building systems. Results for non-renewable energy consumption are essentially the same as those for total energy, reflecting the fact that most of the displaced energy is in fossil fuels. Over a 100-year period, net greenhouse gas emissions associated with wood-based houses are 20-50% lower than emissions associated with thermally comparable houses employing steel- or concrete-based building systems. Assuming 1.5 million single-family housing starts per year, the difference between wood and non-wood building systems represents about 9.6 Mt of CO 2 equivalents per year. The corresponding energy benefit associated with wood-based building materials is approximately 132 PJ year -1 . These estimates represent about 22% of embodied energy and 27% of embodied greenhouse gas emissions in the residential sector of the US economy. The results of the analysis are very sensitive to assumptions and uncertainties regarding the fate of forestland that is taken out of wood production due to reduced demand for wood, the continued production of co-products where demand for wood products is reduced, and the rate at which carbon accumulates in forests

Forest resource economics and policy research

International Nuclear Information System (INIS)

Ellefson, P.V.

1989-01-01

This book contains chapters relating to forest economics. Included are the following chapters: Forecasting demand and supply of forest resources, products, and services; Wood fiber production; Forestry sector environmental effects

Machinery for Forest Chip Production in Finland in 2007 and in the Future

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, Kalle (Metsaeteho Oy, P.O. Box 101, FI-00171 Helsinki (Finland))

2008-10-15

Metsaeteho Oy's study consisted of a survey of the production machinery for forest chips used by energy plants in 2007. The major forest chip suppliers in Finland were involved in the study. In addition, the machinery and equipment stocked by the manufacturers and vendors of energy wood harvester heads, stump lifting devices, and chippers were also surveyed. The study provided also an estimate of future machinery requirements for forest chip production in Finland. The study estimated that a total of 1,100 machine and truck units were employed in the production of forest chips for energy plants in 2007. A total of 770 machine and truck units were contracted for the major forest chip suppliers in 2007. Increasing forest chip consumption will considerable increase the demand for additional forest chip production resources in the future. If the consumption of forest chips by energy plants in 2015 reaches 15 TWh, i.e. about 7.5 mill. m3, then the forest machine and truck requirement will be over 1,700 units. The corresponding machinery requirement at an energy plant with a forest chip consumption of 25 TWh (approx. 12.5 mill. m3), will be close to 2,300 machine and truck units

Restoring Sustainable Forests on Appalachian Mined Lands for Wood Products, Renewable Energy, Carbon Sequestration, and Other Ecosystem Services

Energy Technology Data Exchange (ETDEWEB)

Burger, James A

2005-07-20

The overall purpose of this project is to evaluate the biological and economic feasibility of restoring high-quality forests on mined land, and to measure carbon sequestration and wood production benefits that would be achieved from forest restoration procedures. We are currently estimating the acreage of lands in Virginia, West Virginia, Kentucky, Ohio, and Pennsylvania mined under SMCRA and reclaimed to non-forested post-mining land uses that are not currently under active management, and therefore can be considered as available for carbon sequestration. To determine actual sequestration under different forest management scenarios, a field study was installed as a 3 x 3 factorial in a random complete block design with three replications at each of three locations, one each in Ohio, West Virginia, and Virginia. The treatments included three forest types (white pine, hybrid poplar, mixed hardwood) and three silvicultural regimes (competition control, competition control plus tillage, competition control plus tillage plus fertilization). Each individual treatment plot is 0.5 acres. Each block of nine plots is 4.5 acres, and the complete installation at each site is 13.5 acres. During the reporting period we determined that by grinding the soil samples to a finer particle size of less than 250 μm (sieve No. 60), the effect of mine soil coal particle size on the extent to which these particles will be oxidized during the thermal treatment of the carbon partitioning procedure will be eliminated, thus making the procedure more accurate and precise. In the second phase of the carbon sequestration project, we focused our attention on determining the sample size required for carbon accounting on grassland mined fields in order to achieve a desired accuracy and precision of the final soil organic carbon (SOC) estimate. A mine land site quality classification scheme was developed and some field-testing of the methods of implementation was completed. The classification model

Sustainability Impact Assessment on the Production and Use of Different Wood and Fossil Fuels Employed for Energy Production in North Karelia, Finland

Directory of Open Access Journals (Sweden)

Matias Pekkanen

2012-11-01

Full Text Available The utilization rate of woody biomass in eastern Finland is high and expected to increase further in the near future as set out in several regional, national and European policies and strategies. The aim of this study was to assess the sustainability impacts of changes in fuel consumption patterns. We investigated fossil and woody biomass-based energy production chains in the region of North Karelia, focusing on some economic, environmental and social indicators. Indicators were selected based on stakeholder preferences and evaluated using the Tool for Sustainability Impact Assessment (ToSIA. The analysis was based on representative values from National Forest Inventory data, scientific publications, national and regional statistics, databases, published policy targets and expert opinion. From the results it became evident that shifting from fossil to wood-based energy production implies some trade-offs. Replacing oil with woody biomass in energy production would increase the local value added remaining in the region, create employment opportunities and would reduce total GHG emissions. However, firewood, wood chips from small-diameter trees from early thinning and wood pellets have high production costs. Moreover, large greenhouse gas emission resulted from wood pellet production. The case study generated valuable reference data for future sustainability assessments and demonstrated the usefulness of ToSIA as a tool presenting existing knowledge on sustainability impacts of alternative energy supply chains to inform decision making.

Thinning alternatives for forest management; Metsaenkasvatus ja harvennusvaihtoehdot

Energy Technology Data Exchange (ETDEWEB)

Mielikaeinen, K; Hirvelae, H; Haerkoenen, K; Malinen, J [Finnish Forest Research Inst., Vantaa (Finland)

1995-11-01

The amount of economically producible energy wood, the effects of energy wood harvesting on the development of forests, and the changes required by harvesting of energy wood on the forest processing instructions at the area of the Forestry Board of Central Ostrobothnia were investigated. The calculations were made using the Metsaelaskelma (Forest calculation) MELA program. At the energy wood production cost level 45 FIM/MWh, and when the energy wood competes with the industrial wood, the annual energy wood accumulation was about 120 000 m{sup 3}, which would be sufficient for three heating plants using about 100 000 m{sup 3} of chips annually. Even if the fellings of industrial wood would remain on the low level of the beginning of 1990`s the harvesting of energy wood would not become much higher than this. By harvesting of energy wood it is impossible to effect on the forestry state and the future development of the Finnish forests remarkably before the separate harvesting of energy wood becomes profitable. Harvesting of felling residues from spruce predominant final cutting sites and integrated harvesting of pine predominant first thinning forests would be more profitable harvesting methods than the separate harvesting. On the basis of the information on the future net income obtained from the forests, the harvesting of the energy wood seemed, however, to be a profitable alternative. Harvesting of energy wood was not observed to effect on the forest cultivation models remarkably because the harvesting of energy wood was just a small fragment of the complete forest processing chain (first thinning phase) studied, and the economical profitability controlled the thinnings strongly independently on where the wood was utilized. (author)

Effects of harvesting on spatial and temporal diversity of carbon stocks in a boreal forest landscape.

Science.gov (United States)

Ter-Mikaelian, Michael T; Colombo, Stephen J; Chen, Jiaxin

2013-10-01

Carbon stocks in managed forests of Ontario, Canada, and in harvested wood products originated from these forests were estimated for 2010-2100. Simulations included four future forest harvesting scenarios based on historical harvesting levels (low, average, high, and maximum available) and a no-harvest scenario. In four harvesting scenarios, forest carbon stocks in Ontario's managed forest were estimated to range from 6202 to 6227 Mt C (millions of tons of carbon) in 2010, and from 6121 to 6428 Mt C by 2100. Inclusion of carbon stored in harvested wood products in use and in landfills changed the projected range in 2100 to 6710-6742 Mt C. For the no-harvest scenario, forest carbon stocks were projected to change from 6246 Mt C in 2010 to 6680 Mt C in 2100. Spatial variation in projected forest carbon stocks was strongly related to changes in forest age (r = 0.603), but had weak correlation with harvesting rates. For all managed forests in Ontario combined, projected carbon stocks in combined forest and harvested wood products converged to within 2% difference by 2100. The results suggest that harvesting in the boreal forest, if applied within limits of sustainable forest management, will eventually have a relatively small effect on long-term combined forest and wood products carbon stocks. However, there was a large time lag to approach carbon equality, with more than 90 years with a net reduction in stored carbon in harvested forests plus wood products compared to nonharvested boreal forest which also has low rates of natural disturbance. The eventual near equivalency of carbon stocks in nonharvested forest and forest that is harvested and protected from natural disturbance reflects both the accumulation of carbon in harvested wood products and the relatively young age at which boreal forest stands undergo natural succession in the absence of disturbance.

Wood production potential in poplar plantations in Sweden

International Nuclear Information System (INIS)

Christersson, Lars

2010-01-01

Shortage of oil, large variations in exports from Russia of wood to Europe, plenty of abandoned agriculture land, new ideas about a more intensive silviculture; these circumstances are driving forces in Sweden for planting fast-growing poplar and hybrid aspen clones on suitable land. The advantage of such trees is that the wood can be used for both energy (heat, biofuels, electricity), paper and for construction. Poplar clones bred in the USA and Belgium, and older hybrid aspen clones from Sweden, together with new poplar clones collected and selected for Swedish conditions from British Columbia, Canada, were planted during the 1990s in south and central Sweden. The stem diameters and heights of the trees have been measured during the last 10 years and the woody biomass production above ground has been calculated. MAI for all the plantations is 10-31 m 3 or 3-10 ton DM per hectare with the highest annual woody production of 45 m 3 or 15 ton DM per hectare in some years in a very dense plantation in the most southern part of Sweden. All the plantations have been fenced for at least the first ten years. The damage has been caused by stem canker, insects, leaf rust and by moose after removal of the fences. The possibilities for the use of poplar plantations as energy forest and vegetation filters are discussed. (author)

DIVERSITY, STRUCTURAL PARAMETERS AND NON-TIMBER FOREST PRODUCTS IN THE FOREST RESERVE OF BONEPOUPA (DOUALA, CAMEROON

Directory of Open Access Journals (Sweden)

Jean Paul Kamdem

2013-12-01

Full Text Available http://dx.doi.org/10.5902/1980509812363In order to come up with a sustainable use of forest ecosystems in Cameroon, its vegetal diversity has been inventoried; the plant potentials and the structural parameters were studied in the forest reserve of Bonepoupa. Ten non-continuous plots of 200 m² were done and the materialization of the lines was done with a topofil put at the centre of the field with ropes at 5 m each of the topofil. In addition, ninety people were interviewed in order to know the potential use of species in this region. Up to 172 individuals with Diameter at Breast Height (DBH ≥ 5 cm divided into 27 species, 25 genera and 18 families were inventoried and the coefficient of abundance-dominance was determined. The diversity index of Shannon (H’ was H’1 = 4.17 ± 0.45 with H’1max = 4.75 and the evenness was R1 = 0.88. Taking into account herbaceous species, H’ determined by the coefficient of abundance-dominance was H’2 = 4.74 ± 0.56 with H’2max = 5.70 and the evenness  was  R2 = 0.83. The  total  basal  area  was 19.69 m2/ha and the density was 860 individuals/ha. These results indicate that herbaceous significantly modifies the value of the diversity index and that forest reserve of Bonepoupa is experiencing a problem of conservation which is due to a lack of its appropriate management. The knowledge of non-timber forest products and their use as food as well as medicinal resources by local population might be helpful for the sustainable management of resources in this forest reserve.