WorldWideScience

Sample records for networks semiannual technical

  1. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimise the management of the Technical Network (TN), to facilitate understanding of the purpose of devices connected to the TN and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive e-mails from IT/CS asking them to add the corresponding information in the network database at "network-cern-ch". Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  2. Technical Network

    CERN Multimedia

    2007-01-01

    In order to optimize the management of the Technical Network (TN), to ease the understanding and purpose of devices connected to the TN, and to improve security incident handling, the Technical Network Administrators and the CNIC WG have asked IT/CS to verify the "description" and "tag" fields of devices connected to the TN. Therefore, persons responsible for systems connected to the TN will receive email notifications from IT/CS asking them to add the corresponding information in the network database. Thank you very much for your cooperation. The Technical Network Administrators & the CNIC WG

  3. Semi-annual technical report, September 30, 1999 - March 31, 2000

    Energy Technology Data Exchange (ETDEWEB)

    Schumacher, Dorin

    2000-04-01

    The Consortium for Plant Biotechnology Research, Inc. (CPBR) continues to operate according to objectives outlined in the proposal funded through the cooperative agreement. The italicized objectives below are addressed in this report, which covers the period September 30,1999 through March 31, 2000. (1) Update the research agenda using information obtained from member companies. (2) Identify and implement research projects that are deemed by industrial, scientific, and sponsoring agency evaluation to address significantly the problems and future of U.S. energy resources and that are relevant to the Department of Energy's mission. Specifically: (1) Announce research grants competition through a Request for Preproposals. (2) Conduct a dual-stage review process: Stage one--industrial and DOE review of preproposals; and Stage two--peer review, scientific consultants' review, DOE review of full proposals and Project Recommendation Committee evaluation and recommendation for funding. (3) Board of Directors approval of recommended awards. (4) Conduct ongoing project management. (5) Obtain semiannual, annual and final reports for evaluation of research goals and technology transfer. (6) Present reports to DOE.

  4. SPACE-R Thermionic Space Nuclear Power System: Design and Technology Demonstration Program. Semiannual technical progress report for period ending March 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    This Semiannual Technical Progress Report summarizes the technical progress and accomplishments for the Thermionic Space Nuclear Power System (TI-SNPS) Design and Technology Demonstration Program of the Prime Contractor, Space Power Incorporated (SPI), its subcontractors and supporting National Laboratories during the first half of the Government Fiscal Year (GFY) 1993. SPI`s subcontractors and supporting National Laboratories include: Babcock & Wilcox for the reactor core and externals; Space Systems/Loral for the spacecraft integration; Thermocore for the radiator heat pipes and the heat exchanger; INERTEK of CIS for the TFE, core elements and nuclear tests; Argonne National Laboratories for nuclear safety, physics and control verification; and Oak Ridge National laboratories for materials testing. Parametric trade studies are near completion. However, technical input from INERTEK has yet to be provided to determine some of the baseline design configurations. The INERTEK subcontract is expected to be initiated soon. The Point Design task has been initiated. The thermionic fuel element (TFE) is undergoing several design iterations. The reactor core vessel analysis and design has also been started.

  5. The development of coal-based technologies for Department of Defense facilities. Volume 2, Appendices. Semiannual technical progress report, September 28, 1994--March 27, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Bartley, D.A.; Hatcher, P. [Pennsylvania State Univ., University Park, PA (United States). Energy and Fuels Research Center] [and others

    1996-10-15

    This semiannual progress report contains the following appendices: description of the 1,000 lb steam/h watertube research boiler; the Pennsylvania CGE model; Phase II, subtask 3.9 coal market analysis; the CGE model; and sector definition.

  6. End of Interactive Emailing from the Technical Network

    CERN Multimedia

    2006-01-01

    According to the CNIC Security Policy for Control Systems (EDMS #584092), interactive emailing on PCs (and other devices) connected to the Technical Network is prohibited. Please note that from November 6th, neither reading emails nor sending emails interactively using e.g. Outlook or Pine mail clients on PCs connected to the Technical Network will be possible anymore. However, automatically generated emails will not be blocked and can still be sent off using CERNMX.CERN.CH as mail server. These restrictions DO NOT apply to PCs connected to any other network, like the General Purpose (or office) network. If you have questions, please do not hesitate to contact Uwe Epting, Pierre Charrue or Stefan Lueders (Technical-Network.Administrator@cern.ch). Your CNIC Working Group

  7. Network design management and technical perspectives

    CERN Document Server

    Piliouras, Teresa C

    2004-01-01

    MAKING THE BUSINESS CASE FOR THE NETWORKManagement Overview of Network DesignDefine the Business ObjectivesDetermine Potential Risks, Dependencies, Costs andBenefitsIdentify Project RequirementsDevelop Project Implementation ApproachStrategic Positioning Using NetworksCase StudiesCalculation of Technology's Strategic ValueDealing with Major Design ChallengesOrganizational Concerns and RecommendationsTechnology Concerns and RecommendationsSimilarities and Differences between Voice and DataNetwork Design and PlanningMajor Trends and Technology EnablersSocietal TrendsService Provider TrendsMajor

  8. Gigabit network technology. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Davenport, C.M.C. [ed.

    1996-10-01

    Current digital networks are evolving toward distributed multimedia with a wide variety of applications with individual data rates ranging from kb/sec to tens and hundreds of Mb/sec. Link speed requirements are pushing into the Gb/sec range and beyond the envelop of electronic networking capabilities. There is a vast amount of untapped bandwidth available in the low-attenuation communication bands of an optical fiber. The capacity in one fiber thread is enough to carry more than two thousand times as much information as all the current radio and microwave frequencies. And while fiber optics has replaced copper wire as the transmission medium of choice, the communication capacity of conventional fiber optic networks is ultimately limited by electronic processing speeds.

  9. The development of coal-based technologies for Department of Defense Facilities. Semiannual technical progress report, March 28, 1993--September 27, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Morrison, J.L.; Sharifi, R. [Pennsylvania State Univ., University Park, PA (United States). Energy and Fuels Research Center] [and others

    1993-12-17

    The US DOD, through an Interagency Agreement with the US DOE, has initiated a three-phase program with the Consortium for Coal-Water Slurry Fuel Technology, with the aim of decreasing DOD`s reliance on imported oil by increasing its use of coal. The program is being conducted as a cooperative agreement between the Consortium and DOE and the first phase of the program is underway. A team of researchers has been assembled from Penn State, ABB Combustion Engineering Systems (CE), AMAX Research and Development Center (AMAX), and Energy and Environmental Research Corporation (EER). These four organizations are the current members of the Consortium. Phase 1 activities are focused on developing clean, coal-based combustion technologies for the utilization of both micronized coal-water slurry fuels (MCWSFs) and dry, micronized coal (DMC) in fuel oil-designed industrial boilers. Phase 2 research and development activities will continue to focus on industrial boiler retrofit technologies by addressing emissions control and pre-combustion strategies for the utilization of high ash, high sulfur coals. Phase 3 activities will examine coal-based fuel combustion systems that cofire wastes. Each phase includes an engineering cost analysis and technology assessment. The activities and status of Phase 1 are described in this report. The objective of Phase 1 is to deliver fully engineered retrofit options for a fuel oil-designed watertube boiler located on a DOD installation to fire either MCWSF or DMC. This will be achieved through a program of the following tasks: (1) Coal Beneficiation and Preparation; (2) Combustion Performance Evaluation; (3) Engineering Design; (4) Engineering and Economic Analysis; and (5) Final Report/Submission of Design Package. Miscellaneous activities are reported. Activities planned for the next semiannual period are listed. The project schedule, with a description of milestones, is included.

  10. Monday 9 January 2006: RESTRICTED ACCESS to the Technical Network

    CERN Multimedia

    CNIC Users Exchange and IT/CS

    2005-01-01

    As of Monday 9 January 2006, Ethernet access from the general CERN network to the Technical Network (TN) will be restricted in order to improve security on the TN. As a result, all Ethernet communication between the General Purpose Network (GPN) and the TN will be filtered. Only communication lines to the general IT services such as DNS, TP, NICE, DFS, AFS, Antivirus, Linux installation servers, License servers, OracleDB, TSM backup servers and dedicated AB and TS servers on the GPN will remain open. Please make sure that all your devices are registered properly in the network database (LANDB): http://network.cern.ch/. You are encouraged to make proper use of the 'Tag' and 'Description' fields in order to identify your system later on. If your system depends on special services on the GPN or is split between the GPN and the TN, e.g. consists of devices (PCs, PLCs, VME crates, webcams, etc.) connected to both the TN and the GPN, please contact the Technical-Network.Administrator@cern.ch . They will include...

  11. Socio-technical networks: how a technology studies approach may help to solve problems related to technical change

    NARCIS (Netherlands)

    Elzen, Boelem; Enserink, Bert; Enserink, B.; Smit, Willem A.

    1996-01-01

    This paper is motivated by a desire to deal with the problematic aspects of technical development. To achieve this, we need a new approach to the analysis of socio-technical change. In this paper we develop such an approach, called the `Socio-Technical Networks' (STN) approach. The basic concepts of

  12. THE SUPPORTING OF EXPLOITATION AND MAINTENANCE MANAGEMENT WITHIN NETWORKED TECHNICAL SYSTEMS

    OpenAIRE

    Dąbrowski, Marcin

    2015-01-01

    Network technical systems are complex systems, which include distribution networks with devices and engineering objects supporting their work. These kind of systems are used for media distribution, such as: drinking water, fuel, gas, heat, etc. One of specific features of this system is large territorial dispersion of technical objects within the system. The exploitation specificity of networked technical systems requires a special approach for implementing maintenance and repair work, taking...

  13. THE SUPPORTING OF EXPLOITATION AND MAINTENANCE MANAGEMENT WITHIN NETWORKED TECHNICAL SYSTEMS

    Directory of Open Access Journals (Sweden)

    Marcin DĄBROWSKI

    2015-04-01

    Full Text Available Network technical systems are complex systems, which include distribution networks with devices and engineering objects supporting their work. These kind of systems are used for media distribution, such as: drinking water, fuel, gas, heat, etc. One of specific features of this system is large territorial dispersion of technical objects within the system. The exploitation specificity of networked technical systems requires a special approach for implementing maintenance and repair work, taking into account the large territorial dispersion of their components and limited access to technical infra-structure. The features pointed above show the difference between networked technical system and the typical industri-al technical objects (e.g. available in manufacturing plants. This difference also requires the use of specific IT tools for maintenance management. This article discusses examples of selected tools in this class.

  14. Development of TRITN : In-house technical information network of Technical Research Institute in The Chugoku Electric Power Co., Inc.

    Science.gov (United States)

    Ebara, Hisao

    With the increase in information amount, progress in information network, diversified technology and change in in-house organization the Technical Research Institute has necessitated to shift the conventional technical database processing by use of personal computers into new system promised for future use. It enables to; provide classification system which meets the needs of the institute; execute distributed processing using workstations; make the low cost processing using commercial softwares; make networks using LAN, WAN personal computer communication, and provide primary materials (text data) on facsimiles using optical disks. Such features are those of technical information database system "TRITN" which is available to any persons and at any time. This paper describes how TRITN was developed and the system outline.

  15. 12 CFR 8.2 - Semiannual assessment.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Semiannual assessment. 8.2 Section 8.2 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY ASSESSMENT OF FEES § 8.2 Semiannual assessment. (a) Each national bank shall pay to the Comptroller of the Currency a semiannual assessment fee, due by March 31 and September 30 of...

  16. Fusion materials semiannual progress report for period ending December 31, 1999

    Energy Technology Data Exchange (ETDEWEB)

    Burn, G.

    2000-03-01

    This is the twenty-seventh in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components.

  17. Unconventional gas recovery program. Semi-annual report for the period ending September 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Manilla, R.D. (ed.)

    1980-04-01

    This document is the third semi-annual report describing the technical progress of the US DOE projects directed at gas recovery from unconventional sources. Currently the program includes Methane Recovery from Coalbeds Project, Eastern Gas Shales Project, Western Gas Sands Project, and Geopressured Aquifers Project.

  18. Technical report on prototype intelligent network flow optimization (INFLO) dynamic speed harmonization and queue warning.

    Science.gov (United States)

    2015-06-01

    This Technical Report on Prototype Intelligent Network Flow Optimization (INFLO) Dynamic Speed Harmonization and : Queue Warning is the final report for the project. It describes the prototyping, acceptance testing and small-scale : demonstration of ...

  19. School Leadership in Networked Schools: Deciphering the Impact of Large Technical Systems on Education.

    Science.gov (United States)

    Davidson, Judith; Olson, Matthew

    2003-01-01

    Examines electronic networks leadership in education from perspective of the social nature of large technical systems. Focuses on the concepts of translation and social communication spaces. (Contains 31 references.)(PKP)

  20. Investigating the Evolution of Key Member Roles in Socio-Technical Networks--Introducing the Composite Role Framework

    Science.gov (United States)

    Lid, Viil

    2013-01-01

    The vitality of socio-technical networks, like online communities and social networks, is predominantly dependent upon active member participation. In most socio-technical networks a minority of members participate more than others and thus play key roles that sustain the value of the network. The overarching objective of this study was to extend…

  1. Department of Interior Semiannual Regulatory Agenda

    Science.gov (United States)

    2010-04-26

    ... Part IX Department of the Interior Semiannual Regulatory Agenda ] DEPARTMENT OF THE INTERIOR (DOI) DEPARTMENT OF THE INTERIOR Office of the Secretary 25 CFR Ch. I 30 CFR Chs. II and VII 36 CFR Ch. I 43 CFR... the Secretary, Interior. ACTION: Semiannual regulatory agenda. SUMMARY: This notice provides the...

  2. Department of Commerce Semiannual Regulatory Agenda

    Science.gov (United States)

    2010-04-26

    ... Part IV Department of Commerce Semiannual Regulatory Agenda ] DEPARTMENT OF COMMERCE (DOC) DEPARTMENT OF COMMERCE Office of the Secretary 13 CFR Ch. III 15 CFR Subtitle A; Subtitle B, Chs. I, II, III..., and VI Spring 2010 Semiannual Agenda of Regulations AGENCY: Office of the Secretary, Commerce. ACTION...

  3. 76 FR 40200 - Semiannual Regulatory Flexibility Agenda

    Science.gov (United States)

    2011-07-07

    ... Semiannual Regulatory Flexibility Agenda AGENCY: Board of Governors of the Federal Reserve System. ACTION: Semiannual regulatory agenda. SUMMARY: The Board is issuing this agenda under the Regulatory Flexibility Act... rules the Board has selected for review under section 610(c) of the Regulatory Flexibility Act, and...

  4. Network Security: What Non-Technical Administrators Must Know

    Science.gov (United States)

    Council, Chip

    2005-01-01

    Now it is increasingly critical that community college leaders become involved in network security and partner with their directors of information technology (IT). Network security involves more than just virus protection software and firewalls. It involves vigilance and requires top executive support. Leaders can help their IT directors to…

  5. Semantic Network-based Approach to Studying the Choice of Lexis in Definitions of Technical Terms

    Directory of Open Access Journals (Sweden)

    Maxim Nikolayevich Latu

    2016-11-01

    Full Text Available This paper is devoted to the study of vocabulary units that are used in definitions of technical terms with the help of semantic network analysis. Since a semantic network represents a model of a definite system of knowledge it is claimed that it may reveal what predetermines the choice of adjacent technical terms as well as words of general vocabulary in definitions of technical terms denoting academic concepts that belong to different categories. The research demonstrates how some prototypic semantic schemes that consist of semantic relations of definite type between the adjacent technical terms of certain categories are reflected in definitions. The examples are mainly drawn from the actively developing terminologies of nanotechnology and space research as well as physics when necessary.

  6. Strategic Networking in the Technical HEI‘s of the Baltic Sea Region

    Directory of Open Access Journals (Sweden)

    Justas Nugaras

    2012-12-01

    Full Text Available This paper presents the results of the empirical research of the networking of Technical Higher Education Institutions (HEI‘S of the Baltic Sea region. The research was conducted in order to understand how the Social Network Analysis (SNA and network mapping methods could help to strengthen institution’s strategic perspective through networking. The author analyse the interaction phenomena in the Higher education sector; its’ impact for networking of institutions and for the network itself; the role of the position in the networks; abilities to strengthen the node’s perception of the network for the strategizing purposes. The research was based on the SNA of the Erasmus programme student mobility data. The results of the research cover the implications of aspects of the network centrality, clustering and ego networks let to identify the node’s position in the network, and to understand surrounding network. The research disclosed that the SNA could be applied in supporting the strategizing process by: increasing of understanding of embedded networks, having more realistic network picture, also could be used as supplement evaluation and development planning method for the relationships portfolio management for HEI’s.

  7. Care Networking: A Study of Technical Mediations in a Home Telecare Service

    Directory of Open Access Journals (Sweden)

    Miquel Domènech

    2013-07-01

    Full Text Available This article examines the processes of technical mediation within familial care networks based on a study of home telecare targeted at older people. Supported by contributions from the actor—network theory as part of the social psychology of science and technology, these processes of technical mediation are analyzed using a qualitative approach. The data were gathered through six focus groups and four in-depth interviews; the participants in the study included users, relatives and formal carers. Thematic analysis techniques encompassing the information were used, revealing the effects on the patterns of caring relationships. The results show the interplay between presence-absence made possible by the devices; the two-way direction of care between the older people and the artifacts; and the process of sustaining care using the technology. We conclude that care should be seen as a socio-technical network where technology plays an active role in sustaining family relationships.

  8. Care Networking: A Study of Technical Mediations in a Home Telecare Service

    Science.gov (United States)

    Correa, Gonzalo; Domènech, Miquel

    2013-01-01

    This article examines the processes of technical mediation within familial care networks based on a study of home telecare targeted at older people. Supported by contributions from the actor—network theory as part of the social psychology of science and technology, these processes of technical mediation are analyzed using a qualitative approach. The data were gathered through six focus groups and four in-depth interviews; the participants in the study included users, relatives and formal carers. Thematic analysis techniques encompassing the information were used, revealing the effects on the patterns of caring relationships. The results show the interplay between presence-absence made possible by the devices; the two-way direction of care between the older people and the artifacts; and the process of sustaining care using the technology. We conclude that care should be seen as a socio-technical network where technology plays an active role in sustaining family relationships. PMID:23880730

  9. CLASSIFICATION OF NEURAL NETWORK FOR TECHNICAL CONDITION OF TURBOFAN ENGINES BASED ON HYBRID ALGORITHM

    Directory of Open Access Journals (Sweden)

    Valentin Potapov

    2016-12-01

    Full Text Available Purpose: This work presents a method of diagnosing the technical condition of turbofan engines using hybrid neural network algorithm based on software developed for the analysis of data obtained in the aircraft life. Methods: allows the engine diagnostics with deep recognition to the structural assembly in the presence of single structural damage components of the engine running and the multifaceted damage. Results: of the optimization of neural network structure to solve the problems of evaluating technical state of the bypass turbofan engine, when used with genetic algorithms.

  10. Final Technical Report for Terabit-scale hybrid networking project.

    Energy Technology Data Exchange (ETDEWEB)

    Veeraraghavan, Malathi [Univ. of Virginia, Charlottesville, VA (United States)

    2015-12-12

    This report describes our accomplishments and activities for the project titled Terabit-Scale Hybrid Networking. The key accomplishment is that we developed, tested and deployed an Alpha Flow Characterization System (AFCS) in ESnet. It is being run in production mode since Sept. 2015. Also, a new QoS class was added to ESnet5 to support alpha flows.

  11. Phosphorimager and PD densitometer imaging system network. Technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-05-01

    This document discusses the research projects undertaken as a result of the availability of the PhosphorImager and PD Densitometer Imaging System Network, at the University of Georgia`s Complex Carbohydrate Research Center. The benefit gained from the equipment is described for each project.

  12. SEMANTIC NETWORKS: THEORETICAL, TECHNICAL, METHODOLOGIC AND ANALYTICAL ASPECTS

    Directory of Open Access Journals (Sweden)

    José Ángel Vera Noriega

    2005-09-01

    Full Text Available This work is a review of the methodological procedures and cares for the measurement of the connotative meanings which will be used in the elaboration of instruments with ethnic validity. Beginning from the techniques originally proposed by Figueroa et al. (1981 and later described by Lagunes (1993, the intention is to offer a didactic panorama to carry out the measurement by semantic networks introducing some recommendations derived from the studies performed with this method.

  13. The system of technical diagnostics of the industrial safety information network

    Science.gov (United States)

    Repp, P. V.

    2017-01-01

    This research is devoted to problems of safety of the industrial information network. Basic sub-networks, ensuring reliable operation of the elements of the industrial Automatic Process Control System, were identified. The core tasks of technical diagnostics of industrial information safety were presented. The structure of the technical diagnostics system of the information safety was proposed. It includes two parts: a generator of cyber-attacks and the virtual model of the enterprise information network. The virtual model was obtained by scanning a real enterprise network. A new classification of cyber-attacks was proposed. This classification enables one to design an efficient generator of cyber-attacks sets for testing the virtual modes of the industrial information network. The numerical method of the Monte Carlo (with LPτ - sequences of Sobol), and Markov chain was considered as the design method for the cyber-attacks generation algorithm. The proposed system also includes a diagnostic analyzer, performing expert functions. As an integrative quantitative indicator of the network reliability the stability factor (Kstab) was selected. This factor is determined by the weight of sets of cyber-attacks, identifying the vulnerability of the network. The weight depends on the frequency and complexity of cyber-attacks, the degree of damage, complexity of remediation. The proposed Kstab is an effective integral quantitative measure of the information network reliability.

  14. The technical CCDs in ESPRESSO: usage, performances, and network requirements

    Science.gov (United States)

    Calderone, G.; Baldini, V.; Cirami, R.; Coretti, I.; Cristiani, S.; Di Marcantonio, P.; Landoni, M.; Mégevand, D.; Riva, M.; Santin, P.

    2016-07-01

    The Echelle Spectrograph for Rocky Exoplanets and Stable Spectral Observations (ESPRESSO) requires active-loop stabilization of the light path from the telescope to the spectrograph, in order to achieve its centimeter-per- second precision goal. This task is accomplished by moving the mirrors placed along the light path by means of piezoelectric actuators. Two cameras are used to acquire the field and pupil images, and the required corrections are dynamically calculated and applied to the piezos. In this paper we will discuss the camera usage, performance and network bandwidth requirements for the ESPRESSO scientific operations.

  15. Outreach and Technical Assistance Network. Two Year Evaluation Report. December 1, 1989 - November 30, 1991.

    Science.gov (United States)

    Hacienda La Puente Unified School District, City of Industry, CA.

    The staff development component of the Outreach and Technical Assistance Network (OTAN) began the second year of operation with all 11 resource centers active. Constant emphasis and assistance was given to providing staff development through the centers. English as a Second Language (ESL) Institutes for Experienced Teachers were scheduled on a…

  16. Identifying Students' Difficulties When Learning Technical Skills via a Wireless Sensor Network

    Science.gov (United States)

    Wang, Jingying; Wen, Ming-Lee; Jou, Min

    2016-01-01

    Practical training and actual application of acquired knowledge and techniques are crucial for the learning of technical skills. We established a wireless sensor network system (WSNS) based on the 5E learning cycle in a practical learning environment to improve students' reflective abilities and to reduce difficulties for the learning of technical…

  17. A Technical Approach on Large Data Distributed Over a Network

    Directory of Open Access Journals (Sweden)

    Suhasini G

    2011-12-01

    Full Text Available Data mining is nontrivial extraction of implicit, previously unknown and potential useful information from the data. For a database with number of records and for a set of classes such that each record belongs to one of the given classes, the problem of classification is to decide the class to which the given record belongs. The classification problem is also to generate a model for each class from given data set. We are going to make use of supervised classification in which we have training dataset of record, and for each record the class to which it belongs is known. There are many approaches to supervised classification. Decision tree is attractive in data mining environment as they represent rules. Rules can readily expressed in natural languages and they can be even mapped o database access languages. Now a days classification based on decision trees is one of the important problems in data mining   which has applications in many areas.  Now a days database system have become highly distributed, and we are using many paradigms. we consider the problem of inducing decision trees in a large distributed network of highly distributed databases. The classification based on decision tree can be done on the existence of distributed databases in healthcare and in bioinformatics, human computer interaction and by the view that these databases are soon to contain large amounts of data, characterized by its high dimensionality. Current decision tree algorithms would require high communication bandwidth, memory, and they are less efficient and scalability reduces when executed on such large volume of data. So there are some approaches being developed to improve the scalability and even approaches to analyse the data distributed over a network.[keywords: Data mining, Decision tree, decision tree induction, distributed data, classification

  18. Ordinance on technical requirements and conditions of use of optical distribution networks of the Croatian regulatory agency - Analysis and outlook

    OpenAIRE

    Brusić, Igor; Kittl, Jörg; Ruhle, Ernst-Olav; Žuti, Vladimir

    2011-01-01

    In September 2010 the Croatian regulatory agency (HAKOM) put in force the ordinance on technical requirements and conditions of use of optical distribution networks. With this ordinance the Croatian regulatory agency is looking over the rim by proposing a rather technical approach for the rollout of optical access networks which will have significant influence on the deployment of next generation access networks (NGAN) in Croatia. The ordinance stipulates the requirements that have to be fulf...

  19. THE TECHNICAL PARAMETRS AND ROAD NETWORK IN THE JAKUBOWICE KONINSKIE VILLAGE

    Directory of Open Access Journals (Sweden)

    Antoni Grzywna

    2017-07-01

    Full Text Available Parameters of agricultural transport network are an important element that affects the operating costs of farms. The proper shape of the road network, suitable density and the quality should provide a opportune and efficient transport between home farm and some of the parcels. The article presents an evaluation of the agricultural road network in the village of Jakubowice Koninskie in the Niemce commune. An inventory of the study area was conducted, and the road density index, the road extension index, and technical parameters (the width of the roads and the type of their surface. When the area of the village of 638 hectares and a total length of roads 35.44 km the road density index was 55 m•ha-1. Due to the surface the largest share in the structure of length are dirt and concrete roads.

  20. Recovery Act: Energy Efficiency of Data Networks through Rate Adaptation (EEDNRA) - Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Matthew Andrews; Spyridon Antonakopoulos; Steve Fortune; Andrea Francini; Lisa Zhang

    2011-07-12

    This Concept Definition Study focused on developing a scientific understanding of methods to reduce energy consumption in data networks using rate adaptation. Rate adaptation is a collection of techniques that reduce energy consumption when traffic is light, and only require full energy when traffic is at full provisioned capacity. Rate adaptation is a very promising technique for saving energy: modern data networks are typically operated at average rates well below capacity, but network equipment has not yet been designed to incorporate rate adaptation. The Study concerns packet-switching equipment, routers and switches; such equipment forms the backbone of the modern Internet. The focus of the study is on algorithms and protocols that can be implemented in software or firmware to exploit hardware power-control mechanisms. Hardware power-control mechanisms are widely used in the computer industry, and are beginning to be available for networking equipment as well. Network equipment has different performance requirements than computer equipment because of the very fast rate of packet arrival; hence novel power-control algorithms are required for networking. This study resulted in five published papers, one internal report, and two patent applications, documented below. The specific technical accomplishments are the following: • A model for the power consumption of switching equipment used in service-provider telecommunication networks as a function of operating state, and measured power-consumption values for typical current equipment. • An algorithm for use in a router that adapts packet processing rate and hence power consumption to traffic load while maintaining performance guarantees on delay and throughput. • An algorithm that performs network-wide traffic routing with the objective of minimizing energy consumption, assuming that routers have less-than-ideal rate adaptivity. • An estimate of the potential energy savings in service-provider networks

  1. Semiannual patents review, July-December 1998

    Science.gov (United States)

    Matthew. Stroika; Marguerite. Sykes; Julie. Blankenburg

    1999-01-01

    This review summarizes patents related to paper recycling issued during the last 6 months of 1998. The two online databases used for this search are Claim/US. Patents Abstracts and Derwent World Patents Index. This semiannual feature is intended to inform readers about the latest developments in equipment, chemicals, and technology in the field of paper recycling. This...

  2. 77 FR 8072 - Semiannual Regulatory Flexibility Agenda

    Science.gov (United States)

    2012-02-13

    .... II Semiannual Regulatory Flexibility Agenda AGENCY: Board of Governors of the Federal Reserve System... Flexibility Act and the Board's Statement of Policy Regarding Expanded Rulemaking Procedures. The Board... Regulatory Flexibility Act, and public comment is invited on those entries. The complete Unified Agenda will...

  3. Environmental Protection Agency Semiannual Regulatory Agenda

    Science.gov (United States)

    2010-12-20

    ... with the States and Tribes, business and industry, nonprofit organizations, environmental groups, and... Environmental Protection Agency Semiannual Regulatory Agenda ] ENVIRONMENTAL PROTECTION AGENCY (EPA) ENVIRONMENTAL PROTECTION AGENCY 40 CFR Ch. I EPA-HQ-OA-2007-1172 EPA-HQ-OW-2010-0169 EPA-HQ-OW-2010-0166 EPA-HQ...

  4. Systems Modelling of the Socio-Technical Aspects of Residential Electricity Use and Network Peak Demand.

    Directory of Open Access Journals (Sweden)

    Jim Lewis

    Full Text Available Provision of network infrastructure to meet rising network peak demand is increasing the cost of electricity. Addressing this demand is a major imperative for Australian electricity agencies. The network peak demand model reported in this paper provides a quantified decision support tool and a means of understanding the key influences and impacts on network peak demand. An investigation of the system factors impacting residential consumers' peak demand for electricity was undertaken in Queensland, Australia. Technical factors, such as the customers' location, housing construction and appliances, were combined with social factors, such as household demographics, culture, trust and knowledge, and Change Management Options (CMOs such as tariffs, price, managed supply, etc., in a conceptual 'map' of the system. A Bayesian network was used to quantify the model and provide insights into the major influential factors and their interactions. The model was also used to examine the reduction in network peak demand with different market-based and government interventions in various customer locations of interest and investigate the relative importance of instituting programs that build trust and knowledge through well designed customer-industry engagement activities. The Bayesian network was implemented via a spreadsheet with a tickbox interface. The model combined available data from industry-specific and public sources with relevant expert opinion. The results revealed that the most effective intervention strategies involve combining particular CMOs with associated education and engagement activities. The model demonstrated the importance of designing interventions that take into account the interactions of the various elements of the socio-technical system. The options that provided the greatest impact on peak demand were Off-Peak Tariffs and Managed Supply and increases in the price of electricity. The impact in peak demand reduction differed for each

  5. Systems Modelling of the Socio-Technical Aspects of Residential Electricity Use and Network Peak Demand.

    Science.gov (United States)

    Lewis, Jim; Mengersen, Kerrie; Buys, Laurie; Vine, Desley; Bell, John; Morris, Peter; Ledwich, Gerard

    2015-01-01

    Provision of network infrastructure to meet rising network peak demand is increasing the cost of electricity. Addressing this demand is a major imperative for Australian electricity agencies. The network peak demand model reported in this paper provides a quantified decision support tool and a means of understanding the key influences and impacts on network peak demand. An investigation of the system factors impacting residential consumers' peak demand for electricity was undertaken in Queensland, Australia. Technical factors, such as the customers' location, housing construction and appliances, were combined with social factors, such as household demographics, culture, trust and knowledge, and Change Management Options (CMOs) such as tariffs, price, managed supply, etc., in a conceptual 'map' of the system. A Bayesian network was used to quantify the model and provide insights into the major influential factors and their interactions. The model was also used to examine the reduction in network peak demand with different market-based and government interventions in various customer locations of interest and investigate the relative importance of instituting programs that build trust and knowledge through well designed customer-industry engagement activities. The Bayesian network was implemented via a spreadsheet with a tickbox interface. The model combined available data from industry-specific and public sources with relevant expert opinion. The results revealed that the most effective intervention strategies involve combining particular CMOs with associated education and engagement activities. The model demonstrated the importance of designing interventions that take into account the interactions of the various elements of the socio-technical system. The options that provided the greatest impact on peak demand were Off-Peak Tariffs and Managed Supply and increases in the price of electricity. The impact in peak demand reduction differed for each of the locations

  6. Robust detection and verification of linear relationships to generate metabolic networks using estimates of technical errors

    Directory of Open Access Journals (Sweden)

    Holschneider Matthias

    2007-05-01

    Full Text Available Abstract Background The size and magnitude of the metabolome, the ratio between individual metabolites and the response of metabolic networks is controlled by multiple cellular factors. A tight control over metabolite ratios will be reflected by a linear relationship of pairs of metabolite due to the flexibility of metabolic pathways. Hence, unbiased detection and validation of linear metabolic variance can be interpreted in terms of biological control. For robust analyses, criteria for rejecting or accepting linearities need to be developed despite technical measurement errors. The entirety of all pair wise linear metabolic relationships then yields insights into the network of cellular regulation. Results The Bayesian law was applied for detecting linearities that are validated by explaining the residues by the degree of technical measurement errors. Test statistics were developed and the algorithm was tested on simulated data using 3–150 samples and 0–100% technical error. Under the null hypothesis of the existence of a linear relationship, type I errors remained below 5% for data sets consisting of more than four samples, whereas the type II error rate quickly raised with increasing technical errors. Conversely, a filter was developed to balance the error rates in the opposite direction. A minimum of 20 biological replicates is recommended if technical errors remain below 20% relative standard deviation and if thresholds for false error rates are acceptable at less than 5%. The algorithm was proven to be robust against outliers, unlike Pearson's correlations. Conclusion The algorithm facilitates finding linear relationships in complex datasets, which is radically different from estimating linearity parameters from given linear relationships. Without filter, it provides high sensitivity and fair specificity. If the filter is activated, high specificity but only fair sensitivity is yielded. Total error rates are more favorable with

  7. Outreach and Technical Assistance Network. Third Year Evaluation Report. February 1, 1992-January 31, 1993. An Adult Education 2000 Project.

    Science.gov (United States)

    Hacienda La Puente Unified School District, City of Industry, CA. Outreach and Technical Assistance Network.

    The Outreach and Technical Assistance Network (OTAN) was developed to disseminate resources to California adult educators. During the project's third year, staff development and information services were provided to 321 funded agencies. In collaboration with the Educational Telecommunications Network, OTAN staff organized the Adult Learning…

  8. Use Of Bayesian Networks And Augmented Reality To Reliability Testing Of Complex Technical Objects

    Directory of Open Access Journals (Sweden)

    Wójcicki Tomasz

    2015-11-01

    Full Text Available This paper presents a methodology developed to support the tests of reliability of complex technical objects. The presented methodology covers the use of modern information technologies in the form of algorithmic models and effective visualization techniques in the form of augmented reality. The possibility of using a probabilistic Bayesian network. The method of determining the probabilities for specific nodes, and the total probability distribution of graph structures are presented. The structure of the model and its basic functions are shown. The results of the verification work for connecting data processing methods and visualization techniques based on augmented reality are presented.

  9. Technical guide to the connection of generation to the distribution network

    Energy Technology Data Exchange (ETDEWEB)

    Jarrett, K.; Hedgecock, J.; Gregory, R.; Warham, T.

    2003-07-01

    This guide provides a 'route map' of the processes of getting a generation scheme connected to the network and is intended to help developers of any form of distributed generation connected to the UK's local electricity networks, eg: renewable energy schemes; waste-to-energy schemes; on-site generation and combined heat and power (CHP) schemes; and peak lopping schemes using back-up generators. Where necessary, the guide distinguishes between arrangements that apply in Scotland and those that apply in England and Wales. The guide aims to: provide background information about the electricity industry; highlight common technical issues that arise during connection negotiation and their implications for distribution network operators (DNOs) and developers; examine the main factors affecting connection costs and timescales for achieving connections; and identify the different types of contracts relating to connection. The report considers the connection process, the connection application process and timescales, costs and charges, competition in connection, the structure of the UK electricity industry, the statutory framework, the effects of distributed generation of the distribution system, earthing and protection design, safety issues and DNO network information. It includes a glossary, checklists, useful contact details and information about standards and other useful documents.

  10. 22 CFR 311.600 - Semi-annual compilation.

    Science.gov (United States)

    2010-04-01

    ... Senate and the Committee on Foreign Affairs of the House of Representatives or the Committees on Armed... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Semi-annual compilation. 311.600 Section 311.600 Foreign Relations PEACE CORPS NEW RESTRICTIONS ON LOBBYING Agency Reports § 311.600 Semi-annual...

  11. Fusion Materials Semiannual Progress Report for the Period Ending June 30, 1999

    Energy Technology Data Exchange (ETDEWEB)

    Rowcliffe, A.F.

    1999-09-01

    This is the twenty-sixth in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components. This effort forms one element of the materials program being conducted in support of the Fusion Energy Sciences Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and its reported separately.

  12. Fusion Materials Semiannual Progress Report for Period Ending December 31, 1998

    Energy Technology Data Exchange (ETDEWEB)

    Rowcliff, A.F.; Burn, G.

    1999-04-01

    This is the twenty-fifth in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components. This effort forms one element of the materials program being conducted in support of the Fusion Energy Sciences Program of the U.S. Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately.

  13. Fusion reactor materials semiannual progress report for the period ending March 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-01

    This is the fourteenth in a series of semiannual technical progress reports on fusion reactor materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the US Depart of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. Separate abstracts were prepared for each individual section.

  14. Fusion reactor materials: Semiannual progress report for the period ending March 31, 1987

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1987-09-01

    This is the second in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities in the following areas: (1) Alloy Development for Irradiation Performance; (2) Damage Analysis and Fundamental Studies; and (3) Special Purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials program being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. Separate analytics were prepared for the reports in this volume.

  15. Fusion materials semiannual progress report for the period ending June 30, 1998

    Energy Technology Data Exchange (ETDEWEB)

    Burn, G. [ed.] [comp.

    1998-09-01

    This is the twenty-fourth in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components. This effort forms one element of the materials program being conducted in support of the Fusion Energy Sciences Program of the US Department of Energy. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  16. A Technical and Business Perspective on Wireless Sensor Network for Manufacturing Execution System

    Directory of Open Access Journals (Sweden)

    Wei Xu

    2015-01-01

    Full Text Available Motivated by the complex production management with difficulties in error-prone assembly system and inaccurate supply chain inventory, this paper designs a novel manufacturing execution system (MES architecture for intelligent monitoring based on wireless sensor network (WSN. The technical perspective includes analysis on the proposed manufacturing resource mutual inductance method under active sensing network, appreciation technology of multisource information, and dynamic optimization technology for manufacturing execution processes. From business perspective, this paper elaborates the impact of RFID investment on complex product by establishing a three-stage supply chain model that involves two suppliers carrying out Stackelberg games (manufacturer and retailer. The optimal cost threshold values of technology investment are examined for both the centralized and the decentralized scenarios utilizing quantitative modeling methods. By analyzing and comparing the optimal profit with or without investment on WSN, this paper establishes a supply chain coordination and boosting model. The results of this paper have contributed significantly for one to make decision on whether RFID should be adopted among its members in supply chain. The system performance and model extension are verified via numerical analyses.

  17. Semiannual Technical Summary, 1 October 1997-31 March 1998

    Science.gov (United States)

    1998-05-01

    Hagfors array in Sweden and the regional seismic array in Apatity , Russia. (cont.) 20. DISTRIBUTION /AVAILABILITY OF ABSTRACT D UNCLASSIFIED/UNLIMITED...have been conducted throughout the period. Data from two small-aperture arrays at sites in Spitsbergen and Apatity , Kola Penin- sula, as well as the...seismic array in Apatity , Russia. The NORSAR Detection Processing system has been operated throughout the period with an average uptime of 99.77%. A

  18. Semiannual Technical Summary, 1 April - 30 September 1989

    Science.gov (United States)

    1989-12-01

    and concluded that reliable Lg measurements at these stations would be possible for explosions as small as mt = 4.0, assuming normal noise conditions...local time to EPOC -time and conversion from local coordinates provided by the Norwegian Mapping Authority (NGO) to geodetic latitude and longitude

  19. Technology for satellite power conversion. Semiannual technical report

    Energy Technology Data Exchange (ETDEWEB)

    Gouker, M.A.; Campbell, D.P.; Gallagher, J.J.

    1987-02-01

    The work is this reporting period was concentrated on electronically calibrating the bolometer detectors. The calibration is necessary for two reasons: first, the power delivered to the rectifying circuit must be known in order to choose a diode with the appropriate barrier height, and second, the power captured by the antenna must be measured if the efficiency of the rectenna is to be divided into antenna efficiency and rectification efficiency. The millimeter wave region operation of the bolometers was simulated with a VHF (10 to 90 MHz) test signal. These detectors are accurate to within roughly 10%. The typical responsivity of the bolometers is 10 volts/watt and the NEP at 20 Hz is 5 times 10 to the minus 9th power W(Hz)-1/2.

  20. Outreach and Technical Assistance Network. Four Year Evaluation Report December 1, 1989-January 31, 1994. An Education 2000 Project.

    Science.gov (United States)

    Hacienda La Puente Unified School District, City of Industry, CA. Outreach and Technical Assistance Network.

    The Outreach and Technical Assistance Network (OTAN) has made a significant contribution to meeting the needs of California adult educators. During 4 years of operation, OTAN has organized and implemented a wide range of communication linkages, information and training resources, nationally recognized electronic communication systems,…

  1. Automatic landing system using neural networks and radio-technical subsystems

    Directory of Open Access Journals (Sweden)

    Romulus Lungu

    2017-02-01

    Full Text Available The paper focuses on the design of a new automatic landing system (ALS in longitudinal plane; the new ALS controls the aircraft trajectory and longitudinal velocity. Aircraft control is achieved by means of a proportional-integral (PI controller and the instrumental landing system – the first phase of landing (the glide slope and a proportional-integral-derivative (PID controller together with a radio-altimeter – the second phase of landing (the flare; both controllers modify the reference model associated with aircraft pitch angle. The control of the pitch angle and longitudinal velocity is performed by a neural network adaptive control system, based on the dynamic inversion concept, having the following as components: a linear dynamic compensator, a linear observer, reference models, and a Pseudo control hedging (PCH block. The theoretical results are software implemented and validated by complex numerical simulations; compared with other ALSs having the same radio-technical subsystems but with conventional or fuzzy controllers for the control of aircraft pitch angle and longitudinal velocity, the architecture designed in this paper is characterized by much smaller overshoots and stationary errors.

  2. Fusion reactor materials. Semiannual progress report for period ending September 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Rowcliffe, A.F.; Burn, G.L.; Knee`, S.S.; Dowker, C.L. [comps.

    1994-02-01

    This is the fifteenth in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following progress reports: Alloy Development for Irradiation Performance; Damage Analysis and Fundamental Studies; Special purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the U.S. Department of Energy. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide.

  3. 31 CFR 359.11 - What is the semiannual inflation rate?

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false What is the semiannual inflation rate... BONDS, SERIES I General Information § 359.11 What is the semiannual inflation rate? The index used to determine the semiannual inflation rate is the non-seasonally adjusted CPI-U (the Consumer Price Index for...

  4. Technical and commercial aspects of the connection of wind turbines to electricity supply networks in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Gardner, P. [Garrad Hassan & Partners Ltd., Glasgow (United Kingdom)

    1996-12-31

    This paper reviews some technical and commercial issues now topical for wind energy developments in Europe. The technical issues are important because of the weak nature of the existing electricity systems in rural or upland areas. Several commercial issues are considered which may improve the economics of wind energy as market incentives are gradually withdrawn. 9 refs.

  5. Technical troubles encountered in the seismic observation network of Pacific21

    National Research Council Canada - National Science Library

    Yuki, Yoshiki; Ishihara, Yasushi

    2009-01-01

    Real-time monitoring of broadband seismographs through the Internet enables us to discover various technical troubles of broadband seismic observation system of Pacific21 and to take measures to solve...

  6. Unattended network operations technology assessment study. Technical support for defining advanced satellite systems concepts

    Science.gov (United States)

    Price, Kent M.; Holdridge, Mark; Odubiyi, Jide; Jaworski, Allan; Morgan, Herbert K.

    1991-01-01

    The results are summarized of an unattended network operations technology assessment study for the Space Exploration Initiative (SEI). The scope of the work included: (1) identified possible enhancements due to the proposed Mars communications network; (2) identified network operations on Mars; (3) performed a technology assessment of possible supporting technologies based on current and future approaches to network operations; and (4) developed a plan for the testing and development of these technologies. The most important results obtained are as follows: (1) addition of a third Mars Relay Satellite (MRS) and MRS cross link capabilities will enhance the network's fault tolerance capabilities through improved connectivity; (2) network functions can be divided into the six basic ISO network functional groups; (3) distributed artificial intelligence technologies will augment more traditional network management technologies to form the technological infrastructure of a virtually unattended network; and (4) a great effort is required to bring the current network technology levels for manned space communications up to the level needed for an automated fault tolerance Mars communications network.

  7. An online practice and educational networking system for technical skills: learning experience in expert facilitated vs. independent learning communities.

    Science.gov (United States)

    Rojas, David; Cheung, Jeffrey J H; Weber, Bryce; Kapralos, Bill; Carnahan, Heather; Bägli, Darius J; Dubrowski, Adam

    2012-01-01

    This study explored the activities of trainees learning technical skills using an educational networking tool with and without expert facilitation. Medical students (participants) were video-recorded practicing suturing and knot tying techniques and the resulting videos were uploaded to an educational networking site. Participants were then divided into two groups (one group containing an expert facilitator while the other group did not) and encouraged to comment on the videos within their group. We monitored the number of logins and comments posted and all participants completed an exit survey. There were no differences between the activities the two groups (p = 0.387). We conclude that the presence of an expert within collaborative Internet environments in not necessary to promote interactivity amongst the learners.

  8. Application of neural networks for the calculation of technical losses of electric energy in air power lines 6-35 kV

    OpenAIRE

    Володимир Леонідович Бакулевський

    2015-01-01

    A model for the calculation of technical losses of electricity in the air lines with voltage of 6-35 kV based on neural networks with due regard to meteorological factors has been worked out; the main components of the model have been considered and researched; the best ones being selected, that is: a set of input variables, volume of excerpts (training, control and testing), architecture and network activation function, network learning algorithm was proposed. Simulation was conducted in OS ...

  9. Visually Augmented Analysis of Socio-Technical Networks in Engineering Systems Design Research

    DEFF Research Database (Denmark)

    Storga, M.; Stankovic, T.; Cash, Philip

    2013-01-01

    , but only fairly recently has the study of networks in general become a major topic of research in complex engineering systems. The research reported in this paper is discussing how the visually augmented analysis of complex socio-networks (networks of people and technology engaged in a product/service-system...... captured during experiments and observations that are more and more used as a main research method. Case studies that are presented illustrate also the significance of the network based research approach in providing insight into ways of improving the design process for complex engineering systems.......In characterizing systems behaviour, complex-systems scientists use tools from a variety of disciplines, including nonlinear dynamics, information theory, computation theory, evolutionary biology and social network analysis, among others. All of these topics have been studied for some time...

  10. ONE-DIMENSIONAL HYDRODYNAMIC/SEDIMENT TRANSPORT MODEL FOR STREAM NETWORKS: TECHNICAL REPORT

    Science.gov (United States)

    This technical report describes a new sediment transport model and the supporting post-processor, and sampling procedures for sediments in streams. Specifically, the following items are described herein: EFDC1D - This is a new one-dimensional hydrodynamic and sediment tr...

  11. Semiannual Report: Oct 1, 1997 - Mar 31, 1998

    Science.gov (United States)

    Semiannual Report #EPA-350-R-98-001, May, 1998. As evidenced by the success of our efforts in these and other areas, the Office of Inspector General remains committed to assisting the Agency in the accomplishment of its environmental goals.

  12. Semiannual Report: Apr 1, 1998 - Sept 30, 1998

    Science.gov (United States)

    Semiannual Report #EPA-350-R-98-004, Nov, 1998. We look forward to working with the Administrator, Agency managers, Congress, and EPA's various stakeholders to help ensure that EPA delivers the maximum in environmental and health benefits to the public.

  13. 15 CFR 28.600 - Semi-annual compilation.

    Science.gov (United States)

    2010-01-01

    ... the Committee on Foreign Relations of the Senate and the Committee on Foreign Affairs of the House of... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Semi-annual compilation. 28.600 Section 28.600 Commerce and Foreign Trade Office of the Secretary of Commerce NEW RESTRICTIONS ON LOBBYING...

  14. 22 CFR 138.600 - Semi-annual compilation.

    Science.gov (United States)

    2010-04-01

    ... Relations of the Senate and the Committee on Foreign Affairs of the House of Representatives or the... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Semi-annual compilation. 138.600 Section 138.600 Foreign Relations DEPARTMENT OF STATE MISCELLANEOUS NEW RESTRICTIONS ON LOBBYING Agency Reports...

  15. 22 CFR 712.600 - Semi-annual compilation.

    Science.gov (United States)

    2010-04-01

    ... the Committee on Foreign Relations of the Senate and the Committee on Foreign Affairs of the House of... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Semi-annual compilation. 712.600 Section 712.600 Foreign Relations OVERSEAS PRIVATE INVESTMENT CORPORATION ADMINISTRATIVE PROVISIONS NEW RESTRICTIONS ON...

  16. 22 CFR 227.600 - Semi-annual compilation.

    Science.gov (United States)

    2010-04-01

    ... Relations of the Senate and the Committee on Foreign Affairs of the House of Representatives or the... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Semi-annual compilation. 227.600 Section 227.600 Foreign Relations AGENCY FOR INTERNATIONAL DEVELOPMENT NEW RESTRICTIONS ON LOBBYING Agency Reports...

  17. 22 CFR 519.600 - Semi-annual compilation.

    Science.gov (United States)

    2010-04-01

    ... Relations of the Senate and the Committee on Foreign Affairs of the House of Representatives or the... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Semi-annual compilation. 519.600 Section 519.600 Foreign Relations BROADCASTING BOARD OF GOVERNORS NEW RESTRICTIONS ON LOBBYING Agency Reports § 519.600...

  18. 13 CFR 146.600 - Semi-annual compilation.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Semi-annual compilation. 146.600 Section 146.600 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION NEW RESTRICTIONS ON LOBBYING.... (c) Information that involves intelligence matters shall be reported only to the Select Committee on...

  19. Report: Results of Technical Network Vulnerability Assessment: EPA’s Research Triangle Park Finance Center

    Science.gov (United States)

    Report #09-P-0227, August 31, 2009. Vulnerability testing conducted in April 2009 of EPA’s Research Triangle Park Finance Center network identified Internet Protocol addresses with several highrisk vulnerabilities.

  20. Fusion reactor materials: Semiannual progress report for period ending September 30, 1987

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1988-03-01

    This is the third in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following technical progress reports: Alloy Development for Irradiation Performances; Damage Analysis and Fundamental Studies; Special Purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials program being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide.

  1. Fusion reactor materials semiannual progress report for the period ending September 30, 1989

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1989-01-01

    This is the seventh in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following technical progress reports: alloy development for irradiation performance, damage analysis and fundamental studies, and special purpose materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials program being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide.

  2. Fusion materials semiannual progress report for the period ending March 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    This is the eighteenth in a series of semiannual technical progress reports on fusion materials. This report combines research and development activities which were previously reported separately in the following progress reports: {sm_bullet} Alloy Development for Irradiation Performance. {sm_bullet} Damage Analysis and Fundamental Studies. {sm_bullet} Special Purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide. This report has been compiled and edited under the guidance of A.F. Rowcliffe by Gabrielle Burn, Oak Ridge National Laboratory. Their efforts, and the efforts of the many persons who made technical contributions, are gratefully acknowledged.

  3. Fusion reactor materials semiannual progress report for period ending September 30, 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-04-01

    This is the ninth in series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following technical progress reports: Alloy Development of Irradiation Performance; Damage Analysis and Fundamental Studies; and Special Purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials program being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide.

  4. Massively parallel network architectures for automatic recognition of visual speech signals. Final technical report

    Energy Technology Data Exchange (ETDEWEB)

    Sejnowski, T.J.; Goldstein, M.

    1990-01-01

    This research sought to produce a massively-parallel network architecture that could interpret speech signals from video recordings of human talkers. This report summarizes the project's results: (1) A corpus of video recordings from two human speakers was analyzed with image processing techniques and used as the data for this study; (2) We demonstrated that a feed forward network could be trained to categorize vowels from these talkers. The performance was comparable to that of the nearest neighbors techniques and to trained humans on the same data; (3) We developed a novel approach to sensory fusion by training a network to transform from facial images to short-time spectral amplitude envelopes. This information can be used to increase the signal-to-noise ratio and hence the performance of acoustic speech recognition systems in noisy environments; (4) We explored the use of recurrent networks to perform the same mapping for continuous speech. Results of this project demonstrate the feasibility of adding a visual speech recognition component to enhance existing speech recognition systems. Such a combined system could be used in noisy environments, such as cockpits, where improved communication is needed. This demonstration of presymbolic fusion of visual and acoustic speech signals is consistent with our current understanding of human speech perception.

  5. Transition and transformation : A bibliometric analysis of two scientific networks researching socio-technical change

    NARCIS (Netherlands)

    Chappin, E.J.L.; Ligtvoet, A.

    2013-01-01

    Sustainability policy in the early 2000s is based on and therefore influenced by scientific literature on ‘transition’. The importance of this link has inspired the authors to explore the structure of cooperating authors and citation networks in the field. In order to understand ‘transition’

  6. Proposal for the award of a contract for the supply of Enterasys smartswitch routers for the technical and accelerator networks

    CERN Document Server

    2002-01-01

    This document concerns the award of a contract for the supply of Enterasys smartswitch routers for the technical and accelerator networks. Following a call for tenders (IT-3030/IT) sent on 14 December 2001 to 15 firms in eight Member States, CERN had received, by the closing date, five tenders from five firms in three Member States. The Finance Committee is invited to agree to the negotiation of a contract with SCOTLAND ELECTRONICS (GB), the lowest bidder, for the supply of Enterasys Smartswitch routers for a total amount of 1 281 050 US Dollars (2 162 411 Swiss francs), not subject to revision. The firm has indicated the following distribution by country of the contract value covered by this adjudication proposal: IE - 100%.

  7. Technology Infusion of CodeSonar into the Space Network Ground Segment (RII07): Software Assurance Symposium Technical Summary

    Science.gov (United States)

    Benson, Markland J.

    2008-01-01

    Presents a source code analysis tool (CodeSonar) for use in the Space Network Ground Segment. The Space Network requires 99.9% proficiency and 97.0% availability of systems. Software has historically accounted for an annual average of 28% of the Space Network loss of availability and proficiency. CSCI A and CSCI B account for 42% of the previous eight months of software data loss. The technology infusion of CodeSonar into the Space Network Ground segment is meant to aid in determining the impact of the technology on the project both in the expenditure of effort and the technical results of the technology. Running a CodeSonar analysis and performing a preliminary review of the results averaged 3.5 minutes per finding (approximately 20 hours total). An additional 40 hours is estimated to analyze the 37 findings deemed too complex for the initial review. Using CodeSonar's tools to suppress known non-problems, delta tool runs will not repeat findings that have been marked as non-problems, further reducing the time needed for review. The 'non-interesting' finding rate of 70% is a large number, but filtering, search, and detailed contextual features of CodeSonar reduce the time per finding. Integration of the tool into the build process may also provide further savings by preventing developers from having to configure and operate the tool separately. These preliminary results show the tool to be easy to use and incorporate into the engineering process. These findings also provide significant potential improvements in proficiency and availability on the part of the software. As time-to-fix data become available a better cost trade can be made on person hours saved versus tool cost. Selective factors may be necessary to determine where best to apply CodeSonar to balance cost and benefits.

  8. Distributed sensor networks

    Science.gov (United States)

    Lacoss, R. T.

    1985-09-01

    The Distributed Sensor Networks (DSN) program is aimed at developing and extending target surveillance and tracking technology in systems that employ multiple spatially distributed sensors and processing resources. Such a system would be made up of sensors, data bases, and processors distributed throughout an area and interconnected by an appropriate digital data communication system. The detection, tracking, and classification of low flying aircraft has been selected to develop and evaluate DSN concepts in the light of a specific system problem. A DSN test bed has been developed and is being used to test and demonstrate DSN techniques and technology. The overall concept calls for a mix of sensor types. The initial test-bed sensors are small arrays of microphones at each node augmented by TV sensors at some nodes. This Semiannual Technical Summary (SATS) reports results for the period 1 October 1984 through 31 March 1985. Progress in the development of distributed tracking algorithms and their implementation in the DSN test-bed system is reviewed in Section II. Test-bed versions of distributed acoustic tracking algorithms now have been implemented and tested using simulated acoustic data. This required developing a solution to a basic distributed tracking problem: the information feedback problem. Target tracks received by one node from another node often implicitly include information that originally was obtained from the receiving node.

  9. Technical Note: Novel method for water vapour monitoring using wireless communication networks measurements

    Directory of Open Access Journals (Sweden)

    N. David

    2009-04-01

    Full Text Available We propose a new technique that overcomes the obstacles of the existing methods for monitoring near-surface water vapour, by estimating humidity from data collected through existing wireless communication networks.

    Weather conditions and atmospheric phenomena affect the electromagnetic channel, causing attenuations to the radio signals. Thus, wireless communication networks are in effect built-in environmental monitoring facilities. The wireless microwave links, used in these networks, are widely deployed by cellular providers for backhaul communication between base stations, a few tens of meters above ground level. As a result, if all available measurements are used, the proposed method can provide moisture observations with high spatial resolution and potentially high temporal resolution. Further, the implementation cost is minimal, since the data used are already collected and saved by the cellular operators. In addition – many of these links are installed in areas where access is difficult such as orographic terrain and complex topography. As such, our method enables measurements in places that have been hard to measure in the past, or have never been measured before. The technique is restricted to weather conditions which exclude rain, fog or clouds along the propagation path. Strong winds that may cause movement of the link transmitter or receiver (or both may also interfere with the ability to conduct accurate measurements.

    We present results from real-data measurements taken from two microwave links used in a backhaul cellular network that show convincing correlation to surface station humidity measurements. The measurements were taken daily in two sites, one in northern Israel (28 measurements, the other in central Israel (29 measurements. The correlation between the microwave link measurements and the humidity gauges were 0.9 and 0.82 for the north and central sites, respectively. The Root Mean Square Differences

  10. The Technical Problems of Anti-theft Diagnostics in a Traction Network

    Science.gov (United States)

    Mikulski, Jerzy; Młynczak, Jakub

    2012-02-01

    The paper presents an analysis of traction lines theft in the Katowice division of the Railroad Development Company (Zakład Linii Kolejowych - ZLK) as well as the principles for the anti-theft protection system, currently in development. The problem of theft is a very important issue concerning the safety of rail transportation. It is also a significant economic problem, as the cost of recreating a stolen network is very high. Moreover, the Administrator of the infrastructure bears the cost of compensation for any delays in train schedules.

  11. Technical Note: Quantitative dynamic contrast-enhanced MRI of a 3-dimensional artificial capillary network.

    Science.gov (United States)

    Gaass, Thomas; Schneider, Moritz Jörg; Dietrich, Olaf; Ingrisch, Michael; Dinkel, Julien

    2017-04-01

    Variability across devices, patients, and time still hinders widespread recognition of dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) as quantitative biomarker. The purpose of this work was to introduce and characterize a dedicated microchannel phantom as a model for quantitative DCE-MRI measurements. A perfusable, MR-compatible microchannel network was constructed on the basis of sacrificial melt-spun sugar fibers embedded in a block of epoxy resin. Structural analysis was performed on the basis of light microscopy images before DCE-MRI experiments. During dynamic acquisition the capillary network was perfused with a standard contrast agent injection system. Flow-dependency, as well as inter- and intrascanner reproducibility of the computed DCE parameters were evaluated using a 3.0 T whole-body MRI. Semi-quantitative and quantitative flow-related parameters exhibited the expected proportionality to the set flow rate (mean Pearson correlation coefficient: 0.991, P quantitative parameters. All evaluated parameters were well in the range of known in vivo results for the applied flow rates. The constructed phantom enables reproducible, flow-dependent, contrast-enhanced MR measurements with the potential to facilitate standardization and comparability of DCE-MRI examinations. © 2017 American Association of Physicists in Medicine.

  12. Fusion reactor materials semiannual progress report for the period ending March 31, 1991

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1991-07-01

    This is the tenth in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following progress reports: alloy development for irradiation performance; damage analysis and fundamental studies; special purpose materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials program being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of program participants, and to provide a means of communicating the efforts of materials scientists to the test of the fusion community, both nationally and worldwide.

  13. Fusion Reactor Materials semiannual progress report for the period ending March 31, 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-07-01

    This is the twelfth in a series of semiannual technical progress reports on fusion reactor materials. This report combines research and development activities which were previously reported separately in the following progress reports: Alloy Development for Irradiation Performance; Damage Analysis and Fundamental Studies; and Special Purpose Materials. These activities are concerned principally with the effects of the neutronic and chemical environment on the properties and performance of reactor materials; together they form one element of the overall materials programs being conducted in support of the Magnetic Fusion Energy Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Reactor Materials Program is a national effort involving several national laboratories, universities, and industries. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide.

  14. Fusion materials semiannual progress report for the period ending December 31, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Burn, G. [ed.] [comp.

    1998-03-01

    This is the twenty-third in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components. This effort forms one element of the materials program being conducted in support of the Fusion Energy Sciences Program of the US Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately. The Fusion Materials Program is a national effort involving several national laboratories, universities, and industries. A large fraction of this work, particularly in relation to fission reactor experiments, is carried out collaboratively with their partners in Japan, Russia, and the European Union. The purpose of this series of reports is to provide a working technical record for the use of the program participants, and to provide a means of communicating the efforts of materials scientists to the rest of the fusion community, both nationally and worldwide. Selected papers have been indexed separately for inclusion in the Energy Science and Technology Database.

  15. Technical note: An R package for fitting Bayesian regularized neural networks with applications in animal breeding.

    Science.gov (United States)

    Pérez-Rodríguez, P; Gianola, D; Weigel, K A; Rosa, G J M; Crossa, J

    2013-08-01

    In recent years, several statistical models have been developed for predicting genetic values for complex traits using information on dense molecular markers, pedigrees, or both. These models include, among others, the Bayesian regularized neural networks (BRNN) that have been widely used in prediction problems in other fields of application and, more recently, for genome-enabled prediction. The R package described here (brnn) implements BRNN models and extends these to include both additive and dominance effects. The implementation takes advantage of multicore architectures via a parallel computing approach using openMP (Open Multiprocessing) for the computations. This note briefly describes the classes of models that can be fitted using the brnn package, and it also illustrates its use through several real examples.

  16. Use of neural networks in the capacitance imaging system. Technical note

    Energy Technology Data Exchange (ETDEWEB)

    Fasching, G.E.; Loudin, W.J.; Paton, D.E.; Smith, N.S. Jr.

    1993-10-01

    The US Department of Energy`s Morgantown Energy Technology Center (METC) has developed a capacitance imaging system (CIS) to support its fluidized-bed research programs. The CIS uses 400 electric displacement current measurements taken between combinations of pairs of 32 electrodes to obtain a measure of the fluidized-bed material density in the volume between the electrodes. The measurements are simultaneously made for three other sets of horizontally-oriented 32 electrodes with the four sets evenly spaced vertically. This report describes the development of a method of using the 400 current measurements per level as the input to a neural network to produce the 193-pixel density estimates defined for each level. A 417-neuron subnetwork using 4,047 weights is defined as the system used to determine a set of 32-pixel densities in one of the annular regions of the fluidized-bed cross section. The same subnetwork with different values of weights is used for the other five annular regions that cover the rest of the cross section. An averaging technique is used to determine the density of the small central region. The methods used to optimize the set of weights for each of the six subnetworks are described. The results of tests using calibration electric current data as inputs to the neural system showed that these density estimates have less error than three previously developed methods of converting current measurements into pixel density maps. A comparison of the density maps produced by the neural system and the alternate three methods using input fluidization data also indicates the superior performance of the neural network approach.

  17. Twenty-first Semiannual Report of the Commission to the Congress, January 1957

    Energy Technology Data Exchange (ETDEWEB)

    Strauss, Lewis L.

    1957-01-31

    The document represents the twenty-first semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program covering the period July - December 1956. A special part two of this semiannual report addresses specifically Radiation Safety in Atomic Energy Activities.

  18. 76 FR 54829 - The First Semi-Annual Aviation Workforce Management Conference

    Science.gov (United States)

    2011-09-02

    ... aviation workforce and its management, with the ultimate goal of a healthier industry for all.'' A copy of... Office of the Secretary of Transportation The First Semi-Annual Aviation Workforce Management Conference... Transportation, announces the First Semi-Annual Aviation Workforce Management Conference which will be held in...

  19. FINAL TECHNICAL REPORT: Underwater Active Acoustic Monitoring Network For Marine And Hydrokinetic Energy Projects

    Energy Technology Data Exchange (ETDEWEB)

    Stein, Peter J. [Scientific Solutions, Inc, Nashua, NH (United States); Edson, Patrick L. [Scientific Solutions, Inc, Nashua, NH (United States)

    2013-12-20

    This project saw the completion of the design and development of a second generation, high frequency (90-120 kHz) Subsurface-Threat Detection Sonar Network (SDSN). The system was deployed, operated, and tested in Cobscook Bay, Maine near the site the Ocean Renewable Power Company TidGen™ power unit. This effort resulted in a very successful demonstration of the SDSN detection, tracking, localization, and classification capabilities in a high current, MHK environment as measured by results from the detection and tracking trials in Cobscook Bay. The new high frequency node, designed to operate outside the hearing range of a subset of marine mammals, was shown to detect and track objects of marine mammal-like target strength to ranges of approximately 500 meters. This performance range results in the SDSN system tracking objects for a significant duration - on the order of minutes - even in a tidal flow of 5-7 knots, potentially allowing time for MHK system or operator decision-making if marine mammals are present. Having demonstrated detection and tracking of synthetic targets with target strengths similar to some marine mammals, the primary hurdle to eventual automated monitoring is a dataset of actual marine mammal kinematic behavior and modifying the tracking algorithms and parameters which are currently tuned to human diver kinematics and classification.

  20. Grower networks support adoption of innovations in pollination management: The roles of social learning, technical learning, and personal experience.

    Science.gov (United States)

    Garbach, Kelly; Morgan, Geoffrey P

    2017-12-15

    Management decisions underpinning availability of ecosystem services and the organisms that provide them in agroecosystems, such as pollinators and pollination services, have emerged as a foremost consideration for both conservation and crop production goals. There is growing evidence that innovative management practices can support diverse pollinators and increase crop pollination. However, there is also considerable debate regarding factors that support adoption of these innovative practices. This study investigated pollination management practices and related knowledge systems in a major crop producing region of southwest Michigan in the United States, where 367 growers were surveyed to evaluate adoption of three innovative practices that are at various stages of adoption. The goals of this quantitative, social survey were to investigate grower experience with concerns and benefits associated with each practice, as well as the influence of grower networks, which are comprised of contacts that reflect potential pathways for social and technical learning. The results demonstrated that 17% of growers adopted combinations of bees (e.g. honey bees, Apis mellifera, with other species), representing an innovation in use by early adopters; 49% of growers adopted flowering cover crops, an innovation in use by the early majority 55% of growers retained permanent habitat for pollinators, an innovation in use by the late majority. Not all growers adopted innovative practices. We found that growers' personal experience with potential benefits and concerns related to the management practices had significant positive and negative relationships, respectively, with adoption of all three innovations. The influence of these communication links likely has different levels of importance, depending on the stage of the adoption that a practice is experiencing in the agricultural community. Social learning was positively associated with adopting the use of combinations of bees

  1. The Impact of Financial Crisis on the Predictability of the Stock Markets of PIGS Countries – Comparative Study of Prediction Accuracy of Technical Analysis and Neural Networks

    Directory of Open Access Journals (Sweden)

    Katarína Hiľovská

    2011-09-01

    Full Text Available To a degree the financial crisis influenced all European countries but the most affected are the PIGS (Portugal, Ireland, Greece and Spain. We investigated the effect of the financial crisis on the prediction accuracy of artificial neural networks on the Portuguese, Irish, Athens and Madrid Stock Exchange. We applied three-layered feed-forward neural networks with backpropagation algorithm to forecast the next day prices and we compared the paper returns achieved before and after the recent financial crisis. This method failed in forecasting the direction of the next day price movement but performed well in absolute price changes. However, it achieved better results than the strategy based on technical analysis in the period before the crisis. On the other hand, technical analysis performed better during the crisis.

  2. Bildungslandschaft or the inter-organizational cooperation network approach (ICNA) as a new approach to attracting pupils to science and technical education

    DEFF Research Database (Denmark)

    Grunwald, Annette; Henriksen, Lars Bo

    2013-01-01

    The paper presents a short review of the literature on attractiveness and argues for the need to consider an inter-organizational cooperation network (ICNA), which organizes out-of-school learning as a necessary and new perspective to promote attractiveness in technical education. The paper offers...... a case of cooperation: a Pupils’ University, for 5th and 6th grade pupils in primary schools within Northern Jutland, Denmark with a discription of the network and a discussion about how learning structures influensces the learning proces. The paper highlights the contribution of the new concept...

  3. TFE Verification Program. Semiannual report for the period ending March 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The objective of the semiannual progress report is to summarize the technical results obtained during the latest reporting period. The information presented herein will include evaluated test data, design evaluations, the results of analyses and the significance of results. The program objective is to demonstrate the technology readiness of a TFE (thermionic fuel element) suitable for use as the basic element in a thermionic reactor with electric power output in the 0.5 to 5.0 MW(e) range, and a full-power life of 7 years. The TFE Verification Program builds directly on the technology and data base developed in the 1960s and early 1970s in an AEC/NASA program, and in the SP-100 program conducted in 1983, 1984 and 1985. In the SP-100 program, the attractive features of thermionic power conversion technology were recognized but concern was expressed over the lack of fast reactor irradiation data. The TFE Verification Program addresses this concern.

  4. TFE Verification Program semiannual report for the period ending March 31, 1990

    Energy Technology Data Exchange (ETDEWEB)

    1990-07-01

    The objective of the semiannual progress report is to summarize the technical results obtained during the latest reporting period. The information presented herein will include evaluated test data, design evaluations, the results of analyses and the significance of results. The program objective is to demonstrate the technology readiness of a TFE suitable for use as the basic element in a thermionic reactor with electric power output in the 0.5 to 5.0 MW(e) range, and a full-power life of 7 years. The TFE Verification Program builds directly on the technology and data base developed in the 1960s and early 1970s in an AEC/NASA program, and in the SP-100 program conducted in 1983, 1984 and 1985. In the SP-100 program, the attractive features of thermionic power conversion technology were recognized but concern was expressed over the lack of fast reactor irradiation data. The TFE Verification Program addresses this concern. 6 refs., 67 figs., 37 tabs.

  5. Application of neural networks for the calculation of technical losses of electric energy in air power lines 6-35 kV

    Directory of Open Access Journals (Sweden)

    Володимир Леонідович Бакулевський

    2015-11-01

    Full Text Available A model for the calculation of technical losses of electricity in the air lines with voltage of 6-35 kV based on neural networks with due regard to meteorological factors has been worked out; the main components of the model have been considered and researched; the best ones being selected, that is: a set of input variables, volume of excerpts (training, control and testing, architecture and network activation function, network learning algorithm was proposed. Simulation was conducted in OS STATISTICA Neural Networks. Input variables are: transmission line (TL active load, transmission line rated voltage, transmission line cross section and length of wire, average air temperature, wind speed, rainfall availability; output variable – that is technical losses in electric transmission line. To select the optimal input vector model the data selection methods were used: variables testing using trial and error method, variables stepped inclusion and exclusion algorithm. It has been proved that the most important variables are TL active load and average air temperature. all input variables under review should be included in the created artificial neural network (ANN. It was determined that the optimal volume for ANN training set given parameters made 250 observations, control and test excerpts volume were respectively 250 and 332 observations. It has been proved that the best type of architecture is multilayer perceptron ANN that being compared to radial basis functions and generalized regression network is characterized by minimal errors and complexity of the network. ANN of the following architecture: multilayer perceptron, 7 neurons in the input layer, 5 neurons in the hidden layer, 1 output neuron, logistics as activation function – has been taken optimal

  6. Technical Topic 3.2.2.d Bayesian and Non-Parametric Statistics: Integration of Neural Networks with Bayesian Networks for Data Fusion and Predictive Modeling

    Science.gov (United States)

    2016-05-31

    foundations for, integration of predictive neural networks into Bayesian networks as a means of generating probability distribution functions and...using a neural network and secondly, fusing this and other types of sensor output into a single probabilistic evaluation of multiple sensor outputs...Integration of Neural Networks with Bayesian Networks for Data Fusion and Predictive Modeling The views, opinions and/or findings contained in this

  7. Moving forward on strengthening and sustaining National Immunization Technical Advisory Groups (NITAGs) globally: Recommendations from the 2nd global NITAG network meeting.

    Science.gov (United States)

    MacDonald, Noni E; Duclos, Philippe; Wichmann, Ole; Henaff, Louise; Harnden, Anthony; Alshammary, Aisha; Tijerino, Roberto Arroba; Hall, Madeline; Sacarlal, Jahit; Singh, Rupa Rajbhandari

    2017-11-02

    National Immunization Technical Advisory Groups (NITAGs) provide independent, evidence-informed advice to assist their governments in immunization policy formation. This is complex work and many NITAGs face challenges in fulfilling their roles. Inter-country NITAG collaboration opportunities have the potential to enhance NITAG function and grow the quality of recommendations. Hence the many requests for formation of a network linking NITAGs together so they can learn from each other. The first Global NITAG Network (GNN) meeting, held in 2016, led to a push to launch the GNN and grow the network. At the second GNN meeting, held June 28-29, 2017 in Berlin, the GNN was formally inaugurated. Participants discussed GNN governance, reflected on the April 2017 Strategic Advisory Group of Experts (SAGE) on Immunization conclusions concerning strengthening of NITAGs and also shared NITAG experiences in evaluation and inter-country collaborations and independence. They also discussed the role of Regional Technical Advisory Groups on Immunization (RTAGs) and regional networks. A number of issues were raised including NITAGs and communications, dissemination of recommendations and vaccine implementation as well as implications of off-label recommendations. Participants were alerted to immunization evidence assessment sites and value of sharing of resources. They also discussed potential GNN funding opportunities, developed an action plan for 2017-18 and selected a Steering Committee to help move the GNN forward. All participants agreed on the importance of the GNN and the value in attracting more countries to join the GNN. Copyright © 2017.

  8. 17 April 2008 - Head of Internal Audit Network meeting visiting the ATLAS experimental area with CERN ATLAS Team Leader P. Fassnacht, ATLAS Technical Coordinator M. Nessi and ATLAS Resources Manager M. Nordberg.

    CERN Multimedia

    Mona Schweizer

    2008-01-01

    17 April 2008 - Head of Internal Audit Network meeting visiting the ATLAS experimental area with CERN ATLAS Team Leader P. Fassnacht, ATLAS Technical Coordinator M. Nessi and ATLAS Resources Manager M. Nordberg.

  9. Tenth Semiannual Report of the Commission to the Congress, July 1951

    Energy Technology Data Exchange (ETDEWEB)

    Dean, Gordon

    1951-07-01

    The document represents the tenth semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program covering the period January - June 1951.

  10. Twentieth Semiannual Report of the Commission to the Congress, July 1956

    Energy Technology Data Exchange (ETDEWEB)

    Strauss, Lewis L.

    1956-07-31

    The document represents the twentieth semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program covering the period January - June 1956.

  11. Twenty-fourth Semiannual Report of the Commission to the Congress, July 1958

    Energy Technology Data Exchange (ETDEWEB)

    Strauss, Lewis L.; McCone, John A.

    1958-07-31

    The document represents the twenty-fourth semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program covering the period January - June 1958.

  12. Seventeenth Semiannual Report of the Commission to the Congress, January 1955

    Energy Technology Data Exchange (ETDEWEB)

    Strauss, Lewis L.

    1955-01-29

    The document represents the seventeenth semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program covering the period July - December 1954.

  13. Nineteenth Semiannual Report of the Commission to the Congress, January 1956

    Energy Technology Data Exchange (ETDEWEB)

    Strauss, Lewis L.

    1956-01-31

    The document represents the nineteenth semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program covering the period July - December 1955.

  14. Sixteenth Semiannual Report of the Commission to the Congress, July 1954

    Energy Technology Data Exchange (ETDEWEB)

    Strauss, Lewis L.

    1954-07-31

    The document represents the sixteenth semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program covering the period January - June 1954.

  15. Twenty-second Semiannual Report of the Commission to the Congress, July 1957

    Energy Technology Data Exchange (ETDEWEB)

    Strauss, Lewis L.

    1957-07-31

    The document represents the twenty-second semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program covering the period January - June 1957.

  16. A prototype implementation of a network-level intrusion detection system. Technical report number CS91-11

    Energy Technology Data Exchange (ETDEWEB)

    Heady, R.; Luger, G.F.; Maccabe, A.B.; Servilla, M.; Sturtevant, J. [New Mexico Univ., Albuquerque, NM (United States). Dept. of Computer Science

    1991-05-15

    This paper presents the implementation of a prototype network level intrusion detection system. The prototype system monitors base level information in network packets (source, destination, packet size, time, and network protocol), learning the normal patterns and announcing anomalies as they occur. The goal of this research is to determine the applicability of current intrusion detection technology to the detection of network level intrusions. In particular, the authors are investigating the possibility of using this technology to detect and react to worm programs.

  17. Cumulative Index to Twenty Five Semiannual Reports of the Commission to the Congress. January 1947 - January 1959

    Energy Technology Data Exchange (ETDEWEB)

    McCone, John A.

    1960-01-31

    The first twenty five semiannual reports of the United States Atomic Energy Commission to Congress cover the major unclassified activities of the Commission from January 1947 through January 1959. In addition to the semiannual summaries, a series of special reports on important atomic energy programs were included in many of the semiannual reports. This cumulative name and subject index provides a guide to the information published in these reports. Beginning in 1960, the Commission will be issuing annual reports, each separately indexed, ceasing the semiannual reporting.

  18. Semiannual report to Congress, October 1, 1994--March 31, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The Office of Inspector General Semiannual Report to the Congress covers the period October 1, 1994, through March 31, 1995. The report summarizes significant audit, inspection and investigative accomplishments for the reporting period, a large number of which facilitated Department management`s efforts to improve management controls and ensure efficient and effective operation. Narratives of the most significant reports are grouped by six primary performance measures: (1) Recommendations accepted by management, (2) Audit/inspection savings, recoveries, and funds identified for better use, (3) Legislative/regulatory compliance to recommendations, (4) Positive impacts on the Department after implementation of recommendations, (5) Complaints resolved, and (6) Investigation recoveries, fines, and funds identified for better use.

  19. Technical Agency in Practice

    DEFF Research Database (Denmark)

    Krummheuer, Antonia Lina

    2015-01-01

    ) description of hybrid networks in which human and non-human actants are granted agency without differentiating different kinds of agency, EMCA focuses on the member's perspectives and the situated construction of technical agency that is made relevant within an ongoing interaction. Based on an EMCA analysis......The paper combines the discussion of technical agency and hybrid networks of Actor-Network Theory (ANT) with an ethnomethodological/conversation analytical (EMCA) perspective on situated practices in which participants ascribe agency to technical artefacts. While ANT works with (ethnographic...... of three video recordings of situations in which technical agency is made relevant by the human participants, the paper demonstrates different ways in which agency is granted to technical artefacts. Human participants can treat a technology as communication partner, as an active part (and actant...

  20. ERLN Technical Support for Labs

    Science.gov (United States)

    The Environmental Response Laboratory Network provides policies and guidance on lab and data requirements, Standardized Analytical Methods, and technical support for water and radiological sampling and analysis

  1. A Software Tool of Technical and Financial-Economic Analysis for Acquistion of Broadband Radio PPDR Networks

    Directory of Open Access Journals (Sweden)

    Gierszal Henryk

    2016-12-01

    Full Text Available In this paper, we present a software tool that allows preparing econometric analyses aiming at selection of optimal business models for acquisition of broadband mobile networks by PPDR organizations. Such agencies often and often need broadband services to improve operational activities in order to increase the safety, security, and their effectiveness in day-to-day and crisis situations. Upgrade or migration to broadband networks needs careful decisions so as to find a justified trade-off between CAPEX and OPEX. The network evolution can be based on different business models but any approach cannot degrade the reliability, security, and resilience required by PSC.

  2. Cumulative Index to the Sixteenth through the Twentieth Semiannual Reports of the Commission to the Congress. January 1954 - June 1956

    Energy Technology Data Exchange (ETDEWEB)

    Strauss, Lewis L.

    1956-07-30

    The sixteenth through the twentieth semiannual reports of the United States Atomic Energy Commission to Congress are covered in this cumulative index, which included both a name and subject index as aids to finding information in the full reports.. The full semiannual reports themselves cover the major unclassified activities of the Commission from January 1954 through June 1956.

  3. Index to the Twenty-first Semiannual Report of the Commission to the Congress. July 1956 - December 1956

    Energy Technology Data Exchange (ETDEWEB)

    Strauss, Lewis L.

    1957-01-31

    This volume contains a name and subject indext for the twenty-first semiannual report of the United States Atomic Energy Commission to Congress. The full semiannual report covers the major unclassified activities of the Commission from July 1956 through December 1956.

  4. Ionospheric F2-Layer Semi-Annual Variation in Middle Latitude by Solar Activity

    Directory of Open Access Journals (Sweden)

    Yoon-Kyung Park

    2010-12-01

    Full Text Available We examine the ionospheric F2-layer electron density variation by solar activity in middle latitude by using foF2 observed at the Kokubunji ionosonde station in Japan for the period from 1997 to 2008. The semi-annual variation of foF2 shows obviously in high solar activity (2000-2002 than low solar activity (2006-2008. It seems that variation of geomagnetic activity by solar activity influences on the semi-annual variation of the ionospheric F2-layer electron density. According to the Lomb-Scargle periodogram analysis of foF2 and Ap index, interplanetary magnetic field (IMF Bs (IMF Bz <0 component, solar wind speed, solar wind number density and flow pressure which influence the geomagnetic activity, we examine how the geomagnetic activity affects the ionospheric F2-layer electron density variation. We find that the semi-annual variation of daily foF2, Ap index and IMF Bs appear clearly during the high solar activity. It suggests that the semi-annual variation of geomagnetic activity, caused by Russell-McPherron effect, contributes greatly to the ionospheric F2-layer semi-annual electron density variation, except dynamical effects in the thermosphere.

  5. Report: Results of Technical Network Vulnerability Assessment: EPA’s National Health & Environment Effects Research Laboratory, Western Ecology Division

    Science.gov (United States)

    Report #11-P-0429, August 3, 2011. Vulnerability testing of EPA’s NHEERL Western Ecology Division network conducted in March 2011 identified Internet Protocol addresses with numerous high-risk and medium-risk vulnerabilities.

  6. The Value of Sustainable Knowledge Transfer Methods for SMEs, Utilizing Socio-Technical Networks and Complex Systems

    Directory of Open Access Journals (Sweden)

    Susu Nousala

    2010-12-01

    Full Text Available This paper will examine the development of sustainable SME methods for tracking tacit (informal knowledge transfer as a series of networks of larger complex system. Understanding sustainable systems begins with valuing tacit knowledge networks and their ability to produce connections on multiple levels. The behaviour of the social or socio aspects of a system in relation to the explicit formal/physical structures need to be understood and actively considered when utilizing methodologies for interacting within complex systems structures. This paper utilizes theory from several previous studies to underpin the key case study discussed. This approach involved examining the behavioural phenomena of an SME knowledge network. The knowledge network elements were highlighted to identify their value within an SME structure. To understand the value of these emergent elements from between tacit and explicit knowledge networks, is to actively, simultaneously and continuous support sustainable development for SME organizations. The simultaneous links within and between groups of organizations is crucial for understanding sustainable networking structures of complex systems.

  7. Technical assessment of forest road network using Backmund and surface distribution algorithm in a hardwood forest of Hyrcanian zone

    Energy Technology Data Exchange (ETDEWEB)

    Parsakhoo, P.

    2016-07-01

    Aim of study: Corrected Backmund and Surface Distribution Algorithms (SDA) for analysis of forest road network are introduced and presented in this study. Research was carried out to compare road network performance between two districts in a hardwood forest. Area of study: Shast Kalateh forests, Iran. Materials and methods: In uncorrected Backmund algorithm, skidding distance was determined by calculating road density and spacing and then it was designed as Potential Area for Skidding Operations (PASO) in ArcGIS software. To correct this procedure, the skidding constraint areas were taken using GPS and then removed from PASO. In SDA, shortest perpendicular distance from geometrical center of timber compartments to road was measured at both districts. Main results: In corrected Backmund, forest openness in district I and II were 70.3% and 69.5%, respectively. Therefore, there was little difference in forest openness in the districts based on the uncorrected Backmund. In SDA, the mean distance from geometrical center of timber compartments to the roads of districts I and II were 199.45 and 149.31 meters, respectively. Forest road network distribution in district II was better than that of district I relating to SDA. Research highlights: It was concluded that uncorrected Backmund was not precise enough to assess forest road network, while corrected Backmund could exhibit a real PASO by removing skidding constraints. According to presented algorithms, forest road network performance in district II was better than district I. (Author)

  8. Third Semiannual Report to the Congress by the United States Atomic Energy Commission, February 2, 1948

    Energy Technology Data Exchange (ETDEWEB)

    Lilienthal, David E.; Bacher, Robert F.; Pike, Sumner T.; Strauss, Lewis L.; Waymack, William W.

    1948-02-02

    The document includes the letter of submittal and the third semiannual report. These reports are called for pursuant to Section 17 of the Atomic Energy Act of 1946. The letter of submittal was titled ''Letter from the Chairman and Members of the United States Atomic Energy Commission transmitting pursuant to law the third semiannual report of the Atomic Energy Commission''. It was authored by David E. Lilienthal, Chairman, and Robert F. Bacher, Sumner T. Pike, Lewis L. Strauss, and William W. Waymack of the AEC.

  9. Directory of On-Line Networks, Databases and Bulletin Boards on Assistive Technology. Second Edition. RESNA Technical Assistance Project.

    Science.gov (United States)

    RESNA: Association for the Advancement of Rehabilitation Technology, Washington, DC.

    This resource directory provides a selective listing of electronic networks, online databases, and bulletin boards that highlight technology-related services and products. For each resource, the following information is provided: name, address, and telephone number; description; target audience; hardware/software needs to access the system;…

  10. The development of Sustainability Graduate Community (SGC) as a learning pathway for sustainability education - a framework for engineering programmes in Malaysia Technical Universities Network (MTUN)

    Science.gov (United States)

    Johan, Kartina; Mohd Turan, Faiz

    2016-11-01

    ‘Environmental and sustainability’ is one of the Program Outcome (PO) designated by the Board of Engineers Malaysia (BEM) as one of the accreditation program requirement. However, to-date the implementation of sustainability elements in engineering programme in the technical universities in Malaysia is within individual faculty's curriculum plan and lack of university-level structured learning pathway, which enable all students to have access to an education in sustainability across all disciplines. Sustainability Graduate Community (SGC) is a framework designed to provide a learning pathway in the curriculum of engineering programs to inculcate sustainability education among engineering graduates. This paper aims to study the required attributes in Sustainability Graduate Community (SGC) framework to produce graduates who are not just engineers but also skilful in sustainability competencies using Global Project Management (GPM) P5 Standard for Sustainability. The development of the conceptual framework is to provide a constructive teaching and learning plan for educators and policy makers to work on together in developing the Sustainability Graduates (SG), the new kind of graduates from Malaysia Technical Universities Network (MTUN) in Malaysia who are literate in sustainability practices. The framework also support the call for developing holistic students based on Malaysian Education Blueprint (Higher Education) and address the gap between the statuses of engineering qualification to the expected competencies from industries in Malaysia in particular by achieving the SG attributes outlined in the framework

  11. Technical report: The design and evaluation of a basin-scale wireless sensor network for mountain hydrology

    Science.gov (United States)

    Zhang, Ziran; Glaser, Steven D.; Bales, Roger C.; Conklin, Martha; Rice, Robert; Marks, Danny G.

    2017-05-01

    A network of sensors for spatially representative water-balance measurements was developed and deployed across the 2000 km2 snow-dominated portion of the upper American River basin, primarily to measure changes in snowpack and soil-water storage, air temperature, and humidity. This wireless sensor network (WSN) consists of 14 sensor clusters, each with 10 measurement nodes that were strategically placed within a 1 km2 area, across different elevations, aspects, slopes, and canopy covers. Compared to existing operational sensor installations, the WSN reduces hydrologic uncertainty in at least three ways. First, redundant measurements improved estimation of lapse rates for air and dew-point temperature. Second, distributed measurements captured local variability and constrained uncertainty in air and dew-point temperature, snow accumulation, and derived hydrologic attributes important for modeling and prediction. Third, the distributed relative-humidity measurements offer a unique capability to monitor upper-basin patterns in dew-point temperature and characterize elevation gradient of water vapor-pressure deficit across steep, variable topography. Network statistics during the first year of operation demonstrated that the WSN was robust for cold, wet, and windy conditions in the basin. The electronic technology used in the WSN-reduced adverse effects, such as high current consumption, multipath signal fading, and clock drift, seen in previous remote WSNs.

  12. Wild life passer species recognition from a technical passage through data fusion of a wireless sensor network

    Science.gov (United States)

    Gazis, A.; Katsiri, E.

    2017-09-01

    This paper presents a Wireless Sensor Network (WSN) system which was created as a project about protecting wildlife using sensor networks following the assistance of the department of Electrical and Computer Engineering of the Democritus University of Thrace. An automated process was implemented, regarding the recognition of a passenger (ie human, wolf, bear, etc.) traversing a box-shaped underground passage, such as the ones located along main highways fusing Width, Height and Weight values. These were measured using low-cost distance (beam) and weight (S-type load) micro-sensors and stored in a central repository. Moreover, the information provided by the WSN was analyzed, via a variety of methods including a neural pattern recognition network as well as clustering algorithms, which were able to recognize the kind of passenger, with certainty scores over 90%. The main concern, regarding the future, is the evaluation of these passages in respect to their effectiveness, i.e. whether they are frequently utilized by animals. This information was further analysed by appropriate information systems, in order to provide insights about the effectiveness of such mitigation structures.

  13. Semiannual report to Congress, October 1, 1995--March 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-04-01

    This Office of Inspector General Semiannual Report to the Congress covers the period from October 1, 1995, through March 31, 1996. The report summarizes significant audit, inspection, and investigative accomplishments for the reporting period, a large portion of which facilitated Department of Energy management efforts to improve management controls and ensure efficient and effective operation of its programs. A major accomplishment during this period was the completion of financial statement audits for Fiscal Year 1995. Annual financial statement audits are mandated by the Chief Financial Officers Act of 1990. Narratives of our most significant reports are grouped by measures which the Office of Inspector General uses to gauge its performance. The common thread that ties the performance measures together is their emphasis on supporting Department efforts to produce high quality products at the lowest possible cost to the taxpayer. During this reporting period, the Office of Inspector General issued 67 audit and 15 inspection reports. For reports issued during the period, the Office of Inspector General made audit recommendations that, when implemented by management, could result in $134.6 million being put to better use. Management committed to taking corrective actions which the Office of Inspector General estimates will result in a more efficient use of funds totaling $333.2 million. Office of Inspector General investigations led to 6 criminal convictions and 1 pretrial diversion, as well as criminal and civil prosecutions which resulted in fines and recoveries of $10,942,714. The Office of Inspector General also provided 33 investigative referrals to management for recommended positive action.

  14. 78 FR 44199 - Semiannual Regulatory Agenda, Spring 2013

    Science.gov (United States)

    2013-07-23

    ... Supplemental Appropriations Act (2002 Appropriations) (Pub. L. 107-206), and the Food, Conservation and Energy... --Conservation contracts. FSA is also making technical and conforming amendments. The amendments are technical... to the Animal Welfare Act (AWA). The Food, Conservation, and Energy Act of 2008 added a new section...

  15. Fifth Semiannual Report of the Commission to the Congress: Atomic Energy Development, 1947- 1948

    Energy Technology Data Exchange (ETDEWEB)

    Lilienthal, David E.; Bacher, Robert F.; Pike, Sumner T.; Strauss, Lewis L.

    1949-01-01

    The document represents the fifth semiannual report to Congress, covering specifically the various developments in atomic energy since the inception of the Atomic Energy Commission in 1946. This fifth report represents an expansion of effort in all phases of atomic energy development and is prepared against a background of world affairs.

  16. Eleventh Semiannual Report of the Commission to the Congress, January 1952

    Energy Technology Data Exchange (ETDEWEB)

    Dean, Gordon

    1952-01-31

    The document represents the eleventh semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program covering the period July - December 1951. Part II covers financial aspects and Part III, Applications in Plant Science.

  17. Eighth Semiannual Report of the Commission to the Congress, July 1950

    Energy Technology Data Exchange (ETDEWEB)

    Dean, Gordon; Murray, Thomas E.; Pike, Sumner T.; Smyth, H. D.

    1950-07-01

    The document represents the eighth semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program. As has been done in several of the previous mid-year reports, this report includes detail on another major phase of the national atomic energy program: control of radiation hazards.

  18. Low-rank coal research semiannual report, January 1992--June 1992

    Energy Technology Data Exchange (ETDEWEB)

    1992-12-31

    This semiannual report is a compilation of seventeen reports on ongoing coal research at the University of North Dakota. The following research areas are covered: control technology and coal preparation; advanced research and technology development; combustion; liquefaction and gasification. Individual papers have been processed separately for inclusion in the Energy Science and Technology Database.

  19. Thirteenth Semiannual Report of the Commission to the Congress, January 1953

    Energy Technology Data Exchange (ETDEWEB)

    Dean, Gordon

    1953-01-31

    The document represents the thirteenth semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program covering the period July - December 1952. Part two focuses on the annual financial report, while part three covers public safety in continental weapons tests.

  20. Modeling the impact and costs of semiannual mass drug administration for accelerated elimination of lymphatic filariasis.

    Directory of Open Access Journals (Sweden)

    Wilma A Stolk

    Full Text Available The Global Program to Eliminate Lymphatic Filariasis (LF has a target date of 2020. This program is progressing well in many countries. However, progress has been slow in some countries, and others have not yet started their mass drug administration (MDA programs. Acceleration is needed. We studied how increasing MDA frequency from once to twice per year would affect program duration and costs by using computer simulation modeling and cost projections. We used the LYMFASIM simulation model to estimate how many annual or semiannual MDA rounds would be required to eliminate LF for Indian and West African scenarios with varied pre-control endemicity and coverage levels. Results were used to estimate total program costs assuming a target population of 100,000 eligibles, a 3% discount rate, and not counting the costs of donated drugs. A sensitivity analysis was done to investigate the robustness of these results with varied assumptions for key parameters. Model predictions suggested that semiannual MDA will require the same number of MDA rounds to achieve LF elimination as annual MDA in most scenarios. Thus semiannual MDA programs should achieve this goal in half of the time required for annual programs. Due to efficiency gains, total program costs for semiannual MDA programs are projected to be lower than those for annual MDA programs in most scenarios. A sensitivity analysis showed that this conclusion is robust. Semiannual MDA is likely to shorten the time and lower the cost required for LF elimination in countries where it can be implemented. This strategy may improve prospects for global elimination of LF by the target year 2020.

  1. Fourteenth Semiannual Report of the Commission to the Congress. Major Activities in the Atomic Energy Programs, January - June 1953

    Energy Technology Data Exchange (ETDEWEB)

    Dean, Gordon

    1953-07-31

    The document represents the fourteenth semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program covering the period January - June 1953.

  2. Twelfth Semiannual Report of the Commission to the Congress. Major Activities in the Atomic Energy Programs, January - June 1952

    Energy Technology Data Exchange (ETDEWEB)

    Dean, Gordon

    1952-07-01

    The document represents the twelfth semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program covering the period January - June 1952.

  3. Eighteenth Semiannual Report of the Commission to the Congress. Major Activities in the Atomic Energy Programs, January - June 1955

    Energy Technology Data Exchange (ETDEWEB)

    Strauss, Lewis L.

    1955-07-30

    The document represents the eighteenth semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program covering the period January - June 1955.

  4. Fifteenth Semiannual Report of the Commission to the Congress. Major Activities in the Atomic Energy Programs, July - December 1953

    Energy Technology Data Exchange (ETDEWEB)

    Dean, Gordon

    1954-01-31

    The document represents the fifteenth semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program covering the period July - December 1953.

  5. Evaluation of technical solutions for the enhancement of distribution networks with a high degree of distributed generation; Bewertung technischer Loesungen fuer den Ausbau von Verteilungsnetzen mit einem hohen Grad an EEG-Einspeisung

    Energy Technology Data Exchange (ETDEWEB)

    Mueller, Holger; Ramold, Mathias; Ettinger, Andreas [Siemens AG, Erlangen (Germany)

    2012-07-01

    The share of distributed renewable generation is dramatically growing since years in Germany due to the existing subsidies for renewable energy sources. As a consequence the existing distribution networks and primarily the low-voltage (LV) networks have to change to maintain the same degree of power quality and security of supply. This paper described resulting new challenges, which will have a major impact on the distribution networks. To solve the problems today utilities are mainly focussing on conventional measures, like network extension or adding new substation. Compared to this classical measures new solutions and technologies are described. These solutions shall enable the distribution network operators (DSO) to optimize the necessary investment costs. Finally the main described solutions will be evaluated and compared to the conventional measures using three typical and realistic LV networks. For each network the share of renewable energy is adjusted in different steps and the impact on the network is assessed taking into account the technical as well as the economic behaviour. (orig.)

  6. Office of Inspector General semiannual report to Congress, October 1, 1996--March 31, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    This Office of Inspector General Semiannual Report to the Congress covers the period from October 1, 1996, through March 31, 1997. The report summarizes significant audit, inspection, and investigative accomplishments for the reporting period which facilitated Department of Energy management efforts to improve management controls and ensure efficient and effective operation of its programs. Narratives of the most significant reports are grouped by measures which the Office of Inspector General uses to gauge its performance. The common thread that ties the performance measures together is their emphasis on supporting Department efforts to produce high quality products at the lowest possible cost to the taxpayer. Five such performance measures were used during this semiannual period to present outcomes of Office of Inspector General work in terms of improvements in Department programs and operations.

  7. Nuclear waste management. Semiannual progress report, October 1982-March 1983

    Energy Technology Data Exchange (ETDEWEB)

    Chikalla, T.D.; Powell, J.A. (comps.)

    1983-06-01

    This document is one of a series of technical progress reports designed to report radioactive waste management programs at the Pacific Northwest Laboratory. Accomplishments in the following programs are reported: waste stabilization; Materials Characterization Center; waste isolation; low-level waste management; remedial action; and supporting studies.

  8. Solar polar magnetic field dependency of geomagnetic activity semiannual variation indicated in the Aa index

    Science.gov (United States)

    Oh, Suyeon; Yi, Yu

    2018-01-01

    Three major hypotheses have been proposed to explain the well-known semiannual variation of geomagnetic activity, maxima at equinoxes and minima at solstices. This study examined whether the seasonal variation of equinoctial geomagnetic activity is different in periods of opposite solar magnetic polarity in order to understand the contribution of the interplanetary magnetic field (IMF) in the Sun-Earth connection. Solar magnetic polarity is parallel to the Earth's polarity in solar minimum years of odd/even cycles but antiparallel in solar minimum years of even/odd cycles. The daily mean of the aa, Aa indices during each solar minimum was compared for periods when the solar magnetic polarity remained in opposite dipole conditions. The Aa index values were used for each of the three years surrounding the solar minimum years of the 14 solar cycles recorded since 1856. The Aa index reflects seasonal variation in geomagnetic activity, which is greater at the equinoxes than at the solstices. The Aa index reveals solar magnetic polarity dependency in which the geomagnetic activity is stronger in the antiparallel solar magnetic polarity condition than in the parallel one. The periodicity in semiannual variation of the Aa index is stronger in the antiparallel solar polar magnetic field period than in the parallel period. Additionally, we suggest the favorable IMF condition of the semiannual variation in geomagnetic activity. The orientation of IMF toward the Sun in spring and away from the Sun in fall mainly contributes to the semiannual variation of geomagnetic activity in both antiparallel and parallel solar minimum years.

  9. Semiannual Variation in the Number of Energetic Electron Precipitation Events Recorded in the Polar Atmosphere

    Science.gov (United States)

    Stozhkov, Y. Ivanovich; Makhmutov, V. S.; Bazilevskaya, G. A.; Krainev, M. B.; Svirkhevskaya, A. K.; Svirzhevsky, N. S.; Mailin, S. Y.

    2003-07-01

    The analysis of the monthly numbers of Electron Precipitation Events (EPEs) recorded at Olenya station (Murmansk region) during 1970-1987, shows the semiannual variation with two maxima centered on April and September. We analyse the interplanetary plasma and geomagnetic indices data sets associated with the EPEs recorded. The possible relationship of this variation and RusselMcPherron, Equino ctial and Axial effects is discussed.

  10. National Institute for Global Environmental Change. Semi-annual report, July 1, 1991--December 31, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Werth, G.C.

    1992-04-01

    This document is the Semi-Annual Report of the National Institute for Global Environmental Change for the reporting period July 1 to December 31, 1991. The report is in two parts. Part I presents the mission of the Institute, examples of progress toward that mission, a brief description of the revised management plan, and the financial report. Part II presents the statements of the Regional Center Directors along with progress reports of the projects written by the researchers themselves.

  11. Fourth Semiannual Report to the Congress by the United States Atomic Energy Commission, July 1948

    Energy Technology Data Exchange (ETDEWEB)

    Lilienthal, David E.; Bacher, Robert F.; Pike, Sumner T.; Strauss, Lewis L.; Waymack, William W.

    1948-07-01

    The document includes the letter of submittal and the Fourth semiannual report. These reports are called for pursuant to Section 17 of the Atomic Energy Act of 1946. This fourth report incorporates some changes to the report. In order to make these reports of maximum value to Members of Congress, the Commission has prepared this mid-year report as a specialized document giving a comprehensive account of several major phases of the atomic energy program.

  12. Sensitivity of the Southern Hemisphere Semiannual Oscillation in surface pressure to changes in surface boundary conditions

    OpenAIRE

    Walland, David J.; Simmonds, Ian H.

    2011-01-01

    The Melbourne University General Circulation Model has been used to simulate the climateof the Southern Hemisphere and its portrayal of the Semiannual Oscillation (SAO) in surfacepressure has been assessed. The model is shown to underestimate the amplitude of the SAOslightly but simulate its general structure quite well. To assess the relative importance of variousfactors in determining the characteristics of the SAO, we perform several anomaly experiments.In particular, we conduct an experim...

  13. Semiannual Report to the Congress. October 1, 2012 to March 31, 2013

    Science.gov (United States)

    2013-03-01

    Inspections OCTOBER 1, 2012 TO MARCH 31, 201346 47SEMIANNUAL REPORT TO THE CONGRESS Core Mission Areas ment process for cleaning supplies, including...authorizations and service contracts, IMCOM created FY 2013 provisional tables of distribu- tion and allowances, making implementation of the TSS models...and whether U.S. contract employees completed required medical/ dental assessments prior to deployment. Findings: Medical officials provided nonemer

  14. Twenty-third Semiannual Report of the Commission to the Congress, January 1958. Progress in peaceful uses of atomic energy July - December 1957

    Energy Technology Data Exchange (ETDEWEB)

    Strauss, Lewis L.

    1958-01-31

    The document represents the twenty-third semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program covering the period July - December 1957. A special part one of this semiannual report is titled ''Progress in the Peaceful Uses of Atomic Energy - A 3-year Summary.

  15. HANFORD SITE AIR OPERATING PERMIT SEMIANNUAL REPORT FOR THE PERIOD 07/01/2004 THRU 12/31/2004

    Energy Technology Data Exchange (ETDEWEB)

    GREEN, W.E.

    2005-01-19

    The Hanford Site Air Operating Permit (AOP), Number 00-05-006, became effective on July 2, 2001. One condition contained in the AOP, ''Standard Terms and Conditions'', Section 4.3.3, is the requirement to submit semiannual reports by March 15th and September 15th each year, which are certified for truth, accuracy, and completeness by a Responsible Official. This semiannual report contains information from July 1, 2004 through December 31, 2004. Copies of semiannual reports are transmitted to the Washington State Department of Ecology (Ecology). the Washington State Department of Health (WDOH), the Benton Clean Air Authority (BCAA), and the US Environmental Protection Agency (EPA), Region 10. For the applicable reporting period, AOP, ''Standard Terms and Conditions'', Section 4.3.3, as amended in August 2002 and December 2002, identifies the following. (1) Each semiannual report will provide a reference to deviation reports submitted to the regulatory agencies as required by Section 4.5. ''Permit Deviation Reporting''. (2) Each semiannual report will consist of reports of any required monitoring not submitted previously to the agencies or a reference to reports of required monitoring submitted during the reporting period. (3) Each semiannual report will contain a summary of any substantiated air emission complaint investigation(s) required in Table 1.2 of AOP, Attachment 1, and issued during the reporting period. (4) For all minor radioactive emission points (potential to emit <0.1 mrem to the maximally exposed individual) listed in AOP, Attachment 2. Tables 1.2. 1.3, and 2.1, each semiannual report will confirm that any required monitoring was conducted to verify low emissions during the reporting period. Data derived from that monitoring will be reported in the Annual National Emission Standards for Hazardous Air Pollutants (NESHAP) Report (AOP, ''Standard Terms and Conditions

  16. Features of annual and semiannual variations derived from the global ionospheric maps of total electron content

    Directory of Open Access Journals (Sweden)

    B. Zhao

    2008-01-01

    Full Text Available In the present work we use the NASA-JPL global ionospheric maps of total electron content (TEC, firstly to construct TEC maps (TEC vs. magnetic local time MLT, and magnetic latitude MLAT in the interval from 1999 to 2005. These TEC maps were, in turn, used to estimate the annual-to-mean amplitude ratio, A1, and the semiannual-to-mean amplitude ratio, A2, as well as the latitudinal symmetrical and asymmetrical parts, A' and A" of A1. Thus, we investigated in detail the TEC climatology from maps of these indices, with an emphasis on the quantitative presentation for local time and latitudinal changes in the seasonal, annual and semiannual anomalies of the ionospheric TEC. Then we took the TEC value at 14:00 LT to examine various anomalies at a global scale following the same procedure. Results reveal similar features appearing in NmF2, such as that the seasonal anomaly is more significant in the near-pole regions than in the far-pole regions and the reverse is true for the semiannual anomaly; the winter anomaly has least a chance to be observed at the South America and South Pacific areas. The most impressive feature is that the equinoctial asymmetry is most prominent at the East Asian and South Australian areas. Through the analysis of the TIMED GUVI columnar [O/N2] data, we have investigated to what extent the seasonal, annual and semiannual variations can be explained by their counterparts in [O/N2]. Results revealed that the [O/N2] variation is a major contributor to the daytime winter anomaly of TEC, and it also contributes to some of the semiannual and annual anomalies. The contribution to the anomalies unexplained by the [O/N2] data could possibly be due to the dynamics associated with thermospheric winds and electric fields.

  17. Network Simulation of Technical Architecture

    National Research Council Canada - National Science Library

    Cave, William

    1998-01-01

    ..., and development of the Army Battle Command System (ABCS). PSI delivered a hierarchical iconic modeling facility that can be used to structure and restructure both models and scenarios, interactively, while simulations are running...

  18. Network maintenance

    CERN Multimedia

    IT Department

    2009-01-01

    A site wide network maintenance has been scheduled for Saturday 28 February. Most of the network devices of the General Purpose network will be upgraded to a newer software version, in order to improve our network monitoring capabilities. This will result in a series of short (2-5 minutes) random interruptions everywhere on the CERN sites along this day. This upgrade will not affect: the Computer centre itself, building 613, the Technical Network and the LHC experiments dedicated networks at the pits. Should you need more details on this intervention, please contact Netops by phone 74927 or email mailto:Netops@cern.ch. IT/CS Group

  19. Network maintenance

    CERN Multimedia

    GS Department

    2009-01-01

    A site-wide network maintenance operation has been scheduled for Saturday 28 February. Most of the network devices of the general purpose network will be upgraded to a newer software version, in order to improve our network monitoring capabilities. This will result in a series of short (2-5 minutes) random interruptions everywhere on the CERN sites throughout the day. This upgrade will not affect the Computer Centre itself, Building 613, the Technical Network and the LHC experiments, dedicated networks at the pits. For further details of this intervention, please contact Netops by phone 74927 or e-mail mailto:Netops@cern.ch. IT/CS Group

  20. HTGR generic technology program. Semiannual report ending March 31, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-01

    This document reports the technical accomplishments on the HTGR Generic Technology Program at General Atomic during the first half of FY-80. It covers a period when the design direction of the National HTGR Program is in the process of an overall review. The HTGR Generic Technology Program activities have continued so as to provide the basic technology required for all HTGR applications. The activities include the need to develop an MEU fuel and the need to qualify materials and components for the higher temperatures of the gas turbine and process heat plants.

  1. Hanford Site Air Operating Permit Semiannual Report for the period July 21 2001 Thru December 31 2001

    Energy Technology Data Exchange (ETDEWEB)

    GREEN, W.E.

    2002-02-01

    The Hanford Site Air Operating Permit (AOP), Number 00-05-006, became effective on July 2, 2001. One condition contained in the AOP, ''Standard Terms and Conditions'', Section 4.3.3, is the requirement to submit semiannual reports by March 15th and August 15th each year, which are certified for truth and accuracy by a Responsible Official. This first semiannual report contains information for the period from July 2, 2001 through December 31, 2001. Hereafter, the March 15th semiannual report will contain information for the period from July 1 through December 31. The semiannual report submitted by August 15th will contain information for the period from January 1 through June 30. Copies of the semiannual reports are transmitted to the Washington State Department of Ecology (Ecology), the Washington State Department of Health (WDOH), the Benton Clean Air Authority (BCAA), and the U.S. Environmental Protection Agency (EPA), Region 10. For the applicable reporting period, AOP, ''Standard Terms and Conditions'', Section 4.3.3, identifies the following: (1) Each semiannual report will provide a reference to deviation reports submitted to the regulatory agencies as required by Section 4.5, ''Permit Deviation Reporting''. (2) Each semiannual report will consist of reports of any required monitoring not submitted previously to the agencies or a reference to reports of required monitoring that were submitted during the reporting period. (3) Each semiannual report will contain a summary of any substantiated air emission complaint investigation(s) required in Table 1.2 of AOP, Attachment 1, and issued during the reporting period (4) For all minor radioactive emission points (potential to emit <0.1 mrem to the maximally exposed individual) listed in AOP, Attachment 2. Tables 1.2, 1.3 and 2.1. each semiannual report will confirm that any required monitoring was conducted to verify low emissions during the reporting

  2. The National Shipbuilding Research Program. Proceedings of the REAPS Technical Symposium. Paper No. 12: Network Scheduling of Shipyard Production, Engineering, and Material Procurement

    Science.gov (United States)

    1979-09-01

    Critical Delivery Schedules 2 2 5 MICRONETS Pre-developed sub-networks: * Can be used for any number of projects * Can be used as often as needed...within a given project * Can be linked to other micronets major Benefits: * Increased Confidence in Network By Production and Management * Reduced Network

  3. Technical and economic assessment of a network controller in comparison to the grid extension due to EEG; Technische und wirtschaftliche Betrachtung eines Netzregelgeraetes im Vergleich zu einem Netzausbau aufgrund EEG

    Energy Technology Data Exchange (ETDEWEB)

    Wanner, Ulrich; Aigner, Andreas [LEW Netzservice GmbH, Augsburg (Germany); Finkel, Michael [Hochschule Augsburg (Germany)

    2011-07-01

    For the transition to a sustainable energy supply Germany anchored basic cornerstones in the EEG. In paragraph 2(2) of the EEG, the priority purchase, transmission and distribution of the electric energy by the network operator is controlled. From this for the Lechwerke AG results a completely new environment. The legal framework requires costly network expansion projects, especially in the network periphery in rural areas. For the distribution system operator the traditional grid extension is costly and time consuming. In search of alternative options, the use of ''network controller'' and ''950-V-lines'' is compared to the conventional grid extension. The measurements showed that the 20 kV grid upgrade is the ideal solution from a technical aspect. The improvement of the network situation is clearly evident in all measurements in accordance with DIN 50160. In turn, network expansion is the most expensive alternative and the costs often do not outweigh the benefits. Also the high costs for maintenance and operation have to be considered. Furthermore, often power reserves are created that may not be used. The 950-V line is a measure that improves the network situation. Considering the costs, this variant is the cheapest option, but only a maximum power of 30 kVA can be transmitted. The follow-up costs for maintenance and operation are significantly lower. The increase of the nominal voltage by the factor 2.3,8 in theory the short circuit power should increase by the factor (2.38){sup 2}. However this is not the case, since through the added impedance of the transformer the voltage increase in the cable pushes down the effect. The short circuit power is improved only by the factor 1.36. The power controller controls the voltage level (10-minute averages) quite well. However, flicker and voltage imbalance are increased. Harmonics are increased if they are caused by customers behind the power controller. The development of

  4. Imagining Technicities

    DEFF Research Database (Denmark)

    Liboriussen, Bjarke; Plesner, Ursula

    2011-01-01

    to the elements of taste and skill. In the final analysis those references were synthesized as five imagined technicities: the architect, the engineer, the client, the Chinese, and the Virtual World native. Because technicities are often assumed and rarely discussed as actants who influence practice, their role......, this article focuses on innovative uses of virtual worlds in architecture. We interviewed architects, industrial designers and other practitioners. Conceptually supported by an understanding of technicity found in Cultural Studies, the interviews were then coded with a focus on interviewees’ references...

  5. Ninth Semiannual Report of the Commission to the Congress, July - December 1950. January 1951

    Energy Technology Data Exchange (ETDEWEB)

    Dean, Gordon; Glennan, T. Keith; Murray, Thomas E.; Pike, Sumner T.; Smyth, H. D.

    1951-01-31

    The document represents the ninth semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program. This ninth report gives a summary of the year's program operations insofar as they can be reported within the limits of national security. It provides as well a brief review of the methods which the Commission follows in contracting with industries, research institutions, and with universities and colleges for the carrying on of the many phases of the national atomic energy program.

  6. Predictions of academic achievements of vocational and technical high school students with artificial neural networks in science courses (physics, chemistry and biology) in Turkey and measures to be taken for their failures

    OpenAIRE

    Yağcı Ali; Çevik Mustafa

    2017-01-01

    The aim of this study is to predict academic achievements of vocational and technical high school (VTHS) students with artificial neural networks (ANN) in physics, chemistry and biology courses in Turkey and reveal measures to be taken for their failures. The study group consisted of 922 students studying in 10th and 11th grade in VTHS. This study was conducted with the survey method and a 34-item demographic questionnaire was developed in order to collect the data. The parameters in the ques...

  7. 17 CFR 270.30b1-1 - Semi-annual report for registered management investment companies.

    Science.gov (United States)

    2010-04-01

    ... investment company shall file a semi-annual report on Form N-SAR (§ 274.101 of this chapter) not more than... registered management investment companies. 270.30b1-1 Section 270.30b1-1 Commodity and Securities Exchanges SECURITIES AND EXCHANGE COMMISSION (CONTINUED) RULES AND REGULATIONS, INVESTMENT COMPANY ACT OF 1940 § 270...

  8. Data Summary Report for the Semiannual Tritium Survey for Fourmile Branch and the F- and H-Area Seeplines

    Energy Technology Data Exchange (ETDEWEB)

    Koch, J. II [Westinghouse Savannah River Company, AIKEN, SC (United States) Exploration Resources

    1996-12-16

    This report presents a summary of the definitive data validation and verification for the Semiannual Tritium Survey for Fourmile Branch and the F- and H-Area Seeplines. The survey was performed at the request of the WSRC ERD and conducted by WSRC/ESS. This report was prepared under the direction of EPD/EMS.

  9. Data Summary Report for the 1998 Semiannual Tritium Surveys for Fourmile Branch and the F- and H-Area Seeplines

    Energy Technology Data Exchange (ETDEWEB)

    Koch, J.

    1999-01-26

    This report presents a summary of the definitive data validation and verification for the 1998 semiannual tritium surveys for Fourmile Branch and the F- and H-Area Seeplines. The project was performed under the direction of WSRC EAS/Ecology. This report was prepared under the direction of EPD/EMS.

  10. Cumulative Index to the First Fifteen Semiannual Reports of the Commission to the Congress. January 1947 - 1953

    Energy Technology Data Exchange (ETDEWEB)

    Dean, Gordon

    1954-01-31

    The first fifteen semiannual reports of the United States Atomic Energy Commission to Congress cover the major unclassified activities of the Commission from January 1947 through December 1953. This cumulative name and subject index provides a guide to the information published in these reports.

  11. 17 CFR 249.330 - Form N-SAR, annual and semi-annual report of certain registered investment companies.

    Science.gov (United States)

    2010-04-01

    ...-annual report of certain registered investment companies. 249.330 Section 249.330 Commodity and... Exchange Act of 1934 § 249.330 Form N-SAR, annual and semi-annual report of certain registered investment...) and the rules and regulations thereunder. Editorial Note: For Federal Register citations affecting...

  12. Seventh Semiannual Report of the Commission to the Congress: Atomic Energy and the Physical Sciences, January 1950

    Energy Technology Data Exchange (ETDEWEB)

    Lilienthal, David E.

    1950-01-01

    The document represents the seventh semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up briefly the major activities and developments in the national atomic energy program in Part I. Part II focuses on research in the physical sciences and progress in atomic energy.

  13. 75 FR 38533 - Medicare Program; Second Semi-Annual Meeting of the Advisory Panel on Ambulatory Payment...

    Science.gov (United States)

    2010-07-02

    ... the Advisory Panel on Ambulatory Payment Classification Groups--August 23 & 24, 2010 AGENCY: Centers...: This notice announces the second semi-annual meeting of the Advisory Panel on Ambulatory Payment.../FACA/05_AdvisoryPanelonAmbulatoryPaymentClassificationGroups.asp#TopOfPage to obtain the following...

  14. Technical Conditions of Microgenerator Connection to a Low Voltage Network Taking Into Account Valid Rules and Practices Applied in Europe and Poland

    Directory of Open Access Journals (Sweden)

    Marian Sobierajski

    2014-12-01

    Full Text Available Connection of microgenerators to a low voltage network affects the electrical energy quality. In the paper, the basic relationships have been set out to compute voltage deviations and fluctuations. The basic criteria of microgeneration connection to a low voltage network have been given. The valid rules and practices applied in Europe and Poland have been described.

  15. Annual and Semiannual Cycles Based on the Middle Atmosphere Reference Model

    Science.gov (United States)

    Barnett, J. J.; Corney, M.; Labitzke, K.

    1985-01-01

    The SCR/PMR monthly temperature mean values were Fourier analysed at each latitude and pressure level to obtain the annual mean and the amplitude and phase of the annual and semiannual cycles. The phase is the month of the maximum, such that 1 = January 1, 1.5 = January 16, 2 = February 1, etc. Some very marked hemispheric differences noted are: (1) at 80 N there is a maximum amplitude of the annual cycle of 26 K at 2.5 mb, the corresponding maximum at 80 S is much stronger (35 K) and at a lower altitude (11 mb); (2) the semiannual amplitudes show the well known maximum over the tropics in the upper stratosphere, but also maxima at high latitudes; and (3) the annual mean shows a minimum at 50 S, 1 mb, and a corresponding weaker minimum at 60 N. In general, the hemispheres are remarkably similar and six months out of phase above about 0.3 mb (56 km). The two hemispheres are significantly different especially in winter after allowing for a six month shift. Changes rom summer to winter are so large by comparison that the annual cycles appear to be very similar.

  16. Twenty-fifth Semiannual Report of the Commission to the Congress, January 1959. Atomic Industrial Process and Second World Conference, July - December 1958

    Energy Technology Data Exchange (ETDEWEB)

    McCone, John A.

    1959-01-31

    The document represents the twenty-fifth semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up the major activities and developments in the national atomic energy program in Part Three, covering the period July - December 1958. A special Part One of this semiannual report is titled ''Industrial Atomic Progress During 1958", and a Part Two entitled "Second World Conference on Peaceful Uses of Atomic Energy".

  17. Wireless networked music performance

    CERN Document Server

    Gabrielli, Leonardo

    2016-01-01

    This book presents a comprehensive overview of the state of the art in Networked Music Performance (NMP) and a historical survey of computer music networking. It introduces current technical trends in NMP and technical issues yet to be addressed. It also lists wireless communication protocols and compares these to the requirements of NMP. Practical use cases and advancements are also discussed.

  18. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience At the end of the first full-year running period of LHC, CMS is established as a reliable, robust and mature experiment. In particular common systems and infrastructure faults accounted for <0.6 % CMS downtime during LHC pp physics. Technical operation throughout the entire year was rather smooth, the main faults requiring UXC access being sub-detector power systems and rack-cooling turbines. All such problems were corrected during scheduled technical stops, in the shadow of tunnel access needed by the LHC, or in negotiated accesses or access extensions. Nevertheless, the number of necessary accesses to the UXC averaged more than one per week and the technical stops were inevitably packed with work packages, typically 30 being executed within a few days, placing a high load on the coordination and area management teams. It is an appropriate moment for CMS Technical Coordination to thank all those in many CERN departments and in the Collaboration, who were involved in CMS techni...

  19. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    2010-01-01

    Operational Experience Since the closure of the detector in February, the technical operation of CMS has been quite smooth and reliable. Some minor interventions in UXC were required to cure failures of power supplies, fans, readout boards and rack cooling connections, but all these failures were repaired in scheduled technical stops or parasitically during access dedicated to fixing LHC technical problems. The only occasion when CMS had to request an access between fills was to search for the source of an alarm from the leak-detection cables mounted in the DT racks. After a few minutes of diagnostic search, a leaking air-purge was found. Replacement was complete within 2 hours. This incident demonstrated once more the value of these leak detection cables; the system will be further extended (during the end of year technical stop) to cover more racks in UXC and the floor beneath the detector. The magnet has also been operating reliably and reacted correctly to the 14s power cut on 29 May (see below). In or...

  20. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Monday 9 February 2004 From 10:00 to 12:00 - IT Auditorium - bldg. 31, 3rd floor ANSOFT High-Frequency Seminar David Prestaux, Application Engineer, ANSOFT F-78535 BUC, France This Technical Training seminar will present two Ansoft application products: Ansoft HFSS and Ansoft Designer. Ansoft HFSS makes use of the Finite Element Method (FEM) to calculate field solutions from first principles. It can accurately predict all high-frequency behaviours such as dispersion, mode conversion, and losses due to materials and radiation. Ansoft Designer is a suite of design tools to fully integrate high-frequency, physics-based electromagnetic simulations into a seamless system-level simulation environment. Ansoft Designer uses a simple interface to give complete control over every design task, by a method allowing multiple solvers, Solver on Demand. • Introduction • Overview of the Ansoft Total solution • Ansoft HFSS 9...

  1. Hydrocarbon exploration in Zimbabwe. Example for network between science, technical cooperation and economy. Kohlenwasserstoff-Exploration in Simbabwe. Beispiel fuer eine Vernetzung von Wissenschaft, Technischer Zusammenarbeit und Wirtschaft

    Energy Technology Data Exchange (ETDEWEB)

    Hiller, K. (Bundesanstalt fuer Geowissenschaften und Rohstoffe, Hannover (Germany)); Wellmer, F.W. (Bundesanstalt fuer Geowissenschaften und Rohstoffe, Hannover (Germany))

    1994-01-01

    Taking the hydrocarbon exploration project in Zimbabwe as an example, it is shown how technical cooperation (TC) projects and commercial exploration (Mobil Oil in the Zambezi Valley) can be initiated as a result of the interaction of the BGR's own research, cooperation with the Geological Survey of Zimbabwe and know-how transfer. The early activities comprised acquisition and interpretation of radiometric and aeromagnetic surveys (German industry/BGR/BMFT (research)/TC project) and sedimentological investigations (BGR TC project). A regional hydrocarbon prospectivity study and a magnetotelluric survey followed (both BGR TC projects). These activities initiated the commercial hydrocarbon exploration which is accompanied by a BGR TC project (technical third party opinion, government consultancy) including investigations of potential source rocks in other Karoo basins. (orig.)

  2. Understanding Socio Technical Modularity

    DEFF Research Database (Denmark)

    Thuesen, Christian Langhoff; Kudsk, Anders; Hvam, Lars

    2011-01-01

    Modularity has gained an increasing popularity as a central concept for exploring product structure, process structure, organization structure and supply chain structure. With the offset in system theory the predominant understanding of modularity however faces difficulties in explaining the social...... Theory in particular. By formulating modularity from an ANT perspective covering social, material and process aspects, the modularity of a socio-technical system can be understood as an entanglement of product, process, organizational and institutional modularity. The theoretical framework is illustrated...... dimension of modularity like irrational behaviors, cultural differences, learning processes, social organization and institutional influences on modularity. The paper addresses this gab offering a reinterpretation of the modularity concept from a socio-technical perspective in general and Actor Network...

  3. ARPA/NRL X-Ray Laser Program - Semiannual Technical Report to Defense Advanced Research Projects Agency

    Science.gov (United States)

    1975-03-01

    atoms. In the highly constricted plasma region, the current density reaches a value of lO10 amps •cm-2. However, the physical pro- cesses involved in...multiplied by the photoionizatlon cross sectionspl, gives the photoionizatlon coefficient a , i.e., -20 V ~ 10 No for a rather apical value [96

  4. Semiannual Technical Summary, 1 October 1990 - 31 March 1991 (Royal Norwegian Council for Scientific and Industrial Research)

    Science.gov (United States)

    1991-05-01

    problemiatij iit il rece it Iy die to lrit at ions m iposed by cirrent ly availabIle cornpters. ’This beinrg said, we will repiort bel ow on 2...5 kin/sI. Oil the otliec hand. -’veiits with lci agat 1)1 plaths crossing the North Soa grabeni struct ures (v’I !’r ev-f-’t original i og in oceanic

  5. Mid-south solar total energy institutional analysis. Semi-annual technical progress report, December 1978-May 1979

    Energy Technology Data Exchange (ETDEWEB)

    Powe, R.E.; Carley, C.T.; Forbes, R.E.; Johnson, L.R.

    1979-07-31

    During this reporting period a variety of individual components likely to be employed in total energy systems at Mississippi State University have been considered in detail. Also, algorithms have been developed for the approximate prediction of building heating and cooling loads based on gross parameters such as floor area, type of wall construction, etc. A comprehensive survey was undertaken to determine the current usage of energy by the university and correlation equations were used to project consumption rates for the next few years. The development of an algorithm for heating and cooling load calculations is described. Design and specifications are given for a solar-assisted space heating system, a solar air conditioning system, and a 1-MWe solar thermal power plant for the university. Flat-plate collectors for space heating or water heating at the MSU campus are assessed. Also the possibility of exploiting low-grade geothermal energy near MSU using heat pumps for space heating is discussed.

  6. GPHS-RTGs in support of the Cassini Mission. Semiannual technical progress report, 27 September 1993--27 March 1994

    Energy Technology Data Exchange (ETDEWEB)

    1994-04-24

    This report is organized by the program task structure as follows: (1) spacecraft integration and liaison; (2) engineering support; (3) safety; (4) qualified unicouple fabrication; (5) ETG fabrication, assembly, and test; (6) ground support equipment (GSE); (7) RTG shipping and launch support; (8) designs, reviews, and mission applications; (9) project management, quality assurance and reliability, contract changes, non-capital CAGO acquisition, and CAGO maintenance; and (H) contractor acquired government owned property (CAGO) acquisition.

  7. The Consortium for Plant Biotechnology Research, Inc. Semi-Annual Technical Report for April 1, 2000 - September 30, 2000

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-10-02

    Scientific progress reports submitted by university researchers conducting projects funded through CPBR and metrics reports submitted by industry sponsors that provided matching funds to the projects.

  8. Cast polycrystalline silicon photovoltaic module manufacturing technology improvements. Semiannual technical report, 1 January 1996--30 June 1996

    Energy Technology Data Exchange (ETDEWEB)

    Wohlgemuth, J [Solarex Corp., Frederick, MD (United States)

    1997-01-01

    Two specific objectives of Solarex`s program are to reduce the manufacturing cost for polycrystalline silicon photovoltaic modules to less than $1.20/watt and to increase the manufacturing capacity by a factor of three. This report highlights accomplishments during the period of January 1 through June 30, 1996. Accomplishments include: began the conversion of production casting stations to increase ingot size; operated the wire saw in a production mode with higher yields and lower costs than achieved on the ID saws; developed and qualified a new wire guide coating material that doubles the wire guide lifetime and produces significantly less scatter in wafer thickness; completed a third pilot run of the cost-effective Al paste back-surface-field (BSF) process, verifying a 5% increase in cell efficiency and demonstrating the ability to process and handle the BSF paste cells; completed environmental qualification of modules using cells produced by an all-print metallization process; optimized the design of the 15.2-cm by 15.2-cm polycrystalline silicon solar cells; demonstrated the application of a high-efficiency process in making 15.2-cm by 15.2-cm solar cells; demonstrated that cell efficiency increases with decreasing wafer thickness for the Al paste BSF cells; qualified a vendor-supplied Tedlar/ethylene vinyl acetate (EVA) laminate to replace the combination of separate sheets of EVA and Tedlar backsheet; demonstrated the operation of a prototype unit to trim/lead attach/test modules; and demonstrated the operation of a wafer pull-down system for cassetting wet wafers.

  9. TADS: Technical Assistance Development System.

    Science.gov (United States)

    Epting, Rosemary, Ed.

    Described is the Technical Assistance Development System (TADS), a component of the Frank Porter Graham Child Development Center of the University of North Carolina at Chapel Hill which offers support services to preschool demonstration centers for handicapped children in the First Chance Network. Discussed are the four types of services offered:…

  10. Gigabit Ethernet: A Technical Assessment.

    Science.gov (United States)

    Axner, David

    1997-01-01

    Describes gigabit ethernet for LAN (local area network) technology that will expand ethernet bandwidth. Technical details are discussed, including protocol stacks, optical fiber, deployment strategy for performance improvement, ATM (Asynchronous Transfer Mode), real-time protocol, reserve reservation protocol, and standards. (LRW)

  11. Semi-annual report of the Department of Energy, Office of Environmental Management, Quality Assessment Program

    Energy Technology Data Exchange (ETDEWEB)

    Sanderson, C.G.; Greenlaw, P.

    1996-02-01

    This report presents the results from the analysis of the 43rd set of environmental quality assessment samples (QAP XLIII) that were received on or before December 1, 1995. This Quality Assessment Program (QAP) is designed to test the quality of the environmental measurements being reported to the Department of Energy by its contractors. Since 1976, real or synthetic environmental samples that have been prepared and thoroughly analyzed at the Environmental Measurements Laboratory (EML) have been distributed at first quarterly and then semi-annually to these contractors. Their results, which are returned to EML within 90 days, are compiled with EML`s results and are reported back to the participating contractors 30 days later. A summary of the reported results is available to the participants 2 days after the reporting deadline via a modem-telephone connection to the EML computer.

  12. Semi-annual report of the Department of Energy, Office of Environmental Management, Quality Assessment Program

    Energy Technology Data Exchange (ETDEWEB)

    Greenlaw, P.D.

    1998-01-01

    This Quality Assessment Program (QAP) is designed to test the quality of the environmental measurements being reported to the Department of Energy by its contractors. Since 1976, real or synthetic environmental samples that have been prepared and thoroughly analyzed at the Environmental Measurements Laboratory (EML) have been distributed at first quarterly and then semi-annually to these contractors. Their results, which are returned to EML within 90 days, are compiled with EML`s results and are reported back to the participating contractors 30 days later. A summary of the reported results is available to the participants 4 days after the reporting deadline via the Internet at www.eml.doe.gov. This report presents the results from the analysis of the 47th set of environmental quality assessment samples (QAP XLVII) that were received on or before December 1, 1997.

  13. Office of Inspector General semiannual report to Congress, April 1--September 30, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    This Office of Inspector General Semiannual Report to the Congress covers the period from April 1 through September 30, 1995. The report summarizes significant audit, inspection, and investigative accomplishments for the reporting period, a large portion of which facilitated Department of Energy management efforts to improve management controls and ensure efficient and effective operation of its programs. Narratives of the most significant reports are grouped by six primary performance measures which the Office of Inspector General uses to gauge its attainment of the outcomes established in the Office of Inspector General Strategic Plan. The common thread that ties the performance measures together is their emphasis on supporting Department efforts to produce high quality products at the lowest possible cost to the taxpayer. The six performance measures present outcomes of Office of Inspector General work in terms of improvements in Department programs and operations.

  14. Office of Inspector General semiannual report to Congress, October 1, 1997--March 31, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-04-01

    This Office of Inspector General (OIG) Semiannual Report to the Congress covers the period from October 1, 1997, through March 31, 1998. The report summarizes significant audit, inspection, and investigative accomplishments for the reporting period that facilitated Department of Energy (Department) efforts to improve management controls and ensure efficient and effective operation of its programs. This report highlights OIG accomplishments in support of its Strategic Plan. Narratives of the Office`s most significant reports are grouped by the strategic goals against which the OIG measures its performance. To put the OIG accomplishments for this reporting period in context, the following statistical information is provided: audit and inspection reports issued -- 47; recommendations that funds be put to better use -- $356,257,856; management commitment to taking corrective actions -- $289,106,445; criminal indictments/convictions -- 8; fines and recoveries -- $1,612,932; and investigative reports to management recommending positive change -- 21.

  15. Annual and semiannual variations in the ionospheric F2-layer: II. Physical discussion

    Directory of Open Access Journals (Sweden)

    H. Rishbeth

    2000-08-01

    Full Text Available The companion paper by Zou et al. shows that the annual and semiannual variations in the peak F2-layer electron density (NmF2 at midlatitudes can be reproduced by a coupled thermosphere-ionosphere computational model (CTIP, without recourse to external influences such as the solar wind, or waves and tides originating in the lower atmosphere. The present work discusses the physics in greater detail. It shows that noon NmF2 is closely related to the ambient atomic/molecular concentration ratio, and suggests that the variations of NmF2 with geographic and magnetic longitude are largely due to the geometry of the auroral ovals. It also concludes that electric fields play no important part in the dynamics of the midlatitude thermosphere. Our modelling leads to the following picture of the global three-dimensional thermospheric circulation which, as envisaged by Duncan, is the key to explaining the F2-layer variations. At solstice, the almost continuous solar input at high summer latitudes drives a prevailing summer-to-winter wind, with upwelling at low latitudes and throughout most of the summer hemisphere, and a zone of downwelling in the winter hemisphere, just equatorward of the auroral oval. These motions affect thermospheric composition more than do the alternating day/night (up-and-down motions at equinox. As a result, the thermosphere as a whole is more molecular at solstice than at equinox. Taken in conjunction with the well-known relation of F2-layer electron density to the atomic/molecular ratio in the neutral air, this explains the F2-layer semiannual effect in NmF2 that prevails at low and middle latitudes. At higher midlatitudes, the seasonal behaviour depends on the geographic latitude of the winter downwelling zone, though the effect of the composition changes is modified by the large solar zenith angle at midwinter. The zenith angle effect is especially important in longitudes far from the magnetic poles. Here, the downwelling occurs

  16. NNWSI waste from testing at Argonne National Laboratory. Semiannual report, July-December 1985

    Energy Technology Data Exchange (ETDEWEB)

    Bates, J.K.; Gerding, T.J.; Abrajano, T.A. Jr.; Ebert, W.

    1986-03-01

    The Nevada Nuclear Waste Storage Investigations (NNWSI) Project is investigating the volcanic tuff beds of Yucca Mountain, Nevada, as a potential location for a high-level radioactive waste repository. As part of the waste package development portion of this project, experiments are being performed by the Chemical Technology Division of Argonne National Laboratory to study the behavior of the waste forms under anticipated repository conditions. These experiments include (1) the development and performance of a test to measure waste form behavior in unsaturated conditions and (2) the performance of tests designed to study the behavior of waste package components in an irradiated environment. Previous reports document developments in these areas through 1984. This report summarizes progress in 1985. Reports will be issued semi-annually hereafter.

  17. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball

    Overview From a technical perspective, CMS has been in “beam operation” state since 6th November. The detector is fully closed with all components operational and the magnetic field is normally at the nominal 3.8T. The UXC cavern is normally closed with the radiation veto set. Access to UXC is now only possible during downtimes of LHC. Such accesses must be carefully planned, documented and carried out in agreement with CMS Technical Coordination, Experimental Area Management, LHC programme coordination and the CCC. Material flow in and out of UXC is now strictly controlled. Access to USC remains possible at any time, although, for safety reasons, it is necessary to register with the shift crew in the control room before going down.It is obligatory for all material leaving UXC to pass through the underground buffer zone for RP scanning, database entry and appropriate labeling for traceability. Technical coordination (notably Stephane Bally and Christoph Schaefer), the shift crew and run ...

  18. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

    In this report we will review the main achievements of the Technical Stop and the progress of several centrally-managed projects to support CMS operation and maintenance and prepare the way for upgrades. Overview of the extended Technical Stop  The principal objectives of the extended Technical Stop affecting the detector itself were the installation of the TOTEM T1 telescopes on both ends, the readjustment of the alignment link-disk in YE-2, the replacement of the light-guide sleeves for all PMs of both HFs, and some repairs on TOTEM T2 and CASTOR. The most significant tasks were, however, concentrated on the supporting infrastructure. A detailed line-by-line leak search was performed in the C6F14 cooling system of the Tracker, followed by the installation of variable-frequency drives on the pump motors of the SS1 and SS2 tracker cooling plants to reduce pressure transients during start-up. In the electrical system, larger harmonic filters were installed in ...

  19. Mean winds and the semiannual oscillation in the mesosphere and lower thermosphere at Christmas Island

    Science.gov (United States)

    Palo, S. E.; Avery, S. K.

    1993-11-01

    In this paper we analyze mesospheric wind data collected from August 1988 to November 1989 and January 1991 to December 1991 at Christmas Island (1.95°N, 157.30°W) using the Meteor Echo Detection and Collection system. A brief overview of the data analysis techniques used on these data sets and meteor arrival statistics are presented. The mean winds are computed for 80 to 100 km and compared with the CIRA(86) model of mesospheric equatorial mean winds. Examination of the zonal mean winds and a Fourier decomposition of the zonal wind field shows a strong semiannual oscillation (SAO). To determine the vertical characteristics of the zonal SAO, a least squares fit was computed at each height. The results show a semiannual oscillation that peaks in amplitude at 84 km and decreases with increasing height. The SAO at Christmas Island is compared with data collected at Ascension Island and Kwajalein Island and with the CIRA(86) model. This comparison shows good phase agreement between the sites and some variability in the amplitudes. To fully understand the SAO in the context of the theory presented by Delisi and Dunkerton (1988), the tropospheric mean winds and wind variances are computed to determine the extent of tropospheric gravity wave activity present. Finally, the amplitude and phase of the SAO in temperature are computed indirectly from the Christmas Island wind data and compared to temperature results from SME data. Our results show reasonable agreement below 87 km and a divergence in amplitude near 90 km. One probable reason for this difference is contamination of the SME data from the diurnal tide as noted by Garcia and Clancy (1990).

  20. Initial performance of a modified milestones global evaluation tool for semiannual evaluation of residents by faculty.

    Science.gov (United States)

    Borman, Karen R; Augustine, Rebecca; Leibrandt, Thomas; Pezzi, Christopher M; Kukora, John S

    2013-01-01

    To determine whether faculty could successfully evaluate residents using a competency-based modified Milestones global evaluation tool. A program's leadership team modified a draft Surgery Milestones Working Group summative global assessment instrument into a modified Milestones tool (MMT) for local use during faculty meetings devoted to semiannual resident review. Residents were scored on 15 items spanning all competencies using an 8-point graphic response scale; unstructured comments also were solicited. Arithmetic means were computed at the resident and postgraduate year cohort levels for items and competency item sets. Score ranges (highest minus lowest score) were calculated; variability was termed "low" (range 2.0). A subset of "low" was designated "small" (1.0-1.9). Trends were sought among item, competency, and total Milestones scores. MMT correlations with examination scores and multisource (360°) assessments were explored. The success of implementing MMT was judged using published criteria for educational assessment methods. Fully accredited, independently sponsored residency. Program leaders and 22 faculty members (71% voluntary, mean 12y of experience). Twenty-six residents were assessed, yielding 7 to 13 evaluations for MMT per categorical resident and 3 to 6 per preliminary trainee. Scores spanned the entire response scale. All MMT evaluations included narrative comments. Individual resident score variability was low (96% within competencies and 92% across competencies). Subset analysis showed that small variations were common (35% within competencies and 54% across competencies). Postgraduate year cohort variability was higher (61% moderate or high within competencies and 50% across competencies). Cohort scores at the item, competency, and total score levels exhibited rising trajectories, suggesting MMT construct validity. MMT scores did not demonstrate concurrent validity, correlating poorly with other metrics. The MMT met multiple criteria for

  1. Momentum in Transformation of Technical Infrastructure

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev; Elle, Morten

    1999-01-01

    Current infrastructure holds a considerable momentum and this momentum is a barrier of transformation towards more sustainable technologies and more sustainable styles of network management. Using the sewage sector in Denmark as an example of a technical infrastructure system this paper argues...... that there are technical, economical and social aspects of the current infrastructures momentum....

  2. Predictions of academic achievements of vocational and technical high school students with artificial neural networks in science courses (physics, chemistry and biology in Turkey and measures to be taken for their failures

    Directory of Open Access Journals (Sweden)

    Yağcı Ali

    2017-01-01

    Full Text Available The aim of this study is to predict academic achievements of vocational and technical high school (VTHS students with artificial neural networks (ANN in physics, chemistry and biology courses in Turkey and reveal measures to be taken for their failures. The study group consisted of 922 students studying in 10th and 11th grade in VTHS. This study was conducted with the survey method and a 34-item demographic questionnaire was developed in order to collect the data. The parameters in the questionnaire were identified as the items that were considered to influence academic achievements of the students. Opinions of 3 field specialist, 1 measurement and evaluation specialist and 2 technical teachers were taken and it was supported by the literature for the content validity and the KR20 reliability coefficient was found as .90 using SPSS 16.0 package program. The items in the questionnaire that are considered to influence academic achievements of the students were approved as independent variables/input and academic achievement mean scores of the students in physics, chemistry and biology courses in the previous year were approved as dependent variables/output. Academic achievements of the student were predicted with ANN in Matlap R2016a program using these parameters and a model was created. A successful academic achievement prediction system with an average sensitivity of %98 was developed over 922 data and the measures to be taken to prevent the failures of the students were determined at the end of the study.

  3. Environmental restoration/waste management-applied technology semiannual report, January--June 1992. Volume 1, No. 1

    Energy Technology Data Exchange (ETDEWEB)

    Adamson, M.; Kline-Simon, K. [eds.

    1992-12-31

    This is the first issue from the Lawrence Livermore National Laboratory of The Environmental Restoration/Waste Management-Applied Technology (ER/WM-AT) Semiannual Report, a continuation of the Advanced Processing Technology (APT) Semiannual Report. The name change reflects the consolidation of the APT Program with the Environmental Restoration and Waste Management Program to form the Environmental Restoration/Waste Management-Applied Technology (ER/WM-AT) Program. The Livermore site mirrors, on a small scale, many of the environmental and waste management problems of the DOE Complex. The six articles in this issue cover incineration- alternative technologies, process development for waste minimization, the proposed Mixed Waste Management Facility, dynamic underground stripping, electrical resistance tomography, and Raman spectroscopy for remote characterization of underground tanks.

  4. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Switzerland (please sp...

  5. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    Tuesday 30 March TECHNICAL TRAINING SEMINAR From 9:00 to 12:00 and from 13:00 to 16:00 hrs - Council Chamber, Salle B, Salle des Pas Perdus National Instruments (NI) on Tour 2004 Claudia Jüngel, Evrem Yarkin, Joel Clerc, Hervé Baour / NATIONAL INSTRUMENTS The special event NI on Tour 2004, run in Germany, Austria and Switzerland, will be at CERN on March 30. Technical seminars and free introductory courses will be offered all day long in the Council Chamber, Salle B, and Salle des Pas Perdus (buildings 61 and 503). Technical conferences: 09:00 - 12:00 Data acquisition systems on PCs. Industrial measurement and control techniques. 13:00 - 16:00 Advanced LabVIEW software and PXI instrumentation. Measuring instruments and system components for teststand automation. Introductory courses: 09:00 - 12:00 DIAdem: Data analysis and presentation 13:00 - 16:00 Data acquisition with LabVIEW Language: English and French Free special seminar. Registration is recommended with National Instruments Swi...

  6. Technical Note: Harmonized retrieval of column-integrated atmospheric water vapor from the FTIR network - First examples for long-term records and station trends

    OpenAIRE

    Sussmann, R.; T. Borsdorff; M. Rettinger; Camy-Peyret, C.; Demoulin, P.; Duchatelet, P.; Mahieu, E.; Servais, C.

    2009-01-01

    We present a method for harmonized retrieval of integrated water vapor (IWV) from existing, long-term, measurement records at the ground-based mid-infrared solar FTIR spectrometry stations of the Network for the Detection of Atmospheric Composition Change (NDACC). Correlation of IWV from FTIR with radiosondes shows an ideal slope of 1.00(3). This optimum matching is achieved via tuning one FTIR retrieval parameter, i.e., the strength of a Tikhonov regularization constraining...

  7. Co-ordination of the International Network of Nuclear Structure and Decay Data Evaluators; Summary Report of an IAEA Technical Meeting

    Energy Technology Data Exchange (ETDEWEB)

    Abriola, D.; Tuli, J.

    2009-03-23

    The IAEA Nuclear Data Section convened the 18th meeting of the International Network of Nuclear Structure and Decay Data Evaluators at the IAEA Headquarters, Vienna, 23 to 27 March 2009. This meeting was attended by 22 scientists from 14 Member States, plus IAEA staff, concerned with the compilation, evaluation and dissemination of nuclear structure and decay data. A summary of the meeting, recommendations/conclusions, data centre reports, and various proposals considered, modified and agreed by the participants are contained within this document. The International Network of Nuclear Structure and Decay Data (NSDD) Evaluators holds biennial meetings under the auspices of the IAEA, and consists of evaluation groups and data service centres in several countries. This network has the objective of providing up-to-date nuclear structure and decay data for all known nuclides by evaluating all existing experimental data. Data resulting from this international evaluation collaboration is included in the Evaluated Nuclear Structure Data File (ENSDF) and published in the journals Nuclear Physics A and Nuclear Data Sheets (NDS).

  8. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2013-01-01

    For the reporting period, the CMS common systems and infrastructure worked well, without failures that caused significant data losses. One more disconnection of the magnet cold box occurred in the shadow of interruptions in data taking, caused by a series of technical faults. The recognition during 2012 that re-connection can only safely be done at around 2 T implies a minimum magnet recovery time of 12 hours and raises serious concerns about the number of ramping cycles of the magnet these incidents cause. This has triggered studies of how to make the cryo-system of the magnet more robust against failures. The proton-proton run ended just before the end-of-year CERN closure, during which CASTOR was installed on the negative end of CMS and both ZDC calorimeters were installed in TAN absorbers the LHC tunnel, in preparation for the heavy-ion run. The installation of CASTOR was an excellent “engineering test” of procedures for working in an activated environment. Despite some technical pr...

  9. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2011-01-01

      Operational experience 2011 CMS is approaching the end of a very successful year of operation. Proton- proton running ended in the late afternoon of 30th October with a stunning 5.73 fb–1 delivered by LHC, of which CMS recorded 5.22 fb–1. During heavy-ion operation, which continues until 7th December, both the accelerator and the CMS detector have also performed very well. Despite the encouraging overall reliability of technical operation, several infrastructure failures which occurred since the last Bulletin are worthy of mention, with one leading for the first time to significant data-loss. On 10th July, a CERN-wide power failure brought down essentially all services including the magnet, due to an MCS setting being left in “manual” after the recent technical stop, but there was no significant damage and the detector was operational before the LHC, despite a slow and tortuous recovery (one of several indications this year that there is room for improve...

  10. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    Summary of progress since last CMS week. Ten years of construction work have been completed. CMS is closed, in very close to the ideal low luminosity configuration, and performed well in the first tests with LHC beam. Behind this encouraging news is the story of a summer of intense commitment by many teams (from the collaboration and 3 CERN departments) working together, against the clock and despite many minor setbacks, to ensure that the experiment was ready to play a leading role in the excitement of September 10. Following beampipe bakeout and refill with pure neon, a magnificent effort by the ECAL group and the pt 5 technical crew made it possible to install and commission all 4 ECAL endcap Dees before the end of August. In the shadow of this activity, the barrel and forward pixel trackers and part of the beam monitoring were installed within the vac tank. The pt 5 technical teams then succeeded in safely removing the 20t installation tables and their support blocks from beneath the already installed ...

  11. Networks Technology Conference

    Science.gov (United States)

    Tasaki, Keiji K. (Editor)

    1993-01-01

    The papers included in these proceedings represent the most interesting and current topics being pursued by personnel at GSFC's Networks Division and supporting contractors involved in Space, Ground, and Deep Space Network (DSN) technical work. Although 29 papers are represented in the proceedings, only 12 were presented at the conference because of space and time limitations. The proceedings are organized according to five principal technical areas of interest to the Networks Division: Project Management; Network Operations; Network Control, Scheduling, and Monitoring; Modeling and Simulation; and Telecommunications Engineering.

  12. Technical note: The US Dobson station network data record prior to 2015, re-evaluation of NDACC and WOUDC archived records with WinDobson processing software

    Science.gov (United States)

    Evans, Robert D.; Petropavlovskikh, Irina; McClure-Begley, Audra; McConville, Glen; Quincy, Dorothy; Miyagawa, Koji

    2017-10-01

    The United States government has operated Dobson ozone spectrophotometers at various sites, starting during the International Geophysical Year (1 July 1957 to 31 December 1958). A network of stations for long-term monitoring of the total column content (thickness of the ozone layer) of the atmosphere was established in the early 1960s and eventually grew to 16 stations, 14 of which are still operational and submit data to the United States of America's National Oceanic and Atmospheric Administration (NOAA). Seven of these sites are also part of the Network for the Detection of Atmospheric Composition Change (NDACC), an organization that maintains its own data archive. Due to recent changes in data processing software the entire dataset was re-evaluated for possible changes. To evaluate and minimize potential changes caused by the new processing software, the reprocessed data record was compared to the original data record archived in the World Ozone and UV Data Center (WOUDC) in Toronto, Canada. The history of the observations at the individual stations, the instruments used for the NOAA network monitoring at the station, the method for reducing zenith-sky observations to total ozone, and calibration procedures were re-evaluated using data quality control tools built into the new software. At the completion of the evaluation, the new datasets are to be published as an update to the WOUDC and NDACC archives, and the entire dataset is to be made available to the scientific community. The procedure for reprocessing Dobson data and the results of the reanalysis on the archived record are presented in this paper. A summary of historical changes to 14 station records is also provided.

  13. The development of coal-based technologies for Department of Defense facilities. Volume 1, Technical report. Semiannual technical progress report, September 28, 1994--March 27, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Bartley, D.A.; Hatcher, P. [Pennsylvania State Univ., University Park, PA (United States). Energy and Fuels Research Center] [and others

    1996-10-15

    This program is being conducted as a cooperative agreement between the Consortium for Coal Water Mixture Technology and the U.S. Department of Energy. Activities this reporting period are summarized by phase. Phase I is nearly completed. During this reporting period, coal beneficiation/preparation studies, engineering designs and economics for retrofitting the Crane, Indiana boiler to fire coal-based fuels, and a 1,000-hour demonstration of dry, micronized coal were completed. In addition, a demonstration-scale micronized-coal water mixture (MCWM) preparation circuit was constructed and a 1,000-hour demonstration firing MCWM began. Work in Phase II focused on emissions reductions, coal beneficiation/preparation studies, and economic analyses of coal use. Emissions reductions investigations involved literature surveys of NO{sub x}, SO{sub 2}, trace metals, volatile organic compounds, and fine particulate matter capture. In addition, vendors and engineering firms were contacted to identify the appropriate emissions technologies for the installation of commercial NO{sub x} and SO{sub 2} removal systems on the demonstration boiler. Information from the literature surveys and engineering firms will be used to identify, design, and install a control system(s). Work continued on the refinement and optimization of coal grinding and MCWM preparation procedures, and on the development of advanced processes for beneficiating high ash, high sulfur coals. Work also continued on determining the basic cost estimation of boiler retrofits, and evaluating environmental, regulatory, and regional economic impacts. In addition, the feasibility of technology adoption, and the public`s perception of the benefits and costs of coal usage was studied. A coal market analysis was completed. Work in Phase III focused on coal preparation studies, emissions reductions and economic analyses of coal use.

  14. Technical presentation

    CERN Multimedia

    FP Department

    2009-01-01

    07 April 2009 Technical presentation by Leuze Electronics: 14.00 – 15.00, Main Building, Room 61-1-017 (Room A) Photoelectric sensors, data identification and transmission systems, image processing systems. We at Leuze Electronics are "the sensor people": we have been specialising in optoelectronic sensors and safety technology for accident prevention for over 40 years. Our dedicated staff are all highly customer oriented. Customers of Leuze Electronics can always rely on one thing – on us! •\tFounded in 1963 •\t740 employees •\t115 MEUR turnover •\t20 subsidiaries •\t3 production facilities in southern Germany Product groups: •\tPhotoelectric sensors •\tIdentification and measurements •\tSafety devices

  15. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2010-01-01

    Overview Once again, the bulk of this article reviews the intense activity of a recently completed shutdown, which, although quite unforeseeable until a few weeks before it started, proved by its success that our often advertised capability to conduct major maintenance within a two month period is real. Although safely completed, on-time to remarkable precision, the activity was not without incident, and highlighted our dependence on many experienced, specialist teams and their precise choreography. Even after the yoke was safely closed, magnet re-commissioning and beampipe pumpdown showed new and thought-provoking behaviour. The struggle to maintain adequate technical resources will be a pre-occupation over the coming months, in parallel with the start of truly sustained operation, for which various procedures are still being put in place. Planning for future shutdowns must now become a high priority, with many working groups and task forces already in existence to prepare infrastructure improvements and to...

  16. Technical presentation

    CERN Multimedia

    FI Department

    2008-01-01

    RADIOSPARES, the leading catalogue distributor of components (electronic, electrical, automation, etc.) and industrial supplies will be at CERN on Friday 3 October 2008 (Main Building, Room B, from 9.00 a.m. to 3.00 p.m.) to introduce its new 2008/2009 catalogue. This will be the opportunity for us to present our complete range of products in more detail: 400 000 part numbers available on our web site (Radiospares France, RS International, extended range of components from other manufacturers); our new services: quotations, search for products not included in the catalogue, SBP products (Small Batch Production: packaging in quantities adapted to customers’ requirements); partnership with our focus manufacturers; demonstration of the on-line purchasing tool implemented on our web site in conjunction with CERN. RADIOSPARES will be accompanied by representatives of FLUKE and TYCO ELECTRONICS, who will make presentations, demonstrate materials and answer any technical questio...

  17. Technical presentation

    CERN Multimedia

    GS Department

    2010-01-01

    10 March 2010 DYNEOS 10:00 – 12:00 - Main Building, Room B, 61-1-009 Dyneos AG is active in the fields of photonics, laser and high-precision positioning. Our highly qualified engineer team has more than 30 years of experience in electro-optical solutions sales. The engineers are supported by a technical and administrative team. We are focused on the Swiss market and represent six suppliers (Coherent, PI Physik Instrumente, SIOS, Nanonics Imaging, APE, Ekspla) in order to give a qualified sales and service support to our customers. Our products are dedicated to the research field as well as to industry. In addition to standard catalog products, we offer custom designs to fulfill the specific needs of OEM customers or specific applications.

  18. Technical Training: Technical Training Seminar

    CERN Multimedia

    2004-01-01

    TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch Tuesday 3 February 2004 From 09:00 to 13:30 - Training Centre Auditorium - bldg. 593, room 11 USB (Universal Serial Bus) CYPRESS Seminar Claudia Colombini, Field Application Engineer CYPRESS ActiveComp Electronic GmbH D-85077 MANCHING, Germany As a pioneer in USB, CYPRESS sets the standard for cost-effective solutions without sacrificing functionality, performance or reliability. Having shipped over 200 million USB devices, Cypress is the undisputed market leader and demonstrates unmatched USB expertise. With the industry's broadest selection of USB solutions, Cypress has the right silicon, software and support for every USB application, from Low-speed to High-Speed and USB On-The-Go (OTG). 9:00 - 10:30 Overview of USB systems. USB CYPRESS product overview. Peripherals: Low Speed, Full Speed, High Speed (1.1 and 2.0). Hub Solutions, Embedded Host Solutions, On-The-Go (OTG) and wireless USB. USB Development Tools (first part) 10:30 -...

  19. Networking for big data

    CERN Document Server

    Yu, Shui; Misic, Jelena; Shen, Xuemin (Sherman)

    2015-01-01

    Networking for Big Data supplies an unprecedented look at cutting-edge research on the networking and communication aspects of Big Data. Starting with a comprehensive introduction to Big Data and its networking issues, it offers deep technical coverage of both theory and applications.The book is divided into four sections: introduction to Big Data, networking theory and design for Big Data, networking security for Big Data, and platforms and systems for Big Data applications. Focusing on key networking issues in Big Data, the book explains network design and implementation for Big Data. It exa

  20. TECHNICAL COORDINATION

    CERN Multimedia

    Austin Ball

    2013-01-01

      Since the last report, much visible progress has been made, as the LS1 programme approaches the halfway point. From early October, technical and safety shift-crew have been present around the clock, allowing detectors to stay switched on overnight, ensuring that safety systems are operational and instructions for non-expert shift-crew are clear. LS1 progress Throughout the summer, whilst the solenoid vacuum tank and YB0 surfaces were accessible, an extensive installation programme took place to prepare for Tracker colder operation and the PLT installation, in 2014, the Phase 1 Pixel Tracker installation, in 2016–’17, and the HCAL Phase 1 upgrade completion, ending in LS2. This included pipework for N2 or dry air to flush the Tracker bulkhead region, many sensors to monitor temperature and dew point in the Tracker and its service channels, heating wires outside the Tracker cooling bundles, supports for the new vacuum-jacketed, concentric, CO2 Pixel cooling lines, the PLT cool...

  1. TECHNICAL COORDINATION

    CERN Multimedia

    A. Ball and W. Zeuner

    2012-01-01

      UXC + detectors As explained in detail in the November 2011 bulletin, the bellows unit at −18.5 m from the CMS interaction point was identified as a prime candidate for the regularly occurring pressure spikes which occasionally led to sustained severe background conditions in 2011, affecting dead time and data quality. Similar regions in LHC with vacuum instabilities were observed to be close to bellows, which radiography showed to have distorted RF-fingers — on removal, they proved to have been severely overheated. The plans for the Year-End Technical Stop were adapted to prioritise radiography of the bellows at 16 m to 18 m either end of CMS. Excellent work by the beam pipe, survey and heavy mechanical teams allowed the X-rays to be taken as planned on 20th December, showing that the bellow at −18.5m had an obvious non-conformity. The RF-fingers were found inside the end of the opposing flared pipe instead of outside. In addition, the overlap between fingers and...

  2. The International Haemovigilance Network Database for the Surveillance of Adverse Reactions and Events in Donors and Recipients of Blood Components: technical issues and results.

    Science.gov (United States)

    Politis, C; Wiersum, J C; Richardson, C; Robillard, P; Jorgensen, J; Renaudier, P; Faber, J-C; Wood, E M

    2016-11-01

    The International Haemovigilance Network's ISTARE is an online database for surveillance of all adverse reactions (ARs) and adverse events (AEs) associated with donation of blood and transfusion of blood components, irrespective of severity or the harm caused. ISTARE aims to unify the collection and sharing of information with a view to harmonizing best practices for haemovigilance systems around the world. Adverse reactionss and adverse events are recorded by blood component, type of reaction, severity and imputability to transfusion, using internationally agreed standard definitions. From 2006 to 2012, 125 national sets of annual aggregated data were received from 25 countries, covering 132.8 million blood components issued. The incidence of all ARs was 77.5 per 100 000 components issued, of which 25% were severe (19.1 per 100 000). Of 349 deaths (0.26 per 100 000), 58% were due to the three ARs related to the respiratory system: transfusion-associated circulatory overload (TACO, 27%), transfusion-associated acute lung injury (TRALI, 19%) and transfusion-associated dyspnoea (TAD, 12%). Cumulatively, 594 477 donor complications were reported (rate 660 per 100 000), of which 2.9% were severe. ISTARE is a well-established surveillance tool offering important contributions to international efforts to maximize transfusion safety. © 2016 International Society of Blood Transfusion.

  3. On the spatial pattern of semi-annual signals present in GRACE gravity fields

    Science.gov (United States)

    Naeimi, M.; Mueller, J.

    2009-04-01

    GRACE monthly solutions clearly show mass changes and mass redistribution within the earth. Such variability is due to some known and unknown geophysical and geodynamical processes interacting in the earth system. One way to distinguish between these different sources is to analyze the compound gravity signals in the spectral domain to separate phenomena with different temporal resolutions. Since the launch of GRACE satellites, more than seventy monthly solutions have been released by different processing centers. As the time span of the available data increases, the possibility of significantly detecting signals with extended temporal wavelength will increase, too. In this work, a spectral analysis is performed to the GRACE geoids over the globe and the spatial patterns of some relevant periodicities are shown as well as regions with secular changes. Besides some well known temporal variations like secular changes and annual cycles, our study explicitly shows the existence of semi-annual signals with considerable amplitudes in Nepal and northern India as well as in the Polar Regions. The significance of the signals is discussed and probable explanation will be given as well.

  4. Space Power Program Semiannual Progress Report for period ending June 30, 1963

    Energy Technology Data Exchange (ETDEWEB)

    Miller, A. J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    1963-10-11

    This is a report of progress on the Oak Ridge National Laboratory's research and development program on nuclear power plants for electrical power production in space vehicles. The work is carried out under AEG Reactor Experiments, Fuels, and Materials, and Reactor Component programs. Research and development work is under way on the stainless steel boiling-potassium reactor and the Medium Power Reactor Experiment, boiling alkali metal heat transfer, high-temperature and refractory alloys, fuel material, and space reactor shielding, particularly in connection with SNAP 2, 8, 10, and 50. Many of these OREL efforts are directed toward the development of a specific type of power plant, but they also furnish a significant contribution of scientific and engineering information needed in other programs on advanced SNAP systems. Progress on research and development directly related to the Medium Power Reactor Experiment (MPRE) is presented mostly in Part I of this report. Progress on the MPRE will, in the future, be reported on a quarterly basis. The form of the reporting will alternate from MPRE Quarterly Progress Reports to Space Power Semiannual Progress Reports.

  5. Office of Inspector General semiannual report to Congress, April 1--September 30, 1998

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    This Semiannual Report to Congress covers the period April 1 to September 30, 1998. The report summarizes significant Office of Inspector General (OIG) audit, inspection, and investigative accomplishments for the reporting period.These OIG efforts facilitated Department of Energy (DOE) efforts to improve the overall management of its programs. The OIG has developed a Strategic Plan which sets out its overall goals and objectives. The Office`s significant accomplishments are grouped by the strategic goals against which the OIG measures its performance. Highlights are presented on the following items: prime contractor fees policy strengthening; low-level and low-level mixed waste management program improvement; hazardous waste training agreement cost $6 million more than necessary; controls over architect-engineering costs improvement; funds expended contrary to Congressional direction and internal budget execution guidelines; company mischarges costs on several federal contracts; year 2000 computer issues; Qui Tam investigations; task force investigations; financial assistance grantees; DOE suspect/counterfeit items information trending and analysis; and management information systems.

  6. The Southern Hemisphere semiannual oscillation and circulation variability during the Mid-Holocene

    Directory of Open Access Journals (Sweden)

    D. Ackerley

    2010-07-01

    Full Text Available The Paleoclimate Modelling Intercomparison Project (PMIP was undertaken to assess the climatic effects of the presence of large ice-sheets and changes in the Earth's orbital parameters in fully coupled Atmosphere-Ocean General Circulation Models (AOGCMs. Much of the previous literature has focussed on the tropics and the Northern Hemisphere during the last glacial maximum and Mid-Holocene whereas this study focuses only on the Southern Hemisphere. This study addresses the representation of the Semiannual Oscillation (SAO in the PMIP2 models and how it may have changed during the Mid-Holocene. The output from the five models suggest a weakening of the (austral autumn circumpolar trough (CPT and (in all but one model a strengthening of the spring CPT. The effects of changing the orbital parameters are to cause warming and drying during spring over New Zealand and a cooling and moistening during autumn. The amount of spring warming/drying and autumn cooling/moistening is variable between the models and depends on the climatological locations of surface pressure anomalies associated with changes in the SAO. This study also undertakes an Empirical Orthogonal Function (EOF analysis of the leading modes of atmospheric variability during the control and Mid-Holocene phases for each model. Despite the seasonal changes, the overall month by month and interannual variability was simulated to have changed little from the Mid-Holocene to present.

  7. Observation of semiannual and annual oscillation in equatorial middle atmospheric long term temperature pattern

    Directory of Open Access Journals (Sweden)

    A. Guharay

    2009-11-01

    Full Text Available Extensive measurement of middle atmospheric temperature with the help of lidar data of more than 10 years (1998–2008 and TIMED/SABER data of 7 years (2002–2008, has been carried out from a low latitude station, Gadanki, India (13.5° N, 79.2° E, which exhibits the presence of semiannual oscillation (SAO and annual oscillation (AnO. The AnO component is stronger in the mesospheric region (80–90 km and the SAO is dominant at stratospheric altitudes (30–50 km. Overall, the AnO possesses higher amplitude ~6–7 K, and the SAO shows less amplitude ~1–2 K. The AnO present at 90 km finds crest near summer solstice, and the same at 80 km shows peak near winter solstice with a downward progression speed ~1.7 km/month. The SAO propagates downward with an average phase speed ~9 km/month and phase maximizes around equinox and solstice at 50 and 30 km, respectively. The observed SAO has also shown seasonal asymmetry in peaks.

  8. Technical Note: Harmonized retrieval of column-integrated atmospheric water vapor from the FTIR network – first examples for long-term records and station trends

    Directory of Open Access Journals (Sweden)

    C. Servais

    2009-11-01

    Full Text Available We present a method for harmonized retrieval of integrated water vapor (IWV from existing, long-term, measurement records at the ground-based mid-infrared solar FTIR spectrometry stations of the Network for the Detection of Atmospheric Composition Change (NDACC. Correlation of IWV from FTIR with radiosondes shows an ideal slope of 1.00(3. This optimum matching is achieved via tuning one FTIR retrieval parameter, i.e., the strength of a Tikhonov regularization constraining the derivative (with respect to height of retrieved water profiles given in per cent difference relative to an a priori profile. All other FTIR-sonde correlation parameters (intercept=0.02(12 mm, bias=0.02(5 mm, standard deviation of coincident IWV differences (stdv=0.27 mm, R=0.99 are comparable to or better than results for all other ground-based IWV sounding techniques given in the literature. An FTIR-FTIR side-by-side intercomparison reveals a strong exponential increase in stdv as a function of increasing temporal mismatch starting at Δt≈1 min. This is due to atmospheric water vapor variability. Based on this result we derive an upper limit for the precision of the FTIR IWV retrieval for the smallest Δt(=3.75 min still giving a statistically sufficient sample (32 coincidences, i.e., precision(IWVFTIR As first application examples long-term IWV data sets are retrieved from the FTIR records of the Zugspitze (47.4° N, 11.0° E, 2964 m a.s.l. and Jungfraujoch (46.5° N, 8.0° E, 3580 m a.s.l. NDACC sites. Station-trend analysis comprises a linear fit after subtracting an intra-annual model (3 Fourier components and constructing an uncertainty interval [95% confidence] via bootstrap resampling. For the Zugspitze a significant trend of 0.79 [0.65, 0.92] mm/decade is found for the time interval [1996–2008], whereas for the Jungfraujoch no significant trend is found. This confirms recent findings that strong variations of IWV trends do occur above land on the local to

  9. Semiannual Report of the Chemistry Department, June--November 1966; Rapport semestriel du departement de chimie, juin--novembre 1966

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1967-07-01

    This semiannual report of the Chemistry Department of the Cea of Fontenay-aux Roses, presents in its first part researches on the chemical analysis, the treatment of fairly and slightly active effluents, the uranium treatment, studies on electrometallurgy, studies on corrosion and studies on filtration and elimination on sea water of hard compounds. The second part is devoted to the study of aqueous reprocessing of irradiated fuels (laboratory and pilot plant), anhydrous reprocessing, actinides elements isotopes preparation and study, fission products concentrated solution vitrification study and fundamental studies on acid-base properties. (A.L.B.)

  10. Semi-annual status report of the Canadian Nuclear Fuel Waste Management Program, April 1--September 30, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Wright, E.D. [comp.

    1992-02-01

    This report is the eleventh in a series of semi-annual status reports on the research and development program for the safe management and disposal of Canada's nuclear fuel waste. it describes progress achieved in the three major subprograms, engineered systems, natural systems and performance assessment, from 1991 April 1 to September 30. It also gives a brief description of the activities being carried out in preparation for the public and governmental review of the disposal concept. Since 1987, this program has been jointly funded by AECL and Ontario Hydro under the auspices of the CANDU Owners Group (COG).

  11. Technical Note: Harmonized retrieval of column-integrated atmospheric water vapor from the FTIR network - first examples for long-term records and station trends

    Science.gov (United States)

    Sussmann, R.; Borsdorff, T.; Rettinger, M.; Camy-Peyret, C.; Demoulin, P.; Duchatelet, P.; Mahieu, E.; Servais, C.

    2009-11-01

    We present a method for harmonized retrieval of integrated water vapor (IWV) from existing, long-term, measurement records at the ground-based mid-infrared solar FTIR spectrometry stations of the Network for the Detection of Atmospheric Composition Change (NDACC). Correlation of IWV from FTIR with radiosondes shows an ideal slope of 1.00(3). This optimum matching is achieved via tuning one FTIR retrieval parameter, i.e., the strength of a Tikhonov regularization constraining the derivative (with respect to height) of retrieved water profiles given in per cent difference relative to an a priori profile. All other FTIR-sonde correlation parameters (intercept=0.02(12) mm, bias=0.02(5) mm, standard deviation of coincident IWV differences (stdv)=0.27 mm, R=0.99) are comparable to or better than results for all other ground-based IWV sounding techniques given in the literature. An FTIR-FTIR side-by-side intercomparison reveals a strong exponential increase in stdv as a function of increasing temporal mismatch starting at Δt≍1 min. This is due to atmospheric water vapor variability. Based on this result we derive an upper limit for the precision of the FTIR IWV retrieval for the smallest Δt(=3.75 min) still giving a statistically sufficient sample (32 coincidences), i.e., precision(IWVFTIR)bias of the IWV retrievals from the two different FTIR instruments is nearly negligible (0.02(1) mm). The optimized FTIR IWV retrieval is set up in the standard NDACC algorithm SFIT 2 without changes to the code. A concept for harmonized transfer of the retrieval between different stations deals with all relevant control parameters; it includes correction for differing spectral point spacings (via regularization strength), and final quality selection of the retrievals (excluding the highest residuals (measurement minus model), 5% of the total). As first application examples long-term IWV data sets are retrieved from the FTIR records of the Zugspitze (47.4° N, 11.0° E, 2964 m a

  12. Advanced Processing Technology semiannual report, March--December 1991. Volume 1, Number 1

    Energy Technology Data Exchange (ETDEWEB)

    Adamson, M.; Kline-Simon, K. [eds.

    1991-12-31

    This first issue of the APT Semiannual Report focuses on APT`s defense-related technologies. These technologies are a continuation of the research, development, and engineering work performed by LLNLs Special Isotope Separation (SIS) Program. SIS was the first large-scale DOE venture that had environmentally conscious manufacturing processes and facilities as its deliverables. The objectives were to create a facility where the only outputs were either usable products or disposable wastes, and to comply with existing and anticipated federal, state, and local regulations related to safeguards, security, health and safety. To meet these objectives, revolutionary changes were needed in plutonium processing operations, chemistry, and equipment. New processes had to be developed that enhanced worker safety, minimized operator radiation dose, minimized waste at the point of generation, and provided for built-in recycling of residues. The SIS Program developed and demonstrated the technology (both chemistry and physics) necessary to provide plutonium with individual isotopic tailoring. This process made it possible to transform fuel-grade plutonium into weapon-grade material. However, due to the changing world political climate, the country`s need for plutonium to make new weapons has decreased dramatically. As a result, the planned SIS plutonium-separation plant will not be built. After the SIS Program was canceled in 199 1, Congress directed that the plutonium processing technologies under development for the SIS Program be redirected to the weapons program. APT took over the development of the innovative SIS technologies and is applying them to the development of a new, reconfigured Nuclear Weapons Complex -- Complex 21. ``Close Out of the SIS Program`` describes the completion of the SIS research and development work, and the transfer of key technologies to support this reconfiguration effort.

  13. Network Collaboration with UNIX.

    Science.gov (United States)

    Horn, Wm. Dennis

    1993-01-01

    Discusses networking as a collaboration tool in the teaching of technical writing. Argues that some degree of collaboration is innate to all writing, that word processing already facilitates that collaboration, and that networking is the next enhancement to the collaborative process. (RS)

  14. E-Division semiannual report. Progress report, July 1--December 31, 1978

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, P.A. (comp.)

    1979-01-01

    The status of the programs and projects of the Electronics Division for the period July through December 1978 is reported. The presentation is divided into three sections: Research, Engineering Support, and Technical Services. Each of these sections presents the activities and accomplishments of the corresponding branch within the Division. The primary goal of the Research and Development branch is to advance technology for future applications. The primary goal of the Engineering Support Branch is to apply advanced technology to Laboratory and material problems. The primary goal of the Technical Services Branch is to provide a technical base and support for Laboratory programs. Most of the individual reports are quite short.

  15. The Technical Issues Of Traffic Analysis

    Directory of Open Access Journals (Sweden)

    Pavel Vladimirovich Yegorov

    2016-03-01

    Full Text Available The main problem in the analysis of Internet traffic associated with a large number of network applications, complex patterns of communication and a significant amounts of information. The definition of the category of traffic using the analysis of the number of port is irrelevant for P2P applications, streaming data and many other types of network applications. The article describes some of technical issues related to the analysis of Internet traffic.

  16. Teaching Technical Writing - Towards Technical Writing

    DEFF Research Database (Denmark)

    Kastberg, Peter

    2000-01-01

    In this paper I will present key aspects of the curriculum for the university degree in technical translation that I have designed for and subsequently implemented at the German Department of the Aarhus School of Business, Denmark. My starting point will be a critical discussion of the norm that ...... of technical writing....

  17. Information networks and links

    Science.gov (United States)

    Davydov, G. B.

    The basic operating principles of a telecommunications network are described. The technical characteristics of three types of telecommunications network are discussed, including voice-based (telephone) systems; television networks; and data (digital) communications. Among the specific transmission and channeling systems described are: satellite relays; microwae relays; ground based microwave relays; and pulse code modulation; (PCM). The integration of world wide systems for coordinating voice data, and video communications is also discussed.

  18. Solar Rotational Periodicities and the Semiannual Variation in the Solar Wind, Radiation Belt, and Aurora

    Science.gov (United States)

    Emery, Barbara A.; Richardson, Ian G.; Evans, David S.; Rich, Frederick J.; Wilson, Gordon R.

    2011-01-01

    The behavior of a number of solar wind, radiation belt, auroral and geomagnetic parameters is examined during the recent extended solar minimum and previous solar cycles, covering the period from January 1972 to July 2010. This period includes most of the solar minimum between Cycles 23 and 24, which was more extended than recent solar minima, with historically low values of most of these parameters in 2009. Solar rotational periodicities from S to 27 days were found from daily averages over 81 days for the parameters. There were very strong 9-day periodicities in many variables in 2005 -2008, triggered by recurring corotating high-speed streams (HSS). All rotational amplitudes were relatively large in the descending and early minimum phases of the solar cycle, when HSS are the predominant solar wind structures. There were minima in the amplitudes of all solar rotational periodicities near the end of each solar minimum, as well as at the start of the reversal of the solar magnetic field polarity at solar maximum (approx.1980, approx.1990, and approx. 2001) when the occurrence frequency of HSS is relatively low. Semiannual equinoctial periodicities, which were relatively strong in the 1995-1997 solar minimum, were found to be primarily the result of the changing amplitudes of the 13.5- and 27-day periodicities, where 13.5-day amplitudes were better correlated with heliospheric daily observations and 27-day amplitudes correlated better with Earth-based daily observations. The equinoctial rotational amplitudes of the Earth-based parameters were probably enhanced by a combination of the Russell-McPherron effect and a reduction in the solar wind-magnetosphere coupling efficiency during solstices. The rotational amplitudes were cross-correlated with each other, where the 27 -day amplitudes showed some of the weakest cross-correlations. The rotational amplitudes of the > 2 MeV radiation belt electron number fluxes were progressively weaker from 27- to 5-day periods

  19. Fall 2010 Semiannual (III.H. and I.U.) Report for the HWMA/RCRA Post Closure Permit for the INTEC Waste Calcining Facility and the CPP 601/627/640 Facility at the INL Site

    Energy Technology Data Exchange (ETDEWEB)

    Boehmer, Ann

    2010-11-01

    The Waste Calcining Facility is located at the Idaho Nuclear Technology and Engineering Center. In 1999, the Waste Calcining Facility was closed under an approved Hazardous Waste Management Act/Resource Conservation and Recovery Act (HWMA/RCRA) Closure Plan. Vessels and spaces were grouted and then covered with a concrete cap. The Idaho Department of Environmental Quality issued a final HWMA/RCRA post-closure permit on September 15, 2003, with an effective date of October 16, 2003. This permit sets forth procedural requirements for groundwater characterization and monitoring, maintenance, and inspections of the Waste Calcining Facility to ensure continued protection of human health and the environment. The post closure permit also includes semiannual reporting requirements under Permit Conditions III.H. and I.U. These reporting requirements have been combined into this single semiannual report, as agreed between the Idaho Cleanup Project and Idaho Department of Environmental Quality. The Permit Condition III.H. portion of this report includes a description and the results of field methods associated with groundwater monitoring of the Waste Calcining Facility. Analytical results from groundwater sampling, results of inspections and maintenance of monitoring wells in the Waste Calcining Facility groundwater monitoring network, and results of inspections of the concrete cap are summarized. The Permit Condition I.U. portion of this report includes noncompliances not otherwise required to be reported under Permit Condition I.R. (advance notice of planned changes to facility activity which may result in a noncompliance) or Permit Condition I.T. (reporting of noncompliances which may endanger human health or the environment). This report also provides groundwater sampling results for wells that were installed and monitored as part of the Phase 1 post-closure period of the landfill closure components in accordance with HWMA/RCRA Landfill Closure Plan for the CPP-601 Deep

  20. Technical Report Writing Today

    DEFF Research Database (Denmark)

    Riordan, Daniel G.

    2014-01-01

    Section 1: Technical Communication Basics (8 chapters on tech com, audiences, tech com process, tech com style, researching, designing pages, using visual aids, describing). Section 2: Technical Communication Applications (7 chapters on sets of instructions, informal reports and email, developing...

  1. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  2. Technical training: places available

    CERN Document Server

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  3. Technical training - places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tel: 74924)

  4. Technical training: places available

    CERN Multimedia

    2014-01-01

    If you would like more information on a course, or have any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Marie Lahchimi, Technical Training Administration (Tel: 74924)

  5. Technical training: places available

    CERN Document Server

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch. Eva Stern and Elise Romero, Technical Training Administration (Tél : 74924)  

  6. 2013 Technical Roundtable

    Science.gov (United States)

    On December 9, 2013, EPA reconvened the study’s Technical Roundtable. Subject-matter experts discussed the outcomes of the 2013 Technical Workshops, stakeholder engagement, and plans for draft assessment report.

  7. Dynamic Effects of the Earth's Rotation Caused by the Annual and Semi-Annual Cyclic Mass Redistribution of the Planet

    Directory of Open Access Journals (Sweden)

    M. Yu. Barkin

    2016-01-01

    Full Text Available The paper deals with development of the theory of perturbed rotational motion of a celestial body with variable geometry of the masses. Its main task is to study the impact of annual and semi-annual variations of the Earth's mass geometry (a component of its inertia tensor, as well as a component of its relative angular momentum, on the movement of the Earth's poles and its axial rotation. The body is considered to be a free (isolated, and the problem formulation corresponds to the classical Liouville problem on rotation of a variable body. Euler conical movement of the axially symmetric body with an arbitrary constant half-angle  is assumed as the unperturbed motion. In the classical theory of the Earth's rotation this angle is usually assumed to be zero.In the last 20 years, accuracy to determine the Earth rotation parameters owing to using methods of space geodesy and method of Very Long Baseline Interferometry (VLBI has increased by about three orders of magnitude and has made about  i.e., in angle measure it is about 10 - 20 arc-microseconds. According to experts, the theory of the Earth's rotation with such precision is not created yet. The paper is focused just on the new dynamic studies of the Earth rotation at a higher level of accuracy than has been done in previous studies, using a new approach to the problem, based on the new forms of the equations of motion (in the Andoyer variables and the analytical methods of perturbation theory (small parameter method.The problem of perturbed rotational motion with variable geometry and variable mass relative angular momentum in the first approximation is solved in Andoyer variables and projections of the angular velocity of the planet rotation. The analytical solution allows us to run applications to study dynamic effects from above factors for various bodies in the solar system, including the Earth. The solution allowed us to obtain the following parameters of the fundamental effects in the

  8. Handbook of Large-Scale Random Networks

    CERN Document Server

    Bollobas, Bela; Miklos, Dezso

    2008-01-01

    Covers various aspects of large-scale networks, including mathematical foundations and rigorous results of random graph theory, modeling and computational aspects of large-scale networks, as well as areas in physics, biology, neuroscience, sociology and technical areas

  9. Prescription of technical aids by general practitioners in the Netherlands.

    NARCIS (Netherlands)

    Biermans, M.C.J.; Dekker, J.; Ende, C.H.M. van den

    2004-01-01

    This study focused on the allocation of technical aids, in particular which technical aids general practitioners (GPs) prescribe for what patients. Data was collected by 64 Dutch GPs participating in a nationwide representative sentinel practice network. The GPs gathered information on type of

  10. 76 FR 64083 - Reliability Technical Conference; Notice of Technical Conference

    Science.gov (United States)

    2011-10-17

    ... Energy Regulatory Commission Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, November 29... addressing risks to reliability that were identified in earlier Commission technical conferences. The...

  11. Sixth Semiannual Report of the Commission to the Congress: Atomic Energy and the Life Sciences, July 1949

    Energy Technology Data Exchange (ETDEWEB)

    Lilienthal, David E.; Bacher, Robert F.; Pike, Sumner T.; Strauss, Lewis L.

    1949-07-01

    The document represents the sixth semiannual Atomic Energy Commission (AEC) report to Congress. The report sums up briefly the major developments in the national atomic energy program and further gives a comprehensive review of one of its major phases -- the biological and medical activities. It outlines the AEC program in all phases of medicine and biology, reviews research results and projects under way, reports what is known of the effects of radiation on man and other living things, and surveys the benefits which may be derived from the use of radiation for diagnosis and treatment of disease and for the study of plants and animals. Since radiation from atomic sources also is potentially harmful to all living things, the Commission has set up safeguards for all who might, without such protection, be exposed to harmful radiation.

  12. F-Area Hazardous Waste Management Facility Semiannual Corrective Action Report, First and Second Quarter 1998, Volume I and II

    Energy Technology Data Exchange (ETDEWEB)

    Chase, J.

    1998-10-30

    This report addresses groundwater quality and monitoring data during first and second quarter 1998 for the F-Area Hazardous Waste management Facility (HWMF). The report fulfills the semiannual reporting requirements of Module III, Section D, of the 1995 Resource Conservation and Recovery Act (RCRA) Renewal Permit (South Carolina Hazardous and Mixed Waste Permit SC1-890-008-989), effective October 5, 1995 (hereafter referred to as the RCRA permit), and Section C of the Underground Injection Control Permit Application hereafter referred to as the Section C of the Underground Injection Control Permit Application (hereafter referred to as the UIC permit). The HWMF is described in the Introduction to Module III, Section C, of the RCRA permit.

  13. Title V Semi-Annual Emissions Report for Permit P100R1 July 1, 2011 - December 31, 2011

    Energy Technology Data Exchange (ETDEWEB)

    Whetham, Walter [Los Alamos National Laboratory

    2012-03-15

    Reports of actual emissions from permitted sources in Section 2.0 shall be submitted on a 6 month basis. Reports shall not include emissions from insignificant activities. Emission estimates of criteria pollutants NOx, CO, SO2, PM and VOCs shall not include fugitive emissions. Emission estimates of HAPs shall include fugitive emissions. The reports shall include a comparison of actual emissions that occurred during the reporting period with the facility-wide allowable emission limits specified in Section 2.11 of this permit. The report required by Condition 4.1 shall be submitted within 90 days from the end of the reporting period. The semiannual report required by Condition 4.2 shall be submitted within 45 days from the end of the reporting period. The reporting periods are January 1st to June 30th and July 1st to December 31st. This condition is pursuant to 20.2.70.302.E.1 NMAC.

  14. Advanced Researech and Technology Development fossil energy materials program: Semiannual progress report for the period ending September 30, 1988

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    The objective of the ARandTD Fossil Energy Materials Program is to conduct research and development on materials for fossil energy applications with a focus on the longer-term and generic needs of the various fossil fuel technologies. The program includes research aimed toward a better understanding of materials behavior in fossil energy environments and the development of new materials capable of substantial enhancement of plant operations and reliability. The ORNL Fossil Energy Materials Program Office compiles and issues this combined semiannual progress report from camera-ready copies submitted by each of the participating subcontractor organizations. This report of activities on the program is organized in accordance with a work breakdown structure in which projects are organized according to materials research thrust areas. These areas are (1) Structural Ceramics, (2) Alloy Development and Mechanical Properties, (3) Corrosion and Erosion of Alloys, and (4) Assessments and Technology Transfer. Individual projects are processed separately for the data bases.

  15. Sensitivity of the Southern Hemisphere SemiannualOscillation in surface pressure to changes in surface boundary conditions

    Science.gov (United States)

    Walland, David J.; Simmonds, Ian H.

    1998-08-01

    The Melbourne University General Circulation Model has been used to simulate the climate of the Southern Hemisphere and its portrayal of the Semiannual Oscillation (SAO) in surface pressure has been assessed. The model is shown to underestimate the amplitude of the SAO slightly but simulate its general structure quite well. To assess the relative importance of various factors in determining the characteristics of the SAO, we perform several anomaly experiments.In particular, we conduct an experiment where the Antarctic topography is leveled, an experiment where the sea ice surrounding the Antarctic continent is removed and also an experiment that combines the two changes. The impact on the SAO is examined as a means to attempt to determine what the mechanisms for the changes are. The removal of topography, in particular,is demonstrated to have a great effect on the SAO, while the sea ice makes a more modest impact but of the opposite nature. Some possible mechanisms are suggested.

  16. Power plant waste heat utilization in aquaculture. Semi-annual report, No. 2, 1 November 1977--1 June 1978

    Energy Technology Data Exchange (ETDEWEB)

    Guerra, C.R.; Godfriaux, B.L.

    1978-06-01

    The principal objective is to evaluate, at proof-of-concept scale, the potential of intensive aquaculture operations using power plant thermal discharges to enhance productivity. The field experiments involve the rearing of rainbow trout (Salmo gairdneri), channel catfish (Ictalurus punctatus) and American eel (Anguilla rostrata) for successive periods (semi-annual) in accordance with the temperature of the thermal effluents. Striped bass (Morone saxatilis) and the freshwater shrimp (Macrobrachium rosenbergii) are also being tested in smaller, laboratory size culture systems. The above mentioned species were selected because of their economic importance. They will be evaluated for food quality and marketability with the cooperation of potential commercial users. Aquaculture facilities were constructed at a steam electric generating plant for studies determining use for waste heat released into condenser cooling water. Growth rates, food conversion ratios, disease problems and mortality rates are being studied in the project. (Color illustrations reproduced in black and white) (Portions of this document are not fully legible)

  17. Technical solutions to enable embedded generation growth

    Energy Technology Data Exchange (ETDEWEB)

    Lynch, C.A.; Todd, S.; Millar, W.; Wood, H.S.

    2003-07-01

    This report describes the results of one of a series of studies commissioned by the UK Department of Trade and Industry into various aspects of embedded generation with the aim of supporting the development and deployment of electrical sources (particularly their ease of connection to the network) to deliver power to consumers. The first phase of the project involved a literature review and meetings with embedded generation developers and planning engineers from distribution network operators (DNOs). The second phase investigated embedded generation at different levels of the distribution network and included modelling a representative network. Technologies that could facilitate a significant increase in embedded generation were identified and estimates made of when and where significant development would be needed. Technical problems identified by DNOs were concerned with thermal loading, voltage regulation, fault levels, protection and network operation. A number of non-technical (commercial and regulatory) problems were also identified. The report describes the UK regulatory framework, the present situation, the British power system, the accommodation of embedded generation by established means, the representative model and technical innovations.

  18. JSMARTS Initiative: Advanced Distributed Simulation Across the Government of Canada, Academia and Industry - Technical Description

    National Research Council Canada - National Science Library

    Kim, B; Johnson, B; Youssef, R; Vallerand, A. L; Herdman, C; Gamble, M; Lavoie, R; Kurts, D; Gladstone, K

    2005-01-01

    ...) at the Enterprise level, led by ADM(Mat). In an effort to reduce the technical risk associated with networking simulation stakeholders at various levels of the DND Enterprise, a WAN (Wide Area Network...

  19. E-Division semiannual report, January 1--June 30, 1978. [LASL

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, P.A. (comp.)

    1978-10-01

    The status of the programs and projects of the Electronics Division is reported for the period of January through June 1978. The presentation is divided into three sections: Research, Engineering Support, and Technical Services. Each of these sections presents the activities and accomplishments of the corresponding branch within the Division. The primary goal of the Research and Development branch is to advance technology for future applications. The primary goal of the Engineering Support branch is to apply advanced technology to Los Alamos Scientific Laboratory (LASL) and material problems. The primary goal of the Technical Services branch is to provide a technical base and support for LASL programs. Most of the individual reports are quite short; however, significant amounts of information are given in the area of detector research and development. 52 figures, 7 tables.

  20. E-Division semiannual report. Progress report, December 1, 1976--May 30, 1977. [LASL

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, P.A. (comp.)

    1977-11-01

    Detector research and development are described first. Then, briefer reports are given on research on the following topics: electronic temperature monitoring and identification for livestock, electromagnetic probing (for fracture mapping), fiber optics for downhole instrumentation (for weapons testing), adaptive control applied to HVAC systems, energy environmental simulator, and high-temperature electronics. Engineering support (development projects, program support, instrumentation support) and technical services (general group activities, recharge programs, research and development programs, minicomputer maintenance, information and training services) are sketched. The report is basically administrative in nature, with a minimum of technical material. 47 figures, 10 tables. (RWR)

  1. Inspector General Semiannual Report to Congress - October 1, 2008 - March 31, 2009

    Energy Technology Data Exchange (ETDEWEB)

    None

    2008-10-01

    On behalf of the Department of Energy's Office of Inspector General, I am pleased to submit our Semiannual Report to Congress for the period ending March 31, 2009. The Report highlights key accomplishments of the Office of Inspector General, particularly pertaining to our efforts to ensure the economy, efficiency, and effectiveness of Department of Energy operations. Details pertaining to some of our most significant reviews and projects are presented in the Report. This reporting period has been quite eventful. On February 17, 2009, the President signed the American Recovery and Reinvestment Act of 2009. The stated intent of this new legislation is to strengthen the U.S. economy through the creation of new jobs, aiding State and local governments with budget shortfalls, cutting taxes for working families, and investing in the long-term health of the Nation's economic prosperity. The Recovery Act establishes the status of the Nation's energy supply as a prime focus. Specifically, the Department of Energy will receive approximately $40 billion for various energy, environmental, and science programs and initiatives. The passage of this legislation makes the coming months an exciting and transformative time for the Department of Energy and the Office of Inspector General. In recognition of the need for effective oversight to protect taxpayer interests, the Recovery Act includes the creation of the Recovery Act Accountability and Transparency Board and mandates specific actions by the Inspectors General. I will be a permanent member of this newly created Board, along with nine other Inspectors General whose agencies are significant recipients of Recovery Act funds. Since the passage of the legislation, my office has developed a strategy consistent with the objectives outlined in the Recovery Act. The overarching goal of the strategy is to ensure that the taxpayers interests relating to the performance and results of the Recovery Act are protected. During

  2. Project INTREX. Semiannual Activity Report, 15 March 1968 to 15 September 1968.

    Science.gov (United States)

    Massachusetts Inst. of Tech., Cambridge.

    This report describes the current status of Project INTREX experiments and provides a detailed technical record. Activities concentrating on the bibliographic access problem involve: (1) the investigation of a digitally-encoded, machine-manipulated augmented catalog, for which the task of preparing entries for 10,000 documents is about half…

  3. HTGR Fuel Technology Program. Semiannual report for the period ending March 31, 1983

    Energy Technology Data Exchange (ETDEWEB)

    1983-07-01

    This document reports the technical accomplishments of the HTGR Fuel Technology Program at GA Technologies Inc. during the first half of FY 83. The activities include the fuel process, fuel materials, fuel cycle, fission product transport, core component verification, and core technology transfer tasks necessary to support the design and development of a steam cycle/cogeneration (SC/C) version of the HTGR.

  4. International Standards Development for Marine and Hydrokinetic Renewable Energy - Final Report on Technical Status

    Energy Technology Data Exchange (ETDEWEB)

    Rondorf, Neil E.; Busch, Jason; Kimball, Richard

    2011-10-29

    This report summarizes the progress toward development of International Standards for Marine and Hydrokinetic Renewable Energy, as funded by the U.S. Department of Energy (DOE) under the International Electrotechnical Commission (IEC) Technical Committee 114. The project has three main objectives: 1. Provide funding to support participation of key U.S. industry technical experts in 6 (originally 4) international working groups and/or project teams (the primary standards-making committees) and to attend technical meetings to ensure greater U.S. involvement in the development of these standards. 2. Provide a report to DOE and industry stakeholders summarizing the IEC standards development process for marine and hydrokinetic renewable energy, new international standards and their justifications, and provide standards guidance to industry members. 3. Provide a semi-annual (web-based) newsletter to the marine renewable energy community. The newsletter will educate industry members and stakeholders about the processes, progress, and needs of the US efforts to support the international standards development effort. The newsletter is available at www.TC114.us

  5. Global Alumni Networks

    DEFF Research Database (Denmark)

    Hansen, Annette Skovsted

    2015-01-01

    One significant and often overlooked outcome of technical assistance and overseas capacity development programmes is the inclusion of experts from developing countries in epistemic communities. The main argument of this article is that the formal network structure offered to alumni of Japanese...... technical assistance and capacity development programmes have provided experts from developing countries access to epistemic communities since the early 1960s. This exploration of an alternative way of understanding capacity development programmes shows how alumni have made the networks global by using...

  6. Research of Innovation Diffusion on Industrial Networks

    Directory of Open Access Journals (Sweden)

    Yongtai Chen

    2014-01-01

    Full Text Available The real value of innovation consists in its diffusion on industrial network. The factors which affect the diffusion of innovation on industrial network are the topology of industrial network and rules of diffusion. Industrial network is a complex network which has scale-free and small-world characters; its structure has some affection on threshold, length of path, enterprise’s status, and information share of innovation diffusion. Based on the cost and attitude to risk of technical innovation, we present the “avalanche” diffusing model of technical innovation on industrial network.

  7. Resource management in wireless networking

    CERN Document Server

    Cardei, Mihaela; Du, Ding-Zhu

    2005-01-01

    This is the first book that provides readers with a deep technical overview of recent advances in resource management for wireless networks at different layers of the protocol stack. The subject is explored in various wireless networks, such as ad hoc wireless networks, 3G/4G cellular, IEEE 802.11, and Bluetooth personal area networks.Survey chapters give an excellent introduction to key topics in resource management for wireless networks, while experts will be satisfied by the technical depth of the knowledge imparted in chapters exploring hot research topics.The subject area discussed in this book is very relevant today, considering the recent remarkable growth of wireless networking and the convergence of wireless personal communications, internet technologies and real-time multimedia.This volume is a very good companion for practitioners working on implementing solutions for multimedia and Quality of Service - sensitive applications over wireless networks.Written for:Researchers, faculty members, students...

  8. Technical efficiency, efficiency change, technical progress and ...

    African Journals Online (AJOL)

    In May 2006, the Ministers of Health of all the countries on the African continent, at a special session of the African Union, undertook to institutionalise efficiency monitoring within their respective national health information management systems. The specific objectives of this study were: (i) to assess the technical efficiency of ...

  9. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Glasser, Alan H. [Fusion Theory and Computation Inc., Kingston, WA (United States)

    2018-02-02

    Final technical report on DE-SC0016106. This is the final technical report for a portion of the multi-institutional CEMM project. This report is centered around 3 publications and a seminar presentation, which have been submitted to E-Link.

  10. Technical Manual. The ACT®

    Science.gov (United States)

    ACT, Inc., 2014

    2014-01-01

    This manual contains technical information about the ACT® college readiness assessment. The principal purpose of this manual is to document the technical characteristics of the ACT in light of its intended purposes. ACT regularly conducts research as part of the ongoing formative evaluation of its programs. The research is intended to ensure that…

  11. Scientific and Technical English.

    Science.gov (United States)

    Vaclavik, Jaroslav

    Technical English differs from everyday English because of the specialized contexts in which it is used and because of the specialized interests of scientists and engineers. This text provides exercises in technical and scientific exposition in the following fields: mathematics, physics, temperature effects, mechanics, dynamics, conservation of…

  12. Developing Technical Skill Assessments

    Science.gov (United States)

    Hyslop, Alisha

    2009-01-01

    One of the biggest challenges facing the career and technical education (CTE) community as it works to implement the 2006 Perkins Act is responding to more rigorous requirements for reporting on CTE students' technical skill attainment. The U.S. Department of Education suggested in non-regulatory guidance that states and locals use the number of…

  13. Summer Technical Students 2004

    CERN Multimedia

    Maximilien Brice

    2004-01-01

    About 100 technical and doctoral students arrive each year, undergraduates and post-graduates who are preparing diploma or doctoral theses in applied science and technology. They spend up to two years at the Laboratory, as technical students as part of their formal training for a recognised degree or its equivalent.

  14. Transformation of technical infrastructure

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev

    1998-01-01

    article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply.......article about the need of new planning forums in order to initiate transformations with in management of large technical systems for energy, waste and water supply....

  15. Annual, semi-annual and ter-annual variations of gravity wave momentum flux in 13 years of SABER data

    Science.gov (United States)

    Chen, Dan; Preusse, Peter; Ern, Manfred; Strube, Cornelia

    2017-04-01

    In this study, the variations at different time scales such as the annual cycle, the semiannual oscillation (SAO), the ter-annual cycle (about four monthly) and the quasi-biennial oscillation (QBO) in zonal mean GW amplitudes and GW momentum flux (GWMF) have been investigated using satellite observations from 2002-2014 and combining ECMWF high resolution data with the GORGRAT model. The global distribution (patterns) of spectral amplitudes of GW momentum flux in stratosphere and mesosphere (from 30 km to 90 km) show that the annual cycle is the most predominant variation, and then are SAO, ter-annual cycle and QBO. For annual components, two relatively isolated amplitude maxima appear in each hemisphere: a subtropical maximum is associated with convective sources in summer, a mid and high latitude maximum is associated with the polar vortex in winter. In the subtropics, GWs propagate upward obliquely to the higher latitudes. The winter maximum in the southern hemisphere has larger momentum flux than that one in the northern hemisphere. While on the SH the phase (i.e. time corresponding to the maximum GWMF) continuously descends with the maximum in July in the upper mesosphere and in September in the lower stratosphere, on the northern hemisphere, the phase has no visible altitude dependence with a maximum in December. For semiannual variations, in the MLT (70-80 km) region, there is an obvious enhancement of spectral amplitude at equatorial latitudes which relate to the dissipation of convectively forced GWs. The SAO in absolute momentum flux and the annual cycle in zonal momentum flux indicated that the variations at mid-latitudes (about from 30°-40°) are not a SAO signals but rather an annual cycle when the direction of GWMF is considered. The ter-annual cycle may be related to the duration of active convection in subtropical latitudes (from June to Sep. in north hemisphere) Indications for QBO are found latitude extension to mid-latitudes in stratosphere of

  16. Trends in Integrated Ship Control Networking

    DEFF Research Database (Denmark)

    Jørgensen, N.; Nielsen, Jens Frederik Dalsgaard

    1997-01-01

    Integrated Ship Control systems can be designed as robust, distributed, autonomous control systems. The EU funded ATOMOS and ATOMOS II projects involves both technical and non technical aspects of this process. A reference modelling concept giving an outline of a generic ISC system covering...... the network and the equipment connected to it, a framework for verification of network functionality and performance by simulation and a general distribution platform for ISC systems, The ATOMOS Network, are results of this work....

  17. Scalable Virtual Network Mapping Algorithm for Internet-Scale Networks

    Science.gov (United States)

    Yang, Qiang; Wu, Chunming; Zhang, Min

    The proper allocation of network resources from a common physical substrate to a set of virtual networks (VNs) is one of the key technical challenges of network virtualization. While a variety of state-of-the-art algorithms have been proposed in an attempt to address this issue from different facets, the challenge still remains in the context of large-scale networks as the existing solutions mainly perform in a centralized manner which requires maintaining the overall and up-to-date information of the underlying substrate network. This implies the restricted scalability and computational efficiency when the network scale becomes large. This paper tackles the virtual network mapping problem and proposes a novel hierarchical algorithm in conjunction with a substrate network decomposition approach. By appropriately transforming the underlying substrate network into a collection of sub-networks, the hierarchical virtual network mapping algorithm can be carried out through a global virtual network mapping algorithm (GVNMA) and a local virtual network mapping algorithm (LVNMA) operated in the network central server and within individual sub-networks respectively with their cooperation and coordination as necessary. The proposed algorithm is assessed against the centralized approaches through a set of numerical simulation experiments for a range of network scenarios. The results show that the proposed hierarchical approach can be about 5-20 times faster for VN mapping tasks than conventional centralized approaches with acceptable communication overhead between GVNCA and LVNCA for all examined networks, whilst performs almost as well as the centralized solutions.

  18. State geothermal commercialization programs in seven Rocky Mountain states. Semiannual progress report, July-December 1981

    Energy Technology Data Exchange (ETDEWEB)

    Lunis, B.C. (ed.)

    1982-08-01

    The activities and findings of the seven state commercialization teams participating in the Rocky Mountain Basin and Range commercialization program are described. The period covered is July through December 1981. Background information is provided, program objectives and the technical approach used are discussed, and the benefits of the program are described. Prospect identification, area development plans, site specific development analyses, time-phased project plans, the aggregated prospective geothermal energy use, and institutional analyses are discussed. Public outreach activities are covered and findings and recommendations are summarized.

  19. HTGR Generic Technology Program. Semiannual report for the period ending March 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1979-06-01

    This document reports the technical accomplishments on the HTGR Generic Technology Program at General Atomic during the first half of FY-79. It covers a period when the major design direction of the National HTGR Program is in the process of changing from the HTGR-SC emphasis to an HTGR-GT emphasis in the near term. The HTGR Generic Technology Program activities have been redirected to ensure that the tasks covered are supportive of this changing emphasis in HTGR applications. The activities include the need to develop a medium enriched uranium (MEU) fuel, and the need to qualify materials and components for the higher temperatures of the gas turbine plant.

  20. State geothermal commercialization programs in seven Rocky Mountain states. Semiannual progress report, July-December 1980

    Energy Technology Data Exchange (ETDEWEB)

    Lunis, B. C.; Toth, W. J. [comps.

    1981-10-01

    The activities and findings of the seven state commercialization teams participating in the Rocky Mountain Basin and Range commercialization program are described. Background information is provided; program objectives and the technical approach that is used are discussed; and the benefits of the program are described. The summary of findings is presented. Prospect identification, area development plans, site specific development analyses, time-phased project plans, the aggregated prospective geothermal energy use, and institutional analyses are discussed. Public outreach activities are covered and findings and recommendations are summarized. The commercialization activities carried out by the respective state teams are described for the following: Colorado, Montana, New Mexico, North Dakota, South Dakota, Utah, and Wyoming.

  1. Review of DOE Waste Package Program. Semiannual report, October 1984-March 1985. Volume 8

    Energy Technology Data Exchange (ETDEWEB)

    Davis, M.S. (ed.)

    1985-12-01

    A large number of technical reports on waste package component performance were reviewed over the last year in support of the NRC`s review of the Department of Energy`s (DOE`s) Environmental Assessment reports. The intent was to assess in some detail the quantity and quality of the DOE data and their relevance to the high-level waste repository site selection process. A representative selection of the reviews is presented for the salt, basalt, and tuff repository projects. Areas for future research have been outlined. 141 refs.

  2. HTGR Generic Technology Program. Semiannual report for the period ending September 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    1980-11-01

    This document reports the technical accomplishments on the HTGR Generic Technology Program at General Atomic during the second half of FY-80. It covers a period when the design direction of the National HTGR Program is in the process of an overall review. The HTGR Generic Technology Program activities have continued so as to provide the basic technology required for all HTGR applications. The activities include the need to develop an LEU fuel and the need to qualify materials and components for the higher temperatures of the gas turbines and process heat plants.

  3. HTGR Generic Technology Program. Semiannual report for the period ending September 30, 1979

    Energy Technology Data Exchange (ETDEWEB)

    1979-11-01

    The technical accomplishments on the HTGR Generic Technology Program at General Atomic during the second half of FY-79 are reported. The report covers a period when the major design direction of the National HTGR Program is in the process of changing from the HTGR-SC emphasis to an HTGR-GT emphasis in the near term. The HTGR Generic Technology Program activities have been redirected to ensure that the tasks covered are supportive of this changing emphasis in HTGR applications. The activities include the need to develop an MEU fuel, and the need to qualify materials and components for the higher temperatures of the gas turbine plant.

  4. Global Networks of Expertise

    DEFF Research Database (Denmark)

    Hansen, Annette Skovsted

    2013-01-01

    One significant and often overlooked outcome of technical assistance and overseas capacity development programs is the inclusion of experts from the South in overseas networks. Today more than half a million people from current and former developing countries in Asia, Africa, Latin America, and E...

  5. GPHS-RTGs in support of the Cassini mission. Semi-annual technical report, 29 March 1993--26 September 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-10-24

    The following tasks were reported on: Spacecraft integration and liaison, engineering support, safety, qualified unicouple fabrication, ETG fabrication/assembly/test, ground support equipment, RTG shipping and launch support, designs/reviews/mission applications, project management/quality assurance/contract changes.

  6. Semi-Annual Technical Progress Report of Radioisotope Power System Materials Production and Technology Program Tasks for October 1, 2001 Through March 31, 2002

    Energy Technology Data Exchange (ETDEWEB)

    J. P. Moore, JPM

    2002-05-22

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. For the Cassini Mission, for example, ORNL was involved in the production of carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS). This report has been divided into three sections to reflect program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2002. The first section deals primarily with maintenance of the capability to produce flight quality (FQ) CBCF insulator sets, iridium alloy blanks and foil, and CVS. In all three cases, production maintenance is assured by the manufacture of limited quantities of FQ components. The second section deals with several technology activities to improve the manufacturing processes, characterize materials, or to develop technologies for new radioisotope power systems. The last section is dedicated to studies related to the production of {sup 238}Pu.

  7. The development of coal-based technologies for Department of Defense facilities. Semiannual technical progress report, September 28, 1992--March 27, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Scaroni, A.W.; Hogg, R. [and others

    1993-05-13

    The US Department of Defense (DOD), through an Interagency Agreement with the US Department of Energy (DOE), has initiated a three-phase program with the Consortium for Coal-Water Slurry Fuel Technology, with the aim of decreasing DOD`s reliance on imported oil by increasing its use of coal. The program is being conducted as a cooperative agreement between the Consortium and DOE and the first phase of the program is underway. Phase I activities are focused on developing clean, coal-based combustion technologies for the utilization of both micronized coal-water mixtures (MCWMs) and dry, micronized coal (MC) in fuel oil-designed industrial boilers. Phase II research and development activities will continue to focus on industrial boiler retrofit technologies by addressing emissions control and pre-combustion (i.e., slagging combustion and/or gasification) strategies for the utilization of high ash and high sulfur coals. Phase III activities will examine coal-based fuel combustion systems that cofire wastes. Each phase includes an engineering cost analysis and technology assessment. The activities and status of Phase I are described below. The objective in Phase I is to deliver fully engineered retrofit options for a fuel oil- designed watertube boiler located on a DOD installation to fire either MCWM or MC. This will be achieved through a program consisting of the following five tasks: (1) Coal Beneficiation and Preparation; (2) Combustion Performance Evaluation; (3) Engineering Design; (4) Engineering and Economic Analysis; (5) Final Report/Submission of Design Package.

  8. Development of coal-based technologies for Department of Defense Facilities. Semiannual technical progress report, September 28, 1996--March 27, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Miller, S.F.; Pisupati, S.V. [and others

    1997-07-22

    The U.S. Department of Defense (DOD), through an Interagency Agreement with the U.S. Department of Energy (DOE), has initiated a three-phase program with the Consortium for Coal-Water Slurry Fuel Technology, with the aim of developing technologies which can potentially decrease DOD`s reliance on imported oil by increasing its use of coal. The program is being conducted as a cooperative agreement between the Consortium and DOE. Work in Phase II focused on emissions reductions, coal beneficiation/preparation studies, and economic analyses of coal use. Work in Phase III focused on coal preparation studies, pilot-scale NO{sub x} reduction studies, economic analyses of coal use, and evaluation of deeply-cleaned coal as boiler fuel. Coal preparation studies were focused on continuing activities on particle size control, physical separations, surface-based separation processes, and dry processing. Preliminary pilot-scale NO{sub x} reduction catalyst tests were conducted when firing natural gas in Penn State`s down-fired combustor. This is the first step in the scale-up of bench-scale results obtained in Phase II to the demonstration boiler scale when firing coal. The economic study focused on community sensitivity to coal usage, regional/national economic impacts of new coal utilization technologies, and constructing a national energy portfolio. The evaluation of deeply-cleaned coal as boiler fuel included installing a ribbon mixer into Penn State`s micronized coal-water mixture circuit for reentraining filter cake. In addition, three cleaned coals were received from CQ Inc. and three cleaned coals were received from Cyprus-Amax.

  9. ARPA-NRL Laser Program - Semiannual Technical Report to Defense Advanced Research Projects Agency, 1 January 1974-30 June 1974

    Science.gov (United States)

    1975-04-01

    various properties of the laser gas and the gain measurement wavelength. The derivation of this equation is given in a later section of this...EST % 1.875 x in" 17 A J/Ä f 12) Combining equations (10) and (12) we obtain ^ST = 0.24 p nt J/£ (13) For...The laser emission was attenuated by passing the beam through a short focal length lens and a ND2 filter, llg lines were used in the wavelength

  10. GPHS-RTGs in support of the Cassini Mission. Semi-annual technical progress report, April 3, 1995--October 1, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-24

    This document is the April-October 1995 Progress Report on the Cassini RTG Program. Nine tasks are summarized; (1) Spacecraft integration and liason, (2) Engineering support, (3) Safety, (4) Unicouple fabrication, (5) ETG fabrication, assembly, and test, (6) Ground support equipment, (7) RTG shipping and launch support, (8) Design, reviews, and mission applications, and (9) Project management, QA, contract changes, and material acquisitions.

  11. The development of coal-based technologies for Department of Defense facilities. Semiannual technical progress report, March 28, 1994--September 27, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Bartley, D.A.; Morrison, J.L. [and others

    1995-04-14

    The US Department of Defense (DOD), through an Interagency Agreement with the US Department of Energy (DOE), has initiated a three-phase program with the Consortium for Coal Water Slurry Fuel Technology, with the aim of decreasing DOD`s reliance on imported oil by increasing its use of coal. The program is being conducted as a cooperative agreement between the Consortium and DOE and the first two phases of the program are underway. Activities this reporting period included performing coal beneficiation/preparation studies, conducting combustion performance evaluations, preparing retrofit engineering designs, determining retrofit economics, and installing a micronized coal-water mixture (MCWM) circuit.

  12. Semi-Annual Technical Progress Report of Radioisotope Power System Materials Production and Technology Program Tasks for April 1, 2002 Through September 20, 2002

    Energy Technology Data Exchange (ETDEWEB)

    Moore, J.P.

    2002-12-03

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. For the Cassini Mission, for example, ORNL was involved in the production of carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS). This report has been divided into three sections to reflect program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2002. The first section deals primarily with maintenance of the capability to produce flight quality (FQ) CBCF insulator sets, iridium alloy blanks and foil, and CVS. In all three cases, production maintenance is assured by the manufacture of limited quantities of FQ components. The second section deals with several technology activities to improve the manufacturing processes, characterize materials, or to develop technologies for new radioisotope power systems. The last section is dedicated to studies related to the production of {sup 238}Pu.

  13. [Evaluation of high-efficiency gas-liquid contactors for natural gas processing]. Semiannual technical progress report, October 1, 1992--March 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-01

    The objective of this proposed program is to evaluate the potential of rotating gas-liquid contactors for natural gas processing by expanding the currently available database. This expansion will focus on application of this technology to environments representative of those typically encountered in natural gas processing plants. Operational and reliability concerns will be addressed while generating pertinent engineering data relating to the mass-transfer process. This report presents results on fluid dynamics and mass transfer coefficient studies.

  14. The development of coal-based technologies for Department of Defense facilities. Semiannual technical progress report, March 28, 1995--September 27, 1995

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Hatcher, P.; Knicker, H. [Pennsylvania State Univ., University Park, PA (United States). Energy and Fuels Research Center] [and others

    1996-10-21

    The U.S. Department of Defense (DOD), through the Interagency Agreement with the U.S. Department of Energy (DOE), has initiated a three-phase program with the Consortium for Coal-Water Mixture Technology, with the aim of decreasing DOD`s reliance on imported oil by increasing its use of coal. The program is being conducted as a cooperative agreement between the Consortium and DOE. Activities this reporting period are summarized by phase. During this reporting period, preparation of the Phase I final report continued. Work on Phase II focused on emissions reductions, coal beneficiation/preparation studies, and economic analyses of coal use. Emissions reductions investigations included initiating a study to identify appropriate SO{sub 2} and NO{sub x} control technologies for coal-fired industrial boilers. In addition, work started on the design of a ceramic filtering device for installation on the demonstration boiler. The ceramic filter device will be used to demonstrate a more compact and efficient filtering device for retrofit applications. Coal preparation and utilization activities, and the economic analysis were completed and work focused on preparing the final report. Work on Phase III focused on coal preparation studies and economic analyses of coal use. Coal preparation studies were focused on continuing activities on particle size control, physical separations, surface-based separation processes, and dry processing. The economic study focused on selecting incentives for commercialization of coal using technologies, community sensitivity to coal usage, regional economic impacts of new coal utilization technologies, and constructing a national energy portfolio.

  15. The development of coal-based technologies for Department of Defense facilities. Semiannual technical progress report, September 28, 1993--March 27, 1994

    Energy Technology Data Exchange (ETDEWEB)

    Miller, B.G.; Morrison, J.L.; Sharifi, R.; Shepard, J.F.; Scaroni, A.W.; Hogg, R.; Chander, S.; Cho, H.; Ityokumbul, M.T.; Klima, M.S. [and others

    1994-11-30

    The U.S. Department of Defense (DOD), through an Interagency Agreement with the U.S. Department of Energy (DOE), has initiated a three-phase program with the Consortium for Coal-Water Slurry Fuel Technology, with the aim of decreasing DOD`s reliance on imported oil by increasing its use of coal. The program is being conducted as a cooperative agreement between the Consortium and DOE and the first two phases of the program are underway. To achieve the objectives of the program, a team of researchers was assembled. Phase I activities are focused on developing clean, coal-based combustion technologies for the utilization of both micronized coal-water slurry fuels (MCWSFS) and dry, micronized coal (DMC) in fuel oil-designed industrial boilers. Phase II research and development activities will continue to focus on industrial boiler retrofit technologies by addressing emissions control and precombustion (i.e., slagging combustion and/or gasification) strategies for the utilization of high ash, high sulfur coals. Phase III activities will examine coal-based fuel combustion systems that cofire wastes. Each phase includes an engineering cost analysis and technology assessment. The activities and status of Phases I and II are described below. The objective in Phase I is to deliver fully engineered retrofit options for a fuel oil-designed watertube boiler located on a DOD installation to fire either MCWSF or DMC. This will be achieved through a program consisting of the following five tasks: (1) Coal Beneficiation and Preparation; (2) Combustion Performance Evaluation; (3) Engineering Design; (4) Engineering and Economic Analysis; and (5) Final Report/Submission of Design Package.

  16. Cermet composite thermal spray coatings for erosion and corrosion protection in combustion environments of advanced coal-fired boilers. Semiannual technical report, January 14, 1997--August 14, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Schorr, B.S.; Levin, B.F.; DuPont, J.N.; Marder, A.R.

    1997-08-31

    Research is presently being conducted to determine the optimum ceramic/metal combination in thermally sprayed metal matrix composite coatings for erosion and corrosion resistance in new coal-fired boilers. The research will be accomplished by producing model cermet composites using powder metallurgy and electrodeposition methods in which the effect of ceramic/metal combination for the erosion and corrosion resistance will be determined. These results will provide the basis for determining the optimum hard phase constituent size and volume percent in thermal spray coatings. Thermal spray coatings will be applied by our industrial sponsor and tested in our erosion and corrosion laboratories. Bulk powder processed Ni-Al{sub 2}O{sub 3} composites were produced at Idaho National Engineering Laboratory. The composite samples contained 0, 21, 27, 37, and 45 volume percent Al{sub 2}O{sub 3} with an average particle size of 12 um. Also, to deposit model Ni-Al{sub 2}O{sub 3} coatings, an electrodeposition technique was developed and coatings with various volume fractions (0-35%) of Al{sub 2}O{sub 3} were produced. The powder and electrodeposition processing of Ni-Al{sub 2}O{sub 3} Composites provide the ability to produce two phase microstructure without changing the microstructure of the matrix material. Therefore, the effect of hard second phase particles size and volume fraction on erosion resistance could be analyzed.

  17. Semi-Annual Technical Progress Report of the Radioisotope Power System Materials Production and Technology Program Tasks for September 2000 through March 2001

    Energy Technology Data Exchange (ETDEWEB)

    Moore, J.P.

    2001-05-22

    The Office of Space and Defense Power Systems of the Department of Energy (DOE) provides Radioisotope Power Systems (RPS) for applications where conventional power systems are not feasible. For example, radioisotope thermoelectric generators were supplied by the DOE to the National Aeronautics and Space Administration for deep space missions including the Cassini Mission launched in October of 1997 to study the planet Saturn. The Oak Ridge National Laboratory (ORNL) has been involved in developing materials and technology and producing components for the DOE for more than three decades. For the Cassini Mission, for example, ORNL was involved in the production of carbon-bonded carbon fiber (CBCF) insulator sets, iridium alloy blanks and foil, and clad vent sets (CVS) and weld shields (WS). This report has been divided into three sections to reflect program guidance from the Office of Space and Defense Power Systems for fiscal year (FY) 2001. The first section deals primarily with maintenance of the capability to produce flight quality (FQ) CBCF insulator sets, iridium alloy blanks and foil, CVS, and WS. In all three cases, production maintenance is assured by the manufacture of limited quantities of FQ components. The second section deals with several technology activities to improve the manufacturing processes, characterize materials. or to develop technologies for new radioisotope power systems. The last section is dedicated to studies related to the production of {sup 238}Pu.

  18. Spring-fall asymmetry of substorm strength, geomagnetic activity and solar wind: Implications for semiannual variation and solar hemispheric asymmetry

    Science.gov (United States)

    Marsula, K.; Tanskanen, E.; Love, J.J.

    2011-01-01

    We study the seasonal variation of substorms, geomagnetic activity and their solar wind drivers in 1993–2008. The number of substorms and substorm mean duration depict an annual variation with maxima in Winter and Summer, respectively, reflecting the annual change of the local ionosphere. In contradiction, substorm mean amplitude, substorm total efficiency and global geomagnetic activity show a dominant annual variation, with equinoctial maxima alternating between Spring in solar cycle 22 and Fall in cycle 23. The largest annual variations were found in 1994 and 2003, in the declining phase of the two cycles when high-speed streams dominate the solar wind. A similar, large annual variation is found in the solar wind driver of substorms and geomagnetic activity, which implies that the annual variation of substorm strength, substorm efficiency and geomagnetic activity is not due to ionospheric conditions but to a hemispherically asymmetric distribution of solar wind which varies from one cycle to another. Our results imply that the overall semiannual variation in global geomagnetic activity has been seriously overestimated, and is largely an artifact of the dominant annual variation with maxima alternating between Spring and Fall. The results also suggest an intimate connection between the asymmetry of solar magnetic fields and some of the largest geomagnetic disturbances, offering interesting new pathways for forecasting disturbances with a longer lead time to the future.

  19. Socio-technical Betwixtness

    DEFF Research Database (Denmark)

    Bossen, Claus

    2017-01-01

    the intrinsically social and technical interwovenness of design, and the necessity of including affected people and stakeholders in the design process. This betwixtness of socio-technical design is demonstrated by the analysis of two IT systems for healthcare: a foundational model for electronic healthcare records......This chapter focusses on two challenges for socio-technical design: Having to choose between different rationales for design, and the adequate understanding and depiction of the work to be redesigned. These two challenges betwixt the otherwise strong tenets of socio-technical design of pointing out......, and an IT system organizing hospital porters’ work. The conceptual background for the analysis of the cases is provided by a short introduction to different rationales for organizational design, and by pointing to the differences between a linear, rationalistic versus an interactional depiction of work....

  20. Superfund Technical Assistance Grants

    Data.gov (United States)

    U.S. Environmental Protection Agency — This asset includes data related to the Superfund Technical Assistance Grant program, including grant number, award amounts, award dates, period of performance,...

  1. NCDC Technical Reports

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NCDC Technical Reports is a set of retrospective analyses produced by the Research Customer Service Group and the National Climatic Data Center from 1995 to 2008....

  2. Applying technical versatility

    Energy Technology Data Exchange (ETDEWEB)

    None

    1970-01-01

    The breadth and depth of the diversified technical programs at Mound Laboratory since its inception are characterized by a record of competence and versatility during the past generation. A spectrum of mission assignments has been completed successfully in such diverse technical areas as process development and manufacturing of explosive components, research on fuels for the Civilian Power Reactor Program, separation of radioactive materials, fabrication of radioisotopic heat sources, stable gaseous isotope separation and purification, and many other areas. Mound Laboratory is one of the key U.S. Atomic Energy Commission sites that has demonstrated its technical competence in both weapons and non-weapons activities. This report has been prepared to complement the AEC’s vigorous program of scientific information dissemination. Three broad areas of technical competence are highlighted here: explosive technology, radionuclide technology, and stable gaseous isotope separation, which encompass a broad variety of techniques and supporting disciplines.

  3. Technical report writing today

    CERN Document Server

    Riordan, Daniel G

    2014-01-01

    "Technical Report Writing Today" provides thorough coverage of technical writing basics, techniques, and applications. Through a practical focus with varied examples and exercises, students internalize the skills necessary to produce clear and effective documents and reports. Project worksheets help students organize their thoughts and prepare for assignments, and focus boxes highlight key information and recent developments in technical communication. Extensive individual and collaborative exercises expose students to different kinds of technical writing problems and solutions. Annotated student examples - more than 100 in all - illustrate different writing styles and approaches to problems. Numerous short and long examples throughout the text demonstrate solutions for handling writing assignments in current career situations. The four-color artwork in the chapter on creating visuals keeps pace with contemporary workplace capabilities. The Tenth Edition offers the latest information on using electronic resum...

  4. Technical knowledge creation

    DEFF Research Database (Denmark)

    Søberg, Peder Veng

    2017-01-01

    Purpose - The purpose of the paper is to amend shortcomings of existing theory concerning organizational learning and knowledge management. Design/methodology/approach – The paper reviews and refines existing theory. Findings - Findings from cognitive neuroscience suggest that technical knowledge...

  5. OSH technical reference manual

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    In an evaluation of the Department of Energy (DOE) Occupational Safety and Health programs for government-owned contractor-operated (GOCO) activities, the Department of Labor`s Occupational Safety and Health Administration (OSHA) recommended a technical information exchange program. The intent was to share written safety and health programs, plans, training manuals, and materials within the entire DOE community. The OSH Technical Reference (OTR) helps support the secretary`s response to the OSHA finding by providing a one-stop resource and referral for technical information that relates to safe operations and practice. It also serves as a technical information exchange tool to reference DOE-wide materials pertinent to specific safety topics and, with some modification, as a training aid. The OTR bridges the gap between general safety documents and very specific requirements documents. It is tailored to the DOE community and incorporates DOE field experience.

  6. Self-organizing networks

    DEFF Research Database (Denmark)

    Marchetti, Nicola; Prasad, Neeli R.; Johansson, Johan

    2010-01-01

    In this paper, a general overview of Self-Organizing Networks (SON), and the rationale and state-of-the-art of wireless SON are first presented. The technical and business requirements are then briefly treated, and the research challenges within the field of SON are highlighted. Thereafter......, the relation between SON and Cognitive Networks (CN) is covered. At last, the application of Algorithmic Information Theory (AIT) as a possible theoretical tool to support SON in addressing the growing complexity of networks is discussed....

  7. Retention of technical professionals

    OpenAIRE

    2012-01-01

    M.Ing. The loss of skills and knowledge of technical professionals experienced by many organizations in South Africa has serious implications on the competitiveness of these organizations in the local and international markets. Organizations should come to realize that they should find creative ways to retain critical skills and knowledge and ensure continuity in terms of succession management. Technical professionals play a crucial role in society. They are responsible for maintaining the...

  8. 21 May 2013 - Greek Minister of Health A. Lykouretzos signing the guest book with CERN Director-General R. Heuer; visiting the LHC tunnel at POint 5 and CMS experimental cavern with Deputy Spokesperson T. Camporesi. CERN-HERMES Network Technical Coordinator E. Dimovasili; Life Sciences Adviser M. Dosanjh; National Contact Physicist, ATLAS Collaboration, NTU, Athens E. Gazis and International Relations Adviser R. Voss accompany the delegation throughout.

    CERN Multimedia

    Anna Pantelia

    2013-01-01

    21 May 2013 - Greek Minister of Health A. Lykouretzos signing the guest book with CERN Director-General R. Heuer; visiting the LHC tunnel at POint 5 and CMS experimental cavern with Deputy Spokesperson T. Camporesi. CERN-HERMES Network Technical Coordinator E. Dimovasili; Life Sciences Adviser M. Dosanjh; National Contact Physicist, ATLAS Collaboration, NTU, Athens E. Gazis and International Relations Adviser R. Voss accompany the delegation throughout.

  9. Special Inspector General for Iraq Reconstruction. Quarterly Report and Semiannual Report to the United States Congress

    Science.gov (United States)

    2008-07-30

    ACTIVITY: • Outputs include seeds, beans, and potatoes , palm groves, citrus and other fruits, animals and poultry, and glass and ceramics...SIGIR INSPECTIONS water treatment plant was to contain a reverse osmosis unit, an above-ground storage reservoir, a pipe network connecting to the...the type, sizes, and specifi cations of the proposed reverse osmosis unit was provided. Using a proactive approach, the U.S. Army Corps of

  10. 78 FR 27963 - Reliability Technical Conference; Notice of Technical Conference

    Science.gov (United States)

    2013-05-13

    ... Energy Regulatory Commission Reliability Technical Conference; Notice of Technical Conference Take notice that the Federal Energy Regulatory Commission will hold a Technical Conference on Tuesday, July 9, 2013... to the webcast. The Capitol Connection provides technical support for webcasts and offers the option...

  11. Spacecraft Fabrication and Test MODIL. Semiannual report, March 1992--October 1992

    Energy Technology Data Exchange (ETDEWEB)

    Saito, T.T.; Spellman, G.P.; Sanders, D.M.; Griffith, L.V.; Cruz, G.E.

    1993-05-01

    The Spacecraft Fabrication and Test (SF&T) MODIL is off to a good start to achieve its objective of establishing a producibility culture in the spacecraft fabrication community. The MODIL has been organized into five thrust areas: Automated Spacecraft & Assembly Project (ASAP) Materials and Structures; Cryocoolers; Precision Technologies; Assembly and Test. In this six months of effort, we have established significant initiatives with the aerospace industry and government laboratories. We continue to, look to the Aerospace Corporation for significant technical support and advice. We have been key participants in the Producible Technology Working Groups (PTWGs) set fact hosted a plenary meeting for the PTWGs before the GBI visits in March. In addition to defining potential high payoff areas, some contractual work has been initiated to execute demonstration projects. The purpose of the demonstration potential payoff to SDIO in the specific areas and position the program on a larger scale after receipt of the FY93 funding. We held our first industrial briefing.

  12. Local dependency in networks

    Directory of Open Access Journals (Sweden)

    Kudĕlka Miloš

    2015-06-01

    Full Text Available Many real world data and processes have a network structure and can usefully be represented as graphs. Network analysis focuses on the relations among the nodes exploring the properties of each network. We introduce a method for measuring the strength of the relationship between two nodes of a network and for their ranking. This method is applicable to all kinds of networks, including directed and weighted networks. The approach extracts dependency relations among the network’s nodes from the structure in local surroundings of individual nodes. For the tasks we deal with in this article, the key technical parameter is locality. Since only the surroundings of the examined nodes are used in computations, there is no need to analyze the entire network. This allows the application of our approach in the area of large-scale networks. We present several experiments using small networks as well as large-scale artificial and real world networks. The results of the experiments show high effectiveness due to the locality of our approach and also high quality node ranking comparable to PageRank.

  13. Conference Proceedings of International High Speed Networks for Scientific and Technical Information, Held at Ottawa, Canada on 6-7 October 1993 (Les Reseaux Internationaux Rapides D’Echange D’Information Scientifique et Technique)

    Science.gov (United States)

    1994-02-01

    34, in 4th Joint [101 Rios, Y., "Catdlogos en lines de acceso p.blico: European Networking Conference, May 10-13, 1993 seleccifn bibliogrifica...Networking 93, [81 Altuna, B., "El valor de la informacion desde la London, May 1993, ISBN 0-88736-936-7. perspectiva del usuario y el papel de las...bibliotecas y unidades de informacion en ia empresa", Documentaci6n Cientifica, Jul-Sep 1992, ISSN 0210-0614. li-I TRAINING & OPERATIONS SUPPORT SYSTEM

  14. High-Performance Networking

    CERN Document Server

    CERN. Geneva

    2003-01-01

    The series will start with an historical introduction about what people saw as high performance message communication in their time and how that developed to the now to day known "standard computer network communication". It will be followed by a far more technical part that uses the High Performance Computer Network standards of the 90's, with 1 Gbit/sec systems as introduction for an in depth explanation of the three new 10 Gbit/s network and interconnect technology standards that exist already or emerge. If necessary for a good understanding some sidesteps will be included to explain important protocols as well as some necessary details of concerned Wide Area Network (WAN) standards details including some basics of wavelength multiplexing (DWDM). Some remarks will be made concerning the rapid expanding applications of networked storage.

  15. Technical Evaluation Report

    National Research Council Canada - National Science Library

    Werkhoven, Peter

    2007-01-01

    ...). Increased computer power at low cost, wireless networks, miniaturization of sensor and computer components, and better visual, auditory and tactile display systems are contributing to the maturation...

  16. Technical Evaluation Report

    National Research Council Canada - National Science Library

    Werkhoven, Peter

    2006-01-01

    ...). Increased computer power at low cost, wireless networks, miniaturizations of sensor and computer components, and better visual, auditory and tactile display systems are contributing to the maturation...

  17. Learning Networks, Networked Learning

    NARCIS (Netherlands)

    Sloep, Peter; Berlanga, Adriana

    2010-01-01

    Sloep, P. B., & Berlanga, A. J. (2011). Learning Networks, Networked Learning [Redes de Aprendizaje, Aprendizaje en Red]. Comunicar, XIX(37), 55-63. Retrieved from http://dx.doi.org/10.3916/C37-2011-02-05

  18. Technical training - Places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Availability Certified LabVIEW Associate Developer (CLAD) 06-Dec-12 to 06-Dec-12 1 hour English One more place available Compatibilité électromagnetique (CEM): Applications 23-Nov-12 to 23-Nov-12 3.5 hours English 3 places available Compatibilité électromagnétique (CEM): Introduction 23-Nov-12 to 23-Nov-12 3 hours English 43 places available Effets des Radiations sur les composants et systèmes électroniques 11-Dec-12 to 12-Dec-12 1 day 4 hours French 9 places available LabVIEW for beginners ...

  19. Technical training: places available

    CERN Multimedia

    2013-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924)   Electronics design Next Session Duration Language Introduction to VHDL 21-Feb-13 to 22-Feb-13 2 days English Mechanical design Next Session Duration Language ANSYS - Introduction à ANSYS Mechanical APDL 04-Feb-13 to 07-Feb-13 4 days English Applications de la cotation fonctionnelle et du langage ISO 06-Feb-13 to 08-Feb-13 2 days 4 hours French CATIA V5 – Surfacique 14-Jan-13 to 15-Jan-13 2 days French Office software Next Session Duration Language ACCESS 2010 - niveau 2 : ECDL 06-Feb-13 to 07-Feb-13 2 days French Dreamweaver CS3 - Niveau 1 14-Jan-13 to 15-Jan-13 2 d...

  20. Technical training - places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department »Electronics design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 3 places available Foundations of Electromagnetism and Magnet Design (EMAG) 14-Nov-12 to 27-Nov-12 6 days English 20 places available Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 15 places available Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 7 places available LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places available »Mechanical design Next Se...

  1. Fuel Element Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Burley, H.H. [ed.

    1956-08-01

    It is the purpose of the Fuel Element Technical Manual to Provide a single document describing the fabrication processes used in the manufacture of the fuel element as well as the technical bases for these processes. The manual will be instrumental in the indoctrination of personnel new to the field and will provide a single data reference for all personnel involved in the design or manufacture of the fuel element. The material contained in this manual was assembled by members of the Engineering Department and the Manufacturing Department at the Hanford Atomic Products Operation between the dates October, 1955 and June, 1956. Arrangement of the manual. The manual is divided into six parts: Part I--introduction; Part II--technical bases; Part III--process; Part IV--plant and equipment; Part V--process control and improvement; and VI--safety.

  2. Semiannual progress report for the Idaho Geothermal Program, April 1 to September 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Ihrig, R.R. (ed.)

    1981-03-01

    The completion of the 5-MW Pilot Power Plant at the Raft River Geothermal Test Site, modification of the similar, binary cycle Prototype Power Plant, and the water treatment program that studies environmentally safe ways to inhibit corrosion and scaling in geothermal power plants and investigates corrosion resistant materials are summarized. Studies of binary geothermal cycles using mixed hydrocarbon working fluids are described as part of the continuing search for ways to produce low-cost electricity from moderate-temperature geothermal fluids. Progress is reported on studies of direct contact heat exchanger concepts, heat rejection systems, and primary heat exchangers with augmentation. As part of the now-ended series of aquaculture experiments, an unsuccessful attempt to incubate common carp embryos in geothermal waters is reported. An experiment in revegetating disturbed land at Raft River is mentioned and progress on DOE's new User Coupled Confirmation Drilling Program is described. An estimate is presented of the amount of hydrothermal energy that could be produced by the year 2000, with and without Federal assistance, for electric generation and direct applications such as industrial process heat. Progress is reported on the Marketing Assistance Program, through which technical information and assistance is provided potential users and developers of geothermal resources. Also reported is progress in DOE's Program Opportunity Notice (PON) Program demonstration projects and Program Research and Development Announcement (PRDA) Program study projects.

  3. Transformation of technical infrastructure

    DEFF Research Database (Denmark)

    Nielsen, Susanne Balslev

    , the evolution of large technological systems and theories about organisational and technological transformationprocesses. The empirical work consist of three analysis at three different levels: socio-technical descriptions of each sector, an envestigation of one municipality and envestigations of one workshop......The scope of the project is to investigate the possibillities of - and the barriers for a transformation of technical infrastructure conserning energy, water and waste. It focus on urban ecology as a transformation strategy. The theoretical background of the project is theories about infrastructure...

  4. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    You are running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  5. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2009-01-01

    Are you running Vista on your new PC – or are you planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual session of this course will take place on 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  6. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    Are you running Vista on your new PC – or are you planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at mailto:Technical.Training@cern.ch

  7. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    You are running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced using Windows XP. The next bilingual sessions of this course will take place on December 12, 2008 and January 30, 2009. Register using our catalogue : http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at Technical.Training@cern.ch

  8. CERN Technical Training : Vista !

    CERN Multimedia

    HR Department

    2008-01-01

    Are you running Vista on your new PC – or are planning to install it? The Technical Training service is organizing a half-day training course on the new features of the VISTA operating system. This course introduces the new interfaces and presents the new functionalities for people who are experienced in the use of Windows XP. The next bilingual sessions of this course will take place on 12 December 2008 and 30 January 2009. Register using our catalogue: http://cta.cern.ch/cta2/f?p=110:9 or contact us with your questions/comments at Technical.Training@cern.ch

  9. KSC Technical Capabilities Website

    Science.gov (United States)

    Nufer, Brian; Bursian, Henry; Brown, Laurette L.

    2010-01-01

    This document is the website pages that review the technical capabilities that the Kennedy Space Center (KSC) has for partnership opportunities. The purpose of this information is to make prospective customers aware of the capabilities and provide an opportunity to form relationships with the experts at KSC. The technical capabilities fall into these areas: (1) Ground Operations and Processing Services, (2) Design and Analysis Solutions, (3) Command and Control Systems / Services, (4) Materials and Processes, (5) Research and Technology Development and (6) Laboratories, Shops and Test Facilities.

  10. Optical network democratization.

    Science.gov (United States)

    Nejabati, Reza; Peng, Shuping; Simeonidou, Dimitra

    2016-03-06

    The current Internet infrastructure is not able to support independent evolution and innovation at physical and network layer functionalities, protocols and services, while at same time supporting the increasing bandwidth demands of evolving and heterogeneous applications. This paper addresses this problem by proposing a completely democratized optical network infrastructure. It introduces the novel concepts of the optical white box and bare metal optical switch as key technology enablers for democratizing optical networks. These are programmable optical switches whose hardware is loosely connected internally and is completely separated from their control software. To alleviate their complexity, a multi-dimensional abstraction mechanism using software-defined network technology is proposed. It creates a universal model of the proposed switches without exposing their technological details. It also enables a conventional network programmer to develop network applications for control of the optical network without specific technical knowledge of the physical layer. Furthermore, a novel optical network virtualization mechanism is proposed, enabling the composition and operation of multiple coexisting and application-specific virtual optical networks sharing the same physical infrastructure. Finally, the optical white box and the abstraction mechanism are experimentally evaluated, while the virtualization mechanism is evaluated with simulation. © 2016 The Author(s).

  11. A network of networks.

    Science.gov (United States)

    Iedema, Rick; Verma, Raj; Wutzke, Sonia; Lyons, Nigel; McCaughan, Brian

    2017-04-10

    Purpose To further our insight into the role of networks in health system reform, the purpose of this paper is to investigate how one agency, the NSW Agency for Clinical Innovation (ACI), and the multiple networks and enabling resources that it encompasses, govern, manage and extend the potential of networks for healthcare practice improvement. Design/methodology/approach This is a case study investigation which took place over ten months through the first author's participation in network activities and discussions with the agency's staff about their main objectives, challenges and achievements, and with selected services around the state of New South Wales to understand the agency's implementation and large system transformation activities. Findings The paper demonstrates that ACI accommodates multiple networks whose oversight structures, self-organisation and systems change approaches combined in dynamic ways, effectively yield a diversity of network governances. Further, ACI bears out a paradox of "centralised decentralisation", co-locating agents of innovation with networks of implementation and evaluation expertise. This arrangement strengthens and legitimates the role of the strategic hybrid - the healthcare professional in pursuit of change and improvement, and enhances their influence and impact on the wider system. Research limitations/implications While focussing the case study on one agency only, this study is unique as it highlights inter-network connections. Contributing to the literature on network governance, this paper identifies ACI as a "network of networks" through which resources, expectations and stakeholder dynamics are dynamically and flexibly mediated and enhanced. Practical implications The co-location of and dynamic interaction among clinical networks may create synergies among networks, nurture "strategic hybrids", and enhance the impact of network activities on health system reform. Social implications Network governance requires more

  12. The impact of two semiannual treatments with albendazole alone on lymphatic filariasis and soil-transmitted helminth infections: a community-based study in the Republic of Congo.

    Science.gov (United States)

    Pion, Sébastien D S; Chesnais, Cédric B; Bopda, Jean; Louya, Frédéric; Fischer, Peter U; Majewski, Andrew C; Weil, Gary J; Boussinesq, Michel; Missamou, François

    2015-05-01

    Implementation of mass drug administration (MDA) with ivermectin plus albendazole (ALB) for lymphatic filariasis (LF) has been delayed in central Africa because of the risk of serious adverse events in subjects with high Loa loa microfilaremia. We conducted a community trial to assess the impact of semiannual MDA with ALB (400 mg) alone on LF and soil-transmitted helminth (STH) infections in the Republic of Congo. Evaluation at 12 months showed that ALB MDA had not significantly reduced Wuchereria bancrofti antigenemia or microfilaria (mf) rates in the community (from 17.3% to 16.6% and from 5.3% to 4.2%, respectively). However, the geometric mean mf count in mf-positive subjects was reduced from 202.2 to 80.9 mf/mL (60% reduction, P = 0.01). The effect of ALB was impressive in 38 subjects who were mf-positive at baseline and retested at 12 months: 37% had total mf clearance, and individual mf densities were reduced by 73.0%. MDA also dramatically reduced the hookworm infection rate in the community from 6.5% to 0.6% (91% reduction), with less impressive effects on Ascaris and Trichuris. These preliminary results suggest that semiannual community MDA with ALB is a promising strategy for controlling LF and STH in areas with coendemic loiasis. © The American Society of Tropical Medicine and Hygiene.

  13. Task 8 - management and reporting. Semi-annual report April 1--September 30, 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    The task of restoring nuclear defense complex sites under the U.S. Department of Energy (DOE) Environmental Management (EM) program presents an unprecedented challenge to the environmental restoration community. Effective and efficient cleanup requires the timely development or modification of novel cleanup technologies applicable to radioactive wastes. Fostering the commercialization of these innovative technologies is the mission of EM-50, the EM Program Office of Science and Technology. DOE`s Morgantown Energy Technology Center (METC) pursues activities integral to the EM-50 mission through its Cooperative Agreement with the EM Office of Science and Technology. The advancement of innovative technologies is often arrested at the {open_quotes}valley of death,{close_quotes} the general term for barriers to demonstration and commercialization. Alternatively, commercialization and deployment are impacted by a lack of clear choices among competing technologies. The Energy & Environmental Research Center (EERC), a not-for-profit, contract-supported organization focused on research, development, demonstration, and commercialization (RDD&C) of energy and environmental technologies, is in the second year of a Cooperative Agreement with METC designed (1) to deliver EM technologies into the commercial marketplace through a unique combination of technical support, real-world demonstrations, and brokering; (2) to facilitate decisions regarding deployment and support for commercialization by providing comparative performance data through systems analysis; and (3) to support the integration and deployment of {open_quotes}winner{close_quotes} technologies at EM sites. These activities, along with program management, make up the four program areas of the METC-EERC EM Cooperative Agreement (EMCA): Technology Commercialization, Systems Engineering, Technology Integration, and Management and Reporting.

  14. Office of the Inspector General. Semiannual report, April 1, 1997--September 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    The following two sections highlight selected audits and investigations completed during this reporting period. More detailed summaries appear in subsequent sections of this report. (1) The NRC initiated a number of actions to address regulatory weaknesses. The OIG found that some of these actions may not produce a safety benefit commensurate with their cost. The OIG also found that meanings of several important regulatory terms are unclear to many NRC and licensee staff. The OIG believes a comprehensive, integrated plan could help focus agency resources on those issues with the most safety significance, and that a focus on plant safety will enhance the NRC`s credibility as an effective regulator. (2) Because of its wide-ranging potential impact, the OIG has been tracking the Year 2000 issue for some time. The OIG found that success of the NRC`s Year 2000 program could be enhanced. (3) In response to a memorandum from the NRC Chairman, the Acting Chief Financial Officer proposed an approach to developing an agency-wide, integrated financial management system. The OIG initiated an evaluation to identify and gain an understanding of the best practices for developing such a system, and recommended directions. The NRC sponsors a Federally Funded Research and Development Center (FFRDC) called the Center for Nuclear Waste Regulatory Analyses, which provides the NRC with long-term technical assistance and research related to the High-Level Waste program. The Federal Acquisition Regulation (FAR) requires that, prior to extending the contract for the FFRDC, sponsors conduct a comprehensive review of their use and need. The OIG found that the draft renewal justification assesses some, but not all, of the FAR considerations.

  15. Final Technical Report

    International Development Research Centre (IDRC) Digital Library (Canada)

    Tommy Ngai

    2014-03-31

    Mar 31, 2014 ... capacity building activities) to upgrade the technical and management capacities of governments and NGOs .... Furthermore, as described in the original proposal, CAWST provided practical perspectives in ..... when a funder or manager refuses to include important and central issues in the evaluation.

  16. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Real-Time (F) : 7 - 9.6.2005 (3 jours) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) Utilisation de fichiers PDF avec ACROBAT 6.0 : 20.6.2005 (1journée) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP : 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003 : 30.6.2005 (IT Technical Training Tutorial, free of charge) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoC...

  17. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: LabVIEW Migration 6 to 7: 14.6.2005 (1 day) IT3T/1 - Read your mail and more with Outlook 2003 : 14.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/2 - Creating, managing and using distribution lists with Simba2 : 16.6.2005 (IT Technical Training Tutorial, free of charge) FrontPage 2003 - niveau 2 : 16 & 17.6.2005 (2 jours) size="2">(1journée) Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Shor...

  18. TRANSLATING SERVICE TECHNICAL PROSE

    African Journals Online (AJOL)

    In addition to terminology, jargon and slang, technical texts are characterized by a particular style. An American manual of hand-to-hand fighting published during the Second World War contained the following instructions: What is so peculiarly sinister, says Kenneth. Hudson2, is the degree to which the lan!;Juage of.

  19. Artwork as Technics

    Science.gov (United States)

    Jackson, Mark

    2016-01-01

    "Artwork as technics" opens discussion on activating aesthetics in educational contexts by arguing that we require some fundamental revision in understanding relations between aesthetics and technology in contexts where education is primarily encountered instrumentally and technologically. The paper addresses this through the writing of…

  20. Routledge French technical dictionary

    CERN Document Server

    1994-01-01

    The French-English volume of this highly acclaimed set consists of some 100,000 keywords in both French and English, drawn from the whole range of modern applied science and technical terminology. Covers over 70 subject areas, from engineering and chemistry to packaging, transportation, data processing and much more.

  1. Technical Writing in Hydrogeology.

    Science.gov (United States)

    Tinker, John R., Jr.

    1986-01-01

    A project for Writing Across the Curriculum at the University of Wisconsin-Eau Claire is described as a method to relate the process of writing to the process of learning hydrology. The project focuses on an actual groundwater contamination case and is designed to improve the technical writing skills of students. (JN)

  2. Materials Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-08-01

    Roadmap identifying the efforts of the Materials Technical Team (MTT) to focus primarily on reducing the mass of structural systems such as the body and chassis in light-duty vehicles (including passenger cars and light trucks) which enables improved vehicle efficiency regardless of the vehicle size or propulsion system employed.

  3. Technical Entrepreneurship: A Symposium.

    Science.gov (United States)

    Cooper, Arnold C., Ed.; Komives, John L., Ed.

    Contained in this document are papers presented at the Symposium on Technical Entrepreneurship at Purdue University by researchers who were then or had previously been engaged in research in the area. Because formal research in this area was in its infancy, there was a particular need to afford investigators in the field opportunities to compare…

  4. Final technical report

    DEFF Research Database (Denmark)

    Juhl, Thomas Winther; Nielsen, Jakob Skov

    This project entails research with the goal to extend laser cutting of steel based metals to thickness above 20 mm and laser powers in the 10 kW range, with adequate accuracy and economically viable cutting speeds. The technical approach is to develop mirror based cutting heads with truly coaxial...

  5. Controller placement problem in industrial networks

    OpenAIRE

    Macián Ribera, Sergi

    2016-01-01

    SDN is the new trend in networks, for next Mobile and optical networks. Dimensioning, design and optimization of Software Defined Optical Networks. To be done at Technical University Munich (TUM) In this work the Controller Placement Problem (CPP) for SDN architecture is studied when it is applied to industrial networks. En este trabajo se estudia el problema CPP (controller placement problem) para la arquitectura SDN, aplicado a redes industriales. En aquest treball s'estudia el pro...

  6. The handbook of optical communication networks

    CERN Document Server

    Ilyas, Mohammad

    2003-01-01

    The Handbook of Optical Communication Networks presents comprehensive, up-to-date technical information on integrated, state-of-the-art optical networks. Beginning with an in-depth intoduction to the field, top international authorities explore every major aspect of optical networks, from basic concepts to research grade material. Their discussions cover all of the essential topics, including protocols, resource management, routing and wavelength assignment in WDM networks, connection management, survivability, enabling technologies, and future trends.

  7. Technological Developments in Networking, Education and Automation

    CERN Document Server

    Elleithy, Khaled; Iskander, Magued; Kapila, Vikram; Karim, Mohammad A; Mahmood, Ausif

    2010-01-01

    "Technological Developments in Networking, Education and Automation" includes a set of rigorously reviewed world-class manuscripts addressing and detailing state-of-the-art research projects in the following areas: Computer Networks: Access Technologies, Medium Access Control, Network architectures and Equipment, Optical Networks and Switching, Telecommunication Technology, and Ultra Wideband Communications. Engineering Education and Online Learning: including development of courses and systems for engineering, technical and liberal studies programs; online laboratories; intelligent

  8. Technical Support for the development of DCS

    Energy Technology Data Exchange (ETDEWEB)

    Oh, In Seok; Lee, Cheol Kwon; Kim, Dong Hoon; Kim, Jung Taek; Hwang, In Koo; Park, Jae Chang; Lee, Dong Young; Park, Won Man

    2008-05-15

    The objective of this project is to provide a technical support to Woori Tech Co. in its design and manufacture process of the DCS as a part of KNICS development program to promote the technology self-reliance for non-safety equipment for NPPs(Nuclear Power Plants). We support Woori Tech Co. to develop a DCS which satisfies the requirements for Shinkori 3 and 4 NPPs in the aspects of reliability, applicability and technical competitiveness. As the results of this project the following items were developed and/or implemented; {center_dot} Design basis and requirements for a DCS system {center_dot} Design requirements for control communication networks {center_dot} Architecture of control networks {center_dot} Design requirements of EWS(Engineering Workstation) {center_dot} Plan of software verification and validation {center_dot} Operation display design {center_dot} Soft control functions {center_dot} Application development tools of DCS {center_dot} Analysis and V/V activities on DCS control network protocols {center_dot} Software verification and validation and documentation guidelines {center_dot} User manual documents.

  9. The LILARTI neural network system

    Energy Technology Data Exchange (ETDEWEB)

    Allen, J.D. Jr.; Schell, F.M.; Dodd, C.V.

    1992-10-01

    The material of this Technical Memorandum is intended to provide the reader with conceptual and technical background information on the LILARTI neural network system of detail sufficient to confer an understanding of the LILARTI method as it is presently allied and to facilitate application of the method to problems beyond the scope of this document. Of particular importance in this regard are the descriptive sections and the Appendices which include operating instructions, partial listings of program output and data files, and network construction information.

  10. El Salvador - Formal Technical Education

    Data.gov (United States)

    Millennium Challenge Corporation — With a budget of nearly $20 million, the Formal Technical Education Sub-Activity was designed to strengthen technical and vocational educational institutions in the...

  11. Information Assurance Technical Framework (IATF)

    National Research Council Canada - National Science Library

    2000-01-01

    The Information Assurance Technical Framework (IATF) document was developed to help a broad audience of users both define and understand their technical needs as well as select approaches to meet those needs...

  12. OPTIMAL NETWORK TOPOLOGY DESIGN

    Science.gov (United States)

    Yuen, J. H.

    1994-01-01

    This program was developed as part of a research study on the topology design and performance analysis for the Space Station Information System (SSIS) network. It uses an efficient algorithm to generate candidate network designs (consisting of subsets of the set of all network components) in increasing order of their total costs, and checks each design to see if it forms an acceptable network. This technique gives the true cost-optimal network, and is particularly useful when the network has many constraints and not too many components. It is intended that this new design technique consider all important performance measures explicitly and take into account the constraints due to various technical feasibilities. In the current program, technical constraints are taken care of by the user properly forming the starting set of candidate components (e.g. nonfeasible links are not included). As subsets are generated, they are tested to see if they form an acceptable network by checking that all requirements are satisfied. Thus the first acceptable subset encountered gives the cost-optimal topology satisfying all given constraints. The user must sort the set of "feasible" link elements in increasing order of their costs. The program prompts the user for the following information for each link: 1) cost, 2) connectivity (number of stations connected by the link), and 3) the stations connected by that link. Unless instructed to stop, the program generates all possible acceptable networks in increasing order of their total costs. The program is written only to generate topologies that are simply connected. Tests on reliability, delay, and other performance measures are discussed in the documentation, but have not been incorporated into the program. This program is written in PASCAL for interactive execution and has been implemented on an IBM PC series computer operating under PC DOS. The disk contains source code only. This program was developed in 1985.

  13. Imperial County geothermal development semi-annual report, October 1, 1980-March 31, 1981

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The current geothermal progress in Imperial County is reported. Three areas are reported: Geothermal Administration, Geothermal Planning, and other Geothermal Activities. Geothermal Administration addresses the status of the Imperial Valley Environmental Project (IVEP) transfer, update of the Geothermal Resource Center, and findings of Geothermal field inspections. In addition, the cooperative efforts between industry and the County; Master EIR for the Salton Sea KGRA and the resurveying of the subsidence detection network are covered. Geothermal Planning addresses a Board of Supervisor action on the Union Oil Geothermal Production Permit for 16 wells in the Salton Sea KGRA and a permit for Southern California Edison 10 megawatts power plant in the Salton Sea KGRA. Planning Commission action covers: Amendment of Magma Power's 49 megawatts Geothermal Production Permit to 28 megawatt power plant and relocation of the plant and wells within the Salton Sea KGRA; Exploration permit to Occidental Geothermal for four exploratory wells in East Brawley; Geothermal Production Permit to Southern California Edison to operate a 10 megawatt power plant in the Salton Sea KGRA; and Geothermal production permit to Union Oil for 16 production-injection wells in the Salton Sea KGRA. Lastly, EIR exemptions to CEQA were granted to Chevron for 70 shallow temperature observation holes and Union for fifteen. Other Geothermal Activity addresses the County Direct Heat Development study; the solicitation for district heating and cooling proposals; the new Geothermal Class II-1 disposal site; the DOE Region IX meeting in Tucson; and USGA designating a new KGRA, the East Brawley KGRA, the Westmorland KGRA, and revising the southern border of the Salton Sea KGRA.

  14. Situation Awareness for Socio Technical Systems : A simulation gaming study in intermodal transport operations

    NARCIS (Netherlands)

    Kurapati, S.

    2017-01-01

    Operating socio technical systems such as energy distribution networks, power plants, container terminals, and healthcare systems is a grand challenge. Decision making in these systems is complex due to their size, diversity, dynamism, social component, distributed nature, uncertainty, and

  15. Bioethics for Technical Experts

    Science.gov (United States)

    Asano, Shigetaka

    Along with rapidly expanding applications of life science and technology, technical experts have been implicated more and more often with ethical, social, and legal problems than before. It should be noted that in this background there are scientific and social uncertainty elements which are inevitable during the progress of life science in addition to the historically-established social unreliability to scientists and engineers. In order to solve these problems, therefore, we should establish the social governance with ‘relief’ and ‘reliance’ which enables for both citizens and engineers to share the awareness of the issues, to design social orders and criterions based on hypothetical sense of values for bioethics, to carry out practical use management of each subject carefully, and to improve the sense of values from hypothetical to universal. Concerning these measures, the technical experts can learn many things from the present performance in the medical field.

  16. Independent technical review, handbook

    Energy Technology Data Exchange (ETDEWEB)

    1994-02-01

    Purpose Provide an independent engineering review of the major projects being funded by the Department of Energy, Office of Environmental Restoration and Waste Management. The independent engineering review will address questions of whether the engineering practice is sufficiently developed to a point where a major project can be executed without significant technical problems. The independent review will focus on questions related to: (1) Adequacy of development of the technical base of understanding; (2) Status of development and availability of technology among the various alternatives; (3) Status and availability of the industrial infrastructure to support project design, equipment fabrication, facility construction, and process and program/project operation; (4) Adequacy of the design effort to provide a sound foundation to support execution of project; (5) Ability of the organization to fully integrate the system, and direct, manage, and control the execution of a complex major project.

  17. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Mike, J., P.E.

    2012-08-30

    The STI product is the Final Technical Report from ReliOn, Inc. for contract award DE-EE0000487: Recovery Act PEM Fuel Cell Systems Providing Emergency Reserve and Backup Power. The program covered the turnkey deployment of 431 ReliOn fuel cell systems at 189 individual sites for AT&T and PG&E with ReliOn functioning as the primary equipment supplier and the project manager. The Final Technical Report provides an executive level summary, a comparison of the actual accomplishments vs. the goals and objectives of the project, as well as a summary of the project activity from the contract award date of August 1, 2009 through the contract expiration date of December 31, 2011. Two photos are included in the body of the report which show hydrogen storage and bulk hydrogen refueling technologies developed as a result of this program.

  18. Technical descriptions of ten irrigation technologies for conserving energy

    Energy Technology Data Exchange (ETDEWEB)

    Harrer, B.J.; Wilfert, G.L.

    1983-05-01

    Technical description of ten technologies which were researched to save energy in irrigated agriculture are presented. These technologies are: well design and development ground water supply system optimization, column and pump redesign, variable-speed pumping, pipe network optimization, reduced-pressure center-pivot systems, low-energy precision application, automated gated-pipe system, computerized irrigation scheduling, and instrumented irrigation scheduling. (MHR)

  19. Accessing technical data bases using STDS: A collection of scenarios

    Science.gov (United States)

    Hardgrave, W. T.

    1975-01-01

    A line by line description is given of sessions using the set-theoretic data system (STDS) to interact with technical data bases. The data bases contain data from actual applications at NASA Langley Research Center. The report is meant to be a tutorial document that accompanies set processing in a network environment.

  20. Capturing socio-technical systems with agent-based modelling

    NARCIS (Netherlands)

    Van Dam, K.H.

    2009-01-01

    What is a suitable modelling approach for socio-technical systems? The answer to this question is of great importance to decision makers in large scale interconnected network systems. The behaviour of these systems is determined by many actors, situated in a dynamic, multi-actor, multi-objective and

  1. DENSO Technical Communication Education

    Science.gov (United States)

    Isogai, Emiko; Suzuki, Takamasa

    We developed technical communication education from beginning to managerial levels to enhance communication skills necessary for engineers. The courses in this program progressed from theory to hands-on training and discussion, providing an opportunity for fact-finding and problem-solving. After the courses were completed, the engineers applied what they had learned on the job. The courses proved to be useful, satisfying participating engineers.

  2. Technical approach document

    Energy Technology Data Exchange (ETDEWEB)

    1989-12-01

    The Uranium Mill Tailings Radiation Control Act (UMTRCA) of 1978, Public Law 95-604 (PL95-604), grants the Secretary of Energy the authority and responsibility to perform such actions as are necessary to minimize radiation health hazards and other environmental hazards caused by inactive uranium mill sites. This Technical Approach Document (TAD) describes the general technical approaches and design criteria adopted by the US Department of Energy (DOE) in order to implement remedial action plans (RAPS) and final designs that comply with EPA standards. It does not address the technical approaches necessary for aquifer restoration at processing sites; a guidance document, currently in preparation, will describe aquifer restoration concerns and technical protocols. This document is a second revision to the original document issued in May 1986; the revision has been made in response to changes to the groundwater standards of 40 CFR 192, Subparts A--C, proposed by EPA as draft standards. New sections were added to define the design approaches and designs necessary to comply with the groundwater standards. These new sections are in addition to changes made throughout the document to reflect current procedures, especially in cover design, water resources protection, and alternate site selection; only minor revisions were made to some of the sections. Sections 3.0 is a new section defining the approach taken in the design of disposal cells; Section 4.0 has been revised to include design of vegetated covers; Section 8.0 discusses design approaches necessary for compliance with the groundwater standards; and Section 9.0 is a new section dealing with nonradiological hazardous constituents. 203 refs., 18 figs., 26 tabs.

  3. Technical Leadership Development Program

    Science.gov (United States)

    2010-12-13

    the traditional tenets of leadership and management , systems thinking, understanding SOS issues, and thinking and acting holistically. Our research...international element 2.0 Enterprise Leadership and Management UNCLASSIFIED Contract Number: H98230-08-D-0171 DO 002. TO002, RT 004 Report No...mechanisms for leadership of the overall technical effort, for systems engineering, for requirements, management , and for systems integration. o Develop

  4. Coordination of the commissioning of the LHC technical systems

    CERN Document Server

    Saban, R; Casas Lino, M P; Fernandez Robles, C; Pojer, M; Schmidt, R; Solfaroli Camillocci, M; Vergara Fernandez, A

    2008-01-01

    The Large Hadron Collider operation relies on 1232 superconducting dipoles with a field of 8.33T and 400 superconducting quadrupoles with a strength of 220 T/m powered at 12kA, operating in superfluid He at 1.9K. For dipoles and quadrupoles as well as for many other magnets more than 1700 power converters are necessary to feed the superconducting circuits. A sophisticated magnet protection system is crucial to detect a quench and safely extract the energy stored in the circuits (about 1GJ only in one of the dipole circuits) after a resistive transition. Besides, in such complex architecture, many technical services (e.g. cooling and ventilation, technical network, electrical distribution, GSM network, controls system, etc.) have to be reliably available during commissioning. Consequently, the commissioning of the technical systems and the associated infrastructures has been carefully studied. Procedures, automatic control and analysis tools, repositories for test data, management structures for carrying out a...

  5. Technical training - Places available

    CERN Multimedia

    2012-01-01

    If you would like more information on a course, or for any other inquiry/suggestions, please contact Technical.Training@cern.ch Valeria Perez Reale, Learning Specialist, Technical Programme Coordinator (Tel.: 62424) Eva Stern and Elise Romero, Technical Training Administration (Tel.: 74924) HR Department Electronic Design Next Session Duration Language Availability Comprehensive VHDL for FPGA Design 08-Oct-12 to 12-Oct-12 5 days English 4 places Electrostatique / Protection ESD 28-Sep-12 to 28-Sep-12 3 hours French 25 places Impacts de la suppression du plomb (RoHS) en électronique 26-Oct-12 to 26-Oct-12 8 hours French 14 places Introduction to VHDL 10-Oct-12 to 11-Oct-12 2 days English 9 places LabVIEW Real Time and FPGA 13-Nov-12 to 16-Nov-12 5 days French 5 places LabVIEW for Experts 24-Sep-12 to 28-Sep-12 5 days English 6 places LabVIEW for beginners 15-Oct-12 to 17-...

  6. Technical risks of offshore structures

    NARCIS (Netherlands)

    Klijnstra, J.; Zhang, X.; Putten, van der Sjoerd; Rockmann, C.

    2017-01-01

    Offshore areas are rough and high energy areas. Therefore, offshore constructions are prone to high technical risks. This chapter elaborates on the technical risks of corrosion and biofouling and technical risks through mechanical force. The expected lifetime of an offshore structure is to a great

  7. Assessing Students' Technical Skill Attainment

    Science.gov (United States)

    Jorgensen, Haley

    2010-01-01

    The Wisconsin Technical College System (WTCS) is working to comply with the Carl D. Perkins Career and Technical Education Improvement Act of 2006 (Perkins) to ensure that its graduates have mastered the technical skills needed by business and industry. The legislation requires that each state identify and approve program assessment strategies…

  8. Semi-annual monitoring report for Barnes, Kansas, for July-December 2009.

    Energy Technology Data Exchange (ETDEWEB)

    LaFreniere, L. M.; Environmental Science Division

    2010-04-27

    The Commodity Credit Corporation of the U.S. Department of Agriculture (CCC/USDA) operated a grain storage facility at Barnes, Kansas, during most of the interval 1949-1974. Carbon tetrachloride contamination was initially detected in 1986 in the town's public water supply wells. In 2006-2007, the CCC/USDA conducted a comprehensive targeted investigation at and near its former property in Barnes to characterize this contamination. Those results were reported previously (Argonne 2008a). In November 2007, the CCC/USDA began quarterly groundwater monitoring at Barnes. The monitoring is being conducted on behalf of the CCC/USDA by Argonne National Laboratory, in accord with the recommendations made in the report for the 2006-2007 targeted investigation (Argonne 2008a). The objective is to monitor the carbon tetrachloride contamination identified in the groundwater at Barnes. The sampling is presently conducted in a network of 28 individual monitoring wells (at 19 distinct locations), 2 public water supply wells, and 1 private well (Figure 1.1). The results of the 2006-2007 targeted investigation and the subsequent monitoring events (Argonne 2008a-d, 2009a,b) demonstrated the presence of carbon tetrachloride contamination in groundwater at levels exceeding the Kansas Department of Health and Environment (KDHE) Tier 2 risk-based screening level (RBSL) of 5.0 {micro}g/L for this compound. The contaminant plume appears to extend from the former CCC/USDA property northwestward, toward the Barnes public water supply wells. Information obtained during the 2006-2007 investigation indicates that at least one other potential source might have contributed to the groundwater contaminant plume (Argonne 2008a). The former agriculture building owned by the local school district, located immediately east of well PWS3, is also a potential source of the contamination. This current report presents the results of the seventh quarterly monitoring event, conducted in September

  9. Joint ACE ground penetrating radar antenna test facility at the Technical University of Denmark

    DEFF Research Database (Denmark)

    Lenler-Eriksen, Hans-Rudolph; Meincke, Peter; Sarri, A.

    2005-01-01

    A ground penetrating radar (GPR) antenna test facility, established within the ACE network at the Technical University of Denmark (DTU), is described. Examples of results from the facility obtained from measurements of eight different GPR antennas are presented.......A ground penetrating radar (GPR) antenna test facility, established within the ACE network at the Technical University of Denmark (DTU), is described. Examples of results from the facility obtained from measurements of eight different GPR antennas are presented....

  10. 75 FR 27341 - Increasing Market and Planning Efficiency Through Improved Software; Notice of Technical...

    Science.gov (United States)

    2010-05-14

    ... for the purposes of stimulating discussion and sharing of information about the technical aspects of... respect to energy, reserves, ramp rates, and network topology), flexible dispatch, settlement calculations... modeling aspects of these issues. We expect that participants with technical understanding of operations...

  11. National Profiles in Technical and Vocational Education in Asia and the Pacific: Bhutan.

    Science.gov (United States)

    United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

    This technical and vocational education (TVE) profile on Bhutan is one in a series of profiles of UNESCO member countries. It is intended to be a handy reference on TVE systems, staff development, technical cooperation, and information networking. Part I, Policy Concern, provides general information on the education delivery system, the role of…

  12. Exploring the impact of socio-technical core-periphery structures in open source software development

    NARCIS (Netherlands)

    Amrit, Chintan Amrit; van Hillegersberg, Jos

    2010-01-01

    In this paper we apply the social network concept of core-periphery structure to the socio-technical structure of a software development team. We propose a socio-technical pattern that can be used to locate emerging coordination problems in Open Source projects. With the help of our tool and method

  13. National Profiles in Technical and Vocational Education in Asia and the Pacific: Fiji.

    Science.gov (United States)

    United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

    This technical and vocational education (TVE) profile on Fiji is one in a series of profiles of UNESCO member countries. It is intended to be a handy reference on TVE systems, staff development, technical cooperation, and information networking. Part I, General Information, covers the following: location, area, and physical features; economic and…

  14. Towards technical interoperability in telemedicine.

    Energy Technology Data Exchange (ETDEWEB)

    Craft, Richard Layne, II

    2004-05-01

    For telemedicine to realize the vision of anywhere, anytime access to care, the question of how to create a fully interoperable technical infrastructure must be addressed. After briefly discussing how 'technical interoperability' compares with other types of interoperability being addressed in the telemedicine community today, this paper describes reasons for pursuing technical interoperability, presents a proposed framework for realizing technical interoperability, identifies key issues that will need to be addressed if technical interoperability is to be achieved, and suggests a course of action that the telemedicine community might follow to accomplish this goal.

  15. Friendly network robotics; Friendly network robotics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    A working group (WG) study was conducted aiming at realizing human type robots. The following six working groups in the basement field were organized to study in terms mostly of items of technical development and final technical targets: platform, and remote attendance control in the basement field, maintenance of plant, etc., home service, disaster/construction, and entertainment in the application field. In the platform WG, a robot of human like form is planning which walks with two legs and works with two arms, and the following were discussed: a length of 160cm, weight of 110kg, built-in LAN, actuator specifications, modulated structure, intelligent driver, etc. In the remote attendance control WG, remote control using working function, stabilized movement, stabilized control, and network is made possible. Studied were made on the decision on a remote control cockpit by open architecture added with function and reformable, problems on the development of the standard language, etc. 77 ref., 82 figs., 21 tabs.

  16. Data analysis of Permanent GPS networks in Italy and surrounding region: application of a distributed processing approach

    Directory of Open Access Journals (Sweden)

    M. Anzidei

    2006-06-01

    Full Text Available We describe the procedures used to combine into a uniform velocity solution the observations of more than 80 continuous GPS stations operating in the central Mediterranean in the 1998-2004 time interval. We used a distributed processing approach, which makes efficient use of computer resources, while producing velocity estimates for all stations in one common reference frame, allowing for an effective merging of all the observations into a self-consistent network solution. We describe the CGPS data archiving and processing procedures, and provide main results in terms of position time-series and velocities for all stations that observed more than three years. We computed horizontal and vertical velocities accounting for the seasonal (annual and semi-annual signals, and considering the off-sets in the coordinate time-series caused by station equipment changes. Weighted post-fit RMS of the north, east and vertical velocity components are in the range of 1.57-2.08 mm, 1.31-3.28 mm, and 3.60-7.24 mm, respectively, which are reduced by solving for seasonal signals in the velocity estimates. The annual and semi-annual signals in the height components, with amplitudes up to 4.8 mm, are much stronger than those in the horizontal components. The mean amplitudes of annual and semi-annual signals are within 0.18-0.47 mm, 0.23-0.52 mm and 0.55-1.92 mm in the north, east and vertical components, respectively.

  17. COMPLEMENTARY EFFECTS IN ACTIVIZATION OF SCIENTIFIC AND TECHNICAL ACTIVITIES IN THE INFORMATION SOCIETY

    Directory of Open Access Journals (Sweden)

    O. Zhylinska

    2016-09-01

    Full Text Available This paper proposes new methodological approaches in the study of development problems of scientific and technical activities in the information society. The essence and economic nature of development scientific and technical activities' from the standpoint of methodological collectivism are disclosed, a new phenomenon intensification of development scientific and technical activities by forming the global networks of scientific and technical knowledge users that provides sharing of the burden of transformation and transaction costs as generation as well as economic implementation of research and technical knowledge across the globe are showed. This study outlines the complementary effects in intensify development of scientific and technological activities components: research and development (RD, training of scientific personnel, provision of scientific and technical services, which generates of world market's complementary goods, being world market of educational services of scientific and technical information, industrial properties, high technology products, venture capital investments and stock market.

  18. INOPS Technical Report

    DEFF Research Database (Denmark)

    Lindholst, Andrej Christian

    This research report contains background analyses and findings from the INOPS research project. The purpose of the INOPS project was, from an international perspective, to describe, analyse and recommend different forms of contracting out and public–private co-operations within the technical area...... in Denmark, Sweden, Norway and England. The research report addresses three key research questions in a comparative perspective: 1. Why are park and road maintenance services contracted out? 2. How are park and road maintenance services contracted out? 3. What are the outcomes from contracting out park...

  19. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Sobecky, Patricia A; Taillefert, Martial

    2013-03-29

    This final technical report describes results and findings from a research project to examine the role of microbial phosphohydrolase enzymes in naturally occurring subsurface microorganisms for the purpose of promoting the immobilization of the radionuclide uranium through the production of insoluble uranium phosphate minerals. The research project investigated the microbial mechanisms and the physical and chemical processes promoting uranium biomineralization and sequestration in oxygenated subsurface soils. Uranium biomineralization under aerobic conditions can provide a secondary biobarrier strategy to immobilize radionuclides should the metal precipitates formed by microbial dissimilatory mechanisms remobilize due to a change in redox state.

  20. RADTRAN 6 Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Neuhauser, Karen Sieglinde [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Heames, Terence John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); O' Donnell, Brandon M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dennis, Matthew L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  1. RADTRAN 6 technical manual.

    Energy Technology Data Exchange (ETDEWEB)

    Weiner, Ruth F.; Neuhauser, Karen Sieglinde; Heames, Terence John; O' Donnell, Brandon M.; Dennis, Matthew L.

    2014-01-01

    This Technical Manual contains descriptions of the calculation models and mathematical and numerical methods used in the RADTRAN 6 computer code for transportation risk and consequence assessment. The RADTRAN 6 code combines user-supplied input data with values from an internal library of physical and radiological data to calculate the expected radiological consequences and risks associated with the transportation of radioactive material. Radiological consequences and risks are estimated with numerical models of exposure pathways, receptor populations, package behavior in accidents, and accident severity and probability.

  2. Neural Networks in Control Applications

    DEFF Research Database (Denmark)

    Sørensen, O.

    The intention of this report is to make a systematic examination of the possibilities of applying neural networks in those technical areas, which are familiar to a control engineer. In other words, the potential of neural networks in control applications is given higher priority than a detailed...... study of the networks themselves. With this end in view the following restrictions have been made: - Amongst numerous neural network structures, only the Multi Layer Perceptron (a feed-forward network) is applied. - Amongst numerous training algorithms, only four algorithms are examined, all...... in a recursive form (sample updating). The simplest is the Back Probagation Error Algorithm, and the most complex is the recursive Prediction Error Method using a Gauss-Newton search direction. - Over-fitting is often considered to be a serious problem when training neural networks. This problem is specifically...

  3. Neural Networks in Control Applications

    DEFF Research Database (Denmark)

    Sørensen, O.

    simulated process and compared. The closing chapter describes some practical experiments, where the different control concepts and training methods are tested on the same practical process operating in very noisy environments. All tests confirm that neural networks also have the potential to be trained......The intention of this report is to make a systematic examination of the possibilities of applying neural networks in those technical areas, which are familiar to a control engineer. In other words, the potential of neural networks in control applications is given higher priority than a detailed...... study of the networks themselves. With this end in view the following restrictions have been made: - Amongst numerous neural network structures, only the Multi Layer Perceptron (a feed-forward network) is applied. - Amongst numerous training algorithms, only four algorithms are examined, all...

  4. A Technical Note

    African Journals Online (AJOL)

    thirdly, it is available for only six months each year. The objectives of the processing and marketing were to address these problems. Tanzania J.Agric.~c. (2006) Vol.7 No.2 .... The bamboo wine (p2). In: IDRC BamboolRattan Networks News. No 14. February 1993, IDRC- South Asia. Regional Office, New Delhi. Kants, Sand ...

  5. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Church, Bruce W

    2008-10-15

    Most prokaryotes of interest to DOE are poorly understood. Even when full genomic sequences are available, the function of only a small number of gene products are clear. The critical question is how to best infer the most probable network architectures in cells that are poorly characterized. The project goal is to create a computational hypothesis testing (CHT) framework that combines large-scale dynamical simulation, a database of bioinformatics-derived probable interactions, and numerical parallel architecture data-fitting routines to explore many “what if ?” hypotheses about the functions of genes and proteins within pathways and their downstream effects on molecular concentration profiles and corresponding phenotypes. From this framework we expect to infer signal transduction pathways and gene expression networks in prokaryotes. Detailed mechanistic models of E. Coli have been developed that directly incorporate DNA sequence information. The CHT framework is implemented in the NIEngine network inference software. NIEngine has been applied to recover gene regulatory networks in E. coli to assess performance. Application to Shewanel la oneidensi and other organism of interest DOE will be conducted in partnership with Jim Collin's Lab at Boston University and other academic partners. The CHT framework has also found broad application in the automated learning of biology for purposes of improving human health.

  6. Thematic outlook: the technical survey for the fuel cell research network PACO. June 14, 2004 update no. 25; Veille thematique. La veille technique pour le reseau PACO. Actualisation du 14 juin 2004, no. 25

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    Summaries of several recent articles are gathered here. They deal with fuel cells, means of transport, hydrogen production and storage. Their different titles are given below: 1)the American plan of de-regulated electric power production with fuel cells 2)application of single wall carbon nano-tubes in fuel cells 3)scenarios of SOFC introduction on the Japanese market 4)advanced SOFC technology and developments at the Siemens Westinghouse firm 5)manufacture and optimal size of a PEMFC cogeneration system for multi-residential application: application to the decomposition strategy 6)analysis of the life cycle of fuel cells using disposal gas 7)technical and economical analysis of a three-generation SOFC system 8)use of APU-FC for an average class tactical lorry, during a use in partial electric power supply or in condition of a silent stand by 9)modelling of the current supply of a lorry at stop: comparison between a idling engine and a APU 10)production of hydrogen and carbon nano-tubes by methane decomposition in a two-stage fluidized bed reactor 11)hydrogen production by auto-thermal reforming of gas-oil 12)simulations of cold starting of a gasoline reformer for mobile applications of fuel cells 13)ethanol production by steam reforming on a Pd/{gamma}Al{sub 2}O{sub 3} trading catalyst 14)control of the CO{sub 2}/(CO+CO{sub 2}) ratio and of the deactivation of the catalyst for the gasoline steam reforming 15)comparison of three integrated processes of partial oxidation producing hydrogen for fuel cells applications 16)search of new methods of the mixture: natural gas/hydrogen production for use in natural gas systems in The Netherlands 17)outline of the energy/hydrogen storage: progress achieved with the different techniques and future prospect of nano-materials 18) hydrogen storage in carbon nano-tubes synthesized by solar way 19)forecast and measurement of the limits of the flammability domain of fuel cells. The references of these articles rae detailed. (O.M.)

  7. Thematic outlook: the technical survey for the fuel cell research network PACO. February 26, 2004 update no. 21; Veille thematique. La veille technique pour le reseau PACO. Actualisation du 26 fevrier 2004, no. 21

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    Summaries of several recent articles are gathered here. They deal with fuel cells, means of transport, hydrogen production and storage, environment. Their different titles are given below: 1)a 10 kW pressurized SOFC unit 2)design of a SOFC system for unstable network 3)demonstration for the general public of high and low temperature fuel cells 4)development of an APU for mobile application based on the SOFC technology 5)fuel cells as continuous supply source 6)PEM fuel cells with carbon nano-tubes electrodes 7)a temperature control system of a reformer fed by a fuel cell 8)the hybridization, a solution for fuel cell vehicles 9)hydrogen production by ethanol auto-thermal reforming on a Rh/Al{sub 2}O{sub 3} catalyst 10)partial oxidation reforming catalyst for fuel cells vehicles 11)hydrogen production increased by a reactive mixture of alkaline aqueous solutions of an alkaline metal borohydride for fuel cells 12)development of an hydrogen generator (of about 10 kW) using chemical hydrides 13)device for pure gases production, in particular hydrogen and oxygen, from gaseous or liquid mixtures, for stationary and mobile applications 14)hydrogen storage in carbon nano-tubes synthesized by pyrolysis with a nickel-lanthanum catalyst 15)estimation of the new energetic and transport systems; the case of fuel cells, part 2: environmental performances. The references of these articles are detailed. (O.M.)

  8. Thematic outlook: the technical survey for the fuel cell research network (PACO). January 28, 2004 update no. 20; Veille thematique. La veille technique pour le reseau PACO. Actualisation du 15 janvier 2004, no. 20

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    Summaries of several recent articles are gathered here. They deal with fuel cells, means of transport, hydrogen production and storage. Their different titles are given below: 1)the characteristics of PEMFC running at negative exterior temperatures 2)the effects of CO poisoning on PEMFC at temperatures until 200 C 3)the mechanical properties of tubular SOFC 4)fuel cells fed with coal 5)analysis of cogeneration system: planar SOFC/gas turbine 6)modelling of fuel cells for transport, according to the neuronal networks method 7)design of hybrid fuel cell systems 8)a comparative study of direct methanol fuel cells for vehicles 9)desulfurization by adsorption and catalytic steam reforming of gas oil for applications in fuel cells 10)feasibility study of hydrogen production for fuel cell vehicles by naphtha on-board steam reforming 11)reforming catalyst of kerosene for fuel cell, kinetics and modelling of steam reforming 12)reforming by partial oxidation of low lubricant power gas oil, of dimethyl ether and methane for SOFC 13)conversion of solar heat in fuels by solar thermochemistry 14)hydrogen purification for fuel cells: selective oxidation of CO on Pt-Fe / zeolite catalysts 15)hydrogen photo-production from cellulose derived compound, with a system: chlorophyll / platinum nano-particles 16)hydrogen storage in commercial activated carbon. The references of these articles are detailed. (O.M.)

  9. Collation of monthly and semi-annual reports on instrumentation at the ''Decade 80'' House in Tucson, Arizona

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Russell K.; Lyman, W. Stuart

    1978-06-01

    The ''Decade 80'' solar house, located in Tucson, Arizona, was built by the Copper Development Association, Inc., to show the use of copper in home building and to demonstrate the use of solar energy to provide space heating and cooling and domestic hot water. The auxiliary energy sources are electrical resistance heating for the domestic hot water and a gas-fired boiler for space heating and operation of the absorption air conditioning units. This program to instrument the ''Decade 80'' solar house and to acquire performance data on the system began in November 1976. The Semi-Annual report gives an overview of the instrumentation effort through February 17, 1978, with the back-up monthly reports reflecting more detail of the effort that went into the implementation of the data acquisition system through April 1978.

  10. Declarative Networking

    CERN Document Server

    Loo, Boon Thau

    2012-01-01

    Declarative Networking is a programming methodology that enables developers to concisely specify network protocols and services, which are directly compiled to a dataflow framework that executes the specifications. Declarative networking proposes the use of a declarative query language for specifying and implementing network protocols, and employs a dataflow framework at runtime for communication and maintenance of network state. The primary goal of declarative networking is to greatly simplify the process of specifying, implementing, deploying and evolving a network design. In addition, decla

  11. DAWN: Dynamic Ad-hoc Wireless Network

    Science.gov (United States)

    2016-06-19

    Wireless Network 1 Introduction The network-centric battlefield includes sensors, troop carriers, unmanned air vehicle (UAV), aircraft, smart ...Bellman Control Heritage Award. • Honorary Doctorate at Technical University of Crete. • Best paper award at 2008 IEEE International Conference on Mobile Ad-hoc and Sensor Systems.

  12. 77 FR 38833 - Job Accommodation Network

    Science.gov (United States)

    2012-06-29

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF LABOR Job Accommodation Network AGENCY: Office of Disability Employment Policy, Department of Labor. Announcement Type... operate its Job Accommodation Network (JAN), a national technical assistance center that facilitates the...

  13. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: AutoCAD 2002 - niveau 1 : 19, 20.4 et 3, 4.5.2004 (4 jours) Oracle 8i/9i - Develop Web-based Applications with PL/SQL : 19 & 20.4.2004 (2 days) Introduction to ANSYS : 20 - 23.4.2004 (4 days) LabVIEW Hands-on : 20.4.2004 (half-day, p.m.) FrontPage XP - niveau 2 : 26 & 27.4.2004 (2 jours) The Joint PVSS JCOP Framework : 26 -...

  14. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Computational Electromagnetics with the ELEKTRA Module of OPERA-3D : 27 & 28.4.2004 (2 days) Hands-on Introduction to Python Programming : 3 - 5.5.2004 (3 days) LabVIEW Base 2 : 6 & 7.5.2004 (2 jours) Project Planning with MS-Project : 6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 10 - 12.5.2004 (3...

  15. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study for Microsoft applications :12.2.2004 (morning) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) CLEAN-2002 ...

  16. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Instructor-led WBTechT study or follow-up for Microsoft applications : 19.2.2004 (morning) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Pa...

  17. Technical Training: Places available

    CERN Document Server

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: LabVIEW base 1 : 25 - 27.2.2004(3 jours) Instructor-led WBTechT study or follow-up for Microsoft applications : 26.2.2004 (morning) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) LabVIEW hands-on (E) : 16.3.2004 (afternoon) LabVIEW Basics 1 : 22 - 24.3.2004 ...

  18. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: C++ for Particle Physicists : 8 - 12.3.2004 (6 X 4-hour sessions) Introduction to the CERN EDMS : 9.3.2004 (1 day, free of charge) The EDMS MTF in Practice : 10.3.2004 (morning, free of charge) CLEAN-2002: Working in a Cleanroom : 10.3.2004 (afternoon, free of charge) The CERN EDMS for Engineers : 11.3.2004 (1 day, free of charge) LabVIEW hands-on (E):...

  19. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Wednesday 6 March TECHNICAL TRAINING SEMINAR from 9:30 to 16:45 - IT Amphitheatre - bldg. 31.3.004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars...

  20. Technical Training: Places available

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Project Planning with MS-Project :6 & 13.5.2004 (2 days) Word 2003 - niveau 1 : 10 & 11.5.2004 (2 jours) Oracle 9i : SQL : 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1: 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1 : 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL : 2 - 4.6.2...

  1. Technical Training: Places Available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Oracle 9i: SQL: 17 - 19.5.2004 (3 days) Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9i : New f...

  2. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an 'application for training' form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. Technical Training Monique Duval - Tel.74924 technical.training@cern.ch The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Word 2003 - niveau 2 : 24 & 25.5.2004 (2 jours) VisualEliteHDL : 25 & 26.5.2004 (2 days) EXCEL 2003 - niveau 1 : 27 & 28.5.2004 (2 jours) STEP7 Programming Level 1: 1 - 4.6.2004 (4 days) Oracle 9i : Programming with PL/SQL: 2 - 4.6.2004 (3 days) CST Microwave Studio: 3 & 4.6.2004 (2 days) Oracle 9...

  3. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Joint PVSS JCOP Framework: 8 - 12.8.2005 (5 days) FrontPage 2003 - niveau 1 : 1 - 2.9.2005 (2 jours) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.9.2005 (1 jour) LabVIEW Basics 1 : 5 - 7.9.2005 (3 days, dates to be confirmed) Introduction à Windows XP au CERN : 12.9.2005 (1 demi-journée) FrontPage 2003 - niveau 2 : 15 - 16.9.2005 (2 jours) AutoCAD 2005 - niveau 1 : 22, 23, 28, 29.9.2005 (4 jours) MAGNE-05 - Magnétisme pour l'électrotechnique : 27 - 29.9.2005 (3 jours) LabVIEW Application Development (Intermediate I): 5 - 7.12.2005 (3 days) LabVIEW Advanced Programming (Intermediate 2): 8 - 9.12.2005 (2 days) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 technical.training@cern.ch

  4. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 28.6 - 1.7.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo... Work with long documents : 6.7.2005 (afternoon) ACCES...

  5. Technical Training: Places available

    CERN Multimedia

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Hands-on Introduction to Python Programming: 28 - 30.6.2005 (3 days) Introduction to ANSYS: 21 - 24.6.2005 (4 days) IT3T/3 - Working remotely with Windows XP: 28.6.2005 (IT Technical Training Tutorial, free of charge) IT3T/4 - Editing Websites with Frontpage 2003: 30.6.2005 (IT Technical Training Tutorial, free of charge) Utilisation des fichiers PDF avec ACROBAT 7.0 : 5.7.2005 (1 jour) FrontPage 2003 - niveau 1 : 6-7.7.2005 (2 jours) LabVIEW base 1 : 4 - 6.7.2005 (3 jours) LabVIEW Basics 2: 7 - 8.7.2005 (2 days) WORD 2003 (Short Course I) - HowTo... Work with repetitive tasks /AutoText, AutoFormat, AutoCorrect, Find/Replace) : 4.7.2005 (afternoon) WORD 2003 (Short Course II) - HowTo... Mail merge: 5.7.2005 (afternoon) WORD 2003 (Short Course III) - HowTo (4 mornings) EXCEL 2003 (Short Course I) - HowTo... Work ...

  6. TECHNICAL TRAINING: Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: Hands-on Introduction to Python Programming : 12 - 14.11.03(3 days) ACCESS 2000 - niveau 1 : 13 & 14.11.03 (2 jours) C++ for Particle Physicists : 17 - 21.11.03 (6 X 3-hour lectures) Programmation automate Schneider TSX Premium - niveau 2 : 18 - 21.11.03 (4 jours) Project Planning with MS-Project  (free of charg...

  7. TECHNICAL TRAINING: Places available**

    CERN Multimedia

    2003-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval Tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The EDMS-MTF in practice (free of charge) : 28 -  30.10.03 (6 half-day sessions) AutoCAD 2002 – Level 1 : 3, 4, 12, 13.11.03 (4 days) LabVIEW TestStand ver. 3 : 4 & 5.11.03 (2 days) Introduction to PSpice : 4.11.03 p.m. (half-day) Hands-on Introduction to Python Programming : 12 – 14.11.03 (3 days) ACCESS ...

  8. Technical Training: Places available**

    CERN Multimedia

    2004-01-01

    If you wish to participate in one of the following courses, please discuss with your supervisor and apply electronically directly from the course description pages that can be found on the Web at: http://www.cern.ch/Training/ or fill in an "application for training" form available from your Divisional Secretariat or from your DTO (Divisional Training Officer). Applications will be accepted in the order of their receipt. TECHNICAL TRAINING Monique Duval tel. 74924 technical.training@cern.ch ** The number of places available may vary. Please check our Web site to find out the current availability. Places are available in the following courses: The JAVA Programming Language Level 1 : 9 & 10.1.2004 (2 days) LabVIEW TestStand I (E) : 23 & 24.2.2004 (2 days) LabVIEW base 1 : 25 - 27.2.2004 (3 jours) CLEAN-2002 : Working in a Cleanroom : 10.3.2004 (afternoon - free of charge) C++ for Particle Physicists : 8 - 12.3.2004 ( 6 X 4-hour sessions) LabVIEW hands-on (E) 16.3...

  9. Technical training: places available

    CERN Multimedia

    HR Department

    2007-01-01

    CERN Technical Training: Open Courses (April - June 2007) The following course sessions are currently scheduled in the framework of the CERN Technical Training Programme 2007:   AutoCAD 2006 - niveau 1 (course in French): 25.4.- 26.4.2007 & 2.5. - 3.5.2007 (4 days in 2 modules, 5 places available) AutoCAD 2006 - niveau 1 (course in French): 27.6.- 28.6.2007 & 3.7. - 4.7.2007 (4 days in 2 modules, 5 places available) AutoCAD Mechanical 2006 (course in French) 21.6.-22.6.2007 (2 days, 8 places available) * NEW COURSE* Automate de securite S7 (course in French) 14.5.-16.5.2007 (3 days, 4 places available) * NEW COURSE* Automate de securite S7 (course in French): 9.5.-11.5.2007 (3 days, 4 places available) JCOP - Joint PVSS-JCOP Frameswork (course in English): 21.5.-25.5.2007 (5 days, 12 places available) JCOP - Finite State Machines in the JCOP Frameswork (course in English): 12.6.-14.6.2007 (3 days, 12 places available) LabVIEW Basics 1 (in English): 2.-4.5.2007 (3 days, 7 places ...

  10. E-Division semiannual report. Progress report, June 1--December 31, 1977. [Electronics and Instrumentation Division, LASL

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, P.A. (comp.)

    1978-03-01

    The status of the programs and projects of the Electronics Division is reported for the period of June through December 1977. The presentation is divided into three sections: Research, Engineering Support, and Technical Services. Each of these sections presents the activities and accomplishments of the corresponding branch within the Division. The primary goal of the Research and Development branch is to advance technology for future applications. The primary goal of the Engineering Support branch is to apply advanced technology to laboratory and material problems. The primary goal of the Technical Services branch is to provide a technical base and support for Laboratory programs. These goals are reflected in this report. Among the subject areas included are the following: radiation detectors, temperature monitoring, electromagnetic probing, Josephson junction switching devices, fiber optics, high-temperature electronics, HVAC systems, microprocessors, fuel cell-powered vehicles, laser fusion.

  11. International Symposium on Ubiquitous Networking

    CERN Document Server

    Medromi, Hicham; Sadik, Mohamed

    2016-01-01

    This volume publishes new trends and findings in hot topics related to ubiquitous computing/networking. It is the outcome of UNet - ainternational scientific event that took place on September 08-10, 2015, in the fascinating city of Casablanca, Morocco. UNet’15 is technically sponsored by IEEE Morocco Section and IEEE COMSOC Morocco Chapter.

  12. Technical Support Essentials Advice to Succeed in Technical Support

    CERN Document Server

    Sanchez, Andrew

    2010-01-01

    Technical Support Essentials is a book about the many facets of technical support. It attempts to provide a wide array of topics to serve as points of improvement, discussion, or simply topics that you might want to learn. The topics range from good work habits to the way technical supportgroups establish their own style of work. This book applies theories, models, and concepts synthesized from existing research in other fields-such as management, economics, leadership, and psychology-and connects them to technical support. The goal is to build on the work of others and allow their success to

  13. Network systems security analysis

    Science.gov (United States)

    Yilmaz, Ä.°smail

    2015-05-01

    Network Systems Security Analysis has utmost importance in today's world. Many companies, like banks which give priority to data management, test their own data security systems with "Penetration Tests" by time to time. In this context, companies must also test their own network/server systems and take precautions, as the data security draws attention. Based on this idea, the study cyber-attacks are researched throughoutly and Penetration Test technics are examined. With these information on, classification is made for the cyber-attacks and later network systems' security is tested systematically. After the testing period, all data is reported and filed for future reference. Consequently, it is found out that human beings are the weakest circle of the chain and simple mistakes may unintentionally cause huge problems. Thus, it is clear that some precautions must be taken to avoid such threats like updating the security software.

  14. A distribution network review

    Energy Technology Data Exchange (ETDEWEB)

    Fairbairn, R.J.; Maunder, D.; Kenyon, P.

    1999-07-01

    This report summarises the findings of a study reviewing the distribution network in England, Scotland and Wales to evaluate its ability to accommodate more embedded generation from both fossil fuel and renewable energy sources. The background to the study is traced, and descriptions of the existing electricity supply system, the licence conditions relating to embedded generation, and the effects of the Review of Electricity Trading Arrangements are given. The ability of the UK distribution networks to accept embedded generation is examined, and technical benefits/drawbacks arising from embedded generation, and the potential for uptake of embedded generation technologies are considered. The distribution network capacity and the potential uptake of embedded generation are compared, and possible solutions to overcome obstacles are suggested. (UK)

  15. Access network evolution: optical fibre to the subscribers and impact on the metropolitan and home networks

    Science.gov (United States)

    Chanclou, P.; Belfqih, Z.; Charbonnier, B.; Duong, T.; Frank, F.; Genay, N.; Huchard, M.; Guignard, P.; Guillo, L.; Landousies, B.; Pizzinat, A.; Ramanitra, H.; Saliou, F.; Durel, S.; Urvoas, P.; Ouzzif, M.; Le Masson, J.

    2008-11-01

    This article describes broadband optical access network evolution including high speed interfaces for fixed and mobile services. The impact of network access evolution on network architecture and transmission equipment localization on the metropolitan network is also mentioned. Some technical challenges are also discussed, namely concerning the optical extended budget, as well as the impact of access evolution on the metropolitan network. The access bit rate evolution has also an impact on the home network by the necessity of offering connectivity to customers at 1 Gbit/s, for example, over plastic optical fibre. To cite this article: P. Chanclou et al., C. R. Physique 9 (2008).

  16. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Rasure, John, et. al.

    2008-03-07

    Through past DOE funding, the MIND Research network has funded a national consortium effort that used multi-modal neuroimaging, genetics, and clinical assessment of subjects to study schizophrenia in both first episode and persistently ill patients. Although active recruitment of research participants is complete, this consortium remains active and productive in terms of analysis of this unique multi-modal data collected on over 320 subjects.

  17. Mechanical engineering department technical review

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.B. Denney, R.M. (eds.)

    1981-01-01

    The Mechanical Engineering Department Technical Review is published to: (1) inform the readers of various technical activities within the department, (2) promote exchange of ideas, and (3) give credit to the personnel who are achieving the results. The report is formatted into two parts: technical acievements and publication abstracts. The first is divided into eight sections, one for each division in the department providing the reader with the names of the personnel and the division accomplishing the work.

  18. Mechanical Engineering Department Technical Review

    Energy Technology Data Exchange (ETDEWEB)

    Carr, R.B.; Denney, R.M. (eds.)

    1981-07-01

    The Mechanical Engineering Department Technical Review is published to inform readers of various technical activities within the Department, promote exchange of ideas, and give credit to personnel who are achieving the results. The report is presented in two parts: technical achievements and publication abstracts. The first is divided into seven sections, each of which reports on an engineering division and its specific activities related to nuclear tests, nuclear explosives, weapons, energy systems, engineering sciences, magnetic fusion, and materials fabrication.

  19. SYSTEM ANALYSIS IN LANGUAGE TEAHING AND LEARNING IN TECHNICAL UNIVERSITY

    Directory of Open Access Journals (Sweden)

    Tatiana V. Sidorenko

    2015-01-01

    Full Text Available The article reviews the current situation and trends in the development of the language education in Russian technical universities, as well as the challenges towards its improvement. There set forth the goals and objectives of the foreign-language training system development, whereof the interdisciplinarity, modularity, networking and linguistic authenticity are of prime importance. Terms and conditions of the system performance effectiveness are specified and the concept of its generation is evaluated. As a result of the system research a model of the language education organization and management in a technical university is suggested. 

  20. The logic of Technical Standardisation

    DEFF Research Database (Denmark)

    Nedergaard, Peter

    In this paper technical standardisation is understood and explained in a model where economic analysis is coupled with an analysis of the political system as proposed in rational choice theory. The aim is to answer both the question why various countries (e.g. the United States versus European...... countries) let either the market or public intervention determine the mode of technical standardisation and the possible implications of these two ways of organizing technical standardisation from an economic and a political point of view. Based upon the analysis of the paper a couple of general policy...... recommendations are made concerning the mode of technical standardisation....

  1. Planning contract and networks of home services

    Directory of Open Access Journals (Sweden)

    José Eudoro Narváez Viteri

    2010-06-01

    Full Text Available This article highlights the worrying increase in public investment in infrastructure works due to deficiencies at the stage of study and design, particularly in public utility services networks. Some cities lack real technical drawings and updated underground networks, especially in the former. Hence, no reliable information is difficult to require contractors, consultants about study designs appropriate public service networks in evident contradiction with the principle of contractual planning.

  2. Wireless communications networks for the smart grid

    CERN Document Server

    Ho, Quang-Dung; Rajalingham, Gowdemy; Le-Ngoc, Tho

    2014-01-01

    This brief presents a comprehensive review of the network architecture and communication technologies of the smart grid communication network (SGCN). It then studies the strengths, weaknesses and applications of two promising wireless mesh routing protocols that could be used to implement the SGCN. Packet transmission reliability, latency and robustness of these two protocols are evaluated and compared by simulations in various practical SGCN scenarios. Finally, technical challenges and open research opportunities of the SGCN are addressed. Wireless Communications Networks for Smart Grid provi

  3. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Eggeman, Tim [ZeaChem Inc., Lakewood, CO (United States); O' Neill, Brian [ZeaChem Inc., Lakewood, CO (United States)

    2016-08-17

    ZeaChem Inc. and US DOE successfully demonstrated the ZeaChem process for producing sugars and ethanol from high-impact biomass feedstocks. The project was executed over a 5-year period under a $31.25 million cooperative agreement (80:20 Federal:ZeaChem cost share). The project was managed by dividing it into three budget periods. Activities during Budget Period 1 were limited to planning, permitting, and other pre-construction planning. Budget Period 2 activities included engineering, procurement, construction, commissioning, start-up and initial operations through the Independent Engineer Test Runs. The scope of construction was limited to the Chem Frac and Hydrogenolysis units, as the Core Facility was already in place. Construction was complete in December 2012, and the first cellulosic ethanol was produced in February 2013. Additional operational test runs were conducted during Budget Period 3 (completed June 2015) using hybrid poplar, corn stover, and wheat straw feedstocks, resulting in the production of cellulosic ethanol and various other biorefinery intermediates. The research adds to the understanding of the Chem Frac and Hydrogenolysis technologies in that the technical performance of each unit was measured, and the resulting data and operational experience can be used as the basis for engineering designs, thus mitigating risks for deployment in future commercial facilities. The Chem Frac unit was initially designed to be operated as two-stage dilute acid hydrolysis, with first stage conditions selected to remove the hemicellulose fraction of the feedstock, and the second stage conditions selected to remove the cellulose fraction. While the Chem Frac unit met or exceeded the design capacity of 10 ton(dry)/day, the technical effectiveness of the Chem Frac unit was below expectations in its initial two-stage dilute acid configuration. The sugars yields were low, the sugars were dilute, and the sugars had poor fermentability caused by excessive inhibitors

  4. Technical Math For Dummies

    CERN Document Server

    Schoenborn, Barry

    2010-01-01

    Technical Math For Dummies is your one-stop, hands-on guide to acing the math courses you’ll encounter as you work toward getting your degree, certifacation, or�license in the skilled trades. You’ll get easy-to-follow, plain-English guidance on mathematical formulas and methods that professionals use every day in the automotive, health, construction, licensed trades, maintenance, and other trades. You’ll learn how to apply concepts of algebra, geometry, and trigonometry and their formulas related to occupational areas of study. Plus, you’ll find out how to perform basic arithmetic

  5. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    John Tanis

    2005-11-25

    This document comprises the final technical report for atomic collisions research supported by DOE grant No. DE-FG02-87ER13778 from September 1, 2001 through August 31, 2004. The research involved the experimental investigation of excitation and charge-changing processes occurring in ion-atom and ion-molecule collisions. Major emphases of the study were: (1) interference effects resulting from coherent electron emission in H2, (2) production of doubly vacant K-shell (hollow ion) states due to electron correlation, and (3) formation of long-lived metastable states in electron transfer processes. During the period of the grant, this research resulted in 23 publications, 12 invited presentations, and 39 contributed presentations at national and international meetings and other institutions. Brief summaries of the completed research are presented below.

  6. Technical Training: ELEC-2005

    CERN Multimedia

    Davide Vitè

    2005-01-01

    ELEC-2005 - Electronics in High Energy Physics: Autumn Term (November-December 2005) ELEC-2005 is a new course series on modern electronics, given by CERN physicists and engineers within the framework of the 2005 Technical Training Programme, in an extended format of the ELEC-2002 course series. This new, comprehensive course series is designed for people who are not electronics specialists, for example physicists, engineers and technicians working at or visiting the laboratory, who use or will use electronics in their present or future activities, in particular in the context of the LHC accelerator and experiments. ELEC-2005 is composed of four Terms. The Winter (Introduction to electronics in HEP), Spring (Integrated circuits and VLSI technology for physics), and Summer (System electronics for physics: Issues) Terms already took place. The Autumn Term: Electronics applications in HEP experiments (November-December, 10 lectures) is now open for online registration, and will start on November 8th with the...

  7. LLNL 1981: technical horizons

    Energy Technology Data Exchange (ETDEWEB)

    1981-07-01

    Research programs at LLNL for 1981 are described in broad terms. In his annual State of the Laboratory address, Director Roger Batzel projected a $481 million operating budget for fiscal year 1982, up nearly 13% from last year. In projects for the Department of Energy and the Department of Defense, the Laboratory applies its technical facilities and capabilities to nuclear weapons design and development and other areas of defense research that include inertial confinement fusion, nonnuclear ordnances, and particle-beam technology. LLNL is also applying its unique experience and capabilities to a variety of projects that will help the nation meet its energy needs in an environmentally acceptable manner. A sampling of recent achievements by LLNL support organizations indicates their diversity. (GHT)

  8. Technical applications of aerogels

    Energy Technology Data Exchange (ETDEWEB)

    Hrubesh, L.W.

    1997-08-18

    Aerogel materials posses such a wide variety of exceptional properties that a striking number of applications have developed for them. Many of the commercial applications of aerogels such as catalysts, thermal insulation, windows, and particle detectors are still under development and new application as have been publicized since the ISA4 Conference in 1994: e.g.; supercapacitors, insulation for heat storage in automobiles, electrodes for capacitive deionization, etc. More applications are evolving as the scientific and engineering community becomes familiar with the unusual and exceptional physical properties of aerogels, there are also scientific and technical application, as well. This paper discusses a variety of applications under development at Lawrence Livermore National Laboratory for which several types of aerogels are formed in custom sizes and shapes. Particular discussions will focus on the uses of aerogels for physics experiments which rely on the exceptional, sometimes unique, properties of aerogels.

  9. Technical Training Seminar

    CERN Document Server

    2003-01-01

    Wednesday 19 November From 9:30 to 17:30 - IT Amphitheatre bldg.31 3-004 2003 Data Transmission Design Seminar - TEXAS INSTRUMENTS The one-day 2003 Data Transmission Design Seminar is part of a series of technical seminars produced by Texas Instruments. This series of seminars will introduce system solutions based on different standards according to their respective requirements. It will include topics containing a blend of basic principles and hands-on application examples, along with layout-guidelines. • Basics and Practical Examples of Data-Transmission • Low Voltage Differential Signaling (LVDS) • Connectivity and PC-based Links • Industrial Interfaces • Parallel Bus Systems and Clock-Distribution-Circuits (CDC) This Seminar will be of interest to hardware designers and system engineers dealing with the realization of system- or board-level interfaces based on various transmission standards. Language: English Free seminar, no registration Organiser: John ...

  10. Baca Geothermal Demonstration project legal and regulatory challenges. First semi-annual report for period through June 30, 1980

    Energy Technology Data Exchange (ETDEWEB)

    Province, S.G.; Walter, K.M.; Miller, J.

    1980-12-01

    The Legal and Regulatory Constraints Reports identify and describe the major legal and institutional constraints associated with the Baca Geothermal Demonstration Project. The impacts of these constraints on the Project in terms of cost, schedule, and technical design are also analyzed. The purpose of these reports is to provide a guide for future geothermal development.

  11. Analysis and Comparison on Novel Sensor Network Security Access Technology

    Directory of Open Access Journals (Sweden)

    Ping LIU

    2014-01-01

    Full Text Available The article introduces against technical defects of traditional network access control system, detail NAC, NAP, UAC and TNC four kinds of new network security access technology, and this article analyzes and compares them. Security framework for wireless sensor networks SPINS defines the mechanism and algorithm of complete and effective in confidentiality, point-to-point message authentication, integrity, authentication, broadcast authentication.

  12. Future of IoT Networks: A Survey

    National Research Council Canada - National Science Library

    Suk Kyu Lee; Mungyu Bae; Hwangnam Kim

    2017-01-01

    .... However, there are only limited discussions about the IoT network. In this paper, we will thoroughly analyze the technical details about the IoT network. Based on our survey of papers, we will provide insight about the future IoT network and the crucial components that will enable it.

  13. Predictors of employer satisfaction: technical and non-technical skills.

    Science.gov (United States)

    Danielson, Jared A; Wu, Tsui-Feng; Fales-Williams, Amanda J; Kirk, Ryan A; Preast, Vanessa A

    2012-01-01

    Employers of 2007-2009 graduates from Iowa State University College of Veterinary Medicine were asked to respond to a survey regarding their overall satisfaction with their new employees as well as their new employees' preparation in several technical and non-technical skill areas. Seventy-five responses contained complete data and were used in the analysis. Four technical skill areas (data collection, data interpretation, planning, and taking action) and five non-technical skill areas (interpersonal skills, ability to deal with legal issues, business skills, making referrals, and problem solving) were identified. All of the skill area subscales listed above had appropriate reliability (Cronbach's alpha>0.70) and were positively and significantly correlated with overall employer satisfaction. Results of two simultaneous regression analyses indicated that of the four technical skill areas, taking action is the most salient predictor of employer satisfaction. Of the five non-technical skill areas, interpersonal skills, business skills, making referrals, and problem solving were the most important skills in predicting employer satisfaction. Hierarchical regression analysis revealed that all technical skills explained 25% of the variation in employer satisfaction; non-technical skills explained an additional 42% of the variation in employer satisfaction.

  14. The network researchers' network

    DEFF Research Database (Denmark)

    Henneberg, Stephan C.; Jiang, Zhizhong; Naudé, Peter

    2009-01-01

    The Industrial Marketing and Purchasing (IMP) Group is a network of academic researchers working in the area of business-to-business marketing. The group meets every year to discuss and exchange ideas, with a conference having been held every year since 1984 (there was no meeting in 1987). In thi......The Industrial Marketing and Purchasing (IMP) Group is a network of academic researchers working in the area of business-to-business marketing. The group meets every year to discuss and exchange ideas, with a conference having been held every year since 1984 (there was no meeting in 1987......). In this paper, based upon the papers presented at the 22 conferences held to date, we undertake a Social Network Analysis in order to examine the degree of co-publishing that has taken place between this group of researchers. We identify the different components in this database, and examine the large main...

  15. 76 FR 38129 - Applications for New Awards; Americans With Disabilities Act (ADA) National Network Knowledge...

    Science.gov (United States)

    2011-06-29

    ... Applications for New Awards; Americans With Disabilities Act (ADA) National Network Knowledge Translation... Rehabilitation Research Projects (DRRP)--The ADA National Network Knowledge Translation Center Notice inviting..., demonstration, development, dissemination, utilization, and technical assistance. An applicant for assistance...

  16. Network cosmology.

    Science.gov (United States)

    Krioukov, Dmitri; Kitsak, Maksim; Sinkovits, Robert S; Rideout, David; Meyer, David; Boguñá, Marián

    2012-01-01

    Prediction and control of the dynamics of complex networks is a central problem in network science. Structural and dynamical similarities of different real networks suggest that some universal laws might accurately describe the dynamics of these networks, albeit the nature and common origin of such laws remain elusive. Here we show that the causal network representing the large-scale structure of spacetime in our accelerating universe is a power-law graph with strong clustering, similar to many complex networks such as the Internet, social, or biological networks. We prove that this structural similarity is a consequence of the asymptotic equivalence between the large-scale growth dynamics of complex networks and causal networks. This equivalence suggests that unexpectedly similar laws govern the dynamics of complex networks and spacetime in the universe, with implications to network science and cosmology.

  17. Network Cosmology

    Science.gov (United States)

    Krioukov, Dmitri; Kitsak, Maksim; Sinkovits, Robert S.; Rideout, David; Meyer, David; Boguñá, Marián

    2012-01-01

    Prediction and control of the dynamics of complex networks is a central problem in network science. Structural and dynamical similarities of different real networks suggest that some universal laws might accurately describe the dynamics of these networks, albeit the nature and common origin of such laws remain elusive. Here we show that the causal network representing the large-scale structure of spacetime in our accelerating universe is a power-law graph with strong clustering, similar to many complex networks such as the Internet, social, or biological networks. We prove that this structural similarity is a consequence of the asymptotic equivalence between the large-scale growth dynamics of complex networks and causal networks. This equivalence suggests that unexpectedly similar laws govern the dynamics of complex networks and spacetime in the universe, with implications to network science and cosmology. PMID:23162688

  18. Neural Networks in Control Applications

    DEFF Research Database (Denmark)

    Sørensen, O.

    The intention of this report is to make a systematic examination of the possibilities of applying neural networks in those technical areas, which are familiar to a control engineer. In other words, the potential of neural networks in control applications is given higher priority than a detailed...... examined, and it appears that considering 'normal' neural network models with, say, 500 samples, the problem of over-fitting is neglible, and therefore it is not taken into consideration afterwards. Numerous model types, often met in control applications, are implemented as neural network models...... Kalmann filter) representing state space description. The potentials of neural networks for control of non-linear processes are also examined, focusing on three different groups of control concepts, all considered as generalizations of known linear control concepts to handle also non-linear processes...

  19. Machinic Deconstruction : literature/ politics/ technics

    NARCIS (Netherlands)

    Ieven, Bram Koen

    2007-01-01

    Taking its cue from Jacques Derrida’s concept of différance, Machinic Deconstruction: Literature / Politics / Technics addresses the question whether it is possible to conceive of a work of technics that is operative at the same quasi-ontological level as différance itself. To do so, this study

  20. Teaching Technical Writing in Canada.

    Science.gov (United States)

    Eldridge, Elaine

    1990-01-01

    Reports the 1987 survey results of 70 Canadian colleges and universities regarding technical writing programs. Finds that half of the 35 responding institutions offer professional writing courses and that faculty attitudes range from enthusiastic to disapproving. Reveals that faculties at nonoffering institutions do not view technical writing as a…

  1. Technical Education and Economic Growth

    Indian Academy of Sciences (India)

    First page Back Continue Last page Graphics. Technical Education and Economic Growth. Technical Education and Economic Growth. Review of the Present Status. Expanding no.s and impairment of quality; Faculty shortage; Grim situation at Masters and PhD levels; Regional imbalance; Absence of International flavour ...

  2. The Digital technical documentation handbook

    CERN Document Server

    Schultz, Susan I; Kavanagh, Frank X; Morse, Marjorie J

    1993-01-01

    The Digital Technical Documentation Handbook describes the process of developing and producing technical user information at Digital Equipment Corporation. * Discusses techniques for making user information _more effective * Covers the draft and reviewprocess, the production and distribution of printed and electronic media, archiving, indexing, testing for usability, and many other topics * Provides quality assurance checklists, contains a glossary and a bibliography of resources for technicalcommunicators

  3. COMPASS Accelerator Design Technical Overview

    Energy Technology Data Exchange (ETDEWEB)

    Nanni, Emilio; Dolgashev, Valery; Tantawi, Sami; Neilson, Jeff; /SLAC

    2016-03-14

    This report is a survey of technical options for generating a MeV-class accelerator for space based science applications. The survey was performed focusing on the primary technical requirements of the accelerator in the context of a satellite environment with its unique challenges of limited electrical power (PE), thermal isolation, dimensions, payload requirement and electrical isolation.

  4. Hanford Site technical baseline database

    Energy Technology Data Exchange (ETDEWEB)

    Porter, P.E., Westinghouse Hanford

    1996-05-10

    This document includes a cassette tape that contains the Hanford specific files that make up the Hanford Site Technical Baseline Database as of May 10, 1996. The cassette tape also includes the delta files that delineate the differences between this revision and revision 3 (April 10, 1996) of the Hanford Site Technical Baseline Database.

  5. Hanford Site technical baseline database

    Energy Technology Data Exchange (ETDEWEB)

    Porter, P.E.

    1996-09-30

    This document includes a cassette tape that contains the Hanford specific files that make up the Hanford Site Technical Baseline Database as of September 30, 1996. The cassette tape also includes the delta files that dellinate the differences between this revision and revision 4 (May 10, 1996) of the Hanford Site Technical Baseline Database.

  6. Technical planning activity: Final report

    Energy Technology Data Exchange (ETDEWEB)

    1987-01-01

    In April 1985, the US Department of Energy's (DOE's) Office of Fusion Energy commissioned the Technical Planning Activity (TPA). The purpose of this activity was to develop a technical planning methodology and prepare technical plans in support of the strategic and policy framework of the Magnetic Fusion Program Plan issued by DOE in February 1985. Although this report represents the views of only the US magnetic fusion community, it is international in scope in the sense that the technical plans contained herein describe the full scope of the tasks that are prerequisites for the commercialization of fusion energy. The TPA has developed a well-structured methodology that includes detailed definitions of technical issues, definitions of program areas and elements, statements of research and development objectives, identification of key decision points and milestones, and descriptions of facility requirements.

  7. The SIM Time Network.

    Science.gov (United States)

    Lombardi, Michael A; Novick, Andrew N; Lopez R, J Mauricio; Jimenez, Francisco; de Carlos Lopez, Eduardo; Boulanger, Jean-Simon; Pelletier, Raymond; de Carvalho, Ricardo J; Solis, Raul; Sanchez, Harold; Quevedo, Carlos Andres; Pascoe, Gregory; Perez, Daniel; Bances, Eduardo; Trigo, Leonardo; Masi, Victor; Postigo, Henry; Questelles, Anthony; Gittens, Anselm

    2011-01-01

    The Sistema Interamericano de Metrologia (SIM) is a regional metrology organization (RMO) whose members are the national metrology institutes (NMIs) located in the 34 nations of the Organization of American States (OAS). The SIM/OAS region extends throughout North, Central, and South America and the Caribbean Islands. About half of the SIM NMIs maintain national standards of time and frequency and must participate in international comparisons in order to establish metrological traceability to the International System (SI) of units. The SIM time network (SIMTN) was developed as a practical, cost effective, and technically sound way to automate these comparisons. The SIMTN continuously compares the time standards of SIM NMIs and produces measurement results in near real-time by utilizing the Internet and the Global Positioning System (GPS). Fifteen SIM NMIs have joined the network as of December 2010. This paper provides a brief overview of SIM and a technical description of the SIMTN. It presents international comparison results and examines the measurement uncertainties. It also discusses the metrological benefits that the network provides to its participants.

  8. Networks as Tools for Sustainable Urban Development

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole; Tollin, Nicola

    Due to the increasing number of networks related to sustainable development (SUD) the paper focuses on understanding in which way networks can be considered useful tools for sustainable urban development, taking particularly into consideration the networks potential of spreading innovative policies......, strategies and actions. There has been little theoretically development on the subject. In practice networks for sustainable development can be seen as combining different theoretical approaches to networks, including governance, urban competition and innovation. To give a picture of the variety...... of sustainable networks, we present different examples of networks, operating at different geographical scales, from global to local, with different missions (organizational, political, technical), fields (lobbying, learning, branding) and its size. The potentials and challenges related to sustainable networks...

  9. Networks as Tools for Urban Sustainability

    DEFF Research Database (Denmark)

    Jensen, Jesper Ole; Tollin, Nicola

    2004-01-01

    Due to the increasing number of networks related to sustainable development (SUD) the paper focuses on understanding in which way networks can be considered useful tools for sustainable urban development, taking particularly into consideration the networks potential of spreading innovative policies......, strategies and actions. There has been little theoretically development on the subject. In practice networks for sustainable development can be seen as combining different theoretical approaches to networks, including governance, urban competition and innovation. To give a picture of the variety...... of sustainable networks, we present different examples of networks, operating at different geographical scales, from global to local, with different missions (organizational, political, technical), fields (lobbying, learning, branding) and its size. The potentials and challenges related to sustainable networks...

  10. Service Differentiation in Residential Broadband Networks

    DEFF Research Database (Denmark)

    Sigurdsson, Halldór Matthias

    2004-01-01

    As broadband gains widespread adoption with residential users, revenue generating voice- and video-services have not yet taken off. This slow uptake is often attributed to lack of Quality of Service management in residential broadband networks. To resolve this and induce service variety, network...... access providers are implementing service differentiation in their networks where voice and video gets prioritised before data. This paper discusses the role of network access providers in multipurpose packet based networks and the available migration strategies for supporting multimedia services...... in digital subscriber line (DSL) based residential broadband networks. Four possible implementation scenarios and their technical characteristics and effects are described. To conclude, the paper discusses how network access providers can be induced to open their networks for third party service providers....

  11. Home care as change of the technical-assistance model.

    Science.gov (United States)

    Silva, Kênia Lara; de Sena, Roseni Rosângela; Seixas, Clarissa Terenzi; Feuerwerker, Laura Camargo Macruz; Merhy, Emerson Elias

    2010-02-01

    To analyze home care practices of outpatient and hospital services and their constitution as a substitute healthcare network. A qualitative study was carried out using tracer methodology to analyze four outpatient home care services from the Municipal Health Department and one service from a philanthropic hospital in the municipality of Belo Horizonte, Southeastern Brazil, between 2005 and 2007. The following procedures were carried out: interviews with the home care services' managers and teams, analysis of documents and follow-up of cases, holding interviews with patients and caregivers. The analysis was guided by the analytical categories home care integration into the healthcare network and technical-assistance model. Home care implementation was preceded by a political-institutional decision, both with a rationalizing orientation, intending to promote cost reduction, and also with the aim of carrying out the technical-assistance rearrangement of the healthcare networks. These two types of orientation were found to be in conflict, which implies difficulties for conciliating interests of the different players involved in the network, and also the creation of shared management spaces. It was possible to identify technological innovation and families' autonomy in the implementation of the healthcare projects. The teams proved to be cohesive, constructing, in the daily routine, new forms of integrating different perspectives so as to transform the healthcare practices. Challenges were observed in the proposal of integrating the different substitutive healthcare services, as the home care services' capacity to change the technical-assistance model is limited. Home care has potential for constituting a substitutive network by producing new care modalities that cross the projects of users, family members, social network, and home care professionals. Home care as a substitute healthcare modality requires political, conceptual and operational sustainability, as well as

  12. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Dmitriy Y. Anistratov; Marvin L. Adams; Todd S. Palmer; Kord S. Smith; Kevin Clarno; Hikaru Hiruta; Razvan Nes

    2003-08-04

    OAK B202 Final Technical Report. The present generation of reactor analysis methods uses few-group nodal diffusion approximations to calculate full-core eigenvalues and power distributions. The cross sections, diffusion coefficients, and discontinuity factors (collectively called ''group constants'') in the nodal diffusion equations are parameterized as functions of many variables, ranging from the obvious (temperature, boron concentration, etc.) to the more obscure (spectral index, moderator temperature history, etc.). These group constants, and their variations as functions of the many variables, are calculated by assembly-level transport codes. The current methodology has two main weaknesses that this project addressed. The first weakness is the diffusion approximation in the full-core calculation; this can be significantly inaccurate at interfaces between different assemblies. This project used the nodal diffusion framework to implement nodal quasidiffusion equations, which can capture transport effects to an arbitrary degree of accuracy. The second weakness is in the parameterization of the group constants; current models do not always perform well, especially at interfaces between unlike assemblies. The project developed a theoretical foundation for parameterization and homogenization models and used that theory to devise improved models. The new models were extended to tabulate information that the nodal quasidiffusion equations can use to capture transport effects in full-core calculations.

  13. FINAL TECHNICAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    STEFAN VASILE; ZHENG LI

    2010-06-17

    High-resolution tracking detectors based on Active Pixel Sensor (APS) have been valuable tools in Nuclear Physics and High-Energy Physics research, and have contributed to major discoveries. Their integration time, radiation length and readout rate is a limiting factor for the planed luminosity upgrades in nuclear and high-energy physics collider-based experiments. The goal of this program was to demonstrate and develop high-gain, high-resolution tracking detector arrays with faster readout, and shorter radiation length than APS arrays. These arrays may operate as direct charged particle detectors or as readouts of high resolution scintillating fiber arrays. During this program, we developed in CMOS large, high-resolution pixel sensor arrays with integrated readout, and reset at pixel level. Their intrinsic gain, high immunity to surface and moisture damage, will allow operating these detectors with minimal packaging/passivation requirements and will result in radiation length superior to APS. In Phase I, we designed and fabricated arrays with calorimetric output capable of sub-pixel resolution and sub-microsecond readout rate. The technical effort was dedicated to detector and readout structure development, performance verification, as well as to radiation damage and damage annealing.

  14. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Thursday 4 September From 14:00 to 17:00 - Training Centre Auditorium bldg. 593, room 11 The Summit Design VisualElite 4.0 Release Jean Marie St Paul / SUMMIT DESIGN, Europe, Technical Manager Michel Delcroix / SUMMIT DESIGN, Southern Europe, Sales F-95015 CERGY PONTOISE, France Summit Design is an important EDA digital hardware design tool supplier, and the industry leader in the emerging Electronic System Level design domain. Its VisualElite program has been used at CERN for several years. This seminar will include the highlights of the program's latest release. It will be illustrated how Summit Design products can provide a high-level C/C++ and SystemC functional modelling design and verification environment, enabling engineers to analyse system concepts before the implementation stage. The seminar will show how mixed SystemC and HDL simulation can be done, along with solutions for hardware/software development. • HDL new features: Connectivity Table Editor. Xemacs full integration. New NCsi...

  15. Technical Training Seminar

    CERN Multimedia

    2003-01-01

    Thursday 4 September From 14:00 to 17:00 - Training Centre Auditorium bldg. 593, room 11 The Summit Design VisualElite 4.0 Release Jean Marie St Paul / SUMMIT DESIGN, Europe, Technical Manager Michel Delcroix / SUMMIT DESIGN, Southern Europe, Sales F-95015 CERGY PONTOISE, France Summit Design is an important EDA digital hardware design tool supplier, and the industry leader in the emerging Electronic System Level design domain. Its VisualElite program has been used at CERN for several years. This seminar will include the highlights of the program's latest release. It will be illustrated how Summit Design products can provide a high-level C/C++ and SystemC functional modelling design and verification environment, enabling engineers to analyse system concepts before the implementation stage. The seminar will show how mixed SystemC and HDL simulation can be done, along with solutions for hardware/software development. • HDL new features: Connectivity Table Editor. Xemacs full integration. New NCsim ...

  16. GEM Technical Design Report

    Energy Technology Data Exchange (ETDEWEB)

    1993-07-31

    The GEM collaboration was formed in June 1991 to develop a major detector for the SSC. The primary physics objectives of GEM are those central to the motivation for the SSC, to study high p{sub T} physics - exemplified by the search for Higgs bosons - and to search for new physics beyond the standard model. The authors present in this Technical Design Report (TDR) a detector with broad capabilities for the discovery and subsequent study of electroweak symmetry breaking, the origin of mass and flavor, and other physics requiring precise measurements of gammas, electrons, and muons - hence the name, GEM. In addition, as a design goal, they have taken care to provide the robustness needed to do the physics that requires high luminosity. Finally, good coverage and hermeticity allow the detection of missing transverse energy, E{sub T}. The GEM design emphasizes clean identification and high resolution measurement of the primary physics signatures for high p{sub T} physics. The approach is to make precise energy measurements that maximize the sensitivity to rare narrow resonances, to detect the elementary interaction products (quarks, leptons, and photons), and to build in the features required to reduce backgrounds.

  17. AIMES Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Katz, Daniel S [Univ. of Illinois, Urbana-Champaign, IL (United States). National Center for Supercomputing Applications (NCSA); Jha, Shantenu [Rutgers Univ., New Brunswick, NJ (United States); Weissman, Jon [Univ. of Minnesota, Minneapolis, MN (United States); Turilli, Matteo [Rutgers Univ., New Brunswick, NJ (United States)

    2017-01-31

    This is the final technical report for the AIMES project. Many important advances in science and engineering are due to large-scale distributed computing. Notwithstanding this reliance, we are still learning how to design and deploy large-scale production Distributed Computing Infrastructures (DCI). This is evidenced by missing design principles for DCI, and an absence of generally acceptable and usable distributed computing abstractions. The AIMES project was conceived against this backdrop, following on the heels of a comprehensive survey of scientific distributed applications. AIMES laid the foundations to address the tripartite challenge of dynamic resource management, integrating information, and portable and interoperable distributed applications. Four abstractions were defined and implemented: skeleton, resource bundle, pilot, and execution strategy. The four abstractions were implemented into software modules and then aggregated into the AIMES middleware. This middleware successfully integrates information across the application layer (skeletons) and resource layer (Bundles), derives a suitable execution strategy for the given skeleton and enacts its execution by means of pilots on one or more resources, depending on the application requirements, and resource availabilities and capabilities.

  18. Bulletin Survey: Technical clarifications

    CERN Multimedia

    2002-01-01

    In the latest of our articles on the results of the Bulletin survey, we respond to some of your technical comments on the Electronic Bulletin. Many thanks to the more than 500 of you who completed the questionnaire. The full statistics will be published next week. 'It takes too long to download the pages' Yes, it's true that the Electronic Bulletin's download time isn't perfect but it will improve when the Bulletin migrates to another, faster database. 'I find it very difficult to locate all the articles' Some people experience difficulty negotiating their way through the Bulletin once they have entered a specific section. The blue column on the left contains an 'In this issue' link taking you to the other sections. What's more, the whole of the paper Bulletin is available in the electronic version. As the latter is relatively new, however, it will take a bit of time to get used to browsing through it. Many of you say that it's still too early to form an opinion. 'Pull-down menus would be good, so that yo...

  19. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide VITÈ

    2002-01-01

    Wednesday 6 March   from 9:30 to 16:45 - IT Auditorium - bldg. 31 3-004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars pages here or con...

  20. TECHNICAL TRAINING SEMINAR

    CERN Multimedia

    Davide Vitè

    2002-01-01

    Wednesday 6 March from 9:30 to 16:45 - IT Auditorium - bldg. 31 3-004 Analog Devices DSP Day Thorsten Kistler (Application Engineer), Steffen Boerner (Product Specialist) / ANALOG DEVICES Munich Trying to meet your design challenges, Analog Devices compiles application information and offers chipsets, software, reference designs and mixed-signal, application specific DSPs, for a range of real-time signal processing applications. This seminar will present the latest 16bit fixed-point and 32bit floating-point DSPs (roadmaps; internal architectures, blocks, features benchmarks), with their software, development kits and emulators: Fixed-Point DSP-Family, ADSP-218x and ADSP-219x Blackfin DSP SHARC-Family, 2106x and 2116x TigerSHARC Industrial Contact: François Caloz, Sasco-Spoerle GmbH Language: English Free seminar, no registration Organiser: Davide Vitè / HR-TD / 75141 Davide.Vite@cern.ch Please read the full information on the Technical Training Seminars pages here or contact the organiser.

  1. Waste Management Technical Manual

    Energy Technology Data Exchange (ETDEWEB)

    Buckingham, J.S. [ed.

    1967-08-31

    This Manual has been prepared to provide a documented compendium of the technical bases and general physical features of Isochem Incorporated`s Waste Management Program. The manual is intended to be used as a means of training and as a reference handbook for use by personnel responsible for executing the Waste Management Program. The material in this manual was assembled by members of Isochem`s Chemical Processing Division, Battelle Northwest Laboratory, and Hanford Engineering Services between September 1965 and March 1967. The manual is divided into the following parts: Introduction, contains a summary of the overall Waste Management Program. It is written to provide the reader with a synoptic view and as an aid in understanding the subsequent parts; Feed Material, contains detailed discussion of the type and sources of feed material used in the Waste Management Program, including a chapter on nuclear reactions and the formation of fission products; Waste Fractionization Plant Processing, contains detailed discussions of the processes used in the Waste Fractionization Plant with supporting data and documentation of the technology employed; Waste Fractionization Plant Product and Waste Effluent Handling, contains detailed discussions of the methods of handling the product and waste material generated by the Waste Fractionization Plant; Plant and Equipment, describes the layout of the Waste Management facilities, arrangement of equipment, and individual equipment pieces; Process Control, describes the instruments and analytical methods used for process control; and Safety describes process hazards and the methods used to safeguard against them.

  2. Technical training - Places available

    CERN Multimedia

    Davide Vitè

    2006-01-01

    Places available as of 16.5.2006 (May-November course sessions) Technical Training: Places available The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: Title Hours Date Language ACROBAT 7.0 : Utilisation de fichiers PDF 8 8.05.06 F WORD 2003 - niveau 2 : ECDL 16 22-23.05.06 23-24.05.06 F Comprehensive VHDL for FPGA Design 40 29.05-2.06.06 E C++ Programming Part 2 - Advanced C++ and its Traps and Pitfalls 32 30.05-2.06.06 E ACROBAT 7.0 : Utilisation de fichiers PDF 24 7-9.06.06 E AutoCAD Mechanical 2006 16 13-14.06.06 F CERN EDMS for Local Administrators 16 13-14.06.06 E LabVIEW Base 2 32 27.06-5.07.06 F C++ Programming Part 3 - Templates and the STL (Standard Template Library) 16 27-28.06.06 E C++ Programming Part 4 - Exceptions 8 29.06.06 E FrontPage 2003 - niveau 1 16 29-...

  3. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Stoessel, Chris

    2013-11-13

    This project developed a new high-performance R-10/high SHGC window design, reviewed market positioning and evaluated manufacturing solutions required for broad market adoption. The project objectives were accomplished by: identifying viable technical solutions based on modeling of modern and potential coating stacks and IGU designs; development of new coating material sets for HM thin film stacks, as well as improved HM IGU designs to accept multiple layers of HM films; matching promising new coating designs with new HM IGU designs to demonstrate performance gains; and, in cooperation with a window manufacturer, assess the potential for high-volume manufacturing and cost efficiency of a HM-based R-10 window with improved solar heat gain characteristics. A broad view of available materials and design options was applied to achieve the desired improvements. Gated engineering methodologies were employed to guide the development process from concept generation to a window demonstration. The project determined that a slightly de-rated window performance allows formulation of a path to achieve the desired cost reductions to support end consumer adoption.

  4. Technical Training: Places available

    CERN Document Server

    Monique Duval

    2005-01-01

    The number of places available may vary. Please check our Web site to find out the current availability. Places are available on the following courses: PowerPoint 2003 (F) : 25.4.2005 (1 jour) WORD 2003 - niveau 1 : 2 & 3.5.2005 (2 jours) FrontPage 2003 - niveau 1 : 9 & 10.5.2005 (2 jours) ANSYS Workbench (F) : 9 - 12.5.2005 (4 jours) ELEC-2005 - Summer Term: System electronics for physics - Issues : 10, 12, 17, 19, 24, 26 & 31.5.2005 (7 x 2h lectures) AutoCAD 2005 - niveau 1 : 11, 12, 18, 19.5.2005 (4 jours) ACCESS 2003 - Level 1: ECDL M5 : 11 & 12.5.2005 (2 days) La technique du vide : 12 & 13.5.2005 (2 jours) Finite State Machines in the JCOP Framework: 24 - 26.5.2005 (3 days) The Joint PVSS JCOP Framework: 30.5 - 3.6.2005 (5 days) LabVIEW Migration 6 to 7: 14.6.2005 (1 day) Introduction to ANSYS: 21 - 24.6.2005 (4 days) ENSEIGNEMENT TECHNIQUE TECHNICAL TRAINING Monique Duval 74924 tech...

  5. Bibliography - Technical Reports, Special Reports, and Technical Notes, FY 1981.

    Science.gov (United States)

    1982-03-01

    AD-A113 798 NAVY PERSONNEL RESEARCH AND DEVELOPMENT CENTER SAN D--ETC F/6 5/9 BIBLIOGRAPHY - TECHNICAL REPORTS. SPECIAL REPORTS. AND TECHNICA-ETC( U ...TH4IS PAGE ( MOM , Dole gnto,.d) FOREWORD This report lists all technical reports, special reports, and technical notes that were published by this Center...TR 81-16. July 1981. J. I. Borack and K. W. Gay . (AD-A102 910) A new computerized management system, the structured accession planning (STRAP) system

  6. Ideal Based Cyber Security Technical Metrics for Control Systems

    Energy Technology Data Exchange (ETDEWEB)

    W. F. Boyer; M. A. McQueen

    2007-10-01

    Much of the world's critical infrastructure is at risk from attack through electronic networks connected to control systems. Security metrics are important because they provide the basis for management decisions that affect the protection of the infrastructure. A cyber security technical metric is the security relevant output from an explicit mathematical model that makes use of objective measurements of a technical object. A specific set of technical security metrics are proposed for use by the operators of control systems. Our proposed metrics are based on seven security ideals associated with seven corresponding abstract dimensions of security. We have defined at least one metric for each of the seven ideals. Each metric is a measure of how nearly the associated ideal has been achieved. These seven ideals provide a useful structure for further metrics development. A case study shows how the proposed metrics can be applied to an operational control system.

  7. Sustainability and deliberate transition of socio-technical systems

    DEFF Research Database (Denmark)

    Hansen, Ole Erik; Søndergård, Bent; Stærdahl, Jens

    or developing socio-technical systems in order to integrate the concept of sustainability as a driver for the deliberate and purposeful shaping and transition. The article discusses the requirements to effective governance networks and governing of governance networks. Research within innovation systems......, transition management and technology systems combined with planning and experimental activities provides both a theoretical and empirical body of knowledge of such governance processes. The article discusses how this perspective can be used in relation to the process of developing bio-fuel systems......The article suggests that deliberate planning for sustainability demands a focus on the transition of socio-technical systems in order to establish robust and more sustainable patterns of production and consumption. This implies the necessity of a new perspective for environmental planning...

  8. Design and Management of Networked Information Systems

    DEFF Research Database (Denmark)

    Havn, Erling; Bansler, Jørgen P.

    1996-01-01

    -based IS. There are several reasons for this: (a) Networked IS are large and complex systems; (b) in most cases, one has to deal with a number of existing - probably heterogenous - technical hardware and software platforms and link them together in a network; (c) differences in organizational culture, work......In this paper, we present a newly started research project at the Center for Tele-Information at the Technical University of Denmark. The project focuses on the design and management of networked information systems, that is computer-based IS linked by a wide area network and supporting...... communication between geographically dispersed organizational units. Examples include logistics systems, airline booking systems, and CSCW systems. We assume that the design and implementation of networked IS is significantly more difficult and risky than the development of traditional "stand-alone" computer...

  9. Telecommunication networks

    CERN Document Server

    Iannone, Eugenio

    2011-01-01

    Many argue that telecommunications network infrastructure is the most impressive and important technology ever developed. Analyzing the telecom market's constantly evolving trends, research directions, infrastructure, and vital needs, Telecommunication Networks responds with revolutionized engineering strategies to optimize network construction. Omnipresent in society, telecom networks integrate a wide range of technologies. These include quantum field theory for the study of optical amplifiers, software architectures for network control, abstract algebra required to design error correction co

  10. TECHNICAL CULTURE AND HUMAN AXJOSPHERE

    Directory of Open Access Journals (Sweden)

    ­Krystyna Chałas

    2014-11-01

    Full Text Available Technical culture is the value of each historical period. It is the subject of the ongoing development. While it is a value which is associated with different categories of values, mainly material, cognitive, social. Between culture and these three categories of values ​ there is a cognitive effect. Technical culture determines the quality of human axjosphere. The aim of this study is to show the relationships and dependencies between technical culture and the structures in which a person lives and works. It is mainly about the answer to the question of which values of technical culture are closely related to and what are the inter dependencies? The primary task is to define the concept of the technical culture and to show its teaching essence. The second task boils down to indicate the range of values ​​inherent in the culture of technology, determining the value of the technological culture and values, which are developed by the technical culture. Indication of the interaction between the technical culture and values ​​is the third task.

  11. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Aristos Aristidou Natureworks); Robert Kean (NatureWorks); Tom Schechinger (IronHorse Farms, Mat); Stuart Birrell (Iowa State); Jill Euken (Wallace Foundation & Iowa State)

    2007-10-01

    The two main objectives of this project were: 1) to develop and test technologies to harvest, transport, store, and separate corn stover to supply a clean raw material to the bioproducts industry, and 2) engineer fermentation systems to meet performance targets for lactic acid and ethanol manufacturers. Significant progress was made in testing methods to harvest corn stover in a “single pass” harvest mode (collect corn grain and stover at the same time). This is technically feasible on small scale, but additional equipment refinements will be needed to facilitate cost effective harvest on a larger scale. Transportation models were developed, which indicate that at a corn stover yield of 2.8 tons/acre and purchase price of $35/ton stover, it would be unprofitable to transport stover more than about 25 miles; thus suggesting the development of many regional collection centers. Therefore, collection centers should be located within about 30 miles of the farm, to keep transportation costs to an acceptable level. These collection centers could then potentially do some preprocessing (to fractionate or increase bulk density) and/or ship the biomass by rail or barge to the final customers. Wet storage of stover via ensilage was tested, but no clear economic advantages were evident. Wet storage eliminates fire risk, but increases the complexity of component separation and may result in a small loss of carbohydrate content (fermentation potential). A study of possible supplier-producer relationships, concluded that a “quasi-vertical” integration model would be best suited for new bioproducts industries based on stover. In this model, the relationship would involve a multiyear supply contract (processor with purchase guarantees, producer group with supply guarantees). Price will likely be fixed or calculated based on some formula (possibly a cost plus). Initial quality requirements will be specified (but subject to refinement).Producers would invest in harvest

  12. Field convergence between technical writers and technical translators

    DEFF Research Database (Denmark)

    Gnecchi, M.; Maylath, B.; Mousten, Birthe

    2011-01-01

    As translation of technical documents continues to grow rapidly and translation becomes more automated, the roles of professional communicators and translators appear to be converging. This paper updates preliminary findings first presented at the 2008 International Professional Communication...

  13. RAMP 2005 technical report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-04-26

    This technical report provided details of all monitoring activities conducted by the Regional Aquatics Monitoring Program (RAMP), which was initiated in 1997 to examine the impacts of oil sands mining development on aquatic systems in the region. RAMP's objective is to integrate aquatic monitoring activities in order to identify long-term trends and regional issues related to the environment in the Regional Municipality of Wood Buffalo. In 2005, RAMP focused on key components of boreal aquatic ecosystems. This report provided full outlines of all climate and hydrology monitoring activities; water and sedimentation analyses; and studies of benthic communities in rivers, lakes, and deltas. Sets of measurements endpoints were used to represent the health and integrity of valued environmental resources. Satellite imager was used to estimate activities related to oil sands developments. The report was divided into subsections which related monitoring activities for various rivers and tributaries in the region. Small and negligible calculated changes were observed in hydrologic conditions in the Athabasca River mainstem. No discernible changes in water and sediment quality were observed that could positively be ascribed to oil sands developments in the region. Very little evidence suggested that fish populations had changed as a result of increased activities in the region. The influence of oil sands development activities on the aquatic resources of the Athabasca River mainstem were minor and mostly undetectable. The results of fish tissue studies from the lower Athabasca River showed that concentrations of mercury in fish tissues occurred at levels that posed a high risk to subsistence fishers. A higher number of metal concentrations in some lakes in the region was attributed to natural causes. The results of a sentinel species monitoring program conducted at the Ells River watershed were also included. Recommendations for further refining RAMP programs were also

  14. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Juan Camilo Serrano

    2011-12-16

    New and novel material and process technologies applied in wind blade designs and production are critical to increasing the competitiveness of wind power generation against traditional sources of energy. In this project, through collaboration between PPG Industries and MAG Industrial Automation Systems, the potential of using automated manufacturing for the production of fiber glass composite wind blades was evaluated from both technical and economic points of view. Further, it was demonstrated that by modifying the standard blade raw material forms through the use of cost effective pre-impregnated rovings coupled with using an automated fiber placement machine to lay up the parts, it is possible to produce state of the art composite laminates with significantly improved mechanical performance and with higher processing rates than standard blade production technology allows for today, thereby lowering the cost of energy over turbine blades made using traditional processes and materials. In conformity with the scope of work of the submitted proposal, the project team completed each task and documented and reported its findings on the appropriate quarterly report submitted to the DOE project team. The activities and this report are divided into 5 subtasks: (1) Material Investigation - Reviews traditional materials and key specifications and testing methods; (2) Manufacturing and Automation - Identifies new candidate material forms and automated layup processes; (3) Process Development - Performs trials of candidate materials and processes; (4) Predictive Analysis - Assesses impact of new material forms and automated processes on a model blade design; and (5) Feasibility Assessment - Compares traditional manufacturing processes and materials to new candidate material forms and automated processes.

  15. Using Technical Performance Measures

    Science.gov (United States)

    Garrett, Christopher J.; Levack, Daniel J. H.; Rhodes, Russel E.

    2011-01-01

    All programs have requirements. For these requirements to be met, there must be a means of measurement. A Technical Performance Measure (TPM) is defined to produce a measured quantity that can be compared to the requirement. In practice, the TPM is often expressed as a maximum or minimum and a goal. Example TPMs for a rocket program are: vacuum or sea level specific impulse (lsp), weight, reliability (often expressed as a failure rate), schedule, operability (turn-around time), design and development cost, production cost, and operating cost. Program status is evaluated by comparing the TPMs against specified values of the requirements. During the program many design decisions are made and most of them affect some or all of the TPMs. Often, the same design decision changes some TPMs favorably while affecting other TPMs unfavorably. The problem then becomes how to compare the effects of a design decision on different TPMs. How much failure rate is one second of specific impulse worth? How many days of schedule is one pound of weight worth? In other words, how to compare dissimilar quantities in order to trade and manage the TPMs to meet all requirements. One method that has been used successfully and has a mathematical basis is Utility Analysis. Utility Analysis enables quantitative comparison among dissimilar attributes. It uses a mathematical model that maps decision maker preferences over the tradeable range of each attribute. It is capable of modeling both independent and dependent attributes. Utility Analysis is well supported in the literature on Decision Theory. It has been used at Pratt & Whitney Rocketdyne for internal programs and for contracted work such as the J-2X rocket engine program. This paper describes the construction of TPMs and describes Utility Analysis. It then discusses the use of TPMs in design trades and to manage margin during a program using Utility Analysis.

  16. Final Technical Report

    Energy Technology Data Exchange (ETDEWEB)

    Joseph Junker; Greg Wheeler

    2007-02-26

    Since 1986 the Oregon State University Industrial Assessment Center (OSU IAC) has worked to increase the energy efficiency, productivity, sustainability, and competitiveness of US manufacturers; provide engineering students an education not available in the classroom; keep engineering faculty in contact with technology and challenges in Northwest industry; and reduce dependence on nonrenewable energy resources, both imported and domestic. Project Objective: Over the duration of this project (2002-2006), the OSU IAC worked to directly support and influence industrial decisions primarily regarding energy but also regarding sustainability and profitability through: Assessments & Follow-up: The OSU IAC performed 111 Industrial Assessments in Oregon, Washington, Idaho and Nevada to help industry identify and implement opportunities to increase energy efficiency, productivity, sustainability, and competitiveness Workshops Seminars Forums Etc: OSU IAC staff worked with regional peers to offer appropriate workshops and trainings as opportunities availed themselves. Graduating Excellent Energy Aware Professional Alumni: As technically capable, skilled written and verbal communicators, our alumni contributed to OSU IAC influence from their positions within industry, consulting organizations, utilities, and governmental and non governmental agencies. Tool Development: Analysis tools and guides originated at the OSU IAC extended our reach. The center continually worked to develop computer based analysis tools, evaluation checklists, analysis guide sheets for internal use and general sharing with industry, energy, and other professionals to assist them in efforts to improve US Industry. Impact: Over 20 years of activity the OSU IAC has typically performed 25 Industrial Assessments a year. On average, each year of 25 assessments has resulted in implemented projects that saved industry a total of: 25.3 TBTU in annual energy and $4.5 Million annually, with an average investment

  17. CTBT technical issues handbook

    Energy Technology Data Exchange (ETDEWEB)

    Zucca, J.J. [ed.

    1994-05-01

    The purpose of this handbook is to give the nonspecialist in nuclear explosion physics and nuclear test monitoring an introduction to the topic as it pertains to a Comprehensive Test Ban Treaty (CTBT). The authors have tried to make the handbook visually oriented, with figures paired to short discussions. As such, the handbook may be read straight through or in sections. The handbook covers four main areas and ends with a glossary, which includes both scientific terms and acronyms likely to be encountered during CTBT negotiations. The following topics are covered: (1) Physics of nuclear explosion experiments. This is a description of basic nuclear physics and elementary nuclear weapon design. Also discussed are testing practices. (2) Other nuclear experiments. This section discusses experiments that produce small amounts of nuclear energy but differ from explosion experiments discussed in the first chapter. This includes the type of activities, such as laser fusion, that would continue after a CTBT is in force. (3) Monitoring tests in various environments. This section describes the different physical environments in which a test could be conducted (underground, in the atmosphere, in space, underwater, and in the laboratory); the sources of non-nuclear events (such as earthquakes and mining operations); and the opportunities for evasion. (4) On-site inspections. A CTBT is likely to include these inspections as an element of the verification provisions, in order to resolve the nature of ambiguous events. This chapter describes some technical considerations and technologies that are likely to be useful. (5) Selecting verification measures. This chapter discusses the uncertain nature of the evidence from monitoring systems and how compliance judgments could be made, taking the uncertainties into account. It also discusses how to allocate monitoring resources, given the likelihood of testing by various countries in various environments.

  18. LHC Availability 2017: Technical Stop 1 to Technical Stop 2

    CERN Document Server

    Todd, Benjamin; Apollonio, Andrea; Walsh, David John; CERN. Geneva. ATS Department

    2017-01-01

    This document summarises the LHC machine availability for the period of Technical Stop 1 (TS1) to Technical Stop 2 (TS2) in 2017. This period was dedicated to proton physics with a bunch spacing of 25ns. This note has been produced and ratified by the Availability Working Group which has complied fault information for the period in question using the Accelerator Fault Tracker.

  19. Surgeons' non-technical skills.

    Science.gov (United States)

    Yule, Steven; Paterson-Brown, Simon

    2012-02-01

    The importance of non-technical skills to surgical performance is gaining wide acceptance. This article discusses the core cognitive and social skills categories thought to underpin medical knowledge and surgical expertise, and describes the rise of non-technical skill models of assessment in surgery. Behavior rating systems such as NOTSS (Non-Technical Skills for Surgeons) have been developed to support education and assessment in this regard. We now understand more about these critical skills and how they impact surgery. The challenge in the future is to incorporate them into undergraduate teaching, postgraduate training, workplace assessment, and perhaps even selection. Copyright © 2012 Elsevier Inc. All rights reserved.

  20. The international RESPO network

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-12-01

    Winrock International, with sponsorship from the Center for Environment of the U.S. Agency for International Development (USAID) and the U.S. Export Council for Renewable Energy (US/ECRE), is building a global network of non-governmental organizations to help catalyze the use of renewable energy technologies for rural energy supply in developing countries. Known as the Renewable Energy Project Support Offices (REPSOs), these in-country facilities are managed by local institutions in coordination with Winrock. REPSOs provide an array of technical and financial support services to help developers identify and evaluate opportunities for renewable energy projects.

  1. Privacy in Social Networks

    CERN Document Server

    Zheleva, Elena

    2012-01-01

    This synthesis lecture provides a survey of work on privacy in online social networks (OSNs). This work encompasses concerns of users as well as service providers and third parties. Our goal is to approach such concerns from a computer-science perspective, and building upon existing work on privacy, security, statistical modeling and databases to provide an overview of the technical and algorithmic issues related to privacy in OSNs. We start our survey by introducing a simple OSN data model and describe common statistical-inference techniques that can be used to infer potentially sensitive inf

  2. Challenges in Second-Generation Wireless Mesh Networks

    Directory of Open Access Journals (Sweden)

    Pescapé Antonio

    2008-01-01

    Full Text Available Wireless mesh networks have the potential to provide ubiquitous high-speed Internet access at low costs. The good news is that initial deployments of WiFi meshes show the feasibility of providing ubiquitous Internet connectivity. However, their performance is far below the necessary and achievable limit. Moreover, users' subscription in the existing meshes is dismal even though the technical challenges to get connectivity are low. This paper provides an overview of the current status of mesh networks' deployment, and highlights the technical, economical, and social challenges that need to be addressed in the next years. As a proof-of-principle study, we discuss the above-mentioned challenges with reference to three real networks: (i MagNets, an operator-driven planned two-tier mesh network; (ii Berlin Freifunk network as a pure community-driven single-tier network; (iii Weimar Freifunk network, also a community-driven but two-tier network.

  3. Deployment and Automated Technical Order Support

    Science.gov (United States)

    1989-02-01

    Bureaucracy ....................................... 8 2 Technical Order Distribution Office Organization ................................... 9 3 Volume...20 Shop or per TODS TOs Workstation Figure 2. Technical Order Distribution Office Organization . 9 The Nature of Technical Orders Several factors have

  4. MedlinePlus Connect: Technical Information

    Science.gov (United States)

    ... page: https://medlineplus.gov/connect/technical.html MedlinePlus Connect: Technical Information To use the sharing features on ... Information Page Web Service Technical Information Page MedlinePlus Connect Implementation Options Web Application How does it work? ...

  5. The Colombia Seismological Network

    Science.gov (United States)

    Blanco Chia, J. F.; Poveda, E.; Pedraza, P.

    2013-05-01

    The latest seismological equipment and data processing instrumentation installed at the Colombia Seismological Network (RSNC) are described. System configuration, network operation, and data management are discussed. The data quality and the new seismological products are analyzed. The main purpose of the network is to monitor local seismicity with a special emphasis on seismic activity surrounding the Colombian Pacific and Caribbean oceans, for early warning in case a Tsunami is produced by an earthquake. The Colombian territory is located at the South America northwestern corner, here three tectonic plates converge: Nazca, Caribbean and the South American. The dynamics of these plates, when resulting in earthquakes, is continuously monitored by the network. In 2012, the RSNC registered in 2012 an average of 67 events per day; from this number, a mean of 36 earthquakes were possible to be located well. In 2010 the network was also able to register an average of 67 events, but it was only possible to locate a mean of 28 earthquakes daily. This difference is due to the expansion of the network. The network is made up of 84 stations equipped with different kind of broadband 40s, 120s seismometers, accelerometers and short period 1s sensors. The signal is transmitted continuously in real-time to the Central Recording Center located at Bogotá, using satellite, telemetry, and Internet. Moreover, there are some other stations which are required to collect the information in situ. Data is recorded and processed digitally using two different systems, EARTHWORM and SEISAN, which are able to process and share the information between them. The RSNC has designed and implemented a web system to share the seismological data. This innovative system uses tools like Java Script, Oracle and programming languages like PHP to allow the users to access the seismicity registered by the network almost in real time as well as to download the waveform and technical details. The coverage

  6. Out of the shadow: Long term cost development of intelligent sensor networks

    NARCIS (Netherlands)

    Fledderus, E.R; Kester, L.J.H.M.; Kranenburg-Bruinsma, K. van

    2013-01-01

    The paper addresses intelligent sensor networks (ISNs) as a special version of networked wireless robotics. The success of these networks is partly explained by the technical advances, but as well by cutting down costs of these networks. Using a functional breakdown of intelligent ISNs, the trends

  7. Interconnected networks

    CERN Document Server

    2016-01-01

    This volume provides an introduction to and overview of the emerging field of interconnected networks which include multi layer or multiplex networks, as well as networks of networks. Such networks present structural and dynamical features quite different from those observed in isolated networks. The presence of links between different networks or layers of a network typically alters the way such interconnected networks behave – understanding the role of interconnecting links is therefore a crucial step towards a more accurate description of real-world systems. While examples of such dissimilar properties are becoming more abundant – for example regarding diffusion, robustness and competition – the root of such differences remains to be elucidated. Each chapter in this topical collection is self-contained and can be read on its own, thus making it also suitable as reference for experienced researchers wishing to focus on a particular topic.

  8. A Reference Architecture for Network-Centric Information Systems

    National Research Council Canada - National Science Library

    Renner, Scott; Schaefer, Ronald

    2003-01-01

    This paper presents the "C2 Enterprise Reference Architecture" (C2ERA), which is a new technical concept of operations for building information systems better suited to the Network-Centric Warfare (NCW) environment...

  9. Knapsack - TOPSIS Technique for Vertical Handover in Heterogeneous Wireless Network

    OpenAIRE

    Malathy, E. M.; Vijayalakshmi Muthuswamy

    2015-01-01

    In a heterogeneous wireless network, handover techniques are designed to facilitate anywhere/anytime service continuity for mobile users. Consistent best-possible access to a network with widely varying network characteristics requires seamless mobility management techniques. Hence, the vertical handover process imposes important technical challenges. Handover decisions are triggered for continuous connectivity of mobile terminals. However, bad network selection and overload conditions in the...

  10. International Technical Communication: Beyond Translation, Localization.

    Science.gov (United States)

    Klein, Fred

    1993-01-01

    Offers a personal view of international technical communication. Discusses computer-assisted translation, machine translation, machine interpreting, and the future of international technical communication. (SR)

  11. Polar source analysis : technical memorandum

    Science.gov (United States)

    2017-09-29

    The following technical memorandum describes the development, testing and analysis of various polar source data sets. The memorandum also includes recommendation for potential inclusion in future releases of AEDT. This memorandum is the final deliver...

  12. NASA Technical Reports Server (NTRS)

    Data.gov (United States)

    National Aeronautics and Space Administration — The NTRS is a valuable resource for researchers, students, educators, and the public to access NASA's current and historical technical literature and engineering...

  13. Engineering Technical Support Center (ETSC)

    Science.gov (United States)

    ETSC is EPA’s technical support and resource centers responsible for providing specialized scientific and engineering support to decision-makers in the Agency’s ten regional offices, states, communities, and local businesses.

  14. Hydrogen Storage Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    The mission of the Hydrogen Storage Technical Team is to accelerate research and innovation that will lead to commercially viable hydrogen-storage technologies that meet the U.S. DRIVE Partnership goals.

  15. New functions for technical supervision

    Energy Technology Data Exchange (ETDEWEB)

    Herkommer, E.; Kressel, E.; Wollenschlaeger, M.

    1988-07-01

    The discussion concerns the foundation of a new Institution namely an 'Environmental Technical Inspection Board', in order to implement faster the technical and scientific findings in conservation and to control more efficiently the adherence to safety regulations. The article presents a review of the legal regulations in conservation, describes their constitutional status, tasks and legal status of the experts in the technical control societies, tasks and legal position of an environmental technical inspection board as well as its financing. It is stated that the execution deficit in pollution control can be decreased by better participation of experts and permanent control of all potentially dangerous installations. In order to realize this concept, the extension of already available structures presents itself, especially the consultation of officially approved experts, without a new administrative machinery having to be created. (orig./HSCH).

  16. Fuel Cell Technical Team Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-06-01

    The Fuel Cell Technical Team promotes the development of a fuel cell power system for an automotive powertrain that meets the U.S. DRIVE Partnership (United States Driving Research and Innovation for Vehicle efficiency and Energy sustainability) goals.

  17. Technical infrastructure monitoring at CERN

    CERN Document Server

    Stowisek, Jan; Suwalska, Anna

    2006-01-01

    The Technical Infrastructure Monitoring system (TIM) is used to monitor and control CERN's technical services from the CERN Control Centre (CCC). The system's primary function is to provide CCC operators with reliable real-time information about the state of the laboratory's extensive and widely distributed technical infrastructure. TIM is also used to monitor all general services required for the operation of CERN's accelerator complex and the experiments. A flexible data acquisition mechanism allows TIM to interface with a wide range of technically diverse installations, using industry standard protocols wherever possible and custom designed solutions where needed. The complexity of the data processing logic, including persistence, logging, alarm handling, command execution and the evaluation of datadriven business rules is encapsulated in the system's business layer. Users benefit from a suite of advanced graphical applications adapted to operations (synoptic views, alarm consoles, data analysis tools etc....

  18. Technical Service Agreement (TSA) | FNLCR

    Science.gov (United States)

    Frederick National Laboratory for Cancer Research (FNLCR) scientists provide services and solutions to collaborators through the Technical Services Program, whose portfolio includes more than 200 collaborations with more than 80 partners. FNLCR’s u

  19. S-Chip Technical Assistance

    Data.gov (United States)

    U.S. Department of Health & Human Services — The page will provide access to reports and other published products designed to assist states with complicated S-Chip technical issues. The reports and products...

  20. Network management systems for active distribution networks. A feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, D.A.

    2004-07-01

    A technical feasibility study on network management systems for active distribution networks is reported. The study investigated the potential for modifying a Distribution Network Operator (DNO) Supervisory Control and Data Acquisition System (SCADA) to give some degree of active management. Government incentives have encouraged more and more embedded generation being connected to the UK distribution networks and further acceleration of the process should support the 2010 target for a reduction in emissions of carbon dioxide. The report lists the objectives of the study and summarises what has been achieved; it also discusses limitations, reliability and resilience of existing SCADA. Safety and operational communications are discussed under staff safety and operational safety. Recommendations that could facilitate active management through SCADA are listed, together with suggestions for further study. The work was carried out as part of the DTI New and Renewable Energy Programme managed by Future Energy Solutions.