WorldWideScience

Sample records for monitor opm experiment

  1. Science Data Report for the Optical Properties Monitor (OPM) Experiment

    Science.gov (United States)

    Wilkes, D. R.; Zwiener, J. M.; Carruth, Ralph (Technical Monitor)

    2001-01-01

    This science data report describes the Optical Properties Monitor (OPM) experiment and the data gathered during its 9-mo exposure on the Mir space station. Three independent optical instruments made up OPM: an integrating sphere spectral reflectometer, vacuum ultraviolet spectrometer, and a total integrated scatter instrument. Selected materials were exposed to the low-Earth orbit, and their performance monitored in situ by the OPM instruments. Coinvestigators from four NASA Centers, five International Space Station contractors, one university, two Department of Defense organizations, and the Russian space company, Energia, contributed samples to this experiment. These materials included a number of thermal control coatings, optical materials, polymeric films, nanocomposites, and other state-of-the-art materials. Degradation of some materials, including aluminum conversion coatings and Beta cloth, was greater than expected. The OPM experiment was launched aboard the Space Shuttle on mission STS-81 in January 1997 and transferred to the Mir space station. An extravehicular activity (EVA) was performed in April 1997 to attach the OPM experiment to the outside of the Mir/Shuttle Docking Module for space environment exposure. OPM was retrieved during an EVA in January 1998 and was returned to Earth on board the Space Shuttle on mission STS-89.

  2. Office of Personnel Management (OPM)

    Data.gov (United States)

    Social Security Administration — The purpose of this agreement is for SSA to verify SSN information for the Office of Personnel Management. OPM will use the SSN verifications in its investigative...

  3. 5 CFR 430.210 - OPM responsibilities.

    Science.gov (United States)

    2010-01-01

    ... MANAGEMENT Performance Appraisal for General Schedule, Prevailing Rate, and Certain Other Employees § 430.210 OPM responsibilities. (a) OPM shall review and approve an agency's performance appraisal system(s). (b) OPM may evaluate the operation and application of an agency's performance appraisal system(s)...

  4. 5 CFR 960.106 - OPM leadership.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false OPM leadership. 960.106 Section 960.106 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EXECUTIVE BOARDS § 960.106 OPM leadership. (a) Role of the Director. The Director is responsible to...

  5. Office of Personnel Management (OPM) Earnings

    Data.gov (United States)

    Social Security Administration — Each year the Office of Personnel Management (OPM) sends SSA a file to be verified and matched against the Master Earnings File (MEF) and Employer Information File...

  6. 5 CFR 591.225 - Which CPIs does OPM use?

    Science.gov (United States)

    2010-01-01

    ... Allowances § 591.225 Which CPIs does OPM use? OPM uses the following CPIs: (a) For the Washington, DC, area—the BLS Consumer Price Index, All Urban Consumers (CPI-U); (b) For all COLA areas in the State of... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Which CPIs does OPM use? 591.225...

  7. Nærvær som opmærksomhedskultur

    DEFF Research Database (Denmark)

    Nielsen, Anne Maj

    2010-01-01

    Artiklen præsenterer eksempler og teori om opmærksomhedsudvikling og argumenterer for, at begrebet om forskellige opmærksomhedskulturer kan anvendes til at differentiere pædagogiske indsatser med henblik på at fremme forskellige former for opmærksomhedsudvikling....

  8. Flow, opmærksomhed og relationer

    DEFF Research Database (Denmark)

    Andersen, Frans Ørsted; Kristensen, Rene

    Bogen redegør for flowteori, selvpsykologi og grundlæggende neurologisk forståelse af læring i et let tilgængeligt fagsprog. Der er tilknyttet et arbejdshæfte til pædagogisk udredning af flow, opmærksomhed og hukommelse....

  9. 5 CFR 9901.105 - OPM coordination and approval.

    Science.gov (United States)

    2010-01-01

    ... intended as an internal DoD/OPM matter to recognize the Secretary's special authority to direct the... applicable premium pay limitations, as authorized under § 9901.362(a)(2); (3) Determining pay bands for which... categories under § 9901.362(i)(3). (d) When a matter requiring OPM coordination is submitted to the...

  10. Experiences on MIC monitoring by electrochemical techniques

    DEFF Research Database (Denmark)

    Cristiani, P.; Perboni, G.; Hilbert, Lisbeth Rischel;

    2002-01-01

    Some results of practical experiences on the performances of electrochemical and electric MIC monitoring techniques, coming from the discussion in the Brite-Euram thematic network "MIC of industrial materials", are presented in this paper.......Some results of practical experiences on the performances of electrochemical and electric MIC monitoring techniques, coming from the discussion in the Brite-Euram thematic network "MIC of industrial materials", are presented in this paper....

  11. Radiation Monitoring Equipment Dosimeter Experiment

    Science.gov (United States)

    Hardy, Kenneth A.; Golightly, Michael J.; Quam, William

    1992-01-01

    Spacecraft crews risk exposure to relatively high levels of ionizing radiation. This radiation may come from charged particles trapped in the Earth's magnetic fields, charged particles released by solar flare activity, galactic cosmic radiation, energetic photons and neutrons generated by interaction of these primary radiations with spacecraft and crew, and man-made sources (e.g., nuclear power generators). As missions are directed to higher radiation level orbits, viz., higher altitudes and inclinations, longer durations, and increased flight frequency, radiation exposure could well become a major factor for crew stay time and career lengths. To more accurately define the radiological exposure and risk to the crew, real-time radiation monitoring instrumentation, which is capable of identifying and measuring the various radiation components, must be flown. This presentation describes a radiation dosimeter instrument which was successfully flown on the Space Shuttle, the RME-3.

  12. Calibration Monitor for Dark Energy Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, M. E.

    2009-11-23

    The goal of this program was to design, build, test, and characterize a flight qualified calibration source and monitor for a Dark Energy related experiment: ACCESS - 'Absolute Color Calibration Experiment for Standard Stars'. This calibration source, the On-board Calibration Monitor (OCM), is a key component of our ACCESS spectrophotometric calibration program. The OCM will be flown as part of the ACCESS sub-orbital rocket payload in addition to monitoring instrument sensitivity on the ground. The objective of the OCM is to minimize systematic errors associated with any potential changes in the ACCESS instrument sensitivity. Importantly, the OCM will be used to monitor instrument sensitivity immediately after astronomical observations while the instrument payload is parachuting to the ground. Through monitoring, we can detect, track, characterize, and thus correct for any changes in instrument senstivity over the proposed 5-year duration of the assembled and calibrated instrument.

  13. 5 CFR 591.224 - How does OPM adjust price indexes between surveys?

    Science.gov (United States)

    2010-01-01

    ... this, OPM uses the annual or biennial change in the Consumer Price Index (CPI) for the COLA area... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false How does OPM adjust price indexes between...-Of-Living Allowances § 591.224 How does OPM adjust price indexes between surveys? (a) OPM...

  14. 5 CFR 591.213 - What prices does OPM collect?

    Science.gov (United States)

    2010-01-01

    ... items, such as health insurance and K-12 education, based on employee usage of the item. For example, OPM estimates health insurance prices based on the employee's share of the premium costs and...

  15. N-16 monitors: Almaraz NPP experience

    Energy Technology Data Exchange (ETDEWEB)

    Adrada, J. [Almaraz NPP, Madrid (Spain)

    1997-02-01

    Almaraz Nuclear Power Plant has installed N-16 monitors - one per steam generator - to control the leakage rate through the steam generator tubes after the application of leak before break (LBB) criteria for the top tube sheet (TTS). After several years of operation with the N-16 monitors, Almaraz NPP experience may be summarized as follows: N-16 monitors are very useful to follow the steam generator leak rate trend and to detect an incipient tube rupture; but they do not provide an exact absolute leak rate value, mainly when there are small leaks. The evolution of the measured N-16 leak rates varies along the fuel cycle, with the same trend for the 3 steam generators. This behaviour is associated with the primary water chemistry evolution along the cycle.

  16. OPM Scheme Editor 2: A graphical editor for specifying object-protocol structures

    Energy Technology Data Exchange (ETDEWEB)

    Chen, I-Min A.; Markowitz, V.M.; Pang, F.; Ben-Shachar, O.

    1993-07-01

    This document describes an X-window based Schema Editor for the Object-Protocol Model (OPM). OPM is a data model that supports the specification of complex object and protocol classes. objects and protocols are qualified in OPM by attributes that are defined over (associated with) value classes. Connections of object and protocol classes are expressed in OPM via attributes. OPM supports the specification (expansion) of protocols in terms of alternative and sequences of component (sub) protocols. The OPM Schema Editor allows specifying, displaying, modifying, and browsing through OPM schemas. The OPM Schema Editor generates an output file that can be used as input to an OPM schema translation tool that maps OPM schemas into definitions for relational database management systems. The OPM Schema Editor was implemented using C++ and the X11 based Motif toolkit, on Sun SPARCstation under Sun Unix OS 4.1. This document consists of the following parts: (1) A tutorial consisting of seven introductory lessons for the OPM Schema Editor. (2) A reference manual describing all the windows and functions of the OPM Schema Editor. (3) An appendix with an overview of OPM.

  17. 76 FR 62096 - Revision of Information Collection: OPM Online Form 1417

    Science.gov (United States)

    2011-10-06

    ... MANAGEMENT Revision of Information Collection: OPM Online Form 1417 AGENCY: Office of Personnel Management... an information collection. OPM Online Form 1417, the Combined Federal Campaign (CFC) Information... contact information. The proposed revisions remove data that is collected from other sources...

  18. Afrapportering af projekt matematisk opmærksomhed i daginstitutionen

    DEFF Research Database (Denmark)

    Storgaard, Frank

    2017-01-01

    Med udgangspunkt i det norske projekt MIO og det danske projekt ”Tidlig matematisk opmærksomhed fra Navimat,” har projektet haft to formål. Det ene formål har været at klæde pædagogerne på til at være opmærksomme på, hvornår børnene i daginstitutionen var aktive med før-matematiske handlinger...

  19. 5 CFR 294.106 - Handbook of Publications, Periodicals, and OPM Issuances.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Handbook of Publications, Periodicals... Under the Freedom of Information Act § 294.106 Handbook of Publications, Periodicals, and OPM Issuances. (a)(1) Annually, OPM publishes OPM-AG-PSD-01, “Handbook of Publications, Periodicals, and Issuances...

  20. 5 CFR 591.220 - How does OPM calculate energy utility cost indexes?

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false How does OPM calculate energy utility... Areas Cost-Of-Living Allowances § 591.220 How does OPM calculate energy utility cost indexes? (a) OPM calculates energy utility cost indexes based on the relative cost of maintaining a standard size dwelling...

  1. 76 FR 50769 - Submission for Review: Application for Senior Administrative Law Judge (OPM Form 1655), and...

    Science.gov (United States)

    2011-08-16

    ... MANAGEMENT Submission for Review: Application for Senior Administrative Law Judge (OPM Form 1655), and Geographic Preference Statement for Senior Administrative Law Judge Applicant (OPM Form 1655-A) AGENCY: U.S..., and OPM 1655-A. These forms are used by retired Administrative Law Judges seeking ] reemployment on...

  2. 5 CFR 295.202 - Factors OPM will consider.

    Science.gov (United States)

    2010-01-01

    ... Section 295.202 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS... PROCEEDINGS Requests for Testimony and Production of Documents § 295.202 Factors OPM will consider. The... documents that were produced by another agency; (m) A substantial Government interest is implicated; (n)...

  3. Data Quality Monitoring Display for ATLAS experiment

    CERN Document Server

    Ilchenko, Y; The ATLAS collaboration; Corso-Radu, A; Hadavand, H; Kolos, S; Slagle, K; Taffard, A

    2009-01-01

    The start of collisions at the LHC brings with it much excitement and many unknowns. It’s essential at this point in the experiment to be prepared with user-friendly tools to quickly and efficiently determine the quality of the data. Easy visualization of data for the shift crew and experts is one of the key factors in the data quality assessment process. The Data Quality Monitoring Display (DQMD) is a visualization tool for the automatic data quality assessment of the ATLAS experiment. It is the interface through which the shift crew and experts can validate the quality of the data being recorded or processed, be warned of problems related to data quality, and identify the origin of such problems. This tool allows great flexibility for visualization of results from automatic histogram checking through custom algorithms, the configuration used to run the algorithms, and histograms used for the check, with an overlay of reference histograms when applicable. The display also supports visualization of the resu...

  4. Experiences in home-based growth monitoring.

    Science.gov (United States)

    Suelan, F; Briones, H

    1992-01-01

    A growth monitoring project (GMP) of child weighing was implemented by the Philippines' Department of Health (DOH) through the Integrated Provincial Health Office to monitor either children's nutritional progress or their faltering of growth. Weaknesses, however, were found in the GMP. For example, only 31% of preschoolers included in the Nutrition Center of the Philippines (NCP) survey had growth charts. An 1990 UNICEF-DOH survey also found that the growth chart was used primarily by mothers and service providers to record infant immunization. Mothers brought their children to well-baby clinics in barangay health centers only when their children were sick. Conducted only once per year, weighing was not perceived as a tool in detecting and preventing sickness, and ensuring normal growth. Asked to help improve the GMP, the NCP consulted intended beneficiaries and cooperators to develop a plan to pilot an intensive monitoring project in four towns of Negros Occidental, starting in January 1991 and ending in December 1992. The resultant Home-Based Growth Monitoring (HBGM) project would place emphasis upon enabling rural mothers to become self-sustaining agents for child growth monitoring. A key feature was the establishment of a weighing post in a strategic place for every 2-3 family clusters. The HBGM project was piloted in 1991 in Calatrava, Toboso, Cauayan, and Sipalay. This paper describes project implementation, problems and solutions, and results.

  5. The run control and monitoring system of the CMS experiment

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Gerry; /MIT; Boyer, Vincent; /CERN; Branson, James; /UCLA; Brett, Angela; Cano, Eric; Carboni, Andrea; Ciganek, Marek; Cittolin, Sergio; /CERN; O' Dell, Vivian; /Fermilab; Erhan, Samim; /CERN /UC, San Diego; Gigi, Dominique; /CERN /Kyungpook Natl. U. /MIT /UCLA /CERN /INFN, Legnaro

    2007-10-01

    The CMS experiment at the LHC at CERN will start taking data in 2008. To configure, control and monitor the experiment during data-taking the Run Control and Monitoring System (RCMS) was developed. This paper describes the architecture and the technology used to implement the RCMS, as well as the deployment and commissioning strategy of this important component of the online software for the CMS experiment.

  6. Operating experience review of an INL gas monitoring system

    Energy Technology Data Exchange (ETDEWEB)

    Cadwallader, Lee C. [Idaho National Lab. (INL), Idaho Falls, ID (United States); DeWall, K. G. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Herring, J. S. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-03-12

    This article describes the operations of several types of gas monitors in use at the Idaho National Laboratory (INL) High Temperature Electrolysis Experiment (HTE) laboratory. The gases monitored in the lab room are hydrogen, carbon monoxide, carbon dioxide, and oxygen. The operating time, calibration, and both actual and unwanted alarms are described. The calibration session time durations are described. In addition, some simple calculations are given to estimate the reliability of these monitors and the results are compared to operating experiences of other types of monitors.

  7. Operating Experiences of a Loss of Voltage Monitoring Program

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eun-Chan [Korea Hydro and Nuclear Power Co. Ltd., Daejeon (Korea, Republic of)

    2015-10-15

    Loss of voltage (LOV) events continue to occur due to inadequate work management and random human errors. On February 26, 2015, regulators analyzed the root causes of LOV events and presented the results for the nuclear industry. Currently, KHNP uses a risk monitoring program, which is named 'LOV Monitor', for LOV prevention during pilot plant outages. This review introduces the operation experiences of LOV Monitor based on the evaluation results of a real event. The operation experiences of LOV Monitor in the pilot plants confirmed that this program could detect and reduce LOV possibilities from scheduling errors such as the simultaneous maintenance of energized trains and de-energized trains considering the physical conditions of the power circuit breakers. However, a maintenance culture that heeds the risk monitoring result must be strengthened in order to obtain substantial effects through applying LOV Monitor to the outage.

  8. 5 CFR 10.3 - OPM authority to review personnel management programs and practices.

    Science.gov (United States)

    2010-01-01

    ... management programs and practices. 10.3 Section 10.3 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE RULES AGENCY ACCOUNTABILITY SYSTEMS; OPM AUTHORITY TO REVIEW PERSONNEL MANAGEMENT PROGRAMS (RULE X) § 10.3 OPM authority to review personnel management programs and practices. The Office of...

  9. One-pot multienzyme (OPME) systems for chemoenzymatic synthesis of carbohydrates.

    Science.gov (United States)

    Yu, Hai; Chen, Xi

    2016-03-14

    Glycosyltransferase-catalyzed enzymatic and chemoenzymatic syntheses are powerful approaches for the production of oligosaccharides, polysaccharides, glycoconjugates, and their derivatives. Enzymes involved in the biosynthesis of sugar nucleotide donors can be combined with glycosyltransferases in one pot for efficient production of the target glycans from simple monosaccharides and acceptors. The identification of enzymes involved in the salvage pathway of sugar nucleotide generation has greatly facilitated the development of simplified and efficient one-pot multienzyme (OPME) systems for synthesizing major glycan epitopes in mammalian glycomes. The applications of OPME methods are steadily gaining popularity mainly due to the increasing availability of wild-type and engineered enzymes. Substrate promiscuity of these enzymes and their mutants allows OPME synthesis of carbohydrates with naturally occurring post-glycosylational modifications (PGMs) and their non-natural derivatives using modified monosaccharides as precursors. The OPME systems can be applied in sequence for synthesizing complex carbohydrates. The sequence of the sequential OPME processes, the glycosyltransferase used, and the substrate specificities of the glycosyltransferases define the structures of the products. The OPME and sequential OPME strategies can be extended to diverse glycans in other glycomes when suitable enzymes with substrate promiscuity become available. This Perspective summarizes the work of the authors and collaborators on the development of glycosyltransferase-based OPME systems for carbohydrate synthesis. Future directions are also discussed.

  10. 5 CFR 591.208 - How does OPM establish COLA rates?

    Science.gov (United States)

    2010-01-01

    ... differences as indexes. (a) OPM computes price indexes for various categories of consumer expenditures. (b) OPM combines the price indexes using Consumer expenditure weights to produce an overall price index... uses employment weights to combine overall price indexes by survey area for COLA areas. The COLA......

  11. 78 FR 37245 - Submission for Review: OPM Form 1203-FX, Occupational Questionnaire

    Science.gov (United States)

    2013-06-20

    ... MANAGEMENT Submission for Review: OPM Form 1203-FX, Occupational Questionnaire AGENCY: U.S. Office of... Questionnaire, OPM Form 1203-FX. As required by the Paperwork Reduction Act of 1995, (Pub. L. 104-13, 44 U.S.C....gov . SUPPLEMENTARY INFORMATION: The Occupational Questionnaire is an optical scan form designed...

  12. 78 FR 59983 - Submission for Review: OPM Form 1203-FX, Occupational Questionnaire, 3206-0040

    Science.gov (United States)

    2013-09-30

    ... on June 20, 2013 at Volume 78 FR 37245 allowing for a 60-day public comment period. We did not... MANAGEMENT Submission for Review: OPM Form 1203-FX, Occupational Questionnaire, 3206-0040 AGENCY: U.S. Office..., Occupational Questionnaire, OPM Form 1203-FX. As required by the Paperwork Reduction Act of 1995, (Pub. L....

  13. 5 CFR 831.1806 - OPM processing for non-fraud claims.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false OPM processing for non-fraud claims. 831.1806 Section 831.1806 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE... Retirement and Disability Fund § 831.1806 OPM processing for non-fraud claims. (a) Refunds—incomplete debt...

  14. 5 CFR 845.406 - OPM processing for non-fraud claims.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false OPM processing for non-fraud claims. 845.406 Section 845.406 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE... Recovery of a Debt From the Civil Service Retirement Fund § 845.406 OPM processing for non-fraud claims. (a...

  15. 5 CFR 875.107 - What are OPM's responsibilities as regulator under this Program?

    Science.gov (United States)

    2010-01-01

    ... MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL LONG TERM CARE INSURANCE PROGRAM Administration and General Provisions § 875.107 What are OPM's responsibilities as regulator under this Program... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false What are OPM's responsibilities...

  16. 5 CFR 591.222 - How does OPM use the expenditure weights to combine price indexes?

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false How does OPM use the expenditure weights to combine price indexes? 591.222 Section 591.222 Administrative Personnel OFFICE OF PERSONNEL... combine price indexes? OPM uses a three-step process to combine price indexes. (a) Step 1. For each...

  17. 5 CFR 919.635 - May the OPM settle a debarment or suspension action?

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false May the OPM settle a debarment or suspension action? 919.635 Section 919.635 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED... Principles Relating to Suspension and Debarment Actions § 919.635 May the OPM settle a debarment...

  18. 5 CFR 919.630 - May the OPM impute conduct of one person to another?

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false May the OPM impute conduct of one person to another? 919.630 Section 919.630 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT...) General Principles Relating to Suspension and Debarment Actions § 919.630 May the OPM impute conduct...

  19. Experiment Study of Fiber Optic Sensing in Railway Security Monitoring

    Institute of Scientific and Technical Information of China (English)

    Dian Fan; De-Sheng Jiang; Wei-Lai Li

    2008-01-01

    Aiming at some security problems in railway running and the application condition of existing technology, this paper studies some issues of using fiber optic sensing technology in railway security monitoring. Through field experiment measuring the strain of the rail and analyzing the experiment data, the method of diagnosing the health condition of rail and wheel is investigated.

  20. Strategies for experiment-specific monitoring in the Grid

    CERN Document Server

    Mendez Lorenzo, Patricia; Campana, Simone; Santinelli, Roberto; Lanciotti, Elisa; Miccio, Enzo; Magini, Nicolo; Di Girolamo, Alessandro

    2008-01-01

    This contribution describes how the LHC experiments implement their own Grid resource monitoring, either by internally developed tools, or by reusing tools used for Grid operations, like the Service Availability Monitor (SAM) used for the EGEE operations. The LHC experiments perform most, if not all, of their computing activities on Grid resources. This requires an accurate and updated picture of the status of the Grid services used by them, and of the services which are specific to the experiment. To achieve this, a common method is to periodically execute tests on the services, where the functionalities tested may be different from a VO to another. The SAM framework, developed for the EGEE operations, can be easily used to run and publish the results of arbitrary tests, from basic functionality tests, to high-level operations from real production activities. This contribution describes in detail how the monitoring system of each LHC experiment has taken advantage of SAM. The work covered by this contributio...

  1. Trigger Menu-aware Monitoring for the ATLAS experiment

    CERN Document Server

    Hoad, Xanthe; The ATLAS collaboration

    2017-01-01

    Changes in the trigger menu, the online algorithmic event-selection of the ATLAS experiment at the LHC, are followed by adjustments to the ATLAS trigger monitoring systems. During Run 1, and so far in Run 2, ATLAS has deployed monitoring updates with the installation of new software releases at Tier-0, the first level of the ATLAS computing grid. Having to wait for a new software release to be installed at Tier-0, in order to update ATLAS offline trigger monitoring configurations, results in a lag with respect to the modification of the trigger menu. We present the design and implementation of a `trigger menu-aware' monitoring system that aims to simplify the ATLAS operational workflows by allowing monitoring configuration changes to be made at the Tier-0 site by utilising an Oracle SQL database.

  2. Trigger Menu-aware Monitoring for the ATLAS experiment

    CERN Document Server

    Hoad, Xanthe; The ATLAS collaboration

    2016-01-01

    Changes in the trigger menu, the online algorithmic event-selection of the ATLAS experiment at the LHC in response to luminosity and detector changes are followed by adjustments in their monitoring system. This is done to ensure that the collected data is useful, and can be properly reconstructed at Tier-0, the first level of the computing grid. During Run 1, ATLAS deployed monitoring updates with the installation of new software releases at Tier-0. This created unnecessary overhead for developers and operators, and unavoidably led to different releases for the data-taking and the monitoring setup. We present a "trigger menu-aware" monitoring system designed for the ATLAS Run 2 data-taking. The new monitoring system aims to simplify the ATLAS operational workflows, and allows for easy and flexible monitoring configuration changes at the Tier-0 site via an Oracle DB interface. We present the design and the implementation of the menu-aware monitoring, along with lessons from the operational experience of the ne...

  3. Run Control and Monitor System for the CMS Experiment

    CERN Document Server

    Bellato, M; Brigljevic, V; Bruno, G; Cano, E; Cittolin, Sergio; Csilling, Akos; Erhan, S; Gigi, D; Glege, F; Gómez-Reino, Robert; Gulmini, M; Gutleber, J; Jacobs, C; Kozlovszky, Miklos; Larsen, H; Magrans de Abril, Ildefons; Maron, G; Meijers, F; Meschi, E; Murray, S; Oh, A; Orsini, L; Pollet, L; Rácz, A; Rorato, G; Samyn, D; Scharff-Hansen, P; Schwick, C; Sphicas, Paris; Toniolo, N; Ventura, Sandro; Zangrando, L

    2003-01-01

    The Run Control and Monitor System (RCMS) of the CMS experiment is the set of hardware and software components responsible for controlling and monitoring the experiment during data-taking. It provides users with a "virtual counting room", enabling them to operate the experiment and to monitor detector status and data quality from any point in the world. This paper describes the architecture of the RCMS with particular emphasis on its scalability through a distributed collection of nodes arranged in a tree-based hierarchy. The current implementation of the architecture in a prototype RCMS used in test beam setups, detector validations and DAQ demonstrators is documented. A discussion of the key technologies used, including Web Services, and the results of tests performed with a 128-node system are presented.

  4. AGC-3 Experiment Irradiation Monitoring Data Qualification Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Hull, Laurence C. [Idaho National Lab. (INL), Idaho Falls, ID (United States). VHTR Technology Development Office

    2014-08-01

    The Graphite Technology Development Program will run a series of six experiments to quantify the effects of irradiation on nuclear-grade graphite. The third experiment, Advanced Graphite Creep 3 (AGC-3), began with Advanced Test Reactor (ATR) Cycle 152B on November 27, 2012, and ended with ATR Cycle 155B on April 23, 2014. This report documents qualification of AGC-3 experiment irradiation monitoring data for use by the Very High Temperature Reactor (VHTR) Technology Development Office (TDO) Program for research and development activities required to design and license the first VHTR nuclear plant. Qualified data meet the requirements for data collection and use as described in the experiment planning and quality assurance documents. Failed data do not meet the requirements. Trend data may not meet the requirements, but may still provide some useable information. The report documents qualification of AGC-3 experiment irradiation monitoring data following MCP-2691. This report also documents whether AGC-3 experiment irradiation monitoring data meet the requirements for data collection as specified in technical and functional requirements documents and quality assurance (QA) plans. Data handling is described showing how data are passed from the data collection experiment to the Nuclear Data Management and Analysis System (NDMAS) team. The data structure is described, including data batches, components, attributes, and response variables. The description of the approach to data qualification includes the steps taken to qualify the data and the specific tests used to verify that the data meet requirements. Finally, the current status of the data received by NDMAS from the AGC-3 experiment is presented with summarized information on test results and resolutions. This report addresses all of the irradiation monitoring data collected during the AGC-3 experiment.

  5. The Radon Monitoring System in Daya Bay Reactor Neutrino Experiment

    CERN Document Server

    Chu, M C; Kwok, M W; Kwok, T; Leung, J K C; Leung, K Y; Lin, Y C; Luk, K B; Pun, C S J

    2016-01-01

    We developed a highly sensitive, reliable and portable automatic system (H$^{3}$) to monitor the radon concentration of the underground experimental halls of the Daya Bay Reactor Neutrino Experiment. H$^{3}$ is able to measure radon concentration with a statistical error less than 10\\% in a 1-hour measurement of dehumidified air (R.H. 5\\% at 25$^{\\circ}$C) with radon concentration as low as 50 Bq/m$^{3}$. This is achieved by using a large radon progeny collection chamber, semiconductor $\\alpha$-particle detector with high energy resolution, improved electronics and software. The integrated radon monitoring system is highly customizable to operate in different run modes at scheduled times and can be controlled remotely to sample radon in ambient air or in water from the water pools where the antineutrino detectors are being housed. The radon monitoring system has been running in the three experimental halls of the Daya Bay Reactor Neutrino Experiment since November 2013.

  6. Online Monitoring software framework in the ATLAS experiment

    CERN Document Server

    Barczyk, M.; Caprini, M.; Da Silva Conceicao, J.; Dobson, M.; Flammer, J.; Jones, R.; Kazarov, A.; Kolos, S.; Liko, D.; Lucio, L.; Mapelli, L.; Soloviev, I.; Hart, R.; Amorim, A.; Klose, D.; Lima, J.; Pedro, L.; Wolters, H.; Badescu, E.; Alexandrov, I.; Kotov, V.; Mineev, M.; Ryabov, Yu.; CHEP 2003 Computing in High Energy Physics; Ryabov, Yu.

    2003-01-01

    A fast, efficient and comprehensive monitoring system is a vital part of any HEP experiment. This paper describes the software framework that will be used during ATLAS data taking to monitor the state of the data acquisition and the quality of physics data in the experiment. The framework has been implemented by the Online Software group of the ATLAS Trigger&Data Acquisition (TDAQ) project and has already been used for several years in the ATLAS test beams at CERN. The inter-process communication in the framework is implemented via CORBA, which provides portability between different operating systems and programming languages. This paper will describe the design and the most important aspects of the online monitoring framework implementation. It will also show some test results, which indicate the performance and scalability of the current implementation.

  7. A controlled experiment for water front monitoring using GPR technology

    NARCIS (Netherlands)

    Miorali, M.; Slob, E.C.; Arts, R.J.

    2010-01-01

    We use a stepped frequency continuous wave (SFCW) radar and an impulse radar to monitor a water flood experiment in a sand box. The SFCW system operates in the bandwidth from 800 MHz to 2.8 GHz. The impulse radar system is bi-static and works with a central frequency of 1 GHz. The sand box is a mete

  8. A controlled experiment for water front monitoring using GPR technology

    NARCIS (Netherlands)

    Miorali, M.; Slob, E.C.; Arts, R.J.

    2010-01-01

    We use a stepped frequency continuous wave (SFCW) radar and an impulse radar to monitor a water flood experiment in a sand box. The SFCW system operates in the bandwidth from 800 MHz to 2.8 GHz. The impulse radar system is bi-static and works with a central frequency of 1 GHz. The sand box is a

  9. 5 CFR 591.244 - How does OPM select COLA Advisory Committee members?

    Science.gov (United States)

    2010-01-01

    ... SERVICE REGULATIONS ALLOWANCES AND DIFFERENTIALS Cost-of-Living Allowance and Post Differential-Nonforeign Areas Program Administration § 591.244 How does OPM select COLA Advisory Committee members? (a)...

  10. 5 CFR 591.217 - In which outlets does OPM collect prices?

    Science.gov (United States)

    2010-01-01

    ... data collection areas, accessibility by road, physical size, advertising, and other characteristics that reflect sales volume. To the extent practical, OPM prices like items in the same types of...

  11. Office of Personnel Management (OPM) / Master Beneficiary Record (MBR) Medicare Match

    Data.gov (United States)

    Social Security Administration — The purpose of this exchange of information is to assist OPM in identifying the number of CSRS and FERS annuitants, their spouses, and survivor annuitants who are...

  12. Training-based Channel Estimation for Signal Equalization and OPM in 16-QAM Optical Transmission Systems

    DEFF Research Database (Denmark)

    Pittalà, Fabio; Hauske, Fabian N.; Ye, Yabin;

    2012-01-01

    Efficient channel estimation for signal equalization and OPM based on short CAZAC sequences with QPSK and 8PSK constellation formats is demonstrated in a 224-Gb/s PDM 16-QAM optical linear transmission system....

  13. Har automatisering betydning for bilisters opmærksomhed og mentale belastning?

    DEFF Research Database (Denmark)

    Møller, Mette

    2015-01-01

    Det er mindre mentalt krævende at køre i en automatiseret bil. I nogle situationer bidrager det til, at bilisten er ekstra opmærksom, mens det i andre fører til, at bilisten er mindre opmærksom og dermed er mindre klar til at reagere i en kritisk situation. Der er dog fortsat mange uafklarede...

  14. A high arctic experience of uniting research and monitoring

    Science.gov (United States)

    Schmidt, Niels Martin; Christensen, Torben R.; Roslin, Tomas

    2017-07-01

    Monitoring is science keeping our thumb on the pulse of the environment to detect any changes of concern for societies. Basic science is the question-driven search for fundamental processes and mechanisms. Given the firm root of monitoring in human interests and needs, basic sciences have often been regarded as scientifically "purer"—particularly within university-based research communities. We argue that the dichotomy between "research" and "monitoring" is an artificial one, and that this artificial split clouds the definition of scientific goals and leads to suboptimal use of resources. We claim that the synergy between the two scientific approaches is well distilled by science conducted under extreme logistic constraints, when scientists are forced to take full advantage of both the data and the infrastructure available. In evidence of this view, we present our experiences from two decades of uniting research and monitoring at the remote research facility Zackenberg in High Arctic Greenland. For this site, we show how the combination of insights from monitoring with the mechanistic understanding obtained from basic research has yielded the most complete understanding of the system—to the benefit of all, and as an example to follow. We therefore urge scientists from across the continuum from monitoring to research to come together, to disregard old division lines, and to work together to expose a comprehensive picture of ecosystem change and its consequences.

  15. A data quality monitoring software framework for the BESⅢ experiment

    Institute of Scientific and Technical Information of China (English)

    HU Ji-Feng; ZHENG Yang-Heng; SUN Xiao-Dong; JI Xiao-Bin

    2012-01-01

    Data quality monitoring (DQM) plays an important role in data taking at the BESⅢ experiments.DQM is used to monitor detector status and data quality.A DQM framework (DQMF) has been developed to make it possible to reuse the BESⅢ offline reconstruction system in the online environment.In this framework,the DQMF can also simulate a virtual data taking environment,transfer events to the event display,publish histograms to a histogram presenter in a fixed interval,and dump histograms into a ROOT file.The DQMF has been stably running throughout BESⅢ data taking.

  16. The CMS Data Quality Monitoring software experience and future improvements

    CERN Document Server

    De Guio, Federico

    2013-01-01

    The Data Quality Monitoring (DQM) Software proved to be a central tool in the CMS experiment. Its flexibility allowed its integration in several environments Online, for real-time detector monitoring; Offline, for the final, fine-grained Data Certification; Release Validation, to constantly validate the functionality and the performance of the reconstruction software; in Monte Carlo productions. The central tool to deliver Data Quality information is a web site for browsing data quality histograms (DQM GUI). In this contribution the usage of the DQM Software in the different environments and its integration in the CMS Reconstruction Software Framework and in all production workflows are presented.

  17. ONKALO POSE experiment. Phase 1 and 2: execution and monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, E. [Saanio and Riekkola Oy, Helsinki (Finland); Siren, T. [Posiva Oy, Helsinki (Finland); Hakala, M. [KMS-Hakala Oy, Nokia (Finland); Kantia, P. [Geofcon Oy, Rovaniemi (Finland)

    2014-02-15

    Posiva has conducted in the ONKALO rock characterisation facility during 2010 - 2011 an in situ experiment named POSE (Posiva's Olkiluoto Spalling Experiment). The POSE experiment had three objectives: to establish the in situ spalling/damage strength of Olkiluoto migmatitic gneiss, to establish the state of in situ stress at the -345 m depth level, and to act as a Prediction-Outcome (P-O) exercise. The POSE experiment consisted of drilling with full-face boring machine two near fullscale deposition holes, diameter 1.52 m (compared to 1.75 m for the actual deposition holes), to a depth of 7.2 m, leaving a 0.9 m pillar between the holes. The holes were planned to be located in such way that maximum excavation-induced stresses could act in the pillar and damage could then take place. Boring of the two holes in 2010 was called Phase 1 (Pillar test). This was followed in 2011 by Phase 2 (Pillar heating test) where four heaters with a length of 7.5 m heated the test area to increase the stresses around the experimental holes. In the heating phase the other hole was back-filled with sand. The test was extensively monitored during the execution using temperature monitoring, strain gauge monitoring, video monitoring, microseismic monitoring and pressure monitoring. In addition, the holes were after the test measured using ground penetration radar (GPR) and 3D photogrammetry for detailed modelling. The outcomes from the test showed that no damage, except for three opened/sheared fractures, was noticed during the boring of the holes (Phase 1). Surface damage was, though, induced by heating (Phase 2). The damage was well localized around the holes and controlled by the foliation (mica rich layers) and rock type contacts which were known to be relatively weak. Surface type failures were not observed in the gneiss, but it was noticed in limited areas in the pegmatite-granite. The depths of the damaged areas due to heating were less than 100 mm. The depths and sizes of the

  18. Experimental Adaptive Digital Performance Monitoring for Optical DP-QPSK Coherent Receiver

    DEFF Research Database (Denmark)

    Borkowski, Robert; Zhang, Xu; Zibar, Darko;

    2011-01-01

    We report on a successful experimental demonstration of a digital optical performance monitoring (OPM) yielding satisfactory estimation accuracy along with adaptive impairment equalization. No observable penalty is measured when equalizer is driven by monitoring module....

  19. The Beam Conditions Monitor of the LHCb Experiment

    CERN Document Server

    Ilgner, Ch; Lieng, M; Nedos, M; Sauerbrey, J; Schleich, S; Spaan, B; Warda, K; Wishahi, J

    2010-01-01

    The LHCb experiment at the European Organization for Nuclear Research (CERN) is dedicated to precision measurements of CP violation and rare decays of B hadrons. Its most sensitive components are protected by means of a Beam Conditions Monitor (BCM), based on polycrystalline CVD diamond sensors. Its configuration, operation and decision logics to issue or remove the beam permit signal for the Large Hadron Collider (LHC) are described in this paper.

  20. World-wide online monitoring interface of the ATLAS experiment

    CERN Document Server

    Kolos, S; The ATLAS collaboration; Mineev, M; Hauser, R; Salnikov, A

    2014-01-01

    The ATLAS collaboration accounts for more than 3000 members located all over the world. The efficiency of the experiment can be improved allowing system experts not present on site to follow the ATLAS operations in real-time, spotting potential problems which otherwise may remain unattended for a non-negligible time. Taking into account the wide geographical spread of the ATLAS collaboration, the solution of this problem is to have all monitoring information with minimal access latency available world-wide. We have implemented a framework which defines a standard approach for retrieving arbitrary monitoring information from the ATLAS private network via HTTP. An information request is made by specifying one of the predefined URLs with some optional parameters refining data which has to be shipped back in XML format. The framework takes care of receiving, parsing and forwarding such requests to the appropriate plugins. The plugins retrieve the requested data and convert it to XML (or optionally to JSON) format...

  1. Web Based Monitoring in the CMS Experiment at CERN

    Energy Technology Data Exchange (ETDEWEB)

    Badgett, William [Fermilab; Borrello, Laura [Wisconsin U., Madison; Chakaberia, Irakli [Kansas State U.; Gigi, Dominique [CERN; Jo, Young-Kwon [Korea U.; Lopez-Perez, Juan Antonio [Fermilab; Maeshima, Kaori [Fermilab; Maruyama, Sho [Fermilab; Patrick, James [Fermilab; Rapsevicius, Valdas [Florida U.; Soha, Aron [Fermilab; Sulmanas, Balys [Fermilab; Wan, Zongru [Korea U.

    2014-09-03

    The Compact Muon Solenoid (CMS) is a large and complex general purpose experiment at the CERN Large Hadron Collider (LHC), built and maintained by many collaborators from around the world. Efficient operation of the detector requires widespread and timely access to a broad range of monitoring and status information. To this end the Web Based Monitoring (WBM) system was developed to present data to users located anywhere from many underlying heterogeneous sources, from real time messaging systems to relational databases. This system provides the power to combine and correlate data in both graphical and tabular formats of interest to the experimenters, including data such as beam conditions, luminosity, trigger rates, detector conditions, and many others, allowing for flexibility on the user side. This paper describes the WBM system architecture and describes how the system was used during the first major data taking run of the LHC.

  2. Web Based Monitoring in the CMS Experiment at CERN

    CERN Document Server

    Badgett, William; Chakaberia, Irakli; Gigi, Dominique; Jo, Young-Kwon; Lopez-Perez, Juan Antonio; Maeshima, Kaori; Maruyama, Sho; Patrick, James; Rapsevicius, Valdas; Soha, Aron; Sulmanas, Balys; Wan, Zongru

    2014-01-01

    The Compact Muon Solenoid (CMS) is a large and complex general purpose experiment at the CERN Large Hadron Collider (LHC), built and maintained by many collaborators from around the world. Efficient operation of the detector requires widespread and timely access to a broad range of monitoring and status information. To this end the Web Based Monitoring (WBM) system was developed to present data to users located anywhere from many underlying heterogeneous sources, from real time messaging systems to relational databases. This system provides the power to combine and correlate data in both graphical and tabular formats of interest to the experimenters, including data such as beam conditions, luminosity, trigger rates, detector conditions, and many others, allowing for flexibility on the user side. This paper describes the WBM system architecture and describes how the system was used during the first major data taking run of the LHC.

  3. The Web Based Monitoring Project at the CMS Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Lopez-Perez, Juan Antonio [Fermilab; Badgett, William [Fermilab; Behrens, Ulf [DESY; Chakaberia, Irakli [Kansas State U.; Jo, Youngkwon [Korea U.; Maeshima, Kaori; Maruyama, Sho [Fermilab; Patrick, James [Fermilab; Rapsevicius, Valdas [Fermilab; Soha, Aron [Fermilab; Stankevicius, Mantas [Fermilab; Sulmanas, Balys [Fermilab; Toda, Sachiko [Kansas State U.; Wan, Zongru [Kansas State U.

    2016-01-01

    The Compact Muon Solenoid is a large a complex general purpose experiment at the CERN Large Hadron Collider (LHC), built and maintained by many collaborators from around the world. Efficient operation of the detector requires widespread and timely access to a broad range of monitoring and status information. To the end the Web Based Monitoring (WBM) system was developed to present data to users located anywhere from many underlying heterogeneous sources, from real time messaging systems to relational databases. This system provides the power to combine and correlate data in both graphical and tabular formats of interest to the experimenters, including data such as beam conditions, luminosity, trigger rates, detector conditions, and many others, allowing for flexibility on the user’s side. This paper describes the WBM system architecture and describes how the system has been used from the beginning of data taking until now (Run1 and Run 2).

  4. Control and monitoring system for TRT detector in ATLAS experiment

    CERN Document Server

    Hajduk, Z

    2002-01-01

    In this article we present methods and tools for design and construction of the control and monitoring system for a big particle physics experiment taking as an example one of the ATLAS subdetectors. Several requirements has been enumerated which such a system have to meet both by hardware and software. Harsh environmental conditions, difficult if not impossible access and very long exploitation time create conditions where only application of industrial standards allow for serviceability, possibility of fast and easy upgrades and intuitive running of the system by relatively non-experienced staff. (6 refs).

  5. Monitoring system experiments on beam loss at SSRF injector

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Experiments on beam loss by using beam loss monitoring (BLM) system were carried out at Shanghai Synchrotron Radiation Facility (SSRF) injector. This system used highly sensitive and current-integrated Si-photodiode detectors and an Ethernet data acquisition (DAQ) system. The experimental results demonstrate that the Si-photodiode detectors are a useful tool that provides dynamic information on beam loss and investigates problems of machine operation. It also shows that the Si-photodiode BLM system is suitable for pulse-radiation of high-energy accelerators.

  6. Monitoring system experiments on beam loss at SSRF injector

    Science.gov (United States)

    Cai, Jun; Xia, XiaoBin; Xu, XunJiang; Liu, Xin; Xu, JiaQiang; Wang, GuangHong; Zeng, Ming

    2011-12-01

    Experiments on beam loss by using beam loss monitoring (BLM) system were carried out at Shanghai Synchrotron Radiation Facility (SSRF) injector. This system used highly sensitive and current-integrated Si-photodiode detectors and an Ethernet data acquisition (DAQ) system. The experimental results demonstrate that the Si-photodiode detectors are a useful tool that provides dynamic information on beam loss and investigates problems of machine operation. It also shows that the Si-photodiode BLM system is suitable for pulse-radiation of high-energy accelerators.

  7. AGC-3 Experiment Irradiation Monitoring Data Qualification Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Laurence Hull

    2014-10-01

    The Graphite Technology Development Program will run a series of six experiments to quantify the effects of irradiation on nuclear grade graphite. The third experiment, Advanced Graphite Creep 3 (AGC 3), began with Advanced Test Reactor (ATR) Cycle 152B on November 27, 2012, and ended with ATR Cycle 155B on April 23, 2014. This report documents qualification of AGC 3 experiment irradiation monitoring data for use by the Very High Temperature Reactor (VHTR) Technology Development Office (TDO) Program for research and development activities required to design and license the first VHTR nuclear plant. Qualified data meet the requirements for data collection and use as described in the experiment planning and quality assurance documents. Failed data do not meet the requirements. Trend data may not meet the requirements, but may still provide some useable information. All thermocouples (TCs) functioned throughout the AGC 3 experiment. There was one interval between December 18, 2012, and December 20, 2012, where 10 NULL values were reported for various TCs. These NULL values were deleted from the Nuclear Data Management and Analysis System database. All temperature data are Qualified for use by the VHTR TDO Program. Argon, helium, and total gas flow data were within expected ranges and are Qualified for use by the VHTR TDO Program. Total gas flow was approximately 50 sccm through the AGC 3 experiment capsule. Helium gas flow was briefly increased to 100 sccm during ATR shutdowns. At the start of the AGC 3 experiment, moisture in the outflow gas line was stuck at a constant value of 335.6174 ppmv for the first cycle (Cycle 152B). When the AGC 3 experiment capsule was reinstalled in ATR for Cycle 154B, a new moisture filter was installed. Moisture data from Cycle 152B are Failed. All moisture data from the final three cycles (Cycles 154B, 155A, and 155B) are Qualified for use by the VHTR TDO Program.

  8. AGC-3 Experiment Irradiation Monitoring Data Qualification Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Laurence Hull

    2014-10-01

    The Graphite Technology Development Program will run a series of six experiments to quantify the effects of irradiation on nuclear grade graphite. The third experiment, Advanced Graphite Creep 3 (AGC 3), began with Advanced Test Reactor (ATR) Cycle 152B on November 27, 2012, and ended with ATR Cycle 155B on April 23, 2014. This report documents qualification of AGC 3 experiment irradiation monitoring data for use by the Very High Temperature Reactor (VHTR) Technology Development Office (TDO) Program for research and development activities required to design and license the first VHTR nuclear plant. Qualified data meet the requirements for data collection and use as described in the experiment planning and quality assurance documents. Failed data do not meet the requirements. Trend data may not meet the requirements, but may still provide some useable information. All thermocouples (TCs) functioned throughout the AGC 3 experiment. There was one interval between December 18, 2012, and December 20, 2012, where 10 NULL values were reported for various TCs. These NULL values were deleted from the Nuclear Data Management and Analysis System database. All temperature data are Qualified for use by the VHTR TDO Program. Argon, helium, and total gas flow data were within expected ranges and are Qualified for use by the VHTR TDO Program. Total gas flow was approximately 50 sccm through the AGC 3 experiment capsule. Helium gas flow was briefly increased to 100 sccm during ATR shutdowns. At the start of the AGC 3 experiment, moisture in the outflow gas line was stuck at a constant value of 335.6174 ppmv for the first cycle (Cycle 152B). When the AGC 3 experiment capsule was reinstalled in ATR for Cycle 154B, a new moisture filter was installed. Moisture data from Cycle 152B are Failed. All moisture data from the final three cycles (Cycles 154B, 155A, and 155B) are Qualified for use by the VHTR TDO Program.

  9. Wireless sensing experiments for structural vibration monitoring of offshore platform

    Institute of Scientific and Technical Information of China (English)

    Yan YU; Jinping OU

    2008-01-01

    In order to validate the feasibility of applying wireless sensing technique to structural monitoring of offshore platform,the experiment of wireless sensor network on offshore platform is presented in this paper.First,wireless sensor network and its topology structure is put forward,and the design of sensor nodes,base station,communication protocol is discussed according to selfdeveloped wireless sensor network.Second,true offshore platform and its experimental model are introduced.Finally,wireless sensing experiment for offshore platform structure is completed and the analysis of the experimental result is given.The research shows that wireless sensor network applied to offshore platform can reflect the vibration of the structure;the sensor nodes are fixed and removed expediently,which saves the cost of signal line as well as installation time.

  10. ONKALO POSE experiment. Phase 3: acoustic and ultrasonic monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Reyes-Montes, J.; Flynn, W.; Huang, J. [Applied Seismology Consultants, Shrewsbury (United Kingdom)

    2014-01-15

    The objectives of the third phase of the POSE experiment are to determine the in situ state of stress at Olkiluoto and the spalling strength of Olkiluoto rock, by internal heating of the experimental hole (ONK-EH3) using 8 vertically installed heaters. This report presents the results from the Acoustic and ultrasonic monitoring carried out around the third experimental hole of the POSE niche between November 2012 and May 2013. The experiment was monitored using an array of 24 transducers installed along 4 monitoring drillholes and data was automatically acquired and processed using the system installed at the niche by Applied Seismology Consultants in May 2012. Daily ultrasonic surveys were carried out between 14{sup th} November 2012 and 21{sup st} May 2013, monitoring the changes in transmission velocities of P and S-waves with an estimated error of ±2 m x s{sup -1} (ASC, 2013). Changes in transmission velocities closely follow the evolution of the temperature profile in the hole wall. An increase in both P-and S-wave transmission velocities is observed at all depth levels and surveyed raypaths during the heating phase, with the highest changes observed in raypaths skimming the hole surface and depths between 2.33 m and 3.7 m. This observation indicates the closure of in situ and excavation-induced microcracks due to thermal stress. After the heaters were switched off, P-wave velocities show a marked decrease, in all raypaths reaching values below those measured at the start of the monitoring approximately 4 weeks after the heaters were switched off. The highest decrease was observed along raypaths surveying the region skimming the hole wall. This decrease below original background values indicates the induction of rock degradation as microcracking induced through the heating-cooling cycle. Changes in P- and S-wave transmission velocity were used to calculate changes in Young's modulus and Poisson's ratio along the different raypaths and depth levels

  11. Volcanic Monitoring Techniques Applied to Controlled Fragmentation Experiments

    Science.gov (United States)

    Kueppers, U.; Alatorre-Ibarguengoitia, M. A.; Hort, M. K.; Kremers, S.; Meier, K.; Scharff, L.; Scheu, B.; Taddeucci, J.; Dingwell, D. B.

    2010-12-01

    Volcanic eruptions are an inevitable natural threat. The range of eruptive styles is large and short term fluctuations of explosivity or vent position pose a large risk that is not necessarily confined to the immediate vicinity of a volcano. Explosive eruptions rather may also affect aviation, infrastructure and climate, regionally as well as globally. Multiparameter monitoring networks are deployed on many active volcanoes to record signs of magmatic processes and help elucidate the secrets of volcanic phenomena. However, our mechanistic understanding of many processes hiding in recorded signals is still poor. As a direct consequence, a solid interpretation of the state of a volcano is still a challenge. In an attempt to bridge this gap, we combined volcanic monitoring and experimental volcanology. We performed 15 well-monitored, field-based, experiments and fragmented natural rock samples from Colima volcano (Mexico) by rapid decompression. We used cylindrical samples of 60 mm height and 25 mm and 60 mm diameter, respectively, and 25 and 35 vol.% open porosity. The applied pressure range was from 4 to 18 MPa. Using different experimental set-ups, the pressurised volume above the samples ranged from 60 - 170 cm3. The experiments were performed at ambient conditions and at controlled sample porosity and size, confinement geometry, and applied pressure. The experiments have been thoroughly monitored with 1) Doppler Radar (DR), 2) high-speed and high-definition cameras, 3) acoustic and infrasound sensors, 4) pressure transducers, and 5) electrically conducting wires. Our aim was to check for common results achieved by the different approaches and, if so, calibrate state-of-the-art monitoring tools. We present how the velocity of the ejected pyroclasts was measured by and evaluated for the different approaches and how it was affected by the experimental conditions and sample characteristics. We show that all deployed instruments successfully measured the pyroclast

  12. The Joint Experiment for Crop Assessment and Monitoring (JECAM): Update on Multisite Inter-comparison Experiments

    Science.gov (United States)

    Jarvis, I.; Gilliams, S. J. B.; Defourny, P.

    2016-12-01

    Globally there is significant convergence on agricultural monitoring research questions. The focus of interest usually revolves around crop type, crop area estimation and near real time crop condition and yield forecasting. Notwithstanding this convergence, agricultural systems differ significantly throughout the world, reflecting the diversity of ecosystems they are located in. Consequently, a global system of systems for operational monitoring must be based on multiple approaches. Research is required to compare and assess these approaches to identify which are most appropriate for any given location. To this end the Joint Experiments for Crop Assessment and Monitoring (JECAM) was established in 2009 to as a research platform to allow the global agricultural monitoring community to work towards a set of best practices and recommendations for using earth observation data to map, monitor and report on agricultural productivity globally. The JECAM initiative brings together researchers from a large number of globally distributed, well monitored agricultural test sites that cover a range of crop types, cropping systems and climate regimes. The results of JECAM optical inter-comparison research taking place in the Stimulating Innovation for Global Monitoring of Agriculture (SIGMA) project and the Sentinel-2 for Agriculture project will be discussed. The presentation will also highlight upcoming work on a Synthetic Aperture Radar (SAR) inter-comparison study. The outcome of these projects will result in a set of best practices that cover the range of remote sensing monitoring and reporting needs, including satellite data acquisition, pre-processing techniques, information retrieval and ground data validation. These outcomes provide the R&D foundation for GEOGLAM and will help to inform the development of the GEOGLAM system of systems for global agricultural monitoring.

  13. Monitoring of the energy scale in the KATRIN neutrino experiment

    CERN Document Server

    AUTHOR|(CDS)2083282

    The question of the absolute mass scale of neutrinos is of particular interest for particle physics, astrophysics, and cosmology. The KATRIN experiment (KArlsruhe TRItium Neutrino experiment) aims to address the effective electron antineutrino mass from the shape of the tritium $\\beta$-spectrum with an unprecedented sensitivity of 0.2 eV/c$^2$. One of the major systematic effects concerns the experimental energy scale, which has to be stable at the level of only a few parts in a million. For its calibration and monitoring the monoenergetic electrons emitted in the internal conversion of $\\gamma$-transition of the metastable isotope $^{83\\mathrm{m}}$Kr will be extensively applied. The aim of this thesis is to address the problem of KATRIN energy scale distortions and its monitoring in detail. The source of electrons based on $^{83\\mathrm{m}}$Kr embedded in a solid as well as the source based on gaseous $^{83\\mathrm{m}}$Kr are studied. Based on the experimental results an approach for the continuous stability m...

  14. New Developments in Web Based Monitoring at the CMS Experiment

    Science.gov (United States)

    Badgett, William; Chakaberia, Irakli; Lopez-Perez, Juan Antonio; Maeshima, Kaori; Maruyama, Sho; Soha, Aron; Sulmanas, Balys; Wan, Zongru

    2012-12-01

    The rate of performance improvements of the LHC at CERN has had a strong influence on the characteristics of the monitoring tools developed for the experiments. We present some of the latest additions to the suite of Web Based Monitoring services for the CMS experiment, and explore the aspects that address the roughly 20-fold increase in peak instantaneous luminosity over the course of 2011. One of these user-friendly tools allows collaborators to easily view, and make correlations among, accelerator configuration information such as bunch patterns, measured quantities such as intensities, vacuum pressures, and background conditions, as well as derived quantities such as luminosity and the number of simultaneous interactions per beam crossing. An additional tool summarizes the daily, weekly, and yearly luminosity and efficiency. Finally, we discuss a trigger cross section and rate fitting service that uses data from previous runs to validate current running conditions, as well as to serve as a predictive extrapolation tool for developing triggers for higher luminosity running.

  15. Monitoring Building Deformation with InSAR: Experiments and Validation.

    Science.gov (United States)

    Yang, Kui; Yan, Li; Huang, Guoman; Chen, Chu; Wu, Zhengpeng

    2016-12-20

    Synthetic Aperture Radar Interferometry (InSAR) techniques are increasingly applied for monitoring land subsidence. The advantages of InSAR include high accuracy and the ability to cover large areas; nevertheless, research validating the use of InSAR on building deformation is limited. In this paper, we test the monitoring capability of the InSAR in experiments using two landmark buildings; the Bohai Building and the China Theater, located in Tianjin, China. They were selected as real examples to compare InSAR and leveling approaches for building deformation. Ten TerraSAR-X images spanning half a year were used in Permanent Scatterer InSAR processing. These extracted InSAR results were processed considering the diversity in both direction and spatial distribution, and were compared with true leveling values in both Ordinary Least Squares (OLS) regression and measurement of error analyses. The detailed experimental results for the Bohai Building and the China Theater showed a high correlation between InSAR results and the leveling values. At the same time, the two Root Mean Square Error (RMSE) indexes had values of approximately 1 mm. These analyses show that a millimeter level of accuracy can be achieved by means of InSAR technique when measuring building deformation. We discuss the differences in accuracy between OLS regression and measurement of error analyses, and compare the accuracy index of leveling in order to propose InSAR accuracy levels appropriate for monitoring buildings deformation. After assessing the advantages and limitations of InSAR techniques in monitoring buildings, further applications are evaluated.

  16. 5 CFR 591.221 - How does OPM compute the consumer expenditure weights it uses to combine price indexes?

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false How does OPM compute the consumer expenditure weights it uses to combine price indexes? 591.221 Section 591.221 Administrative Personnel OFFICE... the consumer expenditure weights it uses to combine price indexes? OPM uses the following...

  17. 5 CFR 919.615 - How does the OPM notify a person of a suspension or debarment action?

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false How does the OPM notify a person of a suspension or debarment action? 919.615 Section 919.615 Administrative Personnel OFFICE OF PERSONNEL... (NONPROCUREMENT) General Principles Relating to Suspension and Debarment Actions § 919.615 How does the OPM...

  18. Internal monitoring of GBTx emulator using IPbus for CBM experiment

    Science.gov (United States)

    Mandal, Swagata; Zabolotny, Wojciech; Sau, Suman; Chkrabarti, Amlan; Saini, Jogender; Chattopadhyay, Subhasis; Pal, Sushanta Kumar

    2015-09-01

    The Compressed Baryonic Matter (CBM) experiment is a part of the Facility for Antiproton and Ion Research (FAIR) in Darmstadt at GSI. In CBM experiment a precisely time synchronized fault tolerant self-triggered electronics is required for Data Acquisition (DAQ) system in CBM experiments which can support high data rate (up to several TB/s). As a part of the implementation of the DAQ system of Muon Chamber (MUCH) which is one of the important detectors in CBM experiment, a FPGA based Gigabit Transceiver (GBTx) emulator is implemented. Readout chain for MUCH consists of XYTER chips (Front end electronics) which will be directly connected to detector, GBTx emulator, Data Processing Board (DPB) and First level event selector board (FLIB) with backend software interface. GBTx emulator will be connected with the XYTER emulator through LVDS (Low Voltage Differential Signalling) line in the front end and in the back end it is connected with DPB through 4.8 Gbps optical link. IPBus over Ethernet is used for internal monitoring of the registers within the GBTx. In IPbus implementation User Datagram Protocol (UDP) stack is used in transport layer of OSI model so that GBTx can be controlled remotely. A Python script is used at computer side to drive IPbus controller.

  19. GAME: Grb and All-sky Monitor Experiment

    CERN Document Server

    Amati, L; Frontera, F; Labanti, C; Feroci, M; Hudec, R; Gomboc, A; Ruffini, R; Santangelo, A; Vacchi, A; Campana, R; Evangelista, Y; Fuschino, F; Salvaterra, R; Stratta, G; Tagliaferri, G; Guidorzi, C; Rosati, P; Titarchuk, L; Penacchioni, A; Izzo, L; Zampa, N; Rodic, T

    2014-01-01

    We describe the GRB and All-sky Monitor Experiment (GAME) mission submitted by a large international collaboration (Italy, Germany, Czech Repubblic, Slovenia, Brazil) in response to the 2012 ESA call for a small mission opportunity for a launch in 2017 and presently under further investigation for subsequent opportunities. The general scientific objective is to perform measurements of key importance for GRB science and to provide the wide astrophysical community of an advanced X-ray all-sky monitoring system. The proposed payload was based on silicon drift detectors (~1-50 keV), CdZnTe (CZT) detectors (~15-200 keV) and crystal scintillators in phoswich (NaI/CsI) configuration (~20 keV-20 MeV), three well established technologies, for a total weight of ~250 kg and a required power of ~240 W. Such instrumentation allows a unique, unprecedented and very powerful combination of large field of view (3-4 sr), a broad energy energy band extending from ~1 keV up to ~20 MeV, an energy resolution as good as ~300 eV in ...

  20. Accelerated Aging Experiments for Capacitor Health Monitoring and Prognostics

    Science.gov (United States)

    Kulkarni, Chetan S.; Celaya, Jose Ramon; Biswas, Gautam; Goebel, Kai

    2012-01-01

    This paper discusses experimental setups for health monitoring and prognostics of electrolytic capacitors under nominal operation and accelerated aging conditions. Electrolytic capacitors have higher failure rates than other components in electronic systems like power drives, power converters etc. Our current work focuses on developing first-principles-based degradation models for electrolytic capacitors under varying electrical and thermal stress conditions. Prognostics and health management for electronic systems aims to predict the onset of faults, study causes for system degradation, and accurately compute remaining useful life. Accelerated life test methods are often used in prognostics research as a way to model multiple causes and assess the effects of the degradation process through time. It also allows for the identification and study of different failure mechanisms and their relationships under different operating conditions. Experiments are designed for aging of the capacitors such that the degradation pattern induced by the aging can be monitored and analyzed. Experimental setups and data collection methods are presented to demonstrate this approach.

  1. Monitoring of computing resource utilization of the ATLAS experiment

    CERN Document Server

    Rousseau, D; The ATLAS collaboration; Vukotic, I; Aidel, O; Schaffer, RD; Albrand, S

    2012-01-01

    Due to the good performance of the LHC accelerator, the ATLAS experiment has seen higher than anticipated levels for both the event rate and the average number of interactions per bunch crossing. In order to respond to these changing requirements, the current and future usage of CPU, memory and disk resources has to be monitored, understood and acted upon. This requires data collection at a fairly fine level of granularity: the performance of each object written and each algorithm run, as well as a dozen per-job variables, are gathered for the different processing steps of Monte Carlo generation and simulation and the reconstruction of both data and Monte Carlo. We present a system to collect and visualize the data from both the online Tier-0 system and distributed grid production jobs. Around 40 GB of performance data are expected from up to 200k jobs per day, thus making performance optimization of the underlying Oracle database of utmost importance.

  2. Monitoring of computing resource utilization of the ATLAS experiment

    Science.gov (United States)

    Rousseau, David; Dimitrov, Gancho; Vukotic, Ilija; Aidel, Osman; Schaffer, Rd; Albrand, Solveig

    2012-12-01

    Due to the good performance of the LHC accelerator, the ATLAS experiment has seen higher than anticipated levels for both the event rate and the average number of interactions per bunch crossing. In order to respond to these changing requirements, the current and future usage of CPU, memory and disk resources has to be monitored, understood and acted upon. This requires data collection at a fairly fine level of granularity: the performance of each object written and each algorithm run, as well as a dozen per-job variables, are gathered for the different processing steps of Monte Carlo generation and simulation and the reconstruction of both data and Monte Carlo. We present a system to collect and visualize the data from both the online Tier-0 system and distributed grid production jobs. Around 40 GB of performance data are expected from up to 200k jobs per day, thus making performance optimization of the underlying Oracle database of utmost importance.

  3. Seismic monitoring experiment of raise boring in 2014

    Energy Technology Data Exchange (ETDEWEB)

    Saari, J.; Malm, M. [AaF-Consult Oy, Espoo (Finland)

    2015-01-15

    In Olkiluoto, Posiva Oy has operated a local seismic network since February 2002. The purpose of the microearthquake measurements at Olkiluoto is to improve understanding of the structure, behaviour and long term stability of the bedrock. The studies include both tectonic and excavation-induced microearthquakes. An additional task of monitoring is related to safeguarding of ONKALO. The possibility to excavate an illegal access to ONKALO has been concerned when the safeguards are discussed. Therefore all recorded explosions in the Olkiluoto area and in ONKALO are located. If a concentration of explosions is observed, the origin of that is found out. Also a concept of hidden illegal explosions, detonated at the same time as the real excavation blasts, has been examined. According to the experience gained in Olkiluoto, it can be concluded that, as long the seismic network is in operation and the results are analysed by a skilled person, it is practically impossible to do illegal undetected excavation by blasting within the Olkiluoto seismic network area. In this report a possibility of seismic monitoring of undeclared excavation done by tunnel boring machine (TBM) has been investigated. In the earlier investigations the instruments were at the ground surface and the sensors were triaxial short period (1 Hz) geophones or broadband geophones. The characteristics (frequency content, polarity and amplitude) of the continuous seismic vibration generated by TMB were studied. The onset time of the seismic signal were not distinguished. Altogether 16 new 10 kHz accelerometers were installed in boreholes inside ONKALO March 2012. The sensors comprised a new subnetwork that monitored the raise boring of two shafts done 2014, from the level -455 m to the level -290 m. The aim was to record the seismic signal generated when the drill bit hits the rock at the moment the tunnel boring begins. Altogether 113 seismic signals generated by the drill bit were located during the

  4. 5 CFR 919.610 - What procedures does the OPM use in suspension and debarment actions?

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false What procedures does the OPM use in suspension and debarment actions? 919.610 Section 919.610 Administrative Personnel OFFICE OF PERSONNEL... (NONPROCUREMENT) General Principles Relating to Suspension and Debarment Actions § 919.610 What procedures...

  5. Development of Beam Conditions Monitor for the ATLAS experiment

    CERN Document Server

    Dolenc Kittelmann, Irena; Mikuž, M

    2008-01-01

    If there is a failure in an element of the accelerator the resulting beam losses could cause damage to the inner tracking devices of the experiments. This thesis presents the work performed during the development phase of a protection system for the ATLAS experiment at the LHC. The Beam Conditions Monitor (BCM) system is a stand-alone system designed to detect early signs of beam instabilities and trigger a beam abort in case of beam failures. It consists of two detector stations positioned at z=±1.84m from the interaction point. Each station comprises four BCM detector modules installed symmetrically around the beam pipe with sensors located at r=55 mm. This structure will allow distinguishing between anomalous events (beam gas and beam halo interactions, beam instabilities) and normal events due to proton-proton interaction by measuring the time-of-flight as well as the signal pulse amplitude from detector modules on the timescale of nanoseconds. Additionally, the BCM system aims to provide a coarse instan...

  6. ONKALO POSE experiment. Phase 3: execution and monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Valli, J. [Poeyry Finland Oy, Vantaa (Finland); Hakala, M. [KMS-Hakala Oy, Nokia (Finland); Wanne, T. [Saanio and Riekkola Oy, Helsinki (Finland); Kantia, P. [Geofcon Oy, Rovaniemi (Finland); Siren, T.

    2014-01-15

    Olkiluoto and the current maximum principal stress magnitude at the end of the experiment was estimated to exceed it. Upon emptying the hole, no clear damage was evident. No spalling had occurred. Strain gauge adhesions had failed and their results were disqualified. Acoustic emission and ultrasonic monitoring results pointed to events located in the immediate vicinity of a band of foliated gneiss, distributed in a N-S trend, although this could not be corroborated visually. Water loss measurements conducted in the hole indicated that the extent of damage was constrained to the first 100 - 200 mm of the hole wall. Based on these results, POSE Phase 3 was determined as inconclusive, although the heterogeneous and anisotropic nature of the Olkiluoto rock indicated that spalling type damage may not be a factor at Olkiluoto: failure in Olkiluoto conditions may be governed more by the relationship of the in situ stress state, the local geology and weakest component than by in situ stress, excavation geometry and mean strength. (orig.)

  7. AGC-4 Experiment Irradiation Monitoring Data Qualification Interim Report

    Energy Technology Data Exchange (ETDEWEB)

    Hull, Laurence Charles [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-08-01

    The Graphite Technology Development Program is running a series of six experiments to quantify the effects of irradiation on nuclear grade graphite. The fourth experiment, Advanced Graphite Creep 4 (AGC 4), began with Advanced Test Reactor (ATR) cycle 157D on May 30, 2015, and has been irradiated for two cycles. The capsule was removed from the reactor after ATR cycle 158A, which ended on January 2, 2016, due to interference with another experiment. Irradiation will resume when the interfering experiment is removed from the reactor. This report documents qualification of AGC 4 experiment irradiation monitoring data for use by the Advanced Reactor Technologies (ART) Technology Development Office (TDO) Program for research and development activities required to design and license the first HTR nuclear plant. Qualified data meet the requirements for use as described in the experiment planning and quality assurance documents. Failed data do not meet the requirements and provide no useable information. Trend data may not meet all requirements, but still provide some useable information. Use of Trend data requires assessment of how any deficiencies affect a particular use of the data. All thermocouples (TCs) have functioned throughout the AGC-4 experiment. All temperature data are Qualified for use by the ART TDO Program. Argon, helium, and total gas flow data were within expected ranges and are Qualified for use by the ART TDO Program. Discharge gas line moisture values were consistently low during cycle 157D. At the start of cycle 158A, gas moisture briefly spiked to over 600 ppmv and then declined throughout the cycle. Moisture values are within the measurement range of the instrument and are Qualified for use by the ART TDO Program. Graphite creep specimens were subjected to one of three loads, 393, 491, or 589 lbf. For a brief period during cycle 157D between 12:19 on June 2, 2015 and 08:23 on June 11, 2015 the load cells were wired incorrectly resulting in missing

  8. Aespoe Pillar Stability Experiment. Acoustic emission and ultrasonic monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Haycox, Jon; Pettitt, Will; Young, R. Paul [Applied Seismology Consultants Ltd., Shrewsbury (United Kingdom)

    2005-12-15

    This report describes the results from acoustic emission (AE) and ultrasonic monitoring of the Aespoe Pillar Stability Experiment (APSE) at SKB's Hard Rock Laboratory (HRL), Sweden. The APSE is being undertaken to demonstrate the current capability to predict spalling in a fractured rock mass using numerical modelling techniques, and to demonstrate the effect of backfill and confining pressure on the propagation of micro-cracks in rock adjacent to deposition holes within a repository. An ultrasonic acquisition system has provided acoustic emission and ultrasonic survey monitoring throughout the various phases of the experiment. Results from the entire data set are provided with this document so that they can be effectively compared to several numerical modelling studies, and to mechanical and thermal measurements conducted around the pillar volume, in an 'integrated analysis' performed by SKB staff. This document provides an in-depth summary of the AE and ultrasonic survey results for future reference. The pillar has been produced by excavating two 1.8 m diameter deposition holes 1 m apart. These were bored in 0.8 m steps using a Tunnel Boring Machine specially adapted for vertical drilling. The first deposition hole was drilled in December 2003. Preceding this a period of background monitoring was performed so as to obtain a datum for the results. The hole was then confined to 0.7 MPa internal over pressure using a specially designed water-filled bladder. The second deposition hole was excavated in March 2004. Heating of the pillar was performed over a two month period between ending in July 2004, when the confined deposition hole was slowly depressurised. Immediately after depressurisation the pillar was allowed to cool with cessation of monitoring occurring a month later. A total of 36,676 AE triggers were recorded over the reporting period between 13th October 2003 and 14th July 2004. Of these 15,198 have produced AE locations. The AE data set

  9. Aespoe Pillar Stability Experiment. Acoustic emission and ultrasonic monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Haycox, Jon; Pettitt, Will; Young, R. Paul [Applied Seismology Consultants Ltd., Shrewsbury (United Kingdom)

    2005-12-15

    This report describes the results from acoustic emission (AE) and ultrasonic monitoring of the Aespoe Pillar Stability Experiment (APSE) at SKB's Hard Rock Laboratory (HRL), Sweden. The APSE is being undertaken to demonstrate the current capability to predict spalling in a fractured rock mass using numerical modelling techniques, and to demonstrate the effect of backfill and confining pressure on the propagation of micro-cracks in rock adjacent to deposition holes within a repository. An ultrasonic acquisition system has provided acoustic emission and ultrasonic survey monitoring throughout the various phases of the experiment. Results from the entire data set are provided with this document so that they can be effectively compared to several numerical modelling studies, and to mechanical and thermal measurements conducted around the pillar volume, in an 'integrated analysis' performed by SKB staff. This document provides an in-depth summary of the AE and ultrasonic survey results for future reference. The pillar has been produced by excavating two 1.8 m diameter deposition holes 1 m apart. These were bored in 0.8 m steps using a Tunnel Boring Machine specially adapted for vertical drilling. The first deposition hole was drilled in December 2003. Preceding this a period of background monitoring was performed so as to obtain a datum for the results. The hole was then confined to 0.7 MPa internal over pressure using a specially designed water-filled bladder. The second deposition hole was excavated in March 2004. Heating of the pillar was performed over a two month period between ending in July 2004, when the confined deposition hole was slowly depressurised. Immediately after depressurisation the pillar was allowed to cool with cessation of monitoring occurring a month later. A total of 36,676 AE triggers were recorded over the reporting period between 13th October 2003 and 14th July 2004. Of these 15,198 have produced AE locations. The AE data set

  10. Monitoring hyporheic exchanges during a dam controlled experiment

    Science.gov (United States)

    Houzé, Clémence; Varnède, Lucie; Durand, Véronique; Pessel, Marc

    2016-04-01

    Precise understanding of the hyporheic exchanges response to stream flow fluctuations remains a great challenge for many environmental and hydrological problems. Multiplication of natural stream restoration programs and anthropic structures removal highlight that a better understanding of the hydrodynamic and ecological functioning of hyporheic exchanges is critical . The objective of this field experiment was to monitor the dynamic exchanges within the hyporheic zone due to an artificial stream head variation. Various types of measurements were performed, using natural tracers and electrical resistivity tomography (ERT). The dam downstream the studied river reach was successively lowered during two days, and raised during three days, implying river heads variations of about 15cm. The studied area was equipped with CTD probes (measuring the head and the conductivity) within the river, 2 multi-depths water sampling tubes inserted up to one meter depth within the riverbed deposits and 3 ERT profiles with various electrode spacing (20 cm, 25 cm, 50 cm). During the 5 days experiment, water sampling and ERT profiles were done regularly. Estimations of the sediments hydraulic conductivity were obtained by several slug tests in plastic tubes at different depths within the streambed. First results showed that stream fluctuation leads to a rapid hyporheic response according to chloride variations between stream and riverbed sediments. Similar results between geochemical and geophysical tools were found. A decrease in stream head leads to reduce the depth of the mixing zone, as the river gaining conditions intensify. On the contrary, we observed that an increased river head tends to deepen the hyporheic exchange zone.

  11. Digital Beam Position Monitor for the Happex Experiment

    CERN Document Server

    Kauffman, Sherlon R; Freyberger, Arne; Kaufman, Lisa; Musson, John

    2005-01-01

    The proposed HAPPEX experiment at CEBAF employs a three cavity monitor system for high-precision (1 mm), high-bandwidth (100 kHz) position measurements. This is performed using a cavity triplet consisting of two TM110-mode cavities (one each for X and Y planes) combined with a conventional TM-010-mode cavity for a phase and magnitude reference. Traditional systems have used the TM010 cavity output to directly down convert the BPM cavity signals to base band. The Multi-channel HAPPEX digital receiver simultaneously I/Q samples each cavity and extracts position using a CORDIC algorithm. The hardware design consists of a digital receiver daughter board and digital processor motherboard that resides in a VXI crate. The daughter board down converts 1.497 GHz signals from the TM010 cavity and X and Y signals from the TM110 cavities to 4 MHz, and extracts the quadrature digital signals. The motherboard processes this data and computes beam intensity and X-Y positions with a resolution of one mm, 100 kHz output bandw...

  12. Materials International Space Station Experiment-6 (MISSE-6) Atomic Oxygen Fluence Monitor Experiment

    Science.gov (United States)

    Banks, Bruce A.; Miller, Sharon K.; Waters, Deborah L.

    2010-01-01

    An atomic oxygen fluence monitor was flown as part of the Materials International Space Station Experiment-6 (MISSE-6). The monitor was designed to measure the accumulation of atomic oxygen fluence with time as it impinged upon the ram surface of the MISSE 6B Passive Experiment Container (PEC). This was an active experiment for which data was to be stored on a battery-powered data logger for post-flight retrieval and analysis. The atomic oxygen fluence measurement was accomplished by allowing atomic oxygen to erode two opposing wedges of pyrolytic graphite that partially covered a photodiode. As the wedges of pyrolytic graphite erode, the area of the photodiode that is illuminated by the Sun increases. The short circuit current, which is proportional to the area of illumination, was to be measured and recorded as a function of time. The short circuit current from a different photodiode, which was oriented in the same direction and had an unobstructed view of the Sun, was also to be recorded as a reference current. The ratio of the two separate recorded currents should bear a linear relationship with the accumulated atomic oxygen fluence and be independent of the intensity of solar illumination. Ground hyperthermal atomic oxygen exposure facilities were used to evaluate the linearity of the ratio of short circuit current to the atomic oxygen fluence. In flight, the current measurement circuitry failed to operate properly, thus the overall atomic oxygen mission fluence could only be estimated based on the physical erosion of the pyrolytic graphite wedges. The atomic oxygen fluence was calculated based on the knowledge of the space atomic oxygen erosion yield of pyrolytic graphite measured from samples on the MISSE 2. The atomic oxygen fluence monitor, the expected result and comparison of mission atomic oxygen fluence based on the erosion of the pyrolytic graphite and Kapton H atomic oxygen fluence witness samples are presented in this paper.

  13. Accelerated Aging Experiments for Capacitor Health Monitoring and Prognostics

    Data.gov (United States)

    National Aeronautics and Space Administration — This paper discusses experimental setups for health monitoring and prognostics of electrolytic capacitors under nominal operation and accelerated aging conditions....

  14. 75 FR 47031 - Submission for OPM Review; Request for Comments on a Revised Information Collection: (OMB Control...

    Science.gov (United States)

    2010-08-04

    ..., contact Cyrus S. Benson on (202) 606- 4808, FAX (202) 606-0910 or via E-mail to Cyrus.Benson@opm.gov... coordination contact: Cyrus S. Benson, Team Leader, Publications Team, Retirement & Benefits/...

  15. The Los Angeles Experience in Monitoring Desegregation: Progress and Prospects.

    Science.gov (United States)

    King, Nicelma J.

    1980-01-01

    Presents a case analysis of the role of the Los Angeles (California) School Monitoring Committee in the implementation of school desegregation. Demonstrates how citizen monitoring advisory committees work in desegregated settings and discusses the challenges, problems, and opportunities they are likely to face. (Author/MK)

  16. Experience with Holter monitoring during propranolol therapy for infantile hemangiomas.

    Science.gov (United States)

    Jacks, Stephanie K; Kertesz, Naomi J; Witman, Patricia M; Fernandez Faith, Esteban

    2015-08-01

    Although adverse events in children treated with propranolol have proven rare, the appropriate methods of assessing cardiovascular risk and monitoring for toxicity when the medication is used for infantile hemangiomas remain unclear. We sought to analyze Holter monitor reports of otherwise healthy patients on propranolol for infantile hemangiomas to determine the incidence of sustained arrhythmias and to evaluate the utility of Holter monitoring in the outpatient setting. We retrospectively reviewed the charts of patients with infantile hemangioma who underwent 24-hour Holter monitoring after initiation or dose escalation of propranolol between 2011 and 2014. In all, 43 patients aged 1.8 to 36.2 months, with 44 Holter monitor reports, were included in the study. No sustained arrhythmias were revealed. The treatment plan was not altered in any patient based on the Holter monitor report. This was a retrospective study design. Our study suggests that Holter monitoring may be unnecessary in otherwise healthy patients with infantile hemangioma older than 12 weeks who are treated with propranolol in the outpatient setting. Copyright © 2015 American Academy of Dermatology, Inc. Published by Elsevier Inc. All rights reserved.

  17. Mindfulness og nærværende opmærksomhed i skole og daginstitution

    DEFF Research Database (Denmark)

    Nielsen, Anne Maj; Herskind, Mia

    Mindfulness og nærværende opmærksomhed i skole og daginstitution Vi præsenterer resultater fra undersøgelser af, hvordan lærere og pædagoger lærer mindfulness og hvordan det får betydning for deres praksis og forholdemåder i pædagogik og undervisning. Undersøgelserne er kvalitative og i...

  18. Mindfulness og nærværende opmærksomhed i skole og daginstitution

    DEFF Research Database (Denmark)

    Nielsen, Anne Maj; Herskind, Mia

    Mindfulness og nærværende opmærksomhed i skole og daginstitution Vi præsenterer resultater fra undersøgelser af, hvordan lærere og pædagoger lærer mindfulness og hvordan det får betydning for deres praksis og forholdemåder i pædagogik og undervisning. Undersøgelserne er kvalitative og i...

  19. OPMS (Officer Personnel Management System), MILPERCEN and the Corps: A Commentary.

    Science.gov (United States)

    1983-06-01

    in. 20. AUSTRAC ? (Cmiflnm on ,ewwem stft Hf noea~evy ind Iden~jI& 6r blook ..uum a) -ŽThe Of ficer Personnel M ’anagement system (opMS) was the first...bF specialty apprewed *Ad a new OW system in effnt. Som 26 - - - - - - - ._ ~ t q~~ ,.n w SeotI SortlAS cut at he reAtve role of the pmpaponenq heeds

  20. Online Monitoring for the Silicon Tracker of the LHCb Experiment

    CERN Document Server

    Chiapolini, N

    While the LHCb exp eriment acquires data, the detector and the data quality are continuously monitored. The rst part of this thesis describ es a package that was develop ed for managing monitoring pages. This package is a sub detector indep endent to ol originally develop ed for the online monitoring system of the Silicon Tracker. In the second half of this thesis, metho des to calculate the common mo de subtracted noise in the Silicon Tracker are compared. Dierent p ossible adjustments are evaluated and p ossible improvements presented.

  1. Wakefield Monitor Experiments with X-Band Accelerating Structures

    CERN Document Server

    Lillestøl, Reidar; Corsini, Roberto; Döbert, Steffen; Farabolini, Wilfrid; Malina, Lukas; Pfingstner, Juergen; Wuensch, Walter

    2015-01-01

    The accelerating structures for CLIC must be aligned with a precision of a few um with respect to the beam trajectory in order to mitigate emittance growth due to transverse wake fields. We report on first results from wake field monitor tests in an X-band structure, with a probe beam at the CLIC Test Facility. The monitors are currently installed in the CLIC Two-Beam Module. In order to fully demonstrate the feasibility of using wakefield monitors for CLIC, the precision of the monitors must be verified using a probe beam while simultaneously filling the structure with high power rf used to drive the accelerating mode. We outline plans to perform such a demonstration in the CLIC Test Facility.

  2. LHCb: Online Data Monitoring in the LHCb experiment

    CERN Multimedia

    Frank, M

    2007-01-01

    Data monitoring is an important concept to verify the detector performance with quick response in case of problems (hardware aspects) and to verify the performance of the software based event filtering and rejection (software aspects).

  3. Microvibration monitoring: some recent experiences in an operating microelectronics facility

    Science.gov (United States)

    Hassett, Kevin

    1992-02-01

    Major construction work is currently underway at Intel''s Aloha, Oregon, campus. Because of concerns about the effects that construction-generated vibration might have on adjacent ongoing microelectronics manufacturing activities, two important steps were taken. The first of these was to establish guidelines that would be followed by the construction contractor to limit vibration disturbance. The second was to install a computer-based monitoring system that would continuously measure the vibration on the floor of the microelectronics manufacturing facility. In this way, the vibration effects of the construction activities would be monitored and adjusted, by modifying procedures, if necessary. The monitoring program is discussed in this paper. The major characteristics of the monitoring system, the placement of the transducers, and the ways in which the data were managed are described. Some typical data are shown and discussed.

  4. The Joint Experiment for Crop Assessment and Monitoring (JECAM) Initiative: Developing methods and best practices for global agricultural monitoring

    Science.gov (United States)

    Champagne, C.; Jarvis, I.; Defourny, P.; Davidson, A.

    2014-12-01

    Agricultural systems differ significantly throughout the world, making a 'one size fits all' approach to remote sensing and monitoring of agricultural landscapes problematic. The Joint Experiment for Crop Assessment and Monitoring (JECAM) was established in 2009 to bring together the global scientific community to work towards a set of best practices and recommendations for using earth observation data to map, monitor and report on agricultural productivity globally across an array of diverse agricultural systems. These methods form the research and development component of the Group on Earth Observation Global Agricultural Monitoring (GEOGLAM) initiative to harmonize global monitoring efforts and increase market transparency. The JECAM initiative brings together researchers from a large number of globally distributed, well monitored agricultural test sites that cover a range of crop types, cropping systems and climate regimes. Each test site works independently as well as together across multiple sites to test methods, sensors and field data collection techniques to derive key agricultural parameters, including crop type, crop condition, crop yield and soil moisture. The outcome of this project will be a set of best practices that cover the range of remote sensing monitoring and reporting needs, including satellite data acquisition, pre-processing techniques, information retrieval and ground data validation. These outcomes provide the research and development foundation for GEOGLAM and will help to inform the development of the GEOGLAM "system of systems" for global agricultural monitoring. The outcomes of the 2014 JECAM science meeting will be discussed as well as examples of methods being developed by JECAM scientists.

  5. Aespoe Pillar Stability Experiment. Final experiment design, monitoring results and observations

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Christer [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Eng, Anders [Acuo Engineering AB, Linkoeping (Sweden)

    2005-12-15

    The field part of the Aespoe Pillar Stability Experiment at the Aespoe Hard Rock Laboratory (HRL) was finished in 2004. The experiment was designed to induce and monitor the process of brittle failure, spalling, in a fractured rock mass under controlled conditions. The field part was successfully conducted and a large data set was obtained. This report presents the final design of the experiment, the results of the monitoring, and the observations made during the spalling process and when the spalled rock was removed. When heating of the rock was initiated the rock responded quickly. After only a few days the spalling process was activated in the notch, as indicated by the acoustic emission system, and shortly thereafter displacement readings were recorded. Contraction (radial expansion) of the rock was recorded by several instruments before the notch reached the instrument levels. This contraction is probably the result of a 3D re-distribution of the stresses. The temperature increase in the system was both slower and reached a steady state much earlier than predicted by the numerical models. The propagation of the notch was therefore halted after approximately one month of heating. The power to the electrical heaters was therefore doubled. Spalling then started up again, and in one month's time it had propagated to a depth of approximately five metres in the hole. A second steady state was now reached, but this time the heater power was kept constant for a while to let the rock settle before the confinement pressure was reduced from 700 kPa to 0 in decrements of 50 kPa. The rock mass response to the pressure drop was very limited until the pressure was lowered to approximately 200 kPa (the atmospheric pressure is not included in the given pressure values). Large displacements and a high acoustic emission hit frequency were then measured in the open hole. After the de-pressurization of the confined hole, the heaters were left on for approximately one week

  6. Flow Monitoring Experiences at the Ethernet-Layer

    NARCIS (Netherlands)

    Hofstede, Rick; Drago, Idilio; Sperotto, Anna; Pras, Aiko; Lehnert, Ralf

    2011-01-01

    Flow monitoring is a scalable technology for providing summaries of network activity. Being deployed at the IP-layer, it uses fixed flow definitions, based on fields of the IP-layer and higher layers. Since several backbone network operators are considering the deployment of (Carrier) Ethernet in th

  7. Global Public Water Education: The World Water Monitoring Day Experience

    Science.gov (United States)

    Araya, Yoseph Negusse; Moyer, Edward H.

    2006-01-01

    Public awareness of the impending world water crisis is an important prerequisite to create a responsible citizenship capable of participating to improve world water management. In this context, the case of a unique global water education outreach exercise, World Water Monitoring Day of October 18, is presented. Started in 2002 in the United…

  8. The first experience with LHC beam gas ionization monitor

    CERN Document Server

    Sapinski, M; Dehning, B; Guerrero, A; Patecki, M; Versteegen, R

    2012-01-01

    The Beam Gas Ionization Monitors (BGI) are used to measure beam emittance on LHC. This paper describes the detectors and their operation and discusses the issues met during the commissioning. It also discusses the various calibration procedures used to correct for non-uniformity of Multi-Channel plates and to correct the beam size for effects affecting the electron trajectory after ionization.

  9. The experience in monitoring pennalties and alternative measures: the case of the NUMOPA/CEAPA/NUAPA

    Directory of Open Access Journals (Sweden)

    Sandra regina de abreu Pires

    2014-06-01

    Full Text Available The present text aimed to show an experience with the monitoring of the execution of the penalties and alternative measures developed in the Londrina – Paraná region, through the projects Londrina’s Center for Alternative Sentencing Monitoring, Center for Alternative Sentencing Monitoring of Arapongas; Central Monitoring and Sentencing Alternative Measures and Center for Monitoring and Sentencing Alternative Measures of Cambé. The text if initiates with some notes on sentencing alternative measures in view of allowing the visualization of the thematic context of the experience. After that, it contemplates the experience directly, telling first the trajectory covered for, continuous act, to summarily approach some elements of the work methodology. It finishes with a mention to some of the gotten positive results with the developed work.

  10. Instrumentation of Lysimeter Experiments and Monitoring of Soil Parameters

    Energy Technology Data Exchange (ETDEWEB)

    Schmid, T.; Tallos, A.; Millan, R.; Vera, R.; Recreo, F.

    2004-07-01

    This study forms part of the project Mercurio and Recuperation de Terrenos Afectados por Mercurio Ambiental (RETAMA), which determines the behaviour of mercury in the soil-plant system within the area of Almaden. The objective of this work is to instrument lysimeters with a set of electronic sensors to monitor physical and chemical soil parameters (moisture content, soil temperature, soil water matrix potential. Eh and pH) over a period of a complete vegetation cycle for selected crops. Physical and chemical soil analyses have been carried out on samples two soil profiles marking the extreme perimeter where the lysimeters were extracted. The monitoring data obtained every half hour show that the physicochemical conditions of the soils in the lysimeter can be correlated with the type of cultivation in the lysimeters. The results for parameters such as soil water matrix potential and the soil temperature reflect the diurnal changes; and fluctuations of the Eh can be related to the biological activities in the soils and are within oxid and suboxic conditions. Slight fluctuations have been observed for the pH and constant volumetric moisture content is maintained during the period of no hydric stress. (Author) 16 refs.

  11. Lobster X-ray All Sky Monitor-Novel experiment for monitoring GRBs and XRFs

    Energy Technology Data Exchange (ETDEWEB)

    Sveda, L. [Czech Technical Univ., Prague (Czech Republic). Faculty of Nuclear Sciences and Physical Engineering; Hudec, R. [Astronomical Institute of Academy of Sciences, Onderjov (Czech Republic); Reflex s.r.o., Prague (Czech Republic); Inneman, A. [Reflez s.r.o., Prague (Czech Republic)

    2005-07-15

    We present a brief review of the X-ray All-Sky Monitor (ASM) based on Lobster Eye (LE) optics. The system will observe the whole sky in soft X-rays with the limiting flux up to two orders of magnitude better than current ASMs.

  12. Beam Extinction Monitoring in the Mu2e Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Prebys, Eric [Fermilab; Bartoszek, Larry [Technicare; Gaponenko, Andrei [Fermilab; Kasper, Peter [Fermilab

    2015-06-01

    The Mu2e Experiment at Fermilab will search for the conversion of a muon to an electron in the field of an atomic nucleus with unprecedented sensitivity. The experiment requires a beam consisting of proton bunches approximately 200ns FW long, separated by 1.7 microseconds, with no out-of-time protons at the 10⁻¹⁰ fractional level. The verification of this level of extinction is very challenging. The proposed technique uses a special purpose spectrometer which will observe particles scattered from the production target of the experiment. The acceptance will be limited such that there will be no saturation effects from the in-time beam. The precise level and profile of the out-of-time beam can then be built up statistically, by integrating over many bunches.

  13. Prescription-Event Monitoring. Recent experience with 5 NSAIDs.

    Science.gov (United States)

    Rawson, N S; Inman, W H

    1986-01-01

    The principles and methods of Prescription-Event Monitoring (PEM) are presented and illustrated by a study of general practice notes of 55,642 patients, who were prescribed one of five non-steroidal anti-inflammatory drugs (NSAIDs). PEM showed the expected side effects and a low incidence of serious adverse reactions. The general pattern of events during and following treatment was, with few exceptions, very similar. The incidence of side effects that have led to the withdrawal of three of the drugs from the market was extremely low. Complications of peptic ulcer were uncommon and deaths from this cause were rare. No difference was apparent in the incidence of serious gastrointestinal complications during or after stopping treatment or changing to another NSAID.

  14. Remote Control and Monitoring of VLBI Experiments by Smartphones

    Science.gov (United States)

    Ruztort, C. H.; Hase, H.; Zapata, O.; Pedreros, F.

    2012-12-01

    For the remote control and monitoring of VLBI operations, we developed a software optimized for smartphones. This is a new tool based on a client-server architecture with a Web interface optimized for smartphone screens and cellphone networks. The server uses variables of the Field System and its station specific parameters stored in the shared memory. The client running on the smartphone by a Web interface analyzes and visualizes the current status of the radio telescope, receiver, schedule, and recorder. In addition, it allows commands to be sent remotely to the Field System computer and displays the log entries. The user has full access to the entire operation process, which is important in emergency cases. The software also integrates a webcam interface.

  15. Status of Wakefield Monitor Experiments at the CLIC Test Facility

    CERN Document Server

    Lillestøl, Reidar; Aftab, Namra; Corsini, Roberto; Döbert, Steffen; Farabolini, Wilfrid; Grudiev, Alexej; Javeed, Sumera; Pfingstner, Juergen; Wuensch, Walter

    2016-01-01

    For the very low emittance beams in CLIC, it is vital to mitigate emittance growth which leads to reduced luminosity in the detectors. One factor that leads to emittance growth is transverse wakefields in the accelerating structures. In order to combat this the structures must be aligned with a precision of a few um. For achieving this tolerance, accelerating structures are equipped with wakefield monitors that measure higher-order dipole modes excited by the beam when offset from the structure axis. We report on such measurements, performed using prototype CLIC accelerating structures which are part of the module installed in the CLIC Test Facility 3 (CTF3) at CERN. Measurements with and without the drive beam that feeds rf power to the structures are compared. Improvements to the experimental setup are discussed, and finally remaining measurements that should be performed before the completion of the program are summarized.

  16. A new respiratory rate monitor: development and initial clinical experience

    DEFF Research Database (Denmark)

    Hök, B; Wiklund, L; Henneberg, S

    1993-01-01

    different kinds of interference, including motion artefacts. The sensor is nonexpensive, rugged, simple to apply and inherently safe. An instrument with continuous display of respiratory rate, and an audiovisual apnea alarm has been designed and built. The complete system has been tested on patients during......The need for continuous, noninvasive, and reliable respiratory rate monitoring during recovery from general anesthesia has long been recognized. Alternative principles can be grouped into those detecting the respiratory effort, and those detecting the actual result, i.e. the respiratory gas flow...... recovery after general anesthesia. In 16 patients, the respiratory rate displayed by the instrument has been correlated against that visually observed. A good correlation was obtained. Minor discrepancies can be explained from the fact that visual observation corresponds to the respiratory effort, whereas...

  17. Therapeutic drug monitoring for imatinib: Current status and Indian experience.

    Science.gov (United States)

    Arora, Brijesh; Gota, Vikram; Menon, Hari; Sengar, Manju; Nair, Reena; Patial, Pankaj; Banavali, S D

    2013-07-01

    Imatinib is the current gold standard for treatment of chronic myeloid leukemia (CML). Recent pharmacokinetic studies have shown considerable variability in trough concentrations of imatinib due to variations in its metabolism, poor compliance, or drug-drug interactions and highlighted its impact on clinical response. A trough level close to 1000 ng/mL, appears to be correlated with better cytogenetic and molecular responses. Therapeutic Drug Monitoring (TDM) for imatinib may provide useful added information on efficacy, safety and compliance than clinical assessment alone and help in clinical decision making. It may be particularly helpful in patients with suboptimal response to treatment or treatment failure, severe or rare adverse events, possible drug interactions, or suspected nonadherence. Further prospective studies are needed to confirm relationship between imatinib plasma concentrations with response, and to define effective plasma concentrations in different patient populations.

  18. Remote Monitoring and Controlling of a Material Science Experiment

    Directory of Open Access Journals (Sweden)

    Wattanapong KURDTHONGMEE

    2004-01-01

    Full Text Available The computer industry’s remarkable ability to integrate more transistors into a small area of silicon is increasing the intelligence of our devices and simultaneously decreasing their cost and power consumption. In addition, the proliferation of wired and wireless networking spurred by the development of the world-wide web and demands for mobile access are enabling low-cost connectivity among computing devices. It is now possible to connect every computing device into a true world-wide web that connects the physical world of sensors and actuators to the virtual world of our information utilities and services. This paper examines an application of an integration of the intelligent chip with the network connectivity into a material science experiment designed to study the sorption of woods. The intelligence and network connectivity infrastructures of the system eliminate laborious tasks previously required during experiment control and data collection processes.

  19. Experiences of air quality monitoring in northern Italy

    Energy Technology Data Exchange (ETDEWEB)

    Fumagalli, I.; Mignanego, L.; Sormani, L. [European Commision - Joint Research Centre, Ispra (Italy)]|[PHYTOS snc, Biassono (Italy)]|[Terra Viva, Vigevano (Italy)

    2002-07-01

    Air quality biomonitoring plays an important role in the assessment of air pollution levels and their impact on vegetation. Following observations of constantly high air pollutant levels in the Po Valley, CESI (former ENEL-Research) has been developing several specific research projects since 1986, in order to increase the knowledge about air quality biomonitoring. Four relevant experiences made in the past fifteen years are reported. (orig.)

  20. Monitoring the Veterinary Medical Student Experience: An Institutional Pilot Study.

    Science.gov (United States)

    Miller, RoseAnn; Mavis, Brian E; Lloyd, James W; Grabill, Chandra M; Henry, Rebecca C; Patterson, Coretta C

    2015-01-01

    Veterinary medical school challenges students academically and personally, and some students report depression and anxiety at rates higher than the general population and other medical students. This study describes changes in veterinary medical student self-esteem (SE) over four years of professional education, attending to differences between high and low SE students and the characteristics specific to low SE veterinary medical students. The study population was students enrolled at the Michigan State University College of Veterinary Medicine from 2006 to 2012. We used data from the annual anonymous survey administered college-wide that is used to monitor the curriculum and learning environment. The survey asked respondents to rate their knowledge and skill development, learning environment, perceptions of stress, skill development, and SE. Participants also provided information on their academic performance and demographics. A contrasting groups design was used: high and low SE students were compared using logistic regression to identify factors associated with low SE. A total of 1,653 respondents met inclusion criteria: 789 low SE and 864 high SE students. The proportion of high and low SE students varied over time, with the greatest proportion of low SE students during the second-year of the program. Perceived stress was associated with low SE, whereas perceived supportive learning environment and skill development were associated with high SE. These data have provided impetus for curricular and learning environment changes to enhance student support. They also provide guidance for additional research to better understand various student academic trajectories and their implications for success.

  1. Spontaneous adverse drug reaction monitoring in oncology: Our experience

    Directory of Open Access Journals (Sweden)

    K Kaur

    2015-01-01

    Full Text Available Background: Adverse drug reaction (ADR monitoring is slowly developing as an important aspect of healthcare. The aim of the study was to study the pattern of adverse drug reactions in the Oncology department of a tertiary care hospital. Materials And Methods: This was a prospective study conducted in the Oncology department of a tertiary care hospital in which ADRs were reported spontaneously. The ADRs were noted from 1st January, 2007 to 30th June, 2011. Following were noted: demographics, premedication (if any, diagnosis, chemotherapy (regimen, cycles, medication history, and alteration in the treatment or co morbidities, ADRs (severity and management. Adverse drug reactions were noted by patient interview, collaborating with information on file, recording changes in the prescribing chart and investigations, consulting the doctor on duty. Results: During this study period, there were total of 14,475 visits of patients from which 2500 ADRs were recorded. Maximum number of ADRs were noted with platinum compounds (25.52% followed by pyrimidine antagonists (19.88%. The most common malignancy reported in our hospital was Carcinoma breast (20% followed by leukemia (12% and Ca ovary (12%. Alopecia (27.76% was the most common ADR followed by anemia (7.48%, thrombocytopenia (6.96% and constipation (6.16%. Conclusion: Alopecia is the most common ADR and platinum compounds were responsible for the maximum number of ADRs. The most common carcinoma reported during this period was carcinoma breast.

  2. DEFORMATION MONITORING OF MATERIALS UNDER STRESS IN LABORATORY EXPERIMENTS

    Directory of Open Access Journals (Sweden)

    D. Skarlatos

    2016-06-01

    Full Text Available Photogrammetry is a valid alternative solution to linear variable differential transformer (LVDT measurements in structural testing in laboratory conditions. Although the use of LVDTs boasts a high degree of accuracy, on the other hand it is limiting as it offers measurements between two points and it thus might be unable to capture localized deformations and strains over a bigger area of a structural specimen. In this aspect photogrammetry seems to offer certain advantages. Commercial solutions provide limited testing envelopes, while on the other hand, the wide range on new materials need more versatile techniques. Based on the need to develop an in-house photogrammetric toolbox to support several structural and material experiments in the department Advanced Pore Morphology (APM aluminium foam specimens developed at Fraunhofer IFAM in Germany and cured at CUT, were tested under monotonic compressive load. Data acquisition, analysis and results, along with lessons learnt from the process are presented in this work.

  3. New possibilities for the teaching of nursing in mental health: an experience in monitoring

    Directory of Open Access Journals (Sweden)

    Karina Faine da Silva Freitas

    2014-12-01

    Full Text Available This study aimed at reflecting on the possibilities of applying new methodological strategies in the teaching and learning in nursing. The study is a report of an experiment conducted from a monitoring project of a syllabus activity of nursing in mental and psychiatry health. The methodology was developed by introducing the student/monitor in the contents of theoretical practical learning that were performed by means of Active Methodologies in three academic semesters in 2010 and 2011, in the Nursing School of the Universade Federal do Pará, Brazil. The monitor performed activities to support professors as the ‘Ciclo de Estudos Aprender Fazendo’ (Cycle of Studies Learning Experiencing. It was revealed as a strengthening factor the new pedagogical proposal of the course and shown that the monitoring experience is presented as a new possibility of teaching in mental health from the introduction of different ways to approach the topic in class.

  4. 5 CFR 839.1002 - Will OPM compute the lost earnings if my qualifying retirement coverage error was previously...

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Will OPM compute the lost earnings if my... Section 839.1002 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE... COVERAGE CORRECTIONS ACT Lost Earnings for Certain Make-up Contributions to the TSP § 839.1002 Will...

  5. 5 CFR 919.645 - Do other Federal agencies know if the OPM agrees to a voluntary exclusion?

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Do other Federal agencies know if the OPM agrees to a voluntary exclusion? 919.645 Section 919.645 Administrative Personnel OFFICE OF PERSONNEL... (NONPROCUREMENT) General Principles Relating to Suspension and Debarment Actions § 919.645 Do other...

  6. R & D of a Gas-Filled RF Beam Profile Monitor for Intense Neutrino Beam Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Yonehara, K. [Fermilab; Backfish, M. [Fermilab; Moretti, A. [Fermilab; Tollestrup, A. V. [Fermilab; Watts, A. [Fermilab; Zwaska, R. M. [Fermilab; Abrams, R. [MUONS Inc., Batavia; Cummings, M. A.; Dudas, A. [MUONS Inc., Batavia; Johnson, R. P. [MUONS Inc., Batavia; Kazakevich, G. [MUONS Inc., Batavia; Neubauer, M. [MUONS Inc., Batavia; Liu, Q. [Case Western Reserve U.

    2017-05-01

    We report the R&D of a novel radiation-robust hadron beam profile monitor based on a gas-filled RF cavity for intense neutrino beam experiments. An equivalent RF circuit model was made and simulated to optimize the RF parameter in a wide beam intensity range. As a result, the maximum acceptable beam intensity in the monitor is significantly increased by using a low-quality factor RF cavity. The plan for the demonstration test is set up to prepare for future neutrino beam experiments.

  7. Application of the object-oriented paradigm for scientific experiment monitoring & control

    Science.gov (United States)

    Racaud, Thierry; Assis-Arantes, Patrick

    1994-12-01

    This paper presents a new approach to the monitoring and control of scientific experiments. This new approach is based on an object-oriented environment composed of three elements: (a) A graphical environment that allows the creation of an object-oriented model of the experiment based on objects, attributes and methods. (b) A language for writing procedures to access the model by sending messages in order to operate the experiment. (c) A man-machine interface based on an interactive graphical layer above the object-oriented representation for controlling and monitoring the experiment. This new approach has been prototyped in a project called "Man-Machine Interface Software for Ground User Terminal", or User Terminal in short. The project is carried out by SPACEBEL Informatique on behalf of the European Space Research and Technology Centre (ESTEC). Although this project has been undertaken for the operation of scientific experiments in space, User Terminal can naturally be used for the monitoring and control of ground based experiments. This article presents the User Terminal system as well as one of the first practical exercises performed in the context of the teleoperation of a liquid science experiment to be shipped into space.

  8. Development and testing of fiber beam monitors for the Muon g-2 experiment

    Science.gov (United States)

    Bjorkquist, Robin; Diamond, Edward; Martinez, Benjamin; Sblendorio, Alec; Gray, Frederick; Muon g-2 Collaboration

    2017-01-01

    The Muon g-2 experiment at Fermilab will measure the anomalous magnetic moment of the muon to a precision of 140 parts per billion. Careful characterization of the stored muon beam will be crucial for the experiment, because several beam-related systematic effects must be taken into account. The fiber beam monitors will provide a direct measurement of the spatial, temporal and momentum distributions and betatron oscillations of the stored muon beam. These detectors were originally built by KEK for the previous Muon g-2 experiment at Brookhaven National Lab, but have been repaired and refurbished for the upcoming experiment, including new scintillating fibers and upgraded SiPM-based readout electronics. We present the final design of the fiber beam monitor system and the results of a recent beam test performed at SLAC.

  9. Experience of monitoring the recurrent laryngeal nerve in thyroid surgery with endotracheal intubation

    Directory of Open Access Journals (Sweden)

    Liang Feng

    2017-01-01

    Full Text Available Purpose:To analysis clinical experience of applying recurrent laryngeal monitoring endotracheal tube (NIM EMG Endotracheal Tube in the surgery of thyroid. Method: A retrospective analysis of 84 patients who underwent endotracheal intubation laryngeal nerve monitoring by thyroid surgery in the Chinese-Japanese Friendship Hospital of Jilin University from March to December in 2015. To summarize the experience of intubation with NIM EMG Endotracheal Tube. Result 77 (91.7%had initial intubation achievement in the 84 patients.FROM the 77 cases we had gotten s atisfactory nerve monitoring signal.Whereas there are 7 cases (8.3% appear abnormal EMG or signal missing, in the 7 cases there is one which being intubated too deep, 3 cases which being intubated too shallow and 3 cases with malrotation intubation.Conclusion: We got the satisfactory signals after adjust1ing the tube by using the visual laryngoscope.

  10. Observations of the moon by the global ozone monitoring experiment: radiometric calibration and lunar albedo

    NARCIS (Netherlands)

    Dobber, M.R.; Goede, A.P.H.; Burrows, J.P.

    1998-01-01

    The Global Ozone Monitoring Experiment (GOME) is a new instrument, which was launched aboard the second European Remoting Sensing satellite ESA-ERS2 in 1995. For its long-term radiometric and spectral calibration the GOME observes the sun and less frequently the moon on a regular basis. These measur

  11. A prototype vector magnetic field monitoring system for a neutron electric dipole moment experiment

    CERN Document Server

    Nouri, N; Brown, M A; Carr, R; Filippone, B; Osthelder, C; Plaster, B; Slutsky, S; Swank, C

    2015-01-01

    We present results from a first demonstration of a magnetic field monitoring system for a neutron electric dipole moment experiment. The system is designed to reconstruct the vector components of the magnetic field in the interior measurement region solely from exterior measurements.

  12. Study for Reactor Monitoring using Anti-neutrino Detection in the Neos experiment

    Energy Technology Data Exchange (ETDEWEB)

    Han, Bo Young; Sun, Gwang Min [KAERI, Daejeon (Korea, Republic of); Jeon, Eun Ju [ISB, Daejeon (Korea, Republic of); and others

    2016-05-15

    In this study we describe a feasibility study of reactor monitoring using antineutrino detection in the Neutrino Experiment for Oscillation at Short baseline (NEOS) at Hanbit power plant. Recently, in the perspective of nonproliferation issues and misuse of nuclear energy as a fast-growing nuclear energy industry, the application of anti-neutrino measurement has been proposed and the feasibility studies has been carried out as a novel technology for monitoring the burning process of nuclear power reactor. The NEOS detector with 1000 L Gd-doped liquid scintillator was installed in tendon gallery at Hanbit power station unit 5 and has been collecting close to 2000 IBD events per day with the signal to noise ratio of ∼ 20. As a preliminary result, we demonstrate the possibility of monitoring nuclear power reactor with the IBD counting rate during reactor power ON, ramping up, and OFF.

  13. First Operating Experiences of Beam Position Monitors in the TESLA Test Facility Linac

    Science.gov (United States)

    Lorenz, R.; Sachwitz, M.; Schreiber, H. J.; Tonisch, F.; Castellano, M.; Patteri, P.; Tazzioli, F.; Catani, L.

    1997-05-01

    Different types of monitors where installed in the TESLA Test Facility Linac to measure the beam position. At each superconducting quadrupole, the transverse beam position will be measured with a resolution of better than 10 μm, using a cylindrical cavity excited in the TM_110-mode by an off-center beam. In addition, two 'warm' cavities working at room temperature were built for the Injector I and the Bunch Compressor. The amplitude of the TM_110-mode and its phase are measured in a homodyne receiver. For the experimental area, stripline monitors having a resolution of better than 100 μm were built, tested and installed. The averaged position of the whole bunch train of Injector I is measured in a narrowband receiver using the amplitude-to-phase conversion. This paper summarizes the designs, cold tests and first operating experiences of both monitor types.

  14. Gas Filled RF Resonator Hadron Beam Monitor for Intense Neutrino Beam Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Yonehara, Katsuya [Fermilab; Abrams, Robert [MUONS Inc., Batavia; Dinkel, Holly [U. Missouri, Columbia; Freemire, Ben [IIT, Chicago; Johnson, Rolland [MUONS Inc., Batavia; Kazakevich, Grigory [MUONS Inc., Batavia; Tollestrup, Alvin [Fermilab; Zwaska, Robert [Fermilab

    2016-06-01

    MW-class beam facilities are being considered all over the world to produce an intense neutrino beam for fundamental particle physics experiments. A radiation-robust beam monitor system is required to diagnose the primary and secondary beam qualities in high-radiation environments. We have proposed a novel gas-filled RF-resonator hadron beam monitor in which charged particles passing through the resonator produce ionized plasma that changes the permittivity of the gas. The sensitivity of the monitor has been evaluated in numerical simulation. A signal manipulation algorithm has been designed. A prototype system will be constructed and tested by using a proton beam at the MuCool Test Area at Fermilab.

  15. The Data Quality Monitoring Software for the CMS experiment at the LHC

    CERN Document Server

    Borrello, Laura

    2014-01-01

    The Data Quality Monitoring (DQM) Software is a central tool in the CMS experiment. Its flexibility allows for integration in several key environments Online, for real-time detector monitoring; Offline, for the final, fine-grained Data Certification; Release-Validation, to constantly validate the functionalities and the performance of the reconstruction software; in Monte Carlo productions.Since the end of data taking at a center of mass energy of 8 TeV, the environment in which the DQM lives has undergone fundamental changes. In turn, the DQM system has made significant upgrades in many areas to respond to not only the changes in infrastructure, but also the growing specialized needs of the collaboration with an emphasis on more sophisticated methods for evaluating dataquality, as well as advancing the DQM system to provide quality assessments of various Monte Carlo simulations versus data distributions, monitoring changes in physical effects due to modifications of algorithms or framework, and enabling reg...

  16. Data Quality Monitoring Framework for the ATLAS Experiment at the LHC

    CERN Document Server

    Corso-Radu, A; Hadavand, H; Kehoe, R; Hauschild, M; 15th IEEE Real Time Conference 2007

    2007-01-01

    Data Quality Monitoring (DQM) is an important and integral part of the data taking process of HEP experiments. DQM involves analysis of various monitoring data through user defined algorithms and relaying the summary of the analysis results while data is being processed. This approach is used in both online and offline environments of the experiment.When DQM occurs in the online environment it provides the shifter with live information about the run which can be used to overcome problems early on and help avoid taking faulty data. During the offline reconstruction more complex analysis of physics quantities are performed by DQM and the results are used to assess the quality of the reconstructed data. The ATLAS Data Quality Monitoring Framework (DQMF) is the software providing Data Quality Monitoring functionality in the online environment. The core part of the DQMF is designed to only have dependence on software which is common between online and offline (such as ROOT) and can therefore be used for the offlin...

  17. Research on simulation and experiment of noninvasive intracranial pressure monitoring based on acoustoelasticity effects.

    Science.gov (United States)

    Wu, Jun; He, Wei; Chen, Wei-Min; Zhu, Lian

    2013-01-01

    The real-time monitoring of intracranial pressure (ICP) is very important for craniocerebrally critically ill patients, but it is very difficult to realize long-time monitoring for the traditional invasive method, which very easily infects patients. Many noninvasive methods have emerged, but these have not been able to monitor ICP for long periods in real time, and they are not ready for clinical application. In order to realize long-time, online, real-time, noninvasive monitoring for ICP, a new method based on acoustoelasticity of ultrasound is herein proposed. Experimental models were devised to research the new method for experiment and simulation. Polymethyl methacrylate and hydrogel were adopted for the experiment, and their mechanical properties were very close to the real brain. A numerical solution for acoustoelasticity theory was acquired by simulating calculation based on a finite-element method. This was compared to the experimental value. The results showed a consistent match between theoretical solution and experimental value, with maximum error at most 5%. Thus, the effectiveness of the new method was verified. Theoretical and practical foundation is provided for this new method, and it could be used for animal experimentation or clinical testing in further research.

  18. Automated Grid Monitoring for the LHCb Experiment Through HammerCloud

    CERN Document Server

    Dice, Bradley

    2015-01-01

    The HammerCloud system is used by CERN IT to monitor the status of the Worldwide LHC Computing Grid (WLCG). HammerCloud automatically submits jobs to WLCG computing resources, closely replicating the workflow of Grid users (e.g. physicists analyzing data). This allows computation nodes and storage resources to be monitored, software to be tested (somewhat like continuous integration), and new sites to be stress tested with a heavy job load before commissioning. The HammerCloud system has been in use for ATLAS and CMS experiments for about five years. This summer's work involved porting the HammerCloud suite of tools to the LHCb experiment. The HammerCloud software runs functional tests and provides data visualizations. HammerCloud's LHCb variant is written in Python, using the Django web framework and Ganga/DIRAC for job management.

  19. Thermal and orbital analysis of Earth monitoring Sun-synchronous space experiments

    Science.gov (United States)

    Killough, Brian D.

    1990-01-01

    The fundamentals of an Earth monitoring Sun-synchronous orbit are presented. A Sun-synchronous Orbit Analysis Program (SOAP) was developed to calculate orbital parameters for an entire year. The output from this program provides the required input data for the TRASYS thermal radiation computer code, which in turn computes the infrared, solar and Earth albedo heat fluxes incident on a space experiment. Direct incident heat fluxes can be used as input to a generalized thermal analyzer program to size radiators and predict instrument operating temperatures. The SOAP computer code and its application to the thermal analysis methodology presented, should prove useful to the thermal engineer during the design phases of Earth monitoring Sun-synchronous space experiments.

  20. The radiation monitoring system for the LHC experiments and experimental areas

    CERN Document Server

    Ilgner, C

    2004-01-01

    With the high energies stored in the beams of the LHC, special attention needs to be paid to accident scenarios involving beam losses which may have an impact on the installed experiments. Among others, an unsynchronized beam abort and a D1 magnet failure are considered serious cases. According to simulations, the CMS inner tracker in such accident scenarios can be damaged by instantaneous rates which are many orders of magnitude above normal conditions. Investigations of synthetic diamond as a beam condition monitor sensor, capable of generating a fast beam dump signal, will be presented. Furthermore, a system to monitor the radiation fields in the experimental areas is being developed. It must function in the radiation fields inside and around the experiments, over a large dynamic range. Several new active and passive sensors, such as RadFET, OSL (Optically Stimulated Luminescence) sensors, p-i-n diodes, Polymer-Alanine Dosimeters and TLDs (Thermoluminescent Dosimeters) are under investigation. Recent resul...

  1. Integrating a project monitoring system into a public health network: experiences from Alive & Thrive Vietnam.

    Science.gov (United States)

    Tuan, Nguyen Thanh; Alayon, Silvia; Do, Tran Thanh; Ngan, Tran Thi; Hajeebhoy, Nemat

    2015-01-01

    Little information is available about how to build a monitoring system to measure the output of preventive nutrition interventions, such as counselling on infant and young child feeding. This paper describes the Alive & Thrive Vietnam (A&T) project experience in nesting a large-scale project monitoring system into the existing public health information system (e.g. using the system and resources), and in using monitoring data to strengthen service delivery in 15 provinces with A&T franchises. From January 2012 to April 2014, the 780 A&T franchises provided 1,700,000 counselling contacts (~3/4 by commune franchises). In commune franchises in April 2014, 80% of mothers who were pregnant or with children under two years old had been to the counselling service at least one time, and 87% of clients had been to the service earlier. Monitoring data are used to track the progress of the project, make decisions, provide background for a costing study and advocate for the integration of nutrition counselling indicators into the health information system nationwide. With careful attention to the needs of stakeholders at multiple levels, clear data quality assurance measures and strategic feedback mechanisms, it is feasible to monitor the scale-up of nutrition programmes through the existing routine health information system.

  2. Development of wall conditioning and impurity monitoring systems in Versatile Experiment Spherical Torus (VEST)

    Energy Technology Data Exchange (ETDEWEB)

    Lee, H.Y., E-mail: brbbebbero@snu.ac.kr [Seoul National University, Seoul (Korea, Republic of); Yang, J.; Kim, Y.G.; Yang, S.M.; Kim, Y.S.; Lee, K.H. [Seoul National University, Seoul (Korea, Republic of); An, Y.H. [National Fusion Research Institute, Daejon (Korea, Republic of); Chung, K.J.; Na, Y.S. [Seoul National University, Seoul (Korea, Republic of); Hwang, Y.S., E-mail: yhwang@snu.ac.kr [Seoul National University, Seoul (Korea, Republic of)

    2016-11-01

    Highlights: • The baking for partial wall heating and H{sub 2}/He GDC systems are developed in VEST. • The RGA and OES systems for monitoring impurities are constructed in VEST. • The partial baking and He GDC show limited effects on plasma characteristics. • H{sub 2} GDC above 4 h enables the longer plasma current duration up to ∼15 ms. • After H{sub 2} GDC, the discharge should be conducted within 3 h from treatment. - Abstract: Wall conditioning and impurity monitoring systems are developed in Versatile Experiment Spherical Torus (VEST). As a wall conditioning system, a baking system covering the vacuum vessel wall partially and a glow discharge cleaning (GDC) system using two electrodes with dc and 50 kHz power supplies are installed. The GDC system operates with hydrogen and helium gases for both chemical and physical desorption. The impurity monitoring system with residual gas analyzer (RGA), operating at <10{sup −5} Torr with a differential pumping system, is installed along with the optical emission spectroscopy (OES) system to monitor the hydrogen and impurity radiation lines. Effects of these wall conditioning techniques are investigated with the impurity monitoring system for ohmic discharges of VEST. The partial baking and He GDC show limited effects on plasma characteristics but sufficient H{sub 2} GDC above 4 h enables the longer plasma current duration up to ∼15 ms within 3 h from the end of treatment.

  3. Western corn rootworm: Experiments on the improvement of monitoring at low population densities

    Directory of Open Access Journals (Sweden)

    Acker, Melanie

    2014-02-01

    Full Text Available An efficient monitoring of the western corn rootworm (WCR Diabrotica virgifera virgifera LeConte, 1868 (Chrysomelidae, Coleoptera is the most important precondition for convenient measures of eradication or containment. This research project aimed to assess the monitoring methods, especially at low population densities as currently observed in Germany. For this purpose, large-scaled field trials were designed in Bavaria and Upper Austria. The studies focused on the catchability, costs and by-catches of the pheromone-trap PAL in comparison to other trap types. In another experiment, different allocations of PAL traps in the corn field were examined. Finally, traps and pheromones often remain unused at the end of a monitoring season. Therefore the catchability of stored PAL traps in the next monitoring period was investigated. PAL traps captured beetles constantly on a high level. In addition to its low costs and reduced by-catches, the trap type PAL is recommended for the monitoring of western corn rootworm in Germany. Changes in locations of PAL traps within the corn field did not result in a higher catchability. At present, traps are placed in the fifth to eighth corn row and the results confirm to maintain this practice. Comparing the catchability of stored PAL traps to the catchability of fresh traps, stored traps resulted in comparable catches than fresh ones. It is concluded that traps and pheromones, which were stored dark and deep-frozen, can be used in the next season.

  4. HappyFace as a generic monitoring tool for HEP experiments

    Science.gov (United States)

    Kawamura, Gen; Magradze, Erekle; Musheghyan, Haykuhi; Quadt, Arnulf; Rzehorz, Gerhard

    2015-12-01

    The importance of monitoring on HEP grid computing systems is growing due to a significant increase in their complexity. Computer scientists and administrators have been studying and building effective ways to gather information on and clarify a status of each local grid infrastructure. The HappyFace project aims at making the above-mentioned workflow possible. It aggregates, processes and stores the information and the status of different HEP monitoring resources into the common database of HappyFace. The system displays the information and the status through a single interface. However, this model of HappyFace relied on the monitoring resources which are always under development in the HEP experiments. Consequently, HappyFace needed to have direct access methods to the grid application and grid service layers in the different HEP grid systems. To cope with this issue, we use a reliable HEP software repository, the CernVM File System. We propose a new implementation and an architecture of HappyFace, the so-called grid-enabled HappyFace. It allows its basic framework to connect directly to the grid user applications and the grid collective services, without involving the monitoring resources in the HEP grid systems. This approach gives HappyFace several advantages: Portability, to provide an independent and generic monitoring system among the HEP grid systems. Eunctionality, to allow users to perform various diagnostic tools in the individual HEP grid systems and grid sites. Elexibility, to make HappyFace beneficial and open for the various distributed grid computing environments. Different grid-enabled modules, to connect to the Ganga job monitoring system and to check the performance of grid transfers among the grid sites, have been implemented. The new HappyFace system has been successfully integrated and now it displays the information and the status of both the monitoring resources and the direct access to the grid user applications and the grid collective

  5. Activity Concentration Monitoring for Alpha Radioactive Aerosol in CRARL after Reprocessing Experiments

    Institute of Scientific and Technical Information of China (English)

    WANG; Xiang-li; LIU; Ning; WANG; Xiao-rong; BAI; Yang; JIAO; Xiao-yan; XU; Xin; MA; Hao-ran

    2015-01-01

    The activity concentration for alpha radioactive aerosol in CRARL after reprocessing experiments was analyzed.Through the decay method of activity concentration monitoring,the processed result shows the background is 3.05×10-3 s-1,σ(0)=2.25×10-3,LC=2.33×10-3 Bq/m3,LD=4.66×10-3 Bq/m3.The result indicated

  6. Fission Product Monitoring of TRISO Coated Fuel For The Advanced Gas Reactor -1 Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Dawn M. Scates; John (Jack) K Hartwell; John B. Walter

    2008-09-01

    The US Department of Energy has embarked on a series of tests of TRISO-coated particle reactor fuel intended for use in the Very High Temperature Reactor (VHTR) as part of the Advanced Gas Reactor (AGR) program. The AGR-1 TRISO fuel experiment, currently underway, is the first in a series of eight fuel tests planned for irradiation in the Advanced Test Reactor (ATR) located at the Idaho National Laboratory (INL). The AGR-1 experiment reached a peak compact averaged burn up of 9% FIMA with no known TRISO fuel particle failures in March 2008. The burnup goal for the majority of the fuel compacts is to have a compact averaged burnup greater than 18% FIMA and a minimum compact averaged burnup of 14% FIMA. At the INL the TRISO fuel in the AGR-1 experiment is closely monitored while it is being irradiated in the ATR. The effluent monitoring system used for the AGR-1 fuel is the Fission Product Monitoring System (FPMS). The FPMS is a valuable tool that provides near real-time data indicative of the AGR-1 test fuel performance and incorporates both high-purity germanium (HPGe) gamma-ray spectrometers and sodium iodide [NaI(Tl)] scintillation detector-based gross radiation monitors. To quantify the fuel performance, release-to-birth ratios (R/B’s) of radioactive fission gases are computed. The gamma-ray spectra acquired by the AGR-1 FPMS are analyzed and used to determine the released activities of specific fission gases, while a dedicated detector provides near-real time count rate information. Isotopic build up and depletion calculations provide the associated isotopic birth rates. This paper highlights the features of the FPMS, encompassing the equipment, methods and measures that enable the calculation of the release-to-birth ratios. Some preliminary results from the AGR-1 experiment are also presented.

  7. Production and test of monitored drift tubes for the muon spectrometer of the ATLAS experiment

    CERN Document Server

    Aprile, A; Campagna, A; Capua, M; Cuce, D; Ferraro, E; Lamanna, E; La Rotonda, L; Meoni, E; Pellegrino, F; Romano, V; Schioppa, M; Susinno, G; Turco, R P; Vena, R

    2002-01-01

    ATLAS is one of the two general-purpose experiments being built for the Large Hadron Collider at CERN. Its muon spectrometer consists of very high-precision chambers made of drift tubes. Up to now, more than 5000 monitored drift tubes (MDTs) have been constructed and tested at the University of Calabria, Italy, for ATLAS barrel system chambers of the muon detector. This paper reports the critical MDT assembly techniques in detail, including the automatic electronics system and data acquisition system. The extensive tests performed on individual drift tubes and the first results and experience are also reported. (5 refs).

  8. Partitioning,Automation and Error Recovery in the Control and Monitoring System of an LHC Experiment

    Institute of Scientific and Technical Information of China (English)

    C.Gaspar

    2001-01-01

    The Joint Controls Project(JCOP)is a collaboration between CERN and the four LHC experiments to find and implement common solutions for their control and monitoring systems.As part of this project and Architecture Working Group was set up in order to study the requirements and devise an architectural model that would suit the four experiments.Many issues were studied by this working group:Alarm handling,Access Control,Hierarchical Control,etc.This paper will report on the specific issue of hierarchical control and in particular partitioning,automation and error recovery.

  9. Design and experiments for the waveguide to coaxial cable adapter of a cavity beam position monitor

    Institute of Scientific and Technical Information of China (English)

    LI Xiang; ZHENG Shu-Xin

    2011-01-01

    The waveguide to coaxial cable adapter is very important to the cavity beam position monitor(CBPM)because it determines how much of the energy in the cavity could be coupled outside.In this paper,the waveguide to coaxial cable adapter of a CBPM is designed and experiments are conducted.The curve shapes of experiments and simulations are very similar and the difference in reflection is less than 0.1.This progress provides a reliable method for designing the adapter.

  10. The problem involving OPMEs and the health plans contracts: outline and analysis of the issue

    Directory of Open Access Journals (Sweden)

    MARTINS, Paulo Roberto do Nascimento

    2016-06-01

    Full Text Available This paper has as its scope to introduce and analyze some of most polemic issues involving the indications of OPMEs within the health plans contracts. During the text, are exhibited normative elements related to this context, as well as some judicial decisions concerning this matter, aiming to defend, with reasonable grounds, that the indication of the patient’s doctor, when choosing prostheses and orthoses, cannot be taken as the unique nor necessarily the best opinion, given the existence of other interests, beyond the patient’s health, that are often in stake as well. At the end, it is explained that, in light of the currently existing regulation in Brazil, in the context of the supplementary health system, to the patient’s doctor is given the authority only to indicate the characteristics of the materials needed, leaving it to the health plans Operators the choice of the brand and the manufacturer. As long as the courts deny these rules, this serious problem will not be solved.

  11. Participatory Air Monitoring in the Midst of Uncertainty: Residents’ Experiences with the Speck Sensor

    Directory of Open Access Journals (Sweden)

    Jacob Robert Matz

    2017-09-01

    Full Text Available How do participants engage in at-home air monitoring in the midst of uncertain exposures to airborne emissions associated with unconventional natural gas development (UNGD activities? We investigate residents’ experiences with the “Speck” particulate matter sensor with an emerging environmental health resource center called the Southwest Pennsylvania Environmental Health Project (EHP. In response to the gaps in knowledge about the health impacts of UNGD and the growth citizen science tools, participatory environmental monitoring (PEM projects have taken off in shale gas communities. Using interview and survey data from residents, advocates, and activists we show that residents use the Speck as: 1 “environmental health thermometers” to make real time decisions based on readings; 2 real-time tools of exposure-validation to immediately validate or invalidate suspicions of exposure; 3 “epistemic objects” or tools manipulated in exploratory ways to understand their efficacy in monitoring UNGD; and 4 passively by those who chose to rarely interact with the monitors and rather waited for overall analysis of results. While PEM’s have been critiqued for potentially passing the burden of monitoring onto communities, our research shows PEM, when connected with research and public health organizations like EHP, can both empower individuals by increasing their perceived and actual agency and build collective knowledge by producing novel scientific findings. The modes of participation identified here each imply individual and community-level outcomes. When connected with an organization like EHP, Speck monitoring enabled participating individual the latitude to develop their own research and make immediate use of the data, while also creating data useful for aggregated scientific analyses that provoke new questions about the health risks associated with UNGD.

  12. A soil flowing characteristics monitoring method in planetary drilling and coring verification experiments

    Science.gov (United States)

    Tang, Junyue; Quan, Qiquan; Jiang, Shengyuan; Chen, Chongbin; Yuan, Fengpei; Deng, Zongquan

    2017-03-01

    Some type of piercing into the subsurface formation is required in future planetary explorations to enhance the understanding of early stars' geological evolution and the origin of life. Compared with other technical methods, drilling & coring, only utilizing the compound locomotion of rotation and penetration, can sample the subsurface soil relatively efficient and convenient. However, given the uncertain mechanical properties of planetary soil, drilling state signals should be monitored online to improve the robustness of drilling system and avoid potential drilling faults. Since the flowing characteristics of interacted soil, such as removal volume, coring height, removal velocity and accumulation angle, directly reveal the drilling conditions, they are enhancing resources to comprehend the sampling phenomenon and can be used to help control the drill tool. This paper proposed a novel soil flowing characteristics (SFC) monitoring method by applying an industrial camera to record the flowing characteristics of removed cuttings and by utilizing an ultrasonic sensor into the hollow auger to monitor the sampled core. Experiments in one typical lunar regolith simulant indicate that the monitored SFC accurately reflects the interaction between the drill tool and soil.

  13. TIPEX (Tropical Indo-Pacific water transport and ecosystem monitoring EXperiment Program

    Directory of Open Access Journals (Sweden)

    Dongchull Jeon

    2013-09-01

    Full Text Available One of the factors influencing the climate around Korea is the oceanic-atmospheric variability in the tropical region between the eastern Indian and the western Pacific Oceans. Lack of knowledge about the air-sea interaction in the tropical Indo-Pacific region continues to make it problematic forecasting the ocean climate in the East Asia. The ‘Tropical Indo-Pacific water transport and ecosystem monitoring EXperiment (TIPEX’ is a program for monitoring the ocean circulation variability between Pacific and Indian Oceans and for improving the accuracy of future climate forecasting. The main goal of the TIPEX program is to quantify the climate and ocean circulation change between the Indian and the Pacific Oceans. The contents of the program are 1 to observe the mixing process of different water masses and water transport in the eastern Indian and the western Pacific, 2 to understand the large-scale oceanic-climatic variation including El Niño-Southern Oscillation (ENSO/Warm Pool/Pacific Decadal Oscillation (PDO/Indian Ocean Dipole (IOD, and 3 to monitor the biogeochemical processes, material flux, and biological changes due to the climate change. In order to effectively carry out the monitoring program, close international cooperation and the proper co-work sharing of tasks between China, Japan, Indonesia, and India as well as USA is required.

  14. The Mexican experience in monitoring and evaluation of public policies addressing social determinants of health.

    Science.gov (United States)

    Valle, Adolfo Martinez

    2016-01-01

    Monitoring and evaluation (M&E) have gradually become important and regular components of the policy-making process in Mexico since, and even before, the World Health Organization (WHO) Commission on Social Determinants of Health (CSDH) called for interventions and policies aimed at tackling the social determinants of health (SDH). This paper presents two case studies to show how public policies addressing the SDH have been monitored and evaluated in Mexico using reliable, valid, and complete information, which is not regularly available. Prospera, for example, evaluated programs seeking to improve the living conditions of families in extreme poverty in terms of direct effects on health, nutrition, education and income. Monitoring of Prospera's implementation has also helped policy-makers identify windows of opportunity to improve the design and operation of the program. Seguro Popular has monitored the reduction of health inequalities and inequities evaluated the positive effects of providing financial protection to its target population. Useful and sound evidence of the impact of programs such as Progresa and Seguro Popular plus legal mandates, and a regulatory evaluation agency, the National Council for Social Development Policy Evaluation, have been fundamental to institutionalizing M&E in Mexico. The Mexican experience may provide useful lessons for other countries facing the challenge of institutionalizing the M&E of public policy processes to assess the effects of SDH as recommended by the WHO CSDH.

  15. The Mexican experience in monitoring and evaluation of public policies addressing social determinants of health

    Directory of Open Access Journals (Sweden)

    Adolfo Martinez Valle

    2016-02-01

    Full Text Available Monitoring and evaluation (M&E have gradually become important and regular components of the policy-making process in Mexico since, and even before, the World Health Organization (WHO Commission on Social Determinants of Health (CSDH called for interventions and policies aimed at tackling the social determinants of health (SDH. This paper presents two case studies to show how public policies addressing the SDH have been monitored and evaluated in Mexico using reliable, valid, and complete information, which is not regularly available. Prospera, for example, evaluated programs seeking to improve the living conditions of families in extreme poverty in terms of direct effects on health, nutrition, education and income. Monitoring of Prospera's implementation has also helped policy-makers identify windows of opportunity to improve the design and operation of the program. Seguro Popular has monitored the reduction of health inequalities and inequities evaluated the positive effects of providing financial protection to its target population. Useful and sound evidence of the impact of programs such as Progresa and Seguro Popular plus legal mandates, and a regulatory evaluation agency, the National Council for Social Development Policy Evaluation, have been fundamental to institutionalizing M&E in Mexico. The Mexican experience may provide useful lessons for other countries facing the challenge of institutionalizing the M&E of public policy processes to assess the effects of SDH as recommended by the WHO CSDH.

  16. LCD Monitors as an Alternative for Precision Demanding Visual Psychophysical Experiments.

    Science.gov (United States)

    Bognár, Anna; Csibri, Péter; András, Csaba Márk; Sáry, Gyula

    2016-09-01

    Precise timing and presentation of stimuli is critical in vision research, still, the limiting factor in successful recognition is often the monitor itself that is used to present the stimuli. The most widespread method is the use of monitors controlled by personal computers. Traditionally, most experiments used cathode-ray tubes but they are more and more difficult to access, and instead, liquid-crystal displays are getting more and more popular. The two types have fundamentally different working principles and limitations in displaying the stimulus.In our experiments, the temporal precision of the stimulus presentation was in focus. We investigated whether liquid-crystal displays, which are not considered to be fit to display fast successive stimuli, can represent an alternative choice for cathode-ray tubes. We used the double flash and the flicker illusion to compare the technical capabilities of the two monitor types. These illusions not only do require a precise timing but also a very short exposure to the stimuli. At the same time, the interstimulus interval is also of extreme importance. In addition, these illusions require peripheral stimulation of the retina, which is more sensitive to the temporal aspects of the visual stimulus. On the basis of previous studies and our own psychophysical results, we suggest that liquid-crystal displays might be a good alternative for precise, frame-to-frame stimulus presentation even if parts of the stimuli are projected on the peripheral retina.

  17. Web-based distributed System for TOF Experiment Cooling Plant Monitoring

    CERN Document Server

    Blanc, D

    2001-01-01

    This paper discusses the monitoring and control system for an automated cooling process. The plant is located in an experiment environment and with some distance between the principal components of the system namely the cooling station of the lead target temperature measurements and the TOF experiment control room. TOF experiment operators interact from a SCADA supervisory station through the TCP-IP Ethernet communication channel with the cooling plant. The main issue concerns the degree of automation given to the plant and the SCADA station to greatly ease the TOF control room operation. Another important issue is the real need for TOF physicists and vacuum technicians to access specific operational information in their respective process systems. In this way the availability of the Wizcon® Web-based SCADA applications, which reside on standard Windows NT Web servers, deliver real-time access and historical data to the different applications. The various authorised users can interact with their own applicat...

  18. Experimental demonstration of adaptive digital monitoring and compensation of chromatic dispersion for coherent DP-QPSK receiver

    DEFF Research Database (Denmark)

    Borkowski, Robert; Zhang, Xu; Zibar, Darko;

    2011-01-01

    We experimentally demonstrate a digital signal processing (DSP)-based optical performance monitoring (OPM) algorithm for inservice monitoring of chromatic dispersion (CD) in coherent transport networks. Dispersion accumulated in 40 Gbit/s QPSK signal after 80 km of fiber transmission is successfu...

  19. Monitoring complex detectors: the uSOP approach in the Belle II experiment

    Science.gov (United States)

    Di Capua, F.; Aloisio, A.; Ameli, F.; Anastasio, A.; Branchini, P.; Giordano, R.; Izzo, V.; Tortone, G.

    2017-08-01

    uSOP is a general purpose single board computer designed for deep embedded applications in control and monitoring of detectors, sensors and complex laboratory equipments. It is based on the AM3358 (1 GHz ARM Cortex A8 processor), equipped with USB and Ethernet interfaces. On-board RAM and solid state storage allows hosting a full LINUX distribution. In this paper we discuss the main aspects of the hardware and software design and the expandable peripheral architecture built around field busses. We report on several applications of uSOP system in the Belle II experiment, presently under construction at KEK (Tsukuba, Japan). In particular we will report the deployment of uSOP in the monitoring system framework of the endcap electromagnetic calorimeter.

  20. Meshat: Monitoring and Experience Sharing Tool for Project-Based Learning

    CERN Document Server

    Michel, Christine

    2009-01-01

    Our work aims at studying tools offered to learners and tutors involved in face-to-face or blended project-based learning activities. To understand better the needs and expectations of each actor, we are especially interested in the specific case of project management training. The results of a course observation show that the lack of monitoring and expertise transfer tools involves important dysfunctions in the course organisation and therefore dissatisfaction for tutors and students (in particular about the acquisition of knowledge and expertise). So as to solve this problem, we propose a personalised platform (according to the actor: project group, student or tutor) which gives information to monitor activities and supports the acquisition and transfer of expertise. This platform is meant for the complex educational context of project-based learning. Indeed, as for the majority of project-based learning activities, the articulation conceptualisation-experiment is an important part of the process. The origi...

  1. Challenges and Opportunities for Developing Capacity in Earth Observations for Agricultural Monitoring: The GEOGLAM Experience

    Science.gov (United States)

    Whitcraft, A. K.; Di Bella, C. M.; Becker Reshef, I.; Deshayes, M.; Justice, C. O.

    2015-12-01

    Since 2011, the Group on Earth Observations Global Agricultural Monitoring (GEOGLAM) Initiative has been working to strengthen the international community's capacity to use Earth observation (EO) data to derive timely, accurate, and transparent information on agriculture, with the goals of reducing market volatility and promoting food security. GEOGLAM aims to develop capacity for EO-based agricultural monitoring at multiple scales, from national to regional to global. This is accomplished through training workshops, developing and transferring of best-practices, establishing networks of broad and sustainable institutional support, and designing or adapting tools and methodologies to fit localized contexts. Over the past four years, capacity development activities in the context of GEOGLAM have spanned all agriculture-containing continents, with much more work to be done, particularly in the domains of promoting access to large, computationally-costly datasets. This talk will detail GEOGLAM's experiences, challenges, and opportunities surrounding building international collaboration, ensuring institutional buy-in, and developing sustainable programs.

  2. Rotating Dual-Wire Beam Profile Monitor Optimized for Use in Merged-Beams Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Seely, D. G. [Albion College; Bruhns, H. [Columbia University; Savin, D. W. [Columbia University; Kvale, Thomas Jay [University of Toledo, Toledo, OH; Galutschek, Ernst [ORNL; Aliabadi, Habib [ORNL; Havener, Charles C [ORNL

    2008-01-01

    A rotating dual-wire beam proile monitor based upon a modified National Electrostatics Corporation Model BPM80 beam profile monitor is described. The device can measure beam profiles in two perpendicular directions (horizontal and vertical) in each of two pseudoplanes that are situated along the beam axis and are separated by a distance of 6.0 cm. The output signal from the device is analyzed in real time to yield horizontal and vertical beam profiles and to calculate the divergence of a particle beam that traverses the device. This set-up is well-suited for merged-beams experiments where one beam is tuned to saved profiles from a second beam in order to minimize the merge angle and beam divergences while maximizing the beam-beam overlaps.

  3. Rotating dual-wire beam profile monitor optimized for use in merged-beams experiments

    Energy Technology Data Exchange (ETDEWEB)

    Seely, D.G. [Department of Physics, Albion College, Albion, MI 49224-1831 (United States)], E-mail: dseely@albion.edu; Bruhns, H.; Savin, D.W. [Columbia Astrophysics Laboratory, Columbia University, New York, NY 10027-6606 (United States); Kvale, T.J. [Department of Physics and Astronomy, University of Toledo, Toledo, OH 43606-3390 (United States); Galutschek, E.; Aliabadi, H.; Havener, C.C. [Physics Division, Oak Ridge National Laboratory, Oak Ridge, TN 37831-6372 (United States)

    2008-01-21

    A rotating dual-wire beam profile monitor based upon a National Electrostatics Corporation Model BPM80 beam profile monitor is described. The device can measure beam profiles in two perpendicular directions (horizontal and vertical) in each of two pseudoplanes that are situated along the beam axis and are separated by a distance of 5.4 cm. The output signal from the device is analyzed in real time to yield horizontal and vertical beam profiles and to calculate the divergence of a particle beam that traverses the device. This set-up is well-suited for merged-beams experiments where one beam is tuned to saved profiles from a second beam in order to minimize the merge angle and beam divergences while maximizing the beam-beam overlaps.

  4. Research on simulation and experiment of noninvasive intracranial pressure monitoring based on acoustoelasticity effects

    Directory of Open Access Journals (Sweden)

    Wu J

    2013-08-01

    Full Text Available Jun Wu1, Wei He2, Wei-min Chen1, Lian Zhu21Key Laboratory of Optoelectronic Technology and Systems, 2State Key Laboratory of Power Transmission Equipment and System Security and New Technology, Chongqing University, Chongqing, People’s Republic of ChinaAbstract: The real-time monitoring of intracranial pressure (ICP is very important for craniocerebrally critically ill patients, but it is very difficult to realize long-time monitoring for the traditional invasive method, which very easily infects patients. Many noninvasive methods have emerged, but these have not been able to monitor ICP for long periods in real time, and they are not ready for clinical application. In order to realize long-time, online, real-time, noninvasive monitoring for ICP, a new method based on acoustoelasticity of ultrasound is herein proposed. Experimental models were devised to research the new method for experiment and simulation. Polymethyl methacrylate and hydrogel were adopted for the experiment, and their mechanical properties were very close to the real brain. A numerical solution for acoustoelasticity theory was acquired by simulating calculation based on a finite-element method. This was compared to the experimental value. The results showed a consistent match between theoretical solution and experimental value, with maximum error at most 5%. Thus, the effectiveness of the new method was verified. Theoretical and practical foundation is provided for this new method, and it could be used for animal experimentation or clinical testing in further research.Keywords: medical instruments, noninvasive, intracranial pressure, ultrasonic, acoustoelasticity, biomechanics

  5. Analog-experiment analysis of ash-deposition monitoring model of boiler economizers in power plants

    Institute of Scientific and Technical Information of China (English)

    CHENG Wei-liang; XIA Guo-dong; XU Shou-chen

    2005-01-01

    Ash deposition is a form of particulate fouling, and appears usually in boiler economizers. The ash deposition increases capital expenditure, energy input and maintenance costs. An analog experiment for monitoring ash deposition was performed from the analogous objective of a 410 t/h boiler economizer to verify the rationality and reliability of the ash-deposition-monitoring model presented in order to increase the security and economy in economizer running. The analog experiment platform is a tube-shell exchanger that conforms well to the conditions of a self-modeling area. The analog flue gas in the shell side is the heated air mixed with ash,and in the tube side the fluid is water heated by the flue gas. The fluid state in the water side and the flue gas side follows the second self-modeling area. A 4-factor-3 level orthogonal table was used to schedule 9 operation conditions of orthogonal experiment, with the 4 factors being heat power, flue gas velocity, ashes grain diameter and adding ashes quantity while the three levels are different values due to different position classes in every factor. The ash deposition thermal resistances is calculated by the model with the measure parameters of temperature and pressure drop. It shows that the values of the ash deposition thermal resistances gradually increase up to a stable state. And the experimental results are reliable by F testing method at α = 0. 001. Therefore, the model can be applied in online monitoring of ash deposition in a boiler economizers in power plants and provides scientific decision on ash deposition prediction and sootblowing.

  6. Experiences and recommendations in deploying a real-time, water quality monitoring system

    Science.gov (United States)

    O'Flynn, B.; Regan, F.; Lawlor, A.; Wallace, J.; Torres, J.; O'Mathuna, C.

    2010-12-01

    Monitoring of water quality at a river basin level to meet the requirements of the Water Framework Directive (WFD) using conventional sampling and laboratory-based techniques poses a significant financial burden. Wireless sensing systems offer the potential to reduce these costs considerably, as well as provide more useful, continuous monitoring capabilities by giving an accurate idea of the changing environmental and water quality in real time. It is unlikely that the traditional spot/grab sampling will provide a reasonable estimate of the true maximum and/or mean concentration for a particular physicochemical variable in a water body with marked temporal variability. When persistent fluctuations occur, it is likely only to be detected through continuous measurements, which have the capability of detecting sporadic peaks of concentration. Thus, in situ sensors capable of continuous sampling of parameters required under the WFD would therefore provide more up-to-date information, cut monitoring costs and provide better coverage representing long-term trends in fluctuations of pollutant concentrations. DEPLOY is a technology demonstration project, which began planning and station selection and design in August 2008 aiming to show how state-of-the-art technology could be implemented for cost-effective, continuous and real-time monitoring of a river catchment. The DEPLOY project is seen as an important building block in the realization of a wide area autonomous network of sensors capable of monitoring the spatial and temporal distribution of important water quality and environmental target parameters. The demonstration sites chosen are based in the River Lee, which flows through Ireland's second largest city, Cork, and were designed to include monitoring stations in five zones considered typical of significant river systems--these monitor water quality parameters such as pH, temperature, depth, conductivity, turbidity and dissolved oxygen. Over one million data points

  7. Sleep-monitoring, experiment M133. [electronic recording system for automatic analysis of human sleep patterns

    Science.gov (United States)

    Frost, J. D., Jr.; Salamy, J. G.

    1973-01-01

    The Skylab sleep-monitoring experiment simulated the timelines and environment expected during a 56-day Skylab mission. Two crewmembers utilized the data acquisition and analysis hardware, and their sleep characteristics were studied in an online fashion during a number of all night recording sessions. Comparison of the results of online automatic analysis with those of postmission visual data analysis was favorable, confirming the feasibility of obtaining reliable objective information concerning sleep characteristics during the Skylab missions. One crewmember exhibited definite changes in certain sleep characteristics (e.g., increased sleep latency, increased time Awake during first third of night, and decreased total sleep time) during the mission.

  8. Monitoring and enforcement of environmental regulations. Lessons from a natural field experiment in Norway

    Energy Technology Data Exchange (ETDEWEB)

    Telle, Kjetil

    2012-07-01

    Relying on a small natural field experiment with random assignment of treatments, I estimate effects of three core elements of most monitoring and enforcement practices: self-reporting, audit frequency and specific deterrence. I find evidence of evasive reporting of violations in self-audits, as more violations are detected in on-site audits than in self-audits. Announcing the increased audit frequency has no effect on compliance, but an audit raises the firm's subsequent compliance substantially.(Author)

  9. The NASA Real Time Mission Monitor - A Situational Awareness Tool for Conducting Tropical Cyclone Field Experiments

    Science.gov (United States)

    Goodman, Michael; Blakeslee, Richard; Hall, John; Parker, Philip; He, Yubin

    2008-01-01

    The NASA Real Time Mission Monitor (RTMM) is a situational awareness tool that integrates satellite, aircraft state information, airborne and surface instruments, and weather state data in to a single visualization package for real time field experiment management. RTMM optimizes science and logistic decision-making during field experiments by presenting timely data and graphics to the users to improve real time situational awareness of the experiment's assets. The RTMM is proven in the field as it supported program managers, scientists, and aircraft personnel during the NASA African Monsoon Multidisciplinary Analyses (investigated African easterly waves and Tropical Storm Debby and Helene) during August-September 2006 in Cape Verde, the Tropical Composition, Cloud and Climate Coupling experiment during July-August 2007 in Costa Rica, and the Hurricane Aerosonde mission into Hurricane Noel in 2-3 November 2007. The integration and delivery of this information is made possible through data acquisition systems, network communication links, and network server resources built and managed by collaborators at NASA Marshall Space Flight Center (MSFC) and Dryden Flight Research Center (DFRC). RTMM is evolving towards a more flexible and dynamic combination of sensor ingest, network computing, and decision-making activities through the use of a service oriented architecture based on community standards and protocols. Each field experiment presents unique challenges and opportunities for advancing the functionality of RTMM. A description of RTMM, the missions it has supported, and its new features that are under development will be presented.

  10. A radiation belt monitor for the High Energy Transient Experiment Satellite

    Science.gov (United States)

    Lo, D. H.; Wenzel, K. W.; Petrasso, R. D.; Prigozhin, G. Y.; Doty, J.; Ricker, G.

    1993-01-01

    A Radiation Belt Monitor (RBM) sensitive to protons and electrons with energy approximately greater than 0.5 MeV has been designed for the High Energy Transient Experiment (HETE) satellite in order to: first, control the on-off configuration of the experiments (i.e. those susceptible to proton damage); and second, to indicate the presence of proton and/or electron events that could masquerade as legitimate high energy photon events. One of the two RBM channels has an enhanced sensitivity to electrons. Each channel of the RBM, based on a PIN silicon diode, requires a typical power of 6 milliwatts. Tests have been performed with protons with energies from approximately 0.1 to 2.5 MeV (generated by a Cockcroft-Walton linear accelerator via the d(d,p)t reaction), and with electrons with energies up to 1 MeV (from a 1.0 microcurie Bi-207 source).

  11. Experiments on exploring and monitoring landslip-mass using geoelectric resistivity observations

    Institute of Scientific and Technical Information of China (English)

    AN Jin-zhen; ZHOU Ping-gen; MA Mai-ning; CHEN Feng; DONG Ying; ZHONG Pei-lin

    2008-01-01

    In the experiments, a high-density resistivity method is used to explore the electric structure of landslip mass, and a resistivity-changing anisotropy method is used to monitor the orientation and speed of main fracture extending of landslip mass. The results are as follows. ① The exploring experiments have verified a part of creep deformation borderline, the depth and thickness of groundwater horizon, and the property of superstrata in the landslip mass investigated formerly, which have proved that the landslip belts contain rich groundwater; ② The main fracture extending orien-tation inferred from the resistivity-changing anisotropy accords with the strike of fracture belt of landslip mass de-duced from GPS displacement. Moreover, the changing rates of resistivity-changing anisotropy coefficient matches with the changing speeds of deep displacement of landslip mass were measured by suing clinometer in the bore-hole.

  12. HappyFace as a monitoring tool for the ATLAS experiment

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00367045; Yahyapour, Ramin

    The importance of monitoring on HEP grid computing systems is growing due to a significant increase in their complexity. Computer scientists and administrators have been studying and building effective ways to gather information on and clarify a status of each local grid infrastructure. The HappyFace project aims at making the above-mentioned workflow possible. It aggregates, processes and stores the informa- tion and the status of different HEP monitoring resources into the common database of HappyFace. The system displays the information and the status through a single interface. However, this model of HappyFace relied on the monitoring resources which are al- ways under development in the HEP experiments. Consequently, HappyFace needed to have direct access methods to the grid application and grid service layers in the dif- ferent HEP grid systems. To cope with this issue, we use a reliable HEP software repos- itory, the CernVM File System. We propose a new implementation and an architecture of HappyFace, ...

  13. floodX: urban flash flood experiments monitored with conventional and alternative sensors

    Science.gov (United States)

    Moy de Vitry, Matthew; Dicht, Simon; Leitão, João P.

    2017-09-01

    The data sets described in this paper provide a basis for developing and testing new methods for monitoring and modelling urban pluvial flash floods. Pluvial flash floods are a growing hazard to property and inhabitants' well-being in urban areas. However, the lack of appropriate data collection methods is often cited as an impediment for reliable flood modelling, thereby hindering the improvement of flood risk mapping and early warning systems. The potential of surveillance infrastructure and social media is starting to draw attention for this purpose. In the floodX project, 22 controlled urban flash floods were generated in a flood response training facility and monitored with state-of-the-art sensors as well as standard surveillance cameras. With these data, it is possible to explore the use of video data and computer vision for urban flood monitoring and modelling. The floodX project stands out as the largest documented flood experiment of its kind, providing both conventional measurements and video data in parallel and at high temporal resolution. The data set used in this paper is available at https://doi.org/10.5281/zenodo.830513.

  14. Initial experience with personal digital assistant-based reflectance photoplethysmograph for free tissue transfer monitoring.

    Science.gov (United States)

    Stack, Brendan C; Futran, Neal D; Zang, Billy; Scharf, John E

    2003-08-01

    Improved microsurgical technique has resulted in a high percentage of successful free tissue transfers. When a tissue transfer fails in the head and neck, however, the results are orocutaneous fistulas, carotid artery exposure, and deformity that adds morbidity, expense, and may delay adjuvant therapy. Postoperative monitoring of tissue perfusion can detect early problems in free tissue transfer that may allow for early intervention and salvage. The authors have demonstrated that reflectance photoplethysmography can detect perfusion changes in free tissue transfer within 5 minutes of a pedicle "insult" intraoperatively. Normative data for viable flaps from various donor sites have been established. The authors now report their initial experience with a newly developed reflectance photoplethysmograph based on a hand-held computer for routine clinical use. Their results are compared with a conventional surveillance protocol that included observation, bleeding to pin prick, and bedside duplex scanning of the vascular pedicle. In a series of 30 free tissue transfers (29 patients), there was one ischemic event (skin paddle loss only), which was detected by the monitor. The monitor was able to predict correctly (one flap) survival of a free tissue transfer even when duplex ultrasonic data were indicative of an absence of perfusion. Personal digital assistant-based photoplethysmography appears to be a promising device for bedside diagnosis of free tissue transfer viability or ischemia.

  15. Commissioning experience and first results from the new SLS beam size monitor

    CERN Document Server

    Schlott, V; Saa Hernandez, A; Streun, A; Andersson, A; Breunlin, J; Milas, N

    2013-01-01

    In the context of the TIARA work package “SLS vertical emittance tuning” (SVET), an extremely small vertical beam size of 3.6 $\\mu$m, corresponding to a vertical emittance of 0.9 pm, was verified using an optical monitor based on imaging of $\\pi$-polarized light. Since the existing beam size monitor reached its limit of resolution, a new monitor beam line was designed and installed at the 08BD bending magnet of the Swiss Light Source (SLS) storage ring. Larger magnification and operation at shorter wavelength provide improved spatial resolution. Reflective optics enables convenient switching between different wavelengths. An optical table is located in a hutch outside the storage ring tunnel to provide access during operation. Movable obstacles in the beam path create interference patterns and thus provide redundancy of model based analysis of the images. In this paper we report on our commissioning experience and provide a comparison of the different measurement methods at different wavelengths.

  16. Geophysical Monitoring of Active Infiltration Experiments for Recharge Estimation: Gains and Pains

    Science.gov (United States)

    Noell, U.; Lamparter, A.; Houben, G.; Koeniger, P.; Stoeckl, L.; Guenther, T.

    2014-12-01

    Drinking water supply on the island of Langeoog, North Sea, solely depends on groundwater from a freshwater lens. The correct estimation of the recharge rate is critical for a sustainable use of the resource. Extensive hydrogeological and geophysical studies have revealed differences in groundwater recharge by a factor of two and more between the top of the dunes and the dune valleys. The most convincing proof of these differences in recharge is based on isotope analysis (age dating) but boreholes are scarce and a direct proof of recharge is desired. For this purpose active infiltration experiments are performed and geophysically monitored. Former applications of this method in sand and loess soil gave evidence for the applicability of the geophysical observation when combined with tensiometers installed in situ at depth. These results showed firstly that in sandy soil the water reaches the groundwater table quicker than anticipated due to the water repellent characteristic of the dry sand, inhibiting the lateral spreading of the water. The studies also revealed that in loess preferential flow is initiated by ponding and that sprinkling caused very slow movement of water within the unsaturated zone and the water remained near the surface. On the island of Langeoog field experiments underlined the importance of water repellency on the dune surface, indicating that the rain water runs off superficially into the dune valleys where higher recharge is found. The active infiltration zone of the experiment covers an area of some 7m² and includes steeper parts of the dune. The infiltration will vary depending on rainfall intensity and duration, original water content and vegetation cover. What results can we reliably expect from the active experiment and what additional measurements are required to back up the findings? Results are ambiguous with regard to the quantitative assessment but the processes can be visualized by geophysical monitoring in situ.

  17. Statin adverse effects: patients' experiences and laboratory monitoring of muscle and liver injuries.

    Science.gov (United States)

    Chaipichit, Nataporn; Krska, Janet; Pratipanawatr, Thongchai; Jarernsiripornkul, Narumol

    2015-04-01

    Although statins have great benefit on the prevention of cardiovascular diseases with limited adverse effects (AEs), little is known about patients' contribution of AE reports in clinical practice. To explore patients' experiences of statin AEs and related laboratory monitoring in clinical practice. Outpatient clinics of two University hospitals in northeast Thailand. Generic symptom checklist questionnaires for self-reporting AEs were distributed to patients prescribed simvastatin, atorvastatin, or rosuvastatin at outpatient clinics. Clinical information was obtained from medical records. Reported symptoms were assessed for causality considering previously known statin AEs, concomitant diseases and drugs. Potential statin AEs reported by patients and monitoring of laboratory parameters related to musculoskeletal and liver disorders. Of the total 718 valid responses, 76.0 % of patients reported at least one symptom, most of which (69.0 %) were probable/possible statin AEs. Musculoskeletal and liver-related symptoms were reported by 283 (39.4 %) and 134 patients (18.7 %), respectively. Probable/possible AEs were categorized in 56.7 % of their musculoskeletal and gastrointestinal symptoms. Majority of patients had at least one laboratory test on initiation of (64.8 %) and during statin treatment (61.8 %). Patients taking atorvastatin or rosuvastatin, and patients with history of chronic renal diseases were more likely to have creatine kinase (CK) monitored on initiation of and during statin treatment. Additionally, taking drugs which could potentially increase muscle injury (OR 1.929, P statin treatment. Reporters of musculoskeletal symptoms also had significantly higher mean CK level than those not reporting any musculoskeletal symptoms (207.35 ± 155.40 vs. 143.95 ± 83.07 U/L, respectively; P = 0.037). Patient reporting of liver AEs was not related to alanine aminotransferase (ALT) level and monitoring, however, prior history of liver disorders was significantly

  18. The source of monoenergetic electrons for the monitoring of spectrometer in the KATRIN neutrino experiment

    CERN Document Server

    Slezák, Martin

    The international project KATRIN (KArlsruhe TRItium Neutrino experiment) is a next-generation tritium $\\beta$-decay experiment. It is designed to measure the electron anti-neutrino mass by means of a unique electron spectrometer with sensitivity of 0.2 eV/c$^2$. This is an improvement of one order of magnitude over the last results. Important part of the measurement will rest in continuous precise monitoring of high voltage of the KATRIN main spectrometer. The monitoring will be done by means of conversion electrons emitted from a solid source based on $^{83}$Rb decay. Properties of several of these sources are studied in this thesis by means of the semiconductor $\\gamma$-ray spectroscopy. Firstly, measurement of precise energy of the 9.4 keV nuclear transition observed in $^{83}$Rb decay, from which the energy of conversion electrons is derived, is reported. Secondly, measurement of activity distribution of the solid sources by means of the Timepix detector is described. Finally, a report on measurement of r...

  19. The data quality monitoring challenge at CMS experience from first collisions and future plans

    CERN Document Server

    De Guio, Federico

    2015-01-01

    The Data Quality Monitoring (DQM) Software is a central tool in the CMS experiment. Its robustness and flexibility is critical for monitoring detector performance and providing fast and comprehensive feedback centrally for the experiment in real-time (Online DQM), after a full event processing with fine-grained analysis (Offline DQM), and as a validation tool to validate both the CMS software (CMSSW), calibration and alignment scenarios and extensive simulations. The entire DQM framework has undergone fundamental changes, and the first performance results of this newly updated system will be presented in the context of the first proton-proton collisions for CERNs Large Hadron Collider at a center of mass energy of 13 TeV. These results will encapsulate the performance of the CMS detector in the context of the upgraded DQM system that makes available more sophisticated methods for evaluating data quality, as well as a dedicated review of the technical challenges and improvements specific to the DQM framework i...

  20. Perceptions and experiences of participants in a study of in-vehicle monitoring of teenage drivers.

    Science.gov (United States)

    McCartt, Anne T; Farmer, Charles M; Jenness, James W

    2010-08-01

    To assess the perceptions and experiences of participants in a study of a device that monitored teenagers' driving. A device that continuously monitors and reports risky driving maneuvers was installed in vehicles of 84 newly licensed teenagers. Study groups varied by whether parents had access to a Web site that summarized their teenagers' driving and by whether in-vehicle alerts provided feedback to drivers. Recruitment of subjects and problems with the device were documented. Teenagers and parents were interviewed after removal of the device. Although the study was conducted in a large urban area, recruitment progressed slowly. Parents who declined to participate usually said their teenagers opposed it, or they were concerned about intruding on the privacy of their children or jeopardizing trust with them. Both parents and teenagers thought in-vehicle alerts helped teenagers drive more safely, although two thirds of teenagers tried to drown out the alerts with loud music. Parents found the Web site useful but reported fewer Web site visits over time. Most parents would prefer receiving information through summary report cards rather than through a Web site. Both parents and teenagers thought the overall system was effective in improving teenagers' driving. Most parents said the Web site and/or device helped them talk to their teenagers about their driving. Parents thought the most effective system would be an in-vehicle alert with immediate parental notification; teenagers preferred a system allowing them to correct behavior before parental notification. The difficulties in recruiting families for a study of in-vehicle monitoring and feedback technology suggest that gaining broad acceptance may be challenging. Although many teenagers were annoyed by the technology, most said they drove more safely because of it. Sending report cards to parents and allowing teenagers to correct behavior before parents are notified may increase the usefulness and acceptability of

  1. Development of wide-band GRB detectors and the GRB monitor for the CALET Experiment

    Science.gov (United States)

    Yoshida, Atsumasa; Yamaoka, Kazutaka; Nakagawa, Yujin; Nakahira, Satoshi; Sugita, Satoshi; Tomida, Hiroshi; Torii, Shoji

    Many previous observations revealed radiations from GRBs to be widely emitted in electromagnetic energy band form less than a keV to over a GeV range, and peak-energies of νFν spectra to be distributed rather more widely than expected before. Those includes soft events explored by Ginga, BeppoSAX and HETE-2, and delayed GeV emissions and additional hard continuum detected by EGRET. It is very important to have a GRB monitor in space to be sensitive to photons in continuously wide energy range. We are developing wide-band GRB detectors utilizing several kinds of scintillator and X-ray CCD for future space missions. One of these detectors is that proposed as a GRB Monitor for the CALorimetric Electron Telescope (CALET) mission that was selected for Phase A/B studies as a next experiment for JEM-EF of ISS. The GRB Monitor (GBM) is a part of this experiment to extend scientific products achieved by CALET which can detect gamma-rays in a range from about 20MeV to TeV by itself and is potentially sensitive to hard radiations from GRBs. GBM is designed as multiple scintillation counters made of BGO and LaBr3 (Ce) to detect GRBs in a few keV to about 20MeV range alone, and to cover the energy band continuously up-to TeV region together with the CALET's main instruments, Imaging Calorimeter (IMC) and Total Absorption Calorimeter (TASC); one can expect sensitive range of nine orders of magnitude for GRBs inside the IMC's FOV of about 1.8 str. We present current status of our study including preliminary experimental results for LaBr3 (Ce) using a proton accelerator, and the design and expected ability of CALET-GBM.

  2. Atmospheric monitoring of a perfluorocarbon tracer at the 2009 ZERT Center experiment

    Science.gov (United States)

    Pekney, Natalie; Wells, Arthur; Rodney Diehl, J.; McNeil, Matthew; Lesko, Natalie; Armstrong, James; Ference, Robert

    2012-02-01

    Field experiments at Montana State University are conducted for the U.S. Department of Energy as part of the Zero Emissions Research and Technology Center (ZERT) to test and verify monitoring techniques for carbon capture and storage (CCS). A controlled release of CO 2 with an added perfluorocarbon tracer was conducted in July 2009 in a multi-laboratory study of atmospheric transport and detection technologies. Tracer plume dispersion was measured with various meteorological conditions using a tethered balloon system with Multi-Tube Remote Samplers (MTRS) at elevations of 10 m, 20 m, and 40 m above ground level (AGL), as well as a ground-based portable tower with monitors containing sorbent material to collect the tracer at 1 m, 2 m, 3 m, and 4 m AGL. Researchers designed a horizontal grid of sampling locations centered at the tracer plume source, with the tower positioned at 10 m and 30 m in both upwind and downwind directions, and the MTRS spaced at 50 m and 90 m downwind and 90 m upwind. Tracer was consistently detected at elevated concentrations at downwind sampling locations. With very few exceptions, higher tracer concentrations correlated with lower elevations. Researchers observed no statistical difference between sampling at 50 m and 90 m downwind at the same elevation. The US EPA AERMOD model applied using site-specific information predicted transport and dispersion of the tracer. Model results are compared to experimental data from the 2009 ZERT experiment. Successful characterization of the tracer plume simulated by the ZERT experiment is considered a step toward demonstrating the feasibility of remote sampling with unmanned aerial systems (UAS's) at future sequestration sites.

  3. New experience in atmospheric monitoring in Moscow city on the base of WSN technology

    Science.gov (United States)

    Asavin, Alex; Litvinov, Artur; Baskakov, Sergey; Chesalova, Elena

    2016-04-01

    on the each calibration graphics with different H2 concentration in standard gas mixtures. The graphics represent the power functions. The accuracy of the approximating functions is 3-18 %. At low concentrations (H2 internal antenna or connection to an external antenna, a microcontroller, an electronic circuit for interfacing with the sensors and an energy source, usually a battery or an embedded form of energy harvesting. All nodes are equal and serve as routers, so there is no need to plan nodes placement in advance Mesh Network protocol. Every node maintains a local routing table with information about one or several neighbors. The signal transmission between nodes and router used radio channel 2.6 GHz. Communication between router and IT server used two methods: cable RS486 and GPRS modem. GPRS connection is unstable and influence on operating stability. There are some problems in using of directional antenna because of the high level of city's radio noises and radio interferences. Nevertheless, a number of experiments with use of different technical solutions allowed us to perform continuous monitoring during 2 months. As a result about 3 million data records were obtained during experimental works. This information provided an opportunity to develop the structure of database management systems to store data and the technology of online data collection from remote sensors. Using the abilities of program software a periodical (12h) automatic export/import was realized. Access to file on remote computers is opened using FTP protocol. Database forms derived tables for each sensors. We use triggers to modify data, for example, to modify signal from gas sensors to gas concentration, in depend of unique sensor name. Additional table gives geographical coordinates of each node. We use GIS project for visualization and data analysis. Experiences revealed the inverse relationship between H2 concentration and temperature and pressure. Also we revealed periodicity of gas

  4. AIM - Agile Instrumented Monitoring for Improving User Experience of Participation in HealthIT Development.

    Science.gov (United States)

    Pitkänen, Janne; Nieminen, Marko

    2017-01-01

    Participation of healthcare professionals in information technology development has emerged as an important challenge. As end-users, the professionals are willing to participate in the development activities, but their experiences on the current methods of participation remain mostly negative. There is lack of applicable methods for meeting the needs of agile development approach and scaling up to the largest implementation projects, while maintaining the interest of the professional users to participate in development activities and keeping up their ability to continue working in a productive manner. In this paper, we describe the Agile Instrumented Monitoring as a methodology, based on the methods of instrumented usability evaluation, for improving user experience in HealthIT development. The contribution of the proposed methodology is analyzed in relation to activities of whole iteration cycle and chosen usability evaluation methods, while the user experience of participation is addressed regarding healthcare professionals. Prospective weak and strong market tests for AIM are discussed in the conclusions for future work.

  5. Monitoring groundwater storage change in Mekong Delta using Gravity Recovery and Climate Experiment (GRACE) data

    Science.gov (United States)

    Aierken, A.; Lee, H.; Hossain, F.; Bui, D. D.; Nguyen, L. D.

    2016-12-01

    The Mekong Delta, home to almost 20 million inhabitants, is considered one of the most important region for Vietnam as it is the agricultural and industrial production base of the nation. However, in recent decades, the region is seriously threatened by variety of environmental hazards, such as floods, saline water intrusion, arsenic contamination, and land subsidence, which raise its vulnerability to sea level rise due to global climate change. All these hazards are related to groundwater depletion, which is the result of dramatically increased over-exploitation. Therefore, monitoring groundwater is critical to sustainable development and most importantly, to people's life in the region. In most countries, groundwater is monitored using well observations. However, because of its spatial and temporal gaps and cost, it is typically difficult to obtain large scale, continuous observations. Since 2002, the Gravity Recovery and Climate Experiment (GRACE) satellite gravimetry mission has delivered freely available Earth's gravity variation data, which can be used to obtain terrestrial water storage (TWS) changes. In this study, the TWS anomalies over the Mekong Delta, which are the integrated sum of anomalies of soil moisture storage (SMS), surface water storage (SWS), canopy water storage (CWS), groundwater storage (GWS), have been obtained using GRACE CSR RL05 data. The leakage error occurred due to GRACE signal processing has been corrected using several different approaches. The groundwater storage anomalies were then derived from TWS anomalies by removing SMS, and CWS anomalies simulated by the four land surface models (NOAH, CLM, VIC and MOSAIC) in the Global Land Data Assimilation System (GLDAS), as well as SWS anomalies estimated using ENVISAT satellite altimetry and MODIS imagery. Then, the optimal GRACE signal restoration method for the Mekong Delta is determined with available in-situ well data. The estimated GWS anomalies revealed continuously decreasing

  6. The Lyman Alpha Imaging-Monitor Experiment (LAIME) for TESIS/CORONAS-PHOTON

    Science.gov (United States)

    Damé, L.; Koutchmy, S.; Kuzin, S.; Lamy, P.; Malherbe, J.-M.; Noëns, J.-C.

    LAIME the Lyman Alpha Imaging-Monitor Experiment is a remarkably simple no mechanisms and compact 100x100x400 mm full Sun imager to be flown with TESIS on the CORONAS-PHOTON mission launch expected before mid-2008 As such it will be the only true chromospheric imager to be flown in the next years supporting TESIS EUV-XUV imaging SDO and the Belgian LYRA Lyman Alpha flux monitor on the ESA PROBA-2 microsatellite launch expected in September 2007 We will give a short description of this unique O60 mm aperture imaging telescope dedicated to the investigating of the magnetic sources of solar variability in the UV and chromospheric and coronal disruptive events rapid waves Moreton waves disparitions brusques of prominences filaments eruptions and CMEs onset The resolution pixel is 2 7 arcsec the field of view 1 4 solar radius and the acquisition cadence could be as high as 1 image minute The back thinned E2V CCD in the focal plane is using frame transfer to avoid shutter and mechanisms Further more the double Lyman Alpha filtering allows a 40 AA FWHM bandwidth and excellent rejection yet providing a vacuum seal design of the telescope MgF2 entrance window Structural stability of the telescope focal length 1 m is preserved by a 4-INVAR bars design with Aluminium compensation in a large pm 10 o around 20 o

  7. First test results of a high-speed beam conditions monitor for the ATLAS experiment

    CERN Document Server

    Pernegger, Heinz

    2004-01-01

    The paper presents the design and first test results of the high- speed beam conditions monitor (BCM) for the ATLAS experiment at the large hadron collider (LHC). The goal of the BCM is to monitor instantaneous rates of collision and background and detect signs of beam instabilities. The detector is based on polycrystalline chemical-vapor-deposition (pCVD) diamond as active sensor material. We have chosen this detector material for its proven radiation hardness and fast signal properties. For the readout of the diamonds we developed front-end readout electronics based on high-bandwidth RF amplifiers. The signal response of the amplifier has been optimized for the ionization current signal of pCVD diamond in order to achieve a signal risetime of

  8. Data Quality Monitoring System for New GEM Muon Detectors for the CMS Experiment Upgrade

    Science.gov (United States)

    King, Robert; CMS Muon group Team

    2017-01-01

    The Gas Electron Multiplier (GEM) detectors are novel detectors designed to improve the muon trigger and tracking performance in CMS experiment for the high luminosity upgrade of the LHC. Partial installation of GEM detectors is planned during the 2016-2017 technical stop. Before the GEM system is installed underground, its data acquisition (DAQ) electronics must be thoroughly tested. The DAQ system includes several commercial and custom-built electronic boards running custom firmware. The front-end electronics are radiation-hard and communicate via optical fibers. The data quality monitoring (DQM) software framework has been designed to provide online verification of the integrity of the data produced by the detector electronics, and to promptly identify potential hardware or firmware malfunctions in the system. Local hits reconstruction and clustering algorithms allow quality control of the data produced by each GEM chamber. Once the new detectors are installed, the DQM will monitor the stability and performance of the system during normal data-taking operations. We discuss the design of the DQM system, the software being developed to read out and process the detector data, and the methods used to identify and report hardware and firmware malfunctions of the system.

  9. Implant experience with an implantable hemodynamic monitor for the management of symptomatic heart failure.

    Science.gov (United States)

    Steinhaus, David; Reynolds, Dwight W; Gadler, Fredrik; Kay, G Neal; Hess, Mike F; Bennett, Tom

    2005-08-01

    Management of congestive heart failure is a serious public health problem. The use of implantable hemodynamic monitors (IHMs) may assist in this management by providing continuous ambulatory filling pressure status for optimal volume management. The Chronicle system includes an implanted monitor, a pressure sensor lead with passive fixation, an external pressure reference (EPR), and data retrieval and viewing components. The tip of the lead is placed near the right ventricular outflow tract to minimize risk of sensor tissue encapsulation. Implant technique and lead placement is similar to that of a permanent pacemaker. After the system had been successfully implanted in 148 patients, the type and frequency of implant-related adverse events were similar to a single-chamber pacemaker implant. R-wave amplitude was 15.2 +/- 6.7 mV and the pressure waveform signal was acceptable in all but two patients in whom presence of artifacts required lead repositioning. Implant procedure time was not influenced by experience, remaining constant throughout the study. Based on this evaluation, permanent placement of an IHM in symptomatic heart failure patients is technically feasible. Further investigation is warranted to evaluate the use of the continuous hemodynamic data in management of heart failure patients.

  10. The evolution of satellite-monitored radio tags for large whales: One laboratory's experience

    Science.gov (United States)

    Mate, Bruce; Mesecar, Roderick; Lagerquist, Barbara

    2007-02-01

    Despite several centuries of whaling and directed research, there are only a few whale stocks whose year-round whereabouts are reasonably well known. For the vast majority of depleted populations, the link between seasonal feeding and breeding concentrations remains unknown. This lack of information on range, seasonal distribution, stock structure, and migration routes makes it difficult to design and implement effective conservation measures to promote recovery. The use of such information would have been valuable to develop stock-specific quotas for whaling, but now it may be even more important for recovery of depleted stocks and identifying anthropogenic threats throughout a depleted stock's range. Building upon the preliminary findings of Discovery tags and more recent photo identification studies, satellite-monitored radio tags are now providing range and seasonal distribution information for many stocks of depleted large whales. These parameters are important to better estimate population abundance, characterize habitats, identify threats to recovery, and design effective protection measures when needed. This paper traces one laboratory's experience with the development of satellite-monitored radio tag technology for large whales, including attachment mechanisms and delivery systems, in the hope that others will profit from our successes and our mistakes. Selected examples are used to demonstrate how such tags contribute to new insights about whales' habitats, migrations, behaviour, and management.

  11. Glance traceability – Web system for equipment traceability and radiation monitoring for the ATLAS experiment

    CERN Document Server

    Ramos de Azevedo Evora, L H; Pommes, K; Galvão, K K; Maidantchik, C

    2010-01-01

    During the operation, maintenance, and dismantling periods of the ATLAS Experiment, the traceability of all detector equipment must be guaranteed for logistic and safety matters. The running of the Large Hadron Collider will expose the ATLAS detector to radiation. Therefore, CERN must follow specific regulations from both the French and Swiss authorities for equipment removal, transport, repair, and disposal. GLANCE Traceability, implemented in C++ and Java/Java3D, has been developed to fulfill the requirements. The system registers and associates each equipment part to either a functional position in the detector or a zone outside the underground area through a 3D graphical user interface. Radiation control of the equipment is performed using a radiation monitor connected to the system: the local background gets stored and the threshold is automatically calculated. The system classifies the equipment as non radioactive if its radiation dose does not exceed that limit value. History for both location traceabi...

  12. Developing Control and Monitoring Software for the Data Acquisition System of the COMPASS Experiment at CERN

    Directory of Open Access Journals (Sweden)

    Martin Bodlák

    2013-01-01

    Full Text Available This paper focuses on the analysis, design and development of software for the new data acquisition system of the COMPASS experiment at CERN. In this system, the data flow is controlled by custom hardware; the software will therefore be used only for run control and for monitoring. The requirements on the software have been analyzed, and the functionality of the system has been defined. The system consists of several distributed nodes; communication between the nodes is based on a custom protocol and a DIM library. A minimal version of the system has already been implemented. Preliminary results of performance and stability tests have shown that the system fulfills the defined requirements, and is stable. In the next phase of development, the system will be tested on the real hardware. It is expected that the system will be ready for deployment in 2014.

  13. New developments in French transient monitoring system: SYSFAC From the experiments to the industrial process

    Energy Technology Data Exchange (ETDEWEB)

    Balley, J. [Electricite de France, 69 - Villeurbanne (France). SEPTEN; Bertagnolio, D. [Electricite de France, 69 - Villeurbanne (France). SEPTEN; Faidy, C. [Electricite de France, 69 - Villeurbanne (France). SEPTEN; Kappler, F. [Electricite de France, 69 - Villeurbanne (France). SEPTEN; Kergoat, M. [Electricite de France, 69 - Villeurbanne (France). SEPTEN; L`Huby, Y. [Electricite de France, 69 - Villeurbanne (France). SEPTEN; Genette, P. [Electricite de France, 69 - Villeurbanne (France). SEPTEN; Savoldelli, D. [Electricite de France, Production-Transport DMAINT, 13 Esplanade Charles de Gaulle, 92060 La Defense (France); Fournier, I. [Electricite de France, Direction Etudes et Recherches REME, 25 allee privee, Carrefour Pleyel, 93206 St. Denis (France)

    1995-01-01

    After more than 15 years of experience with regulatory transient data collection, Electricite de France decided to design a new concept of fatigue monitoring system called SYSFAC. This new system is the result of seven years of successful experimentation with fatigue meters. This system will be connected to the on-site data acquisition system without any complementary instrumentation. The SYSFAC system has a modular structure: the mechanical transient module, the functional transient module, the fatigue meters module and the global damage computing module all have a high level of flexibility to be applied to various types of circuits. After the preliminary studies had been achieved, it was decided to undertake the industrial phase of the SYSFAC project. Specific codes on PC computers have been used to validate the basic concepts and the operator interface. Real-size coding will last one year and the first SYSFAC system will be delivered to the pilot power plant by the end of 1995. ((orig.)).

  14. A new luminometer and beam conditions monitor for the CMS experiment

    Energy Technology Data Exchange (ETDEWEB)

    Karacheban, Olena; Hempel, Maria [Brandenburg University of Technology, Cottbus (Germany); DESY, Zeuthen (Germany); Dabrowski, Anne; Ryjov, Vladimir; Stickland, David; Zagozdzinska, Agnieszka [CERN, Geneva (Switzerland); Henschel, Hans; Lange, Wolfgang [DESY, Zeuthen (Germany); Leonard, Jessica; Walsh, Roberval [DESY, Hamburg (Germany); Levy, Itamar [Tel Aviv University, Tel Aviv (Israel); Lohmann, Wolfgang [Brandenburg University of Technology, Cottbus (Germany); RWTH Aachen University, Aachen (Germany); Przyborowski, Dominik [AGH-UST University, Cracow (Poland); Schuwalow, Sergej [DESY, Zeuthen (Germany); DESY, Hamburg (Germany)

    2016-07-01

    The luminosity is a key quantity of any collider, which allows for the determination of the absolute cross sections from the observed rate in a detector. The Fast Beam Conditions Monitor (BCM1F) was upgraded in the last LHC long technical stop (LS1) to 24 diamond sensors read out by a dedicated fast ASIC in 130 nm CMOS technology. The backend comprises a deadtime-less histogramming unit, with a 6.25 ns bin width, in VME standard. A microTCA system with better time resolution is in development. BCM1F is used for luminosity and machine induced background measurements at the CMS experiment. The performance of the detector in the first running period, as well as results on the calibration (Van-der-Meer scan) and the measurements of the luminosity are presented.

  15. Development of a monitoring tool to validate trigger level analysis in the ATLAS experiment

    CERN Document Server

    Hahn, Artur

    2014-01-01

    This report summarizes my thirteen week summer student project at CERN from June 30th until September 26th of 2014. My task was to contribute to a monitoring tool for the ATLAS experiment, comparing jets reconstructed by the trigger to fully offline reconstructed and saved events by creating a set of insightful histograms to be used during run 2 of the Large Hadron Collider, planned to start in early 2015. The motivation behind this project is to validate the use of data taken solely from the high level trigger for analysis purposes. Once the code generating the plots was completed, it was tested on data collected during run 1 up to the year 2012 and Monte Carlo simulated events with center-of-mass energies ps = 8TeV and ps = 14TeV.

  16. The Seismic Aftershock Monitoring System (SAMS) for OSI - Experiences from IFE14

    Science.gov (United States)

    Gestermann, Nicolai; Sick, Benjamin; Häge, Martin; Blake, Thomas; Labak, Peter; Joswig, Manfred

    2016-04-01

    An on-site inspection (OSI) is the third of four elements of the verification regime of the Comprehensive Nuclear-Test-Ban Treaty (CTBT). The sole purpose of an OSI is to confirm whether a nuclear weapon test explosion or any other nuclear explosion has been carried out in violation of the treaty and to gather any facts which might assist in identifying any possible violator. It thus constitutes the final verification measure under the CTBT if all other available measures are not able to confirm the nature of a suspicious event. The Provisional Technical Secretariat (PTS) carried out the Integrated Field Exercise 2014 (IFE14) in the Dead Sea Area of Jordan from 3 November to 9. December 2014. It was a fictitious OSI whose aim was to test the inspection capabilities in an integrated manner. The technologies allowed during an OSI are listed in the Treaty. The aim of the Seismic Aftershock Monitoring System (SAMS) is to detect and localize aftershocks of low magnitudes of the triggering event or collapses of underground cavities. The locations of these events are expected in the vicinity of a possible previous explosion and help to narrow down the search area within an inspection area (IA) of an OSI. The success of SAMS depends on the main elements, hardware, software, deployment strategy, the search logic and not least the effective use of personnel. All elements of SAMS were tested and improved during the Built-Up Exercises (BUE) which took place in Austria and Hungary. IFE14 provided more realistic climatic and hazardous terrain conditions with limited resources. Significant variations in topography of the IA of IFE14 in the mountainous Dead Sea Area of Jordan led to considerable challenges which were not expected from experiences encountered during BUE. The SAMS uses mini arrays with an aperture of about 100 meters and with a total of 4 elements. The station network deployed during IFE14 and results of the data analysis will be presented. Possible aftershocks of

  17. The SfM-monitored rill experiment, a tool to detect decisive processes?

    Science.gov (United States)

    Remke, Alexander-André; Wirtz, Stefan; Brings, Christine; Gronz, Oliver; Seeger, Manuel; Ries, Johannes B.

    2016-04-01

    The initiation of rill erosion marks the transition from sheet to linear erosion. With this transition, the relevant processes change and therefore, the observation method needs to be changed too: from observing rainfall induced drop impacts to hydraulic observations. For us, the investigation of the decisive processes in eroding rills resulted in a constantly revised and updated rill erosion experiment, that has been used for several years. Within this experiment the sediment transport behavior of rills is simulated and examined. To make the experiment repeatable and replicable, several key-variables have to be kept constant, i.e. water quantity (1000 L), test duration (approx. 4 min.) and the length of the tested rill section (20 m). For each tested rill, the topographic background is determined i.e. catchment area, aspect, slope, position and height of existing knick-points and three cross-sections. After the initial assessment, the rill is flushed with water (250 L min -1) twice in order to determine the modifications of the rill caused by the flowing water. Within these approx. 4 minutes of "controlled destruction" the velocity of the turbulently flowing water at the beginning of the erosional event and after one and two minutes is determined and the corresponding water depth is recorded using three gauges at selected measuring points. At the end of the tested rill segment, the discharge is constantly monitored. Unfortunately, the results of this rill experiment do not directly show the modifications caused by the artificial waterflow. A way out of this knowledge gap is offered by combining this experimental measurement method with a technique already used in different scientific disciplines in more large-scale applications. Structure-from-Motion technology offers the opportunity to get a different, more detailed view inside the erosion rills. A static multi-camera-array and a dynamically moved digital video-frame camera are now used to obtain three

  18. Large-scale infiltration experiments into unsaturated stratified loess sediments: Monitoring and modeling

    Science.gov (United States)

    Gvirtzman, Haim; Shalev, Eyal; Dahan, Ofer; Hatzor, Yossef H.

    2008-01-01

    SummaryTwo large-scale field experiments were conducted to track water flow through unsaturated stratified loess deposits. In the experiments, a trench was flooded with water, and water infiltration was allowed until full saturation of the sediment column, to a depth of 20 m, was achieved. The water penetrated through a sequence of alternating silty-sand and sandy-clay loess deposits. The changes in water content over time were monitored at 28 points beneath the trench, using time domain reflectometry (TDR) probes placed in four boreholes. Detailed records were obtained from a 21-day-period of wetting, followed by a 3-month-period of drying, and finally followed by a second 14-day-period of re-wetting. These processes were simulated using a two-dimensional numerical code that solves the flow equation. The model was calibrated using PEST. The simulations demonstrate that the propagation of the wetting front is hampered due to alternating silty-sand and sandy-clay loess layers. Moreover, wetting front propagation is further hampered by the extremely low values of the initial, unsaturated, hydraulic conductivity; thereby increasing the water content within the onion-shaped wetted zone up to full saturation. Numerical simulations indicate that above-hydrostatic pressure is developed within intermediate saturated layers, enhancing wetting front propagation.

  19. Preliminary experience with dexmedetomidine for monitored anesthesia care during ENT surgical procedures.

    Science.gov (United States)

    Busick, Tamra; Kussman, Mary; Scheidt, Troy; Tobias, Joseph D

    2008-01-01

    Dexmedetomidine is an alpha2-adrenergic agonist that produces anxiolysis, amnesia, sedation, potentiation of opioid analgesia, and sympatholysis. It is currently approved by the U.S. Food & Drug Administration for the sedation of adults in the intensive care setting for up to 24 hours during mechanical ventilation. Given its beneficial sedative and anxiolytic properties and limited adverse effect profile, it has been used in several other clinical scenarios. The authors present their experience using dexmedetomidine for monitored anesthesia care (MAC) during "awake" ENT procedures such as thyroplasty, a procedure requiring a patient to verbalize when requested but to otherwise remain immobile to allow for completion of the procedure, and in a patient with post-polio syndrome with poor pulmonary reserve requiring esophagoscopy with dilation and botulinum toxin injection for cricopharyngeal dysfunction. Our preliminary experience suggests that dexmedetomidine provides effective sedation as the primary agent for MAC during such procedures in adult patients. The end-organ effects of dexmedetomidine and previous reports of its use during MAC are reviewed.

  20. 5 CFR 839.1203 - Can OPM compensate me for my losses if I did not take any legal action against my employer, but...

    Science.gov (United States)

    2010-01-01

    ... retirement coverage error? 839.1203 Section 839.1203 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT...) OPM cannot pay you for: (1) Claimed losses related to forgone contributions and earnings under the TSP, other than lost earnings on make-up contributions to the TSP as provided in subpart J of this part;...

  1. 5 CFR 591.216 - How does OPM combine survey data for the DC area and for COLA areas with multiple survey areas?

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false How does OPM combine survey data for the DC area and for COLA areas with multiple survey areas? 591.216 Section 591.216 Administrative... combine survey data for the DC area and for COLA areas with multiple survey areas? (a) Washington,...

  2. Hydrologic Process Regularization for Improved Geoelectrical Monitoring of a Lab-Scale Saline Tracer Experiment

    Science.gov (United States)

    Oware, E. K.; Moysey, S. M.

    2016-12-01

    Regularization stabilizes the geophysical imaging problem resulting from sparse and noisy measurements that render solutions unstable and non-unique. Conventional regularization constraints are, however, independent of the physics of the underlying process and often produce smoothed-out tomograms with mass underestimation. Cascaded time-lapse (CTL) is a widely used reconstruction technique for monitoring wherein a tomogram obtained from the background dataset is employed as starting model for the inversion of subsequent time-lapse datasets. In contrast, a proper orthogonal decomposition (POD)-constrained inversion framework enforces physics-based regularization based upon prior understanding of the expected evolution of state variables. The physics-based constraints are represented in the form of POD basis vectors. The basis vectors are constructed from numerically generated training images (TIs) that mimic the desired process. The target can be reconstructed from a small number of selected basis vectors, hence, there is a reduction in the number of inversion parameters compared to the full dimensional space. The inversion involves finding the optimal combination of the selected basis vectors conditioned on the geophysical measurements. We apply the algorithm to 2-D lab-scale saline transport experiments with electrical resistivity (ER) monitoring. We consider two transport scenarios with one and two mass injection points evolving into unimodal and bimodal plume morphologies, respectively. The unimodal plume is consistent with the assumptions underlying the generation of the TIs, whereas bimodality in plume morphology was not conceptualized. We compare difference tomograms retrieved from POD with those obtained from CTL. Qualitative comparisons of the difference tomograms with images of their corresponding dye plumes suggest that POD recovered more compact plumes in contrast to those of CTL. While mass recovery generally deteriorated with increasing number of time

  3. Nondestructive tests for railway monitoring. European Experience in COST Action TU1208

    Science.gov (United States)

    Fontul, Simona; Solla, Mercedes; Loizos, Andreas

    2016-04-01

    The railway monitoring is an important issue for a proper maintenance planning. With the increase in loads and travel speed, it is important to be able to diagnose the track defects and to plan the proper maintenance without interfering with the users. Traditionally, the maintenance actions are planned based on the geometric level parameters assessed without contact with the line, at traffic speed, by dedicated inspection vehicles. Nevertheless, the geometric condition of the line does not provide information on the defects causes. In order to complements the information on the causes, geophysics measurements can be performed in a nondestructive way. Among these later methods, Ground Penetrating Radar (GPR) is a quick and effective technique to evaluate infrastructure condition in a continuous manner, replacing or reducing the use of traditional drilling method. GPR application to railways infrastructures, during construction and monitoring phase, is relatively recent. It is based on the measuring of layers thicknesses and detection of structural changes. It also enables the assessment of materials properties that constitute the infrastructure and the evaluation of the different types of defects such as ballast pockets, fouled ballast, poor drainage, subgrade settlement and transitions problems. These deteriorations are generally the causes of vertical deviations in track geometry. Moreover, the development of new GPR systems with higher antenna frequencies, better data acquisition systems, more user friendly software and new algorithms for calculation of materials properties can lead to a regular use of GPR. A resume of the European experience in COST Action TU1208 of the application of GPR for railway monitoring and the measurement interpretation is presented in this paper. Also complementary nondestructive tests and other geophysical methods are referred, together with case studies of their application. The main troubleshooting and the needs for data analysis

  4. Volunteer stream monitoring: Do the data quality and monitoring experience support increased community involvement in freshwater decision making?

    Directory of Open Access Journals (Sweden)

    Richard G. Storey

    2016-12-01

    Full Text Available Recent freshwater policy reforms in New Zealand promote increased community involvement in freshwater decision making and management. Involving community members in scientific monitoring increases both their knowledge and their ability to discuss this knowledge with professionals, potentially increasing their influence in decision-making processes. However, these interactions rarely occur because, in particular, of perceptions that volunteer-collected data are unreliable. We assessed the agreement between volunteer (community group and local government (regional council data at nine stream sites across New Zealand. Over 18 months, community groups and regional council staff monitored, in parallel, a common set of water quality variables, physical habitat, periphyton and benthic macroinvertebrates that are routinely used by regional councils for statutory state of environment reporting. Community groups achieved close agreement (correlations ≥ 0.89, bias < 1% with regional councils for temperature, electrical conductivity, visual water clarity, and Escherichia coli. For dissolved oxygen, nitrate, and pH, correlations were weaker (0.2, 0.53, and 0.4, respectively. Volunteer assessments of physical habitat were as consistent over time as those of councils. For visual assessments of thick periphyton growths (% streambed cover, volunteers achieved a correlation of 0.93 and bias of 0.1% relative to councils. And for a macroinvertebrate biotic index that indicates water and habitat quality, correlation was 0.88, bias was < 5%, and the average difference was 12% of the index score. Volunteers showed increased awareness of local freshwaters, understanding of stream ecosystems, and attentiveness to local and national freshwater issues. Most volunteers had shared their knowledge and interest with others in their community. Most groups had developed relationships with their regional council, and some volunteers became more interested in engaging in

  5. A laser profilometry technique for monitoring fluvial dike breaching in laboratory experiments

    Science.gov (United States)

    Dewals, Benjamin; Rifai, Ismail; Erpicum, Sébastien; Archambeau, Pierre; Violeau, Damien; Pirotton, Michel; El kadi Abderrezzak, Kamal

    2017-04-01

    A challenging aspect for experimental modelling of fluvial dike breaching is the continuous monitoring of the transient breach geometry. In dam breaching cases induced by flow overtopping over the whole breach crest (plane erosion), a side view through a glass wall is sufficient to monitor the breach formation. This approach can be extended for 3D dam breach tests (spatial erosion) if the glass wall is located along the breach centreline. In contrast, using a side view does not apply for monitoring fluvial dike breaching, because the breach is not symmetric in this case. We present a non-intrusive, high resolution technique to record the breach development in experimental models of fluvial dikes by means of a laser profilometry (Rifai et al. 2016). Most methods used for monitoring dam and dike breaching involve the projection of a pattern (fringes, grid) on the dam or dike body and the analysis of its deformation on images recorded during the breaching (e.g., Pickert et al. 2011, Frank and Hager 2014). A major limitation of these methods stems from reflection on the water surface, particularly in the vicinity of the breach where the free surface is irregular and rippled. This issue was addressed by Spinewine et al. (2004), who used a single laser sheet so that reflections on the water surface were strongly limited and did not hamper the accurate processing of each image. We have developed a similar laser profilometry technique tailored for laboratory experiments on fluvial dike breaching. The setup is simple and relatively low cost. It consists of a digital video camera (resolution of 1920 × 1080 pixels at 60 frames per second) and a swiping red diode 30 mW laser that enables the projection of a laser sheet over the dike body. The 2D image coordinates of each deformed laser profile incident on the dike are transformed into 3D object coordinates using the Direct Linear Transformation (DLT) algorithm. All 3D object coordinates computed over a swiping cycle of the

  6. Monitoring soil erosion in terraced catchments in Mediterranean regions: a field experiment in Cyprus

    Science.gov (United States)

    Camera, Corrado; Djuma, Hakan; Zoumides, Christos; Eliades, Marinos; Bruggeman, Adriana; Abate, Dante; Faka, Marina; Hermon, Sorin

    2016-04-01

    monitored by sediment traps is performed. The scan produces a point cloud with a resolution close to 2 mm. The comparison of the 3D models derived in different times allows detecting changes in the terrain topography, which can be transformed in to erosion rates knowing the soil bulk density. The preliminary results of the monitoring experiment, which started at the beginning of November 2015, show erosion rates an order of magnitude higher in the collapsed sections of the terrace wall in comparison to the preserved ones. A more comprehensive analysis relating erosion rates to precipitation intensity, assessing yearly erosion rates in degraded terraced environments and comparing different monitoring techniques are expected at the end of the rainy season (April).

  7. LUCID A Cherenkov Tube Based Detector for Monitoring the ATLAS Experiment Luminosity

    CERN Document Server

    Sbrizzi, A

    2007-01-01

    The LUCID (LUminosity Cherenkov Integrating Detector) apparatus is composed by two symmetric arms deployed at about 17 m from the ATLAS interaction point. The purpose of this detector, which will be installed in january 2008, is to monitor the luminosity delivered by the LHC machine to the ATLAS experiment. An absolute luminosity calibration is needed and it will be provided by a Roman Pot type detector with the two arms placed at about 240 m from the interaction point. Each arm of the LUCID detector is based on an aluminum vessel containing 20 Cherenkov tubes, 15 mm diameter and 1500 mm length, filled with C4F10 radiator gas at 1.5 bar. The Cherenkov light generated by charged particles above the threshold is collected by photomultiplier tubes (PMT) directly placed at the tubes end. The challenging aspect of this detector is its readout in an environment characterized by the high dose of radiation (about 0.7 Mrad/year at 10^33cm^2 s^-1) it must withstand. In order to fulfill these radiation hardness requirem...

  8. The RAPTOR Experiment A System for Monitoring the Optical Sky in Real Time

    CERN Document Server

    Vestrand, W T; Brumby, S; Casperson, D E; Fenimore, E E; Galassi, M; McGowan, K; Perkins, S; Priedhorsky, W; Starr, D; White, R; Wozniak, P R; Wren, J

    2002-01-01

    The Rapid Telescopes for Optical Response (RAPTOR) experiment is a spatially distributed system of autonomous robotic telescopes that is designed to monitor the sky for optical transients. The core of the system is composed of two telescope arrays, separated by 38 kilometers, that stereoscopically view the same 1500 square-degree field with a wide-field imaging array and a central 4 square-degree field with a more sensitive narrow-field "fovea" imager. Coupled to each telescope array is a real-time data analysis pipeline that is designed to identify interesting transients on timescales of seconds and, when a celestial transient is identified, to command the rapidly slewing robotic mounts to point the narrow-field ``fovea'' imagers at the transient. The two narrow-field telescopes then image the transient with higher spatial resolution and at a faster cadence to gather light curve information. Each "fovea" camera also images the transient through a different filter to provide color information. This stereoscop...

  9. P1-7: Modern Display Technology in Vision Science: Assessment of OLED and LCD Monitors for Visual Experiments

    Directory of Open Access Journals (Sweden)

    Tobias Elze

    2012-10-01

    Full Text Available For many decades, cathode ray tube (CRT monitors have been the dominant display technology in vision science. However, in recent years, most manufacturers stopped their CRT production lines, which enforces the application of alternative display technology in the field of vision science. Here, we analyze liquid crystal displays (LCDs and organic light-emitting diode (OLED monitors for their applicability in vision science experiments. Based on extensive measurements of their photometric output, we compare these technologies and contrast them with classical CRT monitors. Vision scientists aim to accurately present both static and dynamic stimuli on their display devices. As for the presentation of static stimuli, we demonstrate an increased accuracy for LCD and OLED devices compared to CRT monitors, because the former exhibit a higher degree of independence of neighboring pixels. As for dynamic presentations, both CRTs and OLEDs outperform LCD devices in terms of accuracy, because dynamic presentations on LCDs require a reorientation of the liquid crystal molecules, so that successive frames in time depend on each other. Together with widely unknown and uncontrolled technical artifacts, these properties of LCDs may impair visual experiments that require high temporal precision. Therefore, OLED monitors are more suitable for vision science experiments with respect to both their static and their temporal characteristics. However, for certain applications in visual neuroscience, the low duty cycle of some OLED devices may introduce frequencies to the photometric output which fall within the window of visibility of neurons in the visual cortex and therefore interfere with single unit recordings.

  10. A Reimplementation of the CORBA-based Event Monitoring System For the ATLAS LHC Experiment at CERN

    CERN Document Server

    Scholtes, Ingo; Kolos, Serguei

    2005-01-01

    The Atlas Event Monitoring system is a subsystem of the Atlas Online Software, providing a framework for sampling events from different stages of the data flow chain of the ATLAS detector and distributing it to so-called Monitoring Tasks run by physicists. After a short introduction to the ATLAS experiment, the data aquisition project and its different software components and the general purpose of Event Monitoring, this thesis discusses the previous implementation as well as different aspects of the reimplementation that has been done in the context of this thesis. After having done a theoretical analysis of the communication complexity of both implementations and the presentation of practical performance test results captured during the Large Scale Test period a conclusion will be made, showing why the reimplementation is more suitable for actual usage in the final experiment than the previous implementation.

  11. Validation of Global Ozone Monitoring Experiment zone profiles and evaluation of stratospheric transport in a global chemistry transport model

    NARCIS (Netherlands)

    Laat, A.T.J.de; Landgraf, J.; Aben, I.; Hasekamp, O.; Bregman, B.

    2007-01-01

    This paper presents a validation of Global Ozone Monitoring Experiment (GOME) ozone (O3) profiles which are used to evaluate stratospheric transport in the chemistry transport model (CTM) Tracer Model version 5 (TM5) using a linearized stratospheric O3 chemistry scheme. A comparison of GOME O3 profi

  12. Planning and Computerised Monitoring of an Experiment of Thermal Analysis of the Alloys in the Al-Cu-Si System

    Directory of Open Access Journals (Sweden)

    Florentina Cziple

    2007-10-01

    Full Text Available The paper presents an installation conceived for the automatic registration of the temperature in the thermal analysis, at the industrial and laboratory level, with application to the system of non-ferrous alloys Al-Cu-Si. The experiment performed on the above installation is compared to processes monitored through simulation with specialised software.

  13. LHCb: Beam and Background Monitoring and the Development of an Online Condition Analysis Tool for the LHCb Experiment at CERN

    CERN Multimedia

    Alessio, F

    2010-01-01

    The LHCb experiment has been taking data since more than half a year at the LHC, recording events from collisions at the highest energy ever achieved. For its physics purposes in the sector of CP violation, the experiment will record data with the best precision achievable. An online and offline beam and background monitoring became therefore essential to understand the performance of the LHC accelerator at CERN, to monitor and study the behavior of the background around the LHCb experiment and to optimize the experimental conditions. During my second year as a Doctoral Student at CERN, I have been working on the timing and readout control as well as on the online Beam, Background, and Luminosity Monitoring of the LHCb experiment in the frame of the LHCb Online group. The group is responsible for the complete data acquisition of the LHCb experiment, from the Front-End Electronics (FEE) to the storage of the data for offline analysis, including the Timing and Fast Control (TFC) system. The latter controls and...

  14. Proof of concept experiments of the multi-isotope process monitor: An online, nondestructive, near real-time monitor for spent nuclear fuel reprocessing facilities

    Energy Technology Data Exchange (ETDEWEB)

    Orton, Christopher R., E-mail: christopher.orton@pnnl.gov [Pacific Northwest National Laboratory, 902 Battelle Boulevard, P.O. Box 999, Richland, WA 99354 (United States); Fraga, Carlos G., E-mail: carlos.fraga@pnnl.gov [Pacific Northwest National Laboratory, 902 Battelle Boulevard, P.O. Box 999, Richland, WA 99354 (United States); Christensen, Richard N., E-mail: christensen.3@osu.edu [The Ohio State University, 201W. 19th Avenue, Columbus, Ohio 43210 (United States); Schwantes, Jon M., E-mail: jon.schwantes@pnnl.gov [Pacific Northwest National Laboratory, 902 Battelle Boulevard, P.O. Box 999, Richland, WA 99354 (United States)

    2012-04-21

    Operators, national regulatory agencies and the IAEA will require the development of advanced technologies to efficiently control and safeguard nuclear material at increasingly large-scale nuclear recycling facilities. Ideally, the envisioned technologies would be capable of non-destructive, near real-time (NRT), autonomous process monitoring. This paper describes results from proof-of-principle experiments designed to test the multi-isotope process (MIP) monitor, a novel approach to monitoring and safeguarding reprocessing facilities. The MIP Monitor combines the detection of intrinsic gamma ray signatures emitted from process solutions with multivariate analysis to detect off-normal conditions in process streams nondestructively and in NRT. Commercial spent nuclear fuel of various irradiation histories was dissolved and separated using a PUREX-based batch solvent extraction. Extractions were performed at various nitric acid concentrations to mimic both normal and off-normal industrial plant operating conditions. Principal component analysis (PCA) was applied to the simulated gamma spectra to investigate pattern variations as a function of acid concentration, burnup and cooling time. Partial least squares (PLS) regression was applied to attempt to quantify both the acid concentration and burnup of the dissolved spent fuel during the initial separation stage of recycle. The MIP Monitor demonstrated sensitivity to induced variations of acid concentration, including the distinction of {+-}1.3 M variation from normal process conditions by way of PCA. Acid concentration was predicted using measurements from the organic extract and PLS resulting in predictions with <0.7 M relative error. Quantification of burnup levels from dissolved fuel spectra using PLS was demonstrated to be within 2.5% of previously measured values.

  15. Proof of concept experiments of the multi-isotope process monitor: An online, nondestructive, near real-time monitor for spent nuclear fuel reprocessing facilities

    Science.gov (United States)

    Orton, Christopher R.; Fraga, Carlos G.; Christensen, Richard N.; Schwantes, Jon M.

    2012-04-01

    Operators, national regulatory agencies and the IAEA will require the development of advanced technologies to efficiently control and safeguard nuclear material at increasingly large-scale nuclear recycling facilities. Ideally, the envisioned technologies would be capable of non-destructive, near real-time (NRT), autonomous process monitoring. This paper describes results from proof-of-principle experiments designed to test the multi-isotope process (MIP) monitor, a novel approach to monitoring and safeguarding reprocessing facilities. The MIP Monitor combines the detection of intrinsic gamma ray signatures emitted from process solutions with multivariate analysis to detect off-normal conditions in process streams nondestructively and in NRT. Commercial spent nuclear fuel of various irradiation histories was dissolved and separated using a PUREX-based batch solvent extraction. Extractions were performed at various nitric acid concentrations to mimic both normal and off-normal industrial plant operating conditions. Principal component analysis (PCA) was applied to the simulated gamma spectra to investigate pattern variations as a function of acid concentration, burnup and cooling time. Partial least squares (PLS) regression was applied to attempt to quantify both the acid concentration and burnup of the dissolved spent fuel during the initial separation stage of recycle. The MIP Monitor demonstrated sensitivity to induced variations of acid concentration, including the distinction of ±1.3 M variation from normal process conditions by way of PCA. Acid concentration was predicted using measurements from the organic extract and PLS resulting in predictions with <0.7 M relative error. Quantification of burnup levels from dissolved fuel spectra using PLS was demonstrated to be within 2.5% of previously measured values.

  16. Optical absorption properties of electron bubbles and experiments on monitoring individual electron bubbles in liquid helium

    Science.gov (United States)

    Guo, Wei

    When a free electron is injected into liquid helium, it forms a microscopic bubble essentially free of helium atoms, which is referred to as an electron bubble. It represents a fine example of a quantum-mechanical particle confined in a potential well. In this dissertation, we describe our studies on bubble properties, especially the optical absorption properties of ground state electron bubbles and experiments on imaging individual electron bubbles in liquid helium. We studied the effect of zero-point and thermal fluctuations on the shape of ground state electron bubbles in liquid helium. The results are used to determine the line shape for the 1S to 1P optical transition. The calculated line shape is in very good agreement with the experimental measurements of Grimes and Adams. For 1S to 2P transition, the obtained transition line width agrees well with the measured data of Zipfel over a range of pressure up to 15 bars. Fluctuations in the bubble shape also make other "unallowed" transitions possible. The transition cross-sections from the 1S state to the 1D and 2D states are calculated with magnitude approximately two orders smaller than that of the 1S to 1P and 2P transitions. In our electron bubble imaging experiments, a planar ultrasonic transducer was used to generate strong sound wave pulse in liquid helium. The sound pulse passed through the liquid so as to produce a transient negative pressure over a large volume (˜ 1 cm3). An electron bubble that was passed by the sound pulse exploded for a fraction of a microsecond and grew to have a radius of around 10 microns. While the bubble had this large size it was illuminated with a flash lamp and its position was recorded. In this way, we can determine its position. Through the application of a series of sound pulses, we can then take images along the track of individual electrons. The motion of individual electron bubbles has been successfully monitored. Interesting bubble tracks that may relate to electrons

  17. Older Adults’ Experiences Using a Commercially Available Monitor to Self-Track Their Physical Activity

    Science.gov (United States)

    2016-01-01

    Background Physical activity contributes to older adults’ autonomy, mobility, and quality of life as they age, yet fewer than 1 in 5 engage in activities as recommended. Many older adults track their exercise using pencil and paper, or their memory. Commercially available physical activity monitors (PAM) have the potential to facilitate these tracking practices and, in turn, physical activity. An assessment of older adults’ long-term experiences with PAM is needed to understand this potential. Objective To assess short and long-term experiences of adults >70 years old using a PAM (Fitbit One) in terms of acceptance, ease-of-use, and usefulness: domains in the technology acceptance model. Methods This prospective study included 95 community-dwelling older adults, all of whom received a PAM as part of randomized controlled trial piloting a fall-reducing physical activity promotion intervention. Ten-item surveys were administered 10 weeks and 8 months after the study started. Survey ratings are described and analyzed over time, and compared by sex, education, and age. Results Participants were mostly women (71/95, 75%), 70 to 96 years old, and had some college education (68/95, 72%). Most participants (86/95, 91%) agreed or strongly agreed that the PAM was easy to use, useful, and acceptable both 10 weeks and 8 months after enrolling in the study. Ratings dropped between these time points in all survey domains: ease-of-use (median difference 0.66 points, P=.001); usefulness (median difference 0.16 points, P=.193); and acceptance (median difference 0.17 points, P=.032). Differences in ratings by sex or educational attainment were not statistically significant at either time point. Most participants 80+ years of age (28/37, 76%) agreed or strongly agreed with survey items at long-term follow-up, however their ratings were significantly lower than participants in younger age groups at both time points. Conclusions Study results indicate it is feasible for older

  18. Monitoring extracted beams of the nuclotron accelerator complex for "energy + transmutation" experiments

    Science.gov (United States)

    Baldin, A. A.; Berlev, A. I.; Vasil'ev, S. E.; Vishnevskiy, A. V.; Vladimirova, N. M.; Kudashkin, I. V.; Makan'kin, A. M.; Paraipan, M.; Tyutyunnikov, S. I.

    2016-03-01

    A monitoring system for measuring absolute intensity and the space—time structure of extracted beams of Nuclotron based on ionization and activation methods has been created and tested. The monitoring system provides a measurement of the absolute intensity of extracted beams with a precision of 10% and beam position with a precision of 0.5 mm.

  19. Front-End Control and Monitoring System for the Resistive Plate Chambers at the CMS Experiment

    CERN Document Server

    Thyssen, Filip

    2011-01-01

    An online control and monitoring system has recently been developed to automatically configure and continuously monitor FEB parameters. A fine-grained software model of hardware and detector components, organized in a dual hierarchical tree structure, facilitates command and data flow. A novel web-based user-interface allows control of an...

  20. The role of community carbon monitoring for REDD+: a review of experiences

    NARCIS (Netherlands)

    Larrazabal de la Via, Alejandra Patricia; McCall, M.K.; Mwampamba, T.H.; Skutsch, Margaret

    2012-01-01

    This paper reviews research which has investigated community skills for carbon (and other natural resource) monitoring. The assessment focuses on the reliability of the data, the cost of community monitoring (CM) versus expert surveys, and the broader benefits and challenges of involving communities

  1. Computer modeling and laboratory experiments of a specific borehole to surface electrical monitoring technique (BSEMT)

    NARCIS (Netherlands)

    Meekes, J.A.C.; Zhang, X.; Abdul Fattah, R.

    2011-01-01

    Geophysical monitoring of the dynamical behavior of subsurface reservoirs (oil, gas, CO2) remains an important issue in geophysical research. A new idea for reservoir monitoring based on electrical resistivity tomography was developed at TNO. The essential element of the so-called BSEMT (Borehole to

  2. Development of a beam condition monitor for use in experiments at the CERN Large Hadron Collider using synthetic diamond

    CERN Document Server

    Fernández-Hernando, L; Ilgner, C; MacPherson, A; Oh, A; Pernegger, H; Pritchard, T; Stone, R; Worm, S

    2004-01-01

    The CERN Large Hadron Collider (LHC) will collide two counter rotating proton beams, each with a store energy about 350MJ; enough to melt 550kg of copper. If there is failure in an element of the accelerator, the resulting beam losses could cause damage not only to the machine but also to the experiments. A Beam Condition Monitor (BCM) is foreseen to monitor last increments of particle flux near the interaction point and if necessary, to generate an abort signal to the LHC accelerator control, to dump the beams. Due to its radiation hardness and minimal services requirements, synthetic CVD diamond is being considered as BCM sensor option. (12 refs).

  3. Improving the gas gain monitoring system in multiwire proportional chambers for MUON detector of LHCb experiment.

    CERN Document Server

    Ruvinskaia, Ekaterina

    2016-01-01

    The gas gain monitoring system in multi-wire proportional chambers for MUON detector of LHCb has been constructed and commissioned. It includes an online- monitoring, tools for analysis the archived data and an alarm system on the quality of the gas mixture. Finally, it will be implemented in the main ECS of LHCb for MUON detector and as a part of safety system of LHCb as a permanent online monitor of the quality of the gas mixture in MWPCs. The main advantage of this setup is a monitoring of Gas Gain (GG) in MWPCs with radioactive sources independently from the presence of beam at LHC. It also provides an option for prompt reaction in case of a problem with the gas.

  4. Research on simulation and experiment of noninvasive intracranial pressure monitoring based on acoustoelasticity effects

    OpenAIRE

    Wu J.; He W; Chen W; Zhu L

    2013-01-01

    Jun Wu1, Wei He2, Wei-min Chen1, Lian Zhu21Key Laboratory of Optoelectronic Technology and Systems, 2State Key Laboratory of Power Transmission Equipment and System Security and New Technology, Chongqing University, Chongqing, People’s Republic of ChinaAbstract: The real-time monitoring of intracranial pressure (ICP) is very important for craniocerebrally critically ill patients, but it is very difficult to realize long-time monitoring for the traditional invasive method, which very...

  5. Credit Monitoring – a Core of Credit Risk Management: Theory and Experience

    Directory of Open Access Journals (Sweden)

    Daiva Jurevičienė

    2013-11-01

    Full Text Available Purpose of the article: Purpose of the article is to identify credit monitoring as a keystone of credit risk management in banks. CRM is widely discussed in scientific literature and in reports of institutions undertaking credit risk or supervisory bodies. However majority of such investigations are based on implementation of numerous quantitative or qualitative methods used for credit risk assessment before granting a loan or for credit portfolio risk management. There is a lack of information or investigations made on estimation of the need of credit monitoring in credit risk management process. Scientific aim: Scientific aim is to structure the early warning signs that reflect the condition of credits. Methodology/methods: The paper is based on analysis and resumption of various scientific and professional articles related to organization of credit process in banks. It combines results of assessments of credit monitoring importance in credit risk management process made by theoretical studies as well as investigation of experts. Findings: Finding of the article is presentation of credit monitoring tools that should be applied for corporate (and individual clients via modification of original credit agreement. Conclusions: (limits, implications etc Conclusion of the article is that credit monitoring is a keystone in credit risk management process. The purpose of credit monitoring is to detect in time possible worsening of the loan and to react (make changes in loan agreement. The simplest tool for credit monitoring is to identify early warning signs in time that could be assorted into four groups: EWS of business environment; EWS with regard to management, EWS regarding collateral, EWS in financial analysis. Limitation of investigation is impossibility of evaluation of importance of monitoring process in practice except investigation of experts (employees directly responsible for credit business.

  6. The Global Ozone Monitoring Experiment (GOME): Mission Concept and First Scientific Results.

    Science.gov (United States)

    Burrows, John P.; Weber, Mark; Buchwitz, Michael; Rozanov, Vladimir; Ladstätter-Weißenmayer, Annette; Richter, Andreas; Debeek, Rüdiger; Hoogen, Ricarda; Bramstedt, Klaus; Eichmann, Kai-Uwe; Eisinger, Michael; Perner, Dieter

    1999-01-01

    The Global Ozone Monitoring Experiment (GOME) is a new instrument aboard the European Space Agency's (ESA) Second European Remote Sensing Satellite (ERS-2), which was launched in April 1995. The main scientific objective of the GOME mission is to determine the global distribution of ozone and several other trace gases, which play an important role in the ozone chemistry of the earth's stratosphere and troposphere. GOME measures the sunlight scattered from the earth's atmosphere and/or reflected by the surface in nadir viewing mode in the spectral region 240-790 nm at a moderate spectral resolution of between 0.2 and 0.4 nm. Using the maximum 960-km across-track swath width, the spatial resolution of a GOME ground pixel is 40 × 320 km2 for the majority of the orbit and global coverage is achieved in three days after 43 orbits.Operational data products of GOME as generated by DLR-DFD, the German Data Processing and Archiving Facility (D-PAF) for GOME, comprise absolute radiometrically calibrated earthshine radiance and solar irradiance spectra (level 1 products) and global distributions of total column amounts of ozone and NO2 (level 2 products), which are derived using the DOAS approach (Differential Optical Absorption Spectroscopy). (Under certain conditions and some restrictions, the operational data products are publically available from the European Space Agency via the ERS Helpdesk.)In addition to the operational data products, GOME has delivered important information about other minor trace gases such as OClO, volcanic SO2, H2CO from biomass burning, and tropospheric BrO. Using an iterative optimal estimation retrieval scheme, ozone vertical profiles can be derived from the inversion of the UV/VIS spectra. This paper reports on the GOME instrument, its operation mode, and the retrieval techniques, the latter with particular emphasis on DOAS (total column retrieval) and advanced optimal estimation (ozone profile retrieval).Observation of ozone depletion in the

  7. Proof of Concept Experiments of the Multi-Isotope Process Monitor: An Online, Nondestructive, Near Real-Time Monitor for Spent Nuclear Fuel Reprocessing Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Orton, Christopher R.; Fraga, Carlos G.; Christensen, Richard; Schwantes, Jon M.

    2012-04-21

    Operators, national regulatory agencies and the IAEA will require the development of advanced technologies to efficiently control and safeguard nuclear material at increasingly large-scale nuclear recycling facilities. Ideally, the envisioned technologies would be capable of non-destructive, near-real-time (NRT), autonomous process monitoring. This paper describes results from proof-of-principle experiments designed to test the Multi-Isotope Process (MIP) Monitor, a novel approach to safeguarding reprocessing facilities. The MIP Monitor combines the detection of intrinsic gamma ray signatures emitted from process solutions with multivariate analysis to detect off-normal conditions in process streams nondestructively and in NRT. Commercial spent nuclear fuel of various irradiation histories was dissolved and separated using a PUREX-based batch solvent extraction. Extractions were performed at various nitric acid concentrations to mimic both normal and off-normal industrial plant operating conditions. Principal Component Analysis (PCA) was applied to the simulated gamma spectra to investigate pattern variations as a function of acid concentration, burnup and cooling time. Partial Least Squares (PLS) regression was applied to attempt to quantify both the acid concentration and burnup of the dissolved spent fuel during the initial separation stage of recycle. The MIP Monitor demonstrated sensitivity to induced variations of acid concentration, including the distinction of {+-} 1.3 M variation from normal process conditions by way of PCA. Acid concentration was predicted using measurements from the organic extract and PLS resulting in predictions with <0.7 M relative error. Quantification of burnup levels from dissolved fuel spectra using PLS was demonstrated to be within 2.5% of previously measured values.

  8. International experience feedback on fatigue monitoring systems for nuclear power plants; Le retour d`experience international des fatiguemetres des tranches nucleaires

    Energy Technology Data Exchange (ETDEWEB)

    Morilhat, P. [Electricite de France (EDF), Direction des Etudes et Recherches, 92 - Clamart (France)

    1997-12-31

    From the very beginning of electro-nuclear programmes the need has become internationally obvious to develop systems aiming at automation and improvement of monitoring of the transients stressing the main mechanical components of nuclear units, by checking the conservativeness of the design no longer from a comparison of causes (temperature and pressure variations) but by directly assessing the results (stresses and linked damage). Prototypes of such systems have appeared since the middle of the 1980`s mainly in France, the USA and Germany, and manufacturing them has since continued. Several years of development and on site testing of prototypes of fatigue measuring devices designed by the R and D Direction have enabled contacts with the developers of similar systems to be established and, in some cases, comparisons to be made. The experience accumulated in the use of such systems, both in France and abroad from now on makes a first experience feedback possible. The fatigue measuring device concept is based on a succession of elementary modules which enable the information received from the unit to be processed, first in the form of transient counting (transient meters), then in the form of mechanical diagnosis (fatigue monitoring systems). Among the systems in operation some provide actually only the transient meter part while others link transient meters and fatigue meters (EDF, EPRI and MITSUBISHI systems and some versions of the SIEMENS system). Moreover, numerous systems require, in addition to unit operation instrumentation, specific instrumentation located in monitored areas. The number of devices in operation has not stopped growing since the middle of the 80`s to reach 53 systems working in 1996. The biggest developers are EPRI and its consultant Structural Integrity Associates (FatiguePro system), SIEMENS (FAMOS system) and EDF whose gradual implementation of SYSFAC from `96 is going to make its share particularly increase. Technical experience feedback

  9. An observing system simulation experiment for climate monitoring with GNSS radio occultation data: Setup and test bed study

    OpenAIRE

    U. Foelsche; Kirchengast, G.; A. Steiner; Kornblueh, L.; Manzini, E.; L. Bengtsson

    2008-01-01

    The long-term stability, high accuracy, all-weather capability, high vertical resolution, and global coverage of Global Navigation Satellite System ( GNSS) radio occultation ( RO) suggests it as a promising tool for global monitoring of atmospheric temperature change. With the aim to investigate and quantify how well a GNSS RO observing system is able to detect climate trends, we are currently performing an ( climate) observing system simulation experiment over the 25-year period 2001 to 2025...

  10. The fiber-SiPMT beam monitor of the R484 experiment at the RIKEN-RAL muon facility

    Science.gov (United States)

    Carbone, R.; Bonesini, M.; Bertoni, R.; Mazza, R.; Rossella, M.; Tortora, L.; Vacchi, A.; Vallazza, E.; Zampa, G.

    2015-03-01

    The scintillating fibers SiPM based beam monitor detector, designed to deliver position, shape and timing of the low energy muon beam at the RIKEN-RAL muon facility for the R484 experiment, has been successfully tested on the electron beam at the Beam Test Facility (BTF) of the INFN LNF laboratories. We report here the lay out and the read out structure as well as the very promising results.

  11. Solid electron sources for the energy scale monitoring in the KATRIN experiment

    CERN Document Server

    Zbořil, Miroslav; Vénos, D

    The KArlsruhe TRItium Neutrino (KATRIN) experiment represents a next-generation tritium $\\beta$-decay experiment designed to perform a high precision direct measurement of the electron anti-neutrino mass m($\

  12. Large-scale laboratory testing of bedload-monitoring technologies: overview of the StreamLab06 Experiments

    Science.gov (United States)

    Marr, Jeffrey D.G.; Gray, John R.; Davis, Broderick E.; Ellis, Chris; Johnson, Sara; Gray, John R.; Laronne, Jonathan B.; Marr, Jeffrey D.G.

    2010-01-01

    A 3-month-long, large-scale flume experiment involving research and testing of selected conventional and surrogate bedload-monitoring technologies was conducted in the Main Channel at the St. Anthony Falls Laboratory under the auspices of the National Center for Earth-surface Dynamics. These experiments, dubbed StreamLab06, involved 25 researchers and volunteers from academia, government, and the private sector. The research channel was equipped with a sediment-recirculation system and a sediment-flux monitoring system that allowed continuous measurement of sediment flux in the flume and provided a data set by which samplers were evaluated. Selected bedload-measurement technologies were tested under a range of flow and sediment-transport conditions. The experiment was conducted in two phases. The bed material in phase I was well-sorted siliceous sand (0.6-1.8 mm median diameter). A gravel mixture (1-32 mm median diameter) composed the bed material in phase II. Four conventional bedload samplers – a standard Helley-Smith, Elwha, BLH-84, and Toutle River II (TR-2) sampler – were manually deployed as part of both experiment phases. Bedload traps were deployed in study Phase II. Two surrogate bedload samplers – stationarymounted down-looking 600 kHz and 1200 kHz acoustic Doppler current profilers – were deployed in experiment phase II. This paper presents an overview of the experiment including the specific data-collection technologies used and the ambient hydraulic, sediment-transport and environmental conditions measured as part of the experiment. All data collected as part of the StreamLab06 experiments are, or will be available to the research community.

  13. Orthogonal experiment design of EMI of security monitoring system in coal mines

    Institute of Scientific and Technical Information of China (English)

    Xiang Liu; Chaoqun Jiao; Aifen Yao

    2015-01-01

    Security monitoring system of coal mines is indispensable to ensure the safe and efficient production of colliery. Due to the special and narrow underground field of the coal mine, the electromagnetic interference can cause a series of misstatements and false positives on the monitoring system, which will severely hamper the safe production of coal industry. In this paper, first, the frequency characteristics of the interference source on the power line are extracted when equipment runs normally. Then the finite difference time domain method is introduced to analyze the effects of the electromagnetic interference parameters on the security monitoring signal line. And the interference voltage of the two terminal sides on the single line is taken as evaluating indexes. Finally, the electromagnetic interference parameters are optimized by orthogonal experimental design based on the MATLAB simulation on the normal operation of equipment.

  14. The new Beam Halo Monitor for the CMS experiment at the LHC

    CERN Document Server

    Tosi, Nicolo

    In the context of increasing beam energy and luminosity of the LHC accelerator at CERN, it will be important to accurately measure the Machine Induced Background. A new monitoring system will be installed in the CMS cavern for measuring the beam background at high radius. This detector, called the Beam Halo Monitor, will provide an online, bunch-by-bunch measurement of background induced by beam halo interactions, separately for each beam. The detector is composed of synthetic quartz Cherenkov radiators, coupled to fast UV sensitive photomultiplier tubes. The directional and fast response of the system allows the discrimination of the background particles from the dominant flux in the cavern induced by pp collision debris, produced within the 25 ns bunch spacing. The readout electronics of this detector will make use of many components developed for the upgrade of the CMS Hadron Calorimeter electronics, with a dedicated firmware and readout adapted to the beam monitoring requirements. The PMT signal will be d...

  15. Fast Beam Conditions Monitor BCM1F for the CMS Experiment

    CERN Document Server

    Bell, A; Hall-Wilton, R; Lange, W; Lohmann, W; Macpherson, A; Ohlerich, M; Rodriguez, N; Ryjov, V; Schmidt, R S; Stone, R L

    2010-01-01

    The CMS Beam Conditions and Radiation Monitoring System, BRM, will support beam tuning, protect the CMS detector from adverse beam conditions, and measure the accumulated dose close to or inside all sub-detectors. It is composed of different sub-systems measuring either the particle flux near the beam pipe with time resolution between nano- and microseconds or the integrated dose over longer time intervals. This paper presents the Fast Beam Conditions Monitor, BCM1F, which is designed for fast flux monitoring measuring both beam halo and collision products. BCM1F is located inside the CMS pixel detector volume close to the beam-pipe. It uses sCVD diamond sensors and radiation hard front-end electronics, along with an analog optical readout of the signals. The commissioning of the system and its successful operation during the first be ams of the LHC are described.

  16. Fast beam conditions monitor BCM1F for the CMS experiment

    Energy Technology Data Exchange (ETDEWEB)

    Bell, A. [CERN, Geneva (Switzerland); Geneva Univ. (Switzerland); Castro, E. [DESY Zeuthen (Germany); Hall-Wilton, R. [CERN, Geneva (Switzerland); Wisconsin Univ., Madison, WI (US)] (and others)

    2009-10-15

    The CMS Beam Conditions and Radiation Monitoring System, BRM, will support beam tuning, protect the CMS detector from adverse beam conditions, and measure the accumulated dose close to or inside all sub-detectors. It is composed of different sub-systems measuring either the particle flux near the beam pipe with time resolution between nano- and microseconds or the integrated dose over longer time intervals. This paper presents the Fast Beam Conditions Monitor, BCM1F, which is designed for fast flux monitoring measuring both beam halo and collision products. BCM1F is located inside the CMS pixel detector volume close to the beam-pipe. It uses sCVD diamond sensors and radiation hard front-end electronics, along with an analog optical readout of the signals. The commissioning of the system and its successful operation during the first beams of the LHC are described. (orig.)

  17. Levels of consciousness during regional anesthesia and monitored anesthesia care: patient expectations and experiences.

    Science.gov (United States)

    Esaki, Roy K; Mashour, George A

    2009-05-01

    Complaints of "intraoperative awareness" after regional anesthesia and monitored anesthesia care have been reported. We hypothesized that this may be due to either unmet expectations regarding levels of consciousness or states of consciousness resembling general anesthesia. A structured interview assessing expected and experienced levels of consciousness was given to 117 patients who underwent regional anesthesia or monitored anesthesia care. Complete unconsciousness was the state most often expected and subjectively experienced. Furthermore, only 58% of patients had expectations set by the anesthesia provider. These data indicate that, from the patient's perspective, the boundary between general and nongeneral anesthesia is obscured.

  18. Subsurface monitoring of reservoir pressure, temperature, relative humidity, and water content at the CAES Field Experiment, Pittsfield, Illinois: system design

    Energy Technology Data Exchange (ETDEWEB)

    Hostetler, D.D.; Childs, S.W.; Phillips, S.J.

    1983-03-01

    This subsurface-instrumentation design has been developed for the first Compressed Air Energy Storage (CAES) field experiment to be performed in porous media. Energy storage will be accomplished by alternating the injection and withdrawal of compressed air in a confined sandstone aquifer near Pittsfield, Illinois. The overall experiment objective is to characterize the reservoir's geochemical and thermohydraulic response to imposed CAES conditions. Specific experiment objectives require monitoring: air-bubble development; thermal development; cyclic pressure response; reservoir dehydration; and water coning. Supporting these objectives, four parameters will be continuously monitored at depth in the reservoir. They are: temperature; pressure; pore-air relative humidity; and pore-water content. Reservoir temperatures and pressures will range to maximum values approaching 200/sup 0/C and 300 psi, respectively. Both pore-air relative humidity and pore-water content will range from approx. 0 to 100%. This report discusses: instrumentation design; sensor and sensor system calibration; field installation and testing; and instrument-system operation. No comprehensive off-the-shelf instrument package exists to adequately monitor CAES reservoir parameters at depth. The best available sensors were selected and adapted for use under expected ranges of reservoir conditions. The instrumentation design criteria required: suitable sensor accuracy; continuous monitoring capability; redundancy; maximum sensor integrity; contingency planning; and minimum cost-information ratio. Three wells will be instrumented: the injection/withdrawal (I/W) well and the two instrument wells. Sensors will be deployed by wireline suspension in both open and backfilled (with sand) wellbores. The sensors deployed in the I/W well will be retrievable; the instrument-well sensors will not.

  19. In-flight spectral performance monitoring of the Airborne Prism Experiment

    NARCIS (Netherlands)

    Odorico, D' P.; Alberti, E.; Schaepman, M.E.

    2010-01-01

    Spectral performance of an airborne dispersive pushbroom imaging spectrometer cannot be assumed to be stable over a whole flight season given the environmental stresses present during flight. Spectral performance monitoring during flight is commonly accomplished by looking at selected absorption fea

  20. IMPLICATIONS OF INTER-HABITAT VARIATION FOR MONITORING GREAT RIVER ECOSYSTEMS: EMAP-UMR EXPERIENCE

    Science.gov (United States)

    Great River ecosystems (GREs) are complex mosaics of habitats that vary at multiple scales. GRE monitoring designs can capture some but not all of this variation. Each discrete habitat, however defined, must either be sampled as a separate strata or "resource population", combine...

  1. Body sensor networks for Mobile Health Monitoring: Experience in Europe and Australia

    NARCIS (Netherlands)

    Jones, Valerie M.; Gay, V.C.J.; Leijdekkers, Peter

    2010-01-01

    Remote ambulatory monitoring is widely seen as playing a key part in addressing the impending crisis in health care provision. We describe two mobile health solutions, one developed in the Netherlands and one in Australia. In both cases patients’ biosignals are measured by means of body worn sensors

  2. Development and application of a system for monitoring drug abuse: the Malaysian experience.

    Science.gov (United States)

    Navaratnam, V; Foong, K

    1989-01-01

    Monitoring systems are useful epidemiological instruments for assessing the problem of drug abuse. The rapid growth of the drug dependence problem in Malaysia led to increased awareness of the need for a system for continuous monitoring of the situation. Preliminary work on the design of an appropriate monitoring system was initiated in 1976. A fully integrated national reporting system was established in 1978, linking all public services and agencies coming into contact with drug-dependent persons, including law enforcement agencies, drug abuse treatment and rehabilitation centres, and social and welfare institutions. The information system included a mechanism for systematic gathering, processing, analysing and presenting essential data on the prevention, control and management of drug abuse problems. It also included reporting on drug-related events, such as hospitalizations and arrests, as well as data on known drug-dependent persons and new cases of dependence. The system has been used for routine monitoring of the extent, trends, patterns and other characteristics of drug abuse problems in Malaysia, providing basic information for policy-making and programme planning. On the basis of data generated by the system, it was estimated that the prevalence rate of drug-dependent persons per 100,000 population increased from 84.3 in 1976 to 754.6 in 1986. It was estimated that there were 119,001 drug-dependent persons in Malaysia in 1986.

  3. Body sensor networks for Mobile Health Monitoring: Experience in Europe and Australia

    NARCIS (Netherlands)

    Jones, Val; Gay, Valerie; Leijdekkers, Peter

    2009-01-01

    Remote ambulatory monitoring is widely seen as playing a key part in addressing the impending crisis in health care provision. We describe two mobile health solutions, one developed in the Netherlands and one in Australia. In both cases a patient’s biosignals are measured by means of a body sensor n

  4. Experiences of Mass Pig Carcass Disposal Related to Groundwater Quality Monitoring in Taiwan

    Directory of Open Access Journals (Sweden)

    Zeng-Yei Hseu

    2016-12-01

    Full Text Available The pig industry is the most crucial animal industry in Taiwan; 10.7 million pigs were reared for consumption in 1996. A foot and mouth disease (FMD epidemic broke out on 19 March 1997, and 3,850,536 pigs were culled before July in the same year. The major disposal method of pig carcasses from the FMD outbreak was burial, followed by burning and incineration. To investigate groundwater quality, environmental monitoring of burial sites was performed from October 1997 to June 1999; groundwater monitoring of 90–777 wells in 20 prefectures was performed wo to six times in 1998. Taiwanese governmental agencies analyzed 3723 groundwater samples using a budget of US $1.5 million. The total bacterial count, fecal coliform, Salmonella spp., nitrite-N, nitrate-N, ammonium-N, sulfate, non-purgeable organic carbon, total oil, and total dissolved solid were recognized as indicators of groundwater contamination resulting from pig carcass burial. Groundwater at the burial sites was considered to be contaminated on the basis of the aforementioned indicators, particularly groundwater at burial sites without an impermeable cloth and those located at a relatively short distance from the monitoring well. The burial sites selected during outbreaks in Taiwan should have a low surrounding population, be away from water preservation areas, and undergo regular monitoring of groundwater quality.

  5. First experiences with the Fitmore® hip stem: Early results of the 16-month monitoring

    Directory of Open Access Journals (Sweden)

    Mladenović Marko

    2017-01-01

    Full Text Available Background/Aim. Fitmore® hip stem belongs to the group of short stem prostheses with the metaphysar stabilization, with its shape and form that protects the bone mass in the greater trochanter region and the distal part of the femur. The aim of this paper was to present the early postoperative results in patients with implanted Fitmore® hip stem and point out some of the advantages. Methods. A series of 10 patients with implanted Fitmore® hip stem, was included in this study. The average age of the patients was 54.5 (48–65 years. There were 5 women and 5 men. The total monitoring time was 16 months. To rate the condition of the hip joint we used The Western Ontario and Mc Master Universities Arthritis Index (WOMAC score. We also monitored the degree of hip pain, hip flexion, heterotopic ossification and indentation in the stem of the prosthesis. Results. After 12 months of monitoring 9 (90% of the patients had no pain in the thigh region, and only 1 (10% experienced mild pain. The hip flexion rose from the average 89° to postoperative 114°. WOMAC score rose as well, from 49 to 94 average points. Indentation in the stem was registered 3 months after the operation in 2 (20% of the patients – in one of the patients the indentation was 3 mm and in the other patient 5 mm. After the 16-month monitoring, the results were excellent. The monitoring period was short though it should be continued and the results should be presented after 5 and then after 10 years. Conclusion. Early results of the implantation Fitmore stem showed good bone ingrowth with excellent functional result.

  6. Geophysical monitoring of near surface CO2 injection at Svelvik - Learnings from the CO2FieldLab experiments.

    Science.gov (United States)

    Querendez, Etor; Romdhane, Anouar; Jordan, Michael; Eliasson, Peder; Grimstad, Alv-Arne

    2014-05-01

    A CO2 migration field laboratory for testing monitoring methods and tools has been established in the glaciofluvial-glaciomarine Holocene deposits of the Svelvik ridge, near Oslo (Norway). At the site, feasibility, sensitivity, acquisition geometry and usefulness of various surface and subsurface monitoring tools are investigated during controlled CO2 injection experiments. In a first stage, a shallow CO2 injection experiment was conducted in September 2011. Approximately 1700 kg of CO2 was injected at 18 m depth below surface in an unconsolidated sand formation. The objectives of this experiment were to (i) detect and, where possible, quantify migrated CO2 concentrations at the surface and very shallow subsurface, (ii) evaluate the sensitivity of the monitoring tools and (iii) study the impact of the vadose zone on observed measurements. Results showed that all deployed monitoring tools (for surface and near-surface gas monitoring, subsurface water monitoring and subsurface geophysical monitoring) where able to detect the presence of CO2 even though the CO2 plume did not migrate vertically as expected in what was thought to be an homogeneous unconsolidated sand structure. The upper part of the site revealed to be more heterogeneous than expected, mainly due to the highly variable lamination and channelling of the morainic sediments and to the presence of pebble and cobble beds sporadically showing throughout the deposits. Building on the learnings from the 18m depth injection experiment, a second experiment is being planned for a deeper injection, at a depth of 65m. Re-processing of the appraisal 2D multi-channel seismic with state-of-the-art processing techniques, like Linear Radon coherent and random noise attenuation and Full Waveform Inversion followed by pre-stack depth migration, corroborate the presence of heterogeneities at the near surface. Based on the re-interpreted seismic sections, a more realistic 3D geomodel, where the complex topography of the site

  7. Monitoring of learning at the category level when learning a natural concept: will task experience improve its resolution?

    Science.gov (United States)

    Tauber, Sarah K; Dunlosky, John

    2015-02-01

    Researchers have recently begun to investigate people's ability to monitor their learning of natural categories. For concept learning tasks, a learner seeks to accurately monitor learning at the category level - i.e., to accurately judge whether exemplars will be correctly classified into the appropriate category on an upcoming test. Our interest was in whether monitoring resolution at the category level would improve as participants gain task experience across multiple study-test blocks, as well as within each block. In four experiments, exemplar birds (e.g., American Goldfinch, Cassin's Finch) paired with each family name (e.g., Finch) were studied, and participants made a judgment of learning (JOL) for each exemplar. Of most interest, before and after studying the exemplars, participants made category learning judgments (CLJs), which involved predicting the likelihood of correctly classifying novel birds into each family. Tests included exemplars that had been studied or exemplars that had not been studied (novel). This procedure was repeated for either one or two additional blocks. The relative accuracy of CLJs did not improve across blocks even when explicit feedback was provided, whereas item-by-item JOL accuracy improved across blocks. Category level resolution did improve from pre-study to post-study on an initial block, but it did not consistently increase within later blocks. The stable accuracy of CLJs across blocks poses a theoretical and empirical challenge for identifying techniques to improve people's ability to judge their learning of natural categories.

  8. Realisation Experience And Monitoring Perspectives In The Educational Sphere At Saratov State Medical University

    Directory of Open Access Journals (Sweden)

    E.S. Koznova

    2009-12-01

    Full Text Available A great experience of various research instruments in the context of new complex of techniques on collecting and feedback interpretation between various subjects of educational process has been received. Realization experience has been generalized, analyzed and presented in the article

  9. An experience on integrating monitoring and simulation tools in the design of energy-saving buildings

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, S. Flores; Lesino, G. [INENCO, Universidad Nacional de Salta, CONICET, Buenos Aires 177 (4400) Salta (Argentina); Filippin, C.; Beascochea, A. [Universidad Nacional de La Pampa, CONICET, Spinetto 785 (6300) Santa Rosa, La Pampa (Argentina)

    2008-07-01

    In this paper we describe the design and thermal behaviour of a bioclimatic Auditorium at the National University of La Pampa, used for teaching activities in Santa Rosa, La Pampa (Argentina). The building was monitored in winter and simulated with SIMEDIF for Windows, a code developed at the Non Conventional Energy Research Institute (INENCO, Argentina). Then, a new project of a similar building was proposed for General Pico city, and the obtained physical model was used to simulate the building under the summer temperatures of the new city. The building was redesigned and passive solar strategies were applied to reduce heating and cooling loads. The final layout and the monitored thermal behaviour of the new building in winter and summer are described. Without additional cost, the new building savings were 50% in heating requirements respect to the conventional layout, and 70% in the requirements of conventional energy for cooling. (author)

  10. Monitoring of microvascular free flaps following oropharyngeal reconstruction using infrared thermography: first clinical experiences.

    Science.gov (United States)

    Just, Maren; Chalopin, Claire; Unger, Michael; Halama, Dirk; Neumuth, Thomas; Dietz, Andreas; Fischer, Miloš

    2016-09-01

    The aim of this study is to investigate static and dynamic infrared (IR) thermography for intra- and postoperative free-flap monitoring following oropharyngeal reconstruction. Sixteen patients with oropharyngeal reconstruction by free radial forearm flap were included in this prospective, clinical study (05/2013-08/2014). Prior ("intraop_pre") and following ("intraop_post") completion of the microvascular anastomoses, IR thermography was performed for intraoperative flap monitoring. Further IR images were acquired one day ("postop_1") and 10 days ("postop_10") after surgery for postoperative flap monitoring. Of the 16, 15 transferred free radial forearm flaps did not show any perfusion failure. A significant decreasing mean temperature difference (∆T: temperature difference between the flap surface and the surrounding tissue in Kelvin) was measured at all investigation points in comparison with the temperature difference at "intraop_pre" (mean values on all patients: ∆T intraop_pre = -2.64 K; ∆T intraop_post = -1.22 K, p < 0.0015; ∆T postop_1 = -0.54 K, p < 0.0001; ∆T postop_10 = -0.58 K, p < 0.0001). Intraoperative dynamic IR thermography showed typical pattern of non-pathological rewarming due to re-established flap perfusion after completion of the microvascular anastomoses. Static and dynamic IR thermography is a promising, objective method for intraoperative and postoperative monitoring of free-flap reconstructions in head and neck surgery and to detect perfusion failure, before macroscopic changes in the tissue surface are obvious. A lack of significant decrease of the temperature difference compared to surrounding tissue following completion of microvascular anastomoses and an atypical rewarming following a thermal challenge are suggestive of flap perfusion failure.

  11. The experience of family members of ICU patients who require extensive monitoring: a qualitative study.

    Science.gov (United States)

    Smith, Claudia DiSabatino; Custard, Kristi

    2014-09-01

    A mixed methods study using family research with a phenomenological approach (n = 5 families) was conducted to explore family members' perceptions about the extensive monitoring technology used on their critically ill family member after cardiac surgery, as experienced when family members initially visited the patient in the cardiovascular intensive care unit. Five relevant themes emerged: overwhelmed by all of the machines; feelings of uncertainty; methods of coping; meaning of the numbers on the machines; and need for education.

  12. European experience on air and water pollution control: monitoring network and warning station

    Energy Technology Data Exchange (ETDEWEB)

    Aflalo, Sergio S. [Groupe Environnement S.A., Poissy (France)

    1993-12-31

    After a review of the energy consumption and pollutants emitted in the European Community, especially those concerning the `green house effect`, the author proceeded a summary of the actual legislation and Europeans directives, and also, the Best Available Technology for reducing air pollution is discussed. Original Air Quality monitoring networks performed by Environnement SA are described including measurements obtained around Paris and other areas of France. 7 refs., 11 figs.

  13. Living with childhood obesity: the experience of children enrolled in a multidisciplinary monitoring program

    OpenAIRE

    Silvia Veridiana Zamparoni Victorino; Larissa Gramazio Soares; Sonia Silva Marcon; Ieda Harumi Higarashi

    2015-01-01

    This study aimed to understand the perceptions of obesity from the perspective of obese children enrolled in a multidisciplinary monitoring program. Descriptive exploratory study of qualitative nature. Data collection occurred in December 2013, along with eight children accompanied by a child and adolescent obesity group in a municipality in northwestern Paraná, Brazil, through semi-structured interviews. Data were submitted to content analysis, from which four categories emerged: “Obesity in...

  14. Continuous Multimodality Monitoring in Children after Traumatic Brain Injury-Preliminary Experience.

    Directory of Open Access Journals (Sweden)

    Adam M H Young

    Full Text Available Multimodality monitoring is regularly employed in adult traumatic brain injury (TBI patients where it provides physiologic and therapeutic insight into this heterogeneous condition. Pediatric studies are less frequent.An analysis of data collected prospectively from 12 pediatric TBI patients admitted to Addenbrooke's Hospital, Pediatric Intensive Care Unit (PICU between August 2012 and December 2014 was performed. Patients' intracranial pressure (ICP, mean arterial pressure (MAP, and cerebral perfusion pressure (CPP were monitored continuously using brain monitoring software ICM+®, Pressure reactivity index (PRx and 'Optimal CPP' (CPPopt were calculated. Patient outcome was dichotomized into survivors and non-survivors.At 6 months 8/12 (66% of the cohort survived the TBI. The median (±IQR ICP was significantly lower in survivors 13.1±3.2 mm Hg compared to non-survivors 21.6±42.9 mm Hg (p = 0.003. The median time spent with ICP over 20 mm Hg was lower in survivors (9.7+9.8% vs 60.5+67.4% in non-survivors; p = 0.003. Although there was no evidence that CPP was different between survival groups, the time spent with a CPP close (within 10 mm Hg to the optimal CPP was significantly longer in survivors (90.7±12.6% compared with non-survivors (70.6±21.8%; p = 0.02. PRx provided significant outcome separation with median PRx in survivors being 0.02±0.19 compared to 0.39±0.62 in non-survivors (p = 0.02.Our observations provide evidence that multi-modality monitoring may be useful in pediatric TBI with ICP, deviation of CPP from CPPopt, and PRx correlating with patient outcome.

  15. Bacterial monitoring with adhesive sheet in the international space station-"Kibo", the Japanese experiment module.

    Science.gov (United States)

    Ichijo, Tomoaki; Hieda, Hatsuki; Ishihara, Rie; Yamaguchi, Nobuyasu; Nasu, Masao

    2013-01-01

    Microbiological monitoring is important to assure microbiological safety, especially in long-duration space habitation. We have been continuously monitoring the abundance and diversity of bacteria in the International Space Station (ISS)-"Kibo" module to accumulate knowledge on microbes in the ISS. In this study, we used a new sampling device, a microbe-collecting adhesive sheet developed in our laboratory. This adhesive sheet has high operability, needs no water for sampling, and is easy to transport and store. We first validated the adhesive sheet as a sampling device to be used in a space habitat with regard to the stability of the bacterial number on the sheet during prolonged storage of up to 12 months. Bacterial abundance on the surfaces in Kibo was then determined and was lower than on the surfaces in our laboratory (10(5) cells [cm(2)](-1)), except for the return air grill, and the bacteria detected in Kibo were human skin microflora. From these aspects of microbial abundance and their phylogenetic affiliation, we concluded that Kibo has been microbiologically well maintained; however, microbial abundance may increase with the prolonged stay of astronauts. To ensure crew safety and understand bacterial dynamics in space habitation environments, continuous bacterial monitoring in Kibo is required.

  16. Single center experience with intrathoracic impedance monitoring in chronic heart failure patients

    Institute of Scientific and Technical Information of China (English)

    QIAO Qing; HUA Wei; DING Li-gang; CHEN Ke-ping; WANG Jing; WANG Fang-zheng; ZHANG Shu

    2011-01-01

    Background The Medtronic InSync Sentry is the first available cardiac resynchronization therapy defibrillator (CRT-D)which can monitor fluid status by measuring intrathoracic impedance. This study was designed to observe the effectiveness of intrathoracic impedance monitoring on detecting aggravation of heart failure.Methods We retrospectively analyzed the clinical data of 14 consecutive patients. Patients were regularly followed up every 3-6 months after the implantation. At each visit, interrogation of the device was done. Patients were instructed to inform the researcher on hearing the device alert, and to take extra 40 milligrams of furosemidum if they had aggravated symptoms later. If the symptoms could not be relieved, they were asked to see a doctor. Data about heart failure hospitalization were collected from the medical record.Results During 18-48 months follow-up, a total of 7 patients encountered 28 alert events. On one hand, alert events appeared before all deteriorated symptoms and heart failure hospitalizations. On the other hand, there were 23 alerts followed by deterioration of heart failure symptoms, and 2 alerts related to 2 hospitalizations caused by pulmonary infection in one patient. Only 5 patients were hospitalized 10 times for deterioration of cardiac function.Conclusion The function of intrathoracic impedance monitoring is reliable in predicting deterioration of heart failure.

  17. An Innovative Beam Halo Monitor system for the CMS experiment at the LHC: Design, Commissioning and First Beam Results

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00344917; Dabrowski, Anne

    The Compact Muon Solenoid (CMS) is a multi-purpose experiment situated at the Large Hadron Collider (LHC). The CMS has the mandate of searching new physics and making precise measurements of the already known mechanisms by using data produced by collisions of high-energy particles. To ensure high quality physics data taking, it is important to monitor and ensure the quality of the colliding particle beams. This thesis presents the research and design, the integration and the first commissioning results of a novel Beam Halo Monitor (BHM) that was designed and built for the CMS experiment. The BHM provides an online, bunch-by-bunch measurement of background particles created by interactions of the proton beam with residual gas molecules in the vacuum chamber or with collimator material upstream of the CMS, separately for each beam. The system consists of two arrays of twenty direction-sensitive detectors that are distributed azimuthally around the outer forward shielding of the CMS experiment. Each detector is ...

  18. Interoperability Using Lightweight Metadata Standards: Service & Data Casting, OpenSearch, OPM Provenance, and Shared SciFlo Workflows

    Science.gov (United States)

    Wilson, B. D.; Manipon, G.; Hua, H.; Fetzer, E.

    2011-12-01

    Under several NASA grants, we are generating multi-sensor merged atmospheric datasets to enable the detection of instrument biases and studies of climate trends over decades of data. For example, under a NASA MEASURES grant we are producing a water vapor climatology from the A-Train instruments, stratified by the Cloudsat cloud classification for each geophysical scene. The generation and proper use of such multi-sensor climate data records (CDR's) requires a high level of openness, transparency, and traceability. To make the datasets self-documenting and provide access to full metadata and traceability, we have implemented a set of capabilities and services using known, interoperable protocols. These protocols include OpenSearch, OPeNDAP, Open Provenance Model, service & data casting technologies using Atom feeds, and REST-callable analysis workflows implemented as SciFlo (XML) documents. We advocate that our approach can serve as a blueprint for how to openly "document and serve" complex, multi-sensor CDR's with full traceability. The capabilities and services provided include: - Discovery of the collections by keyword search, exposed using OpenSearch protocol; - Space/time query across the CDR's granules and all of the input datasets via OpenSearch; - User-level configuration of the production workflows so that scientists can select additional physical variables from the A-Train to add to the next iteration of the merged datasets; - Efficient data merging using on-the-fly OPeNDAP variable slicing & spatial subsetting of data out of input netCDF and HDF files (without moving the entire files); - Self-documenting CDR's published in a highly usable netCDF4 format with groups used to organize the variables, CF-style attributes for each variable, numeric array compression, & links to OPM provenance; - Recording of processing provenance and data lineage into a query-able provenance trail in Open Provenance Model (OPM) format, auto-captured by the workflow engine

  19. CEM: Increasing productivity through the management and monitoring of experiences provided to customers

    Directory of Open Access Journals (Sweden)

    Adriana Arineli

    2015-12-01

    Full Text Available Dealing with intangible and so subtle experience is unusual and a huge challenge for management that is not used to measure what has no numbers, but maybe they need to see beyond the obvious and accessible statistics. Recently, several studies point to the importance of customer experience management (CEM. However, if the CEM is a strategy to focus on operations and processes of a business around the customers’ experiences with the company, it is essential to seek grants to structure it and find out its effectiveness. This study examines the issues involved in offering superior customer experiences on fashion retail stores in Brazil, identifying the relation between productivity and CEM. Through a research with managers of three important Brazilian clothing retail chains, it was possible to analyze the aspects that impact on the customer experience and their relevance. A questionnaire was applied to evaluate 23 variables that make up the experience of the customer and their impact on increasing productivity. Some statistical techniques were used for data processing and it was possible to realize that only 4 of the 23 items were not relevant for customer experience. It can be concluded that CEM is effective in increasing productivity and can be used as a guideline matrix management in decision-making to promote superior customer experiences. Specific characteristics of each segment suggest different impacts in every aspect. Therefore, it is crucial that each segment review its own variables that will structure the CEM. Even assuming that it is defiant see beyond the obvious, maybe this is the necessary opportunity to create real competitive advantage and longevity for companies that want to stand out and be successful over time.

  20. Invited Article: Radon and thoron intercomparison experiments for integrated monitors at NIRS, Japan

    Science.gov (United States)

    Janik, M.; Ishikawa, T.; Omori, Y.; Kavasi, N.

    2014-02-01

    Inhalation of radon (222Rn) and its short-lived decay products and of products of the thoron (220Rn) series accounts for more than half of the effective dose from natural radiation sources. At this time, many countries have begun large-scale radon and thoron surveys and many different measurement methods and instruments are used in these studies. Consequently, it is necessary to improve and standardize technical methods of measurements and to verify quality assurance by intercomparisons between laboratories. Four international intercomparisons for passive integrating radon and thoron monitors were conducted at the NIRS (National Institute of Radiological Sciences, Japan). Radon exercises were carried out in the 24.4 m3 inner volume walk-in radon chamber that has systems to control radon concentration, temperature, and humidity. Moreover, the NIRS thoron chamber with a 150 dm3 inner volume was utilized to provide three thoron intercomparisons. At present, the NIRS is the only laboratory world-wide that has carried out periodic thoron intercomparison of passive monitors. Fifty laboratories from 26 countries participated in the radon intercomparison, using six types of detectors (charcoal, CR-39, LR 115, polycarbonate film, electret plate, and silicon photodiode). Eighteen laboratories from 12 countries participated in the thoron intercomparisons, using two etch-track types (CR-39 and polycarbonate) detectors. The tests were made under one to three different exposures to radon and thoron. The data presented in this paper indicated that the performance quality of laboratories for radon measurement has been gradually increasing. Results of thoron exercises showed that the quality for thoron measurements still needs further development and additional studies are needed to improve its measuring methods. The present paper provides a summary of all radon and thoron international intercomparisons done at NIRS from 2007 to date and it describes the present status on radon and

  1. Invited Article: Radon and thoron intercomparison experiments for integrated monitors at NIRS, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Janik, M., E-mail: mirek@fml.nirs.go.jp; Ishikawa, T.; Omori, Y.; Kavasi, N. [National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage, 263-8555 Chiba (Japan)

    2014-02-15

    Inhalation of radon ({sup 222}Rn) and its short-lived decay products and of products of the thoron ({sup 220}Rn) series accounts for more than half of the effective dose from natural radiation sources. At this time, many countries have begun large-scale radon and thoron surveys and many different measurement methods and instruments are used in these studies. Consequently, it is necessary to improve and standardize technical methods of measurements and to verify quality assurance by intercomparisons between laboratories. Four international intercomparisons for passive integrating radon and thoron monitors were conducted at the NIRS (National Institute of Radiological Sciences, Japan). Radon exercises were carried out in the 24.4 m{sup 3} inner volume walk-in radon chamber that has systems to control radon concentration, temperature, and humidity. Moreover, the NIRS thoron chamber with a 150 dm{sup 3} inner volume was utilized to provide three thoron intercomparisons. At present, the NIRS is the only laboratory world-wide that has carried out periodic thoron intercomparison of passive monitors. Fifty laboratories from 26 countries participated in the radon intercomparison, using six types of detectors (charcoal, CR-39, LR 115, polycarbonate film, electret plate, and silicon photodiode). Eighteen laboratories from 12 countries participated in the thoron intercomparisons, using two etch-track types (CR-39 and polycarbonate) detectors. The tests were made under one to three different exposures to radon and thoron. The data presented in this paper indicated that the performance quality of laboratories for radon measurement has been gradually increasing. Results of thoron exercises showed that the quality for thoron measurements still needs further development and additional studies are needed to improve its measuring methods. The present paper provides a summary of all radon and thoron international intercomparisons done at NIRS from 2007 to date and it describes the

  2. Development And Testing Unmanned Aerial Systems To Study And Monitoring Volcanoes: INGV Experience Since 2004

    Science.gov (United States)

    Buongiorno, M. F.; Amici, S.; Doumaz, F.; Diaz, J. A.; Silvestri, M.; Musacchio, M.; Pieri, D. C.; Marotta, E.; Wright, K. C.; Sansivero, F.; Caliro, S.; Falcone, S.; Giulietti, F.

    2016-12-01

    Monitoring natural hazards such as active volcanoes requires specific instruments to measure many parameters (gas emissions, surface temperatures, surface deformation etc.) to determine the activity level of the volcano. Volcanoes in most cases present difficult and dangerous environment for scientists who need to take in situ measurements but also for manned aircrafts. Remote Sensing systems on board of satellite permit to measure a large number of parameters especially during the eruptive events but still show large limits to monitor volcanic precursors and phenomena at local scale (gas species emitted by fumarole or summit craters degassing plumes and surface thermal changes of few degrees). Since 2004 INGV started the analysis of unmanned Aerial Systems (UAV) to explore the operational aspects of UAV deployments. In 2006, INGV in partnership with department of Aerospace Division at University of Bologna, stared the development of a UAV system named RAVEN-INGV. The project was anticipated by a flight test on 2004. In the last years the large diffusion of smaller UAVS and drones opened new opportunities to perform the monitoring of volcanic areas. INGV teams developed strong collaboration with Jet Propulsion Laboratory (JPL) and University of Costa Rica (UCR) to cooperate in testing both UAV and miniaturized instruments to measures gas species and surface temperatures in volcanic environment. Between 2014 and 2015 specific campaigns has been performed in the active volcanoes in Italy (Campi Flegrei and Vulcano Island). The field and airborne acquisitions have also permitted the calibration and validation of Satellite data as ASTER and LANDSAT8 (in collaboration with USGS). We hope that the rapid increasing of technology developments will permit the use UAV systems to integrate geophysical measurements and contribute to the necessary calibration and validation of current and future satellite missions dedicated to the measurements of surface temperatures and gas

  3. High Latitude Scintillation Monitoring at UHF with the COMMX Experiment on TACSat4

    Science.gov (United States)

    Bernhardt, P. A.; Siefring, C. L.; Akins, K.; Nurnberger, M.

    2013-12-01

    UHF Beacon Transmissions at 253 MHz have provided high latitude scintillation monitoring from Gakona Alaska using the COMMX instrument on TACSat4. TACSat4 was constructed by the Naval Research Laboratory and was launched in September 2011 as an experimental communications satellite. Ground UHF transmissions are uplinked to TACSat4 using the 4 meter diameter antenna deployed to view the earth. These signals are coherently translated to other UHF frequency to be rebroadcast to the ground. Scintillation monitoring is achieved by taking the 401.25 MHz signals from ground DORIS beacons located in Cold Bay, Alaska; Yellowknife, Canada; Kauai, Hawaii; and Soccoro Island, Mexico. These signals are translated to 253 MHz and broadcast with the 4 meter antenna pointed to the UHF receiver located at Gakona, Alaska. The satellite antenna gain is 18 dB in this UHF band and the transmitter power is 2 Watts. The satellite is in an elliptical orbit with an inclination of 63 degrees and a perigee of 12,000 km. Doppler frequency shifts allow separation of each uplink from the ground DORIS beacons. This new scintillation monitoring system has been used to detect natural and artificial field aligned irregularity effects on the amplitude and phase of UHF carriers where typical scintillation amplitudes are 2dB or less. Using the HAARP transmitter in Alaska, TACSat4 was used to discover the artificial ionization clouds produce scintillation with as much as 16 dB and amplitude indices S4 greater than unity. This is the first demonstration of significant effects on radio scintillations using high power HF radio waves to disturb the ionosphere.

  4. Monitoring concentrations of persistent organic pollutants in the general population: the international experience.

    Science.gov (United States)

    Porta, Miquel; Puigdomènech, Elisa; Ballester, Ferran; Selva, Javier; Ribas-Fitó, Núria; Llop, Sabrina; López, Tomàs

    2008-05-01

    Assessing the adverse effects on human health of persistent organic pollutants (POPs) and the impact of policies aiming to reduce human exposure to POPs warrants monitoring body concentrations of POPs in representative samples of subjects. While numerous ad hoc studies are being conducted to understand POPs effects, only a few countries are conducting nationwide surveillance programs of human concentrations of POPs, and even less countries do so in representative samples of the general population. We tried to identify all studies worldwide that analyzed the distribution of concentrations of POPs in a representative sample of the general population, and we synthesized the studies' main characteristics, as design, population, and chemicals analyzed. The most comprehensive studies are the National Reports on Human Exposure to Environmental Chemicals (USA), the German Environmental Survey, and the Arctic Monitoring and Assessment Programme. Population-wide studies exist as well in New Zealand, Australia, Japan, Flanders (Belgium) and the Canary Islands (Spain). Most such studies are linked with health surveys, which is a highly-relevant additional strength. Only the German and Flemish studies analyzed POPs by educational level, while studies in the USA offer results by ethnic group. The full distribution of POPs concentrations is unknown in many countries. Knowledge gaps include also the interplay of age, gender, period and cohort effects on the prevalence of exposures observed by cross-sectional surveys. Local and global efforts to minimize POPs contamination, like the Stockholm convention, warrant nationwide monitoring of concentrations of POPs in representative samples of the general population. Results of this review show how such studies may be developed and used.

  5. Malaysia's Experience in the Monitoring of Investment and Results of Water Resources Management

    Science.gov (United States)

    Zakaria, Salmah Binti; Lee, Jin

    2010-05-01

    The current status of IWRM implementation in Malaysia, overview of development planning process and financial allocations together with monitoring of IWRM in Malaysia are first presented. This is followed by a case study review of Malaysia's 9th 5-year Development Plan (2005-2010) so as to provide a deeper understanding and appreciation of the current approach adopted by the Malaysian government in the formulation of development policies, project planning, budget allocation and o monitoring of projects. Arising from the review it was highlighted that the water-related, sectoral developmental objectives are found in all the 5 developmental thrusts in the 9th Malaysia Plan. This is because water is an essential natural resource and is also an economic good. Thus, it was concluded that in order for the monitoring of investments in IWRM and results to be effective and useful to support policy formulation to achieve the goal of IWRM there is a need for a collation of all information reported under the different, water-related, sectoral developmental objectives in the 9th Malaysia Plan to be organised within an IWRM framework. It was also concluded that a major IWRM challenge for Malaysia is how to make the transition from the current, narrow, sector-specific, financial and budgeting paradigm of the sectorial agencies to the “total cost” paradigm that involves taking into consideration and integrating the costs in other sectors affected by any projects proposed within a sector. The current, sectorial-focus approach, adopted in the 9th Malaysia Plan, logically measures the effectiveness of sectorial agencies by their ability to achieve their immediate sectorial goals and targets, most often with emphasis on infrastructure projects since the impacts of such projects are usually immediate and visible. However, the use of such approach alone, without taking into account the costs that are borne by other interfacing sectors, and also within the sector over the long term

  6. Implementation of dose monitoring software in the clinical routine. First experiences

    Energy Technology Data Exchange (ETDEWEB)

    Heilmaier, C.; Zuber, N.; Bruijns, B.; Weishaupt, D. [Stadtspital Triemli, Zurich (Switzerland). Dept. of Radiology and Nuclear Medicine; Ceyrolle, C. [DoseWatch, GE Healthcare, Buc (France)

    2016-01-15

    Radiation exposure of the public as a result of medical imaging has significantly increased during the last decades. To have a tool to register and control patient dose exposure, we implemented dose monitoring software at our institution and first connected our computed tomography (CT) scanners. CT dose data from July 2014 to February 2015 was retrospectively analyzed using dose monitoring software. We evaluated a number of scans above predefined dose thresholds (''alerts''), assessed reasons for alerts and compared data of two CT scanners, one located close to the emergency room (''emergency CT scanner'') and one mainly used on an outpatient basis (''clinical routine CT scanner''). To check for statistically significant differences between scanners, chi-square-tests were performed. A total of 8883 scans were acquired (clinical routine CT scanner, n = 3415; emergency CT scanner, n = 5468) during which 316 alerts were encountered (alert quota, 4 %). The overall alert quota ranged from 2 - 5 % with significantly higher values for the clinical routine CT scanner. Reasons for alerts were high BMI (51 %), patient off-centering (24 %), scan repetition (11 %), orthopedic hardware (9 %), or other (5 %). Scan repetition was necessary significantly more often with the emergency CT scanner (p = 0.019), while high BMI, off-centering and orthopedic hardware were more frequently seen with the clinical routine CT scanner (for all, p < 0.05). There was a good correlation between high body weight and dose above threshold (r = 0.585). Implementation of dose monitoring software in the clinical routine was successfully accomplished and provides important information regarding patient radiation protection.

  7. The CRRES IDM spacecraft experiment for insulator discharge pulses. [Internal Discharge Monitor

    Science.gov (United States)

    Frederickson, A. R.; Mullen, E. G.; Kerns, K. J.; Robinson, P. A.; Holeman, E. G.

    1993-01-01

    The Internal Discharge Monitor (IDM) is designed to observe electrical pulses from common electrical insulators in space service. The characteristics of the instrument are described. The IDM was flown on the Combined Release and Radiation Effects Satellite (CRRES). The sixteen insulator samples included G10 circuit boards, FR4 and PTFE fiberglass circuit boards, FEP Teflon, alumina, and wires with common insulations. The samples are fully enclosed, mutually isolated, and space radiation penetrates 0.02 cm of aluminum before striking the samples. Published data in the literature provides a simple method for determining the flux of penetrating electrons. The pulse rate is compared to the penetrating flux of electrons.

  8. Experience of molecular monitoring techniques in upstream oil and gas operations

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Anthony F.; Anfindsen, Hilde; Liengen, Turid; Molid, Solfrid [Statoil ASA (Denmark)

    2011-07-01

    For a numbers of years, molecular monitoring tools have been used in upstream oil and gas operations but the results have given only limited added value. This paper discusses the various techniques available for upstream molecular monitoring which provides scope for identification of microbial influenced problems. The methodology, which consists of analyzing solid samples using traditional as well as molecular techniques, is detailed. Two cases were studied with the objective of determining if microbial contamination was contributing to the problem. The first case was a study of amorphous deposits in production wells and mainly iron sulphide was found. The second study was of amorphous deposits in water injection wells and the analysis showed typical components of drilling and completion fluids with some organic material. Two more cases, corrosion of tubing in a water injection well and flow line corrosion, are discussed and the results are given. From the study, it can be concluded that failure can be due to several factors, chemical and biological.

  9. Design and Experiment of PZT Network-based Structural Health Monitoring Scanning System

    Institute of Scientific and Technical Information of China (English)

    Qiu Lei; Yuan Shenfang; Wang Qiang; Sun Yajie; Yang Weiwei

    2009-01-01

    The active Lamb wave and piezoelectric transducer (PZT)-based structural health monitoring (SHM) technology is a kind of efficient approach to estimate the health state of aircraft structure. In practical applications, PZT networks are needed to monitor large scale structures. Scanning many of the different PZT actuator-sensor channels within these PZT networks to achieve on-line SHM task is important. Based on a peripheral component interconnect extensions for instrumentation (PXI) platform, an active Lamb wave and PZT network-based integrated multi-channel scanning system (PXI-ISS) is developed for the purpose of practical applications of SHM, which is compact and portable, and can scan large numbers of actuator-sensor channels and perform damage assessing automatically. A PXI-based 4 channels gain-programmable charge amplifier, an external scanning module with 276 actuator-sensor channels and integrated SHM software are proposed and discussed in detail. The experimental research on a carbon fiber composite wing box of an unmanned aerial vehicle (UAV) for verifying the functions of the PXI-ISS is mainly discussed, including the design of PZTs layer, the method of excitation frequency selection, functional test of damage imaging, stability test of the PXI-ISS, and the loading effect on signals. The experimental results have verified the stability and damage functions of this system.

  10. Investment in epilepsy monitoring units improves epilepsy care—experience in a regional neuroscience centre

    LENUS (Irish Health Repository)

    McGinty, RN

    2017-08-01

    An evaluation of the clinical yield of inpatient long-term video-EEG (vEEG) in a new epilepsy monitoring unit (EMU) was undertaken, with findings compared to the centre’s prior method of bedside vEEG recording in a standard neurology ward, as reported in 2004. A retrospective analysis of neurophysiology reports for all adults who underwent elective vEEG monitoring in the EMU at Cork University Hospital between January 2015 and July 2016 was conducted. Of 115 vEEG studies in the EMU, 100 (87.0%) were deemed diagnostically conclusive, 14 (12.2%) failed to catch any clinical events and showed normal EEG throughout, and one (0.9%) captured spells of unclear clinical significance—the corresponding figures reported in 2004 for bedside vEEGs were 21.3%, 77% and 1.6%, respectively. The EMU offers a more effective method of recording inpatient vEEG, which aids decision-making and improves clinical outcomes. Some evidence-based measures which could further enhance diagnostic yield are discussed.

  11. Technologies and experience with monitoring sediments for protecting turbines from abrasion

    Science.gov (United States)

    Agrawal, Y.; Slade, W.; Pottsmith, C.; Dana, D.

    2016-11-01

    Abrasion of turbines by sediments is a constant threat in high head and high sediment load situations. It is widely recognized that larger grains cause abrasion, although no consensus on a critical size exists. Grain hardness plays a second key role. Thus monitoring of sediment concentration is highly desirable, particularly with attention paid to the large grains. This has recently become possible with LISST instruments that use laser diffraction (LD) technology. These in-line instruments measure multi-angle laser light scattering, which is converted to a particle size distribution in a pre-defined size range. In order to reach high concentrations, the instruments incorporate auto-dilution capability. The data are transmitted to the control room. Provided software displays concentration history in up to 4 size classes, and the software is capable of generating alarms when sufficiently high concentrations occur. Since no definition exists for this sufficiently high concentration, in this paper we propose an objective criterion based on the rate of revenue generation contrasted with rate of cost of turbine repair. This simple idea helps guide the plant operator to set shut-down thresholds during sediment transport events. We also introduce a lower cost, high-frequency pulsed acoustic sensor for sediment monitoring. The rather lower accuracy of this device is offset by its lower cost that is suitable for small plants.

  12. Debris flow monitoring experience in the Cancia basin (Dolomites, Northeast Italian Alps).

    Science.gov (United States)

    Stancanelli, Laura; Bernard, Martino; Gregoretti, Carlo; Berti, Matteo; Simoni, Alessandro; Lanzoni, Stefano

    2016-04-01

    The monitoring campaign presented here aims to understand the dynamics of sediment transport processes in small head-water catchments of the Italian Alps and to evaluate the rainfall thresholds for debris flow triggering. The monitored basin of Cancia is located on the Eastern Italian Dolomites, in the Belluno Province. In particular, it is situated on the left side on the Boite river valley, next to the Borca di Cadore village, and is delimited by the western slope of the Mt. Antelao. The drainage area is 1.8 km2 while the elevation ranges from 2451 m a.s.l. to 880 m a.s.l., with a slope varying from 30-40° in the upper part to 10-15° in the lower part (fan area). The basin is characterized by a lithology very common in the Italian Alps, which consist of high permeability, poorly sorted rock debris, containing boulders up to 3-4 m in diameter, and include heterogeneous scree, alluvium and old debris flow deposits. The spatial distribution of sediment is characterized by: an upper part where prevails the presence of rocks, a medium part characterized by poorly sorted rock debris and fine sediment material, and a downstream part plenty of sediment material The Cancia basin is prone to stony debris flows, owing to the plenty availability of loose and coarse sediments and frequent convective events. In particular, the smaller grain sized material is provided by the erosion of lateral slope, while gravel, pebbles and cobbles are provided by the upper part of the basin, characterized by rocky material. The precipitation regime is marked by rainfalls of short duration and high intensity, usually occurring in the summer period. The debris flow channel has began to be surveyed in August 2009 to identify the debris flow generation area. At the beginning of July 2013 topographical surveys of the channel downstream the triggering area began in order to investigate the morphological evolution of the debris flow channel from 2013 until 2015. Moreover, at the beginning of

  13. Monitoring and scoring counter-diffusion protein crystallization experiments in capillaries by in situ dynamic light scattering.

    Directory of Open Access Journals (Sweden)

    Dominik Oberthuer

    Full Text Available In this paper, we demonstrate the feasibility of using in situ Dynamic Light Scattering (DLS to monitor counter-diffusion crystallization experiments in capillaries. Firstly, we have validated the quality of the DLS signal in thin capillaries, which is comparable to that obtained in standard quartz cuvettes. Then, we have carried out DLS measurements of a counter-diffusion crystallization experiment of glucose isomerase in capillaries of different diameters (0.1, 0.2 and 0.3 mm in order to follow the temporal evolution of protein supersaturation. Finally, we have compared DLS data with optical recordings of the progression of the crystallization front and with a simulation model of counter-diffusion in 1D.

  14. Monitoring and scoring counter-diffusion protein crystallization experiments in capillaries by in situ dynamic light scattering.

    Science.gov (United States)

    Oberthuer, Dominik; Melero-García, Emilio; Dierks, Karsten; Meyer, Arne; Betzel, Christian; Garcia-Caballero, Alfonso; Gavira, Jose A

    2012-01-01

    In this paper, we demonstrate the feasibility of using in situ Dynamic Light Scattering (DLS) to monitor counter-diffusion crystallization experiments in capillaries. Firstly, we have validated the quality of the DLS signal in thin capillaries, which is comparable to that obtained in standard quartz cuvettes. Then, we have carried out DLS measurements of a counter-diffusion crystallization experiment of glucose isomerase in capillaries of different diameters (0.1, 0.2 and 0.3 mm) in order to follow the temporal evolution of protein supersaturation. Finally, we have compared DLS data with optical recordings of the progression of the crystallization front and with a simulation model of counter-diffusion in 1D.

  15. The Experimental Lakes Area: Over 45 Years of Whole Ecosystem Monitoring and Manipulation Experiments and a Focus on the Future

    Science.gov (United States)

    Emmerton, C. A.

    2015-12-01

    The IISD Experimental Lakes Area is a unique facility which has existed since 1968 and consists of 58 lakes and their watersheds set aside for research purposes. The IISD-ELA also boasts an on-site water chemistry lab, accommodations and facilities for up to 60 personnel. Since its inception in 1968 over 50 whole ecosystem experiments have been conducted at the ELA including eutrophication, acidification of lakes, environmental mercury fates, hydro-electric reservoir impacts and much more. The recent partnership between IISD and ELA has allowed ELA to refocus on freshwater research and policy development in a time where the preservation of the earth's most precious resource is of the utmost concern. In addition to water quality monitoring, the ELA is also focused on autotrophic ecology, zooplankton community structures, fish population and behaviour and food-web interactions. Monitoring all of these disciplines and their inter-relationships gives the research facility a unique perspective and along with the long term dataset stretching back to 1968 the ELA can look at historical records to monitor long term changes in the environment.

  16. Monitoring of leaked CO2 through sediment, water column and atmosphere in sub-seabed CCS experiment

    Science.gov (United States)

    Shitashima, K.; Sakamoto, A.; Maea, Y.

    2013-12-01

    CO2 capture and storage in sub-seabed geological formations (sub-seabed CCS) is currently being studied as a feasible option to mitigate the accumulation of anthropogenic CO2 in the atmosphere. In implementing sub-seabed CCS, detecting and monitoring the impact of the sequestered CO2 on the ocean environment is highly important. The first controlled CO2 release experiment, entitled 'Quantifying and Monitoring Potential Ecosystem Impacts of Geological Carbon Storage (QICS)', took place in Ardmucknish Bay, Oban, in May-July 2012. We applied the in-situ pH/pCO2/ORP sensor to the QICS experiment for detection and monitoring of leaked CO2, and carried out several observations. The on-line sensor that was connected by 400m of RS422 cable was deployed close to the CO2 leakage (bubbling) point, and the fluctuations of pH, pCO2 and ORP were monitored in real-time in a observation van on land. Three sets of off-line sensors were also placed on seafloor in respective points (release point, and two low impacted regions at 25m and 75m distant) for three months. The long-term monitoring of pH in sediment at 50cm depth under the seafloor was conducted. The spear type electrode was stabbed into sediment by diver near the CO2 leakage point. Wide-area mapping surveys of pH, pCO2 and ORP in seawater around the leakage point were carried out by AUV (REMUS-100) that some chemical sensors were installed in. The AUV cruised along the grid line in two layers of 4m and 2m above the seafloor during both of periods of low tide and high tide. Atmospheric CO2 in sea surface above the leakage point was observed by the LI-COR CO2 Analyzer. The analyzer was attached to the bow of ship, and the ship navigated a wide-area along a grid observation line during both of periods of low tide and high tide.

  17. Results of the experience with the use of varenicline in daily practice using intensive monitoring

    NARCIS (Netherlands)

    Oosterhuis, I.; Harmark, L.; Van Puijenbroek, E.

    2013-01-01

    Background: Although a concise overview of Adverse Drug Reactions (ADRs) of varenicline is known, little is known about the time related information about ADRs of varenicline such as for example latencies. Objectives: To gain insight in the experience and safety of varenicline in daily practice as r

  18. Finnish experiences of health monitoring: local, regional, and national data sources for policy evaluation

    Directory of Open Access Journals (Sweden)

    Katri Kilpeläinen

    2016-02-01

    Full Text Available Background: Finland has a long tradition of gathering information about the health and welfare of the adult population. Design: Surveys and administrative registers form the basis for national and local health monitoring in Finland. Results: Different data sources are used in Finland to develop key indicators, which can be used to evaluate how the national health policy targets have been met in different parts of the country and in different population subgroups. Progress has been shown in chronic disease risk factors, such as smoking reduction. However, some health policy targets have not been met. Socioeconomic health differences, for example, have remained large compared with other European countries. Conclusion: Although data availability for key health indicators is good in Finland, there is a need for wider and more comprehensive use of this information by political decision-makers and healthcare professionals.

  19. GPS Dynamic Monitoring Experiment and Result Analysis of Long-Span Cable-Stayed Bridge

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    For the sake of timely appraising the working condition of the bridge, measuring the dynamic characteristics of the bridge structure is very important and necessary. A GPS dynamic monitoring test was carried out in the Wuhan Baishazhou Bridge, which is one of the longest span cable-stayed bridges having been built in China. This paper introduces the experimental implementing scheme and data processing method. The vibration characteristics of the middle span of cable-stayed bridge are availably obtained by use of the spectral analytic approach. The measuring results are very identical to the theoretical designed values. The research demonstrates that, with GPS receiver of the high sampling rate and suitable data processing method, the vibration characteristics of the bridge structure can be determined with high accuracy.

  20. Monitored Anesthesia Care Versus General Anesthesia: Experience With the Medtronic CoreValve.

    Science.gov (United States)

    Palermo, Christopher; Degnan, Meredith; Candiotti, Keith; Salerno, Tomas; de Marchena, Eduardo; Rodriguez-Blanco, Yiliam

    2016-10-01

    To compare monitored anesthesia care (MAC) and general anesthesia (GA) for transcatheter aortic valve implantation (TAVI). Retrospective, case-control study. A large university-affiliated hospital system. The study comprised patients who underwent TAVI with the Medtronic CoreValve (Medtronic, Minneapolis, MN) between 2011 and 2015. None. MAC (n = 44) and GA (n = 21) were compared in 65 patients who underwent TAVI. Baseline characteristics/demographics, hospital stay, intraoperative conditions, and intensive care unit (ICU)/hospital stays were compared using the chi-square test, unpaired t-test, or binomial regression where appropriate. There were no significant differences between patient populations with regard to 30-day mortality, ICU/hospital stay, and complication rates. The GA group used more blood product. The rate of ICU readmission was greater in the GA group but did not reach statistical significance. GA provides no significant advantages over MAC during TAVI. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. First Field Experience of On-line Partial Discharge Monitoring of MV Cable Systems with location

    Energy Technology Data Exchange (ETDEWEB)

    Van der Wielen, P.; Steennis, F.

    2009-06-15

    A new measuring system is presented for the on-line monitoring and location of partial discharges (PDs) in medium-voltage power cables. The system uses two inductive sensors, each at one cable end. The measuring system is called PD-OL, which stands for PD detection Online with Location. A pulse injection system is used for the time synchronization of the data intake at both cable ends and for the on-line calibration. PD data is send via internet to the KEMA Control Center for interpretation and final presentation, made visible on a secured website for the network owners. This paper discusses the basics of PD-OL and a number of measurement results.

  2. Oscillatory hydraulic testing as a strategy for NAPL source zone monitoring: Laboratory experiments

    Science.gov (United States)

    Zhou, YaoQuan; Cardiff, Michael

    2017-05-01

    Non-aqueous phase liquids (NAPLs) have a complex mode of transport in heterogeneous aquifers, which can result in pools and lenses of NAPLs (the ;source zone;) that are difficult to detect and can cause long-term contamination via slow dissolution into groundwater (the ;dissolved plume;). Characterizing the extent and evolution of NAPL contamination within the source zone is a useful strategy for designing and adapting appropriate remedial actions at many contaminated sites. As a NAPL flows into a given aquifer volume, the effective hydraulic conductivity (K) and specific storage (Ss) of the volume changes associated with the viscosity and compressibility of the impinging fluid, meaning that NAPL movement may be detectable with hydraulic testing. Recently, the use of oscillatory pumping tests - in which sinusoidal pumping variations are implemented and oscillatory pressure changes are detected at monitoring locations - has been suggested as a low-impact hydraulic testing strategy for characterizing aquifer properties (Cardiff et al., 2013; Zhou et al., 2016). Here, we investigate this strategy in an experimental laboratory sandbox where dyed vegetable oil is injected and allowed to migrate as a NAPL. Initial qualitative analyses demonstrate that measurable changes in pressure signal amplitude and phase provide clear evidence for NAPL plume emplacement and migration. Using the approach developed in Zhou et al. (2016), we then apply tomographic analyses to estimate the location of effective K changes (representing fluid changes) and their movement throughout time. This approach provides a method for monitoring ongoing NAPL movement without net extraction or injection of fluid, making it advantageous in field remediation applications.

  3. Dust Impact Monitor (DIM) onboard Rosetta/Philae: Comparison of experimental results and the theory behind the experiment

    Science.gov (United States)

    Flandes, Alberto; Krüger, Harald; Loose, Alexander; Sperl, Matthias; Jürgen Seidensticker, Klaus; Fischer, Hans-Herbert; Arnold, Walter

    2013-08-01

    The Dust Impact Monitor (DIM) experiment on board the Rosetta spacecraft's lander, Philae, is a cube with three sides covered with piezo-electric (PZT) sensors (total sensitive area: ≈70cm2), aimed at measuring the physical properties of millimetric and sub-millimetric dust particles that move near the surface of comet 67P/Churyumov - Gerasimenko. In this work we study the performance of the DIM Flight Spare (FS) unit based on impact experiments and compare the measurements with the sensor's expected theoretical behavior as derived from Hertz' theory of elastic impact. We present the results of impact experiments performed with spherical particles of different densities and elastic properties. We performed two types of experiments: (a) we analyze the performance of the different sensor sides under identical impacts, and (b) we investigate the performance of DIM under impacts of different materials and different impact speeds. We discuss the possible influence of the microstructure of the PZT sensor on the signal strength and its variation with position of the impacting particles. Our results show that the signal strength and the contact times measured with the DIM PZT sensors can be well approximated by Hertz' contact mechanics.

  4. User experiences of wearable activity monitor among 3-6-year-old preschool children – Are children willing to wear monitor 7 days 24 hours per day?

    Directory of Open Access Journals (Sweden)

    Suvi Määttä

    2015-10-01

    This study was conducted as a part of long-term DAGIS project that aims to improve the health behaviors and diminish socioeconomic inequalities in health behaviors among preschool children in Finland. A large cross-sectional survey is conducted in autumn 2015. Children (N=800, aged 3-6 years wear Actigraph WGT3X-BT accelerometer for seven days, 24 hours per day. Simultaneously with accelerometer use, parents fill in diary with informing the user experiences of accelerometer and possible non-wearing times. Parents are advised that the child wears accelerometer 24 hours and remove the belt only when in water (e.g. in shower. The accelerometer data are checked straight after data collection. Choi (2011 wear time analyses are conducted for data. The device acceptability, compliance for wearing times and reported barriers for using accelerometer 24 hours in seven days among 3-6-year-old children are reported. Conclusions This study provides new information about the usability of wearable activity monitors among 3-6-year-old children, an age group that is less studied.

  5. A time domain experiment with Swift: monitoring of seven nearby galaxies

    Science.gov (United States)

    Andreoni, I.; D'Avanzo, P.; Campana, S.; Branchesi, M.; Bernardini, M. G.; Della Valle, M.; Mannucci, F.; Melandri, A.; Tagliaferri, G.

    2016-03-01

    Context. Focused on the study of transient sources, time domain astronomy today is one of the most active and growing areas of research in astronomy. Most of the present and planned surveys aimed at carrying out time domain studies work in the optical band and founded their searching strategies on fixed cadences. Although nothing similar currently exists in the X-ray and ultraviolet (UV) bands, the Swift satellite is certainly the most appropriate available instrument to carry out such surveys. Aims: We aimed to detect a supernova (SN) shock breakout (SBO) in nearby galaxies. The SBO marks the first escape of radiation from the blast wave that breaks through the photosphere of the star and launches the SN ejecta. The detection of an SBO is a diagnostic for the radius of the progenitor star and the ratio of explosion energy to ejecta mass. It also allows us to determine the onset of the explosion with an accuracy of a few hours to a few seconds. Methods: Using the XRT and UVOT instruments onboard the Swift satellite, we carried out a weekly cadenced, six-month monitoring of seven nearby galaxies: NGC 1084, NGC 2207/IC 2163, NGC 2770, NGC 4303/M 61, NGC 3147, NGC 3690, and NGC 6754. We searched for variable or transient sources in the collected data. These galaxies were selected because they are close (distance ≤50 Mpc), small enough to fit in the Swift/UVOT field of view, and are hosts of at least three SNe in the past 20 yr. Results: We found no evidence for an SN SBO event. Five objects located within the light of the sample galaxies were found to be variable in the X-ray and/or in the UV. These include mainly background active galactic nucleus and unresolved ULX in NGC 3690. In addition to these objects, we found two variable Galactic sources: the known nova CP Draconis (which experienced an outburst during our monitoring) and an uncatalogued eclipsing binary. Conclusions: Despite the lack of SBO detections, the results of our explorative study encourage the

  6. First Experiences of Beam Presence Detection Based on Dedicated Beam Position Monitors

    CERN Document Server

    Jalal, A; Gasior, M; Todd, B

    2011-01-01

    High intensity particle beam injection into the LHC is only permitted when a low intensity pilot beam is already circulating in the LHC. This requirement addresses some of the risks associated with high intensity injection, and is enforced by a so-called Beam Presence Flag (BPF) system which is part of the interlock chain between the LHC and its injector complex. For the 2010 LHC run, the detection of the presence of this pilot beam was implemented using the LHC Fast Beam Current Transformer (FBCT) system. However, the primary function of the FBCTs, that is reliable measurement of beam currents, did not allow the BPF system to satisfy all quality requirements of the LHC Machine Protection System (MPS). Safety requirements associated with high intensity injections triggered the development of a dedicated system, based on Beam Position Monitors (BPM). This system was meant to work first in parallel with the FBCT BPF system and eventually replace it. At the end of 2010 and in 2011, this new BP...

  7. Living with childhood obesity: the experience of children enrolled in a multidisciplinary monitoring program

    Directory of Open Access Journals (Sweden)

    Silvia Veridiana Zamparoni Victorino

    2015-02-01

    Full Text Available This study aimed to understand the perceptions of obesity from the perspective of obese children enrolled in a multidisciplinary monitoring program. Descriptive exploratory study of qualitative nature. Data collection occurred in December 2013, along with eight children accompanied by a child and adolescent obesity group in a municipality in northwestern Paraná, Brazil, through semi-structured interviews. Data were submitted to content analysis, from which four categories emerged: “Obesity in children’s perspective”; “Being an obese child”; “Eating and the practice of physical exercise in the routine of obese children”; and “Living with obesity: social and family implications for children.” It was verified the negative impact of obesity on children’s lives, justifying the importance of multidisciplinary follow-up through group activities, seeking a comprehensive care. Nursing is accountable for planning activities of health promotion and control of this disease, in order to improve the quality of life.

  8. Systematic profiling to monitor and specify the software refactoring process of the LHCb experiment

    Science.gov (United States)

    Couturier, Ben; Kiagias, E.; Lohn, Stefan B.

    2014-06-01

    The LHCb upgrade program implies a significant increase in data processing that will not be matched by additional computing resources. Furthermore, new architectures such as many-core platforms can currently not be fully exploited due to memory and I/O bandwidth limitations. A considerable refactoring effort will therefore be needed to vectorize and parallelize the LHCb software, to minimize hotspots and to reduce the impact of bottlenecks. It is crucial to guide refactoring with a profiling system that gives hints to regions in source-code for possible and necessary re-engineering and which kind of optimization could lead to final success. Software optimization is a sophisticated process where all parts, compiler, operating system, external libraries and chosen hardware play a role. Intended improvements can have different effects on different platforms. To obtain precise information of the general performance, to make profiles comparable, reproducible and to verify the progress of performance in the framework, it is crucial to produce profiles more systematically in terms of regular profiling based on representative use cases and to perform regression tests. Once a general execution, monitoring and analysis platform is available, software metrics can be derived from the collected profiling results to trace changes in performance back and to create summary reports on a regular basis with an alert system if modifications led to significant performance degradations.

  9. Challenges in Getting Building Performance Monitoring Tools for Everyday Use: User Experiences with A New Tool

    Directory of Open Access Journals (Sweden)

    Heikki Ihasalo

    2014-05-01

    Full Text Available There is a need for building performance monitoring because it is common that buildings do not perform as intended. A number of advanced tools for the purpose have been developed within the last tens of years. However, these tools have not been widely adopted in real use. A new tool presented here utilizes building automation data and transforms the data into a set of performance metrics, and is capable of visualizing building performance from energy, indoor conditions, and HVAC (heating, ventilation and air conditioning system perspectives. The purpose of this paper is to study the users’ perceptions of the use of tool. The research method was semi-structured interviews. Although the users were satisfied with the solution in general, it was not taken into operative use. The main challenges with the use of the solution were related to accessibility, trust, and management practices. The interviewees were struggling to manage with numerous information systems and therefore had problems in finding the solution and authenticating to it. All the interviewees did not fully trust the solution, since they did not entirely understand what the performance metrics meant or because the solution had limitations in assessing building performance. Management practices are needed to support the performance measurement philosophy.

  10. A time domain experiment with Swift: monitoring of seven nearby galaxies

    CERN Document Server

    Andreoni, Igor; Campana, Sergio; Branchesi, Marica; Bernardini, Maria Grazia; Della Valle, Massimo; Mannucci, Filippo; Melandri, Andrea; Tagliaferri, Gianpiero

    2016-01-01

    We aimed to detect a supernova (SN) shock breakout (SBO) with observations in time domain. The SBO marks the first escape of radiation from the blast wave that breaks through the photosphere of the star and launches the SN ejecta, and peaks in the ultraviolet and soft X-ray bands. The detection of a SBO allows determining the onset of the explosion with an accuracy from a few hours to a few seconds. Using the XRT and UVOT instruments onboard the Swift satellite we carried out a weekly cadenced, six months lasting monitoring of seven nearby (distance <50 Mpc) galaxies, namely NGC1084, NGC2207/IC2163, NGC2770, NGC4303/M61, NGC3147, NGC3690, NGC6754. We searched for variable/transient sources in the collected data. We found no evidence for a SN SBO event, but we discovered five objects located within the light of the sample galaxies that are variable in the X-ray and/or in the UV. Our sample galaxies are within the Universe volume that will be reached by the forthcoming advanced gravitational waves (GW) detec...

  11. Analysis, monitoring, and management of quality of experience in video delivery services over IP

    OpenAIRE

    Pérez García, Pablo, 1961

    2013-01-01

    Esta tesis estudia la monitorización y gestión de la Calidad de Experiencia (QoE) en los servicios de distribución de vídeo sobre IP. Aborda el problema de cómo prevenir, detectar, medir y reaccionar a las degradaciones de la QoE desde la perspectiva de un proveedor de servicios: la solución debe ser escalable para una red IP extensa que entregue flujos individuales a miles de usuarios simultáneamente. La solución de monitorización propuesta se ha denominado QuEM(Qualitative Experience Monito...

  12. The effects of video compression on acceptability of images for monitoring life sciences' experiments

    Science.gov (United States)

    Haines, Richard F.; Chuang, Sherry L.

    1993-01-01

    Current plans indicate that there will be a large number of life science experiments carried out during the thirty year-long mission of the Biological Flight Research Laboratory (BFRL) on board Space Station Freedom (SSF). Non-human life science experiments will be performed in the BFRL. Two distinct types of activities have already been identified for this facility: (1) collect, store, distribute, analyze and manage engineering and science data from the Habitats, Glovebox and Centrifuge, (2) perform a broad range of remote science activities in the Glovebox and Habitat chambers in conjunction with the remotely located principal investigator (PI). These activities require extensive video coverage, viewing and/or recording and distribution to video displays on board SSF and to the ground. This paper concentrates mainly on the second type of activity. Each of the two BFRL habitat racks are designed to be configurable for either six rodent habitats per rack, four plant habitats per rack, or a combination of the above. Two video cameras will be installed in each habitat with a spare attachment for a third camera when needed. Therefore, a video system that can accommodate up to 12-18 camera inputs per habitat rack must be considered.

  13. Student and staff experiences of attendance monitoring in undergraduate obstetrics and gynecology: a cross-sectional survey

    Directory of Open Access Journals (Sweden)

    Deane RP

    2016-04-01

    students questioned the need for recording attendance at every classroom-based activity. Most students felt that the logbook facilitated access to learning experiences during the rotation (n=90/128, 71%. Staff felt that the process of signing logbooks improved their interaction with students (n=6/8, 75%. Conclusion: The survey showed that the use of a paper-based logbook to record medical student attendance with tutor signatures across all clinical and classroom-based learning activities was acceptable and practical for students and staff and was felt to facilitate access to learning opportunities. The study provides medical educators with evidence to support monitoring of attendance within clinical rotations. Keywords: attendance, attendance monitoring, clinical learning environment, logbook, medical students, obstetrics and gynecology

  14. Field experience with a novel pipe protection and monitoring system for large offshore pipeline construction projects

    Energy Technology Data Exchange (ETDEWEB)

    Magerstaedt, Michael; Blitz, Gunther [ROSEN Swiss AG, Stans (Switzerland); Sabido, Carlos E. [ROSEN Technology and Research Center, Lingen (Germany)

    2012-07-01

    For pipe joints stored during large-scale offshore pipeline construction projects, corrosion protection as well as protection from physical damage of pipelines is very important. Integrity Management does not just start with the operation of a pipeline. In the past, with the much lower risks and cost at stake in on shore constriction, this factor was often overlooked. Sometimes, newly laid pipelines failed upon hydrostatic testing or even during operation. Causes were corrosion or damage the pipe joints took before pipeline laying. For offshore projects, the cost and consequences associated with such failures are orders of magnitude higher and must be avoided by all means. Within six months from the conception of the idea, a system was developed and deployed that protected (and in part still protects) a large number of pipe joints used in a European offshore gas pipeline project more than 2000 km. The pipe joints were physically protected from corrosion, interior contamination, and condensation. At the same time, the system provided real-time monitoring of more than 100'000 pipe joints stored at 5 storage yards distributed over 3 countries with distances of more than 1200 km apart from each other. Every single joint was identified with its location and status at every time during the storage period. Any third-party interference was transmitted to a central control room in real time as well. Protection of the pipe joints was provided vs.: corrosion of pipe joint end cutbacks exposed to the maritime climate for up to 2 years; contamination of the pipe interior by: foreign material, dirt, water, ice, animals. Third party damage to the pipe joints; damage to the protection system or to the transmission network; fire; theft of pipe joints or other equipment. System features were: modular pipe caps that, protect the pipe interior, cover both inner and outer cutback, allow ventilation of the pipe interior, continuously monitor each pipe joint for third party damage

  15. Studies on calibration and validation of data provided by the Global Ozone Monitoring Experiment GOME on ERS-2 (CAVEAT). Final report; Studie zur Kalibrierung und Validation von Daten des Global Ozone Monitoring Experiments GOME auf ERS-2 (CAVEAT). Endbericht

    Energy Technology Data Exchange (ETDEWEB)

    Burrows, J.P.; Kuenzi, K.; Ladstaetter-Weissenmayer, A.; Langer, J. [Bremen Univ. (Germany). Inst. fuer Umweltphysik; Neuber, R.; Eisinger, M. [Alfred-Wegener-Institut fuer Polar- und Meeresforschung, Potsdam (Germany)

    2000-04-01

    The Global Ozone Monitoring Experiment (GOME) was launched on 21 April 1995 as one of six scientific instruments on board the second European remote sensing satellite (ERS-2) of the ESA. The investigations presented here aimed at assessing and improving the accuracy of the GOME measurements of sun-standardized and absolute radiation density and the derived data products. For this purpose, the GOME data were compared with measurements pf terrestrial, airborne and satellite-borne systems. For scientific reasons, the measurements will focus on the medium and high latitudes of both hemispheres, although equatorial regions were investigated as well. In the first stage, operational data products of GOME were validated, i.e. radiation measurements (spectra, level1 product) and trace gas column densities (level2 product). [German] Am 21. April 1995 wurde das Global Ozone Monitoring Experiment (GOME) als eines von insgesamt sechs wissenschaftlichen Instrumenten an Bord des zweiten europaeischen Fernerkundungssatelliten (ERS-2) der ESA ins All gebracht. Das Ziel dieses Vorhabens ist es, die Genauigkeit der von GOME durchgefuehrten Messungen von sonnennormierter und absoluter Strahlungsdichte sowie der aus ihnen abgeleiteten Datenprodukte zu bewerten und zu verbessern. Dazu sollten die GOME-Daten mit Messungen von boden-, flugzeug- und satellitengestuetzten Systemen verglichen werden. Aus wissenschaftlichen Gruenden wird der Schwerpunkt auf Messungen bei mittleren und hohen Breitengraden in beiden Hemisphaeren liegen. Jedoch wurden im Laufe des Projektzeitraumes auch Regionen in Aequatornaehe untersucht. Im ersten Schritt sollen operationelle Datenprodukte von GOME validiert werden. Dieses sind Strahlungsmessungen (Spektren, Level1-Produkt) und Spurengas-Saeulendichten (Level2-Produkt). (orig.)

  16. Multi-technique monitoring of CO2 leakage from an engineered CO2 leakage experiment

    Science.gov (United States)

    Zhou, X.; Apple, M. E.; Dobeck, L.; Cunningham, A. B.; Spangler, L.

    2012-12-01

    Monitoring of canopy and soil geophysical and geochemical properties in vadose zone by multiple techniques were carried out from 1999 to 2012 using an engineered CO2 release to simulate the CO2 leakage from CO2 storage at an agricultural plot at Bozeman, MT. The CO2 release was based on a horizontally-drilled well of 100 m at a depth of about 2.0-2.3m (Fig.1). Techniques utilized include hyperspectral and infrared radiation of various vegetations, electric conductivity in soil, magnetic field at the ground surface, and soil gas composition and dynamics using various gas sensors and soil moisture sensors. Measurements were made at several sites along a transect perpendicular to the releasing well, along which the soil CO2 concentration attenuated from high to normal condition at control site. The response of the canopy hyperspectral reflectance, infrared radiation, soil geophysical properties such as soil electric conductivity, top soil magnetic susceptibility and magnetic field, soil gas composition such as CO2 and O2 concentration to CO2 release at different rates were quantified and will be shown at this presentation. Fig.2 shows some examples of the results. The different responses at the impact and control sites are used to assess the effectiveness for CO2 surface and near-surface detection when a possible CO2 leakage occurs.ig.1. A schematic showing the injection and release of CO2 at an agricultral plot in Bozeman, MT. ig.2. Some examples of results showing the response of vegetation, hyperspectral reflectance, soil electric conductivity, soil O2 concentration to the release of CO2.

  17. High-Speed Monitoring of Dust Particles in ITER ELMs Simulation Experiments with QSPA Kh-50

    Directory of Open Access Journals (Sweden)

    Vadym A. Makhlaj

    2013-01-01

    Full Text Available Dust generation under powerful plasma stream impacts has been studied in ITER ELM simulation experiments with QSPA Kh-50 plasma accelerator. Repetitive plasma exposures of tungsten have been performed by 0.25 ms plasma pulses and the heat load varied in the range (0.1÷1.1 MJm-2. Main characteristics of dust particles such as a number of ejected particles, their velocity, angular distribution and start time from the surface are investigated. Dust particles have not been observed under heat load below the cracking threshold. Quantity of dust particles rises with increasing heat load. Average velocities of dust particles are found to be strongly dependent on their start time from the surface after beginning of plasma-surface interaction. Maximal velocity achieved a few tens of meters per second.

  18. Monitoring Ground Subsidence in Hong Kong via Spaceborne Radar: Experiments and Validation

    Directory of Open Access Journals (Sweden)

    Yuxiao Qin

    2015-08-01

    Full Text Available The persistent scatterers interferometry (PSI technique is gradually becoming known for its capability of providing up to millimeter accuracy of measurement on ground displacement. Nevertheless, there is still quite a good amount of doubt regarding its correctness or accuracy. In this paper, we carried out an experiment corroborating the capability of the PSI technique with the help of a traditional survey method in the urban area of Hong Kong, China. Seventy three TerraSAR-X (TSX and TanDEM-X (TDX images spanning over four years are used for the data process. There are three aims of this study. The first is to generate a displacement map of urban Hong Kong and to check for spots with possible ground movements. This information will be provided to the local surveyors so that they can check these specific locations. The second is to validate if the accuracy of the PSI technique can indeed reach the millimeter level in this real application scenario. For validating the accuracy of PSI, four corner reflectors (CR were installed at a construction site on reclaimed land in Hong Kong. They were manually moved up or down by a few to tens of millimeters, and the value derived from the PSI analysis was compared to the true value. The experiment, carried out in unideal conditions, nevertheless proved undoubtedly that millimeter accuracy can be achieved by the PSI technique. The last is to evaluate the advantages and limitations of the PSI technique. Overall, the PSI technique can be extremely useful if used in collaboration with other techniques, so that the advantages can be highlighted and the drawbacks avoided.

  19. Orthotics, prosthesis and mobility aids (OPM dispensation in the Regional Health Department of the 3RD Region of Sao Paulo State

    Directory of Open Access Journals (Sweden)

    Camila Caminha Caro

    2014-12-01

    Full Text Available Objective: To identify the process of dispensation of orthotics, prostheses and mobility aids (OPM by the Unified Health System (SUS in the Regional Health Department of the 3rd Region (DRSIII of Sao Paulo state; perform a mapping of the existing physical rehabilitation services in that region; and subsequently correlate the data with applicable laws. Methodology: This is an exploratory cross-sectional qualitative study whose subjects were the main professionals involved in the process of OPM dispensation, or responsible for their acquisition flow in the cities of that region. Data collection was carried out through a semi-structured questionnaire, developed by the researchers themselves, composed of questions aiming to identify the physical rehabilitation centers in the towns, the staff members involved, the provision of assistive technology through SUS, delivery time and existence of waiting lists. Results and discussion: The data were statistically measured, categorized, described and correlated with the current legislation aimed to guarantee access to assistive technology. We observed that the practice around this resource in the 3rd region concentrates in a single care center, causing long waits and poor efficiency of the services provided, in addition to maintaining a paternalistic aspect. Conclusion: This study provides evidence that, although the right to access to assistive technology is legally guaranteed, there are still many difficulties and challenges around this practice.

  20. Precision monitoring and calibration of the high-voltage for the KATRIN experiment; Praezisionsueberwachung und Kalibration der Hochspannung fuer das KATRIN-Experiment

    Energy Technology Data Exchange (ETDEWEB)

    Thuemmler, T.

    2007-11-12

    The goal of the KATRIN(KArlsruhe TRIritium Neutrino) Experiment is to directly determine the neutrino rest mass from the kinematics of the tritium-{beta}-decay. KATRIN uses the high resolution and luminosity of a spectrometer following the MAC-E filter principle. Based on the experience of the successful predecessor experiments in Mainz and Troisk and the improved experimental technology, KATRIN aims to reach a sensitivity on the neutrino mass of 0.2 eV/c{sup 2} (90% C.L.). One of the few systematic uncertainties that have to be reduced to meet this goal is the uncertainty of measuring and monitoring the potential of the electrostatic filter of the spectrometer. In tritium measurement mode voltages of about U{sub 0} =-18.6 kV have to be permanently monitored with a maximum uncertainty of 3.3 ppm ({approx} 61mV at U{sub 0}), in order not to add more than {delta}m{sup 2}{sub {nu}{sub ec}}{sup 4} {<=} 0.0075 eV{sup 2} to the total systematic uncertainty. The goal of this work is to build a new precision high voltage divider in cooperation with PTB Braunschweig that reaches an uncertainty of about 1 ppm at voltages up to 35 kV. The divider is based on a new type of precision resistors, which have been screened with respect to their warm up drift and their temperature coefficient at the ppm level. By combining 100 of the best matching samples, the mutual warm up effect could be reduced to a computed value of <0.02 ppm. The precision resistors are mounted in a shielded and temperature stabilized vessel under N{sub 2} gas. The properties of both installed low voltage outputs with the ratios 1972:1 and 3944:1 have been repeatedly calibrated with about one year time difference at the DC high voltage laboratory (division 2.31) of PTB. The performance of the new divider in real measurements has been tested with the prototype of the new condensed {sup 83m}Kr calibration source (CKrS) [Ost08] at the Mainz spectrometer. Detailed stability investigations of the energy of the {sup

  1. Planning the improvement of seismic monitoring in a volcanic supersite: experience on Mt. Etna

    Science.gov (United States)

    D'Alessandro, Antonino; Scarfi, Luciano; Scaltrito, Antonio; Aiesi, Giampiero; Di Prima, Sergio; Ferrari, Ferruccio; Rapisarda, Salvatore

    2013-04-01

    Etna is one of the most active volcanoes in the world and one of the most intriguing natural laboratories for the understanding of eruptive processes and lava uprising in basalt-type volcanic environments; indeed, it is considered, by the scientific international community, together with the Vesuvius and the Hawaiian Islands, as a volcanic supersite. Its activity is continuously monitored by the Osservatorio Etneo of the Istituto Nazionale di Geofisica e Vulcanologia (INGV), by means of an array of integrated multidisciplinary techniques. In particular, Etna seismicity is recorded by a dense local seismic network (ESN- Etna Seismic Network), which, nowadays, consists of about 40 real-time seismic stations, many of which equipped with broadband velocity and accelerometer sensors. The data are analyzed routinely in detail by the Osservatorio Etneo staff, producing daily and periodic reports and bulletins of the earthquakes located in the whole Sicily and southern Calabria region. In the last decades, seismological observations provided important information on both the dynamics and internal structure of the volcano, in addition to their interaction with the regional tectonic structures. In the last year, in the framework of the VULCAMED project, an INGV workgroup has taken on the task of developing the existing seismic network through the installation of new measurement stations. By considering the spatial distribution of earthquakes in the area, the presence of structures known as seismically active and through extensive geological-geophysical surveys, ten potential new sites were identified. In the following months, some of these sites will complement the existing network. The choice of optimal sites must clearly be made through a careful analysis of environmental noise, of the possible logistics, technical and broadcast problems, but must also take into account the geometry of the existing seismic network. For this purpose, we applied the Seismic Network

  2. Monitoring the hospital management of acute asthma: the Italian Pediatric Network experience.

    Science.gov (United States)

    Martelli, A G; Bianchi, R; Boldrighini, B; Bosoni, M; De Vuono, A; Flores D'Arcais, A; Gargantini, G; Longhi, R; Ortisi, M T; Racchi, E; Parola, L

    2016-11-01

    The Study Group on Accreditation and Quality Improvement of the Italian Society of Pediatrics has developed an observational study about the hospital management of pediatric patients affected by severe asthma, in order to evaluate how the Guidelines for severe asthma in childhood are applied in the daily practice. This study included patients between 2 and 17 years, hospitalized or under short intensive observation for acute asthma. The data collection was carried out through the compilation of on-line forms. The statistical technique used was the Chi Square test. 409 forms were filled in by 32 Italian Centers. 17% of the patients showed severe asthma, 59% moderate and 24% mild. On arrival at the Emergency Room the oximetry was measured in 95% of the patients, the respiratory rate in 64% while the heart rate in 88% of them. 48% of the children were exposed to chest X-ray. More than half of the children received oxygen therapy, 98.5% received short-acting beta-2 agonists and systemic steroid therapy was given to 82% of children, mainly orally. At discharge only half of the children were provided with written instructions for the management of any subsequent asthmatic episode. The analysis of the collected data highlights that not all the children had their oxygen saturation measured, although this parameter is one of the main indicators of disease severity, as well as the respiratory rate, which was detected in a minimal percentage of cases. The frequency of chest X-ray was extremely high, even though it does not have any indication in the majority of asthma cases. The evaluation of the therapeutic treatment denotes an adequate use of the oxygen therapy according to the oximetry values found on arrival, but an abuse of steroid therapy. Critical issues emerge at discharge: children are not always educated about the home management of the disease and the self-evaluation of the illness seriousness. The pediatric network has become an excellent system of monitoring of

  3. Green roof and storm water management policies: monitoring experiments on the ENPC Blue Green Wave

    Science.gov (United States)

    Versini, Pierre-Antoine; Gires, Auguste; Fitton, George; Tchiguirinskaia, Ioulia; Schertzer, Daniel

    2015-04-01

    Currently widespread in new urban projects, green roofs have shown a positive impact on urban runoff at the building/parcel scale. Nevertheless, there is no specific policy promoting their implementation neither in Europe nor in France. Moreover they are not taken into account (and usually considered as an impervious area) in the sizing of a retention basin for instance. An interesting example is located in the heart of the Paris-East Cluster for Science and Technology (Champs-sur-Marne, France). Since 2013 a large (1 ha) wavy-form vegetated roof (called bleu green wave) is implemented. Green roof area and impervious areas are connected to a large retention basin, which has been oversized. The blue green wave represents a pioneering site where an initially amenity (decorative) design project has been transformed into a research oriented one. Several measurement campaigns have been conducted to investigate and better understand the hydrological behaviour of such a structure. Rainfall, humidity, wind velocity, water content and temperature have been particularly studied. The data collected are used for several purposes: (i) characterize the spatio-temporal variability of the green roof response, (ii) calibrate and validate a specific model simulating its hydrological behavior. Based on monitoring and modeling results, green roof performances will be quantified. It will be possible to estimate how they can reduce stormwater runoff and how these performances can vary in space and in time depending on green roof configuration, rainfall event characteristics and antecedent conditions. These quantified impacts will be related to regulation rules established by stormwater managers in order to connect the parcel to the sewer network. In the particular case of the building of a retention basin, the integration of green roof in the sizing of the basin will be studied. This work is funded by the European Blue Green Dream project (http://bgd.org.uk/, funded by Climate

  4. Monitoring the fate and transport of deicing chemicals in lysimeter experiments

    Science.gov (United States)

    Lißner, H.; Wehrer, M.; Totsche, K. U.

    2012-04-01

    Large amounts of the deicing chemicals (DIC) propylene glycol (PG) and formate are spread for removal of snow and ice on the aircrafts and airfields every winter. A considerable amount of these chemicals are carried into surrounding areas, where they mix with snow and infiltrate in the soil during snowmelt. Even though DIC are easily degradable, the high mobility and the high biological oxygen demand of PG in particular can influence the hydrogeochemistry of the unsaturated and saturated zone. The aims of the study were to evaluate and quantify transport of deicing chemicals during snowmelt under field conditions, and to study effects of DIC degradation on the hydrogeochemistry of the unsaturated zone. Eight undisturbed soil cores (0.3 m x 1 m, 0.071 m3) were retrieved at the Gardermoen Airport, Norway, and installed as non-weighable small scale lysimeters at a nearby field site. Before snowmelt in March 2010, a mix of snow containing 350 g/m2 PG, 71 g/m2 formate, and 17 g/m2 of bromide were added to the lysimeters. To determine the fate and transport of PG we monitored PG and its metabolites, bromide, manganese, and iron in the seepage water. High cumulative infiltration and marginal degradation of PG during the snowmelt period allowed up to 50 % of the PG to leave the upper, microbially most active, region of the soil. Only marginal concentrations of formate were analysed in all lysimeters, indicating fast degradation and favoured metabolism by soil bacteria compared to PG. Low contents of metabolites and the concurrent breakthrough of PG and Br in the seepage water even imply that PG was not significantly degraded before June. Redox values down to 200 mV in April, the detection of propionate and manganese, as well as a rise in pH, suggest partially anearobic localities in the soil, not only during high soil water saturation in April and May but also during summer when PG degradation was very efficient. In the longterm, the intense depletion of electron acceptors

  5. Monitoring a shallow geothermal experiment in a sandy aquifer using electrical resistivity tomography: a feasibility study

    Science.gov (United States)

    Hermans, Thomas; Vandenbohede, Alexander; Nguyen, Frederic; Lebbe, Luc

    2010-05-01

    The use of low-enthalpy geothermal ressources is increasingly growing in Europe and around the world. This domain constitutes an essential field of research and development in the diversification of energy ressources to hinder global warming. The advantages of very low temperature systems are, first, that they are much more available than the geothermal high temperature, since the underground often contains important shallow aquifers (e.g. alluvial plains), and second, that their exploitation involve relatively low costs of implementation. Very low energy systems exhibit underground fluid with a temperature ranging from 5 to 30 ° C, which may be used for cooling or heating. The two main modes of exploitation of geothermal energy rely on the extraction of the hydrothermal fluid in the aquifer from wells and on the circulation of a heat transfer fluid in a closed and buried geothermal circuit. Underground heat exchange and overall exploitation system design may be undertaken in an optimized and sustainable fashion if the parameters governing the coupled heat transport and flow equations are know to a certain degree. As for many underground reservoir problems, sufficient knowledge on the distribution of the parameters of interests (e.g. thermal conductivity, thermal diffusivity, thermomechanic dispersitivity, effective porosity) must be obtained to perform reliable predictions. Designing novel experiments to estimate those parameters in-situ is therefore essential. In this framework, we examine the feasibility of a thermal tracer experiment similar to the ones performed in hydrogeology or hydrogeophysics. The test consists in following the evolution of a heat plume through the underground as it is injected in one well and pumped to another one. The thermal tracer evolution is followed by gathering electrical resistivity (ERT) images in a time-lapse framework over 10 days. In this contribution, we examine the potential of ERT to image such thermal plume and its

  6. Long-term monitoring of the TeV emission from Mrk 421 with the ARGO-YBJ experiment

    CERN Document Server

    Bartoli, B; Bi, X J; Bleve, C; Bolognino, I; Branchini, P; Budano, A; Melcarne, A K Calabrese; Camarri, P; Cao, Z; Cappa, A; Cardarelli, R; Catalanotti, S; Cattaneo, C; Celio, P; Chen, S Z; Chen, T L; Chen, Y; Creti, P; Cui, S W; Dai, B Z; Staiti, G D'Alí; Danzengluobu,; Dattoli, M; De Mitri, I; Piazzoli, B D'Ettorre; Di Girolamo, T; Ding, X H; Di Sciascio, G; Feng, C F; Feng, Zhaoyang; Feng, Zhenyong; Galeazzi, F; Galeotti, P; Giroletti, E; Gou, Q B; Guo, Y Q; He, H H; Hu, Haibing; Hu, Hongbo; Huang, Q; Iacovacci, M; Iuppa, R; James, I; Jia, H Y; Labaciren,; Li, H J; Li, J Y; Li, X X; Liguori, G; Liu, C; Liu, C Q; Liu, J; Liu, M Y; Lu, H; Ma, X H; Mancarella, G; Mari, S M; Marsella, G; Martello, D; Mastroianni, S; Montini, P; Ning, C C; Pagliaro, A; Panareo, M; Panico, B; Perrone, L; Pistilli, P; Qu, X B; Rossi, E; Ruggieri, F; Salvini, P; Santonico, R; Shen, P R; Sheng, X D; Shi, F; Stanescu, C; Surdo, A; Tan, Y H; Vallania, P; Vernetto, S; Vigorito, C; Wang, B; Wang, H; Wu, C Y; Wu, H R; Xu, B; Xue, L; Yan, Y X; Yang, Q Y; Yang, X C; Yao, Z G; Yuan, A F; Zha, M; Zhang, H M; Zhang, Jilong; Zhang, Jianli; Zhang, L; Zhang, P; Zhang, X Y; Zhang, Y; Zhaxiciren,; Zhaxisangzhu,; Zhou, X X; Zhu, F R; Zhu, Q Q; Zizzi, G

    2011-01-01

    ARGO-YBJ is an air shower detector array with a fully covered layer of resistive plate chambers. It is operated with a high duty cycle and a large field of view. It continuously monitors the northern sky at energies above 0.3 TeV. In this paper, we report a long-term monitoring of Mrk 421 over the period from 2007 November to 2010 February. This source was observed by the satellite-borne experiments Rossi X-ray Timing Explorer and Swift in the X-ray band. Mrk 421 was especially active in the first half of 2008. Many flares are observed in both X-ray and gamma-ray bands simultaneously. The gamma-ray flux observed by ARGO-YBJ has a clear correlation with the X-ray flux. No lag between the X-ray and gamma-ray photons longer than 1 day is found. The evolution of the spectral energy distribution is investigated by measuring spectral indices at four different flux levels. Hardening of the spectra is observed in both X-ray and gamma-ray bands. The gamma-ray flux increases quadratically with the simultaneously measur...

  7. UK experience in the monitoring and control of lead in drinking water.

    Science.gov (United States)

    Hayes, Colin R; Hydes, Owen D

    2012-09-01

    At the zonal scale (e.g. a city or town), random daytime (RDT) sampling succeeded in demonstrating both the need for corrective action and the benefits of optimised orthophosphate dosing for plumbosolvency control, despite initial concerns about sampling reproducibility. Stagnation sampling techniques were found to be less successful. Optimised treatment measures to minimise lead in drinking water, comprising orthophosphate at an optimum dose and at an appropriate pH, have succeeded in raising compliance with the future European Union (EU) lead standard of 10 μg/L from 80.4% in 1989-94 to 99.0% in 2010 across England and Wales, with compliance greater than 99.5% in some regions. There may be scope to achieve 99.8% compliance with 10 μg/L by further optimisation coupled to selective lead pipe removal, without widespread lead pipe removal. It is unlikely that optimised corrosion control, that includes the dosing of orthophosphate, will be capable of achieving a standard much lower than 10 μg/L for lead in drinking water. The experience gained in the UK provides an important reference for any other country or region that is considering its options for minimising lead in their drinking water supplies.

  8. Experiment, monitoring, and gradient methods used to infer climate change effects on plant communities yield consistent patterns.

    Science.gov (United States)

    Elmendorf, Sarah C; Henry, Gregory H R; Hollister, Robert D; Fosaa, Anna Maria; Gould, William A; Hermanutz, Luise; Hofgaard, Annika; Jónsdóttir, Ingibjörg S; Jónsdóttir, Ingibjörg I; Jorgenson, Janet C; Lévesque, Esther; Magnusson, Borgþór; Molau, Ulf; Myers-Smith, Isla H; Oberbauer, Steven F; Rixen, Christian; Tweedie, Craig E; Walker, Marilyn D; Walker, Marilyn

    2015-01-13

    Inference about future climate change impacts typically relies on one of three approaches: manipulative experiments, historical comparisons (broadly defined to include monitoring the response to ambient climate fluctuations using repeat sampling of plots, dendroecology, and paleoecology techniques), and space-for-time substitutions derived from sampling along environmental gradients. Potential limitations of all three approaches are recognized. Here we address the congruence among these three main approaches by comparing the degree to which tundra plant community composition changes (i) in response to in situ experimental warming, (ii) with interannual variability in summer temperature within sites, and (iii) over spatial gradients in summer temperature. We analyzed changes in plant community composition from repeat sampling (85 plant communities in 28 regions) and experimental warming studies (28 experiments in 14 regions) throughout arctic and alpine North America and Europe. Increases in the relative abundance of species with a warmer thermal niche were observed in response to warmer summer temperatures using all three methods; however, effect sizes were greater over broad-scale spatial gradients relative to either temporal variability in summer temperature within a site or summer temperature increases induced by experimental warming. The effect sizes for change over time within a site and with experimental warming were nearly identical. These results support the view that inferences based on space-for-time substitution overestimate the magnitude of responses to contemporary climate warming, because spatial gradients reflect long-term processes. In contrast, in situ experimental warming and monitoring approaches yield consistent estimates of the magnitude of response of plant communities to climate warming.

  9. Monitoring water content in Opalinus Clay within the FE-Experiment: Test application of dielectric water content sensors

    Science.gov (United States)

    Sakaki, T.; Vogt, T.; Komatsu, M.; Müller, H. R.

    2013-12-01

    The spatiotemporal variation of water content in the near field rock around repository tunnels for radioactive waste in clay formations is one of the essential quantities to be monitored for safety assessment in many waste disposal programs. Reliable measurements of water content are important not only for the understanding and prediction of coupled hydraulic-mechanic processes that occur during tunnel construction and ventilation phase, but also for the understanding of coupled thermal-hydraulic-mechanical (THM) processes that take place in the host rock during the post closure phase of a repository tunnel for spent fuel and high level radioactive waste (SF/HLW). The host rock of the Swiss disposal concept for SF/HLW is the Opalinus Clay formation (age of approx. 175 Million years). To better understand the THM effects in a full-scale heater-engineered barrier-rock system in Opalinus Clay, a full-scale heater test, namely the Full-Scale Emplacement (FE) experiment, was initiated in 2010 at the Mont Terri underground rock laboratory in north-western Switzerland. The experiment is designed to simulate the THM evolution of a SF/HLW repository tunnel based on the Swiss disposal concept in a realistic manner during the construction, emplacement, backfilling, and post-closure phases. The entire experiment implementation (in a 50 m long gallery with approx. 3 m diameter) as well as the post-closure THM evolution will be monitored using a network of several hundred sensors. The sensors will be distributed in the host rock, the tunnel lining, the engineered barrier, which consists of bentonite pellets and blocks, and on the heaters. The excavation is completed and the tunnel is currently being ventilated. Measuring water content in partially saturated clay-rich high-salinity rock with a deformable grain skeleton is challenging. Therefore, we use the ventilation phase (before backfilling and heating) to examine the applicability of commercial water content sensors and to

  10. Soft X-ray irradiance measured by the Solar Aspect Monitor on the Solar Dynamic Observatory Extreme ultraviolet Variability Experiment

    CERN Document Server

    Lin, C Y; Jones, A; Woodraska, D; Caspi, A; Woods, T N; Eparvier, F G; Wieman, S R; Didkovsky, L V

    2016-01-01

    The Solar Aspect Monitor (SAM) is a pinhole camera on the Extreme-ultraviolet Variability Experiment (EVE) aboard the Solar Dynamics Observatory (SDO). SAM projects the solar disk onto the CCD through a metallic filter designed to allow only solar photons shortward of 7 nm to pass. Contamination from energetic particles and out-of-band irradiance is, however, significant in the SAM observations. We present a technique for isolating the 0.01--7 nm integrated irradiance from the SAM signal to produce the first results of broadband irradiance for the time period from May 2010 to May 2014. The results of this analysis agree with a similar data product from EVE's EUV SpectroPhotometer (ESP) to within 25%. We compare our results with measurements from the Student Nitric Oxide Explorer (SNOE) Solar X-ray Photometer (SXP) and the Thermosphere Ionosphere Mesosphere Energetics and Dynamics (TIMED) Solar EUV Experiment (SEE) at similar levels of solar activity. We show that the full-disk SAM broadband results compare we...

  11. Monitoring of tritium purity during long-term circulation in the KATRIN test experiment LOOPINO using laser Raman spectroscopy

    CERN Document Server

    Fischer, Sebastian; Schlösser, Magnus; Bornschein, Beate; Drexlin, Guido; Priester, Florian; Lewis, Richard J; Telle, Helmut H

    2012-01-01

    The gas circulation loop LOOPINO has been set up and commissioned at Tritium Laboratory Karlsruhe (TLK) to perform Raman measurements of circulating tritium mixtures under conditions similar to the inner loop system of the neutrino-mass experiment KATRIN, which is currently under construction. A custom-made interface is used to connect the tritium containing measurement cell, located inside a glove box, with the Raman setup standing on the outside. A tritium sample (purity > 95%, 20 kPa total pressure) was circulated in LOOPINO for more than three weeks with a total throughput of 770 g of tritium. Compositional changes in the sample and the formation of tritiated and deuterated methanes CT_(4-n)X_n (X=H,D; n=0,1) were observed. Both effects are caused by hydrogen isotope exchange reactions and gas-wall interactions, due to tritium {\\beta} decay. A precision of 0.1% was achieved for the monitoring of the T_2 Q_1-branch, which fulfills the requirements for the KATRIN experiment and demonstrates the feasibility ...

  12. Monitoring soil water dynamics at 0.1-1000 m scales using active DTS: the MOISST experience

    Science.gov (United States)

    Sayde, C.; Moreno, D.; Legrand, C.; Dong, J.; Steele-Dunne, S. C.; Ochsner, T. E.; Selker, J. S.

    2014-12-01

    The Actively Heated Fiber Optics (AHFO) method can measure soil water content at high temporal (39,000 locations simultaneously for each heat pulse. Six soil monitoring stations along the fiber optic path were installed to provide additional validation and calibration of the AHFO data. Gravimetric soil moisture and soil thermal samplings were performed periodically to provide additional distributed validation and calibration of the DTS data. In this work we present the preliminary results of this experiment. We will also address the experience learned from this large scale deployment of the AHFO method. In particular, we will present the in-situ soil moisture calibration method developed to tackle the calibration challenges associated with the high spatial heterogeneity of the soil physical and thermal properties. The material is based upon work supported by NASA under award NNX12AP58G, with equipment and assistance also provided by CTEMPs.org with support from the National Science Foundation under Grant Number 1129003. Any opinions, findings, and conclusions or recommendations expressed in this material are those of the authors and do not necessarily reflect the views of NASA or the National Science Foundation. Sayde, C., J. Benitez Buelga, L. Rodriguez-Sinobas, L. El Khoury, M. English, N. van de Giesen, and J.S. Selker (2014). Mapping Variability of Soil Water Content and Flux across 1-1,000 m scales using the Actively Heated Fiber Optic Method, Accepted for publication in Water Resour. Res.

  13. EXPERIENCE OF RADIATION-HYGIENIC MONITORING MANAGEMENT AND ASSESSMENT OF RADIATION SITUATION IN THE BRYANSK REGION TERRITORY AFTER 25 YEARS SINCE THE DAY OF THE CHERNOBYL ACCIDENT

    Directory of Open Access Journals (Sweden)

    L. N. Trapeznikova

    2011-01-01

    Full Text Available The article briefly presents the experience of the radiation-hygienic monitoring system creation in the territory contaminated with the radionuclides due to the Chernobyl accident and application of the radiation hygienic monitoring data for the assessment of protective measures efficiency. Radiation situation data for the territory of the Bryansk region after 25 years of Chernobyl accident and dynamics of the population average annual effective exposure dose are being presented.

  14. Significance of the Easy-to-use Water Quality Checker for Participative Environmental Monitoring and Experience Based Learning

    Directory of Open Access Journals (Sweden)

    Akira Kikuchi

    2010-10-01

    Full Text Available Pack Test is a series of products of Kyoritsu Chemical-Check Laboratory Cooperation, Japan. It is easy-to-use, anybody can use at anywhere, low cost, nontoxic, safe, and professional-use, onetime use ion-selective color metric water quality checker. The aim of this research is to assess, then next, discuss the significance of applications of this tool. In this order, NH4-Pack Test was selected as an example for the discussions; although there are more than 60 parameters can be detected by pack test such as, COD, Cl-, NO3-, phosphate, hardness, pH, heavy metals, etc.. As for field survey, Ion chromatography was used to measure ammonium concentration of river water in Jakarta. Then detection range of the NH4-Pack Test was compared to the data, and Indonesian and Malaysian national water quality standard. River water quality of Jakarta was weekly degraded at upstream area, but it was seriously degraded at downstream area (up to 5-10 NH4-N mg/L. As for ammonium concentration, obviously the detection range and step of Pack Test was sufficient to assess the ammonium concentrations of rive water in Jakarta. Of course Pack Test is very simplified tool, environmental water quality standard of ammonia for class I in Indonesia and Class I and II in Malaysia were difficult to evaluate. However, it was obviously applicable to check treated effluent and Class III to V water quality of Malaysian environmental standard. Consequently, it is suggested to adopt a double standard policy of water quality monitoring, such as combination of “easy-to-use simplified” and “conventional-accurate”. Because of low cost, and professional-convenient design, implementation of Pack Test will significant to empower on-site water quality monitoring in developing country, participative environmental awareness public programs, experience base environmental learning in schools, and other grass-rooted environmental activities.

  15. Probabilistic inversion of electrical resistivity data from bench-scale experiments: On model parameterization for CO2 sequestration monitoring

    Science.gov (United States)

    Breen, S. J.; Lochbuehler, T.; Detwiler, R. L.; Linde, N.

    2013-12-01

    Electrical resistivity tomography (ERT) is a well-established method for geophysical characterization and has shown potential for monitoring geologic CO2 sequestration, due to its sensitivity to electrical resistivity contrasts generated by liquid/gas saturation variability. In contrast to deterministic ERT inversion approaches, probabilistic inversion provides not only a single saturation model but a full posterior probability density function for each model parameter. Furthermore, the uncertainty inherent in the underlying petrophysics (e.g., Archie's Law) can be incorporated in a straightforward manner. In this study, the data are from bench-scale ERT experiments conducted during gas injection into a quasi-2D (1 cm thick), translucent, brine-saturated sand chamber with a packing that mimics a simple anticlinal geological reservoir. We estimate saturation fields by Markov chain Monte Carlo sampling with the MT-DREAM(ZS) algorithm and compare them quantitatively to independent saturation measurements from a light transmission technique, as well as results from deterministic inversions. Different model parameterizations are evaluated in terms of the recovered saturation fields and petrophysical parameters. The saturation field is parameterized (1) in cartesian coordinates, (2) by means of its discrete cosine transform coefficients, and (3) by fixed saturation values and gradients in structural elements defined by a gaussian bell of arbitrary shape and location. Synthetic tests reveal that a priori knowledge about the expected geologic structures (as in parameterization (3)) markedly improves the parameter estimates. The number of degrees of freedom thus strongly affects the inversion results. In an additional step, we explore the effects of assuming that the total volume of injected gas is known a priori and that no gas has migrated away from the monitored region.

  16. Fiberoptic intraparenchymal brain pressure monitoring with the Camino V420 monitor: reflections on our experience in 163 severely head-injured patients.

    Science.gov (United States)

    Poca, Maria-Antonia; Sahuquillo, Juan; Arribas, Mercedes; Báguena, Marcelino; Amorós, Sonia; Rubio, Enrique

    2002-04-01

    To assess the safety and accuracy of the Camino intraparenchymal sensor, we prospectively evaluated hemorrhagic complications, zero-drift, infection, and system malfunction in 163 patients monitored after a severe head injury. Mean duration of intracranial pressure (ICP) monitoring was 5 +/- 2.2 days (range: 12 h to 11 days). Of the 141 patients with a control CT scan, four showed a 1-2-cc collection of blood at the catheter's end. When removed, the sensors underread the true ICP value (negative zero-drift) in 80 of the 126 sensors evaluated (63.5%). Fourteen sensors showed no zero-drift, and 32 sensors overread the true ICP value (positive zero-drift) (median: -1 mm Hg; interquartile range: -4 to +1 mm Hg). No significant relationship was found between zero-drift, the surgeon who implanted the sensor, intracranial hypertension, or duration of ICP monitoring. No clinical infections could be attributed to the devices. Sixteen patients (9.8%) required more than one ICP sensor due to malfunctioning of the system. In conclusion, continuous ICP monitoring using the Camino intraparenchymal sensor has a low complication rate. However, this sensor may underread the real ICP values in a high number of patients. The lack of correlation between duration of ICP monitoring and zero-drift suggests that, contrary to the recommendations of other reports, the intraparenchymatous Camino sensor can provide reliable readings after the fifth day of use.

  17. Structure and photocatalytic properties of Nb-doped Bi{sub 12}TiO{sub 20} prepared by the oxidant peroxide method (OPM)

    Energy Technology Data Exchange (ETDEWEB)

    Nogueira, André E., E-mail: andreesteves86@hotmail.com; Lima, Alan R. F., E-mail: alan_rogerio2000@yahoo.com.br [UFSCar-Universidade Federal de São Carlos, LIEC-Laboratório Interdisciplinar de Eletroquímica e Cerâmica, Departamento de Química (Brazil); Longo, Elson, E-mail: elson@iq.unesp.br [UNESP-Universidade Estadual Paulista, Instituto de Química de Araraquara (Brazil); Leite, Edson R., E-mail: edson.leite@pq.cnpq.br; Camargo, Emerson R., E-mail: camargo@ufscar.br [UFSCar-Universidade Federal de São Carlos, LIEC-Laboratório Interdisciplinar de Eletroquímica e Cerâmica, Departamento de Química (Brazil)

    2014-12-15

    Pure (Bi{sub 12}TiO{sub 20}) and niobium-doped (Bi{sub 12}Ti{sub 1−x}Nb{sub x}O{sub 20}, with “x” up to 0.15) bismuth titanates were prepared by the oxidant peroxide method (OPM) and used to photodegradate rhodamine b (RhB) under UV and visible radiation. Rietveld refinements showed samples consisting mainly of sillenite structure with small amounts of a perovskite secondary phase in the Nb-doped materials. These bismuth-based catalysts exhibited superior performance than the commercial TiO{sub 2}, with band gaps ranging from 2.53 of pure Bi{sub 12}TiO{sub 20} to 2.73 eV depending on the amount of niobium added, which seems to be responsible for the improved photoactivity of the doped catalysts under UV radiation.

  18. Hamamatsu PMT R7056 Study for the Extinction Monitoring System of the Mu2e Experiment at Fermilab

    CERN Document Server

    Boi, S; Hedin, D; Johnson, E; Prebys, E; Rubinov, P

    2015-01-01

    The Mu2e experiment at Fermilab proposes to search for the coherent neutrino-less conversion of muons to electrons in the presence of a nucleus. The experimental signature for an aluminum target is an isolated 105 MeV electron exiting the stopping target no earlier than ~700 ns after the pulse of proton beam hits the production target. Any protons that hit the production target in between the pulses can lead to fake conversion electrons during the measurement period. We define the beam extinction as the ratio of the number of protons striking the production target between pulses to the number striking the target during the pulses. It has been established that an extinction of approximately 10-10 is required to reduce the backgrounds to an acceptable level. It would be desirable to measure the extinction of the beam coming out of the accelerator in a minute or less. Studies for the fast extinction monitor based on Hamamatsu PMT R7056 is the subject of this presentation.

  19. Impact of using different ozone cross sections on ozone profile retrievals from Global Ozone Monitoring Experiment (GOME ultraviolet measurements

    Directory of Open Access Journals (Sweden)

    X. Liu

    2007-07-01

    Full Text Available We investigate the effect of using three different cross section data sets on ozone profile retrievals from Global Ozone Monitoring Experiment (GOME ultraviolet measurements (289–307 nm, 326–337 nm. These include Bass-Paur, Brion, and GOME flight model cross sections (references below. Using different cross sections can significantly affect the retrievals, by up to 12 Dobson Units (DU, 1 DU=2.69×1016 molecules cm−2 in total column ozone, up to 10 DU in tropospheric column ozone, and up to 100% in retrieved ozone values for individual atmospheric layers. Compared to using the Bass-Paur and GOME flight model cross sections, using the Brion cross sections not only reduces fitting residuals by 15–60% in the Huggins bands, but also improves retrievals, especially in the troposphere, as seen from validation against ozonesonde measurements. Therefore, we recommend using the Brion cross section for ozone profile retrievals from ultraviolet measurements. The total column ozone retrieved using the GOME flight model cross sections is systematically lower, by 7–10 DU, than that retrieved using the Brion and Bass-Paur cross sections and is also systematically lower than Total Ozone Mapping Spectrometer (TOMS observations. This study demonstrates the need for improved ozone cross section measurements in the ultraviolet to improve profile retrievals of this key atmospheric constituent.

  20. CO2-water-mineral reactions during CO2 leakage into glauconitic sands: geochemical and isotopic monitoring of batch experiments

    Science.gov (United States)

    Humez, P.; Lions, J.; Lagneau, V.; Negrel, Ph.

    2012-04-01

    The assessment of environmental impacts of carbon dioxide geological storage requires the investigation of the potential CO2 leakages into fresh groundwater reserves. The Albian aquifer of the Paris Basin was chosen as a case of study because i) the Paris Basin contains deep saline Jurassic and Triassic aquifers identified as targets by the French national program of CO2 geological storage and ii) the Albian aquifer is a deep freshwater resource of strategic national importance, above the Jurassic and Triassic formations. An experimental and a geochemical modelling approach were carried out in order to better understand the rock-water-CO2 interactions with two main objectives: to assess the evolution of the chemistry of the formation water and of the mineralogy of the solid phase during the interaction and to design a monitoring program for freshwater resources. The main focus is to select and develop suitable indirect indicators of the presence of CO2 in the aquifer. We present here the experimental results, which combines both major and trace elements and isotopic tools, some of them new in the CCS field. Batch reactors with a liquid/solid ratio of 10 made of appropriate materials (PTFE, stainless steel) were equipped with simultaneous controls on several parameters (pH measurement, gas phase composition, pressure, tightness…) after CO2 injection (PCO2= 2 bar; room temperature). Ten reactors were run simultaneously, over pre-determined durations of CO2-water-rock interaction (1, 7, 15 and 30 days). During the batch experiment, we observed major changes in several chemical parameters due to the CO2 injection. A sharp drop in pH from 6.6 to 4.9 was noticeable, immediately after the injection, due to CO2 dissolution in the water phase. Alkalinity varies from 1.3 mmol.L-1 in the initial water to 2.0 mmol.L-1 at the end of the 1-month experiment. Four types of ion behaviors are observed: (1) calcium, silicon and magnesium concentrations increase during the 1-month

  1. The construction of the Fiber-SiPM beam monitor system of the R484 and R582 experiments at the RIKEN-RAL muon facility

    Science.gov (United States)

    Bonesini, M.; Bertoni, R.; Chignoli, F.; Mazza, R.; Cervi, T.; de Bari, A.; Menegolli, A.; Prata, M. C.; Rossella, M.; Tortora, L.; Carbone, R.; Mocchiutti, E.; Vacchi, A.; Vallazza, E.; Zampa, G.

    2017-03-01

    The scintillating fiber-SiPM beam monitor detectors, designed to deliver beam informations for the R484 and R582 experiments at the high intensity, low energy pulsed muon beam at the RIKEN-RAL facility, have been successfully constructed and operated. Details on their construction and first performances in beam are reported.

  2. Student and staff experiences of attendance monitoring in undergraduate obstetrics and gynecology: a cross-sectional survey

    National Research Council Canada - National Science Library

    Deane, Richard P; Murphy, Deirdre J

    2016-01-01

    Despite the widespread introduction of active learning strategies to engage students across modern medical curricula, student attendance and attendance monitoring remain a challenging issue for medical educators...

  3. Studies of the Machine Induced Background, simulations for the design of the Beam Condition Monitor and implementation of the Inclusive $\\phi$ Trigger at the LHCb experiment at CERN

    CERN Document Server

    Lieng, Magnus

    2011-01-01

    LHCb is one of the four major experiments of the LHC at CERN, built to perform precision measurements of CP violation and rare decays. In order to protect the sensitive elements of the experiment from adverse beam conditions the Beam Condition Monitor has been created. Such conditions increase the particle flux arriving from the LHC, known as Machine Induced Background. These particles interfere with the experiment, for example through the physics trigger. In this thesis software development and simulations for the design and validation of the Beam Condition Monitor is shown, ranging from LHCb-specific algorithm implementation to beam dump threshold determination. Furthermore, software development in order to attain a complete simulation chain of machine induced background is shown. The results of these simulations are compared to early data collected at LHCb. Lastly, the development and implementation of the Inclusive $\\phi$ trigger line for the High Level Trigger is presented. This line aims to reconstruct ...

  4. The use of algae in monitoring discharges of radionuclides. Experiences from the 1992 and 1993 monitoring programmes at the Swedish nuclear power plants

    Energy Technology Data Exchange (ETDEWEB)

    Snoeijs, P. [Uppsala Univ. (Sweden). Dept. of Ecological Botany; Simenstad, P. [Swedish Radiation Protection Inst., Stockholm (Sweden)

    1995-01-01

    All four Swedish nuclear power plants (Forsmark, Oskarshamn, Barsebaeck and Ringhals) use brackish water as coolant (Baltic Sea and Swedish west coast). Radionuclides are discharged together with the cooling water. The gamma spectra of monthly algal samples harvested in 1992 and 1993 close to the discharge points of these power plants were determined within the routine monitoring programmes. The main radionuclides detected in the algal samples were {sup 54}Mn, {sup 58}Co, {sup 60}Co and {sup 137}Cs. Most {sup 137}Cs in the samples from the northern Baltic Sea (Forsmark) still originated from the 1986 Chernobyl accident. Other radionuclides, notably {sup 51}Cr, {sup 65}Zn, {sup 95}Zr, {sup 95}Nb, {sup 110m}Ag, {sup 124}b, {sup 125}Sb and {sup 134}Cs, were regularly detected at s of the sites. Transfer factors from discharge to algae were generally in the order of 0.3-3 Bq kg{sup -1} per MBq discharge. For the major discharged radionuclides, significant linear relationships were in most cases found between discharges and concentrations in algal samples. Differences in transfer factors and regression coefficients were explained by location of the sampling sites and type of radionuclide. It is concluded that algal samples provide useful complements to water and sediment samples in the monitoring programmes since radionuclide concentrations are much higher in algal samples and proportional to the discharges. 21 refs, figs.

  5. French experience in transient data collection and fatigue monitoring of PWR`s nuclear steam supply system; Experience francaise sur la comptabilisation des transitoires et la surveillance en fatigue des chaudieres REP

    Energy Technology Data Exchange (ETDEWEB)

    Sabaton, M.; Morilhat, P.; Savoldelli, D.; Genette, P.

    1995-10-01

    Electricite de France (EDF), the french national electricity company, is operating 54 standardized pressurizer water reactors. This about 500 reactor-years experience in nuclear stations operation and maintenance area has allowed EDF to develop its own strategy for monitoring of age-related degradations of NPP systems and components relevant for plant safety and reliability. After more than fifteen years of experience in regulatory transient data collection and seven years of successful fatigue monitoring prototypes experimentation, EDF decided to design a new system called SYSFAC (acronym for SYsteme de Surveillance en FAtigue de la Chaudiere) devoted to transient logging and thermal fatigue monitoring of the reactor coolant pressure boundary. The system is fully automatic and directly connected to the on-site data acquisition network without any complementary instrumentation. A functional transient detection module and a mechanical transient detection module are in charge of the general transient data collection. A fatigue monitoring module is aimed towards a precise surveillance of five specific zones particularly sensible to thermal fatigue. After the first step of preliminary studies, the industrial phase of the SYSFAC project is currently going on, with hardware and software tests and implementation. The first SYSFAC system will be delivered to the pilot power plant by the beginning of 1996. The extension to all EDF`s nuclear 900 MW is planned after one more year of feedback experience. (authors). 12 refs., 3 figs.

  6. MICROBIOLOGICAL MONITORING PLAN OF VENUS GALLINA PRODUCTION ZONES: THE EXPERIENCE OF Z.T. 11 OF FERMO IN THE PERIOD 2009/2010

    Directory of Open Access Journals (Sweden)

    S. Fichera

    2011-08-01

    Full Text Available Shellfish may pose a risk in food safety, which is why the monitoring of the waters must be classified before the collection of live bivalve molluscs. These animals are filter feeders that accumulate microorganisms and chemicals present in water. Regulation (EC 854/04 provides that Member States ensure the classification of production areas of bivalve molluscs and establish a surveillance system on the areas of classification and the production facilities that allows continuous monitoring of the healthiness of these products and health quality of water. This paper reports the results of the microbiological production areas of Venus gallina pertaining to the Z.T. 11 Fermo for the years 2009-2010. From our experience, it is the important to have an adequate monitoring regional system and the involvement of professionals in this sector for an effective prevention. So it is of great importance to involve all the different workers in this field.

  7. Linking monitoring and modelling for river basin management:Danish experience with combating nutrient loadings to the aquatic environment from point and non-point sources

    Institute of Scientific and Technical Information of China (English)

    KRONVANG; Brian; WINDOLF; JФrgen; GRANT; Ruth; ANDERSEN; Hans; E; THODSEN; Hans; OVESEN; Niels; B; LARSEN; SФren; E

    2009-01-01

    Nationwide monitoring of the aquatic environment was initiated in 1988 in Denmark as a means to follow the outcome of the Action Plans for nutrient pollution of the aquatic environment. Five Action Plans have been adopted by the Danish Parliament since 1985 and the nationwide monitoring programme can be used to quantify the outcome as shown by reductions in nutrient discharges from both point and non-point sources. Moreover, the empirical experience gathered from nearly 20 years of monitoring is assisting the development and calibration of models for simulation of nitrogen leaching, nitrogen removal in groundwater and surface waters and the establishment of a P-index all covering the entire land area of Denmark.

  8. Linking monitoring and modelling for river basin man-agement: Danish experience with combating nutrient loadings to the aquatic environment from point and non-point sources

    Institute of Scientific and Technical Information of China (English)

    KRONVANG Brian; WINDOLF J(φ)rgen; GRANT Ruth; ANDERSEN Hans E; THODSEN Hans; OVESEN Niels B; LARSEN S(φ)ren E

    2009-01-01

    Nationwide monitoring of the aquatic environment was initiated in 1988 in Denmark as a means to fol-low the outcome of the Action Plans for nutrient pollution of the aquatic environment.Five Action Plans have been adopted by the Danish Parliament since 1985 and the nationwide monitoring programme can be used to quantify the outcome as shown by reductions in nutrient discharges from both point and non-point sources.Moreover, the empirical experience gathered from nearly 20 years of monitoring is assisting the development and calibration of models for simulation of nitrogen leaching, nitrogen re-moval in groundwater and surface waters and the establishment of a P-index all covering the entire land area of Denmark.

  9. Development of a unit suitable for corrosion monitoring in district heating systems. Experiences with the LOCOR-cell test method

    DEFF Research Database (Denmark)

    Andersen, Asbjørn; Hilbert, Lisbeth Rischel

    2004-01-01

    the purpose, background and gained results of one of the used monitoring techniques, the crevice corrosion measurements obtained by the LOCOR-Cell„§. The crevice corrosion cell was developed by FORCE Technology in a previous district heating project financed by Nordic Industrial Fund (1)(2). Results from...... in 6 pressurised circulating heating systems and in one cooling system. 7 different corrosion monitoring methods have been used to study corrosion rates and types in dependency of water chemistry. This paper describes the design of the by-pass unit including water analysis methods. It also describes...... other used corrosion monitoring methods in the project are described elsewhere (3) and (4). For future district heating corrosion monitoring the by-pass unit can be recommended for permanent installation and the two methods high sensitive ER-technique (Metricorr) and the LOCOR-Cell„§ (FORCE Technology...

  10. Development of a unit suitable for corrosion monitoring in district heating systems. Experiences with the LOCOR-cell test method

    DEFF Research Database (Denmark)

    Andersen, Asbjørn; Hilbert, Lisbeth Rischel

    2004-01-01

    the purpose, background and gained results of one of the used monitoring techniques, the crevice corrosion measurements obtained by the LOCOR-Cell„§. The crevice corrosion cell was developed by FORCE Technology in a previous district heating project financed by Nordic Industrial Fund (1)(2). Results from...... in 6 pressurised circulating heating systems and in one cooling system. 7 different corrosion monitoring methods have been used to study corrosion rates and types in dependency of water chemistry. This paper describes the design of the by-pass unit including water analysis methods. It also describes...... other used corrosion monitoring methods in the project are described elsewhere (3) and (4). For future district heating corrosion monitoring the by-pass unit can be recommended for permanent installation and the two methods high sensitive ER-technique (Metricorr) and the LOCOR-Cell„§ (FORCE Technology...

  11. Real-time monitoring of genetically modified Chlamydomonas reinhardtii during the Foton M3 space mission and ground irradiation experiment

    Science.gov (United States)

    Lambreva, Maya; Rea, Giuseppina; Antonacci, Amina; Serafini, Agnese; Damasso, Mario; Margonelli, Andrea; Johanningmeier, Udo; Bertalan, Ivo; Pezzotti, Gianni; Giardi, Maria Teresa

    Long-term space exploration, colonization or habitation requires biological life support systems capable to cope with the deleterious space environment. The use of oxygenic photosynthetic microrganisms is an intriguing possibility mainly for food, O2 and nutraceutical compounds production. The critical points of utilizing plantsor algae-based life support systems are the microgravity and the ionizing radiation, which can influence the performance of these organisms. The aim of the present study was to assess the effects of space environment on the photosynthetic activity of various microrganisms and to select space stress-tolerant strains. Site-directed and random mutants of the unicellular green alga Chlamydomonas reinhardtii of Photosystem II D1 protein were used as a model system to test and select the amino acid substitutions capable to account for space stress tolerance. We focussed our studies also on the accumulation of the Photosystem II photoprotective carotenoids (the xantophylls violaxanthin, anteraxanthin and zeaxanthin), powerful antioxidants that epidemiological studies demonstrated to be human vision protectors. Metabolite profiling by quantitative HPLC methods revealed the organisms and the stress conditions capable to accumulate the highest pigment levels. In order to develop a project for a rationale metabolic engineering of algal secondary metabolites overproduction, we are performing expression analyses on the carotenoid biosynthetic pathway under physiological and mimicked space conditions. To identify the consequences of the space environment on the photosynthetic apparatus the changes in the Photosystem II efficiency were monitored in real time during the ESA-Russian Foton-M3 mission in September 2007. For the space flight a high-tech, multicell fluorescence biosensor, Photo-II, was designed and built by the Centre for Advanced Research in Space Optics in collaboration with Kayser-Italy, Biosensor and DAS. Photo-II is an automatic device

  12. Feasibility experiment for Active Monitoring of Inter-plate Coupling in Tokai region. ---A dense array measurement---

    Science.gov (United States)

    Watanabe, T.; Ikuta, R.; Soma, T.; Saiga, A.; Miyajima, R.; Fujii, N.; Yamaoka, K.; Tsuruga, K.; Kunitomo, T.; Hasada, Y.; Kasahara, J.; Kumazawa, M.; Satomura, M.

    2005-12-01

    We carried out a long-distance seismic monitoring experiment using ACROSS (Accurately Controlled and Routinely Operated Signal System) for 10 months starting from the end of 2004 in Tokai region central Japan. In this experiment, we attempted to detect reflected phases from the top surface of the subducting Philippine Sea plate and to detect their temporal changes. In the Tokai region, a seismic survey was conducted in 2001. A strong reflected phase was detected and was interpreted as a reflection from the boundary between subducting and overriding plate [Iidaka, 2003]. Yoshida et al. [2004] analyzed the ACROSS signal received by a nationwide seismic network (Hi-net) and identified several phases which may include the direct waves and reflected phases from the plate boundary. The aim of our research is to confirm the reflected phases and also to detect temporal changes in properties of them. The ACROSS source was continuously operated in Toki City, Gifu prefecture by Tono Geoscience Center. The frequency-modulated signal with frequency band from10 to 20 Hz was precisely repeated with an interval of 50 seconds. As the rotation direction of the source reverses once per hour, we can synthesize linear vibration in any direction. Seismometers were deployed on a survey line between 40 and 70 km distance to the southeast from the source. We also deployed an array consisted by 12 seismometers having 2km aperture at 55 km away from the source on the survey line. We acquired seismograms with the array and stacked to improve S/N ratio. In ACROSS data analysis, we can estimate the errors of the received signals quantitatively in the frequency domain. We stacked the received signals weighted by inverse of the estimated errors in order to reduce the effect of the incidental noises such as earthquakes. We converted the stacked spectral signals into a frequency response by dividing them by the source spectra. Through applying an inverse Fourier transform to the frequency response

  13. Five years use of Pulse Doppler RADAR-utechnology in debris-flows monitoring - experience at three test sites so far

    Science.gov (United States)

    Koschuch, Richard; Brauner, Michael; Hu, Kaiheng; Hübl, Johannes

    2016-04-01

    Automatic monitoring of alpine mass movement is a major challenge in dealing with natural hazards. The presented research project shows a new approach in measurment and alarming technology for water level changes an debris flow by using a high-frequency Pulse Doppler RADAR. The detection system was implemented on 3 places (2 in Tirol/Austria within the monitoring systems of the IAN/BOKU; 1 in Dongchuan/China within the monitoring systems of the IMHE/Chinese Academy of Science) in order to prove the applicability of the RADAR in monitoring torrential activities (e.g. debris-flows, mudflows, flash floods, etc.). The main objective is to illustrate the principles and the potential of an innovative RADAR system and its versatility as an automatic detection system for fast (> 1 km/h - 300 km/h) alpine mass movements of any kind. The high frequency RADAR device was already successfully tested for snow avalanches in Sedrun/Switzerland (Lussi et al., 2012), in Ischgl/Austria (Kogelnig et al., 2012). The experience and the data of the five year showed the enormous potential of the presented RADAR technology in use as an independent warning and monitoring system in the field of natural hazard. We have been able to measure water level changes, surface velocities and several debris flows and can compare this data with the other installed systems.

  14. Design and experiments for the waveguide to coaxial cable adapter of a cavity beam position monitor%Design and experiments for the waveguide to coaxial cable adapter of a cavity beam position monitor

    Institute of Scientific and Technical Information of China (English)

    李享; 郑曙昕

    2011-01-01

    The waveguide to coaxial cable adapter is very important to the cavity beam position monitor (CBPM) because it determines how much of the energy in the cavity could be coupled outside. In this paper, the waveguide to coaxial cable adapter of a CBPM is des

  15. Optical signal monitoring in phase modulated optical fiber transmission systems

    Science.gov (United States)

    Zhao, Jian

    Optical performance monitoring (OPM) is one of the essential functions for future high speed optical networks. Among the parameters to be monitored, chromatic dispersion (CD) is especially important since it has a significant impact on overall system performance. In this thesis effective CD monitoring approaches for phase-shift keying (PSK) based optical transmission systems are investigated. A number of monitoring schemes based on radio frequency (RF) spectrum analysis and delay-tap sampling are proposed and their performance evaluated. A method for dispersion monitoring of differential phase-shift keying (DPSK) signals based on RF power detection is studied. The RF power spectrum is found to increase with the increase of CD and decrease with polarization mode dispersion (PMD). The spectral power density dependence on CD is studied theoretically and then verified through simulations and experiments. The monitoring sensitivity for nonreturn-to-zero differential phase-shift keying (NRZ-DPSK) and return-to-zero differential phase-shift keying (RZ-DPSK) based systems can reach 80ps/nm/dB and 34ps/nm/dB respectively. The scheme enables the monitoring of differential group delay (DGD) and CD simultaneously. The monitoring sensitivity of CD and DGD can reach 56.7ps/nm/dB and 3.1ps/dB using a bandpass filter. The effects of optical signal-to-noise ratio (OSNR), DGD, fiber nonlinearity and chirp on the monitoring results are investigated. Two RF pilot tones are employed for CD monitoring of DPSK signals. Specially selected pilot tone frequencies enable good monitoring sensitivity with minimum influence on the received signals. The dynamic range exceeding 35dB and monitoring sensitivity up to 9.5ps/nm/dB are achieved. Asynchronous sampling technique is employed for CD monitoring. A signed CD monitoring method for 10Gb/s NRZ-DPSK and RZ-DPSK systems using asynchronous delay-tap sampling technique is studied. The demodulated signals suffer asymmetric waveform distortion if

  16. Preliminary experience in the monitoring of geothermal probes by borehole logging; Erste Erfahrungen bei der bohrlochgeophysikalischen Ueberpruefung von Erdwaermesonden

    Energy Technology Data Exchange (ETDEWEB)

    Baumann, Karsten [Bohrlochmessung-Storkow GmbH, Storkow (Germany)

    2010-05-15

    Authorities as well as waterworks experts have long been calling for a control strategy to ensure that groundwater protection is considered in geothermal projects. So far, control options for geothermal probes were lacking, which raised doubts about the efficiency of sealing. Waterworks experts also were unable to understand why new groundwater wells or groundwater measuring fonts are subject to careful control via geophysical borehole logs while geothermal probes with a depth of 100 m and more can be installed nearby without adequate monitoring. The contribution presents a preliminary approach for monitoring and testing of shallow geothermal probes. (orig.)

  17. Análise da aplicação e dos resultados do modelo OPM3® para a área da saúde

    Science.gov (United States)

    Augusto dos Santos, Luis; de Fátima Marin, Heimar

    2015-01-01

    Esta pesquisa procurou analisar se um modelo de questionário criado por uma comunidade internacional de gerenciamento de projetos e se é aplicavél a organizações voltadas a área de saúde. O modelo OPM3® (Organizational Project Management Maturity Model) foi criado para que organizações de qualquer área ou porte pudessem identificar a presença, ou ausência, de boas práticas de gerenciamento. O objetivo da aplicação desse modelo é avaliar sempre a organização e não o entrevistado. No presente artigo, são apresentados os resultados da aplicação desse modelo em uma organização que possuía produtos e serviços de tecnologia da informação aplicados à área de saúde. Este estudo verificou que o modelo é aplicável de forma rápida e que a organização analisada possuía um número expressivo de boas práticas. PMID:26924862

  18. Young people at risk of psychosis: their subjective experiences of monitoring and cognitive behaviour therapy in the early detection and intervention evaluation 2 trial.

    Science.gov (United States)

    Byrne, Rory E; Morrison, Anthony P

    2014-09-01

    To explore participants' experiences of 'enhanced monitoring' and cognitive behaviour therapy (CBT) within a randomized controlled trial evaluating early detection and prevention of psychosis ('early detection and intervention evaluation [EDIE] 2'). Semi-structured qualitative interviews were conducted with a sample of participants at the end of their involvement with the trial. Ten young people were interviewed; six males and four females, with a mean age of 27.5. Nine participants identified themselves as White British and one Black British. All participants had received 'enhanced monitoring' during the trial, and 8 of 10 also received CBT. Interviews were transcribed verbatim and analysed using thematic analysis to identify central themes within and among participants' accounts. Three super-ordinate thematic areas were identified: 'a chance to talk', monitoring-specific themes, and CBT-specific themes. The central theme ('a chance to talk') was drawn from across all participants' accounts and represents the most consistently valued attribute of participants' experiences of the EDIE 2 trial. Sub-themes of this topic were identified as follows: interpersonal engagement, informality and normalization, and 'opening up'. Sub-themes related to monitoring include the following: clarity and reassurance, 'a therapeutic process', and challenges. CBT experience was most consistently conceptualized as 'rethinking things', and two additional CBT-specific sub-themes were identified: hard work and moving forward. Our findings suggest that for young people at risk of psychosis, a normalizing psychosocially oriented assessment and monitoring process may have benefits for many, while CBT may help to reduce the negative impact of unusual psychological experiences for both the short- and long term. Young people considered at risk of psychosis highly value normalizing, collaborative, and flexible approaches when engaging with research or clinical staff. All of our participants

  19. Thirty-year monitoring of subalpine meadow vegetation following a 1967 trampling experiment at Logan Pass, Glacier National Park, Montana

    Science.gov (United States)

    Ernest Hartley

    2000-01-01

    This long-term study, monitoring visitor impact on subalpine vegetation beginning in 1967, revealed that after 30 years all treatment plots had returned to pre-treatment ratios of vegetation (all species combined), organic litter and bare ground. Higher trampling intensities produced longer term impacts. Vegetation cover recovered in 19 to 25 years when trampled 15...

  20. Therapeutic drug monitoring of monoclonal antibodies in inflammatory and malignant disease: translating TNF-ɑ experience to oncology

    NARCIS (Netherlands)

    Oude Munnink, T.H.; Henstra, M.J.; Segerink, L.I.; Movig, K.L.L.; Brummelhuis-Visser, P.

    2016-01-01

    Lack of response to monoclonal antibodies (mAbs) has been associated with inadequate mAb serum concentrations. Therapeutic drug monitoring (TDM) of mAbs has the potential to guide to more effective dosing in individual patients. This review discusses the mechanisms responsible for interpatient varia

  1. Acoustic habitat and shellfish mapping and monitoring in shallow coastal water - Sidescan sonar experiences in The Netherlands

    NARCIS (Netherlands)

    Overmeeren, R. van; Craeymeersch, J.; Dalfsen, J. van; Fey, F.; Heteren, S. van; Meesters, E.

    2009-01-01

    Sidescan sonar has been applied in a number of shallow water environments along the Dutch coast to map and monitor shellfish and seabed habitats. The littoral setting of these surveys may hamper data acquisition flying the towfish in zones of turbulence and waves, but also offers valuable opportunit

  2. Improved optical performance monitoring technique based on nonlinear optics for high-speed WDM Nyquist systems

    Science.gov (United States)

    Guesmi, Latifa; Menif, Mourad

    2016-04-01

    The field of fiber optics nonlinearity is more discussed last years due to such remarkable enhancement in the nonlinear processes efficiency. In this paper, and for optical performance monitoring (OPM), a new achievement of nonlinear effects has been investigated. The use of cross-phase modulation (XPM) and four-wave mixing (FWM) effects between input optical signal and inserted continuous-wave probe has proposed for impairments monitoring. Indeed, transmitting a multi-channels phase modulated signal at high data rate (1 Tbps WDM Nyquist NRZ- DP-QPSK) improves the sensitivity and the dynamic range monitoring. It was observed by simulation results that various optical parameters including optical power, wavelength, chromatic dispersion (CD), polarization mode dispersion (PMD), optical signal-to-noise ratio (OSNR), Q-factor and so on, can be monitored. Also, the effect of increasing the channel spacing between WDM signals is studied and proved its use for FWM power monitoring.

  3. Intracranial pressure monitoring in pediatric and adult patients with hydrocephalus and tentative shunt failure: a single-center experience over 10 years in 146 patients.

    Science.gov (United States)

    Sæhle, Terje; Eide, Per Kristian

    2015-05-01

    OBJECT In patients with hydrocephalus and shunts, lasting symptoms such as headache and dizziness may be indicative of shunt failure, which may necessitate shunt revision. In cases of doubt, the authors monitor intracranial pressure (ICP) to determine the presence of over- or underdrainage of CSF to tailor management. In this study, the authors reviewed their experience of ICP monitoring in shunt failure. The aims of the study were to identify the complications and impact of ICP monitoring, as well as to determine the mean ICP and characteristics of the cardiac-induced ICP waves in pediatric versus adult over- and underdrainage. METHODS The study population included all pediatric and adult patients with hydrocephalus and shunts undergoing diagnostic ICP monitoring for tentative shunt failure during the 10-year period from 2002 to 2011. The patients were allocated into 3 groups depending on how they were managed following ICP monitoring: no drainage failure, overdrainage, or underdrainage. While patients with no drainage failure were managed conservatively without further actions, over- or underdrainage cases were managed with shunt revision or shunt valve adjustment. The ICP and ICP wave scores were determined from the continuous ICP waveforms. RESULTS The study population included 71 pediatric and 75 adult patients. There were no major complications related to ICP monitoring, but 1 patient was treated for a postoperative superficial wound infection and another experienced a minor bleed at the tip of the ICP sensor. Following ICP monitoring, shunt revision was performed in 74 (51%) of 146 patients, while valve adjustment was conducted in 17 (12%) and conservative measures without any actions in 55 (38%). Overdrainage was characterized by a higher percentage of episodes with negative mean ICP less than -5 to -10 mm Hg. The ICP wave scores, in particular the mean ICP wave amplitude (MWA), best differentiated underdrainage. Neither mean ICP nor MWA levels showed any

  4. KM and WEB 2.0 methods for project-based learning. MESHAT : a monitoring and experience sharing tool

    CERN Document Server

    Michel, Christine

    2011-01-01

    Our work aims at studying tools offered to learners and tutors involved in face-to-face or blended project-based learning activities. To understand better the needs and expectations of each actor, we are especially interested in the specific case of project management training. The results of a course observation show that the lack of monitoring and expertise transfer tools involves important dysfunctions in the course organisation and therefore dissatisfaction for tutors and students (in particular about the acquisition of knowledge and expertise). So as to solve this problem, we propose a personalised platform (according to the actor: project group, student or tutor), which gives information to monitor activities and supports the acquisition and transfer of expertise. This platform is based on Knowledge Management (KM) and Web 2.0 concepts to support the dynamic building of knowledge. KM is used to define the learning process (based on the experiential learning theory) and the way the individual knowledge b...

  5. Student and staff experiences of attendance monitoring in undergraduate obstetrics and gynecology: a cross-sectional survey

    OpenAIRE

    Deane RP; Murphy DJ

    2016-01-01

    Richard P Deane, Deirdre J Murphy Department of Obstetrics and Gynaecology, Trinity College Dublin, The University of Dublin, Coombe Women & Infants University Hospital, Dublin, Republic of Ireland  Background: Despite the widespread introduction of active learning strategies to engage students across modern medical curricula, student attendance and attendance monitoring remain a challenging issue for medical educators. In addition, there is little published...

  6. The Effect of Multicultural Experience in Conflicts Management Styles: Mediation of Cultural Intelligence and Self-Monitoring

    Directory of Open Access Journals (Sweden)

    Gabriela Gonçalves

    2015-03-01

    Full Text Available Conflict is an inevitable reality both in personal and in organizational life. For being inevitable, the conflict must be managed Defined as a process that occurs when one party feels adversely affected by another (e.g., De Dreu, 1997 the conflict management styles can be analysed as a function of personality variables. In this respect the cultural intelligence, self-monitoring and self-interdependent seem to be relevant variables, since characterised by flexibility and interest in other aspects present in conflict management styles. In this study, we propose that cultural intelligence, associated with the self-interdependent and self-monitoring, can have a positive impact on the choice of most effective interpersonal conflict resolution styles. Being cultural intelligence an attribute of extreme importance, we still sought to determine how the quantity and quality of intercultural contact and self-interdependent present themselves as predictors of it. With a sample of 399 individuals, the proposed model suggests that high levels of cultural intelligence mediated by a high self-monitoring and selfinterdependent positively affect and predict the conflict resolution styles adopted. Given the need to develop abilities aimed at increasing the skills of conflict resolution, this study adds to the existing literature new predictors, contributing to the welfare and performance of human resources, and consequently to success and organizational effectiveness.

  7. A visualization environment for an on-line monitoring and control system for an experiment to search for T-violation in $K^{+}$ decay

    CERN Document Server

    Grigoriev, M P; Ivashkin, A P; Kudenko, Yu G; Mineev, O V; Khabibullin, M M; Aoki, M; Imazato, J; Kuno, Y; Watanabe, A; Igarashi, Y; Yokoi, T; Shimizu, S

    1999-01-01

    The main goal of experiment E246 at the KEK 12-GeV proton synchrotron is the search for the T-odd muon polarization in the decay K/sup +/ to pi /sup 0/ mu /sup +/ nu (K/sub mu 3/). To satisfy the experimental requirements, a graphic user-oriented on-line system for data monitoring and graphic representation of the most significant experimental parameters in the form of histograms, indicators, and 2D-displays has been developed. This paper describes the E246 data acquisition system, on-line system environment, obtained monitoring capabilities, set of graphic user displays, and the GUI development methodology for the high-energy physics on-line visualization. (16 refs).

  8. Planning the improvement of a seismic network for monitoring active volcanic areas: the experience on Mt. Etna

    Science.gov (United States)

    D'Alessandro, A.; Scarfì, L.; Scaltrito, A.; Di Prima, S.; Rapisarda, S.

    2013-10-01

    Seismology and geodesy are generally seen as the most reliable diagnostic tools for monitoring highly active or erupting volcanoes, like Mt. Etna. From the early 1980's, seismic activity was monitored at Mt. Etna by a permanent seismic network, progressively improved in the following years. This network has been considerably enhanced since 2005 by 24-bit digital stations equipped with broad-band (40 s) sensors. Today, thanks to a configuration of 33 broad-band and 12 short-period stations, we have a good coverage of the volcanic area as well as a high quality of the collected data. In the framework of the VULCAMED project a workgroup of Istituto Nazionale di Geofisica e Vulcanologia has taken on the task of developing the seismic monitoring system, through the installation of other seismic stations. The choice of optimal sites must be clearly made through a careful analysis of the geometry of the existing seismic network. In this paper, we applied the Seismic Network Evaluation through Simulation in order to evaluate the performance of the Etna Seismic Network before and after the addition of the stations in the candidate sites. The main advantage of the adopted method is that we can evaluate the improvement of the network before the actual installation of the stations. Our analysis has permitted to identify some critical issues of the current permanent seismic network related to the lack of stations in the southern sector of the volcano, which is nevertheless affected by a number of seismogenic structures. We have showed that the addition of stations at the candidate sites would greatly extend the coverage of the network to the south by significantly reducing the errors in the hypocenter parameters estimation.

  9. Using relative and absolute measures for monitoring health inequalities: experiences from cross-national analyses on maternal and child health

    Directory of Open Access Journals (Sweden)

    Huisman Martijn

    2007-10-01

    Full Text Available Abstract Background As reducing socio-economic inequalities in health is an important public health objective, monitoring of these inequalities is an important public health task. The specific inequality measure used can influence the conclusions drawn, and there is no consensus on which measure is most meaningful. The key issue raising most debate is whether to use relative or absolute inequality measures. Our paper aims to inform this debate and develop recommendations for monitoring health inequalities on the basis of empirical analyses for a broad range of developing countries. Methods Wealth-group specific data on under-5 mortality, immunisation coverage, antenatal and delivery care for 43 countries were obtained from the Demographic and Health Surveys. These data were used to describe the association between the overall level of these outcomes on the one hand, and relative and absolute poor-rich inequalities in these outcomes on the other. Results We demonstrate that the values that the absolute and relative inequality measures can take are bound by mathematical ceilings. Yet, even where these ceilings do not play a role, the magnitude of inequality is correlated with the overall level of the outcome. The observed tendencies are, however, not necessities. There are countries with low mortality levels and low relative inequalities. Also absolute inequalities showed variation at most overall levels. Conclusion Our study shows that both absolute and relative inequality measures can be meaningful for monitoring inequalities, provided that the overall level of the outcome is taken into account. Suggestions are given on how to do this. In addition, our paper presents data that can be used for benchmarking of inequalities in the field of maternal and child health in low and middle-income countries.

  10. [Ambulatory esophageal pH monitoring: critical review of methodology: (equipment, reproducibility, standards), clinical importance and personal experience].

    Science.gov (United States)

    Jonard, P; Fiasse, R; Tomé, G; Dive, C

    1990-01-01

    The authors review the recent literature about the methodology of oesophageal pH monitoring, which has a high sensitivity and a high specificity for assessing gastro-oesophageal reflux. Combined electrodes offer most advantages. Ambulatory recording should be done in hospital under standard conditions (meals), particularly for clinical studies. The best clinical indication is to detect pathological reflux in case of atypical symptoms with negative oesophagoscopy. The authors give their normal values in a series of measurements with two systems as well as their results in a series of cases of oesophagitis of various grades.

  11. Indian deep-sea environment experiment (INDEX): Monitoring the restoration of marine enviroment after artificial disturbance to simulate deep-sea mining in central Indian Basin

    Digital Repository Service at National Institute of Oceanography (India)

    Sharma, R.

    of the experiment on the benthic ecosystem that were published in Marine Georesources and Geotechnology (Volume 18, No. 3, 2000) and Deep-Sea Research (Volume 48, No. 16, 2001). The correct order of the papers should have been: Monitoring the Impact of Simulated... of the National Institute of Oceanography, India, has been published in the Marine Georesources and Geotechnology journal, vol. 23 (September–December 2005). It has 11 papers dealing with different aspects of deep-sea environment asso- ciated with polymetallic...

  12. A Brazilian experience of the self transglutaminase-based test for celiac disease case finding and diet monitoring

    Institute of Scientific and Technical Information of China (English)

    Lorete Maria da Silva Kotze; Ana Paula Brambila Rodrigues; Luiz Roberto Kotze; Renato Mitsunori Nisihara

    2009-01-01

    AIM: To evaluate the effectiveness of a rapid and easy fingertip whole blood point-of-care test for celiac disease (CD) case finding and diet monitoring.METHODS: Three hundred individuals, 206 females (68.7%) and 94 males (31.3%), were submitted to a rapid and easy immunoglobulin-A-class fingertip whole blood point-of-care test in the doctor's office in order to make immediate clinical decisions: 13 healthy controls, 6 with CD suspicion, 46 treated celiacs, 84 relatives of the celiac patients, 69 patients with dyspepsia, 64 with irritable bowel syndrome (IBS), 8 with Crohn's disease and 9 with other causes of diarrhea.RESULTS: Upper gastrointestinal endoscopy with duodenal biopsies was performed in patients with CD suspicion and in individuals with positive test outcome: in 83.3% (5/6) of the patients with CD suspicion, in 100% of the patients that admitted gluten-free diet transgressions (6/6), in 3.8% of first-degree relatives (3/79) and in 2.9% of patients with dyspepsia (2/69). In all these individuals duodenal biopsies confirmed CD (Marsh's histological classification). The studied test showed good correlation with serologic antibodies, endoscopic and histological findings.CONCLUSION: The point-of-care test was as reliable as conventional serological tests in detecting CD cases and in CD diet monitoring.

  13. The Danish Fracture Database can monitor quality of fracture-related surgery, surgeons' experience level and extent of supervision

    DEFF Research Database (Denmark)

    Andersen, M. J.; Gromov, K.; Brix, M.

    2014-01-01

    INTRODUCTION: The importance of supervision and of surgeons' level of experience in relation to patient outcome have been demonstrated in both hip fracture and arthroplasty surgery. The aim of this study was to describe the surgeons' experience level and the extent of supervision for: 1) fracture...... on the surgeons' level of experience, extent of supervision, type (primary, planned secondary or reoperation), classification (AO Muller), and whether they were performed during or outside regular hours. RESULTS: Interns and junior residents combined performed 46% of all procedures. A total of 90% of surgeries...... by interns were performed under supervision, whereas 32% of operations by junior residents were unsupervised. Supervision was absent in 14-16% and 22-33% of the three most frequent primary procedures and reoperations when performed by interns and junior residents, respectively. The proportion of unsupervised...

  14. The Danish Fracture Database can monitor quality of fracture-related surgery, surgeons' experience level and extent of supervision

    DEFF Research Database (Denmark)

    Andersen, Morten Jon; Gromov, Kirill; Brix, Michael

    2014-01-01

    INTRODUCTION: The importance of supervision and of surgeons' level of experience in relation to patient outcome have been demonstrated in both hip fracture and arthroplasty surgery. The aim of this study was to describe the surgeons' experience level and the extent of supervision for: 1) fracture......-related surgery in general; 2) the three most frequent primary operations and reoperations; and 3) primary operations during and outside regular working hours. MATERIAL AND METHODS: A total of 9,767 surgical procedures were identified from the Danish Fracture Database (DFDB). Procedures were grouped based...... on the surgeons' level of experience, extent of supervision, type (primary, planned secondary or reoperation), classification (AO Müller), and whether they were performed during or outside regular hours. RESULTS: Interns and junior residents combined performed 46% of all procedures. A total of 90% of surgeries...

  15. The Danish Fracture Database can monitor quality of fracture-related surgery, surgeons' experience level and extent of supervision

    DEFF Research Database (Denmark)

    Andersen, M. J.; Gromov, K.; Brix, M.

    2014-01-01

    INTRODUCTION: The importance of supervision and of surgeons' level of experience in relation to patient outcome have been demonstrated in both hip fracture and arthroplasty surgery. The aim of this study was to describe the surgeons' experience level and the extent of supervision for: 1) fracture......-related surgery in general; 2) the three most frequent primary operations and reoperations; and 3) primary operations during and outside regular working hours. MATERIAL AND METHODS: A total of 9,767 surgical procedures were identified from the Danish Fracture Database (DFDB). Procedures were grouped based...... on the surgeons' level of experience, extent of supervision, type (primary, planned secondary or reoperation), classification (AO Muller), and whether they were performed during or outside regular hours. RESULTS: Interns and junior residents combined performed 46% of all procedures. A total of 90% of surgeries...

  16. Air Quality Monitoring Concept for Embedded System Experiment%基于空气质量监测的嵌入式实验构想

    Institute of Scientific and Technical Information of China (English)

    耿淑琴; 汪金辉; 侯立刚; 袁颖; 彭晓宏

    2015-01-01

    Air quality monitoring is an important part of the current environmental protection. The embedded system experiment based on air quality monitoring system, Air quality polluted components such as temperature, humidity, CO, PM2.5, NO2, SO2, O3, VCO, smoke and so on, these sensors are used in this system. System level low power design, and signal processing, interface, and protocol configuration are completed. Create a scalable smart sensor module. It is explored a new mode of education embedded systems with the current air quality monitoring closely.%空气质量监测是当前环境保护的一项重要内容。建立基于空气质量监测的嵌入式实验系统架构,采用空气质量污染的主要成分如CO,PM2.5,温度,湿度,NO2,SO2,O3,VCO和烟雾等传感器,并进行系统级低功耗设计、信号调理、统一接口和协议配置,建立方便可裁剪的智能传感器模块,将嵌入式系统与当前空气质量监测紧密结合,探讨新的教育模式。

  17. Radiation damage in the diamond based beam condition monitors of the CMS experiment at the Large Hadron Collider (LHC) at CERN

    CERN Document Server

    Guthoff, Moritz; Dabrowski, Anne; De Boer, Wim; Stickland, David; Lange, Wolfgang; Lohmann, Wolfgang

    2013-01-01

    The Beam Condition Monitor (BCM) of the CMS detector at the LHC is a protection device similar to the LHC Beam Loss Monitor system. While the electronics used is the same, poly-crystalline Chemical Vapor Deposition (pCVD) diamonds are used instead of ionization chambers as the BCM sensor material. The main purpose of the system is the protection of the silicon Pixel and Strip tracking detectors by inducing a beam dump, if the beam losses are too high in the CMS detector. By comparing the detector current with the instantaneous luminosity, the BCM detector ef fi ciency can be monitored. The number of radiation-induced defects in the diamond, reduces the charge collection distance, and hence lowers the signal. The number of these induced defects can be simulated using the FLUKA Monte Carlo simulation. The cross-section for creating defects increases with decreasing energies of the impinging particles. This explains, why diamond sensors mounted close to heavy calorimeters experience more radiation damage, becaus...

  18. Active bio-monitoring of contamination in aquatic systems--an in situ translocation experiment applying the PICT concept.

    Science.gov (United States)

    Rotter, Stefanie; Sans-Piché, Frédéric; Streck, Georg; Altenburger, Rolf; Schmitt-Jansen, Mechthild

    2011-01-17

    The environmental risk assessment of toxicants is often derived from chemical monitoring, based on single species tests performed in the laboratory. However, to provide ecologically relevant information, community approaches are required. The aim of this study was to causally link prometryn exposure to community-level effects in complex field situations and to identify response times of adaptation to pollution and recovery from pollution. For this reason sensitivity shifts in communities were detected and related to structural changes within the periphyton community. Furthermore, it was intended to illustrate the possibility of a combined approach of community translocation and sensitivity assessment for active monitoring of polluted sites. Periphyton was grown at a reference (R) and at a polluted (P) site of the river Elbe basin for 26 days, was subsequently transferred from the polluted site to the reference site and vice versa. Sensitivity of communities to prometryn was determined according to the pollution-induced community tolerance (PICT)-concept in short-term tests by measuring photosynthesis inhibition and was related to structural changes in algal class and diatom species composition. Exposure to prometryn was determined using polar organic integrative samplers (POCIS), giving time-weighted average concentrations. Environmental concentrations of prometryn were significantly higher at the polluted site compared to the reference site. Communities grown at the polluted site showed a higher tolerance to prometryn in comparison to the reference site. 17 Days after the translocation to the reference site, EC(50) decreased 2-fold compared to the non-translocated P-community of the same age. By contrast, EC(50) of the community grown at the reference site was 5 times higher after 17 days exposure at the polluted site. Furthermore, P-R communities were less sensitive to prometryn (higher EC(50)) than R-P communities, 24 days after translocation. These changes in

  19. More Ideas for Monitoring Biological Experiments with the BBC Computer: Absorption Spectra, Yeast Growth, Enzyme Reactions and Animal Behaviour.

    Science.gov (United States)

    Openshaw, Peter

    1988-01-01

    Presented are five ideas for A-level biology experiments using a laboratory computer interface. Topics investigated include photosynthesis, yeast growth, animal movements, pulse rates, and oxygen consumption and production by organisms. Includes instructions specific to the BBC computer system. (CW)

  20. Towards offline PET monitoring at a cyclotron-based proton therapy facility. Experiments and Monte Carlo simulations

    Energy Technology Data Exchange (ETDEWEB)

    Wuerl, Matthias

    2016-08-01

    Matthias Wuerl presents two essential steps to implement offline PET monitoring of proton dose delivery at a clinical facility, namely the setting up of an accurate Monte Carlo model of the clinical beamline and the experimental validation of positron emitter production cross-sections. In the first part, the field size dependence of the dose output is described for scanned proton beams. Both the Monte Carlo and an analytical computational beam model were able to accurately predict target dose, while the latter tends to overestimate dose in normal tissue. In the second part, the author presents PET measurements of different phantom materials, which were activated by the proton beam. The results indicate that for an irradiation with a high number of protons for the sake of good statistics, dead time losses of the PET scanner may become important and lead to an underestimation of positron-emitter production yields.

  1. Results from the LIMS experiment for the PMP-1 winter 1978/79. [Limb Infrared Monitor of the Stratosphere

    Science.gov (United States)

    Gille, J. C.; Bailey, P. L.; Lyjak, L. V.; Russell, J. M., III

    1982-01-01

    The results of a preliminary analysis of the data on the global distributions of temperature and trace constituents in the middle atmosphere (15-65 km) obtained with the limb IR monitor (LIMS) are presented. The 6-channel limb-scanning radiometer was sensitive to the 15 micron bands of CO2, as well as other wavelengths, and was launched on the Nimbus 7 satellite in 1978. The derived data were partially compared with Soviet rocketsonde data to track an evolution in a warming trend over Siberia. The morphology of the changes were attributed to stratospheric warming. The comparisons with rocketsonde data indicated that the LIMS data were suitable for the determination of planetary wave amplitudes and phases, heat and momentum transport, and Eliassen-Palm fluxes.

  2. Monitoring temporal opacity fluctuations of large structures with muon tomography : a calibration experiment using a water tower tank

    CERN Document Server

    Jourde, Kevin; Marteau, Jacques; d'Ars, Jean de Bremond; Gardien, Serge; Girerd, Claude; Ianigro, Jean-Christophe

    2015-01-01

    The idea of using secondary cosmic muons to scan the internal structure of a given body has known significant developments since the first archaeological application by Alvarez and collaborators on the Gizah pyramids. Recent applications cover the fields of volcanology, hydrology, civil engineering, mining, archaeology etc. Muon radiography features are essentially identical to those of medical X-ray imaging techniques. It is a contrast densitometry method using the screening effect of the body under study on the natural flux of cosmic muons. This technique is non-invasive and complements the standard geophysical techniques, e.g. electrical tomography or gravimetry. It may be applied to a large variety of geological targets, among which the domes of active volcanoes. In this context muon tomography presents the noticeable advantage to perform measurements of large volumes, with a large aperture, from a distant point, far from the potentially dangerous zones. The same conclusions apply regarding the monitoring...

  3. Reducing the loss of vaccines from accidental freezing in the cold chain: the experience of continuous temperature monitoring in Tunisia.

    Science.gov (United States)

    Lloyd, John; Lydon, Patrick; Ouhichi, Ramzi; Zaffran, Michel

    2015-02-11

    Accidental freezing of vaccines is a growing threat and a real risk for national immunization programs when the potency of many vaccines can be compromised if these are exposed to sub-zero temperatures in the cold chain. In Tunisia, this issue is compounded by using sub-standard domestic cold chain equipment instead of equipping the program with medical refrigerators designed specifically for storing vaccines and temperature sensitive pharmaceuticals. Against this backdrop, this paper presents the findings of a demonstration project conducted in Tunisia in 2012 that tested the impact of introducing several freeze prevention solutions to mitigate the risk of accidental freezing of vaccines. The main finding is that, despite the continued use of underperforming domestic refrigerators, continuous temperature monitoring using new technologies combined with other technological interventions significantly reduced the prevalence of accidental exposure to freezing temperatures. These improvements were noticed for cold chain storage at regional, district and health center levels, and during the transport legs that were part of the demonstration conducted in the regions of Kasserine in the South-Eastern part of Tunisia. Subsequent to introducing these freeze prevention solutions, the incidence of freeze alarms was reduced and the percent of time the temperatures dropped below the 2 °C recommended threshold. The incidence of freeze alarms at health center level was reduced by 40%. Lastly, the solutions implemented reduced risk of freezing during transport from 13.8% to 1.7%. Although the solution implemented is not optimal in the longer term because domestic refrigerators are used extensively in district stores and health centers, the risk of accidental freezing is significantly reduced by introducing the practice of continuous temperature monitoring as a standard. The management of the cold chain equipment was strengthened as a result which helps protect the potency of

  4. Combined Daily Monitoring of Aerosol Optical Depths and Water Vapour Column Content during LACE 98 and LITFASS 98 Experiments

    CERN Document Server

    Novikov, V V; Alekseeva, G A; Galkin, V D; Güldner, J; Naebert, T; Service, German Weather; Observatory, Meteorological; Lindenberg,; Germany,; Sciences, Russian Academy of; Observatory, Pulkovo; Petersburg, St; Russia,

    2010-01-01

    During summer of 1998 two large-scale complex campaigns, LITFASS98 (May 25th to June 22nd) and LACE98 (July 13th to August 14th), took place at the Meteorological Observatory Lindenberg (MOL). The aim of both experiments focus on the intensive daily observations of atmospheric conditions and the determination of their fundamental meteorological parameters in the vertical column over Lindenberg (Lindenberg's Column). About 20 German research institutions and addition one from the Netherlands, Austria and Russia participated at the experiments. A wide variety of ground-based instruments was operated in Lindenberg and Falkenberg, including LIDARs, microwave radiometer and radiosondes complemented by tethered balloons and aircraft measurements. For the first time the star- and sunphotometer of MOL were used together with other geophysical tools. The observations with both photometers were carried out practically every day and night except during absolutely overcast conditions. The observed data were processed imm...

  5. A summary of the test procedures and operational details of an ocean dumping pollution monitoring experiment conducted 7 October 1976

    Science.gov (United States)

    Hypes, W. D.; Wallace, J. W.; Gurganus, E. A.

    1977-01-01

    A remote sensor experiment was conducted at a sewage sludge dump site off the Delaware/Maryland coast. Two aircraft serving as remote sensor platforms flew over the dump site during a sludge dump. One aircraft carried a multispectral scanner and the other aircraft carried a rapid scanning spectrometer. Data from sea-truth stations were collected concurrent with overpasses of the aircraft. All sensors were operational and produced good digital data.

  6. Assessing the need for a protocol in monitoring weight loss and nutritional status in orthognathic surgery based on patients experiences.

    Science.gov (United States)

    Ruslin, Muhammad; Dekker, Hannah; Tuinzing, Dirk B; Forouzanfar, Tymour

    2017-02-01

    To investigate retrospectively the orthognathic surgery (OGS) patients experience in weight loss and the influence of gender, age, duration of the surgical procedure, length of hospital stay, location of surgery and use of intermaxillary fixation (IMF) or without IMF on postoperative weight loss. A total of 4487 patients treated by OGS where all patients visited the outpatient clinic one, three and six weeks after the surgical procedure. After six weeks, patients filled out a questionnaire in which weight loss was addressed. The patients were asked to give an estimate of their experiences weight loss. The population was first divided in two groups weight loss and no weight loss. In the weight loss group there is no significant difference in weight loss between patients with IMF and patients without IMF. In the weight loss group there were significantly more females then males. Further, in the subgroup IMF the operation time was significantly longer compared with the subgroup without IMF. The other parameters including age and hospital stay were not different in the groups. IMF in orthognathic treatment does not result in a difference self-reported loss of body weight compared to patients without IMF. Treatment protocols should include pre- and post-operative dietician consultations and possible indications for medical nutrition and vitamins. Key words:Assessing, protocol, weight loss, experiences, orthognathic surgery.

  7. Assessing the need for a protocol in monitoring weight loss and nutritional status in orthognathic surgery based on patients experiences

    Science.gov (United States)

    Dekker, Hannah; Tuinzing, Dirk B.; Forouzanfar, Tymour

    2017-01-01

    Background To investigate retrospectively the orthognathic surgery (OGS) patients experience in weight loss and the influence of gender, age, duration of the surgical procedure, length of hospital stay, location of surgery and use of intermaxillary fixation (IMF) or without IMF on postoperative weight loss. Material and Methods A total of 4487 patients treated by OGS where all patients visited the outpatient clinic one, three and six weeks after the surgical procedure. After six weeks, patients filled out a questionnaire in which weight loss was addressed. The patients were asked to give an estimate of their experiences weight loss. The population was first divided in two groups weight loss and no weight loss. Results In the weight loss group there is no significant difference in weight loss between patients with IMF and patients without IMF. In the weight loss group there were significantly more females then males. Further, in the subgroup IMF the operation time was significantly longer compared with the subgroup without IMF. The other parameters including age and hospital stay were not different in the groups. Conclusions IMF in orthognathic treatment does not result in a difference self-reported loss of body weight compared to patients without IMF. Treatment protocols should include pre- and post-operative dietician consultations and possible indications for medical nutrition and vitamins. Key words:Assessing, protocol, weight loss, experiences, orthognathic surgery. PMID:28210448

  8. Post-transplant monitoring of soluble CD30 level as predictor of graft outcome: a single center experience from China.

    Science.gov (United States)

    Wang, Dong; Wu, Weizhen; Yang, Shunliang; Wang, Qinghua; Tan, Jianming

    2012-12-01

    There are no reliable parameters for post-transplantation immunological monitoring, which might enable recipient-tailored immunosuppressive therapy. 250 renal graft recipients were enrolled and detected for sCD30 level pre-transplantation, and on days 5 and 14, and on months 1, 3, 6, 12, 24, 36, 48 and 60 post-transplantation. Analysis was performed on correlation between sCD30 level and acute rejection, lung infection, or graft loss respectively. sCD30 levels descended to a nadir with a mean of 10.2 ± 3.8 U/mL on day 30 post-transplantation, then rose gradually, and approached 21.8 ± 10.1 U/mL on month 3, 34.2 ± 16.5 U/mL on month 6, and 42.9 ± 29.5 U/mL on month 12, then presented a stable level. Recipients with AR had significantly higher sCD30 levels than those without AR on days 5 and 14 post-transplantation. Recipients with pneumonia had significantly lower sCD30 levels within 3 months post-transplantation than those without pneumonia. Significantly higher sCD30 levels were recorded in recipients who suffered graft loss than those with normal graft function on days 5 and 14, and on months 6, 12, and 24. High sCD30 level (≥ 48.3 U/mL) at month 12 post-transplantation has an obvious detrimental effect on renal graft survival (p=0.000, HR=9.075). Serum sCD30 level might reflect immune state of renal graft recipients. Post-transplantation sequential monitoring of sCD30 level is necessary, which might not only identify recipients at the risk of acute rejection and graft loss, but also chosen as an independent predictor of pneumonia in renal transplant recipients. Copyright © 2012 Elsevier B.V. All rights reserved.

  9. The UNDP/World Bank monitoring program on small scale biomass gasifiers (BTG's experience on tar measurements)

    Energy Technology Data Exchange (ETDEWEB)

    Knoef, H.A.M. [Biomass Technology Group BTG, Enschede (Netherlands)

    2000-07-01

    By the time that small-scale biomass gasifiers were 'rediscovered' and promoted for use in developing countries (1970s), UNDP and the World Bank were well aware of the pitfalls of previous attempts to diffuse decentralized energy technologies. Therefore they decided to initiate a technology assessment programme before endorsing and/or stimulating a widespread gasifier introduction programme in developing countries. On July 1, 1983, the UNDP/WB worldwide Small-scale biomass gasifier monitoring was initiated, which was to {sup c}ollect uniform data on the actual field performance, economics, safety and public acceptability of biomass gasifiers currently operating in developing countries{sup .} For the UNDP/WB program BTG developed a tar measuring protocol which was used at twenty gasifiers worldwide (Indonesia, Philippines, Brazil, Mali, Seychelles, Vanuatu and Burundi). Other parameters monitored include pressure and temperatures at various spots, gasflow, fuel consumption, lubrication oil analyses, gas-composition analyses, emission measurements. The seven year programme showed that most of donor funded projects failed, mainly because there was not sufficient commitment from involved parties. National programs on the utilization of loca available biomass resources mostly failed because the fuel did not suit the requirements of gasifier reactor. In case of proper project design/set-up most of the small scale biomass gasifiers operated without major problems. Examples of such projects are the ones in Balong and Majalengka (Indonesia) Onesua (Vanuatu), Espara Feliz (Brazil) and Dogofiry (Mali). A motivated team of technicians, operators, managers is one the most important items within this respect. Most of the heat gasifiers are installed commercially and are much more successful compared to the subsidized power gasifiers. Local manufactured gasifiers are generally constructed of low quality materials causing frequent technical problems. However, locally

  10. Simultaneous and independent multi-parameter monitoring with fault localization for DSP-based coherent communication systems.

    Science.gov (United States)

    Shen, Thomas Shun Rong; Lau, Alan Pak Tao; Yu, Changyuan

    2010-11-08

    Digital signal processing (DSP)-based coherent communications have become standard for future high-speed optical networks. Implementing DSP-based advanced algorithms for data detection requires much more detailed knowledge of the transmission link parameters, resulting in optical performance monitoring (OPM) being even more important for next generation systems. At the same time, the DSP platform also enables new strategies for OPM. In this paper, we propose the use of pilot symbols with alternating power levels and study the statistics of the received power and phase difference to simultaneously and independently monitor the carrier frequency offset between transmitter and receiver laser, laser linewidth, number of spans, fiber nonlinearity parameters as well as optical signal-to-noise ratio (OSNR) of a transmission link. Analytical predictions are verified by simulation results for systems with full chromatic dispersion (CD) compensation per span and 10% CD under-compensation per span. In addition, we show that by monitoring the changes in the statistics of the received pilot symbols during network operation, one can locate faults or OSNR degradations along a transmission link without additional monitoring equipments at intermediate nodes, which may be useful for more efficient dynamic routing and network management.

  11. OPERATIONAL EXPERIENCE WITH FAST FIBER-OPTIC BEAM LOSS MONITORS FOR THE ADVANCED PHOTON SOURCE STORAGE RING SUPERCONDUCTING UNDULATORS

    Energy Technology Data Exchange (ETDEWEB)

    Dooling, J.; Harkay, K.; Sajaev, V.; Shang, H.

    2017-06-25

    Fast fiber-optic (FFO) beam loss monitors (BLMs) installed with the first two superconducting undulators (SCUs) in the Advanced Photon Source storage ring have proven to be a useful diagnostic for measuring deposited charge (energy) during rapid beam loss events. The first set of FFOBLMs were installed outside the cryostat of the short SCU, a 0.33-m long device, above and below the beam centerline. The second set are mounted with the first 1.1-mlong SCU within the cryostat, on the outboard and inboard sides of the vacuum chamber. The next 1.1-m-long SCU is scheduled to replace the short SCU later in 2016 and will be fitted with FFOBLMs in a manner similar to original 1.1-m device. The FFOBLMs were employed to set timing and voltage for the abort kicker (AK) system. The AK helps to prevent quenching of the SCUs during beam dumps [1] by directing the beam away from the SC magnet windings. The AK is triggered by the Machine Protection System (MPS). In cases when the AK fails to prevent quenching, the FFOBLMs show that losses often begin before detection by the MPS.

  12. Do you see what I hear: experiments in multi-channel sound and 3D visualization for network monitoring?

    Science.gov (United States)

    Ballora, Mark; Hall, David L.

    2010-04-01

    Detection of intrusions is a continuing problem in network security. Due to the large volumes of data recorded in Web server logs, analysis is typically forensic, taking place only after a problem has occurred. This paper describes a novel method of representing Web log information through multi-channel sound, while simultaneously visualizing network activity using a 3-D immersive environment. We are exploring the detection of intrusion signatures and patterns, utilizing human aural and visual pattern recognition ability to detect intrusions as they occur. IP addresses and return codes are mapped to an informative and unobtrusive listening environment to act as a situational sound track of Web traffic. Web log data is parsed and formatted using Python, then read as a data array by the synthesis language SuperCollider [1], which renders it as a sonification. This can be done either for the study of pre-existing data sets or in monitoring Web traffic in real time. Components rendered aurally include IP address, geographical information, and server Return Codes. Users can interact with the data, speeding or slowing the speed of representation (for pre-existing data sets) or "mixing" sound components to optimize intelligibility for tracking suspicious activity.

  13. Technical Note: Field experiences using UV/VIS sensors for high-resolution monitoring of nitrate in groundwater

    Science.gov (United States)

    Huebsch, M.; Grimmeisen, F.; Zemann, M.; Fenton, O.; Richards, K. G.; Jordan, P.; Sawarieh, A.; Blum, P.; Goldscheider, N.

    2015-04-01

    Two different in situ spectrophotometers are compared that were used in the field to determine nitrate-nitrogen (NO3-N) concentrations at two distinct spring discharge sites. One sensor was a double wavelength spectrophotometer (DWS) and the other a multiple wavelength spectrophotometer (MWS). The objective of the study was to review the hardware options, determine ease of calibration, accuracy, influence of additional substances and to assess positive and negative aspects of the two sensors as well as troubleshooting and trade-offs. Both sensors are sufficient to monitor highly time-resolved NO3-N concentrations in emergent groundwater. However, the chosen path length of the sensors had a significant influence on the sensitivity and the range of detectable NO3-N. The accuracy of the calculated NO3-N concentrations of the sensors can be affected if the content of additional substances such as turbidity, organic matter, nitrite or hydrogen carbonate significantly varies after the sensors have been calibrated to a particular water matrix. The MWS offers more possibilities for calibration and error detection but requires more expertise compared with the DWS.

  14. Technical Note: Field experiences using UV/VIS sensors for high-resolution monitoring of nitrate in groundwater

    Directory of Open Access Journals (Sweden)

    M. Huebsch

    2014-11-01

    Full Text Available Two different in-situ spectrophotometers are compared that were used in the field to determine nitrate-nitrogen (NO3-N concentrations at two distinct spring discharge sites. One sensor was a double wavelength spectrophotometer (DWS and the other a multiple wavelength spectrophotometer (MWS. The objective of the study was to review the hardware options, determine ease of calibration, accuracy, influence of additional substances and to assess positive and negative aspects of the two sensors as well as troubleshooting and trade-offs. Both sensors are sufficient to monitor highly time-resolved NO3-N concentrations in emergent groundwater. However, the chosen path length of the sensors had a significant influence on the sensitivity and the range of detectable NO3-N. The accuracy of the calculated NO3-N concentrations of the sensors can be affected, if the content of additional substances such as turbidity, organic matter, nitrite or hydrogen carbonate significantly varies after the sensors have been calibrated to a particular water matrix. The MWS offers more possibilities for calibration and error detection, but requires more expertise compared with the DWS.

  15. The Role of Geoelectrical Methods in Monitoring Stimulated Sulfate-Reduction: Insights Gained From Field-Scale Experiments

    Science.gov (United States)

    Williams, K. H.; Kemna, A.; Long, P.; Druhan, J.; Hubbard, S.; Banfield, J.

    2006-12-01

    Understanding how microorganisms influence the physical and chemical properties of the subsurface is hindered by our inability to observe microbial dynamics in real time and with high spatial resolution. Here we investigate the use of time-lapse geoelectrical methods to monitor stimulated sulfate-reduction at the field scale during in-situ acetate amendment at the Rifle, Colorado uranium mill tailings site. Modification of the pore fluid and sediment composition as a result of bisulfide production and mineral precipitation was concomitant with changes in induced polarization (IP) and self-potential (SP) signals. With data collected from both the surface and between boreholes, temporal variations in the IP response were characterized by the development of pronounced phase anomalies related to the precipitation of disordered mackinawite (FeS). Sediment samples recovered from the aquifer showed a close correlation between the location of the IP phase anomalies and the enrichment of acid volatile sulfides. Variations in borehole SP signals closely tracked the onset of sulfate-reduction and primarily resulted from an increase in the concentration of bisulfide adjacent to the measurement electrodes. The magnitude of the SP response was dominated by the galvanic interaction of metallic copper and bisulfide, and it closely approximated the electrochemical cell potential of the anodic and cathodic reactions occurring at the electrode surfaces. Both geolectrical techniques delineated spatially discrete anomalies that appear to reflect the interaction of biostimulation with lithological variability within the aquifer.

  16. Undergraduate Research Experiences in Support of Dryland Monitoring: Field and Satellite Remote Sensing of Change in Savanna Structure, Biomass, and Carbon after Prescribed Fires

    Science.gov (United States)

    Washington-Allen, R. A.; Twidwell, D. L., Jr.; Mendieta, V. P.; Delgado, A.; Redman, B.; Trollope, W. S.; Trollope, L.; Govender, N.; Smit, I.; Popescu, S. C.; de Bruno Austin, C.; Reeves, M. C.

    2009-12-01

    The status and trend of degradation in the world’s Drylands, that support over 1.2 billion people, is unknown because monitoring & assessment has not occurred on a globally consistent basis and skilled personnel with a cultivated interest in natural resource science and management are lacking. A major monitoring dataset is the 37-year Landsat data archive that has been released free to the world, but this dataset requires persons who understand how to process and interpret this and similar datasets applicable to the desertification problem. The College of Agriculture & Life Sciences (COALS) at Texas A&M University (TAMU) has an initiative to provide undergraduates with both international and research experiences. The lead author used start-up money, USFS project funds for livestock footprint studies in the US, and seed money from COALS to 1) develop academic mentor contacts in Mozambique, Namibia, Botswana, South Africa, and Tunisia to prepare a National Science Foundation Research Experience for Undergraduates (NSF-REU) Site proposal and 2) launch a pilot REU for two TAMU undergraduate students. Mr. Delgado and Mr. Redman received lidar processing and visualization, field survey training on global positioning systems (GPS), terrestrial LIDAR, and ground penetrating radar technologies and conducted carbon change studies by collecting pre- and post-fire laser scans on experimental burn (EPB) sites in Texas and South Africa. Mr. Redman also developed GIS databases of Landsat timeseries for these EPBs and others in southern Africa. Mr. Delgado participated in the Savanna Fire Ignition Research Experiment (SavFIRE) in Kruger National Park (KNP) by collected laser scan data on 3 EPBs. He also received mentoring from Dr. Winston Trollope, a prominent fire ecologist, and Mr. Chris Austin both of Working with Fire International and Navashni Govender, KNP’s Fire Ecologist. He also was an active participant in a NASA sponsored workshop on remote sensing of global

  17. Monitoring and Management of Karstic Coastal Groundwater in a Changing Environment (Southern Italy: A Review of a Regional Experience

    Directory of Open Access Journals (Sweden)

    Maurizio Polemio

    2016-04-01

    Full Text Available The population concentration in coastal areas and the increase of groundwater discharge in combination with the peculiarities of karstic coastal aquifers constitute a huge worldwide problem, which is particularly relevant for coastal aquifers of the Mediterranean basin. This paper offers a review of scientific activities realized to pursue the optimal utilization of Apulian coastal groundwater. Apulia, with a coastline extending for over 800 km, is the Italian region with the largest coastal karst aquifers. Apulian aquifers have suffered both in terms of water quality and quantity. Some regional regulations were implemented from the 1970s with the purpose of controlling the number of wells, well locations, and well discharge. The practical effects of these management criteria, the temporal and spatial trend of recharge, groundwater quality, and seawater intrusion effects are discussed based on long-term monitoring. The efficacy of existing management tools and the development of predictive scenarios to identify the best way to reconcile irrigation and demands for high-quality drinking water have been pursued in a selected area. The Salento peninsula was selected as the Apulian aquifer portion exposed to the highest risk of quality degradation due to seawater intrusion. The capability of large-scale numerical models in groundwater management was tested, particularly for achieving forecast scenarios to evaluate the impacts of climate change on groundwater resources. The results show qualitative and quantitative groundwater trends from 1930 to 2060 and emphasize the substantial decrease of the piezometric level and a serious worsening of groundwater salinization due to seawater intrusion.

  18. Direct oxymetric peripheral tissue perfusion monitoring during open heart surgery with the use of cardiopulmonary bypass: preliminary experience.

    Science.gov (United States)

    Lonsky, V; Svitek, V; Brzek, V; Kubicek, J; Volt, M; Horak, M; Mandak, J

    2011-11-01

    Regional hypoperfusion has been associated with the development of postoperative organ dysfunction in cardiac surgery involving cardiopulmonary bypass (CPB). Direct tissue oxymetry is a potentially new method for monitoring the quality of the peripheral tissue perfusion during CPB. The aim of this study was to assess the effects of CPB in skeletal muscle oxygenation when measured in the deltoid muscle by direct oxymetry during perioperative period. Seven patients underwent on-pump coronary artery bypass grafting. Direct oxymetry was performed by an optical cathether introduced into the deltoid muscle. Continuous measurement was made during the surgical procedure and the postoperative period. Mean arterial blood pressure, blood flow during CPB, laboratory markers of tissue hypoperfusion, blood gases and body temperature were also recorded. Interstitial muscle tissue oxygen tension (pO(2)) decreased after the introduction to anaesthesia and, more significantly, during CPB. After the disconnection from CPB at the end of the operation, the pO(2) returned to pre-anaesthetic values. During the first hours after admission of the patients to the intensive care unit, the pO(2) progressively decreased, reached a minimum value after four hours, and increased slowly thereafter. There was a significant correlation of pO(2) with mean arterial blood pressure and blood flow during that time. The result of this first measurement seems to demonstrate that the standard technique of conducting cardiopulmonary bypass produces low muscle oxygen tension and, thus, little perfusion of skeletal muscle. The data also indicate that both high mean arterial blood pressure and high flow are necessary during CPB to ensure skeletal muscle perfusion. The investigation is continuing.

  19. [Disease monitoring and surveillance systems and the role of public and private animal health agents: the experience of Africa].

    Science.gov (United States)

    Roger, F; Thonnat, J; Hendrikx, P; Domenech, J

    2004-04-01

    The current importance of animal diseases, and their emergence or re-emergence, show that surveillance is crucial for defining suitable control measures. Surveillance systems rely on networks of different people, whose activities include collecting, transmitting, analysing and disseminating disease information. These activities can be distributed among both the public and private sectors. However, nowadays it is essential to clearly define the different roles of the public and private sectors. In Africa, where budget cuts for state Veterinary Services over a number of years have promoted the growth of private veterinary medicine, the tasks of public officials (veterinarians, technicians, etc.) and private sector workers (veterinarians, livestock farmers) must be clearly determined and harmonised. This article presents and comments upon a number of different experiments that various sub-Saharan African countries have conducted in this field.

  20. Simultaneous and independent optical impairments monitoring using singular spectrum analysis of asynchronously sampled signal amplitudes

    Science.gov (United States)

    Guesmi, Latifa; Menif, Mourad

    2015-09-01

    Optical performance monitoring (OPM) becomes an inviting topic in high speed optical communication networks. In this paper, a novel technique of OPM based on a new elaborated computation approach of singular spectrum analysis (SSA) for time series prediction is presented. Indeed, various optical impairments among chromatic dispersion (CD), polarization mode dispersion (PMD) and amplified spontaneous emission (ASE) noise are a major factors limiting quality of transmission data in the systems with data rates lager than 40 Gbit/s. This technique proposed an independent and simultaneous multi-impairments monitoring, where we used SSA of time series analysis and forecasting. It has proven their usefulness in the temporal analysis of short and noisy time series in several fields, that it is based on the singular value decomposition (SVD). Also, advanced optical modulation formats (100 Gbit/s non-return-to zero dual-polarization quadrature phase shift keying (NRZ-DP-QPSK) and 160 Gbit/s DP-16 quadrature amplitude modulation (DP-16QAM)) offering high spectral efficiencies have been successfully employed by analyzing their asynchronously sampled amplitude. The simulated results proved that our method is efficient on CD, first-order PMD, Q-factor and OSNR monitoring, which enabled large monitoring ranges, the CD in the range of 170-1700 ps/nm.Km and 170-1110 ps/nm.Km for 100 Gbit/s NRZ-DP-QPSK and 160 Gbit/s DP-16QAM respectively, and also the DGD up to 20 ps is monitored. We could accurately monitor the OSNR in the range of 10-40 dB with monitoring error remains less than 1 dB in the presence of large accumulated CD.

  1. Erosion research with a digital camera: the structure from motion method used in gully monitoring - field experiments from southern Morocco

    Science.gov (United States)

    Kaiser, Andreas; Rock, Gilles; Neugirg, Fabian; Müller, Christoph; Ries, Johannes

    2014-05-01

    From a geoscientific view arid or semiarid landscapes are often associated with soil degrading erosion processes and thus active geomorphology. In this regard gully incision represents one of the most important influences on surface dynamics. Established approaches to monitor and quantify soil loss require costly and labor-intensive measuring methods: terrestrial or airborne LiDAR scans to create digital elevation models and unmanned airborne vehicles for image acquisition provide adequate tools for geomorphological surveying. Despite their ever advancing abilities, they are finite with their applicability in detailed recordings of complex surfaces. Especially undercuttings and plunge pools in the headcut area of gully systems are invisible or cause shadowing effects. The presented work aims to apply and advance an adequate tool to avoid the above mentioned obstacles and weaknesses of the established methods. The emerging structure from motion-based high resolution 3D-visualisation not only proved to be useful in gully erosion. Moreover, it provides a solid ground for additional applications in geosciences such as surface roughness measurements, quantification of gravitational mass movements or capturing stream connectivity. During field campaigns in semiarid southern Morocco a commercial DSLR camera was used, to produce images that served as input data for software based point cloud and mesh generation. Thus, complex land surfaces could be reconstructed entirely in high resolution by photographing the object from different perspectives. In different scales the resulting 3D-mesh represents a holistic reconstruction of the actual shape complexity with its limits set only by computing capacity. Analysis and visualization of time series of different erosion-related events illustrate the additional benefit of the method. It opens new perspectives on process understanding that can be exploited by open source and commercial software. Results depicted a soil loss of 5

  2. Pharmacist-managed dose adjustment feedback using therapeutic drug monitoring of vancomycin was useful for patients with methicillin-resistant Staphylococcus aureus infections: a single institution experience

    Science.gov (United States)

    Hirano, Ryuichi; Sakamoto, Yuichi; Kitazawa, Junichi; Yamamoto, Shoji; Tachibana, Naoki

    2016-01-01

    Background Vancomycin (VCM) requires dose adjustment based on therapeutic drug monitoring. At Aomori Prefectural Central Hospital, physicians carried out VCM therapeutic drug monitoring based on their experience, because pharmacists did not participate in the dose adjustment. We evaluated the impact of an Antimicrobial Stewardship Program (ASP) on attaining target VCM trough concentrations and pharmacokinetics (PK)/pharmacodynamics (PD) parameters in patients with methicillin-resistant Staphylococcus aureus (MRSA) infections. Materials and methods The ASP was introduced in April 2012. We implemented a prospective audit of prescribed VCM dosages and provided feedback based on measured VCM trough concentrations. In a retrospective pre- and postcomparison study from April 2007 to December 2011 (preimplementation) and from April 2012 to December 2014 (postimplementation), 79 patients were treated for MRSA infection with VCM, and trough concentrations were monitored (pre, n=28; post, n=51). In 65 patients (pre, n=15; post, n=50), 24-hour area under the concentration–time curve (AUC 0–24 h)/minimum inhibitory concentration (MIC) ratios were calculated. Results Pharmacist feedback, which included recommendations for changing dose or using alternative anti-MRSA antibiotics, was highly accepted during postimplementation (88%, 29/33). The number of patients with serum VCM concentrations within the therapeutic range (10–20 μg/mL) was significantly higher during postimplementation (84%, 43/51) than during preimplementation (39%, 11/28) (P400) was significantly higher during postimplementation (84%, 42/50) than during preimplementation (53%, 8/15; P=0.013). There were no significant differences in nephrotoxicity or mortality rate. Conclusion Our ASP increased the percentage of patients that attained optimal VCM trough concentrations and PK/PD parameters, which contributed to the appropriate use of VCM in patients with MRSA infections. PMID:27789965

  3. Radiation damage in the diamond based beam condition monitors of the CMS experiment at the Large Hadron Collider (LHC) at CERN

    Science.gov (United States)

    Guthoff, Moritz; Afanaciev, Konstantin; Dabrowski, Anne; de Boer, Wim; Lange, Wolfgang; Lohmann, Wolfgang; Stickland, David

    2013-12-01

    The Beam Condition Monitor (BCM) of the CMS detector at the LHC is a protection device similar to the LHC Beam Loss Monitor system. While the electronics used is the same, poly-crystalline Chemical Vapor Deposition (pCVD) diamonds are used instead of ionization chambers as the BCM sensor material. The main purpose of the system is the protection of the silicon Pixel and Strip tracking detectors by inducing a beam dump, if the beam losses are too high in the CMS detector. By comparing the detector current with the instantaneous luminosity, the BCM detector efficiency can be monitored. The number of radiation-induced defects in the diamond, reduces the charge collection distance, and hence lowers the signal. The number of these induced defects can be simulated using the FLUKA Monte Carlo simulation. The cross-section for creating defects increases with decreasing energies of the impinging particles. This explains, why diamond sensors mounted close to heavy calorimeters experience more radiation damage, because of the high number of low energy neutrons in these regions. The signal decrease was stronger than expected from the number of simulated defects. Here polarization from trapped charge carriers in the defects is a likely candidate for explaining the difference, as suggested by Transient Current Technique (TCT) measurements. A single-crystalline (sCVD) diamond sensor shows a faster relative signal decrease than a pCVD sensor mounted at the same location. This is expected, since the relative increase in the number of defects is larger in sCVD than in pCVD sensors.

  4. Ultra-stable implanted 83Rb/83mKr electron sources for the energy scale monitoring in the KATRIN experiment

    CERN Document Server

    Zboril, M; Beck, M; Bonn, J; Dragoun, O; Jakubek, J; Johnston, K; Kovalik, A; Otten, E W; Schlösser, K; Slezak, M; Spalek, A; Thümmler, T; Venos, D; Weinheimer, C; Zemlicka, J

    2013-01-01

    The KATRIN experiment aims at the direct model-independent determination of the average electron neutrino mass via the measurement of the endpoint region of the tritium beta decay spectrum. The electron spectrometer of the MAC-E filter type is used, requiring very high stability of the electric filtering potential. This work proves the feasibility of implanted 83Rb/83mKr calibration electron sources which will be utilised in the additional monitor spectrometer sharing the high voltage with the main spectrometer of KATRIN. The source employs conversion electrons of 83mKr which is continuously generated by 83Rb. The K-32 conversion line (kinetic energy of 17.8 keV, natural line width of 2.7 eV) is shown to fulfill the KATRIN requirement of the relative energy stability of +/-1.6 ppm/month. The sources will serve as a standard tool for continuous monitoring of KATRIN's energy scale stability with sub-ppm precision. They may also be used in other applications where the precise conversion lines can be separated fr...

  5. Review of Current Student-Monitoring Techniques used in eLearning-Focused recommender Systems and Learning analytics. The Experience API & LIME model Case Study

    Directory of Open Access Journals (Sweden)

    Alberto Corbi

    2014-09-01

    Full Text Available Recommender systems require input information in order to properly operate and deliver content or behaviour suggestions to end users. eLearning scenarios are no exception. Users are current students and recommendations can be built upon paths (both formal and informal, relationships, behaviours, friends, followers, actions, grades, tutor interaction, etc. A recommender system must somehow retrieve, categorize and work with all these details. There are several ways to do so: from raw and inelegant database access to more curated web APIs or even via HTML scrapping. New server-centric user-action logging and monitoring standard technologies have been presented in past years by several groups, organizations and standard bodies. The Experience API (xAPI, detailed in this article, is one of these. In the first part of this paper we analyse current learner-monitoring techniques as an initialization phase for eLearning recommender systems. We next review standardization efforts in this area; finally, we focus on xAPI and the potential interaction with the LIME model, which will be also summarized below.

  6. Rheometrical experiments with monitoring of resistivity: for a better understanding of the solid-fluid transition in clayey landslides

    Science.gov (United States)

    Carrière, Simon; Bièvre, Grégory; Chambon, Guillaume; Jongmans, Denis; Lebourg, Thomas; Larose, Eric

    2015-04-01

    Landslides are natural and complex phenomena which affect all types of geological formations and present a large variety of size, morphology and displacements rates. Among these phenomena, flow-like events in clay-rich formations are particularly complex due to the unpredictable acceleration and fluidization that characterize them. Because of their suddenness, such landslides constitute serious threat for population living in these areas. The forecast and the understanding of these events has then been an active topic of research in the scientific community during the past decades. In that respect, rheometrical experiments in the laboratory bring some insight into the processes occurring during the solid-fluid transition. In creep tests, the evolution of the shear strain rate is measured under constant levels of shear stress, allowing to follow changes in apparent viscosity with time and to observe fluidization. Rheometrical oscillatory tests have been designed to capture the evolution of the elastic shear modulus G (and hence the shear wave velocity Vs) during these creep phases. Previous results have shown that Vs exhibits a drop at the solid-fluid transition, with complex time-dependent effects which could lead, under transient loading, to the occurrence of Vs variations prior to the transition. A complementary way to understand the processes is to measure the electrical resistivity during these rheometrical tests. This parameter, which depends on the water content and salinity, as well as on the amount of clay particles, could also exhibit some changes before or during the solid-fluid transition. For that purpose, the metallic plates of the rotational rheometer have been replaced by new ones made in an electrically insulating material (PVC) with a configuration of four inserted circular electrodes. Rheometrical tests made with this new apparatus provide similar rheological results. For the electrical tests, the geometrical factor has been computed using Finite

  7. Experiences with non-intrusive monitoring of distribution transformers based on the on-line frequency response

    Directory of Open Access Journals (Sweden)

    E. Gomez Luna

    2015-04-01

    Full Text Available The following article presents the results obtained in experiences that use the Impulse Frequency Response Analysis (IFRA method with a transformer in service. The IFRA method has been implemented in order to transform the transient signals to the frequency domain using Discrete Fourier Transform (DFT. However, it can be considered that the DFT is not the most suitable tool for this type of analysis, since, by definition, this tool is useful for processing stationary signals. Taking that into consideration, the analysis of transient signals could be hypothetically improved by using continuous wavelet transform (CWT, given their variable time/frequency resolution. The analysis of transient signals in Wavelet domain has improved the repeatability of the frequency response curves, as it has been observed in experimental results. The proposed on-line IFRA method, based on Wavelet transform, was validated under load and no-load conditions on a 150 kVA three-phase transformer 13200/225 Volts, in the Campus of the Universidad del Valle, Cali, Colombia.

  8. Design and Outcomes of a Comprehensive Care Experience Level System to Evaluate and Monitor Dental Students' Clinical Progress.

    Science.gov (United States)

    Teich, Sorin T; Roperto, Renato; Alonso, Aurelio A; Lang, Lisa A

    2016-06-01

    A Comprehensive Care Experience Level (CCEL) system that is aligned with Commission on Dental Accreditation (CODA) standards, promotes comprehensive care and prevention, and addresses flaws observed in previous Relative Value Units (RVU)-based programs has been implemented at the School of Dental Medicine, Case Western Reserve University since 2011. The purpose of this article is to report on the design, implementation, and preliminary outcomes of this novel clinical evaluation system. With the development of the CCEL concept, it was decided not to award points for procedures performed on competency exams. The reason behind this decision was that exams are not learning opportunities and are evaluated with summative tools. To determine reasonable alternative requirements, production data from previous classes were gathered and translated into CCEL points. These RVU points had been granted selectively only for restorative procedures completed after the initial preparation stage of the treatment plan, and achievement of the required levels was checked at multiple points during the clinical curriculum. Results of the CCEL system showed that low performing students increased their productivity, overall production at graduation increased significantly, and fluoride utilization to prevent caries rose by an order of magnitude over the RVU system. The CCEL program also allowed early identification and remediation of students having difficulty in the clinic. This successful implementation suggests that the CCEL concept has the potential for widespread adoption by dental schools. This method also can be used as a behavior modification tool to achieve specific patient care or clinical educational goals as illustrated by the way caries prevention was promoted through the program.

  9. Pharmacist-managed dose adjustment feedback using therapeutic drug monitoring of vancomycin was useful for patients with methicillin-resistant Staphylococcus aureus infections: a single institution experience

    Directory of Open Access Journals (Sweden)

    Hirano R

    2016-10-01

    Full Text Available Ryuichi Hirano,1 Yuichi Sakamoto,2 Junichi Kitazawa,2 Shoji Yamamoto,1 Naoki Tachibana2 1Department of Pharmacy, 2Laboratory Medicine and Blood Transfusion, Aomori Prefectural Central Hospital, Aomori-shi, Japan Background: Vancomycin (VCM requires dose adjustment based on therapeutic drug monitoring. At Aomori Prefectural Central Hospital, physicians carried out VCM therapeutic drug monitoring based on their experience, because pharmacists did not participate in the dose adjustment. We evaluated the impact of an Antimicrobial Stewardship Program (ASP on attaining target VCM trough concentrations and pharmacokinetics (PK/pharmacodynamics (PD parameters in patients with methicillin-resistant Staphylococcus aureus (MRSA infections. Materials and methods: The ASP was introduced in April 2012. We implemented a prospective audit of prescribed VCM dosages and provided feedback based on measured VCM trough concentrations. In a retrospective pre- and postcomparison study from April 2007 to December 2011 (preimplementation and from April 2012 to December 2014 (postimplementation, 79 patients were treated for MRSA infection with VCM, and trough concentrations were monitored (pre, n=28; post, n=51. In 65 patients (pre, n=15; post, n=50, 24-hour area under the ­concentration–time curve (AUC 0–24 h/minimum inhibitory concentration (MIC ratios were calculated. Results: Pharmacist feedback, which included recommendations for changing dose or using alternative anti-MRSA antibiotics, was highly accepted during postimplementation (88%, 29/33. The number of patients with serum VCM concentrations within the therapeutic range (10–20 μg/mL was significantly higher during postimplementation (84%, 43/51 than during preimplementation (39%, 11/28 (P<0.01. The percentage of patients who attained target PK/PD parameters (AUC 0–24 h/MIC >400 was significantly higher during postimplementation (84%, 42/50 than during preimplementation (53%, 8/15; P=0.013. There were

  10. Monitoring and forecasting local landslide hazard in the area of Longyearbyen, Svalbard - early progress and experiences from the Autumn 2016 events

    Science.gov (United States)

    Wang, Thea; Krøgli, Ingeborg; Boje, Søren; Colleuille, Hervé

    2017-04-01

    Since 2013 the Norwegian Water Resources and Energy Directorate (NVE) has operated a landslide early warning system (LEWS) for mainland Norway. The Svalbard islands, situated 800 km north of the Norwegian mainland, and 1200 km from the North Pole, are not part of the conventional early warning service. However, following the fatal snow avalanche event 19 Dec. 2015 in the settlement of Longyearbyen (78° north latitude), local authorities and the NVE have initiated monitoring of the hydro-meteorological conditions for the area of Longyearbyen, as an extraordinary precaution. Two operational forecasting teams from the NVE; the snow avalanche and the landslide hazard forecasters, perform hazard assessment related to snow avalanches, slush flows, debris flows, shallow slides and local flooding. This abstract will focus on recent experiences made by the landslide hazard team during the autumn 2016 landslide events, caused by a record setting wet and warm summer and autumn of 2016. The general concept of the Norwegian LEWS is based on frequency intervals of extreme hydro-meteorological conditions. This general concept has been transposed to the Longyearbyen area. Although the climate is considerably colder and drier than mainland Norway, experiences so far are positive and seem useful to the local authorities. Initially, the landslide hazard evaluation was intended to consider only slush flow hazard during the snow covered season. However, due to the extraordinary warm and wet summer and autumn 2016, the landslide hazard forecasters unexpectedly had to issue warnings for the local authorities due to increased risk of shallow landslides and debris flows. This was done in close cooperation with the Norwegian Meteorological Institute, who provided weather forecasts from the recently developed weather prediction model, AROME-Arctic. Two examples, from 14-15 Oct and 8-9 Nov 2016, will be given to demonstrate how the landslide hazard assessment for the Longyearbyen area is

  11. New possibilities in hydrological monitoring offered by experiences of Citizen Science: CITHYD, a web application for hydrometric measurements in rivers

    Science.gov (United States)

    Galimberti, Giacomo; Balbo, Alessandro

    2017-04-01

    experience supports the involvement of local communities in living and take care of the rivers of their territory and can promote the creation of a virtuous circle in data collection through social networks, educational and communication events. It can also be used during emergencies, by authorized users, to collect level measurements for risk management and flood protection. The application has been fully developed and is now at the end of the testing phase. Some Italian local administrations are evaluating the use of CITHYD in small catchments in their territories in order to improve community engagement and resilience.

  12. Realtime infiltration process monitoring in macroporous soil - a plot-scale experiment accompanied by high-resolution time-lapse 3D GPR

    Science.gov (United States)

    Jackisch, Conrad; Allroggen, Niklas

    2016-04-01

    Infiltration and quick vertical redistribution of event water through rapid subsurface flow in soil structures is one of the key issues in hydrology. Although the importance of preferential flow is broadly recognised, our theories, observation techniques and modelling approaches lose grounds when the assumption of well-mixed states in REVs collapses. To characterise the combination of advective and diffusive flow is especially challenging. We have shown in earlier studies that a combination of TDR monitoring, dye- and salt-tracer recovery and time-lapse 3D GPR in irrigation experiments provides means to characterise infiltration dynamics at the plot- and hillslope-scale also in highly structured soils. We pinpointed that the spatial and temporal resolution requires special attention and improvement - particularly owing to the facts of high velocity (10-3 ms-1) of advective flow and small scale (10-2 m) of the respective flow structures. We present insights from a novel technique of continuous high-resolution time-lapse 3D GPR measurements during and after a plot-scale (1 m x 1 m) irrigation experiment. Continuous TDR soil moisture measurements, dye tracer excavation and salt-tracer samples are used as qualitative and quantitative references. While classical infiltration experiments either look at spatial patterns or temporal dynamics at singular gauges, we highlight the advantage of combining both to achieve a more complete image of the infiltration process. Although operating at the limits of the techniques this setup enables non-invasive observation of preferential flow processes in the field and allows to explore and characterise macropore matrix exchange.

  13. The experience sampling method as an mHealth tool to support self-monitoring, self-insight, and personalized health care in clinical practice.

    Science.gov (United States)

    van Os, Jim; Verhagen, Simone; Marsman, Anne; Peeters, Frenk; Bak, Maarten; Marcelis, Machteld; Drukker, Marjan; Reininghaus, Ulrich; Jacobs, Nele; Lataster, Tineke; Simons, Claudia; Lousberg, Richel; Gülöksüz, Sinan; Leue, Carsten; Groot, Peter C; Viechtbauer, Wolfgang; Delespaul, Philippe

    2017-06-01

    The experience sampling method (ESM) builds an intensive time series of experiences and contexts in the flow of daily life, typically consisting of around 70 reports, collected at 8-10 random time points per day over a period of up to 10 days. With the advent of widespread smartphone use, ESM can be used in routine clinical practice. Multiple examples of ESM data collections across different patient groups and settings are shown and discussed, varying from an ESM evaluation of a 6-week randomized trial of mindfulness, to a twin study on emotion dynamics in daily life. Research shows that ESM-based self-monitoring and feedback can enhance resilience by strengthening the capacity to use natural rewards. Personalized trajectories of starting or stopping medication can be more easily initiated and predicted if sensitive feedback data are available in real time. In addition, personalized trajectories of symptoms, cognitive abilities, symptoms impacting on other symptoms, the capacity of the dynamic system of mental health to "bounce back" from disturbance, and patterns of environmental reactivity yield uniquely personal data to support shared decision making and prediction in clinical practice. Finally, ESM makes it possible to develop insight into previous implicit patterns of thought, experience, and behavior, particularly if rapid personalized feedback is available. ESM enhances clinical practice and research. It is empowering, providing co-ownership of the process of diagnosis, treatment evaluation, and routine outcome measurement. Blended care, based on a mix of face-to-face and ESM-based outside-the-office treatment, may reduce costs and improve outcomes. © 2017 Wiley Periodicals, Inc.

  14. Monitoring the interaction of hydraulic fracturing fluid with Marcellus Shale using Sr isotopes: a comparison of laboratory experiments with field scale observations (Invited)

    Science.gov (United States)

    Wall, A. J.; Hakala, A.; Marcon, V.; Joseph, C.

    2013-12-01

    Strontium isotopes have the potential to be an effective tool for differentiating Marcellus Shale derived-fluids from other sources in surface and ground waters (Chapman et al. 2012, doi: 10.1021/es204005g). Water that is co-produced during gas extraction is likely influenced by fluid/rock interactions during hydraulic fracturing (HF) and monitoring changes in Sr isotope ratios can provide insight into reactions occurring within the shale formation. However, questions persist as to what controls the Sr isotopic composition of Marcellus Shale fluids, especially during HF. Here we compare laboratory experiments, simulating the dissolution of the Marcellus Shale during HF, with a time-series of water samples taken from a Marcellus Shale gas wells after HF has occurred. For the laboratory experiments, a core sample of Marcellus Shale from Greene County, PA was crushed and placed into a high P and T reaction vessel. Solutions were added in two different experiments: one with synthetic brine, and another using brine+HF fluid. The HF fluid was made up of components listed on fracfocus.org. Experiments were run for ~16 days at 27.5 MPa and 130oC. Aqueous samples were periodically removed for analysis and Sr isotope ratios were measured by MC-ICP-MS. Using just brine, the pH of the solution decreased from 7.6 to 5.3 after 24 hrs, then reached a steady state at ~6.1. Sr/Ca molar ratios in the fluid started at 2.3 after 24 hours and decreased to 1.8 over ~16 days. During this time only 6% of the total inorganic carbon (TIC) dissolved from the shale. The ɛSr values started at +43.2 and decreased to +42.4. In the experiment using brine+HF fluid, the pH started at 1.8 and rose slowly to a steady value of 5.6 by day 6. The Sr and Ca concentrations were higher than the brine experiment, but the Sr/Ca ratios remained lower at ~0.3 through the experiment. The increased Ca release, as well as the dissolution of over 60% of the TIC, suggests the dissolution of a carbonate mineral

  15. USING CALIBRATED RGB IMAGERY FROM LOW-COST UAVS FOR GRASSLAND MONITORING: CASE STUDY AT THE RENGEN GRASSLAND EXPERIMENT (RGE, GERMANY

    Directory of Open Access Journals (Sweden)

    U. Lussem

    2017-08-01

    Full Text Available Monitoring the spectral response of intensively managed grassland throughout the growing season allows optimizing fertilizer inputs by monitoring plant growth. For example, site-specific fertilizer application as part of precision agriculture (PA management requires information within short time. But, this requires field-based measurements with hyper- or multispectral sensors, which may not be feasible on a day to day farming practice. Exploiting the information of RGB images from consumer grade cameras mounted on unmanned aerial vehicles (UAV can offer cost-efficient as well as near-real time analysis of grasslands with high temporal and spatial resolution. The potential of RGB imagery-based vegetation indices (VI from consumer grade cameras mounted on UAVs has been explored recently in several. However, for multitemporal analyses it is desirable to calibrate the digital numbers (DN of RGB-images to physical units. In this study, we explored the comparability of the RGBVI from a consumer grade camera mounted on a low-cost UAV to well established vegetation indices from hyperspectral field measurements for applications in grassland. The study was conducted in 2014 on the Rengen Grassland Experiment (RGE in Germany. Image DN values were calibrated into reflectance by using the Empirical Line Method (Smith & Milton 1999. Depending on sampling date and VI the correlation between the UAV-based RGBVI and VIs such as the NDVI resulted in varying R2 values from no correlation to up to 0.9. These results indicate, that calibrated RGB-based VIs have the potential to support or substitute hyperspectral field measurements to facilitate management decisions on grasslands.

  16. Dutch experience of monitoring euthanasia

    OpenAIRE

    Onwuteaka-Philipsen, Bregje D.; van der Heide, Agnes; Muller, Martien T; Rurup, Mette; Rietjens, Judith A.C.; Georges, Jean-Jacques; Vrakking, Astrid M; Cuperus-Bosma, Jacqueline M; van der Wal, Gerrit; van der Maas, Paul J

    2005-01-01

    Doctors in the United Kingdom can accompany their patients every step of the way, up until the last. The law stops them helping their patients take the final step, even if that is the patient's fervent wish. Next month's debate in the House of Lords could begin the process of changing the law. To help doctors decide where they stand we publish a range of opinions

  17. Monitoring and modelling of thermo-hydro-mechanical processes - main results of a heater experiment at the Mont Terri underground rock laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Ingeborg, G.; Alheid, H.J. [BGR - Federal Institute for Geosciences and Natural Resources, Hannover (Germany); Jockwerz, N. [Gesellschaft fur Anlagen- und Reaktorsicherheit (GRS) - Final Repository Research Division, Braunschweig (Germany); Mayor, J.C. [ENRESA - Empresa Nacional des Residuos Radioactivos, Madrid (Spain); Garcia-Siner, J.L. [AITEMIN -Asociacion para la Investigacion y Desarrollo Industrial de los Recursos Naturales, Madrid, (Spain); Alonso, E. [CIMNE - Centre Internacional de Metodos Numerics en Ingenyeria, UPC, Barcelona (Spain); Weber, H.P. [NAGRA - National Cooperative for the Disposal of Radioactive Waste, Wettingen (Switzerland); Plotze, M. [ETHZ - Swiss Federal Institute of Technology Zurich, IGT, Zurich, (Switzerland); Klubertanz, G. [COLENCO Power Engineering Ltd., Baden (Switzerland)

    2005-07-01

    The long-term safety of permanent underground repositories relies on a combination of engineered and geological barriers, so that the interactions between the barriers in response to conditions expected in a high-level waste repository need to be identified and fully understood. Co-financed by the European Community, a heater experiment was realized on a pilot plant scale at the underground laboratory in Mont Terri, Switzerland. The experiment was accompanied by an extensive programme of continuous monitoring, experimental investigations on-site as well as in laboratories, and numerical modelling of the coupled thermo-hydro-mechanical processes. Heat-producing waste was simulated by a heater element of 10 cm diameter, held at a constant surface temperature of 100 C. The heater element (length 2 m) operated in a vertical borehole of 7 m depth at 4 to 6 m depth. It was embedded in a geotechnical barrier of pre-compacted bentonite blocks (outer diameter 30 cm) that were irrigated for 35 months before the heating phase (duration 18 months) began. The host rock is a highly consolidated stiff Jurassic clay stone (Opalinus Clay). After the heating phase, the vicinity of the heater element was explored by seismic, hydraulic, and geotechnical tests to investigate if the heating had induced changes in the Opalinus Clay. Additionally, rock mechanic specimens were tested in the laboratory. Finally, the experiment was dismantled to provide laboratory specimens of post - heating buffer and host rock material. The bentonite blocks were thoroughly wetted at the time of the dismantling. The volume increase amounted to 5 to 9% and was thus below the bentonite potential. Geo-electrical measurements showed no decrease of the water content in the vicinity of the heater during the heating phase. Decreasing energy input to the heater element over time suggests hence, that the bentonite dried leading to a decrease of its thermal conductivity. Gas release during the heating period occurred

  18. Development and Certification of Station Development Test Objective (SDTO) Experiment # 15012-U, "Near RealTime Water Quality Monitoring Demonstration for ISS Biocides Using Colorimetric Solid Phase Extraction (CSPE)"

    Science.gov (United States)

    Gazda, Daniel B.; Nolan, Daniel J.; Rutz, Jeffrey A.; Shcultz, John R.; Siperko, Lorraine M.; Porter, Marc D,; Lipert, Robert J.; Limardo, Jose G.; McCoy, J. Torin

    2009-01-01

    Scientists and engineers from the Wyle Integrated Science and Engineering Group are working with researchers at the University of Utah and Iowa State University to develop and certify an experimental water quality monitoring kit based on Colorimetric Solid Phase Extraction (CSPE). The kit will be launched as a Station Development Test Objective (SDTO) experiment and evaluated on the International Space Station (ISS) to determine the acceptability of CSPE technology for routine inflight water quality monitoring. Iodine and silver, the biocides used in the US and Russian on-orbit water systems, will serve as test analytes for the technology evaluation. This manuscript provides an overview of the CSPE SDTO experiment and details the development and certification of the experimental water quality monitoring kit. Initial results from reagent and standard solution stability testing and environmental testing performed on the kit hardware are also reported.

  19. Development and Certification of Station Development Test Objective (SDTO) Experiment # 15012-U, "Near RealTime Water Quality Monitoring Demonstration for ISS Biocides Using Colorimetric Solid Phase Extraction (CSPE)"

    Science.gov (United States)

    Gazda, Daniel B.; Nolan, Daniel J.; Rutz, Jeffrey A.; Shcultz, John R.; Siperko, Lorraine M.; Porter, Marc D,; Lipert, Robert J.; Limardo, Jose G.; McCoy, J. Torin

    2009-01-01

    Scientists and engineers from the Wyle Integrated Science and Engineering Group are working with researchers at the University of Utah and Iowa State University to develop and certify an experimental water quality monitoring kit based on Colorimetric Solid Phase Extraction (CSPE). The kit will be launched as a Station Development Test Objective (SDTO) experiment and evaluated on the International Space Station (ISS) to determine the acceptability of CSPE technology for routine inflight water quality monitoring. Iodine and silver, the biocides used in the US and Russian on-orbit water systems, will serve as test analytes for the technology evaluation. This manuscript provides an overview of the CSPE SDTO experiment and details the development and certification of the experimental water quality monitoring kit. Initial results from reagent and standard solution stability testing and environmental testing performed on the kit hardware are also reported.

  20. Satellite SAR imagery for site discovery, change detection and monitoring activities in cultural heritage sites: experiments on the Nasca region, Peru

    Science.gov (United States)

    Tapete, D.; Cigna, F.; Masini, N.; Lasaponara, R.

    2012-04-01

    Besides their suitability for multi-temporal and spatial deformation analysis, the Synthetic Aperture Radar (SAR) image archives acquired by space-borne radar sensors can be exploited to support archaeological investigations over huge sites, even those partially or totally buried and still to be excavated. Amplitude information is one of the main properties of SAR data from which it is possible to retrieve evidences of buried structures, using feature extraction and texture analysis. Multi-temporality allows the reconstruction of past and recent evolution of both landscape and built-up environment, with the possibility to detect natural and/or anthropogenic changes, including human-induced damages to the conservation of cultural heritage. We present the methodology and first results of the experiments currently undertaken using SAR data in the Nasca region (Southern Peru), where two important civilizations such as Paracas and Nasca developed and flourished from 4th century BC to the 6th century AD. The study areas include a wide spectrum of archaeological and environmental elements to be preserved, among which: the archaeological site of Cahuachi and its surroundings, considered the largest adobe Ceremonial Centre in the World; the Nasca lines and geoglyphs in the areas of Palpa, Atarco and Nasca; the ancient networks of aqueducts and drainage galleries in the Puquios area, built by Nasca in the 1st-6th centuries AD. Archaeological prospection and multi-purpose remote sensing activities are currently carried out in the framework of the Italian mission of heritage Conservation and Archaeogeophysics (ITACA), with the direct involvement of researchers from the Institute for Archaeological and Monumental Heritage and the Institute of Methodologies for Environmental Analysis, Italian National Research Council. In this context, C- and L-band SAR images covering the Nasca region since 2001 were identified for the purposes of this research and, in particular, the following

  1. Monitoring glaciers and indications of subglacial volcanic activity using small-scale Top-Hat reflectors - An IsViews experiment on Myrdalsjökull, Iceland

    Science.gov (United States)

    Minet, Christian; Duque Biarge, Sergi; Jaenicke, Julia; Münzer, Ulrich; Mayer, Christoph; Franke, Jonas; Guðmundsson, Águst; Parizzi, Alessandro; Fritz, Thomas; Eineder, Michael

    2014-05-01

    Subglacial volcanic eruptions often provide indications of activity some time before the actual catastrophic event. Surface undulations appear on top of the ice cap and meltwater torrents can occur at the glacier margin. Even large scale uplifts of ice caps have been observed. Within the project IsViews a processing chain, based on high spatially and temporally resolved remote sensing imagery, will be developed in order to automatically identify such early indications. The main data used for this analysis are acquired by the TerraSAR-X, TanDEM-X and RapidEye satellites. First investigations concerning the feasibility of the near real-time warning system and the general baseline conditions are carried out on two large plateau glaciers in southern Iceland, namely Mördalsjökull and Vatnajökull. Within the 2013 IsViews field work an experiment was started in order to test a new way of glacier monitoring. Two test sites were established on the Mördalsjökull ice cap (one at the equilibrium line and one below), each consisting of a permanent GPS station and two nearby RADAR reflectors. These RADAR reflectors are specially designed Top-Hat reflectors, which are cheap to manufacture, small (50 cm diameter) and lightweight and therefore easy to handle, transport and deploy. Their special design makes them visible in SAR images independent of orientation, so different acquisition geometries and even different sensors can be used. The drawback of the small, low reflecting Top-Hat can be overcome by using the newly implemented Staring Spotlight Mode of the German SAR Satellite TerraSAR-X, providing an unprecedented resolution of down to 20 cm in the azimuth direction. The reflectors, as point targets, allow absolute positioning within the cm-level in the TerraSAR-X data. Time series of SAR data can be used to derive position and altitude changes of the reflector itself and possibly even melting rates by exploiting the different signal paths. The visibility of the Top

  2. External individual monitoring: experiments and simulations using Monte Carlo Method; Monitoracao individual externa: experimentos e simulacoes com o metodo de Monte Carlo

    Energy Technology Data Exchange (ETDEWEB)

    Guimaraes, Carla da Costa

    2005-07-01

    In this work, we have evaluated the possibility of applying the Monte Carlo simulation technique in photon dosimetry of external individual monitoring. The GEANT4 toolkit was employed to simulate experiments with radiation monitors containing TLD-100 and CaF{sub 2}:NaCl thermoluminescent detectors. As a first step, X ray spectra were generated impinging electrons on a tungsten target. Then, the produced photon beam was filtered in a beryllium window and additional filters to obtain the radiation with desired qualities. This procedure, used to simulate radiation fields produced by a X ray tube, was validated by comparing characteristics such as half value layer, which was also experimentally measured, mean photon energy and the spectral resolution of simulated spectra with that of reference spectra established by international standards. In the construction of thermoluminescent dosimeter, two approaches for improvements have. been introduced. The first one was the inclusion of 6% of air in the composition of the CaF{sub 2}:NaCl detector due to the difference between measured and calculated values of its density. Also, comparison between simulated and experimental results showed that the self-attenuation of emitted light in the readout process of the fluorite dosimeter must be taken into account. Then, in the second approach, the light attenuation coefficient of CaF{sub 2}:NaCl compound estimated by simulation to be 2,20(25) mm{sup -1} was introduced. Conversion coefficients C{sub p} from air kerma to personal dose equivalent were calculated using a slab water phantom with polymethyl-metacrilate (PMMA) walls, for reference narrow and wide X ray spectrum series [ISO 4037-1], and also for the wide spectra implanted and used in routine at Laboratorio de Dosimetria. Simulations of backscattered radiations by PMMA slab water phantom and slab phantom of ICRU tissue-equivalent material produced very similar results. Therefore, the PMMA slab water phantom that can be easily

  3. Nepal Ambient Monitoring and Source Testing Experiment (NAMaSTE): Emissions of particulate matter from garbage burning, wood and dung cooking fires, motorcycles and brick kilns

    Science.gov (United States)

    Jayarathne, T. S.; Rathnayake, C.; Stockwell, C.; Daugherty, K.; Islam, R. M.; Christian, T. J.; Bhave, P.; Praveen, P. S.; Panday, A. K.; Adhikari, S.; Rasmi, M.; Goetz, D.; DeCarlo, P. F.; Saikawa, E.; Yokelson, R. J.; Stone, E. A.

    2016-12-01

    The Nepal Ambient Monitoring and Source Testing Experiment (NAMASTE) field campaign targeted the in-situ characterization of widespread and under-sampled combustion sources in South Asia by determining emission factors (EF) for fine particulate matter (PM2.5), organic carbon (OC), elemental carbon, inorganic ions, trace metals, and organic species. Garbage burning had the highest EF PM2.5 among the sampled sources ranging 7-124 g kg-1, with maximum EFs for garbage burned under higher moisture conditions. Garbage burning emissions contained high concentrations of polycyclic aromatic compounds (PAHs) and heavy metals (Pb, Cd, Zn) that are associated with acute and chronic health effects. Triphenylbenzene and antimony (Sb) were unique to garbage burning are good candidates for tracing this source. Cook stove emissions varied largely by stove technology (traditional mud stove, 3-stone cooking fire, chimney stove, etc.) and biomass fuel (dung, hardwood, twigs, and mixtures thereof). Burning dung consistently emitted more PM2.5 than burning wood and contained characteristic fecal sterols and stanols. Motorcycle emissions were evaluated before and after servicing, which decreased EF PM2.5 from 8.8 g kg-1 to 0.7 g kg-1. Organic species analysis indicated that this reduction in PM2.5­ is largely due to a decrease in emission of motor oil. For brick kilns, the forced draft zig-zag kilns had higher EF PM2.5 (12-19 g kg-1) compared to clamp kilns (8-13 g kg-1) and also exhibited chemical differences. PM2.5 emitted from the zig-zag kiln were mainly OC (7%), sulfate (32%) and uncharacterized chemical components (60%), while clamp kiln emissions were dominated by OC (64%) and ammonium sulfate (36%). The quantitative emission factors developed in this study may be used for source apportionment and to update regional emission inventories.

  4. Strategic Tutor Monitoring.

    Science.gov (United States)

    Chee-kwong, Kenneth Chao

    1996-01-01

    Discusses effective tutor monitoring strategies based on experiences at the Open Learning Institute of Hong Kong. Highlights include key performance and strategic control points; situational factors, including tutor expectations and relevant culture; Theory X versus Theory Y leadership theories; and monitoring relationships with tutors. (LRW)

  5. Strategic Tutor Monitoring.

    Science.gov (United States)

    Chee-kwong, Kenneth Chao

    1996-01-01

    Discusses effective tutor monitoring strategies based on experiences at the Open Learning Institute of Hong Kong. Highlights include key performance and strategic control points; situational factors, including tutor expectations and relevant culture; Theory X versus Theory Y leadership theories; and monitoring relationships with tutors. (LRW)

  6. Monitoring, field experiments, and geochemical modeling of Fe(II) oxidation kinetics in a stream dominated by net-alkaline coal-mine drainage, Pennsylvania, USA

    Science.gov (United States)

    Cravotta, Charles A.

    2015-01-01

    Watershed-scale monitoring, field aeration experiments, and geochemical equilibrium and kinetic modeling were conducted to evaluate interdependent changes in pH, dissolved CO2, O2, and Fe(II) concentrations that typically take place downstream of net-alkaline, circumneutral coal-mine drainage (CMD) outfalls and during aerobic treatment of such CMD. The kinetic modeling approach, using PHREEQC, accurately simulates observed variations in pH, Fe(II) oxidation, alkalinity consumption, and associated dissolved gas concentrations during transport downstream of the CMD outfalls (natural attenuation) and during 6-h batch aeration tests on the CMD using bubble diffusers (enhanced attenuation). The batch aeration experiments demonstrated that aeration promoted CO2 outgassing, thereby increasing pH and the rate of Fe(II) oxidation. The rate of Fe(II) oxidation was accurately estimated by the abiotic homogeneous oxidation rate law −d[Fe(II)]/dt = k1·[O2]·[H+]−2·[Fe(II)] that indicates an increase in pH by 1 unit at pH 5–8 and at constant dissolved O2 (DO) concentration results in a 100-fold increase in the rate of Fe(II) oxidation. Adjusting for sample temperature, a narrow range of values for the apparent homogeneous Fe(II) oxidation rate constant (k1′) of 0.5–1.7 times the reference value of k1 = 3 × 10−12 mol/L/min (for pH 5–8 and 20 °C), reported by Stumm and Morgan (1996), was indicated by the calibrated models for the 5-km stream reach below the CMD outfalls and the aerated CMD. The rates of CO2 outgassing and O2ingassing in the model were estimated with first-order asymptotic functions, whereby the driving force is the gradient of the dissolved gas concentration relative to equilibrium with the ambient atmosphere. Although the progressive increase in DO concentration to saturation could be accurately modeled as a kinetic function for the conditions evaluated, the simulation of DO as an instantaneous equilibrium process did not affect the

  7. Use of borehole radar reflection logging to monitor steam-enhanced remediation in fractured limestone-results of numerical modelling and a field experiment

    Science.gov (United States)

    Gregoire, C.; Joesten, P.K.; Lane, J.W.

    2006-01-01

    Ground penetrating radar is an efficient geophysical method for the detection and location of fractures and fracture zones in electrically resistive rocks. In this study, the use of down-hole (borehole) radar reflection logs to monitor the injection of steam in fractured rocks was tested as part of a field-scale, steam-enhanced remediation pilot study conducted at a fractured limestone quarry contaminated with chlorinated hydrocarbons at the former Loring Air Force Base, Limestone, Maine, USA. In support of the pilot study, borehole radar reflection logs were collected three times (before, during, and near the end of steam injection) using broadband 100 MHz electric dipole antennas. Numerical modelling was performed to predict the effect of heating on radar-frequency electromagnetic (EM) wave velocity, attenuation, and fracture reflectivity. The modelling results indicate that EM wave velocity and attenuation change substantially if heating increases the electrical conductivity of the limestone matrix. Furthermore, the net effect of heat-induced variations in fracture-fluid dielectric properties on average medium velocity is insignificant because the expected total fracture porosity is low. In contrast, changes in fracture fluid electrical conductivity can have a significant effect on EM wave attenuation and fracture reflectivity. Total replacement of water by steam in a fracture decreases fracture reflectivity of a factor of 10 and induces a change in reflected wave polarity. Based on the numerical modelling results, a reflection amplitude analysis method was developed to delineate fractures where steam has displaced water. Radar reflection logs collected during the three acquisition periods were analysed in the frequency domain to determine if steam had replaced water in the fractures (after normalizing the logs to compensate for differences in antenna performance between logging runs). Analysis of the radar reflection logs from a borehole where the temperature

  8. Large Area Crop Inventory Experiment (LACIE). Detecting and monitoring agricultural vegetative water stress over large areas using LANDSAT digital data. [Great Plains

    Science.gov (United States)

    Thompson, D. R.; Wehmanen, O. A. (Principal Investigator)

    1978-01-01

    The author has identified the following significant results. The Green Number Index technique which uses LANDSAT digital data from 5X6 nautical mile sampling frames was expanded to evaluate its usefulness in detecting and monitoring vegetative water stress over the Great Plains. At known growth stages for wheat, segments were classified as drought or non drought. Good agreement was found between the 18 day remotely sensed data and a weekly ground-based crop moisture index. Operational monitoring of the 1977 U.S.S.R. and Australian wheat crops indicated drought conditions. Drought isoline maps produced by the Green Number Index technique were in good agreement with conventional sources.

  9. Nursing experience of the dynamic blood sugar monitoring%动态血糖监测的护理干预体会

    Institute of Scientific and Technical Information of China (English)

    胡东霞

    2014-01-01

    Purpose: LeiLan dynamic glucose monitoring system (CGMS) monitor blood sugar with the changing rule in order to guide the doctor and provide evidence for reasonable and individualized treatment plan.Methods: Choosing 85 cases of diabetic patients apply to LeiLan dynamic blood sugar monitoring system in nursing intervention in October 2012 to July 2013 to our department in the hospital for monitoring blood sugar.Results: In addition to the needles out in 2 cases and the alarm make 6 times,the patients were successful y completed dynamic blood sugar monitoring, data consistent with il ness can be guided clinical treatment.Conclusion: The application and importance of dynamic blood sugar monitoring,we strengthen the application of dynamic nursing intervention in patients with blood glucose monitoring system, is to guarantee the smooth completion of dynamic glucose monitoring in patients with important factors, is to provide guarantee for clinicians better diagnosis and treatment of diseases.%目的:通过雷兰动态血糖监测(CGMS)系统监测血糖了解血糖变化规律,为指导医生制定合理化、个体化的治疗方案提供依据。方法:选择2012年10月至2013年7月来我科住院的85例糖尿病病人进行雷兰动态血糖监测系统监测血糖护理干预。结果:除针头脱出2例,报警6次外,患者均顺利完成动态血糖监测,数据与病情相符,能指导临床治疗;结论:动态血糖监测仪的应用及其重要,加强对应用动态血糖监测系统患者的护理干预,是保证患者顺利完成动态血糖监测的重要因素,为临床医生更好的诊治疾病提供保证。

  10. Understanding the Long-Term Spectral Variability of Cygnus X-1 with Burst and Transient Source Experiment and All-Sky Monitor Observations

    Science.gov (United States)

    Zdziarski, Andrzej A.; Poutanen, Juri; Paciesas, William S.; Wen, Lin-Qing

    2002-01-01

    We present a comprehensive analysis of all observations of Cyg X-1 by the Compton Gamma Ray Observatory Burst and Transient Source Experiment (BATSE; 20-300 keV) and by the Rossi X-Ray Timing Explorer all-sky monitor (ASM; 1.5-12 keV) until 2002 June, including approximately 1200 days of simultaneous data. We find a number of correlations between fluxes and hardnesses in different energy bands. In the hard (low) spectral state, there is a negative correlation between the ASM 1.5-12 keV flux and the hardness at any energy. In the soft (high) spectral state, the ASM flux is positively correlated with the ASM hardness but uncorrelated with the BATSE hardness. In both spectral states, the BATSE hardness correlates with the flux above 100 keV, while it shows no correlation with the 20-100 keV flux. At the same time, there is clear correlation between the BATSE fluxes below and above 100 keV. In the hard state, most of the variability can be explained by softening the overall spectrum with a pivot at approximately 50 keV. There is also another, independent variability pattern of lower amplitude where the spectral shape does not change when the luminosity changes. In the soft state, the variability is mostly caused by a variable hard (Comptonized) spectral component of a constant shape superposed on a constant soft blackbody component. These variability patterns are in agreement with the dependencies of the rms variability on the photon energy in the two states. We also study in detail recent soft states from late 2000 until 2002. The last of them has lasted thus far for more than 200 days. Their spectra are generally harder in the 1.5-5 keV band and similar or softer in the 3-12 keV band than the spectra of the 1996 soft state, whereas the rms variability is stronger in all the ASM bands. On the other hand, the 1994 soft state transition observed by BATSE appears very similar to the 1996 one. We interpret the variability patterns in terms of theoretical Comptonization

  11. Internet-based monitoring of influenza-like illness in the general population: experience of five influenza seasons in the Netherlands.

    NARCIS (Netherlands)

    Friesema, I.H.M.; Koppeschaar, C.E.; Donker, G.A.; Dijkstra, F.; Noort, S.P. van; Smallenburg, R.; Hoek, W. van der; Sande, M.A.B. van der

    2009-01-01

    Like in most other countries, influenza surveillance in The Netherlands is based upon influenza-like illness (ILI) consultations reported by sentinel general practitioners (GP). In addition, an internet-based monitoring of ILI in the general population started in 2003/2004 (Great Influenza Survey (G

  12. Experiments and FLUKA simulations of $^{12}C$ and $^{16}O$ beams for therapy monitoring by means of in-beam Positron Emission Tomography

    CERN Document Server

    Sommerer,; Ferrari, A

    2007-01-01

    Since 1997 at the experimental C-12 ion therapy facility at Gesellschaft fuer Schwerionenforschung (GSI), Darmstadt, Germany, more than 350 patients have been treated. The therapy is monitored with a dedicated positron emission tomograph, fully integrated into the treatment site. The measured beta+-activity arises from inelastic nuclear interactions between the beam particles an the nuclei of the patients tissue. Because the monitoring is done during the irradiation the method is called in-beam PET. The underlying principle of this monitoring is a comparison between the measured activity and a simulated one. The simulations are presently done by the PETSIM code which is dedicated to C-12 beams. In future ion therapy centers like the Heidelberger Ionenstrahl Therapiezentrum (HIT), Heidelberg, Germany, besides C-12 also proton, $^3$He and O-16 beams will be used for treatment and the therapy will be monitored by means of in-beam PET. Because PETSIM is not extendable to other ions in an easy way, a code capable ...

  13. MONITORING MYCOTOXIN PRODUCTION AT THE GENETIC LEVEL ON VARIOUS GROWTH SUBSTRATES USING QUANTITATIVE REVERSE TRANSCRIPTION POLYMERASE CHAIN REACTION?EXPERIMENT DESIGN

    Science.gov (United States)

    The paper describes a method of analyzing the production of mycotoxins at the genetic level by monitoring the intracellular levels of messenger RNA (mRNA). Initial work will focus on threshing out the mycotoxin gene clusters in Stachybotrys chartarum followed by analysis of toxin...

  14. Medical application and clinical validation for reliable and trustworthy physiological monitoring using functional textile: experience from the HeartCycle and MyHeart project

    NARCIS (Netherlands)

    Reiter, H.; Muehlsteff, J.; Sipila. A

    2012-01-01

    Functional textiles are seen as promising technology to enable healthcare services and medical care outside hospitals due to their ability to integrate textile-based sensing and monitoring technologies into the daily life. In the past much effort has been spent onto basicfunctional textile research

  15. MONITORING MYCOTOXIN PRODUCTION AT THE GENETIC LEVEL ON VARIOUS GROWTH SUBSTRATES USING QUANTITATIVE REVERSE TRANSCRIPTION POLYMERASE CHAIN REACTION?EXPERIMENT DESIGN

    Science.gov (United States)

    The paper describes a method of analyzing the production of mycotoxins at the genetic level by monitoring the intracellular levels of messenger RNA (mRNA). Initial work will focus on threshing out the mycotoxin gene clusters in Stachybotrys chartarum followed by analysis of toxin...

  16. Experiment Dashboard for the LHC Experiments

    CERN Document Server

    Andreeva, Julia; Gaidioz, Benjamin; Herrala, Juha; Maier, Gerhild; Rocha, Ricardo; Saiz, Pablo; Sidorova, Irina; CERN. Geneva. IT Department

    2007-01-01

    The goal of the Grid is to provide a coherent access to distributed computing resources. All LHC experiments are using several Grid infrastructures and a variety of the middleware flavors. Due to the complexity and heterogeinity of a distributed system the monitoring represents a challenging task. Independently of the underlying platform , the experiments need to ave a complete and uniform picture of their activities on the Grid ideally seen by the users as a single powerful computing resource. Overall operation of the infrastructure used by experiments is defined both by the quality of the Grid and the quality of the tools and services developed/used by the experiments. Correspondingly the required monitoring information should combine both Grid-related and experiment/application specific data. On the other hand, users of the LHC experiments have various roles and need different levels of details regarding monitoring data. The paper will focus on the Grid monitoring from the experiment/user perspectives with...

  17. Proceedings of Propulsion and Energetics Panel Symposium (71st) on Engine Condition Monitoring - Technology and Experience Held in Quebec City, Canada on 30 May-3 Jun 1988

    Science.gov (United States)

    1988-06-03

    PUBLICATIONS OF PEP iln THEME v PROPULSION AND ENERGETICS PANEL Reference SESSION I - MILITARY OPERATIONS OPERATIONAL REQUIREMENTS FOR ENGINE CONDITION...development of an on-board Loads and Engine Health Monitor (LEAN) for the CF5 air- craft. This system will include both EBM and structural condition...Highlights of the theme include application areas and the economic aspects of everyday airline operation. The ECM information system supports

  18. Monitoring of returnees from Ebola-affected areas: lessons learned based on the experience of French armed forces deployed in Guinea, 2015.

    Science.gov (United States)

    Manet, Ghislain; Bédubourg, Gabriel; Velut, Guillaume; de Laval, Franck; Mayet, Aurélie; Dia, Aissata; Berger, Franck; Quentin, Benoît; Meynard, Jean-Baptiste; Michel, Rémy; Duron, Sandrine

    2017-08-31

    During the 2014-15 Ebola virus disease (EVD) outbreak in West Africa, French armed forces were involved in the treatment and management of Ebola patients in Guinea. The constant flow of military personnel returning from their deployment posed a risk of secondary dissemination of the Ebola virus. Our objective was to describe the follow-up of returning service members that was implemented to prevent this risk of dissemination in France. For the French military, a specific complementary follow-up was added to the national monitoring to take into account the need for a detailed record for follow-up of returning military personnel and to keep the military chain of command informed. All the 410 service members deployed in Guinea underwent monitoring among whom 22 were suspected of EVD. Three of them were considered as possible EVD cases but none of them was tested positive for EVD. The monitoring organized for French service members deployed in Guinea made it possible to follow all exposed military personnel after their return, know their health status on a near real-time basis and be aware of all alerts. To reach this goal the collaboration with French national health agencies was necessary and should be improved in the future.

  19. A summary of the test procedures and operational details of a Delaware River and an ocean dumping pollution monitoring experiment conducted 28 August 1975

    Science.gov (United States)

    Hypes, W. D.; Ohlhorst, C. W.

    1977-01-01

    Two remote sensor evaluation experiments are discussed. One experiment was conducted at the DuPont acid-dump site off the Delaware coast. The second was conducted at an organic waste outfall in the Delaware River. The operational objective of obtaining simultaneous sea truth sampling with remote sensors overpasses was met. Descriptions of the test sites, sensors, sensor platforms, flight lines, sea truth data collected, and operational chronology are presented.

  20. MRI monitoring before, during, and after interstitial laser-induced thermotheraphy of benign prostatic hyperplasia. First clinical experience; MRT-Monitoring vor, waehrend und nach der interstitiellen laserinduzierten Thermotherapie der benignen Prostatahyperplasie. Erste klinische Erfahrungen

    Energy Technology Data Exchange (ETDEWEB)

    Mueller-Lisse, G.U. [Inst. fuer Radiologische Diagnostik, Klinikum Grosshadern, Ludwig-Maximilians-Universitaet, Muenchen (Germany)]|[Klinik und Poliklinik fuer Urologie, Klinikum Grosshadern, Ludwig-Maximilians-Universitaet, Muenchen (Germany); Heuck, A. [Inst. fuer Radiologische Diagnostik, Klinikum Grosshadern, Ludwig-Maximilians-Universitaet, Muenchen (Germany); Stehling, M.K. [Inst. fuer Radiologische Diagnostik, Klinikum Grosshadern, Ludwig-Maximilians-Universitaet, Muenchen (Germany); Frimberger, M. [Inst. fuer Radiologische Diagnostik, Klinikum Grosshadern, Ludwig-Maximilians-Universitaet, Muenchen (Germany); Thoma, M. [Inst. fuer Radiologische Diagnostik, Klinikum Grosshadern, Ludwig-Maximilians-Universitaet, Muenchen (Germany); Schneede, P. [Klinik und Poliklinik fuer Urologie, Klinikum Grosshadern, Ludwig-Maximilians-Universitaet, Muenchen (Germany); Muschter, R. [Klinik und Poliklinik fuer Urologie, Klinikum Grosshadern, Ludwig-Maximilians-Universitaet, Muenchen (Germany); Hofstetter, A. [Klinik und Poliklinik fuer Urologie, Klinikum Grosshadern, Ludwig-Maximilians-Universitaet, Muenchen (Germany); Reiser, M. [Inst. fuer Radiologische Diagnostik, Klinikum Grosshadern, Ludwig-Maximilians-Universitaet, Muenchen (Germany)

    1996-09-01

    Ten patients with symptomatic BPH had MRI examinations of the prostate 48 h before and after LITT. Online monitoring with MRI at 1.5 T of interstitial Nd:YAG laser energy deposition in the prostate was performed in two patients, repeating a T1-weighted FLASH sequence (TR 100 ms, TE 5 ms, flip angle 90 ) every 20 s. Follow-up MRI examinations 2-3 weeks, 6-8 weeks, and 6-12 months after LITT were carried out in eight patients, using T2-weighted FSE images and contrast-enhanced T1-weighted SE images. The prostate was well delineated in all patients on T2-weighted FSE images, with a rather homogeneous peripheral gland and an inhomogeneous central gland. Volume measurements yielded reproducibilities of 3.2%-4.7%. Signal intensity in the FLASH sequence decreased during LITT, both in the prostate in vivo and in specimens of bovine prostate and seminal vesicles in vitro, with signal developments running in parallel. Areas of energy deposition and signal alteration were not sharply delineated. The latter margin of the laser-induced lesions could not be predicted from the FLASH images, while the tip of the laser fibre was easily recognized. Contrast-enhanced T1-weighted MR images immediately after LITT clearly demarcated low signal intensity surrounding prostate tissue. Follow-up examinations showed a decrease of 20% of prostate volume over a period of 6-12 monts after LITT. Correlation between prostate volume development and lesion volume alteration was 0.85-0.90 (P=0.002-0.007) at all follow-up times. MRI allows rather precise recognition of intraprostatic alterations after LITT, including volume changes over a period of up to 1 year after therapy that can be predicted immediately after LITT. While laser energy deposition in the prostate can be monitored by MRI with T1-weighted FLASH sequences as a function of temperature alteration, it is not possible to determine the lesion margins immediately from the FLASH images. (orig./VHE) [Deutsch] Die Magnetresonanztomographie

  1. Field experiments on application of a GPS displacement measurement system for monitoring large slope stabikity. 7th Report. Predictions and monitorings for rock development design; Chodai zanheki no anzen kanshi eno GPS hen`i keisoku system no oyo ni kansuru genba jikken. 7. Ganban kaihatsu sekkei no tameno yosoku to monitaringu

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, N.; Mizuta, Y. [Yamaguchi Univ., Yamaguchi (Japan). Faculty of Engineering; Kondo, H. [Furuno Electric Co. Ltd., Hyogo (Japan); Ono, H.

    1996-05-25

    In a mine in which large-scale excavation is put forward, large slopes are made due to long-term development drilling. A method of controlling an average angle of such slopes within a set range has been employed as a method of controlling the safety of the slopes. This study has been conducted with a final object of developing a displacement monitoring system, which is used to monitor the safety of large slopes. As a first step of this study, basic experiments for examining the adaptability of a ground displacement monitoring system based on GPS (Global Positioning System) were conducted. The main finding obtained is as follows. The results of a displacement measurement simulation experiment show that the accuracy of displacement measurement using six receiving satellites is substantially equal to that of the measurement using a total station of 1{double_prime} reading. The accuracy of the displacement measurement relates to the number and arrangement of the receiving satellites. When, especially, vertical displacement measurement is conducted with a small number of receiving satellites, care must be taken so as to prevent a decrease in the measurement accuracy. 19 refs., 11 figs., 1 tab.

  2. Rice Crop Monitoring and Yield Estimation Through Cosmo Skymed and TerraSAR-X: A SAR-Based Experience in India

    Science.gov (United States)

    Pazhanivelan, S.; Kannan, P.; Nirmala Mary, P. Christy; Subramanian, E.; Jeyaraman, S.; Nelson, A.; Setiyono, T.; Holecz, F.; Barbieri, M.; Yadav, M.

    2015-04-01

    Rice is the most important cereal crop governing food security in Asia. Reliable and regular information on the area under rice production is the basis of policy decisions related to imports, exports and prices which directly affect food security. Recent and planned launches of SAR sensors coupled with automated processing can provide sustainable solutions to the challenges on mapping and monitoring rice systems. High resolution (3m) Synthetic Aperture Radar (SAR) imageries were used to map and monitor rice growing areas in selected three sites in TamilNadu, India to determine rice cropping extent, track rice growth and estimate yields. A simple, robust, rule-based classification for mapping rice area with multi-temporal, X-band, HH polarized SAR imagery from COSMO Skymed and TerraSAR X and site specific parameters were used. The robustness of the approach is demonstrated on a very large dataset involving 30 images across 3 footprints obtained during 2013-14. A total of 318 in-season site visits were conducted across 60 monitoring locations for rice classification and 432 field observations were made for accuracy assessment. Rice area and Start of Season (SoS) maps were generated with classification accuracies ranging from 87- 92 per cent. Using ORYZA2000, a weather driven process based crop growth simulation model; yield estimates were made with the inclusion of rice crop parameters derived from the remote sensing products viz., seasonal rice area, SoS and backscatter time series. Yield Simulation accuracy levels of 87 per cent at district level and 85- 96 per cent at block level demonstrated the suitability of remote sensing products for policy decisions ensuring food security and reducing vulnerability of farmers in India.

  3. Study of the optical monitoring system of the scintillating crystal involved in the electromagnetic calorimeter of CMS experiment; Etude du systeme de suivi optique des cristaux scintillants du calorimetre electromagnetique de l`experience CMS

    Energy Technology Data Exchange (ETDEWEB)

    Geleoc, M

    1998-09-04

    The prospect of the experimental discovery of the Higgs boson is one of the motivations to build the large hadron collider (LHC). Proton beams will collide and the emitted particles will be detected by ATLAS and CMS equipment. In each detector the electromagnetic calorimeter will allow the characterisation of the 2 photons coming from one of the disintegration channels of the Higgs boson. CMS collaboration has chosen an homogeneous calorimeter fitted with PbWO{sub 4} crystals. Each crystal with its photodetector and its electronic device forms one detection channel. The resolution of the detection channels should not deteriorate all along the operating time. The optical monitoring system of the crystals logs then controls the response of each detection channel in order to allow an accurate calibration of the calorimeter. The optical properties, the resistance to irradiation of PbWO{sub 4} crystals and the modelling of light collection are investigated in this work. The description of the different components of the optical monitoring system highlights the technical difficulties we had to challenge. An experimental testing bench has been set up to study the coupling between the scintillation signal and the signal that feeds the monitoring system, this coupling has been studied under irradiation in the conditions of CMS operating. (A.C.) 94 refs.

  4. A Cherenkov-based Beam Loss Scintillator system for beam, background and online luminosity monitoring at the LHCb experiment at CERN

    CERN Document Server

    Alessio, F; Jacobsson, R

    2013-01-01

    The installation of a scintillator-based system in the LHCb cavern was initially proposed in order to observe injection problems around the LHCb interaction region. Thanks to the fact that LHCb had already developed a custom-made electronics board (BPIM) for the LHCb beam pickups and global LHCb timing monitoring, a complete, inexpensive but flexible and robust system was quickly developed and installed few cm from the beam pipe just in front of the LHCb VELO detector in time for the very first beams injected in the LHC. The current and final system – commonly referred to as Beam Loss Scintillator (BLS) system - ultimately played a central role in the fast beam, background and online luminosity monitoring at LHCb. In this paper, the features of the detector – based on quartz radiator and Cherenkov light - are described, including the functionalities that the system acquired during the proton-proton physics programmes in 2009- 2013 thanks to its flexibility, reliability and sensitivity to beam hal...

  5. LHCb: Beam and Background Monitoring and the Upgrade of the Timing and Fast Control System of the LHCb experiment at CERN

    CERN Document Server

    Alessio, F

    2009-01-01

    The LHCb experiment at CERN is preparing for first real data taking, foreseen by the end of the year 2009 with the start-up of the LHC. A large amount of work of commissioning, tests and improvements of the full detector has been done in order to optimize its performance. During my first year as a Doctoral Student at CERN, I have been working on the timing and readout control of the LHCb experiment in the frame of the LHCb Online group. The group is responsible for the full data acquisition of the LHCb experiment, from the Front-End Electronics (FEE) to the storage of the data for offline analysis, as well as the Timing and Fast Control (TFC) system. The latter controls and distributes centrally timing and trigger information, as well as synchronous and asynchronous commands to the readout system. It is also responsible for receiving and adjusting the bunch and orbit clocks of the LHC machine and distributing it to the electronics of the whole experiment. It is of vital importance to assure that the timing o...

  6. Design of experiments-based monitoring of critical quality attributes for the spray-drying process of insulin by NIR spectroscopy

    DEFF Research Database (Denmark)

    Maltesen, Morten Jonas; van de Weert, Marco; Grohganz, Holger

    2012-01-01

    Moisture content and aerodynamic particle size are critical quality attributes for spray-dried protein formulations. In this study, spray-dried insulin powders intended for pulmonary delivery were produced applying design of experiments methodology. Near infrared spectroscopy (NIR) in combination...

  7. [Drug monitoring in hospitals of Cordoba City (Argentina). 2-year-experience of the Pharmacological Department as a peripheric effect of ANMAT].

    Science.gov (United States)

    Segura, Aída E del V; Mutal, Víctor; Lizzio, Salvador; Montrull, Hilda L

    2005-01-01

    There were designed Monitorings study (FVG), centred on three Public Hospitals of C6rdoba, seeking to detect Adverse Reactions for medicines. To such purpose there were realized forming courses of human resources in FVG. FVG's cards were distributed, of own design, recovered then. For statistical calculation there was applied the INFO 4. 84 informed cards were recovered. The groups of involved medicines: they were: Antibiotics (22%), cardiovascular (16%), antiulcerous (10%), anxiolytics (8.75%), nonsteroidal anti-inflammatory (8%), onchologics (6%), anticonvulsants (3.75%), hypolypemics (3.5%), sexual hormones (2.5%), hypoglycemics (2.5%), plasmatic expansors (2.5%). The organs affected by RAM were: Central Nervous System (25%), skin (25%), gastrointestinal (17.5%), Bleeds (7.5%), cardiovascular (7.5%), respiratory (7%), immune (6%), renal (4%). The analysis of imputability indicated: Definite RAM: 10 % Probable RAM: 90%.

  8. SU-E-T-62: A Preliminary Experience of Using EPID Transit Dosimetry for Monitoring Daily Dose Variations in Radiation Treatment Delivery

    Energy Technology Data Exchange (ETDEWEB)

    Yao, R; Chisela, W [Columbus Regional Healthcare, Columbus, GA (United States)

    2015-06-15

    Purpose: To investigate the use of EPID transit dosimetry for monitoring daily dose variations in radiation treatment delivery. Methods: A patient with head and neck cancer treated using nine field IMRT beams was used in this study. The prescription was 45 Gy in 25 fractions. A KV CBCT was acquired before each treatment on a Varian NTX linear accelerator. Integrated images using MV EPID were acquired for each treatment beam. Planning CT images, treatment plan, and daily integrated images were imported into a commercial QA software Dosimetry Check (v4r4 Math Resolutions, LLC, Columbia, MD) to calculate 3D dose of the day assuming 25 fractions treatment. Planning CT images were deformed and registered to each daily CBCT using Varian SmartAdapt (v11.MR2). ROIs were then propagated from planning CT to daily CBCT. The correlation between maximum, average dose of ROIs and ROI volume, center of mass shift, Dice Similarity Coefficient (DSC) were investigated. Results: Not all parameters investigated showed strong correlations. For PTV and CTV, the average dose has inverse correlation with their volume change (correlation coefficient −0.52, −0.50, respectively) and DSC (−0.59, −0.59, respectively). The average dose of right parotid has correlation with its volume change (0.56). The maximum dose of spinal cord has correlation with the center of mass superior-inferior shift (0.52) and inverse correlation with the center of mass anterior-posterior shift (−0.73). Conclusion: Transit dosimetry using EPID images collected during treatment delivery offers great potential to monitor daily dose variations due to patient anatomy change, motion, and setup errors in radiation treatment delivery. It can provide a patient-specific QA tool valuable for adaptive radiation therapy. Further work is needed to validate the technique.

  9. 心内直视术后有创动脉血压监测护理%Nursing Experiences of Invasive Blood Pressure Monitoring for Patients Having Undergone Open-heart Surgery

    Institute of Scientific and Technical Information of China (English)

    程良平; 任燕; 张丽莉; 龚仁蓉

    2012-01-01

    Objective To summarize the nursing experiences of invasive blood pressure (IBP) monitoring for patients having undergone open-heart surgery. Methods We retrospectively analyzed the IBP monitoring processes for 634 patients who had undergone open-heart surgery from December 2009 to May 2010. Results In all the 634 cases, 3 had detached catheter, 2 had loose connection, 1 had detachment from the piezometer, and 2 had catheter obstruction. No complications like infection, hemorrhage, thrombosis or swelling of distal limb occurred. Conclusions, IBP monitoring is absolutely essential for hemodynamic monitoring after open-heart surgery. The focus of nursing is to keep the catheter clear, fixed, and prevent from infection, bleeding, thrombosis and swelling of distal limb.%目的 总结心内直视术后有创血压监测的护理经验.方法 回顾性分析2009年12月-2010年5月634例心内直视术后患者有创血压监测的护理过程.结果 除3例患者导管脱出,2例连接不紧密,1例与测压管脱开,2例导管堵塞外,其余均未发生感染、出血、栓塞及肢体远端肿胀等并发症.结论 有创血压监测是心内直视术后必不可少的监测方法,护理的重点是保持管道通畅、固定,预防感染、出血、栓塞及肢体远端肿胀.

  10. The Teaching Reformation of Environmental Monitoring Experiment Course in case of Wuyi University%环境监测实验课程的教学改革探讨--以武夷学院为例

    Institute of Scientific and Technical Information of China (English)

    叶宏萌; 陈培珍; 李灵

    2014-01-01

    通过剖析《环境监测实验》课程在武夷学院实际教学过程中的具体问题,提出相应的教学改革措施。文中主要建议以学生为主体的探讨式和任务式结合的教学方法,引入多媒体教学并注重实验过程考核,强化教学效果。最后结合课程特点强调融合工作过程导向进行职业技能培训,利用科研资源,建立科研、实地环境监测相结合的教学体系,进一步提高学生社会竞争力。对地方院校环境工程专业的环境监测实验教学具有重要的借鉴意义。%This paper surprised some corresponding teaching reform measures by analyzing the specific problems of "Environmental Monitoring Experiment" course in the actual teaching process in Wuyi University. It mainly recommended to students as the main ex-ploratory and mission-style combination of teaching methods, leaded into multimedia teaching and focused on experimental process as-sessment for strengthening teaching effectiveness. At the same time, it emphasized the course work process-oriented and vocational skills training, used the research resources and established scientific research and environmental monitoring to further enhance students' social competitiveness. All reform measures would have an important reference for environmental monitoring experiment course teaching in local institutions.

  11. Primary Exploration on Gas Chromatography Experimental Teaching in Environmental Monitoring Experiment%环境监测实验中气相色谱实验教学初探

    Institute of Scientific and Technical Information of China (English)

    邓晓燕; 冯昌

    2014-01-01

    在环境监测实验中尝试开设“土壤中多环芳烃的测定”气相色谱实验。土壤中多环芳烃利用二氯甲烷/丙酮溶剂超声萃取,萃取液经离心分离后蒸发浓缩、硅胶层析柱净化;然后建立GC-FID测定土壤中多环芳烃的分析方法,以及实验过程中的质量控制。实验的目的使学生掌握土壤样品的前处理方法和色谱参数的选择。%The gas chromatography ( GC) experiments on ‘gas chromatography determination of polycyclic aromatic hydrocarbons in soil'was tried to introduce in the environmental monitoring experiments.The polycyclic aromatic hydrocarbons ( PAHs ) in soil were extracted ultrasonically with a mixture of dichloromethane -acetone.After centrifugation, the extract was evaporated , concentrated and purified with chromatographic column with silica gel.A method was established to determine PAHs in soil with FID detector.The purposes of the experiment made the students master soil sample pretreatment techniques and select chromatographic parameters and quality control of GC experiments .

  12. Monitoring Microbially Influenced Corrosion

    DEFF Research Database (Denmark)

    Hilbert, Lisbeth Rischel

    Abstract Microbially influenced corrosion (MIC) of carbon steel may occur in media with microbiological activity of especially sulphate-reducing bacteria (SRB). The applicability and reliability of a number of corrosion monitoring techniques for monitoring MIC has been evaluated in experiments...... and diffusional effects and unreliable corrosion rates, when biofilm and ferrous sulphide corrosion products cover the steel surface. Corrosion rates can be overestimated by a factor of 10 to 100 by electrochemical techniques. Weight loss coupons and ER are recommended as necessary basic monitoring techniques....... EIS might be used for detection of MIC as the appearance of very large capacitances can be attributed to the combined ferrous sulphide and biofilm formation. Capacitance correlates directly with sulphide concentration in sterile sulphide media. Keywords: Corrosion monitoring, carbon steel, MIC, SRB...

  13. Monitoring madness

    Energy Technology Data Exchange (ETDEWEB)

    Blankinship, S.

    2006-01-15

    High quality continuous emission monitoring capability can be as essential as high quality emission control equipment. Future mercury monitoring and control requirements add to the justification for better CEMS. The article discusses two prominent mercury measurement methods - the cold vapour atomic absorptive spectrometer (CVAAs) and the atomic absorptive spectrometer (AFS). It stresses the importance of maintaining a CEMS. 1 photo.

  14. Mobility Monitor

    DEFF Research Database (Denmark)

    Schæbel, Anne-Lise; Dybbro, Karina Løvendahl; Andersen, Lisbeth Støvring;

    2015-01-01

    Undersøgelse af digital monitorering af plejehjemsbeboeres vendinger under søvn på Fremtidens Plejehjem, Nørresundby......Undersøgelse af digital monitorering af plejehjemsbeboeres vendinger under søvn på Fremtidens Plejehjem, Nørresundby...

  15. CMS Space Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Ratnikova, N. [Fermilab; Huang, C.-H. [Fermilab; Sanchez-Hernandez, A. [CINVESTAV, IPN; Wildish, T. [Princeton U.; Zhang, X. [Beijing, Inst. High Energy Phys.

    2014-01-01

    During the first LHC run, CMS stored about one hundred petabytes of data. Storage accounting and monitoring help to meet the challenges of storage management, such as efficient space utilization, fair share between users and groups and resource planning. We present a newly developed CMS space monitoring system based on the storage metadata dumps produced at the sites. The information extracted from the storage dumps is aggregated and uploaded to a central database. A web based data service is provided to retrieve the information for a given time interval and a range of sites, so it can be further aggregated and presented in the desired format. The system has been designed based on the analysis of CMS monitoring requirements and experiences of the other LHC experiments. In this paper, we demonstrate how the existing software components of the CMS data placement system, PhEDEx, have been re-used, dramatically reducing the development effort.

  16. Karst show caves – how DTN technology as used in space assists automatic environmental monitoring and tourist protection – experiment in Postojna cave

    Directory of Open Access Journals (Sweden)

    F. Gabrovšek

    2013-10-01

    Full Text Available The paper presents an experiment demonstrating a novel and successful application of Delay- and Disruption-Tolerant Networking (DTN technology for automatic data transfer in a karst cave Early Warning and Measuring System. The experiment took place inside the Postojna Cave in Slovenia, which is open to tourists. Several automatic meteorological measuring stations are set up inside the cave, as an adjunct to the surveillance infrastructure; the regular data transfer provided by the DTN technology allows the surveillance system to take on the role of an Early Warning System (EWS. One of the stations is set up alongside the railway tracks, which allows the tourist to travel inside the cave by train. The experiment was carried out by placing a DTN "data mule" (a DTN-enabled computer with WiFi connection on the train and by upgrading the meteorological station with a DTN-enabled WiFi transmission system. When the data mule is in the wireless drive-by mode, it collects measurement data from the station over a period of several seconds as the train passes the stationary equipment, and delivers data at the final train station by the cave entrance. This paper describes an overview of the experimental equipment and organisation allowing the use of a DTN system for data collection and an EWS inside karst caves where there is a regular traffic of tourists and researchers.

  17. Target organs of the Manila clam Ruditapes philippinarum for studying metal accumulation and biomarkers in pollution monitoring: laboratory and in-situ transplantation experiments.

    Science.gov (United States)

    Won, Eun-Ji; Kim, Kyung-Tae; Choi, Jin-Young; Kim, Eun-Soo; Ra, Kongtae

    2016-08-01

    To characterize the target organs of the Manila clam Ruditapes philippinarum for use in environmental study, the accumulation of trace metals and three biomarkers was measured in different organs. Exposure with Cu and Pb carried out under laboratory conditions revealed a linear uptake of metals throughout the experimental period in each tissue. In particular, significant increase was observed in gills and mantle. The increase of intracellular reactive oxygen species showed the great potential of gills as a target tissue for both Cu and Pb exposure. The highest activity of glutathione S-transferase and their relative increase in activity were also observed in gills. Metallothionein-like protein levels, however, increased greatly in the digestive gland and mantle during Cu and Pb exposure, respectively, although all tissues, except the foot, showed significant changes after 24 h of metal exposure. In the field study, the highest concentration of metals was recorded in the gills and mantle, accounting for over 50 % of the total accumulated metal in all sites. Additionally, Cu and Pb increased significantly in these two organs, respectively. However, the order of accumulation rate in laboratory exposure was not concomitant with those of the lab-based study, suggesting that different routes of metal uptake and exposure duration induce distinct partitioning of metals and regulating system in R. philippinarum. These series of exposure studies demonstrated that gills, mantle, and digestive gland in R. philippinarum are potential target tissues in environmental monitoring study using metal concentrations and biomarkers.

  18. Monitoring and evaluation of Blyth Offshore Wind Farm. Projected operation and maintenance costs of UK offshore wind farms based on the experience at Blyth

    Energy Technology Data Exchange (ETDEWEB)

    Greig, E.

    2004-07-01

    This is the fifth of seven reports in this series on specific aspects of the monitoring and evaluation of the Blyth offshore wind farm project. The report assesses the operation and maintenance (O and M) costs for the wind farm in its first full year of operation, and extrapolates these costs to give indicative costs for larger projects. It identifies both planned regular costs and unplanned site maintenance costs; some costs can be attributed to 'troubleshooting' during installation and would not be expected in future years. The Blyth wind farm, the first in the UK, consists of two 2 MW wind turbines installed approximately 1 km from the coast in water about 6 m deep at low tide. The site is exposed to the full impact of the North Sea weather, breaking waves and a significant tidal range (about 5 m). Location, boat availability, weather and insurance are identified as the key factors affecting O and M costs for future offshore wind farms in the UK.

  19. The Utility of Infliximab Therapeutic Drug Monitoring among Patients with Inflammatory Bowel Disease and Concerns for Loss of Response: A Retrospective Analysis of a Real-World Experience

    Directory of Open Access Journals (Sweden)

    Robert A. Mitchell

    2016-01-01

    Full Text Available Background. Infliximab (IFX therapeutic drug monitoring (TDM allows for objective decision making in patients with inflammatory bowel disease (IBD and loss of response. Questions remain about whether IFX TDM improves outcomes. Methods. Patients with IBD who had IFX TDM due to concerns for loss of response were considered for inclusion. Serum IFX trough concentration and anti-drug antibody (ADA concentrations were measured. Patients were grouped by TDM results: group 1, low IFX/high ADA; group 2, low IFX/low ADA; group 3, therapeutic IFX. Changes in management were analyzed according to groupings; remission rates were assessed at 6 months. Results. 71 patients were included of whom 37% underwent an appropriate change in therapy. Groups 1 (67% and 2 (83% had high adherence compared to only 9% in group 3. At 6 months, 57% had achieved remission. More patients who underwent an appropriate change in therapy achieved remission, though this did not reach statistical significance (69% versus 49%; P=0.098. Conclusions. A trend towards increased remission rates was associated with appropriate changes in management following TDM results. Many patients with therapeutic IFX concentrations did not undergo an appropriate change in management, potentially reflecting a lack of available out-of-class options at the time of TDM or due to uncertainty of the meaning of the reported therapeutic range.

  20. A web-based solution to visualize operational monitoring data in the Trigger and Data Acquisition system of the ATLAS experiment at the LHC

    CERN Document Server

    Avolio, Giuseppe; The ATLAS collaboration

    2017-01-01

    The Trigger and Data Acquisition (TDAQ) system of the ATLAS detector at the Large Hadron Collider at CERN is composed of a large number of distributed hardware and software components (about 3000 machines and more than 25000 applications) which, in a coordinated manner, provide the data-taking functionality of the overall system. During data taking runs, a huge flow of operational data is produced in order to constantly monitor the system and allow proper detection of anomalies or misbehaviours. In the ATLAS trigger and data acquisition system, operational data are archived and made available to applications by the P-BEAST (Persistent Back-End for the Atlas Information System of TDAQ) service, implementing a custom time-series database. The possibility to efficiently visualize both real-time and historical operational data is a great asset facilitating both online identification of problems and post-mortem analysis. This paper will present a web-based solution developed to achieve such a goal: the solution le...

  1. Monitoring transport conditions of key comparison travelling standards using a data logger. Experiences from key comparison CCAUV.U-K3.1

    Science.gov (United States)

    Haller, Julian; Koch, Christian

    2015-12-01

    In the framework of the international key comparison CCAUV.U-K3.1, a data logger was used to monitor temperature, pressure, humidity, and acceleration during transportation of an artefact travelling between participating laboratories. From the recorded data, environmental conditions of different kinds of transportation have been investigated and corresponding recommendations for the safe and proper transfer of artefacts between laboratories could be deduced. Transportation by courier services bears the risk of strong mechanical shocks and exposure to comparably high or low temperatures due to inappropriate handling or storage and is thus only suitable for insensitive or well-packed artefacts. Quite low temperatures (T  ≈  5 °C) have been observed in the cargo area during flights, so that hand-carrying of an artefact with transportation in the passenger cabin during flights is recommended, particularly for temperature-sensitive artefacts. Significant decreases of the pressure (p  ≈  750 mbar) have been recorded both for transportation in the passenger cabin and in the cargo area. Air-tight packing is thus recommended for pressure-sensitive devices. In general, the suitability of a data logger to provide evidence of the transport conditions during a key comparison has been demonstrated and the use of such a device is recommended for all key comparisons. The data logger has also been successfully employed to validate the protection properties of the passively insulating packaging of the artefact against pressure and temperature changes.

  2. A Web-based Solution to Visualize Operational Monitoring Data in the Trigger and Data Acquisition System of the ATLAS Experiment at the LHC

    CERN Document Server

    Avolio, Giuseppe; The ATLAS collaboration; Lehmann Miotto, Giovanna; Soloviev, Igor

    2016-01-01

    The Trigger and Data Acquisition (TDAQ) system of the ATLAS detector at the Large Hadron Collider (LHC) at CERN is composed of a large number of distributed hardware and software components (about 3000 machines and more than 25000 applications) which, in a coordinated manner, provide the data-taking functionality of the overall system. During data taking runs, a huge flow of operational data is produced in order to constantly monitor the system and allow proper detection of anomalies or misbehaviors. In the ATLAS TDAQ system, operational data are archived and made available to applications by the P-Beast (Persistent Back-End for the Atlas Information System of TDAQ) service, implementing a custom time-series database. The possibility to efficiently visualize both real-time and historical operational data is a great asset for the online identification of problems and for any post-mortem analysis. This paper will present a web-based solution developed to achieve such a goal: the solution leverages the flexibili...

  3. TRIO experiment

    Energy Technology Data Exchange (ETDEWEB)

    Clemmer, R.G.; Finn, P.A.; Malecha, R.F.; Misra, B.; Billone, M.C.; Bowers, D.L.; Fischer, A.K.; Greenwood, L.R.; Mattas, R.F.; Tam, S.W.

    1984-09-01

    The TRIO experiment is a test of in-situ tritium recovery and heat transfer performance of a miniaturized solid breeder blanket assembly. The assembly (capsule) was monitored for temperature and neutron flux profiles during irradiation and a sweep gas flowed through the capsule to an anaytical train wherein the amounts of tritium in its various chemical forms were determined. The capsule was designed to operate at different temperatures and sweep gas conditions. At the end of the experiment the amount of tritium retained in the solid was at a concentration of less than 0.1 wppM. More than 99.9% of tritium generated during the experiment was successfully recovered. The results of the experiment showed that the tritium inventories at the beginning and at the end of the experiment follow a relationship which appears to be characteristic of intragranular diffusion.

  4. 靶场试验实况信息监测及质量检测分析%Monitoring of Live Information of Range Experiments and Analysis of Quality Inspection

    Institute of Scientific and Technical Information of China (English)

    胥春

    2015-01-01

    为解决试验测控实况信息的可视化作用与全链路实况信息缺乏质量监测功能的矛盾日益突出的问题,就实况信息监测及质量检测分析开展研究。具体采用模块化的监测和质量分析方法,针对整个实况信息运行系统中的有效节点展开监测,主要帮助系统判定视音频流、IP 码流的信息故障点,实时分析流信息指标,诊断网络实况信息的传输质量,通过对原始视频图像文件压缩前后逐帧度量及损伤映射分析,检测图像信号模糊不清,拖尾或边缘锐化等问题,为快速排查和判断实况信号故障信息提供了验证结果。最终,为实况信息的高质量运行提供监测手段和检测依据。%Research is done on monitoring of live information of range experiments and quality inspection to ease the problem between visualization of live information of TT&C (Tracking,Telemetry and Command)during range ex-periments and lack of quality inspection capability for live information of the entire links.Modular monitoring and quality analysis methods are used to facilitate monitoring of valid nodes in the entire live information operation sys-tem,and the main tasks include:helping the system to identify information anomaly points of audio and video streams and IP (Internet Protocol)streams;realtime analysis of indexes of stream information;diagnosis of the transmission quality of live information in the network;detection of problems of blurred image signals,tailing and edge sharpening through frame-by-frame scaling and damage mapping analysis of the raw video image files before and after compression so as to provide verification results for fast trouble-shooting of faults and identification of a-nomalies of live information.As a result,monitoring means and quality inspection basis are provided for high quali-ty operation of live information.

  5. PMD Monitoring using Optical Sideband Filtering

    DEFF Research Database (Denmark)

    Petersen, Martin Nordal; Sambo, N; Andriolli, N

    2009-01-01

    This paper presents a simple PMD monitoring technique based on optical sideband filtering, which requires no change to the transmitter. The method is numerically and experimentally verified and tested in a real-time PMD monitoring experiment.......This paper presents a simple PMD monitoring technique based on optical sideband filtering, which requires no change to the transmitter. The method is numerically and experimentally verified and tested in a real-time PMD monitoring experiment....

  6. Tropospheric O3 over Indonesia during biomass burning events measured with GOME (Global Ozone Monitoring Experiment) and compared with backtrajectory calculation

    Science.gov (United States)

    Ladstaetter-Weissenmayer, A.; Meyer-Arnek, J.; Burrows, J. P.

    During the dry season, biomass burning is an important source of ozone precursors for the tropical troposphere, and ozone formation can occur in biomass burning plumes originating in Indonesia and northern Australia. Satellite based GOME (Global Ozone Measuring experiment) data are used to characterize the amount of tropospheric ozone production over this region during the El Niño event in September 1997 compared to a so called "normal" year 1998. Large scale biomass burning occurred over Kalimantan in 1997 caused by the absence of the northern monsoon rains, leading to significant increases in tropospheric ozone. Tropospheric ozone was determined from GOME data using the Tropospheric Excess Method (TEM). Backtrajectory calculations show that Indonesia is influenced every summer by the emissions of trace gases from biomass buring over northern Australia. But in 1997 over Indonesia an increasing of tropospheric ozone amounts can be observed caused by the fires over Indonesia itself as well as by northern Australia. The analysis of the measurements of BIBLE-A (Biomass Burning and Lightning Experiment) and using ATSR (Along the Track Scanning Radiometer) data show differences in the view to the intensity of fire counts and therefore in the amount of the emission of precursors of tropospheric ozone comparing September 1997 to September 1998.

  7. Cardiac output measurement in newborn infants using the ultrasonic cardiac output monitor: an assessment of agreement with conventional echocardiography, repeatability and new user experience.

    Science.gov (United States)

    Patel, Neil; Dodsworth, Melissa; Mills, John F

    2011-05-01

    To assess (1) agreement between the ultrasonic cardiac output monitor (USCOM) 1A device for measurement of cardiac output in newborn infants and conventional echocardiography (ECHO), (2) repeatability of USCOM measurements and (3) agreement between novice and expert users of the USCOM. A prospective observational study. The Neonatal Unit at the Royal Children's Hospital, Melbourne, Australia. 56 term and near-term infants, with no evidence of structural or functional cardiovascular disease, or haemodynamic shunts. Agreement between ECHO and USCOM was assessed by paired measurements of ventricular outputs by a single experienced user. Repeatability was assessed using five repeated measurements in 10 infants. Agreement between five novices and one expert user was assessed by paired USCOM measurements over 30 training measurements. Agreement between USCOM and ECHO for left ventricular output (LVO) was (bias, ±limits of agreement, mean % error): 14, ±108 ml/kg/min, 43%, and for right ventricular output (RVO): -59, ±160, ml/kg/min, 57%. Intra-observer repeatability was 6.7% for USCOM LVO and 3.6% for ECHO LVO. After five training measurements, the mean difference between USCOM measures of LVO by novice and expert users was less than 50 ml/kg/min, but with variability. Repeatability of USCOM measures is high in newborn infants. New users can be trained quickly, but with high inter-user variability. Agreement between USCOM and conventional ECHO is broad, and worse for RVO and LVO. Further studies are required to assess the ability of the device to detect clinically significant changes in infant cardiac output.

  8. Formaldehyde vapor produced from hexamethylenetetramine and pesticide: Simultaneous monitoring of formaldehyde and ozone in chamber experiments by flow-based hybrid micro-gas analyzer.

    Science.gov (United States)

    Yanaga, Akira; Hozumi, Naruto; Ohira, Shin-Ichi; Hasegawa, Asako; Toda, Kei

    2016-02-01

    Simultaneous analysis of HCHO and O3 was performed by the developed flow analysis system to prove that HCHO vapor is produced from solid pesticide in the presence of O3. HCHO is produced in many ways, including as primary emissions from fuel combustion and in secondary production from anthropogenic and biogenic volatile organic compounds by photochemical reactions. In this work, HCHO production from pesticides was investigated for the first time. Commonly pesticide contains surfactant such as hexamethylenetetramine (HMT), which is a heterocyclic compound formed from six molecules of HCHO and four molecules of NH3. HMT can react with gaseous oxidants such as ozone (O3) to produce HCHO. In the present study, a flow analysis system was developed for simultaneous analysis of HCHO and O3, and this system was used to determine if solid pesticides produced HCHO vapor in the presence of O3. HMT or the pesticide jimandaisen, which contains mancozeb as the active ingradient and HMT as a stabilizer was placed at the bottom of a 20-L stainless steel chamber. Air in the chamber was monitored using the developed flow system. Analyte gases were collected into an absorbing solution by a honeycomb-patterned microchannel scrubber that was previously developed for a micro gas analysis system (μGAS). Subsequently, indigotrisulfonate, a blue dye, was added to the absorbing solution to detect O3, which discolored the solution. HCHO was detected after mixing with the Hantzsch reaction reagent. Both gases could be detected at concentrations ranging from parts per billion by volume (ppbv) to 1000 ppbv with good linearity. Both HMT and jimandaisen emitted large amount of HCHO in the presence of O3.

  9. Spartina anglica eradication experiment and in situ monitoring assess structuring strength of habitat complexity on marine macrofauna at high tidal level

    Science.gov (United States)

    Cottet, Maud; de Montaudouin, Xavier; Blanchet, Hugues; Lebleu, Pascal

    2007-02-01

    The cordgrass Spartina anglica is an introduced species that tends to invade sheltered sand and mudflats, at the upper low marsh level. In Arcachon Bay, a lagoon in South West of France, the cordgrass can also replace Zostera noltii beds. The consequence of cordgrass presence on macrobenthic fauna was estimated and compared to adjacent habitats (bare sands, Z. noltii sea grass beds) during one year. The communities of the three habitats were characterised by low species richness, low abundance and biomass (when Hydrobia ulvae, 90% of abundance, is not considered) and high seasonal stability. The infaunal assemblages were particularly homogeneous between habitats without any characteristic species. Cordgrass eradication experiments were performed and zoobenthic recolonisation was observed the following year. Modifications in benthic fauna were observed on epifauna only. These results highlight the limited structuring effect of habitat heterogeneity at high tidal levels and in soft-bottom sediments where desiccation becomes the dominant factor determining infauna community structure.

  10. On the feasibility of monitoring carbon monoxide in the lower troposphere from a constellation of northern hemisphere geostationary satellites: Global scale assimilation experiments (Part II)

    Science.gov (United States)

    Barré, Jérôme; Edwards, David; Worden, Helen; Arellano, Avelino; Gaubert, Benjamin; Da Silva, Arlindo; Lahoz, William; Anderson, Jeffrey

    2016-09-01

    This paper describes the second phase of an Observing System Simulation Experiment (OSSE) that utilizes the synthetic measurements from a constellation of satellites measuring atmospheric composition from geostationary (GEO) Earth orbit presented in part I of the study. Our OSSE is focused on carbon monoxide observations over North America, East Asia and Europe where most of the anthropogenic sources are located. Here we assess the impact of a potential GEO constellation on constraining northern hemisphere (NH) carbon monoxide (CO) using data assimilation. We show how cloud cover affects the GEO constellation data density with the largest cloud cover (i.e., lowest data density) occurring during Asian summer. We compare the modeled state of the atmosphere (Control Run), before CO data assimilation, with the known "true" state of the atmosphere (Nature Run) and show that our setup provides realistic atmospheric CO fields and emission budgets. Overall, the Control Run underestimates CO concentrations in the northern hemisphere, especially in areas close to CO sources. Assimilation experiments show that constraining CO close to the main anthropogenic sources significantly reduces errors in NH CO compared to the Control Run. We assess the changes in error reduction when only single satellite instruments are available as compared to the full constellation. We find large differences in how measurements for each continental scale observation system affect the hemispherical improvement in long-range transport patterns, especially due to seasonal cloud cover. A GEO constellation will provide the most efficient constraint on NH CO during winter when CO lifetime is longer and increments from data assimilation associated with source regions are advected further around the globe.

  11. Monarch Monitoring

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The US Fish and Wildlife Service has engaged in a multi-partnered, integrated strategy for monitoring conservation of the monarch butterfly (Danaus plexippus...

  12. Monitoring Hadoop

    CERN Document Server

    Singh, Gurmukh

    2015-01-01

    This book is useful for Hadoop administrators who need to learn how to monitor and diagnose their clusters. Also, the book will prove useful for new users of the technology, as the language used is simple and easy to grasp.

  13. Recombination monitor

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, S. Y. [Brookhaven National Lab. (BNL), Upton, NY (United States); Blaskiewicz, M. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    2017-02-03

    This is a brief report on LEReC recombination monitor design considerations. The recombination produced Au78+ ion rate is reviewed. Based on this two designs are discussed. One is to use the large dispersion lattice. It is shown that even with the large separation of the Au78+ beam from the Au79+ beam, the continued monitoring of the recombination is not possible. Accumulation of Au78+ ions is needed, plus collimation of the Au79+ beam. In another design, it is shown that the recombination monitor can be built based on the proposed scheme with the nominal lattice. From machine operation point of view, this design is preferable. Finally, possible studies and the alternative strategies with the basic goal of the monitor are discussed.

  14. Evaluation and monitoring of Research and Development projects and programmes: Experience of the task force on the evaluation of TAFTIE; La valutazione e il monitoraggio dei progetti e dei programmi di R&S: esperienza della Task Force sulla valutazione di TAFTIE

    Energy Technology Data Exchange (ETDEWEB)

    Scarpitti, L. [ENEA, Rome (Italy). Funzione Centrale Studi

    1996-08-01

    This paper allows to compare the experiences in the evaluation and monitoring fields among 8 different European agencies (ENEA, Italian National Agency for New Technologies, Energy and the Environment, included) directly involved in technology transfer projects and programmes. In order to compare the different experiences three levels of analysis are used: evaluation methodologies, performance indicators, project characterisation and databases.

  15. Establish and Manage Jurisdiction-wide Traffic Monitoring Systems: North American Experiences%管辖范围内的交通监控系统的建立和管理:北美经验

    Institute of Scientific and Technical Information of China (English)

    钟鸣; 刘国新

    2007-01-01

    With the rapid motorization process in China, an increasingly complicated highway transportation system has been developed. Reliable national and provincial traffic monitoring systems are becoming necessary. A review of experiences from developed countries in North America can be helpful for highway administrations and agencies to design and implement effective and efficient traffic monitoring systems. Highway agencies in North America have over time developed "standard" traffic monitoring systems based on guidelines from the Federal Highway Administration (FHWA), the American Association of State Highway and Transportation Officials (AASHTO), and the American Society for Testing and Materials (ASTM). Common practices are adopted based on analyses of system accuracy, reliability, and cost-effectiveness. The common practices can produce equivalent and comparable traffic summary statistics, which are able to support sensible decision-makings at all aspects of highway transportation. The experiences of highway agencies, current practices, and related guidelines in North America are therefore presented first. Principles for guiding development and operation of traffic data programs are then summarized and reviewed. Existing problems and active research for traffic monitoring practices and standards are also identified and discussed. It is believed that the reviewed experiences, guidelines and principles will be helpful for China to establish effective and common-practice based "standard" traffic monitoring systems.%随着中国机动化进程的加快,高速公路运输系统日益复杂化,建立可靠的国家和地方交通监控系统已成为必需.回顾北美发达国家的经验对于高速公路的管理和设计部门设计及实施有效的交通监控系统是有益的.在联邦高速公路管理局(FHWA),美国州公路和运输官员协会(AASHTO)以及美国材料与试验协会(ASTM)的指导方针下,北美高速公路部门开发了一套"标准的"

  16. Bayesian Monitoring.

    OpenAIRE

    Kirstein, Roland

    2005-01-01

    This paper presents a modification of the inspection game: The ?Bayesian Monitoring? model rests on the assumption that judges are interested in enforcing compliant behavior and making correct decisions. They may base their judgements on an informative but imperfect signal which can be generated costlessly. In the original inspection game, monitoring is costly and generates a perfectly informative signal. While the inspection game has only one mixed strategy equilibrium, three Perfect Bayesia...

  17. Maternity care practices and breastfeeding experiences of women in different racial and ethnic groups: Pregnancy Risk Assessment and Monitoring System (PRAMS).

    Science.gov (United States)

    Ahluwalia, Indu B; Morrow, Brian; D'Angelo, Denise; Li, Ruowei

    2012-11-01

    Research shows that maternity care practices are important to promoting breastfeeding in the early post partum period; however, little is known about the association between maternity care practices and breastfeeding among different racial and ethnic groups. We examined the association between maternity care practices and breastfeeding duration to ≥10 weeks overall and among various racial and ethnic groups using data from the Pregnancy Risk Assessment and Monitoring System (PRAMS). PRAMS is a state, population-based surveillance system that collects information on maternal behaviors. We used maternity care practices data from 11 states and New York City with response rates ≥70% from 2004 to 2006. Multiple maternity care practices were examined and the analysis adjusted for demographic characteristics, participation in the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC), lifestyle, and infant variables. The outcome variable for multivariable analysis was breastfeeding duration to Breastfeeding patterns varied with white and Hispanic women reporting highest breastfeeding initiation and duration prevalence. Overall, practices positively associated with ≥10 duration were: breastfeeding initiated within the first hour after birth (adjusted OR [AOR] = 1.29; 95% CI: 1.16-1.45); fed breast milk only (AOR = 2.40; 95% CI: 2.15-2.68); breastfed on demand (AOR = 1.23; 95% CI 1.08-1.40) and receiving telephone support (AOR = 1.20; 95% CI: 1.03-1.39). Maternity care practices associated with breastfeeding to ≥10 weeks varied across three racial/ethnic groups. One practice, that of giving newborns breast milk only, was positively associated with breastfeeding duration of ≥10 weeks across all three groups. Maternity care practices associated with breastfeeding continuation to ≥10 weeks varied by race/ethnicity. For example: breastfeeding within the first hour, baby given a pacifier, and assistance from hospital staff, were

  18. Monitoring in educational development projects : the development of a monitoring system

    NARCIS (Netherlands)

    Plomp, Tjeerd; Huijsman, Hari; Kluyfhout, Eric

    1992-01-01

    Monitoring in education is usually focused on the monitoring of educational systems at different levels. Monitoring of educational projects receives only recently explicit attention. The paper discusses first the concepts of educational monitoring and evaluation. After that, the experience with deve

  19. Wetting and drying of masonry walls: 2D-resistivity monitoring of driving rain experiments on historic stonework in Oxford, UK

    Science.gov (United States)

    Sass, O.; Viles, H. A.

    2010-01-01

    2D resistivity methods can provide useful information about moisture distributions within porous historic stonework, especially when used in conjunction with simulated driving rain. Moisture is known to be a highly important factor in the deterioration of porous stone. We report here on a series of experiments on historic walls within the centre of Oxford, UK, which illustrate varying degrees of deterioration (including the formation of gypsum-rich black crusts and exfoliating hollows). Using medical electrodes we have been able to carry out non-invasive and non-destructive 2D resistivity surveys before and after simulated rainfall to investigate the progress of wetting and drying. We have applied tentative calibrations to convert resistivity values to moisture contents. Our results show that rainfall penetrates in predictable ways, with clearly defined wetting and drying fronts. Stone blocks with highly weathered surfaces exhibit the most rapid and high levels of water uptake, but also dry out more quickly than crusted or sound blocks. Thus, positive feedbacks may be encouraged whereby more water is cycled through damaged blocks, thereby enhancing the potential for further damage.

  20. An Unmanned Airship Thermal Infrared Remote Sensing System for Low-Altitude and High Spatial Resolution Monitoring of Urban Thermal Environments: Integration and an Experiment

    Directory of Open Access Journals (Sweden)

    Peng Ren

    2015-10-01

    Full Text Available Satellite remote sensing data that lacks spatial resolution and timeliness is of limited ability to access urban thermal environment on a micro scale. This paper presents an unmanned airship low-altitude thermal infrared remote sensing system (UALTIRSS, which is composed of an unmanned airship, an onboard control and navigation subsystem, a task subsystem, a communication subsystem, and a ground-base station. Furthermore, an experimental method and an airborne-field experiment for collecting land surface temperature (LST were designed and conducted. The LST pattern within 0.8-m spatial resolution and with root mean square error (RMSE value of 2.63 °C was achieved and analyzed in the study region. Finally, the effects of surface types on the surrounding thermal environment were analyzed by LST profiles. Results show that the high thermal resolution imagery obtained from UALTIRSS can provide more detailed thermal information, which are conducive to classify fine urban material and assess surface urban heat island (SUHI. There is a significant positive correlation between the average LST of profiles and the percent impervious surface area (ISA% with R2 around 0.917. Overall, UALTIRSS and the retrieval method were proved to be low-cost and feasible for studying micro urban thermal environments.

  1. Peer Review of "Analysis and Simulation of Near-Field Wave Motion Data from the Source Physics Experiment Explosions," Antoun, et al, 2011 Monitoring Research Review

    Energy Technology Data Exchange (ETDEWEB)

    Steedman, David W. [Los Alamos National Laboratory

    2012-06-19

    The following is primarily a review of 'Analysis and Simulation of Near-Field Wave Motion Data from the Source Physics Experiment Explosions,' Antoun, et al, published by Lawrence Livermore National Laboratory (LLNL) after SPE-1 in 2011 (Ref. 1). However, LLNL analysis of SPE-2 (Ref. 2) will also be discussed. A review by Los Alamos National Laboratory (LANL) personnel of Reference 1 finds both the evidence of the effects of joints on the data and the correlation of calculations with the data weak. This conclusion is made on three separate levels: (1) Fundamental observations made of the various referenced figures taken as presented; (2) Observations made following corrections to errors and omissions to the selected data; and (3) Observations made after considering likely errors in the raw data set. The evidence presented in the referenced papers relies on subjective interpretation of various figures. This is the nature of this technical field of study and, indeed, much of our observation is also subjective.

  2. Development of response models for the Earth Radiation Budget Experiment (ERBE) sensors. Part 1: Dynamic models and computer simulations for the ERBE nonscanner, scanner and solar monitor sensors

    Science.gov (United States)

    Halyo, Nesim; Choi, Sang H.; Chrisman, Dan A., Jr.; Samms, Richard W.

    1987-01-01

    Dynamic models and computer simulations were developed for the radiometric sensors utilized in the Earth Radiation Budget Experiment (ERBE). The models were developed to understand performance, improve measurement accuracy by updating model parameters and provide the constants needed for the count conversion algorithms. Model simulations were compared with the sensor's actual responses demonstrated in the ground and inflight calibrations. The models consider thermal and radiative exchange effects, surface specularity, spectral dependence of a filter, radiative interactions among an enclosure's nodes, partial specular and diffuse enclosure surface characteristics and steady-state and transient sensor responses. Relatively few sensor nodes were chosen for the models since there is an accuracy tradeoff between increasing the number of nodes and approximating parameters such as the sensor's size, material properties, geometry, and enclosure surface characteristics. Given that the temperature gradients within a node and between nodes are small enough, approximating with only a few nodes does not jeopardize the accuracy required to perform the parameter estimates and error analyses.

  3. ATLAS job monitoring in the Dashboard Framework

    CERN Document Server

    Sargsyan, L; The ATLAS collaboration; Campana, S; Karavakis, E; Kokoszkiewicz, L; Saiz, P; Schovancova, J; Tuckett, D

    2012-01-01

    Monitoring of the large-scale data processing of the ATLAS experiment includes monitoring of production and user analysis jobs. The Experiment Dashboard provides a common job monitoring solution, which is shared by ATLAS and CMS experiments. This includes an accounting portal as well as real-time monitoring. Dashboard job monitoring for ATLAS combines information from PanDA job processing database, Production system database and monitoring information from jobs submitted through GANGA to Workload Management System (WMS) or local batch systems. Usage of Dashboard-based job monitoring applications will decrease load on the PanDA database and overcome scale limitations in PanDA monitoring caused by the short job rotation cycle in the PanDA database. Aggregation of the task/job metrics from different sources provides complete view of job processing activity in ATLAS scope.

  4. ATLAS job monitoring in the Dashboard Framework

    CERN Document Server

    Andreeva, J; The ATLAS collaboration; Karavakis, E; Kokoszkiewicz, L; Saiz, P; Sargsyan, L; Schovancova, J; Tuckett, D

    2012-01-01

    Monitoring of the large-scale data processing of the ATLAS experiment includes monitoring of production and user analysis jobs. The Experiment Dashboard provides a common job monitoring solution, which is shared by ATLAS and CMS experiments. This includes an accounting portal as well as real-time monitoring. Dashboard job monitoring for ATLAS combines information from PanDA job processing database, Production system database and monitoring information from jobs submitted through GANGA to Workload Management System (WMS) or local batch systems. Usage of Dashboard-based job monitoring applications will decrease load on the PanDA database and overcome scale limitations in PanDA monitoring caused by the short job rotation cycle in the PanDA database. Aggregation of the task/job metrics from different sources provides complete view of job processing activity in ATLAS scope.

  5. Indication of the Expression of Transgene in Rice Plant Based on Hyperspectral Remote Sensing Technique Ⅱ-Growth Monitoring of Samples in the Contrast Experiment%Indication of the Expression of Transgene in Rice Plant Based on Hyperspectral Remote Sensing Technique Ⅱ——Growth Monitoring of Samples in the Contrast Experiment

    Institute of Scientific and Technical Information of China (English)

    LI Ru; CHEN Jin-song; YUAN Ding-yang; LIN Hui; TAN Yan-ning; YUE Yue-min

    2011-01-01

    Since the complication of monitoring and evaluating the problems about the transgenic expression and its impacts on the receptor in the transgenic crop breeding and other relevant evaluated works, the authors in the present work tried to assess the differences of spectral parameters of the transgenic rice in contrast with its parent group quantitatively and qualitatively, fulfilling the growth monitoring of the transgenic samples.The spectral parameters (spectral morphological characteristics and indices) chosen are highly related to internal or external stresses to the receipts, and thus could be applied as indicators of biophysical or biochemical processes changes of plant. By ASD portable field spectroradiometer with high-density probe, fine foliar spectra of 8 groups were obtained. By analyzing spectral angle and continuum removal, the spectral morphological differences and their locations of sample spectra were found which could be as auxiliary priori knowledge for quantitative analysis. By investigating spectral indices of the samples, the quantitative differences of spectra were revealed about foliar chlorophyll a+b and carotenoid content. In this study both the spectral differences between transgenic and parent groups and among transgenic groups were investigated. The results show that hyperspectral technique is promising and a helpful auxiliary tool in the study of monitoring the transgenic crop and other relevant researches. By this technique, quantitative and qualitative results of sample spectra could be provided as prior knowledge, as certain orientation, for laboratory professional advanced transgenic breeding study.

  6. Wireless monitoring method and experiments for SMA reinforced composite laminates based on RFID%基于RFID的SMA增强复合材料层合板无线监测方法及实验

    Institute of Scientific and Technical Information of China (English)

    袁江; 俞云雷; 吴静雅; 陈宇天; 陆观; 邱自学

    2012-01-01

    将无线射频识别技术(RFID)引入结构健康监测领域,提出了利用传感标签和读写器实现结构健康无线监测的新方法。以埋入环氧树脂复合材料结构中具有一定规格和布局的NiTi形状记忆合金(SMA)超弹丝作为电容器的电极,分布的RFID传感标签实时获取形状记忆合金丝间的微小电容信号,并将其与时间、位置编码信息打包后无线传输给读写器和监控站点。对两种SMA增强复合材料层合板,分别在万能材料试验机和冲击试验机上进行了拉伸、弯曲和冲击实验,结果表明,系统能实现对埋入结构中NiTi超弹性传感元件的高精度监测,并具有功能扩展方便、路由选择与定位简单的特点。%The radio frequency identification technology was introduced into the area of structure health monitoring, and a new wireless monitoring method for SMA reinforced epoxy composite laminates was proposed by using sensor-tags and reader. Using the SMA wires as the capacitor electrodes and the sample matrix as the dielectric, the capacitance signals were measured and packaged with the current time and address information by sensor-tags, then transmitted to the monitoring station by reader networks. For two kinds of NiTi reinforced composite laminated board, the tensile test, bending test and impact experiment were conducted in universal material testing machine and impact testing machine, respectively. The results show that the system can monitor the outputs by embedded hyperelastic wires in composite structures, and it has the characteristics of good expansibility, simple routing and easy positioning.

  7. Application on drilling parameter monitor in drilling engineering monitoring

    Institute of Scientific and Technical Information of China (English)

    Shu DIAO; Zhenbao LING; Wenjing LIANG

    2008-01-01

    The drilling parameter monitor is an important tool in drilling engineering applied to monitoring drilling process, carrying out scientific analysis and decision-making. Based on discussing the present development situation of the domestic and foreign drilling machine parameter monitors, the metering scheme for vehicle-loaded drilling parameter monitor was designed. By using detection system for MSP430 single-chip microcomputer (SCM) in combination with peripheral circuit such as sensors, the drilling-rig control system was obtained to detect, and for every parameter in real-time display in order to keep operating the drilling rig status. The experiment shows that the drilling parameter monitor reaches design requirements and can be applied to drilling engineering monitoring, which has characters such as simple structure, high credibility and low cost.

  8. Kontemplativ opmærksomhedskultur i skolen

    DEFF Research Database (Denmark)

    Nielsen, Anne Maj; Kolmos, Marie

    2013-01-01

    I denne artikel præsenterer vi resultater af en kvalitativ undersøgelse af en længerevarende indsats med kontemplativ undervisning i en dansk skoleklasse. Til forskel fra de fleste andre undersøgelser på området, som vedrører kortvarige indsatser (typisk omkring 8 uger), kan denne undersøgelse vi...

  9. 基于自动型全站仪的桥梁结构动态监测试验%Experiment of Dynamic Monitoring of Bridge Structures Using Robotic Total Station

    Institute of Scientific and Technical Information of China (English)

    余加勇; 邵旭东; 孟晓林; 李立峰; 晏班夫

    2014-01-01

    为了解决桥梁动态监测中难以同步监测准静态位移和动态位移的问题,首次采用自动型全站仪(RTS)监测桥梁结构位移和振动频率,并在英国诺丁汉大学 NGB实验室、诺丁汉威尔福德悬索桥分别进行模拟试验与实桥监测试验。集成全球导航卫星系统(GNSS)接收机和自制精密时间数据采集器,使RTS和加速度计同步采集GNSS时间,用皮尔逊积矩相关系数法修正时滞;设计8阶Ⅰ型切比雪夫高通滤波器,分离RTS位移中的准静态部分和动态部分,并使用改进的切比雪夫高通滤波和梯形法则数值积分方法,从加速度数据中获取位移数据。分析结果表明:RTS 能同时监测结构振动准静态位移和动态位移,静态监测精度优于0.5 mm,动态监测精度优于2.0 mm;RTS和加速度计监测的动态位移、振动频率结果吻合,两者位移差值的标准差小于0.7 mm;RTS 监测方法精度能满足实际工程要求。%It is difficult to simultaneously measure the quasi-static and dynamic displacements in the dynamic monitoring of bridges. To solve this drawback, robotic total station (RTS ) technique was used to monitor dynamic displacements and the vibration frequencies of bridges. The simulated and full-scale experiments were conducted in the NGB lab at the University of Nottingham and the Wildford suspension bridge in Nottingham,respectively.The RTS sensor could acquire GNSS time by a integrated GNSS receiver and at the same time the accelerometer sensor could acquire GNSS time by a precise time data logger (PTDL ). The correlation coefficient method of the Pearson product moment was used to verify the time delays.The 8-order Ⅰ type Chebyshev highpass filter was designed to separate the quasi-static component of RTS displacement from the dynamic response.The trapezoidal rule numerical integration method and the improved chebyshev highpass filter were used to obtain the displacement series from the

  10. 受经验约束的Web故障监测数据自适应重写算法%Adaptive Rewriting Algorithm of Web Fault Monitoring Data with Experience Constrained

    Institute of Scientific and Technical Information of China (English)

    刘荷花

    2015-01-01

    Adaptive rewriting algorithm of Web fault monitoring data can realize extremum disturbed blind separation, and improve the ability of Web fault monitoring database, and then improve the performance of Web network fault diagnosis. The Web abnormal data rewriting algorithm is proposed based on adaptive extreme disturbance, the adaptive function is de⁃fined, and the particle swarm optimization evolutionary search ability is obtained. Certain basis function is selected for matching the fault monitoring signals, in order to make the particle swarm to escape from local minimum, maximum pertur⁃bation operator is enhanced. The experience constraint function regulation is proposed to improve the performance of Web network fault diagnosis. Simulation results show that, the algorithm can effectively realize adaptive rewriting of the failure data of Web network, signal recovery and tracking effect is good, the Web database access accuracy is improved, so it has good application value in network fault detection and data scheduling access, etc.%对Web故障监测异常数据的自适应重写可以实现对Web数据库的极值扰动盲分离,提高Web故障监测数据库的访问能力,进而提高对Web网络故障的诊断性能。提出基于极值扰动的Web异常数据自适应重写算法,引入自适应经验函数,优化粒子群进化搜索能力。选择一定的基函数与故障监测信号进行匹配,为了使粒子群摆脱局部极值,增加了极值扰动算子,进行经验约束函数调控,提高对Web网络故障的诊断性能。仿真实验表明,该算法能有效实现对Web网络故障数据的自适应重写,信号恢复和跟踪效果较好,提高了对Web数据库的访问精度,在Web网络数据库故障检测和数据调度访问等领域具有较好的应用价值。

  11. Analysis of the Use Value of Patient's Experience and Satisfaction Monitor-ing%分析患者体验及满意监测的利用价值

    Institute of Scientific and Technical Information of China (English)

    古艳红; 陈永清

    2014-01-01

    目的:分析患者体验及满意监测的利用价值。方法2011年6月-2013年6月,从本地的四所社康中心中随机400例患者作为研究对象,利用患者体验和满意监测(PKU-VPSM)工具,对四所社康中心进行连续性监测。结果一共发放调查问卷共400份,收回有效问卷380份,有效回收率为95%。经统计,患者普遍对社康中心的整体服务较为满意,两组患者在总体服务满意度和硬件条件满意度方面存在一定的差异,但差异无统计学意义(P>0.05),且均处于较高的水平;但两组患者在服务有效性和基本医疗水平满意度,以及老年特色服务满意度等各方面的差异有统计学意义(P0.05), and were at a higher level;But the differences between two groups of patients in the level of service effectiveness and basic medical service satisfaction, as well as the elderly characteristic service satisfaction and so on were significant (P<0.05). Conclusion Insisting on monitoring patient's experience and satisfaction for a long time, can guide the daily work of community health centers, positively safeguard the rights and interests of the patients, and make full use of the use value of patient's experience and satisfaction monitoring.

  12. Energy Monitoring

    DEFF Research Database (Denmark)

    Hansen, Claus T.; Madsen, Dines; Christiensen, Thomas

    Energy measurement has become an important aspect of our daily lives since we have learned that energy consumption, is one of the main source of global warming. Measuring instruments varies from a simple watt-meter to more sophisticated microprocessor control devices. The negative effects...... that fossil fuels induce on our environment has forced us to research renewable energy such as sunlight, wind etc. This new environmental awareness has also helped us to realize the importance of monitoring and controlling our energy use. The main purpose in this research is to introduce a more sophisticated...... but affordable way to monitor energy consumption of individuals or groups of home appliances. By knowing their consumption the utilization can be regulated for more efficient use. A prototype system has been constructed to demonstrate our idea....

  13. Energy Monitoring

    DEFF Research Database (Denmark)

    Hansen, Claus T.; Madsen, Dines; Christiensen, Thomas

    Energy measurement has become an important aspect of our daily lives since we have learned that energy consumption, is one of the main source of global warming. Measuring instruments varies from a simple watt-meter to more sophisticated microprocessor control devices. The negative effects...... that fossil fuels induce on our environment has forced us to research renewable energy such as sunlight, wind etc. This new environmental awareness has also helped us to realize the importance of monitoring and controlling our energy use. The main purpose in this research is to introduce a more sophisticated...... but affordable way to monitor energy consumption of individuals or groups of home appliances. By knowing their consumption the utilization can be regulated for more efficient use. A prototype system has been constructed to demonstrate our idea....

  14. Material monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Kotter, W.; Zirker, L.; Hancock, J.A.

    1995-11-01

    Waste Reduction Operations Complex (WROC) facilities are located at the Idaho National Engineering Laboratory (INEL). The overall goal for the Pollution Prevention/Waste Minimization Unit is to identify and establish the correct amount of waste generated so that it can be reduced. Quarterly, the INEL Pollution Prevention (P2) Unit compares the projected amount of waste generated per process with the actual amount generated. Examples of waste streams that would be addresses for our facility would include be are not limited to: Maintenance, Upgrades, Office and Scrap Metal. There are three potential sources of this variance: inaccurate identification of those who generate the waste; inaccurate identification of the process that generates the waste; and inaccurate measurement of the actual amount generated. The Materials Monitoring Program was proposed to identify the sources of variance and reduce the variance to an acceptable level. Prior to the implementation of the Material Monitoring Program, all information that was gathered and recorded was done so through an informal estimation of waste generated by various personnel concerned with each processes. Due to the inaccuracy of the prior information gathering system, the Material Monitoring Program was established. The heart of this program consists of two main parts. In the first part potential waste generators provide information on projected waste generation process. In the second part, Maintenance, Office, Scrap Metal and Facility Upgrade wastes from given processes is disposed within the appropriate bin dedicated to that process. The Material Monitoring Program allows for the more accurate gathering of information on the various waste types that are being generated quarterly.

  15. 基于关键帧提取技术的花开过程视频监测系统开发及试验%Development and experiment of blooming video monitoring system based on key frame extraction method

    Institute of Scientific and Technical Information of China (English)

    高林; 王璐; 闫磊; 张军国

    2014-01-01

    each shot is fixed in the blooming process, the color information distribution change little, and the relative movement for the different parts of flower in the blooming process is clear. In this paper, the author conducts research on a key frame retrieval method based on optical flow and entropy statistics for blooming video. Experiments showed that the sensitive details can be collected from the flower blooming process, then those key frames collected can be composed into video with detailed information about the flower blooming, and the video is smooth. When the system is in the practical application, first, we need to obtain the original video of the blooming process. Then according to the flower growth characteristics, we extract key frames using a method of optical flow and entropy statistics for the obtained original video. This system includes two different key frames judgment modes: number of key frames mode and orientation information entropy threshold mode. When a certain mode is chosen and the relevant parameter is set, then the key frame video composition can be completed with this system. Finally, it can compose a key frame video preview about the blooming process. In this paper, the lilies open process was taken as an example and three video capture experiments were conducted by choosing different lilies at different time. These achieved video monitoring based on the key frame retrieval method. Experiment results proved by the key frame extraction method showed that the blooming process video retained the flowers blooming details naturally because of a small amount of data (it could reduce to above 84.6%of the original video data in the experiments.). The system can provide the relevant personnel a time-saving (it is only about 15.4%below of the original video playback time in the experiments.) and convenient monitoring platform about the blooming process.

  16. Airbag pressure gauge and experience method monitoring cuff pressure%应用气囊测压表与经验法监测气囊压力的临床观察

    Institute of Scientific and Technical Information of China (English)

    刘新平; 王爱芹; 卢艳霞

    2014-01-01

    目的 探讨气囊测压表监测人工气道气囊压力在临床应用中的价值.方法 应用气囊测压表测量29例患者气囊实际压力,与经验法判断进行对比.结果 29例中,27.59%高于理想值,48.28%低于理想值,仅24.14%处于理想值;测压表与经验法的相关系数为0.469,为低度相关.经验法的准确性41.02%,敏感性为11.77%,特异性63.64%,阳性预测值20.00%,阴性预测值48.28%,P=0.140.结论 用经验法判断气囊压力存在较大误差,建议定期应用气囊测压表对气囊进行压力检测,维持气囊压力在安全范围以保证机械通气患者安全.%Objective To explore the clinical value of airbag pressure gauge monitoring artificial airway cuff pressure.Methods 29 patients' cuff pressure was measured with airbag pressure gauge and experience method.The results between the two methods were compared.Results Among the 29 patients,27.59% patients had higher pressure than ideal value,48.28% lower,and only 24.14% equal.The correlation between airbag pressure gauge and experience method was a low level of 0.469.The accuracy was 41.02%,the sensitivity 11.77%,the specificity 63.64%,the positive predict value 20.00%,and the negative predict value 48.28% of experience method,P =0.140.Conclusions Measuring cuff pressure with experience method has a big error.Therefore,measuring cuff pressure regularly with airbag pressure gauge is recommended to ensure the safety of patients undertaking mechanical ventilation maintaining the cuff pressure within a safe range.

  17. Technology monitoring; Technologie-Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Eicher, H.; Rigassi, R. [Eicher und Pauli AG, Liestal (Switzerland); Ott, W. [Econcept AG, Zuerich (Switzerland)

    2003-07-01

    This study made for the Swiss Federal Office of Energy (SFOE) examines ways of systematically monitoring energy technology development and the cost of such technologies in order to pave the way to a basis for judging the economic development of new energy technologies. Initial results of a survey of the past development of these technologies are presented and estimates are made of future developments in the areas of motor-based combined heat and power systems, fuel-cell heating units for single-family homes and apartment buildings, air/water heat pumps for new housing projects and high-performance thermal insulation. The methodology used for the monitoring and analysis of the various technologies is described. Tables and diagrams illustrate the present situation and development potential of various fields of technology.

  18. The $Z \\to \\mu^{+}\\mu^{-}$ decay channel in the CMS experiment at LHC: from cross-section measurement with the 2010 7 TeV collision dataset to offline machine luminosity monitor

    CERN Document Server

    De Gruttola, Michele; Sciacca, Crisostomo

    2010-01-01

    This thesis has been possible thank to a bourse from Italian Minister of Education, MIUR. During the phd program I had the opportunity to take part actively to the CMS experiments at CERN: many aspects of the chain to take and analyze the data have been studied. Indeed, in the first year of the phd program a tool to store and retrieve the CMS condition data in the CMS databases has been developed. A web monitor tool has been also deployed to trace and check the correctness of the transactions. Instead, in the second and third year of the phd program the decay of the Z boson in two muons has been analyzed. The CMS detector, which took 7 TeV collision data for the entire 2010 at CERN, is designed to provide precise measurements of TeV proton-proton collisions at the Large Hadron Collider. The measurements of the cross section of the Z boson production at LHC provides a first test of the Standard Model in a new energy domain and may reveal exotic physics processes. Moreover, the properties of the Z boson resonan...

  19. ATLAS online data quality monitoring

    CERN Document Server

    Cuenca Almenar, C; The ATLAS collaboration; Hadavand, H; Ilchenko, Y; Kolos, S; Slagle, K; Taffard, A

    2010-01-01

    Every minute the ATLAS detector is taking data, the monitoring framework serves several thousands physics events to monitoring data analysis applications, handles millions of histogram updates coming from thousands applications, executes over forty thousand advanced data quality checks for a subset of those histograms, displays histograms and results of these checks on several dozens of monitors installed in main and satellite ATLAS control rooms. The online data quality monitoring system has been of great help in providing quick feedback to the subsystems about the functioning and performance of the different parts of ATLAS by providing a configurable easy and fast visualization of all this information. The Data Quality Monitoring Display (DQMD) is a visualization tool for the automatic data quality assessment of the ATLAS experiment. It is the interface through which the shift crew and experts can validate the quality of the data being recorded or processed, be warned of problems related to data quality, an...

  20. Monitoring microcirculation.

    Science.gov (United States)

    Ocak, Işık; Kara, Atila; Ince, Can

    2016-12-01

    The clinical relevance of microcirculation and its bedside observation started gaining importance in the 1990s since the introduction of hand-held video microscopes. From then, this technology has been continuously developed, and its clinical relevance has been established in more than 400 studies. In this paper, we review the different types of video microscopes, their application techniques, the microcirculation of different organ systems, the analysis methods, and the software and scoring systems. The main focus of this review will be on the state-of-art technique, CytoCam-incident dark-field imaging, and the most recent technological and technical updates concerning microcirculation monitoring.

  1. Cardiac event monitors

    Science.gov (United States)

    ... ECG) - ambulatory; Continuous electrocardiograms (EKGs); Holter monitors; Transtelephonic event monitors ... attached. You can carry or wear a cardiac event monitor up to 30 days. You carry the ...

  2. Monitoring Leverage

    DEFF Research Database (Denmark)

    Geanakoplos, John; Heje Pedersen, Lasse

    2014-01-01

    We argue that leverage is a central element of economic cycles and discuss how leverage can be properly monitored. While traditionally the interest rate has been regarded as the single key feature of a loan, we contend that the size of the loan, i.e., the leverage, is in fact a more important...... measure of systemic risk. Indeed, systemic crises tend to erupt when highly leveraged economic agents are forced to deleverage, sending the economy into recession. We emphasize the importance of measuring both the average leverage on old loans (which captures the economy's vulnerability) and the leverage...... offered on new loans (which captures current credit conditions) since the economy enters a crisis when leverage on new loans is low and leverage on old loans is high. While leverage plays an important role in several economic models, the data on leverage is model-free and simply needs to be collected...

  3. Treaty Monitoring

    DEFF Research Database (Denmark)

    Canty, M.; Lingenfelder, I.; Nielsen, Allan Aasbjerg;

    2009-01-01

    This volume provides the reader with an overview of the state-of-the-art Earth Observation (EO) related research that deals with national and international security. An interdisciplinary approach was adopted in this book in order to provide the reader with a broad understanding on the uses...... of remote sensing technologies. The book therefore comprises management aspects (issues and priorities of security research, crisis response), applied methodologies and process chains (treaty monitoring, estimation of population densities and characteristics, border permeability models, damage assessment......, as well as project managers and decision makers working in the field of security having an interest in technical solutions. The integrative use of many figures and sample images are ideal in enabling the non-technical reader to grasp quickly the modern technologies that are being researched in the area...

  4. Intracranial pressure monitoring

    Science.gov (United States)

    ICP monitoring; CSF pressure monitoring ... There are 3 ways to monitor pressure in the skull (intracranial pressure). INTRAVENTRICULAR CATHETER The intraventricular catheter is the most accurate monitoring method. To insert an intraventricular catheter, a ...

  5. Contamination monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Alamares, A.L. [Philippine Nuclear Research Inst., Diliman, Quezon City (Philippines)

    1997-06-01

    By virture of Republic Act 2067, as amended the Philippine Atomic Energy Commission (PAEC), now renamed Philippine Nuclear Research Institute (PNRI) is the government agency charged with the regulations and control of radioactive materials in the Philippines. The protection against the hazards of non-ionizing radiation is being monitored by the Radiological Health Service (RHS) of the Department of Health pursuant to the provision of Presidental Decree 480. The RHS issues licenses for possession, handling, and use of x-ray machines and equipment, both industrial and medical, and provide radiation protection training to x-ray technologists and technicians. As part of its regulatory function, the PNRI is charged with the responsibility of assuring that the radiation workers and the public are protected from the hazards associated with the possession, handling, production, manufacturing, and the use of radioactive materials and atomic energy facilities in the Philippines. The protection of radiation workers from the hazards of ionizing radiation has always been a primary concern of PNRI and by limiting the exposure of radiation workers, the risk to population is kept to within acceptable level. In this paper, the following items are described: radiation protection program, radiation protection services, radiation control, and problems encountered/recommendation. (G.K.)

  6. CMS OnlineWeb-Based Monitoring

    Science.gov (United States)

    Badgett, William; Chakaberia, Irakli; Lopez-Perez, Juan Antonio; Maeshima, Kaori; Maruyama, Sho; Soha, Aron; Sulmanas, Balys; Wan, Zongru

    For large international High Energy Physics experiments, modern web technologies make the online monitoring of detector status, data acquisition status, trigger rates, luminosity, etc., accessible for the collaborators anywhere and anytime. This helps the collaborating experts monitor the status of the experiment, identify the problems and improve data taking efficiency. We present the online Web-Based Monitoring project of the CMS experiment at the LHC at CERN.The data sources are relational databasesandvarious messaging systems. The projectprovidesavast amountof in-depth information including real-time data, historical trends and correlations in a user-friendly way.

  7. CMS OnlineWeb-Based Monitoring

    CERN Document Server

    Wan, Zongru; Chakaberia, Irakli; Lopez-Perez, Juan Antonio; Maeshima, Kaori; Maruyama, Sho; Soha, Aron; Sulmanas, Balys; Wan, Zongru

    2012-01-01

    For large international High Energy Physics experiments, modern web technologies make the online monitoring of detector status, data acquisition status, trigger rates, luminosity, etc., accessible for the collaborators anywhere and anytime. This helps the collaborating experts monitor the status of the experiment, identify the problems, and improve data-taking efficiency. We present the Web-Based Monitoring project of the CMS experiment at the LHC of CERN. The data sources are relational databases and various messaging systems. The project provides a vast amount of in-depth information including real time data, historical trend, and correlations, in a user friendly way.

  8. Monitoring of Grid scientific workflows

    NARCIS (Netherlands)

    Balis, B.; Bubak, M.; Łabno, B.

    2008-01-01

    Scientific workflows are a means of conducting in silico experiments in modern computing infrastructures for e-Science, often built on top of Grids. Monitoring of Grid scientific workflows is essential not only for performance analysis but also to collect provenance data and gather feedback useful

  9. Monitoring of Grid scientific workflows

    NARCIS (Netherlands)

    Balis, B.; Bubak, M.; Łabno, B.

    2008-01-01

    Scientific workflows are a means of conducting in silico experiments in modern computing infrastructures for e-Science, often built on top of Grids. Monitoring of Grid scientific workflows is essential not only for performance analysis but also to collect provenance data and gather feedback useful i

  10. Dashboard for the LHC experiments

    Science.gov (United States)

    Andreeva, J.; Belov, S.; Berejnoj, A.; Cirstoiu, C.; Chen, Y.; Chen, T.; Chiu, S.; Miguel, M. D. F. D.; Ivanchenko, A.; Gaidioz, B.; Herrala, J.; Janulis, M.; Kodolova, O.; Maier, G.; Maguire, E. J.; Munro, C.; Rivera, R. P.; Rocha, R.; Saiz, P.; Sidorova, I.; Tsai, F.; Tikhonenko, E.; Urbah, E.

    2008-07-01

    In this paper we present the Experiment Dashboard monitoring system, which is currently in use by four Large Hadron Collider (LHC)[1] experiments. The goal of the Experiment Dashboard is to monitor the activities of the LHC experiments on the distributed infrastructure, providing monitoring data from the virtual organization (VO) and user perspectives. The LHC experiments are using various Grid infrastructures (LCG[2]/EGEE[3], OSG[4], NDGF[5]) with correspondingly various middleware flavors and job submission methods. Providing a uniform and complete view of various activities like job processing, data movement and publishing, access to distributed databases regardless of the underlying Grid flavor is the challenging task. In this paper we will describe the Experiment Dashboard concept, its framework and main monitoring applications.

  11. Geophysical monitoring technology for CO2 sequestration

    Science.gov (United States)

    Ma, Jin-Feng; Li, Lin; Wang, Hao-Fan; Tan, Ming-You; Cui, Shi-Ling; Zhang, Yun-Yin; Qu, Zhi-Peng; Jia, Ling-Yun; Zhang, Shu-Hai

    2016-06-01

    Geophysical techniques play key roles in the measuring, monitoring, and verifying the safety of CO2 sequestration and in identifying the efficiency of CO2-enhanced oil recovery. Although geophysical monitoring techniques for CO2 sequestration have grown out of conventional oil and gas geophysical exploration techniques, it takes a long time to conduct geophysical monitoring, and there are many barriers and challenges. In this paper, with the initial objective of performing CO2 sequestration, we studied the geophysical tasks associated with evaluating geological storage sites and monitoring CO2 sequestration. Based on our review of the scope of geophysical monitoring techniques and our experience in domestic and international carbon capture and sequestration projects, we analyzed the inherent difficulties and our experiences in geophysical monitoring techniques, especially, with respect to 4D seismic acquisition, processing, and interpretation.

  12. Calibration and monitoring for crystal calorimetry

    CERN Document Server

    Zhu, Ren Yuan

    2005-01-01

    Crystal calorimetry provides excellent energy resolution in high energy and nuclear physics. The light output of heavy crystal scintillators, however, suffers from not negligible damage in radiation environment. A precision calibration and monitoring thus is crucial for maintaining crystal precision in situ. The performance of calibration and monitoring approaches used by BaBar, CLEO and L3 experiments are presented. The design and construction of a laser- based light monitoring system for CMS PWO calorimeter is also discussed.

  13. Bispectral Index Monitor

    Science.gov (United States)

    2004-01-01

    study confirmed 2 cases of intraoperative awareness in the BIS group and 11 cases in the standard practice group. This difference was statistically significant (P =.022). There were 36 reports of possible awareness that were not confirmed by the study group (20 patients in the BIS group and 16 in the standard practice group). Additionally, the results of small randomized controlled trials and prospective cohort studies show that, overall, BIS monitoring is relatively good at indicating the state of being alert; however, its algorithm does not accurately predict an unconscious state. BIS monitoring has low sensitivity for the detection of the state of being asleep, and it may show values higher than 60 in those already asleep. Therefore, an unknown percentage of patients will not be identified as being asleep and will receive anesthetics unnecessarily. Based on the literature review, the Medical Advisory Secretariat concludes the following: Prevention of awareness should remain a clinical decision for anesthesiologists to make based on their experience with intraoperative awareness in their practices. Although BIS monitoring may have a positive impact on reducing the incidence of intraoperative awareness in the general population, its negative impact on individual patients may overshadow this positive outcome. BIS monitoring is good at indicating an “alert” state, which is why it can reduce the incidence of intraoperative awareness; however, its algorithm does not accurately predict an “asleep” state. This means an unknown percentage of patients who are already asleep will not be identified because of falsely elevated BIS values. These patients will receive unnecessary dosage of anesthetics resulting in a deep hypnotic state. Adherence to the practice guidelines will reduce the risk of intraoperative awareness. PMID:23074459

  14. A Constructed Wetland: From Monitoring To Action.

    Science.gov (United States)

    Kowal, Dan

    1998-01-01

    Presents a water-quality monitoring project in a Denver school that has evolved into an experiment using a constructed wetland system to treat the acid-mine drainage from an abandoned gold mine. (PVD)

  15. Holter and Event Monitors

    Science.gov (United States)

    ... Share this page from the NHLBI on Twitter. Holter and Event Monitors Also known as ambulatory EKG; continuous EKG; EKG event monitors. Holter and event monitors are small, portable electrocardiogram devices ...

  16. Active Job Monitoring in Pilots

    Science.gov (United States)

    Kuehn, Eileen; Fischer, Max; Giffels, Manuel; Jung, Christopher; Petzold, Andreas

    2015-12-01

    Recent developments in high energy physics (HEP) including multi-core jobs and multi-core pilots require data centres to gain a deep understanding of the system to monitor, design, and upgrade computing clusters. Networking is a critical component. Especially the increased usage of data federations, for example in diskless computing centres or as a fallback solution, relies on WAN connectivity and availability. The specific demands of different experiments and communities, but also the need for identification of misbehaving batch jobs, requires an active monitoring. Existing monitoring tools are not capable of measuring fine-grained information at batch job level. This complicates network-aware scheduling and optimisations. In addition, pilots add another layer of abstraction. They behave like batch systems themselves by managing and executing payloads of jobs internally. The number of real jobs being executed is unknown, as the original batch system has no access to internal information about the scheduling process inside the pilots. Therefore, the comparability of jobs and pilots for predicting run-time behaviour or network performance cannot be ensured. Hence, identifying the actual payload is important. At the GridKa Tier 1 centre a specific tool is in use that allows the monitoring of network traffic information at batch job level. This contribution presents the current monitoring approach and discusses recent efforts and importance to identify pilots and their substructures inside the batch system. It will also show how to determine monitoring data of specific jobs from identified pilots. Finally, the approach is evaluated.

  17. Monitoring Knowledge Base (MKB)

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Monitoring Knowledge Base (MKB) is a compilation of emissions measurement and monitoring techniques associated with air pollution control devices, industrial...

  18. Modernizing the monitoring of Mass Storage systems

    CERN Document Server

    Terrien, Alexandre

    2016-01-01

    The monitoring of a system is essential to ensure its efficiency. On a computer system, this monitoring is partly done via the analysis of log messages. The monitoring of CASTOR, a mass-storage system responsible for the storage of 150Pb of scientific data at CERN, was being done with tools developed by the IT-ST-FDO section. Those tools recently encountered some performance limitations due to the increase in the quantity of data produced by CERN's experiments. In this paper, I will describe how I managed to modernize CASTOR's monitoring tools by leveraging services centrally managed by CERN's IT department.

  19. Monitoring the Digital Divide

    Energy Technology Data Exchange (ETDEWEB)

    Cottrell, Les

    2003-05-28

    It is increasingly important to support the large numbers of scientists working in remote areas and having low bandwidth access to the Internet. This will continue to be the case for years to come since there is evidence from PingER performance measurements that the, so-called, digital divide is not decreasing. In this work, we review the collaborative work of The Abdus Salam International Center for Theoretical Physics (ICTP) in Trieste, a leading organization promoting science dissemination in the developing world- and SLAC in Stanford, to monitor by PingER, Universities and Research Institutions all over the developing world following the recent ''Recommendations of Trieste'' to help bridge the digital divide. As a result, PingER's deployment now covers the real-time monitoring of worldwide Internet performance and, in particular, West and Central Africa for the first time. We report on the results from the ICTP sites and quantitatively identify regions with poor performance, identify trends, discuss experiences and future work.

  20. Technical infrastructure monitoring at CERN

    CERN Document Server

    Stowisek, Jan; Suwalska, Anna

    2006-01-01

    The Technical Infrastructure Monitoring system (TIM) is used to monitor and control CERN's technical services from the CERN Control Centre (CCC). The system's primary function is to provide CCC operators with reliable real-time information about the state of the laboratory's extensive and widely distributed technical infrastructure. TIM is also used to monitor all general services required for the operation of CERN's accelerator complex and the experiments. A flexible data acquisition mechanism allows TIM to interface with a wide range of technically diverse installations, using industry standard protocols wherever possible and custom designed solutions where needed. The complexity of the data processing logic, including persistence, logging, alarm handling, command execution and the evaluation of datadriven business rules is encapsulated in the system's business layer. Users benefit from a suite of advanced graphical applications adapted to operations (synoptic views, alarm consoles, data analysis tools etc....