WorldWideScience

Sample records for net mass flow

  1. An experimental investigation of flows from zero-net mass-flux actuators

    Science.gov (United States)

    Holman, Ryan Jay

    Zero-net mass-flux (ZNMF) devices consist of an oscillating driver, a cavity, and a small opening such as a rectangular slot or a circular orifice. The driver produces a series of vortex pairs (or rings) at the slot/orifice which add momentum and circulation to the flow. ZNMF devices are useful tools for flow control applications such as heat transfer, mixing enhancement, and boundary layer separation control. To date much research has been done to qualify and quantify the effects of ZNMF devices in many applications, both experimental and computational. However, a number of issues still remain. First, there is no universally accepted dimensionless parameter space, which makes device characterization and comparison between studies difficult. Second, most experimental studies do not sufficiently quantify the nearfield behavior, which hinders the fundamental understanding of the underlying flow physics. Of particular interest are the regimes of jet formation, and transition from laminar to turbulent-like flow, which are not well understood. Finally, the accuracy of experimental measurements are seldom reported in the literature. This study unifies the experimental and numerical data presented in the literature for ZNMF flowfields exhausting into a quiescent medium. A quantitative experimental database is also generated to completely characterize the topological regions of ZNMF flows over a useful range of the dimensionless parameter space. The database is derived chiefly from two-dimensional velocity field measurements using particle image velocimetry and laser Doppler anemometry. Vorticity, circulation, Reynolds stress, and turbulent kinetic energy is acquired to characterize the resulting flowfield. Significant insight into the behavior of voice coil driven ZNMF devices is uncovered. Design improvements are made by implementing a sinusoidal controller for piston motion and eliminating the need for a sealing membrane in the cavity. It is shown that the proper

  2. A net-jet flow system for mass transfer and microsensor studies of sinking aggregates

    DEFF Research Database (Denmark)

    Ploug, H.; Jørgensen, BB

    1999-01-01

    A flow system was developed which enables studies of hydrodynamics and mass transfer in freely sinking aggregates. The aggregates stabilized their positions in the water phase at an upward flow Velocity which balanced and opposed the sinking velocity of the individual aggregate. The flow field...

  3. Zero-Net Mass-Flux Actuator Cavity Vortex

    Science.gov (United States)

    Krieg, Michael; Mohseni, Kamran

    2013-11-01

    Zero-Net Mass-Flux (ZNMT) devices are used commonly as synthetic jet actuators for flow control in various applications. The authors have recently proposed using larger ZNMF jet actuators for underwater propulsion; similar to squid and jellyfish. Generally the external flow generated by these devices is characterized according to momentum and energy transfer rates, and little attention is paid to the dynamics of flow inside the cavity. In fact the flow inside the cavity, especially during the refilling phase is not only highly dynamic but greatly influences the pressure distribution at the opening as well as the external flow during the following jetting phase. A completely transparent axisymmetric ZNMF cavity was constructed in order to investigate the internal vortex dynamics. The flow is seeded with reflective particles and illumined with a laser sheet bisecting the axis of symmetry. Standard 2D DPIV techniques are used to recover the velocity field in this cross section. During filling it is observed that a starting jet extending from the opening to the inside of the cavity rolls into a vortex ring much like the jetting phase. However, the effect of the cavity walls becomes apparent almost immediately. In this talk we characterize how the circulation within the cavity decays as a function of both cavity/orifice geometry and the mass flux program. In addition a load cell measures the total thrust acting on the device which is used to validate pressure calculations performed on the moving surface inside the cavity, showing excellent agreement. This work is supported by a grant from the Office of Naval Research.

  4. Communication nets stochastic message flow and delay

    CERN Document Server

    Kleinrock, Leonard

    2007-01-01

    Considerable research has been devoted to the formulation and solution of problems involving flow within connected networks. Independent of these surveys, an extensive body of knowledge has accumulated on the subject of queues, particularly in regard to stochastic flow through single-node servicing facilities. This text combines studies of connected networks with those of stochastic flow, providing a basis for understanding the general behavior and operation of communication networks in realistic situations.Author Leonard Kleinrock of the Computer Science Department at UCLA created the basic p

  5. Software Tool Integrating Data Flow Diagrams and Petri Nets

    Science.gov (United States)

    Thronesbery, Carroll; Tavana, Madjid

    2010-01-01

    Data Flow Diagram - Petri Net (DFPN) is a software tool for analyzing other software to be developed. The full name of this program reflects its design, which combines the benefit of data-flow diagrams (which are typically favored by software analysts) with the power and precision of Petri-net models, without requiring specialized Petri-net training. (A Petri net is a particular type of directed graph, a description of which would exceed the scope of this article.) DFPN assists a software analyst in drawing and specifying a data-flow diagram, then translates the diagram into a Petri net, then enables graphical tracing of execution paths through the Petri net for verification, by the end user, of the properties of the software to be developed. In comparison with prior means of verifying the properties of software to be developed, DFPN makes verification by the end user more nearly certain, thereby making it easier to identify and correct misconceptions earlier in the development process, when correction is less expensive. After the verification by the end user, DFPN generates a printable system specification in the form of descriptions of processes and data.

  6. Translating Colored Control Flow Nets into Readable Java via Annotated Java Workflow Nets

    DEFF Research Database (Denmark)

    Lassen, Kristian Bisgaard; Tjell, Simon

    2007-01-01

    In this paper, we present a method for developing Java applications from Colored Control Flow Nets (CCFNs), which is a special kind of Colored Petri Nets (CPNs) that we introduce. CCFN makes an explicit distinction between the representation of: The system, the environment of the system, and the ......In this paper, we present a method for developing Java applications from Colored Control Flow Nets (CCFNs), which is a special kind of Colored Petri Nets (CPNs) that we introduce. CCFN makes an explicit distinction between the representation of: The system, the environment of the system......, and the interface between the system and the environment. Our translation maps CCFNs into Anno- tated Java Workflow Nets (AJWNs) as an intermediate step, and these AJWNs are finally mapped to Java. CCFN is intended to enforce the modeler to describe the system in an imperative manner which makes the subsequent...... translation to Java easier to define. The translation to Java preserves data dependencies and control-flow aspects of the source CCFN. This paper contributes to the model-driven software development paradigm, by showing how to model a system, environment, and their interface, as a CCFN and presenting a fully...

  7. Detekce provozu Skype pomocí dat NetFlow

    OpenAIRE

    Šebeň, Patrik

    2012-01-01

    NetFlow je sieťový protokol bežne používaný k zberu informácií o IP tokoch. Avšak existuje možnosť, ako použiť tieto zachytené dáta k identifikácií klientov v Skype komunikácií. Táto práca pojednáva o identifikácií určitých vzorov v Skype protokole a ich detekcií v NetFlow dátach. Týmto spôsobom sme schopný identifikovať nódy a supernódy v sieti Skype. NetFlow is a network protocol commonly used for collectiong IP traffic information. But there is a way to use this collected data for inden...

  8. Petri net modeling of encrypted information flow in federated cloud

    Science.gov (United States)

    Khushk, Abdul Rauf; Li, Xiaozhong

    2017-08-01

    Solutions proposed and developed for the cost-effective cloud systems suffer from a combination of secure private clouds and less secure public clouds. Need to locate applications within different clouds poses a security risk to the information flow of the entire system. This study addresses this by assigning security levels of a given lattice to the entities of a federated cloud system. A dynamic flow sensitive security model featuring Bell-LaPadula procedures is explored that tracks and authenticates the secure information flow in federated clouds. Additionally, a Petri net model is considered as a case study to represent the proposed system and further validate the performance of the said system.

  9. Measuring Cloud Service Health Using NetFlow/IPFIX

    DEFF Research Database (Denmark)

    Drago, Idilio; Hofstede, Rick; Sadre, Ramin

    2015-01-01

    The increasing trend of outsourcing services to cloud providers is changing the way computing power is delivered to enterprises and end users. Although cloud services offer several advantages, they also make cloud consumers strongly dependent on providers. Hence, consumers have a vital interest...... to be immediately informed about any problems in their services. This paper aims at a first step toward a network-based approach to monitor cloud services. We focus on severe problems that affect most services, such as outages or extreme server overload, and propose a method to monitor these problems that relies...... solely on the traffic exchanged between users and cloud providers. Our proposal is entirely based on NetFlow/IPFIX data and, therefore, explicitly targets high-speed networks. By combining a methodology to reassemble and classify flow records with stochastic estimations, our proposal has the distinct...

  10. Coriolis mass flow rate meters for low flows

    NARCIS (Netherlands)

    Mehendale, A.

    2008-01-01

    The accurate and quick measurement of small mass flow rates (~10 mg/s) of fluids is considered an “enabling technology��? in semiconductor, fine-chemical, and food & drugs industries. Flowmeters based on the Coriolis effect offer the most direct sensing of the mass flow rate, and for this reason do

  11. Mass distribution of free insecticide-treated nets do not interfere with continuous net distribution in Tanzania.

    Science.gov (United States)

    Eze, Ikenna C; Kramer, Karen; Msengwa, Amina; Mandike, Renata; Lengeler, Christian

    2014-05-27

    To protect the most vulnerable groups from malaria (pregnant women and infants) the Tanzanian Government introduced a subsidy (voucher) scheme in 2004, on the basis of a public-private partnership. These vouchers are provided to pregnant women at their first antenatal care visit and mothers of infants at first vaccination. The vouchers are redeemed at registered retailers for a long-lasting insecticidal net against the payment of a modest top-up price. The present work analysed a large body of data from the Tanzanian National Voucher Scheme, focusing on interactions with concurrent mass distribution campaigns of free nets. In an ecologic study involving all regions of Tanzania, voucher redemption data for the period 2007-2011, as well as data on potential determinants of voucher redemption were analysed. The four outcome variables were: pregnant woman and infant voucher redemption rates, use of treated bed nets by all household members and by under- five children. Each of the outcomes was regressed with selected determinants, using a generalized estimating equation model and accounting for regional data clustering. There was a consistent improvement in voucher redemption rates over the selected time period, with rates >80% in 2011. The major determinants of redemption rates were the top-up price paid by the voucher beneficiary, the retailer- clinic ratio, and socio-economic status. Improved redemption rates after 2009 were most likely due to reduced top-up prices (following a change in policy). Redemption rates were not affected by two major free net distribution campaigns. During this period, there was a consistent improvement in net use across all the regions, with rates of up to 75% in 2011. The key components of the National Treated Nets Programme (NATNETS) seem to work harmoniously, leading to a high level of net use in the entire population. This calls for the continuation of this effort in Tanzania and for emulation by other countries with endemic malaria.

  12. Mass and energy flow in prominences

    Science.gov (United States)

    Poland, Arthur I.

    1990-01-01

    Mass and energy flow in quiescent prominences is considered based on the hypothesis that active region prominences have a different structure and thus different mass and energy flow characteristics. Several important physical parameters have been plotted using the computational model, representing the evolutionary process after the prominence formation. The temperature, velocity, conductive flux, and enthalpy flux are plotted against distance from the highest point in the loop to the coolest part of the prominence. It is shown that the maximum velocity is only about 5 km/s. The model calculations indicate that the transition region of prominences is dominated by complex processes. It is necessary to take into account mass flow at temperatures below 200,000 K, and both mass flow and optical depth effects in hydrogen at temperatures below 30,000 K. Both of these effects lead to a less steep temperature gradient through the prominence corona interface than can be obtained from the conduction alone.

  13. Net infiltration of the Death Valley regional ground-water flow system, Nevada and California

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Recharge in the Death Valley regional ground-water flow system (DVRFS) was estimated from net infiltration simulated by Hevesi and others (2003) using a...

  14. Oxygen-Mass-Flow Calibration Cell

    Science.gov (United States)

    Martin, Robert E.

    1996-01-01

    Proposed calibration standard for mass flow rate of oxygen based on conduction of oxygen ions through solid electrolyte membrane made of zirconia and heated to temperature of 1,000 degrees C. Flow of oxygen ions proportional to applied electric current. Unaffected by variations in temperature and pressure, and requires no measurement of volume. Calibration cell based on concept used to calibrate variety of medical and scientific instruments required to operate with precise rates of flow of oxygen.

  15. SSH Compromise Detection using NetFlow/IPFIX

    NARCIS (Netherlands)

    Hofstede, R.J.; Hendriks, Luuk; Sperotto, Anna; Pras, Aiko

    2014-01-01

    Flow-based approaches for SSH intrusion detection have been developed to overcome the scalability issues of host-based alternatives. Although the detection of many SSH attacks in a flow-based fashion is fairly straightforward, no insight is typically provided in whether an attack was successful. We

  16. Estimates of Regional Equilibrium Line Altitudes and Net Mass Balance from MODIS Imagery

    Science.gov (United States)

    Shea, J. M.; Menounos, B.; Moore, R. D.

    2011-12-01

    Glacier mass balance is a key variable used to assess the health of glaciers and ice sheets. Estimates of glacier mass balance are required to model the dynamic response of glaciers and ice sheets to climate change, estimate sea-level contribution from surface melt, and document the response of glaciers to climate forcing. Annually resolved estimates of regional mass balance for mountain ranges is often inferred from a sparse network of ground-based measurements of mass balance for individual glaciers. Given that net mass balance is highly correlated with the annual equilibrium line altitude (ELA), we develop an automated approach to estimate the ELA, and by inference net mass balance, on large glaciers and icefields using MODIS 250 m imagery (MOD02QKM). We discriminate areas of bare ice and snow/firn using the product of MODIS' red (0.620 - 0.670 μ m) and near infrared (0.841 - 0.876 μ m) bands. To assess the skill in estimating glacier ELAs, we compare ELAs derived from (1) manual delineation and (2) unsupervised classification of the band product to ground-based observations of ELA and net mass balance at seven long term mass-balance monitoring sites in western North America (Gulkana, Wolverine, Lemon Creek, Taku, Place, Peyto, and South Cascade). Spatial and temporal variations in MODIS-derived ELAs provide an opportunity to validate regional mass-balance models, estimate surface melt contributions to sea-level rise, and examine the cryospheric response to climate change.

  17. Mass flow meter of the Coriolis type

    NARCIS (Netherlands)

    Mehendale, A.; Lötters, Joost Conrad; Lotters, Joost Conrad; Zwikker, Jan Marinus

    2006-01-01

    A mass flowmeter of the Coriolis type with a tube that forms a mechanically closed loop through which a medium flows during operation, and with excitation means for causing the loop to rotate in an oscillatory mode about an axis of rotation during operation. The loop has a starting point and an end

  18. Net Income, Book Value and Cash Flows: The Value Relevance in Jordanian Economic Sectors

    Directory of Open Access Journals (Sweden)

    DHIAA SHAMKI

    2013-07-01

    Full Text Available This paper examines the value relevance of financial statements variables namely net income, book value and cash flows simultaneously relative to Jordanian services and industrial firms for the period from 2000 to 2009. The main findings of this paper are three- dimensional. First, net income is value relevant, while book value and cash flows are irrelevant. Second, net income is more value relevant than book value and cash flows in both sectors. Third, this value relevance is greater in services sector than in industrial sector. The study shows that net income assist more in explaining market values in Jordanian services and industrial firms. Since research on the value relevance of these variables has neglected Jordan (and the Middle Eastern region, the study tries to fill this practical gap. The study is the first in Jordan that examines the value relevance of net income, book value and cash flows simultaneously and compares this value relevance according to Amman Stock Exchange sectors in one study in Jordan.

  19. Net profit flow per country from 1980 to 2009 : The long-term effects of foreign direct investment

    NARCIS (Netherlands)

    Akkermans, Dirk H.M.

    2017-01-01

    Aim of the paper The paper aims at describing and explaining net profit flows per country for the period 1980-2009. Net profit flows result from Foreign Direct Investment (FDI) stock and profit repatriation: inward stock creating a profit outflow and outward FDI stock a profit inflow. Profit flows,

  20. Turbulent motion of mass flows. Mathematical modeling

    Science.gov (United States)

    Eglit, Margarita; Yakubenko, Alexander; Yakubenko, Tatiana

    2016-04-01

    New mathematical models for unsteady turbulent mass flows, e.g., dense snow avalanches and landslides, are presented. Such models are important since most of large scale flows are turbulent. In addition to turbulence, the two other important points are taken into account: the entrainment of the underlying material by the flow and the nonlinear rheology of moving material. The majority of existing models are based on the depth-averaged equations and the turbulent character of the flow is accounted by inclusion of drag proportional to the velocity squared. In this paper full (not depth-averaged) equations are used. It is assumed that basal entrainment takes place if the bed friction equals the shear strength of the underlying layer (Issler D, M. Pastor Peréz. 2011). The turbulent characteristics of the flow are calculated using a three-parameter differential model (Lushchik et al., 1978). The rheological properties of moving material are modeled by one of the three types of equations: 1) Newtonian fluid with high viscosity, 2) power-law fluid and 3) Bingham fluid. Unsteady turbulent flows down long homogeneous slope are considered. The flow dynamical parameters and entrainment rate behavior in time as well as their dependence on properties of moving and underlying materials are studied numerically. REFERENCES M.E. Eglit and A.E. Yakubenko, 2014. Numerical modeling of slope flows entraining bottom material. Cold Reg. Sci. Technol., 108, 139-148 Margarita E. Eglit and Alexander E. Yakubenko, 2016. The effect of bed material entrainment and non-Newtonian rheology on dynamics of turbulent slope flows. Fluid Dynamics, 51(3) Issler D, M. Pastor Peréz. 2011. Interplay of entrainment and rheology in snow avalanches; a numerical study. Annals of Glaciology, 52(58), 143-147 Lushchik, V.G., Paveliev, A.A. , and Yakubenko, A.E., 1978. Three-parameter model of shear turbulence. Fluid Dynamics, 13, (3), 350-362

  1. Gaseous Nitrogen Orifice Mass Flow Calculator

    Science.gov (United States)

    Ritrivi, Charles

    2013-01-01

    The Gaseous Nitrogen (GN2) Orifice Mass Flow Calculator was used to determine Space Shuttle Orbiter Water Spray Boiler (WSB) GN2 high-pressure tank source depletion rates for various leak scenarios, and the ability of the GN2 consumables to support cooling of Auxiliary Power Unit (APU) lubrication during entry. The data was used to support flight rationale concerning loss of an orbiter APU/hydraulic system and mission work-arounds. The GN2 mass flow-rate calculator standardizes a method for rapid assessment of GN2 mass flow through various orifice sizes for various discharge coefficients, delta pressures, and temperatures. The calculator utilizes a 0.9-lb (0.4 kg) GN2 source regulated to 40 psia (.276 kPa). These parameters correspond to the Space Shuttle WSB GN2 Source and Water Tank Bellows, but can be changed in the spreadsheet to accommodate any system parameters. The calculator can be used to analyze a leak source, leak rate, gas consumables depletion time, and puncture diameter that simulates the measured GN2 system pressure drop.

  2. Small Scale Mass Flow Plug Calibration

    Science.gov (United States)

    Sasson, Jonathan

    2015-01-01

    A simple control volume model has been developed to calculate the discharge coefficient through a mass flow plug (MFP) and validated with a calibration experiment. The maximum error of the model in the operating region of the MFP is 0.54%. The model uses the MFP geometry and operating pressure and temperature to couple continuity, momentum, energy, an equation of state, and wall shear. Effects of boundary layer growth and the reduction in cross-sectional flow area are calculated using an in- integral method. A CFD calibration is shown to be of lower accuracy with a maximum error of 1.35%, and slower by a factor of 100. Effects of total pressure distortion are taken into account in the experiment. Distortion creates a loss in flow rate and can be characterized by two different distortion descriptors.

  3. Mass and energy flow near sunspots

    Science.gov (United States)

    Nye, Alan; Bruning, David; Labonte, Barry J.

    1988-01-01

    Sunspots block the flow of energy to the solar surface. The blocked energy heats the volume beneath the spot, producing a pressure excess which drives an outflow of mass. Linear numerical models of the mass and energy flow around spots were constructed to estimate the predictions of this physical picture against the observed properties of sunspot bright rings and moat flows. The width of the bright ring and moat are predicted to be proportional to the depth of the spot penumbra, in conflict with the observed proportionality of the moat width to the spot diameter. Postulating that spot depths are proportional to spot diameters would bury the moat flow too deeply to be observed, because the radial velocity at the surface is found to be inversely proportional to the depth of the spot penumbra. The radial velocity at the surface is of order a few hundred meters per second after 1 day, in agreement with the observed excess of moat velocities over supergranule velocities.

  4. Report of the Third Workshop on the Usage of NetFlow/IPFIX in Network Management

    NARCIS (Netherlands)

    Drago, Idilio; Sadre, R.; Pras, Aiko

    2011-01-01

    The Network Management Research Group (NMRG) organized in 2010 the Third Workshop on the Usage of NetFlow/IPFIX in Network Management, as part of the 78th IETF Meeting in Maastricht. Yearly organized since 2007, the workshop is an opportunity for people from both academia and industry to discuss the

  5. System effectiveness of a targeted free mass distribution of long lasting insecticidal nets in Zanzibar, Tanzania

    Directory of Open Access Journals (Sweden)

    Abass Ali K

    2010-06-01

    Full Text Available Abstract Background Insecticide-treated nets (ITN and long-lasting insecticidal treated nets (LLIN are important means of malaria prevention. Although there is consensus regarding their importance, there is uncertainty as to which delivery strategies are optimal for dispensing these life saving interventions. A targeted mass distribution of free LLINs to children under five and pregnant women was implemented in Zanzibar between August 2005 and January 2006. The outcomes of this distribution among children under five were evaluated, four to nine months after implementation. Methods Two cross-sectional surveys were conducted in May 2006 in two districts of Zanzibar: Micheweni (MI on Pemba Island and North A (NA on Unguja Island. Household interviews were conducted with 509 caretakers of under-five children, who were surveyed for socio-economic status, the net distribution process, perceptions and use of bed nets. Each step in the distribution process was assessed in all children one to five years of age for unconditional and conditional proportion of success. System effectiveness (the accumulated proportion of success and equity effectiveness were calculated, and predictors for LLIN use were identified. Results The overall proportion of children under five sleeping under any type of treated net was 83.7% (318/380 in MI and 91.8% (357/389 in NA. The LLIN usage was 56.8% (216/380 in MI and 86.9% (338/389 in NA. Overall system effectiveness was 49% in MI and 87% in NA, and equity was found in the distribution scale-up in NA. In both districts, the predicting factor of a child sleeping under an LLIN was caretakers thinking that LLINs are better than conventional nets (OR = 2.8, p = 0.005 in MI and 2.5, p = 0.041 in NA, in addition to receiving an LLIN (OR = 4.9, p Conclusions Targeted free mass distribution of LLINs can result in high and equitable bed net coverage among children under five. However, in order to sustain high effective coverage, there

  6. System effectiveness of a targeted free mass distribution of long lasting insecticidal nets in Zanzibar, Tanzania.

    Science.gov (United States)

    Beer, Netta; Ali, Abdullah S; de Savigny, Don; Al-Mafazy, Abdul-Wahiyd H; Ramsan, Mahdi; Abass, Ali K; Omari, Rahila S; Björkman, Anders; Källander, Karin

    2010-06-18

    Insecticide-treated nets (ITN) and long-lasting insecticidal treated nets (LLIN) are important means of malaria prevention. Although there is consensus regarding their importance, there is uncertainty as to which delivery strategies are optimal for dispensing these life saving interventions. A targeted mass distribution of free LLINs to children under five and pregnant women was implemented in Zanzibar between August 2005 and January 2006. The outcomes of this distribution among children under five were evaluated, four to nine months after implementation. Two cross-sectional surveys were conducted in May 2006 in two districts of Zanzibar: Micheweni (MI) on Pemba Island and North A (NA) on Unguja Island. Household interviews were conducted with 509 caretakers of under-five children, who were surveyed for socio-economic status, the net distribution process, perceptions and use of bed nets. Each step in the distribution process was assessed in all children one to five years of age for unconditional and conditional proportion of success. System effectiveness (the accumulated proportion of success) and equity effectiveness were calculated, and predictors for LLIN use were identified. The overall proportion of children under five sleeping under any type of treated net was 83.7% (318/380) in MI and 91.8% (357/389) in NA. The LLIN usage was 56.8% (216/380) in MI and 86.9% (338/389) in NA. Overall system effectiveness was 49% in MI and 87% in NA, and equity was found in the distribution scale-up in NA. In both districts, the predicting factor of a child sleeping under an LLIN was caretakers thinking that LLINs are better than conventional nets (OR = 2.8, p = 0.005 in MI and 2.5, p = 0.041 in NA), in addition to receiving an LLIN (OR = 4.9, p < 0.001 in MI and in OR = 30.1, p = 0.001 in NA). Targeted free mass distribution of LLINs can result in high and equitable bed net coverage among children under five. However, in order to sustain high effective coverage, there is need

  7. The new automotive 42V PowerNet. Preparing for mass production

    Energy Technology Data Exchange (ETDEWEB)

    Graf, A. (ed.)

    2001-07-01

    A number of international auto makers have set themselves the target of getting an automobile with a dual 12V/42V PowerNet into mass production by the year 2005. Reports on practical experience of current projects at leading international auto makers and suppliers allow the reader to get a picture of the status of introduction of the 42V PowerNet and of the problems associated with translating development work into mass production, providing them with an idea of the opportunities for structuring their own company or organizing company activities. The book gives an overview of the problems of introducing the 42V PowerNet into automotive engineering. The basic question here is not 'Why 42V?' but rather 'How can a 42V system be introduced into mass production alongside an existing 12V system?''. It provides information from the standpoint of the engineer and the businessman on: The problems of introduction as seen by the auto maker - Proposed solutions to detailed problems such as short circuits and sparking-System reviews, such as Intelligent Power Management - Suggestions for individual components, such as individual semiconductors - Suggested solutions involving new materials - Solution variants and verification by simulation. (orig.)

  8. Using UML and Petri nets for visualization of business document flow

    Directory of Open Access Journals (Sweden)

    Ivana Rábová

    2012-01-01

    Full Text Available The article deals with two principles of business workflow modeling, Petri nets and UML notation, that are the acceptable approaches to business modeling and can be used also for business documents workflow. The special type of Petri nets, WF-nets and UML activity diagrams are used in this article and both modeling ways are presented on the concrete business workflow and then there are presented and specified their advantage and disadvantage for business documents flows. At beginning it is explained the word workflow in context business documents, its features, principles and using in business environment. After that it is clarified that the UML is OMG’s most-used specification, and the way the world models not only application structure, behavior, and architecture, but also business process, workflows and data structure. Activity diagram UML is good way to show how different workflows in the business are managed, how they start, go and stop. Diagrams also show many different decision paths that can be taken from start to finish. State charts can be used as a detail the transitions or changes of states when documents can go through in the business. They show how a documents moves from one state to another and the rules that govern that change. Petri-nets offer a graphical notation for stepwise processes that include choice, iteration, and concurrent execution. Unlike UML Petri nets have an exact mathematical definition of their execution semantics, with a well-developed mathematical theory for process analysis. In the article there are modeled a special type of Petri nets, the WF-nets. The practical part of article incorporates two models of concrete business documents workflows presented in these notations, their comparison and recommendation for using these diagrams in business process management.

  9. Net capital flows to and the real exchange rate of Western Balkan countries

    Directory of Open Access Journals (Sweden)

    Gabrisch Hubert

    2015-01-01

    Full Text Available This paper uses Granger causality tests to assess the linkages between changes in the real exchange rate and net capital inflows using the example of Western Balkan countries, which have suffered from low competitiveness and external imbalances for many years. The real exchange rate is a measure of a country’s price competitiveness, and the paper uses two concepts: relative unit labour cost and relative inflation differential. The sample consists of six Western Balkan countries for the period 1996-2012, relative to the European Union (EU. The main finding is that changes in the net capital flows precede changes in relative unit labour costs and not vice versa. Also, there is evidence that net capital flows affect the inflation differential of countries, although to a less discernible extent. This suggests that the increasing divergence in the unit labour cost between the EU and Western Balkan countries up to the global financial crisis was at least partly the result of net capital inflows. The paper adds to the ongoing debate on improving cost competitiveness through wage restrictions as the main vehicle to avert the accumulation of current account imbalances. It shows the importance of changes in the exchange rate regime, reform of the interaction between the financial and the real sector, and financial supervision and structural change.

  10. Flow monitoring explained: from packet capture to data analysis with NetFlow and IPFIX

    NARCIS (Netherlands)

    Hofstede, R.J.; Celeda, Pavel; Trammell, Brian; Drago, Idilio; Sadre, R.; Sperotto, Anna; Pras, Aiko

    2014-01-01

    Flow monitoring has become a prevalent method for monitoring traffic in high-speed networks. By focusing on the analysis of flows, rather than individual packets, it is often said to be more scalable than traditional packet-based traffic analysis. Flow monitoring embraces the complete chain of

  11. Constant-net-time headway as a key mechanism behind pedestrian flow dynamics.

    Science.gov (United States)

    Johansson, Anders

    2009-08-01

    We show that keeping a constant lower limit on the net-time headway is the key mechanism behind the dynamics of pedestrian streams. There is a large variety in flow and speed as functions of density for empirical data of pedestrian streams obtained from studies in different countries. The net-time headway, however, stays approximately constant over all these different data sets. By using this fact, we demonstrate how the underlying dynamics of pedestrian crowds, naturally follows from local interactions. This means that there is no need to come up with an arbitrary fit function (with arbitrary fit parameters) as has traditionally been done. Further, by using not only the average density values but the variance as well, we show how the recently reported stop-and-go waves [Helbing, Phys. Rev. E 75, 046109 (2007)] emerge when local density variations take values exceeding a certain maximum global (average) density, which makes pedestrians stop.

  12. Development of a numerical model for fluid-structure interaction analysis of flow through and around an aquaculture net cage

    DEFF Research Database (Denmark)

    Chen, Hao; Christensen, Erik Damgaard

    2017-01-01

    In the present work, we developed a numerical model for fluid-structure interaction analysis of flow through and around an aquaculture net cage. The numerical model is based on the coupling between the porous media model and the lumped mass structural model. A novel interface was implemented...... was approximated by a set of dynamic porous zones, where the grid cells were updated at every iteration based on the transferred nodal positions from the structural model. A time stepping procedure was introduced, so the solver is applicable in both steady and unsteady conditions. In order to reduce...... the computational effort, sub-cycling was applied for the structural solver within each time step, based on the quasi-steady state assumption. The numerical model was validated against experiments in both steady and unsteady conditions. In general, the agreement is satisfactory....

  13. The Perspective on Data and Control Flow Analysis in Topological Functioning Models by Petri Nets

    Directory of Open Access Journals (Sweden)

    Asnina Erika

    2014-12-01

    Full Text Available The perspective on integration of two mathematical formalisms, i.e., Colored Petri Nets (CPNs and Topological Functioning Model (TFM, is discussed in the paper. The roots of CPNs are in modeling system functionality. The TFM joins principles of system theory and algebraic topology, and formally bridges the solution domain with the problem domain. It is a base for further automated construction of software design models. The paper discusses a perspective on check of control and data flows in the TFM by CPNs formalism. The research result is definition of mappings from TFMs to CPNs.

  14. Smolt Responses to Hydrodynamic Conditions in Forebay Flow Nets of Surface Flow Outlets, 2007

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, Gary E.; Richmond, Marshall C.; Hedgepeth, J. B.; Ploskey, Gene R.; Anderson, Michael G.; Deng, Zhiqun; Khan, Fenton; Mueller, Robert P.; Rakowski, Cynthia L.; Sather, Nichole K.; Serkowski, John A.; Steinbeck, John R.

    2009-04-01

    This study provides information on juvenile salmonid behaviors at McNary and The Dalles dams that can be used by the USACE, fisheries resource managers, and others to support decisions on long-term measures to enhance fish passage. We researched smolt movements and ambient hydrodynamic conditions using a new approach combining simultaneous acoustic Doppler current profiler (ADCP) and acoustic imaging device (AID) measurements at surface flow outlets (SFO) at McNary and The Dalles dams on the Columbia River during spring and summer 2007. Because swimming effort vectors could be computed from the simultaneous fish and flow data, fish behavior could be categorized as passive, swimming against the flow (positively rheotactic), and swimming with the flow (negatively rheotactic). We present bivariate relationships to provide insight into fish responses to particular hydraulic variables that engineers might consider during SFO design. The data indicate potential for this empirical approach of simultaneous water/fish measurements to lead to SFO design guidelines in the future.

  15. Petri Nets Based Modelling of Control Flow for Memory-Aid Interactive Programs in Telemedicine

    CERN Document Server

    Khoromskaia, V K

    2004-01-01

    Petri Nets (PN) based modelling of the control flow for the interactive memory assistance programs designed for personal pocket computers and having special requirements for robustness is considered. The proposed concept allows one to elaborate the programs which can give users a variety of possibilities for a day-time planning in the presence of environmental and time restrictions. First, a PN model for a known simple algorithm is constructed and analyzed using the corresponding state equations and incidence matrix. Then a PN graph for a complicated algorithm with overlapping actions and choice possibilities is designed, supplemented by an example of its analysis. Dynamic behaviour of this graph is tested by tracing of all possible paths of the flow of control using the PN simulator. It is shown that PN based modelling provides reliably predictable performance of interactive algorithms with branched structures and concurrency requirements.

  16. Observations on the decay of a thermocline in a rock bed with no net fluid flow

    Energy Technology Data Exchange (ETDEWEB)

    Beasley, D.E.; Clark, J.A.; Holstege, M.J.

    1985-02-01

    The transient thermal response of a rock bed with no net fluid flow is examined following all-day charging under clear sky conditions. The experimental system consists of 1.86 m/sup 2/ (20 ft/sup 2/) of flat-plate solar collectors using air as the working fluid, a flow control system, and a 0.357 m/sup 3/ (12.6 ft/sup 3/) rock bed for thermal energy storage. A thermocline is established in the bed during charging due to the timevarying nature of the collector outlet temperature. Experimental measurements of the temperature distribution in the bed for a 13-hour stagnation period allow a preliminary estimate of the loss of available energy in the storage medium. The net loss in thermodynamic availability is 30 percent. Since the temperatures in the upper regions of the bed are lower than those in the central regions at the end of charging under clear sky conditions, the possibility of natural convection motion of the fluid in the bed exists. An ''apparent'' local thermal diffusivity is calculated and from comparison with stagnant bed values indicates that natural convection motion may occur in the upper regions of the bed.

  17. Micro Coriolis mass flow sensor driven by external piezo ceramic

    NARCIS (Netherlands)

    Zeng, Yaxiang; Groenesteijn, Jarno; Alveringh, Dennis; Wiegerink, Remco J.; Lötters, Joost Conrad

    2017-01-01

    We have realized a micro Coriolis mass flow meter driven with an external piezo ceramic. The piezoelec tric ceramic is glued on top of sensor chip with a inertial weight on top of the piezo ceramic. Its ability to measure mass flow is characterized by a laser Doppler vibrometer. Our measurement with

  18. Vibration isolation for Coriolis Mass-Flow meters

    NARCIS (Netherlands)

    van de Ridder, Bert

    2015-01-01

    A Coriolis Mass-Flow Meter (CMFM) is an active device based on the Coriolis force principle for direct mass-flow measurements, with high accuracy, range-ability and repeatability. The working principle of a CMFM is as follows: a fluid conveying tube is actuated to oscillate at a low amplitude. A

  19. Micro Coriolis mass flow sensor for chemical micropropulsion systems

    NARCIS (Netherlands)

    Wiegerink, Remco J.; Lammerink, Theodorus S.J.; Groenesteijn, Jarno; Dijkstra, Pieter J.; Lötters, Joost Conrad

    2012-01-01

    We have designed a micromachined micro Coriolis flow sensor for the measurement of hydrazine (N2H4, High Purity Grade) propellant flow in micro chemical propulsion systems. The sensor measures mass flow up to 10 mg/s for a single thruster or up to 40 mg/s for four thrusters. The sensor will first be

  20. Net profit flow per country from 1980 to 2009: The long-term effects of foreign direct investment

    Science.gov (United States)

    2017-01-01

    Aim of the paper The paper aims at describing and explaining net profit flows per country for the period 1980–2009. Net profit flows result from Foreign Direct Investment (FDI) stock and profit repatriation: inward stock creating a profit outflow and outward FDI stock a profit inflow. Profit flows, especially ‘normal’ ones are not commonly researched. Theoretical background According to world-system theory, countries are part of a system characterised by a core, semi-periphery and periphery, as shown by network analyses of trade relations. Network analyses based on ownership relations of TransNational Corporations (TNCs) show that the top 50 firms that control about 40% of the world economy are almost exclusively located in core countries. So, we may expect a hierarchy in net profit flows with core countries on top and the periphery at the bottom. FDI outflows from the core countries especially rose in the 1990s, so we may expect that the difference has grown in time. Data and results A dataset on 'net profit flow' per country is developed. There are diverging developments in net profit flows since the 1980s, as expected: ever more positive for core countries, negative and ever lower for semi-peripheral and peripheral countries, in particular from the 1990s onwards. A fixed effects quantile regression using publicly available data confirms the prediction that peripheral countries share a unique characteristic: their outward investments do not have a positive influence on net profit flow as is the case with semi-peripheral and core countries. The most probable explanation is that peripheral outward investments are indirectly owned by firms located in core and semi-peripheral countries, so all peripheral profit inflows end up in those countries. PMID:28654644

  1. Net profit flow per country from 1980 to 2009: The long-term effects of foreign direct investment.

    Science.gov (United States)

    Akkermans, Dirk H M

    2017-01-01

    The paper aims at describing and explaining net profit flows per country for the period 1980-2009. Net profit flows result from Foreign Direct Investment (FDI) stock and profit repatriation: inward stock creating a profit outflow and outward FDI stock a profit inflow. Profit flows, especially 'normal' ones are not commonly researched. According to world-system theory, countries are part of a system characterised by a core, semi-periphery and periphery, as shown by network analyses of trade relations. Network analyses based on ownership relations of TransNational Corporations (TNCs) show that the top 50 firms that control about 40% of the world economy are almost exclusively located in core countries. So, we may expect a hierarchy in net profit flows with core countries on top and the periphery at the bottom. FDI outflows from the core countries especially rose in the 1990s, so we may expect that the difference has grown in time. A dataset on 'net profit flow' per country is developed. There are diverging developments in net profit flows since the 1980s, as expected: ever more positive for core countries, negative and ever lower for semi-peripheral and peripheral countries, in particular from the 1990s onwards. A fixed effects quantile regression using publicly available data confirms the prediction that peripheral countries share a unique characteristic: their outward investments do not have a positive influence on net profit flow as is the case with semi-peripheral and core countries. The most probable explanation is that peripheral outward investments are indirectly owned by firms located in core and semi-peripheral countries, so all peripheral profit inflows end up in those countries.

  2. Building waste management core indicators through Spatial Material Flow Analysis: net recovery and transport intensity indexes.

    Science.gov (United States)

    Font Vivanco, David; Puig Ventosa, Ignasi; Gabarrell Durany, Xavier

    2012-12-01

    In this paper, the material and spatial characterization of the flows within a municipal solid waste (MSW) management system are combined through a Network-Based Spatial Material Flow Analysis. Using this information, two core indicators are developed for the bio-waste fraction, the Net Recovery Index (NRI) and the Transport Intensity Index (TII), which are aimed at assessing progress towards policy-related sustainable MSW management strategies and objectives. The NRI approaches the capacity of a MSW management system for converting waste into resources through a systematic metabolic approach, whereas the TII addresses efficiency in terms of the transport requirements to manage a specific waste flow throughout the entire MSW management life cycle. Therefore, both indicators could be useful in assessing key MSW management policy strategies, such as the consecution of higher recycling levels (sustainability principle) or the minimization of transport by locating treatment facilities closer to generation sources (proximity principle). To apply this methodological approach, the bio-waste management system of the region of Catalonia (Spain) has been chosen as a case study. Results show the adequacy of both indicators for identifying those points within the system with higher capacity to compromise its environmental, economic and social performance and therefore establishing clear targets for policy prioritization. Moreover, this methodological approach permits scenario building, which could be useful in assessing the outcomes of hypothetical scenarios, thus proving its adequacy for strategic planning. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. A mechanical erosion model for two-phase mass flows

    CERN Document Server

    Pudasaini, Shiva P

    2016-01-01

    Erosion, entrainment and deposition are complex and dominant, but yet poorly understood, mechanical processes in geophysical mass flows. Here, we propose a novel, process-based, two-phase, erosion-deposition model capable of adequately describing these complex phenomena commonly observed in landslides, avalanches, debris flows and bedload transport. The model is based on the jump in the momentum flux including changes of material and flow properties along the flow-bed interface and enhances an existing general two-phase mass flow model (Pudasaini, 2012). A two-phase variably saturated erodible basal morphology is introduced and allows for the evolution of erosion-deposition-depths, incorporating the inherent physical process including momentum and rheological changes of the flowing mixture. By rigorous derivation, we show that appropriate incorporation of the mass and momentum productions or losses in conservative model formulation is essential for the physically correct and mathematically consistent descript...

  4. Mass and energy flow in the solar chromosphere and corona

    Science.gov (United States)

    Withbroe, G. L.; Noyes, R. W.

    1977-01-01

    The work reviews some investigations into the mass and energy flow in the solar chromosphere and corona; the objective of these investigations is the development of a physical model that will not only account for the physical conditions in the outer atmosphere of the sun, but can also be applied to the study of the outer atmospheres of other stars. Particular attention is given to mass and energy flow in regions with weak and strong magnetic fields, to observational evidence for wave heating and systematic mass flows, and to heating mechanisms. Consideration is given throughout to mechanisms of energy input and energy loss.

  5. Gas mass transfer for stratified flows

    Energy Technology Data Exchange (ETDEWEB)

    Duffey, R.B. [Brookhaven National Lab., Upton, NY (United States); Hughes, E.D. [CSA, Inc., Idaho Falls, ID (United States)

    1995-06-01

    We analyzed gas absorption and release in water bodies using existing surface renewal theory. We show a new relation between turbulent momentum and mass transfer from gas to water, including the effects of waves and wave roughness, by evaluating the equilibrium integral turbulent dissipation due to energy transfer to the water from the wind. Using Kolmogoroff turbulence arguments the gas transfer velocity, or mass transfer coefficient, is then naturally and straightforwardly obtained as a non-linear function of the wind speed drag coefficient and the square root of the molecular diffusion coefficient. In dimensionless form, the theory predicts the turbulent Sherwood number to be Sh{sub t} = (2/{radical}{pi})Sc{sup 1/2}, where Sh{sub t} is based on an integral dissipation length scale in the air. The theory confirms the observed nonlinear variation of the mass transfer coefficient as a function of the wind speed; gives the correct transition with turbulence-centered models for smooth surfaces at low speeds; and predicts experimental data from both laboratory and environmental measurements within the data scatter. The differences between the available laboratory and field data measurements are due to the large differences in the drag coefficient between wind tunnels and oceans. The results also imply that the effect of direct aeration due to bubble entrainment at wave breaking is no more than a 20% increase in the mass transfer for the highest speeds. The theory has importance to mass transfer in both the geo-physical and chemical engineering literature.

  6. Gas mass transfer for stratified flows

    Energy Technology Data Exchange (ETDEWEB)

    Duffey, R.B. [Brookhaven National Lab., Upton, NY (United States); Hughes, E.D. [CSA Inc., Idaho Falls, ID (United States)

    1995-07-01

    We analyzed gas absorption and release in water bodies using existing surface renewal theory. We show a new relation between turbulent momentum and mass transfer from gas to water, including the effects of waves and wave roughness, by evaluating the equilibrum integral turbulent dissipation due to energy transfer to the water from the wind. Using Kolmogoroff turbulence arguments the gas transfer velocity, or mass transfer coefficient, is then naturally and straightforwardly obtained as a non-linear function of the wind speed drag coefficient and the square root of the molecular diffusion coefficient. In dimensionless form, the theory predicts the turbulent Sherwood number to be Sh{sub t} = (2/{radical}{pi}) Sc{sup 1/2}, where Sh{sub t} is based on an integral dissipation length scale in the air. The theory confirms the observed nonlinear variation of the mass transfer coefficient as a function of the wind speed; gives the correct transition with turbulence-centered models for smooth surfaces at low speeds; and predicts experimental data from both laboratory and environmental measurements within the data scatter. The differences between the available laboratory and field data measurements are due to the large differences in the drag coefficient between wind tunnels and oceans. The results also imply that the effect of direct aeration due to bubble entrainment at wave breaking is no more than a 20% increase in the mass transfer for the highest speeds. The theory has importance to mass transfer in both the geophysical and chemical engineering literature.

  7. Single-chip mass flow controller with integrated Coriolis flow sensor and proportional control valve

    NARCIS (Netherlands)

    Groenesteijn, Jarno; Alveringh, Dennis; Groen, Maarten; Wiegerink, Remco J.; Lötters, Joost Conrad

    2016-01-01

    We have designed, fabricated and tested the, to our knowledge, first ever single-chip mass flow controller with an integrated Coriolis mass flow sensor and a proportional control valve. A minimum internal volume is obtained, because the complete fluid path is integrated in a single chip. We

  8. Parametric amplification in a micro Coriolis mass flow sensor

    NARCIS (Netherlands)

    Groenesteijn, Jarno; Droogendijk, H.; Wiegerink, Remco J.; Lammerink, Theodorus S.J.; Lötters, Joost Conrad; Sanders, Remco G.P.; Krijnen, Gijsbertus J.M.

    2014-01-01

    We report on the application of parametric amplification to a micro Coriolis mass flow sensor. We demonstrate that this mechanism allows for reduction of the system's power dissipation while retaining sensitivity to flow. By reducing this power dissipation, less heat will be transferred to the fluid

  9. Building waste management core indicators through Spatial Material Flow Analysis: Net recovery and transport intensity indexes

    Energy Technology Data Exchange (ETDEWEB)

    Font Vivanco, David, E-mail: font@cml.leidenuniv.nl [Institut de Ciencia i Tecnologia Ambientals (ICTA), Departament d' Enginyeria Quimica, Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain); Institute of Environmental Sciences (CML), Leiden University, P.O. Box 9518, 2300 RA Leiden (Netherlands); Puig Ventosa, Ignasi [ENT Environment and Management, Carrer Sant Joan 39, First Floor, 08800 Vilanova i la Geltru, Barcelona (Spain); Gabarrell Durany, Xavier [Institut de Ciencia i Tecnologia Ambientals (ICTA), Departament d' Enginyeria Quimica, Universitat Autonoma de Barcelona (UAB), 08193 Bellaterra, Barcelona (Spain)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer Sustainability and proximity principles have a key role in waste management. Black-Right-Pointing-Pointer Core indicators are needed in order to quantify and evaluate them. Black-Right-Pointing-Pointer A systematic, step-by-step approach is developed in this study for their development. Black-Right-Pointing-Pointer Transport may play a significant role in terms of environmental and economic costs. Black-Right-Pointing-Pointer Policy action is required in order to advance in the consecution of these principles. - Abstract: In this paper, the material and spatial characterization of the flows within a municipal solid waste (MSW) management system are combined through a Network-Based Spatial Material Flow Analysis. Using this information, two core indicators are developed for the bio-waste fraction, the Net Recovery Index (NRI) and the Transport Intensity Index (TII), which are aimed at assessing progress towards policy-related sustainable MSW management strategies and objectives. The NRI approaches the capacity of a MSW management system for converting waste into resources through a systematic metabolic approach, whereas the TII addresses efficiency in terms of the transport requirements to manage a specific waste flow throughout the entire MSW management life cycle. Therefore, both indicators could be useful in assessing key MSW management policy strategies, such as the consecution of higher recycling levels (sustainability principle) or the minimization of transport by locating treatment facilities closer to generation sources (proximity principle). To apply this methodological approach, the bio-waste management system of the region of Catalonia (Spain) has been chosen as a case study. Results show the adequacy of both indicators for identifying those points within the system with higher capacity to compromise its environmental, economic and social performance and therefore establishing clear targets for policy

  10. Port and EGR Mass Flow Sensors

    DEFF Research Database (Denmark)

    Hendricks, Elbert

    1998-01-01

    The note documents briefly work done on what is thought to be a new method of measurement of the pulsating flow in the intake port ot and SI engine and in the EGR returen line. The work reviewed has been carried out in close cooperation with Civ. Ing. Michael Føns, Civ. Ing. Christian Jepsen, the......, the author (IAU) and Spencer C. Sorenson (ET). The theory which decribes in detail the overall dynamic chracteristics of the sensor was developed at IAU and ET, DTU....

  11. Fiber optic liquid mass flow sensor and method

    Science.gov (United States)

    Korman, Valentin (Inventor); Gregory, Don Allen (Inventor); Wiley, John T. (Inventor); Pedersen, Kevin W. (Inventor)

    2010-01-01

    A method and apparatus are provided for sensing the mass flow rate of a fluid flowing through a pipe. A light beam containing plural individual wavelengths is projected from one side of the pipe across the width of the pipe so as to pass through the fluid under test. Fiber optic couplers located at least two positions on the opposite side of the pipe are used to detect the light beam. A determination is then made of the relative strengths of the light beam for each wavelength at the at least two positions and based at least in part on these relative strengths, the mass flow rate of the fluid is determined.

  12. Laboratory and field trials of Coriolis mass flow metering for three-phase flow measurement

    Science.gov (United States)

    Zhou, Feibiao; Henry, Manus; Tombs, Michael

    2014-04-01

    A new three-phase flow metering technology is discussed in this paper, which combines Coriolis mass flow and water cut readings and without applying any phase separation [1]. The system has undergone formal laboratory trials at TUV NEL (National Engineering Laboratory), UK and at VNIIR (National Flow Laboratory), Kazan, Russia; a number of field trials have taken place in Russia. Laboratory trial results from the TUV NEL will be described in detail. For the 50mm (2") metering system, the total liquid flow rate ranged from 2.4 kg/s up to 11 kg/s, the water cut ranged from 0% to 100%, and the gas volume fraction (GVF) from 0 to 50%. In a formally observed trial, 75 test points were taken at a temperature of approximately 40 °C and with a skid inlet pressure of approximately 350 kPa. Over 95% of the test results fell within the desired specification, defined as follows: the total (oil + water) liquid mass flow error should fall within ± 2.5%, and the gas mass flow error within ± 5.0%. The oil mass flow error limit is ± 6.0% for water cuts less than 70%, while for water cuts between 70% and 95% the oil mass flow error limit is ± 15.0%. These results demonstrate the potential for using Coriolis mass flow metering combined with water cut metering for three-phase (oil/water/gas) measurement.

  13. Pattern Extraction Algorithm for NetFlow-Based Botnet Activities Detection

    Directory of Open Access Journals (Sweden)

    Rafał Kozik

    2017-01-01

    Full Text Available As computer and network technologies evolve, the complexity of cybersecurity has dramatically increased. Advanced cyber threats have led to current approaches to cyber-attack detection becoming ineffective. Many currently used computer systems and applications have never been deeply tested from a cybersecurity point of view and are an easy target for cyber criminals. The paradigm of security by design is still more of a wish than a reality, especially in the context of constantly evolving systems. On the other hand, protection technologies have also improved. Recently, Big Data technologies have given network administrators a wide spectrum of tools to combat cyber threats. In this paper, we present an innovative system for network traffic analysis and anomalies detection to utilise these tools. The systems architecture is based on a Big Data processing framework, data mining, and innovative machine learning techniques. So far, the proposed system implements pattern extraction strategies that leverage batch processing methods. As a use case we consider the problem of botnet detection by means of data in the form of NetFlows. Results are promising and show that the proposed system can be a useful tool to improve cybersecurity.

  14. Optical measurement of a micro coriolis mass flow sensor

    OpenAIRE

    Kristiansen, L.; Mehendale, A.; Brouwer, Dannis Michel; Zwikker, J.M.; Klein, M.E.

    2009-01-01

    Haneveld [1,2] demonstrated a micro Coriolis mass flow sensor, operating in the measurement range of 0 to 1 g/hr achieving a resolution in the order of 10 mg/hr using a laser vibrometer. Equipped with an integrated capacitive [3] readout the measurement uncertainty amounted to 2% of the full scale range. We demonstrate a down-scalable and low-cost optical sensor system that measures the movement of the micro Coriolis mass flow tube with a high resolution. The noise level is measured to be 6 m...

  15. An Efficient Scalable Work-Stealing Runtime for Macro Data Flow Processing Using S-Net

    NARCIS (Netherlands)

    Gijsbers, B.; Grelck, C.

    2014-01-01

    S-Net is a declarative coordination language and component technology aimed at radically facilitating software engineering for modern parallel compute systems by near-complete separation of concerns between application (component) engineering and concurrency orchestration. S-Net builds on the

  16. On the mass dependence of the energy of vanishing flow for superheavy mass region

    Energy Technology Data Exchange (ETDEWEB)

    Bansal, Rajni; Gautam, Sakshi; Puri, Rajeev K. [Panjab University, Department of Physics, Chandigarh (India); Aichelin, J. [Universite de Nantes - IN2P3/CNRS, SUBATECH, Laboratoire de Physique Subatomique et des Technologies Associees, Nantes (France)

    2015-01-01

    Using the isospin-dependent quantum molecular dynamics model, we predict the energy of vanishing flow in the superheavy mass region. Our calculations show significant deviations from the power law mass dependence obtained earlier for stable systems indicating the important role of Coulomb forces. (orig.)

  17. Investigation of the impact of using thermal mass with the net zero energy town house in Toronto using TRNSYS

    Energy Technology Data Exchange (ETDEWEB)

    Siddiqui, O.; Fung, A.; Tse, H.; Zhang, D. [Ryerson Polytechnic Univ., Toronto, ON (Canada). Dept. of Mechanical and Industrial Engineering

    2008-07-01

    Since buildings in Canada account for 30 per cent of the country's total energy consumption, it has become necessary to find ways to reduce the overall energy use in buildings. Heating and cooling loads in buildings can be effectively reduced by using the thermal mass incorporated into the building envelope, particularly in climates where a large daily temperature fluctuations exist. Thermal mass is defined as any building material that has a high heat storage capacity that can be integrated into the structural fabric of the building to use the passive solar energy for heating or cooling purposes. Concrete slabs, bricks and ceramic blocks are some of the commonly used materials. This study analyzed the impact of using thermal mass with a highly insulated building envelope such as that used in Low Energy or Net Zero housing. In particular, TRNSYS was used to simulate a Net Zero Energy Town House located in Toronto, in which a ground source heat pump was integrated with an infloor radiant heating system. The simulation revealed that for colder climates such as in Canada, thermal mass can replace some of the insulation while still providing excellent results in terms of the reductions in daily indoor temperature fluctuations. The impact of thermal mass during the winter was more significant when compared with summer, possibly because of the unique construction and orientation of the Net Zero Energy House. The optimum thickness of the concrete slab was determined to be 6 inches for the winter season and 4 inches for summer. The optimum location for the thermal mass was found to be right next to the gypsum wallboard that forms the interior part of the wall. 12 refs., 1 tab., 11 figs.

  18. Heat and mass transfer and hydrodynamics in swirling flows (review)

    Science.gov (United States)

    Leont'ev, A. I.; Kuzma-Kichta, Yu. A.; Popov, I. A.

    2017-02-01

    Research results of Russian and foreign scientists of heat and mass transfer in whirling flows, swirling effect, superficial vortex generators, thermodynamics and hydrodynamics at micro- and nanoscales, burning at swirl of the flow, and technologies and apparatuses with the use of whirling currents for industry and power generation were presented and discussed at the "Heat and Mass Transfer in Whirling Currents" 5th International Conference. The choice of rational forms of the equipment flow parts when using whirling and swirling flows to increase efficiency of the heat-power equipment and of flow regimes and burning on the basis of deep study of the flow and heat transfer local parameters was set as the main research prospect. In this regard, there is noticeable progress in research methods of whirling and swirling flows. The number of computational treatments of swirling flows' local parameters has been increased. Development and advancement of the up to date computing models and national productivity software are very important for this process. All experimental works are carried out with up to date research methods of the local thermoshydraulic parameters, which enable one to reveal physical mechanisms of processes: PIV and LIV visualization techniques, high-speed and infrared photography, high speed registration of parameters of high-speed processes, etc. There is a problem of improvement of researchers' professional skills in the field of fluid mechanics to set adequately mathematics and physics problems of aerohydrodynamics for whirling and swirling flows and numerical and pilot investigations. It has been pointed out that issues of improvement of the cooling system and thermal protection effectiveness of heat-power and heat-transfer equipment units are still actual. It can be solved successfully using whirling and swirling flows as simple low power consumption exposing on the flow method and heat transfer augmentation.

  19. Modelling of convective heat and mass transfer in rotating flows

    CERN Document Server

    Shevchuk, Igor V

    2016-01-01

     This monograph presents results of the analytical and numerical modeling of convective heat and mass transfer in different rotating flows caused by (i) system rotation, (ii) swirl flows due to swirl generators, and (iii) surface curvature in turns and bends. Volume forces (i.e. centrifugal and Coriolis forces), which influence the flow pattern, emerge in all of these rotating flows. The main part of this work deals with rotating flows caused by system rotation, which includes several rotating-disk configurations and straight pipes rotating about a parallel axis. Swirl flows are studied in some of the configurations mentioned above. Curvilinear flows are investigated in different geometries of two-pass ribbed and smooth channels with 180° bends. The author demonstrates that the complex phenomena of fluid flow and convective heat transfer in rotating flows can be successfully simulated using not only the universal CFD methodology, but in certain cases by means of the integral methods, self-similar and analyt...

  20. A novel concept of measuring mass flow rates using flow induced ...

    Indian Academy of Sciences (India)

    1555–1566. c Indian Academy of Sciences. A novel concept of measuring mass flow rates using flow induced stresses. P I JAGAD1,∗, B P PURANIK2 and A W DATE2. 1Department of Mechanical Engineering, Sinhgad College of Engineering,. Vadgaon (Bk), Pune 411 041, India. 2Department of Mechanical Engineering, ...

  1. The Effect of Mass Media Campaign on the Use of Insecticide-Treated Bed Nets among Pregnant Women in Nigeria

    Directory of Open Access Journals (Sweden)

    A. Ankomah

    2014-01-01

    Full Text Available Background. Malaria during pregnancy is a major public health problem in Nigeria especially in malaria-endemic areas. It increases the risk of low birth weight and child/maternal morbidity/mortality. This paper addresses the impact of radio campaigns on the use of insecticide-treated bed nets among pregnant women in Nigeria. Methods. A total of 2,348 pregnant women were interviewed during the survey across 21 of Nigeria’s 36 states. Respondents were selected through a multistage sampling technique. Analysis was based on multivariate logistic regression. Results. Respondents who knew that sleeping under ITN prevents malaria were 3.2 times more likely to sleep under net (OR: 3.15; 95% CI: 2.28 to 4.33; P<0.0001. Those who listened to radio are also about 1.6 times more likely to use ITN (OR: 1.56; 95% CI: 1.07 to 2.28; P=0.020, while respondents who had heard of a specific sponsored radio campaign on ITN are 1.53 times more likely to use a bed net (P=0.019. Conclusion. Pregnant women who listened to mass media campaigns were more likely to adopt strategies to protect themselves from malaria. Therefore, behavior change communication messages that are aimed at promoting net use and antenatal attendance are necessary in combating malaria.

  2. Topology optimization of mass distribution problems in Stokes flow

    DEFF Research Database (Denmark)

    Gersborg-Hansen, Allan; Berggren, Martin; Dammann, Bernd

    We consider topology optimization of mass distribution problems in 2D and 3D Stokes flow with the aim of designing devices that meet target outflow rates. For the purpose of validation, the designs have been post processed using the image processing tools available in FEMLAB. In turn, this has en...

  3. Micro Coriolis mass flow sensor with integrated resistive pressure sensors

    NARCIS (Netherlands)

    Groenesteijn, Jarno; Alveringh, Dennis; Schut, Thomas; Wiegerink, Remco J.; Sparreboom, Wouter; Lötters, Joost Conrad

    2017-01-01

    We report on novel resistive pressure sensors, integrated on-chip at the inlet- and outlet-channels of a micro Coriolis mass flow sensor. The pressure sensors can be used to measure the pressure drop over the Coriolis sensor which can be used to compensate pressure-dependent behaviour that might

  4. Optical measurement of a micro coriolis mass flow sensor

    NARCIS (Netherlands)

    Kristiansen, L.; Mehendale, A.; Brouwer, Dannis Michel; Zwikker, J.M.; Klein, M.E.

    2009-01-01

    Haneveld [1,2] demonstrated a micro Coriolis mass flow sensor, operating in the measurement range of 0 to 1 g/hr achieving a resolution in the order of 10 mg/hr using a laser vibrometer. Equipped with an integrated capacitive [3] readout the measurement uncertainty amounted to 2% of the full scale

  5. Coriolis mass flow meter using contactless excitation and detection

    NARCIS (Netherlands)

    Mehendale, A.; Lotters, Joost Conrad; Lötters, Joost Conrad; Zwikker, Jan Marinus

    2006-01-01

    A mass flowmeter of the Coriolis type with a tube through which a medium flows during operation and with excitation means for causing the entire tube or part thereof to perform a rotational vibration about a primary axis of rotation during operation. The excitation means are electromagnetic and

  6. Resistive pressure sensors integrated with a Coriolis mass flow sensor

    NARCIS (Netherlands)

    Alveringh, Dennis; Schut, Thomas; Wiegerink, Remco J.; Sparreboom, Wouter; Lötters, Joost Conrad

    2017-01-01

    We report on a novel resistive pressure sensor that is completely integrated with a Coriolis mass flow sensor on one chip, without the need for extra fabrication steps or different materials. Two pressure sensors are placed in-line with the Coriolis sensor without requiring any changes to the fluid

  7. Mass transport enhancement in redox flow batteries with corrugated fluidic networks

    Science.gov (United States)

    Lisboa, Kleber Marques; Marschewski, Julian; Ebejer, Neil; Ruch, Patrick; Cotta, Renato Machado; Michel, Bruno; Poulikakos, Dimos

    2017-08-01

    We propose a facile, novel concept of mass transfer enhancement in flow batteries based on electrolyte guidance in rationally designed corrugated channel systems. The proposed fluidic networks employ periodic throttling of the flow to optimally deflect the electrolytes into the porous electrode, targeting enhancement of the electrolyte-electrode interaction. Theoretical analysis is conducted with channels in the form of trapezoidal waves, confirming and detailing the mass transport enhancement mechanism. In dilute concentration experiments with an alkaline quinone redox chemistry, a scaling of the limiting current with Re0.74 is identified, which compares favourably against the Re0.33 scaling typical of diffusion-limited laminar processes. Experimental IR-corrected polarization curves are presented for high concentration conditions, and a significant performance improvement is observed with the narrowing of the nozzles. The adverse effects of periodic throttling on the pumping power are compared with the benefits in terms of power density, and an improvement of up to 102% in net power density is obtained in comparison with the flow-by case employing straight parallel channels. The proposed novel concept of corrugated fluidic networks comes with facile fabrication and contributes to the improvement of the transport characteristics and overall performance of redox flow battery systems.

  8. Vortical ciliary flows actively enhance mass transport in reef corals.

    Science.gov (United States)

    Shapiro, Orr H; Fernandez, Vicente I; Garren, Melissa; Guasto, Jeffrey S; Debaillon-Vesque, François P; Kramarsky-Winter, Esti; Vardi, Assaf; Stocker, Roman

    2014-09-16

    The exchange of nutrients and dissolved gasses between corals and their environment is a critical determinant of the growth of coral colonies and the productivity of coral reefs. To date, this exchange has been assumed to be limited by molecular diffusion through an unstirred boundary layer extending 1-2 mm from the coral surface, with corals relying solely on external flow to overcome this limitation. Here, we present direct microscopic evidence that, instead, corals can actively enhance mass transport through strong vortical flows driven by motile epidermal cilia covering their entire surface. Ciliary beating produces quasi-steady arrays of counterrotating vortices that vigorously stir a layer of water extending up to 2 mm from the coral surface. We show that, under low ambient flow velocities, these vortices, rather than molecular diffusion, control the exchange of nutrients and oxygen between the coral and its environment, enhancing mass transfer rates by up to 400%. This ability of corals to stir their boundary layer changes the way that we perceive the microenvironment of coral surfaces, revealing an active mechanism complementing the passive enhancement of transport by ambient flow. These findings extend our understanding of mass transport processes in reef corals and may shed new light on the evolutionary success of corals and coral reefs.

  9. APROACHING THE ECONOMIC DIMENSION OF SUSTAINABLE DEVELOPMENT FROM A FINANCIAL PERSPECTIVE: A CASE STUDY REGARDING CASH - FLOW ANALYSIS AND THE RELATIONSIPS BETWEEN CASH - FLOW AND NET INCOME

    Directory of Open Access Journals (Sweden)

    Diana Elena Vasiu

    2014-10-01

    Full Text Available Europe 2020, a strategy for smart, sustainable and inclusive growth stresses the necessity of smart, sustainable and inclusive growth. The objectives of a sustainable economic development include sustaining economic growth, maximizing private profits and expanding markets. Considering this, economic development must based on facts, not on papers. Therefore, considering the economic dimension of sustainable development, it is important to establish if Romanian companies listed and traded on Bucharest Stock Exchange are able to obtain profit while cash is withdrawn. Even if reported in the income statement, net profit is not simultaneously charged due to accrual accounting that makes the balance sheet provide a static picture of the financial position, while the cash flow statement provides a dynamic picture of it. Therefore, the financial performance analysis based on classical indicators of performance must be accompanied by the analysis of treasury, namely of the cash flow, which provides a comprehensive assessment possibility of the financial performance, flexibility and adaptability of the economic entity, in the context of a highly competitive and often unstable environment. A positive net flows is a confirmation of the economic success of the company representing the concrete expression of the net profit and other pecuniary accumulations, interpreted as the real self-financing investment capacity, which would lead to the real asset growth and thus to the increase of the owners' wealth.

  10. A model of airport security work flow based on petri net

    Science.gov (United States)

    Dong, Xinming

    2017-09-01

    Extremely long lines at airports in the United States have been sharply criticized. In order to find out the bottleneck in the existing security system and put forward reasonable improvement plans and proposal, the Petri net model and the Markov Chain are introduced in this paper. This paper uses data collected by transportation Security Agency (TSA), assuming the data can represent the average level of all airports in the Unites States, to analysis the performance of security check system. By calculating the busy probabilities and the utilization probabilities, the bottleneck is found. Moreover, recommendation is given based on the parameters’ modification in Petri net model.

  11. Long-lasting insecticidal nets are synergistic with mass drug administration for interruption of lymphatic filariasis transmission in Nigeria.

    Directory of Open Access Journals (Sweden)

    Abel Eigege

    Full Text Available In central Nigeria Anopheles mosquitoes transmit malaria and lymphatic filariasis (LF. The strategy used for interrupting LF transmission in this area is annual mass drug administration (MDA with albendazole and ivermectin, but after 8 years of MDA, entomological evaluations in sentinel villages showed continued low-grade mosquito infection rates of 0.32%. After long-lasting insecticidal net (LLIN distribution by the national malaria program in late 2010, however, we were no longer able to detect infected vectors over a 24-month period. This is evidence that LLINs are synergistic with MDA in interrupting LF transmission.

  12. Romans-mass-driven flows on the D2-brane

    Energy Technology Data Exchange (ETDEWEB)

    Guarino, Adolfo [Nikhef Theory Group,Science Park 105, 1098 XG Amsterdam (Netherlands); Tarrío, Javier [Physique Théorique et Mathématique, Université Libre de Bruxellesand International Solvay Institutes,ULB-Campus Plaine CP231, B-1050 Brussels (Belgium); Varela, Oscar [Max-Planck-Institut für Gravitationsphysik (Albert-Einstein-Institut),Am Mühlenberg 1, D-14476 Potsdam (Germany); Department of Physics, Utah State University,Logan, UT 84322 (United States)

    2016-08-30

    The addition of supersymmetric Chern-Simons terms to N=8 super-Yang-Mills theory in three-dimensions is expected to make the latter flow into infrared superconformal phases. We address this problem holographically by studying the effect of the Romans mass on the D2-brane near-horizon geometry. Working in a consistent, effective four-dimensional setting provided by D=4N=8 supergravity with a dyonic ISO(7) gauging, we verify the existence of a rich web of supersymmetric domain walls triggered by the Romans mass that interpolate between the (four-dimensional description of the) D2-brane and various superconformal phases. We also construct domain walls for which both endpoints are superconformal. While most of our results are numerical, we provide analytic results for the SU(3)×U(1)-invariant flow into an N=2 conformal phase recently discovered.

  13. Compact Mass Flow Meter Based on a Micro Coriolis Flow Sensor

    Directory of Open Access Journals (Sweden)

    Remco Wiegerink

    2013-03-01

    Full Text Available In this paper we demonstrate a compact ready-to-use micro Coriolis mass flow meter. The full scale flow is 1 g/h (for water at a pressure drop < 1 bar. It has a zero stability of 2 mg/h and an accuracy of 0.5% reading for both liquids and gases. The temperature drift between 10 and 50 °C is below 1 mg/h/°C. The meter is robust, has standard fluidic connections and can be read out by means of a PC or laptop via USB. Its performance was tested for several common gases (hydrogen, helium, nitrogen, argon and air and liquids (water and isopropanol. As in all Coriolis mass flow meters, the meter is also able to measure the actual density of the medium flowing through the tube. The sensitivity of the measured density is ~1 Hz.m3/kg.

  14. Experimental validation of CFD mass transfer simulations in flat channels with non-woven net spacers

    NARCIS (Netherlands)

    Li, F.; Meindersma, G.W.; de Haan, A.B.; Reith, T.

    2004-01-01

    The objective of the present paper is to validate experimentally the mass transfer simulations presented in a previous paper by the same authors [J. Membr. Sci. 208 (2002) 289]. In the present study, mass transfer coefficients were obtained by the limiting current method. The results from CFD

  15. The geomagnetic mass spectrometer - Mass and energy dispersions of ionospheric ion flows into the magnetosphere

    Science.gov (United States)

    Lockwood, M.; Moore, T. E.; Waite, J. H., Jr.; Chappell, C. R.; Horwitz, J. L.

    1985-01-01

    Observations of ion flows in the polar magnetosphere, made by the retarding ion mass spectrometer on NASA's Dynamics Explorer (DE) 1, are compared with those made simultaneously in the topside ionosphere by the ion drift meter on the lower-altitude DE 2 spacecraft. The results show the dayside auroral ionosphere to be a significant and highly persistent source of plasma for the magnetosphere. The upwelling ionospheric ions are spatially dispersed, according to both their energy and mass, by the combined actions of the geomagnetic field and the dawn-to-dusk convection electric field, in an effect analogous to the operation of an ion mass spectrometer.

  16. Compact mass flow meter based on a micro Coriolis flow sensor

    NARCIS (Netherlands)

    Sparreboom, Wouter; Katerberg, M.R.; Lammerink, Theodorus S.J.; Postma, F.M.; Haneveld, J.; Groenesteijn, Jarno; Wiegerink, Remco J.; Lötters, Joost Conrad

    2012-01-01

    In this paper we present a compact ready-to-use micro Coriolis mass flow meter. The full scale flow is 2 g/h (for water at a pressure drop of 2 bar). It has a zero stability of 2 mg/h and an accuracy of 0.5% reading. The temperature drift between 10 and 50 ºC is below 1 mg/h/ºC. The meter is robust,

  17. Compact mass flow meter based on a micro coriolis flow sensor

    NARCIS (Netherlands)

    Sparreboom, Wouter; van de Geest, Jan; Katerberg, Marcel; Postma, F.M.; Haneveld, J.; Groenesteijn, Jarno; Lammerink, Theodorus S.J.; Wiegerink, Remco J.; Lötters, Joost Conrad

    2013-01-01

    In this paper we demonstrate a compact ready-to-use micro Coriolis mass flow meter. The full scale flow is 1 g/h (for water at a pressure drop < 1 bar). It has a zero stability of 2 mg/h and an accuracy of 0.5% reading for both liquids and gases. The temperature drift between 10 and 50 °C is below 1

  18. Two-phase flow with mass transfer in bubble columns

    Energy Technology Data Exchange (ETDEWEB)

    Mewes, D.; Wiemann, D. [Institute of Process Engineering, University of Hannover, D-30167 Hannover (Germany)

    2003-08-06

    Bubble columns are widely used in the chemical and biochemical industries. In these reactors a gaseous phase is dispersed into a continuous liquid phase thus the rising bubble swarm induces a circulating flow field. For the dimension of these reactors the local interfacial area and the residence time of the liquid and the gaseous phase are key parameters. In this paper an Euler-Euler approach is used to calculate the flow field in bubble columns numerically. Therefore a transport equation for the mean bubble volume based on a population balance equation approach is coupled with the balance equations for mass and momentum. The calculations are performed for three-dimensional, instationary flow fields in cylindrical bubble columns considering the homogeneous and the heterogeneous flow regime. For the interphase mass transfer the physical absorption of the gaseous phase into the liquid is assumed. The back mixing in the gaseous and liquid phase is calculated from the local and time dependent concentration of a tracer. (Abstract Copyright [2003], Wiley Periodicals, Inc.)

  19. Digital image processing based mass flow rate measurement of gas/solid two-phase flow

    Energy Technology Data Exchange (ETDEWEB)

    Song Ding; Peng Lihui; Lu Geng; Yang Shiyuan [Tsinghua National Laboratory for Information Science and Technology, Department of Automation, Tsinghua University, Beijing, 100084 (China); Yan Yong, E-mail: lihuipeng@tsinghua.edu.c [University of Kent, Canterbury, Kent CT2 7NT (United Kingdom)

    2009-02-01

    With the rapid growth of the process industry, pneumatic conveying as a tool for the transportation of a wide variety of pulverized and granular materials has become widespread. In order to improve plant control and operational efficiency, it is essential to know the parameters of the particle flow. This paper presents a digital imaging based method which is capable of measuring multiple flow parameters, including volumetric concentration, velocity and mass flow rate of particles in the gas/solid two phase flow. The measurement system consists of a solid state laser for illumination, a low-cost CCD camera for particle image acquisition and a microcomputer with bespoke software for particle image processing. The measurements of particle velocity and volumetric concentration share the same sensing hardware but use different exposure time and different image processing methods. By controlling the exposure time of the camera a clear image and a motion blurred image are obtained respectively. The clear image is thresholded by OTSU method to identify the particles from the dark background so that the volumetric concentration is determined by calculating the ratio between the particle area and the total area. Particle velocity is derived from the motion blur length, which is estimated from the motion blurred images by using the travelling wave equation method. The mass flow rate of particles is calculated by combining the particle velocity and volumetric concentration. Simulation and experiment results indicate that the proposed method is promising for the measurement of multiple parameters of gas/solid two-phase flow.

  20. Real-time DDoS attack detection for Cisco IOS using NetFlow

    NARCIS (Netherlands)

    van der Steeg, Daniël; Hofstede, R.J.; Sperotto, Anna; Pras, Aiko

    Flow-based DDoS attack detection is typically performed by analysis applications that are installed on or close to a flow collector. Although this approach allows for easy deployment, it makes detection far from real-time and susceptible to DDoS attacks for the following reasons. First, the fact

  1. Control and Automation of Fluid Flow, Mass Transfer and Chemical Reactions in Microscale Segmented Flow

    Science.gov (United States)

    Abolhasani, Milad

    Flowing trains of uniformly sized bubbles/droplets (i.e., segmented flows) and the associated mass transfer enhancement over their single-phase counterparts have been studied extensively during the past fifty years. Although the scaling behaviour of segmented flow formation is increasingly well understood, the predictive adjustment of the desired flow characteristics that influence the mixing and residence times, remains a challenge. Currently, a time consuming, slow and often inconsistent manual manipulation of experimental conditions is required to address this task. In my thesis, I have overcome the above-mentioned challenges and developed an experimental strategy that for the first time provided predictive control over segmented flows in a hands-off manner. A computer-controlled platform that consisted of a real-time image processing module within an integral controller, a silicon-based microreactor and automated fluid delivery technique was designed, implemented and validated. In a first part of my thesis I utilized this approach for the automated screening of physical mass transfer and solubility characteristics of carbon dioxide (CO2) in a physical solvent at a well-defined temperature and pressure and a throughput of 12 conditions per hour. Second, by applying the segmented flow approach to a recently discovered CO2 chemical absorbent, frustrated Lewis pairs (FLPs), I determined the thermodynamic characteristics of the CO2-FLP reaction. Finally, the segmented flow approach was employed for characterization and investigation of CO2-governed liquid-liquid phase separation process. The second part of my thesis utilized the segmented flow platform for the preparation and shape control of high quality colloidal nanomaterials (e.g., CdSe/CdS) via the automated control of residence times up to approximately 5 minutes. By introducing a novel oscillatory segmented flow concept, I was able to further extend the residence time limitation to 24 hours. A case study of a

  2. Heat and mass transfer in porous cavity: Assisting flow

    Energy Technology Data Exchange (ETDEWEB)

    Badruddin, Irfan Anjum [Dept. of Mechanical Engineering, University of Malaya, Kuala Lumpur, 50603 (Malaysia); Quadir, G. A. [School of Mechatronic Engineering, University Malaysia Perlis, Pauh Putra, 02600 Arau, Perlis (Malaysia)

    2016-06-08

    In this paper, investigation of heat and mass transfer in a porous cavity is carried out. The governing partial differential equations are non-dimensionalised and solved using finite element method. The left vertical surface of the cavity is maintained at constant temperature and concentration which are higher than the ambient temperature and concentration applied at right vertical surface. The top and bottom walls of the cavity are adiabatic. Heat transfer is assumed to take place by natural convection and radiation. The investigation is carried out for assisting flow when buoyancy and gravity force act in same direction.

  3. Probabilistic and Other Neural Nets in Multi-Hole Probe Calibration and Flow Angularity Pattern Recognition

    Science.gov (United States)

    Baskaran, Subbiah; Ramachandran, Narayanan; Noever, David

    1998-01-01

    The use of probabilistic (PNN) and multilayer feed forward (MLFNN) neural networks are investigated for calibration of multi-hole pressure probes and the prediction of associated flow angularity patterns in test flow fields. Both types of networks are studied in detail for their calibration and prediction characteristics. The current formalism can be applied to any multi-hole probe, however the test results for the most commonly used five-hole Cone and Prism probe types alone are reported in this article.

  4. Remote Quantification of Smokestack Total Effluent Mass Flow Rates Using Imaging Fourier-Transform Spectroscopy

    Science.gov (United States)

    2011-03-01

    total effluent mass flow rates by combining spectrally-determined species concentrations with flow rates estimated via analysis of sequential images...of the flow velocity. Final effluent mass flow rates for CO2 and SO2 of 13.5 +- 3.78 kg/s and 71.3 +- 19.3 g/s were in good agreement with in situ

  5. Mechanisms of flow and water mass variability in Denmark Strait

    Science.gov (United States)

    Moritz, Martin; Jochumsen, Kerstin; Quadfasel, Detlef; Mashayekh Poul, Hossein; Käse, Rolf H.

    2017-04-01

    The dense water export through Denmark Strait contributes significantly to the lower limb of the Atlantic Meridional Overturning Circulation. Overflow water is transported southwestward not only in the deep channel of the Strait, but also within a thin bottom layer on the Greenland shelf. The flow on the shelf is mainly weak and barotropic, exhibiting many recirculations, but may eventually contribute to the overflow layer in the Irminger Basin by spilling events in the northern Irminger Basin. Especially the circulation around Dohrn Bank and the Kangerdlussuaq Trough contribute to the shelf-basin exchange. Moored observations show the overflow in Denmark Strait to be stable during the last 20 years (1996-2016). Nevertheless, flow variability was noticed on time scales of eddies and beyond, i.e. on weekly and interannual scales. Here, we use a combination of mooring data and shipboard hydrographic and current data to address the dominant modes of variability in the overflow, which are (i) eddies, (ii) barotropic pulsations of the plume, (iii) lateral shifts of the plume core position, and (iv) variations in vertical extension, i.e. varying overflow thickness. A principle component analysis is carried out and related to variations in sea surface height and wind stress, derived from satellite measurements. Furthermore, a test for topographic waves is performed. Shelf contributions to the overflow core in the Irminger Basin are identified from measurements of temperature and salinity, as well as velocity, which were obtained during recent cruises in the region. The flow and water mass pattern obtained from the observational data is compared to simulations in a high resolution regional model (ROMS), where tracer release experiments and float deployments were carried out. The modelling results allow a separation between different atmospheric forcing modes (NAO+ vs NAO- situations), which impact the water mass distribution and alter the dense water pathways on the

  6. Numerical Calibration of Mass Flow Plug for Inlet Testing

    Science.gov (United States)

    Sasson, Jonathan; Barnhart, Paul; Davis, David O.

    2015-01-01

    A simple control volume model has been developed to calculate the discharge coefficient through a mass flow plug (MFP) and validated with a calibration experiment. The maximum error of the model within the operating region of the MFP is 0.54%. The control volume analysis developed work is comprised of a sequence of flow calculations through the MFP. The model uses the MFP geometry and operating pressure and temperature to couple continuity, momentum, energy, an equation of state, and wall shear. The discharge coefficient calculation also includes the effects of boundary layer growth, including the reduction in cross-sectional flow area as characterized by the boundary layer displacement thickness. The last calculation in the sequence uses an integral method to calculate the growth of the boundary layer, from which the displacement thickness is then determined. The result of these successive calculations is an accurate one-dimension model of the velocity, pressure, and temperature through the MFP. For comparison, a computational fluid dynamic (CFD) calibration is shown, which when compared to the presented numerical model, had a lower accuracy with a maximum error of 1.35% in addition to being slower by a factor of 100."

  7. Towards real-time intrusion detection for NetFlow and IPFIX

    NARCIS (Netherlands)

    Hofstede, R.J.; Bartos, Vaclav; Sperotto, Anna; Pras, Aiko

    2013-01-01

    DDoS attacks bring serious economic and technical damage to networks and enterprises. Timely detection and mitigation are therefore of great importance. However, when flow monitoring systems are used for intrusion detection, as it is often the case in campus, enterprise and backbone networks, timely

  8. NetFCM: A Semi-Automated Web-Based Method for Flow Cytometry Data Analysis

    DEFF Research Database (Denmark)

    Frederiksen, Juliet Wairimu; Buggert, Marcus; Karlsson, Annika C.

    2014-01-01

    Multi-parametric flow cytometry (FCM) represents an invaluable instrument to conduct single cell analysis and has significantly increased our understanding of the immune system. However, due to new techniques allowing us to measure an increased number of phenotypes within the immune system, FCM...... for Advancement of Cytometry...

  9. Use of Interrupted Helium Flow in the Analysis of Vapor Samples with Flowing Atmospheric-Pressure Afterglow-Mass Spectrometry

    Science.gov (United States)

    Storey, Andrew P.; Zeiri, Offer M.; Ray, Steven J.; Hieftje, Gary M.

    2017-02-01

    The flowing atmospheric-pressure afterglow (FAPA) source was used for the mass-spectrometric analysis of vapor samples introduced between the source and mass spectrometer inlet. Through interrupted operation of the plasma-supporting helium flow, helium consumption is greatly reduced and dynamic gas behavior occurs that was characterized by schlieren imaging. Moreover, mass spectra acquired immediately after the onset of helium flow exhibit a signal spike before declining and ultimately reaching a steady level. This initial signal appears to be due to greater interaction of sample vapor with the afterglow of the source when helium flow resumes. In part, the initial spike in signal can be attributed to a pooling of analyte vapor in the absence of helium flow from the source. Time-resolved schlieren imaging of the helium flow during on and off cycles provided insight into gas-flow patterns between the FAPA source and the MS inlet that were correlated with mass-spectral data.

  10. Simultaneous Moisture Content and Mass Flow Measurements in Wood Chip Flows Using Coupled Dielectric and Impact Sensors.

    Science.gov (United States)

    Pan, Pengmin; McDonald, Timothy; Fulton, John; Via, Brian; Hung, John

    2016-12-23

    An 8-electrode capacitance tomography (ECT) sensor was built and used to measure moisture content (MC) and mass flow of pine chip flows. The device was capable of directly measuring total water quantity in a sample but was sensitive to both dry matter and moisture, and therefore required a second measurement of mass flow to calculate MC. Two means of calculating the mass flow were used: the first being an impact sensor to measure total mass flow, and the second a volumetric approach based on measuring total area occupied by wood in images generated using the capacitance sensor's tomographic mode. Tests were made on 109 groups of wood chips ranging in moisture content from 14% to 120% (dry basis) and wet weight of 280 to 1100 g. Sixty groups were randomly selected as a calibration set, and the remaining were used for validation of the sensor's performance. For the combined capacitance/force transducer system, root mean square errors of prediction (RMSEP) for wet mass flow and moisture content were 13.42% and 16.61%, respectively. RMSEP using the combined volumetric mass flow/capacitance sensor for dry mass flow and moisture content were 22.89% and 24.16%, respectively. Either of the approaches was concluded to be feasible for prediction of moisture content in pine chip flows, but combining the impact and capacitance sensors was easier to implement. In situations where flows could not be impeded, however, the tomographic approach would likely be more useful.

  11. Response timescales for martian ice masses and implications for ice flow on Mars

    DEFF Research Database (Denmark)

    Koutnik, Michelle Rebecca; Waddington, E.D.; Winebrener, D.P.

    2013-01-01

    ice-flow rates were more significant than today. A plausible range of near-basal ice temperatures and ice-flow enhancement factors can generate the characteristic geometry of an ice mass that has been shaped by flow over reasonable volume-response timescales. All plausible ice-flow scenarios require......On Earth and on Mars, ice masses experience changes in precipitation, temperature, and radiation. In a new climate state, flowing ice masses will adjust in length and in thickness, and this response toward a new steady state has a characteristic timescale. However, a flowing ice mass has...... a predictable shape, which is a function of ice temperature, ice rheology, and surface mass-exchange rate. In addition, the time for surface-shape adjustment is shorter than the characteristic time for significant deformation or displacement of internal layers within a flowing ice mass; as a result, surface...

  12. GeoSteamNet: A computer code to simulate geothermal steam flow in a pipeline network; GeoSteamNet: Programa de computo para simular el flujo de vapor geotermico de una red de vaporductos

    Energy Technology Data Exchange (ETDEWEB)

    Verma P., Mahendra; Aragon A., Alfonso [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico)]. E-mail: mahendra@iie.org.mx; Ruiz L., Alejando; Mendoza C., Alfredo [Comision Federal de Electricidad, Campo Geotermico Los Azufres, Campamento Agua Fria, Michoacan (Mexico)

    2011-07-15

    A computer package, GeoSteamNet, was developed to simulate steam transport in a pipeline network of a geothermal field. The fluid motion is governed by the following basic principles: conservation of mass, linear momentum principle (Newton's second law or the Navier Stokes equations), and the first and second laws of thermodynamics. The second law of thermodynamics defines the direction of a spontaneous process, which is indirectly validated in the algorithm as vapor flows from high-to-low pressure, and heat flows from high-to-low temperatures. The nonlinear equations are solved with the Newton-Raphson method. Using the ActiveX component OrificeMeter, the steam-flow balance was calculated for power plants U-15 and U-16 in Los Azufres Geothermal Field, Mich., in February 2009. U-15 was fed by the production wells AZ-04, AZ-28, AZ-30, AZ-65D, and AZ-66, whereas wells AZ-28A, AZ-45, AZ-56, AZ-67, AZ-69D were connected to U-16. The analytical error is within {+-}4%, which is acceptable for practical purposes for steam-supply management, considering the uncertainties in parameters, such as pressure, temperature, pressure fluctuation at the wellhead, etc. The steam simulation results by GeoSteamNet for a hypothetical-pipeline network in a geothermal system with two production wells and a power plant illustrate its functionality. Several points need to be emphasized. For a specific geometry-pipeline network, there is only a certain amount of mass (vapor) that can be transported at a given pressure at the wellheads and the power plant. The construction and modification of a pipeline network is very expensive and the production of geothermal wells depends on many natural factors; therefore, there is need to conduct a tolerance study for each component of the network. A simulation study of the virtual-pipeline network for the design of a geothermal power plant can save money, effort, and time. [Spanish] Se desarrollo un paquete de computo, GeoSteamNet, para simular el

  13. Besnoitia besnoiti infections activate primary bovine endothelial cells and promote PMN adhesion and NET formation under physiological flow condition.

    Science.gov (United States)

    Maksimov, P; Hermosilla, C; Kleinertz, S; Hirzmann, J; Taubert, A

    2016-05-01

    Besnoitia besnoiti is an obligate intracellular and emerging coccidian parasite of cattle that mainly infects host endothelial cells during acute infection. We here analyzed early innate immune reactions of B. besnoiti-infected primary bovine umbilical vein endothelial cells (BUVEC). B. besnoiti infections significantly activated BUVEC since the gene transcripts of several adhesion molecules (P-selectin, intercellular adhesion molecule 1(ICAM-1)), chemokines (CXCL1, CXCL8, CCL5), and of COX-2 were significantly upregulated during in vitro infection. Overall, the highest upregulation of most transcripts was observed at 24 or 48 h post infection (p.i.). Enhanced adhesion molecule expression in infected host cells was confirmed by PMN adhesion assays being performed under physiological flow conditions revealing a significantly increased PMN adhesion on B. besnoiti-infected BUVEC layers at 24 h p.i. Furthermore, we were able to illustrate neutrophil extracellular traps (NETs) being released by PMN under physiological flow conditions after adhesion to B. besnoiti-infected BUVEC layers. The present study shows that B. besnoiti infections of primary BUVEC induce a cascade of pro-inflammatory reactions and triggers early innate immune responses.

  14. Design and construction of a novel Coriolis mass flow rate meter

    NARCIS (Netherlands)

    Mehendale, A.; Zwikker, Rini; Jouwsma, Wybren

    2009-01-01

    The Coriolis principle for measuring flow rates has great advantages compared to other flow measurement principles, the most important being that mass flow is measured directly. Up to now the measurement of low flow rates posed a great challenge. In a joint research project, the University of Twente

  15. Evaluation of the association between long-lasting insecticidal nets mass distribution campaigns and child malaria in Nigeria

    Directory of Open Access Journals (Sweden)

    Kyu Hmwe Hmwe

    2013-01-01

    Full Text Available Abstract Background Nigeria carries the greatest malaria burden among countries in the world. As part of the National Malaria Control Strategic Plan, free long-lasting insecticidal nets (LLINs were distributed in 14 states of Nigeria through mass campaigns led by different organizations (the World Bank, UNICEF, or the Global Fund between May 2009 and August 2010. The objective of this study was to evaluate the association between LLIN distribution campaigns and child malaria in Nigeria. Methods Data were from the Nigeria Malaria Indicator Survey which was carried out from October to December 2010 on a nationally representative sample of households. Participants were women aged 15–49 years and their children aged less than five years (N = 4082. The main outcome measure was the presence or absence of malaria parasites in blood samples of children (6–59 months. Results Compared with children living in communities with no campaigns, those in the campaign areas were less likely to test positive for malaria after adjusting for geographic locations, community- and individual-level characteristics including child-level use of insecticide-treated nets (ITNs. The protective effects were statistically significant for the World Bank Booster Project areas (OR = 0.18, 95% CI = 0.04-0.73 but did not reach statistical significance for other campaign areas. Results also showed that community-level wealth (OR = 0.51, 95% CI = 0.34-0.76, community-level maternal knowledge regarding malaria prevention (OR = 0.70, 95% CI = 0.50-0.97, and child-level use of ITNs (OR = 0.79, 95% CI = 0.63-0.99 were negatively associated with child malaria. Conclusions The observed protective effects on child malaria of these campaigns (statistically significant in the World Bank Booster Project areas and non-significant in the other areas need to be corroborated by future effectiveness studies. Results also show that improving community

  16. Simultaneous Moisture Content and Mass Flow Measurements in Wood Chip Flows Using Coupled Dielectric and Impact Sensors

    Directory of Open Access Journals (Sweden)

    Pengmin Pan

    2016-12-01

    Full Text Available An 8-electrode capacitance tomography (ECT sensor was built and used to measure moisture content (MC and mass flow of pine chip flows. The device was capable of directly measuring total water quantity in a sample but was sensitive to both dry matter and moisture, and therefore required a second measurement of mass flow to calculate MC. Two means of calculating the mass flow were used: the first being an impact sensor to measure total mass flow, and the second a volumetric approach based on measuring total area occupied by wood in images generated using the capacitance sensor’s tomographic mode. Tests were made on 109 groups of wood chips ranging in moisture content from 14% to 120% (dry basis and wet weight of 280 to 1100 g. Sixty groups were randomly selected as a calibration set, and the remaining were used for validation of the sensor’s performance. For the combined capacitance/force transducer system, root mean square errors of prediction (RMSEP for wet mass flow and moisture content were 13.42% and 16.61%, respectively. RMSEP using the combined volumetric mass flow/capacitance sensor for dry mass flow and moisture content were 22.89% and 24.16%, respectively. Either of the approaches was concluded to be feasible for prediction of moisture content in pine chip flows, but combining the impact and capacitance sensors was easier to implement. In situations where flows could not be impeded, however, the tomographic approach would likely be more useful.

  17. Mass, momentum and energy flow from an MPD accelerator. Ph.D. Thesis

    Science.gov (United States)

    Cory, J. S.

    1971-01-01

    The mass, momentum, and energy flows are measured over a current range of 8 to 50 kA and inlet mass flows of 2 to 36q/sec of argon. The momentum flux profile indicates that the accelerator produces a uniform, 2-inch diameter axial jet at the anode which expands into a Gaussian profile at an axial station 11 inches from the anode. The electromagnetic component of the thrust is found to follow the familiar quadratic dependence on arc current, while a more complex empirical relation is needed to correlate the gasdynamic contribution with the current and mass flow rate. Using available time-of-flight velocity profiles at a current of 16 kA and a mass flow of 5.9 g/sec, calculated flux profiles of mass and kinetic energy exhibit a tendency for some fraction of the inlet mass flow to leak out at a low velocity around the central high velocity core.

  18. Influence of Reduced Mass Flow Rate and Chamber Backpressure on Swirl Injector Fluid Mechanics

    Science.gov (United States)

    Kenny, R Jeremy; Hulka, James R.

    2008-01-01

    Industry interest in variable-thrust liquid rocket engines places a demand on engine injector technology to operate over a wide range of liquid mass flow rates and chamber backpressures. One injection technology of current interest for variable thrust applications is an injector design with swirled fluids. Current swirl injector design methodologies do not take into account how swirl injector design parameters respond to elevated chamber backpressures at less than design mass flow rates. The current work was created to improve state-of-the-art swirl injector design methods in this area. The specific objective was to study the effects of elevated chamber backpressure and off-design mass flow rates on swirl injector fluid mechanics. Using a backpressure chamber with optical access, water was flowed through a swirl injector at various combinations of chamber backpressure and mass flow rates. The film thickness profile down the swirl injector nozzle section was measured through a transparent nozzle section of the injector. High speed video showed measurable increases in the film thickness profile with application of chamber backpressure and mass flow rates less than design. At prescribed combinations of chamber backpressure and injected mass flow rate, a discrete change in the film thickness profile was observed. Measured injector discharge coefficient values showed different trends with increasing chamber backpressure at low mass flow rates as opposed to near-design mass flow rates. Downstream spray angles showed classic changes in morphology as the mass flow rate was decreased below the design value. Increasing chamber backpressure decreased the spray angle at any injection mass flow rate. Experimental measurements and discussion of these results are reported in this paper.

  19. Effect of Retarding Force on Mass Flow Rates of Fluid at Different ...

    African Journals Online (AJOL)

    ... mathematical model and software visualization to view the effect of retarding forces on the mass flow rate in term of visualization. C-sharp (C#) is the chosen program and this enable compares and us to determine the mass flow rates patterns in relation to retarding force in form of graphical tables at different temperature.

  20. A novel capacitive detection principle for Coriolis mass flow sensors enabling range/sensitivity tuning

    NARCIS (Netherlands)

    Alveringh, Dennis; Groenesteijn, Jarno; Ma, Kechun; Wiegerink, Remco J.; Lötters, Joost Conrad

    2015-01-01

    We report on a novel capacitive detection principle for Coriolis mass flow sensors which allows for one order of magnitude increased sensitivity. The detection principle consists of two pairs of comb-structures: one pair produces two signals with a phase shift directly dependent on the mass flow,

  1. Simulation a Disposable mass flow meter by an advanced FSI Modeling and Finite Element Analysis.

    OpenAIRE

    zadeh, Siavash Hooshmand

    2014-01-01

    Abstract -In this thesis a design of a Coriolis mass flow-meter is chosen by considering all advantages and disadvantages and the project requirements. The chosen geometry is imported into COMSOL, because modelling is implemented by FEM and two different physics should be coupled. To consider both applications of the device include measuring density and flow rate, modeling is divided into two parts: Coriolis density meter and Coriolis mass flow-meter. Both applications are based on Fluid Stru...

  2. Mass transfer from a sphere in an oscillating flow with zero mean velocity

    Science.gov (United States)

    Drummond, Colin K.; Lyman, Frederic A.

    1990-01-01

    A pseudospectral numerical method is used for the solution of the Navier-Stokes and mass transport equations for a sphere in a sinusoidally oscillating flow with zero mean velocity. The flow is assumed laminar and axisymmetric about the sphere's polar axis. Oscillating flow results were obtained for Reynolds numbers (based on the free-stream oscillatory flow amplitude) between 1 and 150, and Strouhal numbers between 1 and 1000. Sherwood numbers were computed and their dependency on the flow frequency and amplitude discussed. An assessment of the validity of the quasi-steady assumption for mass transfer is based on these results.

  3. Effects of pyrethroid resistance on the cost effectiveness of a mass distribution of long-lasting insecticidal nets: a modelling study.

    Science.gov (United States)

    Briët, Olivier J T; Penny, Melissa A; Hardy, Diggory; Awolola, Taiwo S; Van Bortel, Wim; Corbel, Vincent; Dabiré, Roch K; Etang, Josiane; Koudou, Benjamin G; Tungu, Patrick K; Chitnis, Nakul

    2013-02-25

    The effectiveness of insecticide-treated nets in preventing malaria is threatened by developing resistance against pyrethroids. Little is known about how strongly this affects the effectiveness of vector control programmes. Data from experimental hut studies on the effects of long-lasting, insecticidal nets (LLINs) on nine anopheline mosquito populations, with varying levels of mortality in World Health Organization susceptibility tests, were used to parameterize malaria models. Both simple static models predicting population-level insecticidal effectiveness and protection against blood feeding, and complex dynamic epidemiological models, where LLINs decayed over time, were used. The epidemiological models, implemented in OpenMalaria, were employed to study the impact of a single mass distribution of LLINs on malaria, both in terms of episodes prevented during the effective lifetime of the batch of LLINs, and in terms of net health benefits (NHB) expressed in disability-adjusted life years (DALYs) averted during that period, depending on net type (standard pyrethroid-only LLIN or pyrethroid-piperonyl butoxide combination LLIN), resistance status, coverage and pre-intervention transmission level. There were strong positive correlations between insecticide susceptibility status and predicted population level insecticidal effectiveness of and protection against blood feeding by LLIN intervention programmes. With the most resistant mosquito population, the LLIN mass distribution averted up to about 40% fewer episodes and DALYs during the effective lifetime of the batch than with fully susceptible populations. However, cost effectiveness of LLINs was more sensitive to the pre-intervention transmission level and coverage than to susceptibility status. For four out of the six Anopheles gambiae sensu lato populations where direct comparisons between standard LLINs and combination LLINs were possible, combination nets were more cost effective, despite being more expensive

  4. Standardization of flow cytometry in myelodysplastic syndromes: report from the first European LeukemiaNet working conference on flow cytometry in myelodysplastic syndromes

    Science.gov (United States)

    van de Loosdrecht, Arjan A.; Alhan, Canan; Béné, Marie Christine; Della Porta, Matteo G.; Dräger, Angelika M.; Feuillard, Jean; Font, Patricia; Germing, Ulrich; Haase, Detlef; Homburg, Christa H.; Ireland, Robin; Jansen, Joop H.; Kern, Wolfgang; Malcovati, Luca; te Marvelde, Jeroen G.; Mufti, Ghulam J.; Ogata, Kiyoyuki; Orfao, Alberto; Ossenkoppele, Gert J.; Porwit, Anna; Preijers, Frank W.; Richards, Stephen J.; Schuurhuis, Gerrit Jan; Subirá, Dolores; Valent, Peter; van der Velden, Vincent H.J.; Vyas, Paresh; Westra, August H.; de Witte, Theo M.; Wells, Denise A.; Loken, Michael R.; Westers, Theresia M.

    2009-01-01

    The myelodysplastic syndromes are a group of clonal hematopoietic stem cell diseases characterized by cytopenia(s), dysplasia in one or more cell lineages and increased risk of evolution to acute myeloid leukemia (AML). Recent advances in immunophenotyping of hematopoietic progenitor and maturing cells in dysplastic bone marrow point to a useful role for multiparameter flow cytometry (FCM) in the diagnosis and prognostication of myelodysplastic syndromes. In March 2008, representatives from 18 European institutes participated in a European LeukemiaNet (ELN) workshop held in Amsterdam as a first step towards standardization of FCM in myelodysplastic syndromes. Consensus was reached regarding standard methods for cell sampling, handling and processing. The group also defined minimal combinations of antibodies to analyze aberrant immunophenotypes and thus dysplasia. Examples are altered numbers of CD34+ precursors, aberrant expression of markers on myeloblasts, maturing myeloid cells, monocytes or erythroid precursors and the expression of lineage infidelity markers. When applied in practice, aberrant FCM patterns correlate well with morphology, the subclassification of myelodysplastic syndromes, and prognostic scoring systems. However, the group also concluded that despite strong evidence for an impact of FCM in myelodysplastic syndromes, further (prospective) validation of markers and immunophenotypic patterns are required against control patient groups as well as further standardization in multi-center studies. Standardization of FCM in myelodysplastic syndromes may thus contribute to improved diagnosis and prognostication of myelodysplastic syndromes in the future. PMID:19546437

  5. Effects of changing mosquito host searching behaviour on the cost effectiveness of a mass distribution of long-lasting, insecticidal nets : a modelling study

    OpenAIRE

    Briët, Olivier JT; Chitnis, Nakul

    2013-01-01

    Background The effectiveness of long-lasting, insecticidal nets (LLINs) in preventing malaria is threatened by the changing biting behaviour of mosquitoes, from nocturnal and endophagic to crepuscular and exophagic, and by their increasing resistance to insecticides. Methods Using epidemiological stochastic simulation models, we studied the impact of a mass LLIN distribution on Plasmodium falciparum malaria. Specifically, we looked at impact in terms of episodes prevented during the effective...

  6. THE EFFECT OF THE STARTING LENGTH ON MASS TRANSFER FROM A CONE IN SUPERSONIC FLOW.

    Science.gov (United States)

    The purpose of this investigation was to see what effect, if any, the starting length had on mass transfer from a cone. A blowdown supersonic wind...tunnel was utilized to bring about a flow regime of approximately Mach 3.15. The experimental results of mass transfer from cones in supersonic flow...are presented and a comparison to theoretical values is made. The cones used in the mass transfer tests were made of copper coated with p

  7. Modification of vortex dynamics and transport properties of transitional axisymmetric jets using zero-net-mass-flux actuation

    Energy Technology Data Exchange (ETDEWEB)

    Önder, Asim; Meyers, Johan, E-mail: johan.meyers@mech.kuleuven.be [Department of Mechanical Engineering, KU Leuven, Celestijnenlaan 300A, B3001 Leuven (Belgium)

    2014-07-15

    We study the near field of a zero-net-mass-flux (ZNMF) actuated round jet using direct numerical simulations. The Reynolds number of the jet Re{sub D} = 2000 and three ZNMF actuators are used, evenly distributed over a circle, and directed towards the main jet. The actuators are triggered in phase, and have a relatively low momentum coefficient of C{sub μ} = 0.0049 each. We study four different control frequencies with Strouhal numbers ranging from St{sub D} = 0.165 to St{sub D} = 1.32; next to that, also two uncontrolled baseline cases are included in the study. We find that this type of ZNMF actuation leads to strong deformations of the near-field jet region that are very similar to those observed for non-circular jets. At the end of the jet's potential core (x/D = 5), the jet-column cross section is deformed into a hexagram-like geometry that results from strong modifications of the vortex structures. Two mechanisms lead to these modifications, i.e., (i) self-deformation of the jet's primary vortex rings started by distortions in their azimuthal curvature by the actuation, and (ii) production of side jets by the development and subsequent detachment of secondary streamwise vortex pairs. Further downstream (x/D = 10), the jet transforms into a triangular pattern, as the sharp corner regions of the hexagram entrain fluid and spread. We further investigate the global characteristics of the actuated jets. In particular when using the jet preferred frequency, i.e., St{sub D} = 0.33, parameters such as entrainment, centerline decay rate, and mean turbulent kinetic energy are significantly increased. Furthermore, high frequency actuation, i.e., St{sub D} = 1.32, is found to suppress the mechanisms leading to large scale structure growth and turbulent kinetic energy production. The simulations further include a passive scalar equation, and passive scalar mixing is also quantified and visualized.

  8. A Mass Conservative Numerical Solution for Two-Phase Flow in Porous Media With Application to Unsaturated Flow

    DEFF Research Database (Denmark)

    Celia, Michael A.; Binning, Philip John

    1992-01-01

    A numerical algorithm for simulation of two-phase flow in porous media is presented. The algorithm is based on a modified Picard linearization of the governing equations of flow, coupled with a lumped finite element approximation in space and dynamic time step control. Numerical results indicate...... that the algorithm produces solutions that are essentially mass conservative and oscillation free, even in the presence of steep infiltrating fronts. When the algorithm is applied to the case of air and water flow in unsaturated soils, numerical results confirm the conditions under which Richards's equation is valid...... that describe two-phase flow in porous media....

  9. A mechanical erosion model for two-phase mass flows: Tackling a long standing dilemma of mass mobility

    Science.gov (United States)

    Fischer, Jan-Thomas; Pudasaini, Shiva P.; Mergili, Martin

    2017-04-01

    Landslides and debris flows can dramatically increase their volume and destructive potential, and become exceptionally mobile by entraining bed sediment and fluid. Additionally changes in flow bed by erosion-deposition mechanisms, and thus changes in the driving force components, play a critical role in debris flow dynamics. Usually erosion related geophysical mass flows are more mobile than without erosion. However, this fact has never been explained mechanically explicitly and unambiguously. In literature, it is mentioned that erosion results in shorter travel distance due to the energy lost in erosion, but it has also been argued that, e.g., due to the added mass, the debris travels longer distance. The dilemma of erosion and flow mobility however is, that no clear explanation and derivation exists to mechanically explicitly describe the state of mobility. To cope with these challenges a two-phase variably saturated erodible basal morphology is introduced and allows for the evolution of erosion-deposition-depths, incorporating the inherent physical process including momentum and rheological changes of the flowing mixture. By rigorous derivation, we show that appropriate incorporation of the mass and momentum productions or losses in conservative model formulation is essential for the physically correct and mathematically consistent description of erosion-entrainment-deposition processes. We show that mechanically deposition is the reversed process of erosion. We derive mechanically consistent closures for coefficients emerging in the erosion rate models. We prove that effectively reduced friction in erosion is equivalent to the momentum production. With this, we solve the long standing dilemma of mass mobility, and show that erosion enhances the mass flow mobility. The model appropriately captures the emergence and propagation of complex frontal surge dynamics associated with the frontal ambient-drag with erosion. Thus, the novel enhanced real two-phase model

  10. Magnetohydrodynamic and Slip Effects on the Flow and Mass Transfer over a Microcantilever-Based Sensor

    Directory of Open Access Journals (Sweden)

    M. B. Akgül

    2012-01-01

    Full Text Available Hydromagnetic flow and mass transfer of a viscous incompressible fluid over a microcantilever sensor surface are studied in the presence of slip flow. In addition, chemical reaction at the sensor surface is taken into account. The governing equations for the flow are reduced to a local nonsimilarity form. Resulting equations are solved numerically for various values of flow parameters. Effects of physical quantities on the velocity and concentration profiles are discussed in detail.

  11. Lanthanide-Coordinated Semiconducting Polymer Dots Used for Flow Cytometry and Mass Cytometry.

    Science.gov (United States)

    Wu, Xu; DeGottardi, Quinn; Wu, I-Che; Yu, Jiangbo; Wu, Li; Ye, Fangmao; Kuo, Chun-Ting; Kwok, William W; Chiu, Daniel T

    2017-11-20

    Simultaneous monitoring of biomarkers as well as single-cell analyses based on flow cytometry and mass cytometry are important for investigations of disease mechanisms, drug discovery, and signaling-network studies. Flow cytometry and mass cytometry are complementary to each other; however, probes that can satisfy all the requirements for these two advanced technologies are limited. In this study, we report a probe of lanthanide-coordinated semiconducting polymer dots (Pdots), which possess fluorescence and mass signals. We demonstrated the usage of this dual-functionality probe for both flow cytometry and mass cytometry in a mimetic cell mixture and human peripheral blood mononuclear cells as model systems. The probes not only offer high fluorescence signal for use in flow cytometry, but also show better performance in mass cytometry than the commercially available counterparts. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. State Token Petri Net modeling method for formal verification of computerized procedure including operator's interruptions of procedure execution flow

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yun Goo [Central Research Institute, Korea Hydro and Nuclear Power Co., LTD, Daejeon (Korea, Republic of); Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    2012-12-15

    The Computerized Procedure System (CPS) is one of the primary operating support systems in the digital Main Control Room. The CPS displays procedure on the computer screen in the form of a flow chart, and displays plant operating information along with procedure instructions. It also supports operator decision making by providing a system decision. A procedure flow should be correct and reliable, as an error would lead to operator misjudgement and inadequate control. In this paper we present a modeling for the CPS that enables formal verification based on Petri nets. The proposed State Token Petri Nets (STPN) also support modeling of a procedure flow that has various interruptions by the operator, according to the plant condition. STPN modeling is compared with Coloured Petri net when they are applied to Emergency Operating Computerized Procedure. A converting program for Computerized Procedure (CP) to STPN has been also developed. The formal verification and validation methods of CP with STPN increase the safety of a nuclear power plant and provide digital quality assurance means that are needed when the role and function of the CPS is increasing.

  13. Helium mass flow measurement in the International Fusion Superconducting Magnet Test Facility

    Energy Technology Data Exchange (ETDEWEB)

    Baylor, L.R.

    1986-08-01

    The measurement of helium mass flow in the International Fusion Superconducting Magnet Test Facility (IFSMTF) is an important aspect in the operation of the facility's cryogenic system. Data interpretation methods that lead to inaccurate results can cause severe difficulty in controlling the experimental superconducting coils being tested in the facility. This technical memorandum documents the methods of helium mass flow measurement used in the IFSMTF for all participants of the Large Coil Program and for other cryogenic experimentalists needing information on mass flow measurements. Examples of experimental data taken and calculations made are included to illustrate the applicability of the methods used.

  14. Heat and mass transfer and friction resistance of forced superheated vapor flow in tubes

    Energy Technology Data Exchange (ETDEWEB)

    Grebennikov, V.N.

    This paper describes a procedure used for calculating the heat/mass transfer and friction resistance of a forced superheated vapor flow in tubes of separators-vapor superheaters and direct-flow vapor generators under equilibrium conditions and also under conditions where the flow is in a thermodynamic nonequilibrium state. Using the Reynolds analogy-based concept, an analysis of the process is carried out. Recommendations for calculating the heat/mass transfer and the hydraulic characteristics of vapor- superheating sections in separators-vapor superheaters and direct-flow vapor generators are made.

  15. Flow-dependent mass transfer may trigger endothelial signaling cascades.

    Science.gov (United States)

    Vandrangi, Prashanthi; Sosa, Martha; Shyy, John Y-J; Rodgers, Victor G J

    2012-01-01

    It is well known that fluid mechanical forces directly impact endothelial signaling pathways. But while this general observation is clear, less apparent are the underlying mechanisms that initiate these critical signaling processes. This is because fluid mechanical forces can offer a direct mechanical input to possible mechanotransducers as well as alter critical mass transport characteristics (i.e., concentration gradients) of a host of chemical stimuli present in the blood stream. However, it has recently been accepted that mechanotransduction (direct mechanical force input), and not mass transfer, is the fundamental mechanism for many hemodynamic force-modulated endothelial signaling pathways and their downstream gene products. This conclusion has been largely based, indirectly, on accepted criteria that correlate signaling behavior and shear rate and shear stress, relative to changes in viscosity. However, in this work, we investigate the negative control for these criteria. Here we computationally and experimentally subject mass-transfer limited systems, independent of mechanotransduction, to the purported criteria. The results showed that the negative control (mass-transfer limited system) produced the same trends that have been used to identify mechanotransduction-dominant systems. Thus, the widely used viscosity-related shear stress and shear rate criteria are insufficient in determining mechanotransduction-dominant systems. Thus, research should continue to consider the importance of mass transfer in triggering signaling cascades.

  16. A flow cytometry-based screen of nuclear envelope transmembrane proteins identifies NET4/Tmem53 as involved in stress-dependent cell cycle withdrawal.

    Directory of Open Access Journals (Sweden)

    Nadia Korfali

    2011-04-01

    Full Text Available Disruption of cell cycle regulation is one mechanism proposed for how nuclear envelope protein mutation can cause disease. Thus far only a few nuclear envelope proteins have been tested/found to affect cell cycle progression: to identify others, 39 novel nuclear envelope transmembrane proteins were screened for their ability to alter flow cytometry cell cycle/DNA content profiles when exogenously expressed. Eight had notable effects with seven increasing and one decreasing the 4N:2N ratio. We subsequently focused on NET4/Tmem53 that lost its effects in p53(-/- cells and retinoblastoma protein-deficient cells. NET4/TMEM53 knockdown by siRNA altered flow cytometry cell cycle/DNA content profiles in a similar way as overexpression. NET4/TMEM53 knockdown did not affect total retinoblastoma protein levels, unlike nuclear envelope-associated proteins Lamin A and LAP2α. However, a decrease in phosphorylated retinoblastoma protein was observed along with a doubling of p53 levels and a 7-fold increase in p21. Consequently cells withdrew from the cell cycle, which was confirmed in MRC5 cells by a drop in the percentage of cells expressing Ki-67 antigen and an increase in the number of cells stained for ß-galactosidase. The ß-galactosidase upregulation suggests that cells become prematurely senescent. Finally, the changes in retinoblastoma protein, p53, and p21 resulting from loss of NET4/Tmem53 were dependent upon active p38 MAP kinase. The finding that roughly a fifth of nuclear envelope transmembrane proteins screened yielded alterations in flow cytometry cell cycle/DNA content profiles suggests a much greater influence of the nuclear envelope on the cell cycle than is widely held.

  17. Integrated pressure sensing using capacitive Coriolis mass flow sensors

    NARCIS (Netherlands)

    Alveringh, Dennis; Wiegerink, Remco J.; Lötters, Joost Conrad

    2017-01-01

    The cross-sectional shape of microchannels is, dependent on the fabrication method, never perfectly circular. Consequently, the channels deform with the pressure, which is a non-ideal effect in flow sensors, but may be used for pressure sensing. Multiple suspended channels with different lengths

  18. Fiber Optic Mass Flow Gauge for Liquid Cryogenic Fuel Facilities Monitoring and Control Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This SBIR Phase I proposal describes a fiber optic mass flow gauge that will aid in managing liquid hydrogen and oxygen fuel storage and transport. The increasing...

  19. Differentiating organic and conventional sage by chromatographic and mass spectrometry flow-injection fingerprints

    Science.gov (United States)

    High performance liquid chromatography (UPLC) and flow injection electrospray ionization with ion trap mass spectrometry (FIMS) fingerprints combined with the principal component analysis (PCA) were examined for their potential in differentiating commercial organic and conventional sage samples. The...

  20. FEFLOW finite element modeling of flow, mass and heat transport in porous and fractured media

    CERN Document Server

    Diersch, Hans-Jörg G

    2013-01-01

    Placing advanced theoretical and numerical methods in the hands of modeling practitioners and scientists, this book explores the FEFLOW system for solving flow, mass and heat transport processes in porous and fractured media. Offers applications and exercises.

  1. Effect of Reynolds number on flow and mass transfer characteristics of a 90 degree elbow

    Science.gov (United States)

    Fujisawa, Nobuyuki; Ikarashi, Yuya; Yamagata, Takayuki; Taguchi, Syoichi

    2016-11-01

    The flow and mass transfer characteristics of a 90 degree elbow was studied experimentally by using the mass transfer measurement by plaster dissolution method, the surface flow visualization by oil film method and stereo PIV measurement. The experiments are carried out in a water tunnel of a circular pipe of 56mm in diameter with a working fluid of water. The Reynolds number was varied from 30000 to 200000. The experimental result indicated the change of the mass transfer coefficient distribution in the elbow with increasing the Reynolds number. This phenomenon is further examined by the surface flow visualization and measurement of secondary flow pattern in the elbow, and the results showed the suggested change of the secondary flow pattern in the elbow with increasing the Reynolds numbers.

  2. Fluid-Structure Interaction Effects on Mass Flow Rates in Solid Rocket Motors

    Science.gov (United States)

    2015-09-02

    in Solid Rocket Motors 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) William Harrigan 5d. PROJECT NUMBER...Determination of mass flow rate in a solid rocket motor is critical in the design of a new motor due to its effect on the thrust produced. Fluid...mass flow rates. The FSI analyses with two‐way coupling provided a more accurate assessment of solid rocket motor internal ballistics. 15. SUBJECT

  3. Boundary Layer Flows in Porous Media with Lateral Mass Flux

    DEFF Research Database (Denmark)

    Nemati, H; H, Bararnia; Noori, F

    2015-01-01

    Solutions for free convection boundary layers on a heated vertical plate with lateral mass flux embedded in a saturated porous medium are presented using the Homotopy Analysis Method and Shooting Numerical Method. Homotopy Analysis Method yields an analytic solution in the form of a rapidly...

  4. Contributions to flow techniques and mass spectrometry in water analysis

    OpenAIRE

    Santos, Inês Carvalho dos

    2015-01-01

    In this thesis, the use of different flow systems was exploited along with the use of different detection techniques for the development of simple, robust, and automated analytical procedures. With the purpose to perform in-line sample handling and pretreatment operations, different separation units were used. The main target for these methods was waters samples. The first procedure was based on a sequential injection analysis (SIA) system for carbon speciation (alkalinity, dis...

  5. Impact of Heat and Mass Transfer on MHD Oscillatory Flow of Jeffery ...

    African Journals Online (AJOL)

    The objective of this paper is to study Dufour, Soret and thermal conductivity on unsteady heat and mass transfer of magneto hydrodynamic (MHD) oscillatory flow of Jeffery fluid through a porous medium in a channel. The partial differential equations governing the flow have been solved numerically using semi-implicit ...

  6. Mass flow measurement of granular materials in aerial application. Part 2: Experimental model validation

    NARCIS (Netherlands)

    Grift, T.E.; Walker, J.T.; Hofstee, J.W.

    2001-01-01

    A system was developed to measure the mass flow of granular fertilizer material in aerial spreader ducts. The flow process was regarded as the sequential passage of clusters containing multiple particles with varying diameters. An optical sensor was used to measure the cluster lengths on the fly. In

  7. Modeling, design, fabrication and characterization of a micro Coriolis mass flow sensor

    NARCIS (Netherlands)

    Haneveld, J.; Lammerink, Theodorus S.J.; de Boer, Meint J.; Sanders, Remco G.P.; Mehendale, A.; Lötters, Joost Conrad; Lotters, Joost Conrad; Dijkstra, Marcel; Wiegerink, Remco J.

    2010-01-01

    This paper discusses the modeling, design and realization of micromachined Coriolis mass flow sensors. A lumped element model is used to analyze and predict the sensor performance. The model is used to design a sensor for a flow range of 0–1.2 g h−1 with a maximum pressure drop of 1 bar. The sensor

  8. On Fermion Masses, Gradient Flows and Potential in Supersymmetric Theories

    CERN Document Server

    D'Auria, R

    2001-01-01

    In any low energy effective supergravity theory general formulae exist which allow one to discuss fermion masses, the scalar potential and breaking of symmetries in a model independent set up. A particular role in this discussion is played by Killing vectors and Killing prepotentials. We outline these relations in general and specify then in the context of N=1 and N=2 supergravities in four dimensions. Useful relations of gauged quaternionic geometry underlying hypermultiplets dynamics are discussed.

  9. A review of mass and energy flow through a lava flow system: insights provided from a non-equilibrium perspective

    Science.gov (United States)

    Tarquini, Simone

    2017-08-01

    A simple formula relates lava discharge rate to the heat radiated per unit time from the surface of active lava flows (the "thermal proxy"). Although widely used, the physical basis of this proxy is still debated. In the present contribution, lava flows are approached as open, dissipative systems that, under favorable conditions, can attain a non-equilibrium stationary state. In this system framework, the onset, growth, and demise of lava flow units can be explained as a self-organization phenomenon characterized by a given temporal frequency defined by the average life span of active lava flow units. Here, I review empirical, physical, and experimental models designed to understand and link the flow of mass and energy through a lava flow system, as well as measurements and observations that support a "real-world" view. I set up two systems: active lava flow system (or ALFS) for flowing, fluid lava and a lava deposit system for solidified, cooling lava. The review highlights surprising similarities between lava flows and electric currents, which typically work under stationary conditions. An electric current propagates almost instantaneously through an existing circuit, following the Kirchhoff law (a least dissipation principle). Flowing lavas, in contrast, build up a slow-motion "lava circuit" over days, weeks, or months by following a gravity-driven path down the steepest slopes. Attainment of a steady-state condition is hampered (and the classic thermal proxy does not hold) if the supply stops before completion of the "lava circuit." Although gravity determines initial flow path and extension, the least dissipation principle means that subsequent evolution of mature portions of the active lava flow system is controlled by increasingly insulated conditions.

  10. Smooth information flow in temperature climate network reflects mass transport

    Czech Academy of Sciences Publication Activity Database

    Hlinka, Jaroslav; Jajcay, Nikola; Hartman, David; Paluš, Milan

    2017-01-01

    Roč. 27, č. 3 (2017), č. článku 035811. ISSN 1054-1500 R&D Projects: GA ČR GCP103/11/J068; GA MŠk LH14001 Institutional support: RVO:67985807 Keywords : directed network * causal network * Granger causality * climate network * information flow * temperature network Subject RIV: IN - Informatics, Computer Science OBOR OECD: Computer sciences, information science, bioinformathics (hardware development to be 2.2, social aspect to be 5.8) Impact factor: 2.283, year: 2016

  11. Mass flows of endocrine disruptors in the Glatt River during varying weather conditions

    Energy Technology Data Exchange (ETDEWEB)

    Jonkers, Niels; Kohler, Hans-Peter E.; Dammshaeuser, Anna [Eawag, Swiss Federal Institute of Aquatic Science and Technology, 8600 Duebendorf (Switzerland); Giger, Walter [Eawag, Swiss Federal Institute of Aquatic Science and Technology, 8600 Duebendorf (Switzerland)], E-mail: giger@eawag.ch

    2009-03-15

    This study focused on the occurrence and behaviour in wastewater and surface waters of several phenolic endocrine disrupting compounds (EDCs) including parabens, alkylphenolic compounds, phenylphenol (PhP) and bisphenol A (BPA). Analytical procedures using solid-phase-extraction and LC-MS/MS techniques were applied to samples of influents and effluents of wastewater treatment plants (WWTPs) discharging into the Glatt River (Switzerland) as well as to river water samples. A mass flow analysis provided insight into the main sources and the fate of these contaminants during different weather conditions. Concentrations in influents were in the low {mu}g/L range for most analytes. Removal of parabens in the WWTPs was mostly above 99%. Nonylphenol polyethoxylates (A{sub 9}PEO) removal amounted to 98%, but in some cases nonylphenoxy acetic acid (A{sub 9}PEC) or nonylphenols (NP) were formed. In effluents, concentrations were highest for the A{sub 9}PEC, A{sub 9}PEO and NP. Concentrations in river water were in the high ng/L range for alkylphenolic compounds and in the low ng/L range for BPA, PhP and the parabens. During the sampling period, in which several rain events occurred, both water flows and mass flows varied strongly. Mass flows in WWTP effluents and in the river increased with increasing water flows for most compounds indicating that higher water flows do not lead necessarily to a proportional dilution of the pollutants. Throughout the low water flow period, mass flows predicted from the known inputs were similar to the actual mass flows at the end of the river for most analytes. For none of the EDCs, significant in-stream removal could be observed. In the periods with high water flows, mass flows in the river were much higher than can be explained by the initially defined sources. Discharge of untreated wastewater influent into the river was assessed as an additional source. Adding this source improved the mass balance for some, but not all of the analytes

  12. A compact micro Coriolis mass flow sensor with flow bypass for a monopropellant micro propulsion system

    NARCIS (Netherlands)

    Groenesteijn, Jarno; Dijkstra, Marcel; Lammerink, Theodorus S.J.; Lötters, Joost Conrad; Wiegerink, Remco J.

    2014-01-01

    We have designed, fabricated and tested a micromachined Coriolis flow sensor for the measurement of hydrazine (N2H4) propellant flow in a micro chemical propulsion system (uCPS). The sensor will be used for measurement and characterization of the uCPS in a simulated space vacuum environment. To

  13. Estimating kinetic mass transfer by resting-period measurements in flow-interruption tracer tests.

    Science.gov (United States)

    Gong, R; Lu, C; Wu, W-M; Cheng, H; Gu, B; Watson, D B; Criddle, C S; Kitanidis, P K; Brooks, S C; Jardine, P M; Luo, J

    2010-09-20

    Flow-interruption tracer test is an effective approach to identify kinetic mass transfer processes for solute transport in subsurface media. By switching well pumping and resting, one may alter the dominant transport mechanism and generate special concentration patterns for identifying kinetic mass transfer processes. In the present research, we conducted three-phase (i.e., pumping, resting, and pumping) field-scale flow-interruption tracer tests using a conservative tracer bromide in a multiple-well system installed at the US Department of Energy Site, Oak Ridge, TN. A novel modeling approach based on the resting-period measurements was developed to estimate the mass transfer parameters. This approach completely relied on the measured breakthrough curves without requiring detailed aquifer characterization and solving transport equations in nonuniform, transient flow fields. Additional measurements, including hydraulic heads and tracer concentrations in large pumping wells, were taken to justify the assumption that mass transfer processes dominated concentration change during resting periods. The developed approach can be conveniently applied to any linear mass transfer model. Both first-order and multirate mass transfer models were applied to analyze the breakthrough curves at various monitoring wells. The multirate mass transfer model was capable of jointly fitting breakthrough curve behavior, showing the effectiveness and flexibility for incorporating aquifer heterogeneity and scale effects in upscaling effective mass transfer models. Copyright (c) 2010 Elsevier B.V. All rights reserved.

  14. Characterization of branched ultrahigh molar mass polymers by asymmetrical flow field-flow fractionation and size exclusion chromatography.

    Science.gov (United States)

    Otte, T; Pasch, H; Macko, T; Brüll, R; Stadler, F J; Kaschta, J; Becker, F; Buback, M

    2011-07-08

    The molar mass distribution (MMD) of synthetic polymers is frequently analyzed by size exclusion chromatography (SEC) coupled to multi angle light scattering (MALS) detection. For ultrahigh molar mass (UHM) or branched polymers this method is not sufficient, because shear degradation and abnormal elution effects falsify the calculated molar mass distribution and information on branching. High temperatures above 130 °C have to be applied for dissolution and separation of semi-crystalline materials like polyolefins which requires special hardware setups. Asymmetrical flow field-flow fractionation (AF4) offers the possibility to overcome some of the main problems of SEC due to the absence of an obstructing porous stationary phase. The SEC-separation mainly depends on the pore size distribution of the used column set. The analyte molecules can enter the pores of the stationary phase in dependence on their hydrodynamic volume. The archived separation is a result of the retention time of the analyte species inside SEC-column which depends on the accessibility of the pores, the residence time inside the pores and the diffusion ability of the analyte molecules. The elution order in SEC is typically from low to high hydrodynamic volume. On the contrary AF4 separates according to the diffusion coefficient of the analyte molecules as long as the chosen conditions support the normal FFF-separation mechanism. The separation takes place in an empty channel and is caused by a cross-flow field perpendicular to the solvent flow. The analyte molecules will arrange in different channel heights depending on the diffusion coefficients. The parabolic-shaped flow profile inside the channel leads to different elution velocities. The species with low hydrodynamic volume will elute first while the species with high hydrodynamic volume elute later. The AF4 can be performed at ambient or high temperature (AT-/HT-AF4). We have analyzed one low molar mass polyethylene sample and a number of

  15. Quantification of the influence of external vibrations on the measurement error of a coriolis mass-flow meter

    NARCIS (Netherlands)

    van de Ridder, Bert; Hakvoort, Wouter; van Dijk, Johannes; Lötters, Joost Conrad; de Boer, Andries

    2014-01-01

    In this paper the influence of external vibrations on the measurement value of a Coriolis mass-flow meter (CMFM) for low flows is investigated and quantified. Model results are compared with experimental results to improve the knowledge on how external vibrations affect the mass-flow measurement

  16. Assessment of diffuse heavy metal pollution, mass transfer and flows at a gold mining site within the Lake Baikal Basin

    Science.gov (United States)

    Thorslund, Josefin; Jarsjö, Jerker; Chalov, Sergey; Belozerova, Ekaterina

    2013-04-01

    The flux, transfer and accumulation of heavy metals in aquatic systems pose a potential danger to the ecosystem at various scales, due to their toxicity and non-destroyable nature. Mining and ore excavation can cause heavy metal pollution of both local and downstream water systems, including groundwater sources. The Zaamar Goldfield, located in the upper Lake Baikal Basin (Mongolia), is an example of an extensive gold mining site, which significantly contributes to downstream increases in riverine concentrations of heavy metals, both in dissolved and suspended phases. However, the placer mining area is large and the pollution is diffuse by nature. Due to lack of detailed monitoring, it is unclear how the pollution is transported from the mine tailings to the river. There are several potentially important pathways, such as mobilization of bank sediments, in-stream dissolution from metal-rich suspended/bottom sediments, and through polluted groundwater. We here aim at estimating diffuse mass flows from the source zone to the river, in addition to riverine mass flows. Additionally, the behaviour of heavy metals under varying geochemical conditions (such as pH) is investigated, to be able to understand the solubility of various heavy metals and their partitioning between particulate and dissolved phase. We base our analysis on on-site hydrogeochemical field campaigns. These include concentration measurements in different media (groundwater, waste ponds, ditches, river water, suspended sediments, and bottom sediments). Runoff estimations from the site as well as solubility calculations are also main analytical methods. Results show a net increase in both dissolved and suspended riverine mass flows over the Zaamar site. Concentrations in the deep groundwater system are generally in the same order of magnitude as river concentrations, which suggest important inputs of dissolved heavy metals to the river through groundwater flows. The input of dissolved concentrations are

  17. Generalized derivation of the added-mass and circulatory forces for viscous flows

    Science.gov (United States)

    Limacher, Eric; Morton, Chris; Wood, David

    2018-01-01

    The concept of added mass arises from potential flow analysis and is associated with the acceleration of a body in an inviscid irrotational fluid. When shed vorticity is modeled as vortex singularities embedded in this irrotational flow, the associated force can be superimposed onto the added-mass force due to the linearity of the governing Laplace equation. This decomposition of force into added-mass and circulatory components remains common in modern aerodynamic models, but its applicability to viscous separated flows remains unclear. The present work addresses this knowledge gap by presenting a generalized derivation of the added-mass and circulatory force decomposition which is valid for a body of arbitrary shape in an unbounded, incompressible fluid domain, in both two and three dimensions, undergoing arbitrary motions amid continuous distributions of vorticity. From the general expression, the classical added-mass force is rederived for well-known canonical cases and is seen to be additive to the circulatory force for any flow. The formulation is shown to be equivalent to existing theoretical work under the specific conditions and assumptions of previous studies. It is also validated using a numerical simulation of a pitching plate in a steady freestream flow, conducted by Wang and Eldredge [Theor. Comput. Fluid Dyn. 27, 577 (2013), 10.1007/s00162-012-0279-5]. In response to persistent confusion in the literature, a discussion of the most appropriate physical interpretation of added mass is included, informed by inspection of the derived equations. The added-mass force is seen to account for the dynamic effect of near-body vorticity and is not (as is commonly claimed) associated with the acceleration of near-body fluid which "must" somehow move with the body. Various other consequences of the derivation are discussed, including a concept which has been labeled the conservation of image-vorticity impulse.

  18. Does Body Mass Index Influence Behavioral Regulations, Dispositional Flow and Social Physique Anxiety in Exercise Setting?

    OpenAIRE

    Gözde Ersöz, Ersin Altiparmak, F. Hülya Aşçı

    2016-01-01

    The purpose of this study was to examine differences in behavioral regulations, dispositional flow, social physique anxiety of exercisers in terms of body mass index (BMI). 782 university students participated in this study. Dispositional Flow State Scale-2, Behavioral Regulations in Exercise Questionnaire-2, Social Physique Anxiety Scale and Physical Activity Stages of Change Questionnaire were administered to participants. After controlling for gender, analysis indicated significant differe...

  19. Impact of physical incompatibility on drug mass flow rates: example of furosemide-midazolam incompatibility

    Science.gov (United States)

    2012-01-01

    Background Patients in intensive care units receive many drugs simultaneously but through limited venous accesses. Several intravenous therapies have to be administered through the same catheter, thus increasing the risk of physicochemical incompatibility. The purpose of this work was to assess and to quantify the impact of physical incompatibility on the mass flow rates of drugs infused simultaneously to the patient, through an in vitro study. Methods Furosemide-midazolam incompatibility was used to assess the impact of physical incompatibility on drug mass flow rates. Furosemide, midazolam, and saline were simultaneously infused. A filter was added at the end of the infusion line to retain visible particles. Two infusion conditions were tested with and without visible particles. A partial least square method on UV spectra was used to determine simultaneously the concentrations of the two drugs at the egress of the terminal extension line. The drug mass flow rate (expressed as mg/h) was calculated as the product of drug concentration versus total flow rate. Observed/theoretical mass flow rate ratios for each drug (%) were determined per infusion condition. Results Even in the absence of visible particles, precipitation of furosemide led to a drug loss estimated at between 10% and 15%. Furosemide is more impacted by interaction because the pH of the mixture is acid and this form is poorly soluble in an aqueous solution. Conclusions Physical incompatibility between furosemide and midazolam leads to a significant reduction in drug delivered to the patient and may result in treatment failure. PMID:22794308

  20. Reactor mass flow data base prepared for the nonproliferation alternative systems assessment program

    Energy Technology Data Exchange (ETDEWEB)

    Primm III, R.T.C

    1981-02-01

    This report presents charge and discharge mass flow data for reactors judged to have received sufficient technical development to enable them to be demonstrated or commercially available by the year 2000. Brief descriptions of the reactors and fuel cycles evaluated are presented. A discussion of the neutronics methods used to produce the mass flow data is provided. Detailed charge and discharge fuel isotopics are presented. U/sub 3/O/sub 8/, separative work, and fissile material requirements are computed and provided for each fuel cycle.

  1. Thermal diffusion effects on free convection and mass transfer flow for an infinite vertical plate

    CERN Document Server

    Abdel-Khalek, M M

    2003-01-01

    A theoretical study is performed to examine the effects of thermal diffusion on free convection and mass transfer flow for an infinite vertical plate. The governing equations for the fluid flow and the heat transfer are solved subject to the relevant boundary conditions. A perturbation technique is used to obtain expressions for the velocity field and skin friction. An analysis of the effects of the parameters on the concentration, velocity and temperature profiles as well as skin friction and the rate of mass and heat transfer is done with the aid of graphs.

  2. Influence of relative air/water flow velocity on oxygen mass transfer in gravity sewers.

    Science.gov (United States)

    Carrera, Lucie; Springer, Fanny; Lipeme-Kouyi, Gislain; Buffiere, Pierre

    2017-04-01

    Problems related to hydrogen sulfide may be serious for both network stakeholders and the public in terms of health, sustainability of the sewer structure and urban comfort. H2S emission models are generally theoretical and simplified in terms of environmental conditions. Although air transport characteristics in sewers must play a role in the fate of hydrogen sulfide, only a limited number of studies have investigated this issue. The aim of this study was to better understand H2S liquid to gas transfer by highlighting the link between the mass transfer coefficient and the turbulence in the air flow and the water flow. For experimental safety reasons, O2 was taken as a model compound. The oxygen mass transfer coefficients were obtained using a mass balance in plug flow. The mass transfer coefficient was not impacted by the range of the interface air-flow velocity values tested (0.55-2.28 m·s-1) or the water velocity values (0.06-0.55 m·s-1). Using the ratio between kL,O2 to kL,H2S, the H2S mass transfer behavior in a gravity pipe in the same hydraulic conditions can be predicted.

  3. Bayesian inference in mass flow simulations - from back calculation to prediction

    Science.gov (United States)

    Kofler, Andreas; Fischer, Jan-Thomas; Hellweger, Valentin; Huber, Andreas; Mergili, Martin; Pudasaini, Shiva; Fellin, Wolfgang; Oberguggenberger, Michael

    2017-04-01

    Mass flow simulations are an integral part of hazard assessment. Determining the hazard potential requires a multidisciplinary approach, including different scientific fields such as geomorphology, meteorology, physics, civil engineering and mathematics. An important task in snow avalanche simulation is to predict process intensities (runout, flow velocity and depth, ...). The application of probabilistic methods allows one to develop a comprehensive simulation concept, ranging from back to forward calculation and finally to prediction of mass flow events. In this context optimized parameter sets for the used simulation model or intensities of the modeled mass flow process (e.g. runout distances) are represented by probability distributions. Existing deterministic flow models, in particular with respect to snow avalanche dynamics, contain several parameters (e.g. friction). Some of these parameters are more conceptual than physical and their direct measurement in the field is hardly possible. Hence, parameters have to be optimized by matching simulation results to field observations. This inverse problem can be solved by a Bayesian approach (Markov chain Monte Carlo). The optimization process yields parameter distributions, that can be utilized for probabilistic reconstruction and prediction of avalanche events. Arising challenges include the limited amount of observations, correlations appearing in model parameters or observed avalanche characteristics (e.g. velocity and runout) and the accurate handling of ensemble simulations, always taking into account the related uncertainties. Here we present an operational Bayesian simulation framework with r.avaflow, the open source GIS simulation model for granular avalanches and debris flows.

  4. Modelling gas-liquid flow and local mass transfer in stirred tanks

    OpenAIRE

    Moilanen, Pasi

    2009-01-01

    This doctorial thesis offers a guideline for modelling gas-liquid flow in stirred tanks with computational fluid dynamics (CFD). Particularly the effect of varying physical properties and industrial operating conditions is highlighted. The most important thing in modelling mass transfer in stirred vessels is the accurate prediction of local bubble size. Population balances for bubbles are needed for accurate description of the local mass transfer rate. There are many pitfalls in gas-liquid mo...

  5. Analysis of the contribution of sedimentation to bacterial mass transport in a parallel plate flow chamber.

    Science.gov (United States)

    Li, Jiuyi; Busscher, Henk J; Norde, Willem; Sjollema, Jelmer

    2011-05-01

    In order to investigate bacterium-substratum interactions, understanding of bacterial mass transport is necessary. Comparisons of experimentally observed initial deposition rates with mass transport rates in parallel-plate-flow-chambers (PPFC) predicted by convective-diffusion yielded deposition efficiencies above unity, despite electrostatic repulsion. It is hypothesized that sedimentation is the major mass transport mechanism in a PPFC. The contribution of sedimentation to the mass transport in a PPFC was experimentally investigated by introducing a novel microscopy-based method. First, height-dependent bacterial concentrations were measured at different times and flow rates and used to calculate bacterial sedimentation velocities. For Staphylococcus aureus ATCC 12600, a sedimentation velocity of 240 μm h(-1) was obtained. Therewith, sedimentation appeared as the predominant contribution to mass transport in a PPFC. Also in the current study, deposition efficiencies of S. aureus ATCC 12600 with respect to the Smoluchowski-Levich solution of the convective-diffusion equation were four-to-five fold higher than unity. However, calculation of deposition efficiencies with respect to sedimentation were below unity and decreased from 0.78 to 0.36 when flow rates increased from 0.017 to 0.33 cm(3) s(-1). The proposed analysis of bacterial mass transport processes is simple, does not require additional equipment and yields a more reasonable interpretation of bacterial deposition in a PPFC. Copyright © 2010 Elsevier B.V. All rights reserved.

  6. Evaluating renewable natural resources flow and net primary productivity with a GIS-Emergy approach: A case study of Hokkaido, Japan.

    Science.gov (United States)

    Wang, Chengdong; Zhang, Shenyan; Yan, Wanglin; Wang, Renqing; Liu, Jian; Wang, Yutao

    2016-11-18

    Renewable natural resources, such as solar radiation, rainfall, wind, and geothermal heat, together with ecosystem services, provide the elementary supports for the sustainable development of human society. To improve regional sustainability, we studied the spatial distributions and quantities of renewable natural resources and net primary productivity (NPP) in Hokkaido, which is the second largest island of Japan. With the help of Geographic Information System (GIS) software, distribution maps for each type of renewable natural resource were generated by kriging interpolation based on statistical records. A composite map of the flow of all types of renewable natural resources was also generated by map layer overlapping. Additionally, we utilized emergy analysis to convert each renewable flow with different attributes into a unified unit (i.e., solar equivalent joules [sej]). As a result, the spatial distributions of the flow of renewable natural resources of the Hokkaido region are presented in the form of thematic emergy maps. Thus, the areas with higher renewable emergy can be easily visualized and identified. The dominant renewable flow in certain areas can also be directly distinguished. The results can provide useful information for regional sustainable development, environmental conservation and ecological management.

  7. Evaluating renewable natural resources flow and net primary productivity with a GIS-Emergy approach: A case study of Hokkaido, Japan

    Science.gov (United States)

    Wang, Chengdong; Zhang, Shenyan; Yan, Wanglin; Wang, Renqing; Liu, Jian; Wang, Yutao

    2016-11-01

    Renewable natural resources, such as solar radiation, rainfall, wind, and geothermal heat, together with ecosystem services, provide the elementary supports for the sustainable development of human society. To improve regional sustainability, we studied the spatial distributions and quantities of renewable natural resources and net primary productivity (NPP) in Hokkaido, which is the second largest island of Japan. With the help of Geographic Information System (GIS) software, distribution maps for each type of renewable natural resource were generated by kriging interpolation based on statistical records. A composite map of the flow of all types of renewable natural resources was also generated by map layer overlapping. Additionally, we utilized emergy analysis to convert each renewable flow with different attributes into a unified unit (i.e., solar equivalent joules [sej]). As a result, the spatial distributions of the flow of renewable natural resources of the Hokkaido region are presented in the form of thematic emergy maps. Thus, the areas with higher renewable emergy can be easily visualized and identified. The dominant renewable flow in certain areas can also be directly distinguished. The results can provide useful information for regional sustainable development, environmental conservation and ecological management.

  8. Effects of mass transfer on MHD flow of casson fluid with chemical reaction and suction

    Directory of Open Access Journals (Sweden)

    S. A. Shehzad

    2013-03-01

    Full Text Available Effect of mass transfer in the magnetohydrodynamic flow of a Casson fluid over a porous stretching sheet is addressed in the presence of a chemical reaction. A series solution for the resulting nonlinear flow is computed. The skin friction coefficient and local Sherwood number are analyzed through numerical values for various parameters of interest. The velocity and concentration fields are illustrated for several pertinent flow parameters. We observed that the Casson parameter and Hartman number have similar effects on the velocity in a qualitative sense. We further analyzed that the concentration profile decreases rapidly in comparison to the fluid velocity when we increased the values of the suction parameter.

  9. Liquid-liquid Slug Flow in a Microchannel Reactor and its Mass Transfer Properties - A Review

    Directory of Open Access Journals (Sweden)

    Rahul Antony

    2014-10-01

    Full Text Available Mass transfer is a basic phenomenon behind many processes like reaction, absorption, extraction etc. Mass transfer plays a significant role in microfluidic systems where the chemical / biological process systems are shrinkened down to a micro scale. Micro reactor system, with its high compatibility and performance, gains a wide interest among the researchers in the recent years. Micro structured reac-tors holds advantages over the conventional types in chemical processes. The significance of micro re-actor not limited to its scalability but to energy efficiency, on-site / on-demand production, reliability, safety, highly controlled outputs, etc. Liquid-liquid two phase reaction in a microreactor system is highly demandable when both reactants are liquids or when air medium cannot be suitable. This arti-cle overviews various liquid-liquid flow regimes in a microchannel. Discussions on the hydrodynamics of flow in micro scale are made. Considering the importance of mass transfer in liquid-liquid systems and the advantage of slug regime over other regimes, the article focuses especially on the mass trans-fer between two liquid phases in slug flow and the details of experimental studies carried out in this area. The advantages of slug flow over other flow regimes in micro structured reactor applications are showcased. © 2014 BCREC UNDIP. All rights reservedReceived: 31st May 2014; Revised: 6th August 2014; Accepted: 14th August 2014How to Cite: Antony, R., Giri Nandagopal, M.S., Sreekumar, N., Rangabhashiyam, S., Selvaraju, N. (2014. Liquid-liquid Slug Flow in a Microchannel Reactor and its Mass Transfer Properties - A Review. Bulletin of Chemical Reaction Engineering & Catalysis,9(3: 207-223. (doi:10.9767/bcrec.9.3.6977.207-223Permalink/DOI: http://dx.doi.org/10.9767/bcrec.9.3.6977.207-223

  10. Energy saving for OpenFlow switch on the NetFPGA platform based on queue engineering.

    Science.gov (United States)

    Vu, Tran Hoang; Luc, Vu Cong; Quan, Nguyen Trung; Thanh, Nguyen Huu; Nam, Pham Ngoc

    2015-01-01

    Data centers play an important role in our daily activities. The increasing demand on data centers in both scale and size has led to huge energy consumption that rises the cost of data centers. Besides, environmental impacts also increase considerably due to a large amount of carbon emissions. In this paper, we present a design aimed at green networking by reducing the power consumption for routers and switches. Firstly, we design the Balance Switch on the NetFPGA platform to save consumed energy based on Queue Engineering. Secondly, we design the test-bed system to precisely measure the consumed energy of our switches. Experimental results show that energy saving of our switches is about 30% - 35% of power consumption according to variation of input traffic compared with normal Openflow Switch. Finally, we describe performance evaluations.

  11. Numerical calculations of mass transfer flow in semi-detached binary systems. [of stars

    Science.gov (United States)

    Edwards, D. A.; Pringle, J. E.

    1987-01-01

    The details of the mass transfer flow near the inner Lagrangian point in a semidetached binary system are numerically calculated. A polytropic equation of state with n = 3/2 is used. The dependence of the mass transfer rate on the degree to which the star overfills its Roche lobe is calculated, and good agreement with previous analytic estimates is found. The variation of mass transfer rate which occurs if the binary system has a small eccentricity is calculated and is used to cast doubt on the model for superhumps in dwarf novae proposed by Papaloizou and Pringle (1979).

  12. Estimation of added-mass and damping coefficients of a tethered spherical float using potential flow theory

    Digital Repository Service at National Institute of Oceanography (India)

    Vethamony, P.; Chandramohan, P.; Sastry, J.S.; Narasimhan, S.

    flow theory. Variations of added-mass and damping coefficients with respect to water depth, wave period and float size have been obtained. Variations of added-mass and damping coefficients with wave period show that these hydrodynamic coefficients...

  13. Energy of vanishing flow in heavy-ion collisions: Role of mass ...

    Indian Academy of Sciences (India)

    Energy of vanishing flow in heavy-ion collisions: Role of mass asymmetry of a reaction. VARINDERJIT KAUR and SUNEEL KUMAR. ∗. School of Physics and Material Science, Thapar University, Patiala 147 004, India. ∗. Corresponding author. E-mail: suneel.kumar@thapar.edu. MS received 28 April 2011; revised 4 July ...

  14. On computations for thermal radiation in MHD channel flow with heat and mass transfer.

    Science.gov (United States)

    Hayat, T; Awais, M; Alsaedi, A; Safdar, Ambreen

    2014-01-01

    This study examines the simultaneous effects of heat and mass transfer on the three-dimensional boundary layer flow of viscous fluid between two infinite parallel plates. Magnetohydrodynamic (MHD) and thermal radiation effects are present. The governing problems are first modeled and then solved by homotopy analysis method (HAM). Influence of several embedded parameters on the velocity, concentration and temperature fields are described.

  15. Differentiating organic from conventional peppermints using chromatographic and flow-injection mass spectrometric (FIMS) fingerprints

    Science.gov (United States)

    High performance liquid chromatography (HPLC) and flow-injection mass spectrometric (FIMS) fingerprinting techniques were tested for their potential in differentiating organic and conventional peppermint samples. Ten organic and ten conventional peppermint samples were examined using HPLC-UV and FI...

  16. Determination of vibration frequency depending on abrasive mass flow rate during abrasive water jet cutting

    Czech Academy of Sciences Publication Activity Database

    Hreha, P.; Radvanská, A.; Hloch, Sergej; Peržel, V.; Krolczyk, G.; Monková, K.

    2014-01-01

    Roč. 77, 1-4 (2014), s. 763-774 ISSN 0268-3768 Institutional support: RVO:68145535 Keywords : Abrasive water jet * Abrasive mass flow rate * Vibration Subject RIV: JQ - Machines ; Tools Impact factor: 1.458, year: 2014 http://link.springer.com/article/10.1007%2Fs00170-014-6497-9#page-1

  17. Analytical solution of mass transfer effects on unsteady flow past an ...

    African Journals Online (AJOL)

    This paper discussed the analytical solution of unsteady free convection and mass transfer flow past an accelerated infinite vertical porous flat plate with suction, heat generation and chemical species when the plate accelerates in its own plane. The governing equations are solved analytically using perturbation technique.

  18. Optimization of a micro Coriolis mass flow sensor using Lorentz force actuation

    NARCIS (Netherlands)

    Groenesteijn, Jarno; Lammerink, Theodorus S.J.; Wiegerink, Remco J.; Haneveld, J.; Lötters, Joost Conrad

    2012-01-01

    In this paper we present Finite Element models to optimize the Lorentz force actuation of a micro Coriolis mass flow sensor. These models specify six different configurations for the permanent magnets used to create the magnetic field for the actuation. The models are used to compare the various

  19. Study of the possibility of determining mass flow of water from neutron activation measurements with flow simulations and neural networks

    Energy Technology Data Exchange (ETDEWEB)

    Linden, P.; Pazsit, I. [Department of Reactor Physics, Chalmers University of Technology, Goeteborg (Sweden)

    1998-08-01

    Mass flow of water in a pipe can be measured in a non-intrusive way by the pulsed neutron activation (PNA) technique. From such measurements, mass flow can be estimated by various techniques of time averaging, performed on the time-resolved detector signal(s). However, time averaging methods have a few percent systematic error, which, in addition, is not a constant but varies with flow and measurement parameters. Achieving a precision better than 1% from PNA measurements is a hitherto unsolved task. In this paper a methodology is suggested to solve this task and is tested by simulation methods. The method is based on the use of artificial neural networks to determine mass flow rate from the time resolved detector signal. To achieve this, the network needs to be trained on a large number of real detector data. It is suggested that these data should be obtained by advanced numerical simulation of the PNA measurement. In this paper we use a simplified simulation model for a feasibility study of the methodology. It is shown that a neural network is capable to determine the mass flow rate with a precision of about 0.5%. (orig.) [Deutsch] Das Stroemungsverhalten von Wasser in einer Leitung kann nicht-invasiv durch gepulste Neutronenaktivierungsverfahren (PNA) gemessen werden. Durch solche Messungen kann das Stroemungsverhalten mit Hilfe verschiedener Techniken der Mittelung ueber zeitabhaengige Detektorsignale bestimmt werden. Der systematische Fehler von Zeitmittelungsmethoden liegt jedoch bei ein paar Prozent und ist zusaetzlich nicht konstant, sondern variiert mit den Stroemungs- und Messparametern. Das Erreichen einer Genauigkeit von besser als 1% ist also bei Neutronenaktivierungsverfahren ein bisher ungeloestes Problem. In der vorliegenden Arbeit wird eine Methode zur Loesung dieser Aufgabe vorgeschlagen und mit Hilfe von Simulationsverfahren getestet. Die Methode basiert auf der Verwendung von kuenstlichen, neuralen Netzwerken zur Bestimmung des

  20. Heat and mass transfer in magnetohydrodynamic flow of micropolar fluid on a circular cylinder with uniform heat and mass flux

    CERN Document Server

    Mansour, M A; El-Kabeir, S M

    2000-01-01

    Steady laminar boundary layer analysis of heat and mass transfer characteristics in magnetohydrodynamic (MHD) flow of a micropolar fluid on a circular cylinder maintained at uniform heat and mass flux has been conducted. The solution of the energy equation inside the boundary layer is obtained as a power series of the distance measured along the surface from the front stagnation point of the cylinder. The results of dimensionless temperature, Nusselt number, wall shear stress, wall couple stress and Sherwood number have been presented graphically for various values of the material parameters. The results indicate that the micropolar fluids display a reduction in drag as well as heat transfer rate when compared with Newtonian fluids.

  1. Net Locality

    DEFF Research Database (Denmark)

    de Souza e Silva, Adriana Araujo; Gordon, Eric

    Provides an introduction to the new theory of Net Locality and the profound effect on individuals and societies when everything is located or locatable. Describes net locality as an emerging form of location awareness central to all aspects of digital media, from mobile phones, to Google Maps...... of emerging technologies, from GeoCities to GPS, Wi-Fi, Wiki Me, and Google Android....

  2. Net Neutrality

    DEFF Research Database (Denmark)

    Savin, Andrej

    2017-01-01

    Repealing “net neutrality” in the US will have no bearing on Internet freedom or security there or anywhere else.......Repealing “net neutrality” in the US will have no bearing on Internet freedom or security there or anywhere else....

  3. Mixed convection heat and mass transfer in peristaltic flow with chemical reaction and inclined magnetic field

    Science.gov (United States)

    Noreen, S.; Hayat, T.; Alsaedi, A.; Qasim, M.

    2013-09-01

    A mathematical model is constructed to investigate the mixed convective heat and mass transfer effects on peristaltic flow of magnetohydrodynamic pseudoplastic fluid in a symmetric channel. An analysis has been carried out to examine the impact of an inclined magnetic field and chemical reaction in presence of heat sink/source. Mechanics of flow and heat/mass transfer described in terms of continuity, linear momentum, energy and concentration equations are predicted by using long wavelength and low Reynolds number. Expressions for stream function, temperature, concentration and pressure gradient are derived. Numerical simulation is performed for the rise in pressure per wave length. Effects of several physical parameters on the flow quantities are analyzed.

  4. Stagnation point flow and mass transfer with chemical reaction past a stretching/shrinking cylinder.

    Science.gov (United States)

    Najib, Najwa; Bachok, Norfifah; Arifin, Norihan Md; Ishak, Anuar

    2014-02-26

    This paper is about the stagnation point flow and mass transfer with chemical reaction past a stretching/shrinking cylinder. The governing partial differential equations in cylindrical form are transformed into ordinary differential equations by a similarity transformation. The transformed equations are solved numerically using a shooting method. Results for the skin friction coefficient, Schmidt number, velocity profiles as well as concentration profiles are presented for different values of the governing parameters. Effects of the curvature parameter, stretching/shrinking parameter and Schmidt number on the flow and mass transfer characteristics are examined. The study indicates that dual solutions exist for the shrinking cylinder but for the stretching cylinder, the solution is unique. It is observed that the surface shear stress and the mass transfer rate at the surface increase as the curvature parameter increases.

  5. Mass flow due to heating in a binary system - Application to U Cephei

    Science.gov (United States)

    Kondo, Y.; Modisette, J. L.

    1982-01-01

    The possibility of mass flow due to the heating of the cooler component in a close binary system has been investigated. The heating may be caused by irradiation from the hotter companion or by other mechanisms such as the spacial coincidence of non-linear 'g-mode' oscillations in the cooler star. The 2.4-day period binary U Cep, in which gas streaming has been observed, has been chosen for model calculations. Preliminary results show that such a heating of the lower atmosphere of the cooler star could lead to mass flow at an average rate of 10 to the -9th - 10 to the -7th solar mass per year without the star necessarily filling its critical Roche surface.

  6. Stagnation Point Flow and Mass Transfer with Chemical Reaction past a Stretching/Shrinking Cylinder

    Science.gov (United States)

    Najib, Najwa; Bachok, Norfifah; Arifin, Norihan Md.; Ishak, Anuar

    2014-02-01

    This paper is about the stagnation point flow and mass transfer with chemical reaction past a stretching/shrinking cylinder. The governing partial differential equations in cylindrical form are transformed into ordinary differential equations by a similarity transformation. The transformed equations are solved numerically using a shooting method. Results for the skin friction coefficient, Schmidt number, velocity profiles as well as concentration profiles are presented for different values of the governing parameters. Effects of the curvature parameter, stretching/shrinking parameter and Schmidt number on the flow and mass transfer characteristics are examined. The study indicates that dual solutions exist for the shrinking cylinder but for the stretching cylinder, the solution is unique. It is observed that the surface shear stress and the mass transfer rate at the surface increase as the curvature parameter increases.

  7. A mass-conserving multiphase lattice Boltzmann model for simulation of multiphase flows

    Science.gov (United States)

    Niu, Xiao-Dong; Li, You; Ma, Yi-Ren; Chen, Mu-Feng; Li, Xiang; Li, Qiao-Zhong

    2018-01-01

    In this study, a mass-conserving multiphase lattice Boltzmann (LB) model is proposed for simulating the multiphase flows. The proposed model developed in the present study is to improve the model of Shao et al. ["Free-energy-based lattice Boltzmann model for simulation of multiphase flows with density contrast," Phys. Rev. E 89, 033309 (2014)] by introducing a mass correction term in the lattice Boltzmann model for the interface. The model of Shao et al. [(the improved Zheng-Shu-Chew (Z-S-C model)] correctly considers the effect of the local density variation in momentum equation and has an obvious improvement over the Zheng-Shu-Chew (Z-S-C) model ["A lattice Boltzmann model for multiphase flows with large density ratio," J. Comput. Phys. 218(1), 353-371 (2006)] in terms of solution accuracy. However, due to the physical diffusion and numerical dissipation, the total mass of each fluid phase cannot be conserved correctly. To solve this problem, a mass correction term, which is similar to the one proposed by Wang et al. ["A mass-conserved diffuse interface method and its application for incompressible multiphase flows with large density ratio," J. Comput. Phys. 290, 336-351 (2015)], is introduced into the lattice Boltzmann equation for the interface to compensate the mass losses or offset the mass increase. Meanwhile, to implement the wetting boundary condition and the contact angle, a geometric formulation and a local force are incorporated into the present mass-conserving LB model. The proposed model is validated by verifying the Laplace law, simulating both one and two aligned droplets splashing onto a liquid film, droplets standing on an ideal wall, droplets with different wettability splashing onto smooth wax, and bubbles rising under buoyancy. Numerical results show that the proposed model can correctly simulate multiphase flows. It was found that the mass is well-conserved in all cases considered by the model developed in the present study. The developed

  8. Internal hydraulic control in the Little Belt, Denmark - observations of flow configurations and water mass formation

    Science.gov (United States)

    Holtegaard Nielsen, Morten; Vang, Torben; Chresten Lund-Hansen, Lars

    2017-12-01

    Internal hydraulic control, which occurs when stratified water masses are forced through an abrupt constriction, plays an enormous role in nature on both large and regional scales with respect to dynamics, circulation, and water mass formation. Despite a growing literature on this subject surprisingly few direct observations have been made that conclusively show the existence of and the circumstances related to internal hydraulic control in nature. In this study we present observations from the Little Belt, Denmark, one of three narrow straits connecting the Baltic Sea and the North Sea. The observations (comprised primarily of along-strait, detailed transects of salinity and temperature; continuous observations of flow velocity, salinity, and temperature at a permanent station; and numerous vertical profiles of salinity, temperature, fluorescence, and flow velocity in various locations) show that internal hydraulic control is a frequently occurring phenomenon in the Little Belt. The observations, which are limited to south-going flows of approximately two-layered water masses, show that internal hydraulic control may take either of two configurations, i.e. the lower or the upper layer being the active, accelerating one. This is connected to the depth of the pycnocline on the upstream side and the topography, which is both deepening and contracting toward the narrow part of the Little Belt. The existence of two possible flow configurations is known from theoretical and laboratory studies, but we believe that this has never been observed in nature and reported before. The water masses formed by the intense mixing, which is tightly connected with the presence of control, may be found far downstream of the point of control. The observations show that these particular water masses are associated with chlorophyll concentrations that are considerably higher than in adjacent water masses, showing that control has a considerable influence on the primary production and

  9. Architecture for improved mass transport and system performance in redox flow batteries

    Science.gov (United States)

    Houser, Jacob; Pezeshki, Alan; Clement, Jason T.; Aaron, Douglas; Mench, Matthew M.

    2017-05-01

    In this work, electrochemical performance and parasitic losses are combined in an overall system-level efficiency metric for a high performance, all-vanadium redox flow battery. It was found that pressure drop and parasitic pumping losses are relatively negligible for high performance cells, i.e., those capable of operating at a high current density while at a low flow rate. Through this finding, the Equal Path Length (EPL) flow field architecture was proposed and evaluated. This design has superior mass transport characteristics in comparison with the standard serpentine and interdigitated designs at the expense of increased pressure drop. An Aspect Ratio (AR) design is discussed and evaluated, which demonstrates decreased pressure drop compared to the EPL design, while maintaining similar electrochemical performance under most conditions. This AR design is capable of leading to improved system energy efficiency for flow batteries of all chemistries.

  10. Does Body Mass Index Influence Behavioral Regulations, Dispositional Flow and Social Physique Anxiety in Exercise Setting?

    Directory of Open Access Journals (Sweden)

    Gözde Ersöz, Ersin Altiparmak, F. Hülya Aşçı

    2016-06-01

    Full Text Available The purpose of this study was to examine differences in behavioral regulations, dispositional flow, social physique anxiety of exercisers in terms of body mass index (BMI. 782 university students participated in this study. Dispositional Flow State Scale-2, Behavioral Regulations in Exercise Questionnaire-2, Social Physique Anxiety Scale and Physical Activity Stages of Change Questionnaire were administered to participants. After controlling for gender, analysis indicated significant differences in behavioral regulations, dispositional flow and social physique anxiety of exercise participants with regards to BMI. In summary, the findings demonstrate that normal weighted participants exercise for internal reasons while underweighted participants are amotivated for exercise participation. Additionally, participants who are underweight had higher dispositional flow and lower social physique anxiety scores than other BMI classification.

  11. Mass flow discharge and total temperature characterisation of a pyrotechnic gas generator formulation for airbag systems

    Energy Technology Data Exchange (ETDEWEB)

    Neutz, Jochen; Koenig, Andreas [Fraunhofer Institut fuer Chemische Technologie ICT, Pfinztal (Germany); Knauss, Helmut; Jordan, Sebastian; Roediger, Tim; Smorodsky, Boris [Universitaet Stuttgart (Germany). Institut fuer Aerodynamik und Gasdynamik; Bluemcke, Erich Walter [AUDI AG, Department I/EK-523, Ingolstadt (Germany)

    2009-06-15

    The mass flow characteristics of gas generators for airbag applications have to comply with a number of requirements for an optimal deployment of the airbag itself. Up to now, the mass flow was determined from pressure time histories of so-called can tests. This procedure suffers from the missing knowledge on the temperature of the generated gas entering the can. A new test setup described in this paper could overcome this problem by providing highly time resolved information on the gas's total temperature and the mass flow of the generator. The test setup consisted of a combustion chamber with a specially designed Laval nozzle in combination with a temperature sensor of high time resolution. The results showed a high time resolved temperature signal, which was disturbed by the formation of a slag layer on the sensor. Plausibility considerations with experimentally and thermodynamically determined combustion temperatures led to satisfying results for the overall temperature as characteristic parameter of airbag inflating gases flows from pyrotechnics. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  12. Gas Flow in the Capillary of the Atmosphere-to-Vacuum Interface of Mass Spectrometers

    Science.gov (United States)

    Skoblin, Michael; Chudinov, Alexey; Soulimenkov, Ilia; Brusov, Vladimir; Kozlovskiy, Viacheslav

    2017-10-01

    Numerical simulations of a gas flow through a capillary being a part of mass spectrometer atmospheric interface were performed using a detailed laminar flow model. The simulated interface consisted of atmospheric and forevacuum volumes connected via a thin capillary. The pressure in the forevacuum volume where the gas was expanding after passing through the capillary was varied in the wide range from 10 to 900 mbar in order to study the volume flow rate as well as the other flow parameters as functions of the pressure drop between the atmospheric and forevacuum volumes. The capillary wall temperature was varied in the range from 24 to 150 °C. Numerical integration of the complete system of Navier-Stokes equations for a viscous compressible gas taking into account the heat transfer was performed using the standard gas dynamic simulation software package ANSYS CFX. The simulation results were compared with experimental measurements of gas flow parameters both performed using our experimental setup and taken from the literature. The simulated volume flow rates through the capillary differed no more than by 10% from the measured ones over the entire pressure and temperatures ranges. A conclusion was drawn that the detailed digital laminar model is able to quantitatively describe the measured gas flow rates through the capillaries under conditions considered. [Figure not available: see fulltext.

  13. Gas Flow in the Capillary of the Atmosphere-to-Vacuum Interface of Mass Spectrometers.

    Science.gov (United States)

    Skoblin, Michael; Chudinov, Alexey; Soulimenkov, Ilia; Brusov, Vladimir; Kozlovskiy, Viacheslav

    2017-10-01

    Numerical simulations of a gas flow through a capillary being a part of mass spectrometer atmospheric interface were performed using a detailed laminar flow model. The simulated interface consisted of atmospheric and forevacuum volumes connected via a thin capillary. The pressure in the forevacuum volume where the gas was expanding after passing through the capillary was varied in the wide range from 10 to 900 mbar in order to study the volume flow rate as well as the other flow parameters as functions of the pressure drop between the atmospheric and forevacuum volumes. The capillary wall temperature was varied in the range from 24 to 150 °C. Numerical integration of the complete system of Navier-Stokes equations for a viscous compressible gas taking into account the heat transfer was performed using the standard gas dynamic simulation software package ANSYS CFX. The simulation results were compared with experimental measurements of gas flow parameters both performed using our experimental setup and taken from the literature. The simulated volume flow rates through the capillary differed no more than by 10% from the measured ones over the entire pressure and temperatures ranges. A conclusion was drawn that the detailed digital laminar model is able to quantitatively describe the measured gas flow rates through the capillaries under conditions considered. Graphical Abstract ᅟ.

  14. Effects of changing mosquito host searching behaviour on the cost effectiveness of a mass distribution of long-lasting, insecticidal nets: a modelling study.

    Science.gov (United States)

    Briët, Olivier J T; Chitnis, Nakul

    2013-06-26

    The effectiveness of long-lasting, insecticidal nets (LLINs) in preventing malaria is threatened by the changing biting behaviour of mosquitoes, from nocturnal and endophagic to crepuscular and exophagic, and by their increasing resistance to insecticides. Using epidemiological stochastic simulation models, we studied the impact of a mass LLIN distribution on Plasmodium falciparum malaria. Specifically, we looked at impact in terms of episodes prevented during the effective life of the batch and in terms of net health benefits (NHB) expressed in disability adjusted life years (DALYs) averted, depending on biting behaviour, resistance (as measured in experimental hut studies), and on pre-intervention transmission levels. Results were very sensitive to assumptions about the probabilistic nature of host searching behaviour. With a shift towards crepuscular biting, under the assumption that individual mosquitoes repeat their behaviour each gonotrophic cycle, LLIN effectiveness was far less than when individual mosquitoes were assumed to vary their behaviour between gonotrophic cycles. LLIN effectiveness was equally sensitive to variations in host-searching behaviour (if repeated) and to variations in resistance. LLIN effectiveness was most sensitive to pre-intervention transmission level, with LLINs being least effective at both very low and very high transmission levels, and most effective at around four infectious bites per adult per year. A single LLIN distribution round remained cost effective, except in transmission settings with a pre-intervention inoculation rate of over 128 bites per year and with resistant mosquitoes that displayed a high proportion (over 40%) of determined crepuscular host searching, where some model variants showed negative NHB. Shifts towards crepuscular host searching behaviour can be as important in reducing LLIN effectiveness and cost effectiveness as resistance to pyrethroids. As resistance to insecticides is likely to slow down the

  15. The impact of mass drug administration and long-lasting insecticidal net distribution on Wuchereria bancrofti infection in humans and mosquitoes: an observational study in northern Uganda.

    Science.gov (United States)

    Ashton, Ruth A; Kyabayinze, Daniel J; Opio, Tom; Auma, Anna; Edwards, Tansy; Matwale, Gabriel; Onapa, Ambrose; Brooker, Simon; Kolaczinski, Jan H

    2011-07-15

    Lymphatic filariasis (LF) in Uganda is caused by Wuchereria bancrofti and transmitted by anopheline mosquitoes. The mainstay of elimination has been annual mass drug administration (MDA) with ivermectin and albendazole, targeted to endemic districts, but has been sporadic and incomplete in coverage. Vector control could potentially contribute to reducing W. bancrofti transmission, speeding up progress towards elimination. To establish whether the use of long-lasting insecticidal nets (LLINs) can contribute towards reducing transmission of W. bancrofti in a setting with ongoing MDA, a study was conducted in an area of Uganda highly endemic for both LF and malaria. Baseline parasitological and entomological assessments were conducted in 2007, followed by high-coverage LLIN distribution. Net use and entomological surveys were carried out after one year, and final parasitological and entomological evaluations were conducted in 2010. Three rounds of MDA had taken place before the study commenced, with a further three rounds completed during the course of the study. In 2007, rapid mapping indicated 22.3% of schoolchildren were W. bancrofti antigen positive, and a baseline survey during the same year found age-adjusted microfilaraemia prevalence was 3.7% (95% confidence interval (CI): 2.6-5.3%). In 2010, age-adjusted microfilaraemia prevalence had fallen to 0.4%, while antigenaemia rates were 0.2% in children < 5 years and 6.0% in ≥ 5 years. In 2010, universal coverage of mosquito nets in a household was found to be protective against W. bancrofti antigen (odds ratio = 0.44, 95% CI: 0.22-0.89). Prevalence of W. bancrofti larvae in anopheline mosquitoes had decreased significantly between the 2007 and 2010 surveys, but there was an apparent increase in vector densities. A marked reduction in W. bancrofti infection and infectivity in humans was observed in the study area, where both MDA and LLINs were used to reduce transmission. The extent to which LLINs contributed to

  16. Predictions of the marviken subcooled critical mass flux using the critical flow scaling parameters

    Energy Technology Data Exchange (ETDEWEB)

    Park, Choon Kyung; Chun, Se Young; Cho, Seok; Yang, Sun Ku; Chung, Moon Ki [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-12-31

    A total of 386 critical flow data points from 19 runs of 27 runs in the Marviken Test were selected and compared with the predictions by the correlations based on the critical flow scaling parameters. The results show that the critical mass flux in the very large diameter pipe can be also characterized by two scaling parameters such as discharge coefficient and dimensionless subcooling (C{sub d,ref} and {Delta}{Tau}{sup *} {sub sub}). The agreement between the measured data and the predictions are excellent. 8 refs., 8 figs. 1 tab. (Author)

  17. MHD mass transfer flow of an Eyring-Powell fluid over a stretching sheet

    Science.gov (United States)

    Babu, D. Harish; Sudheer Babu, M.; Narayana, P. V. Satya

    2017-11-01

    This study investigates the mass transfer flow of Powell-Eyring fluid due to the porous stretching sheet with magnetic field. A second-order approximation of the Eyring-Powell fluid model is used to obtain the flow equations. Using usual similarity transformations, the governing equations have been transformed into non-linear ordinary differential equations and solved by a powerful technique known as shooting method along with R-K fourth order scheme. Graphical results displaying the influence of pertinent physical parameters on the velocity, concentration profile, skin-friction coefficient and Sherwood number are given.

  18. Mass transfer during sulfuric acid concentration by evaporation into the air flow

    Directory of Open Access Journals (Sweden)

    V. K. Lukashov

    2016-12-01

    Full Text Available This article shows the results of the study of mass transfer under periodic concentration of sulfuric acid by evaporation inthe gas flow, neutral with respect to the components of acid.Used mathematical model for mass transferbases on the proposed simplified physical representations.This model has allowed to construct an algorithm for calculation the coefficient of mass transfer from the liquid phase into the gas flow. The algorithm uses the experimental data of change the amount of acid and concentration of the water taken from the laboratory tests. Time-based Nusselt diffusion criterion represent the results of the study at different modes of the evaporation process.It has been found that the character of the influence of temperature and initial acid concentration on Nusselt diffusion criterion depends on the variation range of the mass fraction of water in the acid.It is shown that these dependences are well approximated by an exponential function from the dimensionless parameters of the process. This allows usingthem for calculation the mass transfer coefficient into the gas phase in a batch process of concentrating in the range of investigated modes.

  19. Chip-type asymmetrical flow field-flow fractionation channel coupled with mass spectrometry for top-down protein identification.

    Science.gov (United States)

    Kim, Ki Hun; Moon, Myeong Hee

    2011-11-15

    A chip-type design asymmetrical flow field-flow fractionation (AF4) channel has been developed for high-speed separation of proteins and top-down proteomic analysis using online coupled electrospray ionization mass spectrometry (ESI-MS). The new miniaturized AF4 channel was assembled by stacking multilayer thin stainless steel (SS, 1.5 mm each) plates embedded with an SS frit in such a way that the total thickness of the channel assembly was about 6 mm. The efficiency of the miniaturized AF4 channel at different channel lengths was examined with the separation of protein standards by adjusting flow rates in which an identical effective channel flow rate or an identical void time can be maintained at different channels. Detection limit, overloading effect, reproducibility, and influence of channel membrane materials on separation efficiency were investigated. Desalting and purification of proteins achieved during the AF4 operation by the action of an exiting crossflow and the use of aqueous mass-spectrometry-compatible (MS-compatible) buffer were advantageous for online coupling of the chip-type AF4 with ESI-MS. The direct coupling of AF4 and ESI-MS capabilities was demonstrated for the high-speed separation and identification of carbonic anhydrase (29 kDa) and transferrin (78 kDa) by full scan MS and for the first top-down identification of proteins with AF4-ESI-MS-MS using collision-induced fragmentation (CID). The presence of intact dimers (156 kDa) of transferrin was confirmed by AF4-ESI-MS via size separation of the dimers from monomers, followed by multiply charged ion spectral analysis of the dimers and molecular mass determinations. It was also found from these experiments that AF4-ESI-MS analysis of transferrin exhibited an increased signal-to-noise ratio compared to that of direct ESI-MS analysis due to online purification of the protein sample and size separation of dimers with AF4.

  20. Air mass flow estimation in turbocharged diesel engines from in-cylinder pressure measurement

    Energy Technology Data Exchange (ETDEWEB)

    Desantes, J.M.; Galindo, J.; Guardiola, C.; Dolz, V. [CMT - Motores Termicos, Universidad Politecnica de Valencia (Spain)

    2010-01-15

    Air mass flow determination is needed for the control of current internal combustion engines. Current methods are based on specific sensors (as hot wire anemometers) or indirect estimation through manifold pressure. With the availability of cylinder pressure sensors for engine control, methods based on them can be used for replacing or complementing standard methods. Present paper uses in cylinder pressure increase during the intake stroke for inferring the trapped air mass. The method is validated on two different turbocharged diesel engines and compared with the standard methods. (author)

  1. Free mass distribution of long lasting insecticidal nets lead to high levels of LLIN access and use in Madagascar, 2010: A cross-sectional observational study.

    Directory of Open Access Journals (Sweden)

    Alyssa M Finlay

    Full Text Available Madagascar conducted the first two phases of a national free mass distribution campaign of long-lasting insecticidal nets (LLINs during a political crisis in 2009 aiming to achieve coverage of two LLINs per household as part of the National Malaria Control Strategy. The campaign targeted households in 19 out of 91 total health districts.A community-based cross-sectional household survey using a three-stage cluster sample design was conducted four months post campaign to assess LLIN ownership, access and use. Multivariable logistic regression analysis was used to identify factors associated with household LLIN access and individual LLIN use.A total of 2211 households were surveyed representing 8867 people. At least one LLIN was present in 93.5% (95% confidence interval [CI], 91.6-95.5% of households and 74.8% (95% CI, 71.0-78.6% owned at least two LLINs. Access measured as the proportion of the population that could potentially be covered by household-owned LLINs was 77.2% (77.2% (95% CI, 72.9-81.3% and LLIN use by all individuals was 84.2% (95% CI, 81.2-87.2%. LLIN use was associated with knowledge of insecticide treated net use to prevent malaria (OR = 3.58, 95% CI, 1.85-6.94, household ownership of more LLINs (OR 2.82, 95% CI 1.85-4.3, presence of children under five (OR = 2.05, 95% CI, 1.67-2.51, having traveled to the distribution point and receiving information about hanging a bednet (OR = 1.56, 95% CI, 1.41-1.74, and having received a post-campaign visit by a community mobilizer (OR = 1.75, 95% CI, 1.26-2.43. Lower LLIN use was associated with increasing household size (OR = 0.81 95% CI 0.77-0.85 and number of sleeping spaces (OR = 0.55, 95% CI, 0.44-0.68.A large scale free mass LLIN distribution campaign was feasible and effective at achieving high LLIN access and use in Madagascar. Campaign process indicators highlighted potential areas for strengthening implementation to optimize access and equity.

  2. Free mass distribution of long lasting insecticidal nets lead to high levels of LLIN access and use in Madagascar, 2010: A cross-sectional observational study

    Science.gov (United States)

    Butts, Jessica; Ranaivoharimina, Harilala; Cotte, Annett H.; Ramarosandratana, Benjamin; Rabarijaona, Henintsoa; Tuseo, Luciano; Chang, Michelle; Vanden Eng, Jodi

    2017-01-01

    Background Madagascar conducted the first two phases of a national free mass distribution campaign of long-lasting insecticidal nets (LLINs) during a political crisis in 2009 aiming to achieve coverage of two LLINs per household as part of the National Malaria Control Strategy. The campaign targeted households in 19 out of 91 total health districts. Methods A community-based cross-sectional household survey using a three-stage cluster sample design was conducted four months post campaign to assess LLIN ownership, access and use. Multivariable logistic regression analysis was used to identify factors associated with household LLIN access and individual LLIN use. Results A total of 2211 households were surveyed representing 8867 people. At least one LLIN was present in 93.5% (95% confidence interval [CI], 91.6–95.5%) of households and 74.8% (95% CI, 71.0–78.6%) owned at least two LLINs. Access measured as the proportion of the population that could potentially be covered by household-owned LLINs was 77.2% (77.2% (95% CI, 72.9–81.3%) and LLIN use by all individuals was 84.2% (95% CI, 81.2–87.2%). LLIN use was associated with knowledge of insecticide treated net use to prevent malaria (OR = 3.58, 95% CI, 1.85–6.94), household ownership of more LLINs (OR 2.82, 95% CI 1.85–4.3), presence of children under five (OR = 2.05, 95% CI, 1.67–2.51), having traveled to the distribution point and receiving information about hanging a bednet (OR = 1.56, 95% CI, 1.41–1.74), and having received a post-campaign visit by a community mobilizer (OR = 1.75, 95% CI, 1.26–2.43). Lower LLIN use was associated with increasing household size (OR = 0.81 95% CI 0.77–0.85) and number of sleeping spaces (OR = 0.55, 95% CI, 0.44–0.68). Conclusions A large scale free mass LLIN distribution campaign was feasible and effective at achieving high LLIN access and use in Madagascar. Campaign process indicators highlighted potential areas for strengthening implementation to optimize

  3. Influence of temporally variable groundwater flow conditions on point measurements and contaminant mass flux estimations

    DEFF Research Database (Denmark)

    Rein, Arno; Bauer, S; Dietrich, P

    2009-01-01

    Monitoring of contaminant concentrations, e.g., for the estimation of mass discharge or contaminant degradation rates. often is based on point measurements at observation wells. In addition to the problem, that point measurements may not be spatially representative. a further complication may arise...... information representing observation wells installed along control planes using different well frequencies and configurations. Results of the scenario simulations show that temporally variable flow conditions can lead to significant temporal fluctuations of the concentration and thus are a substantial source...... is present, the concentration variability due to a fluctuating groundwater flow direction varies significantly within the control plane and between the different realizations. Determination of contaminant mass fluxes is also influenced by the temporal variability of the concentration measurement, especially...

  4. Biogenic materials in Switzerland - mass and energy flows; Biogene Gueter in der Schweiz: Massen- und Energiefluesse

    Energy Technology Data Exchange (ETDEWEB)

    Scheurer, K.; Baier, U.

    2001-07-01

    This study supplements a series of studies carried out under the 'Energy 2000' programme and its follow-up 'SwissEnergy' on the energy potential of biomass in Switzerland. This study compiles data from existing studies and statistics and presents them as detailed mass and energy flow diagrams. The findings of the study confirm that the most important biomass fluxes are generated by animal feed stuffs and manure and that these represent an important potential for use as a source of energy. The authors state that in the foodstuffs and wood/paper industries a high level of sustainability in resource usage has been attained and that the largest losses in mass and energy flows can be found in livestock breeding and human biomass consumption.

  5. Gas-liquid mass transfer in a cross-flow hollow fiber module : Analytical model and experimental validation

    NARCIS (Netherlands)

    Dindore, V. Y.; Versteeg, G. F.

    2005-01-01

    The cross-flow operation of hollow fiber membrane contactors offers many advantages and is preferred over the parallel-flow contactors for gas-liquid mass transfer operations. However, the analysis of such a cross-flow membrane gas-liquid contactor is complicated due to the change in concentrations

  6. Development of a pressure based vortex-shedding meter: measuring unsteady mass-flow in variable density gases

    Science.gov (United States)

    Ford, C. L.; Winroth, M.; Alfredsson, P. H.

    2016-08-01

    An entirely pressure-based vortex-shedding meter has been designed for use in practical time-dependent flows. The meter is capable of measuring mass-flow rate in variable density gases in spite of the fact that fluid temperature is not directly measured. Unlike other vortex meters, a pressure based meter is incredibly robust and may be used in industrial type flows; an environment wholly unsuitable for hot-wires for example. The meter has been tested in a number of static and dynamic flow cases, across a range of mass-flow rates and pressures. The accuracy of the meter is typically better than about 3% in a static flow and resolves the fluctuating mass-flow with an accuracy that is better than or equivalent to a hot-wire method.

  7. Design of a PC Based Mass Flow Indicator of an Electrical Motor Driven Water Lift Pump Using Motor Load Current as the Flow Sensing Parameter

    Directory of Open Access Journals (Sweden)

    S. C. BERA

    2009-09-01

    Full Text Available Mass flow rate of liquid at the outlet of a liquid lift pump is an important parameter to be measured and controlled in a process industry. In the present paper, the design of a PC based mass flow indicator of an electrical motor driven water lift pump using motor load current as the mass flow sensing parameter has been studied. The motor load current has been sensed by an opto-isolator based circuit and the output of this circuit has been displayed in a PC monitor using Labtech Note Book Pro software. A theoretical equation relating the output of opto-isolator circuit with mass flow rate has been derived and experimental study has been carried out to verify this theoretical equation, assuming the volume flow rate of water at constant room temperature to be proportional to mass flow rate. The experimental results are presented in the paper. It has been observed that the opto-isolator output and the on-line display in PC monitor both vary almost linearly with mass flow rate. Percentage deviation of the experimental results from ideal linearity and repeatability in terms of standard deviation are found to be within tolerable limit.

  8. Proceedings of the workshop on numerical modeling of thermohydrological flow in fractured rock masses

    Energy Technology Data Exchange (ETDEWEB)

    1980-09-01

    Nineteen papers were presented at the workshop on modeling thermohydrologic flow in fractured masses. This workshop was a result of the interest currently being given to the isolation of nuclear wastes in geologic formations. Included in these proceedings are eighteen of the presentations, one abstract and summaries of the panel discussions. The papers are listed under the following categories: introduction; overviews; fracture modelings; repository studies; geothermal models; and recent developments. Eighteen of the papers have been abstracted and indexed.

  9. Differentiating Organic from Conventional Peppermints Using Chromatographic and Flow-Injection Mass Spectrometric (FIMS) Fingerprints

    OpenAIRE

    Gao, Boyan; Lu, Yingjian; Qin, Fang; Chen, Pei; Shi, Haiming; Charles, Denys; Yu, Liangli (Lucy)

    2012-01-01

    High performance liquid chromatography (HPLC) and flow-injection mass spectrometric (FIMS) fingerprinting techniques were tested for their potential in differentiating organic and conventional peppermint samples. Ten organic and ten conventional peppermint samples were examined using HPLC-UV and FIMS methods. The principal component analysis (PCA) showed that both HPLC and FIMS fingerprints could determine the difference in the commercial organic and conventional peppermints. FIMS fingerprint...

  10. Modeling hazardous mass flows Geoflows09: Mathematical and computational aspects of modeling hazardous geophysical mass flows; Seattle, Washington, 9–11 March 2009

    Science.gov (United States)

    Iverson, Richard M.; LeVeque, Randall J.

    2009-01-01

    A recent workshop at the University of Washington focused on mathematical and computational aspects of modeling the dynamics of dense, gravity-driven mass movements such as rock avalanches and debris flows. About 30 participants came from seven countries and brought diverse backgrounds in geophysics; geology; physics; applied and computational mathematics; and civil, mechanical, and geotechnical engineering. The workshop was cosponsored by the U.S. Geological Survey Volcano Hazards Program, by the U.S. National Science Foundation through a Vertical Integration of Research and Education (VIGRE) in the Mathematical Sciences grant to the University of Washington, and by the Pacific Institute for the Mathematical Sciences. It began with a day of lectures open to the academic community at large and concluded with 2 days of focused discussions and collaborative work among the participants.

  11. Three-dimensional flow in a cylinder with sidewall mass addition

    Science.gov (United States)

    Staab, P. L.; Kassoy, D. R.

    2002-09-01

    Three-dimensional, time-dependent, nonlinear flow dynamics within a cylinder with sidewall mass injection are investigated. A nonaxisymmetric transient injection velocity, prescribed along the sidewall boundary of a long, narrow, half-open cylinder, induces a low Mach number, high Reynolds number flow. The injection drives nearly planar axial acoustic disturbances, which interact with the injected fluid to produce the azimuthal component of vorticity on the sidewall in an inviscid manner. A smaller, but important azimuthally dependent transient disturbance, driven by the nonaxisymmetric injection disturbance leads to the axial component of vorticity on the cylinder sidewall. Both components of vorticity are shown to convect toward the center of the cylinder, diffuse radially, and convect downstream. Other results show that the axial component of vorticity produced along the sidewall is largest near the maximum of a mass source distribution in the azimuthal dimension. The amplitude of the axial vorticity component decreases significantly away from the injection surface and at other azimuthal locations. The analysis of these flow processes is based on the full three-dimensional Navier-Stokes equations. A formal multiple-scale asymptotic analysis, based on the behavior of the axial Mach number M[right arrow]0, is used to derive reduced equations. It is shown that the primary rotational flow response is described by a nonlinear, convection-diffusion equation.

  12. Numerical simulation of annular two-phase flow considering the four involved mass transfers

    Science.gov (United States)

    Baniamerian, Z.; Mehdipour, R.

    2013-05-01

    In the present study, a numerical model is developed for simulation of annular two-phase flow considering bubbly flow regime in the liquid film along with the four involved mechanisms of mass transfer those are evaporation, entrainment, deposition and condensation. In the numerical approach, liquid film accompanied by fine nucleated bubbles are simulated with innovative model named suction model, the whole domain containing liquid film and the vapor core is simulated by volume of fluid model. While the vapor and the entrained droplets are treated as homogeneous flow. The interface between the liquid and the vapor is traced by level set formulation. The model is then validated by experimental models of Lee & Lee and Stevanovic et al. and shows a good precision such that it predicts the experimental results of Stevanivic et al. Better than their own numerical model. This issue is due to the least possible simplifying assumptions along with considering the effect of boiling in liquid film and all mechanisms of mass transfer in the fluid flow.

  13. Implementation of the Fissile Mass Flow Monitor Source Verification and Confirmation

    Energy Technology Data Exchange (ETDEWEB)

    Uckan, Taner [ORNL; March-Leuba, Jose A [ORNL; Powell, Danny H [ORNL; Nelson, Dennis [Sandia National Laboratories (SNL); Radev, Radoslav [Lawrence Livermore National Laboratory (LLNL)

    2007-12-01

    This report presents the verification procedure for neutron sources installed in U.S. Department of Energy equipment used to measure fissile material flow. The Fissile Mass Flow Monitor (FMFM) equipment determines the {sup 235}U fissile mass flow of UF{sub 6} gas streams by using {sup 252}Cf neutron sources for fission activation of the UF{sub 6} gas and by measuring the fission products in the flow. The {sup 252}Cf sources in each FMFM are typically replaced every 2 to 3 years due to their relatively short half-life ({approx} 2.65 years). During installation of the new FMFM sources, the source identity and neutronic characteristics provided by the manufacturer are verified with the following equipment: (1) a remote-control video television (RCTV) camera monitoring system is used to confirm the source identity, and (2) a neutron detection system (NDS) is used for source-strength confirmation. Use of the RCTV and NDS permits remote monitoring of the source replacement process and eliminates unnecessary radiation exposure. The RCTV, NDS, and the confirmation process are described in detail in this report.

  14. Long-lasting insecticidal net (LLIN) ownership, use and cost of implementation after a mass distribution campaign in Kasaï Occidental Province, Democratic Republic of Congo.

    Science.gov (United States)

    Ntuku, Henry Maggi; Ruckstuhl, Laura; Julo-Réminiac, Jean-Emmanuel; Umesumbu, Solange E; Bokota, Alain; Tshefu, Antoinette Kitoto; Lengeler, Christian

    2017-01-09

    Long-lasting insecticidal nets (LLIN) are a highly effective means for preventing malaria infection and reducing associated morbidity and mortality. Mass free distribution campaigns have been shown to rapidly increase LLIN ownership and use. Around 3.5 million LLINs were distributed free of charge in the Kasaï Occidental Province in the Democratic Republic of Congo (DRC) in September-October 2014, using two different approaches, a fixed delivery strategy and a door-to-door strategy including hang-up activities. Repeated community-based cross-sectional surveys were conducted 2 months before and six months after the mass distribution. Descriptive statistics were used to measure changes in key malaria household indicators. LLIN ownership and use were compared between delivery strategies. Univariate and multivariate logistic regression analyses were used to identify factors associated with LLIN use before and after the mass distribution. A comparative financial cost analysis between the fixed delivery and door-to-door distribution strategies was carried out from the provider's perspective. Household ownership of at least one LLIN increased from 39.4% pre-campaign to 91.4% post-campaign and LLIN universal coverage, measured as the proportion of households with at least one LLIN for every two people increased from 4.1 to 41.1%. Population access to LLIN within the household increased from 22.2 to 80.7%, while overall LLIN use increased from 18.0 to 68.3%. Higher LLIN ownership was achieved with the fixed delivery strategy compared with the door-to-door (92.5% [95% CI 90.2-94.4%] versus 85.2% [95% CI 78.5-90.0%]), while distribution strategy did not have a significant impact on LLIN use (69.6% [95% CI 63.1-75.5%] versus 65.7% [95% CI 52.7-76.7%]). Malaria prevalence among children aged 6-59 months was 44.8% post-campaign. Living in a household with sufficient numbers of LLIN to cover all members was the strongest determinant of LLIN use. The total financial cost per

  15. Comparison of clustering methods for high-dimensional single-cell flow and mass cytometry data.

    Science.gov (United States)

    Weber, Lukas M; Robinson, Mark D

    2016-12-01

    Recent technological developments in high-dimensional flow cytometry and mass cytometry (CyTOF) have made it possible to detect expression levels of dozens of protein markers in thousands of cells per second, allowing cell populations to be characterized in unprecedented detail. Traditional data analysis by "manual gating" can be inefficient and unreliable in these high-dimensional settings, which has led to the development of a large number of automated analysis methods. Methods designed for unsupervised analysis use specialized clustering algorithms to detect and define cell populations for further downstream analysis. Here, we have performed an up-to-date, extensible performance comparison of clustering methods for high-dimensional flow and mass cytometry data. We evaluated methods using several publicly available data sets from experiments in immunology, containing both major and rare cell populations, with cell population identities from expert manual gating as the reference standard. Several methods performed well, including FlowSOM, X-shift, PhenoGraph, Rclusterpp, and flowMeans. Among these, FlowSOM had extremely fast runtimes, making this method well-suited for interactive, exploratory analysis of large, high-dimensional data sets on a standard laptop or desktop computer. These results extend previously published comparisons by focusing on high-dimensional data and including new methods developed for CyTOF data. R scripts to reproduce all analyses are available from GitHub (https://github.com/lmweber/cytometry-clustering-comparison), and pre-processed data files are available from FlowRepository (FR-FCM-ZZPH), allowing our comparisons to be extended to include new clustering methods and reference data sets. © 2016 The Authors. Cytometry Part A published by Wiley Periodicals, Inc. on behalf of ISAC. © 2016 The Authors. Cytometry Part A Published by Wiley Periodicals, Inc. on behalf of ISAC.

  16. Impact of mass distribution of free long-lasting insecticidal nets on childhood malaria morbidity: The Togo National Integrated Child Health Campaign

    Directory of Open Access Journals (Sweden)

    Sodahlon Yao K

    2010-07-01

    Full Text Available Abstract Background An evaluation of the short-term impact on childhood malaria morbidity of mass distribution of free long-lasting insecticidal nets (LLINs to households with children aged 9-59 months as part of the Togo National Integrated Child Health Campaign. Methods The prevalence of anaemia and malaria in children aged zero to 59 months was measured during two cross-sectional household cluster-sample surveys conducted during the peak malaria transmission, three months before (Sept 2004, n = 2521 and nine months after the campaign (Sept 2005, n = 2813 in three districts representative of Togo's three epidemiological malaria transmission regions: southern tropical coastal plains (Yoto, central fertile highlands (Ogou and northern semi-arid savannah (Tone. Results In households with children 65% in all 3 districts. Reported ITN use by children during the previous night was 35.9%, 43.8% and 80.6% in Yoto, Ogou and Tone, respectively. Rainfall patterns were comparable in both years. The overall prevalence of moderate to severe anaemia (Hb The effect was predominantly seen in children aged 18-59 months and in the two southern districts: PR (95% CI for moderate to severe anaemia and clinical malaria: Yoto 0.62 (0.44-0.88 and 0.49 (0.35-0.75; Ogou 0.54 (0.37-0.79 and 0.85 (0.57-1.27, respectively. Similar reductions occurred in children Conclusions A marked reduction in childhood malaria associated morbidity was observed in the year following mass distribution of free LLINs in two of the three districts in Togo. Sub-national level impact evaluations will contribute to a better understanding of the impact of expanding national malaria control efforts.

  17. Coupled effect of flow variability and mass transfer on contaminant transport and attenuation in groundwater

    Science.gov (United States)

    Cvetkovic, Vladimir; Fiori, Aldo; Dagan, Gedeon

    2016-04-01

    The driving mechanism of contaminant transport in aquifers is groundwater flow, which is controlled by boundary conditions and heterogeneity of hydraulic properties. In this work we show how hydrodynamics and mass transfer can be combined in a general analytical manner to derive a physically-based (or process-based) residence time distribution for a given integral scale of the hydraulic conductivity; the result can be applied for a broad class of linear mass transfer processes. The derived tracer residence time distribution is a transfer function with parameters to be inferred from combined field and laboratory measurements. It is scalable relative to the correlation length and applicable for an arbitrary statistical distribution of the hydraulic conductivity. Based on the derived residence time distribution, the coefficient of variation and skewness of contaminant residence time are illustrated assuming a log-normal hydraulic conductivity distribution and first-order mass transfer. We show that for a low Damkohler number the coefficient of variation is more strongly influenced by mass transfer than by heterogeneity, whereas skewness is more strongly influenced by heterogeneity. The derived physically-based residence time distribution for solute transport in heterogeneous aquifers is particularly useful for studying natural attenuation of contaminants. We illustrate the relative impacts of high heterogeneity and a generalised (non-Fickian) multi-rate mass transfer on natural attenuation defined as contaminant mass loss from injection to a downstream compliance boundary.

  18. Energy balance and mass conservation in reduced order models of fluid flows

    Science.gov (United States)

    Mohebujjaman, Muhammad; Rebholz, Leo G.; Xie, Xuping; Iliescu, Traian

    2017-10-01

    In this paper, we investigate theoretically and computationally the conservation properties of reduced order models (ROMs) for fluid flows. Specifically, we investigate whether the ROMs satisfy the same (or similar) energy balance and mass conservation as those satisfied by the Navier-Stokes equations. All of our theoretical findings are illustrated and tested in numerical simulations of a 2D flow past a circular cylinder at a Reynolds number Re = 100. First, we investigate the ROM energy balance. We show that using the snapshot average for the centering trajectory (which is a popular treatment of nonhomogeneous boundary conditions in ROMs) yields an incorrect energy balance. Then, we propose a new approach, in which we replace the snapshot average with the Stokes extension. Theoretically, the Stokes extension produces an accurate energy balance. Numerically, the Stokes extension yields more accurate results than the standard snapshot average, especially for longer time intervals. Our second contribution centers around ROM mass conservation. We consider ROMs created using two types of finite elements: the standard Taylor-Hood (TH) element, which satisfies the mass conservation weakly, and the Scott-Vogelius (SV) element, which satisfies the mass conservation pointwise. Theoretically, the error estimates for the SV-ROM are sharper than those for the TH-ROM. Numerically, the SV-ROM yields significantly more accurate results, especially for coarser meshes and longer time intervals.

  19. Study on heat and mass transfer characteristics of humid air-flow in a fin bundle

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Dong-Hwi [Air-Conditioner Research Laboratory, LG Electronics, Seoul 153-082 (Korea); Koyama, Shigeru; Kuwahara, Ken [Department of Energy and Environmental Engineering, Kyushu University, Kasuga, Fukuoka 816-8580 (Japan); Kwon, Jeong-Tae [Department of Mechanical Engineering, Hoseo University, Asan, Chungnam 336-795 (Korea); Park, Byung-Duck [School of Mechanical and Automotive Engineering, Kyungpook National University, Sangju, Gyeongbuk 742-711 (Korea)

    2010-11-15

    This paper deals with the heat and mass transfer characteristics of humid air-flow under frosting conditions. A slit fin bundle was used for the simulation of fins of a heat exchanger. The effects of the cooling block temperature, air humidity and air velocity on the frosting characteristics were experimentally investigated. The frosted mass was affected considerably by the cooling block temperature and air humidity. However, the effect of air velocity on it was not so large. The pressure drop was affected remarkably by all experimental parameters in this study. Local heat flux distribution and frost thickness distribution on each fin were predicted from the measured fin temperatures and the mass and energy conservation equations on the frost surface and inside the frost layer. (author)

  20. RESTful NET

    CERN Document Server

    Flanders, Jon

    2008-01-01

    RESTful .NET is the first book that teaches Windows developers to build RESTful web services using the latest Microsoft tools. Written by Windows Communication Foundation (WFC) expert Jon Flanders, this hands-on tutorial demonstrates how you can use WCF and other components of the .NET 3.5 Framework to build, deploy and use REST-based web services in a variety of application scenarios. RESTful architecture offers a simpler approach to building web services than SOAP, SOA, and the cumbersome WS- stack. And WCF has proven to be a flexible technology for building distributed systems not necessa

  1. Investigation of transonic flow over segmented slotted wind tunnel wall with mass transfer

    Science.gov (United States)

    Bhat, M. K.; Vakili, A. D.; Wu, J. M.

    1990-01-01

    The flowfield on a segmented multi-slotted wind tunnel wall was studied at transonic speeds by measurements in and near the wall layer using five port cone probes. The slotted wall flowfield was observed to be three-dimensional in nature for a relatively significant distance above the slot. The boundary layer characteristics measured on the single slotted wall were found to be very sensitive to the applied suction through the slot. The perturbation in the velocity components generated due to the flow through the slot decay rapidly in the transverse direction. A vortex-like flow existed on the single slotted wall for natural ventilation but diminished with increased suction flow rate. For flow on a segmented multi-slotted wall, the normal velocity component changes were found to be maximum for measurement points located between the segmented slots atop the active chamber. The lateral influence due to applied suction and blowing, through a compartment, exceeded only slightly that in the downstream direction. Limited upstream influence was observed. Influence coefficients were determined from the data in the least-square sense for blowing and suction applied through one and two compartments. This was found to be an adequate determination of the influence coefficients for the range of mass flows considered.

  2. Flow characteristics and particle mass and number concentration variability within a busy urban street canyon

    Science.gov (United States)

    Weber, Stephan; Kuttler, Wilhelm; Weber, Konradin

    Mean and turbulent flow characteristics together with particle concentrations were measured in a busy urban street canyon in Essen, Germany, at five (flow characteristics) and three heights (particles) above ground, respectively. Particle mass and number concentrations were sampled in the size range 0.3< Dp<10 μm. The flow characteristics within the canyon were significantly influenced by canyon geometry and were shown to have significant impact on particle concentrations. During flow being directed perpendicular to the canyon a vortex circulation leads to a doubling of ambient particles when the measurement site is situated upwind to ambient flow. The vertical profiles of fine particles have maximum vertical differences of 12% between measurement levels. In the upper part of the canyon, concentrations decrease due to enhanced turbulence and mixing. Significant differences in the dynamics of particle number concentration for different size ranges are analysed. While submicron particles are inversely related to turbulence parameters, i.e. lower concentrations during enhanced turbulence, coarser particles (1< Dp<10 μm) are positively correlated to mixing within the canyon.

  3. Does Body Mass Index Influence Behavioral Regulations, Dispositional Flow and Social Physique Anxiety in Exercise Setting?

    Science.gov (United States)

    Ersöz, Gözde; Altiparmak, Ersin; Aşçı, F Hülya

    2016-06-01

    The purpose of this study was to examine differences in behavioral regulations, dispositional flow, social physique anxiety of exercisers in terms of body mass index (BMI). 782 university students participated in this study. Dispositional Flow State Scale-2, Behavioral Regulations in Exercise Questionnaire-2, Social Physique Anxiety Scale and Physical Activity Stages of Change Questionnaire were administered to participants. After controlling for gender, analysis indicated significant differences in behavioral regulations, dispositional flow and social physique anxiety of exercise participants with regards to BMI. In summary, the findings demonstrate that normal weighted participants exercise for internal reasons while underweighted participants are amotivated for exercise participation. Additionally, participants who are underweight had higher dispositional flow and lower social physique anxiety scores than other BMI classification. Key pointsNormal weighted participants exercise for internal reasons.Underweighted participants are amotivated for exercise participation.Underweighted participants had higher dispositional flow.Underweighted participants have lower social physique anxiety scores than normal weighted, overweight and obese participants.

  4. Determination of cholesterol and triglycerides in serum lipoproteins using flow field-flow fractionation coupled to gas chromatography-mass spectrometry

    NARCIS (Netherlands)

    Qureshi, R.N.; Kaal, E.; Janssen, H.-G.; Schoenmakers, P.J.; Kok, W.Th.

    2011-01-01

    Asymmetric flow field flow fractionation (AsFlFFF) was combined with pyrolysis-gas chromatography mass spectrometry for a sized based fractionation and a detailed compositional study of the triglycerides and cholesterol associated with the various lipoprotein subclasses present in human serum. Serum

  5. Accurate measurements of experimental parameters in supercritical fluid chromatography. I. Extent of variations of the mass and volumetric flow rates.

    Science.gov (United States)

    Tarafder, Abhijit; Guiochon, Georges

    2013-04-12

    Previous reports have highlighted the influence of the properties of the mobile phase flow rate on the column performance achieved in supercritical fluid chromatography (SFC). In SFC both the mass and the volumetric flow rates have unique influences on the chromatographic performance and the determination of their exact values is critical. It is well understood that the mass flow rate stays constant along an SFC system whereas the volumetric flow rate may vary considerably, but the extent of these variations and the role of the individual operating parameters in influencing these variations have not been clearly reported yet. The factors that control the mass and the volumetric flow rates in an SFC system are discussed and the possible extent of variations of these flow rates under different operating pressures and temperatures are demonstrate quantitatively. Copyright © 2013 Elsevier B.V. All rights reserved.

  6. The impact of mass drug administration and long-lasting insecticidal net distribution on Wuchereria bancrofti infection in humans and mosquitoes: an observational study in northern Uganda

    Directory of Open Access Journals (Sweden)

    Edwards Tansy

    2011-07-01

    Full Text Available Abstract Background Lymphatic filariasis (LF in Uganda is caused by Wuchereria bancrofti and transmitted by anopheline mosquitoes. The mainstay of elimination has been annual mass drug administration (MDA with ivermectin and albendazole, targeted to endemic districts, but has been sporadic and incomplete in coverage. Vector control could potentially contribute to reducing W. bancrofti transmission, speeding up progress towards elimination. To establish whether the use of long-lasting insecticidal nets (LLINs can contribute towards reducing transmission of W. bancrofti in a setting with ongoing MDA, a study was conducted in an area of Uganda highly endemic for both LF and malaria. Baseline parasitological and entomological assessments were conducted in 2007, followed by high-coverage LLIN distribution. Net use and entomological surveys were carried out after one year, and final parasitological and entomological evaluations were conducted in 2010. Three rounds of MDA had taken place before the study commenced, with a further three rounds completed during the course of the study. Results In 2007, rapid mapping indicated 22.3% of schoolchildren were W. bancrofti antigen positive, and a baseline survey during the same year found age-adjusted microfilaraemia prevalence was 3.7% (95% confidence interval (CI: 2.6-5.3%. In 2010, age-adjusted microfilaraemia prevalence had fallen to 0.4%, while antigenaemia rates were 0.2% in children W. bancrofti antigen (odds ratio = 0.44, 95% CI: 0.22-0.89. Prevalence of W. bancrofti larvae in anopheline mosquitoes had decreased significantly between the 2007 and 2010 surveys, but there was an apparent increase in vector densities. Conclusion A marked reduction in W. bancrofti infection and infectivity in humans was observed in the study area, where both MDA and LLINs were used to reduce transmission. The extent to which LLINs contributed to this decline is equivocal, however. Further work investigating the impact of

  7. Long lasting insecticidal bed nets ownership, access and use in a high malaria transmission setting before and after a mass distribution campaign in Uganda.

    Science.gov (United States)

    Wanzira, Humphrey; Eganyu, Thomas; Mulebeke, Ronald; Bukenya, Fred; Echodu, Dorothy; Adoke, Yeka

    2018-01-01

    Uganda is conducting a second mass LLIN distribution campaign and Katakwi district recently received LLINs as part of this activity. This study was conducted to measure the success of the campaign in this setting, an area of high transmission, with the objectives to estimate LLIN ownership, access and use pre and post campaign implementation. Two identical cross sectional surveys, based on the Malaria Indicator Survey methodology, were conducted in three sub-counties in this district (Kapujan, Magoro and Toroma), six months apart, one before and another after the mass distribution campaign. Data on three main LLIN indicators including; household LLIN ownership, population with access to an LLIN and use were collected using a household and a women's questionnaire identical to the Malaria Indicator Survey. A total of 601 and 607 households were randomly selected in survey one and two respectively. At baseline, 60.57% (56.53-64.50) of households owned at least one net for every two persons who stayed in the household the night before the survey which significantly increased to 70.35% (66.54-73.96) after the campaign (p = 0.001). Similarly, the percentage of the household population with access to an LLIN significantly increased from 84.76% (82.99-86.52) to 91.57% (90.33-92.81), p = 0.001 and the percentage of household population that slept under an LLIN the night before the survey also significantly increased from 56.85% (55.06-58.82) to 81.72% (76.75-83.21), p = 0.001. The LLIN mass campaign successfully achieved the national target of over eighty-five percent of the population with access to an LLIN in this setting, however, universal household coverage and use were fourteen and three percent points less than the national target respectively. This is useful for malaria programs to consider during the planning of future campaigns by tailoring efforts around deficient areas like mechanisms to increase universal coverage and behavior change communication.

  8. Analysis of Cattaneo-Christov heat and mass fluxes in the squeezed flow embedded in porous medium with variable mass diffusivity

    Directory of Open Access Journals (Sweden)

    M. Farooq

    Full Text Available This research article investigates the squeezing flow of Newtonian fluid with variable viscosity over a stretchable sheet inserted in Darcy porous medium. Cattaneo-Christov double diffusion models are implemented to scrutinize the characteristics of heat and mass transfer via variable thermal conductivity and variable mass diffusivity. These models are the modification of conventional laws of Fourier’s and Fick’s via thermal and solutal relaxation times respectively. The homotopy analysis Method (HAM is being utilized to provide the solution of highly nonlinear system of coupled partial differential equations after converted into dimensionless governing equations. The behavior of flow parameters on velocity, concentration, and temperature distributions are sketched and analyzed physically. The result indicates that both concentration and temperature distributions decay for higher solutal and thermal relaxation parameters respectively. Keywords: Squeezing flow, Porous medium, Variable viscosity, Cattaneo-Christov heat and mass flux models, Variable thermal conductivity, Variable mass diffusivity

  9. Petri Nets

    Indian Academy of Sciences (India)

    Associate Professor of. Computer Science and. Automation at the Indian. Institute of Science,. Bangalore. His research interests are broadly in the areas of stochastic modeling and scheduling methodologies for future factories; and object oriented modeling. GENERAL I ARTICLE. Petri Nets. 1. Overview and Foundations.

  10. Petri Nets

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 4; Issue 8. Petri Nets - Overview and Foundations. Y Narahari. General Article Volume 4 Issue 8 August 1999 pp ... Author Affiliations. Y Narahari1. Department ot Computer Science and Automation, Indian Institute of Science, Bangalore 560 012, India.

  11. Flow Control in a Transonic Diffuser through Mass and Vorticity Injection to Mitigate Massive Separation

    Science.gov (United States)

    Gartner, Jeremy

    generators, sweeping jets array, pulsed jets array, segmented jet, and 2-D steady and unsteady jets, which were placed at different streamwise locations relative to the separation point, and different throat widths in order to compare the effect of the momentum coefficient over the effect of the mass flow ratio. Note that the segmented jet and the 2-D jets were investigated under steady and unsteady injection with two different RMS values (low and high RMS). The highest pressure recovery achieved by the presence of the vortex generators was when they were erected into the flow at the height corresponding to the local boundary layer thickness (h/delta=1). The sweeping jets array achieved similar performance as the pulsed jets arrays. Moreover, they outperformed the 2-D jets, located at the same streamwise location, both in pressure recovery and in symmetry of the flow. The 2-D jet and the segmented jet located closer to the separation point (at x/L=0.25) resulted in a more efficient flow reattachment, resulting in a higher pressure recovery than for the 2-D jets located at the beginning of the ramp. Also, the effect of mass flow ratio and momentum coefficient was investigated, leading to the conclusion that both parameters are necessary to compare the effectiveness of flow control actuators. Furthermore, the 2-D jets and the segmented jet were investigated under two unsteady conditions--with a low RMS unsteady injection and a high RMS unsteady injection. Independently to the actuator, the steady jet consistently resulted in a slightly asymmetric flow field. Also, the low RMS unsteady jet performed slightly better than the steady jet, whereas the high RMS outperformed significantly the steady jet and the low RMS unsteady jet, independently to its actuation frequency. Moreover, the performances of the high RMS unsteady jet were consistently higher at an actuation frequency of 200 Hz, which corresponds to the shedding frequency of the separated flow. In addition, it was found

  12. Mass transfer from a circular cylinder: Effects of flow unsteadiness and slight nonuniformities

    Science.gov (United States)

    Marziale, M. L.; Mayle, R. E.

    1984-01-01

    Experiments were performed to determine the effect of periodic variations in the angle of the flow incident to a turbine blade on its leading edge heat load. To model this situation, measurements were made on a circular cylinder oscillating rotationally in a uniform steady flow. A naphthalene mass transfer technique was developed and used in the experiments and heat transfer rates are inferred from the results. The investigation consisted of two parts. In the first, a stationary cylinder was used and the transfer rate was measured for Re = 75,000 to 110,000 and turbulence levels from .34 percent to 4.9 percent. Comparisons with both theory and the results of others demonstrate that the accuracy and repeatability of the developed mass transfer technique is about + or - 2 percent, a large improvement over similar methods. In the second part identical flow conditions were used but the cylinder was oscillated. A Strouhal number range from .0071 to .1406 was covered. Comparisons of the unsteady and steady results indicate that the magnitude of the effect of oscillation is small and dependent on the incident turbulence conditions.

  13. Thermal Cracking Analysis during Pipe Cooling of Mass Concrete Using Particle Flow Code

    Directory of Open Access Journals (Sweden)

    Liang Li

    2016-01-01

    Full Text Available Pipe cooling systems are among the potentially effective measures to control the temperature of mass concrete. However, if not properly controlled, thermal cracking in concrete, especially near water pipes, might occur, as experienced in many mass concrete structures. In this paper, a new numerical approach to simulate thermal cracking based on particle flow code is used to shed more light onto the process of thermal crack propagation and the effect of thermal cracks on thermal fields. Key details of the simulation, including the procedure of obtaining thermal and mechanical properties of particles, are presented. Importantly, a heat flow boundary based on an analytical solution is proposed and used in particle flow code in two dimensions to simulate the effect of pipe cooling. The simulation results are in good agreement with the monitored temperature data and observations on cored specimens from a real concrete gravity dam, giving confidence to the appropriateness of the adopted simulation. The simulated results also clearly demonstrate why thermal cracks occur and how they propagate, as well as the influence of such cracks on thermal fields.

  14. Mass-corrections for the conservative coupling of flow and transport on collocated meshes

    Energy Technology Data Exchange (ETDEWEB)

    Waluga, Christian, E-mail: waluga@ma.tum.de [Institute for Numerical Mathematics (M2), Technische Universität München, Boltzmannstraße 3, D-85748 Garching bei München (Germany); Wohlmuth, Barbara [Institute for Numerical Mathematics (M2), Technische Universität München, Boltzmannstraße 3, D-85748 Garching bei München (Germany); Rüde, Ulrich [Department of Computer Science 10, University Erlangen–Nuremberg, Cauerstr. 11, D-91058 Erlangen (Germany)

    2016-01-15

    Buoyancy-driven flow models demand a careful treatment of the mass-balance equation to avoid spurious source and sink terms in the non-linear coupling between flow and transport. In the context of finite-elements, it is therefore commonly proposed to employ sufficiently rich pressure spaces, containing piecewise constant shape functions to obtain local or even strong mass-conservation. In three-dimensional computations, this usually requires nonconforming approaches, special meshes or higher order velocities, which make these schemes prohibitively expensive for some applications and complicate the implementation into legacy code. In this paper, we therefore propose a lean and conservatively coupled scheme based on standard stabilized linear equal-order finite elements for the Stokes part and vertex-centered finite volumes for the energy equation. We show that in a weak mass-balance it is possible to recover exact conservation properties by a local flux-correction which can be computed efficiently on the control volume boundaries of the transport mesh. We discuss implementation aspects and demonstrate the effectiveness of the flux-correction by different two- and three-dimensional examples which are motivated by geophysical applications.

  15. Coronal Mass Ejection Initiation by Converging Photospheric Flows: Toward a Realistic Model

    Science.gov (United States)

    Amari, T.; Aly, J.-J.; Luciani, J.-F.; Mikic, Z.; Linker, J.

    2011-12-01

    In the context of coronal mass ejections triggering, we reconsider the class of models in which the evolution of an active region (AR) is driven by imposed boundary motions converging toward the polarity inversion line (PIL). We introduce a new model problem in which there is a large-scale flow with a diverging structure on the photosphere. This flow is reminiscent of that of the well-known moat flow around each of the two spots of a bipolar AR and transports only part of the magnetic flux toward the PIL. It is thus more compatible with observations than the one used in our previous study, which forced the whole positive and negative polarity parts of the AR approaching each other. We also include a diffusion term associated with small-scale turbulent photospheric motions, but keep the associated diffusivity at a low value in the particular study described here. We show that the evolution of an initial sheared force-free field first leads to the formation of a twisted flux rope which stays in equilibrium for some time. Eventually, however, the configuration suffers a global disruption whose underlying mechanism is found by energetic considerations to be nonequilibrium. It begins indeed when the magnetic energy becomes of the order of the energy of an accessible partially open field. For triggering an eruption by converging flows, it is thus not necessary to advect the whole AR toward the PIL, but only its central part.

  16. Simulation of incompressible flows with heat and mass transfer using parallel finite element method

    Directory of Open Access Journals (Sweden)

    Jalal Abedi

    2003-02-01

    Full Text Available The stabilized finite element formulations based on the SUPG (Stream-line-Upwind/Petrov-Galerkin and PSPG (Pressure-Stabilization/Petrov-Galerkin methods are developed and applied to solve buoyancy-driven incompressible flows with heat and mass transfer. The SUPG stabilization term allows us to solve flow problems at high speeds (advection dominant flows and the PSPG term eliminates instabilities associated with the use of equal order interpolation functions for both pressure and velocity. The finite element formulations are implemented in parallel using MPI. In parallel computations, the finite element mesh is partitioned into contiguous subdomains using METIS, which are then assigned to individual processors. To ensure a balanced load, the number of elements assigned to each processor is approximately equal. To solve nonlinear systems in large-scale applications, we developed a matrix-free GMRES iterative solver. Here we totally eliminate a need to form any matrices, even at the element levels. To measure the accuracy of the method, we solve 2D and 3D example of natural convection flows at moderate to high Rayleigh numbers.

  17. Mass flow meter using the triboelectric effect for measurement in cryogenics

    Science.gov (United States)

    Bernatowicz, Henry; Cunningham, Jock; Wolff, Steve

    1987-01-01

    The use of triboelectric charge to measure the mass flow rate of cryogens for the Space Shuttle Main Engine was investigated. Cross correlation of the triboelectric charge signals was used to determine the transit time of the cryogen between two sensor locations in a .75-in tube. The ring electrode sensors were mounted in a removable spool piece. Three spool pieces were constructed for delivery, each with a different design. One set of electronics for implementation of the cross correlation and flow calculation was constructed for delivery. Tests were made using a laboratory flow loop using liquid freon and transformer oil. The measured flow precision was 1 percent and the response was linear. The natural frequency distribution of the triboelectric signal was approximately 1/f. The sensor electrodes should have an axial length less than approximately one/tenth pipe diameter. The electrode spacing should be less than approximately one pipe diameter. Tests using liquid nitrogen demonstrated poor tribo-signal to noise ratio. Most of the noise was microphonic and common to both electrode systems. The common noise rejection facility of the correlator was successful in compensating for this noise but the signal was too small to enable reliable demonstration of the technique in liquid nitrogen.

  18. Estimating the uncertainty of the liquid mass flow using the orifice plate

    Directory of Open Access Journals (Sweden)

    Golijanek-Jędrzejczyk Anna

    2017-01-01

    Full Text Available The article presents estimation of measurement uncertainty of a liquid mass flow using the orifice plate. This subject is essential because of the widespread use of this type of flow meters, which renders not only the quantitative estimation but also qualitative results of this type so those measurements are important. To achieve this goal, the authors of the paper propose to use the theory of uncertainty. The article shows the analysis of the measurement uncertainty using two methods: one based on the “Guide to the expression of uncertainty in measurement” (GUM of the International Organization for Standardization with the use of the law of propagation of uncertainty, and the second one using the Monte Carlo numerical method. The paper presents a comparative analysis of the results obtained with both of these methods.

  19. Filtered Mass Density Function for Large Eddy Simulation of Turbulent Reacting Flows

    Science.gov (United States)

    Jaberi, F. A.; Colucci, P. J.; James, S.; Givi, P.; Pope, S. B.

    1997-11-01

    A new methodology termed the ``filtered mass density function'' (FMDF) is developed and implemented for large eddy simulation (LES) of variable density chemically reacting turbulent flows at low Mach numbers. The FMDF represents the single point joint probability density function of the subgrid scale scalar quantities and is governed by its modeled transport equation. In this equation, the effects of chemical reaction appear in closed form but the influences of scalar mixing and convection within the subgrid are modeled. The stochastic differential equations (SDEs) which yield statistically equivalent results to that of the FMDF transport equation are derived and are solved via a Lagrangian Monte Carlo scheme. The consistency, the convergence, and the accuracy of FMDF and the Monte Carlo solution of its equivalent SDEs are demonstrated. The performance of the model is assessed by extensive comparisons with DNS and laboratory experimental data in two-dimensional (2D) and 3D reacting turbulent shear flows.

  20. Mass transport aspects of polymer electrolyte fuel cells under two-phase flow conditions

    Energy Technology Data Exchange (ETDEWEB)

    Kramer, D.

    2007-03-15

    This well-illustrated, comprehensive dissertation by Dr. Ing. Denis Kramer takes an in-depth look at polymer electrolyte fuel cells (PEFC) and the possibilities for their application. First of all, the operating principles of polymer electrolyte fuel cells are described and discussed, whereby thermodynamics aspects and loss mechanisms are examined. The mass transport diagnostics made with respect to the function of the cells are discussed. Field flow geometry, gas diffusion layers and, amongst other things, liquid distribution, the influence of flow direction and the low-frequency behaviour of air-fed PEFCs are discussed. Direct methanol fuel cells are examined, as are the materials chosen. The documentation includes comprehensive mathematical and graphical representations of the mechanisms involved.

  1. Heat and mass transfer from the mantle: heat flow and He-isotope constraints

    Directory of Open Access Journals (Sweden)

    B. G. Polyak

    2005-06-01

    Full Text Available Terrestrial heat flow density, q, is inversely correlated with the age, t, of tectono-magmatic activity in the Earth's crust (Polyak and Smirnov, 1966; etc.. «Heat flow-age dependence» indicates unknown temporal heat sources in the interior considered a priori as the mantle-derived diapirs. The validity of this hypothesis is demonstrated by studying the helium isotope ratio, 3He/4He = R, in subsurface fluids. This study discovered the positive correlation between the regionally averaged (background estimations of R- and q-values (Polyak et al., 1979a. Such a correlation manifests itself in both pan-regional scales (Norhtern Eurasia and separate regions, e.g., Japan (Sano et al., 1982, Eger Graben (Polyak et al., 1985 Eastern China rifts (Du, 1992, Southern Italy (Italiano et al., 2000, and elsewhere. The R-q relation indicates a coupled heat and mass transfer from the mantle into the crust. From considerations of heat-mass budget this transfer can be provided by the flux consisting of silicate matter rather than He or other volatiles. This conclusion is confirmed by the correlation between 3He/ 4He and 87Sr/86Sr ratios in the products of the volcanic and hydrothermal activity in Italy (Polyak et al., 1979b; Parello et al., 2000 and other places. Migration of any substance through geotemperature field transports thermal energy accumulated within this substance, i.e. represents heat and mass transfer. Therefore, only the coupled analysis of both material and energy aspects of this transfer makes it possible to characterise the process adequately and to decipher an origin of terrestrial heat flow observed in upper parts of the earth crust. An attempt of such kind is made in this paper.

  2. Windward fraction of the total mass or heat transport for flow past a circular cylinder

    Science.gov (United States)

    Gokoglu, S.; Rosner, D. E.

    1983-01-01

    The windward fraction of the total mass or heat transport for flow past a cylindrical aerodynamic object was estimated using the available experimental data for the angular distribution of the Nusselt transfer coefficient, Nu(theta, Re). The Re dependence of the windward surface fraction was calculated for the values of Re between 2 and 400,000. The results obtained from polar integrations of data from eight sources indicate that, for Reynolds numbers up to about 2000, more than 70 percent of the total transfer occurs on the windward surface. For the Re values above 100,000, the windward percentage is less than 50 percent.

  3. Tribocorrosion in pressurized high temperature water: a mass flow model based on the third body approach

    Energy Technology Data Exchange (ETDEWEB)

    Guadalupe Maldonado, S.

    2014-07-01

    Pressurized water reactors (PWR) used for power generation are operated at elevated temperatures (280-300 °C) and under higher pressure (120-150 bar). In addition to these harsh environmental conditions some components of the PWR assemblies are subject to mechanical loading (sliding, vibration and impacts) leading to undesirable and hardly controllable material degradation phenomena. In such situations wear is determined by the complex interplay (tribocorrosion) between mechanical, material and physical-chemical phenomena. Tribocorrosion in PWR conditions is at present little understood and models need to be developed in order to predict component lifetime over several decades. The goal of this project, carried out in collaboration with the French company AREVA NP, is to develop a predictive model based on the mechanistic understanding of tribocorrosion of specific PWR components (stainless steel control assemblies, stellite grippers). The approach taken here is to describe degradation in terms of electro-chemical and mechanical material flows (third body concept of tribology) from the metal into the friction film (i.e. the oxidized film forming during rubbing on the metal surface) and from the friction film into the environment instead of simple mass loss considerations. The project involves the establishment of mechanistic models for describing the single flows based on ad-hoc tribocorrosion measurements operating at low temperature. The overall behaviour at high temperature and pressure in investigated using a dedicated tribometer (Aurore) including electrochemical control of the contact during rubbing. Physical laws describing the individual flows according to defined mechanisms and as a function of defined physical parameters were identified based on the obtained experimental results and from literature data. The physical laws were converted into mass flow rates and solved as differential equation system by considering the mass balance in compartments

  4. Rapid detection of milk adulteration using intact protein flow injection mass spectrometric fingerprints combined with chemometrics.

    Science.gov (United States)

    Du, Lijuan; Lu, Weiying; Cai, Zhenzhen Julia; Bao, Lei; Hartmann, Christoph; Gao, Boyan; Yu, Liangli Lucy

    2018-02-01

    Flow injection mass spectrometry (FIMS) combined with chemometrics was evaluated for rapidly detecting economically motivated adulteration (EMA) of milk. Twenty-two pure milk and thirty-five counterparts adulterated with soybean, pea, and whey protein isolates at 0.5, 1, 3, 5, and 10% (w/w) levels were analyzed. The principal component analysis (PCA), partial least-squares-discriminant analysis (PLS-DA), and support vector machine (SVM) classification models indicated that the adulterated milks could successfully be classified from the pure milks. FIMS combined with chemometrics might be an effective method to detect possible EMA in milk. Copyright © 2017 Elsevier Ltd. All rights reserved.

  5. Viscous potential flow analysis of magnetohydrodynamic capillary instability with heat and mass transfer

    Directory of Open Access Journals (Sweden)

    D.K. Tiwari

    2015-09-01

    Full Text Available A linear analysis of capillary instability of a cylindrical interface in the presence of axial magnetic field has been carried out when there is heat and mass transfer across the interface. Both fluids are taken as incompressible, viscous and magnetic with different kinematic viscosities and different magnetic permeabilities. Viscous potential flow theory is used for the investigation and a dispersion relation that accounts for the growth of axisymmetric waves is derived. Stability criterion is given by critical value of applied magnetic field as well as critical wave number and stability is discussed theoretically as well as numerically. Various graphs are drawn showing the effect of various physical parameters such as magnetic field strength, heat transfer capillary number, and permeability ratio, on the stability of the system. It has been observed that the axial magnetic field and heat and mass transfer both have stabilizing effect on the stability of the system.

  6. Model simulation and experiments of flow and mass transport through a nano-material gas filter

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Xiaofan; Zheng, Zhongquan C.; Winecki, Slawomir; Eckels, Steve

    2013-11-01

    A computational model for evaluating the performance of nano-material packed-bed filters was developed. The porous effects of the momentum and mass transport within the filter bed were simulated. For the momentum transport, an extended Ergun-type model was employed and the energy loss (pressure drop) along the packed-bed was simulated and compared with measurement. For the mass transport, a bulk dsorption model was developed to study the adsorption process (breakthrough behavior). Various types of porous materials and gas flows were tested in the filter system where the mathematical models used in the porous substrate were implemented and validated by comparing with experimental data and analytical solutions under similar conditions. Good agreements were obtained between experiments and model predictions.

  7. Impact of mass distribution of free long-lasting insecticidal nets on childhood malaria morbidity: the Togo National Integrated Child Health Campaign.

    Science.gov (United States)

    Terlouw, Dianne J; Morgah, Kodjo; Wolkon, Adam; Dare, Aboudou; Dorkenoo, Ameyo; Eliades, M James; Vanden Eng, Jodi; Sodahlon, Yao K; ter Kuile, Feiko O; Hawley, William A

    2010-07-12

    An evaluation of the short-term impact on childhood malaria morbidity of mass distribution of free long-lasting insecticidal nets (LLINs) to households with children aged 9-59 months as part of the Togo National Integrated Child Health Campaign. The prevalence of anaemia and malaria in children aged zero to 59 months was measured during two cross-sectional household cluster-sample surveys conducted during the peak malaria transmission, three months before (Sept 2004, n=2521) and nine months after the campaign (Sept 2005, n=2813) in three districts representative of Togo's three epidemiological malaria transmission regions: southern tropical coastal plains (Yoto), central fertile highlands (Ogou) and northern semi-arid savannah (Tone). In households with children65% in all 3 districts. Reported ITN use by children during the previous night was 35.9%, 43.8% and 80.6% in Yoto, Ogou and Tone, respectively. Rainfall patterns were comparable in both years. The overall prevalence of moderate to severe anaemia (HbPR] 0.72, 95% CI 0.62-0.84) and mean haemoglobin was increased by 0.35 g/dL (95% CI 0.25-0.45).The effect was predominantly seen in children aged 18-59 months and in the two southern districts: PR (95% CI) for moderate to severe anaemia and clinical malaria: Yoto 0.62 (0.44-0.88) and 0.49 (0.35-0.75); Ogou 0.54 (0.37-0.79) and 0.85 (0.57-1.27), respectively. Similar reductions occurred in children<18 months in Ogou, but not in Yoto. No effect was seen in the semi-arid northern district despite a high malaria burden and ITN coverage. A marked reduction in childhood malaria associated morbidity was observed in the year following mass distribution of free LLINs in two of the three districts in Togo. Sub-national level impact evaluations will contribute to a better understanding of the impact of expanding national malaria control efforts.

  8. Numerical investigation on added mass and damping force coefficient of an underwater vehicle in cavitating flows

    Science.gov (United States)

    Wang, Z. Y.; Wang, G. Y.; Hu, C. L.; Cui, Z. Y.

    2015-01-01

    The objective of this paper is mainly to study the influence of cavitation on the added mass and damping force coefficient. Based on Reynolds averaged Navier-Stokes equations, the dynamic mesh is used to calculate the added mass, and the rotating coordinate frame method is applied to research on the damping force coefficient. In order to obtain fluid damping force coefficients, the movement pattern is set as a uniform circular motion. Then the additional force coefficient and pitch damping moment coefficient could be obtained using the method of least squares. The result shows that the method to calculate added mass is reliable by comparing with the analytical solution. With the cavitation number decreasing, the absolute value of the added mass of λ22 decreases and λ26 increases. What's more, both the absolute value of damping force and moment coefficient decrease substantially with the development of cavity when the cavitation number is larger than 0.45. However, with the cavitation number less than 0.45, the un-symmetric cavity is more prominent, the absolute value of damping force and moment coefficient increase slightly. This is probably caused by the strengthened pressure peak at the suction side induced by the re-entrant flow.

  9. Filtered mass density function for large-eddy simulation of turbulent reacting flows

    Science.gov (United States)

    Jaberi, F. A.; Colucci, P. J.; James, S.; Givi, P.; Pope, S. B.

    1999-12-01

    A methodology termed the ‘filtered mass density function’ (FMDF) is developed and implemented for large-eddy simulation (LES) of variable-density chemically reacting turbulent flows at low Mach numbers. This methodology is based on the extension of the ‘filtered density function’ (FDF) scheme recently proposed by Colucci et al. (1998) for LES of constant-density reacting flows. The FMDF represents the joint probability density function of the subgrid-scale (SGS) scalar quantities and is obtained by solution of its modelled transport equation. In this equation, the effect of chemical reactions appears in a closed form and the influences of SGS mixing and convection are modelled. The stochastic differential equations (SDEs) which yield statistically equivalent results to those of the FMDF transport equation are derived and are solved via a Lagrangian Monte Carlo scheme. The consistency, convergence, and accuracy of the FMDF and the Monte Carlo solution of its equivalent SDEs are assessed. In non-reacting flows, it is shown that the filtered results via the FMDF agree well with those obtained by the ‘conventional’ LES in which the finite difference solution of the transport equations of these filtered quantities is obtained. The advantage of the FMDF is demonstrated in LES of reacting shear flows with non-premixed reactants. The FMDF results are appraised by comparisons with data generated by direct numerical simulation (DNS) and with experimental measurements. In the absence of a closure for the SGS scalar correlations, the results based on the conventional LES are significantly different from those obtained by DNS. The FMDF results show a closer agreement with DNS. These results also agree favourably with laboratory data of exothermic reacting turbulent shear flows, and portray several of the features observed experimentally.

  10. Parametric amplification in a micro Coriolis mass flow sensor: reduction of power dissipation without loss of sensitivity

    NARCIS (Netherlands)

    Groenesteijn, Jarno; Droogendijk, H.; Wiegerink, Remco J.; Lammerink, Theodorus S.J.; Lötters, Joost Conrad; Sanders, Remco G.P.; Krijnen, Gijsbertus J.M.

    2013-01-01

    We report on the application of parametric amplification to a micro Coriolis mass flow sensor to reduce the system’s power dissipation while retaining sensitivity to flow. By reducing this power dissipation, less heat will be transferred to the fluid and channel, potentially resulting in more

  11. Quantitative estimation of the influence of external vibrations on the measurement error of a coriolis mass-flow meter

    NARCIS (Netherlands)

    van de Ridder, Bert; Hakvoort, Wouter; van Dijk, Johannes; Lötters, Joost Conrad; de Boer, Andries; Dimitrovova, Z.; de Almeida, J.R.

    2013-01-01

    In this paper the quantitative influence of external vibrations on the measurement value of a Coriolis Mass-Flow Meter for low flows is investigated, with the eventual goal to reduce the influence of vibrations. Model results are compared with experimental results to improve the knowledge on how

  12. Limits to diffusive O2 transport: flow, form, and function in nudibranch egg masses from temperate and polar regions.

    Directory of Open Access Journals (Sweden)

    Amy L Moran

    Full Text Available BACKGROUND: Many aquatic animals enclose embryos in gelatinous masses, and these embryos rely on diffusion to supply oxygen. Mass structure plays an important role in limiting or facilitating O2 supply, but external factors such as temperature and photosynthesis can play important roles as well. Other external factors are less well understood. METHODOLOGY/PRINCIPAL FINDINGS: We first explored the effects of water flow on O2 levels inside nudibranch embryo masses and compared the effects of flow on masses from temperate and polar regions. Water flow (still vs. vigorously bubbled had a strong effect on central O2 levels in all masses; in still water, masses were considerably more hypoxic than in bubbled water. This effect was stronger in temperate than in polar masses, likely due to the increased metabolic demand and O2 consumption of temperate masses. Second, we made what are to our knowledge the first measurements of O2 in invertebrate masses in the field. Consistent with laboratory experiments, O2 in Antarctic masses was high in masses in situ, suggesting that boundary-layer effects do not substantially limit O2 supply to polar embryos in the field. CONCLUSIONS/SIGNIFICANCE: All else being equal, boundary layers are more likely to depress O2 in masses in temperate or tropical regions; thus, selection on parents to choose high-flow sites for mass deposition is likely greater in warm water. Because of the large number of variables affecting diffusive O2 supply to embryos in their natural environment, field observations are necessary to test hypotheses generated from laboratory experiments and mathematical modeling.

  13. Flow of variably fluidized granular masses across three-dimensional terrain I. Coulomb mixture theory

    Science.gov (United States)

    Iverson, R.M.; Denlinger, R.P.

    2001-01-01

    Rock avalanches, debris flows, and related phenomena consist of grain-fluid mixtures that move across three-dimensional terrain. In all these phenomena the same basic forces, govern motion, but differing mixture compositions, initial conditions, and boundary conditions yield varied dynamics and deposits. To predict motion of diverse grain-fluid masses from initiation to deposition, we develop a depth-averaged, threedimensional mathematical model that accounts explicitly for solid- and fluid-phase forces and interactions. Model input consists of initial conditions, path topography, basal and internal friction angles of solid grains, viscosity of pore fluid, mixture density, and a mixture diffusivity that controls pore pressure dissipation. Because these properties are constrained by independent measurements, the model requires little or no calibration and yields readily testable predictions. In the limit of vanishing Coulomb friction due to persistent high fluid pressure the model equations describe motion of viscous floods, and in the limit of vanishing fluid stress they describe one-phase granular avalanches. Analysis of intermediate phenomena such as debris flows and pyroclastic flows requires use of the full mixture equations, which can simulate interaction of high-friction surge fronts with more-fluid debris that follows. Special numerical methods (described in the companion paper) are necessary to solve the full equations, but exact analytical solutions of simplified equations provide critical insight. An analytical solution for translational motion of a Coulomb mixture accelerating from rest and descending a uniform slope demonstrates that steady flow can occur only asymptotically. A solution for the asymptotic limit of steady flow in a rectangular channel explains why shear may be concentrated in narrow marginal bands that border a plug of translating debris. Solutions for static equilibrium of source areas describe conditions of incipient slope instability

  14. Ring waves as a mass transport mechanism in air-driven core-annular flows.

    Science.gov (United States)

    Camassa, Roberto; Forest, M Gregory; Lee, Long; Ogrosky, H Reed; Olander, Jeffrey

    2012-12-01

    Air-driven core-annular fluid flows occur in many situations, from lung airways to engineering applications. Here we study, experimentally and theoretically, flows where a viscous liquid film lining the inside of a tube is forced upwards against gravity by turbulent airflow up the center of the tube. We present results on the thickness and mean speed of the film and properties of the interfacial waves that develop from an instability of the air-liquid interface. We derive a long-wave asymptotic model and compare properties of its solutions with those of the experiments. Traveling wave solutions of this long-wave model exhibit evidence of different mass transport regimes: Past a certain threshold, sufficiently large-amplitude waves begin to trap cores of fluid which propagate upward at wave speeds. This theoretical result is then confirmed by a second set of experiments that show evidence of ring waves of annular fluid propagating over the underlying creeping flow. By tuning the parameters of the experiments, the strength of this phenomenon can be adjusted in a way that is predicted qualitatively by the model.

  15. MHD oscillatory channel flow, heat and mass transfer in a physiological fluid in presence of chemical reaction

    Directory of Open Access Journals (Sweden)

    J.C. Misra

    2016-03-01

    Full Text Available In the present paper, the problem of oscillatory MHD flow of blood in a porous arteriole in presence of chemical reaction and an external magnetic field has been investigated. Heat and mass transfer during arterial blood flow are also studied. A mathematical model is developed and analyzed by using appropriate mathematical techniques. Expressions for the velocity profile, volumetric flow rate, wall shear stress and rates of heat and mass transfer have been obtained. Variations of the said quantities with different parameters are computed by using MATHEMATICA software. The quantitative estimates are presented through graphs and table.

  16. Use of flow injection mass spectrometric fingerprinting and chemometrics for differentiation of three black cohosh species

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Huilian [Food Composition and Methods Development Laboratory, Beltsville Human Nutrition Research Center, Agricultural Research Service, U.S. Department of Agriculture, Beltsville, MD (United States); Key Laboratory of Modern Preparation of TCM, Jiangxi University of Traditional Chinese Medicine, Ministry of Education, Nanchang, Jiangxi Province (China); Sun, Jianghao [Food Composition and Methods Development Laboratory, Beltsville Human Nutrition Research Center, Agricultural Research Service, U.S. Department of Agriculture, Beltsville, MD (United States); McCoy, Joe-Ann [The North Carolina Arboretum Germplasm Repository, UNC Affiliate Campus, Asheville, NC (United States); Zhong, Haiyan [College of Food Science and Engineering, Central South University of Forestry and Technology, Changsha, Hunan Province (China); Fletcher, Edward J. [Strategic Sourcing, Inc., Banner Elk, NC 28604 (United States); Harnly, James, E-mail: harnly.james@ars.usda.gov [Food Composition and Methods Development Laboratory, Beltsville Human Nutrition Research Center, Agricultural Research Service, U.S. Department of Agriculture, Beltsville, MD (United States); Chen, Pei, E-mail: pei.chen@ars.usda.gov [Food Composition and Methods Development Laboratory, Beltsville Human Nutrition Research Center, Agricultural Research Service, U.S. Department of Agriculture, Beltsville, MD (United States)

    2015-03-01

    Flow injection mass spectrometry (FIMS) was used to provide chemical fingerprints of black cohosh (Actaea racemosa L.) in a manner of minutes by omitting the separation step. This method has proven to be a powerful tool for botanical authentication and in this study it was used to distinguish between three Actaea species prior to a more detailed chemical analysis using ultra high-performance liquid chromatography high-resolution mass spectrometry (UHPLC–HRMS). Black cohosh has become increasingly popular as a dietary supplement in the United States for the treatment of symptoms related to menopause. However, it has been known to be adulterated with the Asian Actaea dahurica (Turcz. ex Fisch. & C.A.Mey.) Franch. species (syn. Cimicifuga dahurica (Turcz.) Maxim). Existing methods for identification of black cohosh and differentiation of Actaea species are usually lengthy, laborious, and lack robustness, often based on the comparison of a few pre-selected components. Chemical fingerprints were obtained for 77 black cohosh samples and their related species using FIMS in the negative ion mode. The analysis time for each sample was less than 2 min. All data were processed using principal component analysis (PCA). FIMS fingerprints could readily differentiate all three species. Representative samples from each of the three species were further examined using UHPLC–MS to provide detailed profiles of the chemical differences between the three species and were compared to the PCA loadings. This study demonstrates a simple, fast, and easy analytical method that can be used to differentiate A. racemosa, Actaea podocarpa, and A. dahurica. - Highlights: • Flow injection mass spectrometry (FIMS) was used to provide chemical fingerprints of black cohosh (Actaea racemosa L.) in a manner of minutes by omitting the separation step. • FIMS can discriminate between A. dahurica, A. podocarpa, and A. racemosa. • FIMS is a valuable screening tool for authentication of botanicals.

  17. Multiple-relaxation-time lattice Boltzmann simulation for flow, mass transfer, and adsorption in porous media

    Science.gov (United States)

    Ma, Qiang; Chen, Zhenqian; Liu, Hao

    2017-07-01

    In this paper, to predict the dynamics behaviors of flow and mass transfer with adsorption phenomena in porous media at the representative elementary volume (REV) scale, a multiple-relaxation-time (MRT) lattice Boltzmann (LB) model for the convection-diffusion equation is developed to solve the transfer problem with an unsteady source term in porous media. Utilizing the Chapman-Enskog analysis, the modified MRT-LB model can recover the macroscopic governing equations at the REV scale. The coupled MRT-LB model for momentum and mass transfer is validated by comparing with the finite-difference method and the analytical solution. Moreover, using the MRT-LB method coupled with the linear driving force model, the fluid transfer and adsorption behaviors of the carbon dioxide in a porous fixed bed are explored. The breakthrough curve of adsorption from MRT-LB simulation is compared with the experimental data and the finite-element solution, and the transient concentration distributions of the carbon dioxide along the porous fixed bed are elaborated upon in detail. In addition, the MRT-LB simulation results show that the appearance time of the breakthrough point in the breakthrough curve is advanced as the mass transfer resistance in the linear driving force model increases; however, the saturation point is prolonged inversely.

  18. Heat and mass transfer analysis of unsteady MHD nanofluid flow through a channel with moving porous walls and medium

    Directory of Open Access Journals (Sweden)

    Muhammad Zubair Akbar

    2016-04-01

    Full Text Available The paper presents the numerical study of heat and mass transfer analysis in a viscous unsteady MHD nanofluid flow through a channel with porous walls and medium in the presence of metallic nanoparticles. The two cases for effective thermal conductivity are discussed in the analysis through H-C model. The impacts of the governing parameters on the flow, heat and mass transfer aspects of the issue are talked about. Under the patronage of small values of permeable Reynolds number and relaxation/contraction parameter, we locate that, when wall contraction is together with suction, flow turning is encouraged close to the wall where the boundary layer is shaped. On the other hand, when the wall relaxation is coupled with injection, the flow adjacent to the porous walls decreased. The outcome of the exploration may be beneficial for applications of biotechnology. Numerical solutions for the velocity, heat and mass transfer rate at the boundary are obtained and analyzed.

  19. Flow Boiling Heat Transfer in Two-Phase Micro Channel Heat Sink at Low Water Mass Flux

    Science.gov (United States)

    Kuznetsov, Vladimir V.; Shamirzaev, Alisher S.

    2009-08-01

    Boiling heat transfer at water flow with low mass flux in heat sink which contained rectangular microchannels was studied. The stainless steel heat sink contained ten parallel microchannels with a size of 640 × 2050 μm in cross-section with typical wall roughness of 10-15 μm. The local flow boiling heat transfer coefficients were measured at mass velocity of 17 and 51 kg/m2s, heat flux on 30 to 150 kW/m2 and vapor quality of up to 0.8 at pressure in the channels closed to atmospheric one. It was observed that Kandlikar nucleate boiling correlation is in good agreement with the experimental data at mass flow velocity of 85 kg/m2s. At smaller mass flux the Kandlikar model and Zhang, Hibiki and Mishima model demonstrate incorrect trend of heat transfer coefficients variation with vapor quality.

  20. Multiscale processes of the flow and non-equilibrium interphase heat and mass transfer self-organization in multiphase systems

    Directory of Open Access Journals (Sweden)

    Kuznetsov Vladimir V.

    2017-01-01

    Full Text Available Multiscale processes of self-organization of the flow and non-equilibrium heat and mass transfer during the separation of a binary mixture in a multiphase system formed by a structural packing and a counter-flow vapor-liquid flow are considered. The conditions for the appearance of large-scale convective flow during separation of the binary mixture of refrigerants R21-R114 in a distillation column with Koch 1Y structure packing are obtained. The physical properties of this mixture are similar to the properties of air component at cryogenic temperatures.

  1. The Theoretical Analysis of Mass and Energy Flow Through Solar Collector – Chimney System

    Directory of Open Access Journals (Sweden)

    Lipnicki Zygmunt

    2017-03-01

    Full Text Available The goal of the paper was to simplify the designing process for mass and energy flow through solar collector - chimney system. Theoretical analysis allowed to get involved system of three nonlinear analytical equations in dimensionless forms that have been saved. Dimensionless numbers for the problem are well known in the literature on fluid mechanics and thermodynamics: Reynolds, Grashof, Galileo, Biot and Prandtl. In the analyzed equations are also dimensionless geometric parameters expressing the ratios of basic geometrical dimensions of the collector system-chimney: the radius disc collector to the thickness gap, the height and radius of the chimney. In the system of equations, the Reynolds number is treated as the determined number, which is a novelty of the method used.

  2. Differentiating organic from conventional peppermints using chromatographic and flow injection mass spectrometric (FIMS) fingerprints.

    Science.gov (United States)

    Gao, Boyan; Lu, Yingjian; Qin, Fang; Chen, Pei; Shi, Haiming; Charles, Denys; Yu, Liangli Lucy

    2012-12-05

    High-performance liquid chromatography (HPLC) and flow injection mass spectrometric (FIMS) fingerprinting techniques were tested for their potential in differentiating organic and conventional peppermint samples. Ten organic and ten conventional peppermint samples were examined using HPLC-UV and FIMS methods. Principal component analysis (PCA) showed that both HPLC and FIMS fingerprints could determine the difference in the commercial organic and conventional peppermints. FIMS fingerprinting provided a rapid test to differentiate organic and conventional peppermints in 1 min of analysis and has potential for high-throughput applications. On the other hand, HPLC fingerprints provide more information about the chemical composition of the samples, but take a longer time to differentiate organic and conventional peppermint samples.

  3. Heat or mass transfer from a sphere in Stokes flow at low Péclet number

    KAUST Repository

    Bell, Christopher G.

    2013-04-01

    We consider the low Péclet number, Pe≪1, asymptotic solution for steady-state heat or mass transfer from a sphere immersed in Stokes flow with a Robin boundary condition on its surface, representing Newton cooling or a first-order chemical reaction. The application of Van Dyke\\'s rule up to terms of O(Pe3) shows that the O(Pe3logPe) terms in the expression for the average Nusselt/Sherwood number are twice those previously derived in the literature. Inclusion of the O(Pe3) terms is shown to increase the range of validity of the expansion. © 2012 Elsevier Ltd. All rights reserved.

  4. Real-time measurement of peroxyacetyl nitrate using selected ion flow tube mass spectrometry.

    Science.gov (United States)

    Hastie, Donald R; Gray, John; Langford, Vaughan S; Maclagan, Robert G A R; Milligan, Daniel B; McEwan, Murray J

    2010-02-01

    The on-line detection of gaseous peroxyacetyl nitrate (PAN) using selected ion flow tube mass spectrometry (SIFT-MS) has been investigated using a synthetic sample of PAN in air at a humidity of approximately 30%. Using the H(3)O(+) reagent ion, signals due to PAN at m/z 122, 77 and 95 have been identified. These correspond to protonated PAN, protonated peractetic acid and its water cluster, respectively. These products and their energetics have been probed through quantum mechanical calculations. The rate coefficient of H(3)O(+) has been estimated to be 4.5 x 10(-9) cm(3) s(-1), leading to a PAN sensitivity of 138 cps/ppbv. This gives a limit of detection of 20 pptv in 10 s using the [M+H](+) ion of PAN at m/z 122. Copyright 2010 John Wiley & Sons, Ltd.

  5. Technical characterization of dialysis fluid flow and mass transfer rate in dialyzers with various filtration coefficients using dimensionless correlation equation.

    Science.gov (United States)

    Fukuda, Makoto; Yoshimura, Kengo; Namekawa, Koki; Sakai, Kiyotaka

    2017-06-01

    The objective of the present study is to evaluate the effect of filtration coefficient and internal filtration on dialysis fluid flow and mass transfer coefficient in dialyzers using dimensionless mass transfer correlation equations. Aqueous solution of vitamin B12 clearances were obtained for REXEED-15L as a low flux dialyzer, and APS-15EA and APS-15UA as high flux dialyzers. All the other design specifications were identical for these dialyzers except for filtration coefficient. The overall mass transfer coefficient was calculated, moreover, the exponents of Reynolds number (Re) and film mass transfer coefficient of the dialysis-side fluid (k D) for each flow rate were derived from the Wilson plot and dimensionless correlation equation. The exponents of Re were 0.4 for the low flux dialyzer whereas 0.5 for the high flux dialyzers. Dialysis fluid of the low flux dialyzer was close to laminar flow because of its low filtration coefficient. On the other hand, dialysis fluid of the high flux dialyzers was assumed to be orthogonal flow. Higher filtration coefficient was associated with higher k D influenced by mass transfer rate through diffusion and internal filtration. Higher filtration coefficient of dialyzers and internal filtration affect orthogonal flow of dialysis fluid.

  6. A sensitivity analysis of the mass balance equation terms in subcooled flow boiling

    Energy Technology Data Exchange (ETDEWEB)

    Braz Filho, Francisco A.; Caldeira, Alexandre D.; Borges, Eduardo M., E-mail: fbraz@ieav.cta.br, E-mail: alexdc@ieav.cta.br, E-mail: eduardo@ieav.cta.br [Instituto de Estudos Avancados (IEAv), Sao Jose dos Campos, SP (Brazil). Div. de Energia Nuclear

    2013-07-01

    In a heated vertical channel, the subcooled flow boiling occurs when the fluid temperature reaches the saturation point, actually a small overheating, near the channel wall while the bulk fluid temperature is below this point. In this case, vapor bubbles are generated along the channel resulting in a significant increase in the heat flux between the wall and the fluid. This study is particularly important to the thermal-hydraulics analysis of Pressurized Water Reactors (PWRs). The computational fluid dynamics software FLUENT uses the Eulerian multiphase model to analyze the subcooled flow boiling. In a previous paper, the comparison of the FLUENT results with experimental data for the void fraction presented a good agreement, both at the beginning of boiling as in nucleate boiling at the end of the channel. In the region between these two points the comparison with experimental data was not so good. Thus, a sensitivity analysis of the mass balance equation terms, steam production and condensation, was performed. Factors applied to the terms mentioned above can improve the agreement of the FLUENT results to the experimental data. Void fraction calculations show satisfactory results in relation to the experimental data in pressures values of 15, 30 and 45 bars. (author)

  7. A Mass Conservation Scheme for Level Set Method Applied to Multiphase Incompressible Flows

    Science.gov (United States)

    Salih, A.; Ghosh Moulic, S.

    2013-06-01

    Despite the inherent advantages of the level set method in the computation of multiphase flows, the principal drawback has been the lack of conservation of mass (or volume in incompressible flows). While the level set community has resorted to the use of highly accurate schemes like a fifth-order Weighted Essentially Non-Oscillatory (WENO) scheme for the solution of level set equations, it is seen that for certain classes of problems the volume loss is still high. In order to circumvent this limitation of the level set method, in this paper we propose a volume-reinitialization scheme, wherein volume correction is accomplished by solving an appropriate equation for level set function after every time step. The volume-reinitialization scheme recognizes the local curvature of the interface while correcting the volume loss. The efficacy of the proposed technique has been tested for several problems that include determination of equilibrium shape of free surface in a rotating cylindrical container and simulation of zero-gravity drop oscillations. It is seen that there is a dramatic increase in the performance of the level set method when used in conjunction with volume-reinitialization and this strategy seems to hold promise for a wide class of problems.

  8. Importance of Added Mass and Damping in Flow-Induced Vibration Analysis of Tubes Bundle: An Overview

    Directory of Open Access Journals (Sweden)

    Faisal Karim Shami

    2012-01-01

    Full Text Available Flow-induced vibration is of prime concern to the designers of heat exchangers subjected to high flows of gases or liquids. Excessive vibration may cause tube failure due to fatigue or fretting-wear. Tube failure results in, expensive plant upholding and suffers loss of production. Therefore, tube failure due to unwarranted vibration must be avoided in process heat exchangers and nuclear steam generators, preferably at design stage. Such vibration problems may be avoided through a comprehensive flowinduced vibration analysis before fabrication of heat exchangers. However, it requires an understanding of vibration mechanism and parameters related to flow-induced vibration. For an accurate vibration analysis, it is of prime importance to have good estimates of structural and flow related dynamic parameters. Thus dynamic parameters such as added mass and damping are of significant concern in a flow regime. The purpose of this paper is to provide an overview of our state of knowledge and role of dynamic parameters in flow-induced vibration on tube bundles due to current trend of larger heat exchangers. The present paper provides published data, analysis, evaluation, formulation, and experimental studies related to hydrodynamic mass and damping by a large number of researchers. Guidelines for experimental research and heat exchangers design related to added mass and damping mechanisms subjected to both single and two-phase flow are outlined in this paper.

  9. Insights into interstitial flow, shear stress, and mass transport effects on ECM heterogeneity in bioreactor-cultivated engineered cartilage hydrogels.

    Science.gov (United States)

    Chen, Tony; Buckley, Mark; Cohen, Itai; Bonassar, Lawrence; Awad, Hani A

    2012-05-01

    Interstitial flow in articular cartilage is secondary to compressive and shear deformations during joint motion and has been linked with the well-characterized heterogeneity in structure and composition of its extracellular matrix. In this study, we investigated the effects of introducing gradients of interstitial flow on the evolution of compositional heterogeneity in engineered cartilage. Using a parallel-plate bioreactor, we observed that Poiseuille flow stimulation of chondrocyte-seeded agarose hydrogels led to an increase in glycosaminoglycan and type II collagen deposition in the surface region of the hydrogel exposed to flow. Experimental measurements of the interstitial flow fields based on the fluorescence recovery after photobleaching technique suggested that the observed heterogeneity in composition is associated with gradients in interstitial flow in a boundary layer at the hydrogel surface. Interestingly, the interstitial flow velocity profiles were nonlinearly influenced by flow rate, which upon closer examination led us to the original observation that the apparent hydrogel permeability decreased exponentially with increased interfacial shear stress. We also observed that interstitial flow enhances convective mass transport irrespective of molecular size within the boundary layer near the hydrogel surface and that the convective contribution to transport diminishes with depth in association with interstitial flow gradients. The implications of the nonlinearly inverse relationship between the interfacial shear stress and the interstitial flux and permeability and its consequences for convective transport are important for tissue engineering, since porous scaffolds comprise networks of Poiseuille channels (pores) through which interstitial flow must navigate under mechanical stimulation or direct perfusion.

  10. Mass transport aspects of polymer electrolyte fuel cells under two-phase flow conditions

    Energy Technology Data Exchange (ETDEWEB)

    Kramer, D.

    2007-03-27

    This work deals with selected aspects of mass transport phenomena in PEFCs and DMFCs. Emphasis is placed on the implications originating from the occurrence of two-phase flow within these devices. Optimality of supply, distribution, and removal of the fuel, the oxidant, and the reaction products is of utmost importance for the stability, efficiency, and durability of the devices. Being a prerequisite for high current densities while maintaining sufficient voltage, mass transport optimization contributes to the development of cost effective as well as compact designs and hence competitive fuel cells. [German] Die Visualisierung und Quantifizierung von Fluessigwasseransammlungen in Polymerelektrolytmembran-Brennstoffzellen konnte mittels Neutronenradiographie erreicht werden. Dank dieser neuartigen diagnostischen Methode konnte erstmals die Fluessigwasseransammlung in den poroesen Gasdiffusionsschichten direkt nachgewiesen und quantifiziert werden. Die Kombination von Neutronenradiographie mit ortsaufgeloesten Stromdichtemessungen bzw. lokaler Impedanzspektroskopie erlaubte die Korrelation des inhomogenen Fluessigwasseranfalls mit dem lokalen elektrochemischen Leistungsverhalten. Systematische Untersuchungen an Polymerelektrolyt- und Direkt-Methanol-Brennstoffzellen verdeutlichen sowohl den Einfluss von Betriebsbedingungen als auch die Auswirkung von Materialeigenschaften auf die Ausbildung zweiphasiger Stroemungen.

  11. Emerging flow injection mass spectrometry methods for high-throughput quantitative analysis.

    Science.gov (United States)

    Nanita, Sergio C; Kaldon, Laura G

    2016-01-01

    Where does flow injection analysis mass spectrometry (FIA-MS) stand relative to ambient mass spectrometry (MS) and chromatography-MS? Improvements in FIA-MS methods have resulted in fast-expanding uses of this technique. Key advantages of FIA-MS over chromatography-MS are fast analysis (typical run time method simplicity, and FIA-MS offers high-throughput without compromising sensitivity, precision and accuracy as much as ambient MS techniques. Consequently, FIA-MS is increasingly becoming recognized as a suitable technique for applications where quantitative screening of chemicals needs to be performed rapidly and reliably. The FIA-MS methods discussed herein have demonstrated quantitation of diverse analytes, including pharmaceuticals, pesticides, environmental contaminants, and endogenous compounds, at levels ranging from parts-per-billion (ppb) to parts-per-million (ppm) in very complex matrices (such as blood, urine, and a variety of foods of plant and animal origin), allowing successful applications of the technique in clinical diagnostics, metabolomics, environmental sciences, toxicology, and detection of adulterated/counterfeited goods. The recent boom in applications of FIA-MS for high-throughput quantitative analysis has been driven in part by (1) the continuous improvements in sensitivity and selectivity of MS instrumentation, (2) the introduction of novel sample preparation procedures compatible with standalone mass spectrometric analysis such as salting out assisted liquid-liquid extraction (SALLE) with volatile solutes and NH4(+) QuEChERS, and (3) the need to improve efficiency of laboratories to satisfy increasing analytical demand while lowering operational cost. The advantages and drawbacks of quantitative analysis by FIA-MS are discussed in comparison to chromatography-MS and ambient MS (e.g., DESI, LAESI, DART). Generally, FIA-MS sits 'in the middle' between ambient MS and chromatography-MS, offering a balance between analytical capability and

  12. Acceleration of Gas Flow Simulations in Dual-Continuum Porous Media Based on the Mass-Conservation POD Method

    KAUST Repository

    Wang, Yi

    2017-09-12

    Reduced-order modeling approaches for gas flow in dual-porosity dual-permeability porous media are studied based on the proper orthogonal decomposition (POD) method combined with Galerkin projection. The typical modeling approach for non-porous-medium liquid flow problems is not appropriate for this compressible gas flow in a dual-continuum porous media. The reason is that non-zero mass transfer for the dual-continuum system can be generated artificially via the typical POD projection, violating the mass-conservation nature and causing the failure of the POD modeling. A new POD modeling approach is proposed considering the mass conservation of the whole matrix fracture system. Computation can be accelerated as much as 720 times with high precision (reconstruction errors as slow as 7.69 × 10−4%~3.87% for the matrix and 8.27 × 10−4%~2.84% for the fracture).

  13. Raster-Mode Continuous-Flow Liquid Microjunction Mass Spectrometry Imaging of Proteins in Thin Tissue Sections.

    Science.gov (United States)

    Griffiths, Rian L; Randall, Elizabeth C; Race, Alan M; Bunch, Josephine; Cooper, Helen J

    2017-06-06

    Mass spectrometry imaging by use of continuous-flow liquid microjunction sampling at discrete locations (array mode) has previously been demonstrated. In this Letter, we demonstrate continuous-flow liquid microjunction mass spectrometry imaging of proteins from thin tissue sections in raster mode and discuss advantages (a 10-fold reduction in analysis time) and challenges (suitable solvent systems, data interpretation) of the approach. Visualization of data is nontrivial, requiring correlation of solvent-flow, mass spectral data acquisition rate, data quality, and liquid microjunction sampling area. The latter is particularly important for determining optimum pixel size. The minimum achievable pixel size is related to the scan time of the instrument used. Here we show a minimum achievable pixel size of 50 μm (x-dimension) when using an Orbitrap Elite; however a pixel size of 600 μm is recommended in order to minimize the effects of oversampling on image accuracy.

  14. Numerical study for nanofluid flow due to a nonlinear curved stretching surface with convective heat and mass conditions

    Directory of Open Access Journals (Sweden)

    Tasawar Hayat

    Full Text Available This article presents the simultaneous effects of convective heat and mass conditions in boundary-layer flow of nanoliquid due to a nonlinear curved stretching surface. A nonlinear curved stretching surface is used to generate the flow. Thermophoretic diffusion and random motion features are also incorporated. Convective heat and mass conditions are imposed at boundary. Suitable variables are utilized to convert the nonlinear partial differential system into nonlinear ordinary differential system. The obtained nonlinear systems are solved numerically through shooting technique. Plots are displayed in order to explore the role of physical flow variables on the solutions. The skin-friction coefficient and local Nusselt and Sherwood numbers are computed and examined. Our findings indicate that the local Nusselt and Sherwood numbers are reduced for larger values of thermophoresis parameter. Keywords: Nonlinear curved stretching surface, Nanoparticles, Convective heat and mass conditions, Numerical solution

  15. MASS TRANSFER CONTROL OF A BACKWARD-FACING STEP FLOW BY LOCAL FORCING- EFFECT OF REYNOLDS NUMBER

    Directory of Open Access Journals (Sweden)

    Zouhaier MEHREZ

    2011-01-01

    Full Text Available The control of fluid mechanics and mass transfer in separated and reattaching flow over a backward-facing step by a local forcing, is studied using Large Eddy Simulation (LES.To control the flow, the local forcing is realized by a sinusoidal oscillating jet at the step edge. The Reynolds number is varied in the range 10000 ≤ Re≤ 50000 and the Schmidt number is fixed at 1.The found results show that the flow structure is modified and the local mass transfer is enhanced by the applied forcing. The observed changes depend on the Reynolds number and vary with the frequency and amplitude of the local forcing. For the all Reynolds numbers, the largest recirculation zone size reduction is obtained at the optimum forcing frequency St = 0.25. At this frequency the local mass transfer enhancement attains the maximum.

  16. The effect of water temperature and flow on respiration in barnacles: patterns of mass transfer versus kinetic limitation.

    Science.gov (United States)

    Nishizaki, Michael T; Carrington, Emily

    2014-06-15

    In aquatic systems, physiological processes such as respiration, photosynthesis and calcification are potentially limited by the exchange of dissolved materials between organisms and their environment. The nature and extent of physiological limitation is, therefore, likely to be dependent on environmental conditions. Here, we assessed the metabolic sensitivity of barnacles under a range of water temperatures and velocities, two factors that influence their distribution. Respiration rates increased in response to changes in temperature and flow, with an interaction where flow had less influence on respiration at low temperatures, and a much larger effect at high temperatures. Model analysis suggested that respiration is mass transfer limited under conditions of low velocity (temperature (20-25°C). In contrast, limitation by uptake reaction kinetics, when the biotic capacity of barnacles to absorb and process oxygen is slower than its physical delivery by mass transport, prevailed at high flows (40-150 cm s(-1)) and low temperatures (5-15°C). Moreover, there are intermediate flow-temperature conditions where both mass transfer and kinetic limitation are important. Behavioral monitoring revealed that barnacles fully extend their cirral appendages at low flows and display abbreviated 'testing' behaviors at high flows, suggesting some form of mechanical limitation. In low flow-high temperature treatments, however, barnacles displayed distinct 'pumping' behaviors that may serve to increase ventilation. Our results suggest that in slow-moving waters, respiration may become mass transfer limited as temperatures rise, whereas faster flows may serve to ameliorate the effects of elevated temperatures. Moreover, these results underscore the necessity for approaches that evaluate the combined effects of multiple environmental factors when examining physiological and behavioral performance. © 2014. Published by The Company of Biologists Ltd.

  17. Effects of heat and mass transfer on unsteady boundary layer flow of a chemical reacting Casson fluid

    Science.gov (United States)

    Khan, Kashif Ali; Butt, Asma Rashid; Raza, Nauman

    2018-03-01

    In this study, an endeavor is to observe the unsteady two-dimensional boundary layer flow with heat and mass transfer behavior of Casson fluid past a stretching sheet in presence of wall mass transfer by ignoring the effects of viscous dissipation. Chemical reaction of linear order is also invoked here. Similarity transformation have been applied to reduce the governing equations of momentum, energy and mass into non-linear ordinary differential equations; then Homotopy analysis method (HAM) is applied to solve these equations. Numerical work is done carefully with a well-known software MATHEMATICA for the examination of non-dimensional velocity, temperature, and concentration profiles, and then results are presented graphically. The skin friction (viscous drag), local Nusselt number (rate of heat transfer) and Sherwood number (rate of mass transfer) are discussed and presented in tabular form for several factors which are monitoring the flow model.

  18. Asymptotic behavior of the mixed mass in Rayleigh–Taylor and Richtmyer–Meshkov instability induced flows

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Ye; Cabot, William H. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Thornber, Ben [The University of Sydney, School of Aerospace, Mechanical and Mechatronic Engineering, New South Wales 2006, Sydney (Australia)

    2016-05-15

    Rayleigh–Taylor instability (RTI) and Richtmyer–Meshkov instability (RMI) are serious practical issues in inertial confinement fusion research, and also have relevance to many cases of astrophysical fluid dynamics. So far, much of the attention has been paid to the late-time scaling of the mixed width, which is used as a surrogate to how well the fluids have been mixed. Yet, the actual amount of mixed mass could be viewed as a more direct indicator on the evolution of the mixing layers due to hydrodynamic instabilities. Despite its importance, there is no systematic study as yet on the scaling of the mixed mass for either the RTI or the RMI induced flow. In this article, the normalized mixed mass (Ψ) is introduced for measuring the efficiency of the mixed mass. Six large numerical simulation databases have been employed: the RTI cases with heavy-to-light fluid density ratios of 1.5, 3, and 9; the single shock RMI cases with density ratios of 3 and 20; and a reshock RMI case with density ratio of 3. Using simulated flow fields, the normalized mixed mass Ψ is shown to be more sensitive in discriminating the variation with Atwood number for the RTI flows. Moreover, Ψ is demonstrated to provide more consistent results for both the RTI and RMI flows when compared with the traditional mixedness parameters, Ξ and Θ.

  19. Comprehensive theory of the Deans' switch as a variable flow splitter: fluid mechanics, mass balance, and system behavior.

    Science.gov (United States)

    Boeker, Peter; Leppert, Jan; Mysliwietz, Bodo; Lammers, Peter Schulze

    2013-10-01

    The Deans' switch is an effluent switching device based on controlling flows of carrier gas instead of mechanical valves in the analytical flow path. This technique offers high inertness and a wear-free operation. Recently new monolithic microfluidic devices have become available. In these devices the whole flow system is integrated into a small metal device with low thermal mass and leak-tight connections. In contrast to a mechanical valve-based system, a flow-controlled system is more difficult to calculate. Usually the Deans' switch is used to switch one inlet to one of two outlets, by means of two auxiliary flows. However, the Deans' switch can also be used to deliver the GC effluent with a specific split ratio to both outlets. The calculation of the split ratio of the inlet flow to the two outlets is challenging because of the asymmetries of the flow resistances. This is especially the case, if one of the outlets is a vacuum device, such as a mass spectrometer, and the other an atmospheric detector, e.g. a flame ionization detector (FID) or an olfactory (sniffing) port. The capillary flows in gas chromatography are calculated with the Hagen-Poiseuille equation of the laminar, isothermal and compressible flow in circular tubes. The flow resistances in the new microfluidic devices have to be calculated with the corresponding equation for rectangular cross-section microchannels. The Hagen-Poiseuille equation underestimates the flow to a vacuum outlet. A corrected equation originating from the theory of rarefied flows is presented. The calculation of pressures and flows of a Deans' switch based chromatographic system is done by the solution of mass balances. A specific challenge is the consideration of the antidiffusion resistor between the two auxiliary gas lines of the Deans' switch. A full solution for the calculation of the Deans' switch including this restrictor is presented. Results from validation measurements are in good accordance with the developed

  20. Analysis of perfluoroalkyl substances in cord blood by turbulent flow chromatography coupled to tandem mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Llorca, Marta; Perez, Francisca [Department of Environmental Chemistry, IDAEA-CSIC, Barcelona (Spain); Farre, Marinella, E-mail: mfuqam@cid.csic.es [Department of Environmental Chemistry, IDAEA-CSIC, Barcelona (Spain); Agramunt, Silvia [Centre for Research in Environmental Epidemiology (CREAL), Barcelona (Spain); IMIM (Hospital del Mar Research Institute), Barcelona (Spain); Kogevinas, Manolis [Centre for Research in Environmental Epidemiology (CREAL), Barcelona (Spain); IMIM (Hospital del Mar Research Institute), Barcelona (Spain); CIBER Epidemiologia y Salud Publica (CIBERESP), Barcelona (Spain); National School of Public Health, Athens (Greece); Barcelo, Damia [Department of Environmental Chemistry, IDAEA-CSIC, Barcelona (Spain); Catalan Institute for Water Research (ICRA), Girona (Spain); King Saud University, Riyadh (Saudi Arabia)

    2012-09-01

    A fast on-line analytical method based on turbulent flow chromatography (TFC) in combination with tandem mass spectrometry has been applied for the first time for the analysis of eighteen perfluoroalkyl substances (PFASs), in cord blood. A simple and rapid sample pre-treatment was optimised consisting on protein precipitation of 100 {mu}L of sample with acetonitrile (1:1) followed by centrifugation during 10 min. The method was adapted to be sensitive enough and robust with minimum sample injection volume requirements (20 {mu}L). The optimised methodology presented method limits of detection (MLOD) between 0.031 and 0.76 {mu}g/L, detection capabilities (CC{alpha}) in the range between 0.005 and 0.99 {mu}g/L and decision limits (CC{beta}) ranging from 0.006 to 1.16 {mu}g/L. The recoveries in blank blood were calculated by spiking experiments with a mixture of 18 PFASs and established between 70 and 126% for most of compounds. Isotopic dilution was carried out for quantification of selected analytes. In-house validation of this new approach was carried out according to the requirements in the 2002/657/EC Decision. Finally the good applicability of this new approach was proved by the analysis of 60 cord blood samples from two different Mediterranean cities, Barcelona (Spain) and Heraklion (Greece). Ions perfluorohexanesulfonate (PFHxS) and perfluorooctanesulfonate (PFOS) were found at highest concentration and the more frequently compounds were PFHxS, PFOS and perfluorooctanoic acid (PFOA). The newly developed method proved to be suitable for large-scale epidemiologic studies, and to the data on PFASs exposure during pregnancy. -- Highlights: Black-Right-Pointing-Pointer An on-line method has been developed for the analysis of 18 perfluoroalkyl substances. Black-Right-Pointing-Pointer The method is based on turbulent flow chromatography tandem mass spectrometry. Black-Right-Pointing-Pointer The method was applied in 60 cord blood samples from 2 Mediterranean cities

  1. Estimating Snow Mass and Peak River Flows for the Mackenzie River Basin Using GRACE Satellite Observations

    Directory of Open Access Journals (Sweden)

    Shusen Wang

    2017-03-01

    Full Text Available Flooding is projected to increase with climate change in many parts of the world. Floods in cold regions are commonly a result of snowmelt during the spring break-up. The peak river flow (Qpeak for the Mackenzie River, located in northwest Canada, is modelled using the Gravity Recovery and Climate Experiment (GRACE satellite observations. Compared with the observed Qpeak at a downstream hydrometric station, the model results have a correlation coefficient of 0.83 (p < 0.001 and a mean absolute error of 6.5% of the mean observed value of 28,400 m3·s−1 for the 12 study years (2003–2014. The results are compared with those for other basins to examine the difference in the major factors controlling the Qpeak. It was found that the temperature variations in the snowmelt season are the principal driver for the Qpeak in the Mackenzie River. In contrast, the variations in snow accumulation play a more important role in the Qpeak for warmer southern basins in Canada. The study provides a GRACE-based approach for basin-scale snow mass estimation, which is largely independent of in situ observations and eliminates the limitations and uncertainties with traditional snow measurements. Snow mass estimated from the GRACE data was about 20% higher than that from the Global Land Data Assimilation System (GLDAS datasets. The model is relatively simple and only needs GRACE and temperature data for flood forecasting. It can be readily applied to other cold region basins, and could be particularly useful for regions with minimal data.

  2. Use of flow injection mass spectrometric fingerprinting and chemometrics for differentiation of three black cohosh species

    Science.gov (United States)

    Huang, Huilian; Sun, Jianghao; McCoy, Joe-Ann; Zhong, Haiyan; Fletcher, Edward J.; Harnly, James; Chen, Pei

    2015-03-01

    Flow injection mass spectrometry (FIMS) was used to provide chemical fingerprints of black cohosh (Actaea racemosa L.) in a manner of minutes by omitting the separation step. This method has proven to be a powerful tool for botanical authentication and in this study it was used to distinguish between three Actaea species prior to a more detailed chemical analysis using ultra high-performance liquid chromatography high-resolution mass spectrometry (UHPLC-HRMS). Black cohosh has become increasingly popular as a dietary supplement in the United States for the treatment of symptoms related to menopause. However, it has been known to be adulterated with the Asian Actaea dahurica (Turcz. ex Fisch. & C.A.Mey.) Franch. species (syn. Cimicifuga dahurica (Turcz.) Maxim). Existing methods for identification of black cohosh and differentiation of Actaea species are usually lengthy, laborious, and lack robustness, often based on the comparison of a few pre-selected components. Chemical fingerprints were obtained for 77 black cohosh samples and their related species using FIMS in the negative ion mode. The analysis time for each sample was less than 2 min. All data were processed using principal component analysis (PCA). FIMS fingerprints could readily differentiate all three species. Representative samples from each of the three species were further examined using UHPLC-MS to provide detailed profiles of the chemical differences between the three species and were compared to the PCA loadings. This study demonstrates a simple, fast, and easy analytical method that can be used to differentiate A. racemosa, Actaea podocarpa, and A. dahurica.

  3. In silico approaches to study mass and energy flows in microbial consortia: a syntrophic case study

    Directory of Open Access Journals (Sweden)

    Mallette Natasha

    2009-12-01

    Full Text Available Abstract Background Three methods were developed for the application of stoichiometry-based network analysis approaches including elementary mode analysis to the study of mass and energy flows in microbial communities. Each has distinct advantages and disadvantages suitable for analyzing systems with different degrees of complexity and a priori knowledge. These approaches were tested and compared using data from the thermophilic, phototrophic mat communities from Octopus and Mushroom Springs in Yellowstone National Park (USA. The models were based on three distinct microbial guilds: oxygenic phototrophs, filamentous anoxygenic phototrophs, and sulfate-reducing bacteria. Two phases, day and night, were modeled to account for differences in the sources of mass and energy and the routes available for their exchange. Results The in silico models were used to explore fundamental questions in ecology including the prediction of and explanation for measured relative abundances of primary producers in the mat, theoretical tradeoffs between overall productivity and the generation of toxic by-products, and the relative robustness of various guild interactions. Conclusion The three modeling approaches represent a flexible toolbox for creating cellular metabolic networks to study microbial communities on scales ranging from cells to ecosystems. A comparison of the three methods highlights considerations for selecting the one most appropriate for a given microbial system. For instance, communities represented only by metagenomic data can be modeled using the pooled method which analyzes a community's total metabolic potential without attempting to partition enzymes to different organisms. Systems with extensive a priori information on microbial guilds can be represented using the compartmentalized technique, employing distinct control volumes to separate guild-appropriate enzymes and metabolites. If the complexity of a compartmentalized network creates an

  4. High-Precision Mass Measurement of Cu 56 and the Redirection of the r p -Process Flow

    Science.gov (United States)

    Valverde, A. A.; Brodeur, M.; Bollen, G.; Eibach, M.; Gulyuz, K.; Hamaker, A.; Izzo, C.; Ong, W.-J.; Puentes, D.; Redshaw, M.; Ringle, R.; Sandler, R.; Schwarz, S.; Sumithrarachchi, C. S.; Surbrook, J.; Villari, A. C. C.; Yandow, I. T.

    2018-01-01

    We report the mass measurement of Cu 56 , using the LEBIT 9.4 T Penning trap mass spectrometer at the National Superconducting Cyclotron Laboratory at Michigan State University. The mass of Cu 56 is critical for constraining the reaction rates of the Ni 55 (p ,γ ) Cu 56 (p ,γ ) Zn 57 (β+) Cu 57 bypass around the Ni 56 waiting point. Previous recommended mass excess values have disagreed by several hundred keV. Our new value, ME =-38 626.7 (7.1 ) keV , is a factor of 30 more precise than the extrapolated value suggested in the 2012 atomic mass evaluation [Chin. Phys. C 36, 1603 (2012), 10.1088/1674-1137/36/12/003], and more than a factor of 12 more precise than values calculated using local mass extrapolations, while agreeing with the newest 2016 atomic mass evaluation value [Chin. Phys. C 41, 030003 (2017), 10.1088/1674-1137/41/3/030003]. The new experimental average, using our new mass and the value from AME2016, is used to calculate the astrophysical Ni 55 (p ,γ ) and Cu 56 (p ,γ ) forward and reverse rates and perform reaction network calculations of the r p process. These show that the r p -process flow redirects around the Ni 56 waiting point through the Ni 55 (p ,γ ) route, allowing it to proceed to higher masses more quickly and resulting in a reduction in ashes around this waiting point and an enhancement to higher-mass ashes.

  5. Continuous-flow isotope ratio mass spectrometry method for carbon and hydrogen isotope measurements on atmospheric methane

    NARCIS (Netherlands)

    Brass, M.|info:eu-repo/dai/nl/304823600; Roeckmann, T.|info:eu-repo/dai/nl/304838233

    2010-01-01

    We describe a continuous-flow isotope ratio mass spectrometry (CF-IRMS) technique for high-precision δD and δ13C measurements of atmospheric methane on 40 mL air samples. CH4 is separated from other air components by utilizing purely physical processes based on temperature, time and mechanical valve

  6. Effect of diffusional mass transfer on the performance of horizontal subsurface flow constructed wetlands in tropical climate conditions.

    Science.gov (United States)

    Njau, K N; Gastory, L; Eshton, B; Katima, J H Y; Minja, R J A; Kimwaga, R; Shaaban, M

    2011-01-01

    The effect of mass transfer on the removal rate constants of BOD5, NH3, NO3 and TKN has been investigated in a Horizontal Subsurface Flow Constructed Wetland (HSSFCW) planted with Phragmites mauritianus. The plug flow model was assumed and the inlet and outlet concentrations were used to determine the observed removal rate constants. Mass transfer effects were studied by assessing the influence of interstitial velocity on pollutant removal rates in CW cells of different widths. The flow velocities varied between 3-46 m/d. Results indicate that the observed removal rate constants are highly influenced by the flow velocity. Correlation of dimensionless groups namely Reynolds Number (Re), Sherwood Number (Sh) and Schmidt Number (Sc) were applied and log-log plots of rate constants against velocity yielded straight lines with values beta = 0.87 for BOD5, 1.88 for NH3, 1.20 for NO3 and 0.94 for TKN. The correlation matched the expected for packed beds although the constant beta was higher than expected for low Reynolds numbers. These results indicate that the design values of rate constants used to size wetlands are influenced by flow velocity. This paper suggests the incorporation of mass transfer into CW design procedures in order to improve the performance of CW systems and reduce land requirements.

  7. Taguchi Method for Development of Mass Flow Rate Correlation using Hydrocarbon Refrigerant Mixture in Capillary Tube

    Directory of Open Access Journals (Sweden)

    Shodiya Sulaimon

    2014-07-01

    Full Text Available The capillary tube is an important control device used in small vapor compression refrigeration systems such as window air-conditioners, household refrigerators and freezers. This paper develops a non-dimensional correlation based on the test results of the adiabatic capillary tube for the mass flow rate through the tube using a hydrocarbon refrigerant mixture of 89.3% propane and 10.7% butane (HCM. The Taguchi method, a statistical experimental design approach, was employed. This approach explores the economic benefit that lies in studies of this nature, where only a small number of experiments are required and yet valid results are obtained. Considering the effects of the capillary tube geometry and the inlet condition of the tube, dimensionless parameters were chosen. The new correlation was also based on the Buckingham Pi theorem. This correlation predicts 86.67% of the present experimental data within a relative deviation of -10% to +10%. The predictions by this correlation were also compared with results in published literature.

  8. Quantification of methanol in the presence of ethanol by selected ion flow tube mass spectrometry.

    Science.gov (United States)

    Chambers-Bédard, Catherine; Ross, Brian M

    The quantification of trace compounds in alcoholic beverages is a useful means to both investigate the chemical basis of beverage flavor and to facilitate quality control during the production process. One compound of interest is methanol which, due to it being toxic, must not exceed regulatory limits. The analysis of headspace gases is a desirable means to do this since it does not require direct sampling of the liquid material. One established means to conduct headspace analysis is selected ion flow tube mass spectrometry (SIFT-MS). The high concentration of ethanol present in the headspace of alcoholic drinks complicates the analysis, however, via reacting with the precursor ions central to this technique. We therefore investigated whether methanol could be quantified in the presence of a large excess of ethanol using SIFT-MS. We found that methanol reacted with ionized ethanol to generate product ions that could be used to quantify methanol concentrations and used this technique to quantify methanol in beverages containing different quantities of ethanol. We conclude that SIFT-MS can be used to quantify trace compounds in alcoholic beverages by determining the relevant reaction chemistry.

  9. Mass Transfer Measurements behind an Orifice in a Circular Pipe Flow for Various Combinations of Swirl Intensity and Orifice Bias

    Science.gov (United States)

    Takano, Tsuyoshi; Yamagata, Takayuki; Ito, Akihiro; Fujisawa, Nobuyuki

    A pipe-wall thinning phenomenon behind an orifice in a circular pipe is studied by measuring the mass transfer using the naphthalene sublimation method. An attention is placed on an asymmetric increase of local mass transfer behind the orifice, which is combined with the influence of swirling flow and the orifice bias. The present results indicate that the mass transfer is generally increased with an increase in swirl intensity. However, it becomes asymmetric by the combined effect of the orifice bias for the bias larger than 0.4% of the pipe diameter and the swirl intensity larger than approximately 0.2. The enhanced mass transfer is found on the shorter orifice side behind a biased orifice, and the maximum mass transfer is increased 40% in comparison with the case without swirl and orifice bias.

  10. A study of heat and mass transfer in a fractional MHD flow over an infinite oscillating plate.

    Science.gov (United States)

    Shahid, N

    2015-01-01

    Exact expressions of velocity, temperature and mass concentration have been calculated for free convective flow of fractional MHD viscous fluid over an oscillating plate. Expressions of velocity have been obtained both for sine and cosine oscillations of plate. Corresponding fractional differential equations have been solved by using Laplace transform and inverse Laplace transform. The expression of temperature and mass concentration have been presented in the form of Fox-H function and in the form of general Wright function, respectively and velocity is presented in the form of integral solutions using Generalized function. Some limiting cases of fluid and fractional parameters have been discussed to retrieve some solutions present in literature. The influence of thermal radiation, mass diffusion and fractional parameters on fluid flow has been analyzed through graphical illustrations.

  11. Complexity Metrics for Workflow Nets

    DEFF Research Database (Denmark)

    Lassen, Kristian Bisgaard; van der Aalst, Wil M.P.

    2009-01-01

    Process modeling languages such as EPCs, BPMN, flow charts, UML activity diagrams, Petri nets, etc.\\ are used to model business processes and to configure process-aware information systems. It is known that users have problems understanding these diagrams. In fact, even process engineers and system...

  12. Effect of flow pulsation on mass transport in a cathode channel of polymer electrolyte membrane fuel cell

    Science.gov (United States)

    Han, Hun Sik; Kim, Yun Ho; Kim, Seo Young; Hyun, Jae Min

    2012-09-01

    An experimental and theoretical study on the cathode flow pulsation in a polymer electrolyte membrane (PEM) fuel cell is performed. A 10-cell PEM fuel cell stack with open-air cathode channels is employed to investigate the effects of the cathode flow pulsation on the overall performance. The polarization and corresponding power curves obtained show that both the limiting current density and the maximum power density are substantially enhanced when the pulsating component is added to the cathode mainstream flow. The flow pulsation at Re = 77 provides the maximum increment of 40% and 35.5% in the limiting current density and in the maximum power density, respectively. The enhancement of the overall performance is more pronounced at low Reynolds numbers. Also, the theoretical mass transport analysis in the pulsating cathode flow channel is carried out to verify the present experimental results. The momentum and species conservation equations are analytically solved, and the effective time-averaged dispersion coefficient is defined to account for the enhanced mass transport by the flow pulsation. Comprehensive analytical solutions show that the effect of the relevant parameters is in well accordance with the experimental results.

  13. Newtonian heating effect on unsteady hydromagnetic Casson fluid flow past a flat plate with heat and mass transfer

    Directory of Open Access Journals (Sweden)

    M. Das

    2015-12-01

    Full Text Available The influence of Newtonian heating on heat and mass transfer in unsteady hydromagnetic flow of a Casson fluid past a vertical plate in the presence of thermal radiation and chemical reaction is studied. The Casson fluid model is used to distinguish the non-Newtonian fluid behavior. The fluid flow is induced due to periodic oscillations of the plate along its length and a uniform transverse magnetic field is applied in a direction which is normal to the direction of fluid flow. The partial differential equations governing the flow, heat, and mass transfer are transformed to non-dimensional form using suitable non-dimensional variables which are then solved analytically by using Laplace transform technique. The numerical values of the fluid velocity, fluid temperature, and species concentration are depicted graphically whereas the values of skin-friction, Nusselt number, and Sherwood number are presented in tabular form. It is noticed that the fluid velocity and temperature decrease with increasing values of Casson parameter while concentration decreases with increasing values of chemical reaction parameter and Schmidt number. Such a fluid flow model has several industrial and medical applications such as in glass manufacturing, paper production, purification of crude oil and study of blood flow in the cardiovascular system.

  14. Physical durability of two types of long-lasting insecticidal nets (LLINs) three years after a mass LLIN distribution campaign in Mozambique, 2008-2011.

    Science.gov (United States)

    Morgan, Juliette; Abílio, Ana Paula; do Rosario Pondja, Maria; Marrenjo, Dulcisária; Luciano, Jacinta; Fernandes, Guilhermina; Sabindy, Samira; Wolkon, Adam; Ponce de Leon, Gabriel; Chan, Adeline; Vanden Eng, Jodi

    2015-02-01

    We conducted a prospective evaluation to measure the physical durability of two brands of long-lasting insecticidal nets (LLINs) distributed during a campaign in 2008 in Nampula Province, Mozambique. Households with LLINs tagged during the campaign (6,000) were geo-located (34%) and a random sample was selected for each of 3 years of follow-up. The LLINs were evaluated in the field and a laboratory for presence of holes and a proportional hole index (pHI) was calculated following the World Health Organization guidelines. We performed 567 interviews (79.0%) and found 75.3% (72.1-78.4%) of households retained at least one LLIN after 3 years; the most common cause of attrition was damage beyond repair (51.0%). Hole damage was evident after 1 year, and increased by year. Olyset had a significantly greater mean number of holes and pHI compared with PermaNet 2.0 brand (all P values ≤ 0.001). Additional information about LLIN durability is recommended to improve malaria control efforts. © The American Society of Tropical Medicine and Hygiene.

  15. Effects of cold-girdling on flows in the transport phloem in Ricinus communis: is mass flow ihibited?

    NARCIS (Netherlands)

    Peuke, A.D.; Windt, C.W.; As, van H.

    2006-01-01

    The effects of cold girdling of the transport phloem at the hypocotyl of Ricinus communis on solute and water transport were investigated. Effects on the chemical composition of saps of phloem and xylem as well as of stem tissue were studied by conventional techniques and the water flow in the

  16. Development of a slug flow absorber working with ammonia-water mixture: part II - data reduction model for local heat and mass transfer characterization

    Energy Technology Data Exchange (ETDEWEB)

    Kim, H.Y. [Kyushu University, Fukuoka (Japan). Interdisciplinary Graduate School of Engineering Sciences, Department of Energy and Environmental Engineering; Saha, B.B.; Koyama, S. [Kyushu University, Fukuoka (Japan). Institute of Advanced Material Study

    2003-09-01

    This study deals with the a data reduction model for clarifying experimental results of a counter-current slug flow absorber, working with ammonia-water mixture, for significantly low solution flow rate conditions. The data reduction model to obtain the local heat and mass transfer coefficient on the liquid side is proposed by using the drift flux model to analyze the flow characteristics. The control volume method and heat and mass transfer analogy are employed to solve the combined heat and mass transfer problem. As a result, it is found that the local heat and mass transfer coefficient on the liquid side of the absorber is greatly influenced by the flow pattern. The heat and mass transfer coefficient at the frost flow region is higher than that at the slug flow region due to flow disturbance and random fluctuation. The solution flow rate and gas flow rate have influence on the local heat and mass transfer coefficient at the frost flow region. However, it is insignificant at the slug flow region. (author)

  17. Radiation and mass transfer effects on MHD flow through porous medium past an exponentially accelerated inclined plate with variable temperature

    Directory of Open Access Journals (Sweden)

    Jyotsna Rani Pattnaik

    2017-03-01

    Full Text Available An analysis of unsteady MHD free convection flow, heat and mass transfer past an exponentially accelerated inclined plate embedded in a saturated porous medium with uniform permeability, variable temperature and concentration has been carried out. The novelty of the present study was to analyze the effect of angle of inclination on the flow phenomena in the presence of heat source/sink and destructive reaction. The Laplace transformation method has been used to solve the governing equations. The effects of the material parameters, magnetic field and the permeability of the porous medium are discussed. From the present analysis it is reported that the presence of magnetic field and porous medium prevents the flow reversal. Angle of inclination and heat source sustains a retarding effect on velocity. The present study has an immediate application in understanding the drag experienced at the heated/cooled and inclined surfaces in a seepage flow.

  18. Entrainment of bed material by Earth-surface mass flows: review and reformulation of depth-integrated theory

    Science.gov (United States)

    Iverson, Richard M.; Chaojun Ouyang,

    2015-01-01

    Earth-surface mass flows such as debris flows, rock avalanches, and dam-break floods can grow greatly in size and destructive potential by entraining bed material they encounter. Increasing use of depth-integrated mass- and momentum-conservation equations to model these erosive flows motivates a review of the underlying theory. Our review indicates that many existing models apply depth-integrated conservation principles incorrectly, leading to spurious inferences about the role of mass and momentum exchanges at flow-bed boundaries. Model discrepancies can be rectified by analyzing conservation of mass and momentum in a two-layer system consisting of a moving upper layer and static lower layer. Our analysis shows that erosion or deposition rates at the interface between layers must in general satisfy three jump conditions. These conditions impose constraints on valid erosion formulas, and they help determine the correct forms of depth-integrated conservation equations. Two of the three jump conditions are closely analogous to Rankine-Hugoniot conditions that describe the behavior of shocks in compressible gasses, and the third jump condition describes shear traction discontinuities that necessarily exist across eroding boundaries. Grain-fluid mixtures commonly behave as compressible materials as they undergo entrainment, because changes in bulk density occur as the mixtures mobilize and merge with an overriding flow. If no bulk density change occurs, then only the shear-traction jump condition applies. Even for this special case, however, accurate formulation of depth-integrated momentum equations requires a clear distinction between boundary shear tractions that exist in the presence or absence of bed erosion.

  19. Acquisition and correlation of cryogenic nitrogen mass flow data through a multiple orifice Joule-Thomson device

    Science.gov (United States)

    Papell, S. Stephen; Saiyed, Naseem H.; Nyland, Ted W.

    1990-05-01

    Liquid nitrogen mass flow rate, pressure drop, and temperature drop data were obtained for a series of multiple orifice Joule-Thomson devices, known as Visco Jets, over a wide range of flow resistance. The test rig used to acquire the data was designed to minimize heat transfer so that fluid expansion through the Visco Jets would be isenthalpic. The data include a range of fluid inlet pressures from 30 to 60 psia, fluid inlet temperatures from 118 to 164 R, outlet pressures from 2.8 to 55.8 psia, outlet temperatures from 117 to 162 R and flow rate from 0.04 to 4.0 lbm/hr of nitrogen. A flow rate equation supplied by the manufacturer was found to accurately predict single-phase (noncavitating) liquid nitrogen flow through the Visco Jets. For cavitating flow, the manufacturer's equation was found to be inaccurate. Greatly improved results were achieved with a modified version of the single-phase equation. The modification consists of a multiplication factor to the manufacturer's equation equal to one minus the downstream quality on an isenthalpic expansion of the fluid across the Visco Jet. For a range of flow resistances represented by Visco Jet Lohm ratings between 17,600 and 80,000, 100 percent of the single-phase data and 85 percent of the two-phase data fall within + or - 10 percent of predicted values.

  20. Assessment of Mass Transfer Coefficients in Coalescing Slug Flow in Vertical Pipes and Applications to Tubular Airlift Membrane Bioreactors

    DEFF Research Database (Denmark)

    Ratkovich, Nicolas Rios; Berube, P.R.; Nopens, I.

    2011-01-01

    higher shear stresses near the membrane surface, which generate high mass transfer coefficients from the surface to the bulk region. However, measuring the mass transfer coefficient is difficult in complex heterogeneous mixtures like activated sludge and existing techniques (e.g. electrochemical methods......) cannot be applied directly. As an alternative, in this work, a multidisciplinary approach was selected, by exploiting dimensionless analysis using the Sherwood number. Mass transfer coefficients were measured at various superficial velocities of gas and liquid flow in a tubular system. Due......). A semi-empirical relationship based on the Lévêque relationship for the Sherwood number (mass transfer coefficient) was formulated for the laminar regime. A test case comparison between water and activated sludge was performed based on full-scale airlift MBR operational conditions. It was found...

  1. A field comparison of BTEX mass flow rates based on integral pumping tests and point scale measurements.

    Science.gov (United States)

    Dietze, Michael; Dietrich, Peter

    2011-03-25

    Measuring contaminant flow rates at control cross sections is the most accurate method to evaluate natural attenuation processes in the saturated subsurface. In most instances, point scale measurement is the method of choice due to practical reasons and cost factors. However, at many field sites, the monitoring network is too sparse for a reliable estimation of contaminant and groundwater flow rates. Therefore, integral pumping tests have been developed as an alternative. In this study, we compare mass flow rates obtained by integral pumping test results and point scale data. We compare results of both methods with regard to uncertainties due to estimation errors and mass flow estimations based on two different point scale networks. The differences between benzene and groundwater flow rate estimates resulting from point scale samples and integral pumping tests were 6.44% and 6.97%, respectively, demonstrating the applicability of both methods at the site. Point scale-based data, especially with use of cost efficient Direct-Push technique, can be applied to show the contaminant distribution at a site and may be followed by a denser point scale network or an integral method. Nevertheless, a combination of both methods decreases uncertainties. Copyright © 2010 Elsevier B.V. All rights reserved.

  2. Energy of vanishing flow in heavy-ion collisions: Role of mass ...

    Indian Academy of Sciences (India)

    ... same total mass. For the present study, the total mass of the system is kept constant (A_{\\text{TOT}} = 152) and mass asymmetry of the reaction is varied between 0.2 and 0.7. The Coulomb interactions as well as different equations of state are found to affect the balance energy significantly for larger asymmetric reactions.

  3. Analysis of Mass Transfer Resistance for Adsorption of Phosphate onto Industrial Waste Materials in Plug-flow column

    Directory of Open Access Journals (Sweden)

    Khamidun Mohd Hairul

    2017-01-01

    Full Text Available The understanding resistance of mass transfer for adsorption of phosphate (PO43- onto industrial waste such as clay brick and ceramic as an adsorbent is important to verify. This study presented the removal of (PO43- from a synthetic solution by adsorbing onto the clay brick and ceramic wastes in a plug flow column (PFC. The experimental results showed that increasing the flow rate was decreases the breakthrough time. The mass transfer factor (MTF models were used to study the behaviours of breakthrough curve and to determine the resistance of mass transfer. The MTF models verified that the resistance of mass transfer could be dependent on porous diffusion until the percentage of outflow reaches 72% for clay brick waste and 86% for ceramic waste, even though film mass transfer can play a minor role in controlling the movement of (PO43- from the bulk water to film zone. The results of MTF models coefficient could be indicated to increase the capacity of clay brick and ceramic wastes to adsorb (PO43- from synthetic solution, it needs to develop the porosity of these adsorbents by either physical or chemical modification.

  4. Ambient infrared laser ablation mass spectrometry (AIRLAB-MS) with plume capture by continuous flow solvent probe

    Energy Technology Data Exchange (ETDEWEB)

    O' Brien, Jeremy T.; Williams, Evan R.; Holman, Hoi-Ying N.

    2017-10-31

    A new experimental setup for spatially resolved ambient infrared laser ablation mass spectrometry (AIRLAB-MS) that uses an infrared microscope with an infinity-corrected reflective objective and a continuous flow solvent probe coupled to a Fourier transform ion cyclotron resonance mass spectrometer is described. The efficiency of material transfer from the sample to the electrospray ionization emitter was determined using glycerol/methanol droplets containing 1 mM nicotine and is .about.50%. This transfer efficiency is significantly higher than values reported for similar techniques.

  5. Quantification of proteins by flow cytometry: Quantification of human hepatic transporter P-gp and OATP1B1 using flow cytometry and mass spectrometry.

    Science.gov (United States)

    Hogg, Karen; Thomas, Jerry; Ashford, David; Cartwright, Jared; Coldwell, Ruth; Weston, Daniel J; Pillmoor, John; Surry, Dominic; O'Toole, Peter

    2015-07-01

    Flow cytometry is a powerful tool for the quantitation of fluorescence and is proven to be able to correlate the fluorescence intensity to the number of protein on cells surface. Mass spectroscopy can also be used to determine the number of proteins per cell. Here we have developed two methods, using flow cytometry and mass spectroscopy to quantify number of transporters in human cells. These two approaches were then used to analyse the same samples so that a direct comparison could be made. Transporters have a major impact on the behaviour of a diverse number of drugs in human systems. While active uptake studies by transmembrane protein transporters using model substrates are routinely undertaken in human cell lines and hepatocytes as part of drug discovery and development, the interpretation of these results is currently limited by the inability to quantify the number of transporters present in the test samples. Here we provide a flow cytometric method for accurate quantification of transporter levels both on the cell surface and within the cell, and compare this to a quantitative mass spectrometric approach. Two transporters were selected for the study: OATP1B1 (also known as SLCO1B1, LST-1, OATP-C, OATP2) due to its important role in hepatic drug uptake and elimination; P-gp (also known as P-glycoprotein, MDR1, ABCB1) as a well characterised system and due to its potential impact on oral bioavailability, biliary and renal clearance, and brain penetration of drugs that are substrates for this transporter. In all cases the mass spectrometric method gave higher levels than the flow cytometry method. However, the two methods showed very similar trends in the relative ratios of both transporters in the hepatocyte samples investigated. The P-gp antibody allowed quantitative discrimination between externally facing transporters located in the cytoplasmic membrane and the total number of transporters on and in the cell. The proportion of externally facing transporter

  6. Computer program to calculate three-dimensional boundary layer flows over wings with wall mass transfer

    Science.gov (United States)

    Mclean, J. D.; Randall, J. L.

    1979-01-01

    A system of computer programs for calculating three dimensional transonic flow over wings, including details of the three dimensional viscous boundary layer flow, was developed. The flow is calculated in two overlapping regions: an outer potential flow region, and a boundary layer region in which the first order, three dimensional boundary layer equations are numerically solved. A consistent matching of the two solutions is achieved iteratively, thus taking into account viscous-inviscid interaction. For the inviscid outer flow calculations, the Jameson-Caughey transonic wing program FLO 27 is used, and the boundary layer calculations are performed by a finite difference boundary layer prediction program. Interface programs provide communication between the two basic flow analysis programs. Computed results are presented for the NASA F8 research wing, both with and without distributed surface suction.

  7. Fractionation and Characterization of High Aspect Ratio Gold Nanorods Using Asymmetric-Flow Field Flow Fractionation and Single Particle Inductively Coupled Plasma Mass Spectrometry

    Directory of Open Access Journals (Sweden)

    Thao M. Nguyen

    2015-07-01

    Full Text Available Gold nanorods (GNRs are of particular interest for biomedical applications due to their unique size-dependent longitudinal surface plasmon resonance band in the visible to near-infrared. Purified GNRs are essential for the advancement of technologies based on these materials. Used in concert, asymmetric-flow field flow fractionation (A4F and single particle inductively coupled mass spectrometry (spICP-MS provide unique advantages for fractionating and analyzing the typically complex mixtures produced by common synthetic procedures. A4F fractions collected at specific elution times were analyzed off-line by spICP-MS. The individual particle masses were obtained by conversion of the ICP-MS pulse intensity for each detected particle event, using a defined calibration procedure. Size distributions were then derived by transforming particle mass to length assuming a fixed diameter. The resulting particle lengths correlated closely with ex situ transmission electron microscopy. In contrast to our previously reported observations on the fractionation of low-aspect ratio (AR GNRs (AR < 4, under optimal A4F separation conditions the results for high-AR GNRs of fixed diameter (≈20 nm suggest normal, rather than steric, mode elution (i.e., shorter rods with lower AR generally elute first. The relatively narrow populations in late eluting fractions suggest the method can be used to collect and analyze specific length fractions; it is feasible that A4F could be appropriately modified for industrial scale purification of GNRs.

  8. D0 Silicon Upgrade: Calculating Mass Flow Rates at Sub-Sonic Conditions Trhough Venturis (FT-4052-H & FT-4053-H) and an Orifice Plate (F)-2019-H)

    Energy Technology Data Exchange (ETDEWEB)

    Zaczek, Mauiusz; /Fermilab

    1996-08-15

    The purpose of this engineering note is to explain the method involved in calculating the mass flow rates through venturis and orifice plates at sub-sonic conditions. In particular, the mass flow rate calculations are required for two FLOW-DYNE venturi flow meters, serial no. 35821 and no. 35822, and an orifice plate flow meter, serial no. 35823. The two venturis, FT-4052-H and FT-4053-H, are located in the D-Zero VLPC valve box at the refrigerator and the orifice plate, FO-2019-H, is on the high pressure helium supply line in the assembly building.

  9. Standardization of flow cytometry in myelodysplastic syndromes: a report from an international consortium and the European LeukemiaNet Working Group.

    NARCIS (Netherlands)

    Westers, T.M.; Ireland, R.; Kern, W.; Alhan, C.; Balleisen, J.S.; Bettelheim, P.; Burbury, K.; Cullen, M.; Cutler, J.A.; Porta, M.G. Della; Drager, A.M.; Feuillard, J.; Font, P.; Germing, U.; Haase, D.; Johansson, U.; Kordasti, S.; Loken, M.R.; Malcovati, L.; Marvelde, J.G. Te; Matarraz, S.; Milne, T.; Moshaver, B.; Mufti, G.J.; Ogata, K.; Orfao, A.; Porwit, A.; Psarra, K.; Richards, S.J.; Subira, D.; Tindell, V.; Vallespi, T.; Valent, P.; Velden, V.H. van der; Witte, T.J.M. de; Wells, D.A.; Zettl, F.; Bene, M.C.; Loosdrecht, A.A. van de

    2012-01-01

    Flow cytometry (FC) is increasingly recognized as an important tool in the diagnosis and prognosis of myelodysplastic syndromes (MDS). However, validation of current assays and agreement upon the techniques are prerequisites for its widespread acceptance and application in clinical practice.

  10. Radiation and mass transfer effects on unsteady MHD convective flow past an infinite vertical plate with Dufour and Soret effects

    OpenAIRE

    N. Vedavathi; K Ramakrishna; K. Jayarami Reddy

    2015-01-01

    This paper deals with the effects of heat and mass transfer on two-dimensional unsteady MHD free convection flow past a vertical porous plate in a porous medium in the presence of thermal radiation under the influence of Dufour and Soret effects. The governing nonlinear partial differential equations have been reduced to the coupled nonlinear ordinary differential equations by the similarity transformations. The resulting equations are then solved numerically using shooting method along with ...

  11. Grain-size segregation and levee formation in geophysical mass flows

    Science.gov (United States)

    Johnson, C.G.; Kokelaar, B.P.; Iverson, Richard M.; Logan, M.; LaHusen, R.G.; Gray, J.M.N.T.

    2012-01-01

    Data from large-scale debris-flow experiments are combined with modeling of particle-size segregation to explain the formation of lateral levees enriched in coarse grains. The experimental flows consisted of 10 m3 of water-saturated sand and gravel, which traveled ∼80 m down a steeply inclined flume before forming an elongated leveed deposit 10 m long on a nearly horizontal runout surface. We measured the surface velocity field and observed the sequence of deposition by seeding tracers onto the flow surface and tracking them in video footage. Levees formed by progressive downslope accretion approximately 3.5 m behind the flow front, which advanced steadily at ∼2 m s−1during most of the runout. Segregation was measured by placing ∼600 coarse tracer pebbles on the bed, which, when entrained into the flow, segregated upwards at ∼6–7.5 cm s−1. When excavated from the deposit these were distributed in a horseshoe-shaped pattern that became increasingly elevated closer to the deposit termination. Although there was clear evidence for inverse grading during the flow, transect sampling revealed that the resulting leveed deposit was strongly graded laterally, with only weak vertical grading. We construct an empirical, three-dimensional velocity field resembling the experimental observations, and use this with a particle-size segregation model to predict the segregation and transport of material through the flow. We infer that coarse material segregates to the flow surface and is transported to the flow front by shear. Within the flow head, coarse material is overridden, then recirculates in spiral trajectories due to size-segregation, before being advected to the flow edges and deposited to form coarse-particle-enriched levees.

  12. Chemical reaction in MHD flow past a vertical plate with mass ...

    African Journals Online (AJOL)

    Chemical reaction plays an important role in MHD flow. It has industrial applications, such as design of chemical processing equipments, food processing and cooling towers etc. In the present paper, chemical reaction effect on a viscous, incompressible and electrically conducting fluid with unsteady MHD flow past an ...

  13. Lactic Acid Extraction and Mass Transfer Characteristics in Slug Flow Capillary Microreactors

    NARCIS (Netherlands)

    Susanti, S.; Winkelman, J.G.N.; Schuur, Boelo; heeres, h.j.; Yue, J.

    2016-01-01

    Capillary microreactors operated under the slug flow regime were investigated for the separation of lactic acid from the aqueous phase using liquid–liquid reactive extraction. The experiments were performed at a 1:1 flow ratio of the aqueous to organic phases in a setup consisting of an inlet Y-type

  14. Heat or mass transfer at low Péclet number for Brinkman and Darcy flow round a sphere

    KAUST Repository

    Bell, Christopher G.

    2014-01-01

    Prior research into the effect of convection on steady-state mass transfer from a spherical particle embedded in a porous medium has used the Darcy model to describe the flow. However, a limitation of the Darcy model is that it does not account for viscous effects near boundaries. Brinkman modified the Darcy model to include these effects by introducing an extra viscous term. Here we investigate the impact of this extra viscous term on the steady-state mass transfer from a sphere at low Péclet number, Pe 1. We use singular perturbation techniques to find the approximate asymptotic solution for the concentration profile. Mass-release from the surface of the sphere is described by a Robin boundary condition, which represents a first-order chemical reaction. We find that a larger Brinkman viscous boundary layer renders mass transport by convection less effective, and reduces the asymmetry in the peri-sphere concentration profiles. We provide simple analytical expressions that can be used to calculate the concentration profiles, as well as the local and average Sherwood numbers; and comparison to numerical simulations verifies the order of magnitude of the error in the asymptotic expansions. In the appropriate limits, the asymptotic results agree with solutions previously obtained for Stokes and Darcy flow. The solution for Darcy flow with a Robin boundary condition has not been considered previously in the literature and is a new result. Whilst the article has been formulated in terms of mass transfer, the analysis is also applicable to heat transfer, with concentration replaced by temperature and the Sherwood number by the Nusselt number. © 2013 Elsevier Ltd. All rights reserved.

  15. The Pressure Drop Model of Liquid Flow with Wall Mass Transfer in Horizontal Wellbore with Perforated Completion

    Directory of Open Access Journals (Sweden)

    Ping Yue

    2014-01-01

    Full Text Available The fluids in horizontal wells can exhibit complicated flow behaviors with wall mass transfer, partly due to the interaction between the main flow and the radial influx along the wellbore and the completion parameters used. This paper presents a novel regression model established based on the experiment data retrieved from the available literatures to determine the apparent friction factor for a single phase wellbore flow. The proposed model has the potential to be readily applicable to different perforation parameters, such as shot phasing and shot density. Compared with other models in the same practical example which is offered by Ouyang et al., the model of this paper to calculate the wellbore pressure is applicable and reasonable. This new model can be easily incorporated into reservoir simulators or analytical reservoir and horizontal wellbore inflow coupling models.

  16. Effects of Hall current, radiation and rotation on natural convection heat and mass transfer flow past a moving vertical plate

    Directory of Open Access Journals (Sweden)

    G.S. Seth

    2014-06-01

    Full Text Available An investigation of the effects of Hall current and rotation on unsteady hydromagnetic natural convection flow with heat and mass transfer of an electrically conducting, viscous, incompressible and optically thick radiating fluid past an impulsively moving vertical plate embedded in a fluid saturated porous medium, when temperature of the plate has a temporarily ramped profile, is carried out. Exact solution of the governing equations is obtained in closed form by Laplace transform technique. Exact solution is also obtained in case of unit Schmidt number. Expressions for skin friction due to primary and secondary flows and Nusselt number are derived for both ramped temperature and isothermal plates. Expression for Sherwood number is also derived. The numerical values of primary and secondary fluid velocities, fluid temperature and species concentration are displayed graphically whereas those of skin friction are presented in tabular form for various values of pertinent flow parameters.

  17. Stagnation-point flow and mass transfer with chemical reaction past a permeable stretching/shrinking sheet

    Science.gov (United States)

    Najib, Najwa; Bachok, Norfifah; Aziz, Siti Fatima Abdul; Arifin, Norihan Md

    2014-07-01

    An analysis is carried out to investigate the steady two-dimensional boundary layer stagnation point flow past a permeable stretching/shrinking sheet with chemical reaction. Using a similarity transformation, the governing equations are transformed into coupled, nonlinear ordinary differential equations which are then solved numerically using a shooting method. Effects of uniform suction and injection on the flow and mass transfer characteristics are thoroughly examined. Different from a stretching sheet, it is found that the solutions for a shrinking sheet are non-unique. The range of parameter b/a where the similarity solution exists for the steady stagnation point flow over a stretching/shrinking sheet with suction effect is larger compared with injection effect. The results indicate that the concentration boundary layer thickness decreases with increasing values of Schmidt number and reaction-rate parameter for both solutions.

  18. Flow modulation comprehensive two-dimensional gas chromatography-mass spectrometry using ≈4 mL min(-1) gas flows.

    Science.gov (United States)

    Franchina, Flavio A; Maimone, Mariarosa; Tranchida, Peter Q; Mondello, Luigi

    2016-04-08

    The main objective of the herein described research was focused on performing satisfactory flow modulation (FM), in comprehensive two-dimensional gas chromatography-mass spectrometry (GC×GC-MS), using an MS-compatible second-dimension gas flow of approx. 4 mL min(-1). The FM model used was based on that initially proposed by Seeley et al. [3]. The use of limited gas flows was enabled through fine tuning of the FM parameters, in particular the duration of the re-injection (or flushing) process. Specifically, the application of a long re-injection period (i.e., 700 ms) enabled efficient accumulation-loop flushing with gas flows of about 4 mL min(-1). It was possible to apply such extended re-injection periods by using different restrictor lengths in the connections linking the modulator to the auxiliary pressure source. FM GC×GC-MS applications were performed on a mixture containing C9-10 alkanes, and on a sample of essential oil. GC×GC-MS sensitivity was compared with that attained by using conventional GC-MS analysis, in essential oil applications. It was observed that signal intensities were, in general, considerably higher in the FM GC×GC-MS experiments. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Combining asymmetrical flow field-flow fractionation with light-scattering and inductively coupled plasma mass spectrometric detection for characterization of nanoclay used in biopolymer nanocomposites

    DEFF Research Database (Denmark)

    Schmidt, Bjørn; Petersen, Jens Højslev; Koch, C. Bender

    2009-01-01

    It is expected that biopolymers obtained from renewable resources will in due course become fully competitive with fossil fuel-derived plastics as food-packaging materials. In this context, biopolymer nanocomposites are a field of emerging interest since such materials can exhibit improved...... mechanical and barrier properties and be more suitable for a wider range of food-packaging applications. Natural or synthetic clay nanofillers are being investigated for this purpose in a project called NanoPack funded by the Danish Strategic Research Council. In order to detect and characterize the size...... of clay nanoparticulates, an analytical system combining asymmetrical flow field-flow fractionation (AF4) with multi-angle light-scattering detection (MALS) and inductively coupled plasma mass spectrometry (ICP-MS) is presented. In a migration study, we tested a biopolymer nanocomposite consisting...

  20. Effects of Swirl Bubble Injection on Mass Transfer and Hydrodynamics for Bubbly Flow Reactors: A Concept Paper

    Directory of Open Access Journals (Sweden)

    Farooqi Ahmad Salam

    2017-01-01

    Full Text Available Bubble flow reactors (BFR are commonly used for various industrial processes in the field of oil and gas production, pharmaceutical industries, biochemical and environmental engineering etc. The operation and performance of these reactors rely heavily on a range of hydrodynamic parameters; prominent among them are geometric configurations including gas injection geometry, operating conditions, mass transfer etc. A huge body of literature is available to describe the optimum design and performance of bubbly flow reactors with conventional bubble injection. Attempts were made to modify gas injection for improved efficiency of BFR’s. However, here instead of modifying the geometry of the gas injection, an attempt has been made to generate swirl bubbles for gaining larger mass transfer between gas and liquid. Here an exceptionally well thought strategies have been used in our numerical simulations towards the design of swirl injection mechanism, whose paramount aspect is to inhibit the rotary liquid motion but facilitates the swirl movement for bubbles in nearly stationary liquid. Our comprehension here is that the swirl motion can strongly affect the performance of bubbly reactor by identifying the changes in hydrodynamic parameters as compared to the conventional bubbly flows. In order to achieve this bubbly flow, an experimental setup has been designed as well as computational fluid dynamic (CFD code was used with to highlight a provision of swirl bubble injection by rotating the sparger plate.

  1. Rotation and Radiation Effects on MHD Flow through Porous Medium Past a Vertical Plate with Heat and Mass Transfer

    Directory of Open Access Journals (Sweden)

    Uday Singh Rajput

    2017-11-01

    Full Text Available Effects of rotation and radiation on unsteady MHD flow past a vertical plate with variable wall temperature and mass diffusion in the presence of Hall current is studied here. Earlier we studied chemical reaction effect on unsteady MHD flow past an exponentially accelerated inclined plate with variable temperature and mass diffusion in the presence of Hall current. We had obtained the results which were in agreement with the desired flow phenomenon. To study further, we are changing the model by considering radiation effect on fluid, and changing the geometry of the model. Here in this paper we are taking the plate positioned vertically upward and rotating with velocity Ω . Further, medium of the flow is taken as porous. The plate temperature and the concentration level near the plate increase linearly with time. The governing system of partial differential equations is transformed to dimensionless equations using dimensionless variables. The dimensionless equations under consideration have been solved by Laplace transform technique. The model contains equations of motion, diffusion equation and equation of energy. To analyze the solution of the model, desirable sets of the values of the parameters have been considered. The governing equations involved in the flow model are solved by the Laplace-transform technique. The results obtained have been analyzed with the help of graphs drawn for different parameters. The numerical values obtained for the drag at boundary and Nusselt number have been tabulated. We found that the values obtained for velocity, concentration and temperature are in concurrence with the actual flow of the fluid

  2. Dual-labelled antibodies for flow and mass cytometry: A new tool for cross-platform comparison and enrichment of target cells for mass cytometry.

    Science.gov (United States)

    Baumgart, Sabine; Schulz, Axel R; Peddinghaus, Anette; Stanislawiak, Silke; Gillert, Sarah; Hirseland, Heike; Krauthäuser, Susanne; Dose, Christian; Mei, Henrik E; Grützkau, Andreas

    2017-08-01

    Antibody conjugates applicable in both conventional flow and mass cytometry would offer interesting options for cross-platform comparison, as well as the enrichment of rare target cells by conventional flow cytometry (FC) sorting prior to deep phenotyping by mass cytometry (MC). Here, we introduce a simple method to generate dual fluorochrome/metal-labelled antibodies by consecutive orthogonal labelling. First, we compared different fluorochrome-conjugated antibodies specific for CD4, such as FITC, Vio667, VioGreen or VioBlue for their compatibility with the conventional secondary MAXPAR® labelling protocol. After labelling with 141 Pr, the fluorescence emission spectra of all fluorochromes investigated retained their characteristics, and CD4 dual conjugates (DCs) provided consistent results in immune phenotyping assays performed by FC and MC. The phenotypical composition of CD4+ T-cells was maintained after enrichment by FC sorting using different CD4 DCs. Finally, magnetic cell depletion was combined with FC sorting using CD19-VioBlue-142 Nd, CD20-VioGreen-147 Sm, CD27-Cy5-167 Er and CD38-Alexa488-143 Nd DC to enrich rare human plasmablasts to purities >80%, which allowed a subsequent deep phenotyping by MC. In conclusion, DCs have been successfully established for direct assay comparison between FC and MC, and help to minimise MC data acquisition time for deep phenotyping of rare cell subsets. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Bacterial deposition in a parallel plate and a stagnation point flow chamber: microbial adhesion mechanisms depend on the mass transport conditions.

    Science.gov (United States)

    Bakker, Dewi P; Busscher, Henk J; van der Mei, Henny C

    2002-02-01

    Deposition onto glass in a parallel plate (PP) and in a stagnation point (SP) flow chamber of Marinobacter hydrocarbonoclasticus, Psychrobacter sp. and Halomonas pacifica, suspended in artificial seawater, was compared in order to determine the influence of methodology on bacterial adhesion mechanisms. The three strains had different cell surface hydrophobicities, with water contact angles on bacterial lawns ranging from 18 to 85 degrees. Bacterial zeta potentials in artificial seawater were essentially zero. The three strains showed different adhesion kinetics and the hydrophilic bacterium H. pacifica had the greatest affinity for hydrophilic glass. On average, initial deposition rates were two- to threefold higher in the SP than in the PP flow chamber, possibly due to the convective fluid flow toward the substratum surface in the SP flow chamber causing more intimate contact between a substratum and a bacterial cell surface than the gentle collisions in the PP flow chamber. The ratios between the experimental deposition rates and theoretically calculated deposition rates based on mass transport equations not only differed among the strains, but were also different for the two flow chambers, indicating different mechanisms under the two modes of mass transport. The efficiencies of deposition were higher in the SP flow chamber than in the PP flow chamber: 62+/-4 and 114+/-28% respectively. Experiments in the SP flow chamber were more reproducible than those in the PP flow chamber, with standard deviations over triplicate runs of 8% in the SP and 23% in the PP flow chamber. This is probably due to better-controlled convective mass transport in the SP flow chamber, as compared with the diffusion-controlled mass transport in the PP flow chamber. In conclusion, this study shows that bacterial adhesion mechanisms depend on the prevailing mass transport conditions in the experimental set-up used, which makes it essential in the design of experiments that a methodology is

  4. Unravelling the multiphase run-out conditions of a slide- flow mass movement

    NARCIS (Netherlands)

    van Asch, Theo; Xu, Qiang; Dong, X.J.

    2014-01-01

    In this paper an attempt is made to unravel the run-out characteristics of a mass movement in the Sichuan Province, SW China by means of 1D numerical modelling and calibration on the topography of run-out profiles.The Dagou mass movement started as a rockslide with an initial volume of 480,000m3,

  5. Mass transfer, fluid flow and membrane properties in flat and corrugated plate hyperfiltration modules

    NARCIS (Netherlands)

    Racz, I.G.; Groot Wassink, J.; Klaassen, R.

    1986-01-01

    Concentration polarisation, decreasing the efficiency in membrane separation processes, can be reduced by increasing mass transfer between membrane surface and bulk of the feed stream. Analogous to techniques used in plate heat exchangers efforts have been made to enhance mass transfer in a plate

  6. NA-NET numerical analysis net

    Energy Technology Data Exchange (ETDEWEB)

    Dongarra, J. [Tennessee Univ., Knoxville, TN (United States). Dept. of Computer Science]|[Oak Ridge National Lab., TN (United States); Rosener, B. [Tennessee Univ., Knoxville, TN (United States). Dept. of Computer Science

    1991-12-01

    This report describes a facility called NA-NET created to allow numerical analysts (na) an easy method of communicating with one another. The main advantage of the NA-NET is uniformity of addressing. All mail is addressed to the Internet host ``na-net.ornl.gov`` at Oak Ridge National Laboratory. Hence, members of the NA-NET do not need to remember complicated addresses or even where a member is currently located. As long as moving members change their e-mail address in the NA-NET everything works smoothly. The NA-NET system is currently located at Oak Ridge National Laboratory. It is running on the same machine that serves netlib. Netlib is a separate facility that distributes mathematical software via electronic mail. For more information on netlib consult, or send the one-line message ``send index`` to netlib{at}ornl.gov. The following report describes the current NA-NET system from both a user`s perspective and from an implementation perspective. Currently, there are over 2100 members in the NA-NET. An average of 110 mail messages pass through this facility daily.

  7. NA-NET numerical analysis net

    Energy Technology Data Exchange (ETDEWEB)

    Dongarra, J. (Tennessee Univ., Knoxville, TN (United States). Dept. of Computer Science Oak Ridge National Lab., TN (United States)); Rosener, B. (Tennessee Univ., Knoxville, TN (United States). Dept. of Computer Science)

    1991-12-01

    This report describes a facility called NA-NET created to allow numerical analysts (na) an easy method of communicating with one another. The main advantage of the NA-NET is uniformity of addressing. All mail is addressed to the Internet host na-net.ornl.gov'' at Oak Ridge National Laboratory. Hence, members of the NA-NET do not need to remember complicated addresses or even where a member is currently located. As long as moving members change their e-mail address in the NA-NET everything works smoothly. The NA-NET system is currently located at Oak Ridge National Laboratory. It is running on the same machine that serves netlib. Netlib is a separate facility that distributes mathematical software via electronic mail. For more information on netlib consult, or send the one-line message send index'' to netlib{at}ornl.gov. The following report describes the current NA-NET system from both a user's perspective and from an implementation perspective. Currently, there are over 2100 members in the NA-NET. An average of 110 mail messages pass through this facility daily.

  8. Experiments and simulation of a net closing mechanism for tether-net capture of space debris

    Science.gov (United States)

    Sharf, Inna; Thomsen, Benjamin; Botta, Eleonora M.; Misra, Arun K.

    2017-10-01

    This research addresses the design and testing of a debris containment system for use in a tether-net approach to space debris removal. The tether-net active debris removal involves the ejection of a net from a spacecraft by applying impulses to masses on the net, subsequent expansion of the net, the envelopment and capture of the debris target, and the de-orbiting of the debris via a tether to the chaser spacecraft. To ensure a debris removal mission's success, it is important that the debris be successfully captured and then, secured within the net. To this end, we present a concept for a net closing mechanism, which we believe will permit consistently successful debris capture via a simple and unobtrusive design. This net closing system functions by extending the main tether connecting the chaser spacecraft and the net vertex to the perimeter and around the perimeter of the net, allowing the tether to actuate closure of the net in a manner similar to a cinch cord. A particular embodiment of the design in a laboratory test-bed is described: the test-bed itself is comprised of a scaled-down tether-net, a supporting frame and a mock-up debris. Experiments conducted with the facility demonstrate the practicality of the net closing system. A model of the net closure concept has been integrated into the previously developed dynamics simulator of the chaser/tether-net/debris system. Simulations under tether tensioning conditions demonstrate the effectiveness of the closure concept for debris containment, in the gravity-free environment of space, for a realistic debris target. The on-ground experimental test-bed is also used to showcase its utility for validating the dynamics simulation of the net deployment, and a full-scale automated setup would make possible a range of validation studies of other aspects of a tether-net debris capture mission.

  9. Chemical reaction in MHD flow past a vertical plate with mass ...

    African Journals Online (AJOL)

    Corresponding Author: e-mail: rajputneetulko@gmail.com. Abstract. Chemical reaction plays an important role in MHD flow. It has industrial applications, such as design of chemical processing equipments, food processing and cooling towers etc.

  10. Cavitating flow control through continuous tangential mass injection on a 2D hydrofoil at a small attack angle

    Directory of Open Access Journals (Sweden)

    Timoshevskiy Mikhail V.

    2016-01-01

    Full Text Available We studied cavitating flow over the suction side of a symmetric 2D foil – a scaled-down model of high-pressure hydroturbine guide vanes (GV – in different cavitation regimes at the attack angle of 3°. High-speed imaging was used to analyze spatial patterns and time dynamics of the gas-vapour cavities. A hydroacoustic pressure transducer was employed to register time-spectra of pressure fluctuations nearby the hydrofoil. A PIV technique was applied to measure the velocity fields and its fluctuations. The active flow control was implemented by means of a continuous liquid supply with different flow rates through a slot channel located in the GV surface. It was found that the active mass injection does not influence the primary flow upstream of the slot channel position. For the cavitation-free and cavitation inception cases, the injection was shown to make the turbulent wake past the GV section more intense. However, at the developed cavitation regimes the active flow management made it possible to reduce substantially the amplitude or even totally suppress the periodic cavity length oscillations and pressure pulsations associated with them.

  11. An experimental and numerical study of the flow and mass transfer in a model of the wearable artificial kidney dialyzer

    Science.gov (United States)

    2010-01-01

    Background Published studies of the past decades have established that mass transfer across the dialyzer membrane is governed by diffusion, convection and osmosis. While the former is independent of the pressure in the liquids, the latter two are pressure dependent and are enhanced when the pressure difference across the membrane is increased. The goal of the present study is to examine the impact of pulsatile flow on the transport phenomena across the membrane of a high-flux dialyzer in a wearable artificial kidney (WAK) with a novel single small battery-operated pulsatile pump that drives both the blood and dialysate in a counter-phased manner, maximizing the trans-membrane pressure. Methods Both in-vitro experimental and numerical tools are employed to compare the performance of the pulsatile WAK dialyzer with a traditional design of a single-channel roller blood pump together with a centrifugal pump that drives the dialysate flow. The numerical methods utilize the axisymmetric Navier-Stokes and mass transfer equations to model the flow in the fibers of the dialyzer. Results While diffusion is still the dominating transport regime, the WAK pump enhances substantially the trans-membrane pressure and thus increases mass convection that might be as high as 30% of the overall transfer. This increase is obtained due to the design of the pulsatile WAK pump that increases ultrafiltration by increasing the trans-membrane pressure. Conclusions The experimental and numerical results revealed that when pumping at similar flow rates, a small battery-operated pulsatile pump provides clearances of urea and creatinine similar as or better than a large heavy AC-powered roller pump. PMID:20497572

  12. Blend Down Monitoring System Fissile Mass Flow Monitor Implementation at the ElectroChemical Plant, Zelenogorsk, Russia

    Energy Technology Data Exchange (ETDEWEB)

    Uckan, T.

    2005-11-11

    The implementation plans and preparations for installation of the Fissile Mass Flow Monitor (FMFM) equipment at the ElectroChemical Plant (ECP), Zelenogorsk, Russia, are presented in this report. The FMFM, developed at Oak Ridge National Laboratory, is part of the Blend Down Monitoring System (BDMS), developed for the U.S. Department of Energy Highly Enriched Uranium (HEU) Transparency Implementation Program. The BDMS provides confidence to the United States that the Russian nuclear facilities supplying the lower-assay ({approx}4%) product low enriched uranium (P-LEU) to the United States from down-blended weapons-grade HEU are meeting the nonproliferation goals of the government-to-government HEU Purchase Agreement, signed between the Russian Federation and the United States in 1993. The first BDMS has been operational at Ural Electrochemical Integrated Plant, Novouralsk, since February 1999 and is successfully providing HEU transparency data to the United States. The second BDMS was installed at ECP in February 2003. The FMFM makes use of a set of thermalized californium-252 ({sup 252}Cf) spontaneous neutron sources for a modulated fission activation of the UF{sub 6} gas stream for measuring the {sup 235}U fissile mass flow rate. To do this, the FMFM measures the transport time of the fission fragments created from the fission activation process under the modulated source to the downstream detectors by detecting the delayed gamma rays from the fission fragments. The FMFM provides unattended, nonintrusive measurements of the {sup 235}U mass flow in the HEU, LEU blend stock, and P-LEU process legs. The FMFM also provides the traceability of the HEU flow to the product process leg. This report documents the technical installation requirements and the expected operational characteristics of the ECP FMFM.

  13. An experimental and numerical study of the flow and mass transfer in a model of the wearable artificial kidney dialyzer

    Directory of Open Access Journals (Sweden)

    Rosenfeld Moshe

    2010-05-01

    Full Text Available Abstract Background Published studies of the past decades have established that mass transfer across the dialyzer membrane is governed by diffusion, convection and osmosis. While the former is independent of the pressure in the liquids, the latter two are pressure dependent and are enhanced when the pressure difference across the membrane is increased. The goal of the present study is to examine the impact of pulsatile flow on the transport phenomena across the membrane of a high-flux dialyzer in a wearable artificial kidney (WAK with a novel single small battery-operated pulsatile pump that drives both the blood and dialysate in a counter-phased manner, maximizing the trans-membrane pressure. Methods Both in-vitro experimental and numerical tools are employed to compare the performance of the pulsatile WAK dialyzer with a traditional design of a single-channel roller blood pump together with a centrifugal pump that drives the dialysate flow. The numerical methods utilize the axisymmetric Navier-Stokes and mass transfer equations to model the flow in the fibers of the dialyzer. Results While diffusion is still the dominating transport regime, the WAK pump enhances substantially the trans-membrane pressure and thus increases mass convection that might be as high as 30% of the overall transfer. This increase is obtained due to the design of the pulsatile WAK pump that increases ultrafiltration by increasing the trans-membrane pressure. Conclusions The experimental and numerical results revealed that when pumping at similar flow rates, a small battery-operated pulsatile pump provides clearances of urea and creatinine similar as or better than a large heavy AC-powered roller pump.

  14. Measuring and modelling air mass flow rate in the injection stretch blow moulding process

    OpenAIRE

    Salomeia, Y.; Menary, G. H.; Armstrong, C G; Nixon, J; S. Yan

    2016-01-01

    The injection stretch blow moulding process involves the inflation and stretching of a hot preform into a mould to form bottles. A critical process variable and an essential input for process simulations is the rate of pressure increase within the preform during forming, which is regulated by an air flow restrictor valve. The paper describes a set of experiments for measuring the air flow rate within an industrial ISBM machine and the subsequent modelling of it with the FEA package ABAQUS. Tw...

  15. Compressible Flow Produced by Distributed Sources of Mass: An Exact Solution

    OpenAIRE

    Clarke, J. F.

    1987-01-01

    The paper considers the case of a one-dimensional isentropic unsteady compressible flow that is driven entirely by a distribution of sources in the left-hand half space of an unbounded domain. The right-hand half-space contains no sources, so that source-strength drops discontinuously to zero as one crosses from left to right-hand space. Exact solutions are obtained for those parts of the flow that remain isentropic.

  16. Relationships of dispersive mass transport and stochastic convective flow through hydrologic systems

    Energy Technology Data Exchange (ETDEWEB)

    Simmons, C.S.

    1981-01-01

    Uncertainty in water flow velocity appears to be a major factor in determining the magnitude of contaminant dispersion expected in a ground water system. This report discusses some concepts and mathematical methods relating dispersive contaminant transport to stochastic aspects of ground water flow. The theory developed should not be construed as absolutely rigorous mathematics, but is presented with the intention of clarifying the physical concepts.

  17. Soil CO2 emissions as a proxy for heat and mass flow assessment, Taupō Volcanic Zone, New Zealand

    Science.gov (United States)

    Bloomberg, S.; Werner, Cynthia A.; Rissmann, C.F.; Mazot, A.; Horton, Travis B.; Gravley, D; Kennedy, B.; Oze, C

    2014-01-01

    The quantification of heat and mass flow between deep reservoirs and the surface is important for understanding magmatic and hydrothermal systems. Here, we use high-resolution measurement of carbon dioxide flux (φCO2) and heat flow at the surface to characterize the mass (CO2 and steam) and heat released to the atmosphere from two magma-hydrothermal systems. Our soil gas and heat flow surveys at Rotokawa and White Island in the Taupō Volcanic Zone, New Zealand, include over 3000 direct measurements of φCO2 and soil temperature and 60 carbon isotopic values on soil gases. Carbon dioxide flux was separated into background and magmatic/hydrothermal populations based on the measured values and isotopic characterization. Total CO2 emission rates (ΣCO2) of 441 ± 84 t d−1 and 124 ± 18 t d−1were calculated for Rotokawa (2.9 km2) and for the crater floor at White Island (0.3 km2), respectively. The total CO2 emissions differ from previously published values by +386 t d−1 at Rotokawa and +25 t d−1 at White Island, demonstrating that earlier research underestimated emissions by 700% (Rotokawa) and 25% (White Island). These differences suggest that soil CO2 emissions facilitate more robust estimates of the thermal energy and mass flux in geothermal systems than traditional approaches. Combining the magmatic/hydrothermal-sourced CO2 emission (constrained using stable isotopes) with reservoir H2O:CO2mass ratios and the enthalpy of evaporation, the surface expression of thermal energy release for the Rotokawa hydrothermal system (226 MWt) is 10 times greater than the White Island crater floor (22.5 MWt).

  18. Electrophoresis assisted time-of-flow mass spectrometry using hollow nanomechanical resonators

    National Research Council Canada - National Science Library

    Swathi Chaudhari; Kamalesh Chaudhari; Seokbeom Kim; Faheem Khan; Jungchul Lee; Thomas Thundat

    2017-01-01

    ...’ shaped hollow nanomechanical resonators (HNR). Capillary electrophoresis was coupled with the HNR based mass detection to overcome low ionic conductivity of channels embedded in the HNR preventing direct in-situ electrophoretic separation...

  19. Waves in The Communication Flow. The Interplay of Constitution, Legislative, and Governmental Institutions in Mass Media

    OpenAIRE

    Haase, Fee-Alexandra

    2007-01-01

    This is an international set of case studies in institutionalized communication control regarding Mass Media, comparing in the Constitution, written laws, and other national institutions the influence of the state regarding the production and function of mass communication and related values in different countries. Our interest is to demonstrate the differences between countries under the aspects of (1) National constitution and governmental institutions possibly providing guidelines in terms...

  20. Effects of non-Newtonian power law rheology on mass transport of a neutral solute for electro-osmotic flow in a porous microtube.

    Science.gov (United States)

    Mondal, Sourav; De, Sirshendu

    2013-01-01

    Mass transport of a neutral solute for a power law fluid in a porous microtube under electro-osmotic flow regime is characterized in this study. Combined electro-osmotic and pressure driven flow is conducted herein. An analytical solution of concentration profile within mass transfer boundary layer is derived from the first principle. The solute transport through the porous wall is also coupled with the electro-osmotic flow to predict the solute concentration in the permeate stream. The effects of non-Newtonian rheology and the operating conditions on the permeation rate and permeate solute concentration are analyzed in detail. Both cases of assisting (electro-osmotic and poiseulle flow are in same direction) and opposing flow (the individual flows are in opposite direction) cases are taken care of. Enhancement of Sherwood due to electro-osmotic flow for a non-porous conduit is also quantified. Effects if non-Newtonian rheology on Sherwood number enhancement are observed.

  1. Differentiation and characterization of isotopically modified silver nanoparticles in aqueous media using asymmetric-flow field flow fractionation coupled to optical detection and mass spectrometry.

    Science.gov (United States)

    Gigault, Julien; Hackley, Vincent A

    2013-02-06

    The principal objective of this work was to develop and demonstrate a new methodology for silver nanoparticle (AgNP) detection and characterization based on asymmetric-flow field flow fractionation (A4F) coupled on-line to multiple detectors and using stable isotopes of Ag. This analytical approach opens the door to address many relevant scientific challenges concerning the transport and fate of nanomaterials in natural systems. We show that A4F must be optimized in order to effectively fractionate AgNPs and larger colloidal Ag particles. With the optimized method one can accurately determine the size, stability and optical properties of AgNPs and their agglomerates under variable conditions. In this investigation, we couple A4F to optical absorbance (UV-vis spectrometer) and scattering detectors (static and dynamic) and to an inductively coupled plasma mass spectrometer. With this combination of detection modes it is possible to determine the mass isotopic signature of AgNPs as a function of their size and optical properties, providing specificity necessary for tracing and differentiating labeled AgNPs from their naturally occurring or anthropogenic analogs. The methodology was then applied to standard estuarine sediment by doping the suspension with a known quantity of isotopically enriched (109)AgNPs stabilized by natural organic matter (standard humic and fulvic acids). The mass signature of the isotopically enriched AgNPs was recorded as a function of the measured particle size. We observed that AgNPs interact with different particulate components of the sediment, and also self-associate to form agglomerates in this model estuarine system. This work should have substantial ramifications for research concerning the environmental and biological fate of AgNPs. Published by Elsevier B.V.

  2. Net Ecosystem Carbon Flux

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Net Ecosystem Carbon Flux is defined as the year-over-year change in Total Ecosystem Carbon Stock, or the net rate of carbon exchange between an ecosystem and the...

  3. Unsteady slip flow of Carreau nanofluid over a wedge with nonlinear radiation and new mass flux condition

    Directory of Open Access Journals (Sweden)

    M. Khan

    Full Text Available This article addresses a numerical investigation for the unsteady 2D slip flow of Carreau nanofluid past a static and/or moving wedge with the nonlinear radiation. A zero nanoparticle mass flux and convective boundary conditions are implemented. Further, the most recently devised model for nanofluid is adopted that incorporates the effects of Brownian motion and thermophoresis. A set of suitable transformation is demonstrated to alter the nonlinear partial differential equations into nonlinear ordinary differential equations and then tackled numerically by employing bvp4c in Matlab package. The numerical computations for the wall heat flux (Nusselt number and wall mass flux (Sherwood number are also performed. Effects of several controlling parameters on the velocity, temperature and nanoparticles concentration are explored and discussed in detail. Our study reveals that the temperature and the associated thermal boundary layer thickness are enhancing function of the temperature ratio parameter for both shear thickening and shear thinning fluids. Moreover, it is noticed that the velocity in case of moving wedge is higher than static wedge. Keywords: Unsteady wedge flow, Carreau nanofluid, Non-linear radiation, Velocity slip and nanoparticles mass flux conditions

  4. Planning long lasting insecticide treated net campaigns: should households' existing nets be taken into account?

    Science.gov (United States)

    Yukich, Joshua; Bennett, Adam; Keating, Joseph; Yukich, Rudy K; Lynch, Matt; Eisele, Thomas P; Kolaczinski, Kate

    2013-06-14

    Mass distribution of long-lasting insecticide treated bed nets (LLINs) has led to large increases in LLIN coverage in many African countries. As LLIN ownership levels increase, planners of future mass distributions face the challenge of deciding whether to ignore the nets already owned by households or to take these into account and attempt to target individuals or households without nets. Taking existing nets into account would reduce commodity costs but require more sophisticated, and potentially more costly, distribution procedures. The decision may also have implications for the average age of nets in use and therefore on the maintenance of universal LLIN coverage over time. A stochastic simulation model based on the NetCALC algorithm was used to determine the scenarios under which it would be cost saving to take existing nets into account, and the potential effects of doing so on the age profile of LLINs owned. The model accounted for variability in timing of distributions, concomitant use of continuous distribution systems, population growth, sampling error in pre-campaign coverage surveys, variable net 'decay' parameters and other factors including the feasibility and accuracy of identifying existing nets in the field. Results indicate that (i) where pre-campaign coverage is around 40% (of households owning at least 1 LLIN), accounting for existing nets in the campaign will have little effect on the mean age of the net population and (ii) even at pre-campaign coverage levels above 40%, an approach that reduces LLIN distribution requirements by taking existing nets into account may have only a small chance of being cost-saving overall, depending largely on the feasibility of identifying nets in the field. Based on existing literature the epidemiological implications of such a strategy is likely to vary by transmission setting, and the risks of leaving older nets in the field when accounting for existing nets must be considered. Where pre-campaign coverage

  5. Planning long lasting insecticide treated net campaigns: should households’ existing nets be taken into account?

    Science.gov (United States)

    2013-01-01

    Background Mass distribution of long-lasting insecticide treated bed nets (LLINs) has led to large increases in LLIN coverage in many African countries. As LLIN ownership levels increase, planners of future mass distributions face the challenge of deciding whether to ignore the nets already owned by households or to take these into account and attempt to target individuals or households without nets. Taking existing nets into account would reduce commodity costs but require more sophisticated, and potentially more costly, distribution procedures. The decision may also have implications for the average age of nets in use and therefore on the maintenance of universal LLIN coverage over time. Methods A stochastic simulation model based on the NetCALC algorithm was used to determine the scenarios under which it would be cost saving to take existing nets into account, and the potential effects of doing so on the age profile of LLINs owned. The model accounted for variability in timing of distributions, concomitant use of continuous distribution systems, population growth, sampling error in pre-campaign coverage surveys, variable net ‘decay’ parameters and other factors including the feasibility and accuracy of identifying existing nets in the field. Results Results indicate that (i) where pre-campaign coverage is around 40% (of households owning at least 1 LLIN), accounting for existing nets in the campaign will have little effect on the mean age of the net population and (ii) even at pre-campaign coverage levels above 40%, an approach that reduces LLIN distribution requirements by taking existing nets into account may have only a small chance of being cost-saving overall, depending largely on the feasibility of identifying nets in the field. Based on existing literature the epidemiological implications of such a strategy is likely to vary by transmission setting, and the risks of leaving older nets in the field when accounting for existing nets must be considered

  6. Crowd Flow Modeling of Athletes in Mass Sports Events -- a Macroscopic Approach

    CERN Document Server

    Treiber, Martin

    2014-01-01

    We propose a macroscopic model in form of a dispersion-transport equation for non-congested flow of the athletes which is coupled to a kinematic-wave model for congested flow. The model takes into account the performance (i.e., free-flow speed distributions) of the athletes in the different starting groups. The model is calibrated and validated on data of the German $\\textit{Rennsteig Half Marathon 2012}$ and the Swedish $\\textit{Vasaloppet 2012}$ cross-country ski race. Simulations of the model allow the event managers to improve the organization by determining the optimum number of starting groups, the maximum size of each group, whether a wave start with a certain starting delay between the groups is necessary, or what will be the effects of changing the course. We apply the model to simulate a planned course change for the Rennsteig Half Marathon 2013, and determine whether critical congestions are likely to occur.

  7. Approximation methods for stochastic petri nets

    Science.gov (United States)

    Jungnitz, Hauke Joerg

    1992-01-01

    Stochastic Marked Graphs are a concurrent decision free formalism provided with a powerful synchronization mechanism generalizing conventional Fork Join Queueing Networks. In some particular cases the analysis of the throughput can be done analytically. Otherwise the analysis suffers from the classical state explosion problem. Embedded in the divide and conquer paradigm, approximation techniques are introduced for the analysis of stochastic marked graphs and Macroplace/Macrotransition-nets (MPMT-nets), a new subclass introduced herein. MPMT-nets are a subclass of Petri nets that allow limited choice, concurrency and sharing of resources. The modeling power of MPMT is much larger than that of marked graphs, e.g., MPMT-nets can model manufacturing flow lines with unreliable machines and dataflow graphs where choice and synchronization occur. The basic idea leads to the notion of a cut to split the original net system into two subnets. The cuts lead to two aggregated net systems where one of the subnets is reduced to a single transition. A further reduction leads to a basic skeleton. The generalization of the idea leads to multiple cuts, where single cuts can be applied recursively leading to a hierarchical decomposition. Based on the decomposition, a response time approximation technique for the performance analysis is introduced. Also, delay equivalence, which has previously been introduced in the context of marked graphs by Woodside et al., Marie's method and flow equivalent aggregation are applied to the aggregated net systems. The experimental results show that response time approximation converges quickly and shows reasonable accuracy in most cases. The convergence of Marie's method and flow equivalent aggregation are applied to the aggregated net systems. The experimental results show that response time approximation converges quickly and shows reasonable accuracy in most cases. The convergence of Marie's is slower, but the accuracy is generally better. Delay

  8. Optimization of plasma sampling depth and aerosol gas flow rates for single particle inductively coupled plasma mass spectrometry analysis.

    Science.gov (United States)

    Kálomista, Ildikó; Kéri, Albert; Galbács, Gábor

    2017-09-01

    We performed experiments to assess the separate and also the combined effect of the sampling depth and the aerosol gas flow rates on the signal formation in single particle inductively coupled plasma mass spectrometry (spICP-MS) measurements by using dispersions containing Ag and Au NPs. It was found that the NP signal can significantly be improved by the optimization of the sampling depth. With respect to the "robust" setting, a signal improvement of nearly 100% could be achieved, which translates into a 25-30% improvement in size detection limits. It was also found that the shape of the spICP-MS signal histograms also change with the change of the plasma sampling depth. It was demonstrated that nanoparticle peak separation can also be significantly enhanced by using sampling depth optimization. The effect of the aerosol dilution gas flow, now standard in most ICP-MS instruments, on the spICP-MS signal formation was also studied for the first time in the literature, as this flow was hoped to make spICP-MS measurements more practical and faster via the on-line dilution of the aerosol generated from nano-dispersions. Our experimental results revealed that the dilution gas flow can only be used for a moderate aerosol dilution in spICP-MS measurements, if the gas flow going to the pneumatic nebulizer is proportionally lowered at the same time. This however was found to cause a significant worsening in the operation of the sample introduction system, which gives rise to a strong NP signal loss. Thus it was concluded that the use of the aerosol dilution gas flow, in its present form, can not be suggested for spICP-MS analysis. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Top-down and bottom-up lipidomic analysis of rabbit lipoproteins under different metabolic conditions using flow field-flow fractionation, nanoflow liquid chromatography and mass spectrometry.

    Science.gov (United States)

    Byeon, Seul Kee; Kim, Jin Yong; Lee, Ju Yong; Chung, Bong Chul; Seo, Hong Seog; Moon, Myeong Hee

    2015-07-31

    This study demonstrated the performances of top-down and bottom-up approaches in lipidomic analysis of lipoproteins from rabbits raised under different metabolic conditions: healthy controls, carrageenan-induced inflammation, dehydration, high cholesterol (HC) diet, and highest cholesterol diet with inflammation (HCI). In the bottom-up approach, the high density lipoproteins (HDL) and the low density lipoproteins (LDL) were size-sorted and collected on a semi-preparative scale using a multiplexed hollow fiber flow field-flow fractionation (MxHF5), followed by nanoflow liquid chromatography-ESI-MS/MS (nLC-ESI-MS/MS) analysis of the lipids extracted from each lipoprotein fraction. In the top-down method, size-fractionated lipoproteins were directly infused to MS for quantitative analysis of targeted lipids using chip-type asymmetrical flow field-flow fractionation-electrospray ionization-tandem mass spectrometry (cAF4-ESI-MS/MS) in selected reaction monitoring (SRM) mode. The comprehensive bottom-up analysis yielded 122 and 104 lipids from HDL and LDL, respectively. Rabbits within the HC and HCI groups had lipid patterns that contrasted most substantially from those of controls, suggesting that HC diet significantly alters the lipid composition of lipoproteins. Among the identified lipids, 20 lipid species that exhibited large differences (>10-fold) were selected as targets for the top-down quantitative analysis in order to compare the results with those from the bottom-up method. Statistical comparison of the results from the two methods revealed that the results were not significantly different for most of the selected species, except for those species with only small differences in concentration between groups. The current study demonstrated that top-down lipid analysis using cAF4-ESI-MS/MS is a powerful high-speed analytical platform for targeted lipidomic analysis that does not require the extraction of lipids from blood samples. Copyright © 2015 Elsevier B

  10. NUMERICAL STUDY OF MICROPOLAR FLUID FLOW HEAT AND MASS TRANSFER OVER VERTICAL PLATE: EFFECTS OF THERMAL RADIATION AND MAGNETIC FIELD

    Directory of Open Access Journals (Sweden)

    REDHA ALOUAOUI

    2015-06-01

    Full Text Available In this paper, we examine the thermal radiation effect on heat and mass transfer in steady laminar boundary layer flow of an incompressible viscous micropolar fluid over a vertical flat plate, with the presence of a magnetic field. Rosseland approximation is applied to describe the radiative heat flux in the energy equation. The resulting similarity equations are solved numerically. Many results are obtained and representative set is displayed graphically to illustrate the influence of the various parameters on different profiles. The conclusion is drawn that the flow field, temperature, concentration and microrotation  as well as the skin friction coefficient and the both  local Nusselt and Sherwood numbers  are significantly influenced by Magnetic parameter, material parameter  and thermal radiation parameter.

  11. The effect of netting solidity ratio and inclined angle on the hydrodynamic characteristics of knotless polyethylene netting

    Science.gov (United States)

    Tang, Hao; Hu, Fuxiang; Xu, Liuxiong; Dong, Shuchuang; Zhou, Cheng; Wang, Xuefang

    2017-10-01

    Knotless polyethylene (PE) netting has been widely used in aquaculture cages and fishing gears, especially in Japan. In this study, the hydrodynamic coefficient of six knotless PE netting panels with different solidity ratios were assessed in a flume tank under various attack angles of netting from 0° (parallel to flow) to 90° (perpendicular to flow) and current speeds from 40 cm s-1 to 130 cm s-1. It was found that the drag coefficient was related to Reynolds number, solidity ratio and attack angle of netting. The solidity ratio was positively related with drag coefficient for netting panel perpendicular to flow, whereas when setting the netting panel parallel to the flow the opposite result was obtained. For netting panels placed at an angle to the flow, the lift coefficient reached the maximum at an attack angle of 50° and then decreased as the attack angle further increased. The solidity ratio had a dual influence on drag coefficient of inclined netting panels. Compared to result in the literature, the normal drag coefficient of knotless PE netting measured in this study is larger than that of nylon netting or Dyneema netting.

  12. Water and mass budgets of a vertical-flow constructed wetland used for wastewater treatment

    NARCIS (Netherlands)

    Meuleman, Arthur F M; Van Logtestijn, Richard; Rijs, Gerard B J; Verhoeven, Jos T A

    To estimate the nutrient and organic matter (Biological Oxygen Demand (BODs) and Chemical Oxygen Demand (COD)) removal capacity of a constructed vertical-flow wetland in The Netherlands, a water and nutrient budget study was conducted. Also bacterial water quality enhancement was measured. The

  13. MassFLOW-3D as a simulation tool for turbidity currents

    NARCIS (Netherlands)

    Basani, Riccardo; Janocko, Michal; Cartigny, Matthieu J.B.; Hansen, Ernst W.M.; Eggenhuisen, Joris T.

    2014-01-01

    Turbidity currents are the most important mechanism for the dispersal and deposition of sand in the deep-sea setting and thus the main phenomenon leading to the formation of oil and gas reservoirs in deep water deposits. The flow characteristics of turbidity currents are difficult to observe and

  14. A flow-injection mass spectrometry fingerprinting method for authentication and quality assessment of Scutellaria lateriflora-based dietary supplements.

    Science.gov (United States)

    Sun, Jianghao; Chen, Pei

    2011-09-01

    Scutellaria lateriflora, commonly known as skullcap, is used as an ingredient in numerous herbal products. However, it has been occasionally adulterated/contaminated with Teucrium canadense and/or Teucrium chamaedrys, commonly known as germander, due to the morphological similarities between the two genera. The latter contains hepatotoxic diterpenes. Despite the potential hepatotoxicity introduced by germander contamination, analytical methodologies for the authentication and quality assessment of S. lateriflora-based dietary supplements have not been reported. In this study, a flow-injection/mass spectrometry fingerprinting method in combination with principal component analysis was used to survey S. lateriflora-based dietary supplements sold in the USA.

  15. Ultrasensitive Ambient Mass Spectrometric Analysis with a Pin-to-Capillary Flowing Atmospheric-Pressure Afterglow Source

    Science.gov (United States)

    Shelley, Jacob T.; Wiley, Joshua S.; Hieftje, Gary M.

    2011-01-01

    The advent of ambient desorption/ionization mass spectrometry has resulted in a strong interest in ionization sources that are capable of direct analyte sampling and ionization. One source that has enjoyed increasing interest is the Flowing Atmospheric-Pressure Afterglow (FAPA). FAPA has been proven capable of directly desorbing/ionizing samples in any phase (solid, liquid, or gas) and with impressive limits of detection (explosives. A detection limit of 4 amol was found for the direct determination of the agrochemical ametryn, and appears to be spectrometer-limited. The ability to quickly screen for analytes in bulk liquid samples with the pin-to-capillary FAPA is also shown. PMID:21627097

  16. Blend Down Monitoring System Fissile Mass Flow Monitor and its Implementation at the Siberian Chemical Enterprise, Seversk, Russia

    Energy Technology Data Exchange (ETDEWEB)

    Uckan, T

    2005-07-28

    In this paper the implementation plans and preparations for installation of the Fissile Mass Flow Monitor (FMFM) equipment at the Siberian Chemical Enterprise (SChE), Seversk, Russia, are presented. The FMFM, developed by Oak Ridge National Laboratory, is part of the Blend Down Monitoring System (BDMS) for the U.S. Department of Energy Highly Enriched Uranium (HEU) Transparency Implementation Program. The BDMS provides confidence to the United States that the Russian nuclear facilities supplying the lower assay ({approx}4%) product low enriched uranium (PLEU) to the United States from down-blended weapon-grade HEU are meeting the nonproliferation goals of the government-to-government HEU purchase agreement signed between the Russian Federation and the United States in 1993. The first BDMS has been operational at Ural Electrochemical Integrated Plant, Novouralsk, since February 1999. The second BDMS has been operational at Electro Chemical Plant, Zelenogorsk, since March 2003. These systems are successfully providing HEU transparency data to the United States. The third BDMS was successfully installed on the HEU down-blending tee in the SChE Enrichment Plant in October 2004. The FMFM makes use of a set of thermalized {sup 252}Cf spontaneous neutron sources for modulated fission activation of the UF{sub 6} gas stream for measuring the {sup 235}U fissile mass flow rate. To do this, the FMFM measures the transport time of the fission fragments created from the fission activation process under the modulated source to the downstream detectors by detecting the delayed gamma rays from the fission fragments retained in the flow. The FMFM provides unattended nonintrusive measurements of the {sup 235}U mass flow of the UF{sub 6} gas in the blending tee legs of HEU, the LEU blend stock, and the resulting P-LEU. The FMFM also confirms that highly enriched UF{sub 6} gas identified in the HEU leg flows through the blending tee into the P-LEU leg. This report contains details of

  17. A mass-conserving lattice Boltzmann method with dynamic grid refinement for immiscible two-phase flows

    Energy Technology Data Exchange (ETDEWEB)

    Fakhari, Abbas, E-mail: afakhari@nd.edu [Department of Civil and Environmental Engineering and Earth Sciences, University of Notre Dame, Notre Dame, IN 46556 (United States); Geier, Martin [TU Braunschweig, Institute for Computational Modeling in Civil Engineering (iRMB), TU-Braunschweig, Pockelsstr. 3, 38106 Braunschweig (Germany); Lee, Taehun [Department of Mechanical Engineering, The City College of the City University of New York, New York, NY 10031 (United States)

    2016-06-15

    A mass-conserving lattice Boltzmann method (LBM) for multiphase flows is presented in this paper. The proposed LBM improves a previous model (Lee and Liu, 2010 [21]) in terms of mass conservation, speed-up, and efficiency, and also extends its capabilities for implementation on non-uniform grids. The presented model consists of a phase-field lattice Boltzmann equation (LBE) for tracking the interface between different fluids and a pressure-evolution LBM for recovering the hydrodynamic properties. In addition to the mass conservation property and the simplicity of the algorithm, the advantages of the current phase-field LBE are that it is an order of magnitude faster than the previous interface tracking LBE proposed by Lee and Liu (2010) [21] and it requires less memory resources for data storage. Meanwhile, the pressure-evolution LBM is equipped with a multi-relaxation-time (MRT) collision operator to facilitate attainability of small relaxation rates thereby allowing simulation of multiphase flows at higher Reynolds numbers. Additionally, we reformulate the presented MRT-LBM on nonuniform grids within an adaptive mesh refinement (AMR) framework. Various benchmark studies such as a rising bubble and a falling drop under buoyancy, droplet splashing on a wet surface, and droplet coalescence onto a fluid interface are conducted to examine the accuracy and versatility of the proposed AMR-LBM. The proposed model is further validated by comparing the results with other LB models on uniform grids. A factor of about 20 in savings of computational resources is achieved by using the proposed AMR-LBM. As a more demanding application, the Kelvin–Helmholtz instability (KHI) of a shear-layer flow is investigated for both density-matched and density-stratified binary fluids. The KHI results of the density-matched fluids are shown to be in good agreement with the benchmark AMR results based on the sharp-interface approach. When a density contrast between the two fluids exists, a

  18. Professional Enterprise NET

    CERN Document Server

    Arking, Jon

    2010-01-01

    Comprehensive coverage to help experienced .NET developers create flexible, extensible enterprise application code If you're an experienced Microsoft .NET developer, you'll find in this book a road map to the latest enterprise development methodologies. It covers the tools you will use in addition to Visual Studio, including Spring.NET and nUnit, and applies to development with ASP.NET, C#, VB, Office (VBA), and database. You will find comprehensive coverage of the tools and practices that professional .NET developers need to master in order to build enterprise more flexible, testable, and ext

  19. Flow

    DEFF Research Database (Denmark)

    2009-01-01

    Flow er en positiv, koncentreret tilstand, hvor al opmærksomhed er samlet om en bestemt aktivitet, som er så krævende og engagerende, at man må anvende mange mentale ressourcer for at klare den. Tidsfornemmelsen forsvinder, og man glemmer sig selv. 'Flow' er den første af en række udsendelser om...

  20. Convective flow, heat and mass transfer of Ostwald-de Waele fluid over a vertical stretching sheet

    Directory of Open Access Journals (Sweden)

    K. Vajravelu

    2017-01-01

    Full Text Available In this paper we study the combined buoyancy (due to thermal and species diffusion effects on the flow, heat and mass transfer of a viscous, incompressible, Ostwald-de Waele fluid over a vertical stretching surface in the presence of a chemical reaction. The effects of variable thermal conductivity and the variable mass diffusivity are also considered. A similarity transformation is used to convert the partial differential equations into coupled nonlinear ordinary differential equations. Numerical solutions are obtained by the Keller-box method. The influences of sundry parameters on the velocity, temperature and the concentration fields are presented in figures and discussed in detail. The values of the skin friction coefficient, Nusselt number and the surface mass transfer for various values of the governing parameters are presented in tables. One of the interesting observations is that the influence of the buoyancy parameters increases the velocity. However, quite the opposite is true with the temperature and the mass concentration, for all values of the power law index and the reaction rate parameter. The results obtained reveal many interesting behaviors that warrant a further study of the non-Newtonian fluid phenomena, especially shear thinning phenomena. Shear thinning reduces the wall shear stress.

  1. Unsteady free convection and mass transfer flow of a non-newtonian ...

    African Journals Online (AJOL)

    We study the unsteady free convection and mass transfer of a non-Newtonian fluid past an infinite vertical plate in the presence of thermal diffusion. Closed form analytical solutions are obtained for the concentration and the temperature distributions by means of the Laplace transform technique on the assumption that the ...

  2. Experimental energy harvesting from fluid flow by using two vibrating masses

    Science.gov (United States)

    Nishi, Yoshiki; Fukuda, Kengo; Shinohara, Wataru

    2017-04-01

    In this study, an experiment was performed to determine how the addition of a second degree of freedom to a vibratory system affects its energy extraction from a surrounding fluid flow. A circular cylinder was submerged underwater and subjected to flow, and another cylinder mounted on springs was inserted between the submerged cylinder and a generator. The experiment results demonstrated that vortex-induced vibration occurred at frequencies that were locked-in to the first and second natural modes for reduced velocity ranges of 5.0-9.0 and greater than 12.0, respectively. The output voltages were particularly high when the vibration frequency was locked-in to that of the second natural mode. It was found that application of energy extraction using a system with two degrees of freedom can widen the range of reduced velocity within which power extraction is effective.

  3. Mass and energy flow near sunspots. I - Observations of moat properties

    Science.gov (United States)

    Brickhouse, Nancy S.; Labonte, Barry J.

    1988-01-01

    New measurements of the velocities of moving magnetic features (MMFs) are made from spectroheliograms and filtergrams. The sample includes 200 MMFs found in the moats surrounding 7 different sunspots. Our data are compiled with the data from other authors to uncover common properties of moats. The moat radius is roughly twice the penumbral radius. No significant correlation between the average moat velocity or angular extent and any noted property of the spot or moat (size, age, stage of development) is found. Individual MMFs move radially outward with a constant speed, but nearby MMFs may have quite different speeds. The average moat speed is twice the supergranule flow speed. The speed of MMFs in moats is equal on average to the surface gas flow speed. A large bias is found in much of the existing observations of moat speeds from MMFs.

  4. Altered Blood Flow Response to Small Muscle Mass Exercise in Cancer Survivors Treated With Adjuvant Therapy.

    Science.gov (United States)

    Didier, Kaylin D; Ederer, Austin K; Reiter, Landon K; Brown, Michael; Hardy, Rachel; Caldwell, Jacob; Black, Christopher; Bemben, Michael G; Ade, Carl J

    2017-02-07

    Adjuvant cancer treatments have been shown to decrease cardiac function. In addition to changes in cardiovascular risk, there are several additional functional consequences including decreases in exercise capacity and increased incidence of cancer-related fatigue. However, the effects of adjuvant cancer treatment on peripheral vascular function during exercise in cancer survivors have not been well documented. We investigated the vascular responses to exercise in cancer survivors previously treated with adjuvant cancer therapies. Peripheral vascular responses were investigated in 11 cancer survivors previously treated with adjuvant cancer therapies (age 58±6 years, 34±30 months from diagnosis) and 9 healthy controls group matched for age, sex, and maximal voluntary contraction. A dynamic handgrip exercise test at 20% maximal voluntary contraction was performed with simultaneous measurements of forearm blood flow and mean arterial pressure. Forearm vascular conductance was calculated from forearm blood flow and mean arterial pressure. Left ventricular ejection time index (LVETi) was derived from the arterial pressure wave form. Forearm blood flow was attenuated in cancer therapies compared to control at 20% maximal voluntary contraction (189.8±53.8 vs 247.9±80.3 mL·min(-1), respectively). Forearm vascular conductance was not different between groups at rest or during exercise. Mean arterial pressure response to exercise was attenuated in cancer therapies compared to controls (107.8±10.8 vs 119.2±16.2 mm Hg). LEVTi was lower in cancer therapies compared to controls. These data suggest an attenuated exercise blood flow response in cancer survivors ≈34 months following adjuvant cancer therapy that may be attributed to an attenuated increase in mean arterial pressure. © 2017 The Authors. Published on behalf of the American Heart Association, Inc., by Wiley Blackwell.

  5. Double-muscled and conventional cattle have the same net energy requirements if these are related to mature and current body protein mass, and to gain composition.

    Science.gov (United States)

    Schiavon, S; Bittante, G

    2012-11-01

    The hypothesis tested in this paper is that double-muscled (DBM) and conventional cattle, considerably differing in body composition, have similar NE requirements when: a) NE(m) is scaled as a function of current (P(i)) and adult (P(m)) protein mass; and b) ME for gain (ME(g)) is estimated from protein (Pr) and lipid (Lr) retention and their partial ME use efficiencies, the k(p) and k(l) values, respectively. First, 2 databases were examined: 1 was developed combining well known literature information from comparative slaughter trials conducted on British beef steers; the other was based on a trial conducted using extremely lean DBM Piemontese bulls. From the first database, NE(m) was calculated to be 1.625 × P(i) ÷ P(m) × P(m)(0.73) (MJ/kg(0.73)). From the second database, the daily ME(g) was determined as 22.8 MJ × Pr ÷ k(p) + 38.74 MJ × Lr ÷ k(l), assuming (from prior reports) that k(p) = 0.20 and k(l) = 0.75. Thereafter, ME(m) was defined as ME intake minus ME(g), and, hence, NE(m) was predicted as 1.625 × P(i) ÷ P(m) × P(m)(0.73) (where 1.625 was the value obtained from the first dataset). The resulting k(m) (NE(m)/ME(m)) averaged 0.67. This k(m) value did not differ from that (0.65; P = 0.12) predicted by Garrett's equation, which uses dietary ME content as the only predictive variable. Second, the procedure was tested for the ability to detect effects on k(m) caused by increasing BW and dietary factors not estimable from the dietary ME content only. Data were gathered from a trial involving 48 DBM Piemontese bulls divided into 4 groups fed 1 of 4 diets differing in CP content (145 or 108 g/kg DM), with or without addition of 80 g/d of rumen-protected CLA (rpCLA). Bulls were examined at 3 consecutive periods of growth, corresponding to 365, 512 and 631 kg of average BW. All energy balance items were influenced by increasing BW, except k(m) (P = 0.61), in agreement with the expectation that NE(m) requirement depends on the degree of maturity (P

  6. Debris flow initiation by runoff in a recently burned basin: Is grain-by-grain sediment bulking or en masse failure to blame?

    Science.gov (United States)

    McGuire, Luke; Rengers, Francis; Kean, Jason W.; Staley, Dennis M.

    2017-01-01

    Postwildfire debris flows are frequently triggered by runoff following high-intensity rainfall, but the physical mechanisms by which water-dominated flows transition to debris flows are poorly understood relative to debris flow initiation from shallow landslides. In this study, we combined a numerical model with high-resolution hydrologic and geomorphic data sets to test two different hypotheses for debris flow initiation during a rainfall event that produced numerous debris flows within a recently burned drainage basin. Based on simulations, large volumes of sediment eroded from the hillslopes were redeposited within the channel network throughout the storm, leading to the initiation of numerous debris flows as a result of the mass failure of sediment dams that built up within the channel. More generally, results provide a quantitative framework for assessing the potential of runoff-generated debris flows based on sediment supply and hydrologic conditions.

  7. Debris flow initiation by runoff in a recently burned basin: Is grain-by-grain sediment bulking or en masse failure to blame?

    Science.gov (United States)

    McGuire, Luke A.; Rengers, Francis K.; Kean, Jason W.; Staley, Dennis M.

    2017-07-01

    Postwildfire debris flows are frequently triggered by runoff following high-intensity rainfall, but the physical mechanisms by which water-dominated flows transition to debris flows are poorly understood relative to debris flow initiation from shallow landslides. In this study, we combined a numerical model with high-resolution hydrologic and geomorphic data sets to test two different hypotheses for debris flow initiation during a rainfall event that produced numerous debris flows within a recently burned drainage basin. Based on simulations, large volumes of sediment eroded from the hillslopes were redeposited within the channel network throughout the storm, leading to the initiation of numerous debris flows as a result of the mass failure of sediment dams that built up within the channel. More generally, results provide a quantitative framework for assessing the potential of runoff-generated debris flows based on sediment supply and hydrologic conditions.

  8. Modeling and Optimization of Collaborative Passenger Control in Urban Rail Stations under Mass Passenger Flow

    Directory of Open Access Journals (Sweden)

    Lili Wang

    2015-01-01

    Full Text Available With the rapid development of urban rail transit, the phenomenon of outburst passenger flows flocking to stations is occurring much more frequently. Passenger flow control is one of the main methods used to ensure passengers’ safety. While most previous studies have only focused on control measures inside the target station, ignoring the collaboration between stops, this paper puts emphasis on joint passenger control methods during the occurrence of large passenger flows. To provide a theoretic description for the problem under consideration, an integer programming model is built, based on the analysis of passenger delay and the processes by which passengers alight and board. Taking average passenger delay as the objective, the proposed model aims to disperse the pressure of oversaturated stations into others, achieving the optimal state for the entire line. The model is verified using a case study and the results show that restricted access measures taken collaboratively by stations produce less delay and faster evacuation. Finally, a sensitivity analysis is conducted, from which we find that the departure interval and maximum conveying capacity of the train affect passenger delay markedly in the process of passenger control and infer that control measures should be taken at stations near to the one experiencing an emergency.

  9. An improved methodology of asymmetric flow field flow fractionation hyphenated with inductively coupled mass spectrometry for the determination of size distribution of gold nanoparticles in dietary supplements.

    Science.gov (United States)

    Mudalige, Thilak K; Qu, Haiou; Linder, Sean W

    2015-11-13

    Engineered nanoparticles are available in large numbers of commercial products claiming various health benefits. Nanoparticle absorption, distribution, metabolism, excretion, and toxicity in a biological system are dependent on particle size, thus the determination of size and size distribution is essential for full characterization. Number based average size and size distribution is a major parameter for full characterization of the nanoparticle. In the case of polydispersed samples, large numbers of particles are needed to obtain accurate size distribution data. Herein, we report a rapid methodology, demonstrating improved nanoparticle recovery and excellent size resolution, for the characterization of gold nanoparticles in dietary supplements using asymmetric flow field flow fractionation coupled with visible absorption spectrometry and inductively coupled plasma mass spectrometry. A linear relationship between gold nanoparticle size and retention times was observed, and used for characterization of unknown samples. The particle size results from unknown samples were compared to results from traditional size analysis by transmission electron microscopy, and found to have less than a 5% deviation in size for unknown product over the size range from 7 to 30 nm. Published by Elsevier B.V.

  10. Automated work-flow for processing high-resolution direct infusion electrospray ionization mass spectral fingerprints

    DEFF Research Database (Denmark)

    Hansen, Michael Adsetts Edberg; Smedsgaard, Jørn

    2007-01-01

    an automated data processing pipeline to compare large numbers of fingerprint spectra from direct infusion experiments analyzed by high resolution MS. We describe some of the intriguing problems that have to be addressed. starting with the conversion and pre-processing of the raw data to the final data...... analysis. Illustrated on the direct infusion analysis (ESI-TOF-MS) of complex mixtures the method exploits the full quality of the high-resolution present in the mass spectra. Although the method is illustrated as a new library search method for high resolution MS, we demonstrate that the output...... of the preprocessing is applicable to cluster-, discriminant analysis, and related multivariate methods applied directly to mass spectra from direct infusion analysis of crude extracts. This is done to find the relationship between several terverticillate Penicillium species and identify the ions responsible...

  11. An initial study on modeling the global thermal and fast reactor fuel cycle mass flow using Vensim

    Energy Technology Data Exchange (ETDEWEB)

    Brinton, Samuel [Kansas State University, Mechanical Engineering, Manhattan, KS 66506 (United States)

    2008-07-01

    This study concentrated on modeling the construction and decommissioning rates of five major facilities comprising the nuclear fuel cycle: (1) current LWRs with a 60-year service life, (2) new LWRs burning MOX fuel, (3) new LWRs to replace units in the current fleet, (4) new FRs to be added to the fleet, and (5) new spent fuel reprocessing facilities. This is a mass flow mode starting from uranium ore and following it to spent forms. The visual dynamic modeling program Vensim was used to create a system of equations and variables to track the mass flows from enrichment, fabrication, burn-up, and the back-end of the fuel cycle. The scenarios considered provide estimates of the uranium ore requirements, quantities of LLW and HLW production, and the number of reprocessing facilities necessary to reduce recently reported levels of spent fuel inventory. Preliminary results indicate that the entire national spent fuel inventory produced in the next 100 years can be reprocessed with a reprocessing plant built every 11 years (small capacity) or even as low as every 23 years (large capacity). (authors)

  12. Computational Fluid Dynamics–Discrete Element Method (CFD-DEM) Study of Mass-Transfer Mechanisms in Riser Flow

    Science.gov (United States)

    2017-01-01

    We report a computational fluid dynamics–discrete element method (CFD-DEM) simulation study on the interplay between mass transfer and a heterogeneous catalyzed chemical reaction in cocurrent gas-particle flows as encountered in risers. Slip velocity, axial gas dispersion, gas bypassing, and particle mixing phenomena have been evaluated under riser flow conditions to study the complex system behavior in detail. The most important factors are found to be directly related to particle cluster formation. Low air-to-solids flux ratios lead to more heterogeneous systems, where the cluster formation is more pronounced and mass transfer more influenced. Falling clusters can be partially circumvented by the gas phase, which therefore does not fully interact with the cluster particles, leading to poor gas–solid contact efficiencies. Cluster gas–solid contact efficiencies are quantified at several gas superficial velocities, reaction rates, and dilution factors in order to gain more insight regarding the influence of clustering phenomena on the performance of riser reactors. PMID:28553011

  13. Computational Fluid Dynamics-Discrete Element Method (CFD-DEM) Study of Mass-Transfer Mechanisms in Riser Flow.

    Science.gov (United States)

    Carlos Varas, Álvaro E; Peters, E A J F; Kuipers, J A M

    2017-05-17

    We report a computational fluid dynamics-discrete element method (CFD-DEM) simulation study on the interplay between mass transfer and a heterogeneous catalyzed chemical reaction in cocurrent gas-particle flows as encountered in risers. Slip velocity, axial gas dispersion, gas bypassing, and particle mixing phenomena have been evaluated under riser flow conditions to study the complex system behavior in detail. The most important factors are found to be directly related to particle cluster formation. Low air-to-solids flux ratios lead to more heterogeneous systems, where the cluster formation is more pronounced and mass transfer more influenced. Falling clusters can be partially circumvented by the gas phase, which therefore does not fully interact with the cluster particles, leading to poor gas-solid contact efficiencies. Cluster gas-solid contact efficiencies are quantified at several gas superficial velocities, reaction rates, and dilution factors in order to gain more insight regarding the influence of clustering phenomena on the performance of riser reactors.

  14. Fast screening of lovastatin in red yeast rice products by flow injection tandem mass spectrometry.

    Science.gov (United States)

    Song, Fenhong; El-Demerdash, Aref; Lee, Shwn-Ji Susie H; Smith, Robert E

    2012-01-05

    Drug adulteration in dietary supplement materials is a world-wide problem and poses a regulatory challenge. Red yeast rice is a product used by consumers to lower blood levels of cholesterol. While most current methods to analyze red yeast rice are based on HPLC separation with a photo-diode array detector and/or a mass spectrometry detector, which takes 20-40min analysis time per sample, we developed a method to do fast screening of the active compound lovastatin by direct infusion into a mass spectrometer. This method takes under 1min per analysis on the instrument. By using multiple reaction monitoring with five product ions, all the ion ratios of the analyte in the samples are compared with those from the standards for qualitative analysis. The results from this method were compared to the result from the liquid chromatography tandem mass spectrometry, which uses retention time and one ion ratio as the confirmation criteria. No false positives or false negatives were found among the 12 samples tested. The method also seems to be effective in measuring the lovastatin in red yeast rice semi-quantitatively. This kind of method could be adapted to the screening of other dietary supplement products. Published by Elsevier B.V.

  15. Accuracy of delta 18O isotope ratio measurements on the same sample by continuous-flow isotope-ratio mass spectrometry

    Science.gov (United States)

    The doubly labeled water method is considered the reference method to measure energy expenditure. Conventional mass spectrometry requires a separate aliquot of the same sample to be prepared and analyzed separately. With continuous-flow isotope-ratio mass spectrometry, the same sample could be analy...

  16. Simultaneous estimation of local-scale and flow path-scale dual-domain mass transfer parameters using geoelectrical monitoring

    Science.gov (United States)

    Briggs, Martin A.; Day-Lewis, Frederick D.; Ong, John B.; Curtis, Gary P.; Lane, John W.

    2013-01-01

    Anomalous solute transport, modeled as rate-limited mass transfer, has an observable geoelectrical signature that can be exploited to infer the controlling parameters. Previous experiments indicate the combination of time-lapse geoelectrical and fluid conductivity measurements collected during ionic tracer experiments provides valuable insight into the exchange of solute between mobile and immobile porosity. Here, we use geoelectrical measurements to monitor tracer experiments at a former uranium mill tailings site in Naturita, Colorado. We use nonlinear regression to calibrate dual-domain mass transfer solute-transport models to field data. This method differs from previous approaches by calibrating the model simultaneously to observed fluid conductivity and geoelectrical tracer signals using two parameter scales: effective parameters for the flow path upgradient of the monitoring point and the parameters local to the monitoring point. We use regression statistics to rigorously evaluate the information content and sensitivity of fluid conductivity and geophysical data, demonstrating multiple scales of mass transfer parameters can simultaneously be estimated. Our results show, for the first time, field-scale spatial variability of mass transfer parameters (i.e., exchange-rate coefficient, porosity) between local and upgradient effective parameters; hence our approach provides insight into spatial variability and scaling behavior. Additional synthetic modeling is used to evaluate the scope of applicability of our approach, indicating greater range than earlier work using temporal moments and a Lagrangian-based Damköhler number. The introduced Eulerian-based Damköhler is useful for estimating tracer injection duration needed to evaluate mass transfer exchange rates that range over several orders of magnitude.

  17. Flow

    DEFF Research Database (Denmark)

    Knoop, Hans Henrik

    2006-01-01

    FLOW. Orden i hovedet på den fede måde Oplevelsesmæssigt er flow-tilstanden kendetegnet ved at man er fuldstændig involveret, fokuseret og koncentreret; at man oplever stor indre klarhed ved at vide hvad der skal gøres, og i hvilket omfang det lykkes; at man ved at det er muligt at løse opgaven...

  18. MATHEMATICAL MODELLING OF MASS EXCHANGE PROCESSES BETWEEN FLOW AND ALLUVIAL SEDIMENTS

    Directory of Open Access Journals (Sweden)

    M. R. Magomedova

    2017-01-01

    Full Text Available Objectives. The aim is to improve the mathematical model of the motion of channelfill deposits in terms of clarifying one of the main relationships on which the sediment flow rate depends: the frequency of pulsations of the vertical fluid velocity component with hydraulic flow parameters.Methods. The mathematical model is developed using probability theory and the theory of runs of random processes, taking into account the normal distribution of the horizontal and vertical components of the instantaneous flow velocities and the Rayleigh law of the distribution of their maxima.Results. As a result of the modelling, information was obtained concerning the volumes and areas of the zones of influence of increased turbidity on the aquatic bioresources of the Gizeldon River. The operation of the Gizeldon hydroelectric power station have led to the loss of zoobenthos habitats, the destruction of bottom biocenoses, the loss of food organisms of plankton and benthos, a decrease in the fodder base of fish and the direct death of the ichthyofauna. An assessment of the damage caused to aquatic bioresources from the operation of the Gizeldon hydroelectric power station was carried out. As a result, it was proved that the negative influence of the "turbidity loop" in the lower tail of the river, taking into account the critical values of suspended matter concentration in water will be traced for 3.7 km. The amount of damage to aquatic bioresources in physical terms is about 1.5 tons due to the destruction of the fodder base of fish and the deterioration of habitat conditions in the zone of increased turbidity.Conclusion. The results of mathematical modelling were tested on field data materials and used to calculate the turbidity of the Gizeldon River flow during the reconstruction of the Gizeldon hydroelectric power station. The results of the approbation of the mathematical model of the motion of channel-fill sediment are presented in order to identify the

  19. Leg blood flow is impaired during small muscle mass exercise in patients with COPD

    DEFF Research Database (Denmark)

    Iepsen, Ulrik Winning; Munch, Gregers Druedal Wibe; Rugbjerg, Mette

    2017-01-01

    -extensor exercise, and during arterial infusions of sodium nitroprusside (SNP) and acetylcholine (ACh), respectively. Ten patients with moderate to severe COPD and eight age- and sex matched healthy controls were studied. During knee-extensor exercise (10 W), leg blood flow was lower in the patients compared...... the formation of interstitial prostacyclin (vasodilator) was only increased in the controls. There was no difference between groups in the nitrite/nitrate levels (vasodilator) in plasma or interstitial fluid during exercise. Moreover, patients and controls showed similar vasodilatory capacity in response...

  20. Parametric analysis of air–water heat recovery concept applied to HVAC systems: Effect of mass flow rates

    Directory of Open Access Journals (Sweden)

    Mohamad Ramadan

    2015-09-01

    Full Text Available In the last three decades, the world has experienced enormous increases in energy and fuel consumption as a consequence of the economic and population growth. This causes renewable energy and energy recovery to become a requirement in building designs rather than option. The present work concerns a coupling between energy recovery and Heating, Ventilating and Air Conditioning HVAC domains and aims to apply heat recovery concepts to HVAC applications working on refrigeration cycles. It particularly uses the waste energy of the condenser hot air to heat/preheat domestic water. The heat exchanger considered in the recovery system is concentric tube heat exchanger. A thermal modeling of the complete system as well as a corresponding iterative code are developed and presented. Calculations with the code are performed and give pertinent magnitude orders of energy saving and management in HVAC applications. A parametric analysis based on several water and air flow rates is carried out. It was shown that water can be heated from 25 to 70 °C depending on the mass flow rates and cooling loads of the HVAC system. The most efficient configurations are obtained by lowering the air flow rate of the condenser fan.

  1. Effect of ion mass on transition to drift-zonal flow turbulence in the Controlled Shear Decorrelation eXperiment

    Science.gov (United States)

    Hong, Rongjie; Thakur, Saikat; Tynan, George

    2015-11-01

    The Controlled Shear De-correlation eXperiment (CSDX) is a helicon plasma device dedicated to studies of drift wave turbulence, zonal flow interaction and generation of intrinsic rotation in a cylindrical plasma configuration. Previous studies in argon plasma demonstrated existence of a weak turbulence driven azimuthally symmetric, radially sheared plasma flow. More recent studies at higher B field with larger plasma size have shown the coexistence of radially separated multiple instabilities during the transition to strongly developed plasma turbulence. To better understand the underlying mechanism and the role of the drift wave turbulence in the formation of the zonal shear layer and of the spatially separated multiple instabilities, we study the effects of the ion mass to further vary the effective system size via the parameter (Ln /ρs). Using an upgraded RF power source, we have achieved high-density helicon plasmas in gases such as argon, neon, helium, deut erium and hydrogen in CSDX. Therefore, the impact of the ρs and isotope effect on turbulent transport, including the energy transfers and self-organization mechanisms between turbulence and sheared flows, will be addressed. CMTFO - # DE-SC0008378, MIT - #DE-SC0010593.

  2. Smolt Passage Behavior and Flow-Net Relationship in the Forebay of John Day Dam, 1984-1985 Final Report of Research.

    Energy Technology Data Exchange (ETDEWEB)

    Giorgi, Albert E.

    1985-12-01

    The migration routes of downstream migrant salmonids in the forebay of John Day Dam were defined and assessed in relation to current velocities and water turbidity and temperature. Forebay current patterns were obtained from current meters at fixed sampling stations, the distribution of outmigrants was determined from purse seine sampling, and migration routes of yearling chinook salmon and steelhead were identified by radio telemetry techniques. All species of emigrating salmonids alter their distribution across the forebay as they approach the dam. Fish abundance was positively correlated with water clarity. There was no evidence to suggest that the migration routes were in response to current patterns in the forebay. Radio telemetry studies demonstrated that a certain segment of yearling chinook salmon approaching the dam are predisposed to spill passage (Washington side of the river) by virtue of their lateral position across the forebay. A new application of radio tag methodology was assessed and found to be useful in evaluating the effectiveness of spill for bypassing outmigrant salmon. A program system and cartographic model was developed which displays for any specified hour forebay current patterns at prevailing river flows and dam operations. The system can be used at other dam sites where investigations may wish to detail forebay current patterns.

  3. Net transport of suspended matter due to tidal straining

    Science.gov (United States)

    Jones, S. E.; Jago, C. F.; Simpson, J. H.; Rippeth, T. P.

    2003-04-01

    Net transport of suspended particulate matter (SPM) is well-known in tidal regions where there is time-velocity asymmetry due to frictional modification of the tide in shallow water. We present here observations which show a new mechanism for net flux of SPM in response to tidal straining in a region of freshwater influence (ROFI). In situ measurements of the particle size of suspended particulate matter (SPM) and turbulent energy dissipation have been made at a site in Liverpool Bay (Irish Sea) where there is significant resuspension of particles from the muddy sand substrate during spring tides. This is a ROFI where tidal straining dominates the temporal development of turbulence. On a spring tide the water column tries to stratify on the ebb and destratify on the flood, but these tendencies are masked by mixing due to tidal stirring. Nevertheless, there is a marked excess of TKE dissipation rate E on the flood, especially in the upper part of the water column. Resuspension occurs on both flood and ebb, but SPM flux is strongly asymmetric with a net shorewards component. Asymmetry is most pronounced for the larger particles which comprise most of the mass. Enhanced ? on the flood mixes large particles upwards into faster flowing water, which increases the flux. Comparable upwards mixing of large particles does not occur on the ebb where enhanced E is confined to slower bottom waters. The net flux is not seen on neap tides because, although there is more stratification due to tidal straining, there is essentially no resuspension. The net flux on springs is undoubtedly an important component of SPM transport (and any comparable particulates) in coastal regions.

  4. The characterisation of shellac resin by flow injection and liquid chromatography coupled with electrospray ionisation and mass spectrometry.

    Science.gov (United States)

    Tamburini, Diego; Dyer, Joanne; Bonaduce, Ilaria

    2017-11-01

    A strategy based on electrospray ionisation (ESI) in negative mode coupled with quadrupole-time of flight (Q-ToF) detection techniques was adopted to characterise some samples of shellac resin. Flow injection analysis (FIA) was used to investigate the distribution of the components of the resin. Eight groups of compounds with increasing masses were detected and assigned to free acids, esters and polyesters with up to eight units. High pressure liquid chromatography (HPLC) enabled the compounds to be chromatographically separated. Accurate molecular masses and tandem mass (MS/MS) spectra interpretation were used to characterise the different compounds, assigning and/or suggesting molecular structures. In some cases, highly detailed information about the ester linkages was provided by the MS/MS spectra, enabling the different isomers to be distinguished. Oxidation products were also identified in the samples and differences were observed in terms of hydrolysis and oxidation. In addition to providing the first characterisation of shellac by HPLC-ESI-Q-ToF and an atlas of MS/MS spectra of shellac components, this work demonstrates the suitability of the proposed strategy for characterising the resin, and provides the identification of previously unknown degradation products and minor components. This represents a significant step forward in the chemical knowledge of this material.

  5. Effects of partial slip boundary condition and radiation on the heat and mass transfer of MHD-nanofluid flow

    Science.gov (United States)

    Abd Elazem, Nader Y.; Ebaid, Abdelhalim

    2017-12-01

    In this paper, the effect of partial slip boundary condition on the heat and mass transfer of the Cu-water and Ag-water nanofluids over a stretching sheet in the presence of magnetic field and radiation. Such partial slip boundary condition has attracted much attention due to its wide applications in industry and chemical engineering. The flow is basically governing by a system of partial differential equations which are reduced to a system of ordinary differential equations. This system has been exactly solved, where exact analytical expression has been obtained for the fluid velocity in terms of exponential function, while the temperature distribution, and the nanoparticles concentration are expressed in terms of the generalized incomplete gamma function. In addition, explicit formulae are also derived from the rates of heat transfer and mass transfer. The effects of the permanent parameters on the skin friction, heat transfer coefficient, rate of mass transfer, velocity, the temperature profile, and concentration profile have been discussed through tables and graphs.

  6. Effects of partial slip boundary condition and radiation on the heat and mass transfer of MHD-nanofluid flow

    Science.gov (United States)

    Abd Elazem, Nader Y.; Ebaid, Abdelhalim

    2017-07-01

    In this paper, the effect of partial slip boundary condition on the heat and mass transfer of the Cu-water and Ag-water nanofluids over a stretching sheet in the presence of magnetic field and radiation. Such partial slip boundary condition has attracted much attention due to its wide applications in industry and chemical engineering. The flow is basically governing by a system of partial differential equations which are reduced to a system of ordinary differential equations. This system has been exactly solved, where exact analytical expression has been obtained for the fluid velocity in terms of exponential function, while the temperature distribution, and the nanoparticles concentration are expressed in terms of the generalized incomplete gamma function. In addition, explicit formulae are also derived from the rates of heat transfer and mass transfer. The effects of the permanent parameters on the skin friction, heat transfer coefficient, rate of mass transfer, velocity, the temperature profile, and concentration profile have been discussed through tables and graphs.

  7. Interference of chlorofluorocarbon (CFC)-containing inhalers with measurements of volatile compounds using selected ion flow tube mass spectrometry.

    Science.gov (United States)

    Epton, Michael J; Ledingham, Katherine; Dummer, Jack; Hu, Wan-Ping; Rhodes, Bronwen; Senthilmohan, Senti T; Scotter, Jennifer M; Allardyce, Randall; Cook, Julie; Swanney, Maureen P

    2009-02-01

    Selected ion flow tube mass spectrometry (SIFT-MS) is a sensitive technique capable of measuring volatile compounds (VCs) in complex gas mixtures in real time; it is now being applied to breath analysis. We investigated the effect of inhalers containing chlorofluorocarbons (CFCs) on the detection and measurement of haloamines in human breath. SIFT-MS mass scans (MS) and selected ion monitoring (SIM) scans were performed on three healthy non-smoking volunteers before and after inhalation of the following medications: Combiventtrade mark metered-dose inhaler (MDI) (CFC-containing); Ventolintrade mark MDI (CFC-free); Atroventtrade mark MDI (CFC-free), Beclazonetrade mark MDI (CFC-containing); Duolintrade mark nebuliser. In addition, the duration of the persistence of the mass/charge ratios was measured for 20 h. Inhalers containing CFCs generated large peaks at m/z 85, 87, 101, 103 and 105 in vitro and in vivo, consistent with the predicted product ions of CFCs 12, 114 and 11. No such peaks were seen with Duolintrade mark via nebuliser, or CFC-free MDIs. We conclude that measurement of VCs, such as haloamines, with product ions of similar m/z values to the ions found for CFCs would be significantly affected by the presence of CFCs in inhalers. This issue needs to be accounted for prior to the measurement of VCs in breath in people using inhalers containing CFCs. Copyright 2009 John Wiley & Sons, Ltd.

  8. WaveNet

    Science.gov (United States)

    2015-10-30

    Coastal Inlets Research Program WaveNet WaveNet is a web-based, Graphical-User-Interface ( GUI ) data management tool developed for Corps coastal...generates tabular and graphical information for project planning and design documents. The WaveNet is a web-based GUI designed to provide users with a...data from different sources, and employs a combination of Fortran, Python and Matlab codes to process and analyze data for USACE applications

  9. Coloured Petri Nets

    DEFF Research Database (Denmark)

    Jensen, Kurt

    1991-01-01

    This paper describes how Coloured Petri Nets (CP-nets) have been developed — from being a promising theoretical model to being a full-fledged language for the design, specification, simulation, validation and implementation of large software systems (and other systems in which human beings and...... use of CP-nets — because it means that the function representation and the translations (which are a bit mathematically complex) no longer are parts of the basic definition of CP-nets. Instead they are parts of the invariant method (which anyway demands considerable mathematical skills...

  10. Game Coloured Petri Nets

    DEFF Research Database (Denmark)

    Westergaard, Michael

    2006-01-01

    This paper introduces the notion of game coloured Petri nets. This allows the modeler to explicitly model what parts of the model comprise the modeled system and what parts are the environment of the modeled system. We give the formal definition of game coloured Petri nets, a means of reachability...... analysis of this net class, and an application of game coloured Petri nets to automatically generate easy-to-understand visualizations of the model by exploiting the knowledge that some parts of the model are not interesting from a visualization perspective (i.e. they are part of the environment...

  11. Programming NET Web Services

    CERN Document Server

    Ferrara, Alex

    2007-01-01

    Web services are poised to become a key technology for a wide range of Internet-enabled applications, spanning everything from straight B2B systems to mobile devices and proprietary in-house software. While there are several tools and platforms that can be used for building web services, developers are finding a powerful tool in Microsoft's .NET Framework and Visual Studio .NET. Designed from scratch to support the development of web services, the .NET Framework simplifies the process--programmers find that tasks that took an hour using the SOAP Toolkit take just minutes. Programming .NET

  12. Annotating Coloured Petri Nets

    DEFF Research Database (Denmark)

    Lindstrøm, Bo; Wells, Lisa Marie

    2002-01-01

    -net. An example of such auxiliary information is a counter which is associated with a token to be able to do performance analysis. Modifying colour sets and arc inscriptions in a CP-net to support a specific use may lead to creation of several slightly different CP-nets – only to support the different uses...... a method which makes it possible to associate auxiliary information, called annotations, with tokens without modifying the colour sets of the CP-net. Annotations are pieces of information that are not essential for determining the behaviour of the system being modelled, but are rather added to support...

  13. Experimental study of mass transfer phenomena in a cross flow membrane bioreactor: aeration and membrane separation

    Energy Technology Data Exchange (ETDEWEB)

    Marrot, B.; Barrios-Martinez, A.; Moulin, P.; Roche, N. [Universite Paul Cezanne - Aix Marseille III, Laboratoire de Procedes Propres and Environnement (LMSNM-GP - UMR 6181 CNRS), Europole de l' Arbois - BP 80-13545 Aix en Provence Cedex 4 (France)

    2005-10-01

    Experimental work carried out on wastewater from a wastewater treatment plant (WWTP) showed that in a cross flow membrane bioreactor the gas/liquid transfer is highly dependent on the biomass concentration. In new biological wastewater membrane treatment processes (mostly using deep end membranes), the biomass concentration is usually about 15 g/L, which entails a decrease in the bioreactor aeration capacity by a factor of approximately four compared with clean water. The gas/liquid transfer may therefore become a limiting step in this type of process. To prevent the operating costs of the biological treatment from increasing, it is imperative that the oxygen transfer be optimized. Membrane experiments showed that the permeate flux is highly dependent on the biomass concentration and the tangential velocity in the membrane module. (Abstract Copyright [2005], Wiley Periodicals, Inc.)

  14. Heat and mass transfer rates during flow of dissociated hydrogen gas over graphite surface

    Science.gov (United States)

    Nema, V. K.; Sharma, O. P.

    1986-01-01

    To improve upon the performance of chemical rockets, the nuclear reactor has been applied to a rocket propulsion system using hydrogen gas as working fluid and a graphite-composite forming a part of the structure. Under the boundary layer approximation, theoretical predictions of skin friction coefficient, surface heat transfer rate and surface regression rate have been made for laminar/turbulent dissociated hydrogen gas flowing over a flat graphite surface. The external stream is assumed to be frozen. The analysis is restricted to Mach numbers low enough to deal with the situation of only surface-reaction between hydrogen and graphite. Empirical correlations of displacement thickness, local skin friction coefficient, local Nusselt number and local non-dimensional heat transfer rate have been obtained. The magnitude of the surface regression rate is found low enough to ensure the use of graphite as a linear or a component of the system over an extended period without loss of performance.

  15. Method for 236U Determination in Seawater Using Flow Injection Extraction Chromatography and Accelerator Mass Spectrometry

    DEFF Research Database (Denmark)

    Qiao, Jixin; Hou, Xiaolin; Steier, Peter

    2015-01-01

    experimental parameters affecting the analytical effectiveness were investigated and optimized in order to achieve high chemical yields and simple and rapid analysis as well as low procedure background. Besides, the operational conditions for the target preparation prior to the AMS measurement were optimized......, on the basis of studying the coprecipitation behavior of uranium with iron hydroxide. The analytical results indicate that the developed method is simple and robust, providing satisfactory chemical yields (80−100%) and high analysis speed (4 h/sample), which could be an appealing alternative to conventional......An automated analytical method implemented in a flow injection (FI) system was developed for rapid determination of 236U in 10 L seawater samples. 238U was used as a chemical yield tracer for the whole procedure, in which extraction chromatography (UTEVA) was exploited to purify uranium, after...

  16. Design & Development of a High Mass Flow Piston Synthetic Jet Actuator

    Directory of Open Access Journals (Sweden)

    Ashraf Hamad Muhammad

    2015-01-01

    Full Text Available The idea of having a device that is capable of working in a systematic process allowing control of the boundary layer by means of operated on high-frequency, small-scale, and low energy actuators has caught the interest of the aerodynamicist community. With an eye on the available data and potential flow control advantages, our research team set out to manufacture a compact SJA (Synthetic Jet Actuator of its own, which would be capable of being installed inside an airfoil. It consists of components such as a single piston cylinder, with variable exit geometry along with the control system that has an electrical actuator which can be regulated in order for it to be capable of producing various operating frequencies. This paper consists of a study into the design of a single piston device SJA and will present all significant data both theoretical and computational regarding its design and performance.

  17. Capillary electrophoresis-mass spectrometry using a flow-through microvial interface for cationic metabolome analysis.

    Science.gov (United States)

    Lindenburg, Petrus W; Ramautar, Rawi; Jayo, Roxana G; Chen, David D Y; Hankemeier, Thomas

    2014-05-01

    The application of CE-MS in the field of metabolomics is underrepresented, even though it is in principle highly suited for the analysis of small charged compounds, as many metabolites are. Moreover, a robust coupling, using the sheath liquid (SL)-assisted interface was already presented more than a decade ago. A lack of concentration sensitivity is often mentioned as a reason for the underrepresentation of CE-MS in metabolomics. This is caused by postcolumn dilution of the sample with SL, which is typically delivered at a flow rate of 1-10 μL/min. In this study, we investigated the performance of the flow-through microvial (MV) assisted CE-MS interface for cationic metabolomics. With this interface, only a little liquid is added postcolumn, that is, typically 100-500 nL/min. For the evaluation, we used a metabolite mix comprising 45 important cationic metabolites and compared the sensitivity and LOD of both devices. The performance of the CE-MS system was significantly improved by using the MV-assisted interface; the sensitivity was increased more than three times and the LOD decreased more than five times. Then, we analyzed single zebrafish embryos to demonstrate the method on a volume-limited biological sample. In comparison with SL-assisted CE-MS, twice as many molecular features were found, of which several could be identified. These results demonstrate the good potential of the MV interface for enhancing the coverage of the metabolome. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Combining Flow and Mass Cytometry in the Search for Biomarkers in Chronic Graft-versus-Host Disease.

    Science.gov (United States)

    Stikvoort, Arwen; Chen, Yang; Rådestad, Emelie; Törlén, Johan; Lakshmikanth, Tadepally; Björklund, Andreas; Mikes, Jaromir; Achour, Adnane; Gertow, Jens; Sundberg, Berit; Remberger, Mats; Sundin, Mikael; Mattsson, Jonas; Brodin, Petter; Uhlin, Michael

    2017-01-01

    Chronic graft-versus-host disease (cGVHD) is a debilitating complication arising in around half of all patients treated with an allogeneic hematopoietic stem cell transplantation. Even though treatment of severe cGVHD has improved during recent years, it remains one of the main causes of morbidity and mortality in affected patients. Biomarkers in blood that could aid in the diagnosis and classification of cGVHD severity are needed for the development of novel treatment strategies that can alleviate symptoms and reduce the need for painful and sometimes complicated tissue biopsies. Methods that comprehensively profile complex biological systems such as the immune system can reveal unanticipated markers when used with the appropriate methods of data analysis. Here, we used mass cytometry, flow cytometry, enzyme-linked immunosorbent assay, and multiplex assays to systematically profile immune cell populations in 68 patients with varying grades of cGVHD. We identified multiple subpopulations across T, B, and NK-cell lineages that distinguished patients with cGVHD from those without cGVHD and which were associated in varying ways with severity of cGVHD. Specifically, initial flow cytometry demonstrated that patients with more severe cGVHD had lower mucosal-associated T cell frequencies, with a concomitant higher level of CD38 expression on T cells. Mass cytometry could identify unique subpopulations specific for cGVHD severity albeit with some seemingly conflicting results. For instance, patients with severe cGVHD had an increased frequency of activated B cells compared to patients with moderate cGVHD while activated B cells were found at a reduced frequency in patients with mild cGVHD compared to patients without cGVHD. Moreover, results indicate it may be possible to validate mass cytometry results with clinically viable, smaller flow cytometry panels. Finally, no differences in levels of blood soluble markers could be identified, with the exception for the semi

  19. Combining Flow and Mass Cytometry in the Search for Biomarkers in Chronic Graft-versus-Host Disease

    Directory of Open Access Journals (Sweden)

    Arwen Stikvoort

    2017-06-01

    Full Text Available Chronic graft-versus-host disease (cGVHD is a debilitating complication arising in around half of all patients treated with an allogeneic hematopoietic stem cell transplantation. Even though treatment of severe cGVHD has improved during recent years, it remains one of the main causes of morbidity and mortality in affected patients. Biomarkers in blood that could aid in the diagnosis and classification of cGVHD severity are needed for the development of novel treatment strategies that can alleviate symptoms and reduce the need for painful and sometimes complicated tissue biopsies. Methods that comprehensively profile complex biological systems such as the immune system can reveal unanticipated markers when used with the appropriate methods of data analysis. Here, we used mass cytometry, flow cytometry, enzyme-linked immunosorbent assay, and multiplex assays to systematically profile immune cell populations in 68 patients with varying grades of cGVHD. We identified multiple subpopulations across T, B, and NK-cell lineages that distinguished patients with cGVHD from those without cGVHD and which were associated in varying ways with severity of cGVHD. Specifically, initial flow cytometry demonstrated that patients with more severe cGVHD had lower mucosal-associated T cell frequencies, with a concomitant higher level of CD38 expression on T cells. Mass cytometry could identify unique subpopulations specific for cGVHD severity albeit with some seemingly conflicting results. For instance, patients with severe cGVHD had an increased frequency of activated B cells compared to patients with moderate cGVHD while activated B cells were found at a reduced frequency in patients with mild cGVHD compared to patients without cGVHD. Moreover, results indicate it may be possible to validate mass cytometry results with clinically viable, smaller flow cytometry panels. Finally, no differences in levels of blood soluble markers could be identified, with the exception

  20. Conductometric Sensor for Soot Mass Flow Detection in Exhausts of Internal Combustion Engines.

    Science.gov (United States)

    Feulner, Markus; Hagen, Gunter; Müller, Andreas; Schott, Andreas; Zöllner, Christian; Brüggemann, Dieter; Moos, Ralf

    2015-11-13

    Soot sensors are required for on-board diagnostics (OBD) of automotive diesel particulate filters (DPF) to detect filter failures. Widely used for this purpose are conductometric sensors, measuring an electrical current or resistance between two electrodes. Soot particles deposit on the electrodes, which leads to an increase in current or decrease in resistance. If installed upstream of a DPF, the "engine-out" soot emissions can also be determined directly by soot sensors. Sensors were characterized in diesel engine real exhausts under varying operation conditions and with two different kinds of diesel fuel. The sensor signal was correlated to the actual soot mass and particle number, measured with an SMPS. Sensor data and soot analytics (SMPS) agreed very well, an impressing linear correlation in a double logarithmic representation was found. This behavior was even independent of the used engine settings or of the biodiesel content.

  1. DIAGNOSING MASS FLOWS AROUND HERBIG Ae/Be STARS USING THE HE I λ10830 LINE

    Energy Technology Data Exchange (ETDEWEB)

    Cauley, P. Wilson [Department of Astronomy, Wesleyan University, 45 Wyllys Avenue, Middletown, CT 06459 (United States); Johns-Krull, Christopher M., E-mail: pcauley@wesleyan.edu, E-mail: cmj@rice.edu [Department of Physics and Astronomy, Rice University, 6100 Main Street, MS 108, Houston, TX 77005 (United States)

    2014-12-20

    We examine He I λ10830 profile morphologies for a sample of 56 Herbig Ae/Be stars (HAEBES). We find significant differences between HAEBES and classical T-Tauri stars (CTTS) in the statistics of both blueshifted absorption (i.e., mass outflows) and redshifted absorption features (i.e., mass infall or accretion). Our results suggest that, in general, Herbig Be (HBe) stars do not accrete material from their inner disks in the same manner as CTTS, which are believed to accrete material via magnetospheric accretion, whereas Herbig Ae (HAe) stars generally show evidence for magnetospheric accretion. We find no evidence in our sample of narrow blueshifted absorption features, which are typical indicators of inner disk winds and are common in He I λ10830 profiles of CTTS. The lack of inner-disk-wind signatures in HAEBES, combined with the paucity of detected magnetic fields on these objects, suggests that accretion through large magnetospheres that truncate the disk several stellar radii above the surface is not as common for HAe and late-type HBe stars as it is for CTTS. Instead, evidence is found for smaller magnetospheres in the maximum redshifted absorption velocities in our HAEBE sample. These velocities are, on average, a smaller fraction of the system escape velocity than is found for CTTS, suggesting accretion is taking place closer to the star. Smaller magnetospheres, and evidence for boundary layer accretion in HBe stars, may explain the less common occurrence of redshifted absorption in HAEBES. Evidence is found that smaller magnetospheres may be less efficient at driving outflows compared to CTTS magnetospheres.

  2. Determination of gas & liquid two-phase flow regime transitions in wellbore annulus by virtual mass force coefficient when gas cut

    Science.gov (United States)

    Qu, Junbo; Yan, Tie; Sun, Xiaofeng; Chen, Ye; Pan, Yi

    2017-10-01

    With the development of drilling technology to deeper stratum, overflowing especially gas cut occurs frequently, and then flow regime in wellbore annulus is from the original drilling fluid single-phase flow into gas & liquid two-phase flow. By using averaged two-fluid model equations and the basic principle of fluid mechanics to establish the continuity equations and momentum conservation equations of gas phase & liquid phase respectively. Relationship between pressure and density of gas & liquid was introduced to obtain hyperbolic equation, and get the expression of the dimensionless eigenvalue of the equation by using the characteristic line method, and analyze wellbore flow regime to get the critical gas content under different virtual mass force coefficients. Results show that the range of equation eigenvalues is getting smaller and smaller with the increase of gas content. When gas content reaches the critical point, the dimensionless eigenvalue of equation has no real solution, and the wellbore flow regime changed from bubble flow to bomb flow. When virtual mass force coefficients are 0.50, 0.60, 0.70 and 0.80 respectively, the critical gas contents are 0.32, 0.34, 0.37 and 0.39 respectively. The higher the coefficient of virtual mass force, the higher gas content in wellbore corresponding to the critical point of transition flow regime, which is in good agreement with previous experimental results. Therefore, it is possible to determine whether there is a real solution of the dimensionless eigenvalue of equation by virtual mass force coefficient and wellbore gas content, from which we can obtain the critical condition of wellbore flow regime transformation. It can provide theoretical support for the accurate judgment of the annular flow regime.

  3. Galaxy secular mass flow rate determination using the potential-density phase shift approach: Application to six nearby spiral galaxies

    Science.gov (United States)

    Zhang, Xiaolei; Buta, Ronald J.

    2015-01-01

    Using the potential-density phase shift approach developed by the present authors in earlier publications, we estimate the magnitude of radial mass accretion/excretion rates across the disks of six nearby spiral galaxies (NGC 628, NGC 3351, NGC 3627, NGC 4321, NGC 4736, and NGC 5194) having a range of Hubble types. Our goal is to examine these rates in the context of bulge building and secular morphological evolution along the Hubble sequence. Stellar surface density maps of the sample galaxies are derived from SINGS 3.6 μm and SDSS i-band images using colors as an indicator of mass-to-light ratios. Corresponding molecular and atomic gas surface densities are derived from published CO (1-0) and HI interferometric observations of the BIMA SONG, THINGS, and VIVA surveys. The mass flow rate calculations utilize a volume-type torque integral to calculate the angular momentum exchange rate between the basic state disk matter and what we assume to be density wave modes in the observed galaxies. This volume-type integral contains the contributions from both the gravitational surface torque couple and the advective surface torque couple at the nonlinear, quasi-steady state of the wave modes, in sharp contrast to its behavior in the linear regime, where it contains only the contribution from the gravitational surface torque couple used by Lynden-Bell & Kalnajs in 1972. The potential-density phase shift approach yields angular momentum transport rates several times higher than those estimated using the Lynden-Bell and Kalnajs approach. And unlike Lynden-Bell and Kalnajs, whose approach predicts zero mass redistribution across the majority of the disk surface (apart from the isolated locations of wave-particle resonances) for quasi-steady waves, the current approach leads to predictions of significant mass redistribution induced by the quasi-steady density wave modes, enough for the morphological types of disks to evolve substantially within its lifetime. This difference

  4. Comparison of the molecular mass and optical properties of colored dissolved organic material in two rivers and coastal waters by flow field-flow fractionation.

    Science.gov (United States)

    Zanardi-Lamardo, Eliete; Clark, Catherine D; Moore, Cynthia A; Zika, Rod G

    2002-07-01

    Colored dissolved organic material (CDOM) is an important sunlight absorbing substance affecting the optical properties of natural waters. However, little is known about its structural and optical properties mainly due to its complex matrix and the limitation of the techniques available. A comparison of two southwestern Florida rivers [the Caloosahatchee River (CR) and the Shark River (SR)] was done in terms of molecular mass (MM) and diffusion coefficients (D). The novel technique Frit inlet/frit outlet-flow field-flow fractionation (FIFO-FIFFF) with absorbance and fluorescence detectors was used to determine these properties. The SR receives organic material from the Everglades. By contrast, the CR arises from Lake Okeechobee in central Florida, receiving anthropogenic inputs, farming runoff, and natural organics. Both rivers discharge to the Gulf of Mexico. Fluorescence identified, for both rivers, two different MM distributions in low salinity water samples: the first was centered at approximately 1.7 kDa (CR) and approximately 2 kDa (SR); the second centered at approximately 13 kDa for both rivers, which disappeared gradually in the river plumes to below detection limit in coastal waters. Absorbance detected only one MM distribution centered at approximately 2 kDa (CR) and 2.2-2.4 kDa (SR). Fluorescence in general peaked at a lower MM than absorbance, suggesting a different size distribution for fluorophores vs chromophores. A photochemical study showed that, after sunlight, irradiated freshwater samples have similar characteristics to more marine waters, including a shift in MM distribution of chromophores. The differences observed between the rivers in the optical characteristics, MM distributions, and D values suggest that the CDOM sources, physical, and photochemical degradation processes are different for these two rivers.

  5. Profiling of oxidized phospholipids in lipoproteins from patients with coronary artery disease by hollow fiber flow field-flow fractionation and nanoflow liquid chromatography-tandem mass spectrometry.

    Science.gov (United States)

    Lee, Ju Yong; Byeon, Seul Kee; Moon, Myeong Hee

    2015-01-20

    Oxidized phospholipids (Ox-PLs) are oxidatively modified PLs that are produced during the oxidation of lipoproteins; oxidation of low density lipoproteins especially is known to be associated with the development of coronary artery disease (CAD). In this study, different lipoprotein classes (high density, low density, and very low density lipoproteins) from pooled plasma of CAD patients and pooled plasma from healthy controls were size-sorted on a semipreparative scale by multiplexed hollow fiber flow field-flow fractionation (MxHF5), and Ox-PLs that were extracted from each lipoprotein fraction were quantified by nanoflow liquid chromatography-tandem mass spectrometry (nLC-ESI-MS/MS). The present study showed that oxidation of lipoproteins occurred throughout all classes of lipoproteins with more Ox-PLs identified from CAD patient lipoproteins: molecular structures of 283 unique PL species (including 123 Ox-PLs) from controls and 315 (including 169 Ox-PLs) from patients were identified by data-dependent collision-induced dissociation experiments. It was shown that oxidation of PLs occurred primarily with hydroxylation of PL; in particular, a saturated acyl chain such as 16:0, 18:0, or even 18:1 at the sn-1 location of the glycerol backbone along with sn-2 acyl chains with at least two double bonds were identified. The acyl chain combinations commonly found for hydroxylated Ox-PLs in the lipoproteins of CAD patients were 16:0/18:2, 16:0/20:4, 18:0/18:2, and 18:0/20:4.

  6. Prospects and difficulties in TiO₂ nanoparticles analysis in cosmetic and food products using asymmetrical flow field-flow fractionation hyphenated to inductively coupled plasma mass spectrometry.

    Science.gov (United States)

    López-Heras, Isabel; Madrid, Yolanda; Cámara, Carmen

    2014-06-01

    In this work, we proposed an analytical approach based on asymmetrical flow field-flow fractionation combined to an inductively coupled plasma mass spectrometry (AsFlFFF-ICP-MS) for rutile titanium dioxide nanoparticles (TiO2NPs) characterization and quantification in cosmetic and food products. AsFlFFF-ICP-MS separation of TiO2NPs was performed using 0.2% (w/v) SDS, 6% (v/v) methanol at pH 8.7 as the carrier solution. Two problems were addressed during TiO2NPs analysis by AsFlFFF-ICP-MS: size distribution determination and element quantification of the NPs. Two approaches were used for size determination: size calibration using polystyrene latex standards of known sizes and transmission electron microscopy (TEM). A method based on focused sonication for preparing NPs dispersions followed by an on-line external calibration strategy based on AsFlFFF-ICP-MS, using rutile TiO2NPs as standards is presented here for the first time. The developed method suppressed non-specific interactions between NPs and membrane, and overcame possible erroneous results obtained when quantification is performed by using ionic Ti solutions. The applicability of the quantification method was tested on cosmetic products (moisturizing cream). Regarding validation, at the 95% confidence level, no significant differences were detected between titanium concentrations in the moisturizing cream prior sample mineralization (3865±139 mg Ti/kg sample), by FIA-ICP-MS analysis prior NPs extraction (3770±24 mg Ti/kg sample), and after using the optimized on-line calibration approach (3699±145 mg Ti/kg sample). Besides the high Ti content found in the studied food products (sugar glass and coffee cream), TiO2NPs were not detected. Copyright © 2014 Elsevier B.V. All rights reserved.

  7. Asymmetric flow field-flow fractionation coupled to inductively coupled plasma mass spectrometry for the quantification of quantum dots bioconjugation efficiency.

    Science.gov (United States)

    Menéndez-Miranda, Mario; Encinar, Jorge Ruiz; Costa-Fernández, José M; Sanz-Medel, Alfredo

    2015-11-27

    Hyphenation of asymmetric flow field-flow fractionation (AF4) to an on-line elemental detection (inductively coupled plasma-mass spectrometry, ICP-MS) is proposed as a powerful diagnostic tool for quantum dots bioconjugation studies. In particular, conjugation effectiveness between a "model" monoclonal IgG antibody (Ab) and CdSe/ZnS core-shell Quantum Dots (QDs), surface-coated with an amphiphilic polymer, has been monitored here by such hybrid AF4-ICP-MS technique. Experimental conditions have been optimized searching for a proper separation between the sought bioconjugates from the eventual free reagents excesses employed during the bioconjugation (QDs and antibodies). Composition and pH of the carrier have been found to be critical parameters to ensure an efficient separation while ensuring high species recovery from the AF4 channel. An ICP-MS equipped with a triple quadropole was selected as elemental detector to enable sensitive and reliable simultaneous quantification of the elemental constituents, including sulfur, of the nanoparticulated species and the antibody. The hyphenated technique used provided nanoparticle size-based separation, elemental detection, and composition analysis capabilities that turned out to be instrumental in order to investigate in depth the Ab-QDs bioconjugation process. Moreover, the analytical strategy here proposed allowed us not only to clearly identify the bioconjugation reaction products but also to quantify nanoparticle:antibodies bioconjugation efficiency. This is a key issue in future development of analytical and bioanalytical photoluminescent QDs applications. Copyright © 2015 Elsevier B.V. All rights reserved.

  8. Detection and characterization of silver nanoparticles in aqueous matrices using asymmetric-flow field flow fractionation with inductively coupled plasma mass spectrometry.

    Science.gov (United States)

    Hoque, Md Ehsanul; Khosravi, Kambiz; Newman, Karla; Metcalfe, Chris D

    2012-04-13

    Engineered nanomaterials (EN) may be released into the environment as a result of their use in various consumer products. Silver nanoparticles (nAg) are widely used as an antimicrobial agent in personal care and household products, and in textiles. Since there is high potential for nAg to be released into municipal wastewater and then discharged into the aquatic environment, there is a need to develop methods for the analysis of these materials in aqueous matrices. Asymmetric-flow field flow fractionation (AF4) with on-line detection by ultra violet-visible (UV-Vis) spectroscopy or inductively coupled plasma mass spectrometry (ICP-MS) was used to detect and characterize nAg in aqueous matrices. Analysis of a mixture of 20, 40 and 60 nm nAg standards suspended in water resulted in a well resolved fractogram. Retention times of nAg separated by AF4 were correlated with the particle sizes of the standards. The limit of detection (LOD) for analysis of nAg using the on-line AF4/ICP-MS method was 0.80 ng mL(-1). Two calibration approaches (i.e., external calibration and standard addition) were used to quantify nAg concentrations, and both methods gave similar results. Using the on-line AF4/ICP-MS analytical method, nano-sized Ag was detected and quantified in untreated wastewater (i.e., influent) collected from a wastewater treatment plant. The concentration and the modal size of nAg in the influent were 1.90 ng mL(-1) and 9.3 nm respectively. Copyright © 2012 Elsevier B.V. All rights reserved.

  9. Characterization and quantification of silver nanoparticles in nutraceuticals and beverages by asymmetric flow field flow fractionation coupled with inductively coupled plasma mass spectrometry.

    Science.gov (United States)

    Ramos, K; Ramos, L; Cámara, C; Gómez-Gómez, M M

    2014-12-05

    This study evaluated the feasibility of asymmetric flow field flow fractionation coupled with inductively coupled plasma mass spectrometry (AF4-ICP-MS) for separation, characterization and quantification of silver nanoparticles (AgNPs) in complex nutraceutical and beverage samples. For improved determination, different analysis conditions were proposed depending on the NP size, i.e. below 20 nm and in the 20-60 nm range. After optimization of the different experimental parameters affecting the AF4 separation process and the analyte detection, the proposed methods showed a wide dynamic linear range (i.e., in the 10-1000 μg L(-1)) and limits of detection below 28 ng L(-1). A previous probe ultrasonication for 90 s (corresponding to 45 pulses of 2 s) of the tested samples resulted in complete AgNPs disaggregation. As a result, a fast accurate determination was achieved (complete analysis was done in ca. 37 min). The practicality of the proposed methodology for the intended determination was demonstrated by successful determination of the AgNPs present in a variety of nutraceuticals and a beverage at concentration levels in the 0.7-29.5×10(3) μg L(-1) range. A good agreement was observed among these concentration data and those determined by more conventional sample preparation techniques, such as ultracentrifugation and acid digestion. Also, the estimated NP sizes using AF4 compared satisfactorily with those determined by image techniques, i.e. transmission electron microscopy (TEM). All together demonstrated the utility of this novel analytical methodology for the analysis of AgNPs of different size in complex matrices. Copyright © 2014 Elsevier B.V. All rights reserved.

  10. Evaluation of oscillatory integrals for analytical groundwater flow and mass transport models

    Science.gov (United States)

    Ledder, Glenn; Zlotnik, Vitaly A.

    2017-06-01

    Modeling of transient dynamics of an interface between fluids of identical density and viscosity, but different otherwise, is of great interest in aquifer hydraulic, and advective contaminant transport, and has broad application. Closed-form solutions are often available for problems with simple, practically important geometry, but the integrals that appear in such solutions often have integrands with two or more oscillatory factors. Such integrals pose difficulties for numerical evaluation because the positive and negative contributions of the integrand largely cancel and the integrands decay very slowly in the integration domain. Some problems with integrands with a single oscillatory factor were tackled in the past with an integration/summation/extrapolation (ISE) method: breaking the integrand at consecutive zeros to obtain an alternating series and then using the Shanks algorithm to accelerate convergence of the series. However, this technique is ineffective for problems with multiple oscillatory factors. We present a comprehensive strategy for evaluation of such integrals that includes a better ISE method, an interval truncation method, and long-time asymptotics; this strategy is applicable to a large class of integrals with either single or multiple oscillatory factors that arise in modeling of groundwater flow and transport. The effectiveness of this methodology is illustrated by examples of integrals used in well hydraulics, groundwater recharge design, and particle tracking.

  11. Heat and Mass Transfer on MHD Flow of a Viscoelastic Fluid through Porous Media over a Shrinking Sheet

    Science.gov (United States)

    Bhukta, D.; Dash, G. C.; Mishra, S. R.

    2014-01-01

    An attempt has been made to study the heat and mass transfer effect in a boundary layer flow through porous medium of an electrically conducting viscoelastic fluid over a shrinking sheet subject to transverse magnetic field in the presence of heat source. Effects of radiation, viscous dissipation, and uniform heat sink on the heat transfer have been considered. The method of solution involves similarity transformation. The coupled nonlinear partial differential equations representing momentum, concentration, and nonhomogenous heat equation are reduced into a set of nonlinear ordinary differential equations. The transformed equations are solved by applying Kummer's function. The exact solution of temperature field is obtained for power-law surface temperature (PST) as well as power-law heat flux (PHF) boundary condition. The interaction of magnetic field is proved to be counterproductive in enhancing velocity and concentration distribution, whereas presence of porous matrix reduces the temperature field at all points. PMID:27379316

  12. The impact of mass flow and masking on the pressure drop of air filter in heavy-duty diesel engine

    Directory of Open Access Journals (Sweden)

    Gorji-Bandpy Mofid

    2012-04-01

    Full Text Available This paper presents a computational fluid dynamics (CFD calculation approach to predict and evaluate the impact of the mass-flow inlet on the pressure drop of turbocharger`s air filtfer in heavy-duty diesel engine. The numerical computations were carried out using a commercial CFD program whereas the inlet area of the air filter consisted of several holes connected to a channel. After entering through the channel, the air passes among the holes and enters the air filter. The effect of masking holes and hydraulic diameter is studied and investigated on pressure drop. The results indicate that pressure drop increase with decreasing of hydraulic diameter and masking of the holes has considerable affect on the pressure drop.

  13. Heat and Mass Transfer on MHD Flow of a Viscoelastic Fluid through Porous Media over a Shrinking Sheet.

    Science.gov (United States)

    Bhukta, D; Dash, G C; Mishra, S R

    2014-01-01

    An attempt has been made to study the heat and mass transfer effect in a boundary layer flow through porous medium of an electrically conducting viscoelastic fluid over a shrinking sheet subject to transverse magnetic field in the presence of heat source. Effects of radiation, viscous dissipation, and uniform heat sink on the heat transfer have been considered. The method of solution involves similarity transformation. The coupled nonlinear partial differential equations representing momentum, concentration, and nonhomogenous heat equation are reduced into a set of nonlinear ordinary differential equations. The transformed equations are solved by applying Kummer's function. The exact solution of temperature field is obtained for power-law surface temperature (PST) as well as power-law heat flux (PHF) boundary condition. The interaction of magnetic field is proved to be counterproductive in enhancing velocity and concentration distribution, whereas presence of porous matrix reduces the temperature field at all points.

  14. Transient thermophoretic particle deposition on forced convective heat and mass transfer flow due to a rotating disk

    Directory of Open Access Journals (Sweden)

    M.S. Alam

    2016-03-01

    Full Text Available This paper investigates thermophoretic deposition of micron sized particles on unsteady forced convective heat and mass transfer flow due to a rotating disk. Using similarity transformations the governing nonlinear partial differential equations are transformed into a system of ordinary differential equations that are then solved numerically by applying Nachtsheim–Swigert shooting iteration technique along with sixth-order Runge–Kutta integration scheme. The effects of the pertinent parameters on the radial, tangential and axial velocities, temperature and concentration distributions, and axial thermophoretic velocity together with the local skin-friction coefficient, and local Nusselt number are displayed graphically. The inward axial thermophoretic deposition velocity (local Stanton number is also tabulated. The obtained results show that axial thermophoretic velocity is increased with the increasing values of the thermophoretic coefficient, thermophoresis parameter, rotational parameter as well as unsteadiness parameter. The results also show that inward axial thermophoretic particle deposition velocity decreases with the increase of the Lewis number.

  15. Radiation and mass transfer effects on unsteady MHD convective flow past an infinite vertical plate with Dufour and Soret effects

    Directory of Open Access Journals (Sweden)

    N. Vedavathi

    2015-03-01

    Full Text Available This paper deals with the effects of heat and mass transfer on two-dimensional unsteady MHD free convection flow past a vertical porous plate in a porous medium in the presence of thermal radiation under the influence of Dufour and Soret effects. The governing nonlinear partial differential equations have been reduced to the coupled nonlinear ordinary differential equations by the similarity transformations. The resulting equations are then solved numerically using shooting method along with Runge–Kutta fourth order integration scheme. The numerical results are displayed graphically showing the effects of various parameters entering into the problem. Finally, the local values of the skin-friction coefficient, Nusselt number and Sherwood number are also shown in tabular form.

  16. Upwind discontinuous Galerkin methods with mass conservation of both phases for incompressible two-phase flow in porous media

    KAUST Repository

    Kou, Jisheng

    2014-03-22

    Discontinuous Galerkin methods with interior penalties and upwind schemes are applied to the original formulation modeling incompressible two-phase flow in porous media with the capillary pressure. The pressure equation is obtained by summing the discretized conservation equations of two phases. This treatment is very different from the conventional approaches, and its great merit is that the mass conservations hold for both phases instead of only one phase in the conventional schemes. By constructing a new continuous map and using the fixed-point theorem, we prove the global existence of discrete solutions under the proper conditions, and furthermore, we obtain a priori hp error estimates of the pressures in L 2 (H 1) and the saturations in L ∞(L 2) and L 2 (H 1). © 2014 Wiley Periodicals, Inc.

  17. Net zero water

    CSIR Research Space (South Africa)

    Lindeque, M

    2013-01-01

    Full Text Available Is it possible to develop a building that uses a net zero amount of water? In recent years it has become evident that it is possible to have buildings that use a net zero amount of electricity. This is possible when the building is taken off...

  18. SolNet

    DEFF Research Database (Denmark)

    Jordan, Ulrike; Vajen, Klaus; Bales, Chris

    2014-01-01

    SolNet, founded in 2006, is the first coordinated International PhD education program on Solar Thermal Engineering. The SolNet network is coordinated by the Institute of Thermal Engineering at Kassel University, Germany. The network offers PhD courses on solar heating and cooling, conference...

  19. Kunstige neurale net

    DEFF Research Database (Denmark)

    Hørning, Annette

    1994-01-01

    Artiklen beskæftiger sig med muligheden for at anvende kunstige neurale net i forbindelse med datamatisk procession af naturligt sprog, specielt automatisk talegenkendelse.......Artiklen beskæftiger sig med muligheden for at anvende kunstige neurale net i forbindelse med datamatisk procession af naturligt sprog, specielt automatisk talegenkendelse....

  20. An Integrated Instrumentation System for Velocity, Concentration and Mass Flow Rate Measurement of Solid Particles Based on Electrostatic and Capacitance Sensors

    Directory of Open Access Journals (Sweden)

    Jian Li

    2015-12-01

    Full Text Available The online and continuous measurement of velocity, concentration and mass flow rate of pneumatically conveyed solid particles for the high-efficiency utilization of energy and raw materials has become increasingly significant. In this paper, an integrated instrumentation system for the velocity, concentration and mass flow rate measurement of dense phase pneumatically conveyed solid particles based on electrostatic and capacitance sensorsis developed. The electrostatic sensors are used for particle mean velocity measurement in combination with the cross-correlation technique, while the capacitance sensor with helical surface-plate electrodes, which has relatively homogeneous sensitivity distribution, is employed for the measurement of particle concentration and its capacitance is measured by an electrostatic-immune AC-based circuit. The solid mass flow rate can be further calculated from the measured velocity and concentration. The developed instrumentation system for velocity and concentration measurement is verified and calibrated on a pulley rig and through static experiments, respectively. Finally the system is evaluated with glass beads on a gravity-fed rig. The experimental results demonstrate that the system is capable of the accurate solid mass flow rate measurement, and the relative error is within −3%–8% for glass bead mass flow rates ranging from 0.13 kg/s to 0.9 kg/s.

  1. An automated turbulent flow liquid chromatography-isotope dilution mass spectrometry (LC-IDMS) method for quantitation of serum creatinine.

    Science.gov (United States)

    Harlan, Robert; Clarke, William; Di Bussolo, Joseph M; Kozak, Marta; Straseski, Joely; Meany, Danni Li

    2010-11-11

    When creatinine concentrations determined by routine clinical assays are in question, reference methods can aid investigation. Currently available reference methods are significantly labor-intensive, which prevents implementation in a routine clinical laboratory. Creatinine D-3 internal standard was added to serum prior to chromatographic separation. A TurboFlow Cyclone MCX column was used for online solid phase extraction (SPE) to remove large biomolecules such as proteins, carbohydrates and phospholipids from the serum specimen. Creatinine and creatinine D-3 were then eluted onto a Hypercarb (porous graphitic carbon) column for separation. Analytes were detected using electrospray ionization tandem mass spectrometry and measured by monitoring parent ions of m/z 114 and 117, respectively. Total precision at multiple levels was found to be less than 6% (1.0-7.5 mg/dl). Limit of detection (LOD) was 0.05 mg/dl and limit of quantitation (LOQ) was 0.20 mg/dl. Average recovery was 107.5% (0.37-5.95 mg/dl). Analysis of standard reference materials from The National Institute of Standards and Technology (NIST) confirmed accuracy of the method. No significant difference was found between the liquid chromatography-isotope dilution mass spectrometry (LC-IDMS) method and the Roche Creatinine Plus enzymatic assay. The automated turbulent flow LC-IDMS method for quantitation of serum creatinine is accurate, robust, and easy to perform and may serve as a quick and inexpensive alternative to current creatinine reference methods. 2010 Elsevier B.V. All rights reserved.

  2. Chemical reaction effects on unsteady MHD free convective flow in a rotating porous medium with mass transfer

    Directory of Open Access Journals (Sweden)

    Govindarajan Arunachalam

    2014-01-01

    Full Text Available An investigation of unsteady MHD free convective flow and mass transfer during the motion of a viscous incompressible fluid through a porous medium, bounded by an infinite vertical porous surface, in a rotating system is presented. The porous plane surface and the porous medium are assumed to rotate in a solid body rotation. The vertical surface is subjected to uniform constant suction perpendicular to it and the temperature at this surface fluctuates in time about a non-zero constant mean. Analytical expressions for the velocity, temperature and concentration fields are obtained using the perturbation technique. The effects of R (rotation parameter, k0 (permeability parameter, M (Hartmann number and w (frequency parameter on the flow characteristics are discussed. It is observed that the primary velocity component decreases with the increase in either of the rotation parameter R, the permeability parameter k0, or the Hartmann number M. It is also noted that the primary skin friction increases whenever there is an increase in the Grashof number Gr or the modified Grashof number Gm. It is clear that the heat transfer coefficient in terms of the Nusselt number decreases in the case of both air and water when there is an increase in the Hartmann number M. It is observed that the magnitude of the secondary velocity profiles increases whenever there is an increase in either of the Grashof number or the modified Grashof number for mass transfer or the permeability of the porous media. Concentration profiles decreases with an increase in the Schmidt number.

  3. The mass flow and proposed management of bisphenol A in selected Norwegian waste streams.

    Science.gov (United States)

    Arp, Hans Peter H; Morin, Nicolas A O; Hale, Sarah E; Okkenhaug, Gudny; Breivik, Knut; Sparrevik, Magnus

    2017-02-01

    Current initiatives for waste-handling in a circular economy favor prevention and recycling over incineration or landfilling. However, the impact of such a transition on environmental emissions of contaminants like bisphenol A (BPA) during waste-handling is not fully understood. To address this, a material flow analysis (MFA) was constructed for selected waste categories in Norway, for which the amount recycled is expected to increase in the future; glass, vehicle, electronic, plastic and combustible waste. Combined, 92tons/y of BPA are disposed of via these waste categories in Norway, with 98.5% associated with plastic and electronic waste. During the model year 2011, the MFA showed that BPA in these waste categories was destroyed through incineration (60%), exported for recycling into new products (35%), stored in landfills (4%) or released into the environment (1%). Landfilling led to the greatest environmental emissions (up to 13% of landfilled BPA), and incinerating the smallest (0.001% of incinerated BPA). From modelling different waste management scenarios, the most effective way to reduce BPA emissions are to incinerate BPA-containing waste and avoid landfilling it. A comparison of environmental and human BPA concentrations with CoZMoMAN exposure model estimations suggested that waste emissions are an insignificant regional source. Nevertheless, from monitoring studies, landfill emissions can be a substantial local source of BPA. Regarding the transition to a circular economy, it is clear that disposing of less BPA-containing waste and less landfilling would lead to lower environmental emissions, but several uncertainties remain regarding emissions of BPA during recycling, particularly for paper and plastics. Future research should focus on the fate of BPA, as well as BPA alternatives, in emerging reuse and recycling processes, as part of the transition to a circular economy. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Urban rivers as conveyors of hydrocarbons to sediments of estuarine areas: source characterization, flow rates and mass accumulation.

    Science.gov (United States)

    Mauad, Cristiane R; Wagener, Angela de L R; Massone, Carlos G; Aniceto, Mayara da S; Lazzari, Letícia; Carreira, Renato S; Farias, Cássia de O

    2015-02-15

    Aliphatic (n-C12-n-C40, unresolved complex mixture, resolved peaks) and aromatic hydrocarbons (46 PAH) were investigated in suspended particulate matter (SPM) sampled over eleven months in six of the major rivers and two channels of the Guanabara Bay Basin. PAH flow rates of the most contaminated rivers, the contribution to the PAH sediment load of the receiving bay, and the main sources of hydrocarbons were determined. PAH (38) ranged from 28 ng L(-1) to 11,514 ng L(-1). Hydrocarbon typology and statistical evaluation demonstrated contribution of distinct sources in different regions and allowed quantification of these contributions. Total flow rate for the five major rivers amounts to 3 t year(-1) and responds for 30% of the total PAH annual input into the northern area of the Guanabara Bay. For the first time PAH mass deposited in the bay sediments has been estimated and shall serve as base for decision making and source abatement. Copyright © 2014 Elsevier B.V. All rights reserved.

  5. Unsteady magnetohydrodynamic mixed convection flow with heat and mass transfer over a horizontal circular cylinder embedded in a porous medium

    Directory of Open Access Journals (Sweden)

    Boričić Branko Z.

    2016-01-01

    Full Text Available The objective of the present study is to investigate the effect of flow parameters on the mixed convection heat and mass transfer of an unsteady magnetohydrodynamic flow of an electrically conducting, viscous, and incompressible fluid over a horizontal circular cylinder embedded in porous medium, considering effects of chemical reaction and heat source/sink, by taking into account viscous dissipation. The present magnetic field is homogenous and perpendicular to the body surface. Magnetic Reynolds number is significantly lower than one i. e. considered the problem is in approximation without induction. The governing non-linear partial differential equations and associated boundary conditions are made dimensionless using a suitable similarity transformation and similarity parameters. System of non-dimensionless equations are solved numerically by implicit finite difference three-diagonal and iteration method. Numerical results obtained for different values of porous medium, magnetic, diffusion and temperature parameters, buoyancy diffusion parameter and thermal parameter and for different values Prandtl, Echart, and Schmidt numbers. Variation of velocity, temperature and concentration and many integral and differential characteristics boundary layer are discussed and shown graphically.

  6. Emission from accelerating jets in gamma-ray bursts: radiation-dominated flows with increasing mass outflow rates

    Science.gov (United States)

    Ryde, Felix; Lundman, Christoffer; Acuner, Zeynep

    2017-12-01

    We study the narrowest spectra expected from gamma-ray bursts. We present an analytical function for the spectrum that is emitted from the photosphere of a radiation-dominated flow that is under acceleration. This is the narrowest possible spectrum and it differs from a Planck function. We also present numerical spectra from photospheres occurring during the transition into the coasting phase of the flow. Using these spectral models, we reanalyse Fermi observations of GRB 100507 and GRB 101219, which both have been reported to have very narrow spectra. The bursts can be fitted by the spectral models: for GRB 101219 the spectrum is consistent with the photosphere occurring below or close to the saturation radius, while for GRB 100507 the photosphere position relative to the saturation radius can be determined as a function of time. In the latter case, we find that the photosphere initially occurs in the acceleration phase and thereafter transitions into the coasting phase. We also find that this transition occurs at the same time as the change in observed cooling behaviour: the temperature is close to constant before the break and decays after. We argue that such a transition can be explained by an increasing mass outflow rate. Both analysed bursts thus give strong evidence that the jets are (initially) radiation dominated.

  7. Dynamical regimes of a pH-oscillator operated in two mass-coupled flow-through reactors.

    Science.gov (United States)

    Pešek, Oldřich; Schreiberová, Lenka; Schreiber, Igor

    2011-05-28

    We present results of experiments focused on emergent and cooperative dynamics in a system of two coupled flow-through stirred reaction cells with diffusion-like mass exchange and a strongly nonlinear chemical reaction between hydrogen peroxide and thiosulphate catalysed by cupric ions in diluted solution of sulphuric acid. Due to complex mechanism, in which a crucial role is played by hydrogen and/or hydroxide ions, dynamics in a single cell entail multiple stationary states, excitability and oscillations conveniently indicated by measuring pH. When coupled, the system shows a plethora of dynamical regimes depending on the coupling strength and flow rate. Under certain conditions both cells display dynamics close to that in the absence of coupling, but majority of the regimes are emergent and cannot be deduced from dynamics of decoupled reactors. The most prominent is a stationary state maintaining highly acidic values of pH in one of the reactors and weakly acidic in the other. When each cell is set to display excitability and the coupled system is externally perturbed, the cells may cooperate and transmit excitations elicited by pulsed perturbations in one cell to the other. Periodic pulses induce firing patterns marked by a various degree of propagated excitations and by being periodic or irregular. This journal is © the Owner Societies 2011

  8. Design and experimental analysis of counter-flow heat and mass exchanger incorporating (M-cycle) for evaporative cooling

    Science.gov (United States)

    Khalid, Omar; Butt, Zubair; Tanveer, Waqas; Rao, Hasan Iqbal

    2017-04-01

    In this paper, the functioning of dew-point cooler is improved in terms of its thermal effectiveness. For this reason, a heat and mass exchanger has been designed by using a counter-flow pattern incorporating Maisotsenko cycle (M-cycle) having effective absorbing material called Kraft paper on wet channel side and improved width to height ratio. Experimentation has been performed under various inlet air working parameters such as humidity, velocity and temperature in addition with changing feed water temperature. The results from the experiments specify that the dew-point and the wet-bulb effectiveness is achieved between 67-87 % and 104-120 % respectively. Analysis is performed with temperature variation between 25 and 45 °C at different absolute humidity levels ranging from 14.4 to 18 g/kg, while the inlet air velocity is varied between 0.88 and 1.50 m/s. Thus, the working ability of the improved design has been found 5 % more effective in terms of wet bulb effectiveness as compared to previous counter-flow designs.

  9. A comparative study on heat and mass transfer of the Blasius and Falkner-Skan flow of a bio-convective Casson fluid past a wedge

    Science.gov (United States)

    Raju, C. S. K.; Sandeep, N.

    2016-11-01

    Nowadays, many theoretical models are available for analyzing the heat and mass transfer of flows through different geometries. Nevertheless, it is challenging for researchers to choose among these models, the most suitable for a particular geometry. In addition to this, the extrinsic magnetic field is capable to set the thermal and physical properties of magnetic fluids and regulate the flow and heat transfer characteristics. The strength of the applied magnetic field affects the thermal conductivity of the fluids and makes it anisotropic. With this incentive, we attempt to study the thermophoresis and Brownian motion effects on the magnetohydrodynamic radiative Casson fluid flow over a wedge filled with gyrotactic microorganisms by considering the Blasius and Falkner-Skan models. Numerical solutions are offered graphically as well as in tabular form with the aid of Runge-Kutta and Newton's methods. Results for Blasius and Falkner-Skan flow cases are exhibited through plots for the parameters of concern. For real life applications, we also calculated the heat and mass transfer rates. It is observed that thermal and concentration boundary layers are not uniform for Falkner-Skan and Blasius flow cases. It is also observed that the heat and mass transfer rate is high in Falkner-Skan flow when compared with Blasius flow.

  10. 'Operation recovery'--the Atlantic coastal netting project

    Science.gov (United States)

    Baird, J.; Robbins, C.S.; Bagg, A.M.; Dennis, J.V.

    1958-01-01

    In August and September, 1957, 22 netting stations were operated on and near the Atlantic coast from Nova Scotia to North Carolina. Two were manned for the entire two-month period, half of the others from 1 to 5 weeks, and the remainder for only a few days. Total bandings amounted to 11,613 individuals of 130 species, of which passerine birds made up 97 per cent of the total individuals. Nearly half the birds handled belonged to two families, Parulidae and Fringillidae. The 3 top species, Catbird, Song Sparrow, and Swainson's Thrush, comprised 30 percent of the total. A brief summary of location, habitat, and principal species banded is given for each station. At Middletown, R. I., 92 specimens of 3 species of Hippoboscidae were collected from netted birds. Eleven direct recoveries were reported in 1957, as compared with one each in the 2 preceding years. Two of the 11 were subsequently taken at another coastal netting station, and a third was trapped at a feeding station. The shortest interval of recovery was 5 days for a Northern Waterthrush that was banded at Plum Island, Mass., on September 2 and recaptured at Island Beach, N. J., on September 7, 1957. Observed direction of migration and of local movement at netting stations is discussed, as is distribution of recovery records. Three of the first four recovery records came from north or east of the netting station, quite contrary to the expected direction of fall migration. All cold-frontal passages during August and September are discussed, together with a brief review of their effects on migration at various coastal netting stations. The movement of a high pressure cell from the Great Lakes toward the Maritime Provinces results in a sustained northerly (southward) flow of polar air for two or more days after passage of a cold front; this produces several days of migratory activity, the second frequently being the best. If, however, the High drifts southeastward, stations to the north of its center soon

  11. Transient methods to characterize flows and mass transfer in a packed column by tracers; Methodes transitoires de caracterisation des ecoulements et du transfert de masse dans une colonne a garnissage a l'aide de traceurs

    Energy Technology Data Exchange (ETDEWEB)

    Perrin, S.

    1998-06-11

    The aim of this study is to propose a packed column characterization method in the form of phases flows and mass transfer model, in which the parameters are estimated by transient technique. After a bibliographic study a model is performed and validated. It allows efficiency and precision in the parameters choice. Two tracer techniques have been implemented: they show interesting possibilities of flow diagnosis. (A.L.B.)

  12. Conjugate transfer of heat and mass in unsteady flow of a micropolar fluid with wall couple stress

    Science.gov (United States)

    Khalid, Asma; Khan, Ilyas; Khan, Arshad; Shafie, Sharidan

    2015-12-01

    This is an attempt to investigate the unsteady flow of a micropolar fluid with free convection caused due to temperature and concentration differences. Micropolar fluid is taken over a vertical plate oscillating in its own plane. Wall couple stress is engaged at the bounding plate together with isothermal temperature and constant mass diffusion. Problem is modelled in terms of coupled partial differential equations together with some physical conditions and then written in non-dimensional form. Exact solutions are determined using the Laplace transform method. For convenience, they are expressed in simplified form using exponential functions and complementary error functions. Using computational software MATHCAD, analytical results of velocity, temperature, microrotation and concentration are plotted in graphs and discussed for various embedded parameters. Results of skin friction, wall couple stress, rate of heat transfer (Nusselt number) and rate of mass transfer (Sherwood number) are also evaluated. Present results of micropolar fluid are graphically compared with published results of Newtonian fluid. It is found that micropolar fluid velocity is smaller than Newtonian fluid.

  13. Perfluoroalkyl substances in the Daling River with concentrated fluorine industries in China: seasonal variation, mass flow, and risk assessment.

    Science.gov (United States)

    Zhu, Zhaoyun; Wang, Tieyu; Meng, Jing; Wang, Pei; Li, Qifeng; Lu, Yonglong

    2015-07-01

    In the present study, we investigated concentrations and composition profiles of perfluoroalkyl substances (PFASs) in surface water from the Daling River in different seasons. The highest concentration of ΣPFASs (9540 ng L(-1)) and dominant homologues were found in surface water collected in summer. Perfluorobutanoic acid (PFBA), perfluorobutane sulfonate (PFBS), and perfluorooctanoic acid (PFOA) were the dominant PFASs in four seasons with a total contribution of over 90%. The discharge of two fluorine chemical industry parks was predicted to be the main contamination source of PFASs in the study area. The daily and annual mass flows were calculated according to data of detected PFAS concentrations and water discharge, and the annual mass loading of PFASs into the Bohai Sea from the Daling River reached to 461 kg year(-1). Hazard assessment indicated that concentrations of PFASs in study area had little risk to aquatic organisms and wildlife. However, the multiple health risk would be relatively high if the water was served as drinking water in the study area.

  14. Conjugate transfer of heat and mass in unsteady flow of a micropolar fluid with wall couple stress

    Directory of Open Access Journals (Sweden)

    Asma Khalid

    2015-12-01

    Full Text Available This is an attempt to investigate the unsteady flow of a micropolar fluid with free convection caused due to temperature and concentration differences. Micropolar fluid is taken over a vertical plate oscillating in its own plane. Wall couple stress is engaged at the bounding plate together with isothermal temperature and constant mass diffusion. Problem is modelled in terms of coupled partial differential equations together with some physical conditions and then written in non-dimensional form. Exact solutions are determined using the Laplace transform method. For convenience, they are expressed in simplified form using exponential functions and complementary error functions. Using computational software MATHCAD, analytical results of velocity, temperature, microrotation and concentration are plotted in graphs and discussed for various embedded parameters. Results of skin friction, wall couple stress, rate of heat transfer (Nusselt number and rate of mass transfer (Sherwood number are also evaluated. Present results of micropolar fluid are graphically compared with published results of Newtonian fluid. It is found that micropolar fluid velocity is smaller than Newtonian fluid.

  15. Mechanical coupling between two innovative theories on erosion, transportation and phase-separation: Solving some long-standing problems in mass flows

    Science.gov (United States)

    Pudasaini, Shiva P.; Fischer, Jan-Thomas; Mergili, Martin

    2017-04-01

    Debris flows are gravity driven mixture flows of soil, sand, rock and water. The solid particles and viscous fluid governs the rheological properties, and their coupling significantly influences the dynamics. For example, debris flows can dramatically increase their volume and destructive potential, and become exceptionally mobile by entraining bed material. The mixture composition can evolve to strikingly change the spatial distribution of particles and fluid, and thus frictional and viscous resistance. So, erosion-deposition and phase-separation between solid and fluid, which strongly depend on material composition, play a critical role in debris flow dynamics. Proper understanding of these complex physical processes is very important in accurate description of impact forces, inundation areas, landscape evolution and developing reliable mitigation plans. Predicting the underlying processes of erosion, phase-separation and deposition in debris flow are long-standing challenges. However, due to lack of data and suitable models, there exists no runout prediction method that includes observed processes of erosion of dry and saturated beds, entrainment and diffusion of eroded material, grain sorting, phase-separation, levee/lobe formation and evolution of deposition patterns. Based on innovative mechanical models for erosion-deposition (Pudasaini and Fischer, 2016a) and phase-separation (Pudasaini and Fischer, 2016b) that explicitly consider changes in local flow compositions, and their basic/potential validations, we present a novel, unified, efficient and fully coupled solution method to these true multi-phase, three-dimensional mass flow problems. As debris flows are better described by a three-phase mixture that include viscous fluid, and fine and coarse grains as compared to often used single-phase models, we propose model extensions that consists of three-phases including yield strength. Thus, we present an advanced mass flow simulation model aiming to

  16. Traditional Nets Interfere with the Uptake of Long-Lasting Insecticidal Nets in the Peruvian Amazon: The Relevance of Net Preference for Achieving High Coverage and Use

    OpenAIRE

    Koen Peeters Grietens; Joan Muela Ribera; Veronica Soto; Alex Tenorio; Sarah Hoibak; Angel Rosas Aguirre; Elizabeth Toomer; Hugo Rodriguez; Alejandro Llanos Cuentas; Umberto D'Alessandro; Dionicia Gamboa; Annette Erhart

    2013-01-01

    BACKGROUND: While coverage of long-lasting insecticide-treated nets (LLIN) has steadily increased, a growing number of studies report gaps between net ownership and use. We conducted a mixed-methods social science study assessing the importance of net preference and use after Olyset(R) LLINs were distributed through a mass campaign in rural communities surrounding Iquitos, the capital city of the Amazonian region of Peru. METHODS: The study was conducted in the catchment area of the Paujil a...

  17. Pro NET Best Practices

    CERN Document Server

    Ritchie, Stephen D

    2011-01-01

    Pro .NET Best Practices is a practical reference to the best practices that you can apply to your .NET projects today. You will learn standards, techniques, and conventions that are sharply focused, realistic and helpful for achieving results, steering clear of unproven, idealistic, and impractical recommendations. Pro .NET Best Practices covers a broad range of practices and principles that development experts agree are the right ways to develop software, which includes continuous integration, automated testing, automated deployment, and code analysis. Whether the solution is from a free and

  18. Getting to Net Zero

    Energy Technology Data Exchange (ETDEWEB)

    2016-09-01

    The technology necessary to build net zero energy buildings (NZEBs) is ready and available today, however, building to net zero energy performance levels can be challenging. Energy efficiency measures, onsite energy generation resources, load matching and grid interaction, climatic factors, and local policies vary from location to location and require unique methods of constructing NZEBs. It is recommended that Components start looking into how to construct and operate NZEBs now as there is a learning curve to net zero construction and FY 2020 is just around the corner.

  19. Instant Lucene.NET

    CERN Document Server

    Heydt, Michael

    2013-01-01

    Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. A step-by-step guide that helps you to index, search, and retrieve unstructured data with the help of Lucene.NET.Instant Lucene.NET How-to is essential for developers new to Lucene and Lucene.NET who are looking to get an immediate foundational understanding of how to use the library in their application. It's assumed you have programming experience in C# already, but not that you have experience with search techniques such as information retrieval theory (although there will be a l

  20. Asymmetrical flow field-flow fractionation coupled to inductively coupled plasma mass spectrometry for sizing SeNPs for packaging applications

    Science.gov (United States)

    Palomo-Siguero, María; Vera, Paula; Echegoyen, Yolanda; Nerin, Cristina; Cámara, Carmen; Madrid, Yolanda

    2017-06-01

    This paper describes the application of Asymmetrical Flow Field-Flow Fractionation (AF4) coupled to diode array detector (DAD) and inductively coupled plasma mass spectrometry (AF4-UV-ICP-MS) to characterize selenium nanoparticles (SeNPs) in an aqueous acrylic adhesive to be used in a multilayer food packaging material. SeNPs were synthesized using a solution-phase approach based on the reduction of selenite with ascorbic acid in presence of different stabilizers compatible with food industry such as polysaccharides (chitosan (poly(D-glucosamine) and hydroxyethylcellulose (HEC)) and non-ionic surfactants (Triton X-100 (t-octylphenoxypolyethoxyethanol), 2,4,7,9-tetramethyl 5decyne-4,7-diol ethoxylate, and isotridecanol ethoxylate). Several parameters such as pH, ascorbic acid and stabilizers concentration, and compatibility of the stabilizer with the adhesive were evaluated. SeNPs suspensions with spherical morphology were obtained except when isotridecanol ethoxylate was employed which provides SeNPs with a nanorod morphology. AF4-DAD-ICP-MS was further applied for sizing the different SeNPs preparations. DAD was used as detector for selecting the best AF4 separation conditions before coupling to ICP-MS to ensure unequivocal identification of NPs. AF4 calibration with polystyrene latex (PSL) beads of known sizes allowed size determination of the different SeNPs. The following estimated hydrodynamic sizes (expressed as the mean ± standard deviation, n = 6 replicates) were found: chitosan-SeNPs- (26 ± 3 nm), TritonX100-SeNPs (22 ± 10 nm) HEC- SeNPs (91 ± 8 nm) and 2,4,7,9-tetramethyl 5decyne-4,7-diol ethoxylate- SeNPs (59 ± 4 nm). The proposed methodology was successfully applied to the characterization in terms of size of aqueous acrylic adhesives containing SeNPs Results from AF4-ICP-MS and TEM shown that only those SeNPs obtained with non-ionic surfactants and HEC were compatible with the adhesive. The results reported here evidence the usefulness of AF4-ICP

  1. Net Zero Energy Buildings

    DEFF Research Database (Denmark)

    Marszal, Anna Joanna; Bourrelle, Julien S.; Musall, Eike

    2010-01-01

    and identify possible renewable energy supply options which may be considered in calculations. Finally, the gap between the methodology proposed by each organisation and their respective national building code is assessed; providing an overview of the possible changes building codes will need to undergo......The international cooperation project IEA SHC Task 40 / ECBCS Annex 52 “Towards Net Zero Energy Solar Buildings”, attempts to develop a common understanding and to set up the basis for an international definition framework of Net Zero Energy Buildings (Net ZEBs). The understanding of such buildings...... parameters used in the calculations are discussed and the various renewable supply options considered in the methodologies are summarised graphically. Thus, the paper helps to understand different existing approaches to calculate energy balance in Net ZEBs, highlights the importance of variables selection...

  2. PhysioNet

    Data.gov (United States)

    U.S. Department of Health & Human Services — The PhysioNet Resource is intended to stimulate current research and new investigations in the study of complex biomedical and physiologic signals. It offers free...

  3. NetSig

    DEFF Research Database (Denmark)

    Horn, Heiko; Lawrence, Michael S; Chouinard, Candace R

    2018-01-01

    Methods that integrate molecular network information and tumor genome data could complement gene-based statistical tests to identify likely new cancer genes; but such approaches are challenging to validate at scale, and their predictive value remains unclear. We developed a robust statistic (Net......Sig) that integrates protein interaction networks with data from 4,742 tumor exomes. NetSig can accurately classify known driver genes in 60% of tested tumor types and predicts 62 new driver candidates. Using a quantitative experimental framework to determine in vivo tumorigenic potential in mice, we found that Net......Sig candidates induce tumors at rates that are comparable to those of known oncogenes and are ten-fold higher than those of random genes. By reanalyzing nine tumor-inducing NetSig candidates in 242 patients with oncogene-negative lung adenocarcinomas, we find that two (AKT2 and TFDP2) are significantly amplified...

  4. TideNet

    Science.gov (United States)

    2015-10-30

    query tide data sources in a desired geographic region of USA and its territories (Figure 1). Users can select a tide data source through the Google Map ...select data sources according to the desired geographic region. It uses the Google Map interface to display data from different sources. Recent...Coastal Inlets Research Program TideNet The TideNet is a web-based Graphical User Interface (GUI) that provides users with GIS mapping tools to

  5. Building Neural Net Software

    OpenAIRE

    Neto, João Pedro; Costa, José Félix

    1999-01-01

    In a recent paper [Neto et al. 97] we showed that programming languages can be translated on recurrent (analog, rational weighted) neural nets. The goal was not efficiency but simplicity. Indeed we used a number-theoretic approach to machine programming, where (integer) numbers were coded in a unary fashion, introducing a exponential slow down in the computations, with respect to a two-symbol tape Turing machine. Implementation of programming languages in neural nets turns to be not only theo...

  6. Interaction Nets in Russian

    OpenAIRE

    Salikhmetov, Anton

    2013-01-01

    Draft translation to Russian of Chapter 7, Interaction-Based Models of Computation, from Models of Computation: An Introduction to Computability Theory by Maribel Fernandez. "In this chapter, we study interaction nets, a model of computation that can be seen as a representative of a class of models based on the notion of 'computation as interaction'. Interaction nets are a graphical model of computation devised by Yves Lafont in 1990 as a generalisation of the proof structures of linear logic...

  7. Programming NET 35

    CERN Document Server

    Liberty, Jesse

    2009-01-01

    Bestselling author Jesse Liberty and industry expert Alex Horovitz uncover the common threads that unite the .NET 3.5 technologies, so you can benefit from the best practices and architectural patterns baked into the new Microsoft frameworks. The book offers a Grand Tour" of .NET 3.5 that describes how the principal technologies can be used together, with Ajax, to build modern n-tier and service-oriented applications. "

  8. Quantification of character-impacting compounds in Ocimum basilicum and 'Pesto alla Genovese' with selected ion flow tube mass spectrometry.

    Science.gov (United States)

    Amadei, Gianluca; Ross, Brian M

    2012-02-15

    Basil (Ocimum basilicum) is an important flavourant plant which constitutes the major ingredient of the pasta sauce 'Pesto alla Genovese'. The characteristic smell of basil stems mainly from a handful of terpenoids (methyl cinnamate, eucalyptol, linalool and estragole), the concentration of which varies according to basil cultivars. The simple and rapid analysis of the terpenoid constituents of basil would be useful as a means to optimise harvesting times and to act as a quality control process for basil-containing foodstuffs. Classical analytical techniques such as gas chromatography/mass spectrometry (GC/MS) are, however, slow, technically demanding and therefore less suitable for routine analysis. A new chemical ionisation technique which allows real-time quantification of traces gases, Selected Ion Flow Tube Mass Spectrometry (SIFT-MS), was therefore utilised to determine its usefulness for the assay of terpenoid concentrations in basil and pesto sauce headspace. Trace gas analysis was performed using the NO(+) precursor ion which minimised interference from other compounds. Character-impacting compound concentration was measured in basil headspace with good reproducibility and statistically significant differences were observed between cultivars. Quantification of linalool in pesto sauce headspace proved more difficult due to the presence of interfering compounds. This was resolved by careful selection of reaction product ions which allowed us to detect differences between various commercial brands of pesto. We conclude that SIFT-MS may be a valid tool for the fast and reproducible analysis of flavourant terpenoids in basil and basil-derived foodstuffs. Copyright © 2011 John Wiley & Sons, Ltd.

  9. Human appropriation of net primary production in the United Kingdom, 1800-2000. Changes in society's impact on ecological energy flows during the agrarian-industrial transition

    Energy Technology Data Exchange (ETDEWEB)

    Musel, Annabella [Institute of Social Ecology, Alpen-Adria University Klagenfurt - Graz - Wien, Schottenfeldgasse 29, 1070 Vienna (Austria)

    2009-12-15

    This paper presents an empirical analysis of the United Kingdom's society's long-term intervention into the energy flows of domestic terrestrial ecosystems through the human appropriation of aboveground net primary production (aHANPP) covering the period 1800-2000. The depicted aHANPP trajectory and the historical development of its components are discussed in view of a continuously increasing population and the transition process from an agrarian to an industrial socioecological regime. During the 19th century, aHANPP shows a steady decline from its level of 71% in 1800. While even higher levels were reached during the mid 20th century, the trend during the last forty years of the period under investigation again shows a reduction of aHANPP, which lies at 68% in the year 2000. The high values of aHANPP in the United Kingdom are primarily attributable to the limited amount of forest in comparison to large agricultural areas. At the beginning of the studied period, the relative stabilisation or even decrease in aHANPP in comparison to population development was made possible through the area expansion of and productivity increases on cropland and permanent pastures. Later this was made possible through the outsourcing of biomass harvest, by satisfying local nutritional demands by means of overseas imports, and as from the mid 20th century through huge amounts of fossil fuel based inputs into agriculture (e.g. increased amounts of fertilizers and motorized traction) which allowed increases in biomass harvest to be decoupled from HANPP. (author)

  10. Combined natural convection and mass transfer effects on unsteady flow past an infinite vertical porous plate embedded in a porous medium with heat source

    Energy Technology Data Exchange (ETDEWEB)

    Das, S.S. [Department of Physics, K B D A V College, Nirakarpur, Khurda-752 019 (Orissa) (India); Tripathy, R.K. [Department of Physics, D R Nayapalli College, Bhubaneswar-751 012 (Orissa) (India); Padhy, R.K. [Department of Physics, D A V Public School, Chandrasekharpur, Bhubaneswar-751 021 (Orissa) (India); Sahu, M. [Department of Physics, Jupiter +2 Women’s Science College, IRC Village, Bhubaneswar-751 015 (Orissa) (India)

    2012-07-01

    This paper theoretically investigates the combined natural convection and mass transfer effects on unsteady flow of a viscous incompressible fluid past an infinite vertical porous plate embedded in a porous medium with heat source. The governing equations of the flow field are solved analytically for velocity, temperature, concentration distribution, skin friction and the rate of heat transfer using multi parameter perturbation technique and the effects of the flow parameters such as permeability parameter Kp, Grashof number for heat and mass transfer Gr, Gc; heat source parameter S, Schmidt number Sc, Prandtl number Pr etc. on the flow field are analyzed and discussed with the help of figures and tables. The permeability parameter Kp is reported to accelerate the transient velocity of the flow field at all points for small values of Kp (£1) and for higher values the effect reverses. The effect of increasing Grashof numbers for heat and mass transfer or heat source parameter is to enhance the transient velocity of the flow field at all points while a growing Schmidt number retards its effect at all points. A growing permeability parameter or heat source parameter increases the transient temperature of the flow field at all points, while a growing Prandtl number shows reverse effect. The effect of increasing Schmidt number is to decrease the concentration boundary layer thickness of the flow field at all points. Further, a growing permeability parameter enhances the skin friction at the wall and a growing Prandtl number shows reverse effect. The effect of increasing Prandtl number or permeability parameter leads to increase the magnitude of the rate of heat transfer at the wall.

  11. Volume changes of Vatnajökull ice cap, Iceland, due to surface mass balance, ice flow, and subglacial melting at geothermal areas

    DEFF Research Database (Denmark)

    Magnússon, Eyjólfur; Björnson, Helgi; Dall, Jørgen

    2005-01-01

    We present observed changes in the geometry of western Vatnajökull over a period of about ten years which are caused by the surface mass balance, ice flow (both during surges and quiescent periods), and basal melting due to geothermal and volcanic activity. Comparison of two digital elevation...

  12. Preliminary review of mass transfer and flow visualization studies and techniques relevant to the study of erosion-corrosion of reactor piping systems

    Energy Technology Data Exchange (ETDEWEB)

    Kuzay, T.M.; Halle, H.J.; Kasza, K.E.

    1988-06-01

    This report provides some background information on the failed piping at the Surry-2 reactor; a summary of pertinent literature on mass transfer in related geometries; and a description of methodologies for visualization and erosion rate measurements in laboratory model studies that can provide greater insight into the role of flow geometry in erosion-corrosion. 18 refs., 9 figs., 1 tab.

  13. Magnetized Converging Flows toward the Hot Core in the Intermediate/High-mass Star-forming Region NGC 6334 V

    Energy Technology Data Exchange (ETDEWEB)

    Juárez, Carmen; Girart, Josep M. [Institut de Ciències de l’Espai, (CSIC-IEEC), Campus UAB, Carrer de Can Magrans, S/N, E-08193 Cerdanyola del Vallès, Catalonia (Spain); Zamora-Avilés, Manuel; Palau, Aina; Ballesteros-Paredes, Javier [Instituto de Radioastronomía y Astrofísica, Universidad Nacional Autónoma de México, P.O. Box 3-72, 58090, Morelia, Michoacán (Mexico); Tang, Ya-Wen; Koch, Patrick M.; Liu, Hauyu Baobab [Academia Sinica Institute of Astronomy and Astrophysics, P.O. Box 23-141, Taipei, 10617, Taiwan (China); Zhang, Qizhou [Harvard-Smithsonian Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Qiu, Keping, E-mail: juarez@ice.cat [School of Astronomy and Space Science, Nanjing University, 163 Xianlin Avenue, Nanjing 210023 (China)

    2017-07-20

    We present Submillimeter Array (SMA) observations at 345 GHz toward the intermediate/high-mass cluster-forming region NGC 6334 V. From the dust emission we spatially resolve three dense condensations, the brightest one presenting the typical chemistry of a hot core. The magnetic field (derived from the dust polarized emission) shows a bimodal converging pattern toward the hot core. The molecular emission traces two filamentary structures at two different velocities, separated by 2 km s{sup −1}, converging to the hot core and following the magnetic field distribution. We compare the velocity field and the magnetic field derived from the SMA observations with magnetohydrodynamic simulations of star-forming regions dominated by gravity. This comparison allows us to show how the gas falls in from the larger-scale extended dense core (∼0.1 pc) of NGC 6334 V toward the higher-density hot core region (∼0.02 pc) through two distinctive converging flows dragging the magnetic field, whose strength seems to have been overcome by gravity.

  14. A simulation analysis of the advective effect on evaporation using a two-phase heat and mass flow model

    Science.gov (United States)

    Zeng, Yijian; Su, Zhongbo; Wan, Li; Wen, Jun

    2011-10-01

    The concept of enhanced vapor transfer in unsaturated soils has been questioned for its reliance on soil temperature gradient, which leads to consideration of other mechanisms of vapor transfer, e.g., advective vapor transfer due to soil air pressure gradient. Although the advective flux is an important portion of evaporation, there is a lack of knowledge of its effect on evaporation. In order to assess the dependence of evaporation on the soil air pressure gradient, a vertical one-dimensional two-phase heat and mass flow model is developed that fully considers diffusion, advection, and dispersion. The proposed model is calibrated with field measurements of soil moisture content and temperature in the Badain Jaran Desert. The proposed model is then used to investigate the advective effect in both low- and high-permeability soils. The advective effect is reflected by underestimating evaporation when the airflow is neglected and is more evident in the low-permeability soil. Neglecting airflow causes an underestimation error of 53.3% on the day right after a rainfall event in the low-permeability soil (7.9 × 10-4 cm s-1) and 33.3% in the high-permeability soil (2 × 10-3 cm s-1). The comparisons of driving forces and conductivities show that the isothermal liquid flux, driven by the soil matric potential gradient, is the main reason for the underestimation error.

  15. Continuous-flow isotope ratio mass spectrometry method for carbon and hydrogen isotope measurements on atmospheric methane

    Directory of Open Access Journals (Sweden)

    M. Brass

    2010-12-01

    Full Text Available We describe a continuous-flow isotope ratio mass spectrometry (CF-IRMS technique for high-precision δD and δ13C measurements of atmospheric methane on 40 mL air samples. CH4 is separated from other air components by utilizing purely physical processes based on temperature, time and mechanical valve switching. Chemical agents are avoided. Trace amounts of interfering compounds can be separated by gas chromatography after pre-concentration of the CH4 sample. The purified sample is then either combusted to CO2 or pyrolyzed to H2 for stable isotope measurement. Apart from connecting samples and refilling liquid nitrogen as coolant the system is fully automated and allows an unobserved, continuous analysis of samples. The analytical system has been used for analysis of air samples with CH4 mixing ratios between ~100 and ~10 000 ppb, for higher mixing ratios samples usually have to be diluted.

  16. Self-similar analysis of fluid flow, heat, and mass transfer at orthogonal nanofluid impingement onto a flat surface

    Science.gov (United States)

    Avramenko, A. A.; Shevchuk, I. V.; Abdallah, S.; Blinov, D. G.; Tyrinov, A. I.

    2017-05-01

    Momentum, heat, and mass transfer in the vicinity of a stagnation point at uniform impingement of a nanofluid onto a flat plate were investigated. The novelty of the work consists in obtaining self-similar forms for the Hiemenz flow of a nanofluid and the self-similar representation of the velocity, thermal, and diffusion boundary layer equations derived on the basis of symmetry analysis using discrete symmetries. Momentum, energy, and concentration equations in the self-similar form were solved numerically. In frames of this analysis, functional dependence of the physical properties of nanofluids (viscosity, thermal conductivity, and diffusion coefficient) on concentration and temperature profiles was included as a part of the mathematical model, whose form enables including different models for the thermophysical properties of the nanofluid. Also novel are numerical results that revealed the influence of the nanoparticle concentration on the velocity, temperature, and concentration profiles, as well as on the normalized Nusselt numbers and surface friction coefficients illustrated in the form of analytical relations and graphically. The focus was put not only on modeling of heating of a colder wall by a hotter nanofluid but also on cooling of a hotter wall by a colder nanofluid. For the latter case, theoretical results were validated against experimental data available in the literature. Effects of various dimensionless parameters on the Nusselt number and surface friction coefficient were elucidated.

  17. Oscillatory flow chemical reactors

    Directory of Open Access Journals (Sweden)

    Slavnić Danijela S.

    2014-01-01

    Full Text Available Global market competition, increase in energy and other production costs, demands for high quality products and reduction of waste are forcing pharmaceutical, fine chemicals and biochemical industries, to search for radical solutions. One of the most effective ways to improve the overall production (cost reduction and better control of reactions is a transition from batch to continuous processes. However, the reactions of interests for the mentioned industry sectors are often slow, thus continuous tubular reactors would be impractically long for flow regimes which provide sufficient heat and mass transfer and narrow residence time distribution. The oscillatory flow reactors (OFR are newer type of tube reactors which can offer solution by providing continuous operation with approximately plug flow pattern, low shear stress rates and enhanced mass and heat transfer. These benefits are the result of very good mixing in OFR achieved by vortex generation. OFR consists of cylindrical tube containing equally spaced orifice baffles. Fluid oscillations are superimposed on a net (laminar flow. Eddies are generated when oscillating fluid collides with baffles and passes through orifices. Generation and propagation of vortices create uniform mixing in each reactor cavity (between baffles, providing an overall flow pattern which is close to plug flow. Oscillations can be created by direct action of a piston or a diaphragm on fluid (or alternatively on baffles. This article provides an overview of oscillatory flow reactor technology, its operating principles and basic design and scale - up characteristics. Further, the article reviews the key research findings in heat and mass transfer, shear stress, residence time distribution in OFR, presenting their advantages over the conventional reactors. Finally, relevant process intensification examples from pharmaceutical, polymer and biofuels industries are presented.

  18. On-line monitoring of bioreactions of Bacillus polymyxa and Klebsiella oxytoca by membrane introduction tandem mass spectrometry with flow injection analysis sampling

    Energy Technology Data Exchange (ETDEWEB)

    Hayward, M.J.; Kotiaho, Tapio; Lister, A.K.; Cooks, R.G.; Austin, G.D.; Narayan, Ramani; Tsao, G.T. (Purdue Univ., West Lafayette, IN (USA))

    1990-09-01

    Membrane introduction mass spectrometry with flow injection analysis sampling has been utilized for on-line monitoring of the major products and the volatile metabolites of fermentation of the Bacillus polymyxa and Klebsiella oxytoca organisms. A flow injection sampling system was used to rapidly deliver fermentation broth or an external standard to the mass spectrometer. Analyte introduction occurred via a direct insertion membrane probe in which the aqueous solutions flowed past a membrane located within the ion source of the mass spectrometer. For both organisms, concentrations of the liquid-phase products acetic acid, acetoin, 2,3-butanediol, and ethanol, were monitored as a function of time after permeation through the membrane and ionization by chemical ionization. Tandem mass spectrometry confirmed that these measurements were made without interference. Off-line gas chromatography was utilized to test the accuracy of these measurements, and excellent agreement was found. The use of tandem mass spectrometry has allowed the detection of additional compounds that were previously not known to be present in measurable amounts.

  19. Effect of Hall current and thermal radiation on heat and mass transfer of a chemically reacting MHD flow of a micropolar fluid through a porous medium

    Directory of Open Access Journals (Sweden)

    J.I. Oahimire

    2014-07-01

    Full Text Available Heat and mass transfer effects on an unsteady flow of a chemically reacting micropolar fluid over an infinite vertical porous plate through a porous medium in the presence of a transverse magnetic field with Hall effect and thermal radiation are studied. The governing system of partial differential equations is transformed to dimensionless equations using dimensionless variables. The dimensionless equations are then solved analytically using the perturbation technique to obtain the expressions for velocity, microrotation, temperature and concentration. With the help of graphs, the effects of the various important parameters entering into the problem on the velocity, microrotation, temperature and concentration fields within the boundary layer are discussed. Also the effects of the pertinent parameters on the skin friction coefficient and rates of heat and mass transfer in terms of the Nusselt number and Sherwood number are presented numerically in a tabular form. The results show that the observed parameters have a significant influence on the flow, heat and mass transfer.

  20. Combined numerical and experimental investigation into the coolant flow hydrodynamics and mass transfer behind the spacer grid in fuel assemblies of the floating power unit reactor

    Directory of Open Access Journals (Sweden)

    S.M. Dmitriev

    2015-09-01

    Full Text Available The results of experimental investigations into the local hydrodynamics and inter-cell mass transfer of the coolant flow in representative zones of the KLT-40C reactor FAs behind the plate-type spacer grid are presented. The investigations were conducted on an aerodynamic rig using the admixture diffusion method (the tracer-gas method. A study into the spatial dispersion of the absolute flow velocity projections and into the distribution of the tracer concentration allowed specify the coolant flow pattern behind the FA plate-type spacer grid of the KLT-40C reactor. The results of measuring the flow friction coefficient in the plate-type spacer grid, depending on the Reynolds number, are presented. Based on the obtained experimental data, recommendations have been provided for updating the procedures to calculate the coolant flow rates for the KLT-40C reactor core by-channel codes. The results of investigating the coolant flow local hydrodynamics and mass transfer in the KLT-40C reactor FAs have been adopted for practical use by Afrikantov OKBM for estimating the heat-engineering reliability of the KLT-40C reactor cores and have been data based for verification of CFD codes and detailed by-channel calculation of the KLT-40C reactor core.

  1. La plataforma .NET

    OpenAIRE

    Fornas Estrada, Miquel

    2008-01-01

    L'aparició de la plataforma .NET Framework ha suposat un canvi molt important en la forma de crear i distribuir aplicacions, degut a que incorpora una sèrie d'innovacions tècniques i productives que simplifiquen molt les tasques necessàries per desenvolupar un projecte. La aparición de la plataforma. NET Framework ha supuesto un cambio muy importante en la forma de crear y distribuir aplicaciones, debido a que incorpora una serie de innovaciones técnicas y productivas que simplifican mucho...

  2. Biological Petri Nets

    CERN Document Server

    Wingender, E

    2011-01-01

    It was suggested some years ago that Petri nets might be well suited to modeling metabolic networks, overcoming some of the limitations encountered by the use of systems employing ODEs (ordinary differential equations). Much work has been done since then which confirms this and demonstrates the usefulness of this concept for systems biology. Petri net technology is not only intuitively understood by scientists trained in the life sciences, it also has a robust mathematical foundation and provides the required degree of flexibility. As a result it appears to be a very promising approach to mode

  3. Contrasting mass-wasting activity in two debris flow-dominated catchments of the Venosta Valley/Vinschgau (Italy): 1945-2014

    Science.gov (United States)

    Lazzarini, Simone; Brardinoni, Francesco; Draganits, Erich; Cavalli, Marco

    2015-04-01

    Debris flows are the most common mass movements within alpine mountainous catchments and main responsible process for sediment delivery from headwaters to streams. Often the delivered unsorted material accumulates as debris-flow lobes on the large debris-flow fans occurring at the outlet of secondary valleys or where the slope becomes less steep. These mass-wasting events are remarkable hazardous process concerning infrastructure and people, especially if villages are located on such fans. Therefore monitoring and analysis of the debris-flow activity is essential in order to mitigate the risk. This study presents the results of a multi-temporal analysis of the debris flow activity and the evolution of the colluvial sediment sources over the last 70 years. Two high-altitude watersheds, close to each other in the Venosta valley (Eastern Italian Alps), were geomorphologically characterized and the transport regimes were identified. The larger basin is Cengles Creek (10.7 km2) and the smaller watershed is Plaies Creek (3.6 km2). The analysis has been carried out using historical aerial photos and digital analogues as well as through geomorphological, sedimentological and hydrological fieldwork. Our results consist of the identification of different geomorphological features and debris-flow activity patterns within the two basins. The Cengles basin is characterized by a diffuse layer of permafrost, a hanging valley floor where alluvial processes predominate and considerable vegetation. Within this catchment the debris-flow activity has been quite stable over the last seven decades, with peak activities related to exceptional events, for example in 1999. On the other hand, the Plaies watershed possesses diffuse steep slopes, virtually no vegetation and a large glacier at its headwaters; also there the mass-wasting activity shows a stable trend with an only exceptional peak, linked to the occurrence of a large event in August 2012. The processes in the catchment area

  4. Net Operating Working Capital, Capital Budgeting, and Cash Budgets: A Teaching Example

    Science.gov (United States)

    Tuner, James A.

    2016-01-01

    Many introductory finance texts present information on the capital budgeting process, including estimation of project cash flows. Typically, estimation of project cash flows begins with a calculation of net income. Getting from net income to cash flows requires accounting for non-cash items such as depreciation. Also important is the effect of…

  5. Assessing basophil activation by using flow cytometry and mass cytometry in blood stored 24 hours before analysis.

    Science.gov (United States)

    Mukai, Kaori; Gaudenzio, Nicolas; Gupta, Sheena; Vivanco, Nora; Bendall, Sean C; Maecker, Holden T; Chinthrajah, Rebecca S; Tsai, Mindy; Nadeau, Kari C; Galli, Stephen J

    2017-03-01

    Basophil activation tests (BATs) have promise for research and for clinical monitoring of patients with allergies. However, BAT protocols vary in blood anticoagulant used and temperature and time of storage before testing, complicating comparisons of results from various studies. We attempted to establish a BAT protocol that would permit analysis of blood within 24 hours of obtaining the sample. Blood from 46 healthy donors and 120 patients with peanut allergy was collected into EDTA or heparin tubes, and samples were stored at 4°C or room temperature for 4 or 24 hours before performing BATs. Stimulation with anti-IgE or IL-3 resulted in strong upregulation of basophil CD203c in samples collected in EDTA or heparin, stored at 4°C, and analyzed 24 hours after sample collection. However, a CD63hi population of basophils was not observed in any conditions in EDTA-treated samples unless exogenous calcium/magnesium was added at the time of anti-IgE stimulation. By contrast, blood samples collected in heparin tubes were adequate for quantification of upregulation of basophil CD203c and identification of a population of CD63hi basophils, irrespective of whether the specimens were analyzed by means of conventional flow cytometry or cytometry by time-of-flight mass spectrometry, and such tests could be performed after blood was stored for 24 hours at 4°C. BATs to measure upregulation of basophil CD203c and induction of a CD63hi basophil population can be conducted with blood obtained in heparin tubes and stored at 4°C for 24 hours. Copyright © 2016 American Academy of Allergy, Asthma & Immunology. Published by Elsevier Inc. All rights reserved.

  6. Evaluation of Flow-Injection Tandem Mass Spectrometry for Rapid and High-Throughput Quantitative Determination of B-Vitamins in Nutritional Supplements

    Energy Technology Data Exchange (ETDEWEB)

    Bhandari, Deepak [ORNL; Van Berkel, Gary J [ORNL

    2012-01-01

    The use of flow-injection electrospray ionization tandem mass spectrometry for rapid and high-throughput mass spectral analysis of selected B-vitamins, viz. B1, B2, B3, B5, and B6, in nutritional formulations was demonstrated. A simple and rapid (~5 min) in-tube sample preparation was performed by adding extraction solvent to a powdered sample aliquot followed by agitation, centrifugation, and filtration to recover an extract for analysis. Automated flow injection introduced 1 L of the extracts directly into the mass spectrometer ion source without chromatographic separation. Sample-to-sample analysis time was 60 s representing significant improvement over conventional liquid chromatography approaches which typically require 25-45 min, and often require more significant sample preparation procedures. Quantitative capabilities of the flow-injection analysis were tested using the method of standard additions and NIST standard reference material (SRM 3280) multivitamin/multielement tablets. The quantity determined for each B-vitamin in SRM 3280 was within the statistical range provided for the respective certified values. The same sample preparation and analysis approach was also applied to two different commercial vitamin supplement tablets and proved to be successful in the quantification of the selected B-vitamins as evidenced by an agreement with the labels values and the results obtained using isotope dilution liquid chromatography/mass spectrometry.

  7. Petri Nets-Applications

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 4; Issue 9. Petri Nets - Applications. Y Narahari. General Article Volume 4 Issue 9 September 1999 pp 44-52. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/004/09/0044-0052. Author Affiliations. Y Narahari ...

  8. Safety nets or straitjackets?

    DEFF Research Database (Denmark)

    Ilsøe, Anna

    2012-01-01

    Does regulation of working hours at national and sector level impose straitjackets, or offer safety nets to employees seeking working time flexibility? This article compares legislation and collective agreements in the metal industries of Denmark, Germany and the USA. The industry has historically...

  9. Coloured Petri Nets

    CERN Document Server

    Jensen, Kurt

    2009-01-01

    Coloured Petri Nets (CPN) is a graphical language for modelling and validating concurrent and distributed systems, and other systems in which concurrency plays a major role. This book introduces the constructs of the CPN modelling language and presents the related analysis methods. It provides a comprehensive road map for the practical use of CPN.

  10. Boom Booom Net Radio

    DEFF Research Database (Denmark)

    Grimshaw, Mark Nicholas; Yong, Louisa; Dobie, Ian

    1999-01-01

    of an existing Internet radio station; Boom Booom Net Radio. Whilst necessity dictates some use of technology-related terminology, wherever possible we have endeavoured to keep such jargon to a minimum and to either explain it in the text or to provide further explanation in the appended glossary....

  11. Game Theory .net.

    Science.gov (United States)

    Shor, Mikhael

    2003-01-01

    States making game theory relevant and accessible to students is challenging. Describes the primary goal of GameTheory.net is to provide interactive teaching tools. Indicates the site strives to unite educators from economics, political and computer science, and ecology by providing a repository of lecture notes and tests for courses using…

  12. Coloured Petri Nets

    DEFF Research Database (Denmark)

    Jensen, Kurt; Kristensen, Lars Michael

    Coloured Petri Nets (CPN) is a graphical language for modelling and validating concurrent and distributed systems, and other systems in which concurrency plays a major role. The development of such systems is particularly challenging because of inherent intricacies like possible nondeterminism...

  13. Flow and heat and mass transfer in laminar and turbulent mist gas-droplets stream over a flat plate

    CERN Document Server

    Terekhov, Victor I

    2014-01-01

    In this book the author presents selected challenges of thermal-hydraulics modeling of two-phase flows in minichannels with change of phase. These encompass the common modeling of flow boiling and flow condensation using the same expression. Approaches to model these two respective cases show, however, that experimental data show different results to those obtained by methods of calculation of heat transfer coefficient for respective cases. Partially that can be devoted to the fact that there are non-adiabatic effects present in both types of phase change phenomena which modify the pressure drop due to friction, responsible for appropriate modelling. The modification of interface shear stresses between flow boiling and flow condensation in case of annular flow structure may be considered through incorporation of the so called blowing parameter, which differentiates between these two modes of heat transfer. On the other hand, in case of bubbly flows, the generation of bubbles also modifies the friction pressur...

  14. r.avaflow: An advanced open source computational framework for the GIS-based simulation of two-phase mass flows and process chains

    Science.gov (United States)

    Mergili, Martin; Fischer, Jan-Thomas; Fellin, Wolfgang; Ostermann, Alexander; Pudasaini, Shiva P.

    2015-04-01

    Geophysical mass flows stand for a broad range of processes and process chains such as flows and avalanches of snow, soil, debris or rock, and their interactions with water bodies resulting in flood waves. Despite considerable efforts put in model development, the simulation, and therefore the appropriate prediction of these types of events still remains a major challenge in terms of the complex material behaviour, strong phase interactions, process transformations and the complex mountain topography. Sophisticated theories exist, but they have hardly been brought to practice yet. We fill this gap by developing a novel and unified high-resolution computational tool, r.avaflow, representing a comprehensive and advanced open source GIS simulation environment for geophysical mass flows. Based on the latest and most advanced two-phase physical-mathematical models, r.avaflow includes the following features: (i) it is suitable for a broad spectrum of mass flows such as rock, rock-ice and snow avalanches, glacial lake outburst floods, debris and hyperconcentrated flows, and even landslide-induced tsunamis and submarine landslides, as well as process chains involving more than one of these phenomena; (ii) it accounts for the real two-phase nature of many flow types: viscous fluids and solid particles are considered separately with advanced mechanics and strong phase interactions; (iii) it is freely available and adoptable along with the GRASS GIS software. In the future, it will include the intrinsic topographic influences on the flow dynamics and morphology as well as an advanced approach to simulate the entrainment and deposition of solid and fluid material. As input r.avaflow needs information on (a) the mountain topography, (b) the material properties and (c) the spatial distribution of the solid and fluid release masses or one or more hydrographs of fluid and solid material. We demonstrate the functionalities and performance of r.avaflow by using some generic and real

  15. In-house validation of a method for determination of silver nanoparticles in chicken meat based on asymmetric flow field-flow fractionation and inductively coupled plasma mass spectrometric detection

    DEFF Research Database (Denmark)

    Löschner, Katrin; Navratilova, Jana; Grombe, Ringo

    2015-01-01

    spectrometric detection (AF4-ICP-MS) was applied for quantitative analysis of silver nanoparticles (AgNPs) in a chicken meat matrix following enzymatic sample preparation. For the first time an analytical validation of nanoparticle detection in a food matrix by AF4-ICP-MS has been carried out and the results......Nanomaterials are increasingly used in food production and packaging, and validated methods for detection of nanoparticles (NPs) in foodstuffs need to be developed both for regulatory purposes and product development. Asymmetric flow field-flow fractionation with inductively coupled plasma mass...... showed repeatable and intermediately reproducible determination of AgNP mass fraction and size. The findings demonstrated the potential of AF4-ICP-MS for quantitative analysis of NPs in complex food matrices for use in food monitoring and control. The accurate determination of AgNP size distribution...

  16. Differentiation of Aurantii Fructus Immaturus from Poniciri Trifoliatae Fructus Immaturus using flow-injection mass spectrometric (FIMS) metabolic fingerprinting method combined with chemometrics.

    Science.gov (United States)

    Zhao, Yang; Chang, Yuan-Shiun; Chen, Pei

    2015-03-25

    A flow-injection mass spectrometric metabolic fingerprinting method in combination with chemometrics was used to differentiate Aurantii Fructus Immaturus from its counterfeit Poniciri Trifoliatae Fructus Immaturus. Flow-injection mass spectrometric (FIMS) fingerprints of 9 Aurantii Fructus Immaturus samples and 12 Poniciri Trifoliatae Fructus Immaturus samples were acquired and analyzed using principal component analysis (PCA) and soft independent modeling of class analogy (SIMCA). The authentic herbs were differentiated from their counterfeits easily. Eight characteristic components which were responsible for the differences between the samples were tentatively identified. Furthermore, three out of the eight components, naringin, hesperidin, and neohesperidin, were quantified. The results are useful to help identify the authenticity of Aurantii Fructus Immaturus. Published by Elsevier B.V.

  17. Fuzzy net present value for engineering analysis

    Directory of Open Access Journals (Sweden)

    Ali Nazeri

    2012-10-01

    Full Text Available Cash flow analysis is one of the most popular methods for investigating the outcome of an economical project. The costs and benefits of a construction project are often involved with uncertainty and it is not possible to find a precise value for a particular project. In this paper, we present a simple method to calculate the net present value of a cash flow when both costs and benefits are given as triangular numbers. The proposed model of this paper uses Delphi method to figure out the fair values of all costs and revenues and then using fizzy programming techniques, it calculates the fuzzy net present value. The implementation of the proposed model is demonstrated using a simple example.

  18. Group Theoretical Analysis of non-Newtonian Fluid Flow, Heat and Mass Transfer over a Stretching Surface in the Presence of Thermal Radiation

    OpenAIRE

    Muhammad Tufail; Adnan Saeed Butt; Asif Ali

    2016-01-01

    The present article examines the flow, heat and mass transfer of a non-Newtonian fluid known as Casson fluid over a stretching surface in the presence of thermal radiations effects. Lie Group analysis is used to reduce the governing partial differential equations into non-linear ordinary differential equations. These equations are then solved by an analytical technique known as Homotopy Analysis Method (HAM). A comprehensive study of the problem is being made for various parameters i...

  19. Seasonal changes of the quantitative importance of protozoans in a large lake : an ecosystem approach using mass-balanced carbon flow diagrams

    OpenAIRE

    Gaedke, Ursula; Straile, Dietmar

    1994-01-01

    Based on comprehensive measurements of plankton abundance and production, quantitative carbon flow diagrams were established for the pelagic community of a large lake (L. Constance) for ten successive time intervals during the seasonal course of 1987. Using reasonable diet compositions and parameters (e.g. trophic transfer efficiencies in the range of l0-35%), mass-balance conditions could be fulfilled for individual compartments and the entire food web, provided that ciliate growth rates use...

  20. Hot-wire air flow meter for gasoline fuel-injection system. Calculation of air mass in cylinder during transient condition; Gasoline funsha system yo no netsusenshiki kuki ryuryokei. Kato untenji no cylinder juten kukiryo no keisan

    Energy Technology Data Exchange (ETDEWEB)

    Oyama, Y. [Hitachi Car Engineering, Ltd., Tokyo (Japan); Nishimura, Y.; Osuga, M.; Yamauchi, T. [Hitachi, Ltd., Tokyo (Japan)

    1997-10-01

    Air flow characteristics of hot-wire air flow meters for gasoline fuel-injection systems with supercharging and exhaust gas recycle during transient conditions were investigated to analyze a simple method for calculating air mass in cylinder. It was clarified that the air mass in cylinder could be calculated by compensating for the change of air mass in intake system by using aerodynamic models of intake system. 3 refs., 6 figs., 1 tab.

  1. Food Safety Nets:

    OpenAIRE

    Haggblade, Steven; Diallo, Boubacar; Staatz, John; Theriault, Veronique; Traoré, Abdramane

    2013-01-01

    Food and social safety nets have a history as long as human civilization. In hunter gatherer societies, food sharing is pervasive. Group members who prove unlucky in the short run, hunting or foraging, receive food from other households in anticipation of reciprocal consideration at a later time (Smith 1988). With the emergence of the first large sedentary civilizations in the Middle East, administrative systems developed specifically around food storage and distribution. The ancient Egyptian...

  2. Net technical assessment

    OpenAIRE

    Wegmann, David G.

    1989-01-01

    Approved for public release; distribution is unlimited. The present and near term military balance of power between the U.S. and the Soviet Union can be expressed in a variety of net assessments. One can examine the strategic nuclear balance, the conventional balance in Europe, the maritime balance, and many others. Such assessments are essential not only for policy making but for arms control purposes and future force structure planning. However, to project the future military balance, on...

  3. Using WordNet for Building WordNets

    CERN Document Server

    Farreres, X; Farreres, Xavier; Rodriguez, Horacio; Rigau, German

    1998-01-01

    This paper summarises a set of methodologies and techniques for the fast construction of multilingual WordNets. The English WordNet is used in this approach as a backbone for Catalan and Spanish WordNets and as a lexical knowledge resource for several subtasks.

  4. Dufour and Soret Effects on Convection Heat and Mass Transfer in an Electrical Conducting Power Law Flow over a Heated Porous Plate

    Science.gov (United States)

    Olanrewaju, P. O.; Fenuga, O. J.; Gbadeyan, J. A.; Okedayo, T. G.

    2013-01-01

    In this paper, the influence of thermal and thermo diffusion on convection heat and mass transfer in an electrically conducting power law flow over a heated porous plate in the presence of magnetic field has been considered. The similarity solution is used to transform the system of partial differential equations into a boundary value problem of coupled ordinary differential equations. Runge Kutta of sixth order has been used along with a shooting method for better accuracy. The results were presented as velocity, temperature, and concentration fields for pseudoplastic and dilatant fluids for different values of the embedded flow parameters. The results are presented graphically and the conclusion is drawn that the flow field and other quantities of physical interests are significantly influenced by these parameters.

  5. Influence of solid particles to a coriolis mass flow metering; Einfluss von Feststoffen in einer Fluessigkeitsstroemung auf die Coriolis-Massemessung

    Energy Technology Data Exchange (ETDEWEB)

    Goeke, J.; Steffensen, E. [Fachhochschule Koeln (Germany). Fakultaet Anlagen-, Energie- und Maschinensysteme

    2006-07-01

    Since more than 15 years coriolis mass flow meters could be regarded as an extraordinary metering system. Those old mechanical principle could be enhanced by application of new electronic technique. Today high precise technologies are available for the rough industrial application, which are often distorted from enviromental influences. Nevertheless there exist situations, which the rapid chance of parameters affect the state of the swinging metering system. And the algorithm could not react in an suggestive manner. This problem occurs for example at a two phase flow. Within this paper we present the reaction of a coriolis massflow meter in a liquid flow with little solid particles. The result show small deviations between the experimental results and the thoretical calculations. (orig.)

  6. Modeling and simulation of the mass flow and reaction kinetics in a continuous Kamyr steam/liquor phase digester

    Directory of Open Access Journals (Sweden)

    Finn Are Michelsen

    1994-01-01

    Full Text Available The motion of the mass in a continuous digester can be described by the Navier-Stokes equations together with mass balances for the chip plug and the free liquor. The component balances for the wood and liquor materials fulfil the mass balances. These equations are solved to help understanding the dynamics connected to motion and chemical reactions taking place in the digester. Simulated profiles are shown in this paper.

  7. Modeled mass and temperature effects of released and entrained snow on the lubricated flow regime of avalanches at bird hill, southcentral Alaska

    Science.gov (United States)

    Wikstrom Jones, Katreeen

    The unpredictable effects of entrained snow on avalanche flow make the tasks of assessing avalanche run-out distances and deciding on road closures very difficult. At Bird Hill in southcentral Alaska, snow entrainment has caused small release volumes (RAMMS was implemented to examine how mass and temperature of released and entrained snow affect development of lubricated flow regime and impact run-out distances at Bird Hill. The results showed that temperature was more critical than mass in determining flow regime, with a close correlation between meltwater production and long run-out distances. Meltwater lubricates the avalanche at the base, drastically reducing basal friction and allowing it to glide over the ground. Bird Hill's large drop height (1000 m) and rough terrain (due to shallow snow cover) contributed to the warming of the avalanche core in the simulations. The entrained snow temperature appeared critical in determining the effects of released and entrained snow volumes. Cold releases (-5°C, -8°C), constrained by the "Wet snow" RKE regime in RAMMS, regardless of volume, only generated long run-outs with entrained snow of ≥ -1°C. Depending on the entrained snow temperature, small ( 15,000 m3) medium warm releases produced meltwater due to dissipated heat from random kinetic energy produced in the upper elevations. Monitoring of warming snow cover temperatures and mapping of terrain features that could affect avalanche flow may help avalanche forecasters better understand the variability of run-out distances.

  8. Heat-transfer and pressure distributions for laminar separated flows downstream of rearward-facing steps with and without mass suction

    Science.gov (United States)

    Brown, R. D.; Jakubowski, A. K.

    1974-01-01

    Heat-transfer and pressure distributions were measured for laminar separated flows downstream of rearward-facing steps with and without mass suction. The flow conditions were such that the boundary-layer thickness was comparable to or larger than the step height. For both suction and no-suction cases, an increase in the step height resulted in a sharp decrease in the initial heat-transfer rates behind the step. Downstream, however, the heat transfer gradually recovered back to less than or near attached-flow values. Mass suction from the step base area increased the local heat-transfer rates; however, this effect was relatively weak for the laminar flows considered. Even removal of the entire approaching boundary layer raised the post-step heat-transfer rates only about 10 percent above the flatplate values. Post-step pressure distributions were found to depend on the entrainment conditions at separation. In the case of the solid-faced step, a sharp pressure drop behind the step was followed by a very short plateau and relatively fast recompression. For the slotted-step connected to a large plenum but without suction, the pressure drop at the base was much smaller and the downstream recompression more gradual than that for solid-faced step.

  9. r.avaflow v1, an advanced open-source computational framework for the propagation and interaction of two-phase mass flows

    Science.gov (United States)

    Mergili, Martin; Fischer, Jan-Thomas; Krenn, Julia; Pudasaini, Shiva P.

    2017-02-01

    r.avaflow represents an innovative open-source computational tool for routing rapid mass flows, avalanches, or process chains from a defined release area down an arbitrary topography to a deposition area. In contrast to most existing computational tools, r.avaflow (i) employs a two-phase, interacting solid and fluid mixture model (Pudasaini, 2012); (ii) is suitable for modelling more or less complex process chains and interactions; (iii) explicitly considers both entrainment and stopping with deposition, i.e. the change of the basal topography; (iv) allows for the definition of multiple release masses, and/or hydrographs; and (v) serves with built-in functionalities for validation, parameter optimization, and sensitivity analysis. r.avaflow is freely available as a raster module of the GRASS GIS software, employing the programming languages Python and C along with the statistical software R. We exemplify the functionalities of r.avaflow by means of two sets of computational experiments: (1) generic process chains consisting in bulk mass and hydrograph release into a reservoir with entrainment of the dam and impact downstream; (2) the prehistoric Acheron rock avalanche, New Zealand. The simulation results are generally plausible for (1) and, after the optimization of two key parameters, reasonably in line with the corresponding observations for (2). However, we identify some potential to enhance the analytic and numerical concepts. Further, thorough parameter studies will be necessary in order to make r.avaflow fit for reliable forward simulations of possible future mass flow events.

  10. Numerical investigation of the influence of particle-particle and particle-wall collisions in turbulent wall-bounded flows at high mass loadings

    Energy Technology Data Exchange (ETDEWEB)

    Alletto, Michael

    2014-05-16

    The present work deals with the simulation of turbulent particle-laden flows at high mass loadings. In order to achieve this goal, the fluid flow is described by means of the eddy-resolving concept known as Large-Eddy Simulation (LES) and the particles are described in a Lagrangian frame of reference. Special emphasis is placed on the interparticle collisions and the impact of solid particles on rough walls. Both mechanisms are shown to be crucial for the correct description of the particle dynamics in wall-bounded flows. In order to distinguish the present methodology from the variety of methods available in the literature to treat turbulent flows laden with solid particles, the thesis starts with an overview of different simulation techniques to calculate this class of flows. In this overview special care is taken to underline the parameter space, where the different simulation methods are valid. After that, the governing equations and the boundary conditions applied for the continuous phase of the Euler-Lagrange approach used in the present thesis are given. In the subsequent section the governing equations for the solid particles and their interaction with smooth and rough walls are discussed. Here a new wall roughness model for the particles which incorporates an amplitude parameter used in technical applications such as the mean roughness height or the root-mean-squared roughness is presented. After that, the coupling mechanisms between the phases and the algorithmic realization are discussed. Furthermore, a new agglomeration model capable to treat interparticle collisions with friction is presented. However, the agglomeration model is not evaluated in such a detail as the interparticle collisions and the particle-wall collisions. The reason is that it does not represent a central aspect of this thesis. The numerical methods for the continuous and the disperse phase are presented in the subsequent section. The efficient algorithm to detect the interparticle

  11. Discriminant analysis for the prediction of sand mass distribution in an urban stormwater holding pond using simulated depth average flow velocity data.

    Science.gov (United States)

    Dominic, Jeremy Andy; Aris, Ahmad Zaharin; Sulaiman, Wan Nor Azmin; Tahir, Wan Zakaria Wan Md

    2016-03-01

    The approach of this paper is to predict the sand mass distribution in an urban stormwater holding pond at the Stormwater Management And Road Tunnel (SMART) Control Centre, Malaysia, using simulated depth average floodwater velocity diverted into the holding during storm events. Discriminant analysis (DA) was applied to derive the classification function to spatially distinguish areas of relatively high and low sand mass compositions based on the simulated water velocity variations at corresponding locations of gravimetrically measured sand mass composition of surface sediment samples. Three inflow parameter values, 16, 40 and 80 m(3) s(-1), representing diverted floodwater discharge for three storm event conditions were fixed as input parameters of the hydrodynamic model. The sand (grain size > 0.063 mm) mass composition of the surface sediment measured at 29 sampling locations ranges from 3.7 to 45.5%. The sampling locations of the surface sediment were spatially clustered into two groups based on the sand mass composition. The sand mass composition of group 1 is relatively lower (3.69 to 12.20%) compared to group 2 (16.90 to 45.55%). Two Fisher's linear discriminant functions, F 1 and F 2, were generated to predict areas; both consist of relatively higher and lower sand mass compositions based on the relationship between the simulated flow velocity and the measured surface sand composition at corresponding sampling locations. F 1 = -9.405 + 4232.119 × A - 1795.805 × B + 281.224 × C, and F 2 = -2.842 + 2725.137 × A - 1307.688 × B + 231.353 × C. A, B and C represent the simulated flow velocity generated by inflow parameter values of 16, 40 and 80 m(3) s(-1), respectively. The model correctly predicts 88.9 and 100.0% of sampling locations consisting of relatively high and low sand mass percentages, respectively, with the cross-validated classification showing that, overall, 82.8% are correctly

  12. HEAT AND MASS TRANSFER EFFECTS ON FLOW PAST PARABOLIC STARTING MOTION OF ISOTHERMAL VERTICAL PLATE IN THE PRESENCE OF FIRST ORDER CHEMICAL REACTION

    Directory of Open Access Journals (Sweden)

    R. Muthucumaraswamy

    2013-06-01

    Full Text Available An exact solution of unsteady flow past a parabolic starting motion of the infinite isothermal vertical plate with uniform mass diffusion, in the presence of a homogeneous chemical reaction of the first order, has been studied. The plate temperature and the concentration level near the plate are raised uniformly. The dimensionless governing equations are solved using the Laplace transform technique. The effect of velocity profiles are studied for different physical parameters, such as chemical reaction parameter, thermal Grashof number, mass Grashof number, Schmidt number, and time. It is observed that velocity increases with increasing values of thermal Grashof number or mass Grashof number. The trend is reversed with respect to the chemical reaction parameter.

  13. Effect of microscale protrusions on local fluid flow and mass transport in the presence of forced convection

    Energy Technology Data Exchange (ETDEWEB)

    Matzen, Gehard W. [Univ. of California, Berkeley, CA (United States)

    1997-01-01

    Three-dimensional creeping flow around single, axisymmetric protrusions is studied numerically using the boundary-integral technique. Emphasis is placed upon cylindrical protrusions on plane walls for various height-to-radius (h-to-a) aspect ratios, but cones and sections of spheres protruding from plane walls are also briefly examined. The presented items include shear-stress distributions, shear-stress contours, extents of the fluid-flow disturbance, total forces and torques on the cylinders, streamlines, and skin-friction lines. Also included is a discussion of flow topology around axisymmetric geometries. No flow reversal is observed for cylindrical protrusions with aspect ratios greater than 2.4 to 2.6. At higher aspect ratios, the fluid tends to be swept around cylindrical protrusions with little vertical motion. At lower aspect ratios, the strength of the recirculation increases, and the recirculation region becomes wider in the transverse direction and narrower in the flow direction. Also, the recirculation pattern begins to resemble the closed streamline patterns in two-dimensional flow over square ridges. However, unlike two-dimensional flow, closed streamline patterns are not observed. For arbitrary axisymmetric geometries, the extent of the fluid-flow disturbance can be estimated with the total force that is exerted on the protrusion. When the same force is exerted on protrusions with different aspect ratios, the protrusion with the higher aspect ratio tends to have a greater disturbance in the flow direction and a smaller disturbance in the transverse direction. The total force exerted on cylindrical protrusions with rounded corners is only slightly lower than the total force exerted on cylindrical protrusions with sharp corners.

  14. IMPACT OF HEAVY METAL TO FISH AQUACULTURE IN FLOATING NET CAGE IN CIRATA RESERVOIR, INDONESIA

    Directory of Open Access Journals (Sweden)

    Tri Heru Prihadi

    2008-06-01

    Full Text Available Utilization of Cirata Reservoir for fisheries aquaculture with floating net cage system has been increasing rapidly. Industrial waste existed along watershed brings significant heavy metal pollutant that flows and difficult to control. Consequences of such activities were reflected in the degradation of reservoir environment indicated by sedimentation, water quality degradation and fish mass mortality because of up welling. The objectives of this research were: 1 to obtain data and information on heavy metal content in Cirata Reservoir waters, and 2 to observe and understand the effect of heavy metal to the fish cultured in floating net cage to support aquaculture in floating net cage system. Water quality and fish histology analyses were the methodologies used in this research. Descriptive and laboratory analysis were carry out to analysis the data. Based on observation and descriptive analyses, the content of heavy metal in Cirata Reservoir was classified as worse. Concentration of Pb, Cr, Hg, and Cd in the sample of water and tilapia digestive organ becomes fragile. Infiltration of hemoglobin cell, necrosis, degeneration and pigmentation occurred in body organs when up welling happened. Beside that, during up-welling digestive organ become easily breakable resulted in fish mass mortality in floating net cage. The affinity of hemoglobin to the toxic gas was higher than to oxygen, therefore aeration was not affective and mass mortality cannot be avoided. This was because of various events that occured to the fish and the other water biota that encompassed regular diffusion, bio-magnification, and bio-concentration to fish.

  15. Proof nets for lingusitic analysis

    NARCIS (Netherlands)

    Moot, R.C.A.

    2002-01-01

    This book investigates the possible linguistic applications of proof nets, redundancy free representations of proofs, which were introduced by Girard for linear logic. We will adapt the notion of proof net to allow the formulation of a proof net calculus which is soundand complete for the

  16. Teaching Tennis for Net Success.

    Science.gov (United States)

    Young, Bryce

    1989-01-01

    A program for teaching tennis to beginners, NET (Net Easy Teaching) is described. The program addresses three common needs shared by tennis students: active involvement in hitting the ball, clearing the net, and positive reinforcement. A sample lesson plan is included. (IAH)

  17. Net4Care Ecosystem Website

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak; Hansen, Klaus Marius; Rasmussen, Morten

    2012-01-01

    is a tele-monitoring scenario in which Net4Care clients are deployed in a gateway in private homes. Medical devices then connect to these gateways and transmit their observations to a Net4Care server. In turn the Net4Care server creates valid clinical HL7 documents, stores them in a national XDS repository...

  18. Plasma Sensor for High Bandwidth Mass-Flow Measurements at High Mach Numbers with RF Link Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposal is aimed at the development of a miniature high bandwidth (1 MHz class) plasma sensor for flow measurements at high enthalpies. This device uses a...

  19. THE WORK SIMULATION OF FLOW RATE FOR CARRIAGES' REPAIR AS A MULTIPHASE, MULTIPLEX AND MULTIDISCIPLINARY SYSTEM OF MASS SERVICE

    Directory of Open Access Journals (Sweden)

    V. V. Myamlin

    2011-04-01

    Full Text Available The algorithm of computer simulation of the flexible flow for repair of cars as a multiphase polychannel manyobject queuing system is presented. The basic operators of the model are given and their work is described.

  20. Gas chromatography flow rates for determining deuterium/hydrogen ratios of natural gas by gas chromatography/high-temperature conversion/isotope ratio mass spectrometry.

    Science.gov (United States)

    Jia, Wanglu; Peng, Ping'an; Liu, Jinzhong

    2008-08-01

    The effects of the gas chromatography flow rate on the determination of the deuterium/hydrogen (D/H) ratios of natural gas utilising gas chromatography/high-temperature conversion/isotope ratio mass spectrometry (GC/TC/IRMS) have been evaluated. In general, the measured deltaD values of methane, ethane and propane decrease with increase in column flow rate. When the column flow rate is 1 mL/min or higher, which is commonly used for the determination of D/H ratios of natural gas, the organic H in gas compounds may not be completely converted into hydrogen gas. Based on the results of experiments conducted on a GC column with an i.d. of 0.32 mm, a GC flow rate of 0.6 mL/min is proposed for determining the D/H ratios of natural gas by GC/TC/IRMS. Although this value may be dependent on the instrument conditions used in this work, we believe that correct deltaD values of organic compounds with a few carbon atoms are obtained only when relatively low GC flow rates are used for D/H analysis by GC/TC/IRMS. Moreover, as the presence of trace water could significantly affect the determination of D/H ratios, a newly designed inlet liner was used to remove trace water contained in some gas samples. Copyright (c) 2008 John Wiley & Sons, Ltd.

  1. The development of a hydrodynamic flow assisted double junction interface for signal improvement in capillary electrophoresis-mass spectrometry using positively charged nonvolatile additives.

    Science.gov (United States)

    Wang, Nan Hsuan; Her, Guor Rong

    2015-01-30

    To alleviate signal suppression resulting from nonvolatile positive ion additives, a hydrodynamic flow assisted double junction capillary electrophoresis-mass spectrometry (CE-MS) interface was proposed. The double junction interface which could alleviate the ion suppression due to nonvolatile negative ion additives was modified so that a hydrodynamic flow could be introduced to the interface. Using this setup, the apparent velocity of the ions was determined based on its electrophoretic mobility, electroosmotic flow in the transfer capillary, and hydrodynamic flow introduced by the syringe pump. CE-MS analysis of positively charged triazines was performed to demonstrate the practical value of this approach by using cetyltrimethylammonium ion (CTA(+)) as an additive. Because the separation column was dynamically coated with CTA(+), the EOF was reversed and the separation was performed under counter EOF mode. Under an appropriate hydrodynamic flow, the analytes (triazines) could be propagated toward the MS, whereas the additive (CTA(+)) ion was retained in the interface. Consequently, the problem of signal suppression by CTA(+) was alleviated, and the signals were enhanced more than 20-fold. Copyright © 2014 Elsevier B.V. All rights reserved.

  2. Performance analysis of a continuous serpentine flow reactor for electrochemical oxidation of synthetic and real textile wastewater: Energy consumption, mass transfer coefficient and economic analysis.

    Science.gov (United States)

    Pillai, Indu M Sasidharan; Gupta, Ashok K

    2017-05-15

    A continuous flow electrochemical reactor was developed, and its application was tested for the treatment of textile wastewater. A parallel plate configuration with serpentine flow was chosen for the continuous flow reactor. Uniparameter optimization was carried out for electrochemical oxidation of synthetic and real textile wastewater (collected from the inlet of the effluent treatment plant). Chemical Oxygen Demand (COD) removal efficiency of 90% was achieved for synthetic textile wastewater (initial COD - 780 mg L-1) at a flow rate of 500 mL h-1 (retention time of 6 h) and a current density of 1.15 mA cm-2 and the energy consumption for the degradation was 9.2 kWh (kg COD)-1. The complete degradation of real textile wastewater (initial COD of 368 mg L-1) was obtained at a current density of 1.15 mA cm-2, NaCl concentration of 1 g L-1 and retention time of 6 h. Energy consumption and mass transfer coefficient of the reactions were calculated. The continuous flow reactor performed better than batch reactor with reference to energy consumption and economy. The overall treatment cost for complete COD removal of real textile wastewater was 5.83 USD m-3. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Two-region mass transfer to account for 2D profile scale heterogeneity in a 1D effective plot scale flow model

    Science.gov (United States)

    Filipovic, Vilim; Coquet, Yves; Gerke, Horst H.

    2017-04-01

    In arable soil landscapes, specific spatial heterogeneities related to tillage and trafficking can influence the movement of water and chemicals. The structure in the topsoil is characterized by spatial patterns with locally compacted zones. The contrasting hydraulic properties of more-and-less compacted soil zones can result in heterogeneous flow fields and preferential flow. Two- or three-dimensional models used to account for soil spatial variability are relatively too complex when trying to include local heterogeneities in the description of field scale flow and transport problems. The idea was to reduce the model complexity linked to the explicit description of heterogeneities in 2D or 3D without deteriorating the validity of simulation results. When reducing the spatial dimensionality, the geometry in a 2D, cross-sectional explicit plot description is removed on the expense of an increased complexity of the 1D model with two flow domains and mass exchange between them. Our objective was to design a simplified 1D model approach that effectively accounts for plot-scale soil structural variability. In this simplified 1D model, effective soil hydraulic parameters can be assigned to each of the two domains separately. Different theoretical scenarios simulating different shape, size and arrangement of compacted clods in the tilled layer were set to estimate their effect on solute behaviour. The mass exchange parameters could be determined from structure quantification and by comparing simplified 1D with reference 2D results accounting for defined soil structural (i.e., here the compacted regions) geometries. The mass exchange is strongly related to the geometry of the compacted zones including their distribution and size within the non-compacted soil. Additionally, the simplified model approach was tested by comparing it with measured results from a field tracer experiment.

  4. Master Robotic Net

    Directory of Open Access Journals (Sweden)

    Vladimir Lipunov

    2010-01-01

    Full Text Available The main goal of the MASTER-Net project is to produce a unique fast sky survey with all sky observed over a single night down to a limiting magnitude of 19-20. Such a survey will make it possible to address a number of fundamental problems: search for dark energy via the discovery and photometry of supernovae (including SNIa, search for exoplanets, microlensing effects, discovery of minor bodies in the Solar System, and space-junk monitoring. All MASTER telescopes can be guided by alerts, and we plan to observe prompt optical emission from gamma-ray bursts synchronously in several filters and in several polarization planes.

  5. Art/Net/Work

    DEFF Research Database (Denmark)

    Andersen, Christian Ulrik; Lindstrøm, Hanne

    2006-01-01

    The seminar Art|Net|Work deals with two important changes in our culture. On one side, the network has become essential in the latest technological development. The Internet has entered a new phase, Web 2.0, including the occurrence of as ‘Wiki’s’, ‘Peer-2-Peer’ distribution, user controlled...... the praxis of the artist. We see different kinds of interventions and activism (including ‘hacktivism’) using the network as a way of questioning the invisible rules that govern public and semi-public spaces. Who ‘owns’ them? What kind of social relationships do they generate? On what principle...

  6. Helminth.net: expansions to Nematode.net and an introduction to Trematode.net

    Science.gov (United States)

    Martin, John; Rosa, Bruce A.; Ozersky, Philip; Hallsworth-Pepin, Kymberlie; Zhang, Xu; Bhonagiri-Palsikar, Veena; Tyagi, Rahul; Wang, Qi; Choi, Young-Jun; Gao, Xin; McNulty, Samantha N.; Brindley, Paul J.; Mitreva, Makedonka

    2015-01-01

    Helminth.net (http://www.helminth.net) is the new moniker for a collection of databases: Nematode.net and Trematode.net. Within this collection we provide services and resources for parasitic roundworms (nematodes) and flatworms (trematodes), collectively known as helminths. For over a decade we have provided resources for studying nematodes via our veteran site Nematode.net (http://nematode.net). In this article, (i) we provide an update on the expansions of Nematode.net that hosts omics data from 84 species and provides advanced search tools to the broad scientific community so that data can be mined in a useful and user-friendly manner and (ii) we introduce Trematode.net, a site dedicated to the dissemination of data from flukes, flatworm parasites of the class Trematoda, phylum Platyhelminthes. Trematode.net is an independent component of Helminth.net and currently hosts data from 16 species, with information ranging from genomic, functional genomic data, enzymatic pathway utilization to microbiome changes associated with helminth infections. The databases’ interface, with a sophisticated query engine as a backbone, is intended to allow users to search for multi-factorial combinations of species’ omics properties. This report describes updates to Nematode.net since its last description in NAR, 2012, and also introduces and presents its new sibling site, Trematode.net. PMID:25392426

  7. NETS FOR PEACH PROTECTED CULTIVATION

    Directory of Open Access Journals (Sweden)

    Evelia Schettini

    2012-06-01

    Full Text Available The aim of this paper was to investigate the radiometric properties of coloured nets used to protect a peach cultivation. The modifications of the solar spectral distribution, mainly in the R and FR wavelength band, influence plant photomorphogenesis by means of the phytochrome and cryptochrome. The phytochrome response is characterized in terms of radiation rate in the red wavelengths (R, 600-700 nm to that in the farred radiation (FR, 700-800 nm, i.e. the R/FR ratio. The effects of the blue radiation (B, 400-500 nm is investigated by the ratio between the blue radiation and the far-red radiation, i.e. the B/FR ratio. A BLUE net, a RED net, a YELLOW net, a PEARL net, a GREY net and a NEUTRAL net were tested in Bari (Italy, latitude 41° 05’ N. Peach trees were located in pots inside the greenhouses and in open field. The growth of the trees cultivated in open field was lower in comparison to the growth of the trees grown under the nets. The RED, PEARL, YELLOW and GREY nets increased the growth of the trees more than the other nets. The nets positively influenced the fruit characteristics, such as fruit weight and flesh firmness.

  8. Axial Heat Transport Mechanism due to Reciprocating Flow in a Ribbed Tube

    Science.gov (United States)

    Mochizuki, Sadanari; Murata, Akira; Saito, Hiroshi

    Experiments and numerical simulation are performed to investigate the mechanism of heat and mass transport inside a ribbed tube induced by reciprocating flow. The reciprocating flow is generated by a crank-piston device without producing a net throughflow. It is disclosed from the study that the reciprocating flow causes the generation and extinction of separation vortices behind each rib to manipulate "trap and release" mechanism of heat and mass transport in the axial direction. The transport performance thus produced inside the ribbed tube is far superior to those inside the smooth tubes or so-called dream pipes.

  9. Subaqueous eruption-fed mass-flow deposits: Records of the Ordovician arc volcanism in the northern Famatina Belt; Northwestern Argentina

    Science.gov (United States)

    Cisterna, Clara Eugenia; Coira, Beatriz

    2014-01-01

    This study is focused on the analyses of a Chaschuil section (27° 49‧ S-68° 04‧ W), north of the Argentina Famatina Belt, where Ordovician explosive-effusive arc volcanism took place under subaerial to subaqueous marine conditions. In analyzing the profile, we have recognized an Arenigian succession composed by dominant volcaniclastic lithofacies represented by volcaniclastic debris flow, turbidity current and minor resedimented syn-eruptive pyroclastic depositsand lavas. The upper portions of succession are represented by volcanogenic sedimentary lithofacies with fossiliferous levels. Great volumes of the volcaniclastic deposits are strongly controlled in their transport by mass flow processes. These representative deposits provide significant data in relation to the coeval volcanic events for recognizing a continuous explosive volcanism together a minor effusive activity and the degradation of volcanic edifices. Likewise mass flow deposits give indications of the high rate of sedimentation, strong slope control and instability episodes in the basin, typical of those volcanic environments. That substantial information was the key to understand the features and evolution of the Arenigian basin in the north of the Famatina System.

  10. MHD Heat and Mass Transfer of Chemical Reaction Fluid Flow over a Moving Vertical Plate in Presence of Heat Source with Convective Surface Boundary Condition

    Directory of Open Access Journals (Sweden)

    B. R. Rout

    2013-01-01

    Full Text Available This paper aims to investigate the influence of chemical reaction and the combined effects of internal heat generation and a convective boundary condition on the laminar boundary layer MHD heat and mass transfer flow over a moving vertical flat plate. The lower surface of the plate is in contact with a hot fluid while the stream of cold fluid flows over the upper surface with heat source and chemical reaction. The basic equations governing the flow, heat transfer, and concentration are reduced to a set of ordinary differential equations by using appropriate transformation for variables and solved numerically by Runge-Kutta fourth-order integration scheme in association with shooting method. The effects of physical parameters on the velocity, temperature, and concentration profiles are illustrated graphically. A table recording the values of skin friction, heat transfer, and mass transfer at the plate is also presented. The discussion focuses on the physical interpretation of the results as well as their comparison with previous studies which shows good agreement as a special case of the problem.

  11. Experimental investigation of the liquid volumetric mass transfer coefficient for upward gas-liquid two-phase flow in rectangular microchannels

    Directory of Open Access Journals (Sweden)

    X. Y. Ji

    2010-12-01

    Full Text Available The gas-liquid two-phase mass transfer process in microchannels is complicated due to the special dynamical characteristics. In this work, a novel method was explored to measure the liquid side volumetric mass transfer coefficient kLa. Pressure transducers were utilized to measure the pressure variation of upward gas-liquid two-phase flow in three vertical rectangular microchannels and the liquid side volumetric mass transfer coefficient kLa was calculated through the Pressure-Volume-Temperature correlation of the gas phase. Carbon dioxide-water, carbon dioxide-ethanol and carbon dioxide-n-propanol were used as working fluids, respectively. The dimensions of the microchannels were 40 µm×240 µm (depth×width, 100 µm×800 µm and 100 µm×2000 µm, respectively. Results showed that the channel diameter and the capillary number influence kLa remarkably and that the maximum value of kLa occurs in the annular flow regime. A new correlation of kLa was proposed based on the Sherwood number, Schmidt number and the capillary number. The predicted values of kLa agreed well with the experimental data.

  12. Online quench-flow electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry for elucidating kinetic and chemical enzymatic reaction mechanisms.

    Science.gov (United States)

    Clarke, David J; Stokes, Adam A; Langridge-Smith, Pat; Mackay, C Logan

    2010-03-01

    We have developed an automated quench-flow microreactor which interfaces directly to an electrospray ionization (ESI) mass spectrometer. We have used this device in conjunction with ESI Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS) to demonstrate the potential of this approach for studying the mechanistic details of enzyme reactions. For the model system chosen to test this device, namely, the pre-steady-state hydrolysis of p-nitrophenyl acetate by the enzyme chymotrypsin, the kinetic parameters obtained are in good agreement with those in the literature. To our knowledge, this is the first reported use of online quench-flow coupled with FTICR MS. Furthermore, we have exploited the power of FTICR MS to interrogate the quenched covalently bound enzyme intermediate using top-down fragmentation. The accurate mass capabilities of FTICR MS permitted the nature of the intermediate to be assigned with high confidence. Electron capture dissociation (ECD) fragmentation allowed us to locate the intermediate to a five amino acid section of the protein--which includes the known catalytic residue, Ser(195). This experimental approach, which uniquely can provide both kinetic and chemical details of enzyme mechanisms, is a potentially powerful tool for studies of enzyme catalysis.

  13. Which nets are being used: factors associated with mosquito net use in Amhara, Oromia and Southern Nations, Nationalities and Peoples' Regions of Ethiopia

    Directory of Open Access Journals (Sweden)

    Mosher Aryc W

    2011-04-01

    Full Text Available Abstract Background There has been recent large scale-up of malaria control interventions in Ethiopia where transmission is unstable. While household ownership of long-lasting insecticidal nets (LLIN has increased greatly, there are concerns about inadequate net use. This study aimed to investigate factors associated with net use at two time points, before and after mass distribution of nets. Methods Two cross sectional surveys were carried out in 2006 and 2007 in Amhara, Oromia and SNNP regions. The latter was a sub-sample of the national Malaria Indicator Survey (MIS 3R. Each survey wave used multi-stage cluster random sampling with 25 households per cluster (224 clusters with 5,730 households in Baseline 2006 and 245 clusters with 5,910 households in MIS 3R 2007. Net ownership was assessed by visual inspection while net utilization was reported as use of the net the previous night. This net level analysis was restricted to households owning at least one net of any type. Logistic regression models of association between net use and explanatory variables including net type, age, condition, cost and other household characteristics were undertaken using generalized linear latent and mixed models (GLLAMM. Results A total of 3,784 nets in 2,430 households were included in the baseline 2006 analysis while the MIS 3R 2007 analysis comprised 5,413 nets in 3,328 households. The proportion of nets used the previous night decreased from 85.1% to 56.0% between baseline 2006 and MIS 3R 2007, respectively. Factors independently associated with increased proportion of nets used were: LLIN net type (at baseline 2006; indoor residual spraying (at MIS 3R 2007; and increasing wealth index at both surveys. At both baseline 2006 and MIS 3R 2007, reduced proportion of nets used was independently associated with increasing net age, increasing damage of nets, increasing household net density, and increasing altitude (>2,000 m. Conclusion This study identified

  14. Petri net methodology for solving healthcare management issues

    Directory of Open Access Journals (Sweden)

    Khushk Abdul Rauf

    2018-01-01

    Full Text Available Various approaches of Petri nets can be achieved as system security and information flow in the healthcare recording system inside any medical or health-related business. Petri net system formal modeling is essential as well as important to track down the records and secure information inside a preformed health organization. In this paper, we mainly focused on the formal model Petri net which security mechanism is controlled by public key encryption where PN based modeling is preferred. This Petri net is a mathematical modeling to solve graphical notation for step by step processes that include choice, repetition, and circumstantial execution. Petri nets offer widely mathematical applications of discrete and continuous event execution semiotics, with an efficient mathematical analysis processing theory. We sure that our formal model will lay a solid foundation to minimize the risks and overcome the security risks in the healthcare industry.

  15. Energy and momentum analysis of the deployment dynamics of nets in space

    Science.gov (United States)

    Botta, Eleonora M.; Sharf, Inna; Misra, Arun K.

    2017-11-01

    In this paper, the deployment dynamics of nets in space is investigated through a combination of analysis and numerical simulations. The considered net is deployed by ejecting several corner masses and thanks to momentum and energy transfer from those to the innermost threads of the net. In this study, the net is modeled with a lumped-parameter approach, and assumed to be symmetrical, subject to symmetrical initial conditions, and initially slack. The work-energy and momentum conservation principles are employed to carry out centroidal analysis of the net, by conceptually partitioning the net into a system of corner masses and the net proper and applying the aforementioned principles to the corresponding centers of mass. The analysis provides bounds on the values that the velocity of the center of mass of the corner masses and the velocity of the center of mass of the net proper can individually attain, as well as relationships between these and different energy contributions. The analytical results allow to identify key parameters characterizing the deployment dynamics of nets in space, which include the ratio between the mass of the corner masses and the total mass, the initial linear momentum, and the direction of the initial velocity vectors. Numerical tools are employed to validate and interpret further the analytical observations. Comparison of deployment results with and without initial velocity of the net proper suggests that more complete and lasting deployment can be achieved if the corner masses alone are ejected. A sensitivity study is performed for the key parameters identified from the energy/momentum analysis, and the outcome establishes that more lasting deployment and safer capture (i.e., characterized by higher traveled distance) can be achieved by employing reasonably lightweight corner masses, moderate shooting angles, and low shooting velocities. A comparison with current literature on tether-nets for space debris capture confirms overall

  16. The equivalency between logic Petri workflow nets and workflow nets.

    Science.gov (United States)

    Wang, Jing; Yu, ShuXia; Du, YuYue

    2015-01-01

    Logic Petri nets (LPNs) can describe and analyze batch processing functions and passing value indeterminacy in cooperative systems. Logic Petri workflow nets (LPWNs) are proposed based on LPNs in this paper. Process mining is regarded as an important bridge between modeling and analysis of data mining and business process. Workflow nets (WF-nets) are the extension to Petri nets (PNs), and have successfully been used to process mining. Some shortcomings cannot be avoided in process mining, such as duplicate tasks, invisible tasks, and the noise of logs. The online shop in electronic commerce in this paper is modeled to prove the equivalence between LPWNs and WF-nets, and advantages of LPWNs are presented.

  17. Mars MetNet Mission Status

    Science.gov (United States)

    Harri, Ari-Matti; Aleksashkin, Sergei; Arruego, Ignacio; Schmidt, Walter; Genzer, Maria; Vazquez, Luis; Haukka, Harri

    2015-04-01

    New kind of planetary exploration mission for Mars is under development in collaboration between the Finnish Meteorological Institute (FMI), Lavochkin Association (LA), Space Research Institute (IKI) and Institutio Nacional de Tecnica Aerospacial (INTA). The Mars MetNet mission is based on a new semi-hard landing vehicle called MetNet Lander (MNL). The scientific payload of the Mars MetNet Precursor [1] mission is divided into three categories: Atmospheric instruments, Optical devices and Composition and structure devices. Each of the payload instruments will provide significant insights in to the Martian atmospheric behavior. The key technologies of the MetNet Lander have been qualified and the electrical qualification model (EQM) of the payload bay has been built and successfully tested. 1. MetNet Lander The MetNet landing vehicles are using an inflatable entry and descent system instead of rigid heat shields and parachutes as earlier semi-hard landing devices have used. This way the ratio of the payload mass to the overall mass is optimized. The landing impact will burrow the payload container into the Martian soil providing a more favorable thermal environment for the electronics and a suitable orientation of the telescopic boom with external sensors and the radio link antenna. It is planned to deploy several tens of MNLs on the Martian surface operating at least partly at the same time to allow meteorological network science. 2. Scientific Payload The payload of the two MNL precursor models includes the following instruments: Atmospheric instruments: 1. MetBaro Pressure device 2. MetHumi Humidity device 3. MetTemp Temperature sensors Optical devices: 1. PanCam Panoramic 2. MetSIS Solar irradiance sensor with OWLS optical wireless system for data transfer 3. DS Dust sensor The descent processes dynamic properties are monitored by a special 3-axis accelerometer combined with a 3-axis gyrometer. The data will be sent via auxiliary beacon antenna throughout the

  18. Automation of a mass flow controller for application in time-multiplex SF{sub 6}+CH{sub 4} plasma etching of silicon

    Energy Technology Data Exchange (ETDEWEB)

    Tezani, L.L.; Moraes, R.S.; Medeiros, H.S.; Petraconi Filho, G.; Massi, M.; Silva Sobrinho, A.S. da [Laboratorio de Plasmas e Processos, Instituto Tecnologico de Aeronautica, 12228-900, Sao Jose dos Campos-SP (Brazil); Pessoa, R.S.; Maciel, H.S. [Laboratorio de Plasmas e Processos, Instituto Tecnologico de Aeronautica, 12228-900, Sao Jose dos Campos-SP (Brazil); IP and D, Universidade do Vale do Paraiba, 12244-000, Sao Jose dos Campos-SP (Brazil); Martins, C.A. [Laboratorio de Combustao, Propulsao e Energia, Instituto Tecnologico de Aeronautica, 12228-900, Sao Jos dos Campos-SP (Brazil)

    2012-10-15

    In this work is proposed the automation of a gas injection (mass flow) system in order to generate timemultiplex SF{sub 6}/CH{sub 4} radiofrequency plasma applied for silicon (Si) etching process. The control of the gas injection system is important in order to better control the process anisotropy, i.e., the high-aspect-ratio of mask pattern transfer to substrate surface. In other words, this control allows the attainment of deep Si etching process. Here, the automation of the gas injection system was realized through the interface between a computer and a data acquisition board. The automation software developed allows controlling the gas flow rate switching it on and off during whole process through the use of a square waveform routine, intermittent flow, beyond the conventional condition of a fixed value for gas flow rate, continuous flow. In order to investigate the time-multiplex SF{sub 6}/CH{sub 4} plasma etching of Si, the residual gas analysis was performed. The investigations were made keeping the following process parameters: flow of SF{sub 6}: 10 sccm, flow of CH{sub 4}: 6 sccm, 100 W rf power, wave period: 20 sec. It were monitored the partial pressure of SF{sup +} {sub 5} (parent neutral specie: SF{sub 6}), CH{sup +}{sub 4} (CH4) and SiF+{sub 3} (SiF4) species as a function of time for different gas flow switching and duty cycle. The results showed that with the generation of plasma occurs a drastic change in behavior of partial pressures of SF{sup +} {sub 5} and CH{sup +}{sub 4} species. Moreover, it is evidenced that the interactions between the SF{sub 6} and CH{sub 4} fragments promotes a high production rate of HF molecule and consequently a decrease of atomic fluorine, mainly when plasma is on. Finally, the behavior of partial pressure of SiF{sup +} {sub 3} specie for alternatively intermittent SF{sub 6} and CH{sub 4} flow operation shows us that both the etching processes and the deposition of a polymer passivation layer are occurring

  19. In situ flow cell for combined X-ray absorption spectroscopy, X-ray diffraction, and mass spectrometry at high photon energies under solar thermochemical looping conditions

    Science.gov (United States)

    Rothensteiner, Matthäus; Jenni, Joel; Emerich, Hermann; Bonk, Alexander; Vogt, Ulrich F.; van Bokhoven, Jeroen A.

    2017-08-01

    An in situ/operando flow cell for transmission mode X-ray absorption spectroscopy (XAS), X-ray diffraction (XRD), and combined XAS/XRD measurements in a single experiment under the extreme conditions of two-step solar thermochemical looping for the dissociation of water and/or carbon dioxide was developed. The apparatus exposes materials to relevant conditions of both the auto-reduction and the oxidation sub-steps of the thermochemical cycle at ambient temperature up to 1773 K and enables determination of the composition of the effluent gases by online quadrupole mass spectrometry. The cell is based on a tube-in-tube design and is heated by means of a focusing infrared furnace. It was tested successfully for carbon dioxide splitting. In combined XAS/XRD experiments with an unfocused beam, XAS measurements were performed at the Ce K edge (40.4 keV) and XRD measurements at 64.8 keV and 55.9 keV. Furthermore, XRD measurements with a focused beam at 41.5 keV were carried out. Equimolar ceria-hafnia was auto-reduced in a flow of argon and chemically reduced in a flow of hydrogen/helium. Under reducing conditions, all cerium(iv) was converted to cerium(iii) and a cation-ordered pyrochlore-type structure was formed, which was not stable upon oxidation in a flow of carbon dioxide.

  20. Impact of generalized Fourier's and Fick's laws on MHD 3D second grade nanofluid flow with variable thermal conductivity and convective heat and mass conditions

    Science.gov (United States)

    Ramzan, M.; Bilal, M.; Chung, Jae Dong; Lu, Dian Chen; Farooq, Umer

    2017-09-01

    A mathematical model has been established to study the magnetohydrodynamic second grade nanofluid flow past a bidirectional stretched surface. The flow is induced by Cattaneo-Christov thermal and concentration diffusion fluxes. Novel characteristics of Brownian motion and thermophoresis are accompanied by temperature dependent thermal conductivity and convective heat and mass boundary conditions. Apposite transformations are betrothed to transform a system of nonlinear partial differential equations to nonlinear ordinary differential equations. Analytic solutions of the obtained nonlinear system are obtained via a convergent method. Graphs are plotted to examine how velocity, temperature, and concentration distributions are affected by varied physical involved parameters. Effects of skin friction coefficients along the x- and y-direction versus various parameters are also shown through graphs and are well debated. Our findings show that velocities along both the x and y axes exhibit a decreasing trend for the Hartmann number. Moreover, temperature and concentration distributions are decreasing functions of thermal and concentration relaxation parameters.