WorldWideScience

Sample records for non-lte gold plasmas

  1. Non-LTE Radiation Transport in High Radiation Plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Scott, H A

    2005-01-07

    A primary goal of numerical radiation transport is obtaining a self-consistent solution for both the radiation field and plasma properties. Obtaining such a solution requires consideration of the coupling between the radiation and the plasma. The different characteristics of this coupling for continuum and line radiation have resulted in two separate sub-disciplines of radiation transport with distinct emphases and computational techniques. LTE radiation transfer focuses on energy transport and exchange through broadband radiation, primarily affecting temperature and ionization balance. Non-LTE line transfer focuses on narrowband radiation and the response of individual level populations, primarily affecting spectral properties. Many high energy density applications, particularly those with high-Z materials, incorporate characteristics of both these regimes. Applications with large radiation fields including strong line components require a non-LTE broadband treatment of energy transport and exchange. We discuss these issues and present a radiation transport treatment which combines features of both types of approaches by explicitly incorporating the dependence of material properties on both temperature and radiation fields. The additional terms generated by the radiation dependence do not change the character of the system of equations and can easily be added to a numerical transport implementation. A numerical example from a Z-pinch application demonstrates that this method improves both the stability and convergence of the calculations. The information needed to characterize the material response to radiation is closely related to that used by the Linear Response Matrix (LRM) approach to near-LTE simulation, and we investigate the use of the LRM for these calculations.

  2. Non-LTE modeling of radiatively driven dense plasmas

    Science.gov (United States)

    Scott, H. A.

    2017-03-01

    There are now several experimental facilities that use strong X-ray fields to produce plasmas with densities ranging from ˜1 to ˜103 g/cm3. Large laser facilities, such as the National Ignition Facility (NIF) and the Omega laser reach high densities with radiatively driven compression, short-pulse lasers such as XFELs produce solid density plasmas on very short timescales, and the Orion laser facility combines these methods. Despite the high densities, these plasmas can be very far from LTE, due to large radiation fields and/or short timescales, and simulations mostly use collisional-radiative (CR) modeling which has been adapted to handle these conditions. These dense plasmas present challenges to CR modeling. Ionization potential depression (IPD) has received much attention recently as researchers work to understand experimental results from LCLS and Orion [1,2]. However, incorporating IPD into a CR model is only one challenge presented by these conditions. Electron degeneracy and the extent of the state space can also play important roles in the plasma energetics and radiative properties, with effects evident in recent observations [3,4]. We discuss the computational issues associated with these phenomena and methods for handling them.

  3. A non-LTE kinetic model for quick analysis of K-shell spectra from Z-pinch plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Li, J., E-mail: s.duan@163.com; Huang, X. B., E-mail: s.duan@163.com; Cai, H. C., E-mail: s.duan@163.com; Yang, L. B., E-mail: s.duan@163.com; Xie, W. P., E-mail: s.duan@163.com; Duan, S. C., E-mail: s.duan@163.com [Key Lab of Pulsed Power, Institute of Fluid Physics, CAEP, P.O. Box 919-108, Mianyang, Sichuan 621999 (China)

    2014-12-15

    Analyzing and modeling K-shell spectra emitted by low-to moderate-atomic number plasma is a useful and effective way to retrieve temperature density of z-pinch plasmas. In this paper, a non-LTE population kinetic model for quick analysis of K-shell spectra was proposed. The model contains ionization stages from bare nucleus to neutral atoms and includes all the important atomic processes. In the present form of the model, the plasma is assumed to be both optically thin and homogeneous with constant temperature and density, and only steady-state situation is considered. According to the detailed calculations for aluminum plasmas, contours of ratios of certain K-shell lines in electron temperature and density plane as well as typical synthesized spectra were presented and discussed. The usefulness of the model is demonstrated by analyzing the spectrum from a neon gas-puff Z-pinch experiment performed on a 1 MA pulsed-power accelerator.

  4. A non-LTE analysis of high energy density Kr plasmas on Z and NIF

    Science.gov (United States)

    Dasgupta, A.; Clark, R. W.; Ouart, N.; Giuliani, J.; Velikovich, A.; Ampleford, D. J.; Hansen, S. B.; Jennings, C.; Harvey-Thompson, A. J.; Jones, B.; Flanagan, T. M.; Bell, K. S.; Apruzese, J. P.; Fournier, K. B.; Scott, H. A.; May, M. J.; Barrios, M. A.; Colvin, J. D.; Kemp, G. E.

    2016-10-01

    Multi-keV X-ray radiation sources have a wide range of applications, from biomedical studies and research on thermonuclear fusion to materials science and astrophysics. The refurbished Z pulsed power machine at the Sandia National Laboratories produces intense multi-keV X-rays from argon Z-pinches, but for a krypton Z-pinch, the yield decreases much faster with atomic number ZA than similar sources on the National Ignition Facility (NIF) laser at the Lawrence Livermore National Laboratory. To investigate whether fundamental energy deposition differences between pulsed power and lasers could account for the yield differences, we consider the Kr plasma on the two machines. The analysis assumes the plasma not in local thermodynamic equilibrium, with a detailed coupling between the hydrodynamics, the radiation field, and the ionization physics. While for the plasma parameters of interest the details of krypton's M-shell are not crucial, both the L-shell and the K-shell must be modeled in reasonable detail, including the state-specific dielectronic recombination processes that significantly affect Kr's ionization balance and the resulting X-ray spectrum. We present a detailed description of the atomic model, provide synthetic K- and L-shell spectra, and compare these with the available experimental data from the Z-machine and from NIF to show that the K-shell yield behavior versus ZA is indeed related to the energy input characteristics. This work aims at understanding the probable causes that might explain the differences in the X-ray conversion efficiencies of several radiation sources on Z and NIF.

  5. Non-LTE CO, revisited

    Science.gov (United States)

    Ayres, Thomas R.; Wiedemann, Gunter R.

    1989-01-01

    A more extensive and detailed non-LTE simulation of the Delta v = 1 bands of CO than attempted previously is reported. The equations of statistical equilibrium are formulated for a model molecule containing 10 bound vibrational levels, each split into 121 rotational substates and connected by more than 1000 radiative transitions. Solutions are obtained for self-consistent populations and radiation fields by iterative application of the 'Lambda-operator' to an initial LTE distribution. The formalism is used to illustrate models of the sun and Arcturus. For the sun, negligible departures from LTE are found in either a theoretical radiative-equilibrium photosphere with outwardly falling temperatures in its highest layers or in a semiempirical hot chromosphere that reproduces the spatially averaged emission cores of Ca II H and K. The simulations demonstrate that the puzzling 'cool cores' of the CO Delta V = 1 bands observed in limb spectra of the sun and in flux spectra of Arcturus cannot be explained simply by non-LTE scattering effects.

  6. Effects of non-local thermodynamic equilibrium conditions on numerical simulations of inertial confinement fusion plasmas

    Indian Academy of Sciences (India)

    N K Gupta; B K Godwal

    2002-07-01

    Effects of non-local thermodynamic equilibrium (non-LTE) condition on emission and hydrodynamics of typical inertial confinement fusion (ICF) plasmas are studied. The average degree of ionization at high temperatures is seen to be much lower compared to the values obtained from Thomas–Fermi scaling or Saha equation for high- element like gold. LTE and non-LTE predictions for emitted radiation from laser-driven gold foil are compared with the experimental results and it is seen that non-LTE simulations show a marked improvement over LTE results. The effects of one group and multigroup, LTE and non-LTE approximations of radiation transport on hydrodynamic parameters are studied for laser-driven aluminium and gold foils. It is further seen that non-LTE and multigroup effects play an important role in predicting conversion efficiency of laser light to X-rays

  7. Non-LTE diagnositics of infrared radiation of Titan's atmosphere

    Science.gov (United States)

    Feofilov, Artem; Rezac, Ladislav; Kutepov, Alexander; Vinatier, Sandrine; Rey, Michael; Nikitin, Andrew; Tyuterev, Vladimir

    2016-06-01

    Yelle (1991) and Garcia-Comas et al, (2011) demonstrated the importance of accounting for the local thermodynamic equilibrium (LTE) breakdown in the middle and upper atmosphere of Titan for the interpretation of infrared radiances measured at these heights. In this work, we make further advance in this field by: • updating the non-LTE model of CH4 emissions in Titan's atmosphere and including a new extended database of CH4 spectroscopic parameters • studying the non-LTE CH4 vibrational level populations and the impact of non-LTE on limb infrared emissions of various CH4 ro-vibrational bands including those at 7.6 and 3.3 µm • implementing our non-LTE model into the LTE-based retrieval algorithm applied by Vinatier et al., (2015) for processing the Cassini/CIRS spectra. We demonstrate that accounting for non-LTE leads to an increase in temperatures retrieved from CIRS 7.6 µm limb emissions spectra (˜10 K at 600 km altitude) and estimate how this affects the trace gas density retrieval. Finally, we discuss the effects of including a large number of weak one-quantum and combinational bands on the calculated daytime limb 3.3 µm emissions and the impact they may have on the CH4 density retrievals from the Cassini VIMS 3.3 µm limb emission observations.

  8. Physics of Solar Prominences: I-Spectral Diagnostics and Non-LTE Modelling

    Science.gov (United States)

    Labrosse, N.; Heinzel, P.; Vial, J.-C,; Kucera, T.; Parenti, S.; Gunar, S.; Schmieder, B.; Kilper, G.

    2010-01-01

    This review paper outlines background information and covers recent advances made via the analysis of spectra and images of prominence plasma and the increased sophistication of non-LTE (i.e. when there is a departure from Local Thermodynamic Equilibrium) radiative transfer models. We first describe the spectral inversion techniques that have been used to infer the plasma parameters important for the general properties of the prominence plasma in both its cool core and the hotter prominence-corona transition region. We also review studies devoted to the observation of bulk motions of the prominence plasma and to the determination of prominence mass. However, a simple inversion of spectroscopic data usually fails when the lines become optically thick at certain wavelengths. Therefore, complex

  9. Absolute Time-Resolved Emission of Non-LTE L-Shell Spectra from Ti-Doped Aerogels

    Energy Technology Data Exchange (ETDEWEB)

    Back,C.; Feldman, U.; Weaver, J.; Seely, J.; Constantin, C.; Holland, G.; Lee, R.; Chung, H.; Scott, H.

    2006-01-01

    Outstanding discrepancies between data and calculations of laser-produced plasmas in recombination have been observed since the 1980s. Although improvements in hydrodynamic modeling may reduce the discrepancies, there are indications that non-LTE atomic kinetics may be the dominant cause. Experiments to investigate non-LTE effects were recently performed at the NIKE KrF laser on low-density Ti-doped aerogels. The laser irradiated a 2 mm diameter, cylindrical sample of various lengths with a 4-ns square pulse to create a volumetrically heated plasma. Ti L-shell spectra spanning a range of 0.47-3 keV were obtained with a transmission grating coupled to Si photodiodes. The diagnostic can be configured to provide 1-dimensional spatial resolution at a single photon energy, or 18 discrete energies with a resolving power, {gamma}/{delta}{gamma} of 3-20. The data are examined and compared to calculations to develop absolute emission measurements that can provide new tests of the non-LTE physics.

  10. Absolute, time-resolved emission of non-LTE L-shell spectra from Ti-doped aerogels

    Energy Technology Data Exchange (ETDEWEB)

    Back, C.A. [Lawrence Livermore National Laboratory, P.O. Box 808, L-21, Livermore, CA 94551 (United States)]. E-mail: tinaback@llnl.gov; Feldman, U. [Artep Inc. 2922 Excelsior Ct., Ellicott City, MD 21042 (United States); Weaver, J.L. [Naval Research Laboratory, 4555 Overlook Drive, SW, Washington DC 20375 (United States); Seely, J.F. [Naval Research Laboratory, 4555 Overlook Drive, SW, Washington DC 20375 (United States); Constantin, C. [Lawrence Livermore National Laboratory, P.O. Box 808, L-21, Livermore, CA 94551 (United States); Holland, G. [Naval Research Laboratory, 4555 Overlook Drive, SW, Washington DC 20375 (United States); Lee, R.W. [Lawrence Livermore National Laboratory, P.O. Box 808, L-21, Livermore, CA 94551 (United States); Chung, H.-K. [Lawrence Livermore National Laboratory, P.O. Box 808, L-21, Livermore, CA 94551 (United States); Scott, H.A. [Lawrence Livermore National Laboratory, P.O. Box 808, L-21, Livermore, CA 94551 (United States)

    2006-05-15

    Outstanding discrepancies between data and calculations of laser-produced plasmas in recombination have been observed since the 1980s. Although improvements in hydrodynamic modeling may reduce the discrepancies, there are indications that non-LTE atomic kinetics may be the dominant cause. Experiments to investigate non-LTE effects were recently performed at the NIKE KrF laser on low-density Ti-doped aerogels. The laser irradiated a 2mm diameter, cylindrical sample of various lengths with a 4-ns square pulse to create a volumetrically heated plasma. Ti L-shell spectra spanning a range of 0.47-3keV were obtained with a transmission grating coupled to Si photodiodes. The diagnostic can be configured to provide 1-dimensional spatial resolution at a single photon energy, or 18 discrete energies with a resolving power, {lambda}/{delta}{lambda} of 3-20. The data are examined and compared to calculations to develop absolute emission measurements that can provide new tests of the non-LTE physics.

  11. Non-LTE modeling of supernova-fallback disks

    CERN Document Server

    Werner, K; Rauch, T

    2006-01-01

    We present a first detailed spectrum synthesis calculation of a supernova-fallback disk composed of iron. We assume a geometrically thin disk with a radial structure described by the classical alpha-disk model. The disk is represented by concentric rings radiating as plane-parallel slabs. The vertical structure and emission spectrum of each ring is computed in a fully self-consistent manner by solving the structure equations simultaneously with the radiation transfer equations under non-LTE conditions. We describe the properties of a specific disk model and discuss various effects on the emergent UV/optical spectrum. We find that strong iron-line blanketing causes broad absorption features over the whole spectral range. Limb darkening changes the spectral distribution up to a factor of four depending on the inclination angle. Consequently, such differences also occur between a blackbody spectrum and our model. The overall spectral shape is independent of the exact chemical composition as long as iron is the d...

  12. Non-LTE Infrared Emission from Protoplanetary Disk Surfaces

    Science.gov (United States)

    Lockwood, A.; Blake, G.

    2011-05-01

    Accurately characterizing protoplanetary disks (proplyds) is integral to understanding the formation and evolution of planetary systems. The chemical reactions and physical processes within a disk determine the abundances and variety of molecular building blocks available for planet formation. Observations at infrared to millimeter wavelengths confirm a plethora of organic molecules exist in proplyds, including H2O, OH, HCN, C2H2, CO, and CO2 (Carr & Najita, 2008; Pontoppidan et al., 2010). These molecules not only provide the solid material for ice+rock planetary cores, their line emission dominates the thermal balance in the disk and provides robust signatures to examine the dynamical evolution of protoplanetary environments. Thus, it is critical to understand molecular abundance profiles in disks and the processes that affect them. We aim to model molecular excitation in a sample of proplyds and thereby verify certain disk properties. Densities in the warm molecular layers of a disk are insufficient to ensure the conditions for local thermodynamic equilibrium (LTE), so the state of the gas must be computed precisely. We utilize a radiative transfer code to model the radiation field in the disk, coupled with an escape probability code to determine the excitation of a given molecule, to derive the non-LTE level populations. We then utilize a raytracer to generate spectral image cubes covering the entire disk. We will present results for CO, whose relatively stable abundance and strong emission features provide a good foundation from which we can further constrain the parameters of a disk. Using infrared spectra from the NIRSPEC instrument on the Keck Telescope, we constrain column densities, temperatures, and emitting radii for a suite of nearby proplyds.

  13. Non-LTE line formation of Fe in late-type stars - III. 3D non-LTE analysis of metal-poor stars

    Science.gov (United States)

    Amarsi, A. M.; Lind, K.; Asplund, M.; Barklem, P. S.; Collet, R.

    2016-08-01

    As one of the most important elements in astronomy, iron abundance determinations need to be as accurate as possible. We investigate the accuracy of spectroscopic iron abundance analyses using archetypal metal-poor stars. We perform detailed 3D non-LTE radiative transfer calculations based on 3D hydrodynamic STAGGER model atmospheres, and employ a new model atom that includes new quantum-mechanical neutral hydrogen collisional rate coefficients. With the exception of the red giant HD122563, we find that the 3D non-LTE models achieve Fe I/Fe II excitation and ionization balance as well as not having any trends with equivalent width to within modelling uncertainties of 0.05 dex, all without having to invoke any microturbulent broadening; for HD122563 we predict that the current best parallax-based surface gravity is overestimated by 0.5 dex. Using a 3D non-LTE analysis, we infer iron abundances from the 3D model atmospheres that are roughly 0.1 dex higher than corresponding abundances from 1D MARCS model atmospheres; these differences go in the same direction as the non-LTE effects themselves.We make available grids of departure coefficients, equivalent widths and abundance corrections, calculated on 1D MARCS model atmospheres and horizontally- and temporally-averaged 3D STAGGER model atmospheres.

  14. Non-LTE line formation of Fe in late-type stars - III. 3D non-LTE analysis of metal-poor stars

    Science.gov (United States)

    Amarsi, A. M.; Lind, K.; Asplund, M.; Barklem, P. S.; Collet, R.

    2016-12-01

    As one of the most important elements in astronomy, iron abundance determinations need to be as accurate as possible. We investigate the accuracy of spectroscopic iron abundance analyses using archetypal metal-poor stars. We perform detailed 3D non-LTE radiative transfer calculations based on 3D hydrodynamic STAGGER model atmospheres, and employ a new model atom that includes new quantum-mechanical neutral hydrogen collisional rate coefficients. With the exception of the red giant HD122563, we find that the 3D non-LTE models achieve Fe I/Fe II excitation and ionization balance as well as not having any trends with equivalent width to within modelling uncertainties of 0.05 dex, all without having to invoke any microturbulent broadening; for HD122563 we predict that the current best parallax-based surface gravity is overestimated by 0.5 dex. Using a 3D non-LTE analysis, we infer iron abundances from the 3D model atmospheres that are roughly 0.1 dex higher than corresponding abundances from 1D MARCS model atmospheres; these differences go in the same direction as the non-LTE effects themselves. We make available grids of departure coefficients, equivalent widths and abundance corrections, calculated on 1D MARCS model atmospheres and horizontally and temporally averaged 3D STAGGER model atmospheres.

  15. Non-LTE line formation of Fe in late-type stars - III. 3D non-LTE analysis of metal-poor stars

    DEFF Research Database (Denmark)

    Amarsi, A. M.; Lind, K.; Asplund, M.;

    2016-01-01

    As one of the most important elements in astronomy, iron abundance determinations need to be as accurate as possible. We investigate the accuracy of spectroscopic iron abundance analyses using archetypal metal-poor stars. We perform detailed 3D non-LTE radiative transfer calculations based on 3D...

  16. The influence of electron collisions on non-LTE Li line formation in stellar atmospheres

    CERN Document Server

    Osorio, Y; Lind, K; Asplund, M

    2011-01-01

    The influence of uncertainties in the rate coefficient data for electron-impact excitation and ionization on non-LTE Li line formation in cool stellar atmospheres is investigated. We examine the collision data used in previous non-LTE calculations and compare with recent calculations using convergent close-coupling (CCC) techniques, as well our own calculations using the R-matrix with pseudostates (RMPS) method. We find excellent agreement between rate coefficients from the CCC and RMPS calculations, and reasonable agreement between these data and the semi-empirical data used in non-LTE calculations up till now. The results of non-LTE calculations using the old and new data sets are compared and only small differences are found; of order 0.01 dex (~ 2%) or less in the abundance corrections. We therefore conclude that electron collision data are not a significant source of uncertainty in non-LTE Li line formation calculations. Indeed, together with the collision data for the charge exchange process Li(3s) + H ...

  17. The solar silicon abundance based on 3D non-LTE calculations

    Science.gov (United States)

    Amarsi, A. M.; Asplund, M.

    2017-01-01

    We present 3D non-local thermodynamic equilibrium (non-LTE) radiative transfer calculations for silicon in the solar photosphere, using an extensive model atom that includes recent, realistic neutral hydrogen collisional cross-sections. We find that photon losses in the Si I lines give rise to slightly negative non-LTE abundance corrections of the order of -0.01 dex. We infer a 3D non-LTE-based solar silicon abundance of lg ɛ_{Si{⊙}}=7.51 dex. With silicon commonly chosen to be the anchor between the photospheric and meteoritic abundances, we find that the meteoritic abundance scale remains unchanged compared with the Asplund et al. and Lodders et al. results.

  18. The solar silicon abundance based on 3D non-LTE calculations

    CERN Document Server

    Amarsi, A M

    2016-01-01

    We present three-dimensional (3D) non-local thermodynamic equilibrium (non-LTE) radiative transfer calculations for silicon in the solar photosphere, using an extensive model atom that includes recent, realistic neutral hydrogen collisional cross-sections. We find that photon losses in the SiI lines give rise to slightly negative non-LTE abundance corrections of the order -0.01 dex. We infer a 3D non-LTE based solar silicon abundance of 7.51 dex. With silicon commonly chosen to be the anchor between the photospheric and meteoritic abundances, we find that the meteoritic abundance scale remains unchanged compared with the Asplund et al. (2009) and Lodders et al. (2009) results.

  19. Non-LTE line formation of Fe in late-type stars - III. 3D non-LTE analysis of metal-poor stars

    CERN Document Server

    Amarsi, A M; Asplund, M; Barklem, P S; Collet, R

    2016-01-01

    As one of the most important elements in astronomy, iron abundance determinations need to be as accurate as possible. We investigate the accuracy of spectroscopic iron abundance analyses using archetypal metal-poor stars. We perform detailed 3D non-LTE radiative transfer calculations based on 3D hydrodynamic Stagger model atmospheres, and employ a new model atom that includes new quantum-mechanical neutral hydrogen collisional rate coefficients. With the exception of the red giant HD122563, we find that the 3D non-LTE models achieve Fe i/Fe ii excitation and ionization balance as well as not having any trends with equivalent width to within modelling uncertainties of 0.05 dex, all without having to invoke any microturbulent broadening; for HD122563 we predict that the current best parallax-based surface gravity is over-estimated by 0.5 dex. Using a 3D non-LTE analysis, we infer iron abundances from the 3D model atmospheres that are roughly 0.1 dex higher than corresponding abundances from 1D MARCS model atmos...

  20. The non-LTE formation of Li I lines in cool stars

    NARCIS (Netherlands)

    Carlsson, M.; Rutten, R.J.; Bruls, J.H.M.J.; Shchukina, N. G.

    1994-01-01

    We study the non-LTE (non local thermodynamic equilibrium) formation of Li I lines in the spectra of cool stars for a grid of radiative-equilibrium model atmospheres with variation in effective temperature, gravity, metallicity and lithium abundance. We analyze the mechanisms by which departures fro

  1. Formation of Zr I and II lines under non-LTE conditions of stellar atmospheres

    CERN Document Server

    Velichko, A; Nilsson, H

    2011-01-01

    The non-local thermodynaic equilibrium (non-LTE) line formation for the two ions of zirconium is considered through a range of spectral types when the Zr abundance varies from the solar value down to [Zr/H] = -3. The model atom was built using 148 energy levels of Zr I, 772 levels of Zr II, and the ground state of Zr III. It was shown that the main non-LTE mechnism for the minority species Zr I is ultraviolet overionization. Non-LTE leads to systematically depleted total absorption in the Zr I lines and positive abundance corrections, reaching to 0.33 dex for the solar metallicity models. The excited levels of Zr II are overpopulated relative to their thermodynamic equilibrium populations in the line formation layers due to radiative pumping from the low-excitation levels. As a result, the line source function exceeds the Planck function leading to weakening the Zr II lines and positive non-LTE abundance corrections. Such corrections grow towards lower metallicity and lower surface gravity and reach to 0.34 d...

  2. Exact vs. Gauss-Seidel numerical solutions of the non-LTE radiation transfer problem

    Science.gov (United States)

    Quang, Carine; Paletou, Frédéric; Chevallier, Loïc

    2004-12-01

    Although published in 1995 (Trujillo Bueno & Fabiani Bendicho, ApJ 455, 646), the Gauss-Seidel method for solving the non-LTE radiative transfer problem has deserved too little attention in the astrophysical community yet. Further tests of the performances and of the accuracy of the numerical scheme are provided.

  3. Non-LTE Line Blanketing in Stars With Extended Outflowing Atmospheres.

    Science.gov (United States)

    Hillier, D. J.; Miller, D. L.

    1995-05-01

    With continuing advances in radiative transfer techniques, increases in computing power, and the availability of at least some of the necessary atomic data, it is now possible to consider the computation of detailed non-LTE model atmospheres in which the full effects of non-LTE line blanketing are taken into account. We discuss our own implementation of non-LTE line blanketing in a spherical non-LTE code developed for the investigation of objects with extended outflows. A partial linearization technique is used to simultaneously solve the radiative transfer equation in conjunction with the equations of statistical equilibrium. Convergence properties are similar to that obtained with an ``Optimal'' Approximate-Lambda Operator. CNO line blanketing has been incorporated without major difficulty, while Fe blanketing is currently being installed. Comparisons of model spectra with recent HST observations of an LMC WC star will be presented. When completed we anticipate the code will be applicable to the study of a wide range of phenomena exhibiting outflows including Luminous-Blue variables, Supernovae, Wold-Rayet stars and Novae. Partial support for this work was provided by NASA through grant Nos GO-5460.01-93A and GO-4550.01-92A from the Space Science Institute which is operated under the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS5-26555. Support from NASA award NAGW-3828 is also gratefully acknowledged.

  4. A new solar carbon abundance based on non-LTE CN molecular spectra

    Science.gov (United States)

    Mount, G. H.; Linsky, J. L.

    1975-01-01

    A detailed non-LTE analysis of solar CN spectra strongly suggest a revised carbon abundance for the sun. We recommend a value of log carbon abundance = 8.35 plus or minus 0.15 which is significantly lower than the presently accepted value of log carbon abundance = 8.55. This revision may have important consequences in astrophysics.

  5. Radiation Heat Waves in Gold Plasma

    Institute of Scientific and Technical Information of China (English)

    YANG Jia-Min; XU Yan; DING Yao-Nan; LAI Dong-Xian; DING Yong-Kun; JIANG Shao-En; ZHENG Zhi-Jian; MIAO Wen-Yong

    2003-01-01

    Eight beams 0.35/um laser with pulse duration of about 1.0ns and energy of 260 J per beam was injected into a cylindrical cavity to generate intense x-ray radiation on the "Shengguang I" high power laser facility. Gold foils with a thickness in the range of 0.09-0.52/j,m were attached on the diagnostic hole of the cavity and ablated by the intense x-ray radiation. The propagating radiation heat wave in the high-Z gold plasma was observed clearly. For comparison, we also simulated the experimental results.

  6. The role of hydrogen collisions in non-LTE abundance analyses of aluminium

    Science.gov (United States)

    Nordlander, Thomas; Lind, Karin

    2015-08-01

    The abundance patterns of metal-poor stars contain crucial information on the early evolution of the Galaxy. Stellar abundances must however be inferred from spectrum synthesis, which hinges on the input physics. Stellar atmospheres are typically assumed to be one-dimensional, with the equation of state fully determined only by local properties (in LTE, local thermodynamic equilibrium). Although non-LTE has been studied for decades, there are still unsolved problems related primarily to collisional rates. Due to a lack of laboratory data at the low collisional energies typical of stellar atmospheres, Drawin's order-of-magnitude estimates based on Thomson electron scattering are typically applied to inelastic hydrogen collisions.We critically evaluate the influence of uncertainties in input data on non-LTE abundance determinations of aluminium in metal-poor stars. We execute these analyses using different sources for the atomic data, and update the classical collisional rates with modern, physically appropriate estimates.

  7. Accurate Collisional Cross-Sections: Important Non-Lte Input Data

    Science.gov (United States)

    Mashonkina, L.

    2010-11-01

    Non-LTE modelling for a particular atom requires accurate collisional excitation and ionization cross-sections for the entire system of transitions in the atom. This review concerns with inelastic collisions with electrons and neutral hydrogen atoms. For the selected atoms, H i and Ca ii, comparisons are made between electron impact excitation rates from ab initio calculations and various theoretical approximations. The effect of the use of modern data on non-LTE modelling is shown. For most transitions and most atoms, hydrogen collisional rates are calculated using a semi-empirical modification of the classical Thomson formula for ionization by electrons. Approaches used to estimate empirically the efficiency of hydrogenic collisions in the statistical equilibrium of atoms are reviewed. This research was supported by the Deutsche Forschungsgemeinschaft with grant 436 RUS 17/13/07.

  8. A non-LTE retrieval scheme for sounding the upper atmosphere of Mars in the infrared

    Science.gov (United States)

    Lopez-Valverde, Miguel Angel; García-Comas, Maya; Funke, Bernd; Jimenez-Monferrer, Sergio; Lopez-Puertas, Manuel

    2016-04-01

    Several instruments on board Mars Express have been sounding the upper atmosphere of Mars systematically in a limb geometry in the IR part of the spectrum. Two of them in particular, OMEGA and PFS, performed emission measurements during daytime and detected the strongest IR bands of species like CO2 and CO (Piccialli et al, JGRE, submitted). Similarly on Venus, the instrument VIRTIS carried out observations of CO2 and CO bands at 2.7, 4.3 and 4.7 um at high altitudes (Gilli et al, JGRE, 2009). All these daylight atmospheric emissions respond to fluorescent situations, a case of non-local thermodynamic equilibrum conditions (non-LTE), well understood nowadays using comprehensive non-LTE theoretical models and tools (Lopez-Valverde et al., Planet. Space Sci., 2011). However, extensive exploitation of these emissions has only been done in optically thin conditions to date (Gilli et al, Icarus, 2015) or in a broad range of altitudes if in nadir geometry (Peralta et al, Apj, 2015). Within the H2020 project UPWARDS we aim at performing retrievals under non-LTE conditions including optically thick cases, like those of the CO2 and CO strongest bands during daytime in the upper atmosphere of Mars. Similar effort will also be applied eventually to Venus. We will present the non-LTE scheme used for such retrievals, based on similar efforts performed recently in studies of the Earth's upper atmosphere using data from the MIPAS instrument, on board Envisat (Funke et al., Atmos. Chem. Phys., 2009; Jurado-Navarro, PhD Thesis, Univ. Granada, 2015). Acknowledgemnt: This work is supported by the European Union's Horizon 2020 Programme under grant agreement UPWARDS-633127

  9. Non-LTE Line Formation in the Near-IR: Hot Stars

    CERN Document Server

    Przybilla, Norbert

    2010-01-01

    Line-formation calculations in the Rayleigh-Jeans tail of the spectral energy distribution are complicated by an amplification of non-LTE effects. For hot stars this can make quantitative modelling of spectral lines in the near-IR challenging. An introduction to the modelling problems is given and several examples in the context of near-IR line formation for hydrogen and helium are discussed.

  10. Non-LTE analysis of copper abundances for the two distinct halo populations in the solar neighborhood

    CERN Document Server

    Yan, H L; Nissen, P E; Zhao, G

    2016-01-01

    Two distinct halo populations were found in the solar neighborhood by a series of works. They can be clearly separated by [alpha\\Fe] and several other elemental abundance ratios including [Cu/Fe]. Very recently, a non-local thermodynamic equilibrium (non-LTE) study revealed that relatively large departures exist between LTE and non-LTE results in copper abundance analysis. We aim to derive the copper abundances for the stars from the sample of Nissen et al (2010) with both LTE and non-LTE calculations. Based on our results, we study the non-LTE effects of copper and investigate whether the high-alpha population can still be distinguished from the low-alpha population in the non-LTE [Cu/Fe] results. Our differential abundance ratios are derived from the high-resolution spectra collected from VLT/UVES and NOT/FIES spectrographs. Applying the MAFAGS opacity sampling atmospheric models and spectrum synthesis method, we derive the non-LTE copper abundances based on the new atomic model with current atomic data obt...

  11. Non-LTE iron abundances in cool stars: The role of hydrogen collisions

    CERN Document Server

    Ezzeddine, Rana; Plez, Bertrand

    2015-01-01

    In the aim of determining accurate iron abundances in stars, this work is meant to empirically calibrate H-collision cross-sections with iron, where no quantum mechanical calculations have been published yet. Thus, a new iron model atom has been developed, which includes hydrogen collisions for excitation, ionization and charge transfer processes. We show that collisions with hydrogen leading to charge transfer are important for an accurate non-LTE modeling. We apply our calculations on several benchmark stars including the Sun, the metal-rich star {\\alpha} Cen A and the metal-poor star HD140283.

  12. Non-LTE iron abundances in cool stars: The role of hydrogen collisions

    Science.gov (United States)

    Ezzeddine, R.; Merle, Th.; Plez, B.

    2016-09-01

    In the aim of determining accurate iron abundances in stars, this work is meant to empirically calibrate H-collision cross-sections with iron where no quantum mechanical calculations have been published yet. Thus, a new iron model atom has been developed which includes hydrogen collisions for excitation, ionization, and charge transfer processes. We show that collisions with hydrogen leading to charge transfer are important for an accurate non-LTE modeling. We apply our calculations on several benchmark stars including the Sun, the metal-rich star α Cen A, and the metal-poor star HD 140283.

  13. Gold in erythrocytes, whole blood, and plasma during long-term chrysotherapy.

    OpenAIRE

    Pedersen, S.M.; Graabaek, P M

    1980-01-01

    The concentrations of gold in erythrocytes, whole blood, cell-rich plasma, and cell-free plasma were investigated in 17 patients with rheumatoid arthritis undergoing long-term chrysotherapy. Gold estimations were performed with a graphite tube atomic absorption spectrophotometer. Significant quantities of gold were found in isolated erythrocytes of 12 patients. There was no correlation between erythrocyte gold and therapeutic response, plasma gold, and gold in whole blood. Nor did gold in who...

  14. Non-LTE Spectral Analysis of Extremely Hot Post-AGB Stars: Constraints for Evolutionary Theory

    CERN Document Server

    Rauch, Thomas; Ziegler, Marc; Koesterke, Lars; Kruk, Jeffrey W

    2008-01-01

    Spectral analysis by means of Non-LTE model-atmosphere techniques has arrived at a high level of sophistication: fully line-blanketed model atmospheres which consider opacities of all elements from H to Ni allow the reliable determination of photospheric parameters of hot, compact stars. Such models provide a crucial test of stellar evolutionary theory: recent abundance determinations of trace elements like, e.g., F, Ne, Mg, P, S, Ar, Fe, and Ni are suited to investigate on AGB nucleosynthesis. E.g., the strong Fe depletion found in hydrogen-deficient post-AGB stars is a clear indication of an efficient s-process on the AGB where Fe is transformed into Ni or even heavier trans iron-group elements. We present results of recent spectral analyses based on high-resolution UV observations of hot stars.

  15. Non-LTE analysis of subluminous O-star. V - The binary system HD 128220

    Science.gov (United States)

    Gruschinske, J.; Hamann, W. R.; Kudritzki, R. P.; Simon, K. P.; Kaufmann, J. P.

    1983-05-01

    Spectra of the binary system HD 128220 were taken in the UV and in the visual. The hot component - an O subdwarf - is analysed by means of non-LTE calculations. The cool companion has an effective temperature about 5500 ± 500K (Type G). The discussion of the stellar parameters arrives at results which agree with those derived from the mass function (Wallerstein and Wolff, 1966): if both components have about the same mass, these masses lie above 3 M_sun;. An O subdwarf of such a high mass has not yet been found and may be a supernova candidate. However, within the error margin of the orbital data also a mass ratio of MO/MG = 0.5 cannot be excluded, which would lead to stellar parameters which are more common for sdO's.

  16. Characterization of OMEGA/MEx CO2 non-LTE limb observations on the dayside of Mars

    Science.gov (United States)

    Piccialli, A.; Drossart, P.; Lopez-Valverde, M. A.; Altieri, F.; Määttänen, A.; Gondet, B.; Witasse, O.; Bibring, J. P.

    2012-09-01

    The upper atmosphere of a terrestrial planet is a region difficult to sound, both by in-situ and remote sounding [1]. This atmospheric region is characterized by non-local thermodynamic equilibrium (non-LTE) that occurs when collisions between atmospheric species are not enough efficient in transferring energy. The CO2 non-LTE emission at 4.3 μm originates in the upper layers of the atmosphere and is a feature common to the three terrestrial planets with an atmosphere (Venus, Earth, and Mars). It provides a useful tool to gain insight into the atmospheric processes at these altitudes [2]. Non-LTE fluorescent emissions were first observed in the Earth's upper atmosphere in CO2 bands at 15 and 4.3 μm [3] and were later observed on several planets in different spectral bands. Ground-based observations of CO2 laser bands at 10 μm in the atmospheres of Venus and Mars [4] were interpreted as non-LTE emissions by several atmospheric models developed in the 1980s [5]. On Jupiter, Saturn and Titan non-LTE emissions were identified in the CH4 band at 3.3 μm [6]. More recently, CO2 non-LTE emission at 4.3 μm was detected in the upper atmosphere of Mars and Venus by the PFS (Planetary Fourier Spectrometer) and OMEGA (Visible and Infrared Mapping Spectrometer) experiments on board the European spacecraft Mars Express [7, 8, 9] and by VIRTIS (Visible and Infrared Thermal Imaging Spectrometer) on board the European Venus Express [10]. These observations led to the development of a more comprehensive non-LTE model for the upper atmosphere [9, 11]. According to these models, during daytime the solar radiation in several near-IR bands from 1 to 5 μm produce enhanced state populations of many CO2 vibrational levels which cascade down to lower states emitting photons in diverse 4.3 μm bands. These emissions produce what is observed.

  17. Non-LTE spectral models for the gaseous debris-disk component of Ton 345

    CERN Document Server

    Hartmann, S; Rauch, T; Werner, K

    2014-01-01

    For a fraction of single white dwarfs with debris disks, an additional gaseous disk was discovered. Both dust and gas are thought to be created by the disruption of planetary bodies. The composition of the extrasolar planetary material can directly be analyzed in the gaseous disk component, and the disk dynamics might be accessible by investigating the temporal behavior of the Ca II infrared emission triplet, hallmark of the gas disk. We obtained new optical spectra for the first helium-dominated white dwarf for which a gas disk was discovered (Ton 345) and modeled the non-LTE spectra of viscous gas disks composed of carbon, oxygen, magnesium, silicon, sulfur, and calcium with chemical abundances typical for solar system asteroids. Iron and its possible line-blanketing effects on the model structure and spectral energy distribution was still neglected. A set of models with different radii, effective temperatures, and surface densities as well as chondritic and bulk-Earth abundances was computed and compared w...

  18. Partial redistribution in 3D non-LTE radiative transfer in solar atmosphere models

    CERN Document Server

    Sukhorukov, Andrii V

    2016-01-01

    Resonance spectral lines such as H I Ly {\\alpha}, Mg II h&k, and Ca II H&K that form in the solar chromosphere are influenced by the effects of 3D radiative transfer as well as partial redistribution (PRD). So far no one has modeled these lines including both effects simultaneously owing to the high computing demands of existing algorithms. Such modeling is however indispensable for accurate diagnostics of the chromosphere. We present a computationally tractable method to treat PRD scattering in 3D model atmospheres using a 3D non-LTE radiative transfer code. To make the method memory-friendly, we use the hybrid approximation of Leenaarts et al. (2012) for the redistribution integral. To make it fast, we use linear interpolation on equidistant frequency grids. We verify our algorithm against computations with the RH code and analyze it for stability, convergence, and usefulness of acceleration using model atoms of Mg II with the h&k lines and H I with the Ly {\\alpha} line treated in PRD. A typical...

  19. Strontium: To LTE or non-LTE that is the question

    CERN Document Server

    Hansen, Camilla J; Cescutti, Gabriele; Francois, Patrick; Arcones, Almudena; Karakas, Amanda I; Lind, Karin; Chiappini, Cristina

    2012-01-01

    Strontium has proven itself to be one of the most important neutron-capture elements in the study of metal-poor stars. Thanks to the strong absorption lines of Sr, they can be detected even in the most metal-poor stars and also in low-resolution spectra. However, we still cannot explain the large star-to-star abundance scatter we derive for metal-poor stars. Here we confront Galactic chemical evolution (GCE) with improved abundances for SrI+II including updated atomic data, to evaluate possible explanations for the large star-to-star scatter at low metallicities. We derive abundances under both local thermodynamic equilibrium (LTE) and non-LTE (NLTE) for stars spanning a large interval of stellar parameters. Gravities and metallicities are also determined in NLTE. We confirm that the ionisation equilibrium between SrI and SrII is satisfied under NLTE but not LTE, where the difference between SrI and SrII is on average ~0.3dex. We show that the NLTE corrections are of increasing importance as the metallicity d...

  20. New non-LTE model of OH(v) in the mesopshere/lower thermosphere

    Science.gov (United States)

    Panka, Peter; Kutepov, Alexander; Kalogerakis, Konstantinos; Janches, Diego; Feofilov, Artem; Rezac, Ladi; Marsh, Daniel; Yigit, Erdal

    2017-04-01

    We present a new detailed non-LTE model of OH(v) for the nighttime mesosphere/lower thermosphere. The model accounts for chemical production of vibrationally excited OH and for various vibrational-vibrational (VV) and vibrational-translational (VT) energy exchanges with main atmospheric constituents. The new feature was added to account for the "indirect" vibrational-electronic (VE) mechanism OH(v)→O(1D)→N2(v) of the OH vibrational energy transfer to N2, recently suggested by Sharma et al. [2015] and confirmed through laboratory studies by Kalogerakis et al. [2016]. We study the impact of this mechanism on the OH(v) populations and emissions in the two SABER channels at 1.6 and 2.0 μm. We also discuss the implications this mechanism will have on the retrieval of OH and O densities, as well as its effects on the nighttime CO2 density retrievals from the SABER 4.3 μm channel.

  1. Neon and CNO Abundances for Extreme Helium Stars -- A Non-LTE Analysis

    CERN Document Server

    Pandey, Gajendra

    2010-01-01

    A non-LTE (NLTE) abundance analysis was carried out for three extreme helium stars (EHes): BD+10 2179, BD-9 4395, and LS IV+6 002, from their optical spectra with NLTE model atmospheres. NLTE TLUSTY model atmospheres were computed with H, He, C, N, O, and Ne treated in NLTE. Model atmosphere parameters were chosen from consideration of fits to observed He I line profiles and ionization equilibria of C and N ions. The program SYNSPEC was then used to determine the NLTE abundances for Ne as well as H, He, C, N, and O. LTE neon abundances from Ne I lines in the EHes: LSE 78, V1920 Cyg, HD 124448, and PV Tel, are derived from published models and an estimate of the NLTE correction applied to obtain the NLTE Ne abundance. We show that the derived abundances of these key elements, including Ne, are well matched with semi-quantitative predictions for the EHe resulting from a cold merger (i.e., no nucleosynthesis during the merger) of a He white dwarf with a C-O white dwarf.

  2. Non-LTE modeling of the near UV band of late-type stars

    CERN Document Server

    Short, C Ian

    2008-01-01

    We investigate the ability of both LTE and Non-LTE models to fit the near UV band absolute flux distribution and individual spectral line profiles of three standard stars for which high quality spectrophotometry and high resolution spectroscopy are available: The Sun (G2 V), Arcturus (K2 III), and Procyon (F5 IV-V). We investigate 1) the effect of the choice of atomic line list on the ability of NLTE models to fit the near UV band flux level, 2) the amount of a hypothesized continuous thermal absorption extinction source required to allow NLTE models to fit the observations, and 3) the semi-empirical temperature structure required to fit the observations with NLTE models and standard continuous near UV extinction. We find that all models that are computed with high quality atomic line lists predict too much flux in the near UV band for Arcturus, but fit the warmer stars well. The variance among independent measurements of the solar irradiance in the near UV is sufficiently large that we cannot definitely conc...

  3. Oxygen spectral line synthesis: 3D non-LTE with CO5BOLD hydrodynamical model atmospheres

    CERN Document Server

    Prakapavicius, D; Kucinskas, A; Ludwig, H -G; Freytag, B; Caffau, E; Cayrel, R

    2013-01-01

    In this work we present first results of our current project aimed at combining the 3D hydrodynamical stellar atmosphere approach with non-LTE (NLTE) spectral line synthesis for a number of key chemical species. We carried out a full 3D-NLTE spectrum synthesis of the oxygen IR 777 nm triplet, using a modified and improved version of our NLTE3D package to calculate departure coefficients for the atomic levels of oxygen in a CO5BOLD 3D hydrodynamical solar model atmosphere. Spectral line synthesis was subsequently performed with the Linfor 3D code. In agreement with previous studies, we find that the lines of the oxygen triplet produce deeper cores under NLTE conditions, due to the diminished line source function in the line forming region. This means that the solar oxygen IR 777 nm lines should be stronger in NLTE, leading to negative 3D NLTE-LTE abundance corrections. Qualitatively this result would support previous claims for a relatively low solar oxygen abundance. Finally, we outline several further steps ...

  4. Neon and CNO Abundances for Extreme Helium Stars—A Non-LTE Analysis

    Science.gov (United States)

    Pandey, Gajendra; Lambert, David L.

    2011-02-01

    A non-LTE (NLTE) abundance analysis was carried out for three extreme helium stars (EHes): BD+10° 2179, BD-9° 4395, and LS IV+6° 002, from their optical spectra with NLTE model atmospheres. NLTE TLUSTY model atmospheres were computed with H, He, C, N, O, and Ne treated in NLTE. Model atmosphere parameters were chosen from consideration of fits to observed He I line profiles and ionization equilibria of C and N ions. The program SYNSPEC was then used to determine the NLTE abundances for Ne as well as H, He, C, N, and O. LTE neon abundances from Ne I lines in the EHes: LSE 78, V1920 Cyg, HD 124448, and PV Tel, are derived from published models and an estimate of the NLTE correction applied to obtain the NLTE Ne abundance. We show that the derived abundances of these key elements, including Ne, are well matched with semi-quantitative predictions for the EHe resulting from a cold merger (i.e., no nucleosynthesis during the merger) of an He white dwarf with a C-O white dwarf.

  5. Non-LTE models for the gaseous metal component of circumstellar discs around white dwarfs

    CERN Document Server

    Hartmann, S; Rauch, T; Werner, K

    2011-01-01

    Gaseous metal discs around single white dwarfs have been discovered recently. They are thought to develop from disrupted planetary bodies. Spectroscopic analyses will allow us to study the composition of extrasolar planetary material. We investigate in detail the first object for which a gas disc was discovered (SDSS J122859.93+104032.9). Therefor we perform non-LTE modelling of viscous gas discs by computing the detailed vertical structure and line spectra. The models are composed of carbon, oxygen, magnesium, silicon, calcium, and hydrogen with chemical abundances typical for Solar System asteroids. Line asymmetries are modelled by assuming spiral-arm and eccentric disc structures as suggested by hydrodynamical simulations. The observed infrared Ca II emission triplet can be modelled with a hydrogen-deficient metal gas disc located inside of the tidal disruption radius, with an effective temperature of about 6000 K and a surface mass density of 0.3 g/cm^2. The inner radius is well constrained at about 0.64 ...

  6. Non-LTE inversions of the Mg II h&k and UV triplet lines

    CERN Document Server

    Rodríguez, Jaime de la Cruz; Ramos, Andrés Asensio

    2016-01-01

    The Mg II h&k lines are powerful diagnostics for studying the solar chromosphere. They have become particularly popular with the launch of the IRIS satellite, and a number of studies that include these lines have lead to great progress in understanding chromospheric heating, in many cases thanks to the support from 3D MHD simulations. In this study we utilize another approach to analyze observations: non-LTE inversions of the Mg II h&k and UV triplet lines including the effects of partial redistribution. Our inversion code attempts to construct a model atmosphere that is compatible with the observed spectra. We have assessed the capabilities and limitations of the inversions using the FALC atmosphere and a snapshot from a 3D radiation-MHD simulation. We find that Mg II h&k allow reconstructing a model atmosphere from the middle photosphere to the transition region. We have also explored the capabilities of a multi-line/multi-atom setup, including the Mg II h&k, the Ca II 854.2 nm and the Fe I ...

  7. Inelastic H+Li and H^-+Li^+ collisions and non-LTE Li I line formation in stellar atmospheres

    CERN Document Server

    Barklem, P S; Asplund, M

    2003-01-01

    Rate coefficients for inelastic collisions between Li and H atoms covering all transitions between the asymptotic states Li(2s,2p,3s,3p,3d,4s,4p,4d,4f)+H(1s) and Li^+ +H^- are presented for the temperature range 2000-8000 K based on recent cross-section calculations. The data are of sufficient completeness for non-LTE modelling of the Li I 670.8 nm and 610.4 nm features in late-type stellar atmospheres. Non-LTE radiative transfer calculations in both 1D and 3D model atmospheres have been carried out for test cases of particular interest. Our detailed calculations show that the classical modified Drawin-formula for collisional excitation and de-excitation (Li*+H Li*'+H) over-estimates the cross-sections by typically several orders of magnitude and consequently that these reactions are negligible for the line formation process. However, the charge transfer reactions collisional ion-pair production and mutual neutralization (Li*+H Li^+ +H^-) are of importance in thermalizing Li. In particular, 3D non-LTE calcu...

  8. CO2 non-LTE limb emissions in Mars' atmosphere as observed by OMEGA/Mars Express

    Science.gov (United States)

    Piccialli, A.; López-Valverde, M. A.; Määttänen, A.; González-Galindo, F.; Audouard, J.; Altieri, F.; Forget, F.; Drossart, P.; Gondet, B.; Bibring, J. P.

    2016-06-01

    We report on daytime limb observations of Mars upper atmosphere acquired by the OMEGA instrument on board the European spacecraft Mars Express. The strong emission observed at 4.3 μm is interpreted as due to CO2 fluorescence of solar radiation and is detected at a tangent altitude in between 60 and 110 km. The main value of OMEGA observations is that they provide simultaneously spectral information and good spatial sampling of the CO2 emission. In this study we analyzed 98 dayside limb observations spanning over more than 3 Martian years, with a very good latitudinal and longitudinal coverage. Thanks to the precise altitude sounding capabilities of OMEGA, we extracted vertical profiles of the non-local thermodynamic equilibrium (non-LTE) emission at each wavelength and we studied their dependence on several geophysical parameters, such as the solar illumination and the tangent altitude. The dependence of the non-LTE emission on solar zenith angle and altitude follows a similar behavior to that predicted by the non-LTE model. According to our non-LTE model, the tangent altitude of the peak of the CO2 emission varies with the thermal structure, but the pressure level where the peak of the emission is found remains constant at ˜0.03 ± 0.01 Pa, . This non-LTE model prediction has been corroborated by comparing SPICAM and OMEGA observations. We have shown that the seasonal variations of the altitude of constant pressure levels in SPICAM stellar occultation retrievals correlate well with the variations of the OMEGA peak emission altitudes, although the exact pressure level cannot be defined with the spectroscopy for the investigation of the characteristics of the atmosphere of Venus (SPICAM) nighttime data. Thus, observed changes in the altitude of the peak emission provide us information on the altitude of the 0.03 Pa pressure level. Since the pressure at a given altitude is dictated by the thermal structure below, the tangent altitude of the peak emission represents

  9. Gold in erythrocytes, whole blood, and plasma during long-term chrysotherapy.

    Science.gov (United States)

    Pedersen, S M; Graabaek, P M

    1980-12-01

    The concentrations of gold in erythrocytes, whole blood, cell-rich plasma, and cell-free plasma were investigated in 17 patients with rheumatoid arthritis undergoing long-term chrysotherapy. Gold estimations were performed with a graphite tube atomic absorption spectrophotometer. Significant quantities of gold were found in isolated erythrocytes of 12 patients. There was no correlation between erythrocyte gold and therapeutic response, plasma gold, and gold in whole blood. Nor did gold in whole blood or plasma show any correlation with therapeutic responses and toxic reaction. However, all patients (3) with toxic reactions had a significantly higher gold concentration in the erythrocytes than the patients without toxic reactions. This result indicates that erythrocyte gold estimations could provide a useful warning of impeding toxic reactions.

  10. Quantitative spectroscopy of extreme helium stars Model atmospheres and a non-LTE abundance analysis of BD+10°2179

    Science.gov (United States)

    Kupfer, T.; Przybilla, N.; Heber, U.; Jeffery, C. S.; Behara, N. T.; Butler, K.

    2017-10-01

    Extreme helium stars (EHe stars) are hydrogen-deficient supergiants of spectral type A and B. They are believed to result from mergers in double degenerate systems. In this paper, we present a detailed quantitative non-LTE spectral analysis for BD+10°2179, a prototype of this rare class of stars, using UV-Visual Echelle Spectrograph and Fiber-fed Extended Range Optical Spectrograph spectra covering the range from ∼3100 to 10 000 Å. Atmosphere model computations were improved in two ways. First, since the UV metal line blanketing has a strong impact on the temperature-density stratification, we used the atlas12 code. Additionally, We tested atlas12 against the benchmark code sterne3, and found only small differences in the temperature and density stratifications, and good agreement with the spectral energy distributions. Secondly, 12 chemical species were treated in non-LTE. Pronounced non-LTE effects occur in individual spectral lines but, for the majority, the effects are moderate to small. The spectroscopic parameters give Teff =17 300±300 K and log g = 2.80±0.10, and an evolutionary mass of 0.55±0.05 M⊙. The star is thus slightly hotter, more compact and less massive than found in previous studies. The kinematic properties imply a thick-disc membership, which is consistent with the metallicity [Fe/H] ≈ -1 and α-enhancement. The refined light-element abundances are consistent with the white dwarf merger scenario. We further discuss the observed helium spectrum in an appendix, detecting dipole-allowed transitions from about 150 multiplets plus the most comprehensive set of known/predicted isolated forbidden components to date. Moreover, a so far unreported series of pronounced forbidden He I components is detected in the optical-UV.

  11. A non-LTE study of neutral and singly-ionized iron line spectra in 1D models of the Sun and selected late-type stars

    CERN Document Server

    Mashonkina, L; Shi, J -R; Korn, A J; Grupp, F

    2011-01-01

    A comprehensive model atom for Fe with more than 3000 energy levels is presented. As a test and first application of this model atom, Fe abundances are determined for the Sun and five stars with well determined stellar parameters and high-quality observed spectra. Non-LTE leads to systematically depleted total absorption in the Fe I lines and to positive abundance corrections in agreement with the previous studies, however, the magnitude of non-LTE effect is smaller compared to the earlier results. Non-LTE corrections do not exceed 0.1 dex for the solar metallicity and mildly metal-deficient stars, and they vary within 0.21 dex and 0.35 dex in the very metal-poor stars HD 84937 and HD 122563, respectively, depending on the assumed efficiency of collisions with hydrogen atoms. Based on the analysis of the Fe I/Fe II ionization equilibrium in these two stars, we recommend to apply the Drawin formalism in non-LTE studies of Fe with a scaling factor of 0.1. For the Fe II lines, non-LTE corrections do not exceed 0...

  12. Towards detecting methanol emission in low-mass protoplanetary discs with ALMA: The role of non-LTE excitation

    CERN Document Server

    Parfenov, S Yu; Sobolev, A M; Gray, M D

    2016-01-01

    The understanding of organic content of protoplanetary discs is one of the main goals of the planet formation studies. As an attempt to guide the observational searches for weak lines of complex species in discs, we modelled the (sub-)millimetre spectrum of gaseous methanol (CH$_3$OH), one of the simplest organic molecules, in the representative T Tauri system. We used 1+1D disc physical model coupled to the gas-grain ALCHEMIC chemical model with and without 2D-turbulent mixing. The computed CH$_3$OH abundances along with the CH$_3$OH scheme of energy levels of ground and excited torsional states were used to produce model spectra obtained with the non-local thermodynamic equilibrium (non-LTE) 3D line radiative transfer code LIME. We found that the modelled non-LTE intensities of the CH$_3$OH lines can be lower by factor of $>10$--$100$ than those calculated under assumption of LTE. Though population inversion occurs in the model calculations for many (sub-)millimetre transitions, it does not lead to the stro...

  13. Non-LTE Analysis of the Sodium Abundance of Metal-Poor Stars in the Galactic Disk and Halo

    Institute of Scientific and Technical Information of China (English)

    Yoichi Takeda; Gang Zhao; Masahide Takada-Hidai; Yu-Qin Chen; Yu-ji Saito; Hua-Wei Zhang

    2003-01-01

    We performed an extensive non-LTE analysis of the neutral sodiumlines of Na I 5683/5688, 5890/5896, 6154/6161, and 8183/8195 in disk/halo starsof types F-K covering a wide metallicity range (-4 [Fe/H] +0.4), using ourown data as well as data collected from the literature. For comparatively metal-rich disk stars (-1 [Fe/H] +0.4) where the weaker 6154/6161 lines are thebest abundance indicators, we confirmed [Na/Fe] ~ 0 with an "upturn" (i.e., ashallow/broad dip around -0.5 [Fe/H] 0) as already reported in previousstudies. For the metal-deficient halo stars, where the much stronger 5890/5896 or8183/8195 lines subject to considerable (negative) non-LTE corrections amountingto 0.5 dex have to be used, our analysis suggests mildly "subsolar" [Na/Fe] valuesdown to ~ -0.4 (with a somewhat large scatter of ~±0.2 dex) on the average at thetypical halo metallicity of [Fe/H] ~ -2, followed by a rise again to a near-solar ratioof [Na/Fe] ~ 0 at the very metal-poor regime [Fe/H] ~ -3 to -4. These resultsare discussed in comparison with the previous observational studies along with thetheoretical predictions from the available chemical evolution models.

  14. A non-LTE study of silicon abundances in giant stars from the Si I infrared lines in the zJ-band

    CERN Document Server

    Tan, Kefeng; Takada-Hidai, Masahide; Takeda, Yoichi; Zhao, Gang

    2016-01-01

    We investigate the feasibility of the Si I infrared (IR) lines as Si abundance indicators for giant stars. We find that Si abundances obtained from the Si I IR lines based on the local thermodynamic equilibrium (LTE) analysis show large line-to-line scatter (mean value of 0.13dex), and are higher than those from the optical lines. However, when the non-LTE effects are taken into account, the line-to-line scatter reduces significantly (mean value of 0.06dex), and the Si abundances are consistent with those from the optical lines. The typical average non-LTE correction of [Si/Fe] for our sample stars is about $-$0.35dex. Our results demonstrate that the Si I IR lines could be reliable abundance indicators provided that the non-LTE effects are properly taken into account.

  15. Carbon monoxide and temperature in the upper atmosphere of Venus from VIRTIS/Venus Express non-LTE limb measurements

    Science.gov (United States)

    Gilli, G.; López-Valverde, M. A.; Peralta, J.; Bougher, S.; Brecht, A.; Drossart, P.; Piccioni, G.

    2015-03-01

    The upper mesosphere and the lower thermosphere of Venus (from 90 to 150 km altitude) seems to play a transition region in photochemistry, dynamics and radiation, but is still very poorly constrained observationally. Since 2006 VIRTIS on board Venus Express has been obtaining limb observations of CO fluorescent infrared emissions in a systematic manner. This study represents the scientific exploitation of this dataset and reports new information on the composition and temperature at those altitudes. This work is focused on the 4.7 μ m emission of CO as observed by VIRTIS, which contains two emission bands, the fundamental and the first hot of the main CO isotope. A specific scheme for a simultaneous retrieval of CO and temperature is proposed, based on results of a comprehensive non-LTE model of these molecular emissions. A forward model containing such non-LTE model is used at the core of an inversion scheme that consists of two steps: (i) a minimization procedure of model-data differences and (ii) a linear inversion around the solution of the first step. A thorough error analysis is presented, which shows that the retrievals of CO and temperature are very noisy but can be improved by suitable averaging of data. These averages need to be consistent with the non-LTE nature of the emissions. Unfortunately, the data binning process reduced the geographical coverage of the results. The obtained retrieval results indicate a global distribution of the CO in the Venus dayside with a maximum around the sub-solar point, and a decrease of a factor 2 towards high latitudes. Also a gradient from noon to the morning and evening sides is evident in the equator, this being smaller at high latitudes. No morning-afternoon differences in the CO concentration are observed, or are comparable to our retrieval errors. All this argues for a CO distribution controlled by dynamics in the lower thermosphere, with a dominant sub-solar to anti-solar gradient. Similar variations are found

  16. Towards detecting methanol emission in low-mass protoplanetary discs with ALMA: the role of non-LTE excitation

    Science.gov (United States)

    Parfenov, S. Yu.; Semenov, D. A.; Sobolev, A. M.; Gray, M. D.

    2016-08-01

    The understanding of organic content of protoplanetary discs is one of the main goals of the planet formation studies. As an attempt to guide the observational searches for weak lines of complex species in discs, we modelled the (sub)millimetre spectrum of gaseous methanol (CH3OH), one of the simplest organic molecules, in the representative T Tauri system. We used 1+1D disc physical model coupled to the gas-grain ALCHEMIC chemical model with and without 2D-turbulent mixing. The computed CH3OH abundances along with the CH3OH scheme of energy levels of ground and excited torsional states were used to produce model spectra obtained with the non-local thermodynamic equilibrium (non-LTE) 3D line radiative transfer code LIME. We found that the modelled non-LTE intensities of the CH3OH lines can be lower by factor of >10-100 than those calculated under assumption of LTE. Though population inversion occurs in the model calculations for many (sub)millimetre transitions, it does not lead to the strong maser amplification and noticeably high line intensities. We identify the strongest CH3OH (sub)millimetre lines that could be searched for with the Atacama Large Millimeter Array (ALMA) in nearby discs. The two best candidates are the CH3OH 50 - 40A+ (241.791 GHz) and 5-1 - 4-1E (241.767 GHz) lines, which could possibly be detected with the ˜5σ signal-to-noise ratio after ˜3 h of integration with the full ALMA array.

  17. Iterative Methods for the Non-LTE Transfer of Polarized Radiation: Resonance Line Polarization in One-dimensional Atmospheres

    Science.gov (United States)

    Trujillo Bueno, Javier; Manso Sainz, Rafael

    1999-05-01

    This paper shows how to generalize to non-LTE polarization transfer some operator splitting methods that were originally developed for solving unpolarized transfer problems. These are the Jacobi-based accelerated Λ-iteration (ALI) method of Olson, Auer, & Buchler and the iterative schemes based on Gauss-Seidel and successive overrelaxation (SOR) iteration of Trujillo Bueno and Fabiani Bendicho. The theoretical framework chosen for the formulation of polarization transfer problems is the quantum electrodynamics (QED) theory of Landi Degl'Innocenti, which specifies the excitation state of the atoms in terms of the irreducible tensor components of the atomic density matrix. This first paper establishes the grounds of our numerical approach to non-LTE polarization transfer by concentrating on the standard case of scattering line polarization in a gas of two-level atoms, including the Hanle effect due to a weak microturbulent and isotropic magnetic field. We begin demonstrating that the well-known Λ-iteration method leads to the self-consistent solution of this type of problem if one initializes using the ``exact'' solution corresponding to the unpolarized case. We show then how the above-mentioned splitting methods can be easily derived from this simple Λ-iteration scheme. We show that our SOR method is 10 times faster than the Jacobi-based ALI method, while our implementation of the Gauss-Seidel method is 4 times faster. These iterative schemes lead to the self-consistent solution independently of the chosen initialization. The convergence rate of these iterative methods is very high; they do not require either the construction or the inversion of any matrix, and the computing time per iteration is similar to that of the Λ-iteration method.

  18. Some Thoughts on the Role of non-LTE Physics in ICF

    Energy Technology Data Exchange (ETDEWEB)

    Colvin, J. D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-03-07

    An effort to develop sub-critical-density high-Z metal-doped and pure metal foams as laser-driven x-ray sources is described. The main idea is that the laser beams preferentially heat the electrons, and if the plasma is sufficiently low density so that the heating rate is greater than the equilibration rate via electron-ion collisions, then the electron temperature in the plasma is much greater than the ion temperature as long as the laser is on. In such a situation the plasma is not in local thermal equilibrium (LTE), it heats supersonically and volumetrically, and the conversion efficiency of laser beam energy to multi-keV L-shell and K-shell radiation is much higher than what it would be in LTE plasma.

  19. Kinetic Requirements for the Measurement of Mesospheric Water Vapor at 6.8 (microns) under Non-LTE Conditions

    Science.gov (United States)

    Zhou, Daniel K.; Mlynczak, Martin G.; Lopez-Puertas, Manuel; Russell, James M., III

    1999-01-01

    We present accuracy requirements for specific kinetic parameters used to calculate the populations and vibrational temperatures of the H2O(010) and H2O(020) states in the terrestrial mesosphere. The requirements are based on rigorous simulations of the retrieval of mesospheric water vapor profiles from measurements of water vapor infrared emission made by limb scanning instruments on orbiting satellites. Major improvements in the rate constants that describe vibration-to- vibration exchange between the H2O(010) and 02(1) states are required in addition to improved specification of the rate of quenching Of O2(1) by atomic oxygen (0). It is also necessary to more accurately determine the yield of vibrationally excited O2(l) resulting from ozone photolysis. A contemporary measurement of the rate of quenching of H2O(010) by N2 and O2 is also desirable. These rates are either highly uncertain or have never before been measured at atmospheric temperatures. The suggested improvements are necessary for the interpretation of water vapor emission measurements at 6.8 microns to be made from a new spaceflight experiment in less than 2 years. The approach to retrieving water vapor under non-LTE conditions is also presented.

  20. Three-dimensional non-LTE radiative transfer effects in Fe I lines I. Flux sheet and flux tube geometries

    CERN Document Server

    Holzreuter, R

    2012-01-01

    In network and active region plages, the magnetic field is concentrated into structures often described as flux tubes (FTs) and sheets (FSs). 3-D radiative transfer (RT) is important for energy transport in these concentrations. It is also expected to be important for diagnostic purposes but has rarely been applied for that purpose. Using true 3-D, non-LTE (NLTE) RT in FT/FS models, we compute Fe line profiles commonly used to diagnose the Sun's magnetic field by comparing the results with those obtained from LTE/1-D (1.5-D) NLTE calculations. Employing a multilevel iron atom, we study the influence of basic parameters such as Wilson depression, wall thickness, radius/width, thermal stratification or magnetic field strength on all Stokes $I$ parameters in the thin-tube approximation. The use of different levels of approximations of RT may lead to considerable differences in profile shapes, intensity contrasts, equivalent widths, and the determination of magnetic field strengths. In particular, LTE, which ofte...

  1. Self-consistent Non-LTE Model of Infrared Molecular Emissions and Oxygen Dayglows in the Mesosphere and Lower Thermosphere

    Science.gov (United States)

    Feofilov, Artem G.; Yankovsky, Valentine A.; Pesnell, William D.; Kutepov, Alexander A.; Goldberg, Richard A.; Mauilova, Rada O.

    2007-01-01

    We present the new version of the ALI-ARMS (for Accelerated Lambda Iterations for Atmospheric Radiation and Molecular Spectra) model. The model allows simultaneous self-consistent calculating the non-LTE populations of the electronic-vibrational levels of the O3 and O2 photolysis products and vibrational level populations of CO2, N2,O2, O3, H2O, CO and other molecules with detailed accounting for the variety of the electronic-vibrational, vibrational-vibrational and vibrational-translational energy exchange processes. The model was used as the reference one for modeling the O2 dayglows and infrared molecular emissions for self-consistent diagnostics of the multi-channel space observations of MLT in the SABER experiment It also allows reevaluating the thermalization efficiency of the absorbed solar ultraviolet energy and infrared radiative cooling/heating of MLT by detailed accounting of the electronic-vibrational relaxation of excited photolysis products via the complex chain of collisional energy conversion processes down to the vibrational energy of optically active trace gas molecules.

  2. Air plasma assisting microcontact deprinting and printing for gold thin film and PDMS patterns.

    Science.gov (United States)

    Gou, Hong-Lei; Xu, Jing-Juan; Xia, Xing-Hua; Chen, Hong-Yuan

    2010-05-01

    In this paper, we present a simple method to fabricate gold film patterns and PDMS patterns by air plasma assisting microcontact deprinting and printing transfer approaches. Chemical gold plating is employed instead of conventional metal evaporation or sputtering to obtain perfect gold film both on flat and topographic PDMS chips, and complicated SAM precoating is replaced by simple air plasma treatment to activate both the surface of gold film and PDMS. In this way, large area patterns of conductive gold film and PDMS patterns could be easily obtained on the elastomeric PDMS substrate. Both the chemical plating gold film and transferred gold film were of good electrochemical properties and similar hydrophilicity with smooth and conductive surface, which made it potentially useful in microfluidic devices and electronics. The gold transfer mechanism is discussed in detail. For typical applications, a cell patterning chip based on the gold pattern was developed to imply the interfacial property, and dielectrophoresis control of live cells was carried out with the patterned gold as interdigital electrodes to show the conductivity.

  3. A Non-LTE Study of Silicon Abundances in Giant Stars from the Si I Infrared Lines in the zJ-Band

    Science.gov (United States)

    Tan, Kefeng; Shi, Jianrong; Takada-Hidai, Masahide; Takeda, Yoichi; Zhao, Gang

    2016-05-01

    We investigate the feasibility of Si i infrared (IR) lines as Si abundance indicators for giant stars. We find that Si abundances obtained from the Si i IR lines based on the local thermodynamic equilibrium (LTE) analysis show large line-to-line scatter (mean value of 0.13 dex), and are higher than those from the optical lines. However, when non-LTE effects are taken into account, the line-to-line scatter reduces significantly (mean value of 0.06 dex), and the Si abundances are consistent with those from the optical lines. The typical average non-LTE correction of [Si/Fe] for our sample stars is about -0.35 dex. Our results demonstrate that the Si i IR lines could be reliable abundance indicators, provided that the non-LTE effects are properly taken into account. Based on data collected at the Subaru Telescope, which is operated by the National Astronomical Observatory of Japan; based on observations made with ESO telescopes at the La Silla Paranal Observatory under programme IDs 266.D-5655(A) and 084.D-0912(A); based on observations carried out at the National Astronomical Observatories (Xinglong, China).

  4. Time dependent non-LTE calculations of ionisation in the early universe

    CERN Document Server

    Wehrse, R; Davé, R; Dav\\'e, Romeel

    2005-01-01

    We present a new implicit numerical algorithm for the calculation of the time dependent non-Local Thermodynamic Equilibrium of a gas in an external radiation field that is accurate, fast and unconditionally stable for all spatial and temporal increments. The method is presented as a backward difference scheme in 1-D but can be readily generalised to 3-D. We apply the method for calculating the evolution of ionisation domains in a hydrogen plasma with plane-parallel Gaussian density enhancements illuminated by sources of UV radiation. We calculate the speed of propagation of ionising fronts through different ambient densities and the interaction of such ionising fronts with density enhancements. We show that for a typical UV source that may be present in the early universe, the introduction of a density enhancement of a factor ~10 above an ambient density 10^{-4} atoms/cm^3 could delay the outward propagation of an ionisation front by millions of years. Our calculations show that within the lifetime of a singl...

  5. Quantification of non-LTE contributions to OH rotational temperatures based on VLT/X-shooter, VLT/UVES, and TIMED/SABER data

    Science.gov (United States)

    Noll, Stefan; Kausch, Wolfgang; Kimeswenger, Stefan; Proxauf, Bastian; Unterguggenberger, Stefanie; Jones, Amy M.

    2016-04-01

    The hydroxyl (OH) airglow emission is very valuable for estimating atmospheric temperatures at about 87 km because it is relatively easy to measure. The usual approach is based on intensity ratios of OH lines with low rotational upper levels of a given band and the assumption of a Boltzmann distribution of the level populations consistent with the ambient temperature. However, this assumption can be unrealistic if the frequency of thermalising collisions is too low, which is most likely at the highest emission altitudes. We have investigated the amounts of possible non-LTE contributions to the measured OH rotational temperatures depending on the selected lines, band, and time of observation. For this, we used several hundred spectra from the echelle spectrograph X-shooter at the Very Large Telescope (VLT) at Cerro Paranal in Chile. These data with a very wide wavelength coverage allowed us to simultaneously measure temperatures for 25 OH bands and two O2 bands. The latter were used to obtain reference temperatures, which is possible since the radiative lifetimes of the upper states are sufficiently long for establishing full thermalisation for the populations of the different rotational levels. For a comparison of the resulting temperatures, a correction of the different emission altitudes is required. Hence, we also used CO2-based temperature and OH and O2 emission profile data from the SABER multi-channel radiometer on the TIMED satellite. The altitude-corrected OH rotational temperatures show significant non-LTE effects for higher vibrational levels of the upper state v' and especially even v'. The maximum deviations of more than 10 K were found for v' = 8. The non-LTE effects can vary within a range of a few K. The studied nocturnal variations indicate that the non-LTE contributions increase when the emission layer rises. Finally, we will also present first results for several thousand spectra taken with the VLT high-resolution optical echelle spectrograph UVES

  6. Non-LTE Stellar Population Synthesis of Globular Clusters Using Synthetic Integrated Light Spectra. I. Constructing the IL Spectra

    Science.gov (United States)

    Young, Mitchell. E.; Short, C. Ian

    2017-02-01

    We present an investigation of the globular cluster population synthesis method of McWilliam & Bernstein, focusing on the impact of non-LTE (NLTE) modeling effects and color–magnitude diagram (CMD) discretization. Johnson–Cousins–Bessel U – B, B-V, V-I, and J-K colors are produced for 96 synthetic integrated light (IL) spectra with two different discretization prescriptions and three degrees of NLTE treatment. These color values are used to compare NLTE- and LTE-derived population ages. Relative contributions of different spectral types to the IL spectra for different wavebands are measured. IL NLTE spectra are shown to be more luminous in the UV and optical than LTE spectra, but show stronger absorption features in the IR. The main features showing discrepancies between NLTE and LTE IL spectra may be attributed to light metals, primarily Fe i, Ca i, and Ti i, as well as TiO molecular bands. Main-sequence stars are shown to have negligible NLTE effects at IR wavelengths compared to more evolved stars. Photometric color values are shown to vary at the millimagnitude level as a function of CMD discretization. Finer CMD sampling for the upper main sequence and turnoff, base of the red giant branch, and the horizontal branch minimizes this variation. Differences in ages derived from LTE and NLTE IL spectra are found to range from 0.55 to 2.54 Gyr, comparable to the uncertainty in GC ages derived from color indices with observational uncertainties of 0.01 mag, the limiting precision of the Harris catalog.

  7. How Do Type Ia Supernova Nebular Spectra Depend on Explosion Properties? Insights from Systematic Non-LTE Modeling

    Science.gov (United States)

    Botyánszki, János; Kasen, Daniel

    2017-08-01

    We present a radiative transfer code to model the nebular phase spectra of supernovae (SNe) in non-LTE (NLTE). We apply it to a systematic study of SNe Ia using parameterized 1D models and show how nebular spectral features depend on key physical parameters, such as the time since explosion, total ejecta mass, kinetic energy, radial density profile, and the masses of 56Ni, intermediate-mass elements, and stable iron-group elements. We also quantify the impact of uncertainties in atomic data inputs. We find the following. (1) The main features of SN Ia nebular spectra are relatively insensitive to most physical parameters. Degeneracy among parameters precludes a unique determination of the ejecta properties from spectral fitting. In particular, features can be equally well fit with generic Chandrasekhar mass ({M}{ch}), sub-{M}{Ch}, and super-{M}{Ch} models. (2) A sizable (≳0.1 {M}⊙ ) central region of stable iron-group elements, often claimed as evidence for {M}{Ch} models, is not essential to fit the optical spectra and may produce an unusual flat-top [Co iii] profile. (3) The strength of [S iii] emission near 9500 Å can provide a useful diagnostic of explosion nucleosynthesis. (4) Substantial amounts (≳0.1 {M}⊙ ) of unburned C/O mixed throughout the ejecta produce [O iii] emission not seen in observations. (5) Shifts in the wavelength of line peaks can arise from line-blending effects. (6) The steepness of the ejecta density profile affects the line shapes, offering a constraint on explosion models. (7) Uncertainties in atomic data limit the ability to infer physical parameters.

  8. Variability of OH rotational temperatures on time scales from hours to 15 years by kinetic temperature variations, emission layer changes, and non-LTE effects

    Science.gov (United States)

    Noll, Stefan

    2016-07-01

    Rotational temperatures derived from hydroxyl (OH) line emission are frequently used to study atmospheric temperatures at altitudes of about 87 km. While the measurement only requires intensities of a few bright lines of an OH band, the interpretation can be complicated. Ground-based temperatures are averages for the entire, typically 8 km wide emission layer. Variations in the rotational temperature are then caused by changes of the kinetic temperature and the OH emission profile. The latter can also be accompanied by differences in the layer-averaged efficiency of the thermalisation of the OH rotational level populations. Since this especially depends on the frequency of collisions with O_2, which is low at high altitudes, the non-local thermodynamic equilibrium (non-LTE) contribution to the measured temperatures can be significant and variable. In order to understand the impact of the different sources of OH rotational temperature variations from time scales of hours to a solar cycle, we have studied spectra from the astronomical echelle spectrographs X-shooter and UVES located at Cerro Paranal in Chile. While the X-shooter data spanning 3.5 years allowed us to measure temperatures for 25 OH and two O_2 bands, the UVES spectra cover no more than 10 OH bands simultaneously but a period of about 15 years. These data have been complemented by kinetic temperature and OH and O_2 emission profiles from the multi-channel radiometer SABER on the TIMED satellite. Taking the O_2 and SABER kinetic temperatures as reference and considering the different band-dependent emission profiles, we could evaluate the contribution of non-LTE effects to the measured OH rotational temperatures depending on line set, band, and time. Non-LTE contributions are significant for most bands and can exceed 10 K. The amplitudes of their average nocturnal and seasonal variation are of the order of 1 to 2 K.

  9. Three-dimensional non-LTE radiative transfer computation of the Ca 8542 infrared line from a radiation-MHD simulation

    CERN Document Server

    Leenaarts, J; Hansteen, V; van der Voort, L Rouppe

    2009-01-01

    Interpretation of imagery of the solar chromosphere in the widely used \\CaIIIR infrared line is hampered by its complex, three-dimensional and non-LTE formation. Forward modelling is required to aid understanding. We use a 3D non-LTE radiative transfer code to compute synthetic \\CaIIIR images from a radiation-MHD simulation of the solar atmosphere spanning from the convection zone to the corona. We compare the simulation with observations obtained with the CRISP filter at the Swedish 1--m Solar Telescope. We find that the simulation reproduces dark patches in the blue line wing caused by Doppler shifts, brightenings in the line core caused by upward-propagating shocks and thin dark elongated structures in the line core that form the interface between upward and downward gas motion in the chromosphere. The synthetic line core is narrower than the observed one, indicating that the sun exhibits both more vigorous large-scale dynamics as well as small scale motions that are not resolved within the simulation, pre...

  10. Protein retention on plasma-treated hierarchical nanoscale gold-silver platform

    Science.gov (United States)

    Fang, Jinghua; Levchenko, Igor; Mai-Prochnow, Anne; Keidar, Michael; Cvelbar, Uros; Filipic, Gregor; Han, Zhao Jun; Ostrikov, Kostya (Ken)

    2015-08-01

    Dense arrays of gold-supported silver nanowires of about 100 nm in diameter grown directly in the channels of nanoporous aluminium oxide membrane were fabricated and tested as a novel platform for the immobilization and retention of BSA proteins in the microbial-protective environments. Additional treatment of the silver nanowires using low-temperature plasmas in the inductively-coupled plasma reactor and an atmospheric-pressure plasma jet have demonstrated that the morphology of the nanowire array can be controlled and the amount of the retained protein may be increased due to the plasma effect. A combination of the neutral gold sublayer with the antimicrobial properties of silver nanowires could significantly enhance the efficiency of the platforms used in various biotechnological processes.

  11. Protein retention on plasma-treated hierarchical nanoscale gold-silver platform

    Science.gov (United States)

    Fang, Jinghua; Levchenko, Igor; Mai-Prochnow, Anne; Keidar, Michael; Cvelbar, Uros; Filipic, Gregor; Han, Zhao Jun; Ostrikov, Kostya (Ken)

    2015-01-01

    Dense arrays of gold-supported silver nanowires of about 100 nm in diameter grown directly in the channels of nanoporous aluminium oxide membrane were fabricated and tested as a novel platform for the immobilization and retention of BSA proteins in the microbial-protective environments. Additional treatment of the silver nanowires using low-temperature plasmas in the inductively-coupled plasma reactor and an atmospheric-pressure plasma jet have demonstrated that the morphology of the nanowire array can be controlled and the amount of the retained protein may be increased due to the plasma effect. A combination of the neutral gold sublayer with the antimicrobial properties of silver nanowires could significantly enhance the efficiency of the platforms used in various biotechnological processes. PMID:26307515

  12. A method for studies on interactions between a gold-based drug and plasma proteins based on capillary electrophoresis with inductively coupled plasma mass spectrometry detection

    DEFF Research Database (Denmark)

    Nguyen, Tam T T N; Østergaard, Jesper; Gammelgaard, Bente

    2015-01-01

    An analytical method based on capillary electrophoresis (CE) and inductively coupled plasma mass spectrometry (ICP-MS) detection was developed for studies on the interaction of gold-containing drugs and plasma proteins using auranofin as example. A detection limit of 18 ng/mL of auranofin...... was the major auranofin-interacting protein in plasma. The CE-ICP-MS method is proposed as a novel approach for kinetic studies of the interactions between gold-based drugs and plasma proteins. Graphical Abstract Development of a CE-ICP-MS based method allows for studies on interaction of the gold containing...

  13. Synergistic effect of gold nanoparticles and cold plasma on glioblastoma cancer therapy

    Science.gov (United States)

    Cheng, Xiaoqian; Murphy, William; Recek, Nina; Yan, Dayun; Cvelbar, Uros; Vesel, Alenka; Mozetič, Miran; Canady, Jerome; Keidar, Michael; Sherman, Jonathan H.

    2014-08-01

    Gold nanoparticles (AuNPs) have been investigated as a promising reagent for cancer therapy in various fields. In the meantime, cold atmospheric plasma has shown exquisite selectivity towards cancer cells. In this paper, we demonstrate that there is a synergy between gold nanoparticles and cold atmospheric plasma in cancer therapy. Specifically, the concentration of AuNPs plays an important role on plasma therapy. At an optimal concentration, gold nanoparticles can significantly induce glioblastoma (U87) cell death up to a 30% overall increase compared to the control group with the same plasma dosage but no AuNPs applied. The reactive oxygen species (ROS) intensity of the corresponding conditions has a reversed trend compared to cell viability. This matches with the theory that intracellular ROS accumulation results in oxidative stress, which further changes the intracellular pathways, causing damage to the proteins, lipids and DNA. Our results show that this synergy has great potential in improving the efficiency of cancer therapy and reducing harm to normal cells.

  14. Second-Order Nonlinearity in Triangular Lattice Perforated Gold Film due to Surface Plasmas Resonance

    Directory of Open Access Journals (Sweden)

    Renlong Zhou

    2014-01-01

    Full Text Available We have studied the excitation second-order nonlinearity through a triangular lattice perforated gold film instead of square lattice in many papers. Under the excitation of surface plasmas resonance effect, the second order nonlinearity exists in the noncentrosymmetric split-ring resonators arrays. Reflection of fundamental frequency wave through a triangular lattice perforated gold film is obtained. We also described the second harmonic conversion efficiencies in the second order nonlinear optical process with the spectra. Moreover, the electric field distributions of fundamental frequency above the gold film region are calculated. The light propagation through the holes results in the enhancement of the second order nonlinearity including second harmonic generation as well as the sum (difference frequency generation.

  15. Computational characterization of plasma effects in ultrafast laser irradiation of spherical gold nanostructures for photothermal therapy

    Science.gov (United States)

    Hatef, Ali; Darvish, Behafarid; Burke, Adam; Dagallier, Adrien; Meunier, Michel

    2016-03-01

    Ultrashort pulsed lasers can provide high peak intensity with low pulse fluence. This makes them an ideal choice in photothermal therapy and applications where damage to the surrounding material needs to be minimized. Depending on the peak intensity, the ultrashort pulsed laser’s interaction with matter can lead to plasma formation through nonlinear effects such as multiphoton and impact electron excitation. The capability of the spherical gold nanoparticles, as the most employed nanoparticle so far for photothermal therapy, to enhance and strongly localize the incident laser field leads to plasma formation around the particles at even lower pulse fluences. Under certain circumstances, during the pulse duration, this plasma can absorb more energy than the nanoparticle itself. Consequently, the absorbed energy by the generated plasma can act as an energy source for different phenomena such as the evolution of the temperature distribution, thermoelastic stress generation, and stress-induced bubble formation. In this paper, we study the plasma-mediated interaction of a 45 fs pulsed laser with two types of spherical gold nanoparticles in water: solid nanoparticle and core-shell (silica-gold) nanoparticle. We use a numerical framework based on the finite element method (FEM) to compare energy deposition profiles in these nanoparticles and in their surrounding plasma, by focusing on the impact of the nanoparticle size and the laser fluence. Our calculations show that the maximum energy deposition in plasma occurs in core-shell nanoparticles with a diameter of 130 nm and the ratio of core to shell radius of 0.8 and in solid nanoparticles with a diameter of 170 nm.

  16. Imaging gold nanoparticles in mouse liver by laser ablation inductively coupled plasma mass spectrometry

    OpenAIRE

    Li, Qing; Wang, Zheng; Mo, Jiamei; Zhang, Guoxia; Chen, Yirui; Huang, Chuchu

    2017-01-01

    Imaging the size distribution of metal nanoparticles (NPs) in a tissue has important implications in terms of evaluating NP toxicity. Microscopy techniques used to image tissue NPs are limited by complicated sample preparation or poor resolution. In this study, we developed a laser ablation (LA) system coupled to single-particle inductively coupled plasma mass spectrometry (SP-ICP-MS) for quantitative imaging of gold (G)NPs in tissue samples. In this system, GNPs were ablated but did not disi...

  17. Molecular distribution of gold(I) in human blood plasma after treatment with the antiarthritic disodium aurothiomalate.

    Science.gov (United States)

    Rayner, M H; Grootveld, M; Sadler, P J

    1989-01-01

    On-line separation and detection of both high- and low-molecular-weight gold species in human blood plasma treated with disodium aurothiomalate were achieved by a technique incorporating a combination of fast protein liquid chromatography with continuous monitoring of absorbance at 254 nm and eluant gold concentration by flame atomic absorption spectroscopy. The fate of gold (40 microM disodium aurothiomalate) in human blood plasma was monitored over a period of 24 h. Results obtained indicated that more than 50% of the gold is associated with a peak identified as albumin after a 5 min incubation period at 37 degrees C, and by 30 min more than 90% is found to be associated with albumin. This novel analytical combination enables the rapid, selective and sensitive determination of gold(I) and its biotransformation products (both protein--and non-protein-bound) in biological fluids.

  18. Gold upgrading in metamorphosed massive sulfide ore deposits: Direct evidence from laser-ablation-inductively coupled plasma-mass spectrometry analysis of invisible gold

    Science.gov (United States)

    Wagner, Thomas; Klemd, Reiner; Wenzel, Thomas; Mattsson, Benny

    2007-09-01

    The metamorphosed Boliden volcanic-hosted massive sulfide (VHMS) ore deposit, northern Sweden, is characterized by an abundance of massive arsenopyrite ore and unusually high gold enrichments (up to 300-600 g/t) in crosscutting veins and fracture zones. The ore textures observed record progressive recrystallization and porphyroblast growth during meta morphism. We conducted a systematic laser-ablation-inductively coupled plasma-mass spectrom etry (LA-ICP-MS) study on the gold distribution in fine-grained massive arseno-pyrite and pyrite ore, partially recrystallized arsenopyrite ore, and both arsenopyrite and pyrite porphyroblasts found in gold-rich veins. The gold concentrations in massive arseno-pyrite are highest (30-50 ppm on average) and systematically decrease to 0-2.7 ppm with increasing degree of recrystallization. By contrast, gold concentrations in pyrite ore are much lower and do not exceed 0.2 ppm. The LA-ICP-MS data, coupled with textural data, provide the first direct conclusive evidence that gold is progressively liberated from massive sulfide ores during metamorphism and reprecipitated in veins and other low-strain sites. We suggest that such upgrading is the principal mechanism responsible for significant gold enrichment observed in many metamorphosed VHMS deposits worldwide.

  19. Opacity measurement of a gold plasma at T{sub e} = 85 eV

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Jiyan; Yang Jiamin; Yang Guohong; Li Hang; Yuan Zheng; Zhao Yang; Xiong Gang; Bao Lihua; Huang Chenwu; Ding Yongkun; Zhang Baohan; Zheng Zhijian [Research Center of Laser Fusion, P. O. Box 919-986, Mianyang 621900 (China); Xu Yan; Wu Zheqing; Yan Jun [Institute of Applied Physics and Computational Mathematics, Beijing 100088 (China)

    2011-11-15

    The opacity of a gold plasma at the temperature of 85 eV and density of 0.02 g/cm{sup 3} was measured over the energy range from 150 eV to 1200 eV. The gold sample was heated by thermal x-ray radiation generated with a foam-baffled gold cavity. The sample transmission was obtained from the backlight, absorption and self-emission spectra measured by a time-gated, spatially resolved grating spectrometer, with the backlight and absorption spectra being measured simultaneously in a single shot and the self-emission in another shot. The temperature and density of the gold absorber were determined by the hydrodynamic simulation with Multi-1D code, which was partially tested by the reemission radiative flux measurements of the heated sample. This work permits the first test of opacity models over the photon energy range that dominates the Rosseland mean opacity at the temperature of interest for the inertial confinement fusion.

  20. Determination of Trace Elements in High Purity Gold by High Resolution Inductively Coupled Plasma Mass Spectrometry

    Institute of Scientific and Technical Information of China (English)

    XIE Hualin; HUANG Kelong; NIE Xidu; FU Liang

    2009-01-01

    Trace elements were determined in high purity gold by high resolution inductively coupled plasma mass spectrometry(HR-ICP-MS).Sample were decomposed by aqua regia.To overcome some potentially problematic spectral interference,measurements were acquired in both medium and high resolution modes.The matrix effects due to the presence of excessive HCl and Au were evaluated.The optimum conditions for the determination was tested and discussed.The standard addition method was employed for quantitative analysis.The detection limits range from 0.01 μg/g to 0.28 μg/g depending on the elements.The method is accurate,quick and convenient.It has been applied to the determination of trace elements in high purity gold with satisfactory results.

  1. Ultra-small platinum and gold nanoparticles by arc plasma deposition

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sang Hoon, E-mail: kim_sh@kist.re.kr [Center for Materials Architecturing, Korea Institute of Science and Technology (KIST), Seoul 136-791 (Korea, Republic of); Jeong, Young Eun; Ha, Heonphil; Byun, Ji Young [Center for Materials Architecturing, Korea Institute of Science and Technology (KIST), Seoul 136-791 (Korea, Republic of); Kim, Young Dok [Department of Chemistry, Sungkyunkwan University, Suwon 440-746 (Korea, Republic of)

    2014-04-01

    Highlights: • Ultra-small (<2 nm) and bigger platinum and gold nanoparticles were produced by arc plasma deposition (APD). • Size and coverage of deposited nanoparticles were easily controlled with APD parameters. • Crystalline structures of deposited nanoparticles emerged only when the particle size was bigger than ∼2 nm. - Abstract: Ultra-small (<2 nm) nanoparticles of platinum and gold were produced by arc plasma deposition (APD) in a systematic way and the deposition behavior was studied. Nanoparticles were deposited on two dimensional amorphous carbon and amorphous titania thin films and characterized by transmission electron microscopy (TEM). Deposition behavior of nanoparticles by APD was studied with discharge voltage (V), discharge condenser capacitance (C), and the number of plasma pulse shots (n) as controllable parameters. The average size of intrinsic nanoparticles generated by APD process was as small as 0.9 nm and deposited nanoparticles began to have crystal structures from the particle size of about 2 nm. V was the most sensitive parameter to control the size and coverage of generated nanoparticles compared to C and n. Size of APD deposited nanoparticles was also influenced by the nature of evaporating materials and substrates.

  2. Evidence of a significant rotational non-LTE effect in the CO2 4.3 µm PFS-MEX limb spectra

    Science.gov (United States)

    Kutepov, Alexander A.; Rezac, Ladislav; Feofilov, Artem G.

    2017-01-01

    Since January 2004, the planetary Fourier spectrometer (PFS) on board the Mars Express satellite has been recording near-infrared limb spectra of high quality up to the tangent altitudes ≈ 150 km, with potential information on density and thermal structure of the upper Martian atmosphere. We present first results of our modeling of the PFS short wavelength channel (SWC) daytime limb spectra for the altitude region above 90 km. We applied a ro-vibrational non-LTE model based on the stellar astrophysics technique of accelerated lambda iteration (ALI) to solve the multi-species and multi-level CO2 problem in the Martian atmosphere. We show that the long-standing discrepancy between observed and calculated spectra in the cores and wings of 4.3 µm region is explained by the non-thermal rotational distribution of molecules in the upper vibrational states 10011 and 10012 of the CO2 main isotope second hot (SH) bands above 90 km altitude. The redistribution of SH band intensities from band branch cores into their wings is caused (a) by intensive production of the CO2 molecules in rotational states with j > 30 due to the absorption of solar radiation in optically thin wings of 2.7 µm bands and (b) by a short radiative lifetime of excited molecules, which is insufficient at altitudes above 90 km for collisions to maintain rotation of excited molecules thermalized. Implications for developing operational algorithms for massive processing of PFS and other instrument limb observations are discussed.

  3. VLT spectroscopy and non-LTE modeling of the C/O-dominated accretion disks in two ultracompact X-ray binaries

    CERN Document Server

    Werner, K; Hammer, N J; Nagel, T; Rauch, T

    2006-01-01

    We present new medium-resolution high-S/N optical spectra of the ultracompact low-mass X-ray binaries 4U0614+091 and 4U1626-67, taken with the ESO Very Large Telescope. They are pure emission line spectra and the lines are identified as due to C II-IV and O II-III Line identification is corroborated by first results from modeling the disk spectra with detailed non-LTE radiation transfer calculations. Hydrogen and helium lines are lacking in the observed spectra. Our models confirm the deficiency of H and He in the disks. The lack of neon lines suggests an Ne abundance of less than about 10 percent (by mass), however, this result is uncertain due to possible shortcomings in the model atom. These findings suggest that the donor stars are eroded cores of C/O white dwarfs with no excessive neon overabundance. This would contradict earlier claims of Ne enrichment concluded from X-ray observations of circumbinary material, which was explained by crystallization and fractionation of the white dwarf core.

  4. A coordinated X-ray and Optical Campaign of the Nearest Massive Eclipsing Binary, $\\delta$ Orionis Aa: IV. A multiwavelength, non-LTE spectroscopic analysis

    CERN Document Server

    Shenar, T; Hamann, W -R; Corcoran, M F; Moffat, A F J; Pablo, H; Richardson, N D; Waldron, W L; Huenemoerder, D P; Apellániz, J Maíz; Nichols, J S; Todt, H; Nazé, Y; Hoffman, J L; Pollock, A M T; Negueruela, I

    2015-01-01

    Eclipsing systems of massive stars allow one to explore the properties of their components in great detail. We perform a multi-wavelength, non-LTE analysis of the three components of the massive multiple system $\\delta$ Ori A, focusing on the fundamental stellar properties, stellar winds, and X-ray characteristics of the system. The primary's distance-independent parameters turn out to be characteristic for its spectral type (O9.5 II), but usage of the ${\\rm \\it Hipparcos}$ parallax yields surprisingly low values for the mass, radius, and luminosity. Consistent values follow only if $\\delta$ Ori lies at about twice the ${\\rm \\it Hipparcos}$ distance, in the vicinity of the $\\sigma$-Orionis cluster. The primary and tertiary dominate the spectrum and leave the secondary only marginally detectable. We estimate the V-band magnitude difference between primary and secondary to be $\\Delta V \\approx 2.\\!\\!^{\\rm m}8$. The inferred parameters suggest the secondary is an early B-type dwarf ($\\approx$ B1 V), while the te...

  5. Non-LTE Inversion of Spectropolarimetric and Spectroscopic Observations of a Small Active-region Filament Observed at the VTT

    Science.gov (United States)

    Schwartz, P.; Balthasar, H.; Kuckein, C.; Koza, J.; Gömöry, P.; Rybák, J.; Kučera, A.; Heinzel, P.

    2016-04-01

    An active region mini-filament was observed by VTT simultaneously in the HeI 10 830 Å triplet by the TIP 1 spectropolarimeter, in Hα by the TESOS Fabry-Pérot interferometer, and in Ca II 8542 Å by the VTT spectrograph. The spectropolarimetric data were inverted using the HAZEL code and Hα profiles were modelled solving a NLTE radiative transfer in a simple isobaric and isothermal 2D slab irradiated both from bottom and sides. It was found that the mini-filament is composed of horizontal fluxtubes, along which the cool plasma of T˜10 000 K can flow by very large - even supersonic - velocities.

  6. The interplay of plasma treatment and gold coating and ultra-high molecular weight polyethylene: On the cytocompatibility.

    Science.gov (United States)

    Novotná, Zdenka; Rimpelová, Silvie; Juřík, Petr; Veselý, Martin; Kolská, Zdenka; Hubáček, Tomáš; Ruml, Tomáš; Švorčík, Václav

    2017-02-01

    We have investigated the application of Ar plasma for creation of nanostructured ultra high molecular weight polyethylene (PE) surface in order to enhance adhesion of mouse embryonic fibroblasts (L929). The aim of this study was to investigate the effect of the interface between plasma-treated and gold-coated PE on adhesion and spreading of cells. The surface properties of pristine samples and its modified counterparts were studied by different experimental techniques (gravimetry, goniometry and X-ray photoelectron spectroscopy (XPS), electrokinetic analysis), which were used for characterization of treated and sputtered layers, polarity and surface chemical structure, respectively. Further, atomic force microscopy (AFM) was employed to study the surface morphology and roughness. Biological responses of cells seeded on PE samples were evaluated in terms of cell adhesion, spreading, morphology and proliferation. Detailed cell morphology and intercellular connections were followed by scanning electron microscopy (SEM). As it was expected the thickness of a deposited gold film was an increasing function of the sputtering time. Despite the fact that plasma treatment proceeded in inert plasma, oxidized degradation products were formed on the PE surface which would contribute to increased hydrophilicity (wettability) of the plasma treated polymer. The XPS method showed a decrease in carbon concentration with increasing plasma treatment. Cell adhesion measured on the interface between plasma treated and gold coated PE was inversely proportional to the thickness of a gold layer on a sample. Copyright © 2016. Published by Elsevier B.V.

  7. Determination of trace elements in refined gold samples by inductively coupled plasma atomic emission spectrometry

    Directory of Open Access Journals (Sweden)

    Steharnik Mirjana

    2013-01-01

    Full Text Available This paper presents a method for determination the trace contents of silver, copper, iron, palladium, zinc and platinum in refined gold samples. Simultaneous inductively coupled plasma atomic emission spectrometer with radial torch position and cross flow nebulizer was used for determination. In order to compare the different calibration strategies, two sets of calibration standards were prepared. The first set was based on matrix matched calibration standards and the second was prepared without the addition of matrix material. Detection limits for matrix matching calibrations were higher for some elements than those without matrix matching. In addition, the internal standardization method was applied and experiments indicated that indium was the best option as internal standard. The obtained results for gold sample by matrix matching and matrix free calibrations were compared with the obtained results by standard addition method. The accuracy of the methods was tested performing recovery test. Recoveries for spiked sample were in the range of 90-115 %. The accuracy of the methods was also tested by analysis of certified reference material of high pure goldAuGHP1. The best results were achieved by matrix free calibration and standard addition method using indium as internal standard at wavelength of 230 nm. [Projekat Ministarstva nauke Republike Srbije, br. 34024: Development of Technologies for Recycling of Precious, Rare and Associated Metals from Solid Waste in Serbia to High Purity Products

  8. NLTE4 Plasma Population Kinetics Database

    Science.gov (United States)

    SRD 159 NLTE4 Plasma Population Kinetics Database (Web database for purchase)   This database contains benchmark results for simulation of plasma population kinetics and emission spectra. The data were contributed by the participants of the 4th Non-LTE Code Comparison Workshop who have unrestricted access to the database. The only limitation for other users is in hidden labeling of the output results. Guest users can proceed to the database entry page without entering userid and password.

  9. A Coordinated X-Ray and Optical Campaign of the Nearest Massive Eclipsing Binary, δ Orionis Aa. IV. A Multiwavelength, Non-LTE Spectroscopic Analysis

    Science.gov (United States)

    Shenar, T.; Oskinova, L.; Hamann, W.-R.; Corcoran, M. F.; Moffat, A. F. J.; Pablo, H.; Richardson, N. D.; Waldron, W. L.; Huenemoerder, D. P.; Maíz Apellániz, J.; Nichols, J. S.; Todt, H.; Nazé, Y.; Hoffman, J. L.; Pollock, A. M. T.; Negueruela, I.

    2015-08-01

    Eclipsing systems of massive stars allow one to explore the properties of their components in great detail. We perform a multi-wavelength, non-LTE analysis of the three components of the massive multiple system δ Ori A, focusing on the fundamental stellar properties, stellar winds, and X-ray characteristics of the system. The primary’s distance-independent parameters turn out to be characteristic for its spectral type (O9.5 II), but usage of the Hipparcos parallax yields surprisingly low values for the mass, radius, and luminosity. Consistent values follow only if δ Ori lies at about twice the Hipparcos distance, in the vicinity of the σ-Orionis cluster. The primary and tertiary dominate the spectrum and leave the secondary only marginally detectable. We estimate the V-band magnitude difference between primary and secondary to be {{Δ }}V≈ 2\\buildrel{{m}}\\over{.} 8. The inferred parameters suggest that the secondary is an early B-type dwarf (≈B1 V), while the tertiary is an early B-type subgiant (≈B0 IV). We find evidence for rapid turbulent velocities (˜200 km s-1) and wind inhomogeneities, partially optically thick, in the primary’s wind. The bulk of the X-ray emission likely emerges from the primary’s stellar wind ({log}{L}{{X}}/{L}{Bol}≈ -6.85), initiating close to the stellar surface at {R}0˜ 1.1 {R}*. Accounting for clumping, the mass-loss rate of the primary is found to be {log}\\dot{M}≈ -6.4 ({M}⊙ {{yr}}-1), which agrees with hydrodynamic predictions, and provides a consistent picture along the X-ray, UV, optical, and radio spectral domains.

  10. Realization of thermally durable close-packed 2D gold nanoparticle arrays using self-assembly and plasma etching.

    Science.gov (United States)

    Sivaraman, Sankar K; Santhanam, Venugopal

    2012-06-29

    Realization of thermally and chemically durable, ordered gold nanostructures using bottom-up self-assembly techniques are essential for applications in a wide range of areas including catalysis, energy generation, and sensing. Herein, we describe a modular process for realizing uniform arrays of gold nanoparticles, with interparticle spacings of 2 nm and above, by using RF plasma etching to remove ligands from self-assembled arrays of ligand-coated gold nanoparticles. Both nanoscale imaging and macroscale spectroscopic characterization techniques were used to determine the optimal conditions for plasma etching, namely RF power, operating pressure, duration of treatment, and type of gas. We then studied the effect of nanoparticle size, interparticle spacing, and type of substrate on the thermal durability of plasma-treated and untreated nanoparticle arrays. Plasma-treated arrays showed enhanced chemical and thermal durability, on account of the removal of ligands. To illustrate the application potential of the developed process, robust SERS (surface-enhanced Raman scattering) substrates were formed using plasma-treated arrays of silver-coated gold nanoparticles that had a silicon wafer or photopaper as the underlying support. The measured value of the average SERS enhancement factor (2 × 10(5)) was quantitatively reproducible on both silicon and paper substrates. The silicon substrates gave quantitatively reproducible results even after thermal annealing. The paper-based SERS substrate was also used to swab and detect probe molecules deposited on a solid surface.

  11. Realization of thermally durable close-packed 2D gold nanoparticle arrays using self-assembly and plasma etching

    Science.gov (United States)

    Sivaraman, Sankar K.; Santhanam, Venugopal

    2012-06-01

    Realization of thermally and chemically durable, ordered gold nanostructures using bottom-up self-assembly techniques are essential for applications in a wide range of areas including catalysis, energy generation, and sensing. Herein, we describe a modular process for realizing uniform arrays of gold nanoparticles, with interparticle spacings of 2 nm and above, by using RF plasma etching to remove ligands from self-assembled arrays of ligand-coated gold nanoparticles. Both nanoscale imaging and macroscale spectroscopic characterization techniques were used to determine the optimal conditions for plasma etching, namely RF power, operating pressure, duration of treatment, and type of gas. We then studied the effect of nanoparticle size, interparticle spacing, and type of substrate on the thermal durability of plasma-treated and untreated nanoparticle arrays. Plasma-treated arrays showed enhanced chemical and thermal durability, on account of the removal of ligands. To illustrate the application potential of the developed process, robust SERS (surface-enhanced Raman scattering) substrates were formed using plasma-treated arrays of silver-coated gold nanoparticles that had a silicon wafer or photopaper as the underlying support. The measured value of the average SERS enhancement factor (2 × 105) was quantitatively reproducible on both silicon and paper substrates. The silicon substrates gave quantitatively reproducible results even after thermal annealing. The paper-based SERS substrate was also used to swab and detect probe molecules deposited on a solid surface.

  12. Application of imaging spectroscopic reflectometry for characterization of gold reduction from organometallic compound by means of plasma jet technology

    Science.gov (United States)

    Vodák, Jiří; Nečas, David; Pavliňák, David; Macak, Jan M.; Řičica, Tomáš; Jambor, Roman; Ohlídal, Miloslav

    2017-02-01

    This work presents a new application of imaging spectroscopic reflectometry to determine a distribution of metallic gold in a layer of an organogold precursor which was treated by a plasma jet. Gold layers were prepared by spin coating from a solution of the precursor containing a small amount of polyvinylpyrrolidone on a microscopy glass, then they were vacuum dried. A difference between reflectivity of metallic gold and the precursor was utilized by imaging spectroscopic reflectometry to create a map of metallic gold distribution using a newly developed model of the studied sample. The basic principle of the imaging spectroscopic reflectometry is also shown together with the data acquisition principles. XPS measurements and microscopy observations were made to complete the imaging spectroscopic reflectometry results. It is proved that the imaging spectroscopic reflectometry represents a new method for quantitative evaluation of local reduction of metallic components from metaloorganic compounds.

  13. Interaction of gold and silver nanoparticles with human plasma: Analysis of protein corona reveals specific binding patterns.

    Science.gov (United States)

    Lai, Wenjia; Wang, Qingsong; Li, Lumeng; Hu, Zhiyuan; Chen, Jiankui; Fang, Qiaojun

    2017-04-01

    Determining how nanomaterials interact with plasma will assist in understanding their effects on the biological system. This work presents a systematic study of the protein corona formed from human plasma on 20nm silver and gold nanoparticles with three different surface modifications, including positive and negative surface charges. The results show that all nanoparticles, even those with positive surface modifications, acquire negative charges after interacting with plasma. Approximately 300 proteins are identified on the coronas, while 99 are commonly found on each nanomaterial. The 20 most abundant proteins account for over 80% of the total proteins abundance. Remarkably, the surface charge and core of the nanoparticles, as well as the isoelectric point of the plasma proteins, are found to play significant roles in determining the nanoparticle coronas. Albumin and globulins are present at levels of less than 2% on these nanoparticle coronas. Fibrinogen, which presents in the plasma but not in the serum, preferably binds to negatively charged gold nanoparticles. These observations demonstrate the specific plasma protein binding pattern of silver and gold nanoparticles, as well as the importance of the surface charge and core in determining the protein corona compositions. The potential downstream biological impacts of the corona proteins were also investigated.

  14. Plasmonic gold helices for the visible range fabricated by oxygen plasma purification of electron beam induced deposits

    Science.gov (United States)

    Haverkamp, Caspar; Höflich, Katja; Jäckle, Sara; Manzoni, Anna; Christiansen, Silke

    2017-02-01

    Electron beam induced deposition (EBID) currently provides the only direct writing technique for truly three-dimensional nanostructures with geometrical features below 50 nm. Unfortunately, the depositions from metal-organic precursors suffer from a substantial carbon content. This hinders many applications, especially in plasmonics where the metallic nature of the geometric surfaces is mandatory. To overcome this problem a post-deposition treatment with oxygen plasma at room temperature was investigated for the purification of gold containing EBID structures. Upon plasma treatment, the structures experience a shrinkage in diameter of about 18 nm but entirely keep their initial shape. The proposed purification step results in a core-shell structure with the core consisting of mainly unaffected EBID material and a gold shell of about 20 nm in thickness. These purified structures are plasmonically active in the visible wavelength range as shown by dark field optical microscopy on helical nanostructures. Most notably, electromagnetic modeling of the corresponding scattering spectra verified that the thickness and quality of the resulting gold shell ensures an optical response equal to that of pure gold nanostructures.

  15. Influence of inelastic collisions with hydrogen atoms on the non-LTE modelling of Ca i and Ca ii lines in late-type stars

    Science.gov (United States)

    Mashonkina, L.; Sitnova, T.; Belyaev, A. K.

    2017-09-01

    We performed the non-local thermodynamic equilibrium (non-LTE, NLTE) calculations for Ca i-ii with the updated model atom that includes new quantum-mechanical rate coefficients for Ca i + H i collisions from two recent studies and investigated the accuracy of calcium abundance determinations using the Sun, Procyon, and five metal-poor (MP, -2.6 ≤ [Fe/H] ≤-1.3) stars with well-determined stellar parameters. Including H i collisions substantially reduces over-ionisation of Ca i in the line formation layers compared with the case of pure electronic collisions and thus the NLTE effects on abundances derived from Ca i lines. We show that both collisional recipes lead to very similar NLTE results. As for Ca ii, the classical Drawinian rates scaled by SH = 0.1 are still applied. When using the subordinate lines of Ca i and the high-excitation lines of Ca ii, NLTE provides the smaller line-to-line scatter compared with the LTE case for each star. For Procyon, NLTE removes a steep trend with line strength among strong Ca i lines seen in LTE and leads to consistent [Ca/H] abundances from the two ionisation stages. In the MP stars, the NLTE abundance from Ca ii 8498 Å agrees well with the abundance from the Ca i subordinate lines, in contrast to LTE, where the abundance difference grows towards lower metallicity and reaches 0.46 dex in BD -13°3442 ([Fe/H] = -2.62). NLTE largely removes abundance discrepancies between the high-excitation lines of Ca ii and Ca ii 8498 Å obtained for our four [Fe/H] situation is improved when the calcium abundance decreases and the Ca i 4226 Å line formation depths are shifted into deep atmospheric layers that are dominated by over-ionisation of Ca i. However, the departures from LTE are still underestimated for Ca i 4226 Å at [Ca/H] ≃ -4.4 (HE 0557-4840). Consistent NLTE abundances from the Ca i resonance line and the Ca ii lines are found for HE 0107-5240 and HE 1327-2326 with [Ca/H] ≤-5. Thus, the Ca i/Ca ii ionisation

  16. Plasmonic Gold Helices for the visible range fabricated by oxygen plasma purification of electron beam induced deposits

    CERN Document Server

    Haverkamp, Caspar; Jäckle, Sara; Manzoni, Anna; Christiansen, Silke

    2016-01-01

    Electron beam induced deposition (EBID) currently provides the only direct writing technique for truly three-dimensional nanostructures with geometrical features below 50 nm. Unfortunately, the depositions from metal-organic precursors suffer from a substantial carbon content. This hinders many applications, especially in plasmonics where the metallic nature of the geometric surfaces is mandatory. To overcome this problem a post-deposition treatment with oxygen plasma at room temperature was investigated for the purification of gold containing EBID structures. Upon plasma treatment, the structures experience a shrinkage in diameter of about 18 nm but entirely keep their initial shape. The proposed purification step results in a core-shell structure with the core consisting of mainly unaffected EBID material and a gold shell of about 20 nm in thickness. These purified structures are plasmonically active in the visible wavelength range as shown by dark field optical microscopy on helical nanostructures. Most no...

  17. Imaging gold nanoparticles in mouse liver by laser ablation inductively coupled plasma mass spectrometry.

    Science.gov (United States)

    Li, Qing; Wang, Zheng; Mo, Jiamei; Zhang, Guoxia; Chen, Yirui; Huang, Chuchu

    2017-06-07

    Imaging the size distribution of metal nanoparticles (NPs) in a tissue has important implications in terms of evaluating NP toxicity. Microscopy techniques used to image tissue NPs are limited by complicated sample preparation or poor resolution. In this study, we developed a laser ablation (LA) system coupled to single-particle inductively coupled plasma mass spectrometry (SP-ICP-MS) for quantitative imaging of gold (G)NPs in tissue samples. In this system, GNPs were ablated but did not disintegrate and integrate under optimised operation conditions, which were verified by characterising LA particles by scanning electron microscopy. The feasibility of imaging size distributions in tissue was validated using reference GNPs 60 and 80 nm in size on matrix-matched kidney. A transport efficiency of 6.07% was obtained by LA-SP-ICP-MS under optimal conditions. We used this system to image 80-nm GNPs in mouse liver and the size distribution thus obtained was in accordance with that determined by nebuliser SP-ICP-MS. The images revealed that 80-nm GNPs mainly accumulate in the liver and did not obviously aggregate. Our results demonstrate that LA-SP-ICP-MS is an effective tool for evaluating the size distribution of metal NPs in tissue.

  18. Separation of gold, palladium and platinum in chromite by anion exchange chromatography for inductively coupled plasma atomic emission spectrometric analysis

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Kwang Soon; Lee, Chang Heon; Park, Yeong Jae; Joe, Kih Soo; Kim, Won Ho [KAERI, Taejon (Korea, Republic of)

    2001-08-01

    A study has been carried out on the separation of gold, iridium, palladium, rhodium, ruthenium and platinum in chromite samples and their quantitative determination using inductively coupled plasma atomic emission spectrometry (ICP-AES). The dissolution condition of the minerals by fusion with sodium peroxide was optimized and chromatographic elution behavior of the rare metals was investigated by anion exchange chromatography. Spectral interference of chromium, a matrix of the minerals, was investigated on determination of gold. Chromium interfered on determination of gold at the concentration of 500 mg/L and higher. Gold plus trace amounts of iridium, palladium, rhodium and ruthenium, which must be preconcentrated before ICP-AES was separated by anion exchange chromatography after reducing Cr(VI) to Cr(III) by H{sub 2}O{sub 2}. AuCl{sup -}{sub 4} retained on the resin column was selectively eluted with acetone- HNO{sub 3}-H{sub 2}O as an eluent. In addition, iridium, palladium, rhodium and ruthenium remaining on the resin column were eluted as a group with concentrated HCl. However, platinum was eluted with concentrated HNO{sub 3}. The recovery yield of gold with acetone-HNO{sub 3}-H{sub 2}O was 100.7 {+-} 2.0 % , and the yields of palladium and platinum with concentrated HCl and HNO{sub 3} were 96.1 {+-} 1.8% and 96.6 {+-} 1.3%, respectively. The contents of gold and platinum in a Mongolian chromite sample were 32.6 {+-} 2.2 {mu}g/g and 1.6 {+-} 0.14 {mu}g/g, respectively. Palladium was not detected.

  19. X-ray Spectral Measurements and Collisional Radiative Modeling of Hot, Gold Plasmas at the Omega Laser

    Energy Technology Data Exchange (ETDEWEB)

    May, M J; Schneider, M B; Hansen, S B; Chung, H; Hinkel, D E; Baldis, H A; Constantin, C

    2008-07-02

    M-Band and L-Band Gold spectra between 3 to 5 keV and 8 to 13 keV, respectively, have been recorded by a photometrically calibrated crystal spectrometer. The spectra were emitted from the plasma in the laser deposition region of a 'hot hohlraum'. This is a reduced-scale hohlraum heated with {approx} 9 kJ of 351 nm light in a 1 ns square pulse at the OMEGA laser. The space- and time-integrated spectra included L-Band line emission from Co-like to Ne-like gold. The three L-Band line features were identified to be the 3s {yields} 2p, 3d{sub 5/2} {yields} 2p{sub 3/2} and 3d{sub 3/2} {yields} 2p{sub 1/2} transitions at {approx}9 keV, {approx}10 keV and {approx}13 keV, respectively. M-Band 5f {yields} 3d, 4d {yields} 3p, and 4p {yields} 3s transition features from Fe-like to P-like gold were also recorded between 3 to 5 keV. Modeling from the radiation-hydrodynamics code LASNEX, the collisional-radiative codes FLYCHK and SCRAM, and the atomic structure code FAC were used to model the plasma and generate simulated spectra for comparison with the recorded spectra. Through these comparisons, we have determined the average electron temperature of the emitting plasma to be between 6.0 and 6.5 keV. The electron temperatures predicted by LASNEX appear to be too large by a factor of about 1.5.

  20. Thermal/plasma-driven reversible wettability switching of a bare gold film on a poly(dimethylsiloxane) surface by electroless plating.

    Science.gov (United States)

    Wu, Jian; Bai, Hai-Jing; Zhang, Xian-Bo; Xu, Jing-Juan; Chen, Hong-Yuan

    2010-01-19

    We report an approach for fabricating a tunable wettability surface by electroless gold plating on poly(dimethylsiloxane) (PDMS). A two-layer structured gold film with a tight layer and a loose layer can be obtained on the surface of a PDMS chip when the PDMS chip is immersed in a gold plating solution at 30 degrees C for 4 h. Its wettability can be rapidly switched between superhydrophilicity and superhydrophobicity by plasma and heat treatments without any self-assembled monolayer, and the superhydrophobicity can be even changed from the gecko-foot-hair-like character to the lotus-leaf-like character. Benefiting from the various wettabilities of the prepared gold/PDMS composites, protein patterning is successfully achieved on a patterned superhydrophobic/superhydrophilic gold/PDMS composite; a superhydrophobic needle for transferring supersmall water droplets (1 microL) to a superhydrophobic surface is successfully fabricated.

  1. Attenuation of stress-elicited brain catecholamines, serotonin and plasma corticosterone levels by calcined gold preparations used in Indian system of medicine.

    Science.gov (United States)

    Shah, Zahoor Ahmad; Gilani, Rabia Afzal; Sharma, Pragya; Vohora, Shashi Bharat

    2005-06-01

    Problems associated with mental health have increased tremendously in modern times. The search for effective and safe alternatives should, therefore, be pursued vigorously. Forced immobilization is one of the best explored models of stress in rats and the role of corticosterone, serotonin (5-HT) and catecholamines, i.e. norepinephrine, epinephrine, dopamine is well documented. We investigated the therapeutic potential of two gold preparations (Ayurvedic Swarna Bhasma and Unani Kushta Tila Kalan) in restraint induced stress at different time points of 1 hr, 2 hr and 4 hr. We pretreated rats with two gold preparations, Ayurvedic Swarna Bhasma and Unani Kushta Tila Kalan (25 mg/kg, orally for 10 days) prior to restraint stress. Brain catecholamine, serotonin and plasma corticosterone levels were determined following 1, 2 and 4 hr restraint stress, using HPLC and also plasma corticosterone using luminescence spectrophotometry. Gold preparations restored restraint stress-induced elevation in levels of brain catecholamines (norepinephrine, epinephrine and dopmine), 5-HT and plasma corticosterone to near normal levels. Gold, widely used in modern medicine for the treatment of rheumatoid arthritis, is highly valued for various medicinal uses in Indian systems of medicine. Traditional gold preparations are attributed with tonic/rejuvenating and antioxidant properties. Our earlier studies revealed interesting analgesic, immunostimulant, adaptogenic and glycogen sparing properties in these preparations, but their effects in stress and depression have not been investigated yet. Significant restoration of altered values to near normal levels suggest potentials for gold preparations in stress and depression.

  2. Gold nano-particle formation from crystalline AuCN: Comparison of thermal, plasma- and ion-beam activated decomposition

    Science.gov (United States)

    Beck, Mihály T.; Bertóti, Imre; Mohai, Miklós; Németh, Péter; Jakab, Emma; Szabó, László; Szépvölgyi, János

    2017-02-01

    In this work, in addition to the conventional thermal process, two non-conventional ways, the plasma and ion beam activations are described for preparing gold nanoparticles from microcrystalline AuCN precursor. The phase formation at plasma and ion beam treatments was compared with that at thermal treatments and the products and transformations were characterized by thermogravimetry-mass-spectrometry (TG-MS), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). TG-MS measurements in Ar atmosphere revealed that AuCN decomposition starts at 400 °C and completes at ≈700 °C with evolution of gaseous (CN)2. XPS and TEM show that in heat treatment at 450 °C for 1 h in Ar, loss of nitrogen and carbon occurs and small, 5-30 nm gold particles forms. Heating at 450 °C for 10 h in sealed ampoule, much larger, 60-200 nm size and well faceted Au particles develop together with a fibrous (CN)n polymer phase, and the Au crystallites are covered by a 3-5 nm thick polymer shell. Low pressure Ar plasma treatment at 300 eV energy results in 4-20 nm size Au particles and removes most of the nitrogen and part of carbon. During Ar+ ion bombardment with 2500 eV energy, 5-30 nm size Au crystallites form already in 10 min, with preferential loss of nitrogen and with increased amount of carbon residue. The results suggest that plasma and ion beam activation, acting similarly to thermal treatment, may be used to prepare Au nanoparticles from AuCN on selected surface areas either by depositing AuCN precursors on selected regions or by focusing the applied ionized radiation. Thus they may offer alternative ways for preparing tailor-made catalysts, electronic devices and sensors for different applications.

  3. Quantitative Characterization of Gold Nanoparticles by Coupling Thin Layer Chromatography with Laser Ablation Inductively Coupled Plasma Mass Spectrometry.

    Science.gov (United States)

    Yan, Neng; Zhu, Zhenli; Jin, Lanlan; Guo, Wei; Gan, Yiqun; Hu, Shenghong

    2015-06-16

    Metal nanoparticles (NPs) determination has recently attracted considerable attention because of the continuing boom of nanotechnology. In this study, a novel method for separation and quantitative characterization of NPs in aqueous suspension was established by coupling thin layer chromatography (TLC) with laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). Gold nanoparticles (AuNPs) of various sizes were used as the model system. It was demonstrated that TLC not only allowed separation of gold nanoparticles from ionic gold species by using acetyl acetone/butyl alcohol/triethylamine (6:3:1, v/v) as the mobile phase, but it also achieved the separation of differently sized gold nanoparticles (13, 34, and 47 nm) by using phosphate buffer (0.2 M, pH = 6.8), Triton X-114 (0.4%, w/v), and EDTA (10 mM) as the mobile phase. Various experimental parameters that affecting TLC separation of AuNPs, such as the pH of the phosphate buffer, the coating of AuNPs, the concentrations of EDTA and Triton X-114, were investigated and optimized. It was found that separations of AuNPs by TLC displayed size dependent retention behavior with good reproducibility, and the retardation factors (R(f) value) increased linearly with decreasing nanoparticle size. The analytical performance of the present method was evaluated under optimized conditions. The limits of detection were in the tens of pg range, and repeatability (RSD, n = 7) was 6.3%, 5.9%, and 8.3% for 30 ng of 13 nm AuNPs, 34 nm AuNPs, and 47 nm AuNPs, respectively. The developed TLC-LA-ICP-MS method has also been applied to the analysis of spiked AuNPs in lake water, river water, and tap water samples.

  4. Hybrid-PIC modeling of laser-plasma interactions and hot electron generation in gold hohlraum walls

    Science.gov (United States)

    Thoma, C.; Welch, D. R.; Clark, R. E.; Rose, D. V.; Golovkin, I. E.

    2017-06-01

    The walls of the hohlraum used in experiments at the national ignition facility are heated by laser beams with intensities ˜ 10 15 W/cm2, a wavelength of ˜ 1 / 3 μm, and pulse lengths on the order of a ns, with collisional absorption believed to be the primary heating mechanism. X-rays generated by the hot ablated plasma at the gold walls are then used to implode a target in the hohlraum interior. In addition to the collisional absorption of laser energy at the walls, non-linear laser-plasma interactions (LPI), such as stimulated Raman scattering and two plasmon decay, are believed to generate a population of supra-thermal electrons which, if present in the hohlraum, can have a deleterious effect on target implosion. We describe results of hohlraum modeling using a hybrid particle-in-cell code. To enable this work, new particle-based algorithms for a multiple-ion magneto-hydrodynamic (MHD) treatment, and a particle-based ray-tracing model were developed. The use of such hybrid methods relaxes the requirement to resolve the laser wavelength, and allows for relatively large-scale hohlraum simulations with a reasonable number of cells. But the non-linear effects which are believed to be the cause of hot electron generation can only be captured by fully kinetic simulations with good resolution of the laser wavelength. For this reason, we employ a two-tiered approach to hohlraum modeling. Large-scale simulations of the collisional absorption process can be conducted using the fast quasi-neutral MHD algorithm with fluid particle species. From these simulations, we can observe the time evolution of the hohlraum walls and characterize the density and temperature profiles. From these results, we can transition to smaller-scale highly resolved simulations using traditional kinetic particle-in-cell methods, from which we can fully model all of the non-linear laser-plasma interactions, as well as assess the details of the electron distribution function. We find that vacuum

  5. Modification of amorphous poly(ethylene terephthalate) surface by UV light and plasma for fabrication of an electrophoresis chip with an integrated gold microelectrode.

    Science.gov (United States)

    Hao, Zhenxia; Chen, Hengwu; Zhu, Xiaoying; Li, Jingmin; Liu, Chong

    2008-10-31

    Amorphous poly(ethylene terephthalate) (PET), which possess a low softening temperature (T(s)=75 degrees C), was exploited to fabricate the electrophoresis chip with an integrated gold electrode for amperometric detection, with emphases being focused on the PET surface modification via UV light and air plasma. Both UV irradiation and plasma treatment were found to be able to improve the surface wettability, enhance the supported electroosmotic flow (EOF), and increase thermal bonding strength of PET sheets, with the latter being more efficient and less time-consuming than the former in the surface modification. Upon treated with plasma for 2 min, the PET sheets could be thermally bonded at 65 degrees C. T-peer test showed that the bonding strength increased from 10 g/cm for native PET sheets to 1250 g/cm for the plasma treated sheets when chips were bonded at the softening point, Attenuated-total-internal-reflection spectrum showed that, after being exposed to the UV light, carboxylic groups site-selectively formed in the UV-exposed region on PET surface. These UV-induced carboxylic groups were further utilized as the scaffold for preparation of micro-gold electrode via electroless gold plating. By using this established UV-directed electroless plating and the plasma-assisted thermal bonding techniques, the full PET electrophoresis chip with an integrated micro-gold electrode could be fabricated in common chemistry laboratory without the need of clean rooms. The fabricated PET chips were demonstrated for separation and detection of model analytes of dopamine (DA) and catechol (CA). Satisfactory resolution of the two analytes was achieved within 40s, and detection limits of 0.87 microM and 1.28 microM for DA and CA were obtained, respectively.

  6. X-ray calculations for a NLTE Ar plasma

    Institute of Scientific and Technical Information of China (English)

    WU Ze-qing; PANG Jin-qiao; HAN Guo-xing

    2004-01-01

    A model is developed to calculate emission spectrum of non-local thermodynamic equilibrium(NLTE) plasmas. The Collisional-Radiative model is adopted for non-LTE population calculations. Configuration-averaged rate coefficients that needed in the rate equations are obtained based on the first order perturbation theory. The Hatree-Fock-Slater self-consistent-field method is used to calculate electron wave functions. The present model is applied to the calculation of emissivity from a Ar plasma. The features of the spectra are in good agreement with those calculated by other theoretical models, but the data of the integrated emissivity differ by a factor 2~8.

  7. Effect of gold nanorods in an MgO protective layer of AC plasma display panels.

    Science.gov (United States)

    Cho, Seok Ho; Lee, Seong Min; Kim, Woo Hyun; Choi, Kyung Cheol

    2015-04-15

    We propose a modified MgO protective layer for alternating current plasma display panels. The modified MgO protective layer of the panel tested here has a structure that incorporates silica-coated Au nanorods (NRs), leading to localized surface plasmon resonance (LSPR) in the near-infrared (IR) region. The silica-coated Au NRs were synthesized by a simple chemical method and inserted into an MgO protective layer using an air-spray method. The operating voltage of the proposed structure was decreased by 10 V. The luminance and luminous efficacy of the test panel part with the silica-coated Au NRs both increased by about 15%. According to the measured results of the IR response time, the sustain discharge time lag was reduced. In addition, by inserting the silica-coated Au NRs into the MgO protective layer, a decrease of the IR emission proceeding from the plasma discharge was acquired. Finally, we investigated the LSPR effect of the silica-coated Au NRs in a simulation with a finite-difference time domain method.

  8. Selective electroless nickel plating on oxygen-plasma-activated gold seed-layers for the fabrication of low contact resistance vias and microstructures

    OpenAIRE

    Fischer A.C.; Lapisa M.; Roxhed N.; Stemme G; Niklaus F.

    2010-01-01

    This paper presents a novel technique to selectively deposit nickel by electroless plating on gold seed layers using an oxygen-plasma-activation step. No prior wet surface pre- treatments or metal oxide etches are required. This enables the manufacturing of low-resistance vias for heterogeneous three-dimensional (3D) integration of MEMS but it is also a suitable technique for the fabrication of arbitrary shaped nickel-microstructures using chemically stable and cost-effective electroless nick...

  9. Diameter control of gold nanoparticles synthesized in gas phase using atmospheric-pressure H2/Ar plasma jet and gold wire as the nanoparticle source: Control by varying the H2/Ar mixture ratio

    Science.gov (United States)

    Shimizu, Yoshiki

    2017-01-01

    This report describes diameter control of gold nanoparticles (AuNPs) during synthesis using an atmospheric-pressure H2/Ar plasma jet drive with pulse-modulated ultrahigh frequency, employing Au wire as the NP source material. During this process, where most of the AuNPs are regarded as formed through condensation from Au vapor derived by the Au wire etching, the mean diameter varied in the approximate range of 2-12 nm with H2 volume ratios up to 3.9%. In plasma diagnostics, results showed that the H2 volume ratio influences the plasma discharge behaviour, which affects the heat flux density flowed into the Au wire, and the atomic hydrogen concentration in the plasma. Both seemed to influence the etching rate of the Au wire per unit area, which is directly related to the concentration of Au vapor in the plasma. The concentration is one factor affecting the particle size evolution because of the collisions among vapor species in reaction field. Therefore, the AuNP size variation with the H2 volume ratio was discussed from the perspective of the etching rate of the Au wire at each H2 volume ratio.

  10. Diameter control of gold nanoparticles synthesized in gas phase using atmospheric-pressure H2/Ar plasma jet and gold wire as the nanoparticle source: Control by varying the H2/Ar mixture ratio

    Directory of Open Access Journals (Sweden)

    Yoshiki Shimizu

    2017-01-01

    Full Text Available This report describes diameter control of gold nanoparticles (AuNPs during synthesis using an atmospheric-pressure H2/Ar plasma jet drive with pulse-modulated ultrahigh frequency, employing Au wire as the NP source material. During this process, where most of the AuNPs are regarded as formed through condensation from Au vapor derived by the Au wire etching, the mean diameter varied in the approximate range of 2–12 nm with H2 volume ratios up to 3.9%. In plasma diagnostics, results showed that the H2 volume ratio influences the plasma discharge behaviour, which affects the heat flux density flowed into the Au wire, and the atomic hydrogen concentration in the plasma. Both seemed to influence the etching rate of the Au wire per unit area, which is directly related to the concentration of Au vapor in the plasma. The concentration is one factor affecting the particle size evolution because of the collisions among vapor species in reaction field. Therefore, the AuNP size variation with the H2 volume ratio was discussed from the perspective of the etching rate of the Au wire at each H2 volume ratio.

  11. The impact of low-Z impurities on x-ray conversion efficiency from laser-produced plasmas of low-density gold foam targets

    Science.gov (United States)

    Dong, Yunsong; Shang, Wanli; Yang, Jiamin; Zhang, Lu; Zhang, Wenhai; Li, Zhichao; Guo, Liang; Zhan, Xiayu; Du, Huabing; Deng, Bo; Pu, Yikang

    2013-12-01

    It is an important approach to improve the x-ray conversion efficiency of laser-ablated high-Z plasmas by using low initial density materials for various applications. However, unavoidable low-Z impurities in the manufacture process of low-density high-Z foam targets will depress this effect. A general easy-to-use analytical model based on simulations was developed to evaluate the quantitative impact of impurities within the gold foam target on laser to x-ray conversion efficiency. In addition, the x-ray conversion efficiencies of 1 g/cm3 gold foams with two different initial contents of impurities were experimentally investigated. Good agreements have been achieved between the model results and experiments.

  12. Methodology for monitoring gold nanoparticles and dissolved gold species in culture medium and cells used for nanotoxicity tests by liquid chromatography hyphenated to inductively coupled plasma-mass spectrometry.

    Science.gov (United States)

    López-Sanz, Sara; Fariñas, Nuria Rodríguez; Vargas, Rosario Serrano; Martín-Doimeadios, Rosa Del Carmen Rodríguez; Ríos, Ángel

    2017-03-01

    An analytical methodology based on coupling reversed-phase liquid chromatography (HPLC) to an inductively coupled plasma mass spectrometry (ICP-MS) has been developed for the characterization and identification of gold nanoparticles (AuNPs) and gold dissolved species (Au(3+)) in culture medium (Dulbecco's Modified Eagle Medium, DMEM) and HeLa cells (a human cervical adenocarcinoma cell line) used in nanotoxicity tests. The influence of the culture medium was also studied and the method applied for nanotoxicity tests. It was also observed that AuNPs can undergo an oxidation process in the supernatants and only a small amount of AuNPs and dissolved Au(3+) was associated with cells. To evaluate the biological impact of AuNPs, a classical viability assay onto HeLa cells was performed using cellular media DMEM in the presence of increasing dosage of 10nm AuNPs. The results showed that 10nm AuNPs exhibit a slight toxic effect.

  13. Gold Rush!

    Science.gov (United States)

    Brahier, Daniel J.

    1997-01-01

    Describes a mathematical investigation of gold--how it is weighed, stored, used, and valued. For grades 3-4, children estimate the value of treasure chests filled with gold coins and explore the size and weight of gold bars. Children in grades 5-6 explore how gold is mined and used, and how the value of gold changes over time. (PVD)

  14. Opacity calculations for Non-Local-Thermodynamic-Equilibrium plasmas

    Institute of Scientific and Technical Information of China (English)

    PANG Jin-qiao; WU Ze-qing; YAN Jun; HAN Guo-xing

    2004-01-01

    In this paper, we presented a method to calculate the spectral-resolved opacity for Non-Local-Thermodynamic-Equilibrium (non-LTE) plasmas. By solving the rate equations, we get the population. In the rate equations, configuration-averaged rate coefficients are used and the cross sections are calculated based on the first-perturbation theory. Using the detailed configuration accounting with the term structures treated by the unresolved transition array model, we calculated the spectral-resolved opacity of Al plasmas. The results are compared with those of other theoretical models. From the comparison, we can see that the present results fit well with other models for low-Z plasmas. For high-Z plasmas, we will give detailed discussion in the future.

  15. A simple and efficient electrochemical sensor for folic acid determination in human blood plasma based on gold nanoparticles–modified carbon paste electrode

    Energy Technology Data Exchange (ETDEWEB)

    Arvand, Majid, E-mail: arvand@guilan.ac.ir; Dehsaraei, Mohammad

    2013-08-01

    Folic acid (FA) is a water soluble vitamin that exists in many natural species. The lack of FA causes some deficiencies in human body, so finding a simple and sensitive method for determining the FA is important. A new chemically modified electrode was fabricated for determination of FA in human blood plasma using gold nanoparticles (AuNPs) and carbon paste electrode (CPE). Gold nanoparticles–modified carbon paste electrode (AuNPs/CPE) was characterized by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). The experimental parameters such as pH, scan rate (ν) and amount of modifier were studied by cyclic voltammetry and the optimized values were chosen. The electrochemical parameters such as diffusion coefficient of FA (D{sub FA}), electrode surface area (A) and electron transfer coefficient (α) were calculated. Square wave voltammetry as an accurate technique was used for quantitative calculations. A good linear relation was observed between anodic peak current (i{sub pa}) and FA concentration (C{sub FA}) in the range of 6 × 10{sup −8} to 8 × 10{sup −5} mol L{sup −1}, and the detection limit (LOD) achieved 2.7 × 10{sup −8} mol L{sup −1}, that is comparable with recently studies. This paper demonstrated a novel, simple, selective and rapid sensor for determining the FA in the biological samples. - Highlights: • We examine a AuNPs/CPE for direct electrooxidation behavior and determination of FA. • Characterization of the electrode showed an obvious increase in surface area and porosity after modification. • The modified electrode showed good ability to distinguish the electrochemical response of FA. • The results were attributed to the specific characteristics of AuNPs present in the AuNPs/CPE. • This paper demonstrated a simple and rapid sensor for determination of FA in plasma.

  16. Surface preparation of gold nanostructures on glass by ultraviolet ozone and oxygen plasma for thermal atomic layer deposition of Al{sub 2}O{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Lancaster, Cady A., E-mail: lancaster@chem.utah.edu; Shumaker-Parry, Jennifer S., E-mail: shumaker-parry@chem.utah.edu

    2016-08-01

    Thin film deposition to create robust plasmonic nanomaterials is a growing area of research. Plasmonic nanomaterials have tunable optical properties and can be used as substrates for surface-enhanced spectroscopies. Due to the surface sensitivity and the dependence of the near-field behavior on structural details, degradation from cleaning or spectroscopic interrogation causes plasmonic nanostructures to lose distinctive localized surface plasmon resonances or exhibit diminished optical near-field enhancements over time. To decrease degradation, conformal thin films of alumina are deposited on nanostructured substrates using atomic layer deposition. While film growth on homogenous surfaces has been studied extensively, atomic layer deposition-based film growth on heterogeneous nanostructured surfaces is not well characterized. In this report, we have evaluated the impact of oxygen plasma and ultraviolet ozone pre-treatments on Au nanoparticle substrates for thin film growth by monitoring changes in plasmonic response and nanostructure morphology. We have found that ultraviolet ozone is more effective than oxygen plasma for cleaning gold nanostructured surfaces, which is in contrast to bulk films of the same material. Our results show that oxygen plasma treatment negatively impacts the nanostructure and alumina coating based on both scanning electron microscopy analysis of morphology and changes in the plasmonic response. - Highlights: • Plasmonic response indicates oxygen plasma damages Au structures and Al{sub 2}O{sub 3} films. • Ultraviolet ozone (UVO) re-activates aged Al{sub 2}O{sub 3}-coated Au nanostructures. • UVO treatments do not damage Au or Al{sub 2}O{sub 3}-coated nanostructures.

  17. Identification and comparison of marbofloxacin metabolites from the plasma of ball pythons (Python regius) and blue and gold macaws (Ara ararauna).

    Science.gov (United States)

    Hunter, R P; Koch, D E; Coke, R L; Carpenter, J W; Isaza, R

    2007-06-01

    Marbofloxacin is a veterinary only, synthetic, broad spectrum fluoroquinolone antimicrobial agent. In mammals, approximately 40% of the oral dose of marbofloxacin is excreted unchanged in the urine; the remaining is excreted via the bile as unchanged drug in the feces. The Vd ranges from 1.1 (cattle) to 1.3 (dog, goat, swine) L/kg. Because of extra-label use of marbofloxacin in birds and reptiles, this study was designed to determine the profile of metabolites in plasma and compare the circulating metabolite profile between a reptile and an avian species. Six adult ball pythons (Python regius) and 10 blue and gold macaws (Ara ararauna) were used in this study. The macaws were dosed both i.v. and p.o. with a single 2.5 mg/kg administration where as the pythons received a single 10 mg/kg dose both i.v. and p.o. The metabolite profiles of marbofloxacin in the plasma of these species were determined using a high performance liquid chromatography system with a mass spectrometer for detection (LC/MS/MS). Mass spectra data generated from the snake and bird plasma samples were compared with previously reported LC/MS/MS mass spectral data. Evidence does not suggest differences due to route of administration (i.v. vs. p.o.) in either species. Four chromatographic peaks with resulting daughter spectrum were identified and represent 12 possible metabolite structures. All of the proposed metabolites, except for the N-oxide, appear to be unique to macaws. The potential metabolites identified in macaws appear to be very different than those reported for chickens.

  18. Ultra-trace determination of gold nanoparticles in environmental water by surfactant assisted dispersive liquid liquid microextraction coupled with electrothermal vaporization-inductively coupled plasma-mass spectrometry

    Science.gov (United States)

    Liu, Ying; He, Man; Chen, Beibei; Hu, Bin

    2016-08-01

    A new method by coupling surfactant assisted dispersive liquid liquid microextraction (SA-DLLME) with electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS) was proposed for the analysis of gold nanoparticles (AuNPs) in environmental water samples. Effective separation of AuNPs from ionic gold species was achieved by using sodium thiosulphate as a complexing agent. Various experimental parameters affecting SA-DLLME of AuNPs, such as the organic solvent, organic solvent volume, pH of the sample, the kind of surfactant, surfactant concentration, vortex time, speed of centrifugation, centrifugation time, and different coating as well as sizes of AuNPs were investigated carefully. Furthermore, the interference of coexisting ions, dissolved organic matter (DOM) and other metal nanoparticles (NPs) were studied. Under the optimal conditions, a detection limit of 2.2 ng L- 1 and an enrichment factor of 152-fold was achieved for AuNPs, and the original morphology of the AuNPs could be maintained during the extraction process. The developed method was successfully applied for the analysis of AuNPs in environmental water samples, including tap water, the East Lake water, and the Yangtze River water, with recoveries in the range of 89.6-102%. Compared with the established methods for metal NPs analysis, the proposed method has the merits of simple and fast operation, low detection limit, high selectivity, good tolerance to the sample matrix and no digestion or dilution required. It provides an efficient quantification methodology for monitoring AuNPs' pollution in the environmental water and evaluating its toxicity.

  19. Experimental and theoretical investigation for the suppression of the plasma arc drop in the thermionic converter

    Science.gov (United States)

    Shaw, D. T.; Manikopoulos, C. N.; Chang, T.; Lee, C. H.; Chiu, N.

    1977-01-01

    Ion generation and recombination mechanisms in the cesium plasma as they pertain to the advanced mode thermionic energy converter were studied. The decay of highly ionized cesium plasma was studied in the near afterglow to examine the recombination processes. Very low recombination in such a plasma may prove to be of considerable importance in practical converters. The approaches of external cesium generation were vibrationally excited nitrogen as an energy source of ionization of cesium ion, and microwave power as a means of resonant sustenance of the cesium plasma. Experimental data obtained so far show that all three techniques - i.e., the non-LTE high-voltage pulsing, the energy transfer from vibrationally excited diatomic gases, and the external pumping with a microwave resonant cavity - can produce plasmas with their densities significantly higher than the Richardson density. The implication of these findings as related to Lam's theory is discussed.

  20. Analysis of silver and gold nanoparticles in environmental water using single particle-inductively coupled plasma-mass spectrometry.

    Science.gov (United States)

    Yang, Yuan; Long, Chen-Lu; Li, Hai-Pu; Wang, Qiang; Yang, Zhao-Guang

    2016-09-01

    The production and use of engineering nanomaterials (ENMs) leads to the release of manufactured or engineered nanoparticles into environment. The quantification and characterization of ENMs are crucial for the assessment of their environmental fate, transport behavior and health risks to humans. To analyze the size distribution and particle number concentration of AgNPs and AuNPs in environmental water and track their stability at low number concentration, a systematic study on SP-ICPMS was presented. The Poisson statistics was used to discuss the effect of dwell time and particle number concentration theoretically on the detection of NPs in solution by SP-ICPMS. The dynamic range of SP-ICPMS is approximately two orders of magnitude. The size detection limits for silver and gold nanoparticle in ultrapure water are 20 and 19nm respectively. The detection limit of nanoparticle number concentration is 8×10(4)particlesL(-1). Size distribution of commercial silver and gold nanoparticle dispersions is determined by SP-ICP-MS, which was in accordance with the TEM results. High particle concentration recoveries of spiked AgNPs and AuNPs are obtained (80-108% and 85-107% for AgNPs and AuNPs respectively in ultrapure and filtered natural water). It indicates that SP-ICPMS can be used to detect AgNPs and AuNPs. The filtration study with different membranes showed that filtration might be a problematic pre-treatment method for the detection of AgNPs and AuNPs in environmental water. Furthermore, the stability of citrate-coated AgNPs and tannic acid-coated AuNPs spiked into filtrated natural and waste water matrix was also studied at low concentration using SP-ICP-MS measurements. Dissolution of AgNPs was observed while AuNPs was stable during a ten day incubation period. Finally SP-ICPMS was used to analyze NPs in natural water and waste water. The results indicate that SP-ICPMS can be used to size metallic nanoparticles sensitively of low concentration under realistic

  1. Rapid determination of dopamine in human plasma using a gold nanoparticle-based dual-mode sensing system.

    Science.gov (United States)

    Zhang, Yali; Qi, Suijian; Liu, Zhonggang; Shi, Yupeng; Yue, Wanqing; Yi, Changqing

    2016-04-01

    Dopamine plays a very important role in biological systems and has a direct relationship with the ability of learning and cognition, human desires, feelings and mental state, as well as motor functions. Traditional methods for the detection of dopamine are complicated and time-consuming, therefore it is necessary to explore rapid and accurate detection of dopamine with high sensitivity and specificity. Herein we report a dual-mode system of colorimetric and fluorometric analyses based on gold nanoparticles (AuNPs) and aptamers specifically targeting dopamine. Aptamers modified with the fluorophore were used as dopamine specific recognition probe and the sensing mechanism is based on the color change of AuNPs and the fluorescence recovery of fluorophore conjugated on the aptamers in the presence of dopamine. The addition of aptamers into AuNPs colloid solution would prevent the AuNPs from aggregation in the high-salt solution. The close distance between AuNPs and fluorophore conjugated on the aptamers would lead to the quenching of fluorescence signal. In the presence of dopamine, the conformation of the aptamers and the inter-particle distance would be changed, leading to the aggregation of AuNPs, which subsequently results in color change from red to blue and fluorescence signal recovery. The dual-mode sensing system demonstrated high specificity towards dopamine with the detection limit as low as 78.7 nM. The sensing system reflects on its simplicity as no surface functionalization is required for the nanoparticles, leading to less laborious and more cost-effective synthesis. The reaction time is only 6 min, demonstrating a simple approach for rapid analysis of dopamine. More importantly, the sensing system allows the detection of dopamine in both aqueous solution and complicated biological sample with sensitive response, illustrating the feasibility and reliability for the potential applications in clinical and biomedical analysis in the future.

  2. Characterization of gold nanoparticle uptake by tomato plants using enzymatic extraction followed by single-particle inductively coupled plasma-mass spectrometry analysis.

    Science.gov (United States)

    Dan, Yongbo; Zhang, Weilan; Xue, Runmiao; Ma, Xingmao; Stephan, Chady; Shi, Honglan

    2015-03-01

    Plant uptake and accumulation of nanoparticles (NPs) represent an important pathway for potential human expose to NPs. Consequently, it is imperative to understand the uptake of accumulation of NPs in plant tissues and their unique physical and chemical properties within plant tissues. Current technologies are limited in revealing the unique characteristics of NPs after they enter plant tissues. An enzymatic digestion method, followed by single-particle inductively coupled plasma-mass spectrometry (SP-ICP-MS) analysis, was developed for simultaneous determination of gold NP (AuNP) size, size distribution, particle concentration, and dissolved Au concentration in tomato plant tissues. The experimental results showed that Macerozyme R-10 enzyme was capable of extracting AuNPs from tomato plants without causing dissolution or aggregation of AuNPs. The detection limit for quantification of AuNP size was 20 nm, and the AuNP particle concentration detection limit was 1000 NPs/mL. The particle concentration recoveries of spiked AuNPs were high (79-96%) in quality control samples. The developed SP-ICP-MS method was able to accurately measure AuNP size, size distribution, and particle concentration in the plant matrix. The dosing study indicated that tomato can uptake AuNPs as intact particles without alternating the AuNP properties.

  3. Neutral and non-neutral collisionless plasma equilibria for twisted flux tubes: The Gold-Hoyle model in a background field

    CERN Document Server

    Allanson, O; Neukirch, T

    2016-01-01

    We calculate exact one-dimensional collisionless plasma equilibria for a continuum of flux tube models, for which the total magnetic field is made up of the `force-free' Gold-Hoyle magnetic flux tube embedded in a uniform and anti-parallel background magnetic field. For a sufficiently weak background magnetic field, the axial component of the total magnetic field reverses at some finite radius. The presence of the background magnetic field means that the total system is not exactly force-free, but by reducing its magnitude the departure from force-free can be made as small as desired. The distribution function for each species is a function of the three constants of motion; namely the Hamiltonian and the canonical momenta in the axial and azimuthal directions. Poisson's Equation and Amp\\`{e}re's Law are solved exactly, and the solution allows either electrically neutral or non-neutral configurations, depending on the values of the bulk ion and electron flows. These equilibria have possible applications in var...

  4. Quantitative characterization of gold nanoparticles by field-flow fractionation coupled online with light scattering detection and inductively coupled plasma mass spectrometry.

    Science.gov (United States)

    Schmidt, Bjørn; Loeschner, Katrin; Hadrup, Niels; Mortensen, Alicja; Sloth, Jens J; Koch, Christian Bender; Larsen, Erik H

    2011-04-01

    An analytical platform coupling asymmetric flow field-flow fractionation (AF(4)) with multiangle light scattering (MALS), dynamic light scattering (DLS), and inductively coupled plasma mass spectrometry (ICPMS) was established and used for separation and quantitative determination of size and mass concentration of nanoparticles (NPs) in aqueous suspension. Mixtures of three polystyrene (PS) NPs between 20 and 100 nm in diameter and mixtures of three gold (Au) NPs between 10 and 60 nm in diameter were separated by AF(4). The geometric diameters of the separated PS NPs and the hydrodynamic diameters of the Au and PS NPs were determined online by MALS and DLS, respectively. The three separated Au NPs were quantified by ICPMS and recovered at 50-95% of the injected masses, which ranged between approximately 8-80 ng of each nanoparticle size. Au NPs adhering to the membrane in the separation channel was found to be a major cause for incomplete recoveries. The lower limit of detection (LOD) ranged between 0.02 ng Au and 0.4 ng Au, with increasing LOD by increasing nanoparticle diameter. The analytical platform was applied to characterization of Au NPs in livers of rats, which were dosed with 10 nm, 60 nm, or a mixture of 10 and 60 nm nanoparticles by intravenous injection. The homogenized livers were solubilized in tetramethylammonium hydroxide (TMAH), and the recovery of Au NPs from the livers amounted to 86-123% of their total Au content. In spite of successful stabilization with bovine serum albumin even in alkaline medium, separation of the Au NPs by AF(4) was not possible due to association with undissolved remains of the alkali-treated liver tissues as demonstrated by electron microscopy images.

  5. Solar Prominence Modelling and Plasma Diagnostics at ALMA Wavelengths

    Science.gov (United States)

    Rodger, Andrew; Labrosse, Nicolas

    2017-09-01

    Our aim is to test potential solar prominence plasma diagnostics as obtained with the new solar capability of the Atacama Large Millimeter/submillimeter Array (ALMA). We investigate the thermal and plasma diagnostic potential of ALMA for solar prominences through the computation of brightness temperatures at ALMA wavelengths. The brightness temperature, for a chosen line of sight, is calculated using the densities of electrons, hydrogen, and helium obtained from a radiative transfer code under non-local thermodynamic equilibrium (non-LTE) conditions, as well as the input internal parameters of the prominence model in consideration. Two distinct sets of prominence models were used: isothermal-isobaric fine-structure threads, and large-scale structures with radially increasing temperature distributions representing the prominence-to-corona transition region. We compute brightness temperatures over the range of wavelengths in which ALMA is capable of observing (0.32 - 9.6 mm), however, we particularly focus on the bands available to solar observers in ALMA cycles 4 and 5, namely 2.6 - 3.6 mm (Band 3) and 1.1 - 1.4 mm (Band 6). We show how the computed brightness temperatures and optical thicknesses in our models vary with the plasma parameters (temperature and pressure) and the wavelength of observation. We then study how ALMA observables such as the ratio of brightness temperatures at two frequencies can be used to estimate the optical thickness and the emission measure for isothermal and non-isothermal prominences. From this study we conclude that for both sets of models, ALMA presents a strong thermal diagnostic capability, provided that the interpretation of observations is supported by the use of non-LTE simulation results.

  6. The RHIC gold rush

    Energy Technology Data Exchange (ETDEWEB)

    Schaefer, T. [Department of Physics, North Carolina State University (United States)

    2003-06-01

    Physicists are colliding gold nuclei to recreate the fireball that existed in the very early universe, and they may have found evidence for quark-gluon plasma. What happens to ordinary matter as you heat it to higher and higher temperatures, or compress it to greater and greater densities? This simple question underpins a major effort to create extreme conditions in the lab, which has recently taken the shape of the Relativistic Heavy Ion Collider (RHIC). This machine has been colliding gold nuclei since 2000, and has produced tantalizing hints that a new state of matter - the quark-gluon plasma - is created in the reactions. But it has also sparked surprises that are sending researchers back to the drawing board. (U.K.)

  7. The RHIC gold rush

    CERN Document Server

    Schäfer, T

    2003-01-01

    Physicists are colliding gold nuclei to recreate the fireball that existed in the very early universe, and they may have found evidence for quark-gluon plasma. What happens to ordinary matter as you heat it to higher and higher temperatures, or compress it to greater and greater densities? This simple question underpins a major effort to create extreme conditions in the lab, which has recently taken the shape of the Relativistic Heavy Ion Collider (RHIC). This machine has been colliding gold nuclei since 2000, and has produced tantalizing hints that a new state of matter - the quark-gluon plasma - is created in the reactions. But it has also sparked surprises that are sending researchers back to the drawing board. (U.K.)

  8. Advances in experimental spectroscopy of Z-pinch plasmas and applications

    Science.gov (United States)

    Kantsyrev, V. L.; Safronova, A. S.; Safronova, U. I.; Shrestha, I.; Weller, M. E.; Osborne, G. C.; Shlyaptseva, V. V.; Wilcox, P. G.; Stafford, A.

    2012-06-01

    Recent advances in experimental work on plasma spectroscopy of Z-pinches are presented. The results of experiments on the 1.7 MA Z-pinch Zebra generator at UNR with wire arrays of various configurations and X-pinches are overviewed. A full x-ray and EUV diagnostic set for detailed spatial and temporal monitoring of such plasmas together with theoretical support from relativistic atomic structure and non-LTE kinetic codes used in the analysis are discussed. The use of a variety of wire materials in a broad range from Al to W provided an excellent opportunity to observe and study specific atomic and plasma spectroscopy features. In addition, the applications of such features to fusion and astrophysics will be considered.

  9. New approaches for the reduction of plasma arc drop in second-generation thermionic converters

    Science.gov (United States)

    Hatziprokopiou, M. E.; Shaw, D. T.

    1981-03-01

    Investigations of ion generation and recombination mechanisms in the cesium plasma are described with respect to the advanced mode thermionic energy converter. The changes in plasma density and temperature within the converter were studied under the influence of several promising auxiliary ionization candidate sources. Three novel approaches of external cesium ion generation were studied in some detail, namely vibrationally excited N2 as an energy source of ionization of Cs ions in a dc discharge, microwave power as a means of resonant sustenance of the cesium plasma, and ion generation in a pulse N2-Cs mixture. The data obtained show that all three techniques - i.e., the non-LTE high voltage pulsing, the energy transfer from vibrationally excited diatomic gases, and the external pumping with a microwave power have considerable promise as schemes in auxiliary ion generation applicable to the advanced thermionic energy converter.

  10. A rapid and practical strategy for the determination of platinum, palladium, ruthenium, rhodium, iridium and gold in large amounts of ultrabasic rock by inductively coupled plasma optical emission spectrometry combined with ultrasound extraction

    Science.gov (United States)

    Zhang, Gai; Tian, Min

    2015-04-01

    This proposed method regulated the determination of platinum, palladium, ruthenium, rhodium, iridium and gold in platinum-group ores by nickel sulfide fire assay—inductively coupled plasma optical emission spectrometry (ICP-OES) combined with ultrasound extraction for the first time. The quantitative limits were 0.013-0.023μg/g. The samples were fused to separate the platinum-group elements from matrix. The nickel sulfide button was then dissolved with hydrochloric acid and the insoluble platinum-group sulfide residue was dissolved with aqua regia by ultrasound bath and finally determined by ICP-OES. The proposed method has been applied into the determination of platinum-group element and gold in large amounts of ultrabasic rocks from the Great Dyke of Zimbabwe.

  11. Calculation of 2-temperature plasma thermo-physical properties considering condensed phases: application to CO2-CH4 plasma: part 1. Composition and thermodynamic properties

    Science.gov (United States)

    Wu, Yi; Chen, Zhexin; Rong, Mingzhe; Cressault, Yann; Yang, Fei; Niu, Chunping; Sun, Hao

    2016-10-01

    As the first part of this series of papers, a new calculation method for composition and thermodynamic properties of 2-temperature plasma considering condensed species under local chemical equilibrium (LCE) and local phase equilibrium assumption is presented. The 2-T mass action law and chemical potential are used to determine the composition of multiphase system. The thermo-physical properties of CO2-CH4 mixture, which may be a possible substitution for SF6, are calculated by this method as an example. The influence of condensed graphite, non-LTE effect, mixture ratio and pressure on the thermo-physical properties has been discussed. The results will serve as reliable reference data for computational simulation of CO2-CH4 plasmas.

  12. Laser Desorption Ionization Quadrupole Ion Trap Time-of-Flight Mass Spectrometry of Au m Fe n +/- Clusters Generated from Gold-Iron Nanoparticles and their Giant Nanoflowers. Electrochemical and/or Plasma Assisted Synthesis

    Science.gov (United States)

    Mawale, Ravi Madhukar; Ausekar, Mayuri Vilas; Pavliňák, David; Galmiz, Oleksandr; Kubáček, Pavel; Havel, Josef

    2017-02-01

    Gold nanoparticles (NP) with average diameter 100 nm synthesized from tetrachloroauric acid solution using stainless steel as a reducing agent were found to contain iron. Applying simultaneously high frequency (HF) plasma discharge in solution during the electrochemical reduction, giant gold-iron nanoflowers with average size 1000-5000 nm were formed. Scanning electron microscopy (SEM) shows the morphology of the nanopowders produced as polygonal yet nearly spherical, whereas iron content in both products determined by energy dispersive X-ray analysis (EDX) was found to be at 2.5 at. %. Laser desorption ionization (LDI) of both nanomaterials and mass spectrometric analysis show the formation of Au m Fe n +/- ( m = 1-35; n = 1-3) clusters. Structure of few selected clusters in neutral or monocharged forms were computed by density functional theory (DFT) calculations and it was found that typical distances of an iron nucleus from adjacent gold nuclei lie in the interval 2.5 to 2.7 Å. Synthetized Au-Fe nanoparticles were found stable for at least 2 mo at room temperature (even in aqueous solution) without any stabilizing agent. Produced Au-Fe nanoparticles in combination with standard MALDI matrices enhance ionization of peptides and might find use in nanomedicine.

  13. New approaches for the reduction of plasma arc drop in second-generation thermionic converters. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hatziprokopiou, M.E.; Shaw, D.T.

    1981-03-31

    Investigations of ion generation and recombination mechanisms in the cesium plasma as they pertain to the advanced mode thermionic energy converter are described. The changes in plasma density and temperature within the converter have been studied under the influence of several promising auxiliary ionization candidate sources. Three novel approaches of external cesium ion generation have been investigated in some detail, namely vibrationally excited N/sub 2/ as an energy source of ionization of Cs ions in a DC discharge, microwave power as a means of resonant sustenance of the cesium plasma, and ion generation in a pulse N/sub 2/-Cs mixture. The experimental data obtained and discussed show that all three techniques - i.e. the non-LTE high-voltage pulsing, the energy transfer from vibrationally excited diatomic gases, and the external pumping with a microwave power - have considerable promise as schemes in auxiliary ion generation applicable to the advanced thermionic energy converter.

  14. Two-temperature transport coefficients of SF{sub 6}–N{sub 2} plasma

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Fei; Chen, Zhexin; Wu, Yi, E-mail: wuyic51@mail.xjtu.edu.cn; Rong, Mingzhe; Wang, Chunlin [State Key Laboratory of Electrical Insulation and Power Equipment, School of Electrical Engineering, Xi' an Jiaotong University, Xi' an 710049 (China); Guo, Anxiang; Liu, Zirui [Electric Power Research Institute of State Grid Shaanxi Electric Power Company, Xian (China)

    2015-10-15

    Sulfur hexafluoride (SF{sub 6}) is widely adopted in electric power industry, especially in high-voltage circuit breakers and gas-insulated switchgear. However, the use of SF{sub 6} is limited by its high liquidation temperature and high global warming potential. Recently, research shows SF{sub 6}–N{sub 2} mixture, which shows environmental friendliness and good electrical properties, may be a feasible substitute for pure SF{sub 6}. This paper is devoted to the calculation of and transport coefficients of SF{sub 6}–N{sub 2} mixture under both LTE (local thermodynamic equilibrium) and non-LTE condition. The two–temperature mass action law was used to determine the composition. The transport coefficients were calculated by classical Chapman–Enskog method simplified by Devoto. The thermophysical properties are presented for electron temperatures of 300–40 000 K, ratios of electron to heavy species temperature of 1–10 and N{sub 2} mole fraction of 0%–100% at atmospheric pressure. The ionization processes under both LTE and non-LTE have been discussed. The results show that deviations from local thermodynamic equilibrium significantly affect the properties of SF{sub 6}–N{sub 2} plasma, especially before the plasma is fully ionized. The different influence of N{sub 2} on properties for SF{sub 6}–N{sub 2} plasma in and out of LTE has been found. The results will serve as reliable reference data for computational simulation of the behavior of SF{sub 6}–N{sub 2} plasmas.

  15. [Intracellular gold content of circulating blood cells using various gold compounds].

    Science.gov (United States)

    Herrlinger, J D; Beress, R; Hecker, U

    1984-01-01

    Evidence on the action mechanisms of gold salts in the treatment of rheumatoid arthritis is still inconclusive. The intracellular localization of the place of action is likely. Therefore not only the serum gold levels but also the intracellular concentration of gold are of special interest. We measured the gold concentration in the serum and in the blood cells after in vitro application of aurothiomalate (Tauredon), gold keratinate (Auro-Detoxin) and triethylphosphine-gold (Ridaura) and in blood samples of patients undergoing these gold salts treatments. Cell-bound concentrations were found to vary extensively as a function of the gold compound used. While no or very little gold was present intracellularly after administration of the 2 parenteral drugs, up to 40% of the circulating gold was found to bind to the cells after administration of the triethylphosphine compound for gastro-intestinal absorption. The red cell concentration was more or less the same as that in the extracellular compartment. Gold apparently accumulated in the white cells, because the cell-bound concentration relative to unit volume was up to 20 times higher than the plasma level. The method used did not offer any information on the actual binding site of gold in white cells, i.e. cytoplasm versus nucleus versus cell membrane.

  16. Gold concentration in blood in relation to the number of gold restorations and contact allergy to gold.

    Science.gov (United States)

    Ahnlide, Ingela; Ahlgren, Camilla; Björkner, Bert; Bruze, Magnus; Lundh, Thomas; Möller, Halvor; Nilner, Krister; Schütz, Andrejs

    2002-10-01

    Previous studies have demonstrated an association between gold allergy and the presence of dental gold restorations. The aim of the present study was to investigate the relationship between the concentration of gold in blood (B-Au) and the number of tooth surfaces with gold alloys in subjects with and without contact allergy to gold. In 80 patients referred for patch testing because of eczematous disease, blood samples were taken and analyzed for B-Au using inductively coupled plasma mass spectrometry. The detection limit for the Au determination was 0.04 microg/L. In addition, a dentist made a clinical and radiological examination of the patients and registered the number of dental gold surfaces. Patients with dental gold restorations had a statistically significantly higher B-Au in Mann-Whitney U test (P = 0.025), (range < 0.04-1.07 microg/L) than patients without (range < 0.04-0.15 microg/L). Furthermore, a positive correlation was found between B-Au and the number of dental gold surfaces (P < 0.01). There was no statistically significant difference in B-Au between persons with and without contact allergy to gold. The study thus indicates that gold is released from dental restorations and taken tip into the circulation.

  17. Protracted elimination of gold nanoparticles from mouse liver

    DEFF Research Database (Denmark)

    Sadauskas, Evaldas; Wallin, Håkan; Stoltenberg, Meredin

    2009-01-01

    The present study aims at revealing the fate of 40-nm gold nanoparticles after intravenous injections. The gold nanoparticles were traced histochemically with light and transmission electron microscopy using autometallographic (AMG) staining, and the gold content in the liver was determined...... with inductively coupled plasma mass spectrometry (ICP-MS). Gold nanoparticles were identified in almost all Kupffer cells one day after the injection, but the fraction of gold-loaded cells gradually decreased to about one fifth after 6 months. Transmission electron microscopic analysis showed that the gold......% fall in the gold content over the observed 6 months, the AMG finding of a significant reduction in the stained area of the liver sections and number of macrophages loaded with gold nanoparticles reveals that over time an increasing part of the total amount of gold nanoparticles in the liver...

  18. Calculation of 2-temperature plasma thermo-physical properties considering condensed phases: application to CO2-CH4 plasma: part 2. Transport coefficients

    Science.gov (United States)

    Niu, Chunping; Chen, Zhexin; Rong, Mingzhe; Wang, Chunlin; Wu, Yi; Yang, Fei; Wang, Xiaohua; Pang, Qingping

    2016-10-01

    The transport coefficients, namely thermal conductivity, viscosity and electrical conductivity, of CO2-CH4 mixture in and out of LTE are calculated in this paper. The calculation was based on local chemical equilibrium (LCE) and local phase equilibrium assumption. The 2-temperature composition results obtained with consideration of condensed phase in the previous paper (Part I) of this series were used in this calculation. The transport coefficients were calculated by classical Chapman-Enskog method simplified by Devoto. The results are presented for different temperatures (300-30 000 K), pressures (0.1-10 atm), non-equilibrium degrees (1-5), and CH4 molar proportions (0-100%). The influence of condensed graphite, non-LTE effect, mixture ratio and pressure on the composition and thermodynamic properties has been discussed. The results will serve as reliable reference data for computational simulation of CO2-CH4 plasmas.

  19. Fractionation and Characterization of High Aspect Ratio Gold Nanorods Using Asymmetric-Flow Field Flow Fractionation and Single Particle Inductively Coupled Plasma Mass Spectrometry

    OpenAIRE

    Nguyen, Thao M; Jingyu Liu; Vincent A. Hackley

    2015-01-01

    Gold nanorods (GNRs) are of particular interest for biomedical applications due to their unique size-dependent longitudinal surface plasmon resonance band in the visible to near-infrared. Purified GNRs are essential for the advancement of technologies based on these materials. Used in concert, asymmetric-flow field flow fractionation (A4F) and single particle inductively coupled mass spectrometry (spICP-MS) provide unique advantages for fractionating and analyzing the typically complex mixtur...

  20. Plasma metallization

    CERN Document Server

    Crowther, J M

    1997-01-01

    Many methods are currently used for the production of thin metal films. However, all of these have drawbacks associated with them, for example the need for UHV conditions, high temperatures, exotic metal precursors, or the inability to coat complex shaped objects. Reduction of supported metal salts by non-isothermal plasma treatment does not suffer from these drawbacks. In order to produce and analyse metal films before they become contaminated, a plasma chamber which could be attached directly to a UHV chamber with XPS capability was designed and built. This allowed plasma treatment of supported metal salts and surface analysis by XPS to be performed without exposure of the metal film to the atmosphere. Non-equilibrium plasma treatment of Nylon 66 supported gold(lll) chloride using hydrogen as the feed gas resulted in a 95% pure gold film, the remaining 5% of the film being carbon. If argon or helium were used as the feed gases during plasma treatment the resultant gold films were 100% pure. Some degree of s...

  1. Black gold

    CERN Document Server

    Fletcher, MW

    2016-01-01

    Following the Yom Kippur war of October 1973, OPEC raises the price of oil by 70% along with a 5% reduction in oil production. Len Saunders a highly skilled and knowledgeable British engineer for Jaguar motors, is approached by the UK energy commission in the January of 1974 to create a new propulsion system; using a secret document from a German WW2 scientist, that they have come into possession of. Len Saunders sets to work on creating the holy grail of energy. Seven years later 1981, Haidar Farooq the Kuwait oil minister working at OPEC and head of a secret organisation named Black Gold bec

  2. Going for Gold

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    While the international gold price in February hit the highest point in 25 years at $541.20 per ounce for futures delivery, a new gold rush is sweeping across China. According to the World Gold Council, the London-based gold marketing organization funded by leading global gold mining firms, the purchase of gold products in China grew by 9 percent in the first nine

  3. Gold in Modern Economy

    Directory of Open Access Journals (Sweden)

    Boryshkevych Olena V.

    2014-01-01

    Full Text Available The article studies the role of gold in modern economy. It analyses dynamics and modern state of the gold market. It studies volumes of contracts in exchange and off-exchange markets. In order to reveal changes of key features of the gold market, it focuses on the study of gold demand volumes, studies volumes and geographical changes in the world gold mining, and analyses volumes of monetary gold of central banks and its share in gold and currency reserves. It analyses price fluctuations in the gold market during 1968 – 2013 and identifies main factors that determine the gold price. It identifies interconnection between the state of the gold market and financial markets of countries. The study showed that namely geopolitical and economic instability restricts the spectrum of financial assets for investing and gold is not only a safe investment object but also a profitable one.

  4. Quantitative Characterization of Gold Nanoparticles by Field-Flow Fractionation Coupled Online with Light Scattering Detection and Inductively Coupled Plasma Mass Spectrometry

    DEFF Research Database (Denmark)

    Schmidt, Bjørn; Löschner, Katrin; Hadrup, Niels

    2011-01-01

    An analytical platform coupling asymmetric flow field-flow fractionation (AF4) with multiangle light scattering (MALS), dynamic light scattering (DLS), and inductively coupled plasma mass spectrometry (ICPMS) was established and used for separation and quantitative determination of size and mass ...

  5. Carbon nanotubes decorated with gold, platinum and rhodium clusters by injection of colloidal solutions into the post-discharge of an RF atmospheric plasma

    Energy Technology Data Exchange (ETDEWEB)

    Claessens, N; Demoisson, F; Dufour, T; Reniers, F [Service de Chimie Analytique et Chimie des Interfaces (CHANI), Universite Libre de Bruxelles, Faculte des Sciences, CP255, Boulevard du Triomphe 2, B-1050 Bruxelles (Belgium); Mansour, Ali; Guillot, J [Department ' Science and Analysis of Materials' (SAM), Centre de Recherche Public-Gabriel Lippmann, 41 rue du Brill, L-4422 Belvaux (Luxembourg); Felten, A; Pireaux, J-J [Facultes Universitaires Notre-Dame de la Paix, Centre de Recherche en Physique de la Matiere et du Rayonnement (PMR), 61 rue de Bruxelles, B-5000 Namur (Belgium)

    2010-09-24

    In this paper, we present a new, simple, robust and efficient technique to decorate multi-wall carbon nanotubes (MWCNT) with metal nanoparticles. As case studies, Au, Pt and Rh nanoparticles are grafted onto MWCNTs by spraying a colloidal solution into the post-discharge of an atmospheric argon or argon/oxygen RF plasma. The method that we introduce here is different from those usually described in the literature, since the treatment is operated at atmospheric pressure, allowing the realization in only one step of the surface activation and the deposition processes. We demonstrate experimentally that the addition of oxygen gas in the plasma increases significantly the amount of grafted metal nanoparticles. Moreover, TEM pictures clearly show that the grafted nanoparticles are well controlled in size.

  6. Fractionation and Characterization of High Aspect Ratio Gold Nanorods Using Asymmetric-Flow Field Flow Fractionation and Single Particle Inductively Coupled Plasma Mass Spectrometry

    Directory of Open Access Journals (Sweden)

    Thao M. Nguyen

    2015-07-01

    Full Text Available Gold nanorods (GNRs are of particular interest for biomedical applications due to their unique size-dependent longitudinal surface plasmon resonance band in the visible to near-infrared. Purified GNRs are essential for the advancement of technologies based on these materials. Used in concert, asymmetric-flow field flow fractionation (A4F and single particle inductively coupled mass spectrometry (spICP-MS provide unique advantages for fractionating and analyzing the typically complex mixtures produced by common synthetic procedures. A4F fractions collected at specific elution times were analyzed off-line by spICP-MS. The individual particle masses were obtained by conversion of the ICP-MS pulse intensity for each detected particle event, using a defined calibration procedure. Size distributions were then derived by transforming particle mass to length assuming a fixed diameter. The resulting particle lengths correlated closely with ex situ transmission electron microscopy. In contrast to our previously reported observations on the fractionation of low-aspect ratio (AR GNRs (AR < 4, under optimal A4F separation conditions the results for high-AR GNRs of fixed diameter (≈20 nm suggest normal, rather than steric, mode elution (i.e., shorter rods with lower AR generally elute first. The relatively narrow populations in late eluting fractions suggest the method can be used to collect and analyze specific length fractions; it is feasible that A4F could be appropriately modified for industrial scale purification of GNRs.

  7. A dual-mode nanosensor based on carbon quantum dots and gold nanoparticles for discriminative detection of glutathione in human plasma.

    Science.gov (United States)

    Shi, Yupeng; Pan, Yi; Zhang, Heng; Zhang, Zhaomin; Li, Mei-Jin; Yi, Changqing; Yang, Mengsu

    2014-06-15

    Glutathione (GSH) plays key roles in biological systems and serves many cellular functions. Since biothiols all incorporate thiol, carboxylic and amino groups, discriminative detection of GSH over cysteine (Cys) and homocysteine (Hcy) is still challenging. We herein report a dual-mode nanosensor with both colorimetric and fluorometric readout based on carbon quantum dots and gold nanoparticles for discriminative detection of GSH over Cys/Hcy. The proposed sensing system consists of AuNPs and fluorescent carbon quantum dots (CQDs), where CQDs function as fluorometric reporter, and AuNPs serve a dual function as colorimetric reporter and fluorescence quencher. The mechanism of the nanosensor is based on two distance-dependent phenomenons, color change of AuNPs and FRET. Through controlling the surface properties of as-prepared nanoparticles, the addition of CQDs into AuNPs colloid solution might induce the aggregation of AuNPs and CQDs, leading to AuNPs color changing from red to blue and CQDs fluorescence quench. However, the presence of GSH can protect AuNPs from being aggregated and enlarge the inter-particle distance, which subsequently produces color change and fluorescent signal recovery. The nanosensor described in this report reflects on its simplicity and flexibility, where no further surface functionalization is required for the as-prepared nanoparticles, leading to less laborious and more cost-effective synthesis. The proposed dual-mode nanosensor demonstrated highly selectivity toward GSH, and allows the detection of GSH as low as 50 nM. More importantly, the nanosensor could not only function in aqueous solution for GSH detection with high sensitivity but also exhibit sensitive responses toward GSH in complicated biological environments, demonstrating its potential in bioanalysis and biodection, which might be significant in disease diagnosis in the future.

  8. Functionalization of gold nanoparticles as antidiabetic nanomaterial.

    Science.gov (United States)

    Venkatachalam, M; Govindaraju, K; Mohamed Sadiq, A; Tamilselvan, S; Ganesh Kumar, V; Singaravelu, G

    2013-12-01

    In the present investigation, functionalization of gold nanoparticles synthesized using propanoic acid 2-(3-acetoxy-4,4,14-trimethylandrost-8-en-17-yl) (PAT) an active biocomponent isolated from Cassia auriculata is studied in detail. On reaction of PAT with aqueous HAuCl4, rapid formation of stable gold nanoparticles was achieved. Formation of gold nanoparticles was confirmed by UV-vis spectroscopy, XRD, GC-MS,FTIR, TEM and SEM with EDAX. Gold nanoparticles mostly were monodisperse, spherical in shape and ranged in size 12-41 nm. Gold nanoparticles synthesised using PAT was administered to alloxan (150 mg/kg body weight) induced diabetic male albino rats at different doses (0.25, 0.5, 0.75 and 1.0mg/kg body weight) for 28 days. Plasma glucose level, cholesterol and triglyceride were significantly (pgold nanoparticles at dosage of 0.5mg/kg body weight and plasma insulin increased significantly. The newly genre green gold nanoparticles exhibit remarkable protein tyrosine phosphatase 1B inhibitory activity.

  9. Gold nanoparticles as intermediate ligands for polymer monolithic capillary microextraction of trace rare earth elements followed by inductively coupled plasma mass spectrometry detection

    Science.gov (United States)

    Cai, Yabing; Chen, Beibei; He, Man; Liu, Xiaolan; Bin, Hu

    2017-01-01

    In this work, a novel method of Au nanoparticles (NPs) modified polymer monolithic capillary microextraction (CME) on-line coupling with inductively coupled plasma-mass spectrometry (ICP-MS) was developed for the determination of trace rare earth elements (REEs) in environmental and biological samples. The poly(glycidyl methacrylate-ethylene dimethacrylate) monolithic capillary was prepared, functionalized with thiol ligands for the attaching of Au NPs, and then modified with mercaptosuccinic acid to provide massive carboxyl groups which have high affinity to REEs. With the modification of Au NPs, the adsorption capacity of the monolith towards target REEs has been improved by 3 to 6.5 times. Under the optimized conditions, the limits of detection of the developed method for REEs were in the range of 0.16 (Tb)-0.85 (Gd) ng L- 1. The enrichment factor was 25-fold with the sample throughput of 10 h- 1. And the relative standard deviations were between 2.7 (Lu) and 9.8% (Dy) (c = 10 ng L- 1, n = 9). The accuracy of the method was validated by the analysis of a standard stock solution of GSB04-1789-2004 and a Certified Reference Material of GBW07301a stream sediment. The proposed method was applied for the analysis of trace REEs in seawater samples as well as human whole blood with good recoveries. The prepared monolith is featured with strong anti-interference ability, superior adsorption capacity as well as long lifespan, and the developed monolithic CME-ICP-MS is sensitive, simple and rapid for the analysis of trace/ultra-trace REEs in environmental and biological samples with complex matrix.

  10. Biodistribution of gold nanoparticles following intratracheal instillation in mouse lung

    DEFF Research Database (Denmark)

    Sadauskas, Evaldas; Jacobsen, Nicklas R.; Danscher, Gorm

    2009-01-01

    repeatedly during 3 weeks, the load was substantial. Ultrastructurally, AMG silver enhanced gold nanoparticles were found in lysosome-/endosome-like organelles of the macrophages and analysis with AMG, ICP-MS and NAA of the liver revealed an almost total lack of translocation of nanoparticles. In mice given......Background The fate of gold nanoparticles, 2, 40 and 100 nm, administered intratracheally to adult female mice was examined. The nanoparticles were traced by autometallography (AMG) at both ultrastructural and light microscopic levels. Also, the gold content was quantified by inductively coupled...... plasma mass spectrometry (ICP-MS) and neutron activation analysis (NAA). The liver is the major site of deposition of circulating gold nanoparticles. Therefore the degree of translocation was determined by the hepatic deposition of gold. Mice were instilled with 5 intratracheal doses of gold...

  11. Gold induced apoptsis study

    DEFF Research Database (Denmark)

    Laustsen, Christoffer

    2008-01-01

    Introduction   Cancer cells are highly thermo sensitive. On the basis of an article in Nature the idea arose, for a new non-invasive thermotherapy technique, based on radio frequency inductive heating of nano gold particles in an MR-scanner. Thermotherapy is getting considerably attention...... at the moment, especially in the fields of lasers, they though have some problems concerning the placement of the tumor in the human body. Local heating by MR has tremendous advance in comparison too lasers. The first step is to validate the hypothesis of the inductive heating of the gold nano particles trough...... in silico methods are here proposed for apoptosis studies and for AMG studies.   Methods   MR - heating of high concentration micrometer gold and low concentration nano gold.   CSLM of ethidum bromide stained cell lines, with and witout gold and automated image processing.   AMG gold uptake study...

  12. Cells adhesion and growth on gold nanoparticle grafted glass

    Energy Technology Data Exchange (ETDEWEB)

    Novotna, Zdenka, E-mail: zdenka1.novotna@vscht.cz [Department of Solid State Engineering, Institute of Chemical Technology Prague, 166 28 Prague (Czech Republic); Reznickova, Alena; Kvitek, Ondrej; Kasalkova, Nikola Slepickova [Department of Solid State Engineering, Institute of Chemical Technology Prague, 166 28 Prague (Czech Republic); Kolska, Zdenka [Faculty of Science, J. E. Purkyně University, Ústí nad Labem (Czech Republic); Svorcik, Vaclav [Department of Solid State Engineering, Institute of Chemical Technology Prague, 166 28 Prague (Czech Republic)

    2014-07-01

    The surface of glass substrate was plasma treated, coated by gold nano-structures and subsequently grafted with nanoparticles. The samples were plasma treated, sputtered with Au nanostructures which was followed by grafting with biphenyl-4,4'-dithiol (BPD) and then gold nanoparticles. The wettability, optical and chemical properties and surface morphology were studied. The adhesion and proliferation of vascular smooth muscle cells (VSMCs) on the samples were investigated in-vitro as well. Grafting of gold nanoparticles with the dithiol increases the UV–vis absorbance, the surface becomes more hydrophobic, rougher and more rugged compared to pristine, sputtered and only dithiol treated surface. Gold nano-particles bound over dithiol and Au nanostructures cause better cell proliferation than purely BPD treated or pristine glass.

  13. Gold in the Books

    Institute of Scientific and Technical Information of China (English)

    江河

    2002-01-01

    In the present Chinese market, more and more businessmen turn to the profit-making trade. Even some counters in the bookstores are selling gold rings, necklaces, bracelets, etc. One day a school teacher asked a store assistant,“Why are you selling gold in your bookstore?”

  14. Gold-Mining

    DEFF Research Database (Denmark)

    Raaballe, J.; Grundy, B.D.

    2002-01-01

    of operating gold mines. Asymmetric information on the reserves in the mine implies that, at a high enough price of gold, the manager of high type finds the extraction value of the company to be higher than the current market value of the non-operating gold mine. Due to this under valuation the maxim of market...... value maximization forces the manager of high type to extract the gold.The implications are three-fold. First, all managers (except the lowest type) extract the gold too soon compared to the first-best policy of leaving the gold in the mine forever. Second, a manager of high type extracts the gold...... sooner than a manager of lower type. Third, a non-operating gold mine is valued as being of the lowest type in the pool and all else equal, high-asymmetri mines are valued lower than low-asymmetri mines. In a qualitative sense these results are robust with respect to different assumptions (re cost...

  15. Optical properties of gold nanorods: DDA simulations supported by experiments.

    Science.gov (United States)

    Brioude, A; Jiang, X C; Pileni, M P

    2005-07-14

    Simulations of the absorption efficiency using the discrete dipole approximation (DDA) method and taking into account the real shape of gold nanorods are reported. A dominant surface plasma band corresponding to the longitudinal resonance is observed. Its maximum position lambda(max) shifts to the red as the aspect ratio increases. The transversal dipolar and multipolar mode wavelength positions are also discussed. These data are in good agreement with previous theoretical work based on classical electrostatic predictions and assuming that gold nanorods behave as ellipsoidal particles. From the experimental point of view, good agreement with the published data for gold nanorods is obtained.

  16. 16 CFR Appendix to Part 23 - Exemptions Recognized in the Assay for Quality of Gold Alloy, Gold Filled, Gold Overlay, Rolled...

    Science.gov (United States)

    2010-01-01

    ... Quality of Gold Alloy, Gold Filled, Gold Overlay, Rolled Gold Plate, Silver, and Platinum Industry...—Exemptions Recognized in the Assay for Quality of Gold Alloy, Gold Filled, Gold Overlay, Rolled Gold Plate... be considered in any assay for quality of a gold filled, gold overlay and rolled gold plate industry...

  17. Gold film resistor bolometric array

    Energy Technology Data Exchange (ETDEWEB)

    Yin Fuxian [Academia Sinica, Hefei, AH (China). Inst. of Plasma Physics

    1997-03-01

    A new type of bolometric array diagnostic system has been developed for HT-6M tokamak and HT-7 superconductor tokamak plasma physics experimental research. This system is composed of temperature-sensitive detectors of gold film resistor and phase-sensitive rectifiers of the bridge excited by square waves. With this system, a radiation detection limit of 192.0 {mu}W cm{sup -2} at a spatial resolution of 2.0 cm and a temporal resolution of 1.0 mS. The system features a high temperature baking resistance, ultra high vacuum endurance, sufficient insensitivity to radiation damage, sufficient suppression of electromagnetic interference, good long-term stability, high radiation sensitivity and measurement data reliability. Absolute calibration of the detectors is performed simultaneously and in situ by means of a built-in electronic power pulse. (orig.) 9 refs.

  18. Removal of internally deposited gold by 2,3-dimercaptopropane sodium sulphonate (Dimaval).

    OpenAIRE

    Gabard, B.

    1980-01-01

    1 Orally administered 2,3-dimercaptopropane sodium sulphonate (DMPS, Dimaval) reduced the concentration of gold in rats treated with Auro-Detoxin and increased the urinary excretion of the metal. 2 In a long-term experiment, DMPS decreased significantly the concentration of gold in the kidneys and in the skin and increased it in plasma. 3 DMPS appears to be of interest as a possible antidote to gold, which could replace the more toxic 2,3-dimercaptopropanol (BAL).

  19. Prelude to Gold

    Institute of Scientific and Technical Information of China (English)

    1996-01-01

    FEMALE Chinese athletes Fu Mingxia and Wang Junxia recorded outstanding performances at 1996 Atlanta Olympic Games. Fu Mingxia won gold medals in both platform and springboard diving, and in so doing became the first double medal winner in Olympic diving since 1960. Wang Junxia, the holder of several world records in women’s long distance events, struggled against the odds and captured gold in the 5,000-meter event,

  20. Gold nanoprobes for theranostics

    Science.gov (United States)

    Panchapakesan, Balaji; Book-Newell, Brittany; Sethu, Palaniappan; Rao, Madhusudhana; Irudayaraj, Joseph

    2011-01-01

    Gold nanoprobes have become attractive diagnostic and therapeutic agents in medicine and life sciences research owing to their reproducible synthesis with atomic level precision, unique physical and chemical properties, versatility of their morphologies, flexibility in functionalization, ease of targeting, efficiency in drug delivery and opportunities for multimodal therapy. This review highlights some of the recent advances and the potential for gold nanoprobes in theranostics. PMID:22122586

  1. The Gold Standard Programme

    DEFF Research Database (Denmark)

    Neumann, Tim; Rasmussen, Mette; Ghith, Nermin

    2013-01-01

    To evaluate the real-life effect of an evidence-based Gold Standard Programme (GSP) for smoking cessation interventions in disadvantaged patients and to identify modifiable factors that consistently produce the highest abstinence rates.......To evaluate the real-life effect of an evidence-based Gold Standard Programme (GSP) for smoking cessation interventions in disadvantaged patients and to identify modifiable factors that consistently produce the highest abstinence rates....

  2. Joining the Gold Rush

    Institute of Scientific and Technical Information of China (English)

    LIU BO

    2006-01-01

    @@ Flush with advanced technology and large amounts of capital, overseas mining firms are carving a place in the Chinese gold industry Dozens of Western mining companies, particularly those from Canada, are making the journey into the kind of remote corners in China that other overseas investors shy away from. What are they looking for? The answer is one of the most precious substances on the planet: gold.

  3. Biodistribution of colloidal gold nanoparticles after intravenous administration: effect of particle size.

    Science.gov (United States)

    Sonavane, Ganeshchandra; Tomoda, Keishiro; Makino, Kimiko

    2008-10-15

    Purpose of the present research work was to evaluate the biological distribution of differently size gold nanoparticles (NP) up on intravenous administration in mice. Another objective was to study effect of particle size on biological distribution of gold NP to enable their diverse applications in nanotechnology. Gold NP of different particle sizes, mainly 15, 50, 100 and 200 nm, were synthesized by modifying citrate ion concentration. Synthesized gold nanoparticles were characterized by SEM and their size distribution was studied by particle size analyzer. Gold NP was suspended in sodium alginate solution (0.5%, w/v) and administered to mice (1g/kg, intravenously) [n=3]. After 24h of administration of gold NP, blood was collected under light ether anesthesia, mice were sacrificed by cervical dislocation and various tissues/organs were removed. The tissues were then washed with saline, homogenized and lysed with aqua regia. The determination of gold in samples was carried out quantitatively by inductively coupled plasma mass spectrometry (ICP-MS). SEM study revealed spherical morphology of gold NP with narrow particle size distribution. Biodistribution study revealed gold NPs of all sizes were mainly accumulated in organs like liver, lung and spleen. The accumulation of gold NP in various tissues was found to be depending on particle size. 15 nm gold NP revealed higher amount of gold and number of particles in all the tissues including blood, liver, lung, spleen, kidney, brain, heart, stomach. Interestingly, 15 and 50 nm gold NP were able to pass blood-brain barrier as evident from gold concentration in brain. Two-hundred nanometers gold NP showed very minute presence in organs including blood, brain, stomach and pancreas. The results revealed that tissue distribution of gold nanoparticles is size-dependent with the smallest 15 nm nanoparticles showing the most widespread organ distribution.

  4. Grafting of gold nanoparticles on polyethyleneterephthalate using dithiol interlayer

    Energy Technology Data Exchange (ETDEWEB)

    Reznickova, A., E-mail: alena.reznickova@vscht.cz [Department of Solid State Engineering, Institute of Chemical Technology Prague, 166 28 Prague 6 (Czech Republic); Kolska, Z. [Faculty of Science, J.E. Purkyně University, Usti nad Labem (Czech Republic); Zaruba, K. [Department of Analytical Chemistry, Institute of Chemical Technology Prague, Prague (Czech Republic); Svorcik, V. [Department of Solid State Engineering, Institute of Chemical Technology Prague, 166 28 Prague 6 (Czech Republic)

    2014-06-01

    Two different procedures of grafting of polyethyleneterephthalate (PET), modified by plasma treatment, with gold nanoparticles (nanospheres) are studied. In the first procedure the PET foil was grafted with biphenyl-4,4′-dithiol and subsequently with gold nanoparticles. In the second one the PET foil was grafted with gold nanoparticles previously coated by the same dithiol. X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and electrokinetic analysis were used for characterization of the polymer surface at different modification steps. Gold nanoparticles were characterized by ultraviolet–visible spectroscopy. The first procedure was found to be more effective. It was proved that the dithiol was chemically bonded to the surface of the plasma activated PET and it mediates subsequent grafting of the gold nanoparticles. - Highlights: • Two different techniques were used for coating of PET with gold nanoparticles. • Grafted GNPs were characterized by XPS, FTIR, UV–vis, zeta potential, AFM. • More effective coating is achieved by deposition of GNPs earlier grafted with thiol. • The studied structures may have potential application in electronics or biomedicine.

  5. Statistical gamma-ray emission of gold and its astrophysical implications

    Directory of Open Access Journals (Sweden)

    Giacoppo F.

    2014-03-01

    Full Text Available The properties of the excited states of gold isotopes were investigated at the Oslo Cyclotron Laboratory. This study is important for the understanding of neutron capture rates in astrophysical plasmas relevant for heavy element nucleosynthesys.

  6. Prolonged cholestasis and ductopenia following gold salt therapy.

    Science.gov (United States)

    Basset, Céline; Vadrot, Jacqueline; Denis, Jacques; Poupon, Joël; Zafrani, Elie Serge

    2003-04-01

    Hepatotoxicity, predominantly cholestatic, is a rare adverse effect of gold salt therapy, which usually completely resolves within a few months. We report the case of a female patient treated for rheumatoid arthritis, who had gold salt overdose, and in whom acute cholestatic hepatitis occurred three weeks after beginning of therapy. Evolution of gold concentration was followed in plasma and urine, as well as in cutaneous and liver dry tissue. Liver biopsy showed marked inflammatory changes of interlobular bile ducts that evolved towards ductopenia, which was responsible for prolonged cholestasis still present 15 months later. In addition, sialadenitis with sicca syndrome was noted six months after onset of the disease. The mechanism of hepatotoxicity was probably immunoallergic since liver lesions were associated with hypersensitivity syndrome including dermatitis and blood and tissue eosinophilia. This is the first report of gold salt hepatotoxicity with histological demonstration of cholangitis followed by ductopenia.

  7. Surface-modified gold nanoshells for enhanced cellular uptake.

    Science.gov (United States)

    Liang, Zhongshi; Liu, Yun; Li, Xiangyang; Wu, Qinge; Yu, Jiahui; Luo, Shufang; Lai, Lihui; Liu, Shunying

    2011-09-15

    Gold nanoshells have shown a great potential for use as agents in a wide variety of biomedical applications, and some of which require the delivery of large numbers of gold nanoshells onto or into the cells. Here, we develop a ready method to enhance the cellular uptake of gold nanoshells by modifying with meso-2,3-dimercaptosuccinic acid (DMSA). The quantifiable technique of inductively coupled plasma atomic emissions spectroscopy (ICP-AES) and transmission electron microscopy (TEM) were used to investigate the cellular uptake of unmodified and DMSA-modified gold nanoshells. Three cell lines (RAW 264.7, A549, and BEL-7402) were involved and the results indicated that the cellular uptake of the DMSA-modified gold nanoshells was obviously enhanced versus the unmodified gold nanoshells. The reason possibly lies in the nonspecific adsorption of serum protein on the DMSA-modified gold nanoshells (DMSA-GNs), which consequently enhanced the cellular uptake. As a continued effort, in vitro experiments with endocytic inhibitors suggested the DMSA-GNs internalized into cells via receptor-mediated endocytosis (RME) pathway. This study has provided a valuable insight into the effects of surface modification on cellular uptake of nanoparticles.

  8. Tamper indicating gold nanocup plasmonic films

    Energy Technology Data Exchange (ETDEWEB)

    DeVetter, Brent M.; Bernacki, Bruce E.; Bennett, Wendy D.; Schemer-Kohrn, Alan; Alvine, Kyle J.

    2017-02-13

    The spectral signature of nanoplasmonic films are both robust and tailorable with optical responses ranging from the visible to the near-infrared. We present the development of flexible, elastomeric nanoplasmonic films consisting of periodic arrays of gold nanocups as tamper indicating films. Gold nanocups have polarization-sensitive optical properties that may be manufactured into films that offer unique advantages for tamper indication. These flexible films can be made quickly and at low-cost using commercially available monodisperse polystyrene nanospheres through self-assembly followed by plasma etching, metal deposition, and lift-off from a sacrificial substrate. Polarization- and angle-dependent optical spectroscopic measurements were performed to characterize the fabricated films. Using polarization-sensitive hyperspectral imaging, we demonstrate how these films can be applied to tamper indication and counterfeit resistance applications.

  9. Tamper indicating gold nanocup plasmonic films

    Science.gov (United States)

    DeVetter, Brent M.; Bernacki, Bruce E.; Bennett, Wendy D.; Schemer-Kohrn, Alan; Alvine, Kyle J.

    2017-02-01

    The spectral signatures of nanoplasmonic films are both robust and tailorable with optical responses ranging from the visible to the near-infrared. We present the development of flexible, elastomeric nanoplasmonic films consisting of periodic arrays of gold nanocups as tamper indicating films. Gold nanocups have polarization-sensitive optical properties that may be manufactured into films that offer unique advantages for tamper indication. These flexible films can be made quickly and at low-cost using the commercially available monodisperse polystyrene nanospheres through self-assembly followed by plasma etching, metal deposition, and lift-off from a sacrificial substrate. The polarization- and angle-dependent optical spectroscopic measurements were performed to characterize the fabricated films. Using polarization-sensitive hyperspectral imaging, we demonstrate how these films can be applied to tamper indication and counterfeit resistance applications.

  10. GOLD IS EARNED FROM THE PRODUCTION OF THAI GOLD LEAF

    Directory of Open Access Journals (Sweden)

    Dirk Bax

    2010-06-01

    Full Text Available Thai people like to cover sacred objects or things dear to them with gold leaf.. Statues of Buddha are sometimes covered with so many layers of gold leaf that they become formless figures, that can hardly be recognized. Portraits of beloved ancestors, statues of elephants and grave tombs are often covered with gold leaf. If one considers the number of Thai people and the popularity of the habit, the amount of gold involved could be considerable.

  11. Detection of submonolayer oxygen-18 on a gold surface by nuclear reaction analysis

    Energy Technology Data Exchange (ETDEWEB)

    Wielunski, L.S.; Kenny, M.J.; Wieczorek, L. [Commonwealth Scientific and Industrial Research Organisation (CSIRO), Lindfield, NSW (Australia). Div. of Applied Physics

    1993-12-31

    A gold substrate is the preferred solid surface for formation of an organic self-assembled monolayer ( SAM ). Device fabrication process may require the gold film to be exposed to photolithographic processing and plasma treatment prior to molecular assembly. It has been observed that oxygen plasma treatment prevents the formation of SAMs; however, subsequent treatment with an argon plasma allows assembly of the organic monolayers. To understand the mechanisms involved, a plasma containing 98% {sup 18}O was used and the film surface was analysed using the {sup 18}O (p,{alpha}){sup 15}N nuclear reaction. 5 refs., 1 tab., 3 figs.

  12. Numerical Modeling of Plasma-Liner Formation and Implosion for the PLX- α Project

    Science.gov (United States)

    Cassibry, Jason; Samulyak, Roman; Schillo, Kevin; Shih, Wen; Hsu, Scott

    2016-10-01

    Numerical simulations of the propagation, merging, and implosion of supersonic plasma jets have been performed using the FronTier and smooth particle hydrodynamics (SPH) codes in support of the PLX- α project. The physics includes radiation, heat conduction using Braginskii thermal conductivities, ion viscosity, and tabular equations of state using LTE and non-LTE models. A parametric analysis provides scaling of peak ram pressure and Mach number vs. number of jets, initial density, initial jet velocity, and species including nitrogen, neon, argon, krypton, and xenon. Conical simulations of 6 and 7 jets support near-term experiments, which facilitate diagnostic access for assessing the quality of the liner during merge. Solid angle averaged and standard deviation of ram pressure and Mach number reveal the variation in these properties during formation and implosion. Spherical harmonic mode-number analysis of spherical slices of ram pressure at various radii and times provide a quantitative means to assess the evolution of liner non-uniformity. Supported by the ARPA-E ALPHA program.

  13. Chemistry for oncotheranostic gold nanoparticles.

    Science.gov (United States)

    Trouiller, Anne Juliette; Hebié, Seydou; El Bahhaj, Fatima; Napporn, Teko W; Bertrand, Philippe

    2015-06-24

    This review presents in a comprehensive ways the chemical methods used to functionalize gold nanoparticles with focus on anti-cancer applications. The review covers the parameters required for the synthesis gold nanoparticles with defined shapes and sizes, method for targeted delivery in tumours, and selected examples of anti-cancers compounds delivered with gold nanoparticles. A short survey of bioassays for oncology based on gold nanoparticles is also presented.

  14. ['Gold standard', not 'golden standard'

    NARCIS (Netherlands)

    Claassen, J.A.H.R.

    2005-01-01

    In medical literature, both 'gold standard' and 'golden standard' are employed to describe a reference test used for comparison with a novel method. The term 'gold standard' in its current sense in medical research was coined by Rudd in 1979, in reference to the monetary gold standard. In the same w

  15. ['Gold standard', not 'golden standard'

    NARCIS (Netherlands)

    Claassen, J.A.H.R.

    2005-01-01

    In medical literature, both 'gold standard' and 'golden standard' are employed to describe a reference test used for comparison with a novel method. The term 'gold standard' in its current sense in medical research was coined by Rudd in 1979, in reference to the monetary gold standard. In the same

  16. Digging for Gold

    Science.gov (United States)

    Waters, John K.

    2012-01-01

    In the case of higher education, the hills are more like mountains of data that "we're accumulating at a ferocious rate," according to Gerry McCartney, CIO of Purdue University (Indiana). "Every higher education institution has this data, but it just sits there like gold in the ground," complains McCartney. Big Data and the new tools people are…

  17. GOLD PRESSURE VESSEL SEAL

    Science.gov (United States)

    Smith, A.E.

    1963-11-26

    An improved seal between the piston and die member of a piston-cylinder type pressure vessel is presented. A layer of gold, of sufficient thickness to provide an interference fit between the piston and die member, is plated on the contacting surface of at least one of the members. (AEC)

  18. Gold Nanoparticle Microwave Synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Krantz, Kelsie E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Christian, Jonathan H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Coopersmith, Kaitlin [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Washington, II, Aaron L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Murph, Simona H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-07-27

    At the nanometer scale, numerous compounds display different properties than those found in bulk material that can prove useful in areas such as medicinal chemistry. Gold nanoparticles, for example, display promise in newly developed hyperthermia therapies for cancer treatment. Currently, gold nanoparticle synthesis is performed via the hot injection technique which has large variability in final particle size and a longer reaction time. One underdeveloped area by which these particles could be produced is through microwave synthesis. To initiate heating, microwaves agitate polar molecules creating a vibration that gives off the heat energy needed. Previous studies have used microwaves for gold nanoparticle synthesis; however, polar solvents were used that partially absorbed incident microwaves, leading to partial thermal heating of the sample rather than taking full advantage of the microwave to solely heat the gold nanoparticle precursors in a non-polar solution. Through this project, microwaves were utilized as the sole heat source, and non-polar solvents were used to explore the effects of microwave heating only as pertains to the precursor material. Our findings show that the use of non-polar solvents allows for more rapid heating as compared to polar solvents, and a reduction in reaction time from 10 minutes to 1 minute; this maximizes the efficiency of the reaction, and allows for reproducibility in the size/shape of the fabricated nanoparticles.

  19. Digging for Gold

    Science.gov (United States)

    Waters, John K.

    2012-01-01

    In the case of higher education, the hills are more like mountains of data that "we're accumulating at a ferocious rate," according to Gerry McCartney, CIO of Purdue University (Indiana). "Every higher education institution has this data, but it just sits there like gold in the ground," complains McCartney. Big Data and the new tools people are…

  20. Gold Nanoparticle Microwave Synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Krantz, Kelsie E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Christian, Jonathan H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Coopersmith, Kaitlin [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Washington, II, Aaron L. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Murph, Simona H. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-07-27

    At the nanometer scale, numerous compounds display different properties than those found in bulk material that can prove useful in areas such as medicinal chemistry. Gold nanoparticles, for example, display promise in newly developed hyperthermia therapies for cancer treatment. Currently, gold nanoparticle synthesis is performed via the hot injection technique which has large variability in final particle size and a longer reaction time. One underdeveloped area by which these particles could be produced is through microwave synthesis. To initiate heating, microwaves agitate polar molecules creating a vibration that gives off the heat energy needed. Previous studies have used microwaves for gold nanoparticle synthesis; however polar solvents were used that partially absorbed incident microwaves, leading to partial thermal heating of the sample rather than taking full advantage of the microwave to solely heat the gold nanoparticle precursors in a non-polar solution. Through this project, microwaves were utilized as the sole heat source, and non-polar solvents were used to explore the effects of microwave heating only as pertains to the precursor material. Our findings show that the use of non-polar solvents allows for more rapid heating as compared to polar solvents, a reduction in reaction time from 10 minutes to 1 minute, maximizes the efficiency of the reaction, and allows for reproducibility in the size/shape of the fabricated nanoparticles.

  1. Aiming for Gold

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Twenty-three years ago he claimed China’s first Olympic gold medal,with a win in the 50-meter pistol shooting competition.Now Xu Haifeng is leading the country’s modern pentathlon team in its bid for success at the Beijing Games

  2. Gold and gold working in Late Bronze Age Northern Greece

    Science.gov (United States)

    Vavelidis, M.; Andreou, S.

    2008-04-01

    Numerous objects of gold displaying an impressive variety of types and manufacturing techniques are known from the Late Bronze Age (LBA) contexts of Mycenaean Greece, but very little is known about the origin and processing of gold during the second millennium b.c. Ancient literature and recent research indicate that northern Greece is probably the richest gold-bearing region in Greece, and yet, very little evidence exists regarding the exploitation of its deposits and the production as well as use of gold in the area during prehistory. The unusual find of a group of small stone crucibles at the prehistoric settlement of Thessaloniki Toumba, one with visible traces of gold melting, proves local production and offers a rare opportunity to examine the process of on-site gold working. Furthermore, the comparison of the chemical composition of prehistoric artefacts from two settlements with those of gold deposits in their immediate areas supports the local extraction of gold and opens up the prospect for some of the Mycenaean gold to have originated in northern Greece. The scarcity of gold items in northern Greek LBA contexts may not represent the actual amount of gold produced and consumed, but could be a result of the local social attitudes towards the circulation and deposition of artefacts from precious metals.

  3. Melamine nanosensing with chondroitin sulfate-reduced gold nanoparticles.

    Science.gov (United States)

    Noh, Hwa Jung; Kim, Hyun-Seok; Cho, Seonho; Park, Youmie

    2013-12-01

    Gold nanoparticles were green-synthesized using a glycosaminoglycan, chondroitin sulfate, as the reducing agent by mixing Au3+ and chondroitin sulfate under heating. Chondroitin sulfate-reduced gold nanoparticles were characterized by UV-Vis spectrophotometry, high resolution transmission electron microscopy and atomic force microscopy. The yield of Au3+ to Au0 was measured as 80.1% by inductively coupled plasma-atomic emission spectroscopy. A mostly spherical shape, with an average diameter of 44.68 +/- 11.25 nm, was observed from the atomic force microscopy images. Using chondroitin sulfate-reduced gold nanoparticles, we developed a melamine nanosensor that provides a simplified method to detect melamine in infant formula. With an increase in the melamine concentration in the gold nanoparticle solution, the characteristic surface plasmon resonance band of gold nanoparticles at 530 nm decreased, whereas a new peak appeared at 620 nm. There was a linear relationship between the absorbance ratio (A620/A530) and the melamine concentration in the range of 0.1-10 microM. The practical use of the proposed method was verified by quantifying melamine spiked in real infant formula at concentrations as low as 12.6 ppb. The nanosensing of melamine using chondroitin sulfate-reduced gold nanoparticles can be a promising technique for quick on-site melamine screening of milk products.

  4. Spiky gold nanoshells.

    Science.gov (United States)

    Sanchez-Gaytan, Brenda L; Park, So-Jung

    2010-12-21

    We report a high-yield synthetic method for a new type of metal nanostructure, spiky gold nanoshells, which combine the morphological characteristics of hollow metal nanoshells and nanorods. Our method utilizes block copolymer assemblies and polymer beads as templates for the growth of spiky nanoshells. Various shapes of spiky metal nanoshells were prepared in addition to spherical nanoshells by using block copolymer assemblies such as rod-like micelles, vesicles, and bilayers as templates. Furthermore, spiky gold shells encapsulating magnetic nanoparticles or quantum dots were prepared based on the ability of block copolymers to self-assemble with various types of nanoparticles and molecules. The capability to encapsulate other materials in the core, the shape tunability, and the highly structured surface of spiky nanoshells should benefit a range of imaging, sensing, and medical applications of metal nanostructures.

  5. Gold induced apoptsis study

    DEFF Research Database (Denmark)

    Laustsen, Christoffer

    2008-01-01

    at the moment, especially in the fields of lasers, they though have some problems concerning the placement of the tumor in the human body. Local heating by MR has tremendous advance in comparison too lasers. The first step is to validate the hypothesis of the inductive heating of the gold nano particles trough......Introduction   Cancer cells are highly thermo sensitive. On the basis of an article in Nature the idea arose, for a new non-invasive thermotherapy technique, based on radio frequency inductive heating of nano gold particles in an MR-scanner. Thermotherapy is getting considerably attention...... the low energy radio frequencies. If the method is demonstrated to be feasible, next step is testing in cell line trials.   Confocal microscopy experiments on cells are very hard to do reliable and reproducible statistic on, due to the fact that that it’s user counting which makes the data. Automatic...

  6. Non-LTE Luminosity and Abundance Diagnostics of Classical Novae in X-rays

    CERN Document Server

    Németh, Péter

    2013-01-01

    Classical novae are significant sources of interstellar material, especially carbon, nitrogen and oxygen. These standard candles are only behind supernovae and $\\gamma$-ray bursts as the third brightest objects in the sky, and the most probable progenitors of type Ia supernovae. After a nova outburst the system enters into the constant bolometric luminosity phase and the nova maintains a stable hydrogen burning in the surface layers of the white dwarf. As the expanding shell around the nova attenuates, progressively deeper and hotter layers become visible. At the end of the constant bolometric luminosity phase, the hottest layers are exposed and novae radiate X-rays. This work uses the static, plane-parallel model atmosphere code TLUSTY to calculate atmospheric structure and SYNSPEC to calculate synthetic X-ray spectra. It was necessary to incorporate atomic data for the highest ionization stages of elements ranging from hydrogen to iron in both programs. Atomic data on energy levels, bound-free, bound-bound ...

  7. A spherical, non-LTE, blanketed model stellar atmosphere for Phi CAS (FOIa)

    Science.gov (United States)

    Rosenzweig, Patricia

    By constructing a model atmosphere, the theoretical energy distribution of the emergent radiation that best matches the observed energy distribution of the star Phi Cassiopeiae is calculated; its effective temperature and surface gravity are thus derived. In order to use the pair method to derive the extinction curve for NGC 457 of which Phi Cas is a member, a new method is developed for choosing a lightly reddened comparison star, which consists of matching the equivalent widths of spectral features that are particularly strong and sensitive to temperature and luminosity. The intrinsic energy distribution of Phi Cas was determined from 1500 to 5800 A. A detailed new spherical model atmosphere was constructed. The equation of transfer was solved with the constraints of hydrostatic and pure radiative equilibrium. The statistical equilibrium of 10 to the 6th transitions was treated. Several tests have demonstrated this model to be reliable. Results imply a mass of 6.3 + or - 3.6 solar masses, which agrees with the mass of the main-sequence turnoff of NGC 457.

  8. STUDYING THE PHYSICAL CONDITIONS IN BE STAR DISKS USING NON-LTE RADIATIVE TRANSFER CODES

    Directory of Open Access Journals (Sweden)

    R. J. Halonen

    2010-01-01

    Full Text Available Las estrellas Be Clasicas son rotadores rÁpidos, estrellas masivas que exhiben varias caracterÍsticas observacionales distintas debido a la presencia de discos delgados de gas concentrados en el plano ecuatorial de la estrella. Para entender el mecanismo que gobierna el desarrollo de estos discos circunestelares, utilizamos códigos computacionales para crear modelos teóricos para estos objetos y su entorno y los comparamos con las observaciones de estrellas Be. El primer objetivo de este trabajo es la comparación de diferentes acercamientos usados en la creación de modelos teóricos de estrellas Be. Examinamos desarrollos independientes de códigos de equilibrio termodinámico no-local (N-ETL dise~nados para modelar ambientes circunestelares que resuelven simultáneamente los problemas de transporte radiativo, equilibrio térmico y equilibrio estadístico. Un análisis detallado de las diferencias y similitudes entre diferentes técnicas de transferencia radiativa puede proporcionar una valiosa comprensión acerca de los fenómenos físicos que gobiernan el desarrollo de los discos circunestelares de estrellas Be.

  9. A computer program for fast non-LTE analysis of interstellar line spectra

    NARCIS (Netherlands)

    Tak, Floris van der; Black, John; Schoeier, Fredrik; Jansen, David; Dishoeck, Ewine van

    2007-01-01

    Abstract: The large quantity and high quality of modern radio and infrared line observations require efficient modeling techniques to infer physical and chemical parameters such as temperature, density, and molecular abundances. We present a computer program to calculate the intensities of atomic

  10. Numerical methods for non-LTE line radiative transfer: Performance and convergence characteristics

    OpenAIRE

    Zadelhoff, van, G.-J.; Dullemond, C.P.; Tak, van der, C.; Yates, J. A.; Doty, S. D.; Ossenkopf, V.; Hogerheijde, M. R.; Juvela, M.; Wiesemeyer, H.; Schöier, F.L.

    2002-01-01

    Comparison is made between a number of independent computer programs for radiative transfer in molecular rotational lines. The test models are spherically symmetric circumstellar envelopes with a given density and temperature profile. The first two test models have a simple power law density distribution, constant temperature and a fictive 2-level molecule, while the other two test models consist of an inside-out collapsing envelope observed in rotational transitions of HCO+. For the 2-level ...

  11. Film Ace Takes Gold

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    "Really, I never, never expected to win this," said Chinese director Jia Zhangke on hearing he had taken the top award for his movie Still Life (Sanxia Haoren) at the Venice Film Festival, on September 9. A surprise late entry, Still Life quickly emerged as the favorite and the Gold Lion was again hugged by Chinese. The well-known Chinese director Zhang Yimou won the same award back in 1999, for Not One Less-also a

  12. JUNK: rubbish to gold

    OpenAIRE

    Hanson, Maria

    2015-01-01

    JUNK: rubbish to gold is a playful exploration of community economies (exchange, giving, bartering, gathering, earning, harvesting); putting on display the process of creating the ‘work of art’. Co-created and co-curated by Jivan Astfalck, Laura Bradshaw-Heap and Rachel Darbourne and partnered with charities, who supplied JUNK jewellery. During a public performance 31 jewellers ‘gifted’ their skills, (re)constructing pieces selected from a mountain of JUNK creating reimagined artworks for the...

  13. Rushing for gold

    DEFF Research Database (Denmark)

    Jønsson, Jesper Bosse; Bryceson, Deborah Fahy

    2009-01-01

    African rural dwellers have faced depressed economic prospects for several decades. Now, in a number of mineral-rich countries, multiple discoveries of gold and precious stones have attracted large numbers of prospective small-scale miners. While their 'rush' to, and activities within, mining sit...... affluent than the others, suggesting that movement can be rewarding for those willing to 'try their luck' with the hard work and social networking demands of mining another site....

  14. Gold-gold junction electrodes:the disconnection method.

    Science.gov (United States)

    Dale, Sara E C; Vuorema, Anne; Ashmore, Ellen M Y; Kasprzyk-Horden, Barbara; Sillanpää, Mika; Denuault, Guy; Marken, Frank

    2012-02-01

    The formation of gold-gold junction electrodes for application in electroanalysis is described here based on electro-deposition from a non-cyanide gold plating bath. Converging growth of two hemispherical gold deposits on two adjacent platinum microelectrodes (both 100 µm diameter in glass, ca. 45 µm gap) followed by careful etching in aqueous chloride solution was employed. During growth both gold hemispheres "connect" and during etching "disconnection" is evident in a drop in current. Gold-gold junctions with sub-micron gaps are formed and applied for the electroanalytical detection of sub-micromolar concentrations of hydroquinone in 0.1 M phosphate buffer pH 7 (E(rev) = 0.04 V vs. SCE) and sub-micromolar concentration of dopamine in 0.1 M phosphate buffer pH 7 (E(rev) = 0.14 V vs. SCE). The potential future uses in analysis and limitations of gold-gold junction electrodes are discussed.

  15. Green Synthesis of Gold Nanoparticles

    Directory of Open Access Journals (Sweden)

    Hamid Reza Ghorbani

    2015-03-01

    Full Text Available There is an increased interest in understanding the toxicity and rational design of gold nanoparticles for biomedical applications in recent years. In this study gold nanoparticles were synthesized using dextrose as a reducing agent. The gold nanoparticles displayed characteristic Surface Plasmon Resonance peak at around 550 nm having a mean particle size of 75±30 nm. In order to identify and analyze nanoparticles, UV–Vis spectroscopy, Scanning electron microscopy (SEM, and dynamic light scattering (DLS were used.

  16. Distribution pattern of inhaled ultrafine gold particles in the rat lung.

    Science.gov (United States)

    Takenaka, S; Karg, E; Kreyling, W G; Lentner, B; Möller, W; Behnke-Semmler, M; Jennen, L; Walch, A; Michalke, B; Schramel, P; Heyder, J; Schulz, H

    2006-09-01

    The role of alveolar macrophages in the fate of ultrafine particles in the lung was investigated. Male Wistar-Kyoto rats were exposed to ultrafine gold particles, generated by a spark generator, for 6 h at a concentration of 88 microg/m3 (4 x 10(6)/cm3, 16 nm modal mobility diameter). Up to 7 days, the animals were serially sacrificed, and lavaged cells and lung tissues were examined by transmission electron microscopy. The gold concentration/content in the lung, lavage fluid, and blood was estimated by inductively coupled plasma-mass spectrometry. Gold particles used were spherical and electron dense with diameters of 5-8 nm. The particles were individual or slightly agglomerated. By inductively coupled plasma-mass spectrometry analysis of the lung, 1945 +/- 57 ng (mean +/- SD) and 1512 +/- 184 ng of gold were detected on day 0 and on day 7, respectively, indicating that a large portion of the deposited gold particles was retained in the lung tissue. In the lavage fluid, 573 +/- 67 ng and 96 +/- 29 ng were found on day 0 and day 7, respectively, which means that 29% and 6% of the retained gold particles were lavageable on these days. A low but significant increase of gold (0.03 to 0.06% of lung concentration) was found in the blood. Small vesicles containing gold particles were found in the cytoplasm of alveolar macrophages. In the alveolar septum, the gold particles were enclosed in vesicles observed in the cytoplasm of alveolar type I epithelial cells. These results indicate that inhaled ultrafine gold particles in alveolar macrophages and type I epithelial cells are processed by endocytotic pathways, though the uptake of the gold particles by alveolar macrophages is limited. To a low degree, systemic particle translocation took place.

  17. The extractive metallurgy of gold

    Science.gov (United States)

    Kongolo, K.; Mwema, M. D.

    1998-12-01

    Mössbauer spectroscopy has been successfully used in investigation of the gold compounds present in ores and the gold species which occur during the process metallurgy of this metal. This paper is a survey of the basic recovery methods and techniques used in extractive metallurgy of gold. Process fundamentals on mineral processing, ore leaching, zinc dust cementation, adsorption on activated carbon, electrowinning and refining are examined. The recovery of gold as a by-product of the copper industry is also described. Alternative processing methods are indicated in order to shed light on new interesting research topics where Mössbauer spectroscopy could be applied.

  18. Turning lead into gold

    DEFF Research Database (Denmark)

    Jensen, Steffen Moltrup Ernø

    For years the field of entrepreneurship has been blinded by the alchemical promise of turning lead into gold, of finding the ones most likely to become the next Branson, Zuckerberg or Gates. The promise has been created in the midst of political and scientific agendas where certain individuals...... is not to accumulate state or market wealth, but for entrepreneurial skills to become tools towards the liberation of the individual from oppressive systems of control – essentially to add public value rather than economic value. In this presentation I will sketch an anarchist perspective on entrepreneurship, looking...

  19. On- and off-axis spectral emission features from laser-produced gas breakdown plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Harilal, S. S.; Skrodzki, P. J.; Miloshevsky, A.; Brumfield, B. E.; Phillips, M. C.; Miloshevsky, G.

    2017-06-01

    time with an early time temperatures and densities in excess of 35000 K and 4×1018 /cm3 with an existence of thermal equilibrium. However, the emission from the off-kernel positions from the breakdown plasmas showed enhanced ultraviolet radiation with the presence of N2 bands and represented by non-LTE conditions. Our results also highlight that the ultraviolet radiation emitted during early time of spark evolution is the predominant source of the photo-excitation of the surrounding medium.

  20. Characterization and treatment of artisanal gold mine tailings.

    Science.gov (United States)

    de Andrade Lima, L R P; Bernardez, L A; Barbosa, L A D

    2008-02-11

    The solid waste generated by artisanal gold mining, with high mercury and gold contents, can be found in several areas in the South America. The present study focused on the tailings of an artisanal gold mine area located in the Brazilian northeastern. Samples of the mine tailings were taken and used to perform a physical and chemical characterization study using X-ray diffraction, scanning electron microscopy, neutron activation, X-ray fluorescence, induced coupled plasma-mass spectrometry, among others analytical methods. The results indicate that the material is composed mainly by quartz and goethite, the characteristic size of the particles (d(50)) is about 150 microm, and the density is close of that of quartz. The main constituents are silicon, iron, and aluminum. The tailings gold content is of about 1.8 mg/kg and the mercury content is of about 10 mg/kg. A remarkable feature of this solid waste is that the gold and mercury are both concentrated in both the fine and the coarse particles, but not in particles of intermediary size. Leaching studies indicated that the tailings are stable in weak organic acids, but soluble in alkaline and aired cyanide solutions, in which 89% of gold and 100% of mercury are extracted in 24 h. Electroleaching experiments, performed using sodium chloride as electrolyte, indicated that mercury and gold are extracted simultaneously and the recovery of both metals can be as high as 70% in 4 h. In addition, chromium, nickel, and lead are found in relatively large amounts in the solution, which indicate an effectively action of the electroleaching method to clean up solid wastes contaminated with metals.

  1. Influence of gold nanoparticles on platelets functional activity in vitro

    Science.gov (United States)

    Akchurin, Garif G.; Akchurin, George G.; Ivanov, Alexey N.; Kirichuk, Vyacheslav F.; Terentyuk, George S.; Khlebtsov, Boris N.; Khlebtsov, Nikolay G.

    2008-02-01

    Now in the leading biomedical centers of the world approved new technology of laser photothermal destruction of cancer cells using plasmon gold nanoparticles. Investigations of influence of gold nanoparticles on white rat platelets aggregative activity in vitro have been made. Platelet aggregation was investigated in platelet rich plasma (PRP) with help of laser analyzer 230 LA >, Russia). Aggregation inductor was ADP solution in terminal concentration 2.5 micromole (>, Russia). Gold nanoshells soluted in salt solution were used for experiments. Samples of PRP were incubated with 50 or 100 μl gold nanoshells solution in 5 minute, after that we made definition ADP induced platelet aggregation. We found out increase platelet function activity after incubation with nanoparticles solution which shown in maximum ADP-induced aggregation degree increase. Increase platelet function activity during intravenous nanoshells injection can be cause of thrombosis on patients. That's why before clinical application of cancer cell destruction based on laser photothermal used with plasmon gold nanoparticles careful investigations of thrombosis process and detail analyze of physiological blood parameters are very necessary.

  2. Gold electrodes from recordable CDs

    Science.gov (United States)

    Angnes; Richter; Augelli; Kume

    2000-11-01

    Gold electrodes are widely used in electrochemistry and electroanalytical chemistry. The notable performance when used in stripping analysis of many ionic species and the extraordinary affinity of thio compounds for its surface make these electrodes very suitable for many applications. This paper reports a simple and novel way to construct gold electrodes (CDtrodes) using recordable CDs as the gold source. The nanometer thickness of the gold layer of recordable disks (50-100 nm) favors the construction of band nanoelectrodes with areas as small as 10(-6) cm2. The plane surface can be easily used for the construction of conventional-sized gold electrodes for batch or flow injection analysis or even to obtain electrodes as large as 100 cm2. The low price of commercial recordable CDs allows a "one way use". The evaluation and applicability of these electrodes in the form of nanoelectrodes, in batch and associated with flow cells, are illustrated in this paper.

  3. Concise review: no breakthroughs for human mesenchymal and embryonic stem cell culture: conditioned medium, feeder layer, or feeder-free; medium with fetal calf serum, human serum, or enriched plasma; serum-free, serum replacement nonconditioned medium, or ad hoc formula? All that glitters is not gold!

    Science.gov (United States)

    Mannello, Ferdinando; Tonti, Gaetana A

    2007-07-01

    The choice of an optimal strategy of stem cell culture is at the moment an impossible task, and the elaboration of a culture medium adapted to the production of embryonic and adult mesenchymal stem cells for the clinical application of cell therapy remains a crucial matter. To make an informed choice, it is crucial to not underestimate the theoretical health risk of using xenogenic compounds, to limit the immunological reactions once stem cells are transplanted, to not overestimate the controversial results obtained with human serum, plasma, and blood derivatives, as well as to carefully examine the pros and cons of serum-free and ad hoc formulation strategies; besides that, to also maintain multipotentiality, self-renewal, and transplantability. The extent to which we are able to achieve effective cell therapies will depend on assimilating a rapidly developing base of scientific knowledge with the practical considerations of design, delivery, and host response. Although clinical studies have already started, many questions remain unsolved, and concomitantly even more evidence on suitable and safe off-the-shelf products (mainly xeno-free) for embryonic and mesenchymal stem cells is cropping up, even though there should be no rush to enter the clinical stage while the underlying basic research is still not so solid; this solely will lead to high-quality translational research, without making blunders stemming from the assumption that all that glitters is not gold. Disclosure of potential conflicts of interest is found at the end of this article.

  4. Exciting first results from deuteron-gold collisions at Brookhaven

    CERN Multimedia

    2003-01-01

    "The latest results from the Relativistic Heavy Ion Collider, the world's most powerful facility for nuclear physics research, strengthen scientists' confidence that RHIC collisions of gold ions have created unusual conditions and that they are on the right path to discover a form of matter called the quark-gluon plasma, believed to have existed in the first microseconds after the birth of the universe" (1 page).

  5. Surface Attachment of Gold Nanoparticles Guided by Block Copolymer Micellar Films and Its Application in Silicon Etching

    Directory of Open Access Journals (Sweden)

    Mingjie Wei

    2015-06-01

    Full Text Available Patterning metallic nanoparticles on substrate surfaces is important in a number of applications. However, it remains challenging to fabricate such patterned nanoparticles with easily controlled structural parameters, including particle sizes and densities, from simple methods. We report on a new route to directly pattern pre-formed gold nanoparticles with different diameters on block copolymer micellar monolayers coated on silicon substrates. Due to the synergetic effect of complexation and electrostatic interactions between the micellar cores and the gold particles, incubating the copolymer-coated silicon in a gold nanoparticles suspension leads to a monolayer of gold particles attached on the coated silicon. The intermediate micellar film was then removed using oxygen plasma treatment, allowing the direct contact of the gold particles with the Si substrate. We further demonstrate that the gold nanoparticles can serve as catalysts for the localized etching of the silicon substrate, resulting in nanoporous Si with a top layer of straight pores.

  6. Surface plasmons in porous gold films

    Science.gov (United States)

    Rudenko, S. P.; Stetsenko, M. O.; Krishchenko, I. M.; Maksimenko, L. S.; Kaganovich, E. B.; Serdega, B. K.

    2016-04-01

    The surface plasmon resonance effects in porous gold (por-Au) films—nanocomposite porous films containing an ensemble of disordered gold nanoparticles—have been investigated by modulation-polarization spectroscopy. Por-Au films have been obtained by pulsed laser deposition (using a direct particle flow from an erosion torch formed by a YAG:Nd3+ laser in argon). The spectral and angular dependences of the polarization difference ρ(λ, θ) of internal-reflection coefficients of s- and p-polarized radiation in the Kretschmann geometry and the spectral dependences of isotropic reflection angles at ρ(θ) = 0 are measured. Two types of surface plasmon resonance are found: one occurs on isolated nanoparticles (dipole and multipole modes), and the other is due to the dipole-dipole interaction of neighboring nanoparticles. The frequency of electron plasma oscillations for the nanoparticle ensemble and the frequencies and decay parameters of resonances are determined. Dispersion relations for the radiative and nonradiative modes are presented. The negative sign of the dispersion branch of nonradiative modes of dipole-dipole interaction is explained by the spatial dispersion of permittivity. The relationships between the formation conditions of the films, their structure, and established resonance parameters (determining the resonant-optical properties of films) are discussed.

  7. Directed Assembly of Gold Nanoparticles

    DEFF Research Database (Denmark)

    Westerlund, Axel Rune Fredrik; Bjørnholm, Thomas

    2009-01-01

    As a complement to common "top-down" lithography techniques, "bottom-up" assembly techniques are emerging as promising tools to build nanoscale structures in a predictable way. Gold nanoparticles that are stable and relatively easy to synthesize are important building blocks in many such structures...... due to their useful optical and electronic properties. Programmed assembly of gold nanoparticles in one, two, and three dimensions is therefore of large interest. This review focuses on the progress from the last three years in the field of directed gold nanoparticle and nanorod assembly using...

  8. GOLD and the fixed ratio

    Directory of Open Access Journals (Sweden)

    Vestbo J

    2012-09-01

    Full Text Available Jørgen VestboUniversity of Manchester, Manchester, UKI read with interest the paper entitled "Diagnosis of airway obstruction in the elderly: contribution of the SARA study" by Sorino et al in a recent issue of this journal.1 Being involved in the Global Initiative for Obstructive Lung Diseases (GOLD, it is nice to see the interest sparked by the GOLD strategy document. However, in the paper by Sorino et al, there are a few misunderstandings around GOLD and the fixed ratio (forced expiratory volume in 1 second/forced volume vital capacity < 0.70 that need clarification.View original paper by Sorino and colleagues.

  9. Quantitation of metal content in the silver-assisted growth of gold nanorods.

    Science.gov (United States)

    Orendorff, Christopher J; Murphy, Catherine J

    2006-03-09

    The seed-mediated approach to making gold nanorods in aqueous surfactant solutions has become tremendously popular in recent years. Unlike the use of strong chemical reductants to make spherical gold nanoparticles, the growth of gold nanorods requires weak reducing conditions, leading to an unknown degree of gold reduction. The metal content of gold nanorods, made in high yield in the presence of silver ion, is determined by inductively coupled plasma atomic emission spectroscopy. Through the use of the known gold concentration in nanorods, molar extinction coefficients are calculated for nanorods of varying aspect ratios from 2.0 to 4.5. The extinction coefficients at the longitudinal plasmon band peak maxima for these nanorods vary from 2.5x10(9) to 5.5x10(9) M-1 cm-1, respectively, on a per-particle basis. Many of the gold ions present in the growth solution remain unreacted; insights into the growth mechanism of gold nanorods are discussed.

  10. Determination of gold,platinum and palladium in geological samples by inductively coupled plasma mass spectrometry after concentration with 717 anion exchange resin%717阴离子交换树脂富集-电感耦合等离子体质谱法测定地质样品中痕量金铂钯

    Institute of Scientific and Technical Information of China (English)

    李丹; 王锝; 李彪

    2011-01-01

    The adsorption property and separation conditions of 717 anion exchange resin to trace gold,platinum and palladium in geological samples were studied. The sample was dissolved with HCl+ aqua regia under heating in water bath. Only Mo in dissolved elements had interference with the determination of Pd, which could be eliminated using mathematical formula correction. When the flow rate of eluent was 2 mL/min, the enrichment effects of gold, platinum and palladium in 5 % HCl medium reached its best, and the recoveries were close to 100 %. After correcting the influence of coexisting ions, the national first-class certified reference materials were determined by inductively coupled plasma mass spectrometry, and the difference between determination results and certified values was satisfactory. The detection limit of method were 0. 6 ng/mL, 0. 5 ng/mL and 0. 7 ng/mL for Pd, Pt and Au, respectively. Five random geological samples were analyzed by this method in comparison with NiS fire assay-ICP-MS method. The determination results were consistent. The results of two methods were checked by double sample's variance F test, and there was no significant difference.%研究了717型阴离子交换树脂对地质样品中痕量金、铂、钯的吸附性能及分离条件.采用水浴加热,HCl+王水的方式溶解样品,溶出的干扰元素只有Mo对Pd的测定造成干扰,采用数学公式校正可消除此干扰.在5%的HCl介质中,洗脱剂流速为2 mL/min时,金、铂、钯的富集效果最佳,回收率接近100%.经对共存离子影响的校正,用电感耦合等离子体质谱法测定国家一级标准物质,其结果较认定值不超差.方法检出限为Pd 0.6 ng/mL,Pt 0.5ng/mL,Au 0.7ng/mL.随机选取5个地质样品用本法进行分析,同时与硫镍试金-ICP-MS法进行比较,结果一致.两组结果经双样本方差F检验,无显著性差异.

  11. 41 CFR 101-45.002 - Gold.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 2 2010-07-01 2010-07-01 true Gold. 101-45.002 Section... PERSONAL PROPERTY § 101-45.002 Gold. (a) Gold will be sold in accordance with this section and part 102-38 of the Federal Management Regulation. (b) Sales of gold shall be processed to— (1) Use the sealed bid...

  12. 20th-Century Gold Rush.

    Science.gov (United States)

    Wargo, Joseph G.

    1992-01-01

    Presents Nevada's gold rush activities spurred by technological advancements in search methods. Describes the events that led to the twentieth-century gold rush, the techniques for finding deposits and the geological formation process of disseminated gold deposits. Vignettes present the gold extraction process, cross-section, and profile of a…

  13. Protein-mediated autoreduction of gold salts to gold nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Basu, Nivedita; Bhattacharya, Resham; Mukherjee, Priyabrata [Department of Biochemistry and Molecular Biology, College of Medicine, Mayo Clinic, Rochester, MN 55905 (United States)], E-mail: Mukherjee.Priyabrata@mayo.edu

    2008-09-01

    Here we report for the first time that proteins can function as unique reducing agents to produce gold nanoparticles from gold salts. We demonstrate that three different proteins, namely, bovine serum albumin (BSA), Rituximab (RIT-an anti-CD20 antibody) and Cetuximab (C225-anti-EGFR antibody), reduce gold salts to gold nanoparticles (GNP). Interestingly, among all the three proteins tested, only BSA can reduce gold salts to gold nanotriangles (GNT). BSA-induced formation of GNT can be controlled by carefully selecting the reaction condition. Heating or using excess of ascorbic acid (AA) as additional reducing agent shifts the reaction towards the formation of GNP with flower-like morphology, whereas slowing down the reaction either by cooling or by adding small amount of AA directs the synthesis towards GNT formation. GNT is formed only at pH 3; higher pHs (pH 7 and pH 10) did not produce any nanoparticles, suggesting the involvement of specific protein conformation in GNT formation. The nanomaterials formed by this method were characterized using UV-visible (UV-vis) spectroscopy and transmission electron microscopy (TEM). This is an important finding that will have uses in various nanotechnological applications, particularly in the green synthesis of novel nanomaterials based on protein structure.

  14. Metallic gold beads in hyaluronic acid

    DEFF Research Database (Denmark)

    Pedersen, Dan Sonne; Tran, Thao Phuong; Smidt, Kamille;

    2013-01-01

    by exploiting macrophage-induced liberation of gold ions (dissolucytosis) from gold surfaces. Injecting gold beads in hyaluronic acid (HA) as a vehicle into the cavities of the brain can delay clinical signs of disease progression in the MS model, experimental autoimmune encephalitis (EAE). This study....... In conclusion, our findings support that bio-liberation of gold from metallic gold surfaces have anti-inflammatory properties similar to classic gold compounds, warranting further studies into the pharmacological potential of this novel gold-treatment and the possible synergistic effects of hyaluronic acid....

  15. Gold-Catalyzed Synthesis of Heterocycles

    Science.gov (United States)

    Arcadi, Antonio

    2014-04-01

    The following sections are included: * Introduction * Synthesis of Heterocycles via Gold-Catalyzed Heteroatom Addition to Unsaturated C-C Bonds * Synthesis of Heterocyclic Derivatives through Gold-Catalyzed Cyclization of Polyunsaturated Compounds * Synthesis of Heterocyclic Compounds via α-Oxo Gold Carbenoid * Synthesis of Heterocyclic Derivatives through Gold-Catalyzed Cycloaddition Reactions * Synthesis of Heterocyclic Derivatives through Gold-Catalyzed Activation of Carbonyl Groups and Alcohols * Synthesis of Heterocyclic Compounds through Gold-Mediated C-H Bond Functionalization * Gold-Catalyzed Domino Cyclization/Oxidative Coupling Reactions * Conclusions * References

  16. Gold island fiber optic sensor

    Science.gov (United States)

    Meriaudeau, Fabrice; Wig, A. G.; Passian, A.; Downey, Todd R.; Buncick, Milan; Ferrell, Trinidad L.

    1999-12-01

    A fiber optic chemical sensor based on gold-island surface plasmon excitation is presented. The sensing part of the fiber is the end of the fiber onto which a thin layer of gold has been deposited to form a particulate surface. Annealing the gold reshapes the particles and produces an optical absorbance near 535 nm with the fiber in air. The optical absorption resonance of the gold particles is shifted if the fiber is immersed in a medium other than air. These resonance shifts are examined by transmission spectroscopy through the fiber. Experimental results for the sensitivity and dynamic range in the measurement of liquid solutions are in agreement with a basic theoretical model which characterizes the surface plasmon using nonretarded electrodynamics.

  17. Biomass processing over gold catalysts

    CERN Document Server

    Simakova, Olga A; Murzin, Dmitry Yu

    2014-01-01

    The book describes the valorization of biomass-derived compounds over gold catalysts. Since biomass is a rich renewable feedstock for diverse platform molecules, including those currently derived from petroleum, the interest in various transformation routes has become intense. Catalytic conversion of biomass is one of the main approaches to improving the economic viability of biorefineries.  In addition, Gold catalysts were found to have outstanding activity and selectivity in many key reactions. This book collects information about transformations of the most promising and important compounds derived from cellulose, hemicelluloses, and woody biomass extractives. Since gold catalysts possess high stability under oxidative conditions, selective oxidation reactions were discussed more thoroughly than other critical reactions such as partial hydrogenation, acetalization, and isomerization. The influence of reaction conditions, the role of the catalyst, and the advantages and disadvantages of using gold are pre...

  18. Gold, currencies and market efficiency

    Science.gov (United States)

    Kristoufek, Ladislav; Vosvrda, Miloslav

    2016-05-01

    Gold and currency markets form a unique pair with specific interactions and dynamics. We focus on the efficiency ranking of gold markets with respect to the currency of purchase. By utilizing the Efficiency Index (EI) based on fractal dimension, approximate entropy and long-term memory on a wide portfolio of 142 gold price series for different currencies, we construct the efficiency ranking based on the extended EI methodology we provide. Rather unexpected results are uncovered as the gold prices in major currencies lay among the least efficient ones whereas very minor currencies are among the most efficient ones. We argue that such counterintuitive results can be partly attributed to a unique period of examination (2011-2014) characteristic by quantitative easing and rather unorthodox monetary policies together with the investigated illegal collusion of major foreign exchange market participants, as well as some other factors discussed in some detail.

  19. Gold, coal and oil.

    Science.gov (United States)

    Dani, Sergio U

    2010-03-01

    Jared Diamond has hypothesized that guns, germs and steel account for the fate of human societies. Here I propose an extension of Diamond's hypothesis and put it in other terms and dimensions: gold, coal and oil account not only for the fate of human societies but also for the fate of mankind through the bodily accumulation of anthropogenic arsenic, an invisible weapon of mass extinction and evolutionary change. The background is clear; arsenic species fulfill seven criteria for a weapon of mass extinction and evolutionary change: (i) bioavailability to all living organisms; (ii) imperceptibility; (iii) acute toxicity; (iv) bioaccumulation and chronic toxicity; (v) adverse impact on reproductive fitness and reproductive outcomes and early-age development and growth in a wide range of microbial, plant and animal species including man; (vi) widespread geographical distribution, mobility and ecological persistence on a centennial to millennial basis and (vii) availability in necessary and sufficient amounts to exert evolutionarily meaningful effects. The proof is becoming increasingly feasible as human exploitation of gold, coal and oil deposits cause sustainable rises of arsenic concentrations in the biosphere. Paradoxically, humans are among the least arsenic-resistant organisms because humans are long-lived, encephalized and complex social metazoans. An arsenic accumulation model is presented here to describe how arsenic accumulates in the human body with increasing age and at different provisionally safe exposure levels. Arsenic accumulates in the human body even at daily exposure levels which are within the lowest possible WHO provisional tolerance limits, yielding bodily arsenic concentrations which are above WHO provisional limits. Ongoing consequences of global scale arsenic poisoning of mankind include age-specific rises in morbidity and mortality followed by adaptive changes. The potential rise of successful forms of inborn resistance to arsenic in humans

  20. Gold-catalyzed domino reactions.

    Science.gov (United States)

    Michelet, Véronique

    2015-01-01

    Gold-catalyzed reactions have appeared to be highly attractive tools for chemists to promote novel transformations to prepare elaborated structures from simple starting materials. This chapter presents selected and original examples of domino processes in the presence of gold catalysts, highlighting reports implying hydration, hydroxylation, and hydroamination as key starting point for cascade transformations. Domino processes implying 1,n-enynes, asymmetric domino transformations, and applications of all the presented processes in total synthesis are presented.

  1. Fabrication of disposable topographic silicon oxide from sawtoothed patterns: control of arrays of gold nanoparticles.

    Science.gov (United States)

    Cho, Heesook; Yoo, Hana; Park, Soojin

    2010-05-18

    Disposable topographic silicon oxide patterns were fabricated from polymeric replicas of sawtoothed glass surfaces, spin-coating of poly(dimethylsiloxane) (PDMS) thin films, and thermal annealing at certain temperature and followed by oxygen plasma treatment of the thin PDMS layer. A simple imprinting process was used to fabricate the replicated PDMS and PS patterns from sawtoothed glass surfaces. Next, thin layers of PDMS films having different thicknesses were spin-coated onto the sawtoothed PS surfaces and annealed at 60 degrees C to be drawn the PDMS into the valley of the sawtoothed PS surfaces, followed by oxygen plasma treatment to fabricate topographic silicon oxide patterns. By control of the thickness of PDMS layers, silicon oxide patterns having various line widths were fabricated. The silicon oxide topographic patterns were used to direct the self-assembly of polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP) block copolymer thin films via solvent annealing process. A highly ordered PS-b-P2VP micellar structure was used to let gold precursor complex with P2VP chains, and followed by oxygen plasma treatment. When the PS-b-P2VP thin films containing gold salts were exposed to oxygen plasma environments, gold salts were reduced to pure gold nanoparticles without changing high degree of lateral order, while polymers were completely degraded. As the width of trough and crest in topographic patterns increases, the number of gold arrays and size of gold nanoparticles are tuned. In the final step, the silicon oxide topographic patterns were selectively removed by wet etching process without changing the arrays of gold nanoparticles.

  2. Gold nanoparticle (AuNPs) and gold nanopore (AuNPore) catalysts in organic synthesis.

    Science.gov (United States)

    Takale, Balaram S; Bao, Ming; Yamamoto, Yoshinori

    2014-04-07

    Organic synthesis using gold has gained tremendous attention in last few years, especially heterogeneous gold catalysis based on gold nanoparticles has made its place in almost all organic reactions, because of the robust and green nature of gold catalysts. In this context, gold nanopore (AuNPore) with a 3D metal framework is giving a new dimension to heterogeneous gold catalysts. Interestingly, AuNPore chemistry is proving better than gold nanoparticles based chemistry. In this review, along with recent advances, major discoveries in heterogeneous gold catalysis are discussed.

  3. Modeling of gold production in Malaysia

    Science.gov (United States)

    Muda, Nora; Ainuddeen, Nasihah Rasyiqah; Ismail, Hamizun; Umor, Mohd Rozi

    2013-04-01

    This study was conducted to identify the main factors that contribute to the gold production and hence determine the factors that affect to the development of the mining industry in Malaysia. An econometric approach was used by performing the cointegration analysis among the factors to determine the existence of long term relationship between the gold prices, the number of gold mines, the number of workers in gold mines and the gold production. The study continued with the Granger analysis to determine the relationship between factors and gold production. Results have found that there are long term relationship between price, gold production and number of employees. Granger causality analysis shows that there is only one way relationship between the number of employees with gold production in Malaysia and the number of gold mines in Malaysia.

  4. Robust nanogap electrodes by self-terminating electroless gold plating.

    Science.gov (United States)

    Serdio V, Victor M; Azuma, Yasuo; Takeshita, Shuhei; Muraki, Taro; Teranishi, Toshiharu; Majima, Yutaka

    2012-11-21

    Robust nanogap electrodes for nanodevices with a separation of 3.0 ± 1.7 nm were simultaneously mass-produced at a yield of 90% by a combination of electron beam lithography (EBL) and electroless gold plating (EGP). Nanogap electrodes demonstrated their robustness as they maintained their structure unchanged up to temperatures of 170 °C, during the isotropic oxygen plasma ashing removal of the amorphous carbon overlayer resulting from scanning electron microscopy observations, therefore maintaining their surface reactivity for EGP and formation of a self-assembled monolayer. A gold layer grows over the electrode surface during EGP, narrowing the separation between the electrodes; growth stops around 3 nm due to a self-termination phenomenon. This is the main factor in the high yield and reproducibility of the EGP process because it prevents contact between the electrodes. A 90% yield is achieved by also controlling the etching and physisorption of gold clusters, which is accomplished by reduction of triiodide ions and heat treatment of the EGP solution, respectively. A mixed self-assembled monolayer of octanethiol and decanedithiol can be formed at the surface of the nanogap electrodes after the oxygen plasma treatment, and decanethiol-protected Au nanoparticles were chemisorbed between the self-terminated nanogap electrodes via decanedithiol. Chemically assembled single-electron transistors based on the nanogap electrodes exhibit ideal, stable, and reproducible Coulomb diamonds.

  5. Plasma turbulence

    Energy Technology Data Exchange (ETDEWEB)

    Horton, W. [Univ. of Texas, Austin, TX (United States). Inst. for Fusion Studies; Hu, G. [Globalstar LP, San Jose, CA (United States)

    1998-07-01

    The origin of plasma turbulence from currents and spatial gradients in plasmas is described and shown to lead to the dominant transport mechanism in many plasma regimes. A wide variety of turbulent transport mechanism exists in plasmas. In this survey the authors summarize some of the universally observed plasma transport rates.

  6. Monoclonal antibody "gold rush".

    Science.gov (United States)

    Maggon, Krishan

    2007-01-01

    The market, sales and regulatory approval of new human medicines, during the past few years, indicates increasing number and share of new biologics and emergence of new multibillion dollar molecules. The global sale of monoclonal antibodies in 2006 were $20.6 billion. Remicade had annual sales gain of $1 billion during the past 3 years and five brands had similar increase in 2006. Rituxan with 2006 sales of $4.7 billion was the best selling monoclonal antibody and biological product and the 6th among the top selling medicinal brand. It may be the first biologic and monoclonal antibody to reach $10 billion annual sales in the near future. The strong demand from cancer and arthritis patients has surpassed almost all commercial market research reports and sales forecast. Seven monoclonal antibody brands in 2006 had sales exceeding $1 billion. Humanized or fully human monoclonal antibodies with low immunogenicity, enhanced antigen binding and reduced cellular toxicity provide better clinical efficacy. The higher technical and clinical success rate, overcoming of technical hurdles in large scale manufacturing, low cost of market entry and IND filing, use of fully human and humanized monoclonal antibodies has attracted funds and resources towards R&D. Review of industry research pipeline and sales data during the past 3 years indicate a real paradigm shift in industrial R&D from pharmaceutical to biologics and monoclonal antibodies. The antibody bandwagon has been joined by 200 companies with hundreds of new projects and targets and has attracted billions of dollars in R&D investment, acquisitions and licensing deals leading to the current Monoclonal Antibody Gold Rush.

  7. Impact of laser produced X-rays on the surface of gold

    Energy Technology Data Exchange (ETDEWEB)

    Latif, Hamid [Department of Physics, University of Engineering and Technology, Lahore 54890 (Pakistan)], E-mail: h4hamidlatif@yahoo.com; Rafique, M. Shahid; Khaleeq-ur-Rahaman, M. [Department of Physics, University of Engineering and Technology, Lahore 54890 (Pakistan); Rawat, R.S. [Plasma Research Laboratory, NIE Nanyang Technological University (Singapore); Sattar, Abdul [Department of Physics, University of Engineering and Technology, Lahore 54890 (Pakistan); Naseem, Shahzad [MERC, Punjab University, Lahore (Pakistan); Lee, P. [Plasma Research Laboratory, NIE Nanyang Technological University (Singapore)

    2008-09-15

    In the paper an attempt has been made to use the laser-induced plasma as an X-ray source for the growth of nanostructures on the surface of gold. For this purpose, an Nd:YAG laser operated at second harmonics ({lambda} = 532 nm, E = 400 mJ) is used to produce plasma from analytical grade 5N pure Al, Cu and W targets. An analytical grade (5N pure) gold substrate was irradiated by X-rays generated from Al, Cu and W plasma under the vacuum {approx}10{sup -4} Torr. The surface was analyzed by two techniques, XRD and AFM. The aberrations in the XRD peaks show that there are significant structural changes in the exposed gold, in terms of decreased reflection intensities, increased dislocation line density, changes in the d-spacing and disturbance in the periodicity of the planes. AFM used to explore the topography of the irradiated gold reveals that regardless of the source, nm sized hillocks have been produced on the gold surface. The roughness of the surface has increased due to the growth of these hillocks.

  8. Gold process mineralogy: Objectives, techniques, and applications

    Science.gov (United States)

    Zhou, Joe Y.; Cabri, Louis J.

    2004-07-01

    The extractive metallurgy of gold is largely driven by mineralogical factors such as gold particle size; association with other minerals; coatings; presence of cyanicides, oxygen consumers, and preg-robbers; presence of refractory gold minerals; and locking of submicroscopic gold in sulfide and sulfarsenide mineral structures. Gold process mineralogy addresses all issues related to gold ore processing by the detailed study of an ore or a mill product. The methodology is widely used as a predictive tool in feasibility studies and during the process development stage, and as a trouble-shooting tool for mineral processing and hydrometallurgical operations.

  9. Serum gold concentrations during treatment with auranofin.

    Science.gov (United States)

    Van Riel, P L; Gribnau, F W; Van de Putte, L B; Arts, C W; Van Aernsbergen, A

    1987-03-01

    Serum gold concentrations were measured in rheumatoid arthritis patients during chronic treatment with the orally adsorbable gold compound auranofin. In agreement with data in the literature, the highest serum gold concentration was reached after 16 weeks of treatment with 6 mg auranofin daily. A striking finding in this study was that thereafter the serum gold concentrations did not appear to plateau but declined gradually. Statistically this resulted in a significantly lower concentration after one year as compared with week 16 (p less than 0.05, paired t-test). It is suggested that a shift from protein bound gold to cell-bound gold might be the explanation.

  10. Collective Thomson Scattering from Laser-Produced Plasmas

    Institute of Scientific and Technical Information of China (English)

    白波; 郑坚; 俞昌旋; 刘万东; 蒋小华; 袁晓东; 郑志坚; 徐冰; 向勇; 赵春茁

    2001-01-01

    Time-resolved Thomson scattering was successfully performed to diagnose the parameters (ZTe, Ue and Ui) of laser-produced gold plasma. The results show that the collisionless dynamic form factor is accurate enough to be used for reducing the plasma parameters from the experimental data.

  11. The role of morphology and coupling of gold nanoparticles in optical breakdown during picosecond pulse exposures

    Directory of Open Access Journals (Sweden)

    Yevgeniy R. Davletshin

    2016-06-01

    Full Text Available This paper presents a theoretical study of the interaction of a 6 ps laser pulse with uncoupled and plasmon-coupled gold nanoparticles. We show how the one-dimensional assembly of particles affects the optical breakdown threshold of its surroundings. For this purpose we used a fully coupled electromagnetic, thermodynamic and plasma dynamics model for a laser pulse interaction with gold nanospheres, nanorods and assemblies, which was solved using the finite element method. The thresholds of optical breakdown for off- and on-resonance irradiated gold nanosphere monomers were compared against nanosphere dimers, trimers, and gold nanorods with the same overall size and aspect ratio. The optical breakdown thresholds had a stronger dependence on the optical near-field enhancement than on the mass or absorption cross-section of the nanostructure. These findings can be used to advance the nanoparticle-based nanoscale manipulation of matter.

  12. Green synthesis and molecular recognition ability of patuletin coated gold nanoparticles.

    Science.gov (United States)

    Ateeq, Muhammad; Shah, Muhammad Raza; ul Ain, Noor; Bano, Samina; Anis, Itrat; Lubna; Faizi, Shaheen; Bertino, Massimo F; Sohaila Naz, Syeda

    2015-01-15

    Patuletin isolated from Tagetespatula was used as a capping and reducing agent to synthesize in one pot gold nanoparticles capped with patuletin. Conjugation of gold with patuletin was confirmed by FT-IR and UV-visible spectroscopy and amount of patuletin conjugated to gold nanoparticles was found to be 63.2% by weight. Particle sizes were measured by atomic force microscopy (AFM) and were found to have a mean diameter of about 45 nm. Patuletin-coated gold nanoparticles were found to be highly fluorescent. To examine their potential as chemical sensors, they were contacted with fourteen different drugs. Of these drugs, only one, piroxicam, was found to quench luminescence. Quenching obeyed Beer's law in a concentration range of 20-260 µM. Important for molecular recognition applications, fluorescence quenching by piroxicam was not affected by pH variation, elevated temperatures, addition of other drugs and addition of blood plasma to the colloidal suspensions.

  13. Formation and Optical Absorption of Photo-reduced Gold Nanoparticles Inside Pores of Mesoporous Silica

    Institute of Scientific and Technical Information of China (English)

    SHI Hua-Zhong; YAO Bao-Dian; ZHANG Li-De; BI Hui-Juan; CAI Wei-Ping; WU Yu-Cheng

    2000-01-01

    Mesoporous silica with gold nanoparticles inside its pores was synthesized by soaking and photo-reduction method. This new material was characterized by transmission electron microscopy, x-ray photoelectron spectroscopy and Brunauer-Emmett-Teller techniques. The results showed that gold nanoparticles were isolated from each other and uniformly dispersed inside the pores of silica, most of which were less than 4 nm in diameter. It was found that in optical absorption spectrum, surface plasma resonance peak of nanosized gold particles assumed a significant redshift (about 55nm) with respect to that predicted by Mie theory. This can be explained in terms of interface interaction (boundary coupling) between gold particles and pore walls of porous silica.

  14. Electron-beam lithography of gold nanostructures for surface-enhanced Raman scattering

    KAUST Repository

    Yue, Weisheng

    2012-10-26

    The fabrication of nanostructured substrates with precisely controlled geometries and arrangements plays an important role in studies of surface-enhanced Raman scattering (SERS). Here, we present two processes based on electron-beam lithography to fabricate gold nanostructures for SERS. One process involves making use of metal lift-off and the other involves the use of the plasma etching. These two processes allow the successful fabrication of gold nanostructures with various kinds of geometrical shapes and different periodic arrangements. 4-mercaptopyridine (4-MPy) and Rhodamine 6G (R6G) molecules are used to probe SERS signals on the nanostructures. The SERS investigations on the nanostructured substrates demonstrate that the gold nanostructured substrates have resulted in large SERS enhancement, which is highly dependent on the geometrical shapes and arrangements of the gold nanostructures. © 2012 IOP Publishing Ltd.

  15. Phage based green chemistry for gold ion reduction and gold retrieval.

    Science.gov (United States)

    Setyawati, Magdiel I; Xie, Jianping; Leong, David T

    2014-01-22

    The gold mining industry has taken its toll on the environment, triggering the development of more environmentally benign processes to alleviate the waste load release. Here, we demonstrate the use of bacteriophages (phages) for biosorption and bioreduction of gold ions from aqueous solution, which potentially can be applied to remediate gold ions from gold mining waste effluent. Phage has shown a remarkably efficient sorption of gold ions with a maximum gold adsorption capacity of 571 mg gold/g dry weight phage. The product of this phage mediated process is gold nanocrystals with the size of 30-630 nm. Biosorption and bioreduction processes are mediated by the ionic and covalent interaction between gold ions and the reducing groups on the phage protein coat. The strategy offers a simple, ecofriendly and feasible option to recover of gold ions to form readily recoverable products of gold nanoparticles within 24 h.

  16. Rare earth element geochemical constrains on metallogeny of Jiapigou gold belt, Northeast China

    Institute of Scientific and Technical Information of China (English)

    HUANG Zhixin; YUAN Wanming; YU Haijun

    2012-01-01

    Analyses of rare earth dements (REE) in gold-bearing quartz vein,granite and altered wall-rock (amphibolite) collected from Jiapigou gold belt in Southeast Jilin Province were conducted using inductively coupled plasma-mass-spectrometry (ICP-MS).The results indicated that the Jiapigou gold belt underwent two periods of gold mineralization:the earlier mineralization was related to the intrusion of Neoarchaean kaligranite,where the REE of earlier gold-bearing quartz veins and Neoarchaean kaligranites were typically featured by lower concentration and positive Eu anomaly; the later mineralization was related to the intrusion of the Yanshanian granite in Mesozoic,where the REE of later gold-bearing quartz veins and Yanshanian granites were typically featured by high concentration and negative Eu anomaly.However,the metallogenic mechanisms of the earlier and of the later gold mineralization periods were analogous,metallogenic materials were heterogenous with metallogenic fluids which mainly originated from magmatic hydrothermal fluids,mixed with metamorphic fluids; the metallogenic materials were mainly derived from the altered wall rock.

  17. Simple method for extracting gold from electrical and electronic wastes using hydrometallurgical process

    Directory of Open Access Journals (Sweden)

    Mohammad Aali Dehchenari

    2017-03-01

    Full Text Available Background: This research studied the feasibility of a simple method for extracting gold from central processing units (CPUs of computer circuit boards without solvent. Methods: Ceramic and composite CPUs of computer circuit boards were used. Gold was extracted using a hydrometallurgical method in six stages: grinding of CPUs, leaching in nitric acid, leaching in aqua regia, removing the excess nitric acid, extracting the gold, washing and purifying the gold deposits. Measurements of extracted precious metals were carried out by inductively coupled plasma (ICP. Results: The results indicated that mean concentrations of gold in the first and second stages of leaching were 0.138 and 31.16 mg/L, respectively. Following the washing stage, the concentration of gold in the final deposit was 25 mg/L. The purity rate of the final deposit was 83.9%, and the final gold recovery yielded 82.3%. Conclusion: The results of this study indicated there is a potential for extracting a high percentage of precious metals from e-wastes without solvent.

  18. Laser-based transfection with conjugated gold nanoparticles

    Institute of Scientific and Technical Information of China (English)

    Cuiping Yao; Xiaochao Qu; Zhenxi Zhang

    2009-01-01

    The irradiation of cells combined with the immunoconjugate of gold nanoparticles by the short pulse laser can make the plasma membrane be transiently permeabilized,which can be used to transfer exogenous molecules into the cells.We explore this technique as a novel gene transfection method for floating cells.Three different floating cells exposed to the laser are selectively transfected with fluorescein isothiocyanatedextran,antibody,and green fluorescent protein (GFP) coding plasmids,and the viability of cells are determined by propidium iodide.For fluorescein isothiocyanate-dextran,the best transfection efficiency of 65% is obtained;for the antibody,it is 74%;whereas for the green fluorescent protein coding plasmids,a very small transfection efficiency is gained.If the transfection efficiency is improved,gold nanoparticles will be very useful as mediator for gene transfection in living cells.

  19. Molecular dynamics simulation of gold cluster growth during sputter deposition

    Science.gov (United States)

    Abraham, J. W.; Strunskus, T.; Faupel, F.; Bonitz, M.

    2016-05-01

    We present a molecular dynamics simulation scheme that we apply to study the time evolution of the self-organized growth process of metal cluster assemblies formed by sputter-deposited gold atoms on a planar surface. The simulation model incorporates the characteristics of the plasma-assisted deposition process and allows for an investigation over a wide range of deposition parameters. It is used to obtain data for the cluster properties which can directly be compared with recently published experimental data for gold on polystyrene [M. Schwartzkopf et al., ACS Appl. Mater. Interfaces 7, 13547 (2015)]. While good agreement is found between the two, the simulations additionally provide valuable time-dependent real-space data of the surface morphology, some of whose details are hidden in the reciprocal-space scattering images that were used for the experimental analysis.

  20. Plasma harmonics

    CERN Document Server

    Ganeev, Rashid A

    2014-01-01

    Preface; Why plasma harmonics? A very brief introduction Early stage of plasma harmonic studies - hopes and frustrations New developments in plasma harmonics studies: first successes Improvements of plasma harmonics; Theoretical basics of plasma harmonics; Basics of HHG Harmonic generation in fullerenes using few-cycle pulsesVarious approaches for description of observed peculiarities of resonant enhancement of a single harmonic in laser plasmaTwo-colour pump resonance-induced enhancement of odd and even harmonics from a tin plasmaCalculations of single harmonic generation from Mn plasma;Low-o

  1. Functionalization of Cobalt Ferrite Nanoparticles by a Vitamin C-assisted Covering with Gold

    Directory of Open Access Journals (Sweden)

    Arūnas Jagminas

    2014-04-01

    The deposition of gold onto the ferrite surface was proved herein by UV-vis absorption and energy- dispersive X-ray (EDX spectroscopy, inductively coupled plasma mass spectrometry analysis, atomic force microscopy (AFM, high resolution transmission electron microscopy (HRTEM and Mössbauer spectroscopy.

  2. New Trends in Gold Catalysts

    Directory of Open Access Journals (Sweden)

    Leonarda F. Liotta

    2014-07-01

    Full Text Available Gold is an element that has fascinated mankind for millennia. The catalytic properties of gold have been a source of debate, due to its complete chemical inertness when in a bulk form, while it can oxidize CO at temperatures as low as ~200 K when in a nanocrystalline state, as discovered by Haruta in the late 1980s [1]. Since then, extensive activity in both applied and fundamental research on gold has been initiated. The importance of the catalysis by gold represents one of the fasted growing fields in science and is proven by the promising applications in several fields, such as green chemistry and environmental catalysis, in the synthesis of single-walled carbon nanotubes, as modifiers of Ni catalysts for methane steam and dry reforming reactions and in biological and electrochemistry applications. The range of reactions catalyzed by gold, as well as the suitability of different supports and the influence of the preparation conditions have been widely explored and optimized in applied research [2]. Gold catalysts appeared to be very different from the other noble metal-based catalysts, due to their marked dependence on the preparation method, which is crucial for the genesis of the catalytic activity. Several methods, including deposition-precipitation, chemical vapor deposition and cation adsorption, have been applied for the preparation of gold catalysts over reducible oxides, like TiO2. Among these methods, deposition-precipitation has been the most frequently employed method for Au loading, and it involves the use of tetrachloroauric (III acid as a precursor. On the other hand, the number of articles dealing with Au-loaded acidic supports is smaller than that on basic supports, possibly because the deposition of [AuCl4]− or [AuOHxCl4−x]− species on acidic supports is difficult, due to their very low point of zero charge. Despite this challenge, several groups have reported the use of acidic zeolites as supports for gold. Zeolites

  3. Nanobubble trouble on gold surfaces

    DEFF Research Database (Denmark)

    Holmberg, Maria; Kuhle, A.; Garnaes, J.

    2003-01-01

    When analyzing surfaces related to biosensors with in situ atomic force microscopy (AFM), the existence of nanobubbles called for our attention. The bubbles seem to form spontaneously when gold surfaces are immersed in clean water and are probably a general phenomenon at water-solid interfaces....... Besides from giving rise to undesired effects in, for example, biosensors, nanobubbles can also cause artifacts in AFM imaging. We have observed nanobubbles on unmodified gold surfaces, immersed in clean water, using standard silicon AFM probes. Nanobubbles can be made to disappear from contact mode AFM...

  4. Economic geology: Gold buried by oxygen

    OpenAIRE

    Gaillard, Fabrice; Copard, Y.

    2015-01-01

    International audience; he Witwatersrand Basin in South Africa contains extraordinary amounts of gold. Thermodynamic calculations suggest that the gold may have accumulated there in response to a perfect storm of conditions available only during the Archaean.

  5. Economic geology: Gold buried by oxygen

    OpenAIRE

    Gaillard, Fabrice; Copard, Y.

    2015-01-01

    International audience; he Witwatersrand Basin in South Africa contains extraordinary amounts of gold. Thermodynamic calculations suggest that the gold may have accumulated there in response to a perfect storm of conditions available only during the Archaean.

  6. 31 CFR 100.4 - Gold coin and gold certificates in general.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Gold coin and gold certificates in general. 100.4 Section 100.4 Money and Finance: Treasury Regulations Relating to Money and Finance EXCHANGE OF PAPER CURRENCY AND COIN In General § 100.4 Gold coin and gold certificates in general....

  7. Single-crystalline gold nanoplates from a commercial gold plating solution.

    Science.gov (United States)

    Li, Zhonghao; Lapeyre, Véronique; Ravaine, Valérie; Ravaine, Serge; Kuhn, Alexander

    2009-03-01

    A novel route was proposed to synthesize gold nanoplates using a commercial gold plating solution as the reactant. Single-crystalline gold nanoplates can be successfully synthesized by reacting gold plating solution with HCl. The as-prepared nanoplates are from several micrometers to tens of micrometers in size. The effects of reactant concentration and temperature on the morphology of the gold products were investigated. The size of the gold nanoplate increases with the decrease of the amount of gold plating solution, while irregular gold nanoparticles are formed as the HCl concentration becomes low. When the reaction temperature is as low as room temperature, nanoplates with a concavity form. Specifically, it is found that the Cl- plays an important role for the formation of these gold nanoplates. The formation mechanism of the gold nanoplates is studied in detail.

  8. Gold and Silver Extraction from Leach Solutions

    OpenAIRE

    Bagdaulet K. Kenzhaliyev; Renata R. Iskhakova; Zamzagul D. Dosymbaeva; Esen N. Sulejmenov

    2014-01-01

    There has been carried out an investigation on the extraction of gold and silver from thiosulfate solutions: standard test and technological solutions of chemical and electrochemical leaching. The influence of related metals on the process of extracting gold from solution was studied. There has been conducted a comparative study of the IR spectra of solutions after the sorption of gold, silver and related metals.

  9. Highly active thermally stable nanoporous gold catalyst

    Science.gov (United States)

    Biener, Juergen; Wittstock, Arne; Biener, Monika M.; Bagge-Hansen, Michael; Baeumer, Marcus; Wichmann, Andre; Neuman, Bjoern

    2016-12-20

    In one embodiment, a system includes a nanoporous gold structure and a plurality of oxide particles deposited on the nanoporous gold structure; the oxide particles are characterized by a crystalline phase. In another embodiment, a method includes depositing oxide nanoparticles on a nanoporous gold support to form an active structure and functionalizing the deposited oxide nanoparticles.

  10. CO oxidation on gold nanoparticles: Theoretical studies

    DEFF Research Database (Denmark)

    Remediakis, Ioannis; Lopez, Nuria; Nørskov, Jens Kehlet

    2005-01-01

    We present a summary of our theoretical results regarding CO oxidation on both oxide-supported and isolated gold nanoparticles. Using Density Functional Theory we have studied the adsorption of molecules and the oxidation reaction of CO on gold clusters. Low-coordinated sites on the gold...

  11. Highly active thermally stable nanoporous gold catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Biener, Juergen; Wittstock, Arne; Biener, Monika M.; Bagge-Hansen, Michael; Baeumer, Marcus; Wichmann, Andre; Neuman, Bjoern

    2016-12-20

    In one embodiment, a system includes a nanoporous gold structure and a plurality of oxide particles deposited on the nanoporous gold structure; the oxide particles are characterized by a crystalline phase. In another embodiment, a method includes depositing oxide nanoparticles on a nanoporous gold support to form an active structure and functionalizing the deposited oxide nanoparticles.

  12. Function of mesenchymal stem cells following loading of gold nanotracers

    Directory of Open Access Journals (Sweden)

    et al

    2011-02-01

    Full Text Available Laura M Ricles1, Seung Yun Nam1,2, Konstantin Sokolov3,1, Stanislav Y Emelianov1,3, Laura J Suggs11Department of Biomedical Engineering, 2Department of Electrical and Computer Engineering, The University of Texas at Austin, Austin, TX, USA; 3Department of Imaging Physics, The University of Texas MD Anderson Cancer Center, Houston, TX, USABackground: Stem cells can differentiate into multiple cell types, and therefore can be used for cellular therapies, including tissue repair. However, the participation of stem cells in tissue repair and neovascularization is not well understood. Therefore, implementing a noninvasive, long-term imaging technique to track stem cells in vivo is needed to obtain a better understanding of the wound healing response. Generally, we are interested in developing an imaging approach to track mesenchymal stem cells (MSCs in vivo after delivery via a polyethylene glycol modified fibrin matrix (PEGylated fibrin matrix using MSCs loaded with gold nanoparticles as nanotracers. The objective of the current study was to assess the effects of loading MSCs with gold nanoparticles on cellular function.Methods: In this study, we utilized various gold nanoparticle formulations by varying size and surface coatings and assessed the efficiency of cell labeling using darkfield microscopy. We hypothesized that loading cells with gold nanotracers would not significantly alter cell function due to the inert and biocompatible characteristics of gold. The effect of nanoparticle loading on cell viability and cytotoxicity was analyzed using a LIVE/DEAD stain and an MTT assay. The ability of MSCs to differentiate into adipocytes and osteocytes after nanoparticle loading was also examined. In addition, nanoparticle loading and retention over time was assessed using inductively coupled plasma mass spectrometry (ICP-MS.Conclusion: Our results demonstrate that loading MSCs with gold nanotracers does not alter cell function and, based on the ICP

  13. Dusty plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Fortov, Vladimir E; Khrapak, Aleksei G; Molotkov, Vladimir I; Petrov, Oleg F [Institute for High Energy Densities, Associated Institute for High Temperatures, Russian Academy of Sciences, Moscow (Russian Federation); Khrapak, Sergei A [Max-Planck-Institut fur Extraterrestrische Physik, Garching (Germany)

    2004-05-31

    The properties of dusty plasmas - low-temperature plasmas containing charged macroparticles - are considered. The most important elementary processes in dusty plasmas and the forces acting on dust particles are investigated. The results of experimental and theoretical investigations of different states of strongly nonideal dusty plasmas - crystal-like, liquid-like, gas-like - are summarized. Waves and oscillations in dusty plasmas, as well as their damping and instability mechanisms, are studied. Some results on dusty plasma investigated under microgravity conditions are presented. New directions of experimental research and potential applications of dusty plasmas are discussed. (reviews of topical problems)

  14. Gold color in dental alloys.

    Science.gov (United States)

    Cameron, T

    1997-01-01

    This article will help the dental laboratory with alloy selection by exploring how the relationship among color, ductility and strength applies to gold and how color can be quantified. Because higher quality materials translate into higher profits, upselling to the dentist and patient is also discussed.

  15. Ultrafast vibrations of gold nanorings

    DEFF Research Database (Denmark)

    Kelf, T; Tanaka, Y; Matsuda, O

    2011-01-01

    We investigate the vibrational modes of gold nanorings on a silica substrate with an ultrafast optical technique. By comparison with numerical simulations, we identify several resonances in the gigahertz range associated with axially symmetric deformations of the nanoring and substrate. We...

  16. Gold, Silver and Bronze Citations.

    Science.gov (United States)

    American School & University, 2003

    2003-01-01

    Presents the gold, silver, and bronze winners of a competition, which judged the most outstanding learning environments at educational institutions nationwide. Jurors spent two days reviewing projects, focusing on concepts and ideas that made them exceptional. For each citation, the article offers information on the firm, client, total area, total…

  17. Optical trapping of gold aerosols

    DEFF Research Database (Denmark)

    Schmitt, Regina K.; Pedersen, Liselotte Jauffred; Taheri, S. M.

    2015-01-01

    Aerosol trapping has proven challenging and was only recently demonstrated.1 This was accomplished by utilizing an air chamber designed to have a minimum of turbulence and a laser beam with a minimum of aberration. Individual gold nano-particles with diameters between 80 nm and 200 nm were trappe...

  18. Calculation and Analysis of Mean Opacity of Gold Mixtures

    Institute of Scientific and Technical Information of China (English)

    YAN An-ying; JIANG Ming; CHENG Xin-lu; YANG Xiang-dong

    2007-01-01

    A screened hydrogenic model for l splitting (SHML) is used to calculate the Rosseland mean opacities of high-Z Au, Ta, Yb, Ho, Gd, Sm, Nd, Sn, Ag plasmas and mixtures of gold and these elements at high temperature (T=200-400eV) and dense (ρ=1g/cm3).From the calculated Rosseland mean opacities of the mixtures, Au-Nd seems to be a better choice than other mixtures.Simultaneously, the reason that the mean opacities of mixture of Au-Sn decrease slightly when T=400eV is analyzed.

  19. Gold nephropathy in juvenile rheumatoid arthritis.

    Science.gov (United States)

    Husserl, F E; Shuler, S E

    1979-01-01

    A 2-year-old girl was treated with gold salts for juvenile rheumatoid arthritis. Treatment had to be discontinued when persistent proteinuria was detected. As this case report indicates, close monitoring of the urine is mandatory during treatment with gold salts to detect early signs of toxicity: hematuria followed by casts and then proteinuria as therapy is continued. Histologic examination with electron microscopy will help to differentiate the different forms of gold toxicity. When the findings are consistent with gold-induced renal involvement, therapy should be discontinued. The gold nephropathy usually resolves in time, with no permanent renal damage.

  20. Hydrofluorination of Alkynes Catalysed by Gold Bifluorides

    OpenAIRE

    Nahra, Fady; Patrick, Scott R.; Bello, Davide; Brill, Marcel; Obled, Alan; Cordes, David B.; Slawin, Alexandra M. Z.; O'Hagan, David; Steven P. Nolan

    2014-01-01

    We report the synthesis of nine new N-heterocyclic carbene gold bifluoride complexes starting from the corresponding N-heterocyclic carbene gold hydroxides. A new methodology to access N,N′-bis(2,6-diisopropylphenyl)imidazol-2-ylidene gold(I) fluoride starting from N,N′-bis(2,6-diisopropylphenyl)imidazol-2-ylidene gold(I) hydroxide and readily available potassium bifluoride is also reported. These gold bifluorides were shown to be efficient catalysts in the hydrofluorination of symmetrical an...

  1. I. Unbound serum gold: procedure for quantitation.

    Science.gov (United States)

    Lorber, A; Vibert, G J; Harralson, A F; Simon, T M

    1983-08-01

    The unbound fraction of many drugs appears to be the therapeutically active component. However, the major problem encountered in following unbound serum gold (UBSG) concentration during chrysotherapy has been the ability to quantitate such a small quantity of gold reliably without matrix interference. The methodology detailed here overcomes these difficulties and provides an effective means of monitoring the UBSG fraction during chrysotherapy. We have observed that the unbound fraction of gold dissipates quickly after gold sodium thiomalate administration and constitutes less than 2% of the total serum gold concentration.

  2. Gold recycling; a materials flow study

    Science.gov (United States)

    Amey, Earle B.

    2000-01-01

    This materials flow study includes a description of trends in consumption, loss, and recycling of gold-containing materials in the United States in 1998 in order to illustrate the extent to which gold is presently being recycled and to identify recycling trends. The quantity of gold recycled, as a percent of the apparent supply of gold, was estimated to be about 30 percent. Of the approximately 446 metric tons of gold refined in the United States in 1998, the fabricating and industrial use losses were 3 percent.

  3. New approach to fabricate nanoporous gold film

    Institute of Scientific and Technical Information of China (English)

    Hui Zhou; Lan Jin; Wei Xu

    2007-01-01

    A simple preparation of ultrathin nanoporous gold film was described. Copper and gold were used to fabricate Cu-Au alloy films through vacuum deposition. The formation of nanoporous gold films from the alloy films involved thermal process and chemical etch by hydrochloric acid or by nitric acid. The free-standing nanoporous gold films have been analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectrometer (XPS) and surface-enhanced Raman scattering (SERS). It was noted that the nanoporous gold film etched by hydrochloric acid is uniform with a cover of fog-like moieties.

  4. [Biosynthesis of gold nanoparticles by Azospirillum brasilense].

    Science.gov (United States)

    Kupriashina, M A; Vetchinkina, E P; Burov, A M; Ponomareva, E G; Nikitina, V E

    2014-01-01

    Plant-associated nitrogen-fixing soil bacteria Azospirillum brasilense were shown to reduce the gold of chloroauric acid to elemental gold, resulting in formation of gold nanoparicles. Extracellular phenoloxidizing enzymes (laccases and Mn peroxidases) were shown to participate in reduction of Au+3 (HAuCl4) to Au(0). Transmission electron microscopy revealed accumulation of colloidal gold nanoparticles of diverse shape in the culture liquid of A. brasilense strains Sp245 and Sp7. The size of the electron-dense nanospheres was 5 to 50 nm, and the size of nanoprisms varied from 5 to 300 nm. The tentative mechanism responsible for formation of gold nanoparticles is discussed.

  5. Relativistic effects in homogeneous gold catalysis.

    Science.gov (United States)

    Gorin, David J; Toste, F Dean

    2007-03-22

    Transition-metal catalysts containing gold present new opportunities for chemical synthesis, and it is therefore not surprising that these complexes are beginning to capture the attention of the chemical community. Cationic phosphine-gold(i) complexes are especially versatile and selective catalysts for a growing number of synthetic transformations. The reactivity of these species can be understood in the context of theoretical studies on gold; relativistic effects are especially helpful in rationalizing the reaction manifolds available to gold catalysts. This Review draws on experimental and computational data to present our current understanding of homogeneous gold catalysis, focusing on previously unexplored reactivity and its application to the development of new methodology.

  6. Mammalian sensitivity to elemental gold (Au?)

    Science.gov (United States)

    Eisler, R.

    2004-01-01

    There is increasing documentation of allergic contact dermatitis and other effects from gold jewelry, gold dental restorations, and gold implants. These effects were especially pronounced among females wearing body-piercing gold objects. One estimate of the prevalence of gold allergy worldwide is 13%, as judged by patch tests with monovalent organogold salts. Eczema of the head and neck was the most common response of individuals hypersensitive to gold, and sensitivity can last for at least several years. Ingestion of beverages containing flake gold can result in allergic-type reactions similar to those seen in gold-allergic individuals exposed to gold through dermal contact and other routes. Studies with small laboratory mammals and injected doses of colloidal gold showed increased body temperatures, accumulations in reticular cells, and dose enhancement in tumor therapy; gold implants were associated with tissue injuries. It is proposed that Au? toxicity to mammals is associated, in part, with formation of the more reactive Au+ and Au3+ species.

  7. Leaching behavior of butanedionedioxime as gold ligand

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Butanedionedioxime, a small organic compound with low-toxicity and good chemical stability, has been proposed as an effective gold ligand in gold extraction. The result of experiment shows that: 1) highly effective gold lixiviantcan be composed of butanedionedioxime (BDM) with many oxidants, especially potassium permanganate; 2)in the leaching system of BD M- K M nO4 the suitable Ox/Lig(ratio of oxidants to gold ligands) tange is 0.20 ~ 0. 50, optimally 0.25 ~0.45 at the pH range of 7 ~ 11; 3) BDM-KMnO4 extraction of gold from an oxide ore is similar to cyanide(cyanide-O2)extraction, but the leaching rate of gold by BDM-KMnO4 is faster than that by cyanide-O2; 4) gold may readily be recov-ered by carbon adsorption and zinc precipitation

  8. [Contact allergy to gold and its alloys. Pertinence of gold salt patch tests].

    Science.gov (United States)

    Collet, E; Lacroix, M; Dalac, S; Ponnelle, C; Lambert, D

    1994-01-01

    Allergic contact dermatitis to gold and its alloys is a rare affection and it is difficult to interpret gold salts patch tests. We report two cases of patients with positive patch tests to 0.5% sodium aurothiosulfate discovered during a dermatology exploration of an occupational contact eczema (for the first patient) and an intolerance to gold jewelry (for the second). There is much confusion in the literature concerning the allergologic exploration of contact dermatitis to gold: no standardized test, possible cross reactions between different gold salts, the tests often irritate. The mechanism of sensitization to gold salts is unknown since pure gold is inalterable and does not contain any salts. The pertinence of a positive test to one or more gold salts must therefore be examined carefully and the diagnosis of gold allergy must not be made without sufficient evidence.

  9. Effect of gold nano-particle layers on ablative acceleration of plastic foil targets

    Energy Technology Data Exchange (ETDEWEB)

    Dhareshwar, L J; Gupta, N K; Chaurasia, S [Bhabha Atomic Research Centre, Mumbai (India); Ayyub, P; Kulkarni, N [Tata Institute of Fundamental Research, Mumbai (India); Badziak, J; Pisarczyk, T; Kasperczuk, A; Parys, P; Rosinski, M; Wolowski, J [Institute of Plasma Physics and Laser Microfusion, 01-497 Warsaw (Poland); Krousky, E; Krasa, J; Masek, K; Pfeifer, M; Skala, J; Ullschmied, J; Velyhan, A; Margarone, D [PALS Research Centre ASCR, 1822 Prague 8 (Czech Republic); Mezzasalma, A, E-mail: dharesh@barc.gov.i [University of Messina (Italy)

    2010-08-01

    Presence of nano-particles on target surface has been observed to lead to increased laser absorption of laser pulse in plasma. Therefore, a coating of nano-particles on foil targets could lead to an enhanced ablative acceleration. The work presented in this paper concerns this possibility. The results of experiments performed with PALS laser system (125 J, {approx}250 ps at 1.3 {mu}m) with a focused intensity of about 10{sup 14} W/cm{sup 2} are presented. 15 {mu}m thick Polyethylene teraphthalate (C{sub 10} H{sub 8} O{sub 4}){sub n} or PET foils show an almost 40% increase in target movement when coated with a layer of gold nano-particles. Comparison between targets with coating of bulk gold and nano-gold shows about 15% higher target movement in gold nano-particle coated PET targets as compared to bulk gold coating. This result is a clear indication of enhanced laser energy absorption in targets with nano-structured surface of gold. We also present evidence to show the effect of nano-particle coating on lateral thermal conduction.

  10. Plasma waves

    CERN Document Server

    Swanson, DG

    1989-01-01

    Plasma Waves discusses the basic development and equations for the many aspects of plasma waves. The book is organized into two major parts, examining both linear and nonlinear plasma waves in the eight chapters it encompasses. After briefly discussing the properties and applications of plasma wave, the book goes on examining the wave types in a cold, magnetized plasma and the general forms of the dispersion relation that characterize the waves and label the various types of solutions. Chapters 3 and 4 analyze the acoustic phenomena through the fluid model of plasma and the kinetic effects. Th

  11. Plasma astrophysics

    CERN Document Server

    Kaplan, S A; ter Haar, D

    2013-01-01

    Plasma Astrophysics is a translation from the Russian language; the topics discussed are based on lectures given by V.N. Tsytovich at several universities. The book describes the physics of the various phenomena and their mathematical formulation connected with plasma astrophysics. This book also explains the theory of the interaction of fast particles plasma, their radiation activities, as well as the plasma behavior when exposed to a very strong magnetic field. The text describes the nature of collective plasma processes and of plasma turbulence. One author explains the method of elementary

  12. Enhanced photo-catalytic activity of gold ion and gold modified

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The gold ion modified TiO2 was prepared by means of sol- gelwhereas gold deposited TiO2 was prepared by means of photo- reduction. The physical properties were influenced significantly by the presence of gold ion or gold. The enhanced photo-activity of gold modified TiO2 was quantified in terms of methylene blue degradation. The presence of gold ion in TiO2 lattices or gold on TiO2 surface enhanced their photo-activity. The optimum molar content of gold ion doping and gold deposition all was 0.5%. The first-order rates constants of gold modified TiO2 was more than that of pure TiO2, and decreased by increasing the content of gold ion and gold when their contents were more than 0.5%. Gold iondoped in TiO2 lattices was more effective to enhance the photo-activity than gold on TiO2 surface. Moreover, the relationship between physical properties, chemical properties and photo-activityhas been discussed.

  13. CMS Industries awarded gold, crystal

    CERN Multimedia

    2006-01-01

    The CMS collaboration honoured 10 of its top suppliers in the seventh annual awards ceremony The representatives of the firms that recieved the CMS Gold and Crystal Awards stand with their awards after the ceremony. The seventh annual CMS Awards ceremony was held on Monday 13 March to recognize the industries that have made substantial contributions to the construction of the collaboration's detector. Nine international firms received Gold Awards, and General Tecnica of Italy received the prestigious Crystal Award. Representatives from the companies attended the ceremony during the plenary session of CMS week. 'The role of CERN, its machines and experiments, beyond particle physics is to push the development of equipment technologies related to high-energy physics,'said CMS Awards Coordinator Domenico Campi. 'All of these industries must go beyond the technologies that are currently available.' Without the involvement of good companies over the years, the construction of the CMS detector wouldn't be possible...

  14. Nanobubble trouble on gold surfaces

    DEFF Research Database (Denmark)

    Holmberg, Maria; Kuhle, A.; Garnaes, J.

    2003-01-01

    When analyzing surfaces related to biosensors with in situ atomic force microscopy (AFM), the existence of nanobubbles called for our attention. The bubbles seem to form spontaneously when gold surfaces are immersed in clean water and are probably a general phenomenon at water-solid interfaces....... Besides from giving rise to undesired effects in, for example, biosensors, nanobubbles can also cause artifacts in AFM imaging. We have observed nanobubbles on unmodified gold surfaces, immersed in clean water, using standard silicon AFM probes. Nanobubbles can be made to disappear from contact mode AFM...... tip and the nanobubble indicates that a small tip cone angle and a relatively hydrophilic tip surface makes it possible to image nanobubbles with contact mode AFM even though the tip has penetrated the surface of the bubble....

  15. Switchable Imbibition in Nanoporous Gold

    CERN Document Server

    Xue, Yahui; Duan, Huiling; Weissmueller, Joerg; Huber, Patrick

    2014-01-01

    Spontaneous imbibition enables the elegant propelling of nano-flows because of the dominance of capillarity at small length scales. The imbibition kinetics are, however, solely determined by the static geometry of the porous host, the capillarity, and the fluidity of the imbibed liquid. This makes active control particularly challenging. Here, we show for aqueous electrolyte imbibition in nanoporous gold that the fluid flow can be reversibly switched on and off through electric potential control of the solid-liquid interfacial tension, i.e. we can accelerate the imbibition front, stop it, and have it proceed at will. Simultaneous measurements of the mass flux and the electrical current allow us to document simple scaling laws for the imbibition kinetics, and to explore the charge flow dynamics in the metallic nanopores. Our findings demonstrate that the high electric conductivity along with the pathways for ionic and/or fluid transport render nanoporous elemental gold a versatile, accurately controllable elec...

  16. Optical property of nanocomposite of mesoporous silica thin films incorporated with gold nanoparticles

    Institute of Scientific and Technical Information of China (English)

    Jingyue Fang; Xueao Zhang; Shiqiao Qin; Shengli Chang

    2011-01-01

    @@ Amino-functionalized mesoporous silica thin films (MTFs) are produced using surface active agent F127,and then gold nanoparticles are introduced into the pore channels to prepare the Au/SiO2 nanocomposite.After assembling the gold, the amino-functionalized MTF undergoes some shrinkage but remains a periodic structure as demonstrated by X-ray diffraction (XRD) patterns.The nanocomposite shows an acute characteristic diffraction peak assigned to (111) plane of the face-centered-cubic structure of gold,indicating that gold nanoparticles crystallize well and grow in a preferred orientation in the pore channels.The surface plasma resonance (SPR) absorption peak near 570 nm undergoes a red-shift accompanied by a strengthening of intensity when HAuCl4 is used to react with the amino groups on the internal pore surfaces for 4, 6, and 8 h.The simulative results are consistent with the experimental ones shows that the absorption property of the Au/SiO2 nanocomposite is influenced by the dipping time, which affects the size and volume fraction of embedded gold nanoparticles.%Amino-functionalized mesoporous silica thin films (MTFs) are produced using surface active agent F127,and then gold nanoparticles are introduced into the pore channels to prepare the Au/SiO2 nanocomposite. After assembling the gold, the amino-functionalized MTF undergoes some shrinkage but remains a periodic structure as demonstrated by X-ray diffraction (XRD) patterns. The nanocomposite shows an acute characteristic diffraction peak assigned to (111) plane of the face-centered-cubic structure of gold,indicating that gold nanoparticles crystallize well and grow in a preferred orientation in the pore channels.The surface plasma resonance (SPR) absorption peak near 570 nm undergoes a red-shift accompanied by a strengthening of intensity when HAuCl4 is used to react with the amino groups on the internal pore surfaces for 4, 6, and 8 h. The simulative results are consistent with the experimental ones shows

  17. Biomolecular Assembly of Gold Nanocrystals

    Energy Technology Data Exchange (ETDEWEB)

    Micheel, Christine Marya [Univ. of California, Berkeley, CA (United States)

    2005-05-20

    Over the past ten years, methods have been developed to construct discrete nanostructures using nanocrystals and biomolecules. While these frequently consist of gold nanocrystals and DNA, semiconductor nanocrystals as well as antibodies and enzymes have also been used. One example of discrete nanostructures is dimers of gold nanocrystals linked together with complementary DNA. This type of nanostructure is also known as a nanocrystal molecule. Discrete nanostructures of this kind have a number of potential applications, from highly parallel self-assembly of electronics components and rapid read-out of DNA computations to biological imaging and a variety of bioassays. My research focused in three main areas. The first area, the refinement of electrophoresis as a purification and characterization method, included application of agarose gel electrophoresis to the purification of discrete gold nanocrystal/DNA conjugates and nanocrystal molecules, as well as development of a more detailed understanding of the hydrodynamic behavior of these materials in gels. The second area, the development of methods for quantitative analysis of transmission electron microscope data, used computer programs written to find pair correlations as well as higher order correlations. With these programs, it is possible to reliably locate and measure nanocrystal molecules in TEM images. The final area of research explored the use of DNA ligase in the formation of nanocrystal molecules. Synthesis of dimers of gold particles linked with a single strand of DNA possible through the use of DNA ligase opens the possibility for amplification of nanostructures in a manner similar to polymerase chain reaction. These three areas are discussed in the context of the work in the Alivisatos group, as well as the field as a whole.

  18. Gemballa Mirage GT Gold Edition

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    前不久,保时捷的专业改装厂Gembaila推出了一款Mirage GT Gold Edition,这款车以Carrera GT为基础,并且使用了大量的碳纤维材料,而且在车身内外配备了一些黄金色的涂装。

  19. Development of double-pulse lasers ablation system for generating gold ion source under applying an electric field

    Science.gov (United States)

    Khalil, A. A. I.

    2015-12-01

    Double-pulse lasers ablation (DPLA) technique was developed to generate gold (Au) ion source and produce high current under applying an electric potential in an argon ambient gas environment. Two Q-switched Nd:YAG lasers operating at 1064 and 266 nm wavelengths are combined in an unconventional orthogonal (crossed-beam) double-pulse configuration with 45° angle to focus on a gold target along with a spectrometer for spectral analysis of gold plasma. The properties of gold plasma produced under double-pulse lasers excitation were studied. The velocity distribution function (VDF) of the emitted plasma was studied using a dedicated Faraday-cup ion probe (FCIP) under argon gas discharge. The experimental parameters were optimized to attain the best signal to noise (S/N) ratio. The results depicted that the VDF and current signals depend on the discharge applied voltage, laser intensity, laser wavelength and ambient argon gas pressure. A seven-fold increases in the current signal by increasing the discharge applied voltage and ion velocity under applying double-pulse lasers field. The plasma parameters (electron temperature and density) were also studied and their dependence on the delay (times between the excitation laser pulse and the opening of camera shutter) was investigated as well. This study could provide significant reference data for the optimization and design of DPLA systems engaged in laser induced plasma deposition thin films and facing components diagnostics.

  20. Boosting infrared energy transfer in 3D nanoporous gold antennas.

    Science.gov (United States)

    Garoli, D; Calandrini, E; Bozzola, A; Ortolani, M; Cattarin, S; Barison, S; Toma, A; De Angelis, F

    2017-01-05

    The applications of plasmonics to energy transfer from free-space radiation to molecules are currently limited to the visible region of the electromagnetic spectrum due to the intrinsic optical properties of bulk noble metals that support strong electromagnetic field confinement only close to their plasma frequency in the visible/ultraviolet range. In this work, we show that nanoporous gold can be exploited as a plasmonic material for the mid-infrared region to obtain strong electromagnetic field confinement, co-localized with target molecules into the nanopores and resonant with their vibrational frequency. The effective optical response of the nanoporous metal enables the penetration of optical fields deep into the nanopores, where molecules can be loaded thus achieving a more efficient light-matter coupling if compared to bulk gold. In order to realize plasmonic resonators made of nanoporous gold, we develop a nanofabrication method based on polymeric templates for metal deposition and we obtain antenna arrays resonating at mid-infrared wavelengths selected by design. We then coat the antennas with a thin (3 nm) silica layer acting as the target dielectric layer for optical energy transfer. We study the strength of the light-matter coupling at the vibrational absorption frequency of silica at 1240 cm(-1) through the analysis of the experimental Fano lineshape that is benchmarked against identical structures made of bulk gold. The boost in the optical energy transfer from free-space mid-infrared radiation to molecular vibrations in nanoporous 3D nanoantenna arrays can open new application routes for plasmon-enhanced physical-chemical reactions.

  1. CO extrusion in homogeneous gold catalysis: reactivity of gold acyl species generated through water addition to gold vinylidenes.

    Science.gov (United States)

    Bucher, Janina; Stößer, Tim; Rudolph, Matthias; Rominger, Frank; Hashmi, A Stephen K

    2015-01-26

    Herein, we describe a new gold-catalyzed decarbonylative indene synthesis. Synergistic σ,π-activation of diyne substrates leads to gold vinylidene intermediates, which upon addition of water are transformed into gold acyl species, a type of organogold compound hitherto only scarcely reported. The latter are shown to undergo extrusion of CO, an elementary step completely unknown for homogeneous gold catalysis. By tuning the electronic and steric properties of the starting diyne systems, this new reactivity could be exploited for the synthesis of indene derivatives in high yields.

  2. Feasibilty of electroplated gold for hybrid microcircuits

    Energy Technology Data Exchange (ETDEWEB)

    Blessner, P.L.

    1978-01-01

    Electroplating was investigated as a method of providing thick gold films. Because electroplated gold has never been used for hybrid microcircuit (HMC) substrate metallization, this feasibility study was also designed to determine the characteristics of electroplated gold and its compatibility with present HMC fabrication processes. Ceramic substrates 95 by 114 mm (3.75 by 4.5 in.) were electroplated with 6, 10, and 25 ..mu..m of gold after 0.02 ..mu..m of chromium and 0.5 ..mu..m of gold had been either sputtered or vacuum evaporated onto the substrate surfaces. Substrates vacuum evaporated with 6 ..mu..m of gold were used as a control group. The substrates were evaluated for via resistance, RF electrical characteristics, conductor definition and resolution, solder wettability, thermocompression bondability, and environmental stability.

  3. Linear Optical Properties of Gold Colloid

    Directory of Open Access Journals (Sweden)

    Jingmin XIA

    2015-11-01

    Full Text Available Gold colloid was prepared by reducing HAuCl4·4H2O with Na3C6H5O7·2H2O. The morphology, size of gold nanoparticles and the optical property of colloid were characterized by transmission electron microscope and UV-Vis spectrophotometer, respectively. It shows that the gold nanoparticles are in the shape of spheres with diameters less than 8 nm, and the surface plasmon resonance absorption peak is located at about 438 nm. As the volume fraction of gold particles increases, the intensity of absorption peak strengthens. The optical property of gold colloid was analyzed by Maxwell-Garnett (MG effective medium theory in the company of Drude dispersion model. The results show that the matrix dielectric constant is a main factor, which influences the optical property of gold colloid.DOI: http://dx.doi.org/10.5755/j01.ms.21.4.9558

  4. Electrochemical Assay of Gold-Plating Solutions

    Science.gov (United States)

    Chiodo, R.

    1982-01-01

    Gold content of plating solution is assayed by simple method that required only ordinary electrochemical laboratory equipment and materials. Technique involves electrodeposition of gold from solution onto electrode, the weight gain of which is measured. Suitable fast assay methods are economically and practically necessary in electronics and decorative-plating industries. If gold content in plating bath is too low, poor plating may result, with consequent economic loss to user.

  5. The Gold Standard Since Alec Ford

    OpenAIRE

    Eichengreen, Barry

    1989-01-01

    This paper surveys studies of the operation of the classical gold standard published subsequent to the appearance of Alec Ford's The Gold Standard 1880-1914: Britain and Argentina in 1962. Contributions tend to fall under two headings: those which emphasize stock equilibrium in money markets (examples of the so-called "monetary approach") and those which emphasize instead stockflow interactions in bond markets. The paper then addresses the perennial question of how the gold standard worked. A...

  6. Gold and Silver Extraction from Leach Solutions

    Directory of Open Access Journals (Sweden)

    Bagdaulet K. Kenzhaliyev

    2014-03-01

    Full Text Available There has been carried out an investigation on the extraction of gold and silver from thiosulfate solutions: standard test and technological solutions of chemical and electrochemical leaching. The influence of related metals on the process of extracting gold from solution was studied. There has been conducted a comparative study of the IR spectra of solutions after the sorption of gold, silver and related metals.

  7. NCO-sP(EO-stat-PO Coatings on Gold Sensors—a QCM Study of Hemocompatibility

    Directory of Open Access Journals (Sweden)

    Frank K. Gehring

    2011-05-01

    Full Text Available The reliability of implantable blood sensors is often hampered by unspecific adsorption of plasma proteins and blood cells. This not only leads to a loss of sensor signal over time, but can also result in undesired host vs. graft reactions. Within this study we evaluated the hemocompatibility of isocyanate conjugated star shaped polytheylene oxide—polypropylene oxide co-polymers NCO-sP(EO-stat-PO when applied to gold surfaces as an auspicious coating material for gold sputtered blood contacting sensors. Quartz crystal microbalance (QCM sensors were coated with ultrathin NCO-sP(EO-stat-PO films and compared with uncoated gold sensors. Protein resistance was assessed by QCM measurements with fibrinogen solution and platelet poor plasma (PPP, followed by quantification of fibrinogen adsorption. Hemocompatibility was tested by incubation with human platelet rich plasma (PRP. Thrombin antithrombin-III complex (TAT, β-thromboglobulin (β-TG and platelet factor 4 (PF4 were used as coagulation activation markers. Furthermore, scanning electron microscopy (SEM was used to visualize platelet adhesion to the sensor surfaces. Compared to uncoated gold sensors, NCO-sP(EO-stat-PO coated sensors revealed significant better resistance against protein adsorption, lower TAT generation and a lower amount of adherent platelets. Moreover, coating with ultrathin NCO-sP(EO-stat-PO films creates a cell resistant hemocompatible surface on gold that increases the chance of prolonged sensor functionality and can easily be modified with specific receptor molecules.

  8. Determination of trace gold, platinum and palladium in lean-platinum ore by bismuth fire assaying-inductively coupled plasma mass spectrometry%铋试金-电感耦合等离子体质谱法测定贫铂矿石中痕量金铂钯

    Institute of Scientific and Technical Information of China (English)

    李可及; 赵朝辉; 范建雄

    2013-01-01

    为解决传统铅试金法中所存在的污染问题,通过理论计算、优化操作流程等方式建立了针对贫铂矿石中痕量金、铂、钯的铋试金-电感耦合等离子体质谱测定方法.结果表明,选用40.0g氧化铋、30.0g硼酸、20.0 g无水碳酸钠和2.0g面粉作为试金配料的组分,贵金属的选择性好,排除重金属的能力强,可基本满足贫铂矿石样品(20.0 g)中痕量金、铂、钯的测定需要.实验还针对铋扣难以完全回收的问题,采用了在出炉时趁热倾倒熔渣,使铋扣于空气中自然冷却然后取出的方法.在进行质谱测定时,选择197 Au、195 Pt、105 pd分别作为金、铂、钯的测定同位素,以185 Re、115In作为校正基体效应与信号漂移的内标元素.方法检出限(ng/g,以20.0g取样量计)分别为:0.51(Au)、0.43 (Pt)、0.50(Pd),Pt、Pd、Au测定结果的相对标准偏差(RSD,n=5)分别为4.7%、5.4%、9.7%.对GBW07291和GBW07293铂族元素地球化学标准物质中Pt、Pd、Au进行测定,测定值与认定值基本一致.方法可用于地质样品中痕量Au、Pt、Pd的准确测定.%In order to solve the pollution problem in traditional lead fire assaying method,the determination method of trace gold,platinum and palladium in lean-platinum ore by bismuth fire assaying-inductively coupled plasma mass spectrometry was established through theoretical calculation and optimization of operation procedures.The results showed that,the selectivity of precious metal by fire assaying formula containing 40.0 g of bismuth oxide,30.0 g of boric acid,20.0 g of anhydrous sodium carbonate and 2.0 g of flour was good.This formula had strong exclusion ability to precious metals and could meet the determination requirements of trace gold,platinum and palladium in lean-platinum ore samples (20.0 g).Aiming at the problem that bismuth button was hardly recovered,the melt slag was poured while hot.The bismuth button was naturally cooled in air,thus it could

  9. Gold Photoluminescence: Wavelength and Polarization Engineering

    DEFF Research Database (Denmark)

    Andersen, Sebastian Kim Hjælm; Pors, Anders Lambertus; Bozhevolnyi, Sergey I.

    2015-01-01

    We demonstrate engineering of the spectral content and polarization of photoluminescence (PL) from arrayed gold nanoparticles atop a subwavelength-thin dielectric spacer and optically-thick gold film, a configuration that supports gap-surface plasmon resonances (GSPRs). Choice of shapes and dimen......We demonstrate engineering of the spectral content and polarization of photoluminescence (PL) from arrayed gold nanoparticles atop a subwavelength-thin dielectric spacer and optically-thick gold film, a configuration that supports gap-surface plasmon resonances (GSPRs). Choice of shapes...

  10. Gold Rushes and mineral property rights allocation

    DEFF Research Database (Denmark)

    Sinding, Knud

    , is to handle the other projects that are generated by the "gold rush" informational externalities created by the initial discovery. At the core of the problems of dealing with a gold rush situation is both the informational externality and an institutional framework which is not designed to deal with large...... influxes of prospectors competing for a very limited area. This paper charts significant gold rush events in the mineral industry in recent decades and uses preliminary data on the areas impacted by these gold rushes to argue that many mineral tenure systems should be modified in order to be better able...

  11. CO oxidation on gold nanoparticles: Theoretical studies

    DEFF Research Database (Denmark)

    Remediakis, Ioannis; Lopez, Nuria; Nørskov, Jens Kehlet

    2005-01-01

    We present a summary of our theoretical results regarding CO oxidation on both oxide-supported and isolated gold nanoparticles. Using Density Functional Theory we have studied the adsorption of molecules and the oxidation reaction of CO on gold clusters. Low-coordinated sites on the gold...... nanoparticles can adsorb small inorganic molecules such as O2 and CO, and the presence of these sites is the key factor for the catalytic properties of supported gold nanoclusters. Other contributions, induced by the presence of the support, can provide parallel channels for the reaction and modulate the final...

  12. The Stabilizing Effects in Gold Carbene Complexes.

    Science.gov (United States)

    Nunes Dos Santos Comprido, Laura; Klein, Johannes E M N; Knizia, Gerald; Kästner, Johannes; Hashmi, A Stephen K

    2015-08-24

    Bonding and stabilizing effects in gold carbene complexes are investigated by using Kohn-Sham density functional theory (DFT) and the intrinsic bond orbital (IBO) approach. The π-stabilizing effects of organic substituents at the carbene carbon atom coordinated to the gold atom are evaluated for a series of recently isolated and characterized complexes, as well as intermediates of prototypical 1,6-enyne cyclization reactions. The results indicate that these effects are of particular importance for gold complexes especially because of the low π-backbonding contribution from the gold atom. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Gold Nanoparticle Mediated Phototherapy for Cancer

    Directory of Open Access Journals (Sweden)

    Cuiping Yao

    2016-01-01

    Full Text Available Gold nanoparticles exhibit very unique physiochemical and optical properties, which now are extensively studied in range of medical diagnostic and therapeutic applications. In particular, gold nanoparticles show promise in the advancement of cancer treatments. This review will provide insights into the four different cancer treatments such as photothermal therapy, gold nanoparticle-aided photodynamic therapy, gold nanoparticle-aided radiation therapy, and their use as drug carrier. We also discuss the mechanism of every method and the adverse effects and its limitations.

  14. Trace Elements in Fluid Inclusions in the Carlin-Type Gold Deposits, Southwestern Guizhou Province

    Institute of Scientific and Technical Information of China (English)

    苏文超; 胡瑞忠; 漆亮; 方维萱

    2001-01-01

    Fluid inclusions in quartz from the Lannigou and Yata Carlin-type gold deposits in southwestern Guizhou were analyzed by inductively coupled plasma-mass spectrometry for their trace elements (Co, Ni, Cu, Pb, Zn, Pt, etc. ). The results show that quartz fluid inclusions entrapped at different ore-forming stages contain higher Co, Ni, Cu, Pb and Zn. It has been found for the first time that the ore-forming fluids responsible for the Carlin-type gold deposits are rich in Pt. From this it can be concluded that basic volcanic rocks seem to be one of the im portant sources of ore-forming materials for the Carlin-type gold deposits.

  15. Gold nanoparticles synthesized by gamma radiation and stabilized by bovine serum albumin

    Energy Technology Data Exchange (ETDEWEB)

    Leal, Jessica; Silva, Andressa A.; Geraldes, Adriana N.; Lugao, Ademar B., E-mail: jessicaleal@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Grasselli, Mariano, E-mail: mariano.grasselli@gmail.com [Departamento de Ciencia y Tecnologia, Universidad Nacional de Quilmes, Bernal (Argentina)

    2015-07-01

    Gold nanoparticles (AuNPs) are a new option for pharmaceutical and cosmetic industries due to their interesting chemical, electrical and catalytic properties. Research for cancer treatments have been developed using this promising radiotherapy agent. The challenge of gold nanoparticles is to keep them stable, due to metallic behavior. It is know that surface plasma resonance promotes agglomeration of metallic nanoparticles, but they are not stable. Stabilizers have been used to reduce agglomeration. The aim of this work is reduction of HAuCl{sub 4} salt to AuNPs performed by gamma radiation {sup 60}Co source and the stabilization of gold nanoparticles using bovine serum albumin (BSA) fraction V as stabilizer agent. AuNPs were characterized by UV-visible to verify the nanoparticles formation. Samples containing BSA and samples obtained by the conventional method (without stabilizer) were monitored for two weeks and analyzed. Results were compared. (author)

  16. Tunable SERS-Tags-Hidden Gold Nanorattles for Theranosis of Cancer Cells with Single Laser Beam

    Science.gov (United States)

    Chen, Zhaolong; Yu, Dexin; Huang, Yu; Zhang, Zhengjun; Liu, Ting; Zhan, Jinhua

    2014-10-01

    With the use of gold nanostructures, photothermal therapy (PTT) of cancer has great advantages compared to conventional methods, such as noninvasive targeted destruction and easily operation. Generally speaking, respective diagnosis and therapy of tumor require at least two instruments, leading to incongruence of tumor borders between diagnosis and therapy. To tackle this problem, tunable SERS-tags-hidden gold nanorattles (STHGNRs) have been designed and developed here for theranosis of cancer with single laser beam. The surface plasma resonance peak of STHGNRs can be tuned from visible region to near-infrared region by controlling the cavity size and shell thickness. The outer shells not only improve the stability of the SERS reporters but also enhance the brightness by more than two order magnitude compared to gold nanoparticles. In vitro study, immuno STHGNRs can serve as theranosis agents simultaneously for sensitive and efficient theranosis of cancer cells.

  17. Imaging plasmonic fields near gold nanospheres in attosecond time-resolved streaked photoelectron spectra

    Science.gov (United States)

    Li, Jianxiong; Thumm, Uwe

    2016-05-01

    To study time-resolved photoemission from gold nanospheres, we introduce a quantum-mechanical approach, including the plasmonic near-field-enhancement of the streaking field at the surface of the nanosphere. We use Mie theory to calculate the plasmonically enhanced fields near 10 to 200 nm gold nanospheres, driven by incident near infrared (NIR) or visible laser pulses. We model the gold conduction band in terms of a spherical square well potential. Our simulated streaked photoelectron spectra reveal a plasmonic amplitude enhancement and phase shift related to calculations that exclude the induced plasmonic field. The phase shift is due to the plasma resonance. This suggests the use of streaked photoelectron spectroscopy for imaging the dielectric response and plasmonic field near nanoparticles. Supported by the NSD-EPSCoR program, NSF, and the USDoE.

  18. Gold Fever! Seattle Outfits the Klondike Gold Rush. Teaching with Historic Places.

    Science.gov (United States)

    Blackburn, Marc K.

    This lesson is based on the National Register of Historic Places registration file, "Pioneer Square Historic District," and other sources about Seattle (Washington) and the Klondike Gold Rush. The lesson helps students understand how Seattle exemplified the prosperity of the Klondike Gold Rush after 1897 when news of a gold strike in…

  19. Non-LTE models for synthetic spectra of type Ia supernovae/hot stars with extremely extended atmospheres

    CERN Document Server

    Sauer, D N; Pauldrach, A W A

    2006-01-01

    Realistic atmospheric models that link the properties and the physical conditions of supernova ejecta to observable spectra are required for the quantitative interpretation of observational data of type Ia supernovae (SN Ia) and the assessment of the physical merits of theoretical supernova explosion models. The numerical treatment of the radiation transport - yielding the synthetic spectra - in models of SN Ia ejecta in early phases is usually carried out in analogy to atmospheric models of `normal' hot stars. Applying this analogy indiscriminately leads to inconsistencies in SN Ia models because a diffusive lower boundary, while justified for hot stars, is invalid for hydrogen and helium-deficient supernova ejecta. In type Ia supernovae the radiation field does not thermalize even at large depths, and large optical depths are not reached at all wavelengths. We derive an improved description of the lower boundary that allows a more consistent solution of the radiation transfer in SN Ia and therefore yields m...

  20. A non-LTE study of neutral and singly-ionized calcium in late-type stars

    Science.gov (United States)

    Mashonkina, L.; Korn, A. J.; Przybilla, N.

    2007-01-01

    Aims:Non-local thermodynamical equilibrium (NLTE) line formation for neutral and singly-ionized calcium is considered through a range of spectral types when the Ca abundance varies from the solar value down to [Ca/H] = -5. We evaluate the influence of departures from LTE on Ca abundance determinations and inspect the possibility of using Ca I / Ca II line-strength ratios as indicators of surface gravity for extremely metal-poor stars. Methods: A comprehensive model atom for Ca I and Ca II is presented. Accurate radiative and electron collisional atomic data are incorporated. The role of inelastic collisions with hydrogen atoms in the statistical equilibrium of Ca I/II is estimated empirically from inspection of their different influences on the Ca I and Ca II lines in selected stars with well determined stellar parameters and high-quality observed spectra. Results: The dependence of NLTE effects on the atmospheric parameters is discussed. Departures from LTE significantly affect the profiles of Ca I lines over the whole range of stellar parameters being considered. However, at [Ca/H] ≥ -2, NLTE abundance correction of individual lines have a low absolute value due to the different influence of NLTE effects on line wings and the line core. At lower Ca abundances, NLTE leads to systematically depleted total absorption in the line and positive abundance corrections, exceeding +0.5 dex for Ca I λ 4226 at [Ca/H] = -4.9. In contrast, the NLTE effects strengthen the Ca II lines and lead to negative abundance corrections. NLTE corrections are small, ≤0.02 dex, for the Ca II resonance lines, and they grow in absolute value with decreasing Ca abundance for the IR lines of multiplet 3d-4p, exceeding 0.4 dex in the metal-poor models with [Fe/H] ≤ -3. As a test and first application of the Ca I/II model atom, Ca abundances are determined on the basis of plane-parallel LTE model atmospheres for the Sun, Procyon (F IV-V), and seven metal-poor stars, using high S/N and high-resolution spectra at visual and near-IR wavelengths. Lines of Ca I and Ca II give consistent abundances for all objects (except Procyon) when collisions with hydrogen atoms are taken into account. The derived absolute solar Ca abundance (from Ca I and Ca II lines) is log \\varepsilon_Ca,⊙ = 6.38 ± 0.06. For Procyon, the mean Ca abundance from Ca I lines is markedly subsolar, [Ca/H] = -0.14 ± 0.03. All metal-poor stars within our sample show an overabundance of calcium relative to iron with [Ca/Fe] abundance ratios of 0.26 to 0.46 that are typical of the halo population. The W(Ca I 4226) / W(Ca II 8498) equivalent width ratio is predicted to be sensitive to surface gravity for extremely metal-poor stars, while this is not the case for the ratio involving the Ca II resonance line(s).

  1. A non-LTE study of neutral and singly-ionized calcium in late-type stars

    CERN Document Server

    Mashonkina, L I; Przybilla, N

    2006-01-01

    Non-local thermodynamical equilibrium (NLTE) line formation for neutral and singly-ionized calcium is considered through a range of spectral types when the Ca abundance varies from the solar value down to [Ca/H] = -5. Departures from LTE significantly affect the profiles of Ca I lines over the whole range of stellar parameters considered. However, at [Ca/H] >= -2, NLTE abundance correction of individual lines may be small in absolute value due to the different influence of NLTE effects on line wings and the line core. At lower Ca abundances, NLTE leads to systematically depleted total absorption in the line and positive abundance corrections, exceeding +0.5 dex for Ca I 4226 at [Ca/H] = -4.9. In contrast, NLTE effects strengthen the Ca II lines and lead to negative abundance corrections. NLTE corrections are small, <= 0.02 dex, for the Ca II resonance lines. For the IR lines of multiplet 3d - 4p, they grow in absolute value with decreasing Ca abundance exceeding 0.4 dex in metal-poor stars with [Fe/H] <...

  2. LIME - a flexible, non-LTE line excitation and radiation transfer method for millimeter and far-infrared wavelengths

    DEFF Research Database (Denmark)

    Brinch, Christian; Hogerheijde, Michiel

    2010-01-01

    can be used as input, ranging from analytical descriptions over tabulated models to SPH simulations. To generate the Delaunay grid we sample the input model randomly, but weigh the sample probability with the molecular density and other parameters, and thereby we obtain an average grid point...

  3. Ultra-metal-poor Stars: Spectroscopic Determination of Stellar Atmospheric Parameters Using Iron Non-LTE Line Abundances

    Science.gov (United States)

    Ezzeddine, Rana; Frebel, Anna; Plez, Bertrand

    2017-10-01

    We present new ultra-metal-poor stars parameters with [Fe/H] up-to-date iron model atom with a new recipe for non-elastic hydrogen collision rates. We study the departures from LTE in their atmospheric parameters and show that they can grow up to ∼1.00 dex in [Fe/H], ∼150 K in {T}{eff} and ∼0.5 dex in log g toward the lowest metallicities. Accurate NLTE atmospheric stellar parameters, in particular [Fe/H] being significantly higher, are the first step to eventually providing full NLTE abundance patterns that can be compared with Population III supernova nucleosynthesis yields to derive properties of the first stars. Overall, this maximizes the potential of these likely second-generation stars to investigate the early universe and how the chemical elements were formed.

  4. Protein corona composition of gold nanoparticles/nanorods affects amyloid beta fibrillation process

    Science.gov (United States)

    Mirsadeghi, Somayeh; Dinarvand, Rassoul; Ghahremani, Mohammad Hossein; Hormozi-Nezhad, Mohammad Reza; Mahmoudi, Zohreh; Hajipour, Mohammad Javad; Atyabi, Fatemeh; Ghavami, Mahdi; Mahmoudi, Morteza

    2015-03-01

    Protein fibrillation process (e.g., from amyloid beta (Aβ) and α-synuclein) is the main cause of several catastrophic neurodegenerative diseases such as Alzheimer's and Parkinson diseases. During the past few decades, nanoparticles (NPs) were recognized as one of the most promising tools for inhibiting the progress of the disease by controlling the fibrillation kinetic process; for instance, gold NPs have a strong capability to inhibit Aβ fibrillations. It is now well understood that a layer of biomolecules would cover the surface of NPs (so called ``protein corona'') upon the interaction of NPs with protein sources. Due to the fact that the biological species (e.g., cells and amyloidal proteins) ``see'' the protein corona coated NPs rather than the pristine coated particles, one should monitor the fibrillation process of amyloidal proteins in the presence of corona coated NPs (and not pristine coated ones). Therefore, the previously obtained data on NPs effects on the fibrillation process should be modified to achieve a more reliable and predictable in vivo results. Herein, we probed the effects of various gold NPs (with different sizes and shapes) on the fibrillation process of Aβ in the presence and absence of protein sources (i.e., serum and plasma). We found that the protein corona formed a shell at the surface of gold NPs, regardless of their size and shape, reducing the access of Aβ to the gold inhibitory surface and, therefore, affecting the rate of Aβ fibril formation. More specifically, the anti-fibrillation potencies of various corona coated gold NPs were strongly dependent on the protein source and their concentrations (10% serum/plasma (simulation of an in vitro milieu) and 100% serum/plasma (simulation of an in vivo milieu)).Protein fibrillation process (e.g., from amyloid beta (Aβ) and α-synuclein) is the main cause of several catastrophic neurodegenerative diseases such as Alzheimer's and Parkinson diseases. During the past few decades

  5. Earthworm extracts utilized in the green synthesis of gold nanoparticles capable of reinforcing the anticoagulant activities of heparin

    Science.gov (United States)

    Kim, Hee Kyeong; Choi, Myung-Jin; Cha, Song-Hyun; Koo, Yean Kyoung; Jun, Sang Hui; Cho, Seonho; Park, Youmie

    2013-12-01

    Gold nanoparticles were obtained using a green synthesis approach with aqueous earthworm extracts without any additional reducing or capping agents. The gold nanoparticles were characterized using UV-visible spectrophotometry, high-resolution transmission electron microscopy, atomic force microscopy, field emission scanning electron microscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and inductively coupled plasma mass spectrometry. The anticoagulant activity of the gold nanoparticles was assessed using the activated partial thromboplastin time and was mildly enhanced by combining the gold nanoparticles with heparin. In addition to the generation of spherical nanoparticles with an average diameter of 6.13 ± 2.13 nm, cubic and block-shaped nanoparticles with an average aspect ratio, defined as the length divided by width, of 1.47 were also observed.

  6. The extra cellular synthesis of gold and silver nanoparticles and their free radical scavenging and antibacterial properties.

    Science.gov (United States)

    Ramamurthy, C H; Padma, M; samadanam, I Daisy mariya; Mareeswaran, R; Suyavaran, A; Kumar, M Suresh; Premkumar, K; Thirunavukkarasu, C

    2013-02-01

    The bio reduction of chloro auric acid (HAuCl(4)) and silver nitrate (AgNO(3)) is achieved extracellularly by using the aqueous extract of Solanum torvum (S. torvum) fruit. The nanoparticle formation was screened by UV-visible spectroscopy through color conversion due to surface plasma resonance bands at 560 nm and 430 nm for gold and silver nanoparticles respectively. The spherical shapes with smooth surface of gold and silver nanoparticles were analyzed through scanning electron microscope and its presence was confirmed by energy dispersive X-ray spectroscopy (SEM/EDX). The functional groups in the gold and silver salts and the bio interactive functional groups present in the S. torvum extract were characterized by employing Fourier transform infra-red spectroscopy (FTIR). The biomedical properties of gold and silver nanoparticles were premeditated as free radical scavenging activity and antibacterial static agents. Gold and silver nanoparticles serve as strong hydroxyl, superoxide, nitric oxide and DPPH radical scavengers in contrast to their corresponding metal oxides. The radical quenching properties of gold and silver nanoparticles were found to correlate with in vitro DNA protective effect. The silver nanoparticles show strong zone of inhibition against Escherichia coli, Pseudomonas and Bacillus whereas, gold nanoparticles exhibit fair zone of inhibition. To our knowledge this is the first report that S. torvum extract can reduce metal acids to nano materials. Copyright © 2012 Elsevier B.V. All rights reserved.

  7. Synthesis and characterization of biomatrixed-gold nanoparticles by the mushroom Flammulina velutipes and its heterogeneous catalytic potential.

    Science.gov (United States)

    Narayanan, Kannan Badri; Park, Hyun Ho; Han, Sung Soo

    2015-12-01

    Sustainable and greener synthesis of intracellular gold nanoparticles using mushroom Flammulina velutipes is reported. Incubation of a mushroom in chloroaurate solution resulted in the synthesis and immobilization of stable gold nanoparticles inside the mushroom mycelia. Transmission electron microscopic (TEM) analysis revealed the presence of gold nanoparticles (⩽20nm) inside the mycelia, primarily on the inner surface of the cell membrane. Inductively coupled plasma-optical emission spectrometry (ICP-OES) revealed that the accumulated gold concentration ranged from 64.4 to 330.5mgkg(-1) dry weight (DW) in the mushroom mycelia. The reduction of Au(3+) ions to Au(0) and stabilization of gold nanoparticles occurred within 1h, and the formation of fcc crystalline gold nanoparticles was confirmed by X-ray diffraction (XRD) analysis. This facile intracellular synthesis of gold nanoparticles by a mushroom without using any toxic chemicals or technologically expensive processes is used as a heterogeneous catalyst in the reduction of organic pollutants methylene blue (MB) and 4-nitrophenol (4NP). The reduction reaction follows pseudo-first order kinetics with a reaction rate constant of 0.0529min(-1) and 0.1236min(-1) for MB and 4NP, respectively. This biological process of biomatrixing of metal nanoparticles for heterogeneous catalytic reactions is simple, nontoxic, environmentally benign, and economically viable compared to the chemical synthetic routes.

  8. Ultrafast vibrations of gold nanorings

    DEFF Research Database (Denmark)

    Kelf, T; Tanaka, Y; Matsuda, O;

    2011-01-01

    elucidate the corresponding mode shapes and find that the substrate plays an important role in determining the mode damping. This study demonstrates the need for a plasmonic nano-optics approach to understand the optical excitation and detection mechanisms for the vibrations of plasmonic nanostructures.......We investigate the vibrational modes of gold nanorings on a silica substrate with an ultrafast optical technique. By comparison with numerical simulations, we identify several resonances in the gigahertz range associated with axially symmetric deformations of the nanoring and substrate. We...

  9. [Biliary, renal and fecal elimination and distribution of gold after a single oral administration of auranofin, quantified by the instrumental neutron activation analysis method].

    Science.gov (United States)

    Benn, H P; Schnier, C; Bauer, E; Seiler, K U; Elhöft, H; Löffler, H

    1991-01-01

    Three days after cholecystectomy, seven patients received a single dose of auranofin (5 tablets Ridaura = 4.35 mg gold). At defined time points thereafter the gold content in samples of blood, plasma, urine, bile, and feces was determined by instrumental neutron activation analysis (INAA). Maxima of the mean gold concentrations in blood (140 +/- 42 ng/ml) and plasma (173 +/- 54 ng/ml) are found 2 h after oral administration of the antirheumatic agent, after 16 h in urine (43 +/- 28 ng/ml) and bile (65 +/- 50 ng/ml), and after 24 h in erythrocytes (greater than 200 ng/ml). The mean terminal half-lives are 7.6 days (blood), 15 days (plasma), 5 days (erythrocytes), and 6.5 days (bile). The cumulative biliary gold excretion within 8 days after the administration of auranofin was 1.6%, compared with 4% and 40% for renal and fecal elimination, respectively. The gold concentration in plasma is always higher than that in bile. There is a close correlation between the areas under the concentration curves (AUC) in bile and plasma (r = 0.864).

  10. Plasma Antenna

    OpenAIRE

    N M Vijay

    2014-01-01

    The fundamental base of plasma antenna is the use of an ionized medium as a conductor. The plasma antenna is a radiofrequency antenna formed by a plasma columns, Filaments or sheets, which are excited by a surface wave. The relevance of this device is how rapidly it can be turned on and off, only applying an electrical pulse. Besides its wide carrier frequency, the great directivity and controllable antenna shape. Otherwise a disadvantage is that it needs energy to be ionized....

  11. Plasma physics

    CERN Document Server

    Drummond, James E

    2013-01-01

    A historic snapshot of the field of plasma physics, this fifty-year-old volume offers an edited collection of papers by pioneering experts in the field. In addition to assisting students in their understanding of the foundations of classical plasma physics, it provides a source of historic context for modern physicists. Highly successful upon its initial publication, this book was the standard text on plasma physics throughout the 1960s and 70s.Hailed by Science magazine as a ""well executed venture,"" the three-part treatment ranges from basic plasma theory to magnetohydrodynamics and microwa

  12. Fabrication of porous silicon by metal-assisted etching using highly ordered gold nanoparticle arrays

    Science.gov (United States)

    Scheeler, Sebastian P.; Ullrich, Simon; Kudera, Stefan; Pacholski, Claudia

    2012-08-01

    A simple method for the fabrication of porous silicon (Si) by metal-assisted etching was developed using gold nanoparticles as catalytic sites. The etching masks were prepared by spin-coating of colloidal gold nanoparticles onto Si. An appropriate functionalization of the gold nanoparticle surface prior to the deposition step enabled the formation of quasi-hexagonally ordered arrays by self-assembly which were translated into an array of pores by subsequent etching in HF solution containing H2O2. The quality of the pattern transfer depended on the chosen preparation conditions for the gold nanoparticle etching mask. The influence of the Si surface properties was investigated by using either hydrophilic or hydrophobic Si substrates resulting from piranha solution or HF treatment, respectively. The polymer-coated gold nanoparticles had to be thermally treated in order to provide a direct contact at the metal/Si interface which is required for the following metal-assisted etching. Plasma treatment as well as flame annealing was successfully applied. The best results were obtained for Si substrates which were flame annealed in order to remove the polymer matrix - independent of the substrate surface properties prior to spin-coating (hydrophilic or hydrophobic). The presented method opens up new resources for the fabrication of porous silicon by metal-assisted etching. Here, a vast variety of metal nanoparticles accessible by well-established wet-chemical synthesis can be employed for the fabrication of the etching masks.

  13. Absorption, fluorescence and resonance Rayleigh scattering spectral characteristics of interaction of gold nanoparticle with safranine T

    Institute of Scientific and Technical Information of China (English)

    HE Youqiu; LIU Shaopu; LIU Qin; LIU Zhongfang; HU Xiaoli

    2005-01-01

    The interaction between gold nanoparticle and safranine T (ST) has been studied with resonance Rayleigh scattering (RRS) spectra, absorption and fluorescence spectra. In the pH 5 solution, citrate [(H2L)2-] self-assembles on the surface of positively-charged gold nanoparticle, which results in the [(Au)n(H2L)m]x- complex. In other words, one of carboxylate oxygens in (H2L)2- moves inward and combines with gold nanoparticle. The other carboxylate oxygens moves outward to form a supermolecular complex anion with x negative charges. Then by virtue of electrostatic attraction, hydrophobic force and charge transfer action, the complex anion binds with ST cation to form a new ion-association complex. Here (H2L)2- acts as a bridge. The formation of the complex results in the significant enhancement of RRS intensity, the appearance of new RRS spectrum, the red shift of plasma absorption band of gold nanoparticle as well as the decrease in the absorbance and fluorescence quenching for safranine T. In this work, the interaction between gold nanoparticle and ST on the RRS, absorption and fluorescence spectra has been investigated. The reason why RRS intensity increases greatly and the reaction mechanism have been inquired. The results show that RRS spectra can not only be used to study nanoparticle and reaction product, but also are a sensitive means to characterize and detect nanoparticles.

  14. A simple soft lithographic nanopatterning of gold on gallium arsenide via galvanic displacement.

    Science.gov (United States)

    Lim, Hyuneui; Noh, Jung-Hyun; Choi, Dae-Geun; Kim, Wan-Doo; Maboudian, Roya

    2010-08-01

    Nanoscale patterning of gold layers on GaAs substrate is demonstrated using a combination of soft lithographic molding and galvanic displacement deposition. First, an electroless deposition method has been developed to plate gold on GaAs with ease and cost-effectiveness. The electroless metallization process is performed by dipping the GaAs substrates into a gold salt solution without any reducing agents or additives. The deposition proceeds via galvanic displacement in which gold ions in the aqueous solution are reduced by electrons arising from the GaAs substrate itself. The deposition rate, surface morphology and adhesion property can be modulated by the plating parameters such as the choice of acids and the immersion time. Second, soft lithographic patterning of nanodots, nanorings, and nanolines are demonstrated on GaAs substrates with hard-polydimethylsiloxane (h-PDMS) mold and plasma etching. This method can be easily applied to the metallization and nanopatterning of gold on GaAs surfaces.

  15. Sorption Recovery of Gold Thiosulphate Complexes

    Institute of Scientific and Technical Information of China (English)

    A.G.Kholmogorov; O.N.Kononova; 等

    2002-01-01

    The gold sorption from thiosulphate solutions on carbon sorbents and on anion exchangers was studied. It was shown that the anion exchangers AV-17-10P and AP-100 are the most effective and selective at pH=5-8. These anion exchangers can be recommended for the gold recovery from the industrial solutions.

  16. 2008: Golden Time in Gold Market

    Institute of Scientific and Technical Information of China (English)

    Guo; Yan

    2008-01-01

      Pushed by increased demand from both jewelers and investors, China has become the drivin, g force behind the world's gold market in 2007. Chinas gold market this year has maintained its growing momentum with booming demand, not only in the domestic market but also in the international market.……

  17. 2008: Golden Time in Gold Market

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ Pushed by increased demand from both jewelers and investors, China has become the drivin, g force behind the world's gold market in 2007. Chinas gold market this year has maintained its growing momentum with booming demand, not only in the domestic market but also in the international market.

  18. Gold-Collar Workers. ERIC Digest.

    Science.gov (United States)

    Wonacott, Michael E.

    The gold-collar worker has problem-solving abilities, creativity, talent, and intelligence; performs non-repetitive and complex work difficult to evaluate; and prefers self management. Gold-collar information technology workers learn continually from experience; recognize the synergy of teams; can demonstrate leadership; and are strategic thinkers…

  19. Galvanic Synthesis of Hollow Gold Nanoshells

    Science.gov (United States)

    2015-02-01

    pulses in the NIR.2 The advantage of hollow nanoshells over solid gold (Au) or silver (Ag) nanoparticles , or alloys thereof,3 is that the...Karna SP. Synthesis of gold and silver nanoparticles and characterization of structural, optical, and electronic properties. Aberdeen Proving Ground...

  20. Goudafzettingen in Suriname (Gold deposits in Surinam)

    NARCIS (Netherlands)

    Brinck, J.W.

    1956-01-01

    THE GOLD DEPOSITS IN SURINAM AND THE DISTRIBUTION OF CONCESSIONS THROUGH THE COUNTRY The fieldwork on the occurrence of primary and secondary gold deposits in Surinam on which this thesis is based was carried out by order of the Welfare Fund Surinam (Welvaarts Fonds Suriname) during the periods

  1. Nonlinear optical studies of single gold nanoparticles

    NARCIS (Netherlands)

    Dijk, Meindert Alexander van

    2007-01-01

    Gold nanoparticles are spherical clusters of gold atoms, with diameters typically between 1 and 100 nanometers. The applications of these particles are rather diverse, from optical labels for biological experiments to data carrier for optical data storage. The goal of my project was to develop new

  2. Numerical simulations of nanostructured gold films

    DEFF Research Database (Denmark)

    Repän, Taavi; Frydendahl, Christian; Novikov, Sergey M.

    2017-01-01

    We present an approach to analyse near-field effects on nanostructured gold films by finite element simulations. The studied samples are formed by fabricating gold films near the percolation threshold and then applying laser damage. Resulting samples have complicated structures, which...

  3. Goudafzettingen in Suriname (Gold deposits in Surinam)

    NARCIS (Netherlands)

    Brinck, J.W.

    1956-01-01

    THE GOLD DEPOSITS IN SURINAM AND THE DISTRIBUTION OF CONCESSIONS THROUGH THE COUNTRY The fieldwork on the occurrence of primary and secondary gold deposits in Surinam on which this thesis is based was carried out by order of the Welfare Fund Surinam (Welvaarts Fonds Suriname) during the periods Dece

  4. Goudafzettingen in Suriname (Gold deposits in Surinam)

    NARCIS (Netherlands)

    Brinck, J.W.

    1956-01-01

    THE GOLD DEPOSITS IN SURINAM AND THE DISTRIBUTION OF CONCESSIONS THROUGH THE COUNTRY The fieldwork on the occurrence of primary and secondary gold deposits in Surinam on which this thesis is based was carried out by order of the Welfare Fund Surinam (Welvaarts Fonds Suriname) during the periods Dece

  5. RF Sputtering of Gold Contacts On Niobium

    Science.gov (United States)

    Barr, D. W.

    1983-01-01

    Reliable gold contacts are deposited on niobium by combination of RF sputtering and photolithography. Process results in structures having gold only where desired for electrical contact. Contacts are stable under repeated cycling from room temperature to 4.2 K and show room-temperature contact resistance as much as 40 percent below indium contacts made by thermalcompression bonding.

  6. Sesquicentennial: Gold Rush to Golden Statehood.

    Science.gov (United States)

    Sabato, George

    1998-01-01

    Provides an annotated bibliography of educational resources that can be used to support instructional units on the Gold Rush or the sesquicentennial of California's statehood. The materials include workbooks, videos, teacher's guides, monographs, and magazines. Offers a brief history of the Gold Rush and a set of relevant discussion questions.…

  7. Computational approaches to homogeneous gold catalysis.

    Science.gov (United States)

    Faza, Olalla Nieto; López, Carlos Silva

    2015-01-01

    Homogenous gold catalysis has been exploding for the last decade at an outstanding pace. The best described reactivity of Au(I) and Au(III) species is based on gold's properties as a soft Lewis acid, but new reactivity patterns have recently emerged which further expand the range of transformations achievable using gold catalysis, with examples of dual gold activation, hydrogenation reactions, or Au(I)/Au(III) catalytic cycles.In this scenario, to develop fully all these new possibilities, the use of computational tools to understand at an atomistic level of detail the complete role of gold as a catalyst is unavoidable. In this work we aim to provide a comprehensive review of the available benchmark works on methodological options to study homogenous gold catalysis in the hope that this effort can help guide the choice of method in future mechanistic studies involving gold complexes. This is relevant because a representative number of current mechanistic studies still use methods which have been reported as inappropriate and dangerously inaccurate for this chemistry.Together with this, we describe a number of recent mechanistic studies where computational chemistry has provided relevant insights into non-conventional reaction paths, unexpected selectivities or novel reactivity, which illustrate the complexity behind gold-mediated organic chemistry.

  8. Preparation of conductive gold nanowires in confined environment of gold-filled polymer nanotubes.

    Science.gov (United States)

    Mitschang, Fabian; Langner, Markus; Vieker, Henning; Beyer, André; Greiner, Andreas

    2015-02-01

    Continuous conductive gold nanofibers are prepared via the "tubes by fiber templates" process. First, poly(l-lactide) (PLLA)-stabilized gold nanoparticles (AuNP) with over 60 wt% gold are synthesized and characterized, including gel permeation chromatography coupled with a diode array detector. Subsequent electrospinning of these AuNP with template PLLA results in composite nanofibers featuring a high gold content of 57 wt%. Highly homogeneous gold nanowires are obtained after chemical vapor deposition of 345 nm of poly(p-xylylene) (PPX) onto the composite fibers followed by pyrolysis of the polymers at 1050 °C. The corresponding heat-induced transition from continuous gold-loaded polymer tubes to smooth gold nanofibers is studied by transmission electron microscopy and helium ion microscopy using both secondary electrons and Rutherford backscattered ions.

  9. Gold Liquid Crystals in the XXI Century

    Directory of Open Access Journals (Sweden)

    Manuel Bardají

    2014-08-01

    Full Text Available Since the first gold liquid crystal was described in 1986, much effort has been done to prepare new compounds bearing this property. The review deals with the last results obtained in this new century. Gold(I has a strong affinity to give linear co-ordination and metal-metal interactions, which produce a rich supramolecular chemistry, and can promote the behavior as liquid crystal. Therefore, most liquid crystals are based on rod-like gold(I compounds, while gold(III liquid crystals are scarce. Calamitic and discotic mesogens have been reported, as well as chiral liquid crystals. Weak interactions such as H-bonds have also been used to obtain gold mesogens. Some of them exhibit additional properties, such as color, luminescence, and chirality. Luminescence has been reported, not only in the solid state or in solution, but also in the mesophase. This is relevant for applications in LEDs (Light Emitting Diodes, information storage, and sensors.

  10. Magnetically mediated vortexlike assembly of gold nanoshells.

    Science.gov (United States)

    Sun, Jianfei; Dong, Jian; Sun, Dongke; Guo, Zhirui; Gu, Ning

    2012-04-24

    Gold nanoshells currently attract increasing research interests due to the important role in many subjects. For practical applications, random arrangement of the nanoparticles is often unfavored so that the assembly of gold nanoshells is becoming a central issue. We here proposed to utilize time-variant magnetic field to direct the assembly of gold nanoshells. It was discovered that the alternating magnetic field can mediate the vortex-like assembly of gold nanoshells. The mechanism was explored and thought to be relative with the electric field of induction which caused the thermal gradient on the substrate and the electric force. The vortexlike structure as well as the assembly mechanism will play an important role in research and application of gold nanomaterials.

  11. Tailored nanoporous gold for ultrahigh fluorescence enhancement.

    Science.gov (United States)

    Lang, X Y; Guan, P F; Fujita, T; Chen, M W

    2011-03-07

    We report molecular fluorescence enhancement of free-standing nanoporous gold in which the nanoporosity can be arbitrarily tailored by the combination of dealloying and electroless gold plating. The nanoporous gold fabricated by this facile method possesses unique porous structures with large gold ligaments and very small pores, and exhibits significant improvements in surface enhanced fluorescence as well as structure rigidity. It demonstrates that the confluence effect of improved quantum yield and excitation of fluorophores is responsible for the large fluorescence enhancement due to the near-field enhancement of nanoporous gold, which arises from the strong electromagnetic coupling between neighboring ligaments and the weakening of plasmon damping of the large ligaments because of the small pore size and large ligament size, respectively.

  12. Ordering Gold Nanoparticles with DNA Origami Nanoflowers.

    Science.gov (United States)

    Schreiber, Robert; Santiago, Ibon; Ardavan, Arzhang; Turberfield, Andrew J

    2016-08-23

    Nanostructured materials, including plasmonic metamaterials made from gold and silver nanoparticles, provide access to new materials properties. The assembly of nanoparticles into extended arrays can be controlled through surface functionalization and the use of increasingly sophisticated linkers. We present a versatile way to control the bonding symmetry of gold nanoparticles by wrapping them in flower-shaped DNA origami structures. These "nanoflowers" assemble into two-dimensonal gold nanoparticle lattices with symmetries that can be controlled through auxiliary DNA linker strands. Nanoflower lattices are true composites: interactions between the gold nanoparticles are mediated entirely by DNA, and the DNA origami will fold into its designed form only in the presence of the gold nanoparticles.

  13. Molecular Beam Optical Study of Gold Sulfide and Gold Oxide

    Science.gov (United States)

    Zhang, Ruohan; Yu, Yuanqin; Steimle, Timothy

    2016-06-01

    Gold-sulfur and gold-oxygen bonds are key components to numerous established and emerging technologies that have applications as far ranging as medical imaging, catalysis, electronics, and material science. A major theoretical challenge for describing this bonding is correctly accounting for the large relativistic and electron correlation effects. Such effects are best studied in diatomic, AuX, molecules. Recently, the observed AuS electronic state energy ordering was measured and compared to a simple molecular orbital diagram prediction. Here we more thoroughly investigate the nature of the electronic states of both AuS and AuO from the analysis of high-resolution (FWHM\\cong35MHz) optical Zeeman spectroscopy of the (0,0){B}2Σ--{X}2Π3/2 bands. The determined fine and hyperfine parameters for the {B}2Σ- state of AuO differ from those extracted from the analysis of a hot, Doppler-limited, spectrum. It is demonstrated that the nature of the {B}2Σ- states of AuO and AuS are radically different. The magnetic tuning of AuO and AuS indicates that the {B}2Σ- states are heavily contaminated. Supported by the National Science Foundation under Grant No.1265885. D. L. Kokkin, R. Zhang, T. C. Steimle, I. A. Wyse, B. W. Pearlman and T. D. Varberg, J. Phys. Chem. A., 119(48), 4412, 2015. L. C. O'Brien, B. A. Borchert, A. Farquhar, S. Shaji, J. J. O'Brien and R. W. Field, J. Mol. Spectrosc., 252(2), 136, 2008

  14. The Plasma Interaction Experiment (PIX) description and test program. [electrometers

    Science.gov (United States)

    Ignaczak, L. R.; Haley, F. A.; Domino, E. J.; Culp, D. H.; Shaker, F. J.

    1978-01-01

    The plasma interaction experiment (PIX) is a battery powered preprogrammed auxiliary payload on the LANDSAT-C launch. This experiment is part of a larger program to investigate space plasma interactions with spacecraft surfaces and components. The varying plasma densities encountered during available telemetry coverage periods are deemed sufficient to determine first order interactions between the space plasma environment and the biased experimental surfaces. The specific objectives of the PIX flight experiment are to measure the plasma coupling current and the negative voltage breakdown characteristics of a solar array segment and a gold plated steel disk. Measurements will be made over a range of surface voltages up to plus or minus kilovolt. The orbital environment will provide a range of plasma densities. The experimental surfaces will be voltage biased in a preprogrammed step sequence to optimize the data returned for each plasma region and for the available telemetry coverage.

  15. Thermodynamics estimation of copper plasma efficiency from secondary raw material

    Directory of Open Access Journals (Sweden)

    Віктор Сергійович Козьмін

    2014-09-01

    Full Text Available The results of the thermodynamic evaluation of oxidative plasma copper refining efficiency recycled from impurities present in the feedstock are shown. It was established that the type of impurity factor increasing the efficiency of the plasma refining the potential change of Gibbs varies from 1,4 to 4, 8, and for silver, and of gold there is a transition from an unlikely to real positive state. 

  16. The 'price' of Olympic Gold.

    Science.gov (United States)

    Hogan, K; Norton, K

    2000-06-01

    In 1981 the Commonwealth Government established the Australian Institute of Sport (AIS). The Australian Sports Commission (ASC) which administers the AIS has 2 objectives: (1) excellence in sports performances; and (2) increased participation in sports and sports activities. State-based institutes of sport have also been established with the same or very similar objectives. Federal policy directs the bulk of the ASC budget to elite athlete programs. A smaller proportion goes towards community participation. The official reason is based on the notion of the 'trickle-down' or 'demonstration' effect. That is, a flow-on of benefits to the broader community in the form of increased participation as a direct result of elite sports success. The aims of this study were to determine the (1) spending pattern to elite sports programs for the 5 Olympics 1976/77 to 1995/96, (2) evidence for the two ASC objectives having been met, and (3) expected medal tally at the 2000 Olympic Games. Results show funding (in 1998 dollars), has accelerated from about $1.2 million (1976/77) to $106 million in (1997/98), particularly since the Games were awarded to Sydney. The total amount spent on elite athletes was $0.918 billion. In the period 1980-96 Australia won 25 gold and 115 total Olympic medals. This equates to approximately $37 million per gold and $8 million per medal in general. There was a significant linear relationship between money spent and total medals won. This was also found when all medal types were analysed independently. The predicted medal tally in 2000 (based on the cost per medal and the expenditure towards Sydney) indicates the medal count will be about 14+/-1 gold, 15+/-2 silver and 33+/-4 bronze. Based on our nation's record of international sporting achievement, there is little doubt we have fulfilled the ASC's first objective. Current data on physical activity patterns of Australians suggest the second objective has not been met. Focusing attention on and achieving

  17. Influence of laser-induced breakdown on the fragmentation of gold nanoparticles in water

    Science.gov (United States)

    Serkov, A. A.; Kuzmin, P. G.; Rakov, I. I.; Shafeev, G. A.

    2016-08-01

    The process of fragmentation of gold nanoparticles in water exposed to nanosecond IR laser radiation (1060 - 1070 nm) is studied. The behaviour of the size distribution and extinction spectrum of nanoparticles is investigated at different experimental parameters. The dependences of the size distribution maximum position and distribution width on the laser pulse duration and the corresponding characteristics of the laser plasma, arising on the nanoparticles, are analysed. The results are explained by the plasma influence on the laser radiation absorption by the colloidal solution.

  18. Cancer theranostics with gold nanoshells.

    Science.gov (United States)

    Zhao, Jun; Wallace, Michael; Melancon, Marites P

    2014-09-01

    Gold nanoshells (AuNSs) present a vivid example of integrating nanoscience in order to solve a biomedical problem. AuNSs exhibit tunable surface plasmon resonance, which can be tuned to the near-infrared region in order to realize optimal tissue penetration. The highly efficient light-to-heat transformation by AuNSs during laser irradiation causes thermal damage to the tumor without damaging healthy organs. Transient nanobubbles can form around AuNSs during laser treatment and induce mechanical stress specifically in tumor cells. AuNSs also serve as a versatile platform for the delivery of various diagnostic and therapeutic agents. In this article, we describe the physicochemical properties of AuNSs in the context of their design, preparation and application in cancer theranostics. Ultimately, we look beyond the current research on AuNSs and discussed future challenges to their successful translation into clinical use.

  19. Gold-catalyzed naphthalene functionalization

    Directory of Open Access Journals (Sweden)

    Iván Rivilla

    2011-05-01

    Full Text Available The complexes IPrMCl (IPr = 1,3-bis(diisopropylphenylimidazol-2-ylidene, M = Cu, 1a; M = Au, 1b, in the presence of one equiv of NaBAr'4 (Ar' = 3,5-bis(trifluoromethylphenyl, catalyze the transfer of carbene groups: C(RCO2Et (R = H, Me from N2C(RCO2Et to afford products that depend on the nature of the metal center. The copper-based catalyst yields exclusively a cycloheptatriene derivative from the Buchner reaction, whereas the gold analog affords a mixture of products derived either from the formal insertion of the carbene unit into the aromatic C–H bond or from its addition to a double bond. In addition, no byproducts derived from carbene coupling were observed.

  20. Origin of the transition voltage in gold-vacuum-gold atomic junctions.

    Science.gov (United States)

    Wu, Kunlin; Bai, Meilin; Sanvito, Stefano; Hou, Shimin

    2013-01-18

    The origin and the distance dependence of the transition voltage of gold-vacuum-gold junctions are investigated by employing first-principles quantum transport simulations. Our calculations show that atomic protrusions always exist on the electrode surface of gold-vacuum-gold junctions fabricated using the mechanically controllable break junction (MCBJ) method. The transition voltage of these gold-vacuum-gold junctions with atomically sharp electrodes is determined by the local density of states (LDOS) of the apex gold atom on the electrode surface rather than by the vacuum barrier shape. More specifically, the absolute value of the transition voltage roughly equals the rising edge of the LDOS peak contributed by the 6p atomic orbitals of the gold atoms protruding from the electrode surface, whose local Fermi level is shifted downwards when a bias voltage is applied. Since the LDOS of the apex gold atom depends strongly on the exact shape of the electrode, the transition voltage is sensitive to the variation of the atomic configuration of the junction. For asymmetric junctions, the transition voltage may also change significantly depending on the bias polarity. Considering that the occurrence of the transition voltage requires the electrode distance to be larger than a critical value, the interaction between the two electrodes is actually rather weak. Consequently, the LDOS of the apex gold atom is mainly determined by its local atomic configuration and the transition voltage only depends weakly on the electrode distance as observed in the MCBJ experiments.

  1. The giant Jiaodong gold province: The key to a unified model for orogenic gold deposits?

    Directory of Open Access Journals (Sweden)

    David I. Groves

    2016-05-01

    Full Text Available Although the term orogenic gold deposit has been widely accepted for all gold-only lode-gold deposits, with the exception of Carlin-type deposits and rare intrusion-related gold systems, there has been continuing debate on their genesis. Early syngenetic models and hydrothermal models dominated by meteoric fluids are now clearly unacceptable. Magmatic-hydrothermal models fail to explain the genesis of orogenic gold deposits because of the lack of consistent spatially – associated granitic intrusions and inconsistent temporal relationships. The most plausible, and widely accepted, models involve metamorphic fluids, but the source of these fluids is hotly debated. Sources within deeper segments of the supracrustal successions hosting the deposits, the underlying continental crust, and subducted oceanic lithosphere and its overlying sediment wedge all have their proponents. The orogenic gold deposits of the giant Jiaodong gold province of China, in the delaminated North China Craton, contain ca. 120 Ma gold deposits in Precambrian crust that was metamorphosed over 2000 million years prior to gold mineralization. The only realistic source of fluid and gold is a subducted oceanic slab with its overlying sulfide-rich sedimentary package, or the associated mantle wedge. This could be viewed as an exception to a general metamorphic model where orogenic gold has been derived during greenschist- to amphibolite-facies metamorphism of supracrustal rocks: basaltic rocks in the Precambrian and sedimentary rocks in the Phanerozoic. Alternatively, if a holistic view is taken, Jiaodong can be considered the key orogenic gold province for a unified model in which gold is derived from late-orogenic metamorphic devolatilization of stalled subduction slabs and oceanic sediments throughout Earth history. The latter model satisfies all geological, geochronological, isotopic and geochemical constraints but the precise mechanisms of auriferous fluid release, like many

  2. The giant Jiaodong gold province:The key to a unified model for orogenic gold deposits?

    Institute of Scientific and Technical Information of China (English)

    David I. Groves; M. Santosh

    2016-01-01

    Although the term orogenic gold deposit has been widely accepted for all gold-only lode-gold deposits, with the exception of Carlin-type deposits and rare intrusion-related gold systems, there has been continuing debate on their genesis. Early syngenetic models and hydrothermal models dominated by meteoric fluids are now clearly unacceptable. Magmatic-hydrothermal models fail to explain the genesis of orogenic gold deposits because of the lack of consistent spatially e associated granitic intrusions and inconsistent temporal relationships. The most plausible, and widely accepted, models involve meta-morphic fluids, but the source of these fluids is hotly debated. Sources within deeper segments of the supracrustal successions hosting the deposits, the underlying continental crust, and subducted oceanic lithosphere and its overlying sediment wedge all have their proponents. The orogenic gold deposits of the giant Jiaodong gold province of China, in the delaminated North China Craton, contain ca. 120 Ma gold deposits in Precambrian crust that was metamorphosed over 2000 million years prior to gold mineralization. The only realistic source of fluid and gold is a subducted oceanic slab with its overlying sulfide-rich sedimentary package, or the associated mantle wedge. This could be viewed as an exception to a general metamorphic model where orogenic gold has been derived during greenschist- to amphibolite-facies metamorphism of supracrustal rocks: basaltic rocks in the Precambrian and sedi-mentary rocks in the Phanerozoic. Alternatively, if a holistic view is taken, Jiaodong can be considered the key orogenic gold province for a unified model in which gold is derived from late-orogenic metamorphic devolatilization of stalled subduction slabs and oceanic sediments throughout Earth history. The latter model satisfies all geological, geochronological, isotopic and geochemical constraints but the precise mechanisms of auriferous fluid release, like many other subduction

  3. Plant growth regulators enhance gold uptake in Brassica juncea.

    Science.gov (United States)

    Kulkarni, Manoj G; Stirk, Wendy A; Southway, Colin; Papenfus, Heino B; Swart, Pierre A; Lux, Alexander; Vaculík, Marek; Martinka, Michal; Van Staden, Johannes

    2013-01-01

    The use of plant growth regulators is well established and they are used in many fields of plant science for enhancing growth. Brassica juncea plants were treated with 2.5, 5.0 and 7.5 microM auxin indole-3-butyric acid (IBA), which promotes rooting. The IBA-treated plants were also sprayed with 100 microM gibberellic acid (GA3) and kinetin (Kin) to increase leaf-foliage. Gold (I) chloride (AuCl) was added to the growth medium of plants to achieve required gold concentration. The solubilizing agent ammonium thiocyanate (1 g kg(-1)) (commonly used in mining industries to solubilize gold) was added to the nutrient solution after six weeks of growth and, two weeks later, plants were harvested. Plant growth regulators improved shoot and root dry biomass of B. juncea plants. Inductively Coupled Plasma Optical Emission Spectrometry analysis showed the highest Au uptake for plants treated with 5.0 microM IBA. The average recovery of Au with this treatment was significantly greater than the control treatment by 45.8 mg kg(-1) (155.7%). The other IBA concentrations (2.5 and 7.5 microM) also showed a significant increase in Au uptake compared to the control plants by 14.7 mg kg(-1) (50%) and 42.5 mg kg(-1) (144.5%) respectively. A similar trend of Au accumulation was recorded in the roots of B. juncea plants. This study conducted in solution culture suggests that plant growth regulators can play a significant role in improving phytoextraction of Au.

  4. Magnetic Ordering in Gold Nanoclusters

    Energy Technology Data Exchange (ETDEWEB)

    Agrachev, Mikhail; Antonello, Sabrina; Dainese, Tiziano; Ruzzi, Marco; Zoleo, Alfonso; Aprà, Edoardo; Govind, Niranjan; Fortunelli, Alessandro; Sementa, Luca; Maran, Flavio

    2017-06-12

    Several research groups have observed magnetism in monolayer-protected gold-cluster samples, but the results were often contradictory and thus a clear understanding of this phenomenon is still missing. We used Au25(SCH2CH2Ph)180, which is a paramagnetic cluster that can be prepared with atomic precision and whose structure is known precisely. Previous magnetometry studies only detected paramagnetism. We used samples representing a range of crystallographic orders and studied their magnetic behaviors by electron paramagnetic resonance (EPR). As a film, Au25(SCH2CH2Ph)180 displays paramagnetic behavior but, at low temperature, ferromagnetic interactions are detectable. One or few single crystals undergo physical reorientation with the applied field and display ferromagnetism, as detected through hysteresis experiments. A large collection of microcrystals is magnetic even at room temperature and shows distinct paramagnetic, superparamagnetic, and ferromagnetic behaviors. Simulation of the EPR spectra shows that both spin-orbit coupling and crystal distortion are important to determine the observed magnetic behaviors. DFT calculations carried out on single cluster and periodic models predict values of spin6orbit coupling and crystal6splitting effects in agreement with the EPR derived quantities. Magnetism in gold nanoclusters is thus demonstrated to be the outcome of a very delicate balance of factors. To obtain reproducible results, the samples must be (i) controlled for composition and thus be monodispersed with atomic precision, (ii) of known charge state, and (iii) well defined also in terms of crystallinity and experimental conditions. This study highlights the efficacy of EPR spectroscopy to provide a molecular understanding of these phenomena

  5. Alkanetelluroxide-protected gold nanoparticles.

    Science.gov (United States)

    Li, Ying; Silverton, Latoya C; Haasch, Richard; Tong, Yu Ye

    2008-07-15

    The synthesis and characterization of the first air-stable tellurium-containing ligand-protected gold nanoparticles (NPs) are reported. Although the synthesis largely followed the well-known Brust two-phase approach, the starting ligand was dioctyl ditelluride rather than alkanetellurol, which is an analogue of the widely used alkanethiol. Dioctyl ditelluride was used because alkanetellurol is unstable. The 1H and 13C NMR spectra, as well as infrared spectra (IR) of the formed Au NPs, indicated that the Te-Te bond in the starting ligand was broken but the octyl group was intact. This was further corroborated by the solid-state 125Te NMR spectrum that displayed a very broad and significantly downfield-shifted peak, indicating that tellurium was directly bound to the Au core. Furthermore, the O 1s and Te 3d XPS spectra of the Au NPs indicated that the capping ligands were octanetelluroxide. An average particle size of 2.7 nm diameter as measured by transmission electron microscopy (TEM) corresponded to an Au607 core. A two-step weight loss of approximately 22.2% in total was observed in the thermogravimetric analysis, which indicated about 53% ligand monolayer coverage (i.e., Au607(Te(=O)C8H17)133). Additionally, dioctyl ditelluride demonstrated an intriguing reductive power that led to a more sophisticated chemistry of forming the air-stable octanetelluroxide-protected gold NPs. It has been found that (1) when the ratio of Au to Te was about 1.5 a colorless intermediate state similar to Au(I)-SR (the intermediate state widely accepted in the synthesis of thiolate-protected Au NPs) could be obtained and (2) this kind of intermediate state played a key role in the formation of stable Au NPs.

  6. NUCLEATION STUDIES OF GOLD ON CARBON ELECTRODES

    Directory of Open Access Journals (Sweden)

    S. SOBRI

    2008-04-01

    Full Text Available Interest has grown in developing non-toxic electrolytes for gold electrodeposition to replace the conventional cyanide-based bath for long term sustainability of gold electroplating. A solution containing thiosulphate and sulphite has been developed specially for microelectronics applications. However, at the end of the electrodeposition process, the spent electrolyte can contain a significant amount of gold in solution. This study has been initiated to investigate the feasibility of gold recovery from a spent thiosulphate-sulphite electrolyte. We have used flat-plate glassy carbon and graphite electrodes to study the mechanism of nucleation and crystal growth of gold deposition from the spent electrolyte. It was found that at the early stages of reduction process, the deposition of gold on glassy carbon exhibits an instantaneous nucleation of non-overlapping particles. At longer times, the particles begin to overlap and the deposition follows a classic progressive nucleation phenomenon. On the other hand, deposition of gold on graphite does not follow the classical nucleation phenomena.

  7. Nature vs. nurture: gold perpetuates "stemness".

    Science.gov (United States)

    Paul, Willi; Sharma, Chandra P; Deb, Kaushik Dilip

    2011-01-01

    Adult tissues contain quiescent reservoirs of multipotent somatic stem cells and pluripotent embryonic-like stem cells (ELSCs). Credited with regenerative properties gold is used across both -contemporary and -ancient medicines. Here, we show that gold exerted these effects by enhancing the pool of pluripotent ELSC while improving their stemness. We used hESCs as an in-vitro model to understand if gold could enhance self-renewal and pluripotency. Swarna-bhasma (SB), an ancient Indian gold microparticulate (41.1 nm), preparation, reduced spontaneous-differentiation, improved self-renewal, pluripotency and proliferation of hESCs. Colloidal gold-nanoparticles (GNP) (15.59 nm) were tested to confirm that the observations were attributable to nanoparticulate-gold. SB and GNP exposure: maintained -stemness, -karyotypic stability, enhanced pluripotency till day-12, increased average colony-sizes, and reduced the number of autonomously-derived differentiated FGFR1 positive fibroblast-niche-cells/colony. Particulate-gold induced upregulation of FGFR1 and IGF2 expression, and decrease in IGF1 secretion indicates IGF1/2 mediated support for enhanced pluripotency and self-renewal in hESCs.

  8. Accumulation of Gold Nanoparticles in Brassic Juncea

    Energy Technology Data Exchange (ETDEWEB)

    Marshall, A.T.; Haverkamp, R.G.; Davies, C.E.; Parsons, J.G.; Gardea-Torresdey, J.L.; Agterveld, D.van

    2009-06-03

    Enzymatic digestion is proposed as a method for concentrating gold nanoparticles produced in plants. The mild conditions of digestion are used in order to avoid an increase in the gold particle size, which would occur with a high-temperature process, so that material suitable for catalysis may be produced. Gold nanoparticles of a 5-50-nm diameter, as revealed by transmission electron microscopy (TEM), at concentrations 760 and 1120 ppm Au, were produced within Brassica juncea grown on soil with 22-48 mg Au kg{sup -1}. X-ray absorption near edge spectroscopy (XANES) reveals that the plant contained approximately equal quantities of Au in the metallic (Au{sup 0}) and oxidized (Au{sup +1}) states. Enzymatic digestion dissolved 55-60 wt% of the plant matter. Due to the loss of the soluble gold fraction, no significant increase in the total concentration of gold in the samples was observed. However, it is likely that the concentration of the gold nanoparticles increased by a factor of two. To obtain a gold concentration suitable for catalytic reactions, around 95 wt% of the starting dry biomass would need to be solubilized or removed, which has not yet been achieved.

  9. Accumulation of gold nanoparticles in Brassic juncea.

    Science.gov (United States)

    Marshall, Aaron T; Haverkamp, Richard G; Davies, Clive E; Parsons, Jason G; Gardea-Torresdey, Jorge L; van Agterveld, Dimitri

    2007-01-01

    Enzymatic digestion is proposed as a method for concentrating gold nanoparticles produced in plants. The mild conditions of digestion are used in order to avoid an increase in the gold particle size, which would occur with a high-temperature process, so that material suitable for catalysis may be produced. Gold nanoparticles of a 5-50-nm diameter, as revealed by transmission electron microscopy (TEM), at concentrations 760 and 1120 ppm Au, were produced within Brassica juncea grown on soil with 22-48 mg Au kg(-1). X-ray absorption near edge spectroscopy (XANES) reveals that the plant contained approximately equal quantities of Au in the metallic (Au0) and oxidized (Au+1) states. Enzymatic digestion dissolved 55-60 wt% of the plant matter. Due to the loss of the soluble gold fraction, no significant increase in the total concentration of gold in the samples was observed. However, it is likely that the concentration of the gold nanoparticles increased by a factor of two. To obtain a gold concentration suitable for catalytic reactions, around 95 wt% of the starting dry biomass would need to be solubilized or removed, which has not yet been achieved.

  10. Gold nanoparticles produced in a microalga

    Science.gov (United States)

    Luangpipat, Tiyaporn; Beattie, Isabel R.; Chisti, Yusuf; Haverkamp, Richard G.

    2011-12-01

    An efficient biological route to production of gold nanoparticles which allows the nanoparticles to be easily recovered remains elusive. Live cells of the green microalga Chlorella vulgaris were incubated with a solution of gold chloride and harvested by centrifugation. Nanoparticles inside intact cells were identified by transmission electron microscopy and confirmed to be metallic gold by synchrotron based X-ray powder diffraction and X-ray absorption spectroscopy. These intracellular gold nanoparticles were 40-60 nm in diameter. At a concentration of 1.4% Au in the alga, a better than 97% recovery of the gold from solution was achieved. A maximum of 4.2% Au in the alga was obtained. Exposure of C. vulgaris to solutions containing dissolved salts of palladium, ruthenium, and rhodium also resulted in the production of the corresponding nanoparticles within the cells. These were surmised to be also metallic, but were produced at a much lower intracellular concentration than achieved with gold. Iridium was apparently toxic to the alga. No nanoparticles were observed using platinum solutions. C. vulgaris provides a possible route to large scale production of gold nanoparticles.

  11. Gel Electrophoresis of Gold-DNA Nanoconjugates

    Directory of Open Access Journals (Sweden)

    T. Pellegrino

    2007-01-01

    Full Text Available Gold-DNA conjugates were investigated in detail by a comprehensive gel electrophoresis study based on 1200 gels. A controlled number of single-stranded DNA of different length was attached specifically via thiol-Au bonds to phosphine-stabilized colloidal gold nanoparticles. Alternatively, the surface of the gold particles was saturated with single stranded DNA of different length either specifically via thiol-Au bonds or by nonspecific adsorption. From the experimentally determined electrophoretic mobilities, estimates for the effective diameters of the gold-DNA conjugates were derived by applying two different data treatment approaches. The first method is based on making a calibration curve for the relation between effective diameters and mobilities with gold nanoparticles of known diameter. The second method is based on Ferguson analysis which uses gold nanoparticles of known diameter as reference database. Our study shows that effective diameters derived from gel electrophoresis measurements are affected with a high error bar as the determined values strongly depend on the method of evaluation, though relative changes in size upon binding of molecules can be detected with high precision. Furthermore, in this study, the specific attachment of DNA via gold-thiol bonds to Au nanoparticles is compared to nonspecific adsorption of DNA. Also, the maximum number of DNA molecules that can be bound per particle was determined.

  12. Phytomining for Artisanal Gold Mine Tailings Management

    Directory of Open Access Journals (Sweden)

    Baiq Dewi Krisnayanti

    2016-08-01

    Full Text Available Mine tailings are generally disposed of by artisanal and small scale gold miners in poorly constructed containment areas and this leads to environmental risk. Gold phytomining could be a possible option for tailings management at artisanal and small-scale gold mining (ASGM locations where plants accumulate residual gold in their above ground biomass. The value of metal recovered from plants could offset some of the costs of environmental management. Getting gold into plants has been repeatedly demonstrated by many research groups; however, a simple working technology to get gold out of plants is less well described. A field experiment to assess the relevance of the technology to artisanal miners was conducted in Central Lombok, Indonesia between April and June 2015. Tobacco was planted in cyanidation tailings (1 mg/kg gold and grown for 2.5 months before the entire plot area was irrigated with NaCN to induce metal uptake. Biomass was then harvested (100 kg, air dried, and ashed by miners in equipment currently used to ash activated carbon at the end of a cyanide leach circuit. Borax and silver as a collector metal were added to the tobacco ash and smelted at high temperature to extract metals from the ash. The mass of the final bullion (39 g was greater than the mass of silver used as a collector (31 g, indicating recovery of metals from the biomass through the smelt process. The gold yield of this trial was low (1.2 mg/kg dry weight biomass concentration, indicating that considerable work must still be done to optimise valuable metal recovery by plants at the field scale. However, the described method to process the biomass was technically feasible, and represents a valid technique that artisanal and small-scale gold miners are willing to adopt if the economic case is good.

  13. Carbon nanotubes randomly decorated with gold clusters: from nano{sup 2}hybrid atomic structures to gas sensing prototypes

    Energy Technology Data Exchange (ETDEWEB)

    Charlier, J-C; Zanolli, Z [Unite de Physico-Chimie et de Physique des Materiaux (PCPM), European Theoretical Spectroscopy Facility (ETSF), Universite Catholique de Louvain, Place Croix du Sud 1, B-1348 Louvain-la-Neuve (Belgium); Arnaud, L; Avilov, I V; Felten, A; Pireaux, J-J [Centre de Recherche en Physique de la Matiere et du Rayonnement (PMR-LISE), Facultes Universitaires Notre-Dame de la Paix, 61 Rue de Bruxelles, B-5000 Namur (Belgium); Delgado, M [Sensotran, s.l., Avenida Remolar 31, E-08820 El Prat de Llobregat, Barcelona (Spain); Demoisson, F; Reniers, F [Service de Chimie Analytique et Chimie des Interfaces (CHANI), Universite Libre de Bruxelles, Faculte des Sciences, CP255, Boulevard du Triomphe 2, B-1050 Bruxelles (Belgium); Espinosa, E H; Ionescu, R; Leghrib, R; Llobet, E [Department of Electronic Engineering, Universitat Rovira i Virgili, Avenida Paisos Catalans 26, E-43007 Tarragona (Spain); Ewels, C P; Suarez-Martinez, I [Institut des Materiaux Jean Rouxel (IMN), Universite de Nantes, 2 rue de la Houssiniere-BP 32229, F-44322 Nantes Cedex 3 (France); Guillot, J; Mansour, A; Migeon, H-N [Departement Science et Analyse des Materiaux, Centre de Recherche Public-Gabriel Lippmann, rue du Brill 41, L-4422 Belvaux (Luxembourg); Watson, G E, E-mail: jean-jacques.pireaux@fundp.ac.b [Vega Science Trust, Unit 118, Science Park SQ, Brighton, BN1 9SB (United Kingdom)

    2009-09-16

    Carbon nanotube surfaces, activated and randomly decorated with metal nanoclusters, have been studied in uniquely combined theoretical and experimental approaches as prototypes for molecular recognition. The key concept is to shape metallic clusters that donate or accept a fractional charge upon adsorption of a target molecule, and modify the electron transport in the nanotube. The present work focuses on a simple system, carbon nanotubes with gold clusters. The nature of the gold-nanotube interaction is studied using first-principles techniques. The numerical simulations predict the binding and diffusion energies of gold atoms at the tube surface, including realistic atomic models for defects potentially present at the nanotube surface. The atomic structure of the gold nanoclusters and their effect on the intrinsic electronic quantum transport properties of the nanotube are also predicted. Experimentally, multi-wall CNTs are decorated with gold clusters using (1) vacuum evaporation, after activation with an RF oxygen plasma and (2) colloid solution injected into an RF atmospheric plasma; the hybrid systems are accurately characterized using XPS and TEM techniques. The response of gas sensors based on these nano{sup 2}hybrids is quantified for the detection of toxic species like NO{sub 2}, CO, C{sub 2}H{sub 5}OH and C{sub 2}H{sub 4}.

  14. The giant Kalgoorlie Gold Field revisited

    Directory of Open Access Journals (Sweden)

    Noreen Mary Vielreicher

    2016-05-01

    Direct timing constraints on gold mineralization indicate that Fimiston- and Mt Charlotte-style mineralization formed within a relative short period of time around 2.64 Ga, and, as such, support a model of progressive deformation of a rheologically heterogeneous rock package late in the structural history. Fluid characteristics, combined with the structural, metamorphic and absolute timing, support description of gold mineralization at the Golden Mile as orogenic and mesozonal, and this allows direct correlation with orogenic gold deposits worldwide, which classically formed during accretion along convergent margins throughout Earth history.

  15. Gold Photoluminescence Wavelength and Polarization Engineering

    CERN Document Server

    Andersen, Sebastian K H; Bozhevolnyi, Sergey I

    2016-01-01

    We demonstrate engineering of the spectral content and polarization of photoluminescence (PL) from arrayed gold nanoparticles atop a subwavelength-thin dielectric spacer and optically-thick gold film, a configuration that supports gap-surface plasmon resonances (GSPRs). Choice of shapes and dimensions of gold nanoparticles influences the GSPR wavelength and polarization characteristics, thereby allowing us to enhance and spectrally mold the plasmon-assisted PL while simultaneously controlling its polarization. In order to understand the underlying physics behind the plasmon-enhanced PL, we develop a simple model that faithfully reproduces all features observed in our experiments showing also good quantitative agreement for the PL enhancement

  16. Gold versus stock investment: An econometric analysis

    Directory of Open Access Journals (Sweden)

    Martin Surya Mulyadi

    2012-06-01

    Full Text Available It is important to have a portfolio in investment to diversify the investment to different kinds of instruments. Based on previous research, it is concluded that gold is a good portfolio diversifier, a hedge against stock and safe haven in extreme stock market condition. As an investment instrument, stock is exposed to macroeconomic risks and global stock market risks. In this research, we conduct a comparison between the stock investment and gold investment by using the probit econometric model and data from 1997 to 2011. The final result obtained from the model shows that the gold investment is more advantageous than the stock investment.

  17. Resonance scattering spectroscopy of gold nanoparticle

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The gold nanoparticles in diameter of 10-95 nm have been prepared by Frens procedure, all of which exhibit a resonance scattering peak at 580 nm. The mechanism of resonance scattering for gold nanoparticle has been considered according to the wave motion theory of nanoparticle in liquid. The principle of superamolecular interface energy band(SIEB) has been set up and utilized to explain the relationship between the diameter and colors for gold nanoparticle in liquid. A novel spectrophotometric ruler for the determination of the diameter has been proposed according to the relationship of the maximum absorption wavelength and diameter.

  18. Mechanical characterization of a single gold nanowire.

    Science.gov (United States)

    Chang, Ming; Liu, Xiaojun; Chang, Feng-Cheng; Deka, Juti R

    2013-08-01

    Mechanical properties of gold nanowires were individually determined in this investigation using a multifunctional nanomanipulator inside a scanning electron microscope (SEM). Gold nanowires were synthesized by an electrochemical deposition technique. Three different characterization techniques including tensile, buckling and bending tests were adapted to quantitatively determine Young's modulus, yield stress and failure stress of the gold nanowires. The mechanical characterizations show that the nanowires were highly flexible in nature. The excellent resilience and the ability to store elastic energy in these nanowires confirm their potential applications in nano electromechanical devices.

  19. Designing hollow nano gold golf balls.

    Science.gov (United States)

    Landon, Preston B; Mo, Alexander H; Zhang, Chen; Emerson, Chris D; Printz, Adam D; Gomez, Alan F; DeLaTorre, Christopher J; Colburn, David A M; Anzenberg, Paula; Eliceiri, Matthew; O'Connell, Connor; Lal, Ratnesh

    2014-07-09

    Hollow/porous nanoparticles, including nanocarriers, nanoshells, and mesoporous materials have applications in catalysis, photonics, biosensing, and delivery of theranostic agents. Using a hierarchical template synthesis scheme, we have synthesized a nanocarrier mimicking a golf ball, consisting of (i) solid silica core with a pitted gold surface and (ii) a hollow/porous gold shell without silica. The template consisted of 100 nm polystyrene beads attached to a larger silica core. Selective gold plating of the core followed by removal of the polystyrene beads produced a golf ball-like nanostructure with 100 nm pits. Dissolution of the silica core produced a hollow/porous golf ball-like nanostructure.

  20. Gold in the past, today and future

    OpenAIRE

    Rudolf, R; Anžel, M.; Marković, E.; M. Čolić; D. Stamenković

    2012-01-01

    This paper deals with gold, which is described as a chemical element. Special attention is paid to its physical-chemical properties and, furthermore, where or in what form it can be found in nature. We discuss the role it has played through history and we inform how gold has been developed to the level it has reached today’s value. Still more, when gold is broken into nanoparticles, this form could be highly useful for a wide range of processes, including general nanotechnology, electronics m...

  1. 33 CFR 13.01-10 - Gold and silver bars.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Gold and silver bars. 13.01-10... DECORATIONS, MEDALS, RIBBONS AND SIMILAR DEVICES Gold and Silver Lifesaving Medals, Bars, and Miniatures § 13.01-10 Gold and silver bars. No person shall receive more than one Gold Lifesaving Medal and...

  2. Gold deposit styles and placer gold characterisation in northern and east-central Madagascar

    Science.gov (United States)

    Pitfield, Peter E. J; Styles, Michael T.; Taylor, Cliff D.; Key, Roger M.; Bauer,; Ralison, A

    2009-01-01

    Microchemical characterisation of bedrock and placer gold grains from six gold districts within the Archaean domains and intervening Neoproterozoic Anaboriana-Manampotsy belt of northern and east-central Madagascar show few opaque inclusions (e.g pyrrhotite, Bi tellurides) but wide range of Ag contents (40wt%). Some districts exhibit multiple source populations of grains. The ‘greenstone belt’ terranes have an orogenic gold signature locally with an intrusion-related to epithermal overprint. Proterozoic metasediments with felsic to ultramafic bodies yield dominantly intrusion-related gold. A high proportion of secondary gold (<0.5wt% Ag) is related to recycling of paleoplacers and erosion of post-Gondwana planation surfaces and indicates that some mesothermal gold systems were already partially to wholly removed by erosion by the PermoTriassic.

  3. Self-Assembled Two-Dimensional Array of Gold Nanoparticles with Different Size for the Sensing Application

    Science.gov (United States)

    Li, Wan-Chao; Park, Sang-Eun; Kim, Jongsung; Lee, Sang-Wha

    2009-06-01

    Self-assembled two-dimensional array of gold nanoparticles (GNPs) on the glass substrate was systematically investigated in terms of glass cleaning, K2CO3 addition, GNP size, and pH of gold colloids. An ambient-air plasma treatment produced a highly-activated glass surface with the lowest air/water contact angles and K2CO3 addition is very effective to preserve the optical properties of gold nanoparticles for a long time. Small GNPs (≤40 nm) was uniformly arrayed on the amine-functionalized glass through the optimization process of electrostatic attractions between positively-charged glass and negatively-charged gold nanoparticles. For large GNPs (≥50 nm) that resulted in discrete (or loosely-packed) array on the glass substrate, pH adjustment of gold colloids (from pH 11 to 9) produced more densely-packed array of GNPs with less void areas, probably due to the reduction of electrostatic repulsion forces between large gold nanoparticles.

  4. Uptake and recovery of gold by immobilized persimmon tannin.

    Science.gov (United States)

    Nakajima, A; Sakaguchi, T

    1993-01-01

    Some attempts were made to recover gold from aqueous systems using immobilized persimmon tannin. This adsorbent adsorbed gold from solutions containing hydrogen tetrachloroaurate (III) with high efficiency, whereas there was minimal adsorption from solutions containing gold(I) sodium thiomalate and sodium dicyanoaurate(I). The adsorption of gold was rapid, and was affected by the pH of the solution, temperature, external gold concentration and amount of adsorbent. Adsorbed gold was easily desorbed with 1 mol dm-3 thiourea solution, indicating that immobilized persimmon tannin can be repeatedly re-used for the recovery of gold using adsorption-desorption cycles.

  5. Gold nanodumbbell-seeded growth of silver nanobars and nanobipyramids

    Science.gov (United States)

    Deng, Jin-Pei; Chen, Chih-Wei; Hsieh, Wei-Chi; Wang, Chao-Hsien; Hsu, Cheng-Yung; Lin, Jyun-Hao

    2014-03-01

    Gold nanodumbbells (NDs) are prepared by the reduction of gold ions in the presence of gold nanorods. Gold NDs are then employed for the synthesis of gold-silver core-shell nanoparticles (Au@Ag NPs). The quasi-ellipsoidal NPs could be found at room temperature, but Au@Ag bar and triangular bipyramid (TBP) NPs were obtained at 75 °C. Our results show that the long ends of gold NDs are in the position of the bar center and closely paralleled the shorter edge of TBP. Mechanisms in the growth of silver on gold NDs are proposed for the formations of these Au@Ag NPs.

  6. Plasma chromograninx

    DEFF Research Database (Denmark)

    Goetze, Jens P; Hilsted, Linda M; Rehfeld, Jens F

    2014-01-01

    Cardiovascular risk assessment remains difficult in elderly patients. We examined whether chromogranin A (CgA) measurement in plasma may be valuable in assessing risk of death in elderly patients with symptoms of heart failure in a primary care setting. A total of 470 patients (mean age 73 years......) were followed for 10 years. For CgA plasma measurement, we used a two-step method including a screening test and a confirmative test with plasma pre-treatment with trypsin. Cox multivariable proportional regression and receiver-operating curve (ROC) analyses were used to assess mortality risk...... of follow-up showed significant additive value of CgA confirm measurements compared with NT-proBNP and clinical variables. CgA measurement in the plasma of elderly patients with symptoms of heart failure can identify those at increased risk of short- and long-term mortality....

  7. Plasma Cleaning

    Science.gov (United States)

    Hintze, Paul E.

    2016-01-01

    NASA's Kennedy Space Center has developed two solvent-free precision cleaning techniques: plasma cleaning and supercritical carbon dioxide (SCCO2), that has equal performance, cost parity, and no environmental liability, as compared to existing solvent cleaning methods.

  8. Source Strata of Gold in Western Guangdong—Their Identification and Significance in Gold Mineralization

    Institute of Scientific and Technical Information of China (English)

    陆建军; 吴劲薇; 等

    1995-01-01

    Strata of different geological periods extensively outcrop in western Guang-dong Province, but most gold deposits are restricted to the Middle-Late Proterozoic Yunkai Group and the Cambrian Bacun Group,showing obvious strata-boun character-istics .Gold abundance and trace element geochemistry of the Yunkai and Bacun Groups are compared with those of the Ordovician and Silurian strta.The Yunkai Group is considered to be the source strata for gold mineralization in the region.

  9. Plasma confinement

    CERN Document Server

    Hazeltine, R D

    2003-01-01

    Detailed and authoritative, this volume examines the essential physics underlying international research in magnetic confinement fusion. It offers readable, thorough accounts of the fundamental concepts behind methods of confining plasma at or near thermonuclear conditions. Designed for a one- or two-semester graduate-level course in plasma physics, it also represents a valuable reference for professional physicists in controlled fusion and related disciplines.

  10. Gold revolution--gold nanoparticles for modern medicine and surgery.

    Science.gov (United States)

    Rippel, Radoslaw A; Seifalian, Alexander M

    2011-05-01

    Nanotechnology is a new and exciting branch of science which offers enormous potential for development of medicine and surgery. Gold nanoparticles (GNP) is just one of a variety of nano products which will be available for physician of the future. GNP will give us more effective treatments and diagnosis. We are able to conjugate GNP with peptides, drugs, and other molecules to gain astonishing effects. High quality, non-invasive imaging will inevitably lead to astonishing accuracy diagnostic tools with effective use during surgery. The same principles may be used in the future for drug delivery and thermal treatment of cancer. Detailed DNA detection and regulation may become everyday use technology, in medicine with support from GNP based tools. Bacterial diagnostics and nerve repair are relatively poorly researched areas of application of GNP with possibly astonishing therapeutic effects. Non-invasive clearance of arteriosclerotic plagues with GNP shows a great prospect for further development of minimally invasive surgery. However, before all of those tools will become available for clinicians, in depth toxicology research as well as transitional research and design have to be done to ensure safe clinical practice with maximal benefit for patients.

  11. Structural controls on Carlin-type gold mineralization in the gold bar district, Eureka County, Nevada

    Science.gov (United States)

    Yigit, O.; Nelson, E.P.; Hitzman, M.W.; Hofstra, A.H.

    2003-01-01

    The Gold Bar district in the southern Roberts Mountains, 48 km northwest of Eureka, Nevada, contains one main deposit (Gold Bar), five satellite deposits, and other resources. Approximately 0.5 Moz of gold have been recovered from a resource of 1,639,000 oz of gold in Carlin-type gold deposits in lower plate, miogeoclinal carbonate rocks below the Roberts Mountains thrust. Host rocks are unit 2 of the Upper Member of the Devonian Denay Formation and the Bartine Member of the McColley Canyon Formation. Spatial and temporal relations between structures and gold mineralization indicate that both pre-Tertiary and Tertiary structures were important controls on gold mineralization. Gold mineralization occurs primarily along high-angle Tertiary normal faults, some of which are reactivated reverse faults of Paleozoic or Mesozoic age. Most deposits are localized at the intersection of northwest- and northeast-striking faults. Alteration includes decalcification, and to a lesser extent, silicification along high-angle faults. Jasperoid (pervasive silicification), which formed along most faults and in some strata-bound zones, accounts for a small portion of the ore in every deposit. In the Gold Canyon deposit, a high-grade jasperoid pipe formed along a Tertiary normal fault which was localized along a zone of overturned fault-propagation folds and thrust faults of Paleozoic or Mesozoic age.

  12. Direct formation of gold nanorods on surfaces using polymer-immobilised gold seeds

    OpenAIRE

    Abyaneh, Majid K; Pietro Parisse; Loredana Casalis

    2016-01-01

    Herein, we present the formation of gold nanorods (GNRs) on novel gold–poly(methyl methacrylate) (Au–PMMA) nanocomposite substrates with unprecedented growth control through the polymer molecular weight (Mw) and gold-salt-to-polymer weight ratio. For the first time, GNRs have been produced by seed-mediated direct growth on surfaces that were pre-coated with polymer-immobilised gold seeds. A Au–PMMA nanocomposite formed by UV photoreduction has been used as the gold seed. The influence of poly...

  13. Epithermal Gold Mineralization in Chinese Tianshan Province

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Tianshan is a part of the complex system of orogenic belts of Phanerozoic in Central Asia. In the northwestern Chinese Tianshan, Borohoro range, the major metallogenic belt in this area is situated between the Yili block and Keguqinshan-Sairim uplift. The intra-arc basins resulting from southward subduction of the Junggar plate and accompanying volcanism are the essential factors for the formation of the hydrothermal system that caused gold mineralization. The adularia-sericite-style epithermal Arxi gold deposit formed in an extensional tectonic setting. In the eastern Tianshan, post-orogenic magmatism resulted in a hydrothermai system that produced the epithermai Xitan gold deposit. Both gold deposits are related to local extensional setting, although differences exist in their timing and location.

  14. Adsorption-induced restructuring of gold nanochains

    DEFF Research Database (Denmark)

    Bahn, Sune Rastad; Lopez, Nuria; Nørskov, Jens Kehlet;

    2002-01-01

    The chemical properties of single-atomic chains of gold atoms are investigated using density functional calculations. The nanochains are shown to be unusually chemically active with strong chemisorption of oxygen atoms and carbon monoxide. The chemisorption energies vary significantly...

  15. Preparation of Gold Nanoparticles Protected with Polyelectrolyte

    Institute of Scientific and Technical Information of China (English)

    Xu Ping SUN; Zhe Ling ZHANG; Bai Lin ZHANG; Xian Dui DONG; Shao Jun DONG; Er Kang WANG

    2003-01-01

    Gold nanoparticles were synthesized through the reduction of tetrachlorauric acid (HAuCl4) by NaBH4, with polyethyleneimine(PEI) as stabilizer. The nanoparticles were characterized by UV-vis spectroscopy and atomic force microscopy(AFM).

  16. Gold in the past, today and future

    Directory of Open Access Journals (Sweden)

    R. Rudolf

    2012-04-01

    Full Text Available This paper deals with gold, which is described as a chemical element. Special attention is paid to its physical-chemical properties and, furthermore, where or in what form it can be found in nature. We discuss the role it has played through history and we inform how gold has been developed to the level it has reached today’s value. Still more, when gold is broken into nanoparticles, this form could be highly useful for a wide range of processes, including general nanotechnology, electronics manufacturing and the synthesizing of different functional materials. It is important that we know that gold is also used in industry in many engineering applications (contacts in micro-electronics and medicine (dental alloys, implants.

  17. Stabilizer-free nanosized gold sols.

    Science.gov (United States)

    Andreescu, Daniel; Sau, Tapan Kumar; Goia, Dan V

    2006-06-15

    The paper describes a convenient, rapid, and reproducible method for the synthesis of stable dispersions of uniform gold nanoparticles at ambient temperatures by mixing aqueous solutions of tetrachloroauric acid and iso-ascorbic acid. The influence of the experimental conditions on the size of the gold particles and the stability of the final sols was monitored by dynamic light scattering and UV-vis spectrophotometry. It was found that the size of the resulting nanoparticles is affected by the concentration and the pH of gold solution, while the stability of the electrostatically stabilized final sols is strongly dependent on the excess of reductant in the system, the ionic strength, and the temperature of the precipitation. Since the preparation process does not require the addition of a dispersing agent, the surface of the resulting gold nanoparticles can be easily functionalized to make them suitable for applications in medicine, biology, and catalysis.

  18. Willingness to Open Islamic Gold Investment Accounts

    National Research Council Canada - National Science Library

    Hanudin Amin

    2016-01-01

    .... This study extends the applicability of the Theory of Reasoned Action (TRA) to Islamic gold investment accounts and includes three additional factors namely perceived financial benefit, consumer religiosity and consumer information...

  19. Alaska gold rush trails study: Preliminary draft

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Preliminary study draft, with maps, of seven gold rush trails in Alaska, to determine suitability for inclusion in the National Scenic Trails system and their...

  20. Deep gold mine fracture zone behaviour

    CSIR Research Space (South Africa)

    Napier, JAL

    1998-12-01

    Full Text Available The investigation of the behaviour of the fracture zone surrounding deep level gold mine stopes is detailed in three main sections of this report. Section 2 outlines the ongoing study of fundamental fracture process and their numerical...

  1. Is Farmland As Good As Gold?

    Directory of Open Access Journals (Sweden)

    Marvin J. Painter

    2011-01-01

    Full Text Available An analysis of Canadian farmland risk and its return on investment shows that a Farmland Real Estate Investment Trust (F-REIT and gold would have significantly enhanced portfolio performance over the past 35 years. Investors who desire low-risk portfolios would not have benefited from an F-REIT or gold investment. However, investors in the medium-risk category could have improved the financial performance of their portfolios by including an F-REIT investment rather than gold. The financial gains from F-REIT result from a level of risk that is lower than gold, REITs, and stocks, an expected yield that is greater than for bonds, and a low correlation with other financial asset returns.

  2. Interaction of Saccharomyces cerevisiae with gold: toxicity and accumulation.

    Science.gov (United States)

    Karamushka, V I; Gadd, G M

    1999-12-01

    This paper examines the effects of ionic gold on Saccharomyces cerevisiae, as determined by long-term (growth in gold-containing media) and short-term interactions (H+ efflux activity). An increasing gold concentration inhibited growth and at gold concentration used. Both Ca and Mg enhanced the inhibitory effect of gold on the yeast cells with Ca showing a stronger inhibitory effect than Mg.

  3. The Modern Monetary System and Gold

    Directory of Open Access Journals (Sweden)

    N N Rubtsov

    2013-12-01

    Full Text Available The article considers the nature of modern money, analyzes the mechanism of its creation, showing that it is basically generated by credit and the principle of partial bank reserve. The article draws comparative parallels between trade money based on gold and contemporary, credit money; the author quotes leading bankers and finance experts on the need for partial return to the principles of functioning of the gold standard as the most effective institute of regulating the monetary system in society.

  4. Silver and gold-catalyzed multicomponent reactions

    Directory of Open Access Journals (Sweden)

    Giorgio Abbiati

    2014-02-01

    Full Text Available Silver and gold salts and complexes mainly act as soft and carbophilic Lewis acids even if their use as σ-activators has been rarely reported. Recently, transformations involving Au(I/Au(III-redox catalytic systems have been reported in the literature. In this review we highlight all these aspects of silver and gold-mediated processes and their application in multicomponent reactions.

  5. PIXE analysis of Trojan gold jewelry

    Science.gov (United States)

    Swann, C. P.; Betancourt, P. P.; Fleming, S.; Floyd, C. R.

    1997-07-01

    Technological advancements in the production of gold jewelry from the Troad in northwest Anatolia in the third millennium BC are investigated by PIXE. Results indicate a higher percentage of Cu at the interface between joined pieces of gold than exists elsewhere on the jewelry, away from joinings. The results indicate the probable use of copper salts as a flux in the manufacture of jewelry with granulation.

  6. Nonlinear photoluminescence spectrum of single gold nanostructures.

    Science.gov (United States)

    Knittel, Vanessa; Fischer, Marco P; de Roo, Tjaard; Mecking, Stefan; Leitenstorfer, Alfred; Brida, Daniele

    2015-01-27

    We investigate the multiphoton photoluminescence characteristics of gold nanoantennas fabricated from single crystals and polycrystalline films. By exciting these nanostructures with ultrashort pulses tunable in the near-infrared range, we observe distinct features in the broadband photoluminescence spectrum. By comparing antennas of different crystallinity and shape, we demonstrate that the nanoscopic geometry of plasmonic devices determines the shape of the emission spectra. Our findings rule out the contribution of the gold band structure in shaping the photoluminescence.

  7. Radiochemical separation of gold by amalgam exchange

    Science.gov (United States)

    Ruch, R.R.

    1970-01-01

    A rapid and simple method for the radiochemical separation of gold after neutron activation. The technique is based on treatment with a dilute indium-gold amalgam, both chemical reduction and isotopic exchange being involved. The counting efficiency for 198Au in small volumes of the amalgam is good. Few interferences occur and the method is applicable to clays, rocks, salts and metals. The possibility of determining silver, platinum and palladium by a similar method is mentioned. ?? 1970.

  8. Optical Epitaxial Growth of Gold Nanoparticle Arrays.

    Science.gov (United States)

    Huang, Ningfeng; Martínez, Luis Javier; Jaquay, Eric; Nakano, Aiichiro; Povinelli, Michelle L

    2015-09-09

    We use an optical analogue of epitaxial growth to assemble gold nanoparticles into 2D arrays. Particles are attracted to a growth template via optical forces and interact through optical binding. Competition between effects determines the final particle arrangements. We use a Monte Carlo model to design a template that favors growth of hexagonal particle arrays. We experimentally demonstrate growth of a highly stable array of 50 gold particles with 200 nm diameter, spaced by 1.1 μm.

  9. Analysis on the Impact of the Fluctuation of the International Gold Prices on the Chinese Gold Stocks

    Directory of Open Access Journals (Sweden)

    Jiankang Jin

    2014-01-01

    Full Text Available Five gold stocks in Chinese Shanghai and Shenzhen A-share and Comex gold futures are chosen to form the sample, for the purpose of analysing the impact of the fluctuation of the international gold prices on the gold stocks in Chinese Shanghai and Shenzhen A-share. Using the methods of unit root test, Granger causality test, VAR model, and impulse response function, this paper has analysed the relationship between the price change of the international gold futures and the price fluctuation of gold stocks in Chinese Shanghai and Shenzhen comprehensively. The results suggest the fluctuation of the international gold futures has a strong influence on the domestic futures.

  10. Gold mobility during Palaeoarchaean submarine alteration

    Science.gov (United States)

    Hofmann, Axel; Pitcairn, Iain; Wilson, Allan

    2017-03-01

    Seafloor alteration provides large amounts of solutes to the hydrosphere. In order to investigate gold mobility during water-rock interaction prior to 3-billion-years ago, low detection limit analysis of Au concentrations was carried out on rocks from marine alteration zones. Stratiform zones recording low-temperature (≤150 °C) seafloor alteration are a characteristic feature of greenstone belts older than 3.0 Ga. Hydrothermal processes were operating on, and immediately below, the seafloor, giving rise to extensive silicification of sub-seafloor volcanic rocks and silicification of seafloor sediments. In order to investigate gold mobility during silicification, unaltered and variably silicified volcanic rocks and associated cherts from Palaeoarchaean greenstone successions (c. 3.4 Ga) of South Africa were analyzed. Results show mobility of gold during silicification of mafic/ultramafic rocks and transfer to the Archaean ocean. Some gold was incorporated into carbonaceous marine sediments overlying the alteration zones. A combination of pervasive silicification, rarity of black shales, and low gold content in komatiites can explain the low mineralization potential of Palaeoarchaean greenstone belts for orogenic gold deposits.

  11. The gold rush 1925-35.

    Science.gov (United States)

    Keers, R Y

    1980-12-01

    Although from the time of Koch onwards there had been desultory experiments with a variety of gold preparations in the management of pulmonary tuberculosis, gold as a recognised and accepted treatment did not emerge until 1925. In that year Holger Mollgaard of Copenhagen introduced sanocrysin, a double thiosulphate of gold and sodium, with which he had conducted an extensive series of animal experiments. The results of these were considered to justify its use in clinical practice and two physicians, Secher and Faber, undeterred by its toxicity, reported enthusiastically in its favour. Other Danish physicians followed but, alarmed by violent reactions, modified the dosage, an example followed by British workers. Encouraging results continued to be reported although each series contained a significant proportion of failures, and toxicity remained high. The first properly planned and fully controlled clinical trial took place in the United States and produced a report which was wholly adverse and which sounded the death knell of gold therapy throughout America. Until 1934-35 gold was used extensively in Europe but thereafter there was a sudden and largely universal cessation of interest and within a few years gold, introduced with such éclat and carrying so many high hopes, had vanished from the therapy of tuberculosis even though, at that point, no better alternative was available.

  12. Surface waves on a quantum plasma half-space

    CERN Document Server

    Lázár, M; Smolyakov, A

    2007-01-01

    Surface modes are coupled electromagnetic/electrostatic excitations of free electrons near the vacuum-plasma interface and can be excited on a sufficiently dense plasma half-space. They propagate along the surface plane and decay in either sides of the boundary. In such dense plasma models, which are of interest in electronic signal transmission or in some astrophysical applications, the dynamics of the electrons is certainly affected by the quantum effects. Thus, the dispersion relation for the surface wave on a quantum electron plasma half-space is derived by employing the quantum hydrodynamical (QHD) and Maxwell-Poison equations. The QHD include quantum forces involving the Fermi electron temperature and the quantum Bohm potential. It is found that, at room temperature, the quantum effects are mainly relevant for the electrostatic surface plasma waves in a dense gold metallic plasma.

  13. Gold grade distribution within an epithermal quartz vein system, Kestanelik, NW Turkey: implications for gold exploration

    Science.gov (United States)

    Gulyuz, Nilay; Shipton, Zoe; Gulyuz, Erhan; Lord, Richard; Kaymakci, Nuretdin; Kuscu, İlkay

    2017-04-01

    Vein-hosted gold deposits contribute a large part to the global gold production. Discovery of these deposits mainly include drilling of hundreds of holes, collecting thousands of soil and rock samples and some geophysical surveys which are expensive and time consuming. Understanding the structures hosting the veins and the variations in gold concentrations within the veins is crucial to constrain a more economic exploration program. The main aim of this study is to investigate the gold grade distribution in the mineralized quartz veins of a well exposed epithermal gold deposit hosted by Paleozoic schist and Eocene quartz-feldspar-hornblende porphyry in Lapseki, NW Turkey. We have constructed 3D architecture of the vein surfaces by mapping their outcrop geometries using a highly sensitive Trimble GPS, collecting detailed field data, well-logs and geochemistry data from 396 drill holes (255 diamond cut and 141 reverse circulation holes). Modelling was performed in MOVE Structural Modelling and Analysis software granted by Midland Valley's Academic Software Initiative, and GIS application softwares Global Mapper and Esri-ArcGIS. We envisaged that while fluid entering the conduit ascents, a sudden thickness increase in the conduit would lead to a drop in the fluid pressure causing boiling (the most dominant gold precipitation mechanism) and associated gold precipitation. Regression analysis was performed between the orthogonal thickness values and gold grades of each vein, and statistical analyses were performed to see if the gold is concentrated at specific structural positions along dip. Gold grades in the alteration zones were compared to those in the adjacent veins to understand the degree of mineralization in alteration zones. A possible correlation was also examined between the host rock type and the gold grades in the veins. These studies indicated that gold grades are elevated in the adjacent alteration zones where high gold grades exist in the veins. Schist

  14. Crystal structure of gold hydride

    Energy Technology Data Exchange (ETDEWEB)

    Degtyareva, Valentina F., E-mail: degtyar@issp.ac.ru

    2015-10-05

    Highlights: • Volume expansion of metal hydrides is due to the increase in the s-band filling. • AuH structure is similar to that of Hg having one more s electron compared to Au. • Structure stability of both Hg and AuH is governed by the Hume-Rothery rule. - Abstract: A number of transition metal hydrides with close-packed metal sublattices of fcc or hcp structures with hydrogen in octahedral interstitial positions were obtained by the high-pressure-hydrogen technique described by Ponyatovskii et al. (1982). In this paper we consider volume increase of metals by hydrogenation and possible crystal structure of gold hydride in relation with the structure of mercury, the nearest neighbor of Au in the Periodic table. Suggested structure of AuH has a basic tetragonal body-centered cell that is very similar to the mercury structure Hg-t I 2. The reasons of stability for this structure are discussed within the model of Fermi sphere–Brillouin zone interactions.

  15. Curcumin: the Indian solid gold.

    Science.gov (United States)

    Aggarwal, Bharat B; Sundaram, Chitra; Malani, Nikita; Ichikawa, Haruyo

    2007-01-01

    Turmeric, derived from the plant Curcuma longa, is a gold-colored spice commonly used in the Indian subcontinent, not only for health care but also for the preservation of food and as a yellow dye for textiles. Curcumin, which gives the yellow color to turmeric, was first isolated almost two centuries ago, and its structure as diferuloylmethane was determined in 1910. Since the time of Ayurveda (1900 Bc) numerous therapeutic activities have been assigned to turmeric for a wide variety of diseases and conditions, including those of the skin, pulmonary, and gastrointestinal systems, aches, pains, wounds, sprains, and liver disorders. Extensive research within the last half century has proven that most of these activities, once associated with turmeric, are due to curcumin. Curcumin has been shown to exhibit antioxidant, anti-inflammatory, antiviral, antibacterial, antifungal, and anticancer activities and thus has a potential against various malignant diseases, diabetes, allergies, arthritis, Alzheimer's disease, and other chronic illnesses. These effects are mediated through the regulation of various transcription factors, growth factors, inflammatory cytokines, protein kinases, and other enzymes. Curcumin exhibits activities similar to recently discovered tumor necrosis factor blockers (e.g., HUMIRA, REMICADE, and ENBREL), a vascular endothelial cell growth factor blocker (e.g., AVASTIN), human epidermal growth factor receptor blockers (e.g., ERBITUX, ERLOTINIB, and GEFTINIB), and a HER2 blocker (e.g., HERCEPTIN). Considering the recent scientific bandwagon that multitargeted therapy is better than monotargeted therapy for most diseases, curcumin can be considered an ideal "Spice for Life".

  16. [Sunrise gold foil jacket crown].

    Science.gov (United States)

    Lecardonnel, A

    1989-09-01

    This technique permits the preparation of ceramic jacket crowns made on Sunrise laminated precious metal alloy. The Sunrise foil is gold-colored, made of 99% of precious metals and is 50 microns thick. The die is prepared in order to display a moderate and regular undercut beyond the cervical limit. The margin will be underlined with a red pencil. The Sunrise foil is cut according to predetermined templates. Then the foil is applied without burnishing, according to the technique of jacket crowns on platinum foil only by finger pressure. The double folding on closure is preferably done distally or mesially. Then, the metal base is disinserted, sandblasted with 100 microns aluminum oxide, replaced on its die, and placed in a rubber casing before being placed in the isostatic press, to be subjected to a pressure of 2,000 TSI (14 kg par cm2). Sunrise's orange color reinforces rather subtetly the overall color, making these reconstructions particularly esthetic. The color of the Sunrise metal does not require, therefore a too thick opaque. Any ceramic intended to be fired on a metal base, may be used in respecting its firing protocol. Sunrise, as any other technique of this type, require a careful preparation with a shoulder that has a rounded gingivoaxial line angle. Bridges may be built on the "thimbles" crowns, fitted on Sunrise cores, the pontics being made as a ceramo-metal framework.

  17. A thermally stable gold(III) hydride: synthesis, reactivity, and reductive condensation as a route to gold(II) complexes.

    Science.gov (United States)

    Roşca, Dragoş-Adrian; Smith, Dan A; Hughes, David L; Bochmann, Manfred

    2012-10-15

    Going for gold: The first thermally stable gold(III) hydride [(C N C)*AuH] is presented. It undergoes regioselective insertions with allenes to give gold(III) vinyl complexes, and reductive condensation with [(C N C)*AuOH] to the air-stable Au(II) product, [(C N C)*(2)Au(2)], with a short nonbridged gold-gold bond.

  18. plasma treatment

    Directory of Open Access Journals (Sweden)

    Puač Nevena

    2014-11-01

    Full Text Available In this paper we will present results for plasma sterilization of planktonic samples of two reference strains of bacteria, Pseudomonas aeruginosa ATCC 27853 and Enterococcus faecalis ATCC 29212. We have used a plasma needle as a source of non-equilibrium atmospheric plasma in all treatments. This device is already well characterized by OES, derivative probes and mass spectrometry. It was shown that power delivered to the plasma is bellow 2 W and that it produces the main radical oxygen and nitrogen species believed to be responsible for the sterilization process. Here we will only present results obtained by electron paramagnetic resonance which was used to detect the OH, H and NO species. Treatment time and power delivered to the plasma were found to have the strongest influence on sterilization. In all cases we have observed a reduction of several orders of magnitude in the concentration of bacteria and for the longest treatment time complete eradication. A more efficient sterilization was achieved in the case of gram negative bacteria.

  19. Subchronic inhalation toxicity of gold nanoparticles

    Directory of Open Access Journals (Sweden)

    Chung Yong

    2011-05-01

    Full Text Available Abstract Background Gold nanoparticles are widely used in consumer products, including cosmetics, food packaging, beverages, toothpaste, automobiles, and lubricants. With this increase in consumer products containing gold nanoparticles, the potential for worker exposure to gold nanoparticles will also increase. Only a few studies have produced data on the in vivo toxicology of gold nanoparticles, meaning that the absorption, distribution, metabolism, and excretion (ADME of gold nanoparticles remain unclear. Results The toxicity of gold nanoparticles was studied in Sprague Dawley rats by inhalation. Seven-week-old rats, weighing approximately 200 g (males and 145 g (females, were divided into 4 groups (10 rats in each group: fresh-air control, low-dose (2.36 × 104 particle/cm3, 0.04 μg/m3, middle-dose (2.36 × 105 particle/cm3, 0.38 μg/m3, and high-dose (1.85 × 106 particle/cm3, 20.02 μg/m3. The animals were exposed to gold nanoparticles (average diameter 4-5 nm for 6 hours/day, 5 days/week, for 90-days in a whole-body inhalation chamber. In addition to mortality and clinical observations, body weight, food consumption, and lung function were recorded weekly. At the end of the study, the rats were subjected to a full necropsy, blood samples were collected for hematology and clinical chemistry tests, and organ weights were measured. Cellular differential counts and cytotoxicity measurements, such as albumin, lactate dehydrogenase (LDH, and total protein were also monitored in a cellular bronchoalveolar lavage (BAL fluid. Among lung function test measurements, tidal volume and minute volume showed a tendency to decrease comparing control and dose groups during the 90-days of exposure. Although no statistically significant differences were found in cellular differential counts, histopathologic examination showed minimal alveoli, an inflammatory infiltrate with a mixed cell type, and increased macrophages in the high-dose rats. Tissue

  20. Subchronic inhalation toxicity of gold nanoparticles.

    Science.gov (United States)

    Sung, Jae Hyuck; Ji, Jun Ho; Park, Jung Duck; Song, Moon Yong; Song, Kyung Seuk; Ryu, Hyeon Ryol; Yoon, Jin Uk; Jeon, Ki Soo; Jeong, Jayoung; Han, Beom Seok; Chung, Yong Hyun; Chang, Hee Kyung; Lee, Ji Hyun; Kim, Dong Won; Kelman, Bruce J; Yu, Il Je

    2011-05-14

    Gold nanoparticles are widely used in consumer products, including cosmetics, food packaging, beverages, toothpaste, automobiles, and lubricants. With this increase in consumer products containing gold nanoparticles, the potential for worker exposure to gold nanoparticles will also increase. Only a few studies have produced data on the in vivo toxicology of gold nanoparticles, meaning that the absorption, distribution, metabolism, and excretion (ADME) of gold nanoparticles remain unclear. The toxicity of gold nanoparticles was studied in Sprague Dawley rats by inhalation. Seven-week-old rats, weighing approximately 200 g (males) and 145 g (females), were divided into 4 groups (10 rats in each group): fresh-air control, low-dose (2.36 × 104 particle/cm3, 0.04 μg/m3), middle-dose (2.36 × 105 particle/cm3, 0.38 μg/m3), and high-dose (1.85 × 106 particle/cm3, 20.02 μg/m3). The animals were exposed to gold nanoparticles (average diameter 4-5 nm) for 6 hours/day, 5 days/week, for 90-days in a whole-body inhalation chamber. In addition to mortality and clinical observations, body weight, food consumption, and lung function were recorded weekly. At the end of the study, the rats were subjected to a full necropsy, blood samples were collected for hematology and clinical chemistry tests, and organ weights were measured. Cellular differential counts and cytotoxicity measurements, such as albumin, lactate dehydrogenase (LDH), and total protein were also monitored in a cellular bronchoalveolar lavage (BAL) fluid. Among lung function test measurements, tidal volume and minute volume showed a tendency to decrease comparing control and dose groups during the 90-days of exposure. Although no statistically significant differences were found in cellular differential counts, histopathologic examination showed minimal alveoli, an inflammatory infiltrate with a mixed cell type, and increased macrophages in the high-dose rats. Tissue distribution of gold nanoparticles showed a dose

  1. Transport and regulation mechanism of the colloidal gold liposomes in the brain microvascular endothelial cells

    Institute of Scientific and Technical Information of China (English)

    WANG Lipeng; CHANG Yanzhong

    2015-01-01

    Objective:Blood-brain barrier is the key barrier of brain in the innate immune. It can prevent the harmful substances from the blood into the brain. In order to keep the brain in a relatively stable environment and maintain the normal function of the nervous system, it can also pump harmful substances or excess substances outside the brain selectively. Among them, brain microvascular endothelial cell tissue is a key part in the blood-brain barrier's function. The number of the patients with central nervous system ( CNS) diseases increased year by year. The therapeutic drug is usually inhibited by the blood-brain barrier and is difficult to work. Therefore, how to modify the drug and to make it easier to cross the blood brain barrier is the key point to cure CNS. At present, more than 95% research focus only on how nano drugs can enter the cell, the way and efficiency to enter the cell and the research of effect of nano drug etc. For the process of drug carrier in endocytosis, intracellular transport and release and regulation of research are rarely reported. Clathrin and P-glycoprotein are related protein in endo-cytosis and exocytosis with nano drug. Clathrin is located on the plasma membrane. It participates in endocytosis of some nutrients, and maybe the entry into the cell of some drugs. P-glycoprotein is located in the membrane of cer-ebral capillary endothelial cells. It can efflux drugs relying on ATP. Although there is a certain understanding of the cell in the inner swallow and efflux. But the process of the liposome drug is not clear. To solve the above prob-lems, using colloidal gold liposome nano materials to trace liposome's transport and regulation mechanism in brain microvascular endothelial cells, and study endocytosis, release, distribution and regulation mechanism of nano lipo-somes in brain microvascular. The solution of this problem can guide to construct reasonable drug carrier, and look forward to clarifing the molecular basis and mechanism of

  2. Highly sensitive hydrogen sulfide (H2 S) gas sensors from viral-templated nanocrystalline gold nanowires

    Science.gov (United States)

    Moon, Chung Hee; Zhang, Miluo; Myung, Nosang V.; Haberer, Elaine D.

    2014-04-01

    A facile, site-specific viral-templated assembly method was used to fabricate sensitive hydrogen sulfide (H2S) gas sensors at room temperature. A gold-binding M13 bacteriophage served to organize gold nanoparticles into linear arrays which were used as seeds for subsequent nanowire formation through electroless deposition. Nanowire widths and densities within the sensors were modified by electroless deposition time and phage concentration, respectively, to tune device resistance. Chemiresistive H2S gas sensors with superior room temperature sensing performance were produced with sensitivity of 654%/ppmv, theoretical lowest detection limit of 2 ppbv, and 70% recovery within 9 min for 0.025 ppmv. The role of the viral template and associated gold-binding peptide was elucidated by removing organics using a short O2 plasma treatment followed by an ethanol dip. The template and gold-binding peptide were crucial to electrical and sensor performance. Without surface organics, the resistance fell by several orders of magnitude, the sensitivity dropped by more than a factor of 100 to 6%/ppmv, the lower limit of detection increased, and no recovery was detected with dry air flow. Viral templates provide a novel, alternative fabrication route for highly sensitive, nanostructured H2S gas sensors.

  3. Plasma dynamo

    CERN Document Server

    Rincon, F; Schekochihin, A A; Valentini, F

    2015-01-01

    Magnetic fields pervade the entire Universe and, through their dynamical interactions with matter, affect the formation and evolution of astrophysical systems from cosmological to planetary scales. How primordial cosmological seed fields arose and were further amplified to $\\mu$Gauss levels reported in nearby galaxy clusters, near equipartition with kinetic energy of plasma motions and on scales of at least tens of kiloparsecs, is a major theoretical puzzle still largely unconstrained by observations. Extragalactic plasmas are weakly collisional (as opposed to collisional magnetohydrodynamic fluids), and whether magnetic-field growth and its sustainment through an efficient dynamo instability driven by chaotic motions is possible in such plasmas is not known. Fully kinetic numerical simulations of the Vlasov equation in a six-dimensional phase space necessary to answer this question have until recently remained beyond computational capabilities. Here, we show by means of such simulations that magnetic-field a...

  4. Tectonic setting of Late Cenozoic gold mineralization in the gold belt of Costa Rica

    Energy Technology Data Exchange (ETDEWEB)

    Deruyter, V.D.

    1985-01-01

    The Gold Belt of Costa Rica is a northwest-elongated zone 15 km wide by 120 km long containing numerous auriferous quartz veins and pyritic silicified patterns upon which abundant small mines are developed. Gold veins are related principally to northeast-southwest and north-south striking, steeply dipping faults. Higher grade ore and thicker veins invariably occur at intersections of these fracture orientations, indicating simultaneous opening at the time of gold introduction. Restriction of gold veins to the northwest-trending arc of Miocene Aguacate Group andesite volcanic rocks, a product of Cocos Plate subduction, suggested approximately coeval formation, but recognition by the writer of the important role played by 2-5 m.y. old altered, gold mineralized rhyolite dikes intruded along north-south gold vein structures and intimately involved with high grade ores at the Esperanza Mine and Rio Chiquito prospect, for example, suggest a much younger period of fracturing and gold introduction. The rhyolite intrusions are more brittle and stockwork mineralized than andesite host rocks and form bulk tonnage gold targets. Initiation of right-lateral movement along the north-south Panama Fracture Zone at 5 m.y.a. within the pattern of northeastward Cocos Plate subduction may have tapped rhyolites from subvolcanic magma chambers into new faults.

  5. Well-Defined Dinuclear Gold Complexes for Preorganization-Induced Selective Dual Gold Catalysis

    NARCIS (Netherlands)

    Vreeken, V.; Broere, D.L.J.; Jans, A.C.H.; Lankelma, M.; Reek, J.N.H.; Siegler, M.A.; van der Vlugt, J.I.

    2016-01-01

    The synthesis, reactivity, and potential of well-defined dinuclear gold complexes as precursors for dual gold catalysis are explored. Using the preorganizing abilities of the ditopic (PNPiPr)-P-H (L-H) ligand, dinuclear Au-I-Au-I complex 1 and mixed-valent Au-I-Au-III complex 2 provide access to str

  6. Knowledge-driven GIS modeling technique for gold exploration, Bulghah gold mine area, Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Ahmed A. Madani

    2011-12-01

    Full Text Available This research aims to generate a favorability map for gold exploration at the Bulghah gold mine area using integration of geo-datasets within a GIS environment. Spatial data analyses and integration of different geo-datasets are carried out based on knowledge-driven and weighting technique. The integration process involves the weighting and scoring of different layers affecting the gold mineralization at the study area using the index overlay method within PCI Geomatica environment. Generation of the binary predictor maps for lithology, lineaments, faults and favorable contacts precede the construction of the favorability map. About 100 m buffer zones are generated for favorable contacts, lineaments and major faults layers. Internal weighting is assigned to each layer based on favorability for gold mineralization. The scores for lithology, major faults, lineaments and favorable contacts layers in the constructed favorability map are 50%, 25%, 10% and 15%, respectively. Final favorability map for the Bulghah gold mine area shows the recording of two new sites for gold mineralization located at the northern and southern extensions of tonalite–diorite intrusions. The northern new site is now exploited for gold from the Bulghah North mine. The southern new site is narrow and small; its rocks resemble those of the Bulghah gold mine.

  7. Coupling reaction on gold nanoparticle to yield polythiophene/gold nanoparticle alternate network film.

    Science.gov (United States)

    Tanaka, Manabu; Fujita, Remi; Nishide, Hiroyuki

    2009-01-01

    The novel gold nanoparticle, which was stabilized with pi-conjugated molecules bearing functional groups at the terminals, was prepared via conventional procedure by using 5-bromo-2,2'-bithiophene-5'-thiol as a stabilizer. The gold nanoparticle (ca. 3 nm-diameter) showed good dispersion stability in various organic solvents, and its electrochemical and spectroscopic study revealed peculiar properties originated in the pi-conjugated molecular stabilizer, bithiophene derivative. The Pd-catalyzed coupling reaction on the gold nanoparticle was first achieved by using the gold nanoparticle bearing bromo groups at the particle surface and the model boronic acid molecule, 5-formyl-2-thiopheneboronic acid, to yield the terthiophene derivatives on the gold nanoparticle. The 1H-NMR, UV, and TGA analysis supported the progress of the coupling reaction on the gold nanoparticle. This Pd-catalyzed coupling reaction was applied with the borate-terminated polythiophene to form polythiophene/gold nanoparticle alternate network film. The electron microscopic images supported the formation of the network structure. The high electric conductivity on the network film suggested that the conductive characteristic of the film originated from that of the pi-conjugated polythiophene backbone connected with the gold nanoparticle.

  8. China Gold Group Invested 2.18 billion Yuan to Buy Gold Mine

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>Ministry of Finance recently proclaimed that China Gold Group has invested 2.18 billion Yuan to gain the exploration right on the Yang- shan gold mine in Wen County,Gansu Prov- ince.Yangshan is located at the place where

  9. Blood gold concentrations in children with juvenile rheumatoid arthritis undergoing long-term oral gold therapy.

    Science.gov (United States)

    Giannini, E H; Brewer, E J; Person, D A

    1984-04-01

    During an uncontrolled, open-labelled, open-ended clinical trial of auranofin in children with juvenile rheumatoid arthritis (JRA) we obtained serial blood samples for the purpose of assessing gold content. Our objectives were (1) to observe the pattern of blood gold concentrations over a period of time in children undergoing long-term oral gold therapy, and (2) to observe the effect of changing dosage levels on blood gold concentrations. The initial dosage of auranofin was 0.1 mg/kg/day with allowable increases to 0.2 mg/kg/day. A concurrent nonsteroidal anti-inflammatory drug was allowed. Twenty-one patients were enrolled in the study, and we obtained 2 or more serial samples on 13 of the children. At a constant dosage of 0.1 mg/kg/day, steady state blood gold concentrations were attained in 11 to 13 weeks of therapy and, in the absence of a dosage change, remained remarkably constant through extended periods. The blood gold concentration was related to total daily dosage rather than to the cumulative amount of gold received. Increasing or decreasing the dose resulted in a direct effect on concentration. The clinical value of blood gold levels resulting from auranofin therapy in JRA will have to be established through double-blind controlled trials.

  10. Synergistic extraction of gold from the refractory gold ore via ultrasound and chlorination-oxidation.

    Science.gov (United States)

    Fu, Likang; Zhang, Libo; Wang, Shixing; Cui, Wei; Peng, Jinhui

    2017-07-01

    A synergistic extraction method for gold from the refractory gold ores via ultrasound and chlorination-oxidation was developed. The effects of solid-liquid ratio, extraction time, ultrasound power, NaClO concentration and NaOH concentration on the extraction rate of gold from the refractory gold ore were investigated. The optimum conditions were as follows: NaClO concentration of 1.5mol/L, NaOH concentration of 1.5mol/L, solid-liquid ratio of 5, ultrasound power of 200W and ultrasound time of 2h. Under the optimal conditions, 68.55% of gold was extracted. However, only 45.8% of gold was extracted after 6h without the ultrasound-assisted extraction. XRD and SEM were used to analyze the influence of ultrasound on the mineral properties and strengthening mechanism. The results showed that the interface layer was peeled, new surface was exposed, reaction resistance was reduced, the liquid-solid reaction was promoted and reaction speed was greatly improved under ultrasound. According to the results of range and variance analysis, the optimum leaching experiment with orthogonal design was almost identical with the optimum experiment of single factor. Among them, the ultrasound power was the most significant factors affecting leaching rate of gold. Compared with other extraction method, the synergistic extraction process decomposed completely sulfide and improved significantly the extraction rate of gold. Copyright © 2017 Elsevier B.V. All rights reserved.

  11. An econometrics method for estimating gold coin futures prices

    Directory of Open Access Journals (Sweden)

    Fatemeh Pousti

    2011-10-01

    Full Text Available In this paper, we present some regression functions to estimate gold coin future price based on gold coin price, future exchange price, price of gold traded globally and trend of time. The proposed model of this paper is used for price estimation of special gold coin traded in Iran. The proposed model of this paper is applied for historical data of future gold prices and the results are discussed. The preliminary results indicate that an increase on gold coin price could increase gold coin future price. An increase on foreign exchange price has negative impact on gold coin future and present trend on time has positive impact on gold coin future.

  12. Beneficiation of the gold bearing ore by gravity and flotation

    Science.gov (United States)

    Gül, Alim; Kangal, Olgaç; Sirkeci, Ayhan A.; Önal, Güven

    2012-02-01

    Gold concentration usually consists of gravity separation, flotation, cyanidation, or the combination of these processes. The choice among these processes depends on the mineralogical characterization and gold content of the ore. Recently, the recovery of gold using gravity methods has gained attention because of low cost and environmentally friendly operations. In this study, gold pre-concentrates were produced by the stepwise gravity separation and flotation techniques. The Knelson concentrator and conventional flotation were employed for the recovery of gold. Gold bearing ore samples were taken from Gümüşhane Region, northern east part of Turkey. As a result of stepwise Knelson concentration experiments, a gold concentrate assaying around 620 g/t is produced with 41.4wt% recovery. On the other hand, a gold concentrate about 82 g/t is obtained with 89.9wt% recovery from a gold ore assaying 6 g/t Au by direct flotation.

  13. Characterization of MHz pulse repetition rate femtosecond laser-irradiated gold-coated silicon surfaces

    Directory of Open Access Journals (Sweden)

    Venkatakrishnan Krishnan

    2011-01-01

    Full Text Available Abstract In this study, MHz pulse repetition rate femtosecond laser-irradiated gold-coated silicon surfaces under ambient condition were characterized by scanning electron microscopy (SEM, transmission electron microscopy (TEM, X-ray diffraction analysis (XRD, and X-ray photoelectron spectroscopy (XPS. The radiation fluence used was 0.5 J/cm2 at a pulse repetition rate of 25 MHz with 1 ms interaction time. SEM analysis of the irradiated surfaces showed self-assembled intermingled weblike nanofibrous structure in and around the laser-irradiated spots. Further TEM investigation on this nanostructure revealed that the nanofibrous structure is formed due to aggregation of Au-Si/Si nanoparticles. The XRD peaks at 32.2°, 39.7°, and 62.5° were identified as (200, (211, and (321 reflections, respectively, corresponding to gold silicide. In addition, the observed chemical shift of Au 4f and Si 2p lines in XPS spectrum of the irradiated surface illustrated the presence of gold silicide at the irradiated surface. The generation of Si/Au-Si alloy fibrous nanoparticles aggregate is explained by the nucleation and subsequent condensation of vapor in the plasma plume during irradiation and expulsion of molten material due to high plasma pressure.

  14. Plasma medicine

    CERN Document Server

    Fridman, Alexander

    2012-01-01

    This comprehensive text is suitable for researchers and graduate students of a 'hot' new topic in medical physics. Written by the world's leading experts,  this book aims to present recent developments in plasma medicine, both technological and scientific, reviewed in a fashion accessible to the highly interdisciplinary audience consisting of doctors, physicists, biologists, chemists and other scientists, university students and professors, engineers and medical practitioners. The book focuses on major topics and covers the physics required to develop novel plasma discharges relevant for medic

  15. Au nanoparticle-based sensor for apomorphine detection in plasma

    Directory of Open Access Journals (Sweden)

    Chiara Zanchi

    2015-11-01

    Full Text Available Artificially roughened gold surfaces with controlled nanostructure produced by pulsed laser deposition have been investigated as sensors for apomorphine detection aiming at clinical application. The use of such gold surfaces has been optimized using aqueous solutions of apomorphine in the concentration range between 3.3 × 10−4 M and 3.3 × 10−7 M. The experimental parameters have been investigated and the dynamic concentration range of the sensor has been assessed by the selection of two apomorphine surface enhanced Raman scattering (SERS peaks. The sensor behavior used to detect apomorphine in unfiltered human blood plasma is presented and discussed.

  16. Silver, gold, and alloyed silver-gold nanoparticles: characterization and comparative cell-biologic action

    Science.gov (United States)

    Mahl, Dirk; Diendorf, Jörg; Ristig, Simon; Greulich, Christina; Li, Zi-An; Farle, Michael; Köller, Manfred; Epple, Matthias

    2012-10-01

    Silver, gold, and silver-gold-alloy nanoparticles were prepared by citrate reduction modified by the addition of tannin during the synthesis, leading to a reduction in particle size by a factor of three. Nanoparticles can be prepared by this easy water-based synthesis and subsequently functionalized by the addition of either tris(3-sulfonatophenyl)phosphine or poly( N-vinylpyrrolidone). The resulting nanoparticles of silver (diameter 15-25 nm), gold (5-6 nm), and silver-gold (50:50; 10-12 nm) were easily dispersable in water and also in cell culture media (RPMI + 10 % fetal calf serum), as shown by nanoparticle tracking analysis and differential centrifugal sedimentation. High-resolution transmission electron microscopy showed a polycrystalline nature of all nanoparticles. EDX on single silver-gold nanoparticles indicated that the concentration of gold is higher inside a nanoparticle. The biologic action of the nanoparticles toward human mesenchymal stem cells (hMSC) was different: Silver nanoparticles showed a significant concentration-dependent influence on the viability of hMSC. Gold nanoparticles showed only a small effect on the viability of hMSC after 7 days. Surprisingly, silver-gold nanoparticles had no significant influence on the viability of hMSC despite the silver content. Silver nanoparticles and silver-gold nanoparticles in the concentration range of 5-20 μg mL-1 induced the activation of hMSC as indicated by the release of IL-8. In contrast, gold nanoparticles led to a reduction of the release of IL-6 and IL-8.

  17. Silver, gold, and alloyed silver-gold nanoparticles: characterization and comparative cell-biologic action

    Energy Technology Data Exchange (ETDEWEB)

    Mahl, Dirk; Diendorf, Joerg; Ristig, Simon [University of Duisburg-Essen, Department of Inorganic Chemistry, Center for Nanointegration Duisburg-Essen (CeNIDE) (Germany); Greulich, Christina [Ruhr-University of Bochum, Bergmannsheil University Hospital/Surgical Research (Germany); Li Zian; Farle, Michael [University of Duisburg-Essen, Faculty of Physics, Center for Nanointegration Duisburg-Essen (CeNIDE) (Germany); Koeller, Manfred [Ruhr-University of Bochum, Bergmannsheil University Hospital/Surgical Research (Germany); Epple, Matthias, E-mail: matthias.epple@uni-due.de [University of Duisburg-Essen, Department of Inorganic Chemistry, Center for Nanointegration Duisburg-Essen (CeNIDE) (Germany)

    2012-10-15

    Silver, gold, and silver-gold-alloy nanoparticles were prepared by citrate reduction modified by the addition of tannin during the synthesis, leading to a reduction in particle size by a factor of three. Nanoparticles can be prepared by this easy water-based synthesis and subsequently functionalized by the addition of either tris(3-sulfonatophenyl)phosphine or poly(N-vinylpyrrolidone). The resulting nanoparticles of silver (diameter 15-25 nm), gold (5-6 nm), and silver-gold (50:50; 10-12 nm) were easily dispersable in water and also in cell culture media (RPMI + 10 % fetal calf serum), as shown by nanoparticle tracking analysis and differential centrifugal sedimentation. High-resolution transmission electron microscopy showed a polycrystalline nature of all nanoparticles. EDX on single silver-gold nanoparticles indicated that the concentration of gold is higher inside a nanoparticle. The biologic action of the nanoparticles toward human mesenchymal stem cells (hMSC) was different: Silver nanoparticles showed a significant concentration-dependent influence on the viability of hMSC. Gold nanoparticles showed only a small effect on the viability of hMSC after 7 days. Surprisingly, silver-gold nanoparticles had no significant influence on the viability of hMSC despite the silver content. Silver nanoparticles and silver-gold nanoparticles in the concentration range of 5-20 {mu}g mL{sup -1} induced the activation of hMSC as indicated by the release of IL-8. In contrast, gold nanoparticles led to a reduction of the release of IL-6 and IL-8.

  18. Au与Au合金的微合金化%Microalloying of Gold and Gold Alloys

    Institute of Scientific and Technical Information of China (English)

    宁远涛

    2008-01-01

    Microalloying to pure gold and gold alloys was discussed and summerized. The main effects of microalloying elements in gold alloys are those for strengthening, for regulating electrical resistance, for refining grain-size and for increasing recrystallization temperature. In nearly all applications, the elements with large difference of melting point or atomic size to gold, and those with low solid solubility in gold, such as alkali- and alkali-earth metals, rare earth metals, high melting point metals, metalloids and some simple metals are selected as microalloying elements. Some examples of microalloyed gold alloys are introduced. The effects of many microalloying elements on the properties of gold and gold alloys are often multiple-coincidence. Some selection principles of microalloying elements for gold and gold alloys with various applications are summarized.%讨论和总结了Au与Au合金的微合金化.在Au合金中,微合金化元素的主要作用是强化、调整电阻率、细化晶粒尺寸和提高再结晶温度等. 几乎在所有的应用中,相对于Au具有大的熔点差或原子尺寸差的合金元素,诸如碱和碱土金属、稀土金属、高熔点金属、类金属和某些简单金属被选择作为微合金化元素. 介绍了微合金化Au合金的某些应用.许多微合金化元素对Au和Au合金性能的影响常常是多重和协同的.总结了对于不同应用的Au和Au合金的微合金化元素的某些选择原则.

  19. Stress Formation During Self-Assembly of Alkanethiols on Differently Pre-Treated Gold Surfaces

    DEFF Research Database (Denmark)

    Hansen, Allan Glargaard; Mortensen, Michael Wrang; Andersen, Jens Enevold Thaulov

    2001-01-01

    surface roughness induced by aqua regia etching, resulting in a higher density of adsorption sites. Surfaces cleaned willi oxygen plasma, however, give more reproducible stress change curves. The stress change curves of surfaces cleaned with aqua regia become less stable af ter three subsequent cleanings...... the rate and reproducibility of the adsorption process. Further objectives have been to maximise the stress signal during adsorption and to develop a method for removing sulphur immobilised molecules. Before each adsorption experiment the gold surface was cleaned in aqua regia, or in oxygen plasma....... Adsorption of alkanethiols caused changes in surface stress, which closely followed Langmuir type kinetics. Cleaning with aqua regia generally provides higher adsorption rates and a larger stress change than cleaning with oxygen plasma. Based on AFM imaging, we propose that this is related to a larger...

  20. Plasma physics and engineering

    CERN Document Server

    Fridman, Alexander

    2011-01-01

    Part I: Fundamentals of Plasma Physics and Plasma ChemistryPlasma in Nature, in the Laboratory, and in IndustryOccurrence of Plasma: Natural and Man MadeGas DischargesPlasma Applications, Plasmas in IndustryPlasma Applications for Environmental ControlPlasma Applications in Energy ConversionPlasma Application for Material ProcessingBreakthrough Plasma Applications in Modern TechnologyElementary Processes of Charged Species in PlasmaElementary Charged Particles in Plasma and Their Elastic and Inelastic CollisionsIonization ProcessesMechanisms of Electron Losses: The Electron-Ion RecombinationEl

  1. Precipitation of lamellar gold nanocrystals in molten polymers

    Science.gov (United States)

    Palomba, M.; Carotenuto, G.

    2016-05-01

    Non-aggregated lamellar gold crystals with regular shape (triangles, squares, pentagons, etc.) have been produced by thermal decomposition of gold chloride (AuCl) molecules in molten amorphous polymers (polystyrene and poly(methyl methacrylate)). Such covalent inorganic gold salt is high soluble into non-polar polymers and it thermally decomposes at temperatures compatible with the polymer thermal stability, producing gold atoms and chlorine radicals. At the end of the gold precipitation process, the polymer matrix resulted chemically modified because of the partial cross-linking process due to the gold atom formation reaction.

  2. Application of gold in the field of heterogeneous catalysis

    CERN Document Server

    Luo, Siwei

    2014-01-01

    Gold has been long thought as an inert metal which finds most of its use in jewelry and monetary exchange. However, catalysis by gold has rapidly become a hot topic in chemistry ever since Haruta and Hutchings found gold to be an extraordinary good heterogeneous catalyst in certain reactions. Here in this paper, several model reactions which made gold historically famous as a catalyst and a currently hot topic will be demonstrated, such as oxidation of CO, selective oxidation, and hydrodechlorination. Conclusions on the chemical nature of gold will be made as well as future perspectives of designing gold as a better catalyst.

  3. Gold nanoparticle-based electrochemical biosensors

    Energy Technology Data Exchange (ETDEWEB)

    Pingarron, Jose M.; Yanez-Sedeno, Paloma; Gonzalez-Cortes, Araceli [Department of Analytical Chemistry, Faculty of Chemistry, University Complutense of Madrid, 28040 Madrid (Spain)

    2008-08-01

    The unique properties of gold nanoparticles to provide a suitable microenvironment for biomolecules immobilization retaining their biological activity, and to facilitate electron transfer between the immobilized proteins and electrode surfaces, have led to an intensive use of this nanomaterial for the construction of electrochemical biosensors with enhanced analytical performance with respect to other biosensor designs. Recent advances in this field are reviewed in this article. The advantageous operational characteristics of the biosensing devices designed making use of gold nanoparticles are highlighted with respect to non-nanostructured biosensors and some illustrative examples are commented. Electrochemical enzyme biosensors including those using hybrid materials with carbon nanotubes and polymers, sol-gel matrices, and layer-by-layer architectures are considered. Moreover, electrochemical immunosensors in which gold nanoparticles play a crucial role in the electrode transduction enhancement of the affinity reaction as well as in the efficiency of immunoreagents immobilization in a stable mode are reviewed. Similarly, recent advances in the development of DNA biosensors using gold nanoparticles to improve DNA immobilization on electrode surfaces and as suitable labels to improve detection of hybridization events are considered. Finally, other biosensors designed with gold nanoparticles oriented to electrically contact redox enzymes to electrodes by a reconstitution process and to the study of direct electron transfer between redox proteins and electrode surfaces have also been treated. (author)

  4. Gold Nanoparticle Labels Amplify Ellipsometric Signals

    Science.gov (United States)

    Venkatasubbarao, Srivatsa

    2008-01-01

    The ellipsometric method reported in the immediately preceding article was developed in conjunction with a method of using gold nanoparticles as labels on biomolecules that one seeks to detect. The purpose of the labeling is to exploit the optical properties of the gold nanoparticles in order to amplify the measurable ellipsometric effects and thereby to enable ultrasensitive detection of the labeled biomolecules without need to develop more-complex ellipsometric instrumentation. The colorimetric, polarization, light-scattering, and other optical properties of nanoparticles depend on their sizes and shapes. In the present method, these size-and-shape-dependent properties are used to magnify the polarization of scattered light and the diattenuation and retardance of signals derived from ellipsometry. The size-and-shape-dependent optical properties of the nanoparticles make it possible to interrogate the nanoparticles by use of light of various wavelengths, as appropriate, to optimally detect particles of a specific type at high sensitivity. Hence, by incorporating gold nanoparticles bound to biomolecules as primary or secondary labels, the performance of ellipsometry as a means of detecting the biomolecules can be improved. The use of gold nanoparticles as labels in ellipsometry has been found to afford sensitivity that equals or exceeds the sensitivity achieved by use of fluorescence-based methods. Potential applications for ellipsometric detection of gold nanoparticle-labeled biomolecules include monitoring molecules of interest in biological samples, in-vitro diagnostics, process monitoring, general environmental monitoring, and detection of biohazards.

  5. Engineered Gold Nanoparticles and Plant Adaptation Potential

    Science.gov (United States)

    Siddiqi, Khwaja Salahuddin; Husen, Azamal

    2016-09-01

    Use of metal nanoparticles in biological system has recently been recognised although little is known about their possible effects on plant growth and development. Nanoparticles accumulation, translocation, growth response and stress modulation in plant system is not well understood. Plants exposed to gold and gold nanoparticles have been demonstrated to exhibit both positive and negative effects. Their growth and yield vary from species to species. Cytoxicity of engineered gold nanoparticles depends on the concentration, particle size and shape. They exhibit increase in vegetative growth and yield of fruit/seed at lower concentration and decrease them at higher concentration. Studies have shown that the gold nanoparticles exposure has improved free radical scavenging potential and antioxidant enzymatic activities and alter micro RNAs expression that regulate different morphological, physiological and metabolic processes in plants. These modulations lead to improved plant growth and yields. Prior to the use of gold nanoparticles, it has been suggested that its cost may be calculated to see if it is economically feasible.

  6. Amplitude enhancement by a gold dimer

    Science.gov (United States)

    Hong, Xin; Wang, Jingxin; Jin, Zheng

    2016-10-01

    The unique optical properties such as brightness, non-bleaching, good bio-compatibility make gold particles ideal label candidates for molecular probes. Due to the strongly enhanced field, aggregation of gold nanoparticles finds themselves plenty of applications in bio-imaging. But limited by its small cross-section associated with nanometer sized particle, it is a big challenge to employ it in a single molecular detection. The field enhancement results from the effect of plasmonic coupling between two closely attached gold nanoparticle under the right excitation condition. With the aim to apply the gold dimer probe to find the molecules in our recently established optical detection method, we compared of the amplitude enhancement by the dimer relative to a single particle. The amplitude distribution under a highly focused illumination objective was calculated, whose results suggest that at the optimized excitation condition, the local field can be enhanced 190 fold. In consequence, experimental detection was carried out. Gold dimers were linked together by the hybridization of two single chain DNAs. Dimer and single particle probes were mixed together in one detection. Overwhelming contrast between these two kinds of probes were clearly exhibited in the experimental detection image. This method can provide a way to a high specific detection in early diagnosis.

  7. Simple fabrication of gold nanobelts and patterns.

    Directory of Open Access Journals (Sweden)

    Renyun Zhang

    Full Text Available Gold nanobelts are of interest in several areas; however, there are only few methods available to produce these belts. We report here on a simple evaporation induced self-assembly (EISA method to produce porous gold nanobelts with dimensions that scale across nanometer (thickness ∼80 nm and micrometer (width ∼20 µm, to decimeter (length ∼0.15 m. The gold nanobelts are well packed on the beaker wall and can be easily made to float on the surface of the solution for depositing onto other substrates. Microscopy showed that gold nanobelts had a different structure on the two sides of the belt; the density of gold nanowires on one side was greater than on the other side. Electrical measurements showed that these nanobelts were sensitive to compressive or tensile forces, indicating a potential use as a strain sensor. The patterned nanobelts were further used as a template to grow ZnO nanowires for potential use in applications such as piezo-electronics.

  8. A study of the electron transfer and photothermal effect of gold nanorods on a glucose biosensor

    Energy Technology Data Exchange (ETDEWEB)

    Liu Huiyu; Yang Liuqing; Ren Xiangling; Tang Fangqiong; Ren Jun [Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190 (China); Chen Dong, E-mail: tangfq@mail.ipc.ac.cn [Beijing Creative Nanophase Hi-Tech Company, Limited, Beijing 100086 (China)

    2010-05-07

    A new glucose biosensor based on the electron transfer and photothermal effect of gold nanorods (GNRs) is reported here. The biosensor was prepared by immobilizing glucose oxidase (GOx) on a platinum (Pt) electrode by a composite film consisting of GNRs, polyvinyl butyral (PVB) and glutaraldehyde. GNRs were synthesized by a gold seed-mediated cetyltrimethylammonium bromide (CTAB) surfactant-assisted approach. The fabrication, characterization and analytical performance of the glucose biosensor based on GNRs are described in this paper. Moreover, the modulation of the biosensor by the photothermal effect based on the unique surface plasma resonance (SPR) property of GNRs was investigated for the first time. The results show that the current response of a glucose biosensor can significantly increase, induced by the electrical conductivity and photothermal effect of GNRs.

  9. A study of the electron transfer and photothermal effect of gold nanorods on a glucose biosensor

    Science.gov (United States)

    Liu, Huiyu; Chen, Dong; Yang, Liuqing; Ren, Xiangling; Tang, Fangqiong; Ren, Jun

    2010-05-01

    A new glucose biosensor based on the electron transfer and photothermal effect of gold nanorods (GNRs) is reported here. The biosensor was prepared by immobilizing glucose oxidase (GOx) on a platinum (Pt) electrode by a composite film consisting of GNRs, polyvinyl butyral (PVB) and glutaraldehyde. GNRs were synthesized by a gold seed-mediated cetyltrimethylammonium bromide (CTAB) surfactant-assisted approach. The fabrication, characterization and analytical performance of the glucose biosensor based on GNRs are described in this paper. Moreover, the modulation of the biosensor by the photothermal effect based on the unique surface plasma resonance (SPR) property of GNRs was investigated for the first time. The results show that the current response of a glucose biosensor can significantly increase, induced by the electrical conductivity and photothermal effect of GNRs.

  10. Gold nanomaterials for the selective capturing and SERS diagnosis of toxins in aqueous and biological fluids

    DEFF Research Database (Denmark)

    Hassanain, Waleed A.; Izake, Emad L.; Schmidt, Michael Stenbæk

    2017-01-01

    A highly sensitive nanosensing method for the combined selective capture and SERS detection of Microcystin-LR (MC-LR) in blood plasma has been developed. The new method utilizes gold coated magnetic nanoparticles that are functionalized with anti MC-LR antibody Fab' fragments for the selective...... the extractor nanoparticles within 5min by manipulating the pH environment of the nanoparticles. The regenerated extractor nanoparticles maintained their capture efficiency and, therefore, were re-used to capture of MC-LR from successive samples. The released purified toxin was screened within 10min on gold...... was 10fM (R2=0.9975) which is well below the clinically required detection limit of the toxin. The SERS determination of MC-LR was cross validated against ELISA. By using antibody fragments that are specific to the target biomolecule, the new methodology can be extended to the rapid extraction...

  11. Retrograde tracing of fluorescent gold after autogenous nerve transplantation on spinal cord injured in rats

    DEFF Research Database (Denmark)

    Lin, X; Liu, W; Ding, Ming;

    2016-01-01

    Objective To investigate the changes of the fluorescent gold retrograde tracing autogenous nerve transplantation on spinal cord injured in rats. Methods The animals were divided into two groups, with modified Allen impact method to establish model of spinal cord injury. After 4 weeks......, the transplantation group using autologous sural nerve graft to repair spinal cord injury period and non-transplantation group was only exposed incision without treatment. In the 4, 6 and 8 weeks after operation, the retrograde tracing of FG Fluoro-Gold was performed to discover the recovery of the axial plasma.......01). Conclusion After spinal cord injury, autologous nerve graft was repaired and survived well and promote the recovery of spinal cord injury segment shaft pulp transportation function....

  12. Gold nanocrystals with DNA-directed morphologies

    Science.gov (United States)

    Ma, Xingyi; Huh, June; Park, Wounjhang; Lee, Luke P.; Kwon, Young Jik; Sim, Sang Jun

    2016-09-01

    Precise control over the structure of metal nanomaterials is important for developing advanced nanobiotechnology. Assembly methods of nanoparticles into structured blocks have been widely demonstrated recently. However, synthesis of nanocrystals with controlled, three-dimensional structures remains challenging. Here we show a directed crystallization of gold by a single DNA molecular regulator in a sequence-independent manner and its applications in three-dimensional topological controls of crystalline nanostructures. We anchor DNA onto gold nanoseed with various alignments to form gold nanocrystals with defined topologies. Some topologies are asymmetric including pushpin-, star- and biconcave disk-like structures, as well as more complex jellyfish- and flower-like structures. The approach of employing DNA enables the solution-based synthesis of nanocrystals with controlled, three-dimensional structures in a desired direction, and expands the current tools available for designing and synthesizing feature-rich nanomaterials for future translational biotechnology.

  13. Gold(III) complexes in medicinal chemistry.

    Science.gov (United States)

    Maia, Pedro Ivo da Silva; Deflon, Victor M; Abram, Ulrich

    2014-09-01

    A number of gold(III) compounds has been designed with the objective of overcoming the disadvantages associated with the platinum-based drugs for cancer treatment. Compounds of a remarkable structural manifold show significant antiproliferative effects in vitro against a number of cancer cells, including cisplatin resistant ones. The target of most of them is, unlike that of cisplatin, not the DNA. Although the mechanisms of action displayed by the gold compounds in biological media are still under investigation, many studies show evidence that the cellular targets are mitochondria-based. Recent advances in gold(III) medicinal chemistry also recommend such compounds for other pharmacological applications such as the treatment of viral or parasitic diseases. The radioactive isotopes (198)Au and (199)Au present potential in radiotherapy.

  14. Galvanic gold plating for fixed dental prosthesis.

    Science.gov (United States)

    Ozcelik, Tuncer Burak; Yilmaz, Burak

    2013-07-01

    Metal ceramic partial fixed dental prostheses have been commonly used for the replacement of missing teeth for many years. Because of an increase in the price of gold, base metal alloys have been the choice of alloy for the fabrication of metal ceramic restorations in many dental clinics. Some major disadvantages of base metals are their corrosion and the dark coloration they may cause at the crown margins. This article describes a galvanic gold-plating technique, which is used to minimize corrosion and improve the esthetics of metal ceramic restorations fabricated with Cr-Co base metal alloys. This technique involves the deposition of a 6 μm to 8 μm 24 K gold layer directly onto the Cr-Co cast prosthesis framework. The technique improves metal surface properties, making them more biocompatible and usable, however, requires additional equipment and experienced laboratory technicians. Clinical studies should be performed to corroborate the long term success of this technique.

  15. Hybrid gold single crystals incorporating amino acids

    CERN Document Server

    Chen, Linfeng; Weber, Eva; Fitch, Andy N; Pokroy, Boaz

    2016-01-01

    Composite hybrid gold crystals are of profound interest in various research areas ranging from materials science to biology. Their importance is due to their unique properties and potential implementation, for example in sensing or in bio-nanomedicine. Here we report on the formation of hybrid organic-metal composites via the incorporation of selected amino acids histidine, aspartic acid, serine, glutamine, alanine, cysteine, and selenocystine into the crystal lattice of single crystals of gold. We used electron microscopy, chemical analysis and high-resolution synchrotron powder X ray diffraction to examine these composites. Crystal shape, as well as atomic concentrations of occluded amino acids and their impact on the crystal structure of gold, were determined. Concentration of the incorporated amino acid was highest for cysteine, followed by serine and aspartic acid. Our results indicate that the incorporation process probably occurs through a complex interaction of their individual functional groups with ...

  16. Ultrasonic-aided fabrication of gold nanofluids.

    Science.gov (United States)

    Chen, Hui-Jiuan; Wen, Dongsheng

    2011-03-07

    A novel ultrasonic-aided one-step method for the fabrication of gold nanofluids is proposed in this study. Both spherical- and plate-shaped gold nanoparticles (GNPs) in the size range of 10-300 nm are synthesized. Subsequent purification produces well-controlled nanofluids with known solid and liquid contents. The morphology and properties of the nanoparticle and nanofluids are characterized by transmission electron microscopy, scanning electron microscope, energy dispersive X-ray spectroscope, X-ray diffraction spectroscopy, and dynamic light scattering, as well as effective thermal conductivities. The ultrasonication technique is found to be a very powerful tool in engineering the size and shape of GNPs. Subsequent property measurement shows that both particle size and particle shape play significant roles in determining the effective thermal conductivity. A large increase in effective thermal conductivity can be achieved (approximately 65%) for gold nanofluids using plate-shaped particles under low particle concentrations (i.e.764 μM/L).

  17. Layering-induced Superlubricity: Gold on Graphite

    Science.gov (United States)

    Vanossi, Andrea; Guerra, Roberto; Tosatti, Erio; Nanofriction Group Sissa Team

    2015-03-01

    By means of realistic MD simulations, we explore the static friction trend as a function of the true contact area and the model dimensionality for 2D gold nanoislands and 3D gold nanoclusters deposited on graphite, interesting tribological systems whose slow and fast dynamics have been previously investigated. For increasing island size, because of the relative gold-graphite lattice mismatch, the interface stress energy has the chance to pile up by forming frustrated unmatched (i.e., incommensurate) regions and to develop a continuous solitonic pathway, foreshadowing a possible condition for the occurrence of ultra-low friction regimes. The significant reduction of the depinning threshold, towards superlubricity, with the system dimensionality can be ascribed to a layering-induced effective stiffness of the interface contact, favoring the natural Au-C lattice incommensurability. Partly sponsored under SNSF Sinergia Grant CRSII2 136287/1, EU ERC Grant No. 320796 MODPHYSFRICT, EU COST Action MP1303.

  18. Regional and subcellular distribution of gold in brain of gold thioglucose obese mouse.

    Science.gov (United States)

    Kataoka, K; Danbara, H; Sunayashiki, K; Okuno, S; Sorimachi, M; Tanaka, M; Chikamori, K

    1978-01-01

    By employing neutron activation analysis, endogenous content of gold was estimated quantitatively in discrete brain areas and in subcellular fractions of the hypothalamus of gold thioglucose (GTG) induced obese mice. The highest concentration of gold was obtained in the ventromedial hypothalamus (VMH) reaching approximately 100 ng/mg wet tissue. Significantly higher concentrations were observed in other hypothalamic subareas followed by certain limbic areas and the thalamus, while in the cerebral and the cerebellar cortex the gold concentration was very low. Subcellularly, the hypothalamic gold was principally recovered in the supernatant fraction particularly after a hyposmotic shock treatment of the crude mitochondrial fraction. Contrary to GTG, treatment with gold thiomalate (GTM) did not induce obesity in the mouse, although considerable amount of gold was observed in the VMH, a finding suggesting the existence in the VMH of at least a two step mechanisms for inducing GTG obesity. To identify the satiety neuron transmitter, an analysis of certain enzyme activities involved in the synthesis of known transmitters, such as acetylcholine or gamma-aminobutyric acid (GABA), was made in the GTG-obese mice. There were no significant changes in any of the areas functionally related to the VMH.

  19. Direct formation of gold nanorods on surfaces using polymer-immobilised gold seeds.

    Science.gov (United States)

    Abyaneh, Majid K; Parisse, Pietro; Casalis, Loredana

    2016-01-01

    Herein, we present the formation of gold nanorods (GNRs) on novel gold-poly(methyl methacrylate) (Au-PMMA) nanocomposite substrates with unprecedented growth control through the polymer molecular weight (M w) and gold-salt-to-polymer weight ratio. For the first time, GNRs have been produced by seed-mediated direct growth on surfaces that were pre-coated with polymer-immobilised gold seeds. A Au-PMMA nanocomposite formed by UV photoreduction has been used as the gold seed. The influence of polymer M w and gold concentration on the formation of GNRs has been investigated and discussed. The polymer nanocomposite formed with a lower M w PMMA and 20 wt % gold salt provides a suitable medium for growing well-dispersed GNRs. In this sample, the average dimension of produced GNRs is 200 nm in length with aspect ratios up to 10 and a distribution of GNRs to nanoparticles of nearly 22%. Suitable characterization techniques such as AFM and SEM have been used to support concept of the proposed growth method.

  20. Gold nanoparticles: role of size and surface chemistry on blood protein adsorption

    Energy Technology Data Exchange (ETDEWEB)

    Benetti, F., E-mail: filippo.benetti@unitn.it; Fedel, M. [BIOtech Research Centre (Italy); Minati, L.; Speranza, G. [Fondazione Bruno Kessler (Italy); Migliaresi, C. [BIOtech Research Centre (Italy)

    2013-06-15

    Material interaction with blood proteins is a critical issue, since it could influence the biological processes taking place in the body following implantation/injection. This is particularly important in the case of nanoparticles, where innovative properties, such as size and high surface to volume ratio can lead to a behavioral change with respect to bulk macroscopic materials and could be responsible for a potential risk for human health. The aim of this work was to compare gold nanoparticles (AuNP) and planar surfaces to study the role of surface curvature moving from the macro- to the nano-size in the process of blood protein adsorption. In the course of the study, different protocols were tested to optimize the analysis of protein adsorption on gold nanoparticles. AuNP with different size (10, 60 and 200 nm diameter) and surface coatings (citrate and polyethylene glycol) were carefully characterized. The stabilizing action of blood proteins adsorbed on AuNP was studied measuring the variation of size and solubility of the nanoparticles following incubation with single protein solutions (human serum albumin and fibrinogen) and whole blood plasma. In addition, we developed a method to elute proteins from AuNP to study the propensity of gold materials to adsorb plasma proteins in function of dimensional characteristics and surface chemistry. We showed a different efficacy of the various eluting media tested, proving that even the most aggressive agent cannot provide a complete detachment of the protein corona. Enhanced protein adsorption was evidenced on AuNP if compared to gold laminae (bare and PEGylated) used as macroscopic control, probably due to the superior AuNP surface reactivity.

  1. Major Brazilian gold deposits - 1982 to 1999

    Science.gov (United States)

    Thorman, Charles H.; DeWitt, Ed; Maron, Marcos A.; Ladeira, Eduardo A.

    2001-07-01

    Brazil has been a major but intermittent producer of gold since its discovery in 1500. Brazil led the world in gold production during the 18th and early 19th centuries. From the late 19th century to the late 20th century, total mining company and garimpeiro production was small and relatively constant at about 5 to 8 t/year. The discovery of alluvial deposits in the Amazon by garimpeiros in the 1970s and the opening of eight mines by mining companies from 1983 to 1990 fueled a major boom in Brazil's gold production, exceeding 100 t/year in 1988 and 1989. However, garimpeiro alluvial production decreased rapidly in the 1990s, to about 10 t/year by 1999. Company production increased about tenfold from about 4 t/year in 1982 to 40 t in 1992. Production from 1992 to the present remained relatively stable, even though several mines were closed or were in the process of closing and no new major mines were put into production during that period. Based on their production history from 1982-1999, 17 gold mines are ranked as major (>20 t) and minor (3-8 t) mines. From 1982-1999, deposits hosted in Archean rocks produced 66% of the gold in Brazil, whereas deposits in Paleoproterozoic and Neoproterozoic rocks accounted for 19% and 15%, respectively. Deposits in metamorphosed sedimentary rocks, especially carbonate-rich rocks and carbonate iron-formation, yielded the great bulk of the gold. Deposits in igneous rocks were of much less importance. The Archean and Paleoproterozoic terranes of Brazil largely lack base-metal-rich volcanogenic massive sulfide deposits, porphyry deposits, and polymetallic veins and sedimentary exhalative deposits. An exception to this is in the Carajás Mineral Province.

  2. Magnetoresistive waves in plasmas

    Science.gov (United States)

    Felber, F. S.; Hunter, R. O., Jr.; Pereira, N. R.; Tajima, T.

    1982-10-01

    The self-generated magnetic field of a current diffusing into a plasma between conductors can magnetically insulate the plasma. Propagation of magnetoresistive waves in plasmas is analyzed. Applications to plasma opening switches are discussed.

  3. Gold and Silver Inlaid Bronze Sheep

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Gold and silver inlaying is a metal processing technique popular during the Spring and Autumn Period (770-476 B. C.) and the Warring States Period (475-221 B. C.). Patterns on the surface of the bronze figure are chiselled out and gold and silver threads (which can be as thin as hair) are inlaid. Finally the whole figure is filed and polished resulting in a splendid artistic work highlighting the different colours of the three different kinds of metal. The artifact shown here was unearthed from Ningxia'...

  4. Current methods for synthesis of gold nanoparticles.

    Science.gov (United States)

    Herizchi, Roya; Abbasi, Elham; Milani, Morteza; Akbarzadeh, Abolfazl

    2016-01-01

    Metal nanoparticles, such as nanoparticles synthesized using gold, have numerous uncommon chemical and physical properties due to the effects of their quantum size and their large surface area, in comparison with other metal atoms or bulk metal. Gold nanoparticles (GNPs), in particular, are very attractive because of their size and shape-dependent properties. Metal nanoparticles have gathered extensive attention due to their uncommon properties and promising applications in photonics, electronics, biochemical sensing, and imaging. This review covers recent advances in the synthesis of GNPs.

  5. Functionalized Gold Nanoparticles and Their Biomedical Applications

    Directory of Open Access Journals (Sweden)

    Shree R. Singh

    2011-06-01

    Full Text Available Metal nanoparticles are being extensively used in various biomedical applications due to their small size to volume ratio and extensive thermal stability. Gold nanoparticles (GNPs are an obvious choice due to their amenability of synthesis and functionalization, less toxicity and ease of detection. The present review focuses on various methods of functionalization of GNPs and their applications in biomedical research. Functionalization facilitates targeted delivery of these nanoparticles to various cell types, bioimaging, gene delivery, drug delivery and other therapeutic and diagnostic applications. This review is an amalgamation of recent advances in the field of functionalization of gold nanoparticles and their potential applications in the field of medicine and biology.

  6. Chirality in Bare and Passivated Gold Nanoclusters

    CERN Document Server

    Garzon, I L; Rodrigues-Hernandez, J I; Sigal, I; Beltran, M R; Michaelian, K

    2002-01-01

    Chiral structures have been found as the lowest-energy isomers of bare (Au$_{28}$ and Au$_{55}) and thiol-passivated (Au$_{28}(SCH$_{3})$_{16}$ and Au$_{38}$(SCH$_{3}$)$_{24}) gold nanoclusters. The degree of chirality existing in the chiral clusters was calculated using the Hausdorff chirality measure. We found that the index of chirality is higher in the passivated clusters and decreases with the cluster size. These results are consistent with the observed chiroptical activity recently reported for glutahione-passivated gold nanoclusters, and provide theoretical support for the existence of chirality in these novel compounds.

  7. Nanoporous Gold: Fabrication, Characterization, and Applications

    Directory of Open Access Journals (Sweden)

    Michael L. Reed

    2009-12-01

    Full Text Available Nanoporous gold (np-Au has intriguing material properties that offer potential benefits for many applications due to its high specific surface area, well-characterized thiol-gold surface chemistry, high electrical conductivity, and reduced stiffness. The research on np-Au has taken place on various fronts, including advanced microfabrication and characterization techniques to probe unusual nanoscale properties and applications spanning from fuel cells to electrochemical sensors. Here, we provide a review of the recent advances in np-Au research, with special emphasis on microfabrication and characterization techniques. We conclude the paper with a brief outline of challenges to overcome in the study of nanoporous metals.

  8. Anisotropic Gold Nanocrystals:. Synthesis and Characterization

    Science.gov (United States)

    Stiufiuc, R.; Toderas, F.; Iosin, M.; Stiufiuc, G.

    In this letter we report on successful preparation and characterization of anisotropic gold nanocrystals bio-synthesized by reduction of aqueous chloroaurate ions in pelargonium plant extract. The nanocrystals have been characterized by means of Transmission Electron Microscopy (TEM), UV-VIS absorption spectroscopy and tapping mode atomic force microscopy (TM-AFM). Using these investigation techniques, the successful formation of anisotropic single nanocrystals with the preferential growth direction along the gold (111) plane has been confirmed. The high detail phase images could give us an explanation concerning the growth mechanism of the nanocrystals.

  9. Ligations of Gold Atoms with Iron Porphyrin

    DEFF Research Database (Denmark)

    Zhang, Ling; Kepp, Kasper Planeta; Ulstrup, Jens

    Gold is an exotic material with d-electrons deciding electronic mappings andconfigurations of adsorbed molecules. The specific interaction of Au atoms and S-, Ncappedmolecules make gold nanoparticles widely applied in the medicine transport andimmunoassay. Density functional theory demonstrates...... that the electronic structure ofAu adatoms is d9s1but not d10s0 in the forms of Au-thiolates. The surrounding Ausurface atoms are passivated leading to both Au-Au and S-S interactions. A wide range of surface phenomena of nanoparticle size-control and break-junctions in surface physics and chemistry including...

  10. Wages in California During the Gold Rush

    OpenAIRE

    Margo, Robert A.

    1997-01-01

    The California Gold Rush was an unexpected shock of tremendous size that prompted the costly re-allocation of labor to a frontier region. Using newly-collected archival data, this paper presents estimates of nominal and real wages in Gold Rush California. Consistent with a simple dynamic model of labor market adjustment, real wages rose sharply during the early years of the Rush (1848-1852), declined abruptly following massive in-migration 1850s. However, although the Rush itself was a transi...

  11. The effect of oil-water partition coefficient on the distribution and cellular uptake of liposome-encapsulated gold nanoparticles.

    Science.gov (United States)

    Bao, Quan-Ying; Liu, Ai-Yun; Ma, Yu; Chen, Huan; Hong, Jin; Shen, Wen-Bin; Zhang, Can; Ding, Ya

    2016-10-01

    The shape, size, and surface features of nanoparticles greatly influence the structure and properties of resulting hybrid nanosystems. In this work, gold nanoparticles (GNPs) were modified via S-Au covalent bonding by glycol monomethyl ether thioctate with poly(ethylene glycol) methyl ether of different molecular weights (i.e., 350, 550, and 750Da). These modified GNPs (i.e., GNP350, GNP550, and GNP750) showed different oil-water partition coefficients (Kp), as detected using inductively coupled plasma-atomic emission spectroscopy. The different Kp values of the gold conjugates (i.e., 13.98, 2.11, and 0.036 for GNP350, GNP550, and GNP750, respectively) resulted in different conjugate localization within liposomes, as observed by transmission electron microscopy. In addition, the cellular uptake of hybrid liposomes co-encapsulating gold conjugates and Nile red was evaluated using intracellular fluorescence intensity. The results indicated that precise GNP localization in the hydrophilic or hydrophobic liposome cavity could be achieved by regulating the GNP oil-water partition coefficient via surface modification; such localization could further affect the properties and functions of hybrid liposomes, including their cellular uptake profiles. This study furthers the understanding not only of the interaction between liposomes and inorganic nanoparticles but also of adjusting liposome-gold hybrid nanostructure properties via the surface chemistry of gold materials.

  12. Quantum Chemistry Calculations on the Interaction Between Kaolinite and Gold

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The density function and discrete variation method (DFT-DVM) is used to study the interaction between kaolinite and gold. The correlation among the structure, chemical bond and stability is discussed. Several models are selected without gold and with gold in different directions and sites. The results show that the models with gold on the edge of kaolinite basal layer are more stable than those with gold above or under the layer, the models with gold near to [AlO2(OH)4] octahedra are more stable than those with gold near to the vacancy without aluminium. The interaction between gold and the surface ions of kaolinite is strong enough to form the surface complexes.

  13. Effects of Quebracho Tannin on Recovery of Colloidal Gold from ...

    African Journals Online (AJOL)

    Michael

    2015-06-01

    Jun 1, 2015 ... Gold from Bioleached Wash Liquor”, Ghana Mining Journal, Vol. 15, No ... paper considered effects of Quebracho Tannin (QT) on recovery of gold from the oxidized flotation .... partial precipitation of iron which can help reduce.

  14. Rheumatoid arthritis, gold therapy, contact allergy and blood cytokines

    Science.gov (United States)

    Svensson, Åke; Möller, Halvor; Björkner, Bert; Bruze, Magnus; Leden, Ido; Theander, Jan; Ohlsson, Kjell; Linder, Carina

    2002-01-01

    Objective To study the clinical and biochemical effects of a low starting dose for gold therapy in rheumatoid arthritis patients with a contact allergy to gold. Methods Serum cytokines were assayed before and 24 h after the first injection of gold sodium thiomalate (GSTM). Results Contact allergy to gold was found in 4 of 19 patients. Compared to gold-negative patients (starting dose: 10 mg GSTM), there was a larger increase in serum TNFalpha (p < 0.05), sTNF-R1 (NS), and IL-1 ra (p < 0.05) in gold-allergic patients. Conclusions Cytokines are released in blood by GSTM in RA patients with gold allergy. To minimize the risk of acute adverse reactions the starting dose of GSTM should be lowered to 5 mg. Alternatively, patients should be patch-tested before gold therapy; in test-positive cases, 5 mg is recommended as the first dose. PMID:11860615

  15. Effectiveness of the Primextra Gold in controlling weeds of ...

    African Journals Online (AJOL)

    Effectiveness of the Primextra Gold in controlling weeds of Cucumber ( Cucumis Sativus L. ) ... Journal of Applied Sciences and Environmental Management ... The efficacy of Primextra Gold herbicide in controlling weeds in cucumber was ...

  16. Shape-controlled Synthesis of Gold Nanoparticles from Gold(III)-chelates of β-diketones

    Science.gov (United States)

    Kundu, Subrata; Pal, Anjali; Ghosh, Sujit Kumar; Nath, Sudip; Panigrahi, Sudipa; Praharaj, Snigdhamayee; Basu, Soumen; Pal, Tarasankar

    2005-12-01

    Chelating ligands with β-diketone skeleton have been employed for the first time as reductant to produce ligand stabilized gold nanoparticles of different shapes out of aqueous HAuCl4 solutions. Evolution of stable gold nanoparticles happens to be first order with respect to gold particles having rate constants ˜ ˜10-2 min-1 and subsequent chlorine insertion in the β-diketone skeleton is reported as a general feature. Spherical or triangular or hexagonal particle evolution goes selectively under the influence of different β-diketones in terms of capping and reducing capabilities of the reductants.

  17. Shape-controlled Synthesis of Gold Nanoparticles from Gold(III)-chelates of {beta}-diketones

    Energy Technology Data Exchange (ETDEWEB)

    Kundu, Subrata [Indian Institute of Technology, Department of Chemistry (India); Pal, Anjali [Indian Institute of Technology, Department of Civil Engineering (India); Ghosh, Sujit Kumar; Nath, Sudip; Panigrahi, Sudipa; Praharaj, Snigdhamayee; Basu, Soumen; Pal, Tarasankar [Indian Institute of Technology, Department of Chemistry (India)], E-mail: tpal@chem.iitkgp.ernet.in

    2005-12-15

    Chelating ligands with {beta}-diketone skeleton have been employed for the first time as reductant to produce ligand stabilized gold nanoparticles of different shapes out of aqueous HAuCl{sub 4} solutions. Evolution of stable gold nanoparticles happens to be first order with respect to gold particles having rate constants {approx}{approx}10{sup -2} min{sup -1} and subsequent chlorine insertion in the {beta}-diketone skeleton is reported as a general feature. Spherical or triangular or hexagonal particle evolution goes selectively under the influence of different {beta}-diketones in terms of capping and reducing capabilities of the reductants.

  18. Antibacterial Activity and Cytotoxicity of Gold (I) and (III) Ions and Gold Nanoparticles

    OpenAIRE

    Shareena Dasari, TP; Zhang, Y; Yu, H.

    2015-01-01

    Gold nanoparticles (AuNPs) and gold ion complexes have been investigated for their antibacterial activities. However, the majority of the reports failed to disclose the concentration of free Au(I) or Au(III) present in solutions of AuNPs or gold ion complexes. The inconsistency of antibacterial activity of AuNPs may be due to the effect of the presence of Au(III). Here we report the antibacterial activity of Au(I) and Au(III) to four different bacteria: one nonpathogenic bacterium: E. coli an...

  19. Electrosurgical plasmas

    Science.gov (United States)

    Stalder, Kenneth R.; McMillen, Donald F.; Woloszko, Jean

    2005-06-01

    Electrosurgical medical devices based on repetitively pulsed nonequilibrium micron-scale to millimetre-scale plasma discharges in saline solutions are described. The formation of vapour layers (bubbles) around active electrodes appears to be a common feature at moderate (<300 V rms) voltages, and dissociation, excitation and ionization of the vapour in these bubbles produces chemical conditions that are thought to be the source of beneficial tissue removal and treatment. Experimental data are discussed, as are the results of modelling efforts of the plasma chemistry. Hydroxyl radicals, hydrogen atoms and other species are observed spectroscopically and their interactions with collagen, a common component of tissue encountered in surgical situations, are considered. Several pathways by which hydroxyl radicals interacting with collagen can lead to tissue removal are discussed.

  20. Electrosurgical plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Stalder, Kenneth R; McMillen, Donald F; Woloszko, Jean [ArthroCare Corp., Sunnyvale, CA 94085-3523 (United States)

    2005-06-07

    Electrosurgical medical devices based on repetitively pulsed nonequilibrium micron-scale to millimetre-scale plasma discharges in saline solutions are described. The formation of vapour layers (bubbles) around active electrodes appears to be a common feature at moderate (<300 V rms) voltages, and dissociation, excitation and ionization of the vapour in these bubbles produces chemical conditions that are thought to be the source of beneficial tissue removal and treatment. Experimental data are discussed, as are the results of modelling efforts of the plasma chemistry. Hydroxyl radicals, hydrogen atoms and other species are observed spectroscopically and their interactions with collagen, a common component of tissue encountered in surgical situations, are considered. Several pathways by which hydroxyl radicals interacting with collagen can lead to tissue removal are discussed.

  1. Plasma physics

    CERN Document Server

    Cairns, R A

    1985-01-01

    This book is intended as an introduction to plasma physics at a level suitable for advanced undergraduates or beginning postgraduate students in physics, applied mathematics or astrophysics. The main prerequisite is a knowledge of electromagnetism and of the associated mathematics of vector calculus. SI units are used throughout. There is still a tendency amongst some plasma physics researchers to· cling to C.g.S. units, but it is the author's view that universal adoption of SI units, which have been the internationally agreed standard since 1960, is to be encouraged. After a short introductory chapter, the basic properties of a plasma con­ cerning particle orbits, fluid theory, Coulomb collisions and waves are set out in Chapters 2-5, with illustrations drawn from problems in nuclear fusion research and space physics. The emphasis is on the essential physics involved and (he theoretical and mathematical approach has been kept as simple and intuitive as possible. An attempt has been made to draw attention t...

  2. Irradiation stability and cytotoxicity of gold nanoparticles for radiotherapy

    OpenAIRE

    Zhang, Xiao-Dong; Guo, Mei-Li; Wu, Hong-Ying; Sun, Yuan-Ming; Ding, Yan-Qiu; Feng, Xin; Zhang, Liang-An

    2009-01-01

    Gold nanoparticles are promising as a kind of novel radiosensitizer in radiotherapy. If gold nanoparticles are shown to have good irradiation stability and biocompatibility, they would play an important role in radiotherapy. In this work, we investigated irradiation effects of gold nanoparticles under 2–10 kR gamma irradiation and cytotoxicity of gold nanoparticles with human K562 cells by using Cell Titre-Glo™ luminescent cell viability assay. The results revealed that gamma irradiation had ...

  3. Plasma pharmacy - physical plasma in pharmaceutical applications.

    Science.gov (United States)

    von Woedtke, Th; Haertel, B; Weltmann, K-D; Lindequist, U

    2013-07-01

    During the last years the use of physical plasma for medical applications has grown rapidly. A multitude of findings about plasma-cell and plasma-tissue interactions and its possible use in therapy have been provided. One of the key findings of plasma medical basic research is that several biological effects do not result from direct plasma-cell or plasma-tissue interaction but are mediated by liquids. Above all, it was demonstrated that simple liquids like water or physiological saline, are antimicrobially active after treatment by atmospheric pressure plasma and that these effects are attributable to the generation of different low-molecular reactive species. Besides, it could be shown that plasma treatment leads to the stimulation of specific aspects of cell metabolism and to a transient and reversible increase of diffusion properties of biological barriers. All these results gave rise to think about another new and innovative field of medical plasma application. In contrast to plasma medicine, which means the direct use of plasmas on or in the living organism for direct therapeutic purposes, this field - as a specific field of medical plasma application - is called plasma pharmacy. Based on the present state of knowledge, most promising application fields of plasma pharmacy might be: plasma-based generation of biologically active liquids; plasma-based preparation, optimization, or stabilization of - mainly liquid - pharmaceutical preparations; support of drug transport across biological barriers; plasma-based stimulation of biotechnological processes.

  4. Early Yellowstone hotspot magmatism and gold metallogeny

    Science.gov (United States)

    Hames, Willis; Unger, Derick; Saunders, James; Kamenov, George

    2009-11-01

    High-grade epithermal gold deposits in the Northern Great Basin have long been associated with regional Miocene basaltic to rhyolitic volcanism. Previous models for the low-sulfidation epithermal gold ores in this region have generally portrayed the bimodal magmas as a source of heat to drive large-scale convection of meteoritic water that leached gold from crustal sources and deposited it in hydrothermal vein systems, or required that the gold evolve from fractionated silicic magmas. New data of the present study indicate a more direct genetic link to the plume-related basaltic magmas of the region. Laser 40Ar/ 39Ar incremental heating plateau ages for single crystals of adularia from several of these low-sulfidation epithermal gold deposits range from 16.6 Ma to 15.5 Ma. Adularia from the Jumbo deposit yields three concordant plateau ages with a combined statistical result of 16.54 ± 0.04 Ma (95% confidence level, MSWD = 0.23). Plateau ages for adularia from other deposits in the region, and from gold-bearing veins in the Owyhee Mountains of southwestern Idaho, yield similar ages up to ~16.5 Ma, however some veins are as young as ca. 15.5 Ma and the grain-to-grain ages for a given sample can vary by up to ca. 0.5 Ma. Observed variations in age among the adularia crystals of a given rock sample indicate varying amounts of extraneous argon, and also loss of radiogenic 40Ar, among the population of grains for a particular sample. The single-crystal results are interpreted to indicate a 16.5-15.5 Ma interval for formation of gold-bearing adularia veins in the region. The initiation and duration of this gold-forming event appears contemporaneous (within uncertainties) with the basaltic volcanism at the Steens Mountain section and an ensuing one-million-year episode of basaltic volcanism from multiple centers in the region ( Brueseke et al., 2007). Trace amounts of lead are alloyed with gold in the deposits studied. The isotopic compositions of this lead are not

  5. HUNTING THE QUARK GLUON PLASMA.

    Energy Technology Data Exchange (ETDEWEB)

    LUDLAM, T.; ARONSON, S.

    2005-04-11

    The U.S. Department of Energy's Relativistic Heavy Ion Collider (RHIC) construction project was completed at BNL in 1999, with the first data-taking runs in the summer of 2000. Since then the early measurements at RHIC have yielded a wealth of data, from four independent detectors, each with its international collaboration of scientists: BRAHMS, PHENIX, PHOBOS, and STAR [1]. For the first time, collisions of heavy nuclei have been carried out at colliding-beam energies that have previously been accessible only for high-energy physics experiments with collisions of ''elementary'' particles such as protons and electrons. It is at these high energies that the predictions of quantum chromodynamics (QCD), the fundamental theory that describes the role of quarks and gluons in nuclear matter, come into play, and new phenomena are sought that may illuminate our view of the basic structure of matter on the sub-atomic scale, with important implications for the origins of matter on the cosmic scale. The RHIC experiments have recorded data from collisions of gold nuclei at the highest energies ever achieved in man-made particle accelerators. These collisions, of which hundreds of millions have now been examined, result in final states of unprecedented complexity, with thousands of produced particles radiating from the nuclear collision. All four of the RHIC experiments have moved quickly to analyze these data, and have begun to understand the phenomena that unfold from the moment of collision as these particles are produced. In order to provide benchmarks of simpler interactions against which to compare the gold-gold collisions, the experiments have gathered comparable samples of data from collisions of a very light nucleus (deuterium) with gold nuclei, as well as proton-proton collisions, all with identical beam energies and experimental apparatus. The early measurements have revealed compelling evidence for the existence of a new form of nuclear

  6. A handheld low temperature atmospheric pressure air plasma gun for nanomaterial synthesis in liquid phase

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Shuang; Wang, Kaile; Zuo, Shasha; Liu, Jiahui [Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871 (China); Zhang, Jue, E-mail: zhangjue@pku.edu.cn; Fang, Jing [Academy for Advanced Interdisciplinary Studies, Peking University, Beijing 100871 (China); College of Engineering, Peking University, Beijing 100871 (China)

    2015-10-15

    A handheld low temperature atmospheric pressure air plasma gun based on a dielectric barrier structure with hollow electrodes was proposed. The portable plasma gun with an embedded mini air pump was driven by a 12 V direct voltage battery. The air plasma jet generated from the gun could be touched without a common shock hazard. Besides working in air, the plasma gun can also work in water. The diagnostic result of optical emission spectroscopy showed the difference in reactive species of air plasma jet between in air and in water. The plasma gun was excited in 20 ml chloroauric acid aqueous solution with a concentration of 1.214 mM. A significant amount of gold nanoparticles were synthesized after 2 min continuous discharge. The plasma gun with these unique features is applicable in plasma medicine, etching, and s-nthesis of nanomaterials.

  7. Photoluminescence of hollow gold-silver bimetallic nanoparticles

    OpenAIRE

    Weon-Sik Chae; Hee-Ok Lee; Seung-Lim Oh

    2011-01-01

    Hollow gold nanoparticles including silver were prepared by the galvanic replacement reaction of silver nanoparticles by gold. The resulting hollow gold-silver bimetallic nanoparticles show notable blue-green emissions, which are studied using steady-state and time-resolved spectroscopy.

  8. Controlled synthesis and optical properties of pure gold nanoparticles

    NARCIS (Netherlands)

    Singh, A.K.; Rai, A.K.; Bicanic, D.D.

    2009-01-01

    Gold nanoparticles were synthesized by laser ablation of a gold metallic disc at wavelengths of 532 nm and 355 nm with 7 ns pulse duration in the pure water. The colloidal gold nanoparticles were characterized by ultraviolet-visible absorption spectroscopy, transmission electron microscopy, and

  9. Controlled synthesis and optical properties of pure gold nanoparticles

    NARCIS (Netherlands)

    Singh, A.K.; Rai, A.K.; Bicanic, D.D.

    2009-01-01

    Gold nanoparticles were synthesized by laser ablation of a gold metallic disc at wavelengths of 532 nm and 355 nm with 7 ns pulse duration in the pure water. The colloidal gold nanoparticles were characterized by ultraviolet-visible absorption spectroscopy, transmission electron microscopy, and fluo

  10. Gold nanoparticles: preparation, functionalisation and applications in biochemistry and immunochemistry

    Energy Technology Data Exchange (ETDEWEB)

    Dykman, Lev A; Bogatyrev, Vladimir A [Institute of Biochemistry and Physiology of Plants and Microorganisms, Russian Academy of Sciences (Russian Federation)

    2007-02-28

    The review summarises data on the synthesis and functionalisation of gold nanoparticles and their applications in biological investigations. Particular attention is given to applications of colloidal gold in solid-phase assays, immunoassay and studies of biologically active compounds by vibrational spectroscopy. A special section deals with the use of gold nanoparticles as antigen carriers in immunisation.

  11. The Largest Gold Mine in Asia was Found in Gansu

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>Recently,at Yangshan,a place bordering with Shaanxi and Sichuan provinces,of Wen County in Gansu Province,the largest gold mine in Asia was found with proved gold reserve of 308 tons,changing the history of having no super large independent gold deposits over 200 tons in China.

  12. Photoluminescence of hollow gold-silver bimetallic nanoparticles

    Directory of Open Access Journals (Sweden)

    Weon-Sik Chae

    2011-12-01

    Full Text Available Hollow gold nanoparticles including silver were prepared by the galvanic replacement reaction of silver nanoparticles by gold. The resulting hollow gold-silver bimetallic nanoparticles show notable blue-green emissions, which are studied using steady-state and time-resolved spectroscopy.

  13. Gold-coated nanoparticles for use in biotechnology applications

    Science.gov (United States)

    Berning, Douglas E.; Kraus, Jr., Robert H.; Atcher, Robert W.; Schmidt, Jurgen G.

    2007-06-05

    A process of preparing gold-coated magnetic nanoparticles is disclosed and includes forming a suspension of magnetic nanoparticles within a suitable liquid, adding an amount of a reducible gold compound and a reducing agent to the suspension, and, maintaining the suspension for time sufficient to form gold-coated magnetic nanoparticles.

  14. 21 CFR 872.3350 - Gold or stainless steel cusp.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Gold or stainless steel cusp. 872.3350 Section 872...) MEDICAL DEVICES DENTAL DEVICES Prosthetic Devices § 872.3350 Gold or stainless steel cusp. (a) Identification. A gold or stainless steel cusp is a prefabricated device made of austenitic alloys or...

  15. Gold in meteorites and in the earth's crust

    Science.gov (United States)

    Jones, Robert Sprague

    1968-01-01

    The reported gold contents of meteorites range from 0.0003 to 8.74 parts per million. Gold is siderophilic, and the greatest amounts in meteorites are in the iron phases. Estimates ,of the gold content of the earth's crust are in the range of 0.001 to 0.006 parts per million.

  16. Noble gases, K, U, Th, and Pb in native gold

    Science.gov (United States)

    Engster, O.; Niedermann, S.; Thalmann, C.; Frei, R.; Kramers, J.; KräHenbühl, U.; Liu, Y. Z.; Hofmann, B.; Boer, R. H.; Reimold, W. U.; Bruno, L.

    1995-12-01

    We present determinations of the noble gas and Pb isotopic abundances and of K, Th, and U concentrations of native gold. Our results demonstrate that gold is an excellent carrier for crustal volatiles, but direct dating of gold using the U, Th-4He, 40K-40Ar, and U fission Xe methods was not successful for various reasons. The main significance of this work is the great sensitivity of gold for trapped gases as well as for gases that were produced in situ which gives the prospects of using gold and its fluid and solid inclusions for the study of paleogas composition. Numerous nuclear effects characterize the noble gas inventory of placer gold from Switzerland and Italy, vein gold from Italy, South Africa, and Venezuela, and lode gold from South Africa. The degassing patterns obtained by mass spectrometry show a low-temperature release of volatiles around 500°C from fluid inclusions mainly in vein gold and a high-temperature release from solid inclusions and the gold itself. The low-temperature volatiles represent species that were trapped when the gold crystallized. We investigated the following trapped species: the isotopes of He, Ne, Ar, Kr, Xe, and Pb, and the abundances of K, U, Th, H2O, and CO2. The crustal gases trapped by gold comprise 3He from 6Li(n,α)3H → β- → 3He, 4He and 40Ar from the U, Th, and K decay, and Xe from 238U fission. We observe 4He/40Ar = 3.9 for the radiogenic trapped gases of tertiary gold and a ratio of 1.4 for Archean gold. These ratios are consistent with the production ratios from U and K at the respective times and demonstrate that gold can be used as a sampler of ancient atmospheric gases. The concentrations of U and Th range from a few parts per billion to a few parts per million, and those of K and Pb range up to some tens of parts per million. The antiquity of trapped Pb is indicated by the Pb-Pb model age of about 3000 Ma for the lead extracted from vein gold and quartz of the Lily gold mine (South Africa). Gold also

  17. The Physico-Chemical Conditions for Mobilization of Gold in Mobin Gold Deposit, Southwest Hunan, China

    Institute of Scientific and Technical Information of China (English)

    谷俐; 杨华; 戴塔根; 刘利萍

    2002-01-01

    Experiments on water-rock interaction were carried out on wall-rock samples from the Mobin gold deposit, Southwest Hunan, China, with the aim of determining the optimum physical and chemical conditions for the mobilization of gold in solution. Results indicate that gold is most easily mobilized from the wall rock-tuffaceous slate of the Mobin Deposit. Mobi lization is optimized if fluids are neutral to slightly alkaline and contain both chlorine and sulphur ions at the concentration and composition of about [0.25M (NH4)2S + 1M NaCl]. The amount of gold leached from the tuffaceous slate increases with temperature although the effect decreases above about 200℃ .

  18. Infrared light-absorbing gold/gold sulfide nanoparticles induce cell death in esophageal adenocarcinoma

    Science.gov (United States)

    Li, Yan; Gobin, Andre M; Dryden, Gerald W; Kang, Xinqin; Xiao, Deyi; Li, Su Ping; Zhang, Guandong; Martin, Robert CG

    2013-01-01

    Gold nanoparticles and near infrared-absorbing light are each innocuous to tissue but when combined can destroy malignant tissue while leaving healthy tissue unharmed. This study investigated the feasibility of photothermal ablation therapy for esophageal adenocarcinoma using chitosan-coated gold/gold sulfide (CS-GGS) nanoparticles. A rat esophagoduodenal anastomosis model was used for the in vivo ablation study, and three human esophageal cell lines were used to study the response of cancer cells and benign cells to near infrared light after treatment with CS-GGS. The results indicate that both cancerous tissue and cancer cells took up more gold nanoparticles and were completely ablated after exposure to near infrared light. The benign tissue and noncancerous cells showed less uptake of these nanoparticles, and remained viable after exposure to near infrared light. CS-GGS nanoparticles could provide an optimal endoluminal therapeutic option for near infrared light ablation of esophageal cancer. PMID:23818775

  19. Self-assembled gold nanoparticles on functionalized gold(111) studied by scanning tunneling microscopy

    Institute of Scientific and Technical Information of China (English)

    PENG, Zhang-Quan; WANG, Er-Kang

    2000-01-01

    Nanogold colloidal solutions are prepared by the reduction of HAuClO4 with sodium citrate and sodium borohydride. 4- Aminothiophenol (ATP) self-assembled monolayers (SAMs) are formed on gold(111) surface, on which gold nanoparticles are immobilized and a sub-monolayer of the particles appears. This sub-monolayer of gold nanoparticles is characterized with scanning tunneling microscopy (STM), and a dual energy barrier tunneling model is proposed to explain the imgeability of the gold nanoparticles by STM. This model can also be used to construct multiple energy barrier structure on solid/ liquid interface and to evaluate the electron transport ability of some organic monolayers with the aid of electrochemical method.

  20. Gold-Catalyzed Reactions via Cyclopropyl Gold Carbene-like Intermediates.

    Science.gov (United States)

    Dorel, Ruth; Echavarren, Antonio M

    2015-08-07

    Cycloisomerizations of 1,n-enynes catalyzed by gold(I) proceed via electrophilic species with a highly distorted cyclopropyl gold(I) carbene-like structure, which can react with different nucleophiles to form a wide variety of products by attack at the cyclopropane or the carbene carbons. Particularly important are reactions in which the gold(I) carbene reacts with alkenes to form cyclopropanes either intra- or intermolecularly. In the absence of nucleophiles, 1,n-enynes lead to a variety of cycloisomerized products including those resulting from skeletal rearrangements. Reactions proceeding through cyclopropyl gold(I) carbene-like intermediates are ideally suited for the bioinspired synthesis of terpenoid natural products by the selective activation of the alkyne in highly functionalized enynes or polyenynes.

  1. Plasmonic biocompatible silver-gold alloyed nanoparticles.

    Science.gov (United States)

    Sotiriou, Georgios A; Etterlin, Gion Diego; Spyrogianni, Anastasia; Krumeich, Frank; Leroux, Jean-Christophe; Pratsinis, Sotiris E

    2014-11-14

    The addition of Au during scalable synthesis of nanosilver drastically minimizes its surface oxidation and leaching of toxic Ag(+) ions. These biocompatible and inexpensive silver-gold nanoalloyed particles exhibit superior plasmonic performance than commonly used pure Au nanoparticles, and as such these nanoalloys have great potential in theranostic applications.

  2. CAS expert receives Tribology Gold Medal

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    Prof. XUE Qunji, a senior expert in tribology from the CAS Lanzhou Institute of Chemical Physics (L1CP) and member of the Chinese Academy of Engineering, received the Tribology Gold Medalfor 2011 on February 27, 2012 in Beijing. As one of the world's most outstanding and influential tribologists in the last forty years, Prof.

  3. Opposition to gold mining at Bergama, Turkey

    NARCIS (Netherlands)

    M. Arsel (Murat)

    2012-01-01

    textabstractIntroduction For much of the 1990s, the tourist town of Bergama was the epicentre of Turkey's most effective and visible environmental social movement against a multinational mining corporation aiming to establish the first modern gold mine in the country. Bringing

  4. Optical properties of spherical gold mesoparticles

    DEFF Research Database (Denmark)

    Evlyukhin, A. B.; Kuznetsov, A. I.; Novikov, S. M.;

    2012-01-01

    Optical properties of spherical gold particles with diameters of 150-650 nm (mesoparticles) are studied by reflectance spectroscopy. Particles are fabricated by laser-induced transfer of metallic droplets onto metal and dielectric substrates. Contributions of higher multipoles (beyond the quadrup...

  5. Opposition to gold mining at Bergama, Turkey

    NARCIS (Netherlands)

    M. Arsel (Murat)

    2012-01-01

    textabstractIntroduction For much of the 1990s, the tourist town of Bergama was the epicentre of Turkey's most effective and visible environmental social movement against a multinational mining corporation aiming to establish the first modern gold mine in the country. Bringing relatively prosperous

  6. Poly-thiosemicarbazide membrane for gold recovery

    KAUST Repository

    Villalobos, Luis Francisco

    2014-11-01

    A novel polymeric membrane adsorber with a high density of adsorption sites that can selectively capture Au(III) ions, is proposed as an efficient alternative to recover gold from dilute solutions. Poly-thiosemicarbazide (PTSC), a polymer that contains one chelate site per monomeric unit, was used to fabricate the membranes. This polymer can be easily processed into membranes by a phase inversion technique, resulting in an open and interconnected porous structure suitable for high flux liquid phase applications. This method overcomes the usual low capacities of membrane adsorbents by selecting a starting material that contains the adsorption sites within it, therefore avoiding the necessity to add an external agent into the membrane matrix. The resulting mechanically stable PTSC membranes can operate in a pressure driven permeation process, which eliminates the diffusion limitations commonly present in packed column adsorption processes. This process can selectively recover 97% of the gold present in a solution containing a 9-fold higher copper concentration, while operating at a flux as high as 1868 L/m2 h. The maximum gold uptake measured without sacrificing the mechanical stability of the membrane was 5.4 mmol Au/g. Furthermore the gold can be easily eluted from the membrane with a 0.1 M thiourea solution and the membrane can be reused for at least three cycles without any decrease in its performance. Finally, the ability of this membrane for recovering metals from real-life samples, like seawater and tap water, was tested with promising results.

  7. Photosynthetic light reactions at the gold interface

    NARCIS (Netherlands)

    Kamran, Muhammad

    2014-01-01

    In the project described in this thesis we studied a simple bio-electronic device for solar energy conversion by surface-assembly of photosynthetic pigment-protein complexes on a bare gold-electrode. Optical excitation of the photosynthetic pigments gives rise to charge separation in the so-called

  8. Surface interactions between gold nanoparticles and biochar

    Science.gov (United States)

    Engineered nanomaterials are directly applied to agricultural soils as a part of pesticide/fertilize formulations and sludge/manure amendments. Yet, no prior reports are available on the extent and reversibility of gold nanoparticles (nAu) retention by soil components including charcoal black carbo...

  9. Photosynthetic light reactions at the gold interface

    NARCIS (Netherlands)

    Kamran, Muhammad

    2014-01-01

    In the project described in this thesis we studied a simple bio-electronic device for solar energy conversion by surface-assembly of photosynthetic pigment-protein complexes on a bare gold-electrode. Optical excitation of the photosynthetic pigments gives rise to charge separation in the so-called r

  10. Photothermal fluctuation spectroscopy on gold nanoparticle dimers

    Energy Technology Data Exchange (ETDEWEB)

    Waehnert, Miriam; Neubauer, Nils; Raduenz, Romy; Cichos, Frank [Molecular Nanophotonics Group, University of Leipzig, Linnestrasse 5, 04103 Leipzig (Germany)

    2009-07-01

    To measure distance changes on the nanoscale, FRET (Fluorescence resonance energy transfer) is a heavily applied technique in biophysical studies. The upper limit of distance fluctuations being measured with this method is about 10 nm. Furthermore it suffers from photochemical degradation mechanisms like blinking and bleaching of the energy transferring dye molecules. We report on recent experiments using pairs of gold nanoparticles as absorbing markers replacing dye molecules. Gold particles are strongly interacting with light, if they are excited near the plasmon resonance. The resulting dipoles of two closely spaced gold nanoparticles can couple to form a new resonance, which appears in the absorption as a distinct feature. The strength of this absorption depends on the distance of the two particles and is visible up to a few 10 nm, which clearly exceeds the lengthscale of FRET. The gold nanoparticles are detected by photothermal heterodyne detection, using the release of heat from the absorbing particles to create a local refractive index change around them, which can be probed with a confocal laser scanning setup. Due to the plasmon coupling a fluctuating distance will result in a fluctuating photothermal signal. Numerical analyses of the spectra together with first experimental results will be presented.

  11. Unambiguous optical characterization of nanocolloidal gold films

    NARCIS (Netherlands)

    Wormeester, Herbert; Kooij, E. Stefan; Poelsema, Bene

    2003-01-01

    The thin island film theory developed by Bedeaux and Vlieger [Optical Properties of Surface (Imperial College Press (2002)], is used to unambiguously analyze spectroscopic ellipsometry spectra of thin layers of nanocolloidal gold particles on silicon substrates covered by a natural oxide layer, for

  12. High-energy band structure of gold

    DEFF Research Database (Denmark)

    Christensen, N. Egede

    1976-01-01

    The band structure of gold for energies far above the Fermi level has been calculated using the relativistic augmented-plane-wave method. The calculated f-band edge (Γ6-) lies 15.6 eV above the Fermi level is agreement with recent photoemission work. The band model is applied to interpret...

  13. Dynamic breaking of a single gold bond

    DEFF Research Database (Denmark)

    Pobelov, Ilya V.; Lauritzen, Kasper Primdal; Yoshida, Koji

    2017-01-01

    . Conversely, if the force is loaded rapidly it is more likely that the maximum breaking force is measured. Paradoxically, no clear differences in breaking force were observed in experiments on gold nanowires, despite being conducted under very different conditions. Here we explore the breaking behaviour...

  14. GOLD WEIGHTS IN FACIAL PARALYSIS (REVISITED)

    NARCIS (Netherlands)

    ZECHA, PJ; ROBINSON, PH; VANOORT, RP; COENRAADS, PJ

    1994-01-01

    A retrospective study of 11 patients with facial paralysis was undertaken. Correction of lagophthalmos was accomplished by inserting a dental gold weight into the upper eyelid. All weights were assessed and adjusted to fit the patient's individual need. The primary objective was to achieve adequate

  15. GOLD WEIGHTS IN FACIAL PARALYSIS (REVISITED)

    NARCIS (Netherlands)

    ZECHA, PJ; ROBINSON, PH; VANOORT, RP; COENRAADS, PJ

    A retrospective study of 11 patients with facial paralysis was undertaken. Correction of lagophthalmos was accomplished by inserting a dental gold weight into the upper eyelid. All weights were assessed and adjusted to fit the patient's individual need. The primary objective was to achieve adequate

  16. Plasmonic photothermal therapy (PPTT) using gold nanoparticles.

    Science.gov (United States)

    Huang, Xiaohua; Jain, Prashant K; El-Sayed, Ivan H; El-Sayed, Mostafa A

    2008-07-01

    The use of lasers, over the past few decades, has emerged to be highly promising for cancer therapy modalities, most commonly the photothermal therapy method, which employs light absorbing dyes for achieving the photothermal damage of tumors, and the photodynamic therapy, which employs chemical photosensitizers that generate singlet oxygen that is capable of tumor destruction. However, recent advances in the field of nanoscience have seen the emergence of noble metal nanostructures with unique photophysical properties, well suited for applications in cancer phototherapy. Noble metal nanoparticles, on account of the phenomenon of surface plasmon resonance, possess strongly enhanced visible and near-infrared light absorption, several orders of magnitude more intense compared to conventional laser phototherapy agents. The use of plasmonic nanoparticles as highly enhanced photoabsorbing agents has thus introduced a much more selective and efficient cancer therapy strategy, viz. plasmonic photothermal therapy (PPTT). The synthetic tunability of the optothermal properties and the bio-targeting abilities of the plasmonic gold nanostructures make the PPTT method furthermore promising. In this review, we discuss the development of the PPTT method with special emphasis on the recent in vitro and in vivo success using gold nanospheres coupled with visible lasers and gold nanorods and silica-gold nanoshells coupled with near-infrared lasers.

  17. WILLIAM GOLDING'S NOVEL--THE BACKWARD LOOK.

    Science.gov (United States)

    PECK, CAROL FAULKNER

    THE "SURPRISE ENDINGS" IN EACH OF WILLIAM GOLDING'S FIRST FOUR NOVELS OCCUR WHEN THE POINT OF VIEW SHIFTS FROM THE LIMITED WORLD OF THE NOVEL TO THE UNLIMITED WORLD OF REALITY. THE BOYS' RESCUE BY THE UNCOMPREHENDING OFFICER IN "LORD OF THE FLIES," REFOCUSES AND REINFORCES ALL THAT PRECEDES IT, AND THE FABLE, SUPERIMPOSED UPON REAL LIFE, BECOMES…

  18. Gold ratio and a trigonometric identity

    OpenAIRE

    Shevelev, Vladimir

    2009-01-01

    We give two proofs of the identity $$\\sqrt{\\frac{\\cos\\frac{2\\pi}{5}} {\\cos\\frac{\\pi}{5}}}+\\sqrt{\\frac{\\cos\\frac{\\pi}{5}} {\\cos\\frac{2\\pi}{5}} }=\\sqrt{5},$$ using and not using the gold ratio.

  19. Heterodyne holographic microscopy of gold particles

    CERN Document Server

    Atlan, Michael; Desbiolles, Pierre; Absil, Emilie; Tessier, Gilles; Coppey-Moisan, Maité

    2007-01-01

    We report experimental results on heterodyne holographic microscopy of subwavelength-sized gold particles. The apparatus uses continuous green laser illumination of the metal beads in a total internal reflection configuration for dark-field operation. Detection of the scattered light at the illumination wavelength on a charge-coupled device array detector enables 3D localization of brownian particles in water

  20. Hydroquinone Based Synthesis of Gold Nanorods.

    Science.gov (United States)

    Picciolini, Silvia; Mehn, Dora; Ojea-Jiménez, Isaac; Gramatica, Furio; Morasso, Carlo

    2016-08-10

    Gold nanorods are an important kind of nanoparticles characterized by peculiar plasmonic properties. Despite their widespread use in nanotechnology, the synthetic methods for the preparation of gold nanorods are still not fully optimized. In this paper we describe a new, highly efficient, two-step protocol based on the use of hydroquinone as a mild reducing agent. Our approach allows the preparation of nanorods with a good control of size and aspect ratio (AR) simply by varying the amount of hexadecyl trimethylammonium bromide (CTAB) and silver ions (Ag(+)) present in the "growth solution". By using this method, it is possible to markedly reduce the amount of CTAB, an expensive and cytotoxic reagent, necessary to obtain the elongated shape. Gold nanorods with an aspect ratio of about 3 can be obtained in the presence of just 50 mM of CTAB (versus 100 mM used in the standard protocol based on the use of ascorbic acid), while shorter gold nanorods are obtained using a concentration as low as 10 mM.