WorldWideScience

Sample records for non-oblique double layers

  1. Non-oblique Correction in Extenden Technicolor Theory

    CERN Document Server

    Kitazawa, N

    1993-01-01

    We study radiative corrections on $Zb{\\bar b}$ vertex generated by the ETC gauge bosons, ``diagonal'' as well as sideways. Although the oblique corrections due to the ETC bosons are small in comparison with the oblique correction due to the technicolor dynamics, the non-oblique corrections result in substantial shift of contour plot in the $S$-$T$ plane. We show that such a shift due to the non-oblique corrections is actually important for discussing $S$ and $T$ values in the technicolor models.

  2. An Electromagnetic GL Double Layered Cloak

    CERN Document Server

    Xie, Ganquan; Xie, Feng; Xie, Lee

    2009-01-01

    In this paper, we propose a new electromagnetic (EM) GL double layered cloak. The GL double layered cloak is consist of two sphere annular layers, $R_1 \\le r \\le R_2$ and $R_2 \\le r \\le R_3$. Two type cloak materials are proposed and installed in the each layer, respectively. The outer layer cloak of the GL double layered cloak has the invisible function, the inner layer cloak has fully absorption function. The GL double layered metamaterials are weak degenerative and weak dispersive. When the source is located outside of the GL double layered cloak, the excited EM wave field propagation outside of the double layered cloak is as same as in free space and never be disturbed by the cloak; also, the exterior EM wave can not penetrate into the inner layer and concealment. When local sources are located inside of the GL double cloaked concealment with the normal EM materials, the excited EM wave is propagating under Maxwell equation governing, it is complete absorbed by the inner layer cloak of GL double cloak and...

  3. Dynamical Aspects of Electrostatic Double Layers

    DEFF Research Database (Denmark)

    Raadu, M.A.; Juul Rasmussen, J.

    1988-01-01

    Electrostatic double layers have been proposed as an acceleration mechanism in solar flares and other astrophysical objects. They have been extensively studied in the laboratory and by means of computer simulations. The theory of steady-state double layers implies several existence criteria...

  4. Stationary Double Layers in a Collisionless Magnetoplasma

    DEFF Research Database (Denmark)

    Noriyoshi, Sato; Mieno, Tetsu; Hatakeyama, Rikizo;

    1983-01-01

    Stationary double layers are generated in a magnetoplasma by applying potential differences between two heated plates on which the plasma is produced by surface ionization. By measuring the double-layer formation process, a localized potential drop is found to be formed initially in front of the ...

  5. Electric fields and double layers in plasmas

    Science.gov (United States)

    Singh, Nagendra; Thiemann, H.; Schunk, R. W.

    1987-05-01

    Various mechanisms for driving double layers in plasmas are briefly described, including applied potential drops, currents, contact potentials, and plasma expansions. Some dynamical features of the double layers are discussed. These features, as seen in simulations, laboratory experiments, and theory, indicate that double layers and the currents through them undergo slow oscillations which are determined by the ion transit time across an effective length of the system in which double layers form. It is shown that a localized potential dip forms at the low potential end of a double layer, which interrupts the electron current through it according to the Langmuir criterion, whenever the ion flux into the double is disrupted. The generation of electric fields perpendicular to the ambient magnetic field by contact potentials is also discussed. Two different situations were considered; in one, a low-density hot plasma is sandwiched between high-density cold plasmas, while in the other a high-density current sheet permeates a low-density background plasma. Perpendicular electric fields develop near the contact surfaces. In the case of the current sheet, the creation of parallel electric fields and the formation of double layers are also discussed when the current sheet thickness is varied. Finally, the generation of electric fields and double layers in an expanding plasma is discussed.

  6. Double layer dynamics in a collisionless magnetoplasma

    DEFF Research Database (Denmark)

    Iizuka, S.; Michelsen, Poul; Juul Rasmussen, Jens

    1985-01-01

    Investigations of double layer dynamics are performed in a Q-machine plasma by applying a positive step potential to a cold end-plate collector. The double layer created at the grounded plasma source just after the pulse is applied propagates towards the collector with the plasma flow speed. Large...... oscillations occur in the plasma current which is related to a recurring formation and propagation of the double layer. The current is limited during the propagation by a growing negative potential dip formed on the low-potential tail. Similar phenomena appear on the low-potential tail of the stationary double...... layer formed by applying a potential difference between two plasma sources...

  7. Double Layer Dynamics in a Collisionless Magnetoplasma

    DEFF Research Database (Denmark)

    Iizuka, S.; Michelsen, Poul; Juul Rasmussen, Jens

    An experimental investigation of the dynamics of double layers is presented. The experiments are performed in a Q-machine plasma and the double layers are generated by applying a positive step potential to a cold collector plate terminating the plasma column. The double layer is created...... at the grounded plasma source just after the pulse is applied and it propagates towards the collector with a speed around the ion acoustic speed. When the collector is biased positively, large oscillations are obserced in the plasma current. These oscillations are found to be related to a recurring formation...... difference is applied between two plasmas in a Q-machine with two sources. In this case a stationary double layer forms in the plasma column, but the low potential tail is subject to "back and forth" oscillations leading to large amplitude current oscillations....

  8. Three step double layers in the laboratory. [plasma physics

    Science.gov (United States)

    Bailey, Andrew, III; Hershkowitz, Noah

    1988-01-01

    A new class of stationary double layer structure, with three or more distinct steps, is demonstrated in the laboratory. A large monotonic potential increase results from a series of smaller double layers. In many respects, these double layer structures resemble those inferred from satellite measurements of auroral double layers. This new class of double layer appears to depend on turbulence for its existence and to be a hybrid structure, intermediate between anomalous resistivity and BGK double layers.

  9. Synthesis of layered double hydroxides from eggshells

    Energy Technology Data Exchange (ETDEWEB)

    Li Songnan [Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, 150001 (China); Wang Fangyong [College of Engineering and Technology, Northeast Forestry University, 150001 (China); Jing Xiaoyan [Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, 150001 (China); Wang Jun, E-mail: zhqw1888@sohu.com [Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, 150001 (China); Saba, Jamil; Liu Qi; Ge Lan; Song Dalei; Zhang Milin [Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, 150001 (China)

    2012-01-16

    Graphical abstract: This is the XRD pattern and TEM image of 4Ca-Al layered double hydroxide, which is obtained from eggshells. It can be seen that the sample is of layered double hydroxide and shows the plate-like agglomerations with an average size of 20-100 nm. Highlights: Black-Right-Pointing-Pointer We synthesize layered double hydroxides from eggshells. Black-Right-Pointing-Pointer Eggshells are the mainly material in this method. Black-Right-Pointing-Pointer The additional alkaline solution is not required. - Abstract: Ca-Al and Ca-Fe layered double hydroxides (LDHs) were successfully synthesized from chicken eggshells by an ultrasonic wave assistant method. The products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FT-IR) techniques. XRD and TEM analyses showed that the 4Ca-Al LDHs were of high purity but other samples were not. The present study provides a simple, efficient and environmental friendly method to obtain LDHs from biowaste eggshells, in which additional alkaline solution is not required for synthesis. Moreover, eggshells provide all the requisite bivalent metal ions, which are needed to form layered double hydroxides.

  10. Double layered tailorable advanced blanket insulation

    Science.gov (United States)

    Falstrup, D.

    1983-01-01

    An advanced flexible reusable surface insulation material for future space shuttle flights was investigated. A conventional fly shuttle loom with special modifications to weave an integral double layer triangular core fabric from quartz yarn was used. Two types of insulating material were inserted into the cells of the fabric, and a procedure to accomplish this was developed. The program is follow up of a program in which single layer rectangular cell core fabrics are woven and a single type of insulating material was inserted into the cells.

  11. Reversible Heating in Electric Double Layer Capacitors.

    Science.gov (United States)

    Janssen, Mathijs; van Roij, René

    2017-03-03

    A detailed comparison is made between different viewpoints on reversible heating in electric double layer capacitors. We show in the limit of slow charging that a combined Poisson-Nernst-Planck and heat equation, first studied by d'Entremont and Pilon [J. Power Sources 246, 887 (2014)JPSODZ0378-775310.1016/j.jpowsour.2013.08.024], recovers the temperature changes as predicted by the thermodynamic identity of Janssen et al. [Phys. Rev. Lett. 113, 268501 (2014)PRLTAO0031-900710.1103/PhysRevLett.113.268501], and disagrees with the approximative model of Schiffer et al. [J. Power Sources 160, 765 (2006)JPSODZ0378-775310.1016/j.jpowsour.2005.12.070] that predominates the literature. The thermal response to the adiabatic charging of supercapacitors contains information on electric double layer formation that has remained largely unexplored.

  12. Double layers and double wells in arbitrary degenerate plasmas

    Science.gov (United States)

    Akbari-Moghanjoughi, M.

    2016-06-01

    Using the generalized hydrodynamic model, the possibility of variety of large amplitude nonlinear excitations is examined in electron-ion plasma with arbitrary electron degeneracy considering also the ion temperature effect. A new energy-density relation is proposed for plasmas with arbitrary electron degeneracy which reduces to the classical Boltzmann and quantum Thomas-Fermi counterparts in the extreme limits. The pseudopotential method is employed to find the criteria for existence of nonlinear structures such as solitons, periodic nonlinear structures, and double-layers for different cases of adiabatic and isothermal ion fluids for a whole range of normalized electron chemical potential, η0, ranging from dilute classical to completely degenerate electron fluids. It is observed that there is a Mach-speed gap in which no large amplitude localized or periodic nonlinear excitations can propagate in the plasma under consideration. It is further revealed that the plasma under investigation supports propagation of double-wells and double-layers the chemical potential and Mach number ranges of which are studied in terms of other plasma parameters. The Mach number criteria for nonlinear waves are shown to significantly differ for cases of classical with η0 0 regimes. It is also shown that the localized structure propagation criteria possess significant dissimilarities for plasmas with adiabatic and isothermal ions. Current research may be generalized to study the nonlinear structures in plasma containing positrons, multiple ions with different charge states, and charged dust grains.

  13. Layered Double Hydroxide as Cordycepin Delivery Nanocarrier

    Institute of Scientific and Technical Information of China (English)

    Qin Zheng YANG; Jing YANG; Chang Kai ZHANG

    2006-01-01

    Layered double hydroxide was investigated as cordycepin delivery nanocarrier for the first time in this study. Negatively charged biomolecule-cordycepin was intercalated in the gallery spaces of [Mg-Al-NO3], which was confirmed by the results of X-ray diffraction and electrophoretic mobility. Cell experiment suggested that the new bio-LDH nanohybrid could prevent cordycepin decomposition by adenosine deaminase. This new formulation could possibly be used as a novel form cordycepin intravenous injection.

  14. Current-free double layers: A review

    Science.gov (United States)

    Singh, Nagendra

    2011-12-01

    During the last decade, there has been an upsurge in the research on current-free DLs (CFDLs). Research includes theory, laboratory measurements, and various applications of CFDLs ranging from plasma thrusters to acceleration of charged particles in space and astrophysical plasmas. The purpose of this review is to present a unified understanding of the basic plasma processes, which lead to the formation of CFDLs. The review starts with the discussion on early research on electric fields and double layers (DLs) and ion acceleration in planar plasma expansion. The review continues with the formation of DLs and rarefaction shocks (RFS) in expanding plasma with two electron populations with different temperatures. The basic theory mitigating the formation of a CFDL by two-electron temperature population is reviewed; we refer to such CFDLs as double layers structures formation by two-temperature electron populations (TET-CFDLs). Application of TET-CFDLS to ion acceleration in laboratory and space plasmas was discussed including the formation of stationary steady-state DLs. A quite different type of CFDLs forms in a helicon plasma device (HPD), in which plasma abruptly expands from a narrow plasma source tube into a wide diffusion tube with abruptly diverging magnetic fields. The formation mechanism of the CFDL in HPD, referred here as current free double layer structure in helicon plasma device (HPD-CFDL), and its applications are reviewed. The formation of a TET-CFDL is due to the self-consistent separation of the two electron populations parallel to the ambient magnetic field. In contrast, a HPD-CFDL forms due to self-consistent separation of electrons and ion perpendicular to the abruptly diverging magnetic field in conjunction with the conducting wall of the expansion chamber in the HPD. One-dimensional theoretical models of CFDLs based on steady-state solution of Vlasov-Poisson system of equations are briefly discussed. Applications of CFDLs ranging from helicon

  15. Polysulfide intercalated layered double hydroxides for metal capture applications

    Science.gov (United States)

    Kanatzidis, Mercouri G.; Ma, Shulan

    2017-04-04

    Polysulfide intercalated layered double hydroxides and methods for their use in vapor and liquid-phase metal capture applications are provided. The layered double hydroxides comprise a plurality of positively charged host layers of mixed metal hydroxides separated by interlayer spaces. Polysulfide anions are intercalated in the interlayer spaces.

  16. Polysulfide intercalated layered double hydroxides for metal capture applications

    Energy Technology Data Exchange (ETDEWEB)

    Kanatzidis, Mercouri G.; Ma, Shulan

    2017-04-04

    Polysulfide intercalated layered double hydroxides and methods for their use in vapor and liquid-phase metal capture applications are provided. The layered double hydroxides comprise a plurality of positively charged host layers of mixed metal hydroxides separated by interlayer spaces. Polysulfide anions are intercalated in the interlayer spaces.

  17. Wet Permeability Characteristics of Double-layer Knitted Fabrics

    Institute of Scientific and Technical Information of China (English)

    WANG Qi; XI Bai-jun

    2007-01-01

    In order to solve the problem that sweat flows back into the internal layer from the external layer in doublelayer knits, a fabric structure model is set up and the conditions that keep the sweat from flowing back into the internal layer from the external layer are presented. It can be used to improve the design of the double-layer knitstheoretically.

  18. Optical and Electrical Characteristics of Graphene Double Layer Formed by a Double Transfer of Graphene Single Layers.

    Science.gov (United States)

    Kim, Young Jun; Bae, Gi Yoon; Chun, Sungwoo; Park, Wanjun

    2016-03-01

    We demonstrate formation of double layer graphene by means of a double transfer using two single graphene layers grown by a chemical vapor deposition method. It is observed that shiftiness and broadness in the double-resonance of Raman scattering are much weaker than those of bilayer graphene formed naturally. Transport characteristics examined from transmission line measurements and field effect transistors show the similar behavior with those of single layer graphene. It indicates that interlayer separation, in electrical view, is large enough to avoid correlation between layers for the double layer structure. It is also observed from a transistor with the double layer graphene that molecules adsorpted on two inner graphene surfaces in the double layered structure are isolated and conserved from ambient environment.

  19. Double-Layer Systems at Zero Magnetic Field

    OpenAIRE

    ~Hanna, C. ~B.; Haas, Dylan; Diaz-Velez, J.C.

    2000-01-01

    We investigate theoretically the effects of intralayer and interlayer exchange in biased double-layer electron and hole systems, in the absence of a magnetic field. We use a variational Hartree-Fock-like approximation to analyze the effects of layer separation, layer density, tunneling, and applied gate voltages on the layer densities and on interlayer phase coherence. In agreement with earlier work, we find that for very small layer separations and low layer densities, an interlayer-correlat...

  20. The electric double layer in hydriding metals

    Directory of Open Access Journals (Sweden)

    K. Jamroziak

    2008-12-01

    Full Text Available Purpose: The effect of penetration hydrogen into fatigue load metals is widely investigated by many researchers.Hydrogen is the chemical element which plays negative role in fatigue durability of structures. It decides on fatiguebrittle cracking. In the paper authors carry out an analysis of fatigue durability. Making use of naturally coming intoexistence the electric double layer phenomenon authors discussed the model of absorbing hydrogen into fatigue gap.Design/methodology/approach: A proposed model of the mechanism of hydrogen absorption by metal wasbased on particle hydrogen and water vapor from the air.Findings: It assumes that the EDL has crucial role in intercepting of polar dipole particles of hydrogenand water’s vapor, especially in an already formed fatigue micro-gaps and gaps by effects of its electrostaticattraction force. The authors assume that the main source of hydrogen is water’s vapor, and number of hydrogendipoles is negligible.Practical implications: The problems of metals’ fragility/durability were also discussed in other papersin which author mainly tried to develop new methods of materials’ production with the consideration of assumedfatigue durability.Originality/value: Currently, in progress are works on proposing a model for hydrogen absorption by metal.Such approach to optimization in production and development of the new technologies is an essence of modernconstructions that work in all variety of mechanical stress conditions.

  1. Double-layered Aurivillius-type ferroelectrics with magnetic moments

    NARCIS (Netherlands)

    Missyul, A. B.; Zvereva, I. A.; Palstra, T. T. M.; Kurbakov, A. I.

    2010-01-01

    We have synthesized the double-layer Aurivillius phase Bi(2)LnNbTiO(9) where Ln = Nd-Gd, Bi. All compounds adopt the orthorhombic polar space group A2(I)am. The magnetic Ln-ion occupies the cuboctahedral position in the middle of the perovskite double-layer, and thus controls the octahedral tilt of

  2. Layered double hydroxide stability. 1. Relative stabilities of layered double hydroxides and their simple counterparts

    Science.gov (United States)

    Boclair, J. W.; Braterman, P. S.

    1999-01-01

    Solutions containing di- and trivalent metal chlorides [M(II) = Mg2+, Zn2+, Co2+, Ni2+, Mn2+; M(III) = Al3+, Fe3+] were titrated with NaOH to yield hydrotalcite-like layered double hydroxides (LDH), [[M(II)]1-x[M(III)]x(OH)2][Cl]x yH2O, by way of M(III) hydroxide/hydrous oxide intermediates. Analysis of the resultant titration curves yields nominal solubility constants for the LDH. The corresponding LDH stabilities are in the order Mg hydroxides/hydrous oxides is discussed.

  3. Superior coagulation of graphene oxides on nanoscale layered double hydroxides and layered double oxides.

    Science.gov (United States)

    Zou, Yidong; Wang, Xiangxue; Chen, Zhongshan; Yao, Wen; Ai, Yuejie; Liu, Yunhai; Hayat, Tasawar; Alsaedi, Ahmed; Alharbi, Njud S; Wang, Xiangke

    2016-12-01

    With the development and application of graphene oxides (GO), the potential toxicity and environmental behavior of GO has become one of the most forefront environmental problems. Herein, a novel nanoscale layered double hydroxides (glycerinum-modified nanocrystallined Mg/Al layered double hydroxides, LDH-Gl), layered double oxides (calcined LDH-Gl, LDO-Gl) and metallic oxide (TiO2) were synthesized and applied as superior coagulants for the efficient removal of GO from aqueous solutions. Coagulation of GO as a function of coagulant contents, pH, ionic strength, GO contents, temperature and co-existing ions were studied and compared, and the results showed that the maximum coagulation capacities of GO were LDO-Gl (448.3 mg g(-1)) > TiO2 (365.7 mg g(-1)) > LDH-Gl (339.1 mg g(-1)) at pH 5.5, which were significantly higher than those of bentonite, Al2O3, CaCl2 or other natural materials due to their stronger reaction active and interfacial effect. The presence of SO3(2-) and HCO3(-) inhibited the coagulation of GO on LDH-Gl and LDO-Gl significantly, while other cations (K(+), Mg(2+), Ca(2+), Ni(2+), Al(3+)) or anion (Cl(-)) had slightly effect on GO coagulation. The interaction mechanism of GO coagulation on LDO-Gl and TiO2 might due to the electrostatic interactions and strong surface complexation, while the main driving force of GO coagulation on LDH-Gl might be attributed to electrostatic interaction and hydrogen bond, which were further evidenced by TEM, SEM, FT-IR and XRD analysis. The results of natural environmental simulation showed that LDO-Gl, TiO2 or other kinds of natural metallic oxides could be superior coagulants for the efficient elimination of GO or other toxic nanomaterials from aqueous solutions in real environmental pollution cleanup.

  4. Surface-plasmons lasing in double-graphene-layer structures

    Energy Technology Data Exchange (ETDEWEB)

    Dubinov, A. A. [Research Institute for Electrical Communication, Tohoku University, Sendai 980-8577 (Japan); Institute for Physics of Microstructures of Russian Academy of Sciences, and Lobachevsky State University of Nizhny Novgorod, Nizhny Novgorod 603950 (Russian Federation); Aleshkin, V. Ya. [Institute for Physics of Microstructures of Russian Academy of Sciences, and Lobachevsky State University of Nizhny Novgorod, Nizhny Novgorod 603950 (Russian Federation); Ryzhii, V. [Research Institute for Electrical Communication, Tohoku University, Sendai 980-8577 (Japan); Center for Photonics and Infrared Engineering, Bauman Moscow State Technical University, Moscow 105005 (Russian Federation); Shur, M. S. [Department of Electrical, Electronics, and System Engineering, Rensselaer Polytechnic Institute, Troy, New York 12180 (United States); Otsuji, T. [Research Institute for Electrical Communication, Tohoku University, Sendai 980-8577 (Japan)

    2014-01-28

    We consider the concept of injection terahertz lasers based on double-graphene-layer (double-GL) structures with metal surface-plasmon waveguide and study the conditions of their operation. The laser under consideration exploits the resonant radiative transitions between GLs. This enables the double-GL laser room temperature operation and the possibility of voltage tuning of the emission spectrum. We compare the characteristics of the double-GL lasers with the metal surface-plasmon waveguides with those of such laser with the metal-metal waveguides.

  5. Single and Double-Layer Antireflection Coatings on Silicon

    Science.gov (United States)

    Kavakli, Ýpek Gýrgýn; Kantarli, Kayhan

    2002-09-01

    In this study, the effect of single and double-layer thin film coatings on the reflectance spectrum of silicon surfaces has been investigated. Thin film coatings have been prepared by vacuum evaporation of the materials with suitable refractive index. Reflectance measurements in the visible and near infrared have shown that the coated samples acquire antireflection properties. Thickness and wavelength dependence of the antireflection properties of SiO, CeO2 and ZnS single-layer coatings with optical thickness of one quarter wavelength has been studied. In double-layer coatings, a thin film of SiO, CeO2 and ZnS with optical thickness of quarter wavelength were used as inner layer while a thin film of MgF2 with equal optical thickness was used as outer layer. It was shown that double-layer coatings can produce a significantly broader low reflectance region than does the single-layer coating. The results have been discussed by considering the zero reflectance conditions for the refractive index and the optical thickness of layers.

  6. FMR measurements on CoCr/NiFe double layers

    OpenAIRE

    Stam, M.T.H.C.W.; Gerritsma, G.J.; Lodder, J. C.; Popma, Th.J.A.

    1988-01-01

    CoCr/NiFe double layers were measured by ferromagnetic resonance (FMR) for different angles of the applied field. Several resonance curves were observed for CoCr, which are attributed to the different layers of a magnetically stratified CoCr. This was investigated by carrying out FMR measurements on a single CoCr sample and removing successive layers by ion beam milling. The origin of some of the curves is still unclear. One resonance curve is attributed to the top or bulk layer and another t...

  7. USING COLLOIDAL LAYERED DOUBLE HYDROXIDES AS CATIONIC MICROPARTICULATE COMPONENT

    Institute of Scientific and Technical Information of China (English)

    Songlin Wang; Wenxia Liu

    2004-01-01

    Layered double hydroxides consisting of layers with cationic charges may be potential candidates of cationic microparticles forming synergetic retention effect with anionic polyacrylamide. In this work, the layered double hydroxides with various molar ratios of Mg/Al were synthesized by co-precipitation of magnesium chloride and aluminum chloride and peptized by intense washing with water. The chemical formula, particle size, Zeta potential of the layered double hydroxide were analyzed. It was found that positively charged magnesium aluminum hydroxide with particle diameter in nanoparticle size could be prepared. The Zeta potential and particle size vary with the feed molar ratio of Mg/Al and the peptizing process, respectively. The Zeta potential is also pH dependent. The retention experiments carried out on DDJ show that when used together with anionic polyacrylamide, the positively charged colloidal double hydroxide greatly improves the retention of reed pulps. The chemical formula, particle size and Zeta potential of the colloidal double hydroxide all affect its retention behavior.

  8. Double layer -- a particle accelerator in the magnetosphere

    Energy Technology Data Exchange (ETDEWEB)

    Fu, Xiangrong [Los Alamos National Laboratory

    2015-07-16

    Slides present the material under the following topics: Introduction (What is a double layer (DL)? Why is it important? Key unsolved problems); Theory -- time-independent solutions of 1D Vlasov--Poisson system; Particle-in-cell simulations (Current-driven DLs); and Electron acceleration by DL (Betatron acceleration). Key problems include the generation mechanism, stability, and electron acceleration. In summary, recent observations by Van Allen Probes show large number of DLs in the outer radiation belt, associated with enhanced flux of relativistic electrons. Simulations show that ion acoustic double layers can be generated by field-aligned currents. Thermal electrons can gain energy via betatron acceleration in a dipole magnetic field.

  9. Electric double layer of anisotropic dielectric colloids under electric fields

    Science.gov (United States)

    Han, M.; Wu, H.; Luijten, E.

    2016-07-01

    Anisotropic colloidal particles constitute an important class of building blocks for self-assembly directed by electrical fields. The aggregation of these building blocks is driven by induced dipole moments, which arise from an interplay between dielectric effects and the electric double layer. For particles that are anisotropic in shape, charge distribution, and dielectric properties, calculation of the electric double layer requires coupling of the ionic dynamics to a Poisson solver. We apply recently proposed methods to solve this problem for experimentally employed colloids in static and time-dependent electric fields. This allows us to predict the effects of field strength and frequency on the colloidal properties.

  10. Theory of current-free double layers in plasmas

    Science.gov (United States)

    Goswami, K. S.; Saharia, K.; Schamel, H.

    2008-06-01

    The existence of current-free double layers in unmagnetized plasma is studied by means of the quasipotential method applied to the Vlasov-Poisson system. Crucial for its existence are trapped particle populations that are characterized by notches (dips) in the velocity distribution functions at resonant velocity becoming flat at large amplitude limit. The potential drop across the double layer, or its amplitude ψ, can be arbitrarily strong covering the whole range 0pressures. It is, hence, the effective electron (ion) temperature increase (decrease) with increasing potential, caused by the trapped particles, which is responsible for the existence of this two-parameter family of solutions.

  11. Insights from theory and simulation on the electrical double layer.

    Science.gov (United States)

    Henderson, Douglas; Boda, Dezso

    2009-05-28

    Despite the fact that our conceptual understanding of the electrical double layer has advanced during the past few decades, the interpretation of experimental and applied work is still largely based on the venerable Poisson-Boltzmann theory of Gouy, Chapman and Stern. This is understandable since this theory is simple and analytic. However, it is not very accurate because the atomic/molecular nature of the ions/solvent and their correlations are ignored. Simulation and some theoretical studies by ourselves and others that have advanced our understanding are discussed. These studies show that the GCS theory predicts a narrow double layer with monotonic profiles. This is not correct. The double layer is wider, and there can be substantial layering that would be even more pronounced if explicit solvent molecules are considered. For many years, experimental studies of the double layer have been directed to the use of electrochemistry as an analytical tool. This is acceptable for analytic chemistry studies. However, the understanding of electrochemical reactions that typically occur at the electrode surface, where simulation and theory indicate that the GCS theory can have substantial errors, requires modern approaches. New, fundamental experimental studies that would lead to deeper insights using more novel systems would be desirable. Further, biophysics is an interesting field. Recent studies of the selectivity of ion channels and of the adsorption of ions in a binding sites of a protein have shown that the linearized GCS theory has substantial errors.

  12. Double-layered cell transfer technology for bone regeneration.

    Science.gov (United States)

    Akazawa, Keiko; Iwasaki, Kengo; Nagata, Mizuki; Yokoyama, Naoki; Ayame, Hirohito; Yamaki, Kazumasa; Tanaka, Yuichi; Honda, Izumi; Morioka, Chikako; Kimura, Tsuyoshi; Komaki, Motohiro; Kishida, Akio; Izumi, Yuichi; Morita, Ikuo

    2016-09-14

    For cell-based medicine, to mimic in vivo cellular localization, various tissue engineering approaches have been studied to obtain a desirable arrangement of cells on scaffold materials. We have developed a novel method of cell manipulation called "cell transfer technology", enabling the transfer of cultured cells onto scaffold materials, and controlling cell topology. Here we show that using this technique, two different cell types can be transferred onto a scaffold surface as stable double layers or in patterned arrangements. Various combinations of adherent cells were transferred to a scaffold, amniotic membrane, in overlapping bilayers (double-layered cell transfer), and transferred cells showed stability upon deformations of the material including folding and trimming. Transplantation of mesenchymal stem cells from periodontal ligaments (PDLSC) and osteoblasts, using double-layered cell transfer significantly enhanced bone formation, when compared to single cell type transplantation. Our findings suggest that this double-layer cell transfer is useful to produce a cell transplantation material that can bear two cell layers. Moreover, the transplantation of an amniotic membrane with PDLSCs/osteoblasts by cell transfer technology has therapeutic potential for bone defects. We conclude that cell transfer technology provides a novel and unique cell transplantation method for bone regeneration.

  13. Influence of window layer thickness on double layer antirefiection coating for triple junction solar cells*

    Institute of Scientific and Technical Information of China (English)

    Wang Lijuan; Zhan Feng; Yu Ying; Zhu Yan; Liu Shaoqing; Huang Shesong; Ni Haiqiao; Niu Zhichuan

    2011-01-01

    The optimization of a SiO2/TiO2, SiO2/ZnS double layer antireflection coating (ARC) on Ga0.5ln0.5P/ln0.02Ga0.98As/Ge solar cells for terrestrial application is discussed. The Al0.5In0.5P window layer thickness is also taken into consideration. It is shown that the optimal parameters of double layer ARC vary with the thickness of the window layer.

  14. The electric double layer has a life of its own

    CERN Document Server

    Merlet, Céline; Salanne, Mathieu; Van Roij, René; Madden, Paul A; Chandler, David; Rotenberg, Benjamin

    2014-01-01

    Using molecular dynamics simulations with recently developed importance sampling methods, we show that the differential capacitance of a model ionic liquid based double-layer capacitor exhibits an anomalous dependence on the applied electrical potential. Such behavior is qualitatively incompatible with standard mean-field theories of the electrical double layer, but is consistent with observations made in experiment. The anomalous response results from structural changes induced in the interfacial region of the ionic liquid as it develops a charge density to screen the charge induced on the electrode surface. These structural changes are strongly influenced by the out-of-plane layering of the electrolyte and are multifaceted, including an abrupt local ordering of the ions adsorbed in the plane of the electrode surface, reorientation of molecular ions, and the spontaneous exchange of ions between different layers of the electrolyte close to the electrode surface. The local ordering exhibits signatures of a fir...

  15. Damping of double wall panels including a viscothermal air layer

    NARCIS (Netherlands)

    Basten, T.G.H.; Stainhaouer, G.; Bakamidis, S.; Charalabopoulou, F.

    2001-01-01

    This paper deals with the dynamic behaviour of double wall panels, with emphasis on damping and sound radiation. It will be shown that a narrow air layer separating the two plates of a panel significantly alters the mentioned quantities by its viscothermal properties. Numerical and experimental resu

  16. Modeling Electric Double-Layers Including Chemical Reaction Effects

    DEFF Research Database (Denmark)

    Paz-Garcia, Juan Manuel; Johannesson, Björn; Ottosen, Lisbeth M.

    2014-01-01

    A physicochemical and numerical model for the transient formation of an electric double-layer between an electrolyte and a chemically-active flat surface is presented, based on a finite elements integration of the nonlinear Nernst-Planck-Poisson model including chemical reactions. The model works...

  17. Electric Double-Layer Capacitors Applying to Voltage Sag Compensator

    Science.gov (United States)

    Nara, Hidetaka

    Recently the electric double-layer capacitor (EDLC) which is rapidly charged and discharged and offers long life, maintenance-free, has been developed as a new energy storage element. Therefore, we developed the uninterruptible power supply as voltage sag compensator utilizing EDLC. This paper describes an abstract of EDLC and applying to voltage sag compensation.

  18. Recent progress in polymer/layered double hydroxide nanocomposites

    Institute of Scientific and Technical Information of China (English)

    DING Peng; CHEN Wei; QU Baojun

    2006-01-01

    New developments in the studies of nanocomposites based on polymer matrixes and layered double hydroxides (LDHs)in recent years are reviewed combining our relative research work, among which the synthesis techniques, the physicochemical characterizations, and the improved material properties are especially discussed. The possible application of polymer/LDH nanocomposites is also proposed.

  19. The electric double layer has a life of its own

    NARCIS (Netherlands)

    Merlet, Céline; Limmer, David T.; Salanne, Mathieu; Van Roij, René; Madden, Paul A.; Chandler, David; Rotenberg, Benjamin

    2014-01-01

    Using molecular dynamics simulations with recently developed importance sampling methods, we show that the differential capacitance of a model ionic liquid based double-layer capacitor exhibits an anomalous dependence on the applied electrical potential. Such behavior is qualitatively incompatible w

  20. USING COLLOIDAL LAYERED DOUBLE HYDROXIDES AS CATIONICMICROPARTICULATE COMPONENT

    Institute of Scientific and Technical Information of China (English)

    SonglinWang; WenxiaLiu

    2004-01-01

    Layered double hydroxides consisting of layers withcationic charges may be potential candidates ofcationic microparticles forming synergetic retentioneffect with anionic polyacrylamide. In this work, thelayered double hydroxides with various molar ratiosof Mg/AI were synthesized by co-precipitation ofmagnesium chloride and aluminum chloride and pep-tized by intense washing with water. The chemicalformula, particle size, Zeta potential of the layereddouble hydroxide were analyzed. It was found thatpositively charged magnesium aluminum hydroxidewith particle diameter in nanoparticle size could beprepared. The Zeta potential and particle size varywith the feed molar ratio of Mg/A1 and the peptizingprocess, respectively. The Zeta potential is also pHdependent. The retention experiments carried out onDDJ show that when used together with anionic poly-acrylamide, the positively charged colloidal doublehydroxide greatly improves the retention of reedpulps. The chemical formula, particle size and Zetapotential of the colloidal double hydroxide all affectits retention behavior.

  1. Electric-double-layer potential distribution in multiple-layer immiscible electrolytes

    NARCIS (Netherlands)

    Das, Siddhartha; Hardt, Steffen

    2011-01-01

    In this Brief Report, we calculate the electric-double-layer (EDL) electrostatic potential in a system of several layers of immiscible electrolytes. Verwey-Niessen theory predicts that at the interface between two immiscible electrolytes back-to-back EDLs are formed. The present analysis extends thi

  2. Synthesis of Layered Double Hydroxide Single-Layer Nanosheets in Formamide.

    Science.gov (United States)

    Yu, Jingfang; Liu, Jingjing; Clearfield, Abraham; Sims, Johnathan E; Speiegle, Michael T; Suib, Steven L; Sun, Luyi

    2016-11-21

    Layered double hydroxide (LDH) single-layer nanosheets were synthesized through a single-step process in the presence of formamide. This one-step process is simple, fast, and efficient and thus is potentially viable for large-scale production. Two key factors for the growth of LDH single-layer nanosheets, formamide concentration and LDH layer charge, were investigated thoroughly. A higher formamide concentration and a higher LDH layer charge are favorable for the growth of LDH single-layer nanosheets. The LDH single-layer nanosheets obtained at the premium formamide concentration and LDH layer charge were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and atomic force micrscopy (AFM). Poly(vinyl alcohol) (PVA)/LDH nanocomposite coatings were also prepared. The coated polyethylene terephthalate (PET) and poly(lactic acid) (PLA) films exhibited significantly improved oxygen gas barrier properties thanks to the well-dispersed and -aligned LDH single-layer nanosheets in the coating.

  3. Deep Penetration of Spudcan Foundation into Double Layered Soils

    Institute of Scientific and Technical Information of China (English)

    LIU Jun; HU Yu-xia; KONG Xian-jing

    2005-01-01

    The spudcan foundation has been widely used in offshore engineering for jack-up rigs. However, "punch through"failure often occurs where a stronger soil layer overlays a softer soil layer. In this study, spudcan penetration into double layered soils is investigated numerically. The soil profile is set up as a stronger soil layer overlaying a softer soil layer,with the soil strength ratio ( bottom soil strength / top soil strength) varied from 0.1 to 1.0 ( 1 means uniform soil). The bearing behaviour is discussed and the bearing capacity factors are given for various cases involving different layer thicknesses and different strength ratios of the two clay layers. The development of the plastic zones and the effect of soil selfweight on the bearing capacity are also discussed. From this study, it is found that, when a spudcan is distant from the soil layer boundary, the spudcan can be analysed with single soil layer data. However, when a spudcan becomes closer to the soil boundary layer, the influence of the lower soft soil layer is significant, and the bearing capacity of the spudcan decreases. The critical distance is an indication of the occurrence of "punch through" failure. The critical distance between the spudcan and the layer boundary is larger for a rough spudcan than the one for a smooth one, and the critical distance decreases with increasing soil strength ratio. The depth of cavity formed during initial spudcan penetration depends on the top layer soil strength, soil strength ratio and unit soil self-weight, and the cavity affects the spudcan bearing behaviour as well.

  4. Shear deformation plate continua of large double layered space structures

    Science.gov (United States)

    Hefzy, Mohamed Samir; Nayfeh, Adnan H.

    1986-01-01

    A simple method is presented to model large rigid-jointed lattice structures as continuous elastic media with couple stresses using energy equivalence. In the analysis, the transition from the discrete system to the continuous media is achieved by expanding the displacements and the rotations of the nodal points in a Taylor series about a suitable chosen origin. The strain energy of the continuous media with couple stresses is then specialized to obtain shear deformation plate continua. Equivalent continua for single layered grids, double layered grids, and three-dimensional lattices are then obtained.

  5. Immobilization of laccase on hybrid layered double hydroxide

    Directory of Open Access Journals (Sweden)

    David Isidoro Camacho Córdova

    2009-01-01

    Full Text Available Crystals of Mg/Al layered double hydroxide were synthesized by alkaline precipitation and treated in an aqueous solution of glutamic acid. The glutamate ions were not intercalated into the interlayer space, but were detected in the material by Fourier transform infrared spectroscopy, suggesting that only the external surfaces of crystals were modified with glutamate ions. The resulting hybrid material was tested as a support for immobilization of the enzyme laccase (Myceliophthora thermophila. The immobilized enzyme preparation was characterized by electronic paramagnetic resonance spectroscopy and by assays of catalytic activity. The activity of the immobilized laccase was 97% of the activity in the free enzyme. Layered double hydroxide is a suitable support for use in remediation of soil studies.

  6. Double layers in a modestly collisional electronegative discharge

    CERN Document Server

    Sheridan, T E

    1999-01-01

    The effect of ion-neutral collisions on the structure and ion flux emanating from a steady-state, planar discharge with two negative components is investigated. The positive ion component is modelled as a cold fluid subject to constant-mobility collisions, while the electrons and negative ions obey Boltzmann relations. The model includes the collisionless limit. When the negative ions are sufficiently cold three types of discharge structures are found. For small negative ion concentrations or high collisionality, the discharge is 'stratified', with an electronegative core and an electropositive edge. For the opposite conditions, the discharge is 'uniform' with the negative ion density remaining significant at the edge of the plasma. Between these cases lies the special case of a double-layer-stratified discharge, where quasi-neutrality is violated at the edge of the electronegative core. Double-layer-stratified solutions are robust in that they persist for moderate collisionality. Numerical solutions for fini...

  7. Superconductivity in Electric Double Layer Capacitor under Pressure

    Science.gov (United States)

    McCann, Duncan; Misek, Martin; Kamenev, Konstantin; Huxley, Andrew

    2015-03-01

    Chemical doping generally provides the most common method for tuning into the superconducting state of a material yet can be difficult to control and also potentially introduces structural disorder complicating the underlying physics. Electric Double Layer devices however provide a means to electrostatically dope materials with high electric fields allowing continuous tuning of a 2D superconducting state thus avoiding such issues. One such device is the Electric Double Layer Capacitor which can detect the onset of superconductivity through AC magnetisation measurements. We make use of a similar device in an attempt to electrostatically dope and tune the superconductivity in the cuprate compound La1.93Sr0.07CuO4 as well as investigating whether application of pressure improves its efficiency.

  8. Electrical power generation by mechanically modulating electrical double layers.

    Science.gov (United States)

    Moon, Jong Kyun; Jeong, Jaeki; Lee, Dongyun; Pak, Hyuk Kyu

    2013-01-01

    Since Michael Faraday and Joseph Henry made their great discovery of electromagnetic induction, there have been continuous developments in electrical power generation. Most people today get electricity from thermal, hydroelectric, or nuclear power generation systems, which use this electromagnetic induction phenomenon. Here we propose a new method for electrical power generation, without using electromagnetic induction, by mechanically modulating the electrical double layers at the interfacial areas of a water bridge between two conducting plates. We find that when the height of the water bridge is mechanically modulated, the electrical double layer capacitors formed on the two interfacial areas are continuously charged and discharged at different phases from each other, thus generating an AC electric current across the plates. We use a resistor-capacitor circuit model to explain the results of this experiment. This observation could be useful for constructing a micro-fluidic power generation system in the near future.

  9. Experimental investigation of current free double layers in helicon plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Sahu, B. B. [Department of Applied Sciences and Humanities, Dronacharya College of Engineering, Gurgaon 123506 (India); Tarey, R. D. [Department of Physics, Indian Institute of Technology, New Delhi 110016 (India); Ganguli, A. [Centre for Energy Studies, Indian Institute of Technology, New Delhi 110016 (India)

    2014-02-15

    The paper presents investigations of current free double layer (CFDL) that forms in helicon plasmas. In contrast to the other work reporting on the same subject, in the present investigations the double layer (DL) forms in a mirror-like magnetic field topology. The RF compensated Langmuir probe measurements show multiple DLs, which are in connection with, the abrupt fall of densities along with potential drop of about 24 V and 18 V. The DLs strengths (e ΔV{sub p})/(k T{sub e}) are about 9.5 and 6, and the corresponding widths are about 6 and 5 D lengths. The potential drop is nearly equal to the thermal anisotropies between the two plasma regions forming the DL, which is present in the plateau region of mirror, unlike the earlier studies on the DL formation in the region of strong gradients in the magnetic field. Also, it presents a qualitative discussion on the mechanism of DL formation.

  10. Hydrothermal Synthesis of Ni/Al Layered Double Hydroxide Nanorods

    OpenAIRE

    Yun Zhao; Fenfei Xiao; Qingze Jiao

    2011-01-01

    Ni/Al layered double hydroxide (LDH) nanorods were successfully synthesized by the hydrothermal reaction. The crystal structure of the products was characterized by X-ray diffraction (XRD). The morphology of the products was observed using transmission electron microscopy (TEM) and field emission scanning electron microscopy (SEM). The influences of reaction time and pH value on the morphology of the Ni/Al LDHs were investigated. The result showed that the well-crystallized nanorods of Ni/Al ...

  11. Carrier relaxation time divergence in single and double layer cuprates

    Science.gov (United States)

    Schneider, M. L.; Rast, S.; Onellion, M.; Demsar, J.; Taylor, A. J.; Glinka, Y.; Tolk, N. H.; Ren, Y. H.; Lüpke, G.; Klimov, A.; Xu, Y.; Sobolewski, R.; Si, W.; Zeng, X. H.; Soukiassian, A.; Xi, X. X.; Abrecht, M.; Ariosa, D.; Pavuna, D.; Krapf, A.; Manzke, R.; Printz, J. O.; Williamsen, M. S.; Downum, K. E.; Guptasarma, P.; Bozovic, I.

    2003-12-01

    We report the transient optical pump-probe reflectivity measurements on single and double layer cuprate single crystals and thin films of ten different stoichiometries. We find that with sufficiently low fluence the relaxation time (tauR) of all samples exhibits a power law divergence with temperature (T): tauR ∝ T^{-3 ± 0.5}. Further, the divergence has an onset temperature above the superconducting transition temperature for all superconducting samples. Possible causes of this divergence are discussed.

  12. Electrostatic supersolitons and double layers at the acoustic speed

    Energy Technology Data Exchange (ETDEWEB)

    Verheest, Frank, E-mail: frank.verheest@ugent.be [Sterrenkundig Observatorium, Universiteit Gent, Krijgslaan 281, B–9000 Gent (Belgium); School of Chemistry and Physics, University of KwaZulu-Natal, Durban 4000 (South Africa); Hellberg, Manfred A., E-mail: hellberg@ukzn.ac.za [School of Chemistry and Physics, University of KwaZulu-Natal, Durban 4000 (South Africa)

    2015-01-15

    Supersolitons are characterized by subsidiary extrema on the sides of a typical bipolar electric field signature or by association with a root beyond double layers in the fully nonlinear Sagdeev pseudopotential description. It has been proven that supersolitons may exist in several plasmas having at least three constituent species, but they cannot be found in weakly nonlinear theory. Another recent aspect of pseudopotential theory is that in certain plasma models and parameter regimes solitons and/or double layers can exist at the acoustic speed, having no reductive perturbation counterparts. Importantly, they signal coexistence between solitons having positive and negative polarity, in that one solution can be realized at a time, depending on infinitesimal perturbations from the equilibrium state. Weaving the two strands together, we demonstrate here that one can even find supersolitons and double layers at the acoustic speed, as illustrated using the model of cold positive and negative ions, in the presence of nonthermal electrons following a Cairns distribution. This model has been discussed before, but the existence and properties of supersolitons at the acoustic speed were not established at the time of publication.

  13. Intercalation of Layered Silicates, Layered Double Hydroxides, and Lead Iodide: Synthesis, Characterization and Properties.

    Science.gov (United States)

    Mehrotra, Vivek

    Layered silicates, layered double hydroxides, and lead iodide are lamellar solids that can incorporate guest species into the galleries between their layers. Various intercalated forms of these layered materials have been synthesized and their properties studied. The dielectric behavior of pristine fluorohectorite, a typical layered silicate, and Zn-Al layered double hydroxide is explained by considering the structural ordering and mobility of the intercalated water molecules, as well as models invoking fractal time processes and fractal structure. Intercalative polymerization of aniline and pyrrole into fluorohectorite leads to a multilayered structure consisting of single polymer chains alternately stacked with the 9.6 A thick silicate layers. The polymer chains are confined to the quasi two-dimensional interlayer space between the rigid host layers. The hybrid films exhibit highly anisotropic properties. The optical, electrical and mechanical behavior is discussed in terms of the molecular confinement of the polymer chains. Ethylenediamine functionalized C _{60} clusters have also been intercalated into fluorohectorite via an ion-exchange procedure. Intercalation results in an improved thermal stability of the functionalized C_{60} clusters. Rutherford backscattering spectrometry has been used to elucidate the mechanism of intercalative ion exchange of silver in muscovite mica, a layered silicate with a layer charge density of 2e per unit cell. It is proposed that ion-exchange progresses by intercalating successive galleries through the edges of the mica layers. Guest-host interactions have been studied in the system aniline-PbI_2. The optical and structural effects of aniline intercalation in lead iodide thin films is discussed. Intercalation leads to a large shift in the optical band gap of PbI_2. The observed change in band gap is not only due to the increased separation between the PbI_2 layers but also because of an electrostatic interaction between the

  14. Transport measurements on individual CuO 2 double layers

    Science.gov (United States)

    Mößle, M.; Kleiner, R.; Gatt, R.; Onellion, M.; Müller, P.

    2000-11-01

    Oxygen loss at the surface of Bi 2Sr 2CaCu 2O 8+ x single crystals provides CuO 2 layers with different critical temperatures. Particularly for overdoped crystals this allows to achieve a T c maximum near the surface. We performed transport measurements of this oxygen depleted layer. Samples were prepared by evaporating four Pb or Ag electrodes on top of freshly cleaved Bi 2Sr 2CaCu 2O 8+ x single crystals. Using overdoped crystals with a bulk T c of 55 to 60 K, the outermost layer was found to be underdoped with T c down to 30 K while the adjacent one was near optimal doping with T c between 80 and 90 K. The T c of the third layer was close to the bulk value. For temperatures above the bulk T c often only one CuO 2 double layer was found to be superconducting. We discuss current transport measurements with current flow along the CuO 2 layers.

  15. Large-amplitude double layers in a dusty plasma with an arbitrary streaming ion beam

    Indian Academy of Sciences (India)

    Brindaban Das; Debkumar Ghosh; Prasanta Chatterjee

    2010-06-01

    Formation of large-amplitude double layers in a dusty plasma whose constituents are electrons, ions, warm dust grains and positive ion beam are studied using Sagdeev’s pseudopotential technique. Existence of double layers is investigated. It is found that both the temperature of dust particles and ion beam temperature play significant roles in determining the region of the existence of double layers.

  16. Small amplitude ion-acoustic double layers with cold electron beam and q-nonextensive electrons

    Energy Technology Data Exchange (ETDEWEB)

    Ali Shan, S., E-mail: shaukatshan@gmail.com [Theoretical Plasma Physics Division, PINSTECH, Nilore, 44000 Islamabad (Pakistan); National Centre for Physics (NCP), Shahdra Valley Road, 44000 Islamabad (Pakistan); Department of Mathematics and Applied Physics (DPAM), PIEAS, Islamabad (Pakistan); Saleem, H., E-mail: saleemhpk@hotmail.com [National Centre for Physics (NCP), Shahdra Valley Road, 44000 Islamabad (Pakistan); Department of Mathematics and Applied Physics (DPAM), PIEAS, Islamabad (Pakistan)

    2014-02-01

    Small amplitude ion-acoustic double layers in an unmagnetized and collisionless plasma consisting of cold positive ions, q-nonextensive electrons, and a cold electron beam are investigated. Small amplitude double layer solution is obtained by expanding the Sagdeev potential truncated method. The effects of entropic index q, speed and density of cold electron beam on double layer structures are discussed.

  17. Cation ordering and superstructures in natural layered double hydroxides.

    Science.gov (United States)

    Krivovichev, Sergey V; Yakovenchuk, Victor N; Zolotarev, Andrey A; Ivanyuk, Gregory N; Pakhomovsky, Yakov A

    2010-01-01

    Layered double hydroxides (LDHs) constitute an important group of materials with many applications ranging from catalysis and absorption to carriers for drug delivery, DNA intercalation and carbon dioxide sequestration. The structures of LDHs are based upon double brucite-like hydroxide layers [M(2+)(n)M(3+)(m)(OH)(2(m+n)](m+), where M(2+) = Mg(2+), Fe(2+), Mn(2+), Zn(2+), etc.; M(3+) = Al(3+), Fe(3+), Cr(3+), Mn(3+), etc. Structural features of LDHs such as cation ordering, charge distribution and polytypism have an immediate influence upon their properties. However, all the structural studies on synthetic LDHs deal with powder samples that prevent elucidation of such fine details of structure architecture as formation of superstructures due to cation ordering. In contrast to synthetic materials, natural LDHs are known to form single crystals accessible to single-crystal X-ray diffraction analysis, which provides a unique possibility to investigate 3D cation ordering in LDHs that results in formation of complex superstructures, where 2D cation order is combined with a specific order of layer stacking (polytypism). Therefore LDH minerals provide an indispensable source of structural information for modeling of structures and processes happening in LDHs at the molecular and nanoscale levels.

  18. Near infrared organic photodetector utilizing a double electron blocking layer.

    Science.gov (United States)

    Shafian, Shafidah; Hwang, Heewon; Kim, Kyungkon

    2016-10-31

    A near infrared organic photodiode (OPD) utilizing a double electron blocking layer (EBL) fabricated by the sequential deposition of molybdenum (VI) oxide (MoO3) and poly(3,4ethylenedioxythiophene):poly(styrene-sulfonate) (PEDOT:PSS) is reported. The double EBL improves the on/off current ratio of OPD up to 1.36 x 104 at -1V, which is one order of magnitude higher than PEDOT:PSS single EBL (2.45 x 103) and three orders of magnitude higher than that of MoO3 single EBL (7.86). The detectivity at near infrared (800 nm) at -1V is 4.90 x 1011 Jones, which is 2.83 times higher than the PEDOT:PSS single EBL and 2 magnitudes higher compared to the MoO3 single EBL.

  19. Cellular Uptake Behavior of Fluorescein: Intercalated Layered Double Hydroxide

    Science.gov (United States)

    Tanaka, Miyuki; Aisawa, Sumio; Hirahara, Hidetoshi; Narita, Eiichi; Yin, Shu; Sato, Tsugio

    2012-06-01

    In order to define the ability of layered double hydroxide (LDH) as materials for drug delivery, fluorescein (Fluo) anion intercalated LDH (Fluo/LDH) was synthesized by hydrothermal treatment and observed the cellular uptake of the Fluo/LDH for mammalian cell (L929). The synthesized Fluo/LDH showed a LDH structure, high fluorescence and low cytotoxicity. According to the fluorescence, confocal and TEM images of cells, the Fluo/LDH seemed to be internalized into the L929 cell by cellular endocytosis and dissolved inside the cell to exhibit the fluorescence of cellular cytoplasm.

  20. Oxidative leaching of chromium from layered double hydroxides: Mechanistic studies

    Indian Academy of Sciences (India)

    A V Radha; P Vishnu Kamath

    2004-08-01

    The layered double hydroxide (LDH) of Zn with Cr on treatment with a hypochlorite solution releases chromate ions as a result of oxidative leaching by a dissolution–reprecipitation mechanism. The residue is found to be -Zn(OH)2. The LDH of Mg with Cr on the other hand is resistant to oxidative leaching. In contrast, a X-ray amorphous gel of the coprecipitated hydroxides of Mg and Cr yields chromate ions. These results suggest that the oxidation potential of Cr(III) in LDHs is determined by the nature of the divalent ion and the crystallinity of the phase while being unaffected by the nature of the intercalated anions.

  1. Tunable magnetic resonance in double layered metallic structures.

    Science.gov (United States)

    Zhou, L; Zhu, Y Y

    2011-12-01

    Double layered metallic gratings have been investigated both theoretically and experimentally. The authors have reported that tunable magnetic resonance (MR) can be achieved by modulating the vertical chirped width dh which could be controlled conveniently in the common electron and/or ion beam microfabrications. The linear relationship between MR wavelength and dh has been reported. By introducing the difference of electric and magnetic penetration depth, an analytic formula deduced from a modified LC model has shown good agreement with the simulation results, and an effective width for trapezoidal sandwiched microstructures has been presented. Our results may provide an alternative choice for tunable MR and broad bandwidth of magnetic metamaterials.

  2. The photoluminescence of Co-Al-layered double hydroxide

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    We report a new optical behaviour of pure Co-Al-layered double hydroxide (LDH). It was found that the Co-Al-LDH sample could emit fluorescence without any fluorescent substances intercalated. Its excitation spectrum shows a maximum peak near the wavelength 370 nm, the maximum emission peak appears at 430 nm and the photoluminescence colour of the Co-Al-LDH sample is blue. This new optical property will be expected to extend the potential applications of LDHs in optical materials field.

  3. LAYERED DOUBLE HYDROXIDES: NANOMATERIALS FOR APPLICATIONS IN AGRICULTURE

    Directory of Open Access Journals (Sweden)

    Luíz Paulo Figueredo Benício

    2015-02-01

    Full Text Available The current research aims to introduce Layered Double Hydroxides (LDH as nanomaterials to be used in agriculture, with particular reference to its use as storage and slow release matrix of nutrients and agrochemicals for plant growing. Structural characteristics, main properties, synthesis methods and characterization of LDH were covered in this study. Moreover, some literature data have been reported to demonstrate their potential for storage and slow release of nitrate, phosphate, agrochemicals, besides as being used as adsorbent for the wastewater treatment. This research aims to expand, in near future, the investigation field on these materials, with application in agriculture, increasing the interface between chemistry and agronomy.

  4. Carrier Rexlaxation Time Divergence in Single and Double Layer Cuprates.

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, M.; Rast, S.; Onellion, M.; Demsar, J.; Taylor, A. J.; Glinka, Y.; Tolk, N. H.; Ren, Y. H.; Lupke, G.; Klimov, A.; Sobolewski, R.; Xu, Y.; Si, Weidong; Zeng, X. H.; Soukiassian, A.; Xi, X. X.; Abrecht, M.; Ariosa, D.; Pavuna, D.; Drapf, A.; Manzke, R.; Printz, J. O.; Williamsen, M. S.; Downum, K. E.; Guptasarma, P.

    2003-06-20

    We report the transient optical pump-probe reflectivity measurements on single and double layer cuprate single crystals and thin films of ten different stoichiometries. We find that with sufficiently low fluence the relaxation time (tau [sub R] of all samples exhibits a power law divergence with temperature (T): tau [sub R] [proportional to] T[sup -3 [plus or minus] 0.5]. Further, the divergence has an onset temperature above the superconducting transition temperature for all superconducting samples. Possible causes of this divergence are discussed.

  5. Candidate organic electrolytes for electric double-layer capacitor application

    Institute of Scientific and Technical Information of China (English)

    B.Fang; Y.Wei; K.Suzuki; M.Kumagai

    2004-01-01

    Electrolytic conductivity,viscosity and electrochemical behavior were investigated for organic electrolytes based on PC(Propylene carbonate),MAN(Methoxy acetonitrile) and GBL(γ-Butyrolactone) solvents.It was found that 1 mol/L Et4NBF4-MAN had the highest conductivity,lowest viscosity and acceptable potential window.The specific capacitance and energy density obtained from the capacitor using 1 mol/L Et4NBF4-MAN as electrolyte were the highest among all the tested electrolytes.1 mol/L Et4NBF4-GBL also seemed promising to be used in electric double-layer capacitor (EDLCs).

  6. Influence of localised double suction on a turbulent boundary layer

    Science.gov (United States)

    Oyewola, O.; Djenidi, L.; Antonia, R. A.

    2007-07-01

    The effects of localised suction applied through a pair of porous wall strips on a turbulent boundary layer have been quantified through the measurements of mean velocity and Reynolds stresses. The results indicate that the use of second strip extends the pseudo-relaminarisation zone but also reduces the overshoot in the longitudinal and normal r.m.s. velocities. While the minimum r.m.s. occurs at x/δo=3.0 (one strip) and x/δo=12 (two strips), the reduction observed for the latter case is larger. Relative to no suction, the turbulence level is modified by suction and the effect is enhanced with double suction. This increased effectiveness reflects the fact that the second strip acts on a boundary layer whose near-wall active motion has been seriously weakened by the first strip.

  7. A novel vibrational energy harvester with electric double layer electrets

    Science.gov (United States)

    Ono, S.; Miwa, K.; Iori, J.; Mitsuya, H.; Ishibashi, K.; Sano, C.; Toshiyoshi, H.; Fujita, H.

    2016-11-01

    We propose a new type of vibrational energy harvester with an electric double layer (EDL) electrets. Instead of using any external bias-voltage source or dielectric layer on top of the metal electrode to sustain EDL, we succeed to anchor the ions to polymer network to form the EDL electrets. By changing contact area between the EDL electrets and the electrode, large electric current is generated in the circuit. Owing to extremely large capacitance of the EDL electret, vibrational energy harvesters have the unique capability to leverage the high- density charge accumulation to the electrode and obtained current density becomes as high as 200 μA/cm2 with output voltage of 1V even with low frequency vibrations as low as 1 Hz.

  8. Polymerization reaction in restricted space of layered double hydroxides (LDHs)

    Institute of Scientific and Technical Information of China (English)

    SI Lichun; WANG Ge; CAI Fuli; WANG Zhiqiang; DUAN Xue

    2004-01-01

    This paper reported the preparation of styrene sulfonate intercalated layered double hydroxides (LDHs) material, SS-LDHs by coprecipitation method, followed by in-situ polymerization of the monomers in the interlayer space of LDHs. The polymerization reaction was monitored by UV and NMR. It is confirmed that when the reaction occurred at 100℃ for 24 h, part of monomers did not react .When the reaction was carried out at 150℃, the polymeriza tion of the intercalated monomers is complete to afford the polymer intercalated product PSS-LDHs. During the polymerization process, the layered structure remains well. At thesame time the gallery height increases with the lengthening of reaction time. This is preliminarily because that the PSS becomes more swelling with the amount of water it absorbs due to its hygroscopicity property.

  9. Structural characterisation of a layered double hydroxide nanosheet

    Science.gov (United States)

    Funnell, Nicholas P.; Wang, Qiang; Connor, Leigh; Tucker, Matthew G.; O'Hare, Dermot; Goodwin, Andrew L.

    2014-06-01

    We report the atomic-scale structure of a Zn2Al-borate layered double hydroxide (LDH) nanosheet, as determined by reverse Monte Carlo (RMC) modelling of X-ray total scattering data. This study involves the extension of the RMC method to enable structural refinement of two-dimensional nanomaterials. The refined LDH models show the intra-layer geometry in this highly-exfoliated phase to be consistent with that observed in crystalline analogues, with the reciprocal-space scattering data suggesting a disordered arrangement of the Zn2+ and Al3+ cations within the nanosheet. The approach we develop is generalisable and so offers a method of characterising the structures of arbitrary nanosheet phases, including systems that support complex forms of disorder within the nanosheets themselves.We report the atomic-scale structure of a Zn2Al-borate layered double hydroxide (LDH) nanosheet, as determined by reverse Monte Carlo (RMC) modelling of X-ray total scattering data. This study involves the extension of the RMC method to enable structural refinement of two-dimensional nanomaterials. The refined LDH models show the intra-layer geometry in this highly-exfoliated phase to be consistent with that observed in crystalline analogues, with the reciprocal-space scattering data suggesting a disordered arrangement of the Zn2+ and Al3+ cations within the nanosheet. The approach we develop is generalisable and so offers a method of characterising the structures of arbitrary nanosheet phases, including systems that support complex forms of disorder within the nanosheets themselves. Electronic supplementary information (ESI) available. See DOI: 10.1039/c4nr01265h

  10. Interface phenomena in double-layer organic photoreceptors

    Science.gov (United States)

    Sasvari, G.; Juhasz, C.; Hirsch, J.

    1997-07-01

    Single photogeneration layers of a phthalocyanine pigment dispersed in a polyvinyl butyral binder, and double layers consisting of the photogeneration layer coated with hole transport layers of TPTA, DEH and BD molecularly dispersed in polycarbonate were exposed to single-shot light excitation. The charge collected was measured as a function of temperature, electric field, exposure intensity and duration. The resulting mean transport level of TPTA was found to be 0.17 eV, and that of DEH 0.11 eV, below the valence band of the pigment, but that of BD was found to be 0.09 eV above it. The injection efficiencies were independent of field and amounted to 0953-8984/9/30/015/img1 for TPTA and 0.02 for DEH, at room temperature, but that for BD was 0.1 independently of temperature. Models for the injection efficiencies in these cases are also discussed in this work for the first time.

  11. Physical properties of fixed-charge layer double hydroxides

    Science.gov (United States)

    Hines, D. R.; Solin, S. A.; Costantino, Umberto; Nocchetti, Morena

    2000-05-01

    The physical properties of a series of layer double hydroxides (LDH) of the form [(CO3)0.195(1-x)Cl0.39x(H2O)y]:[Zn0.61Al0.39(OH)2], 0layer water molecules form a hydration ring which defines the height of the solvated, nested Cl anion. The water molecules can tilt around their C2v axis such that the height of the solvated Cl ion is a function of the number of molecules forming the hydration ring. The composition dependence of the basal spacing, determined from x-ray-diffraction powder patterns measured as a function of humidity and temperature for these materials, is a function of both the Cl concentration (x) and the number of guest layer water molecules (y). Distinct basal spacing curves are observed for fully hydrated, partially hydrated, and dehydrated materials. At x=1 the Cl end-member material exhibits a change in stacking sequence from a 3R polytype to a 2H polytype upon dehydration. The dehydrated form of this material also exhibits a (3×3)R30° superlattice ordering of the Cl ions. Due to the nesting of the Cl ion and the active nature of the water molecules, the basal spacing vs x curve for the dehydrated materials is the only curve that can be fit by the discrete finite layer rigidity model. The interlayer rigidity parameter for LDH materials has been determined to be p=4.84+/-0.06 indicating that these materials are stiffer than class-II layered solids but not as stiff as class-III layered solids.

  12. Selectivity of Crystal Growth Direction in Layered Double Hydroxides

    Institute of Scientific and Technical Information of China (English)

    赵芸; 梁吉; 李峰; 段雪

    2004-01-01

    Investigation of selectivity of crystal growth direction in layered double hydroxides is helpful to control their particle sizes in different directions. Mg-Al layered double hydroxides (LDHs) were synthesized using a coprecipitation method. The influences of aging temperature, aging time, and Mg/Al molar ratio on the crystal structure, the LDHs particle size, and the selectivity of crystal growth in different directions were investigated. The results show that the size of the crystallites in the a direction is larger than that in the c direction for all experimental conditions, indicating faster crystal growth in the a direction than in the c direction. The crystallite sizes in the a and c directions both increase with decreasing Mg/Al molar ratio but with less difference between the sizes in the two directions. Therefore, the crystal growth rate in the c direction increases more than that in the a direction as the Mg/Al molar ratio decreases. The influence of the aging time, aging temperature, and Mg/Al molar ratio on the selectivity of the crystal growth direction can be used to prepare LDHs with selected sizes in the a and c directions.

  13. Resonance scattering characteristics of double-layer spherical particles

    Institute of Scientific and Technical Information of China (English)

    Xuejin Dong; Mingxu Su; Xiaoshu Cai

    2012-01-01

    Based on the principle of ultrasonic resonance scattering,sound-scattering characteristics of double-layer spherical particles in water were numerically studied in this paper.By solving the equations of the scattering matrix,the scattering coefficient determined by the boundary conditions can be obtained,thus the expression for the sound-scattering function of a single double-layer spherical particle can be derived.To describe the resonance scattering characteristics of a single particle,the reduced scattering cross section and reduced extinction cross section curves were found through numerical calculation.Similarly,the numerically calculated sound attenuation coefficient curves were used to depict the resonance scattering characteristics of monodisperse and polydisperse particles.The results of numerical calculation showed that,for monodisperse particles,the strength of the resonance was mainly related to the particle size and the total number of particles; while for polydisperse particles,it was primarily affected by the particle size,the coverage of the particle size distribution and the particle concentration.

  14. Partial double-layered patella in a nondysplasic adolescent.

    Science.gov (United States)

    García-Mata, Serafín; Hidalgo-Ovejero, Angel

    2016-11-01

    Double-layered patella (DLP) is a rare patella-formation abnormality reported in association with multiple epiphyseal dysplasia. DLP is one of the five types of bipartite patella, caused by a coronal septum that divides the patella into anterior and posterior segments. Although the double layer of bone has been reported as complete, it may also manifest as partial, as in our case. A 13-year-old male patient attended A&E after accidentally falling and sustaining a direct injury to his left knee, with pain in the anterior surface of the right patella. He was diagnosed with an incomplete vertical fracture of the left patella. An axial view radiography indicated an external partial DLP. No bone dysplasia was found. Computed tomographic scan and MRI showed partial DLP and bone marrow oedema because of the injury in the femoral condyle, but no fracture. The reason for highlighting this type of patella abnormality is to present the case of a patient without bone dysplasia, either partial or incomplete, that has not been reported previously. We also wish to emphasize the importance of not confusing it with a fracture in standard radiographies.

  15. Biodiesel synthesis using calcined layered double hydroxide catalysts

    Energy Technology Data Exchange (ETDEWEB)

    Schumaker, J. Link [University of Kentucky; Crofcheck, Czarena [University of Kentucky; TAckett, S. Adam [University of Kentucky; Santillan-Jimenez, Eduardo [University of Kentucky; Morgan, Tonya [University of Kentucky; Ji, Yaying [University of Kentucky; Crocker, Mark [University of Kentucky; Toops, Todd J [ORNL

    2008-01-01

    The catalytic properties of calcined Li-Al, Mg-Al and Mg-Fe layered double hydroxides (LDHs) were examined in two transesterification reactions, namely, the reaction of glyceryl tributyrate with methanol, and the reaction of soybean oil with methanol. While the Li-Al catalysts showed high activity in these reactions at the reflux temperature of methanol, the Mg-Fe and Mg-Al catalysts exhibited much lower methyl ester yields. CO2 TPD measurements revealed the presence of sites of weak, medium and strong basicity on both Mg-Al and Li-Al catalysts, the latter showing higher concentrations of medium and strong base sites; by implication, these are the main sites active in transesterification catalyzed by calcined Li-Al LDHs. Maximum activity was observed for the Li-Al catalysts when a calcination temperature of 450-500 aC was applied, corresponding to decomposition of the layered double hydroxide to the mixed oxide without formation of crystalline lithium aluminate phases.

  16. Characteristics of Double Tropopause Layers Observed During TORERO

    Science.gov (United States)

    Haggerty, J. A.; Mahoney, M. J.; Campos, T. L.; Pierce, B.; Volkamer, R. M.

    2012-12-01

    The existence of double tropopauses is indicated in data collected during the Tropical Ocean tRoposphere Exchange of Reactive halogen species and Oxygenated VOC (TORERO) experiment in January - February 2012. Airborne remote and in situ measurements from the NSF/NCAR Gulfstream V place tropopause heights at ~12-13 km and ~16-17 km during oceanic flights westward and southward from Antofagasta, Chile. Coastal radiosonde profiles confirm the locations of these tropopause layers. Various measurements define and characterize the transition layer between the upper troposphere and lower stratosphere. The Microwave Temperature Profiler (MTP), a scanning radiometer which measures emitted radiation at three frequencies, provides temperature vertical structure over a layer several kilometers above and below the aircraft with vertical resolution sufficient to resolve the tropopause. Tropopause height as determined from the temperature profile is based on the cold point and lapse rate transitions. In situ measurements of trace gases such as ozone, carbon monoxide, and water vapor also provide distinct signatures at the tropopause, although the aircraft did not always reach sufficient altitudes to detect the second tropopause. Model profiles of temperature and trace gases were also generated by the Real-time Air Quality Modeling System (RAQMS) during TORERO. RAQMS is a global meteorological, chemical and aerosol assimilation/forecasting system that assimilates real-time stratospheric ozone retrievals from the Microwave Limb Sounder (MLS), total column ozone from the Ozone Monitoring Instrument (OMI), and aerosol optical depth (AOD) from the Moderate Resolution Imaging Spectroradiometer (MODIS). In this paper, observations of the TORERO double tropopause features as defined by temperature and trace gas profiles are presented and compared to model-defined tropopause properties.

  17. Weak localization in electric-double-layer gated few-layer graphene

    Science.gov (United States)

    Gonnelli, R. S.; Piatti, E.; Sola, A.; Tortello, M.; Dolcini, F.; Galasso, S.; Nair, J. R.; Gerbaldi, C.; Cappelluti, E.; Bruna, M.; Ferrari, A. C.

    2017-09-01

    We induce surface carrier densities up to  ˜7\\centerdot {{10}14} cm-2 in few-layer graphene devices by electric double layer gating with a polymeric electrolyte. In 3-, 4- and 5-layer graphene below 20-30 K we observe a logarithmic upturn of resistance that we attribute to weak localization in the diffusive regime. By studying this effect as a function of carrier density and with ab initio calculations we derive the dependence of transport, intervalley and phase coherence scattering lifetimes on total carrier density. We find that electron-electron scattering in the Nyquist regime is the main source of dephasing at temperatures lower than 30 K in the  ˜1013 cm-2 to  ˜7\\centerdot {{10}14} cm-2 range of carrier densities. With the increase of gate voltage, transport elastic scattering is dominated by the competing effects due to the increase in both carrier density and charged scattering centers at the surface. We also tune our devices into a crossover regime between weak and strong localization, indicating that simultaneous tunability of both carrier and defect density at the surface of electric double layer gated materials is possible.

  18. On the dielectric response of complex layered oxides: Mica-type silicates and layered double hydroxides

    Science.gov (United States)

    Mehrotra, Vivek; Giannelis, Emmanuel P.

    1992-08-01

    The dielectric properties of mica-type silicates and layered double hydroxides have been studied in the pristine and various intercalated forms in the frequency range 101-107 Hz. A relaxation peak has been observed for the pristine silicate, whereas the pristine layered double hydroxide exhibits an anomalous low-frequency dispersion. The dielectric response is rationalized in terms of structural ordering and fluctuation of charge carriers as well as models invoking fractal time processes and fractal structure. The response is also related to the structure and mobility of the intercalated water molecules. In both pristine hosts, the predominant conduction mechanism is proton hopping between sites generated by a network of intercalated water molecules. Silicate intercalated with the insulating form of polyaniline exhibits an almost frequency-independent response. In the case of conducting polyaniline intercalated silicate, where polarons are the majority charge carriers, an anomalous low-frequency dispersion is observed and the response is typical of a metal-insulator composite. Finally, impedance measurements have been used to calculate the spatial disorder and/or surface irregularity of the host layers, expressed by the fractal dimension ds. The changes observed in ds upon intercalation of high-charge ions are correlated to the stacking disorder of the host layers.

  19. Nanosized Ni–Al layered double hydroxides—Structural characterization

    Energy Technology Data Exchange (ETDEWEB)

    Jitianu, Mihaela, E-mail: jitianum@wpunj.edu [William Paterson University, Department of Chemistry, 300 Pompton Road, Wayne, NJ 07470 (United States); Gunness, Darren C. [William Paterson University, Department of Chemistry, 300 Pompton Road, Wayne, NJ 07470 (United States); Aboagye, Doreen E. [Lehman College – City University of New York, Department of Chemistry, Davis Hall, 250 Bedford Boulevard West, Bronx, NY 10468 (United States); Zaharescu, Maria [Institute of Physical Chemistry, 202 Splaiul Independentei, 060021 Bucharest (Romania); Jitianu, Andrei, E-mail: andrei.jitianu@lehman.cuny.edu [Lehman College – City University of New York, Department of Chemistry, Davis Hall, 250 Bedford Boulevard West, Bronx, NY 10468 (United States)

    2013-05-15

    Highlights: ► The takovite anionic clays were obtained using the sol–gel method. ► The effect of samples’ composition on the structural and textural characteristics has been investigated. ► X-ray analysis. ► FTIR spectroscopy evidenced a disordered interlayer structure. ► FESEM and TEM analysis showed that the samples have high porosity. - Abstract: Takovite, a natural mineral with the formula Ni{sub 6}Al{sub 2}(OH){sub 6}CO{sub 3}·5H{sub 2}O belongs to the large class of layered double hydroxides (LDHs) and contains positively charged Ni(II) and Al(III) layers alternating with layers containing carbonate ions and water molecules. Mesoporous takovite-type layered double hydroxides (LDH) of the general formula [Ni{sub 1−x}Al{sub x}(OH){sub 2}]{sup x+}(CO{sub 3}{sup 2−}){sub x/2}·nH{sub 2}O with different Ni/Al molar ratios (1.9–2.8) have been successfully synthesized by the sol–gel method, followed by anionic exchange using nickel acetylacetonate and aluminum isopropylate as cation precursors. A single LDH phase and an anisotropic growth of very small crystallites (below 4 nm) have been evidenced by X-ray diffraction. The effect of samples’ composition on their structural and textural characteristics has been investigated. The BET surface area values are in the range of 100–122 m{sup 2}/g. BJH pore radius decreased with increase in the Al(III) content in the LDHs. FESEM micrographs show large aggregates of highly porous LDH particles, while TEM analysis reveals irregular agglomerates of crystallites, among which some of them displayed a developing hexagonal shape. The average particle size variation with the Al(III) content in the samples follows the same trend as the pore radius, the sample with the highest Ni/Al ratio displaying also the smallest particle size. This sample becomes even more interesting, since TEM analysis shows agglomerates with inside circular structures, feature not observed for the other Ni/Al ratios investigated.

  20. Inference of Polymer Adsorption from Electrical Double Layer Measurements : the Silver Iodide-Polyvinyl Alcohol System

    NARCIS (Netherlands)

    Koopal, L.K.

    1978-01-01

    The purpose of this study was to investigate how the double layer properties of charged particles are modified by the presence of adsorbed polymer molecules and to obtain information on the conformation of the polymer layer from the observed alterations in the double layer properties.In chapter 1. t

  1. Electronic spectra of anions intercalated in layered double hydroxides

    Indian Academy of Sciences (India)

    S Radha; P Vishnu Kamath

    2013-10-01

    Transition metal complexes intercalated in layered double hydroxides have a different electronic structure as compared to their free state owing to their confinement within the interlayer gallery. UV–Vis absorptions of the intercalated complex anions show a significant shift as compared to their free state. The ligand to metal charge transfer transitions of the ferricyanide anion show a red shift on intercalation. The ferrocyanide ion shows a significant blue shift of – bands due to the increased separation between 2g and g levels on intercalation. MnO$^{-}_{4}$ ion shows a blue shift in its ligand to metal charge transfer transition since the non-bonding 1 level of oxygen from which the transition arises is stabilized.

  2. Biological evaluation of layered double hydroxides as efficient drug vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Li Yan; Liu Dan; Chang Qing; Liu Dandan; Xia Ying; Liu Shuwen; Peng Nanfang; Yang Xu [Hubei Key Laboratory of Genetic Regulation and Integrative Biology, College of Life Science, Huazhong Normal University, Wuhan 430079 (China); Ai Hanhua [College of Physical Science and Technology, Huazhong Normal University, Wuhan 430079 (China); Xi Zhuge, E-mail: yangxu@mail.ccnu.edu.cn [Tianjin Institutes of Health and Environmental Medicine, Tianjin 300050 (China)

    2010-03-12

    Recently there has been a rapid expansion of the development of bioinorganic hybrid systems for safe drug delivery. Layered double hydroxides (LDH), a variety of available inorganic matrix, possess great promise for this purpose. In this study, an oxidative stress biomarker system, including measurement of reactive oxygen species, glutathione content, endogenous nitric oxide, carbonyl content in proteins, DNA strand breaks and DNA-protein crosslinks, was designed to evaluate the biocompatibility of different concentrations of nano-Zn/Al-LDH with a Hela cell line. The drug delivery activity of the LDH-folic-acid complex was also assessed. The resulting data clearly demonstrated that nano-LDH could be applied as a relatively safe drug vehicle with good delivery activity, but with the caveat that the effects of high dosages observed here should not be ignored when attempting to maximize therapeutic activity by increasing LDH concentration.

  3. Hydrothermal Synthesis of Ni/Al Layered Double Hydroxide Nanorods

    Directory of Open Access Journals (Sweden)

    Yun Zhao

    2011-01-01

    Full Text Available Ni/Al layered double hydroxide (LDH nanorods were successfully synthesized by the hydrothermal reaction. The crystal structure of the products was characterized by X-ray diffraction (XRD. The morphology of the products was observed using transmission electron microscopy (TEM and field emission scanning electron microscopy (SEM. The influences of reaction time and pH value on the morphology of the Ni/Al LDHs were investigated. The result showed that the well-crystallized nanorods of Ni/Al LDHs could be obtained when the pH value was about 10.0 with a long reaction time (12–18 h at 180°C.

  4. Electric Double-layer Capacitor Based on Activated Carbon Material

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    In this study electric double-layer capacitors (EDLCs) based on activated carbon material and organic electrolyte (tetraethyl ammonium tetrafluoroborate) were explored. The fabrication method for EDLC is presented and the performance of EDLC was examined by using the cyclic voltammetry, constant-current charging and discharging technique, electrochemical impedance spectroscopy measurements. Influence of various components and design parameters on the performance of the capacitors were preliminarily investigated. Up to now, EDLC based on carbon materials can deliver 20.7 W/kg at the discharge rate ofI=0.3 mA, together with the energy density of 8.5 Wh/kg. Equivalent series resistance (ESR) is 0.716 Ω.cm2. The specific power of the capacitor is low and further attempts to raise the power capability of the capacitors are necessary. Some considerations are put forward to further improve the performance of EDLC.

  5. Layered Double Hydroxide-Based Nanocarriers for Drug Delivery

    Science.gov (United States)

    Bi, Xue; Zhang, Hui; Dou, Liguang

    2014-01-01

    Biocompatible clay materials have attracted particular attention as the efficient drug delivery systems (DDS). In this article, we review developments in the use of layered double hydroxides (LDHs) for controlled drug release and delivery. We show how advances in the ability to synthesize intercalated structures have a significant influence on the development of new applications of these materials. We also show how modification and/or functionalization can lead to new biotechnological and biomedical applications. This review highlights the most recent progresses in research on LDH-based controlled drug delivery systems, focusing mainly on: (i) DDS with cardiovascular drugs as guests; (ii) DDS with anti-inflammatory drugs as guests; and (iii) DDS with anti-cancer drugs as guests. Finally, future prospects for LDH-based drug carriers are also discussed. PMID:24940733

  6. Prediction of Double Layer Grids' Maximum Deflection Using Neural Networks

    Directory of Open Access Journals (Sweden)

    Reza K. Moghadas

    2008-01-01

    Full Text Available Efficient neural networks models are trained to predict the maximum deflection of two-way on two-way grids with variable geometrical parameters (span and height as well as cross-sectional areas of the element groups. Backpropagation (BP and Radial Basis Function (RBF neural networks are employed for the mentioned purpose. The inputs of the neural networks are the length of the spans, L, the height, h and cross-sectional areas of the all groups, A and the outputs are maximum deflections of the corresponding double layer grids, respectively. The numerical results indicate that the RBF neural network is better than BP in terms of training time and performance generality.

  7. Layered Double Hydroxide-Based Nanocarriers for Drug Delivery

    Directory of Open Access Journals (Sweden)

    Xue Bi

    2014-06-01

    Full Text Available Biocompatible clay materials have attracted particular attention as the efficient drug delivery systems (DDS. In this article, we review developments in the use of layered double hydroxides (LDHs for controlled drug release and delivery. We show how advances in the ability to synthesize intercalated structures have a significant influence on the development of new applications of these materials. We also show how modification and/or functionalization can lead to new biotechnological and biomedical applications. This review highlights the most recent progresses in research on LDH-based controlled drug delivery systems, focusing mainly on: (i DDS with cardiovascular drugs as guests; (ii DDS with anti-inflammatory drugs as guests; and (iii DDS with anti-cancer drugs as guests. Finally, future prospects for LDH-based drug carriers are also discussed.

  8. Structure and Capacitance of Electrical Double Layers inside Micropores

    Science.gov (United States)

    Feng, Guang; Qiao, Rui; Huang, Jingsong; Sumpter, Bobby G.; Meunier, Vincent

    2010-03-01

    Recent experiments indicate that the specific capacitance of micropores (diameter less than 2nm) increases anomalously as the pore size decreases^[1]. To understand the physical origin of this discovery, we performed a series of molecular dynamics simulations to study the electrical double layers (EDLs) in micropores with different shapes (tube vs slit) and pore sizes (0.668nm - 3.342nm). Several different aqueous electrolytes (K^+, Na^+, Cl^-, and F^- in water) were used in these micropores. We quantified the structure of EDLs inside the pores, and computed the capacitance of EDLs. The scaling of capacitance shows a qualitative agreement with the experimental observations. We attribute the anomalous enhancement of capacitance in micropores to the short-range ionelectrode and ionsolvent interactions.[1] J. Chmiola, G. Yushin, Y. Gogotsi, C. Portet, P. Simon, and P.L. Taberna, Science 2006, 313, 1760.

  9. Layered double oxide (LDO) particle containing photoreactive hybrid layers with tunable superhydrophobic and photocatalytic properties

    Science.gov (United States)

    Deák, Ágota; Janovák, László; Csapó, Edit; Ungor, Ditta; Pálinkó, István; Puskás, Sándor; Ördög, Tibor; Ricza, Tamás; Dékány, Imre

    2016-12-01

    Inorganic/organic hybrid layers have been prepared having superhydrophobic as well as photoreactive properties. The hybrid thin films with micro- and nanosized dual-scale surface roughness consist of ∼25 μm layered double oxide (LDO) photocatalyst particles and low surface energy poly(perfluorodecyl acrylate) [p(PFDAc)] fluoropolymer binder material. The application of [p(PFDAc)] resulted in the decrease in the surface free energy of the hydrophilic LDO. The structured surface LDO with ∼12% ZnO phase content were synthesized from layer double hydroxide (LDH) spheres. The determined excitation wavelength and the calculated band gap energy values were 386 nm and 3.23 eV, respectively. The hybrid thin films were prepared by a simple spray-coating method, which is a low-cost, fast and scalable film-forming technique. The surface roughness and also the wetting properties of the two-component hybrid layers proved to be finely adjustable by the LDO:fluoropolymer ratio. It was found that at 80-90 wt% LDO content, the thin films with a surface free energy value of ∼12 mJ/m2 displayed superhydrophobic behaviour (Θ > 150°) with satisfactory photocatalytic properties. This means special photoreactive surfaces with superhydrophobic properties instead of the conventional superhydropilic photocatalyst layers. According to the benzoic acid photodegradation test experiments of benzoic acid, the hybrid layers with 80-90 wt% LDO content photooxidized 22-24% of the initial test molecule concentration (0.17 g/L) under UV-A (λmax = 365 nm) illumination.

  10. Layered-double-hydroxide-modified electrodes: electroanalytical applications.

    Science.gov (United States)

    Tonelli, Domenica; Scavetta, Erika; Giorgetti, Marco

    2013-01-01

    Two-dimensional inorganic solids, such as layered double hydroxides (LDHs), also defined as anionic clays, have open structures and unique anion-exchange properties which make them very appropriate materials for the immobilization of anions and biomolecules that often bear an overall negative charge. This review aims to describe the important aspects and new developments of electrochemical sensors and biosensors based on LDHs, evidencing the research from our own laboratory and other groups. It is intended to provide an overview of the various types of chemically modified electrodes that have been developed with these 2D layered materials, along with the significant advances made over the last several years. In particular, we report the main methods used for the deposition of LDH films on different substrates, the conductive properties of these materials, the possibility to use them in the development of membranes for potentiometric anion analysis, the early analytical applications of chemically modified electrodes based on the ability of LDHs to preconcentrate redox-active anions and finally the most recent applications exploiting their electrocatalytic properties. Another promising application field of LDHs, when they are employed as host structures for enzymes, is biosensing, which is described considering glucose as an example.

  11. The double-layered chemical structure in DB white dwarfs

    CERN Document Server

    Althaus, L G

    2004-01-01

    We study the structure and evolution of white dwarf stars with helium-rich atmospheres (DB) in a self-consistent way with the predictions of time-dependent element diffusion. Our treatment of diffusion includes gravitational settling and chemical and thermal diffusion. OPAL radiative opacities for arbitrary metallicity and carbon-and oxygen-rich compositions are employed. Emphasis is placed on the evolution of the diffusion-modeled double-layered chemical structure. This structure, which is characterized by a pure helium envelope atop an intermediate remnant shell rich in helium, carbon and oxygen, is expected for pulsating DB white dwarfs, assuming that they are descendants of hydrogen-deficient PG1159 post-AGB stars. We find that, depending on the stellar mass, if DB white dwarf progenitors are formed with a helium content smaller than \\approx 10^-3 M_*, a single-layered configuration is expected to emerge during the DB pulsation instability strip. We also explore the consequences of diffusively evolving ch...

  12. Plasmons in spatially separated double-layer graphene nanoribbons

    Science.gov (United States)

    Bagheri, Mehran; Bahrami, Mousa

    2014-05-01

    Motivated by innovative progresses in designing multi-layer graphene nanostructured materials in the laboratory, we theoretically investigate the Dirac plasmon modes of a spatially separated double-layer graphene nanoribbon system, made up of a vertically offset armchair and metallic graphene nanoribbon pair. We find striking features of the collective excitations in this novel Coulomb correlated system, where both nanoribbons are supposed to be either intrinsic (undoped/ungated) or extrinsic (doped/gated). In the former, it is shown the low-energy acoustical and the high-energy optical plasmon modes are tunable only by the inter-ribbon charge separation. In the later, the aforementioned plasmon branches are modified by the added doping factor. As a result, our model could be useful to examine the existence of a linear Landau-undamped low-energy acoustical plasmon mode tuned via the inter-ribbon charge separation as well as doping. This study might also be utilized for devising novel quantum optical waveguides based on the Coulomb coupled graphene nanoribbons.

  13. Propagation characteristics of ion-acoustic double layer in multicomponent inhomogeneous auroral zone plasma

    Indian Academy of Sciences (India)

    HARVINDER KAUR; TARSEM SINGH GILL; PARVEEN BALA

    2017-08-01

    In the present investigation, ion-acoustic double layers in an inhomogeneous plasma consisting of Maxwellian and non-thermal distributions of electrons are studied.We have derived a modified Korteweg–de Vries (mKdV) equation for ion-acoustic double layers propagating in a collisionless inhomogeneous plasma. It is observed that the non-thermal parameters affect the amplitude and width of the double layer which further depend on the density.

  14. Electrochemical double-layer capacitors based on functionalized graphene

    Science.gov (United States)

    Pope, Michael Allan

    Graphene is a promising electrode material for electrochemical double-layer capacitors (EDLCs) used for energy storage due to its high electrical conductivity and theoretical specific surface area. However, the intrinsic capacitance of graphene is known to be low and governed by the electronic side of the interface. Furthermore, graphene tends to aggregate and stack together when processed into thick electrode films. This significantly lowers the ion-accessible specific surface area (SSA). Maximizing both the SSA and the intrinsic capacitance are the main problems addressed in this thesis in an effort to improve the specific capacitance and energy density of EDLCs. In contrast to pristine graphene, functionalized graphene produced by the thermal exfoliation of graphite oxide contains residual functional groups and lattice defects. To study how these properties affect the double-layer capacitance, a model electrode system capable of measuring the intrinsic electrochemical properties of functionalized graphene was developed. To prevent artifacts and uncertainties related to measurements on porous electrodes, the functionalized graphene sheets (FGSs) were assembled as densely tiled monolayers using a Langmuir-Blodgett technique. In this way, charging can be studied in a well-defined 2D geometry. The possibility of measuring and isolating the intrinsic electrochemical properties of FGS monolayers was first demonstrated by comparing capacitance and redox probe measurements carried out on coatings deposited on passivated gold and single crystal graphite substrates. This monolayer system was then used to follow the double-layer capacitance of the FGS/electrolyte interface as the structure and chemistry of graphene was varied by thermal treatments ranging from 300 °C to 2100 °C. Elemental analysis and Raman spectroscopy were used to determine the resulting chemical and structural transformation upon heat treatment. It was demonstrated that intrinsically defective

  15. Electron emission from a double-layer metal under femtosecond laser irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Li, Shuchang; Li, Suyu; Jiang, Yuanfei; Chen, Anmin, E-mail: amchen@jlu.edu.cn; Ding, Dajun; Jin, Mingxing, E-mail: mxjin@jlu.edu.cn

    2015-01-01

    In this paper we theoretically investigate electron emission during femtosecond laser ablation of single-layer metal (copper) and double-layer structures. The double-layer structure is composed of a surface layer (copper) and a substrate layer (gold or chromium). The calculated results indicate that the double-layer structure brings a change to the electron emission from the copper surface. Compared with the ablation of a single-layer, a double-layer structure may be helpful to decrease the relaxation time of the electron temperature, and optimize the electron emission by diminishing the tailing phenomenon under the same absorbed laser fluence. With the increase of the absorbed laser fluence, the effect of optimization becomes significant. This study provides a way to optimize the electron emission which can be beneficial to generate laser induced ultrafast electron pulse sources.

  16. Epitaxial Growth of High-Quality Silicon Films on Double-Layer Porous Silicon

    Institute of Scientific and Technical Information of China (English)

    黄宜平; 竺士炀; 李爱珍; 王瑾; 黄靖云; 叶志镇

    2001-01-01

    The epitaxial growth of a high-quality silicon layer on double-layer porous silicon by ultra-high vacuum/chemical vapour deposition has been reported. The two-step anodization process results in a double-layer porous silicon structure with a different porosity. This double-layer porous silicon structure and an extended low-temperature annealing in a vacuum system was found to be helpful in subsequent silicon epitaxial growth. X-ray diffraction,cross-sectional transmission electron microscopy and spreading resistance testing were used in this work to study the properties of epitaxial silicon layers grown on the double-layer porous silicon. The results show that the epitaxial silicon layer is of good crystallinity and the same orientation with the silicon substrate and the porous silicon layer.

  17. Proton Acceleration with Double-Layer Targets in the Radiation Pressure Dominant Regime

    Institute of Scientific and Technical Information of China (English)

    LU Hai-Yang; WANG Cheng; LIU Jian-Sheng

    2011-01-01

    @@ Acceleration of protons by a circularly polarized laser pulse irradiating on a double-layer target is investigated by a theoretical model and particle-in-cell simulations.The target is made up of a heavy ion layer coated with a proton layer on the rear surface.The results show that when the first layer is transparent induced by the hole-boring effect, the whole proton layer is accelerated by the transmitted laser pulse to high energy with low energy spread.The quality of the proton beam generated from a double-layer target is better than that from a single-layer target.The improvement is attributed to the flat top structure of the electrostatic field caused by the electrons injected into the second layer.It is easier to control the spectrum quality by using a double-layer target rather than using a single-layer one when the radiation pressure acceleration is dominant.

  18. Large-scale simulations of layered double hydroxide nanocomposite materials

    Science.gov (United States)

    Thyveetil, Mary-Ann

    Layered double hydroxides (LDHs) have the ability to intercalate a multitude of anionic species. Atomistic simulation techniques such as molecular dynamics have provided considerable insight into the behaviour of these materials. We review these techniques and recent algorithmic advances which considerably improve the performance of MD applications. In particular, we discuss how the advent of high performance computing and computational grids has allowed us to explore large scale models with considerable ease. Our simulations have been heavily reliant on computational resources on the UK's NGS (National Grid Service), the US TeraGrid and the Distributed European Infrastructure for Supercomputing Applications (DEISA). In order to utilise computational grids we rely on grid middleware to launch, computationally steer and visualise our simulations. We have integrated the RealityGrid steering library into the Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) 1 . which has enabled us to perform re mote computational steering and visualisation of molecular dynamics simulations on grid infrastruc tures. We also use the Application Hosting Environment (AHE) 2 in order to launch simulations on remote supercomputing resources and we show that data transfer rates between local clusters and super- computing resources can be considerably enhanced by using optically switched networks. We perform large scale molecular dynamics simulations of MgiAl-LDHs intercalated with either chloride ions or a mixture of DNA and chloride ions. The systems exhibit undulatory modes, which are suppressed in smaller scale simulations, caused by the collective thermal motion of atoms in the LDH layers. Thermal undulations provide elastic properties of the system including the bending modulus, Young's moduli and Poisson's ratios. To explore the interaction between LDHs and DNA. we use molecular dynamics techniques to per form simulations of double stranded, linear and plasmid DNA up

  19. Energy distribution of elastically scattered electrons from double layer samples

    Science.gov (United States)

    Tőkési, K.; Varga, D.

    2016-02-01

    We present a theoretical description of the spectra of electrons elastically scattered from thin double layered Au-C samples. The analysis is based on the Monte Carlo simulation of the recoil and Doppler effects in reflection and transmission geometries of the scattering at a fixed angle of 44.3 ° and a primary energy of 40 keV. The relativistic correction is taken into account. Besides the experimentally measurable energy distributions the simulations give many partial distributions separately, depending on the number of elastic scatterings (single, and multiple scatterings of different types). Furthermore, we present detailed analytical calculations for the main parameters of the single scattering, taking into account both the ideal scattering geometry, i.e. infinitesimally small angular range, and the effect of the real, finite angular range used in the measurements. We show our results for intensity ratios, peak shifts and broadenings for four cases of measurement geometries and layer thicknesses. While in the peak intensity ratios of gold and carbon for transmission geometries were found to be in good agreement with the results of the single scattering model, especially large deviations were obtained in reflection geometries. The separation of the peaks, depending on the geometry and the thickness, generally smaller, and the peak width generally larger than it can be expected from the nominal values of the primary energy, scattering angle, and mean kinetic energy of the atoms. We also show that the peaks are asymmetric even for the case of the single scattering due to the finite solid angle. Finally, we present a qualitative comparison with the experimental data. We find our resulting energy distribution of elastically scattered electrons to be in good agreement with recent measurements.

  20. Preferential Intercalation of Pyridinedicarboxylates into Layered Double Hydroxides

    Institute of Scientific and Technical Information of China (English)

    李蕾; 莫丹; 陈大舟

    2005-01-01

    Intercalation of 2,3-,2,4-,2,5-,2,6-,3,4-,or3,5-pyridincdicarboxylate into the layered double hydroxide (LDH),[Mg0.73AIo.27(OH)2](CO3)0.14*1.34H2O was carried out by the reconstruction method in the molar ratio of organic acid: calcined LDH=3:8, in 80% alcoholic aqueous solution at 70℃. Selective reaction was observed in com-petitive experiments involving an equal concentration pairs of acids. The preference order of the organic acids intercalated into the Mg-Al-LDH was found to be in the order of 2,3-pyridinedicarboxylate>2,5-pyridinedicarboxylate>2,4-pyridinedicarboxylate>3,5-pyridinedicarboxylate>3,4-pyridinedicarboxylate>2,6-pyridinedic arboxylate. The structures of the intercalates formed by the reaction of six guests with Mg-Al-LDH were characterized by X-ray diffraction, infrared and thermogravimetry techniques. And the charge density on the oxygens of each of the carboxylate groups for the six anions was investigated utilizing ab initio (HF/6-31G) method by G98w. From the X-ray diffraction data, the guest size and the charge density of the oxygens of the guest, the orientation of 2,3-,2,4-,2,5-,2,6-,3,4-, or 3,5-pyridinedicarboxylate anions between the layers was determined and the preferential intercalation mechanism was discussed. These results indicate the possibility of a molecular recognition ability of LDH and it would be exploited for the chemical separation of some anions from solution.

  1. Junction conditions in quadratic gravity: thin shells and double layers

    CERN Document Server

    Reina, Borja; Vera, Raül

    2015-01-01

    The junction conditions for the most general gravitational theory with a Lagrangian containing terms quadratic in the curvature are derived. We include the cases with a possible concentration of matter on the joining hypersurface -termed as thin shells, domain walls or braneworlds in the literature- as well as the proper matching conditions where only finite jumps of the energy-momentum tensor are allowed. In the latter case we prove that the matching conditions are more demanding than in General Relativity. In the former case, we show that generically the shells/domain walls are of a new kind because they possess, in addition to the standard energy-momentum tensor, a double layer energy-momentum contribution which actually induces an external energy flux vector and an external scalar pressure/tension on the shell. We prove that all these contributions are necessary to make the entire energy-momentum tensor divergence-free, and we present the field equations satisfied by these energy-momentum quantities. The ...

  2. Carbon aerogels for electric double-layer capacitors

    Institute of Scientific and Technical Information of China (English)

    ZHANG Lin; LIU Hongbo; WANG Ming; LIU Wei

    2006-01-01

    In this study, carbon aerogels were derived via the pyrolysis of resorcinol-formaldehyde (RF) aerogels, which were cost-effectively manufactured from RF wet gels by an ambient drying technique instead of conventional supercritical drying. By varying the R/C ratio (molar ratio of resorcinol to catalyst), mesoporous carbon aerogels with high specific surface area were prepared successfully and further investigated as electrode materials for electric double-layer capacitors (EDLCs). The textural properties of carbon aerogels obtained were characterized by nitrogen adsorption/desorption analysis and SEM. The electrochemical performances of carbon aerogels were investigated by impedance spectroscopy, galvanostatic charge/discharge and cyclic voltammetry methods. The results show that BET surface area and specific capacitance increase with R/C ratio, the maximum values of 727 m2·g-1 and 132 F·g-1 are achieved at R/C ratio will of 300. Increasing R/C ratio increase the average pore size of carbon aerogel electrode, which has improved the rate capability. Furthermore, EDLC with carbon aerogel electrodes has an excellent stability at large discharge current and long cycle life.

  3. Enhanced aerobic sludge granulation with layered double hydroxide

    Directory of Open Access Journals (Sweden)

    Jizhi Zhou

    2014-06-01

    Full Text Available Aerobic granular sludge technology has been developed for the biochemical treatment of wastewater in the present study. A fast cultivation of aerobic granular sludge was realized in Sequencing Batch Reactor (SBR, where Mg-Al layered double hydroxide (LDH was used as a carrier for granules growth. In comparison, the sludge particle size with LDH addition was bigger than those without LDH, with more than 50% of compact granular sludge >1.4 mm in size. This indicatestheLDH improved the growth ofthegranular sludge. The frequency of LDH addition had little effect on the granule growth. Moreover, the formation of granules led to the low sludge volume index (SVI and high mixed liquid suspended solids (MLSS in SBR reactor. With the formation of granular sludge, more than 80% of COD was removed in SBR reactor. The high COD removal efficiency of wastewater was observed regardless of various COD loading strength. The results suggest that the growth of granular sludge with LDH as a carrier enhanced the treatment efficiency. Therefore, our results have provided a promising way to prepare the granular sludge for wastewater treatment.

  4. Methotrexate intercalated ZnAl-layered double hydroxide

    Science.gov (United States)

    Chakraborty, Manjusha; Dasgupta, Sudip; Soundrapandian, Chidambaram; Chakraborty, Jui; Ghosh, Swapankumar; Mitra, Manoj K.; Basu, Debabrata

    2011-09-01

    The anticancerous drug methotrexate (MTX) has been intercalated into an ZnAl-layered double hydroxide (LDH) using an anion exchange technique to produce LDH-MTX hybrids having particle sizes in the range of 100-300 nm. X-ray diffraction studies revealed increases in the basal spacings of ZnAl-LDH-MTX hybrid on MTX intercalation. This was corroborated by the transmission electron micrographs, which showed an increase in average interlayer spacing from 8.9 Å in pristine LDH to 21.3 Å in LDH-MTX hybrid. Thermogravimetric analyses showed an increase in the decomposition temperature for the MTX molecule in the LDH-MTX hybrid indicating enhanced thermal stability of the drug molecule in the LDH nanovehicle. The cumulative release profile of MTX from ZnAl-LDH-MTX hybrids in phosphate buffer saline (PBS) at pH 7.4 was successfully sustained for 48 h following Rigter-Peppas model release kinetics via diffusion.

  5. Bionanocomposites based on layered double hydroxides as drug delivery systems

    Science.gov (United States)

    Aranda, Pilar; Alcântara, Ana C. S.; Ribeiro, Ligia N. M.; Darder, Margarita; Ruiz-Hitzky, Eduardo

    2012-10-01

    The present work introduces new biohybrid materials involving layered double hydroxides (LDH) and biopolymers to produce bionanocomposites, able to act as effective drug delivery systems (DDS). Ibuprofen (IBU) and 5-aminosalicylic acid (5-ASA) have been chosen as model drugs, being intercalated in a Mg-Al LDH matrix. On the one side, the LDHIBU intercalation compound prepared by ion-exchange reaction was blended with the biopolymers zein, a highly hydrophobic protein, and alginate, a polysaccharide widely applied for encapsulating drugs. On the other side, the LDH- 5-ASA intercalation compound prepared by co-precipitation was assembled to the polysaccharides chitosan and pectin, which show mucoadhesive properties and resistance to acid pH values, respectively. Characterization of the intercalation compounds and the resulting bionanocomposites was carried out by means of different experimental techniques: X-ray diffraction, infrared spectroscopy, chemical and thermal analysis, as well as optical and scanning electron microscopies. Data on the swelling behavior and drug release under different pH conditions are also reported.

  6. Immobilization of Penicillin G Acylase on Calcined Layered Double Hydroxides

    Institute of Scientific and Technical Information of China (English)

    REN Ling-ling; HE Jing; Evans D. G.; DUAN Xue

    2003-01-01

    A hydrotalcite-like Mg2+/Al3+ layered double hydroxide(LDH) material was prepared by means of a modified coprecipitation method involving a rapid mixing step followed by a separate aging process. LDH calcined at 500 ℃, denoted as CLDH, was characterized by XRD, IR and BET surface area measurements. CLDH has a poor crystalline MgO-like structure with a high surface area and porosity. CLDH was used as a support for the immobilization of penicillin G acylase(PGA). The effect of varying the immobilization conditions, such as pH, contact time and the ratio of enzyme to support, on the activity of the immobilized enzyme in the hydrolysis of penicillin G has been studied. It was found that the activity of the immobilized enzyme decreased slightly with decreasing pH and reached a maximum after a contact time of 24 h. The activity of the immobilized enzyme increased with increasing the ratio of enzyme to support. It was found that the adsorption of PGA inhibited the expected reaction of CLDH with an aqueous medium to regenerate a LDH phase. Its original activity(36%) after 15 cycles of reuse of the immobilized enzyme was retained, but no further loss in the activity was observed.

  7. Lubrication approximation in completed double layer boundary element method

    Science.gov (United States)

    Nasseri, S.; Phan-Thien, N.; Fan, X.-J.

    This paper reports on the results of the numerical simulation of the motion of solid spherical particles in shear Stokes flows. Using the completed double layer boundary element method (CDLBEM) via distributed computing under Parallel Virtual Machine (PVM), the effective viscosity of suspension has been calculated for a finite number of spheres in a cubic array, or in a random configuration. In the simulation presented here, the short range interactions via lubrication forces are also taken into account, via the range completer in the formulation, whenever the gap between two neighbouring particles is closer than a critical gap. The results for particles in a simple cubic array agree with the results of Nunan and Keller (1984) and Stoksian Dynamics of Brady etal. (1988). To evaluate the lubrication forces between particles in a random configuration, a critical gap of 0.2 of particle's radius is suggested and the results are tested against the experimental data of Thomas (1965) and empirical equation of Krieger-Dougherty (Krieger, 1972). Finally, the quasi-steady trajectories are obtained for time-varying configuration of 125 particles.

  8. Fast charging self-powered electric double layer capacitor

    Science.gov (United States)

    Parida, Kaushik; Bhavanasi, Venkateswarlu; Kumar, Vipin; Wang, Jiangxin; Lee, Pooi See

    2017-02-01

    Self-powered electrochemical energy storage devices, which store energy upon application of mechanical force, have emerged as a promising technology for the realization of autonomous systems for maintenance-free, independent and multifunctional operations. However, the existing state-of-the-art technology demonstrates slow self-charging due to slow Faradaic reactions and intercalation mechanism. Here, we report a fast self-charging, self-powered electrochemical energy storage device owing to the formation of an electric double layer with fast adsorption and desorption of ions at the carbon nanotube (CNT) electrode upon application of mechanical force. The device charges up to 70 mV from the open-circuit potential, storing a capacitance of 95 μFcm-2 upon application of a mechanical pressure of 70 N at a frequency of 5 Hz. More importantly, it takes less than 10 s to achieve 90% of the increment in the potential (60 mV), which is more than one order of magnitude faster than all of the previously reported self-powered energy storage devices.

  9. Novel synthesis of layered double hydroxides (LDHs) from zinc hydroxide

    Science.gov (United States)

    Meng, Zilin; Zhang, Yihe; Zhang, Qian; Chen, Xue; Liu, Leipeng; Komarneni, Sridhar; Lv, Fengzhu

    2017-02-01

    The most common synthesis methods for layered double hydroxides (LDHs) are co-precipitation and reconstruction, which can have some limitations for application. Here, we report a novel synthesis method for LDHs. We use zinc hydroxide as the precursor to synthesize LDHs phase through a simple transformation process of zinc hydroxide phase. For this transformation process, aluminum can enter into zinc hydroxide and replace zinc quickly to transform it into LDH by creating positive charges in the zinc hydroxide solid phase. The mechanism of LDH formation was through Al3+ reaction first with zinc hydroxide followed by recrystallization of the original structure of zinc hydroxide. Thus, the new process of LDH formation involves a reaction of Al to substitute for Zn and recrystallization leading to LDH and the final pH influences the crystallization of LDHs by this process. In addition, Cr3+ was employed as a trivalent cation for LDH formation to react with zinc hydroxide, which also led to LDH structure.

  10. Experimental investigation of double layers in expanding plasmas

    CERN Document Server

    Plihon, N; Corr, C S

    2015-01-01

    Double layers (DLs) have been observed in a plasma reactor composed of a source chamber attached to a larger expanding chamber. Positive ion beams generated across the DL were characterized in the low plasma potential region using retarding field energy analyzers. In electropositive gases, DLs were formed at very low pressures between 0.1 and 1 mTorr with the plasma expansion forced by a strongly diverging magnetic field. The DL remains static, robust to changes in boundary conditions, and its position is related to the magnetic field lines. The voltage drop across the DL increases with decreasing pressure, i.e., with increasing electron temperature around 20 V at 0.17 mTorr. DLs were also observed in electronegative gases without a magnetic field over a greater range of pressure 0.5 to 10 mTorr. The actual profile of the electronegative DL is very sensitive to external parameters and intrusive elements, and they propagate at high negative ion fraction. Electrostatic probes measurements and laser-induced phot...

  11. Junction conditions in quadratic gravity: thin shells and double layers

    Science.gov (United States)

    Reina, Borja; Senovilla, José M. M.; Vera, Raül

    2016-05-01

    The junction conditions for the most general gravitational theory with a Lagrangian containing terms quadratic in the curvature are derived. We include the cases with a possible concentration of matter on the joining hypersurface—termed as thin shells, domain walls or braneworlds in the literature—as well as the proper matching conditions where only finite jumps of the energy-momentum tensor are allowed. In the latter case we prove that the matching conditions are more demanding than in general relativity. In the former case, we show that generically the shells/domain walls are of a new kind because they possess, in addition to the standard energy-momentum tensor, a double layer energy-momentum contribution which actually induces an external energy flux vector and an external scalar pressure/tension on the shell. We prove that all these contributions are necessary to make the entire energy-momentum tensor divergence-free, and we present the field equations satisfied by these energy-momentum quantities. The consequences of all these results are briefly analyzed.

  12. Finite-Thickness and Charge Relaxation in Double-Layer Interactions

    NARCIS (Netherlands)

    Torres, A.; Roij, R. van; Téllez, G.

    2006-01-01

    We extend the classical Gouy-Chapman model of two planar parallel interacting double-layers, which is used as a first approximation to describe the force between colloidal particles, by considering the finitethickness of the colloids. The formation of two additional double layers due to this finite

  13. Finite-Thickness and Charge Relaxation in Double-Layer Interactions

    NARCIS (Netherlands)

    Torres, A.; Roij, R. van; Téllez, G.

    2006-01-01

    We extend the classical Gouy-Chapman model of two planar parallel interacting double-layers, which is used as a first approximation to describe the force between colloidal particles, by considering the finitethickness of the colloids. The formation of two additional double layers due to this

  14. The electric double layer put to work : thermal physics at electrochemical interfaces

    NARCIS (Netherlands)

    Janssen, M.A.

    2017-01-01

    Where charged electrode surfaces meet fluids that contain mobile ions, so-called electric double layers (EDLs) form to screen the electric surface charge by a diffuse cloud of counterionic charge in the fluid phase. This double layer has been studied for over a century and is of paramount importance

  15. Experimental validation of sound field control with a circular double-layer array of loudspeakers

    DEFF Research Database (Denmark)

    Chang, Jiho; Jacobsen, Finn

    2013-01-01

    This paper is concerned with experimental validation of a recently proposed method of controlling sound fields with a circular double-layer array of loudspeakers [Chang and Jacobsen, J. Acoust. Soc. Am. 131(6), 4518-4525 (2012)]. The double-layer of loudspeakers is realized with 20 pairs of closed-box...

  16. Layered double hydroxide stability. 2. Formation of Cr(III)-containing layered double hydroxides directly from solution

    Science.gov (United States)

    Boclair, J. W.; Braterman, P. S.; Jiang, J.; Lou, S.; Yarberry, F.

    1999-01-01

    Solutions containing divalent metal [M(II) = Mg2+, Zn2+, Co2+, Ni2+, Mn2+] chlorides and CrCl3 6H2O were titrated with NaOH to yield, for M(II) = Zn, Co, and Ni, hydrotalcite-like layered double hydroxides (LDHs), [[M(II)]1-z[Cr(III)]z(OH)2][Cl]z yH2O, in a single step, without intermediate formation of chromium hydroxide. Analysis of the resultant titration curves yields solubility constants for these compounds. These are in the order Zn < Ni approximately Co, with a clear preference for formation of the phase with z = 1/3. With Mg2+ as chloride, titration gives a mixture of Cr(OH)3 and Mg(OH)2, but the metal sulfates give Mg2Cr(OH)6 1/2(SO4) by a two-step process. Titrimetric and spectroscopic evidence suggests short-range cation order in the one-step LDH systems.

  17. Development of polymer nanocomposites based on layered double hydroxides

    Directory of Open Access Journals (Sweden)

    Sipusic, J.

    2009-05-01

    Full Text Available Polymeric nanocomposites are commonly considered as systems composed of a polymeric matrix and - usually inorganic - filler. The types of nanofillers are indicated in Fig. 1. Beside wellknown layered silicate fillers, recent attention is attracted to layered double hydroxide fillers (LDH, mainly of synthetic origin. The structure of LDH is based on brucite, or magnesium hydroxide, Mg(OH2 and is illustrated in Fig. 2. The modification of LDHs is commonly done by organic anions, to increase the original interlayer distance and to improve the organophilicity of the filler, keeping in mind their final application as fillers for, usually hydrophobic, polymer matrices. We have used the modified rehydration procedure for preparing organically modified LDH. The stoichiometric quantities of Ca33Al2O6, CaO and benzoic (B (or undecenoic (U acid were mixed with water and some acetone. After long and vigorous shaking, the precipitated fillers were washed, dried and characterized. X-ray diffraction method (XRD has shown the increase of the original interlayer distance for unmodified LDH (OH–-saturated of 0.76 nm to the 1.6 nm in LDH-B or LDH-U fillers (Fig. 3. Infrared spectroscopy method (FTIR has confirmed the incorporation of benzoic anion within the filler layers (Fig. 4. For the preparation of LDH-B and LDH-U composites with polystyrene (PS, poly(methyl methacrylate (PMMA and copolymer (SMMA matrices, a two-step in situ bulk radical polymerization was selected (Table 1 for recipes, azobisisobutyronitrile as initiator, using conventional stirred tank reactor in the first step, and heated mold with the movable wall (Fig. 6 in the second step of polymerization. All the prepared composites with LDH-U fillers were macroscopically phase-separated, as was the PMMA/LDH-B composite.PS/LDH-B and SMMA/LDH-B samples were found to be transparent and were further examined for deduction of their structure (Fig. 5 and thermal properties. FTIR measurements showed that

  18. Does the plasma radiate near a Double Layer?

    Science.gov (United States)

    Pottelette, Raymond; Berthomier, Matthieu; Pickett, Jolene

    2016-04-01

    Earth is an intense radio source in the kilometer wavelength range. Being a direct consequence of the parallel acceleration processes taking place in the Earth's auroral region, the radiation contains fundamental information on the characteristic spatial and temporal scales of the turbulent accelerating layer. It is now widely assumed that the cyclotron maser instability leads to Auroral Kilometric Radiation (AKR) generation. It has been suggested from the FAST measurements that the AKR results from a so-called horseshoe electron distribution. This distribution is generated when a localized parallel electric field - called Double Layer (DL) - accelerates earthward the electrons that propagate into an increasing magnetic field. The magnetic moment of the electrons is conserved so that their pitch angle is increased. This results in the creation of a horseshoe-like shape for the electron distribution exhibiting large positive velocity gradients in the direction perpendicular to B, thereby providing free energy for the AKR generation which takes place at the local electron gyrofrequency. In these circumstances, the radiation is generated far away (several thousand kilometers) from a DL, because the parallel accelerated electrons need to travel a long distance before forming a horseshoe distribution. From an experimental point of view, it is not an easy task to highlight the presence of DLs, because they are moving transient structures so that high time resolution measurements are needed. A detailed analysis suggests that these large-amplitude parallel electric fields are located inside sharp density gradients at the interface separating the cold, dense ionospheric plasma from the hot, tenuous magnetospheric plasma. We present some FAST observations which illustrate the generation of elementary radiation events in the neighborhood of a DL. The events occur 10 to 20% above the local electron gyrofrequency in association with the presence of nonlinear coherent structures

  19. Development of high energy density electrical double layer capacitors

    Science.gov (United States)

    Devarajan, Thamarai selvi

    Electrochemical Double Layer capacitors (EDLCs) have shown themselves as a viable energy storage alternative. EDLCs have high power density, faster charge/discharge, wide operating temperature and long cycle life compared to batteries since it stores charge by physical separation. Despites all their advantages, their low energy density stand as a bottleneck for capacitors. This research aims to increase the energy density of EDLC without compromising the power density. Energy is proportional to the square of cell voltage. Cell voltage is mainly dependent on electrolyte breakdown. Electrolytes also provide ions for charge separation and conduction. Therefore various electrolytes (Solutes and Solvents) which can give high concentration, solubility and decomposition potential were characterized in the first part of the research. In that study, a novel ionic liquid OPBF4 had higher capacitance and comparable voltage window compared to commercial TEABF4 in Acetonitrile. However, the increased polarity of the fixed ring O-atom and the ion-ion interaction in OPBF4 was responsible for lowering its conductivity. Oxygenated ionic compounds with alkyl groups had lower stability due to beta elimination between two electron withdrawing atoms. Volume based thermodynamics and quantum chemical calculations were used to calculate ion size, HOMO/LUMO energies, and free energy changes and establish relationship with capacitance, redox potential and melting points respectively. In addition free energy of fusion was used to predict the melting point. Ion size had correlation with capacitance due to compact double layer formation. Free energy changes did not explain the differences in melting point and predicted dielectric constant was inconsistent with the polarity. This is presumably due to using Van der Waals volume instead of crystal structure volume and insufficient incorporation of polarization term. The HOMO/LUMO energies gave direct relation between oxidation and reduction

  20. Photo-oxidation of EPDM/layered double hydroxides composites: Influence of layered hydroxides and stabilizers

    Directory of Open Access Journals (Sweden)

    2007-11-01

    Full Text Available The photo-oxidation of ethylene propylene diene monomer (EPDM/ layered double hydroxide (LDH composites as well as EPDM/LDH with stabilizers is studied under accelerated UV irradiation (λ≥290 nm at 60°C for different time intervals. The development of functional groups during oxidation was monitored by FT-IR spectroscopy. The photodegradation of the pristine polymer and composites take place and the increase in hydroxyl and carbonyl groups with irradiation times, was estimated. EPDM filled LDH showed higher degradation rate than pristine EPDM, while in acidic medium EPDM/LDH showed almost equal degradation as in isolated conditions. These results show the advantages of LDHs as a filler as well as an acid killer. The effect of stabilizers is very less because of their concentration in comparison of LDH.

  1. Vertically aligned carbon nanotubes/diamond double-layered structure for improved field electron emission stability

    Energy Technology Data Exchange (ETDEWEB)

    Yang, L., E-mail: qiaoqin.yang@mail.usask.ca; Yang, Q.; Zhang, C.; Li, Y.S.

    2013-12-31

    A double-layered nanostructure consisting of a layer of vertically aligned Carbon Nanotubes (CNTs) and a layer of diamond beneath has been synthesized on silicon substrate by Hot Filament Chemical Vapor Deposition. The synthesis was achieved by first depositing a layer of diamond on silicon and then depositing a top layer of vertically aligned CNTs by applying a negative bias on the substrate holder. The growth of CNTs was catalyzed by a thin layer of spin-coated iron nitride. The surface morphology and structure of the CNTs/diamond double-layered structure were characterized by Scanning Electron Microscope, Energy Dispersive X-ray spectrum, and Raman Spectroscopy. Their field electron emission (FEE) properties were measured by KEITHLEY 237 high voltage measurement unit, showing much higher FEE current stability than single layered CNTs. - Highlights: • A new double-layered nanostructure consisting of a layer of vertically aligned CNTs and a layer of diamond beneath has been synthesized by hot filament chemical vapor deposition. • This double-layered structure exhibits superior field electron emission stability. • The improvement of emission stability is due to the combination of the unique properties of diamond and CNTs.

  2. Enhanced charge separation and oxidation kinetics of BiVO4 photoanode by double layer structure

    Science.gov (United States)

    Yang, Lin; Xiong, Yuli; Dong, Hongmei; Peng, Huarong; Zhang, Yunhuai; Xiao, Peng

    2017-03-01

    Monoclinic bismuth vanadate (BiVO4) is a promising semiconductor for photoelectrochemical water splitting. Here, we developed a facile fabrication of BiVO4 double layer photoanode on the fluorine-doped tin oxide substrate by electrodeposition. The BiVO4 double layer photoanode is composed by a dense BiVO4 film as the inner layer and a nanoporous BiVO4 film as the outer layer. Compared to the BiVO4 single layer photoanode, the optimized BiVO4 double layer photoanode produced a much higher photocurrent of 1.15 mA/cm2 at 0.6 V vs. Ag/AgCl under AM 1.5G (100 mW/cm2) illumination. The results of the photoelectric conversion kinetics for different samples revealed that the charge separation and oxidation kinetics efficiencies for the BiVO4 double layer are 47.2% and 51.6% at 0.6 V vs. Ag/AgCl, while the values for BiVO4 single layer are 32.3% and 35.8%, respectively. The improved photoelectrochemical performance for BiVO4 double layer is mainly ascribed to the decrease of defect state at the interface after inserting a dense BiVO4 as an inner layer to prevent the recombination of photogenerated electron-hole pairs.

  3. Electrochemical Double Layered Capacitor Development and Implementation System

    Science.gov (United States)

    Strunk, Gavin P.

    Electrochemical Double Layered Capacitors (EDLC's) are becoming a more popular topic of research for hybrid power systems, especially vehicles. They are known for their high power density, high cycle life, low internal resistance, and wider operating temperature compared to batteries. They are rarely used as a standalone power source; however, because of their lack of energy density compared to batteries and fuel cells. Researchers are now discovering the benefits of using them in hybrid systems. The increased complexity of a hybrid power source presents many challenges. A major drawback of this complexity is the lack of design tools to assist a designer in translating a simulation all the way to a full scale implementation. A full spectrum of tools was designed to assist designers at all stages of implementation including: single cell testing, a multi-cell management system, and a full scale vehicle data acquisition system to monitor performance. First, the full scale vehicle data acquisition is described. The system is isolated from the electric shuttle bus it was tested on to allow the system to be ported to other vehicles and applications. This was done to modularize the system to characterize a wide variety of full scale applications. Next, a single cell test system was designed that allows the designer to characterize cell specifications, as well as, test control and safety systems in a controlled environment. The goal is to ensure safety systems can be thoroughly tested to ensure robustness as the bank is scaled up. This system also includes simulation models that provide examples of using the simulation to predict the behavior of a cell and the test system to validate the results of the simulation. This information is then used by the designer to more effectively design sensor ranges for the bank. Finally, a multi-cell EDLC management system was designed to implement a bank. It incorporates 12 series EDLC cells per control module, and the modular design

  4. Mesoporous layer-by-layer ordered nanohybrids of layered double hydroxide and layered metal oxide: highly active visible light photocatalysts with improved chemical stability.

    Science.gov (United States)

    Gunjakar, Jayavant L; Kim, Tae Woo; Kim, Hyo Na; Kim, In Young; Hwang, Seong-Ju

    2011-09-28

    Mesoporous layer-by-layer ordered nanohybrids highly active for visible light-induced O(2) generation are synthesized by self-assembly between oppositely charged 2D nanosheets of Zn-Cr-layered double hydroxide (Zn-Cr-LDH) and layered titanium oxide. The layer-by-layer ordering of two kinds of 2D nanosheets is evidenced by powder X-ray diffraction and cross-sectional high resolution-transmission electron microscopy. Upon the interstratification process, the original in-plane atomic arrangements and electronic structures of the component nanosheets remain intact. The obtained heterolayered nanohybrids show a strong absorption of visible light and a remarkably depressed photoluminescence signal, indicating an effective electronic coupling between the two component nanosheets. The self-assembly between 2D inorganic nanosheets leads to the formation of highly porous stacking structure, whose porosity is controllable by changing the ratio of layered titanate/Zn-Cr-LDH. The resultant heterolayered nanohybrids are fairly active for visible light-induced O(2) generation with a rate of ∼1.18 mmol h(-1) g(-1), which is higher than the O(2) production rate (∼0.67 mmol h(-1) g(-1)) by the pristine Zn-Cr-LDH material, that is, one of the most effective visible light photocatalysts for O(2) production, under the same experimental condition. This result highlights an excellent functionality of the Zn-Cr-LDH-layered titanate nanohybrids as efficient visible light active photocatalysts. Of prime interest is that the chemical stability of the Zn-Cr-LDH is significantly improved upon the hybridization, a result of the protection of the LDH lattice by highly stable titanate layer. The present findings clearly demonstrate that the layer-by-layer-ordered assembly between inorganic 2D nanosheets is quite effective not only in improving the photocatalytic activity of the component semiconductors but also in synthesizing novel porous LDH-based hybrid materials with improved chemical

  5. RESISTANCE EFFECT OF ELECTRIC DOUBLE LAYER ON LIQUID FLOW IN MICROCHANNEL

    Institute of Scientific and Technical Information of China (English)

    GONG Lei; WU Jian-kang

    2006-01-01

    Poisson-Boltzmann equation for EDL (electric double layer) and NavierStokes equation for liquid flows were numerically solved to investigate resistance effect of electric double layer on liquid flow in microchannel. The dimension analysis indicates that the resistance effect of electric double layer can be estimated by an electric resistance number, which is proportional to the square of the liquid dielectric constant and the solid surface zeta potential, and inverse-proportional to the liquid dynamic viscosity, electric conductivity and the square of the channel width. An "electric current density balancing" (ECDB) condition was proposed to evaluate the flow-induced streaming potential,instead of conventional "electric current balancing" (ECB) condition which may induce spurious local backflow in neighborhood of the solid wall of the microchannel. The numerical results of the flow rate loss ratio and velocity profile are also given to demonstrate the resistance effect of electric double layer in microchannel.

  6. Unravelling the electrochemical double layer by direct probing of the solid/liquid interface

    Science.gov (United States)

    Favaro, Marco; Jeong, Beomgyun; Ross, Philip N.; Yano, Junko; Hussain, Zahid; Liu, Zhi; Crumlin, Ethan J.

    2016-08-01

    The electrochemical double layer plays a critical role in electrochemical processes. Whilst there have been many theoretical models predicting structural and electrical organization of the electrochemical double layer, the experimental verification of these models has been challenging due to the limitations of available experimental techniques. The induced potential drop in the electrolyte has never been directly observed and verified experimentally, to the best of our knowledge. In this study, we report the direct probing of the potential drop as well as the potential of zero charge by means of ambient pressure X-ray photoelectron spectroscopy performed under polarization conditions. By analyzing the spectra of the solvent (water) and a spectator neutral molecule with numerical simulations of the electric field, we discern the shape of the electrochemical double layer profile. In addition, we determine how the electrochemical double layer changes as a function of both the electrolyte concentration and applied potential.

  7. Characterization of Microporous Activated Carbon Electrodes for Electric Double-layer Capacitors

    Institute of Scientific and Technical Information of China (English)

    MENG Qing-han; LIU Ling; SONG Huai-he

    2004-01-01

    Activated carbons (ACs) with a wide range of surface areas were made from petroleum coke by means of KOH activation. The electrochemical characterization was carried out for several activated carbons used as polariz able electrodes of electric double-layer capacitors (EDLCs) in an aqueous electrolytic solution. The porous structures and electrochemical double-layer capacitance of the activated carbons were investigated by virtue of nitrogen gas adsorption and constant current cycling(CCC) methods. The relationship among the surface area, pore volume of the activated carbons and specific double-layer capacitance was discussed. It was found that the specific capacitance of ACs increased linearly with the increase of surface area. The presence of mesopores in the activated carbons with very high surface area(>2000 m2/g) was not very effective for them to be used as EDLCs. The influence of chemical characteristics of the activated carbons on the double layer formation could be considered to be negligible.

  8. Layered double hydroxides as containers of inhibitors in organic coatings for corrosion protection of carbon steel

    OpenAIRE

    Hang, To Thi Xuan; Truc, Trinh Anh; Duong, Nguyen Thuy; Pébère, Nadine; Olivier, Marie-Georges

    2012-01-01

    International audience; The present work focuses on the use of layered double hydroxides (LDH) as containers for corrosion inhibitors in an epoxy coating. 2-Benzothiazolylthio-succinic acid (BTSA), used as corrosion inhibitor, was intercalated by co-precipitation in magnesium-aluminum layered double hydroxides. The obtained LDH-BTSA was characterized by infrared spectroscopy, X-ray diffraction and scanning electron microscopy. BTSA release from LDH-BTSA in NaCl solutions was investigated by U...

  9. Mixing Acid Salts and Layered Double Hydroxides in Nanoscale under Solid Condition

    OpenAIRE

    2014-01-01

    The immobilization of potassium sorbate, potassium aspartate and sorbic acid in layered double hydroxide under solid condition was examined. By simply mixing two solids, immobilization of sorbate and aspartate in the interlayer space of nitrate-type layered double hydroxide, so called intercalation reaction, was achieved, and the uptakes, that is, the amount of immobilized salts and the interlayer distances of intercalation compounds were almost the same as those obtained in aqueous solution...

  10. Double-layer-gate architecture for few-hole GaAs quantum dots

    Science.gov (United States)

    Wang, D. Q.; Hamilton, A. R.; Farrer, I.; Ritchie, D. A.; Klochan, O.

    2016-08-01

    We report the fabrication of single and double hole quantum dots using a double-layer-gate design on an undoped accumulation mode {{Al}}x{{Ga}}1-x{As}/GaAs heterostructure. Electrical transport measurements of a single quantum dot show varying addition energies and clear excited states. In addition, the two-level-gate architecture can also be configured into a double quantum dot with tunable inter-dot coupling.

  11. Influence of binder solvent on carbon-layer structure in electrical-double-layer capacitors

    Indian Academy of Sciences (India)

    A Banerjee; P Suresh Kumar; A K Shukla

    2013-09-01

    Porous activated-carbons with a large surface-area have been the most common materials for electrical-double-layer capacitors (EDLCs). These carbons having a wide pore distribution ranges from micropores to macropores in conjunction with a random pore connection that facilitates the high specific-capacitance values. Pore distribution plays a central role in controlling the capacitance value of EDLCs, since electrolyte distribution inside the active material mainly depends on the pore distribution. This has a direct influence on the distribution of resistance and capacitance values within the electrode. As a result, preparation of electrodes remains a vital issue in realising high-performance EDLCs. Generally, carbon materials along with some binders are dispersed into a solvent and coated onto the current collectors. This study examines the role of binder solvents used for the carbon-ink preparation on the microstructure of the electrodes and the consequent performance of the EDLCs. It is observed that the physical properties of the binder solvent namely its dielectric constant, viscosity and boiling point have important role in determining the pore-size distribution as well as the microstructure of electrodes which influence their specific capacitance values.

  12. Anomalous double layer step formation on Si(100) in hydrogen ambient

    Energy Technology Data Exchange (ETDEWEB)

    Doescher, Henning; Kleinschmidt, Peter; Dobrich, Anja; Brueckner, Sebastian; Supplie, Oliver; Luczak, Johannes; Hannappel, Thomas [Helmholtz-Zentrum Berlin fuer Materialien und Energie, Berlin (Germany)

    2011-07-01

    Generation of double layer steps on Si(100) is desirable for subsequent anti-phase domain-free heteroepitaxy of III-V semiconductors. In UHV established procedures exist for the formation of double layer steps at the clean Si(100) surface. In the (metal-organic) vapour phase epitaxy environment the situation is more complicated due to the presence of hydrogen in the process ambient. Both theory and experiment of the hydrogenated surfaces suggest that under equilibrium conditions no preference for double layer steps is to be expected. Previously, we have shown that annealing in hydrogen at near atmospheric pressure leads to termination of the surface by monohydride. Here, we show that a process using Si(100) with an intermediate offcut of 2 in <011> can lead to a double layer stepped surface. Our process consists of deoxidation, homoepitaxial growth employing silane, annealing and slow cooling to 500 C in hydrogen ambient. We observe the formation of double layer steps using Fourier-transform infrared spectroscopy, low-energy electron diffraction and scanning tunneling microscopy. In sharp contrast to established UHV results, the double layer steps are of the D{sub A} type, where dimer rows of the reconstructed surface are parallel to the step edges.

  13. Thermal analysis of double-layer metal films during femtosecond laser heating

    Science.gov (United States)

    Chen, A. M.; Jiang, Y. F.; Sui, L. Z.; Liu, H.; Jin, M. X.; Ding, D. J.

    2011-05-01

    In this paper, the primary interest is the heat effect of the bottom-layer metal on the temperature distribution of the top-layer metal in a double-layer metal structure during femtosecond laser irradiation. The evolution of the surface electron and lattice temperature depends a lot on the thermal parameters of the substrate. The damage threshold can be increased by using a substrate material with high electron-lattice coupling factor. Next, we choose chrome as the bottom-layer material. The results of modeling show that the surface lattice temperature of top-layer gold can be reduced remarkably. For a fixed entire thickness of the double-layer film, there is an optimal proportion of top and bottom layers for which the damage threshold is the highest possible. Also, for increasing the damage threshold, a substrate with higher melting temperature should be chosen.

  14. Patch holography using a double layer microphone array

    DEFF Research Database (Denmark)

    Gomes, Jesper Skovhus

    in which the sound field is represented by a set of monopoles placed inside the source. In this paper these monopoles are distributed so that they surround the array, and the reconstruction is compared with the IBEM-based approach. The comparisons are based on computer simulations with a planar double...

  15. Double layers at amphifunctionally electrified interfaces in the presence of electrolytes containing specifically adsorbing ions

    NARCIS (Netherlands)

    Duval, J.F.L.; Kleijn, J.M.; Lyklema, J.; Leeuwen, van H.P.

    2002-01-01

    Amphifunctional double layers are defined by the coupling of electronic and ionic surface charging processes. They may be present at interfaces of the type metal | oxide layer | solution or semiconducting oxide | solution. In the present paper, the simultaneous effects of charge-determining ions H+/

  16. Mg/Al Ordering in Layered Double Hydroxides Revealed by Multinuclear NMR Spectroscopy

    DEFF Research Database (Denmark)

    Nielsen, Ulla Gro; Grey, Clare P.; Sideris, Paul J.

    2008-01-01

    The anion- exchange ability of layered double hydroxides ( LDHs) has been exploited to create materials for use in catalysis, drug delivery, and environmental remediation. The specific cation arrangements in the hydroxide layers of hydrotalcite- like LDHs, of general formula Mg1-x2+Alx3+OH2(Anion...

  17. Study of the Electrical Double Layer of a Spherical Micelle:Functional Theoretical Approach

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    By using the iterative method in functional theory, an analytic expression of the Poisson-Boltzmann equation (PB eq.), which describes the distribution of the potential of electrical double layer of a spherical micelle, has been carried out under the general potential condition for the first time. The method also can give the radius, the surface potential, and the thickness of the layer.

  18. Fracture Characteristics Analysis of Double-layer Rock Plates with Both Ends Fixed Condition

    Directory of Open Access Journals (Sweden)

    S. R. Wang

    2014-07-01

    Full Text Available In order to research on the fracture and instability characteristics of double-layer rock plates with both ends fixed, the three-dimension computational model of double-layer rock plates under the concentrated load was built by using PFC3D technique (three-dimension particle flow code, and the mechanical parameters of the numerical model were determined based on the physical model tests. The results showed the instability process of the double-layer rock plates had four mechanical response phases: the elastic deformation stage, the brittle fracture of upper thick plate arching stage, two rock-arch bearing stage and two rock-arch failure stage; moreover, with the rock plate particle radius from small to large change, the maximum vertical force of double rock-arch appeared when the particle size was a certain value. The maximum vertical force showed an upward trend with the increase of the rock plate temperature, and in the case of the same thickness the maximum vertical force increased with the increase of the upper rock plate thickness. When the boundary conditions of double-layer rock plates changed from the hinged support to the fixed support, the maximum horizontal force observably decreased, and the maximum vertical force showed small fluctuations and then tended towards stability with the increase of cohesive strength of double-layer rock plates.

  19. Double-layered target and identification method of individual target correlated with evaporation residues

    Energy Technology Data Exchange (ETDEWEB)

    Kaji, D., E-mail: daiya@riken.jp; Morimoto, K.

    2015-08-21

    A double-layered target system and an identification method (target ID) for individual targets mounted on a rotating wheel using correlation with evaporation residues were newly developed for the study of superheavy elements (SHE). The target system can be used in three modes: conventional single-layered mode, double-layered mode, and energy-degrader mode. The target ID method can be utilized for masking a target, measuring an excitation function without changing the beam energy from the accelerator, and searching for SHE nuclides using multiple targets during a single irradiation.

  20. Wrinkle Behavior of Hydroforming of Aluminum Alloy Double-Layer Sheets

    Science.gov (United States)

    Zhou, Bin-Jun; Xu, Yong-Chao

    2016-07-01

    In this article, the wrinkling behavior and thickness distribution of 5A06 aluminum alloy sheets in an annealed state with thickness of 1.0 mm and 2.5 mm was numerically and experimentally investigated under different hydraulic pressures in the hydroforming of single-layer and double-layer sheets. Note that, in double-layer sheets hydroforming, an upper-aided sheet is needed. The upper, thicker sheet synchronously deforms with the lower, thinner sheet during hydroforming. When the double-layer sheets are separated, a thinner curved sheet part will be manufactured. As can be seen from the simulation and experimental results, the upper, thicker sheet could effectively suppress the wrinkles of the lower, thinner sheet and improve the thickness distribution due to the increasing anti-wrinkle ability of the formed sheet and the interfacial friction between the double-layer sheets. In addition, the maximum hydraulic pressure can be decreased via hydroforming of double-layer sheets; this approach reduces the drawing force for large sheet parts and meets the requirement of energy conservation.

  1. Laser ion acceleration from a double-layer metal foil

    Energy Technology Data Exchange (ETDEWEB)

    Lecz, Zsolt

    2013-11-12

    The laser-ion acceleration with ultra-intense and ultra-short laser pulses has opened a new field of accelerator physics over the last decade. Fast development in laser systems are capable of delivering short pulses of a duration of a few hundred femtoseconds at intensities between 10{sup 18}-10{sup 20} W/cm{sup 2}. At these high intensities the laser-matter interaction induces strong charge separation, which leads to electric fields exceeding the acceleration gradients of conventional devices by 6 orders of magnitude. The particle dynamics and energy absorption of the laser pulse can be understood by means of high-performance simulation tools. In the framework of the LIGHT (Laser Ion Generation, Handling and Transport) project our goal is to provide an analytical description of the 3D distribution of the protons accelerated via TNSA (Target Normal Sheath Acceleration). In this acceleration mechanism the short pulse impinging on a metal foil heats the electrons to relativistic energies, which triggers the strong charge separation field on the opposite target surface (Debye-sheath). The accelerated light ions (proton, carbon, oxygen) observed in the experiments originate from the contamination layer deposited on the surface. The thickness of this layer in the experiments is not known exactly. According to our study these ions can be accelerated in three different regimes depending on layer thickness: quasi-static acceleration (QSA, for thin layers), plasma expansion (for thick layers) and a not well understood intermediate (or combined) regime. In a laser-plasma simulations time-dependent hot electron density and temperature are observed, therefore we performed plasma simulations with a well defined and constant initial hot electron distribution. Thus the simulation results are easier to compare with analytical models. In our case the theoretical investigation of the TNSA involves the understanding of the charge separation effects at the surface of a two

  2. High Corrosion-Resistance Double-Layer Ni-P Coating on Steels

    Institute of Scientific and Technical Information of China (English)

    JIANG Hai; LIU Xian-li; JIANG Zhang-hao; LI Guang-yu; LIAN Jian-she; GU Chang-dong

    2004-01-01

    Double-layer Ni-P alloy coating with a thickness about 20 μm and different Ni-P layers was prepared by electroless deposition and its corrosion resistance was studied. The microstructure and corrosion-resistance of the coatings were analyzed by SEM, XRD, electrochemical polarization measurements and salt spray tests. The salt spray tests showed that the double-layer coating exhibits better corrosion resistance. The time of the emergence of the first red rust spot on the coating surface can reach 384 hours, and the gray rusts were firstly emergered during the salt spray tests. The electrochemical analysis revealed that the difference in the corrosion potential between the double layers plays a very important role in protecting the substrate from rusting.

  3. NUMERICAL MODELING OF THE PROBLEM OF DOUBLE-LAYER REINFORCEMENT

    Directory of Open Access Journals (Sweden)

    Nizomov Dzhakhongir Nizomovich

    2012-10-01

    The proposed solution is applicable in the lining of tunnels and subterranean structures in rock massifs, as well as galleries arranged in the body of earth dams. It represents two layers of concrete with different values of the modulus of elasticity and Poisson ratio. Tangential stress and reinforcement ring graphs are presented in the article.

  4. Improved Reliability of Small Molecule Organic Solar Cells by Double Anode Buffer Layers

    Directory of Open Access Journals (Sweden)

    Pao-Hsun Huang

    2014-01-01

    Full Text Available An optimized hybrid planar heterojunction (PHJ of small molecule organic solar cells (SM-OSCs based on copper phthalocyanine (CuPc as donor and fullerene (C60 as acceptor was fabricated, which obviously enhanced the performance of device by sequentially using both MoO3 and pentacene as double anode buffer layers (ABL, also known as hole extraction layer (HEL. A series of the vacuum-deposited ABL, acting as an electron and exciton blocking layer, were examined for their characteristics in SM-OSCs. The performance and reliability were compared between conventional ITO/ABL/CuPc/C60/BCP/Ag cells and the new ITO/double ABL/CuPc/C60/BCP/Ag cells. The effect on the electrical properties of these materials was also investigated to obtain the optimal thickness of ABL. The comparison shows that the modified cell has an enhanced reliability compared to traditional cells. The improvement of lifetime was attributed to the idea of double layers to prevent humidity and oxygen from diffusing into the active layer. We demonstrated that the interfacial extraction layers are necessary to avoid degradation of device. That is to say, in normal temperature and pressure, a new avenue for the device within double buffer layers has exhibited the highest values of open circuit voltage (Voc, fill factor (FF, and lifetime in this work compared to monolayer of ABL.

  5. Double Charged Surface Layers in Lead Halide Perovskite Crystals

    KAUST Repository

    Sarmah, Smritakshi P.

    2017-02-01

    Understanding defect chemistry, particularly ion migration, and its significant effect on the surface’s optical and electronic properties is one of the major challenges impeding the development of hybrid perovskite-based devices. Here, using both experimental and theoretical approaches, we demonstrated that the surface layers of the perovskite crystals may acquire a high concentration of positively charged vacancies with the complementary negatively charged halide ions pushed to the surface. This charge separation near the surface generates an electric field that can induce an increase of optical band gap in the surface layers relative to the bulk. We found that the charge separation, electric field, and the amplitude of shift in the bandgap strongly depend on the halides and organic moieties of perovskite crystals. Our findings reveal the peculiarity of surface effects that are currently limiting the applications of perovskite crystals and more importantly explain their origins, thus enabling viable surface passivation strategies to remediate them.

  6. Manufacturing uniform field silicon drift detector using double boron layer

    Energy Technology Data Exchange (ETDEWEB)

    Golshani, Negin, E-mail: negingolshani@gmail.com; Beenakker, C.I.M; Ishihara, R.

    2015-09-11

    Novel SDDs with continuous junctions on both sides are fabricated using pure boron (PureB) depositions to create a shallow junction in the entrance window side and a continuous rectifying junction with different potentials as function of the drift coordinate in the device side. The SDDs made in this material offer lower leakage current. In addition, continuous SDD designed with two boron layers with different sheet resistances displays uniform electric field.

  7. Mixing Acid Salts and Layered Double Hydroxides in Nanoscale under Solid Condition

    Directory of Open Access Journals (Sweden)

    Hirokazu Nakayama

    2014-07-01

    Full Text Available The immobilization of potassium sorbate, potassium aspartate and sorbic acid in layered double hydroxide under solid condition was examined. By simply mixing two solids, immobilization of sorbate and aspartate in the interlayer space of nitrate-type layered double hydroxide, so called intercalation reaction, was achieved, and the uptakes, that is, the amount of immobilized salts and the interlayer distances of intercalation compounds were almost the same as those obtained in aqueous solution. However, no intercalation was achieved for sorbic acid. Although intercalation of sorbate and aspartate into chloride-type layered double hydroxide was possible, the uptakes for these intercalation compounds were lower than those obtained using nitrate-type layered double hydroxide. The intercalation under solid condition could be achieved to the same extent as for ion-exchange reaction in aqueous solution, and the reactivity was similar to that observed in aqueous solution. This method will enable the encapsulation of acidic drug in layered double hydroxide as nano level simply by mixing both solids.

  8. Umbilical Cord Mesenchymal Stem Cells Combined With a Collagenfibrin Double-layered Membrane Accelerates Wound Healing.

    Science.gov (United States)

    Nan, Wenbin; Liu, Rui; Chen, Hongli; Xu, Zhihao; Chen, Jiannan; Wang, Manman; Yuan, Zhiqing

    2015-05-01

    The aim of this study was to examine the effects of human umbilical cord mesenchymal stem cells (hUCMSCs) in combination with a collagen-fibrin double-layered membrane on wound healing in mice. A collagen-fibrin double-layered membrane was prepared, and the surface properties of the support material were investigated using a scanning electron microscope. Twenty-four mice were prepared for use as full-thickness skin wound models and randomly divided into 3 groups: group A, a control group in which the wounds were bound using a conventional method; group B, a group treated with hUCMSCs combined with a collagen membrane; and group C, a group treated with hUCMSCs combined with a collagen-fibrin double-layered membrane. The postoperative concrescence of the wounds was observed daily to evaluate the effects of the different treatments. Scanning electron microscope observation showed the collagen-fibrin scaffolds exhibited a highly porous and interconnected structure, and wound healing in the double-layered membrane group was better than in groups A or B. Treatment with hUCMSCs combined with a collagen-fibrin double-layered membrane accelerated wound healing.

  9. Double-layered ZnO nanostructures for efficient perovskite solar cells

    KAUST Repository

    Mahmood, Khalid

    2014-01-01

    To date, a single layer of TiO2 or ZnO has been the most successful implementations of any electron transport layer (ETL) in solution-processed perovskite solar cells. In a quest to improve the ETL, we explore a new nanostructured double-layer ZnO film for mesoscopic perovskite-based thin film photovoltaics. This approach yields a maximum power conversion efficiency of 10.35%, which we attribute to the morphology of oxide layer and to faster electron transport. The successful implementation of the low-temperature hydrothermally processed double-layer ZnO film as ETL in perovskite solar cells highlights the opportunities to further improve the efficiencies by focusing on the ETL in this rapidly developing field. This journal is

  10. Cladding layer on well-defined double-wall TiO2 nanotubes.

    Science.gov (United States)

    Xue, Chaorui; Yonezawa, Tetsu; Nguyen, Mai Thanh; Lu, Xu

    2015-02-03

    Highly ordered double-wall TiO2 nanotube arrays were obtained by a two-step anodization method in a fluoride-containing glycerol based electrolyte. The low water and fluoride content and high viscosity of the electrolyte support a partly undissolved fluoride-rich layer, and its hydrolyzed products remain on the tube walls. The double-wall structure and a cladding layer originating from the fluoride-rich layer were clearly observed after annealing. The morphology and crystal structure of the cladding layer were investigated. The study of the cladding layer gives a fundamental insight into the wall structure design of the anodic TiO2 nanotubes in the glycerol-based electrolyte.

  11. Application of double-layered skin phantoms for optical flow imaging during laser tattoo treatments

    Science.gov (United States)

    Lee, Byeong-il; Song, Woosub; Kim, Hyejin; Kang, Hyun Wook

    2016-05-01

    The feasible application of double-layered skin phantoms was evaluated to identify artificial blood flow with a Doppler optical coherence tomography (DOCT) system for laser tattoo treatments. Polydimethylsiloxane (PDMS) was used to fabricate the artificial phantoms with flow channels embedded. A double-integrating sphere system with an inverse adding-doubling method quantified both the absorption and the reduced scattering coefficients for epidermis and dermis phantoms. Both OCT and caliper measurements confirmed the double-layered phantom structure (epidermis = 136 ± 17 µm vs. dermis = 3.0 ± 0.1 mm). The DOCT method demonstrated that high flow rates were associated with high image contrast, visualizing the position and the shape of the flow channel. Application of the channel-embedded skin phantoms in conjunction with DOCT can be a reliable technique to assess dynamic variations in the blood flow during and after laser tattoo treatments.

  12. A novel controllable double-layer magnetic lattice with cold atoms

    Institute of Scientific and Technical Information of China (English)

    Min Yun; Jianping Yin

    2005-01-01

    We propose a novel array of controllable double-well magnetic microtraps for cold atoms by using an array of square current-carrying wires and two additional bias magnetic fields. Arrays of double layer magnetooptical traps (MOTs) and Ioffe traps can be constructed by using same wire configurations and different currents and bias fields. Furthermore, the array of double-well magnetic microtraps can be continuously evolved as an array of single-well magnetic microtraps by reducing the currents in the wires. Our study shows that our scheme can be used to realize a controllable double-layer magnetic lattice with cold atoms, to form array of Bose-Einstein condensations (BECs), or to study atom interference, and so on.

  13. New Power Lateral Double Diffused Metal-Oxide-Semiconductor Transistor with a Folded Accumulation Layer

    Institute of Scientific and Technical Information of China (English)

    DUAN Bao-Xing; ZHANG Bo; LI Zhao-Ji

    2007-01-01

    A new lateral double diffused metal oxide semiconductor field effect transistor with a double-charge accumulation layer using a folded silicon substrate is proposed to improve the performance of the breakdown voltage and specific on-resistance. Three kinds of technologies, which are the additional electric field modulation effect, majority carrier accumulation and increasing the effective conduction area, are applied simultaneously by a semi-insulating polycrystalline silicon layer deposited over the top of thin oxide covering the drift region. It is indicated that by the simulator, the ideal silicon limits of the breakdown voltage and specific on-resistance have been broken due to the complete three-dimensional reduced surface field effect and the doubled majority carrier accumulation layer.

  14. A Ni-Fe Layered Double Hydroxide-Carbon Nanotube Complex for Water Oxidation

    CERN Document Server

    Gong, Ming; Wang, Hailiang; Liang, Yongye; Wu, Justin Zachary; Zhou, Jigang; Wang, Jian; Regier, Tom; Wei, Fei; Dai, Hongjie

    2013-01-01

    Highly active, durable and cost-effective electrocatalysts for water oxidation to evolve oxygen gas hold a key to a range of renewable energy solutions including water splitting and rechargeable metal-air batteries. Here, we report the synthesis of ultrathin nickel iron layered double hydroxide nanoplates on mildly oxidized multi-walled carbon nanotubes. Incorporation of Fe into the nickel hydroxide induced the formation of NiFe-layered double hydroxide. The nanoplates were covalently attached to a network of nanotubes, affording excellent electrical wiring to the nanoplates. The ultra-thin Ni-Fe layered double hydroxide nanoplates/carbon nanotube complex was found to exhibit unusually high electro-catalytic activity and stability for oxygen evolution and outperformed commercial precious metal Ir catalysts.

  15. Low frequency solitons and double layers in a magnetized plasma with two temperature electrons

    Energy Technology Data Exchange (ETDEWEB)

    Rufai, O. R. [Department of Physics, University of the Western Cape, Private Bag X17, Bellville 7535 (South Africa); Bharuthram, R. [Office of the Deputy Vice Chancellor (Academic), University of the Western Cape, Bellville (South Africa); Singh, S. V. [Indian Institute of Geomagnetism, New Panvel (W), Navi Mumbai-410218 (India); School of Chemistry and Physics, University of Kwa-Zulu Natal, Durban (South Africa); Lakhina, G. S. [Indian Institute of Geomagnetism, New Panvel (W), Navi Mumbai-410218 (India)

    2012-12-15

    Finite amplitude non-linear ion-acoustic solitary waves and double layers are studied in a magnetized plasma with cold ions fluid and two distinct groups of Boltzmann electrons, using the Sagdeev pseudo-potential technique. The conditions under which the solitary waves and double layers can exist are found both analytically and numerically. We have shown the existence of negative potential solitary waves and double layers for subsonic Mach numbers, whereas in the unmagnetized plasma they can only in the supersonic Mach number regime. For the plasma parameters in the auroral region, the electric field amplitude of the solitary structures comes out to be 49 mV/m which is in agreement of the Viking observations in this region.

  16. Droplet transfer behavior of the stainless steel coated electrode with double-layer coating

    Institute of Scientific and Technical Information of China (English)

    孙咸; 马成勇; 王宝; 张汉谦

    2002-01-01

    In this paper, the droplet transfer behavior of the stainless steel coated electrode with double-layer coating is researched by means of those experimental methods, such as high speed camera, collecting droplet in water, surfacing on the steel plate et al. The results show that the droplet transfer indexes of coated electrode are mainly controlled by the size of droplet, which affects the transfer behavior of droplet. The distribution characteristic of the droplet size of the electrode affects the numerical relationship among droplet transfer indexes. The metallurgical process of the coated electrode with double-layer coating is carried out continuously in different zones. The main reason for the coated electrode with double-layer coating gaining excellent usability quality is that the droplets realize the "quasi flux wall guided transfer pattern".

  17. Interfacial double layer mediated electrochemical growth of thin-walled platinum nanotubes

    Science.gov (United States)

    Zhang, Liqiu; Kim, Sang Min; Cho, Sanghyun; Jang, Hee-Jeong; Liu, Lichun; Park, Sungho

    2017-01-01

    This work demonstrates that thin-walled platinum nanotubes can be readily synthesized by controlling the interfacial double layer in alumina nanochannels. The gradient distribution of ions in nanochannels enables the creation of Pt nanotubes with walls as thin as 5 nm at the top end when using a solution containing polyvinylpyrrolidone (PVP) and chloroplatinic acid (H2PtCl6) under the influence of an electric potential in nanochannels. The highly efficient formation of thin-walled Pt nanotubes is a result of the concentration gradient of {{{{PtCl}}}6}2- and a thick double layer, which was caused by the low concentration of Pt precursors and the enhanced surface charge density induced by protonated PVP steric adsorption. This well-controlled synthesis reveals that the interfacial double layer is a useful tool to tailor the structure of nanomaterials in a nanoscale space, and holds promise in the construction of more complex functional nanostructures.

  18. Megavolt parallel potentials arising from double-layer streams in the Earth's outer radiation belt.

    Science.gov (United States)

    Mozer, F S; Bale, S D; Bonnell, J W; Chaston, C C; Roth, I; Wygant, J

    2013-12-06

    Huge numbers of double layers carrying electric fields parallel to the local magnetic field line have been observed on the Van Allen probes in connection with in situ relativistic electron acceleration in the Earth's outer radiation belt. For one case with adequate high time resolution data, 7000 double layers were observed in an interval of 1 min to produce a 230,000 V net parallel potential drop crossing the spacecraft. Lower resolution data show that this event lasted for 6 min and that more than 1,000,000 volts of net parallel potential crossed the spacecraft during this time. A double layer traverses the length of a magnetic field line in about 15 s and the orbital motion of the spacecraft perpendicular to the magnetic field was about 700 km during this 6 min interval. Thus, the instantaneous parallel potential along a single magnetic field line was the order of tens of kilovolts. Electrons on the field line might experience many such potential steps in their lifetimes to accelerate them to energies where they serve as the seed population for relativistic acceleration by coherent, large amplitude whistler mode waves. Because the double-layer speed of 3100  km/s is the order of the electron acoustic speed (and not the ion acoustic speed) of a 25 eV plasma, the double layers may result from a new electron acoustic mode. Acceleration mechanisms involving double layers may also be important in planetary radiation belts such as Jupiter, Saturn, Uranus, and Neptune, in the solar corona during flares, and in astrophysical objects.

  19. Transport spectroscopy in bilayer graphene using double layer heterostructures

    Science.gov (United States)

    Lee, Kayoung; Jung, Jeil; Fallahazad, Babak; Tutuc, Emanuel

    2017-09-01

    We provide a comprehensive study of the chemical potential of bilayer graphene in a wide range of carrier density, at zero and high magnetic (B)-fields, and at different transverse electric (E)-fields, using high quality double bilayer graphene heterostructures. Using a direct thermodynamic transport spectroscopic technique, we probe the chemical potential as a function of carrier density in six samples. The data clearly reveal the non-parabolicity and electron-hole asymmetry of energy-momentum dispersion in bilayer graphene. The tight-binding hopping amplitudes, t 0, t 1, and t 4, renormalized by electron-electron interaction are extracted from the chemical potential versus density dependence. A diverse set of electron-electron interaction driven phenomena were also clearly discerned at zero and high B-fields. We measure the gaps at integer fillings with orbital index N  =  0, 1, and discuss about the dependence of the N  =  0, 1 quantum Hall phases on the carrier density (or filling factor), E-field, and B-field.

  20. Synthesis and characterization of laurate-intercalated Mg–Al layered double hydroxide prepared by coprecipitation

    DEFF Research Database (Denmark)

    Gerds, Nathalie Christiane; Katiyar, Vimal; Koch, Christian Bender

    2012-01-01

    Effective utilization of layered double hydroxides (LDH) for industrial applications requires the synthesis of pure and well-defined LDH phases. In the present study, dodecanoate (laurate) anions were intercalated into Mg–Al-layered double hydroxide (LDH-C12) by coprecipitation in the presence...... intercalated structure, but we here demonstrate it to be magnesium laurate (Mg-C12). The LDH-C12 compound showed high structural order with a basal spacing of 2.41nm. Fourier-transform IR-spectra confirmed the intercalation of the laurate anions in the interlayer. Transmission electron microscopy showed plate...

  1. Impact single versus double layer uterine closure in caesarean section to uterine rupture

    OpenAIRE

    Budi Iman Santoso; Raymond Surya; Rima Irwinda

    2016-01-01

    Caesarean section (CS) is one of the most frequent delivery methods in the world whereas the rates of CS were varied according to developing (from 3.5 to 29.2%) and developed countries (21.1%). The study aims to known the impact of single versus double layer uterine closure to uterine rupture in the history of cesarean section (CS). In this case report, the clinical question is single versus double-layer uterine closure on the previous CS, gives better outcome to reduce the risk of uterine ru...

  2. Tooth preparation and fabrication of porcelain veneers using a double-layer technique.

    Science.gov (United States)

    Chpindel, P; Cristou, M

    1994-09-01

    This article discusses proper tooth preparation when using the double-layered porcelain technique for constructing porcelain veneers designed to produce strength and translucency. Indications for this technique include color correction, restoration of lost tooth structure or improper tooth size, and overall smile design. A new indication--misalignment--has been added. The objective of this article is to review tooth preparation and double-layered laboratory techniques using hydrothermal ceramics in combination. Four cases are used to illustrate the procedure, concentrating on the correction of misaligned teeth.

  3. Oceanic Double-Diffusive Layer Thicknesses in the Presence of Turbulence

    Science.gov (United States)

    Shibley, Nicole; Timmermans, Mary-Louise

    2016-11-01

    Double-diffusive stratification in the ocean is characterized by staircase structures consisting of mixed layers separated by high-gradient interfaces in temperature and salinity. Several past studies have examined mechanisms that govern the observed thicknesses of staircase mixed layers. In one formalism, the mixed-layer thickness is set by layer formation that arises when a heat source is applied at the base of water that is stably-stratified in salinity; in another, the equilibrium thickness of mixed layers has been explained as the product of "merging," where thin layers continue to grow until they reach a thickness determined by a criterion relating the ratio of heat flux to salt flux and the density ratio. We extend the above two theories to consider the influence of turbulence on mixed-layer thicknesses. The study has implications for the Arctic Ocean where double-diffusive staircases are widely present, and mixed-layer thicknesses are well-resolved by ocean measurements. Our theoretical framework provides a means to determine turbulent diffusivities (in regions where microstructure measurements are not available) by considering only observations of density ratio, stratification, and layer thicknesses.

  4. Expanded graphite—Phenolic resin composites based double layer microwave absorber for X-band applications

    Science.gov (United States)

    Gogoi, Jyoti Prasad; Bhattacharyya, Nidhi Saxena

    2014-11-01

    In this investigation, double layer microwave absorbers are designed and developed with paired combination of 5 wt. %, 7 wt. %, 8 wt. %, and 10 wt. % expanded graphite-novolac phenolic resin (EG-NPR) composites, in the frequency range of 8.2-12.4 GHz. The thickness and compositional combination of the two layers constituting the absorber are optimized to achieve minimum value of reflection loss (dB) and a broad microwave absorption bandwidth. Double layer combinations showing -25 dB absorption bandwidth >2 GHz and -30 dB absorption bandwidth >1 GHz are chosen for fabrication. The total thickness of the fabricated double layer microwave absorber is varied from 3 mm to 3.4 mm. Absorption bandwidths at -10 dB, -20 dB, -25 dB and -30 dB are determined for the fabricated structure. The maximum -25 dB and -30 dB absorption bandwidth of 2.47 GHz and 1.77 GHz, respectively, are observed for the double layer structure with (5 wt. %-8 wt. %) EG-NPR composites with total thickness of 3.2 mm, while -10 dB bandwidth covers the entire X-band range.

  5. Functionalized layered double hydroxide-based epoxy nanocomposites with improved flame retardancy and mechanical properties

    OpenAIRE

    Ehsan Naderi Kalali; Xin Wanga; De-Yi Wang

    2015-01-01

    Functionalized layered double hydroxides (LDHs) based on a multi-modifier system composed of hydroxypropyl-sulfobutyl-beta-cyclodextrin sodium (sCD), dodecylbenzenesulfonate (DBS) and taurine (T) have been designed and fabricated in this paper, aiming at developing high performance fire retardant epoxy nanocomposites. In this multi-modifier system, sCD was utilized to improve the char yield, DBS was used to enlarge the inter-layer distance of LDH and T was used to enhance the interaction betw...

  6. Bias-dependent molecular-level structure of electrical double layer in ionic liquid on graphite.

    Science.gov (United States)

    Black, Jennifer M; Walters, Deron; Labuda, Aleksander; Feng, Guang; Hillesheim, Patrick C; Dai, Sheng; Cummings, Peter T; Kalinin, Sergei V; Proksch, Roger; Balke, Nina

    2013-01-01

    Here we report the bias-evolution of the electrical double layer structure of an ionic liquid on highly ordered pyrolytic graphite measured by atomic force microscopy. We observe reconfiguration under applied bias and the orientational transitions in the Stern layer. The synergy between molecular dynamics simulation and experiment provides a comprehensive picture of structural phenomena and long and short-range interactions, which improves our understanding of the mechanism of charge storage on a molecular level.

  7. Understanding surface interactions in aqueous miscible organic solvent treated layered double hydroxides.

    OpenAIRE

    Erastova, Valentina; Degiacomi, Matteo T.; O'Hare, Dermot; Greenwell, H. Chris

    2016-01-01

    Layered materials are of interest for use in a wealth of technological applications, many of which require a high surface area for optimal properties and performance. Recently, an industrially scalable method to create high surface area layered double hydroxide (LDH) materials, which may be readily dispersed in non-polar solvents, has been developed. This method involves treatment of LDHs with aqueous miscible organic (AMO) solvents. Here, molecular modeling is exploited to elucidate the AMO ...

  8. Morphologies, Preparations and Applications of Layered Double Hydroxide Micro-/Nanostructures

    Directory of Open Access Journals (Sweden)

    Mingdong Dong

    2010-12-01

    Full Text Available Layered double hydroxides (LDHs, also well-known as hydrotalcite-like layered clays, have been widely investigated in the fields of catalysts and catalyst support, anion exchanger, electrical and optical functional materials, flame retardants and nanoadditives. This feature article focuses on the progress in micro-/nanostructured LDHs in terms of morphology, and also on the preparations, applications, and perspectives of the LDHs with different morphologies.

  9. Modification of nano-sized layered double hydroxides by long-chain organic aliphatic surfactants

    OpenAIRE

    RAMASAMY ANBARASAN; SEUNG SOON IM; WANDUC LEE

    2008-01-01

    The inter-layer anion of layered double hydroxides (LDH) with a hydrotalcite (HT)-like structure was ion-exchanged with various organic surfactants, particularly with long chain aliphatic surfactants. After the ion-exchange process, the basal spacing of the LDH was increased and the increase of the basal spacing depended on various factors, such as the intercalation capacity functionality and orientation capability of the surfactant. Of the employed surfactants, stearic acid intercalated LDH ...

  10. Asymptotic theory of double layer and shielding of electric field at the edge of illuminated plasma

    Energy Technology Data Exchange (ETDEWEB)

    Benilov, M. S. [Departamento de Física, CCCEE, Universidade da Madeira, Largo do Município, 9000 Funchal (Portugal); Thomas, D. M. [Blackett Laboratory, Imperial College London, Prince Consort Road, London SW7 2BW (United Kingdom)

    2014-04-15

    The method of matched asymptotic expansions is applied to the problem of a collisionless plasma generated by UV illumination localized in a central part of the plasma in the limiting case of small Debye length λ{sub D}. A second-approximation asymptotic solution is found for the double layer positioned at the boundary of the illuminated region and for the un-illuminated plasma for the plane geometry. Numerical calculations for different values of λ{sub D} are reported and found to confirm the asymptotic results. The net integral space charge of the double layer is asymptotically small, although in the plane geometry it is just sufficient to shield the ambipolar electric field existing in the illuminated region and thus to prevent it from penetrating into the un-illuminated region. The double layer has the same mathematical nature as the intermediate transition layer separating an active plasma and a collisionless sheath, and the underlying physics is also the same. In essence, the two layers represent the same physical object: a transonic layer.

  11. Interaction between electrical double layers of soil colloids and Fe/Al oxides in suspensions.

    Science.gov (United States)

    Hou, Tao; Xu, Renkou; Tiwari, Diwakar; Zhao, Anzhen

    2007-06-15

    Phyllosilicates with net negative surface charge and Fe/Al oxides with net positive surface charge coexist in variable-charge soils, and the interaction between these oppositely charged particles affects the stability of mixed colloids, aggregation, and even the surface chemical properties of variable-charge soils. The interaction of the diffuse layers of electrical double layers between the negatively charged soil colloidal particles and the positively charged particles of goethite or gamma-Al(2)O(3) was investigated in this article through the comparison of zeta potentials between single-soil colloidal systems and binary systems containing soil colloids and Fe/Al oxides. The results showed that the presence of goethite and gamma-Al(2)O(3) increased the zeta potential of the binary system containing soil colloids and Fe/Al oxides, which clearly suggests the overlapping of the diffuse layers in soil colloids and Fe/Al oxides. The overlapping of the diffuse layers leads to a decrease in the effective negative charge density on soil colloid and thus causes a shift of pH-zeta potential curves toward the more positive-value side. The interaction of the electrical double layers is also related to the charge characteristics on the Fe/Al oxides: the higher the positive charge density on Fe/Al oxides, the stronger the interaction of the electrical double layers between the soil colloid particles and the Fe/Al oxides.

  12. Hierarchical Supervisor and Agent Routing Algorithm in LEO/MEO Double-layered Optical Satellite Network

    Science.gov (United States)

    Li, Yongjun; Zhao, Shanghong

    2016-09-01

    A novel routing algorithm (Hierarchical Supervisor and Agent Routing Algorithm, HSARA) for LEO/MEO (low earth orbit/medium earth orbit) double-layered optical satellite network is brought forward. The so-called supervisor (MEO satellite) is designed for failure recovery and network management. LEO satellites are grouped according to the virtual managed field of MEO which is different from coverage area of MEO satellite in RF satellite network. In each LEO group, one LEO satellite which has maximal persistent link with its supervisor is called the agent. A LEO group is updated when this optical inter-orbit links between agent LEO satellite and the corresponding MEO satellite supervisor cuts off. In this way, computations of topology changes and LEO group updating can be decreased. Expense of routing is integration of delay and wavelength utilization. HSARA algorithm simulations are implemented and the results are as follows: average network delay of HSARA can reduce 21 ms and 31.2 ms compared with traditional multilayered satellite routing and single-layer LEO satellite respectively; LEO/MEO double-layered optical satellite network can cover polar region which cannot be covered by single-layered LEO satellite and throughput is 1% more than that of single-layered LEO satellite averagely. Therefore, exact global coverage can be achieved with this double-layered optical satellite network.

  13. Probing the electric field in organic double layer-system by optical second harmonic generation

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Eunju; Shibata, Yoshinori; Manaka, Takaaki [Department of Physical Electronics, Tokyo Institute of Technology, 2-12-1 O-okayama, Meguro-ku, Tokyo 152-8552 (Japan); Iwamoto, Mitsumasa, E-mail: iwamoto@ome.pe.titech.ac.j [Department of Physical Electronics, Tokyo Institute of Technology, 2-12-1 O-okayama, Meguro-ku, Tokyo 152-8552 (Japan)

    2009-11-30

    Optical electric field induced second harmonic generation (EFISHG) measurements were employed to probe the electric field in the active layer of organic field effect transistors (OFETs) and organic light emitting diodes (OLEDs). The OFETs used were double-layered with an active layer of pentacene/poly (3-hexyl thiophene) P3HT on SiO{sub 2} gate insulator with Au source and drain electrodes. It was shown that SHG from the P3HT bottom layer could be selectively probed at a wavelength of 450 nm. Similarly, by using OLEDs comprised of a double layer of Tris(8-hydroxyquinolinato) aluminium (Alq{sub 3}) and N'-di(1-naphthyl)-N,N'-diphenylbenzidine ({alpha}-NPD) with a device structure of indium-zinc oxide (IZO)/{alpha}-NPD/Alq{sub 3}/Al, it was shown that EFISHG from the Alq{sub 3} layer could be selectively probed at a wavelength of 1000 nm by reflective laser beam irradiation from IZO-side. The results show that the spectroscopic nature of materials allows us to selectively probe the electric field distribution in each layer of multi-layer in organic devices.

  14. Electric-Field-Induced Superconductivity Detected by Magnetization Measurements of an Electric-Double-Layer Capacitor

    NARCIS (Netherlands)

    Kasahara, Yuichi; Nishijima, Takahiro; Sato, Tatsuya; Takeuchi, Yuki; Ye, Jianting; Yuan, Hongtao; Shimotani, Hidekazu; Iwasa, Yoshihiro

    We report evidence for superconductivity induced by the application of strong electric fields onto the surface of a band insulator, ZrNCl, provided by the observation of a shielding diamagnetic signal. We introduced an electric-double-layer capacitor configuration and in situ magnetization

  15. Electric double layer transistors with ferroelectric BaTiO3 channels

    NARCIS (Netherlands)

    Ito, M.; Matsubara, Y.; Kozuka, Y.; Takahashi, K. S.; Kagawa, F.; Ye, J. T.; Iwasa, Y.; Ueno, K.; Tokura, Y.; Kawasaki, M.

    2014-01-01

    We report the surface conduction of a BaTiO3 thin film using electric double layer transistor (EDLT) structure. A transistor operation was observed at 220 K with an on/off ratio exceeding 10(5), demonstrating that ionic liquid gating is effective to induce carriers at the surface of ferroelectric ma

  16. Double layered self-expanding metal stents for malignant esophageal obstruction, especially across the gastroesophageal junction

    Institute of Scientific and Technical Information of China (English)

    Min Dae Kim; Su Bum Park; Dae Hwan Kang; Jae Hyung Lee; Cheol Woong Choi; Hyung Wook Kim; Chung Uk Chung

    2012-01-01

    AIM:TO evaluate the clinical outcomes of double-layered self-expanding metal stents (SEMS) for treatment of malignant esophageal obstruction according to whether SEMS crosses the gastroesophageal junction (GEJ).METHODS:Forty eight patients who underwent the SEMS insertion for malignant esophageal obstruction were enrolled.Patients were classified as GEJ group (SEMS across GEHm 18 patients) and non-GEJ group (SEMS above GEJ,30 patients) according to SEMS position.Double layered (outer uncovered and inner covered stent) esophageal stents were placed.RESULTS:The SEMS insertion and the clinical improvement were achieved in all patients in both groups.Stent malfunction occurred in seven patients in the GEJ group and nine patients in the non-GEJ group.Tumor overgrowth occurred in five and eight patients,respectively,food impaction occurred in one patient in each group,and stent migration occurred in one and no patient,respectively.There were no significant differences between the two groups.Reflux esophagitis occurred more frequently in the GEJ group (eight vs five patients,P =0.036) and was controlled by proton pump inhibitor.Aspiration pneumonia occurred in zero and five patients,respectively,and tracheoesophageal fistula occurred in zero and two patients,respectively.CONCLUSION:Double-layered SEMS are a feasible and effective treatment when placed across the GEJ for malignant esophageal obstruction.Double-layered SEMS provide acceptable complications,especially migration,although reflux esophagitis is more common in the GEJ group.

  17. Internal energy and specific heat in a ferromagnetic-antiferromagnetic double layers

    Institute of Scientific and Technical Information of China (English)

    Jiang Wei; Guo An-Bang

    2007-01-01

    The internal energy and specific heat of a Heisenberg ferro- antiferromagnetic double-layer system are studied by using spin-wave theory and the retarded Green function method at low temperatures. Numerical results show that the antiferromagnetic intralayer coupling J2 has an important influence on internal energy and specific heat for a four-sublattice system with antiferromagnetic (or ferrimagnetic) interlayer couplings.

  18. Small amplitude variable charge dust Bernstein-Greene-Kruskal double layers

    Energy Technology Data Exchange (ETDEWEB)

    Amour, Rabia [Plasma Physics Group, Theoretical Physics Laboratory, Faculty of Sciences - Physics, U.S.T.H.B, Bab-Ezzouar, B.P. 32, El Alia, Algiers 16111 (Algeria); Tribeche, Mouloud [Plasma Physics Group, Theoretical Physics Laboratory, Faculty of Sciences - Physics, U.S.T.H.B, Bab-Ezzouar, B.P. 32, El Alia, Algiers 16111 (Algeria)], E-mail: mouloud-tribeche@lycos.com

    2009-05-11

    A first theoretical attempt is made to investigate small amplitude, variable charge dust Bernstein-Greene-Kruskal (BGK) double layers (DLs). The nature of the dust BGK-DLs (compressive or rarefactive), their strength and thickness depend sensitively on the net negative charge residing on the grain surface, the dust grain dynamics and, more interestingly, on the ion-to-electron temperatures ratio.

  19. Laser cutting silicon-glass double layer wafer with laser induced thermal-crack propagation

    Science.gov (United States)

    Cai, Yecheng; Yang, Lijun; Zhang, Hongzhi; Wang, Yang

    2016-07-01

    This study was aimed at introducing the laser induced thermal-crack propagation (LITP) technology to solve the silicon-glass double layer wafer dicing problems in the packaging procedure of silicon-glass device packaged by WLCSP technology, investigating the feasibility of this idea, and studying the crack propagation process of LITP cutting double layer wafer. In this paper, the physical process of the 1064 nm laser beam interact with the double layer wafer during the cutting process was studied theoretically. A mathematical model consists the volumetric heating source and the surface heating source has been established. The temperature and stress distribution was simulated by using finite element method (FEM) analysis software ABAQUS. The extended finite element method (XFEM) was added to the simulation as the supplementary features to simulate the crack propagation process and the crack propagation profile. The silicon-glass double layer wafer cutting verification experiment under typical parameters was conducted by using the 1064 nm semiconductor laser. The crack propagation profile on the fracture surface was examined by optical microscope and explained from the stress distribution and XFEM status. It was concluded that the quality of the finished fracture surface has been greatly improved, and the experiment results were well supported by the numerical simulation results.

  20. Hydrothermal Synthesis and Characterization of 3R Polytypes of Mg-Al Layered Double Hydroxides

    NARCIS (Netherlands)

    Budhysutanto, W.N.

    2010-01-01

    Layered Double Hydroxides (LDH) is a unique group of clays that have an anionic exchange capability. This research explored the hydrothermal method as an alternative method to synthesize Mg-Al LDH. It is a simple and more environmentally friendly compared to the conventional method of co-precipitati

  1. The recording characteristics of particulate double layers with hard-magnetic and soft-magnetic underlayers

    NARCIS (Netherlands)

    Lalbahadoersing, S.; Groenland, J.P.J.; Luitjens, S.B.; Lodder, J.C.

    2002-01-01

    Particulate double-layer tape samples with magnetic underlayers have been investigated by performing magnetic recording measurements and by computer simulation.The presence of soft-magnetic underlayers resulted in decreased signal output and better overwrite behavior. Hard-magnetic underlayers showe

  2. Theoretical analysis and experimental study on the influence of electric double layer on thin film lubrication

    Institute of Scientific and Technical Information of China (English)

    WANG Xin-jie; BAI Shao-xian; HUANG Ping

    2006-01-01

    A new mathematical model for thin film lubrication is established by taking into account the effect of an electric double layer.In the present paper,experiments are carried out on a self-made tester.With a composite block and a rotating disk,influence of electric double layer on thin film lubrication is studied.Two different methods are used to reconstruct the field of electric double layer so as to change its effect.One is to change the ionic concentration of lubricants by adding additives,and the other is to apply an external electric field on friction pairs.According theoretical analysis,both the methods will apparently change the electro-viscosity of the lubricant film so as to change the lubrication performances.After theoretical calculation of electro-viscosity is amended according to the experimental results,the equations of electro-viscosity are presented.The results show that the equivalent viscosity of fluid induced by the effect of electric double layer apparently increases with the decrease of thickness of the film while the lubrication film is thin enough.The effect of electro-viscosity is weakened as the thickness of the film increases.Moreover,the effect of electro-viscosity increases with the increase of external electric field at first.When the voltage reaches a certain value,the electro-viscosity begins to decrease.

  3. Studies on Synthesis and Properties of Mg-Al-nitrate Layered Double Hydroxides

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    A positive Mg-Al-nitrate layered double hydroxides (LDHs) has been synthesized using a non-steady coprccipitation method. The shape, size, chemical composition, electrical property and anion exchange property of the positive nanoparticle were studied by SEM, XRD, FTIR,chemical analysis, spectroanalysis and measuring of electrophoretic mobilities. Preliminary results show the positive nanopartiele is a promising precursor ofpolymer/LDHs nanocomposite.

  4. Formation of nematic liquid crystals of sterically stabilized layered double hydroxide platelets

    NARCIS (Netherlands)

    Mourad, M.C.D.; Devid, E.J.; van Schooneveld, M.M.; Vonk, Ch.; Lekkerkerker, H.N.W.

    2008-01-01

    Colloidal platelets of hydrotalcite, a layered double hydroxide, have been prepared by coprecipitation at pH 11−12 of magnesium nitrate and aluminum nitrate at two different magnesium to aluminum ratios. Changing the temperature and ionic strength during hydrothermal treatment, the platelets were ta

  5. Using a double-layered palmaris longus tendon for suspension of facial paralysis

    DEFF Research Database (Denmark)

    Toyserkani, Navid Mohamadpour; Bakholdt, Vivi; Sørensen, Jens Ahm

    2015-01-01

    INTRODUCTION: Facial palsy is a debilitating condition entailing both cosmetic and functional limitations. Static suspension procedures can be performed when more advanced dynamic techniques are not indicated. Since 2006, we have used a double-layered palmaris longus tendon graft through an ovular...

  6. Steric-effect-induced enhancement of electrical-double-layer overlapping phenomena

    NARCIS (Netherlands)

    Das, Siddhartha; Chakraborty, Suman

    2011-01-01

    In this paper, we demonstrate that nontrivial interactions between steric effect and electrical-double-layer (EDL) overlap phenomena may augment the effective extent of EDL overlap in narrow fluidic confinements to a significant extent by virtue of rendering the channel centerline potential tending

  7. Electric-Field-Induced Superconductivity Detected by Magnetization Measurements of an Electric-Double-Layer Capacitor

    NARCIS (Netherlands)

    Kasahara, Yuichi; Nishijima, Takahiro; Sato, Tatsuya; Takeuchi, Yuki; Ye, Jianting; Yuan, Hongtao; Shimotani, Hidekazu; Iwasa, Yoshihiro

    2011-01-01

    We report evidence for superconductivity induced by the application of strong electric fields onto the surface of a band insulator, ZrNCl, provided by the observation of a shielding diamagnetic signal. We introduced an electric-double-layer capacitor configuration and in situ magnetization measureme

  8. Electric-Field-Induced Superconductivity Detected by Magnetization Measurements of an Electric-Double-Layer Capacitor

    NARCIS (Netherlands)

    Kasahara, Yuichi; Nishijima, Takahiro; Sato, Tatsuya; Takeuchi, Yuki; Ye, Jianting; Yuan, Hongtao; Shimotani, Hidekazu; Iwasa, Yoshihiro

    2011-01-01

    We report evidence for superconductivity induced by the application of strong electric fields onto the surface of a band insulator, ZrNCl, provided by the observation of a shielding diamagnetic signal. We introduced an electric-double-layer capacitor configuration and in situ magnetization measureme

  9. Optimization of layered double hydroxide stability and adsorption capacity for anionic surfactants

    NARCIS (Netherlands)

    Schouten, Natasja; Ham, Louis G.J. van der; Euverink, Gert-Jan W.; Haan, André B. de

    2007-01-01

    Low cost adsorption technology offers high potential to clean up laundry rinsing water. From an earlier selection of adsorbents, layered double hydroxide (LDH) proved to be an interesting material for the removal of anionic surfactant, linear alkyl benzene sulfonate (LAS) which is the main contamina

  10. Optimization of layered double hydroxide stability and adsorption capacity for anionic surfactants

    NARCIS (Netherlands)

    Schouten, Natasja; Ham, van der Louis G.J.; Euverink, Gert-Jan W.; Haan, de André B.

    2007-01-01

    Low cost adsorption technology offers high potential to clean up laundry rinsing water. From an earlier selection of adsorbents (Schouten et al. 2007), layered double hydroxide (LDH) proved to be an interesting material for the removal of anionic surfactant, linear alkyl benzene sulfonate (LAS) whic

  11. Bio-Inspired Aquaporinz Containing Double-Skinned Forward Osmosis Membrane Synthesized through Layer-by-Layer Assembly

    Directory of Open Access Journals (Sweden)

    Shuzheng Wang

    2015-08-01

    Full Text Available We demonstrated a novel AquaporinZ (AqpZ-incorporated double-skinned forward osmosis (FO membrane by layer-by-layer (LbL assembly strategy. Positively charged poly(ethyleneimine (PEI and negatively charged poly(sodium 4-styrenesulfonate (PSS were alternately deposited on both the top and bottom surfaces of a hydrolyzed polyacrylonitrile (H-PAN substrate. Subsequently, an AqpZ-embedded 1,2-dioleloyl-sn-glycero-3-phosphocholine (DOPC/1,2-dioleoyl-3-trimethylammonium- propane (chloride salt (DOTAP supported lipid bilayer (SLB was formed on PSS-terminated (T-PSS membrane via vesicle rupture method. The morphology and structure of the biomimetic membranes were characterized by in situ atomic force microscopy (AFM, scanning electron microscope (SEM, Fourier transform infrared spectrometer using the attenuated total reflection technique (ATR-FTIR, and contact angle. Moreover, the FO performance of the resultant membrane was measured by using 2 M MgCl2 solution as draw solution and deionized (DI water as feed solution, respectively. The membrane with a protein-to-lipid weight ratio (P/L of 1/50 exhibits 13.2 L/m2h water flux and 3.2 g/m2h reversed flux by using FO mode, as well as 15.6 L/m2h water flux and 3.4 L/m2h reversed flux for PRO mode (the draw solution is placed against the active layer. It was also shown that the SLB layer of the double-skinned FO membrane can increase the surface hydrophilicity and reduce the surface roughness, which leads to an improved anti-fouling performance against humic acid foulant. The current work introduced a new method of fabricating high performance biomimetic FO membrane by combining AqpZ and a double-skinned structure based on LbL assembly.

  12. Dust acoustic double layers in a magnetized dusty self-gravitating plasma with superthermal particles

    Science.gov (United States)

    Sabetkar, Akbar; Dorranian, Davoud

    2016-08-01

    Our prime objective of this paper is to examine the parametric regimes for the existence and polarity of dust acoustic double layers (DADLs) and its solitary structures arising from a magnetized self-gravitating opposite polarity dust-plasma (OPDP) model. The constituents of the OPDP model are two species of positively and negatively charged dust grains, Maxwellian electrons and kappa distributed ions. Contributions of gravitational force only on dust grains are taken into account. For weakly nonlinear analysis, the multiple time scale technique has been used to construct the extended Korteweg-de Vries (E-KdV) and modified Korteweg-de Vries (M-KdV) equations. They pinpoint the evolution of DADLs and solitary structures associated with dust acoustic (DA) mode, respectively. The relevant configurational parameters in our study include the superthermality of ions (κ), obliqueness of propagation (θ), ion concentration (δi), static magnetic field B0 (via ω c p , ω c n ), and self-gravitational field (via γ), as well as the density (μ0), charge (α), and mass (β) ratio of positive to negative dust species. The proposed OPDP model permits positive and negative double layer polarities, while higher order nonlinear equation dictates us only positive polarity solitary structures. The main modification due to an increase in self-gravitational field (via γ) is an enhancement in the spatial width of double layers, yet leaving their amplitude, phase speed, and polarity practically unaffected. With enhanced superthermality and other intrinsic parameters in OPDP model, there is an opposite trend in both amplitude and width of double layers, while the amplitude and the width of solitary waves (via M-KdV equation) undergo the identical behaviors. In particular, the amplitude of solitary waves manifests monotonic behavior for permissible range of obliqueness θ, whereas this scenario is acceptable to only width of double layers. The results are discussed in the context of

  13. Ion acoustic solitons/double layers in two-ion plasma revisited

    Energy Technology Data Exchange (ETDEWEB)

    Lakhina, G. S., E-mail: gslakhina@gmail.com; Singh, S. V., E-mail: satyavir@iigs.iigm.res.in; Kakad, A. P., E-mail: amar@iigs.iigm.res.in [Indian Institute of Geomagnetism, New Panvel (W), Navi Mumbai 410218 (India)

    2014-06-15

    Ion acoustic solitons and double layers are studied in a collisionless plasma consisting of cold heavier ion species, a warm lighter ion species, and hot electrons having Boltzmann distributions by Sagdeev pseudo-potential technique. In contrast to the previous results, no double layers and super-solitons are found when both the heavy and lighter ion species are treated as cold. Only the positive potential solitons are found in this case. When the thermal effects of the lighter ion species are included, in addition to the usual ion-acoustic solitons occurring at M > 1 (where the Mach number, M, is defined as the ratio of the speed of the solitary wave and the ion-acoustic speed considering temperature of hot electrons and mass of the heavier ion species), slow ion-acoustic solitons/double layers are found to occur at low Mach number (M < 1). The slow ion-acoustic mode is actually a new ion-ion hybrid acoustic mode which disappears when the normalized number density of lighter ion species tends to 1 (i.e., no heavier species). An interesting property of the new slow ion-acoustic mode is that at low number density of the lighter ion species, only negative potential solitons/double layers are found whereas for increasing densities there is a transition first to positive solitons/double layers, and then only positive solitons. The model can be easily applicable to the dusty plasmas having positively charged dust grains by replacing the heavier ion species by the dust mass and doing a simple normalization to take account of the dust charge.

  14. Theoretical Study of Monolayer and Double-Layer Waveguide Love Wave Sensors for Achieving High Sensitivity.

    Science.gov (United States)

    Li, Shuangming; Wan, Ying; Fan, Chunhai; Su, Yan

    2017-03-22

    Love wave sensors have been widely used for sensing applications. In this work, we introduce the theoretical analysis of the monolayer and double-layer waveguide Love wave sensors. The velocity, particle displacement and energy distribution of Love waves were analyzed. Using the variations of the energy repartition, the sensitivity coefficients of Love wave sensors were calculated. To achieve a higher sensitivity coefficient, a thin gold layer was added as the second waveguide on top of the silicon dioxide (SiO₂) waveguide-based, 36 degree-rotated, Y-cut, X-propagating lithium tantalate (36° YX LiTaO₃) Love wave sensor. The Love wave velocity was significantly reduced by the added gold layer, and the flow of wave energy into the waveguide layer from the substrate was enhanced. By using the double-layer structure, almost a 72-fold enhancement in the sensitivity coefficient was achieved compared to the monolayer structure. Additionally, the thickness of the SiO₂ layer was also reduced with the application of the gold layer, resulting in easier device fabrication. This study allows for the possibility of designing and realizing robust Love wave sensors with high sensitivity and a low limit of detection.

  15. Effects of fabricated error on transmission performance of double layer frequency selective surface configuration

    Institute of Scientific and Technical Information of China (English)

    HE Bin; SUN Lian-chun

    2005-01-01

    Based on the experimental results, in which the fabricated error of the double layer frequency selective surface (FSS) leads to the transmission loss and the resonant frequency leaves away the design resonant frequency, the inter-layer separation distance (ISD) and the unit cell aligning error (UAE) were used as main variables to study the transmission performance attenuation of the double layer FSS configuration. The numerical analysis model for ISD and UAE was established and also was used to simulate the ring unit cell FSS transmission performance by the finite element and periodic moment methods. The double layer ring aperture FSS configuration designed was used as the numerical model. As a result of the numerical analysis, it is shown that both ISD and UAE produce insertion transmission loss (ITL) and insertion phase distortion (IPD) directly. Furthermore, ISD results in more loss of the amplitude of the transmitted signal for the FSS than UAE. It is significant for the designer of the multiplayer FSS to assign the fabricated error of the FSS dielectric layers. The UAE introduces the insertion phase variation badly.

  16. Impact single versus double layer uterine closure in caesarean section to uterine rupture

    Directory of Open Access Journals (Sweden)

    Budi Iman Santoso

    2016-07-01

    Full Text Available Caesarean section (CS is one of the most frequent delivery methods in the world whereas the rates of CS were varied according to developing (from 3.5 to 29.2% and developed countries (21.1%. The study aims to known the impact of single versus double layer uterine closure to uterine rupture in the history of cesarean section (CS. In this case report, the clinical question is single versus double-layer uterine closure on the previous CS, gives better outcome to reduce the risk of uterine rupture. To answer this question, we search the evidence from Pub Med and Cochrane database with the keywords: and ldquo;cesarean section" and "uterine rupture" and and ldquo;uterine closure and rdquo;. The inclusion criteria are written in English and focused comparing single and double layer uterine closure to uterine rupture in the previous CS. From the searching literature, we found 3 systematic reviews and 23 articles which were relevant to the topic. After screening the abstract and language, we got 2 systematic reviews and 4 articles. At the end, only 4 articles consisting of 1 systematic review and 3 articles were included to be appraised. Based on evidences, single layer uterine closure did not increase the risk of uterine rupture. Apart from that, shorter operative times and lower estimated blood loss became the superiority of single-layer uterine closure. [Int J Reprod Contracept Obstet Gynecol 2016; 5(7.000: 2074-2078

  17. First steps towards the realization of a double layer perceptron based on organic memristive devices

    Directory of Open Access Journals (Sweden)

    A. V. Emelyanov

    2016-11-01

    Full Text Available Memristors are widely considered as promising elements for the efficient implementation of synaptic weights in artificial neural networks (ANNs since they are resistors that keep memory of their previous conductive state. Whereas demonstrations of simple neural networks (e.g., a single-layer perceptron based on memristors already exist, the implementation of more complicated networks is more challenging and has yet to be reported. In this study, we demonstrate linearly nonseparable combinational logic classification (XOR logic task using a network implemented with CMOS-based neurons and organic memrisitive devices that constitutes the first step toward the realization of a double layer perceptron. We also show numerically the ability of such network to solve a principally analogue task which cannot be realized by digital devices. The obtained results prove the possibility to create a multilayer ANN based on memristive devices that paves the way for designing a more complex network such as the double layer perceptron.

  18. Turbulent mixing and layer formation in double-diffusive convection: 3D numerical simulations and theory

    CERN Document Server

    Rosenblum, Erica; Traxler, Adrienne; Stellmach, Stephan

    2010-01-01

    Double-diffusive convection, often referred to as semi-convection in astrophysics, occurs in thermally and compositionally stratified systems which are stable according to the Ledoux-criterion but unstable according to the Schwarzchild criterion. This process has been given relatively little attention so far, and its properties remain poorly constrained. In this paper, we present and analyze a set of three-dimensional simulations of this phenomenon in a Cartesian domain under the Boussinesq approximation. We find that in some cases the double-diffusive convection saturates into a state of homogeneous turbulence, but with turbulent fluxes several orders of magnitude smaller than those expected from direct overturning convection. In other cases the system rapidly and spontaneously develops closely-packed thermo-compositional layers, which later successively merge until a single layer is left. We compare the output of our simulations with an existing theory of layer formation in the oceanographic context, and fi...

  19. Acoustic radiation force on a double-layer microsphere by a Gaussian focused beam

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Rongrong; Cheng, Kaixuan; Liu, Jiehui; Mao, Yiwei; Gong, Xiufen [Key Laboratory of Modern Acoustics, Institute of Acoustics, Nanjing University, Nanjing 210093 (China); Liu, Xiaozhou, E-mail: xzliu@nju.edu.cn [Key Laboratory of Modern Acoustics, Institute of Acoustics, Nanjing University, Nanjing 210093 (China); State Key Laboratory of Acoustics, Institute of Acoustics, Chinese Academy of Sciences, Beijing 100190 (China)

    2014-10-14

    A new model for calculating the radiation force on double-layer microsphere is proposed based on the ray acoustics approach. The axial acoustic radiation force resulting from a focused Gaussian beam incident on spherical shells immersed in water is examined theoretically in relation to its thickness and the contents of its double-layer. The attenuation both in the water and inside the sphere is considered in this method, which cannot be ignored while the high frequency ultrasonic is used. Results of numerical calculations are presented for fat and low density polyethylene materials, with the hollow region filled with animal oil, water, or air. These results show how the acoustic impedance and the sound velocity of both layers, together with the thickness of the shell, affect the acoustic radiation force.

  20. Si/Ge double-layered nanotube array as a lithium ion battery anode.

    Science.gov (United States)

    Song, Taeseup; Cheng, Huanyu; Choi, Heechae; Lee, Jin-Hyon; Han, Hyungkyu; Lee, Dong Hyun; Yoo, Dong Su; Kwon, Moon-Seok; Choi, Jae-Man; Doo, Seok Gwang; Chang, Hyuk; Xiao, Jianliang; Huang, Yonggang; Park, Won Il; Chung, Yong-Chae; Kim, Hansu; Rogers, John A; Paik, Ungyu

    2012-01-24

    Problems related to tremendous volume changes associated with cycling and the low electron conductivity and ion diffusivity of Si represent major obstacles to its use in high-capacity anodes for lithium ion batteries. We have developed a group IVA based nanotube heterostructure array, consisting of a high-capacity Si inner layer and a highly conductive Ge outer layer, to yield both favorable mechanics and kinetics in battery applications. This type of Si/Ge double-layered nanotube array electrode exhibits improved electrochemical performances over the analogous homogeneous Si system, including stable capacity retention (85% after 50 cycles) and doubled capacity at a 3C rate. These results stem from reduced maximum hoop strain in the nanotubes, supported by theoretical mechanics modeling, and lowered activation energy barrier for Li diffusion. This electrode technology creates opportunities in the development of group IVA nanotube heterostructures for next generation lithium ion batteries.

  1. First steps towards the realization of a double layer perceptron based on organic memristive devices

    Science.gov (United States)

    Emelyanov, A. V.; Lapkin, D. A.; Demin, V. A.; Erokhin, V. V.; Battistoni, S.; Baldi, G.; Dimonte, A.; Korovin, A. N.; Iannotta, S.; Kashkarov, P. K.; Kovalchuk, M. V.

    2016-11-01

    Memristors are widely considered as promising elements for the efficient implementation of synaptic weights in artificial neural networks (ANNs) since they are resistors that keep memory of their previous conductive state. Whereas demonstrations of simple neural networks (e.g., a single-layer perceptron) based on memristors already exist, the implementation of more complicated networks is more challenging and has yet to be reported. In this study, we demonstrate linearly nonseparable combinational logic classification (XOR logic task) using a network implemented with CMOS-based neurons and organic memrisitive devices that constitutes the first step toward the realization of a double layer perceptron. We also show numerically the ability of such network to solve a principally analogue task which cannot be realized by digital devices. The obtained results prove the possibility to create a multilayer ANN based on memristive devices that paves the way for designing a more complex network such as the double layer perceptron.

  2. Analysis of characteristics of sound radiation from double cylindrical shell coated with viscoelastic layer

    Institute of Scientific and Technical Information of China (English)

    CHEN Meixia; LUO Dongping; PENG Xu; LUO Bin

    2004-01-01

    The characteristics of vibration and sound radiation from a double shell with the outer shell coated with viscoelastic layer are systematically studied. The shell's motion funcby three-dimensional Navier equations, whose displacement solutions are expressed by Taylor expansion along the layer thickness. The continuity conditions of displacement and stress between the shell and the layers are used in obtaining the vibration equations. The effects of layer thickness, modulus of elasticity, the loss factor, and the hydro-compressibility on the structural acoustic characteristic are discussed in detail. It showed that the higher the modulus of elasticity is, or the thinner the thickness of layer is, or the smaller the loss factor is, the higher the sound radiation power is.

  3. Design, fabrication and characterization of a double layer solid oxide fuel cell (DLFC)

    Science.gov (United States)

    Wang, Guangjun; Wu, Xiangying; Cai, Yixiao; Ji, Yuan; Yaqub, Azra; Zhu, Bin

    2016-11-01

    A double layer solid oxide fuel cell (DLSOFC) without using the electrolyte (layer) has been designed by integrating advantages of positive electrode material of lithium ion battery(LiNi0.8Co0.15Al0.05O2) and oxygen-permeable membranes material (trace amount cobalt incorporated terbium doped ceria, TDC + Co) based on the semiconductor physics principle. Instead of using an electrolyte layer, the depletion layer between the anode and cathode served as an electronic insulator to block the electrons but to maintain the electrolyte function for ionic transport. Thus the device with two layers can realize the function of SOFC and at the same time avoids the electronic short circuiting problem. Such novel DLFC showed good performance at low temperatures, for instance, a maximum power density of 230 mWcm-2 was achieved at 500 °C. The working principle of the new device is presented.

  4. Nonlinear Localization due to a Double Negative Defect Layer in a One-Dimensional Photonic Crystal Containing Single Negative Material Layers

    Institute of Scientific and Technical Information of China (English)

    Munazza Zulfiqar Ali; Tariq Abdullah

    2008-01-01

    We investigate the effects of introducing a defect layer in a one-dimensional photonic crystal containing single negative material layers on the transmission properties.The width of the defect layer js taken to be the same or smaller than the period of the structure.Different cases of the defect layer being linear or nonlinear and double positive or double negative are discussed.It is found that only a nonlinear double negative layer givas rises to a localized mode within the zero-φeff gap in this kind of structure.It is also shown that the important characteristics of the nonlinear defect mode such as its frequency,its FWHM and the threshold of the associated bistability can be controlled by changing the widths of the defect layer and the host layers.

  5. The Equivalent Electrokinetic Circuit Model of Ion Concentration Polarization Layer: Electrical Double Layer, Extended Space Charge and Electro-convection

    Science.gov (United States)

    Cho, Inhee; Huh, Keon; Kwak, Rhokyun; Lee, Hyomin; Kim, Sung Jae

    2016-11-01

    The first direct chronopotentiometric measurement was provided to distinguish the potential difference through the extended space charge (ESC) layer which is formed with the electrical double layer (EDL) near a perm-selective membrane. From this experimental result, the linear relationship was obtained between the resistance of ESC and the applied current density. Furthermore, we observed the step-wise distributions of relaxation time at the limiting current regime, confirming the existence of ESC capacitance other than EDL's. In addition, we proposed the equivalent electrokinetic circuit model inside ion concentration polarization (ICP) layer under rigorous consideration of EDL, ESC and electro-convection (EC). In order to elucidate the voltage configuration in chronopotentiometric measurement, the EC component was considered as the "dependent voltage source" which is serially connected to the ESC layer. This model successfully described the charging behavior of the ESC layer with or without EC, where both cases determined each relaxation time, respectively. Finally, we quantitatively verified their values utilizing the Poisson-Nernst-Planck equations. Therefore, this unified circuit model would provide a key insight of ICP system and potential energy-efficient applications.

  6. The effects of rotation on a double-diffusive layer in a rotating spherical shell

    CERN Document Server

    Blies, Patrick; Zaussinger, Florian; Hollerbach, Rainer

    2014-01-01

    So far, numerical studies of double-diffusive layering in turbulent convective flows have neglected the effects of rotation. We undertake a first step into that direction by investigating how Coriolis forces affect a double-diffusive layer inside a rotating spherical shell. For this purpose we have run simulations in a parameter regime where these layers are expected to form and successively increased the rate of rotation with the result that fast rotation is found to have a similar stabilising effect on the overall convective flux as an increase of the stability ratio $R_{\\rho}$ has in a non-rotating setup. We have also studied to what extent the regimes of rotational constraints suggested by King, Stellmach, and Buffett (2013) for rotation in the case of Rayleigh-B\\'enard convection are influenced by double-diffusive convection: their classification could also be applicable to the case of double-diffusive convection in a spherical shell if it is extended to be also a function of the stability ratio $R_{\\rho...

  7. Synthesis of Zn–Fe layered double hydroxides via an oxidation process and structural analysis of products

    Energy Technology Data Exchange (ETDEWEB)

    Morimoto, Kazuya, E-mail: kazuya.morimoto@aist.go.jp [Institute for Geo-Resources and Environment, National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Higashi, Tsukuba, Ibaraki 305-8567 (Japan); Tamura, Kenji [Environmental Remediation Materials Unit, National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044 (Japan); Anraku, Sohtaro [Graduate School of Engineering, Hokkaido University, Kita 13 Nishi 8, Kita-ku, Sapporo 060-8628 (Japan); Sato, Tsutomu [Faculty of Engineering, Hokkaido University, Kita 13 Nishi 8, Kita-ku, Sapporo 060-8628 (Japan); Suzuki, Masaya [Institute for Geo-Resources and Environment, National Institute of Advanced Industrial Science and Technology (AIST), 1-1-1 Higashi, Tsukuba, Ibaraki 305-8567 (Japan); Yamada, Hirohisa [Environmental Remediation Materials Unit, National Institute for Materials Science (NIMS), 1-1 Namiki, Tsukuba, Ibaraki 305-0044 (Japan)

    2015-08-15

    The synthesis of Zn–Fe(III) layered double hydroxides was attempted, employing different pathways using either Fe(II) or Fe(III) species together with Zn as the initial reagents. The product derived from the synthesis employing Fe(II) was found to transition to a Zn–Fe(III) layered double hydroxides phase following oxidation process. In contrast, the product obtained with Fe(III) did not contain a layered double hydroxides phase, but rather consisted of simonkolleite and hydrous ferric oxide. It was determined that the valency of the Fe reagent used in the initial synthesis affected the generation of the layered double hydroxides phase. Fe(II) species have ionic radii and electronegativities similar to those of Zn, and therefore are more likely to form trioctahedral hydroxide layers with Zn species. - Graphical abstract: The synthesis of Zn–Fe(III) layered double hydroxides was attempted, employing different pathways using either Fe(II) or Fe(III) species together with Zn as the initial reagents. - Highlights: • Iron valency affected the generation of Zn–Fe layered double hydroxides. • Zn–Fe layered double hydroxides were successfully synthesized using Fe(II). • Fe(II) species were likely to form trioctahedral hydroxide layers with Zn species.

  8. Superhydrophobic and UV-blocking cotton fabrics prepared by layer-by-layer assembly of organic UV absorber intercalated layered double hydroxides

    Science.gov (United States)

    Zhao, Yan; Xu, Zhiguang; Wang, Xungai; Lin, Tong

    2013-12-01

    A dual-functional coating with both superhydrophobic and UV-blocking properties was prepared on cotton fabric using a hybrid layered double hydroxide (LDH) nanoplatelet intercalated with 2-hydroxy-4-methoxybenzophenone-5-sulfonic acid (HMBS) molecules and an electrostatic layer-by-layer (LbL) assembly technique. The thermal stability of HMBS was greatly enhanced by the host-guest interaction with LDH layers. The as-prepared HMBS@LDH hybrid had a nearly neutral surface charge. To make it carry enough charge for the electrostatic LbL assembly, the HMBS@LDH nanoplatelet was further modified with 3-aminopropyltriethoxy silane. The nanoscale roughness generated by LDH nanoplatelets, together with low-surface-energy fluoroalkylsilane, endowed cotton fabrics with superhydrophobicity. The HMBS@LDH coating showed up to four-fold increase in the UV protection ability of cotton fabrics.

  9. Double injection, resonant-tunneling recombination, and current-voltage characteristics in double-graphene-layer structures

    Energy Technology Data Exchange (ETDEWEB)

    Ryzhii, M. [Department of Computer Science and Engineering, University of Aizu, Aizu-Wakamatsu 965-8580 (Japan); Ryzhii, V. [Research Institute for Electrical Communication, Tohoku University, Sendai 980-8577 (Japan); Institute of Ultra High Frequency Semiconductor Electronics, Russian Academy of Sciences, Moscow 111005 (Russian Federation); Otsuji, T. [Research Institute for Electrical Communication, Tohoku University, Sendai 980-8577 (Japan); Maltsev, P. P. [Institute of Ultra High Frequency Semiconductor Electronics, Russian Academy of Sciences, Moscow 111005 (Russian Federation); Leiman, V. G. [Moscow Institute of Physics and Technology, Dolgoprudny, Moscow Region 141700 (Russian Federation); Ryabova, N. [Department of Computer Science and Engineering, University of Aizu, Aizu-Wakamatsu 965-8580 (Japan); Center for Photonics and Infrared Engineering, Bauman Moscow State Technical University, Moscow 105005 (Russian Federation); Mitin, V. [Department of Electrical Engineering, University at Buffalo, Buffalo, New York 1460-1920 (United States)

    2014-01-14

    We evaluate the effect of the recombination associated with interlayer transitions in ungated and gated double-graphene-layer (GL) structures on the injection of electrons and holes. Using the proposed model, we derive analytical expressions for the spatial distributions of the electron and hole Fermi energies and the energy gap between the Dirac points in GLs as well as their dependences on the bias and gate voltages. The current-voltage characteristics are calculated as well. The model is based on hydrodynamic equations for the electron and hole transports in GLs under the self-consistent electric field. It is shown that in undoped double-GL structures with weak scattering of electrons and holes on disorder, the Fermi energies and the energy gap are virtually constant across the main portions of GLs, although their values strongly depend on the voltages and recombination parameters. In contrast, the electron and hole scattering on disorder lead to substantial nonuniformities. The resonant inter-GL tunneling enables N-shaped current-voltage characteristics provided that GLs are sufficiently short. The width of the current maxima is much larger than the broadening of the tunneling resonance. In the double-GL structures with relatively long GLs, the N-shaped characteristics transform into the Z-shaped characteristics. The obtained results are in line with the experimental observations [Britnell et al., Nat. Commun. 4, 1794–1799 (2013)] and might be useful for design and optimization of different devices based on double-GL structures, including field-effect transistors and terahertz lasers.

  10. Pore Pressure Response to Groundwater Fluctuations in Saturated Double-Layered Soil

    Directory of Open Access Journals (Sweden)

    Hongwei Ying

    2015-01-01

    Full Text Available Analytical solutions are developed for one-dimensional consolidation of double-layered saturated soil subjected to groundwater fluctuations. The solutions are derived by an explicit mathematical procedure using Duhamel’s theorem in conjunction with a Fourier series, when groundwater fluctuation is described by a general time-dependent function and assumed to be the pore water pressure variations at the upper boundary. Taking as an example the harmonic groundwater fluctuation, the relevant response of the excess pore water pressure is discussed in detail, and the main influencing factors of the excess pore pressure distribution are analyzed. A dimensionless parameter θ has been introduced because it significantly affects the phase and the amplitude of excess pore pressures. The influences of the coefficients of permeability and compressibility of soil on the excess pore pressure distribution are different and cannot be incorporated into the coefficient of consolidation in double-layered soil. The relative permeability ratio of two clayey soils also plays an important role on the curves of the distributions of the excess pore pressures. The effects of the thickness of the soil layer on the excess pore pressure distribution should be considered together with the dimensionless parameter θ and the permeability and compressibility of the double-layered soil system.

  11. Arrangements of a pair of loudspeakers for sound field control with double-layer arrays

    DEFF Research Database (Denmark)

    Chang, Jiho; Agerkvist, Finn T.; Olsen, Martin

    2013-01-01

    Recent studies have attempted to control sound fields, and also to reduce room reflections with a circular or spherical array of loudspeakers. One of the attempts was to suppress sound waves propagating to the walls outside the array with a circular double-layer array of loudspeakers. The double....... In order to solve this problem, this study aims to examine several arrangements of a pair of loudspeakers that has a short distance between the acoustic centres. The effect of diffraction of sound waves due to the enclosure of another loudspeaker is investigated in simulations in terms of the position...

  12. Free Energy Relationships in the Electrical Double Layer over Single-Layer Graphene

    Energy Technology Data Exchange (ETDEWEB)

    Achtyl, Jennifer L. [Northwestern University, Evanston; Vlassiouk, Ivan V [ORNL; Fulvio, Pasquale F [ORNL; Mahurin, Shannon Mark [ORNL; Dai, Sheng [ORNL; Geiger, Franz M. [Northwestern University, Evanston

    2013-01-01

    Fluid/solid interfaces containing singlelayer graphene are important in the areas of chemistry, physics, biology, and materials science, yet this environment is difficult to access with experimental methods, especially under flow conditions and in a label-free manner. Herein, we demonstrate the use of second harmonic generation to quantify the interfacial free energy at the fused silica/single-layer graphene/water interface at pH 7 and under conditions of flowing aqueous electrolyte solutions ranging in NaCl concentrations from 10 4 to 10 1 M. Our analysis reveals that single-layer graphene reduces the interfacial free energy density of the fused silica/water interface by a factor of up to 7, which is substantial given that many interfacial processes, including those that are electrochemical in nature, are exponentially sensitive to interfacial free energy density.

  13. Micrometer-Thick Graphene Oxide-Layered Double Hydroxide Nacre-Inspired Coatings and Their Properties.

    Science.gov (United States)

    Yan, You-Xian; Yao, Hong-Bin; Mao, Li-Bo; Asiri, Abdullah M; Alamry, Khalid A; Marwani, Hadi M; Yu, Shu-Hong

    2016-02-10

    Robust, functional, and flame retardant coatings are attractive in various fields such as building construction, food packaging, electronics encapsulation, and so on. Here, strong, colorful, and fire-retardant micrometer-thick hybrid coatings are reported, which can be constructed via an enhanced layer-by-layer assembly of graphene oxide (GO) nanosheets and layered double hydroxide (LDH) nanoplatelets. The fabricated GO-LDH hybrid coatings show uniform nacre-like layered structures that endow them good mechanic properties with Young's modulus of ≈ 18 GPa and hardness of ≈ 0.68 GPa. In addition, the GO-LDH hybrid coatings exhibit nacre-like iridescence and attractive flame retardancy as well due to their well-defined 2D microstructures. This kind of nacre-inspired GO-LDH hybrid thick coatings will be applied in various fields in future due to their high strength and multifunctionalities.

  14. Synthesis and structure refinement of layered double hydroxides of Co, Mg and Ni with Ga

    Indian Academy of Sciences (India)

    G V Manohara; P Vishnu Kamath

    2010-06-01

    Homogeneous precipitation by urea hydrolysis results in the formation of highly ordered layered double hydroxides of divalent metal ions (Co, Mg, Ni) and Ga. Structure refinement shows that these carbonate containing layered hydroxides crystallize with rhombohedral symmetry (space group -3) in the structure of the 31 polytype. An analysis of the structure shows that, coulombic attraction between the layer and interlayer remains invariant in different layered hydroxides, whereas the strength of hydrogen bonding varies. The Ni–Ga LDH has the weakest hydrogen bonding and Co–Ga, the strongest, as reflected by the layer–interlayer oxygen–oxygen distances. The poor polarity of the OH bond in the Ni–Ga hydroxide points to the greater covalency of the (2+}/′3+)-oxygen bond in this compound as opposed to the Co–Ga hydroxide. These observations are supported by IR spectra.

  15. Mechanisms governing the interfacial delamination of thermal barrier coating system with double ceramic layers

    Science.gov (United States)

    Xu, Rong; Fan, Xueling; Wang, T. J.

    2016-05-01

    A systematic study of factors affecting the interfacial delamination of thermal barrier coating system (TBCs) with double ceramic layers (DCL) is presented. Crack driving forces for delaminations at two weak interfaces are examined. The results show that a thicker outermost ceramic layer can induce dramatic increase in crack driving force and make the interface between two ceramic coatings become more prone to delamination. The behavior is shown to be more prominent in TBCs with stiffer outmost coating. The thickness ratio of two ceramic layers is an important parameter for controlling the failure mechanisms and determining the lifetime of DCL TBCs under inservice condition. By accounting for the influences of thickness ratio of two ceramic layers and interfacial fracture toughnesses of two involved interfaces, the fracture mechanism map of DCL TBCs has been constructed, in which different failure mechanisms are identified. The results quanlitatively agree with the aviliable experimental data.

  16. The Comparison of Engineering Properties Between Single and Double Layer Porous Asphalt made of Packing Gradation

    Directory of Open Access Journals (Sweden)

    Hardiman M. Y

    2008-01-01

    Full Text Available is paper presents the comparison of engineering properties between single and double layer porous asphalt (SLPA and DLPA made of packing gradation. Three nominal maximum aggregate sizes (NMAS were tested each made up of 10, 14, and 20 mm for SLPA. While for the DLPA with 30, 20, and 15 mm top layer are made of 10 and 14 mm NMAS, with a base layer of 20 mm NMAS. Total thickness of all mixes is 70 mm. Binders used are 60/70 penetration base bitumen and polymer binder styrene-butadiene-styrene (SBS. The result shows that the properties of SLPA mix namely permeability and resistance to abrasion loss decreases when the NMAS in SLPA decreases. The abrasion loss of DLPA mixes increases when the porous asphalt top layer thickness decreases, while drainage time value decreases. However, SLPA with 20 mm NMAS exhibits higher abrasion loss compared to all DLPA mixes.

  17. Interstratified nanohybrid assembled by alternating cationic layered double hydroxide nanosheets and anionic layered titanate nanosheets with superior photocatalytic activity.

    Science.gov (United States)

    Lin, Bizhou; Sun, Ping; Zhou, Yi; Jiang, Shaofeng; Gao, Bifen; Chen, Yilin

    2014-09-15

    Oppositely charged 2D inorganic nanosheets of ZnAl-layered double hydroxide and layered titanate were successfully assembled into an interstratified nanohybrid through simply mixing the corresponding nanosheet suspensions. Powder X-ray diffraction and high-resolution transmission electron microscope clearly revealed that the component nanosheets in the as-obtained nanohybrid ZnAl-Ti3O7 retain the 2D sheet skeletons of the pristine materials and that the two kinds of nanosheets are well arranged in a layer-by-layer alternating fashion with a basal spacing of about 1.3 nm, coincident with the thickness summation of the two component nanosheets. The effective interfacial heterojunction between them and the high specific surface area resulted in that the nanohybrid exhibits a superior photocatalytic activity in the degradation of methylene blue with a reaction constant k of 2.81 × 10(-2)min(-1), which is about 9 and 4 times higher than its precursors H2Ti3O7 and ZnAl-LDH, respectively. Based on UV-vis, XPS and photoelectrochemical measurements, a proposed photoexcitation model was provided to understand its photocatalytic behavior.

  18. Numerical well testing interpretation model and applications in crossflow double-layer reservoirs by polymer flooding.

    Science.gov (United States)

    Yu, Haiyang; Guo, Hui; He, Youwei; Xu, Hainan; Li, Lei; Zhang, Tiantian; Xian, Bo; Du, Song; Cheng, Shiqing

    2014-01-01

    This work presents numerical well testing interpretation model and analysis techniques to evaluate formation by using pressure transient data acquired with logging tools in crossflow double-layer reservoirs by polymer flooding. A well testing model is established based on rheology experiments and by considering shear, diffusion, convection, inaccessible pore volume (IPV), permeability reduction, wellbore storage effect, and skin factors. The type curves were then developed based on this model, and parameter sensitivity is analyzed. Our research shows that the type curves have five segments with different flow status: (I) wellbore storage section, (II) intermediate flow section (transient section), (III) mid-radial flow section, (IV) crossflow section (from low permeability layer to high permeability layer), and (V) systematic radial flow section. The polymer flooding field tests prove that our model can accurately determine formation parameters in crossflow double-layer reservoirs by polymer flooding. Moreover, formation damage caused by polymer flooding can also be evaluated by comparison of the interpreted permeability with initial layered permeability before polymer flooding. Comparison of the analysis of numerical solution based on flow mechanism with observed polymer flooding field test data highlights the potential for the application of this interpretation method in formation evaluation and enhanced oil recovery (EOR).

  19. Numerical Well Testing Interpretation Model and Applications in Crossflow Double-Layer Reservoirs by Polymer Flooding

    Directory of Open Access Journals (Sweden)

    Haiyang Yu

    2014-01-01

    Full Text Available This work presents numerical well testing interpretation model and analysis techniques to evaluate formation by using pressure transient data acquired with logging tools in crossflow double-layer reservoirs by polymer flooding. A well testing model is established based on rheology experiments and by considering shear, diffusion, convection, inaccessible pore volume (IPV, permeability reduction, wellbore storage effect, and skin factors. The type curves were then developed based on this model, and parameter sensitivity is analyzed. Our research shows that the type curves have five segments with different flow status: (I wellbore storage section, (II intermediate flow section (transient section, (III mid-radial flow section, (IV crossflow section (from low permeability layer to high permeability layer, and (V systematic radial flow section. The polymer flooding field tests prove that our model can accurately determine formation parameters in crossflow double-layer reservoirs by polymer flooding. Moreover, formation damage caused by polymer flooding can also be evaluated by comparison of the interpreted permeability with initial layered permeability before polymer flooding. Comparison of the analysis of numerical solution based on flow mechanism with observed polymer flooding field test data highlights the potential for the application of this interpretation method in formation evaluation and enhanced oil recovery (EOR.

  20. Measurement of the magnetic induction vector in superconductors using a double-layer Hall sensor array

    Science.gov (United States)

    Abulafia, Y.; McElfresh, M.; Shaulov, A.; Yeshurun, Y.; Paltiel, Y.; Majer, D.; Shtrikman, H.; Zeldov, E.

    1998-06-01

    We describe an experimental technique for simultaneous measurement of both the normal (Bz) and the in-plane (Bx) components of the magnetic induction field near the surface of a superconducting sample. This technique utilizes a novel design of a double-layered Hall sensor array fabricated from a GaAs/AlGaAs heterostructure containing two parallel layers of a two-dimensional electron gas. The effectiveness of this technique is demonstrated in measurements of Bx and Bz and the current distribution at the surface of a thin YBa2Cu3O7 crystal.

  1. Adsorption and intercalation of anionic surfactants onto layered double hydroxides—XRD study

    Indian Academy of Sciences (India)

    R Anbarasan; W D Lee; S S Im

    2005-04-01

    Layered double hydroxides (LDH) with brucite like structure was modified with various anionic surfactants containing sulfonate, carboxyl, phosphonate and sulfate end group through ion-exchange method. XRD reports indicated that the sulfonate group containing surfactants led to an adsorption process whereas the sulfate, carboxyl and phosphonate group containing surfactant led to an intercalation process. This can be evidenced from the change in basal spacing of LDH. The presence of anionic surfactants in the LDH was supported by FTIR spectroscopy. The FTIR spectrum indicated that complete removal of carbonate anion from the inter layer space of LDH is very difficult. The phosphonate intercalated HT showed less thermal stability than pristine LDH.

  2. Synthesis and Characterization of Layered Double Hydroxides Containing Optically Active Transition Metal Ion

    Science.gov (United States)

    Tyagi, S. B.; Kharkwal, Aneeta; Nitu; Kharkwal, Mamta; Sharma, Raghunandan

    2017-01-01

    The acetate intercalated layered double hydroxides of Zn and Mn, have been synthesized by chimie douce method. The materials were characterized by XRD, TGA, CHN, IR, XPS, SEM-EDX and UV-visible spectroscopy. The photoluminescence properties was also studied. The optical properties of layered hydroxides are active transition metal ion dependent, particularly d1-10 system plays an important role. Simultaneously the role of host - guest orientation has been considered the basis of photoluminescence. Acetate ion can be exchanged with iodide and sulphate ions. The decomposed product resulted the pure phase Mn doped zinc oxide are also reported.

  3. Dust-ion-acoustic Gardner double layers in a dusty plasma with two-temperature electrons

    Indian Academy of Sciences (India)

    M M Masud; I Tasnim; A A Mamun

    2015-01-01

    The properties of dust-ion-acoustic Gardner double layers (DIA GDLs) in an unmagnetized dusty plasma, whose constituents are negatively-charged stationary dust, inertial ions, and Boltzmann electrons of two distinct temperatures, are rigorously investigated by employing the reductive perturbation method: Gardner approach. The standard Gardner equation is derived, and its double layer (DL) solution is obtained. It has been shown that the properties of the DIA GDLs are significantly modified by some plasma parameters (viz. = e1/e2, e1 = e10/i0, and e2 = e20/i0, where e1 (e2) is the cold (hot) electron temperature, e10 (e20) is the cold (hot) electron number density at equilibrium, and i0 is the ion number density at equilibrium). The implications of our investigation in understanding the basic features of nonlinear electrostatic perturbations observed in many space plasma systems and laboratory devices are briefly discussed.

  4. Resistivity due to weak double layers - A model for auroral arc thickness

    Science.gov (United States)

    Prakash, Manju; Lysak, Robert L.

    1992-01-01

    We have calculated the resistivity due to a sequence of fluctuating weak double layers aligned parallel to the ambient magnetic field line. The average response of an electron drifting through a 1D randomly oriented array of WDLs is studied using a test particle approach. The average is taken over the randomly fluctuating values of the electric field associated with the double layers. Based on our calculations, we estimate that a 350 eV electron energy the thickness of the visual auroral arc is about 2.5 km and that of the auroral fine structure as about 250 m when mapped down to the ionosphere. The significance of our calculations is discussed in the context of magnetosphere-ionosphere coupling.

  5. Four-Electron Systems in a Coupled Double-Layer Quantum Dots

    Institute of Scientific and Technical Information of China (English)

    XIE Wen-Fang

    2003-01-01

    Making use of the method of few-body physics, the energy spectrum of a four-electron system consisting in a vertically coupled double-layer quantum dot as a function of the strength ofa magnetic field is investigated. Discontinuous ground-state transitions induced by an external magnetic field are shown. We find that, in the strong coupling case, the ground-state transitions depend not only on the external magnetic field B but also on the distance d between double-layer quantum dots. However, in the case of weak coupling, the ground-state transitions occur in the new sequence of the values of the magic angular momentum. Hence, the interlayer separation d and electron-electron interaction strongly affect the ground state of the coupled quantum dots.

  6. Controlling spin-orbit interaction in a ferromagnetic Fe/Au double layer

    Science.gov (United States)

    Samarin, Sergey N.; Artamonov, Oleg M.; Baraban, Alexander P.; Kostylev, Mikhail; Guagliardo, Paul; Williams, James F.

    2015-01-01

    Using spin-polarized single- and two-electron spectroscopy, we probe exchange and spin-orbit interaction in a double layer of Fe and Au on W(110) and measure the spin asymmetry of the Bloch spectral density function of the sample. In a 5 ML iron film, the spin-orbit contribution to the measured asymmetry of the (e,2e) spectra was not detectable, whereas a deposition of about 1 ML of gold introduced a substantial spin-orbit component in the measured asymmetry. At the same time, this double layer still exhibits ferromagnetic properties: (i) the spectral density function asymmetry demonstrate imbalance of spin-up and spin-down electron densities in the valence band and (ii) the Stoner excitation asymmetry has almost the same value as in a pure Fe film.

  7. Controlling spin–orbit interaction in a ferromagnetic Fe/Au double layer

    Energy Technology Data Exchange (ETDEWEB)

    Samarin, Sergey N.; Kostylev, Mikhail; Williams, James F. [School of Physics, The University of Western Australia, Perth, Western Australia 6009 (Australia); Artamonov, Oleg M.; Baraban, Alexander P. [Research Institute of Physics, St. Petersburg State University, St. Petersburg 199034 (Russian Federation); Guagliardo, Paul [Centre for Microscopy, Characterisation and Analysis, the University of Western Australia, Perth, Western Australia 6009 (Australia)

    2015-01-26

    Using spin-polarized single- and two-electron spectroscopy, we probe exchange and spin–orbit interaction in a double layer of Fe and Au on W(110) and measure the spin asymmetry of the Bloch spectral density function of the sample. In a 5 ML iron film, the spin-orbit contribution to the measured asymmetry of the (e,2e) spectra was not detectable, whereas a deposition of about 1 ML of gold introduced a substantial spin-orbit component in the measured asymmetry. At the same time, this double layer still exhibits ferromagnetic properties: (i) the spectral density function asymmetry demonstrate imbalance of spin-up and spin-down electron densities in the valence band and (ii) the Stoner excitation asymmetry has almost the same value as in a pure Fe film.

  8. Inclusion of poly-aromatic hydrocarbon (PAH) molecules in a functionalized layered double hydroxide

    Indian Academy of Sciences (India)

    L Mohanambe; S Vasudevan

    2006-01-01

    The internal surface of an Mg-Al layered double hydroxide has been functionalized by anchoring carboxy-methyl derivatized -cyclodextrin cavities to the gallery walls. Neutral polyaromatic hydrocarbon (PAH) molecules have been included within the functionalized solid by driving the hydrophobic aromatic molecules from a polar solvent into the less polar interior of the anchored cyclodextrin cavities by a partitioning process. The optical (absorption and emission) properties of the PAH molecules included within the functionalized Mg-Al layered double hydroxide solid are similar to that of dilute solutions of the PAH in non-polar solvents. The unique feature of these hybrid materials is that they are thermally stable over a wide temperature range with their emission properties practically unaltered.

  9. Synthesis and carbon dioxide sorption of layered double hydroxide/silica foam nanocomposites with hierarchical mesostructure

    KAUST Repository

    Fu, Liling

    2014-03-05

    Layered double hydroxides (LDHs) with a hierarchical mesostructure are successfully synthesized on mesoporous silica foams by simple impregnation and hydrothermal treatment. The as-synthesized LDH/silica foam nanocomposites show well-defined mesostructures with high surface areas, large pore volumes, and mesopores of 6-7 nm. The nanocomposites act as carbon dioxide (CO2) sorbents under simulated flue gas conditions. They also exhibit significantly enhanced CO2 capacities under high-pressure conditions and high CO2/N2 and CO2/CH4 selectivities. Respect the hierarchy: Hierarchical mesoporous layered double hydroxide (LDH) nanocomposites with high surface areas and large pore volumes are synthesized by controlled hydrothermal growth of LDH precursors on a mesoporous silica foam. The as-synthesized nanocomposites exhibit a significantly enhanced capacity and selectivity towards carbon dioxide, making them very promising candidates for carbon dioxide (CO2) separation applications. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Influence of electric double layer on thin film lubrication and elastohydrodynamic lubrication

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    In the present paper, the influence of electric double layer (EDL) on thin film lubricationand elastohydrodynamic lubrication is studied. With modified Reynolds equation for electric doublelayer, the effect of zeta-potential on the film thickness and pressure is numerically calculated. Theresults show that the influence of electric double layer on the lubrication film thickness is significantonly for thin film. The minimum film thickness will increase greatly if the influence of EDL is con-sidered. As the initial film thickness increases, the effect will greatly decrease. The existence ofEDL will decrease the friction coefficient of the lubrication film. Furthermore, the above tendency isstill applicable even if the materials of the friction pair are different.

  11. Topology optimization of double- and triple-layer grids using a hybrid methodology

    Science.gov (United States)

    Dehghani, M.; Mashayekhi, M.; Salajegheh, E.

    2016-08-01

    In this article, a hybrid methodology combining evolutionary structural optimization (ESO) and gravitational particle swarm (GPS) methods is proposed for topology optimization of double- and triple-layer grids. In the present methodology, which is called the ESO-GPS method, the size optimization of double- and triple-layer grids is first performed by ESO. Then, the outcomes of the ESO are used to improve the GPS through four modifications. Structural weight is minimized against constraints on the displacements of nodes, internal stresses and element slenderness ratio. The GPS is used to investigate the optimum topology of large-scale skeletal structures with discrete variables whose agents update their respective positions by the particle swarm optimization velocity and the acceleration of the gravitational search algorithm. The numerical results show that the proposed algorithm, the ESO-GPS, performs better than the GPS and the other methods presented in the literature.

  12. Spatially Resolved Measurements of a Double Layer in an Argon Helicon Plasma

    Science.gov (United States)

    Aguirre, Evan; Siddiqui, Umair; McKee, John; Scime, Earl

    2015-11-01

    We report 2-dimensional, spatially resolved observations of a double layer in an expanding helicon plasma. These new measurements investigate the origins of previously observed multiple ion beam populations in the downstream plasma. We use Laser Induced Fluorescence (LIF) to measure the ion velocity distribution functions (IVDFs) of argon ions and neutrals both parallel and perpendicular to the background magnetic field and an rf-compensated Langmuir probe to determine the local plasma potential. These are the first multi-dimensional LIF measurements of ion acceleration in a current-free double layer and were obtained with a recently installed, internal scanning probe system in the HELIX-LEIA experimental facility. This work is supported by US National Science Foundation grant number PHY-1360278.

  13. A new double layer epoxy coating for corrosion protection of Petroleum Equipments

    Directory of Open Access Journals (Sweden)

    Maher A. El Sockarya

    2014-11-01

    Full Text Available Homogeneous epoxy coating containing polymer nanocomposite (PNC was successfully synthesized and applied on carbon steel substrates by room temperature curing of fully mixed epoxy slurry. (PNC containing both ZNO nanoparticles and epoxy hyper branched polymer (EHBP, a new double layer thin film which comprises ZNO-epoxy as a primer coat and ZNO-EHBP-epoxy as a top coat offers better corrosion protection compared to the purely inorganic ZNO-epoxy coating and hybrid ZNO-EHBP-epoxy coating. Chemical structures of synthesized compounds were confirmed by FTIR, H1NMR spectroscopy and GPC. The surface morphology and phase structure of the produced Zno nanoparticles were characterized by scanning electron microscopy SEM, transmission electron microscopy TEM and X-ray diffraction. Chemical resistance of theses coatings to NaOH and HCL was investigated. The effect of incorporating polymer nanocomposite and new double layer coating on corrosion resistance of epoxy coated steel was investigated by salt spray test.

  14. Multianalyte electrochemical biosensor on a monolith electrode by optically scanning the electrical double layer.

    Science.gov (United States)

    Lee, Seung-Woo; Saraf, Ravi F

    2014-07-15

    Redox on an electrode is an interfacial phenomenon that modulates the charge in the electrical double layer (EDL). A novel instrument, the Scanning Electrometer for Electrical Double-layer (SEED) has been developed to measure multiple enzyme reactions on a monolith electrode due to immunospecific binding with a mixture of respective analytes. SEED quantitatively maps the local redox reaction by scanning a laser on the array of enzyme monolayer spots immobilized on the monolith electrode. SEED measures the change in local charge state of the EDL that abruptly changes due to the redox reaction. The measurement spot size defined by the size of the laser beam is ~10 µm. The SEED signal is linearly proportional to the local redox current density and analyte concentration. The specificity is close to 100%. The SEED readout is compatible with microfluidics platform where the signal degrades less than 2% due to the poly(dimethyl siloxane) (PDMS) body.

  15. Surface deformation and geoid anomalies over single and double-layered convective systems

    Science.gov (United States)

    Koch, M.; Yuen, D. A.

    1985-01-01

    Using a primitive variable formulation of the finite-element method, the differences in the surface observables, such as topography and geoid, produced by single- and double-layered thermal convection, were compared. Both constant and depth-dependent viscosities have been considered. For the same Rayleigh number, larger surface perturbations are produced by single-cell convection. For the same Nusselt number, the magnitudes of the surface observables are greater for double-layered convection. For the same surface heat-flux, surface topographies have similar magnitudes, but the relative amplitudes of geoid anomalies depend greatly on the style of viscosity stratification. This difference in the geoid between the two systems increases with greater surface heat-flow, regardless of viscosity structure.

  16. Hybrid magnetic materials based on layered double hydroxides: from the chemistry towards the applications

    OpenAIRE

    ABELLÁN SÁEZ, GONZALO

    2014-01-01

    Layered double hydroxides (LDHs) are the leitmotiv of this dissertation. Contradicting the assertion that “any past was better”, LDHs have been continuously revisited from the middle of the twentieth century, and represent an excellent example of the never-ending beauty of Chemistry. New synthetic perspectives are giving a new impetus to LDH chemistry, which among hybrid materials, are finding their heyday. This is resulting in novel materials and also paving the way for new fundamental and p...

  17. Tunable Electronic Transport Properties of 2D Layered Double Hydroxide Crystalline Microsheets with Varied Chemical Compositions.

    Science.gov (United States)

    Zhao, Yibing; Hu, Hai; Yang, Xiaoxia; Yan, Dongpeng; Dai, Qing

    2016-09-01

    Transistors based on layered double hydroxides (LDH) single microcrystal are fabricated, whose conductivity of LDH can be tuned by varying metal cations or interlayer anions, but weakly affected by external electric field. The carrier mobility can reach about 1 × 10(-5) cm(2) V(-1) s(-1) , a value comparable to that of organic C60-based transistors. This work paves a way for future electrical applications of LDH.

  18. Magnetic Properties of Ferromagnetic Double Layers with Ferrimagnetic Interlayer Coupling at Zero Temperature

    Institute of Scientific and Technical Information of China (English)

    JIANG Wei; ZHU Cheng-Bo; WANG Wei; ZHANG Fan

    2009-01-01

    Spin-wave theory is used to study magnetic properties of ferromagnetic double layers with a ferrimagnetic interlayer coupling at zero temperature.The spin-wave spectra and four sublattices magnetizations and internal energy are calculated by employing retarded Green function technique.The sublattice magnetizations at ground state are smaller than their classical values, owing to the zero-point quantum fluctuations of the spins.

  19. Effects of binders on the performance of electric double-layer capacitors of carbon nanotube electrodes

    Institute of Scientific and Technical Information of China (English)

    LI Chensha; WANG Dazhi; ZHANG Baoyou; WANG Xiaofeng; CAO Maosheng; LIANG Ji

    2005-01-01

    Polarizable electrodes of electric double layer capacitor (EDLCs) were made from carhon nanotubes. Effects of different binders, which are phenolic resin (PF) and polytetrafluoroethylene (PTFE), on the properties of polarizable electrodes are studied. Results indicate that the microstructure, pore size distribution and specific capacitance of the electrodes with PTFE binder are superior to those electrodes with PF binder after carbonization. The suitable binder (PTFE) for carbon nanotubes electrodes is proposed.

  20. Quantum Size Effects on Two Electrons and Two Holes in Double-Layer Quantum Dots

    Institute of Scientific and Technical Information of China (English)

    XIE Wen-Fang; ZHU Wu

    2002-01-01

    We propose a procedure to solve exactly the Schrodinger equation for a system of two electrons and two holes in a double-layer quantum dot by using the method of few-body physics. The features of the low-lying spectra have been deduced based on symmetry. The binding energies of the ground state are obtained as a function of the electron-to-hole mass ratio σ for a few values of the quantum dot size.

  1. Oxidation behavior of CNTs and the electric double layer capacitor made of the CNT electrodes

    Institute of Scientific and Technical Information of China (English)

    李辰砂; 王大志; 梁彤祥; 李贵涛; 王晓峰; 曹茂盛; 梁吉

    2003-01-01

    The effect of CO2 oxidized carbon nanotubes (CNTs) on the performance of electric double layer capacitors (EDLCs) was studied. CO2 oxidation increased the specific area and improved the dispersity of CNTs. Specific capacitance of the polarizable electrodes in EDLCs based on the oxidized CNTs were obviously improved and the maximum specific capacitance of 47 F/g was obtained. CO2 oxidizing CNTs is hence an effective way to improve the performances of EDLCs based on the CNT electrodes.

  2. Novel electric double-layer capacitor with a coaxial fiber structure.

    Science.gov (United States)

    Chen, Xuli; Qiu, Longbin; Ren, Jing; Guan, Guozhen; Lin, Huijuan; Zhang, Zhitao; Chen, Peining; Wang, Yonggang; Peng, Huisheng

    2013-11-26

    A coaxial electric double-layer capacitor fiber is developed from the aligned carbon nanotube fiber and sheet, which functions as two electrodes with a polymer gel sandwiched between them. The unique coaxial structure enables a rapid transportation of ions between the two electrodes with a high electrochemical performance. These energy storage fibers are also flexible and stretchable, and can be woven into and widely used for electronic textiles.

  3. The onset of double-diffusive convection in a nanofluid layer

    Energy Technology Data Exchange (ETDEWEB)

    Nield, D.A. [Department of Engineering Science, University of Auckland, Private Bag 92019, Auckland (New Zealand); Kuznetsov, A.V., E-mail: avkuznet@ncsu.edu [Department of Mechanical and Aerospace Engineering, North Carolina State University, Campus Box 7910, Raleigh, NC 27695-7910 (United States)

    2011-08-15

    The onset of double-diffusive convection in a horizontal layer of a nanofluid is studied analytically. The model used for the nanofluid incorporates the effects of Brownian motion and thermophoresis. In addition the thermal energy equations include regular diffusion and cross-diffusion terms. The stability boundaries for both non-oscillatory and oscillatory cases have been approximated by simple analytical expressions. Physical significance of the obtained results is discussed.

  4. Synthesis of ACECLOFENAC/HYDROXYPROPYL-β-CYCLODEXTRIN Intercalated Layered Double Hydroxides and Controlled Release Properties

    Science.gov (United States)

    Li, Shifeng; Shen, Yanming; Liu, Dongbin; Fan, Lihui; Wu, Keke; Xiao, Min

    2013-04-01

    Aceclofenac (AC)/hydroxypropyl-β-cyclodextrin (HP-β-CD) complex intercalated layered double hydroxides (LDHs) have been synthesized by reconstruction method. X-ray diffraction, Fourier transform infrared and thermal gravimetric analyses indicated a successful intercalation of AC/HP-β-CD complex into the LDHs gallery. The AC release properties were also studied in different pH values buffer solution. The results indicate that the AC/HP-β-CD intercalated LDH has a potential application in drug delivery agent.

  5. Preparation of Monodisperse Nanoparticle of Layered Double Hydroxides and Polyoxyethylene Sulfate

    Institute of Scientific and Technical Information of China (English)

    XU Huizhong; QIN Lianjie; ZHANG Hong; YANG Qinzheng; YANG Jing

    2005-01-01

    In order to obtain the bio-molecule/ LDHs nanocomposites having regular crystal structure,three nanocomposites of layered double hydroxides and polyoxyethylene sulfates were prepared by ion-exchange method. TEM analysis reveals that the monodisperse rigid .sphere of approximately 200 nm in diameter could be gotten when the intergallery anion was PEGS-400. Such monodisperse nanoparticle could be used as a promising precursor for preparing bio-molecule/LDHs nanocomposites.

  6. Study of organo-hybrid layered double hydroxides by medium and near infrared spectroscopy

    Science.gov (United States)

    Mora, Manuel; López, M. Isabel; Jiménez-Sanchidrián, César; Ruiz, J. Rafael

    2011-03-01

    An Mg/Al layered double hydroxide (LDH) containing carbonate ion in its interlayer region was examined by medium infrared (MIR) and near infrared reflectance spectroscopy (NIRS). The MIR and NIR spectroscopy techniques was also used to study two organo-hybrid LDHs containing interlayer dodecylbenzenesulphonate (DBS) and dodecylsulphate (DS) ions, respectively. The NIR spectra for the latter solids were found to exhibit the overtone and combination bands for the hydroxyl groups in addition to those typical bands of the organic host functions.

  7. Ion-acoustic solitons, double layers and rogue waves in plasma having superthermal electrons

    Science.gov (United States)

    Singh Saini, Nareshpal

    2016-07-01

    Most of the space and astrophysical plasmas contain different type of charged particles with non-Maxwellian velocity distributions (e.g., nonthermal, superthermal, Tsallis ). These distributions are commonly found in the auroral region of the Earth's magnetosphere, planetary magnetosphere, solar and stellar coronas, solar wind, etc. The observations from various satellite missions have confirmed the presence of superthermal particles in space and astrophysical environments. Over the last many years, there have been a much interest in studying the different kind of properties of the electrostatic nonlinear excitations (solitons, double layers, rogue waves etc.) in a multi-component plasmas in the presence of superthermal particles. It has been analyzed that superthermal distributions are more appropriate than Maxwellian distribution for the modeling of space data. It is interesting to study the dynamics of various kinds of solitary waves, Double layers, Shocks etc. in varieties of plasma systems containing different kind of species obeying Lorentzian (kappa-type)/Tsallis distribution. In this talk, I have focused on the study of large amplitude IA solitary structures (bipolar solitary structures, double layers etc.), modulational instability and rogue waves in multicomponent plasmas. The Sagdeev potential method has been employed to setup an energy balance equation, from which we have studied the characteristics of large amplitude solitary waves under the influence of superthermality of charged particles and other plasma parameters. The critical Mach number has been determined, above which solitary structures are observed and its variation with superthermality of electrons and other parameters has also been discussed. Double layers have also been discussed. Multiple scale reductive perturbation method has been employed to derive NLS equation. From the different kind of solutions of this equation, amplitude modulation of envelope solitons and rogue waves have been

  8. Magnetic behavior of Mg-Al-Zn-Fe mixed oxides from precursors layered double hydroxide

    Energy Technology Data Exchange (ETDEWEB)

    Oliva, M.I., E-mail: marcosivanoliva@gmail.com [Facultad de Matematica, Astronomia y Fisica, Universidad Nacional de Cordoba, M. Allende y H. de la Torre Ciudad Universitaria, 5000 Cordoba (Argentina); IFFAM AF (CONICET - FaMAF UNC), M. Allende y H. de la Torre Ciudad Universitaria, 5000 Cordoba (Argentina); Heredia, A. [CITeQ - Facultad R. Cordoba, Universidad Tecnologica Nacional Maestro Lopez esq. Cruz Roja Argentina, CP 5016 Cordoba (Argentina); Zandalazini, C.I. [Centro Laser de Ciencias Moleculares. INFIQC-FCQ-Grupo de Ciencia de Materiales-FaMAF-Universidad Nacional de Cordoba, Ciudad Universitaria, CP5000 Cordoba, Argentina CONICET (Argentina); Crivello, M. [CITeQ - Facultad R. Cordoba, Universidad Tecnologica Nacional Maestro Lopez esq. Cruz Roja Argentina, CP 5016 Cordoba (Argentina); Corchero, E. [Facultad de Matematica, Astronomia y Fisica, Universidad Nacional de Cordoba, M. Allende y H. de la Torre Ciudad Universitaria, 5000 Cordoba (Argentina)

    2012-08-15

    Mixed oxides of Mg-Al-Zn-Fe were obtained by calcination of layered double hydroxides (LDH) prepared by coprecipitation reaction with hydrothermal treatment. The structural characterization of precursors and oxides was carried out by X rays diffraction, showing increases of ZnO phase with the increase of the zinc content. Magnetic behavior was studied by vibrating sample magnetometer (VSM) and by a superconducting quantum interference device (SQUID) showing both paramagnetic and super paramagnetic behavior depending on both particles size and composition.

  9. Formating double layer mechanism by electric charged particle stream in plasma

    Science.gov (United States)

    Shan-jun, Ma; Qian-li, Yang; Xiao-qing, Li

    1998-08-01

    In this paper, two-fluid equations have been solved after having considered magnetic field generated by charged particle stream. Finally, the distribution of electric field Ez(z, r) and its growth rate γ in plasma have been obtained. From the expression of Ez(z, r) it can be known that the double layer has been formed. With the increase of disturbance γ will be larger, and finally this will result in the interruption of electric current and occurrence of burst.

  10. Study on the Manufacturability Evaluation Based on Double-layer Model of Manufacturing Resources

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Virtual organization is a new production patter and a principal part in advanced manufacturing systems such as agile manufacturing. Manufacturability evaluation is the necessary condition to form the virtual organization. A new manufacturability evaluation approach is described in this paper, which is carried out based on every process feature under the double-layer model of manufacturing resources proposed by authors. The manufacturing resources that build up the virtual organization are selected according to the results of manufacturability evaluation.

  11. Optimization of layered double hydroxide stability and adsorption capacity for anionic surfactants

    OpenAIRE

    2007-01-01

    Low cost adsorption technology offers high potential to clean up laundry rinsing water. From an earlier selection of adsorbents, layered double hydroxide (LDH) proved to be an interesting material for the removal of anionic surfactant, linear alkyl benzene sulfonate (LAS) which is the main contaminant in rinsing water. The main research question was to identify the effect of process parameters of the LDH synthesis on the stability of the LDH structure and the adsorption capacity of LAS. LDH w...

  12. Ionic Liquids as Electrolytes for Electrochemical Double-Layer Capacitors: Structures that Optimize Specific Energy.

    Science.gov (United States)

    Mousavi, Maral P S; Wilson, Benjamin E; Kashefolgheta, Sadra; Anderson, Evan L; He, Siyao; Bühlmann, Philippe; Stein, Andreas

    2016-02-10

    Key parameters that influence the specific energy of electrochemical double-layer capacitors (EDLCs) are the double-layer capacitance and the operating potential of the cell. The operating potential of the cell is generally limited by the electrochemical window of the electrolyte solution, that is, the range of applied voltages within which the electrolyte or solvent is not reduced or oxidized. Ionic liquids are of interest as electrolytes for EDLCs because they offer relatively wide potential windows. Here, we provide a systematic study of the influence of the physical properties of ionic liquid electrolytes on the electrochemical stability and electrochemical performance (double-layer capacitance, specific energy) of EDLCs that employ a mesoporous carbon model electrode with uniform, highly interconnected mesopores (3DOm carbon). Several ionic liquids with structurally diverse anions (tetrafluoroborate, trifluoromethanesulfonate, trifluoromethanesulfonimide) and cations (imidazolium, ammonium, pyridinium, piperidinium, and pyrrolidinium) were investigated. We show that the cation size has a significant effect on the electrolyte viscosity and conductivity, as well as the capacitance of EDLCs. Imidazolium- and pyridinium-based ionic liquids provide the highest cell capacitance, and ammonium-based ionic liquids offer potential windows much larger than imidazolium and pyridinium ionic liquids. Increasing the chain length of the alkyl substituents in 1-alkyl-3-methylimidazolium trifluoromethanesulfonimide does not widen the potential window of the ionic liquid. We identified the ionic liquids that maximize the specific energies of EDLCs through the combined effects of their potential windows and the double-layer capacitance. The highest specific energies are obtained with ionic liquid electrolytes that possess moderate electrochemical stability, small ionic volumes, low viscosity, and hence high conductivity, the best performing ionic liquid tested being 1-ethyl-3

  13. Insights into the Synthesis of Layered Double Hydroxide (LDH) Nanoparticles: Part 2. Formation Mechanisms of LDH

    OpenAIRE

    Sun, Xiaodi; Dey, Sandwip K.

    2015-01-01

    This study demonstrates the effect of (co)intercalated anion compositions on nanostructure evolution to understand the formation mechanisms of layered double hydroxide (LDH) nanoparticles following coprecipitation and hydrothermal treatments (HT). Initially, the room temperature coprecipitation resulted in amorphous primary nanoparticles that agglomerated at the edges due to low surface charge densities. The reversibility of such agglomeration was determined by the crystalline quality upon HT...

  14. Substituted Quaternary Ammonium Salts Improve Low-Temperature Performance of Double-Layer Capacitors

    Science.gov (United States)

    Brandon, Erik J.; Smart, Marshall C.; West, William C.

    2011-01-01

    Double-layer capacitors are unique energy storage devices, capable of supporting large current pulses as well as a very high number of charging and discharging cycles. The performance of doublelayer capacitors is highly dependent on the nature of the electrolyte system used. Many applications, including for electric and fuel cell vehicles, back-up diesel generators, wind generator pitch control back-up power systems, environmental and structural distributed sensors, and spacecraft avionics, can potentially benefit from the use of double-layer capacitors with lower equivalent series resistances (ESRs) over wider temperature limits. Higher ESRs result in decreased power output, which is a particular problem at lower temperatures. Commercially available cells are typically rated for operation down to only 40 C. Previous briefs [for example, Low Temperature Supercapacitors (NPO-44386), NASA Tech Briefs, Vol. 32, No. 7 (July 2008), p. 32, and Supercapacitor Electrolyte Solvents With Liquid Range Below 80 C (NPO-44855), NASA Tech Briefs, Vol. 34, No. 1 (January 2010), p. 44] discussed the use of electrolytes that employed low-melting-point co-solvents to depress the freezing point of traditional acetonitrile-based electrolytes. Using these modified electrolyte formulations can extend the low-temperature operational limit of double-layer capacitors beyond that of commercially available cells. This previous work has shown that although the measured capacitance is relatively insensitive to temperature, the ESR can rise rapidly at low temperatures, due to decreased electrolyte conductance within the pores of the high surface- area carbon electrodes. Most of these advanced electrolyte systems featured tetraethylammonium tetrafluoroborate (TEATFB) as the salt. More recent work at JPL indicates the use of the asymmetric quaternary ammonium salt triethylmethylammonium tetrafluoroborate (TEMATFB) or spiro-(l,l')-bipyrrolidium tetrafluoroborate (SBPBF4) in a 1:1 by volume solvent

  15. Dichotomy of the electronic structure and superconductivity between single-layer and double-layer FeSe/SrTiO3 films.

    Science.gov (United States)

    Liu, Xu; Liu, Defa; Zhang, Wenhao; He, Junfeng; Zhao, Lin; He, Shaolong; Mou, Daixiang; Li, Fangsen; Tang, Chenjia; Li, Zhi; Wang, Lili; Peng, Yingying; Liu, Yan; Chen, Chaoyu; Yu, Li; Liu, Guodong; Dong, Xiaoli; Zhang, Jun; Chen, Chuangtian; Xu, Zuyan; Chen, Xi; Ma, Xucun; Xue, Qikun; Zhou, X J

    2014-09-23

    The latest discovery of possible high-temperature superconductivity in the single-layer FeSe film grown on a SrTiO3 substrate has generated much attention. Initial work found that, while the single-layer FeSe/SrTiO3 film exhibits a clear signature of superconductivity, the double-layer film shows an insulating behaviour. Such a marked layer-dependent difference is surprising and the underlying origin remains unclear. Here we report a comparative angle-resolved photoemission study between the single-layer and double-layer FeSe/SrTiO3 films annealed in vacuum. We find that, different from the single-layer FeSe/SrTiO3 film, the double-layer FeSe/SrTiO3 film is hard to get doped and remains in the semiconducting/insulating state under an extensive annealing condition. Such a behaviour originates from the much reduced doping efficiency in the bottom FeSe layer of the double-layer FeSe/SrTiO3 film from the FeSe-SrTiO3 interface. These observations provide key insights in understanding the doping mechanism and the origin of superconductivity in the FeSe/SrTiO3 films.

  16. The electric double layer at a metal electrode in pure water

    Science.gov (United States)

    Brüesch, Peter; Christen, Thomas

    2004-03-01

    Pure water is a weak electrolyte that dissociates into hydronium ions and hydroxide ions. In contact with a charged electrode a double layer forms for which neither experimental nor theoretical studies exist, in contrast to electrolytes containing extrinsic ions like acids, bases, and solute salts. Starting from a self-consistent solution of the one-dimensional modified Poisson-Boltzmann equation, which takes into account activity coefficients of point-like ions, we explore the properties of the electric double layer by successive incorporation of various correction terms like finite ion size, polarization, image charge, and field dissociation. We also discuss the effect of the usual approximation of an average potential as required for the one-dimensional Poisson-Boltzmann equation, and conclude that the one-dimensional approximation underestimates the ion density. We calculate the electric potential, the ion distributions, the pH-values, the ion-size corrected activity coefficients, and the dissociation constants close to the electric double layer and compare the results for the various model corrections.

  17. Magnetohydrodynamic effects on a charged colloidal sphere with arbitrary double-layer thickness.

    Science.gov (United States)

    Hsieh, Tzu H; Keh, Huan J

    2010-10-01

    An analytical study is presented for the magnetohydrodynamic (MHD) effects on a translating and rotating colloidal sphere in an arbitrary electrolyte solution prescribed with a general flow field and a uniform magnetic field at a steady state. The electric double layer surrounding the charged particle may have an arbitrary thickness relative to the particle radius. Through the use of a simple perturbation method, the Stokes equations modified with an electric force term, including the Lorentz force contribution, are dealt by using a generalized reciprocal theorem. Using the equilibrium double-layer potential distribution from solving the linearized Poisson-Boltzmann equation, we obtain closed-form formulas for the translational and angular velocities of the spherical particle induced by the MHD effects to the leading order. It is found that the MHD effects on the particle movement associated with the translation and rotation of the particle and the ambient fluid are monotonically increasing functions of κa, where κ is the Debye screening parameter and a is the particle radius. Any pure rotational Stokes flow of the electrolyte solution in the presence of the magnetic field exerts no MHD effect on the particle directly in the case of a very thick double layer (κa→0). The MHD effect caused by the pure straining flow of the electrolyte solution can drive the particle to rotate, but it makes no contribution to the translation of the particle.

  18. Synthesis, characterization, and efficacy of antituberculosis isoniazid zinc aluminum-layered double hydroxide based nanocomposites.

    Science.gov (United States)

    Saifullah, Bullo; El Zowalaty, Mohamed Ezzat; Arulselvan, Palanisamy; Fakurazi, Sharida; Webster, Thomas J; Geilich, Benjamin Mahler; Hussein, Mohd Zobir

    2016-01-01

    The chemotherapy for tuberculosis (TB) is complicated by its long-term treatment, its frequent drug dosing, and the adverse effects of anti-TB drugs. In this study, we have developed two nanocomposites (A and B) by intercalating the anti-TB drug isoniazid (INH) into Zn/Al-layered double hydroxides. The average size of the nanocomposites was found to bê164 nm. The efficacy of the Zn/Al-layered double hydroxides intercalated INH against Mycobacterium tuberculosis was increased by approximately three times more than free INH. The nanocomposites were also found to be active against Gram-positive and -negative bacteria. Compared to the free INH, the nanodelivery formulation was determined to be three times more biocompatible with human normal lung fibroblast MRC-5 cells and 3T3 fibroblast cells at a very high concentration of 50 µg/mL for up to 72 hours. The in vitro release of INH from the Zn/Al-layered double hydroxides was found to be sustained in human body-simulated buffer solutions of pH 4.8 and 7.4. This research is a step forward in making the TB chemotherapy patient friendly.

  19. Tribological Properties of the Fe-Al-Cr Alloyed Layer by Double Glow Plasma Surface Metallurgy

    Science.gov (United States)

    Luo, Xixi; Yao, Zhengjun; Zhang, Pingze; Zhou, Keyin; Wang, Zhangzhong

    2016-09-01

    A Fe-Al-Cr alloyed layer was deposited onto the surface of Q235 low-carbon steel via double glow plasma surface metallurgy (DGPSM) to improve the steel's wear resistance. After the DGPSM treatment, the Fe-Al-Cr alloyed layer grown on the Q235 low-carbon steel was homogeneous and compact and had a thickness of 25 µm. The layer was found to be metallurgically adhered to the substrate. The frictional coefficient and specific wear rate of the sample with a Fe-Al-Cr alloyed layer (treated sample) were both lower than those of the bare substrate (untreated sample) at the measured temperatures (25, 250 and 450 °C). The results indicated that the substrate and the alloyed layer suffered oxidative wear and abrasive wear, respectively, and that the treated samples exhibited much better tribological properties than did the substrate. The formation of Fe2AlCr, Fe3Al(Cr), FeAl(Cr), Fe(Cr) sosoloid and Cr23C6 phases in the alloyed layer dramatically enhanced the wear resistance of the treated sample. In addition, the alloyed layer's oxidation film exhibited a self-healing capacity with lubrication action that also contributed to the improvement of the wear resistance at high temperature. In particular, at 450 °C, the specific wear rate of treated sample was 2.524 × 10-4 mm3/N m, which was only 45.2% of the untreated sample.

  20. Boosted output performance of triboelectric nanogenerator via electric double layer effect

    Science.gov (United States)

    Chun, Jinsung; Ye, Byeong Uk; Lee, Jae Won; Choi, Dukhyun; Kang, Chong-Yun; Kim, Sang-Woo; Wang, Zhong Lin; Baik, Jeong Min

    2016-10-01

    For existing triboelectric nanogenerators (TENGs), it is important to explore unique methods to further enhance the output power under realistic environments to speed up their commercialization. We report here a practical TENG composed of three layers, in which the key layer, an electric double layer, is inserted between a top layer, made of Al/polydimethylsiloxane, and a bottom layer, made of Al. The efficient charge separation in the middle layer, based on Volta's electrophorus, results from sequential contact configuration of the TENG and direct electrical connection of the middle layer to the earth. A sustainable and enhanced output performance of 1.22 mA and 46.8 mW cm-2 under low frequency of 3 Hz is produced, giving over 16-fold enhancement in output power and corresponding to energy conversion efficiency of 22.4%. Finally, a portable power-supplying system, which provides enough d.c. power for charging a smart watch or phone battery, is also successfully developed.

  1. Thickness dependence of the levitation performance of double-layer high-temperature superconductor bulks above a magnetic rail

    Energy Technology Data Exchange (ETDEWEB)

    Sun, R.X.; Zheng, J.; Liao, X.L.; Che, T.; Gou, Y.F.; He, D.B.; Deng, Z.G., E-mail: zgdeng@gmail.com

    2014-10-15

    Highlights: • Thickness optimization of double-layer bulk HTSC arrangement is studied. • The new bulk HTSC arrangement makes better use of the flux distribution of the magnetic rails. • Levitation performance can be enhanced with the optimization. • The optimization can meet large levitation force requirements for HTS Maglev system. - Abstract: A double-layer high-temperature superconductor (HTSC) arrangement was proposed and proved to be able to bring improvements to both levitation force and guidance force compared with present single-layer HTSC arrangement. To fully exploit the applied magnetic field by a magnetic rail, the thickness dependence of a double-layer HTSC arrangement on the levitation performance was further investigated in the paper. In this study, the lower-layer bulk was polished step by step to different thicknesses, and the upper-layer bulk with constant thickness was directly superimposed on the lower-layer one. The levitation force and the force relaxation of the double-layer HTSC arrangement were measured above a Halbach magnetic rail. Experimental result shows that a bigger levitation force and a less levitation force decay could be achieved by optimizing the thickness of the lower-layer bulk HTSC. This thickness optimization method could be applied together with former reported double-layer HTSC arrangement method with aligned growth sector boundaries pattern. This series of study on the optimized combination method do bring a significant improvement on the levitation performance of present HTS maglev systems.

  2. Double-layer indium doped zinc oxide for silicon thin-film solar cell prepared by ultrasonic spray pyrolysis

    Institute of Scientific and Technical Information of China (English)

    Jiao Bao-Chen; Zhang Xiao-Dan; Wei Chang-Chun; Sun Jian; Ni Jian; Zhao Ying

    2011-01-01

    Indium doped zinc oxide (ZnO:In) thin films were prepared by ultrasonic spray pyrolysis on corning eagle 2000 glass substrate. 1 and 2 at.% indium doped single-layer ZnO:In thin films with different amounts of acetic acid added in the initial solution were fabricated. The 1 at.% indium doped single-layers have triangle grains. The 2 at.% indium doped single-layer with 0.18 acetic acid adding has the resistivity of 6.82 × 10-3 Ω· cm and particle grains. The double-layers structure is designed to fabricate the ZnO:In thin film with low resistivity (2.58×10-3 Ω· cm) and good surface morphology. It is found that the surface morphology of the double-layer ZnO:In film strongly depends on the substrate-layer, and the second-layer plays a large part in the resistivity of the double-layer ZnO:In thin film. Both total and direct transmittances of the double-layer ZnO:In film are above 80% in the visible light region. Single junction a-Si:H solar cell based on the double-layer ZnO:In as front electrode is also investigated.

  3. Improved Performance of Organic Thin Film Transistor with an Inorganic Oxide/Polymer Double-Layer Insulator

    Institute of Scientific and Technical Information of China (English)

    ZHAO Yi-Hua; DONG Gui-Fang; WANG Li-Duo; QIU Yong

    2007-01-01

    We employ the Ta2O5/PVP (poly-4-vinylphenol) double-layer gate insulator to improve the performance of pentacene thin-film transistors. It is found that the double-layer insulator has low leakage current, smooth surface and considerably high capacitance. Compared to Ta2O5 insulator layers, the device with the Ta2O5/PVP double-layer insulator exhibits an enhancement of the Reid-effect mobility from 0.21 to 0.54 cm2 /Vs, and the decreasing threshold voltage from 4.38V to -2.5 V. The results suggest that the Ta2O5/PVP double-layer insulator is a potential gate insulator for fabricating OTFTs with good electrical performance.

  4. 双(羟基)金属复合氧化物的表面改性%Surface Modification of Layered Double Hydroxide

    Institute of Scientific and Technical Information of China (English)

    冯春瑶; 矫庆泽; 李蕾; 张春英; 段雪

    2001-01-01

    Mg/Al layered double hydroxide(LDH) was treated with stearic acid by a wet method. The modified double hydroxide showed good dispersion and floatation property with their layer structure being remained almost unchanged.

  5. Unstacked double-layer templated graphene for high-rate lithium-sulphur batteries

    Science.gov (United States)

    Zhao, Meng-Qiang; Zhang, Qiang; Huang, Jia-Qi; Tian, Gui-Li; Nie, Jing-Qi; Peng, Hong-Jie; Wei, Fei

    2014-03-01

    Preventing the stacking of graphene is essential to exploiting its full potential in energy-storage applications. The introduction of spacers into graphene layers always results in a change in the intrinsic properties of graphene and/or induces complexity at the interfaces. Here we show the synthesis of an intrinsically unstacked double-layer templated graphene via template-directed chemical vapour deposition. The as-obtained graphene is composed of two unstacked graphene layers separated by a large amount of mesosized protuberances and can be used for high-power lithium-sulphur batteries with excellent high-rate performance. Even after 1,000 cycles, high reversible capacities of ca. 530 mA h g-1 and 380 mA h g-1 are retained at 5 C and 10 C, respectively. This type of double-layer graphene is expected to be an important platform that will enable the investigation of stabilized three-dimensional topological porous systems and demonstrate the potential of unstacked graphene materials for advanced energy storage, environmental protection, nanocomposite and healthcare applications.

  6. Improved Mechanical Compatibility and Cytocompatibility of Ta/Ti Double-Layered Composite Coating

    Science.gov (United States)

    Ding, Ding; Xie, Youtao; Li, Kai; Huang, Liping; Zheng, Xuebin

    2017-07-01

    In order to improve the mechanical compatibility and cytocompatibility of titanium implants, a composite coating with double layers composed of tantalum and titanium was designed and prepared using plasma spraying technology. In the composite coating, the upper tantalum layer provides a good biocompatibility, and the sublayer of titanium with a porous structure ensures the low elastic modulus. Results show that the fabricated composite coating exhibits a relatively low elastic modulus of 26.7 GPa, which is close to the elastic modulus of human cortical bone. In vitro cytocompatibility evaluation of the composite coating shows that the human bone marrow stromal cells exhibit enhanced adhesion and spreading performance on the double-layered composite coating in comparison with the single-layered titanium coating. In order to eliminate the misgivings of chemical stability of the composite coating in clinical application, electrochemical corrosion of the coating was examined. The results obtained revealed a very weak galvanic corrosion between the tantalum and titanium in the composite coating, which would ensure the safety of the coating in vivo.

  7. A chiroptical switch based on DNA/layered double hydroxide ultrathin films.

    Science.gov (United States)

    Shi, Wenying; Jia, Yankun; Xu, Simin; Li, Zhixiong; Fu, Yi; Wei, Min; Shi, Shuxian

    2014-11-04

    A highly oriented film was fabricated by layer-by-layer self-assembly of DNA and MgAl-layered double hydroxide nanosheets, and its application in chiroptical switch was demonstrated via intercalation and deintercalation of an achiral molecule into the DNA cavity. DNA molecules are prone to forming an ordered and dispersive state in the interlayer region of rigid layered double hydroxide (LDH) nanosheets as confirmed by scanning electron microscopy and atomic force microscopy. The induced chiroptical ultrathin film (UTF) is achieved via the intercalation of an achiral chromophore [5,10,15,20-tetrakis(4-N-methylpyridyl)porphine tetra(p-toluenesulfonate) (TMPyP)] into the spiral cavity of DNA stabilized in the LDH matrix [denoted as TMPyP-(DNA/LDH)20]. Fluorescence and circular dichroism spectroscopy are utilized to testify the intercalation of TMPyP into (DNA/LDH)20 UTF that involves two steps: the electrostatic binding of TMPyP onto the surface of (DNA/LDH)20 followed by intercalation into base pairs of DNA. In addition, the TMPyP-(DNA/LDH)20 UTF exhibits good reversibility and repeatability in induced optical chirality, based on the intercalation and deintercalation of TMPyP by alternate exposure to HCl and NH3/H2O vapor, which can be potentially used as a chiroptical switch in data storage.

  8. Improved Mechanical Compatibility and Cytocompatibility of Ta/Ti Double-Layered Composite Coating

    Science.gov (United States)

    Ding, Ding; Xie, Youtao; Li, Kai; Huang, Liping; Zheng, Xuebin

    2017-08-01

    In order to improve the mechanical compatibility and cytocompatibility of titanium implants, a composite coating with double layers composed of tantalum and titanium was designed and prepared using plasma spraying technology. In the composite coating, the upper tantalum layer provides a good biocompatibility, and the sublayer of titanium with a porous structure ensures the low elastic modulus. Results show that the fabricated composite coating exhibits a relatively low elastic modulus of 26.7 GPa, which is close to the elastic modulus of human cortical bone. In vitro cytocompatibility evaluation of the composite coating shows that the human bone marrow stromal cells exhibit enhanced adhesion and spreading performance on the double-layered composite coating in comparison with the single-layered titanium coating. In order to eliminate the misgivings of chemical stability of the composite coating in clinical application, electrochemical corrosion of the coating was examined. The results obtained revealed a very weak galvanic corrosion between the tantalum and titanium in the composite coating, which would ensure the safety of the coating in vivo.

  9. Nitrogen-enriched, double-shelled carbon/layered double hydroxide hollow microspheres for excellent electrochemical performance

    Science.gov (United States)

    Xu, Jie; He, Fei; Gai, Shili; Zhang, Shenghuan; Li, Lei; Yang, Piaoping

    2014-08-01

    A unique, double-shelled, hollow, carbon-based composite with enriched nitrogen has been prepared through a facile and versatile synthetic strategy. The hierarchical composite employs the nitrogen-enriched carbon hollow sphere as an interior shell and intercrossed Ni/Al layered double hydroxide (LDH) nanosheets as an exterior shell. The obtained N-C@LDH hollow microspheres (HMS) have high nitrogen enrichment, large specific surface area (337 m2 g-1), and uniform and open mesoporous structure. Taking advantage of these characteristics, the composite exhibits obviously superior capacitive behavior, including high specific capacitance, excellent rate capability and good cycling stability, compared with nitrogen-free carbon@LDH composite and hollow LDH without carbon shell. The composite displays high specific capacitance of 1711.51 F g-1 at a current density of 1 A g-1. In particular, the high specific capacitance can be kept to 997.3 F g-1 at a high current density of 10 A g-1, which still retains 94.97% of the initial specific capacitance after 500 cycles at this high current density. This N-enriched, hollow carbon/LDH composite can be expected to be a promising electrode material for electrochemical capacitors due to its high electrochemical performance.A unique, double-shelled, hollow, carbon-based composite with enriched nitrogen has been prepared through a facile and versatile synthetic strategy. The hierarchical composite employs the nitrogen-enriched carbon hollow sphere as an interior shell and intercrossed Ni/Al layered double hydroxide (LDH) nanosheets as an exterior shell. The obtained N-C@LDH hollow microspheres (HMS) have high nitrogen enrichment, large specific surface area (337 m2 g-1), and uniform and open mesoporous structure. Taking advantage of these characteristics, the composite exhibits obviously superior capacitive behavior, including high specific capacitance, excellent rate capability and good cycling stability, compared with nitrogen

  10. A double-layer based model of ion confinement in electron cyclotron resonance ion source

    Energy Technology Data Exchange (ETDEWEB)

    Mascali, D., E-mail: davidmascali@lns.infn.it; Neri, L.; Celona, L.; Castro, G.; Gammino, S.; Ciavola, G. [Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali del Sud, via S. Sofia 62, 95123 Catania (Italy); Torrisi, G. [Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali del Sud, via S. Sofia 62, 95123 Catania (Italy); Università Mediterranea di Reggio Calabria, Dipartimento di Ingegneria dell’Informazione, delle Infrastrutture e dell’Energia Sostenibile, Via Graziella, I-89100 Reggio Calabria (Italy); Sorbello, G. [Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali del Sud, via S. Sofia 62, 95123 Catania (Italy); Università degli Studi di Catania, Dipartimento di Ingegneria Elettrica Elettronica ed Informatica, Viale Andrea Doria 6, 95125 Catania (Italy)

    2014-02-15

    The paper proposes a new model of ion confinement in ECRIS, which can be easily generalized to any magnetic configuration characterized by closed magnetic surfaces. Traditionally, ion confinement in B-min configurations is ascribed to a negative potential dip due to superhot electrons, adiabatically confined by the magneto-static field. However, kinetic simulations including RF heating affected by cavity modes structures indicate that high energy electrons populate just a thin slab overlapping the ECR layer, while their density drops down of more than one order of magnitude outside. Ions, instead, diffuse across the electron layer due to their high collisionality. This is the proper physical condition to establish a double-layer (DL) configuration which self-consistently originates a potential barrier; this “barrier” confines the ions inside the plasma core surrounded by the ECR surface. The paper will describe a simplified ion confinement model based on plasma density non-homogeneity and DL formation.

  11. Efficient InGaP/GaAs DJ solar cell with double back surface field layer

    Directory of Open Access Journals (Sweden)

    G.P. Mishra

    2015-09-01

    Full Text Available An effective and optimised BSF layer is an important layer in both single junction and multijunction solar cells. In this work the use of the double layer BSF for top cell with their varied thicknesses is investigated on GaInP/GaAs DJ solar cell using the computational numerical modelling TCAD tool Silvaco ATLAS. The detail photo-generation rates are determined. The major modelling stages are described and the simulation results are validated with published experimental data in order to describe the accuracy of our results produced. For this optimized cell structure, the maximum Jsc = 17.33 mA/cm2, Voc = 2.66 V, and fill factor (FF = 88.67% are obtained under AM1.5G illumination, exhibiting a maximum conversion efficiency of 34.52% (1 sun and 39.15% (1000 suns.

  12. Zn-Al LAYERED DOUBLE HYDROXIDE PILLARED BY DIFFERENT DICARBOXYLATE ANIONS

    Directory of Open Access Journals (Sweden)

    S. Gago

    2004-12-01

    Full Text Available Zn-Al layered double hydroxides (LDHs intercalated by terephthalate (TPH and biphenyl-4,4'-dicarboxylate (BPH anions have been synthesized by direct co-precipitation from aqueous solution. The Zn/Al ratio in the final materials was 1.8. The products were characterized by powder X-ray diffraction, thermogravimetric analysis, FTIR and FT Raman spectroscopy, and MAS NMR spectroscopy. The basal spacing for the TPH-LDH intercalate was 14.62 Å, indicating that the guest anions stack to form a monolayer with the aromatic rings perpendicular to the host layers. For the LDH intercalate containing BPH anions, a basal spacing of at least 19.2 Å would be expected if the anions adopted an arrangement similar to that for the TPH anions. The observed spacing was 18.24 Å, suggesting that the anions are tilted slightly with respect to the host layers.

  13. Double-Layer Magnetic Nanoparticle-Embedded Silica Particles for Efficient Bio-Separation.

    Directory of Open Access Journals (Sweden)

    San Kyeong

    Full Text Available Superparamagnetic Fe3O4 nanoparticles (NPs based nanomaterials have been exploited in various biotechnology fields including biomolecule separation. However, slow accumulation of Fe3O4 NPs by magnets may limit broad applications of Fe3O4 NP-based nanomaterials. In this study, we report fabrication of Fe3O4 NPs double-layered silica nanoparticles (DL MNPs with a silica core and highly packed Fe3O4 NPs layers. The DL MNPs had a superparamagnetic property and efficient accumulation kinetics under an external magnetic field. Moreover, the magnetic field-exposed DL MNPs show quantitative accumulation, whereas Fe3O4 NPs single-layered silica nanoparticles (SL MNPs and silica-coated Fe3O4 NPs produced a saturated plateau under full recovery of the NPs. DL MNPs are promising nanomaterials with great potential to separate and analyze biomolecules.

  14. Double plate system with a discontinuity in the elastic bonding layer

    Institute of Scientific and Technical Information of China (English)

    Katica (Stevanovi(c)) Hedrih

    2007-01-01

    The double plate system with a discontinuity in the elastic bonding layer of Winker type is studied in this paper. When the discontinuity is small, it can be taken as an interface crack between the bi-materials or two bodies (plates or beams). By comparison between the number of multifrequencies of analytical solutions of the double plate system free transversal vibrations for the case when the system is with and without discontinuity in elastic layer we obtain a theory for experimental vibration method for identification of the presence of an interface crack in the double plate system. The analytical analysis of free transversal vibrations of an elastically connected double plate systems with discontinuity in the elastic layer of Winkler type is presented. The analytical solutions of the coupled partial differential equations for dynamical free and forced vibration processes are obtained by using method of Bernoulli's particular integral and Lagrange's method of variation constants. It is shown that one mode vibration corresponds an infinite or finite multi-frequency regime for free and forced vibrations induced by initial conditions and onefrequency or corresponding number of multi-frequency regime depending on external excitations. It is shown for every shape of vibrations. The analytical solutions show that the discontinuity affects the appearance of multi-frequency regime of time function corresponding to one eigen amplitude function of one mode, and also that time functions of different vibration basic modes are coupled. From final expression we can separate the new generalized eigen amplitude functions with corresponding time eigen functions of one frequency and multifrequency regime of vibrations.

  15. Thermal shock behavior of toughened gadolinium zirconate/YSZ double-ceramic-layered thermal barrier coating

    Energy Technology Data Exchange (ETDEWEB)

    Zhong, Xinghua, E-mail: xhzhong@mail.sic.ac.cn; Zhao, Huayu; Zhou, Xiaming; Liu, Chenguang; Wang, Liang; Shao, Fang; Yang, Kai; Tao, Shunyan; Ding, Chuanxian

    2014-04-01

    Highlights: • Gd{sub 2}Zr{sub 2}O{sub 7}/YSZ DCL thermal barrier coating was designed and fabricated. • The Gd{sub 2}Zr{sub 2}O{sub 7} top ceramic layer was toughened by addition of nanostructured 3YSZ. • Remarkable improvement in thermal shock resistance of the DCL coating was achieved. - Abstract: Double-ceramic-layered (DCL) thermal barrier coating system comprising of toughened Gadolinium zirconate (Gd{sub 2}Zr{sub 2}O{sub 7}, GZ) as the top ceramic layer and 4.5 mol% Y{sub 2}O{sub 3} partially-stabilized ZrO{sub 2} (4.5YSZ) as the bottom ceramic layer was fabricated by plasma spraying and thermal shock behavior of the DCL coating was investigated. The GZ top ceramic layer was toughened by addition of nanostructured 3 mol% Y{sub 2}O{sub 3} partially-stabilized ZrO{sub 2} (3YSZ) to improve fracture toughness of the matrix. The thermal shock resistance of the DCL coating was enhanced significantly compared to that of single-ceramic-layered (SCL) GZ-3YSZ composite coating, which is believed to be primarily attributed to the two factors: (i) the increase in fracture toughness of the top ceramic layer by incorporating nanostructured YSZ particles and (ii) the improvement in strain tolerance through the utilization of 4.5YSZ as the bottom ceramic layer. In addition, the failure mechanisms are mainly attributed to the still low fracture toughness of the top ceramic layer and oxidation of the bond-coat.

  16. Towards understanding the structure and capacitance of electrical double layer in ionic liquids

    Energy Technology Data Exchange (ETDEWEB)

    Fedorov, Maxim V. [Max Planck Institute for Mathematics in the Sciences, D 04103 Leipzig (Germany); Unilever Centre for Molecular Science Informatics, Department of Chemistry, University of Cambridge, Lensfield Road, Cambridge CB2 1EW (United Kingdom); Kornyshev, Alexei A. [Department of Chemistry, Faculty of Natural Sciences, Imperial College London, SW7 2AZ London (United Kingdom)

    2008-10-01

    In order to understand basic principles of the double layer formation in room temperature ionic liquids, we have performed Molecular Dynamic simulations for a simplified system: dense assembly of charged Lennard-Jones spheres between charged walls. For simplicity, in this first investigation we have considered the cations and anions of the same size. We have calculated the corresponding values of the double layer capacitance as a function of the electrode potential and compared the results with existing theories. We have found that the capacitance curve does not follow the U-shape of the Gouy-Chapman theory, but has a bell-shape in agreement with the mean-field theory that takes into account the effect of limited maximum packing of ions. The wings of capacitance decrease inversely proportional to the square root of the electrode potential, as prescribed by the mean-field theory and the charge conservation law at large electrode polarizations. We have found, however, that the mean-field theory does not quantitatively reproduce the simulation results at small electrode potentials, having detected their remarkable overscreening effects (ionic correlations). The plots for the distributions of ions near the electrode at different electrode charges show that for the considered system, unlike it is often assumed, the double layer is not one layer thick. The overscreening effects, dominating near the potential of zero charge (p.z.c.), are suppressed by the high electrode polarizations, following the onset of the so-called 'lattice saturation effect'. The maximum of the capacitance coincides with the p.z.c., but it is true only for this 'symmetric' system. If sizes of cations and anions are different the maximum will be shifted away from the p.z.c., and generally the shape of the capacitance curve could be more complicated. (author)

  17. Surface plasmon dispersion engineering via double-metallic AU/AG layers for nitride light-emitting diodes

    Science.gov (United States)

    Tansu, Nelson; Zhao, Hongping; Zhang, Jing; Liu, Guangyu

    2014-04-01

    A double-metallic deposition process is used whereby adjacent layers of different metals are deposited on a substrate. The surface plasmon frequency of a base layer of a first metal is tuned by the surface plasmon frequency of a second layer of a second metal formed thereon. The amount of tuning is dependent upon the thickness of the metallic layers, and thus tuning can be achieved by varying the thicknesses of one or both of the metallic layers. In a preferred embodiment directed to enhanced LED technology in the green spectrum regime, a double-metallic Au/Ag layer comprising a base layer of gold (Au) followed by a second layer of silver (Ag) formed thereon is deposited on top of InGaN/GaN quantum wells (QWs) on a sapphire/GaN substrate.

  18. On the Acousto-Elastic Behaviour of Double-Wall Panels with a Viscothermal Air Layer

    Science.gov (United States)

    BASTEN, T. G. H.; VAN DER HOOGT, P. J. M.; SPIERING, R. M. E. J.; TIJDEMAN, H.

    2001-06-01

    In this paper, an analytical two-dimensional model is presented for the acousto-elastic behaviour of double-wall panels with a thin viscothermal air layer. The model for the air is based on the low reduced frequency solution as introduced by Beltman (1998 Ph.D. Thesis, University of Twente; 1999 Journal of Sound and Vibration227, (Part I), 555-586;227 (Part II), 587-609; Beltman et al., 1997 Journal of Sound and Vibration206 , 217-241; 1998 Journal of Sound and Vibration216, 159-185) [1-5] and includes, apart from inertia and compressibility, the effects of viscosity and thermal conductivity. With the analytical model eigenfrequencies were determined and response and transmission calculations were performed. It is shown that high damping coefficients for double-wall panels can be obtained by using the viscous characteristics of the fluid layer. The model makes it possible to conduct parameter analyses very easily and efficiently, which is important for design studies. Furthermore, the model gives exact results for both the vibrational behaviour and the sound transmission characteristics of double-wall panels which can be used to validate numerical codes.

  19. Using copper substrate to enhance electron field emission properties of carbon nanotube/diamond double-layered structure

    Science.gov (United States)

    Yang, Lezhi; Sujith Kumar, C. S.; Li, Yuan-shi; Niakan, Hamid; Zhang, Chunzi; Hirose, Akira; Aravind, Suresh; Yang, Qiaoqin

    2015-01-01

    Vertically aligned carbon nanotube (CNT)/diamond double-layered structure was synthesized on copper (Cu) substrate by hot-filament chemical vapor deposition. The structure was characterized by scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. The results show that the diamond layer has good adhesion to the Cu substrate and the CNTs have direct contact with the diamond layer. Field electron emission measurement shows that the double-layered structure on copper has very good emission stability and a much lower turn-on field than that on silicon (Si).

  20. Synthesis, characterization, and antimicrobial properties of novel double layer nanocomposite electrospun fibers for wound dressing applications

    Science.gov (United States)

    Hassiba, Alaa J; El Zowalaty, Mohamed E; Webster, Thomas J; Abdullah, Aboubakr M; Nasrallah, Gheyath K; Khalil, Khalil Abdelrazek; Luyt, Adriaan S; Elzatahry, Ahmed A

    2017-01-01

    Herein, novel hybrid nanomaterials were developed for wound dressing applications with antimicrobial properties. Electrospinning was used to fabricate a double layer nanocomposite nanofibrous mat consisting of an upper layer of poly(vinyl alcohol) and chitosan loaded with silver nanoparticles (AgNPs) and a lower layer of polyethylene oxide (PEO) or polyvinylpyrrolidone (PVP) nanofibers loaded with chlorhexidine (as an antiseptic). The top layer containing AgNPs, whose purpose was to protect the wound site against environmental germ invasion, was prepared by reducing silver nitrate to its nanoparticulate form through interaction with chitosan. The lower layer, which would be in direct contact with the injured site, contained the antibiotic drug needed to avoid wound infections which would otherwise interfere with the healing process. Initially, the upper layer was electrospun, followed sequentially by electrospinning the second layer, creating a bilayer nanofibrous mat. The morphology of the nanofibrous mats was studied by scanning electron microscopy and transmission electron microscopy, showing successful nanofiber production. X-ray diffraction confirmed the reduction of silver nitrate to AgNPs. Fourier transform infrared spectroscopy showed a successful incorporation of the material used in the produced nanofibrous mats. Thermal studies carried out by thermogravimetric analysis indicated that the PVP–drug-loaded layer had the highest thermal stability in comparison to other fabricated nanofibrous mats. Antimicrobial activities of the as-synthesized nanofibrous mats against Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Candida albicans were determined using disk diffusion method. The results indicated that the PEO–drug-loaded mat had the highest antibacterial activity, warranting further attention for numerous wound-healing applications. PMID:28356737

  1. Synthesis, characterization, and antimicrobial properties of novel double layer nanocomposite electrospun fibers for wound dressing applications.

    Science.gov (United States)

    Hassiba, Alaa J; El Zowalaty, Mohamed E; Webster, Thomas J; Abdullah, Aboubakr M; Nasrallah, Gheyath K; Khalil, Khalil Abdelrazek; Luyt, Adriaan S; Elzatahry, Ahmed A

    2017-01-01

    Herein, novel hybrid nanomaterials were developed for wound dressing applications with antimicrobial properties. Electrospinning was used to fabricate a double layer nanocomposite nanofibrous mat consisting of an upper layer of poly(vinyl alcohol) and chitosan loaded with silver nanoparticles (AgNPs) and a lower layer of polyethylene oxide (PEO) or polyvinylpyrrolidone (PVP) nanofibers loaded with chlorhexidine (as an antiseptic). The top layer containing AgNPs, whose purpose was to protect the wound site against environmental germ invasion, was prepared by reducing silver nitrate to its nanoparticulate form through interaction with chitosan. The lower layer, which would be in direct contact with the injured site, contained the antibiotic drug needed to avoid wound infections which would otherwise interfere with the healing process. Initially, the upper layer was electrospun, followed sequentially by electrospinning the second layer, creating a bilayer nanofibrous mat. The morphology of the nanofibrous mats was studied by scanning electron microscopy and transmission electron microscopy, showing successful nanofiber production. X-ray diffraction confirmed the reduction of silver nitrate to AgNPs. Fourier transform infrared spectroscopy showed a successful incorporation of the material used in the produced nanofibrous mats. Thermal studies carried out by thermogravimetric analysis indicated that the PVP-drug-loaded layer had the highest thermal stability in comparison to other fabricated nanofibrous mats. Antimicrobial activities of the as-synthesized nanofibrous mats against Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, and Candida albicans were determined using disk diffusion method. The results indicated that the PEO-drug-loaded mat had the highest antibacterial activity, warranting further attention for numerous wound-healing applications.

  2. Corrosion Resistance of the Superhydrophobic Mg(OH)2/Mg-Al Layered Double Hydroxide Coatings on Magnesium Alloys

    National Research Council Canada - National Science Library

    Zhang, Fen; Zhang, Changlei; Zeng, Rongchang; Song, Liang; Guo, Lian; Huang, Xiaowen

    2016-01-01

      Coatings of the Mg(OH)2/Mg-Al layered double hydroxide (LDH) composite were formed by a combined co-precipitation method and hydrothermal process on the AZ31 alloy substrate in alkaline condition...

  3. Determination of diffuse double layer protonation constants for hydrous ferric oxide (HFO): supporting evidence for the Dzombak and Morel compilation

    CSIR Research Space (South Africa)

    Pretorius, PJ

    1998-01-01

    Full Text Available The acid-base properties of hydrous ferric oxide were studied by glass electrode potentiometry. From the potentiometric data, surface protonation constants were derived according to the Diffuse Double Layer convention. Chemical equilibrium modelling...

  4. Large amplitude ion-acoustic rarefactive and compressive solitons and double layers in a dusty plasma with finite ion temperature

    Science.gov (United States)

    Jain, S. L.; Tiwari, R. S.; Mishra, M. K.

    2015-05-01

    Large amplitude ion-acoustic solitons and double layers are studied using Sagdeev's pseudo potential technique in a collisionless unmagnetized plasma consisting of hot and cold Maxwellian electrons, warm adiabatic ions, and heavily charged massive dust grains. It is found that for the selected set of plasma parameters, the system can support both solitons and double layers in the presence of negative as well as positive dust in the plasma. Further we have also investigated the ranges of parameters for simultaneous existence of both rarefactive and compressive supersonic solitons. The effects of dust concentration and ion temperature on the amplitude and Mach number of the double layer have also been studied. Our findings may be helpful in understanding the formation of non-linear structures, specially the solitons and double layers in space plasma, such as: in interstellar clouds, circumstellar clouds, planetary rings, comets, cometary tails, asteroid zones, auroral plasma, magnetospheric plasma, pulsars, and other astronomical environments and laboratory plasmas.

  5. Highly Durable Direct Methanol Fuel Cell with Double-Layered Catalyst Cathode

    Directory of Open Access Journals (Sweden)

    Jing Liu

    2015-01-01

    Full Text Available Polymer electrolyte membrane (PEM is one of the key components in direct methanol fuel cells. However, the PEM usually gets attacked by reactive oxygen species during the operation period, resulting in the loss of membrane integrity and formation of defects. Herein, a double-layered catalyst cathode electrode consisting of Pt/CeO2-C as inner catalyst and Pt/C as outer catalyst is fabricated to extend the lifetime and minimize the performance loss of DMFC. Although the maximum power density of membrane electrode assembly (MEA with catalyst cathode is slightly lower than that of the traditional one, its durability is significantly improved. No obvious degradation is evident in the MEA with double-layered catalyst cathode within durability testing. These results indicated that Pt/CeO2-C as inner cathode catalyst layer greatly improved the stability of MEA. The significant reason for the improved stability of MEA is the ability of CeO2 to act as free-radical scavengers.

  6. Heat transfer performance of a novel double-layer mini-channel heat sink

    Science.gov (United States)

    Tang, Biao; Zhou, Rui; Bai, Pengfei; Fu, Ting; Lu, Longsheng; Zhou, Guofu

    2017-03-01

    High pressure drop and significant non-uniformity in temperature distribution along the streamwise direction are still challenges to the design of mini-channel heat sink. High density mini-channel arrays with high liquid-wall contact area are usually pursued in a conventional single-layer design of heat sink, which also inevitably brings high pressure drop. A novel double-layer structured heat sink is proposed in this paper. Four heat sinks with various designs in mini-channel density and flow direction were fabricated and studied experimentally on the heat transfer performance. The single factor of heat load does not show obvious effect on the overall thermal resistance of the heat sinks. On the other hand, slight decrease in thermal resistance was found with the increase in heat load at high flow rates. Moreover, a computational fluid dynamics modeling work was conducted. The results indicate that the parallel cross-flow field regulated by the double-layer structure enhances the heat exchange in both horizontal and vertical directions and consequently gives an uniform temperature distribution and high heat transfer efficiency.

  7. Analytical model of LDMOS with a double step buried oxide layer

    Science.gov (United States)

    Yuan, Song; Duan, Baoxing; Cao, Zhen; Guo, Haijun; Yang, Yintang

    2016-09-01

    In this paper, a two-dimensional analytical model is established for the Buried Oxide Double Step Silicon On Insulator structure proposed by the authors. Based on the two-dimensional Poisson equation, the analytic expressions of the surface electric field and potential distributions for the device are achieved. In the BODS (Buried Oxide Double Step Silicon On Insulator) structure, the buried oxide layer thickness changes stepwise along the drift region, and the positive charge in the drift region can be accumulated at the corner of the step. These accumulated charge function as the space charge in the depleted drift region. At the same time, the electric field in the oxide layer also varies with the different drift region thickness. These variations especially the accumulated charge will modulate the surface electric field distribution through the electric field modulation effects, which makes the surface electric field distribution more uniform. As a result, the breakdown voltage of the device is improved by 30% compared with the conventional SOI structure. To verify the accuracy of the analytical model, the device simulation software ISE TCAD is utilized, the analytical values are in good agreement with the simulation results by the simulation software. That means the established two-dimensional analytical model for BODS structure is valid, and it also illustrates the breakdown voltage enhancement by the electric field modulation effect sufficiently. The established analytical models will provide the physical and mathematical basis for further analysis of the new power devices with the patterned buried oxide layer.

  8. Chloride adsorption by calcined layered double hydroxides in hardened Portland cement paste

    KAUST Repository

    Yoon, Seyoon

    2014-06-01

    This study investigated the feasibility of using calcined layered double hydroxides (CLDHs) to prevent chloride-induced deterioration in reinforced concrete. CLDHs not only adsorbed chloride ions in aqueous solution with a memory effect but also had a much higher binding capacity than the original layered double hydroxides (LDHs) in the cement matrix. We investigated this adsorption in hardened cement paste in batch cultures to determine adsorption isotherms. The measured and theoretical binding capacities (153 mg g -1 and 257 mg g-1, respectively) of the CLDHs were comparable to the theoretical capacity of Friedel\\'s salt (2 mol mol-1 or 121 mg g-1), which belongs to the LDH family among cementitious phases. We simulated chloride adsorption by CLDHs through the cement matrix using the Fickian model and compared the simulation result to the X-ray fluorescence (XRF) chlorine map. Based on our results, it is proposed that the adsorption process is governed by the chloride transport through the cement matrix; this process differs from that in an aqueous solution. X-ray diffraction (XRD) analysis showed that the CLDH rebuilds the layered structure in a cementitious environment, thereby demonstrating the feasibility of applying CLDHs to the cement and concrete industries. © 2014 Published by Elsevier B.V. All rights reserved.

  9. Synthesis of layered double hydroxide nanosheets by coprecipitation using a T-type microchannel reactor

    Energy Technology Data Exchange (ETDEWEB)

    Pang, Xiujiang; Sun, Meiyu; Ma, Xiuming [State Key Laboratory Base of Eco-chemical Engineering, College of Chemistry and Molecular Engineering, Qingdao University of Science and Technology, Qingdao 266042 (China); Hou, Wanguo, E-mail: wghou@sdu.edu.cn [Key Laboratory of Colloid and Interface Chemistry (Ministry of Education), Shandong University, Jinan 250100 (China)

    2014-02-15

    The synthesis of Mg{sub 2}Al–NO{sub 3} layered double hydroxide (LDH) nanosheets by coprecipitation using a T-type microchannel reactor is reported. Aqueous LDH nanosheet dispersions were obtained. The LDH nanosheets were characterized by X-ray diffraction, transmission electron microscopy, atomic force microscopy and particle size analysis, and the transmittance and viscosity of LDH nanosheet dispersions were examined. The two-dimensional LDH nanosheets consisted of 1–2 brucite-like layers and were stable for ca. 16 h at room temperature. In addition, the co-assembly between LDH nanosheets and dodecyl sulfate (DS) anions was carried out, and a DS intercalated LDH nanohybrid was obtained. To the best of our knowledge, this is the first report of LDH nanosheets being directly prepared in bulk aqueous solution. This simple, cheap method can provide naked LDH nanosheets in high quantities, which can be used as building blocks for functional materials. - Graphical abstract: Layered double hydroxide (LDH) nanosheets were synthesized by coprecipitation using a T-type microchannel reactor, and could be used as basic building blocks for LDH-based functional materials. Display Omitted - Highlights: • LDH nanosheets were synthesized by coprecipitation using a T-type microchannel reactor. • Naked LDH nanosheets were dispersed in aqueous media. • LDH nanosheets can be used as building blocks for functional materials.

  10. Molecular modeling of layered double hydroxide intercalated with benzoate, modeling and experiment.

    Science.gov (United States)

    Kovár, Petr; Pospísil, M; Nocchetti, M; Capková, P; Melánová, Klára

    2007-08-01

    The structure of Zn4Al2 Layered Double Hydroxide intercalated with benzencarboxylate (C6H5COO-) was solved using molecular modeling combined with experiment (X-ray powder diffraction, IR spectroscopy, TG measurements). Molecular modeling revealed the arrangement of guest molecules, layer stacking, water content and water location in the interlayer space of the host structure. Molecular modeling using empirical force field was carried out in Cerius(2) modeling environment. Results of modeling were confronted with experiment that means comparing the calculated and measured diffraction pattern and comparing the calculated water content with the thermogravimetric value. Good agreement has been achieved between calculated and measured basal spacing: d(calc) = 15.3 A and d(exp) = 15.5 A. The number of water molecules per formula unit (6H2O per Zn4Al2(OH)12) obtained by modeling (i.e., corresponding to the energy minimum) agrees with the water content estimated by thermogravimetry. The long axis of guest molecules are almost perpendicular to the LDH layers, anchored to the host layers via COO- groups. Mutual orientation of benzoate ring planes in the interlayer space keeps the parquet arrangement. Water molecules are roughly arranged in planes adjacent to host layers together with COO- groups.

  11. Multilayer films of layered double hydroxide/polyaniline and their ammonia sensing behavior

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Dong-Mei; Guan, Mei-Yu; Xu, Qing-Hong; Guo, Ying, E-mail: guoying@mail.buct.edu.cn

    2013-11-15

    Highlights: • (ZnAl-LDH/PANI){sub n} multilayer films have been fabricated via a layer-by-layer assembly way. • The multilayer films have relatively ordered morphology and controllable thickness. • The multilayer films show extremely high selectivity to ammonia at room temperature. -- Abstract: This paper reports the fabrication of layered double hydroxide (LDH)/conductive polymer multilayer films by alternate assembly of exfoliated ZnAl-LDH nanosheets and polyaniline (PANI) on silicon wafer substrates using the layer-by-layer (LBL) deposition technology. UV–vis absorption spectroscopy indicates a stepwise and regular growth of the (LDH/PANI){sub n} multilayer films upon increasing deposition cycles. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) demonstrate that the surfaces of the films are microscopy smooth and uniform with a thickness of 2 nm per bilayer. Furthermore, the resulting (LDH/PANI){sub n} multilayer films possess high selectively response to ammonia at room temperature. The presence of LDH nanosheets plays a critical role on the gas sensing for the pure PANI film has very low response to ammonia. The LBL assembly process based on LDH combines the conducting polymer and nano-inorganic material, which provides opportunities to develop new inorganic–organic films for gas sensing.

  12. Design study of double-layer beam trajectory accelerator based on the Rhodotron structure

    Science.gov (United States)

    Jabbari, Iraj; Poursaleh, Ali Mohammad; Khalafi, Hossein

    2016-08-01

    In this paper, the conceptual design of a new structure of industrial electron accelerator based on the Rhodotron accelerator is presented and its properties are compared with those of Rhodotron-TT200 accelerator. The main goal of this study was to reduce the power of RF system of accelerator at the same output electron beam energy. The main difference between the new accelerator structure with the Rhodotron accelerator is the length of the coaxial cavity that is equal to the wavelength at the resonant frequency. Also two sets of bending magnets were used around the acceleration cavity in two layers. In the new structure, the beam crosses several times in the coaxial cavity by the bending magnets around the cavity at the first layer and then is transferred to the second layer using the central bending magnet. The acceleration process in the second layer is similar to the first layer. Hence, the energy of the electron beam will be doubled. The electrical power consumption of the RF system and magnet system were calculated and simulated for the new accelerator structure and TT200. Comparing the calculated and simulated results of the TT200 with those of experimental results revealed good agreement. The results showed that the overall electrical power consumption of the new accelerator structure was less than that of the TT200 at the same energy and power of the electron beam. As such, the electrical efficiency of the new structure was improved.

  13. Design study of double-layer beam trajectory accelerator based on the Rhodotron structure

    Energy Technology Data Exchange (ETDEWEB)

    Jabbari, Iraj, E-mail: i_jabbari@ast.ui.ac.ir [Department of Nuclear Engineering, Faculty of Advanced Sciences and Technologies, University of Isfahan, Isfahan 8174673441 (Iran, Islamic Republic of); Poursaleh, Ali Mohammad [Department of Nuclear Engineering, Faculty of Advanced Sciences and Technologies, University of Isfahan, Isfahan 8174673441 (Iran, Islamic Republic of); Central Iran Research Complex, NSTRI, Yazd (Iran, Islamic Republic of); Khalafi, Hossein [Central Iran Research Complex, NSTRI, Yazd (Iran, Islamic Republic of)

    2016-08-21

    In this paper, the conceptual design of a new structure of industrial electron accelerator based on the Rhodotron accelerator is presented and its properties are compared with those of Rhodotron-TT200 accelerator. The main goal of this study was to reduce the power of RF system of accelerator at the same output electron beam energy. The main difference between the new accelerator structure with the Rhodotron accelerator is the length of the coaxial cavity that is equal to the wavelength at the resonant frequency. Also two sets of bending magnets were used around the acceleration cavity in two layers. In the new structure, the beam crosses several times in the coaxial cavity by the bending magnets around the cavity at the first layer and then is transferred to the second layer using the central bending magnet. The acceleration process in the second layer is similar to the first layer. Hence, the energy of the electron beam will be doubled. The electrical power consumption of the RF system and magnet system were calculated and simulated for the new accelerator structure and TT200. Comparing the calculated and simulated results of the TT200 with those of experimental results revealed good agreement. The results showed that the overall electrical power consumption of the new accelerator structure was less than that of the TT200 at the same energy and power of the electron beam. As such, the electrical efficiency of the new structure was improved.

  14. Double-layer weekly sustained release transdermal patch containing gestodene and ethinylestradiol.

    Science.gov (United States)

    Gao, Yanli; Liang, Jinying; Liu, Jianping; Xiao, Yan

    2009-07-30

    The combination therapy of gestodene (GEST) and ethinylestradiol (EE) has shown advanced contraception effect and lower side effect. The present study was designed to develop a weekly sustained release matrix type transdermal patch containing GEST and EE using blends of different polymeric combinations. The multiple-layer technique was adopted in order to maintain a steady permeation flux for 7 days. The effects of polymer types, polymer ratios, permeation enhancers, drug loadings and drug ratios in different layers on the skin permeations of the drugs were evaluated using excised mice skin. Polariscope examination was carried out to observe the drug distribution behavior. The formulation with the mixture of polyvinyl alcohol (PVA) and polyvinyl pyrrolidone (PVP) (7:1) was found to provide the regular release and propylene glycol (PG) could enhance the permeation fluxes of drugs. Double-layer transdermal drug delivery system (TDDS) could sustain the steady permeation flux of drugs for 7 days when the ratio of drug in drug release layer and drug reservoir layer was 1:4 with the identical total drug amount. The in vitro transdermal permeation fluxes were 0.377 microg/cm(2)/h and 0.092 microg/cm(2)/h, for GEST and EE respectively. The uniformity of dosage units test showed that the distribution of drugs in the matrix was homogeneous, which was further demonstrated by the polariscope result. The developed transdermal delivery system containing GEST and EE could be a promising non-oral contraceptive method.

  15. Universal biomimetic preparation and immobilization of layered double hydroxide films and adsorption behavior

    Science.gov (United States)

    Zhou, Wei; Zhang, Wenpeng; Chen, Zilin

    2017-01-01

    Preparation and immobilization of layered double hydroxides (LDHs) film onto multiple substrates is important and challenging in functional materials fields by date. In this work, a simple and universal polydopamine (PD)-based layer-by-layer assembly strategy was developed for the immobilization of LDHs film onto surfaces such as polypropylene chip, glass slides and metal coins. The surface of substrates was firstly modified by polydopamine functionalization, and then LDHs film was synthesized via urea method and directly immobilized on the PD layer by in situ growing strategy in one step. The PD layer as well as the final LDHs film was characterized by energy dispersive X-ray spectroscopy, scanning electron microscope, infrared spectroscopy, X-ray diffraction pattern and X-ray photoelectron spectra. It has been demonstrated the formation of the dense and homogeneous nanoscaled LDHs film with 400 nm thickness. Adsorption behavior of the fabricated NiAl-LDHs film toward anionic dyes and pharmaceuticals was further assessed. To demonstrate their extensive application, fast and high efficient adsorption of anionic dyes and pharmaceuticals was achieved by NiAl-LDHs-modified polypropylene centrifugal tube.

  16. Ultrafast switching of an electrochromic device based on layered double hydroxide/Prussian blue multilayered films

    Science.gov (United States)

    Liu, Xiaoxi; Zhou, Awu; Dou, Yibo; Pan, Ting; Shao, Mingfei; Han, Jingbin; Wei, Min

    2015-10-01

    Electrochromic materials are the most important and essential components in an electrochromic device. Herein, we fabricated high-performance electrochromic films based on exfoliated layered double hydroxide (LDH) nanosheets and Prussian blue (PB) nanoparticles via the layer-by-layer assembly technique. X-ray diffraction and UV-vis absorption spectroscopy indicate a periodic layered structure with uniform and regular growth of (LDH/PB)n ultrathin films (UTFs). The resulting (LDH/PB)n UTF electrodes exhibit electrochromic behavior arising from the reversible K+ ion migration into/out of the PB lattice, which induces a change in the optical properties of the UTFs. Furthermore, an electrochromic device (ECD) based on the (LDH/PB)n-ITO/0.1 M KCl electrolyte/ITO sandwich structure displays superior response properties (0.91/1.21 s for coloration/bleaching), a comparable coloration efficiency (68 cm2 C-1) and satisfactory optical contrast (45% at 700 nm), in comparison with other inorganic material-based ECDs reported previously. Therefore, this work presents a facile and cost-effective strategy to immobilize electrochemically active nanoparticles in a 2D inorganic matrix for potential application in displays, smart windows and optoelectronic devices.Electrochromic materials are the most important and essential components in an electrochromic device. Herein, we fabricated high-performance electrochromic films based on exfoliated layered double hydroxide (LDH) nanosheets and Prussian blue (PB) nanoparticles via the layer-by-layer assembly technique. X-ray diffraction and UV-vis absorption spectroscopy indicate a periodic layered structure with uniform and regular growth of (LDH/PB)n ultrathin films (UTFs). The resulting (LDH/PB)n UTF electrodes exhibit electrochromic behavior arising from the reversible K+ ion migration into/out of the PB lattice, which induces a change in the optical properties of the UTFs. Furthermore, an electrochromic device (ECD) based on the (LDH

  17. Large amplitude ion-acoustic double layers in warm dusty plasma

    Science.gov (United States)

    Jain, S. L.; Tiwari, R. S.; Mishra, M. K.

    2015-01-01

    Large amplitude ion-acoustic double layer (IADL) is studied using Sagdeev's pseudo-potential technique in collisionless unmagnetized plasma comprising hot and cold Maxwellian population of electrons, warm adiabatic ions, and dust grains. Variation of both Mach number (M) and amplitude |φ m | of large amplitude IADL with charge, concentration, and mass of heavily charged massive dust grains is investigated for both positive and negative dust in plasma. Our numerical analysis shows that system supports only rarefactive large amplitude IADL for the selected set of plasma parameters. Our investigations for both negative and positive dust grains reveal that ion temperature increases the mobility of ions, resulting in increase in the Mach number of IADL. The larger mobility of ions causes leakage of ions from localized region, resulting into decrease in the amplitude of IADL. Other parameters, e.g. temperature ratio of hot to cold electrons, charge, concentration, mass of heavily charged massive dust grains also play significant role in the properties and existence of double layers. Since it is well established that both positive and negative dust are found in space as well as laboratory plasma, and double layers have a tremendous role to play in astrophysics, we have included both positive and negative dust in our numerical analysis for the study of large amplitude IADL. Further data used for negative dust are close to experimentally observed data. Hence, it is anticipated that our parametric studies for heavily charged (both positive and negative) dust may be useful in understanding laboratory plasma experiments, identifying nonlinear structures in upper part of ionosphere and lower part of magnetosphere structures, and in theoretical research for the study of properties of nonlinear structures.

  18. Thickness dependence of the levitation performance of double-layer high-temperature superconductor bulks above a magnetic rail

    Science.gov (United States)

    Sun, R. X.; Zheng, J.; Liao, X. L.; Che, T.; Gou, Y. F.; He, D. B.; Deng, Z. G.

    2014-10-01

    A double-layer high-temperature superconductor (HTSC) arrangement was proposed and proved to be able to bring improvements to both levitation force and guidance force compared with present single-layer HTSC arrangement. To fully exploit the applied magnetic field by a magnetic rail, the thickness dependence of a double-layer HTSC arrangement on the levitation performance was further investigated in the paper. In this study, the lower-layer bulk was polished step by step to different thicknesses, and the upper-layer bulk with constant thickness was directly superimposed on the lower-layer one. The levitation force and the force relaxation of the double-layer HTSC arrangement were measured above a Halbach magnetic rail. Experimental result shows that a bigger levitation force and a less levitation force decay could be achieved by optimizing the thickness of the lower-layer bulk HTSC. This thickness optimization method could be applied together with former reported double-layer HTSC arrangement method with aligned growth sector boundaries pattern. This series of study on the optimized combination method do bring a significant improvement on the levitation performance of present HTS maglev systems.

  19. Double Layers: Potential Formation and Related Nonlinear Phenomena in Plasmas: Proceedings of the 5th Symposium

    Science.gov (United States)

    Iizuka, S.

    1998-02-01

    The Table of Contents for the book is as follows: * PREFACE * INTERNATIONAL SCIENTIFIC COMMITTEE * LOCAL ORGANIZING COMMITTEE AT TOHOKU UNIVERSITY * CHAPTER 1: DOUBLE LAYERS, SHEATHS, AND POTENTIAL STRUCTURES * 1.1 Double Layers * On Fluid Models of Stationary, Acoustic Double Layers (Invited) * Particle Simulation of Double Layer (Invited) * Space-Time Dependence of Non-Steady Double Layers * The Role of Low Energy Electrons for the Generation of Anode Double Layers in Glow Discharges * Arbitrary Amplitude Ion-Acoustic Double Layers in a Dusty Plasma * 1.2 Sheaths * Bounded Plasma Edge Physics as Observed from Simulations in 1D and 2D (Invited) * Control of RF Sheath Structure in RF Diode Discharge * Observation of Density Gradients with Fine Structures and Low Frequency Wave Excitation at the Plasma-Sheath Boundary * Double Sheath Associated with an Electron Emission to a Plasma Containing Negative Ions * Sheath Edge and Floating Potential for Multi-Species Plasmas Including Dust Particles * 1.3 Potential Structures and Oscillations * Potential Structure Formed at a Constriction of a DC He Positive Column and its Coupling with Ionization Wave * Potential Structure in a New RF Magnetron Device with a Hollow Electrode * Potential Disruption in a RF Afterglow Electronegative Plasma * Potential Oscillation in a Strongly Asymmetry RF Discharge Containing Negative Ions * Effects of External Potential Control on Coulomb Dust Behavior * Potential Structure of Carbon Arc Discharge for High-Yield Fullerenes Formation * Control of Axial and Radial Potential Profiles in Tandem Mirrors (Invited) * CHAPTER 2: FIELD-ALIGNED ELECTRIC FIELDS AND RELATED PARTICLE ACCELERATIONS * 2.1 Field-Aligned Potential Formation * Formation of Large Potential Difference in a Plasma Flow along Converging Magnetic Field Lines (Invited) * Presheath Formation in front of an Oblique End-Plate in a Magnetized Sheet Plasma * Plasma Potential Formation Due to ECRH in a Magnetic Well * Electrostatic

  20. Thin-shell wormholes with a double layer in quadratic F(R) gravity

    CERN Document Server

    Eiroa, Ernesto F

    2016-01-01

    We present a family of spherically symmetric Lorentzian wormholes in quadratic F(R) gravity, with a thin shell of matter corresponding to the throat. At each side of the shell the geometry has a different constant value of the curvature scalar R. The junction conditions determine the equation of state between the pressure and energy density at the throat, where a double layer is also located. We analyze the stability of the configurations under perturbations preserving the spherical symmetry. In particular, we study thin-shell wormholes with mass and charge. We find that there exist values of the parameters for which stable static solutions are possible.

  1. Incorporation of fluorophosphate into zinc–aluminium–nitrate layered double hydroxide by ion exchange

    Indian Academy of Sciences (India)

    El Hassan Elkhattabi; Mohamed Badreddine; Moha Berraho; Ahmed Legrouri

    2012-08-01

    The intercalation of fluorophosphate (PO3F2-, FP) in the [Zn–Al] layered double hydroxides (LDHs) was investigated. A nitrate precursor was prepared by coprecipitaion at pH 9. An attempt to intercalate FP by direct coprecipitation reaction led to a poorly crystalline LDH phase. The effects of pH, aging time and anion concentration were studied and allowed to confirm that the best crystalline material, with high exchange extent, was obtained by carrying out the exchange at 25 °C in 0.1 M FP solution at pH 9 with at least 20 h of aging time.

  2. Grafted, cross-linked carbon black as a double-layer capacitor electrode material

    Energy Technology Data Exchange (ETDEWEB)

    Richner, R.; Mueller, S.; Wokaun, A.

    2001-03-01

    Isocyanate prepolymers readily react with oxidic functional groups on carbon black. On carbon black grafted with diisocyanates, reactive isocyanate groups are available for cross-linking to a polyurethane system. This cross-linked carbon black was considered as a new active material for electrochemical electrodes. Active material for electric double-layer capacitor electrodes was produced which had values of specific capacitance of up to 200 F/g. Cross-linking efficiencies of up to 58 % of the polymers utilised were achieved. (author)

  3. Study on the electric double layer of a cylindrical reverse micelle with functional theoretical approach

    Institute of Scientific and Technical Information of China (English)

    WANG; Zhengwu; GUO; Baomin; ZHANG; Gexin

    2006-01-01

    The iterative method in functional analysis is applied to looking for a solution of the Poisson-Boltzmann equation in order to describe the problems of the distribution of the potentials in the electric double layer (EDL) inside the water pool for a cylindrical inverse micelle. Potentials as a function of the position of a particular point in EDL are computed, which display a quantitative is also shown that in the higher-potential range the iterative calculations can give more accurate results. These results indicate the utility of this functional analysis technique in the description of the properties of EDL for a cylindrical inverse micelle.

  4. Effect of acid oxidization of carbon nanotube electrode on the capacitances of double layer capacitors

    Institute of Scientific and Technical Information of China (English)

    LI; Chensha; WANG; Dazhi; LIANG; Tongxiang; WANG; Xiaofen

    2004-01-01

    Polarizable electrode of electric double layer capacitor was made from carbon nanotubes. The effect of acid oxidation of electrode on the specific capacitance was studied. Oxidation removed the redundant carbon, expanded the pore size and introduced some kinds of functional groups on the surface of CNTs. The specific capacit ance of the electrodes with organic electrolyte was increased from 21.4 to 49.6 F/gafter being oxidized at a volume ratio of H2SO4 to HNO3 of 3:1.

  5. Double-layer mesh hernioplasty for repairing umbilical hernias in 10 goats*

    OpenAIRE

    2011-01-01

    Umbilical hernias in goats are uncommon and can vary in their etiology and management. Hernioplasty can be done by closing the abdominal wall with a horizontal mattress pattern using absorbable sutures. However, larger defects (hernial ring size >3 cm) generally require the use of prosthetic materials that allow for a tension-free repair. In this study, 10 young female goats with umbilical hernias and hernial ring sizes ranging from 7-10 cm in width were treated using a double-layer polypr...

  6. Mössbauer and XRD study of intercalated CaFe-layered double hydroxides

    Science.gov (United States)

    Sipiczki, Mónika; Kuzmann, Ernő; Pálinkó, István; Homonnay, Zoltán; Sipos, Pál; Kukovecz, Ákos; Kónya, Zoltán

    2014-04-01

    N-containing fully saturated (L-prolinate) or aromatic (indole-2-carboxylate) heterocyclic anions were immobilised in CaFe-layered double hydroxide with the dehydration-rehydration method from aqueous ethanol or acetone. The structure of the resulting organic-inorganic hybrids was characterised mainly with powder X-ray diffraction and 57Fe Mössbauer spectroscopy, and as supplementary analysis scanning electron microscopy, energy dispersive X-ray spectroscopy with elemental mapping and molecular modelling were also applied. It was found that the solvent mixture used for the synthesis caused enormous difference in the interlayer spacings of the obtained inorganic-organic hybrids.

  7. Removal of borate by coprecipitation with Mg/Al layered double hydroxide

    Science.gov (United States)

    Kurashina, Masashi; Inoue, Tatsuki; Tajima, Chihiro; Kanezaki, Eiji

    2015-03-01

    Borate has been used for various industrial products and excessive dose of boron is harmful to humans. We investigated the removal of borate by direct coprecipitation with Mg/Al layered double hydroxide. In this study, the maximum removal of boron was 90% when Mg 30 mmol and Al 15 mmol at pH = 10 were used for 498 mg/l as B. The boron adsorption isotherms could be fitted to Langmuir model. The calculated constant Ws, saturation limit of boron adsorption, is 25 ± 2 mg/g and it is larger than that of ion exchange reaction (Ws = 15±1 mg/g).

  8. Structure and thermal decomposition of sulfated β-cyclodextrin intercalated in a layered double hydroxide

    Science.gov (United States)

    Wang, Ji; Wei, Min; Rao, Guoying; Evans, David G.; Duan, Xue

    2004-01-01

    The sodium salt of hexasulfated β-cyclodextrin has been synthesized and intercalated into a magnesium-aluminum layered double hydroxide by ion exchange. The structure, composition and thermal decomposition behavior of the intercalated material have been studied by variable temperature X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), inductively coupled plasma emission spectroscopy (ICP), and thermal analysis (TG-DTA) and a model for the structure has been proposed. The thermal stability of the intercalated sulfated β-cyclodextrin is significantly enhanced compared with the pure form before intercalation.

  9. Analysis of Double Layer and Adsorption Effects at the Alkaline Polymer Electrolyte-Electrode Interface

    Science.gov (United States)

    2011-10-05

    Block 13: Supplementary Note © 2011 . Published in Journal of the Electrochemical Society , Vol. Ed. 0 (2011), (Ed. ). DoD Components reserve a royalty...unlimited. ... 55036.7-CH Journal of The Electrochemical Society , 158 (11) B1423-B1431 (2011) B1423 0013-4651/2011/158(11)/B1423/9/$28.00 © The... Electrochemical Society Analysis of Double Layer and Adsorption Effects at the Alkaline Polymer Electrolyte-Electrode Interface Murat Ünlü,a,∗ Daniel Abbott,b

  10. Anion-exchange membranes derived from quaternized polysulfone and exfoliated layered double hydroxide for fuel cells

    Science.gov (United States)

    Liu, Wan; Liang, Na; Peng, Pai; Qu, Rong; Chen, Dongzhi; Zhang, Hongwei

    2017-02-01

    Layered double hydroxides (LDH) are prepared by controlling urea assisted homogeneous precipitation conditions. Morphology and crystallinity of LDHs are confirmed by X-ray diffraction and scanning electron microscope. After LDHs are incorporated into quaternized polysulfone membranes, transmission electron microscope is used to observe the exfoliated morphology of LDH sheets in the membranes. The properties of the nanocomposite membranes, including water uptake, swelling ratio, mechanical property and ionic conductivity are investigated. The nanocomposite membrane containing 5% LDH sheets shows more balanced performances, exhibiting an ionic conductivity of 2.36×10-2 S cm-1 at 60 °C.

  11. Dynamic Reliability Evaluation of Double-Layer Cylindrical Latticed Shell under Multi-Support Excitations

    Institute of Scientific and Technical Information of China (English)

    柳春光; 李会军

    2010-01-01

    To overcome the excessive computational cost and/or bad accuracy of traditional approaches,the probabilistic density evolution method(PDEM) is introduced.The dynamic reliability of a double-layer cylindrical latticed shell is evaluated by applying PDEM and Monte Carlo Method(MCM) respectively,and four apparent wave velocities(100 m/s,500 m/s,800 m/s and 1 200 m/s) and five thresholds(0.1 m,0.2 m,0.3 m,0.4 m and 0.5 m) are taken into consideration.Only the difference between threshold and maximal deformation...

  12. Thermal Analysis On The Kinetics Of Magnesium-Aluminum Layered Double Hydroxides In Different Heating Rates

    Directory of Open Access Journals (Sweden)

    Hongbo Y.

    2015-06-01

    Full Text Available The thermal decomposition of magnesium-aluminum layered double hydroxides (LDHs was investigated by thermogravimetry analysis and differential scanning calorimetry (DSC methods in argon environment. The influence of heating rates (including 2.5, 5, 10, 15 and 20K/min on the thermal behavior of LDHs was revealed. By the methods of Kissinger and Flynn-Wall-Ozawa, the thermal kinetic parameters of activation energy and pre-exponential factor for the exothermic processes under non-isothermal conditions were calculated using the analysis of corresponding DSC curves.

  13. Ion-acoustic double layers in the presence of plasma source

    Energy Technology Data Exchange (ETDEWEB)

    Okuda, H.; Ashour-Abdalla, M.

    1981-11-01

    Steady-state plasma turbulence and formation of negative potential spikes and double layers in the presence of ion acoustic instabilities have been studied by means of one-dimensional particle simulations in which velocities of a small fraction of electrons are replaced by the initial drifting Maxwellian at a constant rate. A steady state is found where negative potential spikes appear randomly in space and time giving rise to an anomalous resistivity much greater than previously found. Comparisons of the simulation results with laboratory and space plasmas are discussed.

  14. Electric Double Layer Gate Field-Effect Transistors Based on Si

    Science.gov (United States)

    Yanase, Takashi; Shimada, Toshihiro; Hasegawa, Tetsuya

    2010-04-01

    Electric double layer field-effect transistors (EDL-FETs) were fabricated using single crystal Si wafer as the active semiconductor and various characteristics were studied including dynamic response against step-function gate bias. The static FET mobility was more than 100 cm2 V-1 s-1. The response time of the drain current was 20 µs for ionic liquid and 3 ms for poly(ethylene glycol) (PEG) solution of LiBF4. Unexpected fast response was observed at a certain “speed up bias” condition. This effect will be useful to switching circuits using EDL-FETs.

  15. Preparation of Layered Double Hydroxide-Immobilized Lipase for High Yield and Optically Active (-)-Menthyl butyrate

    Institute of Scientific and Technical Information of China (English)

    Siti; Salhah; Othman; Mahiran; Basri; Mohd.Zobir; Hussein; Mohd; Basyaruddin; Abdul; Rahman; Raja; Noor; Zaliha; Raja; Abdul; Rahman; Abu; Bakar; Salleh; Salina; Mat; Radzi; Azwani; Sofia; Ahmad; Khiar

    2007-01-01

    1 Results Layered Double Hydroxide (LDH) finds extensive usage in the areas of pharmaceutical sciences and catalysis. In this study, a member of the LDH family, Mg/Al-hydrotalcite (HT), or the so-called anionic clay, was prepared at ratio 4 (HT) by co-precipitating through continuous agitation. X-ray diffraction pattern and thermogravimetric analysis of the material indicated that a pure HT had been successfully synthesized. This matrix was then used as support in the immobilization of lipase from Cand...

  16. Preparation and evaluation of PEGylated phospholipid membrane coated layered double hydroxide nanoparticles

    Directory of Open Access Journals (Sweden)

    Mina Yan

    2016-06-01

    Full Text Available The aim of the present study was to develop layered double hydroxide (LDH nanoparticles coated with PEGylated phospholipid membrane. By comparing the size distribution and zeta potential, the weight ratio of LDH to lipid materials which constitute the outside membrane was identified as 2:1. Transmission electron microscopy photographs confirmed the core-shell structure of PEGylated phospholipid membrane coated LDH (PEG-PLDH nanoparticles, and cell cytotoxicity assay showed their good cell viability on Hela and BALB/C-3T3 cells over the concentration range from 0.5 to 50 μg/mL.

  17. Direct decarbonation of micrometer-scale layered double hydroxides without morphology damage

    Institute of Scientific and Technical Information of China (English)

    Kong Li Xu; Guang Ming Chen; Jian Quan Shen

    2012-01-01

    A direct decarbonation route without obvious morphology damage was developed for large micrometer-scale layered double hydroxides (LDHs).First,we synthesized pure,hexagonal-shaped LDHs with lateral dimension of micrometer-size by the recently reported urea hydrolysis method.Then,using HNO3-NaNO3 mixed solution,the obtained LDH with carbonate anions in the interlayer (LDH_CO3) was directly decarbonated to its nitrate form,LDH_NO3,its morphology and particle size were still unchanged.Compared with the recently published two-step decarbonation method,the direct decarbonation reported herein is very convenient.

  18. Shock dynamics induced by double-spot laser irradiation of layered targets

    Directory of Open Access Journals (Sweden)

    Aliverdiev Abutrab A.

    2015-06-01

    Full Text Available We studied the interaction of a double-spot laser beam with targets using the Prague Asterix Laser System (PALS iodine laser working at 0.44 μm wavelength and intensity of about 1015 W/cm2. Shock breakout signals were recorder using time-resolved self-emission from target rear side of irradiated targets. We compared the behavior of pure Al targets and of targets with a foam layer on the laser side. Results have been simulated using hydrodynamic numerical codes.

  19. Ultra low frequency waves observed by Double Star TC-1 in the plasmasphere boundary layer

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    The characteristic and properties of ULF waves in the plasmasphere boundary layer during two very quiet periods are present. The ULF waves were detected by Double Star TC-1 when the spacecraft passed through the plasmasphere in an outbound and inbound trajectories, respectively. A clear association between the ULF waves and periodic variations of energetic ions fluxes was observed. The ob-servations showed that the wave frequency was higher inside the plasmasphere than outside. The mechanism generating these ULF waves and possible diagnos-ing of the "classical plasmapause" location with the ULF wave were discussed.

  20. Optimization of Magnet Arrangement in Double-Layer Interior Permanent-Magnet Motors

    Science.gov (United States)

    Yamazaki, Katsumi; Kitayuguchi, Kazuya

    The arrangement of permanent magnets in double-layer interior permanent-magnet motors is optimized for variable-speed applications. First, the arrangement of magnets is decided by automatic optimization. Next, the superiority of the optimized motor is discussed by the d- and q-axis equivalent circuits that consider the magnetic saturation of the rotor core. Finally, experimental verification is carried out by using a prototype motor. It is confirmed that the maximum torque of the optimized motor under both low speed and high speed conditions are higher than those of conventional motors because of relatively large q-axis inductance and small d-axis inductance.

  1. Influence of ions on relativistic double layers radiation in astrophysical plasmas

    Directory of Open Access Journals (Sweden)

    AM Ahadi

    2009-12-01

    Full Text Available As double layers (DLs are one of the most important acceleration mechanisms in space as well as in laboratory plasmas, they are studied from different points of view. In this paper, the emitted power and energy radiated from charged particles, accelerated in relativistic cosmic DLs are investigated. The effect of the presence of additional ions in a multi-species plasma, as a real example of astrophysical plasma, is also investigated. Considering the acceleration role of DLs, radiations from accelerated charged particles could be seen as a loss mechanism. These radiations are influenced directly by the additional ion species as well as their relative densities.

  2. Cobalt-based layered double hydroxides as oxygen evolving electrocatalysts in neutral electrolyte

    Science.gov (United States)

    Lin, Hong; Zhang, Ye; Wang, Gang; Li, Jian-Bao

    2012-06-01

    Co-M (M= Co, Ni, Fe, Mn) layered double hydroxides (LDHs) were successfully fabricated by a hexamethylenetetramine (HMT) pyrolysis method. Composite electrodes were made using a self-assembly fashion at inorganic/organic surface binder-free and were used to catalyze oxygen evolution reaction. Water oxidation can take place in neutral electrolyte operating with modest overpotential. The doping of other transitional metal cations affords mix valences and thus more intimate electronic interactions for reversible chemisorption of dioxygen molecules. The application of employing LDH materials in water oxidation process bodes well to facilitate future hydrogen utilization.

  3. Pattern Formation in Double-Layer Kerr Resonators with Coupled Modes

    CERN Document Server

    Bois, Antoine

    2016-01-01

    A double-layer Kerr resonator in which both coupled modes are excited and interact with each other via incoherent cross-phase modulation is investigated to reveal stable localized solutions beyond the usual formation mechanism involving a single mode. Periodic solutions from modulational instability are found to occur at a slight penalty on the nonlinear efficiency, but they stabilize the spatial dynamics, leading to dissipative solitons in previously unattainable regimes. Numerical simulations show paired breather solitons in addition to temporally stable solutions. The results demonstrate coupled modes can increase the stability of Kerr frequency comb generation.

  4. Double-Layer Gadolinium Zirconate/Yttria-Stabilized Zirconia Thermal Barrier Coatings Deposited by the Solution Precursor Plasma Spray Process

    Science.gov (United States)

    Jiang, Chen; Jordan, Eric H.; Harris, Alan B.; Gell, Maurice; Roth, Jeffrey

    2015-08-01

    Advanced thermal barrier coatings (TBCs) with lower thermal conductivity, increased resistance to calcium-magnesium-aluminosilicate (CMAS), and improved high-temperature capability, compared to traditional yttria-stabilized zirconia (YSZ) TBCs, are essential to higher efficiency in next generation gas turbine engines. Double-layer rare-earth zirconate/YSZ TBCs are a promising solution. From a processing perspective, solution precursor plasma spray (SPPS) process with its unique and beneficial microstructural features can be an effective approach to obtaining the double-layer microstructure. Previously durable low-thermal-conductivity YSZ TBCs with optimized layered porosity, called the inter-pass boundaries (IPBs) were produced using the SPPS process. In this study, an SPPS gadolinium zirconate (GZO) protective surface layer was successfully added. These SPPS double-layer TBCs not only retained good cyclic durability and low thermal conductivity, but also demonstrated favorable phase stability and increased surface temperature capabilities. The CMAS resistance was evaluated with both accumulative and single applications of simulated CMAS in isothermal furnaces. The double-layer YSZ/GZO exhibited dramatic improvement in the single application, but not in the continuous one. In addition, to explore their potential application in integrated gasification combined cycle environments, double-layer TBCs were tested under high-temperature humidity and encouraging performance was recorded.

  5. Layered double hydroxide-based nanomaterials as highly efficient catalysts and adsorbents.

    Science.gov (United States)

    Li, Changming; Wei, Min; Evans, David G; Duan, Xue

    2014-11-01

    Layered double hydroxides (LDHs) are a class of anion clays consisting of brucite-like host layers and interlayer anions, which have attracted increasing interest in the fields of catalysis/adsorption. By virtue of the versatility in composition, morphology, and architecture of LDH materials, as well as their unique structural properties (intercalation, topological transformation, and self-assembly with other functional materials), LDHs display great potential in the design and fabrication of nanomaterials applied in photocatalysis, heterogeneous catalysis, and adsorption/separation processes. Taking advantage of the structural merits and various control synthesis strategies of LDHs, the active center structure (e.g., crystal facets, defects, geometric and electronic states, etc.) and macro-nano morphology can be facilely manipulated for specific catalytic/adsorbent processes with largely enhanced performances. In this review, the latest advancements in the design and preparation of LDH-based functional nanomaterials for sustainable development in catalysis and adsorption are summarized.

  6. Atomistic simulation of nanoporous layered double hydroxide materials and their properties. I. Structural modeling

    Science.gov (United States)

    Kim, Nayong; Kim, Yongman; Tsotsis, Theodore T.; Sahimi, Muhammad

    2005-06-01

    An atomistic model of layered double hydroxides, an important class of nanoporous materials, is presented. These materials have wide applications, ranging from adsorbents for gases and liquid ions to nanoporous membranes and catalysts. They consist of two types of metallic cations that are accommodated by a close-packed configuration of OH- and other anions in a positively charged brucitelike layer. Water and various anions are distributed in the interlayer space for charge compensation. A modified form of the consistent-valence force field, together with energy minimization and molecular dynamics simulations, is utilized for developing an atomistic model of the materials. To test the accuracy of the model, we compare the vibrational frequencies, x-ray diffraction patterns, and the basal spacing of the material, computed using the atomistic model, with our experimental data over a wide range of temperature. Good agreement is found between the computed and measured quantities.

  7. Texture effect of layered double hydroxides on chemisorption of Orange II

    Science.gov (United States)

    Géraud, Erwan; Bouhent, Mustapha; Derriche, Zoubir; Leroux, Fabrice; Prévot, Vanessa; Forano, Claude

    2007-05-01

    The chemisorption properties of hydrotalcite (HT) with novel macroporous properties have been investigated for azo dye, Orange II (O-II), and compared to coprecipitated HT and their calcined derivatives. Adsorption isotherms satisfactorily fit the Langmuir model. Adsorption capacities of the layered double hydroxides (LDH) macroporous structures are very high, particularly for the calcined materials (4.34 mmol/g) compared to standard HT (0.504 mmol/g), showing that accessibility to the LDH layer surface insures better sorptive properties. For both synthetic materials, the calcination/reconstruction process gives rise to highest concentrations of adsorbed O-II and a partial intercalation of O-II molecules in the structure as shown by the expansion of the basal spacing (d=2.4nm). Conversely, the uncalcined HT phases mainly display a surface exchange chemisorption process.

  8. Interlayer Structure of Bioactive Molecule, 2-Aminoethanesulfonate, Intercalated into Calcium-Containing Layered Double Hydroxides

    Directory of Open Access Journals (Sweden)

    Tae-Hyun Kim

    2012-01-01

    Full Text Available We have successfully intercalated 2-aminoethanesulfonate, a well-known biomolecule taurine, into calcium-containing layered double hydroxides via optimized solid phase intercalation. According to X-ray diffraction patterns and infrared spectroscopy, it was revealed that the intercalated taurine molecules were each directly coordinated to other calcium cation and arranged in a zig-zag pattern. Scanning electron microscopy showed that the particle size and morphology of the LDHs were not affected by the solid phase intercalation, and the surface of intercalates was covered by organic moieties. From ninhydrin amine detection tests, we confirmed that most of the taurine molecules were well stabilized between the calcium-containing LDH layers.

  9. Reciprocity in spatial evolutionary public goods game on double-layered network

    Science.gov (United States)

    Kim, Jinho; Yook, Soon-Hyung; Kim, Yup

    2016-08-01

    Spatial evolutionary games have mainly been studied on a single, isolated network. However, in real world systems, many interaction topologies are not isolated but many different types of networks are inter-connected to each other. In this study, we investigate the spatial evolutionary public goods game (SEPGG) on double-layered random networks (DRN). Based on the mean-field type arguments and numerical simulations, we find that SEPGG on DRN shows very rich interesting phenomena, especially, depending on the size of each layer, intra-connectivity, and inter-connected couplings, the network reciprocity of SEPGG on DRN can be drastically enhanced through the inter-connected coupling. Furthermore, SEPGG on DRN can provide a more general framework which includes the evolutionary dynamics on multiplex networks and inter-connected networks at the same time.

  10. Modification of nano-sized layered double hydroxides by long-chain organic aliphatic surfactants

    Directory of Open Access Journals (Sweden)

    RAMASAMY ANBARASAN

    2008-03-01

    Full Text Available The inter-layer anion of layered double hydroxides (LDH with a hydrotalcite (HT-like structure was ion-exchanged with various organic surfactants, particularly with long chain aliphatic surfactants. After the ion-exchange process, the basal spacing of the LDH was increased and the increase of the basal spacing depended on various factors, such as the intercalation capacity functionality and orientation capability of the surfactant. Of the employed surfactants, stearic acid intercalated LDH showed the highest increase of the basal spacing, which was confirmed by XRD analysis. FTIR results supported the interaction of the surfactants with the LDH. In addition, an increase in the thermal stability of the dodecanedioic acid intercalated HT was evidenced by the TGA method.

  11. Immobilization of HRP Enzyme on Layered Double Hydroxides for Biosensor Application

    Directory of Open Access Journals (Sweden)

    Zouhair M. Baccar

    2011-01-01

    Full Text Available We present a new biosensor for hydrogen peroxide (H2O2 detection. The biosensor was based on the immobilization of horseradish peroxidase (HRP enzyme on layered double hydroxides- (LDH- modified gold surface. The hydrotalcite LDH (Mg2Al was prepared by coprecipitation in constant pH and in ambient temperature. The immobilization of the peroxidase on layered hybrid materials was realized via electrostatic adsorption autoassembly process. The detection of hydrogen peroxide was successfully observed in PBS buffer with cyclic voltammetry and the chronoamperometry techniques. A limit detection of 9 μM of H2O2 was obtained with a good reproducibility. We investigate the sensitivity of our developed biosensor for H2O2 detection in raw milk.

  12. Layered double hydroxides as carriers for quantum dots@silica nanospheres

    Science.gov (United States)

    Stoica, Georgiana; Castelló Serrano, Iván.; Palomares, Emilio

    2013-02-01

    Quantum dot-hydrotalcite layered nanoplatforms were successfully prepared following a one-pot synthesis. The process is very fast and a priori delamination of hydrotalcite is not a prerequisite for the intercalation of quantum dots. The novel materials were extensively characterized by X-ray diffraction, thermogravimetry, infrared spectroscopy, transmission electron microscopy, true color fluorescence microscopy, photoluminescence, and nitrogen adsorption. The quantum dot-hydrotalcite nanomaterials display extremely high stability in mimicking physiological media such as saline serum (pH 5.5) and PBS (pH 7.2). Yet, quantum dot release from the solid structure is noted. In order to prevent the leaking of quantum dots we have developed a novel strategy which consists on using tailor made double layered hydrotalcites as protecting shells for quantum dots embedded into silica nanospheres without changing either the materials or the optical properties.

  13. Theoretical analysis of transverse impact response in double layer graphene sheets

    Directory of Open Access Journals (Sweden)

    Toshiaki Natsuki

    2016-01-01

    Full Text Available In designing future nanoscale devices or nanostructures as new element in structural mechanics, it is very important to predict the responses for these elements against various mechanical loading conditions. In this letter, an analytical solution of the impact response in double layer graphene sheets (DLGSs is presented using a continuum mechanics theory. In this analytical model, the DLGSs are considered as a layer stack of two individual graphene sheet (GS bound together by van der Waals (vdW forces. The influence of impact velocity and mass on the impact response are predicted by using numerical simulation. The result shows that impact response of GSs subjected to nanomass has exceedingly short times with picoseconds order.

  14. Terahertz wave generation and detection in double-graphene layered van der Waals heterostructures

    Science.gov (United States)

    Yadav, Deepika; Boubanga Tombet, Stephane; Watanabe, Takayuki; Arnold, Stevanus; Ryzhii, Victor; Otsuji, Taiichi

    2016-12-01

    We report on the first experimental observation of terahertz emission and detection in a double graphene layered (GL) heterostructure which comprises a thin hexagonal-boron nitride tunnel-barrier layer sandwiched between two separately contacted GLs. Inter-GL population inversion is induced by electrically biasing the structure. Resonant tunneling and negative differential resistance is expected when the two graphene band structures are perfectly aligned. However, in the case of small misalignments we demonstrate that the photon-absorption/emission-assisted non-resonant- and resonant-tunneling causes all excess charges in the n-type GL to recombine with the holes in the p-type GL giving rise to an increased measured dc current. This work highlights a novel strategy for the realization of efficient voltage-tunable terahertz emitters and detectors.

  15. PREPARATION OF POLY(METHYL METHACRYLATE)/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    An exfoliated layered double hydroxides/poly(methyl methacrylate) (LDHs/PMMA) nanocomposite was prepared by in situ solution polymerization of methyl methacrylate (MMA) in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs). MgAl-VBS LDHs was prepared by the ion exchange method, and the structure and composition of the MgAl-VBS LDHs were determined by X-ray diffraction (XRD), infrared spectroscopy and elemental analysis. XRD and transmission electron microscopy (TEM) were employed to examine the structure of LDHs/PMMA nanocomposite. It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix. The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.

  16. Zn-Co layered double hydroxide modified hematite photoanode for enhanced photoelectrochemical water splitting

    Science.gov (United States)

    Xu, Dongyu; Rui, Yichuan; Li, Yaogang; Zhang, Qinghong; Wang, Hongzhi

    2015-12-01

    Zinc-cobalt layered double hydroxide (LDH) was electrodeposited on Ti-doped hematite photoanodes for the first time, and a significant enhanced performance for photoelectrochemical water splitting was demonstrated over the composite photoanodes. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopy (EIS) were characterized with the resulted photoanodes. With the electrodepositing treatment, the photocurrent density increased from 1.27 mA/cm2 for pristine hematite to 1.73 mA/cm2 for modified materials at 1.23 V vs. RHE (i.e. 36% improvement). The photocurrent improvement is mainly attributed to a suppression of electron-hole recombination and reduced overpotential for water oxidation at the hematite-electrolyte interface due to the formation of Zn-Co LDH layer on hematite.

  17. Strategy for synthesizing quantum dot-layered double hydroxide nanocomposites and their enhanced photoluminescence and photostability.

    Science.gov (United States)

    Cho, Seungho; Jung, Sungwook; Jeong, Sanghwa; Bang, Jiwon; Park, Joonhyuck; Park, Youngrong; Kim, Sungjee

    2013-01-08

    Layered double hydroxide-quantum dot (LDH-QD) composites are synthesized via a room temperature LDH formation reaction in the presence of QDs. InP/ZnS (core/shell) QD, a heavy metal free QD, is used as a model constituent. Interactions between QDs (with negative zeta potentials), decorated with dihydrolipoic acids, and inherently positively charged metal hydroxide layers of LDH during the LDH formations are induced to form the LDH-QD composites. The formation of the LDH-QD composites affords significantly enhanced photoluminescence quantum yields and thermal- and photostabilities compared to their QD counterparts. In addition, the fluorescence from the solid LDH-QD composite preserved the initial optical properties of the QD colloid solution without noticeable deteriorations such as red-shift or deep trap emission. Based on their advantageous optical properties, we also demonstrate the pseudo white light emitting diode, down-converted by the LDH-QD composites.

  18. Synthesis of layered double hydroxide nanosheets by coprecipitation using a T-type microchannel reactor

    Science.gov (United States)

    Pang, Xiujiang; Sun, Meiyu; Ma, Xiuming; Hou, Wanguo

    2014-02-01

    The synthesis of Mg2Al-NO3 layered double hydroxide (LDH) nanosheets by coprecipitation using a T-type microchannel reactor is reported. Aqueous LDH nanosheet dispersions were obtained. The LDH nanosheets were characterized by X-ray diffraction, transmission electron microscopy, atomic force microscopy and particle size analysis, and the transmittance and viscosity of LDH nanosheet dispersions were examined. The two-dimensional LDH nanosheets consisted of 1-2 brucite-like layers and were stable for ca. 16 h at room temperature. In addition, the co-assembly between LDH nanosheets and dodecyl sulfate (DS) anions was carried out, and a DS intercalated LDH nanohybrid was obtained. To the best of our knowledge, this is the first report of LDH nanosheets being directly prepared in bulk aqueous solution. This simple, cheap method can provide naked LDH nanosheets in high quantities, which can be used as building blocks for functional materials.

  19. Toward high-energy laser-driven ion beams: Nanostructured double-layer targets

    Science.gov (United States)

    Passoni, M.; Sgattoni, A.; Prencipe, I.; Fedeli, L.; Dellasega, D.; Cialfi, L.; Choi, Il Woo; Kim, I. Jong; Janulewicz, K. A.; Lee, Hwang Woon; Sung, Jae Hee; Lee, Seong Ku; Nam, Chang Hee

    2016-06-01

    The development of novel target concepts is crucial to make laser-driven acceleration of ion beams suitable for applications. We tested double-layer targets formed of an ultralow density nanostructured carbon layer (˜7 mg/cm 3 , 8 - 12 μ m -thick) deposited on a μ m -thick solid Al foil. A systematic increase in the total number of the accelerated ions (protons and C6 + ) as well as enhancement of both their maximum and average energies was observed with respect to bare solid foil targets. Maximum proton energies up to 30 MeV were recorded. Dedicated three-dimensional particle-in-cell simulations were in remarkable agreement with the experimental results, giving clear indication of the role played by the target nanostructures in the interaction process.

  20. Interaction of pristine hydrotalcite-like layered double hydroxides with CO2: a thermogravimetric study

    Indian Academy of Sciences (India)

    Shivanna Marappa; P Vishnu Kamath

    2015-12-01

    Metal oxides in general have surface acidic sites, but for exceptional circumstances, are not expected to mineralize CO2. Given their intrinsic basicity and an expandable interlayer gallery, the hydrotalcite-like layered double hydroxides (LDHs) are expected to be superior candidate materials for CO2 mineralization. However, the incorporation of Al3+ adversely impacts the ability of the metal hydroxide layer to interact with CO2 in the gas phase in comparison with the unitary Mg(OH)2. Thermogravimetric analysis shows that the decomposition reaction of the [Mg–Al–CO3] LDH is only marginally delayed in flowing CO2 in comparison with flowing N2, showing only an apparent marginal CO2 uptake. Al3+ ion severely attenuates the surface basicity of the LDHs, as the unitary Al(OH)3 is acidic in comparison with Mg(OH)2 and shows little or no interaction with CO2 in the gas phase.

  1. Degradation of l-polylactide during melt processing with layered double hydroxides

    DEFF Research Database (Denmark)

    Gerds, Nathalie; Katiyar, Vimal; Koch, Christian Bender;

    2012-01-01

    PLA was melt compounded in small-scale batches with two forms of laurate-modified magnesium–aluminum layered double hydroxide (Mg-Al-LDH-C12), the corresponding carbonate form (Mg-Al-LDH-CO3) and a series of other additives. Various methods were then adopted to characterize the resulting compounds...... in an effort to gain greater insights into PLA degradation during melt processing. PLA molecular weight reduction was found to vary according to the type of LDH additive. It is considered that the degree of particle dispersion and LDH exfoliation, and hence the accessibility of the hydroxide layer surfaces...... may be active degrading agents. Phosphate treatment of laurate-modified LDH was investigated and this may be a promising way of reducing PLA degradation, thereby making such processes more practically realistic....

  2. Tailoring the properties of magnetite nanoparticles clusters by coating with double inorganic layers

    Science.gov (United States)

    Petran, Anca; Radu, Teodora; Culic, Bogdan; Turcu, Rodica

    2016-12-01

    New magnetic nanoparticles based on Fe3O4 clusters covered with a double layer of inorganic salts/oxides with high magnetization for incorporation in security materials such as security paper were synthesized. For the inorganic layers ZnO, SiO2 and BaSO4 were used. The microstructure and composition of the products were determined by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX) and X-ray photoelectron spectroscopy (XPS). Magnetization measurements on the obtained samples show a straightforward correlation between the saturation magnetization (Ms) and morphology of the samples. The results obtained from color parameter assessment are discussed in relation with the morphology and microstructure of the prepared samples.

  3. Evaluation of molecular dynamics simulation methods for ionic liquid electric double layers

    Science.gov (United States)

    Haskins, Justin B.; Lawson, John W.

    2016-05-01

    We investigate how systematically increasing the accuracy of various molecular dynamics modeling techniques influences the structure and capacitance of ionic liquid electric double layers (EDLs). The techniques probed concern long-range electrostatic interactions, electrode charging (constant charge versus constant potential conditions), and electrolyte polarizability. Our simulations are performed on a quasi-two-dimensional, or slab-like, model capacitor, which is composed of a polarizable ionic liquid electrolyte, [EMIM][BF4], interfaced between two graphite electrodes. To ensure an accurate representation of EDL differential capacitance, we derive new fluctuation formulas that resolve the differential capacitance as a function of electrode charge or electrode potential. The magnitude of differential capacitance shows sensitivity to different long-range electrostatic summation techniques, while the shape of differential capacitance is affected by charging technique and the polarizability of the electrolyte. For long-range summation techniques, errors in magnitude can be mitigated by employing two-dimensional or corrected three dimensional electrostatic summations, which led to electric fields that conform to those of a classical electrostatic parallel plate capacitor. With respect to charging, the changes in shape are a result of ions in the Stern layer (i.e., ions at the electrode surface) having a higher electrostatic affinity to constant potential electrodes than to constant charge electrodes. For electrolyte polarizability, shape changes originate from induced dipoles that soften the interaction of Stern layer ions with the electrode. The softening is traced to ion correlations vertical to the electrode surface that induce dipoles that oppose double layer formation. In general, our analysis indicates an accuracy dependent differential capacitance profile that transitions from the characteristic camel shape with coarser representations to a more diffuse

  4. Chloride adsorption by calcined layered double hydroxides in hardened Portland cement paste

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Seyoon [School of Engineering, Kings College, University of Aberdeen, Aberdeen AB24 3UE (United Kingdom); Moon, Juhyuk, E-mail: juhyuk.moon@stonybrook.edu [Civil Engineering Program, Department of Mechanical Engineering, State University of New York at Stony Brook, New York 11794 (United States); Bae, Sungchul [Department of Civil and Environmental Engineering, University of California, Berkeley, CA 94720 (United States); Duan, Xiaonan [Department of Materials Science and Engineering, Cornell University, Ithaca, NY 14853 (United States); Giannelis, Emmanuel P. [Department of Materials Science and Engineering, Cornell University, Ithaca, NY 14853 (United States); Center for Refining and Petrochemicals, The Research Institute, King Fahd University of Petroleum and Minerals, Dhahran 31261 (Saudi Arabia); Monteiro, Paulo M. [Department of Civil and Environmental Engineering, University of California, Berkeley, CA 94720 (United States)

    2014-06-01

    This study investigated the feasibility of using calcined layered double hydroxides (CLDHs) to prevent chloride-induced deterioration in reinforced concrete. CLDHs not only adsorbed chloride ions in aqueous solution with a memory effect but also had a much higher binding capacity than the original layered double hydroxides (LDHs) in the cement matrix. We investigated this adsorption in hardened cement paste in batch cultures to determine adsorption isotherms. The measured and theoretical binding capacities (153 mg g{sup −1} and 257 mg g{sup −1}, respectively) of the CLDHs were comparable to the theoretical capacity of Friedel's salt (2 mol mol{sup −1} or 121 mg g{sup −1}), which belongs to the LDH family among cementitious phases. We simulated chloride adsorption by CLDHs through the cement matrix using the Fickian model and compared the simulation result to the X-ray fluorescence (XRF) chlorine map. Based on our results, it is proposed that the adsorption process is governed by the chloride transport through the cement matrix; this process differs from that in an aqueous solution. X-ray diffraction (XRD) analysis showed that the CLDH rebuilds the layered structure in a cementitious environment, thereby demonstrating the feasibility of applying CLDHs to the cement and concrete industries. - Highlights: • We examine the adsorption equilibrium and kinetics of CLDH in the hydrated cement. • CLDH capacity to bind chloride ions in the hydrated cement paste is determined. • We model chloride adsorption by CLDH through the cement matrix. • CLDH reforms the layered structure with ion adsorption in the cement matrix.

  5. Layered double hydroxide materials coated carbon electrode: New challenge to future electrochemical power devices

    Science.gov (United States)

    Djebbi, Mohamed Amine; Braiek, Mohamed; Namour, Philippe; Ben Haj Amara, Abdesslem; Jaffrezic-Renault, Nicole

    2016-11-01

    Layered double hydroxides (LDHs) have been widely used in the past years due to their unique physicochemical properties and promising applications in electroanalytical chemistry. The present paper is going to focus exclusively on magnesium-aluminum and zinc-aluminum layered double hydroxides (MgAl & ZnAl LDHs) in order to investigate the property and structure of active cation sites located within the layer structure. The MgAl and ZnAl LDH nanosheets were prepared by the constant pH co-precipitation method and uniformly supported on carbon-based electrode materials to fabricate an LDH electrode. Characterization by powder x-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and transmission electron microscopy revealed the LDH form and well-crystallized materials. Wetting surface properties (hydrophilicity and hydrophobicity) of both prepared LDHs were recorded by contact angle measurement show hydrophilic character and basic property. The electrochemical performance of these hybrid materials was investigated by mainly cyclic voltammetry, electrochemical impedance spectroscopy and chronoamperometry techniques to identify the oxidation/reduction processes at the electrode/electrolyte interface and the effect of the divalent metal cations in total reactivity. The hierarchy of the modified electrode proves that the electronic conductivity of the bulk material is considerably dependent on the divalent cation and affects the limiting parameter of the overall redox process. However, MgAl LDH shows better performance than ZnAl LDH, due to the presence of magnesium cations in the layers. Following the structural, morphological and electrochemical behavior studies of both synthesized LDHs, the prepared LDH modified electrodes were tested through microbial fuel cell configuration, revealing a remarkable, potential new pathway for high-performance and cost-effective electrode use in electrochemical power devices.

  6. Phosphor Dysprosium-Doped Layered Double Hydroxides Exchanged with Different Organic Functional Groups

    Directory of Open Access Journals (Sweden)

    David Ricardo Martínez Vargas

    2013-01-01

    Full Text Available The layers of a Zn/Al layered double hydroxide (LDH were doped with Dy3+ cations. Among some compositions, the Zn2+ : Al3+ : Dy3+ molar ratio equal to 30 : 9 : 1 presented a single crystalline phase. Organic anions with carboxylic, amino, sulfate, or phosphate functional groups were intercalated as single layers between LDH layers as confirmed by X-ray diffraction and infrared spectroscopy. Photoluminescence spectra of the nitrate intercalated LDH showed a wide emission band with strong intensity in the yellow region (around 574 nm, originated due to symmetry distortion of the octahedral coordination in dysprosium centers. Moreover, a broad red band emission was also detected apparently due to the presence of zinc oxide. The distorted symmetry of the dysprosium coordination environment, also confirmed by X-ray photoelectron spectroscopy analysis, was modified after the intercalation with phenyl phosphonate (PP, aspartate (Asp, adipate (Adip, and serinate (Ser anions; the emission as measured from PL spectra of these LDH was more intense in the blue region (ca. 486 nm, thus indicating an increase in symmetry of dysprosium octahedrons. The red emission band from zinc oxide kept the same intensity after intercalation of dodecyl sulfate (DDS. An additional emission of unknown origin at λ = 767 nm was present in all LDHs.

  7. Corrosion behaviors of arc spraying single and double layer coatings in simulated Dagang soil solution

    Institute of Scientific and Technical Information of China (English)

    LIN Bi-lan; LU Xin-ying; LI Long

    2009-01-01

    Three kinds of single layer coatings of Zn,Zn15Al,316L stainless steel and two kinds of double layer coatings with inner layer of Zn or Zn15Al and outer layer of 316L stainless steel by arc spraying were developed to protect the metal ends of prestressed high-strength concrete (PHC) pipe piles against soil corrosion.The corrosion behaviors of the coated Q235 steel samples in the simulated Dagang soil solution were investigated by potentiodynamic polarization,electrochemical impedance spectroscopy (EIS) and natural immersion tests.The results show that the corrosion of the matrix Q235 steel is effectively inhibited by Zn,Zn15Al,Zn+316L and Zn15Al+316L coatings.The corrosion rate value of Zn15Al coated samples is negative.The corrosion products on Zn and Zn15Al coated samples are compact and firm.The corrosion resistance indexes of both Zn and Zn15Al coated samples are improved significantly with corrosion time,and the latter are more outstanding than the former.But the corrosion resistance of 316L coated samples is decreased quickly with the increase in immersion time.When the coatings are sealed with epoxy resin,the corrosion resistance of the coatings will be enhanced significantly.

  8. Dual nutraceutical nanohybrids of folic acid and calcium containing layered double hydroxides

    Science.gov (United States)

    Kim, Tae-Hyun; Oh, Jae-Min

    2016-01-01

    Dual nutraceutical nanohybrids consisting of organic nutrient, folic acid (FA), and mineral nutrient, calcium, were prepared based on layered double hydroxide (LDH) structure. Among various hybridization methods such as coprecipitation, ion exchange, solid phase reaction and exfoliation-reassembly, it was found that exfoliation-reassembly was the most effective in terms of intercalation of FA moiety between Ca-containing LDH layers. X-ray diffraction patterns and infrared spectra indicated that FA molecules were well stabilized in the interlayer space of LDHs through electrostatic interaction. From the atomic force and scanning electron microscopic studies, particle thickness of LDH was determined to be varied with tens, a few and again tens of nanometers in pristine, exfoliated and reassembled state, respectively, while preserving particle diameter. The result confirmed layer-by-layer hybrid structure of FA and LDHs was obtained by exfoliation-reassembly. Solid UV-vis spectra showed 2-dimensional molecular arrangement of FA moiety in hybrid, exhibiting slight red shift in n→π* and π→π* transition. The chemical formulae of FA intercalated Ca-containing LDH were determined to Ca1.30Al(OH)4.6FA0.74·3.33H2O and Ca1.53Fe(OH)5.06FA2.24·9.94H2O by inductively coupled plasma-atomic emission spectroscopy, high performance liquid chromatography and thermogravimetry, showing high nutraceutical content of FA and Ca.

  9. Development and design of double-layer co-injection moulded soy protein based drug delivery devices

    NARCIS (Netherlands)

    Vaz, C.M.; Doeveren, van P.F.N.M.; Reis, R.L.; Cunha, A.M.

    2003-01-01

    Novel double-layer delivery devices based on soy protein derived materials were designed and produced using an innovative two material co-injection moulding technique. It was demonstrated that the viscosity ratio between core and skin layer materials played an important role in the formation of the

  10. Investigation of surface charge density on solid-liquid interfaces by modulating the electrical double layer.

    Science.gov (United States)

    Moon, Jong Kyun; Song, Myung Won; Pak, Hyuk Kyu

    2015-05-20

    A solid surface in contact with water or aqueous solution usually carries specific electric charges. These surface charges attract counter ions from the liquid side. Since the geometry of opposite charge distribution parallel to the solid-liquid interface is similar to that of a capacitor, it is called an electrical double layer capacitor (EDLC). Therefore, there is an electrical potential difference across an EDLC in equilibrium. When a liquid bridge is formed between two conducting plates, the system behaves as two serially connected EDLCs. In this work, we propose a new method for investigating the surface charge density on solid-liquid interfaces. By mechanically modulating the electrical double layers and simultaneously applying a dc bias voltage across the plates, an ac electric current can be generated. By measuring the voltage drop across a load resistor as a function of bias voltage, we can study the surface charge density on solid-liquid interfaces. Our experimental results agree very well with the simple equivalent electrical circuit model proposed here. Furthermore, using this method, one can determine the polarity of the adsorbed state on the solid surface depending on the material used. We expect this method to aid in the study of electrical phenomena on solid-liquid interfaces.

  11. Poisson-Helmholtz-Boltzmann model of the electric double layer: analysis of monovalent ionic mixtures.

    Science.gov (United States)

    Bohinc, Klemen; Shrestha, Ahis; Brumen, Milan; May, Sylvio

    2012-03-01

    In the classical mean-field description of the electric double layer, known as the Poisson-Boltzmann model, ions interact exclusively through their Coulomb potential. Ion specificity can arise through solvent-mediated, nonelectrostatic interactions between ions. We employ the Yukawa pair potential to model the presence of nonelectrostatic interactions. The combination of Yukawa and Coulomb potential on the mean-field level leads to the Poisson-Helmholtz-Boltzmann model, which employs two auxiliary potentials: one electrostatic and the other nonelectrostatic. In the present work we apply the Poisson-Helmholtz-Boltzmann model to ionic mixtures, consisting of monovalent cations and anions that exhibit different Yukawa interaction strengths. As a specific example we consider a single charged surface in contact with a symmetric monovalent electrolyte. From the minimization of the mean-field free energy we derive the Poisson-Boltzmann and Helmholtz-Boltzmann equations. These nonlinear equations can be solved analytically in the weak perturbation limit. This together with numerical solutions in the nonlinear regime suggests an intricate interplay between electrostatic and nonelectrostatic interactions. The structure and free energy of the electric double layer depends sensitively on the Yukawa interaction strengths between the different ion types and on the nonelectrostatic interactions of the mobile ions with the surface.

  12. Organo-layered double hydroxides composite thin films deposited by laser techniques

    Energy Technology Data Exchange (ETDEWEB)

    Birjega, R. [National Institute for Lasers, Plasma and Radiation Physics, 409 Atomistilor Str., 77125 Bucharest-Magurele (Romania); Vlad, A., E-mail: angela.vlad@gmail.com [National Institute for Lasers, Plasma and Radiation Physics, 409 Atomistilor Str., 77125 Bucharest-Magurele (Romania); Matei, A.; Dumitru, M.; Stokker-Cheregi, F.; Dinescu, M. [National Institute for Lasers, Plasma and Radiation Physics, 409 Atomistilor Str., 77125 Bucharest-Magurele (Romania); Zavoianu, R. [University of Bucharest, Faculty of Chemistry, Department of Chemical Technology and Catalysis, 4-12 Regina Elisabeta Bd., Bucharest 030018 (Romania); Raditoiu, V.; Corobea, M.C. [National R.& D. Institute for Chemistry and Petrochemistry, ICECHIM, 202 Splaiul Independentei Str., CP-35-274, 060021 Bucharest (Romania)

    2016-06-30

    Highlights: • PLD and MAPLE was successfully used to produce organo-layered double hydroxides. • The organic anions (dodecyl sulfate-DS) were intercalated in co-precipitation step. • Zn2.5Al-LDH (Zn/Al = 2.5) and Zn2.5Al-DS thin films obtained in this work could be suitable for further applications as hydrophobic surfaces. - Abstract: We used laser techniques to create hydrophobic thin films of layered double hydroxides (LDHs) and organo-modified LDHs. A LDH based on Zn-Al with Zn{sup 2+}/Al{sup 3+} ratio of 2.5 was used as host material, while dodecyl sulfate (DS), which is an organic surfactant, acted as guest material. Pulsed laser deposition (PLD) and matrix assisted pulsed laser evaporation (MAPLE) were employed for the growth of the films. The organic anions were intercalated in co-precipitation step. The powders were subsequently used either as materials for MAPLE, or they were pressed and used as targets for PLD. The surface topography of the thin films was investigated by atomic force microscopy (AFM), the crystallographic structure of the powders and films was checked by X-ray diffraction. FTIR spectroscopy was used to evidence DS interlayer intercalation, both for powders and the derived films. Contact angle measurements were performed in order to establish the wettability properties of the as-prepared thin films, in view of functionalization applications as hydrophobic surfaces, owing to the effect of DS intercalation.

  13. Sandwich-like graphene/polypyrrole/layered double hydroxide nanowires for high-performance supercapacitors

    Science.gov (United States)

    Li, Xuejin; Zhang, Yu; Xing, Wei; Li, Li; Xue, Qingzhong; Yan, Zifeng

    2016-11-01

    Electrode design in nanoscale is considered to be ultra-important to construct a superb capacitor. Herein, a sandwich-like composite was made by combining graphene/polypyrrole (GPPY) with nickel-aluminum layered double hydroxide nanowires (NiAl-NWs) via a facile hydrothermal method. This sandwich-like architecture is promising in energy storage applications due to three unique features: (1) the conductive GPPY substrate not only effectively prevents the layered double hydroxides species from aggregating, but also considerably facilitates the electron transmission; (2) the ultrathin NiAl-NWs ensure a maximum exposure of active Ni2+, which can improve the efficiency of rapid redox reactions even at high current densities; (3) the sufficient space between anisotropic NiAl-NWs can accommodate a large volume change of the nanowires to avoid their collapse or distortion during the reduplicative redox reactions. Keeping all these unique features in mind, when the as-prepared composite was applied to supercapacitors, it presented an enhanced capacitive performance in terms of high specific capacitance (845 F g-1), excellent rate performance (67% retained at 30 A g-1), remarkable cyclic stability (92% maintained after 5000 cycles) and large energy density (40.1 Wh·Kg-1). This accomplishment in the present work inspires an innovative strategy of nanoscale electrode design for high-rate performance supercapacitor electrodes containing pseuducapacitive metal oxide.

  14. Preparation, characterization and dye adsorption of Au nanoparticles/ZnAl layered double oxides nanocomposites

    Science.gov (United States)

    Zhang, Yu Xin; Hao, Xiao Dong; Kuang, Min; Zhao, Han; Wen, Zhong Quan

    2013-10-01

    In this work, Au/ZnAl-layer double oxides (LDO) nanocomposties were prepared through a facile calcination process of AuCl4- intercalated ZnAl-layered double hydroxides (LDHs) nanocomposites. The morphology and crystal structure of these nanocomposites were characterized by Scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), and N2 sorption analysis. By tailoring the process parameter, such as calcination temperature, heating time and the component composition, the adsorption properties of methyl orange (MO) on the Au/ZnAl-LDO nanocomposites were investigated in this work. In a typical adsorption process, it was found that 0.985 mg of MO (0.01 g L-1, 100 mL, 1 mg of MO in total) can be removed in 60 min by utilizing only 2.5 mg of Au/ZnAl-LDO (Au content, 1%) as adsorbents. Our adsorption data obtained from the Langmuir model also gave good values of the determination coefficient, and the saturated adsorption capacity of Au/ZnAl-LDO nanocomposites for MO was found to be 627.51 mg/g under ambient condition (e.g., room temperature, 1 atm). In principle, these hybrid nanostructures with higher adsorption abilities could be very promising adsorbents for wastewater treatment.

  15. Surface-charging behavior of Zn-Cr layered double hydroxide.

    Science.gov (United States)

    Rojas Delgado, R; Arandigoyen Vidaurre, M; De Pauli, C P; Ulibarri, M A; Avena, M J

    2004-12-15

    A Zn-Cr layered double hydroxide (LDH) having the formula Zn(2)Cr(OH)(6)Cl(0.7)(CO(3))(0.15)2.1H(2)O was synthesized and characterized by powder X-ray diffraction, infrared spectroscopy, acid-base potentiometric titration, mass titration, electrophoretic mobility, and modeling of the electrical double layer. Adsorption of alizarin was also performed in order to show some particular features of the HDL. Net hydroxyl adsorption, which increases with increasing pH and decreasing supporting electrolyte concentration, takes place above pH 5. The electrophoretic mobility of the particles was always positive and it decreased when the pH was higher than 9. An isoelectric point of 12 could be estimated by extrapolating the data. The modified MUSIC model was used to estimate deprotonation constants of surface groups and different adsorption models were compared. Good fit of hydroxyl adsorption and electrophoresis could be achieved by considering both OH(-)/Cl(-) exchange at structural sites and proton desorption from surface hydroxyl groups. The modeling, in agreement with alizarin adsorption, indicates that most of the structural positive charge of the LDH is screened at the surface by exchanged anions and negatively charged surface groups. It also suggests that only structural charge sites initially neutralized by chloride ions are active for anion exchange. The remaining sites are blocked by carbonate and do not participate in the exchange.

  16. Nonlinear electron acoustic structures generated on the high-potential side of a double layer

    Directory of Open Access Journals (Sweden)

    R. Pottelette

    2009-04-01

    Full Text Available High-time resolution measurements of the electron distribution function performed in the auroral upward current region reveals a large asymmetry between the low- and high-potential sides of a double-layer. The latter side is characterized by a large enhancement of a locally trapped electron population which corresponds to a significant part (~up to 30% of the total electron density. As compared to the background hot electron population, this trapped component has a very cold temperature in the direction parallel to the static magnetic field. Accordingly, the differential drift between the trapped and background hot electron populations generates high frequency electron acoustic waves in a direction quasi-parallel to the magnetic field. The density of the trapped electron population can be deduced from the frequency where the electron acoustic spectrum maximizes. In the auroral midcavity region, the electron acoustic waves may be modulated by an additional turbulence generated in the ion acoustic range thanks to the presence of a pre-accelerated ion beam located on the high-potential side of the double layer. Electron holes characterized by bipolar pulses in the electric field are sometimes detected in correlation with these electron acoustic wave packets.

  17. Strong Deformation of the Thick Electric Double Layer around a Charged Particle during Sedimentation or Electrophoresis.

    Science.gov (United States)

    Khair, Aditya S

    2017-08-15

    The deformation of the electric double layer around a charged colloidal particle during sedimentation or electrophoresis in a binary, symmetric electrolyte is studied. The surface potential of the particle is assumed to be small compared to the thermal voltage scale. Additionally, the Debye length is assumed to be large compared to the particle size. These assumptions enable a linearization of the electrokinetic equations. The particle appears as a point charge in this thick-double-layer limit; the distribution of charge in the diffuse cloud surrounding it is determined by a balance of advection due to the particle motion, Brownian diffusion of ions, and electrostatic screening of the particle by the cloud. The ability of advection to deform the charge cloud from its equilibrium state is parametrized by a Péclet number, Pe. For weak advection (Pe ≪ 1), the cloud is only slightly deformed. In contrast, the cloud can be completely stripped from the particle at Pe ≫ 1; consequently, electrokinetic effects on the particle motion vanish in this regime. Therefore, in sedimentation the drag limits to Stokes' law for an uncharged particle as Pe → ∞. Likewise, the particle velocity for electrophoresis approaches Huckel's result. The strongly deformed cloud at large Pe is predicted to generate a concomitant increase in the sedimentation field in a dilute settling suspension.

  18. Double layered hydroxides as potential anti-cancer drug delivery agents.

    Science.gov (United States)

    Riaz, Ufana; Ashraf, S M

    2013-04-01

    The emergence of nanotechnology has changed the scenario of the medical world by revolutionizing the diagnosis, monitoring and treatment of cancer. This nanotechnology has been proved miraculous in detecting cancer cells, delivering chemotherapeutic agents and monitoring treatment from non-specific to highly targeted killing of tumor cells. In the past few decades, a number of inorganic materials have been investigated such as calcium phosphate, gold, carbon materials, silicon oxide, iron oxide, and layered double hydroxide (LDH) for examining their efficacy in targeting drug delivery. The reason behind the selection of these inorganic materials was their versatile and unique features efficient in drug delivery, such as wide availability, rich surface functionality, good biocompatibility, potential for target delivery, and controlled release of the drug from these inorganic nanomaterials. Although, the drug-LDH hybrids are found to be quite instrumental because of their application as advanced anti-cancer drug delivery systems, there has not been much research on them. This mini review is set to highlight the advancement made in the use of layered double hydroxides (LDHs) as anti-cancer drug delivery agents. Along with the advantages of LDHs as anti-cancer drug delivery agents, the process of interaction of some of the common anti-cancer drugs with LDH has also been discussed.

  19. Analytical solution of electrohydrodynamic flow and transport in rectangular channels: inclusion of double layer effects

    KAUST Repository

    Joekar-Niasar, V.

    2013-01-25

    Upscaling electroosmosis in porous media is a challenge due to the complexity and scale-dependent nonlinearities of this coupled phenomenon. "Pore-network modeling" for upscaling electroosmosis from pore scale to Darcy scale can be considered as a promising approach. However, this method requires analytical solutions for flow and transport at pore scale. This study concentrates on the development of analytical solutions of flow and transport in a single rectangular channel under combined effects of electrohydrodynamic forces. These relations will be used in future works for pore-network modeling. The analytical solutions are valid for all regimes of overlapping electrical double layers and have the potential to be extended to nonlinear Boltzmann distribution. The innovative aspects of this study are (a) contribution of overlapping of electrical double layers to the Stokes flow as well as Nernst-Planck transport has been carefully included in the analytical solutions. (b) All important transport mechanisms including advection, diffusion, and electromigration have been included in the analytical solutions. (c) Fully algebraic relations developed in this study can be easily employed to upscale electroosmosis to Darcy scale using pore-network modeling. © 2013 Springer Science+Business Media Dordrecht.

  20. A study of thermally activated Mg–Fe layered double hydroxides as potential environmental catalysts

    Directory of Open Access Journals (Sweden)

    MILICA S. HADNAĐEV-KOSTIĆ

    2010-09-01

    Full Text Available Layered double hydroxides (LDHs and mixed oxides derived after thermal decomposition of LDHs with different Mg–Fe contents were investigated. These materials were chosen because of the possibility to tailor their various properties, such as ion-exchange capability, redox and acid–base and surface area. Layered double hydroxides, [Mg1-xFex(OH2](CO3x/2×mH2O (where x presents the content of trivalent ions, x = M(III/(M(II + M(III were synthesized using the low supersaturation precipitation method. The influence of different Mg/Fe ratios on the structure and surface properties of the LDH and derived mixed oxides was investigated in correlation to their catalytic properties in the chosen test reaction (Fischer–Tropsch synthesis. It was determined that the presence of active sites in the mixed oxides is influenced by the structural properties of the initial LDH and by the presence of additional Fe phases. Furthermore, a synthesis outside the optimal range for the synthesis of single phase LDHs leads to the formation of metastable, multiphase systems with specific characteristics and active sites.

  1. Relation between the ion size and pore size for an electric double-layer capacitor.

    Science.gov (United States)

    Largeot, Celine; Portet, Cristelle; Chmiola, John; Taberna, Pierre-Louis; Gogotsi, Yury; Simon, Patrice

    2008-03-05

    The research on electrochemical double layer capacitors (EDLC), also known as supercapacitors or ultracapacitors, is quickly expanding because their power delivery performance fills the gap between dielectric capacitors and traditional batteries. However, many fundamental questions, such as the relations between the pore size of carbon electrodes, ion size of the electrolyte, and the capacitance have not yet been fully answered. We show that the pore size leading to the maximum double-layer capacitance of a TiC-derived carbon electrode in a solvent-free ethyl-methylimmidazolium-bis(trifluoro-methane-sulfonyl)imide (EMI-TFSI) ionic liquid is roughly equal to the ion size (approximately 0.7 nm). The capacitance values of TiC-CDC produced at 500 degrees C are more than 160 F/g and 85 F/cm(3) at 60 degrees C, while standard activated carbons with larger pores and a broader pore size distribution present capacitance values lower than 100 F/g and 50 F/cm(3) in ionic liquids. A significant drop in capacitance has been observed in pores that were larger or smaller than the ion size by just an angstrom, suggesting that the pore size must be tuned with sub-angstrom accuracy when selecting a carbon/ion couple. This work suggests a general approach to EDLC design leading to the maximum energy density, which has been now proved for both solvated organic salts and solvent-free liquid electrolytes.

  2. Preparation and properties of blends composed of lignosulfonated layered double hydroxide/plasticized starch and thermoplastics.

    Science.gov (United States)

    Privas, Edwige; Leroux, Fabrice; Navard, Patrick

    2013-07-01

    Layered double hydroxide prepared with lignosulfonate (LDH/LS) can be easily dispersed down to the nanometric scale in thermoplastic starch, at concentration of 1 up to 4 wt% of LDH/LS. They can thus be used as a bio-based reinforcing agent of thermoplastic starch. Incorporation of LDH/LS in starch must be done using LDH/LS slurry instead of powder on order to avoid secondary particles aggregation, the water of the paste being used as the starch plasticizer. This reinforced starch was used for preparing a starch-polyolefine composite. LDH/LS-starch nanocomposites were mixed in a random terpolymer of ethylene, butyl acrylate (6%) and maleic anhydride (3%) at concentrations of 20 wt% and 40 wt%. With a 20% loading of (1 wt% LDH/LS in thermoplastic starch), the ternary copolymer is partially bio-based while keeping nearly its original processability and mechanical properties and improving oxygen barrier properties. The use of layered double hydroxides is also removing most odours linked to the lignin phase.

  3. Organo/layered double hydroxide nanohybrids used to remove non ionic pesticides.

    Science.gov (United States)

    Chaara, D; Bruna, F; Ulibarri, M A; Draoui, K; Barriga, C; Pavlovic, I

    2011-11-30

    The preparation and characterization of organo/layered double hydroxide nanohybrids with dodecylsulfate and sebacate as interlayer anion were studied in detail. The aim of the modification of the layered double hydroxides (LDHs) was to change the hydrophilic character of the interlayer to hydrophobic to improve the ability of the nanohybrids to adsorb non-ionic pesticides such as alachlor and metolachlor from water. Adsorption tests were conducted on organo/LDHs using variable pH values, contact times and initial pesticide concentrations (adsorption isotherms) in order to identify the optimum conditions for the intended purpose. Adsorbents and adsorption products were characterized several physicochemical techniques. The adsorption test showed that a noticeable increase of the adsorption of the non-ionic herbicides was produced. Based on the results, the organo/LDHs could be good adsorbents to remove alachlor and metolachlor from water. Different organo/LDHs complexes were prepared by a mechanical mixture and by adsorption. The results show that HTSEB-based complex displays controlled release properties that reduce metolachlor leaching in soil columns compared to a technical product and the other formulations. The release was dependent on the nature of the adsorbent used to prepare the complexes. Thus, it can be concluded that organo/LDHs might act as suitable supports for the design of pesticide slow release formulations with the aim of reducing the adverse effects derived from rapid transport losses of the chemical once applied to soils.

  4. Optical Tagging of Ion Beams Accelerated by Double Layers in Laboratory Plasma

    Science.gov (United States)

    Good, Timothy; Aguirre, Evan; Thompson, Derek; Scime, Earl

    2016-10-01

    Experiments in helicon sources that investigate plasma expansion into weakly magnetized, low density regions reveal the production of supersonic ion beams attributed to acceleration by spatially localized double layer structures. Current efforts are aimed at mapping the ion velocity flow field utilizing 2D spatially scanning laser induced fluorescence (LIF) probes that yield metastable ion velocity distribution functions (IVDF) for velocities along and perpendicular to the flow. Observation of metastable ion beams by LIF renders plausible a Lagrangian approach to studying the field-ion interaction via optical tagging. We propose a tagging scheme in which metastable state ion populations are modulated by optical pumping upstream of the double layer and the synchronous detection of LIF at the ion beam velocity is recorded downstream. Besides the unambiguous identification of the source of beam ions, this method can provide detailed dynamical information through time of flight analysis. Preliminary results will be presented. Please include this poster in session that includes poster authored by Evan Aguirre et al.

  5. Efficient drug delivery using SiO2-layered double hydroxide nanocomposites.

    Science.gov (United States)

    Li, Li; Gu, Zi; Gu, Wenyi; Liu, Jian; Xu, Zhi Ping

    2016-05-15

    MgAl-layered double hydroxide (MgAl-LDH) nanoparticles have great potentials in drug and siRNA delivery. In this work, we used a nanodot-coating strategy to prepare SiO2 dot-coated layered double hydroxide (SiO2@MgAl-LDH) nanocomposites with good dispersibility and controllable size for drug delivery. The optimal SiO2@MgAl-LDH nanocomposite was obtained by adjusting synthetic parameters including the mass ratio of MgAl-LDH to SiO2, the mixing temperature and time. The optimal SiO2@MgAl-LDH nanocomposite was shown to have SiO2 nanodots (10-15nm in diameter) evenly deposited on the surface of MgAl-LDHs (110nm in diameter) with the plate-like morphology and the average hydrodynamic diameter of 170nm. We further employed SiO2@MgAl-LDH nanocomposite as a nanocarrier to deliver methotrexate (MTX), a chemotherapy drug, to the human osteosarcoma cell (U2OS) and found that MTX delivered by SiO2@MgAl-LDH nanocomposite apparently inhibited the U2OS cell growth.

  6. Fabrication and characterization of short-period double-layer cross-grating with holographic lithography

    Science.gov (United States)

    Lin, Cunbao; Yan, Shuhua; You, Fusheng

    2017-01-01

    A cross-grating with short period and double layer is designed, and a method combining holographic lithography and lithography-etch-lithography-etch is proposed to manufacture it. The scalar diffraction theory and the rigorous coupled wave analysis are employed to analyze the diffraction characteristics of the double-layer cross-grating (DLCG). It reveals that the efficiencies of the (±1,±1) orders possess perfect complementarity under normal incidence. The equivalent high efficiency for TE and TM polarization can be realized which means the high signal-to-noise ratio and fringe contrast can be simultaneously achieved for heterodyne grating interferometers (HGIs). Furthermore, a gold-coated DLCG with grating pitch of 2 μm and pattern area of 60 mm×60 mm etched on the quartz substrate is fabricated with the proposed method. The displacement resolution, measurement range and long-term stability can be reliably guaranteed for HGIs with this grating. The characteristics of the DLCG are also experimentally tested and compared with the theoretical analysis. Reasonable consistency is obtained and the capabilities of both the DLCG and the fabrication method are verified.

  7. Investigation of thermally stimulated properties of SHI beam irradiated polycarbonate/polystyrene double layered samples

    Science.gov (United States)

    Rathore, Bhupendra Singh; Gaur, Mulayam Singh; Singh, Kripa Shanker

    2011-12-01

    The double layered samples of polycarbonate/polystyrene (PC/PS) have been prepared by solvent casting method and irradiated with 55 MeV C 5+ beam at different ion fluences range from 1 × 10 11 to 1 × 10 13 ion/cm 2. The effect of swift heavy ion (SHI) beam in interfacial phenomena, phase change, dielectric relaxation, degradation temperature, stability, charge storage and transport mechanism of PC/PS pristine and irradiated double layered samples have been investigated by thermally stimulated discharge current (TSDC), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). TSDC show α, β-relaxation peaks shifted to the lower temperatures side with increase of fluence. The activation energy and relaxation time decrease, while the depolarization current and charge released increase with increase in the ion fluences. DSC curve show the glass transition temperature ( T g) and heat capacity decreases with increase in the ion fluences. The TGA characteristics represent the thermal stability, which is found to be decreased with increase in the ion fluences.

  8. Thermal characteristics of double-layer thin film target ablated by femtosecond laser pulses

    Institute of Scientific and Technical Information of China (English)

    Gao Xun; Song Xiao-Wei; Lin Jing-Quan

    2011-01-01

    Thermal characteristics of tightly-contacted copper-gold double-layer thin film target under ablation of femtosecond laser pulses are investigated by using a two-temperature theoretical model. Numerical simulation shows that electron heat flux varies significantly on the boundary of copper-gold film with different maximal electron temperature of 1.15 × 103 K at 5 ps after ablating laser pulse in gold and copper films, which can reach a balance around 12.6 ps and 8.2 ps for a single and double pulse ablation, respectively, and in the meantime, the lattice temperature difference crossing the gold-copper interface is only about 0.04 × 103 K at the same time scale. It is also found that electron-lattice heat relaxation time increases linearly with laser fluence in both single and double pulse ablation, and a sudden change of the relaxation time appears after the laser energy density exceeds the ablation threshold.

  9. Studies on the Properties of Organic Photovoltaic Cells Using TiOx and DMDCNQI as Double Buffer Layers.

    Science.gov (United States)

    Kim, Gyu Min; Han, Seong Hun; Oh, Se Young

    2015-02-01

    Various types of n-type buffer layers have been used in organic electronic devices. These buffer layers turned out to expedite carrier injection and reduce series resistance, leading to good performance of organic electronic devices. In our current work, we have fabricated organic photovoltaic (OPV) cells consisting of ITO/PEDOT:PSS/P3HT:PCBM/TiOx/DMDCNQI/AI which were fabricated in the presence of air. To incorporate the individual advantages of each n-type buffer layer, a DMDCNQI and TiOx layers were inserted to act as n-type double buffer layers. This leads to an increase of short-circuit current (JSC) and fill factor (FF) with good stability, in comparison to P3HT:PCBM based conventional cells. The results imply that the structures of double buffer layers can provide possible alternative to achieving high performance and air durability.

  10. Determination of effective mechanical properties of a double-layer beam by means of a nano-electromechanical transducer

    Energy Technology Data Exchange (ETDEWEB)

    Hocke, Fredrik; Pernpeintner, Matthias; Gross, Rudolf, E-mail: rudolf.gross@wmi.badw.de [Walther-Meißner-Institut, Bayerische Akademie der Wissenschaften, D-85748 Garching (Germany); Nanosystems Initiative Munich, D-80799 München (Germany); Physik-Department, Technische Universität München, D-85748 Garching (Germany); Zhou, Xiaoqing; Kippenberg, Tobias J. [École Polytechnique Fédérale de Lausanne, CH-1015 Lausanne (Switzerland); Schliesser, Albert [École Polytechnique Fédérale de Lausanne, CH-1015 Lausanne (Switzerland); Niels Bohr Institute, University of Copenhagen, DK-2100 Copenhagen (Denmark); Huebl, Hans, E-mail: hans.huebl@wmi.badw.de [Walther-Meißner-Institut, Bayerische Akademie der Wissenschaften, D-85748 Garching (Germany); Nanosystems Initiative Munich, D-80799 München (Germany)

    2014-09-29

    We investigate the mechanical properties of a doubly clamped, double-layer nanobeam embedded into an electromechanical system. The nanobeam consists of a highly pre-stressed silicon nitride and a superconducting niobium layer. By measuring the mechanical displacement spectral density both in the linear and the nonlinear Duffing regime, we determine the pre-stress and the effective Young's modulus of the nanobeam. An analytical double-layer model quantitatively corroborates the measured values. This suggests that this model can be used to design mechanical multilayer systems for electro- and optomechanical devices, including materials controllable by external parameters such as piezoelectric, magnetostrictive, or in more general multiferroic materials.

  11. Synthesis of mesoporous silica@Co-Al layered double hydroxide spheres: layer-by-layer method and their effects on the flame retardancy of epoxy resins.

    Science.gov (United States)

    Jiang, Shu-Dong; Bai, Zhi-Man; Tang, Gang; Song, Lei; Stec, Anna A; Hull, T Richard; Hu, Yuan; Hu, Wei-Zhao

    2014-08-27

    Hierarchical mesoporous silica@Co-Al layered double hydroxide (m-SiO2@Co-Al LDH) spheres were prepared through a layer-by-layer assembly process, in order to integrate their excellent physical and chemical functionalities. TEM results depicted that, due to the electrostatic potential difference between m-SiO2 and Co-Al LDH, the synthetic m-SiO2@Co-Al LDH hybrids exhibited that m-SiO2 spheres were packaged by the Co-Al LDH nanosheets. Subsequently, the m-SiO2@Co-Al LDH spheres were incorporated into epoxy resin (EP) to prepare specimens for investigation of their flame-retardant performance. Cone results indicated that m-SiO2@Co-Al LDH incorporated obviously improved fire retardant of EP. A plausible mechanism of fire retardant was hypothesized based on the analyses of thermal conductivity, char residues, and pyrolysis fragments. Labyrinth effect of m-SiO2 and formation of graphitized carbon char catalyzed by Co-Al LDH play pivotal roles in the flame retardance enhancement.

  12. Layered Double Hydroxide Assemblies with Controllable Drug Loading Capacity and Release Behavior as well as Stabilized Layer-by-Layer Polymer Multilayers.

    Science.gov (United States)

    Lv, Fengzhu; Xu, Linan; Zhang, Yihe; Meng, Zilin

    2015-09-02

    A stable drug release system with magnetic targeting is essential in a drug delivery system. In the present work, layered double hydroxide assemblies stabilized by layer-by-layer polymer multilayers were prepared by alternative deposition of poly(allylamine hydrochloride) and poly(acrylic acid) species on composite particles of Fe3O4 and ZnAl-LDH and then covalent cross-linkage of the polymer multilayers by photosensitive cross-linker. The successful fabrication was recorded by Zeta potential and Fourier transform infrared spectrum measurements. The formed assemblies were stable in high pH solutions (pH > 7). The drug loading capacity and release behavior of the assemblies could be controlled by treatment with appropriate acidic solution, and were confirmed by loading and release of a simulated drug, methylene blue. The formed assemblies possessed enough saturated magnetic strength and were sensitive to external magnetic field which was essential for targeting drug delivery. The formed assemblies were multifunctional assemblies with great potential as drug delivery system.

  13. Layer-by-layer assembled multilayer films of exfoliated layered double hydroxide and carboxymethyl-β-cyclodextrin for selective capacitive sensing of acephatemet.

    Science.gov (United States)

    Gong, Jingming; Han, Xinmei; Zhu, Xiaolei; Guan, Zhangqiong

    2014-11-15

    Novel organic-inorganic hybrid ultrathin films were fabricated by alternate assembly of cationic exfoliated Mg-Al-layered double hydroxide (LDH) nanosheets and carboxymethyl-β-cyclodextrin (CMCD) as a polyanion onto a glassy carbon electrode (GCE) via a layer-by-layer (LBL) approach. The multilayer films were then characterized by means of X-ray powder diffraction (XRD), infrared spectroscopy (IR), and scanning electron microscopy (SEM). These films were found to possess a long range stacking order in the normal direction of the substrate with a continuous and uniform morphology. Its electrochemical performance was systematically investigated. Our results demonstrate that such a newly designed (LDH/CMCD)n multilayer film, combining the individual properties of CMCD (a high supramolecule recognition and enrichment capability) together with LDH nanosheets (a rigid inorganic matrix), can be applied to a sensitive, simple, and label-free capacitive detection of acephatemet (AM). Molecular docking calculations further disclose that the selective sensing behavior toward AM may be attributed to the specific binding ability of CMCD to AM. Under the optimized conditions, the capacitive change of AM was proportional to its concentration ranging from 0.001 to 0.10 μg mL(-1) and 0.1 to 0.8 μg mL(-1) with a detection limit 0.6 ng mL(-1) (S/N=3). Toward the goal for practical applications, this simple probe was further evaluated by monitoring AM in real samples.

  14. Preparation and inhibition properties of molybdate intercalated ZnAlCe layered double hydroxide

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Huajie; Wang, Jihui, E-mail: jhwang@tju.edu.cn; Zhang, Yu; Hu, Wenbin

    2016-09-05

    ZnAlCe layered double hydroxide intercalated by molybdate (ZnAlCe−MoO{sub 4} LDH) was successfully synthesized by using co-precipitation method, and the morphology, structure of ZnAlCe−MoO{sub 4} LDH were observed and characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) techniques. The inhibition behavior of ZnAlCe−MoO{sub 4} LDH for Q235 steel in 3.5%NaCl solution was determined by polarization curves, electrochemical impedance spectroscopy (EIS), inductively coupled plasma mass spectrometer (ICP-MS) and X-ray photoelectron spectrometer (XPS) methods. The results shows that the synthesized ZnAlCe−MoO{sub 4} LDH has a lamellar structure with a particle size of 0.1–2.0 μm, an average thickness of 30 nm, and a basal plane spacing of 0.898 nm. Compared with the addition of ZnAl layered double hydroxide intercalated by nitrate (ZnAl−NO{sub 3} LDH) and ZnAl layered double hydroxide intercalated by molybdate (ZnAl−MoO{sub 4} LDH) in 3.5% NaCl solution, Q235 steel in 3.5%NaCl + ZnAlCe−MoO{sub 4} LDH solution has a lower corrosion current density, larger polarization resistance and a higher inhibition efficiency. The addition of ZnAlCe−MoO{sub 4} LDH will reduce the chloride concentration in 3.5% NaCl solution by the anion exchanged with molybdate, and improve the corrosion resistance of Q235 steel owing to the formation of passive film with the composition of ferrous or iron molybdate and deposition film with zinc and cerium hydroxides. - Highlights: • ZnAlCe−MoO{sub 4} LDH compound was successfully synthesized by co-precipitation method. • ZnAlCe−MoO{sub 4} LDH has a better inhibition effect to Q235 steel in 3.5%NaCl solution. • The Cl{sup −} ions in solution was partially exchanged with MoO{sub 4}{sup 2−} ions in host layers. • The passive film and deposition film were formed by the release of LDH compound.

  15. Self-consistent electrostatic simulations of reforming double layers in the downward current region of the aurora

    Energy Technology Data Exchange (ETDEWEB)

    Gunell, H.; Keyser, J. de [Belgian Institute for Space Aeronomy, Brussels (Belgium); Andersson, L. [Colorado Univ., Boulder, CO (United States). Lab. for Atmospheric and Space Physics; Mann, I. [EISCAT Scientific Association, Kiruna (Sweden); Umeaa Univ. (Sweden). Dept. of Physics

    2015-07-01

    The plasma on a magnetic field line in the downward current region of the aurora is simulated using a Vlasov model. It is found that an electric field parallel to the magnetic fields is supported by a double layer moving toward higher altitude. The double layer accelerates electrons upward, and these electrons give rise to plasma waves and electron phase-space holes through beam-plasma interaction. The double layer is disrupted when reaching altitudes of 1- 2 Earth radii where the Langmuir condition no longer can be satisfied due to the diminishing density of electrons coming up from the ionosphere. During the disruption the potential drop is in part carried by the electron holes. The disruption creates favourable conditions for double layer formation near the ionosphere and double layers form anew in that region. The process repeats itself with a period of approximately 1 min. This period is determined by how far the double layer can reach before being disrupted: a higher disruption altitude corresponds to a longer repetition period. The disruption altitude is, in turn, found to increase with ionospheric density and to decrease with total voltage. The current displays oscillations around a mean value. The period of the oscillations is the same as the recurrence period of the double layer formations. The oscillation amplitude increases with increasing voltage, whereas the mean value of the current is independent of voltage in the 100 to 800V range covered by our simulations. Instead, the mean value of the current is determined by the electron density at the ionospheric boundary.

  16. Investigation of a double barrier resonant tunnelling structure which incorporates an optical window layer in the top contact

    Energy Technology Data Exchange (ETDEWEB)

    Henini, M.; Eaves, L.; Maude, D.K.; Hughes, O.H. (Dept. of Physics, Univ. of Nottingham (UK)); White, C.R.H. (Dept. of Physics, Univ. of Nottingham (UK) RSRE, Great Malvern (UK)); Simmonds, P.E. (Royal Signals and Radar Establishment, Great Malvern (UK) Dept. of Physics, Univ. of Nottingham (UK)); Skolnick, M.S. (Royal Signals and Radar Establishment, Great Malvern (UK)); Portal, J.C. (SNCI-CNRS, 38 - Grenoble (France) LPS-INSA, 31 - Toulouse (France))

    1991-05-01

    The electrical and optical properties of a double barrier resonant tunnelling device based on n-GaAs/(AlGa)As and incorporating a heavily doped (AlGa)As window layer are described. The window layer is located between the quantum well and the top surface and has a band gap which exceeds the energy of the quantum well photoluminescence. The incorporation of this layer does not impair the electrical properties of the device. (orig.).

  17. Electric double layer at the interface of ionic liquid-dielectric liquid under electric field.

    Science.gov (United States)

    Lee, D W; Im, D J; Kang, I S

    2013-02-12

    The structure of the electric double layer (EDL) is analyzed in order to understand the electromechanical behavior of the interface of ionic liquid-dielectric liquid. The modified Poisson-Boltzmann equation proposed by Bazant et al. is solved to see the crowding and the overscreening effects that are the characteristics of an ionic liquid (Bazant, M. Z.; Storey, B. D.; Kornyshev, A. A. Double layer in ionic liquids: Overscreening versus crowding. Phys. Rev. Lett. 2011, 106, 046102.). From the simple one-dimensional (1-D) analysis, it is found that the changes of the composition and the material properties in the EDL are negligible except under some extreme conditions such as strong electric field over O(10(8)) V/m. From the electromechanical view points, an ionic liquid behaves like a pure conductor at the interface with a dielectric liquid. Based on these findings, three specific application problems are considered. In the first, a new method is suggested for measuring the interfacial tension of an ionic liquid-dielectric liquid system. The deformation of a charged ionic liquid droplet translating between two electrodes is used for this measurement. The second is for the Taylor cone problem, which includes an extreme electric field condition near the tip. The size of the critical region, where the EDL effect should be considered, is estimated by using the 1-D analysis result. Numerical computation is also performed to see the profiles of electric potential and the electric stress along the interface of the Taylor cone. Lastly, the electrowetting problem of the ionic liquid is considered. The discrepancies in the results of previous workers are interpreted by using the results of the present work. It is shown that all the results might be consistent if the leaking of the dielectric layer and/or the adsorption of ions is considered.

  18. The in vitro sustained release profile and antitumor effect of etoposide-layered double hydroxide nanohybrids

    Directory of Open Access Journals (Sweden)

    Qin LL

    2013-05-01

    Full Text Available Lili Qin,1 Mei Wang,2 Rongrong Zhu,3 Songhui You,1 Ping Zhou,1 Shilong Wang31Department of Physical Education, Tongji University, Shanghai, People's Republic of China; 2Department of Chemistry, Tongji University, Shanghai, People's Republic of China; 3School of Life Science and Technology, Tongji University, Shanghai, People's Republic of ChinaAbstract: Magnesium-aluminum layered double hydroxides intercalated with antitumor drug etoposide (VP16 were prepared for the first time using a two-step procedure. The X-ray powder diffraction data suggested the intercalation of VP16 into layers with the increased basal spacing from 0.84–1.18 nm was successful. Then, it was characterized by X-ray powder diffraction, Fourier transform infrared spectroscopy, thermogravimetry and differential thermal analysis, and transmission electron microscopy. The prepared nanoparticles, VP16-LDH, showed an average diameter of 62.5 nm with a zeta potential of 20.5 mV. Evaluation of the buffering effect of VP16-LDH indicated that the nanohybrids were ideal for administration of the drugs that treat human stomach irritation. The loading amount of intercalated VP16 was 21.94% and possessed a profile of sustained release. The mechanism of VP16-LDH release in the phosphate buffered saline solution at pH 7.4 is likely controlled by the diffusion of VP16 anions from inside to the surface of LDH particles. The in vitro cytotoxicity and antitumor assays indicated that VP16-LDH hybrids were less toxic to GES-1 cells while exhibiting better antitumor efficacy on MKN45 and SGC-7901 cells. These results imply that VP16-LDH is a potential antitumor drug for a broad range of gastric cancer therapeutic applications.Keywords: layered double hydroxides, etoposide, drug delivery, antitumor effect, sustained release

  19. Modular Polyoxometalate-Layered Double Hydroxide Composites as Efficient Oxidative Catalysts.

    Science.gov (United States)

    Chen, Yang; Yao, Zhixiao; Miras, Haralampos N; Song, Yu-Fei

    2015-07-20

    The exploitation of intercalation techniques in the field of two-dimensional layered materials offers unique opportunities for controlling chemical reactions in confined spaces and developing nanocomposites with desired functionality. In this study, the exploitation of the novel and facile "one-pot" anion-exchange method for the functionalization of layered double hydroxides (LDHs) is demonstrated. As a proof-of-concept, we demonstrate the intercalation of a series of polyoxometalate (POM) clusters, Na3[PW12O40]⋅15 H2O (Na3PW12), K6[P2W18O62]⋅14 H2O (K6P2W18), and Na9LaW10O36⋅32 H2O (Na9LaW10) into tris(hydroxymethyl)aminomethane (Tris)-modified layered double hydroxides (LDHs) under ambient conditions without the necessity of degassing CO2. Investigation of the resultant intercalated materials of Tris-LDHs-PW12 (1), Tris-LDH-P2W18 (2), and Tris-LDH-LaW10 (3) for the degradation of methylene blue (MB), rhodamine B (RB) and crystal violet (CV) has been carried out, where Tris-LDH-PW12 reveals the best performance in the presence of H2O2. Additionally, degradation of a mixture of RB, MB and CV by Tris-LDH-PW12 follows the order of CV>MB>RB, which is directly related to the designed accessible area of the interlayer space. Also, the composite can be readily recycled and reused at least ten cycles without measurable decrease of activity.

  20. The Theoretical Investigation and Analysis of High-Performance ZnO Double-Gate Double-Layer Insulator Thin-Film Transistors

    Institute of Scientific and Technical Information of China (English)

    GAO Hai-Xia; HU Rong; YANG Yin-Tang

    2012-01-01

    A novel structure of a ZnO thin-film transistor with a double-gate and double-layer insulator is proposed to improve device performance.Compared with the conventional ZnO thin-film transistor structure,the novel thinfilm transistor has a higher on-state current,steeper sub-threshold characteristics and a lower threshold voltage,owing to the double-gate and high-k dielectric.Based on two-dimensional simulation,the potential channel distribution and the reasons for the improvement in performance are investigated.%A novei structure of a ZnO thin-film transistor with a double-gate and double-layer insulator is proposed to improve device performance. Compared with the conventional ZnO thin-Rim transistor structure, the novel thin-Sim transistor has a higher on-state current, steeper sub-threshold characteristics and a lower threshold voltage, owing to the double-gate and high-k dielectric. Based on two-dimensional simulation, the potential channel distribution and the reasons for the improvement in performance are investigated.

  1. Synthesis, characterization, and antimicrobial properties of novel double layer nanocomposite electrospun fibers for wound dressing applications

    Directory of Open Access Journals (Sweden)

    Hassiba AJ

    2017-03-01

    Full Text Available Alaa J Hassiba,1 Mohamed E El Zowalaty,2 Thomas J Webster,3–5 Aboubakr M Abdullah,6 Gheyath K Nasrallah,7 Khalil Abdelrazek Khalil,8 Adriaan S Luyt,6 Ahmed A Elzatahry1 1Materials Science and Technology Program, College of Arts and Sciences, Qatar University, Doha, Qatar; 2School of Health Sciences, University of KwaZulu-Natal, Durban, South Africa; 3Department of Chemical Engineering, 4Department of Bioengineering, Northeastern University, Boston, MA, USA; 5Center of Excellence for Advanced Materials Research, King Abdulaziz University, Jeddah, Saudi Arabia; 6Center for Advanced Materials, 7Department of Biomedical Science, College of Health Sciences, Biomedical Research Center, Qatar University, Doha, Qatar; 8Department of Mechanical Engineering, College of Engineering, University of Sharjah, Sharjah, United Arab Emirates Abstract: Herein, novel hybrid nanomaterials were developed for wound dressing applications with antimicrobial properties. Electrospinning was used to fabricate a double layer nanocomposite nanofibrous mat consisting of an upper layer of poly(vinyl alcohol and chitosan loaded with silver nanoparticles (AgNPs and a lower layer of polyethylene oxide (PEO or polyvinylpyrrolidone (PVP nanofibers loaded with chlorhexidine (as an antiseptic. The top layer containing AgNPs, whose purpose was to protect the wound site against environmental germ invasion, was prepared by reducing silver nitrate to its nanoparticulate form through interaction with chitosan. The lower layer, which would be in direct contact with the injured site, contained the antibiotic drug needed to avoid wound infections which would otherwise interfere with the healing process. Initially, the upper layer was electrospun, followed sequentially by electrospinning the second layer, creating a bilayer nanofibrous mat. The morphology of the nanofibrous mats was studied by scanning electron microscopy and transmission electron microscopy, showing successful nanofiber

  2. Subsurface volatile content of martian double-layer ejecta (DLE) craters

    Science.gov (United States)

    Viola, Donna; McEwen, Alfred S.; Dundas, Colin M.; Byrne, Shane

    2017-03-01

    Excess ice is widespread throughout the martian mid-latitudes, particularly in Arcadia Planitia, where double-layer ejecta (DLE) craters also tend to be abundant. In this region, we observe the presence of thermokarstically-expanded secondary craters that likely form from impacts that destabilize a subsurface layer of excess ice, which subsequently sublimates. The presence of these expanded craters shows that excess ice is still preserved within the adjacent terrain. Here, we focus on a 15-km DLE crater that contains abundant superposed expanded craters in order to study the distribution of subsurface volatiles both at the time when the secondary craters formed and, by extension, remaining today. To do this, we measure the size distribution of the superposed expanded craters and use topographic data to calculate crater volumes as a proxy for the volumes of ice lost to sublimation during the expansion process. The inner ejecta layer contains craters that appear to have undergone more expansion, suggesting that excess ice was most abundant in that region. However, both of the ejecta layers had more expanded craters than the surrounding terrain. We extrapolate that the total volume of ice remaining within the entire ejecta deposit is as much as 74 km3 or more. The variation in ice content between the ejecta layers could be the result of (1) volatile preservation from the formation of the DLE crater, (2) post-impact deposition in the form of ice lenses; or (3) preferential accumulation or preservation of subsequent snowfall. We have ruled out (2) as the primary mode for ice deposition in this location based on inconsistencies with our observations, though it may operate in concert with other processes. Although none of the existing DLE formation hypotheses are completely consistent with our observations, which may merit a new or modified mechanism, we can conclude that DLE craters contain a significant quantity of excess ice today.

  3. Subsurface volatile content of martian double-layer ejecta (DLE) craters

    Science.gov (United States)

    Viola, Donna; McEwen, Alfred S.; Dundas, Colin M.; Byrne, Shane

    2017-01-01

    Excess ice is widespread throughout the martian mid-latitudes, particularly in Arcadia Planitia, where double-layer ejecta (DLE) craters also tend to be abundant. In this region, we observe the presence of thermokarstically-expanded secondary craters that likely form from impacts that destabilize a subsurface layer of excess ice, which subsequently sublimates. The presence of these expanded craters shows that excess ice is still preserved within the adjacent terrain. Here, we focus on a 15-km DLE crater that contains abundant superposed expanded craters in order to study the distribution of subsurface volatiles both at the time when the secondary craters formed and, by extension, remaining today. To do this, we measure the size distribution of the superposed expanded craters and use topographic data to calculate crater volumes as a proxy for the volumes of ice lost to sublimation during the expansion process. The inner ejecta layer contains craters that appear to have undergone more expansion, suggesting that excess ice was most abundant in that region. However, both of the ejecta layers had more expanded craters than the surrounding terrain. We extrapolate that the total volume of ice remaining within the entire ejecta deposit is as much as 74 km3 or more. The variation in ice content between the ejecta layers could be the result of (1) volatile preservation from the formation of the DLE crater, (2) post-impact deposition in the form of ice lenses; or (3) preferential accumulation or preservation of subsequent snowfall. We have ruled out (2) as the primary mode for ice deposition in this location based on inconsistencies with our observations, though it may operate in concert with other processes. Although none of the existing DLE formation hypotheses are completely consistent with our observations, which may merit a new or modified mechanism, we can conclude that DLE craters contain a significant quantity of excess ice today.

  4. Dual nutraceutical nanohybrids of folic acid and calcium containing layered double hydroxides

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Tae-Hyun; Oh, Jae-Min, E-mail: jaemin.oh@yonsei.ac.kr

    2016-01-15

    Dual nutraceutical nanohybrids consisting of organic nutrient, folic acid (FA), and mineral nutrient, calcium, were prepared based on layered double hydroxide (LDH) structure. Among various hybridization methods such as coprecipitation, ion exchange, solid phase reaction and exfoliation-reassembly, it was found that exfoliation-reassembly was the most effective in terms of intercalation of FA moiety between Ca-containing LDH layers. X-ray diffraction patterns and infrared spectra indicated that FA molecules were well stabilized in the interlayer space of LDHs through electrostatic interaction. From the atomic force and scanning electron microscopic studies, particle thickness of LDH was determined to be varied with tens, a few and again tens of nanometers in pristine, exfoliated and reassembled state, respectively, while preserving particle diameter. The result confirmed layer-by-layer hybrid structure of FA and LDHs was obtained by exfoliation-reassembly. Solid UV–vis spectra showed 2-dimensional molecular arrangement of FA moiety in hybrid, exhibiting slight red shift in n→π* and π→π* transition. The chemical formulae of FA intercalated Ca-containing LDH were determined to Ca{sub 1.30}Al(OH){sub 4.6}FA{sub 0.74}·3.33H{sub 2}O and Ca{sub 1.53}Fe(OH){sub 5.06}FA{sub 2.24}·9.94H{sub 2}O by inductively coupled plasma-atomic emission spectroscopy, high performance liquid chromatography and thermogravimetry, showing high nutraceutical content of FA and Ca. - Highlights: • We successfully intercalated FA molecules into Ca-containing LDHs. • Exfoliation-reassembly was proven to be the most effective. • The interaction between LDH and FA were studied by FT-IR and UV–vis spectra. • Thermal stability of FA were enhanced by electrostatic interaction with LDH layers.

  5. Facile synthesis of methotrexate intercalated layered double hydroxides: Particle control, structure and bioassay explore

    Energy Technology Data Exchange (ETDEWEB)

    Tian, De-Ying; Liu, Zhen-Lei [Jiangsu Key Laboratory of Biofunctional Material, College of Chemistry and Material Science, Nanjing Normal University, Nanjing 210023 (China); Li, Shu-Ping, E-mail: lishuping@njnu.edu.cn [Jiangsu Key Laboratory of Biofunctional Material, College of Chemistry and Material Science, Nanjing Normal University, Nanjing 210023 (China); Li, Xiao-Dong [Jiangsu Key Laboratory of Biofunctional Material, College of Chemistry and Material Science, Nanjing Normal University, Nanjing 210023 (China); Shenzhen Research Institute of Xiamen University, Shenzhen 518057 (China)

    2014-12-01

    To study the influence of particle size on drug efficacy and other properties, a series of methotrexate intercalated layered double hydroxides (MTX/LDHs) were synthesized through the traditional coprecipitation method, using a mixture of water and polyethylene glycol (PEG-400) as the solvent. To adjust the particle size of MTX/LDHs, the dropping way, the volume ratio of water to PEG-400 and different hydrothermal treatment time changed accordingly, and the results indicate that the particle size can be controlled between 90 and 140 nm. Elemental C/H/N and inductive coupled plasma (ICP) analysis indicated that different synthesis conditions almost have no effect on the compositions of the nanohybrids. X-ray diffraction (XRD) patterns manifested the successful intercalation of MTX anions into the LDH interlayers, and it's also found out that different volume ratios of water to PEG-400 and variable dropping way can affect the crystallinity of the final samples, i.e., the volume ratio of 3:1 and pH decreasing are proved to be optimum conditions. Furthermore, both antiparallel monolayer and bilayers adopting different orientations are suggested for four samples from XRD results. Fourier transform infrared spectroscopy (FTIR) investigations proved the coexistence of CO{sub 3}{sup 2−} and MTX anions in the interlayer of the nanohybrids. MTX/LDH particles exhibited hexagonal platelet morphology with round corner and different dropping ways can affect the morphology greatly. Moreover, a DSC study indicated that longer time treatment can weaken the bond between the MTX anions and LDH layers. The kinetic release profiles told us that larger MTX/LDH particles have enhanced the ability of LDH layers to protect interlayer molecules. At last, the bioassay study indicated that the nanohybrids with larger diameters have higher tumor suppression efficiency. - Graphical abstract: A series of methotrexate intercalated layered double hydroxides were synthesized by changing the

  6. Layered double hydroxides as supports for intercalation and sustained release of antihypertensive drugs

    Science.gov (United States)

    Xia, Sheng-Jie; Ni, Zhe-Ming; Xu, Qian; Hu, Bao-Xiang; Hu, Jun

    2008-10-01

    Zn/Al layered double hydroxides (LDHs) were intercalated with the anionic antihypertensive drugs Enalpril, Lisinopril, Captopril and Ramipril by using coprecipitation or ion-exchange technique. TG-MS analyses suggested that the thermal stability of Ena -, Lis - (arranged with monolayer, resulted from X-ray diffraction (XRD) and Fourier transform infrared spectra (FT-IR) analysis was enhanced much more than Cap - and Ram - (arranged with bilayer). The release studies show that the release rate of all samples markedly decreased in both pH 4.25 and 7.45. However, the release time of Ena -, Lis - were much longer compared with Cap -, Ram - in both pH 4.25 and 7.45, it is possible that the intercalated guests, arranged with monolayer in the interlayer, show lesser repulsive force and strong affinity with the LDH layers. And the release data followed both the Higuchi-square-root law and the first-order equation well. Based on the analysis of batch release, intercalated structural models as well as the TG-DTA results, we conclude that for drug-LDH, stronger the affinity between intercalated anions and the layers is, better the thermal property and the stability to the acid attack of drug-LDH, and the intercalated anions are easier apt to monolayer arrangement within the interlayer, were presented.

  7. Removal of Remazol Blue 19 from wastewater by zinc-aluminium-chloride-layered double hydroxides

    Science.gov (United States)

    Elkhattabi, El Hassan; Lakraimi, Mohamed; Badreddine, Mohamed; Legrouri, Ahmed; Cherkaoui, Omar; Berraho, Moha

    2013-06-01

    Layered double hydroxides (LDHs), also called anionic clays, consist of cationic brucite-like layers and exchangeable interlayer anions. These hydrotalcite-like compounds, with Zn and Al in the layers and chloride in the interlayer space, were prepared following the coprecipitation method at constant pH. The affinity of this material for Remazol Blue 19, RB19 [ 2- (3- (4- Amino- 9,10- dihydro- 3- sulpho- 9,10- dioxoanthracen- 4- yl) aminobenzenesulphonyl) vinyl) disodiumsulphate], was studied as a function of contact time, pH of the solutions LDH dose and the RB19/[Zn-Al-Cl] mass ratio. It was found that 48 h is enough time for the equilibrium state to be reached with maximum RB19 retention at pH of 9 for an LDH dose equal to 100 mg and with an RB19/[Zn-Al-Cl] mass ratio higher than 3. The adsorption isotherm, described by the Langmuir model, is of L-type. The results demonstrate that RB19 retention on LDHs occurs by adsorption on external surface when RB19/[Zn-Al-Cl] mass ratio is equal or <3 and by both adsorption and interlayer ion exchange for ratios higher than 3. A mechanism for removal of RB19 anion has been confirmed by X-ray diffraction, IR spectroscopy and TG analysis (TG and DTG curves).

  8. Mg-Al layered double hydroxide intercalated with porphyrin anions: molecular simulations and experiments.

    Science.gov (United States)

    Kovár, Petr; Pospísil, Miroslav; Káfunková, Eva; Lang, Kamil; Kovanda, Frantisek

    2010-02-01

    Molecular modeling in combination with powder X-ray diffraction (XRD) provided new information on the organization of the interlayer space of Mg-Al layered double hydroxide (LDH) containing intercalated porphyrin anions [5,10,15,20-tetrakis(4-sulfonatophenyl)porphyrin (TPPS)]. Anion-exchange and rehydration procedures were used for the preparation of TPPS-containing LDH with an Mg/Al molar ratio of 2. Molecular modeling was carried out in the Cerius(2) and Materials Studio modeling environment. Three types of models were created in order to simulate the experimental XRD patterns of LDH intercalates with a TPPS loading of 70-80% with respect to the theoretical anion exchange capacity (AEC). The models represent single-phase systems with a 100% TPPS loading in the interlayer space (Type 1) and models represent the coexistence of two phases corresponding to the total exchange from 75 to 92% (Type 2). To cover other possible arrangements, models with the coexistence of both TPPS and NO(3)(-) anions in the same interlayer space were calculated (Type 3). The models are described and compared with experimental data. In all cases, guest TPPS anions are tilted with respect to the hydroxide layers, and are horizontally shifted to each other by up to one-half of the TPPS diameter. According to the energy characteristics and simulated XRD, the most probable arrangement is of Type 2, where some layers are saturated with TPPS anions and others are filled with original NO(3)(-) anions.

  9. Spin waves in exchange-coupled double layers in the presence of spin torques

    Science.gov (United States)

    Baláž, Pavel; Barnaś, Józef

    2015-03-01

    Spin-wave spectra of a double magnetic layer are calculated theoretically in the macroscopic limit. Magnetic dynamics is described in terms of the Landau-Lifshitz-Gilbert equation, and both static (of the Ruderman-Kittel-Kasuya-Yosida type) and dynamic (via spin pumping) interlayer couplings are taken into account. The influence of spin pumping and spin transfer torque on the spin-wave spectra (frequency and damping factor) has been studied for both parallel and antiparallel magnetic configurations. The spin-wave spectrum in the parallel magnetic state is reciprocal, while in the antiparallel configuration it is nonreciprocal. In both cases, a substantial reduction of the spin-wave lifetimes due to spin pumping to the nonmagnetic metallic layers has been found. In the parallel configuration, this reduction appears mainly for optical modes, while in the antiparallel configuration, it is remarkable for all modes. In turn, the spin torque due to spin current flowing from a metallic layer, created for instance by the spin Hall effect, gives rise to significant changes in the damping factors as well, but these modifications depend on the sign of spin current. For one spin current orientation, the spin-wave damping becomes reduced and may disappear for some modes at a specific threshold value of the spin current, indicating magnetic instability in the system due to spin transfer torque. For the opposite spin current, the damping is enhanced, which indicates stabilization of the corresponding magnetic state.

  10. Power transmission through double-walled laminated composite panels considering porous layer-air gap insulation

    Institute of Scientific and Technical Information of China (English)

    M H SHOJAEIFARD; R TALEBITOOTI; B RANJBAR; R AHMADI

    2014-01-01

    The acoustic behavior of double-walled laminated composite panels consisting of two porous and air gap middle layers is studied within the classical laminated plate theory (CLPT). Thus, viscous and inertia coupling in a dynamic equation, as well as stress transfer, thermal and elastic coupling of porous material are based on the Biot theory. In addition, the wave equations are extracted according to the vibration equation of composite layers. The transmission loss (TL) of the structure is then calculated by solving these equations simultaneously. Statistical energy analysis (SEA) is developed to divide the structure into specific subsystems, and power transmission is extracted with balancing power flow equations of the subsystems. Comparison between the present work and the results reported elsewhere shows excellent agreement. The results also indicate that, although favorable enhancement is seen in noise control particularly at high frequencies, the corresponding parameters associated with fluid phase and solid phase of the porous layer are important on TL according to the boundary condition interfaces. Finally, the influence of composite material and stacking sequence on power transmission is discussed.

  11. Multilayer films of layered double hydroxide/polyaniline and their ammonia sensing behavior.

    Science.gov (United States)

    Xu, Dong-Mei; Guan, Mei-Yu; Xu, Qing-Hong; Guo, Ying

    2013-11-15

    This paper reports the fabrication of layered double hydroxide (LDH)/conductive polymer multilayer films by alternate assembly of exfoliated ZnAl-LDH nanosheets and polyaniline (PANI) on silicon wafer substrates using the layer-by-layer (LBL) deposition technology. UV-vis absorption spectroscopy indicates a stepwise and regular growth of the (LDH/PANI)n multilayer films upon increasing deposition cycles. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) demonstrate that the surfaces of the films are microscopy smooth and uniform with a thickness of 2 nm per bilayer. Furthermore, the resulting (LDH/PANI)n multilayer films possess high selectively response to ammonia at room temperature. The presence of LDH nanosheets plays a critical role on the gas sensing for the pure PANI film has very low response to ammonia. The LBL assembly process based on LDH combines the conducting polymer and nano-inorganic material, which provides opportunities to develop new inorganic-organic films for gas sensing.

  12. Double-layer parallelization for hydrological model calibration on HPC systems

    Science.gov (United States)

    Zhang, Ang; Li, Tiejian; Si, Yuan; Liu, Ronghua; Shi, Haiyun; Li, Xiang; Li, Jiaye; Wu, Xia

    2016-04-01

    Large-scale problems that demand high precision have remarkably increased the computational time of numerical simulation models. Therefore, the parallelization of models has been widely implemented in recent years. However, computing time remains a major challenge when a large model is calibrated using optimization techniques. To overcome this difficulty, we proposed a double-layer parallel system for hydrological model calibration using high-performance computing (HPC) systems. The lower-layer parallelism is achieved using a hydrological model, the Digital Yellow River Integrated Model, which was parallelized by decomposing river basins. The upper-layer parallelism is achieved by simultaneous hydrological simulations with different parameter combinations in the same generation of the genetic algorithm and is implemented using the job scheduling functions of an HPC system. The proposed system was applied to the upstream of the Qingjian River basin, a sub-basin of the middle Yellow River, to calibrate the model effectively by making full use of the computing resources in the HPC system and to investigate the model's behavior under various parameter combinations. This approach is applicable to most of the existing hydrology models for many applications.

  13. Electric double layer and electrokinetic potential of pectic macromolecules in sugar beet

    Directory of Open Access Journals (Sweden)

    Kuljanin Tatjana A.

    2008-01-01

    Full Text Available Electrokinetic potential is an important property of colloidal particles and, regarding the fact that it is a well defined and easily measurable property, it is considered to be a permanent characteristic of a particular colloidal system. In fact, it is a measure of electrokinetic charge that surrounds the colloidal particle in a solution and is in direct proportion with the mobility of particles in an electric field. Gouy-Chapman-Stern-Graham's model of electric double layer was adopted and it was proven experimentally that the addition of Cu++ ions to sugar beet pectin caused a reduction in the negative electrokinetic potential proportional to the increase of Cu++ concentration. Higher Cu++ concentrations increased the proportion of cation specific adsorption (Cu++ and H+ with regard to electrostatic Coulombic forces. Consequently, there is a shift in the shear plane between the fixed and diffuse layers directed towards the diffuse layer, i.e. towards its compression and decrease in the electrokinetic potential or even charge inversion of pectin macromolecules.

  14. Controlled synthesis of layered double hydroxide nanoplates driven by screw dislocations.

    Science.gov (United States)

    Forticaux, Audrey; Dang, Lianna; Liang, Hanfeng; Jin, Song

    2015-05-13

    Layered double hydroxides (LDHs) are a family of two-dimensional (2D) materials with layered crystal structures that have found many applications. Common strategies to synthesize LDHs lead to a wide variety of morphologies, from discrete 2D nanosheets to nanoflowers. Here, we report a study of carefully controlled LDH nanoplate syntheses using zinc aluminum (ZnAl) and cobalt aluminum (CoAl) LDHs as examples and reveal their crystal growth to be driven by screw dislocations. By controlling and maintaining a low precursor supersaturation using a continuous flow reactor, individual LDH nanoplates with well-defined morphologies were synthesized on alumina-coated substrates, instead of the nanoflowers that result from uncontrolled overgrowth. The dislocation-driven growth was further established for LDH nanoplates directly synthesized using the respective metal salt precursors. Atomic force microscopy revealed screw dislocation growth spirals, and under transmission electron microscopy, thin CoAl LDH nanoplates displayed complex contrast contours indicative of strong lattice strain caused by dislocations. These results suggest the dislocation-driven mechanism is generally responsible for the growth of 2D LDH nanostructures, and likely other materials with layered crystal structures, which could help the rational synthesis of well-defined 2D nanomaterials with improved properties.

  15. Chemical modification of zinc hydroxide nitrate and Zn-Al-layered double hydroxide with dicarboxylic acids.

    Science.gov (United States)

    Arizaga, Gregorio Guadalupe Carbajal; Mangrich, Antonio Salvio; da Costa Gardolinski, José Eduardo Ferreira; Wypych, Fernando

    2008-04-01

    A zinc hydroxide nitrate (ZHN), Zn5(OH)8(NO3)2.2H2O, and a layered double hydroxide (LDH), Zn/Al-NO3 were doped with 0.2 mol% of Cu2+ during alkaline chemical precipitation. Both compounds were intercalated with adipate ((-)OOC(CH2)4COO(-)), azelate ((-)OOC(CH2)7COO(-)), and benzoate (C6H5COO(-)) ions through ion exchange reactions. Solid state 13C nuclear magnetic resonance spectroscopy showed only one signal of carboxylic carbon for adipate and azelate intercalated into LDH, indicating that the carboxylic ends of both acids were equivalent, whereas the signal split when the intercalation was into the ZHN matrix. The electron paramagnetic resonance (EPR) spectrum of copper in octahedral cation sites of LDH layers showed a Hamiltonian parameter ratio g ||/A ||=170 cm and, after intercalation of adipate, the change was not significant: g ||/A ||=174 cm. This result indicates that the carboxylate ions did not coordinate with copper centers. Nonetheless, the intercalation of azelate increased the ratio to g ||/A ||=194 cm, similar to the spectra of ZHN modified with adipate, g ||/A ||=199 cm, and azelate, g ||/A ||=183 and 190 cm, which are associated with the coordination of copper by weak carboxylate anion ligands. Copper occupies octahedral or tetrahedral sites in ZHN layers, and the EPR spectra indicate that the dicarboxylate anions reacted preferentially with octahedral sites, whereas benzoate reacted with both sites.

  16. Nitrogen-doped amorphous oxide semiconductor thin film transistors with double-stacked channel layers

    Science.gov (United States)

    Xie, Haiting; Wu, Qi; Xu, Ling; Zhang, Lei; Liu, Guochao; Dong, Chengyuan

    2016-11-01

    The amorphous oxide semiconductor (AOS) thin film transistors (TFTs) with the double-stacked channel layers (DSCL) combing the amorphous InZnO (a-IZO) films and the nitrogen-doped amorphous InGaZnO (a-IGZO:N) films were proposed and fabricated, which showed the excellent performance with the field-effect mobility of 49.6 cm2 V-1 s-1 and the subthreshold swing of 0.5 V/dec. More interestingly, very stable properties were observed in the bias stress and light illumination tests for these a-IZO/a-IGZO:N TFTs, as seemed to be the evident improvements over the prior arts. The improved performance and stability might be mainly due to the hetero-junctions in the channel layers and less interface/bulk trap density from the in situ nitrogen doping process in the a-IGZO layers. In addition, the passivation effect of the a-IGZO:N films also made some contributions to the stable properties exhibited in these novel DSCL TFTs.

  17. The Double Layer Methodology and the Validation of Eigenbehavior Techniques Applied to Lifestyle Modeling

    Science.gov (United States)

    Lamichhane, Bishal

    2017-01-01

    A novel methodology, the double layer methodology (DLM), for modeling an individual's lifestyle and its relationships with health indicators is presented. The DLM is applied to model behavioral routines emerging from self-reports of daily diet and activities, annotated by 21 healthy subjects over 2 weeks. Unsupervised clustering on the first layer of the DLM separated our population into two groups. Using eigendecomposition techniques on the second layer of the DLM, we could find activity and diet routines, predict behaviors in a portion of the day (with an accuracy of 88% for diet and 66% for activity), determine between day and between individual similarities, and detect individual's belonging to a group based on behavior (with an accuracy up to 64%). We found that clustering based on health indicators was mapped back into activity behaviors, but not into diet behaviors. In addition, we showed the limitations of eigendecomposition for lifestyle applications, in particular when applied to noisy and sparse behavioral data such as dietary information. Finally, we proposed the use of the DLM for supporting adaptive and personalized recommender systems for stimulating behavior change. PMID:28133607

  18. Mechanochemical synthesis of finite particle of layered double hydroxide-acetate intercalation compound: Swelling, thin film and ion exchange

    Science.gov (United States)

    Kuramoto, Kyoko; Intasa-Ard, Soontaree (Grace); Bureekaew, Sareeya; Ogawa, Makoto

    2017-09-01

    Acetate intercalated Mg-Al layered double hydroxide was successfully synthesized by the solid-state reactions between magnesium acetate and aluminum hydroxide as the starting materials using a planetary mil. The acetate intercalated Mg-Al layered double hydroxide prepared by the present solid-state reaction was finite particle and was processed into stable aqueous suspension with variable transparency and viscosity depending on the concentration. By drying the suspension on a substrate under nitrogen atmosphere, thin film (with the thickness of several micrometers) of the acetate intercalated Mg-Al layered double hydroxide with the basal plane oriented parallel to the substrate was obtained. The ion exchange ability of the film, which is as an advantage of the acetate form of layered double hydroxide, was shown by the ion exchange with coumarin-3-carboxylate to give a photoluminescent film. The solid-solid reaction is advantageous for the preparation of layered double hydroxides due to the simple and eco-friendly nature (no solvent) of the operation, lower possibility of carbonate contamination and finite particles of the products.

  19. Synthesis of nanocomposite 2-methyl-4-chlorophenoxyacetic acid with layered double hydroxide: physicochemical characterization and controlled release properties

    Energy Technology Data Exchange (ETDEWEB)

    Sarijo, Siti Halimah, E-mail: izaddinizaddin@yahoo.com; Ghazali, Sheikh Ahmad Izaddin Sheikh Mohd [Faculty of Applied Sciences, Universiti Teknologi MARA (Malaysia); Hussein, Mohd Zobir [Universiti Putra Malaysia, Department of Chemistry, Faculty of Science (Malaysia); Sidek, Norizzah Jaafar [Faculty of Applied Sciences, Universiti Teknologi MARA (Malaysia)

    2013-01-15

    A new organic-inorganic hybrid nanocomposite Zn-Al-MCPA-layered double hydroxide (ZAM) was prepared by intercalation of 2-methyl-4-chlorophenoxyacetic acid (MCPA) into Zn-Al-layered double hydroxide (ZAL) at various concentration of MCPA ranging from 0.1 to 0.7 M. The pH of the synthesis was kept constant at 7.5. Well-ordered hybrid nanocomposite was obtained with 0.4 M MCPA with an expansion of basal spacing from 8.9 Angstrom-Sign in the ZAL to 19.7 Angstrom-Sign in the resulting nanocomposite. The FTIR spectra of the nanocomposite show resemblance peaks of the MCPA and Zn-Al-layered double hydroxide indicating the inclusion of MCPA into the layered double hydroxide. The average particle size of ZAL and ZAM in this study was 115 and 128 nm, respectively. Percentage loading of MCPA was found to be 45.0 % (w/w), calculated based on the percentage of carbon in the sample. The release of MCPA into various aqueous solution was found to be dependent to the anion in the aqueous solution in the order of phosphate > sulfate > chloride with the percentage release of 80, 44, and 8%, respectively. This study shows that Zn-Al-layered double hydroxide can be used as a host carrier for herbicide, MCPA, with controlled release capability.

  20. Synthesis of nanocomposite 2-methyl-4-chlorophenoxyacetic acid with layered double hydroxide: physicochemical characterization and controlled release properties

    Science.gov (United States)

    Sarijo, Siti Halimah; Ghazali, Sheikh Ahmad Izaddin Sheikh Mohd; Hussein, Mohd Zobir; Sidek, Norizzah Jaafar

    2013-01-01

    A new organic-inorganic hybrid nanocomposite Zn-Al-MCPA-layered double hydroxide (ZAM) was prepared by intercalation of 2-methyl-4-chlorophenoxyacetic acid (MCPA) into Zn-Al-layered double hydroxide (ZAL) at various concentration of MCPA ranging from 0.1 to 0.7 M. The pH of the synthesis was kept constant at 7.5. Well-ordered hybrid nanocomposite was obtained with 0.4 M MCPA with an expansion of basal spacing from 8.9 Å in the ZAL to 19.7 Å in the resulting nanocomposite. The FTIR spectra of the nanocomposite show resemblance peaks of the MCPA and Zn-Al-layered double hydroxide indicating the inclusion of MCPA into the layered double hydroxide. The average particle size of ZAL and ZAM in this study was 115 and 128 nm, respectively. Percentage loading of MCPA was found to be 45.0 % (w/w), calculated based on the percentage of carbon in the sample. The release of MCPA into various aqueous solution was found to be dependent to the anion in the aqueous solution in the order of phosphate > sulfate > chloride with the percentage release of 80, 44, and 8 %, respectively. This study shows that Zn-Al-layered double hydroxide can be used as a host carrier for herbicide, MCPA, with controlled release capability.

  1. Self-Assembly of Single-Layer CoAl-Layered Double Hydroxide Nanosheets on 3D Graphene Network Used as Highly Efficient Electrocatalyst for Oxygen Evolution Reaction.

    Science.gov (United States)

    Ping, Jianfeng; Wang, Yixian; Lu, Qipeng; Chen, Bo; Chen, Junze; Huang, Ying; Ma, Qinglang; Tan, Chaoliang; Yang, Jian; Cao, Xiehong; Wang, Zhijuan; Wu, Jian; Ying, Yibin; Zhang, Hua

    2016-09-01

    A non-noble metal based 3D porous electrocatalyst is prepared by self-assembly of the liquid-exfoliated single-layer CoAl-layered double hydroxide nanosheets (CoAl-NSs) onto 3D graphene network, which exhibits higher catalytic activity and better stability for electrochemical oxygen evolution reaction compared to the commercial IrO2 nanoparticle-based 3D porous electrocatalyst.

  2. XPS study of the corrosion resisting composite alloying layer obtained by double glow plasma with the brush plating Ni interlayer

    Institute of Scientific and Technical Information of China (English)

    Jiang Xu; Xishan Xie; Zhong Xu; Wenjin Liu

    2004-01-01

    The Ni-Cr-Mo-Cu multi-element surface alloying with the electric brush plating Ni interlayer on the low carbon steel substrate has been investigated. By the electrochemical method in 3.5% (mass fraction) NaC1 solution, the corrosion resistance of the composite alloying layer and single alloying layer is determined. The experimental results show that the corrosion resistance of the composite alloying layer is obviously better than that of the single alloying layer. The structure and composition of passive films formed on the two kinds of alloyed layers after electrochemical tests in 3.5% NaC1 solution have been studied using X-ray photoelectron spectroscopy (XPS). It is concluded that the double glow plasma surface alloying of low carbon steel with the electric brush plating Ni interlayer is an appropriate technique to enhance the corrosion resistance compared with the single double glow surface alloying.

  3. Building high-efficiency CdS/CdSe-sensitized solar cells with a hierarchically branched double-layer architecture.

    Science.gov (United States)

    Zhu, Zonglong; Qiu, Jianhang; Yan, Keyou; Yang, Shihe

    2013-05-22

    We report a double-layer architecture for a photoanode of quantum-dot-sensitized solar cells (QDSSCs), which consists of a ZnO nanorod array (NR) underlayer and a ZnO nanotetrapod (TP) top layer. Such double-layer and branching strategies have significantly increased the power conversion efficiency (PCE) to as high as 5.24%, nearly reaching the record PCE of QDSSCs based on TiO2. Our systematic studies have shown that the double-layer strategy could significantly reduce charge recombination at the interface between the charge collection anode (FTO) and ZnO nanostructure because of the strong and compact adhesion of the NRs and enhance charge transport due to the partially interpenetrating contact between the NR and TP layers, leading to improved open-circuit voltage (Voc) and short-circuit current density (Jsc). Also, when the double layer was subjected to further branching, a large increase in Jsc and, to a lesser extent, the fill factor (FF) has resulted from increases in quantum-dot loading, enhanced light scattering, and reduced series resistance.

  4. Layered double hydroxide materials coated carbon electrode: New challenge to future electrochemical power devices

    Energy Technology Data Exchange (ETDEWEB)

    Djebbi, Mohamed Amine, E-mail: mohamed.djebbi@etu.univ-lyon1.fr [Institut des Sciences Analytiques UMR CNRS 5280, Université Claude Bernard-Lyon 1, 5 rue de la Doua, 69100 Villeurbanne (France); Laboratoire de Physique des Matériaux Lamellaires et Nano-Matériaux Hybrides, Faculté des Sciences de Bizerte, Université de Carthage, 7021 Bizerte (Tunisia); Braiek, Mohamed [Institut des Sciences Analytiques UMR CNRS 5280, Université Claude Bernard-Lyon 1, 5 rue de la Doua, 69100 Villeurbanne (France); Namour, Philippe [Institut des Sciences Analytiques UMR CNRS 5280, Université Claude Bernard-Lyon 1, 5 rue de la Doua, 69100 Villeurbanne (France); Irstea, 5 rue de la Doua, 69100 Villeurbanne (France); Ben Haj Amara, Abdesslem [Laboratoire de Physique des Matériaux Lamellaires et Nano-Matériaux Hybrides, Faculté des Sciences de Bizerte, Université de Carthage, 7021 Bizerte (Tunisia); Jaffrezic-Renault, Nicole [Institut des Sciences Analytiques UMR CNRS 5280, Université Claude Bernard-Lyon 1, 5 rue de la Doua, 69100 Villeurbanne (France)

    2016-11-15

    Highlights: • MgAl and ZnAl LDH nanosheets were chemically synthesized and deposited over carbon electrode materials. • Catalytic performance of both LDHs was investigated for Fe(II) reduction reaction. • Satisfactory results have been achieved with the MgAl LDH material. • MgAl and ZnAl LDH modified carbon felt were applied in MFC as an efficient anode catalyst. • The LDH-modified anode significantly increased power performance of MFC. - Abstract: Layered double hydroxides (LDHs) have been widely used in the past years due to their unique physicochemical properties and promising applications in electroanalytical chemistry. The present paper is going to focus exclusively on magnesium-aluminum and zinc-aluminum layered double hydroxides (MgAl & ZnAl LDHs) in order to investigate the property and structure of active cation sites located within the layer structure. The MgAl and ZnAl LDH nanosheets were prepared by the constant pH co-precipitation method and uniformly supported on carbon-based electrode materials to fabricate an LDH electrode. Characterization by powder x-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy and transmission electron microscopy revealed the LDH form and well-crystallized materials. Wetting surface properties (hydrophilicity and hydrophobicity) of both prepared LDHs were recorded by contact angle measurement show hydrophilic character and basic property. The electrochemical performance of these hybrid materials was investigated by mainly cyclic voltammetry, electrochemical impedance spectroscopy and chronoamperometry techniques to identify the oxidation/reduction processes at the electrode/electrolyte interface and the effect of the divalent metal cations in total reactivity. The hierarchy of the modified electrode proves that the electronic conductivity of the bulk material is considerably dependent on the divalent cation and affects the limiting parameter of the overall redox process. However

  5. Double layer formation in the expanding region of an inductively coupled electronegative plasma

    CERN Document Server

    Plihon, N; Chabert, P

    2015-01-01

    Double-layers (DLs) were observed in the expanding region of an inductively coupled plasma with $\\text{Ar}/\\text{SF}\\_6$ gas mixtures. No DL was observed in pure argon or $\\text{SF}\\_6$ fractions below few percent. They exist over a wide range of power and pressure although they are only stable for a small window of electronegativity (typically between 8\\% and 13\\% of $\\text{SF}\\_6$ at 1mTorr), becoming unstable at higher electronegativity. They seem to be formed at the boundary between the source tube and the diffusion chamber and act as an internal boundary (the amplitude being roughly 1.5$\\frac{kT\\_e}{e}$)between a high electron density, high electron temperature, low electronegativity plasma upstream (in the source), and a low electron density, low electron temperature, high electronegativity plasma downstream.

  6. Tunable multi-band chiral metamaterials based on double-layered asymmetric split ring resonators

    Science.gov (United States)

    Jia, Xiuli; Wang, Xiaoou; Meng, Qingxin; Zhou, Zhongxiang

    2016-07-01

    We have numerically demonstrated chiral metamaterials based on double-layered asymmetric Au film with hollow out design of split ring resonators on either side of the polyimide. Multiple electric dipoles and magnetic dipoles resulted from parallel and antiparallel currents between the eight split ring resonators. Multi-band circular dichroism is found in the visible frequency regime by studying the transmission properties. Huge optical activity and the induced multi-band negative refractive index are obtained at resonance by calculating the optical activity and ellipticity of the transmitted E-fields. Chirality parameter and effective refractive index are retrieved to illustrate the tunable optical properties of the metamaterials. The underlying mechanisms for the observed circular dichroism are analyzed. These metamaterials would offer flexible electromagnetic applications in the infrared and visible regime.

  7. Up and down translocation events and electric double-layer formation inside solid-state nanopores.

    Science.gov (United States)

    Zanjani, Mehdi B; Engelke, Rebecca E; Lukes, Jennifer R; Meunier, Vincent; Drndić, Marija

    2015-08-01

    We present a theoretical study of nanorod translocation events through solid-state nanopores of different sizes which result in positive or negative ion conductance changes. Using theoretical models, we show that positive conductance changes or up events happen for nanopore diameters smaller than a transition diameter dt, and negative conductance changes or down events occur for nanopore diameters larger than dt. We investigate the underlying physics of such translocation phenomena and describe the significance of the electric double-layer effects for nanopores with small diameters. Furthermore, for nanopores with large diameters, it is shown that a geometric model, formulated based on the nanoparticle blockade inside the nanopore, provides a straightforward and reasonably accurate prediction of ion conductance change. Based on this concept, we also implement a method to distinguish and detect nanorods of different sizes by focusing solely on the sign and not the exact value of the conductance change.

  8. Intracellular release of fluorescein anion from layered double hydroxide nanoparticles indicating endosomal escape

    Science.gov (United States)

    Tanaka, M.; Aisawa, S.; Hidetoshi, H.; Narita, E.; Dong, Q.; Yin, S.; Sato, T.

    2013-12-01

    In recent years, layered double hydroxide (LDH) has been attempted to be applied to a molecular container due to their anion exchange ability, low cytotoxicity and good biocompatibility. In this paper, we investigated the intracellular behaviour of LDH particles in mammalian cells after internalization. Nanoparticles of fluorescein (Fluo) intercalated LDH, Fluo/LDH, were prepared by the coprecipitation followed by subsequent hydrothermal treatment. As-prepared Fluo/LDH particles have the LDH structure and morphology of hexagonal sheet of 100 nm on the average. In addition, Fluo/LDH also exhibited high green fluorescence and low cytotoxicity. By a confocal laser scanning microscopy, the dim green fluorescence was observed throughout cells, including the nucleus. This result indicated that Fluo/LDH released guest anion (Fluo) from LDH structure inside cells. Furthermore, because the fluorescence was observed throughout the cell, Fluo was not retained within endosome structure, i.e., Fluo/LDH was dissolved to release Fluo from endosome.

  9. Investigation of Interface between Ge Electrodes and Ionic Liquid Electrolytes for Electric Double Layer Capacitors

    Science.gov (United States)

    Abeysinghe, R. M.; Oguchi, H.; Kuwano, H.

    2016-11-01

    This study discusses novel way of use of ionic liquids to develop Ge-based electrodes for electric double layer capacitors (EDLC). We found that ionic liquids change their electrochemical properties depending on the amount of the absorbed water. Wet ionic liquids work as solvents to dissolve Ge and make porous structures, whereas dry ones work as electrolytes of the EDLCs. The former property was used to increase surface area of the electrodes which is desired to increase the capacity of EDLCs. This method showed another advantage in contrast to the dry ionic liquids; wet ones could fill the complex Ge pores in parallel to porous structure formation. Finally, after porous formation, we dried the ionic liquid at 100 °C and prepared the EDLCs composed of Ge porous electrodes. Cyclic voltammetry and impedance measurements indicated that the obtained devices can work as EDLCs.

  10. Electron-acoustic solitary pulses and double layers in multi-component plasmas

    CERN Document Server

    Mannan, A; Shukla, P K

    2013-01-01

    We consider the nonlinear propagation of fi?nite amplitude electron-acoustic waves (EAWs) in multi-component plasmas composed of two distinct groups of electrons (cold and hot components), and non-isothermal ions. We use the continuity and momentum equations for cold inertial electrons, Boltzmann law for inertialess hot electrons, non-isothermal density distribution for hot ions, and Poisson's equation to derive an energy integral with a modi?ed Sagdeev potential (MSP) for nonlinear EAWs. The MSP is analyzed to demonstrate the existence of arbitrary amplitude EA solitary pulses (EASPs) and EA double layers (EA-DLs). Small amplitude limits have also been considered and analytical results for EASPs and EA-DLs are presented. The implication of our results to space and laboratory plasmas is briely discussed.

  11. Cadmium-Aluminum Layered Double Hydroxide Microspheres for Photocatalytic CO2Reduction

    KAUST Repository

    Saliba, Daniel

    2016-03-30

    We report the synthesis of cadmium-aluminum layered double hydroxide (CdAl LDH) using the reaction-diffusion framework. As the hydroxide anions diffuse into an agar gel matrix containing the mixture of aluminum and cadmium salts at a given ratio, they react to give the LDH. The LDH self-assembles inside the pores of the gel matrix into a unique spherical-porous shaped microstructure. The internal and external morphologies of the particles are studied by electron microscopy and tomography revealing interconnected channels and a high surface area. This material is shown to exhibit a promising performance in the photoreduction of carbon dioxide using solar light. Moreover, the palladium-decorated version shows a significant improvement in its reduction potential at room temperature. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. A micro-structured Si-based electrodes for high capacity electrical double layer capacitors

    Science.gov (United States)

    Krikscikas, Valdas; Oguchi, Hiroyuki; Yanazawa, Hiroshi; Hara, Motoaki; Kuwano, Hiroki

    2014-11-01

    We challenged to make basis for Si electrodes of electric double layer capacitors (EDLC) used as a power source of micro-sensor nodes. Mcroelectromechanical systems (MEMS) processes were successfully introduced to fabricate micro-structured Si-based electrodes to obtain high surface area which leads to high capacity of EDLCs. Study of fundamental properties revealed that the microstructured electrodes benefit from good wettability to electrolytes, but suffer from electric resistance. We found that this problem can be solved by metal-coating of the electrode surface. Finally we build an EDLC consisting of Au-coated micro-structured Si electrodes. This EDLC showed capacity of 14.3 mF/cm2, which is about 530 times larger than that of an EDLC consisting of flat Au electrodes.

  13. Novel inorganic host layered double hydroxides intercalated with guest organic inhibitors for anticorrosion applications.

    Science.gov (United States)

    Poznyak, S K; Tedim, J; Rodrigues, L M; Salak, A N; Zheludkevich, M L; Dick, L F P; Ferreira, M G S

    2009-10-01

    Zn-Al and Mg-Al layered double hydroxides (LDHs) loaded with quinaldate and 2-mercaptobenzothiazolate anions were synthesized via anion-exchange reaction. The resulting compounds were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy/energy-dispersive X-ray spectroscopy. Spectrophotometric measurements demonstrated that the release of organic anions from these LDHs into the bulk solution is triggered by the presence of chloride anions, evidencing the anion-exchange nature of this process. The anticorrosion capabilities of LDHs loaded with organic inhibitors toward the AA2024 aluminum alloy were analyzed by electrochemical impedance spectroscopy. A significant reduction of the corrosion rate is observed when the LDH nanopigments are present in the corrosive media. The mechanism by which the inhibiting anions can be released from the LDHs underlines the versatility of these environmentally friendly structures and their potential application as nanocontainers in self-healing coatings.

  14. One-step Double-layer Thermal Evaporation Method for Organic Light Emitting Diodes

    Science.gov (United States)

    Kee, Y. Y.; Yong, T. K.; Ong, D. S.; Tou, T. Y.

    2011-03-01

    A new one-step double-layer thermal evaporation method was used to fabricate organic light emitting diodes (OLEDs) with device structure of: ITO (anode)/N,N_-diphenyl-N,N_-bis(3-methylphenyl)-1,1_-diphenyl-4,4_-diamine (TPD) /tris-(8-hydroxyquinoline)aluminum(3) (Alq3)/Al (cathode). These OLEDs were fabricated in cleanroom on the ITO-coated glass with a sheet resistivity of 20Ω/sq and an optical transmittance of 90%. The I-V and brightness characteristic showed that the new method could produce better performance achieving lower turn-on voltage (-2V), higher peak current efficiency (+29%) and higher brightness (+36%).

  15. Layered Double Hydroxide Nanoclusters: Aqueous, Concentrated, Stable, and Catalytically Active Colloids toward Green Chemistry.

    Science.gov (United States)

    Tokudome, Yasuaki; Morimoto, Tsuyoshi; Tarutani, Naoki; Vaz, Pedro D; Nunes, Carla D; Prevot, Vanessa; Stenning, Gavin B G; Takahashi, Masahide

    2016-05-24

    Increasing attention has been dedicated to the development of nanomaterials rendering green and sustainable processes, which occur in benign aqueous reaction media. Herein, we demonstrate the synthesis of another family of green nanomaterials, layered double hydroxide (LDH) nanoclusters, which are concentrated (98.7 g/L in aqueous solvent), stably dispersed (transparent sol for >2 weeks), and catalytically active colloids of nano LDHs (isotropic shape with the size of 7.8 nm as determined by small-angle X-ray scattering). LDH nanoclusters are available as colloidal building blocks to give access to meso- and macroporous LDH materials. Proof-of-concept applications revealed that the LDH nanocluster works as a solid basic catalyst and is separable from solvents of catalytic reactions, confirming the nature of nanocatalysts. The present work closely investigates the unique physical and chemical features of this colloid, the formation mechanism, and the ability to act as basic nanocatalysts in benign aqueous reaction systems.

  16. Co–Fe Prussian Blue Analogue Intercalated into Diamagnetic Mg–Al Layered Double Hydroxides

    Directory of Open Access Journals (Sweden)

    Cuijuan Zhang

    2016-04-01

    Full Text Available A heterostructure of diamagnetic magnesium‒aluminium layered double hydroxides (Mg‒Al LDHs and photomag‐ netic cobalt‒iron Prussian Blue analogue (Co‒Fe PBA was designed, synthesized and then designated as LDH‒PB. The cyanide-bridged Co‒Fe PBA was two-dimensionally intercalated into the Mg‒Al LDH template by the stepwise anion exchange method. LDH‒PB showed ferrimagnetic properties with in-plane antiferromagnetic exchange interactions, as well as small photo-induced magnetization by visible light illumination due to the low dimensional structures and the characteristic photo-induced electronic states of the mixed valence of FeIII(low spin, S = 1/2‒CN‒ CoII(high spin, S = 3/2‒NC‒FeII (low spin, S = 0.

  17. Carbon-Nanotube-Based Electrochemical Double-Layer Capacitor Technologies for Spaceflight Applications

    Science.gov (United States)

    Arepalli, S.; Fireman, H.; Huffman, C.; Maloney, P.; Nikolaev, P.; Yowell, L.; Kim, K.; Kohl, P. A.; Higgins, C. D.; Turano, S. P.

    2005-01-01

    Electrochemical double-layer capacitors, or supercapacitors, have tremendous potential as high-power energy sources for use in low-weight hybrid systems for space exploration. Electrodes based on single-wall carbon nanotubes (SWCNTs) offer exceptional power and energy performance due to the high surface area, high conductivity, and the ability to functionalize the SWCNTs to optimize capacitor properties. This paper will report on the preparation of electrochemical capacitors incorporating SWCNT electrodes and their performance compared with existing commercial technology. Preliminary results indicate that substantial increases in power and energy density are possible. The effects of nanotube growth and processing methods on electrochemical capacitor performance is also presented. The compatibility of different SWCNTs and electrolytes was studied by varying the type of electrolyte ions that accumulate on the high-surface-area electrodes.

  18. A 130 GHz Electro-Optic Ring Modulator with Double-Layer Graphene

    Directory of Open Access Journals (Sweden)

    Lei Wu

    2017-02-01

    Full Text Available The optical absorption coefficient of graphene will change after injecting carriers. Based on this principle, a high-speed double-layer graphene electro-optic modulator with a ring resonator structure was designed in this paper. From the numerical simulations, we designed a modulator. Its optical bandwidth is larger than 130 GHz, the switching energy is 0.358 fJ per bit, and the driven voltage is less than 1.2 V. At the same time, the footprint of the proposed modulator is less than 10 microns squared, which makes the process compatible with the Complementary Metal Oxide Semiconductors (CMOS process. This will provide the possibility for the on-chip integration of the photoelectric device.

  19. Using a double-layered palmaris longus tendon for suspension of facial paralysis

    DEFF Research Database (Denmark)

    Toyserkani, Navid Mohamadpour; Bakholdt, Vivi; Sørensen, Jens Ahm

    2015-01-01

    INTRODUCTION: Facial palsy is a debilitating condition entailing both cosmetic and functional limitations. Static suspension procedures can be performed when more advanced dynamic techniques are not indicated. Since 2006, we have used a double-layered palmaris longus tendon graft through an ovular...... follow-up of 49 months (range: 3-89 months). 93% noted an improvement of their facial appearance at follow-up. Seven out of 11 patients with preoperative problems with speech noted an improvement at follow-up. Eight out of 12 patients with preoperative problems with oral competence noted an improvement......, and it improves the quality of life of patients with facial palsy. It is an acceptable alternative when more advanced procedures are not indicated. FUNDING: not relevant. TRIAL REGISTRATION: not relevant....

  20. Molecular Simulations of Graphene-Based Electric Double-Layer Capacitors

    Science.gov (United States)

    Kalluri, Raja K.; Konatham, Deepthi; Striolo, Alberto

    2011-03-01

    Towards deploying renewable energy sources it is crucial to develop efficient and cost-effective technologies to store electricity. Traditional batteries are plagued by a number of practical problems that at present limit their widespread applicability. One possible solution is represented by electric double-layer capacitors (EDLCs). To deploy EDLCs at the large scale it is necessary to better understand how electrolytes pack and diffuse within narrow charged pores. We present here simulation results for the concentrated aqueous solutions of NaCl, CsCl, and NaI confined within charged graphene-based porous materials. We discuss how the structure of confined water, the salt concentration, the ions size, and the surface charge density determine the accumulation of electrolytes within the porous network. Our results, compared to data available for bulk systems, are critical for relating macroscopic observations to molecular-level properties of the confined working fluids. Research supported by the Department of Energy.

  1. Intercalation and controlled release properties of vitamin C intercalated layered double hydroxide

    Science.gov (United States)

    Gao, Xiaorui; Lei, Lixu; O'Hare, Dermot; Xie, Juan; Gao, Pengran; Chang, Tao

    2013-07-01

    Two drug-inorganic composites involving vitamin C (VC) intercalated in Mg-Al and Mg-Fe layered double hydroxides (LDHs) have been synthesized by the calcination-rehydration (reconstruction) method. Powder X-ray diffraction (XRD), Fourier transform infrared (FTIR), and UV-vis absorption spectroscopy indicate a successful intercalation of VC into the interlayer galleries of the LDH host. Studies of VC release from the LDHs in deionised water and in aqueous CO32- solutions imply that Mg3Al-VC LDH is a better controlled release system than Mg3Fe-VC LDH. Analysis of the release profiles using a number of kinetic models suggests a solution-dependent release mechanism, and a diffusion-controlled deintercalation mechanism in deionised water, but an ion exchange process in CO32- solution.

  2. Preparation and characterization of trans-RhCl(CO)(TPPTS) 2-intercalated layered double hydroxides

    Science.gov (United States)

    Zhang, Xian; Wei, Min; Pu, Min; Li, Xianjun; Chen, Hua; Evans, David G.; Duan, Xue

    2005-09-01

    trans-RhCl(CO)(TPPTS) 2 (TPPTS= tris( m-sulfonatophenyl)phosphine) has been intercalated into Zn-Al layered double hydroxides (LDHs) by the method of ion exchange. The structure, composition and thermal stability of the composite material have been characterized by powder X-ray diffraction, Fourier transform infrared and 31P solid-state magic-angle spinning nuclear magnetic resonance spectroscopy, elemental analysis, thermogravimetry, and differential thermal analysis. The geometry of trans-RhCl(CO)(TPPTS) 2 was fully optimized using the PM3 semiempirical molecular orbital method, and a schematic model for the intercalated species has been proposed. The thermal stability of trans-RhCl(CO)(TPPTS) 2 is significantly enhanced by intercalation, which suggests that such materials may have prospective application as the basis of a supported catalyst system for the hydroformylation of higher olefins.

  3. Study on the adsorption kinetics of orthophosphate anions on layer double hydroxide

    Institute of Scientific and Technical Information of China (English)

    PENG Shuchuan; L(U) Lü; WANG Jin; HAN Lu; CHEN Tianhu; JIANG Shaotong

    2009-01-01

    A kinetic study was conducted on the adsorption of orthophosphate anions on layer double hydroxide (LDH). The adsorption has proved itself to be a spontaneous endothermic process and is large in capacity and rate. The adsorption isotherm correlates well with the Freundlich model, and a rise in temperature will lead to an increase in adsorption efficiency. Additionally, the results suggested that the adsorption is an entropy-increasing process and is in good agreement with the pseudo-second order kinetics. The free energy (ΔG) of adsorption of orthophosphate onto LDH varies within the range of -1.75- -3.34 kJ/mol, the enthalpy (ΔH) varies by 7.96 kJ/mol and the entropy (ΔS) by 33.59 kJ/mol. The adsorption activation energy is 8.3 kJ/mol, showing that the adsorption of orthophosphate onto LDH is determined to be a physical adsorption.

  4. Secondary Activation of Commercial Activated Carbon and its Application in Electric Double Layer Capacitor

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The cheap commercial activated carbon (AC) was improved through the secondary activation under steam in the presence of FeCl2 catalyst in the temperature range of 800-950℃ and its application in electric double layer capacitors (EDLCs) with organic electrolyte was studied. The re-activation of AC results in the increases in both specific capacitance and high rate capability of EDLCs. For AC treated under optimized conditions, its discharge specific capacitance increases up to 55.65 F/g, an increase of about 33% as compared to the original AC, and the high rate capability was increased significantly. The good performances of EDLC with improved AC were correlated to the increasing mesoporous ratio.

  5. Sepiocite, sepiolite-like nanoclay derived from hydrotalcite-like layered double hydroxide.

    Science.gov (United States)

    Park, Dae-Hwan; Jang, Myung Wook; Shul, Yong-Gun; Choy, Jin-Ho

    2011-01-01

    Sepiocite, a synthetic sepiolite-like nanoclay, was derived from hydrotalcite-like Mg2Al(CO3)0.5-layered double hydroxide (LDH) under phase transformation at 270 +/- 3 degrees C. The crystal structure of sepiocite is conceptually very similar to that of sepiolite derived from montmorillonite clay because sepiocite is formed through the alternation of the blocks and tunnels along the crystallographic c-axis, with a partial dehydroxylation of the octahedral Mg-(OH)-Al configuration into tetrahedral ones. Three important findings regarding sepiocite were arrived at: (i) its high specific surface area of 128.25 m2/g with an average particle size of 200 nm, which is approimately equal to 3.5 times larger than the specific surface area of the pristine LDH (34.21 m2/g); (ii) its non-swelling property; and (iii) its strongly reduced anion-exchange capacity.

  6. Double-dark-resonance-enhanced Kerr nonlinearity in a single layer of graphene nanostructure

    Science.gov (United States)

    Solookinejad, Gh.; Panahi, M.; Ahmadi Sangachin, E.; Hossein Asadpour, Seyyed

    2016-08-01

    In this paper, a novel scheme is proposed for the giant enhanced Kerr nonlinearity in a single layer of graphene nanostructure based on quantum optics and nonlinear optical sciences. The linear and the nonlinear susceptibility of the monolayer graphene system are presented in details by using the density matrix method and perturbation theory. After deriving the equations of motion in the steady-state regime, we analytically solve the linear and nonlinear susceptibility of the system. Our numerical results show that the giant enhanced Kerr nonlinearity can be obtained in the double-dark-resonance condition with zero linear and nonlinear absorption. Our results may have potential applications in quantum information science in infrared and terahertz regimes.

  7. Large-amplitude ion-acoustic double layers in multispecies plasma

    Science.gov (United States)

    Jain, S. L.; Tiwari, R. S.; Sharma, S. R.

    1990-06-01

    The effect of second-ion species on the characteristics of large-amplitude ion-acoustic double layers (IADL) in a collisionless, unmagnetized plasma (consisting of hot and cold Maxwellian populations of electrons and two cold-ion species with different masses, concentrations, and charge states) is investigated. After deriving the criteria for the existence of large-amplitude IADL, it is found that the presence of a positive-ion impurity does not considerably modify the characteristics of large-amplitude IADL. However, the presence of negative-ion impurity significantly changes the characteristics of a large-amplitude IADL. An analytic discussion of small-amplitude IADL using a reductive perturbation method is also presented.

  8. Study on Electric Double Layer of a Cylindrical Particle with Functional Theoretical Approach

    Institute of Scientific and Technical Information of China (English)

    WANG,Zheng-Wu; LIU,Xue-Min; YU,Hui-Xin; ZHOU,Ming; JIN,Jian

    2007-01-01

    A new method, i.e. the iterative method in functional theory, was introduced to solve analytically the nonlinear Poisson-Boltzmann (PB) equation under general potential ψ condition for the electric double layer of a charged cylindrical colloid particle in a symmetrical electrolyte solution. The iterative solutions of ψ are expressed as functions of the distance from the axis of the particle with solution parameters: the concentration of ions c, the aggregation number of ions in a unit length m, the dielectric constant ε, the system temperature T and so on. The relative errors show that generally only the first and the second iterative solutions can give accuracy higher than 97%. From the second iterative solution the radius and the surface potential of a cylinder have been defined and the corresponding values have been estimated with the solution parameters. Furthermore, the charge density, the activity coefficient of ions and the osmotic coefficient of solvent were also discussed.

  9. Synthesis of nanocomposite coating based on TiO2/ZnAl layer double hydroxides

    Directory of Open Access Journals (Sweden)

    V. Jovanov

    2017-02-01

    Full Text Available The aim of this investigation was the synthesis of nanocomposite coatings based on Zn-Al layered double hydroxides (Zn-Al LDH and TiO2. The Zn-Al LDH material, which acted as the catalyst support of the active TiO2 component (in the content of 3 and 10 wt. %, was synthesized by a low super saturation co-precipitation method. The interaction between the Zn-Al LDH and the active TiO2 component was accomplished by using vacuum evaporation prior to the mechanical activation and only by mechanical activation. The final suspension based on Zn-Al LDH and 10wt. % TiO2, impregnated only by mechanical activation, showed the optimal characteristics from the aspect of particle size distribution and XRD analysis. These properties had a positive effect on the functional properties of the coatings (photocatalytic activity and self-cleaning efficiency after the water rinsing procedure.

  10. Cooperation of micro- and meso-porous carbon electrode materials in electric double-layer capacitors

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Cheng [State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, 5625 Renmin Street, Changchun 130022, Jilin Province (China); Graduate University of Chinese Academy of Sciences, Beijing 100039 (China); Qi, Li; Wang, Hongyu [State Key Laboratory of Electroanalytical Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, 5625 Renmin Street, Changchun 130022, Jilin Province (China); Yoshio, Masaki [Advanced Research Center, Saga University, 1341 Yoga-machi, Saga 840-0047 (Japan)

    2010-07-01

    The capacitive characteristics of micro- and meso-porous carbon materials have been compared in cyclic voltammetric studies and galvanostatic charge-discharge tests. Meso-porous carbon can keep certain high capacitance values at high scan rates, whereas micro-porous carbon possesses very high capacitance values at low scan rates but fades quickly as the scan rate rises up. For better performance of electric double-layer capacitors (EDLCs), the cooperative application of both kinds of carbon materials has been proposed in the following two ways: mixing both kinds of carbons in the same electrode or using the asymmetric configuration of carbon electrodes in the same EDLC. The cooperative effect on the electrochemical performance has also been addressed. (author)

  11. Hydrothermal Synthesis of Nanorods and Nanowires of Mg/Al Layered Double Hydroxides

    Institute of Scientific and Technical Information of China (English)

    ZHAO Yun; JIAO Qing-ze; DING Xue-jia; ZHANG Li-qun; LIU Yuan-yuan

    2007-01-01

    @@ Layered double hydroxides (LDHs) are a class of synthetic anion clays, characterized by the formula[MⅡ1-xMⅢx (OH)2]x+ (An- )x/n·yH2O (where M =metal and A = anion, usually carbonate)[1-3]. A large number of LDHs with a wide variety of M Ⅱ-M Ⅲ cation pairs including M Ⅰ-M Ⅲ ( e. g. , Li-Al ) and M Ⅱ-MⅣ( e. g. , Co-Ti) have been reported. Thus the identities of the cations(MⅠ , MⅡ , MⅢ and MⅣ) and the interlayer anion (An-) together with the value of the stoichiometric coefficient (x) may vary widely, giving rise to a large class of isostructural materials.

  12. Layered Double Hydroxide as a Vehicle to Increase Toxicity of Gallate Ions against Adenocarcinoma Cells

    Directory of Open Access Journals (Sweden)

    Jenny Arratia-Quijada

    2016-07-01

    Full Text Available The antineoplasic activity of gallic acid has been reported. This compound induces apoptosis and inhibits the growth of several neoplasic cells. However, this molecule is easily oxidized and degraded in the body. The aim of this work was to intercalate gallate ions into layered double hydroxide (LDH nanoparticles under controlled conditions to reduce oxidation of gallate and to evaluate its toxicity against the A549 adenocarcinoma cell line. An isopropanol medium under nitrogen atmosphere was adequate to intercalate gallate ions with a lesser oxidation degree as detected by electron spin resonance spectroscopy. Concentrations of the hybrid LDH-gallate nanoparticles between 0.39 and 25 µg/mL reduced the cell viability to 67%, while the value reached with the pure gallic acid and LDH was 90% and 78%, respectively, thus proving that the combination of gallate ions with the inorganic nanoparticles increases the toxicity potential within this dose range.

  13. Large Scale Synthesis of NiCo Layered Double Hydroxides for Superior Asymmetric Electrochemical Capacitor

    Science.gov (United States)

    Li, Ruchun; Hu, Zhaoxia; Shao, Xiaofeng; Cheng, Pengpeng; Li, Shoushou; Yu, Wendan; Lin, Worong; Yuan, Dingsheng

    2016-01-01

    We report a new environmentally-friendly synthetic strategy for large-scale preparation of 16 nm-ultrathin NiCo based layered double hydroxides (LDH). The Ni50Co50-LDH electrode exhibited excellent specific capacitance of 1537 F g-1 at 0.5 A g-1 and 1181 F g-1 even at current density as high as 10 A g-1, which 50% cobalt doped enhances the electrical conductivity and porous and ultrathin structure is helpful with electrolyte diffusion to improve the material utilization. An asymmetric ultracapacitor was assembled with the N-doped graphitic ordered mesoporous carbon as negative electrode and the NiCo LDH as positive electrode. The device achieves a high energy density of 33.7 Wh kg-1 (at power density of 551 W kg-1) with a 1.5 V operating voltage.

  14. Synthesis and photoluminescence of red emitting phosphors of europium complex intercalated layered double hydroxide

    Science.gov (United States)

    Gao, Xiaorui; Gao, Zhen; Yin, Xiaoru; Xie, Juan

    2015-12-01

    An inorganic-organic red emitting phosphor, europium ethylenediaminetetraacetate complex ([Eu(EDTA)]-) anions intercalated Mg/Al and Zn/Al layered double hydroxides (LDHs) were synthesized through an ion exchange method. X-ray powder diffraction (XRD) results exhibit that a nearly vertical arrangement of [Eu(EDTA)]- anions with the maximal dimension in the gallery is adopted. Measurement of the excitation and emission spectra show that the two materials display high red luminescence from Eu3+ ions. Furthermore, Mg/Al LDH containing europium complex has higher luminescence intensity than Zn/Al LDH, which probably was related with more inversion asymmetry sites of Eu3+ occurring in the Mg/Al LDH.

  15. A Simple Approach for the Synthesis of Gold Nanoparticles Mediated by Layered Double Hydroxide

    Directory of Open Access Journals (Sweden)

    Aires da Conceição Silva

    2013-01-01

    Full Text Available The present work introduces a new procedure to obtain gold nanoparticles (AuNPs. AuNPs (77–213 nm were obtained in the absence of any classical reducing agents in a medium containing Mg2+/Al3+ layered double hydroxide (LDH and N,N-dimethylformamide. XRD analysis showed the presence of crystalline phases of gold in the Au/LDH composite. The 2θ values of peaks corresponding to the LDH interlayer distance indicated that metallic NPs were deposited on the surface of the material. Furthermore, atomic force microscopy (AFM analysis showed that AuNPs tend to agglomerate in a nonclassical halter-like shape.

  16. Silver Orthophosphate Immobilized on Flaky Layered Double Hydroxides as the Visible-Light-Driven Photocatalysts

    Directory of Open Access Journals (Sweden)

    Xianlu Cui

    2012-01-01

    Full Text Available Flaky layered double hydroxide (FLDH was prepared by the reconstruction of its oxide in alkali solution. The composites with FLDH/Ag3PO4 mass ratios at 1.6 : 1 and 3 : 1 were fabricated by the coprecipitation method. The powders were characterized by X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscope, and UV-vis diffuse reflectance spectroscopy. The results indicated that the well-distributed Ag3PO4 in a fine crystallite size was formed on the surface of FLDH. The photocatalytic activities of the Ag3PO4 immobilized on FLDH were significantly enhanced for the degradation of acid red G under visible light irradiation compared to bare Ag3PO4. The composite with the FLDH/Ag3PO4 mass ratio of 3 : 1 showed a higher photocatalytic efficiency.

  17. Photostability enhancement of azoic dyes adsorbed and intercalated into Mg-Al-layered double hydroxide

    Science.gov (United States)

    Liu, Pengfei; Liu, Pei; Zhao, Kongcao; Li, Lei

    2015-11-01

    Two azoic dyes 4-aminoazobenzene-4-sulfonic (AS) and ethyl orange (EO) were adsorbed on or intercalated into Mg-Al-CO3 layered double hydroxide (LDH) for photostability enhancement. Fluorescence analysis results showed that the photostability of two dyes could be greatly improved after being adsorbed on the surface of Mg-Al-CO3-LDH matrix. Furthermore, photostability of adsorbed dyes was superior to that of intercalated dyes. It was suggested that AS or EO was adsorbed on LDHs surface through a strong chemisorption interaction, resulting in the enhancement of photostability. After the UV irradiation under N2 atmosphere, the absorbed dyes not only show great increase of fluorescence intensity but also exhibited high stability against UV irradiation. This work provides a feasible approach to enhance the photostability of azoic dye confined in an inorganic two-dimensional (2D) matrix via changing the microenvironment, which may be considered to be a promising method of improving photostability of solid fluorescent materials.

  18. Cadmium-Aluminum Layered Double Hydroxide Microspheres for Photocatalytic CO2 Reduction.

    Science.gov (United States)

    Saliba, Daniel; Ezzeddine, Alaa; Sougrat, Rachid; Khashab, Niveen M; Hmadeh, Mohamad; Al-Ghoul, Mazen

    2016-04-21

    We report the synthesis of cadmium-aluminum layered double hydroxide (CdAl LDH) using the reaction-diffusion framework. As the hydroxide anions diffuse into an agar gel matrix containing the mixture of aluminum and cadmium salts at a given ratio, they react to give the LDH. The LDH self-assembles inside the pores of the gel matrix into a unique spherical-porous shaped microstructure. The internal and external morphologies of the particles are studied by electron microscopy and tomography revealing interconnected channels and a high surface area. This material is shown to exhibit a promising performance in the photoreduction of carbon dioxide using solar light. Moreover, the palladium-decorated version shows a significant improvement in its reduction potential at room temperature.

  19. Preparation and regulating cell adhesion of anion-exchangeable layered double hydroxide micropatterned arrays.

    Science.gov (United States)

    Yao, Feng; Hu, Hao; Xu, Sailong; Huo, Ruijie; Zhao, Zhiping; Zhang, Fazhi; Xu, Fujian

    2015-02-25

    We describe a reliable preparation of MgAl-layered double hydroxide (MgAl-LDH) micropatterned arrays on gold substrate by combining SO3(-)-terminated self-assembly monolayer and photolithography. The synthesis route is readily extended to prepare LDH arrays on the SO3(-)-terminated polymer-bonded glass substrate amenable for cell imaging. The anion-exchangeable MgAl-LDH micropattern can act both as bioadhesive region for selective cell adhesion and as nanocarrier for drug molecules to regulate cell behaviors. Quantitative analysis of cell adhesion shows that selective HepG2 cell adhesion and spreading are promoted by the micropatterned MgAl-LDH, and also suppressed by methotrexate drug released from the LDH interlayer galleries.

  20. Wetting behavior and drag reduction of superhydrophobic layered double hydroxides films on aluminum

    Science.gov (United States)

    Zhang, Haifeng; Yin, Liang; Liu, Xiaowei; Weng, Rui; Wang, Yang; Wu, Zhiwen

    2016-09-01

    We present a novel method to fabricate Zn-Al LDH (layered double hydroxides) film with 3D flower-like micro-and nanostructure on the aluminum foil. The wettability of the Zn-Al LDH film can be easily changed from superhydrophilic to superhydrophobic with a simple chemical modification. The as-prepared superhydrophobic surfaces have water CAs (contact angles) of 165 ± 2°. In order to estimate the drag reduction property of the surface with different adhesion properties, the experimental setup of the liquid/solid friction drag is proposed. The drag reduction ratio for the as-prepared superhydrophobic sample is 20-30% at low velocity. Bearing this in mind, we construct superhydrophobic surfaces that have numerous technical applications in drag reduction field.

  1. Spreading of Electrolyte Drops on Charged Surfaces: Electric Double Layer Effects on Drop Dynamics

    Science.gov (United States)

    Bae, Kyeong; Sinha, Shayandev; Chen, Guang; Das, Siddhartha

    2015-11-01

    Drop spreading is one of the most fundamental topics of wetting. Here we study the spreading of electrolyte drops on charged surfaces. The electrolyte solution in contact with the charged solid triggers the formation of an electric double layer (EDL). We develop a theory to analyze how the EDL affects the drop spreading. The drop dynamics is studied by probing the EDL effects on the temporal evolution of the contact angle and the base radius (r). The EDL effects are found to hasten the spreading behaviour - this is commensurate to the EDL effects causing a ``philic'' tendency in the drops (i.e., drops attaining a contact angle smaller than its equilibrium value), as revealed by some of our recent papers. We also develop scaling laws to illustrate the manner in which the EDL effects make the r versus time (t) variation deviate from the well known r ~tn variation, thereby pinpointing the attainment of different EDL-mediated spreading regimes.

  2. Rational design of new electrolyte materials for electrochemical double layer capacitors

    Science.gov (United States)

    Schütter, Christoph; Husch, Tamara; Viswanathan, Venkatasubramanian; Passerini, Stefano; Balducci, Andrea; Korth, Martin

    2016-09-01

    The development of new electrolytes is a centerpiece of many strategies to improve electrochemical double layer capacitor (EDLC) devices. We present here a computational screening-based rational design approach to find new electrolyte materials. As an example application, the known chemical space of almost 70 million compounds is investigated in search of electrochemically more stable solvents. Cyano esters are identified as especially promising new compound class. Theoretical predictions are validated with subsequent experimental studies on a selected case. These studies show that based on theoretical predictions only, a previously untested, but very well performing compound class was identified. We thus find that our rational design strategy is indeed able to successfully identify completely new materials with substantially improved properties.

  3. Effect of Layered Double Hydroxides on Ultraviolet Aging Resistance of SBS Modifi ed Bitumen Membrane

    Institute of Scientific and Technical Information of China (English)

    XU Song; YU Jianying; XUE Lihui; SUN Yubin; XIE Dong

    2015-01-01

    Layered double hydroxides (LDHs)/styrene-butadiene-styrene (SBS) copolymer modified bitumen was prepared by melt blending. The effect of LDHs on the ultraviolet (UV) aging behavior of SBS modifi ed bitumen was investigated. The changes of chemical structures of modifi ed bitumen before and after UV aging were characterized by Fourier transform infrared spectroscopy (FTIR). The results show that LDHs obviously reduce the variation of softening point and low temperaturefl exibility of SBS modifi ed bitumen under different UV radiation intensities, which indicates that the UV aging resistance performance of SBS modifi ed bitumen is improved effectively by LDHs. Compared with SBS modifi ed bitumen, the changes of carbonyl, sulfoxide and butadienyl of LDHs/SBS modified bitumen decrease significantly after UV aging according to FTIR analysis, demonstrating that the oxidation and degradation reactions of SBS modifi ed bitumen were restrained effectively by adding LDHs.

  4. Fatigue Properties of Layered Double Hydroxides Modified Asphalt and Its Mixture

    Directory of Open Access Journals (Sweden)

    Xing Liu

    2014-01-01

    Full Text Available This study investigated the influence of layered double hydroxides (LDHs on the fatigue properties of asphalt mixture. In this paper, different aging levels (thin film oven test (TFOT and ultraviolet radiation aging (UV aging for short of bitumen modified with various mass ratios of the LDHs were investigated. The TFOT and UV aging process were used to simulate short-term field thermal-oxidative aging and long-term field light UV aging of bitumen, respectively. The influences of LDHs on the fatigue properties of LDHs were evaluated by dynamic shear rheometer (DSR and indirect tensile fatigue test. Results indicated that the introduction of LDHs could change the fatigue properties of bitumen under a stress control mode. The mixture with modified bitumen showed better fatigue resistance than the mixture with base bitumen. The results illustrated that the LDHs would be alternative modifiers used in the bitumen to improve the lifetime of asphalt pavements.

  5. APPLICATIONS OF LAYERED DOUBLE HYDROXIDES IN REMOVING OXYANIONS FROM OIL REFINING AND COAL MINING WASTEWATER

    Energy Technology Data Exchange (ETDEWEB)

    Song Jin; Paul Fallgren

    2006-03-01

    Western Research Institute (WRI), in conjunction with the U.S. Department of Energy (DOE), conducted a study of using the layered double hydroxides (LDH) as filter material to remove microorganisms, large biological molecules, certain anions and toxic oxyanions from various waste streams, including wastewater from refineries. Results demonstrate that LDH has a high adsorbing capability to those compounds with negative surface charge. Constituents studied include model bacteria, viruses, arsenic, selenium, vanadium, diesel range hydrocarbons, methyl tert-butyl ether (MTBE), mixed petroleum constituents, humic materials and anions. This project also attempted to modify the physical structure of LDH for the application as a filtration material. Flow characterizations of the modified LDH materials were also investigated. Results to date indicate that LDH is a cost-effective new material to be used for wastewater treatment, especially for the treatment of anions and oxyanions.

  6. Large-area WSe2 electric double layer transistors on a plastic substrate

    KAUST Repository

    Funahashi, Kazuma

    2015-04-27

    Due to the requirements for large-area, uniform films, currently transition metal dichalcogenides (TMDC) cannot be used in flexible transistor industrial applications. In this study, we first transferred chemically grown large-area WSe2 monolayer films from the as-grown sapphire substrates to the flexible plastic substrates. We also fabricated electric double layer transistors using the WSe2 films on the plastic substrates. These transistors exhibited ambipolar operation and an ON/OFF current ratio of ∼104, demonstrating chemically grown WSe2 transistors on plastic substrates for the first time. This achievement can be an important first step for the next-generation TMDC based flexible devices. © 2015 The Japan Society of Applied Physics.

  7. Migration of nanosized layered double hydroxide platelets from polylactide nanocomposite films

    DEFF Research Database (Denmark)

    Schmidt, Bjørn; Katiyar, Vimal; Plackett, David

    2011-01-01

    Melt-extruded L-polylactide (PLA) nanocomposite films were prepared from commercially available PLA and laurate-modified Mg–Al layered double hydroxide (LDH-C12). Three films were tested for total migration as well as specific migration of LDH, tin, laurate and low molecular weight PLA oligomers...... (OLLA). This is the first reported investigation on the migration properties of PLA-LDH nanocomposite films. The tests were carried out as part of an overall assessment of the suitability of such films for use as food contact materials (FCM). Total migration was determined according to a European...... standard method. All three films showed migration of nanosized LDH, which was quantified using acid digestion followed by inductively coupled plasma mass spectrometric (ICP–MS) detection of 26Mg. Migration of LDH from the films was also confirmed by examining migrates using transmission electron microscopy...

  8. Role of nonthermal electrons on dust ion acoustic double layer with variable dust charge

    Science.gov (United States)

    Borah, Prathana; Gogoi, Deepshikha; Das, Nilakshi

    2016-01-01

    The presence of nonthermal electron may play an important role in the formation of nonlinear structures in plasma. On the other hand, fluctuation of dust charge is an important and unique feature of complex plasma and it gives rise to a dissipative effect in the system leading to the formation of nonlinear structures due to the balance between nonlinearity and dissipation. In this paper, the propagation of nonlinear dust ion acoustic (DIA) wave in unmagnetized collisionless dusty plasma consisting of ions, nonthermal electrons and dust grains with variable negative charge has been investigated using the Sagdeev potential method. The existence domain of rarefactive double layer (DL) in the DIA wave has been investigated for the range of plasma parameters. The real potential has been obtained by numerically solving the Poisson equation and dust charging equation. It is observed that the presence of nonthermal electrons strengthens the DIA DL.

  9. Layered double hydroxide nanosheet as a two-dimensional support of dense platinum nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Hyo Gyoung; Cho, Se Hee; Ji, Hong Geun [H and A PharmaChem, R and D center, Bucheon (Korea, Republic of); Lee, Jong Hyeon [Dept. of Chemistry, The Catholic University of Korea, Bucheon (Korea, Republic of)

    2017-02-15

    Transition metal nanoparticles (NPs) with a narrow size distribution have been intensively synthesized on various solid supports for anti-agglomeration, and high catalytic activity and selectivity. Layered double hydroxides (LDH) are currently attracting intense interest in the field of heterogeneous catalysis as catalyst supports. In order to obtain a well-crystallized LDH nanosheet, the as-synthesize d carbonate form of LDH was hydrothermally treated according to a reported procedure, and further reacted by anion-exchange with an aqueous solution of NaNO{sub 3} and acetate buffer to give the nitrate form of LDH. Dense and uniform Pt NPs were synthesized on the exfoliated LDH nanosheets through precursor exchange and thermal reduction of the precursor ions. In this nanocomposite, the Pt Nps were uniformly grown on the surface of the LDH nano sheet and the average size of Pt Nps was 2nm.

  10. Poly I-lactide-layered double hydroxide nanocomposites via in situ polymerization of I-lactide

    DEFF Research Database (Denmark)

    Katiyar, Vimal; Gerds, N.; Koch, C.B.;

    2010-01-01

    The use of clay nanofillers offers a potential route to improved barrier properties in polylactide films. Magnesium–aluminium layered double hydroxides (LDHs) are interesting in this respect and we therefore explored synthesis of PLA-LDH nanocomposites by ring-opening polymerization. This method...... is attractive because it should ensure good dispersion of LDH in the polymer. The effect of adding either LDH carbonate (LDH-CO3) or laurate-modified LDH (LDH-C12) was investigated. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy revealed that exfoliated nanocomposites were...... obtained when using LDH-C12 but that LDH-CO3 gave a partly phase-separated morphology. Thermogravimetric analysis showed that PLA-LDH combinations exhibited higher degradation onset temperatures and differential scanning calorimetry confirmed that LDHs can act as nucleating agents. However, PLA molecular...

  11. Synthesis of carbon fibers with branched nanographene sheets for electrochemical double layer capacitor application.

    Science.gov (United States)

    Matsushima, Masahiro; Kalita, Golap; Kato, Kimitoshi; Noda, Mikio; Uchida, Hideo; Wakita, Koichi; Umeno, Masayoshi; Tanemura, Masaki

    2014-03-01

    We demonstrate a one step technique to synthesis the carbon fibers (CNFs) with branched nanographene sheets by the pulsed discharge (PD) plasma chemical vapor deposition (CVD) process. Highly crystalline branched nanographene sheets were directly grown from the surface of the carbon fibers to obtain a three dimensional (3D) nanostructure. The growth process can be explained from the catalyst support growth of the CNFs, and subsequently nucleation and growth of the nanographene sheets from the crystalline surface of the CNF. The deposited nanostructured films with different pulse discharge were used as an electrode for electrochemical double-layer capacitors (EDLC). It is observed that the capacitance is dependent on the morphology of the electrode materials and an optimum capacitance is obtained with the branched nanographene on CNFs.

  12. Removal of guar and humus from water by layered double hydroxides.

    Science.gov (United States)

    Jin, Song; Cui, Kangping; Fallgren, Paul H; Urynowicz, Michael A; Jian, Jiazhong

    2009-01-01

    Natural organic matter such as guar and humus are recalcitrant to conventional pretreatment technologies and can potentially foul processes such as membranes during water treatment. An innovative method of using synthetic layered double hydroxides (LDH) was investigated for removing common natural organic matter in the form of guar gum (GG) and humic acid (HA) from water. Adsorption isotherms were evaluated with Langmuir and Freundlich models. Results show the affinity of GG and HA to LDH to be 11.31 and 9.33 mg g(-1) LDH, respectively. Kinetic isotherms indicate that the sorbing rates of LDH to GG and HA increase with initial GG and HA concentrations, fitting a pseudo-second order model. This study demonstrate that LDH may be an effective material in removing GG and HA from waters and offer an alternative to conventional pretreatment technologies for the mitigation fouling of membrane and other systems in water treatment.

  13. Impedance analysis of porous carbon electrodes to predict rate capability of electric double-layer capacitors

    Science.gov (United States)

    Yoo, Hyun Deog; Jang, Jong Hyun; Ryu, Ji Heon; Park, Yuwon; Oh, Seung M.

    2014-12-01

    Electrochemical impedance analysis is performed to predict the rate capability of two commercial activated carbon electrodes (RP20 and MSP20) for electric double-layer capacitor. To this end, ac impedance data are fitted with an equivalent circuit that comprises ohmic resistance and impedance of intra-particle pores. To characterize the latter, ionic accessibility into intra-particle pores is profiled by using the fitted impedance parameters, and the profiles are transformed into utilizable capacitance plots as a function of charge-discharge rate. The rate capability that is predicted from the impedance analysis is well-matched with that observed from a charge-discharge rate test. It is found that rate capability is determined by ionic accessibility as well as ohmic voltage drop. A lower value in ionic accessibility for MSP20 is attributed to smaller pore diameter, longer length, and higher degree of complexity in pore structure.

  14. Mixed oxides derived from layered double hydroxides as novel catalysts for phenol photodegradation

    Science.gov (United States)

    Puscasu, C. M.; Carja, G.; Mureseanu, M.; Zaharia, C.

    2017-08-01

    The removal of organic pollutants is nowadays a very challenging aspect of the environmental research. There are strong interests to develop novel semiconducting photocatalysts able to efficiently promote advanced oxidation reactions. The development of photocatalysts based on the mixtures of mixed oxides derived from layered double hydroxides (LDHs) - a family of naturally occurring anionic clays - might offer novel environmental-friendly solutions for the cost effective removal of organic pollutants. This work presents ZnO/ZnAl2O4, ZnO/Zn2TiO4 and ZnO/ZnCr2O4 as novel photocatalytic formulations for phenol degradation under UV irradiation. They were obtained by the controlled thermal treatment of the layered double hydroxides matrices (LDHs), as precursors materials, type ZnM-LDH (M = Al3+, Cr3+ or Ti4+). The LDHs were synthesized by the co-precipitation method at a constant pH. Controlled calcination at 650°C gives rise to solutions of mixed metal oxides. The structural and nanoarchitectonics characteristics of the studied catalysts were described by: XRD, SEM/TEM and TG/DTG techniques. Results show that in the photocatalytic process of the phenol degradation from aqueous solutions, ZnO/ZnCr2O4 and ZnO/ZnAl2O4 showed the best performance degrading ∼98% of phenol after 3.5 hs and 5 hs, respectively; while ZnO/Zn2TiO4 has degraded almost 80 % after 7.5 hs of UV irradiation. These results open new opportunities in the development of new cost effective photoresponsive formulations able to facilitate the photo-degradation of the organic pollution as “green” solution for removal of dangerous pollutants.

  15. Absorption of the selenite anion from aqueous solutions by thermally activated layered double hydroxide.

    Science.gov (United States)

    Liu, Rui; Frost, Ray L; Martens, Wayde N

    2009-03-01

    The presence of selenite or selenate in potable water is a health hazard especially when consumed over a long period of time. Its removal from potable water is of importance. This paper reports technology for the removal of selenite from water through the use of thermally activated layered double hydroxides. Mg/Al hydrotalcites with selenite in the interlayer were prepared at different times from 0.5 to 20 h through ion exchange. X-ray diffraction of the MgAlSeO3 hydrotalcites indicates that the selenite anion entered the interlayer spacing of Mg/Al hydrotalcite and MgAlSeO3 hydrotalcite was formed. Raman spectra proved the presence of selenite anion in the hydrotalcite interlayer as the counter anion. The band intensity and width of MgAlSeO3 hydrotalcite in the region of 3800-3000 cm(-1) increase with the adsorption of selenite by the Mg/Al hydrotalcite. The characteristic bands of free selenite anions in the MgAlSeO3 hydrotalcites are located between the region between 850 and 800 cm(-1). The Raman spectra of the lower wave number region of 550-500 cm(-1) show a shift toward higher wave numbers with adsorption of the selenite. An estimation of the amount of selenite anion removed by the thermally activated layered double hydroxide was obtained through the measurement of the intensity of the selenite Raman bands at 814 and 835 cm(-1) resulting from the amount of selenite anion remaining in solution. Thermally activated LDHs provide a mechanism for removing selenite anions from aqueous solutions.

  16. Molecular dynamics simulation studies of ionic liquid electrolytes for electric double layer capacitors

    Science.gov (United States)

    Hu, Zongzhi

    Molecular Dynamics (MD) simulation has been performed on various Electric Double Layer Capacitors (EDLCs) systems with different Room Temperature Ionic Liquids (RTILs) as well as different structures and materials of electrodes using a computationally efficient, low cost, united atom (UA)/explicit atom (EA) force filed. MD simulation studies on two 1-butyl-3-methylimidazolium (BMIM) based RTILs, i.e., [BMIM][BF4] and [BMIM][PF6], have been conducted on both atomic flat and corrugated graphite as well as (001) and (011) gold electrode surfaces to understand the correlations between the Electric Double Layer (EDL) structure and their corresponding differential capacitance (DC). Our MD simulations have strong agreement with some experimental data. The structures of electrodes also have a strong effect on the capacitance of EDLCs. MD simulations have been conducted on RTILs of N-methyl-N- propylpyrrolidinium [pyr13] and bis(fluorosulfonyl)imide (FSI) as well as [BMIM][PF6] on both curvature electrodes (fullerenes, nanotube, nanowire) and atomic flat electrode surfaces. It turns out that the nanowire electrode systems have the largest capacitance, following by fullerene systems. Nanotube electrode systems have the smallest capacitance, but they are still larger than that of atomically flat electrode system. Also, RTILs with slightly different chemical structure such as [Cnmim], n = 2, 4, 6, and 8, FSI and bis(trifluoromethylsulfonyl)imide (TFSI), have been examined by MD simulation on both flat and nonflat graphite electrode surfaces to study the effect of cation and anion's chemical structures on EDL structure and DC. With prismatic (nonflat) graphite electrodes, a transition from a bell-shape to a camel-shape DC dependence on electrode potential was observed with increase of the cation alkyl tail length for FSI systems. In contrast, the [Cnmim][TFSI] ionic liquids generated only a camel-shape DC on the rough surface regardless of the length of alkyl tail.

  17. Transmission upper limit of band-pass double-layer FSS and method of transmission performance improvement

    Institute of Scientific and Technical Information of China (English)

    Minjie Huang; Zhijun Meng

    2015-01-01

    The transmission upper limit of a double-layer frequency selective surface (FSS) with two infinitely thin metal arrays is pre-sented based on the study of the general equivalent transmission line model of a double-layer FSS. Results of theoretical analyses, numerical simulations and experiments show that this transmis-sion upper limit is independent of the array and the element, which indicates that it is impossible to achieve a transmission upper limit higher than this one under a given incident and dielectric-supporting condition by the design of the periodic array. Both the applicable condition and the possible application of the transmis-sion upper limit are discussed. The results show that the transmis-sion upper limit not only has a good reachability, but also provides a key to effectively improve the transmission performance of a double-layer FSS or more complex frequency selective structures.

  18. Ion-acoustic double layers in a five component cometary plasma with kappa described electrons and ions

    Science.gov (United States)

    Michael, Manesh; Venugopal, C.; Sreekala, G.; Willington, Neethu Theresa; Sebastian, Sijo

    2016-07-01

    We investigate the propagation characteristics of Ion-acoustic solitons and double layers in a five component cometary plasma consisting of positively and negatively charged oxygen ions, kappa described hydrogen ions, hot solar electrons, and slightly colder cometary electrons. The KdV and modified KdV equations are derived for the system and its solution is plotted for different kappa values and negatively charged oxygen ion densities. It is found that the strength of double layer increases with increasing spectral indices. It, however, decreases with increasing negatively charged oxygen ion densities. The parameter for the transition from compressive to rarefactive soliton is also specified. The presence of negatively charged oxygen ions can significantly affect the nonlinearity coefficients (both quadratic and cubic) of a double layer.

  19. Controlled supramolecular structure of guanosine monophosphate in the interlayer space of layered double hydroxide

    Directory of Open Access Journals (Sweden)

    Gyeong-Hyeon Gwak

    2016-12-01

    Full Text Available Guanosine monophosphates (GMPs were intercalated into the interlayer space of layered double hydroxides (LDHs and the molecular arrangement of GMP was controlled in LDHs. The intercalation conditions such as GMP/LDH molar ratio and reaction temperature were systematically adjusted. When the GMP/LDH molar ratio was 1:2, which corresponds to the charge balance between positive LDH sheets and GMP anions, GMP molecules were well-intercalated to LDH. At high temperature (100 and 80 °C, a single GMP molecule existed separately in the LDH interlayer. On the other hand, at lower temperature (20, 40 and 60 °C, GMPs tended to form ribbon-type supramolecular assemblies. Differential scanning calorimetry showed that the ribbon-type GMP assembly had an intermolecular interaction energy of ≈101 kJ/mol, which corresponds to a double hydrogen bond between guanosine molecules. Once stabilized, the interlayer GMP orientations, single molecular and ribbon phase, were successfully converted to the other phase by adjusting the external environment by stoichiometry or temperature control.

  20. Accessing the biocompatibility of layered double hydroxide by intramuscular implantation: histological and microcirculation evaluation

    Science.gov (United States)

    Cunha, Vanessa Roberta Rodrigues; de Souza, Rodrigo Barbosa; da Fonseca Martins, Ana Maria Cristina Rebello Pinto; Koh, Ivan Hong Jun; Constantino, Vera Regina Leopoldo

    2016-01-01

    Biocompatibility of layered double hydroxides (LDHs), also known as hydrotalcite-like materials or double metal hydroxides, was investigated by in vivo assays via intramuscular tablets implantation in rat abdominal wall. The tablets were composed by chloride ions intercalated into LDH of magnesium/aluminum (Mg2Al-Cl) and zinc/aluminum (Zn2Al-Cl). The antigenicity and tissue integration capacity of LDHs were assessed histologically after 7 and 28 days post-implantation. No fibrous capsule nearby the LDH was noticed for both materials as well any sign of inflammatory reactions. Sidestream Dark Field imaging, used to monitor in real time the microcirculation in tissues, revealed overall integrity of the microcirculatory network neighboring the tablets, with no blood flow obstruction, bleeding and/or increasing of leukocyte endothelial adhesion. After 28 days Mg2Al-Cl promoted multiple collagen invaginations (mostly collagen type-I) among its fragments while Zn2Al-Cl induced predominantly collagen type–III. This work supports previous results in the literature about LDHs compatibility with living matter, endorsing them as functional materials for biomedical applications. PMID:27480483

  1. Double diffusive convection in a porous medium layer saturated with an Oldroyd nanofluid

    Science.gov (United States)

    Umavathi, J. C.; Sasso, Maurizio

    2017-01-01

    The onset of double diffusive convection in a horizontal layer of a porous medium saturated with an Oldroyd nanofluid is studied using linear and non-linear stability analysis. The modified Darcy-Oldroyd model is used for the momentum equation. The model used for the Oldroyd nanofluid incorporates the effects of Brownian motion and thermophoresis. The thermal energy equations include the diffusion and cross diffusion terms. The linear theory depends on normal mode technique and the onset criterion for stationary and oscillatory convection is derived analytically. The effects of various governing parameters viz., concentration Rayleigh number, nanofluid Lewis number, modified diffusivity ratio, Soret and Dufour parameters, Solutal Rayleigh number, Vadasz number, Lewis number, relaxation, and retardation parameters, viscosity ratio and conductivity ratio on the stationary and oscillatory convections are presented graphically. The non-linear theory based on the representation of Fourier series method is used to find the heat and mass transport. The effect of various parameters on transient heat and mass transfer is also brought out and nonlinear analysis depends on a minimal representation of double Fourier series. We also study the effect of time on transient Nusselt numbers which is found to be oscillatory when time is small. However, when time becomes very large all the three transient Nusselt values approaches to their steady state values.

  2. Bifunctional sensor of pentachlorophenol and copper ions based on nanostructured hybrid films of humic acid and exfoliated layered double hydroxide via a facile layer-by-layer assembly.

    Science.gov (United States)

    Yuan, Shuang; Peng, Dinghua; Hu, Xianluo; Gong, Jingming

    2013-06-27

    A new, highly sensitive bifunctional electrochemical sensor for the simultaneous determination of pentachlorophenol (PCP) and copper ions (Cu(2+)) has been developed, where organic-inorganic hybrid ultrathin films were fabricated by alternate assembly of humic acid (HA) and exfoliated Mg-Al-layered double hydroxide (LDH) nanosheets onto ITO substrates via a layer-by-layer (LBL) approach. The multilayer films were then characterized by means of UV-vis spectrometry, scanning electron microscopy (SEM), and atomic force microscope (AFM). These films were found to have a relatively smooth surface with almost equal amounts of HA incorporated in each cycle. Its electrochemical performance was systematically investigated. Our results demonstrate that such a newly designed (LDH/HA)n multilayer films, combining the individual properties of HA (dual recognition ability for organic herbicides and metal ions) together with LDH nanosheets (a rigid inorganic matrix), can be applied to the simultaneous analysis of PCP and Cu(II) without interference from each other. The LBL assembled nanoarchitectures were further investigated by X-ray photoelectron spectroscopy (XPS) and infrared spectroscopy (IR), which provides insight for bifunctional sensing behavior. Under the optimized conditions, the detection limit was found to be as low as 0.4 nM PCP, well below the guideline value of PCP in drinking water (3.7 nM) set by the United States Environmental Protection Agency (U.S. EPA), and 2.0 nM Cu(2+), much below the guideline value (2.0 mg L(-1), ~31.2 nM) from the World Health Organization (WHO), respectively. Toward the goal for practical applications, this simple and cost-effective probe was further evaluated by monitoring PCP and Cu(II) in water samples.

  3. Mg–Al layered double hydroxide–methotrexate nanohybrid drug delivery system: Evaluation of efficacy

    Energy Technology Data Exchange (ETDEWEB)

    Chakraborty, Jui [Central Glass and Ceramic Research Institute, CSIR, 196 Raja S.C. Mullick Road, Kolkata-700032 (India); Roychowdhury, Susanta [Indian Institute of Chemical Biology, CSIR, Kolkata-700032 (India); Sengupta, Somoshree [Central Glass and Ceramic Research Institute, CSIR, 196 Raja S.C. Mullick Road, Kolkata-700032 (India); Ghosh, Swapankumar, E-mail: swapankumar.ghosh2@mail.dcu.ie [Central Glass and Ceramic Research Institute, CSIR, 196 Raja S.C. Mullick Road, Kolkata-700032 (India)

    2013-05-01

    Mg–Al layered double hydroxide nanoparticles were synthesized by one-pot co-precipitation method and anticancerous drug methotrexate was incorporated into it by in-situ ion exchange. The LDH–MTX nanohybrid produced moderately stable suspension in water, as predicted by zeta potential measurement. X-ray diffraction revealed that the basal spacing increased to nearly twice the same for pristine LDH on MTX intercalation. Thermogravimetric analyses confirmed an increase in thermal stability of the intercalated drug in the LDH framework. A striking enhancement in efficacy/sensitivity of MTX on the HCT-116 cells was obtained when intercalated within the LDH layers, as revealed by the attainment of half maximal inhibitory concentration of LDH–MTX nanohybrid by 48 h, whereas, bare MTX required 72 h for the same. The MTX release from MgAl-LDH–MTX hybrids in phosphate buffer saline at pH 7.4 followed a relatively slow, first order kinetics and was complete within 8 days following diffusion and crystal dissolution mechanism. Highlights: ► MgAl-LDH–methotrexate nanohybrid synthesized by one-pot synthetic strategy ► IC{sub 50} for LDH–MTX indicates the efficacy of nanohybrid as an efficient drug carrier. ► XRD and TEM study on nanohybrid revealed successful intercalation of methotrexate. ► TG analyses showed ∼ 13.1 wt.% of methotrexate loading into the nanohybrid.

  4. Engineering of (10-hydroxycamptothecin intercalated layered double hydroxide)@liposome nanocomposites with excellent water dispersity

    Science.gov (United States)

    Zhang, Yongfang; Wu, Xiaowen; Mi, Yuwei; Li, Haiping; Hou, Wanguo

    2017-09-01

    A hierarchical nanocomposite of 10-hydroxycamptothecin (HCPT), a nonionic and lipophilic anticancer drug, intercalated layered double hydroxide (LDH) encapsulated in liposomes was constructed. HCPT molecules were first incorporated into sodium cholate (Ch) micelles, and the resultant negatively charged HCPT-loaded Ch micelles were then co-assembled with positively charged LDH single-layer nanosheets, forming a HCPT/Ch intercalated LDH (HCPT-Ch-LDH) host-gest nanohybrid. The nanohybrid particles were further coated with liposomes (LSs), gaining a core-shell nanocomposite, denoted as (HCPT-Ch-LDH)@LS. The so-obtained samples were characterized using TEM, SAXS, FT-IR, DLS, and elemental analyses. Special emphasis was placed on the effect of liposome-coating for the HCPT-Ch-LDH on its water dispersity and drug-release. The results showed that the nanocomposite has excellent water dispersity and enhanced drug sustained-release performance in comparison with the HCPT-Ch-LDH, demonstrating that the liposome-coating for drug-LDH nanohybrids is an effective strategy to enhance their water dispersity and sustained-release performances. This work provides an effective strategy for engineering of LDH-based delivery systems for nonionic and lipophilic drugs.

  5. Steric effects in the dynamics of electrolytes at large applied voltages: I. Double-layer charging

    CERN Document Server

    Kilic, M S; Ajdari, A; Kilic, Mustafa Sabri; Bazant, Martin Z.; Ajdari, Armand

    2006-01-01

    The classical Poisson-Boltzmann (PB) theory of electrolytes assumes a dilute solution of point charges with mean-field electrostatic forces. Even for very dilute solutions, however, it predicts absurdly large ion concentrations (exceeding close packing) for surface potentials of only a few tenths of a volt, which are often exceeded, e.g. in microfluidic pumps and electrochemical sensors. Since the 1950s, several modifications of the PB equation have been proposed to account for the finite size of ions in equilibrium, but in this two-part series, we consider steric effects on diffuse charge dynamics (in the absence of electro-osmotic flow). In this first part, we review the literature and analyze two simple models for the charging of a thin double layer, which must form a condensed layer of close-packed ions near the surface at high voltage. A surprising prediction is that the differential capacitance typically varies non-monotonically with the applied voltage, and thus so does the response time of an electrol...

  6. A novel method to get methotrexatum/layered double hydroxides intercalation compounds and their release properties

    Science.gov (United States)

    Qi, Fenglin; Zhang, Xiaoqing; Li, Shuping

    2013-08-01

    In this context, the methotrexatum/layered double hydroxides (MTX/LDHs) intercalation compounds have been synthesized by a mechanochemical-hydrothermal method, which involves a grinding process and subsequent hydrothermal treatment. The influence of R (molar ratio of Mg2+ to Al3+ to MTX) values on the structure and morphology of the intercalation compounds and their release properties were investigated systematically. The resulting compounds were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), inductively coupled plasma (ICP), thermogravimetric (TG) and differential scanning calorimetry (DSC) analysis. All the results indicate that R value has significant influence on the intercalation of MTX anions into LDH interlayer and the optimal R value is 2:1:0.5. Furthermore, four dissolution-diffusion kinetic models were used to fit the in vitro release of MTX from LDH layers. The release process can be divided into two stages: firstly surface diffusion and secondly intraparticle diffusion. The study also revealed that the properties of the intercalation compounds is comparable to that obtained from standard methods such as co-precipitation method, but with time, solvent and energy saving.

  7. Synthesis and Characterization of Camptothecin Intercalated into Mg/AI Layered Double Hydroxide

    Institute of Scientific and Technical Information of China (English)

    LIU,Chun-Xia; HOU,Wan-Guo; LI,Yan; LI,Li-Fang

    2008-01-01

    The intercalation of camptothecin(CPT)into a layered inorganic host,Mg-Al layered double hydroxide(LDH),was carried out using a coprecipitation method tO obtain CPT-LDH nanohybrids.It Was found that the intercalated amounts(Ain)of CPrr-LDH nanohybrids were remarkably dependent on the molar ratios(Rc,M)of CPT tO metal ions in raw materials.The Ain value increases with the RC/M value increasing.According to the gallery heights of CPT-LDH and sizes of CPT molecule,a probably morphology of CPT molecules in the gallery of LDH was suggested that the horizontal-arranged monolayer and vertical-arranged bilayer of CPT molecules coexisted in the interlayer region of LDH.An interesting result was found that the gallery height corresponding to the bilayer of CPT-LDH sample with a high Ain value was remarkably Iower than that with low Ain value.111e/n vitro CPT release examinations from the nanohybrids showed that the CPT-LDH nanohybrids were a potential drug controlled release system.The kinetic analysis showed that the release kinetics of CPT from the nanohybrids obeyed the pseudo-first order kinetic model and the diffusion Of CPT through the LDH particle Of CPT played an important role in controlling the drug release rate.

  8. Synthesis and in situ mechanism of nuclei growth of layered double hydroxides

    Indian Academy of Sciences (India)

    H S Panda; R Srivastava; D Bahadur

    2011-12-01

    A host–guest material such as layered double hydroxide (LDH) has generated immense interest in current research due to its technological importance, whereby its dimension significantly affect its mechanical and other physical properties. The purpose of this study was to prepare Mg/Al-LDHs by systematically varying the molar concentration of cations, aging time and pH. The prepared LDHs were characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, thermal analysis and transmission electron microscopy to confirm their formation and morphology. We qualitatively observed a new growth route for LDH system which is dissimilar to the existing growth mechanism. The rate of growth is shown to be slower than the well known Ostwald ripening process. This unusual behaviour is due to the formation of effective passivation layer by Na+ ions around the generated LDHs nuclei. This suggested growth mechanism will be helpful in further controlling the particle size of other LDH, which may be useful for various future applications.

  9. Potential for Layered Double Hydroxides-Based, Innovative Drug Delivery Systems

    Directory of Open Access Journals (Sweden)

    Kai Zhang

    2014-04-01

    Full Text Available Layered Double Hydroxides (LDHs-based drug delivery systems have, for many years, shown great promises for the delivery of chemical therapeutics and bioactive molecules to mammalian cells in vitro and in vivo. This system offers high efficiency and drug loading density, as well as excellent protection of loaded molecules from undesired degradation. Toxicological studies have also found LDHs to be biocompatible compared with other widely used nanoparticles, such as iron oxide, silica, and single-walled carbon nanotubes. A plethora of bio-molecules have been reported to either attach to the surface of or intercalate into LDH materials through co-precipitation or anion-exchange reaction, including amino acid and peptides, ATPs, vitamins, and even polysaccharides. Recently, LDHs have been used for gene delivery of small molecular nucleic acids, such as antisense, oligonucleotides, PCR fragments, siRNA molecules or sheared genomic DNA. These nano-medicines have been applied to target cells or organs in gene therapeutic approaches. This review summarizes current progress of the development of LDHs nanoparticle drug carriers for nucleotides, anti-inflammatory, anti-cancer drugs and recent LDH application in medical research. Ground breaking studies will be highlighted and an outlook of the possible future progress proposed. It is hoped that the layered inorganic material will open up new frontier of research, leading to new nano-drugs in clinical applications.

  10. Potential for layered double hydroxides-based, innovative drug delivery systems.

    Science.gov (United States)

    Zhang, Kai; Xu, Zhi Ping; Lu, Ji; Tang, Zhi Yong; Zhao, Hui Jun; Good, David A; Wei, Ming Qian

    2014-01-01

    Layered Double Hydroxides (LDHs)-based drug delivery systems have, for many years, shown great promises for the delivery of chemical therapeutics and bioactive molecules to mammalian cells in vitro and in vivo. This system offers high efficiency and drug loading density, as well as excellent protection of loaded molecules from undesired degradation. Toxicological studies have also found LDHs to be biocompatible compared with other widely used nanoparticles, such as iron oxide, silica, and single-walled carbon nanotubes. A plethora of bio-molecules have been reported to either attach to the surface of or intercalate into LDH materials through co-precipitation or anion-exchange reaction, including amino acid and peptides, ATPs, vitamins, and even polysaccharides. Recently, LDHs have been used for gene delivery of small molecular nucleic acids, such as antisense, oligonucleotides, PCR fragments, siRNA molecules or sheared genomic DNA. These nano-medicines have been applied to target cells or organs in gene therapeutic approaches. This review summarizes current progress of the development of LDHs nanoparticle drug carriers for nucleotides, anti-inflammatory, anti-cancer drugs and recent LDH application in medical research. Ground breaking studies will be highlighted and an outlook of the possible future progress proposed. It is hoped that the layered inorganic material will open up new frontier of research, leading to new nano-drugs in clinical applications.

  11. Zn-Co layered double hydroxide modified hematite photoanode for enhanced photoelectrochemical water splitting

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Dongyu [State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620 (China); Rui, Yichuan [College of Chemistry and Chemical Engineering, Shanghai University of Engineering Science, Shanghai 201620 (China); Li, Yaogang [Engineering Research Center of Advanced Glasses Manufacturing Technology, MOE, Donghua University, Shanghai 201620 (China); Zhang, Qinghong, E-mail: zhangqh@dhu.edu.cn [State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620 (China); Engineering Research Center of Advanced Glasses Manufacturing Technology, MOE, Donghua University, Shanghai 201620 (China); Wang, Hongzhi, E-mail: wanghz@dhu.edu.cn [State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620 (China)

    2015-12-15

    Graphical abstract: - Highlights: • A facile way to fabricate earth-abundant α-Fe{sub 2}O{sub 3}/Zn-Co LDH composite photoanode via electrodeposition was presented. • The highest photocurrent 1.73 mA/cm{sup 2} at 1.23 V vs RHE was achieved by 60 s electrodeposition (i.e., 36% increment). • EIS indicated the enhanced charge transfer rate comes from improvement of water oxidation. - Abstract: Zinc-cobalt layered double hydroxide (LDH) was electrodeposited on Ti-doped hematite photoanodes for the first time, and a significant enhanced performance for photoelectrochemical water splitting was demonstrated over the composite photoanodes. Scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopy (EIS) were characterized with the resulted photoanodes. With the electrodepositing treatment, the photocurrent density increased from 1.27 mA/cm{sup 2} for pristine hematite to 1.73 mA/cm{sup 2} for modified materials at 1.23 V vs. RHE (i.e. 36% improvement). The photocurrent improvement is mainly attributed to a suppression of electron–hole recombination and reduced overpotential for water oxidation at the hematite-electrolyte interface due to the formation of Zn-Co LDH layer on hematite.

  12. Mg-Fe-mixed oxides derived from layered double hydroxides: A study of the surface properties

    Directory of Open Access Journals (Sweden)

    Marinković-Nedučin Radmila P.

    2011-01-01

    Full Text Available The influence of surface properties on the selectivity of the synthesized catalysts was studied, considering that their selectivity towards particular hydrocarbons is crucial for their overall activity in the chosen Fischer- -Tropsch reaction. Magnesium- and iron-containing layered double hydroxides (LDH, with the general formula: [Mg1-xFex(OH2](CO3x/2?mH2O, x = = n(Fe/(n(Mg+n(Fe, synthesized with different Mg/Fe ratio and their thermally derived mixed oxides were investigated. Magnesium was chosen because of its basic properties, whereas iron was selected due to its well-known high Fischer-Tropsch activity, redox properties and the ability to form specific active sites in the layered LDH structure required for catalytic application. The thermally less stable multiphase system (synthesized outside the optimal single LDH phase range with additional Fe-phase, having a lower content of surface acid and base active sites, a lower surface area and smaller fraction of smaller mesopores, showed higher selectivity in the Fischer-Tropsch reaction. The results of this study imply that the metastability of derived multiphase oxides structure has a greater influence on the formation of specific catalyst surface sites than other investigated surface properties.

  13. Osmotic pressure of ionic liquids in an electric double layer: Prediction based on a continuum model.

    Science.gov (United States)

    Moon, Gi Jong; Ahn, Myung Mo; Kang, In Seok

    2015-12-01

    An analysis has been performed for the osmotic pressure of ionic liquids in the electric double layer (EDL). By using the electromechanical approach, we first derive a differential equation that is valid for computing the osmotic pressure in the continuum limit of any incompressible fluid in EDL. Then a specific model for ionic liquids proposed by Bazant et al. [M. Z. Bazant, B. D. Storey, and A. A. Kornyshev, Phys. Rev. Lett. 106, 046102 (2011)] is adopted for more detailed computation of the osmotic pressure. Ionic liquids are characterized by the correlation and the steric effects of ions and their effects are analyzed. In the low voltage cases, the correlation effect is dominant and the problem becomes linear. For this low voltage limit, a closed form formula is derived for predicting the osmotic pressure in EDL with no overlapping. It is found that the osmotic pressure decreases as the correlation effect increases. The osmotic pressures at the nanoslit surface and nanoslit centerline are also obtained for the low voltage limit. For the cases of moderately high voltage with high correlation factor, approximate formulas are derived for estimating osmotic pressure values based on the concept of a condensed layer near the electrode. In order to corroborate the results predicted by analytical studies, the full nonlinear model has been solved numerically.

  14. Mg-Al layered double hydroxide-methotrexate nanohybrid drug delivery system: evaluation of efficacy.

    Science.gov (United States)

    Chakraborty, Jui; Roychowdhury, Susanta; Sengupta, Somoshree; Ghosh, Swapankumar

    2013-05-01

    Mg-Al layered double hydroxide nanoparticles were synthesized by one-pot co-precipitation method and anticancerous drug methotrexate was incorporated into it by in-situ ion exchange. The LDH-MTX nanohybrid produced moderately stable suspension in water, as predicted by zeta potential measurement. X-ray diffraction revealed that the basal spacing increased to nearly twice the same for pristine LDH on MTX intercalation. Thermogravimetric analyses confirmed an increase in thermal stability of the intercalated drug in the LDH framework. A striking enhancement in efficacy/sensitivity of MTX on the HCT-116 cells was obtained when intercalated within the LDH layers, as revealed by the attainment of half maximal inhibitory concentration of LDH-MTX nanohybrid by 48 h, whereas, bare MTX required 72 h for the same. The MTX release from MgAl-LDH-MTX hybrids in phosphate buffer saline at pH7.4 followed a relatively slow, first order kinetics and was complete within 8 days following diffusion and crystal dissolution mechanism.

  15. In Situ Hybridization of Pulp Fibers Using Mg-Al Layered Double Hydroxides

    Directory of Open Access Journals (Sweden)

    Carl-Erik Lange

    2015-04-01

    Full Text Available Inorganic Mg2+ and Al3+ containing layered double hydroxide (LDH particles were synthesised in situ from aqueous solution onto chemical pulp fibers of pine (Pinus sylvestris. High super saturated (hss solution with sodium carbonate produced LDH particles with an average diameter of 100–200 nm. Nano-size (70 nm LDH particles were found from fibers external surface and, to a lesser degree, from the S2 cell wall after synthesis via low super saturated (lss route. The synthesis via slow urea hydrolysis (Uhyd yielded micron and clay sized LDH (2–5 μm and enabled efficient fiber densification via mineralization of S2 fiber wall layer as indicated by TEM and compliance analysis. The Uhyd method decreased fiber compliance up to 50%. Reduction in the polymerisation degree of cellulose was observed with capillary viscometry. Thermogravimetric analysis showed that the hybridization with LDH reduced the exothermic heat, indicating, that this material can be incorporated in flame retardant applications. Fiber charge was assessed by Fibers 2015, 3 104 adsorption expermients with methylene blue (MB and metanil yellow (MY. Synthesis via lss route retained most of the fibres original charge and provided the highest capacity (10 μmol/g for anionic MY, indicating cationic character of hybrid fibers. Our results suggested that mineralized fibers can be potentially used in advanced applications such as biocomposites and adsorbent materials.

  16. Synthesis, structure and photocatalytic activity of calcined Mg-Al-Ti-layered double hydroxides

    Energy Technology Data Exchange (ETDEWEB)

    Hosni, Khaled; Abdelkarim, Omar; Srasra, Ezzeddine [Centre National des Recherches en Sciences des Matériaux (CNRSM), Soliman (Turkey); Frini-Srasra, Najoua [Faculté des Sciences de Tunis (FST), Tunis (Turkey)

    2015-01-15

    Mg-Al-Ti layered double hydroxides (LDH), consisting of di-, tri- and tetra-valent cations with different Al{sup 3+}/Ti{sup 4+} ratio, have been synthesized by co-precipitation which was demonstrated as efficient visible-light photocatalysts. The structure and chemical composition of the compound were characterized by PXRD, FT-IR, SAA, N{sub 2} adsorption-desorption isotherms, and DSC techniques. It is found that no hydrotalcites structure were formed for Ti{sup 4+}/(Ti{sup 4+}+ Al{sup 3+})>0.5 and the substitution of Ti(IV) for Al(III) in the layer increases the thermal stability of the resulting LDH materials. The calcined sample containing titanium showed relatively high adsorption capacity for MB as compared to that without titanium. Results show that the pseudo-second-order kinetic model and the Langmuir were found to correlate the experimental data well. The photocatalytic activity was evaluated for the degradation of the methylene blue. The photocatalytic activity increased with the increase of the Al/Ti cationic ratio. 71% of the dye could be removed by the Mg/Al/Ti-LDH with the cationic ratio Al/Ti=0 : 1 and calcined at 500 .deg. C.

  17. In situ dielectric measurements of Zn?Al layered double hydroxide with anionic nitrate ions

    Science.gov (United States)

    Ahmed, Abdullah Ahmed Ali; Talib, Zainal Abidin; Hussein, Mohd Zobir bin; Zakaria, Azmi

    2012-08-01

    Zn-Al-NO3-layered double hydroxide (Zn-Al-NO3-LDH) was prepared by the co-precipitation method with a ratio of Zn/Al = 4 and at a constant pH of 7. Powder XRD patterns showed the characteristic peaks of layered structure of the LDH sample. Thermogravimetric analysis (TGA) and infrared spectra of the sample were investigated. Because of the existence of water molecules and anionic NO3- in the interlayer of the LDH, the in situ dielectric spectroscopy of the LDH can be described by an anomalous low frequency dispersion using the second type of Universal Power Law. Novel measurements of activation energy of LDH have been obtained at five different frequencies. The energy value increased from 0.05 eV at 1 MHz to 0.37 eV at 134 Hz. The conductivity spectra of sample were studied as a function in temperature of the in situ measurements. The ionic conductivity (dc) of LDH increased as the in situ temperature increased.

  18. Target delivery and controlled release of the chemopreventive drug sulindac by using an advanced layered double hydroxide nanomatrix formulation system.

    Science.gov (United States)

    Minagawa, Keiji; Berber, Mohamed R; Hafez, Inas H; Mori, Takeshi; Tanaka, Masami

    2012-04-01

    Target delivery and controlled release of the chemopreventive drug sulindac that possesses low water solubility present a great challenge for its pharmaceutical industry. Here, we offered an advanced nanomatrix formulation system of sulindac based on layered double hydroxide materials. The X-ray analysis and infrared spectroscopy confirmed the incorporation of sulindac into the gallery of the layered double hydroxides. The incorporation ratios of sulindac were recorded to be 45, 31 and 20 for coprecipitation, anion-exchange and reconstruction techniques, respectively. The scanning electron microscopy showed a nanomatrix-structure of ~50 nm. The release studies of sulindac-nanomatrix showed a 96% controlled release at the small intestine solution during 3 h(s), indicating an enhancement in the dissolution profile of sulindac after the matrix formation. The layered structure of the matrix supplied sulindac with a well-ordered structure and a relatively hydrophobic microenvironment that controlled the guest hydrolysis and reactivity during the release process. The laminar structure of layered double hydroxides offered a safe preservation for sulindac against photodecarboxylation, and enhanced the drug thermal stability from 190 to 230° C. The ionic electrostatic interaction of sulindac through its acidic group with layered double hydroxides demolished the gastrointestinal ulceration.

  19. The effect of the ferromagnetic metal layer on tunnelling conductance and magnetoresistance in double magnetic planar junctions

    Institute of Scientific and Technical Information of China (English)

    谢征微; 李伯臧; 李玉现

    2002-01-01

    Based on the free-electron approximation, we investigate the effect of the ferromagnetic metal layer on the tunnelling magnetoresistance (TMR) and tunnelling conductance (TC) in the double magnetic tunnel junctions (DMTJs)of the structure NM/FM/Ⅰ(S)/NM/Ⅰ(S)/FM/NM, where FM, NM and Ⅰ(S) represent the ferromagnetic metal, nonmagnetic metal and insulator (semiconductor), respectively. The FM, Ⅰ(S) and inner NM layers are of finite thickness,while the thickness of the outer NM layer is infinite. The calculated results show that, due to the spin-dependent interfacial potential barriers caused by electronic band mismatch between the various magnetic and nonmagnetic layers,the dependences of the TMR and TC on the thicknesses of the FM layers exhibit oscillations, and a much higher TMR can be obtained for suitable thicknesses of FM layers.

  20. Double-layered TiO2-SiO2 nanostructured films with self-cleaning and antireflective properties.

    Science.gov (United States)

    Zhang, Xintong; Fujishima, Akira; Jin, Ming; Emeline, Alexei V; Murakami, Taketoshi

    2006-12-21

    Dual function of self-cleaning and antireflection can be created in double-layered TiO2-SiO2 nanostructured films. The film were prepared by (1) layer-by-layer deposition of multilayered SiO2 nanoparticles with polydiallyldimethylammonium (PDDA) cations, (2) layer-by-layer deposition of multilayered titanate nanosheets with polications on PDDA/SiO2 multilayer films, and (3) burning out the polymer and converting titanate nanosheets into TiO2 by hearing at 500 degrees C. The as-prepared films, consisting of a porous SiO2 bottom layer and a dense TiO2 top layer, improved the transmittance of glass or quartz substrates, as demonstrated by transmission spectra collected at normal incidence. The photocatalytic properties of the films were studied by the change of the water contact angle together with the decay of the IR absorption of the hydrocarbon chain of octadecylphosphonic-acid-modified films under 2.6 mW cm-2 UV illumination. Both the antireflective and the photocatalytic properties of the films were dependent on the number of PDDA/nanosheet bilayers deposited. however, excellent surface wettability of the films for water was obtained, independent of the preparation conditions. The experimental findings are discussed in terms of the special structure of the double-layered nanostructured film.

  1. Highly stable layered double hydroxide colloids: a direct aqueous synthesis route from hybrid polyion complex micelles.

    Science.gov (United States)

    Layrac, Géraldine; Destarac, Mathias; Gérardin, Corine; Tichit, Didier

    2014-08-19

    Aqueous suspensions of highly stable Mg/Al layered double hydroxide (LDH) nanoparticles were obtained via a direct and fully colloidal route using asymmetric poly(acrylic acid)-b-poly(acrylamide) (PAA-b-PAM) double hydrophilic block copolymers (DHBCs) as growth and stabilizing agents. We showed that hybrid polyion complex (HPIC) micelles constituted of almost only Al(3+) were first formed when mixing solutions of Mg(2+) and Al(3+) cations and PAA3000-b-PAM10000 due to the preferential complexation of the trivalent cations. Then mineralization performed by progressive hydroxylation with NaOH transformed the simple DHBC/Al(3+) HPIC micelles into DHBC/aluminum hydroxide colloids, in which Mg(2+) ions were progressively introduced upon further hydroxylation leading to the Mg-Al LDH phase. The whole process of LDH formation occurred then within the confined environment of the aqueous complex colloids. The hydrodynamic diameter of the DHBC/LDH colloids could be controlled: it decreased from 530 nm down to 60 nm when the metal complexing ratio R (R = AA/(Mg + Al)) increased from 0.27 to 1. This was accompanied by a decrease of the average size of individual LDH particles as R increased (for example from 35 nm at R = 0.27 down to 17 nm at R = 0.33), together with a progressive favored intercalation of polyacrylate rather than chloride ions in the interlayer space of the LDH phase. The DHBC/LDH colloids have interesting properties for biomedical applications, that is, high colloidal stability as a function of time, stability in phosphate buffered saline solution, as well as the required size distribution for sterilization by filtration. Therefore, they could be used as colloidal drug delivery systems, especially for hydrosoluble negatively charged drugs.

  2. Variable Charge and Electrical Double Layer of Mineral-Water Interfaces: Silver Halides versus Metal (Hydr)Oxides

    NARCIS (Netherlands)

    Hiemstra, T.

    2012-01-01

    Classically, silver (Ag) halides have been used to understand thermodynamic principles of the charging process and the corresponding development of the electrical double layer (EDL). A mechanistic approach to the processes on the molecular level has not yet been carried out using advanced surface co

  3. Folic acid conjugated self-assembled layered double hydroxide nanoparticles for high-efficacy-targeted drug delivery.

    Science.gov (United States)

    Yan, Li; Chen, Wei; Zhu, Xiaoyue; Huang, Longbiao; Wang, Zhigang; Zhu, Guangyu; Roy, V A L; Yu, K N; Chen, Xianfeng

    2013-12-04

    Enhanced selectivity and efficacy is important for advanced drug delivery. Herein, a novel type of folic acid conjugated self-assembled layered double hydroxide nanoparticles is reported. These nanoparticles have a drug loading capacity of 27 wt% and are able to enter cell nuclei and dramatically improve the efficacy of MTX.

  4. Evidence of double layer/capacitive charging in carbon nanomaterial-based solid contact polymeric ion-selective electrodes.

    Science.gov (United States)

    Cuartero, Maria; Bishop, Josiah; Walker, Raymart; Acres, Robert G; Bakker, Eric; De Marco, Roland; Crespo, Gaston A

    2016-08-11

    This paper presents the first direct spectroscopic evidence for double layer or capacitive charging of carbon nanomaterial-based solid contacts in all-solid-state polymeric ion-selective electrodes (ISEs). Here, we used synchrotron radiation-X-ray photoelectron spectroscopy (SR-XPS) and SR valence band (VB) spectroscopy in the elucidation of the charging mechanism of the SCs.

  5. Reel-to-reel deposition of epitaxial double-sided MgO buffer layers for coated conductors

    Energy Technology Data Exchange (ETDEWEB)

    Xue, Yan, E-mail: xueyanuestc@126.com [State Key Laboratory of Electronic Thin Film and Integrated Devices, University of Electronic Science and Technology of China, Chengdu 610054 (China); Xiong, Jie, E-mail: jiexiong@uestc.edu.cn [State Key Laboratory of Electronic Thin Film and Integrated Devices, University of Electronic Science and Technology of China, Chengdu 610054 (China); Zhang, Yahui; Zhang, Fei; Zhao, Rui-Peng [State Key Laboratory of Electronic Thin Film and Integrated Devices, University of Electronic Science and Technology of China, Chengdu 610054 (China); Hui, Wang; Wang, Quiling [Applied Research Laboratory of Superconduction and New Material, Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Cheng, Guo; Zhao, Xiao-Hui; Tao, Bo-Wan [State Key Laboratory of Electronic Thin Film and Integrated Devices, University of Electronic Science and Technology of China, Chengdu 610054 (China)

    2016-06-15

    Highlights: • Growth of biaxially textured MgO films on flexible substrates. • Double-sided IBAD buffer template for the first time. • Studying the influence of ion energy and film thickness on the texture. • Demonstrating double-sided YBCO films with overall critical current of 300 A/cm. - Abstract: We have successfully employed a double-sided process to deposit MgO buffer layers on both sides of amorphous Y{sub 2}O{sub 3} surface for double-sided YBa{sub 2}Cu{sub 3}O{sub 7−δ} (YBCO) coated conductors (CCs) for the first time, the structure of which is of great prospect to improve the performance and cut the production cost. The biaxial textures of MgO buffer layer are noticeably affected by the ion energy and film thickness, which is demonstrated by X-ray diffraction. The best biaxial texture of double-sided MgO films shows ω-scan of (002) MgO and Φ-scan of (220) MgO yield full width at half maximum values of 4° and 7.8° for one side, respectively, as well as 3.5° and 6.7° for the other side. The subsequent double-sided YBCO films are deposited on the as-prepared MgO template with entire critical current of over 300 A/cm for both sides.

  6. INTER-LAYER INTERACTION IN DOUBLE-WALLED CARBON NANOTUBES EVIDENCED BY SCANNING TUNNELING MICROSCOPY AND SPECTROSCOPY

    DEFF Research Database (Denmark)

    Giusca, Cristina E; Tison, Yann; Silva, S. Ravi P.

    2008-01-01

    Scanning Tunneling Microscopy and Spectroscopy have been used in an attempt to elucidate the electronic structure of nanotube systems containing two constituent shells. Evidence for modified electronic structure due to the inter-layer interaction in double-walled carbon nanotubes is provided...... and the overall electronic structure for double-walled carbon nanotubes, is demonstrated by our experiments, showing that the effect the inner tube has on the overall electronic structure of double-walled nanotubes cannot be neglected, and is key to the opto-electronic properties of the system. We postulate...... that previous analysis of the opto-electronic properties on multiple-walled carbon nanotubes based purely on the outer layer chirality of the tube needs significant modification based on new understanding brought forth with our analysis....

  7. On the theory of electric double layer with explicit account of a polarizable co-solvent.

    Science.gov (United States)

    Budkov, Yu A; Kolesnikov, A L; Kiselev, M G

    2016-05-14

    We present a continuation of our theoretical research into the influence of co-solvent polarizability on a differential capacitance of the electric double layer. We formulate a modified Poisson-Boltzmann theory, using the formalism of density functional approach on the level of local density approximation taking into account the electrostatic interactions of ions and co-solvent molecules as well as their excluded volume. We derive the modified Poisson-Boltzmann equation, considering the three-component symmetric lattice gas model as a reference system and minimizing the grand thermodynamic potential with respect to the electrostatic potential. We apply present modified Poisson-Boltzmann equation to the electric double layer theory, showing that accounting for the excluded volume of co-solvent molecules and ions slightly changes the main result of our previous simplified theory. Namely, in the case of small co-solvent polarizability with its increase under the enough small surface potentials of electrode, the differential capacitance undergoes the significant growth. Oppositely, when the surface potential exceeds some threshold value (which is slightly smaller than the saturation potential), the increase in the co-solvent polarizability results in a differential capacitance decrease. However, when the co-solvent polarizability exceeds some threshold value, its increase generates a considerable enhancement of the differential capacitance in a wide range of surface potentials. We demonstrate that two qualitatively different behaviors of the differential capacitance are related to the depletion and adsorption of co-solvent molecules at the charged electrode. We show that an additive of the strongly polarizable co-solvent to an electrolyte solution can shift significantly the saturation potential in two qualitatively different manners. Namely, a small additive of strongly polarizable co-solvent results in a shift of saturation potential to higher surface potentials. On

  8. Photocatalytic property and structural stability of CuAl-based layered double hydroxides

    Energy Technology Data Exchange (ETDEWEB)

    Lv, Ming; Liu, Haiqiang, E-mail: Liuhaiqiang1980@126.com

    2015-07-15

    Three types of CuMAl layered double hydroxides (LDHs, M=Mg, Zn, Ni) were successfully synthesized by coprecipitation. Powder X-ray diffraction (XRD), inductively coupled plasma atomic emission spectrometry (ICP-AES) and UV–Vis diffuse reflectance spectrum (UV–vis) were used to confirm the formation of as-synthesized solids with good crystal structure. The photocatalytic activity of those LDH materials for CO{sub 2} reduction under visible light was investigated. The experimental results show that CuNiAl-LDHs with narrowest band gap and largest surface areas behave highest efficiency for methanol generation under visible light compared with CuMgAl-LDHs and CuZnAl-LDHs. The CuNiAL-LDH showed high yield for methanol production i.e. 0.210 mmol/g h, which was high efficient. In addition, the influence of the different M{sup 2+} on the structures and stability of the CuMAl-LDHs was also investigated by analyzing the geometric parameters, electronic arrangement, charge populations, hydrogen-bonding, and binding energies by density functional theory (DFT) analysis. The theoretical calculation results show that the chemical stability of LDH materials followed the order of CuMgAl-LDHs>CuZnAl-LDHs>CuNiAl-LDHs, which is just opposite with the photocatalytic activity and band gaps of three materials. - Graphical abstract: The host–guest calculation models and XRD patterns of CuMAl-LDHs: CuMgAl-LDHs (a), CuZnAl-LDHs (b) and CuNiAl-LDHs (c). - Highlights: • Three types of CuMAl layered double hydroxides (LDHs, M=Mg, Zn, Ni) has been synthesized. • CuMgNi shows narrower band gap and more excellent textural properties than other LDHs. • The band gap: CuMgAl

  9. Electrospun fibers of layered double hydroxide/biopolymer nanocomposites as effective drug delivery systems

    Energy Technology Data Exchange (ETDEWEB)

    Miao, Yue-E.; Zhu Hong; Chen Dan; Wang Ruiyu [State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai 200433 (China); Tjiu, Weng Weei [Institute of Materials Research and Engineering, A-STAR (Agency for Science, Technology and Research), 3 Research Link, Singapore 117602 (Singapore); Liu Tianxi, E-mail: txliu@fudan.edu.cn [State Key Laboratory of Molecular Engineering of Polymers, Department of Macromolecular Science, Fudan University, Shanghai 200433 (China)

    2012-06-15

    Ibuprofen intercalated layered double hydroxide (LDH-IBU)/polycaprolactone (PCL) and LDH-IBU/polylactide (PLA) nanocomposite fibers are electrospun based on a combination of LDH-IBU with two kinds of biopolymers (i.e. PCL and PLA), to act as effective drug delivery systems. Ibuprofen (IBU) is chosen as a model drug, which is intercalated in MgAl-LDH by coprecipitation. Poly(oxyethylene-b-oxypropylene-b-oxyethylene) (Pluronic) is also added into PLA-based fibers as hydrophilicity enhancer and release modulator. LDH-IBU nanoparticles are uniformly dispersed throughout the nanocomposite fibers, as evidenced by transmission electron microscopy (TEM) observations. In vitro drug release studies show that initial IBU liberation from LDH-IBU/PCL composite fibers is remarkably slower than that from IBU/PCL fibers due to the sustained release property of LDH-IBU and heterogeneous nucleation effect of LDH-IBU on PCL chain segments. Surprisingly, the initial IBU release from LDH-IBU/PLA and LDH-IBU/PLA/Pluronic composite fibers is faster than that from the corresponding IBU/PLA and IBU/PLA/Pluronic fibers. This effect can be attributed to the strong interaction between alkyl groups in IBU molecules and methyl substituent groups of PLA as well as the hydrophilicity of LDH-IBU, which lead to an easier diffusion of water with a faster release of IBU from LDH-IBU/PLA and LDH-IBU/PLA/Pluronic composite fibers. - Graphical abstract: Ibuprofen intercalated layered double hydroxide (LDH-IBU)/polycaprolactone (PCL) and LDH-IBU/polylactide (PLA) nanocomposite fibers are electrospun based on the combination of LDHs with two kinds of biopolymers (i.e. PCL and PLA). LDH-IBU nanoparticles are uniformly dispersed throughout all the electrospun nanocomposite fibers even at a high loading level of 5 wt%. By combining the tunable drug release property of LDHs and electrospinning technique, the new drug delivery system is anticipated for effective loading and sustained release of drugs

  10. Methotrexatum intercalated layered double hydroxides: Statistical design, mechanism explore and bioassay study

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Xiao-Feng [Department of Gastroenterology, Weihai municipal hospital, Weihai 264200 (China); Liu, Su-Qing [Jiangsu Key Laboratory of Biofunctional Material, College of Chemistry and Material Science, Nanjing Normal University, Nanjing 210023 (China); Li, Shu-Ping, E-mail: lishuping@njnu.edu.cn [Jiangsu Key Laboratory of Biofunctional Material, College of Chemistry and Material Science, Nanjing Normal University, Nanjing 210023 (China)

    2015-04-01

    A series of methotrexatum intercalated layered double hydroxide (MTX/LDH for short) hybrids have been synthesized by a mechanochemical–hydrothermal method, the statistical experiments are planned and conducted to find out the critical factor influencing the physicochemical properties. Four variables, i.e., addition of NaOH solution, grinding duration, hydrothermal temperature and time, are chosen to play as the examined factors in the orthogonal design. Furthermore, three respective levels, i.e., high, medium and low levels, are conducted in the design. The resulting hybrids are then characterized by X-ray diffraction (XRD) patterns, transmission electron microscope (TEM) graphs and Zeta potentials. XRD diffractions indicate that MTX anions have been successfully intercalated into LDH interlayers and the amount of NaOH solution can change the gallery height greatly. The information from TEM graphs and Zeta potentials state that the increase of alkali solution gives rise to regular morphology and the increase of Zeta potentials. As a result of the statistical analysis, addition of alkali solution is the major factor affecting the morphology and drug-loading capacity. At last, the mechanism of particle growth is explored emphatically, and the anticancer efficacy of some MTX/LDH hybrids is estimated by MTT assay on A549 cells as well. - Graphical abstract: Schematic illustration of synthesis and properties of MTX intercalated LDH hybrids. - Highlights: • Increasing NaOH solution gives rise to high drug-loading capacity. • Increasing the alkali solution leads to high layer charge and regular morphology. • The monodispersity has critical effect on the tumor suppression efficiency.

  11. Layered double hydroxide catalyst for the conversion of crude vegetable oils to a sustainable biofuel

    Science.gov (United States)

    Mollaeian, Keyvan

    Over the last two decades, the U.S. has developed the production of biodiesel, a mixture of fatty acid methyl esters, using chiefly vegetable oils as feedstocks. However, there is much concern about the availability of high-quality vegetable oils for longterm biodiesel production. Problems have also risen due to the production of glycerol, an unwanted byproduct, as well as the need for process wash water. Therefore, this study was initiated to produce not only fatty acid methyl esters (FAMEs) but also fatty acid glycerol carbonates (FAGCs) by replacing methanol with dimethyl carbonate (DMC). The process would have no unnecessary byproducts and would be a simplified process compared to traditional biodiesel. In addition, this altering of the methylating agent could convert triglycerides, free fatty acids, and phospholipids to a sustainable biofuel. In this project, Mg-Al Layered Double Hydroxide (LDH) was optimized by calcination in different temperature varied from 250°C to 450°C. The gallery between layers was increased by intercalating sodium dodecylsulfate (SDS). During catalyst preparation, the pH was controlled ~10. In our experiment, triazabicyclodecene (TBD) was attached with trimethoxysilane (3GPS) as a coupling agent, and N-cetyl-N,N,N-trimethylammonium bromide (CTAB) was added to remove SDS from the catalyst. The catalyst was characterized by XRD, FTIR, and Raman spectroscopy. The effect of the heterogeneous catalyst on the conversion of canola oil, corn oil, and free fatty acids was investigated. To analyze the conversion of lipid oils to biofuel an in situ Raman spectroscopic method was developed. Catalyst synthesis methods and a proposed mechanism for converting triglycerides and free fatty acids to biofuel will be presented.

  12. Synthesis of protocatechuic acid–zinc/aluminium–layered double hydroxide nanocomposite as an anticancer nanodelivery system

    Energy Technology Data Exchange (ETDEWEB)

    Barahuie, Farahnaz [Materials Synthesis and Characterisation Laboratory, Institute of Advanced Technology (ITMA), Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor (Malaysia); Hussein, Mohd Zobir, E-mail: mzobir@upm.edu.my [Materials Synthesis and Characterisation Laboratory, Institute of Advanced Technology (ITMA), Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor (Malaysia); Gani, Shafinaz Abd [Department of Biochemistry, Faculty of Biotechnology and Biomolecular Sciences, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor (Malaysia); Laboratory of Vaccines and Immunotherapeutics, Institute of Bioscience, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor (Malaysia); Fakurazi, Sharida [Laboratory of Vaccines and Immunotherapeutics, Institute of Bioscience, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor (Malaysia); Department of Human Anatomy, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor (Malaysia); Zainal, Zulkarnain [Materials Synthesis and Characterisation Laboratory, Institute of Advanced Technology (ITMA), Universiti Putra Malaysia, 43400 UPM, Serdang, Selangor (Malaysia)

    2015-01-15

    Protocatechuic acid, an active anticancer agent, has been intercalated into Zn/Al–layered double hydroxide at Zn/Al=2) using two different preparation methods, co-precipitation and ion-exchange, which are labelled as PZAE and PZAC, respectively. The release of protocatechuate from the nanocomposites occurred in a controlled manner and was fitted satisfactorily to pseudo-second order kinetics. The basal spacing of the resulting nanocomposites PZAE and PZAC was 10.2 and 11.0 Å, respectively, indicating successful intercalation of protocatechuate anions into the interlayer galleries of Zn/Al–NO{sub 3}–LDH in a monolayer arrangement with angles of 24 and 33° from the z-axis in PZAE and PZAC, respectively. The formation of nanocomposites was further confirmed by a Fourier transform infrared study. Thermogravimetric and differential thermogravimetric analyses indicated that the thermal stability of the intercalated protocatechuic acid was significantly enhanced compared to its free protocatechuic acid, and the drug content in the nanocomposites was estimated to be approximately 32.6% in PZAE and 29.2% in PZAC. Both PZAE and PZAC nanocomposites inhibit the growth of human cervical, liver and colorectal cancer cell lines and exhibit no toxic effects towards normal fibroblast 3T3 cell after 72 h of treatment. - Graphical abstract: Protocatechuate anions were arranged in monolayer mode with the angle of 24° for PZAE and 33° for PZAC from Z axis to maximize interaction between carboxylate groups and brucite-like layers. - Highlights: • Two methods gave nanocomposites with slightly different physico-chemical properties. • PZAE and PZAC have the potential to be used as a controlled release formulation. • The thermal stability of PA is markedly enhanced upon the intercalation process. • Higher cancer cell growth inhibition for PZAE and PZAC nanocomposites than for PA.

  13. Use of layered double hydroxides and their derivatives as adsorbents for inorganic and organic pollutants

    Science.gov (United States)

    You, Youwen

    Contamination of surface and groundwaters by hazardous inorganic and organic pollutants has become an increasing threat to the safety of drinking waters. Cleanup of contaminated surface and groundwaters has, therefore, become a major focus of environmental research. Primary objectives of this dissertation study were to examine the adsorption properties of layered double hydroxides (LDHs) and their derivatives for inorganic and organic contaminants and to identify potential technologies that utilize LDHs and their derivatives for environment remediation. Studies examined the adsorption characteristics of anionic selenium, arsenic and dicamba (3,6 dichloro-2-methoxy benzoic acid) on original LDHs and calcined-LDHs. Adsorption of selenium and arsenic on LDHs was a function of pH. Competing anions in solution strongly affected adsorption of all three contaminants, with divalent anions decreasing adsorption more intensely than monovalent anions. Adsorbed selenium, arsenic and dicamba could be released from LDHs in anion solutions. Adsorption isotherms for selenium and arsenic retention could be fitted to a simple Langmuir equation. Calcination processes significantly increased adsorption capacities of LDHs. Because of adsorption-desorpion characteristics, LDHs could be recycled. X-ray diffraction patterns revealed an increase of d-spacing coupling with adsorption of contaminants, verifying the intercalation of contaminants into layer structure of LDHs. Long chain anionic surfactants intercalated into LDHs modified their surface properties, resulting in organo-LDHs with hydrophobic surface properties. Various organo-LDHs were developed by incorporating different surfactants into LDHs via different synthesis methods. Surfactant intercalation properties were examined and the geometrical arrangements of the intercalated surfactants were characterized. Results revealed that surfactant molecules could adopt various configurations within the LDH interlayer space. Intercalation

  14. Efficient defluoridation of water using reusable nanocrystalline layered double hydroxides impregnated polystyrene anion exchanger.

    Science.gov (United States)

    Cai, Jianguo; Zhang, Yanyang; Pan, Bingcai; Zhang, Weiming; Lv, Lu; Zhang, Quanxing

    2016-10-01

    Water decontamination from fluoride is still a challenging task of global concern. Recently, Al-based layered double hydroxides (LDHs) have been extensively studied for specific fluoride adsorption from water. Unfortunately, they cannot be readily applied in scaled-up application due to their ultrafine particles as well as the regeneration issues caused by their poor stability at alkaline pHs. Here, we developed a novel (LDH)-based hybrid adsorbent, i.e., LALDH-201, by impregnating nanocrystalline Li/Al LDHs (LADLH) inside a commercial polystyrene anion exchanger D201. TEM image and XRD spectra of the resultant nanocomposite confirmed that the LDHs particles were nanosized inside the pores of D201 of highly crystalline nature and well-ordered layer structure. After impregnation, the chemical and mechanical stability of LALDH were significantly improved against pH variation, facilitating its application at a wide pH range (3.5-12). Fluoride adsorption onto LALDH-201 was compared to D201 and activated alumina, evidencing the preferable removal fluoride of LALDH-201. Fluoride adsorption onto LALDH-201 followed pseudo-second-order model, with the maximum capacity (62.5 mg/g from the Sips model) much higher than the other two adsorbents. Fixed-bed adsorption run indicated the qualified treatable volume of the fluoride contaminated groundwater (4.1 mg/L initially) with LALDH-201 was about 11 times as much as with the anion exchanger D201 when the breakthrough point was set as 1.5 mg/L. The capacity of LALDH-201 could be effectively refreshed for continuous column operation without observable loss by using the mixed solution of 0.01 M NaOH + 1 M NaCl. The above results suggested that the hybrid adsorbent LALDH-201 is very promising for water defluoridation in scaled-up application.

  15. [Role of layered double hydroxide (LDH) in the protection of herring testis DNA from heavy metals].

    Science.gov (United States)

    Tang, Yi-Ni; Wu, Ping-Xiao; Zhu, Neng-Wu

    2012-10-01

    The role of layered double hydroxide (LDH) in the protection of herring testis DNA from heavy metals Cd2+ and Pb2+ was studied by X-ray diffraction ( XRD) spectra, Fourier transform infrared (FTIR) spectra, Scanning Electron Microscopy (SEM), Cyclic Voltammetry and Ultraviolet Spectrometry. Size expansion of the basal spacing (003) from 0. 76 nm in LDH to 2. 30 nm was observed in the resulting DNA-LDH nanohybrids and it gave peaks corresponding to C=O (1 534 cm(-1) and 1488 cm(-1)) in skeleton and bases, C-O stretching vibration (1228 cm(-1)), and P-O symmetrical stretching vibration (1096 cm(-1)) in functional groups of DNA, indicating that DNA were intercalated into the LDH by the ion exchange. However, the displacement of NO3(-) was not fully complete (partial intercalation of DNA). The DNA outside LDH interlayers was absorbed on the surface of LDH. The cyclic voltammetric curves showed that DNA in the composites exhibited a very similar peaks, which corresponded to the two reduction current peaks (E(P) = - 1.2 mV and E(P) = -2.4 mV) of free DNA. Also there was no cathode sag emerging in cyclic voltammetric curves, suggesting that both Cd2+ and Pb2+ cannot insert into the groove of DNA to associate with base pairs or other groups when DNA was bound on LDH. The results showed that, on the one hand, both Cd2+ and Pb2+ were absorbed on the external surface of LDH for immobilization, on the other hand, the layer of LDH provided ideal space for DNA by the action of protecting DNA molecules from Cd2+ and Pb2+.

  16. Enhanced absorption properties of ordered mesoporous carbon/Co-doped ordered mesoporous carbon double-layer absorbers

    Science.gov (United States)

    Guo, Shao-Li; Wang, Liu-Ding; Wang, Yi-Ming; Wu, Hong-Jing; Shen, Zhong-Yuan

    2013-04-01

    Ordered mesoporous carbon (OMC) and metal-doped (M-doped) OMC composites are prepared, and their electromagnetic (EM) parameters are measured. Using the measured EM parameters we calculate the EM wave absorption properties of a double-layer absorber, which is composed of OMC as an absorbing layer and M-doped OMC as the matching layer. The calculated results show that the EM wave absorption performance of OMC/OMC—Co (2.2 mm/2.1 mm) is improved remarkably. The obtained effective absorption bandwidth is up to 10.3 GHz and the minimum reflection loss reaches -47.6 dB at 14.3 GHz. The enhanced absorption property of OMC/OMC—Co can be attributed to the impedance match between the air and the absorber. Moreover, it can be found that for the absorber with a given matching layer, a larger value of Δtanδɛ(= tanδ69 absorbing - tanδɛ matching) can induce better absorption performance, indicating that the difference in impedance between the absorbing layer and the matching layer plays an important role in improving the absorption property of double-layer absorbers.

  17. Enhanced absorption properties of ordered mesoporous carbon/Co-doped ordered mesoporous carbon double-layer absorbers

    Institute of Scientific and Technical Information of China (English)

    Guo Shao-Li; Wang Liu-Ding; Wang Yi-Ming; Wu Hong-Jing; Shen Zhong-Yuan

    2013-01-01

    Ordered mesoporous carbon (OMC) and metal-doped (M-doped) OMC composites are prepared,and their electromagnetic (EM) parameters are measured.Using the measured EM parameters we calculate the EM wave absorption properties of a double-layer absorber,which is composed of OMC as an absorbing layer and M-doped OMC as the matching layer.The calculated results show that the EM wave absorption performance of OMC/OMC-Co (2.2 mm/2.1 mm) is improved remarkably.The obtained effective absorption bandwidth is up to 10.3 GHz and the minimum reflection loss reaches -47.6 dB at 14.3 GHz.The enhanced absorption property of OMC/OMC-Co can be attributed to the impedance match between the air and the absorber.Moreover,it can be found that for the absorber with a given matching layer,a larger value of △tanδε (=tan δε absorbing--tan δε matching) can induce better absorption performance,indicating that the difference in impedance between the absorbing layer and the matching layer plays an important role in improving the absorption property of double-layer absorbers.

  18. Absorption enhancement in thin film a-Si solar cells with double-sided SiO2 particle layers

    Institute of Scientific and Technical Information of China (English)

    陈乐; 王庆康; 沈向前; 陈文; 黄堃; 刘代明

    2015-01-01

    Light absorption enhancement is very important for improving the power conversion efficiency of a thin film a-Si solar cell. In this paper, a thin-film a-Si solar cell model with double-sided SiO2 particle layers is designed, and then the underlying mechanism of absorption enhancement is investigated by finite difference time domain (FDTD) simulation;finally the feasible experimental scheme for preparing the SiO2 particle layer is discussed. It is found that the top and bottom SiO2 particle layers play an important role in anti-reflection and light trapping, respectively. The light absorption of the cell with double-sided SiO2 layers greatly increases in a wavelength range of 300 nm–800 nm, and the ultimate efficiency increases more than 22%compared with that of the flat device. The cell model with double-sided SiO2 particle layers reported here can be used in varieties of thin film solar cells to further improve their performances.

  19. Optimization of SiNx Single and Double Layer ARC for Silicon Thin Film Solar Cells on Glass

    Directory of Open Access Journals (Sweden)

    M. Beye

    2013-06-01

    Full Text Available The aim of this study is the optimization of the antireflection effect of SiN in silicon on glass based structure. A numerical calculation is performed and a SiNx double stack antireflection coating is found to have significant advantages over single-layer due to their broad-range coverage of the solar spectrum. Moreover, it was found that minimum reflection losses is obtained for SiN/SiN double-layer ARC with refractive indexes of 1.9 et 2.3 for the top and the bottom layer, respectively. The effect of the incident angle on reflectance is also studied. The numerical optimization procedure and its results are presented.

  20. FTRIFS biosensor based on double layer porous silicon as a LC detector for target molecule screening from complex samples.

    Science.gov (United States)

    Shang, Yunling; Zhao, Weijie; Xu, Erchao; Tong, Changlun; Wu, Jianmin

    2010-01-15

    Post-column identification of target compounds in complex samples is one of the major tasks in drug screening and discovery. In this work, we demonstrated that double layer porous silicon (PSi) attached with affinity ligand could serve as a sensing element for post-column detection of target molecule by Fourier transformed reflectometric interference spectroscopy (FTRIFS), in which trypsin and its inhibitor were used as the model probe-target system. The double layer porous silicon was prepared by electrical etching with a current density of 500 mA/cm(2), followed by 167 mA/cm(2). Optical measurements indicated that trypsin could infiltrate into the outer porous layer (porosity 83.6%), but was excluded by the bottom layer (porosity 52%). The outer layer, attached with trypsin by standard amino-silane and glutaraldehyde chemistry, could specifically bind with the trypsin inhibitor, acting as a sample channel, while the bottom layer served as a reference signal channel. The binding event between the attached trypsin and trypsin inhibitor samples could be detected by FTRIFS in real-time through monitoring the optical thickness change of the porous silicon layer. The baseline drift caused by sample matrix variation could be effectively eliminated by a signal correction method. Optical signals had a linear relationship with the concentration of trypsin inhibitor in the range of 10-200 ng mL(-1). The FTRIFS biosensor based on double layer porous silicon could be combined with a UV detector for screening the target molecule from complex component mixtures separated by a LC column. Using an LC-UV-FTRIFS system, a fraction containing a trypsin inhibitor could be separated from a soybean extract sample and identified in real-time.