A novel approach to improving resistance to dezincification of diphasic brass

Energy Technology Data Exchange (ETDEWEB)

Hung, Chang-Yu; Lin, Chi-Ming; Hsieh, Chih-Chun; Li, Chia-Chun; Wu, Paxon Ti-Yuan; Chen, Kuan-Ting; Wu, Weite, E-mail: wwu@dragon.nchu.edu.tw

2016-06-25

Dezincification-resistant brasses have been developed and refined for nearly 100 years, and lead (Pb) doped brass fittings have played a large role in the transport of potable water. However, due to Pb toxicity, restrictions have been placed on the amount of Pb that can be added to brass, and in general there is no safe level of Pb. In this study, 0.02 wt.% addition of Niobium (Nb) to diphasic brass (also know as duplex brass) was found to significantly improve resistance to dezincification when compared with a 0.20 wt.% doping level of Pb. Nb prevents dezincification in two ways: by alloying with β-phase to suppress the preferential dissolution of Zn and by forming a passivation layer incorporated with Nb that serves as a barrier against chloride ions in CuCl{sub 2} solution. As a result, it is expected that a Nb-doped diphasic brass will not negatively impact industrial application of duplex brass. - Highlights: • Nb doped diphasic brass improves resistance to dezincification. • Nb-doped diphasic prevents dezincification by alloying with β-phase. • Forming a passivation layer incorporated with Nb.

Metallurgical characterization of brass objects from the Akko 1 shipwreck, Israel

International Nuclear Information System (INIS)

Ashkenazi, D.; Cvikel, D.; Stern, A.; Klein, S.; Kahanov, Y.

2014-01-01

The Akko 1 shipwreck was a small Egyptian armed vessel or auxiliary naval brig built in the eastern Mediterranean at the beginning of the 19th century. During the underwater excavations, about 230 brass hook-and-eye closures were found, mainly in the bow area. In addition, 158 brass cases were found, mainly between midships and the aft extremity of the shipwreck. Metallurgical non-destructive and destructive characterizations of selected items were performed, including radiographic testing, XRF, lead isotope analysis, optical microscopy, SEM–EDS and microhardness tests. The hook-and-eye closures and the cases were both found to be made of binary copper–zinc alloy (about 30 wt.% zinc). While the brass cases were made from rolled sheets, hand-made using simple tools, and joined by tin–lead soldering material, the brass hook-and-eye closures were hand-made from drawn brass wire, and manufactured from commercial drawn brass bars by a cold-working process. The lead isotope analyses suggest different provenances of the raw materials used for making the brass objects, thus the different origins of the ores may hint that the brass wire and sheet were imported to the workshops in which the objects were manufactured. - Highlights: • Brass cases and hook-and-eye closures were retrieved from the Akko 1 shipwreck. • Both types of objects were made of binary copper–zinc alloy (about 30 wt.% zinc). • The cases were hand-made from rolled sheets and joined by tin–lead soldering. • Hook-and-eye closures were made from drawn brass wire manufactured by cold-working. • Lead isotope analyses suggest that the origins of the raw material were diverse

A numerical approach to Stefan problem

International Nuclear Information System (INIS)

Kotalik, P.

1993-07-01

The one-dimensional Stefan problem for a thin plate heated by laser pulses is solved by approximating the enthalpy formulation of the problem by C 0 piecewise linear finite elements in space combined with a semi-implicit scheme in time. (author) 6 figs., 5 refs

Colonel Stefan Ilieff [In Bulgarian

Directory of Open Access Journals (Sweden)

V. Dimov

2013-06-01

Full Text Available On 26 March 1917 colonel Stefan Ilieff, a commander of the 15th Infantry Lom regiment (Belogradchik, was killed on the battlefield at Pelister, near Bitolja (Macedonia. The text of V. Dimov, a war correspondent at the 6th Infantry Bdin division, was published in the magazine “Otechestvo” (Homeland, Volume 4, Number 45, 11 November 1917.

Wettability transition of laser textured brass surfaces inside different mediums

Science.gov (United States)

Yan, Huangping; Abdul Rashid, Mohamed Raiz B.; Khew, Si Ying; Li, Fengping; Hong, Minghui

2018-01-01

Hydrophobic surface on brass has attracted intensive attention owing to its importance in scientific research and practical applications. Laser texturing provides a simple and promising method to achieve it. Reducing wettability transition time from hydrophilicity to hydrophobicity or superhydrophobicity remains a challenge. Herein, wettability transition of brass surfaces with hybrid micro/nano-structures fabricated by laser texturing was investigated by immersing the samples inside different mediums. Scanning electron microscopy, energy-dispersive X-ray analysis, X-ray photoelectron spectroscopy and surface contact angle measurement were employed to characterize surface morphology, chemical composition and wettability of the fabricated surfaces of brass samples. Wettability transition time from hydrophilicity to hydrophobicity was shortened by immersion into isopropyl alcohol for a period of 3 h as a result of the absorption and accumulation of organic substances on the textured brass surface. When the textured brass sample was immersed into sodium bicarbonate solution, flower-like structures on the sample surface played a key role in slowing down wettability transition. Moreover, it had the smallest steady state contact angle as compared to the others. This study provides a facile method to construct textured surfaces with tunable wetting behaviors and effectively extend the industrial applications of brass.

Study unique artistic lopburi province for design brass tea set of bantahkrayang community

Science.gov (United States)

Pliansiri, V.; Seviset, S.

2017-07-01

The objectives of this study were as follows: 1) to study the production process of handcrafted Brass Tea Set; and 2) to design and develop the handcrafted of Brass Tea Set. The process of design was started by mutual analytical processes and conceptual framework for product design, Quality Function Deployment, Theory of Inventive Problem Solving, Principles of Craft Design, and Principle of Reverse Engineering. The experts in field of both Industrial Product Design and Brass Handicraft Product, have evaluated the Brass Tea Set design and created prototype of Brass tea set by the sample of consumers who have ever bought the Brass Tea Set of Bantahkrayang Community on this research. The statistics methods used were percentage, mean ({{{\\overline X}} = }) and standard deviation (S.D.) 3. To assess consumer satisfaction toward of handcrafted Brass tea set was at the high level.

Mechanistic study of the rubber-brass adhesion interphase

Science.gov (United States)

Ashirgade, Akshay

Brass-plated steel tire cords form an essential strengthening component of a radial automobile tire. Adhesion between rubber compound and brass-plated steel tire cord is crucial in governing the overall performance of tires. The rubber-brass interfacial adhesion is influenced by the chemical composition and thickness of the interfacial layer. It has been shown that the interfacial layer consists mainly of sulfides and oxides of copper and zinc. This thesis discusses the effect of changes in the chemical composition and the structure of the interfacial layers due to addition of adhesion promoter resins. Grazing incidence X-Ray Diffraction (GIXRD) experiments were run on sulfidized polished brass coupons previously bonded to six experimental rubber compounds. It was confirmed that heat and humidity conditions lead to physical and chemical changes of the rubber-steel tire cord interfacial layer, closely related to the degree of rubber-brass adhesion. Morphological transformation of the interfacial layer led to loss of adhesion after aging. The adhesion promoter resins inhibit unfavorable morphological changes in the interfacial layer thus stabilizing it during aging and prolonging failure. Tire cord adhesion tests illustrated that the one-component resins improved adhesion after aging using a rubber compound with lower cobalt loading. Based on the acquired diffraction profiles, these resins were also found to impede crystallization of the sulfide layer after aging leading to improved adhesion. Secondary Ion Mass Spectrometry (SIMS) depth profiles, SEM micrographs and AFM images strongly corroborated the findings from GIXRD. FTIR was utilized in a novel way to understand the degradation mechanism due to aging. A model for rubber and interfacial layer degradation is proposed to illustrate the effect of aging and the one-component resins. This interfacial analysis adds valuable new information to our understanding of the complex nature of the rubber-brass bonding

Physiology and prospects of bimanual tracheoesophageal brass instrument play

NARCIS (Netherlands)

Hilgers, F. J. M.; Dirven, R.; Jacobi, I.; van den Brekel, M. W. M.

2015-01-01

This study investigated whether trachea pressures during brass instrument play of laryngectomised patients are within the range of those measured during tracheoesophageal voicing, and whether application of an automatic speaking valve can 'free' both hands to play a brass instrument. Objective

Physiology and prospects of bimanual tracheoesophageal brass instrument play

NARCIS (Netherlands)

Hilgers, F.J.M.; Dirven, R.; Jacobi, I.; van den Brekel, M.W.M.

2015-01-01

This study investigated whether trachea pressures during brass instrument play of laryngectomised patients are within the range of those measured during tracheoesophageal voicing, and whether application of an automatic speaking valve can ‘free’ both hands to play a brass instrument. Objective

X-ray fluorescence analysis of ancient and medieval brass artifacts from south Moravia

International Nuclear Information System (INIS)

Hložek, M.; Komoróczy, B.; Trojek, T.

2012-01-01

This paper deals with an investigation of archeological finds using X-ray fluorescence analysis and microanalysis. The main aim of the investigation was to prove the production of brass in the South Moravian Region (part of the Czech Republic) in former times. The probable brass production technology is described. Various objects dating back to Antiquity and to the Middle Ages were investigated using two X-ray fluorescence systems, and the results of the analyses are discussed. The measurements showed, e.g., that fragments of Roman scale armor and a belt fitting dating back to Antiquity were made of brass. Brass was also identified on the surfaces of various ancient and medieval molds and melting pots. - Highlights: ► Semiquantitative X-ray fluorescence analysis of archeological finds. ► Two different gilding techniques of a brass belt terminal found in Brno. ► Use of brass before the Great Moravian period. ► Evidence of brass casting in the 12th century in Brno.

Generalized Stefan-Boltzmann Law

Science.gov (United States)

Montambaux, Gilles

2018-03-01

We reconsider the thermodynamic derivation by L. Boltzmann of the Stefan law and we generalize it for various different physical systems whose chemical potential vanishes. Being only based on classical arguments, therefore independent of the quantum statistics, this derivation applies as well to the saturated Bose gas in various geometries as to "compensated" Fermi gas near a neutrality point, such as a gas of Weyl Fermions. It unifies in the same framework the thermodynamics of many different bosonic or fermionic non-interacting gases which were until now described in completely different contexts.

STAGNATION TIME, COMPOSITION, PH, AND ORTHOPHOSPHATE EFFECTS ON METAL LEACHING FROM BRASS

Science.gov (United States)

Plumbing products made of brass and similar alloys are the only lead containing materials still installed in drinking water systems and, by law, may contain up to 8% lead. Brass ranges in metal composition depending on its application. Brass is composed of approximately 60 to 80%...

Localization of the solution of a one-dimensional one-phase Stefan problem

OpenAIRE

Cortazar, C.; Elgueta, M.; Primicerio, M.

1996-01-01

Studiamo la localizzazione, l'insieme dei punti di blow up ed alcuni aspetti della velocità di propagazione della frontiera libera di soluzioni di un problema di Stefan unidimensionale ad una fase. We study localization, the set of blow up points and some aspects of the speed of the free boundary of solutions of a one-dimensional, one-phase Stefan problem.

A comparison of fingerprint sweat corrosion of different alloys of brass.

Science.gov (United States)

Sykes, Stephanie; Bond, John W

2013-01-01

Fingerprint sweat from 40 donors was deposited onto samples of five α and α + β phase brasses, comprising five alloys with different copper and zinc concentrations, two of which also had the addition of small concentrations of lead. Visual grading of the visibility of the corrosion revealed that brasses with the least amount of zinc produced the most visible and fully formed fingerprints from the most donors. Consideration of previously reported mechanisms for the corrosion of brass suggests red copper (I) oxide as a likely corrosion product for low zinc brasses, and a consideration of the color, composition, and solubility of fingerprint sweat corrosion products suggests that copper (I) oxide produces good contrast and visibility with the brass substrate. Scanning electron microscope images of the corrosion of all five alloys confirmed the enhanced contrast between corroded and uncorroded areas for low zinc alloys. © 2012 American Academy of Forensic Sciences.

X-ray fluorescence analysis of ancient and medieval brass artifacts from south Moravia

Energy Technology Data Exchange (ETDEWEB)

Hlozek, M. [Methodical Centre of Conservation-Technical Museum in Brno, Purkynova 105, 612 00 Brno (Czech Republic); Komoroczy, B. [Institute of Archeology of the Academy of Science of the Czech Republic, Kralovopolska 147, 612 00 Brno (Czech Republic); Trojek, T., E-mail: tomas.trojek@fjfi.cvut.cz [Department of Dosimetry and Application of Ionizing Radiation, Czech Technical University in Prague, Brehova 7, 115 19 Praha 1 (Czech Republic)

2012-07-15

This paper deals with an investigation of archeological finds using X-ray fluorescence analysis and microanalysis. The main aim of the investigation was to prove the production of brass in the South Moravian Region (part of the Czech Republic) in former times. The probable brass production technology is described. Various objects dating back to Antiquity and to the Middle Ages were investigated using two X-ray fluorescence systems, and the results of the analyses are discussed. The measurements showed, e.g., that fragments of Roman scale armor and a belt fitting dating back to Antiquity were made of brass. Brass was also identified on the surfaces of various ancient and medieval molds and melting pots. - Highlights: Black-Right-Pointing-Pointer Semiquantitative X-ray fluorescence analysis of archeological finds. Black-Right-Pointing-Pointer Two different gilding techniques of a brass belt terminal found in Brno. Black-Right-Pointing-Pointer Use of brass before the Great Moravian period. Black-Right-Pointing-Pointer Evidence of brass casting in the 12th century in Brno.

Structural Transformations Versus Hard Particles Motion in the Brass Ingots

Directory of Open Access Journals (Sweden)

Wołczyński W.

2017-12-01

Full Text Available A mathematical method for the forecast of the type of structure in the steel static ingot has been recently developed. Currently, the method has been applied to structural zones prediction in the brass ingots obtained by the continuous casting. Both the temperature field and thermal gradient field have been calculated in order to predict mathematically the existence of some structural zones in the solidifying brass ingot. Particularly, the velocity of the liquidus isotherm movement and thermal gradient behavior versus solidification time have been considered. The analysis of the mentioned velocity allows the conclusion that the brass ingots can evince: chilled columnar grains-, (CC, fine columnar grains-, (FC, columnar grains-, (C, equiaxed grains zone, (E, and even the single crystal, (SC, situated axially. The role of the mentioned morphologies is analyzed to decide whether the hard particles existing in the brass ingots can be swallowed or rejected by the solid / liquid (s/l interface of a given type of the growing grains. It is suggested that the columnar grains push the hard particles to the end of a brass ingot during its continuous casting.

Structural evolution and mechanisms of fatigue in polycrystalline brass

International Nuclear Information System (INIS)

Vejloe Carstensen, J.

1998-03-01

The plastic strain controlled fatigue behaviour of polycrystalline Cu-15%Zn and Cu-30%Zn has been investigated with the aim of studying the effect of slip mode modification by the addition of zinc to copper. It has been clearly demonstrated, that true cyclic saturation does not occur in the plastic strain controlled fatigue of brass. This complicates the contstruction of a cyclic stress-strain (CSS) curve and thus the comparison with copper. A method to overcome this complication has been suggested. Surface observations on fatigued brass specimens show that individual grains tend to deform by Sachs type single slip. This behaviour has been described by the self-consistent Sachs-Eshelby model, which provides estimates of the CSS curve for brass polycrystals. Successive stages of primary hardening, softening and secondary hardening has been observed in the plastic strain controlled fatigue of brass. It has been found that the primary hardening is attributed to an increase of intergranular stresses whereas the secondary hardening apparently is attributed to an increase of friction stresses. Investigations of the structural evolution show that the softening behaviour can be explained by the presence of short-range order (SRO). SRO promote the formation of extended dipole arrays which hardens the material. The formation of intense shear bands destroy the dipole arrays, which explains the cyclic softening. The present results reveal that Cu-30%Zn in a pure planar slip alloy, while Cu-15%Zn displays both planar and wavy slip. The mechanical and structural behaviour observed in brass resembles recent observations in 316L austenitic stainless steels, and the present results reveal that Cu-30%Zn and 316L have approximately the same fatigue life curve. This emphasizes brass as being a convenient model system for the industrially important austenitic steels. (au)

Corrosion inhibition of brass by aliphatic amines

International Nuclear Information System (INIS)

Taha, K. K.; Sheshadri, B. S; Ahmed, M. F.

2005-01-01

Aliphatic amines hexylamine (HCA), octylamine (OCA) and decylamine (DCA) have been used as corrosion inhibitors for (70/30) brass in 0.I M HCIO 4 . The inhibitor efficiency (%P) calculated using weight loss, Tafel extrapolation, linear polarization and impedance methods was found to be in the order DCA> OCA> HCA. These adsorb on brass surface following bockris-swinkels' isotherm. DCA, OCA and HCA displaced 4, 3 and 2 molecules of water from interface respectively. Displacement of water molecules brought a great reorganization of double layer at the interface. These amines during corrosion form complexes with dissolved zinc and copper ions.(Author)

The Paramagnetism of Dissolved Mn in {alpha} and {beta} Brasses

Energy Technology Data Exchange (ETDEWEB)

Myers, H P; Westin, R

1962-12-15

Paramagnetic susceptibility measurements have been made on {alpha} and {beta} brasses containing {approx} 1 w/o Mn. The susceptibility varied with temperature according to the Curie Weiss law and the Curie constant and thereby the Bohr magneton number per Mn atom were determined. Interpreted in terms of valency, Mn monovalent in copper has a valency in {alpha} brass which decreases progressively with zinc content attaining the value 0.58 at the limiting of composition. Mn in {beta} brass exhibits a valency 0.8. These results are not in keeping with previous values for the valency of manganese as determined from phase boundary relationships and electron to atom ratios.

Experimental investigation on carbon nano tubes coated brass rectangular extended surfaces

International Nuclear Information System (INIS)

Senthilkumar, Rajendran; Prabhu, Sethuramalingam; Cheralathan, Marimuthu

2013-01-01

Finned surface has been extensively used for free convection cooling of internal combustion engines and several electronic kits etc. Here rectangular brass fin was preferred for analysis. Thermocouples were attached all over the surface of the fin in equal distances. The measurement of surface temperature and calculated convective heat transfer rate were reported for several heat input values. The overall system performance can be improved by enhancing heat transfer rate of extended surfaces. Based on the above requirement, brass surface was coated by carbon nano tubes. The temperature and heat transfer characteristics were investigated using Taguchi method for experimental design. Finally the performances of coated and non-coated rectangular brass fins were compared. The average percentage of increase in heat transfer rate was proved around 12% for carbon nanocoated rectangular brass fins. - Graphical abstract: The designed Natural and Forced convection Heat Transfer Test Rig measures the enhanced rate of heat transfer for nano coated rectangular fins than in non-coated fins. Highlights: ► Rectangular brass fins were preferred for convective heat transfer process. ► The rectangular brass fins are coated with multi wall carbon nano tubes in EBPVD process with nanometer thickness. ► Temperature and heat transfer rate were investigated for nanocoated and non-coated fins by using Taguchi method. ► Multi wall carbon nanotubes act as a pin fin to enhance surface area for effective convective heat transfer rate.

Laser Brazing Characteristics of Al to Brass with Zn-Based Filler

Science.gov (United States)

Tan, Caiwang; Liu, Fuyun; Sun, Yiming; Chen, Bo; Song, Xiaoguo; Li, Liqun; Zhao, Hongyun; Feng, Jicai

2018-05-01

Laser brazing of Al to brass in lap configuration with Zn-based filler was performed in this work. The process parameters including laser power, defocused distance were found to have a significant influence on appearance, microstructure and mechanical properties. The process parameters were optimized to be laser power of 2700 W and defocusing distance of + 40 mm from brass surface. In addition, preheating exerted great influence on wetting and spreading ability of Zn filler on brass surface. The microstructure observation showed the thickness of reaction layer (CuZn phase) at the interface of the brass side would grow with the increase in laser power and the decrease in the laser defocusing distance. Moreover, preheating could increase the spreading area of the filler metal and induced the growth of the reaction layer. The highest tensile-shear load of the joint could reach 2100 N, which was 80% of that of Al alloy base metal. All the joints fractured along the CuZn reaction layer and brass interface. The fracture morphology displayed the characteristics of the cleavage fracture when without preheating before welding, while it displayed the characteristics of the quasi-cleavage fracture with preheating before welding.

Structural evolution and mechanisms of fatigue in polycrystalline brass

Energy Technology Data Exchange (ETDEWEB)

Vejloe Carstensen, J

1998-03-01

The plastic strain controlled fatigue behaviour of polycrystalline Cu-15%Zn and Cu-30%Zn has been investigated with the aim of studying the effect of slip mode modification by the addition of zinc to copper. It has been clearly demonstrated, that true cyclic saturation does not occur in the plastic strain controlled fatigue of brass. This complicates the contstruction of a cyclic stress-strain (CSS) curve and thus the comparison with copper. A method to overcome this complication has been suggested. Surface observations on fatigued brass specimens show that individual grains tend to deform by Sachs type single slip. This behaviour has been described by the self-consistent Sachs-Eshelby model, which provides estimates of the CSS curve for brass polycrystals. Successive stages of primary hardening, softening and secondary hardening has been observed in the plastic strain controlled fatigue of brass. It has been found that the primary hardening is attributed to an increase of intergranular stresses whereas the secondary hardening apparently is attributed to an increase of friction stresses. Investigations of the structural evolution show that the softening behaviour can be explained by the presence of short-range order (SRO). SRO promote the formation of extended dipole arrays which hardens the material. The formation of intense shear bands destroy the dipole arrays, which explains the cyclic softening. The present results reveal that Cu-30%Zn in a pure planar slip alloy, while Cu-15%Zn displays both planar and wavy slip. The mechanical and structural behaviour observed in brass resembles recent observations in 316L austenitic stainless steels, and the present results reveal that Cu-30%Zn and 316L have approximately the same fatigue life curve. This emphasizes brass as being a convenient model system for the industrially important austenitic steels. (au) 9 tabs., 94 ills., 177 refs.; The thesis is also available as DCAMM-R-S80 and as an electronic document on http://www.risoe.dk/rispubl

Identification of force constants in β-brass

DEFF Research Database (Denmark)

Norvell, J. C.; Als-Nielsen, Jens Aage

1969-01-01

The phonon dispersion curves of β-brass have previously been measured by Gilat and Dolling and a fit was obtained to a Born-von Kármán model with forces extending to the fourth nearest neighbours. Although a factor of 10 was found between the second-nearest-neighbour Cu-Cu and Zn-Zn force constants......, the data did not allow an identification of these constants. By comparisons of neutron group intensities from two β-brass crystals, one with normal Cu and the other isotopically enriched with 65Cu, we are able to identify conclusively these force constants: αZn-Zn2nd similar, equals 10αCu-Cu2nd....

Were king Stefan the First-Crowned and his son Radoslav co-rulers?

Directory of Open Access Journals (Sweden)

Bubalo Đorđe

2009-01-01

Full Text Available The Serbian historiography considers the issue of the co-ruling of King Stefan the First-Crowned and his son Radoslav as the one finally resolved. The suggested solution on the co-rule of Stefan and Radoslav may be most succinctly expressed as following: as early as in the year of 1220, due to the frail health of Stefan the First-Crowned and Radoslav's marriage to Anne the Epirus princess, Radoslav was crowned to be the king and positioned to co-rule with his father after the Byzantine model of governing. Nevertheless this point of view has some loose ends. The notion of co-ruling and the very term of 'co-ruler' are quite freely used in the scholarly works. A general consensus on the precise meaning has not been reached yet. At the point where one author perceives a co-rule, the other categorically denies it. Basically the approach equalizing the heir to the throne and the co-ruler is wrong. Although the co-rulers in most cases were the throne heirs, they cannot be called the co-rulers because of the right to inherit the throne, but for the ruling attributes that formally established that right. The conviction of the co-rule of King Stefan and his son Radoslav is founded on the interpretation of the facts coming from the following sources: entitling charters for the monastery of Žiča, produced by Stefan and Radoslav around 1220; some segments from St. Sava's biographies by Domentian and Theodosius describing the circumstances of Stefan's death-bed leaving the throne to Radoslav; the three acts of the town of Kotor from 1221 and 1227 dated by the rule of king Radoslav, the portraits of Stefan and Radoslav next to the entrance to the Church of the Ascension in the monastery of Žiča and in the nartex of the Mileševa monastery church. In the first Žiča charter, Stefan calls Radoslav his heir, while in the second Žiča charter Stefan points out Radoslav as his first-born son blessed by him to be the king of the whole state. (jegože i

Methods to improve the PVD coatability of brass by using diffusion barriers

Science.gov (United States)

Langer, Bernd

Previous work involving PVD coatings on brass has used a combination of multilayers consisting of electroplated films like nickel or chromium and deposited decorative PVD coatings like TiN, TiAIN or ZrN systems. The disadvantages of these systems are the combination of wet electrochemistry and high tech vacuum processes. Furthermore the allergic reaction to nickel and the toxic nature of Cr(VI) must be considered.There is a need for intermediate layers to 'seal-off the brass in order to avoid the evaporation of zinc in vacuum using a diffusion barrier. Furthermore the intermediate layers are required to act as a corrosion barrier.This thesis reports on the development of PVD coatings on heat sensitive brass substrate materials utilising ABS technology with Al, CuAl8 and Nb targets as vapour sources.The brass pretreatment includes careful grinding, polishing and cleaning steps as well as steered arc metal ion etching using the above target materials. The coatings are produced at temperatures between 100 and 250°C in the unbalanced magnetron mode, including layers made from Al, Al-Nb, CuA18, CuAl8-Nb and Nb.Scratch adhesion and Rockwell indentation tests are found not to be directly applicable to the system of soft brass and ductile coating(s). Therefore a new classification for both scratch and indentation tests was defined. The best adhesion was shown by the CuA18 coatings on brass. Corrosion tests showed good results for the Al coatings and poor results for the pure Nb coatings directly applied on brass. The best corrosion result was obtained with a CuAl8-Nb layer system. This layer system also offers very good barrier behaviour concerning Zn diffusion.Other investigations like Glow Discharge Optical Emission Spectroscopy (GDOES), Scanning Electron Microscopy (SEM) imaging, Transmission Electron Microscopy (TEM) and X-ray Diffraction (XRD) were undertaken to characterise the new coating systems for brass.

Potential of Brass to Remove Inorganic Hg(II) from Aqueous Solution through Amalgamation.

Science.gov (United States)

Wenke, Axel; Bollen, Anne; Richard, Jan-Helge; Biester, Harald

2016-06-01

Brass shavings (CuZn45) were tested for their efficiency to remove Hg(II) from contaminated groundwater through amalgamation. The study was focused on long-term retention efficiency, the understanding of the amalgamation process and kinetics, and influences of filter surface alteration. Column tests were performed with brass filters (thickness 3 to 9 cm) flushed with 1000 μg/L Hg solution for 8 hours under different flow rates (300 to 600 mL/h). Brass filters consistently removed >98% of Hg from solution independent of filter thickness and flow rate. In a long-term experiment (filter thickness 2 cm), Hg retention decreased from 96 to 92% within 2000 hours. Batch and column experiments for studying kinetics of Hg removal indicate ~100% Hg removal from solution within only 2 hours. Solid-phase mercury thermo-desorption analysis revealed that Hg(0) diffusion into the brass surface controls kinetics of mercury retention. Brass surface alteration could be observed, but did not influence Hg retention.

Experimenting with Brass Musical Instruments.

Science.gov (United States)

LoPresto, Michael C.

2003-01-01

Describes experiments to address the properties of brass musical instruments that can be used to demonstrate sound in any level physics course. The experiments demonstrate in a quantitative fashion the effects of the mouthpiece and bell on the frequencies of sound waves and thus the musical pitches produced. (Author/NB)

Structure Analysis and Properties of Unleaded Brasses

Directory of Open Access Journals (Sweden)

Rzadkosz S.

2015-04-01

Full Text Available The analysis of brasses regarding their microstructure, mechanical properties and ecological characteristics has been presented. The influence of characteristic alloying elements contained in the brasses and the possibilities of replacing them with other elements have been assessed. The paper contains the results of studies on the influence of chosen additional elements shaping the structure and properties of unleaded alloys based on Cu-Zn system as the matrix. The research aimed at determining the mechanism and the intensity of influence of such additives as tellurium and bismuth. The microstructures were investigated with the help of light microscopy and scanning electron microscopy with X-ray microanalysis (SEM-EDS for determining significant changes of the properties.

Copper and brass aged at open circuit potential in slightly alkaline solutions

International Nuclear Information System (INIS)

Procaccini, R.; Vazquez, M.; Cere, S.

2009-01-01

Surface oxide films were grown on 99.99% copper and brass (copper-zinc alloy, Cu77Zn21Al2) in 0.1 mol L -1 borax solution at open circuit potential and were characterized using various experimental techniques. The composition of the passive films formed in situ on the different materials was studied using differential reflectance spectroscopy. The thickness of the oxide layers on copper and brass was compared by chronopotentiometric curves and potentiodynamic reductions. The electrical properties of each oxide were analyzed by means of electrochemical impedance spectroscopy. Their influence on the oxygen reduction reaction was also investigated using voltammetry hydrodynamic tools such as the rotating disk electrode. The results show that the incorporation of Zn to Cu in brass changes the composition and the thickness of the surface film. The films grown on brass tend to be thicker but less resistive and Zn compounds incorporate to the film. This is supported by results from reflectance and impedance spectroscopy. The kinetics of oxygen reduction is strongly inhibited on oxidized electrodes, particularly in the case of brass. The global number of exchanged electrons remains close to four and seems to be independent of the presence of surface oxides.

Transient Stefan flow and thermophoresis around an evaporating droplet

International Nuclear Information System (INIS)

Vittori, O.

1984-01-01

The particle scavening efficiency of vapour-grown ice crystals falling from mixed clouds proves to be very high. Stefan flow, an aerodynamic flow originating in the fluid surrounding evaporating or condensing bodies, pushes airborne particles away from the surface of the supercooled droplets evaporating in the vicinity of an ice crystal. The particle Brownian flux towards the surface of the ice crystal (terminal velocity of about 1 m s -1 ) is, therefore, enhanced. However, the efficiency of this process of airborne-particle removal is strongly reduced as a consequence of the cooling of the evaporating droplet which produces a ''thermal force'', thermophoresis, which counteracts the particle Stefan flow. At the surface of an evaporating droplet in a quasi-equilibrium state, the two airborne-particle velocity fields practically balance each other. This counteracting effect on particle motion needs to be evaluated in the transient case. An approach is presented which consists of reformulating the transient heat and mass transfer problem in such a way as to convert it into a purely heat transfer problem having a known analytical solution. The approach is discussed and found to be correct. The results of the computations show that the counteracting role of thermophoresis on Stefan-flow particle motion during the residence time of supercooled droplets in the vicinity of an ice crystal (from 10 -5 to 10 -4 s), which is also the time in which evaporation takes place, is considerably weak. It turns out to be practically negligible for large droplets (radius >= 8x10 -4 cm)

Diffusion phenomenon at the interface of Cu-brass under a strong gravitational field

Energy Technology Data Exchange (ETDEWEB)

Ogata, Yudai; Tokuda, Makoto; Januszko, Kamila; Khandaker, Jahirul Islam; Mashimo, Tsutomu, E-mail: mashimo@gpo.kumamoto-u.ac.jp [Institute of Pulsed Power Science, Kumamoto University, Kumamoto 860-8555 (Japan); Iguchi, Yusuke [Department of Solid State Physics, Debrecen University, 4032 Debrecen (Hungary); Ono, Masao [Advanced Science Research Center, Japan Atomic Energy Agency (JAEA), Ibaraki 319-1195 (Japan)

2015-03-28

To investigate diffusion phenomenon at the interface between Cu and brass under a strong gravitational field generated by ultracentrifuge apparatus, we performed gravity experiments on samples prepared by electroplating with interfaces normal and parallel to the direction of gravity. For the parallel-mode sample, for which sedimentation cannot occur thorough the interface, the concentration change was significant within the lower gravity region; many pores were observed in this region. Many vacancies arising from crystal strain due to the strong gravitational field moved into the lower gravity region, and enhanced the atoms mobilities. For the two normal-mode samples, which have interface normal to the direction of gravity, the composition gradient of the brass-on-Cu sample was steeper than that for Cu-on-brass. This showed that the atoms of denser Cu diffuse in the direction of gravity, whereas Zn atoms diffuse in the opposite direction by sedimentation. The interdiffusion coefficients became higher in the Cu-on-brass sample, and became lower in the brass-on-Cu sample. This rise may be related to the behavior of the vacancies.

Approximate Analytic Solutions for the Two-Phase Stefan Problem Using the Adomian Decomposition Method

Directory of Open Access Journals (Sweden)

Xiao-Ying Qin

2014-01-01

Full Text Available An Adomian decomposition method (ADM is applied to solve a two-phase Stefan problem that describes the pure metal solidification process. In contrast to traditional analytical methods, ADM avoids complex mathematical derivations and does not require coordinate transformation for elimination of the unknown moving boundary. Based on polynomial approximations for some known and unknown boundary functions, approximate analytic solutions for the model with undetermined coefficients are obtained using ADM. Substitution of these expressions into other equations and boundary conditions of the model generates some function identities with the undetermined coefficients. By determining these coefficients, approximate analytic solutions for the model are obtained. A concrete example of the solution shows that this method can easily be implemented in MATLAB and has a fast convergence rate. This is an efficient method for finding approximate analytic solutions for the Stefan and the inverse Stefan problems.

Temperature Dependence of Short-Range Order in β-Brass

DEFF Research Database (Denmark)

Dietrich, O.W.; Als-Nielsen, Jens Aage

1967-01-01

Critical scattering of neutrons around the superlattice reflections (1, 0, 0) and (1, 1, 1) from a single crystal of beta-brass has been measured at temperatures from 2 to 25deg C above the transition temperature. The temperature dependence of the critical peak intensity, proportional to the susc......Critical scattering of neutrons around the superlattice reflections (1, 0, 0) and (1, 1, 1) from a single crystal of beta-brass has been measured at temperatures from 2 to 25deg C above the transition temperature. The temperature dependence of the critical peak intensity, proportional...

Electrochemical behaviour of brass in chloride solution concentrations found in eccrine fingerprint sweat

Energy Technology Data Exchange (ETDEWEB)

Bond, John W., E-mail: jwb13@le.ac.uk [Department of Chemistry, George Porter Building, University of Leicester, University Road, Leicester LE1 7RH (United Kingdom); Lieu, Elaine [Department of Physics and Astronomy, University of Leicester, University Road, Leicester LE1 7RH (United Kingdom)

2014-09-15

Highlights: • Corrosion of brass in NaCl concentrations found in eccrine sweat was investigated. • Concentrations < 0.2 M produce a layer of mainly zinc oxide after 24 h. • A concentration of 0.2 M enables active corrosion of brass at room temperature. • 0.2 M NaCl gives both zinc and copper dissolution. • 24-h immersion of brass in 0.2 M NaCl gives an oxide film thickness of 1.3 nm. - Abstract: In this work, the corrosion properties of α phase brass immersed in concentrations of aqueous NaCl solutions that are typically found in eccrine fingerprint sweat and range between 0.01 M and 0.2 M have been analysed. Analysis methods employed were electrochemical techniques, X-ray photoelectron spectroscopy and optical profiling. For NaCl concentrations <0.2 M, active corrosion did not occur although, after a period of 24 h, a passivating layer of mainly zinc oxide formed. At a concentration of 0.2 M active corrosion did occur, with measured corrosion potentials consistent with both brass and copper dissolution. A 1 h contact time at this concentration (0.2 M) resulted in the formation of a zinc oxide passivating layer with the surface ratio of zinc oxide to copper oxide increasing with time. Film thickness was calculated to be of the order of 1.3 nm after 24 h contact. Formation of oxide layers on brass by fingerprint sweat as observed here may well have implications for the successful investigation of crime by the visualisation of corrosion fingerprint ridge patterns or the reduction of hospital environmental contamination by hand contact with brass objects such as door handles or taps.

Effect of ion irradiation on the surface, structural and mechanical properties of brass

Energy Technology Data Exchange (ETDEWEB)

Ahmad, Shahbaz; Bashir, Shazia, E-mail: shaziabashir@gcu.edu.pk; Ali, Nisar; Umm-i-Kalsoom,; Yousaf, Daniel; Faizan-ul-Haq,; Naeem, Athar; Ahmad, Riaz; Khlaeeq-ur-Rahman, M.

2014-04-01

Highlights: • Brass targets were exposed to carbon ions of energy 2 MeV. • The effect of ion dose has been investigated. • The surface morphology is investigated by SEM analysis. • XRD analysis is performed to reveal structural modification. • Mechanical properties were investigated by tensile testing and microhardness testing. - Abstract: Modifications to the surface, structural and mechanical properties of brass after ion irradiation have been investigated. Brass targets were bombarded by carbon ions of 2 MeV energy from a Pelletron linear accelerator for various fluences ranging from 56 × 10{sup 12} to 26 × 10{sup 13} ions/cm{sup 2}. A scanning electron microscope and X-ray diffractometer were utilized to analyze the surface morphology and crystallographic structure respectively. To explore the mechanical properties e.g., yield stress, ultimate tensile strength and microhardness of irradiated brass, an universal tensile testing machine and Vickers microhardness tester were used. Scanning electron microscopy results revealed an irregular and randomly distributed sputter morphology for a lower ion fluence. With increasing ion fluence, the incoherently shaped structures were transformed into dendritic structures. Nano/micro sized craters and voids, along with the appearance of pits, were observed at the maximum ion fluence. From X-ray diffraction results, no new phases were observed to be formed in the brass upon irradiation. However, a change in the peak intensity and higher and lower angle shifting were observed, which represents the generation of ion-induced defects and stresses. Analyses confirmed modifications in the mechanical properties of irradiated brass. The yield stress, ultimate tensile strength and hardness initially decreased and then increased with increasing ion fluence. The changes in the mechanical properties of irradiated brass are well correlated with surface and crystallographic modifications and are attributed to the generation

Effect of ion irradiation on the surface, structural and mechanical properties of brass

Science.gov (United States)

Ahmad, Shahbaz; Bashir, Shazia; Ali, Nisar; Umm-i-Kalsoom; Yousaf, Daniel; Faizan-ul-Haq; Naeem, Athar; Ahmad, Riaz; Khlaeeq-ur-Rahman, M.

2014-04-01

Modifications to the surface, structural and mechanical properties of brass after ion irradiation have been investigated. Brass targets were bombarded by carbon ions of 2 MeV energy from a Pelletron linear accelerator for various fluences ranging from 56 × 1012 to 26 × 1013 ions/cm2. A scanning electron microscope and X-ray diffractometer were utilized to analyze the surface morphology and crystallographic structure respectively. To explore the mechanical properties e.g., yield stress, ultimate tensile strength and microhardness of irradiated brass, an universal tensile testing machine and Vickers microhardness tester were used. Scanning electron microscopy results revealed an irregular and randomly distributed sputter morphology for a lower ion fluence. With increasing ion fluence, the incoherently shaped structures were transformed into dendritic structures. Nano/micro sized craters and voids, along with the appearance of pits, were observed at the maximum ion fluence. From X-ray diffraction results, no new phases were observed to be formed in the brass upon irradiation. However, a change in the peak intensity and higher and lower angle shifting were observed, which represents the generation of ion-induced defects and stresses. Analyses confirmed modifications in the mechanical properties of irradiated brass. The yield stress, ultimate tensile strength and hardness initially decreased and then increased with increasing ion fluence. The changes in the mechanical properties of irradiated brass are well correlated with surface and crystallographic modifications and are attributed to the generation, augmentation, recombination and annihilation of the ion-induced defects.

Antimicrobial brass coatings prepared on poly(ethylene terephthalate) textile by high power impulse magnetron sputtering

Energy Technology Data Exchange (ETDEWEB)

Chen, Ying-Hung, E-mail: tieamo2002@gmail.com; Wu, Guo-Wei; He, Ju-Liang

2015-03-01

The goal of this work is to prepare antimicrobial, corrosion-resistant and low-cost Cu65Zn35 brass film on poly(ethylene terephthalate) (PET) fabric by high-power impulse magnetron sputtering (HIPIMS), which is known to provide high-density plasma, so as to generate a strongly adherent film at a reduced substrate temperature. The results reveal that the brass film grows in a layer-plus-island mode. Independent of their deposition time, the obtained films retain a Cu/Zn elemental composition ratio of 1.86 and exhibit primarily an α copper phase structure. Oxygen plasma pre-treatment for 1 min before coating can significantly increase film adhesion such that the brass-coated fabric of Grade 5 or Grade 4–5 can ultimately be obtained under dry and wet rubbing tests, respectively. However, a deposition time of 1 min suffices to provide effective antimicrobial properties for both Staphylococcus aureus and Escherichia coli. As a whole, the feasibility of using such advanced HIPIMS coating technique to develop durable antimicrobial textile was demonstrated. - Highlights: • Prepare antimicrobial, corrosion-resistant and low-cost Cu65Zn35 brass film on PET fabric by HIPIMS • Brass-coated fabric with excellent durability, even undergone rubbing and washing tests • Brass-coated fabric provides effective antimicrobial properties for E. coli and S. aureus. • After brass coating, PET fabric still retained its mechanical property.

Antimicrobial brass coatings prepared on poly(ethylene terephthalate) textile by high power impulse magnetron sputtering

International Nuclear Information System (INIS)

Chen, Ying-Hung; Wu, Guo-Wei; He, Ju-Liang

2015-01-01

The goal of this work is to prepare antimicrobial, corrosion-resistant and low-cost Cu65Zn35 brass film on poly(ethylene terephthalate) (PET) fabric by high-power impulse magnetron sputtering (HIPIMS), which is known to provide high-density plasma, so as to generate a strongly adherent film at a reduced substrate temperature. The results reveal that the brass film grows in a layer-plus-island mode. Independent of their deposition time, the obtained films retain a Cu/Zn elemental composition ratio of 1.86 and exhibit primarily an α copper phase structure. Oxygen plasma pre-treatment for 1 min before coating can significantly increase film adhesion such that the brass-coated fabric of Grade 5 or Grade 4–5 can ultimately be obtained under dry and wet rubbing tests, respectively. However, a deposition time of 1 min suffices to provide effective antimicrobial properties for both Staphylococcus aureus and Escherichia coli. As a whole, the feasibility of using such advanced HIPIMS coating technique to develop durable antimicrobial textile was demonstrated. - Highlights: • Prepare antimicrobial, corrosion-resistant and low-cost Cu65Zn35 brass film on PET fabric by HIPIMS • Brass-coated fabric with excellent durability, even undergone rubbing and washing tests • Brass-coated fabric provides effective antimicrobial properties for E. coli and S. aureus. • After brass coating, PET fabric still retained its mechanical property

Numerical solution of Stefan's problem to heterogeneous materials

International Nuclear Information System (INIS)

Basombrio, F.G.

1996-01-01

We present an extension of the methodology developed by R.H. Nochetto et al. to solve the Stefan problem, to situations for which the physical properties are dependent on the spatial point (thermic non-homogeneous materials). In this report, the theoretical and computational aspects are described. With the purpose of showing the performance of programme FASES2, two illustrative examples are included. (author). 6 refs., 2 figs

Two-Phase Immiscible Flows in Porous Media: The Mesocopic Maxwell–Stefan Approach

DEFF Research Database (Denmark)

Shapiro, Alexander

2015-01-01

We develop an approach to coupling between viscous flows of the two phases in porous media, based on the Maxwell–Stefan formalism. Two versions of the formalism are presented: the general form, and the form based on the interaction of the flowing phases with the interface between them. The last...... of mixing” between the flowing phases. Comparison to the available experimental data on the steady-state two-phase relative permeabilities is presented....... approach is supported by the description of the flow on the mesoscopic level, as coupled boundary problems for the Brinkmann or Stokes equations. It becomes possible, in some simplifying geometric assumptions, to derive exact expressions for the phenomenological coefficients in the Maxwell–Stefan transport...

A comparison of Fick and Maxwell-Stefan diffusion formulations in PEMFC gas diffusion layers

Science.gov (United States)

Lindstrom, Michael; Wetton, Brian

2017-01-01

This paper explores the mathematical formulations of Fick and Maxwell-Stefan diffusion in the context of polymer electrolyte membrane fuel cell cathode gas diffusion layers. The simple Fick law with a diagonal diffusion matrix is an approximation of Maxwell-Stefan. Formulations of diffusion combined with mass-averaged Darcy flow are considered for three component gases. For this application, the formulations can be compared computationally in a simple, one dimensional setting. Despite the models' seemingly different structure, it is observed that the predictions of the formulations are very similar on the cathode when air is used as oxidant. The two formulations give quite different results when the Nitrogen in the air oxidant is replaced by helium (this is often done as a diagnostic for fuel cells designs). The two formulations also give quite different results for the anode with a dilute Hydrogen stream. These results give direction to when Maxwell-Stefan diffusion, which is more complicated to implement computationally in many codes, should be used in fuel cell simulations.

Memorias de un judío: el mundo visto por Stefan Zweig

Directory of Open Access Journals (Sweden)

Kênia Maria de Almeida Pereira

2011-03-01

Full Text Available El artículo traza el periplo vital e ideológico del escritor Stefan Zweig a partir de su libro El mundo que yo vi: mis memorias, de 1942. Se esboza la visión del fascismo que tuvo el intelectual, el drama del Holocausto y los terrores de la política antisemita de Adolfo Hitler a partir de la Segunda Guerra Mundial, a la vez que se formulan interrogantes sobre la política brasileña de la era de Getúlio Vargas respecto al fascismo. El texto desvela los misterios de la pasión, la vida y la muerte de Stefan Zweig durante las décadas de 1930 y 1940 en Brasil.

Generation of nanoparticles of bronze and brass by laser ablation in liquid

Energy Technology Data Exchange (ETDEWEB)

Sukhov, I.A. [Wave Research Center of A.M. Prokhorov General Physics Institute of the Russian Academy of Sciences, 38, Vavilov Street, 119991 Moscow (Russian Federation); Shafeev, G.A., E-mail: Shafeev@kapella.gpi.ru [Wave Research Center of A.M. Prokhorov General Physics Institute of the Russian Academy of Sciences, 38, Vavilov Street, 119991 Moscow (Russian Federation); Voronov, V.V. [Wave Research Center of A.M. Prokhorov General Physics Institute of the Russian Academy of Sciences, 38, Vavilov Street, 119991 Moscow (Russian Federation); Sygletou, M. [Institute of Electronic Structure and Laser, Foundation for Research and Technology—Hellas (IESL-FORTH), P.O. Box 1527, Heraklion 711 10 (Greece); Department of Physics, University of Crete, Vassilika Vouton, GR-711 10, Heraklion (Greece); Stratakis, E.; Fotakis, C. [Institute of Electronic Structure and Laser, Foundation for Research and Technology—Hellas (IESL-FORTH), P.O. Box 1527, Heraklion 711 10 (Greece)

2014-05-01

Nanoparticles of brass and bronze are generated by ablation of corresponding bulk targets in liquid ethanol. The experiments were performed using three pulsed lasers with different pulse duration: ytterbium fiber laser (80 ns), a Neodymium:YAG laser (10 ps), and femtosecond Ti:sapphire laser (200 fs). The generated nanoparticles (NPs) are characterized by UV–vis absorption spectroscopy, X-ray diffractometry, Raman scattering, and Transmission Electron Microscopy. The size of generated NPs lies in the range 10–25 nm depending on the laser source. The X-ray diffractometry reveals the change of phase composition of brass NPs compared to the initial target in case of ablation with 80 ns laser source, while with 10 ps laser pulses this effect is less pronounced. Brass NPs generated with pico- and femtosecond laser radiation show the plasmon resonance in the vicinity of 560 nm and no plasmon peak for NPs generated with longer laser pulses. Raman analysis shows the presence of Cu{sub 2}O in generated NPs. The stability of generated NPs of both brass and bronze to oxidation is compared to that of Cu NPs generated in similar experimental conditions.

Podolsky electromagnetism at finite temperature: Implications on the Stefan-Boltzmann law

International Nuclear Information System (INIS)

Bonin, C. A.; Bufalo, R.; Pimentel, B. M.; Zambrano, G. E. R.

2010-01-01

In this work we study Podolsky electromagnetism in thermodynamic equilibrium. We show that a Podolsky mass-dependent modification to the Stefan-Boltzmann law is induced and we use experimental data to limit the possible values for this free parameter.

77 FR 23508 - Brass Sheet and Strip From France, Germany, Italy, and Japan

Science.gov (United States)

2012-04-19

...)] Brass Sheet and Strip From France, Germany, Italy, and Japan Determination On the basis of the record \\1... antidumping duty orders on brass sheet and strip from France, Germany, Italy, and Japan would be likely to... from France, Germany, Italy, and Japan: Investigation Nos. 731-TA-313, 314, 317, and 379 (Third Review...

The Maxwell-Stefan description of mixture diffusion in nanoporous crystalline materials

NARCIS (Netherlands)

Krishna, R.

2014-01-01

The efficacy of nanoporous crystalline materials in separation applications is often influenced to a significant extent by diffusion of guest molecules within the pores of the structural frameworks. The Maxwell-Stefan (M-S) equations provide a fundamental and convenient description of mixture

The brass-type texture and its deviation from the copper-type texture

DEFF Research Database (Denmark)

Leffers, Torben; Ray, R.K.

2009-01-01

Our basic aim with the present review is to address the classical problem of the “fcc rolling texture transition” – the fact that fcc materials may, depending on material parameters and rolling conditions, develop two different types of rolling textures, the copper-type texture and the brass...... the subject and sketch our approach for dealing with it. We then recapitulate the decisive progress made during the nineteen sixties in the empirical description of the fcc rolling texture transition and in lining up a number of possible explanations. Then follows a section about experimental investigations...... of the brass-type texture after the nineteen sixties covering texture measurements and microstructural investigations. The main observations are: (1) The brass-type texture deviates from the copper-type texture from an early stage of texture development. (2) Deformation twinning has a decisive effect...

Das Stefan-Problem bei der Kristallzucht nach Czochralski

OpenAIRE

Kopetsch, H.

1987-01-01

The shape of the crystal-melt interface in Czochralski crystal growth may strongly influence the quality of the grown crystal. Thus a numerical algorithm has been developed which allows us to study the dynamics of this interface subject to various growth conditions. Especially the hydrodynamics in the melt is taken into account. Mathematically, a moving boundary problem (Stefan problem) has to be solved along with the flow and temperature field in melt and crystal which is treated by the meth...

Determination of a brass alloy concentration composition using calibration-free laser-induced breakdown spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Achouri, M.; Baba-Hamed, T.; Beldjilali, S. A., E-mail: sidahmed.beldjilali@univ-usto.dz; Belasri, A. [Université des Sciences et de la Technologie d’Oran Mohamed Boudiaf USTO-MB, LPPMCA (Algeria)

2015-09-15

Laser-induced breakdown spectroscopy (LIBS) is a technique that can provide qualitative and quantitative measurements of the characteristics of irradiated metals. In the present work, we have calculated the parameters of the plasma produced from a brass alloy sample under the action of a pulsed Nd: YAG laser operating at 1064 nm. The emission lines of copper atoms (Cu I), zinc atoms (Zn I), and lead atoms (Pb I), which are elements of a brass alloy composition, were used to investigate the parameters of the brass plasma. The spectral profiles of Cu, Zn, and Pb lines have been used to extract the electron temperature and density of the brass alloy plasma. The characteristics of Cu, Zn, and Pb were determined quantatively by the calibration-free LIBS (CF-LIBS) method considering for accurate analysis that the laser-induced ablated plasma is optically thin in local thermodynamic equilibrium conditions and the plasma ablation is stoichiometric. The Boltzmann plot method was used to evaluate the plasma temperature, and the Stark broadened profiles were used to determine the electron density. An algorithm based on the experimentally measured values of the intensity of spectral lines and the basic laws of plasma physics was developed for the determination of Cu, Zn, and Pb concentrations in the brass sample. The concentrations C{sub CF-LIBS} calculated by CF-LIBS and the certified concentrations C{sub certified} were very close.

Predicting the need for institutional care shortly after admission to rehabilitation: Rasch analysis and predictive validity of the BRASS Index.

Science.gov (United States)

Panella, L; La Porta, F; Caselli, S; Marchisio, S; Tennant, A

2012-09-01

Effective discharge planning is increasingly recognised as a critical component of hospital-based Rehabilitation. The BRASS index is a risk screening tool for identification, shortly after hospital admission, of patients who are at risk of post-discharge problems. To evaluate the internal construct validity and reliability of the Blaylock Risk Assessment Screening Score (BRASS) within the rehabilitation setting. Observational prospective study. Rehabilitation ward of an Italian district hospital. One hundred and four consecutively admitted patients. Using classical psychometric methods and Rasch analysis (RA), the internal construct validity and reliability of the BRASS were examined. Also, external and predictive validity of the Rasch-modified BRASS (RMB) score were determined. Reliability of the original BRASS was low (Cronbach's alpha=0.595) and factor analyses showed that it was clearly multidimensional. A RA, based on a reduced 7-BRASS item set (RMB), satisfied model's expectations. Reliability was 0.777. The RMB scores strongly correlated with the original BRASS (rho=0.952; P28 days (RR=7.6, 95%CI=1.8-31.9). This study demonstrated that the original BRASS was multidimensional and unreliable. However, the RMB holds adequate internal construct validity and is sufficiently reliable as a predictor of discharge problems for group, but not individual use. The application of tools and methods (such as the BRASS Index) developed under the biomedical paradigm in a Physical and Rehabilitation Medicine setting may have limitations. Further research is needed to develop, within the rehabilitation setting, a valid measuring tool of risk of post-discharge problems at the individual level.

Photoelectron studies of machined brass surfaces

Science.gov (United States)

Potts, A. W.; Merrison, J. P.; Tournas, A. D.; Yacoot, A.

UV photoelectron spectroscopy has been used to determine the surface composition of machined brass. The results show a considerable change between the photoelectron surface composition and the bulk composition of the same sample determined by energy-dispersive X-ray fluorescence. On the surface the lead composition is increased by ˜900 G. This is consistent with the important part that lead is believed to play in improving the machinability of this alloy.

Das ritual der unterwerfung Stefan Nemanjas unter Maunel I. Komnenos (1172

Directory of Open Access Journals (Sweden)

Vučetić Martin Marko

2013-01-01

Full Text Available This article investigates the ceremonial of the subjection of the Serbian župan Stefan Nemanja to the Byzantine emperor Manuel I Komnenos (1172 and compares it with similar events of the period in question. It argues for a strong influence of western forms of conflict resolution (“deditio” in the ceremonial.

A computational study of adhesion between rubber and metal sulfides at rubber–brass interface

Energy Technology Data Exchange (ETDEWEB)

Ling, Chian Ye; Hirvi, Janne T.; Suvanto, Mika; Bazhenov, Andrey S. [Department of Chemistry, University of Eastern Finland, P.O. Box 111, FI80101 Joensuu (Finland); Ajoviita, Tommi; Markkula, Katriina [R & D, Car Tyres, Nokian Tyres plc., P.O. Box 20, FI37101 Nokia (Finland); Pakkanen, Tapani A., E-mail: tapani.pakkanen@uef.fi [Department of Chemistry, University of Eastern Finland, P.O. Box 111, FI80101 Joensuu (Finland)

2015-05-12

Highlights: • An atomic level model for brass–rubber interactions has been presented. • The main adhesion force has been tracked to the rubber sulfur–brass zinc or brass copper interaction. • The model gives new understanding of the adhesion and can be used for further developments of the system. - Abstract: Computational study at level of density functional theory has been carried out in order to investigate the adhesion between rubber and brass plated steel cord, which has high importance in tire manufacturing. Adsorption of natural rubber based adsorbate models has been studied on zinc sulfide, ZnS(1 1 0), and copper sulfide, Cu{sub 2}S(1 1 1) and CuS(0 0 1), surfaces as the corresponding phases are formed in adhesive interlayer during rubber vulcanization. Saturated hydrocarbons exhibited weak interactions, whereas unsaturated hydrocarbons and sulfur-containing adsorbates interacted with the metal atoms of sulfide surfaces more strongly. Sulfur-containing adsorbates interacted with ZnS(1 1 0) surface stronger than unsaturated hydrocarbons, whereras both Cu{sub 2}S(1 1 1) and CuS(0 0 1) surfaces showed opposite adsorption preference as unsaturated hydrocarbons adsorbed stronger than sulfur-containing adsorbates. The different interaction strength order can play role in rubber–brass adhesion with different relative sulfide concentrations. Moreover, Cu{sub 2}S(1 1 1) surface exhibits higher adsorption energies than CuS(0 0 1) surface, possibly indicating dominant role of Cu{sub 2}S in the adhesion between rubber and brass.

Structural Evolution and Mechanisms of Fatigue in Polycrystalline Brass

DEFF Research Database (Denmark)

Carstensen, Jesper Vejlø

The plastic strain controlled fatigue behaviour of polycrystalline Cu-15%Zn and Cu-30%Zn has been investigated with the aim of studying the effect of slip mode modification by the addition of zinc to copper. It has been clearly demonstrated, that true cyclic saturation does not occur in the plastic...... type single slip. This behaviour has been described by the self-consistent Sachs-Eshelby model, which provides estimates of the CSS curve for brass polycrystals. Successive stages of primary hardening, softening and secondary hardening has been observed in the plastic strain controlled fatigue of brass....... It has been found that the primary hardening is attributed to an increase of intergranular stresses whereas the sec-ondary hardening apparently is attributed to an increase of friction stresses. Investigations of the structural evolution show that the softening behaviour can be explained by the presence...

SU-F-T-517: Determining the Tissue Equivalence of a Brass Mesh Bolus in a Reconstructed Chest Wall Irradiation

Energy Technology Data Exchange (ETDEWEB)

Shekel, E; Epstein, D; Levin, D [Dept of radiotherapy, Assuta Medical Centers, Tel Aviv (Israel)

2016-06-15

Purpose: To determine the tissue equivalence of a brass mesh bolus (RPD) in the setting of a reconstructed chest wall irradiation Methods: We measured breast skin dose delivered by a tangential field plan on an anthropomorphic phantom using Mosfet and nanoDot (Landauer) dosimeters in five different locations on the breast. We also measured skin dose using no bolus, 5mm and 10 mm superflab bolus. In the Eclipse treatment planning system (Varian, Palo Alto, CA) we calculated skin dose for different bolus thicknesses, ranging from 0 to 10 mm, in order to evaluate which calculation best matches the brass mesh measurements, as the brass mesh cannot be simulated due to artefacts.Finally, we measured depth dose behavior with the brass mesh bolus to verify that the bolus does not affect the dose to the breast itself beyond the build-up region. Results: Mosfet and nanoDot measurements were consistent with each other.As expected, skin dose measurements with no bolus had the least agreement with Eclipse calculation, while measurements for 5 and 10 mm agreed well with the calculation despite the difficulty in conforming superflab bolus to the breast contour. For the brass mesh the best agreement was for 3 mm bolus Eclipse calculation. For Mosfets, the average measurement was 90.8% of the expected dose, and for nanoDots 88.33% compared to 83.34%, 88.64% and 93.94% (2,3 and 5 mm bolus calculation respectively).The brass mesh bolus increased skin dose by approximately 25% but there was no dose increase beyond the build-up region. Conclusion: Brass mesh bolus is most equivalent to a 3 mm bolus, and does not affect the dose beyond the build-up region. The brass mesh cannot be directly calculated in Eclipse, hence a 3mm bolus calculation is a good reflection of the dose response to the brass mesh bolus.

The Solution of Two-Phase Inverse Stefan Problem Based on a Hybrid Method with Optimization

Directory of Open Access Journals (Sweden)

Yang Yu

2015-01-01

Full Text Available The two-phase Stefan problem is widely used in industrial field. This paper focuses on solving the two-phase inverse Stefan problem when the interface moving is unknown, which is more realistic from the practical point of view. With the help of optimization method, the paper presents a hybrid method which combines the homotopy perturbation method with the improved Adomian decomposition method to solve this problem. Simulation experiment demonstrates the validity of this method. Optimization method plays a very important role in this paper, so we propose a modified spectral DY conjugate gradient method. And the convergence of this method is given. Simulation experiment illustrates the effectiveness of this modified spectral DY conjugate gradient method.

Effects of differently hardened brass foil laminate on the electromechanical property of externally laminated CC tapes

Energy Technology Data Exchange (ETDEWEB)

Bautista, Zhierwinjay; Shin, Hyung Seop [Dept. of Mechanical Design Engineering, Andong National University, Andong (Korea, Republic of); Mean, Byoung Jean; Lee, Jae Hun [SuNAM Co Ltd., Anseong (Korea, Republic of)

2016-12-15

The mechanical properties of REBCO coated conductor (CC) wires under uniaxial tension are largely determined by the thick component layers in the architecture, namely, the substrate and the stabilizer or even the reinforcement layer. Depending on device applications of the CC tapes, it is necessary to reinforce thin metallic foils externally to one-side or both sides of the CC tapes. Due to the external reinforcement of brass foils, it was found that this could increase the reversible strain limit from the Cu-stabilized CC tapes. In this study, the effects of differently hardened brass foil laminate on the electromechanical property of CC tapes were investigated under uniaxial tension loading. The tensile strain dependence of the critical current (I{sub c}) was measured at 77 K and self-field. Depending on whether the I{sub c} of CC tapes were measured during loading or after unloading, a reversible strain (or stress) limit could be determined, respectively. The both-sides of the Cu-stabilized CC tapes were laminated with brass foils with different hardness, namely 1/4H, 1H and EH. From the obtained results, it showed that the yield strength of the brass laminated CC tapes with EH brass foil laminate was comparable to the one of the Cu-stabilized CC tape due to its large yield strength even though its large volume fraction. It was found that the brass foil with different hardness was mainly sensitive on the stress dependence of I{sub c}, but not on the strain sensitivity due to the residual strain induced in the laminated CC tapes during unloading.

[Stefan Hartmann. Revaler Handwerker im Spiegel fer Ratsprotokolle von 1722 bis 1755] / Paul Kaegbein

Index Scriptorium Estoniae

Kaegbein, Paul

2007-01-01

Arvustus: Stefan Hartmann. Revaler Handwerker im Spiegel fer Ratsprotokolle von 1722 bis 1755. In : Ostseeprovinzen, baltische Staaten und das Nationale. Münster : LIT, 2005. lk. 89-112. Kanuti gildi koondunud ametite organisatsioonist ja struktuurist

Dr. Stefan Ambs: Increasing Diversity in Cancer Research: One Lab at a Time

Science.gov (United States)

As part of the series “Increasing Diversity in Cancer Research,” CRCHD interviewed Dr. Stefan Ambs, an investigator at NCI’s Center for Cancer Research, who is using novel approaches to discover gene differences in the tumors of African American patients.

A technical study of alloy compositions of "brass" wind musical instruments (1651-1867) utilizing non-destructive X-ray fluorescence

Science.gov (United States)

Bacon, Alice Louise

This thesis represents a new interdisciplinary approach to the conservation, care and curatorial study of 'brass' wind musical instruments. It attempts to combine metallurgical, chronological and historical aspects for a selection of instruments. The research consists of the systematic study of seventy-seven musical instruments, by known makers, using standardised non-destructive energy dispersive x-ray fluorescence (XRF). Such compositional data are virtually non-existent for historical 'brass' instruments in Britain and what few technical data that do exist are sporadic in quantity and quality. The development of brass instruments is interwoven with the history of brass making, but because there are a limited number of appropriate examples such links can be difficult to identify. This thesis describes the development of brass production from the cementation process to the commercial production of zinc and modern brass. Its relationship to the musical instrument industry in Britain is linked with historical evidence. It will be shown that innovation and known historical metallurgical achievements are reflected in the compositional changes of the alloys used for musical instruments. This thesis focuses on specific named brass wind musical instrument makers. This thesis sets out to investigate the extent to which a single analytical technique such as non-destructive analysis utilising XRF could be useful in the curatorial and conservation care of musical instruments. The results of the analyses revealed new aspects to the use of metals for making musical instruments. They give new information on approximate alloy compositions and, in particular, the results have shown that in the seventeenth-century in England, a ternary alloy of copper/tin/zinc was used, and that it was, perhaps, only superseded by brass (copper/zinc alloy) in the eighteenth century. It has been possible to arrange the results into a chronology of alloys particularly reflecting the change from the

Synchronous visualization of multimodal measurements on lips and glottis: comparison between brass instruments and the human voice production system.

OpenAIRE

Hézard , Thomas; FREOUR , Vincent; Causse , René; Hélie , Thomas; Scavone , Gary P.

2013-01-01

cote interne IRCAM: Hezard13a; None / None; National audience; Brass instruments and the human voice production system are both composed of a vibrating "human valve" (constriction in a pipe) coupled to an acoustic resonator: lips coupled to the brass instrument or vocal folds coupled to the vocal tract. In both cases, the aeroacoustic coupling is responsible for the self-oscillations and a large variety of regimes. Additionally, brass instruments and voice share difficulties for the...

Anthroponyms of Non-Biblical Origin in Stefan Yavorsky’s Sermons

Directory of Open Access Journals (Sweden)

Olga V. Salomatova

2014-06-01

Full Text Available The article focuses on archbishop Stefan Yavorsky’s works which reflect the transitional character of late 17th — early 18th centuries Russian sermons. Before that time the genre had been loyal to the canonical principles of scholasticism, and beginning with Stefan Yavorsky the sermon was enriched with new ways of material presentation and new content. The use of numerous biblical personal names, names of saints, Fathers of the Church and theologians represents a trait inherent in the sermon as a genre, a wide use of non-biblical names being chiefly a distinctive feature of scholastic works. Among those names the author points out: 1 names of saints, Fathers of the Church, church hierarchs; 2 names of gods and heroes of Antiquity; 3 names of ancient philosophers, historians and rulers; 4 names of foreign rulers, historians and public figures of the modern period; 5 names of Russian rulers. Thereby, the anthroponyms of non-biblical origin could be attributes of both “informational” (names of ancient gods and historical figures and “spiritual” (names of saints, Fathers of the Church, church hierarchs parts of a sermon. The author distinguishes the following functions of the analyzed names: 1 indication of sources of information (most frequent; 2 naming of the characters of a story or parable cited for illustrative purposes; 3 naming of a described person.

48 CFR 252.216-7000 - Economic price adjustment-basic steel, aluminum, brass, bronze, or copper mill products.

Science.gov (United States)

2010-10-01

...-basic steel, aluminum, brass, bronze, or copper mill products. 252.216-7000 Section 252.216-7000 Federal... adjustment—basic steel, aluminum, brass, bronze, or copper mill products. As prescribed in 216.203-4-70(a... Mill Products (JUL 1997) (a) Definitions. As used in this clause— Established price means a price which...

Historical basis of the Miracula of Saint Symeon in Stefan the First-Crowned’s life of Symeon

Directory of Open Access Journals (Sweden)

Komatina Ivana

2014-01-01

Full Text Available The paper is devoted to the research of the so-called Catalog of Miracles in the Life of Saint Symeon by Stefan the First-Crowned. Because the miracles are divided in the Life into those in which Symeon-Nemanja is revealed as a Saint, and those in which his heir Stefan the First-Crowned conquers the enemies of the Serbian State with his help, the attention is paid on research of their historical basis and chronological frame, as well as their religious essence. [Projekat Ministarstva nauke Republike Srbije, br. 177029: Srednjovekovne srpske zemlje (13-15. vek: politički, privredni, društveni i pravni procesi

A mathematical and numerical analysis of the Maxwell-Stefan diffusion equations

OpenAIRE

Boudin , Laurent; Grec , Bérénice; Salvarani , Francesco

2012-01-01

International audience; We consider the Maxwell-Stefan model of diffusion in a multicomponent gaseous mixture. After focusing on the main differences with the Fickian diffusion model, we study the equations governing a three-component gas mixture. We provide a qualitative and quantitative mathematical analysis of the model. The main properties of the standard explicit numerical scheme are also analyzed. We eventually include some numerical simulations pointing out the uphill diffusion phenome...

Synthesis and atomic structure determination of Al8V5 gamma-brass

International Nuclear Information System (INIS)

Mizutani, Uichiro

2006-01-01

Many structurally complex compounds like quasicrystals and their approximants are known to be stabilized at a particular electron per atom ratio e/a, regardless of constituent elements involved. This has been often referred to as the Hume-Rothery electron concentration rule. We consider the understanding of the Hume-Rothery stabilization mechanism to be best deepened by performing both ab initio LMTO-ASA and FLAPW band calculations for the complex compound whose atomic structure is experimentally determined. Admittedly, however, a computing time increases rapidly beyond practical level with increasing the number of atoms in a unit cell. Among various candidates, we chose a series of gamma-brasses containing 52 atoms in a unit cell by taking a full advantage of the facts that it exists in as many as 24 binary alloy systems and that its unit cell is just in size to be handled even in more time-consuming FLAPW method. We have so far studied the stability mechanism of Cu 5 Zn 8 and Cu 9 Al 4 , both being regarded as its prototype, and TM 2 Zn 11 gamma-brasses containing late transition elements TM=Fe, Co, Ni and Pd. In the present work, we chose the gamma-brass consisting of early transition metal element V and trivalent element Al. An almost single phase Al 8 V 5 gamma-brass was ultimately synthesized by overcoming metallurgical difficulties encountered. Its atomic structure was determined by using the Brandon model as a starting structure in the Rietveld structure analysis for powdered diffraction spectra taken at the beam line BL02B2 of 8 GeV synchrotron radiation facility, SPring-8, Japan. The atomic structure suitable for band calculations was then proposed by eliminating quenched-in chemical disorder, i.e., partial mixing of Al and V atoms at given sites with minimum sacrifice. (author)

Comparative Investigations on the Stress Corrosion Behavior of α -Al Bronze and α Brass in Sodium Nitrite

International Nuclear Information System (INIS)

Ashour, E.A.

1995-01-01

The stress corrosion behavior of α- Aluminum bronze (copper [Cu] -7% Al) (UNS C 61400) has been investigated as compared to α- brass under slow strain in sodium nitrite solutions under open - circuit and different anodic potentials. While α- brass was quite susceptible to SCC, α- Al bronze was found to be resistant to SCC. The ratios of time to failure in solution to that in air and of maximum stress in solution to that in air decreased sharply with increase of anodic potential for α-brass but remained virtually constant for α- Al bronze. The mode of failure was predominantly ductile for α- Al bronze under various conditions. The stress corrosion cracking of α - brass has been shown to be promoted by relatively concentrated Na N O 2 and high anodic potentials. Previous explanations for the change of the mode of failure from intergranular at open circuit potential (OCP) to transgranular cracking under anodic potential were confirmed. The bronzes resistance to SCC was attributed to the presence of Al 2 O 3 on the alloy surface. 10 Figs

The Influence of Temperature on the Frictional Behavior of Duplex-Coated Die Steel Rubbing Against Forging Brass

Science.gov (United States)

Ebrahimzadeh, I.; Ashrafizadeh, F.

2015-01-01

Improvement of die life under hot forging of brass alloys is considered vital from both economical and technical points of view. One of the best methods for improving die life is duplex coatings. In this research, the influence of temperature on the tribological behavior of duplex-coated die steel rubbing against forging brass was investigated. The wear tests were performed on a pin-on-disk machine from room temperature to 700 °C; the pins were made in H13 hot work tool steel treated by plasma nitriding and by PVD coatings of TiN-TiAlN-CrAlN. The disks were machined from a two-phase brass alloy too. The results revealed that the friction coefficient of this tribosystem went through a maximum at 550 °C and decreased largely at 700 °C. Furthermore, the formation of Cr2O3 caused the reduction of friction coefficient at 700 °C. PVD coatings proved their wear resistance up to 550 °C, well above the working temperature of the brass forging dies.

Morphology Controlled Fabrication of InN Nanowires on Brass Substrates

Directory of Open Access Journals (Sweden)

Huijie Li

2016-10-01

Full Text Available Growth of semiconductor nanowires on cheap metal substrates could pave the way to the large-scale manufacture of low-cost nanowire-based devices. In this work, we demonstrated that high density InN nanowires can be directly grown on brass substrates by metal-organic chemical vapor deposition. It was found that Zn from the brass substrates is the key factor in the formation of nanowires by restricting the lateral growth of InN. The nanowire morphology is highly dependent on the growth temperature. While at a lower growth temperature, the nanowires and the In droplets have large diameters. At the elevated growth temperature, the lateral sizes of the nanowires and the In droplets are much smaller. Moreover, the nanowire diameter can be controlled in situ by varying the temperature in the growth process. This method is very instructive to the diameter-controlled growth of nanowires of other materials.

On the effect of β phase on the microstructure and mechanical properties of friction stir welded commercial brass alloys.

Science.gov (United States)

Heidarzadeh, Akbar; Saeid, Tohid

2015-12-01

Conventional fusion welding of brass (Cu-Zn) alloys has some difficulties such as evaporation of Zn, toxic behavior of Zn vapor, solidification cracking, distortion, and oxidation [1], [2], [3]. Fortunately, friction stir welding (FSW) has been proved to be a good candidate for joining the brass alloys, which can overcome the fusion welding short comes [4], [5], [6], [7]. The data presented here relates to FSW of the single and double phase brass alloys. The data is the microstructure and mechanical properties of the base metals and joints.

Lattice Boltzmann scheme for mixture modeling: analysis of the continuum diffusion regimes recovering Maxwell-Stefan model and incompressible Navier-Stokes equations.

Science.gov (United States)

Asinari, Pietro

2009-11-01

A finite difference lattice Boltzmann scheme for homogeneous mixture modeling, which recovers Maxwell-Stefan diffusion model in the continuum limit, without the restriction of the mixture-averaged diffusion approximation, was recently proposed [P. Asinari, Phys. Rev. E 77, 056706 (2008)]. The theoretical basis is the Bhatnagar-Gross-Krook-type kinetic model for gas mixtures [P. Andries, K. Aoki, and B. Perthame, J. Stat. Phys. 106, 993 (2002)]. In the present paper, the recovered macroscopic equations in the continuum limit are systematically investigated by varying the ratio between the characteristic diffusion speed and the characteristic barycentric speed. It comes out that the diffusion speed must be at least one order of magnitude (in terms of Knudsen number) smaller than the barycentric speed, in order to recover the Navier-Stokes equations for mixtures in the incompressible limit. Some further numerical tests are also reported. In particular, (1) the solvent and dilute test cases are considered, because they are limiting cases in which the Maxwell-Stefan model reduces automatically to Fickian cases. Moreover, (2) some tests based on the Stefan diffusion tube are reported for proving the complete capabilities of the proposed scheme in solving Maxwell-Stefan diffusion problems. The proposed scheme agrees well with the expected theoretical results.

Inhibition of the Cu65/Zn35 brass corrosion by natural extract of Camellia sinensis

International Nuclear Information System (INIS)

Ramde, Tambi; Rossi, Stefano; Zanella, Caterina

2014-01-01

In this work, the corrosion inhibition of brass was studied using natural plant extract, Camellia sinensis, in 0.1 M Na2SO4 solutions with pH 7 and pH 4. Electrochemical techniques (potentiodynamic polarization, electrochemical impedance spectroscopy) and scanning electron microscopy (SEM) were applied to study the brass corrosion behavior in presence and absence of the extract. The results indicated that the extract is a very effective corrosion inhibitor for brass corrosion process in both the acidic and neutral media by virtue of adsorption. The inhibition effect increases by time as demonstrated by the EIS monitoring for 120 h. In the blank solution the corrosion process leads to the formation of a dark oxide patina at pH 7 and induces localized corrosion morphology at pH 4. The extract presence can avoid both the dark patina and the pits formation.

Inhibition of the Cu65/Zn35 brass corrosion by natural extract of Camellia sinensis

Energy Technology Data Exchange (ETDEWEB)

Ramde, Tambi, E-mail: t_ramde@univ-ouaga.bf [Equipe Chimie Physique et Electrochimie, Laboratoire de Chimie Moléculaire et des Matériaux, Université de Ouagadougou, 03 BP 7021 Ouagadougou 03 (Burkina Faso); Department of Industrial Engineering, University of Trento, via Sommarive 9, 38123 Trento (Italy); Rossi, Stefano; Zanella, Caterina [Department of Industrial Engineering, University of Trento, via Sommarive 9, 38123 Trento (Italy)

2014-07-01

In this work, the corrosion inhibition of brass was studied using natural plant extract, Camellia sinensis, in 0.1 M Na2SO4 solutions with pH 7 and pH 4. Electrochemical techniques (potentiodynamic polarization, electrochemical impedance spectroscopy) and scanning electron microscopy (SEM) were applied to study the brass corrosion behavior in presence and absence of the extract. The results indicated that the extract is a very effective corrosion inhibitor for brass corrosion process in both the acidic and neutral media by virtue of adsorption. The inhibition effect increases by time as demonstrated by the EIS monitoring for 120 h. In the blank solution the corrosion process leads to the formation of a dark oxide patina at pH 7 and induces localized corrosion morphology at pH 4. The extract presence can avoid both the dark patina and the pits formation.

Powder metallurgy ferrous synchronizer ring with brass-based friction layer; Tetsu-do niso shoketsu synchronize ring no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Okajima, H; Yoshikawa, K; Miyajima, K; Sugiyama, M [Toyota Motor Corp., Aichi (Japan); Nakamura, M; Ito, M [Japan Powder Metallurgy Co. Ltd., Tokyo (Japan)

1997-10-01

Synchronizer rings for manual transmissions are generally made of brass or molybdenum coated brass. Powder metallurgy (PM) synchronizer ring was developed for the purpose of high performance and cost reduction. This synchronizer ring consists of the high strength PM ferrous ring that needs neither special densification nor heat treatment, and it has the brass-based friction layer. New joining technique was required because of that shape and two different materials. Powder of copper-phosphorus alloy are admixed with the friction material. While sintering, that melt and migrate to the interface. Then the friction layer and the ferrous ring are joined tightly. 7 refs., 9 figs., 6 tabs.

A Stefan model for mass transfer in a rotating disk reaction vessel

KAUST Repository

BOHUN, C. S.

2015-05-04

Copyright © Cambridge University Press 2015. In this paper, we focus on the process of mass transfer in the rotating disk apparatus formulated as a Stefan problem with consideration given to both the hydrodynamics of the process and the specific chemical reactions occurring in the bulk. The wide range in the reaction rates of the underlying chemistry allows for a natural decoupling of the problem into a simplified set of weakly coupled convective-reaction-diffusion equations for the slowly reacting chemical species and a set of algebraic relations for the species that react rapidly. An analysis of the chemical equilibrium conditions identifies an expansion parameter and a reduced model that remains valid for arbitrarily large times. Numerical solutions of the model are compared to an asymptotic analysis revealing three distinct time scales and chemical diffusion boundary layer that lies completely inside the hydrodynamic layer. Formulated as a Stefan problem, the model generalizes the work of Levich (Levich and Spalding (1962) Physicochemical hydrodynamics, vol. 689, Prentice-Hall Englewood Cliffs, NJ) and will help better understand the natural limitations of the rotating disk reaction vessel when consideration is made for the reacting chemical species.

Evaluation Characterization of Mechanisms Controlling Fate and Effects of Army Smokes. (Transport, Transformations, Fate and Terrestrial Ecological Effects of Brass Obscurants).

Science.gov (United States)

1990-08-29

Ecological Dose of Brass Flake Causing 50% Inhibition (EcDso) of Microbial Activity ................... 3.70 FIGURE 3.10 Ecological Dose of Brass Flake...diversity was determined by the procedure of Atlas (1 984a) and Atlas and Bartha (1987). Total heterotrophic bacteria were counted on Dlfcoo nutrient...0.99) 2515 (0.99) 1451 (0.97) 1335 (0.97) (a) EcDs 0 , the ecological concentration of brass flake causing 50% Inhibition of microbial parameter, was

Growth of surface structures correlated with structural and mechanical modifications of brass by laser-induced Si plasma ions implantation

Science.gov (United States)

Ahmad, Shahbaz; Bashir, Shazia; Rafique, M. Shahid; Yousaf, Daniel

2017-04-01

Laser-produced Si plasma is employed as an ion source for implantation on the brass substrate for its surface, structural, and mechanical modifications. Thomson parabola technique is employed for the measurement of energy and flux of Si ions using CR-39. In response to stepwise increase in number of laser pulses from 3000 to 12000, four brass substrates were implanted by laser-induced Si plasma ions of energy 290 keV at different fluxes ranging from 45 × 1012 to 75 × 1015 ions/cm2. SEM analysis reveals the formation of nano/micro-sized irregular shaped cavities and pores for the various ion fluxes for varying numbers of laser pulses from 3000 to 9000. At the maximum ion flux for 12,000 pulses, distinct and organized grains with hexagonal and irregular shaped morphology are revealed. X-ray diffractometer (XRD) analysis exhibits that a new phase of CuSi (311) is identified which confirms the implantation of Si ions in brass substrate. A significant decrease in mechanical properties of implanted brass, such as Yield Stress (YS), Ultimate Tensile Strength (UTS), and hardness, with increasing laser pulses from 3000 to 6000 is observed. However, with increasing laser pulses from 9000 to a maximum value of 12,000, an increase in mechanical properties like hardness, YS, and UTS is observed. The generation as well as annihilation of defects, recrystallization, and intermixing of Si precipitates with brass matrix is considered to be responsible for variations in surface, structural, and mechanical modifications of brass.

Lots of Brass, Lots of Colors

DEFF Research Database (Denmark)

Steijn, Arthur

2014-01-01

Those entering the foyer ahead of the brass concert find several installations on the ground floor of the Copenhagen Opera House. Each installation explores the relationship between music and color, and there are musical instruments (trombones) available for people to play. On a large TV screen......, streams of colored particles represent the musical sounds that are picked up by a microphone when playing the trombone. People are also invited to take their own ‘particle LED light’ into the concert hall and use them to accompany the music. When seated, the link becomes obvious: Music and colors become...

Corrosion fatigue behavior of high strength brass in aqueous solutions

Energy Technology Data Exchange (ETDEWEB)

Hamada, A.S.; Kassem, M.A.; Ramadan, R.M.; El-Zeky, M.A. [Suez Canal Univ., Dept. of Metallurgy and Materials Engineering (Egypt)

2000-07-01

Corrosion fatigue behavior of British Standard high strength brass, CZ 127 has been studied in various environments, 3.5%NaC1 solution and 3.5%NaC1 containing 1000ppm ammonia by applying the reverse bending technique, strain-controlled cyclic, at 67 cycles/min. Characteristics of the produced alloy were studied using differential thermal analysis with applying its results in heat treating of the alloy; metallographic examinations; hardness measurements; X-ray; and electrochemical behavior of the unstressed alloy. CZ 127 was fatigued at three different conditions, solution treated, peak aged, and over aged at a fixed strain amplitude, 0.03 5. Solution treated alloy gave the best fatigue properties in all environments tested among the other materials. Results of the alloy studied were compared with that obtained of 70/30 {alpha}-brass. Fracture surface of the fatigued alloy was examined using optical microscope and scanning electron microscope equipped with EDX. (author)

Corrosion fatigue behavior of high strength brass in aqueous solutions

International Nuclear Information System (INIS)

Hamada, A.S.; Kassem, M.A.; Ramadan, R.M.; El-Zeky, M.A.

2000-01-01

Corrosion fatigue behavior of British Standard high strength brass, CZ 127 has been studied in various environments, 3.5%NaC1 solution and 3.5%NaC1 containing 1000ppm ammonia by applying the reverse bending technique, strain-controlled cyclic, at 67 cycles/min. Characteristics of the produced alloy were studied using differential thermal analysis with applying its results in heat treating of the alloy; metallographic examinations; hardness measurements; X-ray; and electrochemical behavior of the unstressed alloy. CZ 127 was fatigued at three different conditions, solution treated, peak aged, and over aged at a fixed strain amplitude, 0.03 5. Solution treated alloy gave the best fatigue properties in all environments tested among the other materials. Results of the alloy studied were compared with that obtained of 70/30 α-brass. Fracture surface of the fatigued alloy was examined using optical microscope and scanning electron microscope equipped with EDX. (author)

Comparison of brass alloys composition by laser-induced breakdown spectroscopy and self-organizing maps

Energy Technology Data Exchange (ETDEWEB)

Pagnotta, Stefano; Grifoni, Emanuela; Legnaioli, Stefano [Applied and Laser Spectroscopy Laboratory, ICCOM-CNR, Research Area of Pisa, Via G. Moruzzi 1, 56124 Pisa (Italy); Lezzerini, Marco [Department of Earth Sciences, University of Pisa, Via S. Maria 53, 56126 Pisa (Italy); Lorenzetti, Giulia [Applied and Laser Spectroscopy Laboratory, ICCOM-CNR, Research Area of Pisa, Via G. Moruzzi 1, 56124 Pisa (Italy); Palleschi, Vincenzo, E-mail: vincenzo.palleschi@cnr.it [Applied and Laser Spectroscopy Laboratory, ICCOM-CNR, Research Area of Pisa, Via G. Moruzzi 1, 56124 Pisa (Italy); Department of Civilizations and Forms of Knowledge, University of Pisa, Via L. Galvani 1, 56126 Pisa (Italy)

2015-01-01

In this paper we face the problem of assessing similarities in the composition of different metallic alloys, using the laser-induced breakdown spectroscopy technique. The possibility of determining the degree of similarity through the use of artificial neural networks and self-organizing maps is discussed. As an example, we present a case study involving the comparison of two historical brass samples, very similar in their composition. The results of the paper can be extended to many other situations, not necessarily associated with cultural heritage and archeological studies, where objects with similar composition have to be compared. - Highlights: • A method for assessing the similarity of materials analyzed by LIBS is proposed. • Two very similar fragments of historical brass were analyzed. • Using a simple artificial neural network the composition of the two alloys was determined. • The composition of the two brass alloys was the same within the experimental error. • Using self-organizing maps, the probability of the alloys to have the same composition was assessed.

Comparison of brass alloys composition by laser-induced breakdown spectroscopy and self-organizing maps

International Nuclear Information System (INIS)

Pagnotta, Stefano; Grifoni, Emanuela; Legnaioli, Stefano; Lezzerini, Marco; Lorenzetti, Giulia; Palleschi, Vincenzo

2015-01-01

In this paper we face the problem of assessing similarities in the composition of different metallic alloys, using the laser-induced breakdown spectroscopy technique. The possibility of determining the degree of similarity through the use of artificial neural networks and self-organizing maps is discussed. As an example, we present a case study involving the comparison of two historical brass samples, very similar in their composition. The results of the paper can be extended to many other situations, not necessarily associated with cultural heritage and archeological studies, where objects with similar composition have to be compared. - Highlights: • A method for assessing the similarity of materials analyzed by LIBS is proposed. • Two very similar fragments of historical brass were analyzed. • Using a simple artificial neural network the composition of the two alloys was determined. • The composition of the two brass alloys was the same within the experimental error. • Using self-organizing maps, the probability of the alloys to have the same composition was assessed

The effects of Ti and Sn alloying elements on precipitation strengthened Cu40Zn brass using powder metallurgy and hot extrusion

International Nuclear Information System (INIS)

Li Shufeng; Imai, Hisashi; Atsumi, Haruhiko; Kondoh, Katsuyoshi; Kojima, Akimichi; Kosaka, Yoshiharu; Yamamoto, Koji; Takahashi, Motoi

2012-01-01

Highlights: ► Alloying elements Ti and Sn are proposed as additives in 60/40 brass. ► Super-saturated Ti in powder creates high chemical potential for precipitation. ► Ti is readily segregated in primary particle boundaries in BS40–1.0Ti. ► Sn was proposed as an additive to inhibit segregation of Ti in BS40–1.0Ti. ► The introduction of Sn to BS40–1.0Ti brass effectively impedes Ti segregation. - Abstract: The effects of Ti and Sn alloying elements on the microstructural and mechanical properties of 60/40 brass were studied by powder metallurgy processing. The super-saturated solid solution of Ti creates a high precipitation reaction chemical potential in water-atomized BS40-1.0Ti brass powder. Consequently, BS40–1.0Ti brass was remarkably strengthened by the addition of Ti. However, Ti readily segregated in the primary particle boundaries at elevated temperatures, which detrimentally affected the mechanical properties of BS40–1.0Ti brass. Accordingly, Sn was proposed as an additive to BS40–0.6Sn1.0Ti to inhibit the segregation of Ti. Consequently, the Ti precipitate was retained in the form of CuSn 3 Ti 5 in the interior of grains and grain boundaries rather than in the primary particle boundaries. This result demonstrates that the addition of Sn can effectively hinder Ti segregation in the primary particle boundaries. Sn addition produced significant grain refinement and mechanical strengthening effects in BS40–0.6Sn1.0Ti brass. As a result, outstanding strengthening effects were observed for BS40–0.6Sn1.0Ti sintered at 600 °C, which exhibited a yield strength of 315 MPa, an ultimate tensile strength of 598 MPa, and a Vickers micro-hardness of 216 Hv. These values represent increases of 27.5%, 20.1% and 45.6%, over those of extruded BS40–1.0Ti brass.

The effects of Ti and Sn alloying elements on precipitation strengthened Cu40Zn brass using powder metallurgy and hot extrusion

Energy Technology Data Exchange (ETDEWEB)

Li Shufeng, E-mail: shufenglimail@gmail.com [Joining and Welding Research Institute, Osaka University (Japan); Imai, Hisashi; Atsumi, Haruhiko; Kondoh, Katsuyoshi [Joining and Welding Research Institute, Osaka University (Japan); Kojima, Akimichi; Kosaka, Yoshiharu [San-Etsu metals Co. Ltd., 1892, OHTA, Tonami, Toyama (Japan); Yamamoto, Koji; Takahashi, Motoi [Nippon Atomized Metal Powders Corporation, 87-16, Nishi-Sangao, Noda, Chiba (Japan)

2012-02-15

Highlights: Black-Right-Pointing-Pointer Alloying elements Ti and Sn are proposed as additives in 60/40 brass. Black-Right-Pointing-Pointer Super-saturated Ti in powder creates high chemical potential for precipitation. Black-Right-Pointing-Pointer Ti is readily segregated in primary particle boundaries in BS40-1.0Ti. Black-Right-Pointing-Pointer Sn was proposed as an additive to inhibit segregation of Ti in BS40-1.0Ti. Black-Right-Pointing-Pointer The introduction of Sn to BS40-1.0Ti brass effectively impedes Ti segregation. - Abstract: The effects of Ti and Sn alloying elements on the microstructural and mechanical properties of 60/40 brass were studied by powder metallurgy processing. The super-saturated solid solution of Ti creates a high precipitation reaction chemical potential in water-atomized BS40-1.0Ti brass powder. Consequently, BS40-1.0Ti brass was remarkably strengthened by the addition of Ti. However, Ti readily segregated in the primary particle boundaries at elevated temperatures, which detrimentally affected the mechanical properties of BS40-1.0Ti brass. Accordingly, Sn was proposed as an additive to BS40-0.6Sn1.0Ti to inhibit the segregation of Ti. Consequently, the Ti precipitate was retained in the form of CuSn{sub 3}Ti{sub 5} in the interior of grains and grain boundaries rather than in the primary particle boundaries. This result demonstrates that the addition of Sn can effectively hinder Ti segregation in the primary particle boundaries. Sn addition produced significant grain refinement and mechanical strengthening effects in BS40-0.6Sn1.0Ti brass. As a result, outstanding strengthening effects were observed for BS40-0.6Sn1.0Ti sintered at 600 Degree-Sign C, which exhibited a yield strength of 315 MPa, an ultimate tensile strength of 598 MPa, and a Vickers micro-hardness of 216 Hv. These values represent increases of 27.5%, 20.1% and 45.6%, over those of extruded BS40-1.0Ti brass.

Synchrotron applications in archaeometallurgy: analysis of high zinc brass astrolabes

International Nuclear Information System (INIS)

Newbury, B.; Stephenson, B.; Almer, J.; Notis, M.; Cargill, G. S. III; Stephenson, G. B.; Haeffner, D.

2003-01-01

Astrolabes represent the ingenious application of mathematics and astronomy in creating a single instrument that was used for both mapping the heavens and solving everyday problems in medieval Europe and Islamic lands. Constructed as a sort of analog computer to map the heavens, astrolabes were widely used for 700 years in Europe and 1000 years in Islamic lands. In this study, 14 astrolabes (5 European and 9 Islamic) have been analyzed non-destructively utilizing a high-energy collimated x-ray beam produced at the Advanced Photon Source synchrotron at Argonne National Laboratories. By impinging a high energy (71 KeV) beam of x-rays capable of transmitting through the brass astrolabes (up to 1 cm thick), metallurgical data can be produced from the bulk of the samples without any harm to them. Diffraction, fluorescence, and radiography experiments were performed on the astrolabes. Diffraction experiments allowed composition of the bulk samples as well as mechanical deformation and forming histories to be determined. X-ray fluorescence experiments allowed the near surface (∼ 20 μm) compositions to be determined, while radiography allowed mapping of the relative thickness. From these experiments and the forming history, it is possible to obtain information about microstructural characteristics and compositions fo the astrolabes that no other non-destructive technique could furnish. These data were used to learn more about technical and metalworking techniques used by the astrolabe manufacturers, as well as to determine if any astrolabe parts wee later (or modern) replacements. Of the Islamic astrolabes studied, a group of four from the Lahore region in current day Pakistan were found to have abnormally high (> 35%) zinc compositions. These astrolabes, signed by Diya al-Din Muhammad and dating from 1637-1662 AD, provide evidence for direct alloying of metallic zinc and copper to form brass. While metallic zinc is believed to have been produced in the region for many

Romain Rolland, Stefan Zweig et l’Europe (1919-1933)

OpenAIRE

Brancy , Jean-Yves

2005-01-01

International audience; Romain Rolland (1866-1944), l’homme qui a tenté de fédérer les esprits européens contre la Barbarie de la guerre en 1914, fut un précurseur de l’idée européenne moderne. Dans chaque pays, des hommes ont agi dans une même communauté d’esprit pour tendre vers ce même objectif. Parmi ceux-ci, Stefan Zweig (1881-1942), entretint avec Romain Rolland une correspondance abondante où le thème européen figure en bonne place. Les deux écrivains évoquent l’idée d’une Europe cultu...

Failure of the Hume-Rothery stabilization mechanism in the Ag5Li8 gamma-brass studied by first-principles FLAPW electronic structure calculations

International Nuclear Information System (INIS)

Mizutani, U; Asahi, R; Noritake, T; Sato, H; Takeuchi, T

2008-01-01

The first-principles FLAPW (full potential linearized augmented plane wave) electronic structure calculations were performed for the Ag 5 Li 8 gamma-brass, which contains 52 atoms in a unit cell and has been known for many years as one of the most structurally complex alloy phases. The calculations were also made for its neighboring phase AgLi B2 compound. The main objective in the present work is to examine if the Ag 5 Li 8 gamma-brass is stabilized at the particular electrons per atom ratio e/a = 21/13 in the same way as some other gamma-brasses like Cu 5 Zn 8 and Cu 9 Al 4 , obeying the Hume-Rothery electron concentration rule. For this purpose, the e/a value for the Ag 5 Li 8 gamma-brass as well as the AgLi B2 compound was first determined by means of the FLAPW-Fourier method we have developed. It proved that both the gamma-brass and the B2 compound possess an e/a value equal to unity instead of 21/13. Moreover, we could demonstrate why the Hume-Rothery stabilization mechanism fails for the Ag 5 Li 8 gamma-brass and proposed a new stability mechanism, in which the unique gamma-brass structure can effectively lower the band-structure energy by forming heavily populated bonding states near the bottom of the Ag-4d band

Microstructure and Mechanical Characterization of Friction-Stir-Welded Dual-Phase Brass

Science.gov (United States)

Ramesh, R.; Dinaharan, I.; Akinlabi, E. T.; Murugan, N.

2018-03-01

Friction stir welding (FSW) is an ideal process to join brass to avoid the evaporation of zinc. In the present investigation, 6-mm-thick dual-phase brass plates were joined efficiently using FSW at various tool rotational speeds. The microstructures were studied using optical microscopy, electron backscattered diffraction and transmission electron microscopy. The optical micrographs revealed the evolution of various zones across the joint line. The microstructure of the heat-affected zone was similar to that of base metal. The weld zone exhibited finer grains due to dynamic recrystallization. The recrystallization was inhomogeneous and the inhomogeneity reduced with increased tool rotational speed. The dual phase was preserved in the weld zone due to the retention of zinc. The severe plastic deformation created a lot of dislocations in the weld zone. The weld zone was strengthened after welding. The role of tool rotational speed on the joint strength is further reported.

Solid Obtained by Electrocoagulation of Vinasse, new Inhibitor for Acid Corrosion of Brass

Directory of Open Access Journals (Sweden)

Elaine Ojeda-Armaignac

2016-07-01

Full Text Available This work is part of research related to obtaining a corrosion inhibitor from vinasse, whose basic advantages is the possibility of using an industrial waste from distilleries ethyl alcohol as raw material in the production of a solid corrosion inhibitor of national production by electrocoagulation, which implies import substitution and cost reductions. The inhibitory action of the solids obtained by electrocoagulation of vinasse was investigated by potentiodynamic polarization techniques and electrochemical impedance spectroscopy. It was found that the efficiencies of inhibition against the brass into the electrolyte solution were very good, behaving as an efficient inhibitor in acid medium. Inhibition efficiency increases with increasing concentration. The maximum inhibition efficiency was of 93,43 % for the concentration of 2 mg / L of vinasse. Thermodynamic parameters were obtained at the study temperature. It was found that the adsorption of inhibitor molecules on the surface of brass obey the Langmuir isotherm, and the values of adsorción free energy of - 23.06 kJ mol-1 show the spontaneity of adsorption and indicate that the inhibitor is strongly adsorbed on the surface of brass, study of potentiodynamic polarization curves confirmed that it is a mixed type inhibitor, with an anode predominance and there is a predominant mechanism of physical adsorption combined with a chemisorption.

Mass transfer simulation of nanofiltration membranes for electrolyte solutions through generalized Maxwell-Stefan approach

International Nuclear Information System (INIS)

Hoshyargar, Vahid; Fadaei, Farzad; Ashrafizadeh, Seyed Nezameddin

2015-01-01

A comprehensive mathematical model is developed for simulation of ion transport through nanofiltration membranes. The model is based on the Maxwell-Stefan approach and takes into account steric, Donnan, and dielectric effects in the transport of mono and divalent ions. Theoretical ion rejection for multi-electrolyte mixtures was obtained by numerically solving the 'hindered transport' based on the generalized Maxwell-Stefan equation for the flux of ions. A computer simulation has been developed to predict the transport in the range of nanofiltration, a numerical procedure developed linearization and discretization form of the governing equations, and the finite volume method was employed for the numerical solution of equations. The developed numerical method is capable of solving equations for multicomponent systems of n species no matter to what extent the system shows stiffness. The model findings were compared and verified with the experimental data from literature for two systems of Na 2 SO 4 +NaCl and MgCl 2 +NaCl. Comparison showed great agreement for different concentrations. As such, the model is capable of predicting the rejection of different ions at various concentrations. The advantage of such a model is saving costs as a result of minimizing the number of required experiments, while it is closer to a realistic situation since the adsorption of ions has been taken into account. Using this model, the flux of permeates and rejections of multi-component liquid feeds can be calculated as a function of membrane properties. This simulation tool attempts to fill in the gap in methods used for predicting nanofiltration and optimization of the performance of charged nanofilters through generalized Maxwell-Stefan (GMS) approach. The application of the current model may weaken the latter gap, which has arisen due to the complexity of the fundamentals of ion transport processes via this approach, and may further facilitate the industrial development of

Determination of Copper and Zinc in Brass: Two Basic Methods

Science.gov (United States)

Fabre, Paul-Louis; Reynes, Olivier

2010-01-01

In this experiment, the concentrations of copper and zinc in brass are obtained by two methods. This experiment does not require advanced instrumentation, uses inexpensive chemicals, and can be easily carried out during a 3-h upper-level undergraduate laboratory. Pedagogically, the basic concepts of analytical chemistry in solutions, such as pH,…

Stefan blowing effect on bioconvective flow of nanofluid over a solid rotating stretchable disk

Directory of Open Access Journals (Sweden)

N.A. Latiff

2016-12-01

Full Text Available A mathematical model for the unsteady forced convection over rotating stretchable disk in nanofluid containing micro-organisms and taking into account Stefan blowing effect is presented theoretically and numerically. Appropriate transformations are used to transform the governing boundary layer equations into non-linear ordinary differential equations, before being solved numerically using the Runge-Kutta-Fehlberg method. The effect of the governing parameters on the dimensionless velocities, temperature, nanoparticle volume fraction (concentration, density of motile microorganisms as well as on the local skin friction, local Nusselt, Sherwood number and motile microorganisms numbers are thoroughly examined via graphs. It is observed that the Stefan blowing increases the local skin friction and reduces the heat transfer, mass transfer and microorganism transfer rates. The numerical results are in good agreement with those obtained from previous literature. Physical quantities results from this investigation show that the effects of higher disk stretching strength and suction case provides a good medium to enhance the heat, mass and microorganisms transfer compared to blowing case.

Electrochemical and DFT studies of {beta}-amino-alcohols as corrosion inhibitors for brass

Energy Technology Data Exchange (ETDEWEB)

Gao, Guo [State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116012 (China)]. E-mail: gaogaoguoguo@yahoo.com.cn; Liang, Chenghao [State Key Laboratory of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116012 (China); Electromechanics and Materials Engineering College, Dalian Maritime University, Dalian 116026 (China)

2007-03-20

The electrochemical performance of 1-diethylamino-propan-2-ol (EAP) and 1,3-bis-diethylamino-propan-2-ol (DEAP) for brass in simulated atmospheric water is evaluated by potentiodynamic curves and electrochemical impedance spectroscopy (EIS). The experimental results show that the investigated compounds, which can effectively retard the anodic dissolution of brass, are anodic inhibitors. Furthermore, the inhibition efficiency of DEAP is higher than that of EAP at the same concentration. This observation is supported by density functional theoretical (DFT) parameters such as the highest occupied molecule energy level (E {sub HOMO}), the lowest unoccupied molecule energy level (E {sub LUMO}), the energy difference ({delta}E) between E {sub HOMO} and E {sub LUMO}, Mulliken charges and the HOMO orbital.

Corrosion of mild steel, copper and brass in crude oil / seawater mixture

Digital Repository Service at National Institute of Oceanography (India)

PrabhaDevi, S.; Sawant, S.S.; Wagh, A.B.

Mild steel, copper and brass coupons were introduced in natural seawater containing varying amount of crude oil. Mild steel showed higher rate of corrosion in seawater containing oil and lower corrosion rate in natural as well as artificial seawater...

Moessbauer study of the composition and corrosion behaviour of electrodeposited and cast brass containing 1-4 m% tin

International Nuclear Information System (INIS)

Vertes, A.; Suba, M.; Varsanyi-Lakatos, M.; Czako-Nagy, I.; Pchelnikov, A.P.; Losev, V.V.

1982-01-01

Moessbauer measurements on electrodeposited and cast brass containing 1-4 m% tin were carried out using conversion electron detector. It was found that the tin formed phases with copper but not with zinc. The identified phases were β, γ, epsilon and eta and their ratio depended on the tin concentration and on the preparation process of the brass. The corrosion behaviour of the samples was also studied. (author)

Jozef Stefan Institute annual report for 1986

International Nuclear Information System (INIS)

Gams, M.

1987-06-01

This report presents the main features of the Josef Stefan Institute work in the course of the year 1986. The research projects and activities of the Institute are described in detail in the following fields: physics (theoretical, nuclear, solid state and reactor physics), chemistry (nuclear, physical, analytical, high temperature, fluorine chemistry, ceramics and biochemistry), electronics (automation, biocybernetics, robotics, computer science and information science, energy and process control and professional electronics), reactor engineering and safety, and applied mathematics and many interdisciplinary projects resulting from these fields. Special attention is paid to those fields and programmes which are important to the growth and development of the national economy. In addition, the operational structure of the Institute and its budget are also mentioned. The document contains a list of the project titles which the Institute coordinates. There is another list of printed material (journal articles, thesis, conference papers, etc.) written by researchers of the Institute. (Z.Z.). 1143 refs

Determination of Cu-Zn Fraction of an Ancient Brass Pipe by Prompt Gamma-ray Activation Analysis

Energy Technology Data Exchange (ETDEWEB)

Sun, G. M.; Lee, Y. N.; Moon, J. H.; Lee, K. H. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2009-05-15

Prompt Gamma Activation Analysis (PGAA) has an advantage over most other methods in the investigation of archeological and cultural objects which must be dealt with a non-destructive method. In this study, we study about how to determine the copper-zinc fraction in archeological objects such as a smoking pipe made from brass, where the proportions of copper and zinc can be varied to create a range of brasses with varying properties. In this study, a Japanese smoking pipe was analyzed to determine the copper-zinc fraction at the KAERI-SNU PGAA facility.

Combat Service Support Model Development: BRASS - TRANSLOG - Army 21

Science.gov (United States)

1984-07-01

throughout’the system. Transitional problems may address specific hardware and related software , such as the Standard Army Ammunition System ( SAAS ...FILE. 00 Cabat Service Support Model Development .,PASS TRANSLOG -- ARMY 21 0 Contract Number DAAK11-84-D-0004 Task Order #1 DRAFT REPOkT July 1984 D...Armament Systems, Inc. 211 West Bel Air Avenue P.O. Box 158 Aberdeen, MD 21001 8 8 8 2 1 S CORMIT SERVICE SUPPORT MODEL DEVELOPMENT BRASS -- TRANSLOG

SAFETY ALERT - Failure of brass non-return valves in gas point installations

CERN Multimedia

HSE Unit

2016-01-01

There have been three recent failures in brass non-return valves in separate high pressure gas point installations across CERN. Whilst each was in a different gas service, the visual nature of the failure has been similar.   In all three cases, these components were connected to stainless steel flexible connections and stainless steel pipework. From the metallurgical investigation of the failed component, it appears that the failure is linked to uncontrolled tightening, leading to a localised weakening resulting in premature failure when subjected to pressure. Lead levels in the examined components appear to be a contributing factor to the reduction in ductility but are not identified as the root cause. It has also not been possible to attribute failure to a particular batch of material. The Occupational Health & Safety and Environmental Protection Unit prescribes the following actions to be taken, aligned with the CERN Safety Rules: Verification of all brass non-return valves (prioritising...

Development of precipitation strengthened brass with Ti and Sn alloying elements additives by using water atomized powder via powder metallurgy route

Energy Technology Data Exchange (ETDEWEB)

Li, Shufeng, E-mail: shufengli@hotmail.com [Joining and Welding Research Institute, Osaka University, Osaka (Japan); Imai, Hisashi; Kondoh, Katsuyoshi [Joining and Welding Research Institute, Osaka University, Osaka (Japan); Kojima, Akimichi; Kosaka, Yoshiharu [San-Etsu Metals Co. LTD., 1892 OHTA, Tonami, Toyama (Japan); Yamamoto, Koji; Takahashi, Motoi [Nippon Atomized Metal Powders Corporation, 87-16, Nishi-Sangao, Noda, Chiba (Japan)

2012-08-15

Effect of Ti and Sn alloying elements on microstructure and mechanical properties of 60/40 brass has been studied via the powder metallurgy (P/M) route. The water-atomized BS40-0.6Sn1.0Ti (Cu40wt%Zn-0.6wt%Sn1.0wt%Ti) pre-alloyed powder was consolidated at various temperatures within range of 400-600 Degree-Sign C using spark plasma sintering (SPS) and hot extrusion was carried out at 500 Degree-Sign C. Effects of extrusion temperature on microstructure and tensile strength were investigated by employing SEM-EDS/EBSD, TEM, XRD and tensile test. Results indicated that super-saturated solid solution Ti and Sn elements created high chemical potential for a precipitate reaction in rapidly solidified brass powder, which showed significant strengthening effects on the extruded sample consolidated at lower temperature. Solid solubility of Ti in brass matrix decreased with increasing of sintering temperature, thus resulted in degradation of mechanical properties. Consequently, lower hot processing temperature is necessary to obtain excellent mechanical properties for BS40-0.6Sn1.0Ti during sintering and extrusion. An yield strength of 398 MPa and ultimate tensile strength of 615 MPa were achieved, they respectively showed 31.3% and 22.9% higher values than those of extruded Cu40Zn brass. -- Graphical abstract: The Ti and Sn alloying elements additions showed significant grain refinement on Cu40Zn-0.6Sn1.0Ti brass (b) as comparing with that of the conventional Cu40Zn brass (a), detected by electron backscatter diffraction (EBSD) technique. The grain boundaries maps of (a) BS40 (b) BS40-0.6Sn1.0Ti SPS compact sintered at 400 Degree-Sign C reveals by electron backscatter diffraction (EBSD) technique. Highlights: Black-Right-Pointing-Pointer Alloying elements Ti and Sn are proposed as additives in 60/40 brass. Black-Right-Pointing-Pointer Super-saturated Ti in powder creates high chemical potential for precipitation. Black-Right-Pointing-Pointer CuSn{sub 3}Ti{sub 5

X-ray fluorescence analysis of ancient and medieval brass artifacts from south Moravia

Czech Academy of Sciences Publication Activity Database

Hložek, M.; Komoróczy, Balázs; Trojek, T.

2012-01-01

Roč. 7, č. 70 (2012), s. 1250-1253 ISSN 0969-8043 Institutional research plan: CEZ:AV0Z80010507 Institutional support: RVO:68081758 Keywords : x-ray fluorescence analysis * brass * Moravia Subject RIV: AC - Archeology, Anthropology, Ethnology Impact factor: 1.179, year: 2012

Leaching and recovery of zinc and copper from brass slag by sulfuric acid

Directory of Open Access Journals (Sweden)

I.M. Ahmed

2016-09-01

Full Text Available Leaching and recovery processes for zinc and copper from brass slag by sulfuric acid were carried out and iron and aluminum were also precipitated as hydroxides in addition to silica gel. The factors affecting the performance and efficiency of the leaching processsuch as agitation rate, leaching time, acid concentration and temperature were separately investigated. The results obtained revealed that zinc and copper are successfully recovered from these secondary resources, where the percent recovery amounts to 95% and 99% for zinc and copper, respectively. The experimental data of this leaching process were well interpreted with the shrinking core model under chemically controlled processes. The apparent activation energy for the leaching of zinc has been evaluated using the Arrhenius expression. Based on the experimental results, a separation method and a flow sheet were developed and tested to separate zinc, copper, iron, aluminum and silica gel from the brass slag.

Phase stability of random brasses: pseudopotential theory revisited

International Nuclear Information System (INIS)

Rahman, S.M.M.

1987-06-01

We review the theoretical development concerning the phase stability of random brasses. The introductory discussion of the subject embraces the rules of metallurgy in general, but we emphasize on the roles of electron-per-atom ratio in the major bulk of our discussion. Starting from the so-called rigid-band model the discussion goes up to the recent higher-order pseudopotential theory. The theoretical refinements within the pseudopotential framework are discussed briefly. The stability criteria of the random phases are analysed both in the static lattice and dynamic lattice approximations. (author). 71 refs, figs and tabs

The Boundary Element Method Applied to the Two Dimensional Stefan Moving Boundary Problem

Science.gov (United States)

1991-03-15

Unc), - ( UGt )t - (UG,,),,] - (UG), If we integrate this equation with respect to r from 0 to t - c and with respect to and ij on the region 11(r...and others. "Moving Boundary Problems in Phase Change Mod- els," SIGNUM Newsletter, 20: 8-12 (1985). 21. Stefan, J. "Ober einige Probleme der Theorie ...ier Wirmelcitung," S.-B. \\Vein. Akad. Mat. Natur., 98: 173-484 (1889). 22.-. "flber (lie Theorie der Eisbildung insbesondere fiber die lisbildung im

Do wind and brass players snore less? A cross-sectional study of snoring and daytime fatigue in professional orchestral musicians.

Science.gov (United States)

Wardrop, P J C; Ravichandran, S; Hair, M; Robertson, S M; Sword, D

2011-04-01

To determine whether playing a wind or brass musical instrument is associated with reduced snoring or daytime fatigue. Cross-sectional, controlled, anonymous, questionnaire-based observational study. Rehearsal and performance halls. Three hundred and forty musicians from Scotland's five professional orchestras. Snore Outcomes Survey questionnaire and the Epworth Sleepiness Score. Hierarchical linear regression analysis. No significant difference was found between the snoring severity (Snore Outcomes Survey score) or daytime sleepiness (Epworth score) of wind/brass and other professional musicians. A regression model with snoring severity (Snore Outcomes Survey score) as the dependent variable and the three covariates of gender, age and body mass index as independent variables was significant [F(3, 206) = 28.77, P study demonstrated no significant difference between the snoring severity or daytime sleepiness of brass/wind players and other professional orchestral musicians. This result may have been attributed to comparatively low levels of snoring/daytime sleepiness in the population studied. The findings contrast with previous studies examining the effects of singing and didgeridoo playing but concur with a recent similar study of orchestral musicians. A prospective interventional study would be required to determine whether playing a wind or brass instrument improves these variables in patients complaining of disruptive snoring. © 2011 Blackwell Publishing Ltd.

Compatibility studies of copper, brass and cupronickel with Hytherm-500 thermofluid

International Nuclear Information System (INIS)

Pujar, M.G.; Dayal, R.K.; Gnanamoorthy, J.B.

1989-01-01

Carbon steel used as a structural material in thermofluid/water heat exchangers in the Fast Breeder Test Reactor (FBTR) got perforated resulting in leakage. To suggest an alternative better corrosion resistant material for these exchangers, corrosion resistance studies of copper based alloy systems in both a s received and pickled conditions were carried out in the thermofluid medium (Hytherm-500) at room temperature (∼298 K), 373 K and 423 K upto 500 h duration. The tested materials, copper, admiralty brass and 70/30 cupronickel were found to have excellent corrosion resistance in both as-received and pickled conditions. In all the cases corrosion rates decreased with increased duration of exposure. All the above materials showed better corrosion resistance in pickled condition compared to that in as-received condition. The relative corrosion resistance of these three alloys was as follows: admiralty brass > cop per > cupronickel. This trend in the corrosion resistance was observed in both as-received and pickled conditions. In general, the corrosion resistance in pickled condition was found to be better than that in as-received condition. (author). 3 refs., 3 figs., 2 tabs

76 FR 11509 - Brass Sheet and Strip From France, Germany, Italy, and Japan

Science.gov (United States)

2011-03-02

...)] Brass Sheet and Strip From France, Germany, Italy, and Japan AGENCY: United States International Trade... and strip from France, Germany, Italy, and Japan. SUMMARY: The Commission hereby gives notice that it... France, Germany, Italy, and Japan would be likely to lead to continuation or recurrence of material...

The void nucleation mechanism within lead phase during spallation of leaded brass

Science.gov (United States)

Yang, Yang; Wang, Can; Chen, Xingzhi; Chen, Kaiguo; Hu, Haibo; Fu, Yanan

2018-07-01

The incipient spall behaviours of Cu-34%Zn-3%Pb leaded brass samples with annealed and cryogenic-treated conditions were loaded using one-stage light gas gun experiments. The effect of Pb-phase on dynamic damage nucleation in leaded brass specimens was investigated by means of optical microscopy, scanning electron microscopy and x-ray computer tomography. It was found that the voids of incipient spall were mainly nucleated in the interior of the lead (no tensile stress would be produced within lead according to the impact theory) instead of nucleated at the phase interface as expected by quasi-static damage fracture theory. A nucleation model is proposed in the present work that is the asymmetry high compression zones in the centre of the lead-phase were formed by the rarefaction wave convergence effects of matrix/quasi-spherical lead interface, which caused adiabatic temperature rise that exceeded melting point of lead due to severe plastic deformation, finally led to local melting and void nucleation. In addition, the spall strength and damage rate increased with the increase in the Pb-phase number.

The vibrational and configurational entropy of α-brass

International Nuclear Information System (INIS)

Benisek, Artur; Dachs, Edgar; Salihović, Miralem; Paunovic, Aleksandar; Maier, Maria E.

2014-01-01

Highlights: • The heat capacity of two α-brass samples was measured from T = 5 K to 300 K. • Above T = 300 K, the ordering/disordering processes were investigated calorimetrically. • The vibrational and configurational entropies of α-brass were calculated. • A volume vs. bulk modulus approach describing the excess entropy was tested. -- Abstract: The heat capacities of two samples of a fcc Cu–Zn alloy with the composition CuZn15 and CuZn34 were measured from T = 5 K to 573 K using relaxation and differential scanning calorimetry. Below ∼90 K, they are characterised by negative excess heat capacities deviating from ideal mixing by up to −0.20 and −0.44 J · mol −1 · K −1 for CuZn15 and CuZn34, respectively. The excess heat capacities produce excess vibrational entropies, which are less negative compared to the excess entropy available from the literature. Since the literature entropy data contain both, the configurational and the vibrational part of the entropy, the difference is attributed to the excess configurational entropy. The thermodynamics of different short-range ordered samples was also investigated. The extent of the short-range order had no influence on the heat capacity below T = 300 K. Above T = 300 K, where the ordering changed during the measurement, the heat capacity depended strongly on the thermal history of the samples. From these data, the heat and entropy of ordering was calculated. The results on the vibrational entropy of this study were also used to test a relationship for estimating the excess vibrational entropy of mixing

Analysis of metals with luster: Roman brass and silver

Energy Technology Data Exchange (ETDEWEB)

Fajfar, H., E-mail: helena.fajfar@ijs.si [Jožef Stefan Institute, Jamova 39, SI-1000 Ljubljana (Slovenia); Jožef Stefan International Postgraduate School, Jamova 39, SI-1000 Ljubljana (Slovenia); Rupnik, Z. [Jožef Stefan Institute, Jamova 39, SI-1000 Ljubljana (Slovenia); Šmit, Ž. [Jožef Stefan Institute, Jamova 39, SI-1000 Ljubljana (Slovenia); Faculty of Mathematics and Physics, University of Ljubljana, Jadranska 19, SI-1000 Ljubljana (Slovenia)

2015-11-01

Non-destructive PIXE analysis using in-air proton beam was used for the studies of earliest brass coins issued during the 1st century BC by Greek cities in Asia Minor, Romans and Celts, and for the studies of plated low grade silver coins of the 3rd century AD. The analysis determined the levels of zinc and important trace elements, notably selenium, which confirms spread of selenium-marked copper from the east. For plating, combined tinning and silvering was identified by the mapping technique for the mid 3rd century AD, which evolved into mere plating by 270 AD.

Analysis of metals with luster: Roman brass and silver

International Nuclear Information System (INIS)

Fajfar, H.; Rupnik, Z.; Šmit, Ž.

2015-01-01

Non-destructive PIXE analysis using in-air proton beam was used for the studies of earliest brass coins issued during the 1st century BC by Greek cities in Asia Minor, Romans and Celts, and for the studies of plated low grade silver coins of the 3rd century AD. The analysis determined the levels of zinc and important trace elements, notably selenium, which confirms spread of selenium-marked copper from the east. For plating, combined tinning and silvering was identified by the mapping technique for the mid 3rd century AD, which evolved into mere plating by 270 AD.

Memorias de un judío: el mundo visto por Stefan Zweig

OpenAIRE

Kênia Maria de Almeida Pereira

2011-01-01

El artículo traza el periplo vital e ideológico del escritor Stefan Zweig a partir de su libro El mundo que yo vi: mis memorias, de 1942. Se esboza la visión del fascismo que tuvo el intelectual, el drama del Holocausto y los terrores de la política antisemita de Adolfo Hitler a partir de la Segunda Guerra Mundial, a la vez que se formulan interrogantes sobre la política brasileña de la era de Getúlio Vargas respecto al fascismo. El texto desvela los misterios de la pasión, la vida y la muert...

Annual report of the Jozef Stefan Institute for 1987

International Nuclear Information System (INIS)

Gams, M.

1988-06-01

This report presents the main features of the Josef Stefan Institute work in the course of the year 1987. The research projects and activities of the Institute are described in detail in the following fields: physics (theoretical, nuclear, solid state and reactor physics), chemistry (nuclear, physical, analytical, high temperature, fluorine chemistry, ceramics and biochemistry), electronics (automation, biocybernetics, robotics, computer science and information science, energy and process control and professional electronics), reactor engineering and safety, and applied mathematics and many interdisciplinary projects resulting from these fields. Special attention is paid to those fields and programmes which are important to the growth and development of the national economy. In addition, the operational structure of the Institute and its budget are also mentioned. The document contains a list of the project titles which the Institute coordinates. There is another list of printed material (journal articles, thesis, conference papers, etc.) written by researchers of the Institute. (Z.Z.). 1260 refs

Annual Report of the Jozef Stefan Institute for 1989

International Nuclear Information System (INIS)

Gams, M.

1990-05-01

This report presents the main features of the Josef Stefan Institute work in the course of the year 1989. The research projects and activities of the Institute are described in detail in the following fields: physics (theoretical, nuclear, condensed matter, thin films and surfaces, solid states and reactor physics), chemistry (nuclear, physical, analytical, high temperature, fluorine chemistry, ceramics and biochemistry), electronics (automation, biocybernetics, robotics, computer science and information science, energy process control and professional electronics), reactor enineering and safety, and applied mathematics, and many interdisciplinary projects resulting from these fields. Special attention is paid to those fields and programmes which are important to the growth and development of the national economy. In addition, the operational structure of the Institute and its budget are also mentioned. The document contains a list of the project titles which the Institute coordinates. There is another list of printed material (journal articles, thesis, conference papers, etc.) written by researchers of the Institute. (Z.Z.) 151 refs.; 69 figs., 8 tabs

Oxygen Compatibility of Brass-Filled PTFE Compared to Commonly Used Fluorinated Polymers for Oxygen Systems

Science.gov (United States)

Herald, Stephen D.; Frisby, Paul M.; Davis, Samuel Eddie

2009-01-01

Safe and reliable seal materials for high-pressure oxygen systems sometimes appear to be extinct species when sought out by oxygen systems designers. Materials that seal well are easy to find, but these materials are typically incompatible with oxygen, especially in cryogenic liquid form. This incompatibility can result in seals that leak, or much worse, seals that easily ignite and burn during use. Materials that are compatible with oxygen are easy to find, such as the long list of compatible metals, but these metallic materials are limiting as seal materials. A material that seals well and is oxygen compatible has been the big game in the designer's safari. Scientists at the Materials Combustion Research Facility (MCRF), part of NASA/Marshall Space Flight Center (MSFC), are constantly searching for better materials and processes to improve the safety of oxygen systems. One focus of this effort is improving the characteristics of polymers used in the presence of an oxygen enriched environment. Very few systems can be built which contain no polymeric materials; therefore, materials which have good impact resistance, low heat of combustion, high auto-ignition temperature and that maintain good mechanical properties are essential. The scientists and engineers at the Materials Combustion Research Facility, in cooperation with seal suppliers, are currently testing a new formulation of polytetrafluoroethylene (PTFE) with Brass filler. This Brass-filled PTFE is showing great promise as a seal and seat material for high pressure oxygen systems. Early research has demonstrated very encouraging results, which could rank this material as one of the best fluorinated polymers ever tested. This paper will compare the data obtained for Brass-filled PTFE with other fluorinated polymers, such as TFE-Teflon (PTFE) , Kel-F 81, Viton A, Viton A-500, Fluorel , and Algoflon . A similar metal filled fluorinated polymer, Salox-M , was tested in comparison to Brass-filled PTFE to

A metallurgical and mechanical study on dissimilar Friction Stir welding of aluminum 1050 to brass (CuZn30)

International Nuclear Information System (INIS)

Esmaeili, A.; Givi, M.K. Besharati; Rajani, H.R. Zareie

2011-01-01

Highlights: → Brass and aluminum 1050 are joined for the first time through Friction Stir welding. → Welding parameters are optimized to obtain a sound joint. → The ultimate tensile strength of the sound joint reaches 80% of aluminum base metal. → The effect of interfacial intermetallic compounds on mechanical properties is probed. → CuZn, Cu9Al4 and CuAl2 form the majority of observed intermetallic compounds. - Abstract: In this research, the effect of Friction Stir welding parameters on mechanical and metallurgical properties of aluminum 1050/brass (70%Cu-30%Zn) joints was investigated. Optical microscopy, SEM, X-ray diffraction analysis and EDS analysis were used to probe microstructures and chemical compositions. In order to examine mechanical properties, besides hardness test, tensile strength of the welds was measured. The main parameters in this study were the tool rotational speed, offset, welding speed, and depth of the sinking pin. The maximum ultimate tensile strength of the joint reached in this research was 80% of the base metal (aluminum). Results show that the optimum parameters will yield a defect free joint arisen from a suitable material flow and a narrow multilayer intermetallic compound at interface in addition to a composite structure in the stir zone which all result in a strong joint. Also, by leaving the optimized condition, occurrence of large brass fragments and weld defects lower weld strength besides shifting fracture path from interface to the stir zone. Also, according to the results, using low rotation speed is accompanied by disappearance of interfacial intermetallic layer, whereas fast rotation will thicken this layer. Moreover, severe mechanical twining is observed in TMAZ of brass which leads to high values of hardness in this region.

Brasil, um país do futuro: projeções religiosas e leituras sobre um mote de Stefan Zweig

Directory of Open Access Journals (Sweden)

Vinicius Mariano de Carvalho

2009-05-01

Full Text Available Este artigo propõe-se a fazer uma leitura da obra Brasil, um país do futuro, do escritor vienense Stefan Zweig, ressaltando o quanto o discurso empregado pelo autor está revestido de certo aspecto profético quando fala do Brasil. Seu desejo de querer ver no Brasil da década de 1940 uma terra livre das intolerâncias e violências que assolavam a Europa de então, fustigada pela 2ª Guerra Mundial, fez com que Zweig revivesse a imagem mitológica de que o Brasil era uma terra paradisíaca, um éden reencontrado. A descrição que faz do Brasil, mais que otimista, adquire um aspecto profético quando o autor reforça que a harmonia e paz reinantes no país faziam deste o locus para o acontecimento de um futuro utópico, messiânico. Curiosamente o escritor/profeta, muitas vezes, trai suas profecias, projetando no Brasil valores de sua Europa e às vezes chega mesmo a se contradizer no que tange à questão da tolerância e harmonia que via no Brasil.Palavras-chave: Stefan Zweig; Literatura de viagem; Profetismo; Intolerância; Messianismo.ABSTRACTThis article makes a reading of Viennese writer Stefan Zweig’s book Brasil, um país do futuro (Brazil, a country of the future, pointing out how far the author’s discourse is endowed with certain prophetical aspects when it refers to Brazil. His desire to see Brazil, in the 40’s, as a land free from the intolerance and violence that devastated Europe during World War II made Zweig revive the mythological image of the country as a paradisiacal land, a rediscovered Eden. His description of Brazil, rather than optimistic, acquires a prophetical aspect when he emphasizes the fact that the prevailing harmony and peace of the country made it a locus for the advent of a messianic and utopian future. Curiously, the writer/prophet often betrayed his prophecies, projecting in Brazil old European values, and sometimes contradicting himself as to the issue of tolerance and harmony that he witnessed in

Modelling of simultaneous mass and heat transfer with chemical reaction using the Maxwell-Stefan theory II. Non-isothermal study

NARCIS (Netherlands)

Frank, M.J.W.; Kuipers, J.A.M.; Krishna, R.; van Swaaij, W.P.M.

1995-01-01

In Part I a general applicable model has been developed which calculates mass and heat transfer fluxes through a vapour/gas-liquid interface in case a reversible chemical reaction with associated heat effect takes place in the liquid phase. In this model the Maxwell-Stefan theory has been used to

Laser cleaning of varnishes and contaminants on brass

Energy Technology Data Exchange (ETDEWEB)

Mateo, M.P.; Ctvrtnickova, T. [Universidad de A Coruna, Dpto. Ingenieria Industrial II, C/ Mendizabal s/n, 15403 Ferrol (Spain); Fernandez, E.; Ramos, J.A. [Instituto Tecnologico de Optica Color e Imagen, AIDO, Dpto. Laser, Valencia (Spain); Yanez, A. [Universidad de A Coruna, Dpto. Ingenieria Industrial II, C/ Mendizabal s/n, 15403 Ferrol (Spain); Nicolas, G. [Universidad de A Coruna, Dpto. Ingenieria Industrial II, C/ Mendizabal s/n, 15403 Ferrol (Spain)], E-mail: gines@cdf.udc.es

2009-03-01

The capability of laser ablation to perform controlled cleaning of varnishes containing contaminants and paints used by restorers in artistic objects from brass samples while keeping unaltered the finish structure is demonstrated in this work. Adequate laser energy per pulse and number of laser shots required to perform a suitable cleaning by laser ablation have been optimized. The inspection of the samples before and after the cleaning process by optical microscopy and by Fourier transform infrared spectroscopy (FTIR) technique demonstrated that the finish structure of the surface was intact while the coatings were completely eliminated. Furthermore, a laser-induced plasma spectroscopy (LIBS)-based detection system was applied during the irradiation process for the analysis of the material removal and also for its monitoring.

Laser cleaning of varnishes and contaminants on brass

International Nuclear Information System (INIS)

Mateo, M.P.; Ctvrtnickova, T.; Fernandez, E.; Ramos, J.A.; Yanez, A.; Nicolas, G.

2009-01-01

The capability of laser ablation to perform controlled cleaning of varnishes containing contaminants and paints used by restorers in artistic objects from brass samples while keeping unaltered the finish structure is demonstrated in this work. Adequate laser energy per pulse and number of laser shots required to perform a suitable cleaning by laser ablation have been optimized. The inspection of the samples before and after the cleaning process by optical microscopy and by Fourier transform infrared spectroscopy (FTIR) technique demonstrated that the finish structure of the surface was intact while the coatings were completely eliminated. Furthermore, a laser-induced plasma spectroscopy (LIBS)-based detection system was applied during the irradiation process for the analysis of the material removal and also for its monitoring

Conceptual design of a clinical BNCT beam in an adjacent dry cell of the Jozef Stefan Institute TRIGA reactor

NARCIS (Netherlands)

Maucec, M

The MCNP4B Monte Carlo transport code is used in a feasibility study of the epithermal neutron boron neutron capture therapy facility in the thermalizing column of the 250-kW TRIGA Mark II reactor at the Jozef Stefan Institute (JSI). To boost the epithermal neutron flux at the reference irradiation

Symmetry analysis and exact solutions of one class of (1+3)-dimensional boundary-value problems of the Stefan type

OpenAIRE

Kovalenko, S. S.

2014-01-01

We present the group classification of one class of (1+3)-dimensional nonlinear boundary-value problems of the Stefan type that simulate the processes of melting and evaporation of metals. The results obtained are used for the construction of the exact solution of one boundary-value problem from the class under study.

Conceptual design of a clinical BNCT beam in an adjacent dry cell of the Jozef Stefan Institute TRIGA reactor

NARCIS (Netherlands)

Maucec, M

2000-01-01

The MCNP4B Monte Carlo transport code is used in a feasibility study of the epithermal neutron boron neutron capture therapy facility in the thermalizing column of the 250-kW TRIGA Mark II reactor at the Jozef Stefan Institute (JSI). To boost the epithermal neutron flux at the reference irradiation

Fabrication and properties of high-strength extruded brass using elemental mixture of Cu-40% Zn alloy powder and Mg particle

Energy Technology Data Exchange (ETDEWEB)

Atsumi, Haruhiko, E-mail: atsumi-h@jwri.osaka-u.ac.jp [Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871 (Japan); Imai, Hisashi; Li, Shufeng; Kondoh, Katsuyoshi [Joining and Welding Research Institute, Osaka University, 11-1 Mihogaoka, Ibaraki, Osaka 567-0047 (Japan); Kousaka, Yoshiharu; Kojima, Akimichi [San-etsu Metals Co. Ltd., 1892 Ohta, Tonami, Toyama 939-1315 (Japan)

2012-08-15

In this paper, high-strength brass (Cu-40% Zn) alloy with magnesium (Mg) element was fabricated via powder technology process, and the effect of the additive Mg element on microstructural and mechanical properties of extruded brass alloys with {alpha}-{beta} duplex phases was investigated. Pre-mixed Cu-40% Zn alloy powder with 0.5-1.5 mass% pure Mg powder (Cu-40% Zn + Mg) was consolidated using a spark plasma sintering (SPS) equipment. SPSed Cu-40% Zn + Mg specimens consisted of {alpha}-{beta} duplex phases containing Mg(Cu{sub 1-x}Zn{sub x}){sub 2} intermetallic compounds (IMCs) with a mean particle size of 10-30 {mu}m in diameter. The IMCs were completely dissolved in the {alpha}-{beta} duplex phases by a heat-treatment at 973 K for 15 min; thus, in order to disperse fine IMCs on {alpha}-{beta} duplex phase matrix, the SPSed Cu-40% Zn + Mg specimens were pre-heated at the solid solutionizing condition, and immediately extruded. The extruded specimen exhibited fine {alpha}-{beta} duplex phases, containing very fine precipitates of the above Mg(Cu{sub 1-x}Zn{sub x}){sub 2} IMCs with 0.5-3.0 {mu}m in diameter. In particular, a mean grain size of the extruded Cu-40% Zn + 1.0% Mg specimen was 3.32 {mu}m analyzed using an electron back-scattered diffraction. Tensile properties of the extruded Cu-40% Zn + 1.0% Mg specimen were an average value of yield strength (YS): 328 MPa, ultimate tensile strength (UTS): 553 MPa, and 25% elongation. This indicated that the extruded Cu-40% Zn + 1.0% Mg specimen revealed the significantly high-strength properties compared to a conventional binary brass alloy with 229 MPa YS and 464 MPa UTS. A high strengthening mechanism of this wrought brass alloy was mainly due to the grain refinement because of a pinning effect by the fine Mg(Cu{sub 1-x}Zn{sub x}){sub 2} precipitates at the boundaries of each phase. -- Highlights: Black-Right-Pointing-Pointer New high-strength extruded brass alloy with Mg was fabricated via powder metallurgy. Black

Exact solution for a two-phase Stefan problem with variable latent heat and a convective boundary condition at the fixed face

Science.gov (United States)

Bollati, Julieta; Tarzia, Domingo A.

2018-04-01

Recently, in Tarzia (Thermal Sci 21A:1-11, 2017) for the classical two-phase Lamé-Clapeyron-Stefan problem an equivalence between the temperature and convective boundary conditions at the fixed face under a certain restriction was obtained. Motivated by this article we study the two-phase Stefan problem for a semi-infinite material with a latent heat defined as a power function of the position and a convective boundary condition at the fixed face. An exact solution is constructed using Kummer functions in case that an inequality for the convective transfer coefficient is satisfied generalizing recent works for the corresponding one-phase free boundary problem. We also consider the limit to our problem when that coefficient goes to infinity obtaining a new free boundary problem, which has been recently studied in Zhou et al. (J Eng Math 2017. https://doi.org/10.1007/s10665-017-9921-y).

Structural and phase transformations in zinc and brass wires under heating with high-density current pulse

Energy Technology Data Exchange (ETDEWEB)

Pervikov, A. V. [Laboratory of Physical Chemistry of Ultrafine Materials, Institute of Strength Physics and Materials Science, 2/4, pr. Akademicheskii, 634021 Tomsk, Russia and Department of High Voltage Electrophysics and High Current Electronics, Tomsk Polytechnic University, 30 Lenin Avenue, 634050 Tomsk (Russian Federation)

2016-06-15

The work is focused on revealing the mechanism of structure and phase transformations in the metal wires under heating with a high-density current pulse (the electric explosion of wires, EEWs). It has been demonstrated on the example of brass and zinc wires that the transition of a current pulse with the density of j ≈ 3.3 × 10{sup 7} A/cm{sup 2} results in homogeneous heating of the crystalline structure of the metal/alloy. It has been determined that under heating with a pulse of high-density current pulse, the electric resistance of the liquid phases of zinc and brass decreases as the temperature increases. The results obtained allow for a conclusion that the presence of the particles of the condensed phase in the expanding products of EEW is the result of overheating instabilities in the liquid metal.

Annual report of the Jozef Stefan Institute for 1988

International Nuclear Information System (INIS)

Gams, M.

1989-07-01

This report presents the main features of the Jozef Stefan Institute work in the course of the year 1988. The research projects and activities of the Institute are described in detail in the following fields: physics (theoretical, unclear, condensed matter, thin films and surfaces, solid states and reactor physics), chemistry (nuclear, physical, analytical, high temperature, fluorine chemistry, ceramics and biochemistry), electronics (automation, biocybernetics, robotics, computer science and information science, energy and process control and professional electronics), reactor engineering and safety, and applied mathematics and many interdisciplinary projects resulting from these fields. Special attention is paid to those fields and programmes which are important to the growth and development of the national economy. In addition, the operational structure of the Institute and its budget are also mentioned. The document contains a list of the project titles which the Institute coordinates. There is another list of printed material (journal articles, thesis, conference papers, etc.) written by researchers of the Institute. (Z.Z.). 1380 refs.; 43 figs.; 8 tabs.; 14 diags

[Intellectual exchange between Germany and Latin America: an interview with Stefan Rinke].

Science.gov (United States)

Rinke, Stefan; da Silva, André Felipe Cândido; Junghans, Miriam; Cavalcanti, Juliana Manzoni; de Muñoz, Pedro Felipe Neves

2014-01-01

Current and former students of the Casa de Oswaldo Cruz/Fiocruz interviewed German historian Stefan Rinke, of the Freie Universität Berlin, who specializes in examining the historical development of Latin America as it fits into the international context. Rinke's work uses dimensions such as economic and diplomatic relations, migratory flows, and ethnic conflict as tools in his analyses of the networks of interdependence that have tied Latin America to Europe and the USA. His lens goes beyond the Latin American continent to approach globalization as a historical process, with national and regional contexts placed within a general framework. In this interview, Rinke talks about his academic career, global and transnational history, and joint projects between Germany and Latin America.

Science Information Centre and Nuclear Library of 'Jozef Stefan' Institute, Ljubljana, Slovenia

International Nuclear Information System (INIS)

Stante, A.; Smuc, S.

2006-01-01

The 'Jozef Stefan' Institute Science Information Centre is the central Slovene physics library and one of the largest special libraries in Slovenia. Our collection covers the fields of physics, chemistry, biochemistry, electronics, information science, artificial intelligence, energy management, environmental science, material science, robotics etc. The Nuclear Library at the Reactor Centre Podgorica is a part of the Science Information Centre. It collects and keeps literature from the field of reactor and nuclear energy and provides information to scientists employed at the Reactor Centre and users from the Nuclear Power Plant Krsko as well as other experts dealing with nuclear science and similar fields. The orders subscribed are sent by the Science Information Centre to other libraries included in inter-library lending in Slovenia and abroad. (author)

Surface integrity evaluation of brass CW614N after impact of acoustically\

Czech Academy of Sciences Publication Activity Database

Lehocká, D.; Klich, Jiří; Foldyna, Josef; Hloch, Sergej; Hvizdoš, P.; Fides, M.; Botko, F.; Cárach, J.

2016-01-01

Roč. 149, č. 149 (2016), s. 236-244 E-ISSN 1877-7058. [International Conference on Manufacturing Engineering and Materials, ICMEM 2016. Nový Smokovec, 06.06.2016-10.06.2016] R&D Projects: GA MŠk(CZ) LO1406; GA MŠk ED2.1.00/03.0082 Institutional support: RVO:68145535 Keywords : pulsating water jet * surface integrity * mass material removal * brass * nanoindentation Subject RIV: JQ - Machines ; Tools http://www.sciencedirect.com/science/article/pii/S1877705816311705

Maxwell-Stefan diffusion: a framework for predicting condensed phase diffusion and phase separation in atmospheric aerosol

Science.gov (United States)

Fowler, Kathryn; Connolly, Paul J.; Topping, David O.; O'Meara, Simon

2018-02-01

The composition of atmospheric aerosol particles has been found to influence their micro-physical properties and their interaction with water vapour in the atmosphere. Core-shell models have been used to investigate the relationship between composition, viscosity and equilibration timescales. These models have traditionally relied on the Fickian laws of diffusion with no explicit account of non-ideal interactions. We introduce the Maxwell-Stefan diffusion framework as an alternative method, which explicitly accounts for non-ideal interactions through activity coefficients. e-folding time is the time it takes for the difference in surface and bulk concentration to change by an exponential factor and was used to investigate the interplay between viscosity and solubility and the effect this has on equilibration timescales within individual aerosol particles. The e-folding time was estimated after instantaneous increases in relative humidity to binary systems of water and an organic component. At low water mole fractions, viscous effects were found to dominate mixing. However, at high water mole fractions, equilibration times were more sensitive to a range in solubility, shown through the greater variation in e-folding times. This is the first time the Maxwell-Stefan framework has been applied to an atmospheric aerosol core-shell model and shows that there is a complex interplay between the viscous and solubility effects on aerosol composition that requires further investigation.

78 FR 56656 - Brass Sheet and Strip From France: Rescission of Antidumping Duty Administrative Review; 2012-2013

Science.gov (United States)

2013-09-13

... DEPARTMENT OF COMMERCE International Trade Administration [A-427-602] Brass Sheet and Strip From..., International Trade Administration, Department of Commerce. DATES: Effective Date: September 13, 2013. FOR... Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution...

Stefan-Maxwell Relations and Heat Flux with Anisotropic Transport Coefficients for Ionized Gases in a Magnetic Field with Application to the Problem of Ambipolar Diffusion

Science.gov (United States)

Kolesnichenko, A. V.; Marov, M. Ya.

2018-01-01

The defining relations for the thermodynamic diffusion and heat fluxes in a multicomponent, partially ionized gas mixture in an external electromagnetic field have been obtained by the methods of the kinetic theory. Generalized Stefan-Maxwell relations and algebraic equations for anisotropic transport coefficients (the multicomponent diffusion, thermal diffusion, electric and thermoelectric conductivity coefficients as well as the thermal diffusion ratios) associated with diffusion-thermal processes have been derived. The defining second-order equations are derived by the Chapman-Enskog procedure using Sonine polynomial expansions. The modified Stefan-Maxwell relations are used for the description of ambipolar diffusion in the Earth's ionospheric plasma (in the F region) composed of electrons, ions of many species, and neutral particles in a strong electromagnetic field.

Axial vibrations of brass wind instrument bells and their acoustical influence: Theory and simulations.

Science.gov (United States)

Kausel, Wilfried; Chatziioannou, Vasileios; Moore, Thomas R; Gorman, Britta R; Rokni, Michelle

2015-06-01

Previous work has demonstrated that structural vibrations of brass wind instruments can audibly affect the radiated sound. Furthermore, these broadband effects are not explainable by assuming perfect coincidence of the frequency of elliptical structural modes with air column resonances. In this work a mechanism is proposed that has the potential to explain the broadband influences of structural vibrations on acoustical characteristics such as input impedance, transfer function, and radiated sound. The proposed mechanism involves the coupling of axial bell vibrations to the internal air column. The acoustical effects of such axial bell vibrations have been studied by extending an existing transmission line model to include the effects of a parasitic flow into vibrating walls, as well as distributed sound pressure sources due to periodic volume fluctuations in a duct with oscillating boundaries. The magnitude of these influences in typical trumpet bells, as well as in a complete instrument with an unbraced loop, has been studied theoretically. The model results in predictions of input impedance and acoustical transfer function differences that are approximately 1 dB for straight instruments and significantly higher when coiled tubes are involved or when very thin brass is used.

Leaching and recovery of zinc and copper from brass slag by sulfuric acid

OpenAIRE

Ahmed, I.M.; Nayl, A.A.; Daoud, J.A.

2016-01-01

Leaching and recovery processes for zinc and copper from brass slag by sulfuric acid were carried out and iron and aluminum were also precipitated as hydroxides in addition to silica gel. The factors affecting the performance and efficiency of the leaching processsuch as agitation rate, leaching time, acid concentration and temperature were separately investigated. The results obtained revealed that zinc and copper are successfully recovered from these secondary resources, where the percent r...

APPLICATION OF SCANNING ELECTRON MICROSCOPE EQUIPPED WITH THE MICROANALYSIS SYSTEM FOR INVESTIGATION OF BRASS COVERING

Directory of Open Access Journals (Sweden)

T. P. Kurenkova

2010-01-01

Full Text Available The possibilities of application of scanning electronic microscope equipped with microanalysis system for investigation of the brass covering quality by slug for production of wire and metal cord particularly of change of copper concentration by covering thickness and slug perimeter, revealing of ?-phase allocation presence and character, determination of defect reasons, are shown.

3 MeV proton irradiation effects on surface, structural, field emission and electrical properties of brass

Science.gov (United States)

Ali, Mian Ahsan; Bashir, Shazia; Akram, Mahreen; Mahmood, Khaliq; Faizan-ul-Haq; Hayat, Asma; Mutaza, G.; Chishti, Naveed Ahmed; Khan, M. Asad; Ahmad, Shahbaz

2018-05-01

Ion-induced modifications of brass in terms of surface morphology, elemental composition, phase changes, field emission properties and electrical conductivity have been investigated. Brass targets were irradiated by proton beam at constant energy of 3 MeV for various doses ranges from 1 × 1012 ions/cm2 to 1.5 × 1014 ions/cm2 using Pelletron Linear Accelerator. Field Emission Scanning Electron Microscope (FESEM) analysis reveals the formation of randomly distributed clusters, particulates, droplets and agglomers for lower ion doses which are explainable on the basis of cascade collisional process and thermal spike model. Whereas, at moderate ion doses, fiber like structures are formed due to incomplete melting. The formation of cellular like structure is observed at the maximum ion dose and is attributed to intense heating, melting and re-solidification. SRIM software analysis reveals that the penetration depth of 3 MeV protons in brass comes out to be 38 μm, whereas electronic and nuclear energy losses come out to be 5 × 10-1 and 3.1 × 10-4 eV/Å respectively. The evaluated values of energy deposited per atom vary from 0.01 to 1.5 eV with the variation of ion doses from 1 × 1012 ions/cm2 to 1.5 × 1014 ions/cm2. Both elemental analysis i.e. Energy Dispersive X-ray spectroscopy (EDX) and X-ray Diffraction (XRD) supports each other and no new element or phase is identified. However, slight change in peak intensity and angle shifting is observed. Field emission properties of ion-structured brass are explored by measuring I-V characteristics of targets under UHV condition in diode-configuration using self designed and fabricated setup. Improvement in field enhancement factor (β) is estimated from the slope of Fowler-Nordheim (F-N) plots and it shows significant increase from 5 to 1911, whereas a reduction in turn on field (Eo) from 65 V/μm to 30 V/μm and increment in maximum current density (Jmax) from 12 μA/cm2 to 3821 μA/cm2 is observed. These enhancements

Interview about nuclear regulatory supervision with Stefan Mappus, Baden-Wuerttemberg State Minister for the Environment and for Transport; Interview zur Kernenergieaufsicht mit Stefan Mappus, Minister fuer Umwelt und Verkehr des Landes Baden-Wuerttemberg

Energy Technology Data Exchange (ETDEWEB)

Anon.

2005-02-01

Stefan Mappus, member of the Baden-Wuerttemberg State Parliament, has been State Minister for the Environment since July 14, 2004. He has criticized deficiencies in nuclear power plants, but also has expressed himself in favor of continuing to use nuclear power. This interview covers the safety of nuclear power plants in Baden-Wuerttemberg; the fines to be imposed within the framework of nuclear regulatory supervision; and ''new accents'' in supervision, among others. Mr. Mappus also comments on the activities of his Ministry in connection with events at the Philippsburg nuclear power station and the consequences drawn by the regulatory authority. (orig.)

Ordering and structural vacancies in non-stoichiometric Cu-Al γ brasses

International Nuclear Information System (INIS)

Kisi, E.H.; Browne, J.D.

1991-01-01

γ-Brass structures are based on the cubic packing of 26-atom clusters which have, as concentric subunits, an inner and an outer tetrahedron (IT, OT), an octahedron (OH) and a cuboctahedron (CO). Cu 9 Al 4 [M r = 679.37, P43m, a = 8.7046(1) A, V = 659.5 A 3 , Z = 4, D x = 6.846 Mg m -3 , R wp = 0.051, R B = 0sun017 for 238 powder reflections] is the stoichiometric γ brass of the Cu-Al system and contains two clusters (A, B) per unit cell. Al atoms occupy a 4(e) (IT) site in cluster A and a 12(i) (CO) site in cluster B. Cu atoms occupy the remaining 4(e) (OT), 6(f) (OH) and 12(i) (CO) sites of cluster A and the two 4(e) (IT, OT) and a 6(g) (OH) site of cluster B. The structure has considerable solubility for Al and this paper contains a systematic neutron powder diffraction study of the changes in the Cu 9 Al 4 structure at 295 K (λ = 1.376 A) and 77 K(λ = 1.500 A) as Al is added. The structure was found to remain cubic for compositions Cu 8.93 Al 4.08 , Cu 8.83 , Al 4.17 , Cu 8.75 Al 4.25 and Cu 8.58 Al 4.42 . At Cu 8.30 Al 4.58 the structure was slightly distorted to an undetermined symmetry. For Cu 8.03 Al 4.68 and Cu 7.55 Al 4.80 the structure was found to be rhombohedral [M r = 636.57, R3m, a = 8.7066(1) A, α = 89.74(1) deg, V = 660.0(1) A 3 , Z = , D x = 6.406, D m = 6.41 Mg m -3 , R wp = 0.064, R B = 0.025 for 702 reflections; and M r = 609.31, R3m, a = 8.6884(1) A, α = 89.78(1) deg, V = 655.9(1) A 3 , Z = 4, D x = 6.170, D m = 6.18 Mg m -3 , R wp = 0.064, R B = 0.027 for 789 reflections, respectively]. The non-cubic structures contain sufficient structural vacancies to maintain a classical valence content of 88 electrons per unit cell. Refined structures are presented for all of the above compositions, except Cu 8.30 Al 4.58 , and the results discussed in terms of current γ-brass stability theories. (orig.)

Effect of Brass Interlayer Sheet on Microstructure and Joint Performance of Ultrasonic Spot-Welded Copper-Steel Joints

Science.gov (United States)

Satpathy, Mantra Prasad; Kumar, Abhishek; Sahoo, Susanta Kumar

2017-07-01

Solid-state ultrasonic spot welding (USW) inevitably offers a potential solution for joining dissimilar metal combination like copper (Cu) and steel (SS). In this study, the USW has been performed on Cu (UNS C10100) and SS (AISI 304) with brass interlayer by varying various welding parameters, aiming to identify the interfacial reaction, changes in microstructure and weld strength. The highest tensile shear and T-peel failure loads of 1277 and 174 N are achieved at the optimum conditions like 68 µm of vibration amplitude, 0.42 MPa of weld pressure and 1 s of weld time. The fractured surface analysis of brass interlayer and AISI 304 stainless steel samples reveals the features like swirls, voids and intermetallic compounds (IMCs). These IMCs are composed of CuZn and FeZn composite-like structures with 1.0 μm thickness. This confirms that the weld quality is specifically sensitive to the levels of input parameter combinations as well as the type of material present on the sonotrode side.

Microbiologically influenced corrosion evaluation on brass (UNS C68700, UNS C443) and AISI 316 stainless steel

International Nuclear Information System (INIS)

Ohanian, M.; Diaz, V.; Corengia, M.; Russi, P.; Pianzzola, M. J.; Menes, R. J.

2014-01-01

Microorganisms may play an important role in the corrosion process and generate conditions which affect the rate and/or the mechanism of deterioration. They become visible by the formation of bio films: clusters of microorganisms and extracellular polymers. These bio films affect not only the durability of the material, but also reduce the heat transfer. The present work studied the growth of aerobic and anaerobic heterotrophic microorganisms and sulfate reducing bacteria on aluminum brass (Uns C.a.), admiralty brass (Uns C.a.) and stainless steel Asi 316 in exposure experiments held in the Bay of Montevideo (Uruguay). The influence of the biofilm growth on the corrosion behavior was studied by electrochemical techniques: polarization curves and Electrochemical Impedance Spectroscopy (Ei). The selection of the most suitable material for the exposure conditions is discussed and hypotheses of the corrosion mechanism are presented. Although stainless steel Asi 316 presented the lowest corrosion rate it showed localized deterioration. (Author)

Antiphase boundaries, inversion, and ferroelastic domains in the striped-type superstructure of γ-brass Cu-Al alloys

Science.gov (United States)

Koyama, Y.; Hatano, M.; Tanimura, M.

1996-05-01

Features of the striped-type superstructure in γ-brass Cu-Al alloys have been investigated mainly by transmission electron microscopy in order to understand the role of a rhombohedral distortion in its stability. From dark field images taken from alloys exhibiting the superstructure, it was found that there exist two types of ferroelastic rhombohedral domains, which are in a twin relation. In other words, the superstructure is characterized by a periodic array of the ferroelastic domains as well as inversion antiphase boundaries. Because charge density waves should be responsible for the formation of the superstructure, as suggested in our previous paper [Phys. Rev. B 40, 5378 (1989)], the rhombohedral distortion must play a crucial role in their appearance. Presumably the distortion enlarges parallel portions of the Fermi surface. On the basis of the present experimental data, the interplay between the striped-type superstructure and the rhombohedral γ-brass structure is also discussed.

Maxwell-Stefan based modelling of ion exchange systems containing common species (Cd"2"+, Na"+) and distinct sorbents (ETS-4, ETS-10)

International Nuclear Information System (INIS)

Lito, P. F.; Aniceto, J. P. S.; Silva, C. M.

2015-01-01

Cadmium(II) is a toxic hazardous cation, whose presence in the environment causes great concern because of its bioaccumulation in organisms and bio amplification along food chain. Hence, the removal of cadmium compounds from industrial waters and wastewaters is particularly essential, which requires intensive experimental and modelling studies to deal with the problem. In this work, the ion exchange of Cd"2"+ ions from aqueous solution using microporous titanosilicates (ETS-4 and ETS-10) has been modelled using adapted Maxwell-Stefan equations for the ions transport inside the sorbent particles. The fundamentals of the Maxwell-Stefan equations along with correlations for the convective mass transfer coefficients have been used with advantage to reduce the number of model parameters. In the whole, the model was able to represent successfully the kinetic behaviour of 11 independent and very distinct curves of both studied systems (Cd2"+"/Na"+/ETS-4 and Cd"2"+/Na"+/ ETS-10). The predictive capability of the model has been also shown, since several uptake curves were accurately predicted with parameters fitted previously to different sets of experimental data.

Anti frictional materials iron-pig iron-brass manufacture using shaving waste products of pig-iron

International Nuclear Information System (INIS)

Nasamov, S. N.; Krivij, N.; Gudenau, H. W.; Babich, A. I.; Garcia, L. L.; Formoso, A.; Cores, A.

2003-01-01

Parts based on iron and steel powders are widely used in the manufacture of automobile and domestic equipment. This work was done to study the anti-friction properties of iron-pig iron-brass compositions of materials which were obtained by pressing and sintering from a mix of iron powders and industrial by products of cast-iron turnings, brass, talc and technical sulphur. Experiments were performed using cold pressure technology in the flowing matrix of the powder composite without solid lubricants. The subsequent sintering was carried out at 1200 degree centigree under isothermal conditions in a nitrogen atmosphere in the sintering zone during 1 h. The physical-mechanical and anti-friction properties were almost double by the active drainage of the gases from the compression mould. The study of the microstructure of the sintered materials showed that free cementite existed between the particle limits and around the pores. large agglomerations of dark inclusions could be observed, consisting of graphite, zinc and iron oxides, which were points of tension in the materials that reduce its durability and, therefore, its wear resistance to dry friction. (Author) 34 refs

AN INVESTIGATION OF THE IMPACT OF ALLOY COMPOSITION AND PH ON THE CORROSION OF BRASS IN DRINKING WATER

Science.gov (United States)

A better understanding of brass corrosion may provide information and guidance on the use of the safest materials for the production of plumbing fixtures, and optimization of corrosion control treatments. The effect of alloy composition and pH on the metal leached from six differ...

Hume-Rothery electron concentration rule across a whole solid solution range in a series of gamma-brasses in Cu-Zn, Cu-Cd, Cu-Al, Cu-Ga, Ni-Zn and Co-Zn alloy systems

Science.gov (United States)

Mizutani, U.; Noritake, T.; Ohsuna, T.; Takeuchi, T.

2010-05-01

The aim of the present work is to examine if the Hume-Rothery stabilisation mechanism holds across whole solid solution ranges in a series of gamma-brasses with especial attention to the role of vacancies introduced into the large unit cell. The concentration dependence of the number of atoms in the unit cell, N, for gamma-brasses in the Cu-Zn, Cu-Cd, Cu-Al, Cu-Ga, Ni-Zn and Co-Zn alloy systems was determined by measuring the density and lattice constants at room temperature. The number of itinerant electrons in the unit cell, e/uc, is evaluated by taking a product of N and the number of itinerant electrons per atom, e/a, for the transition metal element deduced earlier from the full-potential linearised augmented plane wave (FLAPW)-Fourier analysis. The results are discussed within the rigid-band model using as a host the density of states (DOS) derived earlier from the FLAPW band calculations for the stoichiometric gamma-brasses Cu5Zn8, Cu9Al4 and TM2Zn11 (TM = Co and Ni). A solid solution range of gamma-brasses in Cu-Zn, Cu-Cd, Cu-Al, Cu-Ga and Ni-Zn alloy systems is found to fall inside the existing pseudogap at the Fermi level. This is taken as confirmation of the validity of the Hume-Rothery stability mechanism for a whole solute concentration range of these gamma-brasses. An exception to this behaviour was found in the Co-Zn gamma-brasses, where orbital hybridisation effects are claimed to play a crucial role in stabilisation.

Maxwell-Stefan diffusion coefficient estimation for ternary systems: an ideal ternary alcohol system.

Science.gov (United States)

Allie-Ebrahim, Tariq; Zhu, Qingyu; Bräuer, Pierre; Moggridge, Geoff D; D'Agostino, Carmine

2017-06-21

The Maxwell-Stefan model is a popular diffusion model originally developed to model diffusion of gases, which can be considered thermodynamically ideal mixtures, although its application has been extended to model diffusion in non-ideal liquid mixtures as well. A drawback of the model is that it requires the Maxwell-Stefan diffusion coefficients, which are not based on measurable quantities but they have to be estimated. As a result, numerous estimation methods, such as the Darken model, have been proposed to estimate these diffusion coefficients. However, the Darken model was derived, and is only well defined, for binary systems. This model has been extended to ternary systems according to two proposed forms, one by R. Krishna and J. M. van Baten, Ind. Eng. Chem. Res., 2005, 44, 6939-6947 and the other by X. Liu, T. J. H. Vlugt and A. Bardow, Ind. Eng. Chem. Res., 2011, 50, 10350-10358. In this paper, the two forms have been analysed against the ideal ternary system of methanol/butan-1-ol/propan-1-ol and using experimental values of self-diffusion coefficients. In particular, using pulsed gradient stimulated echo nuclear magnetic resonance (PGSTE-NMR) we have measured the self-diffusion coefficients in various methanol/butan-1-ol/propan-1-ol mixtures. The experimental values of self-diffusion coefficients were then used as the input data required for the Darken model. The predictions of the two proposed multicomponent forms of this model were then compared to experimental values of mutual diffusion coefficients for the ideal alcohol ternary system. This experimental-based approach showed that the Liu's model gives better predictions compared to that of Krishna and van Baten, although it was only accurate to within 26%. Nonetheless, the multicomponent Darken model in conjunction with self-diffusion measurements from PGSTE-NMR represents an attractive method for a rapid estimation of mutual diffusion in multicomponent systems, especially when compared to exhaustive

Strain path and work-hardening behavior of brass

International Nuclear Information System (INIS)

Sakharova, N.A.; Fernandes, J.V.; Vieira, M.F.

2009-01-01

Plastic straining in metal forming usually includes changes of strain path, which are frequently not taken into account in the analysis of forming processes. Moreover, strain path change can significantly affect the mechanical behavior and microstructural evolution of the material. For this reason, a combination of several simple loading test sequences is an effective way to investigate the dislocation microstructure of sheet metals under such forming conditions. Pure tension and rolling strain paths and rolling-tension strain path sequences were performed on brass sheets. A study of mechanical behavior and microstructural evolution during the simple and the complex strain paths was carried out, within a wide range of strain values. The appearance and development of deformation twinning was evident. It was shown that strain path change promotes the onset of premature twinning. The work-hardening behavior is discussed in terms of the twinning and dislocation microstructure evolution, as revealed by transmission electron microscopy

Imagining Afrikaners musically: Reflections on the ‘African music’ of Stefans Grové

Directory of Open Access Journals (Sweden)

S. J. Muller

2000-04-01

Full Text Available For nearly two decades Stefans Grové has been composing music that absorbs the cultural “Other" of Africa in a manner that defies an easy classification of ‘‘indigenous’’ principles and “exotic” appropriation. His own conception of himself as an African who composes African music challenges the inhibition of “white” Afrikaner culture and revivifies Afrikaner culture as African culture. In so doing, Grové is consciously subverting the myth of a united Africa over against a monolithic "West” - and with it the legitimacy of an autochthonous echt African culture previously excluded by “whites" and Afrikaners. This article takes a closer look at the strategies and techniques involved in this fin de siècle musical imaginings of Afrikaner identity.

New Co–Pd–Zn γ-Brasses with Dilute Ferrimagnetism and Co₂Zn₁₁ Revisited: Establishing the Synergism between Theory and Experiment

Energy Technology Data Exchange (ETDEWEB)

Xie, Weiwei; Miller, Gordon J

2014-04-22

A synergism between electronic structure theory and the targeted synthesis of new ternary γ-brass compounds is demonstrated in the Co–Zn system. Co₂Zn₁₁, which adopts a cubic γ-brass structure, is shown to be at the Zn-rich end of a homogeneity range that varies from 15.4 to 22.1 atom % Co. Four samples were examined by single-crystal diffraction, all of which crystallize in space group I43¯m with the lattice parameter ranging from 8.9851(1) to 8.8809(1) Å as the Co content increases. In the 26-atom γ-brass clusters, Co atoms preferentially occupy the outer tetrahedron (OT) sites and then replace Zn atoms at the octahedron (OH) sites at higher Co concentrations. In addition, a small fraction of vacancies occurs on the inner tetrahedron (IT) sites. The electronic structure of Co₂Zn₁₁ shows two distinct pseudogaps near the Fermi level: one at 292 valence electrons per primitive unit cell and the other at 302–304 valence electrons per primitive unit cell. Using molecular orbital arguments applied to the body-centered cubic packing of the 26-atom Co₄Zn₂₂ γ-brass cluster, these pseudogaps arise from (i) splitting among the valence s and p orbitals, which gives rise to the Hume–Rothery electron counting rule, and (ii) splitting within the manifold of Co 3d orbitals via Co–Zn orbital interactions. Co₂Zn₁₁ is Pauli paramagnetic, although the density of states at the Fermi level is large, whereas Curie–Weiss behavior emerges for higher Co concentrations. Because Pd has a size and an electronegativity similar to those of Zn, and inspired by the pseudogaps in the electronic density of states curve of Co₂Zn₁₁, Pd-doped γ-brass compounds were designed and two new γ-brass compounds were obtained: Co_0.92(2)Pd_1.08Zn₁₁ and Co_2.50(1)Pd_2.50Zn₈. In these, the site preferences for Co and Pd can

Dislocation Line Tensions in the Noble Metals, the Alkali Metals and beta-Brass

Energy Technology Data Exchange (ETDEWEB)

Pettersson, B; Malen, K

1971-06-15

The line tension for a straight partial dislocation which can produce the necessary slip for a martensitic phase transformation of the bcc-fcc or bcc-hcp type has been calculated in ordered 6-brass and in Li, Na and K. Also the line tension for a Shockley partial dislocation in Cu, Ag and Au has been calculated. Negative line tension is found for certain dislocation directions, and the possible influence of this on the stability of a stacking fault bounded by these partials is discussed

Inhibition of Brass (80/20 by 5-Mercaptopentyl-3-Amino-1,2,4-Triazole in Neutral Solutions

Directory of Open Access Journals (Sweden)

Ivan А. Arkhipushkin

2017-11-01

Full Text Available The effect of the adsorption of 5-mercaptopentyl-3-amino-1,2,4-triazole (MPATA on the corrosive behavior of brass (Cu80/Zn20 in neutral (pH 7.4 borate buffer solutions with and without 0.01 M NaCl was studied. Electrochemical methods show significant decrease of the anodic and cathodic currents on the polarization curves in the presence of MPATA. X-ray photoelectron spectroscopy (XPS reveals MPATA adsorption on the brass surface from an inhibitor solution. After 17 h of exposure, a mixed complex [CuxZnyMPATAz] with a thickness of about 3–3.5 nm is formed on the surface. This nanolayer has sufficient protective ability to withstand corrosion tests in a salt fog chamber: after 5 days of testing, the samples remain glossy and less than 1% of the surface has been damaged. After corrosion tests in a salt fog chamber, the surface of unprotected samples is enriched with zinc, while at the surface of inhibitor-treated samples, the copper and zinc are present in practically equal contents.

To Determine the Percentage of Copper in a Brass Screw Using a Computer Interface with a Colorimeter.

Science.gov (United States)

Horgan, Joan; Hedge, Robyn

1997-01-01

Year 11 students investigated the real-world problem of whether screws are really brass. It allowed them to use the colorimeter and computer interface in a way that was easily understood and models normal practice in testing laboratories. Screws were dissolved in nitric acid and their absorbance of red light was compared with a standard curve.…

Investigation of scaling laws by critical neutron scattering from beta-brass

DEFF Research Database (Denmark)

Als-Nielsen, Jens Aage

1969-01-01

Using a Cu65-Zn β-brass crystal, the critical scattering of neutrons has been studied, both above and below T c. The staggered susceptibilities χ vary as C+(T/Tc-1)-γ and C-(1-T/Tc)-γ ', respectively. It is found that γ=γ' within an accuracy of 3%, in agreement with the scaling hypothesis of static...... critical phenomena; and that C+/C-=5.46±0.05, in excellent agreement with the recent parametric representation theory of Schofield and in fair agreement with the results of series expansions by Essam and Hunter. For fixed q, a flat maximum is observed in the wave-vector-dependent susceptibility χ(q, T...

On the possible importance of mechanical twinning for the development of the brass-type rolling texture and final comment on the above remarks by T. Leffers

DEFF Research Database (Denmark)

Leffers, Torben

1970-01-01

The author presents his final comments on the discussion between himself and Heye and Wasserman (see abstrs. A11834 and A11835 of 1970) which arose from the latter authors' paper on mechanical twinning (see abstr. A19815 of 1969). The validity of the twinning theory for the brass-type rolling...... texture is questioned for two reasons: There is no convincing crystallographic model explaining how the formation of the brass-type texture by combined twinning and slip should work in theory, and there are experimental results indicating that it should not work in practice...

Anatomical studies of timber and EPMA analysis of brass artefacts collected from steam engine shipwreck of Minicoy Island, Lakshadweep, India

Digital Repository Service at National Institute of Oceanography (India)

Tripati, S.; Shukla, S.R.; Som, V.; Sundaresh; Khedekar, V.; Shashikala, S.; Sharma, S.K.

construction but also for anchors. During exploration of shipwreck off Minicoy doorframe hinge, latch, porthole, flanges, J hook were found and all these artefacts are made of brass. Moreover timber remains noticed on doorframe hinge and latch. In order...

Nanosecond pulsed laser ablation of brass in a dry and liquid-confined environment

Science.gov (United States)

Bashir, Shazia; Vaheed, Hamza; Mahmood, Khaliq

2013-02-01

The effect of ambient environment (dry or wet) and overlapping laser pulses on the laser ablation performance of brass has been investigated. For this purpose, a Q-switched, frequency doubled Nd:YAG laser with a wavelength of 532 nm, pulse energy of 150 mJ, pulse width of 6 ns and repetition rate of 10 Hz is employed. In order to explore the effect of ambient environments, brass targets have been exposed in deionized water, methanol and air. The targets are exposed for 1000, 2000, 3000 and 4000 succeeding pulses in each atmosphere. The surface morphology and chemical composition of ablated targets have been characterized by using Scanning Electron Microscope (SEM), Atomic Force Microscope (AFM) and Attenuated Total Reflection (ATR) techniques. In case of liquid environment, various features like nano- and micro-scale laser-induced periodic surface structures with periodicity 500 nm-1 μm, cavities of size few micrometers with multiple ablative layers and phenomenon of thermal stress cracking are observed. These features are originated by various chemical and thermal phenomena induced by laser heating at the liquid-solid interfaces. The convective bubble motion, explosive boiling, pressure gradients, cluster and colloid formation due to confinement effects of liquids are possible cause for such kind of features. The metal oxides and alcohol formed on irradiated surface are also playing the significant role for the formation of these kinds of structure. In case of air one huge crater is formed along with the redeposition of sputtered material and is ascribed to laser-induced evaporation and oxide formation.

Experimental validation of the Maxwell-Stefan theory for the description of liquid-side mass transfer-absorption of NH3 in water using a stirred cell.

NARCIS (Netherlands)

Frank, M.J.W.; Frank, M.J.W.; Kuipers, J.A.M.; van Swaaij, Willibrordus Petrus Maria

1996-01-01

The main goal of this paper is to demonstrate the validity of the Maxwell-Stefan theory for the description of liquid phase mass transport processes in a binary mixture. To critically test this theory absorption experiments of ammonia in water were conducted in a stirred cell. The flux model

Automated Image Acquisition System for the Verification of Copper-Brass Seal Images

International Nuclear Information System (INIS)

Stringa, E.; Bergonzi, C.; Littmann, F.; ); Marszalek, Y.; Tempesta, S.; )

2015-01-01

This paper describes a system for the verification of copper-brass seals realized by JRC according to DG ENER requirements. DG ENER processes about 20,000 metal seals per year. The verification of metal seals consists in visually checking the identity of a removed seal. The identity of a copper-brass seal is defined by a random stain pattern realized by the seal producer together with random scratches engraved when the seals are initialized ('seal production'). In order to verify that the seal returned from the field is the expected one its pattern is compared with an image taken during seal production. Formerly, seal initialization and verification were very heavy tasks as seal pictures were acquired with a camera one by one both in the initialization and verification stages. During the initialization the Nuclear Safeguards technicians had to place one by one new seals under a camera and acquire the related reference images. During the verification, the technician had to take used seals and place them one by one under a camera to take new pictures. The new images were presented to the technicians without any preprocessing and the technicians had to recognize the seal. The new station described in this paper has an automated image acquisition system allowing to easily process seals in batches of 100 seals. To simplify the verification, a software automatically centres and rotates the newly acquired seal image in order to perfectly overlap with the reference image acquired during the production phase. The new system significantly speeds up seal production and helps particularly with the demanding task of seal verification. As a large part of the seals is dealt with by a joint Euratom-IAEA team, the IAEA directly profits from this development. The new tool has been in routine use since mid 2013. (author)

Structure of ordered and disordered α-brass

International Nuclear Information System (INIS)

Mu''ller, S.; Zunger, Alex

2001-01-01

Alloys of copper and zinc (brass) have been widely used since Neolithic times due to the discovery that unlike regular copper this alloy can be worked ''cold'' around a 3:1 copper-to-zinc ratio. While it is now known that the as-grown system is a disordered fcc solid solution, no 3:1 ordered phase has yet been directly observed even though the negative mixing enthalpy of the disordered alloy suggests ordering tendencies. Moreover, neutron scattering experiments have been deduced that this disordered alloy contains peculiar chains of Zn atoms. We have expressed the first-principles calculated total energy of general Cu-Zn fcc-lattice configurations using a mixed-space cluster expansion. Application of Monte Carlo--simulated annealing to this generalized Ising-like Hamiltonian produces the predicted low-temperature ground state as well as finite-temperature phase diagram and short-range order. We find (i) that at low temperature the disordered fcc alloy will order into the DO 23 structure, (ii) the high-temperature short-range order in close agreement with experiment, and (iii) chains of Zn atoms in the [001] direction, as seen experimentally. Furthermore, our model allows a detailed study of the influence and importance of strain on the phase stability

Quantitative analysis of a brass alloy using CF-LIBS and a laser ablation time-of-flight mass spectrometer

Science.gov (United States)

Ahmed, Nasar; Abdullah, M.; Ahmed, Rizwan; Piracha, N. K.; Aslam Baig, M.

2018-01-01

We present a quantitative analysis of a brass alloy using laser induced breakdown spectroscopy, energy dispersive x-ray spectroscopy (EDX) and laser ablation time-of-flight mass spectrometry (LA-TOF-MS). The emission lines of copper (Cu I) and zinc (Zn I), and the constituent elements of the brass alloy were used to calculate the plasma parameters. The plasma temperature was calculated from the Boltzmann plot as (10 000  ±  1000) K and the electron number density was determined as (2.0  ±  0.5)  ×  1017 cm-3 from the Stark-broadened Cu I line as well as using the Saha-Boltzmann equation. The elemental composition was deduced using these techniques: the Boltzmann plot method (70% Cu and 30% Zn), internal reference self-absorption correction (63.36% Cu and 36.64% Zn), EDX (61.75% Cu and 38.25% Zn), and LA-TOF (62% Cu and 38% Zn), whereas, the certified composition is (62% Cu and 38% Zn). It was observed that the internal reference self-absorption correction method yields analytical results comparable to that of EDX and LA-TOF-MS.

Injection Pharyngoplasty With Autologous Fat as Treatment for Stress Velopharyngeal Insufficiency in Brass and Woodwind Musicians.

Science.gov (United States)

Syamal, Mausumi N; Bryson, Paul C

2017-02-01

Stress velopharyngeal insufficiency (SVPI) is an uncommon but often career-threatening condition affecting professional brass and woodwind musicians. To review the evaluation of and treatment for SVPI in professional musicians with lipoinjection to the posterior pharyngeal wall. A retrospective medical record and literature review. Two professional musicians with SVPI treated with autologous lipoinjection to the posterior pharyngeal wall were included. Nasopharyngoscopy was performed while patients played their instrument both before and after injection. To assess the effectiveness of autologous fat injection to the posterior pharyngeal wall to treat stress velopharyngeal insufficiency in 2 professional instrumentalists. Successful treatment was the absence of VPI during playing as visualized by flexible nasopharyngoscopy. After autologous lipoinjection of the posterior pharyngeal wall, 1 patient resumed full play with complete resolution, now 3 years after lipoinjection pharyngoplasty. The other patient received temporary resolution. Both had no surgical complications. Stress VPI is often a career-threatening condition for professional brass and woodwind musicians, with a cited incidence of 34%. Various treatment options in the literature include observation, speech and language pathology referral for pharyngeal strengthening, lipoinjection of the soft palate, and more invasive options, such as sphincter pharyngoplasty, pharyngeal flaps and V-Y pushback. Autologous fat injection pharyngoplasty of the posterior pharyngeal wall may be a less invasive treatment option for musicians with SVPI.

Monte Carlo simulation of spectrum changes in a photon beam due to a brass compensator

International Nuclear Information System (INIS)

Custidiano, E.R.; Valenzuela, M.R.; Dumont, J.L.; McDonnell, J.; Rene, L; Rodriguez Aguirre, J.M.

2011-01-01

Monte Carlo simulations were used to study the changes in the incident spectrum when a poly-energetic photon beam passes through a static brass compensator. The simulated photon beam spectrum was evaluated by comparing it against the incident spectra. We also discriminated the changes in the transmitted spectrum produced by each of the microscopic processes. (i.e. Rayleigh scattering, photoelectric effect, Compton scattering, and pair production). The results show that the relevant process in the energy range considered is the Compton Effect, as expected for composite materials of intermediate atomic number and energy range considered.

Monte Carlo simulation of spectrum changes in a photon beam due to a brass compensator

Energy Technology Data Exchange (ETDEWEB)

Custidiano, E.R., E-mail: ernesto7661@gmail.com [Department of Physics, FaCENA, UNNE, Av., Libertad 5470, C.P.3400, Corrientes (Argentina); Valenzuela, M.R., E-mail: meraqval@gmail.com [Department of Physics, FaCENA, UNNE, Av., Libertad 5470, C.P.3400, Corrientes (Argentina); Dumont, J.L., E-mail: Joseluis.Dumont@elekta.com [Elekta CMS Software, St.Louis, MO (United States); McDonnell, J., E-mail: josemc@express.com.ar [Cumbres Institute, Riobamba 1745, C.P.2000, Rosario, Santa Fe (Argentina); Rene, L, E-mail: luismrene@gmail.com [Radiotherapy Center, Crespo 953, C.P.2000, Rosario, Santa Fe (Argentina); Rodriguez Aguirre, J.M., E-mail: juakcho@gmail.com [Department of Physics, FaCENA, UNNE, Av., Libertad 5470, C.P.3400, Corrientes (Argentina)

2011-06-15

Monte Carlo simulations were used to study the changes in the incident spectrum when a poly-energetic photon beam passes through a static brass compensator. The simulated photon beam spectrum was evaluated by comparing it against the incident spectra. We also discriminated the changes in the transmitted spectrum produced by each of the microscopic processes. (i.e. Rayleigh scattering, photoelectric effect, Compton scattering, and pair production). The results show that the relevant process in the energy range considered is the Compton Effect, as expected for composite materials of intermediate atomic number and energy range considered.

Berroia in Stefan Dušan's politics

Directory of Open Access Journals (Sweden)

Maksimović Ljubomir M.

2004-01-01

Full Text Available Being one of the most important cities in Macedonia, Berroia automatically entered the horizon of Serbian politics once Stefan Dušan got involved into the Byzantine Civil War during the forties of the fourteenth century. The King's previous invasion of Macedonia, in the thirties, had been aimed directly towards Thessalonica and was a failure. Thus, in the second phase of his politics, in which Macedonia was used as a backing in the striving for the Empire, Thessalonica was temporarily left aside, although not before first Serres and then Berroia had been captured, so as to leave it completely isolated. Initially, it was Serres rather than Berroia that Dušan was focused on, its conquest in September 1345 leading immediately to the proclamation of the Empire. Afterwards — in the first half of 1346 — Berroia was also conquered and turned into an important Serbian stronghold, Thessalonica being thus cut off, which enabled the Serbs to await a more favorable time to capture it. At the same time, the conquest of Berroia paved the way for the Serbian invasion of Epirus and Thessalia. Emperor John VI Cantacuzenus was certainly aware of the consequences of such a strategic constellation. Thus, when he finally managed to neutralize the Zelots in Thessalonica, his first move towards the change of the situation was to recuperate Berroia and surrounding towns. This was such a severe blow for the Serbs, that it immediately became clear that even Dušan's imperial power might be endangered if his position in Macedonia further weakened. He reacted promptly and recaptured Berroia and other strongholds he had lost. The conquest of Berroia was lead by the nobleman Radoslav Hlapen, who first acted as a governor on behalf of Dušan, and after the death of the Emperor practically as an independent ruler of that part of Macedonia.

The Observation of TGSCC Nucleation in α-Brass/NH3 System

International Nuclear Information System (INIS)

Kim, Joung Soo

1991-01-01

Transgranular stress corrosion cracking (TGSCC) of α-brass in cuprous ammoniacal solution was investigated to illustrate the nucleation (initiation) mechanism of TGSCC. The cuprous ammoniacal solution used tin this study is at equilibrium with Cu, which means no formation of oxide film on the specimen surface and no general corrosion occurring. TGSCC nucleation was observed to occur by localized preferential anodic corrosion along slip traces formed on the specimen surface during straining in solution. The orientation of crack surfaces formed by the nucleation and the propagation of TGSCC were different from each other: the former is {111} and the latter {110}. This represents that both events do not occur by the same mechanism. The observation of TGSCC nucleation in this investigation also shows that the thin film technique using TEM is not appropriate for a study on the propagation mechanism of TGSCC

Characterization of Schottky barrier diodes fabricated from electrochemical oxidation of {alpha} phase brass

Energy Technology Data Exchange (ETDEWEB)

Bond, John W., E-mail: jwb13@le.ac.u [Forensic Research Centre, University of Leicester, Leicester LE1 7 EA (United Kingdom)

2011-04-01

By careful selection of chloride ion concentration in aqueous sodium chloride, electrochemical oxidation of {alpha} phase brass is shown to permit fabrication of either p-type copper (I) oxide/metal or n-type zinc oxide/metal Schottky barrier diodes. X-ray photoelectron and Auger electron spectroscopies provide evidence that barrier formation and rectifying qualities depend on the relative surface abundance of copper (I) oxide and zinc oxide. X-ray diffraction of the resulting diodes shows polycrystalline oxides embedded in amorphous oxidation products that have a lower relative abundance than the diode forming oxide. Conventional I/V characteristics of these diodes show good rectifying qualities. When neither of the oxides dominate, the semiconductor/metal junction displays an absence of rectification.

Slow strain rate stress corrosion cracking under multiaxial deformation conditions: technique and application to admiralty brass

International Nuclear Information System (INIS)

Blanchard, W.K.; Heldt, L.A.; Koss, D.

1984-01-01

A set of straightforward experimental techniques are described for the examination of slow strain rate stress corrosion cracking (SCC) of sheet deforming under nearly all multiaxial deformation conditions which result in sheet thinning. Based on local fracture strain as a failure criterion, the results contrast stress corrosion susceptibility in uniaxial tension with those in both plane strain and balanced biaxial tension. These results indicate that the loss of ductility of the brass increases as the stress state changes from uniaxial toward balanced biaxial tension

The Belgian repository of fundamental atomic data and stellar spectra (BRASS). I. Cross-matching atomic databases of astrophysical interest

Science.gov (United States)

Laverick, M.; Lobel, A.; Merle, T.; Royer, P.; Martayan, C.; David, M.; Hensberge, H.; Thienpont, E.

2018-04-01

Context. Fundamental atomic parameters, such as oscillator strengths, play a key role in modelling and understanding the chemical composition of stars in the Universe. Despite the significant work underway to produce these parameters for many astrophysically important ions, uncertainties in these parameters remain large and can propagate throughout the entire field of astronomy. Aims: The Belgian repository of fundamental atomic data and stellar spectra (BRASS) aims to provide the largest systematic and homogeneous quality assessment of atomic data to date in terms of wavelength, atomic and stellar parameter coverage. To prepare for it, we first compiled multiple literature occurrences of many individual atomic transitions, from several atomic databases of astrophysical interest, and assessed their agreement. In a second step synthetic spectra will be compared against extremely high-quality observed spectra, for a large number of BAFGK spectral type stars, in order to critically evaluate the atomic data of a large number of important stellar lines. Methods: Several atomic repositories were searched and their data retrieved and formatted in a consistent manner. Data entries from all repositories were cross-matched against our initial BRASS atomic line list to find multiple occurrences of the same transition. Where possible we used a new non-parametric cross-match depending only on electronic configurations and total angular momentum values. We also checked for duplicate entries of the same physical transition, within each retrieved repository, using the non-parametric cross-match. Results: We report on the number of cross-matched transitions for each repository and compare their fundamental atomic parameters. We find differences in log(gf) values of up to 2 dex or more. We also find and report that 2% of our line list and Vienna atomic line database retrievals are composed of duplicate transitions. Finally we provide a number of examples of atomic spectral lines

A STUDY TO EXPLORE THE POSSIBLE USES OF X-RAY MOTION PICTURE PHOTOGRAPHY FOR THE IMPROVEMENT OF BRASS INSTRUMENT TEACHING. SUMMARY REPORT.

Science.gov (United States)

MERRIMAN, LYLE C.

THE OBJECTIVE OF THIS STUDY WAS TO COLLECT INFORMATION WHICH WOULD LEAD TO MORE EFFICIENT TEACHING OF SUCH FUNDAMENTALS OF BRASS INSTRUMENT PERFORMANCE AS PITCH, DYNAMICS, AND ARTICULATION. FIVE FRENCH HORN AND FIVE TRUMPET PLAYERS WERE PHOTOGRAPHED BY MEANS OF CINEFLUOROGRAPHY DURING THE PERFORMANCE OF CERTAIN MUSICAL EXERCISES. REPRESENTATIVE…

Electrochemical and Corrosion Properties of Aluminum Brass in Seawater Desalination Environments

Directory of Open Access Journals (Sweden)

Hong JU

2017-11-01

Full Text Available The corrosion behavior and mechanism of aluminum brass (HAl77-2 in seawater desalination plant were investigated using electrochemical measurement, Scanning Electronic Microscope (SEM and Energy Dispersive X-ray spectroscopy (EDX analysis. The electrochemical results revealed that the corrosion of HAl77-2 in the desalination artificial seawater depended on chloride ion concentrations, displaying a maximum with a chloride ion concentration of 2.3 wt.%. Corrosion rate of HAl77-2 initial increased and subsequently decreased with the increasing of chloride ion concentration. Moreover, corrosion of HAl77-2 becomes more severe when temperature rises. The above results obtained by electrochemical impedance spectroscopy and potentiodynamic polarization tests were in a good agreement. The results of SEM and EDX methods showed selective localized corrosion appeared remarkably on the surface of HAl77-2.DOI: http://dx.doi.org/10.5755/j01.ms.23.4.17170

Study on the Formation and Precipitation Mechanism of Mn5Si3 Phase in the MBA-2 Brass Alloy

Science.gov (United States)

Li, Hang; Jie, Jinchuan; Zhang, Pengchao; Jia, Chunxu; Wang, Tongmin; Li, Tingju

2016-06-01

Mn5Si3 is an attractive dispersion in the special brass, owing to its high hardness and high wear resistance. In the present study, synchrotron X-ray radiography and rapid cooling were applied to investigate the formation mechanism of Mn5Si3 phase in the MBA-2 brass alloy. The primary Mn5Si3 phase is proved to exist stably in the alloy melt and nucleate from the melt at temperatures above 1373 K (1100 °C). In addition, the precipitation mechanism of Mn5Si3 phase is addressed systematically by the isothermal heat treatment. The Mn5Si3 particles are observed to precipitate from the matrix at temperatures above 1023 K (750 °C), and a crystallographic orientation relationship is found between the precipitated Mn5Si3 particle and β phase: (110)_{β } //(1overline{1} 00)_{{{{Mn}}5 {{Si}}3 }} and [overline{1} 11]_{β } //[11overline{2} overline{2} ]_{{{{Mn}}5 {{Si}}3 }} . However, the precipitation of Mn5Si3 phase is thermodynamically inhibited at lower temperatures, which can be ascribed to the increase in the Gibbs free energy of formation of Mn5Si3 with decreasing the temperature.

”När det tar slut och börjar om igen”: Ekokritiska perspektiv på Stefan Castas ungdomsdystopier

Directory of Open Access Journals (Sweden)

Åsa Nilsson-Skåve

2015-06-01

Full Text Available The Swedish author Stefan Casta has written several books for children and adults, thematically addressing nature and environment. This paper highlights and discusses ideological and aesthetical aspects in his recent novel, Den gröna cirkeln (2011 and its sequel, Under tiden (2012, from an ecocritical perspective. The novels combine environmental commitment with a dystopian story about four young people who survive a climate catastrophe but get lost in a world they no longer recognize and where ordinary logic does not seem to exist. The paper elucidates this process by a comparison with Buell’s (2001 concept of toxic discourse as there are several parallells, such as elements like a lost paradise, inescapable toxic, and the oppression of powerful societal interests, throughout the story. Simultaneously, ambivalence towards culture and civilization is expressed. Nature and culture become intertwined in a way that differs from the conventional dichotomy and this complexity is the supporting structure of the texts. The four teenagers, and even more so the following generation, become symbols of a new future, a pattern recognized from much dystopian as well as children’s fiction, where the weak and oppressed turn out to be the heroes. The optimistic and didactic ambition in this kind of dystopian stories is often aimed at creating an engagement for environmental issues and a sustainable future among young people. By placing the story in an imagined future as well as adding fantastic elements, Stefan Casta creates a kind of ”Verfremdungseffekt” on phenomena we often do not question in our lifestyle. This could be a liberating relativization to the young readers; the social and cultural drives that rule many of our life choices are not essential and can therefore always be reconsidered.

Analysis and Solution to the Crucial Problems during Brass Instrument Playing%铜管演奏把握性问题的分析与处理

Institute of Scientific and Technical Information of China (English)

张良; 史育松

2015-01-01

The paper lists and analyzes the crucial problems during brass instruments playing. And it also sums up three factors during brass instruments which can cause the problems:playing skill ,playing psychology and physical capacity as well, and offers specific solutions to the problems.%本文列举了以往铜管演奏者在演奏中出现的把握性问题，并对其进行了分析研究，认为至少有3个方面的原因：演奏技术的问题，演奏心理的问题，体力与体能的原因。针对这3个方面的原因文章提出了具体的解决办法。

Podolsky electromagnetism and a modification in Stefan-Boltzmann law

Energy Technology Data Exchange (ETDEWEB)

Bonin, Carlos Alberto; Bufalo, Rodrigo Santos; Escobar, Bruto Max Pimentel; Zambrano, German Enrique Ramos [Instituto de Fisica Teorica (IFT/UNESP), Sao Paulo, SP (Brazil)

2009-07-01

Full text. As it is well-known, gauge fields that emerge from the gauge principle are massless vector fields. Considering the photon as a Proca particle, experience sets an upper limit on its mass. This limit is m{sub Proca} < 6X10{sup -17}eV (PDG 2006). However, a mass term, regardless how small, breaks the gauge symmetry. Nevertheless, there exists a theory in which is possible to introduce a mass term preserving all symmetries of Maxwell electromagnetism, including the gauge one: such theory is known as Podolsky Electromagnetism. Podolsky theory is a second- order-derivative theory and has some remarkable properties, despite those already mentioned: the theory has two sectors, a massive one and massless one, it depends on a free parameter (which happens to be the mass of the massive sector) that, like all other elementary particles's masses of the Standard Model, must be fixed through experiences, and the fact that the electrostatic potential is finite everywhere, including over a punctual charge. Just like Maxwell electromagnetism, Podolsky's is a constrained theory and, since it is of second order in the derivatives, it consists in a much richer theoretical structure. Therefore, from both, theoretical and experimental points of view, Podolsky electromagnetism is a very attractive theory. In this work we study a gas of Podolsky photons at finite temperature through path integration. We show that the massless sector leads to the famous Planck's law for black-body radiation and, therefore, to the Stefan-Boltzmann law. We also show that the massive sector of the Podolsky theory induces a modification in both these laws. It is possible to set limits on the Podolsky parameter through comparison of our results with data from cosmic microwave background radiation. (author)

Electrical Discharge Platinum Machining Optimization Using Stefan Problem Solutions

Directory of Open Access Journals (Sweden)

I. B. Stavitskiy

2015-01-01

Full Text Available The article presents the theoretical study results of platinum workability by electrical discharge machining (EDM, based on the solution of the thermal problem of moving the boundary of material change phase, i.e. Stefan problem. The problem solution enables defining the surface melt penetration of the material under the heat flow proceeding from the time of its action and the physical properties of the processed material. To determine the rational EDM operating conditions of platinum the article suggests relating its workability with machinability of materials, for which the rational EDM operating conditions are, currently, defined. It is shown that at low densities of the heat flow corresponding to the finishing EDM operating conditions, the processing conditions used for steel 45 are appropriate for platinum machining; with EDM at higher heat flow densities (e.g. 50 GW / m2 for this purpose copper processing conditions are used; at the high heat flow densities corresponding to heavy roughing EDM it is reasonable to use tungsten processing conditions. The article also represents how the minimum width of the current pulses, at which platinum starts melting and, accordingly, the EDM process becomes possible, depends on the heat flow density. It is shown that the processing of platinum is expedient at a pulse width corresponding to the values, called the effective pulse width. Exceeding these values does not lead to a substantial increase in removal of material per pulse, but considerably reduces the maximum repetition rate and therefore, the EDM capacity. The paper shows the effective pulse width versus the heat flow density. It also presents the dependences of the maximum platinum surface melt penetration and the corresponding pulse width on the heat flow density. Results obtained using solutions of the Stephen heat problem can be used to optimize EDM operating conditions of platinum machining.

Multicomponent diffusion in molten salt NaF-ZrF{sub 4}: Dynamical correlations and Maxwell–Stefan diffusivities

Energy Technology Data Exchange (ETDEWEB)

Baig, Mohammad Saad, E-mail: saad110baig@gmail.com; Chakraborty, Brahmananda; Ramaniah, Lavanya M. [High Pressure & Synchrotron Radiation Physics Division, Bhabha Atomic Research Centre, Trombay, Mumbai-85 (India)

2016-05-23

NaF-ZrF{sub 4} is used as a waste incinerator and as a coolant in Generation IV reactors.Structural and dynamical properties of molten NaF-ZrF{sub 4} system were studied along with Onsagercoefficients and Maxwell–Stefan (MS) Diffusivities applying Green–Kubo formalism and molecular dynamics (MD) simulations. The zirconium ions are found to be 8 fold coordinated with fluoride ions for all temperatures and concentrations. All the diffusive flux correlations show back-scattering. Even though the MS diffusivities are expected to depend very lightly on the composition because of decoupling of thermodynamic factor, the diffusivity Đ{sub Na-F} shows interesting behavior with the increase in concentration of ZrF{sub 4}. This is because of network formation in NaF-ZrF{sub 4}. Positive entropy constraints have been plotted to authenticate negative diffusivities observed.

Conversion of Carbon Dioxide to Ethanol by Electrochemical Synthesis Method Using Brass as A Cathode

Directory of Open Access Journals (Sweden)

Septian Ramadan

2017-09-01

Full Text Available The effect of potential and gas flow rate were investigated to determine the optimum conditions of the electrochemical synthesis process to convert carbon dioxide to ethanol. The conversion process is carried out using a NaHCO3 electrolyte solution in an electrochemical reactor equipped with a cathode and anode. As cathode is used brass, while as anode is used carbon. The result of the electrochemical synthesis process was analyzed by gas chromatography to determine the content of the compounds produced qualitatively and quantitatively. The optimum electrochemical synthesis conditions to convert carbon dioxide to ethanol are potential and gas flow rate are 3 volts and 0.5 L/minutes with ethanol concentration yielded 1.32%.

Standard specification for leak detector solutions intended for use on brasses and other copper alloys

CERN Document Server

American Society for Testing and Materials. Philadelphia

2005-01-01

1.1 This specification covers the requirements for leak detector solutions suitable for use in checking the leakage of valves, pipes, fittings, joints, and so forth of a pressurized gas system fabricated from brasses and other copper alloys. 1.2 This specification deals with the stress corrosion cracking aspect of leak detector solutions. The effectiveness, chemical, physical and mechanical properties of leak detector solutions are not within the scope of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Propagation of stress corrosion cracks in alpha-brasses

Energy Technology Data Exchange (ETDEWEB)

Beggs, Dennis Vinton [Univ. of Illinois, Urbana-Champaign, IL (United States)

1981-01-01

Transgranular and intergranular stress corrosion cracks were investigated in alpha-brasses in a tarnishing ammoniacal solution. Surface observation indicated that the transgranular cracks propagated discontinuously by the sudden appearance of a fine crack extending several microns ahead of the previous crack tip, often associated with the detection of a discrete acoustic emission (AE). By periodically increasing the deflection, crack front markings were produced on the resulting fracture surfaces, showing that the discontinuous propagation of the crack trace was representative of the subsurface cracking. The intergranular crack trace appeared to propagate continuously at a relatively blunt crack tip and was not associated with discrete AE. Under load pulsing tests with a time between pulses, Δt greater than or equal to 3 s, the transgranular fracture surfaces always exhibited crack front markings which corresponded with the applied pulses. The spacing between crack front markings, Δx, decreased linearly with Δt. With Δt less than or equal to 1.5 s, the crack front markings were in a one-to-one correspondence with applied pulses only at relatively long crack lengths. In this case, Δx = Δx* which approached a limiting value of 1 μm. No crack front markings were observed on intergranular fracture surfaces produced during these tests. It is concluded that transgranular cracking occurs by discontinuous mechanical fracture of an embrittled region around the crack tip, while intergranular cracking results from a different mechanism with cracking occurring via the film-rupture mechanism.

The influence of positron trapping at vacancies on a pattern of the Fermi surface of #betta#-brass studied by positron annihilation

International Nuclear Information System (INIS)

Rozenfeld, B.; Chabik, S.; Pajak, J.

1982-01-01

Angular correlations of positron annihilation quanta (ACPAQ) have been measured for differently oriented monocrystalline samples of the ordered #betta#-brass under conditions permitting the neglecting of the trapping of positrons at vacancies as well as in the case when almost all the positrons annihilate being trapped at vacancies. It has been shown that trapping of positrons at vacancies can make the observation of the directional anisotropy in electron momentum distribution impossible. (Auth.)

Multicomponent diffusion in molten salt LiF-BeF{sub 2}: Dynamical correlations and Maxwell–Stefan diffusivities

Energy Technology Data Exchange (ETDEWEB)

Chakraborty, Brahmananda, E-mail: brahma@barc.gov.in; Ramaniah, Lavanya M. [High Pressure & Synchrotron Radiation Physics Division, Bhabha Atomic Research Centre, Trombay, Mumbai-400085 (India)

2015-06-24

Applying Green–Kubo formalism and equilibrium molecular dynamics (MD) simulations, we have studied the dynamic correlation, Onsager coeeficients and Maxwell–Stefan (MS) Diffusivities of molten salt LiF-BeF{sub 2}, which is used as coolant in high temperature reactor. All the diffusive flux correlations show back-scattering or cage dynamics which becomes pronouced at higher temperature. Although the MS diffusivities are expected to depend very lightly on the composition due to decoupling of thermodynamic factor, the diffusivity Đ{sub Li-F} and Đ{sub Be-F} decreases sharply for higher concentration of LiF and BeF{sub 2} respectively. Interestingly, all three MS diffusivities have highest magnitude for eutectic mixture at 1000K (except Đ{sub Be-F} at lower LiF mole fraction) which is desirable from coolant point of view. Although the diffusivity for positive-positive ion pair is negative it is not in violation of the second law of thermodynamics as it satisfies the non-negative entropic constraints.

Electrochemical evaluation of the influence of pseudomonas sp on aluminium brass in seawater

International Nuclear Information System (INIS)

Frontini, Maria Alejandra; Rosso de Sanchez, Susana

2004-01-01

The development of a biofilm on metallic surfaces generates serious problems for the acceleration of corrosive processes. The control of the development of the biological film is important because its formation, among other effects, causes fouling of the surface where it has developed, producing differential aeration cells and aggressive metabolites. The influence of surface films was studied by applying electrochemical techniques in artificial seawater with and without bacteria, under different immersion times. Since the pitting potential (Epic) defines the metals' ability to resist pitting corrosion, a measure of susceptibility to pitting in aggressive solutions is considered. The pitting potential was studied in the systems being studied as well as the influence of seawater + ClO - ion biocides on the systems, since the biocides used was sodium hypochlorite (NaCIO). The material used was aluminum brass and a wild bacterial strain was used, which was isolated from the tubes by a heat exchanger from a thermoelectric plant (CW)

The Generalized Maxwell-Stefan Model Coupled with Vacancy Solution Theory of Adsorption for Diffusion in Zeolites

Directory of Open Access Journals (Sweden)

Seyyed Milad Salehi

2014-01-01

Full Text Available It seems using the Maxwell-Stefan (M-S diffusion model in combination with the vacancy solution theory (VST and the single-component adsorption data provides a superior, qualitative, and quantitative prediction of diffusion in zeolites. In the M-S formulation, thermodynamic factor (Г is an essential parameter which must be estimated by an adsorption isotherm. Researchers usually utilize the simplest form of adsorption isotherms such as Langmuir or improved dual-site Langmuir, which eventually cannot predict the real behavior of mixture diffusion particularly at high concentrations of adsorbates because of ignoring nonideality in the adsorbed phase. An isotherm model with regard to the real behavior of the adsorbed phase, which is based on the vacancy solution theory (VST and considers adsorbate-adsorbent interactions, is employed. The objective of this study is applying vacancy solution theory to pure component data, calculating thermodynamic factor (Г, and finally evaluating the simulation results by comparison with literature. Vacancy solution theory obviously predicts thermodynamic factor better than simple models such as dual-site Langmuir.

Experimental determination of the effects of annealing on the micro-structures and mechanical properties of cold-worked alpha-brass

Science.gov (United States)

Edward, Aghogho Bright; Izelu, Christopher

2013-12-01

Experimental determination of the effect of annealing on the microstructure and mechanical properties of a cold work 70 - 30 brass, was carried out by subjecting specimens of the material to various degrees of cold-work (20%, 40% and 60%), by straining using a tensile machine. The specimens for each degree of cold work were then annealed at 250°C, 350°C, 450°C and 600°C, for 30 minutes. The approach involves the use of metallographic techniques: grinding, polishing and etching to reveal the microstructure while tensile test was carried out on the specimen using a Monsanto tensometer so as to obtain the load/extension graph from which the tensile strength and hardness values were obtained. From the results obtained, it was conclusive that annealing produced finer grains and eliminates prior cold work whereby the material becomes ductile. However, there should be an appreciable deformation for this effect to be noticed. One important aspect of re-crystallization in structural materials is that there is a loss of strength which accompanies disappearance of the cold-worked grains when subjected to high temperature applications. Yet, it is often difficult to establish the exact range of permissible temperature. This work establishes a range for the re-crystallization of alpha brass as 350°C < TC < 450°C, where TC is the re-crystallization temperature. Thus, it will be safe to apply this material at temperatures below 350°C, without fear of structural changes with accompanying lost in strength.

Effect of mode of rolling on development of texture and microstructure in two-phase (α + β) brass

International Nuclear Information System (INIS)

Garg, Rohini; Ranganathan, S.; Suwas, Satyam

2010-01-01

The evolution of microstructure and texture during deformation of two-phase (α + β) brass was studied for different initial microstructure and texture. The deformation processing involved unidirectional and multi-step cross-rolling. The bulk textures were determined by measuring the pole figures and calculating the orientation distribution function ODF for both α (fcc) and β (bcc) phases, while the microstructure and other microstructural parameters were measured through optical microscopy and scanning electron microscopy with electron back scatter diffraction (SEM-EBSD). Results indicate that textures developed after unidirectional rolling and multi-step cross-rolling are significantly different. The variation in initial texture had a pronounced effect on the development of texture in the α phase during subsequent deformation.

Effect of mode of rolling on development of texture and microstructure in two-phase ({alpha} + {beta}) brass

Energy Technology Data Exchange (ETDEWEB)

Garg, Rohini; Ranganathan, S. [Department of Materials Engineering, Indian Institute of Science, Bangalore 560012 (India); Suwas, Satyam, E-mail: satyamsuwas@met.iisc.ernet.in [Department of Materials Engineering, Indian Institute of Science, Bangalore 560012 (India)

2010-07-15

The evolution of microstructure and texture during deformation of two-phase ({alpha} + {beta}) brass was studied for different initial microstructure and texture. The deformation processing involved unidirectional and multi-step cross-rolling. The bulk textures were determined by measuring the pole figures and calculating the orientation distribution function ODF for both {alpha} (fcc) and {beta} (bcc) phases, while the microstructure and other microstructural parameters were measured through optical microscopy and scanning electron microscopy with electron back scatter diffraction (SEM-EBSD). Results indicate that textures developed after unidirectional rolling and multi-step cross-rolling are significantly different. The variation in initial texture had a pronounced effect on the development of texture in the {alpha} phase during subsequent deformation.

DESCRIPCIÓN Y ANÁLISIS DE LOS HALLAZGOS DE LAS INVESTIGACIONES HECHAS POR STEFAN TENGBLAD SOBRE LA PRÁCTICA DIRECTIVA HASTA EL AÑO 2014

OpenAIRE

Dulce Romero, Claudia Patricia; Sierra Cagüeñas, Sebastián

2015-01-01

Se realizó el análisis de ocho artículos y un libro escrito por el profesor Stefan Tengblad desde el 2000 hasta el 2012. Durante 12 años, el autor sueco se ha dado la tarea de analizar no solo los resultados obtenidos por los escritores más importantes sobre la práctica directiva, sino que también se puso en la tarea de comparar sus estudios y resultados. En las reseñas reconstructivas se pueden identificar las variables más importantes y las conclusiones que Tengblad obtuvo después de muc...

DP: Parameter Display Page Program

International Nuclear Information System (INIS)

Anderson, M.

1994-01-01

The Parameter Display Page program (DP) is a Motif/X11-based program to allow easily configured, dynamic device and process variable monitoring and manipulation in the EPICS environment. DP provides a tabular data format for interactive viewing and manipulation of device and process variable statistics, as well as formatted PostScript output to files and printers. DP understands and operates in two (unfortunately disjoint at this time) namespaces in the EPICS environment ''devices'' and ''process variables''. The higher level namespace of devices includes Composite and Atomic Devices registered via the Device Access server; the lower level (flat) namespace is that of normal Process Variables accessible via Channel Access

Enhanced Recovery in Tight Gas Reservoirs using Maxwell-Stefan Equations

Science.gov (United States)

Santiago, C. J. S.; Kantzas, A.

2017-12-01

Due to the steep production decline in unconventional gas reservoirs, enhanced recovery (ER) methods are receiving great attention from the industry. Wet gas or liquid rich reservoirs are the preferred ER candidates due to higher added value from natural gas liquids (NGL) production. ER in these reservoirs has the potential to add reserves by improving desorption and displacement of hydrocarbons through the medium. Nevertheless, analysis of gas transport at length scales of tight reservoirs is complicated because concomitant mechanisms are in place as pressure declines. In addition to viscous and Knudsen diffusion, multicomponent gas modeling includes competitive adsorption and molecular diffusion effects. Most models developed to address these mechanisms involve single component or binary mixtures. In this study, ER by gas injection is investigated in multicomponent (C1, C2, C3 and C4+, CO2 and N2) wet gas reservoirs. The competing effects of Knudsen and molecular diffusion are incorporated by using Maxwell-Stefan equations and the Dusty-Gas approach. This model was selected due to its superior properties on representing the physics of multicomponent gas flow, as demonstrated during the presented model validation. Sensitivity studies to evaluate adsorption, reservoir permeability and gas type effects are performed. The importance of competitive adsorption on production and displacement times is demonstrated. In the absence of adsorption, chromatographic separation is negligible. Production is merely dictated by competing effects between molecular and Knudsen diffusion. Displacement fronts travel rapidly across the medium. When adsorption effects are included, molecules with lower affinity to the adsorption sites will be produced faster. If the injected gas is inert (N2), an increase in heavier fraction composition occurs in the medium. During injection of adsorbing gases (CH4 and CO2), competitive adsorption effects will contribute to improved recovery of heavier

Ultrasound-Assisted Transient Liquid Phase Bonding of Magnesium Alloy Using Brass Interlayer in Air

Institute of Scientific and Technical Information of China (English)

Zhiwei Lai; Ruishan Xie; Chuan Pan; Xiaoguang Chen; Lei Liu; Wenxian Wang; Guisheng Zou

2017-01-01

The microstructure evolution and oxide film behavior in ultrasound-assisted transient liquid phase (U-TLP) bonding of Mg alloy were investigated by applying different ultrasonic time at 460℃ withbrass interlayer in air.The results indicated that with increasing ultrasonic time,brass interlayer disappeared gradually and the Mg-Cu-Zn eutectic compounds were formed.The eutectic compounds in the joint decreased as the ultrasonic time increased further.The oxide removal process was divided into four steps.Continuous oxide film at the interface was partially fractured by ultrasonic vibration,and then suspended into liquid by undermining eutectic reaction.After that,the suspended oxide film was broken into small oxide fragments by ultrasonic cavitation effect,which was finally squeezed out of the joint by ultrasonic squeeze action.In addition,the mechanical properties of the joints were investigated.The maximum shear strength of the joint reached 105 MPa,which was 100％ of base metal.

Weber Stefan, Damascus. Ottoman Modernity and Urban Transformation, 1808-1918, Aarhus, Aarhus University Press, 2009, 2 volumes, 464 + 664 p., 7 planches.

Directory of Open Access Journals (Sweden)

Brigitte Marino

2013-01-01

Full Text Available Cet ouvrage monumental en deux volumes est issu d’une thèse de doctorat que Stefan Weber a élaborée alors qu’il était membre du Deutsche Archäologische Institut (DAI, à Damas, et soutenue à l’Université de Berlin en 2001. Comme ses prédécesseurs allemands –d’abord K. Wulzinger et C. Watzinger (1924, puis D. Sack (1989 –, l’auteur apporte une importante contribution à notre connaissance de la ville de Damas. Il s’interroge sur la modernité ottomane qui a transformé la ville au cours du xixe...

Continuum Model for Decontamination of Chemical Warfare Agent from a Rubbery Polymer using the Maxwell-Stefan Formulation

Science.gov (United States)

Varady, Mark; Bringuier, Stefan; Pearl, Thomas; Stevenson, Shawn; Mantooth, Brent

Decontamination of polymers exposed to chemical warfare agents (CWA) often proceeds by application of a liquid solution. Absorption of some decontaminant components proceed concurrently with extraction of the CWA, resulting in multicomponent diffusion in the polymer. In this work, the Maxwell-Stefan equations were used with the Flory-Huggins model of species activity to mathematically describe the transport of two species within a polymer. This model was used to predict the extraction of the nerve agent O-ethyl S-[2(diisopropylamino)ethyl] methylphosphonothioate (VX) from a silicone elastomer into both water and methanol. Comparisons with experimental results show good agreement with minimal fitting of model parameters from pure component uptake data. Reaction of the extracted VX with sodium hydroxide in the liquid-phase was also modeled and used to predict the overall rate of destruction of VX. Although the reaction proceeds more slowly in the methanol-based solution compared to the aqueous solution, the extraction rate is faster due to increasing VX mobility as methanol absorbs into the silicone, resulting in an overall faster rate of VX destruction.

Maxwell–Stefan diffusion and dynamical correlation in molten LiF-KF: A molecular dynamics study

Energy Technology Data Exchange (ETDEWEB)

Jain, Richa Naja, E-mail: ltprichanaja@gmail.com; Chakraborty, Brahmananda; Ramaniah, Lavanya M. [High Pressure & Synchrotron Radiation Physics Division, Bhabha Atomic Research Centre, Trombay, Mumbai-85 (India)

2016-05-23

In this work our main objective is to compute Dynamical correlations, Onsager coefficients and Maxwell-Stefan (MS) diffusivities for molten salt LiF-KF mixture at various thermodynamic states through Green–Kubo formalism for the first time. The equilibrium molecular dynamics (MD) simulations were performed using BHM potential for LiF–KF mixture. The velocity autocorrelations functions involving Li ions reflect the endurance of cage dynamics or backscattering with temperature. The magnitude of Onsager coefficients for all pairs increases with increase in temperature. Interestingly most of the Onsager coefficients has almost maximum magnitude at the eutectic composition indicating the most dynamic character of the eutectic mixture. MS diffusivity hence diffusion for all ion pairs increases in the system with increasing temperature. Smooth variation of the diffusivity values denies any network formation in the mixture. Also, the striking feature is the noticeable concentration dependence of MS diffusivity between cation-cation pair, Đ{sub Li-K} which remains negative for most of the concentration range but changes sign to become positive for higher LiF concentration. The negative MS diffusivity is acceptable as it satisfies the non-negative entropy constraint governed by 2{sup nd} law of thermodynamics. This high diffusivity also vouches the candidature of molten salt as a coolant.

Belgrade as new Jerusalem: Reflections on the reception of a topos in the age of despot Stefan Lazarević

Directory of Open Access Journals (Sweden)

Erdeljan Jelena

2006-01-01

Full Text Available In the Vita of despot Stefan Lazarević, Belgrade is compared to Jerusalem The use of this topos is aimed at a social construction of meaning within the framework of historically determined cultural discourse, based on the premise that culture itself can be observed as a complex system of signs constantly open to redefinition. This implies that the approach to its more profound understanding must rely on a method based on reconceptualization of the problem of text and context. Therefore, the true object of investigation becomes the relation between text and society whose activities are themselves perceived as a sort of behavioral text, in which that relation functions as two homologous systems of signs. As a result, our attention is focused on activities which produce social and cultural phenomena and objects — actually on the means by the use of which a world filled with meaning is created. Apart from texts, those means, as real as the text itself, belong to the instruments of creating sacred space or hierotopy, a phenomenon historically recognized as translatio Hierosolymi. Beyond any doubt, in the eyes of homo medievalis, the absolute paradigm of hierotopic activity is Constantinople the capital of the Empire and universal model through the emulation of which or through the appropriation of whose elements of identity (ranging from cults of saints to visual identity throughout history, and in particular in the later middle ages (especially following the events of 1204, a growing number of other points in the Christian oikoumene gains the status of center as a God-chosen and God-protected place — Arta, Trebizond and Nicea, Paris and Venice, Novgorod and Moscow, to name just the most prominent examples In investigating the case of Belgrade, attention is focused on the modes and vehicles of hierotopy which in the days of despot Stefan Lazarević (1402-1427 were laid as the foundation of likening Belgrade and Jerusalem as the utmost example of

Performance capabilities of EDM of high carbon high chromium steel with copper and brass electrodes

Science.gov (United States)

Surekha, B.; Swain, Sudiptha; Suleman, Abu Jafar; Choudhury, Suvan Dev

2017-07-01

The paper address the statistical modeling of input-output relationships of electric discharge machining. In the present work, peak current (I) pulse on time (T) and gap voltage of electric discharge machining (EDM) process are chosen as control parameters to analyze the performance of the process. The output characteristics, namely radial overcut, electrode wear rate (EWR) and metal removal rate (MRR) are treated as the responses. A full factorial design (FFD) of experiments has been used to conduct the experiments and linear regression models are developed for different process characteristics. While conducting the experiments, high carbon and high chromium steel is considered as work piece material and brass and copper are used as electrode material. It is important to note that the experimental conditions are kept similar while machining with the help of different electrode materials. The data obtained from the experiments has been used to develop the regression models for three process parameters for two electrode materials.

Tribological studies of composite material based on CuZn38Al2Mn1Fe brass strengthened with δ-alumina fibres

Directory of Open Access Journals (Sweden)

J. W. Kaczmar

2010-10-01

Full Text Available The results of tribological studies (friction coefficient, wear resistance of the frictional couple of composite material based on CuZn38Al2Mn1Fe brass strengthened with δ-alumina fibres (Saffil and cast iron are shown in this paper. The wear investigations were conducted applying the tribological pin-on-disc tester and the friction forces between composite materials containing 10 and 20 vol. % of δ-alumina fibres (Saffil and cast iron were registered. Wear was determined on the base of the specimen mass loss after 1, 3,5 and 8.5 km of friction distance.

Standard test method for determining whether gas-leak-detector fluid solutions can cause stress corrosion cracking of brass alloys

CERN Document Server

American Society for Testing and Materials. Philadelphia

2005-01-01

1.1 This test method covers an accelerated test method for evaluating the tendency of gas leak detection fluids (LDFs) to cause stress corrosion cracking (SCC) of brass components in compressed gas service. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Determination of the speed of corrosion of aluminum brass in drinking water

International Nuclear Information System (INIS)

Valcarce, M.B; Vasquez, M; Sanchez, S.R de

2004-01-01

Copper alloys are widely used for water conduits. This work defines the speed of corrosion of aluminum brass (Cu76Zn22Al2) in potable water by comparing the results from electrochemical tests and from weight loss tests. The chosen medium is synthetic drinking water (pH 7.6) whose composition is the average for the drinking water in Mar del Plata city. Coupons were prepared for the weight loss test, which were kept in artificial potable water for 90 days. The flow of corrosion was determined based on the resulting weight loss. After the period of immersion, the coupons showed pitting. The resistance to polarization (Rp) was also determined at different immersion times with potential jumps, potentiodynamic sweeps and electrochemical impedance spectroscopy (EIS). The Rp values obtained with the different electrochemical methods are in agreement, and they increase over time. This increase can be attributed to the growth of a layer of oxide over the metallic surface. Based on the record of polarization curves the Tafel slopes were obtained and the corrosion current was estimated after 2 hrs and 192 hrs of immersion. The corrosion current values obtained for the different electrochemical methods match the results obtained from the weight loss test (CW)

Contribution to the knowledge of the Cu-Sn-Zn system for compositions close to brass alloys

International Nuclear Information System (INIS)

Vilarinho, C.; Soares, D.; Castro, F.

2004-01-01

The effect of tin content in the equilibrium phases of the Cu-Zn-based alloys, within the range of chemical compositions with interest to brass producers is described. For this purpose, ternary alloys with copper contents between 55.4 and 67.5 wt.% and tin contents up to 5.30 wt.% have been studied. The chemical composition of each alloy has been determined by X-ray fluorescence spectrometry (XRF). Isothermal homogenization, followed by rapid cooling, has been employed to determine the equilibrium phases at different temperatures. The homogenized alloys have been observed by scanning electron microscopy and the respective chemical analysis of the phases determined by electron probe microanalysis (EPMA). The statistical analysis of the obtained results enable to correlate the chemical composition of equilibrium phases with temperature. The chemical composition of the three-phase field, for the studied temperatures, has also been determined

Electrochemical performances of diamond-like carbon coatings on carbon steel, stainless steel, and brass

International Nuclear Information System (INIS)

Hadinata, Samuel-Sudibyo; Lee, Ming-Tsung; Pan, Szu-Jung; Tsai, Wen-Ta; Tai, Chen-Yi; Shih, Chuan-Feng

2013-01-01

Diamond-like carbon (DLC) coatings have been deposited onto stainless steel, carbon steel and brass by plasma-enhanced chemical vapor deposition, respectively. Atomic arrangement, chemical structure, surface morphology and cross-section microstructure of the DLC coatings were examined by X-ray diffraction, Raman scattering spectroscopy and scanning electron microscopy. The electrochemical behaviors of the DLC coatings in 3.5 wt.% NaCl solution were investigated by performing an open circuit potential (OCP) measurement and a potentiodynamic polarization test. The experimental results showed that properly deposited DLC coatings could cause an increase of OCP by hundreds of millivolts and a reduction of anodic current density by several orders of magnitude as compared to that of the substrate. The results also demonstrated that electrochemical techniques could be used as tools to detect the soundness of the DLC coating by examining OCP and polarization curve, which varied with the form of defect and depended on the type of substrate. - Highlights: ► The substrate could affect the quality of diamond-like carbon (DLC) coating. ► Defect-free DLC coating exhibited extremely low anodic current density. ► The quality of DLC coating on metal could be evaluated by electrochemical test

Electrochemical performances of diamond-like carbon coatings on carbon steel, stainless steel, and brass

Energy Technology Data Exchange (ETDEWEB)

Hadinata, Samuel-Sudibyo; Lee, Ming-Tsung [Department of Materials Science and Engineering, National Cheng Kung University, 1, Ta-Hsueh Road, Tainan 701, Taiwan (China); Pan, Szu-Jung [Ocean Energy Research Center, Tainan Hydraulics Laboratory, National Cheng Kung University, 1, Ta-Hsueh Road, Tainan 701, Taiwan (China); Tsai, Wen-Ta, E-mail: wttsai@mail.ncku.edu.tw [Department of Materials Science and Engineering, National Cheng Kung University, 1, Ta-Hsueh Road, Tainan 701, Taiwan (China); Ocean Energy Research Center, Tainan Hydraulics Laboratory, National Cheng Kung University, 1, Ta-Hsueh Road, Tainan 701, Taiwan (China); Tai, Chen-Yi [Ocean Energy Research Center, Tainan Hydraulics Laboratory, National Cheng Kung University, 1, Ta-Hsueh Road, Tainan 701, Taiwan (China); Shih, Chuan-Feng [Ocean Energy Research Center, Tainan Hydraulics Laboratory, National Cheng Kung University, 1, Ta-Hsueh Road, Tainan 701, Taiwan (China); Department of Electrical Engineering, National Cheng Kung University, 1, Ta-Hsueh Road, Tainan 701, Taiwan (China)

2013-02-01

Diamond-like carbon (DLC) coatings have been deposited onto stainless steel, carbon steel and brass by plasma-enhanced chemical vapor deposition, respectively. Atomic arrangement, chemical structure, surface morphology and cross-section microstructure of the DLC coatings were examined by X-ray diffraction, Raman scattering spectroscopy and scanning electron microscopy. The electrochemical behaviors of the DLC coatings in 3.5 wt.% NaCl solution were investigated by performing an open circuit potential (OCP) measurement and a potentiodynamic polarization test. The experimental results showed that properly deposited DLC coatings could cause an increase of OCP by hundreds of millivolts and a reduction of anodic current density by several orders of magnitude as compared to that of the substrate. The results also demonstrated that electrochemical techniques could be used as tools to detect the soundness of the DLC coating by examining OCP and polarization curve, which varied with the form of defect and depended on the type of substrate. - Highlights: ► The substrate could affect the quality of diamond-like carbon (DLC) coating. ► Defect-free DLC coating exhibited extremely low anodic current density. ► The quality of DLC coating on metal could be evaluated by electrochemical test.

Process Parameters Optimization for Friction Stir Welding of Pure Aluminium to Brass (CuZn30 using Taguchi Technique

Directory of Open Access Journals (Sweden)

Elfar O. M. R.

2016-01-01

Full Text Available In this research, the friction stir welding of dissimilar commercial pure aluminium and brass (CuZn30 plates was investigated and the process parameters were optimized using Taguchi L9 orthogonal array. The considered process parameters were the rotational speed, traverse speed and pin offset. The optimum setting was determined with reference to ultimate tensile strength of the joint. The predicted optimum value of ultimate tensile strength was confirmed by experimental run using optimum parameters. Analysis of variance revealed that traverse speed is the most significant factor in controlling the joint tensile strength and pin offset also plays a significant role. In this investigation, the optimum tensile strength is 50% of aluminium base metal. Metallographic examination revealed that intermetallic compounds were formed in the interface of the optimum joint where the tensile failure was observed to take place.

Investigation about the influence of the mechanical properties of lead core and brass jacket of a NATO 7.62 mm ball bullet in numerical simulations of ballistic impacts

Directory of Open Access Journals (Sweden)

Scapin M.

2012-08-01

Full Text Available In the present work a validated numerical approach has been used in order to build a robust and reliable FE model of the impact of a NATO 7.62 mm ball bullet, against an aluminium transmission shaft. The bullet is a full metal jacket type, with a lead alloy core and a brass jacket. Target shaft is made by an Al6061-T6 aluminium alloy. According to the soft core (lead alloy of the bullet, most effort has been spent in order to evaluate the effect of bullet materials mechanical properties on the numerical results. Numerical analyses, carried out using the non-linear dynamic finite element solver Abaqus∖Explicit 6.10, have been performed focusing on core and jacket material behaviour (target material, Al6061-T6, has been previously calibrated by the authors. Thus numerical analyses have been performed considering for the mechanical behaviour of the bullet both a simplified approach (as reported in literature and new material data (with strain rate effect obtained by means of experimental tests on the two materials (lead and brass with specimens cut directly from the bullet. Finally the results of the analyses have been compared with real experimental ballistic tests.

The Effects of Voltage and Concentration of Sodium Bicarbonate on Electrochemical Synthesis of Ethanol from Carbon Dioxide Using Brass as Cathode

Science.gov (United States)

Ramadan, Septian; Fariduddin, Sholah; Rizki Aminudin, Afianti; Kurnia Hayatri, Antisa; Riyanto

2017-11-01

The effects of voltage and concentration of sodium bicarbonate were investigated to determine the optimum conditions of the electrochemical synthesis process to convert carbon dioxide into ethanol. The conversion process is carried out using a sodium bicarbonate electrolyte solution in an electrochemical synthesis reactor equipped with a cathode and anode. As the cathode was used brass, while as the anode carbon was utilized. Sample of the electrochemical synthesis process was analyzed by gas chromatography to determine the content of the compounds produced. The optimum electrochemical synthesis conditions to convert carbon dioxide into ethanol are voltage and concentration of sodium bicarbonate are 3 volts and 0.4 M with ethanol concentration of 1.33%.

Identification of Control Parameters for Brass Player’s Embouchure by Measuring Contact Pressure on the Teeth Buccal Surface

Science.gov (United States)

Kourakata, Itaru; Moriyama, Kozo; Hara, Toshiaki

For the technical improvement for brass instrument players it is important to obtain the detailed control parameters for embouchure building. While many investigators have reported the preliminary data on the muscle behavior, the precise aspects are unrevealed so far. The purpose of the present paper is to study dynamic perioral muscle behavior of French horn players and to investigate their lip valve function by measuring the contact pressure on teeth buccal surface during playing. It was shown from the experimental results that the advanced players contracted depressor angulioris and levator angulioris especially for high tone playing. It is considered that the combined contraction by these muscles contributes to forming smaller lip aperture being suitable to produce higher tones. Inversely a strong contraction of m. buccinator, which is widely believed to work to give hard tension to player’s lip, was observed insignificantly in the advanced players.

Evaluation of dislocation density in copper and brass α deformed by XRD peak width analysis

International Nuclear Information System (INIS)

Sousa, Talita Gama de

2014-01-01

The determination of dislocation density in metallic materials has been available for many years in scientific environment. This is due to the fact that the dislocations are the main responsible for plastic deformation, which, thereafter, markedly influences the mechanical properties. In this work, the dislocation density was analyzed through peak broadening of Xray diffraction (XRD) using Convolutional Multiple Whole Profile (CMWP) program. The measurements obtained by XRD were compared with those obtained from images observed by transmission electronic microscopy (TEM). The materials used in this study were pure copper and brass α as alloy 268 (6 % Cu and 34 % Zn), deformed by rolling and ECA (equal channel angular extrusion) processes. The results indicate that the XRD is a powerful tool for the characterization of the microstructure in relation to the dislocation density, as they were consistent to the TEM measurements, and also showed good relationship with measurements of hardness. Furthermore, through the dislocation density it was possible to verify the influence of stacking fault energy (SFE) in the evolution of the copper samples deformation process and its alloy, and that the presence of texture in rolled samples did not impair the measurements obtained by XRD technique. (author)

History of the Botanic Garden of the Stefan Batory University in Vilna (Vilnius (1919–1939 (in Polish

Directory of Open Access Journals (Sweden)

Alicja Zemanek

2016-11-01

Full Text Available The university in Vilna (Lithuanian: Vilnius, now Vilniaus universitetas, founded in 1579 by Stefan Batory (Stephen Báthory, King of Poland and Grand Duke of Lithuania, was a centre of Polish botany in 1780-1832 and 1919-1939. The Botanic Garden established by Jean-Emmanuel Gilibert (1741–1814 in 1781 (or, actually, from 1782 survived the loss of independence by Poland (1795, and a later closure of the University (1832, and it continued to function until 1842, when it was shut down by Russian authorities. After Poland had regained independence and the University was reopened as the Stefan Batory University (SBU, its Botanic Garden was established on a new location (1919, active since 1920. It survived as a Polish institution until 1939. After the Second World War, as a result of changed borders, it found itself in the Soviet Union, and from 1990 – in the Republic of Lithuania. A multidisciplinary research project has been recently launched with the aim to create a publication on the history of science at the Stefan Batory University. The botanical part of the project includes, among others, drafting the history of the Botanic Garden. Obtaining electronic copies of archival documents, e.g. annual reports written by the directors, enabled a more thorough analysis of the Garden’s history. Piotr Wiśniewski (1884–1971, a plant physiologist, nominated as Professor in the Department of General Botany on 1 June 1920, was the organiser and the first director of the Garden. He resigned from his post in October 1923, due to financial problems of the Garden. From October 1923 to April 1924, the management was run by the acting director, Edward Bekier (1883–1945, Professor in the Department of Physical Chemistry, Dean of the Faculty of Mathematics and Natural Sciences. For 13 subsequent years, i.e. from 1 May 1924 to 30 April 1937, the directorship of the Garden was held by Józef Trzebiński (1867–1941, a mycologist and one of the pioneers of

Extending the magnetoelectric efficiency of an MFC/brass/NdFeB energy harvester by coupling a pair of movable magnets

Science.gov (United States)

Leung, Chung Ming; Wang, Ya

2017-10-01

In this letter, an MFC/brass/NdFeB tip magnet three-phase cantilever beam was coupled with a pair of movable magnets to harness energy from alternating magnetic fields. By coupling with a pair of moveable magnets, both bandwidth and magnetoelectric (ME) voltage coefficient (α\\text{V}) were largely increased by 25% and 87.5%, respectively, in comparison with the same harvester coupled with stationary magnets. Such improvements were attributed to magnetic energy introduced by the moving magnets. Experiments also revealed the boundary positions of external magnets (movable and stationary) where the repulsive magnetic forces jumped to the attractive ones, and the stiffness hardening switched to the softening process. These results provided a wide-band nonlinear approach to efficiently harvest/detect the low-frequency alternating magnetic field energies.

Microbiologically influenced corrosion evaluation on brass (UNS C68700, UNS C443) and AISI 316 stainless steel; Estudio de la influencia microbiologica en la corrosion de latones (UNS C68700, UNS C443) y acero inoxidable AISI 316

Energy Technology Data Exchange (ETDEWEB)

Ohanian, M.; Diaz, V.; Corengia, M.; Russi, P.; Pianzzola, M. J.; Menes, R. J.

2014-10-01

Microorganisms may play an important role in the corrosion process and generate conditions which affect the rate and/or the mechanism of deterioration. They become visible by the formation of bio films: clusters of microorganisms and extracellular polymers. These bio films affect not only the durability of the material, but also reduce the heat transfer. The present work studied the growth of aerobic and anaerobic heterotrophic microorganisms and sulfate reducing bacteria on aluminum brass (Uns C.a.), admiralty brass (Uns C.a.) and stainless steel Asi 316 in exposure experiments held in the Bay of Montevideo (Uruguay). The influence of the biofilm growth on the corrosion behavior was studied by electrochemical techniques: polarization curves and Electrochemical Impedance Spectroscopy (Ei). The selection of the most suitable material for the exposure conditions is discussed and hypotheses of the corrosion mechanism are presented. Although stainless steel Asi 316 presented the lowest corrosion rate it showed localized deterioration. (Author)

Densification and volumetric change during supersolidus liquid phase sintering of prealloyed brass Cu28Zn powder: Modeling and optimization

Directory of Open Access Journals (Sweden)

Mohammadzadeh A.

2014-01-01

Full Text Available An investigation has been made to use response surface methodology and central composite rotatable design for modeling and optimizing the effect of sintering variables on densification of prealloyed Cu28Zn brass powder during supersolidus liquid phase sintering. The mathematical equations were derived to predict sintered density, densification parameter, porosity percentage and volumetric change of samples using second order regression analysis. As well as the adequacy of models was evaluated by analysis of variance technique at 95% confidence level. Finally, the influence and interaction of sintering variables, on achieving any desired properties was demonstrated graphically in contour and three dimensional plots. In order to better analyze the samples, microstructure evaluation was carried out. It was concluded that response surface methodology based on central composite rotatable design, is an economical way to obtain arbitrary information with performing the fewest number of experiments in a short period of time.

RhCd{sub 9+δ} (-1.18 ≤δ≤0.29) a γ-brass related cubic giant cell structure

Energy Technology Data Exchange (ETDEWEB)

Jana, Partha Pratim [Indian Institute of Technology, Kharagpur (India). Dept. of Chemistry

2017-09-01

The compound RhCd{sub 9+δ} (-1.18 ≤δ≤0.29) has been synthesized and the average structure has been analyzed by single crystal X-ray diffraction. The average structure crystallizes in the face centered cubic space group F43m (216) and contains ∝405 atoms/unit cell. It represents a (2a{sub γ}){sup 3}-superstructure of cubic γ-brass and is isostructural to Rh{sub 7-x}Mg{sub 44+x}. The comparison between the structures of RhCd{sub 9+δ} and Rh{sub 7-x}Mg{sub 44+x} has been presented using a layer description. The structure of the title phase has also been described by a ''cluster'' concept. The electronic structure of RhCd{sub 9+δ} (-1.18 ≤δ≤0.29) shows that the phase is stabilized by a Hume-Rothery mechanism.

A comparative study of microstructure and mechanical properties between friction stir welded single and double phase brass alloys

International Nuclear Information System (INIS)

Heidarzadeh, A.; Saeid, T.

2016-01-01

This study was done in order to compare the microstructure and mechanical properties of friction stir welded single and double phase brass alloys. The microstructure of the joints were examined using optical microscope, scanning electron microscope (SEM), scanning transmission electron microscope (STEM), and X-ray diffraction. Furthermore, tensile test and fractography were applied to evaluate the mechanical properties of the joints. The results showed that the grain size of the stir zone in the double phase joint was smaller than that of the single phase alloy. In comparison with base metals, both of the joints contained high density of dislocations with a qualitatively similar texture. However, the dislocation density of the double phase joint was somewhat lower than that of the single phase one. Moreover, the joints had higher tensile strength, lower elongation and less ductile fracture compared to their base metals due to their finer grain size and higher dislocation density. The double phase joint had higher strength and lower elongation than single phase joint due to the effect of the second phase.

Eberhard Widmann (Stefan Meyer Institute, Vienna) and Silke Federmann (Ph.D. Student from Vienna in the CERN-Austrian Ph.D. program) together with a microwave cavity developed by Silke at CERN. The cavity will be used for the first time to look for spin-flip transitions of antihydrogen atoms later this year.

CERN Multimedia

Maximilien Brice

2011-01-01

Eberhard Widmann (Stefan Meyer Institute, Vienna) and Silke Federmann (Ph.D. Student from Vienna in the CERN-Austrian Ph.D. program) together with a microwave cavity developed by Silke at CERN. The cavity will be used for the first time to look for spin-flip transitions of antihydrogen atoms later this year.

A comparison of the free vacancy production in α brass by fission reactor neutrons and 14.8-MeV neutrons

International Nuclear Information System (INIS)

Damask, A.C.; Van Konynenburg, R.; Borg, R.J.; Dienes, G.J.

1976-01-01

Enhancement of substitutional diffusion is observed in α brass (30 wt% Zn) by following the decrease in electrical resistivity with neutron irradiation of a thermally equilibrated alloy; the decrease arises from the increase in short-range order. It was determined by previous research that this diffusion enhancement is largely caused by the annealling of radiation-produced vacancies in excess of the thermal equilibrium concentration. Therefore, the results reported here are based upon a well-established technique. The rate of resistivity change per neutron of different energies will give the relative number of free vacancies produced per neutron. This experiment compares the effect of 14.8 MeV neutrons with neutrons from a fission reactor. The results indicate that 14.8 MeV neutrons produce 10 +- 2 times as many free vacancies as reactor neutrons when the latter are expressed in terms of those neutrons with energies greater than 0.1 MeV. (author)

Synthesis of novel ionic liquids and evaluation of their leaching performance in the recovery of copper and zinc from industrial brass slag

International Nuclear Information System (INIS)

Sahina, A.K.; Atalaya, T.S.; Atbakarb, M.; Ocalb, N.; Saridede, M.N.

2016-01-01

Imidazolium-based ionic liquids, 1,3-dibenzylimidazolium trifluoroacetate, 1-benzyl-3-ethylimidazolium trifluoroacetate and 1-benzyl-3-propylimidazolium trifluoroacetate were prepared by simple methods, when compared with those in literature sources, and characterized by IR, NMR and GC-MS and LC-MS. These ILs (Ionic Liquids) were employed as leaching agents in the treatment of industrial copper and zinc bearing slag for the recovery of metals. Results showed that synthesized all novel ionic liquids meet the standard specifications of an ionic liquid. Metal recovery rates decrease with time except for zinc dissolution in 1,3-dibenzylimidazolium trifluoroacetate. 1,3-dibenzylimidazolium trifluoroacetate, when compared with others, is a more effective leaching agent for the treatment of copper and zinc bearing brass slag. Metal recovery rates achieved with this IL are 62.58% for zinc and 24.95% for copper. (Author)

Synthesis of novel ionic liquids and evaluation of their leaching performance in the recovery of copper and zinc from industrial brass slag

Directory of Open Access Journals (Sweden)

Ayfer Kilicarslan Sahin

2016-12-01

Full Text Available Imidazolium-based ionic liquids, 1,3-dibenzylimidazolium trifluoroacetate, 1-benzyl-3-ethylimidazolium trifluoroacetate and 1-benzyl-3-propylimidazolium trifluoroacetate were prepared by simple methods, when compared with those in literature sources, and characterized by IR, NMR and GC-MS and LC-MS. These ILs (Ionic Liquids were employed as leaching agents in the treatment of industrial copper and zinc bearing slag for the recovery of metals. Results showed that synthesized all novel ionic liquids meet the standard specifications of an ionic liquid. Metal recovery rates decrease with time except for zinc dissolution in 1,3-dibenzylimidazolium trifluoroacetate. 1,3-dibenzylimidazolium trifluoroacetate, when compared with others, is a more effective leaching agent for the treatment of copper and zinc bearing brass slag. Metal recovery rates achieved with this IL are 62.58% for zinc and 24.95% for copper.

Synthesis of novel ionic liquids and evaluation of their leaching performance in the recovery of copper and zinc from industrial brass slag

Energy Technology Data Exchange (ETDEWEB)

Sahina, A.K.; Atalaya, T.S.; Atbakarb, M.; Ocalb, N.; Saridede, M.N.

2016-07-01

Imidazolium-based ionic liquids, 1,3-dibenzylimidazolium trifluoroacetate, 1-benzyl-3-ethylimidazolium trifluoroacetate and 1-benzyl-3-propylimidazolium trifluoroacetate were prepared by simple methods, when compared with those in literature sources, and characterized by IR, NMR and GC-MS and LC-MS. These ILs (Ionic Liquids) were employed as leaching agents in the treatment of industrial copper and zinc bearing slag for the recovery of metals. Results showed that synthesized all novel ionic liquids meet the standard specifications of an ionic liquid. Metal recovery rates decrease with time except for zinc dissolution in 1,3-dibenzylimidazolium trifluoroacetate. 1,3-dibenzylimidazolium trifluoroacetate, when compared with others, is a more effective leaching agent for the treatment of copper and zinc bearing brass slag. Metal recovery rates achieved with this IL are 62.58% for zinc and 24.95% for copper. (Author)

Microstructure and Mechanical Properties of Stainless Steel/Brass Joints Brazed by Sn-Electroplated Ag Brazing Filler Metals

Science.gov (United States)

Wang, Xingxing; Peng, Jin; Cui, Datian

2018-05-01

To develop a high-Sn-content AgCuZnSn brazing filler metal, the BAg50CuZn was used as the base filler metal and a Sn layer was electroplated upon it. Then, the 304 stainless steel and the H62 brass were induction-brazed with the Sn-plated brazing filler metals. The microstructures of the joints were examined with an optical microscope, a scanning electron microscope and an x-ray diffractometer. The corresponding mechanical properties were obtained with a universal tensile testing machine. The results indicated that the induction brazed joints consisted of the Ag phase, the Cu phase and the CuZn phase. When the content of Sn in the Sn-plated Ag brazing filler metal was 6.0 or 7.2 wt.%, the Cu5Zn8, the Cu41Sn11 and the Ag3Sn phases appeared in the brazed joint. The tensile strength of the joints brazed with the Sn-plated filler metal was higher compared to the joints with the base filler metal. When the content of Sn was 6.0 wt.%, the highest tensile strength of the joint reached to 395 MPa. The joint fractures presented a brittle mode, mixed with a low amount of ductile fracture, when the content of Sn exceeded 6.0 wt.%.

Stefanův problém vedení tepla s fázovou přeměnou a jeho analytické řešení

OpenAIRE

Kesler, René

2017-01-01

Tato bakalářská práce se zabývá analytickým řešením úloh vedení tepla s fázovou přeměnou, které jsou nazvány jako klasický Stefanův problém. Nejprve je odvozena diferenciální rovnice vedení tepla a také je vytvořen matematický model Stefanova problému. Největší pozornost je následně věnována odvozování analytických řešení pro úlohy, u nichž lze tato řešení nalézt. K implementaci získaných řešení ve vhodném programovacím prostředí bylo zvoleno prostředí MATLAB. Práce také obsahuje popis vytvoř...

Results of the independent radiological verification survey at the former Bridgeport Brass Company Facility, Seymour, Connecticut (SSC001)

International Nuclear Information System (INIS)

Foley, R.D.; Rice, D.E.; Allred, J.F.; Brown, K.S.

1995-03-01

At the request of the USDOE, a team from ORNL conducted an independent radiological verification survey at the former Bridgeport Brass Company Facility, Seymour, Connecticut, from September 1992 to March 1993. Purpose of the survey was to determine whether residual levels of radioactivity inside the Ruffert Building and selected adjacent areas were rmediated to levels below DOE guidelines for FUSRAP sites. The property was contaminated with radioactive residues of 238 U from uranium processing experiments conducted by Reactive Metals, Inc., from 1962 to 1964 for the Atomic Energy Commission. A previous radiological survey did not characterize the entire floor space because equipment which could not be moved at the time made it inaccessible for radiological surveys. During the remediation process, additional areas of elevated radioactivity were discovered under stationary equipment, which required additional remediation and further verification. Results of the independent radiological verification survey confirm that, with the exception of the drain system inside the building, residual uranium contamination has been remediated to levels below DOE guidelines for unrestricted release of property at FUSRAP sites inside and outside the Ruffert Building. However, certain sections of the drain system retain uranium contamination above DOE surface guideline levels. These sections of pipe are addressed in separate, referenced documentation

Determination of the characteristics of a Schottky barrier formed by latent finger mark corrosion of brass

International Nuclear Information System (INIS)

Bond, J W

2009-01-01

The ideality factor (η) and barrier height (φ B ) for a metal-copper(I) oxide rectifying contact formed by the latent finger mark corrosion of α phase brass have been determined from forward bias I/V characteristics in the range 0.4 V ≤ V ≤ 0.55 V. Rectifying contacts formed from the finger mark deposits of different people gave η = 1.5-1.6 ± 0.1 and φ B = 0.49-0.52 ± 0.04 V. A Mott-Schottky plot of capacitance-voltage measurements in reverse bias gave the built in potential ψ bi = 0.4 ± 0.1 V, the gradient of the plot confirming the conductivity of the finger mark corrosion as p type. X-ray photoelectron spectroscopy spectra of the corrosion showed that Cu(I), Cu(II) and Zn(II) can co-exist on the surface, the Cu(I) : Cu(II) and Zn : Cu ratios determining whether a rectifying contact is formed. Initial findings suggest that when the concentration of Cu(I) dominates the Cu(I) : Cu(II) ratio (approximately 6 : 1), or when Cu(II) is absent, a rectifying contact can be formed subject to the Zn : Cu ratio being approximately 1 : 3. As the surface concentration of zinc increases, the rectifying contact is degraded until the concentration of zinc approaches that of copper when no evidence of a Schottky barrier is observed and the contact appears ohmic.

Metadata Design in the New PDS4 Standards - Something for Everybody

Science.gov (United States)

Raugh, Anne C.; Hughes, John S.

2015-11-01

The Planetary Data System (PDS) archives, supports, and distributes data of diverse targets, from diverse sources, to diverse users. One of the core problems addressed by the PDS4 data standard redesign was that of metadata - how to accommodate the increasingly sophisticated demands of search interfaces, analytical software, and observational documentation into label standards without imposing limits and constraints that would impinge on the quality or quantity of metadata that any particular observer or team could supply. And yet, as an archive, PDS must have detailed documentation for the metadata in the labels it supports, or the institutional knowledge encoded into those attributes will be lost - putting the data at risk.The PDS4 metadata solution is based on a three-step approach. First, it is built on two key ISO standards: ISO 11179 "Information Technology - Metadata Registries", which provides a common framework and vocabulary for defining metadata attributes; and ISO 14721 "Space Data and Information Transfer Systems - Open Archival Information System (OAIS) Reference Model", which provides the framework for the information architecture that enforces the object-oriented paradigm for metadata modeling. Second, PDS has defined a hierarchical system that allows it to divide its metadata universe into namespaces ("data dictionaries", conceptually), and more importantly to delegate stewardship for a single namespace to a local authority. This means that a mission can develop its own data model with a high degree of autonomy and effectively extend the PDS model to accommodate its own metadata needs within the common ISO 11179 framework. Finally, within a single namespace - even the core PDS namespace - existing metadata structures can be extended and new structures added to the model as new needs are identifiedThis poster illustrates the PDS4 approach to metadata management and highlights the expected return on the development investment for PDS, users and data

Stefan Banach

Indian Academy of Sciences (India)

proportions; the rule of three and use of simple proportions; inference; ... inally contained a certain number N of matches, what is the probability that there are exactly k ... Ulam discovered the Monte-Carlo method for statistical sampling.

The effect of sequential dual-gas testing on laser-induced breakdown spectroscopy-based discrimination: Application to brass samples and bacterial strains

International Nuclear Information System (INIS)

Rehse, Steven J.; Mohaidat, Qassem I.

2009-01-01

Four Cu-Zn brass alloys with different stoichiometries and compositions have been analyzed by laser-induced breakdown spectroscopy (LIBS) using nanosecond laser pulses. The intensities of 15 emission lines of copper, zinc, lead, carbon, and aluminum (as well as the environmental contaminants sodium and calcium) were normalized and analyzed with a discriminant function analysis (DFA) to rapidly categorize the samples by alloy. The alloys were tested sequentially in two different noble gases (argon and helium) to enhance discrimination between them. When emission intensities from samples tested sequentially in both gases were combined to form a single 30-spectral line 'fingerprint' of the alloy, an overall 100% correct identification was achieved. This was a modest improvement over using emission intensities acquired in argon gas alone. A similar study was performed to demonstrate an enhanced discrimination between two strains of Escherichia coli (a Gram-negative bacterium) and a Gram-positive bacterium. When emission intensities from bacteria sequentially ablated in two different gas environments were combined, the DFA achieved a 100% categorization accuracy. This result showed the benefit of sequentially testing highly similar samples in two different ambient gases to enhance discrimination between the samples.

Conceptual Design of a Clinical BNCT Beam in an Adjacent Dry Cell of the Jozef Stefan Institute TRIGA Reactor

International Nuclear Information System (INIS)

Maucec, Marko

2000-01-01

The MCNP4B Monte Carlo transport code is used in a feasibility study of the epithermal neutron boron neutron capture therapy facility in the thermalizing column of the 250-kW TRIGA Mark II reactor at the Jozef Stefan Institute (JSI). To boost the epithermal neutron flux at the reference irradiation point, the efficiency of a fission plate with almost 1.5 kg of 20% enriched uranium and 2.3 kW of thermal power is investigated. With the same purpose in mind, the TRIGA reactor core setup is optimized, and standard fresh fuel elements are concentrated partly in the outermost ring of the core. Further, a detailed parametric study of the materials and dimensions for all the relevant parts of the irradiation facility is carried out. Some of the standard epithermal neutron filter/moderator materials, as well as 'pressed-only' low-density Al 2 O 3 and AlF 3 , are considered. The proposed version of the BNCT facility, with PbF 2 as the epithermal neutron filter/moderator, provides an epithermal neutron flux of ∼1.1 x 10 9 n/cm 2 .s, thus enabling patient irradiation times of nfast /φ epi -13 Gy.cm 2 /n and [overdot]D γ /φ epi -13 Gy.cm 2 /n), the in-air performances of the proposed beam are comparable to all existing epithermal BNCT facilities. The design presents an equally efficient alternative to the BNCT beams in TRIGA reactor thermal columns that are more commonly applied. The cavity of the dry cell, a former JSI TRIGA reactor spent-fuel storage facility, adjacent to the thermalizing column, could rather easily be rearranged into a suitable patient treatment room, which would substantially decrease the overall developmental costs

Study of the diffusion in the {alpha} brasses, using the evaporation or condensation of zinc - influence of the diffusion sense and of impurities (first and second thesis); Etude de la diffusion dans les laitons {alpha} au moyen des methodes d'evaporation ou de condensation du zinc influence du sens de diffusion et de la presence d'impurete (premiere et deuxieme these)

Energy Technology Data Exchange (ETDEWEB)

Accary, A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1955-12-15

The author develops a zero concentration extrapolation method for the exact determination of the diffusion coefficient. He applies it to the comparison of the inward and outward diffusion coefficient in {alpha} brasses. In a second part he shows the large influence of traces of some elements such as P, As, Sb, on the diffusion velocity in {alpha} brasses. (author) [French] L'auteur montre comment, au moyen d'une extrapolation a variation de concentration nulle, ces methodes permettent d'atteindre rigoureusement la valeur du coefficient de diffusion. Il les utilise pour comparer la valeur du coefficient de diffusion avec enrichissement en zinc a la valeur du coefficient de diffusion avec appauvrissement en zinc. Dans une seconde partie, il met en evidence la grande influence de traces d'elements tels que le phosphore, l'arsenic, l'antimoine sur la vitesse de diffusion dans les laitons {alpha}. (auteur)

Study of the diffusion in the {alpha} brasses, using the evaporation or condensation of zinc - influence of the diffusion sense and of impurities (first and second thesis); Etude de la diffusion dans les laitons {alpha} au moyen des methodes d'evaporation ou de condensation du zinc influence du sens de diffusion et de la presence d'impurete (premiere et deuxieme these)

Energy Technology Data Exchange (ETDEWEB)

Accary, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1955-12-15

The author develops a zero concentration extrapolation method for the exact determination of the diffusion coefficient. He applies it to the comparison of the inward and outward diffusion coefficient in {alpha} brasses. In a second part he shows the large influence of traces of some elements such as P, As, Sb, on the diffusion velocity in {alpha} brasses. (author) [French] L'auteur montre comment, au moyen d'une extrapolation a variation de concentration nulle, ces methodes permettent d'atteindre rigoureusement la valeur du coefficient de diffusion. Il les utilise pour comparer la valeur du coefficient de diffusion avec enrichissement en zinc a la valeur du coefficient de diffusion avec appauvrissement en zinc. Dans une seconde partie, il met en evidence la grande influence de traces d'elements tels que le phosphore, l'arsenic, l'antimoine sur la vitesse de diffusion dans les laitons {alpha}. (auteur)

The ultrasonic copper and brass decontamination study; Etude de la decontamination du cuivre et des laitons en presence d'ultra-sons

Energy Technology Data Exchange (ETDEWEB)

Courtault, J; Kerdelleau, J de; Mestre, E [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1965-07-01

The use of ultra-sounds as a decontamination technic does not bring an absolute solution. As a function of the materials it seemed necessary to find what was the optimum conditions for using the ultra-sounds and to define not only the ultra-sonic factors but also the chemical solutions which bring some appreciable decontamination factors without bringing any too important corrosion processus. This report gives the results of this study applied to copper and brass. This study allowed to select some effective treatment baths on the two types of contamination: plutonium and fission products. (authors) [French] L'emploi des ultra-sons comme technique de decontamination n'amene pas une solution absolue. Il est apparu necessaire de rechercher en fonction de la nature du materiau a decontaminer quelles etaient les conditions optimales d'utilisation des ultra-sons et de definir alors non seulement les facteurs ultrasoniques mais encore les solutions chimiques qui apportent des facteurs de decontamination appreciables sans amener des phenomenes de corrosion trop importants. Ce rapport donne les resultats de cette etude appliquee au cuivre et aux laitons. Cette etude a permis de selectionner des bains de traitement efficaces dans les deux cas de contamination: plutonium et produits de fission. (auteurs)

Defense Scrap Yard Handbook

Science.gov (United States)

1985-06-01

Shall consist of brass castings, rolled brass, rod brass, tubing and 26 Honey . miscellaneous yellow brasses, including plated brass. Must be free of...surveillance. (See torns include: dry cough , irritation of throat and OSHA 1910.1025) tightness of chest leading to difficulty in breath- (1) Lead...selected conditions, e.g., styrene- up the cure of a compound when added in minor acrylonitrile copolymer resins blended with butadi- quantity as compared

Effects of Brass (Cu3Zn2) as High Thermal Expansion Material on Shrink Disc Performance During High Thermal Loading

Science.gov (United States)

Mazlan, MIS; Mohd, SA; Bahar, ND; Aziz, SAA

2018-03-01

This research work is focused on shrink disc operation at high temperature. Geometrical and material design selections have been done by taking into consideration the existing shrink disc operating at high temperature condition. The existing shrink disc confronted slip between shaft and shaft sleeve during thermal loading condition. The assessment has been obtained through virtual experiment by using Finite Element Analysis (FEA) -Thermal Transient Stress for 900 seconds with 300 °C of thermal loading. This investigation consists of the current and improved version of shrink disc, where identical geometries and material properties were utilized. High Thermal Expansion (HTE) material has been introduced to overcome the current design of the shrink disc. Brass (Cu3Zn2) has been selected as the HTE material in the improved shrink disc design due to its high thermal expansion properties. The HTE has shown a significant improvement on the total contact area and contact pressure on the shaft and the shaft sleeve. The improved shrink disc embedded with HTE during thermal loading exhibit a minimum of 1244.1 mm2 of the total area on shaft and shaft sleeve which uninfluenced the total contact area at normal condition which is 1254.3 mm2. Meanwhile, the total pressure of improved shrink disc had an increment of 108.1 MPa while existing shrink disc total pressure has lost 17.2 MPa during thermal loading.

Paul Garrin / Paul Garrin ; interv. Tilman Baumgärtel

Index Scriptorium Estoniae

Garrin, Paul

2006-01-01

1997. a. New York Citys tehtud intervjuu ameerika kunstniku, firma pgMedia rajaja ja omaniku Paul Garriniga (sünd. 1952). P. Garrini videotest, pikemalt videost "Free Society", Internetiga tegelemisest, projektist "Mediafilter", interaktiivsetest installatsioonidest, domeeninimede registreerimise projektist "name.space"

Eros e Thanatos em “Tempos Sombrios”: aspectos da teoria pulsional em diálogo com Stefan Zweig e Hannah Arendt

Directory of Open Access Journals (Sweden)

Érica Schlude Wels

2017-06-01

Full Text Available O presente artigo reflete sobre aspectos ligados à propensão do homem pela destruição e domínio do outro por meio da violência.  Nesse sentido, elencamos reflexões sobre os conceitos psicanalíticos de Eros e Thanatos, além de contribuições do pensamento de Hannah Arendt  (1987; 1995; 1997, sobretudo o conceito de “Banalidade do Mal”;  O mal concretizado pelo nazismo é monstruosamente banal e burocrático, ao mesmo tempo que eficiente e sistemático, levado a cabo por agentes superficiais (LECHTE, 2002.  Buscar-se-á estabelecer um diálogo entre esse arcabouço teórico e três novelas do escritor austríaco Stefan Zweig, ele próprio uma vítima declaradamente pacifista do exílio imposto aos escritores judeus no período da Segunda Guerra:  “A coleção invisível” (2015, [1924], “O Livreiro Mendel” (1999, [1929]  e “Xadrez, uma novela” (2015, [1944] têm a guerra como pano-de-fundo; O presente trabalho objetiva explorar aspectos da chamada “mitologia psicanalítica”, campo definido por Freud como obscuro.  Além do caráter destruidor intrínseco à natureza humana, como postulado nos textos freudianos que abordam a guerra (1916; 1933, [1932], destacamos o protótipo da pulsão de morte: compulsão à repetição e ao retorno do inorgânico, movimento regressivo de retorno a um estado anterior (ROUDINESCO; PLON, 1998.  Ao explorar a teoria das pulsões em seu dualismo Eros/Thanatos, lançamos luzes sobre o que Arendt define como “Tempos sombrios”.

Enhanced photoluminescence and Raman properties of Al-Doped ZnO nanostructures prepared using thermal chemical vapor deposition of methanol assisted with heated brass.

Directory of Open Access Journals (Sweden)

Tamil Many K Thandavan

Full Text Available Vapor phase transport (VPT assisted by mixture of methanol and acetone via thermal evaporation of brass (CuZn was used to prepare un-doped and Al-doped zinc oxide (ZnO nanostructures (NSs. The structure and morphology were characterized by field emission scanning electron microscopy (FESEM and x-ray diffraction (XRD. Photoluminescence (PL properties of un-doped and Al-doped ZnO showed significant changes in the optical properties providing evidence for several types of defects such as zinc interstitials (Zni, oxygen interstitials (Oi, zinc vacancy (Vzn, singly charged zinc vacancy (VZn-, oxygen vacancy (Vo, singly charged oxygen vacancy (Vo+ and oxygen anti-site defects (OZn in the grown NSs. The Al-doped ZnO NSs have exhibited shifted PL peaks at near band edge (NBE and red luminescence compared to the un-doped ZnO. The Raman scattering results provided evidence of Al doping into the ZnO NSs due to peak shift from 145 cm-1 to an anomalous peak at 138 cm-1. Presence of enhanced Raman signal at around 274 and 743 cm-1 further confirmed Al in ZnO NSs. The enhanced D and G band in all Al-doped ZnO NSs shows possible functionalization and doping process in ZnO NSs.

Enhanced photoluminescence and Raman properties of Al-Doped ZnO nanostructures prepared using thermal chemical vapor deposition of methanol assisted with heated brass.

Science.gov (United States)

Thandavan, Tamil Many K; Gani, Siti Meriam Abdul; San Wong, Chiow; Md Nor, Roslan

2015-01-01

Vapor phase transport (VPT) assisted by mixture of methanol and acetone via thermal evaporation of brass (CuZn) was used to prepare un-doped and Al-doped zinc oxide (ZnO) nanostructures (NSs). The structure and morphology were characterized by field emission scanning electron microscopy (FESEM) and x-ray diffraction (XRD). Photoluminescence (PL) properties of un-doped and Al-doped ZnO showed significant changes in the optical properties providing evidence for several types of defects such as zinc interstitials (Zni), oxygen interstitials (Oi), zinc vacancy (Vzn), singly charged zinc vacancy (VZn-), oxygen vacancy (Vo), singly charged oxygen vacancy (Vo+) and oxygen anti-site defects (OZn) in the grown NSs. The Al-doped ZnO NSs have exhibited shifted PL peaks at near band edge (NBE) and red luminescence compared to the un-doped ZnO. The Raman scattering results provided evidence of Al doping into the ZnO NSs due to peak shift from 145 cm-1 to an anomalous peak at 138 cm-1. Presence of enhanced Raman signal at around 274 and 743 cm-1 further confirmed Al in ZnO NSs. The enhanced D and G band in all Al-doped ZnO NSs shows possible functionalization and doping process in ZnO NSs.

Evaluation and characterization of mechanisms controlling fate and effects of Army smokes

Energy Technology Data Exchange (ETDEWEB)

Cataldo, D.A.; Ligotke, M.W.; Bolton, H. Jr.; Fellows, R.J.; Van Voris, P.; McKinley, J.P.; Mi, Shu-mei W.; McFadden, K.M.

1990-08-01

The primary objective of this study was to characterize the fate and response of soil and biotic components of the terrestrial environment to aerosols, deposited brass, and brass in combination with fog oil. Important physical, chemical, and biotic aspects were investigated using an environmental wind tunnel. Air/surface deposition rates were determined for foliar and soil surfaces, both in the absence and presence of fog oil. Deposition velocities for foliage ranged from 0.1 to 1.0 cm/s at wind speeds of 2 to 10 mph, respectively. Foliar contact toxicity was assessed using five different types of terrestrial vegetation representative of Army training sites and surrounding environments. No significant foliar contact toxicity was observed for brass. The weathering and chemistry of brass aerosols deposited and amended to soils was assessed, along with the impacts of acid precipitation and moisture regimes on weathering rates. Rates of brass weathering and the fate of solubilized Cu and Zn are discussed. The influence of soil weathering processes and brass solubilization on seed germination indicated no detectable effects of brass. However, moderate toxicity effects were noted after seed germination indicated no detectable effects of brass. However, moderate toxicity effects were noted after 160 days of soil incubation. The effects were proportional to soil-loading levels. Influence of soil weathering processes and contaminant solubilization on soil microbiological activities indicated that soil dehydrogenase activity was more susceptible to impacts than was phosphatase activity or microbial biomass. Nitrifying bacteria and heterotrophic bacteria were not significantly affected by brass. Invertebrates (earthworms) associated with soil contaminated with brass were only slightly impacted, and only at loading rates >445 {mu}g/cm{sup 2}.

The idea of the perfect city in the state of prince Lazar and despotes Stefan Lazarević

Directory of Open Access Journals (Sweden)

Radojčić Svetozar

2008-01-01

foundations. The new wave of piety originated from the circles of educated refugee monks, who found refuge in the small palaces, where a rather complex, monastic-feudal mentality gradually formed. The palace culture of those centers had their own pious literature, where various visions of the invisible Paradise were particularly widely read. The old idea that all the righteous would attain Heaven gained a new importance and a new interpretation at the end of the XIV century. This faith in the habitation of Heaven began to be linked to buildings on earth - to cities and monasteries. The depiction of Heaven, or the Upper Jerusalem, as it was called, had already begun in Serbian painting in the mid-fourteenth century. Around 1400, however, there was an insistence on presenting how the organization of the palace was similar to the heavenly hierarchy, how the courtiers with their appearance looked like the inhabitants of Paradise, and how the building the royal court erected resembled the heavenly houses of the 'New Jerusalem'. Such descriptions about the resemblance to the dwellings of Heaven were very frequent in Serbian literature of the late fourteenth and early fifteenth centuries. Prince Lazar resorted with increasing frequency to creating buildings according to the image of the 'Upper Jerusalem', especially the monastery of Ravanica. Andonije Epaktit gave the most exhaustive account of Ravanica-Jerusalem: Ravanica was the 'dwelling of God' and the 'door to Heaven', it had seven pinnacles or pyrgoi, and accordingly, it was similar to Jerusalem, Rome and Constantinople, and it was inhabited by monk-angels. Constantme the Philosopher wrote in a similar vein. His magnificent description of Belgrade as Jerusalem in the Life of Despotes Stefan Lazarević falls among the most important eulogies of the cities in Byzantine culture. And Belgrade - like Jerusalem, Rome and Constantinople - has 'seven pinnacles'. It resembles both the 'lower' and the 'higher' Jerusalem; so as to

Condition monitoring and life assessment of lake water cooled admiralty brass condenser tubes of a nuclear power plant

International Nuclear Information System (INIS)

De, P.K.; Ghosal, S.K.; Kutty, K.K.; Bhat, H.R.

2000-01-01

The present paper deals with the failure of condenser tubes in a nuclear power plant. The tubes were made of arsenical admiralty brass and were cooled using lake water. They were in service for over 25 years. So far about 1000 tubes have been plugged as they failed due to several reasons. In order to assess the remaining life of the existing tubes as well as to investigate the cause of recent tube failures, some of the tubes from the condenser were removed and examined in detail following several procedure. It was observed that in general, wall thickness of the tubes was reduced by 10- 15%. Maximum reduction in wall thickness took place near the water inlet ends. No denting type phenomenon was observed at the tube to tube-support plate crevice locations. At certain locations on ID surfaces of some tubes, small steps, 0.2 mm high, were noticed along the longitudinal direction of the tubes. ID surfaces of the tubes were covered with light gray coloured thin and adherent corrosion products decorated with red spots at places. EDAX analysis showed that these red spots were enriched with copper. While some pits were present on the ID surfaces, the OD surfaces were covered with shining black oxide film. Fracture surfaces of the tubes, which had lost much strength and broke while taking them out of the condenser, showed presence of cleavages with fatigue striations near the OD edges. Mechanical properties of the tubes as such had deteriorated significantly. The tubes were observed to have been degraded to a large extent due to localised corrosion on the ID surfaces and corrosion fatigue damage caused by flow induced vibration. Under the present operational conditions, the tubes are expected to perform satisfactorily for a limited period. (author)

The role of local strains from prior cold work on stress corrosion cracking of α-brass in Mattsson's solution

International Nuclear Information System (INIS)

Ulaganathan, Jaganathan; Newman, Roger C.

2014-01-01

The dynamic strain rate ahead of a crack tip formed during stress corrosion cracking (SCC) under a static load is assumed to arise from the crack propagation. The strain surrounding the crack tip would be redistributed as the crack grows, thereby having the effect of dynamic strain. Recently, several studies have shown cold work to cause accelerated crack growth rates during SCC, and the slip-dissolution mechanism has been widely applied to account for this via a supposedly increased crack-tip strain rate in cold worked material. While these interpretations consider cold work as a homogeneous effect, dislocations are generated inhomogeneously within the microstructure during cold work. The presence of grain boundaries results in dislocation pile-ups that cause local strain concentrations. The local strains generated from cold working α-brass by tensile elongation were characterized using electron backscatter diffraction (EBSD). The role of these local strains in SCC was studied by measuring the strain distributions from the same regions of the sample before cold work, after cold work, and after SCC. Though, the cracks did not always initiate or propagate along boundaries with pre-existing local strains from the applied cold work, the local strains surrounding the cracked boundaries had contributions from both the crack propagation and the prior cold work. - Highlights: • Plastic strain localization has a complex relationship with SCC susceptibility. • Surface relief created by cold work creates its own granular strain localization. • Cold work promotes crack growth but several other factors are involved

A Family Finds Its Way

Science.gov (United States)

... conditions as a family. Photo courtesy of Stefan Radtke, www.stefanradtke.com The Woodruffs deal with Bob's ... be as she matures. Photo courtesy of Stefan Radtke, www.stefanradtke.com Do you talk with her ...

Romantiline filosoofia / Aivar Kull

Index Scriptorium Estoniae

Kull, Aivar, 1955-

2004-01-01

Arvustus: Zweig, Stefan. Inimkonna tähetunnid : neliteist ajaloolist miniatuuri / tõlkinud Vilma Jürisalu. Tallinn : Eesti Raamat, 2003. Vaata ka: Kull, Aivar. Kulli pilk. - Tartu : Ilmamaa, 2005, lk. 76-77, pealkirjaga "Stefan Zweigi romantiline ajaloofilosoofia"

Monetary and Fiscal Policy Interactions in the Euro Area

Science.gov (United States)

2004-03-01

Balassa - Samuelson -Effekt, Nr. 3/2002, erschienen in: Stefan Reitz (Hg.): Theoretische und wirtschaftspolitische Aspekte der internatio- nalen Integration...156, 2000, S. 646-660. Friihere Diskussionsbeitriige zur Finanzwissenschaft Josten, Stefan, Crime, Inequality, and Economic Growth. A Classical Argument

A facile approach for the fabrication of 3D flower-like Cu2S nanostructures on brass mesh with temperature-induced wetting transition for efficient oil-water separation

Science.gov (United States)

Niu, Lei; Kang, Zhixin

2017-11-01

3D flower-like Cu2S nanostructures on brass meshes have been fabricated for the first time, with a reversible wetting transition and excellent durability. In the present work, we demonstrated a simple and environmentally-benign method to fabricate the nanostructures utilizing an electrolyte containing CuSO4·5H2O, EDTA-2Na and CH3CSNH2. The superhydrophobicity was achieved by drying thoroughly at 200 °C, instead of using low surface energy materials. After annealing at 300 °C for 6 min, the superhydrophobic surface was oxidized and became superhydrophilic. However, the superhydrophobicity can be restored by heating at 200 °C for several hours. In simpler terms, the reversible wetting transition is responded to the temperature. Scanning electron microscopy, X-ray diffractometer, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy were employed to characterize the surfaces and analyze the wetting transition mechanism. Furthermore, different kinds of oily sewages were separated by as-prepared mesh with high separation efficiency. It is believed that this method should have a promising future in expanding the applications of copper alloys.

Shark: Fast Data Analysis Using Coarse-grained Distributed Memory

Science.gov (United States)

2013-05-01

Schemes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 7.1.1 Java Objects...often MySQL or Derby) with a namespace for tables, table metadata, and par- tition information. Table data is stored in an HDFS directory, while a...saving time and space for large data sets. This is achieved with support for custom SerDe (serialization/deserialization) java interface implementations

Experimental set-up for high-power pulsed X-rays on the basis of a high-current electron accelerator diode with a pointed brass cathode and an aluminum anode target

International Nuclear Information System (INIS)

Goncharov, V.K.; Krekoten', O.V.; Makarov, V.V.

2015-01-01

The main aim of this article is to assess experimentally the possibility for the development and manufacturing of a high-power pulse X-ray source on the basis of a high-current electron accelerator of the diode type. This task was realized using a vacuum diode with the explosive plasma cathode from brass and an anode of aluminum foil 850 microns thick. As a result of the experiments performed, it is shown that, for this metal of the anode, the component of X-rays, propagating along electron beam motion, has bigger energy weight than the reflected one. The photographic paper placed in a black dense paper holder was used as a sensor. It is necessary to mark that at present the current investigations have a purely qualitative character. At the same time, the authors have succeeded to define an angle of divergence (~90°) of the generated radiation after an aluminum target. The possibility of generating bremsstrahlung and also the energy estimates indicate applicability of this installation in pure research, and application-oriented purposes, for example, for monitoring of the radiation stability of different electronic products. (authors)

Oles Have

DEFF Research Database (Denmark)

Boris, Stefan Darlan

2015-01-01

Landskabsarkitekts Ole Mouritsens Have Tjørnegaard er fotograferet gennem et år af Stefan Darlan Boris. Fotografierne er ledsaget af teksten Vejrhaven.......Landskabsarkitekts Ole Mouritsens Have Tjørnegaard er fotograferet gennem et år af Stefan Darlan Boris. Fotografierne er ledsaget af teksten Vejrhaven....

Book Review: Organizations: A Systems Approach

DEFF Research Database (Denmark)

Schoeneborn, Dennis

2016-01-01

Review of: Stefan Kühl: Organizations. A Systems Approach (trans. P. Schmitz). Farnham: Gower Publishing, 2013. 195 pp. £14.99. ISBN 9781472413413.......Review of: Stefan Kühl: Organizations. A Systems Approach (trans. P. Schmitz). Farnham: Gower Publishing, 2013. 195 pp. £14.99. ISBN 9781472413413....

Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys

CERN Document Server

American Society for Testing and Materials. Philadelphia

2011-01-01

1.1 This practice covers the preparation and use of Mattsson's solution of pH 7.2 as an accelerated stress-corrosion cracking test environment for brasses (copper-zinc base alloys). The variables (to the extent that these are known at present) that require control are described together with possible means for controlling and standardizing these variables. 1.2 This practice is recommended only for brasses (copper-zinc base alloys). The use of this test environment is not recommended for other copper alloys since the results may be erroneous, providing completely misleading rankings. This is particularly true of alloys containing aluminum or nickel as deliberate alloying additions. 1.3 This practice is intended primarily where the test objective is to determine the relative stress-corrosion cracking susceptibility of different brasses under the same or different stress conditions or to determine the absolute degree of stress corrosion cracking susceptibility, if any, of a particular brass or brass component ...

Instrumentation Hardware Abstraction Language (IHAL) Handbook

Science.gov (United States)

2017-01-01

WING 96TH TEST WING 412TH TEST WING ARNOLD ENGINEERING DEVELOPMENT COMPLEX NATIONAL AERONAUTICS AND SPACE ADMINISTRATION This page...configuration tool was pre-loaded with an IHAL configuration consisting of one DAU connected to three different analog signal conditioning cards, for a total of...not be illustrated in this handbook. 4 Recall that XML elements and types can include a namespace

Heating Parameter Estimation Using Coaxial Thermocouple Gages in Wind Tunnel Test Articles.

Science.gov (United States)

1984-12-01

Attack a Emissivity G Parameter Vector Pn Measurement Vector at nth Time Point p Density 0 Stefan-Boltzmann Constant 6 Transition Matrix APc Scaling...for. The radiation is modeled using the Stefan-Boltzmann Law, q = 60(U 4 - U, 4 ) (A-9) where 8 radiative emissivity a Stefan-Bol tzmann constant U...w00 I- 000 0 0111c :0 i zZ Z-4lwr I- E . - t J K - IL HHO "W 6i 0WZWZWO&000OW *0 . 0 - .- - -4 4 1"- 1 Lii w LiiU Li LI Li Lij Liw w ~ o 0 0wm ~wW6~w d

Comparison of characteristics parameters in the evaluation of wall thickness diminishing in admiralty brass tubes of the steam condenser, tested by eddy currents

International Nuclear Information System (INIS)

Obrutsky, Alba E.; Mendez, Jorge A.; Acosta, Cesar D.; Scopelliti, Jose D.

1999-01-01

This work is aimed to appraise the measure of the wall thickness diminishing in the signals evaluation obtained in the inspection of steam condenser by eddy currents. In the analysis of the obtained signals were observed in the brass tubes a great quantity of internal defects whose signal indicates that there were diminishing of the wall thickness between 80% and 100%. With all this information and analyzing the data acquired, the tubes with more important indications were selected to make a more exhaustive study of the found defectology. As first test, it was measured the thickness of the worn tubes, comparing them with the original ones that are in stock. It was verified that the tubes separated for this study presented a 30% less thickness in comparison with the new tubes. A semiquantitative chemical test (EDAX) was made to verify if it was the same material. One of the extracted tubes (066 Y1) was reinspected in order to isolate the area with indications. Once this was performed, it was decided to cut the tube to make a visual inspection and to evaluate to what type of defect corresponds to the signals obtained. In the metallography it was confirm that it was a horseshoe type defect. When performing a dimensional control test of the found real defect, it was checked that the information obtained by eddy currents regarding the diminishing of the wall thickness diminishing was valid. At a last stage of the test, it was proceed to make an study and verification of the used parameters, probes, standards and finally determine which shall be the convenient modifications to minimize errors. (author)

Masserepræsentation

DEFF Research Database (Denmark)

Borch, Christian

2014-01-01

Anmeldelse af: Stefan Jonsson, Crowds and Democracy: The Idea and Image of the Masses from Revolution to Fascism. New York & London: Columbia University Press, 2013, 321 sider.......Anmeldelse af: Stefan Jonsson, Crowds and Democracy: The Idea and Image of the Masses from Revolution to Fascism. New York & London: Columbia University Press, 2013, 321 sider....

PELATIHAN TEKNIK ELEKTROPLATING NIKEL BAGI INDUSTRI KERAJINAN KUNINGAN DI DESA KAMASAN KABUPATEN KLUNGKUNG

Directory of Open Access Journals (Sweden)

T. G. Tirta Nindhia

2013-12-01

Full Text Available The Village of Kamasan at Klungkung in the Province of Bali is recognized as a centre of metal handicrafts,especially the handicraft made from brass. Many home industries for the brass handicraft are established in thisvillage. Recently due to Rapid progress of Tourism in Bali, The brass handicraft in Kamasan are growing wellbecause the demand for the souvenir. However some problem arise such as limited of variation, and surface qualityof the brass handicraft that tend to become blurred or dull due to the process of oxidation. This condition makethe brass handicrafts become not so interest as silver handicrafts that can shine for quite long time. To overcomethis problem it is needed to coating the surface of the brass handicrafts so that there will be no contact withoxygen. The coating will be more benefit if able to exhibit more interesting appearance, as what nickel coatingcan affect the appearance of the surface to become like silver but more clear. Equipment for nickel elektroplatingwas designed for this purpose and donated for this purpose. The unique of the equipment that was donated weresmall in size therefore only low electric power is needed, only 1 liter electrolyte was used and can be use manytime. The positive result is obtained for this activity where all participants able to operate the elektroplatingprocess with excellent result.

Lattice Boltzmann model for melting with natural convection

International Nuclear Information System (INIS)

Huber, Christian; Parmigiani, Andrea; Chopard, Bastien; Manga, Michael; Bachmann, Olivier

2008-01-01

We develop a lattice Boltzmann method to couple thermal convection and pure-substance melting. The transition from conduction-dominated heat transfer to fully-developed convection is analyzed and scaling laws and previous numerical results are reproduced by our numerical method. We also investigate the limit in which thermal inertia (high Stefan number) cannot be neglected. We use our results to extend the scaling relations obtained at low Stefan number and establish the correlation between the melting front propagation and the Stefan number for fully-developed convection. We conclude by showing that the model presented here is particularly well-suited to study convection melting in geometrically complex media with many applications in geosciences

Informal Institutions and the Weaknesses of Human Behavior

Science.gov (United States)

2005-01-01

Volkswirtschaftslehre "* Braiuninger, Michael, Social Capital and Regional Mobility, Nr. 4/2002. "* Schdfer, Wolf, EU-Erweiterung: Anmerkungen zum Balassa ... Samuelson -Effekt, Nr. 3/2002, erschienen in: Stefan Reitz (Hg.): Theoretische und wirtschaftspolitische Aspekte der internatio- nalen Integration, Duncker...646-660. Friuhere Diskussionsbeitraige zur Finanzwissenschaft "* Josten, Stefan, Crime, Inequality, and Economic Growth. A Classical Argument for

Influence of bress laminate volume fraction on electromechanical properties of externally laminated coated conductor tapes

Energy Technology Data Exchange (ETDEWEB)

Bautista, Zhierwinjay M.; Shin, Hyung Seop [Dept. of Mechanical Design Engineering, Andong National University, Andong (Korea, Republic of); Lee, Jae Hun; Lee, Hun Ju; Moon, Seung Hyun [SuNAM Co Ltd., Anseong (Korea, Republic of)

2016-09-15

The enhancement of mechanical properties of coated conductor (CC) tapes in practical application are usually achieved by reinforcing through lamination or electroplating metal layers on either sides of the CC tape. Mechanical or electromechanical properties of the CC tapes have been largely affected by the lamination structure under various loading modes such as tension, bending or even cyclic. In this study, the influence of brass laminate volume fraction on electromechanical properties of RCE-DR processed Gadolinium-barium-copper-oxide (GdBCO) CC tapes was investigated. The samples used were composed of single-side and both-side laminate of brass layer to the Cu-stabilized CC tape and their Ic behaviors were compared to those of the Cu-stabilized CC tape without external lamination. The stress/strain dependences of Ic in laminated CC tapes under uniaxial tension were analyzed and the irreversible stress/strain limits were determined. As a result, the increase of brass laminate volume fraction initially increased the irreversible strain limit and became gradual. The corresponding irreversible stress limit, however, showed no difference even though the brass laminate volume fraction increased to 3.4. But the irreversible load limit linearly increased with the brass laminate volume fraction.

Model tests for corrosion influence of electrode surface on electroosmosis in marine sludge

Science.gov (United States)

Zheng, Lingwei; Li, Jinzhu; Shi, Hanru

2017-11-01

The corrosion of metal electrodes is inevitable on electroosmosis in soil. Surface corrosion of electrodes is also one of the reasons for increasing energy consumption in electroosmosis treatment. A series of laboratory tests were conducted employing three kinds of materials, aluminium, steel, and brass. To explore the impact of surface corrosion degree on electroosmosis, metal electrodes were pretreated with durations 0 h, 12 h, 24 h, and 36 h. After the pretreatment, corroded electrodes are used as anodes on electroosmosis. Water discharge, current, voltage potential were measured during the tests; water content was also tested at three points after the electroosmosis. The results showed that aluminium was better than steel in electroosmotic drainage while brass provided the worst dewatering performance. Surface corrosion did not influence the aluminium and steel on electroosmosis in marine sludge, but brass did. In the pretreatment of brass electrodes, corrosion rate had started to slow down at later periods, with the deterioration rate of dewatering reduced afterwards. As the results showed, it is not recommended to employ those easily deteriorated electrode materials from surface corrosion in practical engineering, such as brass; electrode material with higher electroosmosis exchange rate is recommended, such as aluminium.

Shark: SQL and Analytics with Cost-Based Query Optimization on Coarse-Grained Distributed Memory

Science.gov (United States)

2014-01-13

RDBMS and contains a database (often MySQL or Derby) with a namespace for tables, table metadata and partition information. Table data is stored in an...serialization/deserialization) Java interface implementations with corresponding object inspectors. The Hive driver controls the processing of queries, coordinat...native API, RDD operations are invoked through a functional interface similar to DryadLINQ [32] in Scala, Java or Python. For example, the Scala code for

On the treatment of plane fusion front in lumped parameter thermal models with convection

International Nuclear Information System (INIS)

Le Tellier, R.; Skrzypek, E.; Saas, L.

2017-01-01

Highlights: • Solid phase approximations for a two-phase Stefan fusion problem with convection are analyzed. • A reference solution combines integral conservation eqs and a FE solution of the 1D heat equation. • Numerical results are presented for a transient in light water reactor severe accident analysis. • The models performances are highlighted on fusion transients in terms of Biot and Stefan numbers. - Abstract: Within the framework of lumped parameter models for integral codes, this paper focuses on the modeling of a two-phase Stefan fusion problem with natural convection in the liquid phase. In particular, this specific Stefan problem is of interest when studying corium pool behavior in the framework of light water reactor severe accident analysis. The objective of this research is to analyze the applicability of different approximations related to the modeling of the solid phase in terms of boundary heat flux closure relations. Three different approximations are considered: a quadratic profile based model, a model where a parameter controls the power partitioning at the interface and the steady state conduction assumption. These models are compared with an accurate front-tracking solution of this plane fusion front problem. This “reference” is obtained by combining the same integral conservation equations as the approximate models with a mesh-based solution of the 1D heat equation. Numerical results are discussed for a typical configuration of interest for corium pool analysis. Different fusion transients (constructed from nondimensionalization considerations in terms of Biot and Stefan numbers) are used in order to highlight the potential and limitations of the different approximations.

Tortoiseshell or Polymer? Spectroscopic Analysis to Redefine a Purported Tortoiseshell Box with Gold Decorations as a Plastic Box with Brass.

Science.gov (United States)

Pereira, António; Caldeira, Ana Teresa; Maduro, Belmira; Vandenabeele, Peter; Candeias, António

2016-01-01

possible biofilm composition and understand the role of microorganisms in the biodeterioration process. Using these methodologies, the box was correctly identified as being made of cellulose acetate plastic with brass decorations and the white film was identified as being composed mainly of polymer exudates, namely sulphonamides and triphenyl phosphate. © The Author(s) 2015.

Entering of Stefan Dušan into the Empire

Directory of Open Access Journals (Sweden)

Pirivatrić Srđan

2007-01-01

Full Text Available At the moment when, in October 1341, a new Civil War broke out in the Byzantium after the death of Andronicus III, the traditional views of the imperial power and the Empire underwent considerable changes. The powers of the co-rulers had been on the rise since 1272, and during the Civil War of 1321-1328 the Byzantine Empire was in effect divided, that is, two Basileis were ruling 'imperially' (autokratorikōs over their respective territories within the formally unified Empire, under the scope of relations of Superior basileus - co-basileus. Therefore, the Empire (autokratoria, imperium could multiply in the sense of rulers’ authorities, and be divided in the sense of territoriality. The imperial power and the Empire became subject to family relations and family law. In view of the family connections between the Byzantine Emperors (basileis autokratores and the monarchs of the neighboring countries and nations, the right to succession was being used as an argument in some disputes between the rulers. The Byzantine law, that is the Byzantine political views, allowed for the possibility of the so-called 'joint rule' (e oikeia arch by a Byzantine basileus autokrator and some other, foreign member of the dynasty ruling over certain region of the Byzantine Empire - a foreign ruler would be allowed to rule on condition that the Byzantine basileus be recognized as the supreme master. This scenario is known from one recorded dispute between the Byzantine basileus Andronicus III and the Bulgarian tsar Michael Assen III dating from 1328, when the Bulgarian Emperor did not accept the Byzantine rule, however. All these circumstances are of special importance since they directly precede the King Stefan Dušan’s involvement in the Civil War, that is, his later entering into the Empire. The first phase of Dušan’s involvement in the Civil War is typically conquering and opportunistic in nature, with the aim of immediate territorial enlargement. The

Data-Driven RDF Property Semantic-Equivalence Detection Using NLP Techniques

OpenAIRE

Rico, Mariano; Mihindukulasooriya, Nandana; Gómez-Pérez, A.

2016-01-01

DBpedia extracts most of its data from Wikipedia’s infoboxes. Manually-created “mappings” link infobox attributes to DBpedia ontology properties (dbo properties) producing most used DBpedia triples. However, infoxbox attributes without a mapping produce triples with properties in a different namespace (dbp properties). In this position paper we point out that (a) the number of triples containing dbp properties is significant compared to triples containing dbo properties for the DBpedia instan...

Recommendations for the Technical Infrastructure for Standardized International Rights Statements

OpenAIRE

Charles, Valentine; Cowles, Esmé; Estlund, Karen; Isaac, Antoine; Johnson, Tom; Matienzo, Mark A.; Peiffer, Patrick; Urban, Richard J.; Zeinstra, Maarten

2015-01-01

This white paper is the product of a joint Digital Public Library of America (DPLA)-Europeana working group organized to develop minimum rights statement metadata standards for organizations that contribute to DPLA and Europeana. This white paper deals specifically with the technical infrastructure of a common namespace (rightsstatements.org) that hosts the rights statements to be used by (at minimum) the DPLA and Europeana. These recommendations for a common technical infrastructure for righ...

Dynamic measurement of mercury adsorption and oxidation on activated carbon in simulated cement kiln flue gas

DEFF Research Database (Denmark)

Zheng, Yuanjing; Jensen, Anker Degn; Windelin, Christian

2012-01-01

of the sulfite converter is short and typically within 2min. Dynamic mercury adsorption and oxidation tests on commercial activated carbons Darco Hg and HOK standard were performed at 150°C using simulated cement kiln gas and a fixed bed reactor system. It is shown that the converter and analyzer system...... are still under development and are investigated in this work. A commercial red brass converter was tested at 180°C and it was found that the red brass chips work in nitrogen atmosphere only, but do not work properly under simulated cement kiln flue gas conditions. Test of the red brass converter using only...... elemental mercury shows that when HCl is present with either SO2 or NOx the mercury measurement after the converter is unstable and lower than the elemental mercury inlet level. The conclusion is that red brass chips cannot fully reduce oxidized mercury to elemental mercury when simulated cement kiln gas...

The Corrosion Inhibition Characteristics of Sodium Nitrite Using an On-line Corrosion Rate Measurement System

International Nuclear Information System (INIS)

Park, Mal-Yong; Kang, Dae-Jin; Moon, Jeon-Soo

2015-01-01

An on-line corrosion rate measurement system was developed using a personal computer, a data acquisition board and program, and a 2-electrode corrosion probe. Reliability of the developed system was confirmed with through comparison test. With this system, the effect of sodium nitrite (NaNO 2 ) as a corrosion inhibitor were studied on iron and aluminum brass that were immersed in sodium chloride (NaCl) solution. Corrosion rate was measured based on the linear polarization resistance method. The corrosion rates of aluminum brass and iron in 1% NaCl solutions were measured to be 0.290 mm per year (mmpy) and 0.2134 mmpy, respectively. With the addition of 200 ppm of NO 2 - , the corrosion rates decreased to 0.0470 mmpy and 0.0254 mmpy. The addition of NO 2 - caused a decrease in corrosion rates of both aluminum brass and iron, yet the NO 2 - acted as a more effective corrosion inhibitor for iron. than aluminum brass

APPLICATION OF THE X-RAY STRUCTURE ANALYSIS FOR IMPROVEMENT OF TECHNOLOGICAL PROCES- SES OF WIRE PRODUCTION AT BMZ

Directory of Open Access Journals (Sweden)

D. V. Kuznetsov

2012-01-01

Full Text Available The X-ray diffraction methods of qualitative and quantative analysis of phase composition of the brass coating, scale on the surface of brass wire, rod, patented wire, methods of determining the characteristics of the microstrains the lattice ferritic matrix pearlitic high-carbon steel, are explored.

29 CFR 1910.111 - Storage and handling of anhydrous ammonia.

Science.gov (United States)

2010-07-01

... threaded. Threaded connections shall not be back-welded. Brass, copper, or galvanized steel pipe shall not be used. (v) Tubing made of brass, copper, or other material subject to attack by ammonia shall not... shall be provided against container flotation wherever sufficiently high flood water might occur. (vii...

Symbolic dynamics and description of complexity

International Nuclear Information System (INIS)

Hao Bailin.

1992-10-01

Symbolic dynamics provides a general framework to describe complexity of dynamical behaviour. After a discussion of the state of the filed special emphasis will be made on the role of transfer matrix (the Stefan matrix) both in deriving the grammar from known symbolic dynamics and in extracting the rules from experimental data. The block structure of the Stefan matrix may serve as another indicator of complexity of the associated dynamics. (author). 33 refs, 6 figs

The Ukrainian Crisis and European Security: Implications for the United States and U.S. Army

Science.gov (United States)

2015-01-01

14 Chris Giles and Stefan Wagstyl, “IMF Warns of Third Eurozone Recession Since Finan- cial Crisis,” Financial Times, October 8, 2014. 15 Ulrich...Jones, and Kathrin Hille, “Russian Air Incursions Rattle Baltic States,” Financial Times, September 25, 2014. 25 Andrew Higgins , “Tensions Surge in...Opening of the Munich Security Conference, January 31, 2014. Giles, Chris , and Stefan Wagstyl, “IMF Warns of Third Eurozone Recession Since Financial

Tribological characterization of TiN coatings prepared by magnetron sputtering

Science.gov (United States)

Makwana, Nishant S.; Chauhan, Kamlesh V.; Sonera, Akshay L.; Chauhan, Dharmesh B.; Dave, Divyeshkumar P.; Rawal, Sushant K.

2018-05-01

Titanium nitride (TiN) coating deposited on aluminium and brass pin substrates using RF reactive magnetron sputtering. The structural properties and surface morphology were characterized by X-ray diffraction (XRD), atomic force microscope (AFM) and field emission scanning electron microscope (FE-SEM). There was formation of (101) Ti2N, (110) TiN2 and (102) TiN0.30 peaks at 3.5Pa, 2Pa and 1.25Pa sputtering pressure respectively. The tribological properties of coating were inspected using pin on disc tribometer equipment. It was observed that TiN coated aluminium and brass pins demonstrated improved wear resistance than uncoated aluminium and brass pins.

The difference between standing and sitting in 3 different seat inclinations on abdominal muscle activity and chest and abdominal expansion in woodwind and brass musicians

Directory of Open Access Journals (Sweden)

Bronwen Jane Ackermann

2014-08-01

Full Text Available Wind instrumentalists require a sophisticated functioning of their respiratory system to control their air stream, which provides the power for optimal musical performance. The air supply must be delivered into the instrument in a steady and controlled manner and with enough power by the action of the expiratory musculature to produce the desired level of sound at the correct pitch. It is suggested that playing posture may have an impact on the abdominal muscle activity controlling this expired air, but there is no research on musicians to support this theory. This study evaluated chest and abdominal expansion, via respiratory inductive plethysmography, as well as activation patterns of lower and upper abdominal musculature, using surface electromyography, during performance of a range of typical orchestral repertoire by 113 woodwind and brass players. Each of the five orchestral excerpts was played in one of four randomly allocated postures: standing; sitting flat; sitting inclined forwards; and sitting inclined backwards.Musicians showed a clear preference for playing in standing rather than sitting. In standing, the chest expansion range and maximum values were greater (p<0.01, while the abdominal expansion was less than in all sitting postures (p<0.01. Chest expansion patterns did not vary between the three sitting postures, while abdominal expansion was reduced in the forward inclined posture compared to the other sitting postures (p<0.05. There was no significant variation in abdominal muscle activation between the sitting postures, but the level of activation in sitting was only 2/3 of the significantly higher level observed in standing (p<0.01.This study has demonstrated significant differences in respiratory mechanics between sitting and standing postures in wind musicians during playing of typical orchestral repertoire. Further research is needed to clarify the complex respiratory mechanisms supporting musical performance.

77 FR 40897 - Notice of Intent to Repatriate Cultural Items: Gregg County Historical Museum, Longview, TX

Science.gov (United States)

2012-07-11

... and thereafter, six unassociated funerary objects were removed from burials at the C.D. Marsh site... piece of sheet brass, and 1 brass musket butt plate. The Millsey Williamson site dates to A.D. 1650-1800..., the Late-Historic Caddo period. Sometime between the mid-1950s and the mid-1960s, six unassociated...

Passivation of Cu-Zn alloy on low carbon steel electrodeposited from a pyrophosphate medium

Science.gov (United States)

Yavuz, Abdulcabbar; Yakup Hacıibrahimoğlu, M.; Bedir, Metin

2018-01-01

The motivation of this study is to understand whether zinc-based alloy also has a passivation behaviour similar to zinc itself. Cu-Zn alloys were electrodeposited potentiostatically from a pyrophosphate medium on a carbon steel electrode and their corrosion behaviours were studied. Pt and carbon steel electrodes were used in order to examine the corrosion/passivation behaviour of bare Cu, bare Zn and Cu-Zn alloy coatings. The passivation behaviour of all brass-modified electrodes having Zn content between 10% and 100% was investigated. The growth potential affects the morphology and structure of crystals. The brass coatings are more porous than their pure components. The crystalline structure of Cu-Zn alloys can be obtained by changing the deposition potential. The zinc content in brass increases when the deposition voltage applied decreases. However, the growth potential and the ratio of zinc in brass do not affect the passivation behaviour of the resulting alloys. The coatings obtained by applying different growth potentials were immersed in tap water for 24 h to compare their corrosion behaviours with carbon steel having pitting formation.

Contact area measurements on structured surfaces

DEFF Research Database (Denmark)

Kücükyildiz, Ömer Can; Jensen, Sebastian Hoppe Nesgaard; De Chiffre, Leonardo

In connection with the use of brass specimens featuring structured surfaces in a tribology test, an algorithm was developed for automatic measurement of the contact area by optical means.......In connection with the use of brass specimens featuring structured surfaces in a tribology test, an algorithm was developed for automatic measurement of the contact area by optical means....

Conditioning of uranium-containing technological radioactive waste

International Nuclear Information System (INIS)

Smodis, B.; Tavcar, G.; Stepisnik, M.; Pucelj, B.

2006-01-01

Conditioning of mostly liquid uranium containing technological radioactive waste emerging from the past research activities at the Jozef Stefan Institute is described. The waste was first thoroughly characterised, then the radionuclides present solidified by appropriate chemical treatment, and the final product separated and prepared for storage in compliance with the legislation. The activities were carried out within the recently renewed Hot Cells Facility of the Jozef Stefan Institute and the overall process resulted in substantial volume reduction of the waste initially present. (author)

Botanical Collections of Brass

NARCIS (Netherlands)

Brass, L.J.

1966-01-01

Earliest collections, made in southeastern parts of Queensland, were not numbered in sequence, and probably no duplicates were kept. Serious collecting began in 1919, when a start was made in sending specimens to C.T. White at the Queensland Herbarium.

Ombud’s Corner: Bystanders, you can have a role too

CERN Multimedia

Sudeshna Datta-Cockerill

2015-01-01

If you find yourself repeatedly witnessing a situation of inter personal conflict or tension between other colleagues, you have a choice: you can either turn a blind eye to it or you can try to help. In the latter case, you may wish to get another perspective or some guidance before taking steps.   Stefan, Paul and Lucas work together on a challenging project. Over time, Lucas has started to notice Paul’s verbally aggressive behaviour towards Stefan: he frequently criticises him in public, cuts him short at meetings when he is trying to make his point and is known to make derogatory remarks about him behind his back. Stefan does not seem to react but the tension between them is evident and Lucas feels increasingly uncomfortable in their company. It is never easy to know whether or not to intervene in these delicate situations, and the ‘bystander effect’ - where people do nothing - tends to prevail in most workplace cultures. Bystanders hesitate to act because th...

Laser-Neuron Interaction with Femtosecond Beat-Modulated 800-1200 nm Photon Beams, as the Treatment of Brain Cancer Tissue. Laser Neurophysics

Science.gov (United States)

Stefan, V. Alexander

2011-03-01

I propose a novel mechanism for the brain cancer tissue treatment: nonlinear interaction of ultrashort pulses of beat-photon, (ω1 -- ω2) , or double-photon, (ω1 +ω2) , beams with the cancer tissue. The multiphoton scattering is described via photon diffusion equation. The open-scull cerebral tissue can be irradiated with the beat-modulated photon pulses with the laser irradiances in the range of a few mW/cm2 , and repetition rate of a few 100s Hz generated in the beat-wave driven free electron laser. V. Stefan, B. I. Cohen, and C. Joshi, Nonlinear Mixing of Electromagnetic Waves in PlasmasScience 27 January 1989: V. Alexander Stefan, Genomic Medical Physics: A New Physics in the Making, (S-U-Press, 2008).} This highly accurate cancer tissue ablation removal may prove to be an efficient method for the treatment of brain cancer. Work supported in part by Nikola Tesla Laboratories (Stefan University), La Jolla, CA.

Ärge eelistage kodumaist! / Stefan Andersson

Index Scriptorium Estoniae

Andersson, Stefan

2010-01-01

Autor arvab, et tarbija ülesanne on vaadata ka toote hinda ja kvaliteeti, mitte lihtsalt tootja geograafilist asukohta. Nii saame tarbijatena selliseid tootjaid, keda väärime, hind ja kvaliteet paraneb, majanduse efektiivsus kasvab. Riigi ülesanne on tagada õiglane konkurents ja reguleerida turgu

Induction brazing of complex joints

DEFF Research Database (Denmark)

Henningsen, Poul; Zhang, Wenqi; Bay, Niels

2003-01-01

, or if the hottest area is located outside the joint interface, a number of defects may appear: the braze metal may flow away from the joint, the flux may burn off, poor binding of the braze metal may appear or the braze metal may be overheated. Joint geometry as well as electro-magnetic properties of the work piece...... presents a combined numerical and experimental method for fast determination of appropriate coil geometry and position in induction brazing tube-to-plate joints of different ratios between tube and plate thickness and different combinations of the materials stainless steel, brass and copper. The method has...... proven to give successful results in brazing tube-plate joints of copper-brass, copper-stainless steel, stainless steel-brass, and stainless steel-stainless steel....

Program 6 Technical Interchange Meeting Proceedings

Science.gov (United States)

1992-10-01

Buteau PRC (703)556-1355 Gary R. Dolson PRC (703) 5561859 David J. Gray Sterling (315)336-0500 Noreen S. Heyda Harris (407)984-6384 Jay Jesse GTE (719)570...Reed Sterling John Sautter Sterling (315)336-0500 Kevin Sculley PRC (402)291-5533 Stefan Shrier MRJ (703)934-9249 Peter Soliz Orion (505)262-2260...4730 Howard A. Melching GTE (719)570-8898 Noreen S. Heyda Harris (407)984-6384 Jonathan H. Reed Harris (407)984-6008 Stefan Shrier MRJ (703) 934-9249

In situ chemical state analysis of buried polymer/metal adhesive interface by hard X-ray photoelectron spectroscopy

International Nuclear Information System (INIS)

Ozawa, Kenichi; Kakubo, Takashi; Shimizu, Katsunori; Amino, Naoya; Mase, Kazuhiko; Ikenaga, Eiji; Nakamura, Tetsuya; Kinoshita, Toyohiko; Oji, Hiroshi

2014-01-01

Highlights: • Chemical state analysis of the buried rubber/brass interface is conducted by HAXPES. • Ultrathin rubber films are prepared on the brass surface by two methods. • A high density of Cu 2 S is found on the rubber side of the buried adhesive layer. • The chemical states of the buried and exposed interfaces are compared. - Abstract: Chemical state analysis of adhesive interfaces is important to understand an adhesion mechanism between two different materials. Although photoelectron spectroscopy (PES) is an ideal tool for such an analysis, the adhesive interfaces must be exposed to the surface because PES is essentially a surface sensitive technique. However, an in situ observation is possible by hard X-ray PES (HAXPES) owing to its large probing depth. In the present study, HAXPES is applied to investigate the adhesive interface between rubber and brass without exposing the interface. It is demonstrated that copper sulfides formed at the buried rubber/brass interface are distinguished from S-containing species in the rubber overlayer. The chemical state of the buried interface is compared with that of the “exposed” interface prepared by so-called a filter-paper method

Deposition of corrosion products from dowels on human dental root surfaces measured with proton microprobe technique

International Nuclear Information System (INIS)

Brune, D.; Brunell, G.; Lindh, U.

1982-01-01

Distribution of copper, mercury and zinc on human teeth root surfaces adjacent to dowels of gold alloy or brass as well as dowels of brass in conjunction with an amalgam crown has been measured with a proton microprobe using PIXE techniques. Upper limits of the contents of gold and silver on the root surfaces were established. Pronounced concentration profiles of copper and zinc were observed on the root surfaces of teeth prepared with dowels of brass. The dowel of gold alloy revealed only zinc deposition. The major part of copper on the root surfaces is assumed to arise from corrosion of the dowels, and has been transported to the surface by diffusion through the dential tubuli. Zinc in the volume analysed is a constituent of dentin tissue as well as a corrosion product of the brass dowel. Part of the zinc level could also be ascribed to erosion of the zinc phosphate cement matrix. The volumes analysed were (25 x 25 x 25)μm 3 . The levels of copper, mercury and zinc on the tooth root surfaces attained values up to about 200, 20 and 600 ppm, respectively. (orig.)

Deposition of corrosion products from dowels on human dental root surfaces measured with proton microprobe technique

Science.gov (United States)

Brune, D.; Brunell, G.; Lindh, U.

1982-06-01

Distribution of copper, mercury and zinc on human teeth root surfaces adjacent to dowels of gold alloy or brass as well as dowels of brass in conjunction with an amalgam crown has been measured with a proton microprobe using PIXE techniques. Upper limits of the contents of gold and silver on the root surfaces were established. Pronounced concentration profiles of copper and zinc were observed on the root surfaces of teeth prepared with dowels of brass. The dowel of gold alloy revealed only zinc deposition. The major part of copper on the root surfaces is assumed to arise from corrosion of the dowels, and has been transported to the surface by diffusion through the dential tubuli. Zinc in the volume analysed is a constituent of dentin tissue as well as a corrosion product of the brass dowel. Part of the zinc level could also be ascribed to erosion of the zinc phosphate cement matrix. The volumes analysed were (25×25×25)μm 3. The levels of copper, mercury and zinc on the tooth root surfaces attained values up to about 200, 20 and 600 ppm, respectively.

Cohesion and coordination effects on transition metal surface energies

Science.gov (United States)

Ruvireta, Judit; Vega, Lorena; Viñes, Francesc

2017-10-01

Here we explore the accuracy of Stefan equation and broken-bond model semiempirical approaches to obtain surface energies on transition metals. Cohesive factors are accounted for either via the vaporization enthalpies, as proposed in Stefan equation, or via cohesive energies, as employed in the broken-bond model. Coordination effects are considered including the saturation degree, as suggested in Stefan equation, employing Coordination Numbers (CN), or as the ratio of broken bonds, according to the bond-cutting model, considering as well the square root dependency of the bond strength on CN. Further, generalized coordination numbers CN bar are contemplated as well, exploring a total number of 12 semiempirical formulations on the three most densely packed surfaces of 3d, 4d, and 5d Transition Metals (TMs) displaying face-centered cubic (fcc), body-centered cubic (bcc), or hexagonal close-packed (hcp) crystallographic structures. Estimates are compared to available experimental surface energies obtained extrapolated to zero temperature. Results reveal that Stefan formula cohesive and coordination dependencies are only qualitative suited, but unadvised for quantitative discussion, as surface energies are highly overestimated, favoring in addition the stability of under-coordinated surfaces. Broken-bond cohesion and coordination dependencies are a suited basis for quantitative comparison, where square-root dependencies on CN to account for bond weakening are sensibly worse. An analysis using Wulff shaped averaged surface energies suggests the employment of broken-bond model using CN to gain surface energies for TMs, likely applicable to other metals.

Aplikasi Cetakan Permanen untuk Meningkatkan Produksi dan Kualitas Produk IKM Pengecoran Logam Kuningan di Ngawen, Sidokarto, Godean, Yogyakarta

Directory of Open Access Journals (Sweden)

Suyitno Suyitno

2016-12-01

Full Text Available Small and Medium Enterprises (SME brass foundry in Ngawen Sidokarto, District of Godean, Sleman, Yogyakarta mostly produced cow necklace accessories (klonthong and jathilan accessories (klinthing. Te industry and business management are arranged within the scope of family. Te products are relatively low in quality and its market share is limited and tend to be traditional. Tis condition is caused by the weak knowledge of the management and the method of casting metals and metal science. Brass casting methode, that was used at IKM partner, is casting with mold of sand or soil. Tis process requires the making process of sand molds, that is removed afer the brass solidify. For large quantities products, this process is inefcient and takes a long time. It would require a more efcient and faster method in the production process. Method of sand casting and ceramics have been used by SMEs cast brass in Yogyakarta, however it  has many disadvantages in terms of increased productivity and quality as well as the expansion of product applications. Te permanent mold casting of iron is a casting method which has many advantages over other methods, but the use for SMEs has not been applied in the SME of cast brass. Te permanen mold casting methods was introduced to SME partners. Tis replaces the sand mold materials and molding sand. It is expected the casting process is faster because the mold can be used for a large number of products. Te results show that the application of the technology results in products with precision and consistent in shape and size. Community Service of UGM with Appropriate Technology has also collaborated with  Industry and Trade service of Yogyakarta donation of production machinery for making permanent mold. It can be concluded that the application of permanen mold in the brass foundry industry improve the product precision and the speed of produsction.

Annäherung Approaching

Directory of Open Access Journals (Sweden)

Carola Hilmes

2007-03-01

Full Text Available Das von Stefan Moses zusammengestellte „Bilderbuch“ zeigt Fotos von Ilse Aichinger. Sie selbst kommt durch eine Reihe von Geschichten und Gedichten zu Wort. In diesen intimen Dialog werden auch die Leser/-innen einbezogen. Das ermöglicht Annäherung.This “Picture Book”, compiled by Stefan Moses, displays photographs of Ilse Aichinger. She is also given voice through a series of stories and poems. The reader is also drawn into this intimate dialogue, thus making it possible for image, text, and reader to converge.

Experiences with electrochemical analysis of copper at the PPB-level in saline cooling water and in the water/steam cycle

Energy Technology Data Exchange (ETDEWEB)

Thomsen, K [I/S Nordjyllandsvaerket, Vodskov (Denmark)

1996-12-01

Determination of trace amounts of copper in saline cooling water and in process water by differential pulse anodic stripping voltammetry combined with an UV-photolysis pretreatment is described. Copper concentrations well below 1 {mu}g/L may be analysed with a precision in the order of 10% and a high degree of accuracy. The basic principles of the method are described together with three applications covering analysis of cooling and process water samples. The analysis method has been applied to document the adherence of environmental limits for the copper uptake of cooling water passing brass condensers, to monitor the formation of protective layers of iron oxides on the cooling water side of brass condensers, and to study the transport of copper in water/steam cycles with heat exchangers and condensers of brass materials. (au)

Evaluation of the contact switch materials in high voltage power supply for generate of underwater shockwave by electrical discharge

Directory of Open Access Journals (Sweden)

K Higa

2016-10-01

Full Text Available We have developed the high voltage power-supply unit by Cockcroft-Walton circuit for ingenerate high pressure due to underwater shockwave by electrical discharge. This high voltage power supply has the problem of the metal contact switch operation that contact switch stop by melting and bonding due to electrical spark. We have studied the evaluation of materials of contact switch for the reducing electrical energy loss and the problem of contact switch operation. In this research, measurement of discharge voltage and high pressure due to underwater shockwave was carried out using the contact switch made of different materials as brass plate, brass-carbon plate-brass and carbon block. The contact switch made of carbon is effective to reduce energy loss and problem of contactor switch operation.

Effect of the Heat Flux Density on the Evaporation Rate of a Distilled Water Drop

Directory of Open Access Journals (Sweden)

Ponomarev Konstantin

2016-01-01

Full Text Available This paper presents the experimental dependence of the evaporation rate of a nondeaerated distilled water drop from the heat flux density on the surfaces of non-ferrous metals (copper and brass. A drop was placed on a heated substrate by electronic dosing device. To obtain drop profile we use a shadow optical system; drop symmetry was controlled by a high-speed video camera. It was found that the evaporation rate of a drop on a copper substrate is greater than on a brass. The evaporation rate increases intensively with raising volume of a drop. Calculated values of the heat flux density and the corresponding evaporation rates are presented in this work. The evaporation rate is found to increase intensively on the brass substrate with raising the heat flux density.

Laser Stimulated Genomic Exchange in Stem Cells. Laser Non-cloning Techniques

Science.gov (United States)

Stefan, V. Alexander

2012-02-01

I propose a novel technique for a pluripotent stem cell generation. Genomic exchange is stimulated by the beat-wave free electron laser, (B-W FEL), frequency matching with the frequencies of the DNAootnotetextJ.D. Watson and F. H. C. Crick, Nature, 171, 737-738 (1953). eigen-oscillations. B-W FEL-1ootnotetextV. Stefan, B.I.Cohen, C. Joshi Science, 243,4890, (Jan 27,1989); Stefan, et al., Bull. APS. 32, No. 9, 1713 (1987); Stefan, APS March-2011, #S1.143; APS- March-2009, #K1.276. scans entire stem cell; B-W FEL-2 probes the chromosomes. The scanning and probing lasers: 300-500nm and 100-300nm, respectively; irradiances: the order-of-10s mW/cm^2 (above the threshold value for a particular gene structure); repetition rate of few-100s Hz. A variety of genetic-matching conditions can be arranged. Genomic glitches, (the cell nucleus transferootnotetextScott Noggle et al. Nature, 478, 70-75 (06 October 2011).), can be hedged by the use of lasers.

A Windows Phone 7 Oriented Secure Architecture for Business Intelligence Mobile Applications

Directory of Open Access Journals (Sweden)

Silvia TRIF

2011-01-01

Full Text Available This paper present and implement a Windows Phone 7 Oriented Secure Architecture for Business Intelligence Mobile Application. In the developing process is used a Windows Phone 7 application that interact with a WCF Web Service and a database. The types of Business Intelligence Mobile Applications are presented. The Windows mobile devices security and restrictions are presented. The namespaces and security algorithms used in .NET Compact Framework for assuring the application security are presented. The proposed architecture is showed underlying the flows between the application and the web service.

Effects of Si on the microstructure, ordering transformation and properties of the Cu60Zn40 alloy

International Nuclear Information System (INIS)

Doostmohammadi, Hamid; Moridshahi, Hamid

2015-01-01

Highlights: • A duplex brass (Cu 60 Zn 40 ) was developed by additions of Si. • Phase fractions in the microstructure were changed and β phase was increased. • Microstructural changes were discussed by electron to atom ratio. • Dilatometric showed that Si increased the ordering temperature of β to β′. • The developed lead-free brass alloy can find application in machining. - Abstract: Effects of small additions of Si to Cu 60 Zn 40 on the properties, microstructure and phase transformation were investigated. It was found that Si promotes the formation of β′ phase and the microstructure of the alloys was changed from duplex α + β′ to single phase β′ brass. Electron to atom ratio was calculated and it was concluded that increment in this ratio led to a decrease in stacking fault energy which had an important role in reduction of the grain size as well microstructural variations in this study. The dilatomeric analysis showed that Si increased the ordering temperature of Cu 60 Zn 40 alloy. Finally, based on the properties, the Cu–Zn 40 –Si alloys are predicted to have the potential of being an alternative for free cutting leaded brass

Grain refinement of permanent mold cast copper base alloys. Final report

Energy Technology Data Exchange (ETDEWEB)

Sadayappan, M.; Thomson, J. P.; Elboujdaini, M.; Gu, G. Ping; Sahoo, M.

2004-04-29

Grain refinement behavior of copper alloys cast in permanent molds was investigated. This is one of the least studied subjects in copper alloy castings. Grain refinement is not widely practiced for leaded copper alloys cast in sand molds. Aluminum bronzes and high strength yellow brasses, cast in sand and permanent molds, were usually fine grained due to the presence of more than 2% iron. Grain refinement of the most common permanent mold casting alloys, leaded yellow brass and its lead-free replacement EnviroBrass III, is not universally accepted due to the perceived problem of hard spots in finished castings and for the same reason these alloys contain very low amounts of iron. The yellow brasses and Cu-Si alloys are gaining popularity in North America due to their low lead content and amenability for permanent mold casting. These alloys are prone to hot tearing in permanent mold casting. Grain refinement is one of the solutions for reducing this problem. However, to use this technique it is necessary to understand the mechanism of grain refinement and other issues involved in the process. The following issues were studied during this three year project funded by the US Department of Energy and the copper casting industry: (1) Effect of alloying additions on the grain size of Cu-Zn alloys and their interaction with grain refiners; (2) Effect of two grain refining elements, boron and zirconium, on the grain size of four copper alloys, yellow brass, EnviroBrass II, silicon brass and silicon bronze and the duration of their effect (fading); (3) Prediction of grain refinement using cooling curve analysis and use of this method as an on-line quality control tool; (4) Hard spot formation in yellow brass and EnviroBrass due to grain refinement; (5) Corrosion resistance of the grain refined alloys; (6) Transfer the technology to permanent mold casting foundries; It was found that alloying elements such as tin and zinc do not change the grain size of Cu-Zn alloys

On portraits in Ravanica

Directory of Open Access Journals (Sweden)

Starodubcev Tatjana

2012-01-01

Full Text Available This research examines a badly washed-out portrait composition of Prince Lazar, Princess Milica and their sons, Stefan and Vuk, in the Ravanica church. The opinion is that it was not painted later, over the original layer of the frescoes, but that it was made simultaneously with the other wall paintings of the lowest zones of the church. Considering the age of Stefan represented in the portrait composition, it is assumed that the decoration of the church was completed around 1385. [Projekat Ministarstva nauke Republike Srbije, br. 177036: Srpska srednjovekovna umetnosti njen evropski kontekst

One-dimensional diffusion model in an Inhomogeneous region

CSIR Research Space (South Africa)

Fedotov, I

2006-01-01

Full Text Available ) of these atoms. The enthalpy of formation of free atoms, ∆H, can vary between 50 and 300 kJ.mol-1. The ballast is heated by radiation from the walls of the atomizer, and its temperature, Tb(t), is given by the Stefan-Boltzmann equation [4...]: ( )ddt T t E c S V T t T tb b b b b b w b( ) ( ) ( )= −σ ρ 4 4 (6) where σ is the Stefan-Boltzmann constant, Eb is the emissivity of the ballast material, cb is the heat capacity of ballast material, ρb...

Induction Brazing

DEFF Research Database (Denmark)

Henningsen, Poul

, or if the hottest area is located outside the joint interface, a number of defects may appear: the braze metal may flow away from the joint, the flux may burn off, poor binding of the braze metal may appear or the braze metal may be overheated. Joint geometry as well as electro-magnetic properties of the work piece...... presents a combined numerical and experimental method for determination of appropriate/optimiged coil geometry and position in induction brazing tube-to-plate joints of different ratios between tube and plate thickness and different combinations of the materials stainless steel, brass and copper....... The method has proven to give successful results in brazing tube-plate joints of copper-brass, copper-stainless steel, stainless steel-brass, and stainless steel-stainless steel. A new design of an adjustable flux concentrator for induction heating tube-to-plate joints is proposed and tested on a variety...

Effect of sponge ball cleaning on removing vernacles in condenser tubes

International Nuclear Information System (INIS)

Mimura, Keisuke; Minamoto, Kenju; Kyohara, Shigeru

1977-01-01

Usually aluminum brass material is adopted for the condenser tubes in thermal and nuclear power stations today, and sea water is treated with chlorine for the purpose of smooth operation and maintenance, but recently, this treatment tends to be avoided in view of environment preservation. When the chlorine treatment is not carried out, vernacles and other marine living things adhere to the internal surfaces of condenser tubes, and the corrosion of the tubes and the lowering of heat transfer rate occur. In this study, sponge ball cleaning was selected as the method of mechanically removing the adhering living things in tubes. When the balls are used too frequently, the formation of protective film is hindered, and the corrosion of tubes is accelerated, therefore it is important to determine the optimal frequency. The model condenser test and the immersion test of aluminum brass and titanium tubes were carried out. The testing method, the operation record and the test results are reported. Vernacles are apt to adhere to titanium tubes rather than aluminum brass tubes, and in case of aluminum brass tubes, they adhere to those with iron hydroxide film rather than those as manufactured. Vernacles adhere more as the flow speed in tubes is lower and the number of larvae in water is more. It was confirmed that the sponge ball cleaning was extremely effective for removing vernacles. (Kako, I.)

Effect of sponge ball cleaning on removing vernacles in condenser tubes

Energy Technology Data Exchange (ETDEWEB)

Mimura, K; Minamoto, K; Kyohara, S [Kobe Steel Ltd. (Japan)

1977-01-01

Usually aluminum brass material is adopted for the condenser tubes in thermal and nuclear power stations today, and sea water is treated with chlorine for the purpose of smooth operation and maintenance, but recently, this treatment tends to be avoided in view of environment preservation. When the chlorine treatment is not carried out, vernacles and other marine living things adhere to the internal surfaces of condenser tubes, and the corrosion of the tubes and the lowering of heat transfer rate occur. In this study, sponge ball cleaning was selected as the method of mechanically removing the adhering living things in tubes. When the balls are used too frequently, the formation of protective film is hindered, and the corrosion of tubes is accelerated, therefore it is important to determine the optimal frequency. The model condenser test and the immersion test of aluminum brass and titanium tubes were carried out. The testing method, the operation record and the test results are reported. Vernacles are apt to adhere to titanium tubes rather than aluminum brass tubes, and in case of aluminum brass tubes, they adhere to those with iron hydroxide film rather than those as manufactured. Vernacles adhere more as the flow speed in tubes is lower and the number of larvae in water is more. It was confirmed that the sponge ball cleaning was extremely effective for removing vernacles.

Synthesis, characterization and corrosion inhibition efficiency of N-(4-(Morpholinomethyl Carbamoyl Phenyl Furan-2-Carboxamide

Directory of Open Access Journals (Sweden)

N. Zulfareen

2016-01-01

Full Text Available A mannich base namely N-(4-(Morpholinomethyl Carbamoyl Phenyl Furan-2-Carboxamide (MFC was synthesized and characterized by FT-IR, 1H NMR, and 13C NMR. The molecular weight of MFC was confirmed by LC-MS. The inhibition effect of MFC on brass in 1 M HCl medium has been investigated by weight loss measurement, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS and cyclic voltametry (CV. Thermodynamic parameters such as free energy, entropy and enthalpy were calculated to describe the mechanism of corrosion inhibitor. The inhibition efficiency of MFC increases with increase in concentration and temperature ranges from 30 °C to 60 °C. Polarization measurements indicated that MFC acts as a mixed type corrosion inhibitor. AC impedance indicates that Rct value increases with increase in the concentration of inhibitor. CV reveals that the oxidation of the copper is controlled by the addition of inhibitor on the brass metal. Surface analysis using scanning electron microscope (SEM shows a significant morphological improvement on the brass surface with the addition of the inhibitor. The adsorption of MFC on brass obeys Langmuir adsorption isotherm. The molecular structure of MFC was distorted to quantum chemical indices using density functional theory (DFT which indicates that the inhibition efficiency of MFC is closely related to quantum parameters.

Eesti vajab kavalust / Imbi Paju, Stefan Brunow

Index Scriptorium Estoniae

Paju, Imbi, 1959-

2008-01-01

Ajakirjanikud leiavad, et Eesti propaganda peaks seoses Venemaaga olema rafineeritum ning toetama eestivenelaste identiteeti nende venekeelsete kaudu, kes kannavad endas euroopalikke väärtusi ja on Eestile lojaalsed

Eletrodissolução de ligas de latão empregando sistemas de análise em fluxo para a determinação de cobre, zinco e chumbo por ICP-AES Electrodissolution of brasses alloys employing flow systems for determination of copper, zinc and lead by ICP-AES

Directory of Open Access Journals (Sweden)

Ana Paula G. Gervasio

1999-09-01

Full Text Available An on-line electrodissolution procedure implemented in a flow injection system for determination of copper, zinc and lead in brasses alloys by ICP-AES is described. Sample dissolution procedure was carried out by using a PTFE chamber and a DC power supply with constant current. Solid sample was attached to chamber as anode and a gold tubing coupled in the chamber was used as cathode. An electrolytic solution flowing through the gold tubing closed the electric circuit with sample, in order to provide condition for electric dissolution when the DC power supply was switched on. The best results were achieved by using a 1.5 mol l-1 nitric acid solution as electrolyte and a 2.5 A current intensity. The procedure presented a good performance characterized by a relative standard deviation better than < 5% (n=5 and a sample throughput of 180 determinations per hour for Cu, Zn and Pb. Results were in agreement with those obtained by conventional acid dissolution (99% confidence level.

Enhancing radiative energy transfer through thermal extraction

Directory of Open Access Journals (Sweden)

Tan Yixuan

2016-06-01

Full Text Available Thermal radiation plays an increasingly important role in many emerging energy technologies, such as thermophotovoltaics, passive radiative cooling and wearable cooling clothes [1]. One of the fundamental constraints in thermal radiation is the Stefan-Boltzmann law, which limits the maximum power of far-field radiation to P0 = σT4S, where σ is the Boltzmann constant, S and T are the area and the temperature of the emitter, respectively (Fig. 1a. In order to overcome this limit, it has been shown that near-field radiations could have an energy density that is orders of magnitude greater than the Stefan-Boltzmann law [2-7]. Unfortunately, such near-field radiation transfer is spatially confined and cannot carry radiative heat to the far field. Recently, a new concept of thermal extraction was proposed [8] to enhance far-field thermal emission, which, conceptually, operates on a principle similar to oil immersion lenses and light extraction in light-emitting diodes using solid immersion lens to increase light output [62].Thermal extraction allows a blackbody to radiate more energy to the far field than the apparent limit of the Stefan-Boltzmann law without breaking the second law of thermodynamics.

EOS developments

Science.gov (United States)

Sindrilaru, Elvin A.; Peters, Andreas J.; Adde, Geoffray M.; Duellmann, Dirk

2017-10-01

CERN has been developing and operating EOS as a disk storage solution successfully for over 6 years. The CERN deployment provides 135 PB and stores 1.2 billion replicas distributed over two computer centres. Deployment includes four LHC instances, a shared instance for smaller experiments and since last year an instance for individual user data as well. The user instance represents the backbone of the CERNBOX service for file sharing. New use cases like synchronisation and sharing, the planned migration to reduce AFS usage at CERN and the continuous growth has brought EOS to new challenges. Recent developments include the integration and evaluation of various technologies to do the transition from a single active in-memory namespace to a scale-out implementation distributed over many meta-data servers. The new architecture aims to separate the data from the application logic and user interface code, thus providing flexibility and scalability to the namespace component. Another important goal is to provide EOS as a CERN-wide mounted filesystem with strong authentication making it a single storage repository accessible via various services and front- ends (/eos initiative). This required new developments in the security infrastructure of the EOS FUSE implementation. Furthermore, there were a series of improvements targeting the end-user experience like tighter consistency and latency optimisations. In collaboration with Seagate as Openlab partner, EOS has a complete integration of OpenKinetic object drive cluster as a high-throughput, high-availability, low-cost storage solution. This contribution will discuss these three main development projects and present new performance metrics.

[Jesuits Chemists of Hapsburg Monarchy].

Science.gov (United States)

Južnič, Stanislav

2016-01-01

The achievements of the Jesuits from the Austrian and Bohemian provinces, who have published books on chemistry are focused. Their links with the area of today's Slovenia are particularly exposed. The guidelines which have enabled prompt victories of the ideas about the structure of matter of Jesuit Ru|er Bokovi are indicated. Inconceivable fast spread of Bošković's adherents in the Hapsburg monarchy is compared with a similar rapid introduction of the kinetic theories of atoms of Slovene Jožef Stefan and Ludwig Boltzmann in the same geographical area. Boltzmann was not only Stefan's best student, but he also married a half Slovenian maid.

Pitfalls of tungsten multileaf collimator in proton beam therapy

Energy Technology Data Exchange (ETDEWEB)

Moskvin, Vadim; Cheng, Chee-Wai; Das, Indra J. [Department of Radiation Oncology, Indiana University School of Medicine, Indianapolis, Indiana 46202 (United States) and Indiana University Health Proton Therapy Center (Formerly Midwest Proton Radiotherapy Institute), Bloomington, Indiana 47408 (United States)

2011-12-15

Purpose: Particle beam therapy is associated with significant startup and operational cost. Multileaf collimator (MLC) provides an attractive option to improve the efficiency and reduce the treatment cost. A direct transfer of the MLC technology from external beam radiation therapy is intuitively straightforward to proton therapy. However, activation, neutron production, and the associated secondary cancer risk in proton beam should be an important consideration which is evaluated. Methods: Monte Carlo simulation with FLUKA particle transport code was applied in this study for a number of treatment models. The authors have performed a detailed study of the neutron generation, ambient dose equivalent [H*(10)], and activation of a typical tungsten MLC and compared with those obtained from a brass aperture used in a typical proton therapy system. Brass aperture and tungsten MLC were modeled by absorber blocks in this study, representing worst-case scenario of a fully closed collimator. Results: With a tungsten MLC, the secondary neutron dose to the patient is at least 1.5 times higher than that from a brass aperture. The H*(10) from a tungsten MLC at 10 cm downstream is about 22.3 mSv/Gy delivered to water phantom by noncollimated 200 MeV beam of 20 cm diameter compared to 14 mSv/Gy for the brass aperture. For a 30-fraction treatment course, the activity per unit volume in brass aperture reaches 5.3 x 10{sup 4} Bq cm{sup -3} at the end of the last treatment. The activity in brass decreases by a factor of 380 after 24 h, additional 6.2 times after 40 days of cooling, and is reduced to background level after 1 yr. Initial activity in tungsten after 30 days of treating 30 patients per day is about 3.4 times higher than in brass that decreases only by a factor of 2 after 40 days and accumulates to 1.2 x 10{sup 6} Bq cm{sup -3} after a full year of operation. The daily utilization of the MLC leads to buildup of activity with time. The overall activity continues to increase

Review of Enabling Technologies to Facilitate Secure Compute Customization

Energy Technology Data Exchange (ETDEWEB)

Aderholdt, Ferrol [Tennessee Technological University; Caldwell, Blake A [ORNL; Hicks, Susan Elaine [ORNL; Koch, Scott M [ORNL; Naughton, III, Thomas J [ORNL; Pelfrey, Daniel S [ORNL; Pogge, James R [Tennessee Technological University; Scott, Stephen L [Tennessee Technological University; Shipman, Galen M [ORNL; Sorrillo, Lawrence [ORNL

2014-12-01

High performance computing environments are often used for a wide variety of workloads ranging from simulation, data transformation and analysis, and complex workflows to name just a few. These systems may process data for a variety of users, often requiring strong separation between job allocations. There are many challenges to establishing these secure enclaves within the shared infrastructure of high-performance computing (HPC) environments. The isolation mechanisms in the system software are the basic building blocks for enabling secure compute enclaves. There are a variety of approaches and the focus of this report is to review the different virtualization technologies that facilitate the creation of secure compute enclaves. The report reviews current operating system (OS) protection mechanisms and modern virtualization technologies to better understand the performance/isolation properties. We also examine the feasibility of running ``virtualized'' computing resources as non-privileged users, and providing controlled administrative permissions for standard users running within a virtualized context. Our examination includes technologies such as Linux containers (LXC [32], Docker [15]) and full virtualization (KVM [26], Xen [5]). We categorize these different approaches to virtualization into two broad groups: OS-level virtualization and system-level virtualization. The OS-level virtualization uses containers to allow a single OS kernel to be partitioned to create Virtual Environments (VE), e.g., LXC. The resources within the host's kernel are only virtualized in the sense of separate namespaces. In contrast, system-level virtualization uses hypervisors to manage multiple OS kernels and virtualize the physical resources (hardware) to create Virtual Machines (VM), e.g., Xen, KVM. This terminology of VE and VM, detailed in Section 2, is used throughout the report to distinguish between the two different approaches to providing virtualized execution

Investigation of effective forensic cleaning methods for bullet and cartridge case samples

Science.gov (United States)

Shuherk, Cassie Marie

Bullet and cartridge case evidence may potentially link weapons and crimes through the comparison of toolmark patterns. This analysis relies on the clarity of the toolmarks and the ability of the examiner to identify patterns on the evidence. These patterns may be distorted by debris such as soil, blood, cyanoacrylate, and construction materials. Despite the potential importance of bullet and cartridge case evidence, few investigations of proper cleaning methods have been conducted. The present study was designed to examine the effects of various cleaning solutions and application methods on copper and brass bullets and cartridge cases. Additionally, this research investigated the efficacy of these cleaning protocols on the common evidence contaminants blood and cyanoacrylate. No cleaning method was found to be universally effective on both contaminant types and nondestructive to the metal surface. Ultrasonication was the most efficient application method employed when used in conjunction with an appropriate cleaning solution. Acetone proved to be safe and successful at removing heavy cyanoacrylate deposits from brass cartridge cases without damaging the metal. Although sulfuric acid removed most of the cyanoacrylate from the brass cartridge case, ultrasonication of the fumed cartridge cases in sulfuric acid caused the nickel-plated primer caps to turn black. Additionally, etching occurred when sulfuric acid was allowed to dry on the cartridge case surface. Citric acid, salt-flour-vinegar paste, TergazymeRTM, and water did not effectively remove the cyanoacrylate from the cartridge cases, but the solutions were safe to use on the brass and sometimes resulted in a shinier surface. Regardless of the cleaning method employed, the bloodstained bullets retained most or all of the underlying brown tarnish. Ultrasonication with sulfuric acid was successful at removing some blood-initiated tarnishing; however, the removal of residues was not complete, making it difficult

Implementing Environmental Management Accounting: Status and Challenges

DEFF Research Database (Denmark)

Cost Accounting - and its Interaction with Eco-Efficiency Performance Measurement and Indicators; Stefan Schaltegger and Marcus Wagner. 4. Environmental Accounting Dimensions: Pros and Cons of Trajectory Convergence and Increased Efficiency; Pontus Cerin and Staffan Laestadius. 5. Process and Content......Table of contents Preface. 1. Environmental Management Accounting: Innovation or Managerial Fad?; Pall Rikhardsson, Martin Bennett, Jan Jaap Bouma and Stefan Schaltegger. Section 1 Progress. 2. Challenges for Environmental Management Accounting; Roger L. Burritt 3. Current Trends in Environmental......: Visualizing the Policy Challenges of Environmental Management Accounting; Dick Osborn. Section 2 Exploring EMA implementation issues. 6. Environmental Performance and the Quality of Corporate Environmental Reports: The Role of Environmental Management Accounting; Marcus Wagner. 7. Environmental Risk...

Public opinion about nuclear energy. Year 2005 poll

International Nuclear Information System (INIS)

Istenic, R.; Jencic, I.

2005-01-01

Public information is one of the important permanent activities of the Nuclear Training Centre Milan Copic at Jozef Stefan Institute in Ljubljana. It is focused on youngsters and about one half of every generation of schoolchildren in Slovenia is informed on nuclear energy. Every year since 1993 we poll youngsters using the same basic set of questions. For comparison we also polled professionals (our colleagues at the Jozef Stefan Institute) using the same questionnaire. Opinion of youngsters about nuclear energy in Slovenia can be considered favourable now (71 %), but the trend is negative. The support is dropping from initial 83% for two consecutive years. Opposition to NPP Krsko operation remains low. (author)

Search for prompt neutrinos and new penetrating particles from 28-GeV proton-nucleus collisions

International Nuclear Information System (INIS)

Soukas, A.; Wanderer, P.; Weng, W.; Bregman, M.; Claudson, M.; LoSecco, J.; Rivkin, L.; Roeder, J.; Russek, S.; Sulak, L.; Timbie, P.; Yudis, M.; Gabriel, T.A.; Galik, R.S.; Horstkotte, J.; Knauer, J.; Levine, M.; Williams, H.H.

1980-01-01

This paper describes a search for weakly or semistrongly interacting particles produced in the collision of 4.9 x 10 18 28-GeV protons with a thick copper and brass beam stop. 104 events have been observed; their characteristics are similar to those produced by neutrinos arising from proton interactions in a 15-cm-thick brass target. However, compared to the number expected, an excess of 48 events is found with uncertainties of +- 10 (statistical) and +- 12 (systematic). At most ten events (68% confidence level) are attributable to beam losses

Process Optimization of EDM Cutting Process on Tool Steel using Zinc Coated Electrode

Directory of Open Access Journals (Sweden)

Hanizam H.

2017-01-01

Full Text Available In WEDM machining process, surface finish quality depends on intensity and duration of spark plasma. Electrode wire diameter has significant effect on the spark intensity and yet the studies on this matter still less. Therefore, the main objectives of this studies are to compare the different diameters of zinc coated and uncoated brass electrode on H13 tool steel surface roughness. The experiments were conducted on Sodick VZ300L WEDM and work piece material of tool steel AISI H13 block. Electrode of zinc coated brass with diameters of 0.1 mm, 0.2 mm, 0.25 mm and uncoated brass 0.2 mm were used. The surface roughness of cutting was measured using the SUR-FTEST SJ-410 Mitutoyo, surface roughness tester. The results suggest that better surface roughness quality can be achieved through smaller electrode wire diameter. The zinc coated improves flushing ability and sparks intensity resulting in better surface finish of H13 tool steel. New alloys and coating materials shall be experimented to optimized the process further.

Festivali budushtshego leta / Eteri Kekelidze

Index Scriptorium Estoniae

Kekelidze, Eteri, 1944-

2008-01-01

27. märtsil algavast 10. Baltoscandali teatrifestivalist Rakveres ja festivali raames toimuud esimesest etendusest "Cargo Sofia-Tallinn" (teose idee ja lavastuse autorid Stefan Kaegi ja Jörg Karrenbauer

Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study

Directory of Open Access Journals (Sweden)

Vivekanandan Ramkumar

2012-01-01

Full Text Available Aim: To evaluate the effect of water temperature on the marginal fit of bis-acrylic composite provisional crown during resin polymerization. Materials and Methods: Precisely machined 10 brass master dies were designed to simulate molar teeth. Five brass dies were selected and precisely machined to simulate all ceramic crown preparation. An acrylic jaw replica was made in which brass dies were arranged equidistant from each other. A custom-made metallic tray was fabricated on the acrylic jaw replica to make polyvinyl siloxane impression matrix. Bis-acrylic composite resin provisional crowns were made using polyvinyl siloxane impression matrix. Provisional crowns were polymerized at room temperature (Group I direct technique, on dental stone cast; Group I indirect technique crowns and at different water temperatures (Group II direct technique crowns. The vertical marginal gap between all the provisional crown margins and the finish line of brass dies was measured using a Research Stereomicroscope System. Results: The results were statistically analyzed using one-way analysis of variance (ANOVA test and Newman-Keul′s test. The results showed that crowns polymerized in 20°C and 30°C water had marginal gap approximately three times smaller than those polymerized in 30°C air, due to the reduced polymerization shrinkage. Conclusion: This study shows that crowns polymerized in 20°C and 30°C water had mean vertical marginal gap approximately three times smaller than those polymerized in 30°C air. It was approximately closer to that of crowns fabricated by indirect technique. Warmer water also supposedly hastens polymerization.

Effect of water temperature on the fit of provisional crown margins during polymerization: An in vitro study.

Science.gov (United States)

Ramkumar, Vivekanandan; Sangeetha, Arunachalam; Kumar, Vinaya

2012-08-01

To evaluate the effect of water temperature on the marginal fit of bis-acrylic composite provisional crown during resin polymerization. Precisely machined 10 brass master dies were designed to simulate molar teeth. Five brass dies were selected and precisely machined to simulate all ceramic crown preparation. An acrylic jaw replica was made in which brass dies were arranged equidistant from each other. A custom-made metallic tray was fabricated on the acrylic jaw replica to make polyvinyl siloxane impression matrix. Bis-acrylic composite resin provisional crowns were made using polyvinyl siloxane impression matrix. Provisional crowns were polymerized at room temperature (Group I direct technique, on dental stone cast; Group I indirect technique crowns) and at different water temperatures (Group II direct technique crowns). The vertical marginal gap between all the provisional crown margins and the finish line of brass dies was measured using a Research Stereomicroscope System. The results were statistically analyzed using one-way analysis of variance (ANOVA) test and Newman-Keul's test. The results showed that crowns polymerized in 20°C and 30°C water had marginal gap approximately three times smaller than those polymerized in 30°C air, due to the reduced polymerization shrinkage. This study shows that crowns polymerized in 20°C and 30°C water had mean vertical marginal gap approximately three times smaller than those polymerized in 30°C air. It was approximately closer to that of crowns fabricated by indirect technique. Warmer water also supposedly hastens polymerization.

Roostes Ruhrpoti tööstusmaastikel võrsub kultuur / Mari Peegel

Index Scriptorium Estoniae

Peegel, Mari, 1978-

2007-01-01

Arhitektide Fritz Schuppi ja Martin Kremeri projekteeritud endise söekaevanduse ruumides asuvast etenduskunstide ja koreograafia keskusest PACT Zollvereinist Essenis. Ka jutuajamisest keskuse kunstilise juhi, tantsija ja koreograafi Stefan Hilterhausiga

Surveillance of irradiation embrittlement of nuclear reactor pressure vessels

International Nuclear Information System (INIS)

Najzer, M.

1982-01-01

Surveillance of irradiation embrittlement of nuclear reactor pressure vessels is briefly discussed. The experimental techniques and computer programs available for this work at the J. Stefan Institute are described. (author)

Racism, empire and sociology

OpenAIRE

Smith, Andrew

2017-01-01

Reviews of Gurminder K Bhambra, Connected Sociologies; Peo Hansen and Stefan Jonsson, Eurafrica: The Untold History of European Integration and Colonialism; Wulf D. Hund, Alana Lentin (eds) Racism and Sociology

Zwischenberichterstattung nach Börsenrecht, DRS, IAS und US-GAAP

OpenAIRE

Alvarez von Zerboni di Sposetti, Manuel

2003-01-01

Zwischenberichterstattung nach Börsenrecht, DRS, IAS und US-GAAP / von Manuel Alvarez und Stefan Wotschofsky. - 2., neubearb. und erw. Aufl. - Berlin : Erich Schmidt, 2003. - XX, 219 S. [1. Aufl. 2000

Fabrication of MWCNT/NiO nanocomposite thin films for optically selective solar absorbers

CSIR Research Space (South Africa)

Roro, Kittessa T

2011-07-01

Full Text Available = ?T4, ? = 5.67 ? 10-8 W/m2K4 (1) (Stefan-Boltzmann law) 0.1 1 10 0.0 0.2 0.4 0.6 0.8 1.0 S pe ctral rad iatio n (arb . u nits ) Wave length (?m) 0.0 0.2 0.4 0.6 0.8 1.0 Id ea l s el ec tiv e ab so rb er Blackbody... T = 373 K Solar (AM 1.5) Reflectance Fundamentals: Optical Selectivity The power density ,P, of thermal radiation emitted by a black body of temperature T is P = ?T4, ? = 5.67 ? 10-8 W/m2K4 (1) (Stefan-Boltzmann law) At T = 80 ?C, from eq. (1...

Multiwall carbon nanotube/nickel oxide nanocompositecoatings: Sol-gel deposition and characterization

CSIR Research Space (South Africa)

Roro, Kittessa T

2011-09-01

Full Text Available The power density ,P, of thermal radiation emitted by a black body of temperature T is P = ?T4, ? = 5.67 ? 10-8 W/m2K4 (1) (Stefan-Boltzmann law) 0.1 1 10 0.0 0.2 0.4 0.6 0.8 1.0 S p ec tr al r ad ia ti o n ( ar b . u n it s... black body of temperature T is P = ?T4, ? = 5.67 ? 10-8 W/m2K4 (1) (Stefan-Boltzmann law) At T = 80 ?C, from eq. (1), P ~ 900 W/m2 ~ incident solar energy at the ground ? An optically selective surface is required Samples were fabricated in a simple...

Asymmetric acoustic transmission in multiple frequency bands

Energy Technology Data Exchange (ETDEWEB)

Sun, Hong-xiang, E-mail: jsdxshx@ujs.edu.cn [Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang 212013 (China); Laboratory of Modern Acoustics, Institute of Acoustics, Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093 (China); State Key Laboratory of Acoustics, Institute of Acoustics, Chinese Academy of Sciences, Beijing 100190 (China); Yuan, Shou-qi, E-mail: Shouqiy@ujs.edu.cn [Research Center of Fluid Machinery Engineering and Technology, Jiangsu University, Zhenjiang 212013 (China); Zhang, Shu-yi [Laboratory of Modern Acoustics, Institute of Acoustics, Collaborative Innovation Center of Advanced Microstructures, Nanjing University, Nanjing 210093 (China)

2015-11-23

We report both experimentally and numerically that the multi-band device of the asymmetric acoustic transmission is realized by placing two periodic gratings with different periods on both sides of two brass plates immersed in water. The asymmetric acoustic transmission can exist in four frequency bands below 1500 kHz, which arises from the interaction between various diffractions from the two gratings and Lamb modes in the brass plates immersed in water. The results indicate that the device has the advantages of multiple band, broader bandwidth, and simpler structure. Our finding should have great potential applications in ultrasonic devices.

Asymmetric acoustic transmission in multiple frequency bands

International Nuclear Information System (INIS)

Sun, Hong-xiang; Yuan, Shou-qi; Zhang, Shu-yi

2015-01-01

We report both experimentally and numerically that the multi-band device of the asymmetric acoustic transmission is realized by placing two periodic gratings with different periods on both sides of two brass plates immersed in water. The asymmetric acoustic transmission can exist in four frequency bands below 1500 kHz, which arises from the interaction between various diffractions from the two gratings and Lamb modes in the brass plates immersed in water. The results indicate that the device has the advantages of multiple band, broader bandwidth, and simpler structure. Our finding should have great potential applications in ultrasonic devices

Pro Forma Registration of Companies

DEFF Research Database (Denmark)

Werlauff, Erik

2010-01-01

The article analyses the view taken by Community law on companies' pro forma registration in another EU or EEA country. Community law recognises pro forma registration under company law, i.e. a brass plate is sufficient, whereas it does not recognise pro forma registration under tax law, i.......e. a brass plate is not sufficient. The article provides reasons for the differential treatment of the two contexts and clarifies the difference on the basis of the Hubbard criterion, in which it was ruled that the effectiveness of Community law cannot vary according to the various branches of national law....

Inimesed meie ümber / Anne-Ly Sova

Index Scriptorium Estoniae

Sova, Anne-Ly, 1976-

2007-01-01

Münchenis toimunud teatrifestivali "Spielart" mõnest etendusest: Stefan Kaegi ja Lola Ariase dokumentaallavastus "SOKO Sao Paulo", Tim Etchellsi ja Belgia trupi Victoria "That Night Follows Day", Alvis Hermanise "Väter"

"Vana hea aeg" baltisaksa mälestusteraamatus / Ahti Saares

Index Scriptorium Estoniae

Saares, Ahti

2000-01-01

Baltisakslastest memuariste iseloomustab romantilis-patriootiline suhtumine kodumaasse ja sellest lähtuv kultuuritoojalik, kõrgemat missiooni täitev hoiak. Võrdlus Stefan Zweigi, Sven Danelli ja Kaljo Villako mälestusteraamatutega

Bulgaaria maanteenomaadid Tallinna tänavatel. Teater / Andres Keil

Index Scriptorium Estoniae

Keil, Andres, 1974-

2008-01-01

Märtsis kaubaveoautol toimuvatest etendustest "Cargo Sofia-Tallinn". Esitavad bulgaaria treilerijuhid Ventzislav Borissov ja Nedjalko Nedjalkov. Teose autorid on Stefan Kaegi ja Jörg Karrenbauer. Lavastus on sissejuhatuseks suvisele teatrifestivalile Baltoscandal

Tallinna jõuab teater kaubaveoautos

Index Scriptorium Estoniae

2008-01-01

Märtsis kaubaveoautol toimuvatest etendustest "Cargo Sofia-Tallinn". Esitavad bulgaaria treilerijuhid Ventzislav Borissov ja Nedjalko Nedjalkov. Teose autorid on Stefan Kaegi ja Jörg Karrenbauer. Lavastus on sissejuhatuseks suvisele teatrifestivalile Baltoscandal

Hawking radiation, the Stefan-Boltzmann law, and unitarization

OpenAIRE

Giddings, Steven B.

2015-01-01

Where does Hawking radiation originate? A common picture is that it arises from excitations very near or at the horizon, and this viewpoint has supported the “firewall” argument and arguments for a key role for the UV-dependent entanglement entropy in describing the quantum mechanics of black holes. However, closer investigation of both the total emission rate and the stress tensor of Hawking radiation supports the statement that its source is a near-horizon quantum region, or “atmosphere,” w...

BNCT Project at the J. Stefan TRIGA Reactor

International Nuclear Information System (INIS)

Glumac, B.; Maucec, M.; Jeraj, R.; Kodeli, I.

1994-01-01

Contribution presents condensed description of the BNCT method, as one of the most promising methods of cancer radio therapy in the future. Certain planned research activities considering realization of BNCT project in Slovenia are also shown. Modelling of irradiation facility as well as mathematical simulation of neutron and photon transport are completely performed by Monte Carlo computer simulation, and for that reason some basic characteristics and capabilities of MCNP4A computer code are also presented. Finally, some results obtained up to this time are presented. (author)

US National Geothermal Data System: Web feature services and system operations

Science.gov (United States)

Richard, Stephen; Clark, Ryan; Allison, M. Lee; Anderson, Arlene

2013-04-01

The US National Geothermal Data System is being developed with support from the US Department of Energy to reduce risk in geothermal energy development by providing online access to the body of geothermal data available in the US. The system is being implemented using Open Geospatial Consortium web services for catalog search (CSW), map browsing (WMS), and data access (WFS). The catalog now includes 2427 registered resources, mostly individual documents accessible via URL. 173 WMS and WFS services are registered, hosted by 4 NGDS system nodes, as well as 6 other state geological surveys. Simple feature schema for interchange formats have been developed by an informal community process in which draft content models are developed based on the information actually available in most data provider's internal datasets. A template pattern is used for the content models so that commonly used content items have the same name and data type across models. Models are documented in Excel workbooks and posted for community review with a deadline for comment; at the end of the comment period a technical working group reviews and discusses comments and votes on adoption. When adopted, an XML schema is implemented for the content model. Our approach has been to keep the focus of each interchange schema narrow, such that simple-feature (flat file) XML schema are sufficient to implement the content model. Keeping individual interchange formats simple, and allowing flexibility to introduce new content models as needed have both assisted in adoption of the service architecture. One problem that remains to be solved is that off-the-shelf server packages (GeoServer, ArcGIS server) do not permit configuration of a normative schema location to be bound with XML namespaces in instance documents. Such configuration is possible with GeoServer using a more complex deployment process. XML interchange format schema versions are indicated by the namespace URI; because of the schema location

Pramana – Journal of Physics | Indian Academy of Sciences

Indian Academy of Sciences (India)

Author Affiliations. Andrew Das Arulsamy1 2. School of Physics, The University of Sydney, Sydney, New South Wales 2006, Australia; Jožef Stefan Institute, Jamova Cesta 39, SI-1000 Ljubljana, Slovenia ...

Heating of leads casks. An analytical solution to the heat equation made up of a series of Laguerre functions; Echauffement des chateaux de plomb. Une solution analytique a l'equation de la chaleur constituee par une serie de fonctions de Laguerre

Energy Technology Data Exchange (ETDEWEB)

Formery, Ph; Gilles, A [Commissariat a l' Energie Atomique, Dir. des Productions, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1968-07-01

The packing used for the transport of highly radioactive materials such as in-pile irradiated rods; have to comply to fairly strict safety standards. They should in particular resist to fire without the radioactive protection being seriously affected. The heating of a transport cask placed in a fire has been calculated by normal automatic computation methods assuming that only thermal radiation is responsible for the heating and that this obeys STEFAN'S law. Simultaneously, a purely analytical treatment has been attempted as follows. The existence of a simple solution, of the Laguerre function type, to the heat equation has been demonstrated. By superposing an infinite number of simple solutions, it is possible to produce a fairly general solution, depending on parameters, which satisfies the initial state and the limiting conditions. The parameters can be adjusted so that the temperature and the flux produced on the shell by this solution satisfy approximately STEFAN'S relationship. (authors) [French] Les emballages qui servent au transport de produits fortement radioactifs, tels que des barreaux irradies dans les piles, doivent satisfaire a des normes de securite assez strictes. Ils doivent, en particulier, resister au feu sans que la protection contre le rayonnement soit sensiblement entamee. L'echauffement, par seul rayonnement thermique suppose obeir a la loi de STEFAN, d'un chateau de transport plonge dans un feu a ete calcule par les methodes habituelles du calcul automatique. Parallelement a ete tentee l'approche purement analytique que voici: Une solution simple, du type fonction de LAGUERRE, a l'equation de la chaleur est mise en evidence. La superposition, en nombre infini, de solutions simples, permet de fabriquer une solution assez generale dependant de parametres, satisfaisant a l'etat initial et aux conditions aux limites. Les parametres peuvent etre ajustes de facon que la temperature et le flux engendres sur la coque par cette solution

Samaja bolshaja stroiploshtshadka v Estonii / Konstantin Morenko

Index Scriptorium Estoniae

Morenko, Konstantin

2004-01-01

Tallinna linnavalitsus korraldas ümarlaua linna rannaalade hetkeseisu ja arenguvõimaluste hindamiseks, mille töös osalesid ka Euroopa tuntud linnaplaneerimise konsultandid. Arvamust avaldavad Peep Aaviksoo, Lutz Schleich, Giorgio Risicaris ja Stefan Boltz

Evolution of the feedback from experience on degradations of French nuclear power plants condensers and foreseen solutions

Energy Technology Data Exchange (ETDEWEB)

Mayos, M.; Chanel, F.; Copin, E.; Carlier, L. [EDF/DIN/CEIDRE, Saint-Denis (France); Coquio, N.; Garbay, E. [EDF/DIN/CEIDRE, Avoine (France); Bastian, C. [EDF/DPN/UNIE, Saint-Denis (France)

2011-07-01

The materials constituting the condenser tubes of French nuclear power plants display a great diversity and are subject to different degradations, known from the operational feedback from experience. Copper alloys (mainly brass), which were bound to disappear in renovated condensers, are still significantly present, due to their unique bacteriostatic ability. Brass tubes lifetime is still governed in general by steady abrasion, as evaluated by eddy current nondestructive testing. However, an atypical NDE (non-destructive evaluation) behavior has led to spot a new damage: localized under-deposit pitting corrosion on the raw water side, caused by the particular quality of water chemistry and heavy scaling of the tube surface. This damage is likely to overcome steady abrasion for tube life prediction. Prevention includes a tighter look at NDE indications and improved descaling solutions (chemical or mechanical). Other specific damages have been reported from operation feedback: the main one was accidental stress corrosion cracking, which has occurred on some recently renovated brass condenser tube bundles. Thanks to a metallurgical and mechanical study, its cause was found in the manufacturing process. This experience has resulted in tightened specifications for brass tubes manufacturing. Stainless steel and titanium still appear more damage-resistant and represent a safe solution when no microorganism issue is present. The degradation feedback, confirmed by NDE inspections, is very low in French power plants. However, titanium hydriding still represents an issue when cathodic protection is present. Furthermore, some other damages have been reported on titanium, like isolated steam erosion. Vibration fatigue damage has been observed on stainless steel tubes, but it is more in relationship with the condenser design than with the material itself. (authors)

Improvement of reliability of heater and condenser

International Nuclear Information System (INIS)

Yamagishi, Hiroki

1988-01-01

Recently, the diversification of the operation modes of power plants has advanced as well as daily start and stop and weekly start and stop operations, as the result, the needs for the reliability improvement of various heat exchangers around steam turbines heighten. In newly constructed plants, the design to meet this demand is carried out, but also in existing platns, the application of the latest technology is investigated. As for the reliability of condensers, aluminum brass cooling tubes have been used by doing the optimal maintenance and taking the measures against deposit attack. In the case of requiring high reliability, the examples of adopting titanium cooling tubes increased. The technology of titanium tube condensers, completely assembled condensers, the replacement of existing brass tubes with titanium tubes and so on are discussed. In the case of feed heaters, the deterioration phenomena due to the lapse of long years, such as the attack of steel tube inlet, the drain attack on the external surfaces of steel tubes, the ammonia attack of aluminum brass tubes and the adhesion of scale to heaters, are explained, and the countermeasures are shown. (Kako, I.)

SIMS depth profiling of rubber-tyre cord bonding layers prepared using 64Zn depleted ZnO

International Nuclear Information System (INIS)

Fulton, W.S.; Sykes, D.E.; Smith, G.C.

2006-01-01

Zinc oxide and copper/zinc sulphide layers are formed during vulcanisation and moulding of rubber to brass-coated steel tyre reinforcing cords. Previous studies have described how zinc diffuses through the rubber-brass interface to form zinc sulphide, and combines with oxygen to create zinc oxide during dezincification. The zinc is usually assumed to originate in the brass of the tyre cord, however, zinc oxide is also present in the rubber formulation. We reveal how zinc from these sources is distributed within the interfacial bonding layers, before and after heat and humidity ageing. Zinc oxide produced using 64 Zn-isotope depleted zinc was mixed in the rubber formulation in place of the natural ZnO and the zinc isotope ratios within the interfacial layers were followed by secondary ion mass spectroscopy (SIMS) depth profiling. Variations in the relative ratios of the zinc isotopes during depth profiling were measured for unaged, heat-aged and humidity-aged wire samples and in each case a relatively large proportion of the zinc incorporated into the interfacial layer as zinc sulphide was shown to have originated from ZnO in the rubber compound

German Environmental Information Network - GEIN; Grundlagen der Umweltpolitik, Umweltstrategien. Umweltinformationsnetz Deutschland - GEIN

Energy Technology Data Exchange (ETDEWEB)

Bandholtz, T.

2001-05-01

The German Environmental Information Network (GEIN) consolidates a wide range of information currently distributed across many different Web sites run by public institutions in Germany, such as environmental authorities, agencies and ministries at the federal and Land (state) levels. The 'Portal to German Environmental Information' offers an easy-to-use access for any internet user by one single address, supporting the choice of search conditions through thesaurus-terms, geographic names, and an interactive environmental calendar. Behind that a unique XML namespace giving a solid semantic ground to bhe communication between the information providers and their 'broker'. GEIN supports automatic, thesaurus-based indexing, and a fast broadcasting mechanism (XML via HTTP) for queries that cannot be processed using the index only. Since GEIN has been inaugurated on June 9th, 2000, it has found a broad acceptance in the general public as well as with the professionals. (orig.) [German] Das Umweltinformationsnetz Deutschland (GEIN) vereint ein weites Spektrum an Umweltinformation von oeffentlichen Einrichtungen und Behoerden im Internet, die zuvor allein ueber zahlreiche individuelle Websites erreichbar war. Das 'Portal der Deutschen Umweltinformation' bietet jedem Internetbenutzer zu diesen Informationen einen umkomplizierten Zugang ueber eine einzige Adresse. Darueber hinaus erhaelt der Benutzer vielfaeltige Unterstuetzung bei der Wahl geeigneter Suchbedingungen durch Fach-Vokabular, geografische Namen und einen interaktiven Umweltkalender. Dahinter steht ein eigener XML-'Namensraum' (namespace), der die Kommunikation zwischen den einzelnen Informationsanbietern und ihrem gemeinsamen 'Broker' auf eine stabile semantische Grundlage stellt. GEIN verfuegt ueber ein thesaurus-basiertes Indizierungsverfahren, sowie ueber einen schnellen Verteilungs-mechanismus fuer Anfragen, die nicht aus dem Index beantwortet werden koennen

Study the effect of nitrogen flow rate on tribological properties of tantalum nitride based coatings

Science.gov (United States)

Chauhan, Dharmesh B.; Chauhan, Kamlesh V.; Sonera, Akshay L.; Makwana, Nishant S.; Dave, Divyeshkumar P.; Rawal, Sushant K.

2018-05-01

Tantalum Nitride (TaN) based coatings are well-known for their high temperature stability and chemical inertness. We have studied the effect of nitrogen flow rate variation on the structural and tribological properties of TaN based coating deposited by RF magnetron sputtering process. The nitrogen flow rate was varied from 5 to 30 sccm. X-ray diffractometer (XRD) and Atomic Force Microscopy (AFM) were used to determine structure and surface topography of coating. Pin on disc tribometer was used to determine tribological properties of coating. TaN coated brass and mild steel substrates shows higher wear resistance compared to uncoated substrates of brass and mild steel.

Börs nutab taga Eesti Energia loobumist / Jaana Pikalev ; kommenteerinud Jürgen Ligi, Sandor Liive

Index Scriptorium Estoniae

Pikalev, Jaana

2010-01-01

SEB privaatpanganduse osakonna strateeg Peeter Koppel, LHV Panga analüütik Sten Pisang, investor Stefan Andresson avaldavad arvamust seoses otsusega Eesti Energia veel mitte börsile viia. Majandus- ja kommunikatsiooniminister Juhan Partsi arvamus

Naiste maailm / Katrin Rajasaare

Index Scriptorium Estoniae

Rajasaare, Katrin

2001-01-01

Pimedate Ööde V filmifestivalil näidatavast kolmest mängufilmist : Stefan Jägeri "Sünnipäev", Saksamaa 2001; Catherine Corsini "Proov", Prantsusmaa 2001; Rakhsan Bani Etemad "Linna kesta all", Iraan 2001

Raamat ainsana maailmas Tallinnas säilinud 16. sajandi käsikirjast / Vello Lumiste

Index Scriptorium Estoniae

Lumiste, Vello

2008-01-01

Rets. rmt.: Die Arithmetik-Vorlesung des Georg Joachim Rheticus Wittenberg 1536 : eine kommentierte Edition der Handschrift X-278 (8) der Estnischen Akademischen Bibliothek / herausgegeben von Stefan Deschauer. Augsburg, 2003. Lisa: Valitud osi käsikirjast

The happy Bulgarian family

CERN Multimedia

2000-01-01

From left to right, last row to first row: Ilka Antcheva, Georgi Antchev, Dimitri Borilkov, Ivana Hristova, Petiu Petev, Peicho Petkov, Borislav Pavlov, Peter Hristov, Mihail Tchijov, Stefan Piperov, Ekaterina Ivanova, Dimitar Kolev, Roumen Tzenov.

Monitoring White-backed Vultures Gyps africanus in the North West ...

African Journals Online (AJOL)

Campbell Murn

Stellaland), South Africa. Dirk, Karen and Stefan van Stuyvenberg. Stellaland Raptor Project. e-mail: stuyvies@telkomsa.net. Introduction. We became involved with the ringing of birds in 2002 and started to ring raptors actively since 2003.

57. Baltisches Historikertreffen : vom 5. bis 6. Juni 2004 in Göttingen

Index Scriptorium Estoniae

2004-01-01

57. balti ajaloolaste kohtumisel 5.-6. juunini 2004 esinesid ettekannetega Erki Tammiksaar, Tiit Rosenberg, Olaf Mertelsmann, Klaus Neitmann, Matthias Thumsen, Ilgvars Misans, Henrik Bolte, Thomas Brück, Juhan Kreem, Dieter Heckmann, Stefan Hartmann. Ettekannete kokkuvõtted

Hollandi paviljon Hannoveri maailmanäitusel EXPO 2000 : Uus Loodus = Dutch Pavilion at EXPO 2000 in Hannover : New Nature / Winy Maas, Jacob van Rijs, Nathalie de Vries

Index Scriptorium Estoniae

Maas, Winy

2000-01-01

Hollandi paviljon - näide looduse ja tehnoloogia segunemisest. Projekteerija: MVRDV. Arhitektid Winy Maas, Jacob van Rijs, Nathalie de Vries; kaasa töötasid Stefan Witteman, Jaap van Dijk, Chrisoph Schindler, Kristina Adsersen, Rüdiger Kreiselmayer

Solving one-dimensional phase change problems with moving grid method and mesh free radial basis functions

International Nuclear Information System (INIS)

Vrankar, L.; Turk, G.; Runovc, F.; Kansa, E.J.

2006-01-01

Many heat-transfer problems involve a change of phase of material due to solidification or melting. Applications include: the safety studies of nuclear reactors (molten core concrete interaction), the drilling of high ice-content soil, the storage of thermal energy, etc. These problems are often called Stefan's or moving boundary value problems. Mathematically, the interface motion is expressed implicitly in an equation for the conservation of thermal energy at the interface (Stefan's conditions). This introduces a non-linear character to the system which treats each problem somewhat uniquely. The exact solution of phase change problems is limited exclusively to the cases in which e.g. the heat transfer regions are infinite or semi-infinite one dimensional-space. Therefore, solution is obtained either by approximate analytical solution or by numerical methods. Finite-difference methods and finite-element techniques have been used extensively for numerical solution of moving boundary problems. Recently, the numerical methods have focused on the idea of using a mesh-free methodology for the numerical solution of partial differential equations based on radial basis functions. In our case we will study solid-solid transformation. The numerical solutions will be compared with analytical solutions. Actually, in our work we will examine usefulness of radial basis functions (especially multiquadric-MQ) for one-dimensional Stefan's problems. The position of the moving boundary will be simulated by moving grid method. The resultant system of RBF-PDE will be solved by affine space decomposition. (author)

Thermal phenomenae in nuclear fuel rods

International Nuclear Information System (INIS)

Baigorria, Carlos.

1983-12-01

Thermal phenomenae occurring in a nuclear fuel rod under irradiation are studied. The most important parameters of either steady or transient thermal states are determined. The validity of applying the Fourier's approximation equations to these problems is also studied. A computer program TRANS is developed in order to study the transient cases. This program solves a system of coupled, non-linear partial differential equations, of parabolic type, in cylindrical coordinates with various boundary conditions. The benchmarking of the TRANS program is done by comparing its predictions with the analytical solution of some simplified transient cases. Complex transient cases such as those corresponding to characteristic reactor accidents are studied, in particular for typical pressurized heavy water reactor (PHWR) fuel rods, such as those of Atucha I. The Stefan problem emerging in the case of melting of the fuel element is solved. Qualitative differences between the classical Stefan problem, without inner sources, and that one, which includes sources are discussed. The MSA program, for solving the Stefan problem with inner sources is presented; and furthermore, it serves to predict thermal evolution, when the fuel element melts. Finally a model for fuel phase change under irradiation is developed. The model is based on the dimensional invariants of the percolation theory when applied to the connectivity of liquid spires nucleated around each fission fragment track. Suggestions for future research into the subject are also presented. (autor) [es

Das Minderheitenrecht europäischer Staaten. Teil 2 / Carmen Schmidt

Index Scriptorium Estoniae

Schmidt, Carmen, 1956-

1996-01-01

Raamatuarvustus: Das Minderheitenrecht europäischer Staaten. Teil 2 / herausgegeben von Jochen Abr. Frowein, Rainer Hofmann, Stefan Oeter ; Max-Planck-Institut für ausländisches öffentliches Recht und Völkerrecht. Berlin [etc.] : Springer-Verlag, 1994

Kalamaja jalakäijate silla eskiislahendus = A draft project for a pedestrian bridge in Kalamaja / Irina Raud

Index Scriptorium Estoniae

Raud, Irina, 1945-

2008-01-01

Tallinna Tehnikakõrgkooli Arhitektuuri õppetooli õpitoa "Intelligentsed konstruktsioonid" raames toimunud professor Irina Raua ja professor Stefan Polonyi (Saksamaa) näidisloengu ajal arhitekti ja inseneri koostööna valminud Tallinna Kalamajja kavandatava jalakäijate silla eskiislahendusest

Tartu ülikool nimetas viis uut audoktorit

Index Scriptorium Estoniae

2016-01-01

Rahvusülikooli 97. aastapäeval pälvisid audoktori nimetuse prof-d Stefan Schreiner (usuteadus), Eberhard Klaus Wolfgang Winkler (keeleteadus), Christian Tomuschat (õigusteadus), Kauko K. Mäkinen (hambaarstiteadus), Markku Leskelä (loodus- ja täppisteadused)

Tallinna uue linnamööbli kujunduse teevad itaallased / Askur Alas

Index Scriptorium Estoniae

Alas, Askur, 1973-

2005-01-01

Tallinna linnamööbli konkursi teise vooru võitjaks tunnistati Itaalia disainerite Irina Maria Suteu ja Stefan Davidovici töö "Bow". Ühtse kujunduse saavad pingid, prügikastid, ootepaviljonid ja kioskid. Eestlased finaalis ei osalenud

A non-destructive synchrotron X-ray study of the metallurgy and manufacturing processes of Eastern and Western astrolabes in the Adler Planetarium collection

Science.gov (United States)

Newbury, Brian Dale

The astrolabe collection of the Adler Planetarium and History of Astronomy Museum, Chicago, IL, was examined using non-destructive synchrotron based high-energy X-ray techniques including diffraction, fluorescence, and radiography to determine the metallurgy, microstructure, and metal forming processes used in astrolabe construction. All high-energy X-ray measurements were performed at the Advanced Photon Source (APS) synchrotron of Argonne National Laboratory, Argonne, IL. Astrolabes from the collection were selected to represent all major astrolabe production centers possible and time periods. It was found that all European astrolabes were manufactured of traditional cementation brass by hand worked metal forming processes consistent with technology in the literature. Of the Islamic astrolabes examined, all seven from Lahore in current-day Pakistan exhibited advanced brass alloys not typical of alloys discussed in the literature. It was found that these alloys were selected for their specific hot working properties, allowing the Lahore metalworkers to more efficiently make brass sheet from which to make astrolabe components. In addition, the alloy required a fundamental change in the brass foundry process, indicating advanced Zn metal production techniques. It was found that analysis by high energy X-rays from the APS was essential to produce data on the chemistry and microstructure from the interior of the astrolabe components in a non-destructive manner. Many astrolabe components had undergone surface dezincification due to heavy annealing during manufacturing, causing the Zn composition measured by the surface sensitive fluorescence technique to be lower than the true bulk alloy Zn composition. This would have been impossible to quantify non-destructively without the high-energy diffraction capability of the APS. The results of this study have proven the effectiveness of the synchrotron as a viable non-destructive analysis technique for examining cultural

Distribution of Cr atoms in the surface zone of Fe-rich Fe–Cr alloys quenched into various media: Mössbauer spectroscopic study

International Nuclear Information System (INIS)

Dubiel, Stanisław M.; Cieślak, Jakub; Żukrowski, Jan

2015-01-01

Graphical abstract: Chromium depletion, Δx = x_k − x, in Fe_1_0_0_−_xCr_x (x = 2.2, 3.9, 6.4, 8.5, 10.25, 10.75, 14.9, 15.15) alloys quenched into LN (left panel) and those quenched onto brass (right panel) as found from CEMS (pre surface zone) and TRANS (bulk) Mössbauer spectra (x_k – Cr content in the pre surface or bulk as estimated from the average hyperfine field found for the quenched samples). - Highlights: • Effect of quenching media on Cr atom distribution in Fe–Cr alloys was determined. • Significant differences between bulk and pre surface zone were revealed. • Quenching into water and LH resulted in surface oxidation of samples. • Samples quenched onto a block of brass were not oxidized. - Abstract: Effect of a quenching medium (water, liquid nitrogen and block of brass) on a distribution of Cr atoms in the surface zone of Fe_1_0_0_−_xCr_x (x ≤ 19) alloys was studied with the Mössbauer spectroscopy. The distribution of Cr atoms was expressed in terms of the Cowley–Warren short-range order (SRO) parameters: 〈α_1〉 for the first neighbor-shell, 〈α_2〉 for the second neighbor-shell and 〈α_1_2〉 for both neighbor-shells. It was revealed that none of the quenching media resulted in a random distribution of atoms, yet the degree of randomness was the highest for the samples quenched onto the block of brass. The quenching into water and liquid nitrogen caused a partial oxidation of samples’ surface accompanied by a chromium depletion of the bulk. Quantitative analysis of various phases in the studied samples both in their bulk as well as in pre surface zones was carried out.

Sur?Surva - the Forgotten God [In Bulgarian

Directory of Open Access Journals (Sweden)

G. Simeonova

2014-12-01

Full Text Available Тhis paper deals with the neglected god – Sur/Surva. The author considers in full detail this problem, finding an evidence for the statements proposed by a new perusal of Stefan Verkovich’s Veda Slovena.

[Herzog...] / Jacek Wijaczka

Index Scriptorium Estoniae

Wijaczka, Jacek

2003-01-01

Rets. rmt.: Herzog Albrecht von Preussen und Livland (1540-1551). Regesten aus dem Herzoglichen Briefarchiv und den Ostpreussischen Folianteen. Köln-Weimar-Wien : Stefan Hartmann Böhlau-Verlag, 2002 (Veröffentlichungen aus dem Archiven Preussischer Kulturbesitz, Bd. 54)

Danish sponsors, English lead, Vikings, and a new roof for the church of Sainte-Geneviève in Paris

DEFF Research Database (Denmark)

Roesdahl, Else

2010-01-01

Dansk-franske forbindelse i 2. halvdel af 1100-årene, eksemplificeres ved forsøg fra abbed Stefan fra St. Geneviève i Paris på sponsorat til blytag til hans kirke fra det danske toparistokrati....

HIV/AIDS: A Nontraditional Security Threat for AFRICOM

National Research Council Canada - National Science Library

Letcher, Kenneth W

2008-01-01

.... Africa Command must navigate. The study will draw on research of the HIV/AIDS epidemic and its effect on the effectiveness of the militaries of southern Africa, leaning heavily on the research of Stefan Elbe and a small cadre...

Indian Academy of Sciences Conference Series | Indian Academy of ...

Indian Academy of Sciences (India)

Author Affiliations. BOSILJKA TADIĆ1 MIROSLAV ANDJELKOVIĆ2 NEELIMA GUPTE3. Department of Theoretical Physics, Jožef Stefan Institute, Ljubljana, Slovenia; Institute for Nuclear Sciences, Vinča, Belgrade, Serbia; Indian Institute of Technology Madras, Chennai, India ...

Behavior of Fatigue Crack Tip Opening in Air and Corrosive Atmosphere

Science.gov (United States)

Hayashi, Morihito; Toeda, Kazunori

In the study, a formula for predicting fatigue crack tip opening displacement is deduced firstly. And then, due to comparing actual crack growth rate with the deduced formula, the crack tip configuration factor is defined to figure out the crack tip opening configuration that is useful to clarify the behavior of fatigue crack tip formation apparently. Applying the concept, the crack growth of 7/3 brass and 6/4 brass is predicted from the formula, by replacing material properties such as plastic flow resistance, Young modulus, the Poisson ratio, and fatigue toughness, and fatigue test conditions such as the stress intensity factor range, the load ratio, and cycle frequency. Furthermore, the theoretically expected results are verified with the fatigue tests which were carried out on CT specimens under different load conditions of load ratio, cycle frequency, and cyclic peak load, in different environments of air or corrosive ammonia atmosphere, for various brasses. And by comparing and discussing the calculated crack growth rate with attained experimental results, the apparent configuration factor at the crack tip is determined. And through the attained factor which changes along with crack growth, the behaviors of fatigue crack tip formation under different test conditions have been found out.

Ice-­Ocean Thermodynamic Interface and Small-­Scale Issues

Energy Technology Data Exchange (ETDEWEB)

Turner, Adrian K. [Los Alamos National Laboratory

2012-07-02

This presentation discusses: (1) Stefan condition, (2) lower boundary condition of mushy layers, (3) salt flux to ocean from gravity drainage, (4) distribution of salt flux in the ocean, (5) under ice melt ponds and false bottoms, and (6) basal ablation.

Tulevik Electroluxi disainivõistluselt / Enn Heinsoo

Index Scriptorium Estoniae

Heinsoo, Enn

2009-01-01

Võistluse "Design Lab" tööde näitus tuleviku kodumasinatest Arhitektuuri- ja Disainigaleriis 21. märtsini. 2007. aastal võitis konkursi ungarlase Levente Szabo ökopesumasin E-wash, 2008. aastal austerlase Stefan Buchbergeri moodulkülmik Flatshare

South African Journal of Chemistry - Vol 55 (2002)

African Journals Online (AJOL)

On-line Determination of Hydrochloric Acid in Process Effluent Streams by Potentiometric Sequential Injection Acid-Base Titration · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. JF Van Staden, MG Mashamba, RI Stefan ...

Beam heating of target foils

International Nuclear Information System (INIS)

Corwin, W.C.

1975-01-01

A target rotator, built to reduce the effects of beam spot heating, is fully adjustable, holds three targets, is chamber independent, and takes up limited space. The expected temperature rise in the target is calculated from the Stefan--Boltzmann law

Söö, joo, vaata filme / Jaak Lõhmus

Index Scriptorium Estoniae

Lõhmus, Jaak

2007-01-01

57. "Berlinale" esimese poole filmidest: Olivier Dahani "Elu on roos" ("La Mome") Edith Piafist, Robert De Niro "Hea karjane" ("The Good Shepherd"), Clint Eastwoodi "Kirjad Iwo Jimalt" ("Letters from Iwo Jima"), Wang Quanani "Tuya abielu", Stefan Ruzowitsky "Võltsijad" ("Die Fälscher")

Un miniatore nella bottega degli Astrapas? Alcune osservazioni attorno alle immagini del Tolomeo Marciano gr. Z. 516 (904)

Czech Academy of Sciences Publication Activity Database

Lovino, Francesco

-, č. 22 (2016), s. 384-398 ISSN 1330-7274 Institutional support: RVO:68378033 Keywords : Astrapas * Marc. gr. Z. 516 (904) * Thessaloniki * Claudius Ptolemy * Gračanica * Paleologan Illumination * Stefan Uroš II Milutin * Aristotelianism Subject RIV: AL - Art, Architecture, Cultural Heritage

Estudio de corrosión galvánica en pares latón/acero inoxidable y latón/fundición de hierro

Directory of Open Access Journals (Sweden)

Ohanian, M.

2011-08-01

Full Text Available Corrosion attack in heat exchanger systems is a topic of main interest for the maintenance in each industrial plant. These are multigalvanic systems with particular geometric and fluidodynamic complexity. Corrosive damages include zinc selective dealeation in copper alloys. In order to explain zinc dealeation attack, this paper deals with laboratory scale testing, characterization and interactions between two copper and zinc alloys (Yellow brass –UNS C268– and Admiralty brass –UNS C443– compared to AISI 316 stainless steel and cast iron. The tests were performed at 20 °C in 1.5 % NaCl and 1.5 % Na₂SO₄ solutions, pH 8 and each material was characterized by potentiodynamic sweeps. The couples are analyzed by studying transient galvanic currents. We conclude about the cause of the analyzed pathology, brass protection potential ranges and its coupling compatibility with other metals.

El ataque por corrosión en los sistemas intercambiadores de calor constituye un problema para el mantenimiento de cualquier planta industrial. Se trata de sistemas multigalvánicos con particular complejidad geométrica y fluidodinámica. Las patologías corrosivas incluyen el fenómeno de dealeación selectiva de cinc en las aleaciones de cobre. A fin de explicar un caso particular de ataque por decinficación (deterioro en placa de intercambiador de calor de tubos de inoxidable, el presente trabajo aborda en ensayos a escala de laboratorio, la caracterización e interacciones entre dos aleaciones de cobre y cinc, (Yellow brass –UNS C268– y Admiralty brass –UNS C443–, respecto a acero inoxidable AISI 316 y fundición gris de hierro. Los ensayos se realizan a 20 °C en disoluciones de NaCl 1,5 % y Na₂SO₄ 1,5 % y pH 8. Se caracterizan electroquímicamente las aleaciones y materiales involucrados mediante barridos potenciodinámicos. Los pares galvánicos formados se analizan mediante el

Some improvements to the solution of Stefan-like problems

International Nuclear Information System (INIS)

El-Genk, M.S.; Cronenberg, W.

1979-01-01

Two approximate analytical methods are developed for solving one-dimensional transient heat-conduction problems with phase transformation, where the growth rate of a frozen crust (layer) on a cold wall is sought. Both provide an accurate prediction of the instantaneous position of the moving boundary as applied to one dimensional melting and freezing problems. (author)

Köök / Eve Arpo, Bibi Steinberg

Index Scriptorium Estoniae

Arpo, Eve

2009-01-01

Kaasaegsed köögid, köögitehnika. Nõuandeid köögi planeerimiseks. Peter Distoli disainitud suhkrust köök. Rahvusvahelisel disainivõistlusel Electro Design Lab 2008 eksponeeritud kodumasinad. Esikoha võitis Stefan Buchbergeri disainitud moodulitest koosnev külmik

Tallinna börsi uus lemmik / Armin Karu ; interv. Jaanika Merilo

Index Scriptorium Estoniae

Karu, Armin, 1965-

2006-01-01

Olympic Entertainment Group'i juht tutvustab ettevõtte börsile viimist, laienemisplaane Kesk- ja Ida-Euroopasse, olukorda kasiinoturul. Graafik: Olympic Entertainment Groupi aktsia kurss 23.-25. okt. 2006. Kommenteerivad Stefan Andersson, Kristjan Lepik, Kristjan Hänni, Tõnno Vähk, Peeter Koppel

IPDO-2007: Inverse Problems, Design and Optimization Symposium

Science.gov (United States)

2007-08-01

Grebenniko v J. Luna Tomas Perez Manuel Enriquez 025 Alexande r Grebenniko v 026 Tsung- Chien Chen Shou- Jen Hsu Pan-Chio Tuan 028...Dulikravich 086 Helmut Sobieczky Monika Hannemann 087 Anssi Lehikoinen Arto Voutilainen Jari Kaipio Stefan Finsterle Mike Kowalsky 088

Authorship Correction: Sampling Key Populations for HIV Surveillance: Results From Eight Cross-Sectional Studies Using Respondent-Driven Sampling and Venue-Based Snowball Sampling.

Science.gov (United States)

Rao, Amrita; Stahlman, Shauna; Hargreaves, James; Weir, Sharon; Edwards, Jessie; Rice, Brian; Kochelani, Duncan; Mavimbela, Mpumelelo; Baral, Stefan

2018-01-15

[This corrects the article DOI: 10.2196/publichealth.8116.]. ©Amrita Rao, Shauna Stahlman, James Hargreaves, Sharon Weir, Jessie Edwards, Brian Rice, Duncan Kochelani, Mpumelelo Mavimbela, Stefan Baral. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 15.01.2018.

Keemia- ja füüsikapreemiate märksõna on valgus / Arko Olesk

Index Scriptorium Estoniae

Olesk, Arko, 1981-

2014-01-01

Nobeli keemiapreemia pälvisid sakslane Stefan Hell ning ameeriklased Eric Betzig ja William Moerner, kes leidsid viisi, kuidas uurida valgusmikroskoobiga eluslooduse pisimaid komponente. Füüsikapreemia pälvisid Jaapani teadlased Isamu Akasaki, Hiroshi Amano ja Shuji Nakamura sinise valgusdioodi leiutamise eest

Les dimensions d’une ombre: résonances intermédiales et collaborations artistiques entre femmes

Directory of Open Access Journals (Sweden)

Maryse Larivière

2014-04-01

Full Text Available Au sujet de l’ouvrage d’Andrea Oberhuber, Corps de papier : résonances[avec des accompagnements de Catherine Mavrikakis, Nicole Brossard et Verena Stefan] (Québec, QC, Nota Bene, 2012, 237 p. ISBN: 978-2-89518-442-3.

ALICE TPC gas system is the first of the LHC experiments to be put on line

CERN Document Server

Maximilien Brice

2006-01-01

Picture 01 : the Physics Department's DT1 gas systems team in their laboratory. Picture 02 : Chilo Garabatos (ALICE) and Stefan Haider (PH-DT1-GS) in front of the gas system for the ALICE TPC which has just been put on line.

Zum Stand und den Perspektiven der allgemeinsprachlichen ...

African Journals Online (AJOL)

Mev. R.B. Ruthven

so dass man nicht weiß, wie die Aktualität der gegenwärtigen slowenischen ...... zu wa23 in Abb. 1 gehören; Abkürzungen: A. = ABSTRAKTE; H = HIERAR-. CHISCHE ...... Ulrich, Stefan Evert, Egbert Lehmann und Christian Rohrer (Hrsg.).

Reactor core design calculations and fuel management in PWR; Izracun projekta sredice in upravljanja z forivom tlacnovodnega reaktorja

Energy Technology Data Exchange (ETDEWEB)

Ravnik, M [Institut Jozef Stefan, Ljubljana (Yugoslavia)

1987-07-01

Computer programs and methods developed at J. Stefan Institute for nuclear core design of Krsko NPP are treated. development, scope, verification and organisation of core design procedure are presented. The core design procedure is applicable to any NPP of PWR type. (author)

[(123)I]FP-CIT ENC-DAT normal database

DEFF Research Database (Denmark)

Tossici-Bolt, Livia; Dickson, John C; Sera, Terez

2017-01-01

quantifications methods, BRASS and Southampton, and explores the performance of the striatal phantom calibration in their harmonisation. RESULTS: BRASS and Southampton databases comprising 123 ENC-DAT subjects, from gamma cameras with parallel collimators, were reconstructed using filtered back projection (FBP......) and iterative reconstruction OSEM without corrections (IRNC) and compared against the recommended OSEM with corrections for attenuation and scatter and septal penetration (ACSC), before and after applying phantom calibration. Differences between databases were quantified using the percentage difference......-camera variability (-0.2%, p = 0.44). CONCLUSIONS: The ENC-DAT reference values are significantly dependent on the reconstruction and quantification methods and phantom calibration, while reducing the major part of their differences, is unable to fully harmonize them. Clinical use of any normal database, therefore...

[(123)I]FP-CIT ENC-DAT normal database

DEFF Research Database (Denmark)

Tossici-Bolt, Livia; Dickson, John C; Sera, Terez

2017-01-01

BACKGROUND: [(123)I]FP-CIT is a well-established radiotracer for the diagnosis of dopaminergic degenerative disorders. The European Normal Control Database of DaTSCAN (ENC-DAT) of healthy controls has provided age and gender-specific reference values for the [(123)I]FP-CIT specific binding ratio...... quantifications methods, BRASS and Southampton, and explores the performance of the striatal phantom calibration in their harmonisation. RESULTS: BRASS and Southampton databases comprising 123 ENC-DAT subjects, from gamma cameras with parallel collimators, were reconstructed using filtered back projection (FBP......) and iterative reconstruction OSEM without corrections (IRNC) and compared against the recommended OSEM with corrections for attenuation and scatter and septal penetration (ACSC), before and after applying phantom calibration. Differences between databases were quantified using the percentage difference...

Propagation speed of gamma radiation in brass

International Nuclear Information System (INIS)

Cavalcante, Jose T.P.D.; Silva, Paulo R.J.; Saitovich, Henrique

2009-01-01

The propagation speed (PS) of visible light -represented by a short frequency range in the large frame of electromagnetic radiations (ER) frequencies- in air was measured during the last century, using a great deal of different methods, with high precision results being achieved. Presently, a well accepted value, with very small uncertainty, is c= 299,792.458 Km/s) (c reporting to the Latin word celeritas: 'speed swiftness'). When propagating in denser material media (MM), such value is always lower when compared to the air value, with the propagating MM density playing an important role. Until present, such studies focusing propagation speeds, refractive indexes, dispersions were specially related to visible light, or to ER in wavelengths ranges dose to it, and with a transparent MM. A first incursion in this subject dealing with γ-rays was performed using an electronic coincidence counting system, when the value of it's PS was measured in air, C γ(air) 298,300.15 Km/s; a method that went on with later electronic improvements. always in air. To perform such measurements the availability of a γ-radiation source in which two γ-rays are emitted simultaneously in opposite directions -as already used as well as applied in the present case- turns out to be essential to the feasibility of the experiment, as far as no reflection techniques could be used. Such a suitable source was the positron emitter 22 Na placed in a thin wall metal container in which the positrons are stopped and annihilated when reacting with the medium electrons, in such way originating -as it is very well established from momentum/energy conservation laws - two gamma-rays, energy 511 KeV each, both emitted simultaneously in opposite directions. In all the previous experiments were used photomultiplier detectors coupled to NaI(Tl) crystal scintillators, which have a good energy resolution but a deficient time resolution for such purposes. Presently, as an innovative improvement, were used BaF 2 and Cs F crystal scintillators which display a much better time resolution. Incidentally, the use of γ-rays would a 110 W a determination of ER propagation values in non-transparent MM, non transparent for visible light; and in such a way better sketching their structural -or of other nature- properties that may interfere with this propagation. (author)

Eesti viib Rostrumile kolm teost

Index Scriptorium Estoniae

2001-01-01

11. juunil algab Pariisis rahvusvaheline heliloojate Rostrum, millel osalevad ka kolme noore eesti helilooja teosed: Mirjam Tally :Swinburne" Hasso Krulli luulele, Tõnis Kaumanni "Long Play" brass ansamblile ja Helena Tulve "Traces"

Greger Anderson & Ursula Geisler: Fruktan, fascination, frändskap [... etc.

DEFF Research Database (Denmark)

Fjeldsøe, Michael

2007-01-01

review essay: Greger Andersson & Ursula Geisler (eds.), Fruktan, fascination och frändskap. Det svenska musiklivet och nazismen, Malmö, 2006; Henrik Karlsson, Det fruktade märket. Wilhelm Peterson-Berger, antisemitismen och antinazismen, Malmö, 2005; Horst Weber and Stefan Drees (eds.), Quellen z...

Writing History in Exile

NARCIS (Netherlands)

de Baets, Antoon; Berger, Stefan

2016-01-01

WRITING HISTORY IN EXILE * Stefan Berger and Antoon De Baets, Reflections on Exile Historiography 11 * Antoon De Baets, Plutarch’s Thesis : the Contribution of Refugee Historians to Historical Writing (1945-2015) 27 * Peter Burke, Silver Lining : on Some Intellectual Benefits of Exile 39 * Ragnar

Proposals for the heating mechanism of an electron-bombarded body

International Nuclear Information System (INIS)

Geller, R.; Yerouchalmi, F.

1967-01-01

When a thermally isolated target in vacuum is bombarded by an electron beam the target becomes red. In this paper we try a heuristic explanation indicating how the kinetic power of the beam may be transformed into radiation power controlled by Stefan law. (authors) [fr

Paavst Johannes Paulus II läkitus kunstirahvale / Hendrik Lindepuu

Index Scriptorium Estoniae

Lindepuu, Hendrik

1999-01-01

Johannes Paulus II 1999. a. 4. aprilli kirjast 'Nendele, kes kirglikult ja pühendunult otsivad ilu uusi 'ilmutusi', et kinkida need maailmale kunstilise loomena'. Kunstnik kui sõnumi kuulutaja. Kas kirik vajab kunsti ja kunst kirikut.Czeslaw Milosz, Wojciech Kilar, Stefan Chwin paavsti kirjast

Multicomponent diffusivities from the free volume theory

NARCIS (Netherlands)

Wesselingh, J.A; Bollen, A.M

In this paper the free volume theory of diffusion is extended to multicomponent mixtures. The free volume is taken to be accessible for any component according to its surface. fraction. The resulting equations predict multicomponent (Maxwell-Stefan) diffusivities in simple liquid mixtures from pure

Oogstjaar voor CWI-onderzoekers ‘We investeren bewust in technologie’

NARCIS (Netherlands)

P.A. Boncz (Peter); M.L. Kersten (Martin); S. Manegold (Stefan); D. Riksen

2010-01-01

textabstractIn augustus 2009 ontvingen Peter Boncz, Stefan Manegold en Martin Kersten van het Centrum Wiskunde & Informatica de prestigieuze VLDB 10-year Best Paper Award. Hun winnende artikel beschreef tien jaar geleden de eerste ideeën over ‘hardware-aware’ ontwerpen van databasesystemen.

78 FR 14183 - Import Restrictions Imposed on Certain Archaeological Material From Belize

Science.gov (United States)

2013-03-05

... considerably, and may include lids, tripod feet, or other supplementary decoration. A. Common Vessels 1. Vases.... III. Metal--Objects in copper, gold, silver, brass, or other. Beaten or cast into shape, often...

Mapping the Galvanic Corrosion of Three Coupled Metal Alloys Using Coupled Multielectrode Array: Influence of Chloride Ion Concentration

Directory of Open Access Journals (Sweden)

Hong Ju

2018-04-01

Full Text Available The galvanic corrosion behavior of three metal alloys commonly used in water desalination plants was investigated using coupled multielectrode arrays consisting of aluminum-brass (HAl77-2, titanium alloy (TA2, and 316L stainless steel (316L SS. The three electrode types were coupled galvanically and arranged in different geometric configurations. Their corrosion behavior was characterized as a function of the chloride concentration. The potential and current distributions of the three-electrode coupling systems display electrochemical inhomogeneity. Generally, the aluminum-brass wires are anodic versus the titanium alloy and stainless steel. The titanium alloy acts as a primary cathode, and the 316L SS acts as a secondary cathode. The corrosion rate of aluminum-brass depends on the concentration of chloride ion, with a maximum corrosion rate at a chloride concentration of 2.3 wt %. In terms of geometrical arrangements, when the anodic HAl77-2 wires are located on the edge and are connected to the 316L SS wires in the coupling system, the main anodic area enlarges, especially in the area adjacent to the 316L SS wires. When the HAl77-2 wires are located between (in the middle of the two other types of wires, the corrosion rates are higher than the corrosion rates observed from the other two geometrical arrangements.

Degradation of automotive materials in palm biodiesel

International Nuclear Information System (INIS)

Fazal, M.A.; Haseeb, A.S.M.A.; Masjuki, H.H.

2012-01-01

As compared to petroleum diesel, biodiesel is more corrosive for automotive materials. Studies on the characterization of corrosion products of fuel exposed automotive materials are scarce. Automotive fuel system and engine components are made from different ferrous and non-ferrous materials. The present study aims to investigate the corrosion products of different types of automotive materials such as copper, brass, aluminum and cast iron upon exposure to diesel and palm biodiesel. Changes in fuel properties due to exposure of different materials were also examined. Degradation of metal surface was characterized by digital camera, SEM/EDS and X-ray diffraction (XRD). Fuel properties were examined by measuring TAN (total acid number), density and viscosity. Among the metal investigated, copper is found to be least resistant in biodiesel and formed comparatively more corrosion products than other metals. Upon exposure of metals in biodiesel, TAN number crosses the limit given by standard while density and viscosity remain within the acceptable range of limit. -- Highlights: ► Order of incompatible metals in palm biodiesel: copper > brass > aluminum > cast iron. ► The possible reactions for the degradation of copper and cast iron have been discussed. ► For metal exposed biodiesel, only TAN number crosses the limit while density and viscosity remain within the limit. ► Copper and copper based alloy (brass) increase TAN number comparatively more than other metals.

Generation of DNA profiles from fingerprints developed with columnar thin film technique.

Science.gov (United States)

Plazibat, Stephanie L; Roy, Reena; Swiontek, Stephen E; Lakhtakia, Akhlesh

2015-12-01

Partial-bloody fingerprints and partial fingerprints with saliva are often encountered at crime scenes, potentially enabling the combination of fingerprint and DNA analyses for absolute identification, provided that the development technique for fingerprint analysis does not inhibit DNA analysis. 36 partial-bloody fingerprints and 30 fingerprints wetted with saliva, all deposited on brass, were first developed using the columnar-thin-film (CTF) technique and then subjected to short tandem repeat (STR) DNA analysis. Equal numbers of samples were subjected to the same DNA analysis without development. Tris (8-hydroxyquinolinato) aluminum, or Alq3, was evaporated to deposit CTFs for development of the prints. DNA was extracted from all 132 samples, quantified, and amplified with AmpFlSTR(®) Identifiler Plus Amplification Kit. Additionally, DNA analyses were conducted on four blood smears on un-fingerprinted brass that had been subjected to CTF deposition and four blood smears on un-fingerprinted brass that had not been subjected to CTF deposition. Complete and concordant autosomal STR profiles of the same quality were obtained from both undeveloped and CTF-developed fingerprints, indicating that CTF development of fingerprints preserves DNA and does not inhibit subsequent DNA analysis. Even when there were no fingerprints, CTF deposition did not lead to inhibition of DNA analysis. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

All welded titanium condenser adopted in atomic power plants

International Nuclear Information System (INIS)

Iwai, Nagao; Itabashi, Yukihiko

1980-01-01

Condensers in power plants are shell-and-tube type heat exchangers. Most condensers use seawater as a coolant. Their tube and tube Sheets have usually been made of brass, which resists corrosion but cannot completely prevent it; as a result, tubes sometimes corrode or erode, allowing seawater to leak into the turbine cycle. As is well known, titanium has almost complete corrosion resistance against seawater; for this reason titanium tubes have replaced brass ones in some condensers operating in Europe and the USA. Even in such condensers, though, the tube plates have still been made of brass, tightly fitted to the titanium tubes, and it has proved impossible to eliminate seawater leakage at the junctions between tubes and tube Sheets. In order to eliminate such leakage completely, the tube Sheets must be made of titanium too, and the tubes and plates must be welded together. However, the welding of titanium requires an extremely celan atmosphere, a condition very difficult to fulfill at power plant construction sites, and the use of whole welded titanium tube condensers has long been considered a practical impossibility. Such all-titanium welded condensers have now been successfully constructed and installed in two 600 MW fossil power plants and one 1100 MW nuclear power plant. This paper describes the techniques used, add in addition reviews the various materials that have been used in condenser tubes. (author)

Mapping the Galvanic Corrosion of Three Coupled Metal Alloys Using Coupled Multielectrode Array: Influence of Chloride Ion Concentration.

Science.gov (United States)

Ju, Hong; Duan, JinZhuo; Yang, Yuanfeng; Cao, Ning; Li, Yan

2018-04-20

The galvanic corrosion behavior of three metal alloys commonly used in water desalination plants was investigated using coupled multielectrode arrays consisting of aluminum-brass (HAl77-2), titanium alloy (TA2), and 316L stainless steel (316L SS). The three electrode types were coupled galvanically and arranged in different geometric configurations. Their corrosion behavior was characterized as a function of the chloride concentration. The potential and current distributions of the three-electrode coupling systems display electrochemical inhomogeneity. Generally, the aluminum-brass wires are anodic versus the titanium alloy and stainless steel. The titanium alloy acts as a primary cathode, and the 316L SS acts as a secondary cathode. The corrosion rate of aluminum-brass depends on the concentration of chloride ion, with a maximum corrosion rate at a chloride concentration of 2.3 wt %. In terms of geometrical arrangements, when the anodic HAl77-2 wires are located on the edge and are connected to the 316L SS wires in the coupling system, the main anodic area enlarges, especially in the area adjacent to the 316L SS wires. When the HAl77-2 wires are located between (in the middle of) the two other types of wires, the corrosion rates are higher than the corrosion rates observed from the other two geometrical arrangements.

Losing Traction and the Art of Slip-Sliding Away: Or, Getting over Education for Sustainable Development

Science.gov (United States)

Jickling, Bob

2016-01-01

This response problematizes Stefan Bengtsson's (2016) defense of education for sustainable development. He argues that sustainable development and education for sustainable development are not globalizing and hegemonic discourses, as some have claimed, and uses case-study analysis of Vietnamese policy documents to support his claims. He observes…

Southern Caucasus in Perspective. The scholarly debate through the pages of Seminarium Kondakovianum and Skythika (1927-1938)

Czech Academy of Sciences Publication Activity Database

Lovino, Francesco

-, Supplementum (2016), s. 36-51 ISSN 2336-3452 Institutional support: RVO:68378033 Keywords : art and archaeology historiography * Seminarium Kondakovianum * Michail Rostovtzeff * Stefan Przeworski * Georgij Čubinašvili * Caucasus * church of Saint George in Samtsevrisi * animal style * bronze statuettes Subject RIV: AL - Art, Architecture, Cultural Heritage

Pulsed electric field processing for fruit and vegetables

Science.gov (United States)

This month’s column reviews the theory and current applications of pulsed electric field (PEF) processing for fruits and vegetables to improve their safety and quality. This month’s column coauthor, Stefan Toepfl, is advanced research manager at the German Institute of Food Technologies and professo...

Berliini filmifestivali finishis ei kohtu kõik / Lauri Kärk

Index Scriptorium Estoniae

Kärk, Lauri, 1954-

2007-01-01

57. Berlinale filmiturul läheb hästi Ernitsa-Põldma joonisfilmil "Leiutajateküla Lotte"; samas nähtud Vene mängufilmist "Vaba ujumine" ("Svobodnoje plavanije"; režii Boriss Hlebnikovilt). Võistlusfilme - hiinlase Wang Quan'ani "Tuya abielu", austerlase Stefan Ruzowitzky "Võltsijad" ("Die Fälscher")

A World Where All Worlds Cohabit

Science.gov (United States)

Teamey, Kelly; Mandel, Udi

2016-01-01

In response to Stefan Bengtsson's search for alternatives to Education for Sustainable Development practices outside the mainstream of the state and its policy formulations, this response outlines how our journey, experiences, and approaches reflect a de-professionalizing encounter with autonomous places of learning emerging from indigenous…

TNO en Aedes over voordelen regisserend opdrachtgeverschap bij planmatig onderhoud

NARCIS (Netherlands)

Arts, S.

2016-01-01

Regisserend opdrachtgeverschap is voor corporaties een goede manier om met planmatig onderhoud om te gaan. Dat stellen Stefan Arts van TNO en Maarten Georgius van Aedes, die onderzoek deden naar dat nieuwe opdrachtgeverschap. Hoe het moet, staat helder op papier. Maar de praktijk is weerbarstig, zo

Pimedate ööde festival ulatub teatrikinno / Jaanus Kaasik

Index Scriptorium Estoniae

Kaasik, Jaanus

2004-01-01

Rakvere Teatrikinos näidatavatest filmidest : noortefilmid "Terkel jamas", režissöör Stefan Fjeldmark, "Cool", režissöör Theo van Gogh; filmid "Sisemeri", režissöör Alejandro Amenabar ja "Nikotiin", režissöör Hugo Rodriguez

AUTHOR INDEX

Indian Academy of Sciences (India)

Maji Kaushik. A time-dependent. Fourier grid. Hamiltonian-based formulation of time- dependent multi-configuration Hartree method. L983. Majumdar A S ... N = 1 super quantum chromodynamics and fractional branes. 721. Philip J see Alex A V. 87. Pokorski Stefan. Electroweak breaking and supersymme- try breaking. 369.

RATIONALIZATION OF THE SCHEMA OF SACRIFICIAL ANODES USING FROM THE STANDPOINT OF MATERIAL AND POWER RESOURCES ECONOMY

Directory of Open Access Journals (Sweden)

S. E. Chikilev

2008-01-01

Full Text Available The calculations, allowing to optimize using of sacrificial copper anodes in the process of wire brassing, and also the results of experimental matching of material for insoluble anodes are given.

Tratteggio retouch and its derivatives as an image reintegration solution in the process of restoration

Directory of Open Access Journals (Sweden)

Magdalena Grenda

2010-11-01

Full Text Available L’article traite du problème de retouche dans la conservation- restauration du papier, concernant en particulier la retouche tratteggio et ses derivatifs que peuvent être la solution de la réintegration de l’image, non si populaire parmi les restaurateurs du papier. C’était la partie du projet de Maîtrise de l’auteur d’examiner la possibilité de l’usage de retouches comme tratteggio dans la restauration de l’affiche de cinéma polonaise de Stefan Norblin, imprimée en lithographie en couleurs.The article describes issues concerning retouch in paper conservation- restoration with particular consideration of tratteggio retouch and its derivatives as an image reintegration solution, not very popular among paper conservators. It was a part of author’s MA project to examine the possibility of using tratteggio- like retouches during the restoration of 20th century Polish film poster by Stefan Norblin, printed in colour litograph.

incidence of heavy metals in kano metropolis drinking water sources

African Journals Online (AJOL)

userpc

corrosion of brass fittings of certain submersible pumps and pipes used in borehole and taps specifically. The contamination of well with heavy metals might be due to seepage of sewage ... Chloride determination (Agumetric method):.

Machinability evaluation of titanium alloys (Part 2)--Analyses of cutting force and spindle motor current.

Science.gov (United States)

Kikuchi, Masafumi; Okuno, Osamu

2004-12-01

To establish a method of determining the machinability of dental materials for CAD/CAM systems, the machinability of titanium, two titanium alloys (Ti-6Al-4V and Ti-6Al-7Nb), and free-cutting brass was evaluated through cutting force and spindle motor current. The metals were slotted using a milling machine and square end mills at four cutting conditions. Both the static and dynamic components of the cutting force represented well the machinability of the metals tested: the machinability of Ti-6Al-4V and Ti-6Al-7Nb was worse than that of titanium, while that of free-cutting brass was better. On the other hand, the results indicated that the spindle motor current was not sensitive enough to detect the material difference among the titanium and its alloys.

Fouling communities and degradation of archeological metals in the coastal sea of the Southwestern Gulf of Mexico.

Science.gov (United States)

López Garrido, Pedro H; González-Sánchez, J; Escobar Briones, Elva

2015-01-01

Corrosion and biofouling phenomena of cast iron and brass were evaluated under natural conditions to determine the degradation process of archeological artifacts. Field exposure studies of experimental materials were conducted over 15 months at an offshore position in the sea of Campeche in the Gulf of Mexico. Corrosion was determined by gravimetric measurements. The community structure of the benthic assemblage inhabiting the surfaces of both materials was evaluated. A total of 53 species was identified. The community in both cases was composed of a small number of species. Encrusting, attached and erect life forms were dominant on iron. Attached life forms were dominant on brass. Biofouling produced a decrease in the weight loss measurements of cast iron samples. Biofouling provided a beneficial factor for in situ preservation of iron archeological artifacts in wreck sites.

Simultaneous determination of trace-levels of alloying zinc and copper by semi-mercury-free potentiometric stripping analysis with chemometric data treatment

DEFF Research Database (Denmark)

Andersen, Jens Enevold Thaulov; Hansen, Elo Harald

1998-01-01

Assays of copper and zinc in brass samples were performed by Semi-Mercury Free Potentiometric Stripping Analysis (S-MF PSA) using a thin-film mercury covered glassy-carbon working electrode and dissolved oxygen as oxidizing agent during the stripping step. The stripping peak transients were...... resolved by chemometrics which enabled simultaneous determination of both the copper and the zinc concentrations, thereby eliminating the conventional necessary pretreatment of the sample solution, such as initial addition of Ga(III) or solvent extraction of copper. The brass samples were diluted...... by factors in the range 2.104 - 5.105 which resulted in quantification of the copper and of zinc contents comparable to the specified values within 10%. On the basis of the chemometric treatment, an empirical expression is deduced relating the stripping time to the recorded potential....

DPM — efficient storage in diverse environments

International Nuclear Information System (INIS)

Hellmich, Martin; Furano, Fabrizio; Smith, David; Rocha, Ricardo Brito da; Ayllón, Alejandro Álvarez; Manzi, Andrea; Keeble, Oliver; Calvet, Ivan; Regala, Miguel Antonio

2014-01-01

Recent developments, including low power devices, cluster file systems and cloud storage, represent an explosion in the possibilities for deploying and managing grid storage. In this paper we present how different technologies can be leveraged to build a storage service with differing cost, power, performance, scalability and reliability profiles, using the popular storage solution Disk Pool Manager (DPM/dmlite) as the enabling technology. The storage manager DPM is designed for these new environments, allowing users to scale up and down as they need it, and optimizing their computing centers energy efficiency and costs. DPM runs on high-performance machines, profiting from multi-core and multi-CPU setups. It supports separating the database from the metadata server, the head node, largely reducing its hard disk requirements. Since version 1.8.6, DPM is released in EPEL and Fedora, simplifying distribution and maintenance, but also supporting the ARM architecture beside i386 and x86 6 4, allowing it to run the smallest low-power machines such as the Raspberry Pi or the CuBox. This usage is facilitated by the possibility to scale horizontally using a main database and a distributed memcached-powered namespace cache. Additionally, DPM supports a variety of storage pools in the backend, most importantly HDFS, S3-enabled storage, and cluster file systems, allowing users to fit their DPM installation exactly to their needs. In this paper, we investigate the power-efficiency and total cost of ownership of various DPM configurations. We develop metrics to evaluate the expected performance of a setup both in terms of namespace and disk access considering the overall cost including equipment, power consumptions, or data/storage fees. The setups tested range from the lowest scale using Raspberry Pis with only 700 MHz single cores and a 100 Mbps network connections, over conventional multi-core servers to typical virtual machine instances in cloud settings. We evaluate the

Colon cancer and the consumption of red and processed meat: an ...

African Journals Online (AJOL)

effect. Although this association was mainly observed for colorectal cancer, associations were also found for pancreatic and prostate ... vegetarian diet in order to prevent colon cancer. ... cancers than males at 5.2% versus 4.8%.3 Stefan4 explains that .... Smoking. X-radiation, gamma radiation. Processed meat consumption.

Detection of fuel element failures at the gas cooled reactors; Zaznavanje razpok na gorilnih elementih plinsko hlajenega reaktorja

Energy Technology Data Exchange (ETDEWEB)

Bremsak, P; Ranzel, S; Ogrin, R; Pisanski, C [Institut Jozef Stefan, Ljubljana (Yugoslavia)

1964-07-01

This paper describes the system for measuring the concentration of released Kr and Xe in the cooling gas. The system developed in the Jozef Stefan Institute is efficient and suitable for application The method is based on electrostatic collection of daughter elements from radioactive decay of Xe and Kr.

Ruling Relationships in Sustainable Development and Education for Sustainable Development

Science.gov (United States)

Berryman, Tom; Sauvé, Lucie

2016-01-01

It is from historical perspectives on more than 40 years of environment related education theories, practices, and policies that we revisit what might otherwise become a tired conversation about environmental education and sustainable development. Our contemporary critical analysis of Stefan Bengtsson's research about policy making leads us to…

Adolfo Bartoli and the problem of radiant heat

DEFF Research Database (Denmark)

Kragh, Helge; Carazza, Bruno

1989-01-01

development of black-body theory and light pressure research. This influence was mainly due to Boltzmann, who came to the Stefan-Boltzmann radiation law via a reworking of Bartoli's thought experiment. However, contrary to what is usually assumed, Bartoli was himself reluctant to admit the existence of light...

Detection of fuel element failures at the gas cooled reactors

International Nuclear Information System (INIS)

Bremsak, P.; Ranzel, S.; Ogrin, R.; Pisanski, C.

1964-01-01

This paper describes the system for measuring the concentration of released Kr and Xe in the cooling gas. The system developed in the Jozef Stefan Institute is efficient and suitable for application The method is based on electrostatic collection of daughter elements from radioactive decay of Xe and Kr

Eine Welt jenseits von Facebook: alternative soziale Medien: die Forschungsagenda des Netzwerks Unlike Us

NARCIS (Netherlands)

Lovink, G.

2012-01-01

The current issue of the Zeitschrift für Medien- und Kulturforschung presents a discussion of social media's future. Geert Lovink and Stefan Heidenreich debate the sense and non-sense of network-critique in light of the internet's modified usage and perception, which is commonly labeled Web 2.0.

Ventzislavi ja Nedjalko urbanistlik muinasjutt / Ott Karulin

Index Scriptorium Estoniae

Karulin, Ott, 1980-

2008-01-01

Teatritrupi Rimini Protokoll etendusest "Cargo Sofia - Tallinn", mille vormiks on linnas ringi sõitev veoauto, mille üks külg on klaasist ning laadungiks vaatajad. Lavastaja Stefan Kaegi Šveitsist, Tallinna lavastaja Jörg Karrenbauer Saksamaalt, autojuhid Ventzislavi Borisov ja Nedjalko Nedjalkov Bulgaariast. Etendused Tallinnas 4. - 12. III

Race and Repression in a Dance Routine: A Response to Ramaekers and Vlieghe

Science.gov (United States)

Standish, Paul

2015-01-01

Stefan Ramaekers and Joris Vlieghe's "Infants, childhood and language in Agamben and Cavell: education as transformation" is an insightful discussion of an important facet of educational experience. In the article, they consider a Fred Astaire dance sequence from the 1953 Vincente Minnelli film, "The Band Wagon," in combination…

Tõkestatud "Magnus" võitis kaks auhinda / Annika Koppel

Index Scriptorium Estoniae

Koppel, Annika

2008-01-01

Kadri Kõusaare film "Magnus" (produtsent Donal Fernandes) võitis Saksamaal "GoEasti" Ida- ja Kesk-Euroopa filmikunsti festivalil peapreemia Kuldse Liilia ja rahvusvahelise filmiajakirjanike ühingu preemia. Ka teistest filmidest : serblase Stefan Arsenijevici "Armastus ja teised kuriteod", ukrainlanna EVa Nejmani "Jõe ääres", venelase Aleksei Popogrebski "Lihtsad asjad"

Mutual Diffusion in the Ternary Mixture of Water Plus Methanol Plus Ethanol and Its Binary Subsystems

Czech Academy of Sciences Publication Activity Database

Pařez, Stanislav; Guevara-Carrion, G.; Hasse, H.; Vrabec, J.

2013-01-01

Roč. 15, č. 11 (2013), s. 3985-4001 ISSN 1463-9076. [EMLG/JMLG Annual Meeting. Eger, 05.09.2012-09.09.2012] Institutional support: RVO:67985858 Keywords : molekular- dynamics simulations * maxwell-stefan diffusitives * activity-coefficient models Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 4.198, year: 2013

6 Home Cleaning Recipes

Science.gov (United States)

... aluminum, brass, ceramics, chrome, copper, fiberglass, glass/quartz, plastic, and steel. GLASS CLEANER 1 cup vinegar 1 ... originally filled with commercial cleaning products. Instead, reuse plastic water bottles.  Always place a label on the ...

Experience and perspectives of nuclear power plant reliability evaluation at Institute J. Stefan; Izkusnje in perspektive vrednotenja zanesljivosti jedrskih elekrarn na Institutu Jozef Stefan

Energy Technology Data Exchange (ETDEWEB)

Susnik, J [Institut Jozef Stefan, Ljubljana (Yugoslavia)

1979-07-01

First a short report on development of computer programs for the reliability evaluation and the findings regarding the adequate reliability of Nuclear Power Plant safety systems are given. Then evaluation of the general NPP availability situation is discussed and suggestions for planning and achieving an adequate high availability are presented. (author)

Charliecloud: Unprivileged containers for user-defined software stacks in HPC

Energy Technology Data Exchange (ETDEWEB)

Priedhorsky, Reid [Los Alamos National Laboratory; Randles, Timothy C. [Los Alamos National Laboratory

2016-08-09

Supercomputing centers are seeing increasing demand for user-defined software stacks (UDSS), instead of or in addition to the stack provided by the center. These UDSS support user needs such as complex dependencies or build requirements, externally required configurations, portability, and consistency. The challenge for centers is to provide these services in a usable manner while minimizing the risks: security, support burden, missing functionality, and performance. We present Charliecloud, which uses the Linux user and mount namespaces to run industry-standard Docker containers with no privileged operations or daemons on center resources. Our simple approach avoids most security risks while maintaining access to the performance and functionality already on offer, doing so in less than 500 lines of code. Charliecloud promises to bring an industry-standard UDSS user workflow to existing, minimally altered HPC resources.

Karikakramäng eesriide taga : Tšehhi uue laine eriprogramm PÖFFil / Tristan Priimägi

Index Scriptorium Estoniae

Priimägi, Tristan, 1976-

2010-01-01

14. Pimedate Ööde filmifestivali üks märksõnu on "uus laine". Näha saab Tšehhoslovakkias 1960ndatel valminud mängufilme (rež.-d Milos Forman, Stefan Uher, Jan Nemec, Vojtech Jasny, Eduard Grecner, Dusan Hanak, Juraj Jakubisko, Elo Havetta, Vera Chytilova ja Ivan Passer)

Teisel pool fotot : üleval 70 tööd / Ragne Nukk

Index Scriptorium Estoniae

Nukk, Ragne, 1984-

2011-01-01

Rahvusvaheline fotonäitus "Teisele poole" Kumu Kunstimuuseumis 8. jaanuarini 2012, kuraator Adam Budak. Eksponeeritakse kollaaže, fotodest valmistatud skulptuure, videosid, fotosid, installatsioone. Lühidalt portugali kunstniku Helena Almeida, sakslase Stefan Burgeri, korea kunstniku Sunah Choi, ameeriklase Marlo Pascuali töödest. Näitus toimub Tallinna fotokuu raames

Pramana – Journal of Physics | Indian Academy of Sciences

Indian Academy of Sciences (India)

We review some recent studies about the parameter determination of top quarks, bosons, Higgs bosons, supersymmetric particles and in the ADD model of extra dimensions at a linear collider. Author Affiliations. Alfred Bartl1 Stefan Hesselbach1. Institut für Theoretische Physik, Universität Wien, Boltzmanngasse 5, ...

Some nonlinear dynamic inequalities on time scales

Indian Academy of Sciences (India)

In 1988, Stefan Hilger [10] introduced the calculus on time scales which unifies continuous and discrete analysis. Since then many authors have expounded on various aspects of the theory of dynamic equations on time scales. Recently, there has been much research activity concerning the new theory. For example, we ...

Vanilla Ninja hitt telesaate tunnuslaul

Index Scriptorium Estoniae

2004-01-01

Popansambli Vanilla Ninja laul "Blue Tattoo" valiti Saksamaal Pro 7 telesaate "Aupäev - otsus poksiringis" (Der Tag der Ehre - Entscheidung im Boxring) tunnusmeloodiaks. Eesti popansambel kutsuti külla ka Stefan Raabi show'sse TV Total Pro 7 kanalil ja muusikakanali Viva jõulushow'sse "Your Stars for Christmas"

Destroy The Bank! (case)

NARCIS (Netherlands)

G.J. Van der Star; dr. A. Maas

2016-01-01

DZ Bank faces some significant challenges for the near future. One of them is the way payments are being made. This case is about Stefan, the Strategic Management Consultant of DZ Bank. He struggles with innovations and new technologies, such as Bitcoins. What does this mean for the future of the

Changes in steel can be heard : The knock-on effect of flipping crystal lattices

NARCIS (Netherlands)

Van Bohemen, S.; Den Ouden, G.; Van de Graaf, A.

2002-01-01

Cracks in welds are a major problem in the steel processing industry. One of the causes is a change in the microstructure that occurs if steel cools too rapidly during the welding process. Researcher Stefan van Bohemen of the Applied Sciences faculty at TU Delft demonstrates how this change is

Body Piercing

Science.gov (United States)

... site and jewelry carefully. Avoid jewelry made of nickel or brass. These metals can cause allergic reactions. ... KnowRead Article >>Genetic Testing: What You Should KnowOccupational Exposure to LeadRead Article >>Occupational Exposure to Lead Visit ...

Validation of the Turkish version of the Breast Reduction Assessed Severity Scale.

Science.gov (United States)

Kececi, Yavuz; Sir, Emin; Zengel, Baha

2013-01-01

Measuring patient-reported outcomes has become increasingly important in cosmetic and reconstructive breast surgery. There is no validated questionnaire in Turkish to evaluate quality-of-life issues for patients with mammary hypertrophy. The authors describe the reliability and validity of a translated Breast Reduction Assessed Severity Scale (BRASS) in evaluating Turkish patients. The BRASS, developed by Sigurdson et al, was translated into Turkish adhering strictly to the guidelines of questionnaire translations. Statistical analysis was carried out with Cronbach's α to test the internal consistency and intraclass correlation coefficient for test-retest reliability. Exploratory factor analysis was carried out using principal component analysis with oblimin rotation to test its construct validity. Correlations between subscales identified in the factor analysis and corresponding domains in the Short Form-36 and Rosenberg Self-Esteem Scale were analyzed. The total instrument was found to have an α coefficient of 0.92 and subscale α coefficients ranging from 0.76 to 0.87. Intraclass correlation coefficient was 0.93 for the total scale and ranged from 0.81 to 0.91 for the subscales. Exploratory factor analysis resulted in a 5-factor structure: physical implications, body pain, physical appearance, poor self-concept, and negative social interactions. With this study, the reliability and validity of the Turkish version of the BRASS were revealed. This translated version can be used to evaluate the effect of mammary hypertrophy on quality of life in Turkish patients.

Strengthening mechanisms in a high-strength bulk nanostructured Cu–Zn–Al alloy processed via cryomilling and spark plasma sintering

International Nuclear Information System (INIS)

Wen, Haiming; Topping, Troy D.; Isheim, Dieter; Seidman, David N.; Lavernia, Enrique J.

2013-01-01

A bulk nanostructured alloy with the nominal composition Cu–30Zn–0.8Al wt.% (commercial designation brass 260) was fabricated by cryomilling of brass powders and subsequent spark plasma sintering (SPS) of the cryomilled powders, yielding a compressive yield strength of 950 MPa, which is significantly higher than the yield strength of commercial brass 260 alloys (∼200–400 MPa). Transmission electron microscopy investigations revealed that cryomilling results in an average grain diameter of 26 nm and a high density of deformation twins. Nearly fully dense bulk samples were obtained after SPS of cryomilled powders, with average grain diameter 110 nm. After SPS, 10 vol.% of twins is retained with average twin thickness 30 nm. Three-dimensional atom-probe tomography studies demonstrate that the distribution of Al is highly inhomogeneous in the sintered bulk samples, and Al-containing precipitates including Al(Cu,Zn)–O–N, Al–O–N and Al–N are distributed in the matrix. The precipitates have an average diameter of 1.7 nm and a volume fraction of 0.39%. Quantitative calculations were performed for different strengthening contributions in the sintered bulk samples, including grain boundary, twin boundary, precipitate, dislocation and solid-solution strengthening. Results from the analyses demonstrate that precipitate and grain boundary strengthening are the dominant strengthening mechanisms, and the calculated overall yield strength is in reasonable agreement with the experimentally determined compressive yield strength

BWR fuel experience with zinc injection

International Nuclear Information System (INIS)

Levin, H.A.; Garcia, S.E.

1995-01-01

In 1982 a correlation between low primary recirculation system dose rates in BWR's and the presence of ionic zinc in reactor water was identified. The source of the zinc was primarily from Admiralty brass condensers. Plants with brass condensers are called ''natural zinc'' plants. Brass condensers were also a source of copper that was implicated in crude induced localized corrosion (CILC) fuel failures. In 1986 the first BWR intentionally injected zinc for the benefits of dose rate control. Although zinc alone was never implicated in fuel degradation of failures, a comprehensive fuel surveillance program was initiated to monitor fuel performance. Currently there are 14 plants that are injecting zinc. Six of these plants are also on hydrogen water chemistry. This paper describes the effect on both Zircaloy corrosion and the cruding characteristics as a result of these changes in water chemistry. Fuel rod corrosion was found to be independent of the specific water chemistry of the plants. The corrosion behavior was the same with the additions of zinc alone or zinc plus hydrogen and well within the operating experience for fuel without either of these additions. No change was observed in the amounts of crude deposited on the fuel rods, both for the adherent and loosely held deposits. One of the effects of the zinc addition was the trend to form more of the zinc rich iron spinel in the fuel deposits rather than the hematite deposits that are predominantly formed with non additive water chemistry

Preparation and characterization of magnesium–aluminium–silicate ...

Indian Academy of Sciences (India)

Unknown

and the melt was poured into graphite/brass moulds. Glass disc/cylinder of ... of the sample was measured by indentation technique using Vickers diamond pyramid .... Machinability of samples was tested by changing vari- ous parameters i.e. ...

9 CFR 96.9 - Casings admitted on disinfection; sealing; transfer and disinfection.

Science.gov (United States)

2010-01-01

... container in the space where the ends of the container enter the staves, by means of red sealing wax imprinted with the No. 3 Veterinary Services brass brand from which “insp'd & p's'd” and the establishment...

Energy harvesting from vibration using a piezoelectric membrane

Energy Technology Data Exchange (ETDEWEB)

Ericka, M.; Vasic, D.; Costa, F.; Tliba, S. [Ecole Normale Superieure de Cachan, Systemes et Applications des Technologies de l' Information et de l' Energie (SATIE, UMR 8029), 94 - Cachan (France); Poulin, G. [Ecole Nationale Superieure d' Ingenieurs Electriciens de Grenoble, Laboratoire d' Automatique de Grenoble, 38 (France)

2005-09-01

In this paper we investigate the capability of harvesting the electric energy from mechanical vibrations in a dynamic environment through a piezoelectric membrane transducer. This transducer consists of 2 layers lead zirconate titanate (PZT)/brass, the brass layer is embedded over the whole circumference by epoxy adhesive. A very small vibration gives a consequent deformation of the membrane which generates electric energy. Due to the impedance matrices connecting the efforts and flows of the membrane, we have established the dynamic electric equivalent circuit of the transducer. In a first study and in order to validate theoretical results, we performed experiments with a vibrating machine moving a macroscopic 25 mm diameter piezoelectric membrane. A power of 1.8 mW was generated at the resonance frequency (2.58 kHz) across a 56 k{omega} optimal resistor and for a 2 g acceleration. (authors)

Investigation of the susceptibility to solidification cracking in copper alloys

Energy Technology Data Exchange (ETDEWEB)

Warren, Richard [Avesta Sheffield R and D, Avesta (Sweden)

2000-04-01

A test procedure has been developed at LuTH for investigating the susceptibility to cracking at high temperatures in weldments. It has been proposed to adapt this testing procedure to investigate the cracking susceptibility at high temperatures during strip casting of certain copper alloys. Six different materials were selected for investigation - OFHC copper, tellurium containing copper, 4% tin bronze, 6% tin bronze, 30% zinc brass and 35% zinc brass. The aim of the investigation was to characterize the cracking susceptibility of the candidate materials so as to be able to rank and compare them in a quantitative manner. A further aim of the work was to study the suitability of using the data on the cracking indices generated in the present work in thermomechanical models of the casting process to optimize the casting parameters for each of the materials.

The Compact Muon Solenoid (CMS) hadron calorimeter

International Nuclear Information System (INIS)

Hagopian, Vasken

1999-01-01

The Hadron Calorimeter of the CMS detector for the CERN LHC accelerator is designed to measure hadron jets as well as single hadrons. It has six segments. The central barrel made of brass and scintillators covers the vertical bar η vertical bar range of about 0 to 1.3. Two End Caps, also made of brass and scintillators extends the vertical bar η vertical bar range to 3.0. Two Forward calorimeters made of iron and quartz fibers cover the range 3.0 to 5.0. Since the barrel portion of the calorimeter is only 6.5 interaction lengths, the outer barrel will sample, by scintillators, outside the magnet coil and cryostat. Progress has been made on all subsystems and prototypes have been built. We now have a better understanding of magnetic field effects on calorimeters

Al-Dulimi and Montana Management Inc. v. Switzerland / Stefan Kadelbach

Index Scriptorium Estoniae

Kadelbach, Stefan

2016-01-01

Euroopa Inimõiguste Kohtu lahendist asjas Al-Dulimi ja Montana Management Inc vs. Šveits, mis puudutas ÜRO julgeolekunõukogu resolutsiooni, millega pandi riikidele kohustus külmutada viivitamatult ka Iraagi vanemametnikele või nende äriühingutele kuuluv vara

New Fundamental Light Particle and Breakdown of Stefan-Boltzmann's Law

Directory of Open Access Journals (Sweden)

Minasyan V.

2011-04-01

Full Text Available Recently, we predicted the existence of fundamental particles in Nature, neutral Light Particles with spin 1 and rest mass m = 1 : 8 10E-4 me, in addition to electrons, neutrons and protons. We call these particles Light Bosons because they create electromagnetic field which represents Planck’s gas of massless photons together with a gas of Light Par- ticles in the condensate. Such reasoning leads to a breakdown of Stefan–Boltzmann’s law at low temperature. On the other hand, the existence of new fundamental neutral Light Particles leads to correction of such physical concepts as Bose-Einstein conden- sation of photons, polaritons and exciton polaritons.

The Olympic Games: Showcases of Internationalism and Modernity in Asia

Directory of Open Access Journals (Sweden)

Robin Kietlinski

2017-09-01

Full Text Available Stefan Huebner. Pan-Asian Sports and the Emergence of Modern Asia, 1913-1974. Singapore: National University of Singapore Press, 2016. 416 pp. $42 (paper. Jessamyn Abel. The International Minimum: Creativity and Contradiction in Japan's Global Engagement, 1933-1964. Honolulu: University of Hawai‘i Press, 2015. 344 pp. $54 (cloth.

Democracy and Education in the Twenty-First Century: Deweyan Pragmatism and the Question of Racism

Science.gov (United States)

Neubert, Stefan

2010-01-01

Why is John Dewey still such an important philosopher today? Writing from the perspective of the Cologne Program of Interactive Constructivism, Stefan Neubert tries in what follows to give one possible answer to this question. Neubert notes that Cologne constructivism considers Dewey in many respects as one of the most important predecessors of…

Finding Truth in "Lies": Nietzsche's Perspectivism and Its Relation to Education

Science.gov (United States)

Jonas, Mark E.; Nakazawa, Yoshiaki M.

2008-01-01

In his 2001 article "Teaching to Lie and Obey: Nietzsche on Education", Stefan Ramaekers defends Nietzsche's concept of perspectivism against the charge that it is relativistic. He argues that perspectivism is not relativistic because it denies the dichotomy between the "true" world and the "seeming" world, a dichotomy central to claims to…

Assessment: Monitoring & Evaluation in a Stabilisation Context

Science.gov (United States)

2010-09-15

http://www.oecd.org/dataoecd/23/27/35281194.pdf b. SIDA (2004), The Logical Framework Approach. A summary of the theory behind the LFA method...en_21571361_34047972_39774574 _1_1_1_1,00.pdf 3. SIDA (2004), Stefan Molund and Göran Schill, Looking Back, Moving Forward, Sida Evaluation Manual. Available at

Variable Deflection Response of Sensitive CNT-on-Fiber Artificial Hair Sensors from CNT Synthesis in High Aspect Ratio Microcavities (Postprint)

Science.gov (United States)

2015-04-01

are successful in deflecting the hair even though no resistance change is observed, but the deflection is not electrically transduced by the nanotubes...Letters, 387(4–6), 307-311 (2004). [31] J. Stefan, “ Uber Einige Probleme der Theorie der Warmeleitung,” S.-B. Wien-Akad. Mat. Natur., 98, 173-184 (1889

Journal of Biosciences | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Journal of Biosciences. Will D Penny. Articles written in Journal of Biosciences. Volume 32 Issue 1 January 2007 pp 129-144 Articles. Dynamic causal models of neural system dynamics: current state and future extensions · Klaas E Stephan Lee M Harrison Stefan J Kiebel Olivier David Will D Penny Karl J ...

The effects of microstructure on crack initiation in liquid-metal environments

CSIR Research Space (South Africa)

Fernandes, PJL

1997-09-01

Full Text Available Liquid-metal-induced embrittlement under tensile test conditions is identified by the existence of a characteristic ductility trough. In this study, the effect of molten gallium on the behaviour of two brass alloys with different microstructures...

76 FR 70706 - Frontseating Service Valves From the People's Republic of China: Final Results of the 2008-2010...

Science.gov (United States)

2011-11-15

... also accessible on the Web at http://ia.ita.doc.gov/frn . The paper copy and electronic version of the... Include French Import Data to Value Brass Bar Comment 4: Whether To Use the Average of HTS 7407.21.10 and...

Vol. 4(1), S/No 13, January, 2015:1-17 ISSN: 2225-8590 (Print ...

African Journals Online (AJOL)

DR Nneka

2015-01-13

Jan 13, 2015 ... headed by the oldest man (odionwere pl. edionwere) who was assisted by a village ... the emergence of Ogiso Ere, iron smith had existed in Benin. ..... brass mask given his predecessor by the Oba Esigie of Benin symbolized ...

Comparative corrosion resistance of selected metals and nonmetals

International Nuclear Information System (INIS)

Anon.

1977-01-01

The relative corrosion resistance to 140 corrosive media is tabulated for the following substances: stainless steels 302, 303, 304, 305, 316, 410, 416, and 430, brass, silicon bronze, copper alloy 110, monel alloy 400, aluminum, and nylon (type 6/6)

Basic Guidelines for Performance Monitoring of Shipboard Machinery

Science.gov (United States)

1975-11-01

failure. The sensors will electrically indicate the buildup of particles ( aluminum , steel, magnesium, brass, etc.) as well as strain these particles...manual is a "consolidated sourcebook covering all aspects relating to accuracy, application, and usefulness of thermometric methods," specifically

Basal melting driven by turbulent thermal convection

Science.gov (United States)

Rabbanipour Esfahani, Babak; Hirata, Silvia C.; Berti, Stefano; Calzavarini, Enrico

2018-05-01

Melting and, conversely, solidification processes in the presence of convection are key to many geophysical problems. An essential question related to these phenomena concerns the estimation of the (time-evolving) melting rate, which is tightly connected to the turbulent convective dynamics in the bulk of the melt fluid and the heat transfer at the liquid-solid interface. In this work, we consider a convective-melting model, constructed as a generalization of the Rayleigh-Bénard system, accounting for the basal melting of a solid. As the change of phase proceeds, a fluid layer grows at the heated bottom of the system and eventually reaches a turbulent convection state. By means of extensive lattice-Boltzmann numerical simulations employing an enthalpy formulation of the governing equations, we explore the model dynamics in two- and three-dimensional configurations. The focus of the analysis is on the scaling of global quantities like the heat flux and the kinetic energy with the Rayleigh number, as well as on the interface morphology and the effects of space dimensionality. Independently of dimensionality, we find that the convective-melting system behavior shares strong resemblances with that of the Rayleigh-Bénard one, and that the heat flux is only weakly enhanced with respect to that case. Such similarities are understood, at least to some extent, considering the resulting slow motion of the melting front (with respect to the turbulent fluid velocity fluctuations) and its generally little roughness (compared to the height of the fluid layer). Varying the Stefan number, accounting for the thermodynamical properties of the material, also seems to have only a mild effect, which implies the possibility of extrapolating results in numerically delicate low-Stefan setups from more convenient high-Stefan ones. Finally, we discuss the implications of our findings for the geophysically relevant problem of modeling Arctic ice melt ponds.

MIQE précis: Practical implementation of minimum standard guidelines for fluorescence-based quantitative real-time PCR experiments

NARCIS (Netherlands)

Bustin, S.A.; Beaulieu, J.F.; Huggett, J.; Jaggi, R.; Kibenge, F.S.; Olsvik, P.A.; Penning, L.C.; Toegel, S.

2010-01-01

MIQE précis: Practical implementation of minimum standard guidelines for fluorescence-based quantitative real-time PCR experiments Stephen A Bustin1 , Jean-François Beaulieu2 , Jim Huggett3 , Rolf Jaggi4 , Frederick SB Kibenge5 , Pål A Olsvik6 , Louis C Penning7 and Stefan Toegel8 1 Centre for

Bulletin of Materials Science | Indian Academy of Sciences

Indian Academy of Sciences (India)

Home; Journals; Bulletin of Materials Science; Volume 39; Issue 3. Structural investigation of V 2 O 5 –P 2 O 5 –K 2 O glass system with antibacterial potential. N S VEDEANU I B COZAR R STANESCU R STEFAN D VODNAR O COZAR. Volume 39 Issue 3 June 2016 pp 697-702 ...

Browse Author Index

African Journals Online (AJOL)

Items 1 - 35 of 35 ... Emmelin, Maria · Endale, A · Endeshaw, T · Endeshaw, T · Endeshaw, Tekola · Engers, H · Engida, Endale · Engidawork, Ephrem · Enqueselassie, F · Enqueselassie, F · Enquoselassie, Fikre · Enquselassie, F · Enquselassie, Fikre · Ergete, W · Ergete, Wondwossen · Ergete, Wondwossen · Erisksson, Stefan

On the radiological consequences near and far away from the catastrophically damaged Chernobyl Nuclear Power Plant

Energy Technology Data Exchange (ETDEWEB)

Susnik, J [Reactor Engineering Div., Inst. Jozef Stefan, Ljubljana (Slovenia)

1992-07-01

The influence of the radioactive cloud rise at the site on the potential expected post accidental doses, using the WASH-1400 PWR-1A scenario and the CRAC 2 model, was studied. The UNSCEAR 1988 was used to estimate the activity of the cloud that contaminated Slovenia and neighbouring areas. The contamination levels at the J.Stefan Institute were used for comparison (the match was surprisingly good). Some of the expected doses due to early irradiation from the cloud, ground, inhalation and ingestion are also shown. Dose reduction possibilities were estimated. (author) [Slovenian] Preucili smo vpliv dviga radioaktivnega oblaka na lokaciji JE na potencialne ponezgodne doze, pri cemer smo izhajali iz WASH-1400 PWR-1A scenarija in uporabili program CRAC2. UNSCEAR 1988 smo uporabili za oceno aktivnosti oblaka, ki je onesnazil Slovenijo in sosednja podrocja. Nivoje kontaminacije izmerjene na lokaciji Instituta J. Stefan smo uporabili za primerjavo (ujemanje je bilo presenetljivo dobro). Podajamo tudi nekatere pricakovane doze zgodnjega obsevanja iz oblaka, s tal, vdihovanja in vnosa hrane. Ocenili smo mozna znizanja doz. [author].

PEG 400-Based Phase Change Materials Nano-Enhanced with Functionalized Graphene Nanoplatelets

Directory of Open Access Journals (Sweden)

Marco A. Marcos

2017-12-01

Full Text Available This study presents new Nano-enhanced Phase Change Materials, NePCMs, formulated as dispersions of functionalized graphene nanoplatelets in a poly(ethylene glycol with a mass-average molecular mass of 400 g·mol−1 for possible use in Thermal Energy Storage. Morphology, functionalization, purity, molecular mass and thermal stability of the graphene nanomaterial and/or the poly(ethylene glycol were characterized. Design parameters of NePCMs were defined on the basis of a temporal stability study of nanoplatelet dispersions using dynamic light scattering. Influence of graphene loading on solid-liquid phase change transition temperature, latent heat of fusion, isobaric heat capacity, thermal conductivity, density, isobaric thermal expansivity, thermal diffusivity and dynamic viscosity were also investigated for designed dispersions. Graphene nanoplatelet loading leads to thermal conductivity enhancements up to 23% while the crystallization temperature reduces up to in 4 K. Finally, the heat storage capacities of base fluid and new designed NePCMs were examined by means of the thermophysical properties through Stefan and Rayleigh numbers. Functionalized graphene nanoplatelets leads to a slight increase in the Stefan number.

Droplet size effects on film drainage between droplet and substrate.

Science.gov (United States)

Steinhaus, Benjamin; Spicer, Patrick T; Shen, Amy Q

2006-06-06

When a droplet approaches a solid surface, the thin liquid film between the droplet and the surface drains until an instability forms and then ruptures. In this study, we utilize microfluidics to investigate the effects of film thickness on the time to film rupture for water droplets in a flowing continuous phase of silicone oil deposited on solid poly(dimethylsiloxane) (PDMS) surfaces. The water droplets ranged in size from millimeters to micrometers, resulting in estimated values of the film thickness at rupture ranging from 600 nm down to 6 nm. The Stefan-Reynolds equation is used to model film drainage beneath both millimeter- and micrometer-scale droplets. For millimeter-scale droplets, the experimental and analytical film rupture times agree well, whereas large differences are observed for micrometer-scale droplets. We speculate that the differences in the micrometer-scale data result from the increases in the local thin film viscosity due to confinement-induced molecular structure changes in the silicone oil. A modified Stefan-Reynolds equation is used to account for the increased thin film viscosity of the micrometer-scale droplet drainage case.

Entropy density of an adiabatic relativistic Bose-Einstein condensate star

Energy Technology Data Exchange (ETDEWEB)

Khaidir, Ahmad Firdaus; Kassim, Hasan Abu; Yusof, Norhasliza [Theoretical Physics Lab., Department of Physics, Faculty of Science Building, University of Malaya, 50603 Kuala Lumpur (Malaysia)

2015-04-24

Inspired by recent works, we investigate how the thermodynamics parameters (entropy, temperature, number density, energy density, etc) of Bose-Einstein Condensate star scale with the structure of the star. Below the critical temperature in which the condensation starts to occur, we study how the entropy behaves with varying temperature till it reaches its own stability against gravitational collapse and singularity. Compared to photon gases (pressure is described by radiation) where the chemical potential, μ is zero, entropy of photon gases obeys the Stefan-Boltzmann Law for a small values of T while forming a spiral structure for a large values of T due to general relativity. The entropy density of Bose-Einstein Condensate is obtained following the similar sequence but limited under critical temperature condition. We adopt the scalar field equation of state in Thomas-Fermi limit to study the characteristics of relativistic Bose-Einstein condensate under varying temperature and entropy. Finally, we obtain the entropy density proportional to (σT{sup 3}-3T) which obeys the Stefan-Boltzmann Law in ultra-relativistic condition.

Optimal Control of Thermo--Fluid Phenomena in Variable Domains

Science.gov (United States)

Volkov, Oleg; Protas, Bartosz

2008-11-01

This presentation concerns our continued research on adjoint--based optimization of viscous incompressible flows (the Navier--Stokes problem) coupled with heat conduction involving change of phase (the Stefan problem), and occurring in domains with variable boundaries. This problem is motivated by optimization of advanced welding techniques used in automotive manufacturing, where the goal is to determine an optimal heat input, so as to obtain a desired shape of the weld pool surface upon solidification. We argue that computation of sensitivities (gradients) in such free--boundary problems requires the use of the shape--differential calculus as a key ingredient. We also show that, with such tools available, the computational solution of the direct and inverse (optimization) problems can in fact be achieved in a similar manner and in a comparable computational time. Our presentation will address certain mathematical and computational aspects of the method. As an illustration we will consider the two--phase Stefan problem with contact point singularities where our approach allows us to obtain a thermodynamically consistent solution.

PEG 400-Based Phase Change Materials Nano-Enhanced with Functionalized Graphene Nanoplatelets.

Science.gov (United States)

Marcos, Marco A; Cabaleiro, David; Guimarey, María J G; Comuñas, María J P; Fedele, Laura; Fernández, Josefa; Lugo, Luis

2017-12-29

This study presents new Nano-enhanced Phase Change Materials, NePCMs, formulated as dispersions of functionalized graphene nanoplatelets in a poly(ethylene glycol) with a mass-average molecular mass of 400 g·mol -1 for possible use in Thermal Energy Storage. Morphology, functionalization, purity, molecular mass and thermal stability of the graphene nanomaterial and/or the poly(ethylene glycol) were characterized. Design parameters of NePCMs were defined on the basis of a temporal stability study of nanoplatelet dispersions using dynamic light scattering. Influence of graphene loading on solid-liquid phase change transition temperature, latent heat of fusion, isobaric heat capacity, thermal conductivity, density, isobaric thermal expansivity, thermal diffusivity and dynamic viscosity were also investigated for designed dispersions. Graphene nanoplatelet loading leads to thermal conductivity enhancements up to 23% while the crystallization temperature reduces up to in 4 K. Finally, the heat storage capacities of base fluid and new designed NePCMs were examined by means of the thermophysical properties through Stefan and Rayleigh numbers. Functionalized graphene nanoplatelets leads to a slight increase in the Stefan number.

WIMS Library updating

Energy Technology Data Exchange (ETDEWEB)

Ravnik, M; Trkov, A [Inst. Jozef Stefan, Ljubljana (Slovenia); Holubar, A [Ustav Jaderneho Vyzkumu CSKAE, Rez (Serbia and Montenegro)

1992-07-01

At the end of 1990 the WIMS Library Update Project (WLUP) has been initiated at the International Atomic Energy Agency. The project was organized as an international research project, coordinated at the J. Stefan Institute. Up to now, 22 laboratories from 19 countries joined the project. Phase 1 of the project, which included WIMS input optimization for five experimental benchmark lattices, has been completed. The work presented in this paper describes also the results of Phase 2 of the Project, in which the cross sections based on ENDF/B-IV evaluated nuclear data library have been processed. (author) [Slovenian] Konec 1990 se je na Mednarodni agenciji za atomsko energijo zacel projekt obnove knjiznice presekov programa WIMS (WIMS Library Updating Project, WLUP). V projektu sodeluje 22 laboratorijev iz 19 drzav, koordiniramo pa ga na Institutu Jozef Stefan. Doslej je koncana faza 1 tega projekta, ki obsega optimizacijo vhodnega modela programa WIMS za pet eksperimentalnih testnih problemov. Podani so tudi rezultati faze 2, v kateri so se procesirali preseki na osnovi ENDF/B-IV datoteke. (author)

Investigations on a brass armour: Authentic or forgery?

International Nuclear Information System (INIS)

Martini, C.; Chiavari, C.; Ospitali, F.; Grazzi, F.; Scherillo, A.; Soffritti, C.; Garagnani, G.L.

2013-01-01

A copper-based armour, supposedly excavated in Eastern Georgia and tentatively dated to the I–II century AD, was investigated with the aim of checking its authenticity. The finding consisted of several pieces, mostly in a good state of conservation: helmet, lorica musculata (i.e. muscled cuirass), forearm guards, pterygies (covering the lower body and thighs), shin greaves and a spear tip. The combination of conventional metallography with in situ and non-destructive investigations (including Time of Flight Neutron Diffraction (ToF-ND)) on the front of the lorica, on one of the pterygies and on the spear tip showed that the composition and microstructure of the armour was not fully homogeneous. However, the results from the muscled cuirass are fairly coherent and raise suspicion about the authenticity of the piece, namely because of the (i) presence of metallic Al in the alloy, in solid solution with Cu, (ii) prevalence of an as-cast microstructure, which lead to a heavy weight as well to the need for a high amount of metal by comparison to hammered sheet and (iii) presence of an artificial patina, combined with earthy deposits which are not explainable if the original patina was removed before artificial patination for aesthetical reasons. - Highlights: • Cu-based armour from Eastern Georgia (I–II century AD?): check authenticity. • Conventional metallography combined with in situ and non-destructive investigations (ToF-ND). • Suspicious points: Al in the alloy, as-cast microstructure, artificial patina

Investigations on a brass armour: Authentic or forgery?

Energy Technology Data Exchange (ETDEWEB)

Martini, C., E-mail: carla.martini@unibo.it [Department of Industrial Engineering (DIN), University of Bologna, Via Risorgimento 4, 40136 Bologna (Italy); Chiavari, C., E-mail: cristina.chiavari@unibo.it [C.I.R.I. M.A.M (Advanced Applications in Mechanical Engineering and Materials Technology Interdepartmental Centre for Industrial Research), University of Bologna, Via Risorgimento 2, 40136 Bologna (Italy); Ospitali, F., E-mail: francesca.ospitali@unibo.it [Department of Industrial Chemistry “Toso Montanari”, University of Bologna, Viale Risorgimento 4, 40136 Bologna (Italy); Grazzi, F., E-mail: francesco.grazzi@fi.isc.cnr.it [Consiglio Nazionale delle Ricerche, Istituto dei Sistemi Complessi, Via Madonna del Piano 10, 50019 Sesto Fiorentino, FI (Italy); Scherillo, A., E-mail: antonella.scherillo@stfc.ac.uk [Consiglio Nazionale delle Ricerche, Istituto dei Sistemi Complessi, Via Madonna del Piano 10, 50019 Sesto Fiorentino, FI (Italy); Science and Technology Facility Council, ISIS Neutron Source, OX0QJ Didcot (United Kingdom); Soffritti, C., E-mail: chiara.soffritti@unife.it [TekneHub, Department of Architecture, University of Ferrara, Via Quartieri 8, 44122 Ferrara (Italy); Department of Engineering, University of Ferrara, Via Saragat 1, 44122 Ferrara (Italy); Garagnani, G.L., E-mail: gian.luca.garagnani@unife.it [Department of Engineering, University of Ferrara, Via Saragat 1, 44122 Ferrara (Italy)

2013-10-01

A copper-based armour, supposedly excavated in Eastern Georgia and tentatively dated to the I–II century AD, was investigated with the aim of checking its authenticity. The finding consisted of several pieces, mostly in a good state of conservation: helmet, lorica musculata (i.e. muscled cuirass), forearm guards, pterygies (covering the lower body and thighs), shin greaves and a spear tip. The combination of conventional metallography with in situ and non-destructive investigations (including Time of Flight Neutron Diffraction (ToF-ND)) on the front of the lorica, on one of the pterygies and on the spear tip showed that the composition and microstructure of the armour was not fully homogeneous. However, the results from the muscled cuirass are fairly coherent and raise suspicion about the authenticity of the piece, namely because of the (i) presence of metallic Al in the alloy, in solid solution with Cu, (ii) prevalence of an as-cast microstructure, which lead to a heavy weight as well to the need for a high amount of metal by comparison to hammered sheet and (iii) presence of an artificial patina, combined with earthy deposits which are not explainable if the original patina was removed before artificial patination for aesthetical reasons. - Highlights: • Cu-based armour from Eastern Georgia (I–II century AD?): check authenticity. • Conventional metallography combined with in situ and non-destructive investigations (ToF-ND). • Suspicious points: Al in the alloy, as-cast microstructure, artificial patina.

Elemental fractionation in 785 nm picosecond and femtosecond laser ablation inductively coupled plasma mass spectrometry

International Nuclear Information System (INIS)

Shaheen, M.E.; Gagnon, J.E.; Fryer, B.J.

2015-01-01

Elemental fractionation and ICP-MS signal response were investigated for two different pulse width laser beams originating from the same laser system. Femtosecond and picosecond laser beams at pulse widths of 130 fs and 110 ps, respectively, and wavelength of 785 nm were used to ablate NIST 610 synthetic glass and SRM 1107 Naval Brass B at the same spot for 800 to 1000 laser pulses at different repetition rates (5 to 50 Hz). Elemental fractionation was found to depend on repetition rate and showed a trend with femtosecond laser ablation that is opposite to that observed in picosecond laser ablation for most measured isotopes. ICP-MS signal intensity was higher in femtosecond than picosecond LA-ICP-MS in both NIST 610 and naval brass when ablation was conducted under the same fluence and repetition rate. The differences in signal intensity were partly related to differences in particle size distribution between particles generated by femtosecond and picosecond laser pulses and the consequent differences in transport and ionization efficiencies. The main reason for the higher signal intensity resulting from femtosecond laser pulses was related to the larger crater sizes compared to those created during picosecond laser ablation. Elemental ratios measured using 66 Zn/ 63 Cu, 208 Pb/ 238 U, 232 Th/ 238 U, 66 Zn/ 232 Th and 66 Zn/ 208 Pb were found to change with the number of laser pulses with data points being more scattered in picosecond than femtosecond laser pulses. Reproducibility of replicate measurements of signal intensities, fractionation and elemental ratios was better for fs-LA-ICP-MS (RSD ~ 3 to 6%) than ps-LA-ICP-MS (RSD ~ 7 to 11%). - Highlights: • Fractionation and ICP-MS signal response were investigated for two different pulse widths using NIST 610 and Naval Brass. • Dependence of fractionation indices on repetition rate and pulse width. • Higher ablation rate was observed in picosecond compared to femtosecond laser ablation of NIST 610 and Brass

OAI-PMH repositories : quality issues regarding metadata and protocol compliance, tutorial 1

CERN Multimedia

CERN. Geneva; Cole, Tim

2005-01-01

This tutorial will provide an overview of emerging guidelines and best practices for OAI data providers and how they relate to expectations and needs of service providers. The audience should already be familiar with OAI protocol basics and have at least some experience with either data provider or service provider implementations. The speakers will present both protocol compliance best practices and general recommendations for creating and disseminating high-quality "shareable metadata". Protocol best practices discussion will include coverage of OAI identifiers, date-stamps, deleted records, sets, resumption tokens, about containers, branding, errors conditions, HTTP server issues, and repository lifecycle issues. Discussion of what makes for good, shareable metadata will cover topics including character encoding, namespace and XML schema issues, metadata crosswalk issues, support of multiple metadata formats, general metadata authoring recommendations, specific recommendations for use of Dublin Core elemen...

Efficient low static-volume water heater

Science.gov (United States)

Brown, R. L.

1976-01-01

Calrod heating element is surrounded by matrix of fused sintered copper or brass balls, and assembly is then installed in piping of water system. As water flows through matrix, sintered balls cause turbulent flow and heating. Applications include laundromats, laboratories, and photographic labs.

Effects of carbon fibres on the life cycle assessment of additively manufactured injection moulding inserts for rapid prototyping

DEFF Research Database (Denmark)

Hofstätter, Thomas; Bey, Niki; Mischkot, Michael

2017-01-01

properties and lifetime. The additively manufactured inserts are compared to the standard materials steel, aluminium and brass. The investigated part of the production and prototyping phase considers the insert itself, the moulded part, and resulting waste material of the injection moulding process....

Corrosion of metals and alloys in the coastal and deep waters of the Arabian Sea and the Bay of Bengal

Digital Repository Service at National Institute of Oceanography (India)

Sawant, S.S.; Venkat, K.; Wagh, A.B.

Corrosion rate of mild steel (MS), stainless steel (SS), copper, brass and cupro-nickel has been determinEd. by exposing metallic coupons in coastal and oceanic waters of the Arabian Sea and Bay of Bengal. Amongst the metals and alloys under study...

76 FR 27005 - Polyethylene Terephthalate Film, Sheet, and Strip From the Republic of Korea: Initiation and...

Science.gov (United States)

2011-05-10

... typically examines several factors including, but not limited to: (1) Management; (2) production facilities; (3) supplier relationships; and (4) customer base. See Brass Sheet and Strip from Canada: Final... Saehan to TAMK resulted in little or no change in management, production facilities, supplier...

Effects of loading variables on fatigue-crack growth in liquid-metal environments

CSIR Research Space (South Africa)

Fernandes, PJL

1995-10-01

Full Text Available Liquid-metal-induced embrittlement (LMIE) refers to the loss of ductility in normally ductile metals and alloys when stressed while in contact with a liquid metal. In this study, the fatigue crack growth behaviour of brass in molten gallium...

Russian orchestral works. Torgny Sporsen / Ivan March

Index Scriptorium Estoniae

March, Ivan

1991-01-01

Uuest heliplaadist "Russian orchestral works. Torgny Sporsen (bass). Gothenburg Symphony Brass Band. Gothenburg Symphony Chorus and Orchestra / Neeme Järvi" D6 MC 429 984 - 4 GH; CD 429 984 - 26H (76 minutes). Borodin: In Central Asia. Prince Igor - Polovtsian Dances

Download this PDF file

African Journals Online (AJOL)

User

Mathematics and Statistics, Federal Polytechnic, Idah, Kogi State, Nigeria. ce Laboratory Technology, College of Education Technical Brass, Bayelsa State rtment of Microbiology, Kaduna State University, Kaduna State. Corresponding author. E-mail: ocholiahmed@yahoo.com primary school children between the ages of ...

76 FR 45511 - Stainless Steel Plate in Coils From Belgium: Notice of Initiation of Antidumping Duty Changed...

Science.gov (United States)

2011-07-29

..., but not limited to: (1) Management; (2) production facilities; (3) supplier relationships; and (4) customer base. See Brass Sheet and Strip from Canada: Final Results of Antidumping Duty Administrative... example, Aperam provided statements regarding its material and service providers and its customer base...

Psychic Warfare: Exploring the Mind Frontier

Science.gov (United States)

1988-05-01

month later Anderson was bacrk reinforcing psychic skepticism. This time he began, "The brass hats are, indeed, dabbling in the dark arts." Other...Emotion Radiator Ray; (10) Antisubmarine Systems; (11) Teleporters (Prototype); (12) Force Generators: (13) Orthoframe Generators; (14) Quark /Antiquark

Hämmastavad esikteosed / Aita Kivi

Index Scriptorium Estoniae

Kivi, Aita, 1954-

2002-01-01

Sisu : Andrew Miller. Salakaval valu; Helen Dewitt. Viimane samurai; Michel Faber. Naha all; Ana̐s Nin. Venuse delta; Eeva Park. Vaba langemine; Henri Troyat. Kohutavad keisrinnad; 11. september : terrorirünnaku tagamaad : / [koost. Stefan Aust, Cordt Schnibben... jt.]; Deepak Chopra. Täiuslik tervis; Charlie Jones. Elu on võrratu; Matt Ridley, Matt. Vooruse lätted

Bagatellid : maailm / Nele-Eva Steinfeld, Harry Liivrand, Ivo Heinloo

Index Scriptorium Estoniae

Steinfeld, Nele-Eva

2010-01-01

Uudiseid maailmast: Helilooja Jennifer Higdon pälvis Pulitzeri preemia. Fabio Luisist sai Metropolitan Opera esimene külalisdirigent. "Operalia" võitjad Sonya Yoncheva ja Stefan Pop. Lahkus metsosopran Giulietta Simionato. Kaija Saariaho uus ooper "Emilie" Amsterdamis. Hollandi maineka jazziauhinna noppis Anton Goudsmit. Herbie Hancock tähisats juubelit. Jagati reggae- ja maailmamuusika auhindu. Ilmus Stevie Wonderi biograafia

Directory of Czechoslovak Officials; a Reference Aid

Science.gov (United States)

1988-07-14

Jaroslav; KSS Barilla , Jan KSS Horvath, Stefan: A’SS Bartak, Stel’an KSS Horvathova, Marta: KSC Barton, Jaroslav Hricko, Peter: KSS Benyo, Matus: KSS...61 Bilek. Jin 78 Banarova. Eva is Bilek, /denck 4’) Barak, Ladislav 71 Biro~s, Branislav 10.40.41, Barilla , Jan .11 Bisko. fir,, Harlot’s, Paulina 6

Interview: Sued-Chemie innovates to maintain its leadership; Interview Sued-Chemie: innover pour conserver son leadership

Energy Technology Data Exchange (ETDEWEB)

Anon.

2000-01-01

The Sued-Chemie group, the head office of which is based in Munich, is one of the world's leading producers of catalysts for the 'syngas' gas chemistry, the refining and the petrochemical industry. Questioned by Info Chimie Magazine, Stefan Brejc, the Product Manager for 'syngas' catalysts, reviews the products in the range. (authors)

Arhitektuuriuudised / Karen Jagodin

Index Scriptorium Estoniae

Jagodin, Karen, 1982-

2007-01-01

Trossidega majale kinnitatud rippuv tuba (autor Stefan Eberstadt); disainikooli hoone Saksamaa tööstuspiirkonnas (arhitektid Kazuyo Sejima ja Ryue Nishizawa); hiidlille kujuline elamu Hollandis (arhitektid Ben Huygen ja Jasper Jägers); Fuji mäe kujuline eramu Jaapanis (arhitekt Yuko Nagayama); AR Arhitektuuriauhinnad noorele arhitektile; laeva ja püramiidi hübriidi vormiga elamu (arhitekt Katsuhiro Miyamoto)

Arhitektuuriuudised / Karen Jagodin

Index Scriptorium Estoniae

Jagodin, Karen, 1982-

2006-01-01

Richard Rogersi Madridi lennujaam, prantsuse arhitektide odavad mudelmajad, jaapani arhitektide lükandseintega eramu nn. räästamaja, Saksamaal korraldatud multifunktsionaalsete ühiselamu/hostelitubade arhitektuurikonkursi tulemustest, arhitekt Carme Pinose kontorihoone Torre Cube Mehhikos, Sean Godselli projekteeritud eramu Austraalias, arhitektuuribüroo Alphaville projekteeritud eramu Jaapanis, Stefan Hauseri (kunstnikunimega Placed To Ride) projekteeritud Malmö rulapark