Evaluation of a Modified User Guide for Hearing Aid Management.

Science.gov (United States)

Caposecco, Andrea; Hickson, Louise; Meyer, Carly; Khan, Asaduzzaman

2016-01-01

This study investigated if a hearing aid user guide modified using best practice principles for health literacy resulted in superior ability to perform hearing aid management tasks, compared with the user guide in the original form. This research utilized a two-arm study design to compare the original manufacturer's user guide with a modified user guide for the same hearing aid--an Oticon Acto behind-the-ear aid with an open dome. The modified user guide had a lower reading grade level (4.2 versus 10.5), used a larger font size, included more graphics, and had less technical information. Eighty-nine adults ages 55 years and over were included in the study; none had experience with hearing aid use or management. Participants were randomly assigned either the modified guide (n = 47) or the original guide (n = 42). All participants were administered the Hearing Aid Management test, designed for this study, which assessed their ability to perform seven management tasks (e.g., change battery) with their assigned user guide. The regression analysis indicated that the type of user guide was significantly associated with performance on the Hearing Aid Management test, adjusting for 11 potential covariates. In addition, participants assigned the modified guide required significantly fewer prompts to perform tasks and were significantly more likely to perform four of the seven tasks without the need for prompts. The median time taken by those assigned the modified guide was also significantly shorter for three of the tasks. Other variables associated with performance on the Hearing Aid Management test were health literacy level, finger dexterity, and age. Findings indicate that the need to design hearing aid user guides in line with best practice principles of health literacy as a means of facilitating improved hearing aid management in older adults.

SALOME. User's guide

International Nuclear Information System (INIS)

Zastrow, K.D.

1994-01-01

A user's guide for a least squares fit analysis program is presented, which has been developed for VUV and visible plasma spectroscopy on the Extrap-T1 experiment. The program can be used for line and multiplet identification, multiplet intensity and line width measurements. Atomic data are used extensively to aid the interpretation of the spectra. 7 figs

Presto 2.9 user's guide.

Energy Technology Data Exchange (ETDEWEB)

Jung, Joseph

2008-05-01

Presto is a Lagrangian, three-dimensional explicit, transient dynamics code that is used to analyze solids subjected to large, suddenly applied loads. The code is designed for a parallel computing environment and for problems with large deformations, nonlinear material behavior, and contact. Presto also has a versatile element library that incorporates both continuum elements and structural elements. This user's guide describes the input for Presto that gives users access to all the current functionality in the code. The environment in which Presto is built allows it to be coupled with other engineering analysis codes. Using a concept called scope, the input structure reflects the fact that Presto can be used in a coupled environment. The user's guide describes how scope is implemented from the outermost to the innermost scopes. Within a given scope, the descriptions of input commands are grouped based on functionality of the code. For example, all material input command lines are described in a chapter of the user's guide for all the material models that can be used in Presto.

Presto 4.18 user's guide.

Energy Technology Data Exchange (ETDEWEB)

Spencer, Benjamin Whiting

2010-09-01

Presto is a Lagrangian, three-dimensional explicit, transient dynamics code that is used to analyze solids subjected to large, suddenly applied loads. The code is designed for a parallel computing environment and for problems with large deformations, nonlinear material behavior, and contact. Presto also has a versatile element library that incorporates both continuum elements and structural elements. This user's guide describes the input for Presto that gives users access to all the current functionality in the code. The environment in which Presto is built allows it to be coupled with other engineering analysis codes. Using a concept called scope, the input structure reflects the fact that Presto can be used in a coupled environment. The user's guide describes how scope is implemented from the outermost to the innermost scopes. Within a given scope, the descriptions of input commands are grouped based on functionality of the code. For example, all material input command lines are described in a chapter of the user's guide for all the material models that can be used in Presto.

SNAP Operating System (SOS) user's guide

International Nuclear Information System (INIS)

Sabuda, J.D.; Polito, J.; Walker, J.L.; Grant, F.H. III.

1982-03-01

The SNAP Operating System (SOS) is a FORTRAN 77 program which provides assistance to the safeguards analyst who uses the Safeguards Automated Facility Evaluation (SAFE) and the Safeguards Network Analysis Procedure (SNAP) techniques. Features offered by SOS are a data base system for storing a library of SNAP applications, computer graphics representation of SNAP models, a computer graphics editor to develop and modify SNAP models, a SAFE-to-SNAP interface, automatic generation of SNAP input data, and a computer graphics postprocessor for SNAP. The SOS User's Guide is designed to provide the user with the information necessary to use SOS effectively. Examples are used throughout to illustrate the concepts. The format of the user's guide follows the same sequence as would be used in executing an actual application

SAGE FOR MACINTOSH (MSAGE) VERSION 1.0 SOLVENT ALTERNATIVES GUIDE - USER'S GUIDE

Science.gov (United States)

The guide provides instructions for using the Solvent Alternatives Guide (SAGE) for Macintosh, version 1.0. The guide assumes that the user is familiar with the fundamentals of operating aMacintosh personal computer under the System 7.0 (or higher) operating system. SAGE for ...

Usability Testing, User-Centered Design, and LibGuides Subject Guides: A Case Study

Science.gov (United States)

Sonsteby, Alec; DeJonghe, Jennifer

2013-01-01

Usability testing has become a routine way for many libraries to ensure that their Web presence is user-friendly and accessible. At the same time, popular subject guide creation systems, such as LibGuides, decentralize Web content creation and put authorship into the hands of librarians who may not be trained in user-centered design principles. At…

SAGE FOR WINDOWS (WSAGE) VERSION 1.0 SOLVENT ALTERNATIVES GUIDE - USER'S GUIDE

Science.gov (United States)

The guide provides instructions for using the Solvent Alternatives Guide (SAGE) for Windows, version 1.0. The guide assumes that the user is familiar with the fundamentals of operating Windows 3.1 (or higher) on a personal computer under the DOS 5.0 (or higher) operating system. ...

User's Guide for RESRAD-OFFSITE

International Nuclear Information System (INIS)

Gnanapragasam, E.; Yu, C.

2015-01-01

The RESRAD-OFFSITE code can be used to model the radiological dose or risk to an offsite receptor. This User's Guide for RESRAD-OFFSITE Version 3.1 is an update of the User's Guide for RESRAD-OFFSITE Version 2 contained in the Appendix A of the User's Manual for RESRAD-OFFSITE Version 2 (ANL/EVS/TM/07-1, DOE/HS-0005, NUREG/CR-6937). This user's guide presents the basic information necessary to use Version 3.1 of the code. It also points to the help file and other documents that provide more detailed information about the inputs, the input forms and features/tools in the code; two of the features (overriding the source term and computing area factors) are discussed in the appendices to this guide. Section 2 describes how to download and install the code and then verify the installation of the code. Section 3 shows ways to navigate through the input screens to simulate various exposure scenarios and to view the results in graphics and text reports. Section 4 has screen shots of each input form in the code and provides basic information about each parameter to increase the user's understanding of the code. Section 5 outlines the contents of all the text reports and the graphical output. It also describes the commands in the two output viewers. Section 6 deals with the probabilistic and sensitivity analysis tools available in the code. Section 7 details the various ways of obtaining help in the code.

Raspberry Pi user guide

CERN Document Server

Upton, Eben

2013-01-01

The essential guide to getting started with the Raspberry Pi ® The Raspberry Pi has been a success beyond the dream of its creators. Their goal, to encourage a new generation of computer programmers who understand how computers work, is well under way. Raspberry Pi User Guide 2e is the newest edition of the runaway bestseller written by the Pi's co-creator, Eben Upton, and tech writer Gareth Halfacree. It contains everything you need to know to get the Pi up and running, including how to: Connect a keyboard, mouse, monitor and other peripheralsInstall software and configure your Raspberry

DarcyTools, Version 2.1. User's guide

International Nuclear Information System (INIS)

Svensson, Urban; Ferry, Michel

2004-03-01

DarcyTools is a computer code for simulation of flow and transport in porous and/or fractured media. The fractured media in mind is a fractured rock and the porous media the soil cover on the top of the rock; it is hence groundwater flows, which is the class of flows in mind.The User's Guide for DarcyTools V2.1 is intended to assist new users of DarcyTools. The Guide is far from complete and it has not been the ambition to write a manual that answers all questions a user may have. The objectives of the Guide can be stated as follows: - Give an overview of the code structure and how DarcyTools is used. - Get familiar with the 'Compact Input File', which is the main way to specify input data. - Get familiar with the 'Fortran Input File', which is the more advanced way to specify input data

Raspberry Pi user guide

CERN Document Server

Halfacree, Gareth

2012-01-01

Make the most out of the world’s first truly compact computer It's the size of a credit card, it can be charged like a smartphone, it runs on open-source Linux, and it holds the promise of bringing programming and playing to millions at low cost. And now you can learn how to use this amazing computer from its co-creator, Eben Upton, in Raspberry Pi User Guide. Cowritten with Gareth Halfacree, this guide gets you up and running on Raspberry Pi, whether you're an educator, hacker, hobbyist, or kid. Learn how to connect your Pi to other hardware, install software, write basic programs, an

Wilmar Planning Tool, user guide

Energy Technology Data Exchange (ETDEWEB)

Larsen, Helge V.

2006-01-15

This is a short user guide to the Wilmar Planning Tool developed in the project Wind Power Integration in Liberalised Electricity Markets (WILMAR) supported by EU (Contract No. ENK5-CT-2002-00663). A User Shell implemented in an Excel workbook controls the Wilmar Planning Tool. All data are contained in Access databases that communicate with various sub-models through text files that are exported from or imported to the databases. In the User Shell various scenario variables and control parameters are set, and export of model data from the input database, activation of the models, as well as import of model results to the output database are triggered from the shell. (au)

Wilmar Planning Tool, user guide

International Nuclear Information System (INIS)

Larsen, Helge V.

2006-01-01

This is a short user guide to the Wilmar Planning Tool developed in the project Wind Power Integration in Liberalised Electricity Markets (WILMAR) supported by EU (Contract No. ENK5-CT-2002-00663). A User Shell implemented in an Excel workbook controls the Wilmar Planning Tool. All data are contained in Access databases that communicate with various sub-models through text files that are exported from or imported to the databases. In the User Shell various scenario variables and control parameters are set, and export of model data from the input database, activation of the models, as well as import of model results to the output database are triggered from the shell. (au)

HyRAM V1.0 User Guide

Energy Technology Data Exchange (ETDEWEB)

Groth, Katrina M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Zumwalt, Hannah Ruth [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Clark, Andrew Jordan [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2016-03-01

Hydrogen Risk Assessment Models (HyRAM) is a prototype software toolkit that integrates data and methods relevant to assessing the safety of hydrogen fueling and storage infrastructure. The HyRAM toolkit integrates deterministic and probabilistic models for quantifying accident scenarios, predicting physical effects, and characterizing the impact of hydrogen hazards, including thermal effects from jet fires and thermal pressure effects from deflagration. HyRAM version 1.0 incorporates generic probabilities for equipment failures for nine types of components, and probabilistic models for the impact of heat flux on humans and structures, with computationally and experimentally validated models of various aspects of gaseous hydrogen release and flame physics. This document provides an example of how to use HyRAM to conduct analysis of a fueling facility. This document will guide users through the software and how to enter and edit certain inputs that are specific to the user-defined facility. Description of the methodology and models contained in HyRAM is provided in [1]. This User’s Guide is intended to capture the main features of HyRAM version 1.0 (any HyRAM version numbered as 1.0.X.XXX). This user guide was created with HyRAM 1.0.1.798. Due to ongoing software development activities, newer versions of HyRAM may have differences from this guide.

COLETTE users' guide

International Nuclear Information System (INIS)

Heenan, R.W.; King, S.M.; Osborn, R.; Stanley, H.B.

1989-12-01

This guide describes the computer program COLETTE. It has been purposely designed to reduce the small-angle data collected on the ISIS small-angle neutron camera LOQ in an interactive and user-friendly manner. This not only gives the LOQ user an opportunity to inspect data rapidly and comprehensively during the course of an experiment but also provides the instrument scientists with a flexible diagnostic tool with which they can monitor the performance of the instrument. After the experiment is completed, COLETTE may be used to provide the final I(Q) versus Q following subtraction of a sample background run and normalisation to a scattering standard. By limiting the range of azimuthal angles included in the analysis the program may take sections through an anisotropic scattering pattern from an ordered system. A completely two dimensional I(Q x ,Q y ) map may also be generated. (author)

LAPACK users` guide: Release 1.0

Energy Technology Data Exchange (ETDEWEB)

Anderson, E.; Bai, Z.; Bischof, C.; Demmel, J.; Dongarra, J.; Du Croz, J.; Greenbaum, A.; Hammarling, S.; McKenney, A.; Ostrouchov, S.; Sorensen, D.

1992-01-31

LAPACK is a transportable library of Fortran 77 subroutines for solving the most common problems in numerical linear algebra: systems of linear equations, linear least squares problems, eigenvalue problems and singular value problems. LAPACK is designed to supersede LINPACK and EISPACK, principally by restructuring the software to achieve much greater efficiency on vector processors, high-performance ``superscalar`` workstations, and shared-memory multi-processors. LAPACK also adds extra functionality, uses some new or improved algorithms, and integrates the two sets of algorithms into a unified package. The LAPACK Users` Guide gives an informal introduction to the design of the algorithms and software, summarizes the contents of the package, describes conventions used in the software and documentation, and includes complete specifications for calling the routines. This edition of the Users` guide describes Release 1.0 of LAPACK.

Zeiss ΣIGMA VP-FE-SEM User Guide

Science.gov (United States)

User guide for analyzing carbon based nanomaterials on a Zeiss Sigma microscope. The guide includes helpful steps for sample preparation and loading. Specific topics utilizing the scanning electron microscope are instrumentation startup and imagining. A variety of detectors in...

TRENDS: A flight test relational database user's guide and reference manual

Science.gov (United States)

Bondi, M. J.; Bjorkman, W. S.; Cross, J. L.

1994-01-01

This report is designed to be a user's guide and reference manual for users intending to access rotocraft test data via TRENDS, the relational database system which was developed as a tool for the aeronautical engineer with no programming background. This report has been written to assist novice and experienced TRENDS users. TRENDS is a complete system for retrieving, searching, and analyzing both numerical and narrative data, and for displaying time history and statistical data in graphical and numerical formats. This manual provides a 'guided tour' and a 'user's guide' for the new and intermediate-skilled users. Examples for the use of each menu item within TRENDS is provided in the Menu Reference section of the manual, including full coverage for TIMEHIST, one of the key tools. This manual is written around the XV-15 Tilt Rotor database, but does include an appendix on the UH-60 Blackhawk database. This user's guide and reference manual establishes a referrable source for the research community and augments NASA TM-101025, TRENDS: The Aeronautical Post-Test, Database Management System, Jan. 1990, written by the same authors.

NCEP BUFRLIB Software User Guide

Science.gov (United States)

Integration Branch > Decoders > BUFRLIB BUFRLIB Software User Guide This document set describes how to use the NCEP BUFRLIB software to encode or decode BUFR messages. It is not intended to be a primer on background knowledge of the basic concepts of BUFR and will focus solely on how to use the BUFRLIB software

The ARL 2030 Scenarios: A User's Guide for Research Libraries

Science.gov (United States)

Association of Research Libraries, 2010

2010-01-01

This user's guide was developed to advance local planning at ARL member libraries. It is written for library leaders writ large and for anyone leading or contributing to research library planning processes. Users do not need advanced facilitation skills to benefit from this guide, but facilitators charged with supporting scenario planning will…

SharePoint User's Guide

CERN Document Server

Corporation, Infusion Development

2009-01-01

This straightforward guide shows SharePoint users how to create and use web sites for sharing and collaboration. Learn to use the document and picture libraries for adding and editing content, add discussion boards and surveys, receive alerts when documents and information have been added or changed, and enhance security. Designed to help you find answers quickly, the book shows how to make the most of SharePoint for productivity and collaboration.

PARFUME User's Guide

International Nuclear Information System (INIS)

Hamman, Kurt

2010-01-01

PARFUME, a fuel performance analysis and modeling code, is being developed at the Idaho National Laboratory for evaluating gas reactor coated particle fuel assemblies for prismatic, pebble bed, and plate type fuel geometries. The code is an integrated mechanistic analysis tool that evaluates the thermal, mechanical, and physico-chemical behavior of coated fuel particles (TRISO) and the probability for fuel failure given the particle-to-particle statistical variations in physical dimensions and material properties that arise during the fuel fabrication process. Using a robust finite difference numerical scheme, PARFUME is capable of performing steady state and transient heat transfer and fission product diffusion analyses for the fuel. Written in FORTRAN 90, PARFUME is easy to read, maintain, and modify. Currently, PARFUME is supported only on MS Windows platforms. This document represents the initial version of the PARFUME User Guide, a supplement to the PARFUME Theory and Model Basis Report which describes the theoretical aspects of the code. User information is provided including: (1) code development, (2) capabilities and limitations, (3) installation and execution, (4) user input and output, (5) sample problems, and (6) error messages. In the near future, the INL plans to release a fully benchmarked and validated beta version of PARFUME.

National Center for Electron Microscopy users' guide

International Nuclear Information System (INIS)

1987-01-01

The National Center for Electron Microscopy (NCEM) in the Materials and Molecular Research Division of the Lawrence Berkeley Laboratory is a high voltage electron microscope facility for ultra-high resolution or dynamic in-situ studies. This guide describes the instruments and their specifications, support instrumentation, and user policies. Advice as to travel and accommodations is provided in the guide. (FI)

SPORTS (version 1) user's guide

International Nuclear Information System (INIS)

Chatoorgoon, V.; Thibeault, P.R.

1985-06-01

SPORTS is a transient one-dimensional thermalhydraulic code formulated from the non-linear time dependent conservation equations and designed to investigate two-phase flow stability. The SPORTS Users' Guide contains some features of the code, a brief description of the program environment and access, and a description of the input data complete with a sample problem

Miro V4.0: user's guide; Miro V4.0: guide utilisateur

Energy Technology Data Exchange (ETDEWEB)

Morice, O.; Ribeyre, X. [CEA/CESTA, Dept. des Lasers de Puissance, DLP, 33 - Le Barp (France); Donnat, Ph.; Porcher, Th.; Treimany, C. [CEA/CESTA, DCSA/MLS, 33 - Le Barp (France); Nassiet, D.; Gallice, G. [CEA/CESTA, DEV/SIS, 33 - Le Barp (France); Rivoire, V.; L' hullier, N. [CISI, 33 (France)

2000-07-01

This paper contains the user's guide of Miro software. This software is used for simulating propagation and amplification of laser beams in laser devices as Megajoule or NIF. The physical effects taken into account are essentially: saturated amplification, absorption, Kerr effect, frequency conversion, birefringence and aberrations. The models of propagation are either geometrical optics of parallel beams, or Fresnel diffraction and broadband pulse propagation. A graphic user interface has been included to allow interactive management of optical devices and results. A Unix environment with X-Window and Motif or a Windows 95, Windows 98 or Windows NT environment is required to run Miro. The User's guide gives a short insight of the software. (authors)

NODC Standard Format Marine Mammals of Coastal Alaska Data (1975-1981): Marine Mammal Specimens (F025) (NODC Accession 0014150)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC maintains data in three NODC Standard Format Marine Mammal Data Sets: Marine Mammal Sighting and Census (F127); Marine Mammal Specimens (F025); Marine Mammal...

NODC Standard Format Marine Mammals of Coastal Alaska Data (1979-1991): Sighting and Census (F127) (NODC Accession 0014197)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC maintains data in three NODC Standard Format Marine Mammal Data Sets: Marine Mammal Sighting and Census (F127); Marine Mammal Specimens (F025); Marine Mammal...

Adagio 4.14 users guide.

Energy Technology Data Exchange (ETDEWEB)

Spencer, Benjamin Whiting

2009-10-01

This document is a user's guide for the code Adagio. Adagio is a three-dimensional, implicit solid mechanics code with a versatile element library, nonlinear material models, and capabilities for modeling large deformation and contact. Adagio is a parallel code, and its nonlinear solver and contact capabilities enable scalable solutions of large problems. It is built on the SIERRA Framework [1, 2]. SIERRA provides a data management framework in a parallel computing environment that allows the addition of capabilities in a modular fashion. The Adagio 4.14 User's Guide provides information about the functionality in Adagio and the command structure required to access this functionality in a user input file. This document is divided into chapters based primarily on functionality. For example, the command structure related to the use of various element types is grouped in one chapter; descriptions of material models are grouped in another chapter. The input and usage of Adagio is similar to that of the code Presto [3]. Presto, like Adagio, is a solid mechanics code built on the SIERRA Framework. The primary difference between the two codes is that Presto uses explicit time integration for transient dynamics analysis, whereas Adagio is an implicit code. Because of the similarities in input and usage between Adagio and Presto, the user's guides for the two codes are structured in the same manner and share common material. (Once you have mastered the input structure for one code, it will be easy to master the syntax structure for the other code.) To maintain the commonality between the two user's guides, we have used a variety of techniques. For example, references to Presto may be found in the Adagio user's guide and vice versa, and the chapter order across the two guides is the same. On the other hand, each of the two user's guides is expressly tailored to the features of the specific code and documents the particular functionality for that

Operational Based Vision Assessment Automated Vision Test Collection User Guide

Science.gov (United States)

2017-05-15

AFRL-SA-WP-SR-2017-0012 Operational Based Vision Assessment Automated Vision Test Collection User Guide Elizabeth Shoda, Alex...June 2015 – May 2017 4. TITLE AND SUBTITLE Operational Based Vision Assessment Automated Vision Test Collection User Guide 5a. CONTRACT NUMBER... automated vision tests , or AVT. Development of the AVT was required to support threshold-level vision testing capability needed to investigate the

Understanding your users a practical guide to user requirements methods, tools, and techniques

CERN Document Server

Baxter, Kathy

2005-01-01

Today many companies are employing a user-centered design (UCD) process, but for most companies, usability begins and ends with the usability test. Although usability testing is a critical part of an effective user-centered life cycle, it is only one component of the UCD process. This book is focused on the requirements gathering stage, which often receives less attention than usability testing, but is equally as important. Understanding user requirements is critical to the development of a successful product. Understanding Your Users is an easy to read, easy to implement, how-to guide on

DarcyTools, Version 2.1. User's guide

Energy Technology Data Exchange (ETDEWEB)

Svensson, Urban [Computer-aided Fluid Engineering AB, Norrkoeping (Sweden); Ferry, Michel [MFRDC, Orvault (France)

2004-03-01

DarcyTools is a computer code for simulation of flow and transport in porous and/or fractured media. The fractured media in mind is a fractured rock and the porous media the soil cover on the top of the rock; it is hence groundwater flows, which is the class of flows in mind.The User's Guide for DarcyTools V2.1 is intended to assist new users of DarcyTools. The Guide is far from complete and it has not been the ambition to write a manual that answers all questions a user may have. The objectives of the Guide can be stated as follows: - Give an overview of the code structure and how DarcyTools is used. - Get familiar with the 'Compact Input File', which is the main way to specify input data. - Get familiar with the 'Fortran Input File', which is the more advanced way to specify input data.

METEOR v1.0 - User's Guide

International Nuclear Information System (INIS)

Palomo, E.

1994-01-01

This script is a User's Guide for the software package METEOR for statistical analysis of meteorological data series. The original version of METEOR have been developed by Ph.D. Elena Palomo, CIEMAT-IER, GIMASE. It is built by linking programs and routines written in FORTRAN 77 and it adds the graphical capabilities of GNUPLOT. The shape of this toolbox was designed following the criteria of modularity, flexibility and agility criteria. All the input, output and analysis options are structured in three main menus: i) the first is aimed to evaluate the quality of the data set; ii) the second is aimed for pre-processing of the data; and iii) the third is aimed towards the statistical analyses and for creating the graphical outputs. Actually the information about METEOR is constituted by three documents written in spanish: 1) METEOR v1.0: User's guide; 2) METEOR v1.0: A usage example; 3) METEOR v1.0: Design and structure of the software package. (Author)

Miro V3.0: user guide and reference manual

International Nuclear Information System (INIS)

Donnat, Ph.; Treimany, C.; Morice, O.; Ribeyre, X.

1998-06-01

This paper contains the user's guide and reference manual of Miro software. This software is used for simulating propagation and amplification of laser beams in laser devices as Megajoules or NIF. The physical effects taken into account ar essentially: saturated amplification, absorption, Kerr effect, birefringence and aberrations. The models of propagation are either geometrical optics of parallel beams, or Fresnel diffraction. A graphic user interface as been included to allow interactive management of optical devices and results. A Unix environment with X-Window and Motif is required to run Miro. The user's guide gives a short insight of the software. The reference manual details the physical models and the way they are implanted in Miro. (author)

NODC Standard Format Marine Mammals of Coastal Alaska Data (1975-1976): Marine Mammal Sighting 2 (F026) (NODC Accession 0014151)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC maintains data in three NODC Standard Format Marine Mammal Data Sets: Marine Mammal Sighting and Census (F127); Marine Mammal Specimens (F025); Marine Mammal...

User's guide to the biosphere code BIOMOD

International Nuclear Information System (INIS)

Kane, P.

1983-05-01

BIOMOD has been designed to interface with SYVAC, the function of which is to perform generic risk assessments on hypothetical repository-geosphere-biosphere combinations. The user's guide contains the detailed specifications for the models used, a description of the interim user-interface, a specification for required input and definition of output. Sources of error are indicated and reference is made to the database description and other documents issued relating to BIOMOD. (author)

User-guided segmentation for volumetric retinal optical coherence tomography images

Science.gov (United States)

Yin, Xin; Chao, Jennifer R.; Wang, Ruikang K.

2014-01-01

Abstract. Despite the existence of automatic segmentation techniques, trained graders still rely on manual segmentation to provide retinal layers and features from clinical optical coherence tomography (OCT) images for accurate measurements. To bridge the gap between this time-consuming need of manual segmentation and currently available automatic segmentation techniques, this paper proposes a user-guided segmentation method to perform the segmentation of retinal layers and features in OCT images. With this method, by interactively navigating three-dimensional (3-D) OCT images, the user first manually defines user-defined (or sketched) lines at regions where the retinal layers appear very irregular for which the automatic segmentation method often fails to provide satisfactory results. The algorithm is then guided by these sketched lines to trace the entire 3-D retinal layer and anatomical features by the use of novel layer and edge detectors that are based on robust likelihood estimation. The layer and edge boundaries are finally obtained to achieve segmentation. Segmentation of retinal layers in mouse and human OCT images demonstrates the reliability and efficiency of the proposed user-guided segmentation method. PMID:25147962

LAPACK users' guide: Release 1. 0

Energy Technology Data Exchange (ETDEWEB)

Anderson, E.; Bai, Z.; Bischof, C.; Demmel, J.; Dongarra, J.; Du Croz, J.; Greenbaum, A.; Hammarling, S.; McKenney, A.; Ostrouchov, S.; Sorensen, D.

1992-01-31

LAPACK is a transportable library of Fortran 77 subroutines for solving the most common problems in numerical linear algebra: systems of linear equations, linear least squares problems, eigenvalue problems and singular value problems. LAPACK is designed to supersede LINPACK and EISPACK, principally by restructuring the software to achieve much greater efficiency on vector processors, high-performance superscalar'' workstations, and shared-memory multi-processors. LAPACK also adds extra functionality, uses some new or improved algorithms, and integrates the two sets of algorithms into a unified package. The LAPACK Users' Guide gives an informal introduction to the design of the algorithms and software, summarizes the contents of the package, describes conventions used in the software and documentation, and includes complete specifications for calling the routines. This edition of the Users' guide describes Release 1.0 of LAPACK.

Users guide to REGIONAL-1: a regional assessment model

International Nuclear Information System (INIS)

Davis, W.E.; Eadie, W.J.; Powell, D.C.

1979-09-01

A guide was prepared to allow a user to run the PNL long-range transport model, REGIONAL 1. REGIONAL 1 is a computer model set up to run atmospheric assessments on a regional basis. The model has the capability of being run in three modes for a single time period. The three modes are: (1) no deposition, (2) dry deposition, (3) wet and dry deposition. The guide provides the physical and mathematical basis used in the model for calculating transport, diffusion, and deposition for all three modes. Also the guide includes a program listing with an explanation of the listings and an example in the form of a short-term assessment for 48 hours. The purpose of the example is to allow a person who has past experience with programming and meteorology to operate the assessment model and compare his results with the guide results. This comparison will assure the user that the program is operating in a proper fashion

Airport Information Retrieval System (AIRS) User's Guide

Science.gov (United States)

1973-08-01

The handbook is a user's guide for a prototype air traffic flow control automation system developed for the FAA's System Command Center. The system is implemented on a time-sharing computer and is designed to provide airport traffic load predictions ...

A user's guide for the program NAMMU

International Nuclear Information System (INIS)

Rae, J.; Robinson, P.C.; Wickens, L.M.

1981-06-01

The computer program NAMMU was written to model heat and groundwater flow problems arising from underground disposal of high-level radioactive waste. At present the program handles two-dimensional time-dependent flow in permeable rock. A general description of NAMMU and the first attempts at validating the code have already been published. Since then it has begun to be applied to flows in real geological regions and it is clear that some form of user's guide has become necessary. The program will certainly undergo further extensions and modifications so this guide will not necessarily cover all aspects of later versions. The code for NAMMU is built on a very general and flexible library of finite-element subprograms written at Harwell over several years. This flexibility, and the fact that many transport problems can be expressed in substantially the same mathematical form has led already to close relatives of NAMMU being written for other transport problems. A recent example is the program MISCFLO which computes solute transport in a form appropriate to miscible displacement flow in oil reservoirs. The NAMMU user's guide applies equally to such close relatives. (author)

Six-Degree-of-Freedom Dynamic Test System (SDTS) User Test Planning Guide

Science.gov (United States)

Stokes, LeBarian

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the SDTS. The User Test Planning Guide aids in establishing expectations for both NASA and non- NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Assessment of Dog Guides by Users in Japan and Suggestions for Improvement

Science.gov (United States)

Koda, Naoko; Kubo, Masumi; Ishigami, Tomomi; Furuhashi, Hiroaki

2011-01-01

Dog guide users in Japan were mostly satisfied with and used their dogs frequently; however, they requested some improvements in training and in basic guiding work. The findings of the study suggest the need for further improvement of training methods, considering cultural factors and individual users' needs. (Contains 3 tables.)

AMEM-ADL Polymer Migration Estimation Model User's Guide

Science.gov (United States)

The user's guide of the Arthur D. Little Polymer Migration Estimation Model (AMEM) provides the information on how the model estimates the fraction of a chemical additive that diffuses through polymeric matrices.

Presto 4.14 users guide.

Energy Technology Data Exchange (ETDEWEB)

Spencer, Benjamin Whiting

2009-10-01

Presto is a three-dimensional transient dynamics code with a versatile element library, nonlinear material models, large deformation capabilities, and contact. It is built on the SIERRA Framework [1, 2]. SIERRA provides a data management framework in a parallel computing environment that allows the addition of capabilities in a modular fashion. Contact capabilities are parallel and scalable. The Presto 4.14 User's Guide provides information about the functionality in Presto and the command structure required to access this functionality in a user input file. This document is divided into chapters based primarily on functionality. For example, the command structure related to the use of various element types is grouped in one chapter; descriptions of material models are grouped in another chapter. The input and usage of Presto is similar to that of the code Adagio [3]. Adagio is a three-dimensional quasi-static code with a versatile element library, nonlinear material models, large deformation capabilities, and contact. Adagio, like Presto, is built on the SIERRA Framework [1]. Contact capabilities for Adagio are also parallel and scalable. A significant feature of Adagio is that it offers a multilevel, nonlinear iterative solver. Because of the similarities in input and usage between Presto and Adagio, the user's guides for the two codes are structured in the same manner and share common material. (Once you have mastered the input structure for one code, it will be easy to master the syntax structure for the other code.) To maintain the commonality between the two user's guides, we have used a variety of techniques. For example, references to Adagio may be found in the Presto user's guide and vice versa, and the chapter order across the two guides is the same. On the other hand, each of the two user's guides is expressly tailored to the features of the specific code and documents the particular functionality for that code. For example

Presto 4.16 users guide.

Energy Technology Data Exchange (ETDEWEB)

2010-05-01

Presto is a three-dimensional transient dynamics code with a versatile element library, nonlinear material models, large deformation capabilities, and contact. It is built on the SIERRA Framework [1, 2]. SIERRA provides a data management framework in a parallel computing environment that allows the addition of capabilities in a modular fashion. Contact capabilities are parallel and scalable. The Presto 4.16 User's Guide provides information about the functionality in Presto and the command structure required to access this functionality in a user input file. This document is divided into chapters based primarily on functionality. For example, the command structure related to the use of various element types is grouped in one chapter; descriptions of material models are grouped in another chapter. The input and usage of Presto is similar to that of the code Adagio [3]. Adagio is a three-dimensional quasi-static code with a versatile element library, nonlinear material models, large deformation capabilities, and contact. Adagio, like Presto, is built on the SIERRA Framework [1]. Contact capabilities for Adagio are also parallel and scalable. A significant feature of Adagio is that it offers a multilevel, nonlinear iterative solver. Because of the similarities in input and usage between Presto and Adagio, the user's guides for the two codes are structured in the same manner and share common material. (Once you have mastered the input structure for one code, it will be easy to master the syntax structure for the other code.) To maintain the commonality between the two user's guides, we have used a variety of techniques. For example, references to Adagio may be found in the Presto user's guide and vice versa, and the chapter order across the two guides is the same. On the other hand, each of the two user's guides is expressly tailored to the features of the specific code and documents the particular functionality for that code. For example

Adagio 4.16 users guide.

Energy Technology Data Exchange (ETDEWEB)

2010-05-01

Adagio is a three-dimensional, implicit solid mechanics code with a versatile element library, nonlinear material models, and capabilities for modeling large deformation and contact. Adagio is a parallel code, and its nonlinear solver and contact capabilities enable scalable solutions of large problems. It is built on the SIERRA Framework [1, 2]. SIERRA provides a data management framework in a parallel computing environment that allows the addition of capabilities in a modular fashion. The Adagio 4.16 User's Guide provides information about the functionality in Adagio and the command structure required to access this functionality in a user input file. This document is divided into chapters based primarily on functionality. For example, the command structure related to the use of various element types is grouped in one chapter; descriptions of material models are grouped in another chapter. The input and usage of Adagio is similar to that of the code Presto [3]. Presto, like Adagio, is a solid mechanics code built on the SIERRA Framework. The primary difference between the two codes is that Presto uses explicit time integration for transient dynamics analysis, whereas Adagio is an implicit code. Because of the similarities in input and usage between Adagio and Presto, the user's guides for the two codes are structured in the same manner and share common material. (Once you have mastered the input structure for one code, it will be easy to master the syntax structure for the other code.) To maintain the commonality between the two user's guides, we have used a variety of techniques. For example, references to Presto may be found in the Adagio user's guide and vice versa, and the chapter order across the two guides is the same. On the other hand, each of the two user's guides is expressly tailored to the features of the specific code and documents the particular functionality for that code. For example, though both Presto and Adagio have

Energy Systems Test Area (ESTA) Battery Test Operations User Test Planning Guide

Science.gov (United States)

Salinas, Michael

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the ESTA Battery Test Operations. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

RadCat 2.0 User Guide.

Energy Technology Data Exchange (ETDEWEB)

Osborn, Douglas.; Weiner, Ruth F.; Mills, George Scott; Hamp, Steve C.; O' Donnell, Brandon, M.; Orcutt, David J.; Heames, Terence J.; Hinojosa, Daniel

2005-01-01

This document provides a detailed discussion and a guide for the use of the RadCat 2.0 Graphical User Interface input file generator for the RADTRAN 5.5 code. The differences between RadCat 2.0 and RadCat 1.0 can be attributed to the differences between RADTRAN 5 and RADTRAN 5.5 as well as clarification for some of the input parameters. 3

NODC Standard Product: Experimental Compact Disk NODC-01 Pacific Ocean Temperature-Salinity Profiles (1900-1988) (NODC Accession 0086259)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The National Oceanographic Data Center (NODC) created a compact disk containing over 1.3 million temperature-depth and salinity-depth profiles taken in the Pacific...

Miro V3.0: user guide and reference manual; Miro V3.0: guide utilisateur et manuel de reference

Energy Technology Data Exchange (ETDEWEB)

Donnat, Ph; Treimany, C; Morice, O; Ribeyre, X

1998-06-01

This paper contains the user`s guide and reference manual of Miro software. This software is used for simulating propagation and amplification of laser beams in laser devices as Megajoules or NIF. The physical effects taken into account ar essentially: saturated amplification, absorption, Kerr effect, birefringence and aberrations. The models of propagation are either geometrical optics of parallel beams, or Fresnel diffraction. A graphic user interface as been included to allow interactive management of optical devices and results. A Unix environment with X-Window and Motif is required to run Miro. The user`s guide gives a short insight of the software. The reference manual details the physical models and the way they are implanted in Miro. (author) 33 refs.

Turbsim User's Guide: Version 1.50

Energy Technology Data Exchange (ETDEWEB)

Jonkman, B. J.

2009-09-01

This report is a user's guide for the TurbSim code. TurbSim stochastic inflow turbulence code is a wind turbine design code that simulates a full-field flow containing coherent turbulence associated with nocturnal boundary layer flows.

Waste treatability guidance program. User`s guide. Revision 0

Energy Technology Data Exchange (ETDEWEB)

Toth, C.

1995-12-21

DOE sites across the country generate and manage radioactive, hazardous, mixed, and sanitary wastes. It is necessary for each site to find the technologies and associated capacities required to manage its waste. One role of DOE HQ Office of Environmental Restoration and Waste Management is to facilitate the integration of the site- specific plans into coherent national plans. DOE has developed a standard methodology for defining and categorizing waste streams into treatability groups based on characteristic parameters that influence waste management technology needs. This Waste Treatability Guidance Program automates the Guidance Document for the categorization of waste information into treatability groups; this application provides a consistent implementation of the methodology across the National TRU Program. This User`s Guide provides instructions on how to use the program, including installations instructions and program operation. This document satisfies the requirements of the Software Quality Assurance Plan.

TBCODE (release 2.1) user guide

International Nuclear Information System (INIS)

Morris, S.

1998-01-01

This report is the User Guide for the Turning Bands program 'TBCODE' for generating realizations of normally-distributed correlated multidimensional random fields. The report describes the capabilities of the program, and explains how to install and run the program on a UNIX workstation. The input required from the user is explained in detail, together with the format of the output files produced by the program. An illustrative example is given, including a complete listing of all input and output files used. The quality system under which the software has been developed is described. The report also includes a specification of the subroutines SIM2D and SIM3D used to generate the random fields. These subroutines may be used separately from TBCODE. (author)

MicroPRIS user's guide

International Nuclear Information System (INIS)

1991-01-01

MicroPRIS is a new service of the IAEA Power Reactor Information System (PRIS) for the Member States of IAEA. MicroPRIS makes the IAEA database on nuclear power plants and their operating experience available to Member States on computer diskettes in a form readily accessible by standard commercially available personal computer packages. The aim of this publication is to provide the users of the PC version of PRIS data with description of the subset of the full PRIS database contained in MicroPRIS (release 1990), description of files and file structures, field descriptions and definitions, extraction and selection guide and with the method of calculation of a number of important performance indicators used by the IAEA

NODC Standard Product: Oceanographic station profile time series (NODC Accession 0095191)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The National Oceanographic Data Center and the World Data Center-A for Oceanography compiled from the NODC Oceanographic Station Data File a set of oceanographic...

User's and reference guide to the INEL RML/analytical radiochemistry sample tracking database version 1.00

International Nuclear Information System (INIS)

Femec, D.A.

1995-09-01

This report discusses the sample tracking database in use at the Idaho National Engineering Laboratory (INEL) by the Radiation Measurements Laboratory (RML) and Analytical Radiochemistry. The database was designed in-house to meet the specific needs of the RML and Analytical Radiochemistry. The report consists of two parts, a user's guide and a reference guide. The user's guide presents some of the fundamentals needed by anyone who will be using the database via its user interface. The reference guide describes the design of both the database and the user interface. Briefly mentioned in the reference guide are the code-generating tools, CREATE-SCHEMA and BUILD-SCREEN, written to automatically generate code for the database and its user interface. The appendices contain the input files used by the these tools to create code for the sample tracking database. The output files generated by these tools are also included in the appendices

SALOME. Software for the analysis of lines or multiplets from Extrap. User's guide

International Nuclear Information System (INIS)

Zastrow, K.D.

1994-01-01

This user's guide describes the centre piece of spectral analysis programs for Extrap-T1. The method for spectral analysis is presented theoretically. It also presents the actual use of the program PROBESCHUSS and how to work on the multiplet library. The present user's guide is about PROBESCHUSS 2.1 and MULTIFIT 2.0. 7 figs, 5 appendices

SILMUSCEN and CLIGEN User's Guide

International Nuclear Information System (INIS)

Carter, T.; Tuomenvirta, H.; Posch, M.

1995-01-01

This User's Guide has been prepared to provide recommendations for the selection and application of climatic scenarios in the Finnish Research Programme on Climate Change (SILMU). These scenarios are required for conducting impact studies in SILMU. They should reflect the current range of estimates of future climate in the Finnish region. In addition, they should be consistent with other projections of importance in impact studies, such as future atmospheric composition and sea level. Section 2 provides some background information about the types of scenarios required in SILMU and Section 3 offers a general description of the scenarios. In Section 4 there is some advice on applying sensitivity studies to complement the use of scenarios. Section 5 explains the installation of the SILMUSCEN program and Section 6 guides the user through some examples to illustrate how SILMUSCEN can be used. Section 7 offers some recommendations on which scenarios to adopt for different impact assessments. In order to ensure some compatibility between impact studies in SILMU, it is very important that the recommendations in this section are followed as far as possible. Section 8 addresses important omissions from the computer program and suggests procedures to adopt in their absence. Section 9 explores alternative methods of specifying the baseline climate, and shows how scenario adjustments to the baseline can be made. in Section 10, the stochastic weather generator, CLIGEN, is described and its use illustrated by means of examples. Finally, possible refinements of the programs are outlined in Section 11, along with contact names and addresses for obtaining further information. (36 refs.)

WorkZoneQ user guide for two-lane freeway work zones.

Science.gov (United States)

2013-06-01

WorkZoneQ was developed in Visual Basic for Applications (VBA) to implement the results of the previous study, : Queue and Users Costs in Highway Work Zones. This report contains the WorkZoneQ user guide. WorkZoneQ : consists of eight Excel ...

Users guide to the inelastic rotor spectrometer (IRS)

International Nuclear Information System (INIS)

Bunce, L.J.

1987-11-01

The paper is a users guide to the inelastic rotor spectrometer installed on the Harwell 136 Mev electron linear accelerator HELIOS. The spectrometer is designed to measure neutron inelastic scattering for energy transfers from 50 meV to 400 meV and covering a range of Q values from 1 to 15 A 0-1 . The guide contains a description of:- time-of-flight scales, run and sample changer control units, sample environment, detectors, rotor system, 600 Hz operation of rotor, a run, and data processing. (U.K.)

A User's Guide to CGNS. 1.0

Science.gov (United States)

Rumsey, Christopher L.; Poirier, Diane M. A.; Bush, Robert H.; Towne, Charles E.

2001-01-01

The CFD General Notation System (CGNS) was developed to be a self-descriptive, machine-independent standard for storing CFD aerodynamic data. This guide aids users in the implementation of CGNS. It is intended as a tutorial on the usage of the CGNS mid-level library routines for reading and writing grid and flow solution datasets for both structured and unstructured methodologies.

A User's Guide to the Federal Theater Project.

Science.gov (United States)

Sheridan, Frank; Leslie, Linda

1997-01-01

Presents a lesson plan constructed around materials found in the User's Guide to the Federal Project. The Federal Theater Project produced radical and populist plays during the Great Depression before being de-funded by a conservative Congress. The lessons include activities and discussion built around the original plays. (MJP)

VANDAL user guide. V. 1.1

International Nuclear Information System (INIS)

Unsworth, M.D.

1989-02-01

This document forms Volume 1.1 of the VANDAL User Guide and is intended to provide all the information necessary to define and run a case study. Information is given on the data to be specified, on the structure of the input data files and on how to execute the system. There are three related volumes to this, they are: Volume 1.2 - Input and Execution Appendices; Volume 2.1 - Ouput and Error Messages; and Volume 2.2 - PRA Output Analysis. (author)

The Johnson Space Center management information systems: User's guide to JSCMIS

Science.gov (United States)

Bishop, Peter C.; Erickson, Lloyd

1990-01-01

The Johnson Space Center Management Information System (JSCMIS) is an interface to computer data bases at the NASA Johnson Space Center which allows an authorized user to browse and retrieve information from a variety of sources with minimum effort. The User's Guide to JSCMIS is the supplement to the JSCMIS Research Report which details the objectives, the architecture, and implementation of the interface. It is a tutorial on how to use the interface and a reference for details about it. The guide is structured like an extended JSCMIS session, describing all of the interface features and how to use them. It also contains an appendix with each of the standard FORMATs currently included in the interface. Users may review them to decide which FORMAT most suits their needs.

I and C functional test facility user guide

International Nuclear Information System (INIS)

Kwon, Ki Chun

1996-07-01

The objective of I and C functional test facility (FTF) is to validate newly developed digital control and protection algorithm, alarm reduction algorithm and the function of operator support system and so on. Test facility is divided into three major parts; software, hardware and graphic user interface. Software consists of mathematical modeling which simulates 3 loop pressurizer water reactor, 993 MWe Westinghouse plant and supervisory module which interpret user instructions and data interface program. FTF is implemented in HP747I workstation using FORTRAN77 and ''C'' language under UNIX operating system. This User Guide provides file structure, instructions and program modification method and provides initial data, malfunction list, process variables list and simulation diagram as an appendix to test developed prototype. 12 figs. (Author)

I and C functional test facility user guide

Energy Technology Data Exchange (ETDEWEB)

Kwon, Ki Chun [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1996-07-01

The objective of I and C functional test facility (FTF) is to validate newly developed digital control and protection algorithm, alarm reduction algorithm and the function of operator support system and so on. Test facility is divided into three major parts; software, hardware and graphic user interface. Software consists of mathematical modeling which simulates 3 loop pressurizer water reactor, 993 MWe Westinghouse plant and supervisory module which interpret user instructions and data interface program. FTF is implemented in HP747I workstation using FORTRAN77 and ``C`` language under UNIX operating system. This User Guide provides file structure, instructions and program modification method and provides initial data, malfunction list, process variables list and simulation diagram as an appendix to test developed prototype. 12 figs. (Author).

GEOS-5 Chemistry Transport Model User's Guide

Science.gov (United States)

Kouatchou, J.; Molod, A.; Nielsen, J. E.; Auer, B.; Putman, W.; Clune, T.

2015-01-01

The Goddard Earth Observing System version 5 (GEOS-5) General Circulation Model (GCM) makes use of the Earth System Modeling Framework (ESMF) to enable model configurations with many functions. One of the options of the GEOS-5 GCM is the GEOS-5 Chemistry Transport Model (GEOS-5 CTM), which is an offline simulation of chemistry and constituent transport driven by a specified meteorology and other model output fields. This document describes the basic components of the GEOS-5 CTM, and is a user's guide on to how to obtain and run simulations on the NCCS Discover platform. In addition, we provide information on how to change the model configuration input files to meet users' needs.

User's guide to the 'DISPOSALS' model

International Nuclear Information System (INIS)

Groom, M.S.; James, A.R.; Laundy, R.S.

1984-03-01

This report provides a User's Guide to the 'DISPOSALS' computer model and includes instructions on how to set up and run a specific problem together with details of the scope, theoretical basis, data requirements and capabilities of the model. The function of the 'DISPOSALS' model is to make assignments of nuclear waste material in an optimum manner to a number of disposal sites each subject to a number of constraints such as limits on the volume and activity. The user is able to vary the number of disposal sites, the range and limits of the constraints to be applied to each disposal site and the objective function for optimisation. The model is based on the Linear Programming technique and uses CAP Scientific's LAMPS and MAGIC packages. Currently the model has been implemented on CAP Scientific's VAX 11/750 minicomputer. (author)

Pandora technical description and user guide

Energy Technology Data Exchange (ETDEWEB)

Astrand, P.-G.; Breed, R. [Facilia AB, Bromma (Sweden); Jones, J. [Svensk Karnbranslehantering AB, Stockholm (Finland)

2005-11-15

Pandora is an extension of the well-known technical computing and simulation software MATLAB and Simulink of The Mathworks Inc. Pandora was developed to simplify development of models resulting in large systems of differential equations where decay of radionuclides is included in the model and to enhance the graphical user interface to be more suitable for radioecological modelling. MATLAB is a programming language and a computing environment. It provides core mathematics and advanced graphical tools for data analysis, visualisation, application development etc. Simulink is mainly targeted at modelling and simulating dynamic systems. Simulink provides a block diagram interface for MATLAB. Pandora facilitates effective use of them for radionuclide transport modelling. In the report the technical solutions of Pandora are outlined through a presentation of the key elements and a step-by-step sample case serving also as a user guide. (orig.)

Pandora technical description and user guide

International Nuclear Information System (INIS)

Astrand, P.-G.; Breed, R.; Jones, J.

2005-11-01

Pandora is an extension of the well-known technical computing and simulation software MATLAB and Simulink of The Mathworks Inc. Pandora was developed to simplify development of models resulting in large systems of differential equations where decay of radionuclides is included in the model and to enhance the graphical user interface to be more suitable for radioecological modelling. MATLAB is a programming language and a computing environment. It provides core mathematics and advanced graphical tools for data analysis, visualisation, application development etc. Simulink is mainly targeted at modelling and simulating dynamic systems. Simulink provides a block diagram interface for MATLAB. Pandora facilitates effective use of them for radionuclide transport modelling. In the report the technical solutions of Pandora are outlined through a presentation of the key elements and a step-by-step sample case serving also as a user guide. (orig.)

Energy Systems Test Area (ESTA) Electrical Power Systems Test Operations: User Test Planning Guide

Science.gov (United States)

Salinas, Michael J.

2012-01-01

Test process, milestones and inputs are unknowns to first-time users of the ESTA Electrical Power Systems Test Laboratory. The User Test Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their test engineering personnel in test planning and execution. Material covered includes a roadmap of the test process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, test article interfaces, and inputs necessary to define test scope, cost, and schedule are included as an appendix to the guide.

Computer-Aided Authoring System (AUTHOR) User's Guide. Volume I. Final Report.

Science.gov (United States)

Guitard, Charles R.

This user's guide for AUTHOR, an automatic authoring system which produces programmed texts for teaching symbol recognition, provides detailed instructions to help the user construct and enter the information needed to create the programmed text, run the AUTHOR program, and edit the automatically composed paper. Major sections describe steps in…

Guiding Users to Sea Level Change Data Through Content

Science.gov (United States)

Quach, N.; Abercrombie, S. P.; Boening, C.; Brennan, H. P.; Gill, K. M.; Greguska, F. R., III; Huang, T.; Jackson, R.; Larour, E. Y.; Shaftel, H.; Tenenbaum, L. F.; Zlotnicki, V.; Boeck, A.; Moore, B.; Moore, J.

2017-12-01

The NASA Sea Level Change Portal (https://sealevel.nasa.gov) is an immersive and innovative web portal for sea level change research that addresses the needs of diverse audiences, from scientists across disparate disciplines to the general public to policy makers and businesses. Since sea level change research involves vast amounts of data from multiple fields, it becomes increasingly important to come up with novel and effective ways to guide users to the data they need. News articles published on the portal contains links to relevant data. The Missions section highlights missions and projects as well as provide a logical grouping of the data. Tools available on the portal, such as the Data Analysis Tool, a data visualization and high-performance environment for sea level analysis, and the Virtual Earth System Laboratory, a 3D simulation application, describes and links to the source data. With over 30K Facebook followers and over 23K Twitter follower, the portal outreach team also leverages social media to guide users to relevant data. This presentation focuses on how the portal uses news articles, mission and project pages, tools, and social media to connect users to the data.

User Experience Re-Mastered Your Guide to Getting the Right Design

CERN Document Server

Wilson, Chauncey

2009-01-01

Good user interface design isn’t just about aesthetics or using the latest technology. Designers also need to ensure their product is offering an optimal user experience. This requires user needs analysis, usability testing, persona creation, prototyping, design sketching, and evaluation through-out the design and development process. User Experience Re-Mastered takes tried and tested material from best-selling books in Morgan Kaufmann’s Series in Interactive Technologies and presents it in typical project framework. Chauncey Wilson guides the reader through each chapter, introducing each stag

Wake Vortex Inverse Model User's Guide

Science.gov (United States)

Lai, David; Delisi, Donald

2008-01-01

NorthWest Research Associates (NWRA) has developed an inverse model for inverting landing aircraft vortex data. The data used for the inversion are the time evolution of the lateral transport position and vertical position of both the port and starboard vortices. The inverse model performs iterative forward model runs using various estimates of vortex parameters, vertical crosswind profiles, and vortex circulation as a function of wake age. Forward model predictions of lateral transport and altitude are then compared with the observed data. Differences between the data and model predictions guide the choice of vortex parameter values, crosswind profile and circulation evolution in the next iteration. Iterations are performed until a user-defined criterion is satisfied. Currently, the inverse model is set to stop when the improvement in the rms deviation between the data and model predictions is less than 1 percent for two consecutive iterations. The forward model used in this inverse model is a modified version of the Shear-APA model. A detailed description of this forward model, the inverse model, and its validation are presented in a different report (Lai, Mellman, Robins, and Delisi, 2007). This document is a User's Guide for the Wake Vortex Inverse Model. Section 2 presents an overview of the inverse model program. Execution of the inverse model is described in Section 3. When executing the inverse model, a user is requested to provide the name of an input file which contains the inverse model parameters, the various datasets, and directories needed for the inversion. A detailed description of the list of parameters in the inversion input file is presented in Section 4. A user has an option to save the inversion results of each lidar track in a mat-file (a condensed data file in Matlab format). These saved mat-files can be used for post-inversion analysis. A description of the contents of the saved files is given in Section 5. An example of an inversion input

User guides for the climate adaptation of buildings and infrastructure in Norway – Characteristics and impact

Directory of Open Access Journals (Sweden)

Åshild Lappegard Hauge

2017-04-01

Full Text Available To reduce future damages on buildings and infrastructure, and prepare society for the coming climate challenges, in recent years numerous user guides have been developed. The objective of this study is to provide the first overview and analysis of, the characteristics of the existing guidance material for the climate adaptation of the built environment in Norway. 84 user guides and web portals are mapped and analysed, focusing on target groups and topics. The results are viewed in relation to qualitative interviews with experts responsible for promoting climate adaptation. A large share of the guidance material communicates climate adaptation at a general level rather than in-depth practical measures. The interviews confirm that there is an overwhelming amount of guidance material, and it is suggested that this may cause confusion and uncertainty among users. The study and its findings are placed within a context of the climate services literature, and “user guides” are understood as a type of “climate services product”. A main conclusion is that the abundance of user guides does not automatically lead to better climate adaptation. Too few user guides for climate adaptation sufficiently secure easily accessible information on practical measures. The guides are not broadly utilised, the language and length of the texts are sometimes problematic, and the target groups are often wide or not specified. The results presented may be used in order to develop improved user guides for climate adaptation in societies with similar climate and societal challenges to those in Norway.

Mini-mast CSI testbed user's guide

Science.gov (United States)

Tanner, Sharon E.; Pappa, Richard S.; Sulla, Jeffrey L.; Elliott, Kenny B.; Miserentino, Robert; Bailey, James P.; Cooper, Paul A.; Williams, Boyd L., Jr.; Bruner, Anne M.

1992-01-01

The Mini-Mast testbed is a 20 m generic truss highly representative of future deployable trusses for space applications. It is fully instrumented for system identification and active vibrations control experiments and is used as a ground testbed at NASA-Langley. The facility has actuators and feedback sensors linked via fiber optic cables to the Advanced Real Time Simulation (ARTS) system, where user defined control laws are incorporated into generic controls software. The object of the facility is to conduct comprehensive active vibration control experiments on a dynamically realistic large space structure. A primary goal is to understand the practical effects of simplifying theoretical assumptions. This User's Guide describes the hardware and its primary components, the dynamic characteristics of the test article, the control law implementation process, and the necessary safeguards employed to protect the test article. Suggestions for a strawman controls experiment are also included.

Nuclear computerized library for assessing reactor reliability (NUCLARR): Part 2, Guide to operations: User's guide

International Nuclear Information System (INIS)

Gilmore, W.E.; Gentillon, C.D.; Gertman, D.I.; Beers, G.H.; Galyean, W.J.; Gilbert, B.G.

1988-06-01

The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automated data base management system for processing and storing human error probability and hardware component failure data. The NUCLARR system software resides on an IBM (or compatible) personal micro-computer. NUCLARR can be used by the end user to furnish data inputs for both human and hardware reliability analysis in support of a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. Volume IV of this series is the User's Guide for operating the NUCLARR software and is presented in three parts. This volume, Part 2: Guide to Operations, contains the instructions and basic procedures for using the NUCLARR software. Part 2 provides guidance and information for getting started, performing the desired functions, and making the most efficient use of the system's features

AVS user's guide on the basis of practice

International Nuclear Information System (INIS)

Masuko, Kenji; Kato, Katsumi; Kume, Etsuo; Fujii, Minoru.

1997-07-01

The special guides for the use of visualization software AVS have been developed at Japan Atomic Energy Research Institute (JAERI). The purpose of these guides is to help the AVS users understand easily the use of the one, due to the fact that it is so difficult for beginners to understand the original manuals. In this report, 'Transportation Evacuation Simulation' is taken up as an object of visualization, and the procedure of visualization and images recording by using the AVS are described. By using the AVS according to this report, a series of the procedure which are necessary for use of the AVS can be acquired. (author)

RADTRAN 6/RadCat 6 user guide.

Energy Technology Data Exchange (ETDEWEB)

Weiner, Ruth F.; Hinojosa, Daniel; Heames, Terence John; Farnum, Cathy Ottinger; Kalinina, Elena Arkadievna

2013-09-01

This document provides a detailed discussion and a guide for the use of the RadCat 6.0 Graphical User Interface input file generator for the RADTRAN code, Version 6. RadCat 6.0 integrates the newest analysis capabilities of RADTRAN 6.0, including an economic model, updated loss-of-lead shielding model, a new ingestion dose model, and unit conversion. As of this writing, the RADTRAN version in use is RADTRAN 6.02.

Using soft constraints to guide users in flexible business process management systems

DEFF Research Database (Denmark)

Stefansen, Christian; Borch, Signe Ellegård

2008-01-01

Current Business Process Management Systems (BPMS) allow designers to specify processes in highly expressive languages supporting numerous control flow constructs, exceptions, complex predicates, etc., but process specifications are expressed in terms of hard constraints, and this leads...... to an unfortunate trade off: information about preferred practices must either be abandoned or promoted to hard constraints. If abandoned, the BPMS cannot guide its users; if promoted to hard constraints, it becomes a hindrance when unanticipated deviations occur. Soft constraints can make this trade-off less...... painful. Soft constraints specify what rules can be violated and by how much. With soft constraints, the BPMS knows what deviations it can permit, and it can guide the user through the process. The BPMS should allow designers to easily specify soft goals and allow its users to immediately see...

Jobs and Economic Development Impact (JEDI) User Reference Guide: Fast Pyrolysis Biorefinery Model

Energy Technology Data Exchange (ETDEWEB)

Zhang, Yimin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Goldberg, Marshall [MRG and Associates, Nevada City, CA (United States)

2015-02-01

This guide -- the JEDI Fast Pyrolysis Biorefinery Model User Reference Guide -- was developed to assist users in operating and understanding the JEDI Fast Pyrolysis Biorefinery Model. The guide provides information on the model's underlying methodology, as well as the parameters and data sources used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features and a discussion of how the results should be interpreted. Based on project-specific inputs from the user, the JEDI Fast Pyrolysis Biorefinery Model estimates local (e.g., county- or state-level) job creation, earnings, and output from total economic activity for a given fast pyrolysis biorefinery. These estimates include the direct, indirect and induced economic impacts to the local economy associated with the construction and operation phases of biorefinery projects.Local revenue and supply chain impacts as well as induced impacts are estimated using economic multipliers derived from the IMPLAN software program. By determining the local economic impacts and job creation for a proposed biorefinery, the JEDI Fast Pyrolysis Biorefinery Model can be used to field questions about the added value biorefineries might bring to a local community.

Characteristics of spent fuel, high-level waste, and other radioactive wastes which may require long-term isolation: Appendix 2B, User's guide to the LWR assemblies data base, Appendix 2C, User's guide to the LWR radiological data base, Appendix 2D, User's guide to the LWR quantities data base

International Nuclear Information System (INIS)

1987-12-01

This User's Guide for the LWR Assemblies data base system is part of the Characteristics Data Base being developed under the Waste Systems Data Development Program. The objective of the LWR Assemblies data base is to provide access at the personal computer level to information about fuel assemblies used in light-water reactors. The information available is physical descriptions of intact fuel assemblies and radiological descriptions of spent fuel disassembly hardware. The LWR Assemblies data base is a user-oriented menu driven system. Each menu is instructive about its use. Section 5 of this guide provides a sample session with the data base to assist the user

MSTS. Multiphase Subsurface Transport Simulator User`s Guide and Reference

Energy Technology Data Exchange (ETDEWEB)

Nichols, W.E.; White, M.D.

1993-05-01

This User`s Guide and Reference provides information and instructions on the use of the Multiphase Subsurface Transport Simulator (MSTS) code and the associated MSTS Graphical Input. The MSTS code is used to simulate water flow, air flow, heat transfer, and dilute species mass transport in variably saturated geologic media for one, two, or three dimensions using an integrated finite-difference numerical scheme. Any or all of these processes may be simulated in a fully coupled manner. MSTS is a two-phase, two-component code with secondary processes that include binary diffusion and vapor pressure lowering. The geologic media may be homogeneous or heterogeneous, isotropic or anisotropic, and unfractured or highly fractured. A problem geometry may be described by either Cartesian or cylindrical coordinates. MSTS is written in FORTRAN 77, following the American National Standards Institute (ANSI) standards, and is machine-independent with the exception of some time and date calls required for quality control (provisions are made in the code for relatively easy adoption to a number of machines for these calls).

A User's Guide to the SNF ampersand INEL EIS

International Nuclear Information System (INIS)

1995-01-01

This User's Guide is intended to help you find information in the SNF and INEL EIS (that's short for US Department of Energy Programmatic Spent Nuclear Fuel Management and Idaho National Engineering Laboratory Environmental Restoration and Waste Management Programs Final Environmental Impact Statement). The first section of this Guide gives you a brief overview of the SNF ampersand INEL EIS., The second section is organized to help you find specific information in the Environmental Impact Statement -- whether you're interested in a management alternative, a particular site (such as Hanford), or a discipline (such as land use or water quality)

Revised user's guide to the 'DISPOSALS' model

International Nuclear Information System (INIS)

Laundy, R.S.; James, A.R.; Groom, M.S.; LeJeune, S.R.

1985-04-01

This report provides a User's Guide to the 'DISPOSALS' computer model and includes instructions on how to set up and run a specific problem together with details of the scope, theoretical basis, data requirements and capabilities of the model. The function of the 'DISPOSALS' model is to make assignments of nuclear waste material in an optimum manner to a number of disposal sites each subject to a number of constraints such as limits on the volume and activity. The user is able to vary the number of disposal sites, the range and limits of the constraints to be applied to each disposal site and the objective function for optimisation. The model is based on the Linear Programming technique and uses CAP Scientific's LAMPS and MAGIC packages. Currently the model has been implemented on CAP Scientific's VAX 11/750 minicomputer. (author)

NODC Standard Product: Global ocean temperature and salinity profiles (2 disc set) (NODC Accession 0098058)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This set of CD-ROMs contains global ocean temperature and salinity profiles derived from NODC archive data files. It includes oceanographic station (bottle) data,...

Users' guide to CACECO containment analysis code. [LMFBR

Energy Technology Data Exchange (ETDEWEB)

Peak, R.D.

1979-06-01

The CACECO containment analysis code was developed to predict the thermodynamic responses of LMFBR containment facilities to a variety of accidents. The code is included in the National Energy Software Center Library at Argonne National Laboratory as Program No. 762. This users' guide describes the CACECO code and its data input requirements. The code description covers the many mathematical models used and the approximations used in their solution. The descriptions are detailed to the extent that the user can modify the code to suit his unique needs, and, indeed, the reader is urged to consider code modification acceptable.

EURALERT-89 user's guide

International Nuclear Information System (INIS)

Mueller, H.; Friedland, W.; Proehl, G.; Paretzke, H.G.

1990-09-01

EURALERT-89 is a dose assessment program system including countermeasures which has been developed in the framework of the C.E.C. research programme 'Radiological aspects of nuclear accident scenarios'. For this purpose the ECOSYS model for calculating the transfer of radionuclides through the environment, the contamination of foodstuffs and potential doses has been adapted to real-time use in the different European countries. In this user's guide the file names are given in the form SUBD/FNAM; this means that the data file with name FNAM is in the subdirectory SUBD. Remember that writing the path of a file depends on the computer used. With EURALERT-89 it is relatively simple to get an estimate of the most important informations (deposition, maximum specific activities in foodstuffs, most important dose values) for all locations which are included in the input file. This goal can be achieved with only a few commands. (orig./HP)

Presto users guide version 2.6.

Energy Technology Data Exchange (ETDEWEB)

Gullerud, Arne S.; Koteras, James Richard; Hales, Jason Dean; Crane, Nathan Karl

2006-10-01

Presto is a Lagrangian, three-dimensional explicit, transient dynamics code for the analysis of solids subjected to large, suddenly applied loads. Presto is designed for problems with large deformations, nonlinear material behavior, and contact. There is a versatile element library incorporating both continuum and structural elements. The code is designed for a parallel computing environment. This document describes the input for the code that gives users access to all of the current functionality in the code. Presto is built in an environment that allows it to be coupled with other engineering analysis codes. The input structure for the code, which uses a concept called scope, reflects the fact that Presto can be used in a coupled environment. This guide describes the scope concept and the input from the outermost to the innermost input scopes. Within a given scope, the descriptions of input commands are grouped based on code functionality. For example, all material input command lines are described in a section of the user's guide for all of the material models in the code.

A guide to MATLAB for beginners and experienced users

CERN Document Server

Hunt, Brian R; Rosenberg, Jonathan M

2014-01-01

Now in its third edition, this outstanding textbook explains everything you need to get started using MATLAB®. It contains concise explanations of essential MATLAB commands, as well as easily understood instructions for using MATLAB's programming features, graphical capabilities, simulation models, and rich desktop interface. MATLAB 8 and its new user interface is treated extensively in the book. New features in this edition include: a complete treatment of MATLAB's publish feature; new material on MATLAB graphics, enabling the user to master quickly the various symbolic and numerical plotting routines; and a robust presentation of MuPAD® and how to use it as a stand-alone platform. The authors have also updated the text throughout, reworking examples and exploring new applications. The book is essential reading for beginners, occasional users and experienced users wishing to brush up their skills. Further resources are available from the authors' website at www-math.umd.edu/schol/a-guide-to-matlab.html.

Application for TJ-II Signals Visualization: User's Guide

International Nuclear Information System (INIS)

Sanchez, E.; Portas, A. B.; Cremy, C.; Vega, J.

2000-01-01

In this documents are described the functionalities of the application developed by the Data Acquisition Group for TJ-II signal visualization. There are two versions of the application, the On-line version, used for signal visualization during TJ-II operation, and the Off-line version, used for signal visualization without TJ-II operation. Both versions of the application consist in a graphical user interface developed for X/Motif, in which most of the actions can be done using the mouse buttons. The functionalities of both versions of the application are described in this user's guide, beginning at the application start-up and explaining in detail all the options that it provides and the actions that can be done with each graphic control. (Author) 8 refs

Petroleum Refinery Jobs and Economic Development Impact (JEDI) Model User Reference Guide

Energy Technology Data Exchange (ETDEWEB)

Goldberg, Marshall [MRG and Associates, Nevada City, CA (United States)

2013-12-31

The Jobs and Economic Development Impact (JEDI) models, developed through the National Renewable Energy Laboratory (NREL), are user-friendly tools utilized to estimate the economic impacts at the local level of constructing and operating fuel and power generation projects for a range of conventional and renewable energy technologies. The JEDI Petroleum Refinery Model User Reference Guide was developed to assist users in employing and understanding the model. This guide provides information on the model's underlying methodology, as well as the parameters and references used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features, operation of the model, and a discussion of how the results should be interpreted. Based on project-specific inputs from the user, the model estimates job creation, earning and output (total economic activity) for a given petroleum refinery. This includes the direct, indirect and induced economic impacts to the local economy associated with the refinery's construction and operation phases. Project cost and job data used in the model are derived from the most current cost estimations available. Local direct and indirect economic impacts are estimated using economic multipliers derived from IMPLAN software. By determining the regional economic impacts and job creation for a proposed refinery, the JEDI Petroleum Refinery model can be used to field questions about the added value refineries may bring to the local community.

Development of a user interface style guide for the reactor protection system cabinet operator module

International Nuclear Information System (INIS)

Lee, Hyun-Chul; Lee, Dong-Young; Lee, Jung-Woon

2004-01-01

The reactor protection system (RPS) plays the roles of generating the reactor trip signal and the engineered safety features (ESF) actuation signal when the monitored plant processes reach the predefined limits. A Korean project group is developing a new digitalized RPS and the Cabinet Operator Module (COM) of the RPS is used for the RPS integrity testing and monitoring by an equipment operator. A flat panel display (FPD) with a touch screen capability is provided as a main user interface for the RPS operation. To support the RPS COM user interface design, actually the FPD screen design, we developed a user interface style guide because the system designer could not properly deal with the many general human factors design guidelines. To develop the user interface style guide, various design guideline gatherings, a walk-though with a video recorder, guideline selection with respect to user interface design elements, determination of the properties of the design elements, discussion with system designers, and a conversion of the properties into the screen design were carried out. This paper describes the process details and the findings in the course of the style guide development. (Author)

Hanford ground-water data base management guide and user's manual

International Nuclear Information System (INIS)

Mitchell, P.J.; Argo, R.S.; Bradymire, S.L.; Newbill, C.A.

1985-05-01

This management guide and user's manual is a working document for the computerized Hanford Ground-water Data Base maintained by the Geosciences Research and Engineering Department at Pacific Northwest Laboratory for the Hanford Ground-Water Surveillance Program. The program is managed by the Occupational and Environmental Protection Department for the US Department of Energy. The data base is maintained to provide rapid access to data that are rountinely collected from ground-water monitoring wells at the Hanford site. The data include water levels, sample analyses, geologic descriptions and well construction information of over 3000 existing or destroyed wells. These data are used to monitor water quality and for the evaluation of ground-water flow and pollutant transport problems. The management guide gives instructions for maintenance of the data base on the Digital Equipment Corporation PDP 11/70 Computer using the CIRMIS (Comprehensive Information Retrieval and Model Input Sequence) data base management software developed at Pacific Northwest Laboratory. Maintenance activities include inserting, modifying and deleting data, making back-up copies of the data base, and generating tables for annual monitoring reports. The user's guide includes instructions for running programs to retrieve the data in the form of listings of graphical plots. 3 refs

A user`s guide to LHS: Sandia`s Latin Hypercube Sampling Software

Energy Technology Data Exchange (ETDEWEB)

Wyss, G.D.; Jorgensen, K.H. [Sandia National Labs., Albuquerque, NM (United States). Risk Assessment and Systems Modeling Dept.

1998-02-01

This document is a reference guide for LHS, Sandia`s Latin Hypercube Sampling Software. This software has been developed to generate either Latin hypercube or random multivariate samples. The Latin hypercube technique employs a constrained sampling scheme, whereas random sampling corresponds to a simple Monte Carlo technique. The present program replaces the previous Latin hypercube sampling program developed at Sandia National Laboratories (SAND83-2365). This manual covers the theory behind stratified sampling as well as use of the LHS code both with the Windows graphical user interface and in the stand-alone mode.

Security for small computer systems a practical guide for users

CERN Document Server

Saddington, Tricia

1988-01-01

Security for Small Computer Systems: A Practical Guide for Users is a guidebook for security concerns for small computers. The book provides security advice for the end-users of small computers in different aspects of computing security. Chapter 1 discusses the security and threats, and Chapter 2 covers the physical aspect of computer security. The text also talks about the protection of data, and then deals with the defenses against fraud. Survival planning and risk assessment are also encompassed. The last chapter tackles security management from an organizational perspective. The bo

User's guide for FRMOD, a zero dimensional FRM burn code

International Nuclear Information System (INIS)

Driemeryer, D.; Miley, G.H.

1979-01-01

The zero-dimensional FRM plasma burn code, FRMOD is written in the FORTRAN language and is currently available on the Control Data Corporation (CDC) 7600 computer at the Magnetic Fusion Energy Computer Center (MFECC), sponsored by the US Department of Energy, in Livermore, CA. This guide assumes that the user is familiar with the system architecture and some of the utility programs available on the MFE-7600 machine, since online documentation is available for system routines through the use of the DOCUMENT utility. Users may therefore refer to it for answers to system related questions

Visual Sample Plan Version 7.0 User's Guide

Energy Technology Data Exchange (ETDEWEB)

Matzke, Brett D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Newburn, Lisa LN [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hathaway, John E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bramer, Lisa M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Wilson, John E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dowson, Scott T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sego, Landon H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pulsipher, Brent A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2014-03-01

User's guide for VSP 7.0 This user's guide describes Visual Sample Plan (VSP) Version 7.0 and provides instructions for using the software. VSP selects the appropriate number and location of environmental samples to ensure that the results of statistical tests performed to provide input to risk decisions have the required confidence and performance. VSP Version 7.0 provides sample-size equations or algorithms needed by specific statistical tests appropriate for specific environmental sampling objectives. It also provides data quality assessment and statistical analysis functions to support evaluation of the data and determine whether the data support decisions regarding sites suspected of contamination. The easy-to-use program is highly visual and graphic. VSP runs on personal computers with Microsoft Windows operating systems (XP, Vista, Windows 7, and Windows 8). Designed primarily for project managers and users without expertise in statistics, VSP is applicable to two- and three-dimensional populations to be sampled (e.g., rooms and buildings, surface soil, a defined layer of subsurface soil, water bodies, and other similar applications) for studies of environmental quality. VSP is also applicable for designing sampling plans for assessing chem/rad/bio threat and hazard identification within rooms and buildings, and for designing geophysical surveys for unexploded ordnance (UXO) identification.

Documentation and user's guide for DOSTOMAN: a pathways computer model of radionuclide movement

International Nuclear Information System (INIS)

Root, R.W. Jr.

1980-01-01

This report documents the mathematical development and the computer implementation of the Savannah River Laboratory computer code used to simulate radonuclide movement in the environment. The user's guide provides all the necessary information for the prospective user to input the required data, execute the computer program, and display the results

Functional Behavioral Assessment: An Interactive Training Module. User's Manual & Facilitator's Guide. Second Edition.

Science.gov (United States)

Liaupsin, Carl J.; Scott, Terry M.; Nelson, C. Michael

This user's manual and facilitator's guide is intended for use with an accompanying interactive CD-ROM to provide a complete training program in conducting functional behavioral assessments (FBAs) as required under the 1997 reauthorization of the Individuals with Disabilities Education Act. Chapter 1 provides general information for users, such as…

NODC Standard Format Marine Toxic Substances and Pollutants (F144) chemical identification codes (NODC Accession 9200273)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This archival information package contains a listing of codes and chemical names that were used in NODC Standard Format Marine Toxic Substances and Pollutants (F144)...

Basic user guide for the radwaste treatment plant computer system

International Nuclear Information System (INIS)

Keel, A.

1990-07-01

This guide has been produced as an aid to using the Radwaste Treatment Plant computer system. It is designed to help new users to use the database menu system. Some of the forms can be used in ways different from those explained and more complex queries can be performed. (UK)

A users guide for the radioactive waste management code 'SIMULATION 2'

International Nuclear Information System (INIS)

Moore, D.; Tymons, B.J.

1984-09-01

This report is a users' guide to the radioactive waste management program SIMULATION. It gives a complete description of the calculational method used (with worked examples) a specification of the input data requirements, and samples of printout from the program. (author)

H2A Production Model, Version 2 User Guide

Energy Technology Data Exchange (ETDEWEB)

Steward, D.; Ramsden, T.; Zuboy, J.

2008-09-01

The H2A Production Model analyzes the technical and economic aspects of central and forecourt hydrogen production technologies. Using a standard discounted cash flow rate of return methodology, it determines the minimum hydrogen selling price, including a specified after-tax internal rate of return from the production technology. Users have the option of accepting default technology input values--such as capital costs, operating costs, and capacity factor--from established H2A production technology cases or entering custom values. Users can also modify the model's financial inputs. This new version of the H2A Production Model features enhanced usability and functionality. Input fields are consolidated and simplified. New capabilities include performing sensitivity analyses and scaling analyses to various plant sizes. This User Guide helps users already familiar with the basic tenets of H2A hydrogen production cost analysis get started using the new version of the model. It introduces the basic elements of the model then describes the function and use of each of its worksheets.

Electronic Field Guides and User Communities in the Eco-informatics Revolution

Directory of Open Access Journals (Sweden)

R. D. Stevenson

2003-07-01

Full Text Available The recognition that taxonomy is central to the conservation of biodiversity has reestablished the critical role of taxonomy in biology. However, many of the tools taxonomists produce for the identification and characterization of species, e.g., dichotomous keys, have been difficult to use and largely ignored by the general public in favor of field guides, which are essentially browsable picture guides. We review the role of field guides in species identification and discuss the application of a host of digital technologies to produce user-friendly tools for identification that are likely to greatly enhance species identification in the field by nonspecialists. We suggest that wider adoption of the citizen science model and the use of electronic field guides will enhance public understanding and participation in biodiversity monitoring.

User's guide to the biosphere code ECOS

International Nuclear Information System (INIS)

Kane, P.; Thorne, M.C.

1984-10-01

This report constitutes the user's guide to the biosphere model ECOS and provides a detailed description of the processes modelled and mathematical formulations used. The FORTRAN code ECOS is an equilibrium-type compartmental biosphere code. ECOS was designed with the objective of producing a general but comprehensive code for use in the assessment of the radiological impact of unspecified geological repositories for radioactive waste. ECOS transforms the rate of release of activity from the geosphere to the rate of accumulation of weighted committed effective dose equivalent (dose). Both maximum individual dose (critical group dose) and collective dose rates may be computed. (author)

State criminal justice telecommunications (STACOM). Volume 4: Network design software user's guide

Science.gov (United States)

Lee, J. J.

1977-01-01

A user's guide to the network design program is presented. The program is written in FORTRAN V and implemented on a UNIVAC 1108 computer under the EXEC-8 operating system which enables the user to construct least-cost network topologies for criminal justice digital telecommunications networks. A complete description of program features, inputs, processing logic, and outputs is presented, and a sample run and a program listing are included.

User interface user's guide for HYPGEN

Science.gov (United States)

Chiu, Ing-Tsau

1992-01-01

The user interface (UI) of HYPGEN is developed using Panel Library to shorten the learning curve for new users and provide easier ways to run HYPGEN for casual users as well as for advanced users. Menus, buttons, sliders, and type-in fields are used extensively in UI to allow users to point and click with a mouse to choose various available options or to change values of parameters. On-line help is provided to give users information on using UI without consulting the manual. Default values are set for most parameters and boundary conditions are determined by UI to further reduce the effort needed to run HYPGEN; however, users are free to make any changes and save it in a file for later use. A hook to PLOT3D is built in to allow graphics manipulation. The viewpoint and min/max box for PLOT3D windows are computed by UI and saved in a PLOT3D journal file. For large grids which take a long time to generate on workstations, the grid generator (HYPGEN) can be run on faster computers such as Crays, while UI stays at the workstation.

Code manual for MACCS2: Volume 1, user`s guide

Energy Technology Data Exchange (ETDEWEB)

Chanin, D.I.; Young, M.L.

1997-03-01

This report describes the use of the MACCS2 code. The document is primarily a user`s guide, though some model description information is included. MACCS2 represents a major enhancement of its predecessor MACCS, the MELCOR Accident Consequence Code System. MACCS, distributed by government code centers since 1990, was developed to evaluate the impacts of severe accidents at nuclear power plants on the surrounding public. The principal phenomena considered are atmospheric transport and deposition under time-variant meteorology, short- and long-term mitigative actions and exposure pathways, deterministic and stochastic health effects, and economic costs. No other U.S. code that is publicly available at present offers all these capabilities. MACCS2 was developed as a general-purpose tool applicable to diverse reactor and nonreactor facilities licensed by the Nuclear Regulatory Commission or operated by the Department of Energy or the Department of Defense. The MACCS2 package includes three primary enhancements: (1) a more flexible emergency-response model, (2) an expanded library of radionuclides, and (3) a semidynamic food-chain model. Other improvements are in the areas of phenomenological modeling and new output options. Initial installation of the code, written in FORTRAN 77, requires a 486 or higher IBM-compatible PC with 8 MB of RAM.

xLPR Sim Editor 1.0 User's Guide

Energy Technology Data Exchange (ETDEWEB)

Mariner, Paul

2017-03-01

The United States Nuclear Regulatory Commission in cooperation with the Electric Power Research Institute contracted Sandia National Laboratories to develop the framework of a probabilistic fracture mechanics assessment code called xLPR ( Extremely Low Probability of Rupture) Version 2.0 . The purpose of xLPR is to evaluate degradation mechanisms in piping systems at nuclear power plants and to predict the probability of rupture. This report is a user's guide for xLPR Sim Editor 1.0 , a graphical user interface for creating and editing the xLPR Version 2.0 input file and for creating, editing, and using the xLPR Version 2.0 database files . The xLPR Sim Editor, provides a user - friendly way for users to change simulation options and input values, s elect input datasets from xLPR data bases, identify inputs needed for a simulation, and create and modify an input file for xLPR.

Users guide for evaluating alternative fixed-site physical protection systems using ''FESEM''

International Nuclear Information System (INIS)

Chapman, L.D.; Kinemond, G.A.; Sasser, D.W.

1977-11-01

The objective of this manual is to provide a guide for evaluating physical protection systems using the Forcible Entry Safeguards Effectiveness Model (FESEM). It is intended for use by personnel involved in evaluating fixed-site security systems, or managers involved in making decisions related to the modification of existing protection systems or the implementation of new systems. This users' guide has been written for an audience which has some previous computer experience

Patriot Script 1.0.13 User Guide for PEM 1.3.2

Energy Technology Data Exchange (ETDEWEB)

Cleland, Timothy James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Kubicek, Deborah Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Stroud, Phillip David [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cuellar-Hengartner, Leticia [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mathis, Mark [Descartes Labs, Inc., Los Alamos, NM (United States)

2015-11-02

This document provides an updated user guide for Patriot Script Version 1.0.13, for release with PEM 1.3.1 (LAUR-1422817) that adds description and instructions for the new excursion capability (see section 4.5.1).

SWEPP gamma-ray spectrometer system software user's guide

International Nuclear Information System (INIS)

Femec, D.A.

1994-08-01

The SWEPP Gamma-Ray Spectrometer (SGRS) System has been developed by the Radiation Measurement and Development Unit of the Idaho National Engineering Laboratory to assist in the characterization of the radiological contents of contact-handled waste containers at the Stored Waste Examination Pilot Plant (SWEPP). In addition to determining the concentrations of gamma-ray-emitting radionuclides, the software also calculates attenuation-corrected isotopic mass ratios of specific interest, and provides controls for SGRS hardware as required. This document serves as a user's guide for the data acquisition and analysis software associated with the SGRS system

MADS Users' Guide

Science.gov (United States)

Moerder, Daniel D.

2014-01-01

MADS (Minimization Assistant for Dynamical Systems) is a trajectory optimization code in which a user-specified performance measure is directly minimized, subject to constraints placed on a low-order discretization of user-supplied plant ordinary differential equations. This document describes the mathematical formulation of the set of trajectory optimization problems for which MADS is suitable, and describes the user interface. Usage examples are provided.

BUGS at work : a bicycle user group guide

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-07-01

This guide provides practical advice to cyclists on how start a Bicycle User Group (BUG) at their workplace. It offers tools to encourage employers to be proactive in improving facilities in support of cycle commuting. Several BUGs across Canada have worked towards getting better bicycle parking, lockers and shower facilities at their workplace. Other incentives include policies such as flexible work hours for cyclist commuters; casual dress on Friday; reimbursement for the subsidized cost of free parking provided by employers; and, use of a company car if needed for company business during the work day. The advantages to employers include: reduced health care costs because cyclists are physically fit; decreased absenteeism; increased productivity; reduced parking costs; lower company transportation bills; and, a greener corporate image. BUGs provide cycling information ranging from cycling maps to pamphlets and they raise cycle awareness. This guide includes cycling survey samples and examples of successful BUG activities across Canada. refs., tabs., figs.

Dynamic behavior of district heating systems. 2. User's guide

International Nuclear Information System (INIS)

Kunz, J.

1993-01-01

This user's guide consists of three parts. The first part describes the characteristics and performance of the dynamic simulation code for district heating systems DYNAM. It shows how to prepare a personal computer for this program and how to install it. The second part shows how to prepare the data for a simulation and how to use the simulation program. Those two sections are for the user who intends to use the code for the simulation of district heating systems. He also learns to prepare the necessary data for his specific problems. The third section is intended for the programmer who desires to improve the program. It explains the main calculation units and shows the parts of the program which seem most important for an improvement. (author) 4 figs

Contraception for the first time users: a problem-orientated guide to ...

African Journals Online (AJOL)

Contraception for the first time users: a problem-orientated guide to product selection and safe prescription. W M Kruger, O S Steyn. Abstract. No Abstract South African Family Practice Vol. 49 (8) 2007: pp.44-50. Full Text: EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL ...

NODC Report: Kenya

OpenAIRE

2000-01-01

The Kenya National Oceanographic Data Center (KeNODC) began operating in January 1997. The first set of activities included identification of staff members and setting up of office infrastructure. Amidst all this, the Center conducted the first planning mission in March 1997 to set out priorities for action. Foremost were the duty allocations among the four staff members designated by KMFRI. This has been followed by a familiarization of a number of IODE policy documents and manuals for op...

Sierra/SolidMechanics 4.48 User's Guide: Addendum for Shock Capabilities.

Energy Technology Data Exchange (ETDEWEB)

Plews, Julia A.; Crane, Nathan K; de Frias, Gabriel Jose; Le, San; Littlewood, David John; Merewether, Mark Thomas; Mosby, Matthew David; Pierson, Kendall H.; Porter, Vicki L.; Shelton, Timothy; Thomas, Jesse David; Tupek, Michael R.; Veilleux, Michael; Xavier, Patrick G.

2018-03-01

This is an addendum to the Sierra/SolidMechanics 4.48 User's Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export-control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export-control requirements. The ITAR enhancements to Sierra/SM in- clude material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. Since this is an addendum to the standard Sierra/SM user's guide, please refer to that document first for general descriptions of code capability and use.

Wind-US Users Guide Version 4.0

Science.gov (United States)

Yoder, Dennis A.

2016-01-01

Wind-US is a computational platform which may be used to numerically solve various sets of equations governing physical phenomena. Currently, the code supports the solution of the Euler and Navier-Stokes equations of fluid mechanics, along with supporting equation sets governing turbulent and chemically reacting flows. Wind-US is a product of the NPARC Alliance, a partnership between the NASA Glenn Research Center (GRC) and the Arnold Engineering Development Complex (AEDC) dedicated to the establishment of a national, applications-oriented flow simulation capability. The Boeing Company has also been closely associated with the Alliance since its inception, and represents the interests of the NPARC User's Association. The "Wind-US User's Guide" describes the operation and use of Wind-US, including: a basic tutorial; the physical and numerical models that are used; the boundary conditions; monitoring convergence; the files that are read and/or written; parallel execution; and a complete list of input keywords and test options. For current information about Wind-US and the NPARC Alliance, please see the Wind-US home page at http://www.grc.nasa.gov/WWW/winddocs/ and the NPARC Alliance home page at http://www.grc.nasa.gov/WWW/wind/.

WASP (Wavelet Analysis of Secondary Particles Angular Distributions) package. Version 1.0. User's guide

International Nuclear Information System (INIS)

Solov'ev, A.G.

2001-01-01

WASP package is a C++ program aimed to analyze angular distributions of secondary particles generated in nuclear interactions. (WASP is designed for data analysis of the STAR and ALICE experiments). It uses a wavelet analysis for this purpose and the vanishing momentum or gaussian wavelets are chosen for transformations. WASP provides an user-friendly Graphical User Interface (GUI) which makes it quite simple to use. WASP design, a brief description of the used wavelet transformation algorithm and GUI are presented in this user's guide

User's guide of DETRAS system-3. Description of the simulated reactor plant

International Nuclear Information System (INIS)

Yamaguchi, Yukichi

2006-12-01

DETRAS system is a PWR reactor simulator system for operation trainings whose distinguished feature is that it can be operated from the remote place of the simulator site. The document which is the third one of a series of three volumes of the user's guide of DETRAS, describes firstly an outline of the simulated reactor system then a user's interface needed for operation of the simulator of interest and finally a series of procedure for startup of the simulated reactor and shutdown of it from its rated operation state. (author)

USER'S GUIDE TO THE PERSONAL COMPUTER VERSION OF THE BIOGENIC EMISSIONS INVENTORY SYSTEM (PC-BEIS2)

Science.gov (United States)

The document is a user's guide for an updated Personal Computer version of the Biogenic Emissions Inventory System (PC-BEIS2), allowing users to estimate hourly emissions of biogenic volatile organic compounds (BVOCs) and soil nitrogen oxide emissions for any county in the contig...

A user's guide for the program NAMMU

International Nuclear Information System (INIS)

Wickens, L.M.

1981-09-01

NAMMU is a computer program developed to model single-phase fluid flow in a porous medium. Heat sources may be included if required. Part 1 of this user guide described the program NAMMU in some detail. Here NAMMU is used to solve a specific example problem. The intention is to illustrate the use of the program, highlighting its flexible nature as well as providing a convenient source of information on how to implement NAMMU. The geology, topography and characteristics of the waste repository used in the example are invented just for this illustration and are not representing any real situation. Also, the pathlines calculated and referred to in this paper are for water particles and will not be the same as pathlines for migrating radionuclides. (author)

RadCat 3.0 user guide.

Energy Technology Data Exchange (ETDEWEB)

Hinojosa, Daniel; Penisten, Janelle J.; Dennis, Matthew L.; Osborn, Douglas M.; Weiner, Ruth F.; Heames, Terence John; Marincel, Michelle K.

2009-05-01

RADTRAN is an internationally accepted program and code for calculating the risks of transporting radioactive materials. The first versions of the program, RADTRAN I and II, were developed for NUREG-0170 (USNRC, 1977), the first environmental statement on transportation of radioactive materials. RADTRAN and its associated software have undergone a number of improvements and advances consistent with improvements in both available data and computer technology. The version of RADTRAN currently bundled with RadCat is RADTRAN 6.0. This document provides a detailed discussion and a guide for the use of the RadCat 3.0 Graphical User Interface input file generator for the RADTRAN code. RadCat 3.0 integrates the newest analysis capabilities of RADTRAN 6.0 which includes an economic model, updated loss-of-lead shielding model, and unit conversion. As of this writing, the RADTRAN version in use is RADTRAN 6.0.

WATER DEPTH and Other Data (NODC Accession 9200271)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The data in this accession was submitted to NODC as part of Data Rescue & Archaeology project by International Council for Exploration of the Sea (ICES),...

Development of the FIFI digital simulation language and an up-to-date users guide

International Nuclear Information System (INIS)

Hopkinson, A.

1976-03-01

The report describes some recent improvements to the FIFI digital simulation language following its conversion to FORTRAN IV for use on ICL 4-70 computers and including a stand alone guide for users. (author)

A user's guide to the reactor containment module NECTAR-SIRKIT

International Nuclear Information System (INIS)

Barker, C.D.

1982-02-01

The NECTAR environmental computer code has been developed to meet the increasing demand for comprehensive calculations of the radiological consequences of atmospheric releases of radioactivity. The code contains five calculational modules and this report presents a user's guide to the reactor containment module NECTAR-SIRKIT. The mathematical models employed in NECTAR-SIRKIT are briefly described and a complete specification of the input data required by the module is given. These data include facilities for specifying the fuel inventory, the release from irradiated fuel, primary and secondary containment parameters, filtration parameters and commands to identify the lineprinter output required. Three sample test cases are included in an Appendix to demonstrate some of the different ways in which the program may be used and also to provide examples for the prospective user. (author)

DEPTH - OBSERVATION and Other Data (NODC Accession 9600038)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Temperature, Salinity and Chemistry data from 12 stations in this accession was digitized at NODC from hardcopy. The data was collected as part of Global Ocean...

CaWingz user's guide

International Nuclear Information System (INIS)

Cha, Ben-chin.

1994-01-01

This document assumes that you have read and understood the Wingz user's manuals. CaWingz is an external Wingz program which, when combined with a set of script files, provides easy-to-use EPICS channel access interface functions for Wingz users. The external function run allows Wingz user to invoke any Unix processor within caWingz. Few additional functions for accessing static database field and monitoring of value change event is available for EPICS users after release 3.11. The functions, script files, and usage are briefly described in this document. The script files supplied here serve as examples only. Users are responsible for generating their own spreadsheet and script files. CaWingz communicates with IOC through channel access function calls

A novel graphical user interface for ultrasound-guided shoulder arthroscopic surgery

Science.gov (United States)

Tyryshkin, K.; Mousavi, P.; Beek, M.; Pichora, D.; Abolmaesumi, P.

2007-03-01

This paper presents a novel graphical user interface developed for a navigation system for ultrasound-guided computer-assisted shoulder arthroscopic surgery. The envisioned purpose of the interface is to assist the surgeon in determining the position and orientation of the arthroscopic camera and other surgical tools within the anatomy of the patient. The user interface features real time position tracking of the arthroscopic instruments with an optical tracking system, and visualization of their graphical representations relative to a three-dimensional shoulder surface model of the patient, created from computed tomography images. In addition, the developed graphical interface facilitates fast and user-friendly intra-operative calibration of the arthroscope and the arthroscopic burr, capture and segmentation of ultrasound images, and intra-operative registration. A pilot study simulating the computer-aided shoulder arthroscopic procedure on a shoulder phantom demonstrated the speed, efficiency and ease-of-use of the system.

Parallel community climate model: Description and user`s guide

Energy Technology Data Exchange (ETDEWEB)

Drake, J.B.; Flanery, R.E.; Semeraro, B.D.; Worley, P.H. [and others

1996-07-15

This report gives an overview of a parallel version of the NCAR Community Climate Model, CCM2, implemented for MIMD massively parallel computers using a message-passing programming paradigm. The parallel implementation was developed on an Intel iPSC/860 with 128 processors and on the Intel Delta with 512 processors, and the initial target platform for the production version of the code is the Intel Paragon with 2048 processors. Because the implementation uses a standard, portable message-passing libraries, the code has been easily ported to other multiprocessors supporting a message-passing programming paradigm. The parallelization strategy used is to decompose the problem domain into geographical patches and assign each processor the computation associated with a distinct subset of the patches. With this decomposition, the physics calculations involve only grid points and data local to a processor and are performed in parallel. Using parallel algorithms developed for the semi-Lagrangian transport, the fast Fourier transform and the Legendre transform, both physics and dynamics are computed in parallel with minimal data movement and modest change to the original CCM2 source code. Sequential or parallel history tapes are written and input files (in history tape format) are read sequentially by the parallel code to promote compatibility with production use of the model on other computer systems. A validation exercise has been performed with the parallel code and is detailed along with some performance numbers on the Intel Paragon and the IBM SP2. A discussion of reproducibility of results is included. A user`s guide for the PCCM2 version 2.1 on the various parallel machines completes the report. Procedures for compilation, setup and execution are given. A discussion of code internals is included for those who may wish to modify and use the program in their own research.

Real-time solar magnetograph operation system software design and user's guide

Science.gov (United States)

Wang, C.

1984-01-01

The Real Time Solar Magnetograph (RTSM) Operation system software design on PDP11/23+ is presented along with the User's Guide. The RTSM operation software is for real time instrumentation control, data collection and data management. The data is used for vector analysis, plotting or graphics display. The processed data is then easily compared with solar data from other sources, such as the Solar Maximum Mission (SMM).

Digital radiography: description and user's guide

International Nuclear Information System (INIS)

Berthel, A.; Bonin, Th.; Cadilhon, S.; Thiery, Ch.; Chatellier, L.; Kaftandjian, V.; Honorat, Ph.; Torrent, J.; Le Brun, A.; Maglaive, J.C.; Moreau, Ph.; Pettier, J.L.; Rebuffel, V.; Roenelle, P.; Roussilhe, J.; Staat, St.; Tahon, M.

2007-01-01

The presented document arises from the work of the group 'Digital Radiography and sensors' of COFREND. It is a collective work of synthesis aimed to analyze the quality parameters of digital images influencing the answer and the diagnosis brought to a given industrial problem. Five families of digital sensors have been studied: 1. Image Intensifier coupled with CCD devices - 2. scintillators coupled with a CCD device- 3. Flat Panels with indirect conversion - 4. Flat Panels with direct electric conversion - 5. Photostimulable Storage Phosphor Screens). In particular, concerning a complete imaging chain, it deals with the notions of magnification, blur (unsharpness) (geometrical, kinetic or internal to the very sensor), noises, scattered radiation, spatial resolution, which is different from the one of analog detectors such as films, Contrast to Noise Ratio (CNR), sensitivity using IQIs, dynamic range, detection quantum efficiency, persistence and temporal resolution. This document is not a standard; it must be understood as a user's guide, and it approaches some essentials corrections to bring to a sensor in order to optimize his efficiency without losing information during the pre-processing phase in the radiographic acquisition. It also introduces some image processing tools commonly used. It can be used as a source document to the future elaboration of a standardisation document. It augurs not at all of the choice of a digital sensor with regard to the traditional radiographic film, but gives bases of reflection to a radio user for a sensible transfer from the classic radiography to the digital radiography. (authors)

NODC Standard Product: World Ocean Circulation Experiment (WOCE) Global Data Resource (GDR), versions 1-3, on CD-ROM and DVD

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC produced twelve (12) CD-ROMs containing WOCE Version 1 project data in the summer of 1998. NODC produced fifteen (15) CD-ROMs containing WOCE Version 2 project...

A user's guide to the atmospheric dispersion module NECTAR-ATMOS

International Nuclear Information System (INIS)

Barker, C.D.

1982-02-01

The NECTAR environmental computer code has been developed to meet the increasing demand for comprehensive calculations of the radiological consequences due to atmospheric releases of radioactivity. The code contains five calculational modules and this report presents a user's guide to the atmospheric dispersion and individual dose evaluation module NECTAR-ATMOS. The mathematical models employed in NECTAR-ATMOS are briefly described and a complete specification of the input data required for the module is given. The program includes facilities for reading in the source terms, for specifying the atmospheric dispersion parameters, for identifying the dose calculations required and for controlling output from the program to lineprinters and to output utility files. Three sample cases are included in an appendix to demonstrate some of the different ways in which the program may be used and also to provide examples for the prospective user. (author)

Rotary engine performance computer program (RCEMAP and RCEMAPPC): User's guide

Science.gov (United States)

Bartrand, Timothy A.; Willis, Edward A.

1993-01-01

This report is a user's guide for a computer code that simulates the performance of several rotary combustion engine configurations. It is intended to assist prospective users in getting started with RCEMAP and/or RCEMAPPC. RCEMAP (Rotary Combustion Engine performance MAP generating code) is the mainframe version, while RCEMAPPC is a simplified subset designed for the personal computer, or PC, environment. Both versions are based on an open, zero-dimensional combustion system model for the prediction of instantaneous pressures, temperature, chemical composition and other in-chamber thermodynamic properties. Both versions predict overall engine performance and thermal characteristics, including bmep, bsfc, exhaust gas temperature, average material temperatures, and turbocharger operating conditions. Required inputs include engine geometry, materials, constants for use in the combustion heat release model, and turbomachinery maps. Illustrative examples and sample input files for both versions are included.

Greenland-Iceland-Norwegian Seas Regional Climatology (NODC Accession 0112824)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — To provide an improved oceanographic foundation and reference for multi-disciplinary studies of the Greenland-Iceland-Norwegian Seas (GINS), NODC developed a new set...

NODC Standard Format Marine Birds from Coastal Alaska and Puget Sound Data (1979): Marine Bird Surveys (F041) (NODC Accession 0014160)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Marine Bird Surveys (F041) is one of a group of seven datasets related to Marine Birds from Coastal Alaska and Puget Sound Data (1979). Each dataset uses the NODC...

NODC Standard Format Marine Birds from Coastal Alaska and Puget Sound Data (1974-1982): Feeding Flock (F037) (NODC Accession 0014157)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Feeding Flock (F037) is one of a group of seven datasets related to Marine Birds from Coastal Alaska and Puget Sound Data (1974 -1982). Each dataset uses the NODC...

User`s guide for the irradiation of experiments in the FTR. Revision 3

Energy Technology Data Exchange (ETDEWEB)

NONE

1990-07-01

This document provides Revision 3 updates the FTR Users Guide. Revision 3 updates Appendix 1 (FFTF Technical Specifications) to include the following: Documentation of the acceptability of handling metal fuel assemblies in the Closed Loop Ex-Vessel Handling Machine (CLEM) and storing them in the Interim Decay Storage (IDS) vessel. Reactivity limit version (utilizing existing FSAR analysis bounds) to allow for the larger beta-effective associated with the addition of enriched uranium metal and oxide experiments to the core. Operational temperature limits for Open Test Assemblies (OTAs) have been expanded to differentiate between 40-foot experiment test articles, 28-foot Post Irradiation Open Test Assemblies (PIOTAs) and the 28-foot Loose Parts Monitor Assemblies (LMPAs) operating under FFTF core Engineering cognizance.

User's guide to the radionuclide inventory and hazard code INVENT

International Nuclear Information System (INIS)

Nancarrow, D.J.; Thorne, M.C.

1986-05-01

This report constitutes the user's guide to the radionuclide inventory and hazard index code INVENT and provides an explanation of the mathematical basis of the code, the database used and operation of the code. INVENT was designed to facilitate the post-closure radiological assessment of land-based repositories for low and intermediate-level wastes. For those radionuclides identified to be of potential significance, it allows the calculation of time-dependent radionuclide activities, hazard indices for both inhalation and ingestion of activity, and photon spectra. (author)

Integrated Reliability and Risk Analysis System (IRRAS) Version 2.0 user's guide

International Nuclear Information System (INIS)

Russell, K.D.; Sattison, M.B.; Rasmuson, D.M.

1990-06-01

The Integrated Reliability and Risk Analysis System (IRRAS) is a state-of-the-art, microcomputer-based probabilistic risk assessment (PRA) model development and analysis tool to address key nuclear plant safety issues. IRRAS is an integrated software tool that gives the user the ability to create and analyze fault trees and accident sequences using a microcomputer. This program provides functions that range from graphical fault tree construction to cut set generation and quantification. Also provided in the system is an integrated full-screen editor for use when interfacing with remote mainframe computer systems. Version 1.0 of the IRRAS program was released in February of 1987. Since that time, many user comments and enhancements have been incorporated into the program providing a much more powerful and user-friendly system. This version has been designated IRRAS 2.0 and is the subject of this user's guide. Version 2.0 of IRRAS provides all of the same capabilities as Version 1.0 and adds a relational data base facility for managing the data, improved functionality, and improved algorithm performance. 9 refs., 292 figs., 4 tabs

Powernext futuresTM front office user's guide

International Nuclear Information System (INIS)

2004-07-01

The introduction of a power exchange in France is a direct response to the opening up of the European electricity markets. Powernext SA is a Multilateral Trading Facility in charge of managing the French power exchange through an optional and anonymous organised exchange offering: - Day-ahead contracts for the management of volume risk on Powernext Day-Ahead TM since 21 November 2001, - Medium term contracts for the management of price risk on Powernext Futures TM since 18 June 2004. This document is the front office user's guide, it presents: the market model (characteristics, regulation, contractual framework), the members (traders, clearers, quotation providers, fees structure), the products (specifications, use, liquidity and market efficiency), the trading system (architecture, hardware and software requirements, installation process and connecting to server), the trading (session, screen, sending an order, order execution). Contracts codifications and a glossary are given in the appendix. (J.S.)

User guide for the SYVAC geosphere program GEO3

International Nuclear Information System (INIS)

Oldfield, S.G.; Broyd, T.W.

1983-11-01

A User Guide for the computer model GEO3, of radionuclide migration through a saturated or unsaturated, multi-layered rock strata. GEO3 uses either a numerical (unsaturated) or analytical (saturated) solution to equations of the one dimensional flow and three dimensional transport of radionuclides in the groundwater, including the effects of linear equilibrium sorption (for porous or fractured media), longitudinal and transverse dispersion, and chain decay for arbitrary chain lengths. The model is designed to be incorporated into the SYVAC (SYstems Variability Analysis Code) computer program, the function of which is to perform generic uncertainty assessments on hypothetical vault-geosphere-biosphere combinations, taking into account parameter variability and uncertainty. (author)

IDRC Connect User Guide

International Development Research Centre (IDRC) Digital Library (Canada)

Kristina Kamichaitis

IDRC Extranet home page, which is an umbrella for a number of applications available to IDRC external users. ... IDRC Connect is not formatted for mobile users. ..... Thesis. • Training Material. • Website. • Working Paper. • Workshop Report.

User`s Guide for the NREL Force and Loads Analysis Program. Version 2.2

Energy Technology Data Exchange (ETDEWEB)

Wright, A D

1992-08-01

The following report gives the reader an overview of and instructions on the proper use of the National Renewable Energy Laboratory Force and Loads Analysis Program (FLAP, version 2.2). It is intended as a tool for prediction of rotor and blade loads and response for two- or three-bladed rigid hub wind turbines. The effects of turbulence are accounted for. The objectives of the report are to give an overview of the code and also show the methods of data input and correct code execution steps in order to model an example two-bladed rigid hub turbine. A large portion of the discussion (Sections 6.0, 7.0, and 8.0) is devoted to the subject of inputting and running the code for wind turbulence effects. The ability to include turbulent wind effects is perhaps the biggest change in the code since the release of FLAP version 2.01 in 1988. This report is intended to be a user`s guide. It does not contain a theoretical discussion on equations of motion, assumptions, underlying theory, etc. It is intended to be used in conjunction with Wright, Buhl, and Thresher (1988).

Nuclear Engine System Simulation (NESS). Version 2.0: Program user's guide. Final Report

International Nuclear Information System (INIS)

Pelaccio, D.G.; Scheil, C.M.; Petrosky, L.

1993-03-01

This Program User's Guide discusses the Nuclear Thermal Propulsion (NTP) engine system design features and capabilities modeled in the Nuclear Engine System Simulation (NESS): Version 2.0 program (referred to as NESS throughout the remainder of this document), as well as its operation. NESS was upgraded to include many new modeling capabilities not available in the original version delivered to NASA LeRC in Dec. 1991, NESS's new features include the following: (1) an improved input format; (2) an advanced solid-core NERVA-type reactor system model (ENABLER 2); (3) a bleed-cycle engine system option; (4) an axial-turbopump design option; (5) an automated pump-out turbopump assembly sizing option; (6) an off-design gas generator engine cycle design option; (7) updated hydrogen properties; (8) an improved output formnd (9) personal computer operation capability. Sample design cases are presented in the user's guide that demonstrate many of the new features associated with this upgraded version of NESS, as well as design modeling features associated with the original version of NESS

Users' guide for a personal-computer-based nuclear power plant fire data base

International Nuclear Information System (INIS)

Wheelis, W.T.

1986-08-01

The Nuclear Power Plant Fire Data Base has been developed for use with an IBM XT (or with a compatible system). Nuclear power plant fire data is located in many diverse references, making it both costly and time-consuming to obtain. The purpose of this Fire Data Base is to collect and to make easily accessible nuclear power plant fire data. This users' guide discusses in depth the specific features and capabilities of the various options found in the data base. Capabilities include the ability to search several database fields simultaneously to meet user-defined conditions, display basic plant information, and determine the operating experience (in years) for several nuclear power plant locations. Step-by-step examples are included for each option to allow the user to learn how to access the data

Radiation effects on electronic equipment: a designers'/users' guide for the nuclear power industry

International Nuclear Information System (INIS)

Sharp, R.E.; Garlick, D.R.

1994-01-01

The Designers'/Users' Guide to the effects of radiation on electronics is published by the Radiation Testing Service of AEA Technology. The aim of the Guide is to document the available information that we have generated and collected over some ten years whilst operating as a radiation effects and design consultancy to the nuclear power industry. We hope that this will enable workers within the industry better to understand the likely effects of radiation on the system or plant being designed and so minimise the problems that can arise. (Author)

NODC Standard Product: International ocean atlas Volume 11 - Climatic atlas of the Sea of Azov 2008 (1 disc set) (NODC Accession 0098574)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This Atlas, Climatic Atlas of the Sea of Azov 2008 on CD-ROM, is an update to Volume 10, Climatic Atlas of the Sea of Azov 2006 on CD-ROM (NODC Accession 0098572),...

DESI-Detection of early-season invasives (software-installation manual and user's guide version 1.0)

Science.gov (United States)

Kokaly, Raymond F.

2011-01-01

This report describes a software system for detecting early-season invasive plant species, such as cheatgrass. The report includes instructions for installing the software and serves as a user's guide in processing Landsat satellite remote sensing data to map the distributions of cheatgrass and other early-season invasive plants. The software was developed for application to the semi-arid regions of southern Utah; however, the detection parameters can be altered by the user for application to other areas.

MERBoard User's Guide

Science.gov (United States)

Trimble, Jay; Shab, Ted; Vera, Alonso; Gaswiller, Rich; Clancy, Daniel (Technical Monitor)

2002-01-01

An important goal of MERBoard is to allow users to quickly and easily share information. The front-end interface is physically a large plasma computer display with a touch screen, allowing multiple people to interact shoulder-to-shoulder or in a small meeting area. The software system allows people to interactively create digital whiteboards, browse the web, give presentations and connect to personal computers (for example, to run applications not on the MERBoard computer itself). There are four major integrated applications: a browser; a remote connection to another computer (VNC); a digital whiteboard; and a digital space (MERSpace), which is a digital repository for each individual user.

Jobs and Economic Development Impact (JEDI) Model: Offshore Wind User Reference Guide

Energy Technology Data Exchange (ETDEWEB)

Lantz, E.; Goldberg, M.; Keyser, D.

2013-06-01

The Offshore Wind Jobs and Economic Development Impact (JEDI) model, developed by NREL and MRG & Associates, is a spreadsheet based input-output tool. JEDI is meant to be a user friendly and transparent tool to estimate potential economic impacts supported by the development and operation of offshore wind projects. This guide describes how to use the model as well as technical information such as methodology, limitations, and data sources.

Disk Operating System User's Guide

Science.gov (United States)

1972-05-01

This document serves the purpose of bringing together in one place most of the information a user needs to use the DDP-516 Disk Operating System, (DOS). DOS is a core resident, one user, console-oriented operating system which allows the user to cont...

NODC Standard Format Marine Birds from Coastal Alaska and Puget Sound Data (1975-1980): Marine Bird Sighting, Land Census (F034) (NODC Accession 0014156)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Standard Marine Bird Sighting, Land Census (F034) is one of a group of seven datasets related to Marine Birds from Coastal Alaska and Puget Sound Data (1975...

National Synchrotron Light Source user's manual: Guide to the VUV and x-ray beamlines

International Nuclear Information System (INIS)

Gmuer, N.F.

1993-04-01

The success of the National Synchrotron Light Source is based, in large part, on the size of the user community and the diversity of the scientific and technical disciplines represented by these users. As evidence of this success, the VUV Ring has just celebrated its 10th anniversary and the X-ray Ring will do the same in 1995. In order to enhance this success, the NSLS User's Manual: Guide to the VUV and X-Ray Beamlines - Fifth Edition, is being published. This Manual presents to the scientific community-at-large the current and projected architecture, capabilities and research programs of the various VUV and X-ray beamlines. Also detailed is the research and computer equipment a General User can expect to find and use at each beamline when working at the NSLS. The Manual is updated periodically in order to keep pace with the constant changes on these beamlines

U.S. TIMSS and PIRLS 2011 Technical Report and User's Guide. NCES 2013-046

Science.gov (United States)

Kastberg, David; Roey, Stephen; Ferraro, David; Lemanski, Nita; Erberber, Ebru

2013-01-01

The "U.S. TIMSS and PIRLS 2011 Technical Report and User's Guide" provides an overview of the design and implementation of the Trends in International Mathematics and Science Study (TIMSS) 2011 and the Progress in International Reading Literacy Study (PIRLS) 2011 in the United States and the nine participating benchmarking states:…

TEBASCO user's guide

International Nuclear Information System (INIS)

Pearlstein, L.D.; Kaiser, T.B.; LoDestro, L.; Maron, N.; Nevins, W.M.; Willmann, P.A.

1983-01-01

TEBASCO is a Tandem mirror Equilibrium and BAllooning Stability COde. TEBASCO allows you to compute tandem-mirror MHD equilibria and to analyze both the flute-averaged and ballooning-mode stability of these equilibria. This stability analysis is directed toward the computation of marginal stability boundaries. Users of TEBASCO require a binary output file from the EFFI code which describes the vacuum magnetic field. In making this EFFI file the user will have defined a system of units for lengths (e.g., meters) and magnetic field (e.g., Tesla). In TEBASCO, all magnetic field strengths are normalized to the vacuum center-cell midplane value, and times are defined in units of the time for an Alfven wave in this field to transit one EFFI unit of length

Waste treatability guidance program. User's guide. Revision 0

International Nuclear Information System (INIS)

Toth, C.

1995-01-01

DOE sites across the country generate and manage radioactive, hazardous, mixed, and sanitary wastes. It is necessary for each site to find the technologies and associated capacities required to manage its waste. One role of DOE HQ Office of Environmental Restoration and Waste Management is to facilitate the integration of the site- specific plans into coherent national plans. DOE has developed a standard methodology for defining and categorizing waste streams into treatability groups based on characteristic parameters that influence waste management technology needs. This Waste Treatability Guidance Program automates the Guidance Document for the categorization of waste information into treatability groups; this application provides a consistent implementation of the methodology across the National TRU Program. This User's Guide provides instructions on how to use the program, including installations instructions and program operation. This document satisfies the requirements of the Software Quality Assurance Plan

WASP (Wavelet Analysis of Secondary Particles Angular Distributions) Package. Version 1.2. Long Write Up and User's Guide

CERN Document Server

Altaisky, M V; Soloviev, A G; Stadnik, A V; Shitov, A B

2001-01-01

WASP package is a C++ program aimed to analyze angular distributions of secondary particles generated in nuclear interactions. WASP package is based on wavelet transform algorithms. This work includes the user's guide, description of algorithms and mathematical methods, graphical user interface. We have also analyzed what problems of nuclear physics can be tackled with WASP.

Observing the user experience a practitioner's guide to user research

CERN Document Server

Kuniavsky, Mike; Goodman, Elizabeth

2012-01-01

The gap between who designers and developers imagine their users are, and who those users really are can be the biggest problem with product development. Observing the User Experience will help you bridge that gap to understand what your users want and need from your product, and whether they'll be able to use what you've created. Filled with real-world experience and a wealth of practical information, this book presents a complete toolbox of techniques to help designers and developers see through the eyes of their users. It provides in-depth coverage of 13 user experience research techniques

NASIS data base management system: IBM 360 TSS implementation. Volume 8: Data base administrator user's guide

Science.gov (United States)

1973-01-01

The Data Base Administrator User's Guide for the NASA Aerospace Safety Information System is presented. The subjects discussed are: (1) multi-terminal tasking, (2) data base executive, (3) utilities, (4) maintenance, (5) terminal support, and (6) retrieval subsystem.

Temperature, salinity, and sound speed profile data from the US Naval Oceanographic Office (NAVOCEANO) Master Oceanographic Observation Data Set (MOODS), 2002 update (NODC Accession 0000768)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — In 2002, the US Naval Oceanographic Office (NAVOCEANO) submitted these data to NODC in accordance with a Memorandum of Agreement between NODC and NAVOCEANO to...

User's guide to the repository intrusion risk evaluation code INTRUDE

International Nuclear Information System (INIS)

Nancarrow, D.J.; Thorne, M.C.

1986-05-01

The report, commissioned by the Department of the Environment as part of its radioactive waste management research programme, constitutes the user's guide to the repository intrusion risk evaluation code INTRUDE. It provides an explanation of the mathematical basis of the code, the database used and the operation of the code. INTRUDE is designed to facilitate the estimation of individual risks arising from the possibility of intrusion into shallow land burial facilities for radioactive wastes. It considers a comprehensive inventory of up to 65 long-lived radionuclides and produces risk estimates for up to 20 modes of intrusion and up to 50 times of evaluation. (author)

Air Traffic Complexity Measurement Environment (ACME): Software User's Guide

Science.gov (United States)

1996-01-01

A user's guide for the Air Traffic Complexity Measurement Environment (ACME) software is presented. The ACME consists of two major components, a complexity analysis tool and user interface. The Complexity Analysis Tool (CAT) analyzes complexity off-line, producing data files which may be examined interactively via the Complexity Data Analysis Tool (CDAT). The Complexity Analysis Tool is composed of three independently executing processes that communicate via PVM (Parallel Virtual Machine) and Unix sockets. The Runtime Data Management and Control process (RUNDMC) extracts flight plan and track information from a SAR input file, and sends the information to GARP (Generate Aircraft Routes Process) and CAT (Complexity Analysis Task). GARP in turn generates aircraft trajectories, which are utilized by CAT to calculate sector complexity. CAT writes flight plan, track and complexity data to an output file, which can be examined interactively. The Complexity Data Analysis Tool (CDAT) provides an interactive graphic environment for examining the complexity data produced by the Complexity Analysis Tool (CAT). CDAT can also play back track data extracted from System Analysis Recording (SAR) tapes. The CDAT user interface consists of a primary window, a controls window, and miscellaneous pop-ups. Aircraft track and position data is displayed in the main viewing area of the primary window. The controls window contains miscellaneous control and display items. Complexity data is displayed in pop-up windows. CDAT plays back sector complexity and aircraft track and position data as a function of time. Controls are provided to start and stop playback, adjust the playback rate, and reposition the display to a specified time.

User guide to the SRS data logging facility

International Nuclear Information System (INIS)

Tyson, B.E.

1979-02-01

The state of the SRS is recorded every two minutes, thus providing a detailed History of its parameters. Recording of History is done via the SRS Computer Network. This consists of a Master Computer, an Interdata 7/32, and three Minicomputers, Interdata 7/16s. Each of the Minicomputers controls one of the accelerators, Linac, Booster and Storage Ring. The Master Computer is connected to the Central Computer, an IBM 370/165, for jobs where greater computing power and storage are required. The Master Computer has a total of 20 Megabytes of fixed and movable disc space but only about 5 Megabytes are available for History storage. The Minicomputers have no storage facilities. The user guide is set out as follows: History filing system, History storage on the Master Computer, transfer of the History to the Central Computer, transferring History to tapes, job integrity, the SRS tape catalogue system. (author)

Test and control computer user's guide for a digital beam former test system

Science.gov (United States)

Alexovich, Robert E.; Mallasch, Paul G.

1992-01-01

A Digital Beam Former Test System was developed to determine the effects of noise, interferers and distortions, and digital implementations of beam forming as applied to the Tracking and Data Relay Satellite 2 (TDRS 2) architectures. The investigation of digital beam forming with application to TDRS 2 architectures, as described in TDRS 2 advanced concept design studies, was conducted by the NASA/Lewis Research Center for NASA/Goddard Space Flight Center. A Test and Control Computer (TCC) was used as the main controlling element of the digital Beam Former Test System. The Test and Control Computer User's Guide for a Digital Beam Former Test System provides an organized description of the Digital Beam Former Test System commands. It is written for users who wish to conduct tests of the Digital Beam forming Test processor using the TCC. The document describes the function, use, and syntax of the TCC commands available to the user while summarizing and demonstrating the use of the commands wtihin DOS batch files.

National Synchrotron Light Source users manual: Guide to the VUV and x-ray beam lines

International Nuclear Information System (INIS)

Gmuer, N.F.; White-DePace, S.M.

1987-08-01

The success of the National Synchrotron Light Source in the years to come will be based, in large part, on the size of the users community and the diversity of the scientific disciplines represented by these users. In order to promote this philosophy, this National Synchrotron Light Source (NSLS) Users Manual: Guide to the VUV and X-Ray Beam Lines, has been published. This manual serves a number of purposes. In an effort to attract new research, it will present to the scientific community-at-large the current and projected architecture and capabilities of the various VUV and x-ray beam lines and storage rings. We anticipate that this publication will be updated periodically in order to keep pace with the constant changes at the NSLS

Cart-Ball User's Guide

DEFF Research Database (Denmark)

Kvaran, H.; Jantzen, Jan

1998-01-01

This document is a user manual for the Pendulum simulation software used in an Internet course on fuzzy control, taught at the Technical University of Denmark. It contains installation instructions, a brief description of the software, and how to use it.......This document is a user manual for the Pendulum simulation software used in an Internet course on fuzzy control, taught at the Technical University of Denmark. It contains installation instructions, a brief description of the software, and how to use it....

Drush User's Guide

CERN Document Server

Requena, Juan Pablo Novillo

2012-01-01

A practical guide full of examples and step-by-step instructions to start using Drush right from chapter 1. Drupal developers or themers who understand Drupal administration's basic concepts. Drush can make building any kind of website quicker and easier, no matter if it is a development environment, beta, a simple blog or a complex system.

NASIS data base management system - IBM 360/370 OS MVT implementation. 7: Data base administrator user's guide

Science.gov (United States)

1973-01-01

The Data Base Administrator User's Guide for the NASA Aerospace Safety information system is presented. The subjects discussed are: (1) multi-terminal tasking, (2) data base executive, (3) utilities, (4) maintenance, and (5) update mode functions.

TIMSS 2011 User Guide for the International Database. Supplement 2: National Adaptations of International Background Questionnaires

Science.gov (United States)

Foy, Pierre, Ed.; Arora, Alka, Ed.; Stanco, Gabrielle M., Ed.

2013-01-01

This supplement describes national adaptations made to the international version of the TIMSS 2011 background questionnaires. This information provides users with a guide to evaluate the availability of internationally comparable data for use in secondary analyses involving the TIMSS 2011 background variables. Background questionnaire adaptations…

Interactive Rapid Dose Assessment Model (IRDAM): user's guide

International Nuclear Information System (INIS)

Poeton, R.W.; Moeller, M.P.; Laughlin, G.J.; Desrosiers, A.E.

1983-05-01

As part of the continuing emphasis on emergency preparedness the US Nuclear Regulatory Commission (NRC) sponsored the development of a rapid dose assessment system by Pacific Northwest Laboratory (PNL). This system, the Interactive Rapid Dose Assessment Model (IRDAM) is a micro-computer based program for rapidly assessing the radiological impact of accidents at nuclear power plants. This User's Guide provides instruction in the setup and operation of the equipment necessary to run IRDAM. Instructions are also given on how to load the magnetic disks and access the interactive part of the program. Two other companion volumes to this one provide additional information on IRDAM. Reactor Accident Assessment Methods (NUREG/CR-3012, Volume 2) describes the technical bases for IRDAM including methods, models and assumptions used in calculations. Scenarios for Comparing Dose Assessment Models (NUREG/CR-3012, Volume 3) provides the results of calculations made by IRDAM and other models for specific accident scenarios

User's guide to data obtained by the Aerospace Corporation energetic particle spectrometer on ATS-6

International Nuclear Information System (INIS)

Paulikas, G.A.; Hilton, H.H.

1977-01-01

Descriptions of the energetic particle detector are offered with calibration data, as part of a user's guide to the data obtained by ATS 6. Information on instrumental and operational anomalies and a description of the procedures used to reduce the data are also presented, along with a description of the format of the data

Scheduling language and algorithm development study. Volume 2, phase 2: Introduction to plans programming. [user guide

Science.gov (United States)

Cochran, D. R.; Ishikawa, M. K.; Paulson, R. E.; Ramsey, H. R.

1975-01-01

A user guide for the Programming Language for Allocation and Network Scheduling (PLANS) is presented. Information is included for the construction of PLANS programs. The basic philosophy of PLANS is discussed, and access and update reference techniques are described along with the use of tree structures.

METEOR v1.0 - User's Guide; METEOR v1.0 - Guia de Usuarios

Energy Technology Data Exchange (ETDEWEB)

Palomo, E.

1994-07-01

This script is a User's Guide for the software package METEOR for statistical analysis of meteorological data series. The original version of METEOR have been developed by Ph.D. Elena Palomo, CIEMAT-IER, GIMASE. It is built by linking programs and routines written in FORTRAN 77 and it adds the graphical capabilities of GNUPLOT. The shape of this toolbox was designed following the criteria of modularity, flexibility and agility criteria. All the input, output and analysis options are structured in three main menus: i) the first is aimed to evaluate the quality of the data set; ii) the second is aimed for pre-processing of the data; and iii) the third is aimed towards the statistical analyses and for creating the graphical outputs. Actually the information about METEOR is constituted by three documents written in spanish: 1) METEOR v1.0: User's guide; 2) METEOR v1.0: A usage example; 3) METEOR v1.0: Design and structure of the software package. (Author)

Wind-US Users Guide Version 3.0

Science.gov (United States)

Yoder, Dennis A.

2016-01-01

Wind-US is a computational platform which may be used to numerically solve various sets of equations governing physical phenomena. Currently, the code supports the solution of the Euler and Navier-Stokes equations of fluid mechanics, along with supporting equation sets governing turbulent and chemically reacting flows. Wind-US is a product of the NPARC Alliance, a partnership between the NASA Glenn Research Center (GRC) and the Arnold Engineering Development Complex (AEDC) dedicated to the establishment of a national, applications-oriented flow simulation capability. The Boeing Company has also been closely associated with the Alliance since its inception, and represents the interests of the NPARC User's Association. The "Wind-US User's Guide" describes the operation and use of Wind-US, including: a basic tutorial; the physical and numerical models that are used; the boundary conditions; monitoring convergence; the files that are read and/or written; parallel execution; and a complete list of input keywords and test options. For current information about Wind-US and the NPARC Alliance, please see the Wind-US home page at http://www.grc.nasa.gov/WWW/winddocs/ and the NPARC Alliance home page at http://www.grc.nasa.gov/WWW/wind/. This manual describes the operation and use of Wind-US, a computational platform which may be used to numerically solve various sets of equations governing physical phenomena. Wind-US represents a merger of the capabilities of four CFD codes - NASTD (a structured grid flow solver developed at McDonnell Douglas, now part of Boeing), NPARC (the original NPARC Alliance structured grid flow solver), NXAIR (an AEDC structured grid code used primarily for store separation analysis), and ICAT (an unstructured grid flow solver developed at the Rockwell Science Center and Boeing).

NASA AVOSS Fast-Time Wake Prediction Models: User's Guide

Science.gov (United States)

Ahmad, Nash'at N.; VanValkenburg, Randal L.; Pruis, Matthew

2014-01-01

The National Aeronautics and Space Administration (NASA) is developing and testing fast-time wake transport and decay models to safely enhance the capacity of the National Airspace System (NAS). The fast-time wake models are empirical algorithms used for real-time predictions of wake transport and decay based on aircraft parameters and ambient weather conditions. The aircraft dependent parameters include the initial vortex descent velocity and the vortex pair separation distance. The atmospheric initial conditions include vertical profiles of temperature or potential temperature, eddy dissipation rate, and crosswind. The current distribution includes the latest versions of the APA (3.4) and the TDP (2.1) models. This User's Guide provides detailed information on the model inputs, file formats, and the model output. An example of a model run and a brief description of the Memphis 1995 Wake Vortex Dataset is also provided.

Powernext futuresTM back office user's guide

International Nuclear Information System (INIS)

2005-05-01

The introduction of a power exchange in France is a direct response to the opening up of the European electricity markets. Powernext SA is a Multilateral Trading Facility in charge of managing the French power exchange through an optional and anonymous organised exchange offering: - Day-ahead contracts for the management of volume risk on Powernext Day-Ahead TM since 21 November 2001, - Medium term contracts for the management of price risk on Powernext Futures TM since 18 June 2004. This document is the back office user's guide, it presents: the market model (specifications, regulation, legal framework), the members (traders, clearers, quotation providers, fees structure), the products (specifications, use, liquidity and market efficiency), the clearing (recording transactions, risk management before delivery period, last settlement of contracts, risk management during delivery, additional margin, examples, default management), the LCH.Clearnet Ltd clearing system (hardware and software requirements, setup of the VPN client software, functionalities, market information disclosure), the delivery (nomination, file characteristics and transmission), the payment (financial flows, eligible assets provided to cover margin requirements). ECS reports, treasury documents, contracts codification, FTP server arborescence, latent and carried-out margins and a glossary are given in the appendix. (J.S.)

CONSUME: users guide.

Science.gov (United States)

R.D. Ottmar; M.F. Burns; J.N. Hall; A.D. Hanson

1993-01-01

CONSUME is a user-friendly computer program designed for resource managers with some working knowledge of IBM-PC applications. The software predicts the amount of fuel consumption on logged units based on weather data, the amount and fuel moisture of fuels, and a number of other factors. Using these predictions, the resource manager can accurately determine when and...

Digital radiography: description and user's guide

Energy Technology Data Exchange (ETDEWEB)

Berthel, A. [Cryospace, 78 - Les Mureaux (France); Bonin, Th. [CEA Valduc, 21 - Is-sur-Tille (France); Cadilhon, S.; Thiery, Ch. [CEA Bruyeres-le-Chatel, 91 (France); Chatellier, L. [Electricite de France (EDF-RD), Recherche et Developpement, 78 - Chatou (France); Kaftandjian, V. [Lyon Univ., INSA Lab. Controle Non Destructif par Rayonnements Ionisants (CNDRI), 69 (France); Honorat, Ph.; Torrent, J. [SNECMA, 75 - Paris (France); Le Brun, A. [Electricite de France, 78 - Chatou (France); Maglaive, J.C. [Euromev, 78 - Buc (France); Moreau, Ph. [General Electric Industrial Inspection Technologies, 69 - Limonest (France); Pettier, J.L. [CEA Cadarach, Dir. de l' Energie Nucleaire, 13 - Saint Paul lez Durance (France); Rebuffel, V. [CEA Grenoble, Lab. d' Electronique et de Technologie de l' Informatique (LETI), 38 (France); Roenelle, P. [Centre d' Etudes Techniques de l' Equipement, 69 - Bron Lyon (France); Roussilhe, J. [Carestream Health France SA, 71 - Chalon/Saone (France); Staat, St.; Tahon, M. [Cegelec, 91 - Bretigny sur Orge (France)

2007-07-01

The presented document arises from the work of the group 'Digital Radiography and sensors' of COFREND. It is a collective work of synthesis aimed to analyze the quality parameters of digital images influencing the answer and the diagnosis brought to a given industrial problem. Five families of digital sensors have been studied: 1. Image Intensifier coupled with CCD devices - 2. scintillators coupled with a CCD device- 3. Flat Panels with indirect conversion - 4. Flat Panels with direct electric conversion - 5. Photostimulable Storage Phosphor Screens). In particular, concerning a complete imaging chain, it deals with the notions of magnification, blur (unsharpness) (geometrical, kinetic or internal to the very sensor), noises, scattered radiation, spatial resolution, which is different from the one of analog detectors such as films, Contrast to Noise Ratio (CNR), sensitivity using IQIs, dynamic range, detection quantum efficiency, persistence and temporal resolution. This document is not a standard; it must be understood as a user's guide, and it approaches some essentials corrections to bring to a sensor in order to optimize his efficiency without losing information during the pre-processing phase in the radiographic acquisition. It also introduces some image processing tools commonly used. It can be used as a source document to the future elaboration of a standardisation document. It augurs not at all of the choice of a digital sensor with regard to the traditional radiographic film, but gives bases of reflection to a radio user for a sensible transfer from the classic radiography to the digital radiography. (authors)

Broadband Fan Noise Prediction System for Turbofan Engines. Volume 2; BFaNS User's Manual and Developer's Guide

Science.gov (United States)

Morin, Bruce L.

2010-01-01

Pratt & Whitney has developed a Broadband Fan Noise Prediction System (BFaNS) for turbofan engines. This system computes the noise generated by turbulence impinging on the leading edges of the fan and fan exit guide vane, and noise generated by boundary-layer turbulence passing over the fan trailing edge. BFaNS has been validated on three fan rigs that were tested during the NASA Advanced Subsonic Technology Program (AST). The predicted noise spectra agreed well with measured data. The predicted effects of fan speed, vane count, and vane sweep also agreed well with measurements. The noise prediction system consists of two computer programs: Setup_BFaNS and BFaNS. Setup_BFaNS converts user-specified geometry and flow-field information into a BFaNS input file. From this input file, BFaNS computes the inlet and aft broadband sound power spectra generated by the fan and FEGV. The output file from BFaNS contains the inlet, aft and total sound power spectra from each noise source. This report is the second volume of a three-volume set documenting the Broadband Fan Noise Prediction System: Volume 1: Setup_BFaNS User s Manual and Developer s Guide; Volume 2: BFaNS User s Manual and Developer s Guide; and Volume 3: Validation and Test Cases. The present volume begins with an overview of the Broadband Fan Noise Prediction System, followed by step-by-step instructions for installing and running BFaNS. It concludes with technical documentation of the BFaNS computer program.

An Integrated User Interface Style Guide for the ESF-CCS, RPS and CPCS display design

International Nuclear Information System (INIS)

Park, Jae Kyu; Lee, Hyun Chul; Hwang, Seong Hwan; Jang, Tong Il; Kang, Suk Ho; Lee, Jung Woon; Lee, Yong Hee

2009-01-01

The human machine interface (HMI) design process is important to enhance the safety and reliability of a Nuclear Power Plant (NPP) operation. Various MMI activities are achieved with progress of MMI and environment of NPP. These activities are impossible to utilize when upgrade of environment because most of these activities emphasize hardware aspect. Also, the human factors guidelines mostly describe the human factors principles so the designer has to adapt them to apply them to his design. The design-specific guideline that is specially dedicated to a unique system and derived from the general guidelines is called style guide. The style guide provides easy to use templates to help the user interface design, and these templates help ensure a consistent look and behavior throughout the design products. However, it could be difficult for a designer to select the human factors guideline items related to a target system and to derive a style guide from the items. This paper describes human factors activities carried out to develop a style guide for the ESF-CCS, RPS and CPCS system

PREDICTING ATTENUATION OF VIRUSES DURING PERCOLATION IN SOILS: 2. USER'S GUIDE TO THE VIRULO 1.0 COMPUTER MODEL

Science.gov (United States)

In the EPA document Predicting Attenuation of Viruses During Percolation in Soils 1. Probabilistic Model the conceptual, theoretical, and mathematical foundations for a predictive screening model were presented. In this current volume we present a User's Guide for the computer mo...

Pollution Prevention Successes Database (P2SDb) user guide

International Nuclear Information System (INIS)

1995-07-01

When Pollution Prevention Opportunity Assessments (P2OAs) were launched at the Hanford Site during the summer of 1994, the first comment received from those using them expressed the desire for a method to report assessments electronically. As a temporary measure, macros were developed for use on word processing systems, but a more formal database was obviously needed. Additionally, increased DOE and Washington state reporting requirements for pollution prevention suggested that a database system would streamline the reporting process. The Pollution Prevention Group of Westinghouse Hanford Company (WHC) contracted with the Data Automation Engineering Department from ICF Kaiser Hanford Company (ICFKH) to develop the system. The scope was to develop a database that will track P2OAs conducted by the facilities and contractors at the Hanford Site. It will also track pollution prevention accomplishments that are not the result of P2OAs and document a portion of the Process Waste Assessments conducted in the past. To accommodate the above criteria, yet complete the system in a timely manner, the Pollution Prevention Successes Database (P2SDb) is being implemented in three phases. The first phase will automate the worksheets to provide both input and output of the data associated with the worksheets. The second phase will automate standard summary reports and ad hoc reports. The third phase will provide automated searching of the database to facilitate the sharing of pollution prevention experiences among various users. This User's Guide addresses only the Phase 1 system

EAACI Molecular Allergology User's Guide.

Science.gov (United States)

Matricardi, P M; Kleine-Tebbe, J; Hoffmann, H J; Valenta, R; Hilger, C; Hofmaier, S; Aalberse, R C; Agache, I; Asero, R; Ballmer-Weber, B; Barber, D; Beyer, K; Biedermann, T; Bilò, M B; Blank, S; Bohle, B; Bosshard, P P; Breiteneder, H; Brough, H A; Caraballo, L; Caubet, J C; Crameri, R; Davies, J M; Douladiris, N; Ebisawa, M; EIgenmann, P A; Fernandez-Rivas, M; Ferreira, F; Gadermaier, G; Glatz, M; Hamilton, R G; Hawranek, T; Hellings, P; Hoffmann-Sommergruber, K; Jakob, T; Jappe, U; Jutel, M; Kamath, S D; Knol, E F; Korosec, P; Kuehn, A; Lack, G; Lopata, A L; Mäkelä, M; Morisset, M; Niederberger, V; Nowak-Węgrzyn, A H; Papadopoulos, N G; Pastorello, E A; Pauli, G; Platts-Mills, T; Posa, D; Poulsen, L K; Raulf, M; Sastre, J; Scala, E; Schmid, J M; Schmid-Grendelmeier, P; van Hage, M; van Ree, R; Vieths, S; Weber, R; Wickman, M; Muraro, A; Ollert, M

2016-05-01

The availability of allergen molecules ('components') from several protein families has advanced our understanding of immunoglobulin E (IgE)-mediated responses and enabled 'component-resolved diagnosis' (CRD). The European Academy of Allergy and Clinical Immunology (EAACI) Molecular Allergology User's Guide (MAUG) provides comprehensive information on important allergens and describes the diagnostic options using CRD. Part A of the EAACI MAUG introduces allergen molecules, families, composition of extracts, databases, and diagnostic IgE, skin, and basophil tests. Singleplex and multiplex IgE assays with components improve both sensitivity for low-abundance allergens and analytical specificity; IgE to individual allergens can yield information on clinical risks and distinguish cross-reactivity from true primary sensitization. Part B discusses the clinical and molecular aspects of IgE-mediated allergies to foods (including nuts, seeds, legumes, fruits, vegetables, cereal grains, milk, egg, meat, fish, and shellfish), inhalants (pollen, mold spores, mites, and animal dander), and Hymenoptera venom. Diagnostic algorithms and short case histories provide useful information for the clinical workup of allergic individuals targeted for CRD. Part C covers protein families containing ubiquitous, highly cross-reactive panallergens from plant (lipid transfer proteins, polcalcins, PR-10, profilins) and animal sources (lipocalins, parvalbumins, serum albumins, tropomyosins) and explains their diagnostic and clinical utility. Part D lists 100 important allergen molecules. In conclusion, IgE-mediated reactions and allergic diseases, including allergic rhinoconjunctivitis, asthma, food reactions, and insect sting reactions, are discussed from a novel molecular perspective. The EAACI MAUG documents the rapid progression of molecular allergology from basic research to its integration into clinical practice, a quantum leap in the management of allergic patients. © 2016 John Wiley

User's guide of DETRAS system-2. Setup of DETRAS system and its startup

International Nuclear Information System (INIS)

Yamaguchi, Yukichi

2007-01-01

DETRAS system is a PWR reactor simulator system for operation training whose distinguished feature is that it can be operated from the remote place of the simulator site. The document which is the second one of a series of three volumes of the user's guide of DETRAS describes a startup procedure of the DETRAS system over the simulator area, the local network involving the simulator and then gives explanation about the procedure of remote access for startup and shutdown of the simulator outside of the simulator area. (author)

Broadband Fan Noise Prediction System for Turbofan Engines. Volume 1; Setup_BFaNS User's Manual and Developer's Guide

Science.gov (United States)

Morin, Bruce L.

2010-01-01

Pratt & Whitney has developed a Broadband Fan Noise Prediction System (BFaNS) for turbofan engines. This system computes the noise generated by turbulence impinging on the leading edges of the fan and fan exit guide vane, and noise generated by boundary-layer turbulence passing over the fan trailing edge. BFaNS has been validated on three fan rigs that were tested during the NASA Advanced Subsonic Technology Program (AST). The predicted noise spectra agreed well with measured data. The predicted effects of fan speed, vane count, and vane sweep also agreed well with measurements. The noise prediction system consists of two computer programs: Setup_BFaNS and BFaNS. Setup_BFaNS converts user-specified geometry and flow-field information into a BFaNS input file. From this input file, BFaNS computes the inlet and aft broadband sound power spectra generated by the fan and FEGV. The output file from BFaNS contains the inlet, aft and total sound power spectra from each noise source. This report is the first volume of a three-volume set documenting the Broadband Fan Noise Prediction System: Volume 1: Setup_BFaNS User s Manual and Developer s Guide; Volume 2: BFaNS User's Manual and Developer s Guide; and Volume 3: Validation and Test Cases. The present volume begins with an overview of the Broadband Fan Noise Prediction System, followed by step-by-step instructions for installing and running Setup_BFaNS. It concludes with technical documentation of the Setup_BFaNS computer program.

FACSIM/MRS-1: Cask receiving and consolidation model documentation and user's guide

International Nuclear Information System (INIS)

Lotz, T.L.; Shay, M.R.

1987-06-01

The Pacific Northwest Laboratory (PNL) has developed a stochastic computer model, FACSIM/MRS, to assist in assessing the operational performance of the Monitored Retrievable Storage (MRS) waste-handling facility. This report provides the documentation and user's guide for the component FACSIM/MRS-1, which is also referred to as the front-end model. The FACSIM/MRS-1 model simulates the MRS cask-receiving and spent-fuel consolidation activities. The results of the assessment of the operational performance of these activities are contained in a second report, FACSIM/MRS-1: Cask Receiving and Consolidation Performance Assessment (Lotz and Shay 1987). The model of MRS canister storage and shipping operations is presented in FACSIM/MRS-2: Storage and Shipping Model Documentation and User's Guide (Huber et al. 1987). The FACSIM/MRS model uses the commercially available FORTRAN-based SIMAN (SIMulation ANalysis language) simulation package (Pegden 1982). SIMAN provides a set of FORTRAN-coded commands, called block operations, which are used to build detailed models of continuous or discrete events that make up the operations of any process, such as the operation of an MRS facility. The FACSIM models were designed to run on either an IBM-PC or a VAX minicomputer. The FACSIM/MRS-1 model is flexible enough to collect statistics concerning almost any aspect of the cask receiving and consolidation operations of an MRS facility. The MRS model presently collects statistics on 51 quantities of interest during the simulation. SIMAN reports the statistics with two forms of output: a SIMAN simulation summary and an optional set of SIMAN output files containing data for use by more detailed post processors and report generators

A Brief User's Guide to the Excel^® -Based DF Calculator

Energy Technology Data Exchange (ETDEWEB)

Jubin, Robert Thomas [ORNL

2016-06-01

To understand the importance of capturing penetrating forms of iodine as well as the other volatile radionuclides, a calculation tool was developed in the form of an Excel^® spreadsheet to estimate the overall plant decontamination factor (DF). The tool requires the user to estimate splits of the volatile radionuclides within the major portions of the reprocessing plant, speciation of iodine and individual DFs for each off-gas stream within the Used Nuclear Fuel reprocessing plant. The Impact to the overall plant DF for each volatile radionuclide is then calculated by the tool based on the specific user choices. The Excel^® spreadsheet tracks both elemental and penetrating forms of iodine separately and allows changes in the speciation of iodine at each processing step. It also tracks ³H, ¹⁴C and ⁸⁵Kr. This document provides a basic user's guide to the manipulation of this tool.

A User's Guide for the Fabulous Abacus.

Science.gov (United States)

Hausrath, Alan R.

A guide for using an abacus is accompanied by a heavy-duty paper abacus. The guide includes instruction in how to represent numbers on an abacus as well as in place value, addition, carrying, subtraction, and borrowing. Diagrams are used throughout the guide and a brief English-Spanish vocabulary list specific to the use of the abacus is included.…

Users guide for NRC145-2 accident assessment computer code

International Nuclear Information System (INIS)

Pendergast, M.M.

1982-08-01

An accident assessment computer code has been developed for use at the Savannah River Plant. This computer code is based upon NRC Regulatory Guide 1.145 which provides guidence for accident assessements for power reactors. The code contains many options so that the user may utilize the code for many different assessments. For example the code can be used for non-nuclear assessments such as Sulpher Dioxide which may be required by the EPA. A discription of the code is contained in DP-1646. This document is a compilation of step-by-step instructions on how to use the code on the SRP IBM 3308 computer. This document consists of a number of tables which contain copies of computer listings. Some of the computer listings are copies of input; other listings give examples of computer output

User's guide for shipping Type B quantities of radioactive and fissile material, including plutonium, in DOT-6M specification packaging configurations

International Nuclear Information System (INIS)

Kelly, D.L.

1994-09-01

The need for developing a user's guide for shipping Type B quantities of radioactive and fissile material, including plutonium, in a US Department of Transportation Specification 6M (DOT-6M) packaging was identified by the US Department of Energy (DOE)-Headquarters, Transportation Management Division (EM-261) because the DOT-6M packaging is widely used by DOE site contractors and the DOE receives many questions about approved packaging configuration. Currently, EM-261 has the authority to approve new DOT-6M packaging configurations for use by the DOE Operations Offices. This user's guide identifies the DOE-approved DOT-6M packaging configurations and explains how to have new configurations approved by the DOE. The packaging configurations described in this guide are approved by the DOE, and satisfy the applicable DOT requirements and the identified DOE restrictions. These packaging configurations are acceptable for transport of Type B quantities of radioactive and fissile material, including plutonium

Do We Really Need to Catch Them All? A New User-Guided Social Media Crawling Method

Science.gov (United States)

Erlandsson, Fredrik; Bródka, Piotr; Boldt, Martin; Johnson, Henric

2017-12-01

With the growing use of popular social media services like Facebook and Twitter it is challenging to collect all content from the networks without access to the core infrastructure or paying for it. Thus, if all content cannot be collected one must consider which data are of most importance. In this work we present a novel User-guided Social Media Crawling method (USMC) that is able to collect data from social media, utilizing the wisdom of the crowd to decide the order in which user generated content should be collected to cover as many user interactions as possible. USMC is validated by crawling 160 public Facebook pages, containing content from 368 million users including 1.3 billion interactions, and it is compared with two other crawling methods. The results show that it is possible to cover approximately 75% of the interactions on a Facebook page by sampling just 20% of its posts, and at the same time reduce the crawling time by 53%. In addition, the social network constructed from the 20% sample contains more than 75% of the users and edges compared to the social network created from all posts, and it has similar degree distribution.

Emphasis/Nevada STDEM : user's guide : version 1.0.

Energy Technology Data Exchange (ETDEWEB)

Seidel, David Bruce; Coats, Rebecca Sue; Pasik, Michael Francis

2005-04-01

STDEM is the structured mesh time-domain electromagnetic and plasma physics component of Emphasis/Nevada. This report provides a guide on using STDEM. Emphasis, the electromagnetic physics analysis system, is a suite of codes for the simulation of electromagnetic and plasma physics phenomena. The time-dependent components of Emphasis have been implemented using the Nevada framework [1]. The notation Emphasis/Nevada is used to highlight this relationship and/or distinguish the time-dependent components of Emphasis. In theory the underlying framework should have little influence on the user's interaction with the application. In practice the framework tends to be more invasive as it provides key services such as input parsing and defines fundamental concepts and terminology. While the framework offers many technological advancements from a software development point of view, from a user's perspective the key benefits of the underlying framework are the common interface for all framework physics modules as well as the ability to perform coupled physics simulations. STDEM is the structured time-domain electromagnetic and plasma physics component of Emphasis/Nevada. STDEM provides for the full-wave solution to Maxwell's equations on multi-block three-dimensional structured grids using finite-difference time-domain (FDTD) algorithms. Additionally STDEM provides for the fully relativistic, self-consistent simulation of charged particles using particle-in-cell (PIC) algorithms.

Computer System for Monitoring Environmental Campaigns. User's Guide. Version 1.0

International Nuclear Information System (INIS)

Bailador, M.A.; Barcala, M.; Blanco, F.; Gonzalez, C.; Perez, J. M.; Sanchez, A.; Sanchez, E.; Willmot, C.

2012-01-01

CIEMAT has an environmental mobile unit to carry out the execution of environmental measures at diverse environments. During the last years, this unit has been involved in changes relative to its instrumentation, being necessary to developed an informatics system, SiSCA Informatics System for the monitoring of environmental campaigns, that is able to: Acquiring in a synchronized way the data from the environmental mobile unit instruments. Showing in a georrefential way these data by means of GIS technology. Transmitting in a secure way and in real time the data to a centralized data base repository This document is the user guide that picks up all the necessary information to use SiSCA when UMA environmental campaigns are carrying out. (Author)

VISION User Guide - VISION (Verifiable Fuel Cycle Simulation) Model

International Nuclear Information System (INIS)

Jacobson, Jacob J.; Jeffers, Robert F.; Matthern, Gretchen E.; Piet, Steven J.; Baker, Benjamin A.; Grimm, Joseph

2009-01-01

The purpose of this document is to provide a guide for using the current version of the Verifiable Fuel Cycle Simulation (VISION) model. This is a complex model with many parameters; the user is strongly encouraged to read this user guide before attempting to run the model. This model is an R and D work in progress and may contain errors and omissions. It is based upon numerous assumptions. This model is intended to assist in evaluating 'what if' scenarios and in comparing fuel, reactor, and fuel processing alternatives at a systems level for U.S. nuclear power. The model is not intended as a tool for process flow and design modeling of specific facilities nor for tracking individual units of fuel or other material through the system. The model is intended to examine the interactions among the components of a fuel system as a function of time varying system parameters; this model represents a dynamic rather than steady-state approximation of the nuclear fuel system. VISION models the nuclear cycle at the system level, not individual facilities, e.g., 'reactor types' not individual reactors and 'separation types' not individual separation plants. Natural uranium can be enriched, which produces enriched uranium, which goes into fuel fabrication, and depleted uranium (DU), which goes into storage. Fuel is transformed (transmuted) in reactors and then goes into a storage buffer. Used fuel can be pulled from storage into either separation of disposal. If sent to separations, fuel is transformed (partitioned) into fuel products, recovered uranium, and various categories of waste. Recycled material is stored until used by its assigned reactor type. Note that recovered uranium is itself often partitioned: some RU flows with recycled transuranic elements, some flows with wastes, and the rest is designated RU. RU comes out of storage if needed to correct the U/TRU ratio in new recycled fuel. Neither RU nor DU are designated as wastes. VISION is comprised of several Microsoft

Policy options evaluation tool for managed lanes (POET-ML) users guide and methodology description : Federal Highway Administration HOV lane performance

Science.gov (United States)

2008-12-01

Users guide for a sketch planning tool for exploring policy alternatives. It is intended for an audience of transportation professionals responsible for planning, designing, funding, operating, enforcing, monitoring, and managing HOV and HOT lanes...

Steerability Analysis of Tracked Vehicles: Theory and User’s Guide for Computer Program TVSTEER

Science.gov (United States)

1986-08-01

Baladi , Donald E. Barnes, Rebecca P. BergerC oStructures Laboratory NDEPARTMENT OF THE ARMY ___ Waterways Experiment Station, Corps of Engineers . U P0 Box...Analysis of Tracked Vehicles: Theory and User’s Guide for Computer Program TVSTEER - 12 PERSONAL AUTHOR(S) Baladi , George Y., Barnes, Donald E...mathematical model was formulated by Drs. George Y. Baladi and Behzad Rohani. The logic and computer programming were accomplished by Dr. Baladi and

A user's guide to the programs ITRAP-A, ITRAP-B, ITRAP-S and ITRAP-L

International Nuclear Information System (INIS)

Manley, A.J.

1979-03-01

The four programs ITRAP-A, ITRAP-B, ITRAP-S and ITRAP-L are designed to calculate parameters required for assessing the performance of iodine trapping plant installed in the ventilation systems of enclosures in which radioactive materials are handled. This guide sets out the input to and output from these programs for plant managers and gives sufficient program details to enable the users to assess the accuracy of the methods used. (author)

XTV users guide

International Nuclear Information System (INIS)

Dearing, J.F.; Johns, R.C.

1996-09-01

XTV is an X-Windows based Graphical User Interface for viewing results of Transient Reactor Analysis Code (TRAC) calculations. It provides static and animated color mapped visualizations of both thermal-hydraulic and heat conduction components in a TRAC model of a nuclear power plant, as well as both on-screen and hard copy two-dimensional plot capabilities. XTV is the successor to TRAP, the former TRAC postprocessor using the proprietary DISSPLA graphics library. This manual describes Version 2.0, which requires TRAC version 5.4.20 or later for full visualization capabilities

Physical and chemical properties of San Francisco Bay waters, 1969-1976 (NODC Accession 8400194)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — One magnetic tape containing the physical and chemical properties of San Francisco Bay waters was forwarded to NODC by Mr. Richard Smith of the U.S Geological Survey...

OSIRIS (the first step). A user guide

International Nuclear Information System (INIS)

Engberg, D.

1999-01-01

The OSIRIS Project will explore the instrumental horizons available with the cold neutrons from a pulsed source and especially the totally new avenues available to polarised neutrons on these sources. On pulsed sources, polarisation techniques offer great potential for high resolution studies, and only lack of opportunity has left the field unexploited. On OSIRIS, the fundamentally novel methods developed on IRIS will be combined with proven and extended neutron polarising techniques. The high flux available at ISIS, coupled to the advanced design of the OSIRIS guide, will provide the means to take this field to its next evolutionary stage. By exploiting the combination of sharp pulses, white beams and cold neutrons from ISIS, high resolution measurements, both dynamic and structural, can be carried out using both unpolarised and polarised neutrons. The OSIRIS Project is an international collaboration involving India, Italy, Spain, Sweden, Switzerland and the United Kingdom. The project has three well-defined phases; phase 1: Extraction of a second cold beam guide from the IRIS beam line; phase 2: large d-spacing powder diffraction, incident beam polarised powder diffraction; phase 3: high resolution spectroscopy, spectroscopy polarisation analysis, diffraction polarisation analysis. This is the user manual for the first step of the OSIRIS project, which means that phase 2 is now almost finished, i.e. we have a high resolution large d-spacing diffractometer, but the incident beam polarisation is as of yet only used for tests. You can find more information on the Osiris web-pages at . This document is also available in an html version at that address. This document is divided into five different parts. First, this short introduction, then what you need to think about before your arrive at ISIS, thereafter, the different parts of the instrument are described, together with some examples of sample environments. Fourthly, the actual running of an experiment is dealt

The NexStar evolution and SkyPortal user's guide

CERN Document Server

Chen, James L

2016-01-01

This book serves as a comprehensive guide for using a Nexstar Evolution mount with WiFi SkyPortal control, walking the reader through the process for aligning and operating the system from a tablet or smartphone. The next generation Go-To mount from Celestron, this is compatible not only with the Nextstar Evolution but also with older mounts. It is the ideal resource for anyone who owns, or is thinking of owning, a Nexstar Evolution telescope, or adapting their existing Celestron mount. Pros and cons of the system are thoroughly covered with a critical depth that addresses any possible question by users. Beginning with a brief history of Go-To telescopes and the genesis of this still new technology, the author covers every aspect of the newly expanding capability in observing. This includes the associated Sky Portal smartphone and tablet application, the transition from the original Nexstar GoTo system to the new SkyPortal system, the use of the Sky Portal application with its Sky Safari 4 basic software and ...

Do We Really Need to Catch Them All? A New User-Guided Social Media Crawling Method

Directory of Open Access Journals (Sweden)

Fredrik Erlandsson

2017-12-01

Full Text Available [-15]With the growing use of popular social media services like Facebook and Twitter it is challenging to collect all content from the networks without access to the core infrastructure or paying for it. Thus, if all content cannot be collected one must consider which data are of most importance. In this work we present a novel User-guided Social Media Crawling method (USMC that is able to collect data from social media, utilizing the wisdom of the crowd to decide the order in which user generated content should be collected to cover as many user interactions as possible. USMC is validated by crawling 160 public Facebook pages, containing content from 368 million users including 1.3 billion interactions, and it is compared with two other crawling methods. The results show that it is possible to cover approximately 75% of the interactions on a Facebook page by sampling just 20% of its posts, and at the same time reduce the crawling time by 53%. In addition, the social network constructed from the 20% sample contains more than 75% of the users and edges compared to the social network created from all posts, and it has similar degree distribution.

A Music-Related Quality of Life Measure to Guide Music Rehabilitation for Adult Cochlear Implant Users.

Science.gov (United States)

Dritsakis, Giorgos; van Besouw, Rachel M; Kitterick, Pádraig; Verschuur, Carl A

2017-09-18

A music-related quality of life (MuRQoL) questionnaire was developed for the evaluation of music rehabilitation for adult cochlear implant (CI) users. The present studies were aimed at refinement and validation. Twenty-four experts reviewed the MuRQoL items for face validity. A refined version was completed by 147 adult CI users, and psychometric techniques were used for item selection, assessment of reliability, and definition of the factor structure. The same participants completed the Short Form Health Survey for construct validation. MuRQoL responses from 68 CI users were compared with those of a matched group of adults with normal hearing. Eighteen items measuring music perception and engagement and 18 items measuring their importance were selected; they grouped together into 2 domains. The final questionnaire has high internal consistency and repeatability. Significant differences between CI users and adults with normal hearing and a correlation between music engagement and quality of life support construct validity. Scores of music perception and engagement and importance for the 18 items can be combined to assess the impact of music on the quality of life. The MuRQoL questionnaire is a reliable and valid measure of self-reported music perception, engagement, and their importance for adult CI users with potential to guide music aural rehabilitation.

Users guide for the ANL IBM SPx

Energy Technology Data Exchange (ETDEWEB)

Gropp, W.; Lusk, E.

1994-12-01

This guide presents the features of the IBM SPx installed in the Mathematics and Computer Science Division at Argonne National Laboratory. The guide describes the available hardware and software, access policies, and hints for using the system productively.

FACSIM/MRS [Monitored Retrievable Storage]-2: Storage and shipping model documentation and user's guide

International Nuclear Information System (INIS)

Huber, H.D.; Chockie, A.D.; Hostick, C.J.; Otis, P.T.; Sovers, R.A.

1987-06-01

The Pacific Northwest Laboratory (PNL) has developed a stochastic computer model, FACSIM/MRS, to assist in assessing the operational performance of the Monitored Retrievable Storage (MRS) waste-handling facility. This report provides the documentation and user's guide for FACSIM/MRS-2, which is also referred to as the back-end model. The FACSIM/MRS-2 model simulates the MRS storage and shipping operations, which include handling canistered spent fuel and secondary waste in the shielded canyon cells, in onsite yard storage, and in repository shipping cask loading areas

TEDS-M 2008 User Guide for the International Database. Supplement 2: National Adaptations of the TEDS-M Questionnaires

Science.gov (United States)

Brese, Falk, Ed.

2012-01-01

This supplement contains all adaptations made by countries to the international version of the TEDS-M questionnaires under careful supervision of and approval by the TEDS-M International Study Center at Michigan State University. This information provides users of the TEDS-M International Database with a guide to evaluate the availability of…

Human-system interface design review guideline -- Review software and user's guide: Final report. Revision 1, Volume 3

International Nuclear Information System (INIS)

1996-06-01

NUREG-0700, Revision 1, provides human factors engineering (HFE) guidance to the US Nuclear Regulatory Commission staff for its: (1) review of the human system interface (HSI) design submittals prepared by licensees or applications for a license or design certification of commercial nuclear power plants, and (2) performance of HSI reviews that could be undertaken as part of an inspection or other type of regulatory review involving HSI design or incidents involving human performance. The guidance consists of a review process and HFE guidelines. The document describes those aspects of the HSI design review process that are important to the identification and resolution of human engineering discrepancies that could adversely affect plant safety. Guidance is provided that could be used by the staff to review an applicant's HSI design review process or to guide the development of an HSI design review plan, e.g., as part of an inspection activity. The document also provides detailed HFE guidelines for the assessment of HSI design implementations. NUREG-0700, Revision 1, consists of three stand-alone volumes. Volume 3 contains an interactive software application of the NUREG-0700, Revision 1 guidance and a user's guide for this software. The software supports reviewers during review preparation, evaluation design using the human factors engineering guidelines, and in report preparation. The user's guide provides system requirements and installation instructions, detailed explanations of the software's functions and features, and a tutorial on using the software

User's guide for ICE

International Nuclear Information System (INIS)

Fraley, S.K.

1976-07-01

ICE is a cross-section mixing code which will accept cross sections from an AMPX working library and produce mixed cross sections in the AMPX working library format, ANISN format, and the group-independent ANISN format. User input is in the free-form or fixed-form FIDO structure. The code is operable as a module in the AMPX system

Nuclear Detection Figure Of Merit (NDFOM) Version 1.2 User's Guide

International Nuclear Information System (INIS)

Stroud, Phillip D.; Dufresne, Thomas A.

2012-01-01

NDFOM is a detector database and detector evaluation system, accessible as a web service. It runs on the same server as the Patriot service, but uses port 8081. In this user's guide, we will use the example case that the patriot service is running on http://patriot.lanl.gov. Then the NDFOM service would be accessible at the URL http://patriot.lanl.gov:8081/ndfom. In addition to local server installations, common server locations are 1) a patriot server running on a virtual machine (use the virtual machine URL with :8081/ndfom), and 2) a patriot server running on a local machine (use http://localhost:8081/ndfom or http://127.0.0.1:8081/ndfom). The home screen provides panels to select detectors, a scenario, and a figure-of-merit. It also has an 'analyze' button, which will evaluate the selected figure-of-merit for the selected detectors, for the scenario selected by the user. The detector effectiveness evaluations are presented through the browser in a ranked list of detectors. The user does not need to log in to perform analysis with pre-supplied detectors, scenarios, and FOMs. The homepage view is shown in Figure 1. The first panel displays a list of the detectors in the current detector database. The user can select one, some, or all detectors to evaluate. On the right of each listed detector, there is a star icon. Clicking that icon will open a panel that displays the details about that detector, such as detector material, dimensions, thresholds, etc. The center panel displays the pre-supplied scenarios that are in the database. A scenario specifies the source of interest, the spectrum of the radiation, the background radiation spectrum, the distance or distance of closest approach, the allowable false positive rate, and the dwell time or speed. Scenario details can be obtained by clicking the star to the right of a scenario. A scenario can be selected by clicking it.

Temperature, salinity, and other measurements collected using gliders in the Gulf of Mexico (NODC Accession 0065238)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Glider oceanographic data (temperature, salinity) collected in support of the Deepwater Horizon oil spill event in the Gulf of Mexico (NODC Accession 0065238).

User's guide for ABCI version 9.4 (azimuthal beam cavity interaction) and introducing the ABCI windows application package

International Nuclear Information System (INIS)

Chin, Yong Ho

2005-12-01

ABCI is a computer program which solves the Maxwell equations directly in the time domain when a bunched beam goes through an axi-symmetric structure on or off axis. An arbitrary charge distribution can be defined by the user (default=Gaussian). This document is meant to be a comprehensive user's guide to describe all features of ABCI version 9.4, including also all additions since the release of the guide for version 8.8. All appendixes from the previous two user's guides that contain different important topics are also quoted. The main advantages of ABCI lie in its high speed of execution, the minimum use of computer memory, implementation of Napoly integration method and many elaborate options of Fourier transformations. In the version 9.4, even wake potentials for a counter-rotating beam of opposite charge can be calculated instead of usual ones for a beam trailing the driving beams. Now, the Windows application version of ABCI is available as a package which includes ABCI stand-alone executable modules, the sample input files, the source codes, manuals and the Windows version of TopDrawer, TopDrawW. This package can be downloaded from the ABCI home page: http://abci.kek.jp/abci.htm. Just by drag-and-droping an input file on the icon of ABCI application, all the calculation results pop out. Neither compilation of the source code nor installation of the program to Windows is necessary. Together with the TopDrawer for Windows, all works (computation of wake fields, generation of figures and so on) can be done simply and easily on Windows alone. How to use ABCI on Windows and how to install the program to other computer systems are explained at the end of this manual. (author)

NOAA South Carolina oyster mapping orthoimagery, collection subset 3 of 5, 2003-2005 (NODC Accession 0084750)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set, 3 of 5 archived at the NODC, contains digital orthophotography. The data set presents information that represented conditions for the specified...

NOAA South Carolina oyster mapping orthoimagery, collection subset 2 of 5, 2003-2005 (NODC Accession 0084749)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set, 2 of 5 archived at the NODC, contains digital orthophotography. The data set presents information that represented conditions for the specified...

NOAA South Carolina oyster mapping orthoimagery, collection subset 4 of 5, 2003-2005 (NODC Accession 0084751)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set, 4 of 5 archived at the NODC, contains digital orthophotography. The data set presents information that represented conditions for the specified...

NOAA South Carolina oyster mapping orthoimagery, collection subset 1 of 5, 2003-2005 (NODC Accession 0084621)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set, 1 of 5 archived at the NODC, contains digital orthophotography. The data set presents information that represented conditions for the specified...

NOAA South Carolina oyster mapping orthoimagery, collection subset 5 of 5, 2003-2005 (NODC Accession 0084752)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set, 5 of 5 archived at the NODC, contains digital orthophotography. The data set presents information that represented conditions for the specified...

Improving Hearing Aid Self-Efficacy and Utility Through Revising a Hearing Aid User Guide: A Pilot Study.

Science.gov (United States)

McMullan, Alexandra; Kelly-Campbell, Rebecca J; Wise, Kim

2018-03-08

This pilot study aimed to investigate whether revising a hearing aid user guide (HAUG) is associated with improved hearing aid self-efficacy and utility performance. In Part 1, an HAUG was evaluated using the Suitability Assessment of Material (SAM) and readability formulas (Flesch Reading Ease [Flesch, 1943], Flesch-Kincaid Readability Formula [Kincaid, Fishburne, Rogers, & Chissom, 1957], and Simple Measure of Gobbledygook [McLaughlin, 1969]). The HAUG was revised using results from the SAM and best practice guidelines. The revision included generating a video. In Part 2, 30 adults with hearing impairment were randomly assigned to use either the original guide (N = 15) or the revised guide and video (N = 15) to perform a utility task. Participants' self-efficacy was measured using the Basic and Advanced Handling subscales of the Measure of Audiologic Rehabilitation Self-Efficacy for Hearing Aids questionnaire. SAM and readability were compared between the original and revised guides (Doak, Doak, & Root, 1996). SAM and readability were improved following the revision. Participants in the revised guide group performed significantly better on the utility task and on the Measure of Audiologic Rehabilitation Self-Efficacy for Hearing Aids subscales than participants in the original guide group. These results are encouraging as they indicate that there is scope to influence self-efficacy and utility performance through the use of appropriate HAUGs.

Nuclear computerized library for assessing reactor reliability (NUCLARR): User's guide: Part 3, NUCLARR system description

International Nuclear Information System (INIS)

Gilmore, W.E.; Gentillon, C.D.; Gertman, D.I.; Beers, G.H.; Galyean, W.J.; Gilbert, B.G.

1988-06-01

The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automated data base management system for processing and storing human error probability and hardware component failure data. The NUCLARR system software resides on an IBM (or compatible) personal micro-computer. NUCLARR can be used by the end user to furnish data inputs for both human and hardware reliability analysis in support of a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. Volume IV of this series is the User's Guide for operating the NUCLARR software and is presented in three parts. This document, Part 3: NUCLARR System Description, provides an in-depth discussion of the design characteristics and special features of the NUCLARR software. Part 3 also presents the organization of the data base structures and techniques used to manipulate the data

CGNS Mid-Level Software Library and Users Guide

Science.gov (United States)

Poirier, Diane; Smith, Charles A. (Technical Monitor)

1998-01-01

The "CFD General Notation System" (CGNS) consists of a collection of conventions, and conforming software, for the storage and retrieval of Computational Fluid Dynamics (CFD) data. It facilitates the exchange of data between sites and applications, and helps stabilize the archiving of aerodynamic data. This effort was initiated in order to streamline the procedures in exchanging data and software between NASA and its customers, but the goal is to develop CGNS into a National Standard for the exchange of aerodynamic data. The CGNS development team is comprised of members from Boeing Commercial Airplane Group, NASA-Ames, NASA-Langley, NASA-Lewis, McDonnell-Douglas Corporation (now Boeing-St. Louis), Air Force-Wright Lab., and ICEM-CFD Engineering. The elements of CGNS address all activities associated with the storage of data on external media and its movement to and from application programs. These elements include: - The Advanced Data Format (ADF) Database manager, consisting of both a file format specification and its I/O software, which handles the actual reading and writing of data from and to external storage media; - The Standard Interface Data Structures (SIDS), which specify the intellectual content of CFD data and the conventions governing naming and terminology; - The SIDS-to-ADF File Mapping conventions, which specify the exact location where the CFD data defined by the SIDS is to be stored within the ADF file(s); and - The CGNS Mid-level Library, which provides CFD-knowledgeable routines suitable for direct installation into application codes. The CGNS Mid-level Library was designed to ease the implementation of CGNS by providing developers with a collection of handy I/O functions. Since knowledge of the ADF core is not required to use this library, it will greatly facilitate the task of interfacing with CGNS. There are currently 48 user callable functions that comprise the Mid-level library and are described in the Users Guide. The library is written in

PST user's guide

International Nuclear Information System (INIS)

Rempe, J.L.; Cebull, M.J.; Gilbert, B.G.

1996-10-01

The Parametric Source Term (PST) software allows estimation of radioactivity release fractions for Level 2 Probabilistic Safety Assessments (PSAs). PST was developed at the Idaho National Engineering Laboratory (INEL) for the Nuclear Regulatory Commission's (NRC's) Accident Sequence Precursor (ASP) Program. PST contains a framework of equations that model activity transport between volumes in the release pathway from the core, through the vessel, through the containment, and to the environment. PST quickly obtains exact solutions to differential equations for activity transport in each volume for each time interval. PST provides a superior method for source term estimation because it: ensures conservation of activity transported across various volumes in the release pathway; provides limited consideration of the time-dependent behavior of input parameter uncertainty distributions; allows input to be quantified using state-of-the-art severe accident analysis code results; increases modeling flexibility because linkage between volumes is specified by user input; and allows other types of Light Water Reactor (LWR) plant designs to be evaluated with minimal modifications. PST is a microcomputer-based system that allows the analyst more flexibility than a mainframe system. PST has been developed to run with both MS DOS and MS Windows 95/NT operating systems. PST has the capability to load ASP Source Term Vector (STV) information, import pre-specified default input for the 6 Pressurized Water Reactors (PWRs) initially analyzed in the NRC ASP program, allow input value modifications for release fraction sensitivity studies, export user-specified default input for the LWR being modeled, report results of radioactivity release calculations at each time interval, and generate formatted results that can interface with other risk assessment codes. This report describes the PST model and provides guidelines for using PST

Guide to Preparing SAND Reports and other communication products : quick reference guide.

Energy Technology Data Exchange (ETDEWEB)

2009-10-01

This Quick Reference Guide supplements the more complete Guide to Preparing SAND Reports and Other Communication Products. It provides limited guidance on how to prepare SAND Reports at Sandia National Laboratories. Users are directed to the in-depth guide for explanations of processes.

TOUGH2 User's Guide Version 2

International Nuclear Information System (INIS)

Pruess, K.; Oldenburg, C.M.; Moridis, G.J.

1999-01-01

TOUGH2 is a numerical simulator for nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. The chief applications for which TOUGH2 is designed are in geothermal reservoir engineering, nuclear waste disposal, environmental assessment and remediation, and unsaturated and saturated zone hydrology. TOUGH2 was first released to the public in 1991; the 1991 code was updated in 1994 when a set of preconditioned conjugate gradient solvers was added to allow a more efficient solution of large problems. The current Version 2.0 features several new fluid property modules and offers enhanced process modeling capabilities, such as coupled reservoir-wellbore flow, precipitation and dissolution effects, and multiphase diffusion. Numerous improvements in previously released modules have been made and new user features have been added, such as enhanced linear equation solvers, and writing of graphics files. The T2VOC module for three-phase flows of water, air and a volatile organic chemical (VOC), and the T2DM module for hydrodynamic dispersion in 2-D flow systems have been integrated into the overall structure of the code and are included in the Version 2.0 package. Data inputs are upwardly compatible with the previous version. Coding changes were generally kept to a minimum, and were only made as needed to achieve the additional functionalities desired. TOUGH2 is written in standard FORTRAN77 and can be run on any platform, such as workstations, PCs, Macintosh, mainframe and supercomputers, for which appropriate FORTRAN compilers are available. This report is a self-contained guide to application of TOUGH2 to subsurface flow problems. It gives a technical description of the TOUGH2 code, including a discussion of the physical processes modeled, and the mathematical and numerical methods used. Illustrative sample problems are presented along with detailed instructions for preparing input data

Guide to preparing SAND reports and other communication products : quick reference guide.

Energy Technology Data Exchange (ETDEWEB)

2007-03-01

This 'Quick Reference Guide' supplements the more complete 'Guide to Preparing SAND Reports and Other Communication Products'. It provides limited guidance on how to prepare SAND Reports at Sandia National Laboratories. Users are directed to the in-depth guide for explanations of processes.

A Didactical User Guide for E-Learning in Science

Science.gov (United States)

Schuepbach, E.

2002-12-01

Development of e-learning courseware differs in many ways from conventional teaching, for example in terms of the role of tutors and students. Not all contents are suitable for e-learning; the construction of interactive graphs and complex animations is time-consuming and should be efficient and advantageous over an in-class lectures. Learning goals and tests are more important in e-learning than in conventional teaching; tests may be conditional, i.e. progression may be made dependent on successful completion of a test. Prior to production of an e-learning course, it is advised to develop a didactical concept, especially if e-learning strategies are missing in an organisation. The expectations on readily available pedagogical guidelines and didactic concepts from the point of view of science content providers are high. Here, concepts of e-pedagogy are introduced, and the highlights of a Didactical User Guide for E-Learning produced by Berne University, Switzerland and published by h.e.p. Publ. Switzerland in fall 2002 are presented. Selected didactic elements such as interactivity, communication, role of tutor and student are illustrated with an e-learning course on tropospheric ozone.

National Ignition Facility User Guide

Energy Technology Data Exchange (ETDEWEB)

Keane, C J [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2014-09-03

This user manual is intended to provide sufficient information to allow researchers to become familiar with NIF and develop preliminary plans for NIF experiments. It also provides references to further detail that will allow detailed experiment planning.

The QDP/PLT user's guide

Science.gov (United States)

Tennant, Allyn F.

1991-01-01

PLT is a high level plotting package. A Programmer can create a default plot suited for the data being displayed. At run times, users can then interact with the plot overriding any or all of these defaults. The user is also provided the capability to fit functions to the displayed data. This ability to display, interact with, and to fit the data make PLT a useful tool in the analysis of data. The Quick and Dandy Plotter (QDP) program will read ASCII text files that contain PLT commands and data. Thus, QDP provides and easy way to use the PLT software QPD files provide a convenient way to exchange data. The QPD/PLT software is written in standard FORTRAN 77 and has been ported to VAX VMS, SUN UNIX, IBM AIX, NeXT NextStep, and MS-DOS systems.

Surface water management: a user's guide to calculate a water balance using the CREAMS model

International Nuclear Information System (INIS)

Lane, L.J.

1984-11-01

The hydrologic component of the CREAMS model is described and discussed in terms of calculating a surface water balance for shallow land burial systems used for waste disposal. Parameter estimates and estimation procedures are presented in detail in the form of a user's guide. Use of the model is illustrated with three examples based on analysis of data from Los Alamos, New Mexico and Rock Valley, Nevada. Use of the model in design of trench caps for shallow land burial systems is illustrated with the example applications at Los Alamos

A highly unscientific guide to civil-military coherence

DEFF Research Database (Denmark)

Zartsdahl, Peter Horne

2017-01-01

Coordinating external instruments is easy. In this EU-CIVCAP newsletter editorial, we provide a highly unscientific guide to succesful civil-military coherence. A User's Guide to Coherence; and extensive collection of buzzwords.......Coordinating external instruments is easy. In this EU-CIVCAP newsletter editorial, we provide a highly unscientific guide to succesful civil-military coherence. A User's Guide to Coherence; and extensive collection of buzzwords....

Dynamically Allocated Virtual Clustering Management System Users Guide

Science.gov (United States)

2016-11-01

ARL-SR-0366 ● NOV 2016 US Army Research Laboratory Dynamically Allocated Virtual Clustering Management System User’s Guide by... Clustering Management System User’s Guide by Kelvin M Marcus Computational and Information Sciences Directorate, ARL...

Xyce Parallel Electronic Simulator : reference guide, version 4.1.

Energy Technology Data Exchange (ETDEWEB)

Mei, Ting; Rankin, Eric Lamont; Thornquist, Heidi K.; Santarelli, Keith R.; Fixel, Deborah A.; Coffey, Todd Stirling; Russo, Thomas V.; Schiek, Richard Louis; Keiter, Eric Richard; Pawlowski, Roger Patrick

2009-02-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide.

Mastering IDEAScript the definitive guide

CERN Document Server

Mueller, John Paul

2011-01-01

With approximately 44,000 users in the U.S. and Canada, as well as 42,000 in Europe, IDEA software has become a leading provider of data analysis software for use by auditors and accountants. Written to provide users with a quick access guide for optimal use of IDEAScript, Mastering IDEAScript: The Definitive Guide is IDEA's official guide to mastering IDEAScript, covering essential topics such as Introducing IDEAScript, Understanding the Basics of IDEAScript Editor, Designing Structured Applications, Understanding IDEA Databases and much more. For auditors, accountants and controllers.

Renewable Energy Power System Modular SIMulators: RPM-Sim User's Guide (Supersedes October 1999 edition)

Energy Technology Data Exchange (ETDEWEB)

Bialasiewicz, J.T.; Muljadi, E.; Nix, G.R.; Drouilhet, S.

2001-03-28

This version of the RPM-SIM User's Guide supersedes the October 1999 edition. Using the VisSimTM visual environment, researchers developed a modular simulation system to facilitate an application-specific, low-cost study of the system dynamics for wind-diesel hybrid power systems. This manual presents the principal modules of the simulator and, using case studies of a hybrid system, demonstrates some of the benefits that can be gained from understanding the effects of the designer's modifications to these complex dynamic systems.

Hanford Environmental Information System (HEIS). Volume 1, User`s guide

Energy Technology Data Exchange (ETDEWEB)

1994-01-14

The Hanford Environmental Information System (HEIS) is a consolidated set of automated resources that effectively manage the data gathered during environmental monitoring and restoration of the Hanford Site. HEIS includes an integrated database that provides consistent and current data to all users and promotes sharing of data by the entire user community. HEIS is an information system with an inclusive database. Although the database is the nucleus of the system, HEIS also provides user access software: query-by-form data entry, extraction, and browsing facilities; menu-driven reporting facilities; an ad hoc query facility; and a geographic information system (GIS). These features, with the exception of the GIS, are described in this manual set. Because HEIS contains data from the entire Hanford Site, many varieties of data are included and have.been divided into subject areas. Related subject areas comprise several volumes of the manual set. The manual set includes a data dictionary that lists all of the fields in the HEIS database, with their definitions and a cross reference of their locations in the database; definitions of data qualifiers for analytical results; and a mapping between the HEIS software functions and the keyboard keys for each of the supported terminals or terminal emulators.

CURRENT - DIRECTION and Other Data from UNKNOWN From World-Wide Distribution from 19350101 to 19781231 (NODC Accession 8800247)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains NODC station data spanning from January 1935 to December 1978. The data set contains quality controlled station data profiles for standard...

Delayed CTD data submitted by INIDEP ranging from 11/26/1984 - 10/16/1989 (NODC Accession 0039468)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — CTD data were collected in the South Atlantic aboard the Oca Balda from 26 November 1984 to 16 October 1989. These data were submitted to NODC by the INSTITUTO...

LTCP 2D Graphical User Interface. Application Description and User's Guide

Science.gov (United States)

Ball, Robert; Navaz, Homayun K.

1996-01-01

A graphical user interface (GUI) written for NASA's LTCP (Liquid Thrust Chamber Performance) 2 dimensional computational fluid dynamic code is described. The GUI is written in C++ for a desktop personal computer running under a Microsoft Windows operating environment. Through the use of common and familiar dialog boxes, features, and tools, the user can easily and quickly create and modify input files for the LTCP code. In addition, old input files used with the LTCP code can be opened and modified using the GUI. The application is written in C++ for a desktop personal computer running under a Microsoft Windows operating environment. The program and its capabilities are presented, followed by a detailed description of each menu selection and the method of creating an input file for LTCP. A cross reference is included to help experienced users quickly find the variables which commonly need changes. Finally, the system requirements and installation instructions are provided.

Xyce™ Parallel Electronic Simulator Reference Guide Version 6.8

Energy Technology Data Exchange (ETDEWEB)

Keiter, Eric R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Aadithya, Karthik Venkatraman [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Mei, Ting [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Russo, Thomas V. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Schiek, Richard L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Sholander, Peter E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Thornquist, Heidi K. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Verley, Jason C. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-10-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users' Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce . This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users' Guide.

Tensoral for post-processing users and simulation authors

Science.gov (United States)

Dresselhaus, Eliot

1993-01-01

The CTR post-processing effort aims to make turbulence simulations and data more readily and usefully available to the research and industrial communities. The Tensoral language, which provides the foundation for this effort, is introduced here in the form of a user's guide. The Tensoral user's guide is presented in two main sections. Section one acts as a general introduction and guides database users who wish to post-process simulation databases. Section two gives a brief description of how database authors and other advanced users can make simulation codes and/or the databases they generate available to the user community via Tensoral database back ends. The two-part structure of this document conforms to the two-level design structure of the Tensoral language. Tensoral has been designed to be a general computer language for performing tensor calculus and statistics on numerical data. Tensoral's generality allows it to be used for stand-alone native coding of high-level post-processing tasks (as described in section one of this guide). At the same time, Tensoral's specialization to a minute task (namely, to numerical tensor calculus and statistics) allows it to be easily embedded into applications written partly in Tensoral and partly in other computer languages (here, C and Vectoral). Embedded Tensoral, aimed at advanced users for more general coding (e.g. of efficient simulations, for interfacing with pre-existing software, for visualization, etc.), is described in section two of this guide.

LISA. A code for safety assessment in nuclear waste disposals program description and user guide

International Nuclear Information System (INIS)

Saltelli, A.; Bertozzi, G.; Stanners, D.A.

1984-01-01

The code LISA (Long term Isolation Safety Assessment), developed at the Joint Research Centre, Ispra is a useful tool in the analysis of the hazard due to the disposal of nuclear waste in geological formations. The risk linked to preestablished release scenarios is assessed by the code in terms of dose rate to a maximum exposed individual. The various submodels in the code simulate the system of barriers -both natural and man made- which are interposed between the contaminants and man. After a description of the code features a guide for the user is supplied and then a test case is presented

Code manual for MACCS2: Volume 1, user's guide

International Nuclear Information System (INIS)

Chanin, D.I.; Young, M.L.

1997-03-01

This report describes the use of the MACCS2 code. The document is primarily a user's guide, though some model description information is included. MACCS2 represents a major enhancement of its predecessor MACCS, the MELCOR Accident Consequence Code System. MACCS, distributed by government code centers since 1990, was developed to evaluate the impacts of severe accidents at nuclear power plants on the surrounding public. The principal phenomena considered are atmospheric transport and deposition under time-variant meteorology, short- and long-term mitigative actions and exposure pathways, deterministic and stochastic health effects, and economic costs. No other U.S. code that is publicly available at present offers all these capabilities. MACCS2 was developed as a general-purpose tool applicable to diverse reactor and nonreactor facilities licensed by the Nuclear Regulatory Commission or operated by the Department of Energy or the Department of Defense. The MACCS2 package includes three primary enhancements: (1) a more flexible emergency-response model, (2) an expanded library of radionuclides, and (3) a semidynamic food-chain model. Other improvements are in the areas of phenomenological modeling and new output options. Initial installation of the code, written in FORTRAN 77, requires a 486 or higher IBM-compatible PC with 8 MB of RAM

The cervical vertebral maturation method: A user's guide.

Science.gov (United States)

McNamara, James A; Franchi, Lorenzo

2018-03-01

The cervical vertebral maturation (CVM) method is used to determine the craniofacial skeletal maturational stage of an individual at a specific time point during the growth process. This diagnostic approach uses data derived from the second (C2), third (C3), and fourth (C4) cervical vertebrae, as visualized in a two-dimensional lateral cephalogram. Six maturational stages of those three cervical vertebrae can be determined, based on the morphology of their bodies. The first step is to evaluate the inferior border of these vertebral bodies, determining whether they are flat or concave (ie, presence of a visible notch). The second step in the analysis is to evaluate the shape of C3 and C4. These vertebral bodies change in shape in a typical sequence, progressing from trapezoidal to rectangular horizontal, to square, and to rectangular vertical. Typically, cervical stages (CSs) 1 and CS 2 are considered prepubertal, CS 3 and CS 4 circumpubertal, and CS 5 and CS 6 postpubertal. Criticism has been rendered as to the reproducibility of the CVM method. Diminished reliability may be observed at least in part due to the lack of a definitive description of the staging procedure in the literature. Based on the now nearly 20 years of experience in staging cervical vertebrae, this article was prepared as a "user's guide" that describes the CVM stages in detail in attempt to help the reader use this approach in everyday clinical practice.

Total System Performance Assessment Code (TOSPAC); Volume 2, User`s guide: Yucca Mountain Site Characterization Project

Energy Technology Data Exchange (ETDEWEB)

Gauthier, J.H.; Dudley, A.L; Skinner, L.H. [Spectra Research Inst., Albuquerque, NM (United States); Wilson, M.L.; Peters, R.R. [Sandia National Labs., Albuquerque, NM (United States)

1992-07-01

TOSPAC is a computer program that calculates partially saturated groundwater flow with the transport of water-soluble contaminants. TOSPAC Version 1 is restricted to calculations involving one-dimensional, vertical columns of one or more media. TOSPAC was developed to help answer questions surrounding the burial of toxic wastes in arid regions. Burial of wastes in arid regions is attractive because of generally low population densities and little groundwater flow, in the unsaturated zone, to disturb the waste. TOSPAC helps to quantify groundwater flow and the spread of contamination, offering an idea of what could happen in the distant future. Figure 1.1 illustrates the problem TOSPAC was designed to investigate. For groundwater flow, TOSPAC can provide saturations, velocities, and and travel tunes for water in the rock matrix or the fractures in the unsaturated zone. TOSPAC can determine how hydrologic conditions vary when the rate of infiltration changes. For contaminant transport, TOSPAC can compute how much of a contaminant is dissolved in the water and how it is distributed. TOSPAC can determine how fast the solute is moving and the shape of the concentration front. And TOSPAC can be used to investigate how much of the contaminant remains in the inventory of a repository, how much is adsorbed onto the soil or rock matrix, and how much reaches the water table. Effective use of TOSPAC requires knowledge in a number of diverse disciplines, including real groundwater flow and transport, the mathematical models of groundwater flow and transport, real-world data required for the models, and the numerical solution of differential equations. Equally important is a realization of the limitations intrinsic to a computer model of complex physical phenomena. This User`s Guide not only describes the mechanics of executing TOSPAC on a computer, but also examines these other topics.

Advanced Data Format (ADF) Software Library and Users Guide

Science.gov (United States)

Smith, Matthew; Smith, Charles A. (Technical Monitor)

1998-01-01

Core library and are described in the Users Guide. The library is written in C, but each function has a FORTRAN counterpart.

DART 7.0 User Guide

Energy Technology Data Exchange (ETDEWEB)

Enders, Alexander L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lousteau, Angela L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-06-01

The Desktop Analysis Reporting Tool (DART) is a software package that allows users to easily view and analyze daily files that span long periods. DART gives users the capability to quickly determine the state of health of a radiation portal monitor (RPM), troubleshoot and diagnose problems, and view data in various time frames to perform trend analysis. In short, it converts the data strings written in the daily files into meaningful tables and plots. The standalone version of DART (“soloDART”) utilizes a database engine that is included with the application; no additional installations are necessary. There is also a networked version of DART (“polyDART”) that is designed to maximize the benefit of a centralized data repository while distributing the workload to individual desktop machines. This networked approach requires a more complex database manager Structured Query Language (SQL) Server; however, SQL Server is not currently provided with DART. Regardless of which version is used, DART will import daily files from RPMs, store the relevant data in its database, and it can produce reports for status, trend analysis, and reporting purposes.

DART 7.0 User Guide

International Nuclear Information System (INIS)

Enders, Alexander L.; Lousteau, Angela L.

2016-01-01

The Desktop Analysis Reporting Tool (DART) is a software package that allows users to easily view and analyze daily files that span long periods. DART gives users the capability to quickly determine the state of health of a radiation portal monitor (RPM), troubleshoot and diagnose problems, and view data in various time frames to perform trend analysis. In short, it converts the data strings written in the daily files into meaningful tables and plots. The standalone version of DART (''soloDART'') utilizes a database engine that is included with the application; no additional installations are necessary. There is also a networked version of DART (''polyDART'') that is designed to maximize the benefit of a centralized data repository while distributing the workload to individual desktop machines. This networked approach requires a more complex database manager Structured Query Language (SQL) Server; however, SQL Server is not currently provided with DART. Regardless of which version is used, DART will import daily files from RPMs, store the relevant data in its database, and it can produce reports for status, trend analysis, and reporting purposes.

FACSIM/MRS (Monitored Retrievable Storage)-2: Storage and shipping model documentation and user's guide

Energy Technology Data Exchange (ETDEWEB)

Huber, H.D.; Chockie, A.D.; Hostick, C.J.; Otis, P.T.; Sovers, R.A.

1987-06-01

The Pacific Northwest Laboratory (PNL) has developed a stochastic computer model, FACSIM/MRS, to assist in assessing the operational performance of the Monitored Retrievable Storage (MRS) waste-handling facility. This report provides the documentation and user's guide for FACSIM/MRS-2, which is also referred to as the back-end model. The FACSIM/MRS-2 model simulates the MRS storage and shipping operations, which include handling canistered spent fuel and secondary waste in the shielded canyon cells, in onsite yard storage, and in repository shipping cask loading areas.

Waste Management Information System (WMIS) User Guide

International Nuclear Information System (INIS)

Broz, R.E.

2008-01-01

This document provides the user of the Waste Management Information System (WMIS) instructions on how to use the WMIS software. WMIS allows users to initiate, track, and close waste packages. The modular design supports integration and utilization of data through the various stages of waste management. The phases of the waste management work process include generation, designation, packaging, container management, procurement, storage, treatment, transportation, and disposal

Waste Management Information System (WMIS) User Guide

Energy Technology Data Exchange (ETDEWEB)

R. E. Broz

2008-12-22

This document provides the user of the Waste Management Information System (WMIS) instructions on how to use the WMIS software. WMIS allows users to initiate, track, and close waste packages. The modular design supports integration and utilization of data throuh the various stages of waste management. The phases of the waste management work process include generation, designation, packaging, container management, procurement, storage, treatment, transportation, and disposal.

Xyce parallel electronic simulator reference guide, version 6.1

Energy Technology Data Exchange (ETDEWEB)

Keiter, Eric R; Mei, Ting; Russo, Thomas V.; Schiek, Richard Louis; Sholander, Peter E.; Thornquist, Heidi K.; Verley, Jason C.; Baur, David Gregory

2014-03-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide [1] . The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide [1] .

Xyce parallel electronic simulator reference guide, version 6.0.

Energy Technology Data Exchange (ETDEWEB)

Keiter, Eric R; Mei, Ting; Russo, Thomas V.; Schiek, Richard Louis; Thornquist, Heidi K.; Verley, Jason C.; Fixel, Deborah A.; Coffey, Todd S; Pawlowski, Roger P; Warrender, Christina E.; Baur, David Gregory.

2013-08-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide [1] . The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide [1] .

Xyce parallel electronic simulator : reference guide.

Energy Technology Data Exchange (ETDEWEB)

Mei, Ting; Rankin, Eric Lamont; Thornquist, Heidi K.; Santarelli, Keith R.; Fixel, Deborah A.; Coffey, Todd Stirling; Russo, Thomas V.; Schiek, Richard Louis; Warrender, Christina E.; Keiter, Eric Richard; Pawlowski, Roger Patrick

2011-05-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide. The Xyce Parallel Electronic Simulator has been written to support, in a rigorous manner, the simulation needs of the Sandia National Laboratories electrical designers. It is targeted specifically to run on large-scale parallel computing platforms but also runs well on a variety of architectures including single processor workstations. It also aims to support a variety of devices and models specific to Sandia needs. This document is intended to complement the Xyce Users Guide. It contains comprehensive, detailed information about a number of topics pertinent to the usage of Xyce. Included in this document is a netlist reference for the input-file commands and elements supported within Xyce; a command line reference, which describes the available command line arguments for Xyce; and quick-references for users of other circuit codes, such as Orcad's PSpice and Sandia's ChileSPICE.

NORTRIP emission model user guide

Energy Technology Data Exchange (ETDEWEB)

Denby, Rolstad Bruce

2012-07-01

The NORTRIP emission model has been developed at NILU, in conjunction with other Nordic institutes, to model non-exhaust traffic induced emissions. This short summary document explains how to run the NORTRIP model from the MATLAB environment or by using the executable user interface version. It also provides brief information on input files and the model architecture.(Author)

Temperature, salinity, nutrients, and meteorological data collected from 1926 to 1991 aboard multiple platforms in Caspian Sea (NODC Accession 0072200)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0072200 contains temperature, salinity, nutrients, and meteorological data collected from 1926 to 1991 aboard multiple platforms in Caspian Sea.

Self-Guided Web-Based Interventions: Scoping Review on User Needs and the Potential of Embodied Conversational Agents to Address Them.

Science.gov (United States)

Scholten, Mark R; Kelders, Saskia M; Van Gemert-Pijnen, Julia Ewc

2017-11-16

Web-based mental health interventions have evolved from innovative prototypes to evidence-based and clinically applied solutions for mental diseases such as depression and anxiety. Open-access, self-guided types of these solutions hold the promise of reaching and treating a large population at a reasonable cost. However, a considerable factor that currently hinders the effectiveness of these self-guided Web-based interventions is the high level of nonadherence. The absence of a human caregiver apparently has a negative effect on user adherence. It is unknown to what extent this human support can be handed over to the technology of the intervention to mitigate this negative effect. The first objective of this paper was to explore what is known in literature about what support a user needs to stay motivated and engaged in an electronic health (eHealth) intervention that requires repeated use. The second objective was to explore the current potential of embodied conversational agents (ECAs) to provide this support. This study reviews and interprets the available literature on (1) support within eHealth interventions that require repeated use and (2) the potential of ECAs by means of a scoping review. The rationale for choosing a scoping review is that the subject is broad, diverse, and largely unexplored. Themes for (1) and (2) were proposed based on grounded theory and mapped on each other to find relationships. The results of the first part of this study suggest the presence of user needs that largely remain implicit and unaddressed. These support needs can be categorized as task-related support and emotion-related support. The results of the second part of this study suggest that ECAs are capable of engaging and motivating users of information technology applications in the domains of learning and behavioral change. Longitudinal studies must be conducted to determine under what circumstances ECAs can create and maintain a productive user relationship. Mapping the

TAILSIM Users Guide

Science.gov (United States)

Hiltner, Dale W.

2000-01-01

The TAILSIM program uses a 4th order Runge-Kutta method to integrate the standard aircraft equations-of-motion (EOM). The EOM determine three translational and three rotational accelerations about the aircraft's body axis reference system. The forces and moments that drive the EOM are determined from aerodynamic coefficients, dynamic derivatives, and control inputs. Values for these terms are determined from linear interpolation of tables that are a function of parameters such as angle-of-attack and surface deflections. Buildup equations combine these terms and dimensionalize them to generate the driving total forces and moments. Features that make TAILSIM applicable to studies of tailplane stall include modeling of the reversible control System, modeling of the pilot performing a load factor and/or airspeed command task, and modeling of vertical gusts. The reversible control system dynamics can be described as two hinged masses connected by a spring. resulting in a fifth order system. The pilot model is a standard form of lead-lag with a time delay applied to an integrated pitch rate and/or airspeed error feedback. The time delay is implemented by a Pade approximation, while the commanded pitch rate is determined by a commanded load factor. Vertical gust inputs include a single 1-cosine gust and a continuous NASA Dryden gust model. These dynamic models. coupled with the use of a nonlinear database, allow the tailplane stall characteristics, elevator response, and resulting aircraft response, to be modeled. A useful output capability of the TAILSIM program is the ability to display multiple post-run plot pages to allow a quick assessment of the time history response. There are 16 plot pages currently available to the user. Each plot page displays 9 parameters. Each parameter can also be displayed individually. on a one plot-per-page format. For a more refined display of the results the program can also create files of tabulated data. which can then be used by other

User’s guide for MapMark4GUI—A graphical user interface for the MapMark4 R package

Science.gov (United States)

Shapiro, Jason

2018-05-29

MapMark4GUI is an R graphical user interface (GUI) developed by the U.S. Geological Survey to support user implementation of the MapMark4 R statistical software package. MapMark4 was developed by the U.S. Geological Survey to implement probability calculations for simulating undiscovered mineral resources in quantitative mineral resource assessments. The GUI provides an easy-to-use tool to input data, run simulations, and format output results for the MapMark4 package. The GUI is written and accessed in the R statistical programming language. This user’s guide includes instructions on installing and running MapMark4GUI and descriptions of the statistical output processes, output files, and test data files.

OPTIGRAMI V2 user's guide

Science.gov (United States)

Penny S. Lawson; R. Edward Thomas; Elizabeth S Walker

1996-01-01

OPTIGRAMI V2 is a computer program available for IBM persaonl computer with 80286 and higher processors. OPTIGRAMI V2 determines the least-cost lumber grade mix required to produce a given cutting order for clear parts from rough lumber of known grades in a crosscut-first rough mill operation. It is a user-friendly integrated application that includes optimization...

User's Guide to the Weighted-Multiple-Linear Regression Program (WREG version 1.0)

Science.gov (United States)

Eng, Ken; Chen, Yin-Yu; Kiang, Julie.E.

2009-01-01

Streamflow is not measured at every location in a stream network. Yet hydrologists, State and local agencies, and the general public still seek to know streamflow characteristics, such as mean annual flow or flood flows with different exceedance probabilities, at ungaged basins. The goals of this guide are to introduce and familiarize the user with the weighted multiple-linear regression (WREG) program, and to also provide the theoretical background for program features. The program is intended to be used to develop a regional estimation equation for streamflow characteristics that can be applied at an ungaged basin, or to improve the corresponding estimate at continuous-record streamflow gages with short records. The regional estimation equation results from a multiple-linear regression that relates the observable basin characteristics, such as drainage area, to streamflow characteristics.

User's Guide for RESRAD-OFFSITE

Energy Technology Data Exchange (ETDEWEB)

Gnanapragasam, E. [Argonne National Lab. (ANL), Argonne, IL (United States); Yu, C. [Argonne National Lab. (ANL), Argonne, IL (United States)

2015-04-01

The RESRAD-OFFSITE code can be used to model the radiological dose or risk to an offsite receptor. This User’s Guide for RESRAD-OFFSITE Version 3.1 is an update of the User’s Guide for RESRAD-OFFSITE Version 2 contained in the Appendix A of the User’s Manual for RESRAD-OFFSITE Version 2 (ANL/EVS/TM/07-1, DOE/HS-0005, NUREG/CR-6937). This user’s guide presents the basic information necessary to use Version 3.1 of the code. It also points to the help file and other documents that provide more detailed information about the inputs, the input forms and features/tools in the code; two of the features (overriding the source term and computing area factors) are discussed in the appendices to this guide. Section 2 describes how to download and install the code and then verify the installation of the code. Section 3 shows ways to navigate through the input screens to simulate various exposure scenarios and to view the results in graphics and text reports. Section 4 has screen shots of each input form in the code and provides basic information about each parameter to increase the user’s understanding of the code. Section 5 outlines the contents of all the text reports and the graphical output. It also describes the commands in the two output viewers. Section 6 deals with the probabilistic and sensitivity analysis tools available in the code. Section 7 details the various ways of obtaining help in the code.

UAL USER GUIDE

International Nuclear Information System (INIS)

MALITSKY, N.; TALMAN, R.

2003-01-01

The Unified Accelerator Libraries (UAL) provide a modularized environment for applying diverse accelerator simulation codes. Development of UAL is strongly prejudiced toward1 importing existing codes rather than developing new ones. This guide provides instructions for using this environment. This includes instructions for acquiring and building the codes, then for launching and interpreting some of the examples included with the distribution. In some cases the examples are general enough to be applied to different accelerators by mimicking input files and input parameters. The intention is to provide just enough computer language discussion (C++ and Perl) to support the use and understanding of the examples and to help the reader gain a general understanding of the overall architecture. Otherwise the manual is ''documentation by example.'' Except for an appendix concerning maps, discussion of physics is limited to comments accompanying the numerous code examples. Importation of codes into UAL is an ongoing enterprise and when a code is said to have been Imported it does not necessarily mean that all features are supported. Other than this, the original documentation remains applicable (and is not duplicated here.)

UAL USER GUIDE.

Energy Technology Data Exchange (ETDEWEB)

MALITSKY,N.; TALMAN,R.

2003-01-09

The Unified Accelerator Libraries (UAL) provide a modularized environment for applying diverse accelerator simulation codes. Development of UAL is strongly prejudiced toward1 importing existing codes rather than developing new ones. This guide provides instructions for using this environment. This includes instructions for acquiring and building the codes, then for launching and interpreting some of the examples included with the distribution. In some cases the examples are general enough to be applied to different accelerators by mimicking input files and input parameters. The intention is to provide just enough computer language discussion (C++ and Perl) to support the use and understanding of the examples and to help the reader gain a general understanding of the overall architecture. Otherwise the manual is ''documentation by example.'' Except for an appendix concerning maps, discussion of physics is limited to comments accompanying the numerous code examples. Importation of codes into UAL is an ongoing enterprise and when a code is said to have been Imported it does not necessarily mean that all features are supported. Other than this, the original documentation remains applicable (and is not duplicated here.)

Ocean Acidification Scientific Data Stewardship: An approach for end-to-end data management and integration

Science.gov (United States)

Arzayus, K. M.; Garcia, H. E.; Jiang, L.; Michael, P.

2012-12-01

As the designated Federal permanent oceanographic data center in the United States, NOAA's National Oceanographic Data Center (NODC) has been providing scientific stewardship for national and international marine environmental and ecosystem data for over 50 years. NODC is supporting NOAA's Ocean Acidification Program and the science community by providing end-to-end scientific data management of ocean acidification (OA) data, dedicated online data discovery, and user-friendly access to a diverse range of historical and modern OA and other chemical, physical, and biological oceanographic data. This effort is being catalyzed by the NOAA Ocean Acidification Program, but the intended reach is for the broader scientific ocean acidification community. The first three years of the project will be focused on infrastructure building. A complete ocean acidification data content standard is being developed to ensure that a full spectrum of ocean acidification data and metadata can be stored and utilized for optimal data discovery and access in usable data formats. We plan to develop a data access interface capable of allowing users to constrain their search based on real-time and delayed mode measured variables, scientific data quality, their observation types, the temporal coverage, methods, instruments, standards, collecting institutions, and the spatial coverage. In addition, NODC seeks to utilize the existing suite of international standards (including ISO 19115-2 and CF-compliant netCDF) to help our data producers use those standards for their data, and help our data consumers make use of the well-standardized metadata-rich data sets. These tools will be available through our NODC Ocean Acidification Scientific Data Stewardship (OADS) web page at http://www.nodc.noaa.gov/oceanacidification. NODC also has a goal to provide each archived dataset with a unique ID, to ensure a means of providing credit to the data provider. Working with partner institutions, such as the

7 CFR 1942.20 - Community Facility Guides.

Science.gov (United States)

2010-01-01

... Commitment. (2) Guide 2—Water Users Agreement. (3) Guide 3—Service Declination Statement. (4) Guide 4—Bylaws. (5) Guide 5—Financial Feasibility Report. (6) Guide 6—Preliminary Architectural Feasibility Report... 12—Memorandum of Understanding Between the Economic Development Administration—Department of Commerce...

Keeping it wild in the National Park Service: A user guide to integrating wilderness character into park planning, management, and monitoring

Science.gov (United States)

Peter Landres; Suzy Stutzman; Wade Vagias; Carol Cook; Christina Mills; Tim Devine; Sandee Dingman; Adrienne Lindholm; Miki Stuebe; Melissa Memory; Ruth Scott; Michael Bilecki; Ray O' Neil; Chris Holbeck; Frank Turina; Michael Haynie; Sarah Craighead; Chip Jenkins; Jeremy Curtis; Karen Trevino

2014-01-01

This User Guide was developed to help National Park Service (NPS) staff effectively and efficiently fulfill the mandate from the 1964 Wilderness Act and NPS policy to "preserve wilderness character" now and into the future. This mandate applies to all congressionally designated wilderness and other park lands that are, by policy, managed as wilderness,...

User Guide for the International Jobs and Economic Development Impacts Model

Energy Technology Data Exchange (ETDEWEB)

Keyser, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Flores-Espino, Francisco [National Renewable Energy Lab. (NREL), Golden, CO (United States); Uriarte, Caroline [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cox, Sadie [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-09-01

The International Jobs and Economic Development Impacts (I-JEDI) model is a freely available economic model that estimates gross economic impacts from wind, solar, and geothermal energy projects for several different countries. Building on the original JEDI model, which was developed for the United States, I-JEDI was developed under the USAID Enhancing Capacity for Low Emission Development Strategies (EC-LEDS) program to support countries in assessing economic impacts of LEDS actions in the energy sector. I-JEDI estimates economic impacts by characterizing the construction and operation of energy projects in terms of expenditures and the portion of these expenditures made within the country of analysis. These data are then used in a country-specific input-output (I-O) model to estimate employment, earnings, gross domestic product (GDP), and gross output impacts. Total economic impacts are presented as well as impacts by industry. This user guide presents general information about how to use I-JEDI and interpret results as well as detailed information about methodology and model limitations.

MSTS Multiphase Subsurface Transport Simulator User's Guide and Reference

Energy Technology Data Exchange (ETDEWEB)

Nichols, W.E.; White, M.D.

1993-05-01

This User's Guide and Reference provides information and instructions on the use of the Multiphase Subsurface Transport Simulator (MSTS) code and the associated MSTS Graphical Input. The MSTS code is used to simulate water flow, air flow, heat transfer, and dilute species mass transport in variably saturated geologic media for one, two, or three dimensions using an integrated finite-difference numerical scheme. Any or all of these processes may be simulated in a fully coupled manner. MSTS is a two-phase, two-component code with secondary processes that include binary diffusion and vapor pressure lowering. The geologic media may be homogeneous or heterogeneous, isotropic or anisotropic, and unfractured or highly fractured. A problem geometry may be described by either Cartesian or cylindrical coordinates. MSTS is written in FORTRAN 77, following the American National Standards Institute (ANSI) standards, and is machine-independent with the exception of some time and date calls required for quality control (provisions are made in the code for relatively easy adoption to a number of machines for these calls).

ZBASE User's Guide Version 1.1 an Impedance Data Base Program

CERN Document Server

Brüning, Oliver Sim

1996-01-01

The development of an impedance data base program was motivated by the changing impedance budgets in the LEP and LHC machines and the resulting need to recalculate the instability thresholds for different parameters. For LEP, the changes are implied by the LEP-II upgrade and for the LHC, the impedance data for most items is still being calculated and continues to change as the geometries of the impedance components converge to a final design. The development of the {\\bf ZBASE} program was guided by four goals. First, the data base program should collect the impedance information in a central place and in a standard format which allows easy access. Second, it should include information required for estimating the impact of the impedance on the beam dynamics. Third, the program should provide a user friendly graphical interface and fourth, it should provide an interface to the programs that are used for calculating the impedance data. Collecting not only the impedance data but also the input files for the progr...

Guiding Design: Exposing Librarian and Student Mental Models of Research Guides

Science.gov (United States)

Sinkinson, Caroline; Alexander, Stephanie; Hicks, Alison; Kahn, Meredith

2012-01-01

This article details an open card sort study administered to undergraduate students, graduate students, and librarians at the University of Colorado at Boulder in order to reveal perceptions of library research guides. The study identifies user group preferences for organization and content of research guides, as well as themes emerging from the…

Xyce parallel electronic simulator reference guide, Version 6.0.1.

Energy Technology Data Exchange (ETDEWEB)

Keiter, Eric R; Mei, Ting; Russo, Thomas V.; Schiek, Richard Louis; Thornquist, Heidi K.; Verley, Jason C.; Fixel, Deborah A.; Coffey, Todd S; Pawlowski, Roger P; Warrender, Christina E.; Baur, David Gregory.

2014-01-01

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users Guide [1] . The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users Guide [1] .

AVERT User Manual

Science.gov (United States)

AVERT is a flexible modeling framework with a simple user interface designed specifically to meet the needs of state air quality planners and other interested stakeholders. Use this guide to get started.

Modcomp MAX IV System Processors reference guide

Energy Technology Data Exchange (ETDEWEB)

Cummings, J.

1990-10-01

A user almost always faces a big problem when having to learn to use a new computer system. The information necessary to use the system is often scattered throughout many different manuals. The user also faces the problem of extracting the information really needed from each manual. Very few computer vendors supply a single Users Guide or even a manual to help the new user locate the necessary manuals. Modcomp is no exception to this, Modcomp MAX IV requires that the user be familiar with the system file usage which adds to the problem. At General Atomics there is an ever increasing need for new users to learn how to use the Modcomp computers. This paper was written to provide a condensed Users Reference Guide'' for Modcomp computer users. This manual should be of value not only to new users but any users that are not Modcomp computer systems experts. This Users Reference Guide'' is intended to provided the basic information for the use of the various Modcomp System Processors necessary to, create, compile, link-edit, and catalog a program. Only the information necessary to provide the user with a basic understanding of the Systems Processors is included. This document provides enough information for the majority of programmers to use the Modcomp computers without having to refer to any other manuals. A lot of emphasis has been placed on the file description and usage for each of the System Processors. This allows the user to understand how Modcomp MAX IV does things rather than just learning the system commands.

Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR): Part 1, Overview of NUCLARR data retrieval: User's guide

International Nuclear Information System (INIS)

Gilmore, W.E.; Gentillon, C.D.; Gertman, D.I.; Beers, G.H.; Galyean, W.J.; Gilbert, B.G.

1988-06-01

The Nuclear Computerized Library for Assessing Reactor Reliability (NUCLARR) is an automated data base management system for processing and storing human error probability and hardware component failure data. The NUCLARR system software resides on an IBM (or compatible) personal micro-computer. NUCLARR can be used by the end user to furnish data inputs for both human and hardware reliability analysis in support of a variety of risk assessment activities. The NUCLARR system is documented in a five-volume series of reports. Volume IV of this series is the User's Guide for operating the NUCLARR software and is presented in three parts. This document, Part 1: Overview of NUCLARR Data Retrieval provides an introductory overview to the system's capabilities and procedures for data retrieval. The methods and criteria for selection of data sources and entering them into the NUCLARR system are also described in this document

Empirical trials of plant field guides.

Science.gov (United States)

Hawthorne, W D; Cable, S; Marshall, C A M

2014-06-01

We designed 3 image-based field guides to tropical forest plant species in Ghana, Grenada, and Cameroon and tested them with 1095 local residents and 20 botanists in the United Kingdom. We compared users' identification accuracy with different image formats, including drawings, specimen photos, living plant photos, and paintings. We compared users' accuracy with the guides to their accuracy with only their prior knowledge of the flora. We asked respondents to score each format for usability, beauty, and how much they would pay for it. Prior knowledge of plant names was generally low (<22%). With a few exceptions, identification accuracy did not differ significantly among image formats. In Cameroon, users identifying sterile Cola species achieved 46-56% accuracy across formats; identification was most accurate with living plant photos. Botanists in the United Kingdom accurately identified 82-93% of the same Cameroonian species; identification was most accurate with specimens. In Grenada, users accurately identified 74-82% of plants; drawings yielded significantly less accurate identifications than paintings and photos of living plants. In Ghana, users accurately identified 85% of plants. Digital color photos of living plants ranked high for beauty, usability, and what users would pay. Black and white drawings ranked low. Our results show the potential and limitations of the use of field guides and nonspecialists to identify plants, for example, in conservation applications. We recommend authors of plant field guides use the cheapest or easiest illustration format because image type had limited bearing on accuracy; match the type of illustration to the most likely use of the guide for slight improvements in accuracy; avoid black and white formats unless the audience is experienced at interpreting illustrations or keeping costs low is imperative; discourage false-positive identifications, which were common; and encourage users to ask an expert or use a herbarium for

COSYMA user guide

International Nuclear Information System (INIS)

Hasemann, I.

1991-02-01

The COSYMA system for reactor accident consequence assessment (ACA) is intended to provide a flexible package which will allow users in a variety of institutions and in different European countries to investigate special problems by appropriate choice of parameter values and data sets. It has been developed to serve as a research tool for investigating and understanding the broad spectrum of accident consequences rather than to perform 'quick and easy' risk calculations. The easy access to intermediate and final results and the availability of flexible evaluation programs means that detailed parameter studies can be carried out, identifying the most important sensitivities and quantifying the essential uncertainties. COSYMA is intended also for use by people who are not specialists in the various disciplines of ACA modelling, but wish to use such a program. However, some familiarity with this area is required to enable them to make informed choices of models and parameter values for the particular application considered. Some assistance is given by providing default values for all relevant parameters, and the documents distributed together with the code will give some guidance on the appropriate choice of parameter values or simplifications of the code system for special applications. (orig./HP)

Automated Transportation Management System (ATMS) user's manual. Revision 1

International Nuclear Information System (INIS)

Smith, P.D.

1994-01-01

The Automated Transportation Management System (ATMS) Software User Guide (SUG) constitutes the user procedures for the ATMS System. Information in this document will be used by the user to operate the automated system. It is intended to be used as a reference manual to guide and direct the user(s) through the ATMS software product and its environment. The objectives of ATMS are as follows: to better support the Procurement function with freight rate information; to free Transportation Logistics personnel from routine activities such as the auditing and input of freight billing information; to comply with Headquarters Department of Energy-Inspector General (DOE-IG) audit findings to automate transportation management functions; to reduce the keying of data into the Shipment Mobility Accountability Collection (SMAC) database; and to provide automation for the preparing of Bill of Lading, Declaration of Dangerous Goods, Emergency Response Guide and shipping Labels using HM181 Retrieval of hazardous material table text information

User`s guide and documentation manual for ``PC-Gel`` simulator

Energy Technology Data Exchange (ETDEWEB)

Chang, Ming-Ming; Gao, Hong W.

1993-10-01

PC-GEL is a three-dimensional, three-phase (oil, water, and gas) permeability modification simulator developed by incorporating an in-situ gelation model into a black oil simulator (BOAST) for personal computer application. The features included in the simulator are: transport of each chemical species of the polymer/crosslinker system in porous media, gelation reaction kinetics of the polymer with crosslinking agents, rheology of the polymer and gel, inaccessible pore volume to macromolecules, adsorption of chemical species on rock surfaces, retention of gel on the rock matrix, and permeability reduction caused by the adsorption of polymer and gel. The in-situ gelation model and simulator were validated against data reported in the literature. The simulator PC-GEL is useful for simulating and optimizing any combination of primary production, waterflooding, polymer flooding, and permeability modification treatments. A general background of permeability modification using crosslinked polymer gels is given in Section I and the governing equations, mechanisms, and numerical solutions of PC-GEL are given in Section II. Steps for preparing an input data file with reservoir and gel-chemical transport data, and recurrent data are described in Sections III and IV, respectively. Example data inputs are enclosed after explanations of each input line to help the user prepare data files. Major items of the output files are reviewed in Section V. Finally, three sample problems for running PC-GEL are described in Section VI, and input files and part of the output files of these problems are listed in the appendices. For the user`s reference a copy of the source code of PC-GEL computer program is attached in Appendix A.

Status of Coral Communities in American Samoa: A Re-survey of Long-term Monitoring Sites in 2002 (NODC Accession 0001470)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set consists of an MS Word file which documents and summarizes data previously submitted as MS Excel spreadsheets to the NOAA data centers, NODC ACCESSION...

Surveys of Selected Coral and Fish Assemblages Adjacent to the Waianae Ocean Outfall, Oahu, Hawaii, 2003-2010 (NODC Accession 0084515)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Since 1990, biota of the coral reef ecosystems have been annualy monitored at stations located at and in the vicinity of the Waianae Ocean Sewage Outfall. NODC...

Eukaryotic systematics: a user's guide for cell biologists and parasitologists.

Science.gov (United States)

Walker, Giselle; Dorrell, Richard G; Schlacht, Alexander; Dacks, Joel B

2011-11-01

Single-celled parasites like Entamoeba, Trypanosoma, Phytophthora and Plasmodium wreak untold havoc on human habitat and health. Understanding the position of the various protistan pathogens in the larger context of eukaryotic diversity informs our study of how these parasites operate on a cellular level, as well as how they have evolved. Here, we review the literature that has brought our understanding of eukaryotic relationships from an idea of parasites as primitive cells to a crystallized view of diversity that encompasses 6 major divisions, or supergroups, of eukaryotes. We provide an updated taxonomic scheme (for 2011), based on extensive genomic, ultrastructural and phylogenetic evidence, with three differing levels of taxonomic detail for ease of referencing and accessibility (see supplementary material at Cambridge Journals On-line). Two of the most pressing issues in cellular evolution, the root of the eukaryotic tree and the evolution of photosynthesis in complex algae, are also discussed along with ideas about what the new generation of genome sequencing technologies may contribute to the field of eukaryotic systematics. We hope that, armed with this user's guide, cell biologists and parasitologists will be encouraged about taking an increasingly evolutionary point of view in the battle against parasites representing real dangers to our livelihoods and lives.

Guide to research facilities

Energy Technology Data Exchange (ETDEWEB)

1993-06-01

This Guide provides information on facilities at US Department of Energy (DOE) and other government laboratories that focus on research and development of energy efficiency and renewable energy technologies. These laboratories have opened these facilities to outside users within the scientific community to encourage cooperation between the laboratories and the private sector. The Guide features two types of facilities: designated user facilities and other research facilities. Designated user facilities are one-of-a-kind DOE facilities that are staffed by personnel with unparalleled expertise and that contain sophisticated equipment. Other research facilities are facilities at DOE and other government laboratories that provide sophisticated equipment, testing areas, or processes that may not be available at private facilities. Each facility listing includes the name and phone number of someone you can call for more information.

User guide for the Polaris powder diffractometer at ISIS

International Nuclear Information System (INIS)

Smith, R.I.; Hull, S.

1997-09-01

Version 3.0 of the Polaris User Guide has been produced to coincide with the move of the instrument onto ISIS beamline N7. The new instrument has been built to an almost identical specification as the old, however the ability to start from scratch on a new beamline has allowed certain aspects of Polaris to be optimised. Polaris on beamline N7 retains its four discrete detector banks, situated at backscattering angles, 90 degrees, low angles and very low angles. During the instrument move the Polaris detector complement was increased, with 20 3 He tubes added to the backscattering detector bank and a further two ZnS scintillator modules added to the 90 degrees detector bank. This has approximately doubled the count rate of the backscattering bank, whereas in the 90 degrees bank the detectors have been moved further from the sample resulting in an improvement in resolution while maintaining the count rate. Finally, the geometry of the four ZnS scintillator detector modules in the very low angle bank was altered slightly to improve the performance of this bank. The most significant change in the new Polaris, however is the redesign of the instrument blockhouse. Access to the sample position is now at floor level, and no longer requires entry into the blockhouse. With only a small enclosure built around the sample position sample environment equipment, such as furnaces and cryostats, can be operated in a much more convenient and flexible manner. (Author)

GOCE user toolbox and tutorial

DEFF Research Database (Denmark)

Knudsen, Per; Benveniste, Jerome

2011-01-01

consists of a series of advanced computer routines that carry out the required computations. It may be used on Windows PCs, UNIX/Linux Workstations, and Mac. The toolbox is supported by The GUT Algorithm Description and User Guide and The GUT Install Guide. A set of a-priori data and models are made...

NASA AVOSS Fast-Time Models for Aircraft Wake Prediction: User's Guide (APA3.8 and TDP2.1)

Science.gov (United States)

Ahmad, Nash'at N.; VanValkenburg, Randal L.; Pruis, Matthew J.; Limon Duparcmeur, Fanny M.

2016-01-01

NASA's current distribution of fast-time wake vortex decay and transport models includes APA (Version 3.8) and TDP (Version 2.1). This User's Guide provides detailed information on the model inputs, file formats, and model outputs. A brief description of the Memphis 1995, Dallas/Fort Worth 1997, and the Denver 2003 wake vortex datasets is given along with the evaluation of models. A detailed bibliography is provided which includes publications on model development, wake field experiment descriptions, and applications of the fast-time wake vortex models.

A user's guide to ellipsometry

CERN Document Server

Tompkins, Harland G

1992-01-01

This book is specifically designed for the user who wishes expanded use of ellipsometry beyond the relatively limited number of turn-key applications. The book provides a concise discussion of theory and instrumentation before describing how to use optical parameters to determine material properties and optical parameters for inaccessible substrates and unknown films, and how to measure extremely thin films. The book also addresses polysilicon, a material commonly used in the microelectronics industry, and the effect of substrate roughness. This book's concepts and applications are reinforced

SAPHIRE 8 Volume 3 - Users' Guide

Energy Technology Data Exchange (ETDEWEB)

C. L. Smith; K. Vedros; K. J. Kvarfordt

2011-03-01

The Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) is a software application developed for performing a complete probabilistic risk assessment (PRA) using a personal computer. SAPHIRE is funded by the U.S. Nuclear Regulatory Commission (NRC) and developed by the Idaho National Laboratory (INL). The INL's primary role in this project is that of software developer. However, the INL also plays an important role in technology transfer by interfacing and supporting SAPHIRE users comprised of a wide range of PRA practitioners from the NRC, national laboratories, the private sector, and foreign countries. SAPHIRE can be used to model a complex system’s response to initiating events, quantify associated damage outcome frequencies, and identify important contributors to this damage (Level 1 PRA) and to analyze containment performance during a severe accident and quantify radioactive releases (Level 2 PRA). It can be used for a PRA evaluating a variety of operating conditions, for example, for a nuclear reactor at full power, low power, or at shutdown conditions. Furthermore, SAPHIRE can be used to analyze both internal and external initiating events and has special features for transforming models built for internal event analysis to models for external event analysis. It can also be used in a limited manner to quantify risk in terms of release consequences to both the public and the environment (Level 3 PRA). This reference guide will introduce the SAPHIRE Version 8.0 software. A brief discussion of the purpose and history of the software is included along with general information such as installation instructions, starting and stopping the program, and some pointers on how to get around inside the program. Next, database concepts and structure are discussed. Following that discussion are nine sections, one for each of the menu options on the SAPHIRE main menu, wherein the purpose and general capabilities for each option are

Traffic Generator (TrafficGen) Version 1.4.2: Users Guide

Science.gov (United States)

2016-06-01

the network with Transmission Control Protocol and User Datagram Protocol Internet Protocol traffic. Each node generating network traffic in an...TrafficGen Graphical User Interface (GUI) 3 3.1 Anatomy of the User Interface 3 3.2 Scenario Configuration and MGEN Files 4 4. Working with...for public release; distribution is unlimited. vi List of Figures Fig. 1 TrafficGen user interface

Temperature and salinity measurements taken by instrumented elephant seals (SEaOS) from 2004-02-24 to 2007-01-17 (NODC Accession 0012881)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature and salinity measurements taken from elephant seals in the Antarctic, Coastal South Indian Ocean and other locations from 2004 to 2006 (NODC Accession...

User's guide for PRISM (Plant Risk Status Information Management System) Arkansas Nuclear One-Unit 1: Volume 1, Program for inspectors

International Nuclear Information System (INIS)

Campbell, D.J.; Guthrie, V.H.; Kirchner, J.R.; Kirkman, J.Q.; Paula, H.M.; Ellison, B.C.; Dycus, F.M.; Farquharson, J.A.; Flanagan, G.F.

1988-03-01

This user's guide is a two-volume document designed to teach NRC inspectors and NRC regulators how to access probabilistic risk assessment information from the two Plant Risk Status Information Management System (PRISIM) programs developed for Arkansas Nuclear One -- Unit One (ANO-1). This document, Volume 1, describes how the PRA information available in Version 1.0 of PRISIM is useful for planning inspections. Using PRISIM, inspectors can quickly access PRA information and use that information to update risk analysis results, reflecting a plant's status at any particular time. Both volumes are stand-alone documents, and each volume presents several sample computer sessions designed to lead the user through a variety of PRISIM applications used to obtain PRA-related information for monitoring and controlling plant risk

Casbar User’s Guide

Science.gov (United States)

2009-11-01

investigating intermediate bal- listics, and can alternatively be used as a general compressible flow solver. Casbar supports user- customised types of...gas density in kg/m3 • u: is x-velocity of the gas in m/s • v: is y-velocity of the gas in m/s • mf: is a list of component mass fractions. The values...condition for each grain type even if that condition is None. When the program receives None it will put zero mass of that grain type in the flow condition

PEDRO (Petroleum Electronic Data Reporting Option) user guide

Energy Technology Data Exchange (ETDEWEB)

1990-11-01

PEDRO is an electronic data communications product that simplifies filing and transmission of petroleum survey data. Your burden is significantly reduced as PEDRO eliminates paperwork, provides immediate onsite correction of data errors, and reduces the need for followup calls and survey resubmission. PEDRO provides an online error-checking process that highlights discrepancies. This permits you to enter and check data before transmitting to EIA. EIA then combines and reformats the data from different users for use by analytical and reporting programs. PEDRO is available at no cost to the user. Formal training is not required since installation, data processing, and transmission are done by interactive, user-friendly menu options. The PEDRO system is divided into three functions: (1) data processing, (2) transmitting data to EIA, and (3) EIA processing. 28 figs.

SYMPAL: user guide

International Nuclear Information System (INIS)

Simpson, J.A.; Sublet, J.-Ch.; Nierop, D.

1997-02-01

The processing code SYMPAL is used to perform the data handling involved in creating a new version of the European Activation File (EAF). The process is handled by different modules of the code in a sequential and orderly manner. The modular code system accesses, translates and processes cross section data from a wide variety of libraries and calculations with nuclear model codes. Two major data bases are accessed and merged so as to create a new version of a library. The Master Data File (MDF) contains the original cross section data extracted, unmodified but reformatted, from numerous sources. A set of input (ASCII) tables, which form a compilation of all physical information necessary to renormalise, split into isomeric states and internally validate any particular type of cross section, are then read by SYMPAL and used to produce a second database: the Master Parameter File (MPF). The combination of these two files generates a new activation library in pointwise and various groupwise formats. This guide describes all aspects of the SYMPAL code, starting with the basic operating environment, compilation of the code and directory structure. Details of how to use SYMPAL to produce an activation library are then explained, along with instructions and examples of how to use each module of the code. Finally details of the MPF format, listings of some parts of the code and the input (ASCII) tables are provided. (author)

Numerical simulation of dynamics of brushless dc motors for aerospace and other applications. Volume 2: User's guide to computer EMA model

Science.gov (United States)

Demerdash, N. A. O.; Nehl, T. W.

1979-01-01

A description and user's guide of the computer program developed to simulate the dynamics of an electromechanical actuator for aerospace applications are presented. The effects of the stator phase currents on the permanent magnets of the rotor are examined. The voltage and current waveforms present in the power conditioner network during the motoring, regenerative braking, and plugging modes of operation are presented and discussed.

ABCASH plotting program users guide

International Nuclear Information System (INIS)

Troyer, G.L.

1995-01-01

The Automated Bar Coding of Air Samples at Hanford (ABCASH) system provides an integrated data collection, sample tracking, and data reporting system for radioactive particulate air filter samples. The ABCASH plotting program provides a graphical trend report for ABCASH of the performance of air sample results. This document provides an operational guide for using the program. Based on sample location identifier and date range, a trend chart of the available data is generated. The trend chart shows radiological activity versus time. General indications of directional trend of the concentrations in air over time may be discerned. Comparison limit set point values are also shown as derived from the ABCASH data base

SAGE 1 data user's guide

International Nuclear Information System (INIS)

Mcmaster, L.R.; Chu, W.P.; Rowland, M.W.

1992-08-01

A guide for using the data products from the Stratospheric Aerosol and Gas Experiment 1 (SAGE 1) for scientific investigations of stratospheric chemistry related to aerosol, ozone, nitrogen dioxide, dynamics, and climate change is presented. A detailed description of the aerosol profile tape, the ozone profile tape, and the nitrogen dioxide profile tape is included. These tapes are the SAGE 1 data products containing aerosol extinction data and ozone and nitrogen dioxide concentration data for use in the different scientific investigations. Brief descriptions of the instrument operation, data collection, processing, and validation, and some of the scientific analyses that were conducted are also included

Human factors guides

International Nuclear Information System (INIS)

Penington, J.

1995-10-01

This document presents human factors guides, which have been developed in order to provide licensees of the AECB with advice as to how to address human factors issues within the design and assessment process. This documents presents the results of a three part study undertaken to develop three guides which are enclosed in this document as Parts B, C and D. As part of the study human factors standards, guidelines, handbooks and other texts were researched, to define those which would be most useful to the users of the guides and for the production of the guides themselves. Detailed specifications were then produced to outline the proposed contents and format of the three guides. (author). 100 refs., 3 tabs., 11 figs

Human factors guides

Energy Technology Data Exchange (ETDEWEB)

Penington, J [PHF Services Inc., (Canada)

1995-10-01

This document presents human factors guides, which have been developed in order to provide licensees of the AECB with advice as to how to address human factors issues within the design and assessment process. This documents presents the results of a three part study undertaken to develop three guides which are enclosed in this document as Parts B, C and D. As part of the study human factors standards, guidelines, handbooks and other texts were researched, to define those which would be most useful to the users of the guides and for the production of the guides themselves. Detailed specifications were then produced to outline the proposed contents and format of the three guides. (author). 100 refs., 3 tabs., 11 figs.

The Xdataviewer Programmer's and User's Guide

CERN Document Server

Morpurgo, G

1999-01-01

This report describes in detail all the features of the Xdataviewer, a software graphical package developed in the CERN/SL Division and widely used in the LEP and SPS Control Rooms.Goal of the Xdataviewer is to help the Application Programmers to present numerical data both in graphical or in alphanumerical format, and Users to look at these data and to possibly interact with them. Sophisticated built-in Zoom and Data Editing capabilities are implemented, as well as a flexible Data Output generation facility. A complete C Callable Interface is provided, including routines to inform the Application Program about the User's interaction with the displayed data. The data to be displayed, formatted using the MOPS[1] formalism, can be contained in a Unix shared memory, or in a file, or can be found on the Web. The package has been written in C on a Unix HP_UX platform, making use of the standard X Window libraries (Xlib, Xt, Motif). It can be either run as a stand alone process, or it can be embedded in the Applica...

Cloud amount/frequency, NITRATE and other data from unknown platforms from 1975-01-18 to 1975-02-23 (NODC Accession 7900147)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Water depth and other data from 18 January 1975 to 23 February 1975. Data were collected by National Ocean Data Center (NODC) as part of the International Decade of...

User's guide to the western spruce budworm modeling system

Science.gov (United States)

Nicholas L. Crookston; J. J. Colbert; Paul W. Thomas; Katharine A. Sheehan; William P. Kemp

1990-01-01

The Budworm Modeling System is a set of four computer programs: The Budworm Dynamics Model, the Prognosis-Budworm Dynamics Model, the Prognosis-Budworm Damage Model, and the Parallel Processing-Budworm Dynamics Model. Input to the first three programs and the output produced are described in this guide. A guide to the fourth program will be published separately....

Oceanographic profile Temperature, Salinity, and pressure measurements collected using profiling floats in the World Ocean from 1950 to 2006 (NODC Accession 0010599)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The U.S. National Oceanographic Data Center (NODC) operates the Global Argo Data Repository (GADR) as the long-term archive for the International Global Argo Project...

TOUGH2 User's Guide Version 2

Energy Technology Data Exchange (ETDEWEB)

Pruess, K.; Oldenburg, C.M.; Moridis, G.J.

1999-11-01

TOUGH2 is a numerical simulator for nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. The chief applications for which TOUGH2 is designed are in geothermal reservoir engineering, nuclear waste disposal, environmental assessment and remediation, and unsaturated and saturated zone hydrology. TOUGH2 was first released to the public in 1991; the 1991 code was updated in 1994 when a set of preconditioned conjugate gradient solvers was added to allow a more efficient solution of large problems. The current Version 2.0 features several new fluid property modules and offers enhanced process modeling capabilities, such as coupled reservoir-wellbore flow, precipitation and dissolution effects, and multiphase diffusion. Numerous improvements in previously released modules have been made and new user features have been added, such as enhanced linear equation solvers, and writing of graphics files. The T2VOC module for three-phase flows of water, air and a volatile organic chemical (VOC), and the T2DM module for hydrodynamic dispersion in 2-D flow systems have been integrated into the overall structure of the code and are included in the Version 2.0 package. Data inputs are upwardly compatible with the previous version. Coding changes were generally kept to a minimum, and were only made as needed to achieve the additional functionalities desired. TOUGH2 is written in standard FORTRAN77 and can be run on any platform, such as workstations, PCs, Macintosh, mainframe and supercomputers, for which appropriate FORTRAN compilers are available. This report is a self-contained guide to application of TOUGH2 to subsurface flow problems. It gives a technical description of the TOUGH2 code, including a discussion of the physical processes modeled, and the mathematical and numerical methods used. Illustrative sample problems are presented along with detailed instructions for preparing input data.

User-Centred BCI Videogame Design

OpenAIRE

Loup-Escande , Emilie; Lotte , Fabien; Loup , Guillaume; Lécuyer , Anatole

2015-01-01

International audience; This chapter aims to offer a user-centred methodological framework to guide the design and evaluation of Brain-Computer Interface videogames. This framework is based on the contributions of ergonomics to ensure these games are well suited for their users (i.e., players). It provides methods, criteria and metrics to complete the different phases required by ae human-centred design process. This aims to understand the context of use, specify the user needs and evaluate t...

The Internet for Educators: A User's Guide.

Science.gov (United States)

Monahan, Brian D.; Dharm, Matthew

1995-01-01

Presents a practical guide to use of the Internet. Topics discussed include getting connected; the UNIX operating system; electronic mail; FTP (File Transfer Protocol); Finger; Telnet; Archie; Veronica; Gopher; teacher education; the Yanoff List; and expansion of the Internet. (three references) (LRW)

Bottle profile data collected aboard the USCGC SENECA in the Atlantic Ocean from 2 April 1915 to 20 May 1915 (NODC Accession 9700096)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 9700096 contains temperature and salinity profile data from bottle casts collected aboard the USCGC Seneca in the Grand Banks of Newfoundland and...

User's Guide for Mixed-Size Sediment Transport Model for Networks of One-Dimensional Open Channels

Science.gov (United States)

Bennett, James P.

2001-01-01

This user's guide describes a mathematical model for predicting the transport of mixed sizes of sediment by flow in networks of one-dimensional open channels. The simulation package is useful for general sediment routing problems, prediction of erosion and deposition following dam removal, and scour in channels at road embankment crossings or other artificial structures. The model treats input hydrographs as stepwise steady-state, and the flow computation algorithm automatically switches between sub- and supercritical flow as dictated by channel geometry and discharge. A variety of boundary conditions including weirs and rating curves may be applied both external and internal to the flow network. The model may be used to compute flow around islands and through multiple openings in embankments, but the network must be 'simple' in the sense that the flow directions in all channels can be specified before simulation commences. The location and shape of channel banks are user specified, and all bedelevation changes take place between these banks and above a user-specified bedrock elevation. Computation of sediment-transport emphasizes the sand-size range (0.0625-2.0 millimeter) but the user may select any desired range of particle diameters including silt and finer (user may set the original bed-sediment composition of any number of layers of known thickness. The model computes the time evolution of total transport and the size composition of bed- and suspended-load sand through any cross section of interest. It also tracks bed -surface elevation and size composition. The model is written in the FORTRAN programming language for implementation on personal computers using the WINDOWS operating system and, along with certain graphical output display capability, is accessed from a graphical user interface (GUI). The GUI provides a framework for selecting input files and parameters of a number of components of the sediment-transport process. There are no restrictions in the

Guided Expectations: A Case Study of a Sound Collage Audio Guide

DEFF Research Database (Denmark)

Laursen, Ditte

This paper is a user evaluation of a mobile phone audio guide developed for visitors to use at the National Gallery of Denmark. The audio guide is offered as a downloadable MP3 file to every incoming visitor who is carrying a mobile phone with an open Bluetooth connection. The guide itself...... according to personal interest, and a conflict between the expectation of a learning experience rather than an aesthetic experience. Results indicate that most visitors are able to make sense of the guide and to use it successfully, in different ways, to enrich their visit. Evaluation also shows...... that visitors are fond of using their own mobile phones - but they have several problems with their phones in downloading the MP3 file. Read more: Guided Expectations: A Case Study of a Sound Collage Audio Guide | conference.archimuse.com...

Guidelines for the verification and validation of expert system software and conventional software: User`s manual. Volume 7

Energy Technology Data Exchange (ETDEWEB)

Mirsky, S.M.; Hayes, J.E.; Miller, L.A. [Science Applications International Corp., McLean, VA (United States)

1995-03-01

This report provides a step-by-step guide, or user manual, for personnel responsible for the planning and execution of the verification and validation (V&V), and developmental testing, of expert systems, conventional software systems, and various other types of artificial intelligence systems. While the guide was developed primarily for applications in the utility industry, it applies well to all industries. The user manual has three sections. In Section 1 the user assesses the stringency of V&V needed for the system under consideration, identifies the development stage the system is in, and identifies the component(s) of the system to be tested next. These three pieces of information determine which Guideline Package of V&V methods is most appropriate for those conditions. The V&V Guideline Packages are provided in Section 2. Each package consists of an ordered set of V&V techniques to be applied to the system, guides on choosing the review/evaluation team, measurement criteria, and references to a book or report which describes the application of the method. Section 3 presents details of 11 of the most important (or least well-explained in the literature) methods to assist the user in applying these techniques accurately.

Users Guide for the Strategic Thinking Mindset Test (STMT)

Science.gov (United States)

2017-06-01

practice of strategic thinking , both in an Army context and in the broader domain of organizational management. The diverse body of literature...Research Product 2018-02 User’s Guide for the Strategic Thinking Mindset Test (STMT) William S. Weyhrauch Consortium...COVERED (from. . . to) Sept 2012 – May 2016 4. TITLE AND SUBTITLE User’s Guide for the Strategic Thinking Mindset Test (STMT) 5a. CONTRACT OR

Visualization system on the earth simulator user's guide

International Nuclear Information System (INIS)

Muramatsu, Kazuhiro; Sai, Kazunori

2002-08-01

A visualization system on the Earth Simulator is developed. The system enables users to see a graphic representation of simulation results on a client terminal simultaneously with them being computed on the Earth Simulator. Moreover, the system makes it possible to change parameters of the calculation and its visualization in the middle of calculation. The graphical user interface (GUI) of the system is constructed on a Java applet. Consequently, the client only needs a web browser, so it is independent of operating systems. The system consists of a server function, post-processing function and client function. The server and post-processing functions work on the Earth Simulator, and the client function works on the client terminal. The server function employs a library style format so that users can easily invoke real-time visualization functions by applying their code. The post-processing function employs a library style format and moreover provides a load module. This report describes mainly the usage of the server and post-processing functions. (author)

User's manual for the master equipment list. Phase 1

International Nuclear Information System (INIS)

Sandoval, J.D.

1997-01-01

This manual is intended to provide a user with enough detailed instruction to guide them through the Master Equipment List Phase 1 (MEL Phase 1) application system operations. The MEL Phase 1 application is a database system that stores Equipment Identification Number (EIN) information to support equipment tracking in the 200E and 200W Tank Farms for the Tank Waste Remediation System Division. The MEL Phase 1 application supports both the user application and administrative control functions. The user application functions include: viewing by Folder, reporting, performing queries, and editing specific data. The administrative control functions include: maintaining valid user identifications, passwords, privileges, defining drop-down lists, and review of the change log relating to EIN data entries, additions, deletions, and editing. The scope of this User's Manual is to discuss these functions and is intended to guide users and answer questions regarding the MEL Phase 1 application

User's guide for the implementation of level one of the proposed American National Standard Specifications for an information interchange data descriptive file on control data 6000/7000 series computers

CERN Document Server

Wiley, R A

1977-01-01

User's guide for the implementation of level one of the proposed American National Standard Specifications for an information interchange data descriptive file on control data 6000/7000 series computers

and Epigenetic Dysregulation in Diabetes-prone Bicongenic B6.NODC11bxC1tb Mice

Directory of Open Access Journals (Sweden)

Erin Garrigan

2015-01-01

Full Text Available In Type 1 diabetic (T1D human monocytes, STAT5 aberrantly binds to epigenetic regulatory sites of two proinflammatory genes, CSF2 (encoding granulocyte–macrophage colony-stimulating factor and PTGS2 (encoding prostaglandin synthase 2/cyclooxygenase 2. Bicongenic B6.NOD C11bxC1tb mice re-create this phenotype of T1D monocytes with only two nonobese diabetic (NOD Idd subloci (130.8 Mb–149.7 Mb, of Idd5 on Chr 1 and 32.08–53.85 Mb of Idd4.3 on Chr11 on C57BL/6 genetic background. These two Idd loci interact through STAT5 binding at upstream regulatory regions affecting Csf2 ( Chr 11 and Ptgs2 ( Chr 1 expression. B6.NODC11bxC1tb mice exhibited hyperglycemia and immune destruction of pancreatic islets between 8 and 30 weeks of age, with 12%–22% penetrance. Thus, B6.NODC11bxC1tb mice embody NOD epigenetic dysregulation of gene expression in myeloid cells, and this defect appears to be sufficient to impart genetic susceptibility to diabetes in an otherwise genetically nonautoimmune mouse.

Oceanographic temperature and salinity measurements collected using CTD and XBT from URANIA in the Mediterranean Sea from 2001 to 2002 (NODC Accession 0043698)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, tritium and other measurements found in datasets XBT and CTD taken from the URANIA (Call sign IQSU) in the Mediteranean from 2001 to 2002 (NODC...

User's guide for Reactor Incident Root Cause Coding Tree

International Nuclear Information System (INIS)

Busch, D.A.; Paradies, M.W.

1986-01-01

The Reactor Incident (RI) Cause Coding Tree is designed to allow identification of root causes of RI's, thereby leading to trending of useful information and developing of corrective actions to prevent recurrence. This guide explains the terminology of the RI Cause Coding Tree and how to use the tree. Using this guide for cause coding is stressed to allow consistency of coding among all RI investigators. 8 figs

User's guide : pavement marking management system database.

Science.gov (United States)

2011-12-01

Pavement markings play a critical role in maintaining a safe and efficient driving environment for road users, especially during nighttime conditions. The Texas Department of Transportation (TxDOT) spends millions of dollars each year for installatio...

User's guide for remote access of the Performance Assessment Center

International Nuclear Information System (INIS)

Peterson, C.R.; Kostelnik, K.M.

1991-03-01

The Performance Assessment Center (PAC) was established by the Department of Energy's National Low-Level Waste Management Program to provide technical assistance to support the development of low-level radioactive waste disposal facilities. This user's manual provides guidance to remote users of the PAC. Information is presented on how remote users may most effectively access and use the systems available at the Performance Assessment Center in Idaho Falls, Idaho. Access requirements and operating procedures are presented to assist the first-time PAC user. This manual also provides brief descriptions of each code available on the system

Oceanographic profile temperature and salinity measurements collected using bottle from the STEFAN MALYGIN and SAMOED in the Arctic in 1931 (NODC Accession 0001090)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, salinity, and meteorology data received at NODC on 05/02/03 by Igor Smolyar from the personal library of Dr. Aleksey Zuyev, Murmansk Branch of the...

Oceanographic profile temperature, salinity, oxygen, nutrients, and plankton measurements collected using bottle from the Parizeau in the North Pacific Ocean (NODC Accession 0002242)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, salinity, oxygen and other profile data received at NODC on 09/09/04 by Sydney Levitus from the Institute of Ocean Sciences (Sidney, B.C.), digitized...

Common Graphics Library (CGL). Volume 1: LEZ user's guide

Science.gov (United States)

Taylor, Nancy L.; Hammond, Dana P.; Hofler, Alicia S.; Miner, David L.

1988-01-01

Users are introduced to and instructed in the use of the Langley Easy (LEZ) routines of the Common Graphics Library (CGL). The LEZ routines form an application independent graphics package which enables the user community to view data quickly and easily, while providing a means of generating scientific charts conforming to the publication and/or viewgraph process. A distinct advantage for using the LEZ routines is that the underlying graphics package may be replaced or modified without requiring the users to change their application programs. The library is written in ANSI FORTRAN 77, and currently uses a CORE-based underlying graphics package, and is therefore machine independent, providing support for centralized and/or distributed computer systems.

User's guide to ESME v. 7.1

International Nuclear Information System (INIS)

Stahl, S.; MacLachlan, J.

1990-01-01

ESME is a computer program to calculate the evolution of a distribution of particles in energy and azimuth as it is acted upon by the radiofrequency system of a proton synchrotron. It provides for the modeling of multiple rf systems, feedback control, spacecharge, and many of the effects of longitudinal coupling impedance. The capabilities of the program are described, and the requirements for input data are specified in sufficient detail to permit significant calculations by an uninitiated user. The program is currently at version 7.1 and extensively modified since the previous user documentation. Fundamental enhancements make version 6 data unusable, but nearly all facilities of the earlier version have been retained and input data is similar. Also described is a VAX-based code management convention which has been established with a view to maintaining functional equivalence in versions used on different computers. 13 refs

Expressão dos genes nodC, nodW e nopP em Bradyrhizobium japonicum estirpe CPAC 15 avaliada por RT-qPCR Expression of nodC, nodW and nopP genes in Bradyrhizobium japonicum CPAC 15 strain evaluated by RT-qPCR

Directory of Open Access Journals (Sweden)

Simone Bortolan

2009-11-01

Full Text Available O objetivo deste trabalho foi avaliar a expressão, por RT-qPCR, dos genes de nodulação nodC e nodW e do gene nopP da estirpe CPAC 15, que provavelmente atuam na infecção das raízes da soja. Foram realizados dois experimentos. No primeiro, a expressão dos genes foi avaliada nas células após a incubação com genisteína por 15 min, 1, 4 e 8 horas. Os resultados revelaram que os três genes apresentaram maior expressão imediatamente após o contato com o indutor (15 min. No segundo experimento, a bactéria foi cultivada na presença de indutores (genisteína ou exsudatos de sementes de soja por 48 horas. A expressão dos três genes foi maior na presença de genisteína, com valores de expressão para nodC, nodW e nopP superiores ao controle. Os resultados obtidos confirmam a funcionalidade dos três genes na estirpe CPAC 15, com ênfase para o nopP, cuja funcionalidade em Bradyrhizobium japonicum foi descrita pela primeira vez.The objective of this work was to evaluate, by RT-qPCR, the expression of the nodC and nodW nodulation genes and of the nopP gene of the CPAC 15 strain, which probably play a role in the infection of soybean roots. Two experiments were done. In the first, the gene expression was evaluated in cells after incubation with genistein for 15 min, 1, 4 and 8 hours. Results showed that the three genes showed higher expression immediately after contact with the inducer (15 min. In the second experiment, the bacterium was grown in the presence of inducers (genistein or soybean seed exudates for 48 hours. The expression of the three genes was greater when induced by genistein, and the expression of nodC, nodW and nopP had higher values than the control. The results confirm the functionality of the three genes in the CPAC 15 strain, with an emphasis on the nopP, whose functionality in Bradyrhizobium japonicum was described for the first time.

A Tourism e-Guide System Using Mobile Integration

Directory of Open Access Journals (Sweden)

Emad M. Abuelrub

2010-04-01

Full Text Available This paper presents a tourism e-guide system via mobile integration using offloading while enjoying mobility. A user can search for new mobile services available on the website to use either remotely on the server where the services resides, or locally after downloading them to his/her mobile device and work offline without a mobile connection. Jordan Tourism e-Guide System (JTeGS aims to help the user/tourist accessing the tourism information directly from his/her smart device, anytime and anywhere using offloading. JTeGS is a web-based electronic guide that provides the user with appropriate tourism information about Jordan and guides him/her to find the best places to party, eat out, and enjoy culture events. The system architecture and the main components of the proposed services were presented and discussed. The system has been prototyped and validated in a real-time mobile internet application scenario. The system also has been evaluated through simulations in mobile network environment. Both experimental and simulation results demonstrated the effectiveness and efficiency of the proposed system.

WAVE DIRECTION and Other Data from UNKNOWN PLATFORMS and Other Platforms From South China Sea (Nan Hai) and Others from 19590110 to 19761231 (NODC Accession 8600383)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Peoples Republic of China, Institute of Marine Scientific and Technological Information provided NODC with historical oceanographic data. Two original tapes...

My fuel treatment planner: a user guide.

Science.gov (United States)

Robin L. Biesecker; Roger D. Fight

2006-01-01

My Fuel Treatment Planner (MyFTP) is a tool for calculating and displaying the financial costs and potential revenues associated with forest fuel reduction treatments. It was designed for fuel treatment planners including those with little or no background in economics, forest management, or timber sales. This guide provides the information needed to acquire, load, and...

Software and commands on VAX CERN. User's guide

International Nuclear Information System (INIS)

Balashov, V.K.; Trofimov, V.V.

1990-01-01

This guide describes a structure of applications software, which is available at VAX-type computers in JINR. The software includes program libraries, scientific programs and commands developed at CERN. 20 refs

User's guide for the small-angle neutron scattering facility

International Nuclear Information System (INIS)

Vlak, W.A.H.M.; Werkhoven, E.J.

1989-04-01

This report serves as a manual for the users of the small-angle neutron scattering instrument located at beamport HB3 of the High Flux Reactor in Petten. The main part of the text is devoted to the control of the facility and the data handling by means of a μVAX computer. Also, the various possibilities to access the facility across computer networks are discussed. A collection of menu-driven and command-driven programs, which utilize the flexibility of the VMS operating system without requiring detailed knowledge of the user about the computer environment, enables to control the instrument. For the convenience of the experienced user, who might wish to update or extend the software, a technical supplement is included. 15 figs.; 8 refs

Dynamic energy conservation model REDUCE. Extension with experience curves, energy efficiency indicators and user's guide

International Nuclear Information System (INIS)

Uyterlinde, M.A.; Rijkers, F.A.M.

1999-12-01

The main objective of the energy conservation model REDUCE (Reduction of Energy Demand by Utilization of Conservation of Energy) is the evaluation of the effectiveness of economical, financial, institutional, and regulatory measures for improving the rational use of energy in end-use sectors. This report presents the results of additional model development activities, partly based on the first experiences in a previous project. Energy efficiency indicators have been added as an extra tool for output analysis in REDUCE. The methodology is described and some examples are given. The model has been extended with a method for modelling the effects of technical development on production costs, by means of an experience curve. Finally, the report provides a 'users guide', by describing in more detail the input data specification as well as all menus and buttons. 19 refs

GRAFLAB 2.3 for UNIX - A MATLAB database, plotting, and analysis tool: User`s guide

Energy Technology Data Exchange (ETDEWEB)

Dunn, W.N.

1998-03-01

This report is a user`s manual for GRAFLAB, which is a new database, analysis, and plotting package that has been written entirely in the MATLAB programming language. GRAFLAB is currently used for data reduction, analysis, and archival. GRAFLAB was written to replace GRAFAID, which is a FORTRAN database, analysis, and plotting package that runs on VAX/VMS.

User's guide to GASPAR code (a computer program for calculating radiation exposure to man from routine air releases of nuclear reactor effluents). Technical report

International Nuclear Information System (INIS)

Eckerman, K.F.; Congel, F.J.; Roecklein, A.K.; Pasciak, W.J.

1980-06-01

The document is a user's guide for the GASPAR code, a computer program written for the evaluation of radiological impacts due to the release of radioactive material to the atmosphere during normal operation of light water reactors. The GASPAR code implements the radiological impact models of NRC Regulatory Guide 1.109, Revision 1, for atmospheric releases. The code is currently used by NRC in reactor licensing evaluations to estimate (1) the collective or population dose to the population within a 50-mile radius of a facility, (2) the total collective dose to the U.S. population, and (3) the maximum individual doses at selected locations in the vicinity of the plant

A Digital Simulation Model of Message Handling in the Tactical Operations System. V. User’s Guide to the Integrated MANMOD/CASE/SAMTOS Computer Simulation

Science.gov (United States)

1979-10-01

prescribed as well as alternative personnel and equipment configurations. This user’s guide is a companion to ARI Technical Report 413 (Volume IV...Library I Medrchn Chef C E.R.P.A.-Arsenal. TouioneNaval France 2 USA Aviation Test Bd. Ft Rucker. ATTN: STEBO-PO I P.... Scientific Off. Aptil Hfum

Space Launch System (SLS) Mission Planner's Guide

Science.gov (United States)

Smith, David Alan

2017-01-01

The purpose of this Space Launch System (SLS) Mission Planner's Guide (MPG) is to provide future payload developers/users with sufficient insight to support preliminary SLS mission planning. Consequently, this SLS MPG is not intended to be a payload requirements document; rather, it organizes and details SLS interfaces/accommodations in a manner similar to that of current Expendable Launch Vehicle (ELV) user guides to support early feasibility assessment. Like ELV Programs, once approved to fly on SLS, specific payload requirements will be defined in unique documentation.

Application for TJ-II Signals Visualization: User's Guide; Aplicacion para la Visualizacion de Senales de TJ-II: Guia del Usuario

Energy Technology Data Exchange (ETDEWEB)

Sanchez, E.; Portas, A. B.; Vega, J. [Ciemat, Madrid (Spain)

2000-07-01

In this documents are described the functionalities of the application developed by the Data Acquisition Group for TJ-II signal visualization. There are two versions of the application, the On-line version, used for signal visualization during TJ-II operation, and the Off-line version, used for signal visualization without TJ-II operation. Both versions of the application consist in a graphical user interface developed for X/Motif, in which most of the actions can be done using the mouse buttons. The functionalities of both versions of the application are described in this user's guide, beginning at the application start-up and explaining in detail all the options that it provides and the actions that can be done with each graphic control. (Author) 8 refs.

Communication Systems Simulation Laboratory (CSSL): Simulation Planning Guide

Science.gov (United States)

Schlesinger, Adam

2012-01-01

The simulation process, milestones and inputs are unknowns to first-time users of the CSSL. The Simulation Planning Guide aids in establishing expectations for both NASA and non-NASA facility customers. The potential audience for this guide includes both internal and commercial spaceflight hardware/software developers. It is intended to assist their engineering personnel in simulation planning and execution. Material covered includes a roadmap of the simulation process, roles and responsibilities of facility and user, major milestones, facility capabilities, and inputs required by the facility. Samples of deliverables, facility interfaces, and inputs necessary to define scope, cost, and schedule are included as an appendix to the guide.

Cloud amount/frequency, NITRATE and other data from unknown platforms in the Indian Ocean from 1992-05-23 to 1993-02-04 (NODC Accession 9400144)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Ten data files containing 2,738 data records were submitted by Martien Baars to NODC/Ocean Climate Laboratory from the Netherlands Indian Ocean Programme. These...

Oceanographic profile temperature, chlorophyll and other measurements collected using bottle from the SHIRASE (JSVY) in the Antarctic from 1984 to 1985 (NODC Accession 0001048)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Source: Temperature, chlorophyll and other profile data received at NODC on 04/01/03 by Todd O'Brien from "Fukuda, Y., M. Ohno, M. Fukuchi, 1986 "Surface Chlorophyll...

Library Subject Guides: A Case Study of Evidence-Informed Library Development

Science.gov (United States)

Wakeham, Maurice; Roberts, Angharad; Shelley, Jane; Wells, Paul

2012-01-01

This paper describes the process whereby a university library investigated the value of its subject guides to its users. A literature review and surveys of library staff, library users and other libraries were carried out. Existing library subject guides and those of other higher education libraries were evaluated. The project team reported…

WAM-E user's manual

International Nuclear Information System (INIS)

Rayes, L.G.; Riley, J.E.

1986-07-01

The WAM-E series of mainframe computer codes have been developed to efficiently analyze the large binary models (e.g., fault trees) used to represent the logic relationships within and between the systems of a nuclear power plant or other large, multisystem entity. These codes have found wide application in reliability and safety studies of nuclear power plant systems. There are now nine codes in the WAM-E series, with six (WAMBAM/WAMTAP, WAMCUT, WAMCUT-II, WAMFM, WAMMRG, and SPASM) classified as Type A Production codes and the other three (WAMFTP, WAMTOP, and WAMCONV) classified as Research codes. This document serves as a combined User's Guide, Programmer's Manual, and Theory Reference for the codes, with emphasis on the Production codes. To that end, the manual is divided into four parts: Part I, Introduction; Part II, Theory and Numerics; Part III, WAM-E User's Guide; and Part IV, WAMMRG Programmer's Manual

Smart travel guide: from internet image database to intelligent system

Science.gov (United States)

Chareyron, Ga"l.; Da Rugna, Jérome; Cousin, Saskia

2011-02-01

To help the tourist to discover a city, a region or a park, many options are provided by public tourism travel centers, by free online guides or by dedicated book guides. Nonetheless, these guides provide only mainstream information which are not conform to a particular tourist behavior. On the other hand, we may find several online image databases allowing users to upload their images and to localize each image on a map. These websites are representative of tourism practices and constitute a proxy to analyze tourism flows. Then, this work intends to answer this question: knowing what I have visited and what other people have visited, where should I go now? This process needs to profile users, sites and photos. our paper presents the acquired data and relationship between photographers, sites and photos and introduces the model designed to correctly estimate the site interest of each tourism point. The third part shows an application of our schema: a smart travel guide on geolocated mobile devices. This android application is a travel guide truly matching the user wishes.

Cloud amount/frequency, SALINITY and other data from SATSUNAN, SEIFU MARU and other platforms from 1964-12-20 to 1978-12-19 (NODC Accession 7900327)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Entry contains old Japanese data submitted to NODC. Water depth and other physical profile data were collected using over a dozen different Japanese ships and other...

User's guide for LTGSTD24 program, Version 2. 4

Energy Technology Data Exchange (ETDEWEB)

Hanlon, R.L.; Connell, L.M.

1993-05-01

On January 30, 1989, the US Department of Energy (DOE) promulgated an interim rule entitled [open quotes]Energy Conservation Voluntary Performance Standards for New Commercial and Multi-Family High Rise Residential Buildings; Mandatory for New Federal Buildings[close quotes] (10 CFR Part 435, Subpart A). These standards require federal agencies to design all future federal commercial and multifamily high-rise residential buildings in accordance with the standards, or demonstrate that their current requirements already meet or exceed the energy-efficiency requirements of the standards. Although these newly enacted standards do not regulate the design of non-federal buildings, the DOE recommends that all design professionals use the standards as guidelines for designing energy-conserving buildings. To encourage private sector use, the DOE published the standards in the January 30, 1989, Federal Register in the format typical of commercial standards. The Pacific Northwest Laboratory developed several computer programs for the DOE to make it easier for designers to comply with the standards. One of the programs, LTGSTD24 (Version 2.4), is detailed in this user's guide and is provided on the accompanying diskettes. The program will facilitate the designer's use of the standards dealing specifically with building lighting design. Using this program will greatly simplify the designer's task of performing the calculations needed to determine if a design complies with the standards.

Hanford Ground-Water Data Base management guide

International Nuclear Information System (INIS)

Rieger, J.T.; Mitchell, P.J.; Muffett, D.M.; Fruland, R.M.; Moore, S.B.; Marshall, S.M.

1990-02-01

This guide describes the Hanford Ground-Water Data Base (HGWDB), a computerized data base used to store hydraulic head, sample analytical, temperature, geologic, and well-structure information for ground-water monitoring wells on the Hanford Site. These data are stored for the purpose of data retrieval for report generation and also for historical purposes. This guide is intended as an aid to the data base manager and the various staff authorized to enter and verify data, maintain the data base, and maintain the supporting software. This guide focuses on the structure of the HGWDB, providing a fairly detailed description of the programs, files, and parameters. Data-retrieval instructions for the general user of the HGWDB will be found in the HGWDB User's Manual. 6 figs

L2TTMON Monitoring Program for L2 Topological Trigger in H1 Experiment - User's Guide

International Nuclear Information System (INIS)

Banas, E.; Ducorps, A.

1999-01-01

Monitoring software for the L2 Topological Trigger in H1 experiment consists of two parts working on two different computers. The hardware read-out and data processing is done on a fast FIC 8234 computer working with the OS9 real time operating system. The Macintosh Quadra is used as a Graphic User Interface for accessing the OS9 trigger monitoring software. The communication between both computers is based on the parallel connection between the Macintosh and the VME crate, where the FIC computer is placed. The special designed protocol (client-server) is used to communicate between both nodes. The general scheme of monitoring for the L2 Topological Trigger and detailed description of using of the monitoring software in both nodes are given in this guide. (author)

AIR PRESSURE and Other Data from TIDE STATIONS From North American Coastline-North and Others from 1972-01-01 to 1974-06-30 (NODC Accession 7601613)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This entry contains tidal information for Chesapeake Bay. Data was submitted by Saul Berkman, NOS Tides Branch, Oceanographic Division. These data are in NODC...

Nonspeech audio in user interfaces for TV

NARCIS (Netherlands)

Sluis, van de Richard; Eggen, J.H.; Rypkema, J.A.

1997-01-01

This study explores the end-user benefits of using nonspeech audio in television user interfaces. A prototype of an Electronic Programme Guide (EPG) served as a carrier for the research. One of the features of this EPG is the possibility to search for TV programmes in a category-based way. The EPG

Support Services for Remote Users of Online Public Access Catalogs.

Science.gov (United States)

Kalin, Sally W.

1991-01-01

Discusses the needs of remote users of online public access catalogs (OPACs). User expectations are discussed; problems encountered by remote-access users are examined, including technical problems and searching problems; support services are described, including instruction, print guides, and online help; and differences from the needs of…

A Tourism e-Guide System Using Mobile Integration

OpenAIRE

Emad M. Abuelrub; Hanan M. Solaiman

2010-01-01

This paper presents a tourism e-guide system via mobile integration using offloading while enjoying mobility. A user can search for new mobile services available on the website to use either remotely on the server where the services resides, or locally after downloading them to his/her mobile device and work offline without a mobile connection. Jordan Tourism e-Guide System (JTeGS) aims to help the user/tourist accessing the tourism information directly from his/her smart device, anytime and ...

Visual explorer facilitator's guide

CERN Document Server

Palus, Charles J

2010-01-01

Grounded in research and practice, the Visual Explorer™ Facilitator's Guide provides a method for supporting collaborative, creative conversations about complex issues through the power of images. The guide is available as a component in the Visual Explorer Facilitator's Letter-sized Set, Visual Explorer Facilitator's Post card-sized Set, Visual Explorer Playing Card-sized Set, and is also available as a stand-alone title for purchase to assist multiple tool users in an organization.

Cloud amount/frequency, NITRATE and other data from KAKADIAMAA in the Gulf of Guinea from 1988-01-05 to 1988-12-20 (NODC Accession 9000174)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — One year data in 1988 was collected from Gulf of Guinea using ship named Kakadiamaa by Fisheries Institute, Tema, Ghana. NODC coding forms were used to report data...

Guide for disposition of radioactive-material sources

International Nuclear Information System (INIS)

Taylor, J.M.; Selby, J.M.

1983-04-01

This guide has been prepared to assist DOE Energy Technology Centers in disposing of radioactive-material sources. The guide describes the steps and requirements necessary to dispose of unwanted sources. The steps include obtaining approvals, source characterization, source disposition, packaging requirements, and shipment preparation. A flow chart is provided in the guide to assist the user in the necessary sequential steps of source disposition

Users Guide to VSMOKE-GIS for Workstations

Science.gov (United States)

Mary F. Harms; Leonidas G. Lavdas

1997-01-01

VSMOKE-GIS was developed to help prescribed burners in the national forests of the Southeastern United States visualize smoke dispersion and to plan prescribed burns. Developed for use on workstations, this decision-support system consists of a graphical user interface, written in Arc/Info Arc Macro Language, and is linked to a FORTRAN computer program. VSMOKE-GIS...

User's guide for PRISM (Plant Risk Status Information Management System) Arkansas Nuclear One-Unit 1: Volume 1, Program for inspectors

Energy Technology Data Exchange (ETDEWEB)

Campbell, D.J.; Guthrie, V.H.; Kirchner, J.R.; Kirkman, J.Q.; Paula, H.M.; Ellison, B.C.; Dycus, F.M.; Farquharson, J.A.; Flanagan, G.F.

1988-03-01

This user's guide is a two-volume document designed to teach NRC inspectors and NRC regulators how to access probabilistic risk assessment information from the two Plant Risk Status Information Management System (PRISIM) programs developed for Arkansas Nuclear One -- Unit One (ANO-1). This document, Volume 1, describes how the PRA information available in Version 1.0 of PRISIM is useful for planning inspections. Using PRISIM, inspectors can quickly access PRA information and use that information to update risk analysis results, reflecting a plant's status at any particular time. Both volumes are stand-alone documents, and each volume presents several sample computer sessions designed to lead the user through a variety of PRISIM applications used to obtain PRA-related information for monitoring and controlling plant risk.

Elevation Difference and Bouguer Anomaly Analysis Tool (EDBAAT) User's Guide

Science.gov (United States)

Smittle, Aaron M.; Shoberg, Thomas G.

2017-06-16

This report describes a software tool that imports gravity anomaly point data from the Gravity Database of the United States (GDUS) of the National Geospatial-Intelligence Agency and University of Texas at El Paso along with elevation data from The National Map (TNM) of the U.S. Geological Survey that lie within a user-specified geographic area of interest. Further, the tool integrates these two sets of data spatially and analyzes the consistency of the elevation of each gravity station from the GDUS with TNM elevation data; it also evaluates the consistency of gravity anomaly data within the GDUS data repository. The tool bins the GDUS data based on user-defined criteria of elevation misfit between the GDUS and TNM elevation data. It also provides users with a list of points from the GDUS data, which have Bouguer anomaly values that are considered outliers (two standard deviations or greater) with respect to other nearby GDUS anomaly data. “Nearby” can be defined by the user at time of execution. These outputs should allow users to quickly and efficiently choose which points from the GDUS would be most useful in reconnaissance studies or in augmenting and extending the range of individual gravity studies.

Oceanographic profile temperature and salinity measurements collected using bottles from the KORABLESTROITEL and TUNETS in the Arctic and Coastal N Atlantic in 1948 (NODC Accession 0001089)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Temperature, Salinity and meteorology data digitized at NODC on 05/02/03, received by Igor Smolyar, from the personal library papers of Dr. Aleksey Zuyev, Murmansk...

CURRENT DIRECTION, cloud amount/frequency and other data from unknown platforms in the NW Pacific from 1981-08-07 to 1983-02-23 (NODC Accession 8400332)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Format and other information for these data may only be available in analog form at this time. Please contact Services.NODC@noaa.gov for additional information.

Qualifications of persons working in radiation user's organization and radiation protection training required for competence

International Nuclear Information System (INIS)

2004-04-01

The Guide sets out the requirements governing the qualifications of persons working in userAes organizations and the radiation protection training required for such competence. It also sets out the requirements for training organizations arranging radiation safety officer training and exams. The Guide applies only to uses of radiation requiring a afety licence. The requirements for userAes organizations are set out in Guide ST 1.4

Modular Engine Noise Component Prediction System (MCP) Program Users' Guide

Science.gov (United States)

Golub, Robert A. (Technical Monitor); Herkes, William H.; Reed, David H.

2004-01-01

This is a user's manual for Modular Engine Noise Component Prediction System (MCP). This computer code allows the user to predict turbofan engine noise estimates. The program is based on an empirical procedure that has evolved over many years at The Boeing Company. The data used to develop the procedure include both full-scale engine data and small-scale model data, and include testing done by Boeing, by the engine manufacturers, and by NASA. In order to generate a noise estimate, the user specifies the appropriate engine properties (including both geometry and performance parameters), the microphone locations, the atmospheric conditions, and certain data processing options. The version of the program described here allows the user to predict three components: inlet-radiated fan noise, aft-radiated fan noise, and jet noise. MCP predicts one-third octave band noise levels over the frequency range of 50 to 10,000 Hertz. It also calculates overall sound pressure levels and certain subjective noise metrics (e.g., perceived noise levels).

User`s manual of a support system for human reliability analysis

Energy Technology Data Exchange (ETDEWEB)

Yokobayashi, Masao [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Tamura, Kazuo

1995-10-01

Many kinds of human reliability analysis (HRA) methods have been developed. However, users are required to be skillful so as to use them, and also required complicated works such as drawing event tree (ET) and calculation of uncertainty bounds. Moreover, each method is not so complete that only one method of them is not enough to evaluate human reliability. Therefore, a personal computer (PC) based support system for HRA has been developed to execute HRA practically and efficiently. The system consists of two methods, namely, simple method and detailed one. The former uses ASEP that is a simplified THERP-technique, and combined method of OAT and HRA-ET/DeBDA is used for the latter. Users can select a suitable method for their purpose. Human error probability (HEP) data were collected and a database of them was built to use for the support system. This paper describes outline of the HRA methods, support functions and user`s guide of the system. (author).

Interactive data manipulation program. FAWTEK user guide

International Nuclear Information System (INIS)

Boyer, W.B.; Sauer, S.

1980-02-01

This report describes the interactive data acquisition and manipulation program FAWTEK.'The program allows users of the electron beam data acquisition facility to control the R7912 digitizers and to perform a variety of mathematical operations on data arrays. Commands are entered in a high level language via a Tektronix 4010 terminal console. Each command directive and associated parameters is described in detail

COMPOZ data guide

International Nuclear Information System (INIS)

Knight, J.R.

1984-01-01

The COMPOZ Data Guide used to create the Standard Composition Library is described. Of particular importance is documentation of the COMPOZ input data file structure. Knowledge of the file structure allows users to edit the data file and subsequently create their own site-specific composition library

Development and user guide for GSI

International Nuclear Information System (INIS)

Lee, Dong Young; Kim, Jeong Taek; Hwang, In Ku; Ham, Chang Sik; Kwon, Ki Chun.

1997-05-01

ADIOS(Alarm Diagnosis and Integrated Operator Support) is designed to improve the operation performance of the man-machine interface system by giving dynamic alarm priority according to plant situation, and implemented with G2 real-time expert shell. It processes alarm priority in G2 using the plant data which is received from simulator, and sends the processed alarm signals to the alarm tile through TCP/IP communication link. This report includes some experiences about the GSI(G2 Standard Interface) configuration and user programming, and describes about how to build on-line ADIOS system. (author)

Users' guide to the positron camera DDP516 computer system

International Nuclear Information System (INIS)

Bracher, B.H.

1979-08-01

This publication is a guide to the operation, use and software for a DDP516 computer system provided by the Data Handling Group primarily for the development of a Positron Camera. The various sections of the publication fall roughly into three parts. (1) Sections forming the Operators Guide cover the basic operation of the machine, system utilities and back-up procedures. Copies of these sections are kept in a 'Nyrex' folder with the computer. (2) Sections referring to the software written particularly for Positron Camera Data Collection describe the system in outline and lead to details of file formats and program source files. (3) The remainder of the guide, describes General-Purpose Software. Much of this has been written over some years by various members of the Data Handling Group, and is available for use in other applications besides the positron camera. (UK)

Oracle Hyperion Interactive Reporting 11 Expert Guide

CERN Document Server

Cody, Edward J

2011-01-01

This book is written in a simple, easy to understand format with screenshots, code samples, and step-by-step explanations that will guide you through the advanced techniques used by the experts. If you are an Oracle Hyperion Interactive reporting user or developer looking to become an expert in the product, then this book is for you. You will require a basic knowledge of Interactive Reporting, as this book starts with a brief overview and then dives into advanced techniques, functions, and best practices. Beginner users should consult The Business Analyst's Guide to Oracle Hyperion Interactive

MASCOT and MOP programs for probabilistic safety assessment. Pt. E. MOP (Version 3A) user guide

International Nuclear Information System (INIS)

Agg, P.J.; Hopper, M.J.; Sinclair, J.E.; Sumner, P.J.

1994-04-01

MOP is a post-processor for the probabilistic safety assessment program MASCOT, which models the consequences of the disposal of radioactive waste. This document provides a general description of the capabilities of the MOP program, together with a comprehensive guide to the MOP user command language. MOP is able to calculate and present various statistical measures of the modelled radiological consequences, in both printed and graphical form. The results of intermediate analyses can be saved from one MOP job to the next, and this allows MOP to be used as many times as desired to process the results of the same MASCOT job. MOP can work with the quantities passed to it from the MASCOT job or with new quantities, defined and calculated according to individual requirements. This is usually done by transforming the MASCOT quantities using algebraic expressions. (Author)

User's guide to the LIRAQ model: an air pollution model for the San Francisco Bay Area

International Nuclear Information System (INIS)

MacCracken, M.C.

1975-01-01

The Livermore Regional Air Quality (LIRAQ) model comprises a set of computer programs that have been integrated into an easily used tool for the air quality planner. To assemble and modify the necessary data files and to direct model execution, a problem formulation program has been developed that makes possible the setup of a wide variety of studies involving perturbation of the emission inventory, changes to the initial and boundary conditions, and different choices of grid size and problem domain. In addition to describing the types of air quality problems for which the LIRAQ model may be used, this User's Guide provides detailed information on how to set up and conduct model simulations. Also included are descriptions of the formats of input data files so that the LIRAQ model may be applied to regions other than the San Francisco Bay Area

SOUND VELOCITY and Other Data from FIXED PLATFORM and Other Platforms From NE Atlantic (limit-40 W) and Others from 19860512 to 19891112 (NODC Accession 9000121)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The sound velocity and other data in this accession has been processed by NODC from a tape submitted by the originator containing Inverted Echo Sounder data from the...

4 km NODC/RSMAS AVHRR Pathfinder v5.0 and Interim v5.0 Sea Surface Temperature (SST) Data and v5.1 SST Data for 1981-2009

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The 4 km Pathfinder effort at the National Oceanic and Atmospheric Administration (NOAA) National Oceanographic Data Center (NODC) and the University of Miami's...

MELCOR computer code manuals: Primer and user's guides, Version 1.8.3 September 1994. Volume 1

International Nuclear Information System (INIS)

Summers, R.M.; Cole, R.K. Jr.; Smith, R.C.; Stuart, D.S.; Thompson, S.L.; Hodge, S.A.; Hyman, C.R.; Sanders, R.L.

1995-03-01

MELCOR is a fully integrated, engineering-level computer code that models the progression of severe accidents in light water reactor nuclear power plants. MELCOR is being developed at Sandia National Laboratories for the US Nuclear Regulatory Commission as a second-generation plant risk assessment tool and the successor to the Source Term Code Package. A broad spectrum of severe accident phenomena in both boiling and pressurized water reactors is treated in MELCOR in a unified framework. These include: thermal-hydraulic response in the reactor coolant system, reactor cavity, containment, and confinement buildings; core heatup, degradation, and relocation; core-concrete attack; hydrogen production, transport, and combustion; fission product release and transport; and the impact of engineered safety features on thermal-hydraulic and radionuclide behavior. Current uses of MELCOR include estimation of severe accident source terms and their sensitivities and uncertainties in a variety of applications. This publication of the MELCOR computer code manuals corresponds to MELCOR 1.8.3, released to users in August, 1994. Volume 1 contains a primer that describes MELCOR's phenomenological scope, organization (by package), and documentation. The remainder of Volume 1 contains the MELCOR Users' Guides, which provide the input instructions and guidelines for each package. Volume 2 contains the MELCOR Reference Manuals, which describe the phenomenological models that have been implemented in each package

Guide to Using Sierra

Energy Technology Data Exchange (ETDEWEB)

Shaw, Ryan Phillip [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Agelastos, Anthony Michael [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Miller, Joel D. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-03-01

Sierra is an engineering mechanics simulation code suite supporting the Nation's Nuclear Weapons mission as well as other customers. It has explicit ties to Sandia National Labs' workfow, including geometry and meshing, design and optimization, and visualization. Dis- tinguishing strengths include "application aware" development, scalability, SQA and V&V, multiple scales, and multi-physics coupling. This document is intended to help new and existing users of Sierra as a user manual and troubleshooting guide.

Guide to Using Sierra

Energy Technology Data Exchange (ETDEWEB)

Shaw, Ryan Phillip; Agelastos, Anthony Michael; Miller, Joel D.

2017-04-01

Sierra is an engineering mechanics simulation code suite supporting the Nation's Nuclear Weapons mission as well as other customers. It has explicit ties to Sandia National Labs' workfow, including geometry and meshing, design and optimization, and visualization. Dis- tinguishing strengths include "application aware" development, scalability, SQA and V&V, multiple scales, and multi-physics coupling. This document is intended to help new and existing users of Sierra as a user manual and troubleshooting guide.

Interactive data manipulation program FAWTEK user guide

International Nuclear Information System (INIS)

Boyer, W.B.

1977-02-01

The interactive data acquisitio and manipulation program FAWTEK is described. The program allows users of the electron beam data acquisition facility to control the R7912 digitizers and to perform a variety of mathematical operations on data arrays. Commands are entered in a high-level language via a Tektronix 4010 terminal console. Each command directive, aling with its associated parameters, is described in detail

Performance-Oriented packaging: A guide to identifying, procuring, and using

International Nuclear Information System (INIS)

O'Brien, J.H.

1992-09-01

This document guides users through the process of correctly identifying, obtaining, and using performance-oriented packaging. Almost all hazardous material shipments can be made in commercially available performance-oriented packaging. To cover the remaining shipments requiring specially designed packaging, a design guide is being developed. The design guide is scheduled to be issued 1 year after this procurement guide

Reasons for not using ecstasy: a qualitative study of non-users, ex-light users and ex-moderate users

Science.gov (United States)

2012-01-01

Background Although ecstasy is often consumed in the electronic music scene, not everyone with the opportunity to use it chooses to do so. The objective of this study was to understand the reasons for non-use or the cessation of use, which could provide information for public health interventions. Methods A qualitative reference method was used. Our “snowball” sample group consisted of 53 people who were split into three subgroups: non-users (NU, n = 23), ex-light users (EX-L, n = 12) and ex-moderate users (EX-M, n = 18). Individual, semi-structured interviews were conducted, transcribed and subjected to content analysis with the aid of NVivo8. Results Adverse health effects and personal values were given as reasons for non-use in the three groups. Non-users (NU) and ex-light users (EX-L) provided reasons that included fear of possible effects as well as moral, family and religious objections. Ex-moderate users (EX-M) cited reasons related to health complications and concomitant withdrawal from the electronic music scene. However, most of the ex-moderate users did not rule out the possibility of future use. Conclusions Potential effects and undesirable consequences appear to guide the decisions within the different groups. Prevention might target these motivations. Individuals who have used ecstasy indicate that social and environmental factors are the most important factors. PMID:22583984

GRSAC Users Manual

International Nuclear Information System (INIS)

Ball, S.J.; Nypaver, D.J.

1999-01-01

An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model

GRSAC Users Manual

Energy Technology Data Exchange (ETDEWEB)

Ball, S.J.; Nypaver, D.J.

1999-02-01

An interactive workstation-based simulation code (GRSAC) for studying postulated severe accidents in gas-cooled reactors has been developed to accommodate user-generated input with ''smart front-end'' checking. Code features includes on- and off-line plotting, on-line help and documentation, and an automated sensitivity study option. The code and its predecessors have been validated using comparisons with a variety of experimental data and similar codes. GRSAC model features include a three-dimensional representation of the core thermal hydraulics, and optional ATWS (anticipated transients without scram) capabilities. The user manual includes a detailed description of the code features, and includes four case studies which guide the user through four different examples of the major uses of GRSAC: an accident case; an initial conditions setup and run; a sensitivity study; and the setup of a new reactor model.

Maintenance Personnel Performance Simulation (MAPPS) model. Users' Manual

International Nuclear Information System (INIS)

Kopstein, F.F.; Wolf, J.J.

1985-09-01

This report (MAPPS User's Manual) is the last report to be published from this program and provides detailed guidelines for utilization of the MAPPS model. Although the model has been developed to be highly user-friendly and provides interactive means for controlling and running of the model, the user's manual is provided as a guide for the user in the event clarification or direction is required. The user will find that in general the model requires primarily user input that is self explanatory. Once initial familiarization with the model has been achieved by the user, the amount of interaction between the user's manual and the computer model will be minimal. It is suggested however that even the experienced user keep the user's manual handy for quick reference. 5 refs., 10 figs., 7 tabs

User guide to power management for PCs and monitors

Energy Technology Data Exchange (ETDEWEB)

Nordman, B.; Piette, M.A.; Kinney, K.; Webber, C. [Lawrence Berkeley National Lab., CA (United States). Environmental Energy Technologies Div.

1997-01-01

Power management of personal computers (PCs) and monitors has the potential to save significant amounts of electricity as well as deliver other economic and environmental benefits. The Environmental Protection Agency`s ENERGY STAR{reg_sign} program has transformed the PC market so that equipment capable of power management is now widely available. However, previous studies have found that many Energy Star compliant computer systems are not accomplishing energy savings. The principal reasons for this are systems not being enabled for power management or a circumstance that prevents power management from operating. This guide is intended to provide information to computer support workers to increase the portion of systems that successfully power manage. The guide introduces power management concepts and the variety of benefits that power management can bring. It then explains how the parts of a computer system work together to enter and leave power management states. Several common computer system types are addressed, as well as the complications that networks bring to power management. Detailed instructions for checking and configuring several system types are provided, along with trouble shooting advice. The guide concludes with a discussion of how to purchase Energy Star compliant systems and future directions for power management of PCs and related equipment.

Underway meteorological, navigational, physical and time series data collected aboard NOAA Ship Fairweather in the Gulf of Alaska from 2014-04-28 to 2014-07-28 (NODC Accession 0126498)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0126498 contains raw underway meteorological, navigational, physical and time series data logged by the Scientific Computer System (SCS) aboard NOAA...

Dose calibrator user and quality control guide

International Nuclear Information System (INIS)

Blanchis, Philippe; Amiot, Marie-Noelle; Moune, Muriel; Bellanger, Anne-Christine; Chauvenet, Bruno; Verdeau, Eric; Gardin, Isabelle; Martineau, Antoine; Ricard, Marcel; Caselles, Olivier; Guilhem, Marie-Therese; Hapdey, Sebastien; Lisbona, Albert; Bonnot-Lours, Sophie; Dumont, Agnes; Lemercier, Valerie; Rizzo-Padoin, Nathalie

2006-06-01

This document is a practical guide for the use and control of dose calibrators which are instruments used for radioactivity measurements. After a recall of the calibrator operation principle, the authors describe all the operations performed on this apparatus all along its lifetime: controls to be performed for device acceptance, aspects to be addressed during installation, controls to be performed before any use, daily controls, more detailed controls, and operations to be performed for maintenance, in case of dysfunctions or for re-calibration

Pattern-Guided k-Anonymity

Directory of Open Access Journals (Sweden)

Rolf Niedermeier

2013-10-01

Full Text Available We suggest a user-oriented approach to combinatorial data anonymization. A data matrix is called k-anonymous if every row appears at least k times—the goal of the NP-hard k-ANONYMITY problem then is to make a given matrix k-anonymous by suppressing (blanking out as few entries as possible. Building on previous work and coping with corresponding deficiencies, we describe an enhanced k-anonymization problem called PATTERN-GUIDED k-ANONYMITY, where the users specify in which combinations suppressions may occur. In this way, the user of the anonymized data can express the differing importance of various data features. We show that PATTERN-GUIDED k-ANONYMITY is NP-hard. We complement this by a fixed-parameter tractability result based on a “data-driven parameterization” and, based on this, develop an exact integer linear program (ILP-based solution method, as well as a simple, but very effective, greedy heuristic. Experiments on several real-world datasets show that our heuristic easily matches up to the established “Mondrian” algorithm for k-ANONYMITY in terms of the quality of the anonymization and outperforms it in terms of running time.

Common Graphics Library (CGL). Volume 2: Low-level user's guide

Science.gov (United States)

Taylor, Nancy L.; Hammond, Dana P.; Theophilos, Pauline M.

1989-01-01

The intent is to instruct the users of the Low-Level routines of the Common Graphics Library (CGL). The Low-Level routines form an application-independent graphics package enabling the user community to construct and design scientific charts conforming to the publication and/or viewgraph process. The Low-Level routines allow the user to design unique or unusual report-quality charts from a set of graphics utilities. The features of these routines can be used stand-alone or in conjunction with other packages to enhance or augment their capabilities. This library is written in ANSI FORTRAN 77, and currently uses a CORE-based underlying graphics package, and is therefore machine-independent, providing support for centralized and/or distributed computer systems.

Underway navigational, physical and time series data collected aboard NOAA Ship Thomas Jefferson in the North Atlantic Ocean from 2013-06-17 to 2013-10-02 (NODC Accession 0123055)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0123055 contains raw underway navigational, physical and time series data logged by the Scientific Computer System (SCS) aboard NOAA Ship Thomas...

User's Guide for TOUGH2-MP - A Massively Parallel Version of the TOUGH2 Code

International Nuclear Information System (INIS)

Earth Sciences Division; Zhang, Keni; Zhang, Keni; Wu, Yu-Shu; Pruess, Karsten

2008-01-01

TOUGH2-MP is a massively parallel (MP) version of the TOUGH2 code, designed for computationally efficient parallel simulation of isothermal and nonisothermal flows of multicomponent, multiphase fluids in one, two, and three-dimensional porous and fractured media. In recent years, computational requirements have become increasingly intensive in large or highly nonlinear problems for applications in areas such as radioactive waste disposal, CO2 geological sequestration, environmental assessment and remediation, reservoir engineering, and groundwater hydrology. The primary objective of developing the parallel-simulation capability is to significantly improve the computational performance of the TOUGH2 family of codes. The particular goal for the parallel simulator is to achieve orders-of-magnitude improvement in computational time for models with ever-increasing complexity. TOUGH2-MP is designed to perform parallel simulation on multi-CPU computational platforms. An earlier version of TOUGH2-MP (V1.0) was based on the TOUGH2 Version 1.4 with EOS3, EOS9, and T2R3D modules, a software previously qualified for applications in the Yucca Mountain project, and was designed for execution on CRAY T3E and IBM SP supercomputers. The current version of TOUGH2-MP (V2.0) includes all fluid property modules of the standard version TOUGH2 V2.0. It provides computationally efficient capabilities using supercomputers, Linux clusters, or multi-core PCs, and also offers many user-friendly features. The parallel simulator inherits all process capabilities from V2.0 together with additional capabilities for handling fractured media from V1.4. This report provides a quick starting guide on how to set up and run the TOUGH2-MP program for users with a basic knowledge of running the (standard) version TOUGH2 code. The report also gives a brief technical description of the code, including a discussion of parallel methodology, code structure, as well as mathematical and numerical methods used

Underway meteorological, navigational, optical, physical and time series data collected aboard NOAA Ship Oscar Dyson in the Bering Sea from 2014-06-12 to 2014-08-14 (NODC Accession 0124303)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0124303 contains raw underway meteorological, navigational, optical, physical and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, optical, physical and time series data collected aboard NOAA Ship Pisces in the North Atlantic Ocean from 2013-07-01 to 2013-07-12 (NODC Accession 0117838)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0117838 contains raw underway meteorological, navigational, optical, physical and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, optical, physical and time series data collected aboard NOAA Ship Oscar Dyson in the Bering Sea from 2014-05-06 to 2014-05-17 (NODC Accession 0125087)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0125087 contains raw underway meteorological, navigational, optical, physical and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, optical, physical and time series data collected aboard NOAA Ship Oscar Dyson in the Bering Sea from 2014-05-20 to 2014-06-08 (NODC Accession 0125267)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0125267 contains raw underway meteorological, navigational, optical, physical and time series data logged by the Scientific Computer System (SCS)...

Launching platforms for user-generated content

OpenAIRE

Batista, Guilherme Luís Caroço

2015-01-01

Field lab: Entrepreneurial and innovative ventures This paper intends to discuss and absorb the Best Practices employed by successful User- Generated Content (UGC)1 platforms and constitute a guide on how to launch a platform without having a cyclical lack of content and users. Research shows that companies have resorted to integration with mature UGC platforms, and providing content by themselves, in an initial state. I conclude that integration possibilities should be explore...

Mobile devices a practical guide for librarians

CERN Document Server

Rawlins, Ben

2014-01-01

As more users expect to use their mobile devices, librarians will want and need to develop the necessary skills to reach this growing user base. Mobile Devices: A Practical Guide for Librarians will aid libraries and librarians as they go through the process of planning, developing, implementing, marketing, and evaluating mobile services.

Successful user experience strategy and roadmaps

CERN Document Server

Rosenzweig, Elizabeth

2015-01-01

Successful User Experience: Strategy and Roadmaps provides you with a hands-on guide for pulling all of the User Experience (UX) pieces together to create a strategy that includes tactics, tools, and methodologies. Leveraging material honed in user experience courses and over 25 years in the field, the author explains the value of strategic models to refine goals against available data and resources. You will learn how to think about UX from a high level, design the UX while setting goals for a product or project, and how to turn that into concrete actionable steps. After reading this book, y

IceT users' guide and reference.

Energy Technology Data Exchange (ETDEWEB)

Moreland, Kenneth D.

2011-01-01

The Image Composition Engine for Tiles (IceT) is a high-performance sort-last parallel rendering library. In addition to providing accelerated rendering for a standard display, IceT provides the unique ability to generate images for tiled displays. The overall resolution of the display may be several times larger than any viewport that may be rendered by a single machine. This document is an overview of the user interface to IceT.

IceT users' guide and reference.

Energy Technology Data Exchange (ETDEWEB)

Moreland, Kenneth D.

2009-06-01

The Image Composition Engine for Tiles (IceT) is a high-performance sort-last parallel rendering library. In addition to providing accelerated rendering for a standard display, IceT provides the unique ability to generate images for tiled displays. The overall resolution of the display may be several times larger than any viewport that may be rendered by a single machine. This document is an overview of the user interface to IceT.

A user's guide to functional diversity indices

OpenAIRE

Schleuter, D.; Daufresne, M.; Massol, F.; Argillier, C.

2010-01-01

Functional diversity is the diversity of species traits in ecosystems. This concept is increasingly used in ecological research, yet its formal definition and measurements are currently under discussion. As the overall behaviour and consistency of functional diversity indices have not been described so far, the novice user risks choosing an inaccurate index or a set of redundant indices to represent functional diversity. In our study we closely examine functional diversity indices to clari...

HiRel: Hybrid Automated Reliability Predictor (HARP) integrated reliability tool system, (version 7.0). Volume 3: HARP Graphics Oriented (GO) input user's guide

Science.gov (United States)

Bavuso, Salvatore J.; Rothmann, Elizabeth; Mittal, Nitin; Koppen, Sandra Howell

1994-01-01

The Hybrid Automated Reliability Predictor (HARP) integrated Reliability (HiRel) tool system for reliability/availability prediction offers a toolbox of integrated reliability/availability programs that can be used to customize the user's application in a workstation or nonworkstation environment. HiRel consists of interactive graphical input/output programs and four reliability/availability modeling engines that provide analytical and simulative solutions to a wide host of highly reliable fault-tolerant system architectures and is also applicable to electronic systems in general. The tool system was designed at the outset to be compatible with most computing platforms and operating systems, and some programs have been beta tested within the aerospace community for over 8 years. This document is a user's guide for the HiRel graphical preprocessor Graphics Oriented (GO) program. GO is a graphical user interface for the HARP engine that enables the drawing of reliability/availability models on a monitor. A mouse is used to select fault tree gates or Markov graphical symbols from a menu for drawing.

Standard guide for digital detector array radiology

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This standard is a user guide, which is intended to serve as a tutorial for selection and use of various digital detector array systems nominally composed of the detector array and an imaging system to perform digital radiography. This guide also serves as an in-detail reference for the following standards: Practices E2597, , and E2737. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

EXFOR basics. A short guide to the nuclear reaction data exchange format

International Nuclear Information System (INIS)

McLane, Victoria

2000-01-01

EXFOR is the agreed exchange format for the transmission of experimental nuclear reaction data between national and international nuclear data centers for the benefit of nuclear data users in all countries. This report is intended as a guide to data users. For a complete guide to the EXFOR system see: EXFOR Systems Manual, IAEA-NDS-207 (BNL-NCS-63330-00/04-Rev.) (author)

Underway meteorological, navigational, physical and time series data collected aboard NOAA Ship Thomas Jefferson in the North Atlantic Ocean from 2013-09-24 to 2013-11-04 (NODC Accession 0123614)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0123614 contains raw underway meteorological, navigational, physical and time series data logged by the Scientific Computer System (SCS) aboard NOAA...

Underway meteorological, navigational, physical and time series data collected aboard NOAA Ship Okeanos Explorer in the North Atlantic Ocean from 2014-08-09 to 2014-10-07 (NODC Accession 0125346)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0125346 contains raw underway meteorological, navigational, physical and time series data logged by the Scientific Computer System (SCS) aboard NOAA...

Underway meteorological, navigational, physical and time series data collected aboard NOAA Ship Hi'ialakai in the North Pacific Ocean from 2013-07-09 to 2013-07-16 (NODC Accession 0113243)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0113243 contains raw underway meteorological, navigational, physical and time series data logged by the Scientific Computer System (SCS) aboard NOAA...

Underway meteorological, navigational, physical and time series data collected aboard NOAA Ship Nancy Foster in the North Atlantic Ocean from 2014-05-19 to 2014-05-20 (NODC Accession 0118685)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0118685 contains raw underway meteorological, navigational, physical and time series data logged by the Scientific Computer System (SCS) aboard NOAA...

Underway meteorological, navigational, physical and time series data collected aboard NOAA Ship Hi'ialakai in the North Pacific Ocean from 2013-06-26 to 2013-07-03 (NODC Accession 0099244)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0099244 contains raw underway meteorological, navigational, physical and time series data logged by the Scientific Computer System (SCS) aboard NOAA...

Underway meteorological, navigational, physical and time series data collected aboard NOAA Ship Okeanos Explorer in the North Atlantic Ocean from 2015-02-09 to 2015-02-13 (NODC Accession 0125757)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0125757 contains raw underway meteorological, navigational, physical and time series data logged by the Scientific Computer System (SCS) aboard NOAA...

Underway meteorological, navigational, optical and physical data collected aboard NOAA Ship Oscar Elton Sette in the North Pacific Ocean from 2013-09-11 to 2013-09-30 (NODC Accession 0117012)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0117012 contains raw underway meteorological, navigational, optical and physical data logged by the Scientific Computer System (SCS) aboard NOAA Ship...

Underway meteorological, navigational, physical and time series data collected aboard NOAA Ship Nancy Foster in the North Atlantic Ocean from 2014-04-20 to 2014-04-30 (NODC Accession 0118187)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0118187 contains raw underway meteorological, navigational, physical and time series data logged by the Scientific Computer System (SCS) aboard NOAA...

Underway meteorological, navigational, physical and time series data collected aboard NOAA Ship Hi'ialakai in the North Pacific Ocean from 2014-09-06 to 2014-09-30 (NODC Accession 0122499)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0122499 contains raw underway meteorological, navigational, physical and time series data logged by the Scientific Computer System (SCS) aboard NOAA...

Underway meteorological, navigational, physical and time series data collected aboard NOAA Ship Thomas Jefferson in the North Atlantic Ocean from 2013-03-11 to 2013-03-13 (NODC Accession 0123054)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0123054 contains raw underway meteorological, navigational, physical and time series data logged by the Scientific Computer System (SCS) aboard NOAA...

Underway meteorological, navigational, physical and time series data collected aboard NOAA Ship Nancy Foster in the North Atlantic Ocean from 2014-11-12 to 2014-11-21 (NODC Accession 0125582)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0125582 contains raw underway meteorological, navigational, physical and time series data logged by the Scientific Computer System (SCS) aboard NOAA...

Integrated Tiger Series of electron/photon Monte Carlo transport codes: a user's guide for use on IBM mainframes

International Nuclear Information System (INIS)

Kirk, B.L.

1985-12-01

The ITS (Integrated Tiger Series) Monte Carlo code package developed at Sandia National Laboratories and distributed as CCC-467/ITS by the Radiation Shielding Information Center (RSIC) at Oak Ridge National Laboratory (ORNL) consists of eight codes - the standard codes, TIGER, CYLTRAN, ACCEPT; the P-codes, TIGERP, CYLTRANP, ACCEPTP; and the M-codes ACCEPTM, CYLTRANM. The codes have been adapted to run on the IBM 3081, VAX 11/780, CDC-7600, and Cray 1 with the use of the update emulator UPEML. This manual should serve as a guide to a user running the codes on IBM computers having 370 architecture. The cases listed were tested on the IBM 3033, under the MVS operating system using the VS Fortran Level 1.3.1 compiler

PHYTOPLANKTON - WET WEIGHT and Other Data from UNKNOWN PLATFORMS and Other Platforms From TOGA Area - Pacific (30 N to 30 S) and Others from 19680101 to 19840613 (NODC Accession 9000066)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Chinese National Oceanographic Data Center provided NODC with 13 tapes of CTD, XBT, station data, chlorophyll, primary productivity and vessel report data...

Carbon dioxide, temperature, and salinity collected via surface underway survey in the East Coast of the United States (northwestern Atlantic Ocean) during the Ocean Margins Program cruises (NODC Accession 0083626)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0083626 includes underway chemical and physical data collected from COLUMBUS ISELIN, ENDEAVOR, GYRE, OCEANUS, and SEWARD JOHNSON in the North Atlantic...

Letting Students Take the Lead: A User-Centred Approach to Evaluating Subject Guides

Directory of Open Access Journals (Sweden)

Kimberley Hintz

2010-12-01

Full Text Available Objective – What do students need and want from library subject guides? Options such as Web 2.0 enhancement are now available to librarians creating subject-specific web pages. Librarians may be eager to implement these new tools, but are such add-ons a priority forstudents? This paper aims to start a dialogue on this issue by presenting the findings of the University of British Columbia (UBC Library’s Subject Guides Working Group (SGWG, which was tasked with assessing current library subject guides in order to make recommendations for the update and future development of UBC Library subject guides.Methods – The working group solicited feedback through a questionnaire that was distributed to undergraduate and graduate students from a variety of disciplines at UBC. The questionnaire included an evaluation of UBC subject guides, as well as guides from other academic libraries that used various platforms such as LibGuides and SubjectsPlus.Results – Respondents to the student questionnaire indicated that a simple and clean layout was of primary importance. Students also desired succinct annotations to resources and limited page scrolling. Meanwhile, few students identified Web 2.0 features such as rating systems and discussion forums as being important for their needs. The working group used the questionnaire data to create a “Top Ten” list of student recommendations.Conclusions – The “Top Ten” list of student recommendations was combined with stakeholder feedback from faculty, liaison librarians and Library Systems and Information Technology representatives to create the SGWG’s final recommendation for subject guide revision and enhancement. For the SGWG these findings called into question the necessity of Web 2.0 technologies within subject guide pages and highlighted the need for further research on the topic of subject guide usability and effectiveness.

Underway meteorological, navigational, optical, physical, profile and time series data collected aboard NOAA Ship Pisces in the Gulf of Mexico from 2014-05-27 to 2014-09-30 (NODC Accession 0119414)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0119414 contains raw underway meteorological, navigational, optical, physical, profile and time series data logged by the Scientific Computer System...

Underway meteorological, navigational, optical, physical and time series data collected aboard NOAA Ship Okeanos Explorer in the North Atlantic Ocean from 2014-02-08 to 2014-02-10 (NODC Accession 0123613)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0123613 contains raw underway meteorological, navigational, optical, physical and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, optical, physical and time series data collected aboard NOAA Ship Nancy Foster in the North Atlantic Ocean from 2013-07-12 to 2013-07-21 (NODC Accession 0113448)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0113448 contains raw underway meteorological, navigational, optical, physical and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, optical, physical and time series data collected aboard NOAA Ship Nancy Foster in the North Atlantic Ocean from 2013-08-31 to 2013-09-07 (NODC Accession 0113487)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0113487 contains raw underway meteorological, navigational, optical, physical and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, optical, physical, profile and time series data collected aboard NOAA Ship Pisces in the North Atlantic Ocean from 2014-07-06 to 2014-08-02 (NODC Accession 0121197)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0121197 contains raw underway meteorological, navigational, optical, physical, profile and time series data logged by the Scientific Computer System...

Underway meteorological and oceanographic chemical and physical data collected aboard the R/V Celtic Explorer in the north Atlantic Ocean from June 15, 2006 to July 5, 2006 (NODC Accession 0084476)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0084476 includes underway meteorological and oceanographic chemical and physical data collected aboard the Celtic Explorer in North Atlantic Ocean...

Underway meteorological, navigational, optical, physical and time series data collected aboard NOAA Ship Oscar Dyson in the Gulf of Alaska from 2013-03-14 to 2013-03-28 (NODC Accession 0124186)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0124186 contains raw underway meteorological, navigational, optical, physical and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, optical, physical, profile and time series data collected aboard NOAA Ship Pisces in the Gulf of Mexico from 2014-08-22 to 2014-09-12 (NODC Accession 0121982)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0121982 contains raw underway meteorological, navigational, optical, physical, profile and time series data logged by the Scientific Computer System...

Exploring users motivation in innovation communities

OpenAIRE

Ståhlbröst, Anna; Bergvall-Kåreborn, Birgitta

2011-01-01

A rapid growth of technologies supporting user interaction on the Internet, such as social networking sites and other virtual communities, can be seen today. These virtual communities have been shown to be of great value to companies that want to involve users in their innovation processes. However, in order to guide organisations on how to utilise their innovation intermediary communities, more knowledge is needed regarding who they are and their motivational drivers for participating in a c...

Temperature, salinity, and other profile data collected from CTD and bottle casts from the CLIVAR and Carbon Hydrographic Data Office (CCHDO) from 1972-07-24 to present (NODC Accession 0038589)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0038589 contains all the data the CLIVAR and Carbon Hydrographic Data Office (CCHDO) assembled and processed through 2017-07-05. This Accession...

Carbon dioxide, temperature, salinity and other variables collected via time series monitoring from MOORINGS in the North Pacific Ocean from 1998-06-22 to 2004-11-23 (NODC Accession 0100079)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0100079 includes chemical, time series and underway - surface data collected from MOORINGS in the North Pacific Ocean and South Pacific Ocean from...

Activity Management System user reference manual. Revision 1

International Nuclear Information System (INIS)

Gates, T.A.; Burdick, M.B.

1994-01-01

The Activity Management System (AMS) was developed in response to the need for a simple-to-use, low-cost, user interface system for collecting and logging Hanford Waste Vitrification Plant Project (HWVP) activities. This system needed to run on user workstations and provide common user access to a database stored on a local network file server. Most important, users wanted a system that provided a management tool that supported their individual process for completing activities. Existing system treated the performer as a tool of the system. All AMS data is maintained in encrypted format. Users can feel confident that any activities they have entered into the database are private and that, as the originator, they retain sole control over who can see them. Once entered into the AMS database, the activities cannot be accessed by anyone other than the originator, the designated agent, or by authorized viewers who have been explicitly granted the right to look at specific activities by the originator. This user guide is intended to assist new AMS users in learning how to use the application and, after the initial learning process, will serve as an ongoing reference for experienced users in performing infrequently used functions. Online help screens provide reference to some of the key information in this manual. Additional help screens, encompassing all the applicable material in this manual, will be incorporated into future AMS revisions. A third, and most important, source of help is the AMS administrator(s). This guide describes the initial production version of AMS, which has been designated Revision 1.0

HTGR Cost Model Users' Manual

International Nuclear Information System (INIS)

Gandrik, A.M.

2012-01-01

The High Temperature Gas-Cooler Reactor (HTGR) Cost Model was developed at the Idaho National Laboratory for the Next Generation Nuclear Plant Project. The HTGR Cost Model calculates an estimate of the capital costs, annual operating and maintenance costs, and decommissioning costs for a high-temperature gas-cooled reactor. The user can generate these costs for multiple reactor outlet temperatures; with and without power cycles, including either a Brayton or Rankine cycle; for the demonstration plant, first of a kind, or nth of a kind project phases; for a single or four-pack configuration; and for a reactor size of 350 or 600 MWt. This users manual contains the mathematical models and operating instructions for the HTGR Cost Model. Instructions, screenshots, and examples are provided to guide the user through the HTGR Cost Model. This model was design for users who are familiar with the HTGR design and Excel. Modification of the HTGR Cost Model should only be performed by users familiar with Excel and Visual Basic.

Temperature, salinity and other variables from the from the CLIVAR-Carbon Hydrographic Office (CCHDO) from 2003-10-23 to 2005-02-26 (NODC Accession 0002720)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from the CLIVAR-Carbon Hydrographic Office (CCHDO) were acquired by NODC. Cruises in this accession include: A16N_Leg1, A16N_Leg2, A16S, A20, A22, P02, and...

Library subject guides: A case study of evidence-informed library development

OpenAIRE

Wakeham, Maurice; Roberts, Angharad; Shelley, Jane; Wells, Paul

2012-01-01

This paper describes the process whereby a university library investigated the value of its subject guides to its users. A literature review and surveys of library staff, library users and other libraries were carried out. Existing library subject guides and those of other higher education libraries were evaluated. The project team reported regularly to the wider library team throughout the year long investigation and made recommendations. The project served to develop the professional skills...

Macintosh Troubleshooting Pocket Guide for Mac OS

CERN Document Server

Lerner, David; Corporation, Tekserve

2009-01-01

The Macintosh Troubleshooting Pocket Guide covers the most common user hardware and software trouble. It's not just a book for Mac OS X (although it includes tips for OS X and Jaguar), it's for anyone who owns a Mac of any type-- there are software tips going back as far as OS 6. This slim guide distills the answers to the urgent questions that Tekserve's employee's answer every week into a handy guide that fits in your back pocket or alongside your keyboard.

A Practical Guide for Building a Digital Library: User-Focused Collection

Science.gov (United States)

Zhu, Qin; Guevara, Sophia

2009-01-01

With changing user expectations, many libraries are moving toward digital content. Accessible from anywhere at any time, digital content provides users with efficient, on-demand information experiences. Accordingly, librarians are presented with challenges and opportunities to build, manage, and implement outreach strategies that promote their…

A buyer's and user's guide to astronomical telescopes & binoculars

CERN Document Server

Mullaney, James

2007-01-01

This exciting, upbeat new guide provides an extensive overview of binoculars and telescopes. It includes detailed up-to-date information on sources, selection and use of virtually every major type, brand and model of such instruments on today's market.

Energy Systems Test Area (ESTA) Pyrotechnic Operations: User Test Planning Guide

Science.gov (United States)

Hacker, Scott

2012-01-01

The Johnson Space Center (JSC) has created and refined innovative analysis, design, development, and testing techniques that have been demonstrated in all phases of spaceflight. JSC is uniquely positioned to apply this expertise to components, systems, and vehicles that operate in remote or harsh environments. We offer a highly skilled workforce, unique facilities, flexible project management, and a proven management system. The purpose of this guide is to acquaint Test Requesters with the requirements for test, analysis, or simulation services at JSC. The guide includes facility services and capabilities, inputs required by the facility, major milestones, a roadmap of the facility s process, and roles and responsibilities of the facility and the requester. Samples of deliverables, facility interfaces, and inputs necessary to define the cost and schedule are included as appendices to the guide.

Underway meteorological, navigational, physical, profile and time series data collected aboard NOAA Ship Henry B. Bigelow in the North Atlantic Ocean from 2012-08-07 to 2012-08-24 (NODC Accession 0125711)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0125711 contains raw underway meteorological, navigational, physical, profile and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, physical, profile and time series data collected aboard NOAA Ship Henry B. Bigelow in the North Atlantic Ocean from 2013-07-01 to 2013-08-18 (NODC Accession 0115902)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0115902 contains raw underway meteorological, navigational, physical, profile and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, optical, physical, profile and time series data collected aboard NOAA Ship Oregon II in the Gulf of Mexico from 2014-06-07 to 2014-07-19 (NODC Accession 0120616)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0120616 contains raw underway meteorological, navigational, optical, physical, profile and time series data logged by the Scientific Computer System...

Underway meteorological, navigational, optical, physical, profile and time series data collected aboard NOAA Ship Hi'ialakai in the North Pacific Ocean from 2013-09-05 to 2013-09-20 (NODC Accession 0113248)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0113248 contains raw underway meteorological, navigational, optical, physical, profile and time series data logged by the Scientific Computer System...

Underway meteorological, navigational, optical, physical, profile and time series data collected aboard NOAA Ship Gordon Gunter in the Gulf of Mexico from 2012-10-19 to 2012-10-29 (NODC Accession 0113519)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0113519 contains raw underway meteorological, navigational, optical, physical, profile and time series data logged by the Scientific Computer System...

Underway meteorological, navigational, physical, profile and time series data collected aboard NOAA Ship Henry B. Bigelow in the North Atlantic Ocean from 2014-07-24 to 2014-07-30 (NODC Accession 0125266)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0125266 contains raw underway meteorological, navigational, physical, profile and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, optical, physical and time series data collected aboard NOAA Ship Oscar Elton Sette in the North Pacific Ocean from 2014-09-25 to 2014-10-27 (NODC Accession 0123056)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0123056 contains raw underway meteorological, navigational, optical, physical and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, physical, profile and time series data collected aboard NOAA Ship Henry B. Bigelow in the North Atlantic Ocean from 2012-05-31 to 2012-06-14 (NODC Accession 0125709)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0125709 contains raw underway meteorological, navigational, physical, profile and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, physical, profile and time series data collected aboard NOAA Ship Henry B. Bigelow in the North Atlantic Ocean from 2012-02-27 to 2012-05-04 (NODC Accession 0125710)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0125710 contains raw underway meteorological, navigational, physical, profile and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, physical, profile and time series data collected aboard NOAA Ship Henry B. Bigelow in the North Atlantic Ocean from 2014-08-05 to 2014-08-16 (NODC Accession 0125265)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0125265 contains raw underway meteorological, navigational, physical, profile and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, physical, profile and time series data collected aboard NOAA Ship Henry B. Bigelow in the North Atlantic Ocean from 2014-06-18 to 2014-07-01 (NODC Accession 0125584)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0125584 contains raw underway meteorological, navigational, physical, profile and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, physical, profile and time series data collected aboard NOAA Ship Henry B. Bigelow in the North Atlantic Ocean from 2013-06-10 to 2013-06-24 (NODC Accession 0115702)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0115702 contains raw underway meteorological, navigational, physical, profile and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, physical, profile and time series data collected aboard NOAA Ship Henry B. Bigelow in the North Atlantic Ocean from 2012-06-18 to 2012-06-28 (NODC Accession 0125666)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0125666 contains raw underway meteorological, navigational, physical, profile and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, physical, profile and time series data collected aboard NOAA Ship Henry B. Bigelow in the North Atlantic Ocean from 2012-07-04 to 2012-07-18 (NODC Accession 0125758)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0125758 contains raw underway meteorological, navigational, physical, profile and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, physical, profile and time series data collected aboard NOAA Ship Henry B. Bigelow in the North Atlantic Ocean from 2012-09-04 to 2012-11-11 (NODC Accession 0125919)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0125919 contains raw underway meteorological, navigational, physical, profile and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, physical, profile and time series data collected aboard NOAA Ship Henry B. Bigelow in the North Atlantic Ocean from 2013-03-14 to 2013-05-09 (NODC Accession 0115052)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0115052 contains raw underway meteorological, navigational, physical, profile and time series data logged by the Scientific Computer System (SCS)...

Underway meteorological, navigational, optical, physical, profile and time series data collected aboard NOAA Ship Oregon II in the Gulf of Mexico from 2013-10-24 to 2013-11-22 (NODC Accession 0116135)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0116135 contains raw underway meteorological, navigational, optical, physical, profile and time series data logged by the Scientific Computer System...

SIMone user's manual. V. 2.1

International Nuclear Information System (INIS)

Silk, M.

1990-03-01

Simone is a computer application program which provides an environment in which to run the nuclear reactor thermal hydraulic simulation code RELAP5. It enables users to run a RELAP5 calculation on-line on a SUN4 workstation, and provides an interactive means of executing operator-like actions. In addition, a version of the graphical post-processing tool ISOVU is incorporated, allowing a real-time display of the RELAP5 calculation to be presented in the form of a system mimic diagram. This report comprises a description of the facilities available within the Simone application, and a user guide describing the user interface. (author)

User's guide to SERICPAC: A computer program for calculating electric-utility avoided costs rates

Energy Technology Data Exchange (ETDEWEB)

Wirtshafter, R.; Abrash, M.; Koved, M.; Feldman, S.

1982-05-01

SERICPAC is a computer program developed to calculate average avoided cost rates for decentralized power producers and cogenerators that sell electricity to electric utilities. SERICPAC works in tandem with SERICOST, a program to calculate avoided costs, and determines the appropriate rates for buying and selling of electricity from electric utilities to qualifying facilities (QF) as stipulated under Section 210 of PURA. SERICPAC contains simulation models for eight technologies including wind, hydro, biogas, and cogeneration. The simulations are converted in a diversified utility production which can be either gross production or net production, which accounts for an internal electricity usage by the QF. The program allows for adjustments to the production to be made for scheduled and forced outages. The final output of the model is a technology-specific average annual rate. The report contains a description of the technologies and the simulations as well as complete user's guide to SERICPAC.

A user's guide to coping with estuarine management bureaucracy: An Estuarine Planning Support System (EPSS) tool.

Science.gov (United States)

Lonsdale, Jemma; Nicholson, Rose; Weston, Keith; Elliott, Michael; Birchenough, Andrew; Sühring, Roxana

2018-02-01

Estuaries are amongst the most socio-economically and ecologically important environments however, due to competing and conflicting demands, management is often challenging with a complex legislative framework managed by multiple agencies. To facilitate the understanding of this legislative framework, we have developed a GISbased Estuarine Planning Support System tool. The tool integrates the requirements of the relevant legislation and provides a basis for assessing the current environmental state of an estuary as well as informing and assessing new plans to ensure a healthy estuarine state. The tool ensures that the information is easily accessible for regulators, managers, developers and the public. The tool is intended to be adaptable, but is assessed using the Humber Estuary, United Kingdom as a case study area. The successful application of the tool for complex socio-economic and environmental systems demonstrates that the tool can efficiently guide users through the complex requirements needed to support sustainable development. Crown Copyright © 2017. Published by Elsevier Ltd. All rights reserved.

Updated users' guide for SAMMY: multilevel R-matrix fits to neutron data using Bayes' equations. Revision 1

International Nuclear Information System (INIS)

Larson, N.M.

1985-04-01

In 1980 the multilevel multichannel R-matrix code SAMMY was released for use in analysis of neutron data at the Oak Ridge Electron Linear Accelerator. Since that time, SAMMY has undergone significant modifications: (1) User-friendly options have been incorporated to streamline common operations and to protect a run from common user errors. (2) The Reich-Moore formalism has been extended to include an optional logarithmic parameterization of the external R-matrix, for which any or all parameters may be varied. (3) The ability to vary sample thickness, effective temperature, matching radius, and/or resolution-broadening parameters has been incorporated. (4) To avoid loss of information (i.e., computer round-off errors) between runs, the ''covariance file'' now includes precise values for all variables. (5) Unused but correlated variables may be included in the analysis. Because of these and earlier changes, the 1980 SAMMY manual is now obsolete. This report is intended to be complete documentation for the current version of SAMMY. In August of 1984 the users' guide for version P of the multilevel multichannel R-matrix code SAMMY was published. Recently, major changes within SAMMY have led to the creation of version O, which is documented in this report. Among these changes are: (1) an alternative matrix-manipulation method for use in certain special cases; (2) division of theoretical cross-section generation and broadening operations into separate segments of the code; (3) an option to use the multilevel Breit-Wigner approximation to generate theoretical cross sections; (4) new input options; (5) renaming all temporary files as SAM...DAT; (6) more sophisticated use of temporary files to maximize the number of data points that may be analyzed in a single run; and (7) significant internal restructing of the code in preparation for changes described here and for planned future changes

The ISIS Open GENIE user manual

International Nuclear Information System (INIS)

Akeroyd, F.A.; Ashworth, R.L.; Campbell, S.I.; Johnston, S.D.; Martin, J.M.; Moreton-Smith, C.M.; Sivia, D.S.

2000-01-01

This manual should enable you to become familiar with Open GENIE quickly and easily. It therefore complements the Open GENIE Reference Manual which should be used to understand the full meaning of Open GENIE commands. The reference manual is accessible on the ISIS web server at: http://www.isis.rl.ac.uk/GENIEReferenceManual/ and the user manual is planned to be accessible by January '98 at http://www.isis.rl.ac.ukIGENIEUserManual/. The Open GENIE User Manual is separated into two parts: Part A. The User Manual. An introduction to the use of Open GENIE. Part B. The Installation Guide. General information on how to install and run Open GENIE. Assuming that you are new to Open GENIE and have just downloaded a copy you will need to consult the Installation Guide to get Open GENIE installed on your machine. After this we recommend you experiment with some of the example files to get an idea of the capabilities of Open GENIE. For further information, comments, additions of routines that you feel should be included, please contact us at genie at isise.rl.ac.uk

Interpreter's Guide to Blackbird Marsh Nature Trail.

Science.gov (United States)

Environmental Studies Center, Pensacola, FL.

This booklet was prepared to help the user interpret the natural history of Blackbird Marsh Nature Trail in Escambia County, Florida, and serves as a guide to the animal and plant life. The publication is part of a series of illustrated guides designed for use by teachers and students of all levels in conjunction with field trips to the 1200-acre…

Rhizobia with 16S rRNA and nifH similar to Mesorhizobium huakuii but Novel recA, glnII, nodA and nodC genes are symbionts of New Zealand Carmichaelinae.

Directory of Open Access Journals (Sweden)

Heng Wee Tan

Full Text Available New Zealand became geographically isolated about 80 million years ago and this separation gave rise to a unique native flora including four genera of legume, Carmichaelia, Clianthus and Montigena in the Carmichaelinae clade, tribe Galegeae, and Sophora, tribe Sophoreae, sub-family Papilionoideae. Ten bacterial strains isolated from NZ Carmichaelinae growing in natural ecosystems grouped close to the Mesorhizobium huakuii type strain in relation to their 16S rRNA and nifH gene sequences. However, the ten strains separated into four groups on the basis of their recA and glnII sequences: all groups were clearly distinct from all Mesorhizobium type strains. The ten strains separated into two groups on the basis of their nodA sequences but grouped closely together in relation to nodC sequences; all nodA and nodC sequences were novel. Seven strains selected and the M. huakuii type strain (isolated from Astragalus sinicus produced functional nodules on Carmichaelia spp., Clianthus puniceus and A. sinicus but did not nodulate two Sophora species. We conclude that rhizobia closely related to M. huakuii on the basis of 16S rRNA and nifH gene sequences, but with variable recA and glnII genes and novel nodA and nodC genes, are common symbionts of NZ Carmichaelinae.

User acceptance testing a step-by-step guide

CERN Document Server

Hambling, Brian

2013-01-01

Every information system brought into service in every type of organisation requires user acceptance testing. This book is a hands-on manual for non-testing specialists to plan and carry out an effective acceptance test of an information system. It also identifies ways of making the process as simple and cost-effective as possible.

CATO--A Guided User Interface for Different CAS

Science.gov (United States)

Janetzko, Hans-Dieter

2017-01-01

CATO is a new user interface, written in Java and developed by the author as a response to the significant difficulties faced by students who only sporadically use computer algebra systems (CAS). The usage of CAS in mathematical lectures should be an integral part of mathematical instruction. However, difficulties arise for those students who have…

Scaled CMOS Technology Reliability Users Guide

Science.gov (United States)

White, Mark

2010-01-01

The desire to assess the reliability of emerging scaled microelectronics technologies through faster reliability trials and more accurate acceleration models is the precursor for further research and experimentation in this relevant field. The effect of semiconductor scaling on microelectronics product reliability is an important aspect to the high reliability application user. From the perspective of a customer or user, who in many cases must deal with very limited, if any, manufacturer's reliability data to assess the product for a highly-reliable application, product-level testing is critical in the characterization and reliability assessment of advanced nanometer semiconductor scaling effects on microelectronics reliability. A methodology on how to accomplish this and techniques for deriving the expected product-level reliability on commercial memory products are provided.Competing mechanism theory and the multiple failure mechanism model are applied to the experimental results of scaled SDRAM products. Accelerated stress testing at multiple conditions is applied at the product level of several scaled memory products to assess the performance degradation and product reliability. Acceleration models are derived for each case. For several scaled SDRAM products, retention time degradation is studied and two distinct soft error populations are observed with each technology generation: early breakdown, characterized by randomly distributed weak bits with Weibull slope (beta)=1, and a main population breakdown with an increasing failure rate. Retention time soft error rates are calculated and a multiple failure mechanism acceleration model with parameters is derived for each technology. Defect densities are calculated and reflect a decreasing trend in the percentage of random defective bits for each successive product generation. A normalized soft error failure rate of the memory data retention time in FIT/Gb and FIT/cm2 for several scaled SDRAM generations is

AirShow 1.0 CFD Software Users' Guide

Science.gov (United States)

Mohler, Stanley R., Jr.

2005-01-01

AirShow is visualization post-processing software for Computational Fluid Dynamics (CFD). Upon reading binary PLOT3D grid and solution files into AirShow, the engineer can quickly see how hundreds of complex 3-D structured blocks are arranged and numbered. Additionally, chosen grid planes can be displayed and colored according to various aerodynamic flow quantities such as Mach number and pressure. The user may interactively rotate and translate the graphical objects using the mouse. The software source code was written in cross-platform Java, C++, and OpenGL, and runs on Unix, Linux, and Windows. The graphical user interface (GUI) was written using Java Swing. Java also provides multiple synchronized threads. The Java Native Interface (JNI) provides a bridge between the Java code and the C++ code where the PLOT3D files are read, the OpenGL graphics are rendered, and numerical calculations are performed. AirShow is easy to learn and simple to use. The source code is available for free from the NASA Technology Transfer and Partnership Office.

PHYTOPLANKTON - WET WEIGHT and Other Data from UNKNOWN and Other Platforms From NE Atlantic (limit-40 W) and Others from 1978-11-01 to 1980-05-31 (NODC Accession 8900286)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data file consists of chlorophyll and other parameter built from existing NODC files F004, water physics/ chemistry, F029, primary productivity, as well as...

Inventory of Federal Energy-Related Environment and Safety Research for FY 1978. Volume III, interactive terminal users guide

Energy Technology Data Exchange (ETDEWEB)

Miller, C. E.; Barker, Janice F.

1979-12-01

This users' guide was prepared to provide interested persons access to, via computer terminals, federally funded energy-related environmental and safety research projects for FY 1978. Although this information is also available in hardbound volumes, this on-line searching capability is expected to reduce the time required to answer ad hoc questions and, at the same time, produce meaningful reports. The data contained in this data base are not exhaustive and represent research reported by the following agencies: Department of Agriculture, Department of Commerce, Department of Defense, Department of Energy, Department of Health, Education, and Welfare, Department of the Interior, Department of Transportation, Federal Energy Administration, National Aeronautics and Space Administration, National Science Foundation, Nuclear Regulatory Commission, Tennessee Valley Authority, U.S. Coast Guard, and the U.S. Environmental Protection Agency.

Distributed Observer Network (DON), Version 3.0, User's Guide

Science.gov (United States)

Mazzone, Rebecca A.; Conroy, Michael P.

2015-01-01

The Distributed Observer Network (DON) is a data presentation tool developed by the National Aeronautics and Space Administration (NASA) to distribute and publish simulation results. Leveraging the display capabilities inherent in modern gaming technology, DON places users in a fully navigable 3-D environment containing graphical models and allows the users to observe how those models evolve and interact over time in a given scenario. Each scenario is driven with data that has been generated by authoritative NASA simulation tools and exported in accordance with a published data interface specification. This decoupling of the data from the source tool enables DON to faithfully display a simulator's results and ensure that every simulation stakeholder will view the exact same information every time.

Underway biological, meteorological, navigational, physical, profile and time series data collected aboard NOAA Ship Henry B. Bigelow in the North Atlantic Ocean from 2014-03-31 to 2014-05-23 (NODC Accession 0119096)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0119096 contains raw underway biological, meteorological, navigational, physical, profile and time series data logged by the Scientific Computer...

Insider safeguards effectiveness model (ISEM). User's guide

International Nuclear Information System (INIS)

Boozer, D.D.; Engi, D.

1977-11-01

A comprehensive presentation of the ISEM computer program is provided. ISEM was designed to evaluate the effectiveness of a fixed-site facility safeguards system in coping with the theft, sabotage, or dispersal of radiological material by a single person who has authorized access to the facility. This insider may be aided by a group of insiders who covertly degrade sensor systems. Each ISEM run evaluates safeguards system performance for a particular scenario specified by the user. The dispatching of guards following alarms and their interaction with the insider are explicitly treated by the model

User's guide to DOE facilities

Energy Technology Data Exchange (ETDEWEB)

1984-01-01

The Department of Energy's research laboratories represent valuable, often unique, resources for university and industrial scientists. It is DOE policy to make these laboratories and facilities available to qualified scientists. The answers to such questions as who are eligible, what and where are the facilities, what is the cost, when can they be used, are given. Data sheets are presented for each facility to provide information such as location, user contact, description of research, etc. A subject index refers to areas of research and equipment available.

Adaptation of the European Commission-recommended user testing method to patient medication information leaflets in Japan

Directory of Open Access Journals (Sweden)

Yamamoto M

2017-06-01

Full Text Available Michiko Yamamoto,1 Hirohisa Doi,1 Ken Yamamoto,2 Kazuhiro Watanabe,2 Tsugumichi Sato,3 Machi Suka,4 Takeo Nakayama,5 Hiroki Sugimori6 1Department of Drug Informatics, Center for Education & Research on Clinical Pharmacy, Showa Pharmaceutical University, Tokyo, Japan; 2Department of Pharmacy Practice, Center for Education & Research on Clinical Pharmacy, Showa Pharmaceutical University, Tokyo, Japan; 3Faculty of Pharmaceutical Sciences, Tokyo University of Science, Chiba, Japan; 4Department of Public Health and Environmental Medicine, The Jikei University School of Medicine, Tokyo, Japan; 5Department of Health Informatics, Kyoto University School of Public, Kyoto, Japan; 6Department of Preventive Medicine, Graduate School of Sports and Health Sciences, Daito Bunka University, Saitama, Japan Background: The safe use of drugs relies on providing accurate drug information to patients. In Japan, patient leaflets called Drug Guide for Patients are officially available; however, their utility has never been verified. This is the first attempt to improve Drug Guide for Patients via user testing in Japan.Purpose: To test and improve communication of drug information to minimize risk for patients via user testing of the current and revised versions of Drug Guide for Patients, and to demonstrate that this method is effective for improving Drug Guide for Patients in Japan.Method: We prepared current and revised versions of the Drug Guide for Patients and performed user testing via semi-structured interviews with consumers to compare these versions for two guides for Mercazole and Strattera. We evenly divided 54 participants into two groups with similar distributions of sex, age, and literacy level to test the differing versions of the Mercazole guide. Another group of 30 participants were divided evenly to test the versions of the Strattera guide. After completing user testing, the participants evaluated both guides in terms of amount of information

A computed tomographic anatomical study of the upper sacrum. Application for a user guide of pelvic fixation with iliosacral screws in adult spinal deformity.

Science.gov (United States)

Dubory, Arnaud; Bouloussa, Houssam; Riouallon, Guillaume; Wolff, Stéphane

2017-12-01

Widely used in traumatic pelvic ring fractures, the iliosacral (IS) screw technique for spino-pelvic fixation remains anecdotal in adult spinal deformity. The objective of this study was to assess anatomical variability of the adult upper sacrum and to provide a user guide of spino-pelvic fixation with IS screws in adult spinal deformity. Anatomical variability of the upper sacrum according to age, gender, height and weight was sought on 30 consecutive pelvic CT-scans. Thus, a user guide of spino-pelvic fixation with IS screws was modeled and assessed on ten CT-scans as described below. Two invariable landmarks usable during the surgical procedure were defined: point A (corresponding to the connector binding the IS screw to the spinal rod), equidistant from the first posterior sacral hole and the base of the S1 articular facet and 10 mm-embedded into the sacrum; point B (corresponding to the tip of the IS screw) located at the junction of the anterior third and middle third of the sacral endplate in the sagittal plane and at the middle of the endplate in the coronal plane. Point C corresponded to the intersection between the A-B direction and the external facet of the iliac wing. Three-dimensional reconstructions modeling the IS screw optimal direction according to the A-B-C straight line were assessed. Age had no effect on the anatomy of the upper sacrum. The distance between the base of the S1 superior articular facet and the top of the first posterior sacral hole was correlated with weight (r = 0.6; 95% CI [0.6-0.9]); p guide of spinopelvic fixation with IS screws seems to be reliable and reproducible independently of age, gender and morphologic characteristics but needs clinical assessment. Level IV.

Underway meteorological, navigational, optical, physical, profile and time series data collected aboard NOAA Ship Bell M. Shimada in the North Pacific Ocean from 2015-01-31 to 2015-02-04 (NODC Accession 0125756)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0125756 contains raw underway meteorological, navigational, optical, physical, profile and time series data logged by the Scientific Computer System...

Underway meteorological, navigational, optical, physical, profile and time series data collected aboard NOAA Ship Bell M. Shimada in the North Pacific Ocean from 2015-03-07 to 2015-03-22 (NODC Accession 0126660)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0126660 contains raw underway meteorological, navigational, optical, physical, profile and time series data logged by the Scientific Computer System...

Underway meteorological, navigational, optical, physical, profile, time series and trawl data collected aboard NOAA Ship Gordon Gunter in the Gulf of Mexico from 2014-08-21 to 2014-09-30 (NODC Accession 0122396)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0122396 contains raw underway meteorological, navigational, optical, physical, profile, time series and trawl data logged by the Scientific Computer...

Underway meteorological, navigational, optical, physical, profile and time series data collected aboard NOAA Ship Bell M. Shimada in the North Pacific Ocean from 2014-04-15 to 2014-05-12 (NODC Accession 0118545)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0118545 contains raw underway meteorological, navigational, optical, physical, profile and time series data logged by the Scientific Computer System...

Underway meteorological, navigational, optical, physical, profile and time series data collected aboard NOAA Ship Bell M. Shimada in the North Pacific Ocean from 2013-03-01 to 2013-03-10 (NODC Accession 0116096)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0116096 contains raw underway meteorological, navigational, optical, physical, profile and time series data logged by the Scientific Computer System...

Underway meteorological, navigational, optical, physical, profile, time series and trawl data collected aboard NOAA Ship Gordon Gunter in the North Atlantic Ocean from 2014-03-11 to 2014-04-28 (NODC Accession 0118186)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — NODC Accession 0118186 contains raw underway meteorological, navigational, optical, physical, profile, time series and trawl data logged by the Scientific Computer...

Good Practice Guide Waste Minimization/Pollution Prevention

Energy Technology Data Exchange (ETDEWEB)

J Dorsey

1999-10-14

This Good Practice Guide provides tools, information, and examples for promoting the implementation of pollution prevention during the design phases of U.S. Department of Energy (DOE) projects. It is one of several Guides for implementing DOE Order 430.1, Life-cycle Asset Management. DOE Order 430.1 provides requirements for DOE, in partnership with its contractors, to plan, acquire, operate, maintain, and dispose of physical assets. The goals of designing for pollution prevention are to minimize raw material consumption, energy consumption, waste generation, health and safety impacts, and ecological degradation over the entire life of the facility (EPA 1993a). Users of this Guide will learn to translate national policy and regulatory requirements for pollution prevention into action at the project level. The Guide was written to be applicable to all DOE projects, regardless of project size or design phase. Users are expected to interpret the Guide for their individual project's circumstances, applying a graded approach so that the effort is consistent with the anticipated waste generation and resource consumption of the physical asset. This Guide employs a combination of pollution prevention opportunity assessment (PPOA) methods and design for environment (DfE) philosophies. The PPOA process was primarily developed for existing products, processes, and facilities. The PPOA process has been modified in this Guide to address the circumstances of the DOE design process as delineated in DOE Order 430.1 and its associated Good Practice Guides. This modified form of the PPOA is termed the Pollution Prevention Design Assessment (P2DA). Information on current nationwide methods and successes in designing for the environment also have been reviewed and are integrated into this guidance.

TOTAL user manual

Science.gov (United States)

Johnson, Sally C.; Boerschlein, David P.

1994-01-01

Semi-Markov models can be used to analyze the reliability of virtually any fault-tolerant system. However, the process of delineating all of the states and transitions in the model of a complex system can be devastatingly tedious and error-prone. Even with tools such as the Abstract Semi-Markov Specification Interface to the SURE Tool (ASSIST), the user must describe a system by specifying the rules governing the behavior of the system in order to generate the model. With the Table Oriented Translator to the ASSIST Language (TOTAL), the user can specify the components of a typical system and their attributes in the form of a table. The conditions that lead to system failure are also listed in a tabular form. The user can also abstractly specify dependencies with causes and effects. The level of information required is appropriate for system designers with little or no background in the details of reliability calculations. A menu-driven interface guides the user through the system description process, and the program updates the tables as new information is entered. The TOTAL program automatically generates an ASSIST input description to match the system description.

NEOS Server 4.0 Administrative Guide

OpenAIRE

Dolan, Elizabeth D.

2001-01-01

The NEOS Server 4.0 provides a general Internet-based client/server as a link between users and software applications. The administrative guide covers the fundamental principals behind the operation of the NEOS Server, installation and trouble-shooting of the Server software, and implementation details of potential interest to a NEOS Server administrator. The guide also discusses making new software applications available through the Server, including areas of concern to remote solver adminis...