Empirical investigation of energy efficiency barriers in Italian manufacturing SMEs

International Nuclear Information System (INIS)

Trianni, Andrea; Cagno, Enrico; Worrell, Ernst; Pugliese, Giacomo

2013-01-01

The paper identifies and evaluates barriers to industrial energy efficiency through the investigation of 48 manufacturing Small and Medium-sized Enterprises (SMEs) in Northern Italy. The research provides interesting suggestions both for enterprises and energy policy-makers. Firstly, economic and information barriers are perceived as the major obstacles to the adoption of energy-efficient technologies, whilst behavioural barriers do not seem to affect enterprises very much. Nonetheless, despite what declared, the most relevant barriers are the lack of interest in energy efficiency and the existence of other priorities, thus showing that decision-makers tend to downgrade energy efficiency to a marginal issue. Furthermore, perceived barriers do not take place exclusively in implementing energy-efficient technologies, but, with comparable importance, also in generating the interest and knowledge of the opportunities. Moreover, the study highlights that relevant differences can be appreciated for both perceived and real barriers even among SMEs, that thus should not be bundled together. In addition to that, other factors affect barriers, stimulating future research: indeed, lower real barriers can be observed with higher complexity of the production, high variability of the demand and strong competitors. -- Highlights: ► Evidence of existing misalignments between perceived and real barriers to the adoption of energy-efficient technologies. ► Relevance of barriers to the generation of interest towards energy efficiency. ► Evidence of firm's size (within SMEs) and energy expenditures on barriers to energy efficiency. ► Importance, for energy efficiency barriers, of avoid bundling SMEs as a whole. ► Preliminary evidence of factors related to supply chain complexity affecting barriers to energy efficiency.

Building energy efficiency for public hospitals and healthcare facilities in China: Barriers and drivers

International Nuclear Information System (INIS)

Wang, Tao; Li, Xiaodong; Liao, Pin-Chao; Fang, Dongping

2016-01-01

Maximizing energy efficiency within HHFs (hospitals and healthcare facilities) is a major challenge in the field of energy conservation. This paper studies the key barriers to the implementation of energy-efficient technologies in China's public HHFs. For this purpose, a preliminary survey was conducted at the Beijing Municipal Health Bureau in order to assess the energy conservation efforts being made at 20 public HHFs. In the survey, a list of specific barriers to energy efficiency was created and HHF staffs were asked to rank these barriers in the order of importance. The results show that the economic incentives, appropriate technology, as well as enforceable laws and regulations are insufficiently supported by the government, have become the most significant obstacles to the improvement of energy efficiency. To remedy this, policymakers should take a multipronged approach which addresses the hospitals, projects, and technical and operating procedures in order to encourage the full participation and support of all stakeholders involved. Specifically, the government should offer multilevel economic incentives and reward policies; establish practical mandatory targets for building energy efficiency; provide demonstrable best practices in terms of the project, techniques, and operating procedures; and promote awareness of the importance of property risk management. - Highlights: • We developed a checklist of building energy efficiency barriers of HHFs in China. • We took a survey to prioritize the barriers by the staff from 20 public HHFs. • Policy makers should provide multiple-level solutions to all the stakeholders. • Economic incentives, mandatory target, technique supports are critical drivers.

Market and policy barriers to energy storage deployment :

Energy Technology Data Exchange (ETDEWEB)

Bhatnagar, Dhruv; Currier, Aileen B.; Hernandez, Jacquelynne; Ma, Ookie; Kirby, Brendan

2013-09-01

Electric energy storage technologies have recently been in the spotlight, discussed as essential grid assets that can provide services to increase the reliability and resiliency of the grid, including furthering the integration of variable renewable energy resources. Though they can provide numerous grid services, there are a number of factors that restrict their current deployment. The most significant barrier to deployment is high capital costs, though several recent deployments indicate that capital costs are decreasing and energy storage may be the preferred economic alternative in certain situations. However, a number of other market and regulatory barriers persist, limiting further deployment. These barriers can be categorized into regulatory barriers, market (economic) barriers, utility and developer business model barriers, crosscutting barriers and technology barriers. This report, through interviews with stakeholders and review of regulatory filings in four regions roughly representative of the United States, identifies the key barriers restricting further energy storage development in the country. The report also includes a discussion of possible solutions to address these barriers and a review of initiatives around the country at the federal, regional and state levels that are addressing some of these issues. Energy storage could have a key role to play in the future grid, but market and regulatory issues have to be addressed to allow storage resources open market access and compensation for the services they are capable of providing. Progress has been made in this effort, but much remains to be done and will require continued engagement from regulators, policy makers, market operators, utilities, developers and manufacturers.

Highway renewable energy : photovoltaic noise barriers

Science.gov (United States)

2017-07-01

Highway photovoltaic noise barriers (PVNBs) represent the combination of noise barrier systems and photovoltaic systems in order to mitigate traffic noise while simultaneously producing renewable energy. First deployed in Switzerland in 1989, PVNBs a...

Barriers to renewable energy development: A case study of large-scale wind energy in Saskatchewan, Canada

International Nuclear Information System (INIS)

Richards, Garrett; Noble, Bram; Belcher, Ken

2012-01-01

Renewable energy is receiving increased attention as a viable alternative to non-renewable electrical generation, however, meeting global energy demands will require a more ambitious renewable energy program than is currently the case. There have been several reviews of potential technological, economic, social, or public barriers and solutions to renewable energy investment. Although important, there is also need for multi-dimensional analyses of these barriers and identification of the most significant underlying barriers if viable solutions are to be developed. In this paper we apply a theoretical framework to examine stakeholder's perceptions and understanding of the barriers to wind energy development in Saskatchewan, Canada. We identify and examine the most significant underlying barriers to investment in renewable energy and the interactions between those barriers. Results show a number of perceived barriers to wind energy investment, however, these barriers can be explained in large part by knowledge barriers, if not disagreement over whether the current level of investment in wind energy is sufficient. We show that barriers to renewable energy cannot be explained solely by technological, social, political, or economic factors in isolation, and that a multi-dimensional approach, identifying and explaining the underlying sources of these barriers, is necessary to develop viable solutions. - Highlights: ► Meeting future wind energy objectives requires an ambitious investment program. ► A framework is applied to identify and explain perceived barriers to wind energy. ► Stakeholders perceived technological and political barriers as the most significant. ► These could be explained by knowledge barriers and complacency with the status quo. ► Even with additional investment these underlying barriers will constrain progress.

Containment analysis of the 9975 transportation package with multiple barriers

International Nuclear Information System (INIS)

Vinson, D.W.

2000-01-01

A containment analysis has been performed for the scenario of non-routine transfer of a damaged 9975 package containing plutonium metal from K-area monitored storage to F-area on the Savannah River Site. A multiple barrier system with each barrier having a defined leakage rate of less than 1times10 -3 cm 3 /sec of air at Standard Temperature and Pressure was analyzed to determine the number of barriers needed to transport the package under normal transportation conditions to meet transportation requirements for containment. The barrier system was analyzed parametrically to achieve a composite system that met the federal requirements for the maximum permissible release rate given in Title 10 of the Code of Federal Regulations, Part 71. The multiple barrier system acts to retard the release of radioactivity. That is, a build-up in the radioactivity release rate occurs with time. For example, a system with three barriers (e.g., sealed plastic barrier) with a total free volume of 4,500 cm 3 could be transported for a total time of up to approximately 10 days with a release rate within the permissible rate. Additional number of barriers, or volume of the barriers, or both, would extend to this period of time. For example, a system with seven barriers with a total free volume of 4,500 cm 3 could be transported for up to 100 days. Plastic bags are one type of barrier used in movement of radioactive materials and capable of achieving a leak rate of 1times10 -3 cm 3 /sec of air at STP. Low-density polyethylene bags can withstand high temperature (up to 180 degrees C); a barrier thickness of 10 mils should be suitable for the barrier system. Additional requirements for barriers are listed in Section 4.2 of this report. Container testing per ANSI N14.5 is required to demonstrate leak rates for the individual barriers of less than 1times10 -3 cm 3 /sec

Overcoming energy efficiency barriers through systems approach—A conceptual framework

International Nuclear Information System (INIS)

Chai, Kah-Hin; Yeo, Catrina

2012-01-01

In this paper we propose a framework which categorizes energy efficiency barriers based on the stage at which the barriers exist. Barriers to energy efficiency have been widely studied but to our knowledge, except for a few studies, we found inadequate consideration for barrier–barrier interactions when proposing policy measures for improving energy efficiency. Leveraging systems thinking's power as a problem solver which identifies underlying structure that explains (similar) patterns of behavior in a variety of different situations, we attempted to identify patterns of barriers to adoption of energy efficiency measures in industrial companies. Inspired by systems thinking, the proposed framework has four stages, namely, Motivation, Capability, Implementation and Results, as well as a feedback loop. Using a case study, we show that following the four stages will lead to positive feedback for future energy efficiency implementations. The framework highlights the interconnected nature of the barriers and a need for policymakers to address these barriers in a holistic manner. We argue that the overall effectiveness of energy efficiency policies is only as strong as the weakest link in the four-stage framework. This differs from most prior research that addressed barriers in isolation, where a solution is proposed for each of the barriers without considering the relationship between the barriers. Our framework also offers a way to understand the roles and responsibilities of major stakeholders such as governments and energy service companies (ESCOs) in driving energy efficiency. This allows the assessment and identification of weak links in energy efficiency policies. - Highlights: ► We propose a systems approach to overcome energy efficiency barriers. ► Barriers are grouped into Motivation, Capability, Implementation and Results. ► Case study shows that there is a feedback loop from Results to Motivation. ► Current Results will affect future Motivation. �

Parametric modeling of energy filtering by energy barriers in thermoelectric nanocomposites

Energy Technology Data Exchange (ETDEWEB)

Zianni, Xanthippi, E-mail: xzianni@teiste.gr, E-mail: xzianni@gmail.com [Department of Aircraft Technology, Technological Educational Institution of Sterea Ellada, 34400 Psachna (Greece); Department of Microelectronics, INN, NCSR “Demokritos,” 15310 Athens (Greece); Narducci, Dario [Department of Materials Science, University of Milano Bicocca, 20125 Milano (Italy)

2015-01-21

We present a parametric modeling of the thermoelectric transport coefficients based on a model previously used to interpret experimental measurements on the conductivity, σ, and Seebeck coefficient, S, in highly Boron-doped polycrystalline Si, where a very significant thermoelectric power factor (TPF) enhancement was observed. We have derived analytical formalism for the transport coefficients in the presence of an energy barrier assuming thermionic emission over the barrier for (i) non-degenerate and (ii) degenerate one-band semiconductor. Simple generic parametric equations are found that are in agreement with the exact Boltzmann transport formalism in a wide range of parameters. Moreover, we explore the effect of energy barriers in 1-d composite semiconductors in the presence of two phases: (a) the bulk-like phase and (b) the barrier phase. It is pointed out that significant TPF enhancement can be achieved in the composite structure of two phases with different thermal conductivities. The TPF enhancement is estimated as a function of temperature, the Fermi energy position, the type of scattering, and the barrier height. The derived modeling provides guidance for experiments and device design.

Energy analysis of vehicle-to-cable barrier impacts.

Science.gov (United States)

2013-06-01

An accident reconstruction technique was developed for estimating the energy absorbed during an impact with a cable barrier system as well as the initial impact velocity. The kinetic energy absorbed during a cable barrier system impact is comprised o...

A Multiple Indicators Multiple Causes (MIMIC) model of internal barriers to drug treatment in China.

Science.gov (United States)

Qi, Chang; Kelly, Brian C; Liao, Yanhui; He, Haoyu; Luo, Tao; Deng, Huiqiong; Liu, Tieqiao; Hao, Wei; Wang, Jichuan

2015-03-01

Although evidence exists for distinct barriers to drug abuse treatment (BDATs), investigations of their inter-relationships and the effect of individual characteristics on the barrier factors have been sparse, especially in China. A Multiple Indicators Multiple Causes (MIMIC) model is applied for this target. A sample of 262 drug users were recruited from three drug rehabilitation centers in Hunan Province, China. We applied a MIMIC approach to investigate the effect of gender, age, marital status, education, primary substance use, duration of primary drug use, and drug treatment experience on the internal barrier factors: absence of problem (AP), negative social support (NSS), fear of treatment (FT), and privacy concerns (PC). Drug users of various characteristics were found to report different internal barrier factors. Younger participants were more likely to report NSS (-0.19, p=0.038) and PC (-0.31, p<0.001). Compared to other drug users, ice users were more likely to report AP (0.44, p<0.001) and NSS (0.25, p=0.010). Drug treatment experiences related to AP (0.20, p=0.012). In addition, differential item functioning (DIF) occurred in three items when participant from groups with different duration of drug use, ice use, or marital status. Individual characteristics had significant effects on internal barriers to drug treatment. On this basis, BDAT perceived by different individuals could be assessed before tactics were utilized to successfully remove perceived barriers to drug treatment. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Nontechnical Barriers to Solar Energy Use: Review of Recent Literature

Energy Technology Data Exchange (ETDEWEB)

Margolis, R.; Zuboy, J.

2006-09-01

This paper reviews the nontechnical barriers to solar energy use, drawing on recent literature to help identify key barriers that must be addressed as part of the Technology Acceptance efforts under the U.S. Department of Energy (DOE) Solar America Initiative. A broad literature search yielded more than 400 references, which were narrowed to 19 recent documents on nontechnical barriers to the use of solar energy and other energy efficiency and renewable energy (EE/RE) technologies. Some of the most frequently identified barriers included lack of government policy supporting EE/RE, lack of information dissemination and consumer awareness about energy and EE/RE, high cost of solar and other EE/RE technologies compared with conventional energy, and inadequate financing options for EE/RE projects.

Permeability of the blood-brain barrier predicts conversion from optic neuritis to multiple sclerosis

DEFF Research Database (Denmark)

Cramer, Stig P; Modvig, Signe; Simonsen, Helle Juhl

2015-01-01

in the permeability of the blood-brain barrier in normal-appearing white matter of patients with multiple sclerosis and here, for the first time, we present a study on the capability of blood-brain barrier permeability in predicting conversion from optic neuritis to multiple sclerosis and a direct comparison...... with cerebrospinal fluid markers of inflammation, cellular trafficking and blood-brain barrier breakdown. To this end, we applied dynamic contrast-enhanced magnetic resonance imaging at 3 T to measure blood-brain barrier permeability in 39 patients with monosymptomatic optic neuritis, all referred for imaging...... fluid as well as levels of CXCL10 and MMP9 in the cerebrospinal fluid. These findings suggest that blood-brain barrier permeability, as measured by magnetic resonance imaging, may provide novel pathological information as a marker of neuroinflammation related to multiple sclerosis, to some extent...

Investing in Energy Efficiency. Removing the Barriers

International Nuclear Information System (INIS)

2004-01-01

Investing in improving energy efficiency has the clear advantages of reducing energy costs, improving security of supply and mitigating the environmental impacts of energy use. And still, many viable opportunities for higher energy efficiency are not tapped because of the existence of numerous barriers to such investments. These lost opportunities imply costs to the individual energy consumers and to the society as a whole and they are particularly important in economies in transition. This report identifies various types of barriers for making energy efficiency investments (be they of legal, administrative, institutional or financial nature), mainly in buildings, district heating and efficient lighting. The role of various bodies and organisations for the facilitation of energy efficiency investments is analysed, from public authorities and regulators to banks and international financing institutions

Reducing barriers to energy efficiency in the German energy service companies sector. Final report

Energy Technology Data Exchange (ETDEWEB)

Koewener, D.; Schleich, J.

2000-12-01

This report describes the empirical research conducted in the German energy service sector to assess to what extent energy service companies (ESCOs) can help overcome the barriers to energy in the higher education, brewing and mechanical engineering sectors. This report complements the sector for Germany within the BARRIERS project (Sorrell et al., 2000; Schleich/Boede 2000a; Schleich/Boede 2000b; Schleich et al., 2000). The report characterises the German energy service sector, contains a description and analysis of four case studies in the energy service sector, identifies the main barriers and chances for ESCOs in the higher education, brewery and mechanical engineering sectors, and concludes with brief recommendations on how these barriers may be overcome. The results of the study are summarised here under the following headings: Characterising the energy service sector in Germany; - Case studies of energy service companies in Germany; - The role of ESCOs in the case-study sectors; - Policy implications. (orig.)

Renewable energy costs, potentials, barriers: Conceptual issues

International Nuclear Information System (INIS)

Verbruggen, Aviel; Fischedick, Manfred; Moomaw, William; Weir, Tony; Nadai, Alain; Nilsson, Lars J.; Nyboer, John; Sathaye, Jayant

2010-01-01

Renewable energy can become the major energy supply option in low-carbon energy economies. Disruptive transformations in all energy systems are necessary for tapping widely available renewable energy resources. Organizing the energy transition from non-sustainable to renewable energy is often described as the major challenge of the first half of the 21st century. Technological innovation, the economy (costs and prices) and policies have to be aligned to achieve full renewable energy potentials, and barriers impeding that growth need to be removed. These issues are also covered by IPCC's special report on renewable energy and climate change to be completed in 2010. This article focuses on the interrelations among the drivers. It clarifies definitions of costs and prices, and of barriers. After reviewing how the third and fourth assessment reports of IPCC cover mitigation potentials and commenting on definitions of renewable energy potentials in the literature, we propose a consistent set of potentials of renewable energy supplies.

Barriers' and policies' analysis of China's building energy efficiency

International Nuclear Information System (INIS)

Zhang, Yurong; Wang, Yuanfeng

2013-01-01

With the rapid economic growth and the improvement of people's living standards, China's building energy consumption has kept rising during the past 15 years. Under the effort of the Chinese government and the society, China's building energy efficiency has made certain achievements. However, the implementation of building energy efficiency in China is still far from its potential. Based on the analysis of the existing policies implemented in China, the article concluded that the most essential and the most effective ways to promote building energy efficiency is the government's involvement as well as economic and financial incentives. In addition, the main barriers in the process of promoting building energy efficiency in China are identified in six aspects. It has been found that the legal system and administrative issues constitute major barriers, and the lack of financial incentives and the mismatching of market mechanism also hamper the promotion of building energy efficiency. Finally, in view of the existing policies and barriers analysis, three corresponding policy proposals are presented. -- Highlights: •The existing policies implemented in China from three aspects are presented and analysed. •The Government's involvement is the most essential effective way to promote building-energy efficiency. •Six aspects of barriers in promoting building energy efficiency in China are identified. •The legal system and administrative issues constitute the major barriers. •Three policy proposals to further promote building energy efficiency in China are proposed

Energy management action plan: Developing a strategy for overcoming institutional barriers to municipal energy conservation

Energy Technology Data Exchange (ETDEWEB)

1992-12-31

Energy offices working to improve efficiency of local government facilities face not only technical tasks, but institutional barriers, such as budget structures that do not reward efficiency, a low awareness of energy issues, and purchasing procedures based only on minimizing initial cost. The bureau, in working to remove such barriers in San Francisco, has identified 37 institutional barriers in areas such as operations & maintenance, purchasing, and facility design; these barriers were then reorganized into three groupings-- policy & attitudes, budget & incentives, and awareness & information-- and mapped. This map shows that the barriers mutually reinforce each other, and that a holistic approach is required for permanent change. The city`s recreation & parks department was used as a model department, and information about facility energy use was compiled into a departmental energy review. Staff interviews showed how barriers affect conservation. The bureau then generated ideas for projects to remove specific barriers and rated them according to potential impact and the resources required to implement them. Four of the six projects selected focused on maintenance staff: a cost- sharing lighting retrofit program, a boiler efficiency program, a departmental energy tracking system, and a budgetary incentive program for conservation. The other two projects are city-wide: promotion of a new term contract supplying energy-efficient light materials, and publication/distribution of ENERGY NEWS newsletter. A general methodology, the EMAP Strategy Guide, has been created to assist other energy offices in developing EMAPs.

Analysis of interactions among the barriers to energy saving in China

International Nuclear Information System (INIS)

Wang Guohong; Wang Yunxia; Zhao Tao

2008-01-01

Since China became the second largest energy consumer and carbon dioxide emitter, the problem of energy consumption and environmental pollution has drawn the world's attention. Meanwhile, Chinese government has put high emphasis on the problem. One project of energy saving initiated by Chinese government has been put into practice. However, many difficulties need to be dealt with to meet the expected aim of social development. The objective of this article is to investigate the interactions among the major barriers which prevent the practice of energy saving in China. Obviously, a clear definition of relationships among the barriers to energy saving helps top leaders make relevant decisions to solve the problem of economic sustainability, energy security and environment pollution in the future. To date, studies specifying energy-saving barriers have often focused on analyzing these barriers separately. As a result, a holistic view in understanding the barriers to energy-saving project is lacking. Interpretive structural modeling (ISM) is utilized to summarize the critical barriers hindering the project of energy saving in China and to explain the interrelationships among them. Suggestions for energy-saving practice and future research are provided

Fusion of 6Li with 159Tb at near-barrier energies

International Nuclear Information System (INIS)

Pradhan, M. K.; Mukherjee, A.; Basu, P.; Goswami, A.; Kshetri, R.; Roy, Subinit; Chowdhury, P. Roy; Sarkar, M. Saha; Palit, R.; Parkar, V. V.; Santra, S.; Ray, M.

2011-01-01

Complete and incomplete fusion cross sections for 6 Li + 159 Tb have been measured at energies around the Coulomb barrier by the γ-ray method. The measurements show that the complete fusion cross sections at above-barrier energies are suppressed by ∼34% compared to coupled-channel calculations. A comparison of the complete fusion cross sections at above-barrier energies with the existing data for 11,10 B + 159 Tb and 7 Li + 159 Tb shows that the extent of suppression is correlated with the α separation energies of the projectiles. It has been argued that the Dy isotopes produced in the reaction 6 Li + 159 Tb at below-barrier energies are primarily due to the d transfer to unbound states of 159 Tb, while both transfer and incomplete fusion processes contribute at above-barrier energies.

The effects of temperature on Schottky diode barrier height and evidence of multiple barrier

International Nuclear Information System (INIS)

Rabah, K.V.O.

1994-07-01

Experimental study of Capacitance-Voltage-Temperature (C-V-T) plots, Current-Voltage-Temperature (I-V-T) characteristics have been undertaken in order to determine the height of the Schottky barrier. The results of the barrier height obtained by the above two methods were found to differ as well as vary with temperature change. In view of this discrepancy in barrier height values, two further experiments were performed: one on activation energy (I-T) plots and the other on pulsed (I-V-T) characteristics, and the results were found to show a similar trend. The Schottky diode studied was a 30CP040. (author). 23 refs, 9 figs, 3 tabs

Sustainability and energy self-sufficiency; overcoming the barriers

Directory of Open Access Journals (Sweden)

Rania Abdel Galil

2015-12-01

the struggle on the micro level in Europe and on the macro level in MENA.On a political level, renewable energy policies in Europe are criticized as being uncoordinated, unstrategised and based on multiple interests, generally favouring macro level and inadequate to stimulate widespread adoption at the micro level. Similarly, in the MENA region, there is a lack of coordination between sustainable energy policies with other policy fields, namely economic, financial, environmental and social policy, with a lack of expertise in renewable energy policies and supportive policies for private investment. On an economic level, in Europe, sourcing and accessing finance is a major barrier for communities, with a lack appropriate organizational structures, the volatility of grant regimes and uncertain infrastructural costs perhaps associated with the near monopolistic position of some grid companies. Whereas in the MENA region, there are no incentives for economical use of energy, there is a lack of funding in public utilities in most countries, the investment climate is less attractive and a monopoly position of most electricity producers exists.Technically, on a national level in Europe, a problem of the incompatibility of the new technologies with the current infrastructure (grid connection and capacity are often identified as barriers, whilst on a community level, the lack of data on the efficiency of techniques, lack of technical skills and experience  to implement renewable energy solutions act as barriers. In MENA, technologies involving the use of renewables have barely become established on the market and there is a significant lack of knowledge in the areas of technology transfer, marketing and the development of services within the energy sector. Finally, on a social level, the picture in the MENA region is bleaker. In Europe, governments and communities are well aware of the challenges laying ahead in terms of energy and some are well underway in achieving targets

Barriers to renewable energy penetration. A framework for analysis

DEFF Research Database (Denmark)

Painuly, Jyoti P.

2001-01-01

Renewable energy has the potential to play an important role in providing energy with sustainability to the vast populations in developing countries who as yet have no access to clean energy. Although economically viable fur several applications, renewable energy has not been able to realise its...... potential due to several barriers to its penetration. A framework has been developed in this paper to identify the barriers to renewable energy penetration acid to suggest measures to overcome them. (C) 2001 Elsevier Science Ltd. All rights reserved....

7Li breakup polarization potential at near barrier energies

International Nuclear Information System (INIS)

Lubian, J. . E-mail lubian@if.uff.br; Correa, T.; Paes, B.; Figueira, J.M.; Abriola, D.; Fernandez Niello, J.O.; Arazi, A.; Capurro, O.A.; de Barbara, E.; Marti, G.V.; Martinez Heinmann, D.; Negri, A.E.; Pacheco, A.J.; Padron, I.; Gomes, P.R.S.

2007-01-01

Inelastic and one neutron transfer cross sections at energies around the Coulomb barrier were used to derive dynamic polarization potential (DPP) for the 7 Li + 27 Al system. The DPP due to breakup, obtained in a simple way, indicates that its real part is repulsive at near barrier energies

Barriers to and drivers for energy efficiency in the Swedish foundry industry

International Nuclear Information System (INIS)

Rohdin, Patrik; Thollander, Patrik; Solding, Petter

2007-01-01

Despite the need for increased industrial energy efficiency, studies indicate that cost-efficient energy conservation measures are not always implemented, explained by the existence of barriers to energy efficiency. This paper investigates the existence of different barriers to and driving forces for the implementation of energy efficiency measures in the energy intensive Swedish foundry industry. The overall results from a questionnaire show that limited access to capital constitutes by far the largest barrier to energy efficiency according to the respondents. A comparison between group-owned and privately owned foundries shows that, except for limited access to capital, they face different high-ranked barriers. While barriers within group owned companies are more related to organizational problems, barriers within private foundries are more related to information problems. This study also found that energy consultants or other actors working with energy issues in foundries are of major importance in overcoming the largest barriers, as the foundries consider them trustworthy. They may thus help the foundries overcome organizational problems such as lack of sub-metering and lack of budget funds by quantifying potential energy efficiency investments. The two, by far, most important drivers were found to be people with real ambition and long-term energy strategies

Energy barrier to decoherence

International Nuclear Information System (INIS)

Mizel, Ari; Mitchell, M. W.; Cohen, Marvin L.

2001-01-01

We propose a ground-state approach to realizing quantum computers. This scheme is time-independent and inherently defends against decoherence by possessing an energy barrier to excitation. We prove that our time-independent qubits can perform the same algorithms as their time-dependent counterparts. Advantages and disadvantages of the time-independent approach are described. A model involving quantum dots is provided for illustration

Linear and non-linear energy barriers in systems of interacting single-domain ferromagnetic particles

International Nuclear Information System (INIS)

Petrila, Iulian; Bodale, Ilie; Rotarescu, Cristian; Stancu, Alexandru

2011-01-01

A comparative analysis between linear and non-linear energy barriers used for modeling statistical thermally-excited ferromagnetic systems is presented. The linear energy barrier is obtained by new symmetry considerations about the anisotropy energy and the link with the non-linear energy barrier is also presented. For a relevant analysis we compare the effects of linear and non-linear energy barriers implemented in two different models: Preisach-Neel and Ising-Metropolis. The differences between energy barriers which are reflected in different coercive field dependence of the temperature are also presented. -- Highlights: → The linear energy barrier is obtained from symmetry considerations. → The linear and non-linear energy barriers are calibrated and implemented in Preisach-Neel and Ising-Metropolis models. → The temperature and time effects of the linear and non-linear energy barriers are analyzed.

Urban sound energy reduction by means of sound barriers

Science.gov (United States)

Iordache, Vlad; Ionita, Mihai Vlad

2018-02-01

In urban environment, various heating ventilation and air conditioning appliances designed to maintain indoor comfort become urban acoustic pollution vectors due to the sound energy produced by these equipment. The acoustic barriers are the recommended method for the sound energy reduction in urban environment. The current sizing method of these acoustic barriers is too difficult and it is not practical for any 3D location of the noisy equipment and reception point. In this study we will develop based on the same method a new simplified tool for acoustic barriers sizing, maintaining the same precision characteristic to the classical method. Abacuses for acoustic barriers sizing are built that can be used for different 3D locations of the source and the reception points, for several frequencies and several acoustic barrier heights. The study case presented in the article represents a confirmation for the rapidity and ease of use of these abacuses in the design of the acoustic barriers.

Urban sound energy reduction by means of sound barriers

Directory of Open Access Journals (Sweden)

Iordache Vlad

2018-01-01

Full Text Available In urban environment, various heating ventilation and air conditioning appliances designed to maintain indoor comfort become urban acoustic pollution vectors due to the sound energy produced by these equipment. The acoustic barriers are the recommended method for the sound energy reduction in urban environment. The current sizing method of these acoustic barriers is too difficult and it is not practical for any 3D location of the noisy equipment and reception point. In this study we will develop based on the same method a new simplified tool for acoustic barriers sizing, maintaining the same precision characteristic to the classical method. Abacuses for acoustic barriers sizing are built that can be used for different 3D locations of the source and the reception points, for several frequencies and several acoustic barrier heights. The study case presented in the article represents a confirmation for the rapidity and ease of use of these abacuses in the design of the acoustic barriers.

Reducing barriers to energy efficiency in the German brewing sector. Final report

Energy Technology Data Exchange (ETDEWEB)

Schleich, J; Boede, U; Ostertag, K; Radgen, P

2000-12-01

This report describes the empirical research into barriers to energy efficiency in the German brewing sector. It is one of nine such reports in the BARRIERS project. The report contains description and analysis of five case studies of energy management in German breweries. The results are analysed using the theoretical framework developed for the BARRIERS project. The report also provides brief recommendations on how these barriers to the rational use of energy (RUE) may be overcome and how energy efficiency within the brewing sector may be improved. The results of the study for the brewing sector in Germany are summarised in this executive summary under the following headings: - Characterising the brewing sector - Case studies of energy management in the German brewing sector; - Evidence of barriers in the German brewing sector; - The role of energy service companies in the brewing sector; - Policy implications. (orig.)

Reducing barriers to energy efficiency in the German brewing sector. Executive Summary

Energy Technology Data Exchange (ETDEWEB)

Schleich, J.; Boede, U.; Ostertag, K.; Radgen, P.

2000-12-01

This report describes the empirical research into barriers to energy efficiency in the German brewing sector. It is one of nine such reports in the BARRIERS project. The report contains description and analysis of five case studies of energy management in German breweries. The results are analysed using the theoretical framework developed for the BARRIERS project. The report also provides brief recommendations on how these barriers to the rational use of energy (RUE) may be overcome and how energy efficiency within the brewing sector may be improved. The results of the study for the brewing sector in Germany are summarised in this executive summary under the following headings: - Characterising the brewing sector; - Case studies of energy management in the German brewing sector; - Evidence of barriers in the German brewing sector; - The role of energy service companies in the brewing sector; - Policy implications. (orig.)

Barriers to Industrial Energy Efficiency - Study (Appendix A), June 2015

Energy Technology Data Exchange (ETDEWEB)

None

2015-06-01

This study examines barriers that impede the adoption of energy efficient technologies and practices in the industrial sector, and identifies successful examples and opportunities to overcome these barriers. Three groups of energy efficiency technologies and measures were examined: industrial end-use energy efficiency, industrial demand response, and industrial combined heat and power. This study also includes the estimated economic benefits from hypothetical Federal energy efficiency matching grants, as directed by the Act.

Barriers to Industrial Energy Efficiency - Report to Congress, June 2015

Energy Technology Data Exchange (ETDEWEB)

None

2015-06-01

This report examines barriers that impede the adoption of energy efficient technologies and practices in the industrial sector, and identifies successful examples and opportunities to overcome these barriers. Three groups of energy efficiency technologies and measures were examined: industrial end-use energy efficiency, industrial demand response, and industrial combined heat and power. This report also includes the estimated economic benefits from hypothetical Federal energy efficiency matching grants, as directed by the Act.

Final disposal in deep boreholes using multiple geological barriers. Digging deeper for safety. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Bracke, Guido; Hurst, Stephanie; Merkel, Broder; Mueller, Birgit; Schilling, Frank

2016-03-15

The proceedings of the workshop on final disposal in deep boreholes using multiple geological barriers - digging deeper for safety include contributions on the following topics: international status and safety requirements; geological and physical barriers; deep drilling - shaft building; technical barriers and emplacement technology for high P/T conditions; recovery (waste retrieval); geochemistry and monitoring.

Developing effective rockfall protection barriers for low energy impacts

Science.gov (United States)

Mentani, Alessio; Giacomini, Anna; Buzzi, Olivier; Govoni, Laura; Gottardi, Guido; Fityus, Stephen

2016-04-01

Recently, important progresses have been made towards the development of high capacity rockfall barriers (100 kJ - 8000 kJ). The interest of researchers and practitioners is now turning to the development of fences of minor capacity, whose use becomes essential in areas where rockfall events generally have low intensity and the use of high capacity barriers would be accompanied by excessive costs and high environmental impact. Low energy barriers can also provide a cost-effective solution even in areas where high energies events are expected. Results of full-scale tests are vital to any investigation on the behaviour of these structures. An experimental set-up has been developed at The University of Newcastle (AUS), to investigate the response of low energy rockfall barrier prototypes to low energy impacts. The Australian territory, and in particular New South Wales, is in fact characterised by rockfall events of low-to-medium intensity (50 kJ - 500 kJ) and the need of protection structures working within such energy range, is particularly felt [1]. The experiments involved the impact of a test block onto three spans, low energy barrier prototypes, made of steel structural posts, fully fixed at the base, side cables and a steel meshwork constituted by a double twist hexagonal wire net [2]. Test data enabled the development, calibration and assessment of FE models [3], on which non-linear and dynamic analyses have been performed addressing the effect of the block size. Results have shown that the response of the structure is strongly governed by the net. Data from tests conducted on the sole net and on the entire barrier showed in fact a similar trend, different to what typically observed for high capacity barriers, whose behaviour is also led by the presence of uphill cables and brakes. In particular, the numerical analyses have demonstrated a dependence of the net performance on the block size. In particular, a loss of capacity in the order of 50% occurred as the

Period multiplication and chaotic phenomena in atmospheric dielectric-barrier glow discharges

International Nuclear Information System (INIS)

Wang, Y. H.; Zhang, Y. T.; Wang, D. Z.; Kong, M. G.

2007-01-01

In this letter, evidence of temporal plasma nonlinearity in which atmospheric dielectric-barrier discharges undergo period multiplication and chaos using a one-dimensional fluid model is reported. Under the conditions conducive for chaotic states, several frequency windows are identified in which period multiplication and secondary bifurcations are observed. Such time-domain nonlinearity is important for controlling instabilities in atmospheric glow discharges

Dealing with barriers to energy efficiency and SMEs: Some empirical evidences

International Nuclear Information System (INIS)

Trianni, A.; Cagno, E.

2012-01-01

This paper aims at providing an identification and an analysis of the most relevant barriers to energy efficiency that limit a widespread implementation of the Best Available Technologies and Practices (BAT/Ps) through the investigation of 128 non-energy intensive manufacturing Small and Medium-sized Enterprises (SMEs) in Northern Italy. The study, starting from the existing literature, performs an investigation of the operational difficulties occurring when it has been decided to undertake the process of investing resources in energy efficiency interventions. The most perceived barriers have been analyzed with respect to several important characteristics (among others, sector and firm’s size). This examination shows also that very much attention should be paid to avoid bundling together SMEs of different sizes and sectors, since different behaviors with respect to the perception of the barriers can be observed. The analysis of the sample presents some interesting trends considering the perception of the barriers with respect to previous experience of the enterprises on energy efficiency. The paper also explores, through a preliminary analysis, the correlations among questions in order to understand the dynamics and the possible effects of a given barrier with respect to others. Several suggestions for future research in this important area have been provided. -- Highlights: ► Evidences of different behaviors with respect to energy efficiency among sectors and firm’s size (within SMEs). ► Importance, for energy efficiency barriers, of avoid bundling SMEs as a whole. ► Preliminary investigation of relationships between barriers in order to understand the dynamics.

Energy efficiency barriers in commercial and industrial firms in Ukraine: An empirical analysis

International Nuclear Information System (INIS)

Hochman, Gal; Timilsina, Govinda R.

2017-01-01

Improvement in energy efficiency is one of the main options to reduce energy demand and greenhouse gas emissions. However, large-scale deployment of energy-efficient technologies is constrained by several factors. Employing a survey of 509 industrial and commercial firms throughout Ukraine and a generalized ordered logit model, we quantified the economic, behavioral, and institutional barriers that may impede the deployment of energy-efficient technologies. Our analysis shows that behavioral barriers resulted from lack of information, knowledge, and awareness are major impediments to the adoption of energy-efficient technologies in Ukraine, and that financial barriers may further impede investments in these technologies especially for small firms. This suggests that carefully targeted information provisions and energy audits will enhance Ukrainian firms' investments in energy-efficient technologies to save energy consumption, improve productivity, and reduce carbon emissions from the productive sectors. - Highlights: • Employing a survey of 509 industrial and commercial firms throughout Ukraine • A generalized ordered logit model is used in the analysis. • The paper quantifies the economic, behavioral, and institutional barriers to energy-efficient technologies. • Behavioral barriers are major impediments to the adoption of energy-efficient technologies. • Financial barriers may further impede investments in these technologies especially for small firms.

A path method for finding energy barriers and minimum energy paths in complex micromagnetic systems

International Nuclear Information System (INIS)

Dittrich, R.; Schrefl, T.; Suess, D.; Scholz, W.; Forster, H.; Fidler, J.

2002-01-01

Minimum energy paths and energy barriers are calculated for complex micromagnetic systems. The method is based on the nudged elastic band method and uses finite-element techniques to represent granular structures. The method was found to be robust and fast for both simple test problems as well as for large systems such as patterned granular media. The method is used to estimate the energy barriers in CoCr-based perpendicular recording media

Implementation of renewable energy technologies - Opportunities and barriers. Ghana country study

Energy Technology Data Exchange (ETDEWEB)

Edjekumhene, I.; Atakora, S.B.; Atta-Konadu, R.; Brew-Hammond, A. [Kumasi Inst. og Technology and Environment (Ghana)

2001-07-01

This report presents the experience of Ghana in the development, utilisation and promotion of Renewable Energy Technologies (RETs). The report gives a general overview of the state of RETs, describes past/existing institutional, regulatory and policy framework, identifies key barriers to and opportunities for RETs, and recommends directional changes needed to remove barriers and promote wide-scale adoption of RETs in Ghana. A total of eight RETs - biomass-fired dryers, sawdust stoves, sawdust briquette, biogas, solar crop dryer, solar water heater, solar water pump and small hydro power - are covered in the report. Analyses of barriers to the eight RETs are carried out using a framework approach that categorises barriers into socio-technical, economic and crosscutting barriers. Financial analyses, as opposed to economic analyses, have been carried out for all the selected RETs. The report also incorporates stake holders' perspectives and views on barriers and how they can be removed. Ghana is endowed with several renewable energy resources like solar radiation, small hydro, biomass, and wind. Exploitation of Ghana's renewable energy resources has been carried out under two main policy regimes - PND Law 62 (1983) and the Energy Sector Development Programme (ESDP). Several measures and instruments have been employed in the implementation of renewable energy policies. The main measures used are research and development, information and eduction, and some normative measures (like the passing of PNDC Law 62 and the Energy Commission Law). Some economic instruments, such as subsidies, taxes, pricing, financing and duty waiver/reduction, have been used as well but only to a limited extent. The effective development, implementation and dissemination of all the RETs studied are hampered by several barriers, which can be grouped into three main categories - Socio-technical barriers, economic barriers and crosscutting barriers. Socio-technical barriers refer to

Implementation of renewable energy technologies - Opportunities and barriers. Ghana country study

Energy Technology Data Exchange (ETDEWEB)

Edjekumhene, I; Atakora, S B; Atta-Konadu, R; Brew-Hammond, A [Kumasi Inst. og Technology and Environment (Ghana)

2001-07-01

This report presents the experience of Ghana in the development, utilisation and promotion of Renewable Energy Technologies (RETs). The report gives a general overview of the state of RETs, describes past/existing institutional, regulatory and policy framework, identifies key barriers to and opportunities for RETs, and recommends directional changes needed to remove barriers and promote wide-scale adoption of RETs in Ghana. A total of eight RETs - biomass-fired dryers, sawdust stoves, sawdust briquette, biogas, solar crop dryer, solar water heater, solar water pump and small hydro power - are covered in the report. Analyses of barriers to the eight RETs are carried out using a framework approach that categorises barriers into socio-technical, economic and crosscutting barriers. Financial analyses, as opposed to economic analyses, have been carried out for all the selected RETs. The report also incorporates stake holders' perspectives and views on barriers and how they can be removed. Ghana is endowed with several renewable energy resources like solar radiation, small hydro, biomass, and wind. Exploitation of Ghana's renewable energy resources has been carried out under two main policy regimes - PND Law 62 (1983) and the Energy Sector Development Programme (ESDP). Several measures and instruments have been employed in the implementation of renewable energy policies. The main measures used are research and development, information and eduction, and some normative measures (like the passing of PNDC Law 62 and the Energy Commission Law). Some economic instruments, such as subsidies, taxes, pricing, financing and duty waiver/reduction, have been used as well but only to a limited extent. The effective development, implementation and dissemination of all the RETs studied are hampered by several barriers, which can be grouped into three main categories - Socio-technical barriers, economic barriers and crosscutting barriers. Socio-technical barriers refer to resource

Barriers to the sustainable development of electrical energy in the industrialized nations

International Nuclear Information System (INIS)

Ringel, M.; Leonardi, J.

2003-01-01

The liberalization of the electricity market in the industrialized nations may considered as an opportunity to bring about a diversification of the energy sector which could help overcome the economic barriers to a more sustainable development By allowing new companies to boost their market share, in many countries increases have been obtained in the supply of electricity based on renewable energy or energy services offering greater efficiency. It is now possible to reduce the cost of the measures which encourage the sustainable development of the sector, taking account of those barriers which prevent the expansion of ENR, hold back further gains in energy efficiency and block a reduction in demand An active energy policy will make it possible to overcome the difficulties encountered in various countries. This study highlights the main barriers to the sustainable development of electrical energy and outlines which solutions may be envisaged to overcome these barriers. (authors)

Financing energy SMEs in Ghana and Senegal: Outcomes, barriers and prospects

DEFF Research Database (Denmark)

Haselip, James Arthur; Desgain, Denis DR; Mackenzie, Gordon A.

2014-01-01

enterprises (energy SMEs). These assumptions were (1) that the lack of affordable local financing presented the most significant barrier to setting up and expanding energy SMEs, and (2) that these barriers would be overcome by a ‘demonstration effect’ whereby successful businesses, supported by donor...

Reducing barriers to energy efficiency in the German mechanical engineering sector. Executive summary

Energy Technology Data Exchange (ETDEWEB)

Schleich, J.; Boede, U.

2000-12-01

This report describes the empirical research into barriers to energy efficiency in the German mechanical engineering (ME) sector. It is one of nine such reports in the BARRIERS project. The report contains description and analysis of four case studies of energy management in German companies in the ME sector. The results are analysed using the theoretical framework developed for the BARRIERS project. The report also provides brief recommendations on how these barriers to the rational use of energy (RUE) may be overcome and how energy efficiency within the ME sector may be improved. The results of the study for the ME sector in Germany are summarised in this executive summary under the following headings: - Characterising the mechanical engineering sector; - Case studies of energy management in the German mechanical engineering sector; - Evidence of barriers in the German mechanical engineering sector; - The role of energy service companies in the mechanical engineering sector; - Policy implications. (orig.)

Reducing barriers to energy efficiency in the German higher education sector. Final report

Energy Technology Data Exchange (ETDEWEB)

Schleich, J.; Boede, U.

2000-12-01

This report describes the empirical research into barriers to energy efficiency in the German higher education (HE) sector. It is one of nine such reports in the BARRIERS project. The report contains description and analysis of six case studies of energy management in German universities. The results are analysed using the theoretical framework developed for the BARRIERS project (Sorrell et al., 2000). The report also provides brief recommendations on how these barriers to the rational use of energy (RUE) may be overcome and how energy efficiency within the sector may be improved. The results of the study for the higher education sector in Germany are summarised in this executive summary under the following headings: - Characterising the higher education sector; - Case studies of energy management in the German higher education sector; - Evidence of barriers in the German higher education sector; - The role of energy service companies in the higher education sector; - Policy implications. (orig.)

Reducing barriers to energy efficiency in the German higher education sector. Executive summary

Energy Technology Data Exchange (ETDEWEB)

Schleich, J.; Boede, U.

2000-12-01

This report describes the empirical research into barriers to energy efficiency in the German higher education (HE) sector. It is one of nine such reports in the BARRIERS project. The report contains description and analysis of six case studies of energy management in German universities. The results are analysed using the theoretical framework developed for the BARRIERS project (Sorrell et al., 2000). The report also provides brief recommendations on how these barriers to the rational use of energy (RUE) may be overcome and how energy efficiency within the sector may be improved. The results of the study for the higher education sector in Germany are summarised in this executive summary under the following headings: - Characterising the higher education sector; - Case studies of energy management in the German higher education sector; - Evidence of barriers in the German higher education sector; - The role of energy service companies in the higher education sector; - Policy implications. (orig.)

Reducing barriers to energy efficiency in the German mechanical engineering sector. Final report

Energy Technology Data Exchange (ETDEWEB)

Schleich, J.; Boede, U.

2000-12-01

This report describes the empirical research into barriers to energy efficiency in the German mechanical engineering (ME) sector. It is one of nine such reports in the BARRIERS project. The report contains description and analysis of four case studies of energy management in German companies in the ME sector. The results are analysed using the theoretical framework developed for the BARRIERS project. The report also provides brief recommendations on how these barriers to the rational use of energy (RUE) may be overcome and how energy efficiency within the ME sector may be improved. The results of the study for the ME sector in Germany are summarised in this executive summary under the following headings: - Characterising the mechanical engineering sector; - Case studies of energy management in the German mechanical engineering sector; - Evidence of barriers in the German mechanical engineering sector; - The role of energy service companies in the mechanical engineering sector; - Policy implications. (orig.)

Barriers and opportunities: A review of selected successful energy-efficiency programs

International Nuclear Information System (INIS)

Worrell, Ernst; Price, Lynn

2001-01-01

In industry, barriers may exist at various points in the decision making process, and in the implementation and management of measures to improve energy efficiency. Barriers may take many forms, and are determined by the business environment and include decision-making processes, energy prices, lack of information, a lack of confidence in the information, or high transaction costs for obtaining reliable information, as well as limited capital availability. Other barriers are the ''invisibility'' of energy efficiency measures and the difficulty of quantifying the impacts, and slow diffusion of innovative technology into markets while firms typically under-invest in R and D, despite the high pay-backs. Various programs try to reduce the barriers to improve the uptake of innovative technologies. A wide array of policies has been used and tested in the industrial sector in industrialized countries, with varying success rates. We review some new approaches to industrial energy efficiency improvement in industrialized countries, focusing on voluntary agreements

Nuclear energy technology transfer: the security barriers

International Nuclear Information System (INIS)

Rinne, R.L.

1975-08-01

The problems presented by security considerations to the transfer of nuclear energy technology are examined. In the case of fusion, the national security barrier associated with the laser and E-beam approaches is discussed; for fission, the international security requirements, due to the possibility of the theft or diversion of special nuclear materials or sabotage of nuclear facilities, are highlighted. The paper outlines the nuclear fuel cycle and terrorist threat, examples of security barriers, and the current approaches to transferring technology. (auth)

Barriers and enablers to implementing multiple stroke guideline recommendations: a qualitative study.

Science.gov (United States)

McCluskey, Annie; Vratsistas-Curto, Angela; Schurr, Karl

2013-08-19

Translating evidence into practice is an important final step in the process of evidence-based practice. Medical record audits can be used to examine how well practice compares with published evidence, and identify evidence-practice gaps. After providing audit feedback to professionals, local barriers to practice change can be identified and targetted with focussed behaviour change interventions. This study aimed to identify barriers and enablers to implementing multiple stroke guideline recommendations at one Australian stroke unit. A qualitative methodology was used. A sample of 28 allied health, nursing and medical professionals participated in a group or individual interview. These interviews occurred after staff had received audit feedback and identified areas for practice change. Questions focused on barriers and enablers to implementing guideline recommendations about management of: upper limb sensory impairments, mobility including sitting balance; vision; anxiety and depression; neglect; swallowing; communication; education for stroke survivors and carers; advice about return to work and driving. Qualitative data were analysed for themes using theoretical domains described by Michie and colleagues (2005). Six group and two individual interviews were conducted, involving six disciplines. Barriers were different across disciplines. The six key barriers identified were: (1) Beliefs about capabilities of individual professionals and their discipline, and about patient capabilities (2) Beliefs about the consequences, positive and negative, of implementing the recommendations (3) Memory of, and attention to, best practices (4) Knowledge and skills required to implement best practice; (5) Intention and motivation to implement best practice, and (6) Resources. Some barriers were also enablers to change. For example, occupational therapists required new knowledge and skills (a barrier), to better manage sensation and neglect impairments while physiotherapists

An improved JWKB approximation for multiple-humped fission barriers

International Nuclear Information System (INIS)

Martinelli, T.; Menapace, E.; Ventura, A.

1977-01-01

Penetrabilities of two- and three-humped fission barriers are calculated in semiclassical (JWKB) approximation, valid also in the case where classical turning points are close, or coincident (excitation energy near the top of some hump). Numerical results are shown for Th 234 . (author)

Understanding energy efficiency barriers in Ukraine: Insights from a survey of commercial and industrial firms

International Nuclear Information System (INIS)

Timilsina, Govinda R.; Hochman, Gal; Fedets, Iryna

2016-01-01

Improvement of energy efficiency is an important element of energy policy for a sustainable supply of energy in Ukraine. However, the country is facing several challenges to the large-scale deployment of energy efficient technologies. We conducted a two-stage quota sample survey of 509 commercial and industrial firms of all regions of Ukraine to understand the barriers to energy efficiency improvements. Our study finds that more than two-thirds of the commercial and industrial firms in the country view improvement of energy efficiency very important to their business. However, due to several barriers they are unable to realize the improvements of energy efficiency. Among the 19 potential barriers investigated in the study, the survey results show that high upfront investment requirement, lack of government policies to support energy efficiency improvements, higher cost of capital, and lack of information and awareness are the most critical barriers to the improvement of energy efficiency in the industrial and commercial sectors in Ukraine. - Highlights: • Despite attractiveness, large scale deployment of energy efficiency is lacking. • Several barriers are responsible for slow implementation of energy efficiency. • Understanding the barriers from the field is crucial to design effective policies. • A survey of commercial and industrial firms reveals the key barriers. • Financial barriers are the main hurdles to adopt energy efficient technologies.

Applications of Skyrme energy-density functional to fusion reactions spanning the fusion barriers

International Nuclear Information System (INIS)

Liu Min; Wang, Ning; Li Zhuxia; Wu Xizhen; Zhao Enguang

2006-01-01

The Skyrme energy density functional has been applied to the study of heavy-ion fusion reactions. The barriers for fusion reactions are calculated by the Skyrme energy density functional with proton and neutron density distributions determined by using restricted density variational (RDV) method within the same energy density functional together with semi-classical approach known as the extended semi-classical Thomas-Fermi method. Based on the fusion barrier obtained, we propose a parametrization of the empirical barrier distribution to take into account the multi-dimensional character of real barrier and then apply it to calculate the fusion excitation functions in terms of barrier penetration concept. A large number of measured fusion excitation functions spanning the fusion barriers can be reproduced well. The competition between suppression and enhancement effects on sub-barrier fusion caused by neutron-shell-closure and excess neutron effects is studied

Addressing and overcoming barriers for energy savings in business

DEFF Research Database (Denmark)

Dirckinck-Holmfeld, Kasper

Energy savings are generally viewed as an effective way to cut GHG emissions, as there are huge potentials for improvements because of several barriers and constraining factors for implementing otherwise profitable solutions. Several different polity tools have been applied to overcome these barr......Energy savings are generally viewed as an effective way to cut GHG emissions, as there are huge potentials for improvements because of several barriers and constraining factors for implementing otherwise profitable solutions. Several different polity tools have been applied to overcome...

Multiple current peaks in room-temperature atmospheric pressure homogenous dielectric barrier discharge plasma excited by high-voltage tunable nanosecond pulse in air

Energy Technology Data Exchange (ETDEWEB)

Yang, De-Zheng; Wang, Wen-Chun; Zhang, Shuai; Tang, Kai; Liu, Zhi-jie; Wang, Sen [Key Lab of Materials Modification, Dalian University of Technology, Ministry of Education, Dalian 116024 (China)

2013-05-13

Room temperature homogenous dielectric barrier discharge plasma with high instantaneous energy efficiency is acquired by using nanosecond pulse voltage with 20-200 ns tunable pulse width. Increasing the voltage pulse width can lead to the generation of regular and stable multiple current peaks in each discharge sequence. When the voltage pulse width is 200 ns, more than 5 organized current peaks can be observed under 26 kV peak voltage. Investigation also shows that the organized multiple current peaks only appear in homogenous discharge mode. When the discharge is filament mode, organized multiple current peaks are replaced by chaotic filament current peaks.

The perceived benefits and barriers to exercise participation in persons with multiple sclerosis.

Science.gov (United States)

Stroud, Nicole; Minahan, Clare; Sabapathy, Surendran

2009-01-01

The purpose of this study was to examine the perceived benefits and barriers to exercise participation in persons with multiple sclerosis (MS). A cross-sectional postal survey comprised of 93 adults with MS was conducted. Participants completed the Exercise Benefits and Barriers Scale (EBBS), Spinal Cord Injury Exercise Self-Efficacy Scale (EXSE), Multiple Sclerosis Impact Scale, Disease Steps Scale and International Physical Activity Questionnaire. Forty-three percent of the participants were classified as exercising individuals (EX group) as compared with non-exercising individuals (non-EX group). Participants in the EX group reported significantly higher scores on the EBBS and EXSE. Items related to physical performance and personal accomplishment were cited as the greatest perceived benefits to exercise participation and those items related to physical exertion as the greatest perceived barriers to both the EX and non-EX groups. When compared with previous studies conducted in the general population, the participants in the present study reported different perceived barriers to exercise participation. Furthermore, awareness of the benefits of physical activity is not sufficient to promote exercise participation in persons with MS. Perceived exercise self-efficacy is shown to play an important role in promoting exercise participation in persons with MS.

Key Barriers to the Implementation of Solar Energy in Nigeria: A Critical Analysis

Science.gov (United States)

Abdullahi, D.; Suresh, S.; Renukappa, S.; Oloke, D.

2017-08-01

Nigeria, potentially, has abundant sunshine throughout the year, making it full thirst for solar energy generation. Even though, the country’s solar energy projects have not realised a fair result over the years, due to many barriers associated with initiatives implementation. Therefore, the entire power sector remains incapacitated to generate, transmit and distribute a clean, affordable and sustainable energy to assist economic growth. The research integrated five African counterpart’s solar energy initiatives, barriers, policies and strategies adopted as a lesson learned to Nigeria. Inadequate solar initiative’s research, lack of technological know-how, short-term policies, lack of awareness and political instability are the major barriers that made the implementation of solar initiatives almost impossible in Nigeria. The shock of the barriers therefore, constitutes a major negative contribution to the crippling of the power sector in the state. Future research will concentrate on initiatives for mitigating solar and other renewable energy barriers.

Li breakup polarization potential at near barrier energies

International Nuclear Information System (INIS)

Lubian, F. J.; Correa, T.; Gomes, P.R.S.; Paes, B; Figueira, J. M.; Abriola, D.; Fernandez, J. O.; Capurro, O. A.; Marti, G.V.; Martinez, D.; Heimann; Negri, A.; Pacheco, A. J.; Padron, I.

2007-01-01

Inelastic and one neutron transfer cross sections at energies around the Coulomb barrier were used to derive dynamic polarization potential (DPP) for the 7 Li + 27 Al system. The DPP due to breakup, obtained in a simple way, indicates that its real part is repulsive at nearbarrier energies. (Author)

Study of Quasielastic scattering for 7Li+159Tb at around- barrier energies

Directory of Open Access Journals (Sweden)

Mukherjee A.

2017-01-01

Full Text Available Quasielastic scattering cross sections for the reaction 7Li+159Tb have been measured at large backangles, at energies around the Coulomb barrier. The quasielastic barrier distribution has been extracted from the measured quasielastic scattering excitation function, including and excluding α particle contribution. The peak of the quasielastic barrier distribution including α particle contribution shows a shift towards higher energy compared to the peak of the distribution without α particles. The quasielastic barrier distribution when compared to the calculated fusion barrier distribution, appears to show reasonable agreement for the system.

The diffusion of solar energy use in HK: What are the barriers?

International Nuclear Information System (INIS)

Zhang Xiaoling; Shen Liyin; Chan, Sum Yee

2012-01-01

The world is facing the severe challenges of energy depletion and carbon dioxide (CO 2 ) emissions, and solar energy is considered to be a promising source of renewable energy and effective solution. However, the application of solar energy is limited in practice due to various barriers. Based on data collected from a survey of practice, this paper identifies the key barriers to the deployment of solar photovoltaic (PV) energy systems in Hong Kong. These include “high initial and repair cost”, “long payback period”, “inadequate installation space and service infrastructure”, “lack of participation of stakeholders/community in energy policy” and “lack of incentives by legislation and regulation”. Recommendations for addressing these barriers are proposed. For example, the high cost of solar PV energy systems can be reduced by the development and mass production of low-cost fabrication technologies and high performance PV technologies. Solar thermal applications should be encouraged as they are much more economical than solar PVs. It is also recommended that the Hong Kong Government adopt strategies to encourage a greater use of solar energy systems. The results from this study not only provide useful information for the Government, the private sector and consumers in Hong Kong but are also likely to apply equally to other similar regions around the world. - Highlights: ► The Hong Kong Government needs to adopt various strategies to encourage the solar energy system application. ► This paper identifies the key barriers to the diffusion of solar energy systems from a questionnaire survey and case study in Hong Kong. ► The barriers highlighted from the questionnaire survey include “high initial and repair cost”, “long payback period”, “inadequate installation space and service infrastructure”, “lack of stakeholder/community participation in energy choices” and “legal and regulation constraints”.

6,7Li + 28Si total reaction cross sections at near barrier energies

International Nuclear Information System (INIS)

Pakou, A.; Musumarra, A.; Pierroutsakou, D.; Alamanos, N.; Assimakopoulos, P.A.; Divis, N.; Doukelis, G.; Gillibert, A.; Harissopulos, S.; Kalyva, G.; Kokkoris, M.; Lagoyannis, A.; Mertzimekis, T.J.; Nicolis, N.G.; Papachristodoulou, C.; Perdikakis, G.; Roubos, D.; Rusek, K.; Spyrou, S.; Zarkadas, Ch.

2007-01-01

Total reaction cross section measurements for the 6,7 Li + 28 Si systems have been performed at near-barrier energies. The results indicate that, with respect to the potential anomaly at barrier, 6 Li and 7 Li on light targets exhibit similar energy dependence on the imaginary potential. Comparisons are made with 6,7 Li cross sections on light and heavy targets, extracted via previous elastic scattering measurements and also with CDCC calculations. Energy dependent parametrisations are also obtained for total reaction cross sections of 6,7 Li on Si, as well as on any target, at near barrier energies

Improving energy efficiency in industrial energy systems an interdisciplinary perspective on barriers, energy audits, energy management, policies, and programs

CERN Document Server

Thollander, Patrik

2012-01-01

Industrial energy efficiency is one of the most important means of reducing the threat of increased global warming. Research however states that despite the existence of numerous technical energy efficiency measures, its deployment is hindered by the existence of various barriers to energy efficiency. The complexity of increasing energy efficiency in manufacturing industry calls for an interdisciplinary approach to the issue. Improving energy efficiency in industrial energy systems applies an interdisciplinary perspective in examining energy efficiency in industrial energy systems, and discuss

Migration energy barriers of symmetric tilt grain boundaries in body-centered cubic metal Fe

International Nuclear Information System (INIS)

Wu, Minghui; Gu, Jianfeng; Jin, Zhaohui

2015-01-01

Graphical abstract: DFT calculated migration energy barrier (left) for symmetric grain boundary in metals is an essential physical property to measure the trend of grain boundary migration, in particular, in terms of the classical homogeneous nucleation model of GB dislocation/disconnection loops (right). - Migration energy barriers of two symmetric tilt grain boundaries in body-centered cubic metal Fe are obtained via first-principles calculations in combination with the nudged elastic band methods. Although the two grain boundaries show similar grain boundary energies, the migration energy barriers are different. Based on a homogeneous nucleation theory of grain-boundary dislocation loops, the calculated energy barrier provides a measure of intrinsic grain-boundary mobility and helps to evaluate effects due to vacancy and interstitial atoms such as carbon

Market failures and barriers as a basis for clean energy policies

International Nuclear Information System (INIS)

Brown, M.A.

2001-01-01

This paper provides compelling evidence that large-scale market failures and barriers prevent consumers in the United States from obtaining energy services at least cost. Assessments of numerous energy policies and programs suggest that public interventions can overcome many of these market obstacles. By articulating these barriers and reviewing the literature on ways of addressing them, this paper provides a strong justification for the policy portfolios that define the ''Scenarios for a Clean Energy Future'', a study conducted by five National Laboratories. These scenarios are described in other papers published in this special issue of Energy Policy. (author)

Barriers to Energy Efficiency in Swedish Non-Energy-Intensive Micro- and Small-Sized Enterprises—A Case Study of a Local Energy Program

Directory of Open Access Journals (Sweden)

Fredrik Backman

2017-01-01

Full Text Available Improved energy efficiency has become a strategic issue and represents a priority for European competitiveness. Countries adopt various energy policies on local and national levels where energy audit programs are the most common energy end-use efficiency policy for industrial small- and medium-sized enterprises (SMEs. However, studies indicate that cost-efficient energy conservation measures are not always implemented, which can be explained by the existence of barriers to energy efficiency. This paper investigates how Swedish municipalities can support local micro- and small-sized enterprises with improved energy efficiency and the existence of different barriers to the implementation of energy efficiency. Relating this empirical case study to the theoretical barriers outlined in the text, this study found that the major explanatory factors related to non-implementation of cost-effective energy efficiency measures among micro- and small-sized industrial enterprises were bounded rationality (lack of time and/or other priorities, split incentives (having other priorities for capital investments, and imperfect information (slim organization and lack of technical skill. This study also found that information in the form of a report was the main thing that companies gained from working on the project “Energy-Driven Business”. Notably, the study involved companies that had participated in a local energy program and, still, companies face major barriers inhibiting implementation, indicating a need to further study other alternative policy models and how knowledge transfer can be improved.

Institutional distributed energy interconnection barriers

International Nuclear Information System (INIS)

Castelaz, S.A.

2002-01-01

This PowerPoint presentation provided an introduction to Encorp Inc., a leading provider of network technology and infrastructure management solutions for the distributed energy market. Encorp develops and markets software and hardware technology solutions for communications, control and networking of distributed energy. It is developing and implementing real-time, distributed energy-focused solutions for a wide variety of applications through new products and services which are technology neutral, and easily networked. Encorp controls more than 500 MW of distributed power with a total of 127 customers. This paper reviewed 3 barriers (regulatory, contractual/tariffs, and business practices) based on US experience. The challenge remaining is to determine if microgrids can be used effectively, and to determine the limitations of bi-directional power flows. The key issues regarding how end-users can share the costs and maximize on the benefits of distributed energy resources include: standby service charges, departing load charges, regulatory uncertainty, rate class degradation, lack of incentives for utility cost reduction, and lack of ability to create experimental tariffs. tabs., figs

How to deal with multiple binding poses in alchemical relative protein-ligand binding free energy calculations.

Science.gov (United States)

Kaus, Joseph W; Harder, Edward; Lin, Teng; Abel, Robert; McCammon, J Andrew; Wang, Lingle

2015-06-09

Recent advances in improved force fields and sampling methods have made it possible for the accurate calculation of protein–ligand binding free energies. Alchemical free energy perturbation (FEP) using an explicit solvent model is one of the most rigorous methods to calculate relative binding free energies. However, for cases where there are high energy barriers separating the relevant conformations that are important for ligand binding, the calculated free energy may depend on the initial conformation used in the simulation due to the lack of complete sampling of all the important regions in phase space. This is particularly true for ligands with multiple possible binding modes separated by high energy barriers, making it difficult to sample all relevant binding modes even with modern enhanced sampling methods. In this paper, we apply a previously developed method that provides a corrected binding free energy for ligands with multiple binding modes by combining the free energy results from multiple alchemical FEP calculations starting from all enumerated poses, and the results are compared with Glide docking and MM-GBSA calculations. From these calculations, the dominant ligand binding mode can also be predicted. We apply this method to a series of ligands that bind to c-Jun N-terminal kinase-1 (JNK1) and obtain improved free energy results. The dominant ligand binding modes predicted by this method agree with the available crystallography, while both Glide docking and MM-GBSA calculations incorrectly predict the binding modes for some ligands. The method also helps separate the force field error from the ligand sampling error, such that deviations in the predicted binding free energy from the experimental values likely indicate possible inaccuracies in the force field. An error in the force field for a subset of the ligands studied was identified using this method, and improved free energy results were obtained by correcting the partial charges assigned to the

How To Deal with Multiple Binding Poses in Alchemical Relative Protein–Ligand Binding Free Energy Calculations

Science.gov (United States)

2016-01-01

Recent advances in improved force fields and sampling methods have made it possible for the accurate calculation of protein–ligand binding free energies. Alchemical free energy perturbation (FEP) using an explicit solvent model is one of the most rigorous methods to calculate relative binding free energies. However, for cases where there are high energy barriers separating the relevant conformations that are important for ligand binding, the calculated free energy may depend on the initial conformation used in the simulation due to the lack of complete sampling of all the important regions in phase space. This is particularly true for ligands with multiple possible binding modes separated by high energy barriers, making it difficult to sample all relevant binding modes even with modern enhanced sampling methods. In this paper, we apply a previously developed method that provides a corrected binding free energy for ligands with multiple binding modes by combining the free energy results from multiple alchemical FEP calculations starting from all enumerated poses, and the results are compared with Glide docking and MM-GBSA calculations. From these calculations, the dominant ligand binding mode can also be predicted. We apply this method to a series of ligands that bind to c-Jun N-terminal kinase-1 (JNK1) and obtain improved free energy results. The dominant ligand binding modes predicted by this method agree with the available crystallography, while both Glide docking and MM-GBSA calculations incorrectly predict the binding modes for some ligands. The method also helps separate the force field error from the ligand sampling error, such that deviations in the predicted binding free energy from the experimental values likely indicate possible inaccuracies in the force field. An error in the force field for a subset of the ligands studied was identified using this method, and improved free energy results were obtained by correcting the partial charges assigned to the

Free energy barriers to evaporation of water in hydrophobic confinement.

Science.gov (United States)

Sharma, Sumit; Debenedetti, Pablo G

2012-11-08

We use umbrella sampling Monte Carlo and forward and reverse forward flux sampling (FFS) simulation techniques to compute the free energy barriers to evaporation of water confined between two hydrophobic surfaces separated by nanoscopic gaps, as a function of the gap width, at 1 bar and 298 K. The evaporation mechanism for small (1 × 1 nm(2)) surfaces is found to be fundamentally different from that for large (3 × 3 nm(2)) surfaces. In the latter case, the evaporation proceeds via the formation of a gap-spanning tubular cavity. The 1 × 1 nm(2) surfaces, in contrast, are too small to accommodate a stable vapor cavity. Accordingly, the associated free energy barriers correspond to the formation of a critical-sized cavity for sufficiently large confining surfaces, and to complete emptying of the gap region for small confining surfaces. The free energy barriers to evaporation were found to be of O(20kT) for 14 Å gaps, and to increase by approximately ~5kT with every 1 Å increase in the gap width. The entropy contribution to the free energy of evaporation was found to be independent of the gap width.

Energy education: breaking up the rational energy use barriers

International Nuclear Information System (INIS)

Dias, R.A.; Mattos, C.R.; Balestieri, J.A.P.

2004-01-01

Human development is associated directly or indirectly with the energy use, and because of this the energetic sources were dealt with in the recent past, as fully available to human necessities. The reality shows that the energy availability, considering the non-renewable sources, is limited, and beyond that, the exploration, the processing and the use of energy impose considerable impacts on the environment. There is not a system which operates with no losses and without imposing changes to the environment. Therefore, the energy conservation incorporates the concepts and the actions applied to the research of sustainable balance between nature and the energy availability and use. Such actions can be presented both in the short term, in which the energy system is close to a collapse, or in the medium/long term, in which those responsible for the energy policies are concerned with the structure of the socio-economic development. Such a situation requires more responsibility in the treatment of energy questions, mainly through education, which represents long-term investments. This paper discusses barriers that are present in the projects applied to energy conservation, by making clear that education is one of the best ways to transform the human behavior in for the rational use of energy

Heavy ion collisions at energies near the Coulomb barrier 1990

International Nuclear Information System (INIS)

Nagarajan, M.A.

1991-01-01

During recent years, detailed experimental and theoretical investigations have been carried out on heavy ion collisions at energies close to the Coulomb barrier. These studies have provided direct evidence of strong couplings between the various reaction channels available at energies near the top of the Coulomb barrier. This field of research has remained the focus of interest and with improved experimental techniques, new detailed high resolution data have been obtained. The workshop on ''Heavy Ion Collisions at Energies Close to the Coulomb Barrier'' was organized with the aim of reviewing the current understanding of the collision dynamics and to discuss future directions in this area of research. The topics discussed at the workshop were broadly classified under the titles: quasielastic reactions; fusion of heavy ions; and shape and spin dependence in heavy ion collisions. The last of these topics was included to review new data obtained with polarized heavy ions and their theoretical interpretations. This volume contains the invited and contributed talks as well as a few short presentations during panel discussions. (author)

Deep inelastic collisions at near-barrier energies and search for cold donor-fragment production

International Nuclear Information System (INIS)

Chatterjee, M.B.

1992-01-01

Deep inelastic collisions in the near barrier energies of the mass asymmetric systems are of importance since controversial results on energy partition are being reported. Energy dissipation and the partition of dissipated energy among the reaction partners are of interest. Search for cold donor-fragment production at near barrier energies were carried out on a mass asymmetric system like Ni+Pb. (author). 13 refs., 8 figs

Barriers to the adoption of energy-conserving technologies in the textile industry

Energy Technology Data Exchange (ETDEWEB)

Evans, A.R.; Zussman, S.K.

1979-09-01

An overview of the textile industry and a discussion of energy-conserving technologies currently available at the pilot-demonstration stage are presented. Existing and potential barriers to the adoption of these technologies in the textile industry identified are: economic; technical acceptance; conflict between commitments of capital for compliance with environmental and health regulations and for investment in energy conservation measures; and a lack of information and technical expertise. Possible measures to eliminate barriers to the implementation of energy-conserving technologies are discussed. (MCW)

Transition to distributed energy generation in Finland: Prospects and barriers

International Nuclear Information System (INIS)

Ruggiero, Salvatore; Varho, Vilja; Rikkonen, Pasi

2015-01-01

Small-scale distributed energy generation is expected to play an important role in helping Finland increase its energy self-sufficiency. However, the overall strategy to date for promoting distributed energy remains unclear. It is not yet well understood which factors promote the growth of the distributed energy sector and what barriers need to be removed. In this article we present the results of a questionnaire directed at a panel of 26 experts from the distributed energy value chain and 15 semi-structured interviews with industry and non-industry representatives. We investigated, from a sociotechnical transition perspective, the possibilities and challenges of the transition to distributed energy in Finland through 2025. The results show that a shift to a prosperous future for distributed energy is possible if permit procedures, ease of grid connection, and taxation laws are improved in the electricity sector and new business concepts are introduced in the heat sector. In contrast to other European countries, the transition in Finland is expected to take place through a market-based approach favoring investment-focused measures. We conclude that incentive-based schemes alone, whatever they may be, will be insufficient to create significant growth in Finland without institutional change, removal of barriers, and the engagement of key actors. - Highlights: • We examine the possibilities and challenges of the transition to DE in Finland. • Technological niches are emerging both in the heat and electricity sector. • Business model innovation is evident only in the electricity sector. • Removing barriers and developing new business models will accelerate the transition.

Technical Barriers, Gaps, and Opportunities Related to Home Energy Upgrade Market Delivery

Energy Technology Data Exchange (ETDEWEB)

Bianchi, M. V. A.

2011-11-01

This report outlines the technical barriers, gaps, and opportunities that arise in executing home energy upgrade market delivery approaches, as identified through research conducted by the U.S. Department of Energy's Building America program. The objective of this report is to outline the technical1 barriers, gaps, and opportunities that arise in executing home energy upgrade market delivery approaches, as identified through research conducted by the U.S. Department of Energy's (DOE) Building America program. This information will be used to provide guidance for new research necessary to enable the success of the approaches. Investigation for this report was conducted via publications related to home energy upgrade market delivery approaches, and a series of interviews with subject matter experts (contractors, consultants, program managers, manufacturers, trade organization representatives, and real estate agents). These experts specified technical barriers and gaps, and offered suggestions for how the technical community might address them. The potential benefits of home energy upgrades are many and varied: reduced energy use and costs; improved comfort, durability, and safety; increased property value; and job creation. Nevertheless, home energy upgrades do not comprise a large part of the overall home improvement market. Residential energy efficiency is the most complex climate intervention option to deliver because the market failures are many and transaction costs are high (Climate Change Capital 2009). The key reasons that energy efficiency investment is not being delivered are: (1) The opportunity is highly fragmented; and (2) The energy efficiency assets are nonstatus, low-visibility investments that are not properly valued. There are significant barriers to mobilizing the investment in home energy upgrades, including the 'hassle factor' (the time and effort required to identify and secure improvement works), access to financing, and the

Critical energy barrier for capillary condensation in mesopores: Hysteresis and reversibility

International Nuclear Information System (INIS)

Hiratsuka, Tatsumasa; Tanaka, Hideki; Miyahara, Minoru T.

2016-01-01

Capillary condensation in the regime of developing hysteresis occurs at a vapor pressure, P cond , that is less than that of the vapor-like spinodal. This is because the energy barrier for the vapor-liquid transition from a metastable state at P cond becomes equal to the energy fluctuation of the system; however, a detailed mechanism of the spontaneous transition has not been acquired even through extensive experimental and simulation studies. We therefore construct accurate atomistic silica mesopore models for MCM-41 and perform molecular simulations (gauge cell Monte Carlo and grand canonical Monte Carlo) for argon adsorption on the models at subcritical temperatures. A careful comparison between the simulation and experiment reveals that the energy barrier for the capillary condensation has a critical dimensionless value, W c * = 0.175, which corresponds to the thermal fluctuation of the system and depends neither on the mesopore size nor on the temperature. We show that the critical energy barrier W c * controls the capillary condensation pressure P cond and also determines a boundary between the reversible condensation/evaporation regime and the developing hysteresis regime.

Critical energy barrier for capillary condensation in mesopores: Hysteresis and reversibility

Science.gov (United States)

Hiratsuka, Tatsumasa; Tanaka, Hideki; Miyahara, Minoru T.

2016-04-01

Capillary condensation in the regime of developing hysteresis occurs at a vapor pressure, Pcond, that is less than that of the vapor-like spinodal. This is because the energy barrier for the vapor-liquid transition from a metastable state at Pcond becomes equal to the energy fluctuation of the system; however, a detailed mechanism of the spontaneous transition has not been acquired even through extensive experimental and simulation studies. We therefore construct accurate atomistic silica mesopore models for MCM-41 and perform molecular simulations (gauge cell Monte Carlo and grand canonical Monte Carlo) for argon adsorption on the models at subcritical temperatures. A careful comparison between the simulation and experiment reveals that the energy barrier for the capillary condensation has a critical dimensionless value, Wc* = 0.175, which corresponds to the thermal fluctuation of the system and depends neither on the mesopore size nor on the temperature. We show that the critical energy barrier Wc* controls the capillary condensation pressure Pcond and also determines a boundary between the reversible condensation/evaporation regime and the developing hysteresis regime.

Barriers to energy efficiency in shipping: A triangulated approach to investigate the principal agent problem

International Nuclear Information System (INIS)

Rehmatulla, Nishatabbas; Smith, Tristan

2015-01-01

Energy efficiency is a key policy strategy to meet some of the challenges being faced today and to plan for a sustainable future. Numerous empirical studies in various sectors suggest that there are cost-effective measures that are available but not always implemented due to existence of barriers to energy efficiency. Several cost-effective energy efficient options (technologies for new and existing ships and operations) have also been identified for improving energy efficiency of ships. This paper is one of the first to empirically investigate barriers to energy efficiency in the shipping industry using a novel framework and multidisciplinary methods to gauge implementation of cost-effective measures, perception on barriers and observations of barriers. It draws on findings of a survey conducted of shipping companies, content analysis of shipping contracts and analysis of energy efficiency data. Initial results from these methods suggest the existence of the principal agent problem and other market failures and barriers that have also been suggested in other sectors and industries. Given this finding, policies to improve implementation of energy efficiency in shipping need to be carefully considered to improve their efficacy and avoid unintended consequences. -- Highlights: •We provide the first analysis of the principal agent problem in shipping. •We develop a framework that incorporates methodological triangulation. •Our results show the extent to which this barrier is observed and perceived. •The presence of the barrier has implications on the policy most suited to shipping

Should we quit our jobs? Challenges, barriers and recommendations for interdisciplinary energy research

International Nuclear Information System (INIS)

Schuitema, Geertje; Sintov, Nicole D.

2017-01-01

Many plea for a better integration of social sciences in energy research, which would imply more comprehensive interdisciplinary energy research. We argue that in order to achieve this, institutional barriers and research challenges need to be recognised and addressed. We identify six challenges and barriers, and provide recommendations for working towards solutions. We conclude that to engage in interdisciplinary research implies extra costs and fewer rewards for all researchers, particularly early and mid-career academics. We propose a new conceptualisation of practices and incentive structures among academic institutions, funding agencies, and publication outlets, and urge all energy researchers to join this debate. - Highlights: • Interdisciplinary energy research currently does not reach its full potential. • Social sciences are underutilised in energy research. • Barriers and challenges need to be addressed to stimulate interdisciplinary energy research. • High costs and small rewards for interdisciplinary (early and mid-career) researchers.

Potential and barrier study. Energy efficiency in Norwegian vocational buildings; Potensial- og barrierestudie. Energieffektivisering i norske yrkesbygg

Energy Technology Data Exchange (ETDEWEB)

Boehn, Trond Ivar; Palm, Linn Therese; Bakken, Line; Nossum, Aase; Jordell, Hanne

2012-07-01

On behalf of Enova SF, Multiconsult AS and Analyse og Strategi AS conducted an analysis to identify potential and barriers related to commercial buildings energy performance. The aim of this study was to determine what is the potential for energy efficiency for Norwegian vocational buildings that distinguishes between theoretical, technical, financial and real potential. Technical potential is the percentage of the theoretical potential that is technically feasible. Economic potential is the proportion of technical potential that is economically profitable to implement. Economic potential varies with the energy price. Build a small part of the total potential in 2020. In the calculation of the real potential is taken into account induced potential in terms of that, each year, a percentage actually implementing energy conservation measures (energy efficiency ratio 2%), a percentage rehabilitating / upgrading existing buildings (rehab rate 1.5%), and that a proportion of new buildings built better than regulatory requirements (rate 10%). In real potential for energy efficiency is the proportion of the economic potential that is not natural triggered but which is limited by various barriers. In real potential also varies with energy price. Respondents in our study is particularly concerned with the economic barriers, and least concerned the technical barriers. Attitudes and knowledge barriers are also very important. Lack of knowledge the effects and benefits of energy efficiency means that negative attitudes persist and that myths about the lack of profitability continues to exist. Many believe this is due to lack the knowledge and can be the cause of other types of barriers such as economic barriers. It has been analyzed which part of the real potential bounded by the barriers, and which type of institutions in society that can reduce these barriers with various categories of instrument. Main barriers for existing buildings practical barriers, economic barriers and

Identifying barriers to aboriginal renewable energy deployment in Canada

International Nuclear Information System (INIS)

Krupa, Joel

2012-01-01

As one of the largest and wealthiest countries in the world, Canada stands well-positioned to take advantage of ongoing growth in North American demand for primary energy supply by expanding domestic delivery of renewable energy generation to internationally interconnected electric grids across the country. There are myriad benefits of adopting the renewable energy approach to development—as the province of Ontario has acknowledged through the implementation of their 2009 Green Energy Act—including drastic reductions in carbon emissions, the decommissioning of existing fossil fuel power generation that cause serious public health problems, and opportunities for sustainable development at the community level. One group in particular stands poised to shape these debates. In Canada, historically marginalized Aboriginal peoples remain one of the groups with the greatest potential for meeting these enormous renewable energy deployment needs. Aboriginal involvement in renewable energy generation in Canada has been as diverse as Canada's Aboriginal peoples and groups have already adopted a range of different solutions to meet energy supply needs. However, many significant barriers exist that prevent this diverse cultural group from reaching its full potential. The article identifies some of these shortcomings and analyzes their roots. - Highlights: ► Renewable energy is one of the most important sustainable development opportunities today. ► Aboriginal-led renewable development could dramatically increase Canadian supply. ► Surmountable barriers are identified.

Identifying barriers in the diffusion of renewable energy sources

International Nuclear Information System (INIS)

Eleftheriadis, Iordanis M.; Anagnostopoulou, Evgenia G.

2015-01-01

Rapid diffusion of renewable energy sources (RES) in the electricity power sector is crucial if the EU wants to fulfill its 2050 CO 2 reduction commitments. For this reason, identifying and alleviating all barriers that hinder the development of RES is necessary to the successful deployment of these technologies. This paper discusses the main barriers in the diffusion of wind and photovoltaic (PV) solar power in the Greek electricity sector by drawing on the literature of technological innovation systems and system functions. Furthermore, we provide an explanation of the different diffusion rates between the two technologies. Inadequate financial resources, low grid capacity, delays in the issuance of building permits, opposition from local communities to the construction of wind farms and the lack of a stable institutional framework are among the most important barriers that inhibit the diffusion of the wind and PV solar power. The nature of the barriers identified in this study calls for policy intervention. - Highlights: • Firms in the Greek wind and solar power sectors assess RES barriers. • Lack of financial resources is the most important RES barrier. • Lack of a stable institutional framework negatively affects RES deployment. • The support of the public sector is crucial to the diffusion of RES. •Wind power faces strong legitimization barriers

A network approach to overcoming barriers to market engagement for SMEs in energy efficiency initiatives such as the Green Deal

International Nuclear Information System (INIS)

O’Keeffe, Juliette M.; Gilmour, Daniel; Simpson, Edward

2016-01-01

The Green Deal (GD) was launched in 2013 by the UK Government as a market-led scheme to encourage uptake of energy efficiency measures in the UK and create green sector jobs. The scheme closed in July 2015 after 30 months due to government concerns over low uptake and industry standards but additional factors potentially contributed to its failure such as poor scheme design and lack of understanding of the customer and supply chain journey. We explore the role of key delivery agents of GD services, specifically SMEs, and we use the LoCal-Net project as a case study to examine the use of networks to identify and reduce barriers to SME market engagement. We find that SMEs experienced multiple barriers to interaction with the GD such as lack of access to information, training, and confusion over delivery of the scheme but benefited from interaction with the network to access information, improve understanding of the scheme, increasing networking opportunities and forming new business models and partnerships to reduce risk. The importance of SMEs as delivery agents and their role in the design of market-led schemes such as the GD are discussed with recommendations for improving SME engagement in green sector initiatives. - Highlights: • The role of delivery agents should be addressed in voluntary energy reduction schemes. • SMEs attempting to engage in the Green Deal market faced multiple barriers. • Networks can assist in overcoming SME barriers to entry into new green sector markets. • Access to information, contacts and experts are key benefits of business networks. • Policy driven market-led schemes must consider all actors to prevent early failures.

Controlling Schottky energy barriers in organic electronic devices using self-assembled monolayers

Science.gov (United States)

Campbell, I. H.; Rubin, S.; Zawodzinski, T. A.; Kress, J. D.; Martin, R. L.; Smith, D. L.; Barashkov, N. N.; Ferraris, J. P.

1996-11-01

We demonstrate tuning of Schottky energy barriers in organic electronic devices by utilizing chemically tailored electrodes. The Schottky energy barrier of Ag on poly[2-methoxy, 5-(2'-ethyl-hexyloxy)- 1,4-phenylene was tuned over a range of more than 1 eV by using self-assembled monolayers (SAM's) to attach oriented dipole layers to the Ag prior to device fabrication. Kelvin probe measurements were used to determine the effect of the SAM's on the Ag surface potential. Ab initio Hartree-Fock calculations of the molecular dipole moments successfully describe the surface potential changes. The chemically tailored electrodes were then incorporated in organic diode structures and changes in the metal/organic Schottky energy barriers were measured using an electroabsorption technique. These results demonstrate the use of self-assembled monolayers to control metal/organic interfacial electronic properties. They establish a physical principle for manipulating the relative energy levels between two materials and demonstrate an approach to improve metal/organic contacts in organic electronic devices.

E4 - Energy efficient elevators and escalators. Barriers to and strategies for promoting energy-efficient lift and escalator technologies

Energy Technology Data Exchange (ETDEWEB)

Duetschke, Elisabeth; Hirzel, Simon

2010-02-25

According to prior findings of the E4 project, considerable savings potential exists both for lifts and escalators that could be realized if appropriate technology is implemented. However, energy-efficient technology is slowly diffusing the market - a phenomenon that could be explained by barriers present in the market. A barrier is defined as a mechanism that inhibits a decision or behavior that appears to be both energy-efficient and economically efficient and thereby prevents investment in energy-efficient technologies. This document has two aims. First, it will identify influential barriers in the European lift and escalator market. This analysis is based on the literature as well as a study including interviews as well as group discussions with relevant stakeholders. Second, strategies and measures to overcome the barriers identified in the first step are outlined. Major barriers to the penetration of energy-efficient technologies identified in this paper include a lack of monitoring energy consumption of installations and a lack of awareness of as well as knowledge about energy-efficient technology. Thus, installations and components are usually chosen without a (comprehensive) assessment of their energy consumption and without considering life-cycle approaches. On top of this, split incentives are a regularly occurring barrier. Various stakeholders are influential in the decisionmaking process about an installation or its components. However, those who will later pay for the energy consumption often are not involved in this process. Moreover, it is important to keep in mind that the number of new lifts and escalators installed each year is relatively low compared to the existing stock. Thus, it is very important to discuss enhancement of energy efficiency also for the existing stock. Based on our analyses, several recommendations are developed in this paper that could contribute to a market transformation in the lift and escalator market. First of all, a

Magnetization reversal processes of single nanomagnets and their energy barrier

International Nuclear Information System (INIS)

Krone, P.; Makarov, D.; Albrecht, M.; Schrefl, T.; Suess, D.

2010-01-01

Micromagnetic simulations were performed to investigate the influence of geometry and magnetic anisotropy constant on energy barrier and magnetization reversal mechanism of individual bits important for the bit patterned media concept in magnetic data storage. It is shown that dependency of the energy barrier on magnetic and geometric properties of bits can be described by an analytical approach in the case of quasi-coherent magnetization rotation process. However, when the bit size exceeds a critical size, for which an incoherent magnetization reversal is preferred, the analytical approach becomes invalid and no self-consistent theory is available. By systematically investigating the influence of bit size on the magnetization reversal mode, it was found that the transition from quasi-coherent to incoherent magnetization reversal mode can still be described analytically if an activation volume is considered instead of the bit volume. In this case, the nucleation volume is an important parameter determining thermal stability of the bit. If the volume of the bit is larger than twice the activation volume, the energy barrier stays nearly constant; with further increase in bit size, no gain in thermal stability can be achieved.

Direct measurement of free-energy barrier to nucleation of crystallites in amorphous silicon thin films

Science.gov (United States)

Shi, Frank G.

1994-01-01

A method is introduced to measure the free-energy barrier W(sup *), the activation energy, and activation entropy to nucleation of crystallites in amorphous solids, independent of the energy barrier to growth. The method allows one to determine the temperature dependence of W(sup *), and the effect of the preparation conditions of the initial amorphous phase, the dopants, and the crystallization methds on W(sup *). The method is applied to determine the free-energy barrier to nucleation of crystallites in amorphous silicon (a-Si) thin films. For thermally induced nucleation in a-Si thin films with annealing temperatures in the range of from 824 to 983 K, the free-energy barrier W(sup *) to nucleation of silicon crystals is about 2.0 - 2.1 eV regardless of the preparation conditions of the films. The observation supports the idea that a-Si transforms into an intermediate amorphous state through the structural relaxation prior to the onset of nucleation of crystallites in a-Si. The observation also indicates that the activation entropy may be an insignificant part of the free-energy barrier for the nucleation of crystallites in a-Si. Compared with the free-energy barrier to nucleation of crystallites in undoped a-Si films, a significant reduction is observed in the free-energy barrier to nucleation in Cu-doped a-Si films. For a-Si under irradiation of Xe(2+) at 10(exp 5) eV, the free-energy barrier to ion-induced nucleation of crystallites is shown to be about half of the value associated with thermal-induced nucleation of crystallites in a-Si under the otherwise same conditions, which is much more significant than previously expected. The present method has a general kinetic basis; it thus should be equally applicable to nucleation of crystallites in any amorphous elemental semiconductors and semiconductor alloys, metallic and polymeric glasses, and to nucleation of crystallites in melts and solutions.

Barriers to investments in energy saving technologies. Case study for the industry

NARCIS (Netherlands)

Masselink, Dirk Jan

2007-01-01

To realise future energy saving targets, the government needs to increase energy reduction rates. One option to increase energy savings is found in removing barriers to investments in cost-effective energy saving technologies. Many technologies save energ

Renewable Energy Permitting Barriers in Hawaii: Experience from the Field

Energy Technology Data Exchange (ETDEWEB)

Busche, S.; Donnelly, C.; Atkins, D.; Fields, R.; Black, C.

2013-03-01

This white paper presents a summary of the solicited input from permitting agencies and renewable energy developers on the permitting process in Hawaii to provide stakeholders in Hawaii, particularly those involved in permitting, with information on current permitting barriers that renewable energy developers are experiencing.

Up and down the sanitation ladder: Harmonizing the treatment and multiple-barrier perspectives on risk reduction in wastewater irrigated agriculture

DEFF Research Database (Denmark)

Keraita, Bernard; Drechsel, P.; Konradsen, Flemming

2010-01-01

This paper discusses two prominent perspectives in the debate on risk reduction in wastewater irrigation; reliance on conventional wastewater treatment and the multiple-barrier approach. The treatment perspective is based on water-quality standards for wastewater irrigation with treatment...... considered the ultimate risk reductionmeasure. The somewhat broader multiple-barrier perspective supports the use of a combination of pre-farm, on-farm and postfarm barriers, including, where possible, wastewater treatment, to meet required health targets. The discussion in this paper shows that each...

Identifying and prioritizing barriers to implementation of smart energy city projects in Europe: An empirical approach

International Nuclear Information System (INIS)

Mosannenzadeh, Farnaz; Di Nucci, Maria Rosaria; Vettorato, Daniele

2017-01-01

Successful implementation of smart energy city projects in Europe is crucial for a sustainable transition of urban energy systems and the improvement of quality of life for citizens. We aim to develop a systematic classification and analysis of the barriers hindering successful implementation of smart energy city projects. Through an empirical approach, we investigated 43 communities implementing smart and sustainable energy city projects under the Sixth and Seventh Framework Programmes of the European Union. Validated through literature review, we identified 35 barriers categorized in policy, administrative, legal, financial, market, environmental, technical, social, and information-and-awareness dimensions. We prioritized these barriers, using a novel multi-dimensional methodology that simultaneously analyses barriers based on frequency, level of impact, causal relationship among barriers, origin, and scale. The results indicate that the key barriers are lacking or fragmented political support on the long term at the policy level, and lack of good cooperation and acceptance among project partners, insufficient external financial support, lack of skilled and trained personnel, and fragmented ownership at the project level. The outcome of the research should aid policy-makers to better understand and prioritize implementation barriers to develop effective action and policy interventions towards more successful implementation of smart energy city projects. - Highlights: • A solid empirical study on the implementation of European smart energy city projects. • We found 35 barriers in nine dimensions; e.g. policy, legal, financial, and social. • We suggested a new multi-dimensional methodology to prioritize barriers. • Lacking or fragmented political support on the long term is a key barrier. • We provided insights for action for project coordinators and policy makers.

Multiplicities in high energy interactions

International Nuclear Information System (INIS)

Derrick, M.

1984-01-01

Charged particle multiplicities in hadronic collision have been measured for all energies up to √s = 540 GeV in the center of mass. Similar measurements in e + e - annihilation cover the much smaller range - up to √s = 40 GeV. Data are also available from deep inelastic neutrino scattering up to √s approx. 10 GeV. The experiments measure the mean charged multiplicity , the rapidity density at y = O, and the distributions in prong number. The mean number of photons associated with the events can be used to measure the π 0 and eta 0 multiplicities. Some information is also available on the charged pion, kaon, and nucleon fractions as well as the K 0 and Λ 0 rates and for the higher energy data, the identically equal fraction. We review this data and consider the implications of extrapolations to SSC energies. 13 references

Energy Barriers and Hysteresis in Martensitic Phase Transformations

Science.gov (United States)

2008-08-01

glacial acetic acid (CH3COOH) and 10-15% perchloric acid (HCLO4) by volume, the cathode was stainless steel , the anode was stainless steel or Ti, the...Submitted to Acta Materialia Energy barriers and hysteresis in martensitic phase transformations Zhiyong Zhang, Richard D. James and Stefan Müller...hysteresis based on the growth from a small scale of fully developed austenite martensite needles. In this theory the energy of the transition layer plays a

A novel method for calculating the energy barriers for carbon diffusion in ferrite under heterogeneous stress

Science.gov (United States)

Tchitchekova, Deyana S.; Morthomas, Julien; Ribeiro, Fabienne; Ducher, Roland; Perez, Michel

2014-07-01

A novel method for accurate and efficient evaluation of the change in energy barriers for carbon diffusion in ferrite under heterogeneous stress is introduced. This method, called Linear Combination of Stress States, is based on the knowledge of the effects of simple stresses (uniaxial or shear) on these diffusion barriers. Then, it is assumed that the change in energy barriers under a complex stress can be expressed as a linear combination of these already known simple stress effects. The modifications of energy barriers by either uniaxial traction/compression and shear stress are determined by means of atomistic simulations with the Climbing Image-Nudge Elastic Band method and are stored as a set of functions. The results of this method are compared to the predictions of anisotropic elasticity theory. It is shown that, linear anisotropic elasticity fails to predict the correct energy barrier variation with stress (especially with shear stress) whereas the proposed method provides correct energy barrier variation for stresses up to ˜3 GPa. This study provides a basis for the development of multiscale models of diffusion under non-uniform stress.

A novel method for calculating the energy barriers for carbon diffusion in ferrite under heterogeneous stress

International Nuclear Information System (INIS)

Tchitchekova, Deyana S.; Morthomas, Julien; Perez, Michel; Ribeiro, Fabienne; Ducher, Roland

2014-01-01

A novel method for accurate and efficient evaluation of the change in energy barriers for carbon diffusion in ferrite under heterogeneous stress is introduced. This method, called Linear Combination of Stress States, is based on the knowledge of the effects of simple stresses (uniaxial or shear) on these diffusion barriers. Then, it is assumed that the change in energy barriers under a complex stress can be expressed as a linear combination of these already known simple stress effects. The modifications of energy barriers by either uniaxial traction/compression and shear stress are determined by means of atomistic simulations with the Climbing Image-Nudge Elastic Band method and are stored as a set of functions. The results of this method are compared to the predictions of anisotropic elasticity theory. It is shown that, linear anisotropic elasticity fails to predict the correct energy barrier variation with stress (especially with shear stress) whereas the proposed method provides correct energy barrier variation for stresses up to ∼3 GPa. This study provides a basis for the development of multiscale models of diffusion under non-uniform stress

A novel method for calculating the energy barriers for carbon diffusion in ferrite under heterogeneous stress

Energy Technology Data Exchange (ETDEWEB)

Tchitchekova, Deyana S. [IRSN, PSN, SEMIA, LPTM, Saint-Paul-Lez-Durance (France); Univ. Lyon, INSA Lyon, MATEIS, UMR CNRS 5510, Villeurbanne (France); Morthomas, Julien; Perez, Michel [Univ. Lyon, INSA Lyon, MATEIS, UMR CNRS 5510, Villeurbanne (France); Ribeiro, Fabienne [IRSN, PSN, SEMIA, LPTM, Saint-Paul-Lez-Durance (France); Ducher, Roland [IRSN, PSN, SAG, LETR, Saint-Paul-Lez-Durance (France)

2014-07-21

A novel method for accurate and efficient evaluation of the change in energy barriers for carbon diffusion in ferrite under heterogeneous stress is introduced. This method, called Linear Combination of Stress States, is based on the knowledge of the effects of simple stresses (uniaxial or shear) on these diffusion barriers. Then, it is assumed that the change in energy barriers under a complex stress can be expressed as a linear combination of these already known simple stress effects. The modifications of energy barriers by either uniaxial traction/compression and shear stress are determined by means of atomistic simulations with the Climbing Image-Nudge Elastic Band method and are stored as a set of functions. The results of this method are compared to the predictions of anisotropic elasticity theory. It is shown that, linear anisotropic elasticity fails to predict the correct energy barrier variation with stress (especially with shear stress) whereas the proposed method provides correct energy barrier variation for stresses up to ∼3 GPa. This study provides a basis for the development of multiscale models of diffusion under non-uniform stress.

11Li Breakup on 208 at energies around the Coulomb barrier.

Science.gov (United States)

Fernández-García, J P; Cubero, M; Rodríguez-Gallardo, M; Acosta, L; Alcorta, M; Alvarez, M A G; Borge, M J G; Buchmann, L; Diget, C A; Falou, H A; Fulton, B R; Fynbo, H O U; Galaviz, D; Gómez-Camacho, J; Kanungo, R; Lay, J A; Madurga, M; Martel, I; Moro, A M; Mukha, I; Nilsson, T; Sánchez-Benítez, A M; Shotter, A; Tengblad, O; Walden, P

2013-04-05

The inclusive breakup for the (11)Li + (208)Pb reaction at energies around the Coulomb barrier has been measured for the first time. A sizable yield of (9)Li following the (11)Li dissociation has been observed, even at energies well below the Coulomb barrier. Using the first-order semiclassical perturbation theory of Coulomb excitation it is shown that the breakup probability data measured at small angles can be used to extract effective breakup energy as well as the slope of B(E1) distribution close to the threshold. Four-body continuum-discretized coupled-channels calculations, including both nuclear and Coulomb couplings between the target and projectile to all orders, reproduce the measured inclusive breakup cross sections and support the presence of a dipole resonance in the (11)Li continuum at low excitation energy.

The role of multiple barriers in assuring waste package reliability

International Nuclear Information System (INIS)

Bradford, R.M.

1993-08-01

Yucca Mountain in southwestern Nevada is being studied as a potential repository site for the permanent storage of high-level nuclear waste. Regulators have set performance standards that the potential repository must meet in order to obtain regulatory approval. Nuclear Regulatory Commission (NRC) regulations state that containment of radioactivity must be ''substantially complete'' for the first 1000 years after closure of the facility. Thereafter, the acceptable annual limit on releases is 1/100,000 of each radionuclide remaining in the inventory after 1000 years. To demonstrate that the potential facility is in compliance with the regulations, it is necessary to obtain some understanding of the probability distribution of the cumulative quantity of releases by certain time points. This paper will discuss the probability distribution of waste container lifetimes and how the understanding of this distribution will play a role in finding the distribution of the release quantities over time. It will be shown that, for reasonable assumptions about the process of barrier failure, the reliability of a multiple-barrier container can be achieved and demonstrated much more readily than a container consisting of a single barrier. The discussion will focus primarily on the requirement of substantially complete containment for the first 1000 years

Barriers to efficiency improvement and fuel switching in Karnataka, India

International Nuclear Information System (INIS)

Reddy, A.

1991-01-01

Implementing energy efficiency changes requires a wide range measures. Improvements, therefore, require actions at the lowest level of the consumer, through the highest level of the global agencies. Due to the multiplicity of participants, however, barriers to achieving these improvements can arise at every level. The major barriers to improving energy efficiency in developing countries are defined and paths to overcome these challenges are identified. Topics of discussion include: energy consumers; end-use equipment manufacturers; end-use equipment providers; energy carrier producers and distributors; actual/potential cogenerators; financial institutions; government; and international, multilateral and industrialized country funding/aid agencies

The role of cooperatives in overcoming the barriers to adoption of renewable energy

International Nuclear Information System (INIS)

Viardot, Eric

2013-01-01

Recently, cooperatives have been created to promote the use of renewable energy (RE) most notably in Canada, the US, UK, Denmark or Germany. In order to develop the adoption of RE, the cooperatives have to seek to influence the behaviour of their members so that they switch from the use of traditional fossil energy to RE. This paper examines the various barriers to adoption of RE and the way cooperatives are circumventing those obstacles in order to develop the use of RE. This study surveyed a sample of 9 cooperatives from countries where governments are subsidizing the use of RE. The paper identifies a set of specific barriers to the adoption of RE by consumers. It also reveals that cooperatives effectively contribute to the uptake of RE with community-based social marketing initiatives that are lowering those barriers successfully. Those initiatives are related to educational communication, low prices, local offers with complementary services, and cooperative distribution. The paper put forwards a framework for the assessment of how each of those initiatives contributes to the diminishing of each of the barriers to adoption of RE. - Highlights: • We examine the barriers to adoption of renewable energy by RE cooperatives. • We have identified the main significant barriers to adoption of RE by consumers. • Cooperatives apply community-based marketing initiatives to ease the uptake of RE. • We evaluate how each marketing initiatives diminish the barriers to adoption of RE

Financing Solar Energy Systems with Energy Savings Performance Contracts in the Federal Sector: Results of a Survey on Barriers

Energy Technology Data Exchange (ETDEWEB)

Gee, R. C.; LaPorta, C.

1999-08-17

This report summarizes the findings of an investigation into financing solar energy systems for the Federal sector. The objectives of the investigation were (1) to identify the barriers that impede companies from using Energy Savings Performance Contracts (ESPCs) to develop solar energy projects for Federal facilities, and (2) to clarify the impacts of Federal contracting requirements on energy service companies' use of ESPCs. Twenty-four representatives of energy service companies agreed to be interviewed. Their responses indicate that these are the primary barriers to greater use of ESPCs: the relatively long payback periods for investments in solar technologies; the length of the ESPC process; the cost of certain contractual requirements regarding wages and financing; and a lack of knowledge about the actual cost and reliability of solar systems. The report proposes a number of actions the government could take to remove these barriers, including (1) streamlining and shortening the ESPC process and (2) doing more to inform both government agencies and energy service companies about the costs and benefits of solar systems.

Controlling Schottky energy barriers in organic electronic devices using self-assembled monolayers

Energy Technology Data Exchange (ETDEWEB)

Campbell, I.H.; Rubin, S.; Zawodzinski, T.A.; Kress, J.D.; Martin, R.L.; Smith, D.L. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Barashkov, N.N.; Ferraris, J.P. [The University of Texas at Dallas, Richardson, Texas 75083 (United States)

1996-11-01

We demonstrate tuning of Schottky energy barriers in organic electronic devices by utilizing chemically tailored electrodes. The Schottky energy barrier of Ag on poly[2-methoxy], 5-(2{prime}-ethyl-hexyloxy)- 1,4-phenylene was tuned over a range of more than 1 eV by using self-assembled monolayers (SAM{close_quote}s) to attach oriented dipole layers to the Ag prior to device fabrication. Kelvin probe measurements were used to determine the effect of the SAM{close_quote}s on the Ag surface potential. {ital Ab} {ital initio} Hartree-Fock calculations of the molecular dipole moments successfully describe the surface potential changes. The chemically tailored electrodes were then incorporated in organic diode structures and changes in the metal/organic Schottky energy barriers were measured using an electroabsorption technique. These results demonstrate the use of self-assembled monolayers to control metal/organic interfacial electronic properties. They establish a physical principle for manipulating the relative energy levels between two materials and demonstrate an approach to improve metal/organic contacts in organic electronic devices. {copyright} {ital 1996 The American Physical Society.}

Controlling Schottky energy barriers in organic electronic devices using self-assembled monolayers

International Nuclear Information System (INIS)

Campbell, I.H.; Rubin, S.; Zawodzinski, T.A.; Kress, J.D.; Martin, R.L.; Smith, D.L.; Barashkov, N.N.; Ferraris, J.P.

1996-01-01

We demonstrate tuning of Schottky energy barriers in organic electronic devices by utilizing chemically tailored electrodes. The Schottky energy barrier of Ag on poly[2-methoxy], 5-(2'-ethyl-hexyloxy)- 1,4-phenylene was tuned over a range of more than 1 eV by using self-assembled monolayers (SAM close-quote s) to attach oriented dipole layers to the Ag prior to device fabrication. Kelvin probe measurements were used to determine the effect of the SAM close-quote s on the Ag surface potential. Ab initio Hartree-Fock calculations of the molecular dipole moments successfully describe the surface potential changes. The chemically tailored electrodes were then incorporated in organic diode structures and changes in the metal/organic Schottky energy barriers were measured using an electroabsorption technique. These results demonstrate the use of self-assembled monolayers to control metal/organic interfacial electronic properties. They establish a physical principle for manipulating the relative energy levels between two materials and demonstrate an approach to improve metal/organic contacts in organic electronic devices. copyright 1996 The American Physical Society

Barriers and drivers for energy efficiency: Different perspectives from an exploratory study in the Netherlands

International Nuclear Information System (INIS)

Cagno, Enrico; Trianni, Andrea; Abeelen, Christiaan; Worrell, Ernst; Miggiano, Federica

2015-01-01

Highlights: • We investigated the perception of barriers and drivers and mechanisms regulating them. • Firms agree on the most important barriers and drivers. • Firms agree on the most critical decision-making steps and actors promoting drivers. • Major external actors perceive barriers, drivers and mechanisms differently. • Success of voluntary agreements depends on the link to other policy instruments. - Abstract: Increased energy efficiency represents a crucial opportunity for European industrial sustainability, but several barriers still need to be tackled. Thus, it is crucial to understand the existing mismatches between the perception of enterprises and what the major actors promoting energy efficiency believe enterprises suffer from and need within the decision-making process. To do so, we have performed an exploratory investigation analysing a set of manufacturing enterprises participating in the Dutch voluntary agreements. The study involved the major external actors, i.e. the national energy agency, governmental and industrial organisations, to map their views on the decision-making process. Results show that enterprises agree not only on the most important barriers and drivers, but also on the mechanisms underlying them. However, even a general common understanding of the barriers is disputed when major external actors are considered, as they only agree on the primary role of economic barriers. Mismatches appear when considering how single barriers affect the decision-making process and which drivers – and actors promoting them – need to be addressed. Although voluntary agreements represent the most popular instrument on energy efficiency in the Netherlands, they do not seem to be considered by small and medium-sized enterprises as a stimulus for improving energy efficiency. Crucial for future success are the link with other policy instruments, and the degree to which the instruments trigger the right drivers and barriers at the right

Examining barrier distributions and, in extension, energy derivative of probabilities for surrogate experiments

International Nuclear Information System (INIS)

Romain, P.; Duarte, H.; Morillon, B.

2012-01-01

The energy derivatives of probabilities are functions suited to a best understanding of certain mechanisms. Applied to compound nuclear reactions, they can bring information on fusion barrier distributions as originally introduced, and also, as presented here, on fission barrier distributions and heights. Extendedly, they permit to access the compound nucleus spin-parity states preferentially populated according to an entrance channel, at a given energy. (authors)

Energy shift and conduction-to-valence band transition mediated by a time-dependent potential barrier in graphene

Science.gov (United States)

Chaves, Andrey; da Costa, D. R.; de Sousa, G. O.; Pereira, J. M.; Farias, G. A.

2015-09-01

We investigate the scattering of a wave packet describing low-energy electrons in graphene by a time-dependent finite-step potential barrier. Our results demonstrate that, after Klein tunneling through the barrier, the electron acquires an extra energy which depends on the rate of change of the barrier height with time. If this rate is negative, the electron loses energy and ends up as a valence band state after leaving the barrier, which effectively behaves as a positively charged quasiparticle.

The role of confined collagen geometry in decreasing nucleation energy barriers to intrafibrillar mineralization.

Science.gov (United States)

Kim, Doyoon; Lee, Byeongdu; Thomopoulos, Stavros; Jun, Young-Shin

2018-03-06

Mineralization of collagen is critical for the mechanical functions of bones and teeth. Calcium phosphate nucleation in collagenous structures follows distinctly different patterns in highly confined gap regions (nanoscale confinement) than in less confined extrafibrillar spaces (microscale confinement). Although the mechanism(s) driving these differences are still largely unknown, differences in the free energy for nucleation may explain these two mineralization behaviors. Here, we report on experimentally obtained nucleation energy barriers to intra- and extrafibrillar mineralization, using in situ X-ray scattering observations and classical nucleation theory. Polyaspartic acid, an extrafibrillar nucleation inhibitor, increases interfacial energies between nuclei and mineralization fluids. In contrast, the confined gap spaces inside collagen fibrils lower the energy barrier by reducing the reactive surface area of nuclei, decreasing the surface energy penalty. The confined gap geometry, therefore, guides the two-dimensional morphology and structure of bioapatite and changes the nucleation pathway by reducing the total energy barrier.

Barriers to energy efficiency in small industry clusters: Multi-criteria-based prioritization using the analytic hierarchy process

International Nuclear Information System (INIS)

Nagesha, N.; Balachandra, P.

2006-01-01

The small scale industry (SSI) is an important component of Indian economy and a majority of SSI units tend to exist in geographical clusters. Energy efficiency is crucial for the survival and growth of energy intensive SSI clusters, not only to improve their competitiveness through cost reduction but also to minimize adverse environmental impacts. However, this is easier said than done due to the presence of a variety of barriers. The identification of relevant barriers and their appropriate prioritization in such clusters is a prerequisite to effectively tackle them. This paper identifies relevant barriers to energy efficiency and their dimensions in SSI clusters. Further, the barriers are prioritized based on the perceptions and experiences of entrepreneurs, the main stakeholders of SSIs, using the analytic hierarchy process (AHP). The field data from two energy intensive clusters of foundry and brick and tile in Karnataka (a state in India) reveal that the prioritization remained the same despite differences in the relative weights of barrier groups. The financial and economic barrier (FEB) and behavioural and personal barrier (BPB) have emerged as the top two impediments to energy efficiency improvements

On the economic analysis of problems in energy efficiency: Market barriers, market failures, and policy implications

International Nuclear Information System (INIS)

Sanstad, A.H.; Koomey, J.G.; Levine, M.D.

1993-01-01

In his recent paper in The Energy Journal, Ronald Sutherland argues that several so-called ''market barriers'' to energy efficiency frequently cited in the literature are not market failures in the conventional sense and are thus irrelevant for energy policy. We argue that Sutherland has inadequately analyzed the idea of market barrier and misrepresented the policy implications of microeconomics. We find that economic theory, correctly interpreted, does not provide for the categorical dismissal of market barriers. We explore important methodological issues underlying the debate over market barriers, and discuss the importance of reconciling the findings of non-economic social sciences with the economic analysis of energy demand and consumer decision-making. We also scrutinize Sutherland's attempt to apply finance theory to rationalize high implicit discount rates observed in energy-related choices, and find this use of finance theory to be inappropriate

On the economic analysis of problems in energy efficiency: Market barriers, market failures, and policy implications

Energy Technology Data Exchange (ETDEWEB)

Sanstad, A.H.; Koomey, J.G.; Levine, M.D.

1993-01-01

In his recent paper in The Energy Journal, Ronald Sutherland argues that several so-called ``market barriers`` to energy efficiency frequently cited in the literature are not market failures in the conventional sense and are thus irrelevant for energy policy. We argue that Sutherland has inadequately analyzed the idea of market barrier and misrepresented the policy implications of microeconomics. We find that economic theory, correctly interpreted, does not provide for the categorical dismissal of market barriers. We explore important methodological issues underlying the debate over market barriers, and discuss the importance of reconciling the findings of non-economic social sciences with the economic analysis of energy demand and consumer decision-making. We also scrutinize Sutherland`s attempt to apply finance theory to rationalize high implicit discount rates observed in energy-related choices, and find this use of finance theory to be inappropriate.

Market barriers to energy efficiency: A critical reappraisal of the rationale for public policies to promote energy efficiency

Energy Technology Data Exchange (ETDEWEB)

Golove, W.H.; Eto, J.H. [Lawrence Berkeley National Lab., CA (United States). Energy and Environment Div.

1996-03-01

This report reviews current perspectives on market barriers to energy efficiency. Ratepayer-funded utility energy-efficiency programs are likely to change in scope, size, and nature as the deregulation process proceeds; the authors research focuses on understanding to what extent some form of future intervention may be warranted and how they might judge the success of particular interventions, especially those funded by ratepayers. They find that challenges to the existence of market barriers have, for the most part, failed to provide a testable alternative explanation for evidence suggesting that there is a substantial ``efficiency gap`` between a consumer`s actual investments in energy efficiency and those that appear to be in the consumer`s own interest. They then suggest that differences of opinion about the appropriateness of public policies stem not from disputes about whether market barriers exist, but from different perceptions of the magnitude of the barriers, and the efficacy and (possibly unintended) consequences of policies designed to overcome them. They conclude that there are compelling justifications for future energy-efficiency policies. Nevertheless, in order to succeed, they must be based on a sound understanding of the market problems they seek to correct and a realistic assessment of their likely efficacy. This understanding can only emerge from detailed investigations of the current operation of individual markets.

Financing energy SMEs in Ghana and Senegal: Outcomes, barriers and prospects

International Nuclear Information System (INIS)

Haselip, James; Desgain, Denis; Mackenzie, Gordon

2014-01-01

The article presents the findings of primary research carried out in Ghana and Senegal, which revisited the main assumptions behind the African Rural Energy Enterprise Development (AREED) initiative (2002–2012), and other donor-backed programmes, designed to promote small and medium-sized energy enterprises (energy SMEs). These assumptions were (1) that the lack of affordable local financing presented the most significant barrier to setting up and expanding energy SMEs, and (2) that these barriers would be overcome by a ‘demonstration effect’ whereby successful businesses, supported by donor-backed programmes, could in turn influence the commercial financial sector to invest in energy SMEs, thus triggering a virtuous circle of growth and profitability. - Highlights: • Analysis of the AREED ‘demonstration effect’ in Senegal and Ghana. • Commercial financial backing for SMEs remains a serious challenge for entrepreneurs. • Structural issues that increase the financial risk of investing in energy SMEs. • High transaction costs of investing in SMEs. • Longer supply chains and slower pay-back periods for capital-intensive technologies

Measurement of blood-brain barrier permeability with positron emission tomography in patients with multiple sclerosis

International Nuclear Information System (INIS)

Fieschi, C.; Pozzilli, C.; Bernardi, S.; Bozzao, L.; Lenzi, G.L.; Picozzi, P.; Iannotti, F.; Conforti, P.

1988-01-01

The purpose of the investigation was to elucidate the role of positron emission tomography using 68 Ga-EDTA in the study of blood-brain barrier abnormalities associated with multiple sclerosis. 14 refs.; 1 figure

Method of estimating the leakage of multiple barriers in a radioactive materials shipping package

International Nuclear Information System (INIS)

Towell, R.H.; Kapoor, A.; Oras, J.J.

1997-01-01

This paper presents the results of a theoretical study of the performance of multiple leaky barriers in containing radioactive materials in a shipping package. The methods used are reasoned analysis and finite element modeling barriers. The finite element model is developed and evaluated with parameters set to bracket 6M configurations with three to six nested plastic jars, food-pack cans, and plastic bags inside Department of Transportation (DOT) Specification 2R inner containers with pipe thread closures. The results show that nested barriers reach the regulatory limit of 1x10 -6 A 2 /hr in 11 to 52 days, even though individually the barriers would exceed the regulatory limit by a factor of as much as 370 instantaneously. These times are within normal shipping times. The finite element model is conservative because it does not consider the deposition and sticking of the leaking radioactive material on the surfaces inside each boundary

Blood-Brain Barrier Permeability of Normal Appearing White Matter in Relapsing-Remitting Multiple Sclerosis

DEFF Research Database (Denmark)

Lund, Henrik; Krakauer, Martin; Skimminge, Arnold

2013-01-01

Background: Multiple sclerosis (MS) affects the integrity of the blood-brain barrier (BBB). Contrast-enhanced T1 weighted magnetic resonance imaging (MRI) is widely used to characterize location and extent of BBB disruptions in focal MS lesions. We employed quantitative T1 measurements before...

8B + 208Pb Elastic Scattering at Coulomb Barrier Energies

Science.gov (United States)

La Commara, M.; Mazzocco, M.; Boiano, A.; Boiano, C.; Manea, C.; Parascandolo, C.; Pierroutsakou, D.; Signorini, C.; Strano, E.; Torresi, D.; Yamaguchi, H.; Kahl, D.; Di Meo, P.; Grebosz, J.; Imai, N.; Hirayama, Y.; Ishiyama, H.; Iwasa, N.; Jeong, S. C.; Jia, H. M.; Kim, Y. H.; Kimura, S.; Kubono, S.; Lin, C. J.; Miyatake, H.; Mukai, M.; Nakao, T.; Nicoletto, M.; Sakaguchi, Y.; Sánchez-Benítez, A. M.; Soramel, F.; Teranishi, T.; Wakabayashi, Y.; Watanabe, Y. X.; Yang, L.; Yang, Y. Y.

2018-02-01

The scattering process of weakly-bound nuclei at Coulomb barrier energies provides deep insights on the reaction dynamics induced by exotic nuclei. Within this framework, we measured for the first time the scattering process of the short-lived Radioactive Ion Beam (RIB) 8B (Sp = 0.1375 MeV) from a 208Pb target at 50 MeV beam energy. The 8B RIB was produced by means of the in-flight facility CRIB (RIKEN, Japan) with an average intensity on target of 10 kHz and a purity about 25%. Elastically scattering ions were detected in the angular range θc.m. = 10°-160° by means of the detector array EXPADES. A preliminary optical model analysis indicates a total reaction cross section of about 1 b, a value, once reduced, 2-3 times larger than those obtained for the reactions induced by the stable weakly-bound projectiles 6,7Li on a 208Pb target in the energy range around the Coulomb barrier.

On the economic analysis of problems in energy efficiency: Market barriers, market failures, and policy implications

Energy Technology Data Exchange (ETDEWEB)

Sanstad, A.H.; Koomey, J.G.; Levine, M.D.

1993-01-01

In his recent paper in The Energy Journal, Ronald Sutherland argues that several so-called market barriers'' to energy efficiency frequently cited in the literature are not market failures in the conventional sense and are thus irrelevant for energy policy. We argue that Sutherland has inadequately analyzed the idea of market barrier and misrepresented the policy implications of microeconomics. We find that economic theory, correctly interpreted, does not provide for the categorical dismissal of market barriers. We explore important methodological issues underlying the debate over market barriers, and discuss the importance of reconciling the findings of non-economic social sciences with the economic analysis of energy demand and consumer decision-making. We also scrutinize Sutherland's attempt to apply finance theory to rationalize high implicit discount rates observed in energy-related choices, and find this use of finance theory to be inappropriate.

11Li Breakup on 208Pb at Energies Around the Coulomb Barrier

DEFF Research Database (Denmark)

Fernández-García, J.P.; Cubero, M.; Rodríguez-Gallardo, M.

2013-01-01

The inclusive breakup for the 11Li+208Pb reaction at energies around the Coulomb barrier has been measured for the first time. A sizable yield of 9Li following the 11Li dissociation has been observed, even at energies well below the Coulomb barrier. Using the first-order semiclassical perturbation...... theory of Coulomb excitation it is shown that the breakup probability data measured at small angles can be used to extract effective breakup energy as well as the slope of B(E1) distribution close to the threshold. Four-body continuum-discretized coupled-channels calculations, including both nuclear...... and Coulomb couplings between the target and projectile to all orders, reproduce the measured inclusive breakup cross sections and support the presence of a dipole resonance in the 11Li continuum at low excitation energy....

Barriers to the adoption of low carbon production: A multiple-case study of Chinese industrial firms

International Nuclear Information System (INIS)

Liu, Yong

2014-01-01

This study employs a multiple-case study method, identifies barriers to the adoption of low carbon production, and categorizes these barriers into four domains: structural, regulatory, cultural, and contextual. The two most frequently mentioned barriers were “lack of financial incentives to stimulate low carbon innovation” and “lack of a common definition of low carbon production”. The two least frequently mentioned barriers were “silos exist between planning and production” and “operational staff are often physically separated from planning staff, which isolates them from planning decisions”. Furthermore, contextual barriers were significantly related to structural and regulatory barriers, while regulatory barriers were significantly related to structural barriers. Larger firms tend to have a more structured organization and lower perceptions of the employment term barrier. However, larger structured organizations have been affected by a long history of a planning-oriented economy and hence tend to have inflexible hierarchical systems. In contrast, small firms have hierarchical systems with less effect on low carbon production than those of large enterprises. Another interesting trend is the direct size effect on cultural barriers, which is evident in a culture of risk aversion, as well as the lack of low carbon technology and the existence of silos between planning and production. - Highlights: • Barriers were categorized as structural, regulatory, cultural and contextual. • Contextual barriers were significantly related to structural and regulatory barriers. • Regulatory barriers were significantly related to structural barriers. • Firm size directly affected firm hierarchical systems and cultural barriers

Implementation of renewable energy technologies - Opportunities and barriers. Egypt country study

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The project used case studies of renewable energy implementation projects to analyse the reasons for success or failure of specific projects or technologies. In particular the study aimed to identify possibilities for 'removing' the main barriers and thus 'promoting' increased implementation of (RETs), and to 'generalise' the experiences from the case studies and produce results that can be disseminated and utilized further in a planned second phase. The specific objectives for Egypt Country Study were: 1) To determine, on the basis of analysis of the past experience, the barriers against implementation of RETs in Egypt, and to identify the favourable conditions and actions required for such implementation. 2) To apply the knowledge gained and results of the analysis of past projects for a detailed analysis of barriers to a chosen set of potential RETs implementation projects with view to success. 3) To identify specific RET projects for implementation including necessary actions to overcome identified barriers. The case study revealed that; for Domestic Solar Water Heating (DSWH) the main barriers are; the economic barriers followed by the awareness / information barriers, then the Technical and Institution barriers. For the PV rural electrification, the most important barriers are; the economic and financial barriers, the awareness and information barriers then the technical barriers. For the large-scale biogas systems, the main barriers are the institution and capacity, economic, policy and awareness / information respectively. According to the project results the main actions that could be taken to overcome the barriers and make use of the available opportunities are: Economic / Financial: 1) Creation of new financial schemes for the RETs applications components and systems. 2) Reducing the taxes and duties for the components and / or materials needed for Renewable Energy (RE) systems. 3) More government-supported market incentives to encourage further

Implementation of renewable energy technologies - Opportunities and barriers. Egypt country study

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The project used case studies of renewable energy implementation projects to analyse the reasons for success or failure of specific projects or technologies. In particular the study aimed to identify possibilities for 'removing' the main barriers and thus 'promoting' increased implementation of (RETs), and to 'generalise' the experiences from the case studies and produce results that can be disseminated and utilized further in a planned second phase. The specific objectives for Egypt Country Study were: 1) To determine, on the basis of analysis of the past experience, the barriers against implementation of RETs in Egypt, and to identify the favourable conditions and actions required for such implementation. 2) To apply the knowledge gained and results of the analysis of past projects for a detailed analysis of barriers to a chosen set of potential RETs implementation projects with view to success. 3) To identify specific RET projects for implementation including necessary actions to overcome identified barriers. The case study revealed that; for Domestic Solar Water Heating (DSWH) the main barriers are; the economic barriers followed by the awareness / information barriers, then the Technical and Institution barriers. For the PV rural electrification, the most important barriers are; the economic and financial barriers, the awareness and information barriers then the technical barriers. For the large-scale biogas systems, the main barriers are the institution and capacity, economic, policy and awareness / information respectively. According to the project results the main actions that could be taken to overcome the barriers and make use of the available opportunities are: Economic / Financial: 1) Creation of new financial schemes for the RETs applications components and systems. 2) Reducing the taxes and duties for the components and / or materials needed for Renewable Energy (RE) systems. 3) More government-supported market incentives

Overcoming financial barriers to wider use of renewable energy technology in Africa

International Nuclear Information System (INIS)

Davidson, O.R.; Turkson, J.

2001-01-01

Future energy demand in Africa will rise dramatically due to development desires and increased industrial needs. Coping with this demand will pose a serious challenge because of the economic and environmental constraints of the continent. Exploiting its vast renewable energy sources for this purpose will assist greatly, but financial and other barriers to the rapid growth of associated technologies are significant. This paper explores measures that can be implemented to reduce these financial barriers. The analyses, which are based on lessons from experiences in and out of the region, show that replicating and enhancing current initiatives along with the implementation of suggested policy options could substantially increase the use of renewable energy technologies in Africa. (author)

Cantilever piezoelectric energy harvester with multiple cavities

International Nuclear Information System (INIS)

S Srinivasulu Raju; M Umapathy; G Uma

2015-01-01

Energy harvesting employing piezoelectric materials in mechanical structures such as cantilever beams, plates, diaphragms, etc, has been an emerging area of research in recent years. The research in this area is also focused on structural tailoring to improve the harvested power from the energy harvesters. Towards this aim, this paper presents a method for improving the harvested power from a cantilever piezoelectric energy harvester by introducing multiple rectangular cavities. A generalized model for a piezoelectric energy harvester with multiple rectangular cavities at a single section and two sections is developed. A method is suggested to optimize the thickness of the cavities and the number of cavities required to generate a higher output voltage for a given cantilever beam structure. The performance of the optimized energy harvesters is evaluated analytically and through experimentation. The simulation and experimental results show that the performance of the energy harvester can be increased with multiple cavities compared to the harvester with a single cavity. (paper)

Exploring the facilitators and barriers to engagement in physical activity for people with multiple sclerosis.

Science.gov (United States)

Kayes, Nicola M; McPherson, Kathryn M; Schluter, Philip; Taylor, Denise; Leete, Marta; Kolt, Gregory S

2011-01-01

To explore the relationship that cognitive behavioural and other previously identified variables have with physical activity engagement in people with multiple sclerosis (MS). This study adopted a cross-sectional questionnaire design. Participants were 282 individuals with MS. Outcome measures included the Physical Activity Disability Survey--Revised, Cognitive and Behavioural Responses to Symptoms Questionnaire, Barriers to Health Promoting Activities for Disabled Persons Scale, Multiple Sclerosis Self-efficacy Scale, Self-Efficacy for Chronic Diseases Scales and Chalder Fatigue Questionnaire. Multivariable stepwise regression analyses found that greater self-efficacy, greater reported mental fatigue and lower number of perceived barriers to physical activity accounted for a significant proportion of variance in physical activity behaviour, over that accounted for by illness-related variables. Although fear-avoidance beliefs accounted for a significant proportion of variance in the initial analyses, its effect was explained by other factors in the final multivariable analyses. Self-efficacy, mental fatigue and perceived barriers to physical activity are potentially modifiable variables which could be incorporated into interventions designed to improve physical activity engagement. Future research should explore whether a measurement tool tailored to capture beliefs about physical activity identified by people with MS would better predict participation in physical activity.

Review of Renewable Energy Technologies in Zambian Households: Capacities and Barriers Affecting Successful Deployment

Directory of Open Access Journals (Sweden)

Priscilla Kachapulula-Mudenda

2018-05-01

Full Text Available Modern renewable energy has been hailed as one of the prerequisites for fostering green growth and the achievement of sustainable development. Despite efforts to promote the use of renewable energy in households, its adoption has remained fairly low, hence the need for an inquiry into household capabilities needed for the acquisition and adoption of renewable energy technologies. This paper reviews the requisite capacities of households for the adoption of renewable energy services and expounds on some of the barriers hampering renewable energy among households. It takes a desk research approach to analyse the capacities which should be possessed by Zambian households and possible barriers constraining the widespread deployment of renewable energy technologies. The findings reveal that there is a need for a broader, multidimensional understanding of access to renewable energy in order for deployment to be effective. Barriers to the successful adoption of clean energy technologies include underserved populations, policy inadequacies; an underexploited renewable energy sector and heavy reliance on a service-challenged hydro-power utility. Since most of the aforementioned challenges are institutional in nature, the paper concludes with a recommendation of a baseline assessment to understand knowledge, perceptions, attitudes and drivers for renewable energy technology adoption among households.

Technical Barriers, Gaps,and Opportunities Related to Home Energy Upgrade Market Delivery

Energy Technology Data Exchange (ETDEWEB)

Bianchi, Marcus V.A. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2011-11-01

This report outlines the technical barriers, gaps, and opportunities that arise in executing home energy upgrade market delivery approaches, as identified through research conducted by the U.S. Department of Energy's Building America program.

Summary of Gaps and Barriers for Implementing Residential Building Energy Efficiency Strategies

Energy Technology Data Exchange (ETDEWEB)

2010-08-01

This report presents the key gaps and barriers to implementing residential energy efficiency strategies in the U.S. market, as identified in sessions at the U.S. Department of Energy's Building America 2010 Residential Energy Efficiency Meeting held in Denver, Colorado, on July 20-22, 2010.

Internationalization as a strategy to overcome industry barriers-An assessment of the marine energy industry

International Nuclear Information System (INIS)

Lovdal, Nicolai; Neumann, Frank

2011-01-01

Research on conditions to develop new innovations within emerging renewable energy industries is often done with a national focus. However, recent research on international entrepreneurship has revealed that firms operate on international levels very early in their life time. Thus, based on former research on international entrepreneurship and case examples, we build the propositions that firms in the marine energy industry use internationalization as a strategy to overcome industry barriers. Our primary source of data is a unique dataset from a global survey of all the companies in the marine energy industry who are aiming to commercialize a wave or tidal energy device. This paper is organized in two steps: first we identified the most challenging industry barriers perceived by companies. Second we use these to form propositions which we assess through empirical data. The two most challenging barriers perceived by the companies are need for capital and need for supportive political schemes. Our findings reveal that internationalization certainly is a common strategy to access capital and attractive support schemes in foreign countries. The early internationalization has implications for researchers, managers and policy makers. - Research highlights: → Industry barriers identified as access to capital and supportive political schemes. → International entrepreneurship is used to overcome industry barriers. → Start-ups in emerging energy industries 'shop' national support schemes. → Future research to provide policy advice should adapt to the international reality. → Research based on a worldwide survey of wave and tidal energy device developers.

Internationalization as a strategy to overcome industry barriers-An assessment of the marine energy industry

Energy Technology Data Exchange (ETDEWEB)

Lovdal, Nicolai, E-mail: nicolai.lovdal@iot.ntnu.n [Industrial Economics and Technology Management, Norwegian University of Science and Technology, 7491 Trondheim (Norway); Neumann, Frank, E-mail: frank@wave-energy-centre.or [Wave Energy Centre, Av. Manuel Maia, 36, r/c Dto., 1000-201 Lisboa (Portugal)

2011-03-15

Research on conditions to develop new innovations within emerging renewable energy industries is often done with a national focus. However, recent research on international entrepreneurship has revealed that firms operate on international levels very early in their life time. Thus, based on former research on international entrepreneurship and case examples, we build the propositions that firms in the marine energy industry use internationalization as a strategy to overcome industry barriers. Our primary source of data is a unique dataset from a global survey of all the companies in the marine energy industry who are aiming to commercialize a wave or tidal energy device. This paper is organized in two steps: first we identified the most challenging industry barriers perceived by companies. Second we use these to form propositions which we assess through empirical data. The two most challenging barriers perceived by the companies are need for capital and need for supportive political schemes. Our findings reveal that internationalization certainly is a common strategy to access capital and attractive support schemes in foreign countries. The early internationalization has implications for researchers, managers and policy makers. - Research highlights: {yields} Industry barriers identified as access to capital and supportive political schemes. {yields} International entrepreneurship is used to overcome industry barriers. {yields} Start-ups in emerging energy industries 'shop' national support schemes. {yields} Future research to provide policy advice should adapt to the international reality. {yields} Research based on a worldwide survey of wave and tidal energy device developers.

Effect of barrier height and indium composition on the internal quantum efficiency of (In)AlGaN multiple quantum well structures

Energy Technology Data Exchange (ETDEWEB)

Ledentsov, Nikolay Jr.; Reich, Christoph; Mehnke, Frank; Kuhn, Christian; Wernicke, Tim; Kolbe, Tim; Lobo Ploch, Neysha; Rass, Jens [Institute of Solid State Physics, Technische Universitaet Berlin (Germany); Kueller, Viola [Ferdinand-Braun-Institut, Berlin (Germany); Kneissl, Michael [Institute of Solid State Physics, Technische Universitaet Berlin (Germany); Ferdinand-Braun-Institut, Berlin (Germany)

2013-07-01

We studied (In)AlGaN multiple quantum wells (MQWs) emitting in the UV-B spectral region with photoluminescence and electroluminescence spectroscopy. The internal quantum efficiency (IQE) was determined by temperature dependent measurements (5 K-300 K). The quantum confined Stark effect (QCSE) was investigated by studying the shift of the emission energy with increasing excitation power density. In the first series, Al{sub 0.27}Ga{sub 0.73}N MQWs with different Al{sub x}Ga{sub 1-x}N barriers (0.32barriers decreased the IQE due to a stronger QCSE. In the second series, quaternary InAlGaN QWs were investigated. Due to In incorporation, room temperature emission energy shifted from 4.3 eV to 3.9 eV. At low temperatures two peaks were observed. The lower energetic peak was attributed to In-rich clusters. Influence of the In segregation is discussed.

Using normalisation process theory to understand barriers and facilitators to implementing mindfulness-based stress reduction for people with multiple sclerosis.

Science.gov (United States)

Simpson, Robert; Simpson, Sharon; Wood, Karen; Mercer, Stewart W; Mair, Frances S

2018-01-01

Objectives To study barriers and facilitators to implementation of mindfulness-based stress reduction for people with multiple sclerosis. Methods Qualitative interviews were used to explore barriers and facilitators to implementation of mindfulness-based stress reduction, including 33 people with multiple sclerosis, 6 multiple sclerosis clinicians and 2 course instructors. Normalisation process theory provided the underpinning conceptual framework. Data were analysed deductively using normalisation process theory constructs (coherence, cognitive participation, collective action and reflexive monitoring). Results Key barriers included mismatched stakeholder expectations, lack of knowledge about mindfulness-based stress reduction, high levels of comorbidity and disability and skepticism about embedding mindfulness-based stress reduction in routine multiple sclerosis care. Facilitators to implementation included introducing a pre-course orientation session; adaptations to mindfulness-based stress reduction to accommodate comorbidity and disability and participants suggested smaller, shorter classes, shortened practices, exclusion of mindful-walking and more time with peers. Post-mindfulness-based stress reduction booster sessions may be required, and objective and subjective reports of benefit would increase clinician confidence in mindfulness-based stress reduction. Discussion Multiple sclerosis patients and clinicians know little about mindfulness-based stress reduction. Mismatched expectations are a barrier to participation, as is rigid application of mindfulness-based stress reduction in the context of disability. Course adaptations in response to patient needs would facilitate uptake and utilisation. Rendering access to mindfulness-based stress reduction rapid and flexible could facilitate implementation. Embedded outcome assessment is desirable.

Removing barriers to women entrepreneurs’ engagement in decentralized sustainable energy solutions for the poor

Directory of Open Access Journals (Sweden)

Yannick Glemarec

2016-01-01

Full Text Available  Rapidly falling renewable technology costs and new business models mean that decentralized energy solutions hold great promise to accelerate universal sustainable energy access. Across developing countries, women are typically the primary household energy managers. Close to their customers, women entrepreneurs have the potential to lower customer acquisition and servicing costs and drive these new decentralized solutions. However, they remain under-represented in the industry. This paper attempts to understand the root causes of this gender gap. It formulates the research hypothesis that market transformation policies intended to reduce investment risks to accelerate energy access may not benefit men and women entrepreneurs equally because of the existing structural barriers that women face. To test this hypothesis, the paper conducts a gender sensitive investment barrier and risk analysis, overlaid onto an existing gender neutral taxonomy of investment barriers and risks for decentralized sustainable energy solutions. A key finding is that for women entrepreneurs, existing structural impediments to gender equality translate into additional investment barriers as well as increased likelihood of occurrence and severity of the financial impact of generic investment risks. The paper offers an illustrative theory of change to facilitate a dialogue on the specific interventions needed to address these gender differentiated risks locally. It concludes that market transformation efforts for universal sustainable energy access must include targeted policy measures to ensure equal benefits to men and women entrepreneurs, and optimize the use of public resources to catalyze private investment and reduce poverty.

Numerical evaluation of energy barriers and magnetic relaxation in interacting nanostructured magnetic systems

International Nuclear Information System (INIS)

Chubykalo-Fesenko, Oksana A.; Chantrell, Roy W.

2004-01-01

We discuss a model to quantify long-time thermally induced magnetization reversal in magnetic systems with distributed properties. Two algorithms, based on kinetic and Metropolis Monte Carlo are introduced. While the former requires the constant recalculation of all energy barriers and is useful when the interactions are weak, the latter uses the Metropolis Monte Carlo to estimate the magnetization trajectory and, consequently, only the most probable transition rates are evaluated. The ridge optimization method is used to evaluate the energy barriers in a multidimensional energy landscape. The algorithms are applied to a granular system modeled by means of Voronoi polyhedra and having random in-plane anisotropy

Potential and barrier study. Energy efficiency of Norwegian homes; Potensial- og barrierestudie. Energieffektivisering av norske boliger

Energy Technology Data Exchange (ETDEWEB)

Mjoenes, Christian; Pettersen, Folke Vogn Haug; Kristoffersen, Bjoerge Sandberg; Birkeland, Bjoern Mangor; Essen, Jan von; Haarberg; Karl Johan

2012-01-15

On behalf of Enova SF, Prognosesenteret AS and Entelligens AS carried out a potential and barrier study of energy efficiency of the Norwegian housing stock. The study made use of newer and known studies of the Norwegian housing stock, known and documented barriers to energy efficiency, and new and extensive studies of several topics which have only been partially or never explored before. Through unique analysis and a case-based approach, it revealed a real energy efficiency potential in Norwegian homes with known technology and revealed representativeness, relevance, strength and extent of the barriers that prevent that one can realize most of the technical energy efficiency potential in the Norwegian housing stock. (eb)

Mean charged hadron multiplicities in high-energy collisions

Energy Technology Data Exchange (ETDEWEB)

Albini, E [Istituto di Matematica dell' Universita Cattolica di Brescia (Italy); Capiluppi, P; Giacomelli, G; Rossi, A M [Bologna Univ. (Italy). Istituto di Fisica

1976-03-01

A collection of mean charged hadron multiplicities per inelastic collision in various high-energy processes is presented. An extensive list of fits of as a function of energy is presented and discussed. As the energy increases the multiplicities for different collisions tend to a unique curve, independent of the type of colliding particles.

46 CFR 111.10-5 - Multiple energy sources.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Multiple energy sources. 111.10-5 Section 111.10-5...-GENERAL REQUIREMENTS Power Supply § 111.10-5 Multiple energy sources. Failure of any single generating set energy source such as a boiler, diesel, gas turbine, or steam turbine must not cause all generating sets...

Driving forces and barriers to improved energy performance of buildings: an analysis of energy performance of Swedish buildings, 2000-2006

Energy Technology Data Exchange (ETDEWEB)

Fuglseth, Bente Beckstroem

2008-06-15

The building sector is responsible for a substantial part of energy use and green house gas emissions in Europe. This report explores driving forces and barriers to improved energy performance of buildings, using the Swedish building sector as a case. The development of energy performance of buildings in Sweden from 2000 until 2006 is explored by applying a threefold understanding of energy performance of buildings: substitution from fossil fuels to renewable energy, conversion from electrical heating to thermal energy and reduction in energy demand. Three explanatory approaches are used to analyse driving forces and barriers to improved energy performance: the techno-economic approach stresses the physical aspects of infrastructure and technologies, the institutional approach emphasizes the role of institutional factors, while the regulative approach focuses on formal rules and laws. The study concludes that all factors have promoted substitution of fossil fuels with renewable energy, while they have prevented conversion from electrical heating to thermal energy and reduction in energy demand. (author). 95 refs

Modeling and Characteristic Analysis of Wireless Ultrasonic Vibration Energy Transmission Channels through Planar and Curved Metal Barriers

Directory of Open Access Journals (Sweden)

DingXin Yang

2018-01-01

Full Text Available Wireless ultrasonic vibration energy transmission systems through metal barriers based on piezoelectric transducers have drawn a lot of focus due to the advantage of nonpenetration of the barriers, thus maintaining the integrity of sealed structures. It is meaningful to investigate appropriate modeling methods and to characterize such wireless ultrasonic energy transmission channels with different geometric shapes. In this paper, equivalent circuit modeling and finite element modeling methods are applied to the planar metal barrier channel, and a 3-dimensional finite element modeling method is applied to the cylindrical metallic barrier channel. Meanwhile, the experimental setup is established and measurements are carried out to validate the effectiveness of the corresponding modeling methods. The results show that Leach’s equivalent circuit modeling method and finite element modeling method are nearly similarly effective in characterizing the planar metal barrier channel. But for a cylindrical metal barrier, only the three-dimensional finite element modeling method is effective. Furthermore, we found that, for the planar barrier, the effect of standing waves on the efficiency of wireless energy transmission is dominated. But for the curved barrier, only the resonant phenomenon of the piezoelectric transducer exists.

Renewable energy in South Africa: Potentials, barriers and options for support

International Nuclear Information System (INIS)

Pegels, Anna

2010-01-01

The challenge of transforming entire economies is enormous; even more so if a country is as fossil fuel based and emission intensive as South Africa. However, in an increasingly carbon constrained world and already now facing climate change impacts South Africa has to reduce greenhouse gas emissions intensity soon and decidedly. The South African electricity sector is a vital part of the economy and at the same time contributes most to the emissions problem. First steps have been taken by the South African government to enhance energy efficiency and promote renewable energy, however, they fail to show large-scale effects. This paper seeks to identify the relevant barriers to renewable energy investments and, based on experience from other countries, provide policy recommendations. The major barrier identified in the paper is based on the economics of renewable energy technologies, i.e. their cost and risk structures, two main factors in investment planning. As a solution, the South African government introduced several renewable energy support measures, such as a feed-in tariff. The paper discusses the potential and possible shortcomings of this and other existing support schemes and identifies complementing measures on a national scale.

Modeling barriers of solid waste to energy practices: An Indian perspective

International Nuclear Information System (INIS)

Bag, S.; Mondal, N.; Dubey, R.

2016-01-01

In recent years managing solid wastes has been one of the burning problems in front of state and local municipal authorities. This is mainly due to scarcity of lands for landfill sites. In this context experts suggest that conversion of solid waste to energy and useful component is the best approach to reduce space and public health related problems. The entire process has to be managed by technologies that prevent pollution and protect the environment and at the same time minimize the cost through recovery of energy. Energy recovery in the form of electricity, heat and fuel from the waste using different technologies is possible through a variety of processes, including incineration, gasification, pyrolysis and anaerobic digestion. These processes are often grouped under “Waste to Energy technologies”. The objective of the study is twofold. First authors assessed the current status of solid waste management practices in India. Secondly the leading barriers are identified and Interpretive structural modeling technique and MICMAC analysis is performed to identify the contextual interrelationships between leading barriers influencing the solid waste to energy programs in the country. Finally the conclusions are drawn which will assist policy makers in designing sustainable waste management programs.

Renewable energy in South Africa. Potentials, barriers and options for support

Energy Technology Data Exchange (ETDEWEB)

Pegels, Anna [German Development Institute/Deutsches Institut fuer Entwicklungspolitik, Tulpenfeld 6, 53113 Bonn (Germany)

2010-09-15

The challenge of transforming entire economies is enormous; even more so if a country is as fossil fuel based and emission intensive as South Africa. However, in an increasingly carbon constrained world and already now facing climate change impacts South Africa has to reduce greenhouse gas emissions intensity soon and decidedly. The South African electricity sector is a vital part of the economy and at the same time contributes most to the emissions problem. First steps have been taken by the South African government to enhance energy efficiency and promote renewable energy, however, they fail to show large-scale effects. This paper seeks to identify the relevant barriers to renewable energy investments and, based on experience from other countries, provide policy recommendations. The major barrier identified in the paper is based on the economics of renewable energy technologies, i.e. their cost and risk structures, two main factors in investment planning. As a solution, the South African government introduced several renewable energy support measures, such as a feed-in tariff. The paper discusses the potential and possible shortcomings of this and other existing support schemes and identifies complementing measures on a national scale. (author)

Renewable energy in South Africa: Potentials, barriers and options for support

Energy Technology Data Exchange (ETDEWEB)

Pegels, Anna, E-mail: anna.pegels@die-gdi.d [German Development Institute/Deutsches Institut fuer Entwicklungspolitik, Tulpenfeld 6, 53113 Bonn (Germany)

2010-09-15

The challenge of transforming entire economies is enormous; even more so if a country is as fossil fuel based and emission intensive as South Africa. However, in an increasingly carbon constrained world and already now facing climate change impacts South Africa has to reduce greenhouse gas emissions intensity soon and decidedly. The South African electricity sector is a vital part of the economy and at the same time contributes most to the emissions problem. First steps have been taken by the South African government to enhance energy efficiency and promote renewable energy, however, they fail to show large-scale effects. This paper seeks to identify the relevant barriers to renewable energy investments and, based on experience from other countries, provide policy recommendations. The major barrier identified in the paper is based on the economics of renewable energy technologies, i.e. their cost and risk structures, two main factors in investment planning. As a solution, the South African government introduced several renewable energy support measures, such as a feed-in tariff. The paper discusses the potential and possible shortcomings of this and other existing support schemes and identifies complementing measures on a national scale.

Barriers and Potential Solutions for Energy Renovation of Buildings in Denmark

DEFF Research Database (Denmark)

Meyer, Niels I; Mathiesen, Brian vad; Hvelplund, Frede

2014-01-01

the supply and demand side for heat, electricity and transport. Implementing such Smart Energy Systems requires integrated strategic energy planning on the national and local level. With the fundamental changes in the energy supply technologies expected during the coming years, it is important to synchronize...... investments in energy conservation measures with investments in the supply side, in order to avoid overinvestment in supply systems and thus to minimize the total costs of the transformation to Smart Energy Systems. This paper highlights some of the most important barriers for renovation of existing buildings...

Pair transfer processes probed at deep sub barrier energies

International Nuclear Information System (INIS)

Corradi, L.; Mason, P.; Fioretto, E.; Michelagnoli, C.; Stefanini, A.M.; Valiente-Dobon, J.J.; Szinler, S.; Jelavic-Malenica, D.; Soic, N.; Pollarolo, G.; Farnea, E.; Montagnoli, G.; Montanari, D.; Scarlassara, F.; Ur, C.A.; Gadea, A.; Haas, F.; Marginean, N.

2011-01-01

Multinucleon transfer cross sections in the system 40 Ca+ 96 Zr have been measured at bombarding energies ranging from the Coulomb barrier to ∼ 25% below. Target-like (lighter) recoils in inverse kinematics have been completely identified in A,Z and Q-value with the large solid angle magnetic spectrometer PRISMA. The experimental slopes of the neutron transfer probabilities at large internuclear separation are consistent with the values derived from the binding energies. A phenomenological interpretation of the transfer probabilities indicates the presence of enhanced values for the even number of neutron transfers. (authors)

Response of wave-dominated and mixed-energy barriers to storms

NARCIS (Netherlands)

Masselink, G.; Heteren, S. van

2014-01-01

Wave-dominated and mixed-energy barriers are extremely dynamic landforms, responding to processes operating over a spectrum of time scales, ranging from daily-to-monthly fluctuations related to storm and post-storm conditions, to century-to-millennium-scale evolution driven by relative sea-level

Socio-cultural barriers to the development of a sustainable energy system - the case of hydrogen

DEFF Research Database (Denmark)

Petersen, Lars Kjerulf; Andersen, Anne Holst

Any transition to a more sustainable energy system, radically reducing greenhouse gas emissions, is bound to run in to a host of different barriers - technological and economic, but also socio-cultural. This will also be the case for any large-scale application of hydrogen as energy carrier......, especially if the system is going to be based on renewable energy sources. The aim of these research notes is to review and discuss major socio-cultural barriers to new forms of energy supply in general and to hydrogen specifically. Reaching sufficient reductions in greenhouse gas emissions may require more...

Anisotropic Lithium Insertion Behavior in Silicon Nanowires: Binding Energy, Diffusion Barrier, and Strain Effect

KAUST Repository

Zhang, Qianfan; Cui, Yi; Wang, Enge

2011-01-01

Silicon nanowires (SiNWs) have recently been shown to be promising as high capacity lithium battery anodes. SiNWs can be grown with their long axis along several different crystallographic directions. Due to distinct atomic configuration and electronic structure of SiNWs with different axial orientations, their lithium insertion behavior could be different. This paper focuses on the characteristics of single Li defects, including binding energy, diffusion barriers, and dependence on uniaxial strain in [110], [100], [111], and [112] SiNWs. Our systematic ab initio study suggests that the Si-Li interaction is weaker when the Si-Li bond direction is aligned close to the SiNW long axis. This results in the [110] and [111] SiNWs having the highest and lowest Li binding energy, respectively, and it makes the diffusion barrier along the SiNW axis lower than other pathways. Under external strain, it was found that [110] and [001] SiNWs are the most and least sensitive, respectively. For diffusion along the axial direction, the barrier increases (decreases) under tension (compression). This feature results in a considerable difference in the magnitude of the energy barrier along different diffusion pathways. © 2011 American Chemical Society.

Anisotropic Lithium Insertion Behavior in Silicon Nanowires: Binding Energy, Diffusion Barrier, and Strain Effect

KAUST Repository

Zhang, Qianfan

2011-05-19

Silicon nanowires (SiNWs) have recently been shown to be promising as high capacity lithium battery anodes. SiNWs can be grown with their long axis along several different crystallographic directions. Due to distinct atomic configuration and electronic structure of SiNWs with different axial orientations, their lithium insertion behavior could be different. This paper focuses on the characteristics of single Li defects, including binding energy, diffusion barriers, and dependence on uniaxial strain in [110], [100], [111], and [112] SiNWs. Our systematic ab initio study suggests that the Si-Li interaction is weaker when the Si-Li bond direction is aligned close to the SiNW long axis. This results in the [110] and [111] SiNWs having the highest and lowest Li binding energy, respectively, and it makes the diffusion barrier along the SiNW axis lower than other pathways. Under external strain, it was found that [110] and [001] SiNWs are the most and least sensitive, respectively. For diffusion along the axial direction, the barrier increases (decreases) under tension (compression). This feature results in a considerable difference in the magnitude of the energy barrier along different diffusion pathways. © 2011 American Chemical Society.

Organizational human factors as barriers to energy efficiency in electrical motors systems in industry

International Nuclear Information System (INIS)

Sola, Antonio Vanderley Herrero; Augusto de Paula, Xavier Antonio

2007-01-01

This paper presents a study accomplished in the State of Parana in Southern Brazil, aiming at verifying the correlation between organizational human factors (OHF) and the level of energy losses in organizations. The purpose is to subsidize the formularization of institutional policies in organizations to improve the energy efficiency in the productive sector. The research was carried out in ten industries of the following sectors: pulp and paper; food; wood and chemical products. The losses of electric energy were determined in motor systems with the aid of a mathematical model and the evaluation of 27 OHF identified in the literature review was made with the supervisors in the industries by means of a structurized questionnaire. Seven OHF had presented significant correlation with energy losses and six of them are inversely proportional to the losses, in accordance with linear regression analysis. The inversely proportional factors to the losses also with significant correlation are considered determinative OHF and constitute barriers for energy efficiency in organizations. These barriers are linked with the following organizational areas: management system; education of employees; strategical vision. The study recommends the implementation of the determinative OHF in organizations as a way to transpose the human barriers for energy efficiency

The congruence energy: a contribution to nuclear masses, deformation energies and fission barriers

International Nuclear Information System (INIS)

Myers, W.D.; Swiatecki, W.J.

1997-01-01

The difference between measured binding energies and those calculated using a shell- and pairing-corrected Thomas-Fermi model can be described approximately by C(I)=-10 exp(-4.2 vertical stroke I vertical stroke) MeV, where I=(N-Z)/A. Our interpretation of this extra binding is in terms of the granularity of quantal nucleonic density distributions, which leads to a stronger interaction for a neutron and proton with congruent nodal structures of their wave functions. The predicted doubling of this congruence energy in fission is supported by an analysis of measured fission barriers and by a study of wave functions in a dividing Hill-Wheeler box potential. A semi-empirical formula for the shape-dependent congruence energy is described. (orig.)

Organizational, interface, and financial barriers to the commercial development of community energy systems

Energy Technology Data Exchange (ETDEWEB)

Schladale, R.; Ritschard, R.

1979-12-01

The scope of this analysis was limited to systems producing electricity - the output of a community energy system typically falling in the range 10 kW to 150 MW. The purpose of this study was to identify the barriers that groups and individuals will face when attempting to commercialize community energy systems. Three particular classes of barriers were investigated: those within the organization attempting the commercialization, those that arise from attempts to link the community system with an electric utility, and those that impede the flow of investment capital into community energy systems. In summary, three general observations regarding community energy systems may be distilled from this study. First, although many barriers exist to the commercialization of the systems, few if any appear unresolvable. Perhaps most challenginng will be the problem of expanding the use of cogeneration and municipal sold waste while at the same time maintaining or improving ambient air quality. Second, the financial subsidies required to make community systems competitive are not extraordinary. Indeed, with the exception of photovoltaics they should not amount to more than about 10% of capital cost of the new systems, and mass production may eliminate the need for subsidies altogether at some point in the future. Third, the administrative and regulatory procedures required to make community energy systems viable appear to be taking shape in a positive and timely fashion.

Negotiating EU CO2/energy taxation. Political economic driving forces and barriers

International Nuclear Information System (INIS)

Klok, Jacob

2001-11-01

The primary objective of this project is to identify the main political economic driving forces behind and barriers against the creation of an EU agreement on CO 2 /energy taxation. The analysis is based on a theoretical framework for understanding European integration and on detailed historical investigations into a process of EU negotiations concerning CO 2 /energy taxation that took place from the 1980s to 1994. Following the historical analysis of political economic driving forces and barriers, some overall perspectives on possible future developments within the field of EU CO 2 /energy taxation are finally advanced. The secondary objective of the project is to consider the possible effects on the EU negotiation process of Danish efforts to push the CO 2 /energy tax proposal from the late 1980s to 994. This analysis is based on the preceding historical analysis of the EU negotiation process, as well as further investigations into the national Danish development within the field of CO 2 /energy taxation, including accounts of Denmark's particular relations with the EU during the period in question. Finally, based on the likely future developments in the field EU CO 2 /energy taxation. Denmark's strategic opportunities are outlined. (BA)

Energy barriers between metastable states in first-order quantum phase transitions

Science.gov (United States)

Wald, Sascha; Timpanaro, André M.; Cormick, Cecilia; Landi, Gabriel T.

2018-02-01

A system of neutral atoms trapped in an optical lattice and dispersively coupled to the field of an optical cavity can realize a variation of the Bose-Hubbard model with infinite-range interactions. This model exhibits a first-order quantum phase transition between a Mott insulator and a charge density wave, with spontaneous symmetry breaking between even and odd sites, as was recently observed experimentally [Landig et al., Nature (London) 532, 476 (2016), 10.1038/nature17409]. In the present paper, we approach the analysis of this transition using a variational model which allows us to establish the notion of an energy barrier separating the two phases. Using a discrete WKB method, we then show that the local tunneling of atoms between adjacent sites lowers this energy barrier and hence facilitates the transition. Within our simplified description, we are thus able to augment the phase diagram of the model with information concerning the height of the barrier separating the metastable minima from the global minimum in each phase, which is an essential aspect for the understanding of the reconfiguration dynamics induced by a quench across a quantum critical point.

Overcoming multiple gastrointestinal barriers by bilayer modified hollow mesoporous silica nanocarriers.

Science.gov (United States)

Wang, Ying; Zhao, Yating; Cui, Yu; Zhao, Qinfu; Zhang, Qiang; Musetti, Sara; Kinghorn, Karina A; Wang, Siling

2018-01-01

Oral administration of nanocarriers remains a significant challenge in the pharmaceutical sciences. The nanocarriers must efficiently overcome multiple gastrointestinal barriers including the harsh gastrointestinal environment, the mucosal layer, and the epithelium. Neutral hydrophilic surfaces are reportedly necessary for mucus permeation, but hydrophobic and cationic surfaces are important for efficient epithelial absorption. To accommodate these conflicting surface property requirements, we developed a strategy to modify nanocarrier surfaces with cationic cell-penetrating peptides (CPP) concealed by a hydrophilic succinylated casein (SCN) layer. SCN is a mucus-inert natural material specifically degraded in the intestine, thus protecting nanocarriers from the harsh gastric environment, facilitating their mucus permeation, and inducing exposure of CPPs after degradation for further effective transepithelial transport. Quantum dots doped hollow silica nanoparticles (HSQN) with a diameter around 180 nm was used as the nanocarrier and demonstrated as high as 50% loading efficacy of paclitaxel, a model drug with poor solubility and permeability. The dual layer modification strategy prevented premature drug leakage in stomach and maintained high mucus permeation (the trajectory spanned 9-fold larger area than single CPP modification). After intestinal degradation of SCN by trypsin, these nanocarriers exhibited strong interaction with epithelial membranes and a 5-fold increase in cellular uptake. Significant transepithelial transport and intestinal distribution were also observed for this dual-modified formulation. A pharmacokinetics study on the paclitaxel-loaded nanocarrier found 40% absolute bioavailability and 7.8-fold higher AUC compared to oral Taxol®. Compared with single CPP modified nanocarriers, our formulation showed increased in vivo efficacy and tumor accumulation of the model drug with negligible intestinal toxicity. In summary, sequential modification

Current-induced changes of migration energy barriers in graphene and carbon nanotubes

Science.gov (United States)

Obodo, J. T.; Rungger, I.; Sanvito, S.; Schwingenschlögl, U.

2016-05-01

An electron current can move atoms in a nanoscale device with important consequences for the device operation and breakdown. We perform first principles calculations aimed at evaluating the possibility of changing the energy barriers for atom migration in carbon-based systems. In particular, we consider the migration of adatoms and defects in graphene and carbon nanotubes. Although the current-induced forces are large for both the systems, in graphene the force component along the migration path is small and therefore the barrier height is little affected by the current flow. In contrast, the same barrier is significantly reduced in carbon nanotubes as the current increases. Our work also provides a real-system numerical demonstration that current-induced forces within density functional theory are non-conservative.An electron current can move atoms in a nanoscale device with important consequences for the device operation and breakdown. We perform first principles calculations aimed at evaluating the possibility of changing the energy barriers for atom migration in carbon-based systems. In particular, we consider the migration of adatoms and defects in graphene and carbon nanotubes. Although the current-induced forces are large for both the systems, in graphene the force component along the migration path is small and therefore the barrier height is little affected by the current flow. In contrast, the same barrier is significantly reduced in carbon nanotubes as the current increases. Our work also provides a real-system numerical demonstration that current-induced forces within density functional theory are non-conservative. Electronic supplementary information (ESI) available. See DOI: 10.1039/C6NR00534A

Barriers to Energy Efficiency and the Uptake of Green Revolving Funds in Canadian Universities

Science.gov (United States)

Maiorano, John; Savan, Beth

2015-01-01

Purpose: The purpose of this paper is to investigate the barriers to the implementation of energy efficiency projects in Canadian universities, including access to capital, bounded rationality, hidden costs, imperfect information, risk and split incentives. Methods to address these barriers are investigated, including evaluating the efficacy of…

Multiple-energy Techniques in Industrial Computerized Tomography

Science.gov (United States)

Schneberk, D.; Martz, H.; Azevedo, S.

1990-08-01

Considerable effort is being applied to develop multiple-energy industrial CT techniques for materials characterization. Multiple-energy CT can provide reliable estimates of effective Z (Z{sub eff}), weight fraction, and rigorous calculations of absolute density, all at the spatial resolution of the scanner. Currently, a wide variety of techniques exist for CT scanners, but each has certain problems and limitations. Ultimately, the best multi-energy CT technique would combine the qualities of accuracy, reliability, and wide range of application, and would require the smallest number of additional measurements. We have developed techniques for calculating material properties of industrial objects that differ somewhat from currently used methods. In this paper, we present our methods for calculating Z{sub eff}, weight fraction, and density. We begin with the simplest case -- methods for multiple-energy CT using isotopic sources -- and proceed to multiple-energy work with x-ray machine sources. The methods discussed here are illustrated on CT scans of PBX-9502 high explosives, a lexan-aluminum phantom, and a cylinder of glass beads used in a preliminary study to determine if CT can resolve three phases: air, water, and a high-Z oil. In the CT project at LLNL, we have constructed several CT scanners of varying scanning geometries using {gamma}- and x-ray sources. In our research, we employed two of these scanners: pencil-beam CAT for CT data using isotopic sources and video-CAT equipped with an IRT micro-focal x-ray machine source.

Analysis of Relationships among Organizational Barriers to Energy Efficiency Improvement: A Case Study in Indonesia’s Steel Industry

Directory of Open Access Journals (Sweden)

Apriani Soepardi

2018-01-01

Full Text Available The aim of this paper is to analyze and rank the managerial-organizational barriers to energy efficiency improvement from an industry perspective. To that end, this study utilizes the Interpretive Structural Modeling (ISM methodology to identify the contextual relationships among the barriers. In a focus group discussion forum, five practitioners from the steel industry were consulted to identify these mutual linkages. The results indicated that five of the eight barriers proposed are in the linkage category. These barriers include that the energy manager or people in charge of energy management lack influence, there are higher priorities to production activity, there is management resistance to change, there is inadequate management capacity, and there are conflicts of interest within the organization. The management should focus more attention on these barriers, because they have both high driving power and dependency. The findings are intended to help managers from manufacturing sectors identify key barriers and thus develop strategic plans to address these issues.

Renewable energy market conditions and barriers in Turkey

International Nuclear Information System (INIS)

Nalan, Cicek Bezir; Murat, Oeztuerk; Nuri, Oezek

2009-01-01

Decentralized wind, hydropower, biogas and biomass, geothermal, solar thermal and solar electricity energy systems are the most commonly found renewable energy technologies promoted for rural energy supply within sustainable developments programs. They are, therefore, seen to have a central place in the practice of sustainable development and in allowing less development countries to bypass the environmentally damaging fossil fuel intensive paths made by industrialized countries. On the political front, many less development countries are critical of pressure on them to adopt environmental energy technologies. Turkey is situated the meeting point of three continents (Asia, Europe and Africa) and stands as a bridge between Asia and Europe. The country is located in southeastern Europe and southwestern Asia. As Turkey's economy has expanded in recent years, the consumption of primary energy has increased. Presently in order to increase the energy production from domestic energy resources, decrease the use of fossil fuels as well as reduce of green house gas emissions different renewable energy sources are used for energy production in Turkey. The share of energy production from renewable energy sources has increased during the last 10 years. Turkey must import most of the energy to meet her needs. Turkey also has a large potential for renewable energies. The lack of knowledge about renewable energy technologies by most policy-makers, potential consumers, and energy firm managers has played against renewable energy developments. The paper presents renewable energy used in Turkey and Europe Union and evaluation of the market conditions and barriers of renewable energy use in Turkey. (author)

Reactions with weakly bound nuclei at near barrier energies

International Nuclear Information System (INIS)

Nanal, Vandana

2014-01-01

In reactions with weakly bound nuclei, the effect of breakup on fusion process has attracted much attention in recent years. The experimental study shows that breakup channel leads to suppression of complete fusion at above barrier energies due to loss of flux. The fusion barrier distribution can provide a further insight into understanding the influence of coupling to the breakup channels. Similar information could be obtained from the elastic and quasielastic (QEL) scattering because of the conservation of the reaction flux (i.e. R+T= 1), where R is the reflection probability and T is the transmission probability. Thus, quasi-elastic scattering at backward angles is the counterpart of the fusion process and it is expected that the barrier distributions extracted from two processes, namely, QEL and fusion should be similar. While this is true for tightly bound reaction systems, in reactions involving weakly bound projectiles significant differences have been observed for QEL barrier distributions with and without inclusion of breakup processes. This talk will present the recent results for fusion and quasi-elastic scattering in "6","7Li + "1"9"7Au system. Developmental efforts towards a momentum achromatic separator, MARIE, to extract projectile-like secondary ion beams following the reactions of heavy-ion beams from superconducting LINAC booster at Mumbai will also be presented. (author)

Multiplicity distribution and multiplicity moment of black and grey particles in high energy nucleus–nucleus interactions

International Nuclear Information System (INIS)

Ghosh, Dipak; Deb, Argha; Datta, Utpal; Bhattacharyya, S.

2011-01-01

In this paper we have studied the multiplicity distribution of black and grey particles emitted from 16 O–AgBr interactions at 2.1 AGeV and 60 AGeV. We have also calculated the multiplicity moment up to the fifth order for both the interactions and for both kinds of emitted particles. The variation of multiplicity moment with the order number has been investigated. It is seen that in the case of black particles multiplicity moment up to fourth order remains almost constant as energy increases from 2.1 AGeV to 60 AGeV. Fifth order multiplicity moment increases insignificantly with energy. However in the case of grey particles no such constancy of multiplicity moment with energy of the projectile beam is obtained. Later we have extended our study on the basis of Regge–Mueller approach to find the existence of second order correlation during the emission of black as well as the grey particles. The second Mueller moment is found to be positive and it increases as energy increases in the case of black particles. On the contrary in the case of grey particles the second Mueller moment decreases with energy. It can be concluded that as energy increases correlation among the black particles increases. On the other hand with the increase of energy correlation among the grey particles is found to diminish. (author)

Barriers and Potential Solutions for Energy Renovation of Buildings in Denmark

Directory of Open Access Journals (Sweden)

Niels I. Meyer

2014-02-01

Full Text Available Buildings account for a substantial part of the total energy consumption. In Denmark this number is about 40 % and this is approximately the same in most industrial countries. On this background there is an urgent need to develop strategies for reducing the energy demand in the building sector. Renovation of existing buildings must have high priority as houses often last for 50 to 100 years, while the time perspective for the desired transformation to low-energy houses is less than 30 years in order to mitigate global warming and avoid irreversible tipping-points. The only sustainable energy supply in the perspective of centuries is renewable energy provided by the sun and exploited in the form of solar heat, solar electricity (PVs, wind power, hydropower, wave power, and some types of biomass etc. A future dominating role of intermittent renewable sources requires new integrated systems thinking on both the supply and demand side for heat, electricity and transport. Implementing such Smart Energy Systems requires integrated strategic energy planning on the national and local level. With the fundamental changes in the energy supply technologies expected during the coming years, it is important to synchronize investments in energy conservation measures with investments in the supply side, in order to avoid overinvestment in supply systems and thus to minimize the total costs of the transformation to Smart Energy Systems. This paper highlights some of the most important barriers for renovation of existing buildings in Denmark and points to policies for overcoming these barriers. Some of the policies have been presented in the reports of a recent Danish research project (CEESA

Barriers to the adoption of energy-saving technologies in the building sector: A survey study of Jing-jin-tang, China

International Nuclear Information System (INIS)

Du, Ping; Zheng, Li-Qun; Xie, Bai-Chen; Mahalingam, Arjun

2014-01-01

The building sector of China currently consumes 20% of the total energy consumption. Studies on barriers to the adoption of building energy-saving technologies are of great significance on implementing policies related to achieving energy-saving goals. This paper studied 15 barriers with the aid of information collected through questionnaires and semi-structured interviews. The respondents were 135 employees working in the Jing-jin-tang area. Based on the results of the factor analysis, the barriers were categorized into five groups: attitudes of stakeholders, policies and regulations, auxiliary resources, profitability, and adaptability of the technologies. Analysis of the entire sample showed that the stakeholders’ reluctance to use was the largest barrier, followed by high initial investment and low profitability. Further analysis showed that the occupation and designation of the respondents and the size of the enterprises that they served influenced their perspectives on the barriers. It was found that architects attributed more importance to the adoption of energy-saving technologies than contractors; barriers confronted by employees of large enterprises and small enterprises were different; managers perceived weaker barriers than frontline employees and were more optimistic about the prospect of building energy-saving technologies. Finally, policy recommendations were proposed based on these in-depth and targeted analyses. - Highlights: • Fifteen barriers to the adoption of energy-saving technologies are discussed. • Surveys are conducted in one of China's most technologically developed area. • The barriers are divided into 5 groups according to the results of factor analysis. • Barriers related to profitability greatly hamper the adoption of the technologies. • Comparative analyses show the background of respondents influence their viewpoints

Assessment of non-cost barriers to renewable energy growth in EU Member States - AEON

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-05-15

The accelerated deployment of renewable energy technologies has become a major priority for public policy makers across the globe. In the last two decades, most of the debate concerning the promotion of renewables was focused on the financial support schemes and on improving grid access conditions for renewable electricity. Of course, these are crucial issues which will continue to deserve serious attention in the future. However, during the last few years, the importance of tackling non-financial and non-technical barriers to renewable electricity, heat and transport has gained the attention of many policy analysts. In June 2009, Directive 2009/28/EC on the promotion of the use of energy from renewable sources, entered into force. The articles 13, 14 and 16 of the Directive contain a number of requirements for Member States to address or remove non-cost barriers to the increased deployment of renewable energy sources. This study presents among others an overview of these barriers in all EU Member States; their history, their impact on renewable energy deployment and suggestions for policy solutions, where feasible. Separate studies were carried out for 27 EU-countries and made available in a zip-file.

Free-Energy Barrier of Filling a Spherical Cavity in the Presence of Line Tension: Implication to the Energy Barrier between the Cassie and Wenzel States on a Superhydrophobic Surface with Spherical Cavities.

Science.gov (United States)

Iwamatsu, Masao

2016-09-20

The free-energy barrier of filling a spherical cavity having an inner wall of various wettabilities is studied. The morphology and free energy of a lens-shaped droplet are determined from the minimum of the free energy. The effect of line tension on the free energy is also studied. Then, the equilibrium contact angle of the droplet is determined from the generalized Young's equation. By increasing the droplet volume within the spherical cavity, the droplet morphology changes from spherical with an equilibrium contact angle of 180° to a lens with a convex meniscus, where the morphological complete drying transition occurs. By further increasing the droplet volume, the meniscus changes from convex to concave. Then, the lens-shaped droplet with concave meniscus spreads over the whole inner wall, resulting in an equilibrium contact angle of 0° to leave a spherical bubble, where the morphological complete wetting transition occurs. Finally, the whole cavity is filled with liquid. The free energy shows a barrier from complete drying to complete wetting as a function of droplet volume, which corresponds to the energy barrier between the Cassie and Wenzel states of the superhydrophobic surface with spherical cavities. The free-energy maximum occurs when the meniscus of the droplet becomes flat, and it is given by an analytic formula. The effect of line tension is expressed by the scaled line tension, and this effect is largest at the free-energy maximum. The positive line tension increases the free-energy maximum, which thus increases the stability of the Cassie superhydrophobic state, whereas the negative line tension destabilizes the superhydrophobic state.

A study of the deep structure of the energy landscape of glassy polystyrene: the exponential distribution of the energy barriers revealed by high-field electron spin resonance spectroscopy

International Nuclear Information System (INIS)

Bercu, V; Martinelli, M; Massa, C A; Pardi, L A; Leporini, D

2004-01-01

The reorientation of one small paramagnetic molecule (spin probe) in glassy polystyrene (PS) is studied by high-field electron spin resonance spectroscopy at two different Larmor frequencies (190 and 285 GHz). The exponential distribution of the energy barriers for the rotational motion of the spin probe is unambiguously evidenced at both 240 and 270 K. The same shape for the distribution of the energy barriers of PS was evidenced by the master curves provided by previous mechanical and light scattering studies. The breadth of the energy barrier distribution of the spin probe is in the range of the estimates of the breadth of the PS energy barrier distribution. The evidence that the deep structure of the energy landscape of PS exhibits the exponential shape of the energy barrier distribution agrees with the results from extreme-value statistics (Bouchaud and Mezard 1997 J. Phys. A: Math. Gen. 30 7997) and the trap model by Bouchaud and co-workers (1996 J. Phys. A: Math. Gen. 29 3847, 2001 Phys. Rev. B 64 104417). (letter to the editor)

Nucleus-size pinning for determination of nucleation free-energy barriers and nucleus geometry

Science.gov (United States)

Sharma, Abhishek K.; Escobedo, Fernando A.

2018-05-01

Classical Nucleation Theory (CNT) has recently been used in conjunction with a seeding approach to simulate nucleation phenomena at small-to-moderate supersaturation conditions when large free-energy barriers ensue. In this study, the conventional seeding approach [J. R. Espinosa et al., J. Chem. Phys. 144, 034501 (2016)] is improved by a novel, more robust method to estimate nucleation barriers. Inspired by the interfacial pinning approach [U. R. Pedersen, J. Chem. Phys. 139, 104102 (2013)] used before to determine conditions where two phases coexist, the seed of the incipient phase is pinned to a preselected size to iteratively drive the system toward the conditions where the seed becomes a critical nucleus. The proposed technique is first validated by estimating the critical nucleation conditions for the disorder-to-order transition in hard spheres and then applied to simulate and characterize the highly non-trivial (prolate) morphology of the critical crystal nucleus in hard gyrobifastigia. A generalization of CNT is used to account for nucleus asphericity and predict nucleation free-energy barriers for gyrobifastigia. These predictions of nuclei shape and barriers are validated by independent umbrella sampling calculations.

Breakup mechanisms for 7Li + 197Au, 204Pb systems at sub-barrier energies

Directory of Open Access Journals (Sweden)

Luong D.H.

2013-12-01

Full Text Available Coincidence measurements of breakup fragments were carried out for the 7Li + 197Au and 204Pb systems at sub-barrier energies. The mechanisms triggering breakup, and time-scales of each process, were identified through the reaction Q-values and the relative energy of the breakup fragments. Binary breakup of 7Li were found to be predominantly triggered by nucleon transfer, with p-pickup leading to 8Be → α + α decay being the preferred breakup mode. From the time-scales of each process, the coincidence yields were separated into prompt and delayed components, allowing the identification of breakup process important in the suppression of complete fusion of 7Li at above-barrier energies.

Energy barriers for diffusion on heterogeneous stepped metal surfaces: Ag/Cu(110)

International Nuclear Information System (INIS)

Sbiaai, K.; Boughaleb, Y.; Mazroui, M.; Hajjaji, A.; Kara, A.

2013-01-01

In this paper we investigated the diffusion of Ag adatom by computing the energy barriers for many elementary diffusive processes which are likely to happen near to the step edge on Cu (110). The barriers are calculated by means of molecular dynamics simulation by using embedded atom potentials. The proximity to steps alters these barriers considerably, and very different results may be expected. In fact, our numerical calculations show that the diffusion via jump process along step edge is predominant for Ag/Cu(110) and the diffusion over the step occurs sometimes, but only via exchange mechanisms. The adatom diffusion across channels is difficult due to the high value of activation energy required (around 1 eV). Furthermore, we found the Ehrlich–Schwoebel barrier for diffusion around 120 meV in order to descend via exchange process and of the order of 170 meV via hopping mode. This aspect may have a strong influence on the growth character. In general our results suggest that, for our metal system, diffusion mechanism may be important for mass transport across the steps. Implications of these findings are discussed. - Highlights: • Study of adatom diffusion near the step edge • The diffusion along channel is enhanced through jump process. • Arrhenius law is satisfied for a wide range of temperature (310–600 K)

Socio-cultural barriers to the development of a sustainable energy system - the case of hydrogen

Energy Technology Data Exchange (ETDEWEB)

Kjerulf Petersen, L.; Holst Andersen, A.

2009-02-15

Any transition to a more sustainable energy system, radically reducing greenhouse gas emissions, is bound to run in to a host of different barriers - technological and economic, but also socio-cultural. This will also be the case for any large-scale application of hydrogen as energy carrier, especially if the system is going to be based on renewable energy sources. The aim of these research notes is to review and discuss major socio-cultural barriers to new forms of energy supply in general and to hydrogen specifically. Reaching sufficient reductions in greenhouse gas emissions may require more than large-scale dissemination of renewable energy sources. Also reductions or moderations in energy demand may be necessary. Hence, a central point in the research note is to consider not only socio-cultural obstacles for changing technologies in energy production, distribution and consumption but also obstacles for changing the scale of energy consumption, i.e. moderating the growth in how much energy is consumed or even reducing consumption volumes. (au)

Governance and communication for energy efficiency

International Nuclear Information System (INIS)

Thomas, Stefan

2015-01-01

Energy efficiency has multiple benefits. It usually is a win-win option for all aspects of sustainability – environment, social objectives, and economy. We need to evaluate and communicate these multiple benefits – to citizens, companies, and policy-makers. Due to strong market barriers, effective governance and policy packages for energy efficiency are needed. Evaluation shows effective policy can achieve around 2% per year of additional energy savings.

Injection current dependences of electroluminescence transition energy in InGaN/GaN multiple quantum wells light emitting diodes under pulsed current conditions

Energy Technology Data Exchange (ETDEWEB)

Zhang, Feng; Ikeda, Masao, E-mail: mikeda2013@sinano.ac.cn; Liu, Jianping; Zhang, Shuming [Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences (CAS), Suzhou 215123 (China); Key Lab of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences (CAS), Suzhou 215123 (China); Zhou, Kun; Yang, Hui [Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences (CAS), Suzhou 215123 (China); Key Lab of Nanodevices and Applications, Suzhou Institute of Nano-Tech and Nano-Bionics, Chinese Academy of Sciences (CAS), Suzhou 215123 (China); Institute of Semiconductors (CAS), Beijing 100083 (China); Liu, Zongshun [Institute of Semiconductors (CAS), Beijing 100083 (China)

2015-07-21

Injection current dependences of electroluminescence transition energy in blue InGaN/GaN multiple quantum wells light emitting diodes (LEDs) with different quantum barrier thicknesses under pulsed current conditions have been analyzed taking into account the related effects including deformation caused by lattice strain, quantum confined Stark effects due to polarization field partly screened by carriers, band gap renormalization, Stokes-like shift due to compositional fluctuations which are supposed to be random alloy fluctuations in the sub-nanometer scale, band filling effect (Burstein-Moss shift), and quantum levels in finite triangular wells. The bandgap renormalization and band filling effect occurring at high concentrations oppose one another, however, the renormalization effect dominates in the concentration range studied, since the band filling effect arising from the filling in the tail states in the valence band of quantum wells is much smaller than the case in the bulk materials. In order to correlate the carrier densities with current densities, the nonradiative recombination rates were deduced experimentally by curve-fitting to the external quantum efficiencies. The transition energies in LEDs both with 15 nm quantum barriers and 5 nm quantum barriers, calculated using full strengths of theoretical macroscopic polarization given by Barnardini and Fiorentini [Phys. Status Solidi B 216, 391 (1999)] are in excellent accordance with experimental results. The LED with 5 nm barriers has been shown to exhibit a higher transition energy and a smaller blue shift than those of LED with 15 nm barriers, which is mainly caused by the smaller internal polarization field in the quantum wells.

Barriers to installing innovative energy systems in existing housing stock identified

NARCIS (Netherlands)

Hoppe, Thomas

2013-01-01

Several barriers to upgrading existing social housing with innovative energy systems (IES) have been identified by a study of eight large-scale renovation projects in the Netherlands. These include a lack of trust between stakeholders, opposition from tenants on grounds of increased costs or delays,

Barriers and possibilities for low-carbon-energy consuming technologies

DEFF Research Database (Denmark)

Bjarklev, Araceli

consensus that one of the solutions to the current environmental challenge will be based on low-carbon-technologies, there are many issues that set a barrier for its adequate development and still many actors in these sectors are sceptical about the possibilities. Illumination is a very interesting sector...... to target, since it uses 19% of the total electricity produced in the world. Consequently, this paper takes the Danish office lighting sector as a study object and discusses the question: What are the main barriers and possibilities for the energy saving illumination technologies to efficiently reduce...... their ecological footprint. The discussion is supported by using relevant elements of the cradle-to-grave, eco-design and environmental-innovation theories. It is based on active participation in interdisciplinary projects and face-to-face in-depth interviews with relevant actors along the entire Danish...

Multiple Intimate Partner Violence Experiences: Knowledge, Access, Utilization and Barriers to Utilization of Resources by Women of the African Diaspora.

Science.gov (United States)

Sabri, Bushra; Huerta, Julia; Alexander, Kamila A; St Vil, Noelle M; Campbell, Jacquelyn C; Callwood, Gloria B

2015-11-01

This study examined knowledge, access, utilization, and barriers to use of resources among Black women exposed to multiple types of intimate partner violence in Baltimore, Maryland and the U.S. Virgin Islands (USVI). We analyzed quantitative survey data collected by 163 women recruited from primary care, prenatal or family planning clinics in Baltimore and the USVI. In addition we analyzed qualitative data from in-depth interviews with 11 women. Quantitative data were analyzed using descriptive statistics and qualitative data were analyzed using thematic analysis. A substantial proportion of Black women with multiple types of violence experiences lacked knowledge of, did not have access to, and did not use resources. Barriers to resource use were identified at the individual, relationship, and community levels. There is need for programs to develop awareness, promote access and utilization of resources, and eliminate barriers to resource use among abused Black women.

Analyzing Barriers to Energy Conservation in Residences and Offices: The Rewire Program at the University of Toronto

Science.gov (United States)

Stokes, Leah C.; Mildenberger, Matto; Savan, Beth; Kolenda, Brian

2012-01-01

Conducting a barriers analysis is an important first step when designing proenvironmental behavior change interventions. Yet, detailed information on common barriers to energy conservation campaigns remains unavailable. Using a pair of original surveys, we leverage the theory of planned behavior to report on the most important barriers for…

Multiplicity distributions in high energy collisions

International Nuclear Information System (INIS)

Giovannini, A.; Lupia, S.; Ugoccioni, R.

1992-01-01

We discuss the important phases in the evolution of our understanding of multiplicity distributions in high energy collisions with particular emphasis to intermittent behavior and shoulder structure problem. (orig.)

Multiplicity distributions in high energy collisions

Energy Technology Data Exchange (ETDEWEB)

Giovannini, A.; Lupia, S.; Ugoccioni, R. (Dipt. di Fisica Teorica, Univ. Turin (Italy) INFN, Turin (Italy))

1992-03-01

We discuss the important phases in the evolution of our understanding of multiplicity distributions in high energy collisions with particular emphasis to intermittent behavior and shoulder structure problem. (orig.).

Barriers to the use of renewable energy in Western Australia

International Nuclear Information System (INIS)

Harman, F.; Stocker, L.; Walker, I.; Stirling, M.

1991-08-01

Public attitudes towards renewable energy sources, in particular solar energy is examined through a survey of water heating in the metropolitan area, energy supply and use on pastoral leases in Western Australia. The private costs of water heating systems was assessed in a way which may give guidance to manufacturers on improving the economics of solar water heating systems, and to policy makers for facilitating the use of solar water heating systems. The policies currently in place in Western Australia which act as barriers to the greater use of renewable energy were also outlined. The cost data, together with the attitudes of consumers as revealed in the surveys, indicate that manufacturers and suppliers of renewable energy equipment need to reduce costs and improve the actual and perceived capability, performance and reliability of their equipment. 96 refs., 30 tabs., 38 figs

Current-induced changes of migration energy barriers in graphene and carbon nanotubes.

Science.gov (United States)

Obodo, J T; Rungger, I; Sanvito, S; Schwingenschlögl, U

2016-05-21

An electron current can move atoms in a nanoscale device with important consequences for the device operation and breakdown. We perform first principles calculations aimed at evaluating the possibility of changing the energy barriers for atom migration in carbon-based systems. In particular, we consider the migration of adatoms and defects in graphene and carbon nanotubes. Although the current-induced forces are large for both the systems, in graphene the force component along the migration path is small and therefore the barrier height is little affected by the current flow. In contrast, the same barrier is significantly reduced in carbon nanotubes as the current increases. Our work also provides a real-system numerical demonstration that current-induced forces within density functional theory are non-conservative.

Barriers to Building Energy Efficiency (BEE) promotion: A transaction costs perspective

Science.gov (United States)

Qian Kun, Queena

Worldwide, buildings account for a surprisingly high 40% of global energy consumption, and the resulting carbon footprint significantly exceeds that of all forms of transportation combined. Large and attractive opportunities exist to reduce buildings' energy use at lower costs and higher returns than in other sectors. This thesis analyzes the concerns of the market stakeholders, mainly real estate developers and end-users, in terms of transaction costs as they make decisions about investing in Building Energy Efficiency (BEE). It provides a detailed analysis of the current situation and future prospects for BEE adoption by the market's stakeholders. It delineates the market and lays out the economic and institutional barriers to the large-scale deployment of energy-efficient building techniques. The aim of this research is to investigate the barriers raised by transaction costs that hinder market stakeholders from investing in BEES. It explains interactions among stakeholders in general and in the specific case of Hong Kong as they consider transaction costs. It focuses on the influence of transaction costs on the decision-making of the stakeholders during the entire process of real estate development. The objectives are: 1) To establish an analytical framework for understanding the barriers to BEE investment with consideration of transaction costs; 2) To build a theoretical game model of decision making among the BEE market stakeholders; 3) To study the empirical data from questionnaire surveys of building designers and from focused interviews with real estate developers in Hong Kong; 4) To triangulate the study's empirical findings with those of the theoretical model and analytical framework. The study shows that a coherent institutional framework needs to be established to ensure that the design and implementation of BEE policies acknowledge the concerns of market stakeholders by taking transaction costs into consideration. Regulatory and incentive options

Low energy pion detection by a silicon surface barrier telescope

International Nuclear Information System (INIS)

Sealock, R.M.; Caplan, H.S.; Leung, M.K.

1978-01-01

Four telescopes of three (2-ΔE, 1-E) silicon surface barrier detectors each, mounted in the focal plane of a magnetic spectrometer, have been used to detect positive pions in the energy range from 4.7-17.9 MeV and negative pions from 14.1-17.9 MeV. Positive pions from 4.7-12.7 MeV were stopped in the third detector while positive and negative pions from 14.1-17.9 MeV were detected in transmission. For energies greater than 7.4 MeV aluminum moderators were placed in front of the first detector to degrade the pion energy. Energy spectra show well resolved pion peaks with extremely low background. Double differential cross sections for the 12 C(e,π + ) 12 B,e' reaction have been measured. (Auth.)

Financing renewable energy in developing countries. Drivers and barriers for private finance in sub-Saharan Africa

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-02-15

The focus of this report is to identify and portray current barriers to the scaling up of private investment and finance for electricity generation from renewable energy sources in the sub-Saharan region. Best practice in tackling these barriers is identified, partly from a literature review but especially from the results of a survey conducted among 36 financial institutions that are UNEP Finance Initiative members and two non-member banks (all survey respondents have experience in the field of energy infrastructure finance). Promising avenues in the areas of local policy reform, incentive mechanisms and international de-risking instruments are highlighted. In particular, this report addresses the following questions: (a) Why are sub-Saharan Africa and developing countries elsewhere failing to expand electricity generation from renewable sources? What are the barriers to such expansion? What is keeping the risk-return profile of renewable energy investments in sub-Saharan Africa unattractive and projects commercially unviable?; (b) What have been the experiences of private sector lenders and investors in the area of renewable energy projects in developing countries? What barriers and drivers have they encountered, and how can these experiences be of use in sub-Saharan Africa?; (c) What can be learned from the modest but encouraging successes of a few sub-Saharan African countries? Can these results be replicated? What was done in these countries to improve the risk-return profile of renewable energy and unlock private finance?.

BARRIERS TO ENERGY ACCESS IN THE URBAN POOR AREAS OF DHAKA, BANGLADESH: ANALYSIS OF PRESENT SITUATION AND RECOMMENDATIONS

Directory of Open Access Journals (Sweden)

Molla Shahadat Hossain Lipu

2013-10-01

Full Text Available Energy is a crucial input to promote socioeconomic development. In Bangladesh, about 96 million people (59% do not have access to electricity and 143 million people (88% still depend on biomass for cooking. The urban poor living in slum areas with lack of access to clean and modern sources of energy have not been addressed comprehensively. The main objective of this study is to identify the barriers faced by the urban poor in the slum areas of Dhaka in accessing different fuels and provide specific recommendations to overcome the barriers to enable energy access. The study is mainly based on field survey covering 185 households of the four major slum areas of Dhaka, literature review, and stakeholder interviews. Many barriers have been identified through this research where urban poor face problems in accessing legal energy services due to illegal settlement, lack of explicit policy on energy and housing, lack of dedicated institution, the pervasive role of Mastaans, poor infrastructure and lack of monitoring and evaluating system. Barriers specific recommendations are also suggested based on the experiences from the field visit and the best practices outside Bangladesh are also identified.

Barriers and opportunities for improving energy efficiency in the social housing sector: Case study of E4C's Division of Housing and Mental Health

Science.gov (United States)

Marchand-Smith, Patrick

Energy efficiency improvements in the social housing sector have the potential to produce a range of environmental and social benefits. These improvements can be produced through retrofits that deliver energy savings or new construction built to a high standard of energetic efficiency. However, implementation of these approaches is hindered by economic and organizational constraints affecting the agencies that provide society with social housing and the governments that support the provision of these services. This thesis builds on the work of other researchers studying these constraints by supplying an in-depth case study from Alberta and a discussion based on its findings. The case study focuses on E4C, a social service agency with several housing projects. Overall, findings matched important themes identified in the academic literature. The in-depth nature of the case study added additional insight to many of these themes. Most barriers are economic in nature and related to a lack of sufficient funding or the up-front costs of energy-saving retrofits. The recommendations presented are based on consideration of the multiple barriers and opportunities faced. Most of these require a considerable investment of time on the part of agencies and would be followed up by capital investments to implement energy-saving changes. Therefore it is important to note that the most significant barrier is commitment, which is one of E4C's central values. This thesis showed that commitment cannot exceed capacity to act. Greater commitment on the part of governments, agencies or society at large could have significant impacts in improving the energy efficiency of buildings in the Albertan, and Canadian, social housing sector.

Socio-technical barriers to the use of energy-efficient timber drying technology in New Zealand

International Nuclear Information System (INIS)

Bell, Martha; Carrington, Gerry; Lawson, Rob; Stephenson, Janet

2014-01-01

This study of industrial energy behaviours identifies barriers to the use of energy-efficient drying technology in the New Zealand timber industry, and explores these barriers through the “energy cultures” lens. Vented kiln dryers were preferred by larger firms and heat pump kiln dryers were used by smaller firms. Although few firms could specify all their costs, we found no significant differences in the average operating costs, drying costs or commercial success of the larger and smaller firms. We found that socio-technical barriers create “energy cultures” at the level of both the firm and the sector, supporting the dominance of vented kiln dryers. The prevailing technologies, practices and norms at the sector level strongly support vented kilns, the status quo being embedded in the socio-technical context, hindering technological learning, improved energy efficiency and innovation. Influential stakeholders in the industry were thus part of, and locked into, the industry-wide energy culture, and were not in a position to effect change. We conclude that actors external to the prevailing industry energy culture need to leverage change in the industry norms, practices and/or technologies in order to reap the advantages of energy-efficient drying technology, assist its continued evolution and avoid the risks of path-dependency. - Highlights: • Firms processing timber in New Zealand use two main drying technologies. • Relatively inefficient vented dryers dominate over energy-efficient heat pumps. • Operating costs are similar but the socio-technical regime supports vented dryers. • Stasis is created by fixed energy cultures both within firms and across the sector. • Stasis hampers technical development in heat pump drying and business innovation

Observation of the one- to six-neutron transfer reactions at sub-barrier energies

Energy Technology Data Exchange (ETDEWEB)

Jiang, C.L.; Rehm, K.E.; Gehring, J. [and others

1995-08-01

It was suggested many years ago that when two heavy nuclei are in contact during a grazing collision, the transfer of several correlated neutron-pairs could occur. Despite considerable experimental effort, however, so far only cross sections for up to four-neutron transfers have been uniquely identified. The main difficulties in the study of multi-neutron transfer reactions are the small cross sections encountered at incident energies close to the barrier, and various experimental uncertainties which can complicate the analysis of these reactions. We have for the first time found evidence for multi-neutron transfer reactions covering the full sequence from one- to six-neutron transfer reactions at sub-barrier energies in the system {sup 58}Ni + {sup 100}Mo.

Current-induced changes of migration energy barriers in graphene and carbon nanotubes

KAUST Repository

Obodo, Tobechukwu Joshua

2016-04-29

An electron current can move atoms in a nanoscale device with important consequences for the device operation and breakdown. We perform first principles calculations aimed at evaluating the possibility of changing the energy barriers for atom migration in carbon-based systems. In particular, we consider the migration of adatoms and defects in graphene and carbon nanotubes. Although the current-induced forces are large for both the systems, in graphene the force component along the migration path is small and therefore the barrier height is little affected by the current flow. In contrast, the same barrier is significantly reduced in carbon nanotubes as the current increases. Our work also provides a real-system numerical demonstration that current-induced forces within density functional theory are non-conservative. © 2016 The Royal Society of Chemistry.

THERMAL PROPERTIES OF TRANSPARENT BARRIER MODIFIED WITH ORGANIC PCMS

Directory of Open Access Journals (Sweden)

Michał MUSIAŁ

2016-03-01

Full Text Available Renewable energy sources are increasingly often applied in civil engineering as a mean to reduce buildings energy demand for heating. One of the ways to reduce HVAC energy demand is to limit heat transfer and excessive solar gain through building's glazed barriers. Preliminary results of the research conducted on organic PCM-modified transparent barrier are presented in this paper. Multiple publications concerning PCMs application in structural materials have recently appeared. Most of them are focused on modification of structure of non-transparent sections of buildings' envelope. Augmenting a glazed barrier with PCMs increases its heat capacity and thermal resistance. The most important feature of the assembly is the thermal buffer, a product of PCM's considerable value of specific latent heat. Research were conducted on a triple-pane transparent rectangular barrier, that constituted one of the faces of cubic chamber. Internal volume of the chamber was 1m3. The applied PCM was a mixture of saturated and non-saturated hydrocarbons. The described assembly was subjected to temperature and radiation that occur in Poland during winter. Glazing temperature, melted/total PCM ratio were measured, as well as energy demand for keeping internal temperature at constant level. Measurements were made in steady states, for various PCM layer thickness. The influence of the modification on energy demand was determined, along with the most effective and rational thickness of PCM layer to be applied. Conducted research enabled to develop a basis for further investigation of PCMs application in civil engineering.

Disentangling complete and incomplete fusion for 9Be+187Re system at near barrier energies

International Nuclear Information System (INIS)

Kharab, Rajesh; Chahal, Rajiv; Rajiv Kumar

2015-01-01

The breakup of projectile before fusion leads to some unusual fusion mechanisms like incomplete fusion (ICF) and sequential complete fusion (SCF). Experimentally, it is not possible to separate SCF events from direct complete fusion (DCF). However, the complete fusion and incomplete fusion can be measured separately. Theoretically it is very difficult to calculate the complete and incomplete fusion cross section separately using different models. Very recently A. Diaz-Torres has developed a computer code platypus based on classical dynamical model wherein the complete and incomplete fusion cross sections are calculated separately. But this model is found to work very well at energies above the barrier energy. Here we have attempted to extrapolate the results of the code platypus by using simple Wong's formula in conjunction with the energy dependent Woods-Saxon potential (EDWSP) in the below barrier energy region

Simultaneous energy harvesting and information processing in wireless multiple relays with multiple antennas

Science.gov (United States)

Albaaj, Azhar; Makki, S. Vahab A.; Alabkhat, Qassem; Zahedi, Abdulhamid

2017-07-01

Wireless networks suffer from battery discharging specially in cooperative communications when multiple relays have an important role but they are energy constrained. To overcome this problem, energy harvesting from radio frequency signals is applied to charge the node battery. These intermediate nodes have the ability to harvest energy from the source signal and use the energy harvested to transmit information to the destination. In fact, the node tries to harvest energy and then transmit the data to destination. Division of energy harvesting and data transmission can be done in two algorithms: time-switching-based relaying protocol and power-splitting-based relaying protocol. These two algorithms also can be applied in delay-limited and delay-tolerant transmission systems. The previous works have assumed a single relay for energy harvesting, but in this article, the proposed method is concentrated on improving the outage probability and throughput by using multiple antennas in each relay node instead of using single antenna. According to our simulation results, when using multi-antenna relays, ability of energy harvesting is increased and thus system performance will be improved to great extent. Maximum ratio combining scheme has been used when the destination chooses the best signal of relays and antennas satisfying the required signal-to-noise ratio.

New light on an old problem: Reflections on barriers and enablers of distributed energy

International Nuclear Information System (INIS)

Szatow, Anthony; Quezada, George; Lilley, Bill

2012-01-01

This viewpoint article, New light on an Old Problem, aims to stimulate thought and discussion on pathways to rapid emission reduction trajectories. It considers briefly the history of the Australian energy system and recent attempts to support emerging, distributed energy supply systems, before exploring the importance of new energy supply models and how they may emerge organically, ahead of further policy and regulatory shifts in Australia. The article is shaped by extensive primary research, literature review and engagement with policy makers, industry and community organisations, energy market institutions, colleagues and others over a period of four years. It outlines how new business models may reduce emissions ahead of policy and regulation, and the importance of keeping an open mind when considering ‘barriers’ to distributed energy. We hope this article will spark interest and dialogue with colleagues who may be experiencing and grappling with similar challenges. - Research highlights: ► We discuss documented barriers to distributed energy. ► We draw on socio-technical system literature and our research experience to outline a possible solution to distributed energy barriers. ► We describe a hypothetical energy service business model, led by the property sector, as a catalyst for energy market change. ► We outline reasons for our confidence in this property sector led energy services model.

Potential and barrier study. Passive house and near-zero energy buildings; Potensial- og barrierestudie. Passivhus og naer nullenergibygninger

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

The main conclusion from the analysis is that the barriers to realize both passive and near zero-energy buildings are significant. In addition to being a mere economic assessment indicates that 30-70% of the technical potential is not profitable depending on energy price levels, the barriers is reducing the economic potential with approximately another half as a realistic market potential.(eb)

Deformation energy of a toroidal nucleus and plane fragmentation barriers

International Nuclear Information System (INIS)

Fauchard, C.; Royer, G.

1996-01-01

The path leading to pumpkin-like configurations and toroidal shapes is investigated using a one-parameter shape sequence. The deformation energy is determined within the analytical expressions obtained for the various shape-dependent functions and the generalized rotating liquid drop model taking into account the proximity energy and the temperature. With increasing mass and angular momentum, a potential well appears in the toroidal shape path. For the heaviest systems, the pocket is large and locally favourable with respect to the plane fragmentation barriers which might allow the formation of evanescent toroidal systems which would rapidly decay in several fragments to minimize the surface tension. (orig.)

The impact of farmers’ participation in field trials in creating awareness and stimulating compliance with the World Health Organization’s farm-based multiple-barrier approach

DEFF Research Database (Denmark)

Amponsah, Owusu; Vigre, Håkan; Schou, Torben Wilde

2016-01-01

-barrier approach field trials. The results of the study show that participation in the field trials has statistically significant effects on farmers’ awareness of the farm-based multiple-barrier approach. Compliance has, however, been undermined by the farmers’ perception that the cost of compliance is more......The results of a study aimed as assessing the extent to which urban vegetable farmers’ participation in field trials can impact on their awareness and engender compliance with the World Health Organization’s farm-based multiple-barrier approach are presented in this paper. Both qualitative...... and quantitative approaches have been used in this paper. One hundred vegetable farmers and four vegetable farmers’ associations in the Kumasi Metropolis in Ghana were covered. The individual farmers were grouped into two, namely: (1) participants and (2) non-participants of the farm-based multiple...

Complex energy eigenvalues of a linear potential with a parabolical barrier

International Nuclear Information System (INIS)

Malherbe, J.B.

1978-01-01

The physical meaning and restrictions of complex energy eigenvalues are briefly discussed. It is indicated that a quasi-stationary phase describes an idealised disintegration system. Approximate resonance-eigenvalues of the one dimensional Schrodinger equation with a linear potential and parabolic barrier are calculated by means of Connor's semiclassical method. This method is based on the generalized WKB-method of Miller and Good. The results obtained confirm the correctness of a model representation which explains the unusual distribution of eigenvalues by certain other linear potentials in a complex energy level [af

Assessing District Energy Systems Performance Integrated with Multiple Thermal Energy Storages

Science.gov (United States)

Rezaie, Behnaz

The goal of this study is to examine various energy resources in district energy (DE) systems and then DE system performance development by means of multiple thermal energy storages (TES) application. This study sheds light on areas not yet investigated precisely in detail. Throughout the research, major components of the heat plant, energy suppliers of the DE systems, and TES characteristics are separately examined; integration of various configurations of the multiple TESs in the DE system is then analysed. In the first part of the study, various sources of energy are compared, in a consistent manner, financially and environmentally. The TES performance is then assessed from various aspects. Then, TES(s) and DE systems with several sources of energy are integrated, and are investigated as a heat process centre. The most efficient configurations of the multiple TESs integrated with the DE system are investigated. Some of the findings of this study are applied on an actual DE system. The outcomes of this study provide insight for researchers and engineers who work in this field, as well as policy makers and project managers who are decision-makers. The accomplishments of the study are original developments TESs and DE systems. As an original development the Enviro-Economic Function, to balance the economic and environmental aspects of energy resources technologies in DE systems, is developed; various configurations of multiple TESs, including series, parallel, and general grid, are developed. The developed related functions are discharge temperature and energy of the TES, and energy and exergy efficiencies of the TES. The TES charging and discharging behavior of TES instantaneously is also investigated to obtain the charging temperature, the maximum charging temperature, the charging energy flow, maximum heat flow capacity, the discharging temperature, the minimum charging temperature, the discharging energy flow, the maximum heat flow capacity, and performance

The Schottky energy barrier dependence of charge injection in organic light-emitting diodes

Science.gov (United States)

Campbell, I. H.; Davids, P. S.; Smith, D. L.; Barashkov, N. N.; Ferraris, J. P.

1998-04-01

We present device model calculations of the current-voltage (I-V) characteristics of organic diodes and compare them with measurements of structures fabricated using MEH-PPV. The structures are designed so that all of the current is injected from one contact. The I-V characteristics are considered as a function of the Schottky energy barrier to charge injection from the contact. Experimentally, the Schottky barrier is varied from essentially zero to more than 1 eV by using different metal contacts. A consistent description of the device I-V characteristics is obtained as the Schottky barrier is varied from small values, less than about 0.4 eV, where the current flow is space-charge limited to larger values where it is contact limited.

Barriers and opportunities for labels for highly energy-efficient houses

International Nuclear Information System (INIS)

Mlecnik, Erwin; Visscher, Henk; Van Hal, Anke

2010-01-01

Promoting energy efficiency in the building sector is essential if the agreements of the Kyoto Protocol are to be honoured. Different initiatives for energy labelling of highly energy-efficient residential buildings have emerged throughout Europe as an essential method to stimulate market demand, to control grants or to ensure the quality of demonstration projects with excellent energy performance. The paper identifies the barriers and opportunities for the further diffusion of labels for highly energy-efficient houses. A model based on the theory of the diffusion of innovation is developed to analyse perceived attributes of existing European labels. The paper investigates the innovation characteristics of existing labels in Europe, with a focus on advanced countries. The question of compatibility with the development of the European Energy Performance of Buildings Directive (EPBD) is examined in detail. We found that the diffusion of emerging and already existing voluntary European labels for highly energy-efficient houses is needed. Their complexity can be lowered and relative advantage, trialability, observability, and compatibility can be increased. EPBD calculation procedures should be able to receive highly energy-efficient houses. In the framework of the recast of the EPBD, official recognition of existing voluntary labels is recommended. (author)

Energy SMEs in sub-Saharan Africa: Outcomes, barriers and prospects in Ghana, Senegal, Tanzania and Zambia

DEFF Research Database (Denmark)

Haselip, James Arthur; Desgain, Denis DR; Mackenzie, Gordon A.

a commercially viable energy SME sector, emphasising the lack of strong policy support from governments, poor business skills capacity and the high cost of many RETs as related cause-and-effect barriers. While these issues continue to characterise, to a greater or lesser extent, the energy SMEs sectors......; lack of clearly defined markets; demand-side barriers to purchase relatively high capital-intense energy products. Where numerous energy SMEs are in operation and thus where a valid demonstration effect can be identified, there is a perceived paradox that serves to undermine commercial interest...... in investing in energy SMEs. The paradox is that the donor-supported businesses that were issued with concessional and/or flexible loans serve to demonstrate that these businesses depend upon such concessional terms, i.e., that they could not survive in ‘the real world’. While this assumption is widely...

Implementation of renewable energy technology - Opportunities and barriers. Summary of country studies

Energy Technology Data Exchange (ETDEWEB)

Painuly, J.P.; Fenhann, J.V.

2002-07-01

The project was launched to identify barriers to the implementation of renewable energy technologies (RETs) and explore measures to overcome the identified barriers. National institutions in Egypt, Ghana and Zimbabwe carried out the country studies based on the basic methodological framework provided by the UNEP Centre. The objectives of the project included strengthening institutional capacity for analysis and implementation of RET projects in the participating countries and bring out experiences on RETs barriers and removal measures for dissemination so that others can benefit from the knowledge so gained. An important highlight of the studies was involvement of stake holders in the process of identification of barriers and measures to remove them. A preliminary identification of relevant RETs for their countries was done by the country teams in the initial stage of the project. After that, national workshops involving various stake holders were held between July and September 1999 to discuss the RETs and barriers to their implementation. Based on the discussions, a few important RETs were identified for more detailed study. PV systems for rural electrification, solar water heating systems and large-scale biogas system were identified and analysed for barriers in the Egypt country study. Economic, information and policy barriers were identified as major barriers for these technologies. Solar water pumps, biogas and small hydro were the focus of study in Ghana. In this case also, economic, information and policy barriers were found to be the important barriers for the selected technologies. In the case of Zimbabwe, focus was on identification of primary and secondary barriers to RETs dissemination. The primary barriers included lack of capacity to develop proposals, lack of information for policy making and framework for information dissemination. The study concluded that the secondary barriers as seen and experienced by the stake holders are due to primary

Transportation Energy Futures Series. Non-Cost Barriers to Consumer Adoption of New Light-Duty Vehicle Technologies

Energy Technology Data Exchange (ETDEWEB)

Stephens, Thomas [Argonne National Lab. (ANL), Argonne, IL (United States)

2013-03-01

Consumer preferences are key to the adoption of new vehicle technologies. Barriers to consumer adoption include price and other obstacles, such as limited driving range and charging infrastructure; unfamiliarity with the technology and uncertainty about direct benefits; limited makes and models with the technology; reputation or perception of the technology; standardization issues; and regulations. For each of these non-cost barriers, this report estimates an effective cost and summarizes underlying influences on consumer preferences, approximate magnitude and relative severity, and assesses potential actions, based on a comprehensive literature review. While the report concludes that non-cost barriers are significant, effective cost and potential market share are very uncertain. Policies and programs including opportunities for drivers to test drive advanced vehicles, general public outreach and information programs, incentives for providing charging and fueling infrastructure, and development of technology standards were examined for their ability to address barriers, but little quantitative data exists on the effectiveness of these measures. This is one in a series of reports produced as a result of the Transportation Energy Futures project, a Department of Energy-sponsored multi-agency effort to pinpoint underexplored strategies for reducing GHGs and petroleum dependence related to transportation. View all reports on the TEF Web page, http://www.eere.energy.gov/analysis/transportationenergyfutures/index.html.

Deuteron interaction with 124Sn nuclei at sub-barrier energies

Directory of Open Access Journals (Sweden)

Yu.N. Pavlenko

2015-04-01

Full Text Available The measurements of cross sections for deuteron elastic scattering and (d,p reaction on 124Sn nuclei have been performed with aim to study the features of sub-barrier deuteron interaction with heavy nuclei. Experimental data were obtained on the electrostatic Tandem accelerator EGP-10K of the Institute for Nuclear Research (Kyiv at the deuteron beam energies Ed = 4.0; 5.0 and 5.5 MeV. Cross sections of deuteron elastic scattering were calculated in approach where the deuteron interaction potential with heavy nuclei at sub-barrier energies has been constructed in the framework of single folding model using the complex dynamic polarization potential. It is shown that the account of finite deuteron size leads to the increasing the nuclear potential in outer region of interaction and significantly improves the description of the experimental data. The calculations of elastic scattering cross sections were performed without any variations of the nuclear potential parameters. The analysis of measured integral cross sections of the 124Sn(d,p reaction and calculated cross sections of deuteron breakup reaction 124Sn(d,pn124Sn shows the dominant contribution of the neutron transfer reaction in the processes of the formation of protons and elastic scattering cross sections.

Energy Transition and Barriers on the Path to its Introduction

Directory of Open Access Journals (Sweden)

Tomislav Tkalec

2015-12-01

Full Text Available Energy transition is a concept originating from the necessity of solving environmental problems and conflicts in the energy sector. It originates from environmental tradition and advocates transition from environmentally and socially controversial sources of energy to renewables. That also means a shift from large centralized production units (mainly based on fossil and nuclear energy to smaller, dispersed ones. This decentralization process inherently leads to a democratization of the electricity sector, as large energy companies are losing their power and position in the energy policy arena, as more and more smaller actors emerge. However, when trying to change the electricity system, many obstacles arise – from the economics, old energy paradigm, path dependence, inertia of electricity system, power relations between actors, institutional lock-in, to perceptions and values of the dominant players. All barriers are reflected in the energy policy arena, dominated mainly by large energy companies, reluctant to accept changes. Demands for a change come from non-dominant actors, mainly from civil society actors and others, who are pushed to the margins of the political arena. Therefore, decision-makers should recognize their role, change institutional structure of the energy policy arena, and open it to various actors that can add new qualities to decision-making processes and outputs.

Optical transitions in Ge/SiGe multiple quantum wells with Ge-rich barriers

Science.gov (United States)

Bonfanti, M.; Grilli, E.; Guzzi, M.; Virgilio, M.; Grosso, G.; Chrastina, D.; Isella, G.; von Känel, H.; Neels, A.

2008-07-01

Direct-gap and indirect-gap transitions in strain-compensated Ge/SiGe multiple quantum wells with Ge-rich SiGe barriers have been studied by optical transmission spectroscopy and photoluminescence experiments. An sp3d5s∗ tight-binding model has been adopted to interpret the experimental results. Photoluminescence spectra and their comparison with theoretical calculations prove the existence of type-I band alignment in compressively strained Ge quantum wells grown on relaxed Ge-rich SiGe buffers. The high quality of the transmission spectra opens up other perspectives for application of these structures in near-infrared optical modulators.

Energy consumption and CO2 emissions of industrial process technologies. Saving potentials, barriers and instruments

International Nuclear Information System (INIS)

Fleiter, Tobias; Schlomann, Barbara; Eichhammer, Wolfgang

2013-01-01

Which contribution can the increase of energy efficiency achieve in the industry energy for the energy transition in Germany? To answer this question a model-based analysis of existing energy efficiency potentials of the energy-intensive industries is performed, which account for about 70% of the total energy demand of the industry. Based on this industry for each sector are instruments proposed for the implementation of the calculated potential and to overcome the existing barriers. [de

Charged-particle multiplicity at LHC energies

CERN Multimedia

CERN. Geneva

2010-01-01

The talk presents the measurement of the pseudorapidity density and the multiplicity distribution with ALICE at the achieved LHC energies of 0.9 and 2.36 TeV.An overview about multiplicity measurements prior to LHC is given and the related theoretical concepts are briefly discussed.The analysis procedure is presented and the systematic uncertainties are detailed. The applied acceptance corrections and the treatment of diffraction are discussed.The results are compared with model predictions. The validity of KNO scaling in restricted phase space regions is revisited. 

Fusion barriers in heavy ion collisions

International Nuclear Information System (INIS)

Zhu Long; Su Jun; Xie Wenjie; Guo Chenchen; Zhang Donghong; Zhang Fengshou

2014-01-01

Study of fusion barrier is very important for people to better understand fusion reactions. In this paper the Improved Isospin-dependent Quantum Molecular Dynamics (ImIQMD) model is introduced firstly. Then the shell correction effects, energy dependence, isospin effects and orientation effects of fusion barrier are studied. The fusion barriers for the fusion reactions "4"0Ca + "4"0Ca, "4"8Ca + "2"0"8Pb, "4"8Ca + "2"0"4Pb and "1"6O + "1"5"4Sm are extracted. The negative shell correction energies lower potential barriers of a certain reaction. A complex phenomenon of energy dependence is observed. It is also found that incident energy dependence of the barrier radius and barrier height shows opposite behaviors. The Coulomb potential shows weak energy dependence when distance of two colliding nuclei is lower than the touching distance. The isospin effects of the potential barrier are investigated. The orientation effects of the potential barrier are also discussed for the system "1"6O + "1"5"4Sm. (authors)

Driven diffusion against electrostatic or effective energy barrier across α-hemolysin

Energy Technology Data Exchange (ETDEWEB)

Ansalone, Patrizio [Istituto Nazionale di Ricerca Metrologica, Strada delle Cacce 91, Torino, IT-10135 (Italy); Chinappi, Mauro [Center for Life Nano Science@Sapienza, Istituto Italiano di Tecnologia, Via Regina Elena 291, 00161 Roma (Italy); Rondoni, Lamberto [Scienze Matematiche, Politecnico di Torino Corso Duca degli Abruzzi 24, Torino, IT-10129, Italy and INFN, Sez. di Torino, Via P. Giuria 1, Torino IT-10125 (Italy); Cecconi, Fabio, E-mail: fabio.cecconi@roma1.infn.it [CNR-Istituto dei Sistemi Complessi UoS “Sapienza,” Via dei Taurini 19, 00185 Roma (Italy)

2015-10-21

We analyze the translocation of a charged particle across an α-Hemolysin (αHL) pore in the framework of a driven diffusion over an extended energy barrier generated by the electrical charges of the αHL. A one-dimensional electrostatic potential is extracted from the full 3D solution of the Poisson’s equation. We characterize the particle transport under the action of a constant forcing by studying the statistics of the translocation time. We derive an analytical expression of translocation time average that compares well with the results from Brownian dynamic simulations of driven particles over the electrostatic potential. Moreover, we show that the translocation time distributions can be perfectly described by a simple theory which replaces the true barrier by an equivalent structureless square barrier. Remarkably, our approach maintains its accuracy also for low-applied voltage regimes where the usual inverse-Gaussian approximation fails. Finally, we discuss how the comparison between the simulated time distributions and their theoretical prediction results to be greatly simplified when using the notion of the empirical Laplace transform technique.

9Be+120Sn scattering at near-barrier energies within a four-body model

Science.gov (United States)

Arazi, A.; Casal, J.; Rodríguez-Gallardo, M.; Arias, J. M.; Lichtenthäler Filho, R.; Abriola, D.; Capurro, O. A.; Cardona, M. A.; Carnelli, P. F. F.; de Barbará, E.; Fernández Niello, J.; Figueira, J. M.; Fimiani, L.; Hojman, D.; Martí, G. V.; Martínez Heimman, D.; Pacheco, A. J.

2018-04-01

Cross sections for elastic and inelastic scattering of the weakly bound 9Be nucleus on a 120Sn target have been measured at seven bombarding energies around and above the Coulomb barrier. The elastic angular distributions are analyzed with a four-body continuum-discretized coupled-channels (CDCC) calculation, which considers 9Be as a three-body projectile (α +α +n ). An optical model analysis using the São Paulo potential is also shown for comparison. The CDCC analysis shows that the coupling to the continuum part of the spectrum is important for the agreement with experimental data even at energies around the Coulomb barrier, suggesting that breakup is an important process at low energies. At the highest incident energies, two inelastic peaks are observed at 1.19(5) and 2.41(5) MeV. Coupled-channels (CC) calculations using a rotational model confirm that the first inelastic peak corresponds to the excitation of the 21+ state in 120Sn, while the second one likely corresponds to the excitation of the 31- state.

Energy barrier of bcc-fcc phase transition via the Bain path in Yukawa system

Science.gov (United States)

Kiyokawa, Shuji

2018-05-01

In the Yukawa system with the dimensionless screening parameter κ>1.5 , when bcc-fcc transition occurs via Bain path, we show that spontaneous transitions do not occur even if the system temperature reaches the transition point of bcc-fcc because it is necessary to increase once the free energy in the process of transition from bcc to fcc through Bain deformation. Here, we refer the temporary increment of the free energy during Bain deformation as Bain barrier. Since there are the Bain barriers at the transitions between bcc and fcc phases, these phases may coexist as metastable state in the wide region (not a coexistence line) of κ and the coupling constant Γ. We study the excess energy of the system and the free energy difference between bcc and fcc phases by the Monte Carlo method, where the simulation box is divided into a large number of elements with small volume and a particle in the box is restricted be placed in one of these elements. By this method, we can tabulate the values of the interparticle potential and can calculate the internal energy fast and precisely.

Reaction channels of 6,7Li+28Si at near-barrier energies

International Nuclear Information System (INIS)

Pakou, A; Rusek, K; Nicolis, N G; Alamanos, N; Doukelis, G; Gillibert, A; Kalyva, G; Kokkoris, M; Lagoyannis, A; Musumarra, A; Papachristodoulou, C; Perdikakis, G; Pierroutsakou, D; Pollacco, E C; Spyrou, A; Zarkadas, Ch

2005-01-01

The production of α-particles in the reactions 6,7 Li+ 28 Si was studied as a means to disentangle the various reaction channels at near-barrier energies. The competition between compound and direct reactions was determined by using the shape of angular distributions and statistical model calculations. DWBA calculations were also performed to probe the various direct channels. It was found that, approaching barrier, transfer channels are the most dominant for both reactions. For 7 Li+ 28 Si d-transfer is one of the contributing channels without excluding t-transfer, while for 6 Li+ 28 Si, n-transfer and p-transfer have substantial contribution but without excluding d-transfer

Energy transfer of excitons between quantum wells separated by a wide barrier

International Nuclear Information System (INIS)

Lyo, S. K.

2000-01-01

We present a microscopic theory of the excitonic Stokes and anti-Stokes energy-transfer mechanisms between two widely separated unequal quantum wells with a large energy mismatch (Δ) at low temperatures (T). Several important intrinsic energy-transfer mechanisms have been examined, including dipolar coupling, real and virtual photon-exchange coupling, and over-barrier ionization of the excitons via exciton-exciton Auger processes. The transfer rate is calculated as a function of T and the center-to-center distance d between the wells. The rates depend sensitively on T for plane-wave excitons. For localized excitons, the rates depend on T only through the T dependence of the exciton localization radius. For Stokes energy transfer, the dominant energy transfer occurs through a photon-exchange interaction, which enables the excitons from the higher-energy wells to decay into free electrons and holes in the lower-energy wells. The rate has a slow dependence on d, yielding reasonable agreement with recent data from GaAs/Al x Ga 1-x As quantum wells. The dipolar rate is about an order of magnitude smaller for large d (e.g., d=175Aa) with a stronger range dependence proportional to d -4 . However, the latter can be comparable to the radiative rate for small d (e.g., d≤80Aa). For anti-Stokes transfer through exchange-type (e.g., dipolar and photon-exchange) interactions, we show that thermal activation proportional to exp(-Δ/k B T) is essential for the transfer, contradicting a recent nonactivated result based on the Fo''rster-Dexter's spectral-overlap theory. Phonon-assisted transfer yields a negligibly small rate. On the other hand, energy transfer through over-barrier ionization of excitons via Auger processes yields a significantly larger nonactivated rate which is independent of d. The result is compared with recent data

Barriers to energy efficiency improvement. Empirical evidence from small-and-medium-sized enterprises in China

Energy Technology Data Exchange (ETDEWEB)

Kostka, Genia; Moslener, Ulf; Andreas, Jan G.

2012-07-01

This paper analyzes barriers for energy efficiency investments for small-and medium-sized enterprises (SMEs) in China. Based on a survey of 480 SMEs in Zhejiang Province, this study assesses financial, informational, and organizational barriers for energy efficiency investments in the SME sector. The conventional view has been that the lack of appropriate financing mechanisms particularly hinders SMEs to adopt cost-effective energy efficiency measures. As such, closing the financing gap for SMEs is seen as a prerequisite in order to promote energy efficiency in the sector. The econometric estimates of this study, however, suggest that access to information is an important determinant of investment outcomes, while this is less clear with respect to financial and organizational factors. More than 40 percent of enterprises in the sample declared that that they are not aware of energy saving equipments or practices in their respective business area, indicating that there are high transaction costs for SMEs to gather, assess, and apply information about energy saving potentials and relevant technologies. One implication is that the Chinese government may assume an active role in fostering the dissemination of energy-efficiency related information in the SME sector. (orig.)

Physical protection system using activated barriers

International Nuclear Information System (INIS)

Timm, R.E.; Zinneman, T.E.; Haumann, J.R.; Flaugher, H.A.; Reigle, D.L.

1984-03-01

The Argonne National Laboratory has recently installed an activated barrier, the Access Denial System, to upgrade its security. The technology of this system was developed in the late 70's by Sandia National Laboratory-Albuquerque. The Argonne National Laboratory is the first Department of Energy facility to use this device. Recent advancements in electronic components provide the total system support that makes the use of an activated barrier viable and desirable. The premise of an activated barrier is that it is deployed after a positive detection of an adversary is made and before the adversary can penetrate vital area. To accomplish this detection, sophisticated alarms, assessment, and communications must be integrated into a system that permits a security inspector to make a positive evaluation and to activate the barrier. The alarm sensor locations are selected to provide protection in depth. Closed circuit television is used with components that permit multiple video frames to be stored for automated, priority-based playback to the security inspector. Further, algorithms permit look-ahead surveillance of vital areas so that the security inspector can activate the access denial system in a timely manner and not be restricted to following the adversaries' penetration path(s)

The Schottky energy barrier dependence of charge injection in organic light-emitting diodes

Energy Technology Data Exchange (ETDEWEB)

Campbell, I.H.; Davids, P.S.; Smith, D.L. [Los Alamos National Laboratory, Los Alamos, New Mexico87545 (United States); Barashkov, N.N.; Ferraris, J.P. [The University of Texas at Dallas, Richardson, Texas75083 (United States)

1998-04-01

We present device model calculations of the current{endash}voltage (I{endash}V) characteristics of organic diodes and compare them with measurements of structures fabricated using MEH-PPV. The structures are designed so that all of the current is injected from one contact. The I{endash}V characteristics are considered as a function of the Schottky energy barrier to charge injection from the contact. Experimentally, the Schottky barrier is varied from essentially zero to more than 1 eV by using different metal contacts. A consistent description of the device I{endash}V characteristics is obtained as the Schottky barrier is varied from small values, less than about 0.4 eV, where the current flow is space-charge limited to larger values where it is contact limited. {copyright} {ital 1998 American Institute of Physics.}

Defect-driven inhomogeneities in Ni /4H-SiC Schottky barriers

Science.gov (United States)

Tumakha, S.; Ewing, D. J.; Porter, L. M.; Wahab, Q.; Ma, X.; Sudharshan, T. S.; Brillson, L. J.

2005-12-01

Nanoscale depth-resolved cathodoluminescence spectroscopy (DRCLS) of Ni diode arrays on 4H-SiC epitaxial wafers reveals a striking correspondence between deep level defects and electrical transport measurements on a diode-by-diode basis. Current-voltage measurements display both ideal and nonideal diode characteristics due to multiple barriers within individual contacts. Near-interface DRCLS demonstrates the presence of three discrete midgap defect levels with 2.2, 2.45, and 2.65eV emission energies whose concentrations vary on a submicron scale among and within individual diodes, correlating with barrier inhomogeneity. These results also suggest that SiC native defect levels can account for the maximum range of n-type barrier heights.

The Multiple Benefits of Measures to Improve Energy Efficiency

DEFF Research Database (Denmark)

Puig, Daniel; Farrell, Timothy Clifford

Understanding the barriers to, and enablers for, energy efficiency requires targeted information and analysis. This report is a summary of four detailed studies providing new insights on how to promote efficiency in selected priority areas. It complements initiatives such as the so-called energy...... efficiency accelerators, which seek to increase the uptake of selected technologies, as well as the work of many other institutions committed to improving energy efficiency. The modelling estimates and the case studies presented in this report illustrate that, while significant progress has already been...... achieved, the case for accelerating energy efficiency action is strong. Key highlights include: • At the global level, energy efficiency improvements would account for between 2.6 and 3.3 Gt CO2e of the reductions in 2030, equivalent to between 23 and 26 percent of the overall reductions achieved...

A novel method of calculating the energy deposition curve of nanosecond pulsed surface dielectric barrier discharge

International Nuclear Information System (INIS)

He, Kun; Wang, Xinying; Lu, Jiayu; Cui, Quansheng; Pang, Lei; Di, Dongxu; Zhang, Qiaogen

2015-01-01

To obtain the energy deposition curve is very important in the fields to which nanosecond pulse dielectric barrier discharges (NPDBDs) are applied. It helps the understanding of the discharge physics and fast gas heating. In this paper, an equivalent circuit model, composed of three capacitances, is introduced and a method of calculating the energy deposition curve is proposed for a nanosecond pulse surface dielectric barrier discharge (NPSDBD) plasma actuator. The capacitance C d and the energy deposition curve E R are determined by mathematically proving that the mapping from C d to E R is bijective and numerically searching one C d that satisfies the requirement for E R to be a monotonically non-decreasing function. It is found that the value of capacitance C d varies with the amplitude of applied pulse voltage due to the change of discharge area and is dependent on the polarity of applied voltage. The bijectiveness of the mapping from C d to E R in nanosecond pulse volumetric dielectric barrier discharge (NPVDBD) is demonstrated and the feasibility of the application of the new method to NPVDBD is validated. This preliminarily shows a high possibility of developing a unified approach to calculate the energy deposition curve in NPDBD. (paper)

Barriers to and drivers of the adpotion of energy crops by Swedish farmers: An empirical approach

Energy Technology Data Exchange (ETDEWEB)

Jonsson, Anna C.; Ostwald, Madelene; Asplund, Therese; Wibeck, Victoria (Linkoeping Univ., Linkoeping (Sweden). The Tema Inst., Centre for Climate Science and Policy Research)

2011-06-15

Since the Swedish government and the EU intend to encourage farmers to expand energy crop production, knowledge of the factors motivating adoption decisions is vital to policy success. Earlier studies have demonstrated that important barriers to farmer adoption of energy crops include converting from annual to perennial crops and from traditional crops or production systems to new ones. Economic motivations for changing production systems are strong, but factors such as values (e.g., aesthetics), knowledge (e.g., habits and knowledge of production methods), and legal conditions (e.g., cultivation licenses) are crucial for the change to energy crops. This paper helps fill gaps in the literature regarding why farmers decide to keep or change a production system. Based on a series of focus group interviews with Swedish farmers, the paper explores how farmers frame crop change decisions and what factors they consider most important. The main drivers of and barriers to growing energy crops, according to interviewees, are grouped and discussed in relation to four broad groups of motivational factors identified in the literature, i.e., values, legal conditions, knowledge, and economic factors. The paper ends by discussing whether some barriers could be overcome by policy changes at the national and European levels

Polymer in a pore: Effect of confinement on the free energy barrier

Science.gov (United States)

Kumar, Sanjiv; Kumar, Sanjay

2018-06-01

We investigate the transfer of a polymer chain from cis- side to trans- side through two types of pores: cone-shaped channel and flat-channel. Using the exact enumeration technique, we obtain the free energy landscapes of a polymer chain for such systems. We have also calculated the free-energy barrier of a polymer chain attached to the edge of the pore. The model system allows us to calculate the force required to pull polymer from the pore and stall-force to confine polymer within the pore.

How does incomplete fusion show up at slightly above barrier energies?

Directory of Open Access Journals (Sweden)

Prasad R.

2012-02-01

Full Text Available Experimental results on the onset of incomplete fusion at slightly above barrier energies are discussed in this paper. Spin-distributions of evaporation residues populated via complete and/or incomplete fusion of 12C,16O (Elab ≈ 4–7 MeV with 169Tm have been measured to probe associated ℓ–values. Particle (Z=1,2 – γ – coincidence technique has been used for channel selection. Entirely different entry state spin populations have been observed during the de-excitation of complete and incomplete composites. The complete fusion residues are found to be strongly fed over a broad spin range. While, a narrow range feeding for only high spin states has been observed in case of incomplete fusion residues. In the present work, incomplete fusion is shown to be a promising tool to populate high spin states in final reaction products. For better insight into the onset and strength of incomplete fusion, the relative contributions of complete and incomplete fusion have been deduced from the analysis of excitation functions and forward recoil ranges. A significant fraction of ICF has been observed even at energy as low as ≈ 7% above the barrier. The relative strengths of complete and incomplete fusion deduced from the analysis of forward-recoil-ranges and excitation functions complement each other. All the available results are discussed in light of the Morgenstern’s mass-asymmetry systematics. Incomplete fusion fraction is found to be large for more mass-asymmetric systems for individual projectiles, which points towards the projectile structure effect on incomplete fusion fraction. Experimentally measured forward ranges of recoils complement the existence of incomplete fusion at slightly above barrier energies, where more than one linear-momentum-transfer components associated with full- and/or partial-fusion of projectile(s have been observed. Present results conclusively demonstrate the possibility to selectively populate high spin states

Capabilities of silicon Shottki barriers and planar detectors in low-energy proton spectometry

Energy Technology Data Exchange (ETDEWEB)

Verbitskaya, E M; Eremin, V K; Malyarenko, A M; Sakharov, V I; Serenkov, I T; Strokan, N B; Sukhanov, V L

1987-05-12

Dependence of the resolution of surface barrier and planar diffusion silicon detectors on proton energy is investigated. The experiment was conducted at the device, representing the double mass spectrometer with the maximal energy of single-charged ions up to 200 keV. Two advantages of using planar diffusion detectors for light low-energy ion spectrometry is established: high energy resolution and independence of signal amplitude of bias voltage. Background noise represents the main factor dictaiting resolution, but fluctuations of losses in input window are sufficient as well. It was concluded that planar detector application for spectrometry of protons with energy of less than 200 keV would improve the resolution up to 2.2 keV without detector cooling.

Multiplicity distributions in high-energy neutrino interactions

International Nuclear Information System (INIS)

Chapman, J.W.; Coffin, C.T.; Diamond, R.N.; French, H.; Louis, W.; Roe, B.P.; Seidl, A.A.; Vander Velde, J.C.; Berge, J.P.; Bogert, D.V.; DiBianca, F.A.; Cundy, D.C.; Dunaitsev, A.; Efremenko, V.; Ermolov, P.; Fowler, W.; Hanft, R.; Harigel, G.; Huson, F.R.; Kolganov, V.; Mukhin, A.; Nezrick, F.A.; Rjabov, Y.; Scott, W.G.; Smart, W.

1976-01-01

Results from the Fermilab 15-ft bubble chamber on the charged-particle multiplicity distributions produced in high-energy charged-current neutrino-proton interactions are presented. Comparisons are made to γp, ep, μp, and inclusive pp scattering. The mean hadronic multiplicity appears to depend only on the mass of the excited hadronic state, independent of the mode of excitation. A fit to the neutrino data gives = (1.09+-0.38) +(1.09+-0.03)lnW 2

Ultrastructural evaluation of multiple pass low energy versus single pass high energy radio-frequency treatment.

Science.gov (United States)

Kist, David; Burns, A Jay; Sanner, Roth; Counters, Jeff; Zelickson, Brian

2006-02-01

The radio-frequency (RF) device is a system capable of volumetric heating of the mid to deep dermis and selective heating of the fibrous septa strands and fascia layer. Clinically, these effects promote dermal collagen production, and tightening of these deep subcutaneous structures. A new technique of using multiple low energy passes has been described which results in lower patient discomfort and fewer side effects. This technique has also been anecdotally described as giving more reproducible and reliable clinical results of tissue tightening and contouring. This study will compare ultrastructural changes in collagen between a single pass high energy versus up to five passes of a multiple pass lower energy treatment. Three subjects were consented and treated in the preauricular region with the RF device using single or multiple passes (three or five) in the same 1.5 cm(2) treatment area with a slight delay between passes to allow tissue cooling. Biopsies from each treatment region and a control biopsy were taken immediately, 24 hours or 6 months post treatment for electron microscopic examination of the 0-1 mm and 1-2 mm levels. Sections of tissue 1 mm x 1 mm x 80 nm were examined with an RCA EMU-4 Transmission Electron Microscope. Twenty sections from 6 blocks from each 1 mm depth were examined by 2 blinded observers. The morphology and degree of collagen change in relation to area examined was compared to the control tissue, and estimated using a quantitative scale. Ultrastructural examination of tissue showed that an increased amount of collagen fibril changes with increasing passes at energies of 97 J (three passes) and 122 J (five passes), respectively. The changes seen after five multiple passes were similar to those detected after much more painful single pass high-energy treatments. This ultrastructural study shows changes in collagen fibril morphology with an increased effect demonstrated at greater depths of the skin with multiple low-fluence passes

Reduction of the energy of secondary beams down to the Coulomb barrier

International Nuclear Information System (INIS)

Yang Yong Feng; Mittig, W.; Roussel-Chomaz, P.; Lewitowicz, M.; Sida, J.L.; Alamanos, N.; Auger, F.; Gillibert, A.; Volant, C.; Cabot, C.; Borcea, C.

1993-01-01

With the doubly achromatic spectrometer LISE at GANIL, the energy of a secondary 11 Be beam produced by the reaction of 63 MeV/nucleon 18 O with a 9 Be target has been reduced to Coulomb barrier energies using various thick targets and a thinner target plus a thick degrader. The experimental results were compared with calculations performed with the program INTENSITY and with simple analytical expressions. It was found that in the present device, the thick target method is more convenient and efficient than the achromatic degrader

Testing Convergence of Different Free-Energy Methods in a Simple Analytical System with Hidden Barriers

Directory of Open Access Journals (Sweden)

S. Alexis Paz

2018-03-01

Full Text Available In this work, we study the influence of hidden barriers on the convergence behavior of three free-energy calculation methods: well-tempered metadynamics (WTMD, adaptive-biasing forces (ABF, and on-the-fly parameterization (OTFP. We construct a simple two-dimensional potential-energy surfaces (PES that allows for an exact analytical result for the free-energy in any one-dimensional order parameter. Then we chose different CV definitions and PES parameters to create three different systems with increasing sampling challenges. We find that all three methods are not greatly affected by the hidden-barriers in the simplest case considered. The adaptive sampling methods show faster sampling while the auxiliary high-friction requirement of OTFP makes it slower for this case. However, a slight change in the CV definition has a strong impact in the ABF and WTMD performance, illustrating the importance of choosing suitable collective variables.

Transportation Energy Futures Series: Non-Cost Barriers to Consumer Adoption of New Light-Duty Vehicle Technologies

Energy Technology Data Exchange (ETDEWEB)

Stephens, T.

2013-03-01

Consumer preferences are key to the adoption of new vehicle technologies. Barriers to consumer adoption include price and other obstacles, such as limited driving range and charging infrastructure; unfamiliarity with the technology and uncertainty about direct benefits; limited makes and models with the technology; reputation or perception of the technology; standardization issues; and regulations. For each of these non-cost barriers, this report estimates an effective cost and summarizes underlying influences on consumer preferences, approximate magnitude and relative severity, and assesses potential actions, based on a comprehensive literature review. While the report concludes that non-cost barriers are significant, effective cost and potential market share are very uncertain. Policies and programs including opportunities for drivers to test drive advanced vehicles, general public outreach and information programs, incentives for providing charging and fueling infrastructure, and development of technology standards were examined for their ability to address barriers, but little quantitative data exists on the effectiveness of these measures. This is one in a series of reports produced as a result of the Transportation Energy Futures project, a Department of Energy-sponsored multi-agency effort to pinpoint underexplored strategies for reducing GHGs and petroleum dependence related to transportation.

Proton multiplicity distributions in high-energy hadron-nuclei collisions

International Nuclear Information System (INIS)

Strugalski, Z.

1979-01-01

The fast proton emission process is analyzed in high-energy hadron-nuclei collisions. The formula describing the proton multiplicity distributions is derived. It describes well enough the proton multiplicity distribution of pion-nuclei and proton-nuclei collisions at 200 and 400 GeV

Fusion enhancement at near and sub-barrier energies in {sup 19}O + {sup 12}C

Energy Technology Data Exchange (ETDEWEB)

Singh, Varinderjit; Vadas, J.; Steinbach, T.K.; Wiggins, B.B.; Hudan, S. [Department of Chemistry and Center for Exploration of Energy and Matter, Indiana University, 2401 Milo B. Sampson Lane, Bloomington, IN 47408 (United States); Souza, R.T. de, E-mail: deSouza@indiana.edu [Department of Chemistry and Center for Exploration of Energy and Matter, Indiana University, 2401 Milo B. Sampson Lane, Bloomington, IN 47408 (United States); Lin, Zidu; Horowitz, C.J. [Department of Physics and Center for Exploration of Energy and Matter, Indiana University, 2401 Milo B. Sampson Lane, Bloomington, IN 47408 (United States); Baby, L.T.; Kuvin, S.A.; Tripathi, Vandana; Wiedenhöver, I. [Department of Physics, Florida State University, Tallahassee, FL 32306 (United States); Umar, A.S. [Department of Physics and Astronomy, Vanderbilt University, Nashville, TN 37235 (United States)

2017-02-10

Measuring the fusion excitation function for an isotopic chain of projectile nuclei provides a stringent test of a microscopic description of fusion. We report the first measurement of the fusion excitation function at near-barrier energies for the {sup 19}O + {sup 12}C system. The measured excitation function is compared with the fusion excitation function of {sup 18}O + {sup 12}C. A significant enhancement in the fusion probability of {sup 19}O ions with a {sup 12}C target as compared to {sup 18}O ions is observed. The experimental cross-sections observed at near-barrier energies are compared with a state-of-the-art microscopic model.

Multiple-choice test of energy and momentum concepts

OpenAIRE

Singh, Chandralekha; Rosengrant, David

2016-01-01

We investigate student understanding of energy and momentum concepts at the level of introductory physics by designing and administering a 25-item multiple choice test and conducting individual interviews. We find that most students have difficulty in qualitatively interpreting basic principles related to energy and momentum and in applying them in physical situations.

Energy SMEs in sub-Saharan Africa: Outcomes, barriers and prospects in Ghana, Senegal, Tanzania and Zambia

Energy Technology Data Exchange (ETDEWEB)

Haselip, J. A.; Desgain, D.; Mackenzie, G. A.

2013-05-15

This report presents the findings of research into the main outcomes of government and donor-backed efforts to promote small and medium-sized energy businesses (energy SMEs) in sub-Saharan Africa. The research follows an outcome analysis methodology. The focus is on four countries: Ghana, Senegal, Tanzania and Zambia and primarily on UNEP's AREED programme (2002-2012). This research focuses on the 'contributing factors' - a deliberately broader term that incorporates the internal 'success factors' - for energy SMEs, about which much has already been written. Indeed, the research findings presented in this report reaffirm most of what has been concluded in previous studies. These studies identified the lack of access to affordable finance as being the predominant, persistent, barrier to establishing and scaling up a commercially viable energy SME sector, emphasising the lack of strong policy support from governments, poor business skills capacity and the high cost of many RETs as related cause-and-effect barriers. While these issues continue to characterise, to a greater or lesser extent, the energy SMEs sectors in the countries studied for this research, it is more relevant to revisit the main assumption behind AREED and other donor-backed programmes designed to promote energy SMEs. The assumption is that the solution to the aforementioned barriers would be overcome by a 'demonstration effect' whereby successful energy SMEs, supported by donor-backed programmes, influence the commercial financial sector to invest in energy SMEs, thus triggering a virtuous circle of growth and profitability. Experiences drawn from a decade of AREED support across four of the project countries reveal both the presence (Ghana, Senegal) and absence, or weak presence, of this demonstration effect (Tanzania, Zambia). This is a central question, and one which was not the focus of previous research, presumably because the answer was not fully apparent prior to 2006 when the last

Partitioning of methyl internal rotational barrier energy of ...

Indian Academy of Sciences (India)

The nature of methyl internal rotational barrier in thioacetaldehyde has been investigated by relaxation effect, natural bond orbital (NBO) analysis and Pauling exchange interactions. The true experimental barrier can be obtained by considering fully relaxed rotation. Nuclear-electron attraction term is a barrier forming term in ...

Low Li+ Insertion Barrier Carbon for High Energy Efficient Lithium-Ion Capacitor.

Science.gov (United States)

Lee, Wee Siang Vincent; Huang, Xiaolei; Tan, Teck Leong; Xue, Jun Min

2018-01-17

Lithium-ion capacitor (LIC) is an attractive energy-storage device (ESD) that promises high energy density at moderate power density. However, the key challenge in its design is the low energy efficient negative electrode, which barred the realization of such research system in fulfilling the current ESD technological inadequacy due to its poor overall energy efficiency. Large voltage hysteresis is the main issue behind high energy density alloying/conversion-type materials, which reduces the electrode energy efficiency. Insertion-type material though averted in most research due to the low capacity remains to be highly favorable in commercial application due to its lower voltage hysteresis. To further reduce voltage hysteresis and increase capacity, amorphous carbon with wider interlayer spacing has been demonstrated in the simulation result to significantly reduce Li + insertion barrier. Hence, by employing such amorphous carbon, together with disordered carbon positive electrode, a high energy efficient LIC with round-trip energy efficiency of 84.3% with a maximum energy density of 133 Wh kg -1 at low power density of 210 W kg -1 can be achieved.

SOLPLAN Report: An Assessment of Barriers and Incentives to Conservation and Alternative-Energy Use in the Residential Sector in Wisconsin

Energy Technology Data Exchange (ETDEWEB)

Fulenwider, Claire K.; Weiss, Lonnie S.; Pfefferkorn, Carol; Wiener, Don E.; Feldman, Stephen L.

1981-03-01

The Alternative Energy Policy Project of the Wisconsin Center for Public Policy focused upon two principle objectives: (1) gathering and analyzing new and previously unavailable data on barriers and incentives to greater energy conservation and alternative energy commercialization in the state of Wisconsin; and (2) building consensus around alternative energy policy to develop guidelines for alternative energy policy for the state. Particular attention was paid to public involvement in the policy process and to assessing barriers and incentives from as many key sectors of the energy field as possible. Thus, data were gathered from the general public, alternative energy users, the heating industry generally, the alternative-energy industry specifically, and key decision makers. The report is divided into four principal sections. The first looks at findings and analyses dealing with barriers to greater conservation and alternative energy use. Incentives for accelerating the extent of residential conservation and alternative energy use are discussed in the second section. The decision-making process itself in energy policy has been little analyzed and seldom documented. The role of consensus-building in the alternative-energy field and analysis of the decision-making process are discussed in Section III. Appendices in Section IV provide survey instruments and descriptions, a compendium of energy-related legislation developed within the project, and various reports. The total report reflects the interactive decision-making model as it was applied in SOLPLAN. (MCW)

A new perspective on anisotropy and multiple energy gaps in superconductors

International Nuclear Information System (INIS)

Milkove, K.R.; Bostock, J.; MacVicar, M.L.A.

1976-01-01

New perspective on superconducting anisotropy and multiple energy gaps: direct experimental evidence shows that widely accepted anisotropy and multiple energy gap interpretations of tunneling data are consistent with a voltage divider model and may not relate to intrinsic superconducting properties. The model also accounts for other common data anomalies. (author)

Scaling of chaotic multiplicity: A new observation in high-energy interactions

International Nuclear Information System (INIS)

Ghosh, D.; Ghosh, P.; Roy, J.

1990-01-01

We analyze high-energy-interaction data to study the dependence of chaotic multiplicity on the pseudorapidity window and propose a new scaling function bar Ψ(bar z)=left-angle n 1 right-angle/left-angle n right-angle max where left-angle n 1 right-angle is the chaotic multiplicity and bar z=left-angle n right-angle/left-angle n right-angle max is the reduced multiplicity, following the quantum-optical concept of particle production. It has been observed that the proposed ''chaotic multiplicity scaling'' is obeyed by pp, p bar p, and AA collisions at different available energies

Assessing the Multiple Benefits of Clean Energy Chapter 1: Introduction

Science.gov (United States)

Chapter 1 of “Assessing the Multiple Benefits of Clean Energy” provides an introduction to the document. /meta name=DC.title content=Assessing the Multiple Benefits of Clean Energy Chapter 1: Introduction

Bridges or Barriers? Conceptualization of the Role of Multiple Identity Gateway Groups in Intergroup Relations

Directory of Open Access Journals (Sweden)

Aharon Levy

2017-06-01

Full Text Available The modern era of globalization has been accompanied by a massive growth in interconnections between groups, and has led to the sharing of multiple identities by individuals and groups. Following these developments, research has focused on the issue of multiple identities, and has shed important light on how individuals who hold these complex forms of identity feel and behave, and on the reactions they elicit from members of other groups. However, the potential of groups with such multiple identities (e.g., biracials, immigrants, etc. to affect the intergroup relations between the groups that represent the respective sources of the different identities (e.g., Blacks and Whites, country of origin and country of residence, etc. has not been examined to date. Accordingly, in this paper, we first systematically explore the potential of groups in which people identify with multiple social categories, or groups that are perceived as such by others, to play a role in intergroup dynamics. Next, we offer a theoretical framework outlining what functions groups of people with shared multiple identities may serve (as bridges or barriers by proposing how their presence may facilitate or deteriorate intergroup relations. Finally, we present recent empirical research examining how groups of people with shared multiple identities can act as gateways and bridge the cleft between two separate groups that represent the respective sources of their different identities, and discuss the theoretical and practical implications for the field of intergroup relations.

Liquid-drop model description of heavy ion fusion at sub-barrier energies

Energy Technology Data Exchange (ETDEWEB)

Aguiar, C E; Barbosa, V C; Canto, L F; Donangelo, R

1987-10-05

The enhancement of the heavy ion fusion cross section at sub-barrier energies is studied in the liquid-drop model approach. The shape of the system is described by two spheres smoothly connected by a neck, and the kinetic and potential energies are calculated within this parametrization. Underbarrier fusion cross sections for symmetric projectile-target combinations are calculated in the WKB approximation and a comparison with the available data is made. The agreement is quite satisfactory, except for those systems in which the reaction is strongly affected by the details of the nuclear structure of the collision partners.

Potential and barrier study. Energy efficiency of Norwegian homes; Potensial- og barrierestudie. Energieffektivisering av norske boliger

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-07-01

Enova has identified potentials and barriers for energy efficiency in Norwegian buildings. This report summarizes the results of this work. Efficient energy in buildings is important to ensure that future economic activity and growth can occur in a way that reduces the possibilities for an environmentally and economically sound development. (eb)

Perceived barriers to physical activity among Polish adolescents.

Science.gov (United States)

Jodkowska, Maria; Mazur, Joanna; Oblacińska, Anna

2015-01-01

To identify barriers to physical activity (PA) for adolescents according to the gender and age and examine the association between these barriers and youths' physical activity. 3346 students aged 10-16 years (1759 girls) took part in the cross-sectional, nationally representative study. For this paper the dataset was created from adolescents who reported perceived barriers to PA, N = 2300, (1259 girls), range 13-16 years. Barriers and physical activity (MVPA) were analysed for all participants, as well as by gender, age group and place of residence. Multiple regression analysis was used to examine the relationships between perceived barriers and physical inactivity for all and than separately for boys and girls. Lack of energy, lack of time and lack of support were three of the five barriers reported by more than 40% of adolescents, statistically more likely by girls than boys and older youth than younger. For boys - lack of time (OR = 2.56; CI = 1.66-3.96), lack of skills (OR = 2.35; CI = 1.94-3.95), lack of willpower (OR = 1.71, CI = 1.05-2.80) and lack of support (OR = 1.64, CI = 1.11-2.41) were the predictors contributing to low level of PA. For girls lack of skills (OR = 3.16, CI = 1.62-6.18), lack of energy (OR = 1.84, CI = 1.14-2.96), lack of support (OR = 1.64, CI = 1.07-2.54) and lack of time (OR = 1.61,CI = 1.00-2.60) were positively and statistically significant associated with physical inactivity. 1. Perceived barriers to physical activity among adolescents have strong negative impact on recommended PA level. For girls lack of skills is the strongest predictor of low PA, for boys - lack of time. 2. Identification more precisely barriers to physical activity among adolescents will enable to developed more effective interventions in high-risk populations.

Recent experimental studies of edge and internal transport barriers in the DIII-D tokamak

International Nuclear Information System (INIS)

Gohil, P; Baylor, L R; Burrell, K H; Casper, T A; Doyle, E J; Greenfield, C M; Jernigan, T C; Kinsey, J E; Lasnier, C J; Moyer, R A; Murakami, M; Rhodes, T L; Rudakov, D L; Staebler, G M; Wang, G; Watkins, J G; West, W P; Zeng, L

2003-01-01

Results from recent experiments on the DIII-D tokamak have revealed many important details on transport barriers at the plasma edge and in the plasma core. These experiments include: (a) the formation of the H-mode edge barrier directly by pellet injection; (b) the formation of a quiescent H-mode edge barrier (QH-mode) which is free from edge localized modes, but which still exhibits good density and radiative power control; (c) the formation of multiple transport barriers, such as the quiescent double barrier (QDB) which combines an internal transport barrier with the quiescent H-mode edge barrier. Results from the pellet-induced H-mode experiments indicate that: (a) the edge temperature (electron or ion) does not need to attain a critical value for the formation of the H-mode barrier, (b) pellet injection leads to an increased gradient in the radial electric field, E r , at the plasma edge; (c) the experimentally determined edge parameters at barrier transition are well below the predictions of several theories on the formation of the H-mode barrier, (d) pellet injection can lower the threshold power required to form the H-mode barrier. The quiescent H-mode barrier exhibits good density control as the result of continuous magnetohydrodynamic activity at the plasma edge called the edge harmonic oscillation (EHO). The EHO enhances the edge particle transport whilst maintaining a good energy transport barrier. The ability to produce multiple barriers in the QDB regime has led to long duration, high-performance plasmas with β N H 89 values of 7 for up to 10 times the confinement time. Density profile control in the plasma core of QDB plasmas has been demonstrated using on-axis electron cyclotron heating

Measurement of Fission Fragment Angular Distributions for 14 N+ 232 Th and 11 B+ 235 U at Near-Barrier Energies

International Nuclear Information System (INIS)

Behera, B.R.; Jena, S.; Satapathy, M.; Ison, V.V.; Kailas, S.; Chatterjee, A.; Shrivastava, A.; Mahata, K.; Satpathy, L.; Basu, P.; Roy, S.; Sharan, M.; Chatterjee, M.L; Datta, S.K.

2000-01-01

Fission fragment angular distributions of heavy-ion induced fission in actinide nuclei at near-barrier energies show anomalous fragment anisotropies. At above barrier energies entrance channel dependence is a probable cause and explanation in terms of pre-equilibrium fission and the critical mass asymmetry parameter (Businaro-Gallone) has been tried. Target deformation and ground state spin also seem to influence the measured anisotropy. To understand the extent of importance of some or all of these features, we performed a set of experiments where (i) entrance channel dependence (ii) mass asymmetry on the two sides of Businaro-Gallone and (iii) different ground state spins are present. The channels chosen are 14 N+ 232 Th and 11 B+ 235 U. Experiments were done using the Pelletron accelerators at NSC, New Delhi and BARC-TIFR, Bombay. Compound nucleus populated in both cases is 246 Bk. 232 Th has ground state spin zero and 235 U has spin 7/2. Fragment anisotropies have been measured from 10-15 % above barrier to 10 % below barrier at similar excitation energy (around 40 MeV to 58 MeV). The mean square angular momentum is matched at least at one energy. Results indicate that when both excitation energy and angular momentum are matched, there are differences in the measured values of fission anisotropies. This implies entrance channel dependence consistent with the expectation of pre-equilibrium fission model. (authors)

A coagulation-powdered activated carbon-ultrafiltration - Multiple barrier approach for removing toxins from two Australian cyanobacterial blooms

International Nuclear Information System (INIS)

Dixon, Mike B.; Richard, Yann; Ho, Lionel; Chow, Christopher W.K.; O'Neill, Brian K.; Newcombe, Gayle

2011-01-01

Cyanobacteria are a major problem for the world wide water industry as they can produce metabolites toxic to humans in addition to taste and odour compounds that make drinking water aesthetically displeasing. Removal of cyanobacterial toxins from drinking water is important to avoid serious illness in consumers. This objective can be confidently achieved through the application of the multiple barrier approach to drinking water quality and safety. In this study the use of a multiple barrier approach incorporating coagulation, powdered activated carbon (PAC) and ultrafiltration (UF) was investigated for the removal of intracellular and extracellular cyanobacterial toxins from two naturally occurring blooms in South Australia. Also investigated was the impact of these treatments on the UF flux. In this multibarrier approach, coagulation was used to remove the cells and thus the intracellular toxin while PAC was used for extracellular toxin adsorption and finally the UF was used for floc, PAC and cell removal. Cyanobacterial cells were completely removed using the UF membrane alone and when used in conjunction with coagulation. Extracellular toxins were removed to varying degrees by PAC addition. UF flux deteriorated dramatically during a trial with a very high cell concentration; however, the flux was improved by coagulation and PAC addition.

Factors Affecting Energy Barriers for Pyramidal Inversion in Amines and Phosphines: A Computational Chemistry Lab Exercise

Science.gov (United States)

Montgomery, Craig D.

2013-01-01

An undergraduate exercise in computational chemistry that investigates the energy barrier for pyramidal inversion of amines and phosphines is presented. Semiempirical calculations (PM3) of the ground-state and transition-state energies for NR[superscript 1]R[superscript 2]R[superscript 3] and PR[superscript 1]R[superscript 2]R[superscript 3] allow…

Origins and implications of temperature-dependent activation energy barriers for dislocation nucleation in face-centered cubic metals

International Nuclear Information System (INIS)

Warner, D.H.; Curtin, W.A.

2009-01-01

The linking of atomistic simulations of stress-driven processes to experimentally observed mechanical behavior via the computation of activation energy barriers is a topic of intense current research. Using dislocation nucleation from a crack tip as the reaction process, long-time multiscale molecular dynamics simulations show that the activation barrier can exhibit significant temperature dependence. Using an analytic model for the nucleation process and computing the relevant material properties (elastic constants and stacking fault energies), the temperature dependence is shown to arise primarily from the temperature dependence of the material parameters for both Al and Ni. After thermally activated emission of the first partial dislocation, there is then a competition between two other thermally activated processes: twinning and full dislocation emission. Because the activation barriers depend on temperature, this transition is more complex than usually envisioned. Simulations in Al reveal that a transition from twinning to full dislocation emission back to twinning occurs with increasing temperature, which is counter to traditional metallurgical wisdom. Temperature-dependent activation energies are thus essential to accurate understanding and prediction of those phenomena that control fracture and deformation in metals at realistic loading rates.

An entropic barriers diffusion theory of decision-making in multiple alternative tasks.

Directory of Open Access Journals (Sweden)

Diego Fernandez Slezak

2018-03-01

Full Text Available We present a theory of decision-making in the presence of multiple choices that departs from traditional approaches by explicitly incorporating entropic barriers in a stochastic search process. We analyze response time data from an on-line repository of 15 million blitz chess games, and show that our model fits not just the mean and variance, but the entire response time distribution (over several response-time orders of magnitude at every stage of the game. We apply the model to show that (a higher cognitive expertise corresponds to the exploration of more complex solution spaces, and (b reaction times of users at an on-line buying website can be similarly explained. Our model can be seen as a synergy between diffusion models used to model simple two-choice decision-making and planning agents in complex problem solving.

Centrality dependence of multiplicity, transverse energy, and elliptic flow from hydrodynamics

Energy Technology Data Exchange (ETDEWEB)

Kolb, Peter F.; Heinz, Ulrich; Huovinen, Pasi; Eskola, Kari J.; Tuominen, Kimmo

2001-03-21

The centrality dependence of the charged multiplicity, transverse energy, and elliptic flow coefficient is studied in a hydrodynamic model, using a variety of different initializations which model the initial energy or entropy production process as a hard or soft process, respectively. While the charged multiplicity depends strongly on the chosen initialization, the p{sub T}-integrated elliptic flow for charged particles as a function of charged particle multiplicity and the p{sub T}-differential elliptic flow for charged particles in minimum bias events turn out to be almost independent of the initialization.

Multiple Timescale Energy Scheduling for Wireless Communication with Energy Harvesting Devices

Directory of Open Access Journals (Sweden)

H. Xiao

2012-09-01

Full Text Available The primary challenge in wireless communication with energy harvesting devices is to efficiently utilize the harvesting energy such that the data packet transmission could be supported. This challenge stems from not only QoS requirement imposed by the wireless communication application, but also the energy harvesting dynamics and the limited battery capacity. Traditional solar predictable energy harvesting models are perturbed by prediction errors, which could deteriorate the energy management algorithms based on this models. To cope with these issues, we first propose in this paper a non-homogenous Markov chain model based on experimental data, which can accurately describe the solar energy harvesting process in contrast to traditional predictable energy models. Due to different timescale between the energy harvesting process and the wireless data transmission process, we propose a general framework of multiple timescale Markov decision process (MMDP model to formulate the joint energy scheduling and transmission control problem under different timescales. We then derive the optimal control policies via a joint dynamic programming and value iteration approach. Extensive simulations are carried out to study the performances of the proposed schemes.

Tunnel superpenetrability of potential barriers

International Nuclear Information System (INIS)

Zakhariev, B N.

1982-01-01

The transmission of two particles through the same barrier is considered. The limiting cases are compared when the particles are joined together in a single particle with double mass-energy and potential and when they pass the barrier independently. As an intermediate case a pair of particles bound in a quasideuteron of a finite size is considered. It is shown that long-range collective correlations of particles (of the superfluidity type and others) simplify very much for them passing through high potential barriers. This happens due to the transfer of the additional energy from the particles outside the barriers to those inside it

Temperature dependence of the distribution of the thermally activated energy barriers in Tl2Ba2CaCu2O8 film

International Nuclear Information System (INIS)

Ren, C.; Lin, F.Y.; Ding, S.Y.; Li, Z.M.; Aruna, S.A.; Qiu, L.; Yao, X.X.; Yan, S.L.; Si, M.S.

1999-01-01

The effects of frequency and ac amplitude on ac susceptibility have been measured for a thin Tl 2 Ba 2 CaCu 2 O 8 film in the range 100 Hz-100 kHz in magnetic field 0.52 T. A phenomenological equation with an asymmetrical distribution of thermally activated energy barriers has been used to analyse these frequency and amplitude dependences of the ac susceptibility χ(ω,h ac ) in the vicinity of the peak temperature of χ''. We obtain the effective energy barrier U against amplitude h ac (current density j): U h ac -0.38 . This U(j) relationship shows that the flux lines are in the 3D collective creep regime. Therefore, we conclude that the effective energy barrier is in fact an average of the barrier's distribution, and the distribution function is a distinguished asymmetrical one in this 3D collective creep regime. (author)

US-China Clean Energy Research Center on Building Energy Efficiency: Materials that Improve the Cost-Effectiveness of Air Barrier Systems

Energy Technology Data Exchange (ETDEWEB)

Hun, Diana E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-12-01

The US–China Clean Energy Research Center (CERC) was launched in 2009 by US Energy Secretary Steven Chu, Chinese Minister of Science and Technology Wan Gang, and Chinese National Energy Agency Administrator Zhang Guobao. This 5-year collaboration emerged from the fact that the United States and China are the world’s largest energy producers, energy consumers, and greenhouse gas emitters, and that their joint effort could have significant positive repercussions worldwide. CERC’s main goal is to develop and deploy clean energy technologies that will help both countries meet energy and climate challenges. Three consortia were established to address the most pressing energy-related research areas: Advanced Coal Technology, Clean Vehicles, and Building Energy Efficiency (BEE). The project discussed in this report was part of the CERC-BEE consortia; its objective was to lower energy use in buildings by developing and evaluating technologies that improve the cost-effectiveness of air barrier systems for building envelopes.

Barriers and drivers for energy efficiency : Different perspectives from an exploratory study in the Netherlands

NARCIS (Netherlands)

Cagno, Enrico; Trianni, Andrea; Worrell, Ernst; Miggiano, Federica

2014-01-01

Increased energy efficiency represents a crucial opportunity for European industrial sustainability, but several barriers still need to be tackled, as recent policies have not often succeeded as expected. Thus, it is crucial to understand the existing mismatches between the perception of

Market and behavioral barriers to energy efficiency: A preliminary evaluation of the case for tariff financing in California

Energy Technology Data Exchange (ETDEWEB)

Fujita, K. Sydny

2011-06-23

Consumers regularly forgo purchases of high efficiency appliances that appear to be cost effective at a reasonable rate of return. While some argue that this is a true revelation of preferences for appliance features, this 'efficiency gap' can be largely explained by a combination of market and behavioral failures that reduce consumers ability to evaluate the relative value of appliances and skew preferences toward initial cost savings, undervaluing future reductions in operating costs. These failures and barriers include externalities of energy use, imperfect competition between manufacturers, asymmetric information, bounded rationality, split incentives, and transaction costs (Golove 1996). Recognizing the social benefit of energy conservation, several major methods are used by policymakers to ensure that efficient appliances are purchased: minimum efficiency standards, Energy Star labeling, and rebates and tax credits. There is no single market for energy services; there are hundreds of uses, thousands of intermediaries, and millions of users, and likewise, no single appropriate government intervention (Golove 1996). Complementary approaches must be implemented, considering policy and institutional limitations. In this paper, I first lay out the rationale for government intervention by addressing the market and behavioral failures and barriers that arise in the context of residential energy efficiency. I then consider the ways in which some of these failures and barriers are addressed through major federal programs and state and utility level programs that leverage them, as well as identifying barriers that are not addressed by currently implemented programs. Heterogeneity of consumers, lack of financing options, and split incentives of landlords and tenants contribute significantly to the under-adoption of efficient appliances. To quantify the size of the market most affected by these barriers, I estimate the number of appliances, and in particular

Barriers on the propagation of renewable energy sources and sustainable solid waste management practices in Greece.

Science.gov (United States)

Boemi, Sn; Papadopoulos, Am; Karagiannidis, A; Kontogianni, S

2010-11-01

Renewable energy sources (RES), excluding large hydroelectric plants, currently produce 4.21% of total electricity production in Greece. Even when considering the additional production from large hydroelectric plants, which accounts for some 7.8%, the distance to be covered towards the objective of 20% electricity produced from RES by 2010 and respectively towards 20% of total energy production by 2020 is discouraging. The potential, however, does exist; unfortunately so do serious barriers. On the other hand, solid waste management (SWM) is an issue that generates continuously increasing interest due to the extra amounts of solid waste generated; the lack of existing disposal facilities with adequate infrastructure and integrated management plans, also often accompanied by legislative and institutional gaps. However, socio-economic and public awareness problems are still met in the planning and implementation of RES and SWM projects, together with the lack of a complete national cadastre and a spatial development master plan, specifying areas eligible for RES and SWM development. Specific barriers occur for individual RES and the on-going inclusion of waste-derived renewable energy in the examined palette further increases the complexity of the entire issue. The consolidated study of this broad set of barriers was a main task of the present study which was carried out within the frame of a Hellenic-Canadian research project; the main results will be discussed herein.

Simulations of skin barrier function: free energies of hydrophobic and hydrophilic transmembrane pores in ceramide bilayers.

Science.gov (United States)

Notman, Rebecca; Anwar, Jamshed; Briels, W J; Noro, Massimo G; den Otter, Wouter K

2008-11-15

Transmembrane pore formation is central to many biological processes such as ion transport, cell fusion, and viral infection. Furthermore, pore formation in the ceramide bilayers of the stratum corneum may be an important mechanism by which penetration enhancers such as dimethylsulfoxide (DMSO) weaken the barrier function of the skin. We have used the potential of mean constraint force (PMCF) method to calculate the free energy of pore formation in ceramide bilayers in both the innate gel phase and in the DMSO-induced fluidized state. Our simulations show that the fluid phase bilayers form archetypal water-filled hydrophilic pores similar to those observed in phospholipid bilayers. In contrast, the rigid gel-phase bilayers develop hydrophobic pores. At the relatively small pore diameters studied here, the hydrophobic pores are empty rather than filled with bulk water, suggesting that they do not compromise the barrier function of ceramide membranes. A phenomenological analysis suggests that these vapor pores are stable, below a critical radius, because the penalty of creating water-vapor and tail-vapor interfaces is lower than that of directly exposing the strongly hydrophobic tails to water. The PMCF free energy profile of the vapor pore supports this analysis. The simulations indicate that high DMSO concentrations drastically impair the barrier function of the skin by strongly reducing the free energy required for pore opening.

Effects of InGaN barriers with low indium content on internal quantum efficiency of blue InGaN multiple quantum wells

International Nuclear Information System (INIS)

Lai, Wang; Jia-Xing, Wang; Wei, Zhao; Xiang, Zou; Yi, Luo

2010-01-01

Blue In 0.2 Ga 0.8 N multiple quantum wells (MQWs) with In x Ga 1–x N (x = 0.01–0.04) barriers are grown by metal organic vapour phase epitaxy. The internal quantum efficiencies (IQEs) of these MQWs are studied in a way of temperature-dependent photoluminescence spectra. Furthermore, a 2-channel Arrhenius model is used to analyse the nonradiative recombination centres (NRCs). It is found that by adopting the InGaN barrier beneath the lowest well, it is possible to reduce the strain hence the NRCs in InGaN MQWs. By optimizing the thickness and the indium content of the InGaN barriers, the IQEs of InGaN/InGaN MQWs can be increased by about 2.5 times compared with conventional InGaN/GaN MQWs. On the other hand, the incorporation of indium atoms into the intermediate barriers between adjacent wells does not improve IQE obviously. In addition, the indium content of the intermediate barriers should match with that of the lowest barrier to avoid relaxation. (condensed matter: structure, thermal and mechanical properties)

Barriers to electric energy efficiency in Ghana

Science.gov (United States)

Berko, Joseph Kofi, Jr.

Development advocates argue that sustainable development strategies are the best means to permanently improve living standards in developing countries. Advocates' arguments are based on the technical, financial, and environmental advantages of sustainable development. However, they have not addressed the organizational and administrative decision-making issues which are key to successful implementation of sustainable development in developing countries. Using the Ghanaian electricity industry as a case study, this dissertation identifies and analyzes organizational structures, administrative mechanisms, and decision-maker viewpoints that critically affect the success of adoption and implementation of energy efficiency within a sustainable development framework. Utilizing semi-structured interviews in field research, decision-makers' perceptions of the pattern of the industry's development, causes of the electricity supply shortfall, and barriers to electricity-use efficiency were identified. Based on the initial findings, the study formulated a set of policy initiatives to establish support for energy use efficiency. In a second set of interviews, these policy suggestions were presented to some of the top decision-makers to elicit their reactions. According to the decision-makers, the electricity supply shortfall is due to rapid urbanization and increased industrial consumption as a result of the structural adjustment program, rural electrification, and the sudden release of suppressed loads. The study found a lack of initiative and collaboration among industry decision-makers, and a related divergence in decision-makers' concerns and viewpoints. Also, lacking are institutional support systems and knowledge of proven energy efficiency strategies and technologies. As a result, planning, and even the range of perceived solutions to choose from are supply-side oriented. The final chapter of the study presents implications of its findings and proposes that any

Barriers to fusion

International Nuclear Information System (INIS)

Berriman, A.C.; Butt, R.D.; Dasgupta, M.; Hinde, D.J.; Morton, C.R.; Newton, J.O.

1999-01-01

The fusion barrier is formed by the combination of the repulsive Coulomb and attractive nuclear forces. Recent research at the Australian National University has shown that when heavy nuclei collide, instead of a single fusion barrier, there is a set of fusion barriers. These arise due to intrinsic properties of the interacting nuclei such deformation, rotations and vibrations. Thus the range of barrier energies depends on the properties of both nuclei. The transfer of matter between nuclei, forming a neck, can also affect the fusion process. High precision data have been used to determine fusion barrier distributions for many nuclear reactions, leading to new insights into the fusion process

Barriers, drivers and decision-making process for industrial energy efficiency: A broad study among manufacturing small and medium-sized enterprises

International Nuclear Information System (INIS)

Trianni, Andrea; Cagno, Enrico; Farné, Stefano

2016-01-01

Highlights: • Barriers and drivers vary along the decision-making process of EEM adoption. • Economic barriers, awareness and behavioural are most critical. • Beside economic drivers, major relevance of regulatory and vocational training. • Importance of stakeholders providing technical support. • Barriers and drivers are different according to several firm characteristics. - Abstract: Energy efficiency has been recognized as a primary means to increase the competitiveness of the industrial sector, and in particular for small and medium-sized enterprises (SMEs), in which energy efficiency measures (EEMs) are scarcely implemented. For this reason, future policies should carefully address such issue. Hence, it is really crucial to have a precise and punctual knowledge of the barriers to be tackled in the decision-making process of adopting an EEM and the drivers to be promoted. This study discussed the findings from a broad investigation within 222 manufacturing SMEs located in a Northern Italy region. Beside economic issues particularly affecting SMEs, awareness and behavioural issues emerge as critical, affecting the very first steps of the decision-making process, related to the punctual identification and evaluation of plausible EEMs. The support from manufacturers, technology suppliers, installers and ESCOs supporting SMEs through vocational training drivers (e.g. technical support) is really important to tackle such issues. More generally, beside financial institutions, the supply chain of technologies is recognized as particularly useful for supporting enterprises in the adoption of EEMs. Additionally, having previously conducted energy audit and implemented EEMs are critical factors able to highlight non-economic barriers and drivers. Therefore, the promotion of EEMs will necessarily imply a further effort in pointing out the so-called non-energy benefits (NEBs) from the implementation of EEMs. Finally, our study reveals that smaller and non-energy

Alpha-production channels in 6Li+159Tb at energies around the Coulomb barrier

International Nuclear Information System (INIS)

Pradhan, M.K.; Mukherjee, A.; Roy, S.; Basu, P.; Goswami, A.; Saha Sarkar, M.; Kshetri, R.; Roy Chowdhury, R.; Ray, M.; Santra, S.; Kailas, S.; Parkar, V.V.; Palit, R.

2010-01-01

In order to investigate what are the dominant processes that might contribute to the inclusive α-particle channels, very recently measurements have been performed by the characteristic γ-ray method for the system 6 Li+ 159 Tb at energies below and above the Coulomb barrier (V B = 26.9 MeV)

Calculation of multidimensional potential energy surfaces for even-even transuranium nuclei: systematic investigation of the triaxiality effect on the fission barrier

Science.gov (United States)

Chai, Qing-Zhen; Zhao, Wei-Juan; Liu, Min-Liang; Wang, Hua-Lei

2018-05-01

Static fission barriers for 95 even-even transuranium nuclei with charge number Z = 94–118 have been systematically investigated by means of pairing self-consistent Woods-Saxon-Strutinsky calculations using the potential energy surface approach in multidimensional (β 2, γ, β 4) deformation space. Taking the heavier 252Cf nucleus (with the available fission barrier from experiment) as an example, the formation of the fission barrier and the influence of macroscopic, shell and pairing correction energies on it are analyzed. The results of the present calculated β 2 values and barrier heights are compared with previous calculations and available experiments. The role of triaxiality in the region of the first saddle is discussed. It is found that the second fission barrier is also considerably affected by the triaxial deformation degree of freedom in some nuclei (e.g., the Z=112–118 isotopes). Based on the potential energy curves, general trends of the evolution of the fission barrier heights and widths as a function of the nucleon numbers are investigated. In addition, the effects of Woods-Saxon potential parameter modifications (e.g., the strength of the spin-orbit coupling and the nuclear surface diffuseness) on the fission barrier are briefly discussed. Supported by National Natural Science Foundation of China (11675148, 11505157), the Project of Youth Backbone Teachers of Colleges and Universities of Henan Province (2017GGJS008), the Foundation and Advanced Technology Research Program of Henan Province (162300410222), the Outstanding Young Talent Research Fund of Zhengzhou University (1521317002) and the Physics Research and Development Program of Zhengzhou University (32410017)

Progressive multiple sclerosis: from pathogenic mechanisms to treatment.

Science.gov (United States)

Correale, Jorge; Gaitán, María I; Ysrraelit, María C; Fiol, Marcela P

2017-03-01

During the past decades, better understanding of relapsing-remitting multiple sclerosis disease mechanisms have led to the development of several disease-modifying therapies, reducing relapse rates and severity, through immune system modulation or suppression. In contrast, current therapeutic options for progressive multiple sclerosis remain comparatively disappointing and challenging. One possible explanation is a lack of understanding of pathogenic mechanisms driving progressive multiple sclerosis. Furthermore, diagnosis is usually retrospective, based on history of gradual neurological worsening with or without occasional relapses, minor remissions or plateaus. In addition, imaging methods as well as biomarkers are not well established. Magnetic resonance imaging studies in progressive multiple sclerosis show decreased blood-brain barrier permeability, probably reflecting compartmentalization of inflammation behind a relatively intact blood-brain barrier. Interestingly, a spectrum of inflammatory cell types infiltrates the leptomeninges during subpial cortical demyelination. Indeed, recent magnetic resonance imaging studies show leptomeningeal contrast enhancement in subjects with progressive multiple sclerosis, possibly representing an in vivo marker of inflammation associated to subpial demyelination. Treatments for progressive disease depend on underlying mechanisms causing central nervous system damage. Immunity sheltered behind an intact blood-brain barrier, energy failure, and membrane channel dysfunction may be key processes in progressive disease. Interfering with these mechanisms may provide neuroprotection and prevent disability progression, while potentially restoring activity and conduction along damaged axons by repairing myelin. Although most previous clinical trials in progressive multiple sclerosis have yielded disappointing results, important lessons have been learnt, improving the design of novel ones. This review discusses mechanisms involved

Future energy efficiency improvements within the US department of defense: Incentives and barriers

International Nuclear Information System (INIS)

Umstattd, Ryan J.

2009-01-01

The present work describes the military impact of improved efficiency and then highlights existing technological, political, and financial barriers for improving overall energy efficiency. As the largest user of energy within the US government, the Department of Defense (DOD) is rightly concerned that any disruption to the nation's energy supply may have an extremely adverse impact on its military capabilities. The total solution to providing energy security will be multi-faceted with progress required on many fronts. Increasing the use of renewable energy sources and improving energy storage capabilities are gradually creating a positive impact, but investing in improving the overall efficiency of the military effort provides both immediate and long-lasting payback. One might suppose that a decrease in the energy used by the DOD should lead to a decrease in military capability, but historical data proves otherwise. It is shown that the military has additional impetus, compared to civilian consumers, to pursue energy-efficiency improvements. Many tools are available to help the DOD along this path, yet there remain obstacles which must first be identified and analyzed as discussed herein.

Converse Barrier Certificate Theorem

DEFF Research Database (Denmark)

Wisniewski, Rafael; Sloth, Christoffer

2013-01-01

This paper presents a converse barrier certificate theorem for a generic dynamical system.We show that a barrier certificate exists for any safe dynamical system defined on a compact manifold. Other authors have developed a related result, by assuming that the dynamical system has no singular...... points in the considered subset of the state space. In this paper, we redefine the standard notion of safety to comply with generic dynamical systems with multiple singularities. Afterwards, we prove the converse barrier certificate theorem and illustrate the differences between ours and previous work...

Initiatives for the energy renovation of single-family houses inDenmark evaluated on the basis of barriers and motivators

DEFF Research Database (Denmark)

Grøn Bjørneboe, Matilde; Svendsen, Svend; Heller, Alfred

2018-01-01

The renovation of single-family houses in Denmark is progressing only slowly. Changes in current pol-icy are needed if the political goal of a fossil-free building sector as part of a fossil-free society is to beachieved. Known barriers and motivators for energy renovation are identified, and arr......The renovation of single-family houses in Denmark is progressing only slowly. Changes in current pol-icy are needed if the political goal of a fossil-free building sector as part of a fossil-free society is to beachieved. Known barriers and motivators for energy renovation are identified......, suggestions are madefor improvement in four areas: (1) focus on non-energy benefits rather than investment, (2) enhance-ment of subsidy system, (3) including relevant renovation plans in the energy performance certificate(EPC), and (4) long-term regulation on the maximum allowed energy consumption of houses....

Identifying Barriers and Pathways to Success for Renewable Energy Development on American Indian Lands

Energy Technology Data Exchange (ETDEWEB)

Necefer, Len Edward [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Univ. of Arizona, Tucson, AZ (United States); Jones, Thomas Elisha [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Carnegie Mellon Univ., Pittsburgh, PA (United States)

2016-11-01

American Indian tribes possess lands rich with renewable energy (RE) resources. Tribes have great potential and need to develop these resources, yet face a host of barriers that continue to impede development. Understanding these challenges as well as the pathways that can be taken to overcome them may facilitate more economic development to meet community needs and better position tribes to play a role in securing a low-carbon energy future for the United States. This paper presents the results of an expert elicitation of 24 tribal energy experts from federal, tribal, academic, and private industry backgrounds to identify barriers and opportunities for federally recognized tribes in the lower 48 states. Experts identified a number of unique challenges facing tribes including financing and funding, infrastructure, tribal leadership and staff, state-level influence, and partnerships. Cultural factors were seen only to be of concern with large-scale development. Tribal sovereignty is a significant motivation for RE development and has yet to be fully realized. Cultural considerations are critical to the success of future projects; smaller residential and community-scale projects may be a better fit. Improving partnerships between tribes and the private sector can increase RE deployment and overcome historical distrust. States can have a double-ended influence on projects within tribal lands through taxation.

Perceived benefits and barriers to exercise for recently treated patients with multiple myeloma: a qualitative study.

Science.gov (United States)

Craike, Melinda J; Hose, Kaye; Courneya, Kerry S; Harrison, Simon J; Livingston, Patricia M

2013-07-01

Understanding the physical activity experiences of patients with multiple myeloma (MM) is essential to inform the development of evidence-based interventions and to quantify the benefits of physical activity. The aim of this study was to gain an in-depth understanding of the physical activity experiences and perceived benefits and barriers to physical activity for patients with MM. This was a qualitative study that used a grounded theory approach. Semi-structured interviews were conducted in Victoria, Australia by telephone from December 2011-February 2012 with patients who had been treated for MM within the preceding 2-12 months. Interviews were transcribed and analysed using the constant comparison coding method to reduce the data to themes. Gender differences and differences between treatment groups were explored. Twenty-four interviews were completed. The sample comprised 13 females (54%), with a mean age of 62 years (SD = 8.8). Sixteen (67%) participants had received an autologous stem cell transplant (ASCT). All participants currently engaged in a range of light to moderate intensity physical activity; walking and gardening were the most common activities. Recovery from the symptoms of MM and side effects of therapy, psychological benefits, social factors and enjoyment were important benefits of physical activity. Barriers to physical activity predominately related to the symptoms of MM and side effects of therapy, including pain, fatigue, and fear of infection. Low self- motivation was also a barrier. Women participated in a more diverse range of physical activities than men and there were gender differences in preferred type of physical activity. Women were more likely to report psychological and social benefits; whereas men reported physical activity as a way to keep busy and self-motivation was a barrier. Patients treated with an ASCT more often reported affective benefits of participation in physical activity and fatigue as a barrier. Patients

Survey of the Relationship Between Activity Energy Expenditure Metabolic Equivalents and Barrier Factors of Physical Activity in the Elderly in Kashan

OpenAIRE

Sadrollahi, Ali; Khalili, Zahra; Pour Nazari, Robab; Mohammadi, Majid; Ahmadi Khatir, Maryam; Mossadegh, Najima

2016-01-01

Background Physical activity in the elderly is influenced by aspects of aging that cause personal, mental, environmental, and social changes. Increases in factors that are barriers to activity cause physical energy expenditure to decrease. Objectives The aim of the present study was to survey the relationship between energy expenditure in metabolic equivalent units (MET) and factors that are barriers to physical activity in elderly people in Kashan, Iran Methods This is a descriptive analysis...

Barriers to clean development mechanism renewable energy projects in Mexico

International Nuclear Information System (INIS)

Lokey, Elizabeth

2009-01-01

Mexico is not reaching its full potential to capture benefits from clean development mechanism (CDM) projects because of its limited market for independent power producers (IPPs) and the barriers imposed on these entities by the state-run electric utility that controls most of the country's generation and transmission. This state-run entity has pursued CDM revenues only in isolated cases where international financial assistance was given because it is bound by law to pursue the least-cost generation option for its customers. Recent changes in Mexican legislation that provide incentives for renewable energy development could open the marketplace for these types of projects. (author)

The energy highways. The three safety barriers at nuclear power plants. Where does coal fit into the energy mix?. Sustainable urban development in Hanover. Energy in sub-Saharan Africa

International Nuclear Information System (INIS)

Anon.

2005-01-01

This issue of Alternatives newsletter contains a main press-kit about the economics of interconnected power distribution systems and 4 articles dealing with reactors safety, the advantages and drawbacks of coal in the energy mix, the environmental policy of Hanover city, and the energy situation in sub-Saharan Africa: 1 - 'The energy highways': Spotlight on the electrical power grids. From the much needed modernization of existing installations to the extension of networks in developing countries, Alternatives takes a look at these infrastructures that shape our environment, which can be considered as veritable 'energy highways' ensuring the coverage of our planet. 2 - 'The three safety barriers at nuclear power plants': Review of the three protective barriers deployed in the nuclear industry to ensure reactor safety. 3 - 'Where does coal fit into the energy mix?': Two experts put into perspective the challenges related to the use of coal, its efficiency and its environmental impact, on the basis of the Chinese and Polish examples. 4 - 'Sustainable urban development in Hanover': Bringing together quality of living and energy savings, this is the challenge taken up by Hanover in the Kronsberg area. Alternatives has examined this original model, which could serve as an example for other European cities. 5 - 'Energy in sub-Saharan Africa': Relatively abundant resources but which are poorly utilized and distributed characterize the energy situation in sub-Saharan Africa. Analysis of the situation and explanation of this paradox

Prediction of point-defect migration energy barriers in alloys using artificial intelligence for atomistic kinetic Monte Carlo applications

Energy Technology Data Exchange (ETDEWEB)

Castin, N. [Structural Materials Group, Nuclear Materials Science Institute, Studiecentrum voor Kerneenergie Centre d' etude de l' energie nucleaire (SCK CEN), Boeretang 200, B-2400 Mol (Belgium); Universite Libre de Bruxelles (ULB), Physique des Solides Irradies et Nanostructures (PSIN), CP234 Boulevard du triomphe, Brussels (Belgium); Malerba, L. [Structural Materials Group, Nuclear Materials Science Institute, Studiecentrum voor Kerneenergie Centre d' etude de l' energie nucleaire (SCK CEN), Boeretang 200, B-2400 Mol (Belgium)], E-mail: lmalerba@sckcen.be

2009-09-15

We significantly improved a previously proposed method to take into account chemical and also relaxation effects on point-defect migration energy barriers, as predicted by an interatomic potential, in a rigid lattice atomistic kinetic Monte Carlo simulation. Examples of energy barriers are rigorously calculated, including chemical and relaxation effects, as functions of the local atomic configuration, using a nudged elastic bands technique. These examples are then used to train an artificial neural network that provides the barriers on-demand during the simulation for each configuration encountered by the migrating defect. Thanks to a newly developed training method, the configuration can include a large number of neighbour shells, thereby properly including also strain effects. Satisfactory results have been obtained when the configuration includes different chemical species only. The problems encountered in the extension of the method to configurations including any number of point-defects are stated and solutions to tackle them are sketched.

Energy partition in nuclear fission

International Nuclear Information System (INIS)

Ruben, A.; Maerten, H.; Seeliger, D.

1990-01-01

A scission point model (two spheroid model TSM) including semi-empirical temperature-dependent shell correction energies for deformed fragments at scission is presented. It has been used to describe the mass-asymmetry-dependent partition of the total energy release on both fragments from spontaneous and induced fission. Characteristic trends of experimental fragment energy and neutron multiplicity data as function of incidence energy in the Th-Cf region of fissioning nuclei are well reproduced. Based on model applications, information on the energy dissipated during the descent from second saddle of fission barrier to scission point have been deduced. (author). 39 refs, 13 figs

Enhancing the effective energy barrier of a Dy(III) SMM using a bridged diamagnetic Zn(II) ion.

Science.gov (United States)

Upadhyay, Apoorva; Singh, Saurabh Kumar; Das, Chinmoy; Mondol, Ranajit; Langley, Stuart K; Murray, Keith S; Rajaraman, Gopalan; Shanmugam, Maheswaran

2014-08-18

Field induced single-molecule-magnet behaviour is observed for both a heterodinuclear [ZnDy(L(-))2](3+) complex (1) and a mononuclear [Dy(HL)2](3+) complex (2), with effective energy barriers of 83 cm(-1) and 16 cm(-1), respectively. Insights into the relaxation mechanism(s) and barrier heights are provided via ab initio and DFT calculations. Our findings reveal an interesting observation that the U(eff) of SMMs can be enhanced by incorporating diamagnetic metal ions.

Tunneling of an energy eigenstate through a parabolic barrier viewed from Wigner phase space

DEFF Research Database (Denmark)

Heim, D.M.; Schleich, W.P.; Alsing, P.M.

2013-01-01

We analyze the tunneling of a particle through a repulsive potential resulting from an inverted harmonic oscillator in the quantum mechanical phase space described by the Wigner function. In particular, we solve the partial differential equations in phase space determining the Wigner function...... of an energy eigenstate of the inverted oscillator. The reflection or transmission coefficients R or T are then given by the total weight of all classical phase-space trajectories corresponding to energies below, or above the top of the barrier given by the Wigner function....

A barrier analysis for the development of distributed energy in China: A case study in Fujian province

International Nuclear Information System (INIS)

Liu, Jian; Wang, Run; Sun, Yanwei; Lin, Yanjie; Xiao, Lishan

2013-01-01

Distributed energy (DE) is receiving lots of attention from the Chinese government. A number of DE projects have been constructed in China. However, there are still numerous problems with DE projects. What hinders the development of DE in China? The Huadian Jimei distributed energy project (HJDE) is a typical DE building project that was not completed successfully. This paper focuses on this DE project to explore the barriers to DE development. The research group conducted 13 semi-structured interviews with representatives of institutions and corporations involved in the HJDE project to collect information. Based on the information, three types of problems were determined, and the results indicate that these conflicts between the core stakeholders make DE projects unsuccessful. These problems result from institutional barriers to DE, rooting in the development policy and the current energy market. Moreover, several key stakeholders are not able to play an active role in the design or management of DE projects. The Chinese government will put a much greater effort into the development of future DE projects. Many national support policies and rules will be announced, which are easy to practical use. Under these conditions, 1000 DE projects will be successfully completed until 2015. - Highlights: • Using stakeholder analysis, this paper focuses on one typical building DE project. • Conflicts between core stakeholders make the DE project cannot be completed. • The barriers are related to the role of electricity consumers in DE projects. • The barriers are also related to current Chinese natural gas and LNG market. • Drivers such as regulation, incentives and so on should be built and modified

NOVEL TSUNAMI BARRIERS AND THEIR APPLICATIONS FOR HYDROELECTRIC ENERGY STORAGE, FISH FARMING, AND FOR LAND RECLAMATION

Directory of Open Access Journals (Sweden)

Hans J. Scheel

2014-10-01

Full Text Available The tsunami hazard can be mitigated if the destructive waves generated from earthquakes and landslides can be reflected by a stable submerged vertical barrier before striking coastal communities or important structures. Building such deep walls by conventional submarine technology is difficult. The present study describes the principle and the erection of such submarine defensive walls by a relatively simple efficient and economic technology. This technology is based on lowering high- strength steel fences with horizontal anchors, or two parallel steel fences with distance holders, into the sea and fixing them with rocks deposited from top. Dredged material like gravel or sand can be used for additional filling. This Tsunami-Flooding Barrier (TFB extends a few meters above sea level and carries on top a concrete supply and service road protected on both sides against storm waves by concrete walls. Replaceable surge stoppers (parapets, wave return walls prevent overtopping and erosion of the seaward barrier face. The TFBs protect the coastline against tsunami and the highest storm waves from hurricanes, but also can provide protection from oil spills or other contaminations from the ocean and thus protect flora, fauna, coral reefs and beaches. Channels and gates allow navigation and can be closed quickly upon a tsunami or storm warning. The construction costs can be eventually compensated by using the reservoirs between coast and barriers for hydroelectric energy storage (using pump-turbines in the barriers or for fish-farming, or alternatively the reservoir can be filled with rocks, rubble, gravel, sand and covered with soil in order to reclaim new land. Tidal energy can be generated by installing turbines within these barriers. Also, this submarine architecture may be applied to protect pillars of bridges and offshore platforms, and for erecting “roads” into the sea to connect near-shore platforms and wind-parks with the coast and

Beyond Group: Multiple Person Tracking via Minimal Topology-Energy-Variation.

Science.gov (United States)

Gao, Shan; Ye, Qixiang; Xing, Junliang; Kuijper, Arjan; Han, Zhenjun; Jiao, Jianbin; Ji, Xiangyang

2017-12-01

Tracking multiple persons is a challenging task when persons move in groups and occlude each other. Existing group-based methods have extensively investigated how to make group division more accurately in a tracking-by-detection framework; however, few of them quantify the group dynamics from the perspective of targets' spatial topology or consider the group in a dynamic view. Inspired by the sociological properties of pedestrians, we propose a novel socio-topology model with a topology-energy function to factor the group dynamics of moving persons and groups. In this model, minimizing the topology-energy-variance in a two-level energy form is expected to produce smooth topology transitions, stable group tracking, and accurate target association. To search for the strong minimum in energy variation, we design the discrete group-tracklet jump moves embedded in the gradient descent method, which ensures that the moves reduce the energy variation of group and trajectory alternately in the varying topology dimension. Experimental results on both RGB and RGB-D data sets show the superiority of our proposed model for multiple person tracking in crowd scenes.

Hot exciton relaxation in multiple layers CdSe/ZnSe self-assembled quantum dots separated by thick ZnSe barriers

International Nuclear Information System (INIS)

Eremenko, M; Budkin, G; Reznitsky, A

2015-01-01

We have studied PL and PLE spectra of two samples (A and B) of MBE grown CdSe/ZnSe asymmetric double quantum wells with different amount of deposited CdSe layers separated by 14 nm ZnSe barrier. It has been found that PLE spectra of the states forming short wavelength side of the PL spectra of both deep and shallow QWs of the sample A as well as that of deep QW of the sample B demonstrate oscillating structure in the spectral ranges corresponding to exciton states of self-assembled quantum dots only. Meanwhile PLE spectra of the short wavelength states of shallow QW the sample B revealed pronounced oscillating structure with energy period of ZnSe LO phonon under excitation with photons in a wide energy range both in the regions of quantum-dot states and in that of free states in the ZnSe barrier. In these spectra creating of excitons with kinetic energies more than 0.3 eV was observed which considerably exceed the exciton binding energy as well as LO phonon energy (both appr. 0.03 eV). It has been concluded that oscillating structure of the PLE spectra arises due to cascade relaxation of hot excitons. We discuss the model which explains these experimental findings. (paper)

Hot exciton relaxation in multiple layers CdSe/ZnSe self-assembled quantum dots separated by thick ZnSe barriers

Science.gov (United States)

Eremenko, M.; Budkin, G.; Reznitsky, A.

2015-11-01

We have studied PL and PLE spectra of two samples (A and B) of MBE grown CdSe/ZnSe asymmetric double quantum wells with different amount of deposited CdSe layers separated by 14 nm ZnSe barrier. It has been found that PLE spectra of the states forming short wavelength side of the PL spectra of both deep and shallow QWs of the sample A as well as that of deep QW of the sample B demonstrate oscillating structure in the spectral ranges corresponding to exciton states of self-assembled quantum dots only. Meanwhile PLE spectra of the short wavelength states of shallow QW the sample B revealed pronounced oscillating structure with energy period of ZnSe LO phonon under excitation with photons in a wide energy range both in the regions of quantum-dot states and in that of free states in the ZnSe barrier. In these spectra creating of excitons with kinetic energies more than 0.3 eV was observed which considerably exceed the exciton binding energy as well as LO phonon energy (both appr. 0.03 eV). It has been concluded that oscillating structure of the PLE spectra arises due to cascade relaxation of hot excitons. We discuss the model which explains these experimental findings.

What we have learned so far on reactions and scattering with weakly bound nuclei at near barrier energies

International Nuclear Information System (INIS)

Gomes, P.R.S.

2011-01-01

Reactions involving weakly bound nuclei, especially halo nuclei, at near barrier energies, are an important subject not yet fully understood. Due to the low threshold energy for breakup, this process is particularly important and may affect significantly the fusion process and elastic scattering. In this talk I will show the systematic of results so far available in this field, concerning static and dynamical effects of halo and breakup on fusion and total reaction cross sections, the energy dependence of the optical potential on the elastic scattering and coupling effects on quasi-elastic scattering barrier distributions involving weakly bound nuclei, both stable and radioactive. The data to be discussed are new data from our group and from the literature, together with some older data. I will also present some experimental challenges for the development of this field. (author)

Multiplicities and minijets at Tevatron Collider energies

International Nuclear Information System (INIS)

Sarcevic, I.

1989-01-01

We show that in the parton branching model, the probability distribution does not obey KNO scaling. As energy increases, gluon contribution to multiplicities increases, resulting in the widening of the probability distribution, in agreement with experimental data. We predict that the widening of the distribution will stop at Tevatron Collider energies due to the dominant role of gluons at these energies. We also find that the gluon contribution to the 'minijet' cross section increases with energy and becomes dominant at the Tevatron Collider. We calculate QCD minijet cross sections for a variety of structure functions, QCD scales and p T min . We compare our theoretical results with the experimental data and find that some of the structure functions and choices of scale are preferred by the experimental data. We give theoretical predictions for the minijet cross section at the Tevatron Collider, indicating the possibility of distinguishing between different sets of structure functions and choices of scale. (orig.)

Mind the gap! Barriers and implementation deficiencies of energy policies at the local scale in urban China

International Nuclear Information System (INIS)

Wu, Jing; Zuidema, Christian; Gugerell, Katharina; Roo, Gert de

2017-01-01

Environmental concerns and potential social-economic impacts associated with fossil fuels have turned cities into indispensable entities for supporting energy transitions in China. Pursuing a transition towards a sustainable energy system has become a major policy concern for the Chinese central government. In response, and on the basis of a top-down and conformance-oriented system of policy implementation and evaluation, the Chinese central government has launched various policies and targets on energy efficiency and production that lower levels of government have to follow. However, the translation of top-down targets and the measurement of conformance-based targets have both proved to be problematic. This paper investigates Chinese state policy on energy efficiency through four empirical case studies. It identifies how policy design of target setting and evaluation is both impacting and driving the implementation of energy efficiency at the local urban scale. We demonstrate how local authorities are faced with constraining barriers that can inhibit the implementation of centrally issued targets and policies. These barriers may even undermine local performance in the pursuit of ambitious energy efficiency goals, resulting in potentially harmful consequences. - Highlights: • Energy efficiency policies are ill-adapted to the diversity of local circumstances. • Predominant focus on conformance in energy policies overlooks local performance. • Pursuing ambitions runs the risk of being undermined by strict measuring systems. • Chinese energy transition needs more flexibility in target setting and evaluation.

Barriers for Energy Renovation of Danish Single-Family Houses and Suggested Solutions to Overcome These

DEFF Research Database (Denmark)

Mortensen, Andrea; Heiselberg, Per; Knudstrup, Mary-Ann

2011-01-01

As much as 40% of the total energy consumption in Denmark is utilized by the building sector and most of this energy is used for heating. Political initiatives have been taken to reduce this amount considerably but for this to happen, the energy consumption of the existing residential housing stock...... must be reduced dramatically. The greatest saving potential is found among the approximately 440.000 standardised single-family houses which were constructed in the 1960’s and 1970’s. It is found that barriers preventing the implementation of this great potential are present in various forms among all...

Fusion of light ion systems at energies near and below the Coulomb barrier

International Nuclear Information System (INIS)

Arnould, M.; Howard, W.M.; Cusson, R.Y.

1978-01-01

Experimental fusion cross sections for light ion systems at energies below the Coulomb barrier become available in greater and greater number, and provide a stringent test of the macroscopic and microscopic physics involved in models of heavy-ion reactions. Measurements and predictions of the fusion cross sections for 12 C + 12 C, 12 C + 16 O and 16 O + 16 O are also of major importance in astrophysics. (orig.) [de

Non-monotonic probability of thermal reversal in thin-film biaxial nanomagnets with small energy barriers

Directory of Open Access Journals (Sweden)

N. Kani

2017-05-01

Full Text Available The goal of this paper is to investigate the short time-scale, thermally-induced probability of magnetization reversal for an biaxial nanomagnet that is characterized with a biaxial magnetic anisotropy. For the first time, we clearly show that for a given energy barrier of the nanomagnet, the magnetization reversal probability of an biaxial nanomagnet exhibits a non-monotonic dependence on its saturation magnetization. Specifically, there are two reasons for this non-monotonic behavior in rectangular thin-film nanomagnets that have a large perpendicular magnetic anisotropy. First, a large perpendicular anisotropy lowers the precessional period of the magnetization making it more likely to precess across the x^=0 plane if the magnetization energy exceeds the energy barrier. Second, the thermal-field torque at a particular energy increases as the magnitude of the perpendicular anisotropy increases during the magnetization precession. This non-monotonic behavior is most noticeable when analyzing the magnetization reversals on time-scales up to several tens of ns. In light of the several proposals of spintronic devices that require data retention on time-scales up to 10’s of ns, understanding the probability of magnetization reversal on the short time-scales is important. As such, the results presented in this paper will be helpful in quantifying the reliability and noise sensitivity of spintronic devices in which thermal noise is inevitably present.

Sub-barrier capture with quantum diffusion approach

Directory of Open Access Journals (Sweden)

Scheid W.

2011-10-01

Full Text Available With the quantum diffusion approach the behavior of capture cross sections and mean-square angular momenta of captured systems are revealed in the reactions with deformed and spherical nuclei at sub-barrier energies. With decreasing bombarding energy under the barrier the external turning point of the nucleus-nucleus potential leaves the region of short-range nuclear interaction and action of friction. Because of this change of the regime of interaction, an unexpected enhancement of the capture cross section is found at bombarding energies far below the Coulomb barrier. This effect is shown its worth in the dependence of mean-square angular momentum on the bombarding energy. From the comparison of calculated capture cross sections and experimental capture or fusion cross sections the importance of quasifission near the entrance channel is demonstrated for the actinidebased reactions and reactions with medium-heavy nuclei at extreme sub-barrier energies.

Multiple criteria decision making for sustainable energy and transportation systems. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ehrgott, Matthias [Auckland Univ. (New Zealand). Dept. of Engineering Science; Naujoks, Boris [Login GmbH, Schwelm (Germany).; Stewart, Theodor J. [Cape Town Univ., Rondebosch (South Africa). Dept. of Statistical Sciences; Wallenius, Jyrki (eds.) [Helsinki School of Economics (Finland). Dept. of Business Technology

2010-07-01

In the twenty-first century the sustainability of energy and transportation systems is on the top of the political agenda in many countries around the world and governments are establishing policies towards a sustainable, low emissions energy future. Environmental impacts of human economic activity necessitate the consideration of conflicting goals in decision making processes to develop sustainable systems. Any sustainable development has to reconcile conflicting economic and environmental objectives and criteria. The science of multiple criteria decision making has a lot to offer in addressing this need. Decision making with multiple (conflicting) criteria is the topic of research that is at the heart of the International Society of Multiple Criteria Decision Making. This book is based on selected papers presented at the societies 19th International Conference, held at The University of Auckland, New Zealand, from 7th to 12th January 2008 under the theme ''MCDM for Sustainable Energy and Transportation Systems''. (orig.)

Barriers and facilitators associated with colonoscopy completion in individuals with multiple chronic conditions: a qualitative study

Directory of Open Access Journals (Sweden)

Sultan S

2017-05-01

Full Text Available Shahnaz Sultan,1–4 Melissa R Partin,1,2 Phalgoon Shah,5 Jennifer LeLaurin,4 Ivette Magaly Freytes,4 Chandylen L Nightingale,6 Susan F Fesperman,4 Barbara A Curbow,7 Rebecca J Beyth3,4,8 1Center for Chronic Disease Outcomes Research, Minneapolis Veterans Affairs Health Care System, 2Department of Medicine, University of Minnesota, Minneapolis, MN, 3Department of Medicine, University of Florida College of Medicine, Gainesville, FL, 4Center of Innovation on Disability and Rehabilitation Research, North Florida/South Georgia Veterans Health System, Gainesville, FL, 5Department of Medicine, Tripler Army Medical Center, Honolulu, HI, 6Department of Social Sciences and Health Policy, Wake Forest School of Medicine, Winston-Salem NC, 7Department of Community and Behavioral Health, University of Maryland, College Park, MD, 8Geriatric Research, Education and Clinical Center, North Florida/South Georgia Veterans Health System, Gainesville, FL, USA Background: A recommendation to undergo a colonoscopy, an invasive procedure that requires commitment and motivation, planning (scheduling and finding a driver and preparation (diet restriction and laxative consumption, may be uniquely challenging for individuals with multiple chronic conditions (MCCs. This qualitative study aimed to describe the barriers and facilitators to colonoscopy experienced by such patients.Materials and methods: Semistructured focus groups were conducted with male Veterans who were scheduled for outpatient colonoscopy and either failed to complete the procedure or completed the examination. Focus group recordings were transcribed and analyzed by an inductive grounded approach using constant comparative analysis.Results: Forty-four individuals aged 51–83 years participated in this study (23 adherent and 21 nonadherent. Participants had an average of 7.4 chronic conditions (range 2–14. The five most common chronic conditions were hypertension (75%, hyperlipidemia (75

High energy lithium-oxygen batteries - Transport barriers and thermodynamics

KAUST Repository

Das, Shyamal K.

2012-01-01

We show that it is possible to achieve higher energy density lithium-oxygen batteries by simultaneously lowering the discharge overpotential and increasing the discharge capacity via thermodynamic variables alone. By assessing the relative effects of temperature and pressure on the cell discharge profiles, we characterize and diagnose the critical roles played by multiple dynamic processes that have hindered implementation of the lithium-oxygen battery. © 2012 The Royal Society of Chemistry.

Study of the dynamical potential barriers in heavy ion collisions

International Nuclear Information System (INIS)

Zhu, Long; Su, Jun; Xie, Wen-Jie; Zhang, Feng-Shou

2013-01-01

The nucleus–nucleus interaction potentials for the fusion reactions 16 O + 208 Pb, 64 Ni + 64 Ni, 58 Ni + 58 Ni and 16 O + 154 Sm are extracted from the improved isospin-dependent quantum molecular dynamics model. The shell correction effects are discussed. The negative shell correction energies lower potential barriers of a certain reaction. The incident energy dependence of the potential barrier is investigated for each system. A complex phenomenon of energy dependence is observed. It is also found that incident energy dependence of the barrier radius and barrier height shows opposite behaviors. The Coulomb potential shows weak energy dependence when distance of two colliding nuclei is lower than the touching distance. The isospin effects of the potential barrier are investigated. The orientation effects of the potential barrier is also discussed for the system 16 O + 154 Sm. The fusion cross sections that correspond to the equatorial orientation of 154 Sm are very low in sub-barrier region because of the high fusion barriers and the shallow potential pockets

Measurement of leakage and design for the protective barrier of the high energy radiation therapy room

International Nuclear Information System (INIS)

Chu, S.S.; Park, C.Y.

1981-01-01

The logical development of an optimum structural shielding design and the computation of protective barriers for high energy radiation therapy room, Toshiba 13 MeV are presented. We obtained following results by comparison in between the precalculating values and actual survey after complete installation of radiogenerating units. 1) The calculating formula for the protective barrier written in NCRP report no. 34(1970) was the most ideal and economic calculating methods for the construction of barrier and to determine thickness for the meeting requirements of the number of patients of 80-100 in daily treatment. 2) The precalculating values of protective barrier are 5 times more protective than that of actual measurement. It is depending on radiation workload and utilization the data most securely. 3) The dose rate during exposure are 2-10 mR/hr at out of the door and the control room. 4) The foul smelling and ozone gas production from long exposure of cancer patients cannot be estimated when the room is ill ventilated. (author)

Commercial tandem mirror reactor design with thermal barriers: WITAMIR-I

International Nuclear Information System (INIS)

Kulcinski, G.L.; Emmert, G.A.; Maynard, C.W.

1980-10-01

A conceptual design of a near term commercial tandem mirror power reactor is presented. The basic configuration utilizes yin-yang minimum-B plugs with inboard thermal barriers. The maximum magnetic fields are 6.1 T, 8.1 T, and 15 T in the central cell, yin-yang, and thermal barrier magnets, respectively. The blanket utilizes Pb 83 Li 17 as the coolant and HT-9 as the structural material. This yields a high energy multiplication (1.37), a sufficient tritium breeding ratio (1.07) and has a major advantage with respect to maintenance. The plasma Q is 28 at a fusion power level of 3000 MW(t); the net electrical output is 1530 MW(e); and the overall efficiency is 39%. Cost estimates indicate that WITAMIR-I is competitive with recent tokamak power reactor designs

Factors Influencing Energy Quantisation | Adelabu | Global Journal ...

African Journals Online (AJOL)

Department of Physics, College of Science & Agriculture, University of Abuja, P. M. B. 117, Abuja FCT, Nigeria. Investigations of energy quantisation in a range of multiple quantum well (MQW) systems using effective mass band structure calculations including non-parabolicity in both the well and barrier layers are reported.

Micro-fabricated Liquid Encapsulated Energy Harvester with Polymer Barrier Layer as Liquid Electret Interface

International Nuclear Information System (INIS)

Bu, L; Xu, H Y; Xu, B J; Song, L

2014-01-01

This paper addresses the electret discharge issue for liquid based electret energy harvesters. An interface structure of PDMS/PTFE polymer barrier layer between liquid and electrets is introduced, achieving 75% charge retain rate over 100h, compared with 0% without the proposed layer over 100h. Further, the PDMS/PTFE layer is introduced into liquid encapsulated energy harvester (LEEH) and is compatible with micro-fabrication process. The retain rate of device voltage is about 47%∼65% over 100h. At 100h after corona charging, the device generates maximally 3.7V, 0.55μW @1Hz rotation

Muon energy estimate through multiple scattering with the MACRO detector

Energy Technology Data Exchange (ETDEWEB)

Ambrosio, M.; Antolini, R.; Auriemma, G.; Bakari, D.; Baldini, A.; Barbarino, G.C.; Barish, B.C.; Battistoni, G.; Becherini, Y.; Bellotti, R.; Bemporad, C.; Bernardini, P.; Bilokon, H.; Bloise, C.; Bower, C.; Brigida, M.; Bussino, S.; Cafagna, F.; Calicchio, M.; Campana, D.; Candela, A.; Carboni, M.; Caruso, R.; Cassese, F.; Cecchini, S.; Cei, F.; Chiarella, V.; Choudhary, B.C.; Coutu, S.; Cozzi, M.; De Cataldo, G.; De Deo, M.; Dekhissi, H.; De Marzo, C.; De Mitri, I.; Derkaoui, J.; De Vincenzi, M.; Di Credico, A.; Dincecco, M.; Erriquez, O.; Favuzzi, C.; Forti, C.; Fusco, P.; Giacomelli, G.; Giannini, G.; Giglietto, N.; Giorgini, M.; Grassi, M.; Gray, L.; Grillo, A.; Guarino, F.; Gustavino, C.; Habig, A.; Hanson, K.; Heinz, R.; Iarocci, E.; Katsavounidis, E.; Katsavounidis, I.; Kearns, E.; Kim, H.; Kyriazopoulou, S.; Lamanna, E.; Lane, C.; Levin, D.S.; Lindozzi, M.; Lipari, P.; Longley, N.P.; Longo, M.J.; Loparco, F.; Maaroufi, F.; Mancarella, G.; Mandrioli, G.; Margiotta, A.; Marini, A.; Martello, D.; Marzari-Chiesa, A.; Mazziotta, M.N.; Michael, D.G.; Monacelli, P.; Montaruli, T.; Monteno, M.; Mufson, S.; Musser, J.; Nicolo, D.; Nolty, R.; Orth, C.; Osteria, G.; Palamara, O.; Patera, V.; Patrizii, L.; Pazzi, R.; Peck, C.W.; Perrone, L.; Petrera, S.; Pistilli, P.; Popa, V.; Raino, A.; Reynoldson, J.; Ronga, F.; Rrhioua, A.; Satriano, C.; Scapparone, E. E-mail: eugenio.scapparone@bo.infn.it; Scholberg, K.; Sciubba, A.; Serra, P.; Sioli, M. E-mail: maximiliano.sioli@bo.infn.it; Sirri, G.; Sitta, M.; Spinelli, P.; Spinetti, M.; Spurio, M.; Steinberg, R.; Stone, J.L.; Sulak, L.R.; Surdo, A.; Tarle, G.; Tatananni, E.; Togo, V.; Vakili, M.; Walter, C.W.; Webb, R

2002-10-21

Muon energy measurement represents an important issue for any experiment addressing neutrino-induced up-going muon studies. Since the neutrino oscillation probability depends on the neutrino energy, a measurement of the muon energy adds an important piece of information concerning the neutrino system. We show in this paper how the MACRO limited streamer tube system can be operated in drift mode by using the TDCs included in the QTPs, an electronics designed for magnetic monopole search. An improvement of the space resolution is obtained, through an analysis of the multiple scattering of muon tracks as they pass through our detector. This information can be used further to obtain an estimate of the energy of muons crossing the detector. Here we present the results of two dedicated tests, performed at CERN PS-T9 and SPS-X7 beam lines, to provide a full check of the electronics and to exploit the feasibility of such a multiple scattering analysis. We show that by using a neural network approach, we are able to reconstruct the muon energy for E{sub {mu}}<40 GeV. The test beam data provide an absolute energy calibration, which allows us to apply this method to MACRO data.

Barriers for the introduction of bioenergy in the Netherlands

International Nuclear Information System (INIS)

Gerlagh, T.; Groenendaal, B.; Van Ree, R.; Dinkelbach, L.; Van Doorn, J.; Hemmes, K.

2000-01-01

The use of biomass for energy in the Netherlands is still limited despite the political incentives to make bio-energy a major source of renewable energy. The hesitation of many stake-holders is due to the limited insight into the potential of biomass in the Netherlands and the presence of numerous other barriers. Availability of biomass, emission regulation and waste treatment regulations are considered important barriers. Analyses of their current state show that these barriers are broadly recognised and possibilities to decrease their impact are present. Some barriers with a minor influence so far will be of increasing importance and could be a threat to the development of bio-energy in future. These are the fast liberalising of the energy market and sustainable energy market, the competition with other renewables and the unclear status of the current technology available. Future research should focus on the possibilities to overcome these new barriers. 5 refs

How to perform Energy Trace & BarrierAnalysis (ETBA in industries? Acase study in Isomax Unit of Tehran refinery

Directory of Open Access Journals (Sweden)

J Adl

2006-04-01

Full Text Available Background and Aims: People, equipments and properties are continuously exposed tonumerous hazards while technology develops. The global increasing rate of accidents and workrelatedinjuries, especially in Iran, is an evidence for these hazards. There are numerous methodsfor hazard analysis such as the Energy Trace & Barrier Analysis (ETBA, which is a process ofanalysis based on system safety for detecting and definition of hazards and also risks that maycause system damage.Method: This is a case study in the Isomax unit of Tehran refinery and allied section. Datecollection and completion of the ETBAsheets were conducted through observation and interviewmethod with experts, walking - talking through method, investigation of technical and operativedocuments.Results: Twelve different kinds of energy and 28 subgroups were investigated. The types ofenergies, existence barriers, vulnerable targets, risk assessment code, and adequacy of barriers aswell as recommendations for decreasing risk level through tolerable risk were identified.Conclusion: The results of this study show potential application of ETBA in different industries,especially chemical industry, which is a method for identification hazards and prevention ofwork-related injuries.

Innovation and adoption of energy efficient technologies: An exploratory analysis of Italian primary metal manufacturing SMEs

International Nuclear Information System (INIS)

Trianni, Andrea; Cagno, Enrico; Worrell, Ernst

2013-01-01

Additional efforts will be needed by European countries to improve the energy efficiency, as with current trends the 20% objective will be missed. Small and medium-sized enterprises (SMEs) manufacturing sector is a promising field, as SMEs are less energy-efficient than larger enterprises. Several studies investigated the barriers to the diffusion of technologies and practices for industrial energy efficiency, but little attention has been paid to understand the factors affecting the perception of such barriers by SMEs. In this multiple case-study, we have investigated 20 Primary Metal manufacturing SMEs in Northern Italy. Economic and information barriers are perceived as the major issues. Interestingly, firm's size, innovativeness of the market in which enterprises operate, as well as product and process innovation are factors affecting barriers to energy efficiency. Differences have been observed within SMEs, especially for information and competence-related barriers. In particular, a more innovative external context in which enterprises operate and a greater production process complexity seem to reduce barriers. Moreover, more product innovative enterprises seem to have a lower perception of behavioral and technology-related barriers. The results of this exploratory investigation provide useful suggestions for policy design and further research on industrial energy efficiency. - highlights: • Economic and Information emerge as the most relevant barriers to energy efficiency. • Market, product and process innovation seem relevant factors affecting barriers. • Firm's size is a factor affecting barriers' perception

Condensation on superhydrophobic surfaces: the role of local energy barriers and structure length scale.

Science.gov (United States)

Enright, Ryan; Miljkovic, Nenad; Al-Obeidi, Ahmed; Thompson, Carl V; Wang, Evelyn N

2012-10-09

Water condensation on surfaces is a ubiquitous phase-change process that plays a crucial role in nature and across a range of industrial applications, including energy production, desalination, and environmental control. Nanotechnology has created opportunities to manipulate this process through the precise control of surface structure and chemistry, thus enabling the biomimicry of natural surfaces, such as the leaves of certain plant species, to realize superhydrophobic condensation. However, this "bottom-up" wetting process is inadequately described using typical global thermodynamic analyses and remains poorly understood. In this work, we elucidate, through imaging experiments on surfaces with structure length scales ranging from 100 nm to 10 μm and wetting physics, how local energy barriers are essential to understand non-equilibrium condensed droplet morphologies and demonstrate that overcoming these barriers via nucleation-mediated droplet-droplet interactions leads to the emergence of wetting states not predicted by scale-invariant global thermodynamic analysis. This mechanistic understanding offers insight into the role of surface-structure length scale, provides a quantitative basis for designing surfaces optimized for condensation in engineered systems, and promises insight into ice formation on surfaces that initiates with the condensation of subcooled water.

On the Multiplicity Distributions at LHC Energies

International Nuclear Information System (INIS)

Fialkowski, K.; Wit, R.

2011-01-01

The ALICE and CMS data on the multiplicity distributions are compared with the lower energy data and with the results from the 8.142 version of the PYTHIA MC event generator with two tunings. The ALICE data for moments are used to calculate the factorial cumulants. It is suggested that the data on moments or cumulants are well suited to specify the optimal tuning of the model parameters. (authors)

Pre-scission 4He multiplicity in the 19F+197Au reaction

International Nuclear Information System (INIS)

Ikezoe, H.; Shikazono, N.; Nagame, Y.; Sugiyama, Y.; Tomita, Y.; Ideno, K.; Iwamoto, A.; Ohtsuki, T.

1990-01-01

Pre- and post-scission 4 He particle multiplicities for the 19 F+ 197 Au reaction in the excitation energy range of 43 to 90 MeV have been measured in coincidence with fission fragments. The coincident 4 He particles measured at backward angles are accounted for by evaporation from a compound nucleus and fission fragments. The most probable center-of-mass energy of the 4 He particles measured at backward angles is shifted towards lower energies by ∼2 MeV compared to a statistical model calculation performed by assuming 4 He emission from a spherical compound nucleus. The observed pre-scission 4 He multiplicity as a function of excitation energy is compared to a set of statistical-model calculations which also included the delayed onset of fission. The comparison shows that the observed energy dependence of the pre-scission 4 He multiplicity is reproduced by the calculation without taking into account the delayed onset of fission if the reduced emission barrier for 4 He is assumed in the calculation. The emission mechanism of the pre-scission 4 He is discussed

Some peculiarities of interactions of weakly bound lithium nuclei at near-barrier energies

Science.gov (United States)

Kabyshev, A. M.; Kuterbekov, K. A.; Sobolev, Yu G.; Penionzhkevich, Yu E.; Kubenova, M. M.; Azhibekov, A. K.; Mukhambetzhan, A. M.; Lukyanov, S. M.; Maslov, V. A.; Kabdrakhimova, G. D.

2018-02-01

This paper presents new experimental data on the total cross sections of 9Li + 28Si reactions at low energies as well as the analysis of previously obtained data for 6,7Li. Based on a large collection of data (authors’ and literature data) we carried out a comparative analysis of the two main experimental interaction cross sections (angular distributions of the differential cross sections and total reaction cross sections) for weakly bound lithium (6-9Li, 11Li) nuclei in the framework of Kox parameterization and the macroscopic optical model. We identified specific features of these interactions and predicted the experimental trend in the total reaction cross sections for Li isotopes at energies close to the Coulomb barrier.

Muon energy estimate through multiple scattering with the MACRO detector

CERN Document Server

Ambrosio, M; Auriemma, G; Bakari, D; Baldini, A; Barbarino, G C; Barish, B C; Battistoni, G; Becherini, Y; Bellotti, R; Bemporad, C; Bernardini, P; Bilokon, H; Bloise, C; Bower, C; Brigida, M; Bussino, S; Cafagna, F; Calicchio, M; Campana, D; Candela, A; Carboni, M; Caruso, R; Cassese, F; Cecchini, S; Cei, F; Chiarella, V; Choudhary, B C; Coutu, S; Cozzi, M; De Cataldo, G; De Deo, M; Dekhissi, H; De Marzo, C; De Mitri, I; Derkaoui, J; De Vincenzi, M; Di Credico, A; Dincecco, M; Erriquez, O; Favuzzi, C; Forti, C; Fusco, P; Giacomelli, G; Giannini, G; Giglietto, N; Giorgini, M; Grassi, M; Gray, L; Grillo, A; Guarino, F; Gustavino, C; Habig, A; Hanson, K; Heinz, R; Iarocci, E; Katsavounidis, E; Katsavounidis, I; Kearns, E; Kim, H; Kyriazopoulou, S; Lamanna, E; Lane, C; Levin, D S; Lindozzi, M; Lipari, P; Longley, N P; Longo, M J; Loparco, F; Maaroufi, F; Mancarella, G; Mandrioli, G; Margiotta, A; Marini, A; Martello, D; Marzari-Chiesa, A; Mazziotta, M N; Michael, D G; Monacelli, P; Montaruli, T; Monteno, M; Mufson, S; Musser, J; Nicolò, D; Nolty, R; Orth, C; Osteria, G; Palamara, O; Patera, V; Patrizii, L; Pazzi, R; Peck, C W; Perrone, L; Petrera, S; Pistilli, P; Popa, V; Rainó, A; Reynoldson, J; Ronga, F; Rrhioua, A; Satriano, C; Scapparone, E; Scholberg, K; Sciubba, A; Serra, P; Sioli, M; Sirri, G; Sitta, M; Spinelli, P; Spinetti, M; Spurio, M; Steinberg, R; Stone, J L; Sulak, L R; Surdo, A; Tarle, G; Tatananni, E; Togo, V; Vakili, M; Walter, C W; Webb, R

2002-01-01

Muon energy measurement represents an important issue for any experiment addressing neutrino-induced up-going muon studies. Since the neutrino oscillation probability depends on the neutrino energy, a measurement of the muon energy adds an important piece of information concerning the neutrino system. We show in this paper how the MACRO limited streamer tube system can be operated in drift mode by using the TDCs included in the QTPs, an electronics designed for magnetic monopole search. An improvement of the space resolution is obtained, through an analysis of the multiple scattering of muon tracks as they pass through our detector. This information can be used further to obtain an estimate of the energy of muons crossing the detector. Here we present the results of two dedicated tests, performed at CERN PS-T9 and SPS-X7 beam lines, to provide a full check of the electronics and to exploit the feasibility of such a multiple scattering analysis. We show that by using a neural network approach, we are able to r...

Hindrance of O16+Pb208 fusion at extreme sub-barrier energies

Science.gov (United States)

Esbensen, Henning; Mişicu, Şerban

2007-11-01

We analyze the fusion data for O16+Pb208 using coupled-channels calculations. We include couplings to the low-lying surface excitations of the projectile and target and study the effect of the (O16,O17) one-neutron pickup. The hindrance of the fusion data that is observed at energies far below the Coulomb barrier cannot be explained by a conventional ion-ion potential and defining the fusion in terms of ingoing-wave boundary conditions (IWBC). We show that the hindrance can be explained fairly well by applying the M3Y double-folding potential which has been corrected with a calibrated, repulsive term that simulates the effect of nuclear incompressibility. We show that the coupling to one-neutron transfer channels plays a crucial role in improving the fit to the data. The best fit is achieved by increasing the transfer strength by 25% relative to the strength that is required to reproduce the one-neutron transfer data. The larger strength is not unrealistic because the calculated inelastic plus transfer cross section is in good agreement with the measured quasielastic cross section. We finally discuss the problem of reproducing the fusion data at energies far above the Coulomb barrier. Here we do not account for the data when we apply the IWBC but the discrepancy is essentially eliminated by applying the M3Y+repulsion potential and a weak, short-ranged imaginary potential.

Engineered barrier development for a nuclear waste repository in basalt

International Nuclear Information System (INIS)

Smith, M.J.

1980-05-01

The BWIP Engineered Barrier Program has been developed to provide an integrated approach to the development of site-specific Engineered Barrier assemblages for a repository located in basalt. The goal of this program is to specify engineered and natural barriers which will ensure that nuclear and non-radioactive hazardous materials emplaced in a repository in basalt do not exceed acceptable rates of release to the biosphere. A wide range of analytical and experimental activities related to the basalt repository environment, waste package environment, waste/barrier/rock interactions, and barrier performance assessment provide the basis for selection of systems capable of meeting licensing requirements. Work has concentrated on specifying and testing natural and man-made materials which can be used to plug boreholes in basalt and which can be used as multiple barriers to surround nuclear waste forms and containers. The Engineered Barriers Program is divided into two major activities: multiple barrier studies and borehole plugging. 8 figures, 4 tables

Charged multiplicity distributions and correlations in e+e- annihilation at PETRA energies

International Nuclear Information System (INIS)

Braunschweig, W.; Gerhards, R.; Kirschfink, F.J.; Martyn, H.U.; Kolanoski, H.; Bowler, M.G.; Burrows, P.N.; Veitch, M.E.; Brandt, S.; Holder, M.; Caldwell, A.; Muller, D.; Ritz, S.; Strom, D.; Takashima, M.; Wu Saulan; Zobernig, G.

1989-01-01

We report on an analysis of the multiplicity distributions of charged particles produced in e + e - annihilation into hadrons at c.m. energies between 14 and 46.8 GeV. The charged multiplicity distributions of the whole event and single hemisphere deviate significantly from the Poisson distribution but follow approximate KNO scaling. We have also studied the multiplicity distributions in various rapidity intervals and found that they can be well described by the negative binomial distribution only for small central intervals. We have also analysed forward-backward multiplicity correlations for different energies and selections of particle charge and shown that they can be understood in terms of the fragmentation properties of the different quark flavours and by the production and decay of resonances. These correlations are well reproduced by the Lund string model. (orig.)

Integrated community energy solutions : a roadmap for action

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

Integrated community energy solutions (ICES) can significantly improve community energy performance and help to achieve Canada's energy efficiency and climate change objectives. The solutions integrate physical components from multiple sectors, including transportation; housing and buildings; industry; water; waste management; and other local community services. However, ICES require the support of communities, governments and investors who can help to reduce barriers to action and define a marketplace. This road map provided details of provincial, territorial, and federal government inputs to ensuring the adoption of ICES. The roles of municipalities, developers, energy utilities and other stakeholders were also discussed. Key roles, sectoral building blocks, and barriers affecting ICES implementation were discussed. A 3-phase transition approach was presented in which the overarching strategies of ICES implementation were described. A menu of ICES tools was also included. 17 figs.

Smart Energy Management of Multiple Full Cell Powered Applications

Energy Technology Data Exchange (ETDEWEB)

Mohammad S. Alam

2007-04-23

In this research project the University of South Alabama research team has been investigating smart energy management and control of multiple fuel cell power sources when subjected to varying demands of electrical and thermal loads together with demands of hydrogen production. This research has focused on finding the optimal schedule of the multiple fuel cell power plants in terms of electric, thermal and hydrogen energy. The optimal schedule is expected to yield the lowest operating cost. Our team is also investigating the possibility of generating hydrogen using photoelectrochemical (PEC) solar cells through finding materials for efficient light harvesting photoanodes. The goal is to develop an efficient and cost effective PEC solar cell system for direct electrolysis of water. In addition, models for hydrogen production, purification, and storage will be developed. The results obtained and the data collected will be then used to develop a smart energy management algorithm whose function is to maximize energy conservation within a managed set of appliances, thereby lowering O/M costs of the Fuel Cell power plant (FCPP), and allowing more hydrogen generation opportunities. The Smart Energy Management and Control (SEMaC) software, developed earlier, controls electrical loads in an individual home to achieve load management objectives such that the total power consumption of a typical residential home remains below the available power generated from a fuel cell. In this project, the research team will leverage the SEMaC algorithm developed earlier to create a neighborhood level control system.

Renewable energy clusters recurring barriers to cluster development in eleven countries

CERN Document Server

Jaegersberg, Gudrun

2017-01-01

Taking eleven countries in Europe, Canada, South Africa, America, Latin America and Australia, this book discusses recurring barriers to cluster development in the renewable energy sector. The authors look at the real-world dynamics and tensions between stakeholders on the ground, with a particular focus on the relationships between SMEs and other actors. This trans-regional study is unique in its scale and scope, drawing on a decade of field research to show how by learning from the successes and failures of other clusters, costs and risk can be reduced. The book fills a significant gap in the literature for policymakers, managers and economic developers in a key market.

Energy efficiency in social housing: Opportunities and barriers from a case study in Brazil

International Nuclear Information System (INIS)

Bodach, Susanne; Hamhaber, J.

2010-01-01

This paper investigates the energy efficiency in a segment of the building sector in emerging countries by analyzing and evaluating the energy efficiency of a social housing project in Brazil. Energy efficiency measures and bioclimatic design strategies are developed in order to improve thermal comfort in this social housing project and to reduce the energy consumption and expenses of their residents. The institutional barriers and constraints toward higher efficiency are described. The results of this study show that there is a high potential to increase energy efficiency in social housing in emerging countries like Brazil. The implementation and consideration of the energy efficiency measures and policy recommendations would contribute substantially to the goal to dampen the fast growth of energy demand in these countries. Moreover the improvement of energy efficiency in the social housing sector could be a driver for market transformation towards more sustainability in the whole building sector. - Research highlights: →There is a high potential to increase energy efficiency in social housing in Brazil. →Energy-efficient social housing would contribute substantially to dampen the fast growth of energy consumption in emerging countries like Brazil. →Implementation of energy efficiency would improve the income situation of the poorest strata of the population.

Deep inelastic scattering near the Coulomb barrier

International Nuclear Information System (INIS)

Gehring, J.; Back, B.; Chan, K.

1995-01-01

Deep inelastic scattering was recently observed in heavy ion reactions at incident energies near and below the Coulomb barrier. Traditional models of this process are based on frictional forces and are designed to predict the features of deep inelastic processes at energies above the barrier. They cannot be applied at energies below the barrier where the nuclear overlap is small and friction is negligible. The presence of deep inelastic scattering at these energies requires a different explanation. The first observation of deep inelastic scattering near the barrier was in the systems 124,112 Sn + 58,64 Ni by Wolfs et al. We previously extended these measurements to the system 136 Xe + 64 Ni and currently measured the system 124 Xe + 58 Ni. We obtained better statistics, better mass and energy resolution, and more complete angular coverage in the Xe + Ni measurements. The cross sections and angular distributions are similar in all of the Sn + Ni and Xe + Ni systems. The data are currently being analyzed and compared with new theoretical calculations. They will be part of the thesis of J. Gehring

Fission excitation function for 19F + 194,196,198Pt at near and above barrier energies

Directory of Open Access Journals (Sweden)

Singh Varinderjit

2015-01-01

Full Text Available Fission excitation functions for 19F + 194,196,198Pt reactions populating 213,215,217Fr compound nuclei are reported. Out of these three compound nuclei, 213Fr is a shell closed (N=126 compound nucleus and the other two are away from the shell closure. From a comparison of the experimental fission cross-sections with the statistical model predictions, it is observed that the fission cross-sections are underestimated by the statistical model predictions using shell corrected finite range rotating liquid drop model (FRLDM fission barriers. Further the FRLDM fission barriers are reduced to fit the fission cross-sections over the entire measured energy range.

Free Energy Calculations using a Swarm-Enhanced Sampling Molecular Dynamics Approach.

Science.gov (United States)

Burusco, Kepa K; Bruce, Neil J; Alibay, Irfan; Bryce, Richard A

2015-10-26

Free energy simulations are an established computational tool in modelling chemical change in the condensed phase. However, sampling of kinetically distinct substates remains a challenge to these approaches. As a route to addressing this, we link the methods of thermodynamic integration (TI) and swarm-enhanced sampling molecular dynamics (sesMD), where simulation replicas interact cooperatively to aid transitions over energy barriers. We illustrate the approach by using alchemical alkane transformations in solution, comparing them with the multiple independent trajectory TI (IT-TI) method. Free energy changes for transitions computed by using IT-TI grew increasingly inaccurate as the intramolecular barrier was heightened. By contrast, swarm-enhanced sampling TI (sesTI) calculations showed clear improvements in sampling efficiency, leading to more accurate computed free energy differences, even in the case of the highest barrier height. The sesTI approach, therefore, has potential in addressing chemical change in systems where conformations exist in slow exchange. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A novel approach for barriers to industrial energy efficiency

NARCIS (Netherlands)

Cagno, E.; Worrell, E.; Trianni, A.; Pugliese, G.

2013-01-01

A critical review of the literature highlighted the need for a new taxonomy encompassing the most relevant barriers stemmed from previous studies, and accounting for interactions and independences of the barriers to avoid overlaps and implicit interactions. Based on an extensive literature review

Fusion hindrance at deep sub-barrier energies for the 11B+197Au system

Science.gov (United States)

Shrivastava, A.; Mahata, K.; Nanal, V.; Pandit, S. K.; Parkar, V. V.; Rout, P. C.; Dokania, N.; Ramachandran, K.; Kumar, A.; Chatterjee, A.; Kailas, S.

2017-09-01

Fusion cross sections for the 11B+197Au system have been measured at energies around and deep below the Coulomb barrier, to probe the occurrence of fusion hindrance in case of asymmetric systems. A deviation with respect to the standard coupled channels calculations has been observed at the lowest energy. The results have been compared with an adiabatic model calculation that considers a damping of the coupling strength for a gradual transition from sudden to adiabatic regime at very low energies. The data could be explained without inclusion of the damping factor. This implies that the influence of fusion hindrance is not significant within the measured energy range for this system. The present result is consistent with the observed trend between the degree of fusion hindrance and the charge product that reveals a weaker influence of hindrance on fusion involving lighter projectiles on heavy targets.

Two-particle one-hole multiple-scattering contribution to 17O energies using an energy-dependent reaction matrix

International Nuclear Information System (INIS)

Bando, H.; Krenciglowa, E.M.

1976-01-01

The role of 2p1h correlations in 17 O is studied within a multiple-scattering formalism. An accurate, energy-dependent reaction matrix with orthogonalized plane-wave intermediate states is used to assess the relative importance of particle-particle and particle-hole correlations in the 17 O energies. The effect of energy dependence of the reaction matrix is closely examined. (Auth.)

Multiplicity and energy of neutrons from {sup 233}U(n{sub th},f) fission fragments

Energy Technology Data Exchange (ETDEWEB)

Nishio, Katsuhisa; Kimura, Itsuro; Nakagome, Yoshihiro [Kyoto Univ. (Japan)

1998-03-01

The correlation between fission fragments and prompt neutrons from the reaction {sup 233}U(n{sub th},f) was measured with improved accuracy. The results determined the neutron multiplicity and emission energy as a function of fragment mass and total kinetic energy. The average energy as a function of fragment mass followed a nearly symmetric distribution centered about the equal mass-split and formed a remarkable contrast with the saw-tooth distribution of the average neutron multiplicity. The neutron multiplicity from the specified fragment decreases linearly with total kinetic energy, and the slope of multiplicity with kinetic energy had the minimum value at about 130 u. The level density parameter versus mass determined from the neutron data showed a saw-tooth structure with the pronounced minimum at about 128 and generally followed the formula by Gilbert and Cameron, suggesting that the neutron emission process was very much affected by the shell-effect of the fission fragment. (author)

Nuclear reorganization barriers to electron transfer

International Nuclear Information System (INIS)

Sutin, N.; Brunschwig, B.S.; Creutz, C.; Winkler, J.R.

1988-01-01

The nuclear barrier to electron transfer arises from the need for reorganization of intramolecular and solvent internuclear distances prior to electron transfer. For reactions with relatively small driving force (''normal'' free-energy region) the nuclear factors and rates increase as intrinsic inner-shell and outer-shell barriers decrease; this is illustrated by data for transition metal complexes in their ground electronic states. By contrast, in the inverted free-energy region, rates and nuclear factors decrease with decreasing ''intrinsic'' barriers; this is illustrated by data for the decay of charge-transfer excited states. Several approaches to the evaluation of the outer-shell barrier are explored in an investigation of the distance dependence of the nuclear factor in intramolecular electron-transfer processes. 39 refs., 14 figs., 3 tabs

Charged Particle, Photon Multiplicity, and Transverse Energy Production in High-Energy Heavy-Ion Collisions

Directory of Open Access Journals (Sweden)

Raghunath Sahoo

2015-01-01

Full Text Available We review the charged particle and photon multiplicities and transverse energy production in heavy-ion collisions starting from few GeV to TeV energies. The experimental results of pseudorapidity distribution of charged particles and photons at different collision energies and centralities are discussed. We also discuss the hypothesis of limiting fragmentation and expansion dynamics using the Landau hydrodynamics and the underlying physics. Meanwhile, we present the estimation of initial energy density multiplied with formation time as a function of different collision energies and centralities. In the end, the transverse energy per charged particle in connection with the chemical freeze-out criteria is discussed. We invoke various models and phenomenological arguments to interpret and characterize the fireball created in heavy-ion collisions. This review overall provides a scope to understand the heavy-ion collision data and a possible formation of a deconfined phase of partons via the global observables like charged particles, photons, and the transverse energy measurement.

Energy prices, multiple structural breaks, and efficient market hypothesis

Energy Technology Data Exchange (ETDEWEB)

Lee, Chien-Chiang; Lee, Jun-De [Department of Applied Economics, National Chung Hsing University, Taichung (China)

2009-04-15

This paper investigates the efficient market hypothesis using total energy price and four kinds of various disaggregated energy prices - coal, oil, gas, and electricity - for OECD countries over the period 1978-2006. We employ a highly flexible panel data stationarity test of Carrion-i-Silvestre et al. [Carrion-i-Silvestre JL, Del Barrio-Castro T, Lopez-Bazo E. Breaking the panels: an application to GDP per capita. J Econometrics 2005;8:159-75], which incorporates multiple shifts in level and slope, thereby controlling for cross-sectional dependence through bootstrap methods. Overwhelming evidence in favor of the broken stationarity hypothesis is found, implying that energy prices are not characterized by an efficient market. Thus, it shows the presence of profitable arbitrage opportunities among energy prices. The estimated breaks are meaningful and coincide with the most critical events which affected the energy prices. (author)

Energy prices, multiple structural breaks, and efficient market hypothesis

International Nuclear Information System (INIS)

Lee, Chien-Chiang; Lee, Jun-De

2009-01-01

This paper investigates the efficient market hypothesis using total energy price and four kinds of various disaggregated energy prices - coal, oil, gas, and electricity - for OECD countries over the period 1978-2006. We employ a highly flexible panel data stationarity test of Carrion-i-Silvestre et al. [Carrion-i-Silvestre JL, Del Barrio-Castro T, Lopez-Bazo E. Breaking the panels: an application to GDP per capita. J Econometrics 2005;8:159-75], which incorporates multiple shifts in level and slope, thereby controlling for cross-sectional dependence through bootstrap methods. Overwhelming evidence in favor of the broken stationarity hypothesis is found, implying that energy prices are not characterized by an efficient market. Thus, it shows the presence of profitable arbitrage opportunities among energy prices. The estimated breaks are meaningful and coincide with the most critical events which affected the energy prices. (author)

Multiple Scattering Expansion of the Self-Energy at Finite Temperature

OpenAIRE

Jeon, Sangyong; Ellis, Paul J.

1998-01-01

An often used rule that the thermal correction to the self-energy is the thermal phase-space times the forward scattering amplitude from target particles is shown to be the leading term in an exact multiple scattering expansion. Starting from imaginary-time finite-temperature field theory, a rigorous expansion for the retarded self-energy is derived. The relationship to the thermodynamic potential is briefly discussed.

Anisotropic transport of normal metal-barrier-normal metal junctions in monolayer phosphorene.

Science.gov (United States)

De Sarkar, Sangita; Agarwal, Amit; Sengupta, K

2017-07-19

We study transport properties of a phosphorene monolayer in the presence of single and multiple potential barriers of height U 0 and width d, using both continuum and microscopic lattice models, and show that the nature of electron transport along its armchair edge (x direction) is qualitatively different from its counterpart in both conventional two-dimensional electron gas with Schrödinger-like quasiparticles and graphene or surfaces of topological insulators hosting massless Dirac quasiparticles. We show that the transport, mediated by massive Dirac electrons, allows one to achieve collimated quasiparticle motion along x and thus makes monolayer phosphorene an ideal experimental platform for studying Klein paradox in the context of gapped Dirac materials. We study the dependence of the tunneling conductance [Formula: see text] as a function of d and U 0 , and demonstrate that for a given applied voltage V its behavior changes from oscillatory to decaying function of d for a range of U 0 with finite non-zero upper and lower bounds, and provide analytical expression for these bounds within which G decays with d. We contrast such behavior of G with that of massless Dirac electrons in graphene and also with that along the zigzag edge (y direction) in phosphorene where the quasiparticles obey an effective Schrödinger equation at low energy. We also study transport through multiple barriers along x and demonstrate that these properties hold for transport through multiple barriers as well. Finally, we suggest concrete experiments which may verify our theoretical predictions.

Anisotropic transport of normal metal-barrier-normal metal junctions in monolayer phosphorene

Science.gov (United States)

De Sarkar, Sangita; Agarwal, Amit; Sengupta, K.

2017-07-01

We study transport properties of a phosphorene monolayer in the presence of single and multiple potential barriers of height U 0 and width d, using both continuum and microscopic lattice models, and show that the nature of electron transport along its armchair edge (x direction) is qualitatively different from its counterpart in both conventional two-dimensional electron gas with Schrödinger-like quasiparticles and graphene or surfaces of topological insulators hosting massless Dirac quasiparticles. We show that the transport, mediated by massive Dirac electrons, allows one to achieve collimated quasiparticle motion along x and thus makes monolayer phosphorene an ideal experimental platform for studying Klein paradox in the context of gapped Dirac materials. We study the dependence of the tunneling conductance G\\equiv {{G}xx} as a function of d and U 0, and demonstrate that for a given applied voltage V its behavior changes from oscillatory to decaying function of d for a range of U 0 with finite non-zero upper and lower bounds, and provide analytical expression for these bounds within which G decays with d. We contrast such behavior of G with that of massless Dirac electrons in graphene and also with that along the zigzag edge (y direction) in phosphorene where the quasiparticles obey an effective Schrödinger equation at low energy. We also study transport through multiple barriers along x and demonstrate that these properties hold for transport through multiple barriers as well. Finally, we suggest concrete experiments which may verify our theoretical predictions.

Pulse-height response of silicon surface-barrier detectors to high-energy heavy ions

International Nuclear Information System (INIS)

Smith, G.D.

1973-01-01

The pulse-height defect (PHD) of high-energy heavy ions in silicon surface-barrier detectors can be divided into three components: (1) energy loss in the gold-surface layer, (2) a nuclear-stopping defect, and (3) a defect due to recombination of electron-hole pairs in the plasma created by the heavy ion. The plasma recombination portion of the PHD was the subject of this study using the variation of the PHD with (1) the angle of incidence of incoming heavy ions, and (2) changes in the detector bias. The Tandem Van de Graaff accelerator at Argonne National Laboratory was used to produce scattered beam ions ( 32 S, 35 Cl) and heavy target recoils (Ni, Cu, 98 Mo, Ag, Au) at sufficient energies to produce a significant recombination defect. The results confirm the existence of a recombination zone at the front surface of these detectors and the significance of plasma recombination as a portion of the pulse-height defect. (Diss. Abstr. Int., B)

TCP (truncated compound Poisson) process for multiplicity distributions in high energy collisions

International Nuclear Information System (INIS)

Srivastave, P.P.

1990-01-01

On using the Poisson distribution truncated at zero for intermediate cluster decay in a compound Poisson process, the authors obtain TCP distribution which describes quite well the multiplicity distributions in high energy collisions. A detailed comparison is made between TCP and NB for UA5 data. The reduced moments up to the fifth agree very well with the observed ones. The TCP curves are narrower than NB at high multiplicity tail, look narrower at very high energy and develop shoulders and oscillations which become increasingly pronounced as the energy grows. At lower energies the distributions, of the data for fixed intervals of rapidity for UA5 data and for the data (at low energy) for e + e - annihilation and pion-proton, proton-proton and muon-proton scattering. A discussion of compound Poisson distribution, expression of reduced moments and Poisson transforms are also given. The TCP curves and curves of the reduced moments for different values of the parameters are also presented

Efficient sampling over rough energy landscapes with high barriers: A combination of metadynamics with integrated tempering sampling

Energy Technology Data Exchange (ETDEWEB)

Yang, Y. Isaac [Institute of Theoretical and Computational Chemistry, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871 (China); Zhang, Jun; Che, Xing; Yang, Lijiang; Gao, Yi Qin, E-mail: gaoyq@pku.edu.cn [Institute of Theoretical and Computational Chemistry, College of Chemistry and Molecular Engineering, Peking University, Beijing 100871 (China); Biodynamic Optical Imaging Center, Peking University, Beijing 100871 (China)

2016-03-07

In order to efficiently overcome high free energy barriers embedded in a complex energy landscape and calculate overall thermodynamics properties using molecular dynamics simulations, we developed and implemented a sampling strategy by combining the metadynamics with (selective) integrated tempering sampling (ITS/SITS) method. The dominant local minima on the potential energy surface (PES) are partially exalted by accumulating history-dependent potentials as in metadynamics, and the sampling over the entire PES is further enhanced by ITS/SITS. With this hybrid method, the simulated system can be rapidly driven across the dominant barrier along selected collective coordinates. Then, ITS/SITS ensures a fast convergence of the sampling over the entire PES and an efficient calculation of the overall thermodynamic properties of the simulation system. To test the accuracy and efficiency of this method, we first benchmarked this method in the calculation of ϕ − ψ distribution of alanine dipeptide in explicit solvent. We further applied it to examine the design of template molecules for aromatic meta-C—H activation in solutions and investigate solution conformations of the nonapeptide Bradykinin involving slow cis-trans isomerizations of three proline residues.

Generation of multiple excitons in Ag2S quantum dots: Single high-energy versus multiple-photon excitation

KAUST Repository

Sun, Jingya; Yu, Weili; Usman, Anwar; Isimjan, Tayirjan T.; Del Gobbo, Silvano; Alarousu, Erkki; Takanabe, Kazuhiro; Mohammed, Omar F.

2014-01-01

We explored biexciton generation via carrier multiplication (or multiple-exciton generation) by high-energy photons and by multiple-photon absorption in Ag2S quantum dots (QDs) using femtosecond broad-band transient absorption spectroscopy. Irrespective of the size of the QDs and how the multiple excitons are generated in the Ag2S QDs, two distinct characteristic time constants of 9.6-10.2 and 135-175 ps are obtained for the nonradiative Auger recombination of the multiple excitons, indicating the existence of two binding excitons, namely, tightly bound and weakly bound excitons. More importantly, the lifetimes of multiple excitons in Ag 2S QDs were about 1 and 2 orders of magnitude longer than those of comparable size PbS QDs and single-walled carbon nanotubes, respectively. This result is significant because it suggests that by utilizing an appropriate electron acceptor, there is a higher possibility to extract multiple electron-hole pairs in Ag2S QDs, which should improve the performance of QD-based solar cell devices. © 2014 American Chemical Society.

Generation of multiple excitons in Ag2S quantum dots: Single high-energy versus multiple-photon excitation

KAUST Repository

Sun, Jingya

2014-02-20

We explored biexciton generation via carrier multiplication (or multiple-exciton generation) by high-energy photons and by multiple-photon absorption in Ag2S quantum dots (QDs) using femtosecond broad-band transient absorption spectroscopy. Irrespective of the size of the QDs and how the multiple excitons are generated in the Ag2S QDs, two distinct characteristic time constants of 9.6-10.2 and 135-175 ps are obtained for the nonradiative Auger recombination of the multiple excitons, indicating the existence of two binding excitons, namely, tightly bound and weakly bound excitons. More importantly, the lifetimes of multiple excitons in Ag 2S QDs were about 1 and 2 orders of magnitude longer than those of comparable size PbS QDs and single-walled carbon nanotubes, respectively. This result is significant because it suggests that by utilizing an appropriate electron acceptor, there is a higher possibility to extract multiple electron-hole pairs in Ag2S QDs, which should improve the performance of QD-based solar cell devices. © 2014 American Chemical Society.

Deep inelastic scattering near the Coulomb barrier

Energy Technology Data Exchange (ETDEWEB)

Gehring, J.; Back, B.; Chan, K. [and others

1995-08-01

Deep inelastic scattering was recently observed in heavy ion reactions at incident energies near and below the Coulomb barrier. Traditional models of this process are based on frictional forces and are designed to predict the features of deep inelastic processes at energies above the barrier. They cannot be applied at energies below the barrier where the nuclear overlap is small and friction is negligible. The presence of deep inelastic scattering at these energies requires a different explanation. The first observation of deep inelastic scattering near the barrier was in the systems {sup 124,112}Sn + {sup 58,64}Ni by Wolfs et al. We previously extended these measurements to the system {sup 136}Xe + {sup 64}Ni and currently measured the system {sup 124}Xe + {sup 58}Ni. We obtained better statistics, better mass and energy resolution, and more complete angular coverage in the Xe + Ni measurements. The cross sections and angular distributions are similar in all of the Sn + Ni and Xe + Ni systems. The data are currently being analyzed and compared with new theoretical calculations. They will be part of the thesis of J. Gehring.

Collisions between heavy nuclei near the barrier

International Nuclear Information System (INIS)

Henning, W.

1988-05-01

Detailed information has recently become available on the reaction behavior in very heavy nuclear systems close to the Coulomb barrier. Starting from an experimental study of the distribution of the reaction strength above and below the barrier, the dominant reaction channels of quasi-elastic and strongly-damped processes are examined. With decreasing incident energy, the sub-barrier collisions are increasingly dominated by quasi-elastic processes. From the division of internal excitation energy, new information is obtained on the nature of the dissipative processes. (orig.)

Collaboration Mechanism for Equipment Instruction of Multiple Energy Systems

Science.gov (United States)

Wang, Dong; Wang, Tuo; Wang, Qi; Zhang, Zhao; Zhao, Mingyu; Wang, Yinghui

2018-01-01

When multiple energy systems execute optimization instructions simultaneously, and the same equipment is Shared, the instruction conflict may occur. Aiming at the above problems, taking into account the control objectives of each system, the characteristics of different systems, such as comprehensive clean energy, energy efficiency, and peak filling, etc., designed the instruction coordination mechanism for the daemon. This mechanism mainly acts on the main station of the system, and form a final optimization instruction. For some specific scenarios, the collaboration mechanism of unlocking the terminal is supplemented. The mechanism determines the specific execution instructions based on the arrival time of the instruction. Finally, the experiment in Tianjin eco-city shows that this algorithm can meet the instruction and collaboration requirements of multi-energy systems, and ensure the safe operation of the equipment.

Rapidity and multiplicity correlations in high energy hadronic collisions

International Nuclear Information System (INIS)

Heiselberg, H.

1993-01-01

Rapidity and multiplicity correlations of particle production in high energy hadronic collisions are studied. A simple model including short range correlations in rapidity due to clustering and long range correlations due to energy conservation is able to describe the two-body correlation functions well hadron-nucleon collisions around lab energies of 250 GeV. In this model fractional moments are calculated and compared to data. The strong rise of the factorial moments in rapidity intervals by size δy∝1 can be explained by long and short range correlation alone whereas the factorial moments approach a constant value at very small δy due to lack of correlations also in agreement with experiment. There is therefore no need for introducing intermittency in the particle production in hadronic collisions at these energies. (orig.)

Multiple scattering expansion of the self-energy at finite temperature

International Nuclear Information System (INIS)

Jeon, S.; Ellis, P.J.

1998-01-01

An often used rule that the thermal correction to the self-energy is the thermal phase-space times the forward scattering amplitude from target particles is shown to be the leading term in an exact multiple scattering expansion. Starting from imaginary-time finite-temperature field theory, a rigorous expansion for the retarded self-energy is derived. The relationship to the thermodynamic potential is briefly discussed. copyright 1998 The American Physical Society

Influence of average ion energy and atomic oxygen flux per Si atom on the formation of silicon oxide permeation barrier coatings on PET

Science.gov (United States)

Mitschker, F.; Wißing, J.; Hoppe, Ch; de los Arcos, T.; Grundmeier, G.; Awakowicz, P.

2018-04-01

The respective effect of average incorporated ion energy and impinging atomic oxygen flux on the deposition of silicon oxide (SiO x ) barrier coatings for polymers is studied in a microwave driven low pressure discharge with additional variable RF bias. Under consideration of plasma parameters, bias voltage, film density, chemical composition and particle fluxes, both are determined relative to the effective flux of Si atoms contributing to film growth. Subsequently, a correlation with barrier performance and chemical structure is achieved by measuring the oxygen transmission rate (OTR) and by performing x-ray photoelectron spectroscopy. It is observed that an increase in incorporated energy to 160 eV per deposited Si atom result in an enhanced cross-linking of the SiO x network and, therefore, an improved barrier performance by almost two orders of magnitude. Furthermore, independently increasing the number of oxygen atoms to 10 500 per deposited Si atom also lead to a comparable barrier improvement by an enhanced cross-linking.

Investigation of 17F+p elastic scattering at near-barrier energies

International Nuclear Information System (INIS)

El-Azab Farid, M.; Ibraheem, Awad A.; Al-Hajjaji, Arwa S.

2015-01-01

The 17 F +p elastic scattering at two near-barrier energies of 3.5 and 4.3 MeV/nucleon, have been analyzed in the framework of the single folding approach. The folded potentials are constructed by folding the density-dependent (DDM3Y) effective nucleon-nucleon interaction over the nuclear density of the one-proton halo nucleus 17 F. Two versions of the density are considered. In addition, two versions of the one-nucleon knock-on exchange potentials are introduced to construct the real microscopic potentials. The derived potentials supplemented by phenomenological Woods-Saxon imaginary and spin-orbit potentials produced excellent description of the differential elastic scattering cross sections at the higher energy without need to introduce any renormalization. At the lower energy, however, in order to successfully reproduce the data, it is necessary to reduce the strength of the constructed real DDM3Y potential by about 25% of its original value. Furthermore, good agreement with data is obtained using the extracted microscopic DDM3Y potentials for both real and imaginary parts. Moreover, the interesting notch test is applied to investigate the sensitivity of the elastic scattering cross section to the radial distribution of the constructed microscopic potentials. The extracted reaction (absorption) cross sections are, also, investigated. (orig.)

Structural-morphological variations in pseudo-barrier films of anode aluminium oxide under irradiation with high-energy particles

International Nuclear Information System (INIS)

Chernykh, M.A.; Belov, V.T.

1988-01-01

Comparative study of structural-morphological variations under electron beam effect in pseudo-barrier films of anode aluminium oxide, obtained in seven different solutions and proton or X-rays pre-irradiated to determine structure peculiarities of anode aluminium oxides, is presented. Such study is a matter of interest from the solid-phase transformation theory point of view and for anode aluminium films application under radiation. Stability increase of pseudo-barrier films of anode aluminium oxide to the effect of UEhMV-100 K microscope electron beam at standard modes of operation (75 kV) due to proton or X-rays irradiation is found. Difference in structural-monorphological variations obtained in different solutions of anode aluminium films under high-energy particles irradiation is determined. Strucural-phase microinhomogeneity of amorphous pseudo-barrier films of anode aluminium oxide and its influence on solid-phase transformations character under electron bean of maximal intensity are detected

Barriers to the diffusion of renewable energy technologies - A case study of the state of Maharashtra, India

Energy Technology Data Exchange (ETDEWEB)

Reddy, B.S. [Indira Gandhi Inst. of Development Research, Mumbai (India)

2001-07-01

India's expanding economy and the strong growth expected in the next few decades (at around 10% per annum), will require additional energy. The use of fossil fuels is likely to dominate the strategy for meeting these needs in the near and medium term. However, India's own reserves are finite and will only be available for a limited period and the use of fossil fuels is not sustainable and is directly linked to environmental problems, particularly CO{sub 2} emissions and climate change. The importance of the increasing use of renewable energy sources was recognized in India in the early 1970s. During the past quarter century, a significant effort has gone into the development, trial and induction of a variety of technologies for use in different sectors. Today, India has one of the world's largest programs for renewable energy. The activities cower all the major renewable energy sources, including biogas, biomass, solar, wind and small-hydro power and other emerging technologies. By the end of 20th century nearly three million family-sized biogas plants (second in number in the world and next only to China's) and 30 million improved wood stoves have been established. These technologies could save about 15 million tons of fuel wood every year. Several other renewable energy technologies and products are now commercially available, and are economically viable in comparison to fossil fuels for some applications. However, there are many barriers to achieve the full potential of the renewable energy technologies. In order to study the potential and evaluate different RETs, we carried out a study of barriers to RETs in the state of Maharashtra, which accounts for about 16% of the Gross Domestic Product and 17% of the electricity supply in India. The study has been carried out in two parts. In the first part analysis was done on two technologies, viz., solar and wind. For doing this, information was collected from various secondary sources such as

Multiple Jets at the LHC with High Energy Jets

DEFF Research Database (Denmark)

Andersen, Jeppe Rosenkrantz; Smillie, Jennifer M.

2011-01-01

We present a flexible Monte Carlo implementation of the perturbative framework of High Energy Jets, describing multi-jet events at hadron colliders. The description includes a resummation which ensures leading logarithmic accuracy for large invariant mass between jets, and is matched to tree......-level accuracy for multiplicities up to 4 jets. The resummation includes all-order hard corrections, which become important for increasing centre-of-mass energy of the hadronic collision. We discuss observables relevant for confronting the perturbative framework with 7 TeV data from the LHC, and the impact...

Transport barriers in bootstrap-driven tokamaks

Science.gov (United States)

Staebler, G. M.; Garofalo, A. M.; Pan, C.; McClenaghan, J.; Van Zeeland, M. A.; Lao, L. L.

2018-05-01

Experiments have demonstrated improved energy confinement due to the spontaneous formation of an internal transport barrier in high bootstrap fraction discharges. Gyrokinetic analysis, and quasilinear predictive modeling, demonstrates that the observed transport barrier is caused by the suppression of turbulence primarily from the large Shafranov shift. It is shown that the Shafranov shift can produce a bifurcation to improved confinement in regions of positive magnetic shear or a continuous reduction in transport for weak or negative magnetic shear. Operation at high safety factor lowers the pressure gradient threshold for the Shafranov shift-driven barrier formation. Two self-organized states of the internal and edge transport barrier are observed. It is shown that these two states are controlled by the interaction of the bootstrap current with magnetic shear, and the kinetic ballooning mode instability boundary. Election scale energy transport is predicted to be dominant in the inner 60% of the profile. Evidence is presented that energetic particle-driven instabilities could be playing a role in the thermal energy transport in this region.

High Performance Multi Barrier Thermionic Devices

National Research Council Canada - National Science Library

Vashaee, Daryoosh; Shakouri, Ali

2003-01-01

Thermoelectric transport perpendicular to layers in multiple barrier superlattice structures is investigated theoretically in two limiting cases of no lateral momentum scattering and strong scattering...

Systems study on engineered barriers: barrier performance analysis

International Nuclear Information System (INIS)

Stula, R.T.; Albert, T.E.; Kirstein, B.E.; Lester, D.H.

1980-09-01

A performance assessment model for multiple barrier packages containing unreprocessed spent fuel has been modified and applied to several package designs. The objective of the study was to develop information to be used in programmatic decision making concerning engineered barrier package design and development. The assessment model, BARIER, was developed in previous tasks of the System Study on Engineered Barriers (SSEB). The new version discussed in this report contains a refined and expanded corrosion rate data base which includes pitting, crack growth, and graphitization as well as bulk corrosion. Corrosion rates for oxic and anoxic conditions at each of the two temperature ranges are supplied. Other improvements include a rigorous treatment of radionuclide release after package failure which includes resistance of damaged barriers and backfill, refined temperature calculations that account for convection and radiation, a subroutine to calculate nuclear gamma radiation field at each barrier surface, refined stress calculations with reduced conservatism and various coding improvements to improve running time and core usage. This report also contains discussion of alternative scenarios to the assumed flooded repository as well as the impact of water exclusion backfills. The model was used to assess post repository closure performance for several designs which were all variation of basic designs from the Spent Unreprocessed Fuel (SURF) program. Many designs were found to delay the onset of leaching by at least a few hundreds of years in all geologic media. Long delay times for radionuclide release were found for packages with a few inches of sorption backfill. Release of uranium, plutonium, and americium was assessed

Systems study on engineered barriers: barrier performance analysis

Energy Technology Data Exchange (ETDEWEB)

Stula, R.T.; Albert, T.E.; Kirstein, B.E.; Lester, D.H.

1980-09-01

A performance assessment model for multiple barrier packages containing unreprocessed spent fuel has been modified and applied to several package designs. The objective of the study was to develop information to be used in programmatic decision making concerning engineered barrier package design and development. The assessment model, BARIER, was developed in previous tasks of the System Study on Engineered Barriers (SSEB). The new version discussed in this report contains a refined and expanded corrosion rate data base which includes pitting, crack growth, and graphitization as well as bulk corrosion. Corrosion rates for oxic and anoxic conditions at each of the two temperature ranges are supplied. Other improvements include a rigorous treatment of radionuclide release after package failure which includes resistance of damaged barriers and backfill, refined temperature calculations that account for convection and radiation, a subroutine to calculate nuclear gamma radiation field at each barrier surface, refined stress calculations with reduced conservatism and various coding improvements to improve running time and core usage. This report also contains discussion of alternative scenarios to the assumed flooded repository as well as the impact of water exclusion backfills. The model was used to assess post repository closure performance for several designs which were all variation of basic designs from the Spent Unreprocessed Fuel (SURF) program. Many designs were found to delay the onset of leaching by at least a few hundreds of years in all geologic media. Long delay times for radionuclide release were found for packages with a few inches of sorption backfill. Release of uranium, plutonium, and americium was assessed.

Free Energy Reconstruction from Logarithmic Mean-Force Dynamics Using Multiple Nonequilibrium Trajectories.

Science.gov (United States)

Morishita, Tetsuya; Yonezawa, Yasushige; Ito, Atsushi M

2017-07-11

Efficient and reliable estimation of the mean force (MF), the derivatives of the free energy with respect to a set of collective variables (CVs), has been a challenging problem because free energy differences are often computed by integrating the MF. Among various methods for computing free energy differences, logarithmic mean-force dynamics (LogMFD) [ Morishita et al., Phys. Rev. E 2012 , 85 , 066702 ] invokes the conservation law in classical mechanics to integrate the MF, which allows us to estimate the free energy profile along the CVs on-the-fly. Here, we present a method called parallel dynamics, which improves the estimation of the MF by employing multiple replicas of the system and is straightforwardly incorporated in LogMFD or a related method. In the parallel dynamics, the MF is evaluated by a nonequilibrium path-ensemble using the multiple replicas based on the Crooks-Jarzynski nonequilibrium work relation. Thanks to the Crooks relation, realizing full-equilibrium states is no longer mandatory for estimating the MF. Additionally, sampling in the hidden subspace orthogonal to the CV space is highly improved with appropriate weights for each metastable state (if any), which is hardly achievable by typical free energy computational methods. We illustrate how to implement parallel dynamics by combining it with LogMFD, which we call logarithmic parallel dynamics (LogPD). Biosystems of alanine dipeptide and adenylate kinase in explicit water are employed as benchmark systems to which LogPD is applied to demonstrate the effect of multiple replicas on the accuracy and efficiency in estimating the free energy profiles using parallel dynamics.

Radiant Barriers Save Energy in Buildings

Science.gov (United States)

2014-01-01

Langley Research Center needed to coat the Echo 1 satellite with a fine mist of vaporized metal, and collaborated with industry to create "radiant barrier technology." In 2010, Ryan Garrett learned about a new version of the technology resistant to oxidation and founded RadiaSource in Ogden, Utah, to provide the NASA-derived technology for applications in homes, warehouses, gymnasiums, and agricultural settings.

Barrier for cold-fusion production of superheavy elements

International Nuclear Information System (INIS)

Ichikawa, Takatoshi; Iwamoto, Akira; Moeller, Peter; Sierk, Arnold J.

2005-01-01

We estimate the fusion-barrier height B fu (two-body) for approaching ions in cold-fusion reactions in a model where the projectile deformation and quadrupole zero-point vibrational energy are taken into account. This barrier height is defined as the barrier energy at the target and projectile separation distance where an original oblate deformation of projectile and/or target caused by a repulsive Coulomb force turns into a large prolate deformation caused by the attractive nuclear force as the target and projectile come closer. The instability develops before touching because the attractive short-range nuclear force overcomes the repulsive Coulomb force and the shape-stabilizing effect of shell structure. The shell structure of the doubly magic 208 Pb target is sufficiently strong that its shape remains very close to spherical in all cases studied here. The fusion potential for approaching ions in the two-body channel is calculated in the macroscopic-microscopic model with the quadrupole vibrational zero-point energy obtained in the WKB approximation. We compare our results with data from 10 experimental cold-fusion reactions and with the Bass barriers. Differences and similarities between the Yukawa-plus-exponential model and the Bass model are discussed. We also calculate five-dimensional potential-energy surfaces for the single compound system and show that well-established fission and fusion valleys are both present. For heavy systems, B fu (two-body) becomes lower than the fission barrier just beyond the ground state of the compound system. In the vicinity of this transition, the optimum collision energy for formation of evaporation residues can be expected to depend in a delicate fashion on the interplay among B fu (two-body) , the fusion valley, the fission barrier of the compound system, and the one- and two-neutron separation energies S 1n and S 2n . We discuss these issues in detail and calculate fission-barrier heights. Except for reactions in which

Analysis of complete fusion excitation functions for 7Li+152Sm, 197Au and 209Bi reactions at around barrier energies

International Nuclear Information System (INIS)

Kharab, Rajesh; Chahal, Rajiv; Kumar, Rajiv

2017-01-01

In the present work we have analyzed the fusion excitation function for CF process using the simple Wong’s formula in conjunction with the energy dependent Woods-Saxon potential (EDWSP) in near barrier energy region for 7 Li+ 152 Sm, 197 Au and 209 Bi reactions

Hindered rotational energy barriers of BH4- tetrahedra in β-Mg(BH4)2 from quasielastic neutron scattering and DFT calculations

DEFF Research Database (Denmark)

Blanchard, Didier; Maronsson, Jon Bergmann; Riktor, M.D.

2012-01-01

, around the 2-fold (C2) and 3-fold (C3) axes were observed at temperatures from 120 to 440 K. The experimentally obtained activation energies (EaC2 = 39 and 76 meV and EaC3 = 214 meV) and mean residence times between reorientational jumps are comparable with the energy barriers obtained from DFT......In this work, hindered rotations of the BH4- tetrahedra in Mg(BH4)2 were studied by quasielastic neutron scattering, using two instruments with different energy resolution, in combination with density functional theory (DFT) calculations. Two thermally activated reorientations of the BH4- units...... calculations. A linear dependency of the energy barriers for rotations around the C2 axis parallel to the Mg-Mg axis with the distance between these two axes was revealed by the DFT calculations. At the lowest temperature (120 K) only 15% of the BH4- units undergo rotational motion and from comparison with DFT...

Identification of optimal strategies for energy management systems planning under multiple uncertainties

International Nuclear Information System (INIS)

Cai, Y.P.; Huang, G.H.; Yang, Z.F.; Tan, Q.

2009-01-01

Management of energy resources is crucial for many regions throughout the world. Many economic, environmental and political factors are having significant effects on energy management practices, leading to a variety of uncertainties in relevant decision making. The objective of this research is to identify optimal strategies in the planning of energy management systems under multiple uncertainties through the development of a fuzzy-random interval programming (FRIP) model. The method is based on an integration of the existing interval linear programming (ILP), superiority-inferiority-based fuzzy-stochastic programming (SI-FSP) and mixed integer linear programming (MILP). Such a FRIP model allows multiple uncertainties presented as interval values, possibilistic and probabilistic distributions, as well as their combinations within a general optimization framework. It can also be used for facilitating capacity-expansion planning of energy-production facilities within a multi-period and multi-option context. Complexities in energy management systems can be systematically reflected, thus applicability of the modeling process can be highly enhanced. The developed method has then been applied to a case of long-term energy management planning for a region with three cities. Useful solutions for the planning of energy management systems were generated. Interval solutions associated with different risk levels of constraint violation were obtained. They could be used for generating decision alternatives and thus help decision makers identify desired policies under various economic and system-reliability constraints. The solutions can also provide desired energy resource/service allocation and capacity-expansion plans with a minimized system cost, a maximized system reliability and a maximized energy security. Tradeoffs between system costs and constraint-violation risks could be successfully tackled, i.e., higher costs will increase system stability, while a desire for lower

What are the barriers and incentives for community-owned means of energy production and use?

International Nuclear Information System (INIS)

Walker, Gordon

2008-01-01

This paper on community-owned means of renewable energy production and use, reviews experience to date in the UK and the incentives for and barriers limiting current and future growth. A broad view is taken of what the meaning of 'community-owned production and use' might constitute, as there are different models of community ownership, different notions of community and different degrees of connection or disconnection between production and use

A Multiple Period Problem in Distributed Energy Management Systems Considering CO2 Emissions

Science.gov (United States)

Muroda, Yuki; Miyamoto, Toshiyuki; Mori, Kazuyuki; Kitamura, Shoichi; Yamamoto, Takaya

Consider a special district (group) which is composed of multiple companies (agents), and where each agent responds to an energy demand and has a CO2 emission allowance imposed. A distributed energy management system (DEMS) optimizes energy consumption of a group through energy trading in the group. In this paper, we extended the energy distribution decision and optimal planning problem in DEMSs from a single period problem to a multiple periods one. The extension enabled us to consider more realistic constraints such as demand patterns, the start-up cost, and minimum running/outage times of equipment. At first, we extended the market-oriented programming (MOP) method for deciding energy distribution to the multiple periods problem. The bidding strategy of each agent is formulated by a 0-1 mixed non-linear programming problem. Secondly, we proposed decomposing the problem into a set of single period problems in order to solve it faster. In order to decompose the problem, we proposed a CO2 emission allowance distribution method, called an EP method. We confirmed that the proposed method was able to produce solutions whose group costs were close to lower-bound group costs by computational experiments. In addition, we verified that reduction in computational time was achieved without losing the quality of solutions by using the EP method.

Transverse energy and charged particle multiplicity in 14.6 GeV/c proton-nucleus collisions

International Nuclear Information System (INIS)

Wang, Gang

1995-01-01

Transverse energy and charged particle multiplicity produced in 14.6 GeV/c p + Al and p + Pb collisions have been studied using the E814 set-up at the BNL-AGS. Measurements of dσ/dE T , dE T /dη,dσ/dN c , and dN c /dη are presented. From the present data the mean transverse energy per particle is obtained and it is compared to values observed in Si induced collisions at the same energy In contrast to what is observed in nucleus-nucleus collisions, a very weak correlation is found between the transverse energy and the charged particle multiplicity. These results are compared to the predictions of various theoretical models used to describe heavy-ion collisions. The event generators RQMD and HIJET reproduce well the pseudorapidity distribution of both the transverse energy and charged particle multiplicity, whereas FRITIOF fails to reproduce the measured distributions. Contrary to what had been suggested previously in a Si + A study, the present study shows that the pseudorapidity dependence of charged particle multiplicity distributions do not follow KNO scaling. (author)

A comparative study of wood highway sound barriers

Science.gov (United States)

Stefan Grgurevich; Thomas Boothby; Harvey Manbeck; Courtney Burroughs; Stephen Cegelka; Craig Bernecker; Michael A. Ritter

2002-01-01

Prototype designs for wood highway sound barriers meeting the multiple criteria of structural integrity, acoustic effectiveness, durability, and potential for public acceptance have been developed. Existing installations of wood sound barriers were reviewed and measurements conducted in the field to estimate acoustic insertion losses. A complete matrix of design...

Barriers against psychosocial communication: oncologists' perceptions.

Science.gov (United States)

Fagerlind, Hanna; Kettis, Åsa; Glimelius, Bengt; Ring, Lena

2013-10-20

To explore oncologists' psychosocial attitudes and beliefs and their perceptions regarding barriers against psychosocial communication. A questionnaire was distributed to oncologists in Sweden (n = 537). Questions covered demography, the Physician Psychosocial Beliefs Scale (PPBS), and barriers against psychosocial communication. Stepwise multiple regression was used to determine what factors contribute the most to the PPBS score and the total number of barriers and barriers affecting clinical practice, respectively. Spearman rank-order correlation was used to determine correlation between PPBS score and number of barriers. Questionnaire response rate was 64%. Mean PPBS value was 85.5 (range, 49 to 123; SD, 13.0). Most oncologists (93%) perceived one or more barriers in communicating psychosocial aspects with patients. On average, five different communication barriers were perceived, of which most were perceived to affect clinical practice. These barriers included insufficient consultation time, lack of resources for taking care of problems discovered, and lack of methods to evaluate patients' psychosocial health in clinical practice. There was a positive correlation (rs = 0.490; P barriers (ie, less psychosocially oriented oncologists perceived more barriers). Oncologists with supplementary education with a psychosocial focus perceived fewer barriers/barriers affecting clinical practice (P barriers affecting psychosocial communication in clinical practice. Interventions aiming to improve psychosocial communication must therefore be multifaceted and individualized to clinics and individual oncologists. It is important to minimize barriers to facilitate optimal care and treatment of patients with cancer.

Sub-barrier fusion and near-barrier quasi-elastic scattering

International Nuclear Information System (INIS)

Kolata, J.J.; Tighe, R.J.

1990-01-01

Elastic scattering of 32 S on 58,64 Ni and fusion of 32 S+ 58,64 Ni and 34 S+ 64 Ni have been measured at energies near the Coulomb barrier. Our results differ in several important respects from previous measurements on these systems. Coupled-channels calculations which explicitly allow for inelastic excitation and single-nucleon transfer reproduce the main features of the new data. Near-barrier elastic scattering of 48 Ca on 40 Ca has also been measured. These data provide evidence for the effect of strong coupling to positive Q-value channels other than single-nucleon transfer. 18 refs., 3 figs

Multiple Interfacial Fe3O4@BaTiO3/P(VDF-HFP) Core-Shell-Matrix Films with Internal Barrier Layer Capacitor (IBLC) Effects and High Energy Storage Density.

Science.gov (United States)

Zhou, Ling; Fu, Qiuyun; Xue, Fei; Tang, Xiahui; Zhou, Dongxiang; Tian, Yahui; Wang, Geng; Wang, Chaohong; Gou, Haibo; Xu, Lei

2017-11-22

Flexible nanocomposites composed of high dielectric constant fillers and polymer matrix have shown great potential for electrostatic capacitors and energy storage applications. To obtain the composited material with high dielectric constant and high breakdown strength, multi-interfacial composited particles, which composed of conductive cores and insulating shells and possessed the internal barrier layer capacitor (IBLC) effect, were adopted as fillers. Thus, Fe 3 O 4 @BaTiO 3 core-shell particles were prepared and loaded into the poly(vinylidene fluoride-co-hexafluoropropylene) (P(VDF-HFP)) polymer matrix. As the mass fraction of core-shell fillers increased from 2.5 wt % to 30 wt %, the dielectric constant of the films increased, while the loss tangent remained at a low level (capacitor model was also adopted to interpret the efficiency of IBLC effects on the suppressed loss tangent and the superior breakdown strength. This work explored an effective approach to prepare dielectric nanocomposites for energy storage applications experimentally and theoretically.

Incorporating Multiple Energy Relay Dyes in Liquid Dye-Sensitized Solar Cells

KAUST Repository

Yum, Jun-Ho

2011-01-05

Panchromatic response is essential to increase the light-harvesting efficiency in solar conversion systems. Herein we show increased light harvesting from using multiple energy relay dyes inside dye-sensitized solar cells. Additional photoresponse from 400-590 nm matching the optical window of the zinc phthalocyanine sensitizer was observed due to Förster resonance energy transfer (FRET) from the two energy relay dyes to the sensitizing dye. The complementary absorption spectra of the energy relay dyes and high excitation transfer efficiencies result in a 35% increase in photovoltaic performance. © 2011 Wiley-VCH Verlag GmbH& Co. KGaA.

Energy dependence of the charged multiplicity in deep inelastic scattering at HERA

International Nuclear Information System (INIS)

Chekanov, S.; Derrick, M.; Magill, S.

2008-03-01

The charged multiplicity distributions and the mean charged multiplicity have been investigated in inclusive neutral current deep inelastic ep scattering with the ZEUS detector at HERA, using an integrated luminosity of 38.6 pb -1 . The measurements were performed in the current region of the Breit frame, as well as in the current fragmentation region of the hadronic centre-of-mass frame. The KNO-scaling properties of the data were investigated and the energy dependence was studied using different energy scales. The data are compared to results obtained in e + e - collisions and to previous DIS measurements as well as to leading-logarithm parton-shower Monte Carlo predictions. (orig.)

Incorporating Multiple Energy Relay Dyes in Liquid Dye-Sensitized Solar Cells

KAUST Repository

Yum, Jun-Ho; Hardin, Brian E.; Hoke, Eric T.; Baranoff, Etienne; Zakeeruddin, Shaik M.; Nazeeruddin, Mohammad K.; Torres, Tomas; McGehee, Michael D.; Grä tzel, Michael

2011-01-01

Panchromatic response is essential to increase the light-harvesting efficiency in solar conversion systems. Herein we show increased light harvesting from using multiple energy relay dyes inside dye-sensitized solar cells. Additional photoresponse

Conductance of graphene-based double-barrier nanostructures

Energy Technology Data Exchange (ETDEWEB)

Setare, M R [Department of Campus of Bijar, University of Kurdistan, Bijar (Iran, Islamic Republic of); Jahani, D, E-mail: Rezakord@ipm.co, E-mail: Dariush110@gmail.co [Department of Physics, Razi University, Kermanshah (Iran, Islamic Republic of)

2010-12-22

The effect of a mass gap on the conductance of graphene double-barrier heterojunctions is studied. By obtaining the 2D expression for the electronic transport of the low energy excitations of pure graphene through double-barrier systems, it is found that the conductivity of these structures does not depend on the type of charge carriers in the zones of the electric field. However, a finite induced gap in the graphene spectrum makes conductivity dependent on the energy band index. We also discuss a few controversies concerning double-barrier systems stemming from an improper choice of the scattering angle. Then it is observed that, for some special values of the incident energy and potential's height, graphene junctions behave like left-handed materials, resulting in a maximum value for the conductivity.

Conductance of graphene-based double-barrier nanostructures

International Nuclear Information System (INIS)

Setare, M R; Jahani, D

2010-01-01

The effect of a mass gap on the conductance of graphene double-barrier heterojunctions is studied. By obtaining the 2D expression for the electronic transport of the low energy excitations of pure graphene through double-barrier systems, it is found that the conductivity of these structures does not depend on the type of charge carriers in the zones of the electric field. However, a finite induced gap in the graphene spectrum makes conductivity dependent on the energy band index. We also discuss a few controversies concerning double-barrier systems stemming from an improper choice of the scattering angle. Then it is observed that, for some special values of the incident energy and potential's height, graphene junctions behave like left-handed materials, resulting in a maximum value for the conductivity.

Conductance of graphene-based double-barrier nanostructures.

Science.gov (United States)

Setare, M R; Jahani, D

2010-12-22

The effect of a mass gap on the conductance of graphene double-barrier heterojunctions is studied. By obtaining the 2D expression for the electronic transport of the low energy excitations of pure graphene through double-barrier systems, it is found that the conductivity of these structures does not depend on the type of charge carriers in the zones of the electric field. However, a finite induced gap in the graphene spectrum makes conductivity dependent on the energy band index. We also discuss a few controversies concerning double-barrier systems stemming from an improper choice of the scattering angle. Then it is observed that, for some special values of the incident energy and potential's height, graphene junctions behave like left-handed materials, resulting in a maximum value for the conductivity.

Simultaneous escaping of explicit and hidden free energy barriers: application of the orthogonal space random walk strategy in generalized ensemble based conformational sampling.

Science.gov (United States)

Zheng, Lianqing; Chen, Mengen; Yang, Wei

2009-06-21

To overcome the pseudoergodicity problem, conformational sampling can be accelerated via generalized ensemble methods, e.g., through the realization of random walks along prechosen collective variables, such as spatial order parameters, energy scaling parameters, or even system temperatures or pressures, etc. As usually observed, in generalized ensemble simulations, hidden barriers are likely to exist in the space perpendicular to the collective variable direction and these residual free energy barriers could greatly abolish the sampling efficiency. This sampling issue is particularly severe when the collective variable is defined in a low-dimension subset of the target system; then the "Hamiltonian lagging" problem, which reveals the fact that necessary structural relaxation falls behind the move of the collective variable, may be likely to occur. To overcome this problem in equilibrium conformational sampling, we adopted the orthogonal space random walk (OSRW) strategy, which was originally developed in the context of free energy simulation [L. Zheng, M. Chen, and W. Yang, Proc. Natl. Acad. Sci. U.S.A. 105, 20227 (2008)]. Thereby, generalized ensemble simulations can simultaneously escape both the explicit barriers along the collective variable direction and the hidden barriers that are strongly coupled with the collective variable move. As demonstrated in our model studies, the present OSRW based generalized ensemble treatments show improved sampling capability over the corresponding classical generalized ensemble treatments.

Security barriers with automated reconnaissance

Science.gov (United States)

McLaughlin, James O; Baird, Adam D; Tullis, Barclay J; Nolte, Roger Allen

2015-04-07

An intrusion delaying barrier includes primary and secondary physical structures and can be instrumented with multiple sensors incorporated into an electronic monitoring and alarm system. Such an instrumented intrusion delaying barrier may be used as a perimeter intrusion defense and assessment system (PIDAS). Problems with not providing effective delay to breaches by intentional intruders and/or terrorists who would otherwise evade detection are solved by attaching the secondary structures to the primary structure, and attaching at least some of the sensors to the secondary structures. By having multiple sensors of various types physically interconnected serves to enable sensors on different parts of the overall structure to respond to common disturbances and thereby provide effective corroboration that a disturbance is not merely a nuisance or false alarm. Use of a machine learning network such as a neural network exploits such corroboration.

Sleep Management on Multiple Machines for Energy and Flow Time

DEFF Research Database (Denmark)

Chan, Sze-Hang; Lam, Tak-Wah; Lee, Lap Kei

2011-01-01

In large data centers, determining the right number of operating machines is often non-trivial, especially when the workload is unpredictable. Using too many machines would waste energy, while using too few would affect the performance. This paper extends the traditional study of online flow-time...... scheduling on multiple machines to take sleep management and energy into consideration. Specifically, we study online algorithms that can determine dynamically when and which subset of machines should wake up (or sleep), and how jobs are dispatched and scheduled. We consider schedules whose objective...... is to minimize the sum of flow time and energy, and obtain O(1)-competitive algorithms for two settings: one assumes machines running at a fixed speed, and the other allows dynamic speed scaling to further optimize energy usage. Like the previous work on the tradeoff between flow time and energy, the analysis...

Energy barriers for interlayer diffusion in Pt/Pt(111) and Rh/Rh(111) homoepitaxy: small islands

Czech Academy of Sciences Publication Activity Database

Máca, František; Kotrla, Miroslav; Trushin, O. S.

1999-01-01

Roč. 49, č. 11 (1999), s. 1591-1596 ISSN 0011-4626. [Symposium on Surface Physics /8./. Třešť, 28.06.1999-02.07.1999] R&D Projects: GA MŠk OC P3.80 Institutional research plan: CEZ:AV0Z1010914 Keywords : molecular statics * energy barriers * Pt and Rh Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.328, year: 1999

Air Leakage Rates in Typical Air Barrier Assemblies

Energy Technology Data Exchange (ETDEWEB)

Hun, Diana E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Atchley, Jerald Allen [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Childs, Phillip W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-11-01

Estimates for 2010 indicate that infiltration in residential buildings was responsible for 2.85 quads of energy (DOE 2014), which is about 3% of the total energy consumed in the US. One of the mechanisms being implemented to reduce this energy penalty is the use of air barriers as part of the building envelope. These technologies decrease airflow through major leakage sites such as oriented strand board (OSB) joints, and gaps around penetrations (e.g., windows, doors, pipes, electrical outlets) as indicated by Hun et al. (2014). However, most air barrier materials do not properly address leakage spots such as wall-to-roof joints and wall-to-foundation joints because these are difficult to seal, and because air barrier manufacturers usually do not provide adequate instructions for these locations. The present study focuses on characterizing typical air leakage sites in wall assemblies with air barrier materials.

Silicon surface barrier detector and study of energy spectrum of alpha particles from radioactive source

International Nuclear Information System (INIS)

Verma, S.D.; Sinha, Vijaya

1986-01-01

The principles of working of three commonly used radiation detectors, namely ionization chambers, scintillation counters with photomultiplier tube (PMT) systems and semiconductor detectors are briefly discussed. Out of the semiconductor detectors, the silicon surface barrier (SSB) detector has distinct advantages for detection of radiations, alpha particles in particular. The experimental setup to obtain the energy spectrum of alpha particles from 241 Am source using SSB fabricated in the Physics Department of Gujarat University, Ahmedabad is described. Its performance is compared with scintillation counter using PMT. SSB detector shows a sharp peak of #approx # 3 per cent energy resolution. The factors affecting the peak, namely, electronic noise, source dependent factors and detector-dependent factors are discussed. A method of calibrating SSB detectors based on energy loss mechanism of alpha particles in thin absorbers is described. Applications of such detectors are indicated. (M.G.B.)

Transport Barriers in Bootstrap Driven Tokamaks

Science.gov (United States)

Staebler, Gary

2017-10-01

Maximizing the bootstrap current in a tokamak, so that it drives a high fraction of the total current, reduces the external power required to drive current by other means. Improved energy confinement, relative to empirical scaling laws, enables a reactor to more fully take advantage of the bootstrap driven tokamak. Experiments have demonstrated improved energy confinement due to the spontaneous formation of an internal transport barrier in high bootstrap fraction discharges. Gyrokinetic analysis, and quasilinear predictive modeling, demonstrates that the observed transport barrier is due to the suppression of turbulence primarily due to the large Shafranov shift. ExB velocity shear does not play a significant role in the transport barrier due to the high safety factor. It will be shown, that the Shafranov shift can produce a bifurcation to improved confinement in regions of positive magnetic shear or a continuous reduction in transport for weak or negative magnetic shear. Operation at high safety factor lowers the pressure gradient threshold for the Shafranov shift driven barrier formation. The ion energy transport is reduced to neoclassical and electron energy and particle transport is reduced, but still turbulent, within the barrier. Deeper into the plasma, very large levels of electron transport are observed. The observed electron temperature profile is shown to be close to the threshold for the electron temperature gradient (ETG) mode. A large ETG driven energy transport is qualitatively consistent with recent multi-scale gyrokinetic simulations showing that reducing the ion scale turbulence can lead to large increase in the electron scale transport. A new saturation model for the quasilinear TGLF transport code, that fits these multi-scale gyrokinetic simulations, can match the data if the impact of zonal flow mixing on the ETG modes is reduced at high safety factor. This work was supported by the U.S. Department of Energy under DE-FG02-95ER54309 and DE-FC02