Dynamics of the π-p→π0π0n reaction for pπ-<750 MeV/c

International Nuclear Information System (INIS)

Craig, K.; Comfort, J.R.; Ramirez, A.F.; Allgower, C.E.; Spinka, H.; Bekrenev, V.; Koulbardis, A.; Kozlenko, N.; Kruglov, S.; Lopatin, I.; Berger, E.; Clajus, M.; McDonald, S.; Nefkens, B.M.K.; Phaisangittisakul, N.; Prakhov, S.; Price, J.W.; Pulver, M.; Tippens, W.B.; Briscoe, W.J.

2003-01-01

Data are presented for the reaction π - p→π 0 π 0 n in the range from threshold to p π - =750 MeV/c. The systematics of the data and multipole analyses are examined for sensitivity to a f 0 (600) (''σ'') meson. A one-pion-exchange mechanism is found to be very weak, or absent. The reaction appears to become dominated by sequential π 0 decays through the Δ(1232) resonance as the beam momentum increases, along with substantial interference effects from several competing mechanisms

48 CFR 750.7106-2 - Amendments without consideration.

Science.gov (United States)

2010-10-01

... consideration. 750.7106-2 Section 750.7106-2 Federal Acquisition Regulations System AGENCY FOR INTERNATIONAL... Foreign Policy Interests of the United States 750.7106-2 Amendments without consideration. (a) Where an... of performance, considerations of fairness may make appropriate some adjustment in the contract. ...

32 CFR 750.9 - Claims: Payments.

Science.gov (United States)

2010-07-01

... requires submission of the payment voucher to the General Accounting Office. All other field authorized payment vouchers are submitted directly to the servicing disbursing office for payment. ... 32 National Defense 5 2010-07-01 2010-07-01 false Claims: Payments. 750.9 Section 750.9 National...

23 CFR 750.708 - Acceptance of state zoning.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Acceptance of state zoning. 750.708 Section 750.708... BEAUTIFICATION Outdoor Advertising Control § 750.708 Acceptance of state zoning. (a) 23 U.S.C. 131(d) provide... within areas . . . which are zoned industrial or commercial under authority of State law.” Section 131(d...

Oxidación en vapor de agua a 700 ºC y 750 ºC del acero inoxidable AISI 317 recubierto con aluminio por CVD-FBR.

Directory of Open Access Journals (Sweden)

Jose L. Marulanda

2014-01-01

Full Text Available Se realizó la oxidación del acero inoxidable austenítico AISI 317 recubierto con aluminio por deposición química de vapor en lecho fluidizado, a temperaturas de 700 °C y 750ºC, en un ambiente con 100% vapor de agua, para evaluar su comportamiento. Se realizaron curvas de ganancia de masa y las películas de óxidos se analizaron por medio de SEM y difracción de rayos X, para observar la morfología de los óxidos. Se realizó la simulación termodinámica del proceso de oxidación en vapor de agua de los substratos para conocer las posibles fases sólidas y gaseosas que se podrían formar, en presencia de una ambiente con 100% vapor de agua y una atmosfera de presión. La forma de ataque a 750 ºC es similar a 700 ºC, aunque la velocidad de oxidación es mayor, ya que la difusión de los elementos de aleación y las reacciones de oxidación son más rápidas. Los recubrimientos de aluminio tienen una buena resistencia a la oxidación en vapor de agua, ya que forman una capa superficial de Al 2 O 3 , que es compacta y adherente, la cual protege al substrato del ataque corrosivo.

Advances in 750 nm VECSELs (Conference Presentation)

Science.gov (United States)

Saarinen, Esa J.; Ranta, Sanna; Lyytikäinen, Jari; Saarela, Antti; Sirbu, Alexei; Iakovlev, Vladimir; Kapon, Eli; Guina, Mircea

2017-03-01

Lasers operating in the transmission window of tissue at wavelengths between 700 and 800 nm are needed in numerous medical and biomedical applications, including photodynamic therapy and fluorescence microscopy. However, the performance of diode lasers in this spectral range is limited by the lack of appropriate compound semiconductors. Here, we review our recent research on 750 nm VECSELs. Two approaches to reaching the 750 nm wavelength will be discussed. The first approach relies on intra-cavity frequency doubling a wafer-fused 1500 nm VECSEL. The VECSEL gain chip comprises a GaAs-based DBR and an InP-based gain section, which allows for optical pumping with low-cost commercial diodes at 980 nm. With this scheme we have achieved watt-level output powers and tuning of the laser wavelength over a 40 nm band at around 750 nm. The second approach is direct emission at 750 nm using the AlGaAs/GaAs material system. In this approach visible wavelengths are required for optical pumping. However, the consequent higher costs compared to pumping at 980 nm are mitigated by the more compact laser setup and prospects of doubling the frequency to the ultraviolet range.

Irradiation-induced microstructural changes in alloy X-750

International Nuclear Information System (INIS)

Kenik, E.A.

1997-01-01

Alloy X-750 is a nickel base alloy that is often used in nuclear power systems for it's excellent corrosion resistance and mechanical properties. The present study examines the microstructure and composition profiles in a heat of Alloy X-750 before and after neutron irradiation

Characterising the 750 GeV diphoton excess

International Nuclear Information System (INIS)

Bernon, Jérémy; Goudelis, Andreas; Kraml, Sabine; Mawatari, Kentarou; Sengupta, Dipan

2016-01-01

We study kinematic distributions that may help characterise the recently observed excess in diphoton events at 750 GeV at the LHC Run 2. Several scenarios are considered, including spin-0 and spin-2 750 GeV resonances that decay directly into photon pairs as well as heavier parent resonances that undergo three-body or cascade decays. We find that combinations of the distributions of the diphoton system and the leading photon can distinguish the topology and mass spectra of the different scenarios, while patterns of QCD radiation can help differentiate the production mechanisms. Moreover, missing energy is a powerful discriminator for the heavy parent scenarios if they involve (effectively) invisible particles. While our study concentrates on the current excess at 750 GeV, the analysis is general and can also be useful for characterising other potential diphoton signals in the future.

Effect of refining techniques on stress corrosion cracking behaviour of Inconel X-750

International Nuclear Information System (INIS)

Mishra, B.; Moore, J.J.

1988-01-01

High-strength age-hardenable nickel-base superalloy Inconel X-750, is susceptible to severe intergranular stress corrosion cracking (IGSCC) when used in the triple heat-treated condition. In this research, the slow strain-rate technique has been employed to evaluate the stress corrosion cracking susceptibility of alloy X-750 under simulated nuclear pressurized water reactor (PWR) conditions, using an automated autoclave system at 8 x 10 6 N m -2 pressure and 289 0 C temperature. The alloys produced via electroslag refining (ESR) or vacuum arc refining (VAR) processing routes containing 0.004% and 0.011% sulphur, respectively, were solution annealed at either 1075 or 1240 0 C for 2 h and water quenched followed by ageing in the 704 to 871 0 C temperature range for up to 200 h, followed by air cooling or furnace cooling. The scanning electron microscopy performed on fractured surfaces revealed that Inconel X-750 processed through the ESR route, solution annealed at 1240 0 C for 2 h and water quenched, aged at 871 0 C for 200 h and furnace cooled provided the best combination of strength, ductility and resistance to SCC. A less sensitized area adjacent to the grain boundary was responsible for the improvement in properties and the alloy X-750 is recommended for PWR applications in the above conditions of processing and heat treatment. (author)

21 CFR 573.750 - Pichia pastoris dried yeast.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Pichia pastoris dried yeast. 573.750 Section 573... Food Additive Listing § 573.750 Pichia pastoris dried yeast. (a) Identity. The food additive Pichia pastoris dried yeast may be used in feed formulations of broiler chickens as a source of protein not to...

Oxidación en vapor de agua a 700 ºC y 750 ºC del acero inoxidable AISI 317 recubierto con aluminio por CVD-FBR.

OpenAIRE

Jose L. Marulanda; Saul I. Castañeda; Aduljay Remolina

2014-01-01

Se realizó la oxidación del acero inoxidable austenítico AISI 317 recubierto con aluminio por deposición química de vapor en lecho fluidizado, a temperaturas de 700 °C y 750ºC, en un ambiente con 100% vapor de agua, para evaluar su comportamiento. Se realizaron curvas de ganancia de masa y las películas de óxidos se analizaron por medio de SEM y difracción de rayos X, para observar la morfología de los óxidos. Se realizó la simulación termodinámica del proceso de oxidación en vapor de agua de...

Efficient Techniques for Formal Verification of PowerPC 750 Executables, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — We will develop an efficient tool for formal verification of PowerPC 750 executables. The PowerPC 750 architecture is used in the radiation-hardened RAD750...

48 CFR 750.7105 - Approving authorities.

Science.gov (United States)

2010-10-01

... CONTRACT MANAGEMENT EXTRAORDINARY CONTRACTUAL ACTIONS Extraordinary Contractual Actions To Protect Foreign Policy Interests of the United States 750.7105 Approving authorities. All authority to approve actions...

23 CFR 750.703 - Definitions.

Science.gov (United States)

2010-04-01

... Outdoor Advertising Control § 750.703 Definitions. The terms as used in this subpart are defined as... categorized as commercial, industrial, business, manufacturing, highway service or highway business (when these latter are intended for highway-oriented business), retail, trade, warehouse, and similar...

48 CFR 750.7103 - Definitions.

Science.gov (United States)

2010-10-01

... MANAGEMENT EXTRAORDINARY CONTRACTUAL ACTIONS Extraordinary Contractual Actions To Protect Foreign Policy Interests of the United States 750.7103 Definitions. (a) The term approving authority as used in this...) as amended, unless otherwise stated. (c) The term the Act shall mean the Foreign Assistance Act of...

48 CFR 750.7108 - Contractual requirements.

Science.gov (United States)

2010-10-01

... CONTRACT MANAGEMENT EXTRAORDINARY CONTRACTUAL ACTIONS Extraordinary Contractual Actions To Protect Foreign Policy Interests of the United States 750.7108 Contractual requirements. Every contract amended or... policy interests of the United States. ...

Measurement of π-p→π0π0n from threshold to pπ-=750 MeV/c

International Nuclear Information System (INIS)

Prakhov, S.; Nefkens, B.M.K.; Clajus, M.; Marusic, A.; McDonald, S.; Phaisangittisakul, N.; Price, J.W.; Starostin, A.; Tippens, W.B.; Allgower, C.E.; Spinka, H.; Bekrenev, V.; Koulbardis, A.; Kozlenko, N.; Kruglov, S.; Lopatin, I.; Briscoe, W.J.; Shafi, A.; Comfort, J.R.; Craig, K.

2004-01-01

Reaction π - p→π 0 π 0 n has been measured with high statistics in the beam momentum range 270-750 MeV/c. The data were obtained using the Crystal Ball multiphoton spectrometer, which has 93% of 4π solid angle coverage. The dynamics of the π - p→π 0 π 0 n reaction and the dependence on the beam energy are displayed in total cross sections, Dalitz plots, invariant-mass spectra, and production angular distributions. Special attention is paid to the evaluation of the acceptance that is needed for the precision determination of the total cross section σ t (π - p→π 0 π 0 n). The energy dependence of σ t (π - p→π 0 π 0 n) shows a shoulder at the Roper resonance [i.e., the N(1440)(1/2) + ], and there is also a maximum near the N(1520)(3/2) - . It illustrates the importance of these two resonances to the π 0 π 0 production process. The Dalitz plots are highly nonuniform; they indicate that the π 0 π 0 n final state is dominantly produced via the π 0 Δ 0 (1232) intermediate state. The invariant-mass spectra differ much from the phase-space distributions. The production angular distributions are also different from the isotropic distribution, and their structure depends on the beam energy. For beam momenta above 550 MeV/c, the density distribution in the Dalitz plots strongly depends on the angle of the outgoing dipion system (or equivalently on the neutron angle). The role of the f 0 (600) meson (also known as the σ) in π 0 π 0 n production remains controversial

27 CFR 7.50 - Application.

Science.gov (United States)

2010-04-01

... THE TREASURY LIQUORS LABELING AND ADVERTISING OF MALT BEVERAGES Advertising of Malt Beverages § 7.50... radio or television broadcast, or in any newspaper, periodical, or any publication, by any sign or... such advertising is in, or is calculated to induce sales in, interstate or foreign commerce, or is...

750 GeV diphoton resonance and electric dipole moments

Directory of Open Access Journals (Sweden)

Kiwoon Choi

2016-09-01

Full Text Available We examine the implication of the recently observed 750 GeV diphoton excess for the electric dipole moments of the neutron and electron. If the excess is due to a spin zero resonance which couples to photons and gluons through the loops of massive vector-like fermions, the resulting neutron electric dipole moment can be comparable to the present experimental bound if the CP-violating angle α in the underlying new physics is of O(10−1. An electron EDM comparable to the present bound can be achieved through a mixing between the 750 GeV resonance and the Standard Model Higgs boson, if the mixing angle itself for an approximately pseudoscalar resonance, or the mixing angle times the CP-violating angle α for an approximately scalar resonance, is of O(10−3. For the case that the 750 GeV resonance corresponds to a composite pseudo-Nambu–Goldstone boson formed by a QCD-like hypercolor dynamics confining at ΛHC, the resulting neutron EDM can be estimated with α∼(750 GeV/ΛHC2θHC, where θHC is the hypercolor vacuum angle.

7 CFR 782.12 - Filing FSA-750, End-Use Certificate for Wheat.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false Filing FSA-750, End-Use Certificate for Wheat. 782.12... Certificate Program § 782.12 Filing FSA-750, End-Use Certificate for Wheat. (a) Each entity that imports wheat originating in Canada shall, for each entry into the U.S., obtain form FSA-750, End-Use Certificate for Wheat...

48 CFR 750.7109-1 - Filing requests.

Science.gov (United States)

2010-10-01

... CONTRACT MANAGEMENT EXTRAORDINARY CONTRACTUAL ACTIONS Extraordinary Contractual Actions To Protect Foreign Policy Interests of the United States 750.7109-1 Filing requests. Any person (hereinafter called the...

30 CFR 750.14 - Lands designated unsuitable for mining by Act of Congress.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Lands designated unsuitable for mining by Act of Congress. 750.14 Section 750.14 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND... RECLAMATION OPERATIONS ON INDIAN LANDS § 750.14 Lands designated unsuitable for mining by Act of Congress...

48 CFR 750.7100 - Scope of subpart.

Science.gov (United States)

2010-10-01

... MANAGEMENT EXTRAORDINARY CONTRACTUAL ACTIONS Extraordinary Contractual Actions To Protect Foreign Policy Interests of the United States 750.7100 Scope of subpart. This subpart sets forth the standards and the...

Adaptation of HAMMER computer code to CYBER 170/750 computer

International Nuclear Information System (INIS)

Pinheiro, A.M.B.S.; Nair, R.P.K.

1982-01-01

The adaptation of HAMMER computer code to CYBER 170/750 computer is presented. The HAMMER code calculates cell parameters by multigroup transport theory and reactor parameters by few group diffusion theory. The auxiliary programs, the carried out modifications and the use of HAMMER system adapted to CYBER 170/750 computer are described. (M.C.K.) [pt

48 CFR 750.7106-3 - Mistakes.

Science.gov (United States)

2010-10-01

... policy interests of the United States by expediting the procurement program and by giving contractors... MANAGEMENT EXTRAORDINARY CONTRACTUAL ACTIONS Extraordinary Contractual Actions To Protect Foreign Policy Interests of the United States 750.7106-3 Mistakes. A contract may be amended or modified to corrrect or...

Demonstration of SiC Pressure Sensors at 750 C

Science.gov (United States)

Okojie, Robert S.; Lukco, Dorothy; Nguyen, Vu; Savrun, Ender

2014-01-01

We report the first demonstration of MEMS-based 4H-SiC piezoresistive pressure sensors tested at 750 C and in the process confirmed the existence of strain sensitivity recovery with increasing temperature above 400 C, eventually achieving near or up to 100% of the room temperature values at 750 C. This strain sensitivity recovery phenomenon in 4H-SiC is uncharacteristic of the well-known monotonic decrease in strain sensitivity with increasing temperature in silicon piezoresistors. For the three sensors tested, the room temperature full-scale output (FSO) at 200 psig ranged between 29 and 36 mV. Although the FSO at 400 C dropped by about 60%, full recovery was achieved at 750 C. This result will allow the operation of SiC pressure sensors at higher temperatures, thereby permitting deeper insertion into the engine combustion chamber to improve the accurate quantification of combustor dynamics.

48 CFR 750.7104 - Types of actions.

Science.gov (United States)

2010-10-01

... MANAGEMENT EXTRAORDINARY CONTRACTUAL ACTIONS Extraordinary Contractual Actions To Protect Foreign Policy Interests of the United States 750.7104 Types of actions. Three types of actions may be taken by or pursuant...

48 CFR 750.7106-1 - General.

Science.gov (United States)

2010-10-01

... the foreign policy interests of the United States is a matter of sound judgment to be made on the... MANAGEMENT EXTRAORDINARY CONTRACTUAL ACTIONS Extraordinary Contractual Actions To Protect Foreign Policy Interests of the United States 750.7106-1 General. The mere fact that losses occur under a Government...

Electrostatic analysis of 750 keV DC accelerator

International Nuclear Information System (INIS)

Kumar, Abhay; Dwivedi, Jishnu; Jana, Arup Ratan

2011-01-01

The indigenously developed 750 keV DC accelerator working at RRCAT for the last 5 years uses SF 6 at 6 bar pressure as the insulating gas. The green house potential of this gas is about 22,000 times more than that of CO 2 gas. An electrostatic analysis of this accelerator was performed in order to probe the necessity of using this gas with a very elaborate gas handling system. The DC accelerator is approximated by a 2-D axisymmetric model in ANSYS and voltages were defined at the individual stages of the accelerating tube. The result of the study shows that the present design needs SF 6 gas and the pressure vessel dimensions need to be modified to operate the DC accelerator with environmentally friendly N 2 -CO 2 mixture. This paper presents the methodology of the analysis, discusses the DC accelerator finite element model and presents the results of the analysis. The paper also proposes changes in the DC accelerator design to run the accelerator with N 2 -CO 2 mixture. (author)

Changes in soil water availability in vineyards can be traced by the carbon and nitrogen isotope composition of dried wines.

Science.gov (United States)

Spangenberg, Jorge E; Zufferey, Vivian

2018-04-13

The grapevine is one of the most important edible fruit plants cultivated worldwide, and it is highly sensitive to changes in the soil water content. We studied the total carbon and nitrogen contents and stable isotope compositions (C/N WSR , δ 13 C WSR and δ 15 N WSR values) of the solid residues obtained by freeze-drying wines produced from two white grapevine cultivars (Vitis vinifera L. cv Chasselas and Petite Arvine) field grown under different soil water regimes while maintaining other climatic and ecopedological conditions identical. These experiments simulated the more frequent and extended climate change-induced periods of soil water shortage. The wines were from the 2009-2014 vintages, produced using the same vinification procedure. The plant water status, reflecting soil water availability, was assessed by the predawn leaf water potential (Ψ pd ), monitored in the field during the growing seasons. For both wine varieties, the δ 13 C WSR values are highly correlated with Ψ pd values and record the soil water availability set by soil water holding capacity, rainfall and irrigation water supply. These relationships were the same as those observed for the carbon isotope composition of fruit sugars (i.e., must sugars) and plant water status. In Chasselas wines, the nitrogen content and δ 15 N WSR values decreased with soil water deficit, indicating control of the flux of soil-water soluble nutrients into plants by soil water availability. Such a correlation was not found for Petite Arvine, probably due to different N-metabolism processes in this genetically atypical cultivar. The results presented in this study confirm and generalize what was previously found for red wine (Pinot noir); the carbon isotope composition of wine solid residues is a reliable indicator of the soil and the plant water status and thus can be used to trace back local climatic conditions in the vineyard's region. In most wines (except Petite Arvine) the C/N WSR and δ 15 N WSR

48 CFR 750.7109-3 - Facts and evidence.

Science.gov (United States)

2010-10-01

... CONTRACT MANAGEMENT EXTRAORDINARY CONTRACTUAL ACTIONS Extraordinary Contractual Actions To Protect Foreign Policy Interests of the United States 750.7109-3 Facts and evidence. The contracting officer or the...

48 CFR 750.7106-4 - Informal commitments.

Science.gov (United States)

2010-10-01

... foreign policy interests of the United States by assuring persons that they will be treated fairly and... CONTRACT MANAGEMENT EXTRAORDINARY CONTRACTUAL ACTIONS Extraordinary Contractual Actions To Protect Foreign Policy Interests of the United States 750.7106-4 Informal commitments. Informal commitments may be...

Phenotype-gene: 750 [Arabidopsis Phenome Database[Archive

Lifescience Database Archive (English)

Full Text Available 750 http://metadb.riken.jp/db/SciNetS_ria224i/cria224u3ria224u926i abnormal for trait of behavior...4u15908594i abnormal for trait of behavioral quality in organ named root during p

Improved nickel plating of Inconel X-750

Science.gov (United States)

Farmer, M. E.; Feeney, J. E.; Kuster, C. A.

1969-01-01

Electroplating technique with acid pickling provides a method of applying nickel plating on Inconel X-750 tubing to serve as a wetting agent during brazing. Low-stress nickel-plating bath contains no organic wetting agents that cause the nickel to blister at high temperatures.

Measurement of π0Λ, K0n, and π0Σ0 production in K-p interactions for pK- between 514 and 750 MeV/c

International Nuclear Information System (INIS)

Prakhov, S.; Nefkens, B. M. K.; Marusic, A.; McDonald, S.; Phaisangittisakul, N.; Price, J. W.; Starostin, A.; Bekrenev, V.; Koulbardis, A.; Kozlenko, N.; Kruglov, S.; Lopatin, I.; Briscoe, W. J.; Shafi, A.; Strakovsky, I. I.; Knecht, N.; Lolos, G.; Papandreou, Z.; Peaslee, D.; Staudenmaier, H. M.

2009-01-01

Differential cross sections and hyperon polarizations have been measured for K 0 n, π 0 Λ, and π 0 Σ 0 production in K - p interactions at eight K - momenta between 514 and 750 MeV/c. The experiment detected the multiphoton final states with the Crystal Ball spectrometer using a K - beam from the BNL Alternating Gradient Synchrotron. The results provide significantly greater precision than the existing data, allowing a detailed reexamination of the excited hyperon states in our energy range.

New forces and the 750 GeV resonance

International Nuclear Information System (INIS)

Duerr, Michael; Fileviez Perez, Pavel; Smirnov, Juri

2016-04-01

Recently, the ATLAS and CMS collaborations have pointed out the possible existence of a new resonance with a mass around 750 GeV. We investigate the possibility to identify this new resonance with a spin zero field responsible for the breaking of a new gauge symmetry. We focus on a simple theory where the baryon number is a local symmetry spontaneously broken at the low scale. In this context new vector-like quarks are needed to cancel all baryonic anomalies and define the production mechanism and decays of the new Higgs at the LHC. Assuming the existence of the new Higgs with a mass of 750 GeV at the LHC we find an upper bound on the symmetry breaking scale. Therefore, one expects that a new force associated with baryon number could be discovered at the LHC.

Irradiation-assisted stress corrosion cracking of HTH Alloy X-750 and Alloy 625

International Nuclear Information System (INIS)

Bajaj, R.; Mills, W.J.; Lebo, M.R.; Hyatt, B.Z.; Burke, M.G.

1995-01-01

In-reactor testing of bolt-loaded compact tension specimens was performed in 360 C water. New data confirms previous results that high irradiation levels reduce SCC resistance in Alloy X-750. Low boron heats show improved IASCC (irradiation-assisted stress corrosion cracking). Alloy 625 is resistant to IASCC. Microstructural, microchemical, and deformation studies were carried out. Irradiation of X-750 caused significant strengthening and ductility loss associated with formation of cavities and dislocation loops. High irradiation did not cause segregation in X-750. Irradiation of 625 resulted in formation of small dislocation loops and a fine body-centered-orthorhombic phase. The strengthening due to loops and precipitates was apparently offset in 625 by partial dissolution of γ precipitates. Transmutation of boron to helium at grain boundaries, coupled with matrix strengthening, is believed to be responsible for IASCC in X-750, and the absence of these two effects results in superior IASCC resistance in 625

Irradiation assisted stress corrosion cracking of HTH Alloy X-750 and Alloy 625

International Nuclear Information System (INIS)

Mills, W.J.; Lebo, M.R.; Bajaj, R.; Kearns, J.J.; Hoffman, R.C.; Korinko, J.J.

1994-01-01

In-reactor testing of bolt-loaded precracked compact tension specimens was performed in 360 degree C water to determine effect of irradiation on the SCC behavior of HTH Alloy X-750 and direct aged Alloy 625. Out-of-flux and autoclave control specimens provided baseline data. Primary test variables were stress intensity factor, fluence, chemistry, processing history, prestrain. Results for the first series of experiments were presented at a previous conference. Data from two more recent experiments are compared with previous results; they confirm that high irradiation levels significantly reduce SCC resistance in HTH Alloy X-750. Heat-to-heat differences in IASCC were related to differences in boron content, with low boron heats showing improved SCC resistance. The in-reactor SCC performance of Alloy 625 was superior to that for Alloy X-750, as no cracking was observed in any Alloy 625 specimens even though they were tested at very high K 1 and fluence levels. A preliminary SCC usage model developed for Alloy X-750 indicates that in-reactor creep processes, which relax stresses but also increase crack tip strain rates, and radiolysis effects accelerate SCC. Hence, in-reactor SCC damage under high flux conditions may be more severe than that associated with postirradiation tests. In addition, preliminary mechanism studies were performed to determine the cause of IASCC In Alloy X-750

Experience in programming Assembly language of CDC CYBER 170/750 computer

International Nuclear Information System (INIS)

Caldeira, A.D.

1987-10-01

Aiming to optimize processing time of BCG computer code in the CDC CYBER 170/750 computer, the FORTRAN-V language of INTERP subroutine was converted to Assembly language. The BCG code was developed for solving neutron transport equation by iterative method, and the INTERP subroutine is innermost loop of the code carrying out 5 interpolation types. The central processor unit Assembly language of the CDC CYBER 170/750 computer and its application in implementing the interpolation subroutine of BCG code are described. (M.C.K.)

Irradiation-assisted stress corrosion cracking in HTH Alloy X-750 and Alloy 625

International Nuclear Information System (INIS)

Bajaj, R.; Mills, W.J.; Lebo, M.R.; Hyatt, B.Z.; Burke, M.G.

1995-01-01

In-reactor testing of bolt-loaded compact tension specimens was performed in 360 C water to determine the irradiation-assisted stress corrosion cracking (IASCC) behavior of HTH Alloy X-750 and direct-aged Alloy 625. New data confirm previous results showing that high irradiation levels reduce SCC resistance in Alloy X-750. Heat-to-heat variability correlates with boron content, with low boron heats showing improved IASCC properties. Alloy 625 is resistant to IASCC, as no cracking was observed in any Alloy 625 specimens. Microstructural, microchemical and deformation studies were performed to characterize the mechanisms responsible for IASCC in Alloy X-750 and the lack of an effect in Alloy 625. The mechanisms under investigation are: boron transmutation effects, radiation-induced changes in microstructure and deformation characteristics, and radiation-induced segregation. Irradiation of Alloy X-750 caused significant strengthening and ductility loss that was associated with the formation of cavities and dislocation loops. High irradiation levels did not cause significant segregation of alloying or trace elements in Alloy X-750. Irradiation of Alloy 625 resulted in the formation of small dislocation loops and a fine body-centered-orthorhombic phase. The strengthening due to the loops and precipitates was apparently offset by a partial dissolution of γ double-prime precipitates, as Alloy 625 showed no irradiation-induced strengthening or ductility loss. In the nonirradiated condition, an IASCC susceptible HTH heat containing 28 ppm B showed grain boundary segregation of boron, whereas a nonsusceptible HTH heat containing 2 ppm B and Alloy 625 with 20 ppm B did not show significant boron segregation. Transmutation of boron to helium at grain boundaries, coupled with matrix strengthening, is believed to be responsible for IASCC in Alloy X-750, and the absence of these two effects results in the superior IASCC resistance displayed by Alloy 625

48 CFR 750.7107 - Limitations upon exercise of authority.

Science.gov (United States)

2010-10-01

... Actions To Protect Foreign Policy Interests of the United States 750.7107 Limitations upon exercise of... action is necessary to protect the foreign policy interests of the United States; (2) Unless other legal...

21 CFR 358.750 - Labeling of drug products for the control of dandruff, seborrheic dermatitis, or psoriasis.

Science.gov (United States)

2010-04-01

... dandruff, seborrheic dermatitis, or psoriasis. 358.750 Section 358.750 Food and Drugs FOOD AND DRUG... Dermatitis, and Psoriasis § 358.750 Labeling of drug products for the control of dandruff, seborrheic dermatitis, or psoriasis. (a) Statement of identity. The labeling of the product contains the established...

Pemanfaatan Mikrotik RB750 Untuk Jaringan Wifi Pada SMK Muhammadiyah Kudus

Directory of Open Access Journals (Sweden)

R Rhoedy Setiawan

2013-06-01

Full Text Available Abstrak Dengan kendala user yang terbatas dan software pencatatan user yang terdata yang relatif mahal, pendekatan yang dilakukan adalah pembuatan sebuah software yang ke depan bisa menekan biaya.Pengaksesan internet untuk kalangan SMK Muhammadiyah Kudus dibatasi penggunaannya untuk penghematan biaya pembelian bandwidht akses internet.Pengaturan hak akses internet di SMK Muhammadiyah Kudus sekarang ini menggunakan mikrotik RB 750. Diharapkan alat yang digunakan dapat mencapai pengguna yang lebih banyak, diantara alat pilihan lain yang digunakan dalam penelitian jaringan berbasis wifi. Keyword: software, microtic rb750, bandwidht

750 keV beam line construction at the KEK

International Nuclear Information System (INIS)

Ishimaru, H.; Anami, S.; Inagaki, T.; Sakaue, T.; Itoh, K.; Fukumoto, S.

1976-01-01

The construction of 750 keV beam line of the KEK injector of the 12 GeV proton synchrotron was described. The beam line consists of the beam focusing quadrupoles, vacuum system, the electrostatic chopper and the various beam monitors. (author)

38 CFR 3.750 - Entitlement to concurrent receipt of military retired pay and disability compensation.

Science.gov (United States)

2010-07-01

... disability compensation. (a) Definition of military retired pay. For the purposes of this part, military... compensation. A veteran may reelect between benefits covered by this section at any time by submitting a... receipt of military retired pay and disability compensation. 3.750 Section 3.750 Pensions, Bonuses, and...

Estudio de microestructura y composición de la oxidación en vapor a 700 y 750oC de los aceros austeníticos AISI 304, 316 y 317

Directory of Open Access Journals (Sweden)

José Luddey Marulanda

2013-01-01

Full Text Available Se ha investigado la oxidación de los aceros inoxidables austeníticos AISI SAE: 304, 316 y 317; a temperaturas de 700 y 750oC, en una atmósfera próxima al 100% de vapor de agua, y de 10 a 1000h de exposición. La finalidad es comprobar la calidad de los aceros austeníticos y estudiar la morfología, composición y estructura de la fases de las capas formadas en la cascarilla del óxido de las muestras por Microscopía Electrónica de Barrido (SEM, Análisis de Rayos X por Dispersión de Energía (EDAX y Difracción de Rayos X (XRD, respectivamente. Así como también, se ha realizado a diferentes tiempos un estudio sistemático de termogravimetría de las muestras oxidadas, donde se ha observado que el acero AISI 304 presentó la menor ganancia de masa y el acero AISI 316 fue el de mayor de masa respecto a los tres aceros del trabajo. Adicionalmente fue realizado un estudio teórico de simulación termodinámica de oxidación en vapor de los tres aceros, en las mismas condiciones experimentales y mediante el programa Thermo-calc. En estos aceros oxidados se han comprobado la presencia de estructuras de fases de óxidos como: Fe2O3, espinelas protectoras Fe3O4 y Cr2NiO4, y óxidos mixtos de tipo (CrxFey2O3, (Fe,Cr,Mn3O4 y Ni6MnO8. Finalmente, se discute un posible mecanismo de la formación de las capas de óxidos de las muestras ensayadas.

Research and Measurement of Software Complexity Based on Wuli, Shili, Renli (WSR and Information Entropy

Directory of Open Access Journals (Sweden)

Rong Jiang

2015-04-01

Full Text Available Complexity is an important factor throughout the software life cycle. It is increasingly difficult to guarantee software quality, cost and development progress with the increase in complexity. Excessive complexity is one of the main reasons for the failure of software projects, so effective recognition, measurement and control of complexity becomes the key of project management. At first, this paper analyzes the current research situation of software complexity systematically and points out existing problems in current research. Then, it proposes a WSR framework of software complexity, which divides the complexity of software into three levels of Wuli (WL, Shili (SL and Renli (RL, so that the staff in different roles may have a better understanding of complexity. Man is the main source of complexity, but the current research focuses on WL complexity, and the research of RL complexity is extremely scarce, so this paper emphasizes the research of RL complexity of software projects. This paper not only analyzes the composing factors of RL complexity, but also provides the definition of RL complexity. Moreover, it puts forward a quantitative measurement method of the complexity of personnel organization hierarchy and the complexity of personnel communication information based on information entropy first and analyzes and validates the scientificity and rationality of this measurement method through a large number of cases.

NSLS 3: Conceptual design report: 750 MeV e+ or e- injector

International Nuclear Information System (INIS)

1986-05-01

The 750 MeV positron or electron injector is comprised of an electron linear accelerator which accelerates an intense beam of electrons to an energy of about 250 MeV, a positron converter, a second linear accelerator that boosts the final positron energy to 750 MeV, and a damping ring in which radiation damping is used to reduce the emittance of the positron beam for injection into the storage rings. The reasons for the need of a new injector are enumerated. The conceptual design of the system and its component systems are described, as well as project cost, schedule, and manpower requirements

Applicability of a 'marker-technique' to support the examination of crack growth behaviour in brittle and ductile Ni-alloys at 500 and 750 C

International Nuclear Information System (INIS)

Schwarze, D.; Schubert, F.

1999-12-01

The crack growth behaviour of materials for application in turbines at temperatures of 500- 750 C has been investigated. The creep and fatigue service loadings of a real turbine disc were simulated by introducing hold-times. The materials tested were the superalloy PM N18, Inconel 617 and the intermetallic phase β-NiAl of nominally stoichiometric composition. The crack growth tests were conducted in air and in vacuum (10 -5 mbar) to assess the influence of the test atmosphere. One of the main objectives was to develop a marker method and its application, as support for the crack growth tests carried out. The width of the marker required for the marker bands could be chosen through the number of stress cycles or the crack growth increment in the marker-cycle. At 500 C, the crack surfaces of the CT specimens of Inconel 617 and PM N18 exhibited mixed fractures with trans- and intercrystalline regions. The fracture development could be divided into three, classical parts. At his temperature for both alloys the K I concept for the evaluation of the crack growth may be used. The RCT specimens of the intermetallic phase β-NiAl fractured in a completely brittle manner with no measurable time to failure. At 500 C, Inconel 617 and especially PM N18 were well suited to the use of the marker method. Measurements of the distances between the marker bands gave a good estimate of the crack growth rates. At the higher test temperature of 750 C, the crack growth rates and the proportion of intercrystalline fracture increased for Inconel 617 and PM N18. In all three materials, the formation of pores and dimpled fracture was observed, especially at high ΔK I values, and the coarse-grained β-NiAl exhibited higher crack growth rates than the fine-grained material. For this temperature the evaluation of the crack growth experiments should be by the K I concept for PM N18 and for Inconel 617 the C * concept is recommended. At the higher test temperature, the increased plasticity of

Implantation of TRAC-PF1 computer code of VAX-11/750

International Nuclear Information System (INIS)

Madeira, A.A.; Souza Gouvea, L. de; Galetti, M.R.S.

1988-01-01

The implantation of TRAC-PF1 code, IBM version, in VAX-11/750 is described. This work provides Reator Department with an advanced best-estimate tool to perform loss-of-coolant accident analysis. (Author) [pt

Development of Multiple-Unit Floating Drug Delivery System of Clarithromycin: Formulation, in vitro Dissolution by Modified Dissolution Apparatus, in vivo Radiographic Studies in Human Volunteers.

Science.gov (United States)

Reddy, Arun B; Reddy, Narendar D

2017-07-01

Clarithromycin (CM), a broad spectrum macrolide antibiotic used to eradicate H. pylori in peptic ulcer. Clarithromycin (CM) is well absorbed from the gastrointestinal tract, but has a bioavailability of 50% due to rapid biodegradation. The aim of this investigation was to increase the gastric residence time, and to control the drug release of clarithromycin by formulating into multiple unit floating mini-tablets. Floating tablets were prepared by using direct compression method with HPMC K 4 M and Polyox WSR 1105 as release retarded polymers and sodium bicarbonate as gas generating agent. The prepared mini-tablets were evaluated for thickness, weight variation, friability, hardness, drug content, in vitro buoyancy, swelling studies, in vitro dissolution studies by using modified Rossett-Rice test and in vivo radiographic studies in healthy human volunteers in fasting conditions. DSC analysis revealed that no interaction between drug and excipients. All the physical parameters of the tablets were within the acceptable limits. The optimized formulation (F6) had showed controlled drug release of 99.16±3.22% in 12 h, by zero-order release kinetics, along with floating lag time of 9.5±1.28 s and total floating time of 12±0.14 h. X-ray imaging studies revealed that in vivo gastric residence time of clarithromycin floating mini-tablet in the stomach was about 3.5 h. The results demonstrated that the developed floating mini-tablets of clarithromycin caused significant enhancement in gastric retention time along with sustained effect and increased oral bioavailability. © Georg Thieme Verlag KG Stuttgart · New York.

A novel CXCR4-targeted near-infrared (NIR) fluorescent probe (Peptide R-NIR750) specifically detects CXCR4 expressing tumors.

Science.gov (United States)

Santagata, Sara; Portella, Luigi; Napolitano, Maria; Greco, Adelaide; D'Alterio, Crescenzo; Barone, Maria Vittoria; Luciano, Antonio; Gramanzini, Matteo; Auletta, Luigi; Arra, Claudio; Zannetti, Antonella; Scala, Stefania

2017-05-31

C-X-C chemokine receptor 4 (CXCR4) is over-expressed in multiple human cancers and correlates with tumor aggressiveness, poor prognosis and increased risk for distant metastases. Imaging agents for CXCR4 are thus highly desirable. We developed a novel CXCR4-targeted near-infrared (NIR) fluorescent probe (Peptide R-NIR750) conjugating the new developed CXCR4 peptidic antagonist Peptide R with the NIR fluorescent dye VivoTag-S750. Specific CXCR4 binding was obtained in cells overexpressing human CXCR4 (B16-hCXCR4 and human melanoma cells PES43), but not in CXCR4 low expressing cells (FB-1). Ex vivo evaluation demonstrated that PepR-NIR750 specifically detects B16-hCXCR4-derived subcutaneous tumors and lung metastases. Fluorescence Molecular Tomography (FMT) in vivo imaging was performed on mice carrying subcutaneous CHO and CHO-CXCR4 tumors. PepR-NIR750 accumulates only in CXCR4-positive expressing subcutaneous tumors. Additionally, an intense NIR fluorescence signal was detected in PES43-derived lung metastases of nude mice injected with PepR-NIR750 versus mice injected with VivoTag-S750. With a therapeutic intent, mice bearing PES43-derived lung metastases were treated with Peptide R. A the dramatic reduction in PES43-derived lung metastases was detected through a decrease of the PepR-NIR750 signal. PepR-NIR750 is a specific probe for non-invasive detection of human high CXCR4-expressing tumors and metastatic lesion and thus a valuable tool for cancer molecular imaging.

Kangaroo Mother Care Management of a 750 Ggrammes Baby: A ...

African Journals Online (AJOL)

This paper presents the successful management of 750 grammes low birth weight baby using kangaroo mother care in the hospital and at home. The baby had suffered a variety of morbidities associated with prematurity in the early neonatal period. Key words: Kangaroo mother care, low birth weight babies ...

Non-minimal CW inflation, electroweak symmetry breaking and the 750 GeV anomaly

Energy Technology Data Exchange (ETDEWEB)

Marzola, L. [National Institute of Chemical Physics and Biophysics,Rävala 10, 10143 Tallinn (Estonia); Laboratory of Theoretical Physics, Institute of Physics, University of Tartu,Ravila 14c, 50411 Tartu (Estonia); Racioppi, A. [National Institute of Chemical Physics and Biophysics,Rävala 10, 10143 Tallinn (Estonia); Raidal, M. [National Institute of Chemical Physics and Biophysics,Rävala 10, 10143 Tallinn (Estonia); Laboratory of Theoretical Physics, Institute of Physics, University of Tartu,Ravila 14c, 50411 Tartu (Estonia); Urban, F.R.; Veermäe, H. [National Institute of Chemical Physics and Biophysics,Rävala 10, 10143 Tallinn (Estonia)

2016-03-29

We study whether the hinted 750 GeV resonance at the LHC can be a Coleman-Weinberg inflaton which is non-minimally coupled to gravity. Since the inflaton must couple to new charged and coloured states to reproduce the LHC diphoton signature, the same interaction can generate its effective potential and trigger the electroweak symmetry breaking via the portal coupling to the Higgs boson. This inflationary scenario predicts a lower bound on the tensor-to-scalar ratio of r≳0.006, where the minimal value corresponds to the measured spectral index n{sub s}≃0.97. However, we find that the compatibility with the LHC diphoton signal requires exotic new physics at energy scales accessible at the LHC. We study and quantify the properties of the predicted exotic particles.

Detection of breast cancer microcalcification using 99mTc-MDP SPECT or Osteosense 750EX FMT imaging

International Nuclear Information System (INIS)

Felix, Dayo D.; Gore, John C.; Yankeelov, Thomas E.

2015-01-01

Background: In previous work, we demonstrated the presence of hydroxyapetite (type II microcalcification), HAP, in triple negative MDA-MB-231 breast cancer cells. We used 18 F-NaF to detect these types of cancers in mouse models as the free fluorine, 18 F − , binds to HAP similar to bone uptake. In this work, we investigate other bone targeting agents and techniques including 99m Tc-MDP SPECT and Osteosense 750EX FMT imaging as alternatives for breast cancer diagnosis via targeting HAP within the tumor microenvironment. Methods: Thirteen mice were injected subcutaneously in the right flank with 10 6 MDA-MB-231 cells. When the tumor size reached ~ 0.6 cm 3 , mice (n = 9) were injected with ~ 37 MBq of 99m Tc-MDP intravenously and then imaged one hour later in a NanoSPECT/CT or injected intravenously with 4 nmol/g of Osetosense 750EX and imaged 24 hours later in an FMT (n = 4). The imaging probe concentration in the tumor was compared to that of muscle. Following SPECT imaging, the tumors were harvested, sectioned into 10 μm slices, and underwent autoradiography or von Kossa staining to correlate 99m Tc-MDP binding with HAP distribution within the tumor. The SPECT images were normalized to the injected dose and regions-of-interest (ROIs) were drawn around bone, tumor, and muscle to obtain the radiotracer concentration in these regions in units of percent injected dose per unit volume. ROIs were drawn around bone and tumor in the FMT images as no FMT signal was observed in normal muscle. Results: Uptake of 99m Tc-MDP was observed in the bone and tumor with little or no uptake in the muscle with concentrations of 11.34 ± 1.46 (mean ± SD), 2.22 ± 0.95, and 0.05 ± 0.04 %ID/cc, respectively. Uptake of Osteosense 750EX was also observed in the bone and tumor with concentrations of 0.35 ± 0.07 (mean ± SD) and 0.04 ± 0.01 picomoles, respectively. No FMT signal was observed in the normal muscle. There was no significant difference in the bone-to-tumor ratio between

23 CFR 750.711 - Structures which have never displayed advertising material.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Structures which have never displayed advertising... RIGHT-OF-WAY AND ENVIRONMENT HIGHWAY BEAUTIFICATION Outdoor Advertising Control § 750.711 Structures which have never displayed advertising material. Structures, including poles, which have never displayed...

Photons, photon jets and dark photons at 750 GeV and beyond

International Nuclear Information System (INIS)

Dasgupta, Basudeb; Kopp, Joachim

2016-03-01

In new physics searches involving photons at the LHC, one challenge is to distinguish scenarios with isolated photons from models leading to ''photon jets''. For instance, in the context of the 750 GeV diphoton excess, it was pointed out that a true diphoton resonance S → γγ can be mimicked by a process of the form pp → S → aa → 4γ, where S is a new scalar with a mass of 750 GeV and a is a light pseudoscalar decaying to two collinear photons. Photon jets can be distinguished from isolated photons by exploiting the fact that a large fraction of photons convert to an e + e - pair inside the inner detector. In this note, we quantify this discrimination power, and we study how the sensitivity of future searches differs for photon jets compared to isolated photons. We also investigate how our results depend on the lifetime of the particle(s) decaying to the photon jet. Finally, we discuss the extension to S → A'A' → e + e - e + e - , where there are no photons at all but the dark photon A' decays to e + e - pairs. Our results will be useful in future studies of the putative 750 GeV signal, but also more generally in any new physics search involving hard photons.

23 CFR 750.709 - On-property or on-premise advertising.

Science.gov (United States)

2010-04-01

..., it shall be considered the business of outdoor advertising and not an on-property sign. (c) A sale or lease sign which also advertises any product or service not conducted upon and unrelated to the business... 23 Highways 1 2010-04-01 2010-04-01 false On-property or on-premise advertising. 750.709 Section...

Environmentally assisted cracking of Inconel X750

International Nuclear Information System (INIS)

Skeldon, P.; Lowick, J.H.B.; Hurst, P.

1987-05-01

The resistance of different heat treatments of Inconel X750 to environmentally assisted cracking in simulated PWR primary water at 340 0 C has been assessed by slow strain rate, U-bend and bent beam tests. At the corrosion potential (ca - 670 mV (Ag/AgCl)), in low oxygen conditions (≤ 2 ppb) a single-stage ageing (704 0 C/20 h) gives much improved resistance compared with two-stage ageing (885 0 C/24 h + 704 0 C/20 h). However, material given the former ageing treatment can be susceptible to cracking at highly anodic potentials (> - 200 mV (Ag/AgCl)) if the alloy is significantly sensitized. (author)

Fatigue Crack Growth Behavior of Nickel-base Superalloy Haynes 282 at 550-750 °C

Science.gov (United States)

Rozman, K. A.; Kruzic, J. J.; Hawk, J. A.

2015-08-01

The fatigue crack growth rates for nickel-based superalloy Haynes 282 were measured at temperatures of 550, 650, and 750 °C using compact tension specimens with a load ratio of 0.1 and cyclic loading frequencies of 25 Hz and 0.25 Hz. Increasing the temperature from 550 to 750 °C caused the fatigue crack growth rates to increase from ~20 to 60% depending upon the applied stress intensity level. The effect of reducing the applied loading frequency increased the fatigue crack growth rates from ~20 to 70%, also depending upon the applied stress intensity range. The crack path was observed to be transgranular for the temperatures and frequencies used during fatigue crack growth rate testing. At 750 °C, there were some indications of limited intergranular cracking excursions at both loading frequencies; however, the extent of intergranular crack growth was limited and the cause is not understood at this time.

15 CFR 750.5 - Status of pending applications and other requests.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Status of pending applications and... REGULATIONS APPLICATION PROCESSING, ISSUANCE, AND DENIAL § 750.5 Status of pending applications and other requests. (a) Information available. You may contact BIS for status of your pending Classification Request...

Probabilistic Modeling of the Fatigue Crack Growth Rate for Ni-base Alloy X-750

International Nuclear Information System (INIS)

Yoon, Jae Young; Nam, Hyo On; Hwang, Il Soon; Tae Hyun Lee

2012-01-01

The Bayesian inference was employed to reduce the uncertainties contained in EAC modeling parameters that have been established from experiments with Alloy X-750. Corrosion fatigue crack growth rate model(FCGR) was developed by fitting into Paris' Law of measured data from the several fatigue tests conducted either in constant load or constant ΔK mode. From fitting the data to Paris' Law, the parameters C and m of Paris' Law model were assumed to obey the Gaussian distribution. These parameters characterizing the corrosion fatigue crack growth behavior of X-750 were updated to reduce the uncertainty in the model by using the Bayesian inference method. (author)

Photons, photon jets, and dark photons at 750 GeV and beyond.

Science.gov (United States)

Dasgupta, Basudeb; Kopp, Joachim; Schwaller, Pedro

2016-01-01

In new physics searches involving photons at the LHC, one challenge is to distinguish scenarios with isolated photons from models leading to "photon jets". For instance, in the context of the 750 GeV diphoton excess, it was pointed out that a true diphoton resonance [Formula: see text] can be mimicked by a process of the form [Formula: see text], where S is a new scalar with a mass of 750 GeV and a is a light pseudoscalar decaying to two collinear photons. Photon jets can be distinguished from isolated photons by exploiting the fact that a large fraction of photons convert to an [Formula: see text] pair inside the inner detector. In this note, we quantify this discrimination power, and we study how the sensitivity of future searches differs for photon jets compared to isolated photons. We also investigate how our results depend on the lifetime of the particle(s) decaying to the photon jet. Finally, we discuss the extension to [Formula: see text], where there are no photons at all but the dark photon [Formula: see text] decays to [Formula: see text] pairs. Our results will be useful in future studies of the putative 750 GeV signal, but also more generally in any new physics search involving hard photons.

PA01.81. Impact of globalisation on health w.s.r. metabolic syndrome and its ayurvedic management)

Science.gov (United States)

Layeeq, Shaizi; Srivastava, Alok K

2012-01-01

Purpose: According to WHO report 2002,Cardiovacular diseases (CVD) will be the largest cause of death and disability in India by 2012. Metabolic Syndrome (MetS), a constellation of dyslipidemia, elevated blood glucose, hypertension and obesity is emerging as the most common risk factor for CVD. The rising prevalence of individual components of Metabolic Syndrome is mainly attributed to globalisation which has made available cheap, unhealthy food on the main menu & also brought with it sedentary lifestyle. It is a need of time to pay due consideration on the problem and search for alternative medicine. So the aim of the study is: 1. To study the impact of globalisation on health w.s.r Metabolic Syndrome. 2. To assess the clinical efficacy of Panchakarma in its management. Method: For the study large-scale survey, other documented data and published articles were studied. For clinical contrieve 20 patients were registered and were given Virechana Karma followed by administration of Shuddha Guggulu as palliative measure. Result: The results show that globalisation has a great impact on all the components of Metabolic Syndrome. However on management with Panchakarma (Virechana Karma) followed by Shuddha Guggulu encouraging results were found. The overall effect of therapy was found to be 82.5%. Conclusion: There is a high prevalence of metabolic syndrome in India and it is a need of time to consider alternative treatment for its management alongwith change in lifestyle to reduce the risk of cardiovascular disease.

Mechanisms of plastic deformation (cyclic and monotonous) of Inconel X750

International Nuclear Information System (INIS)

Randrianarivony, H.

1992-01-01

Plastic deformation mechanisms under cyclic or monotonous solicitations, are analysed in function of Inconel X750 initial macrostructure. Two heat treated Inconel (first one is treated at 1366 K one hour, air cooled, aged at 977 K 20 hours, and air cooled, the second alloy is aged at 1158 K 24 hours, air cooled, aged at 977 K 20 hours, and air cooled), are characterized respectively by a fine and uniform precipitation of the γ' phase (approximative formulae: Ni 3 (Al,Ti)), and by a bimodal distribution of γ' precipitates. In both alloys, dislocations pairs (characteristic of a shearing by antiphase wall creation) are observed, and the crossing mechanism of the γ' precipitates by creation of overstructure pile defects is the same. But, glissile loops dislocations are less numerous than dislocations pairs in the first alloy, involving denser bands structure for this alloy (dislocations loops are always observed around γ' precipitates). Some comportment explications of Inconel X750 in PWR medium are given. (A.B.). refs., figs., tabs

48 CFR 750.7110-3 - Submission of cases to the M/OP Director.

Science.gov (United States)

2010-10-01

... Actions To Protect Foreign Policy Interests of the United States 750.7110-3 Submission of cases to the M... contracting officer that such action is necessary to protect the foreign policy interest of the United States...

Implications of the 750 GeV γγ resonance as a case study for the International Linear Collider

International Nuclear Information System (INIS)

Fujii, Keisuke; Grojean, Christophe; Univ. Autonoma de Barcelon; Peskin, Michael E.

2016-07-01

If the γγ resonance at 750 GeV suggested by 2015 LHC data turns out to be a real effect, what are the implications for the physics case and upgrade path of the International Linear Collider? Whether or not the resonance is confirmed, this question provides an interesting case study testing the robustness of the ILC physics case. In this note, we address this question with two points: (1) Almost all models proposed for the new 750 GeV particle require additional new particles with electroweak couplings. The key elements of the 500 GeV ILC physics program - precision measurements of the Higgs boson, the top quark, and 4-fermion interactions - will powerfully discriminate among these models. This information will be important in conjunction with new LHC data, or alone, if the new particles accompanying the 750 GeV resonance are beyond the mass reach of the LHC. (2) Over a longer term, the energy upgrade of the ILC to 1 TeV already discussed in the ILC TDR will enable experiments in γγ and e"+e"- collisions to directly produce and study the 750 GeV particle from these unique initial states.

Implications of the 750 GeV γγ Resonance as a Case Study for the International Linear Collider

Energy Technology Data Exchange (ETDEWEB)

Fujii, Keisuke [High Energy Accelerator Research Organization (KEK), Tsukuba (Japan); Grojean, Christophe [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Univ. Autonoma de Barcelona (Spain). Inst. Catalana de Recerca i Estudis Avancats (ICREA) and Inst. de Fisica d' Altes Energies (IFAE); Peskin, Michael E. [SLAC National Accelerator Lab., Menlo Park, CA (United States); Barklow, Tim [SLAC National Accelerator Lab., Menlo Park, CA (United States); Gao, Yuanning [Tsinghua Univ., Beijing (China). Center for High Energy Physics; Kanemura, Shinya [Univ. of Toyama (Japan). Dept. of Physics; Kim, Hyungdo [Seoul National Univ. (Korea, Republic of). Dept. of Physics and Astronomy; List, Jenny [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Nojiri, Mihoko [High Energy Accelerator Research Organization (KEK), Tsukuba (Japan); Univ. of Tokyo (Japan). Kavli Inst. for the Physics and Mathematics of the Universe; Perelstein, Maxim [Cornell Univ., Ithaca, NY (United States). Lab. for Elementary Particle Physics; Poschl, Roman [Univ. Paris-Sud, Orsay (France). Linear Accelerator Lab. (LAL). Centre Scientifique d' Orsay; Reuter, Jurgen [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany); Simon, Frank [Max Planck Inst. for Physics (MPP), Munich (Germany); Tanabe, Tomohiko [Univ. of Tokyo (Japan). International Center for Elementary Particle Physics (ICEPP); Yu, Jaehoon [Univ. of Texas, Arlington, TX (United States). Dept. of Physics; Wells, James D. [Univ. of Michigan, Ann Arbor, MI (United States). Michigan Center for Theoretical Physics; Falkowski, Adam [Univ. Paris-Sud, Orsay (France). Lab. of Theoretical Physics (LPT); Matsumoto, Shigeki [Univ. of Tokyo (Japan). Kavli Inst. for the Physics and Mathematics of the Universe; Moroi, Takeo [Univ. of Tokyo (Japan). Dept. of Physics; Richard, Francois [Univ. Paris-Sud, Orsay (France). Linear Accelerator Lab. (LAL). Centre Scientifique d' Orsay; Tian, Junping [Univ. of Tokyo (Japan). International Center for Elementary Particle Physics (ICEPP); Vos, Marcel [Spanish National Research Council (CSIC), Valencia (Spain) and Univ. of Valencia (Spain). Inst. for Corpuscular Physics (IFIC); Yokoya, Hiroshi [Korean Inst. for Advanced Study (KIAS), Seoul (Korea, Republic of ). Quantum Universe Center; Murayama, Hitoshi [Univ. of Tokyo (Japan). Kavli Inst. for the Physics and Mathematics of the Universe; Univ. of California, Berkeley, CA (United States). Dept. of Physics; Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Yamamoto, Hitoshi [Tohoku Univ., Sendai (Japan). Dept. of Physics

2016-07-14

If the γγ resonance at 750 GeV suggested by 2015 LHC data turns out to be a real effect, what are the implications for the physics case and upgrade path of the International Linear Collider? Whether or not the resonance is confirmed, this question provides an interesting case study testing the robustness of the ILC physics case. In this note, we address this question with two points: (1) Almost all models proposed for the new 750 GeV particle require additional new particles with electroweak couplings. The key elements of the 500 GeV ILC physics program - precision measurements of the Higgs boson, the top quark, and 4-fermion interactions - will powerfully discriminate among these models. This information will be important in conjunction with new LHC data, or alone, if the new particles accompanying the 750 GeV resonance are beyond the mass reach of the LHC. (2) Over a longer term, the energy upgrade of the ILC to 1 TeV already discussed in the ILC TDR will enable experiments in γγ and e⁺e^- collisions to directly produce and study the 750 GeV particle from these unique initial states.

Development and evaluation of a chronotherapeutic drug delivery system of torsemide

Directory of Open Access Journals (Sweden)

Songa Ambedkar Sunil

2011-09-01

Full Text Available The objective of this study was to prepare and evaluate chronotherapeutic drug delivery systems (ChrDDs of torsemide. Compression coated tablets (CCT containing torsemide in the core tablet were prepared by the compression coating technique with different grades of polyethylene oxide (PEO WSR 301 & 1105. The optimized formulations were characterised for tabletting parameters and drug polymer interaction by Fourier-Transform Infrared Spectroscopy (FTIR.The hardness of all the CCT using PEO WSR 301 & PEO WSR 1105 were in the range 6-8 kg/cm² & 5.5 to 7 kg/cm² respectively. Their friability values were 99%. The FTIR studies showed no interaction throughout the process of development. Formulations of F7 and of P7 were considered optimized formulations since they yielded a predetermined lag time of 6h before burst release. Hence, these formulations can be exploited to achieve chronotherapeutic drug delivery systems of Torsemide for the treatment of hypertension at the time the patient needs it.O objetivo deste estudo foi preparar e avaliar sistemas cronoterapêuticos de liberação de fármacos (ChrDDs de torsemida. Comprimidos revestidos por compressão (CCT contendo torsemida no (núcleo foram preparados pela técnica de revestimento por compressão, com diferentes categorias de óxido de polietileno (PEO WSR 301 & 1105. As formulações otimizadas foram caracterizadas por parâmetros de compressão e interação fármaco polímero por Infravermelho com Transformada de Fourier (FTIR. A dureza dos CCT utilizando PEO WSR 301 e PEO WSR 1105 foi entre 6-8 kg/cm² e 5,5 a 7 kg/cm², respectivamente. Os valores de friabilidade foram 99%. Os estudos de FTIR mostraram que não h[a interação durante o processo de desenvolvimento. As formulações F7 e P7 foram consideradas otimizadas, uma vez que resultaram em tempo de retardo pré-determinado de 6 h antes da liberação por meio de explosão. Dessa forma, estas formulações podem ser exploradas para

Release of corrosion products from construction materials containing cobalt. Pt.2: Inconel X750

International Nuclear Information System (INIS)

Falk, I.

1978-02-01

This report describes experimental work aimed at determining the release rate for corrosion products from 18Cr8Ni steel and Inconel X750 in BWR environments. For test purposes these environments were simulated in a high pressure loop, where irradiated samples of the materials were exposed for 720 hours. The amounts of released products were determined using gamma spectrometric analysis. The results show that the release from Inconel X750 is higher than that from 18Cr8Ni steel. The release calculated from Co58 measurements is 7 times higher and from Co60 measurements it is 1.5 times higher. Both the filtered and the deposited fractions of the released corrosion products exhibit the same relative concentrations of Co58 and Co60. (author)

Test of a compact 750 keV H- preinjector

International Nuclear Information System (INIS)

Meitzler, C.R.; Datte, P.; Huson, F.R.; Kazimi, R.; Kronke, C.; Machida, S.; MacKay, W.; Ohnuma, S.; Raparia, D.; Sun, D.; Tompkins, P.; Ziegler, J.

1989-01-01

A 750 keV RFQ based accelerator is being developed at the Texas Accelerator Center. A modified magnetron ion source will produce 10--100 mA of 30 keV H - beam. A 35 keV transport line that transports the beam from the ion source to the entrance of the RFQ without becoming neutralized has been designed and is under construction. The RFQ is a 86 cm long, four rod structure that operates at 470 MHz. Results of tests on the cold model are reported. 5 refs

23 CFR 750.105 - Signs that may be permitted in protected areas.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false Signs that may be permitted in protected areas. 750.105... protected areas. (a) Erection or maintenance of the following signs may be permitted in protected areas... phenomena, historic sites, areas of natural scenic beauty or naturally suited for outdoor recreation and...

SU-E-I-22: A Comprehensive Investigation of Noise Variations Between the GE Discovery CT750 HD and GE LightSpeed VCT

International Nuclear Information System (INIS)

Bache, S; Loyer, E; Stauduhar, P; Liu, X; Rong, J

2015-01-01

Purpose: To quantify and compare the noise properties between two GE CT models-the Discovery CT750 HD (aka HD750) and LightSpeed VCT, with the overall goal of assessing the impact in clinical diagnostic practice. Methods: Daily QC data from a fleet of 9 CT scanners currently in clinical use were investigated – 5 HD750 and 4 VCT (over 600 total acquisitions for each scanner). A standard GE QC phantom was scanned daily using two sets of scan parameters with each scanner over 1 year. Water CT number and standard deviation were recorded from the image of water section of the QC phantom. The standard GE QC scan parameters (Pitch = 0.516, 120kVp, 0.4s, 335mA, Small Body SFOV, 5mm thickness) and an in-house developed protocol (Axial, 120kVp, 1.0s, 240mA, Head SFOV, 5mm thickness) were used, with Standard reconstruction algorithm. Noise was measured as the standard deviation in the center of the water phantom image. Inter-model noise distributions and tube output in mR/mAs were compared to assess any relative differences in noise properties. Results: With the in-house protocols, average noise for the five HD750 scanners was ∼9% higher than the VCT scanners (5.8 vs 5.3). For the GE QC protocol, average noise with the HD750 scanners was ∼11% higher than with the VCT scanners (4.8 vs 4.3). This discrepancy in noise between the two models was found despite the tube output in mR/mAs being comparable with the HD750 scanners only having ∼4% lower output (8.0 vs 8.3 mR/mAs). Conclusion: Using identical scan protocols, average noise in images from the HD750 group was higher than that from the VCT group. This confirms feedback from an institutional radiologist’s feedback regarding grainier patient images from HD750 scanners. Further investigation is warranted to assess the noise texture and distribution, as well as clinical impact

42 CFR 422.750 - Types of intermediate sanctions and civil money penalties.

Science.gov (United States)

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Types of intermediate sanctions and civil money... § 422.750 Types of intermediate sanctions and civil money penalties. (a) The following intermediate... organization. (b) CMS may impose civil money penalties as specified in 422.760. [72 FR 68725, Dec. 5, 2007, as...

Hydrodynamic cavitation in micro channels with channel sizes of 100 and 750 micrometers

NARCIS (Netherlands)

Rooze, J.; Andre, M.; Gulik, van der G.J.S.; Fernandez-Rivas, D.; Gardeniers, J.G.E.; Rebrov, E.; Schouten, J.C.; Keurentjes, J.T.F.

2012-01-01

Decreasing the constriction size and residence time in hydrodynamic cavitation is predicted to give increased hot spot temperatures at bubble collapse and increased radical formation rate. Cavitation in a 100 × 100 µm2 rectangular micro channel and in a circular 750 µm diameter milli channel has

The 750 GeV diphoton resonance as an sgoldstino: a reappraisal

International Nuclear Information System (INIS)

Bardhan, Debjyoti; Byakti, Pritibhajan; Ghosh, Diptimoy; Sharma, Tarun

2016-01-01

Among the various explanations of the possible 750 GeV diphoton resonance, the possibility of it being an sgoldstino is an attractive one, as it is related to the spontaneous breaking of global supersymmetry. We discuss this possibility in this paper and point out the various theoretical issues associated with it. In particular, we indicate the difficulties of this explanation in realistic models of gauge mediated supersymmetry breaking.

Effect of heat treatment conditions on stress corrosion cracking resistance of alloy X-750 in high temperature water

International Nuclear Information System (INIS)

Yonezawa, Toshio; Onimura, Kichiro; Sakamoto, Naruo; Sasaguri, Nobuya; Susukida, Hiroshi; Nakata, Hidenori.

1984-01-01

In order to improve the resistance of the Alloy X-750 in high temperature and high purity water, the authors investigated the influence of heat treatment condition on the stress corrosion cracking resistance of the alloy. This paper describes results of the stress corrosion cracking test and some discussion on the mechanism of the stress corrosion cracking of Alloy X-750 in deaerated high temperature water. The following results were obtained. (1) The stress corrosion cracking resistance of Alloy X-750 in deaerated high temperature water remarkably depended upon the heat treatment condition. The materials solution heat treated and aged within temperature ranges from 1065 to 1100 0 C and from 704 to 732 0 C, respectively, have a good resistance to the stress corrosion cracking in deaerated high temperature water. Especially, water cooling after the solution heat treatment gives an excellent resistance to the stress corrosion cracking in deaerated high temperature water. (2) Any correlations were not observed between the stress corrosion cracking susceptibility of Alloy X-750 in deaerated high temperature water and grain boundary chromium depleted zones, precipitate free zones and the grain boundary segregation of impurity elements and so on. It appears that there are good correlations between the stress corrosion cracking resistance of the alloy in the environment and the kinds, morphology and coherency of precipitates along the grain boundaries. (author)

Reaction K-p→π0π0Λ from pK-=514 to 750 MeV/c

International Nuclear Information System (INIS)

Prakhov, S.; Nefkens, B.M.K.; Clajus, M.; Marusic, A.; McDonald, S.; Phaisangittisakul, N.; Price, J. W.; Starostin, A.; Tippens, W.B.; Allgower, C.E.; Spinka, H.; Bekrenev, V.; Koulbardis, A.; Kozlenko, N.; Kruglov, S.; Lopatin, I.; Briscoe, W.J.; Shafi, A.; Comfort, J.R.; Craig, K.

2004-01-01

Reaction K - p→π 0 π 0 Λ was measured at eight incident K - momenta between 514 and 750 MeV/c using the Crystal Ball multiphoton spectrometer. The reaction dynamics are displayed in total cross sections, Dalitz plots, invariant-mass spectra, production angular distributions, and the Λ polarization. The π 0 π 0 Λ production is dominated by the π 0 Σ 0 (1385) intermediate state; no trace of other light Σ * states is observed, and the role of the f 0 (600) meson appears to be insignificant. A striking similarity is seen between K - p→π 0 π 0 Λ and π - p→π 0 π 0 n; this can be understood as a consequence of dynamical flavor symmetry

Hydrodynamic cavitation in micro channels with channel sizes of 100 and 750 micrometers

NARCIS (Netherlands)

Rooze, J.; André, M.; van der Gulik, G-J.S.; Fernandez Rivas, David; Gardeniers, Johannes G.E.; Rebrov, E.V.; Schouten, J.C.; Keurentjes, J.T.F.

2012-01-01

Decreasing the constriction size and residence time in hydrodynamic cavitation is predicted to give increased hot spot temperatures at bubble collapse and increased radical formation rate. Cavitation in a 100 × 100 μm2 rectangular micro channel and in a circular 750 μm diameter milli channel has

30 CFR 750.21 - Coal extraction incidental to the extraction of other minerals.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Coal extraction incidental to the extraction of... ENFORCEMENT, DEPARTMENT OF THE INTERIOR INDIAN LANDS PROGRAM REQUIREMENTS FOR SURFACE COAL MINING AND RECLAMATION OPERATIONS ON INDIAN LANDS § 750.21 Coal extraction incidental to the extraction of other minerals...

Effect of temperature upon the fatigue-crack propagation behavior of Inconel X-750

International Nuclear Information System (INIS)

James, L.A.

1976-05-01

The techniques of linear-elastic fracture mechanics were employed to characterize the effect of temperature upon the fatigue-crack propagation behavior of precipitation heat-treated Inconel X-750 in an air environment over the range 75-1200 0 F. In general, fatigue-crack growth rates increased with increasing test temperature

The effect of thermal treatment on the fracture properties of alloy X-750 in aqueous environments

International Nuclear Information System (INIS)

Ballinger, R.; Elliott, C.S.; Hwang, I.S.; Prybylowski, J.

1993-05-01

Alloy X-750 is a high strength, age hardenable nickel-base alloy used in light water nuclear reactors. The excellent corrosion resistance and high temperature strength of alloy X-750 make it suitable for use in a variety of structure components in both pressurized water reactors and boiling water reactors. These applications involve exposure of highly stressed material to aqueous media. Operational stresses are subject to low frequency thermally induced fluctuations and high frequency flow induced fluctuations. In general, alloy X-750 has performed well in light water reactors. However, an economically significant number of components have failed unexpectedly due to localized forms of attack such as corrosion fatigue and stress corrosion cracking. Thermal processing history is known to play a significant role in the fracture properties of alloy X-750 in aqueous environments. While thermal treatments have been developed recently to improve performance, in many cases the reason for improved performance remains unclear. Therefore, identification of the mechanisms responsible for the degradation of fracture properties in aqueous environments is necessary. As a corollary it is necessary to achieve an understanding of how thermal treatment influences microstructure and, in turn, how microstructure influences fracture properties in aqueous environments. This report discusses five thermal treatments which were studied: (1) SA-1 hr at 1093 degree C, (2) AH - 24 hr at 885 degree C + 20 hr at 704 degree C, (3) HTH - 1 hr at 1093 degree C + 20 hr at 704 degree C, (4) AHTH - 1 hr at 1093 degree C + 24 hr at 885 degree C + 20 hr at 704 degree C, and (5) HOA - 1 hr at 1093 degree C + 100 hrs at 760 degree C. Microstructural characterization of these materials was accomplished through the use of optical microscopy, transmission electron microscopy,scanning transmission electron microscopy, energy dispersive x-ray spectroscopy, and x-ray diffractometry

Higgs Stability and the 750 GeV Diphoton Excess

CERN Document Server

Salvio, Alberto

2016-01-01

We study the implications of a possible unstable particle with mass $M_X<$ TeV for the Higgs stability, naturalness and inflation. We pay particular attention to the case $M_X\\approx$ 750 GeV, suggested by recent results of ATLAS and CMS on diphoton final states, and work within the minimal model: we add to the Standard Model field content a pseudoscalar and a vector-like charged quark. This can stabilize the electroweak vacuum without invoking new physics at very high energies, which would give an unnaturally large contribution to the Higgs mass. We also show that inflation can be obtained via a UV modification of General Relativity.

750 GeV resonance in the gauged U(1′-extended MSSM

Directory of Open Access Journals (Sweden)

Yun Jiang

2016-08-01

Full Text Available Recently the ATLAS and CMS Collaborations at the LHC announced their observation of a potential 750 GeV di-photon resonance, after analyzing the s=13 TeV LHC data. This observation has significant implications for low-energy supersymmetry. Beyond the MSSM and the NMSSM, we study the MSSM-extensions with an extra U(1′ gauge symmetry. The anomaly cancellation and the spontaneous breaking of the non-decoupled U(1′ generally require introducing vector-like supermultiplets (both colored and color-neutral ones and singlet supermultiplets, respectively. We illustrate that the potential 750 GeV resonance (Y can be accommodated in various mechanisms, as a singlet-like scalar or pseudoscalar. Three benchmark scenarios are presented: (1 vector-like quarks (VLQ mediated pp→Y→γγ; (2 scalar VLQ mediated pp→Y→γγ; (3 heavy scalar (pseudo-scalar H/A associated production pp→H⁎/A⁎→YH/h. Additionally, we notice that the Z′-mediated vector boson fusion production and Z′-associated production pp→Yqq′, if yielding a signal rate of the observed level, might have been excluded by the searches for Z′ via Drell–Yan process at the LHC.

23 CFR 750.104 - Signs that may not be permitted in protected areas.

Science.gov (United States)

2010-04-01

... Advertising Adjacent to the Interstate System Under the 1958 Bonus Program § 750.104 Signs that may not be... protected areas: (a) Signs advertising activities that are illegal under State or Federal laws or regulations in effect at the location of such signs or at the location of such activities. (b) Obsolete signs...

Lymphoid irradiation in intractable rheumatoid arthritis. A double-blind, randomized study comparing 750-rad treatment with 2,000-rad treatment

International Nuclear Information System (INIS)

Hanly, J.G.; Hassan, J.; Moriarty, M.; Barry, C.; Molony, J.; Casey, E.; Whelan, A.; Feighery, C.; Bresnihan, B.

1986-01-01

Twenty patients with intractable rheumatoid arthritis were treated with 750-rad or 2,000-rad lymphoid irradiation in a randomized double-blind comparative study. Over a 12-month followup period, there was a significant improvement in 4 of 7 and 6 of 7 standard parameters of disease activity following treatment with 750 rads and 2,000 rads, respectively. Transient, short-term toxicity was less frequent with the lower dose. In both groups, there was a sustained peripheral blood lymphopenia, a selective depletion of T helper (Leu-3a+) lymphocytes, and reduced in vitro mitogen responses. These changes did not occur, however, in synovial fluid. These results suggest that 750-rad lymphoid irradiation is as effective as, but less toxic than, that with 2,000 rads in the management of patients with intractable rheumatoid arthritis

UNIVERSITIES WORLDSKILLS RUSSIA COMPETITIONS AS A MEANS OF DEVELOPING BACHELOR’S COMPETENCIES ON SPECIALTY “TOURISM”

Directory of Open Access Journals (Sweden)

Olga Victorovna Kandyba

2018-01-01

Full Text Available The relevance of the inclusion of the universities competitions in accordance with WorldSkills Russia standards (hereinafter – WSR is determined by the problematic situation that has developed in the higher education system and the modern requirements of the tourist industry labor market for graduates. Universities competitions in accordance with international standards are a new direction in the WSR movement, which can enhance the status of vocational education. This is the first experience in Russia, which, first, requires reflection, understanding and, accordingly, acceptance by the university teaching community of the WSR movement itself. Secondly, the conducted competitions have revealed a number of problems that must be solved on the way to effective implementation of WSR standards in the educational process. The article presents the matrix of professional competencies, compiled on the basis of the Federal State Educational Standard of the Higher Professional Education in “Tourism” training area 43.03.02 and the Skill WSR “Tourism” standards. On the basis of the developed matrix of competences, the correlation between the professional competencies of HPE FSES and competencies shown in the modules of the Skill WSR “Tourism” is revealed. Purpose Conducting a comparative analysis of the competencies of the HPE FSES in “Tourism” training area with competencies based on the modules of the competition task of the WSR Championship. Methodology In the article methods of included observation, peer review and comparative analysis were used. Results A comparative analysis of the competencies of the HPE FSES in “Tourism” training area with competencies necessary to complete the modules of the competition task of the WSR competition is conducted, recommendations on the expansion of the elements of the competition tasks for the university championship WSR are given. Practical implications The results obtained should be used to

Postirradiation fracture toughness of Inconel X-750

International Nuclear Information System (INIS)

Mills, W.J.

1983-01-01

The effect of fast-neutron irradiation on the fracture toughness response of Inconel X-750 was characterized at 427 deg C using the J-R curve technique. Irradiation exposures ranging from 3 to 16 displacements per atom resulted in a reduction in Jsub(Ic) from 130 to 76 kJ/m 2 and a reduction in tearing modulus from 32 to 2.6. Postirradiation fractographic examination revealed that an intergranular fracture mechanism was dominant, in contrast to the extensive transgranular cracking mode found on unirradiated fracture surfaces. The enhanced intergranular failure observed after irradiation was caused by extensive heterogeneous slip in a matrix that was greatly strengthened by an irradiation-induced dislocation substructure. Specifically, intense planar slip bands impinged on the grain boundaries and generated large stress concentrations. Since the stress concentrations could not be relaxed by the hardened matrix, the grain boundaries 'unzipped' readily, resulting in the low toughness and tearing resistance. (author)

Thinking Inside the Box: Simple Methods to Evaluate Complex Treatments

Directory of Open Access Journals (Sweden)

J. Michael Menke

2011-10-01

Full Text Available We risk ignoring cheaper and safer medical treatments because they cannot be patented, lack profit potential, require too much patient-contact time, or do not have scientific results. Novel medical treatments may be difficult to evaluate for a variety of reasons such as patient selection bias, the effect of the package of care, or the lack of identifying the active elements of treatment. Whole Systems Research (WSR is an approach designed to assess the performance of complete packages of clinical management. While the WSR method is compelling, there is no standard procedure for WSR, and its implementation may be intimidating. The truth is that WSR methodological tools are neither new nor complicated. There are two sequential steps, or boxes, that guide WSR methodology: establishing system predictability, followed by an audit of system element effectiveness. We describe the implementation of WSR with a particular attention to threats to validity (Shadish, Cook, & Campbell, 2002; Shadish & Heinsman, 1997. DOI: 10.2458/azu_jmmss.v2i1.12365

Preliminary tests of WIMSD/4 program installed in a CDC CYBER 170/750 at IEAV

International Nuclear Information System (INIS)

Claro, L.H.; Anaf, J.

1989-12-01

Some cell calculations options of the WIMSD/4 code were tested. Comparisons with the HAMMER code results are presented. Control cards for WIMSD/4 execution in the IEAv CDC CYBER 170/750 and input examples are included. (author) [pt

What is the γγ resonance at 750 GeV?

Energy Technology Data Exchange (ETDEWEB)

Franceschini, Roberto; Giudice, Gian F. [CERN, Theory Division,CH-1211 Geneva 23 (Switzerland); Kamenik, Jernej F. [CERN, Theory Division,CH-1211 Geneva 23 (Switzerland); Jožef Stefan Institute,Jamova 39, 1000 Ljubljana (Slovenia); Faculty of Mathematics and Physics, University of Ljubljana,Jadranska 19, 1000 Ljubljana (Slovenia); McCullough, Matthew [CERN, Theory Division,CH-1211 Geneva 23 (Switzerland); Pomarol, Alex [CERN, Theory Division,CH-1211 Geneva 23 (Switzerland); Departament de Física and IFAE-BIST, Universitat Autònoma de Barcelona, 08193 Bellaterra, Barcelona (Spain); Rattazzi, Riccardo [Institut de Théorie des Phénomènes Physiques, EPFL,Route de la Sorge, CH-1015 Lausanne (Switzerland); Redi, Michele [INFN, Sezione di Firenze,Via G. Sansone, 1, I-50019 Sesto Fiorentino (Italy); Riva, Francesco [CERN, Theory Division,CH-1211 Geneva 23 (Switzerland); Strumia, Alessandro [CERN, Theory Division,CH-1211 Geneva 23 (Switzerland); Dipartimento di Fisica dell’Università di Pisa and INFN,Largo Bruno Pontecorvo 3, 56127 Pisa (Italy); Torre, Riccardo [Institut de Théorie des Phénomènes Physiques, EPFL,Route de la Sorge, CH-1015 Lausanne (Switzerland)

2016-03-21

Run 2 LHC data show hints of a new resonance in the diphoton distribution at an invariant mass of 750 GeV. We analyse the data in terms of a new boson, extracting information on its properties and exploring theoretical interpretations. Scenarios covered include a narrow resonance and, as preliminary indications suggest, a wider resonance. If the width indications persist, the new particle is likely to belong to a strongly-interacting sector. We also show how compatibility between Run 1 and Run 2 data is improved by postulating the existence of an additional heavy particle, whose decays are possibly related to dark matter.

Development of 750 keV/20kW DC accelerator

International Nuclear Information System (INIS)

Bapna, S.C.; Banwari, R.; Venkateswaran, S.V.; Tripathi, Alok; Kasliwal, Apollo; Pramod, R.; Kumar, Pankaj

2001-01-01

This paper discusses development of a DC accelerator at CAT for industrial applications. This accelerator is housed in two floors; first floor having the accelerator and the ground floor is an irradiation cell. It will operate in the voltage range of 300kV to 750kV and will give maximum beam power of 20kW. The electron gun, acceleration column, focusing coil, high voltage multiplier stack, filament power supply and the control unit are housed in a 1.5 m diameter 3.2 m high pressure vessel which will be pressurized to 5.5 bar of SF 6 gas

Use of labeled ions to determine the effect of APS-750 on liver and kidney physiology in vertebrates

International Nuclear Information System (INIS)

Navarrete, J.M.; Gracia, I.; Fabila, L.; Urbina, V.M.; Flores, J.C.

2009-01-01

Mineral ions 45 Ca ++ and 32 PO 4 - seem to be filtered in greater amounts by organic tissues of plants and mice when they are mixed with APS-750, a commercial product developed in Mexico, as a dietary complement for breeding animals. This work compares the concentration of both ions in blood serum and urine of mice, finding that the circulation and excretion rate of these electrolytes is much faster if they are mixed with APS-750, which seems to be the starting point to develop the good properties showed by this product as health promoter in vertebrates. (author)

Comparison of platelet counts by sysmex XE 2100 and LH-750 with the international flow reference method in thrombocytopenic patients

Directory of Open Access Journals (Sweden)

Tina Dadu

2013-01-01

Full Text Available Background: There are several methods for counting platelets, of which the international flow reference method (IRM is considered to be the gold standard. We compared the platelet count given by this method to the count given by automated analyzers using other methods, such as optical fluorescence and impedance. Aims: The aim of this study is to compare the platelet counts obtained by Sysmex XE 2100 by Impedance (Sysmex-I, optical florescence (Sysmex-O and reported (Sysmex-R based on the switching algorithm and LH-750 by Impedance (LH-750 with the IRM in thrombocytopenic blood samples. To calculate the sensitivity, specificity, positive predictive value (PPV and negative predictive value (NPV of various technologies at the clinically relevant transfusion thresholds of 10 × 10 9 /l and 20 × 10 9 /l. Materials and Methods: A total of 118 blood samples with platelet count of <50 × 10 9 /l were selected for the study. Platelet counts of all samples were analyzed by all methods using the Sysmex analyzer, LH-750 and IRM in parallel within 6 h of collection. Statistical Analysis Used: Pearson correlation, bland Altman analysis, sensitivity and specificity, PPV and NPV. Results and Conclusions: Sysmex-R had the least Bias and 95% limits of agreement (95%LA range and thus correlated best with IRM values. LH-750 had a higher Bias compared to Sysmex-O and Sysmex-R, but a strikingly similar 95% LA ensures similar results in all three methods. In fact, in the oncology subset, it had the narrowest 95% LA, which made it the best performer in this subgroup. Of the three Sysmex results, Sysmex-I had the highest bias, widest 95% LA and highest potential risk of over transfusion. Hence, Sysmex-R and LH-750 were found to be reliable tools for estimation of platelet count in thrombocytopenic patients.

23 CFR 750.706 - Sign control in zoned and unzoned commercial and industrial areas.

Science.gov (United States)

2010-04-01

... TRANSPORTATION RIGHT-OF-WAY AND ENVIRONMENT HIGHWAY BEAUTIFICATION Outdoor Advertising Control § 750.706 Sign... spacing of outdoor advertising signs located in commercial or industrial zoned or unzoned areas, as... back-to-back or “V” type signs. (c) Where the agreement and State law permits control by local zoning...

AC transmission, with very high voltages and the 750 kV line

Energy Technology Data Exchange (ETDEWEB)

Bocker, H

1964-01-01

The economic case for adoption of extra-high voltages for transmitting electric power over distances of the order of 1000 km is discussed. Some special technical developments for solving the problems attached to such high voltages are briefly discussed, particularly in the fields of switching and transients suppression. The first 750-kV projects in Canada and Russia are mentioned. Equipment, e.g., bushings, transformers, etc., operating at such voltages are illustrated.

Consumer Airfare Report: Table 5 - Detailed Fare Information For Highest and Lowest Fare Markets Under 750 Miles

Data.gov (United States)

Department of Transportation — Provides detailed fare information for highest and lowest fare markets under 750 miles. For a more complete explanation, please read the introductory information at...

Modelling of hydrogen assisted cracking of nickel-base Alloy X-750 in water

International Nuclear Information System (INIS)

Oka, T.; Ballinger, R.G.; Hwang, I.S.

1992-01-01

A closed-form, semi-empirical, electrochemical model has been developed to rationalize the intergranular corrosion fatigue behavior of alloy X-750 in aqueous electrolytes. The model is based on the assumption that, in the electrolytes investigated and for the microstructures studied, that hydrogen assisted crack growth is the dominant mechanism. Further, it is assumed that the rate of hydrogen reduction is a controlling factor in the magnitude of the environmental component of crack growth. Electrolyte conductivity, dissolution and passivation kinetics of precipitates, grain boundary coverage of precipitates are identified as important environmental and microstructural variables governing the hydrogen reduction rate at the crack tip. The model is compared with experimental data for fatigue crack growth where hydrogen is supplied by external charging and with data where galvanically-generated local hydrogen is responsible for enhanced crack growth. It is shown that predicted results characterize the observed effects of frequency, microstructure, electrolyte conductivity, and stress intensity factor. The agreement between the hydrogen reduction model and measured crack growth rate is believed to support the proposed galvanic corrosion mechanism for the intergranular cracking of alloy X-750 in low temperature water

Symmetries and composite dynamics for the 750 GeV diphoton excess

DEFF Research Database (Denmark)

Franzosi, Diogo Buarque; Frandsen, Mads T.

2018-01-01

of a pseudo-scalar via gluon or photon fusion or via decay of a parent particle together with soft additional final states. We discuss possible underlying realizations of the scenarios motivated by dynamical models of electroweak symmetry breaking (without new coloured states) and fermion masses.......The ATLAS and CMS experiments at LHC observe small excesses of diphoton events with invariant mass around 750 GeV. Here we study the possibility of nearly parity degenerate and vector-scalar degenerate spectra as well as composite dynamics in 2 scenarios for explaining the excess: Production...

Study of 750 J plasma coaxial accelerator

International Nuclear Information System (INIS)

Mehanna, E.A.; Hassouba, M.A; Abd al-halim, M.A.

2009-01-01

A 750 J plasma coaxial accelerator is used to produce plasma using air at 0.2 torr pressure and 8 kv charging voltage. The discharge current and voltage traces showed that the total circuit inductance was about 1750 μH. The experimental results showed that the plasma sheath reached the muzzle after 6 μs with velocity equal to 4 cm/μs, after then it decreased, while the simulation model showed that the plasma sheath reaches the muzzle with velocity of 3 cm/μs and after one microsecond it increases to reach about 4 cm/μs after 12 μs then it decreased. The plasma temperature measurements showed that the plasma sheath reached the muzzle with temperature of about 9 eV and increase to reach about 12 eV after 8.5 μs then after it decrease. The simulation model showed that the plasma temperature at the muzzle is about 10.5 eV and continue to increase to reach 17.5 eV after 12 μs then it decrease

Development of scanning magnet for 750 keV DC accelerator

International Nuclear Information System (INIS)

Pramod, R.; Pankaj Kumar; Venkateswaran, S.V.; Bapna, S.C.

2003-01-01

In the radiation processing technologies, the surface to be irradiated has to be as large as possible, but keeping a good uniformity of the absorbed dose. To attain such a goal, the beam should be scanned in a plane perpendicular on the displacement of the conveyor belt. Therefore, scanning magnets are necessary. A scanning magnet should ensure the homogeneity of the absorbed dose (and, similarly, of the beam current distribution) on the items to be irradiated. In this paper some simple relations needed in the design of the scanning magnets are deduced, the design and fabrication aspects of the scanning magnet for the 750 keV DC accelerator are discussed

Effect of growth temperature on defects in epitaxial GaN film grown by plasma assisted molecular beam epitaxy

Directory of Open Access Journals (Sweden)

S. S. Kushvaha

2014-02-01

Full Text Available We report the effect of growth temperature on defect states of GaN epitaxial layers grown on 3.5 μm thick GaN epi-layer on sapphire (0001 substrates using plasma assisted molecular beam epitaxy. The GaN samples grown at three different substrate temperatures at 730, 740 and 750 °C were characterized using atomic force microscopy and photoluminescence spectroscopy. The atomic force microscopy images of these samples show the presence of small surface and large hexagonal pits on the GaN film surfaces. The surface defect density of high temperature grown sample is smaller (4.0 × 108 cm−2 at 750 °C than that of the low temperature grown sample (1.1 × 109 cm−2 at 730 °C. A correlation between growth temperature and concentration of deep centre defect states from photoluminescence spectra is also presented. The GaN film grown at 750 °C exhibits the lowest defect concentration which confirms that the growth temperature strongly influences the surface morphology and affects the optical properties of the GaN epitaxial films.

Efficiency of the DOMUS 750 vertical-axis wind turbine

Science.gov (United States)

Hallock, Kyle; Rasch, Tyler; Ju, Guoqiang; Alonso-Marroquin, Fernando

2017-06-01

The aim of this paper is to present some preliminary results on the efficiency of a wind turbine for an off-grid housing unit. To generate power, the unit uses a photovoltaic solar array and a vertical-axis wind turbine (VAWT). The existing VAWT was analysed to improve efficiency and increase power generation. There were found to be two main sources of inefficiency: 1. the 750W DC epicyclic generator performed poorly in low winds, and 2. the turbine blades wobbled, allowing for energy loss due to off-axis rotation. A 12V DC permanent magnet alternator was chosen that met the power requirements of the housing unit and would generate power at lower wind speeds. A support bracket was designed to prevent the turbine blades from wobbling.

Surface chemistry, microstructure and friction properties of some ferrous-base metallic glasses at temperatures to 750 C

Science.gov (United States)

Miyoshi, K.; Buckley, D. H.

1982-01-01

X-ray photoelectron spectroscopy analysis, transmission electron microscopy, diffraction studies, and sliding friction experiments were conducted with ferrous-base metallic glasses in sliding contact with aluminum oxide at temperatures from room to 750 C in a vacuum of 30 nPa. The results indicate that there is a significant temperature influence on the friction properties, surface chemistry, and microstructure of metallic glasses. The relative concentrations of the various constituents at the surface of the sputtered specimens were very different from the normal bulk compositions. Contaminants can come from the bulk of the material to the surface upon heating and impart boric oxide and silicon oxide at 350 C and boron nitride above 500 C. The coefficient of friction increased with increasing temperature to 350 C. Above 500 C the coefficient of friction decreased rapidly. The segregation of contaminants may be responsible for the friction behavior.

Effect of heat treatment on the temperature dependence of the fracture behavior of X-750 alloy

Energy Technology Data Exchange (ETDEWEB)

Marsh, C.; Depinoy, S. [University of South Carolina (United States); Kaoumi, D. [North Carolina State University (United States)

2016-11-20

X-750 is a nickel-chromium based super alloy of usefulness in a wide variety of applications such as gas turbines, rocket engines, nuclear reactors, pressure vessels, tooling, and aircraft structures. Its good mechanical properties are due to the strengthening from precipitation of γ′ particles upon prior ageing heat treatment. In this work, the effect of such heat treatment on the fracture mechanisms of X-750 was studied at various temperatures by comparing it with a non-aged, solution annealed X-750. Tensile tests were conducted from room temperatures up to 900 °C; fracture surfaces were analyzed by means of SEM observations. In addition, the microstructure of both aged and solution annealed materials were studied using SEM and TEM, both on as received and on tested specimens. In terms of mechanical properties, as expected, the yield strength and the ultimate tensile strength of the aged material were better than for the solution-annealed one, and only slightly decreased with increasing temperature when tested between room temperatures and 650 °C. In this range of temperature, the fracture surface of aged material evolves from purely intergranular to purely transgranular due to the thermal activation of dislocation mobility that relieves the stress at the grain boundaries, while the rupture of the solution annealed material is due to the coalescence of voids induced by decohesion at the MC carbides/matrix interface. At higher temperatures, precipitation of γ’ particles upon testing of the solution-annealed material leads to a temperature-dependent increase in both yield strength and ultimate tensile strength, which nevertheless remain below the aged material ones with the exception of the higher temperatures. At the same time, an overall decrease of the aged material mechanical properties is observed. Minimum ductility was observed at 750 °C for both solution annealed and aged specimen, due to the oxidation of grain boundaries leading to an

Defect microstructure in copper alloys irradiated with 750 MeV protons

DEFF Research Database (Denmark)

Zinkle, S.J.; Horsewell, A.; Singh, B.N.

1994-01-01

Transmission electron microscopy (TEM) disks of pure copper and solid solution copper alloys containing 5 at% of Al, Mn, or Ni were irradiated with 750 MeV protons to damage levels between 0.4 and 2 displacements per atom (dpa) at irradiation temperatures between 60 and 200 degrees C. The defect...... significant effect on the total density of small defect clusters, but they did cause a significant decrease in the fraction of defect clusters resolvable as SFT to similar to 20 to 25%. In addition, the dislocation loop density (> 5 nm diameter) was more than an order of magnitude higher in the alloys...

Instalación de baja tensión en un hotel de 5 estrellas

OpenAIRE

Salvador Fernández, Enric

2010-01-01

En este proyecto se propone el diseño de la instalación eléctrica de baja tensión de un edificio clasificado como residencial, destinado exclusivamente a hotel y cualificado como 5 estrellas. El edificio dispone de una superficie total de 18.500 m2 aproximadamente, cuatro edificios independientes y un total de 178 habitaciones. Para dar servicio a las instalaciones se contratará inicialmente, un suministro de 750 kW en media tensión. La alimentación del hotel se obtendrá de dos...

750V DC substation facility of electric railway for PUTRA, Malaysia; Malaysia PUTRA muke DC750V dentetsuyo chokuryu henden setsubi

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-02-29

The first subway was put into full service operation in Kuara Lumpur, Malaysia on July 21. This east-west subway of 29km runs from Kelana Jaya through the downtown KLCC famous for the twin tower to Terminal PUTRA including 24 stations. As power facilities for the electric railway, 2 receiving substations and 13 DC substations were provided. The subway transforms voltage from 132kV to 33kV at the receiving substations, and from AC 33kV to DC 750V at the DC substations to supply power to trains. Features of these facilities are as follows. (1) Gas-insulated switchgears (GIS) and silicon oil-filled transformers are adopted from the viewpoint of disaster prevention. (2) Regenerative power from trains is consumed by the regenerative resistance equipment (resistor control using GTO device) installed in the substations. (3) The fourth-rail system is adopted as current collection system of trains. (translated by NEDO)

Effect of temperature on the elastic-plastic fracture toughness behavior of Inconel X-750

International Nuclear Information System (INIS)

Mills, W.J.

1977-09-01

The elastic-plastic J/sub Ic/ fracture toughness response of precipitation heat treated Inconel X-750 has been evaluated by the multi-specimen resistance curve (R-curve) technique at room temperature, 800 0 F (427 0 C), and 1000 0 F (538 0 C). The value of J/sub Ic/ for this nickel-base superalloy was found to be relatively independent of temperature over the test temperature range. On the other hand, the slopes of the fracture toughness R-curves were steeper at 800 and 1000 0 F (427 and 538 0 C) than at 75 0 F (24 0 C), thereby indicating that the resistance to crack extension was considerably greater at elevated temperatures, Metallographic and electron fractographic examination of the Inconel X-750 fracture surfaces revealed that this slope change phenomenon was associated with an intergranular to transgranular fracture mechanism transition. Under room temperature conditions, crack extension occurred primarily by an intergranular dimple rupture mechanism attributed to microvoid coalescence along a grain boundary denuded region. In the 800 to 1000 0 F (427 to 538 0 C) regime, the fracture surface was dominated by a faceted transgranular morphology

Structural characterization of Mn implanted AlInN

Energy Technology Data Exchange (ETDEWEB)

Majid, Abdul; Ali, Akbar [Advance Materials Physics Laboratory, Quaid-i-Azam University, Islamabad (Pakistan); Zhu, J J; Wang, Y T [State Key Laboratory on Integrated Optoelectronics, Institute of Semiconductor, Chinese Academy of Sciences, Beijing 100083 (China)], E-mail: abdulmajid40@yahoo.com, E-mail: akbar@qau.edu.pk

2008-06-07

AlInN/GaN thin films were implanted with Mn ions and subsequently annealed isochronically at 750 and 850 deg. C. X-ray diffraction and Rutherford backscattering spectroscopy (RBS) techniques were employed to study the microstructural properties of the implanted/annealed samples. The effect of annealing on implantation-induced strain in thin films has been studied in detail. The strain was found to increase with dose until it reached a saturation value and after that it started decreasing with a further increase in the dose. RBS measurements indicated the atomic diffusion of In, Al, Ga and Mn in implanted samples. The in- and out-diffusion of atoms has been observed after annealing at 750 deg. C and 850 deg. C, respectively. Strong decomposition of the samples took place when annealed at 850 deg. C.

Structural characterization of Mn implanted AlInN

International Nuclear Information System (INIS)

Majid, Abdul; Ali, Akbar; Zhu, J J; Wang, Y T

2008-01-01

AlInN/GaN thin films were implanted with Mn ions and subsequently annealed isochronically at 750 and 850 deg. C. X-ray diffraction and Rutherford backscattering spectroscopy (RBS) techniques were employed to study the microstructural properties of the implanted/annealed samples. The effect of annealing on implantation-induced strain in thin films has been studied in detail. The strain was found to increase with dose until it reached a saturation value and after that it started decreasing with a further increase in the dose. RBS measurements indicated the atomic diffusion of In, Al, Ga and Mn in implanted samples. The in- and out-diffusion of atoms has been observed after annealing at 750 deg. C and 850 deg. C, respectively. Strong decomposition of the samples took place when annealed at 850 deg. C

Soot and Spectral Radiation Modeling for a High-Pressure Turbulent Spray Flame

Energy Technology Data Exchange (ETDEWEB)

Ferreryo-Fernandez, Sebastian [Pennsylvania State Univ., University Park, PA (United States); Paul, Chandan [Pennsylvania State Univ., University Park, PA (United States); Sircar, Arpan [Pennsylvania State Univ., University Park, PA (United States); Imren, Abdurrahman [Pennsylvania State Univ., University Park, PA (United States); Haworth, Daniel C [Pennsylvania State Univ., University Park, PA (United States); Roy, Somesh P [Marquette University (United States); Modest, Michael F [University of California Merced (United States)

2017-04-26

Simulations are performed of a transient high-pressure turbulent n-dodecane spray flame under engine-relevant conditions. An unsteady RANS formulation is used, with detailed chemistry, a semi-empirical two-equation soot model, and a particle-based transported composition probability density function (PDF) method to account for unresolved turbulent fluctuations in composition and temperature. Results from the PDF model are compared with those from a locally well-stirred reactor (WSR) model to quantify the effects of turbulence-chemistry-soot interactions. Computed liquid and vapor penetration versus time, ignition delay, and flame lift-off height are in good agreement with experiment, and relatively small differences are seen between the WSR and PDF models for these global quantities. Computed soot levels and spatial soot distributions from the WSR and PDF models show large differences, with PDF results being in better agreement with experimental measurements. An uncoupled photon Monte Carlo method with line-by-line spectral resolution is used to compute the spectral intensity distribution of the radiation leaving the flame. This provides new insight into the relative importance of molecular gas radiation versus soot radiation, and the importance of turbulent fluctuations on radiative heat transfer.

40 CFR Appendix A to Subpart A of... - Appendix A to Subpart A of Part 750

Science.gov (United States)

2010-07-01

...) TOXIC SUBSTANCES CONTROL ACT PROCEDURES FOR RULEMAKING UNDER SECTION 6 OF THE TOXIC SUBSTANCES CONTROL ACT Procedures for Rulemaking Under Section 6 of the Toxic Substances Control Act Pt. 750, Subpt. A.... The second column gives the relationship that one date bears to another whenever that relationship is...

Effects of the aging temperature and stress relaxation conditions on γ′ precipitation in Inconel X-750

Energy Technology Data Exchange (ETDEWEB)

Ha, Jeong Won [Department of Materials Science and Engineering, Pusan National University, Busan 609-735 (Korea, Republic of); Research and Development Center, KOS Limited, Yangsan 626-230 (Korea, Republic of); Seong, Baek Seok [Neutron Science Division, HANARO Center, Korea Atomic Energy Research Institute, Daejeon 305-353 (Korea, Republic of); Jeong, Hi Won [Advanced Metallic Materials Division, Korea Institute of Materials Science, Changwon 642-831 (Korea, Republic of); Choi, Yoon Suk [Department of Materials Science and Engineering, Pusan National University, Busan 609-735 (Korea, Republic of); Kang, Namhyun, E-mail: nhkang@pusan.ac.kr [Department of Materials Science and Engineering, Pusan National University, Busan 609-735 (Korea, Republic of)

2015-02-15

Highlights: • Stress relaxation after aging 620 °C increased carbides and maintained γ′ fraction. • Aging temperature increase to 732 °C raised the γ′ increment after stress relaxation. • Small increase of carbides induced the large increase of γ′ after stress relaxation. • Loading for stress relaxation raised γ′ increment due to dislocation multiplication. - Abstract: Inconel X-750 is a Ni-based precipitation-hardened superalloy typically used in springs designed for high-temperature applications such as the hold-down springs in nuclear power plants. γ′ is a major precipitate in X-750 alloys which affects the strength, creep resistance, and stress relaxation properties of the spring. In this study, a solution-treated X-750 wire coiled into a spring was used that was aged at various temperatures and submitted to stress relaxation tests with and without loading. Small angle neutron scattering was employed to quantify the size and volume fraction of γ′ phase in the springs as a function of the aging temperature and the application of a load during stress relaxation. The volume fraction of γ′ precipitates increased in the specimen aged at 732 °C following stress relaxation at 500 °C for 300 h. However, the mean size of the precipitates in the samples was not affected by stress relaxation. The specimen aged at the lower temperature (620 °C) contained a smaller γ′ volume fraction and gained a smaller fraction of γ′ during stress relaxation compared with the sample aged at the higher temperature (732 °C). The smaller increase in the γ′ volume fraction for the sample aged at 620 °C was associated with a larger increase in the M{sub 23}C{sub 6} secondary carbide content during relaxation. The Cr depletion zone around the secondary carbides raises the solubility of γ′ thereby decreasing the volume fraction of γ′ precipitates in Inconel X-750. In terms of stress relaxation, a larger increase in the γ′ volume fraction was

RF Measurements and Tuning of the 750 MHz HF-RFQ

CERN Document Server

Koubek, Benjamin; Timmins, Marc; CERN. Geneva. ATS Department

2017-01-01

In the frame of the program on medical applications CERN has built a compact 750 MHz RFQ to be used as an injector for a hadron therapy linac. This RFQ was designed to accelerate protons to an energy of 5 {\\lambda} MeV within only 2 m length. It is divided into four segments and equipped with 32 tuners in total. The length of the RFQ corresponds to 5 which is considered to be close to the limit for field adjustment using only piston tuners. Moreover the high frequency, which is about double the frequency of existing RFQs, results in a sensitive structure and requires careful tuning by means of the alignment of the pumping ports and fixed tuners. This report summarises the tuning procedure, RF and bead pull measurements of the RFQ.

Water absorption and mechanical properties of water-swellable natural rubber

Directory of Open Access Journals (Sweden)

Diew Saijun

2009-11-01

Full Text Available Water-swellable rubber (WSR was prepared by blending superabsorbent polymer (SAP of crosslinked poly(acrylamide-co-sodium acrylate with natural rubber in latex condition. The crosslinked poly(acrylamide-co-sodium acrylate was first prepared by inverse suspension polymerization from acrylamide and sodium acrylate monomers with potassiumpersulfate initiator and N,N-methylenebisacrylamide crosslinker. The reaction was carried out at 60oC for 40 mins. Water absorption properties, such as the degree of water absorption, water absorption rate, degree of weight loss, and mechanicalproperties of WSR were then investigated. It was found that the degree of water absorption, water absorption rate, and thedegree of weight loss increased, while tensile strength and elongation at break decreased with increasing quantity of SAP inthe blends. However, the degree of water absorption, degree of weight loss, and elongation at break decreased, but tensilestrength increased with increasing quantity of the N-tert-butyl-2-benzothiazyl sulphenamide (TBBS accelerator used in thecompounds formulation.

Fe/N/C hollow nanospheres by Fe(iii)-dopamine complexation-assisted one-pot doping as nonprecious-metal electrocatalysts for oxygen reduction

Science.gov (United States)

Zhou, Dan; Yang, Liping; Yu, Linghui; Kong, Junhua; Yao, Xiayin; Liu, Wanshuang; Xu, Zhichuan; Lu, Xuehong

2015-01-01

In this work, a series of hollow carbon nanospheres simultaneously doped with N and Fe-containing species are prepared by Fe3+-mediated polymerization of dopamine on SiO2 nanospheres, carbonization and subsequent KOH etching of the SiO2 template. The electrochemical properties of the hollow nanospheres as nonprecious-metal electrocatalysts for oxygen reduction reaction (ORR) are characterized. The results show that the hollow nanospheres with mesoporous N-doped carbon shells of ~10 nm thickness and well-dispersed Fe3O4 nanoparticles prepared by annealing at 750 °C (Fe/N/C HNSs-750) exhibit remarkable ORR catalytic activity comparable to that of a commercial 20 wt% Pt/C catalyst, and high selectivity towards 4-electron reduction of O2 to H2O. Moreover, it displays better electrochemical durability and tolerance to methanol crossover effect in an alkaline medium than the Pt/C. The excellent catalytic performance of Fe/N/C HNSs-750 towards ORR can be ascribed to their high specific surface area, mesoporous morphology, homogeneous distribution of abundant active sites, high pyridinic nitrogen content, graphitic nitrogen and graphitic carbon, as well as the synergistic effect of nitrogen and iron species for catalyzing ORR.In this work, a series of hollow carbon nanospheres simultaneously doped with N and Fe-containing species are prepared by Fe3+-mediated polymerization of dopamine on SiO2 nanospheres, carbonization and subsequent KOH etching of the SiO2 template. The electrochemical properties of the hollow nanospheres as nonprecious-metal electrocatalysts for oxygen reduction reaction (ORR) are characterized. The results show that the hollow nanospheres with mesoporous N-doped carbon shells of ~10 nm thickness and well-dispersed Fe3O4 nanoparticles prepared by annealing at 750 °C (Fe/N/C HNSs-750) exhibit remarkable ORR catalytic activity comparable to that of a commercial 20 wt% Pt/C catalyst, and high selectivity towards 4-electron reduction of O2 to H2O

Gasificación con CO2 de carbonizados de aserrín de Pinus caribaea Morelet var. cariba

OpenAIRE

F. Márquez-Montesino; T. Cordero-Alcántara; J. Rodríguez-Mirasol; J. J. Rodríguez-Jiménez

2004-01-01

Dada la importancia del estudio de la reactividad de los carbones con el fin de estudiar su activación, se desarrolló la gasificación con CO2 de un carbón obtenido de aserrín de Pinus caribaea. Los ensayos termogravimétricos se realizaron en un sistema modular de CI Electronics, las temperaturas de gasificación escogidas fueron 750, 775, 800 y 825 °C. Para calcular los valores de reactividad normalizada, se determinó el área de superficie por adsorción de CO2 a 273 K, en un equipo Au...

Method of selecting optimum cross arm lengths for a 750 kV transmission line

Energy Technology Data Exchange (ETDEWEB)

Aleksandrov, G N; Olorokov, V P

1965-01-01

A method is presented, based on both technical and economic considerations, for selecting cross arm lengths for intermediate poles of power transmission lines according to the effects of internal overvoltage, methods from probability theory and mathematical statistics employed. The problem of optimum pole size is considered in terms of the effect of internal overvoltages for a prescribed maximum level of 2.1 PU currently used in the USSR for the design of 750 kV lines.

High-power cw laser bars of the 750 – 790-nm wavelength range

International Nuclear Information System (INIS)

Degtyareva, N S; Kondakov, S A; Mikayelyan, G T; Gorlachuk, P V; Ladugin, M A; Marmalyuk, Aleksandr A; Ryaboshtan, Yu L; Yarotskaya, I V

2013-01-01

We have developed the effective design of semiconductor heterostructures, which allow one to fabricate cw laser diodes emitting in the 750 – 790-nm spectral range. The optimal conditions for fabrication of GaAsP/AlGaInP/GaAs heterostructures by MOCVD have been determined. It is shown that the use of quantum wells with a precisely defined quantity mismatch reduces the threshold current density and increases the external differential efficiency. The results of studies of characteristics of diode laser bars fabricated from these heterostructures are presented. (lasers)

Defining a Conceptual Topography of Word Concreteness: Clustering Properties of Emotion, Sensation, and Magnitude among 750 English Words

Directory of Open Access Journals (Sweden)

Joshua Troche

2017-10-01

Full Text Available Cognitive science has a longstanding interest in the ways that people acquire and use abstract vs. concrete words (e.g., truth vs. piano. One dominant theory holds that abstract and concrete words are subserved by two parallel semantic systems. We recently proposed an alternative account of abstract-concrete word representation premised upon a unitary, high dimensional semantic space wherein word meaning is nested. We hypothesize that a range of cognitive and perceptual dimensions (e.g., emotion, time, space, color, size, visual form bound this space, forming a conceptual topography. Here we report a normative study where we examined the clustering properties of a sample of English words (N = 750 spanning a spectrum of concreteness in a continuous manner from highly abstract to highly concrete. Participants (N = 328 rated each target word on a range of 14 cognitive dimensions (e.g., color, emotion, valence, polarity, motion, space. The dimensions reduced to three factors: Endogenous factor, Exogenous factor, and Magnitude factor. Concepts were plotted in a unified, multimodal space with concrete and abstract concepts along a continuous continuum. We discuss theoretical implications and practical applications of this dataset. These word norms are freely available for download and use at http://www.reilly-coglab.com/data/.

Defining a Conceptual Topography of Word Concreteness: Clustering Properties of Emotion, Sensation, and Magnitude among 750 English Words.

Science.gov (United States)

Troche, Joshua; Crutch, Sebastian J; Reilly, Jamie

2017-01-01

Cognitive science has a longstanding interest in the ways that people acquire and use abstract vs. concrete words (e.g., truth vs. piano). One dominant theory holds that abstract and concrete words are subserved by two parallel semantic systems. We recently proposed an alternative account of abstract-concrete word representation premised upon a unitary, high dimensional semantic space wherein word meaning is nested. We hypothesize that a range of cognitive and perceptual dimensions (e.g., emotion, time, space, color, size, visual form) bound this space, forming a conceptual topography. Here we report a normative study where we examined the clustering properties of a sample of English words ( N = 750) spanning a spectrum of concreteness in a continuous manner from highly abstract to highly concrete. Participants ( N = 328) rated each target word on a range of 14 cognitive dimensions (e.g., color, emotion, valence, polarity, motion, space). The dimensions reduced to three factors: Endogenous factor, Exogenous factor, and Magnitude factor. Concepts were plotted in a unified, multimodal space with concrete and abstract concepts along a continuous continuum. We discuss theoretical implications and practical applications of this dataset. These word norms are freely available for download and use at http://www.reilly-coglab.com/data/.

Application of the associated particle method to the determination of the efficiency of an NE 213 detection assembly with 750 keV neutrons. Utilization of a velocity filter

International Nuclear Information System (INIS)

Becret, Claude.

1979-01-01

This report presents the calibration of a neutron detection set, fitted with an NE 213 organic scintillator. This calibration uses the associated particle method, by means of the 3 T(p,n) 3 He reaction producing 750 keV neutrons. A separator device, of the velocity filter type, is employed for separating the heliums -emitted during the 3 T(p,n) 3 He neutron generating reaction- from the charged particles emanating from competing or spurious reactions. The calibration of this set enables neutron fluences of between 700 keV and 1 MeV in energy to be determined. The knowledge of such fluences is essential for dosimetry studies and for determining the sensitivity of weapons systems or components to nuclear radiation effects [fr

Broadband semiconductor optical amplifiers of the spectral range 750 – 1100 nm

International Nuclear Information System (INIS)

Andreeva, E V; Il'chenko, S N; Lobintsov, A A; Shramenko, M V; Ladugin, M A; Marmalyuk, A A; Yakubovich, S D

2013-01-01

A line of travelling-wave semiconductor optical amplifiers (SOAs) based on heterostructures used for production of broadband superluminescent diodes is developed. The pure small-signal gains of the developed SOA modules are about 25 dB, while the gain bandwidths at a level of –10 dB reach 50 – 100 nm. As a whole, the SOA modules cover the IR spectral range from 750 to 1100 nm. The SOAs demonstrate a high reliability at a single-mode fibre-coupled cw output power up to 50 mW. Examples of application of two of the developed SOA modules as active elements of broadband fast-tunable lasers are presented. (lasers)

Broadband semiconductor optical amplifiers of the spectral range 750 – 1100 nm

Energy Technology Data Exchange (ETDEWEB)

Andreeva, E V; Il' chenko, S N; Lobintsov, A A; Shramenko, M V [Superlum Diodes Ltd., Moscow (Russian Federation); Ladugin, M A [' Sigm Plyus' Ltd, Moscow (Russian Federation); Marmalyuk, A A [Open Joint-Stock Company M.F. Stel' makh Polyus Research Institute, Moscow (Russian Federation); Yakubovich, S D [Moscow State Institute of Radio-Engineering, Electronics and Automation (Technical University), Moscow (Russian Federation)

2013-11-30

A line of travelling-wave semiconductor optical amplifiers (SOAs) based on heterostructures used for production of broadband superluminescent diodes is developed. The pure small-signal gains of the developed SOA modules are about 25 dB, while the gain bandwidths at a level of –10 dB reach 50 – 100 nm. As a whole, the SOA modules cover the IR spectral range from 750 to 1100 nm. The SOAs demonstrate a high reliability at a single-mode fibre-coupled cw output power up to 50 mW. Examples of application of two of the developed SOA modules as active elements of broadband fast-tunable lasers are presented. (lasers)

rf measurements and tuning of the 750 MHz radio frequency quadrupole

Science.gov (United States)

Koubek, Benjamin; Grudiev, Alexej; Timmins, Marc

2017-08-01

In the framework of the program on medical applications a compact 750 MHz RFQ has been designed and built to be used as an injector for a hadron therapy linac. This RFQ was designed to accelerate protons to an energy of 5 MeV within only 2 m length. It is divided into four segments and equipped with 32 tuners in total. The length of the RFQ corresponds to 5 λ which is considered to be close to the limit for field adjustment using only piston tuners. Moreover the high frequency, which is about double the frequency of existing RFQs, results in a sensitive structure and requires careful tuning. In this paper we present the tuning algorithm, the tuning procedure and rf measurements of the RFQ.

A 750 GeV portal: LHC phenomenology and dark matter candidates

Energy Technology Data Exchange (ETDEWEB)

D’Eramo, Francesco [Department of Physics, University of California Santa Cruz, 1156 High St., Santa Cruz, CA 95064 (United States); Santa Cruz Institute for Particle Physics, 1156 High St., Santa Cruz, CA 95064 (United States); Vries, Jordy de [Nikhef, Theory Group, Science Park 105, 1098 XG, Amsterdam (Netherlands); Panci, Paolo [Institut d’Astrophysique de Paris, UMR 7095 CNRS, Université Pierre et Marie Curie, 98 bis Boulevard Arago, Paris 75014 (France)

2016-05-16

We study the effective field theory obtained by extending the Standard Model field content with two singlets: a 750 GeV (pseudo-)scalar and a stable fermion. Accounting for collider productions initiated by both gluon and photon fusion, we investigate where the theory is consistent with both the LHC diphoton excess and bounds from Run 1. We analyze dark matter phenomenology in such regions, including relic density constraints as well as collider, direct, and indirect bounds. Scalar portal dark matter models are very close to limits from direct detection and mono-jet searches if gluon fusion dominates, and not constrained at all otherwise. Pseudo-scalar models are challenged by photon line limits and mono-jet searches in most of the parameter space.

Tratamiento del enfisema intersticial pulmonar unilateral con ventilación monopulmonar contralateral: Presentación de 1 caso

OpenAIRE

González Alonso, María Victoria; Mesa Riquelme, . Luis Antonio; Domínguez Dieppa, Fernando; Porto Rodríguez, Aida Silvia

1998-01-01

Se presenta el caso de un recién nacido de 750 g de peso y 27 semanas de edad gestacional, que durante su evolución en la asistencia respiratoria mecánica, presentó enfisema intersticial pulmonar a tensión en el pulmón derecho, el cual producía desplazamiento mediastinal y pobre aereación del pulmón izquierdo. La subsecuente hipercapnia hizo fracasar todos los intentos de disminuir la presión inspiratoria en la vía aérea proximal y el enfisema intersticial fue empeorando. A los 6 días de vida...

Recubrimientos protectores de TiN y AIN: comportamiento frente a temperatura

Directory of Open Access Journals (Sweden)

Auger, M. A.

2006-04-01

Full Text Available The use of ceramic materials like titanium and aluminium nitrides have experienced a great improvement in the last years due to the variety of applications they show. The use as protective coatings on industrial tools is one important application with very favorable results for the moment, as it is the use as coating molds used for different elements fabrication. One of the mostly often used techniques to deposit protective coatings is the sputtering technique, which has been used in this work. In the present study we have analysed structural and mechanical properties of TiN and AlN thin films, using X-Ray diffraction, scanning electron microscopy, nanoindentation and pin-on-disk techniques. Thermal treatments have been applied on the mentioned films, applying three different temperature values: 750oC, 850oC y 950oC. Changes in their properties before and after the treatments have been observed. TiN layers show a thermal resistance around 750oC. The thermal resistance for AlN layers is around 850oC, being also observed an improvement in their properties when applying 850ºC of thermal treatment.

La utilización de materiales cerámicos como el nitruro de titanio o de aluminio ha experimentado una gran popularización en los últimos años gracias a su gran variedad de aplicaciones. Una importante aplicación que cuenta hasta el momento con resultados muy favorables es la de su uso como recubrimientos protectores de herramientas industriales, así como de moldes empleados en la fabricación de diferentes elementos. Una de las técnicas más utilizadas en la obtención de recubrimientos protectores es la técnica de sputtering, utilizada en este trabajo. En el presente estudio se han analizado las propiedades estructurales y mecánicas de láminas delgadas de TiN y AlN mediante las técnicas de difracción de rayos X, microscopía electrónica de barrido, nanoindentación y pin-on-disk. Dichas capas han sido sometidas a un tratamiento t

Chalcopyrite Dissolution at 650 mV and 750 mV in the Presence of Pyrite

Directory of Open Access Journals (Sweden)

Yubiao Li

2015-08-01

Full Text Available The dissolution of chalcopyrite in association with pyrite in mine waste results in the severe environmental issue of acid and metalliferous drainage (AMD. To better understand chalcopyrite dissolution, and the impact of chalcopyrite’s galvanic interaction with pyrite, chalcopyrite dissolution has been examined at 75 °C, pH 1.0, in the presence of quartz (as an inert mineral and pyrite. The presence of pyrite increased the chalcopyrite dissolution rate by more than five times at Eh of 650 mV (SHE (Cu recovery 2.5 cf. 12% over 132 days due to galvanic interaction between chalcopyrite and pyrite. Dissolution of Cu and Fe was stoichiometric and no pyrite dissolved. Although the chalcopyrite dissolution rate at 750 mV (SHE was approximately four-fold greater (Cu recovery of 45% within 132 days as compared to at 650 mV in the presence of pyrite, the galvanic interaction between chalcopyrite and pyrite was negligible. Approximately all of the sulfur from the leached chalcopyrite was converted to S0 at 750 mV, regardless of the presence of pyrite. At this Eh approximately 60% of the sulfur associated with pyrite dissolution was oxidised to S0 and the remaining 40% was released in soluble forms, e.g., SO42−.

Baseline Fracture Toughness and CGR testing of alloys X-750 and XM-19 (EPRI Phase I)

International Nuclear Information System (INIS)

Jackson, J.H.; Teysseyre, S.P.

2012-01-01

The Advanced Test Reactor National Scientific User Facility (ATR NSUF) and Electric Power Research Institute (EPRI) formed an agreement to test representative alloys used as reactor structural materials as a pilot program toward establishing guidelines for future ATR NSUF research programs. This report contains results from the portion of this program established as Phase I (of three phases) that entails baseline fracture toughness, stress corrosion cracking (SCC), and tensile testing of selected materials for comparison to similar tests conducted at GE Global Research. The intent of this Phase I research program is to determine baseline properties for the materials of interest prior to irradiation, and to ensure comparability between laboratories using similar testing techniques, prior to applying these techniques to the same materials after having been irradiated at the Advanced Test Reactor (ATR). The materials chosen for this research are the nickel based super alloy X-750, and nitrogen strengthened austenitic stainless steel XM-19. A spare core shroud upper support bracket of alloy X-750 was purchased by EPRI from Southern Co. and a section of XM-19 plate was purchased by EPRI from GE-Hitachi. These materials were sectioned at GE Global Research and provided to INL.

The Cu-Bi-Se phase system at temperatures between 300° and 750° C

DEFF Research Database (Denmark)

Karup-Møller, Sven

2003-01-01

Phase relations were determined in the Cu-Bi-Se phase system at 300, 350, 400, 450, 550, 650 and 750degreesC. Four ternary phases, phase A-D, have been synthesized. Phase A (Cu4Bi4Se9) is isotype with Cu4Bi4S9, and phase B (Cu1.7Bi4.7 Se-8) and phase C (Cu3Bi5Se9) have the same structure type as P...

Heat treatment effects on structure and proerties of the alloy type KhN73MBNYu (EhJ 698)

International Nuclear Information System (INIS)

Maslenkov, S.B.; Maslenkova, E.A.; Solov'ev, Yu.V.; Zryumov, V.P.

1994-01-01

Influence of quenching temperature and various ageing conditions on tensile properties and impact strength of wrought alloy type KhN73MBTYu has been investigated at room temperature and in the range of 500-850 deg C. Two-step quenching followed by ageing at 700-750 deg C. Two-step quenching followed by ageing at 700-750 deg C is shown to assure needed heat resistance of the alloy. Due to the whole complex of structural changes during heat treatments mechanical properties of the alloy preserv high level up to 750 deg C. This temperature is limiting value in the case of long-term operation

78 FR 77699 - Information Collection Request Sent to the Office of Management and Budget (OMB) for Approval...

Science.gov (United States)

2013-12-24

... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-HQ-WSR-2013-N292]; [FVWF941009000007B-XXX-FF09W10000; FVWF51100900000-XXX-FF09W10000] Information Collection Request Sent to the Office of... technology constraints. We expanded to a cloud-computing environment in October 2012, and, effective January...

Powerful infrared emitting diodes

Directory of Open Access Journals (Sweden)

Kogan L. M.

2012-02-01

Full Text Available Powerful infrared LEDs with emission wavelength 805 ± 10, 870 ± 20 and 940 ± 10 nm developed at SPC OED "OPTEL" are presented in the article. The radiant intensity of beam diode is under 4 W/sr in the continuous mode and under 100 W/sr in the pulse mode. The radiation power of wide-angle LEDs reaches 1 W in continuous mode. The external quantum efficiency of emission IR diodes runs up to 30%. There also has been created infrared diode modules with a block of flat Fresnel lenses with radiant intensity under 70 W/sr.

In vitro antibacterial effect of Withania somnifera root extract on Escherichia coli

Science.gov (United States)

Kumari, Mamta; Gupta, R. P.

2015-01-01

Aim: The aim was to investigate antibacterial activity of Withania somnifera (Ashwagandha), an Indian traditional medicinal plant against Escherichia coli O78, a pathogenic strain. Materials and Methods: Two-fold serial dilutions of 20% aqueous W. somnifera root (WSR) extract were inoculated with E. coli O78 @ 1*107 colony forming units grown in nutrient broth. Following inoculation, turbidity optical density was measured by spectrophotometer at 600 nm in all the tubes at 0, 2, 4, 6 and 8 h of incubation at 37°C. Result: The results revealed that the maximum inhibition of bacterial growth was observed at 1:8 dilution of WSR extract. The highest dilution of the extract that showed inhibited growth of the test organism when compared with control was 1:16. Therefore, the minimum inhibitory concentration of aqueous extract of WSR is 1:16. Conclusion: It is concluded that WSR possessed good antibacterial activity, confirming the great potential of bioactive compounds and its rationalizing use in health care. PMID:27046997

Coherent Synchrotron Radiation for Rotational Spectroscopy: Application to the Rotational Spectrum of Propynal in the 200-750 GHz Range

Science.gov (United States)

Barros, J.; Roy, P.; Appadoo, D.; Naughton, D. Mc; Robertson, E.; Manceron, L.

2013-06-01

In storage rings, short electron bunches can produce an intense THz radiation called Coherent Synchrotron Radiation (CSR). The flux of this emission between 250 and 750 GHz (in the mW range, up the 10000 times the regular synchrotron emission) is very advantageous for broad band absorption spectroscopy, using interferometric techniques. This source is, however, inherently difficult to stabilize, and intensity fluctuations lead to artifacts on the FT-based measurements, which strongly limit the use of CSR in particular for high-resolution measurements. At SOLEIL however, by screening different currents and bunch lengths, we defined stable CSR conditions for which the signal-to-noise ratio (S/N) allows for measurements at high resolution. Moreover, we developed an artifact correction system, based on a simultaneous detection of the input and the output signals of the interferometer, which allows to further improve the S/N. For this purpose, the optics and electronics of two bolometers were matched. The stable CSR combined with this ingenious technique allowed us to record for the first time high-resolution FT spectra in the sub-THz range, with a S/N of 100 in a few hours. This enables many applications such as broadband rotational spectra in the THz range, studies of molecules with low frequency torsional modes, absolute intensities determinations, or studies of unstable species. Results obtained on Propynal illustrate these possibilities and enabled to improve significantly the ground state spectroscopic constants.

Commissioning experiences on high voltage generator of 750 KeV DC accelerator at RRCAT, Indore

International Nuclear Information System (INIS)

Banwari, R.; Kasliwal, A.; Pandit, T.G.

2009-01-01

Design approach of high voltage generator for 750 keV DC accelerator, developed at RRCAT Indore, inculcates a unique feature of high frequency operation of symmetrical Cockcroft-Walton voltage generator. Apart from design simplicity and feasibility of modular construction, the high frequency use of symmetrical Cockcroft-Walton circuit gives added advantages of less ripple, better regulation, faster response and low stored energy in the system. Additionally the scheme allows us the use of low voltage, light weight components thus improving the overall economy of the system. The accelerator has been commissioned and made operational at its rated energy of 750 keV in the recent past. With brief introduction on design aspects of high voltage generator and filament power supply of this accelerator, the paper presented here describes the developmental steps of various components with focus on challenges encountered and solutions implemented. Development of high frequency inverter, high voltage ferrite core transformer, compensating inductors, interface bushings, voltage multiplier stack, and filament transformer along with floating power supply for electron emitter of the accelerator has been dealt in detail. The failures encountered during commissioning stages of the accelerator have been reported with measures taken for improvement of the specific components. Intricacies of the reflected capacitance of the multiplier stack and arc-current ground return are also described with their effects on system operation and reliability. (author)

Safety, efficacy, and predictability of laser in situ keratomileusis to correct myopia or myopic astigmatism with a 750 Hz scanning-spot laser system.

Science.gov (United States)

Tomita, Minoru; Watabe, Miyuki; Yukawa, Satoshi; Nakamura, Nobuo; Nakamura, Tadayuki; Magnago, Thomas

2014-02-01

To evaluate the clinical outcomes of laser in situ keratomileusis (LASIK) to correct myopia or myopic astigmatism using the Amaris 750S 750 Hz excimer laser. Private LASIK center, Tokyo, Japan. Case series. Patients with myopia or myopic astigmatism (spherical equivalent -0.50 to -11.63 diopters [D]), a corrected distance visual acuity (CDVA) of 20/20 or better, and an estimated residual bed thickness of 300 μm or more had LASIK using the aspheric aberration-free ablation profile of the 750 Hz scanning-spot laser and the Femto LDV Crystal Line femtosecond laser for flap creation. Study parameters included uncorrected distance visual acuity (UDVA), CDVA, manifest refraction, astigmatism, and higher-order aberrations (HOAs). The study included 1280 eyes (685 patients). At 3 months, 96.6% of eyes had a UDVA of 20/20 or better and 99.1% had 20/32 or better; 94.1% of eyes were within ± 0.50 D of the intended correction and 98.9% were within ± 1.00 D; 89.7% of eyes had no residual cylinder and 96.0% had a postoperative astigmatism of less than 0.50 D. All eyes had a postoperative CDVA of 20/20 or better. The HOAs increased postoperatively (PLaser in situ keratomileusis with the 750 Hz scanning-spot laser was safe, effective, and predictable. No specific clinical side effects that might be associated with a high repetition rate occurred. Mr. Magnago is an employee of Schwind eye-tech-solutions GmbH. No other author has a financial or proprietary interest in any material or method mentioned. Copyright © 2013 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Revisiting light stringy states in view of the 750 GeV diphoton excess

Energy Technology Data Exchange (ETDEWEB)

Anastasopoulos, Pascal, E-mail: pascal@hep.itp.tuwien.ac.at [Technische Universität Wien, Institut für Theoretische Physik, A-1040 Vienna (Austria); Bianchi, Massimo, E-mail: massimo.bianchi@roma2.infn.it [Dipartimento di Fisica and Sezione I.N.F.N., Università di Roma “Tor Vergata”, Via della Ricerca Scientifica 1, 00133 Roma (Italy)

2016-10-15

We investigate light massive string states that appear at brane intersections. They replicate the massless spectrum in a richer fashion and may be parametrically lighter than standard Regge excitations. We identify the first few physical states and determine their BRST invariant vertex operators. In the supersymmetric case we reconstruct the super-multiplet structure. We then compute some simple interactions, such as the decay rate of a massive scalar or vector into two massless fermions. Finally we suggest an alternative interpretation of the 750 GeV diphoton excess at LHC in terms of a light massive string state, a replica of the Standard Model Higgs.

Rancang Bangun Generator Sinkron 1 Fasa Magnet Permanen Kecepatan Rendah 750 RPM

Directory of Open Access Journals (Sweden)

Herudin Herudin

2016-11-01

Full Text Available Energi listrik merupakan hal yang sangat penting dalam kehidupan manusia untuk meningkatkan kesejahteraan hidup. Untuk memenuhi peningkatan kebutuhan akan energi listrik maka diperlukan juga pengembangan sistem pembangkit energi listrik alternatif yang dapat diperbaharui (renewable . Salah satu komponen utama untuk menghasilkan energi listrik alternatif yaitu generator. Generator berfungsi sebagai perubah energy mekanik menjadi energy listrik. Berdasarkan kondisi tersebut maka pada penelitian ini akan dirancang dan dibuat sebuah generator sinkron magnet permanen 8 kutub, satu fasa dengan menggunakan magnet Neodynium Ferit Boron ( NdFeB tipe Neoflux-30 yang dioperasikan pada kecepatan 750 rpm. Hasil pengujian menunjukan bahwa pada saat generator tidak dibebani menghasilkan tegangan sebesar 7,91 Volt dan pada saat berbeban, tegangan yang dihasilkan generator sebesar 6,11 Volt dengan efisiensi sebesar 32,84% .

New software methods in radar ornithology using WSR-88D weather data and potential application to monitoring effects of climate change on bird migration

Science.gov (United States)

Mead, Reginald; Paxton, John; Sojda, Richard S.; Swayne, David A.; Yang, Wanhong; Voinov, A.A.; Rizzoli, A.; Filatova, T.

2010-01-01

Radar ornithology has provided tools for studying the movement of birds, especially related to migration. Researchers have presented qualitative evidence suggesting that birds, or at least migration events, can be identified using large broad scale radars such as the WSR-88D used in the NEXRAD weather surveillance system. This is potentially a boon for ornithologists because such data cover a large portion of the United States, are constantly being produced, are freely available, and have been archived since the early 1990s. A major obstacle to this research, however, has been that identifying birds in NEXRAD data has required a trained technician to manually inspect a graphically rendered radar sweep. A single site completes one volume scan every five to ten minutes, producing over 52,000 volume scans in one year. This is an immense amount of data, and manual classification is infeasible. We have developed a system that identifies biological echoes using machine learning techniques. This approach begins with training data using scans that have been classified by experts, or uses bird data collected in the field. The data are preprocessed to ensure quality and to emphasize relevant features. A classifier is then trained using this data and cross validation is used to measure performance. We compared neural networks, naive Bayes, and k-nearest neighbor classifiers. Empirical evidence is provided showing that this system can achieve classification accuracies in the 80th to 90th percentile. We propose to apply these methods to studying bird migration phenology and how it is affected by climate variability and change over multiple temporal scales.

The 750 GeV Diphoton Resonance in the MSSM

CERN Document Server

Djouadi, Abdelhak

2017-02-10

We propose a simple interpretation of the 750 GeV diphoton resonance as hinted by the current 13 TeV LHC data, within the context of the Minimal Supersymmetric extension of the Standard Model (MSSM). In the CP-conserving limit of the theory, the resonance may be identified with the heavier CP-even $H$ boson of the MSSM, whose gluon-fusion production and decay into two photons are enhanced by loops of the lightest supersymmetric partner of the top quark $\\tilde{t}_1$ when its mass $m_{\\tilde{t}_1}$ happens to be near the $\\tilde{t}^*_1\\tilde{t}_1$ threshold, i.e.~for $m_{\\tilde{t}_1} \\sim \\frac12 M_H$ and, to a lesser extent, by resonant contributions due to $\\tilde{t}_1^* \\tilde{t}_1$ bound states. The scenario requires a relatively low supersymmetry-breaking scale~$M_S\\lsim 1$~TeV, but large values of the higgsino mass parameter, $\\mu \\gsim 3$ TeV that leads to a strong $H \\tilde{t}_1 \\tilde{t}_1$ coupling. Such parameters can accommodate the observed mass and standard-like couplings of the 125~GeV $h$ boson...

Tribological behavior of 440C martensitic stainless steel from -184 C to 750 C

Science.gov (United States)

Slifka, A. J.; Compos, R.; Morgan, T. J.; Siegwarth, J. D.; Chaudhuri, Dilip K.

1992-01-01

Characterization of the coefficient of friction and wear rate of 440C stainless steel is needed to understand the effects of frictional heating in the bearings of the High Pressure Oxygen Turbopump of the Space Shuttle Main Engine. The coefficient of friction and wear rate have been measured over a range of temperature varying from liquid oxygen temperature (-184 C) to 750 C. The normal load has also been varied resulting in a variation of Hertzian stress from 0.915 to 3.660 GPa while the surface velocity has been varied from 0.5 to 2.0 m/s.

40 CFR Table 1 to Subpart W of... - General Provisions Applicability to Subpart W

Science.gov (United States)

2010-07-01

... Subpart W 1 Table 1 to Subpart W of Part 63 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Polyamides Production Pt. 63, Subpt. W, Table 1 Table 1 to Subpart W of Part 63—General Provisions Applicability to Subpart W Reference Applies to subpart W BLR WSR WSR alternative standard, and BLR equipment...

rf measurements and tuning of the 750 MHz radio frequency quadrupole

Directory of Open Access Journals (Sweden)

Benjamin Koubek

2017-08-01

Full Text Available In the framework of the program on medical applications a compact 750 MHz RFQ has been designed and built to be used as an injector for a hadron therapy linac. This RFQ was designed to accelerate protons to an energy of 5 MeV within only 2 m length. It is divided into four segments and equipped with 32 tuners in total. The length of the RFQ corresponds to 5λ which is considered to be close to the limit for field adjustment using only piston tuners. Moreover the high frequency, which is about double the frequency of existing RFQs, results in a sensitive structure and requires careful tuning. In this paper we present the tuning algorithm, the tuning procedure and rf measurements of the RFQ.

Future Collider Signatures of the Possible 750 GeV State

CERN Document Server

Djouadi, Abdelhak; Godbole, Rohini; Quevillon, Jérémie

2016-03-31

If the recent indications of a possible state $\\Phi$ with mass $\\sim 750$ GeV decaying into two photons reported by ATLAS and CMS in LHC collisions at 13 TeV were to become confirmed, the prospects for future collider physics at the LHC and beyond would be affected radically, as we explore in this paper. Even minimal scenarios for the $\\Phi$ resonance and its $\\gamma \\gamma$ decays require additional particles with masses $\\gtrsim \\frac12 m_\\Phi$. We consider here two benchmark scenarios that exemplify the range of possibilities: one in which $\\Phi$ is a singlet scalar or pseudoscalar boson whose production and $\\gamma \\gamma$ decays are due to loops of coloured and charged fermions, and another benchmark scenario in which $\\Phi$ is a superposition of (nearly) degenerate CP-even and CP-odd Higgs bosons in a (possibly supersymmetric) two-Higgs doublet model also with additional fermions to account for the $\\gamma \\gamma$ decay rate. We explore the implications of these benchmark scenarios for the production of...

Estimation of expected short-circuit current levels in and circuit-breaker requirements for the 330 to 750 kV networks of the southern integrated power grid

Energy Technology Data Exchange (ETDEWEB)

Krivushkin, L.F.; Gorazeeva, T.F.

1978-08-01

Studies were made in order to project the operating levels in the Southern Integrated Power Grid to the year 2000. The short-circuit current levels and, the requirements which circuit breakers will have to meet are estimated. A gradual transition from 330 to 750 kV generation is foreseen, with 330 kV networks remaining only for a purely distribution service. The number of 330 kV line hookups and the number of circuit breakers at nodal points (stations and substations) will not change significantly, they will account for 40% of all circuit breakers installed in 25% of all nodal points. Short-circuit currents are expected to reach the 46 kA level in 750 kV networks and 63 kA (standing wave voltage 1.5 to 2.5 kV/microsecond) in 330 kV networks. These are the ratings of circuit breakers; of the 63 kA ones 150 will be needed by 1980--1990 and 400 by 1990--2000. It will also be eventually worthwhile to install circuit breakers with a 63 kA-750 kV rating.

K-p→π0π0Σ0 at pK-=514-750 MeV/c and comparison with other π0π0 production

International Nuclear Information System (INIS)

Prakhov, S.; Nefkens, B.M.K.; Clajus, M.; Marusic, A.; McDonald, S.; Phaisangittisakul, N.; Price, J.W.; Starostin, A.; Tippens, W.B.; Allgower, C.E.; Spinka, H.; Bekrenev, V.; Koulbardis, A.; Kozlenko, N.; Kruglov, S.; Lopatin, I.; Briscoe, W.J.; Shafi, A.; Comfort, J.R.; Craig, K.

2004-01-01

Reaction K - p→π 0 π 0 Σ 0 was measured with the Crystal Ball multiphoton spectrometer at eight K - momenta from 514 to 750 MeV/c. Dynamics and the energy dependence of the reaction are shown by Dalitz plots, invariant mass spectra, production angular distributions, and total cross sections. The dipion invariant-mass spectra for K - p→π 0 π 0 Σ 0 show an enhancement in the low mass region; the opposite is the case for the K - p→π 0 π 0 Λ and π - p→π 0 π 0 n reactions. There is no direct evidence for a f 0 (600)-meson contribution to π 0 π 0 production. Everywhere σ t (K - p→π 0 π 0 Σ 0 ) t (K - p→π 0 π 0 Λ)

The Gymnosperm Cytochrome P450 CYP750B1 Catalyzes Stereospecific Monoterpene Hydroxylation of (+)-Sabinene in Thujone Biosynthesis in Western Redcedar1[OPEN

Science.gov (United States)

Blaukopf, Markus; Yuen, Macaire M.S.; Withers, Stephen G.; Mattsson, Jim; Russell, John H.; Bohlmann, Jörg

2015-01-01

Western redcedar (WRC; Thuja plicata) produces high amounts of oxygenated thujone monoterpenoids associated with resistance against herbivore feeding, particularly ungulate browsing. Thujones and other monoterpenoids accumulate in glandular structures in the foliage of WRC. Thujones are produced from (+)-sabinene by sabinol and sabinone. Using metabolite analysis, enzyme assays with WRC tissue extracts, cloning, and functional characterization of cytochrome P450 monooxygenases, we established that trans-sabin-3-ol but not cis-sabin-3-ol is the intermediate in thujone biosynthesis in WRC. Based on transcriptome analysis, full-length complementary DNA cloning, and characterization of expressed P450 proteins, we identified CYP750B1 and CYP76AA25 as the enzymes that catalyze the hydroxylation of (+)-sabinene to trans-sabin-3-ol. Gene-specific transcript analysis in contrasting WRC genotypes producing high and low amounts of monoterpenoids, including a glandless low-terpenoid clone, as well as assays for substrate specificity supported a biological role of CYP750B1 in α- and β-thujone biosynthesis. This P450 belongs to the apparently gymnosperm-specific CYP750 family and is, to our knowledge, the first member of this family to be functionally characterized. In contrast, CYP76AA25 has a broader substrate spectrum, also converting the sesquiterpene farnesene and the herbicide isoproturon, and its transcript profiles are not well correlated with thujone accumulation. PMID:25829465

Combined TiN- and TaN temperature compensated thin film resistors

International Nuclear Information System (INIS)

Malmros, Anna; Andersson, Kristoffer; Rorsman, Niklas

2012-01-01

The opposite signs of the temperature coefficient of resistance (TCR) of two thin film materials, titanium nitride (TiN) and tantalum nitride (TaN), were used to form temperature compensated thin film resistors (TFRs). The principle of designing temperature compensated TFRs by connecting TFRs of each compound in series or in parallel was demonstrated. TiN, TaN, and combined TiN and TaN TFRs for monolithic microwave integrated circuits (MMICs) were fabricated by reactive sputtering. DC characterization was performed over the temperature range of 30–200 °C. The TiN TFRs exhibited an increase in resistivity with temperature with TCRs of 540 and 750 ppm/°C. The TaN TFR on the other hand exhibited a negative TCR of − 470 ppm/°C. The shunted TFRs were fabricated by serial deposition of TiN and TaN to form a bilayer component. The TCRs of the series- and shunt configurations were experimentally reduced to − 60 and 100 ppm/°C, respectively. The concept of temperature compensation was used to build a Wheatstone bridge with an application in on-chip temperature sensing.

Oxygen excess in the '114' cobaltite hexagonal structure: The ferrimagnet CaBaCo4O7.50

International Nuclear Information System (INIS)

Pralong, V.; Caignaert, V.; Sarkar, T.; Lebedev, O.I.; Duffort, V.; Raveau, B.

2011-01-01

The study of the oxidation of the '114' orthorhombic cobaltite CaBaCo 4 O 7 , using first electrochemistry and then soft chemistry based on oxidation by NaClO, has allowed a new phase, CaBaCo 4 O 7.50 , to be prepared topotactically. The structural study of this phase shows that its hexagonal structure, closely related to that of orthorhombic CaBaCo 4 O 7 , is curiously similar to that of the members of the LnBaCo 4 O 7 series, in spite of its excess oxygen. Its magnetic study shows that this phase, like CaBaCo 4 O 7 , is ferrimagnetic with the same T C (60 K), but differently exhibits an unusual magnetic hysteresis. This exceptional behavior of CaBaCo 4 O 7 with respect to oxidation as well as the magnetic properties of CaBaCo 4 O 7.50 is interpreted in terms of the presence of defects due to oxidation. - Graphical Abstract: The study of the oxidation of the '114' orthorhombic cobaltite CaBaCo 4 O 7 , using first electrochemistry and then soft chemistry based on oxidation by NaClO, has allowed a new phase, CaBaCo 4 O 7.50 , to be prepared topotactically. The structural study of this phase shows that its hexagonal structure, closely related to that of orthorhombic CaBaCo 4 O 7 , is curiously similar to that of the members of the LnBaCo 4 O 7 series, in spite of its oxygen excess. Its magnetic study shows that this phase, like CaBaCo 4 O 7 , is ferrimagnetic. Highlights: → Topotactic oxidation by means of electrochemistry and soft chemistry of the '114' orthorhombic cobaltite CaBaCo 4 O 7 . → This new phase, CaBaCo 4 O 7.5 shows an hexagonal structure, is closely related to that of orthorhombic mother phase CaBaCo 4 O 7 . → CaBaCo 4 O 7.5 is ferrimagnetic and exhibits an unusual magnetic hysteresis, due to defect pinning centers.

Tratamiento del enfisema intersticial pulmonar unilateral con ventilación monopulmonar contralateral: Presentación de 1 caso

Directory of Open Access Journals (Sweden)

María Victoria González Alonso

1998-06-01

Full Text Available Se presenta el caso de un recién nacido de 750 g de peso y 27 semanas de edad gestacional, que durante su evolución en la asistencia respiratoria mecánica, presentó enfisema intersticial pulmonar a tensión en el pulmón derecho, el cual producía desplazamiento mediastinal y pobre aereación del pulmón izquierdo. La subsecuente hipercapnia hizo fracasar todos los intentos de disminuir la presión inspiratoria en la vía aérea proximal y el enfisema intersticial fue empeorando. A los 6 días de vida se decide realizar intubación selectiva del bronquiotronco izquierdo y mantener al paciente con ventilación monopulmonar izquierda durante 36 horas. Al recolocar el tubo en la tráquea y reexpandirse el pulmón derecho, se observó una disminución notable del enfisema intersticial pulmonar y una mejoría gasométrica importante que permitió reducir la intensidad del apoyo ventilatorio. El paciente falleció posteriormente durante una enteritis necrosante.It is presented a case of a newborn of 750 g of weight and 27 weeks of gestational age that during his evolution in the mechanical respiratory assistance had a pulmonary interstitial emphysema on stress in the right lung, which produced mediastinal displacement and poor airing of the left lung. The subsequent hypercapsia made all the attempts to reduce the inspiratory pressure in the proximal air passage fail and therefore, the interstitial emphysema got worse. After the 6th day of life, it was decided to carry out selective intubation of the left bronchial trunk and to mantain the patient with left monopulmonary ventilation during 36 hours. On placing the tube into the trachea again, the right lung reexpanded and it was observed a remarkable decrease of the pulmonary interstitial emphysema and an important gasometric improvement that allowed to reduce that intensity of the ventilatory support. The patient died later due to a necrotizing enteritis.

Microstructural evolution of CANDU spacer material Inconel X-750 under in situ ion irradiation

Energy Technology Data Exchange (ETDEWEB)

Zhang, He Ken [Department of Mechanical and Materials Engineering, Queen’s University Kingston, Ontario K7L 3N6 (Canada); Yao, Zhongwen, E-mail: yaoz@me.queensu.ca [Department of Mechanical and Materials Engineering, Queen’s University Kingston, Ontario K7L 3N6 (Canada); Judge, Colin; Griffiths, Malcolm [Deformation Technology Branch, AECL, Chalk River Laboratories Chalk River, Ontario K0J 1J0 (Canada)

2013-11-15

Highlights: •γ′ Disordered at low dose. •Cascade induced SFTs were observed in alloy X-750. •No cavities were found from mono heavy ions irradiated samples. -- Abstract: Work on Inconel® X-750 spacers removed from CANDU® reactors has shown that they become embrittled and there is development of many small cavities within the metal matrix and along grain boundaries. In order to emulate the neutron irradiation induced microstructural changes, heavy ion irradiations (1 MeV Kr{sup 2+} ions) were performed while observing the damage evolution using an intermediate voltage electron microscope (IVEM) operating at 200 kV. The irradiations were carried out at various temperatures 60–400 °C. The principal strengthening phase, γ′, was disordered at low doses (∼0.06 dpa) during the irradiation. M{sub 23}C{sub 6} carbides were found to be stable up to 5.4 dpa. Lattice defects consisted mostly of stacking fault tetrahedras (SFTs), 1/2<1 1 0> perfect loops and small 1/3<1 1 1> faulted Frank loops. The ratio of SFT number density to loop number density for each irradiation condition was found to be neither temperature nor dose dependent. Under the operation of the ion beam the SFT production was very rapid, with no evidence for further growth once formed, indicating that they probably formed as a result of cascade collapse in a single cascade. The number density of the defects was found to saturate at low dose (∼0.68 dpa). No cavities were observed regardless of the irradiation temperature between 60 °C and 400 °C for doses up to 5.4 dpa. In contrast, cavities have been observed after neutron irradiation in the same material at similar doses and temperatures indicating that helium, produce during neutron irradiation, may be essential for the nucleation and growth of cavities.

The thermal expansion of a highly crystalline hexagonal BC2N compound synthesized under high temperature and pressure

International Nuclear Information System (INIS)

Wu Qinghua; Liu Zhongyuan; Hu Qianku; Li Hui; He Julong; Yu Dongli; Li Dongchun; Tian Yongjun

2006-01-01

The thermal expansion has been investigated for a highly crystalline hexagonal BC 2 N compound synthesized by the compression of a turbostratic B-C-N precursor with iron catalyst at the high temperature of 1500 deg. C and the high pressure of 5.5 GPa. The thermal expansion in the c direction is large and linear with an expansion coefficient of 35.86 x 10 -6 K -1 up to 1000 deg. C, while in the basal plane, the a dimension displays a slight linear contraction up to 750 deg. C with a contraction coefficient of -8.76 x 10 -7 K -1 , but above 750 deg. C a linear expansion is observed with a larger expansion coefficient of 1.52 x 10 -6 K -1

40 khz/40 kVA ZVS resonant inverter for 750 keV DC accelerator

International Nuclear Information System (INIS)

Kasliwal, Apollo; Tripathi, Alok; Pandit, T.G.; Banwari, R.; Kotaiah, S.

2003-01-01

This paper presents the analysis and design of a high order Leucal resonant inverter for application in the 750 keV DC Accelerator machine being commissioned at CAT, Indore. High frequency resonant inverters are replacing the conventional Pm counterparts due to high efficiency, reduced size, weight and cost. The operating characteristics and analysis of series resonant (SRC), parallel resonant (PRC) and series parallel (SPRC) resonant converters have been reported for fixed frequency operation. It has been shown that SPRC takes the advantage of both SRC and PRC curtailing their disadvantages. The inverter configuration used has boost characteristics (capacitive voltage multiplication) with High Frequency Transformer isolation and is suitable for DC to DC high voltage application. (author)

A SUSY inspired simplified model for the 750 GeV diphoton excess

Energy Technology Data Exchange (ETDEWEB)

Gabrielli, E. [Dipart. di Fisica Teorica, Università di Trieste, Strada Costiera 11, I-34151 Trieste (Italy); INFN, Sezione di Trieste, Via Valerio 2, I-34127 Trieste (Italy); NICPB, Rävala 10, Tallinn 10143 (Estonia); Kannike, K., E-mail: kannike@cern.ch [NICPB, Rävala 10, Tallinn 10143 (Estonia); Mele, B. [INFN, Sezione di Roma, c/o Dipart. di Fisica, Università di Roma “La Sapienza”, Piazzale Aldo Moro 2, I-00185 Rome (Italy); Raidal, M. [NICPB, Rävala 10, Tallinn 10143 (Estonia); Institute of Physics, University of Tartu (Estonia); Spethmann, C.; Veermäe, H. [NICPB, Rävala 10, Tallinn 10143 (Estonia)

2016-05-10

The evidence for a new neutral scalar particle from the 750 GeV diphoton excess, and the absence of any other signal of new physics at the LHC so far, suggests the existence of new coloured scalars. To study this possibility, we propose a supersymmetry inspired simplified model, extending the Standard Model with a singlet scalar and with heavy scalar fields carrying both colour and electric charges – new scalar quarks. To allow the latter to decay, and to generate the dark matter of the Universe, we also add a neutral fermion to the particle content. We show that this model provides a two-parameter fit to the observed diphoton excess consistently with cosmology, while the allowed parameter space is bounded by the consistency of the model. In the context of our simplified model this implies the existence of other supersymmetric particles accessible at the LHC, rendering this scenario falsifiable.

Study of the K K{pi} meson resonances produced in antiproton proton annihilations at 750 MeV/c; Estudio de resonancias mesonicas en el sistema KK{pi} en aniquilaciones de antiprotones a 750 MeV/cde momento

Energy Technology Data Exchange (ETDEWEB)

Gil Lopez, E

1977-07-01

In this work we present an analysis of the antiproton proton annihilations into strange particles at 700 and 750 MeV/c, restricted to the four and five body final states. We study in detail the resonances decaying into the K K{pi}; system, in particular the D and E mesons. For the D meson we present a determination of i ts mass, width, isospin, G-parity, C-parity and spin. For the E meson we present parametrizations of the complete final state which decrease its statistical significance in this type of production. (Author)

The origin of the red emission in n-ZnO nanotubes/p-GaN white light emitting diodes

Directory of Open Access Journals (Sweden)

Alvi N

2011-01-01

Full Text Available Abstract In this article, the electroluminescence (EL spectra of zinc oxide (ZnO nanotubes/p-GaN light emitting diodes (LEDs annealed in different ambients (argon, air, oxygen, and nitrogen have been investigated. The ZnO nanotubes by aqueous chemical growth (ACG technique on p-GaN substrates were obtained. The as-grown ZnO nanotubes were annealed in different ambients at 600°C for 30 min. The EL investigations showed that air, oxygen, and nitrogen annealing ambients have strongly affected the deep level emission bands in ZnO. It was concluded from the EL investigation that more than one deep level defect is involved in the red emission appearing between 620 and 750 nm and that the red emission in ZnO can be attributed to oxygen interstitials (Oi appearing in the range from 620 nm (1.99 eV to 690 nm (1.79 eV, and to oxygen vacancies (Vo appearing in the range from 690 nm (1.79 eV to 750 nm (1.65 eV. The annealing ambients, especially the nitrogen ambient, were also found to greatly influence the color-rendering properties and increase the CRI of the as - grown LEDs from 87 to 96.

The origin of the red emission in n-ZnO nanotubes/p-GaN white light emitting diodes

Science.gov (United States)

Alvi, N. H.; Ul Hasan, Kamran; Nur, Omer; Willander, Magnus

2011-12-01

In this article, the electroluminescence (EL) spectra of zinc oxide (ZnO) nanotubes/p-GaN light emitting diodes (LEDs) annealed in different ambients (argon, air, oxygen, and nitrogen) have been investigated. The ZnO nanotubes by aqueous chemical growth (ACG) technique on p-GaN substrates were obtained. The as-grown ZnO nanotubes were annealed in different ambients at 600°C for 30 min. The EL investigations showed that air, oxygen, and nitrogen annealing ambients have strongly affected the deep level emission bands in ZnO. It was concluded from the EL investigation that more than one deep level defect is involved in the red emission appearing between 620 and 750 nm and that the red emission in ZnO can be attributed to oxygen interstitials (Oi) appearing in the range from 620 nm (1.99 eV) to 690 nm (1.79 eV), and to oxygen vacancies (Vo) appearing in the range from 690 nm (1.79 eV) to 750 nm (1.65 eV). The annealing ambients, especially the nitrogen ambient, were also found to greatly influence the color-rendering properties and increase the CRI of the as - grown LEDs from 87 to 96.

EVALUACIÓN DEL TIEMPO Y TEMPERATURA DE INCUBACIÓN EN EL PROCESO DETOXIFICACIÓN DE UNA TOXINA TETÁNICA

Directory of Open Access Journals (Sweden)

Marcela Duarte

2002-06-01

Full Text Available Con el fin de disminuir el tiempo y la temperatura de incubación en el proceso de detoxificación de la Toxina Tetánica, se evaluaron diferentes tiempos y temperaturas de incubación; tomando cosechas en proceso del laboratorio de Producción de Tétanos del Instituto Nacional de Salud INS. Para determinar el día exacto de detoxificación se estableció un modelo logístico que involucró la estimación de la temperatura. La toxina se incubó a 4, 22 y 37°C, posteriormente se verificaron las características físico-químicas (pH, biológicas (Lf/mL, toxicidad inespecífica, específica y antigenicidad del toxoide obtenido. Las mejores condiciones para el proceso son: 25 días de incubación a 37°C. Con las características citadas anteriormente se obtiene al año una ganancia de 1'513.350 dosis, que representan en dinero un a!torro anual de $37' 833.750 en la producción de la vacuna tetánica.

Markers of visceral obesity and cardiovascular risk in patients with polycystic ovarian syndrome.

Science.gov (United States)

Gateva, Antoaneta Trifonova; Kamenov, Zdravko Asenov

2012-10-01

Polycystic ovarian syndrome (PCOS) is one of most common endocrine disturbances in women of reproductive age. Besides its well known effects on reproductive health, it is also linked to increased cardiovascular risk in later life. The aim of this study was to investigate the link between some anthropometric indices of visceral obesity and surrogate markers of cardiovascular risk according to the Androgen Excess and Polycystic Ovary Syndrome (AE-PCOS) Society consensus. The study included 36 normal weight (BMIcardiometabolic profile and composite cardiovascular risk factors as defined by the AE-PCOS consensus. Both waist-to-stature ratio (WSR) (area under the curve 0.75, p=0.002) and waist circumference (WC) (area under the curve 0.77, p=0.001) but not waist-to-hip ratio (WHR) (area under the curve 0.62, p=0.143) were shown to be good markers of increased cardiovascular risk, insulin resistance and dislipidemia in PCOS patients. The cut-off point for WSR of 0.50 is useful and the cut-off of 80 cm for WC is more appropriate than 88 cm in detecting cardiovascular risk in PCOS patients. Androgen levels and immunoreactive insulin during an oral glucose tolerance test had lower power for predicting increased cardiovascular risk than WC and WSR. The study indicates that WSR and WC are better associated with composite cardiovascular risk factors as defined by the AE-PCOS consensus than WHR, and that the commonly used cut-off for WSR of 0.5 is useful for detecting cardiovascular risk in PCOS patients. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Comparative study of polar and semipolar (112¯2) InGaN layers grown by metalorganic vapour phase epitaxy

International Nuclear Information System (INIS)

Dinh, Duc V.; Zubialevich, V. Z.; Oehler, F.; Kappers, M. J.; Humphreys, C. J.; Alam, S. N.; Parbrook, P. J.; Caliebe, M.; Scholtz, F.

2014-01-01

InGaN layers were grown simultaneously on (112 ¯ 2) GaN and (0001) GaN templates by metalorganic vapour phase epitaxy. At higher growth temperature (≥750 °C), the indium content ( ¯ 2) and (0001) InGaN layers was similar. However, for temperatures less than 750 °C, the indium content of the (112 ¯ 2) InGaN layers (15%–26%) were generally lower than those with (0001) orientation (15%–32%). The compositional deviation was attributed to the different strain relaxations between the (112 ¯ 2) and (0001) InGaN layers. Room temperature photoluminescence measurements of the (112 ¯ 2) InGaN layers showed an emission wavelength that shifts gradually from 380 nm to 580 nm with decreasing growth temperature (or increasing indium composition). The peak emission wavelength of the (112 ¯ 2) InGaN layers with an indium content of more than 10% blue-shifted a constant value of ≈(50–60) nm when using higher excitation power densities. This blue-shift was attributed to band filling effects in the layers.

Plasma-assisted Molecular Beam Epitaxy of N-polar InAlN-barrier High-electron-mobility Transistors.

Science.gov (United States)

Hardy, Matthew T; Storm, David F; Katzer, D Scott; Downey, Brian P; Nepal, Neeraj; Meyer, David J

2016-11-24

Plasma-assisted molecular beam epitaxy is well suited for the epitaxial growth of III-nitride thin films and heterostructures with smooth, abrupt interfaces required for high-quality high-electron-mobility transistors (HEMTs). A procedure is presented for the growth of N-polar InAlN HEMTs, including wafer preparation and growth of buffer layers, the InAlN barrier layer, AlN and GaN interlayers and the GaN channel. Critical issues at each step of the process are identified, such as avoiding Ga accumulation in the GaN buffer, the role of temperature on InAlN compositional homogeneity, and the use of Ga flux during the AlN interlayer and the interrupt prior to GaN channel growth. Compositionally homogeneous N-polar InAlN thin films are demonstrated with surface root-mean-squared roughness as low as 0.19 nm and InAlN-based HEMT structures are reported having mobility as high as 1,750 cm 2 /V∙sec for devices with a sheet charge density of 1.7 x 10 13 cm -2 .

Raman spectroscopic studies on single supersaturated droplets of sodium and magnesium acetate.

Science.gov (United States)

Wang, Liang-Yu; Zhang, Yun-Hong; Zhao, Li-Jun

2005-02-03

Raman spectroscopy was used to study structural changes, in particular, the formation of contact-ion pairs in supersaturated aqueous NaCH(3)COO and Mg(CH(3)COO)(2) droplets at ambient temperatures. The single droplets levitated in an electrodynamic balance (EDB), lost water, and became supersaturated when the relative humidity (RH) decreased. For NaCH(3)COO droplet the water-to-solute molar ratio (WSR) was 3.87 without solidification when water molecules were not enough to fill in the first hydration layer of Na(+), in favor of the formation of contact-ion pairs. However, the symmetric stretching vibration band (nu(3) mode) of free -COO(-) constantly appeared at 1416 cm(-1), and no spectroscopic information related to monodentate, bidentate, or bridge bidentate contact-ion pairs was observed due to the weak interactions between the Na(+) and acetate ion. On the other hand, the band of methyl deformation blue shifted from 1352 to 1370 cm(-1) (at RH = 34.2%, WSR = 2.43), corresponding to the solidification process of a novel metastable phase in the highly supersaturated solutions. With further decreasing RH, a small amount of supersaturated solution still existed and was proposed to be hermetically covered by the metastable phase of the particle. In contrast, the interaction between Mg(2+) and acetate ion is much stronger. When WSR decreased from 21.67 to 2.58 for the Mg(CH(3)COO)(2) droplet, the band of C-C-symmetric stretching (nu(4) mode) had a blue shift from 936 to 947 cm(-1). The intensity of the two new shoulders (approximately 1456 and approximately 1443 cm(-1)) of the nu(3) band of free -COO(-) at 1420 cm(-1) increased with the decrease of WSR. These changes were attributed to the formation of contact-ion pairs with bidentate structures. In particular, the small frequency difference between the shoulder at approximately 1443 cm(-1) and the nu(3) band of the free -COO(-) group (approximately 1420 cm(-1)) was proposed to be related to the formation of a chain

VALIDACIÓN DE PCR PARA DETECCIÓN DE Listeria monocytogenes EN CARNES CRUDAS DE RES Y POLLO

Directory of Open Access Journals (Sweden)

Kirvis Torres

2004-12-01

Full Text Available Listeria monocytogenes es un microorganismo zoonótico emergente en la industria de alimentos, resultando degran interés para la salud pública. El objetivo de este trabajo fue validar la técnica de PCR para la detecciónde este microorganismo en carnes crudas de res y pollo. El procedimiento de extracción de ADN fue realizadocon lisozima, proteinasa K y fenol-cloroformo a partir de muestras contaminadas artificialmente. La especificidadde los cebadores LI1 y U1 fue comprobada por la amplificación de una banda de 938pb correspondiente a unfragmento del ADNr 16S; de igual manera los cebadores LF y LR amplificaron una banda del gen hlyA de750pb; lo que permitió la identificación de género (banda 938pb y especie (banda de 750pb respectivamente.Las cepas de los otros géneros bacterianos ensayados no amplificaron ninguna de las bandas específicas. Ellímite de detección para la PCR fue de 102 y 104 UFC/gr para carnes de res y pollo respectivamente; el «GoldStandard» reportó 102 UFC/ml para ambos alimentos. La comparación de la PCR vs., el método «Gold Standard»reportó en carne de pollo una concordancia observada de 98.43%, una sensibilidad del 96.9%, una especificidadde 100%, un valor predictivo positivo del 100% y un valor predictivo negativo del 97%; para la carne de restodos los parámetros anteriores fueron del 100%. Estos resultados demostraron la factibilidad de la PCR parael control de calidad de carnes crudas de res y pollo.

Identification of Precipitates in Cr-Mn-N Based Steel After Thermal Exposures

Directory of Open Access Journals (Sweden)

Ondruška Michal

2014-06-01

Full Text Available The paper deals with the identification of precipitates in the Cr-Mn-N steels after thermal exposure. The purpose of the study is to clarify the M2N precipitation by isothermal annealing at the temperatures of 750 and 900 °C with a holding time of 5, 10, 30 min, 1 hr. and 10 hrs. Microstructure of austenitic steel was characterised by the typical presence of annealing twins. Stepwise etching was observed at the holding time of 5 and 10 minutes, but at the holding time of 30 minutes, secondary particles were precipitated at the grain boundaries. Corrosion tests revealed that holding time significantly affected steel structure. M2N is the dominant precipitate, but the occurrence of σ-phase was occasionally observed especially at the interface of discontinuous precipitation and austenitic matrix. Slight increase of hardness at the grain boundaries was caused due to the precipitation of secondary phases during isothermal holding. The maximum hardness of 294 HV was measured on the sample isothermally annealed at 750 °C and holding for 10 hrs. The research provides theoretical basis for the heat affecting of steels, such as, for example, in welding.

Experimental determination of the phase relationships in Zr/2.5 8.0 at% Nb/0 6.7 at% Al alloys with 750 at ppm 0 and 250 at ppm N between 730 900° C

Science.gov (United States)

Peruzzi, A.; Bolcich, J.

1990-11-01

Zr alloys with 2.5 to 8.0 at% Nb and 0 to 6.7 at% Al were subjected to dynamic and static treatments between 730-900° C and studied by qualitative and quantitative optical metallography, electrical resistance, X-ray diffractometry and electron microanalysis. The experimental data were analyzed by taking into account the effects of oxygen and nitrogen impurities. The main results for Zn-Nb-Al alloys with 750 at ppm O and 250 at ppm N are the following: (i) Equilibrium relationships are established between the α (hcp), β (bcc) and Zr 3Al (Cu 3Au) phases along isothermal sections at 730, 771 and 800°C. (ii) The β/ α + β boundaries are determined along iso-aluminum vertical sections at 6.7, 3.3 and 0 at% Al. (iii) The addition of Al to Zr-Nb alloys increases the solubility of Nb in the α phase, its maximum value at 730° C being about 0.7-0.8 at% for 4 at% Al. (iv) Solubility values for Al in the α-phase of Zr-Al were estimated by extrapolation from ternary alloys. These estimates help to solve an existing discrepancy in the Zr-Al system.

Experimental determination of the phase relationships in Zr/2.5-8.0 at% Nb/0-6.7 at% Al alloys with 750 at ppm O and 250 at ppm N between 730-900deg C

International Nuclear Information System (INIS)

Peruzzi, A.; Bolcich, J.

1990-01-01

Zr alloys with 2.5 to 8.0 at% Nb and 0 to 6.7 at% Al were subjected to dynamic and static treatments between 730-900deg C and studied by qualitative and quantitative optical metallography, electrical resistance, X-ray diffractometry and electron microanalysis. The experimental data were analyzed by taking into account the effects of oxygen and nitrogen impurities. The main results for Zn-Nb-Al alloys with 750 atppm O and 250 atppm N are the following: (i) Equilibrium relationships are established between the α (hcp), β (bcc) and Zr 3 Al (Cu 3 Au) phases along isothermal sections at 730, 771 and 800deg C. (ii) The β/α+β boundaries are determined along iso-aluminum vertical sections at 6.7, 3.3 and 0 at% Al. (iii) The addition of Al to Zr-Nb alloys increases the solubility of Nb in the α phase, its maximum value at 730deg C being about 0.7-0.8 at% for 4 at% Al.(iv) Solubility values for Al in the α-phase of Zr-Al were estimated by extrapolation from ternary alloys. These estimates help to solve an existing discrepancy in the Zr-Al system. (orig.)

A 3 Year-Old Male Child Ingested Approximately 750 Grams of Elemental Mercury

Directory of Open Access Journals (Sweden)

Metin Uysalol

2016-08-01

Full Text Available Background: The oral ingestion of elemental mercury is unlikely to cause systemic toxicity, as it is poorly absorbed through the gastrointestinal system. However, abnormal gastrointestinal function or anatomy may allow elemental mercury into the bloodstream and the peritoneal space. Systemic effects of massive oral intake of mercury have rarely been reported. Case Report: In this paper, we are presenting the highest ingle oral intake of elemental mercury by a child aged 3 years. A Libyan boy aged 3 years ingested approximately 750 grams of elemental mercury and was still asymptomatic. Conclusion: The patient had no existing disease or abnormal gastrointestinal function or anatomy. The physical examination was normal. His serum mercury level was 91 μg/L (normal: <5 μg/L, and he showed no clinical manifestations. Exposure to mercury in children through different circumstances remains a likely occurrence.

Design and characterization of GaN p-i-n diodes for betavoltaic devices

Science.gov (United States)

Khan, Muhammad R.; Smith, Joshua R.; Tompkins, Randy P.; Kelley, Stephen; Litz, Marc; Russo, John; Leathersich, Jeff; Shahedipour-Sandvik, Fatemeh (Shadi); Jones, Kenneth A.; Iliadis, Agis

2017-10-01

The performance of gallium nitride (GaN) p-i-n diodes were investigated for use as a betavoltaic device. Dark IV measurements showed a turn on-voltage of approximately 3.2 V, specific-on-resistance of 15.1 mΩ cm2 and a reverse leakage current of -0.14 mA/cm2 at -10 V. A clear photo-response was observed when IV curves were measured under a light source at a wavelength of 310 nm (4.0 eV). In addition, GaN p-i-n diodes were tested under an electron-beam in order to simulate common beta radiation sources ranging from that of 3H (5.6 keV average) to 63Ni (17 keV average). From this data, we estimated output powers of 53 nW and 750 nW with overall efficiencies of 0.96% and 4.4% for our device at incident electron energies of 5.6 keV and 17 keV corresponding to 3H and 63Ni beta sources respectively.

Deciphering the CP nature of the 750 GeV resonance

International Nuclear Information System (INIS)

Chala, Mikael; Grojean, Christophe; Riembau, Marc; Vantalon, Thibaud; Barcelona Institute of Science and Technology

2016-07-01

The recently observed excess in diphoton events at around 750 GeV can be satisfactorily described in terms of a new spin-0 real singlet with effective interactions to the gauge bosons. In this letter we first review the current constraints on this setup. We further explore the production in association with a gauge boson. We show the potential of this channel to unravel current flat directions in the allowed parameter space. We then study the potential of two different asymmetries for disentangling the CP nature of such a singlet in both gluon fusion and vector-boson fusion. For this matter, we perform an estimation of the efficiency for selecting signal and background events in eight different decay modes, namely 4l, 2j2l, 2jlE T , 2γ2j, 4l2j, 2lγ2j, 4j2l and 4jlE T . We emphasize that the very different couplings of this new singlet to the Standard Model particles as well as the larger mass provide a distinctive phenomenology with respect to Higgs searches. We finally show that a large region of the parameter space region could be tested within the current LHC run, the dominant channel being 2γ2j.

Process for forming unusually strong joints between metals and ceramics by brazing at temperatures that do no exceed 750 degree C.

Science.gov (United States)

Hammond, Joseph P.; David, Stan A.; Woodhouse, John J.

1986-01-01

This invention is a process for joining metals to ceramics to form very strong bonds using low brazing temperature, i.e., less than 750.degree. C., and particularly for joining nodular cast iron to partially stabilized zirconia. The process provides that the ceramic be coated with an active metal, such as titanium, that can form an intermetallic with a low melting point brazing alloy such as 60Ag-30Cu-10Sn. The nodular cast iron is coated with a noncarbon containing metal, such as copper, to prevent carbon in the nodular cast iron from dissolving in the brazing alloy. These coated surfaces can be brazed together with the brazing alloy between at less than 750.degree. C. to form a very strong joint. An even stronger bond can be formed if a transition piece is used between the metal and ceramic. It is preferred for the transition piece to have a coefficient of thermal compatible with the coefficient of thermal expansion of the ceramic, such as titanium.

Utilização do diagnóstico de enfermagem segundo a classificação da NANDA, para a sistematização da assistência de enfermagem em aleitamento materno Utilización del diagnóstico de enfermería, según clasificación de la NANDA, para sistematización de la asistencia de enfermería en la lactancia materna Utilization of nursing diagnosis according to NANDA's classification in order to systematize nursing care in breastfeeding

Directory of Open Access Journals (Sweden)

Ana Cristina F. Vilhena Abrão

1997-04-01

Full Text Available Este estudo teve por objetivos descrever a reformulação de um instrumento utilizado na consulta de enfermagem à puérpera, com base na classificação dos diagnósticos de enfermagem, segundo a Taxonomia I-revisada da American Nursing Diagnosis Association - NANDA, e identificar os diagnósticos de enfermagem mais frequentes, relacionados ao aleitamento materno a partir da utilização deste instrumento. Os diagnósticos encontrados em percentuais acima de 50% foram: déficit de conhecimento (100,0%; distúrbio no padrão do sono (75,0%; alteração no padrão de sexualidade (75,0%; amamentação ineficaz (66,6% e mobilidade física prejudicada (66,6%.En este estudio se describe el proceso de reformulación de un guía de evaluación de puérperas, utilizado en la consulta de enfermeria, teniendo como referencia la clasificación de los diagnósticos de enfermería de la Taxonomía I-revisada por la Asociación Norteamericana de Enfermería (NANDA. También son determinados los diagnósticos de enfermería relacionados con la lactancia materna, que fueron calificados con porcentajes superiores a 50%, a partir de la aplicación de la guía reformulada. Ellos son: déficit de conocimiento (100,0%, cambios en el patrón del sueño (75,0%, cambios en el patrón de sexualidad (75,0%, lactancia ineficaz (66,6% y movilidad física disminuida.The present study aimed at describing the reformulated instrument used in the puerperal woman nursing consultation based on the identified diagnoses classification according to the Taxonomy-I reviewed by NANDA, and the identification of the most frequent nursing diagnoses concerning maternal breastfeeding, based on the reformulated instrument. The diagnoses found as being over 50% were: knowledge deficit (100%; sleep pattern disturbance (75%, altered sexuality patterns (75%, ineffective breastfeeding (66,6% and impaired physical mobility (66,6%.

Study of the K Kπ meson resonances produced in antiproton proton annihilations at 750 MeV/c

International Nuclear Information System (INIS)

Gil Lopez, E.

1977-01-01

In this work we present an analysis of the antiproton proton annihilations into strange particles at 700 and 750 MeV/c, restricted to the four and five body final states. We study in detail the resonances decaying into the K Kπ; system, in particular the D and E mesons. For the D meson we present a determination of i ts mass, width, isospin, G-parity, C-parity and spin. For the E meson we present parametrizations of the complete final state which decrease its statistical significance in this type of production. (Author)

Pressureless sintering of dense Si3N4 and Si3N4/SiC composites with nitrate additives

International Nuclear Information System (INIS)

Kim, J.Y.; Iseki, Takayoshi; Yano, Toyohiko

1996-01-01

The effect of aluminum and yttrium nitrate additives on the densification of monolithic Si 3 N 4 and a Si 3 N 4 /SiC composite by pressureless sintering was compared with that of oxide additives. The surfaces of Si 3 N 4 particles milled with aluminum and yttrium nitrates, which were added as methanol solutions, were coated with a different layer containing Al and Y from that of Si 3 N 4 particles milled with oxide additives. Monolithic Si 3 N 4 could be sintered to 94% of theoretical density (TD) at 1,500 C with nitrate additives. The sintering temperature was about 100 C lower than the case with oxide additives. After pressureless sintering at 1,750 C for 2 h in N 2 , the bulk density of a Si 3 N 4 /20 wt% SiC composite reached 95% TD with nitrate additives

Water Dancer II-a: a Non-tethered Telecontrollable Water Strider Robot

Directory of Open Access Journals (Sweden)

Licheng Wu

2011-09-01

Full Text Available Water Strider Robot (WSR is a kind of bio‐ inspired micro robot that can stand and move on water surface via surface tension. In this paper, a design method is presented with algorithms for designing driving leg. Structure, control system and software of the robot are also discussed in details. A prototype Water Dancer II‐a that is driven with two electric motors is presented as successfully tested in lab. The proposed WSR is tele‐controlled with infrared signals and has the capability of turning and speed regulation with features of light tiny volume and low power consumption. Experimental results are reported and discussed to show practical feasibility of the presented WSR prototype. The new results in the paper are related also to the WSR prototype design with a robot body of less than 30 x 30 mm size and with ten leg rods of 90 mm length and 0.2 diameter that are able to provide lifting force for a water walk of the 6.0 grams robot at a forward speed of 20 cm/s or angular velocity of 9 degree/s with two micro DC motors (RoomFlight 4 x 8 mm, 28 Ohm.

Water Dancer II-A: A Non-Tethered Telecontrollable Water Strider Robot

Directory of Open Access Journals (Sweden)

Licheng Wu

2011-09-01

Full Text Available Water Strider Robot (WSR is a kind of bio-inspired micro robot that can stand and move on water surface via surface tension. In this paper, a design method is presented with algorithms for designing driving leg. Structure, control system and software of the robot are also discussed in details. A prototype Water Dancer II-a that is driven with two electric motors is presented as successfully tested in lab. The proposed WSR is tele-controlled with infrared signals and has the capability of turning and speed regulation with features of light tiny volume and low power consumption. Experimental results are reported and discussed to show practical feasibility of the presented WSR prototype. The new results in the paper are related also to the WSR prototype design with a robot body of less than 30 × 30 mm size and with ten leg rods of 90 mm length and 0.2 diameter that are able to provide lifting force for a water walk of the 6.0 grams robot at a forward speed of 20 cm/s or angular velocity of 9 degree/s with two micro DC motors(RoomFlight 4 × 8 mm, 28 Ohm.

Estudio de la inteligencia emocional y función ejecutiva en educación primaria

Directory of Open Access Journals (Sweden)

Rebollo Goñi, Edurne

2017-01-01

Full Text Available La Inteligencia Emocional y la Función Ejecutiva son clave en la educación por la influencia en el proceso de enseñanza-aprendizaje. El objetivo de este trabajo es analizar la relación entre la Inteligencia Emocional (intrapersonal e interpersonal y la Función Ejecutiva. Método: Los participantes (N=87, M=7.50, SD=1.03 eran escolares de Educación Primaria, a los que se les administró la prueba de Evaluación Neuropsicológica de Funciones Ejecutivas en niños (Portellano, Martínez y Zumárraga, 2009 para valorar las funciones ejecutivas, concretamente planificación, fluidez verbal e interferencia cognitiva y el Cuestionario de Inteligencias Múltiples de Armstrong (2001 con las escalas de inteligencia interpersonal e inteligencia intrapersonal para valorar Inteligencia Emocional. Se emplea un diseño ex postfacto, descriptivo y correlacional. Resultados: El análisis evidencia que existen relaciones significativas entre Inteligencia Emocional y Funciones Ejecutivas. Conclusiones: Resalta la relevancia de incluir en el currículo educativo programas de intervención neuropsicológica que trabajen habilidades emocionales y competencias ejecutivas para optimizar el rendimiento académico y personal del alumnado de Educación Primaria. Abstract: Emotional Intelligence and Executive Function are key in education due to their influence in the teaching-learning process. The aim of this research study is to analyze the relationship between emotional intelligence (intra and interpersonal and some of the components of executive functions. Method: The participants (N=87, M=7.50, SD=1.03 are students in Primary Education who were administered the Neuropsychological Assessment of Executive Functions in Children (Portellano, Martínez y Zumárraga, 2009 to assess executive functions, specifically planning, verbal fluency and cognitive interference as well as Armstrong’s questionnaire on Multiples Intelligences (2001 with scales of interpersonal

Caracterización de los datos de medición de armónicos variables en el tiempo; Characterization of Time Varying Harmonics Data Measurement

Directory of Open Access Journals (Sweden)

Vladimir Sousa Santos

2011-02-01

Full Text Available En el artículo se hace una revisión de los problemas asociados a la medición de los niveles de armónicos presentes,en una onda distorsionada de tensión y corriente no estacionaria, y se efectúa la caracterización de los datosregistrados. Para ello se utiliza como ejemplo un grupo de mediciones recientes, realizadas en condiciones decampo a un motor asincrónico trifásico de 320 kW, 440 V, 820 A, 750 r/min, cuya velocidad se regula con unconvertidor de frecuencia, y se determina la distorsión de tensión y corriente. Estos datos son descritos en diferentesformas estadísticas. Las ventajas y desventajas de cada una de ellas son discutidas, así como la interpretación delos resultados. Se analizan, además, los factores que influyen en el factor de distorsión de tensión (FDT. Lasobservaciones realizadas en el trabajo son aplicables a cualquier armónico individual o al THD.  The purpose of this article is to review the problems associated to the measurement of the harmonic levelscorresponding to non-stationary distorted voltage and current waves and characterize the obtained data. For thatpurpose, recent in situ measurements made to a 320 kW, 440 V, 820 A, 750 r/min induction motor, controlled bya PWM frequency converter, is used as an example. The voltage and current distortion are determined. Thesedata are described with different statistical procedures. The advantages and disadvantages of these proceduresare discussed, as well as the results interpretation. Furthermore, the elements that affect the voltage distortionfactor (VDF are analyzed. The considerations made in this study are applicable to any individual harmonic or tothe total harmonic distortion factor (THD.

Tensile behavior of Inconel alloy X-750 in air and vacuum at elevated temperatures

International Nuclear Information System (INIS)

Taplin, D.M.R.; Mukherjee, A.K.; Pandey, M.C.

1984-01-01

The hot tensile properties of Inconel alloy X-750 have been investigated experimentally at 700 C in air and vacuum at strain rates varying from 10 to the -7th to 1.2 x 10 to the -6th per s. The strength and ductile characteristics of the specimens tested in vacuum are found to be better than those tested in air. In air, a ductility minimum is observed at 625 C, whereas in vacuum, significant improvements in creep ductility are observed at 575 and 625 C, with the ductility minimum shifting from 625 to 700 C. It is shown that the creep ductility of the specimens tested in air is largely determined by the following two competing processes: (1) deformation-assisted oxygen diffusion and (2) grain boundary migration. 20 references

Study of the φ meson in the pp→φK10K20π+π- annihilations at 700-750 MeV/c

International Nuclear Information System (INIS)

Gil Lopez, E.

1976-01-01

We have measured the mass and width of the φ meson using the pp →π + π - K 1 0 K 2 0 annihilations at 700-750 MeV/c.- The values obtained are In good agreement with proceeding measurements. The mass has been measured with a high accuracy. (Author) 3 refs

Análisis de los factores de rendimiento en triatlón distancia sprint

OpenAIRE

Cejuela Anta, Roberto; Pérez Turpin, José Antonio; Villa Vicente, José Gerardo; Cortell-Tormo, Juan M.; Rodríguez Marroyo, José Antonio

2007-01-01

El triatlón es un deporte combinado y de resistencia donde se desarrollan sin solución de continuidad natación, ciclismo y carrera a pie, siempre en ese orden y sin parar el cronometro. La distancia Sprint es la más corta según el reglamento y sobre la cual se disputan mayor número de pruebas (0’750 km, 20 km, 5 km). Determinar los factores de rendimiento es fundamental para optimizar el entrenamiento de una modalidad deportiva. La diversidad de distancias en este deporte, obliga a realizar d...

Conflicto conyugal: evidencias de validez de una escala de resolución de conflictos en parejas del sur de Brasil

Directory of Open Access Journals (Sweden)

Marina Zanella Delatorre

2017-02-01

Full Text Available Este estudio tuvo como objetivo adaptar la estructura factorial del Conflict Resolution Styles Inventory (CRSI para la población del sur de Brasil, además de relacionar las cuatro dimensiones de resolución de conflictos (resolución positiva, distanciamiento, sumisión y participación en el conflicto medidas por la escala con variables sociodemográficas, con el fin de comprender cómo las parejas manejas sus conflictos. Participaron en la investigación 750 mujeres y 750 hombres casados, con edad promedio de 40,9 años y que cohabitaban con el compañero actual en promedio hace 15,78 años. Los participantes respondieron a un cuestionario de datos sociodemográficos y al CRSI. Los datos revelan una estructura componencial de la escala semejante a la original. La resolución positiva fue la más empleada tanto por los hombres como por las mujeres, a pesar de que los datos evidenciaron un patrón de demanda por parte de las mujeres y retroceso por parte de los hombres. Se recomiendan adaptaciones en la utilización de la escala en portugués.

Reaction and fission cross-sections of 750AMeV 238U ions on Pb, Cu and AI-targets

International Nuclear Information System (INIS)

Hesse, M.; Aumann, T.; Czajkowski, S.; Dessagne, P.; Hanelt, E.; Kozhuharov, C.; Miehe, C.; Pfuetzner, M.; Roehl, C.; Schwab, W.; Stephan, C.; Tassan-Got, L.

1995-09-01

Charge-loss and fission cross-sections of 238 U at 750 A.MeV were measured on Al, Cu and Pb targets. The charge-loss rate was obtained by the attenuation method. Fission was selected by detecting the pair of highly ionizing fragments. Since the neutron-loss cross sections were measured in a parallel experiment for the same projectiles, all cross sections contributing to 238 U collisions on nuclei are available now as function of the target mass number and can be compared with current models. (orig.)

化疗方案及疗程对乳腺癌患者体成分的影响%Effects of chemotherapy regimen and course of treatment on body composition of breast cancer patients

Institute of Scientific and Technical Information of China (English)

梁振华; 齐路霞; 寇小格; 王晶晶; 温有锋

2017-01-01

目的:研究不同方案和疗程对乳腺癌患者体成分的影响.方法:利用前瞻性研究,间接计算出患者的腰臀比、腰围身高比(WSR)、身体质量指数(BMI)、体脂率、体脂肪和瘦体质量等体质指标、体成分的含量.结果:不同疗程的WSR、BMI、体脂、体脂率差异有统计学意义,BMI、体脂、体脂率与疗程间的两两比较差异有统计学意义;WSR在表柔比星+环磷酰胺(EC)方案疗程间(第一、二次化疗比较除外)的两两比较差异有统计学意义,和多柔比星+环磷酰胺(AC)方案疗程间(第一次与化疗前,第二、三次疗程比较除外)的两两比较差异有统计学意义.结论:EC方案中,BMI、WSR、体脂肪、体脂率随疗程进展而增加;AC方案中,BMI、体脂肪、体脂率随疗程进展先减少后增加,WSR随疗程进展而增加.%Objective: To study the effect of different chemotherapy regimens on body composition in different courses of breast cancer patients. Methods: Prospective research methods were used to calculate the waist-to-hip ratio, waist height ratio (WSR), body mass index (BMI), body fat rate, body fat and lean body weight. Results: In the epirubicin+cyclophosphamide (EC) program, BMI, WSR, body fat and body fat rate of different courses of treatment had statistically significant differences. Differences among BMI, WSR (except for the comparison of the second chemotherapy and the first chemotherapy), body fat, body fat rate were statistically significant. In the doxorubicin+cyclophosphamide (AC) program, the differences of BMI, WSR, body fat and body fat rate of different courses of treatment were statistically significant, WSR (except for the comparison of the first and before chemotherapy, the second and third chemotherapy) had statistically significant difference between the two groups. The differences of BMI, body fat, body fat rate in the different courses of treatment between the two groups were statistically significant

Search for K-p→π0π0π0Λ from threshold to pK-=750 MeV/c

International Nuclear Information System (INIS)

Borgh, M.; Prakhov, S.; Nefkens, B.M.K.; Clajus, M.; Marusic, A.; McDonald, S.; Phaisangittisakul, N.; Price, J.W.; Starostin, A.; Tippens, W.B.; Allgower, C.E.; Spinka, H.; Bekrenev, V.; Koulbardis, A.; Kozlenko, N.; Kruglov, S.; Lopatin, I.; Briscoe, W.J.; Shafi, A.; Comfort, J.R.

2003-01-01

The results of a search for K - p→π 0 π 0 π 0 Λ (where the 3π 0 's are not from η-meson decay) are presented. The data were obtained with the Crystal Ball spectrometer at eight beam momenta from 514 to 750 MeV/c. For the six beam momenta below p K - =714 MeV/c, no signal was found; the 90% C.L. upper limit obtained for the K - p→3π 0 Λ total cross section σ t varies between 2 and 7 μb. This small upper limit is indicative that spontaneous π 0 emission is insignificant, since the K - p→π 0 π 0 π 0 Λ threshold is at p K - =397 MeV/c. A signal was observed only at p K - =750 MeV/c, with σ t =25±7 μb. These results can be explained only if triple π 0 production goes predominantly by hyperon resonance deexcitation, K - p→Σ * →π 0 Λ * . There are several candidates for the Σ * but only one for the Λ*, namely, the Λ(1520)(3/2) - , as the threshold for K - p→π 0 Λ(1520) is at p K - =704 MeV/c

UV–vis spectroscopic study of room temperature ionic liquid–water mixtures: N,N-diethyl-N-methyl-N-(2-methoxyethyl) ammonium tetrafluoroborate

International Nuclear Information System (INIS)

Aono, Masami; Imai, Yusuke; Abe, Hiroshi; Matsumoto, Hitoshi; Yoshimura, Yukihiro

2012-01-01

Highlights: ► Number of absorption peaks in [DEME][BF 4 ]-H 2 O depends on H 2 O concentrations. ► At 90–96 mol% H 2 O, low optical transmittance shows on UV-visible region. ► Relatively soft glass appears only 90–96 mol% region by slow cooling. - Abstract: N,N-diethyl-N-methyl-N-(2-methoxyethyl) ammonium tetrafluoroborate, [DEME][BF 4 ], and H 2 O mixtures were investigated in optical properties by UV–visible spectroscopy. The concentration region of H 2 O in the mixtures was 0–100 mol%. At room temperature, the mixtures of H 2 O exhibit absorption peaks at around 280 nm and 750 nm, which depend on H 2 O concentrations. At 90–95 mol% H 2 O, the optical transmittance decreased over the whole region of UV–visible light. In X-ray diffraction, correlation over the medium-range such as network-forming materials develops at 90–95 mol%. Also, in quenched glass, low glass transition temperature appeared at these H 2 O concentrations. The specific glass is induced by different molecular aggregation in liquid. Therefore, an optical anomaly is connected with the specific water network over the medium-range order.

InN-based layers grown by modified HVPE

International Nuclear Information System (INIS)

Syrkin, A.; Usikov, A.; Soukhoveev, V.; Kovalenkov, O.; Ivantsov, V.; Dmitriev, V.; Collins, C.; Readinger, E.; Shmidt, N.; Davydov, V.; Nikishin, S.; Kuryatkov, V.; Song, D.; Rosenbladt, D.; Holtz, Mark

2006-01-01

This paper contains results on InN and InGaN growth by Hydride Vapor Phase Epitaxy (HVPE) on various substrates including sapphire and GaN/sapphire, AlGaN/sapphire, and AlN/sapphire templates. The growth processes are carried out at atmospheric pressure in a hot wall reactor in the temperature range from 500 to 750 and ordm;C. Continuous InN layers are grown on GaN/sapphire template substrates. Textured InN layers are deposited on AlN/sapphire and AlGaN/sapphire templates. Arrays of nano-crystalline InN rods with various shapes are grown directly on sapphire substrates. X-ray diffraction rocking curves for the (002)InN reflection have the full width at half maximum (FWHM) as narrow as 270 arcsec for the nano-rods and 460 arcsec for the continuous layers. In x Ga 1-x N layers with InN content up to 10 mol.% are grown on GaN/sapphire templates. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Lay up of a 750 t/h combined unit under the aspect of the liberalized power market; Konservierung eines 750-t/h-Kombi-Blockes unter dem Aspekt des liberalisierten Strommarktes

Energy Technology Data Exchange (ETDEWEB)

Reimschuessel, R.; Bellroth, A.; Borgwardt, P.; Krohn, K. [Kraftwerke Mainz-Wiesbaden AG, Mainz (Germany)

2003-07-01

We have been forced by the rough competition on the liberalised power market, especially in the last 15 months, to shut down our unit II, a 345 MW el. combined unit with gas turbine with following 750 t once-through boiler (Benson-type) and an efficiency of 44%, for a shorter or longer period of time. At the same time, availability must be ensured to cope with the price situation/development on the power market. Out of this difficult situation we developed a lay-up concept which allows shutdowns from one week up to six months and the restart within 75 hours. (orig.) [German] Durch die harten Wettbewerbsbedingungen des liberalisierten Strommarktes in Deutschland wurden wir gerade in den letzten beiden Jahren gezwungen, unser Kraftwerk II ueber kuerzere oder laengere Zeitraeume stillzulegen. Gleichzeitig sollte eine schnelle Verfuegbarkeit der Anlage gewaehrleistet sein, um der durch die Stromboerse gehandelten Preissituation gerecht werden zu koennen. Aus dieser schwierigen Situation heraus ist ein Konservierungskonzept entwickelt worden, das Stillstaende von einer Woche bis zu sechs Monaten und eine Wiederverfuegbarkeit innerhalb von 75 h erlaubt. (orig.)

Corrosion of pre-oxidized nickel alloy X-750 in simulated BWR environment

Energy Technology Data Exchange (ETDEWEB)

Tuzi, Silvia, E-mail: silvia.tuzi@chalmers.se [Chalmers University of Technology, SE-412 96 Göteborg (Sweden); Lai, Haiping [Chalmers University of Technology, SE-412 96 Göteborg (Sweden); Göransson, Kenneth [Westinghouse Electric Sweden AB, SE-721 63 Västerås (Sweden); Thuvander, Mattias; Stiller, Krystyna [Chalmers University of Technology, SE-412 96 Göteborg (Sweden)

2017-04-01

Samples of pre-oxidized Alloy X-750 were exposed to a simulated boiling water reactor environment in an autoclave at a temperature of 286 °C and a pressure of 80 bar for four weeks. The effect of alloy iron content on corrosion was investigated by comparing samples with 5 and 8 wt% Fe, respectively. In addition, the effect of two different surface pre-treatments was investigated. The microstructure of the formed oxide scales was studied using mainly electron microscopy. The results showed positive effects of an increased Fe content and of removing the deformed surface layer by pickling. After four weeks of exposure the oxide scale consists of oxides formed in three different ways. The oxide formed during pre-oxidization at 700 °C, mainly consisting of chromia, is partly still present. There is also an outer oxide consisting of NiFe{sub 2}O{sub 4} crystals, reaching a maximum size of 3 μm, which has formed by precipitation of dissolved metal ions. Finally, there is an inner nanocrystalline and porous oxide, with a metallic content reflecting the alloy composition, which has formed by corrosion.

La espectroscopía de impedancia electroquímica (EIS aplicada al estudio del mecanismo de la corrosión en caliente por sales fundidas

Directory of Open Access Journals (Sweden)

Sandro Báez P.

2004-01-01

Full Text Available Las técnicas electroquímicas son empleadas para evaluar las reacciones de corrosión en sistemas acuosos, simulando condiciones reales. En la actualidad no existe un monitoreo en tiempo real del desgaste corrosivo por sales fundidas en los componentes de las calderas; por lo que se hace necesario investigar la utilización de la técnica de EIS para evaluar la corrosión por sales fundidas. Para el desarrollo de este trabajo se construyó una celda de ensayos electroquímicos para corrosión en caliente y se evaluó la velocidad de corrosión de los aceros AISI-304H y T22 en un electrolito 80%V2O5-20%Na2SO4 entre 550°C y 800°C, y con la adición de inhibidores de corrosión como el MgO y el CaO, por medio de las técnicas Extrapolación de Tafel y EIS. Los resultados mostraron que los aceros, por debajo de 750°C, presentan control por difusión en la película de óxido y sobre 750°C, control por difusión en el fundido.

Design and testing of a 750 MHz CW-EPR digital console for small animal imaging

Science.gov (United States)

Sato-Akaba, Hideo; Emoto, Miho C.; Hirata, Hiroshi; Fujii, Hirotada G.

2017-11-01

This paper describes the development of a digital console for three-dimensional (3D) continuous wave electron paramagnetic resonance (CW-EPR) imaging of a small animal to improve the signal-to-noise ratio and lower the cost of the EPR imaging system. A RF generation board, an RF acquisition board and a digital signal processing (DSP) & control board were built for the digital EPR detection. Direct sampling of the reflected RF signal from a resonator (approximately 750 MHz), which contains the EPR signal, was carried out using a band-pass subsampling method. A direct automatic control system to reduce the reflection from the resonator was proposed and implemented in the digital EPR detection scheme. All DSP tasks were carried out in field programmable gate array ICs. In vivo 3D imaging of nitroxyl radicals in a mouse's head was successfully performed.

Precision tools and models to narrow in on the 750 GeV diphoton resonance

CERN Document Server

Staub, Florian; Basso, Lorenzo; Goodsell, Mark D.; Harries, Dylan; Krauss, Manuel E.; Nickel, Kilian; Opferkuch, Toby; Ubaldi, Lorenzo; Vicente, Avelino; Voigt, Alexander

2016-09-23

The hints for a new resonance at 750 GeV from ATLAS and CMS have triggered a significant amount of attention. Since the simplest extensions of the standard model cannot accommodate the observation, many alternatives have been considered to explain the excess. Here we focus on several proposed renormalisable weakly-coupled models and revisit results given in the literature. We point out that physically important subtleties are often missed or neglected. To facilitate the study of the excess we have created a collection of 40 model files, selected from recent literature, for the Mathematica package SARAH. With SARAH one can generate files to perform numerical studies using the tailor-made spectrum generators FlexibleSUSY and SPheno. These have been extended to automatically include crucial higher order corrections to the diphoton and digluon decay rates for both CP-even and CP-odd scalars. Additionally, we have extended the UFO and CalcHep interfaces of SARAH, to pass the precise information about the effective...

Corrosion of metals and alloys in sulfate melts at 750 C

Science.gov (United States)

Misra, A. K.

1986-01-01

The corrosion of Ni, Co, Ni-10Cr, Co-21Cr, and IN738 was studied at 750 C in the presence of molten sulfate mixtures (Na2SO4-Li2SO4 and Na2SO4-CoSO4) and in an atmosphere consisting of O2 + 0.12 percent SO2-SO3. The corrosion was observed to be similar for both Na2SO4-Li2SO4 and Na2SO4-CoSO4 melts. The corrosion of Ni and Co took place by the formation of a mixed oxide plus sulfide scale, very similar to the corrosion in SO2 or SO3 alone. The initial stage for the corrosion of Ni-10Cr involved the formation of a thick NiO + Ni3S2 duplex scale, and Cr sulfide was formed during the later stages. A pitting type of morphology was observed for both Co-21Cr and IN738. The pit was Cr sulfide at the beginning, and subsequently the sulfides oxidized to Cr2O3. A base-metal oxide layer was present above the pit, and this was observed to be formed very early in the corrosion process. A mechanism is proposed to explain this. In general, the formation of sulfides appears to be the primary mode of degradation in mixed sulfide melts.

Synthesis of p-type nickel oxide nanosheets on n-type titanium dioxide nanorod arrays for p-n heterojunction-based UV photosensor

Science.gov (United States)

Yusoff, M. M.; Mamat, M. H.; Malek, M. F.; Abdullah, M. A. R.; Ismail, A. S.; Saidi, S. A.; Mohamed, R.; Suriani, A. B.; Khusaimi, Z.; Rusop, M.

2018-05-01

Titanium dioxide (TiO2) nanorod arrays (TNAs) were synthesized and deposited on fluorine tin oxide (FTO)-coated glass substrate using a novel and facile immersion method in a glass container. The synthesis and deposition of p-type nickel oxide (NiO) nanosheets (NS) on the n-type TNAs was investigated in the p-n heterojunction photodiode (PD) for the application of ultraviolet (UV) photosensor. The fabricated TNAs/NiO NS based UV photosensor exhibited a highly increased photocurrent of 4.3 µA under UV radiation (365 nm, 750 µW/cm2) at 1.0 V reverse bias. In this study, the fabricated TNAs/NiO NS p-n heterojunction based photodiode showed potential applications for UV photosensor based on the stable photo-generated current attained under UV radiation.

Next Generation Nuclear Plant Project Technology Development Roadmaps: The Technical Path Forward for 750–800°C Reactor Outlet Temperature

Energy Technology Data Exchange (ETDEWEB)

John Collins

2009-08-01

This document presents the NGNP Critical PASSCs and defines their technical maturation path through Technology Development Roadmaps (TDRMs) and their associated Technology Readiness Levels (TRLs). As the critical PASSCs advance through increasing levels of technical maturity, project risk is reduced and the likelihood of within-budget and on-schedule completion is enhanced. The current supplier-generated TRLs and TDRMs for a 750–800°C reactor outlet temperature (ROT) specific to each supplier are collected in Appendix A.

Efeito de diferentes níveis de inclusão de farelo de arroz em dietas suplementadas com fitase para frangos de corte = Effect of different inclusion levels of rice bran in diets supplemented with phytase for broiler chickens

Directory of Open Access Journals (Sweden)

Antônio Robério Vieira

2007-07-01

Full Text Available O experimento foi realizado com o objetivo de avaliar o desempenhozootécnico, rendimento de carcaça e a deposição de fósforo e cinzas na tíbia de frangos de corte submetidos a dietas contendo quantidades crescentes de farelo de arroz integral (FAI, suplementados com fitase. Foram utilizados 600 frangos de corte, machos, da linhagemRoss, alojados em boxes de acordo com um delineamento inteiramente casualizado, nos seguintes tratamentos: T1-ração referência (milho e farelo de soja; T2-ração referência com 750 FTU g-1; T3-ração com 3,5% de FAI com 750 FTU g-1; T4-ração com 7,5% de FAI com 750 FTU g-1; T5-ração com 10,5% FAI com 750 FTU g-1 e T6-ração com 14% FAIcom 750 FTU g-1. A inclusão de fitase, com a utilização de FAI até o nível de 14% e redução do fósforo inorgânico na formulação da ração, não afetou o desempenho zootécnico e características de carcaça dos frangos de corte, porém reduziu a deposição de fósforo e cinzas na tíbia dos ossos.The experiment was carried with the objective of evaluating the productive performance, carcass yield, phosphorus availability and tibia ash in broilers subjected to diets containing increasing amounts of whole rice bran (WRB, supplemented with phytase. Six hundred broilers (Ross, all males, were allocated in boxesaccording to a completely randomized design, being fed the following regimens: T1 standard feed (corn and soybean meal; T2 standard feed with 750 FTU g-1; T3 feed with 3.5% of WRB with 750 FTU g-1; T4 feed with 7.5% of WRB with 750 FTU g-1 T5 feed with 10.5% WRB with 750 FTU g-1 and T6 feed with 14% WRB with 750 FTU g-1. The inclusion of phytase with the use of WRB to the level of 14% and the reduction of the inorganic P in the formulation of the feed did not affect the performance and carcass characteristics of the broiler chickens; however, it did decrease the presence of phosphorus and ash in the tibia.

Effects of repository conditions on environmental impact reduction by recycling

International Nuclear Information System (INIS)

Ahn, Joonhong

2010-01-01

The environmental impacts (EI) of high-level wastes (HLW) disposed of in a water-saturated repository (WSR) and in the Yucca Mountain Repository (YMR) for various fuel cycle cases have been evaluated and compared to observe the difference in the recycling effects for differing repository conditions. With the impacts of direct spent fuel disposal in each repository as the reference level, separation of actinides by Urex+ and borosilicate vitrification clearly reduces the environmental impacts of YMR, while separation by Purex and borosilicate vitrification would not necessarily reduce the environmental impact of WSR. (authors)

In situ observation of fatigue crack initiation and propagation behavior of a high-Nb TiAl alloy at 750 °C

Energy Technology Data Exchange (ETDEWEB)

Min, Zhang [State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083 (China); Xi-ping, Song, E-mail: xpsong@skl.ustb.edu.cn [State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083 (China); Long, Yu; Hong-liang, Li [State Key Laboratory for Advanced Metals and Materials, University of Science and Technology Beijing, Beijing 100083 (China); Ze-hui, Jiao; Hui-chen, Yu [National Key Laboratory of Science and Technology on Advanced High Temperature Structural Materials, Beijing Institute of Aeronautical Materials, Beijing 100095 (China)

2015-01-12

In this paper, the fatigue crack initiation and propagation behavior of a high-Nb TiAl alloy with nearly lamellar microstructure was studied by in situ scanning electron microscope observation at 750 °C. Dog-bone shaped specimens with a single-edge notch were used in the test. The results showed that the fatigue crack initiated first at the central portion of the notch, and then shifted to the edge portion. As the cycle numbers went on increasing, these cracks joined together and formed a main fatigue crack, which could propagate along the surface of the specimen. During the fatigue crack propagation two or three propagation stages were found depending on the microstructure of the crack tip. When the fatigue crack was parallel to the lamellar laths, it exhibited the rapid, steady and accelerated propagation stages successively, while when the fatigue crack was perpendicular to the lamellar laths, it exhibited only the steady and accelerated propagation stages, with no rapid propagation stage being found. In these different propagation stages the fatigue crack propagation rates were different and depended intensively on the lamellar laths orientation, lamellar colony size, equiaxed gamma grains and peak stress intensity factor K{sub max}. Based on the experimental data it was concluded that the fatigue crack initiation lifetime was much longer than the propagation lifetime for the single-edge notched specimens at 750 °C.

In situ observation of fatigue crack initiation and propagation behavior of a high-Nb TiAl alloy at 750 °C

International Nuclear Information System (INIS)

Min, Zhang; Xi-ping, Song; Long, Yu; Hong-liang, Li; Ze-hui, Jiao; Hui-chen, Yu

2015-01-01

In this paper, the fatigue crack initiation and propagation behavior of a high-Nb TiAl alloy with nearly lamellar microstructure was studied by in situ scanning electron microscope observation at 750 °C. Dog-bone shaped specimens with a single-edge notch were used in the test. The results showed that the fatigue crack initiated first at the central portion of the notch, and then shifted to the edge portion. As the cycle numbers went on increasing, these cracks joined together and formed a main fatigue crack, which could propagate along the surface of the specimen. During the fatigue crack propagation two or three propagation stages were found depending on the microstructure of the crack tip. When the fatigue crack was parallel to the lamellar laths, it exhibited the rapid, steady and accelerated propagation stages successively, while when the fatigue crack was perpendicular to the lamellar laths, it exhibited only the steady and accelerated propagation stages, with no rapid propagation stage being found. In these different propagation stages the fatigue crack propagation rates were different and depended intensively on the lamellar laths orientation, lamellar colony size, equiaxed gamma grains and peak stress intensity factor K max . Based on the experimental data it was concluded that the fatigue crack initiation lifetime was much longer than the propagation lifetime for the single-edge notched specimens at 750 °C

β(2) -adrenergic receptor Thr164IIe polymorphism, blood pressure and ischaemic heart disease in 66 750 individuals

DEFF Research Database (Denmark)

Thomsen, M; Dahl, Morten; Tybjærg-Hansen, Anne

2012-01-01

Abstract. Thomsen M, Dahl M, Tybjaerg-Hansen A, Nordestgaard BG (Copenhagen University Hospital, Copenhagen; University of Copenhagen, Copenhagen, Denmark). ß(2) -adrenergic receptor Thr164IIe polymorphism, blood pressure and ischaemic heart disease in 66 750 individuals. J Intern Med 2011; doi: 10.......1111/j.1365-2796.2011.02447.x Objectives. The ß(2) -adrenergic receptor (ADRB2) is located on smooth muscle cells and is an important regulator of smooth muscle tone. The Thr164Ile polymorphism (rs1800888) in the ADRB2 gene is rare but has profound functional consequences on receptor function and could...

Design and testing of a 750MHz CW-EPR digital console for small animal imaging.

Science.gov (United States)

Sato-Akaba, Hideo; Emoto, Miho C; Hirata, Hiroshi; Fujii, Hirotada G

2017-11-01

This paper describes the development of a digital console for three-dimensional (3D) continuous wave electron paramagnetic resonance (CW-EPR) imaging of a small animal to improve the signal-to-noise ratio and lower the cost of the EPR imaging system. A RF generation board, an RF acquisition board and a digital signal processing (DSP) & control board were built for the digital EPR detection. Direct sampling of the reflected RF signal from a resonator (approximately 750MHz), which contains the EPR signal, was carried out using a band-pass subsampling method. A direct automatic control system to reduce the reflection from the resonator was proposed and implemented in the digital EPR detection scheme. All DSP tasks were carried out in field programmable gate array ICs. In vivo 3D imaging of nitroxyl radicals in a mouse's head was successfully performed. Copyright © 2017 Elsevier Inc. All rights reserved.

Improved optical response and photocatalysis for N-doped titanium oxide (TiO2) films prepared by oxidation of TiN

International Nuclear Information System (INIS)

Wan, L.; Li, J.F.; Feng, J.Y.; Sun, W.; Mao, Z.Q.

2007-01-01

In order to improve the photocatalytic activity, N-doped titanium oxide (TiO 2 ) films were obtained by thermal oxidation of TiN films, which were prepared on Ti substrates by ion beam assisted deposition (IBAD). The dominating rutile TiO 2 phase was found in films after thermal oxidation. According to the results of X-ray photoelectron spectroscopy (XPS), the residual N atoms occupied O-atom sites in TiO 2 lattice to form Ti-O-N bonds. UV-vis spectra revealed the N-doped TiO 2 film had a red shift of absorption edge. The maximum red shift was assigned to the sample annealed at 750 deg. C, with an onset wavelength at 600 nm. The onset wavelength corresponded to the photon energy of 2.05 eV, which was nearly 1.0 eV below the band gap of pure rutile TiO 2 . The effect of nitrogen was responsible for the enhancement of photoactivity of N-doped TiO 2 films in the range of visible light

Comportamiento de las aleaciones termorresistentes AISI HH y HK-40 ante los procesos de carburización y nitruración

Directory of Open Access Journals (Sweden)

Eleno Alfonso-Brindis

2001-03-01

Full Text Available Se evalúa el comportamiento de los aceros austeníticos fundidos AISI HH y HK- 40 (de producción nacional ante los procesos de carburización y nitruración en los rangos de temperaturas desde 750 hasta 1 000 °C. Se estudia la cinética y la termodinámica de las posibles reacciones y los productos de las mismas se caracterizan mediante técnicas de Microscopía Óptica, Microscopía Electrónica de Barrido y Microanálisis (MEB-EDAX. En el análisis microscópico se observó la formación de carburos de cromo después de la carburización, mientras que la nitruración dio lugar a la formación de nitruros de cromo. Se concluye que la aleación AISI HK-40 posee una elevada resistencia intrínseca a la carburización y a la nitruración, que hace factible su empleo en componentes de hornos de soleras múltiples para la reducción de minerales lateríticos

Resting heart rate and its relationship with general and abdominal obesity in young male Saudi university students

International Nuclear Information System (INIS)

Yar, T.

2010-01-01

An elevated resting heart rate (Rhr) has been linked with adverse cardiovascular outcomes. Obese people have altered autonomic balance that could lead to elevated Rhr and altered responses to postural changes. As no comparative data are available on Rhr in young normal weight (NW) and obese (OB) adults in Saudi Arabia, the present study was aimed at finding out the effect of adiposity on RHR and RHR response to change in posture. Methods: Second-year male students (n=231; age:19-20 years), were recruited from the Dammam University, Dammam, Saudi Arabia, during the period September 2008 to October 2009. Anthropometric measures were obtained and indices of obesity (body mass index [EMI], waist circumference [WC], waist-to-hip ratio [WHR], waist-to-stature ratio [WSR]) were calculated. RHR in standing and supine positions were obtained from radial pulse. Pearson's correlation (r) between obesity indices and RHR as well as the differences between RHR in NW and OB groups were calculated. Results: General obesity (BMI greater or equal to 25.0 kg/m1 was found in 45.5% students. Central obesity (WC>85 cm or WSR>50.0) was found in 36.8% students. RHR was significantly correlated with BMI, WC and WSR (r=O.305, 0.300, 0.299 respectively, p< O.01) . Subjects above the obesity indices cut-off points had significantly higher values of RHR in both standing and supine positions compared to NW individuals (p<0.05). There was a greater reduction in RHR on changing the posture to supine state in OB group. Conclusion: A significantly higher RHR and a greater change in RHR on changing the posture point towards an altered autonomic balance in OB group of young adolescent males. This underscores the need to implement health education program to combat obesity at school and college levels. (author)

Design of a New Water Load for S-band 750 kW Continuous Wave High Power Klystron Used in EAST Tokamak

Science.gov (United States)

Liu, Liang; Liu, Fukun; Shan, Jiafang; Kuang, Guangli

2007-04-01

In order to test the klystrons operated at a frequency of 3.7 GHz in a continuous wave (CW) mode, a type of water load to absorb its power up to 750 kW is presented. The distilled water sealed with an RF ceramic window is used as the absorbent. At a frequency range of 70 MHz, the VSWR (Voltage Standing Wave Ratio) is below 1.2, and the rise in temperature of water is about 30 oC at the highest power level.

Microstructure Stability of Inconel 740H Alloy After Long Term Exposure at 750℃

Directory of Open Access Journals (Sweden)

DANG Ying-ying

2016-09-01

Full Text Available Unstressed exposure tests of Inconel 740H alloy tube were carried out at 750℃ for 500-3000h. The microstructure evolution and microhardness were studied by means of thermodynamic simulation, OM, FEG-SEM and microhardness testing. The results show that the tube is qualified if both chemical composition and tensile properties of the as-received alloy meet the corresponding requirements of ASME. After long term exposure, the main precipitates are γ' and M23C6, and no η and σ phase. With the prolonging of exposure time, the coarsening of γ' becomes faster and the law of relationship between the radius of γ' and time accords with LSW Ostwald ripening law; meanwhile, the change in size of M23C6 is not so obvious. During the whole process, microhardness increases firstly and then decreases, but the fluctuation is slight. The changes of microstructure and hardness indicate that, after long time exposure, the domestic Inconel 740H has good stability and can be used for further carrying out the investigation on the mechanical property of creep-rupture.

Laboratory evaluation of alloy X-750 clevis bolts removed from D.C. cook unit 1

International Nuclear Information System (INIS)

Hyres, J.; Xu, H.; Kalchik, K.; Thompson, G.

2015-01-01

This paper summarizes the results of the laboratory evaluation performed by Babcock and Wilcox on Alloy X-750 clevis bolts removed from the Lower Radial Support System (LRSS) at D.C. Cook Unit 1. A total of 29 clevis bolts - 16 broken and 13 intact - were provided for laboratory analysis and testing to document the extent of degradation, evaluate the integrity of the intact bolts, and identify the bolt degradation/failure mechanism(s). The laboratory work scope included visual and stereo-visual examinations of all bolts. Based on the results of these examinations, four bolts - two broken and two intact - were selected for more detailed analysis/testing, including Scanning Electron Microscopy (SEM), Energy Dispersive Spectroscopy (EDS), optical metallography, microhardness, chemical analysis by Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS), Rockwell hardness testing, and tensile testing. The laboratory data indicated the bolts failed by intergranular stress corrosion cracking (IGSCC). There was no evidence that the bolts failed due to fatigue cracking or mechanical overload. (authors)

Fatigue Crack Growth Mechanisms for Nickel-based Superalloy Haynes 282 at 550-750 °C

Science.gov (United States)

Rozman, Kyle A.; Kruzic, Jamie J.; Sears, John S.; Hawk, Jeffrey A.

2015-10-01

The fatigue crack growth rates for nickel-based superalloy Haynes 282 were measured at 550, 650, and 750 °C using compact tension specimens with a load ratio of 0.1 and cyclic loading frequencies of 25 and 0.25 Hz. The crack path was observed to be primarily transgranular for all temperatures, and the observed effect of increasing temperature was to increase the fatigue crack growth rates. The activation energy associated with the increasing crack growth rates over these three temperatures was calculated less than 60 kJ/mol, which is significantly lower than typical creep or oxidation mechanisms; therefore, creep and oxidation cannot explain the increase in fatigue crack growth rates. Transmission electron microscopy was done on selected samples removed from the cyclic plastic zone, and a trend of decreasing dislocation density was observed with increasing temperature. Accordingly, the trend of increasing crack growth rates with increasing temperature was attributed to softening associated with thermally assisted cross slip and dislocation annihilation.

La intervención del pediatra en el niño con labio y paladar hendido

OpenAIRE

Esther Lombardo-Aburto

2017-01-01

Las malformaciones congénitas son defectos estructurales presentes en el nacimiento. Las fisuras labio-alvéolo palatinas tienen una alta incidencia que se presenta en uno de cada 750 recién nacidos vivos, por lo que están entre las malformaciones más frecuentes y mejor conocidas. El labio y paladar hendido son anomalías que comúnmente están asociadas y constituyen las malformaciones congénitas más frecuentes de la cabeza y el cuello. Se define como labio leporino o hendido, fisura labial o qu...

Implantation of multigroup diffusion code 2DB in the IEAv CDC CYBER 170/750 system, and its preliminary evaluation

International Nuclear Information System (INIS)

Prati, A.; Anaf, J.

1988-09-01

The IBM version of the multigroup diffusion code 2DB was implemented in the IEAv CDC CYBER 170/750 system. It was optimized relative to the use of the central memory, limited to 132 K-words, through the memory manager CMM and its partition into three source codes: rectangular and cylindrical geometries, triangular geometry and hexagonal geometry. The reactangular, triangular and hexagonal geometry nodal options were revised and optimized. A fast reactor and a PWR type thermal reactor sample cases were studied. The results are presented and analized. An updated 2DB code user's manual was written in Portugueses and published separately. (author) [pt

Evaluación del desempeño de un secador solar directo sobre semillas de cacao (Theobroma cacao L.

Directory of Open Access Journals (Sweden)

Enrique Romero Frasca

2016-01-01

Full Text Available Se desarrolló un secador solar directo con un diseño basado en dispositivos deshidratadores rudimentarios de uso regular, en granjas cacaoteras de Tabasco; con el objetivo de evaluar su desempeño en la obtención de cacao seco con- forme a la NMX-F-352-S-1980, mediante una exposición a luz solar durante cuatro días. Re- sultados: disminución paulatina del contenido de humedad hasta en un 7.50%, en promedio, en un producto con valor comercial a insertarse en el mercado.

Calculo Preliminar de la Tasa de Meteorización del Batolito Antioqueño, Cordillera Central, Colombia

OpenAIRE

Carolina Garcia; Michel Hermelin

2004-01-01

Este trabajo es una estimación preliminar del tiempo necesario para generar la espesa capa de saprolito que caracteriza el perfil de meteorización actual de un batolito cuarzodiorítico cretácico que aflora en altiplanos de la Cordillera Central de Colombia, entre 5º50' y 7º00' de latitud Norte y 74º50' y 75º35' de longitud Oeste y a alturas entre 750 y 2700 m.Se utilizan datos obtenidos previamente mediante el análisis de la composición química de las aguas superficiales d...

Experimental study of exclusive $^2$H$(e,e^\\prime p)n$ reaction mechanisms at high $Q^2$

Energy Technology Data Exchange (ETDEWEB)

Kim Egiyan; Gegham Asryan; Nerses Gevorgyan; Keith Griffioen; Jean Laget; Sebastian Kuhn; Gary Adams; Moscov Amaryan; Pawel Ambrozewicz; Marco Anghinolfi; Gerard Audit; Harutyun AVAKIAN; Harutyun Avakian; Hovhannes Baghdasaryan; Nathan Baillie; Jacques Ball; Nathan Baltzell; Steve Barrow; Vitaly Baturin; Marco Battaglieri; Ivan Bedlinski; Ivan Bedlinskiy; Mehmet Bektasoglu; Matthew Bellis; Nawal Benmouna; Barry Berman; Angela Biselli; Lukasz Blaszczyk; Sylvain Bouchigny; Sergey Boyarinov; Robert Bradford; Derek Branford; William Briscoe; William Brooks; Stephen Bueltmann; Volker Burkert; Cornel Butuceanu; John Calarco; Sharon Careccia; Daniel Carman; Antoine Cazes; Shifeng Chen; Philip Cole; Patrick Collins; Philip Coltharp; Dieter Cords; Pietro Corvisiero; Donald Crabb; Volker Crede; John Cummings; Natalya Dashyan; Rita De Masi; Raffaella De Vita; Enzo De Sanctis; Pavel Degtiarenko; Haluk Denizli; Lawrence Dennis; Alexandre Deur; Kahanawita Dharmawardane; Richard Dickson; Chaden Djalali; Gail Dodge; Joseph Donnelly; David Doughty; Michael Dugger; Steven Dytman; Oleksandr Dzyubak; Hovanes Egiyan; Lamiaa Elfassi; Latifa Elouadrhiri; Paul Eugenio; Renee Fatemi; Gleb Fedotov; Gerald Feldman; Robert Feuerbach; Robert Fersch; Michel Garcon; Gagik Gavalian; Gerard Gilfoyle; Kevin Giovanetti; Francois-Xavier Girod; John Goetz; Atilla Gonenc; Christopher Gordon; Ralf Gothe; Michel Guidal; Matthieu Guillo; Hayko Guler; Lei Guo; Vardan Gyurjyan; Cynthia Hadjidakis; Kawtar Hafidi; Hayk Hakobyan; Rafael Hakobyan; Charles Hanretty; John Hardie; F. Hersman; Kenneth Hicks; Ishaq Hleiqawi; Maurik Holtrop; Charles Hyde-Wright; Yordanka Ilieva; David Ireland; Boris Ishkhanov; Eugeny Isupov; Mark Ito; David Jenkins; Hyon-Suk Jo; Kyungseon Joo; Henry Juengst; Narbe Kalantarians; James Kellie; Mahbubul Khandaker; Wooyoung Kim; Andreas Klein; Franz Klein; Alexei Klimenko; Mikhail Kossov; Zebulun Krahn; Laird Kramer; V. Kubarovsky; Joachim Kuhn; Sergey Kuleshov; Jeff Lachniet; Jorn Langheinrich; David Lawrence; Ji Li; Kenneth Livingston; Haiyun Lu; Marion MacCormick; Claude Marchand; Nikolai Markov; Paul Mattione; Simeon McAleer; Bryan McKinnon; John McNabb; Bernhard Mecking; Surik Mehrabyan; Joseph Melone; Mac Mestayer; Curtis Meyer; Tsutomu Mibe; Konstantin Mikhaylov; Ralph Minehart; Marco Mirazita; Rory Miskimen; Viktor Mokeev; Kei Moriya; Steven Morrow; Maryam Moteabbed; James Mueller; Edwin Munevar Espitia; Gordon Mutchler; Pawel Nadel-Turonski; Rakhsha Nasseripour; Silvia Niccolai; Gabriel Niculescu; Maria-Ioana Niculescu; Bogdan Niczyporuk; Megh Niroula; Rustam Niyazov; Mina Nozar; Grant O' Rielly; Mikhail Osipenko; Alexander Ostrovidov; Kijun Park; Evgueni Pasyuk; Craig Paterson; Sergio Pereira; Joshua Pierce; Nikolay Pivnyuk; Dinko Pocanic; Oleg Pogorelko; Sergey Pozdnyakov; Barry Preedom; John Price; Yelena Prok; Dan Protopopescu; Brian Raue; Gregory Riccardi; Giovanni Ricco; Marco Ripani; Barry Ritchie; Federico Ronchetti; Guenther Rosner; Patrizia Rossi; Franck Sabatie; Julian Salamanca; Carlos Salgado; Joseph Santoro; Vladimir Sapunenko; Reinhard Schumacher; Vladimir Serov; Youri Sharabian; Nikolay Shvedunov; Alexander Skabelin; Elton Smith; Lee Smith; Daniel Sober; Daria Sokhan; Aleksey Stavinskiy; Samuel Stepanyan; Stepan Stepanyan; Burnham Stokes; Paul Stoler; Steffen Strauch; Mauro Taiuti; David Tedeschi; Ulrike Thoma; Avtandil Tkabladze; Svyatoslav Tkachenko; Luminita Todor; Clarisse Tur; Maurizio Ungaro; Michael Vineyard; Alexander Vlassov; Daniel Watts; Lawrence Weinstein; Dennis Weygand; M. Williams; Elliott Wolin; Michael Wood; Amrit Yegneswaran; Lorenzo Zana; Jixie Zhang; Bo Zhao; Zhiwen Zhao

2007-06-01

The reaction {sup 2}H(e,e{prime} p)n has been studied with full kinematic coverage for photon virtuality 1.75 < 5.5 {approx} GeV{sup 2}. Comparisons of experimental data with theory indicate that for very low values of neutron recoil momentum (p{sub n} < 100 MeV/c) the neutron is primarily a spectator and the reaction can be described by the plane-wave impulse approximation. For 100 < 750 MeV/c proton-neutron rescattering dominates the cross section, while {Delta} production followed by the N{Delta} {yields} NN transition is the primary contribution at higher momenta.

Metabolic evaluation of Crioulo horses participating in competitions of 750 km

Directory of Open Access Journals (Sweden)

Lorena Alvariza Amaral

2013-12-01

Full Text Available The Crioulo breed of horses performs in one of the most physically demanding equestrian competitions, the Marcha de Resistência, which is a contest in which the horses run 750 km in 15 days. The study's aim was to characterize the metabolic responses during this period. We evaluated eleven Crioulo horses in the competition, specifically, two males and nine females. Blood samples were collected 24 hours before the contest and on the 4th, 9th, 11th, 14th and 15th days of competition. We evaluated CK, AST, LDH, glucose, lactate, urea, creatinine, sodium, potassium, chloride, magnesium, total calcium, ionized calcium, total protein, hematocrit and the white blood cell count. At the end of the competition, the mean values of serum AST were 1151±358 IU/ L the mean LDH values were 7418±1695 IU/L and CK was 13,867±3998UI /L. There was a significant increase in urea, creatinine and lactate (p<0.0001. A decrease in the mean values of chloride, sodium, potassium, and total and ionized calcium was observed (p≤0.0002. An evaluation of the total leukocytes and segmented neutrophils (p≤0.0002 revealed their increased values, and decreased values were observed for hematocrit, plasma protein and total lymphocytes (p≤0.0003. The values of glucose, on average, remained constant. Based on these data, we conclude that the Marcha de Resistência competition necessitated a high muscular demand and the depletion of energy and electrolytes, suggesting an inflammatory process in the animals evaluated.

The interactive effects of elevated CO2, temperature and N supply on rice yield

International Nuclear Information System (INIS)

Baysa, Marieta C.; Tremmel, David C.; Reynolds, James F.; Rivero, Gilda C.; Tabbada, Reynaldo A.

2001-01-01

Rice (Oryza sativa L. cv. IR 72)was grown in growth chambers under combinations of two CO 2 (375 and 750 μL L -1 ), temperature(29/21 and 34/26 degrees centigrade day/night) and N (40 and 80 mg L -1 ) regimes from sowing until grain maturity. Panicle production was significantly enhanced by elevated CO 2 with more pronounced effects at high temperature and N. CO 2 -enriched plants grown at high temperatures had lower harvest indices due to reductions in the number of grains per panicle and grain mass. Any potential benefit of increased atmospheric CO 2 on rice grain yield and grain N content under optimal N supply may therefore be dampened by higher temperatures associated with possible future global warming conditions. (Author)

Isotopic evidence of human mobility and diet in a prehistoric/protohistoric Fijian coastal environment (c. 750-150 BP).

Science.gov (United States)

Stantis, Christina; Buckley, Hallie R; Kinaston, Rebecca L; Nunn, Patrick D; Jaouen, Klervia; Richards, Michael P

2016-03-01

Bourewa, on the southwest coast of Viti Levu in Fiji, is a multi-period site that contained burials dated to the later Vuda Phase (750-150 BP), a period of climatic fluctuations that potentially impacted the availability of food resources. We aim to investigate diet and movement at this site during a time of possible ecological pressure and political change. We analyzed δ(13) C, δ(15) N, and (87) Sr/(86) Sr of these Vuda Phase individuals (n = 25) interred at the site. By analyzing dentin and bone, both childhood diet and the diet within the past few years of adults' lives were examined. The paleodietary results suggested that adult diets consisted largely of low trophic level marine organisms. Dentin and bone isotopic values differed significantly: childhood diet involved consumption of more higher trophic level terrestrial foods. Most individuals displayed (87) Sr/(86) Sr ratios expected of people living along a marine coastline. However, a few individuals displayed (87) Sr/(86) Sr ratios and paleodietary values (δ(13) Cdentin , δ(15) Ndentin ) suggestive of living further inland or consuming a more terrestrial-based childhood diet. The results are compared with past studies of sites from Fiji and nearby archipelagoes, placing our interpretations into a wider regional context. The Bourewa community appears to have consumed more low trophic level marine foods than any nearby site, possibly because terrestrial foods were more difficult to acquire. Interpreting the childhood diet is challenging due to the paucity of ethnohistoric literature on Fijian childhood; small meals outside of communal mealtimes or feeding children terrestrial animal protein as a means of cultural buffering are potential explanations. © 2015 Wiley Periodicals, Inc.

Estudio cinético de la descomposición térmica del carbonato de Estroncio en el sistema SrCO3-Al2O3-SrSO4

Directory of Open Access Journals (Sweden)

Torres T, J.

2008-10-01

Full Text Available The thermal decomposition of strontium carbonate in the SrCO3-Al2O3-SrSO4 system was studied by thermal analysis under isothermal experiments. Powder of reactive grade of SrCO3, Al2O3 y SrSO4 in molar ratio 3:3:1 were prepared. The powders were heat treated from 750 to 1000 °C for 4 h. Loss weight for each temperature was registered and the kinetics parameter were determine using the classical fit method. The effect of mechanical activation of SrCO3 was studied as well. The reaction mechanism for 750 to 900 °C temperature range corresponded to a geometric shrinkage in the grain boundary (R1.1 with an activation energy of 106. 21 Kjmol-1. The reaction mechanism for 900 to 1100 °C temperature range corresponded to a nucleation and growing (P1.1 with an activation energy of 44.87 Kjmol-1. The activation energy was reduced in 35% for the samples that contained SrCO3 mechanically activated.La cinética de descomposición térmica del carbonato de Estroncio (SrCO3 en el sistema SrCO3-Al2O3-SrSO4 se estudió por medio de análisis térmico gravimétrico (ATG, utilizando el método isotérmico. Se prepararon mezclas de polvos 3:3:1 molar de SrCO3, Al2O3 y SrSO4 grado reactivo, las cuales fueron homogenizadas y tratadas a temperaturas entre 750 hasta 1100°C, por periodo de 4 horas. Adicionalmente se estudio el efecto del tiempo de activación mecánica del SrCO3 sobre la cinética de descomposición. Se obtuvieron curvas representativas de la pérdida de peso de las muestras al incrementar la temperatura, a partir de ellas se realizó el estudio cinético. Para el rango de temperatura de 750 a 900°C, el mecanismo de reacción que rige el proceso de descomposición corresponde a una contracción geométrica mediante la frontera de grano (R1.1 con una energía de activación (Ea de 106.21KJmol-1. En el rango de temperatura de 950 a 1100°C, el mecanismo de reacción que rige la descomposición corresponde a un proceso de nucleación y crecimiento (P1

Hydrogen incorporation in high hole density GaN:Mg

Science.gov (United States)

Zvanut, M. E.; Uprety, Y.; Dashdorj, J.; Moseley, M.; Doolittle, W. Alan

2011-03-01

We investigate hydrogen passivation in heavily doped p-type GaN using electron paramagnetic resonance (EPR) spectroscopy. Samples include both conventionally grown GaN (1019 cm-3 Mg, 1017 cm-3 holes) and films grown by metal modulation epitaxy (MME), which yielded higher Mg (1- 4 x 1020 cm-3) and hole (1- 40 x 1018 cm-3) densities than found in conventionally grown GaN. The Mg acceptor signal is monitored throughout 30 minute annealing steps in N2 :H2 (92%:7%)) and subsequently pure N2 . N2 :H2 heat treatments of the lower hole density films begin to reduce the Mg EPR intensity at 750 o C, but quench the signal in high hole density films at 600 o C. Revival of the signal by subsequent N2 annealing occurs at 800 o C for the low hole density material and 600 o C in MME GaN. The present work highlights chemical differences between heavily Mg doped and lower doped films; however, it is unclear whether the difference is due to changes in hydrogen-Mg complex formation or hydrogen diffusion. The work at UAB is supported by the NSF.

NLO predictions for the production of a (750 GeV) spin-two particle at the LHC

CERN Document Server

Das, Goutam; Hirschi, Valentin; Maltoni, Fabio; Shao, Hua-Sheng

2017-07-10

We obtain predictions accurate at the next-to-leading order in QCD for the production of a generic spin-two particle in the most relevant channels at the LHC: production in association with colored particles (inclusive, one jet, two jets and $t\\bar t$), with vector bosons ($Z,W^\\pm,\\gamma$) and with the Higgs boson. We present total and differential cross sections as well as branching ratios corresponding to a spin-2 particle of 750 GeV of mass, possibly with non-universal couplings to standard model particles, at 13 TeV of center-of-mass energy. We find that the next-to-leading order corrections give rise to sizeable $K$ factors for many channels, in some cases exposing the unitarity-violating behaviour of non-universal couplings scenarios, and in general greatly reduce the theoretical uncertainties. Our predictions are publicly available in the \\amc\\ framework and can, therefore, be directly used in experimental simulations for any value of the mass and couplings.

Inhibition of stress corrosion cracking of Alloy X-750 by prestrain

International Nuclear Information System (INIS)

Mills, W.J.; Lebo, M.R.; Kearns, J.J.

1997-03-01

Tests of precracked and as-notched compact tension specimens were conducted in 3600C hydrogenated water to determine the effect of prestrain on the stress corrosion cracking (SCC) resistance of Alloy X-750 in the HTH, AH and HOA heat treated conditions. Prestraining is defined as the intentional application of an initial load (or strain) that is higher than the final test load. Prestrain was varied from 10% to 40% (i.e., the initial to final load ratios ranged from 1.1 to 1.4). Other variables included notch root radius, stress level and irradiation. Specimens were bolt-loaded to maintain essentially constant displacement conditions during the course of the test. The frequent heat up and cooldown cycles that were necessary for periodic inspections provided an opportunity to evaluate the effect of test variables on rapid low temperature crack propagation to which this alloy is subject. For Condition HTH, application of 20% to 40% prestrain either eliminates or significantly retards SCC initiation in as-notched specimens and the onset of crack growth in precracked specimens. In addition, this procedure reduces the propensity for low temperature crack growth during cooldown. Similar results were observed for precracked HOA specimens. Application of 20% prestrain also retards SCC in as-notched and precracked AH specimens, but the effects are not as great as in Condition HTH. Prestraining at the 10% level was found to produce an inconsistent benefit. In-reactor SCC testing shows that prestrain greatly improves the in-flux and out-of-flux SCC resistance of Condition HTH material. No SCC was observed in precracked specimens prestrained 30%, whereas extensive cracking was observed in their nonprestrain counterparts

Mapa Geologico de Venezuela a Escala 1:750,000

Science.gov (United States)

Hackley, Paul C.; Urbani, Franco; Karlsen, Alex W.; Garrity, Christopher P.

2006-01-01

Se presenta un mapa geologico digital de Venezuela sobre un fondo de relieve sombreado. Los datos geologicos e hidrologicos del norte del rio Orinoco proceden de la digitalizacion de mapas geologicos en papel a escala 1:500.000. Estos datos fueron integrados con el mapa geologico digital del Escudo de Guayana Venezolano, a su vez derivado de hojas en papel a escala 1:500.000. La informacion sobre los tipos de fallas mostrados en el mapa es igual que en las fuentes originales. Los poligonos geologicos fueron atribuidos por edad, litologia y nombre de la unidad siguiendo el Codigo geologico de Venezuela. Se incorporaron revisiones significativas de la geologia de la Cordillera de la Costa a partir de las nuevas hojas integradas a escala 1:25.000. Toda esta informacion geologico-estructural se sobrepuso a una imagen de relieve sombreado, producida por el procesamiento de los datos de radar interferometrico con 90 m (3 arcosegundos) de resolucion espacial obtenidos por la mision topografica de radar del transbordador espacial (SRTM). Las areas de la base de datos del SRTM carentes de informacion fueron llenadas por medio de la interpolacion de los datos de las celdas adyacentes. Para producir la imagen de relieve sombreado se uso una direccion de iluminacion de 315 deg con un angulo de 65 deg sobre el horizonte. La proyeccion usada en el mapa es conica equidistante, con latitudes de 4 y 9 deg norte como paralelos estandar y una longitud de 66 deg al oeste como meridiano central. Los datos en el mapa proceden primordialment de hojas a escala 1:500.000 y el producto esta preparado para una impresion optima en escala 1:750.000. Los usuarios pueden obtener ampliaciones mayores, sin embargo no se garantiza la precision del mapa a escalas mas detalladas. Especialmente en la region de Guayana, al sobreponer los mapas geologicos sobre la reciente imagen SRTM, se notan grandes discrepancias no sistematicas tanto en contactos como en fallas. Esto es debido a que los mapas

Episodic nature of continental arc activity since 750 Ma: A global compilation

Science.gov (United States)

Cao, Wenrong; Lee, Cin-Ty A.; Lackey, Jade Star

2017-03-01

Continental arcs have been recently hypothesized to outflux large amounts of CO2 compared to island arcs so that global flare-ups in continental arc magmatism might drive long-term greenhouse events. Quantitative testing of this hypothesis, however, has been limited by the lack of detailed studies on the spatial distribution of continental arcs through time. Here, we compile a worldwide database of geological maps and associated literature to delineate the surface exposure of granitoid plutons, allowing reconstruction of how the surface area addition rate of granitoids and the length of continental arcs have varied since 750 Ma. These results were integrated into an ArcGIS framework and plate reconstruction models. We find that the spatial extent of continental arcs is episodic with time and broadly matches the detrital zircon age record. Most vigorous arc magmatism occurred during the 670-480 Ma and the 250-50 Ma when major greenhouse events are recognized. Low continental arc activity characterized most of the Cryogenian, middle-late Paleozoic, and Cenozoic when climate was cold. Our results indicate that plate tectonics is not steady, with fluctuations in the nature of subduction zones possibly related in time to the assembly and dispersal of continents. Our results corroborate the hypothesis that variations in continental arc activity may play a first order role in driving long-term climate change. The dataset presented here provides a quantitative basis for upscaling continental arc processes to explore their effects on mountain building, climate, and crustal growth on a global scale.

Mechatronic modeling of a 750kW fixed-speed wind energy conversion system using the Bond Graph Approach.

Science.gov (United States)

Khaouch, Zakaria; Zekraoui, Mustapha; Bengourram, Jamaa; Kouider, Nourreeddine; Mabrouki, Mustapha

2016-11-01

In this paper, we would like to focus on modeling main parts of the wind turbines (blades, gearbox, tower, generator and pitching system) from a mechatronics viewpoint using the Bond-Graph Approach (BGA). Then, these parts are combined together in order to simulate the complete system. Moreover, the real dynamic behavior of the wind turbine is taken into account and with the new model; final load simulation is more realistic offering benefits and reliable system performance. This model can be used to develop control algorithms to reduce fatigue loads and enhance power production. Different simulations are carried-out in order to validate the proposed wind turbine model, using real data provided in the open literature (blade profile and gearbox parameters for a 750 kW wind turbine). Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

Dynamic Water Surface Detection Algorithm Applied on PROBA-V Multispectral Data

Directory of Open Access Journals (Sweden)

Luc Bertels

2016-12-01

Full Text Available Water body detection worldwide using spaceborne remote sensing is a challenging task. A global scale multi-temporal and multi-spectral image analysis method for water body detection was developed. The PROBA-V microsatellite has been fully operational since December 2013 and delivers daily near-global synthesis with a spatial resolution of 1 km and 333 m. The Red, Near-InfRared (NIR and Short Wave InfRared (SWIR bands of the atmospherically corrected 10-day synthesis images are first Hue, Saturation and Value (HSV color transformed and subsequently used in a decision tree classification for water body detection. To minimize commission errors four additional data layers are used: the Normalized Difference Vegetation Index (NDVI, Water Body Potential Mask (WBPM, Permanent Glacier Mask (PGM and Volcanic Soil Mask (VSM. Threshold values on the hue and value bands, expressed by a parabolic function, are used to detect the water bodies. Beside the water bodies layer, a quality layer, based on the water bodies occurrences, is available in the output product. The performance of the Water Bodies Detection Algorithm (WBDA was assessed using Landsat 8 scenes over 15 regions selected worldwide. A mean Commission Error (CE of 1.5% was obtained while a mean Omission Error (OE of 15.4% was obtained for minimum Water Surface Ratio (WSR = 0.5 and drops to 9.8% for minimum WSR = 0.6. Here, WSR is defined as the fraction of the PROBA-V pixel covered by water as derived from high spatial resolution images, e.g., Landsat 8. Both the CE = 1.5% and OE = 9.8% (WSR = 0.6 fall within the user requirements of 15%. The WBDA is fully operational in the Copernicus Global Land Service and products are freely available.

Crystal structure study of dielectric oxynitride perovskites La{sub 1−x}Sr{sub x}TiO{sub 2+x}N{sub 1−x} (x=0, 0.2)

Energy Technology Data Exchange (ETDEWEB)

Habu, Daiki; Masubuchi, Yuji [Faculty of Engineering, Hokkaido University, N13W8, Kita-ku, Sapporo 060-8628 (Japan); Torii, Shuki [Institute of Materials Structure Science, High Energy Accelerator Organization, 203-1, Shirakata, Tokai-Mura, Naka-gun, Ibaraki 319-1106 (Japan); Kamiyama, Takashi [Institute of Materials Structure Science, High Energy Accelerator Organization, 203-1, Shirakata, Tokai-Mura, Naka-gun, Ibaraki 319-1106 (Japan); School of High Energy Accelerator Science, Sokendai (The Graduate University for Advanced Studies), Tokai 319-1106 (Japan); Kikkawa, Shinichi, E-mail: kikkawa@eng.hokudai.ac.jp [Faculty of Engineering, Hokkaido University, N13W8, Kita-ku, Sapporo 060-8628 (Japan)

2016-05-15

As is the case with SrTaO{sub 2}N, both cis-ordering of nitride anions and octahedral titling are also preferable in La{sub 1−x}Sr{sub x}TiO{sub 2+x}N{sub 1−x} (x=0, 0.2) oxynitride perovskites. A larger dielectric constant of ε{sub r}≈5.0×10{sup 3} was estimated for the pure oxynitride with x=0.2, compared with ε{sub r}≈750 for the product with x=0, by extrapolating the ε{sub r} values obtained from powders mixed with paraffin at various mixing ratios. The crystal structure of x=0.2 with larger tolerance factor than x=0 increased the octahedral tilting, which contributes to the increased dielectric constant. The increased dielectric constant supports the exchange mechanism for the dielectric property between two kinds of –Ti–N– helical coils (clockwise and anticlockwise) derived from the above cis-ordering of nitride anions. - Graphical abstract: Very large dielectric constant values were estimated for La{sub 1−x}Sr{sub x}TiO{sub 2+x}N{sub 1−x}; ε{sub r}≈5.0×10{sup 3} in x=0.2 and ε{sub r}≈750 in x=0. - Highlights: • Cis-configuration of nitride anions was confirmed in La{sub 1−x}Sr{sub x}TiO{sub 2+x}N{sub 1−x} (x=0, 0.2). • Dielectric constant values were estimated to be 750 for x=0 and 5.0×10{sup 3} for x=0.2, respectively. • The large dielectric property is to the exchange mechanism between clockwise and anticlockwise –Ti–N– coil motifs.

III-Nitrides growth and AlGaN/GaN heterostructures on ferroelectric materials

International Nuclear Information System (INIS)

Lee, Kyoung-Keun; Namkoong, Gon; Madison, Shannon M.; Ralph, Stephen E.; Doolittle, W. Alan; Losurdo, Maria; Bruno, Giovanni; Cho, Hyung Koun

2007-01-01

The growth of III-nitrides on the ferroelectric materials lithium niobate (LN) and lithium tantalate (LT) via molecular beam epitaxy (MBE) using rf plasma source has been investigated. We have found that gallium nitride (GaN) epitaxial layers have a crystalline relationship with lithium niobate (tantalate) as follows: (0 0 0 1) GaN || (0 0 0 1) LN (LT) with [10-10] GaN || [11-20] LN (LT). The surface stability of LN and LT substrates has been monitored by in situ spectroscopic ellipsometry in the vacuum chamber. Three different temperature zones have been discerned; surface degas and loss of OH group (100-350 deg. C); surface segregation/accumulation of Li and O-species (400-700 deg. C); surface evaporation of O-species and Li desorption (over 750 deg. C). However, LT shows only surface degassing in the range of 100-800 deg. C. Therefore, congruent LN substrates were chemically unstable at the growth temperature of 550-650 deg. C, and therefore developed an additional phase of Li-deficient lithium niobate (LiNb 3 O 8 ) along with lithium niobate (LiNbO 3 ), confirmed by X-ray diffraction. On the other hand, LT showed better chemical stability at these temperatures, with no additional phase development. The structural quality of GaN epitaxial layers has shown slight improvement on LT substrates over LN substrates, according to X-ray diffraction. Herein, we demonstrate AlGaN/GaN heterostructure devices on ferroelectric materials that will allow future development of multifunctional electrical and optical applications

III-Nitrides growth and AlGaN/GaN heterostructures on ferroelectric materials

Energy Technology Data Exchange (ETDEWEB)

Lee, Kyoung-Keun [Georgia Institute of Technology, School of Electrical and Computer Engineering, 777 Atlantic Dr., Atlanta, GA 30332 (United States); Namkoong, Gon [Old Dominion University, Department of Electrical and Computer Engineering, Norfolk, VA 23529 (United States); Madison, Shannon M. [Georgia Institute of Technology, School of Electrical and Computer Engineering, 777 Atlantic Dr., Atlanta, GA 30332 (United States); Ralph, Stephen E. [Georgia Institute of Technology, School of Electrical and Computer Engineering, 777 Atlantic Dr., Atlanta, GA 30332 (United States); Doolittle, W. Alan [Georgia Institute of Technology, School of Electrical and Computer Engineering, 777 Atlantic Dr., Atlanta, GA 30332 (United States)]. E-mail: alan.doolittle@ece.gatech.edu; Losurdo, Maria [Institute of Inorganic Methodologies and of Plasmas, IMIP-CNR, Department of Chemistry, University of Bari, via Orabona, 4 70126 Bari (Italy); Bruno, Giovanni [Institute of Inorganic Methodologies and of Plasmas, IMIP-CNR, Department of Chemistry, University of Bari, via Orabona, 4 70126 Bari (Italy); Cho, Hyung Koun [Department of Materials Science and Engineering, Sung Kyun Kwan University, Suwon 440-746 (Korea, Republic of)

2007-06-15

The growth of III-nitrides on the ferroelectric materials lithium niobate (LN) and lithium tantalate (LT) via molecular beam epitaxy (MBE) using rf plasma source has been investigated. We have found that gallium nitride (GaN) epitaxial layers have a crystalline relationship with lithium niobate (tantalate) as follows: (0 0 0 1) GaN || (0 0 0 1) LN (LT) with [10-10] GaN || [11-20] LN (LT). The surface stability of LN and LT substrates has been monitored by in situ spectroscopic ellipsometry in the vacuum chamber. Three different temperature zones have been discerned; surface degas and loss of OH group (100-350 deg. C); surface segregation/accumulation of Li and O-species (400-700 deg. C); surface evaporation of O-species and Li desorption (over 750 deg. C). However, LT shows only surface degassing in the range of 100-800 deg. C. Therefore, congruent LN substrates were chemically unstable at the growth temperature of 550-650 deg. C, and therefore developed an additional phase of Li-deficient lithium niobate (LiNb{sub 3}O{sub 8}) along with lithium niobate (LiNbO{sub 3}), confirmed by X-ray diffraction. On the other hand, LT showed better chemical stability at these temperatures, with no additional phase development. The structural quality of GaN epitaxial layers has shown slight improvement on LT substrates over LN substrates, according to X-ray diffraction. Herein, we demonstrate AlGaN/GaN heterostructure devices on ferroelectric materials that will allow future development of multifunctional electrical and optical applications.

Artifact suppression in electron paramagnetic resonance imaging of 14N- and 15N-labeled nitroxyl radicals with asymmetric absorption spectra

Science.gov (United States)

Takahashi, Wataru; Miyake, Yusuke; Hirata, Hiroshi

2014-10-01

This article describes an improved method for suppressing image artifacts in the visualization of 14N- and 15N-labeled nitroxyl radicals in a single image scan using electron paramagnetic resonance (EPR). The purpose of this work was to solve the problem of asymmetric EPR absorption spectra in spectral processing. A hybrid function of Gaussian and Lorentzian lineshapes was used to perform spectral line-fitting to successfully separate the two kinds of nitroxyl radicals. This approach can process the asymmetric EPR absorption spectra of the nitroxyl radicals being measured, and can suppress image artifacts due to spectral asymmetry. With this improved visualization method and a 750-MHz continuous-wave EPR imager, a temporal change in the distributions of a two-phase paraffin oil and water/glycerin solution system was visualized using lipophilic and hydrophilic nitroxyl radicals, i.e., 2-(14-carboxytetradecyl)-2-ethyl-4,4-dimethyl-3-oxazolidinyloxy (16-DOXYL stearic acid) and 4-hydroxyl-2,2,6,6-tetramethylpiperidine-d17-1-15N-1-oxyl (TEMPOL-d17-15N). The results of the two-phase separation experiment verified that reasonable artifact suppression could be achieved by the present method that deals with asymmetric absorption spectra in the EPR imaging of 14N- and 15N-labeled nitroxyl radicals.

Effects of various weaning times on growth performance, rumen fermentation and microbial population of yellow cattle calves

Science.gov (United States)

Mao, Huiling; Xia, Yuefeng; Tu, Yan; Wang, Chong; Diao, Qiyu

2017-01-01

Objective This study was conducted to investigate the effects of weaning times on the growth performance, rumen fermentation and microbial communities of yellow cattle calves. Methods Eighteen calves were assigned to a conventional management group that was normally weaned (NW, n = 3) or to early weaned (EW) group where calves were weaned when the feed intake of solid feed (starter) reached 500 g (EW500, n = 5), 750 g (EW750, n = 5), or 1,000 g (EW1,000, n = 5). Results Compared with NW, the EW treatments increased average daily gain (pcalves in EW750 had a higher (pintake than those in EW1,000 from wk 9 to the end of the trial. The concentrations of total volatile fatty acids in EW750 were greater than in NW and EW1,000 (p0.05), but changes in bacterial composition were found. Conclusion From the present study, it is inferred that EW is beneficial for rumen fermentation, and weaning when the feed intake of the starter reached 750 g showed much better results. PMID:28423879

Microstructures and growth mechanisms of GaN films epitaxially grown on AlN/Si hetero-structures by pulsed laser deposition at different temperatures.

Science.gov (United States)

Wang, Wenliang; Yang, Weijia; Lin, Yunhao; Zhou, Shizhong; Li, Guoqiang

2015-11-13

2 inch-diameter GaN films with homogeneous thickness distribution have been grown on AlN/Si(111) hetero-structures by pulsed laser deposition (PLD) with laser rastering technique. The surface morphology, crystalline quality, and interfacial property of as-grown GaN films are characterized in detail. By optimizing the laser rastering program, the ~300 nm-thick GaN films grown at 750 °C show a root-mean-square (RMS) thickness inhomogeneity of 3.0%, very smooth surface with a RMS surface roughness of 3.0 nm, full-width at half-maximums (FWHMs) for GaN(0002) and GaN(102) X-ray rocking curves of 0.7° and 0.8°, respectively, and sharp and abrupt AlN/GaN hetero-interfaces. With the increase in the growth temperature from 550 to 850 °C, the surface morphology, crystalline quality, and interfacial property of as-grown ~300 nm-thick GaN films are gradually improved at first and then decreased. Based on the characterizations, the corresponding growth mechanisms of GaN films grown on AlN/Si hetero-structures by PLD with various growth temperatures are hence proposed. This work would be beneficial to understanding the further insight of the GaN films grown on Si(111) substrates by PLD for the application of GaN-based devices.

Caracterización microestructural del compuesto intermetálico AI₇Cu₄Ni

Directory of Open Access Journals (Sweden)

Herrera, R.

2004-04-01

Full Text Available A study of the microstructural characterization of the intermetallic compound Al₇Cu₄Ni was carried out. The intermetallic compound was fabricated using the melting and casting process followed by a homogenization treatment at 750 °C for 240 h. The structural evolution during homogenizing was analyzed by X-ray diffraction. The microstructure of intermetallic compound was also characterized by scanning electron and transmission electron microscopies. Additionally, the microhomogeneity of this compound was studied by the Energy Dispersive and Wavelength Dispersive Spectroscopy. The results of this work showed that it was possible to obtain the intermetallic compound with the crystalline structure and at the composition reported in the literature. Besides, this compound showed a good chemical microhomogeneity, which makes it a possible candidate as a material reference for either microanalysis or hardness testing.

Se llevó a cabo un estudio de caracterización microestmctural del compuesto intermetálico AI₇Cu₄Ni, que se fabricó por fusión y moldeo y un posterior recocido de homogeneización a 750 °C, durante 480 h. La evolución estructural durante el recocido de homogeneización se siguió por difracción de rayos X. La microestructura se caracterizó por microscopía electrónica de barrido y transmisión. Asimismo, se estudió la microhomogeneidad química del compuesto intermetálico, utilizando las técnicas de microanálisis de dispersión de energía y de longitud de onda de rayos X. Los resultados verificaron que es posible obtener el compuesto intermetálico AI₇Cu₄Ni con la estructura cristalina y en la composición reflejada en la literatura. Además, su buena microhomegeneidad química sugiere su posible aplicación como un material de referencia para la técnica de microanálisis o el ensayo de dureza.

Influence of nitrogen loading and plant nitrogen assimilation on nitrogen leaching and N₂O emission in forage rice paddy fields fertilized with liquid cattle waste.

Science.gov (United States)

Riya, Shohei; Zhou, Sheng; Kobara, Yuso; Sagehashi, Masaki; Terada, Akihiko; Hosomi, Masaaki

2015-04-01

Livestock wastewater disposal onto rice paddy fields is a cost- and labor-effective way to treat wastewater and cultivate rice crops. We evaluated the influence of nitrogen loading rates on nitrogen assimilation by rice plants and on nitrogen losses (leaching and N2O emission) in forage rice fields receiving liquid cattle waste (LCW). Four forage rice fields were subjected to nitrogen loads of 107, 258, 522, and 786 kg N ha(-1) (N100, N250, N500, and N750, respectively) using basal fertilizer (chemical fertilizer) (50 kg N ha(-1)) and three LCW topdressings (each 57-284 kg N ha(-1)). Nitrogen assimilated by rice plants increased over time. However, after the third topdressing, the nitrogen content of the biomass did not increase in any treatment. Harvested aboveground biomass contained 93, 60, 33, and 31 % of applied nitrogen in N100, N250, N500, and N750, respectively. The NH4 (+) concentration in the pore water at a depth of 20 cm was less than 1 mg N L(-1) in N100, N250, and N500 throughout the cultivation period, while the NH4 (+) concentration in N750 increased to 3 mg N L(-1) after the third topdressing. Cumulative N2O emissions ranged from -0.042 to 2.39 kg N ha(-1); the highest value was observed in N750, followed by N500. In N750, N2O emitted during the final drainage accounted for 80 % of cumulative N2O emissions. This study suggested that 100-258 kg N ha(-1) is a recommended nitrogen loading rate for nitrogen recovery by rice plants without negative environmental impacts such as groundwater pollution and N2O emission.

Grain-boundary sliding in a TiAl alloy with fine-grained duplex microstructure during 750 deg. C creep

Energy Technology Data Exchange (ETDEWEB)

Peter, D. [Ruhr University Bochum, Institute for Materials, D-44780 Bochum (Germany); Viswanathan, G.B., E-mail: Viswanathan.11@osu.edu [Ruhr University Bochum, Institute for Materials, D-44780 Bochum (Germany) and Department of Materials Science and Engineering, Ohio State University, Columbus, OH 43210 (United States); Wagner, M.F.-X.; Eggeler, G. [Ruhr University Bochum, Institute for Materials, D-44780 Bochum (Germany)

2009-06-15

Constant-load creep experiments at a temperature of 750 deg. C and a nominal stress of 300 MPa were conducted on a fine-grained Ti-45Al-5Nb-0.2B-0.2C (in at.%) alloy with a duplex microstructure. Microstructures before and after creep (accumulated strain: 9.6%) were analyzed using scanning and transmission electron microscopy (SEM and TEM). TEM analysis after creep indicates that the individual microstructural constituents of the fine duplex microstructure, namely, the equiaxed {gamma} and the lamellar {alpha}{sub 2}/{gamma} colonies, undergo varying degrees of deformation and develop various substructures. Lamellar grains deform by dislocation creep. They show clear evidence for dislocation and twin activity. In contrast, only few dislocations are found in the equiaxed grains. We show that the regions with small equiaxed {gamma} grains, representing 65-75 vol.% of the microstructure, deform by grain-boundary sliding.

Grain-boundary sliding in a TiAl alloy with fine-grained duplex microstructure during 750 deg. C creep

International Nuclear Information System (INIS)

Peter, D.; Viswanathan, G.B.; Wagner, M.F.-X.; Eggeler, G.

2009-01-01

Constant-load creep experiments at a temperature of 750 deg. C and a nominal stress of 300 MPa were conducted on a fine-grained Ti-45Al-5Nb-0.2B-0.2C (in at.%) alloy with a duplex microstructure. Microstructures before and after creep (accumulated strain: 9.6%) were analyzed using scanning and transmission electron microscopy (SEM and TEM). TEM analysis after creep indicates that the individual microstructural constituents of the fine duplex microstructure, namely, the equiaxed γ and the lamellar α 2 /γ colonies, undergo varying degrees of deformation and develop various substructures. Lamellar grains deform by dislocation creep. They show clear evidence for dislocation and twin activity. In contrast, only few dislocations are found in the equiaxed grains. We show that the regions with small equiaxed γ grains, representing 65-75 vol.% of the microstructure, deform by grain-boundary sliding.

Gasificación con CO2 de carbonizados de aserrín de Pinus caribaea Morelet var. cariba

Directory of Open Access Journals (Sweden)

F. Márquez-Montesino

2004-01-01

Full Text Available Dada la importancia del estudio de la reactividad de los carbones con el fin de estudiar su activación, se desarrolló la gasificación con CO2 de un carbón obtenido de aserrín de Pinus caribaea. Los ensayos termogravimétricos se realizaron en un sistema modular de CI Electronics, las temperaturas de gasificación escogidas fueron 750, 775, 800 y 825 °C. Para calcular los valores de reactividad normalizada, se determinó el área de superficie por adsorción de CO2 a 273 K, en un equipo Autosorb-1 de Quantachrome Corporation sobre muestras desgasificadas a 180 °C y un vacío igual o mayor de 50 mtorr durante 8 h. De la gasificación con CO2 se representó gráficamente la reactividad frente a valores de conversión del carbonizado, indicando un aumento de la reactividad con el aumento de la temperatura de gasificación, lo que se explica por el desarrollo del área de superficie con el avance de la reacción y el efecto catalítico del mineral al aumentar su concentración en el sustrato. La representación gráfica de la ecuación de Arrhenius para la reactividad, indica que en las condiciones estudiadas en termobalanza, el proceso de gasificación ocurre bajo control de la etapa química, donde el valor de la energía de activación aparente es de ± 234 kJ/mol.

Preparation of TNAs/NiO p-n heterojunction and their applications in UV photosensor

Science.gov (United States)

Yusoff, M. M.; Mamat, M. H.; Malek, M. F.; Abdullah, M. A. R.; Ismail, A. S.; Saidi, S. A.; Mohamed, R.; Suriani, A. B.; Khusaimi, Z.; Rusop, M.

2018-05-01

A nanocomposite consisted of n-type titanium dioxide (TiO2) nanorod arrays (TNAs) and p-type nickel oxide (NiO) were deposited using a novel facile low-temperature aqueous chemical route (ACR) in a Schott bottle with cap clamps and sol-gel spin coating method, respectively on a transparent conductive oxide (TCO) glass substrate for the application of ultraviolet (UV) photosensor. The p-n heterojunction photosensor exhibited an increase in photocurrent under UV light (365 nm, 750 µW/cm2) at applied reverse bias. The measured UV response also revealed an increase in photocurrent, and dark current with increasing applied reverse bias on the p-n heterojunction. In this study, the fabricated TNAs/NiO composite nanostructures showed potential applications for photosensor based on the steady photocurrent results obtained under UV irradiation

Experimental determination of the constitution and the phase relationships in Zr (2.5-8.0)at.%Nb (0-6.7)at.%Al alloys with 750at.ppm0 and 250at.ppmN, between 730-900 deg C

International Nuclear Information System (INIS)

Peruzzi Bardella, A.; Bolcich, J.C.

1990-01-01

Zr alloys with 2.5 to 8.0 at%Nb and 0 to 6.7 at%Al, were subjected to dynamic and static treatments between 730-900 deg C and studied by qualitative and quantitative optical metallography, electrical resistance, X-ray diffractometry and electron microanalysis. The experimental data were analyzed by taking into account the effects of oxygen and nitrogen impurities. The main results for Zr-Nb-Al alloys with 750 at.ppm0 and 250 at.ppmN are the following: a) Equilibrium relationships are established between α (hcp), β (bcc) and Zr 3 Al (Cu 3 Au) phases along isothermal sections at 730, 771 and 800 deg C. b) β/α+β boundaries are determined along iso-aluminium vertical sections at 6.7, 3.3 and 0 at%Al. As for the first two iso-aluminium sections, the β/α+β equilibrium boundary corresponding to the binary Zr-Nb system is found to have a positive curvature, which is contrary to what has been reported in the literature. The increase in the Al content shifts the T β/α+β at a rate of 5.1 to 8.5 deg C/at.%Al, depending on Nb content. c) The addition of Al to Zr-Nb alloys increases the partial solubility of Nb in the α phase, its maximum value at 730 deg C being about 0.7-0.8 at% for 4 at%Al. d) Solubility values for Al in α-phase of Zr-Al were estimated by extrapolation from ternary alloys. These estimates help to solve an existing discrepancy on the Zr-Al system. (Author)

Emission control of InGaN nanocolumns grown by molecular-beam epitaxy on Si(111) substrates

International Nuclear Information System (INIS)

Albert, S.; Bengoechea-Encabo, A.; Sanchez-Garcia, M. A.; Calleja, E.; Lefebvre, P.; Jahn, U.; Trampert, A.

2011-01-01

This work studies the effect of the growth temperature on the morphology and emission characteristics of self-assembled InGaN nanocolumns grown by plasma assisted molecular beam epitaxy. Morphology changes are assessed by scanning electron microscopy, while emission is measured by photoluminescence. Within the growth temperature range of 750 to 650 deg. C, an increase in In incorporation for decreasing temperature is observed. This effect allows tailoring the InGaN nanocolumns emission line shape by using temperature gradients during growth. Depending on the gradient rate, span, and sign, broad emission line shapes are obtained, covering the yellow to green range, even yielding white emission.

Prolongación de la autopista A-13 - París - Francia y eje norte-sur Bruselas – Bélgica

Directory of Open Access Journals (Sweden)

Editorial, Equipo

1976-12-01

Full Text Available Extensión of the A-13 highway -París – France In order to join the highway of the West and the Peripherie Boulevard of Paris, a 750 m long, covered excavation has been carried out between the Seine and the Boulogne Gate. It consists of: — Two lateral walls and one central wall. — A prestressed concrete roof. — A reinforced concrete ground sill. The prefabricated system panosol has been used in the three walls; the two lateral ones are continuous, whereas the central one is discontinued. Here the procedure has been that of poured concrete and in the foundations cast concrete was used. Axis North-East - Brussels - Belgium This article describes the underground works that connect the railway lines, the bus lines and the suburban train, creating two additional inferior levels: one for the wagon garage and another one for a parking place. The required depth for these works is 22 m which has made it necessary to adopt structurally quite complicated systems of piling and core walls, though these technical problems have been solved in the best possible manner.Entre las obras realizadas para unir la autopista del Oeste y el Bulevar Periférico de París se encuentra una excavación cubierta de unos 750 m de longitud, entro el Sena y la Puerta de Boulogne. Esta excavación comprende: — Dos muros laterales y uno central. — Una cubierta de hormigón pretensado. — Una solera de hormigón armado. Los tres muros se han realizado por el sistema prefabricado Panosol; los laterales a base de muro continuo y el central con muro discontinuo. Este procedimiento se sirve de hormigón colado, mientras que los cimientos son de hormigón moldeado.

Precision tools and models to narrow in on the 750 GeV diphoton resonance

International Nuclear Information System (INIS)

Staub, Florian; Athron, Peter; Basso, Lorenzo

2016-02-01

The hints for a new resonance at 750 GeV from ATLAS and CMS have triggered a significant amount of attention. Since the simplest extensions of the standard model cannot accommodate the observation, many alternatives have been considered to explain the excess. Here we focus on several proposed renormalisable weakly-coupled models and revisit results given in the literature. We point out that physically important subtleties are often missed or neglected. To facilitate the study of the excess we have created a collection of 40 model files, selected from recent literature, for the Mathematica package SARAH. With SARAH one can generate files to perform numerical studies using the tailor-made spectrum generators FlexibleSUSY and SPheno. These have been extended to automatically include crucial higher order corrections to the diphoton and digluon decay rates for both CP-even and CP-odd scalars. Additionally, we have extended the UFO and CalcHep interfaces of SARAH, to pass the precise information about the effective vertices from the spectrum generator to a Monte-Carlo tool. Finally, as an example to demonstrate the power of the entire setup, we present a new supersymmetric model that accommodates the diphoton excess, explicitly demonstrating how a large width can be obtained. We explicitly show several steps in detail to elucidate the use of these public tools in the precision study of this model.

Precision tools and models to narrow in on the 750 GeV diphoton resonance

Energy Technology Data Exchange (ETDEWEB)

Staub, Florian [CERN, Geneva (Switzerland). Theoretical Physics Dept.; Athron, Peter [Monash Univ., Melbourne (Australia). ARC Center of Excellence for Particle Physics at the Terascale; Basso, Lorenzo [Aix-Marseille Univ., CNRS-IN2P3, UMR 7346 (France). CPPM; and others

2016-02-15

The hints for a new resonance at 750 GeV from ATLAS and CMS have triggered a significant amount of attention. Since the simplest extensions of the standard model cannot accommodate the observation, many alternatives have been considered to explain the excess. Here we focus on several proposed renormalisable weakly-coupled models and revisit results given in the literature. We point out that physically important subtleties are often missed or neglected. To facilitate the study of the excess we have created a collection of 40 model files, selected from recent literature, for the Mathematica package SARAH. With SARAH one can generate files to perform numerical studies using the tailor-made spectrum generators FlexibleSUSY and SPheno. These have been extended to automatically include crucial higher order corrections to the diphoton and digluon decay rates for both CP-even and CP-odd scalars. Additionally, we have extended the UFO and CalcHep interfaces of SARAH, to pass the precise information about the effective vertices from the spectrum generator to a Monte-Carlo tool. Finally, as an example to demonstrate the power of the entire setup, we present a new supersymmetric model that accommodates the diphoton excess, explicitly demonstrating how a large width can be obtained. We explicitly show several steps in detail to elucidate the use of these public tools in the precision study of this model.

Precision tools and models to narrow in on the 750 GeV diphoton resonance

International Nuclear Information System (INIS)

Staub, Florian; Athron, Peter; Basso, Lorenzo; Goodsell, Mark D.; Harries, Dylan; Krauss, Manuel E.; Nickel, Kilian; Opferkuch, Toby; Ubaldi, Lorenzo; Vicente, Avelino; Voigt, Alexander

2016-01-01

The hints for a new resonance at 750 GeV from ATLAS and CMS have triggered a significant amount of attention. Since the simplest extensions of the standard model cannot accommodate the observation, many alternatives have been considered to explain the excess. Here we focus on several proposed renormalisable weakly-coupled models and revisit results given in the literature. We point out that physically important subtleties are often missed or neglected. To facilitate the study of the excess we have created a collection of 40 model files, selected from recent literature, for the Mathematica package SARAH. With SARAH one can generate files to perform numerical studies using the tailor-made spectrum generators FlexibleSUSY and SPheno. These have been extended to automatically include crucial higher order corrections to the diphoton and digluon decay rates for both CP-even and CP-odd scalars. Additionally, we have extended the UFO and CalcHep interfaces of SARAH, to pass the precise information about the effective vertices from the spectrum generator to a Monte-Carlo tool. Finally, as an example to demonstrate the power of the entire setup, we present a new supersymmetric model that accommodates the diphoton excess, explicitly demonstrating how a large width can be obtained. We explicitly show several steps in detail to elucidate the use of these public tools in the precision study of this model. (orig.)

Precision tools and models to narrow in on the 750 GeV diphoton resonance

Energy Technology Data Exchange (ETDEWEB)

Staub, Florian [CERN, Theoretical Physics Department, Geneva (Switzerland); Athron, Peter [Monash University, ARC Centre of Excellence for Particle Physics at the Terascale, School of Physics, Melbourne, VIC (Australia); Basso, Lorenzo [CPPM, Aix-Marseille Universite, CNRS-IN2P3, UMR 7346, Marseille Cedex 9 (France); Goodsell, Mark D. [Sorbonne Universites, LPTHE, UMR 7589, CNRS and Universite Pierre et Marie Curie, Paris Cedex 05 (France); Harries, Dylan [The University of Adelaide, Department of Physics, ARC Centre of Excellence for Particle Physics at the Terascale, Adelaide, SA (Australia); Krauss, Manuel E.; Nickel, Kilian; Opferkuch, Toby [Bethe Center for Theoretical Physics and Physikalisches Institut der Universitaet Bonn, Bonn (Germany); Ubaldi, Lorenzo [Tel-Aviv University, Raymond and Beverly Sackler School of Physics and Astronomy, Tel Aviv (Israel); Vicente, Avelino [Instituto de Fisica Corpuscular (CSIC-Universitat de Valencia), Valencia (Spain); Voigt, Alexander [Deutsches Elektronen-Synchrotron DESY, Hamburg (Germany)

2016-09-15

The hints for a new resonance at 750 GeV from ATLAS and CMS have triggered a significant amount of attention. Since the simplest extensions of the standard model cannot accommodate the observation, many alternatives have been considered to explain the excess. Here we focus on several proposed renormalisable weakly-coupled models and revisit results given in the literature. We point out that physically important subtleties are often missed or neglected. To facilitate the study of the excess we have created a collection of 40 model files, selected from recent literature, for the Mathematica package SARAH. With SARAH one can generate files to perform numerical studies using the tailor-made spectrum generators FlexibleSUSY and SPheno. These have been extended to automatically include crucial higher order corrections to the diphoton and digluon decay rates for both CP-even and CP-odd scalars. Additionally, we have extended the UFO and CalcHep interfaces of SARAH, to pass the precise information about the effective vertices from the spectrum generator to a Monte-Carlo tool. Finally, as an example to demonstrate the power of the entire setup, we present a new supersymmetric model that accommodates the diphoton excess, explicitly demonstrating how a large width can be obtained. We explicitly show several steps in detail to elucidate the use of these public tools in the precision study of this model. (orig.)

Control over the morphology of AlN during molecular beam epitaxy with the plasma activation of nitrogen on Si (111) substrates

International Nuclear Information System (INIS)

Mizerov, A. M.; Kladko, P. N.; Nikitina, E. V.; Egorov, A. Yu.

2015-01-01

The results of studies of the growth kinetics of AlN layers during molecular beam epitaxy with the plasma activation of nitrogen using Si (111) substrates are presented. The possibility of the growth of individual AlN/Si (111) nanocolumns using growth conditions with enrichment of the surface with metal near the formation mode of Al drops, at a substrate temperature close to maximal, during molecular beam epitaxy with the plasma activation of nitrogen (T s ≈ 850°C) is shown. The possibility of growing smooth AlN layers on a nanocolumnar AlN/Si (111) buffer with the use of T s ≈ 750°C and growth conditions providing enrichment with metal is shown

Control over the morphology of AlN during molecular beam epitaxy with the plasma activation of nitrogen on Si (111) substrates

Energy Technology Data Exchange (ETDEWEB)

Mizerov, A. M., E-mail: mizerov@beam.ioffe.ru; Kladko, P. N.; Nikitina, E. V.; Egorov, A. Yu. [Russian Academy of Sciences, St. Petersburg Academic University-Nanotechnology Research and Education Centre (Russian Federation)

2015-02-15

The results of studies of the growth kinetics of AlN layers during molecular beam epitaxy with the plasma activation of nitrogen using Si (111) substrates are presented. The possibility of the growth of individual AlN/Si (111) nanocolumns using growth conditions with enrichment of the surface with metal near the formation mode of Al drops, at a substrate temperature close to maximal, during molecular beam epitaxy with the plasma activation of nitrogen (T{sub s} ≈ 850°C) is shown. The possibility of growing smooth AlN layers on a nanocolumnar AlN/Si (111) buffer with the use of T{sub s} ≈ 750°C and growth conditions providing enrichment with metal is shown.

Percepción de la biotecnología en estudiantes universitarios de Costa Rica

Directory of Open Access Journals (Sweden)

Marta Valdez

2004-09-01

Full Text Available Se llevó a cabo una encuesta para estudiar la percepción y el grado de conocimiento sobre biotecnología y organismos modificados genéticamente (OMGs, en una muestra de estudiantes (n=750 de tres universidades públicas de Costa Rica: Universidad de Costa Rica (UCR, Universidad Nacional (UNA e Instituto Tecnológico de Costa Rica (ITCR. Se encontró que un 88% mostraron un conocimiento satisfactorio de la biotecnología moderna, y que un 79% expresaron una posición favorable y una buena aceptación de esa tecnología. Además, los estudiantes encuestados aceptarían ciertos riesgos asociados a la biotecnología, siempre y cuando, ésta mejore la capacidad competitiva de Costa Rica. El área de estudio de los estudiantes entrevistados parece estar relacionada con el grado de aceptación debido a que los estudiantes de disciplinas sociales mostraron una mayor percepción negativa hacia los productos biotecnológicos y OMGs, si se compara con la percepción expresada por los estudiantes encuestados de disciplinas de ciencias naturales y de áreas tecnológicas.Perception about biotechnology in university students in Costa Rica. A survey was carried out to determine the perception and knowledge about biotechnology and genetically modified organisms (GMOs in a sample (n = 750 of university students from three public universities in Costa Rica: Universidad de Costa Rica, Universidad Nacional and Instituto Tecnológico de Costa Rica. The study revealed that 88% of the students showed a satisfactory level of knowledge about modern biotechnology and 79% of them reported a favorable opinion and good acceptance of this technology. Students would accept some risks associated to biotechnology if it represents an improvement to the competitiveness of Costa Rica. Some differences were detected in the opinions from students of the three universities that can be associated to the area of study. Students from social disciplines showed a higher percentage of

N18, powder metallurgy superalloy for disks: Development and applications

Energy Technology Data Exchange (ETDEWEB)

Guedou, J.Y.; Lautridou, J.C.; Honnorat, Y. (SNECMA, Evry (France). Materials and Processes Dept.)

1993-08-01

The preliminary industrial development of a powder metallurgy (PM) superalloy, designated N18, for disk applications has been completed. This alloy exhibits good overall mechanical properties after appropriate processing of the material. These properties have been measured on both isothermally forged and extruded billets, as well as on specimens cut from actual parts. The temperature capability of the alloy is about 700 C for long-term applications and approximately 750 C for short-term use because of microstructural instability. Further improvements in creep and crack propagation properties, without significant reduction in tensile strength, are possible through appropriate thermomechanical processing, which results in a large controlled grain size. Spin pit tests on subscale disks have confirmed that the N18 alloy has a higher resistance than PM Astrology and is therefore an excellent alloy for modern turbine disk applications.

NEXRAD Rainfall Data: Eureka, California

Data.gov (United States)

National Aeronautics and Space Administration — Next-Generation Radar (NEXRAD) Weather Surveillance Radar 1988 (WSR-88D) measurements were used to support AMSR-E rainfall validation efforts in Eureka, California,...

Low-intensity blue-enriched white light (750 lux) and standard bright light (10,000 lux) are equally effective in treating SAD. A randomized controlled study.

Science.gov (United States)

Meesters, Ybe; Dekker, Vera; Schlangen, Luc J M; Bos, Elske H; Ruiter, Martine J

2011-01-28

Photoreceptor cells containing melanopsin play a role in the phase-shifting effects of short-wavelength light. In a previous study, we compared the standard light treatment (SLT) of SAD with treatment using short-wavelength blue-enriched white light (BLT). Both treatments used the same illuminance (10,000 lux) and were equally highly effective. It is still possible, however, that neither the newly-discovered photoreceptor cells, nor the biological clock play a major role in the therapeutic effects of light on SAD. Alternatively, these effects may at least be partly mediated by these receptor cells, which may have become saturated as a result of the high illuminances used in the therapy. This randomized controlled study compares the effects of low-intensity BLT to those of high-intensity SLT. In a 22-day design, 22 patients suffering from a major depression with a seasonal pattern (SAD) were given light treatment (10,000 lux) for two weeks on workdays. Subjects were randomly assigned to either of the two conditions, with gender and age evenly distributed over the groups. Light treatment either consisted of 30 minutes SLT (5000 °K) with the EnergyLight® (Philips, Consumer Lifestyle) with a vertical illuminance of 10,000 lux at eye position or BLT (17,000 °K) with a vertical illuminance of 750 lux using a prototype of the EnergyLight® which emitted a higher proportion of short-wavelengths. All participants completed questionnaires concerning mood, activation and sleep quality on a daily basis. Mood and energy levels were also assessed on a weekly basis by means of the SIGH-SAD and other assessment tools. On day 22, SIGH-SAD ratings were significantly lower than on day 1 (SLT 65.2% and BLT 76.4%). On the basis of all assessments no statistically significant differences were found between the two conditions. With sample size being small, conclusions can only be preliminary. Both treatment conditions were found to be highly effective. The therapeutic effects of low

Low-intensity blue-enriched white light (750 lux and standard bright light (10 000 lux are equally effective in treating SAD. A randomized controlled study

Directory of Open Access Journals (Sweden)

Bos Elske H

2011-01-01

Full Text Available Abstract Background Photoreceptor cells containing melanopsin play a role in the phase-shifting effects of short-wavelength light. In a previous study, we compared the standard light treatment (SLT of SAD with treatment using short-wavelength blue-enriched white light (BLT. Both treatments used the same illuminance (10 000 lux and were equally highly effective. It is still possible, however, that neither the newly-discovered photoreceptor cells, nor the biological clock play a major role in the therapeutic effects of light on SAD. Alternatively, these effects may at least be partly mediated by these receptor cells, which may have become saturated as a result of the high illuminances used in the therapy. This randomized controlled study compares the effects of low-intensity BLT to those of high-intensity SLT. Method In a 22-day design, 22 patients suffering from a major depression with a seasonal pattern (SAD were given light treatment (10 000 lux for two weeks on workdays. Subjects were randomly assigned to either of the two conditions, with gender and age evenly distributed over the groups. Light treatment either consisted of 30 minutes SLT (5000°K with the EnergyLight® (Philips, Consumer Lifestyle with a vertical illuminance of 10 000 lux at eye position or BLT (17 000°K with a vertical illuminance of 750 lux using a prototype of the EnergyLight® which emitted a higher proportion of short-wavelengths. All participants completed questionnaires concerning mood, activation and sleep quality on a daily basis. Mood and energy levels were also assessed on a weekly basis by means of the SIGH-SAD and other assessment tools. Results On day 22, SIGH-SAD ratings were significantly lower than on day 1 (SLT 65.2% and BLT 76.4%. On the basis of all assessments no statistically significant differences were found between the two conditions. Conclusion With sample size being small, conclusions can only be preliminary. Both treatment conditions were found

Changes in the design, fabrication and setting of guide tube support pins in alloy X750

International Nuclear Information System (INIS)

Benhamou, C.; Chambrin, J.L.; Todeschini, P.; Champredonde, J.; Lemaire, E.

2004-01-01

As a consequence of a problem of stress corrosion cracking (SCC) encountered on guide tube support pins (GTSP) of first generation (1982) and of second generation (1987), EDF and Framatome decided in mars 1988 to launch an important program involving a complete overhaul of the design, the material used, the fabrication and the setting in reactor of GTSP. This program has led to the implementation in 900 MWe and 1300 MWe PWR of a new tube guide support pin called NG89. This implementation began in 1989, now 15 years later, 40% of the operating GTSP in 900 MWe and 1300 MWe PWR are of NG89 type, the oldest ones cumulate 105000 hours in service without negative feedback experience. The main features of the NG89 is: - to be made from an alloy X-750 containing boron (from 25 to 45 ppm) - to have a SCC threshold set at 720 MPa - to be machined from metal bars completely treated, - to have a rolling of the fillets, and - to undergo a shot blasting on the zones of the surface the most acted upon. (A.C.)

A pulsed plasma jet with the various Ar/N2 mixtures

Science.gov (United States)

Barkhordari, A.; Ganjovi, A.; Mirzaei, I.; Falahat, A.; Rostami Ravari, M. N.

2017-12-01

In this paper, using the Optical Emission Spectroscopy technique, the physical properties of a fabricated pulsed DBD plasma jet are studied. Ar/N2 gaseous mixture is taken as operational gas, and Ar contribution in Ar/N2 mixture is varied from 75 to 95%. Through the optical emission spectra analysis of the pulsed DBD plasma jet, the rotational, vibrational and excitation temperatures and density of electrons in plasma medium of the pulsed plasma jet are obtained. It is seen that, at the wavelength of 750.38 nm, the radiation intensity from the Ar 4p → 4 s transition increases at the higher Ar contributions in Ar/N2 mixture. It is found that, for 95% of Ar presence in the mixture, the emission intensities from argon and molecular nitrogen are higher, and the emission line intensities will increase nonlinearly. In addition, it is observed that the quenching of Ar* by N2 results in the higher intensities of N2 excited molecules. Moreover, at the higher percentages of Ar in Ar/N2 mixture, while all the plasma temperatures are increased, the plasma electron density is reduced.

High temperature corrosion behaviour of Ti-46.6Al-1.4Mn-2Mo in environments of low oxygen and high sulphur potentials at 750 and 900 C

International Nuclear Information System (INIS)

Du, H.L.; Datta, P.K.; Hwang, S.K.

1997-01-01

In this paper, the oxidation and sulphidation behaviour of a TiAl-based intermetallic, Ti-46.6Al-1.4Mn-2Mo (at%) with duplex and laminar microstructures, was investigated in environments of H 2 /H 2 S/H 2 O at 750 and 900 C. The corrosion kinetics of the intermetallic were determined by means of discontinuous gravimetry and the as-received and exposed samples were characterised using SEM, EDX and XRD. The weight gain/time data in the oxygen and sulphur containing environment used indicated parabolic kinetics with Kp∝10 -12 g 2 /cm 4 /s at 750 C and cubic kinetics at 900 C. The increase in exposure temperature did not significantly change the corrosion behaviour of the materials. The material showed the development of a multilayered scale consisting of an outermost TiO 2 layer beneath which an Al 2 O 3 layer existed: the formation of MnS and Al 2 S 3 was observed to occur between the oxide layers and substrate. This paper will discuss the significance of these results and consider the mechanisms responsible for degradation of this type of intermetallics in high sulphur and low oxygen environment with reference to their limit of temperature tolerance. (orig.)

Toxicidad in vitro de los herbicidas atrazina y paraquat sobre el crecimiento vegetativo y la esporulación de hongos saprobios del suelo

OpenAIRE

CHAN CUPUL, Wilberth; HEREDIA ABARCA, Gabriela; RODRÍGUEZ VÁZQUEZ, Refugio; ARIAS MOTA, Rosa María

2014-01-01

El objetivo de este estudio fue evaluar la toxicidad in vitro de los herbicidas atrazina y paraquat sobre el crecimiento vegetativo y la esporulación de hongos saprobios del suelo. Se realizaron bioensayos dosis-respuesta en trece especies con cuatro concentraciones de atrazina (468, 937, 1875 y 3750 mg/L) y paraquat (93, 187, 375 y 750 mg/L). Los hongos fueron inoculados con 2 μL de una suspensión de 1.0 x 10(6) esporas/mL en cajas de Petri con agar papa dextrosa (APD) adicionado con atrazin...

Oxidación selectiva de hidrocarburos aromáticos, en fase gaseosa, catalizada por fosfatos mixtos vanadilo-aluminio

OpenAIRE

Siles Sorribás, María Teresa

2014-01-01

El objetivo principal de la Tesis, ha sido la síntesis, por un método sol-gel, nuevos catalizadores de vanadio-aluminio-fósforo en los que se han modificado la relación molar Al/V (0.2¿2); la sal de vanadio de partida (VO3Cl y NH4VO3) y el tratamiento térmico (450¿750ºC). Asimismo, se han sintetizado, a modo de referencia, sistemas vanadio-fósforo. Con el fin de determinar la influencia que dichas variables tienen sobre su composición, propiedades texturales, estructurales, ácido-base y re...

The development of a combined b-mode, ARFI, and spectral Doppler ultrasound imaging system for investigating cardiovascular stiffness and hemodynamics

Science.gov (United States)

Doherty, Joshua R.; Dumont, Douglas M.; Trahey, Gregg E.

2011-03-01

The progression of atherosclerotic disease, caused by the formation of plaques within arteries, is a complex process believed to be a function of the localized mechanical properties and hemodynamic loading associated with the arterial wall. It is hypothesized that measurements of vascular stiffness and wall-shear rate (WSR) may provide important information regarding vascular remodeling, endothelial function, and the growth of soft-lipid filled plaques that could help a clinician better diagnose a patient's risk of clinical events such as stroke. To that end, the approach taken in this work was to combine conventional B-mode, Acoustic Radiation Force Impulse (ARFI), Shear Wave Elasticity Imaging (SWEI), and spectral Doppler techniques into a single imaging system capable of simultaneously measuring the tissue displacements and WSR throughout the cardiac cycle and over several heartbeats. Implemented on a conventional scanner, the carotid arteries of human subjects were scanned to demonstrate the initial in vivo feasibility of the method. Two non-invasive ultrasound based imaging methods, SAD-SWEI and SAD-Gated Imaging, were developed that measure ARF-induced on-axis tissue displacements, off-axis transverse wave velocities, and WSR throughout the cardiac cycle. Human carotid artery scans were performed in vivo on 5 healthy subjects. Statistical differences were observed in both on-axis proximal wall displacements and transverse wave velocities during diastole compared to systole.

Effect of water-sediment regulation and its impact on coastline and suspended sediment concentration in Yellow River Estuary

Directory of Open Access Journals (Sweden)

Hai-bo Yang

2017-10-01

Full Text Available Implementation of the water-sediment regulation (WSR scheme, mainly focused on solving the sedimentation problems of reservoirs and the lower reaches of the Yellow River, has inevitably influenced the sediment distribution and coastal morphology of the Yellow River Estuary. Using coastline delineation and suspended sediment concentration (SSC retrieval methods, this study investigated water and sediment changes, identified detailed inter-annual and intra-annual variations of the coastline and SSC in the normal period (NP: 1986–2001, before and after the flood season and WSR period (WSRP: 2002–2013, before and after WSR. The results indicate that (1 the sedimentation in the low reaches of the Yellow River turned into erosion from 2002 onward; (2 the inter-annual coastline changes could be divided into an accretion stage (1986–1996, a slow erosion stage (1996–2002, and a slow accretion stage (2002–2013; (3 an intra-annual coastline extension occurred in the river mouth in most years of the WSRP; and (4 the mean intra-annual accretion area was 0.789 km2 in the NP and 4.73 km2 in the WSRP, and the mean SSC increased from 238 mg/L to 293 mg/L in the NP and from 192 mg/L to 264 mg/L in the WSRP.

Reduction of the thermal conductivity of the thermoelectric material ScN by Nb alloying

DEFF Research Database (Denmark)

Tureson, Nina; Van Nong, Ngo; Fournier, Daniele

2017-01-01

) orientation. The crystal structure, morphology, thermal conductivity, and thermoelectric and electrical properties were investigated. The ScN reference film exhibited a Seebeck coefficient of −45 μV/K and a power factor of 6 × 10−4 W/m K2 at 750 K. Estimated from room temperature Hall measurements, all...... samples exhibit a high carrier density of the order of 1021 cm−3. Inclusion of heavy transition metals into ScN enables the reduction in thermal conductivity by an increase in phonon scattering. The Nb inserted ScN thin films exhibited a thermal conductivity lower than the value of the ScN reference (10.......5 W m−1 K−1) down to a minimum value of 2.2 Wm−1 K−1. Insertion of Nb into ScN thus resulted in a reduction in thermal conductivity by a factor of ∼5 due to the mass contrast in ScN, which increases the phonon scattering in the material....

Rapid NIR determination of alkyl esters in virgin olive oil; Determinación rápida de ésteres alquílicos en aceite de oliva virgen para detección temprana de defectos sensoriales

Energy Technology Data Exchange (ETDEWEB)

Cayuela, J.A.

2017-07-01

The regulation of The European Union for olive oil and olive pomace established the limit of 35 mg·kg-1 for fatty acids ethyl ester contents in extra virgin olive oils, from grinding seasons after 2016. In this work, predictive models have been established for measuring fatty acid ethyl and methyl esters and to measure the total fatty acid alkyl esters based on near infrared spectroscopy (NIRS), and used successfully for this purpose. The correlation coefficients from the external validation exercises carried out with these predictive models ranged from 0.84 to 0.91. Different classification tests using the same models for the thresholds 35 mg·kg-1 for fatty acid ethyl esters and 75 mg·kg-1 for fatty acid alkyl esters provided success percentages from 75.0% to 95.2%. [Spanish] La reglamentación de la Unión Europea para el aceite de oliva y el orujo de oliva ha establecido el límite de 35 mg·kg-1 al contenido de ésteres etílicos de ácidos grasos en los aceites de oliva virgen extra, para campañas de molienda posteriores a 2016. En este trabajo se han establecido modelos predictivos para medir los ésteres etílicos y metílicos de ácidos grasos y para la medida de los ésteres alquílicos de ácidos grasos totales basados en la espectroscopía de infrarrojo cercano (NIRS) y utilizados con éxito para este propósito. Los coeficientes de correlación de los ejercicios de validación externa realizados con estos modelos predictivos oscilaron entre 0,84 y 0,91. Diferentes pruebas de clasificación utilizando los mismos modelos con respecto a los umbrales de 35 mg·kg-1 para ésteres etílicos y 75 mg·kg-1 para ésteres alquílicos, proporcionaron porcentajes de éxito del 75,0% al 95,2%.

ANTHROPOMETRIC INDICES IN ASSOCIATION WITH CARDIOMETABOLIC RISK FACTORS: FINDINGS OF THE ISFAHAN HEALTHY HEART PROGRAM

Directory of Open Access Journals (Sweden)

Nizal Sarrafzadegan

2010-11-01

Full Text Available Abstract    BACKGROUND: Obesity is increasing worldwide, but the debate about the most valid index associated with its health hazards remains unresolved. This study aimed to compare four main anthropometric indices by gender, to determine the best index in predicting cardiometabolic risk factors and to find their cutoff values in the population studied.    METHODS: This study was a cross-sectional community-based study performed on a representative sample of 12,514 adults (aged ≥19 years selected via 2-stage random cluster sampling from 3 cities in Iran. Partial correlation and ROC curve analyzes were used to determine the best anthropometric indices and their cutoff values.    RESULTS: The study population comprised 6123 males and 6391 females. In both genders, waist circumference (WC had the highest correlation with cardiometabolic risk factors (6 of 8 risk factors in men and 7 of 8 risk factors in women. ROC analyses showed that in males, the largest area under curve (AUC was obtained for waist-to-stature ration (WSR in most risk factors (6 of the 10 followed by body mass index (BMI and waist-to-height ratio (WHR with largest AUC (3 of the 10. The corresponding figure for females was obtained for WSR (9 of the 10 followed by BMI and WHR (1 of 10. Optimal cutoff values computed for combination of 3 major risk factors (including diabetes mellitus, hypertension and dyslipidemia revealed that in males and females, respectively, the cutoff values were 21.9 and 23.5 kg/m2 for BMI, 80.70 and 84.70 cm for WC, 0.85 and 0.86 for WHR and 0.47 and 0.53 for WSR.    CONCLUSION: WSR could be a valid anthropometric index for predicting cardiometabolic risk factors, and it has less variation than other indices among populations with ethnic differences in body size and fat distribution.      Keywords: Anthropometry, Cardiovascular Risk Factors, Iran, Obesity.

Hot corrosion of Co-Cr, Co-Cr-Al, and Ni-Cr alloys in the temperature range of 700-750 deg C

Science.gov (United States)

Chiang, K. T.; Meier, G. H.

1980-01-01

The effect of SO3 pressure in the gas phase on the Na2SO4 induced hot corrosion of Co-Cr, Ni-Cr, and Co-Cr-Al alloys was studied in the temperature range 700 to 750 C. The degradation of the Co-Cr and Ni-Cr alloys was found to be associated with the formation of liquid mixed sulfates (CoSO4-Na2SO4 or NiSO4-Na2SO4) which provided a selective dissolution of the Co or Ni and a subsequent sulfidation oxidation mode of attack which prevented the maintenance of a protective Cr2O3 film. A clear mechanism was not developed for the degradation of Co-Cr-Al alloys. A pitting corrosion morphology was induced by a number of different mechanisms.

Influence of temperature on oxidation mechanisms of fiber-textured AlTiTaN coatings.

Science.gov (United States)

Khetan, Vishal; Valle, Nathalie; Duday, David; Michotte, Claude; Delplancke-Ogletree, Marie-Paule; Choquet, Patrick

2014-03-26

The oxidation kinetics of AlTiTaN hard coatings deposited at 265 °C by DC magnetron sputtering were investigated between 700 and 950 °C for various durations. By combining dynamic secondary ion mass spectrometry (D-SIMS), X-ray diffraction (XRD), and transmission electron microscopy (TEM) investigations of the different oxidized coatings, we were able to highlight the oxidation mechanisms involved. The TEM cross-section observations combined with XRD analysis show that a single amorphous oxide layer comprising Ti, Al, and Ta formed at 700 °C. Above 750 °C, the oxide scale transforms into a bilayer oxide comprising an Al-rich upper oxide layer and a Ti/Ta-rich oxide layer at the interface with the coated nitride layer. From the D-SIMS analysis, it could be proposed that the oxidation mechanism was governed primarily by inward diffusion of O for temperatures of ≤700 °C, while at ≥750 °C, it is controlled by outward diffusion of Al and inward diffusion of O. Via a combination of structural and chemical analysis, it is possible to propose that crystallization of rutile lattice favors the outward diffusion of Al within the AlTiTa mixed oxide layer with an increase in the temperature of oxidation. The difference in the mechanisms of oxidation at 700 and 900 °C also influences the oxidation kinetics with respect to oxidation time. Formation of a protective alumina layer decreases the rate of oxidation at 900 °C for long durations of oxidation compared to 700 °C. Along with the oxidation behavior, the enhanced thermal stability of AlTiTaN compared to that of the TiAlN coating is illustrated.

Isothermal cross-sections of Hf-Sc-Ga(800 deg C) and Hf-Ti-Ga (750 deg C) phase diagrams

International Nuclear Information System (INIS)

Markiv, V.Ya.; Belyavina, N.N.

1981-01-01

Isothermal cross sections of Hf-Sc-Ga (800 deg C) and Hf-Ti-Ga (750 deg C) state diagrams are plotted. The existence of two ternary Hfsub(0.1-0.8)Scsub(0.9)-sub(0.2)Ga and Hfsub(0.8)Scsub(0.2)Gasub(3) phases is stated in the Hf-Sc-Ga system. The crystal structure of these compounds investigated by the powder method belongs to the structural α-MoB and ZrAl 3 types respectively. Continuous rows of (Hf, Sc 5 Ga 5 , (Hf, Ti)Ga 3 and (Hf, Ti)Ga 2 solid solutions are formed in the investigated systems. Essential quantity of the third component dissolve binary Sc 5 Ga 4 , Sc 2 Ga 3 (15 and 30 at % Hf respectively), Hf 5 Ga 4 , HfGa 2 (20, 10 at. % Sc), Hf 5 Ga 4 , HfGa, Hf 5 Ga 3 , Hf 2 Ga 3 (48, 30, 46, 20 at. % Ti) gallides [ru

Deuteron photodisintegration between 250 and 750 MeV

International Nuclear Information System (INIS)

Chen Huazhong; Zhang Xizhen; Han Wenshu; Chen Baoqiu; Jin Xingnan

1995-01-01

γD-PN process was studied in a full relativistic framework. A dynamical isobar propagator, which fits the P 33 phase shift of πN scattering, was adopted to improve the agreement between the theoretical and experimental data

Inconel 718 süper alaşımının farklı gerilme ve sıcaklıklarda yüksek sıcaklık sürünme davranışının incelenmesi

Directory of Open Access Journals (Sweden)

Ergün Subaşı

2016-04-01

Full Text Available Bu çalışmada, havacılıkta yaygın olarak kullanılan Inconel 718 süper alaşımının sürünme davranışına sıcaklık ve gerilmenin etkileri incelenmiştir. Deneyler; 750°C, 800°C sıcaklıklarında ve 200-350MPa gerilme aralığında gerçekleştirilmiştir. Deneysel çalışma sonuçlarından, gerilme üssü (n, sürünme hızı (έ ve aktivasyon enerjisi (Q hesaplanmıştır. Hesaplanan sonuçlara göre; sürünme hızlarının artan gerilme ile arttığı, ayrıca sıcaklığın artmasıyla birlikte sürünme hızları çok daha fazla artmaktadır. Aynı şekilde, artan gerilme ile birlikte aktivasyon enerjisi artmaktadır. Deney sonuçlarından elde edilen gerilme üssü değerlerine göre; etkin deformasyon mekanizmasının dislokasyon sürünmesi olduğu tespit edilmiştir. Inconel 718 süper alaşımının kopma sürünme ömrünü tahmin etmek için, Larson Miller grafiği çizilmiştir. Bu grafikle, Inconel 718’in yüksek sıcaklık sürünme ömürleri hesaplanabilir.

Interpreting the 750 GeV diphoton excess by the singlet extension of the Manohar-Wise model

Science.gov (United States)

Cao, Junjie; Han, Chengcheng; Shang, Liangliang; Su, Wei; Yang, Jin Min; Zhang, Yang

2016-04-01

The evidence of a new scalar particle X from the 750 GeV diphoton excess, and the absence of any other signal of new physics at the LHC so far suggest the existence of new colored scalars, which may be moderately light and thus can induce sizable Xgg and Xγγ couplings without resorting to very strong interactions. Motivated by this speculation, we extend the Manohar-Wise model by adding one gauge singlet scalar field. The resulting theory then predicts one singlet dominated scalar ϕ as well as three kinds of color-octet scalars, which can mediate through loops the ϕgg and ϕγγ interactions. After fitting the model to the diphoton data at the LHC, we find that in reasonable parameter regions the excess can be explained at 1σ level by the process gg → ϕ → γγ, and the best points predict the central value of the excess rate with χmin2 = 2.32, which corresponds to a p-value of 0.68. We also consider the constraints from various LHC Run I signals, and we conclude that, although these constraints are powerful in excluding the parameter space of the model, the best points are still experimentally allowed.

Synthesis of poly[N-(2-hydroxypropyl)methacrylamide] conjugates of inhibitors of the ABC transporter that overcome multidrug resistance in doxorubicin-resistant P388 cells in vitro

Czech Academy of Sciences Publication Activity Database

Šubr, Vladimír; Sivák, Ladislav; Koziolová, Eva; Braunová, Alena; Pechar, Michal; Strohalm, Jiří; Kabešová, Martina; Říhová, Blanka; Ulbrich, Karel; Kovář, Marek

2014-01-01

Roč. 15, č. 8 (2014), s. 3030-3043 ISSN 1525-7797 R&D Projects: GA ČR GAP301/12/1254; GA MŠk(CZ) ED1.1.00/02.0109 Institutional support: RVO:61389013 ; RVO:61388971 Keywords : N-(2-hydroxypropyl)methacrylamide copolymers * multidrug resistance * P-glycoprotein inhibitors Subject RIV: CD - Macromolecular Chemistry; FD - Oncology ; Hematology (MBU-M) Impact factor: 5.750, year: 2014

TOR

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — A tornado warning is issued by the local NWS Weather Forecast Office (WFO) when a tornado is indicated by the WSR-88D radar or sighted by spotters.

77 FR 49991 - Small Business Size Standards; Adoption of 2012 North American Industry Classification System for...

Science.gov (United States)

2012-08-20

... Manufacturing. ......... 322215 Nonfolding Sanitary ......... 750 employees....... Food Container Manufacturing... Manufacturing. ......... 327113 Porcelain Electrical 500 employees. Supply Manufacturing. 327120 Clay Building N 2b 750 employees....... 327121 Brick and Structural 500 employees. Material and Clay Tile...

Modeling the terrestrial N processes in a small mountain catchment through INCA-N: A case study in Taiwan.

Science.gov (United States)

Lu, Meng-Chang; Chang, Chung-Te; Lin, Teng-Chiu; Wang, Lih-Jih; Wang, Chiao-Ping; Hsu, Ting-Chang; Huang, Jr-Chuan

2017-09-01

Riverine dissolved inorganic nitrogen (DIN) is an important indicator of trophic status of aquatic ecosystems. High riverine DIN export in Taiwan, ~3800kg-Nkm -2 yr -1 , which is ~18 times higher than the global average, urges the need of thorough understanding of N cycling processes. We applied INCA-N (Integrated Nitrogen Catchment Model) to simulate riverine DIN export and infer terrestrial N processes using weekly rainwater and streamwater samples collected at the Fushan Experimental Forest (FEF) of northern Taiwan. Results showed that the modeled discharge and nitrate export are in good agreement with observations, suggesting the validity of our application. Based on our modeling, the three main N removal processes, in the order of descending importance, were plant uptake, riverine N transport and denitrification at FEF. The high plant uptake rate, 4920kg-Nkm -2 yr -1 , should have led to accumulation of large biomass but biomass at FEF was relatively small compared to other tropical forests, likely due to periodic typhoon disruptions. The low nitrate concentration but high DIN export highlights the importance of hydrological control over DIN export, particularly during typhoons. The denitrification rate, 750kg-Nkm -2 yr -1 , at FEF was also low compared to other tropical forest ecosystems, likely resulting from quick water drainage through the coarse-loamy top soils. The high DIN export to atmospheric deposition ratio, 0.45, suggests that FEF may be in advanced stages of N excess. This simulation provides useful insights for establishing monitoring programs and improves our understanding N cycling in subtropical watersheds. Copyright © 2017 Elsevier B.V. All rights reserved.

Axial concentration profiles and N{sub 2}O flue gas in a pilot scale bubbling fluidised bed coal combustor

Energy Technology Data Exchange (ETDEWEB)

Tarelho, L.A.C.; Matos, M.A.A.; Pereira, F.J.M.A. [Environment and Planning Department, University of Aveiro, 3810-193 Aveiro (Portugal)

2005-05-15

Atmospheric Bubbling Fluidised Bed Coal Combustion (ABFBCC) of a bituminous coal and anthracite with particle diameters in the range 500-4000 {mu}m was investigated in a pilot-plant facility (circular section with 0.25 m internal diameter and 3 m height). The experiments were conducted at steady-state conditions using three excess air levels (10%, 25% and 50%) and bed temperatures in the 750-900 {sup o}C range. Combustion air was staged, with primary air accounting for 100%, 80% and 60% of total combustion air. For both types of coal, virtually no N{sub 2}O was found in significant amounts inside the bed. However, just above the bed-freeboard interface, the N{sub 2}O concentration increased monotonically along the freeboard and towards the exit flue. The N{sub 2}O concentrations in the reactor ranged between 0-90 ppm during bituminous coal combustion and 0-30 ppm for anthracite. For both coals, the lowest values occurred at the higher bed temperature (900 {sup o}C) with low excess air (10%) and high air staging (60% primary air), whereas the highest occurred at the lower bed temperature (750 {sup o}C for bituminous, 825 {sup o}C for anthracite) with high excess air (50%) and single stage combustion. Most of the observed results could be qualitatively interpreted in terms of a set of homogeneous and heterogeneous reactions, where catalytic surfaces (such as char, sand and coal ash) can play an important role in the formation and destruction of N{sub 2}O and its precursors (such as HCN, NH{sub 3} and HCNO) by free radicals (O, H, OH) and reducing species (H{sub 2}, CO, HCs)

Strain energy density-distance criterion for the initiation of stress corrosion cracking of alloy X-750

Energy Technology Data Exchange (ETDEWEB)

Hall, M.M. Jr.; Symons, D.M.

1996-05-01

A strain energy density-distance criterion was previously developed and used to correlate rising-load K{sub c} initiation data for notched and fatigue precracked specimens of hydrogen precharged Alloy X-750. This criterion, which was developed for hydrogen embrittlement (HE) cracking, is used here to correlate static-load stress corrosion cracking (SCC) initiation times obtained for smooth geometry, notched and fatigue precracked specimens. The onset of SCC crack growth is hypothesized to occur when a critical strain, which is due to environment-enhanced creep, is attained within the specimen interior. For notched and precracked specimens, initiation is shown by analysis to occur at a variable distance from notch and crack tips. The initiation site varies from very near the crack tip, for highly loaded sharp cracks, to a site that is one grain diameter from the notch, for lower loaded, blunt notches. The existence of hydrogen gradients, which are due to strain-induced hydrogen trapping in the strain fields of notch and crack tips, is argued to be controlling the site for initiation of cracking. By considering the sources of the hydrogen, these observations are shown to be consistent with those from the previous HE study, in which the characteristic distance for crack initiation was found to be one grain diameter from the notch tip, independent of notch radius, applied stress intensity factor and hydrogen level.

Aqua{2-(pyridin-2-yl-N-[(pyridin-2-ylmethylidene]ethanamine-κ3N,N′,N′′}(sulfato-κ2O,O′copper(II tetrahydrate

Directory of Open Access Journals (Sweden)

Daniel Tinguiano

2013-01-01

Full Text Available The title complex, [Cu(SO4(C13H13N3(H2O]·4H2O, was obtained by mixing copper sulfate pentahydrate and 2-(pyridin-2-yl-N-(pyridin-2-ylmethylideneethanamine in ethanol under reflux conditions. The CuII ion shows a Jahn–Teller-distorted octahedral geometry, with equatorial positions occupied by three N atoms from the tridentate ligand (average Cu—N = 2.004 Å and one O atom from a bidentate sulfate anion [Cu—O = 1.963 (2 Å]. The axial positions are occupied by one O atom from a coordinating water molecule [Cu—O = 2.230 (3 Å] and one weakly bonded O atom [Cu—O = 2.750 (2 Å] from the bidentate sulfate ion. The complex molecules are connected through O—H...O hydrogen bonds between the coordinating water molecules and sulfate ions from neighboring complexes, forming a double chain parallel to the c axis. The chains are stabilized through additional hydrogen bonds by one of the non-coordinating water molecules bridging between neighboring strands of the double chains. The remaining three water molecules fill the interstitial space between the double chains and are involved in an intricate hydrogen-bonding network that consolidates the structure.

Study of the antiproton-proton annihilations into six body final states at 750 MeV/c and channels with associated production of K K; Estudio de las aniquilaciones pp en seis cuerpos a 750 MeV/c de momento del haz y canales con produccion asociada de KK

Energy Technology Data Exchange (ETDEWEB)

Adeva, B; Duran, I

1980-07-01

In this work we present an analysis of the antiproton-proton annihilations into six body final states with strange particle production at 750 HeV/c. It is shown that these final states are dominated at this energy by resonance production in quasi-three body Intermediate states. We determine the scattering length of the resonance{delta}+ (970) which is found to be compatible with earlier determinations. fe also study the production of the resonance {omega}(783) associated to the system K{sup 0}K{sup 0} in the five body final state and determine Its polarization, which 1s not compatible with that obtained for the p{sup 0}(770) in the final state K{sup 0}K{sup 0} p{sup 0}. The amplitudes should be equal in a quark rearrangement model. (Author) 11 refs.

Estudios adicionales sobre los Crocodylia y Testudinata del Alto Caquetá y Río Caguán Estudios adicionales sobre los Crocodylia y Testudinata del Alto Caquetá y Río Caguán

Directory of Open Access Journals (Sweden)

Medem Federico

1969-06-01

Full Text Available Se llevaron a cabo estudios adicionales sobre problemas de reproducción de la babilla (Caiman sclerops y tres especies de tortugas (Podocnemis expansa, Podocnemis unifilis y Phrynops geoffroanus tuberosus.  Los resultados principales son los siguientes:  1 Caiman sclerops. Los huevos miden de 67.0 : 41.5 mm. a 73.5 : 41.0 mm.  La longitud total de los recién nacidos comprende de 239.5 mm. a 255.5 mm.; pesan entre 32 g, 250 mg. y 47 g.  2 Podocnemis expansa. No es nativa del Alto Caquetá, sino ha sido introducida de su curso bajo y del Putumayo en 1940, 1943 y 1955.  Actualmente está establecida y se reproduce. Los huevos miden de 44.5 : 36.5 mm, a 48.5 : 45.5 mm., y pesan de 34 g, 350 mg. a 44 g, 300 mg. La Iongitud del Carapax de los recién nacidos varía entre 39.5 mm. y 45.0 mm.; pesan de 17 g, 300 mg. a 20 g.  3 Podocnemis unifilis. Los huevos miden de 41.0 : 28.5 mm. a 51.0 33.5 mm., y pesan entre 15 g. y 31 g.; los recién nacidos de 34.0 a 48.0 mm., pesan de 8 g, 750 mg. a 21 g, 100 mg. Evidentemente, la luz constituye el factor más decisivo en relación con la orientación de la cría recién salida del nido, pero indudablemente existen también otros factores todavía desconocidos. Desarrollan una velocidad considerable para llegar al agua, así, por ejemplo, necesitan unos 25 minutos para recorrer una distancia de 96 metros; no permanecen en las aguas poco profundas cerca de la orilla, sino buscan en seguida las partes hondas donde encuentran mejor protección. En cambio, las babillas recién salidas si permanecen cerca de las orillas, ya que están protegidas por la hembra.  4 Phrynops geoffroanus tuberosus. Los huevos miden entre 32.5 31.5 mm, y 35.0 : 34.0 mm.; pesan de 13 g, 550 mg. a 22 g.; los recién nacidos entre 38.5 mm, y 48.0 mm., .y pesan de 7 g, 700 mg. a 14 g, 750 mg.  5 La Matamata (Chelus fimbriatus es, en realidad, nativa en el Alto Caquetá, y no ocasionalmente traída de otros ríos, como se

Pseudo-scalar Higgs boson production at N"3LO_A+N"3LL"'

International Nuclear Information System (INIS)

Ahmed, Taushif; Rana, Narayan; Ravindran, V.; Bonvini, Marco; Rottoli, Luca; Kumar, M.C.; Mathews, Prakash

2016-01-01

We consider the production of a pseudo-scalar particle A at the LHC, and present accurate theoretical predictions for its inclusive cross section in gluon fusion. The prediction is based on combining fixed-order perturbation theory and all-order threshold resummation. At fixed order we include the exact next-to-next-to-leading order (NNLO) plus an approximate next-to-next-to-next-to-leading order (N"3LO_A) which is based on the recent computation at this order for the scalar case. We then add threshold resummation at next-to-next-to-next-to leading logarithmic accuracy (N"3LL"'). Various forms of threshold resummation are considered, differing by the treatment of subleading terms, allowing a robust estimate of the theoretical uncertainties due to missing higher orders. With particular attention to pseudo-scalar masses of 200 and 750 GeV, we also observe that perturbative convergence is much improved when resummation is included. Additionally, results obtained with threshold resummation in direct QCD are compared with analogous results as computed in soft-collinear effective theory, which turn out to be in good agreement. We provide precise predictions for pseudo-scalar inclusive cross section at 13 TeV LHC for a wide range of masses. The results are available through updated versions of the public codes ggHiggs and TROLL. (orig.)

Report of drilling and radionuclide migration investigations at UE20n number-sign 1, Pahute Mesa, Nevada Test Site, 1987

International Nuclear Information System (INIS)

Erikson, S.J.

1991-04-01

Exploratory hole UE20n number-sign 1 was drilled 305 m down hydraulic gradient of the Cheshire event (U20n) as part of the Radionuclide Migration Program at the Nevada Test Site. The hole was designed to investigate the possibility of groundwater transport of radionuclides from the U20n cavity region. Drilling reached a total depth of 1005.8 m. Composite static water levels in the borehole were measured at approximately 620 m below ground surface. The borehole penetrated about 386 m of saturated zone, which was comprised primarily of rhyolite lava flows of the Upper Rhyolite Lavas, Tuffs, and Rhyolites of Area 20. Evidence from UE20n number-sign 1 suggests the presence of a relatively more permeable zone in the 730 to 750-m depth interval. The neutron log suggests that greater quantities of water were present at depths between 729 and 747 m. Core collected over three depth intervals showed the highest fracture density in a reddish-grey rhyolite lava flow in the 733.8 to 738.1-m core interval. Groundwater flow away from U20n through this permeable zone is suggested by the UE20n number-sign 1 borehole temperature logs. Elevated 3 H activities were observed with the highest activities found near 732 m. The 3 H activities observed in the 732 to 802-m interval in UE20n number-sign 1 were of similar magnitude to those found in the cavity region in the U20n post-shot hole. The activities of 125 Sb and 85 Kr, which are known to be mobile in groundwater, were of similar magnitude to those found near the cavity region, while 137 Cs, which is thought to be adsorbed during transport, was found in activities two to three orders of magnitude lower than near the cavity. These temperature and radioisotope data suggest that radionuclide migration via groundwater flow may be occurring laterally from the U20n rubble chimney through the permeable zone located at the 730 to 750-m depth. 25 refs., 18 figs., 15 tabs

Effects of various weaning times on growth performance, rumen fermentation and microbial population of yellow cattle calves

Directory of Open Access Journals (Sweden)

Huiling Mao

2017-11-01

Full Text Available Objective This study was conducted to investigate the effects of weaning times on the growth performance, rumen fermentation and microbial communities of yellow cattle calves. Methods Eighteen calves were assigned to a conventional management group that was normally weaned (NW, n = 3 or to early weaned (EW group where calves were weaned when the feed intake of solid feed (starter reached 500 g (EW500, n = 5, 750 g (EW750, n = 5, or 1,000 g (EW1,000, n = 5. Results Compared with NW, the EW treatments increased average daily gain (p0.05, but changes in bacterial composition were found. Conclusion From the present study, it is inferred that EW is beneficial for rumen fermentation, and weaning when the feed intake of the starter reached 750 g showed much better results.

La intervención del pediatra en el niño con labio y paladar hendido

Directory of Open Access Journals (Sweden)

Esther Lombardo-Aburto

2017-06-01

Full Text Available Las malformaciones congénitas son defectos estructurales presentes en el nacimiento. Las fisuras labio-alvéolo palatinas tienen una alta incidencia que se presenta en uno de cada 750 recién nacidos vivos, por lo que están entre las malformaciones más frecuentes y mejor conocidas. El labio y paladar hendido son anomalías que comúnmente están asociadas y constituyen las malformaciones congénitas más frecuentes de la cabeza y el cuello. Se define como labio leporino o hendido, fisura labial o queilosquisis al defecto facial que involucra el cierre incompleto del labio, unilateral, bilateral o medial, generalmente lateral a la línea media. Se define como paladar hendido, palatosquisis, o fisura palatina al defecto palatino en la línea media que comunica con fosas nasales y cavidad oral.

Bilayer tablets of Paliperidone for Extended release osmotic drug delivery

Science.gov (United States)

Chowdary, K. Sunil; Napoleon, A. A.

2017-11-01

The purpose of this study is to develop and optimize the formulation of paliperidone bilayer tablet core and coating which should meet in vitro performance of trilayered Innovator sample Invega. Optimization of core formulations prepared by different ratio of polyox grades and optimization of coating of (i) sub-coating build-up with hydroxy ethyl cellulose (HEC) and (ii).enteric coating build-up with cellulose acetate (CA). Some important influence factors such as different core tablet compositions and different coating solution ingredients involved in the formulation procedure were investigated. The optimization of formulation and process was conducted by comparing different in vitro release behaviours of Paliperidone. In vitro dissolution studies of Innovator sample (Invega) with formulations of different release rate which ever close release pattern during the whole 24 h test is finalized.

Industrial Application of Thin Films (TiAl)N Deposited on Thermo-Wells

International Nuclear Information System (INIS)

Velez, G.; Jaramillo, S.; Arango, Y. C.; Devia, D.; Quintero, J.; Devia, A.

2006-01-01

The thermo-well is formed by two layers, one layer is a ceramic and the other layer is anviloy (comprised tungsten). They are used to coat the thermocouple in the control temperature system during the Aluminum-Silicon alloy melting process. After two weeks of continuous work at 750 deg. C of temperature (the alloy temperature), a high wear in this material is observed, affecting the ceramic. (TiAl)N thin films are deposited directly on the anviloy substrates by the PAPVD (Plasma Assisted Physics Vapor Deposition) in arc pulsed technique, using a TiAl target in a mono-vaporizer system, composed by a reactor and a power controlled system. Two opposite electrodes are placed into the reactor and discharge is produced by a controlled power system. The XRD (X-ray diffraction) patterns show the presence of the (TiAl)N thin film peaks. The morphological characteristics are studied by the scanning probe microscopy (SPM)

A Comparison of Mindray BC-6800, Sysmex XN-2000, and Beckman Coulter LH750 Automated Hematology Analyzers: A Pediatric Study.

Science.gov (United States)

Ciepiela, Olga; Kotuła, Iwona; Kierat, Szymon; Sieczkowska, Sandra; Podsiadłowska, Anna; Jenczelewska, Anna; Księżarczyk, Karolina; Demkow, Urszula

2016-11-01

Modern automated laboratory hematology analyzers allow the measurement of over 30 different hematological parameters useful in the diagnostic and clinical interpretation of patient symptoms. They use different methods to measure the same parameters. Thus, a comparison of complete blood count made by Mindray BC-6800, Sysmex XN-2000 and Beckman Coulter LH750 was performed. A comparison of results obtained by automated analysis of 807 anticoagulated blood samples from children and 125 manual microscopic differentiations were performed. This comparative study included white blood cell count, red blood cell count, and erythrocyte indices, as well as platelet count. The present study showed a poor level of agreement between white blood cell enumeration and differentiation of the three automated hematology analyzers under comparison. A very good agreement was found when comparing manual blood smear and automated granulocytes, monocytes, and lymphocytes differentiation. Red blood cell evaluation showed better agreement than white blood cells between the studied analyzers. To conclude, studied instruments did not ensure satisfactory interchangeability and did not facilitate a substitution of one analyzer by another. © 2016 Wiley Periodicals, Inc.

Multilayer Ti-Cr-N Coatings Produced by the Vacuum-Arc Deposition

International Nuclear Information System (INIS)

Kunchenko, Yu.V.; Kunchenko, V.V.; Neklyudov, I.M.; Kartmazov, G.N.; Andreev, A.A.

2007-01-01

A possibility is demonstrated for nanolayer TiN x /CrN x coating formation by the method of vacuum-arc deposition on the substrate, which being rotated around the 'Bulat'-type chamber axis intercepts sequentially the plasma flows generated by three evaporators. The model for calculating the coating deposition rate (thickness) was used to determine the geometrical parameters that provide the formation of layer structures in the nanometer range. The variations of phase-structure characteristics, compression microstresses (σ) microhardness (H v ) of the coating formed have been investigated as functions of nitrogen pressure (P N =0.001...1.0 Pa), bias voltage (U=-100...-300 V) and condensation temperature (T C =330...750 degree C) at focusing magnetic field strength H F =0; 35 and 100 Oe. The mentioned field strengths were responsible for the ion current densities (j∼5,8...10 and ≥15 mA/cm 2 ). A nonmonotonic behaviour of H v as a function of condensation temperature and of vacuum annealing temperature has been established. The maximum H v values (∼35...37 GPa) were observed in the 450...500 degree C range

Highly c-axis oriented growth of GaN film on sapphire (0001 by laser molecular beam epitaxy using HVPE grown GaN bulk target

Directory of Open Access Journals (Sweden)

S. S. Kushvaha

2013-09-01

Full Text Available Growth temperature dependant surface morphology and crystalline properties of the epitaxial GaN layers grown on pre-nitridated sapphire (0001 substrates by laser molecular beam epitaxy (LMBE were investigated in the range of 500–750 °C. The grown GaN films were characterized using high resolution x-ray diffraction, atomic force microscopy (AFM, micro-Raman spectroscopy, and secondary ion mass spectroscopy (SIMS. The x-ray rocking curve full width at a half maximum (FWHM value for (0002 reflection dramatically decreased from 1582 arc sec to 153 arc sec when the growth temperature was increased from 500 °C to 600 °C and the value further decreased with increase of growth temperature up to 720 °C. A highly c-axis oriented GaN epitaxial film was obtained at 720 °C with a (0002 plane rocking curve FWHM value as low as 102 arc sec. From AFM studies, it is observed that the GaN grain size also increased with increasing growth temperature and flat, large lateral grains of size 200-300 nm was obtained for the film grown at 720 °C. The micro-Raman spectroscopy studies also exhibited the high-quality wurtzite nature of GaN film grown on sapphire at 720 °C. The SIMS measurements revealed a non-traceable amount of background oxygen impurity in the grown GaN films. The results show that the growth temperature strongly influences the surface morphology and crystalline quality of the epitaxial GaN films on sapphire grown by LMBE.

77 FR 72439 - Residential, Business, and Wind and Solar Resource Leases on Indian Land

Science.gov (United States)

2012-12-05

... to streamline and expedite the leasing process, advance economic development, and spur renewable... entities; however, many tribes requested clarification regarding other taxation arising in the context of... residential, business, and WSR leasing subparts to subpart A. This section now addresses not only taxation of...

Weighted Sum-Rate Maximization Using Weighted MMSE for MIMO-BC Beamforming Design

DEFF Research Database (Denmark)

Christensen, Søren; De Carvalho, Elisabeth; Agarwal, Rajiv

2009-01-01

This paper studies linear transmit filter design for weighted sum-rate (WSR) maximization in the multiple input multiple output broadcast channel (MIMO-BC). The problem of finding the optimal transmit filter is non-convex and intractable to solve using low complexity methods. Motivated by recent ...

Study of the antiproton-proton annihilations into six body final states at 750 MeV/c and channels with associated production of K K

International Nuclear Information System (INIS)

Adeva, B.; Duran, I.

1980-01-01

In this work we present an analysis of the antiproton-proton annihilations into six body final states with strange particle production at 750 HeV/c. It is shown that these final states are dominated at this energy by resonance production in quasi-three body Intermediate states. We determine the scattering length of the resonanceδ+ (970) which is found to be compatible with earlier determinations. fe also study the production of the resonance ω(783) associated to the system K 0 K 0 in the five body final state and determine Its polarization, which 1s not compatible with that obtained for the p 0 (770) in the final state K 0 K 0 p 0 . The amplitudes should be equal in a quark rearrangement model. (Author) 11 refs

Caracterización de la Fábrica de Ladrillo del Palacio del Infante Don Luis, Boadilla del Monte, Madrid

Directory of Open Access Journals (Sweden)

Fort, R.

2004-04-01

Full Text Available Brickwork from the Palacio del Infante Don Luis Antonio de Borbón (Boadilla del Monte, Madrid, 18th century has been characterised, as well as the conservation degree of the materials has been determined. The original brick is of low quality and its mineralogical paragenesis shows firing temperatures of 750-850º C. Its high water absorption capacity and porosity are responsible for its characteristic alteration and disgregation. Restoration brick is of better quality, fired at higher temperatures (~900º C. In relation to the original mortar, it is a lime one, with a relation close to 1:2; aggregates are plurimineral and an average grain size of 1,50 mm. Mortars from following restorations are different from the original ones, not in composition, practically the same with the exception of the most modern mortar which is cementbased, but in their dosification and in the aggregates grain size, as well as in the finishing of the joint. Repointing of the original brickwork, together with the presence of water (dampness, and the low quality of brick due to an insuficient and heterogeneous firing, are resposible of the deterioration the brick undergoes.

Se ha caracterizado la fábrica de ladrillo existente en el Palacio del Infante Don Luis Antonio de Borbón (Boadilla del Monte, Madrid, siglo XVIII, y se ha definido el estado de conservación de los materiales. El ladrillo original es de baja calidad y su paragénesis mineral indica una temperatura de cocción de 750-850ºC. Su elevada capacidad de absorción de agua y alta porosidad, son responsables de su alteración y disgregación. El ladrillo de restauración es de mejor calidad, cocido a mayor temperatura (~900ºC. En cuanto al mortero original, es un mortero de cal de relación cercana a 1:2; los áridos son pluriminerales y tamaño medio de 1,50 mm. Los morteros de las sucesivas restauraciones se diferencian del original, no en la composición, que es prácticamente la misma a

Factores de riesgo de hospitalización por gripe (H1N1 2009 y efectividad de intervenciones farmacológicas y no farmacológicas en su prevención. Estudio de casos y controles

Directory of Open Access Journals (Sweden)

Angela Domínguez

2011-01-01

Full Text Available Entre las medidas farmacológicas de posible utilidad para limitar el impacto de las pandemias gripales en la comunidad están los fármacos antivirales (inhibidores de la neuraminidasa y las vacunas antigripales y antineumocócicas, ya que la gripe predispone a la neumonía bacteriana por StrVptoUoUUus pnVumonWTV. Entre las medidas no farmacológicas destacan la higiene de manos y la higiene respiratoria. La falta de conocimiento de la efectividad de dichas medidas en situación de pandemia justifica que en septiembre de 2009, ante la solicitud de proyectos de investigación por parte del Ministerio de Ciencia e Innovación en su Programa de Investigación sobre la gripe (H1N1 2009 en España, el CIBER de Epidemiología y Salud Pública presentara un proyecto multicéntrico de casos y controles emparejados por edad, hospital y fecha de hospitalización para investigar sobre estos aspectos en 37 hospitales de 7 comunidades autónomas. Por cada caso hospitalizado confirmado de gripe pandémica se seleccionaba 1 caso confirmado ambulatorio y 3 controles (2 hospitalarios y 1 ambulatorio. En los casos y en los controles se recogían variables demográficas, condiciones médicas subyacentes, utilización de antivirales, vacunas recibidas y hábitos de higiene. En los casos hospitalizados se recogieron, además, información relativa al tratamiento antiviral y evolución de la enfermedad. Hasta octubre 2010 se habían reclutado un total de 3.750 pacientes y se está realizando la depuración de los datos y la recuperación de variables. La implicación de las Direcciones Generales de Salud Pública ha sido fundamental para la adecuación del proyecto a la evolución de la pandemia.

Evaluación nutricional en niños de 0 a 24 meses con labio leporino y paladar hendido

OpenAIRE

Carballo, Estefanía

2013-01-01

La Fisura Labiopalatina es el defecto congénito más frecuente que afecta a las estructuras maxilofaciales del hombre y ocupa el cuarto lugar entre los problemas de salud en Estomatología. Son anomalías congénitas, que ocurren cuando los tejidos del labio y/o del paladar del feto no crecen a la par y no se fusionan correctamente durante las primeras etapas del embarazo. Estadísticamente es uno de los defectos congénitos más comunes. Afecta a uno de cada 700-750 recién nacidos, y son más comune...

ESTANDARIZACIÓN DE LA EXTRACCIÓN DE ADN Y VALIDACIÓN DE LA PCR MÚLTIPLE PARA DETECTAR Listeria monocytogenes EN QUESO, LECHE, CARNE DE RES Y POLLO

Directory of Open Access Journals (Sweden)

M. Mercado

2005-12-01

Full Text Available Este trabajo validó la técnica de PCR para la detección de L. monocytogenes a partir de ADN de cultivos puros y en muestras de leches crudas, quesos frescos, carne de res y carne de pollo. En DNA de cultivos puros la sensibilidad, la especificidad y la reproducibilidad encontrada fue de 100%, 101UFC/ml y K=1,respectivamente. Para la extracción del ADN de los alimentos se emplearon dos métodos, el primero, basado en la precipitación alcohólica en presencia de NaI, lo que redujo en gran medida las grasas; permitiendo la detección directa de 10 1 UFC/ml en leche cruda y 105 UFC/g en queso fresco. El segundo método, basado en la extracción con lisozima, proteinasa K y fenol-cloroformo, permitió establecer límites de detección de 102 y 104 UFC/g para las carnes de res y pollo respectivamente. La PCR se basó enla especificidad de los iniciadores LI1/U1 que amplificaron una banda de 938 pb (identificación de género característica del rDNA 16S y los iniciadores LF/LR que amplificaron una banda de 750 pbcaracterística del gen hlyA (identificación de especie. Los resultados de la validación reportaron con relación al método “Gold Standard” una reproducibilidad, sensibilidad y especificidad del 100% en leches crudas. Para las muestras de queso frescos se reportó una reproducibilidad de 97%, sensibilidad 96.3% y especificidad del 100%, para la carne de pollo la reproducibilidad fue 98.43%, sensibilidad96.9%, especificidad 100%, valor predictivo positivo 100% y valor predictivo negativo 100%, para la carne de res todos los parámetros fueron 100%. El método “Gold Standard” reportó 100% para todos losparámetros. El trabajo muestra que ambas técnicas pueden ser utilizadas para detectar L. monocytogenes en este tipo de alimentos y que la PCR reduce el tiempo de ensayo considerablemente.

The performance of obesity screening tools among young Thai adults.

Science.gov (United States)

Limpawattana, Panita; Kengkijkosol, Thepkhachi; Assantachai, Prasert; Krairit, Orapitchaya; Pimporm, Jiraporn

2014-12-01

Obesity is a worldwide medical condition that leads to physical and psychological impairment. Specific ethnicity, gender and age group are related to different performances of anthropometric indices to predict obesity. The objectives of this study were to estimate the performance of the anthropometric indices for detecting obesity based on percentage of body fat (PBF), to study the correlation among those indices, and to determine the optimal cut-off point of the indices among young Thai adults. This is a cross-sectional study of healthy urban subjects in Khon Kaen, Thailand who were aged 20-39 years. Baseline characteristics and anthropometric measures were collected. PBF was determined using bioelectrical impedance analysis. Demographic data and anthropometric variables were analyzed using descriptive statistics. Receiver-operating characteristic (ROC) curves were used to compare the performance of anthropometric measures as predictors of obesity. One-hundred men and 100 women were recruited for this study. Body mass index (BMI), waist circumference (WC), waist-to-hip ratio (WHR) and waist-to-stature ratio (WSR) were significantly correlated to PBF. BMI demonstrated the best performance according to the area under the ROC curves in both sexes at cut-off points of 22.5 in women or 25 kg/m(2) in men. WC and WSR showed better performance than WHR to detect obesity. In conclusion, anthropometric indices in young Thai adults were correlated well with PBF to predict obesity as shown in prior reports. Different cut-off points of these indices to define obesity in young Thai adults are recommended. The global cut-off points of WSR in women regardless of ethnicity are supported.

Cinética de engrosamiento de precipitados coherentes en la aleación Fe-10 % Ni-15 % Al

Directory of Open Access Journals (Sweden)

Cayetano-Castro, N.

2008-04-01

Full Text Available The coarsening kinetics and the morphology evolution of the coherent β’ (Fe, NiAl precipitates embedded in a ferritic matrix were studied in the aged Fe-10 % Ni-15 % Al alloy. Samples were solution treated at 1,100°C for 24 h and subsequently aged at 750, 850 and 920 °C for different times. XRD, SEM and TEM results showed the following decomposition reaction after aging treatment, α_sss → α + β. Intragranular particles distribution changes from a random to an aligned on the elastically soft <100> crystallographic directions of the matrix. Additionally, the morphological evolution of the precipitates was as follows: spheres → cuboids → parallelepipeds → plates. The variation of the cube of mean radius of particles, r³, and the particle density as a function of time followed a linear relationship, as predicted by the Lifshitz, Slyosov and Wagner (LSW theory for diffusion-controlled coarsening. The rate constant (K increased with the aging temperature. The activation energy for coarsening process was determined to be about of 220 kJ/mol.

La cinética de engrosamiento y la evolución morfológica de precipitados coherentes β’ (Fe, NiAl en una matriz ferrítica se estudió en la aleación Fe-10 % Ni-15 % Al. Se solubilizaron muestras a 1.100 °C por 24, y posteriormente, se envejecieron a 750, 850 y 920 °C por diferentes tiempos. Los resultados de DRX, MEB y MET mostraron la descomposición, α_sss → α + β, durante su envejecido. La distribución de precipitados dentro del grano cambia, gradualmente, de aleatoria a un alineamiento preferencial sobre las direcciones cristalográficas <100> de la matriz. Asimismo, la evolución morfológica de los precipitados fue: esféricos → cúbicos → paralelepípedos → placas. La variación del tamaño de partícula, r³, y la densidad de precipitados en función del tiempo se comportan linealmente, como lo predice la teoría de Lifshitz

Study of the {phi} meson in the pp{yields}K{sub 1}{sup 0}K{sub 2}{sup 0}{pi}{sup +}{pi}{sup -} K{sub 1}{sup 0}K{sub 2}{sup 0} annihilations at 700-750 MeV/c; Estudio del Meson {phi} en las aniquilaciones pp {yields}{phi}K{sub 1}{sup 0}K{sub 2}{sup 0}{pi}{sup +}{pi}{sup -} K{sub 1}{sup 0}K{sub 2}{sup 0} a 700-750 MeV/c de momento del haz

Energy Technology Data Exchange (ETDEWEB)

Gil Lopez, E

1976-07-01

We have measured the mass and width of the {phi} meson using the pp {yields}{pi}{sup +}{pi}{sup -} K{sub 1}{sup 0}K{sub 2}{sup 0} annihilations at 700-750 MeV/c. The values obtained are in good agreement with proceeding measurements. The mass has been measured with a high accuracy. (Author) 3 refs.

Measurement of K-p radiative capture to γΛ and γΣ0 for pK- between 514 and 750 MeV/c

International Nuclear Information System (INIS)

Prakhov, S.; Phaisangittisakul, N.; Nefkens, B. M. K.; Marusic, A.; McDonald, S.; Price, J. W.; Starostin, A.; Vancraeyveld, P.; De Cruz, L.; Ryckebusch, J.; Van Cauteren, T.; Bekrenev, V.; Koulbardis, A.; Kozlenko, N.; Kruglov, S.; Lopatin, I.; Briscoe, W. J.; Shafi, A.; Strakovsky, I. I.; Isenhower, D.

2010-01-01

Differential cross sections for K - radiative capture in flight on the proton, leading to the γΛ and γΣ 0 final states, have been measured at eight K - momenta between 514 and 750 MeV/c. The data were obtained with the Crystal Ball multiphoton spectrometer installed at the separated K/π beam line C6 of the BNL Alternating Gradient Synchrotron. The results substantially improve the existing experimental data available for studying radiative decays of excited hyperon states. An exploratory theoretical analysis is performed within the Regge-plus-resonance approach. According to this analysis, the γΣ 0 final state is dominated by hyperon-resonance exchange and hints at an important role for a resonance in the mass region of 1700 MeV. In the γΛ final state, in contrast, the resonant contributions account for only half the strength, and the data suggest the importance of a resonance in the mass region of 1550 MeV.

Phase III Randomized Trial of Induction Chemotherapy in Patients With N2 or N3 Locally Advanced Head and Neck Cancer

Science.gov (United States)

Cohen, Ezra E.W.; Karrison, Theodore G.; Kocherginsky, Masha; Mueller, Jeffrey; Egan, Robyn; Huang, Chao H.; Brockstein, Bruce E.; Agulnik, Mark B.; Mittal, Bharat B.; Yunus, Furhan; Samant, Sandeep; Raez, Luis E.; Mehra, Ranee; Kumar, Priya; Ondrey, Frank; Marchand, Patrice; Braegas, Bettina; Seiwert, Tanguy Y.; Villaflor, Victoria M.; Haraf, Daniel J.; Vokes, Everett E.

2014-01-01

Purpose Induction chemotherapy (IC) before radiotherapy lowers distant failure (DF) rates in locally advanced squamous cell carcinoma of the head and neck (SCCHN). The goal of this phase III trial was to determine whether IC before chemoradiotherapy (CRT) further improves survival compared with CRT alone in patients with N2 or N3 disease. Patients and Methods Treatment-naive patients with nonmetastatic N2 or N3 SCCHN were randomly assigned to CRT alone (CRT arm; docetaxel, fluorouracil, and hydroxyurea plus radiotherapy 0.15 Gy twice per day every other week) versus two 21-day cycles of IC (docetaxel 75 mg/m2 on day 1, cisplatin 75 mg/m2 on day 1, and fluorouracil 750 mg/m2 on days 1 to 5) followed by the same CRT regimen (IC + CRT arm). The primary end point was overall survival (OS). Secondary end points included DF-free survival, failure pattern, and recurrence-free survival (RFS). Results A total of 285 patients were randomly assigned. The most common grade 3 to 4 toxicities during IC were febrile neutropenia (11%) and mucositis (9%); during CRT (both arms combined), they were mucositis (49%), dermatitis (21%), and leukopenia (18%). Serious adverse events were more common in the IC arm (47% v 28%; P = .002). With a minimum follow-up of 30 months, there were no statistically significant differences in OS (hazard ratio, 0.91; 95% CI, 0.59 to 1.41), RFS, or DF-free survival. Conclusion IC did not translate into improved OS compared with CRT alone. However, the study was underpowered because it did not meet the planned accrual target, and OS was higher than predicted in both arms. IC cannot be recommended routinely in patients with N2 or N3 locally advanced SCCHN. PMID:25049329

Phase III randomized trial of induction chemotherapy in patients with N2 or N3 locally advanced head and neck cancer.

Science.gov (United States)

Cohen, Ezra E W; Karrison, Theodore G; Kocherginsky, Masha; Mueller, Jeffrey; Egan, Robyn; Huang, Chao H; Brockstein, Bruce E; Agulnik, Mark B; Mittal, Bharat B; Yunus, Furhan; Samant, Sandeep; Raez, Luis E; Mehra, Ranee; Kumar, Priya; Ondrey, Frank; Marchand, Patrice; Braegas, Bettina; Seiwert, Tanguy Y; Villaflor, Victoria M; Haraf, Daniel J; Vokes, Everett E

2014-09-01

Induction chemotherapy (IC) before radiotherapy lowers distant failure (DF) rates in locally advanced squamous cell carcinoma of the head and neck (SCCHN). The goal of this phase III trial was to determine whether IC before chemoradiotherapy (CRT) further improves survival compared with CRT alone in patients with N2 or N3 disease. Treatment-naive patients with nonmetastatic N2 or N3 SCCHN were randomly assigned to CRT alone (CRT arm; docetaxel, fluorouracil, and hydroxyurea plus radiotherapy 0.15 Gy twice per day every other week) versus two 21-day cycles of IC (docetaxel 75 mg/m(2) on day 1, cisplatin 75 mg/m(2) on day 1, and fluorouracil 750 mg/m(2) on days 1 to 5) followed by the same CRT regimen (IC + CRT arm). The primary end point was overall survival (OS). Secondary end points included DF-free survival, failure pattern, and recurrence-free survival (RFS). A total of 285 patients were randomly assigned. The most common grade 3 to 4 toxicities during IC were febrile neutropenia (11%) and mucositis (9%); during CRT (both arms combined), they were mucositis (49%), dermatitis (21%), and leukopenia (18%). Serious adverse events were more common in the IC arm (47% v 28%; P = .002). With a minimum follow-up of 30 months, there were no statistically significant differences in OS (hazard ratio, 0.91; 95% CI, 0.59 to 1.41), RFS, or DF-free survival. IC did not translate into improved OS compared with CRT alone. However, the study was underpowered because it did not meet the planned accrual target, and OS was higher than predicted in both arms. IC cannot be recommended routinely in patients with N2 or N3 locally advanced SCCHN. © 2014 by American Society of Clinical Oncology.

Influence of strain on the growth of thick InGaN layers

International Nuclear Information System (INIS)

Stellmach, J.; Leyer, M.; Pristovsek, M.; Kneissl, M.

2008-01-01

The growth of high quality InGaN alloys is critical for a number of various optoelectronic device applications like LEDs and laser diodes. Nevertheless, the exact growth mechanisms of InGaN with high indium content is still not fully understood. In the present study the growth of thick InGaN layers was systematically investigated. InGaN films with thicknesses between ∝35 nm and ∝200 nm were grown on GaN templates with metal-organic vapour phase epitaxy (MOVPE). The group III partial pressures of 1.1 Pa for TMGa, 0.45 Pa for TMIn and the V/III-ratio of 1600 were kept constant. The growth temperature was varied between 750 C and 800 C. The growth of InGaN layer was characterized by in-situ spectroscopic ellipsometry (SE). Up to temperatures of 790 C structural analysis by XRD showed two strained layers with different indium content. The formation of the layer structure was investigated by varying the growth times at 770 C. In the first 500 s (35 nm) a rough (rms=9 nm) and pseudomorphically strained InGaN layer with low indium content (4%) is formed. Between 500 s and 1000 s this strained layer becomes smoother (rms=3.4 nm). For thicknesses beyond the In content increases (8% at 84 nm) and reaches 11% at 200 nm. We propose that the transition from a first layer with a low indium content to a second layer with an higher indium content is due to a gradual release of strain

Las relaciones coitales y la percepción de riesgo de adquirir ETS/SIDA en adultos jóvenes varones de Lima, Perú

Directory of Open Access Journals (Sweden)

Chirinos Jesús L.

2006-01-01

Full Text Available Para identificar la corresponsabilidad de los varones en el proceso de negociación de protección dual, según género en la primera y última relación sexual, y su percepción de riesgo de ETS/SIDA, se encuestó a 750 varones de 19-29 años en 2.250 viviendas de Lima Metropolitana, Perú, 2001, seleccionados aleatoriamente. La mayoría señaló principalmente el condón como una forma para evitar el embarazo (95%. La primera relación coital fue con la amiga, su pareja estable o una conocida. Casi la mitad de ellos hizo algo para cuidarse, principalmente usó condón para evitar un embarazo, pero su uso consistente y correcto son bajos. El 39,5% tuvo su última relación coital con su pareja estable con quien no vive, con amiga o "conocida", la esposa o conviviente. El diálogo sobre protegerse se incrementa entre la primera y la última relación coital. Su percepción del riesgo de adquirir ETS/SIDA es baja y se protegen sólo con parejas "desconocidas".

76 FR 46149 - Financial Assistance: Wildlife Restoration, Sport Fish Restoration, Hunter Education and Safety

Science.gov (United States)

2011-08-01

... these regulations on June 10, 2010, to address changes in law, regulation, policy, technology, and... Service 50 CFR Part 80 Financial Assistance: Wildlife Restoration, Sport Fish Restoration, Hunter... 80 [Docket No. FWS-R9-WSR-2009-0088; 91400-5110-POLI-7B; 91400-9410-POLI- 7B] RIN 1018-AW65 Financial...

A bilayer diffusion barrier of Ru/WSi{sub x}N{sub y} for advanced Cu interconnects

Energy Technology Data Exchange (ETDEWEB)

Eom, Tae-Kwang; Sari, Windu [School of Materials Science and Engineering, Yeungnam University 214-1, Dae-dong, Gyeongsan-si, Gyeongsangbuk-do, 712-749 (Korea, Republic of); Cheon, Taehoon [Center for Core Research Facilities, Daegu Gyeongbuk Institute of Science and Technology, Sang-ri, Hyeonpung-myeon, Dalseong-gun, Daegu, 711-873 (Korea, Republic of); Kim, Soo-Hyun, E-mail: soohyun@ynu.ac.kr [School of Materials Science and Engineering, Yeungnam University 214-1, Dae-dong, Gyeongsan-si, Gyeongsangbuk-do, 712-749 (Korea, Republic of); Kim, Woo Kyoung [School of Chemical Engineering, Yeungnam University 214-1, Dae-dong, Gyeongsan-si, Gyeongsangbuk-do, 712-749 (Korea, Republic of)

2012-10-30

Bilayers of Ru (7 nm)/WSi{sub x}N{sub y} (8 nm) prepared by sputtering were investigated as diffusion barriers between Cu and Si for direct-platable Cu interconnects. Four different WSi{sub x}N{sub y} films were prepared by using various N{sub 2}/Ar flow rate ratios during sputtering of a WSi{sub 2.7} target. Sheet resistance measurements and X-ray diffractometry analysis showed that Ru/WSi{sub x}N{sub y} bilayer diffusion barriers prevented Cu diffusion during 30 min of annealing at temperatures of up to 550-750 Degree-Sign C, while the Ru single layer of the same thickness (15 nm) failed after annealing at 400 Degree-Sign C by the formation of copper silicide due to the diffusion of Cu into Si. It was shown that the performances of bilayer diffusion barriers were improved as the nitrogen content in the WSi{sub x}N{sub y} films was increased, which can be explained based on the results from transmission electron microscopy and X-ray photoelectron spectroscopy analysis of WSi{sub x}N{sub y} films deposited with different N{sub 2}/Ar flow rate ratios. From the results, the Si-N and W-N chemical bonds are strengthened as the N contents in the WSi{sub x}N{sub y} films are increased by increasing the N{sub 2} flow rate during the deposition. The results indicate that the formation of both Si-N and W-N bonds will give an effective diffusion barrier against Cu diffusion.

Nitride-based quantum structures and devices on modified GaN substrates

International Nuclear Information System (INIS)

Perlin, Piotr; Leszczynski, Mike; Grzegory, Izabella; Franssen, Gijs; Targowski, Grzegorz; Krysko, Marcin; Nowak, Grzegorz; Litwin-Staszewska, Elzbieta; Piotrzkowski, Ryszard; Lucznik, Bolek; Suski, Tadek; Szeszko, Justyna; Czernecki, R.; Grzanka, Szymon; Jakiela, Rafal; Albrecht, Martin

2009-01-01

We have studied the properties of InGaN layers and quantum wells grown on gallium nitride substrates with intentional surface misorientation with respect to its crystalline c-axis. Misorientation varied in the range from 0 up to 2 degree. The indium content was changed by using the different growth temperature (between 750 C and 820 C) during metalorganic vapor phase epitaxy. With increasing misorientation angle the average indium content decreased significantly. This effect was accompanied by the strong increase of the emission line bandwidth suggesting more pronounced indium segregation. The results of cathodoluminescence measurements show that these effects correspond to different number of atomic steps/terraces existing on the surface of gallium nitride substrate. Very interesting result is also demonstrated concerning p-type GaN layers. With increasing misorientation, the free hole density drastically increases above 10 18 cm -3 . This improvement in p-type doping is not related to the increased Mg concentration but to the reduction in the compensating donor density. Using this advantage we demonstrate nitride light emitters with improved electrical properties. (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

EFECTO DEL ÁCIDO SALICÍLICO Y DIMETILSULFÓXIDO EN LA FLORACIÓN DE [Chrysanthemum morifolium(Ramat Kitamura] EN YUCATÁN

Directory of Open Access Journals (Sweden)

E. Villanueva-Couoh

2009-01-01

Full Text Available Con el propósito de evaluar el efecto en la floración y crecimiento de la planta de crisantemo var. Polaris White, varias concentraciones de ácido salicílico (AS 10-6, 10-8 y 10-10 M y Dimetilsulfoxido (DMSO 10-4 M fueron asperjadas a los esquejes. Las cuatro aplicaciones al follaje se realizaron 16 días posteriores al trasplante (DPT, con intervalo de siete días. Se utilizó un diseño completamente al azar con cinco tratamientos y cinco repeticiones. Las plantas asperjadas con DMSO crecieron más (83.6 cm que las plantas asperjadas con 10-6 M (81.0 cm de AS y superaron al testigo (75.0 cm. El diámetro del tallo fue mayor en las plantas asperjadas con AS y DMSO que en las plantas testigo y el tratamiento 10-8 M fue en el que se obtuvieron los valores más altos (8.9 mm. El ácido salicílico (10-6, 10-8 y 10-10 M y el dimetilsulfóxido 10-4 M incrementaron de manera significativa el peso de materia fresca y seca de follaje y raíz, volumen de raíz y área foliar. La floración se alcanzó 113 DPT y también se obtuvo el mayor diámetro de la flor (13.6 y 12.6 cm con los tratamientos 10-8 y 10-10 M, respectivamente. Las concentraciones de N, P y K en hojas y tallos 113 DPT fueron estadísticamente diferentes y los tratamientos con AS y DMSO superaron al testigo. Las concentraciones de N y K fueron de bajas a deficientes pero las concentraciones de P fluctuaron entre suficientes y adecuadas.

Testing of wet scrap recovery equipment for mixed oxide scrap reprocessing

International Nuclear Information System (INIS)

Demiter, J.A.; Klem, M.J.; Owen, T.J.

1984-08-01

The Wet Scrap Recovery (WSR) program was initiated at the Hanford Engineering Development Laboratory (HEDL) by Westinghouse Hanford Company in Richland, Washington to demonstrate fuel fabrication scrap recovery and reconversion to fuel grade oxide powder using the continuous coprecipitation-calcination (COPRECAL) conversion process. Advancements in process control equipment and instrumentation were also developed and demonstrated

Total Lightning as an Indicator of Mesocyclone Behavior

Science.gov (United States)

Stough, Sarah M.; Carey, Lawrence D.; Schultz, Christopher J.

2014-01-01

Apparent relationship between total lightning (in-cloud and cloud to ground) and severe weather suggests its operational utility. Goal of fusion of total lightning with proven tools (i.e., radar lightning algorithms. Preliminary work here investigates circulation from Weather Suveilance Radar- 1988 Doppler (WSR-88D) coupled with total lightning data from Lightning Mapping Arrays.

Properties of ZrN films as substrate masks in liquid phase epitaxial lateral overgrowth of compound semiconductors

International Nuclear Information System (INIS)

Dobosz, D.; Zytkiewicz, Z.R.; Jakiela, R.; Golaszewska, K.; Kaminska, E.; Piotrowska, A.; Piotrowski, T.T.; Barcz, A.

2005-01-01

The usefulness of ZrN films as masks for epitaxial lateral overgrowth of GaAs and GaSb by liquid phase epitaxy is studied. It was observed that during the growth process ZrN masks are mechanically stable, they adhere strongly to the substrate and do not show any signs of degradation even at the growth temperature as high as 750 C. Moreover, perfect selectivity of GaAs and GaSb epitaxy was obtained on ZrN masked substrates ensuring the growth wide and thin layers. To study the influence of growth conditions on electrical resistivity of the mask, ZrN films deposited on GaAs substrates were annealed in various atmospheres. It was found that at temperatures higher than about 580 C the ZrN masks become highly resistive when heat-treated in hydrogen flow employed during growth. Usually, LPE growth temperature for GaAs is higher. Thus, ELO growth of GaAs by LPE becomes more difficult, though still possible, if ZrN masks are to be applied as buried electrical contacts. For GaSb ELO layers however, typical LPE growth temperature is about 480 C. This allows us to grow high quality GaSb ELO layers by LPE still preserving high electrical conductivity of ZrN mask. (copyright 2005 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

Resource Analysis of Cognitive Process Flow Used to Achieve Autonomy

Science.gov (United States)

2016-03-01

core-i3-2100-tested/21, Accessed 10/ 5/ 2015. 23. TechPowerUp, “ NVIDIA GeForce GTX 750 Ti 2 GB Review | techPowerUp,” February 18 2014,http...www.techpowerup.com/reviews/ NVIDIA /GeForce_GTX_750_Ti/23.html, Accessed 10/ 15/ 2015. 24. Altera. n.d., “PowerPlay Early Power Estimators (EPE) and Power

Fermentação ruminal e eficiência microbiana em bezerros holandeses alimentados com dietas contendo diferentes níveis de concentrado Ruminal fermentation and microbial efficiency in Holstein calves fed diets with different concentrate levels

Directory of Open Access Journals (Sweden)

Peter Johann Bürger

2000-02-01

Full Text Available RESUMO - Este trabalho foi realizado para avaliar os efeitos de diferentes níveis de concentrado sobre os parâmetros da fermentação ruminal, as digestibilidades aparente, total, ruminal e intestinal de N, a eficiência microbiana e o balanço de N. Cinco bezerros holandeses, inteiros, fistulados no rúmen e abomaso, com idade média inicial de 5,8±0,7 meses e 107,4±11,0 kg PV médio inicial, foram distribuídos em quadrado latino 5x5 (tratamento x período. Os animais foram alojados em baias individuais e alimentados à vontade com dietas contendo 30,0; 45,0; 60;0; 75,0; e 90,0% de concentrado, com base na MS, em rações contendo como volumoso, o feno de capim coast-cross e no concentrado, o farelo de soja, fubá de milho. Os valores de pH foram influenciados pelos níveis de concentrado das rações, e , 11,3 horas após a alimentação, foram estimandos os valores mínimos de 6,10; 5,89; 5,67; 5,46; e 5,24, para as rações com níveis de 30,0; 45,0; 60,0; 75,0; e 90,0%de concentrado nas rações, respectivamente. A concentração de amônia ruminal reduziu linearmente, em função dos tempos pós-alimentação, apresentando comportamento quadrático, com valores mínimos de 6,84; 7,14; 7,63; 7,82; 8,09; e 8,00 mg/dL, para 86,31; 84,86; 83,41; 81,95; 77,59; e 68,86% de concentrado nas rações. O numero de protozoários ruminais reduziu linearmente com o aumento dos níveis de concentrado nas rações. A eficiência de síntese de compostos nitrogenados microbianos aumentou linearmente com os níveis de concentrado nas rações.ABSTRACT - This work was conducted to evaluate the effects of different concentrate levels on the parameters of at ruminal fermentation, the apparent, total, ruminal and intestinal N digestibilities, the microbial efficiency and the N balance. Five rumen and abomasum fistulated bull Holstein calves, with an initial average age of 5.8±0.7 months and initial average of 107.4±11.0 kg LW were allotted to a 5x5

Photodegradation of Dechlorane Plus in n-nonane under the irradiation of xenon lamp

Energy Technology Data Exchange (ETDEWEB)

Wang, Siwen; Huang, Jun; Yang, Yang; Yu, Gang, E-mail: yg-den@tsinghua.edu.cn; Deng, Shubo; Wang, Bin

2013-09-15

Highlights: • Photodegradation of isomers of Dechlorane Plus (DP) as a potential persistent organic pollutant were studied. • UV-C was found to be the main contributor to DP photodegradation. • DP degradation followed the pseudo first-order kinetics. • Sequential dechlorination was found as the degradation mechanism. -- Abstract: Photodegradation has been regarded as the main mechanism for the removal of many halogenated organic pollutants in the environment. The photodegradation of Dechlorane Plus (DP), an emerging contaminant taken worldwide concerns in recent years, was investigated under the irradiation of a xenon lamp. Rapid photodegradation was found under the irradiation of 200–750 nm light, while the degradation became much slower when the range of light wavelength changed to 280–750 nm. DP degradation followed the pseudo first-order kinetics. The quantum yields of 200–280 nm (UV-C) were about 2–3 orders of magnitude higher than 280–320 nm, and no yields can be detected in 320–750 nm range, in an agreement with the changing photodegradation rates with wavelength. The photodegradation products were identified as lower chlorinated DPs, implicating a mechanism of reductive dechlorination. No photoisomerization or solvent adducts were observed, and the difference of photodegradation rate between syn- and anti-DP isomers was negligible.

Estudio cinético de la reacción del CO con el O2 sobre un catalizador de Pd en alto vacío

Directory of Open Access Journals (Sweden)

Luis M. Carballo Suárez

1988-01-01

Full Text Available La oxidación del monóxido de carbono con el oxígeno sobre una banda de Paladio policristalino bajo condiciones de estado estacionario se investigó con la ayuda de un espectrómetro de masas y con la utilización de monóxido de carbono marcado isotópicamente 13CO. A temperaturas entre 500 y 750 K se varía la proporción de las presiones parciales de los reactantes entre los límites 0,01 hasta 100, y la presión total en el reactor está siempre por debajo de 10-3 mbar. Los resultados experimentales se describen usando una secuencia de pasos elementales que incluye la adsorción y desorción molecular de los reactantes, y la reacción de las dos especies adsorbidas para formar CO2, siendo este último el paso controlante de la reacción. El modelo considera dos clases diferentes de sitios activos. Los cálculos basados sobre valores de los parámetros tomados de la literatura muestran un ajuste aproximado con los datos experimentales.

Laser threshold and optical gain of blue optically pumped InGaN/GaN multiple quantum wells (MQW) grown on Si

International Nuclear Information System (INIS)

Lutsenko, E.V.; Danilchyk, A.V.; Tarasuk, N.P.; Andryieuski, A.V.; Pavlovskii, V.N.; Gurskii, A.L.; Yablonskii, G.P.; Kalisch, H.; Jansen, R.H.; Dikme, Y.; Schineller, B.; Heuken, M.

2008-01-01

Optical and laser properties of a series of MQW heterostructures with varying geometry grown on silicon with Al predeposition were investigated. Photoluminescence (PL) band positions covered a spectral range of 430-460 nm under I exc =1 MW/cm 2 and 445-505 nm under I exc =0.15 W/cm 2 . Laser action was achieved under transversal optical pumping at room temperature using only cleaved lateral facets of the samples as laser mirrors. The laser threshold rose from 137 kW/cm 2 to 300 kW/cm 2 with laser wavelength increase from 440 nm to 465 nm. Numerical simulation of the laser conditions shows that the minimal threshold is realized on the fifth order mode. However, the calculated value of material optical gain of InGaN at the laser threshold increases only from 750 cm -1 to 1020 cm -1 , mainly due to absorption rise in the substrate with increasing wavelength. Correlation was observed between PL characteristics and laser threshold. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

La crisis económica internacional y sus repercusiones en España y en su población inmigrante

Directory of Open Access Journals (Sweden)

Cebrián, Juan A.

2010-07-01

Full Text Available Preceded by a significant flow of immigrants in the last two decades of the twentieth century, the increase of the foreign residents in Spain since 2000 has been extraordinary. In 1999 the number of foreign residents in Spain was 750,000 (1.86% of the total population. Ten years later, foreigners living in Spain are more than 5.5 million (12% of the total population. But after 2007, flows of inmigrant workers have been modified as a result of the global economic downturn. The numbers of new immigrant workers in Spain have been dramatically reduced by the decline in demand in our labor market. The economic recession caused a shift in immigration policy in Spain, which to this point focused on amnesties of large influxes of immigrants in continuous progression. The new Spanish immigration policy is deterrent to those outside, clearly inclusive of those within, open to the repatriation of those who so desire, and, experimentally, fully decentralized.

Repercusiones de la crisis económica internacional en la política inmigratoria española. Precedido por un flujo notable de inmigrantes en la últimas dos décadas del siglo XX, el incremento de la población extranjera residente en España a partir del año 2000 ha sido realmente extraordinario. En 1999 la cifra de residentes extranjeros en España era de 750.000 personas (el 1,86% del total de la población. Diez años más tarde los extranjeros residentes en España son más de 5,5 millones (el 12% de la población total. Pero a partir del año 2007 se han modificado los flujos de inmigrantes laborales, como consecuencia de la recesión económica mundial. Naturalmente, las llegadas de inmigrantes laborales a España se han reducido drásticamente, por el descenso de la demanda de mano de obra en nuestro mercado de trabajo. La contracción de la actividad económica ha provocado un cambio de orientación de la política migratoria del estado español, cuya mayor preocupación hasta ahora

Momento de fertilización nitrogenada de cultivos de maíz en hapludoles típicos

Directory of Open Access Journals (Sweden)

Mirian Barraco

2005-12-01

Full Text Available La producción de maíz (Zea mays L. en la región de la pampa arenosa está parcialmente limitada por la oferta de N del suelo. Si bien es frecuente la fertilización con N, la información en cuanto a los niveles críticos de respuesta y momentos de aplicación del N no es abundante. Nuestro objetivo fue determinar el momento conveniente para la fertilización con N en maíz y cuantificar la relación entre la respuesta del cultivo y algunos indicadores edáficos y de cultivo para su diagnóstico. En las campañas 2001 a 2003 se establecieron 4 sitios experimentales en Hapludoles Típicos en los que se evaluaron 7 tratamientos en un estudio factorial con 2 factores: (a Dosis de fertilización con urea (0,0, 37,5, 75,0 o 150,0 kg ha-1 de N y (b momento de aplicación (siembra o estadio de 6 hojas desplegadas. La producción de grano varió entre 5.023 y 14.757 kg ha-1. No se observaron interacciones entre dosis y momentos de fertilización con N. Tampoco se detectaron diferencias en los rendimientos entre momentos de aplicación pero sí entre las dosis aplicadas. El 90 % de los rendimientos máximos se alcanzaron con niveles de N disponible (Nsuelo siembra + Nfertilizante superiores a 142 kg ha-1 en la capa de 0 a 60 cm de profundidad. La intensidad de coloración verde de las hojas en estadios vegetativos contribuyó a distinguir entre tratamientos con y sin aplicación de N pero fue insuficiente para su utilización como herramienta de diagnóstico de necesidades de fertilización. En Hapludoles Típicos de la región de la pampa arenosa la corrección de necesidades de N para maximizar los rendimientos de maíz requiere de un correcto diagnóstico a partir del análisis de suelo y la aplicación de N indistintamente en el momento de la siembra o en estadios de desarrollo vegetativo.In the sandy Pampas region, corn (Zea mays L. grain production is partially related with soil N availability levels. Although N fertilization is common practice

Caracterización dieléctrica de la perovskita laminar La1.5Sr0.5CoO4

Directory of Open Access Journals (Sweden)

Rivas, J.

2004-06-01

Full Text Available In this work, the behaviour of the real and imaginary components of the dielectric permittivity of layered perovskite La1.5Sr0.5CoO4 have been studied, in the frequency range 20 Hz-1 MHz and in the temperature range 115-350 K. Polycrystalline samples were prepared by the ceramic method. The powder diffraction results showed the pattern of the desired phase together with a small quantities of La2O3 impurities. A comparative study of the electrical and magnetic properties of this charge-ordered compound (TCO∼750 K has revealed a basically semiconductor behaviour with a complex bidimensional antiferromagnetism which can be explained on the basis of a thermally activated evolution of the spin state of the Co3+ ions. A detailed investigation of the dielectric properties of this system has allowed us to identify two superimposed relaxation processes: the first one in the low frequency range (f En este trabajo se estudia el comportamiento de las componentes real e imaginaria de la permitividad dieléctrica compleja en función de la frecuencia (20 Hz-1 MHz y la temperatura (115-350 K de la perovskita laminar La1.5Sr0.5CoO4. Para realizar este estudio preparamos muestras policristalinas utilizando el método cerámico. El análisis por difracción de rayos X mostró la presencia de la fase deseada y una pequeña impureza de La2O3. Un estudio comparativo de las propiedades eléctricas y magnéticas de este compuesto con orden de carga (TCO∼750 K, reveló que básicamente se trata de un material semiconductor con un complejo antiferromagnetismo bidimensional que evoluciona con la temperatura debido a transiciones del estado de espín del Co3+ activadas térmicamente. Una investigación detallada de las propiedades dieléctricas de este sistema nos permitió identificar dos fenómenos de relajación superpuestos: uno presente a bajas frecuencias (f < 102 Hz que se asocia con los procesos de conducción por “hopping” electrónico en este cristal i

Direct minority carrier transport characterization of InAs/InAsSb superlattice nBn photodetectors

International Nuclear Information System (INIS)

Zuo, Daniel; Liu, Runyu; Wasserman, Daniel; Mabon, James; He, Zhao-Yu; Liu, Shi; Zhang, Yong-Hang; Kadlec, Emil A.; Olson, Benjamin V.; Shaner, Eric A.

2015-01-01

We present an extensive characterization of the minority carrier transport properties in an nBn mid-wave infrared detector incorporating a Ga-free InAs/InAsSb type-II superlattice as the absorbing region. Using a modified electron beam induced current technique in conjunction with time-resolved photoluminescence, we were able to determine several important transport parameters of the absorber region in the device, which uses a barrier layer to reduce dark current. For a device at liquid He temperatures, we report a minority carrier diffusion length of 750 nm and a minority carrier lifetime of 200 ns, with a vertical diffusivity of 3 × 10 −2  cm 2 /s. We also report on the device's optical response characteristics at 78 K

Ruido electroquímico de la erosión-corrosión en cobre: su relación con los parámetros hidrodinámicos

Directory of Open Access Journals (Sweden)

Uruchurtu, J.

2010-10-01

Full Text Available This work presents the electrochemical noise results obtained of the surface degradation on copper, due to erosion corrosion phenomena, which were a function of the hydrodynamic parameters of the system (fluid movement. A modified rotating cylinder (RC comprising three ring electrodes under two rotating speeds (880 and 1750 rpm with a Reynolds numbers 1486 Re and 2972 Re, respectively were used. Characteristic electrochemical noise spectra as a function of the hydrodynamic parameters were found, as well as surface attack intensities the noise signal. An increase and a more uniform attack due to particle impact was related to larger particle size and lesser erosion corrosion intensity, in the form of more localized attack over the surface, was obtained for smaller ones. Erosion corrosion attack presents characteristic electrochemical current and potential noise signals, according to the laminar or transitional turbulent regime and particle size added.En este trabajo se presentan los resultados de los efectos del deterioro a la integridad superficial, de muestras de cobre de pureza comercial, debido al fenómeno de erosión-corrosión en presencia de un fluido que contiene partículas de sílice de diversos tamaños, usando la técnica de ruido electroquímico. Esto, en función de los parámetros hidrodinámicos del sistema (movimiento del fluido. Utilizando un electrodo de cilindro rotatorio (CR modificado con tres anillos, se posibilitó a manejarlo empleando dos velocidades de giro (880 y 1.750 rpm y números de Reynolds de 1.486 Re y 2.972 Re, respectivamente. Se encontró patrones característicos de ruido electroquímico en función del régimen de flujo laminar y de transición turbulenta; así como de intensidades de daño en la superficie del material, teniendo una relación con los patrones de ruido electroquímico observados. Se presenta un ataque más uniforme y un aumento del impacto para las partículas de mayor tamaño y una

Ausentismo y complicaciones de salud en usuarios de programas de hipertensión arterial de Santa Marta (Colombia

Directory of Open Access Journals (Sweden)

Brigith Sánchez Serrano

2017-01-01

Full Text Available Objetivo:Identificar los factores presentes y las complicaciones de pacientes inscritos en losprogramas de hipertensión arterial de ocho centros ambulatorios de Santa Marta.Metodología:Estudio descriptivo, ambispectivo y multicéntrico; población conformada por24 programas de prevención y control de hipertensión arterial, seleccionados aleatoriamenteocho de ellos (30 %. De los 750 casos de inasistentes se calculó un tamaño muestral de 254,valor elevado a 300 para reducir el error de estimación. La información se recolectó medianteun cuestionario de identificación de condiciones de habilitación de programas, base de datos deinasistentes y aplicación de entrevista semiestructurada.Resultados:El porcentaje de incumplimiento de las condiciones de los programas de hipertensiónfue de (9 %; el récord de ausentismo de pacientes inscritos fue de 35,62 %. Mientras que losprincipales factores que motivaron el ausentismo fueron de orden institucional (32,6 %, personal(26,3 %, socioeconómicos (8.5 %, otras alternativas de tratamiento (9,4 %; las complicacionesmanifestadas sobresalientes se relacionaron con angina de pecho (34,1 %, alteraciones renales(29,2 % e infartos (9.7 %.Conclusiones:A pesar de los esfuerzos que llevan a cabo los organismos de salud para laprevención y el control de la hipertensión, aún es necesario desarrollar nuevas estrategias quereduzca el índice de ausentismo de los pacientes inscritos a dichos programas, y de esa maneracontribuir positivamente en la reducción de las tasas de complicaciones en la salud.

Implementation of a Single-Phase SST for the Interface between a 13.2 kV MVAC Network and a 750 V Bipolar DC Distribution

Directory of Open Access Journals (Sweden)

Hyeok-Jin Yun

2018-05-01

Full Text Available This paper presents the implementation of a single-phase solid-state transformer (SST for the interface between a 13.2 kV medium voltage alternative current (MVAC network and a 750 V bipolar DC distribution. The SST has ten cascaded subunits in consideration of the device rating and modulation index (MI. Each subunit consists of an AC/DC stage and a DC/DC stage with a high frequency isolated transformer (HFIT. The AC/DC stage consists of cascaded H-bridges (CHBs to cope with the MVAC. The DC/DC stage employs a triple active bridge (TAB converter for bipolar DC distribution. Topology analysis and controller design for this specific structure are discussed. In addition, the insulation of HFIT used in DC/DC converters is also discussed. A simple balancing controller at the AC/DC stage and a current sharing controller at the DC/DC stage are used to prevent DC-link voltage unbalance caused by the cascaded structure. The discussions are validated using a 150 kW single-phase 21-level SST prototype at the laboratory level.

Comportamiento de la retinopatía de la prematuridad en el Hospital General "Iván Portuondo"en el año 2009 Behavior of the retinopathy of prematurity in "Iván Portuondo" hospital in 2009

Directory of Open Access Journals (Sweden)

Yusimik Toledo González

2010-01-01

Full Text Available OBJETIVO: Conocer el comportamiento de la retinopatía de la prematuridad en los nacidos de menos de 1750 gramos o menos de 35 semanas. MÉTODOS: Estudio observacional descriptivo longitudinal prospectivo de todos los niños bajo peso nacidos en el Hospital General "Iván Portuondo", desde enero de 2009 a diciembre de 2009, en el que se obtuvieron un total de 129 niños bajo peso. El protocolo de investigación está formado por los menores de 1 750 gramos de peso al nacer o con edad gestacional inferior a 35 semanas, además se valoraron algunos factores de riesgo. Se excluyeron del estudio los fallecidos en ese período. RESULTADOS: La incidencia fue de 0,24 por cada 10 000 nacidos vivos mediante examen oftalmológico. El 69,35 % de los recién nacidos pesquisados nacieron entre las 32 y las 35 semanas de gestación y 40,32 % con un peso entre 1 500-1 999 gramos. El 93,54 % de los recién nacidos presentaron retina inmadura y un 3,22 % desarrollaron retinopatía de la prematuridad. La misma cantidad de casos se trataron con láser y terapia tópica 50 %, respectivamente. CONCLUSIÓN: Los valores sobre pacientes con retinopatía de la prematuridad en Cuba se encuentran dentro de los aceptados internacionales y estos se mueven a la par con el aumento de la supervivencia de los recién nacidos. Entre los factores que influyen proporcionalmente con esta enfermedad permanecen la edad gestacional y el peso al nacer. El láser se mantiene como estándar de tratamiento.OBJECTIVES: To learn about the behavior of the retinopathy of prematurity in newborns under 1750 grams of weight or 35 weeks of gestation. METHODS: Prospective longitudinal descriptive and observational study of all low birthweighed children at "Iván Portuondo" hospital, from January to December of 2009. A total of 129 low birth weight children were detected; the research protocol was formed by under 1 750 g birth weight or gestational age under 35 weeks in addition to assessing some

International incidence of childhood cancer, 2001-10: a population-based registry study.

Science.gov (United States)

Steliarova-Foucher, Eva; Colombet, Murielle; Ries, Lynn A G; Moreno, Florencia; Dolya, Anastasia; Bray, Freddie; Hesseling, Peter; Shin, Hee Young; Stiller, Charles A

2017-06-01

Cancer is a major cause of death in children worldwide, and the recorded incidence tends to increase with time. Internationally comparable data on childhood cancer incidence in the past two decades are scarce. This study aimed to provide internationally comparable local data on the incidence of childhood cancer to promote research of causes and implementation of childhood cancer control. This population-based registry study, devised by the International Agency for Research on Cancer in collaboration with the International Association of Cancer Registries, collected data on all malignancies and non-malignant neoplasms of the CNS diagnosed before age 20 years in populations covered by high-quality cancer registries with complete data for 2001-10. Incidence rates per million person-years for the 0-14 years and 0-19 years age groups were age-adjusted using the world standard population to provide age-standardised incidence rates (WSRs), using the age-specific incidence rates (ASR) for individual age groups (0-4 years, 5-9 years, 10-14 years, and 15-19 years). All rates were reported for 19 geographical areas or ethnicities by sex, age group, and cancer type. The regional WSRs for children aged 0-14 years were compared with comparable data obtained in the 1980s. Of 532 invited cancer registries, 153 registries from 62 countries, departments, and territories met quality standards, and contributed data for the entire decade of 2001-10. 385 509 incident cases in children aged 0-19 years occurring in 2·64 billion person-years were included. The overall WSR was 140·6 per million person-years in children aged 0-14 years (based on 284 649 cases), and the most common cancers were leukaemia (WSR 46·4), followed by CNS tumours (WSR 28·2), and lymphomas (WSR 15·2). In children aged 15-19 years (based on 100 860 cases), the ASR was 185·3 per million person-years, the most common being lymphomas (ASR 41·8) and the group of epithelial tumours and melanoma (ASR 39·5

Marcadores de inflamación y disfunción endotelial en niños con diabetes tipo 1 Inflammation markers and endothelial disfunction in children with type 1 diabetes

Directory of Open Access Journals (Sweden)

María S. Velarde

2010-02-01

Full Text Available Se ha hallado un estado inflamatorio subclínico ha sido informado en la fase temprana de la diabetes, el cual incrementa los niveles séricos de citoquinas que inducen la síntesis de proteínas de fase aguda como la proteína C reactiva (PCR y el fibrinógeno (Fg, y estimula la expresión endotelial de moléculas de adhesión. Se estudiaron 30 pacientes (15 varones y 15 mujeres con diabetes tipo 1 (DT1, de 11.8 ± 2.1 años de edad y 3.9 ± 3.2 años de evolución de la enfermedad, sin complicaciones vasculares. Se realizó recuento de leucocitos, velocidad de sedimentación globular (VSG, glucemia en ayunas, hemoglobina glicosilada (HbA1c, Fg, PCR ultrasensible (uPCR, determinación E-selectina soluble (sE-S, molécula de adhesión vascular celular 1 (VCAM-1 y microalbuminuria. Se encontraron niveles aumentados de uPCR, sE-S y VCAM-1 en los pacientes diabéticos comparados con el grupo control [0.60 (0.30-1.25 vs. 0.20 (0.20-0.65 mg/l, p = 0.013], [108 (60-150 vs. 68 (56-82 ng/ml, p = 0.0031] y [750 (708-826 vs. 721 (674-751 ng/ml, p = 0.039] respectivamente. Al agrupar a los diabéticos de acuerdo a la duración de la enfermedad (= 3 y > de 3 años, los valores de uPCR fueron mayores en el segundo grupo. La uPCR se correlacionó con sE-S (r = 0.44, p = 0.03 y con VCAM-1 (r = 0.49, p = 0.02. Estos resultados sugieren la presencia de un estado proinflamatorio y de activación endotelial estrechamente asociados en la DT1.A subclinical inflammation state was detected in the early step of diabetes, which increases the serum levels of cytokines that induce acute-phase protein synthesis as C-reactive protein (PCR and fibrinogen (Fg, stimulating the endothelial disfunction of adhesion molecules. Thirty patients (15 boys, 15 girls with type 1 diabetes (DT1, without vascular complications, were studied. Their mean age and duration of diabetes were 11.8 ± 2.1 and 3.9 ± 3.2 years, respectively. The laboratory parameters evaluated were: blood

Formulation of gastroretentive floating drug delivery system using hydrophilic polymers and its in vitro characterization

Directory of Open Access Journals (Sweden)

Venkata Srikanth Meka

2014-04-01

Full Text Available The aim of the present research is to formulate and evaluate the gastroretentive floating drug delivery system of antihypertensive drug, propranolol HCl. Gastroretentive floating tablets (GRFT were prepared by using a synthetic hydrophilic polymer polyethylene oxide of different grades such as PEO WSR N-12 K and PEO 18 NF as release retarding polymers and calcium carbonate as gas generating agent. The GRFT were compressed by direct compression strategy and the tablets were evaluated for physico-chemical properties, in vitro buoyancy, swelling studies, in vitro dissolution studies and release mechanism studies. From the dissolution and buoyancy studies, F 9 was selected as an optimized formulation. The optimized formulation followed zero order rate kinetics with non-Fickian diffusion mechanism. The optimized formulation was characterised with FTIR studies and observed no interaction between the drug and the polymers.

Mineralogía y condiciones de cristalización en el complejo subvolcánico de Barcarrota (Badajoz, España

Directory of Open Access Journals (Sweden)

Casquet, C.

1987-08-01

Full Text Available A description of mineral chemistry from rocks of the subvolcanic Barcarrota Complex is made. This igneous massif consists of several sub-alkaline lithologies, namely olivine gabbros, diorites, quartz-monzonites and amphibole granites, as well as minor peralkaline granites. Physico-chemical conditions during magma crystallization are obtained on the basis of mineral data. Thus different geothermometers lead to the following crystallization temperatures: olivine gabbros (972-1.008° C, diorites (953-995° C, quartz-monzonites (801-833° C and amphibole granites 750° C. The presence of illmenite as the sole Fe-Ti mineral in these rocks (except in the peralkaline types where it is magnetite, sugests that the fO2 was never higher than the MW buffer, decreasing continuously with the differentiation degree fram fO2= 1O-13.2 atm. for the olivine gabbros to 10-18.87 atm. in the granites Furthemore water played an important role during crystallization of the different magmas.Se estudian las características químicas de los minerales más significativos del Complejo subvolcánico de Barcarrota, formado por litologías subalcalinas consistentes en: gabros olivínicos, dioritas, cuarzo-monzonitas y granitos anfibólicos, así como por pequeños afloramientos de granitos peralcalinos. Estos datos se emplean para definir las condiciones físico-químicas de cristalización magmática. Mediante distintos geotermómetros se obtienen las siguientes temperaturas de cristalización: Gabras olivínicos (972-1008º C, Dioritas (953-995º C, Cuarzo-monzonitas (801-833º C y los Granitos anfibólicos 750º C. La presencia como único óxido de FeTi, de ilmenita en todas las rocas excepto en los tipos peralcalinos, que es magnetita, indica que la fO2 no superó las condiciones del tampón MW, decreciendo con el grado de diferenciación (fO2= 10-132 en los gabros olivínicos hasta 10-18,87 en los granitos. La presencia de agua debió jugar un notable

Evaluación del ribósido de alopurinol contra la leishmaniasis cutánea ecuatoriana

Directory of Open Access Journals (Sweden)

Martha Chico

1995-09-01

Full Text Available Se realizó un estudio randomizado de 75 pacientes con leishmaniasis cutánea ecuatoriana con el fin de determinar el índice terapéutico de una nueva droga oral antileishmania, el ribósido de alopurinol más probenecid. Este agente fue evaluado comparándolo con controles positivos que se trataron con pentostam y con testigos no tratados. Las medidas de las lesiones disminuyeron rápidamente durante la terapia, lo que permitió determinar el porcentaje de cicatrización en los diferentes grupos. En el día 70 se realizó la evaluación de la curación de los pacientes en los diferentes grupos, obteniéndose: alopurinol (1.500 mg/6 h más probenecid (500 mgI6 h por 28 días, dió una curación con lesiones cicatrizadas en 10 (45,5% de los 22 pacientes. Con pentostam (20 mg Sblkgtdía, IM por 20 días se obtuvo una curación en 28 pacientes siendo esto el 100% de cicatrización. El grupo de no tratamiento presentó un porcentaje muy elevado de curación espontánea en 9 (75,0% de los 12 pacientes. Todos los pacientes con tratamiento fallido o recidivas recibieron posteriormente tratamiento con pentostam. Este estudio sugiere que el ribósido de alopurinol más probenecid no es una droga con mayor eficacia contra la leishmaniasis cutánea ecuatoriana.

Effect of post weld heat treatment on the microstructure and tensile properties of activated flux TIG welds of Inconel X750

Energy Technology Data Exchange (ETDEWEB)

Ramkumar, K. Devendranath, E-mail: ramdevendranath@gmail.com; Ramanand, R.; Ameer, Ajmal; Simon, K. Aghil; Arivazhagan, N.

2016-03-21

This study addresses the effect of post weld heat treatment on the fusion zone microstructure and the mechanical properties of activated flux tungsten inert gas (A-TIG) weldments of Inconel X750. In this study, a compound flux of 50% SiO{sub 2}+50% MoO{sub 3} was used for A-TIG welding of the samples. Comparative studies on the microstructure and mechanical properties have been made on the weldments both in the as-welded and post weld heat treated conditions. Direct ageing post weld heat treatment (PWHT) was carried out at 705 °C for 22 h on the A-TIG weldment to assess the structure–property relationships. It was inferred that direct ageing post weld heat treatment resulted in better tensile strength (1142 MPa) compared to the as-welded coupons (736 MPa). The joint efficiencies of the as-welded and post weld heat treated conditions were found to be 60.7% and 94.07% respectively. The impact toughness of the as-welded coupons were found to be greater than the post weld heat treated samples; however the impact toughness of the welds are greater than the parent metal employed in both the cases. This study also attested the detailed structure–property relationships of A-TIG weldments using the combined techniques of optical and scanning electron microscopy, Electron Dispersive X-ray Analysis (EDAX) techniques.

Effect of post weld heat treatment on the microstructure and tensile properties of activated flux TIG welds of Inconel X750

International Nuclear Information System (INIS)

Ramkumar, K. Devendranath; Ramanand, R.; Ameer, Ajmal; Simon, K. Aghil; Arivazhagan, N.

2016-01-01

This study addresses the effect of post weld heat treatment on the fusion zone microstructure and the mechanical properties of activated flux tungsten inert gas (A-TIG) weldments of Inconel X750. In this study, a compound flux of 50% SiO_2+50% MoO_3 was used for A-TIG welding of the samples. Comparative studies on the microstructure and mechanical properties have been made on the weldments both in the as-welded and post weld heat treated conditions. Direct ageing post weld heat treatment (PWHT) was carried out at 705 °C for 22 h on the A-TIG weldment to assess the structure–property relationships. It was inferred that direct ageing post weld heat treatment resulted in better tensile strength (1142 MPa) compared to the as-welded coupons (736 MPa). The joint efficiencies of the as-welded and post weld heat treated conditions were found to be 60.7% and 94.07% respectively. The impact toughness of the as-welded coupons were found to be greater than the post weld heat treated samples; however the impact toughness of the welds are greater than the parent metal employed in both the cases. This study also attested the detailed structure–property relationships of A-TIG weldments using the combined techniques of optical and scanning electron microscopy, Electron Dispersive X-ray Analysis (EDAX) techniques.

Diffusion barrier performance of novel Ti/TaN double layers for Cu metallization

International Nuclear Information System (INIS)

Zhou, Y.M.; He, M.Z.; Xie, Z.

2014-01-01

Highlights: • Novel Ti/TaN double layers offering good stability as a barrier against Cu metallization have been made achievable by annealing in vacuum. • The Ti/TaN double layers improved the adhesion with Cu thin films and showed good diffusion barrier between Cu and SiO 2 /Si up to the annealing condition. • The failure mechanism of Ti/TaN bi-layer is similar with the Cu/TaN/Si metallization system in which Cu atoms diffuse through the grain boundary of barrier and react with silicon to form Cu 3 Si. - Abstract: Novel Ti/TaN double layers offering good stability as a barrier against Cu metallization have been made achievable by annealing in vacuum better than 1 × 10 −3 Pa. Ti/TaN double layers were formed on SiO 2 /Si substrates by DC magnetron sputtering and then the properties of Cu/Ti/TaN/SiO 2 /Si film stacks were studied. It was found that the Ti/TaN double layers provide good diffusion barrier between Cu and SiO 2 /Si up to 750 °C for 30 min. The XRD, Auger and EDS results show that the Cu–Si compounds like Cu 3 Si were formed by Cu diffusion through Ti/TaN barrier for the 800 °C annealed samples. It seems that the improved diffusion barrier property of Cu/Ti/TaN/SiO 2 /Si stack is due to the diffusion of nitrogen along the grain boundaries in Ti layer, which would decrease the defects in Ti film and block the diffusion path for Cu diffusion with increasing annealing temperature. The failure mechanism of Ti/TaN bi-layer is similar to the Cu/TaN/Si metallization system in which Cu atoms diffuse through the grain boundary of barrier and react with silicon to form Cu 3 Si

Nuevas construcciones y trabajos de ampliación de la siderurgia Lohr, en Lohr-am-Main, Alemania

Directory of Open Access Journals (Sweden)

Siegel, Curt

1964-06-01

Full Text Available The geometrical properties of the hyperbolic paraboloid provided certain advantages to the architects, when they designed the new casting mill of the Lohr steel works, especially in regard to illumination and ventilation. Two similar hyperbolic parabolic surfaces, bounded by three straight and two curved edges, and joined together by a transition surface, form the top part of the ventilation dome. The northern elevation constitutes a skylight, of trapeze-like shape. Each of these domes, whose plan dimensions are 13.5 by 15 ms, rest on isolated supports, which, in turn, along the longitudinal direction of the nave, serve to support a bridge crane, with a 13.5 m span. The lower part of the nave has a height of 7.50 m, up to the springers of the roofing shell. The total height to the top of the dome is 16.3 m, so that the shell roof has a rise of 8.8 m. The statical behaviour of the roof was investigated on a reduced 1:10 scale model. As there is always excess heat inside the nave, there has been no need for thermal insulation. Advantage has also been taken of the high degree of waterproofness of high quality concrete, in order to avoid the need of applying any external waterproofing treatment. This project can be regarded as a significant contribution to current progress in shell roof construction.La geometría del paraboloide-hiperbólico ofreció una serie de posibilidades a los arquitectos—cuando diseñaron las dos nuevas naves de fundición de la siderurgia Lohr—para conseguir una perfecta ventilación y una buena iluminación. Dos superficies hiperbólico-parabólicas, exactamente iguales, limitadas por tres bordes rectos y dos curvos, se elevan para terminar en una pieza de transición, que forma la parte superior de la campana de ventilación cuyo alzado norte está constituido por un lucernario de forma trapecial. Cada una de las campanas, cuyas dimensiones en planta son 13,50x15,00 m, se apoya en cuatro soportes aislados, que, a su

A Cultural Resources Inventory of the Proposed Dry Impoundment Area North of Ross Barnett Reservoir and Field Reconnaissance of the Pearl River, between River Miles 278 and 301, in the Vicinity of Jackson, Mississippi.

Science.gov (United States)

1982-08-01

three person crew. ’lowove r t he crew was spl it upl into sinalI ocr crew,, when suirveyl ip, some of the sinaI icr irn; N to-tail -f 31 ,Iin (lav-; w:i...37,000 BP (Wornli otn 197:58-59). 4-I I.. A. 1). (J~ 2000 B. C. ~ 50() -1750 750 - - 1000 i o 50 1500 U( 1000 400() .~750 -r- 500. 6000 m250 A. D. 0 I

PEMBUATAN AYAKAN MOLEKULER BERBASIS KARBON UNTUK PEMISAHAN N2/O2 DARI PIROLISIS RESIN PHENOL FORMALDEHYDE

Directory of Open Access Journals (Sweden)

Imam Prasetyo

2012-02-01

Full Text Available Proses pemisahan campuran gas dengan menggunakan carbon molecular sieve (CMS atau ayakan molekuler berbasis karbon merupakan teknologi proses pemisahan yang mulai banyak diterapkan di dalam industri kimia. Dalam penelitian ini, CMS untuk pemisahan N2 dari udara dibuat dari pirolisis bahan polimer sintetis yaitu resin phenol formaldehyde (PF. Prekursor yang berupa resin tersebut dipanaskan dalam retort pada suhu 400-950oC selama 0,5-3 jam yang disertai dengan pengaliran gas N2 ke dalam retort dengan laju 100 mL/jam. Dengan proses pirolisis, atom-atom non-karbon penyusun bahan polimer akan terurai dan menguap sehingga hanya menyisakan arang karbon dengan struktur kerangka atom karbon yang sesuai dengan struktur kerangka dasar rantai polimer. Kemudian karbon hasil prolisis tersebut dipanaskan lebih lanjut pada suhu 750-950oC sambil dialiri gas CO2 selama 1 jam. Pada kondisi ini karbon akan mengalami proses gasifikasi parsial sehingga terbentuk karbon dengan porositas tinggi. Melalui rekayasa proses polimerisasi dan karbonisasi dihasilkan material karbon berpori yang mayoritas porinya adalah mikropori dengan ukuran pori efektif < 2 nm yang dapat dikategorikan sebagai CMS yang dapat dipergunakan untuk memisahkan campuran gas N2-O2.  Pada penelitian ini dihasilkan CMS dengan selektifitas kinetis DN2/DO2 sekitar 3.

Interdiffusion effect on GaAsSbN/GaAs quantum well structure studied by 10-band k·p model

International Nuclear Information System (INIS)

Dang, Y.X.; Fan, W.J.; Ng, S.T.; Wicaksono, S.; Yoon, S.F.; Zhang, D.H.

2007-01-01

The effect of annealing on the photoluminescence (PL) in GaAsSbN/GaAs quantum well (QW) grown by solid-source molecular-beam epitaxy (SS-MBE) has been investigated. Low-temperature (4 K) PL peaks shift to higher energy sides with the increase of annealing temperature. An As-Sb atomic interdiffusion at the heterointerface is proposed to model this effect. The compositional profile of the QW after interdiffusion is modeled by an error function distribution and calculated with the 10-band k·p method. When the diffusion length equals to 1.4 nm, a corresponding transition energy blueshift of 36 meV is derived. This agrees with the experimental result under the optimum condition (750 deg. C at 5 min)

Calculo Preliminar de la Tasa de Meteorización del Batolito Antioqueño, Cordillera Central, Colombia

Directory of Open Access Journals (Sweden)

Carolina Garcia

2004-12-01

Full Text Available Este trabajo es una estimación preliminar del tiempo necesario para generar la espesa capa de saprolito que caracteriza el perfil de meteorización actual de un batolito cuarzodiorítico cretácico que aflora en altiplanos de la Cordillera Central de Colombia, entre 5º50' y 7º00' de latitud Norte y 74º50' y 75º35' de longitud Oeste y a alturas entre 750 y 2700 m.Se utilizan datos obtenidos previamente mediante el análisis de la composición química de las aguas superficiales de cuatro cuencas con áreas diferentes, ubicadas sobre el Batolito Antioqueño, al este de Medellín. Los cáculos se hicieron con el método basado en la pérdida de componentes en solución utilizando diferentes valores de solutos. Al utilizar la pérdida de sílice se obtiene un tiempo de meteorización de unos 6 x 10 6 años, comparable con el obtenido mediante la datación de las cenizas volcánicas mas antiguas que recubren la topografía actual y que indican la fecha mínima de configuración de la superficie de erosión.A pesar de resultar de una serie de suposiciones simplificadoras, este resultado es interesante y justifica la realización de determinaciones mas detalladas. Confirma la larga preservación de superficies de erosión antiguas conformadas sobre un saprolito que desde hace varios millones de años no ha sido sometido a una erosión profunda, fenómeno poco común en una zona tectónicamente activa como la estudiada.

Psychological and Unconventional Warfare, 1941-1952: Origins of a Special Warfare Capability for the United States Army

Science.gov (United States)

1979-11-01

nic -,L-dant orer unconventional wsr:fare? In shnrt, wfiat were-the pre-1952 roots of tbe’ P9ych𔃺rg1.ca1 WArfArPg Contme" artx], cMocom~tant y, the...General Robert A. McClure, 30 March 1948, from Co’.onel William S. Biddle , Assistant Chief, Plans and Policy Group, 1, 319, Plans and Operations Division

Divergent N Deficiency-Dependent Senescence and Transcriptome Response in Developmentally Old and Young Brassica napus Leaves.

Science.gov (United States)

Safavi-Rizi, Vajiheh; Franzaring, Jürgen; Fangmeier, Andreas; Kunze, Reinhard

2018-01-01

In the spring oilseed rape (OSR) cultivar 'Mozart' grown under optimal N supply (N O ) or mild N deficiency (N L ) the transcriptome changes associated with progressing age until early senescence in developmentally old lower canopy leaves (leaf #4) and younger higher canopy leaves (leaf #8) were investigated. Twelve weeks old N O and N L plants appeared phenotypically and transcriptomically identical, but thereafter distinct nutrition-dependent differences in gene expression patterns in lower and upper canopy leaves emerged. In N O leaves #4 of 14-week-old compared to 13-week-old plants, ∼600 genes were up- or downregulated, whereas in N L leaves #4 ∼3000 genes were up- or downregulated. In contrast, in 15-week-old compared to 13-week-old upper canopy leaves #8 more genes were up- or downregulated in optimally N-supplied plants (∼2000 genes) than in N-depleted plants (∼750 genes). This opposing effect of N depletion on gene regulation was even more prominent among photosynthesis-related genes (PSGs). Between week 13 and 14 in leaves #4, 99 of 110 PSGs were downregulated in N L plants, but none in N O plants. In contrast, from weeks 13 to 16 in leaves #8 of N L plants only 11 PSGs were downregulated in comparison to 66 PSGs in N O plants. Different effects of N depletion in lower versus upper canopy leaves were also apparent in upregulation of autophagy genes and NAC transcription factors. More than half of the regulated NAC and WRKY transcription factor, autophagy and protease genes were specifically regulated in N L leaves #4 or N O leaves #8 and thus may contribute to differences in senescence and nutrient mobilization in these leaves. We suggest that in N-deficient plants the upper leaves retain their N resources longer than in amply fertilized plants and remobilize them only after shedding of the lower leaves.

Doppler Radar and Lightning Network Observations of a Severe Outbreak of Tropical Cyclone Tornadoes

Science.gov (United States)

Mccaul, Eugene W., Jr.; Buechler, Dennis E.; Goodman, Steven J.; Cammarata, Michael

2004-01-01

Data from a single Weather Surveillance Radar-1988 Doppler (WSR-88D) and the National Lightning Detection Network are used to examine the characteristics of the convective storms that produced a severe tornado outbreak, including three tornadoes that reached F3 intensity, within Tropical Storm Beryl s remnants on 16 August 1994. Comparison of the radar data with reports of tornadoes suggests that only 13 cells produced the 29 tornadoes that were documented in Georgia and the Carolinas on that date. Six of these cells spawned multiple tornadoes, and the radar data confirm the presence of miniature supercells. One of the cells was identifiable on radar for 11 h. spawning tornadoes over a time period spanning approximately 6.5 h. Several other tornadic cells also exhibited great longevity, with cell lifetimes longer than ever previously documented in a landfalling tropical cyclone (TC) tornado event. This event is easily the most intense TC tornado outbreak yet documented with WSR-88Ds. Time-height analyses of the three strongest tornadic supercells are presented in order to document storm kinematic structure and to show how these storms appear at different ranges from a WSR-88D. In addition, cloud-to-ground (CG) lightning data are examined in Beryl s remnants. Although the tornadic cells were responsible for most of Beryl's CG lightning, their flash rates were only weak to moderate, and in all the tornadic storms the lightning flashes were almost entirely negative in polarity. A few of the single-tornado storms produced no detectable CG lightning at all. There is evidence that CG lightning rates decreased during the tornadoes, compared to 30-min periods before the tornadoes. A number of the storms spawned tornadoes just after producing their final CG lightning flashes. Contrary to the findings for flash rates, both peak currents and positive flash percentages were larger in Beryl's nontornadic storms than in the tornadic ones.

Improving Radar Quantitative Precipitation Estimation over Complex Terrain in the San Francisco Bay Area

Science.gov (United States)

Cifelli, R.; Chen, H.; Chandrasekar, V.

2017-12-01

A recent study by the State of California's Department of Water Resources has emphasized that the San Francisco Bay Area is at risk of catastrophic flooding. Therefore, accurate quantitative precipitation estimation (QPE) and forecast (QPF) are critical for protecting life and property in this region. Compared to rain gauge and meteorological satellite, ground based radar has shown great advantages for high-resolution precipitation observations in both space and time domain. In addition, the polarization diversity shows great potential to characterize precipitation microphysics through identification of different hydrometeor types and their size and shape information. Currently, all the radars comprising the U.S. National Weather Service (NWS) Weather Surveillance Radar-1988 Doppler (WSR-88D) network are operating in dual-polarization mode. Enhancement of QPE is one of the main considerations of the dual-polarization upgrade. The San Francisco Bay Area is covered by two S-band WSR-88D radars, namely, KMUX and KDAX. However, in complex terrain like the Bay Area, it is still challenging to obtain an optimal rainfall algorithm for a given set of dual-polarization measurements. In addition, the accuracy of rain rate estimates is contingent on additional factors such as bright band contamination, vertical profile of reflectivity (VPR) correction, and partial beam blockages. This presentation aims to improve radar QPE for the Bay area using advanced dual-polarization rainfall methodologies. The benefit brought by the dual-polarization upgrade of operational radar network is assessed. In addition, a pilot study of gap fill X-band radar performance is conducted in support of regional QPE system development. This paper also presents a detailed comparison between the dual-polarization radar-derived rainfall products with various operational products including the NSSL's Multi-Radar/Multi-Sensor (MRMS) system. Quantitative evaluation of various rainfall products is achieved

Value of a dual-polarized gap-filling radar in support of southern California post-fire debris-flow warnings

Science.gov (United States)

Jorgensen, David P.; Hanshaw, Maiana N.; Schmidt, Kevin M.; Laber, Jayme L; Staley, Dennis M.; Kean, Jason W.; Restrepo, Pedro J.

2011-01-01

A portable truck-mounted C-band Doppler weather radar was deployed to observe rainfall over the Station Fire burn area near Los Angeles, California, during the winter of 2009/10 to assist with debris-flow warning decisions. The deployments were a component of a joint NOAA–U.S. Geological Survey (USGS) research effort to improve definition of the rainfall conditions that trigger debris flows from steep topography within recent wildfire burn areas. A procedure was implemented to blend various dual-polarized estimators of precipitation (for radar observations taken below the freezing level) using threshold values for differential reflectivity and specific differential phase shift that improves the accuracy of the rainfall estimates over a specific burn area sited with terrestrial tipping-bucket rain gauges. The portable radar outperformed local Weather Surveillance Radar-1988 Doppler (WSR-88D) National Weather Service network radars in detecting rainfall capable of initiating post-fire runoff-generated debris flows. The network radars underestimated hourly precipitation totals by about 50%. Consistent with intensity–duration threshold curves determined from past debris-flow events in burned areas in Southern California, the portable radar-derived rainfall rates exceeded the empirical thresholds over a wider range of storm durations with a higher spatial resolution than local National Weather Service operational radars. Moreover, the truck-mounted C-band radar dual-polarimetric-derived estimates of rainfall intensity provided a better guide to the expected severity of debris-flow events, based on criteria derived from previous events using rain gauge data, than traditional radar-derived rainfall approaches using reflectivity–rainfall relationships for either the portable or operational network WSR-88D radars. Part of the reason for the improvement was due to siting the radar closer to the burn zone than the WSR-88Ds, but use of the dual-polarimetric variables

Las relaciones coitales y la percepción de riesgo de adquirir ETS/SIDA en adultos jóvenes varones de Lima, Perú Sexual relations and the perception of risk of acquiring STD/AIDS among young adult men in Lima, Peru

Directory of Open Access Journals (Sweden)

Jesús L. Chirinos

2006-01-01

Full Text Available Para identificar la corresponsabilidad de los varones en el proceso de negociación de protección dual, según género en la primera y última relación sexual, y su percepción de riesgo de ETS/SIDA, se encuestó a 750 varones de 19-29 años en 2.250 viviendas de Lima Metropolitana, Perú, 2001, seleccionados aleatoriamente. La mayoría señaló principalmente el condón como una forma para evitar el embarazo (95%. La primera relación coital fue con la amiga, su pareja estable o una conocida. Casi la mitad de ellos hizo algo para cuidarse, principalmente usó condón para evitar un embarazo, pero su uso consistente y correcto son bajos. El 39,5% tuvo su última relación coital con su pareja estable con quien no vive, con amiga o "conocida", la esposa o conviviente. El diálogo sobre protegerse se incrementa entre la primera y la última relación coital. Su percepción del riesgo de adquirir ETS/SIDA es baja y se protegen sólo con parejas "desconocidas".The purpose of this study was to identify men's co-responsibility in the negotiation process of dual protection, according gender, in their first and most recent sexual relationships, and their perception of the risk of STD/AIDS. We surveyed 750 males from 19 to 29 years of age in 2,250 randomly selected households in metropolitan Lima, Peru. The majority mentioned condoms as a contraceptive technique (95%. Their first sexual relationships occurred with a female friend, with a stable partner, or with a known woman. Almost half used some type of protection, principally condoms in order to avoid pregnancy, but their consistent and correct use was low. For 39.5%, the most recent sexual relationship was with a stable partner, a female friend or "known" woman, a wife, or a female co-resident. Dialogue about protection increased between the first and the most recent sexual relationships. The perception of risk of acquiring STD/AIDS was low, and they tended to use protection only with an "unknown

InAlN high electron mobility transistor Ti/Al/Ni/Au Ohmic contact optimisation assisted by in-situ high temperature transmission electron microscopy

International Nuclear Information System (INIS)

Smith, M. D.; Parbrook, P. J.; O'Mahony, D.; Conroy, M.; Schmidt, M.

2015-01-01

This paper correlates the micro-structural and electrical characteristics associated with annealing of metallic multi-layers typically used in the formation of Ohmic contacts to InAlN high electron mobility transistors. The multi-layers comprised Ti/Al/Ni/Au and were annealed via rapid thermal processing at temperatures up to 925 °C with electrical current-voltage analysis establishing the onset of Ohmic (linear IV) behaviour at 750–800 °C. In-situ temperature dependent transmission electron microscopy established that metallic diffusion and inter-mixing were initiated near a temperature of 500 °C. Around 800 °C, inter-diffusion of the metal and semiconductor (nitride) was observed, correlating with the onset of Ohmic electrical behaviour. The sheet resistance associated with the InAlN/AlN/GaN interface is highly sensitive to the anneal temperature, with the range depending on the Ti layer thickness. The relationship between contact resistivity and measurement temperature follow that predicted by thermionic field emission for contacts annealed below 850 °C, but deviated above this due to excessive metal-semiconductor inter-diffusion

Intimal hyperplasia and wall shear in arterial bypass graft distal anastomoses: an in vivo model study.

Science.gov (United States)

Keynton, R S; Evancho, M M; Sims, R L; Rodway, N V; Gobin, A; Rittgers, S E

2001-10-01

The observation of intimal hyperplasia at bypass graft anastomoses has suggested a potential interaction between local hemodynamics and vascular wall response. Wall shear has been particularly implicated because of its known effects upon the endothelium of normal vessels and, thus, was examined as to its possible role in the development of intimal hyperplasia in arterial bypass graft distal anastomoses. Tapered (4-7 mm I.D.) e-PTFE synthetic grafts 6 cm long were placed as bilateral carotid artery bypasses in six adult, mongrel dogs weighing between 25 and 30 kg with distal anastomotic graft-to-artery diameter ratios (DR) of either 1.0 or 1.5. Immediately following implantation, simultaneous axial velocity measurements were made in the toe and artery floor regions in the plane of the anastomosis at radial increments of 0.35 mm, 0.70 mm, and 1.05 mm using a specially designed 20 MHz triple crystal ultrasonic wall shear rate transducer Mean, peak, and pulse amplitude wall shear rates (WSRs), their absolute values, the spatial and temporal wall shear stress gradients (WSSG), and the oscillatory shear index (OSI) were computed from these velocity measurements. All grafts were harvested after 12 weeks implantation and measurements of the degree of intimal hyperplasia (IH) were made along the toe region and the artery floor of the host artery in 1 mm increments. While some IH occurred along the toe region (8.35+/-23.1 microm) and was significantly different between DR groups (p<0.003), the greatest amount occurred along the artery floor (81.6+/-106.5 microm, mean +/- S.D.) (p < 0.001) although no significant differences were found between DR groups. Linear regressions were performed on the paired IH and mean, peak, and pulse amplitude WSR data as well as the absolute mean, peak, and pulse amplitude WSR data from all grafts. The mean and absolute mean WSRs showed a modest correlation with IH (r = -0.406 and -0.370, respectively) with further improvements seen (r = -0

Development of a field-suitable test method to evaluate the danger of hydrogen embrittlement due to hydrochloric acid pickling bathes and comparison of the effectiveness of pickling inhibitors; Entwicklung eines praxisgeeigneten Pruefverfahrens zur Bewertung des Wasserstoffgefaehrdungspotenzials von Salzsaeurebeizen und zum Vergleich der Wirksamkeit von Inhibitoren

Energy Technology Data Exchange (ETDEWEB)

Schroeder-Rentrop, I.; Landgrebe, R.; Berger, C.; Hasselmann, U. [Institut fuer Werkstoffkunde, Staatliche Materialpruefungsanstalt Darmstadt, TU Darmstadt, Grafenstrasse 2, 64283 Darmstadt (Germany)

2005-11-01

Qualitaetssicherung beherrschbarer zu machen und moeglichst zu verbessern. Es wurde ein praxistaugliches Versuchsverfahren zur Prozessueberwachung inhibierter Beizen entwickelt. Bei dem Verfahren handelt es sich um einen Verspannversuch, der an Wellensicherungsringen (WSR) nach DIN 471 in einer hierfuer entwickelten Aufweitvorrichtung durchgefuehrt wird. Die Indikationssicherheit des Versuchsverfahrens wurde durch den Vergleich der Ergebnisse des Verspannversuches mit WSR mit den Ergebnissen aus anderen Untersuchungsverfahren, die mit den gleichen Salzsaeurebeizen erzielt wurden, belegt. Die ''Wiederholpraezision'' des Verspannversuches mit Wellensicherungsringen wurde durch uebereinstimmende Ergebnisse, die mit WSR aus unterschiedlichen Fertigungslosen und Waermebehandlungslosen erzielt wurden, belegt. Die Verspannversuche mit WSR eignen sich als praxistaugliches Pruefverfahren und zeichnen sich darueber hinaus durch einen geringen zeitlichen und materiellen Pruefaufwand, eine einfache Handhabung sowie einen robusten und fehlertoleranten Versuchsaufbau aus. Das im Rahmen des Projektes entwickelte, aus verschiedenen Versuchsfuehrungen bestehende Untersuchungsprogramm, ermoeglicht darueber hinaus die umfassende Bewertung geeigneter Inhibitoren fuer die Beizvorbehandlung hochfester vergueteter Verbindungselemente. (Abstract Copyright [2005], Wiley Periodicals, Inc.)

Perfil de clientes submetidos a amputações relacionadas ao diabetes mellitus Perfíl del paciente sometido a la amputación relacionada a el diabestes mellitus Profile of patients submitted to amputation related to diabetes mellitus

Directory of Open Access Journals (Sweden)

Darlene Mara dos Santos Tavares

2009-12-01

Full Text Available Estudo retrospectivo que objetivou descrever as características sócio-demográficas e clínicas de 141 sujeitos, internados no Hospital de Clínicas da Universidade Federal do Triângulo Mineiro, submetidos à amputação relacionada ao diabetes; comparar o número de amputações de acordo com as variáveis sexo, faixa etária, co-morbidades e tipo de tratamento e associar o número de amputações com o tempo de internação e de diagnóstico. Os dados coletados em prontuários totalizaram 208 amputações. Maior percentual de sujeitos do sexo masculino (58,9% e maior ocorrência de amputação entre os idosos (70,2%; principal causa de internação: pé diabético (35,7%; a maioria (75,0% foi internada até duas vezes; co-morbidade mais freqüente: hipertensão arterial (74,0%; a mediana do número de amputações foi duas. Não foi observada diferença significativa entre as variáveis estudadas.Estudio retrospectivo que tuvo como objetivo describir las características sociodemográficas y las clínicas de 141 individuos internados en el Hospital de Clínicas de la Universidade Federal do Triângulo Mineiro, Uberaba, MG, Brasil, sometidos a amputaciones relacionadas con diabetes y comparar el número de amputaciones a partir de las variables sexo, edad, comorbilidad y tipo de tratamiento, así como asociar el número de amputaciones con el tiempo de internación y de diagnóstico. Los datos fueron recolectados en las fichas médicas, totalizando 208 amputaciones. Quedó comprobado un mayor porcentual de pacientes del sexo masculino (58,9% y una mayor incidencia de amputaciones entre los ancianos (70,2%; el principal causa de internación fue: pie diabético (35,7%; la mayoría (75,0% fue internado dos veces; comorbilidad más frecuente: hipertensión arterial (74,0%; promedio de amputaciones fue dos. No fueron observadas diferencias significativas entre las variables estudiadas.Retrospective study that aimed at describing the clinic and

Tratamiento Quirúrgico de la Epilepsia Farmacorresistente. 20 años de experiencia de la Fundación Centro Colombiano de Epilepsia y Enfermedades Neurológicas.

Directory of Open Access Journals (Sweden)

Ginna de la Rosa-Manjarrez

2009-07-01

Full Text Available

Resumen

Propósito: Presentar nuestra experiencia y describir las características clínicas, los desafíos quirúrgicos y el resultado de la cirugía de las epilepsias en pacientes adultos y niños.

Método: Análisis retrospectivo de 552 cirugías de epilepsia realizadas en la Fundación Centro Colombiano de Epilepsia y Enfermedades Neurológicas entre 1989 y 2008, de un total de 750 cirugías.

Resultados: Desde 1989 hasta 2009 se han realizado 750 cirugías de epilepsia. 552 pacientes, cumplían con todos los criterios de la inclusión para el estudio en mención. Todas las resecciones quirúrgicas fueron realizadas por el mismo neurocirujano (JFF y todos los pacientes ingresaron al mismo protocolo. El control postoperatorio de las crisis tuvo un rango de 30% al 70% dependiendo del tipo de intervención quirúrgica. La morbilidad y la mortalidad estuvieron en el orden del 1%.

Conclusión: La evaluación de los pacientes con epilepsia medicamente intratable debe estar a cargo de un grupo de especialistas en epilepsia dentro de centro especializado en cirugía de epilepsia. No hay restricciones en la edad para la cirugía de la epilepsia, ni restricciones en relación al síndrome epiléptico y el tipo de intervención. El control de las crisis alcanza porcentajes de éxito hasta del 70% en los pacientes postquirúrgicos, sin embargo es variable si la meta de la cirugía es paliativa o curativa. La rehabilitación es fundamental para la calidad de vida de estos pacientes. Nuestra experiencia fortalece la continuidad de los programas de cirugía de epilepsia.

Palabras clave: Epilepsia, cirugía.

Summary

Object: To present the experience of a center in epilepsy surgery and to describe the clinical characteristics, surgical challenges, and outcome in epilepsy surgery.

Methods: Retrospective analysis of