PRODUCTION AND MARKET INFORMATION STRATEGY FOR FISHERFOLKS COOPERATIVES IN THE COASTAL COMMUNITIES OF ONDO STATE

OpenAIRE

Akegbejo-Samsons, Y.

2006-01-01

Information for agricultural and rural communities is a crucial tool in the fight against poverty in order to achieve food security. This paper presents the result of pilot fishnet initiative (FNI) of the Ilaje local government area of Ondo State. A model information network that provided data on fish production techniques and methodologies was established with the aim of networking all the fishers in the administrative area. Information on marketing and fish distribution were disseminated th...

Knowledge of acute kidney injury among nurses in two government hospitals in Ondo City, Southwest Nigeria

Directory of Open Access Journals (Sweden)

Oluseyi A Adejumo

2017-01-01

Full Text Available Adequate knowledge of acute kidney injury (AKI among all health-care providers is essential for early diagnosis and management to reduce the associated burden. This study determined the knowledge of AKI among nurses in two government hospitals in Ondo City, Southwest Nigeria. This cross-sectional descriptive study was carried out in two government hospitals in Ondo City using a self-administered pretested questionnaire that assessed knowledge of AKI and associated factors. A total of 156 respondents participated in the study. Majority were between 20 and 40 years of age and were females. Ninety-nine (63.5% had ≤10 years of nursing experience. A total of 106 (67.5% respondents had received formal lectures on AKI in the past. Only 12 (7.7% respondents had good knowledge of AKI, 98 (62.8% had fair knowledge, and the remaining 46 (29.5% had poor knowledge of AKI. There was a significant association between the knowledge of AKI and having received previous AKI lectures (P = 0.03, but knowledge was not associated with the years of nursing experience (P = 0.37. There was a significant association between having received previous AKI lecture and knowledge of AKI. We, therefore, recommend regular in-service training on AKI for practicing nurses.

Teachers'Skills in Identification and Management of Students'Talents in Ondo State Secondary Schools

Directory of Open Access Journals (Sweden)

M. A. Yusuf

2016-12-01

Full Text Available The study examined the teachers' skills in identification and management of secondary school students' talent in Ondo State. The study adopted a descriptive survey research design for the study. The population of the study com-prised 3462 secondary schools' teachers in Ondo Central Senatorial District while the sample consisted of 360 teachers. Multi-stage sampling technique was used to select the sample. The first stage was a simple random technique to select three Local Government Areas from six Local Government Areas in the District. Proportionate sampling technique was used to select 24 secondary schools from the three Local Government Areas selected. The last stage in-volved using proportionate stratified random sampling to select a total of 360 teachers. Data for the study were collected using questionnaire tagged Teachers Shills in Identifying Students' Talents Questionnaire (TSITQ.Data collected were analysed using frequency count and simple percentages. The results showed that the predominant skill used by teachers in identifying students' talents were Guidance and Counselling, Motivation, Creative teaching and Pedagogical. It was found out that motivational strategy (in form of gifts, prizes and scholarship was predominantly used by teachers in managing students' talents followed by independent study, creative teaching and pro-gramme planning. Based on the findings of the study it was therefore recommended that teachers should improve on their strategies such as independent study, creative teaching, individualised instructions and programme planning in managing secondary school students' talents.

Teachers’ Classroom management and Quality Assurance of Students’ Learning Outcome in Secondary Schools in Ondo State, Nigeria

OpenAIRE

AYENI, Adeolu Joshua

2017-01-01

Abstract. The study assessed teachers’ classroom management strategies, the level of teachers' classroom instructional tasks and determined the effect on students’ academic performance, and further examined the constraints in classroom management in secondary schools in Akure South Local Government Area of Ondo State, Nigeria. Descriptive survey and ex post facto research designs were adopted. Five research questions and two hypotheses were formulated to guide the study. The sample consisted ...

Extent of Parent-Teacher Association Involvement in the Implementation of Universal Basic Education Program in Primary Schools in Northern Senatorial District of Ondo State, Nigeria

Directory of Open Access Journals (Sweden)

Chidi Nnebedum

2018-05-01

Full Text Available Pupil’ absenteeism and lateness to school, dilapidated and shortage of relevant facilities in primary schools in the Northern Senatorial District of Ondo State seems to suggest lapses in parent-teacher association involvement in school affairs. This prompted the researchers to ascertain the extent of parent-teacher association (PTA involvement in the implementation of universal basic education program in primary schools in the Northern Senatorial District of Ondo State. Three research questions guided the study and three null hypotheses were tested. The descriptive survey research design was adopted for the study. The population of the study was comprised of all 250 head teachers and all PTA members at all 250 primary schools in the Northern Senatorial District. Multiple stage sampling technique was used to sample 205 respondents made up of 75 head teachers and 130 PTA members. The researchers developed an instrument titled “Parent-Teacher Association Involvement in School Questionnaire (PTAISQ” which was used for data collection. The instrument was validated by three experts. The reliability of the instrument was ascertained using Cronbach alpha and it yielded an overall reliability coefficient value of .76. Mean and standard deviation were used to answer the research questions, while t-test was used to test the null hypotheses at .05 level of significance. The findings of the study revealed among others that the extent of PTA involvement in maintenance of facilities in the implementation of universal basic education program in primary schools in the Northern Senatorial District of Ondo State was high. Based on the findings, recommendations were made and conclusions were drawn.

Improving learning infrastructure and environment for sustainable quality assurance practice in secondary schools in Ondo State, South-West, Nigeria

OpenAIRE

Ayeni, Adeolu Joshua; Adelabu, Modupe A.

2012-01-01

The current study examines the state of learning environment and infrastructure, together with their effects on teaching and learning activities and the extent to which they are being maintained. The study uses a descriptive survey design paradigm. Respondents consist of 60 principals and 540 teachers that were randomly selected using the multi-stage sampling technique from a pool of 599 public secondary schools in the Ondo State, South-West, Nigeria. Data were collected using the Learning En...

Investigating Differential Learning Outcomes of Students in Physics Using Animation and Textual Information Teaching Strategies in Ondo State Secondary School

Directory of Open Access Journals (Sweden)

Blessing Eguabor

2017-06-01

Full Text Available BackgroundThe study investigated the main effects of animation information and textual information on students'performance and improving students' attitude towards physics.Material and methodsThe study adopted the pre-test post-test control group design. The population was made up of SSS 2 students inOndo State. Three Local Government Areas were randomly selected from the 18 Local Government Areas ofOndo State. Simple random technique was used to select three schools in the selected Local Government Areas.The schools were randomly assigned to two experimental groups namely animation and, textual informationstrategy and one control group. Two instruments were used for the study.ResultsOne-way Analysis of Variance (ANOVA, Scheffe Post-Hoc pair-wise comparison Analysis, and two-way Analysisof Variance was used. The results showed that there was a significant main effect of animation and textual strategieson students performance in physics. The results also showed that there was a significant difference in the post testattitudinal score of students' exposed to the strategies with the effectiveness in the order of animation, textual, andconventional strategiesConclusionsThe study concluded that computer- based instruction such as animation and textual strategies could enhancelearning outcomes in Physics in senior secondary school irrespective of students' sex.

Pattern of leisure-time physical activity involvement of Academic and non-Academic staff in tertiary Institutions in Ondo State, Nigeria

OpenAIRE

Ajibua M.A.; Alla J.B

2012-01-01

Leisure signifies individual’s choice to spend his/her discretionary time fulfilling certain interest or needs or performing a gratifying experience for the sake of wellness or personal development. The aim of this study was to look into the pattern of leisure-time physical activity involvement among academic and non-academic staff in tertiary institution in Ondo State. For the purpose of the study, 40 academic and 40 non-academic staff were selected from the five Government-owned tertiary in...

A McOndo Writer's Take on Literature in the Era of Audiovisual and Digital Communication: The Case of Alberto Fuguet's "Las Peliculas de mi vida"

Science.gov (United States)

Maier, Linda S.

2011-01-01

Alberto Fuguet, one of the leaders of the McOndo writers who seek cultural direction from the United States and exploit mass-media formulas, is a polarizing figure in contemporary Latin American culture. His most recent full-length novel, the semi-autobiographical "Las peliculas de mi vida" (2003), has led many to conclude that Fuguet is simply a…

INTER-SEASONAL DYNAMICS OF VEGETATION COVER AND SURFACE TEMPERATURE DISTRIBUTION: A CASE STUDY OF ONDO STATE, NIGERIA

Directory of Open Access Journals (Sweden)

H. A. Ibitolu

2016-06-01

Full Text Available This study employs Landsat ETM+ satellite imagery to access the inter-seasonal variations of Surface Temperature and Vegetation cover in Ondo State in 2013. Also, air temperature data for year 2013 acquired from 3 synoptic meteorological stations across the state were analyzed. The Single-channel Algorithm was used to extract the surface temperature maps from the digital number embedded within the individual pixel. To understand the spatio-temporal distribution of LST and vegetation across the various landuse types, 200 sample points were randomly chosen, so that each land-use covers 40 points. Imagery for the raining season where unavailable because of the intense cloud cover. Result showed that the lowest air temperature of 20.9°C was in January, while the highest air temperature of 34°C occurred in January and March. There was a significant shift in the vegetation greenness over Ondo State, as average NDVI tend to increase from a weak positive value (0.189 to a moderate value (0.419. The LULC map revealed that vegetation cover occupied the largest area (65% followed by Built-up (26%, Swampy land (4%, Rock outcrop (3% and water bodies (2%. The surface temperature maps revealed that January has the lowest temperature of 10°C experienced in the coastal riverine areas of Ilaje and Igbokoda, while the highest temperature of 39°C observed in September is experienced on the rocky grounds. The study also showed the existence of pockets of Urban Heat Islands (UHI that are well scattered all over the state. This finding proves the capability and reliability of Satellite remote sensing for environmental studies.

A Note on the Spatio Temporal Variations in the Temperature and Relative Humidity over Akure, Ondo State, Nigeria

Science.gov (United States)

Eludoyin, A. O.; Akinbode, O. M.; Archibong, E. O.

2007-07-01

This study was carried out in one of the Administrative State Capitals in the southwestern part of Nigeria. Its aim is to serve as a baseline data for highlighting the effect of spatial distribution of settlements, population, and socioeconomic activities on urban air temperature and relative humidity. The main objective of the study is to assess the impact of urban growth on the microclimate of the administrative city. Temperature and relative humidity data from 1992 to 2001 were obtained from the three existing meteorological stations in Akure, the Administrative Capital of Ondo State, Nigeria, namely the Federal Ministry of Aviation, Akure Airport station (FMA), Federal University of Technology, Akure (FUTA) and the Federal School of Agriculture (SOA). Air temperature and relative humidity measurements along primary roads and in the built up areas were obtained from seventeen stations, using sling psychrometer. The data were subsequently analysed for spatial and temporal variations. The results obtained indicated that while the maximum, average and minimum temperatures showed significant annual variations, the spatial variations among the existing meteorological stations were not significant. The city is characterized by increasing annual mean temperatures whose maximum was significantly higher than that of Ondo town — another important town within the state. The annual mean temperatures ranged between 26.2°C and 30.4°C. Minimum and maximum temperatures varied from 12.3°C to 26°C and 22.5°C to 39.6°C, respectively while the relative humidity ranged between 27.5% and 98.2%. Urban `heat island' intensity was exhibited around central business district of the Oba market. 2007 American Institute of Physics

Determination of some heavy metals in oreochromis niloticus, clarias gariepinus and synodontis spp from the coastal water of Ondo State, Nigeria

International Nuclear Information System (INIS)

Asaolu, S.S.

2002-01-01

Some heavy metals (Pb, Ni, Fe, Cu, Zn, Cd, Co, Mn, and Cr) were determined in Oreochromis niloticus, Clarias graiepinus and Synodontis spp obtained from the coastal water of Ondo State. All metals examined and detected in all fish samples. Iron, manganese and cadmium were found to be the most abundant metals in the fish samples with an average values of 35.8, 31.3, and 12.5 mg kg-1 respectively. Except for manganese, iron and cadmium, Syndrontis spp has the highest concentration for virtually all the metals under examination. (author)

Pattern of leisure-time physical activity involvement of Academic and non-Academic staff in tertiary Institutions in Ondo State, Nigeria

Directory of Open Access Journals (Sweden)

Ajibua M.A.

2012-01-01

Full Text Available Leisure signifies individual’s choice to spend his/her discretionary time fulfilling certain interest or needs or performing a gratifying experience for the sake of wellness or personal development. The aim of this study was to look into the pattern of leisure-time physical activity involvement among academic and non-academic staff in tertiary institution in Ondo State. For the purpose of the study, 40 academic and 40 non-academic staff were selected from the five Government-owned tertiary institutions in the state using convenience sampling techniques. Thus, total respondents were 400. The instrument employed in the study was a structured and validated questionnaire, Pattern of Leisure Involvement Questionnaire (PLIQ to collect information on the pattern of leisure-time physical activity involvement among staff. The reliability test of the instrument was carried out by obtaining Cronbach’s Alpha statistic which is a measure of how reliable and consistent the instrument was. The result showed that Cronbach’s Alpha was 0.896. Since the value was above 0.5 which was the average, it showed that the research instrument was reliable and consistent. The information gathered from the subjects through the questionnaire was analyzedusing descriptive (mean, standard deviation and standard error and inferential statistics (t-test. The findings showed that academic and non-academic staff in tertiary institutions in Ondo State participate in leisure-time physical activity differently. It thus suggested that variety of leisure-time physical activities must be provided for members of tertiary institutions so that some groups will not be taken care of, while others will be isolated.

Radiological study of brackish and fresh water food samples in Lagos and Ondo states, southwestern Nigeria

International Nuclear Information System (INIS)

Ojo, T.J.; Ojo, O.C.

2007-01-01

Measurement of the average radioactivity concentration in brackish and fresh water food samples in Lagos and Ondo States of Nigeria was carried out using a very sensitive gamma spectroscopic system consisting of a 76 mm x 76 mm Nal (TI) scintillation detector coupled to a computerized ACCUSPEC installation. All the radionuclide detected are traceable to the naturally occurring 4 ''0K and ''2''3''2Th. The average concentrations of ''2''3''8U and ''2''3''2Th were found to be higher in brackish water food samples, 50.92±7.04 Bq/kg and 24.60± 6.47 Bq/kg respectively. The average concentration of ''4''0K was found to be higher in food samples got from freshwater, 738.94±84.81Bq/kg

Knowledge, Attitude and Perception of Ebola Virus Disease among Secondary School Students in Ondo State, Nigeria, October, 2014.

Science.gov (United States)

Ilesanmi, Olayinka; Alele, Faith Osaretin

2016-03-04

The first case of Ebola Virus Disease (EVD) in Nigeria was imported on 20th July 2014, by an air traveller. On 8th August, 2014, WHO declared the Ebola outbreak in West Africa a Public Health Emergency of International Concern (PHEIC). This study aimed at assessing the knowledge, perception and attitude of secondary school students towards EVD and adopting disease preventive behaviour. A descriptive cross sectional study of 440 students from a mixed secondary school in Owo, Ondo State was done. Data was collected in October 2014 when Nigeria was yet to be declared EVD free.Simple random sampling was used to select the school while Systematic random sampling was used in the selection of participants. A semi-structured, interviewer administered questionnaire was used to collect data. Data was analyzed with SPSS version 21. Descriptive statistics and Chi-square test were done, level of statistical significant was 5%. Mean age of respondents was 13.7±1.9 years. Females were 48.2%. Most of the respondents had heard of Ebola Virus Disease (95.4%). Female respondents (51.3%), those who were 15 years and above (51.1%) and in the senior class (54.1%), and had good general knowledge of EVD and across all domains. Being in the senior secondary class and seeking for health care in the hospital were positively associated with good general knowledge (p-value: 0.029, and <0.001 respectively). Three commonest modes of spread of EVD mentioned were contact between infected animals and men (74.8%), touching body fluids of a person who is sick of EVD (57.0%), and contact (55.2%). The top three signs of EVD mentioned were abnormal bleeding from any part of the body (56.10%), vomiting (47.0%) and fever (42.3%). Our results revealed suboptimal EVD-related knowledge, attitude and practice among the students. Promotion of health messages and training of students on prevention of EVD to effectively control past and future outbreaks of EVD in Nigeria was immediately initiated in schools in

Climate change adaptation: a panacea for food security in Ondo State, Nigeria

Science.gov (United States)

Fatuase, A. I.

2017-08-01

This paper examines the likely perceived causes of climate change, adaptation strategies employed and technical inefficiency of arable crop farmers in Ondo State, Nigeria. Data were obtained from primary sources using a set of structured questionnaire assisted with interview schedule. Multistage sampling technique was used. Data were analyzed using the following: descriptive statistics and the stochastic frontier production function. The findings showed that majority of the respondents (59.1 %) still believed that climate change is a natural phenomenon that is beyond man's power to abate while industrial release, improper sewage disposal, fossil fuel use, deforestation and bush burning were perceived as the most human factors that influence climate change by the category that chose human activities (40.9 %) as the main causes of climate change. The main employed adaptation strategies by the farmers were mixed cropping, planting early matured crop, planting of resistant crops and use of agrochemicals. The arable crop farmers were relatively technically efficient with about 53 % of them having technical efficiency above the average of 0.784 for the study area. The study observed that education, adaptation, perception, climate information and farming experience were statistically significant in decreasing inefficiency of arable crop production. Therefore, advocacy on climate change and its adaptation strategies should be intensified in the study area.

Plankton and Macrobiota Composition and Diversity of Three Tropical Freshwaters Rivers in Ogun and Ondo States, Southwest Nigeria

Directory of Open Access Journals (Sweden)

Taofikat Abosede ADESALU

2016-06-01

Full Text Available Three different rivers in Ogun and Ondo states were investigated for both micro and macro-biota of the water bodies. Several physical and chemical properties of these rivers were determined. The pH value of the studied water bodies was essentially neutral with salinity values between 0.02 - 4.0‰. Microalgae communities were represented by three divisions: Cyanophyta, Bacillariophyta and Chlorophyta at Oluwa and Ifara Rivers (Ondo state, while at Ibefun River (Ogun state, five divisions: Cyanophyta, Bacillariophyta, Chlorophyta, Euglenophyta and Pyrrhophyta were identified. Diatoms dominated these water bodies, with Navicula radiosa Kutz. at Ifara River, Fragilaria sp. in Oluwa River, while out of 90 algal taxa identified in Ibefun river, 64 were diatoms species belonging to 26 genera, with Melosira sp. and Synedra sp. recording the highest numbers of cell count. Dinoflagellates recorded only Peridinium sp. while Phacus orbicularis Hubner and Trachelomonas sp. dominated the euglenoids. For the zooplankton composition at Ibefun, rotifers (75.95% were represented by Brachionus sp., which recorded 62.03%, and Gastropus sp. with 13.92% of the total zooplankton, thus dominated the spectrum, while the copepod recorded 22.78% of the total organisms, with Copilia sp. and Euchirella sp. having 8.86% each. The macrobenthic invertebrates were represented by 3 taxa, belonging to 3 groups, with the dominant group Insecta accounted for 57% of the total individuals (7 individuals/m2, while Oligochaeta and Hirudinea accounted for 29% and 14% respectively of the total individuals at Oluwa and Ifara Rivers. At Ibefun River, the macrobenthic invertebrates were represented by 5 taxa, belonging to 3 groups, Bivalves, Oligochaeta and Insecta, with bivalves being the dominant group (51.7% of the total individuals, as 64 individuals/m2, while Oligochaeta and Insecta accounted for 26.6% and 21.9% respectively of the total individuals. The dominant taxon, Macoma cumana

Adverse reactions from community directed treatment with ivermectin (CDTI for onchocerciasis and loiasis in Ondo State, Nigeria

Directory of Open Access Journals (Sweden)

O.A Otubanjo

2008-12-01

Full Text Available Onchocerciasis is an endemic disease in Ondo state, Nigeria. Community directed distribution of ivermectin is currently on-going in some local government areas of the state. Randomly selected persons (2 331 males and 2 469 females were interviewed using a modified rapid assessment procedure for Loa loa (RAPLOA to assess community directed treatment with ivermectin. The retrospective study evaluated the coverage, impacts and adverse reactions to the drug treatment. A questionnaire was administered by house-to-house visit in six local government areas, implementing community directed treatment with ivermectin (CDTI in this bioclimatic zone. A total of 2,398 respondents were reported to have participated in the treatment. The overall ivermectin coverage of 49.96% was recorded (range 0 - 52% in different communities. Adverse reactions from ivermectin administration were experienced in 38% of individuals. Diverse adverse reactions experienced included predominantly itching (18.50%; oedema, especially of the face and the limbs (8.2%; rashes (3.4% and body weakness (2.4%. Expulsion of intestinal worms occurred in 0.96% of the respondents. The occurrence of adverse reactions in relation to age categories was statistically significant. Neither fatal nor severe adverse reactions were reported by respondents. Significantly, despite experienced adverse reactions, continued participation, acceptability and compliance to ivermectin treatment was expressed by the various communities. This attitude is in consonance with the African Programme for Onchocerciasis Control (APOC objectives. Rev. Biol. Trop. 56 (4: 1635-1643. Epub 2008 December 12.La oncocercosis es endémica en el estado Ondo, Nigeria. Se seleccionaron 4 800 personas al azar para evaluar con encuesta retrospectiva la cobertura, efectos y reacciones al tratamiento farmacológico con ivermectina administrado por la misma comunidad. La cobertura global de ivermectina fue 50 % con reacciones adversas en

Job Satisfaction and Work Performance of Public Secondary School Teachers In Akoko North West Local Government Area Of Ondo State

Directory of Open Access Journals (Sweden)

Aroge Stephen Talabi

2016-08-01

Full Text Available The study examined the relationship between job satisfaction and work performance of secondary school teachers in Akoko North West Local Government Area of Ondo-State, Nigeria. The study population consisted of all secondary school teachers, while two hundred of them were randomly selected for the study. Regular payment of salary, opportunities for promotion, rapport with school authority, in-service training, job security, career prospect and retirement benefits were the variables considered. The questionnaire titled “Workers Opinion Survey Inventory (WOSI” and the Productivity Rating Scale (PRS which was in line with Annual Performance Evaluation Report (APPER was used to obtain information for the study. The data was analyzed using Pearson Product Correlation Moment.  One of the recommendations made include the onward review of policies, remuneration and work conditions of teachers in the public secondary schools in Nigeria for optimum productivity.

Enterpreneurial Empowerment of People with Special Needs in Ondo and Osun States,Nigeria

Directory of Open Access Journals (Sweden)

Eyitayo Olufunmilayo Akinyemi

2016-11-01

Full Text Available This paper examined the motivational factors for  entrepreneurial empowerment of people with special needs, and determined the level of knowledge, skills, attitudes and competences that are necessary to become self-employed and contribute to individual growth and societal development rather than living in poverty, liabilities as beggars along the roads in Ondo and Osun states, Nigeria. Exploratory survey was adopted, using interviews and focus group discussion. The study revealed that most deaf and dumb in the societies who are involved in entrepreneurial skills development are cobblers, dry cleaners, tailors, bricklayers, carpenters, and hair dressers; while some disabled are into music, typing, teaching and trading. At the same time many are still depending on members of the society for survival. Many disabled are not motivated into engaging in entrepreneurial activities as the attitude of the society towards them does not indicate these people could be useful in different entrepreneurial activities of their abilities, while some families use their disabilities as sources of income. It is therefore recommended that parents should understand that no matter the nature of their children’s disability, individual is useful in one area or the other; people with special needs should be encouraged to engage themselves in entrepreneurial skills development and establish them after graduation. Members of the society and the government in particular should create avenues to identify areas where each disabled is gifted, develop them to be useful for themselves and the development of the society.

Effect of thermal environment on the temporal, spatial and seasonal occurrence of measles in Ondo state, Nigeria

Science.gov (United States)

Omonijo, Akinyemi Gabriel; Matzarakis, Andreas; Oguntoke, Olusegun; Adeofun, Clement Olabinjo

2012-09-01

We investigated the temporal and spatial dynamics, as well as the seasonal occurrence of measles in Ondo state, Nigeria, to better understand the role of the thermal environment in the occurrence of the childhood killer disease measles, which ranks among the top ten leading causes of child deaths worldwide. The linkages between measles and atmospheric environmental factors were examined by correlating human-biometeorological parameters in the study area with reported clinical cases of measles for the period 1998-2008. We also applied stepwise regression analysis in order to determine the human-biometeorological parameters that lead to statistical changes in reported clinical cases of measles. We found that high reported cases of measles are associated with the least populated areas, where rearing and cohabitation of livestock/domestic animals within human communities are common. There was a significant correlation ( P measles and human-biometeorological parameters except wind speed and vapour pressure. High transmission of measles occurred in the months of January to May during the dry season when human thermal comfort indices are very high. This highlights the importance of the thermal environment in disease demographics since it accounted for more than 40% variation in measles transmission within the study period.

Female genital mutilation as sexual disability: perceptions of women and their spouses in Akure, Ondo State, Nigeria.

Science.gov (United States)

Owojuyigbe, Michael; Bolorunduro, Miracle-Eunice; Busari, Dauda

2017-05-01

Disability encompasses the limitations on an individual's basic physical activities, and the consequent social oppressions such individual faces in society. In this regard, the limitation on the use of some parts of the genitals in a patriarchal system is considered a form of disability. This paper describes the perceptions of and the coping mechanisms employed by affected couples dealing with the consequences of female genital mutilation (FGM) as a form of sexual disability. Cultural Libertarianism was employed as a theoretical framework. The paper presents the results of a descriptive cross-sectional study conducted in Akure, Ondo State, Nigeria, with 10 male and 12 female respondents purposively selected through a snowball sampling for in-depth interviews. The findings present the justifications provided for the practice of FGM, and victims' perceptions of how it affects their sexual relations. Furthermore, it highlights coping strategies employed by affected women and their spouses. The study shows that the disabling consequence of FGM is largely sexual in nature, leading to traumatic experiences and negative beliefs about sex, and requiring a myriad of coping strategies employed by the disabled women, and their spouses, which may have its own implications for marital and sexual bliss.

A retrospective study on fourteen year hemoglobin genotype variants recorded at five government hospitals in Akure, Ondo State, Southwestern Nigeria

Directory of Open Access Journals (Sweden)

Akeem Akinboro

2016-10-01

Results and conclusion: Six hemoglobin genotypes were identified as HbAA, HbAS, HbAC, HbSS, HbSC and HbCC. The overall average values of their prevalence in decreasing order were HbAA (88.11% > HbAS (10.23% > HbAC (0.78% > HbSS (0.72%, HbSC (0.15% and HbCC (0.01%. There was a steady increase in the number of people who visited the hospitals for hemoglobin genotype determination throughout the years covered in this investigation, as the proportion of abnormal hemoglobin genotypes to the normal HbAA tremendously increased in the last four years (2010–2013. This suggests the possibility of many other residents in the capital city of Ondo state carrying the abnormal forms of hemoglobin genotype, and calling for more efforts in the area of genetic counseling. The gene frequencies of A, S, and C were 0.91, 0.08 and 0.01, respectively. The prevalence of HbAA in this study has been the highest reported in the Southwest and Nigeria as a whole.

EFFECTS OF CLIMATE CHANGE ON POULTRY PRODUCTION IN ONDO STATE, NIGERIA

Directory of Open Access Journals (Sweden)

G.B. Adesiji

2013-02-01

Full Text Available The study assesses the effects of climate change on poultry production in Ondo State, Nigeria. Eighty three (83 poultry farmers were interviewed to elicit relevant information in line with the objectives of the study. Descriptive statistics and inferential statistical tools were used for data analysis. Findings revealed that majority (93.3% of the respondents are aware of climate change, 78%, 98.8% and 86.7% of the respondents agreed that temperature fluctuation, increased in sunshine intensity and global warming has a negative effects on poultry production, 72.4% of the respondents agreed that prices of feed grains are usually high in hot and dry seasons which may affect cost of production and number of birds to raise for egg and meat production in the farm, 73.5% of the respondents agreed that climate change has effect on feed grain availability, this implies that high temperature and low rainfall are climatic factors that affect general grain harvest, their supply to the market and ultimately cost of poultry production. the findings further revealed that 94% of the respondents agreed that climate change affects egg and meat production pattern and 95.2% of the respondents agreed that moist climatic conditions encouraged the distribution and development of diseases. Infrential statistics shows that there is a significant relationship between respondents' socio-economic characteristics and perception of poultry farmers on effects of climate change on poultry production since p > 0.05 (r = 0.454, p= 0.001, the findings also shows that there is a significant relationship between socio-economic characteristics of respondents and their level of awareness of climate change since the p > 0.05 (r = 0.652, p = 0.001. it is recomended extension agents and other development agencies need to educate the poultry farmers more about the effects posed by climate change on poultry production and intensify awareness campaign to poultry farmers on how to reduce

The role of middlemen in fish marketing in Igbokoda fish market, Ondo-state, south western Nigeria

Directory of Open Access Journals (Sweden)

F.O. Agbebi

2012-12-01

Full Text Available The study on the role of middlemen in fish marketing was carried out in Igbokoda fish market in Ondo State, Nigeria with the use of structured questionnaire and personal interview to know the various activities in the fishing community and to be able to examine the socio-economic activities and characteristics of the fish marketers, the challenges in the market, the marketing procedures, the role middlemen plays and structures encountered in the fish business using descriptive analysis, such as the use of table, frequency, counts, mean and percentage. From this study, it was discovered that majority (42% of the respondents were within the age group of 31-40 years, thus indicating that most of them are within the economically active population. Majority of the marketers were involved in co-operative societies while only 10% were not involved in any co-operative society, which on the other hand indicate high level of rural poverty in the fishing community. 35% of the respondents have only one middleman, 22% have 2 middlemen and 38% of the respondents have 3 middlemen which indicate that their profit margin reduced as the number of middlemen increased. Fish sales in bulk and unit were observed in the area. Fish marketing, challenges and benefits that can be derived from it was also considered as well as facilities as a way of strengthening fish marketing structure by improving the bargaining power of traders and increasing the profit margin.

The effect of Ebola Virus Disease outbreak on hand washing among secondary school students in Ondo State Nigeria, October, 2014.

Science.gov (United States)

Ilesanmi, Olayinka Stephen; Alele, Faith Osaretin

2015-01-01

Hand washing with soap and water is one of the cheapest, most effective ways of limiting the spread of Ebola Virus Disease (EVD). Despite its importance the prevalence of hand washing was low before the EVD outbreak in Nigeria. This study aimed at determining the factors associated with improved hand washing practices following the EVD outbreak. A descriptive cross sectional study of 440 students from a secondary school in Owo, Ondo State was done. Data was collected in October 2014 when Nigeria was yet to be declared EVD free. Systematic random sampling was used. A semi-structured, interviewer administered questionnaire was used. Data was analysed with epi info version 7, descriptive statistics were done, Chi square test was used for the assessment of significant associations between proportions. Determinants of good hand washing practices was identified using logistics regression analysis at 5% level of significance. Of 440 respondents, mean age was 13.7±1.9 years. Females were 48.2%. Only 4.6% have never heard of Ebola Virus Disease.Level of hand washing with soap and water improved by62.6%. Significant improvement in hand washing was in 75.8% of those who heard through social media (p Newspaper readers(p schools.

Effect of Carbon and Nitrogen Sources on Polygalacturonase Production by Trichoderma viride (BITRS-1001 Isolated from Tar Sand in Ondo State, Nigeria

Directory of Open Access Journals (Sweden)

Ogunmolu, F. E.

2011-01-01

Full Text Available The effects of the various carbon and nitrogen substrates on the growth and polygalacturonase activity of Trichoderma viride (BITRS-1001 isolated from the tar sand deposit in Gbelejuloda-Irele Ondo State, Nigeria were investigated in submerged cultivation at 30 °C ± 2 °C. The commercial carbon and nitrogen substrates included sucrose, fructose, starch, maltose, lactose and peptone, sodium nitrate, urea and casein respectively. All the carbon substrates used supported the growth of T. viride (0.566 to 0.156 g/50 mL of culture medium with starch supporting the highest biomass yield and sucrose the least biomass yield. Maximum polygalacturonase activity of 3033 U/mL was recorded in maltose medium. Maximum biomass yield on the nitrogen sources was observed in the organic nitrogen namely peptone and casein with values not significantly different from each other at p ≤ 0.05. In the determination of the crude enzyme activity on the nitrogen sources, maximum polygalacturonase activity of 12,400 U/mL was recorded in peptone medium. Hence, a careful manipulation of these nutrient substrates could help to optimise the production of this enzyme on a large scale.

CLINICIAN SENSITIZATION ON INTEGRATED DISEASE SURVEILLANCE AND RESPONSE IN FEDERAL MEDICAL CENTRE OWO, ONDO STATE, NIGERIA, 2016

Directory of Open Access Journals (Sweden)

Olayinka Stephen Ilesanmi

2017-06-01

Full Text Available Background: For effective Integrated Disease Surveillance and Response (IDSR all health care workers involvement is required. Most trainings have often neglected the clinicians. Aim: This study aimed to identify gaps requiring capacity building in preventing infectious disease outbreak among health care workers in Federal Medical Centre, Owo, Ondo State. Methods: A cross sectional study of clinicians at the Federal Medical Centre, Owo was done. Data was collected using semi structured interviewer administered questionnaire. Data collected were analysed with SPSS version 21. Summary statistics was conducted to identify training need requirements. Results: The mean age of participant was 43 ± 5.9 years, 14(70% were male. Respondents who have worked for 10 years and above were 12(60%. In all, 5(25% respondent understood disease surveillance to be systematic collection of data and analysis in order to prevent diseases. Regarding respondent’s knowledge of notifiable diseases. Only 4(20% of the respondents knew malaria as a notifiable disease, Cholera knew by 11(55%, Ebola by 15(75% and Lassa by 13(65%. The main factor identified to be affecting prompt disease notification in Federal Medical Centre, Owo was lack of adequate training 12(60% while communication gap was identified by 7(35%. In all, 18(90% felt they do not know all that they needed about disease surveillance. Conclusion: Rapid notification of infectious diseases is essential for prompt public health action and for monitoring of disease trends. Trainings that will improve the level of knowledge of clinician and communication channels will improve disease surveillance and notification.

Analysis of Traffic Noise along Oyemekun - Oba-Adesida Road Akure Ondo State Nigeria

Directory of Open Access Journals (Sweden)

O. J Oyedepo

2013-03-01

Full Text Available The primary aim of the research is to quantify and analyze the traffic noise emissions along Oba-Adesida –Oyemekun Road. Measurements of noise were recorded in decibel (dBA using digital sound level meters (IEC651 Type 2. While, the traffic volume and spot speed were obtained using cine –camera at six selected locations namely Alagbaka(L1, Biological Garden(L2, Adegbola(L3, Ondo Bye Pass(L4, Ilesha Garage(L5 and FUTA junction(L6 along ObaAdesida- Oyemekun road during the peak period(7:30am -8:30 am & 4:00pm-5:00pm and off peak period(11:30pm- 12:30pm, repeated 3-5 times to account for time-fluctuation of these variables. All measurements were taken on a weighting frequency network, at a height of about 1.5m from the ground level. The vehicles were divided into five categories namely Cars, buses, motorcycles,2-axle load, and 3-axle loads; and were converted into “Passenger Car Units” (PCU by multiplying with recommended factors in accordance with Nigerian Federal Highway Capacity Manual 2006.The average L10(dBA are 72.8, 73.8, 73.4, 74.4, 73.9, and 75.0dBA ; while average combine sound pressure level(SPL in dBA are 76, 77, 78, 78, 77, and 78dBA for L1, L2, L3, L4, L5,and L6 respectively. Findings indicated that traffic generated noise pollution is at or above, the standard outdoor limits in most locations and area can adversely affect the welfare activities. The present study revealed that the study area is getting noisier due to high traffic density and lack of traffic management, practical action to limit and control the exposure to environmental noise are essential. However, road traffic noise by treatments at source (such as to reduce engine noise, exhaust pipe noise etc. is to be encouraged as the principal method of control. The techniques include road design, the management of traffic flow and the use of screens and barriers.

Biomagnification of some heavy and essential metals in sediments, fishes and crayfish from Ondo State coastal region, Nigeria

International Nuclear Information System (INIS)

Asaolu, S.S.; Olaofe, O.

2005-01-01

The bio magnifications levels of some essential (Fe, Zn, Cu) and toxic metals (Pb, Ni, Cd, Cr, Co, Mn) were determined in sediments, three kinds of fish (Oreochromis niloticus, Synodonthis sp., and Clarias gariepinus) and crayfish from the Ondo State coastal region. The metal bio magnification in the fish and crayfish was several times greater than in water, while that in the sediments was several thousand-folds greater than in both the organisms and water. Among the metals examined in water, Fe was the most abundant with average values of 146.7 and 74.3 mg/1, respectively, for wet and dry seasons, while Co was the least with average values of 2.4 and 1.6 mg/1. In the sediments, concentrations of Pb, Ni, Fe, Cr, Co and Mn in the wet season were relatively higher than those obtained for the dry season. Fe with an average of 50.9 mg/kg in C, gariepinus was the most abundant metal in the fish samples, while Cu with an average value of 0.3 mg/kg in O. niloticus was the least. The metal bio magnification for most of the metals for both seasons was found to vary widely from one location to the other. This was confirmed by the coefficient of variation that ranged from 31% to 144% and 29% to 130% in the wet and dry seasons, respectively. The present study has shown that fish, crayfish and sediments can be used to monitor the pollution level of metals in the Nigerian coastal water. (author)

Primary health care workers' views of motivating factors at individual, community and organizational levels: a qualitative study from Nasarawa and Ondo states, Nigeria.

Science.gov (United States)

Bhatnagar, Aarushi; Gupta, Shivam; Alonge, Olakunle; George, Asha S

2017-04-01

Current efforts to motivate primary health workers in Nigeria focus on better financial incentives, and the role of other motivating factors has received less attention. The aim of this study is to explore individual and organizational determinants, their interactions and effects on motivation. Exploratory qualitative research, involving semi-structured interviews with 29 primary health workers (doctors, nurses, midwives and community health workers), was conducted in Nasarawa and Ondo states in Nigeria. Nine key informant interviews were conducted with government officials. Interviews were digitally recorded, transcribed and coded. Thematic analysis was conducted to identify common themes, as well as unique narratives. Results from this study suggest that health workers are motivated by individual (vocation, religion, humanity and self-efficacy) and organizational (monetary incentives, good working environment) factors and community recognition. Supervision and leadership provided by the officer in charge as compared with that by external agencies appeared to have a positive effect on motivation. Policy makers and donor agencies should take into account a broader range of factors while designing strategies to motivate the health workforce. The study also underscores how officer in charges with enhanced skills are likely to motivate health workers by creating a more supportive environment. Copyright © 2016 John Wiley & Sons, Ltd.

TropJrnal Vol 32 No 1

African Journals Online (AJOL)

Mr Olusoji

2002-07-11

Jul 11, 2002 ... 1Department of Obstetrics and Gynaecology, State Specialist Hospital, Ondo, Ondo State, Nigeria ... hospitals. Management of diabetic pregnancy, intrapartum management of foetuses presenting by breech, and vaginal birth after caesarean section will .... between categorical variables in the contingency.

Nutritional status and intelligence quotient of primary schoolchildren in Akure community of Ondo State, Nigeria.

Science.gov (United States)

Ijarotimi, O S; Ijadunola, K T

2007-05-01

A cross-sectional survey was conducted among 402 children (10-15 years) randomly selected from twelve public and private primary schools in Akure community of Ondo State, Nigeria. Self-administered questionnaire was used to collect information on children's demographic features and parent's socio-economic characteristics. The subject's weight, height, height-for-age and weight-for-height z-score were measured and determined respectively. Raven Standard Progressive Matrices consisted of 60 questions was administered in a quiet classroom within 60 minutes to assess intelligence quotient (IQ) of the children. The means of measured parameters were: age, 11.5 +/- 0.08 years; weight, 33.3 +/- 0.35 kg; height, 1.4 +/- 0.0 m; height-for-age z-score, -0.003 +/- 0.04; weight-for-height z-score -7.2E-7 +/- 0.1 and IQ, 20.9 +/- 0.56 (34.8%). The occupations of the children's parents were civil service (43.3%), petty business (21.9%), farming (15.8%), vocational jobs (16.0%) and none (3.2%). The majority of the parents (31.8%) had secondary school education. Parents with no formal education, primary education, tertiary education and higher degrees accounted for 7.2%, 30.6%, 22.9% and 7.4%, respectively. Monthly incomes ranged between $38.5 and 230.8. Weight-for-height z-score of the children showed that 49.8% were normal, 40% mildly wasted, 9.7% moderately wasted and 0.5% severely wasted. Height-for-age z-score was 50% normal, 35.1% mildly stunted, 13.4% moderately stunted and 1.5% severely stunted. IQ scores were 5% superior 11.2% above average, 11.4% average, 8.2% below average and 64.2% intellectual deficit. The interrelationship between height-for-age, IQ and socio-demographic characteristics showed that there were insignificant differences between the age groups, gender and socio-economic status of the pupils. Conclusively, this study showed that the proportion of malnourished and intellectual deficit among the studied population were high. However, it is not clear whether

Author Details

African Journals Online (AJOL)

Self-Efficacy and Locus of Control as Predictors of Academic Procrastination Among Undergraduates in a Nigerian Abstract · Vol 16, No 1 (2013) - Articles Relative Effects of Psychological Flexibility, Parental Involvement and School Climate on Secondary School Students' School Safety in Ondo, Ondo State, Nigeria

Determinants of factors influencing technical efficiency of cocoa ...

African Journals Online (AJOL)

This study examined the factors influencing technical efficiency of cocoa production in Ondo State, Nigeria using a stochastic frontier production function. Using the random sampling technique, well-structured questionnaire were used to elicit information from 120 cocoa farmers in Ondo State, Nigeria. The mean technical ...

Nutritional knowledge, nutrients intake and nutritional status of ...

African Journals Online (AJOL)

This study aimed at assessing the anthropometry, dietary intake and micronutrient status of hypertensive patients attending specialist hospitals in Ondo State, Nigeria. A descriptive case control study was conducted among subjects attending two specialist hospitals located in Akure and Ondo towns. A total of 452 subjects ...

Serum C-reactive protein levels in pre-dialysis chronic kidney ...

African Journals Online (AJOL)

2016-03-01

Mar 1, 2016 ... 1Department of Internal Medicine, Kidney Care Centre, Ondo, Ondo State, Nigeria. ... C-reactive protein (CRP) is a marker of cardiovascular disease and predictor of mortality in CKD patients. ... Methods: This was a case-control study involving 80 consecutive CKD patients and 40 control subjects without.

Assessment Of School Library Services In Ile-Luji/Okeigbo Local ...

African Journals Online (AJOL)

The paper carried out the analysis of the library collection, staffing, building space and furniture of Ile-oluji/Okeigbo Local Government Area, Ondo State. The evaluation was based on the “Ondo State Library Board for Schools Standard”. Findings from the research showed that these school libraries were yet to achieve any ...

design of government cloud network for a developing economy

African Journals Online (AJOL)

This paper presents the design of a Government Cloud (G-Cloud) network for Ondo State Government which will provide Infrastructure as a Service (IaaS) and Software as Service (SaaS) to major government establishments and citizens within Ondo State. In designing the G-Cloud a mathematical model of cloud computing ...

Accident Prediction Models for Akure – Ondo Carriageway, Ondo ...

African Journals Online (AJOL)

FIRST LADY

significant social and economic costs (typically between 1 and 3 percent of ... recently, emphasis has shifted to the application of statistical technique in planning and ... In another study, a logistic regression approach was used to examine a ...

Module theory, extending modules and generalizations

CERN Document Server

Tercan, Adnan

2016-01-01

The main focus of this monograph is to offer a comprehensive presentation of known and new results on various generalizations of CS-modules and CS-rings. Extending (or CS) modules are generalizations of injective (and also semisimple or uniform) modules. While the theory of CS-modules is well documented in monographs and textbooks, results on generalized forms of the CS property as well as dual notions are far less present in the literature. With their work the authors provide a solid background to module theory, accessible to anyone familiar with basic abstract algebra. The focus of the book is on direct sums of CS-modules and classes of modules related to CS-modules, such as relative (injective) ejective modules, (quasi) continuous modules, and lifting modules. In particular, matrix CS-rings are studied and clear proofs of fundamental decomposition results on CS-modules over commutative domains are given, thus complementing existing monographs in this area. Open problems round out the work and establish the...

Assessing the contribution of Community-Based Natural Resources ...

African Journals Online (AJOL)

Adisa, B.O.

2013-09-20

Sep 20, 2013 ... environmental sustainability in Ondo State, Nigeria. Adisa, Banji O. ... Key words: Assessment, community-based, natural resources, socio-environmental sustainability, ... Natural resources occur within environments that are.

Irreducible Specht modules are signed Young modules

OpenAIRE

Hemmer, David J.

2005-01-01

Recently Donkin defined signed Young modules as a simultaneous generalization of Young and twisted Young modules for the symmetric group. We show that in odd characteristic, if a Specht module $S^\\lambda$ is irreducible, then $S^\\lambda$ is a signed Young module. Thus the set of irreducible Specht modules coincides with the set of irreducible signed Young modules. This provides evidence for our conjecture that the signed Young modules are precisely the class of indecomposable self-dual module...

Signed Young Modules and Simple Specht Modules

OpenAIRE

Danz, Susanne; Lim, Kay Jin

2015-01-01

By a result of Hemmer, every simple Specht module of a finite symmetric group over a field of odd characteristic is a signed Young module. While Specht modules are parametrized by partitions, indecomposable signed Young modules are parametrized by certain pairs of partitions. The main result of this article establishes the signed Young module labels of simple Specht modules. Along the way we prove a number of results concerning indecomposable signed Young modules that are of independent inter...

Antinutrient and antioxidant quality of waxed and unwaxed pawpaw ...

African Journals Online (AJOL)

STORAGESEVER

2008-08-18

Aug 18, 2008 ... Food Science and Technology Department; Rufus Giwa Polytechnic, Owo, Ondo State, ..... salivary proline - rich protein: interaction, induction and defence ... Relationship between the occurrence of chilling injury and the.

43 Ethiopian Journal of Environmental Studies & Management 7(1 ...

African Journals Online (AJOL)

Osondu

2013-10-11

. Akure, Ondo State,Nigeria ... development, poor housing quality and condition, ... In the case of the rehabilitation .... cross-junctions dotted the entire road network in this area. ... organize themselves into cooperative and thrift.

DESIGN OF IMPROVED STORMWA THE FEDERAL UNIVERSITY ...

African Journals Online (AJOL)

eobe

cape irrigation, or other human ... Figure 1: Map of Nigeria Showing Ondo State ... Figure 3: Layout of Stormwater Subcatchment Areas and the Proposed Stormwater Collection ...... [8] Falkenmark, M. Society's Interaction with the Water.

Assessment of Physicochemical Properties of some Bitumens from ...

African Journals Online (AJOL)

natural bitumen resources and potentials for sustained production of bitumen in large quantity, but basic ... Ondo State, and a manufactured type from Kaduna Refining and Petrochemical ..... Policies and Practices in Pavement Design and.

1875-IJBCS-Article-Isaac Oluwalana

African Journals Online (AJOL)

hp

Sensory and microbiological quality assessment of fried snacks produced from ripe and ... Department of Food Science and Technology, Federal University of Technology, P.M.B 704, Akure, Ondo. State .... Panelists' preference. Statistical ...

Periodic medical check-up among residents of three Nigerian South-western States

Directory of Open Access Journals (Sweden)

Saheed Opeyemi Usman

2016-09-01

Full Text Available Objectives: General medical examination is a common form of preventive medicine. Periodic medical check-up generally involves thorough history, physical examination and screening of asymptomatic persons by physicians on a regular basis as part of a routine health care process. Periodic medical check-up is considered effective in preventing illness and promoting health and reducing morbidity and mortality. This study is therefore designed to determine the knowledge, attitude and practice of periodic medical check-up among residents of Osun, Ondo and Ekiti States of Nigeria. It is also to determine the influence of educational status on its practice and compare the outcomes in the three states. Materials and Methods: The cross-sectional survey study utilizing both qualitative and quantitative method of data collection was conducted at various locations across the three states. The locations included those of public servants, private sector workers, artisans, traders, business men/women, farmers, among others. Results: 1200 consenting residents participated in the study in each of the three states. 518 (43.2% of the respondents in Ondo State are males while 682 (57.8% are females. 465 (38.8% of the respondents in Ekiti State are males while 735 (61.2% are females. 494 (41.2% of the respondents in Osun State are males while 706 (59.8% are females. The mean age in Ondo, Ekiti and Osun were 43.8 +/- 10.7 years, 44.6 +/- 11.5 years and 41.7 +/- 10.1 years respectively. 89.2%, 88.3% and 87.4% of the respondents are aware of periodic medical check-up in Ondo, Ekiti and Osun states respectively. Conclusion: There is high level of awareness of periodic medical check-up in all three states but the level of practice of routine medical check-up is low. The majority of the respondents probably don't practice it because their health insurance plan does not cover the medical check-up or due to individual/organizational financial constraints. [J Contemp Med 2016

Photovoltaic module and interlocked stack of photovoltaic modules

Science.gov (United States)

Wares, Brian S.

2014-09-02

One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame. A plurality of individual male alignment features and a plurality of individual female alignment features are included on each frame. Adjacent photovoltaic modules are interlocked by multiple individual male alignment features on a first module of the adjacent photovoltaic modules fitting into and being surrounded by corresponding individual female alignment features on a second module of the adjacent photovoltaic modules. Other embodiments, features and aspects are also disclosed.

UKPEBOR

African Journals Online (AJOL)

MICHAEL HORSFALL

Ondo State University of Science and Technology,Okitipupa ... Department of Environmental Engineering University of Port-Harcourt. E-mail: ... global warming by green house gases and its effect on cloud condensation (Levin et al., 2003).

The peritoneum at laparotomy: A survey of gynaecological practice ...

African Journals Online (AJOL)

which effectively reduces the cost of operative procedures. The long-term .... assessed in studies incorporating longer follow-up periods. Our findings were in ... Ondo and Louismed Hospital, Lagos, for sponsoring the logistics. We equally.

Aromolaran (17)

African Journals Online (AJOL)

Timade VENTURE

DRINKING WATER IN RURAL COMMUNITIES OF ONDO SOUTHWESTERN,. NIGERIA ... after which the water samples were treated with Moringa oleifera seeds for two hours. Bagbe and Uleon ..... Integrated water management st for the 21 ...

Physico-chemical studies on adulteration of honey in Nigeria.

Science.gov (United States)

Lawal, R A; Lawal, A K; Adekalu, J B

2009-08-01

The extent of adulteration of honey samples from various geographical locations in Nigeria was evaluated. In order to ascertain the quality and extent of adulteration of the honey samples, the total titrable acidity, brix content, pH, colour, viscosity, moisture content, total solids, ash content, hydroxymethyl furfural and microbiological analysis were carried out. Honey samples from Akwa-Ibom, Ondo and Ogun had a high hydroxymethyl furfural with coliforms and total bacteria counts being absent, while honey samples from Shaki, Yola and Ibadan had a low hydroxymethyl furfural and some total viable counts were present in them. These results indicate that honey samples from Akwa-Ibom, Ondo and Ogun were completely free of adulteration. However, honey samples obtained from Shaki, Yola and Ibadan were discovered to have undergone some form of adulteration.

Weyl modules, demazure modules, KR-modules, crystals, fusion products and limit constructions

OpenAIRE

Fourier, G.; Littelmann, P.

2007-01-01

We study finite dimensional representations of current algebras, loop algebras and their quantized versions. For the current algebra of a simple Lie algebra of type {\\tt ADE}, we show that Kirillov-Reshetikhin modules and Weyl modules are in fact all Demazure modules. As a consequence one obtains an elementary proof of the dimension formula for Weyl modules for the current and the loop algebra. Further, we show that the crystals of the Weyl and the Demazure module are the same up to some addi...

Superstability for Generalized Module Left Derivations and Generalized Module Derivations on a Banach Module (I

Directory of Open Access Journals (Sweden)

Rassias JM

2009-01-01

Full Text Available We discuss the superstability of generalized module left derivations and generalized module derivations on a Banach module. Let be a Banach algebra and a Banach -module, and . The mappings , and are defined and it is proved that if (resp., is dominated by then is a generalized (resp., linear module- left derivation and is a (resp., linear module- left derivation. It is also shown that if (resp., is dominated by then is a generalized (resp., linear module- derivation and is a (resp., linear module- derivation.

African Journal of Biotechnology - Vol 13, No 10 (2014)

African Journals Online (AJOL)

Linnaeus) Gaillon and S. fluitans (Borgessen) Borgesen (brown algae), found offshore in Ondo State, Nigeria · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT. OO Oyesiku, A Egunyomi ...

Organisational Climate And Teachers' Job Performance In Primary ...

African Journals Online (AJOL)

Organisational Climate And Teachers' Job Performance In Primary Schools In Ondo ... The instrument used to collect data was a questionnaire on organisational ... revealed that most of the schools run an open climate type of organisation.

Download

African Journals Online (AJOL)

USER

2015-10-16

Oct 16, 2015 ... Ethiopian Journal of Environmental Studies & Management 8(Suppl. 1): 816 ... to climate change in Ondo State, Nigeria was investigated. .... migration, farming has been left to the very old. ..... Indonesia, for Global Warming.

ejesm.v10i5.2

African Journals Online (AJOL)

USER

2017-06-05

Jun 5, 2017 ... Department of Earth Sciences, Adekunle Ajasin University, Akungba-Akoko, Ondo State. Abstract ... on the earth s surface. Shorelines are .... (red, blue and green) of each image were .... represented with different colours in.

Download this PDF file

African Journals Online (AJOL)

USER

2015-03-23

Mar 23, 2015 ... This study investigated the locational pattern and the factors among small scale industries. (SSI) in Ondo state of ... part in production and not service-based enterprises. ..... Table 9: Rotated Component Matrix. Component. 1.

RJHS 3(4b).cdr

African Journals Online (AJOL)

ABEOLUGBENGAS

2013-08-08

Aug 8, 2013 ... respondents had an accident at the workplace while 4% had injury, 60% had ... Department of Community Health, Federal Medical Centre, Owo, Ondo State, Nigeria. Res. ... fluids is a common problem among health care.

Browse Title Index

African Journals Online (AJOL)

Items 351 - 400 of 788 ... Vol 13, No 2 (2005), Influence of organisational climate and locus ... Psychoeducation On Hiv/Aids Prevention Among Young School ... ability and organizational support on work demand in Ondo State, Nigeria, Abstract.

Sustainability of Artisanal Fishers Livelihoods in the Jebba Lake ...

African Journals Online (AJOL)

User

abandonment with respect to school, hospital, road network and electricity. Socially, most .... These loans were remitted by fishers with fish caught and the bargaining power lies .... Activities of Rural Women in Ondo State Nigeria. Nigerian ...

2018-06-04T07:41:54Z https://www.ajol.info/index.php/index/oai oai ...

African Journals Online (AJOL)

... ajlex:ART The economic analysis of beef marketing in Akure, Ondo State ... of 110 respondents were randomly selected from three markets in the study area. ... and transportation cost constituted the highest share of the total marketing cost.

Profitability of Clerodendrum volubile (eweta) , a non-timber forest ...

African Journals Online (AJOL)

Timber Forest product, in Okitipupa, Ondo State Nigeria. Purposive and simple random sampling techniques were used in the selection of markets and respondents. The sample size was 60 and instrument of data collection was structured and ...

Browse Title Index

African Journals Online (AJOL)

Items 151 - 193 of 193 ... Vol 4 (2005), Promoting aquatic tourism potentials of Nigerian parks: a case ... Vol 9 (2011), Rural Poultry Production in Ondo South Senatorial District ... doses of antibiotic-enrofloxacin (10%) on induced pseudomonas ...

closed-shell variational quantum monte carlo simulation for the ...

African Journals Online (AJOL)

Vincent

1Department of Physics & Energy Studies, Achievers University, P.M.B. 1030 Owo, Ondo State, Nigeria. 2Department ..... simulation as it helps to reduce fluctuations and the cost of ... molecule from experiment is considerably low compared to.

Department of Estate Manag

African Journals Online (AJOL)

USER

2016-02-16

Feb 16, 2016 ... Ethiopian Journal of Environmental Studies & Management 8(2): 196 – 205, 2015. ... The study is aimed at investigating the effect of urban infrastructure as a tool for enhancing .... Source: Ondo State Planning Report, 2006.

Modulator-free quadrature amplitude modulation signal synthesis

Science.gov (United States)

Liu, Zhixin; Kakande, Joseph; Kelly, Brian; O'Carroll, John; Phelan, Richard; Richardson, David J.; Slavík, Radan

2014-12-01

The ability to generate high-speed on-off-keyed telecommunication signals by directly modulating a semiconductor laser’s drive current was one of the most exciting prospective applications of the nascent field of laser technology throughout the 1960s. Three decades of progress led to the commercialization of 2.5 Gbit s-1-per-channel submarine fibre optic systems that drove the growth of the internet as a global phenomenon. However, the detrimental frequency chirp associated with direct modulation forced industry to use external electro-optic modulators to deliver the next generation of on-off-keyed 10 Gbit s-1 systems and is absolutely prohibitive for today’s (>)100 Gbit s-1 coherent systems, which use complex modulation formats (for example, quadrature amplitude modulation). Here we use optical injection locking of directly modulated semiconductor lasers to generate complex modulation format signals showing distinct advantages over current and other currently researched solutions.

Physicochemical and sensory qualities of spiced soy- corn milk

African Journals Online (AJOL)

Folly

2013-04-24

Apr 24, 2013 ... search targeted at improving its acceptability should be undertaken. Omueti ... food product, bulk of raw garlic is water and lacks flavor and aroma. ... Soy-corn beverage. Cool ... market in Owo, Ondo State, Nigeria. Preparation ...

The effectiveness of Farmer Field School (FFS) training on farmers ...

African Journals Online (AJOL)

The effectiveness of Farmer Field School (FFS) training on farmers competence in Integrated Pest Management (IPM) of Cocoa in Ondo state, Nigeria. ... of years of cocoa farming (b=1.785) and participation in Farmer Field School training (b ...

Prevalence and predictors of hypoxaemia in hospitalised children at ...

African Journals Online (AJOL)

2016-08-23

Aug 23, 2016 ... providing specialized pediatric care for the communities of Osun, Ondo, and Ekiti States ... and > 30cpm in those > 5 years); noisy breathing includ- ing grunting, wheezing and ..... Intensive Care Medicine. 2011; 12: 490 – 5. 3.

Photovoltaic module and interlocked stack of photovoltaic modules

Science.gov (United States)

Wares, Brian S.

2012-09-04

One embodiment relates to an arrangement of photovoltaic modules configured for transportation. The arrangement includes a plurality of photovoltaic modules, each photovoltaic module including a frame having at least a top member and a bottom member. A plurality of alignment features are included on the top member of each frame, and a plurality of alignment features are included on the bottom member of each frame. Adjacent photovoltaic modules are interlocked by the alignment features on the top member of a lower module fitting together with the alignment features on the bottom member of an upper module. Other embodiments, features and aspects are also disclosed.

Permanent tracheostomy: Its social impacts and their management ...

African Journals Online (AJOL)

Background: Upper respiratory tract obstruction resulting from bilateral recurrent laryngeal nerve damage is commonly managed with permanent tracheostomy in our environment. Objective: To evaluate the social impacts of permanent tracheostomy and its management in Ondo State, Southwest Nigeria. Materials and ...

Organisational Commitment, Job Satisfaction and Turnover ...

African Journals Online (AJOL)

This study investigated organisational commitment, job satisfaction and turnover intentions among records management personnel in Ondo State Civil Service, Akure, Nigeria. Simple random sampling technique was used to draw 240 subjects from a population size of 275 records management personnel.

Assessing the contribution of Community-Based Natural Resources ...

African Journals Online (AJOL)

This study assessed Community-Based Natural Resources Management Programme (CBNRMP) for environmental sustainability in Ondo State, Nigeria. Data were gathered through a structured interview schedule from 120 rural dwellers participating in CBNRMP. Data collected were described with descriptive statistical ...

Laboratory evaluation of four medicinal plants as protectants against ...

African Journals Online (AJOL)

AJB SERVER

2006-11-02

Nov 2, 2006 ... percentage damage (PD) and weevil perforation index (WPI) of the weevils to the grains were .... Study of Plants used for the treatment of peptic ulcer in Ondo state and some parts of Oyo State. B.Sc Thesis. University of ...

1089-IJBCS-Article-Dr I B Oluwalana

African Journals Online (AJOL)

DR GATSING

1 The Federal University of Technology, Akure, Ondo State, Nigeria. ... This study investigated the effects of sun drying and oven drying at three different temperatures (60 0C,. 70 0C and 80 0C) on .... with water, the green leaves were drained.

AN EMPIRICAL ASSESSMENT OF THE RELATIONSHIP OF

African Journals Online (AJOL)

ETIWISTIC

2013-05-06

May 6, 2013 ... Adeyemi College of Education, Ondo bile.ruth@yahoo.com ... relationship between teachers‟ leadership roles, and students‟ attitudes ... experiences and ethical orientations towards all vibrant aspects of good life ... students‟ academic performance are expected to perform their roles ... Other methods of.

Geophysical study of saline water intrusion in Lagos municipality

African Journals Online (AJOL)

aghomotsegin

1Department of Applied Geophysics, Federal University of Technology, Akure, Ondo State, Nigeria. 2Lagos State ... E'. C. C'. N070 00'. E0020 300'. N060 15'. E0020 300'. N070 00'. E0040 30' ..... coastal aquifer, Youngkwang-gun, Korea.

Assessment of Farmers' Benefits Derived from Olam Organisation's ...

African Journals Online (AJOL)

The study assessed farmers' benefits derived from Olam organization's sustainable cocoa production extension activities in Ondo state. Structured and validated interview schedule was used to collect relevant information from thirty cocoa farmers, using multistage random sampling technique from cocoa producing towns ...

Fabiyi (19).cdr

African Journals Online (AJOL)

Timothy Ademakinwa

ecosystems and three shoreline/marine ecosystem; Mangrove, Nypa and ... the inland ecosystem in the western part of the coastal areas around Ogun, Ondo ... Keywords: Ecosystem, Agricultural Produce, Fresh Water Agriculture, Marine ... local and global environmental conditions ( Sahid ...... A National Assessment of the.

Attitude of farmers towards improved agricultural technologies in ...

African Journals Online (AJOL)

ajl yemi

2011-09-05

Sep 5, 2011 ... environmental changing situations and technologies should be cost effective and flexible for result oriented ... spectrum pesticides, which actually reduce the number of ... eventually considered fit for Ondo State for logistic reasons. This ... disagreed, for positive statements but reversed for negatively.

IFE PsychologIA - Vol 17, No 1 (2009)

African Journals Online (AJOL)

The Management Of Homosexuality Using Multimodal Therapy: A Case Study · EMAIL FULL TEXT EMAIL FULL TEXT ... Couples' Socio-Economic Characteristics; Determinants Of Children's Nutritional Status In Akure South Local Government Area Of Ondo State, Nigeria · EMAIL FULL TEXT EMAIL FULL TEXT

Fast Convolution Module (Fast Convolution Module)

National Research Council Canada - National Science Library

Bierens, L

1997-01-01

This report describes the design and realisation of a real-time range azimuth compression module, the so-called 'Fast Convolution Module', based on the fast convolution algorithm developed at TNO-FEL...

Cross-Modulation Interference with Lateralization of Mixed-Modulated Waveforms

Science.gov (United States)

Hsieh, I-Hui; Petrosyan, Agavni; Goncalves, Oscar F.; Hickok, Gregory; Saberi, Kourosh

2010-01-01

Purpose: This study investigated the ability to use spatial information in mixed-modulated (MM) sounds containing concurrent frequency-modulated (FM) and amplitude-modulated (AM) sounds by exploring patterns of interference when different modulation types originated from different loci as may occur in a multisource acoustic field. Method:…

Superstability for Generalized Module Left Derivations and Generalized Module Derivations on a Banach Module (I

Directory of Open Access Journals (Sweden)

Huai-Xin Cao

2009-01-01

Full Text Available We discuss the superstability of generalized module left derivations and generalized module derivations on a Banach module. Let 𝒜 be a Banach algebra and X a Banach 𝒜-module, f:X→X and g:𝒜→𝒜. The mappings Δf,g1, Δf,g2, Δf,g3, and Δf,g4 are defined and it is proved that if ∥Δf,g1(x,y,z,w∥ (resp., ∥Δf,g3(x,y,z,w,α,β∥ is dominated by φ(x,y,z,w, then f is a generalized (resp., linear module-𝒜 left derivation and g is a (resp., linear module-X left derivation. It is also shown that if ∥Δf,g2(x,y,z,w∥ (resp., ∥Δf,g4(x,y,z,w,α,β∥ is dominated by φ(x,y,z,w, then f is a generalized (resp., linear module-𝒜 derivation and g is a (resp., linear module-X derivation.

nigeria

African Journals Online (AJOL)

Rose

Geoelectric study of the groundwater potential of Ilara-Mokin in Ondo State Southwestern Nigeria was carried out using electrical resistivity (Vertical Electrical Sounding) method with the view to providing adequate information on the different sub-surface geoelectric layers, structural configuration of the concealed basement ...

Fishing input requirements of artisanal fishers in coastal ...

African Journals Online (AJOL)

Efforts towards increase in fish production through artisanal fishery can be achieved by making needed inputs available. Fishing requirements of artisanal fishers in coastal communities of Ondo State, Nigeria were studied. Data were obtained from two hundred and sixteen artisans using multistage random sampling ...

Komolafe et al (8)

African Journals Online (AJOL)

USER

morphometric measurements were recorded. DATA ANALYSIS. The mean abundance of each fish species collected at the landing sites of the fishermen was calculated. ..... Reservoir, Ondo State, Nigeria. Journal of. Central European Agriculture8(1):99-104. Fish Base 2000. World Wide Web electronic publication. www.

Download this PDF file

African Journals Online (AJOL)

dell

2014-04-01

Apr 1, 2014 ... 5Department of Surgery, Federal Medical Centre, Owo, Ondo State Nigeria ... Conclusion: Injuries from high velocity guns were common. Armed ... between variables using the SPSS 17.0 version. ..... been contradictory positions in definitions and management of gunshot wounds 25. .... Injury Prevention.

Modelling modulation perception : modulation low-pass filter or modulation filter bank?

NARCIS (Netherlands)

Dau, T.; Kollmeier, B.; Kohlrausch, A.G.

1995-01-01

In current models of modulation perception, the stimuli are first filtered and nonlinearly transformed (mostly half-wave rectified). In order to model the low-pass characteristic of measured modulation transfer functions, the next stage in the models is a first-order low-pass filter with a typical

deposits of ondo state, nigeria

African Journals Online (AJOL)

Pastor Adeola

The liquid limits of these clay samples range from 41% to 73%% and plastic limits range from 18% to 26% ... importance in the production of ceramics, refractories, paving bricks, paint and pharmaceutical products. .... Representative samples were made into pellets using a ..... Metal and Pet Engineers, New York: Seeley. W.

Retrospective analysis of oral and maxillofacial surgery cases in a ...

African Journals Online (AJOL)

Method: This was a retrospective study conducted at the Oral Dental Health Centre, Akure, Ondo state, Nigeria covering the period September, 2000 and April, 2004. ... Conclusion: A wide variety of cases were seen but socioeconomic, human resource and infrastructural problems limited the scope of practice. Keywords: ...

Effect of moringa oleifera seeds on bacterial quality of Drinking ...

African Journals Online (AJOL)

The physicochemical and bacteriological quality of drinking water in the rural communities of Ondo was examined and treated with the seeds of Moringa oleifera. The water samples were analyzed for some physicochemical parameters and pour plate technique was used to determine the presence of bacterial pathogens.

Author Details

African Journals Online (AJOL)

Okafor, C. Vol 7 (2008) - Articles Empowering Farmers Through Discovery Learning: A Case Study Of Farmer Field School (Ffs) Training On Cocoa Integrated Pest Management (Ipm) In Ondo State, Nigeria Abstract · Vol 16, No 2 (2008) - Articles ssessment Of The Entrepreneurial Characteristics And Intentions Among ...

Comparison of estimation methods for fitting weibull distribution to ...

African Journals Online (AJOL)

Comparison of estimation methods for fitting weibull distribution to the natural stand of Oluwa Forest Reserve, Ondo State, Nigeria. ... Journal of Research in Forestry, Wildlife and Environment ... The result revealed that maximum likelihood method was more accurate in fitting the Weibull distribution to the natural stand.

Awareness of family planning amongst antenatal patients in a ...

African Journals Online (AJOL)

Aim: This study aimed at determining the awareness about family planning amongst pregnant women presenting to the antenatal clinic of Federal Medical Centre, Owo, Ondo State, Nigeria. Methodology: The study was conducted between December, 2007 and February, 2008 at the antenatal clinic of the hospital. Ethical ...

Comparative Effects of Tri-Polar Eclectic Teaching Approach on ...

African Journals Online (AJOL)

This is an experimental study that examined the comparative effects of Tripolar Interactionist teaching strategy on the academic performance of Junior Secondary School III students of Adeyemi Demonstration secondary School Ondo in social studies. The instrument used for the study includes scheme of work, lesson notes ...

Influence of Teachers' Teaching Experience on Students' Learning ...

African Journals Online (AJOL)

This article examined teachers' teaching experience and students' learning outcomes in the secondary schools in Ondo State Nigeria. As a correlational survey, the study population comprised all the 257 secondary schools that presented students for the year 2003 senior secondary certificate (SSC) examinations in the ...

Radiological Analysis of 40 K, 226 Ra and 232 Th in Fish ...

African Journals Online (AJOL)

Radiological analysis was carried out on fish, crustacean and sediment samples collected from both fresh and marine water of river Igbokoda in the coastal area of Ondo State, Nigeria. The activity concentrations of radionuclides were determined using gamma spectrometry method. The means of the annual effective ...

Nigerian Journal of Health and Biomedical Sciences - Vol 2, No 1 ...

African Journals Online (AJOL)

Ascorbic Acid and Beta-Carotene Alleviate Oxidative Effect of London King Size® Cigarette Smoke on Tissue Lipids · EMAIL FULL TEXT EMAIL FULL TEXT ... The Awareness, Beliefs and Practices regarding Schistosomiasis among Indigenes of Ile-Oluji, Ondo State, Nigeria · EMAIL FULL TEXT EMAIL FULL TEXT

Essential oil composition and bioactivity of Thuja orientalis and ...

African Journals Online (AJOL)

The chemical composition of the essential oil extracted by hydro-distillation using Clevenger apparatus from aerial parts of Thuja orientalis and Eucalyptus camaldulensis grown in Ondo State, Nigeria was analysed by Gas Chromatography/Mass Spectrometry technique. Toxicity of the essential oils using anti-feedant and ...

Marketina erronka berriei erantzunez: balio sorkuntza

OpenAIRE

Beristain Oñederra, José Juan

2004-01-01

Artikulu honen asmoa ez da marketinaren teoriaren azterketa historikoa egitea, literaturak ondo askorik bete baitu lan hau. Honen nahia zera da: ingurunean ditugun antolakundeetan poliki-poliki sartzen ari diren marketin-ikuspegi berriei buruzko hausnarketa egitea; baita etorkizunean ikuspegi hauek indartzen lagunduko duten marketin-tresnak aztertzea ere.

Ife Journal of Science - Vol 18, No 1 (2016)

African Journals Online (AJOL)

Integrated geophysical investigation of the Igbara-Oke – Igbaraodo road pavement failure in Ondo/Ekiti state, southwestern Nigeria · EMAIL FREE FULL TEXT EMAIL FREE ... Community participation in forest management across protected areas in south eastern Nigeria · EMAIL FREE FULL TEXT EMAIL FREE FULL TEXT

Browse Title Index

African Journals Online (AJOL)

Items 51 - 100 of 198 ... Vol 15, No 4 (2015), Dental Emergencies: Knowledge, Practices and Perception of Proficiency among General Medical Practitioners in Ondo State, South Western Nigeria, Abstract ... Vol 11, No 4 (2013), Hepatitis B Virus Vaccination Status of Laboratory Workers in Nigerian Hospitals, Abstract.

Mutually-modulated cross-gain modulation and slow light

International Nuclear Information System (INIS)

Sternklar, Shmuel; Sarid, Eyal; Wart, Maxim; Granot, Er'el

2010-01-01

The interaction of pump and Stokes light in a Brillouin medium, where both beams are modulated, can be utilized for controlling the group velocity of the amplified Stokes (or depleted pump). The dependence of the group velocity for this mutually-modulated cross-gain modulation (MMXGM) technique on the Brillouin gain parameter is studied. A sharp transition to slow light occurs in the G 1 α/β≈1 regime, where G 1 is the Brillouin gain parameter, and α and β are the pump and Stokes modulation indices, respectively. A comparison of MMXGM slow light to the Brillouin dispersion-based slow-light technique reveals the fundamental differences between them. The formation of higher harmonics of the modulation frequency is also discussed. The theoretical predictions are experimentally corroborated and potential applications in fiber-based sensing and interferometry are discussed

Electroabsorption optical modulator

Energy Technology Data Exchange (ETDEWEB)

Skogen, Erik J.

2017-11-21

An electroabsorption modulator incorporates waveguiding regions along the length of the modulator that include quantum wells where at least two of the regions have quantum wells with different bandgaps. In one embodiment of the invention, the regions are arranged such that the quantum wells have bandgaps with decreasing bandgap energy along the length of the modulator from the modulator's input to its output. The bandgap energy of the quantum wells may be decreased in discrete steps or continuously. Advantageously, such an arrangement better distributes the optical absorption as well as the carrier density along the length of the modulator. Further advantageously, the modulator may handle increased optical power as compared with prior art modulators of similar dimensions, which allows for improved link gain when the optical modulator is used in an analog optical communication link.

Processing module operating methods, processing modules, and communications systems

Science.gov (United States)

McCown, Steven Harvey; Derr, Kurt W.; Moore, Troy

2014-09-09

A processing module operating method includes using a processing module physically connected to a wireless communications device, requesting that the wireless communications device retrieve encrypted code from a web site and receiving the encrypted code from the wireless communications device. The wireless communications device is unable to decrypt the encrypted code. The method further includes using the processing module, decrypting the encrypted code, executing the decrypted code, and preventing the wireless communications device from accessing the decrypted code. Another processing module operating method includes using a processing module physically connected to a host device, executing an application within the processing module, allowing the application to exchange user interaction data communicated using a user interface of the host device with the host device, and allowing the application to use the host device as a communications device for exchanging information with a remote device distinct from the host device.

Author Details

African Journals Online (AJOL)

Abstract · Vol 3, No 1 (1996) - Articles Widow-inheritors' perception of widowhood problems in Ondo and Ekiti State of South Western Nigeria: Findings from a qualitative study. Abstract · Vol 14, No 2 (2011) - Articles Socio-Demographic Predictors of Domestic Outsourcing among Working Women in Ibadan, Nigeria Abstract.

Assessment of Physicochemical Properties of some Bitumens from ...

African Journals Online (AJOL)

Assessment of the results vis-a-vis available information on bitumens elsewhere indicate that any clear surface or underground natural bitumen obtainable in the region of Agbabu village in Ondo State, and a manufactured type from Kaduna Refining and Petrochemical Company (KRPC) in the country are comparable with ...

Author Details

African Journals Online (AJOL)

Faleyimu, OI. Vol 10, No 1 (2012) - Articles Institutional Arrangement to Forestry Development in the South-Western Nigeria Abstract · Vol 12, No 2 (2014) - Articles Profitability of Clerodendrum volubile (eweta) , a non-timber forest product, in Okitipupa, Ondo State, Nigeria Abstract. ISSN: 1597-0906. AJOL African Journals ...

Parenting styles, gender, religiosity and examination malpractices ...

African Journals Online (AJOL)

This study examined the influence of parenting styles, gender and religiousity on the attitude of students towards examination malpractices. One hundred and ninety –eight participants were used which comprises of 100 males and 98 females of Adekunle Ajasin University, Akungba- Akoko in Ondo state. Parental care scale ...

Research Article

African Journals Online (AJOL)

2018-05-01

May 1, 2018 ... distributed to the staff of NNPC/PPMC depots in Ondo, Ogun and Oyo states. Simple ... severity were done using reliability important indices. The risks from ..... The distribution system of petroleum products in the Southwest part of Nigeria through ... International Association for Energy Economics, pp. 13-15.

Effect of Storage Method on Nutrients Composition, Antioxidant ...

African Journals Online (AJOL)

Corchorus olitorious is a vegetable that is popularly consumed in West Africa. It is also known to be rich in nutrients. The effects of market storage methods of vegetables on nutrient composition, antioxidant contents and consumer acceptability of Corchorus olitorious were assessed at Owo, Ondo state, Southwest Nigeria.

Socio-Economic Factors Influencing Entrepreneurship Among ...

African Journals Online (AJOL)

Socio-Economic Factors Influencing Entrepreneurship Among Women In Fishing Communities In Ondo State, Nigeria. ... The study found that overall entrepreneurial rating of the study group is low, essential input can not be easily gotten in the area, the respondents has large household size thereby had a large dependents ...

Prevalence of diabetes mellitus and the associated behavioral risks ...

African Journals Online (AJOL)

Objective: The prevalence of type 2 Diabetes is associated with significant morbidity and mortality, hence the need for early identification of risk factors. This study, therefore, aimed to determine the prevalence of diabetes mellitus and the associated behavioral risks among secondary school staff in Owo, Ondo State, Nigeria.

Breastfeeding and emotions of infants of working mothers in ...

African Journals Online (AJOL)

The study examined breast feeding and emotions of infants of working mothers in Adekunle Ajasin University Akungba Akoko in Ondo State. A total number of 150 mothers randomly selected from different unit of the University were used as research subjects. The subjects were exposed to Maternal Employment ...

Evaluation of Demographic Variables and Socio-economic Status ...

African Journals Online (AJOL)

This study evaluated the demographic variables and socio-economic status on the prevalence of health hazards amongst residents of Akure North Local Government, Ondo State, Nigeria. The study was a descriptive research design of the survey type. The population for this study was estimated to be 131,587 residents.

Surveys of virus diseases on pepper ( Capsicum spp.) in South-west ...

African Journals Online (AJOL)

Surveys to determine the incidence, diversity and distribution of viruses infecting pepper (Capsicum spp.) were conducted in six states (Oyo, Ondo, Osun, Ogun, Ekiti and Lagos) of South-west Nigeria in 2010 and 2011. Leaf samples from symptomatic and asymptomatic plants were collected at random from farmers' fields ...

Auditory sensitivity to spectral modulation phase reversal as a function of modulation depth.

Science.gov (United States)

Buss, Emily; Grose, John

2018-01-01

The present study evaluated auditory sensitivity to spectral modulation by determining the modulation depth required to detect modulation phase reversal. This approach may be preferable to spectral modulation detection with a spectrally flat standard, since listeners appear unable to perform the task based on the detection of temporal modulation. While phase reversal thresholds are often evaluated by holding modulation depth constant and adjusting modulation rate, holding rate constant and adjusting modulation depth supports rate-specific assessment of modulation processing. Stimuli were pink noise samples, filtered into seven octave-wide bands (0.125-8 kHz) and spectrally modulated in dB. Experiment 1 measured performance as a function of modulation depth to determine appropriate units for adaptive threshold estimation. Experiment 2 compared thresholds in dB for modulation detection with a flat standard and modulation phase reversal; results supported the idea that temporal cues were available at high rates for the former but not the latter. Experiment 3 evaluated spectral modulation phase reversal thresholds for modulation that was restricted to either one or two neighboring bands. Flanking bands of unmodulated noise had a larger detrimental effect on one-band than two-band targets. Thresholds for high-rate modulation improved with increasing carrier frequency up to 2 kHz, whereas low-rate modulation appeared more consistent across frequency, particularly in the two-band condition. Experiment 4 measured spectral weights for spectral modulation phase reversal detection and found higher weights for bands in the spectral center of the stimulus than for the lowest (0.125 kHz) or highest (8 kHz) band. Experiment 5 compared performance for highly practiced and relatively naïve listeners, and found weak evidence of a larger practice effect at high than low spectral modulation rates. These results provide preliminary data for a task that may provide a better estimate of

Development of the module inspection system for new standardized radiation monitoring modules

International Nuclear Information System (INIS)

Furukawa, Masami; Shimizu, Kazuaki; Hiruta, Toshihito; Mizugaki, Toshio; Ohi, Yoshihiro; Chida, Tooru.

1994-10-01

This report mentions about the module inspection system which does the maintenance check of the monitoring modules adapted the new monitoring standard, as well as the result of the verification of the modules. The module inspection system is the automatic measurement system with the computer. The system can perform the functional and the characteristic examination of the monitoring modules, the calibration with radiation source and inspection report. In the verification of the monitoring module, three major items were tested, the adaptability for the new monitoring standard, the module functions and each characteristics. All items met the new monitoring standard. (author)

Reduced multiplication modules

Indian Academy of Sciences (India)

if M is a von Neumann regular module (VNM); i.e., every principal submodule of M is a summand submodule. Also if M is an injective R-module, then M is a VNM. Keywords. Multiplication module; reduced module; minimal prime submodule;. Zariski topology; extremally disconnected. 1. Introduction. In this paper all rings are ...

Divisible ℤ-modules

Directory of Open Access Journals (Sweden)

Futa Yuichi

2016-03-01

Full Text Available In this article, we formalize the definition of divisible ℤ-module and its properties in the Mizar system [3]. We formally prove that any non-trivial divisible ℤ-modules are not finitely-generated.We introduce a divisible ℤ-module, equivalent to a vector space of a torsion-free ℤ-module with a coefficient ring ℚ. ℤ-modules are important for lattice problems, LLL (Lenstra, Lenstra and Lovász base reduction algorithm [15], cryptographic systems with lattices [16] and coding theory [8].

Amplitude modulation detection with concurrent frequency modulation.

Science.gov (United States)

Nagaraj, Naveen K

2016-09-01

Human speech consists of concomitant temporal modulations in amplitude and frequency that are crucial for speech perception. In this study, amplitude modulation (AM) detection thresholds were measured for 550 and 5000 Hz carriers with and without concurrent frequency modulation (FM), at AM rates crucial for speech perception. Results indicate that adding 40 Hz FM interferes with AM detection, more so for 5000 Hz carrier and for frequency deviations exceeding the critical bandwidth of the carrier frequency. These findings suggest that future cochlear implant processors, encoding speech fine-structures may consider limiting the FM to narrow bandwidth and to low frequencies.

Whole Module Offgas Test Report: Space-Xl Dragon Module

Science.gov (United States)

James, John T.

2012-01-01

On September 26 and September 28,2012 a chemist from the JSC Toxicology Group acquired samples of air in 500 m1 evacuated canisters from the sealed Space-Xl Dragon Module. One sample was also acquired from Space-X Facility near the module at the start of the test. Samples of the module air were taken in triplicate once the module had been sealed, and then taken again in triplicate 1.98 days later. Ofthe triplicate samples, the first served as a line purge, and the last two were analyzed. The results of 5 samples are reported.

Author Details

African Journals Online (AJOL)

Faleyimu, OI. Vol 18, No 3 (2014) - Articles Public perceptions of Urban Forests in Okitipupa Nigeria: Implication for Environmental Conservation Abstract PDF · Vol 18, No 4 (2014) - Articles Socio Economic Assessment of Urban Forestry Respondents' income in Okiti Pupa, Ondo State, Nigeria Abstract PDF · Vol 21, No 6 ...

Critical Period for Weed Removal in Garden Egg (Solanum Incanum ...

African Journals Online (AJOL)

Field experiments were conducted at the Teaching and Research Farm, Adeyemi College of Education, Ondo during the 2004 and 2005 cropping seasons to determine the extent of yield loss due to weed infestation and the critical time for weed removal in garden egg (Solanum incanum). The experiment which was ...

Ethnobotanical studies of west african okra [ Abelmoschus caillei (a ...

African Journals Online (AJOL)

It is produced in traditional agriculture especially when other vegetables are not in season and an important cash crop in the local economy. This study is aimed at generating information and documenting the ethnobotany of A. caillei via the indigenous knowledge among tribes of Delta, Edo and Ondo States of Nigeria).

Geophysical mapping of the occurrence of shallow oil sands in ...

African Journals Online (AJOL)

Oil sands are known to be an alternate source of energy and of great economic value. To map the occurrence of shallow oil sand deposits in Idiopopo, Okitipupa area in Ondo state southwestern Nigeria, vertical electric sounding (VES) in 11 stations along 3 profiles were carried out using the Schlumberger configuration.

Pattern of Family Planning Methods used by Antenatal Patients in ...

African Journals Online (AJOL)

This study aimed at assessing the pattern of family planning methods used by antenatal patients at Federal Medical Centre, Owo, Ondo State, Nigeria. The study was conducted between December,2007 and February,2008 at the antenatal clinic of the hospital. Ethical clearance was obtained from the Ethical committee of ...

Prevalence of Ascariasis among the Students of Jooro Grammar ...

African Journals Online (AJOL)

Study to know the prevalence of ascariasis among the students and teachers of Jooro Grammar School, Ibule-Soro, Ondo State, was undertaken. A total of 243 subjects examined. Stool sample was collected from each subject and examined for the presence of the parasite, using wet preparation and concentration methods ...

Download this PDF file

African Journals Online (AJOL)

big timmy

column and preparative thin layer chromatography for isolation and purification of the compounds. ... medicinal properties in the indigenous system of ... the plant. MATERIALS AND METHODS. Plant Material. The latex of Euphorbia drupifera, 250 ml, was obtained from a standing plant in Ipe/Oka akoko area of Ondo State in ...

Awareness and effects of climate change on cocoa production in ...

African Journals Online (AJOL)

This, according to reports, resulted from climate failure, among other factors. In the light of this, this study examined awareness and effects of climate change on cocoa production in Ondo State, the Nigeria's leading cocoa producing state. Specifically, the study decribed socio-‐economic characteristics of cocoa farmers in ...

Author Details

African Journals Online (AJOL)

Fatusin, AF. Vol 8, No 3 (2015) - Articles Spatial Characteristics: A Planners View of Locational Pattern and Underlying Factors among Small Scale Industries in Ondo State of Nigeria Abstract PDF · Vol 8 (2015): Supplement 1 - Articles The place of firms investment in agglomeration economies amongst insutries in the ...

The Problems in the teaching and learning of Accounting as a ...

African Journals Online (AJOL)

This study is designed to identify the problems facing the teaching and learning of Accounting as a vocational subject in secondary schools in Ondo State and to proffer solution. The study population was about 150 senior accounting teachers in those schools that registered students for accounting at the SSC Examination ...

Model Development of Degradation of PV Modules Backsheet with Locating Place of Module

Energy Technology Data Exchange (ETDEWEB)

Kempe, Michael D [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wang, Yu [Case Western Reserve University; Fairbrother, Andrew [National Institute of Standards and Technology (NIST); Merzlic, Sebastien [Arkema; Julien, Scott [Northeastern University; Fridman, Lucas S. [Case Western Reserve University; Loyer, Camille [Arkema; Lefebvre, Amy L. [Arkema; O' Brien, Gregory [Arkema; Gu, Xiaohong [National Institute of Standards and Technology (NIST); Ji, Liang [Underwriters Laboratories; Boyce, Kenneth P. [Underwriters Laboratories; Wan, Kai-tak [Northeastern University; French, Roger H. [Case Western Reserve University; Bruckman, Laura S. [Case Western Reserve University

2017-08-23

Performance of a photovoltaic (PV) module is related to the micro-environment around the module. The position of photovoltaic modules in an array row have a large effect on the yellowing and gloss of PV module backsheet exposed in Dfa climatic zone (Gaithersburg, MD) with a polyethylene naphthalate (PEN) outer layer. Stress/Response models of yellowing and gloss-losing as function of location parameters of module, including the shed, row, measurement position in a same module and the distance of module location to the row center, are under development. The module installation height had the greatest influence on degradation of PEN PV backsheet in the Dfa climatic zone. The module backsheets at the end of an array have higher degradation rate (edge effect). The edge effect decreases with increasing of module installation heights.

Modulation masking produced by second-order modulators

DEFF Research Database (Denmark)

Füllgrabe, Christian; Moore, Brian C.J.; Demany, Laurent

2005-01-01

Recent studies suggest that an auditory nonlinearity converts second-order sinusoidal amplitude modulation (SAM) (i.e., modulation of SAM depth) into a first-order SAM component, which contributes to the perception of second-order SAM. However, conversion may also occur in other ways such as coch...

Young module multiplicities and classifying the indecomposable Young permutation modules

OpenAIRE

Gill, Christopher C.

2012-01-01

We study the multiplicities of Young modules as direct summands of permutation modules on cosets of Young subgroups. Such multiplicities have become known as the p-Kostka numbers. We classify the indecomposable Young permutation modules, and, applying the Brauer construction for p-permutation modules, we give some new reductions for p-Kostka numbers. In particular we prove that p-Kostka numbers are preserved under multiplying partitions by p, and strengthen a known reduction given by Henke, c...

Electro-optic modulator with ultra-low residual amplitude modulation for frequency modulation and laser stabilization.

Science.gov (United States)

Tai, Zhaoyang; Yan, Lulu; Zhang, Yanyan; Zhang, Xiaofei; Guo, Wenge; Zhang, Shougang; Jiang, Haifeng

2016-12-01

The reduction of the residual amplitude modulation (RAM) induced by electro-optic modulation is essential for many applications of frequency modulation spectroscopy requiring a lower system noise floor. Here, we demonstrate a simple passive approach employing an electro-optic modulator (EOM) cut at Brewster's angle. The proposed EOM exhibits a RAM of a few parts per million, which is comparable with that achieved by a common EOM under critical active temperature and bias voltage controls. The frequency instability of a 10 cm cavity-stabilized laser induced by the RAM effect of the proposed EOM is below 3×10-17 for integration times from 1 to 1000 s, and below 4×10-16 for comprehensive noise contributions for integration times from 1 to 100 s.

Significantly High Modulation Efficiency of Compact Graphene Modulator Based on Silicon Waveguide.

Science.gov (United States)

Shu, Haowen; Su, Zhaotang; Huang, Le; Wu, Zhennan; Wang, Xingjun; Zhang, Zhiyong; Zhou, Zhiping

2018-01-17

We theoretically and experimentally demonstrate a significantly large modulation efficiency of a compact graphene modulator based on a silicon waveguide using the electro refractive effect of graphene. The modulation modes of electro-absorption and electro-refractive can be switched with different applied voltages. A high extinction ratio of 25 dB is achieved in the electro-absorption modulation mode with a driving voltage range of 0 V to 1 V. For electro-refractive modulation, the driving voltage ranges from 1 V to 3 V with a 185-pm spectrum shift. The modulation efficiency of 1.29 V · mm with a 40-μm interaction length is two orders of magnitude higher than that of the first reported graphene phase modulator. The realisation of phase and intensity modulation with graphene based on a silicon waveguide heralds its potential application in optical communication and optical interconnection systems.

Diseases of poultry in Akure, Nigeria: a ten year analysis of clinical ...

African Journals Online (AJOL)

An analysis of poultry diseases diagnosed at the avian clinic of Veterinary Hospital of the Ministry of Agriculture and Natural Resources, Akure, Ondo-State, was carried out using data from 22,927 cases reported at the clinic over a period of ten years. The commonest diseases reported were Newcastle, 9.8%, chronic ...

Compositional and industrial assessment of Isua-Akoko, Akure ...

African Journals Online (AJOL)

The physical and chemical properties of clay deposits around Isua-Akoko, Akure, Lafe and Ayadi in Ondo State southwestern Nigeria have been examined. The results have shown that Isua-Akoko, Akure and Lafe Clays are plastic fire clays while Ayadi clay is kaolinite. Grain size analysis reveals that Isua Akoko Clay ...

In vitro investigation on antifungal activity of some plant extracts ...

African Journals Online (AJOL)

Prof. Ogunji

In vitro investigation on antifungal activity of some plant extracts against Pyricularia oryzae. Olufolaji, D. B.1, Adeosun, B.O.1 and Onasanya, R. O.2. 1. Department of Crop, Soil and Pest Management, The Federal University of Technology, PMB 704. Akure, Ondo state, Nigeria. 2. Department of Agriculture, Federal College ...

Browse Title Index

African Journals Online (AJOL)

Items 1 - 50 of 56 ... Vol 8 (2010), Cocoa Farmers' Perception of the Effect of World Trade Organization's Standards on Production in Ondo State, Nigeria, Abstract. O.I Oladele. Vol 5 (2006) ... Vol 7 (2008), Consumer Preferences for Rice Quality Characteristics in Accra and the Effects of these Preferences on Price, Abstract.

RJHS 5(3)

African Journals Online (AJOL)

USER

factors among the staff of three secondary schools in Owo, Ondo State,. Nigeria. 1,2. 3 ... Correlation (r=0.347) exist between Waist/Hip ratio and .... teachers and other staff working in the schools. ... categorized to have had excessive alcohol intake. ... cigarettes every day or some days in the last 30 ..... Metabolic Syndrome.

A Study of Hospital Waste Generation and Management Practice in ...

African Journals Online (AJOL)

This study was carried out in Akure, the capital of Ondo State, Nigeria to assess the current practice of hospital wastes management, the magnitude and variety of wastes and the awareness of the stakeholders on the implications of their activities. The composition of wastes found in the 20 healthcare facilities visited ...

Effects of different traditional cooking methods on nutrients and ...

African Journals Online (AJOL)

The objective of this research was to determine the effect of cooking using two different methods of preparing okra soup in Ondo state on nutrient, mineral content including zinc bioavailability of okra, Abelmoschus esculentus. The okra fruits were grated and divided into four lots; two lots were cooked with other ingredients of ...

Ethno veterinary practices of small ruminant livestock farmers in ...

African Journals Online (AJOL)

Data were collected from a total of 400 ruminant livestock farmers selected from Oyo, Ogun, Lagos, Ondo and Edo States of Nigeria using Multi-stage sampling technique. The data collected include the specific attributes of small ruminant livestock farmers in the area, ethno-veterinary practices of farmers in the treatment of ...

Browse Title Index

African Journals Online (AJOL)

Items 251 - 300 of 309 ... Vol 17, No 1 (2010), The Effects of Benomyl and Glyphosate Treated Plant Litter on Nitrogen Mineralization in Mollisols, Abstract PDF. AA Afrifa, M Wood, ... Vol 19, No 1 (2011), The Food Habits of Ctenopoma pethereci, Gunther (Pisces: Anabantidae) in River Oluwa, Ondo State, Nigeria, Abstract PDF.

Weakly Coretractable Modules

Science.gov (United States)

Hadi, Inaam M. A.; Al-aeashi, Shukur N.

2018-05-01

If R is a ring with identity and M is a unitary right R-module. Here we introduce the class of weakly coretractable module. Some basic properties are investigated and some relationships between these modules and other related one are introduced.

Surface flaw detection by means of infrared radiometer. Part 3. ; Detection limit influenced by an environment temperature. Sekigai hoshakei ni yoru hyomen kekkan no kenshutsu. 3. ; Shuhen ondo ni yoru kenshutsu genkai no eikyo

Energy Technology Data Exchange (ETDEWEB)

Okamoto, U; Kaminaga, F [Ibaraki University, Ibaraki (Japan). Faculty of Engineering; Ishii, T [Ibaraki University, Ibaraki (Japan); Eto, M; Ooka, N; Kanaya, K; Eto, Y [Japan Atomic Energy Research Institute, Ibaraki (Japan); Kurokawa, T [Nippon Denki Sanei Ltd. Co., Tokyo (Japan)

1990-12-20

Measuring a radiation energy distribution around surface flaw by means of a infrared rediometer can detect fine flaw on the surface. The characteristics were examined using a light quantum type radiation thermometer consisted of Hg-Cd-Te as a sensor. A surrounding wall consisted of a black body wall was installed between the sensor and test piece, and by thus maintaining the surrounding wall temperature constant, reflection energy from the test piece surface was maintained constant for stabilized measurement. The measurement values are the sum of energies from emission and reflection, or the so-called radiosity values. To avoid effects from the reflection to reduce variance in the emissivity, it is necessary to keep the surrounding wall temperatures lower by more than 20 {degree}C than the test piece radiation temperatures. Emissivity can be calculated from the rediositivity (sum of the radiation and the reflection), the surrounding wall temperatures, and the test piece radiation temperatures. If the surface is rough, variance in the measurements increases. The larger the difference in the test piece and surrounding wall temperatures, the thermo image of the defects on the test piece surface becomes more distinctive, thus the detection limit can be enhanced. 7 refs., 13 figs.

Directed network modules

International Nuclear Information System (INIS)

Palla, Gergely; Farkas, Illes J; Pollner, Peter; Derenyi, Imre; Vicsek, Tamas

2007-01-01

A search technique locating network modules, i.e. internally densely connected groups of nodes in directed networks is introduced by extending the clique percolation method originally proposed for undirected networks. After giving a suitable definition for directed modules we investigate their percolation transition in the Erdos-Renyi graph both analytically and numerically. We also analyse four real-world directed networks, including Google's own web-pages, an email network, a word association graph and the transcriptional regulatory network of the yeast Saccharomyces cerevisiae. The obtained directed modules are validated by additional information available for the nodes. We find that directed modules of real-world graphs inherently overlap and the investigated networks can be classified into two major groups in terms of the overlaps between the modules. Accordingly, in the word-association network and Google's web-pages, overlaps are likely to contain in-hubs, whereas the modules in the email and transcriptional regulatory network tend to overlap via out-hubs

Decoupled Modulation Control

Energy Technology Data Exchange (ETDEWEB)

Wang, Shaobu; Huang, Renke; Huang, Zhenyu; Diao, Ruisheng

2016-06-03

The objective of this research work is to develop decoupled modulation control methods for damping inter-area oscillations with low frequencies, so the damping control can be more effective and easier to design with less interference among different oscillation modes in the power system. A signal-decoupling algorithm was developed that can enable separation of multiple oscillation frequency contents and extraction of a “pure” oscillation frequency mode that are fed into Power System Stabilizers (PSSs) as the modulation input signals. As a result, instead of introducing interferences between different oscillation modes from the traditional approaches, the output of the new PSS modulation control signal mainly affects only one oscillation mode of interest. The new decoupled modulation damping control algorithm has been successfully developed and tested on the standard IEEE 4-machine 2-area test system and a minniWECC system. The results are compared against traditional modulation controls, which demonstrates the validity and effectiveness of the newly-developed decoupled modulation damping control algorithm.

Classes of modules

CERN Document Server

Dauns, John

2006-01-01

Because traditional ring theory places restrictive hypotheses on all submodules of a module, its results apply only to small classes of already well understood examples. Often, modules with infinite Goldie dimension have finite-type dimension, making them amenable to use with type dimension, but not Goldie dimension. By working with natural classes and type submodules (TS), Classes of Modules develops the foundations and tools for the next generation of ring and module theory. It shows how to achieve positive results by placing restrictive hypotheses on a small subset of the complement submodules, Furthermore, it explains the existence of various direct sum decompositions merely as special cases of type direct sum decompositions. Carefully developing the foundations of the subject, the authors begin by providing background on the terminology and introducing the different module classes. The modules classes consist of torsion, torsion-free, s[M], natural, and prenatural. They expand the discussion by exploring...

Climate change induced occupational stress and reported morbidity among cocoa farmers in South-Western Nigeria

Directory of Open Access Journals (Sweden)

Abayomi Samuel Oyekale

2015-05-01

Full Text Available Introduction and objective. Climate change is one of the major development hurdles in many developing countries. The health outcome of farm households are related to climate change, which is related to several external and internal health-related issues, such as management of occupational stressors. This study seeks, inter alia, to determine the climate related occupational stress and factors influencing reported sick times among cocoa farmers. Material and Method. Data were collected from selected cocoa farmers in South-Western Nigeria. Descriptive statistics and Negative Binomial regression were used for data analyses. Results. The results showed that cocoa farmers were ageing, and that the majority had cultivating cocoa for most of their years of farming. Cocoa was the primary crop for the majority of the farmers, while 92.00% of the farmers in Osun state owned the cultivated cocoa farms. The forms of reported climate change induced occupational stresses were increase in pest infestation (74.5% in Ekiti state, difficulties in weed control (82.1% in Ekiti state, missing regular times scheduled for spraying cocoa pods (45.7% in Ondo state, inability to spray cocoa effectively (58.5% in Ondo state, and reduction in cocoa yield (71.7% in Ekiti state. The Negative Binomial regression results showed that the age of farmers (0.0103, their education (-0.0226, years of cocoa farming (-0.0112, malaria infection (0.4901, missed spraying (0.5061, re-spraying of cocoa (0.2630, reduction in cocoa yield (0.20154, contact with extension (0.2411 and residence in Ondo state (-0.2311 were statistically significant (p<0.05. Conclusion. Climate change influences the farm operations of cocoa farmers with resultant occupational stresses. Efforts to assist cocoa farmers should include, among others, provision of weather forecasts and some form of insurance.

Prognostic factors affecting outcome of intrauterine insemination ...

African Journals Online (AJOL)

for a rational use of the procedure so that couples do not waste time and money on ineffective therapy if it is not indicated. Objective: ... of intrauterine insemination procedures at a fertility center in Ondo, ... significant reduction in the side effects associated with the .... HMG alone or in combination with other drugs for ovarian.

Download this PDF file

African Journals Online (AJOL)

for slope stability analysis as it relates to future mining operations on the tar sand deposit of Southwestern. Nigeria, using Loda village, Ondo. Stăte, Southwestern Nigeria, as a case study. The crucial engineering problem of slope instability or stability has been simulated to determine the bench face angle that would be safe.

Cocoa Farmers' Perception of the Effect of World Trade ...

African Journals Online (AJOL)

The study examined the perception of cocoa farmers of the effect of the standards of the World Trade Organisation on cocoa production in Ondo State, Nigeria. Simple random sampling technique was used to select farmers in the area covered by the project and primary data were collected through the use of a structured ...

evaluation of job performance of village extension agents in lagos

African Journals Online (AJOL)

AFINNI IMAM

economy by employing more than 6 million fisher folks in Nigeria (Fish for All Summit, 2005) in ... thereby leading to a cycle of low production, low income, and poverty and being food in- ... characteristic grouped into classes. .... in the high sea; but the Ilaje women who are immigrant fishing families from Ondo State where.

Digital front-end module (DFEM) series; Digital front end module (DFEM) series

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

The digital front-end module (DFEM) is a module in which the processes ranging from the reception of digitally modulated radiofrequencies to the output of digital IF (Intermediate Frequency) signals or data streams are integrated. Beginning with a module for the MCNS (Multimedia Cable Network System) cable modem which was the first module in this business field approved by the Cable Labs, U.S., Toshiba has developed a series of DFEMs for various digital media for satellites, ground waves, and CATV (Cable Television) systems. The series is characterized by (1) the serialization of DFEMs compatible with various digital modulation techniques such as 8 PSK (Phase Shift Keying), OFDM (Orthogonal Frequency Division Multiplexing), and 256 QAM (Quadrature Amplitude Modulation), (2) easy connection with digital circuits thanks to the high shielding effect, and (3) the achievement of smaller size, higher performance, and lower power consumption. (translated by NEDO)

Surface modification of ceramics. Ceramics no hyomen kaishitsu

Energy Technology Data Exchange (ETDEWEB)

Hioki, T. (Toyota Central Research and Development Labs., Inc., Nagoya (Japan))

1993-07-05

Surface modification of ceramics and some study results using in implantation in surface modification are introduced. The mechanical properties (strength, fracture toughness, flaw resistance) of ceramics was improved and crack was repaired using surface modification by ion implantation. It is predicted that friction and wear properties are considerably affected because the hardness of ceramics is changed by ion implantation. Cementing and metalization are effective as methods for interface modification and the improvement of the adhesion power of the interface between metal and ceramic is their example. It was revealed that the improvement of mechanical properties of ceramics was achieved if appropriate surface modification was carried out. The market of ceramics mechanical parts is still small, therefore, the present situation is that the field of activities for surface modification of ceramics is also narrow. However, it is thought that in future, ceramics use may be promoted surely in the field like medicine and mechatronics. 8 refs., 4 figs.

Quantitative evaluation of pregnant women delivery status’ records in Akure, Nigeria

Directory of Open Access Journals (Sweden)

Adebowale O. Adejumo

2018-02-01

Full Text Available In this data article, monthly records (datasets of total delivery, normal delivery, delivery through Caesarean section and number of still births from pregnant women in Akure, the capital city of Ondo state Nigeria, for a period of ten years, between January 2007 and December 2016 were considered. Correlational and time series analyses were conducted on the monthly records of total delivery, normal delivery (delivery through woman virginal, delivery through Caesarean section, and number of still births, in order to observe the patterns each of these indicators follows and to recommend appropriate model for forecasting their future values. The data were obtained in raw form from State Specialist Hospital (SSH, Akure, Ondo state, Nigeria. A clear description and variation in each of these indicators (total delivery, normal delivery, caesarean section, and still births were considered separately using descriptive statistics and box plots. Different models were also proposed for each of these indicators using time series models. Keywords: ARIMA, Caesarean section, Normal delivery, Data, Still birth, Time series, Akure

Relative injectivity and CS-modules

Directory of Open Access Journals (Sweden)

Mahmoud Ahmed Kamal

1994-01-01

Full Text Available In this paper we show that a direct decomposition of modules M⊕N, with N homologically independent to the injective hull of M, is a CS-module if and only if N is injective relative to M and both of M and N are CS-modules. As an application, we prove that a direct sum of a non-singular semisimple module and a quasi-continuous module with zero socle is quasi-continuous. This result is known for quasi-injective modules. But when we confine ourselves to CS-modules we need no conditions on their socles. Then we investigate direct sums of CS-modules which are pairwise relatively inective. We show that every finite direct sum of such modules is a CS-module. This result is known for quasi-continuous modules. For the case of infinite direct sums, one has to add an extra condition. Finally, we briefly discuss modules in which every two direct summands are relatively inective.

Receiver bandwidth effects on complex modulation and detection using directly modulated lasers.

Science.gov (United States)

Yuan, Feng; Che, Di; Shieh, William

2016-05-01

Directly modulated lasers (DMLs) have long been employed for short- and medium-reach optical communications due to their low cost. Recently, a new modulation scheme called complex modulated DMLs has been demonstrated showing a significant optical signal to noise ratio sensitivity enhancement compared with the traditional intensity-only detection scheme. However, chirp-induced optical spectrum broadening is inevitable in complex modulated systems, which may imply a need for high-bandwidth receivers. In this Letter, we study the impact of receiver bandwidth effects on the performance of complex modulation and coherent detection systems based on DMLs. We experimentally demonstrate that such systems exhibit a reasonable tolerance for the reduced receiver bandwidth. For 10 Gbaud 4-level pulse amplitude modulation signals, the required electrical bandwidth is as low as 8.5 and 7.5 GHz for 7% and 20% forward error correction, respectively. Therefore, it is feasible to realize DML-based complex modulated systems using cost-effective receivers with narrow bandwidth.

Bent Electro-Absorption Modulator

DEFF Research Database (Denmark)

2002-01-01

by applying a variable electric or electronmagnetic field. The modulation of the complex refractive index results in a modulation of the refractive index contrast and the absorption coefficient for the waveguide at the frequency of the light. By carefully adjusting the composition of the semiconducting...... components and the applied electric field in relation to the frequency of the modulated radiation, the bending losses (and possibly coupling losses) will provide extinction of light guided by the bent waveguide section. The refractive index contract may be modulated while keeping the absorption coefficient......The present invention relates to a method and a device for modulating optical signals based on modulating bending losses in bend, quantum well semiconductor waveguide sections. The complex refractive index of the optical active semiconducting components of the waveguide section is modulated...

Modulating wind power plant output using different frequency modulation components for damping grid oscillations

DEFF Research Database (Denmark)

2017-01-01

A method, controller, wind power plant, and computer program product are disclosed for operating a wind power plant comprising a plurality of wind turbines, the wind power plant producing a plant power output. The method comprises receiving a modulation request signal indicating a requested...... modulation of the plant power output, the requested modulation specifying a modulation frequency. The method further comprises generating a respective power reference signal for each of at least two wind turbines of the plurality of wind turbines selected to fulfill the requested modulation, Each generated...... power reference signal includes a respective modulation component corresponding to a portion of the requested modulation and having a frequency different than the modulation frequency....

Modulational effects in accelerators

International Nuclear Information System (INIS)

Satogata, T.

1997-01-01

We discuss effects of field modulations in accelerators, specifically those that can be used for operational beam diagnostics and beam halo control. In transverse beam dynamics, combined effects of nonlinear resonances and tune modulations influence diffusion rates with applied tune modulation has been demonstrated. In the longitudinal domain, applied RF phase and voltage modulations provide mechanisms for parasitic halo transport, useful in slow crystal extraction. Experimental experiences with transverse tune and RF modulations are also discussed

A design of optical modulation system with pixel-level modulation accuracy

Science.gov (United States)

Zheng, Shiwei; Qu, Xinghua; Feng, Wei; Liang, Baoqiu

2018-01-01

Vision measurement has been widely used in the field of dimensional measurement and surface metrology. However, traditional methods of vision measurement have many limits such as low dynamic range and poor reconfigurability. The optical modulation system before image formation has the advantage of high dynamic range, high accuracy and more flexibility, and the modulation accuracy is the key parameter which determines the accuracy and effectiveness of optical modulation system. In this paper, an optical modulation system with pixel level accuracy is designed and built based on multi-points reflective imaging theory and digital micromirror device (DMD). The system consisted of digital micromirror device, CCD camera and lens. Firstly we achieved accurate pixel-to-pixel correspondence between the DMD mirrors and the CCD pixels by moire fringe and an image processing of sampling and interpolation. Then we built three coordinate systems and calculated the mathematic relationship between the coordinate of digital micro-mirror and CCD pixels using a checkerboard pattern. A verification experiment proves that the correspondence error is less than 0.5 pixel. The results show that the modulation accuracy of system meets the requirements of modulation. Furthermore, the high reflecting edge of a metal circular piece can be detected using the system, which proves the effectiveness of the optical modulation system.

Browse Title Index

African Journals Online (AJOL)

Items 1 - 50 of 101 ... Vol 10, No 1-2 (2014), A blueprint for agricultural development in Nigeria, Abstract PDF ... Vol 10, No 1-2 (2014), Awareness and effects of climate change on cocoa production in Ondo State, ... I. B Alebiosu, G. O. Olatunde, O. O. R. Pitan ... Fertilizer Interaction on the Growth and Yield of Maize (Zea mays.

Author Details

African Journals Online (AJOL)

Adewusi, Felix A. Vol 14, No 1 (2017) - Articles Improving users loyalty in the digital age in some libraries in Ondo state, Nigeria Abstract. ISSN: 1597-4316. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of ...

Author Details

African Journals Online (AJOL)

Kayode, O.J.. Vol 10, No 1 (2008) - Articles A binary logistic regression model for the adoption of electronic banking in Akure, Ondo State Abstract PDF. ISSN: 0794-4896. AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and ...

Development Of Rainfall Erosivity Map For Nigeria | Ogedengbe ...

African Journals Online (AJOL)

The indices were used to develop a rainfall erosivity map or Nigeria. The map reveals that Nigeria may be broadly divided into five major erosion risk zones. The south-western part is generally in the low erosion zone, with the exception of the coastal portion of Lagos, Ondo, Edo and Delta states. The south-east and central ...

Mixed twistor D-modules

CERN Document Server

Mochizuki, Takuro

2015-01-01

We introduce mixed twistor D-modules and establish their fundamental functorial properties. We also prove that they can be described as the gluing of admissible variations of mixed twistor structures. In a sense, mixed twistor D-modules can be regarded as a twistor version of M. Saito's mixed Hodge modules. Alternatively, they can be viewed as a mixed version of the pure twistor D-modules studied by C. Sabbah and the author. The theory of mixed twistor D-modules is one of the ultimate goals in the study suggested by Simpson's Meta Theorem, and it would form a foundation for the Hodge theory of holonomic D-modules which are not necessarily regular singular.  .

Solar energy modulator

Science.gov (United States)

Hale, R. R. (Inventor); Mcdougal, A. R.

1984-01-01

A module is described with a receiver having a solar energy acceptance opening and supported by a mounting ring along the optic axis of a parabolic mirror in coaxial alignment for receiving solar energy from the mirror, and a solar flux modulator plate for varying the quantity of solar energy flux received by the acceptance opening of the module. The modulator plate is characterized by an annular, plate-like body, the internal diameter of which is equal to or slightly greater than the diameter of the solar energy acceptance opening of the receiver. Slave cylinders are connected to the modulator plate for supporting the plate for axial displacement along the axis of the mirror, therby shading the opening with respect to solar energy flux reflected from the surface of the mirror to the solar energy acceptance opening.

Integrated unaligned resonant modulator tuning

Energy Technology Data Exchange (ETDEWEB)

Zortman, William A.; Lentine, Anthony L.

2017-10-03

Methods and systems for tuning a resonant modulator are disclosed. One method includes receiving a carrier signal modulated by the resonant modulator with a stream of data having an approximately equal number of high and low bits, determining an average power of the modulated carrier signal, comparing the average power to a predetermined threshold, and operating a tuning device coupled to the resonant modulator based on the comparison of the average power and the predetermined threshold. One system includes an input structure, a plurality of processing elements, and a digital control element. The input structure is configured to receive, from the resonant modulator, a modulated carrier signal. The plurality of processing elements are configured to determine an average power of the modulated carrier signal. The digital control element is configured to operate a tuning device coupled to the resonant modulator based on the average power of the modulated carrier signal.

Module-Amenability on Module Extension Banach Algebras

Directory of Open Access Journals (Sweden)

Davood Ebrahimi Bagha

2014-05-01

Full Text Available Let $A$ be a Banach algebra and $E$ be a Banach‎ ‎$A$-bimodule then $S=A\\oplus E$‎, ‎the $l^1$-direct sum of $A$ and $E$‎ ‎becomes a module extension Banach algebra when equipped with the‎ ‎algebras product $ (a‎ , ‎x‎. ‎(a'‎, ‎x' = (aa'‎ , ‎a.x'‎ + ‎x.a'$‎. ‎In this‎ ‎paper‎, ‎we investigate $\\triangle$-amenability for these Banach‎ ‎algebras and we show that for discrete inverse semigroup $S$ with‎ ‎the set of idempotents $E_{S}$‎, ‎the module extension Banach algebra $S=l^{1} (E_{S} \\op l^{1} (S$ is $ \\tr$-amenable‎ ‎as a $l^{1}(E_{S} $-module if and only if $l^{1}(E_{S}$ is amenable as Banach algebra‎.

Energy rating procedure for PV-modules; Energy rating procedure voor PV-modules

Energy Technology Data Exchange (ETDEWEB)

Van der Borg, N.J.C.M.; Jansen, M.J. [ECN Zon, Petten (Netherlands)

2005-10-15

The performance of PV-modules is usually characterized by the nominal power at standard test conditions. However more relevant for the end-user is the energy production. To arrive at a so-called energy rating procedure the P(G{sub i},T{sub m}) matrix is defined, which makes it possible to calculate the expected annual energy production of a PV-module at any given location with known frequency distribution of horizontal irradiation and ambient temperature. In order to make the de P(G{sub i},T{sub m}) independent of the time and location of the tests the effective irradiation (G{sub i}) is measured with a device with the same characteristics as the module under test. Such a device can be a suitable reference cell or, even better, the module under test itself. The latter, however, is only possible in case the module under test is stable in time. Measurements were performed to test the applicability of the so-called self-reference for a-Si modules. Furthermore the difference between the effective irradiance and the real irradiance (measured with a pyranometer) was quantified for the test location Petten, the Netherlands. The conclusions are: Self-reference is not applicable for a-Si modules because of the time instability, even after 1 full year of degradation; Self-reference signals (the short circuit current of the module under test) can be calibrated outdoor by comparison with a pyranometer at irradiance levels above 800 W/m{sup 2}. The uncertainty of such a calibration is within 3%; The difference between the effective irradiance and the real irradiance on annual basis at Petten is virtually zero for x-Si modules and about 1% for a-Si modules. [Dutch] Het is gebruikelijk om de prestatie van PV-modules te karakteriseren met het nominale vermogen onder standaard testcondities (STC). Echter dit nominaal vermogen geeft geen directe indicatie voor de energieopbrengst. Om tot een karakteristiek voor de energie-opbrengst (energy rating) te komen wordt de prestatie van de

Pulse power modulators - an overview

International Nuclear Information System (INIS)

Venkatramani, N.

2006-01-01

Pulse power modulators are electronic devices to provide, high voltage, high current, power bursts. Ideally, a modulator, with the means to shape and control the pulses, acts as a switch between a high voltage power supply and its load. This article gives an overview of the pulse power modulators: starting with the basics of pulse and modulation, it covers modulation topologies, different types of modulators, major subsystems and pulse measurement techniques. The various applications of pulse power modulators and the recent trends have been included at the end. (author)

Frames in super Hilbert modules

Directory of Open Access Journals (Sweden)

Mehdi Rashidi-Kouchi

2018-01-01

Full Text Available In this paper, we define super Hilbert module and investigate frames in this space. Super Hilbert modules are  generalization of super Hilbert spaces in Hilbert C*-module setting. Also, we define frames in a super Hilbert module and characterize them by using of the concept of g-frames in a Hilbert C*-module. Finally, disjoint frames in Hilbert C*-modules are introduced and investigated.

Some Ondo Philosophical Proverbs for Practical

African Journals Online (AJOL)

Nekky Umera

Here we shall define philosophy in general terms and ..... he is so worried, he replies that the oil they are pouring is going into the eye of a sick ... buttresses his concern: 'When the eye is in trouble, the nose too is in trouble'. The problem of the ...

1839-IJBCS-Article-Ondo Ovono Paul

African Journals Online (AJOL)

hp

Chrysopidae,. Hemerobiidae). Les individus appartenant à ces familles sont des insectes qualifiés d'auxiliaires, car ils s'attaquent à un ou à plusieurs insectes ravageurs des cultures assurant ainsi un certain équilibre au sein des parcelles agricoles ...

Ammonia corrodes solar modules; Salmiakgeist greift Module an

Energy Technology Data Exchange (ETDEWEB)

Petzold, Katrin

2011-07-01

Ammonia is an aggressive gas produced in animal shelters, which may cause corrosion of solar modules. Various institutions, e.g. DLG and TUeV Rheinland, therefore offer an ammonia test for solar modules. The TUeV Rheinland recently commissioned a walk-in test chamber and now issues an official seal of approval, while the DLG doubts the practical value of the test.

CDC 6600 Cordwood Module

CERN Multimedia

1964-01-01

The CDC 6600 cordwood module containing 64 silicon transistors. The module was mounted between two plates that were cooled conductive by a refrigeration unit via the front panel. The construction of this module uses the cord method, so called because the resistors seem to be stacked like cord between the two circuit boards in order to obtain a high density. The 6600 model contained nearly 6,000 such modules.

A photovoltaic module

DEFF Research Database (Denmark)

2013-01-01

The present invention relates to a photovoltaic module comprising a carrier substrate, said carrier substrate carrying a purely printed structure comprising printed positive and negative module terminals, a plurality of printed photovoltaic cell units each comprising one or more printed...... photovoltaic cells, wherein the plurality of printed photovoltaic cell units are electrically connected in series between the positive and the negative module terminals such that any two neighbouring photovoltaic cell units are electrically connected by a printed interconnecting electrical conductor....... The carrier substrate comprises a foil and the total thickness of the photovoltaic module is below 500 [mu]m. Moreover, the nominal voltage level between the positive and the negative terminals is at least 5 kV DC....

Modulated Source Interferometry with Combined Amplitude and Frequency Modulation

Science.gov (United States)

Gutierrez, Roman C. (Inventor)

1998-01-01

An improved interferometer is produced by modifying a conventional interferometer to include amplitude and/or frequency modulation of a coherent light source at radio or higher frequencies. The phase of the modulation signal can be detected in an interfering beam from an interferometer and can be used to determine the actual optical phase of the beam. As such, this improvement can be adapted to virtually any two-beam interferometer, including: Michelson, Mach-Zehnder, and Sagnac interferometers. The use of an amplitude modulated coherent tight source results in an interferometer that combines the wide range advantages of coherent interferometry with the precise distance measurement advantages of white light interferometry.

Laser frequency modulator for modulating a laser cavity

Science.gov (United States)

Erbert, Gaylen V.

1992-01-01

The present invention relates to a laser frequency modulator for modulating a laser cavity. It is known in the prior art to utilize a PZT (piezoelectric transducer) element in combination with a mirror to change the cavity length of a laser cavity (which changes the laser frequency). Using a PZT element to drive the mirror directly is adequate at frequencies below 10 kHz. However, in high frequency applications (100 kHz and higher) PZT elements alone do not provide a sufficient change in the cavity length. The present invention utilizes an ultrasonic concentrator with a PZT element and mirror to provide modulation of the laser cavity. With an ultrasonic concentrator, the mirror element at the end of a laser cavity can move at larger amplitudes and higher frequencies.

On staggered indecomposable Virasoro modules

International Nuclear Information System (INIS)

Kytoelae, Kalle; Ridout, David

2009-01-01

In this article, certain indecomposable Virasoro modules are studied. Specifically, the Virasoro mode L 0 is assumed to be nondiagonalizable, possessing Jordan blocks of rank 2. Moreover, the module is further assumed to have a highest weight submodule, the 'left module', and that the quotient by this submodule yields another highest weight module, the 'right module'. Such modules, which have been called staggered, have appeared repeatedly in the logarithmic conformal field theory literature, but their theory has not been explored in full generality. Here, such a theory is developed for the Virasoro algebra using rather elementary techniques. The focus centers on two different but related questions typically encountered in practical studies: How can one identify a given staggered module, and how can one demonstrate the existence of a proposed staggered module. Given just the values of the highest weights of the left and right modules, themselves subject to simple necessary conditions, invariants are defined which together with the knowledge of the left and right modules uniquely identify a staggered module. The possible values of these invariants form a vector space of dimension 0, 1, or 2, and the structures of the left and right modules limit the isomorphism classes of the corresponding staggered modules to an affine subspace (possibly empty). The number of invariants and affine restrictions is purely determined by the structures of the left and right modules. Moreover, in order to facilitate applications, the expressions for the invariants and restrictions are given by formulas as explicit as possible (they generally rely on expressions for Virasoro singular vectors). Finally, the text is liberally peppered throughout with examples illustrating the general concepts. These have been carefully chosen for their physical relevance or for the novel features they exhibit.

On staggered indecomposable Virasoro modules

Energy Technology Data Exchange (ETDEWEB)

Kytoelae, Kalle [Geneve Univ. (Switzerland); Ridout, David [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2009-06-15

In this article, certain indecomposable Virasoro modules are studied. Specifically, the Virasoro mode L0 is assumed to be non-diagonalisable, possessing Jordan blocks of rank two. Moreover, the module is further assumed to have a highest weight submodule, the ''left module'', and that the quotient by this submodule yields another highest weight module, the ''right module''. Such modules, which have been called staggered, have appeared repeatedly in the logarithmic conformal field theory literature, but their theory has not been explored in full generality. Here, such a theory is developed for the Virasoro algebra using rather elementary techniques. The focus centres on two different but related questions typically encountered in practical studies: How can one identify a given staggered module, and how can one demonstrate the existence of a proposed staggered module. Given just the values of the highest weights of the left and right modules, themselves subject to simple necessary conditions, invariants are defined which together with the knowledge of the left and right modules uniquely identify a staggered module. The possible values of these invariants form a vector space of dimension zero, one or two, and the structures of the left and right modules limit the isomorphism classes of the corresponding staggered modules to an affine subspace (possibly empty). The number of invariants and affine restrictions is purely determined by the structures of the left and right modules. Moreover, in order to facilitate applications, the expressions for the invariants and restrictions are given by formulae as explicit as possible (they generally rely on expressions for Virasoro singular vectors). Finally, the text is liberally peppered throughout with examples illustrating the general concepts. These have been carefully chosen for their physical relevance or for the novel features they exhibit. (orig.)

On staggered indecomposable Virasoro modules

International Nuclear Information System (INIS)

Kytoelae, Kalle; Ridout, David

2009-06-01

In this article, certain indecomposable Virasoro modules are studied. Specifically, the Virasoro mode L0 is assumed to be non-diagonalisable, possessing Jordan blocks of rank two. Moreover, the module is further assumed to have a highest weight submodule, the ''left module'', and that the quotient by this submodule yields another highest weight module, the ''right module''. Such modules, which have been called staggered, have appeared repeatedly in the logarithmic conformal field theory literature, but their theory has not been explored in full generality. Here, such a theory is developed for the Virasoro algebra using rather elementary techniques. The focus centres on two different but related questions typically encountered in practical studies: How can one identify a given staggered module, and how can one demonstrate the existence of a proposed staggered module. Given just the values of the highest weights of the left and right modules, themselves subject to simple necessary conditions, invariants are defined which together with the knowledge of the left and right modules uniquely identify a staggered module. The possible values of these invariants form a vector space of dimension zero, one or two, and the structures of the left and right modules limit the isomorphism classes of the corresponding staggered modules to an affine subspace (possibly empty). The number of invariants and affine restrictions is purely determined by the structures of the left and right modules. Moreover, in order to facilitate applications, the expressions for the invariants and restrictions are given by formulae as explicit as possible (they generally rely on expressions for Virasoro singular vectors). Finally, the text is liberally peppered throughout with examples illustrating the general concepts. These have been carefully chosen for their physical relevance or for the novel features they exhibit. (orig.)

On staggered indecomposable Virasoro modules

Science.gov (United States)

Kytölä, Kalle; Ridout, David

2009-12-01

In this article, certain indecomposable Virasoro modules are studied. Specifically, the Virasoro mode L0 is assumed to be nondiagonalizable, possessing Jordan blocks of rank 2. Moreover, the module is further assumed to have a highest weight submodule, the "left module," and that the quotient by this submodule yields another highest weight module, the "right module." Such modules, which have been called staggered, have appeared repeatedly in the logarithmic conformal field theory literature, but their theory has not been explored in full generality. Here, such a theory is developed for the Virasoro algebra using rather elementary techniques. The focus centers on two different but related questions typically encountered in practical studies: How can one identify a given staggered module, and how can one demonstrate the existence of a proposed staggered module. Given just the values of the highest weights of the left and right modules, themselves subject to simple necessary conditions, invariants are defined which together with the knowledge of the left and right modules uniquely identify a staggered module. The possible values of these invariants form a vector space of dimension 0, 1, or 2, and the structures of the left and right modules limit the isomorphism classes of the corresponding staggered modules to an affine subspace (possibly empty). The number of invariants and affine restrictions is purely determined by the structures of the left and right modules. Moreover, in order to facilitate applications, the expressions for the invariants and restrictions are given by formulas as explicit as possible (they generally rely on expressions for Virasoro singular vectors). Finally, the text is liberally peppered throughout with examples illustrating the general concepts. These have been carefully chosen for their physical relevance or for the novel features they exhibit.

Nice module. Apollon Solar present their new line of solar modules; Nettes Modul. Apollon Solar stellt Linie fuer neuartige Modultechnologie vor

Energy Technology Data Exchange (ETDEWEB)

Podewils, C.

2008-06-15

Solar modules, TGV engines and perfume Zerstaeuber seem to have nothing in common. The new solar module developed by French producer Apollon Solar makes use of both technologies in the construction process. The contribution presents the 'Nice' module which has many new features. (orig.)

Measuring high-frequency responses of an electro-optic phase modulator based on dispersion induced phase modulation to intensity modulation conversion

Science.gov (United States)

Zhang, Shangjian; Wang, Heng; Wang, Yani; Zou, Xinhai; Zhang, Yali; Liu, Shuang; Liu, Yong

2014-11-01

We investigate the phase modulation to intensity modulation conversion in dispersive fibers for measuring frequency responses of electro-optic phase modulators, and demonstrate two typical measurements with cascade path and fold-back path. The measured results achieve an uncertainty of less than 2.8% within 20 GHz. Our measurements show stable and repeatable results because the optical carrier and its phase-modulated sidebands are affected by the same fiber impairments. The proposed method requires only dispersive fibers and works without any small-signal assumption, which is applicable for swept frequency measurement at different driving levels and operating wavelengths.

A retrospective study on fourteen year hemoglobin genotype ...

African Journals Online (AJOL)

This suggests the possibility of many other residents in the capital city of Ondo state carrying the abnormal forms of hemoglobin genotype, and calling for more efforts in the area of genetic counseling. The gene frequencies of A, S, and C were 0.91, 0.08 and 0.01, respectively. The prevalence of HbAA in this study has been ...

Abundance of birds in six selected habitats | Ogunsusi | Journal of ...

African Journals Online (AJOL)

Study conducted in the forested bitumen belt of Ode-Irele, Ondo state, Nigeria evaluated habitat use by birds using 20- minutes birds point count to a radius of 30 meters, carried out in six selected habitats. The vegetation cover was sampled using 5x5-meters and 1m2quadrants. Data collected were subjected to t-test of ...

JOURNAL OF RELIGION 2014 CURVEEE

African Journals Online (AJOL)

IK

Human security threats in the South East of Nigeria has continued to be on the increase in spite of the fact that ... The impact of these threats have often been so far .... now a daily occurrence in Lagos, Ondo, Oyo and many other states in the country ... Human trafficking according to Ajih (2008), is referred to as a modern day.

Modulating lignin in plants

Science.gov (United States)

Apuya, Nestor; Bobzin, Steven Craig; Okamuro, Jack; Zhang, Ke

2013-01-29

Materials and methods for modulating (e.g., increasing or decreasing) lignin content in plants are disclosed. For example, nucleic acids encoding lignin-modulating polypeptides are disclosed as well as methods for using such nucleic acids to generate transgenic plants having a modulated lignin content.

Growth Modulation in Achondroplasia.

Science.gov (United States)

McClure, Philip K; Kilinc, Eray; Birch, John G

2017-09-01

Achondroplasia is the most common skeletal dysplasia with a rate of nearly 1/10,000. The development of lower extremity deformity is well documented, and various modes of correction have been reported. There are no reports on the use of growth modulation to correct angular deformity in achondroplasia. Medical Records from 1985 to 2015 were reviewed for the diagnosis of achondroplasia and growth modulation procedures. Patients who had been treated for angular deformity of the legs by growth modulation were identified. A detailed analysis of their medical record and preoperative and final lower extremity radiographs was completed. Four patients underwent growth modulation procedures, all to correct existing varus deformity of the legs. Three of the 4 patients underwent bilateral distal femoral and proximal tibial growth modulation. The remaining patient underwent tibial correction only. Two of the 4 patients had a combined proximal fibular epiphysiodesis. All limbs had some improvement of alignment; however, 1 patient went on to bilateral osteotomies. Only 1 limb corrected to a neutral axis with growth modulation alone at last follow-up, initial implantation was done before 5 years of age. Growth modulation is an effective means for deformity correction in the setting of achondroplasia. However implantation may need to be done earlier than would be typical for patients without achondroplasia. Osteotomy may still be required after growth modulation for incomplete correction.

Whole Module Offgas Test Report: Space-X Dragon Module

Science.gov (United States)

James, John T.

2012-01-01

Between 7 April and 11 April 2012 a chemist from the JSC Toxicology Group acquired samples of air in 500 ml evacuated canisters from the sealed Dragon Module at the Space-X facility at KSC. Three samples were taken of facility air (two before the test and one after the test), and a total of 9 samples were taken from the sealed module in triplicate at the following times: 0 hours, 48 hours, and 96 hours. The module contained 470 kg, which was 100% of the mass to be launched. Analytical data contained in the Toxicology Group Report (attached) show that the ambient facility air was clean except for almost 9 milligrams per cubic meter of isopropanol (IPA) in the sample taken at the end of the test. Space-X must ensure that IPA is not introduced into the module before it is sealed for launch. Other minor contaminants in the ambient air included the following: perfluoro(2-methyl)pentane and hexamethylcyclotrisiloxane. The first-acquired samples of each triplicate from the module were not analyzed. Analyses of pairs of samples that were taken during the test show excellent agreement between the pairs and a linear increase in the T-values during the 4 days of the test (figure below). The rate of increase averaged 0.124 T units per day. If the time from last purge of the module on the ground to crew first entry on orbit is 10 days, then the T value at first entry should be less than 1.2 units, which is well below the criterion of 3.0 for consideration of additional protection of the crew from offgas products. The primary contributors were as follows: trimethylsilanol (0.057), fluorotrimethylsilane (0.047), acetaldehyde (0.004), hexamethylcyclopentasiloxane (0.003), and toluene (0.002).

Bunch identification module

International Nuclear Information System (INIS)

Fox, J.D.

1981-01-01

This module provides bunch identification and timing signals for the PEP Interaction areas. Timing information is referenced to the PEP master oscillator, and adjusted in phase as a function of region. Identification signals are generated in a manner that allows observers in all interaction regions to agree on an unambiguous bunch identity. The module provides bunch identification signals via NIM level logic, upon CAMAC command, and through LED indicators. A front panel ''region select'' switch allows the same module to be used in all regions. The module has two modes of operation: a bunch identification mode and a calibration mode. In the identification mode, signals indicate which of the three bunches of electrons and positrons are interacting, and timing information about beam crossing is provided. The calibration mode is provided to assist experimenters making time of flight measurements. In the calibration mode, three distinct gating signals are referenced to a selected bunch, allowing three timing systems to be calibrated against a common standard. Physically, the bunch identifier is constructed as a single width CAMAC module. 2 figs., 1 tab

Crossed modules of racks

OpenAIRE

Crans, Alissa S.; Wagemann, Friedrich

2014-01-01

We generalize the notion of a crossed module of groups to that of a crossed module of racks. We investigate the relation to categorified racks, namely strict 2-racks, and trunk-like objects in the category of racks, generalizing the relation between crossed modules of groups and strict 2-groups. Then we explore topological applications. We show that by applying the rack-space functor, a crossed module of racks gives rise to a covering. Our main result shows how the fundamental racks associate...

Study of curved glass photovoltaic module and module electrical isolation design requirements

Science.gov (United States)

1980-06-01

The design of a 1.2 by 2.4 m curved glass superstrate and support clip assembly is presented, along with the results of finite element computer analysis and a glass industry survey conducted to assess the technical and economic feasibility of the concept. Installed costs for four curved glass module array configurations are estimated and compared with cost previously reported for comparable flat glass module configurations. Electrical properties of candidate module encapsulation systems are evaluated along with present industry practice for the design and testing of electrical insulation systems. Electric design requirements for module encapsulation systems are also discussed.

Module-theoretic properties of reachability modules for SRIQ

CSIR Research Space (South Africa)

Nortje, R

2013-07-01

Full Text Available ]. Definition 1. (Module for the arbitrary DL L) Let L be an arbitrary de- scription language, O an L ontology, and σ a statement formulated in L. Then, 2 O′ ⊆ O is a module for σ in O(a σ-module in O) whenever: O |= σ if and only if O′ |= σ. Definition 1... > 1, a SRIQ TBox T is in normal form if every axiom α ∈ T is in one of the following forms: α1: B1 u . . . uBn v C1 unionsq . . . unionsq Cm α2: D v C1 unionsq . . . unionsq Cm α3: B1 u . . . uBn v D α4: R1 ◦ . . . ◦Rn v Rn+1 α5: R1 v R2 α6: D1 v D2 α7...

Multiplication modules over non-commutative rings

International Nuclear Information System (INIS)

Tuganbaev, A A

2003-01-01

It is proved that each submodule of a multiplication module over a regular ring is a multiplicative module. If A is a ring with commutative multiplication of right ideals, then each projective right ideal is a multiplicative module, and a finitely generated A-module M is a multiplicative module if and only if all its localizations with respect to maximal right ideals of A are cyclic modules over the corresponding localizations of A. In addition, several known results on multiplication modules over commutative rings are extended to modules over not necessarily commutative rings

Multilevel Modulation formats for Optical Communication

DEFF Research Database (Denmark)

Jensen, Jesper Bevensee

2008-01-01

This thesis studies the use of multilevel modulation formats for optical communication systems. Multilevel modulation is an attractive method of increasing the spectral efficiency of optical communication systems. Various modulation formats employing phase modulation, amplitude modulation...... or a combination of the two have been studied. The use of polarization multiplexing (PolMux) to double the bit rate has also been investigated. The impact of transmission impairments such as chromatic dispersion, self phase modulation and cross phase modulation has been investigated. The feasibility of multilevel...... modulation for network oriented scenarios has been demonstrated....

Calibration-free absolute frequency response measurement of directly modulated lasers based on additional modulation.

Science.gov (United States)

Zhang, Shangjian; Zou, Xinhai; Wang, Heng; Zhang, Yali; Lu, Rongguo; Liu, Yong

2015-10-15

A calibration-free electrical method is proposed for measuring the absolute frequency response of directly modulated semiconductor lasers based on additional modulation. The method achieves the electrical domain measurement of the modulation index of directly modulated lasers without the need for correcting the responsivity fluctuation in the photodetection. Moreover, it doubles measuring frequency range by setting a specific frequency relationship between the direct and additional modulation. Both the absolute and relative frequency response of semiconductor lasers are experimentally measured from the electrical spectrum of the twice-modulated optical signal, and the measured results are compared to those obtained with conventional methods to check the consistency. The proposed method provides calibration-free and accurate measurement for high-speed semiconductor lasers with high-resolution electrical spectrum analysis.

Stochastic temperature modulation: A new technique in temperature-modulated DSC

International Nuclear Information System (INIS)

Schawe, J.E.K.; Huetter, T.; Heitz, C.; Alig, I.; Lellinger, D.

2006-01-01

A new temperature-modulated differential scanning calorimetry (TMDSC) technique is introduced. The technique is based on stochastic temperature modulation and has been developed as a consequence of a generalized theory of a temperature-modulated DSC. The quasi-static heat capacity and the frequency-dependent complex heat capacity can be determined over a wide frequency range in one single measurement without further calibration. Furthermore, the reversing and non-reversing heat flows are determined directly from the measured data. Examples show the frequency dependence of the glass transition, the isothermal curing of thermosets and a solid-solid transition

An investigation into modulators

International Nuclear Information System (INIS)

Heine, E.

1988-01-01

In the framework of the MEA-update it is important to establish which modulators are necessary. In this report it is lookedif the existing modulators can be maintained or new modulators have to be made. Besides technical aspects also material expenses and necessary manpower play a role. 12 figs.; 6 tabs

Modulated convection at high frequencies and large modulation amplitudes

International Nuclear Information System (INIS)

Swift, J.B.; Hohenberg, P.C.

1987-01-01

Modulated Rayleigh-Benard convection is analyzed for high frequencies and large modulation amplitudes. The linear theory of Gershuni and Zhukhovitskii is generalized to the nonlinear domain, and a subcritical bifurcation to convection is found in agreement with the experiments of Niemela and Donnelly. The crossover between the high-frequency (''Stokes layer'') regime and the low-frequency regime studied previously is analyzed

Spatial Terahertz Modulator

Science.gov (United States)

Xie, Zhenwei; Wang, Xinke; Ye, Jiasheng; Feng, Shengfei; Sun, Wenfeng; Akalin, Tahsin; Zhang, Yan

2013-11-01

Terahertz (THz) technology is a developing and promising candidate for biological imaging, security inspection and communications, due to the low photon energy, the high transparency and the broad band properties of the THz radiation. However, a major encountered bottleneck is lack of efficient devices to manipulate the THz wave, especially to modulate the THz wave front. A wave front modulator should allow the optical or electrical control of the spatial transmission (or reflection) of an input THz wave and hence the ability to encode the information in a wave front. Here we propose a spatial THz modulator (STM) to dynamically control the THz wave front with photo-generated carriers. A computer generated THz hologram is projected onto a silicon wafer by a conventional spatial light modulator (SLM). The corresponding photo-generated carrier spatial distribution will be induced, which forms an amplitude hologram to modulate the wave front of the input THz beam. Some special intensity patterns and vortex beams are generated by using this method. This all-optical controllable STM is structure free, high resolution and broadband. It is expected to be widely used in future THz imaging and communication systems.

Excavation of attractor modules for nasopharyngeal carcinoma via integrating systemic module inference with attract method.

Science.gov (United States)

Jiang, T; Jiang, C-Y; Shu, J-H; Xu, Y-J

2017-07-10

The molecular mechanism of nasopharyngeal carcinoma (NPC) is poorly understood and effective therapeutic approaches are needed. This research aimed to excavate the attractor modules involved in the progression of NPC and provide further understanding of the underlying mechanism of NPC. Based on the gene expression data of NPC, two specific protein-protein interaction networks for NPC and control conditions were re-weighted using Pearson correlation coefficient. Then, a systematic tracking of candidate modules was conducted on the re-weighted networks via cliques algorithm, and a total of 19 and 38 modules were separately identified from NPC and control networks, respectively. Among them, 8 pairs of modules with similar gene composition were selected, and 2 attractor modules were identified via the attract method. Functional analysis indicated that these two attractor modules participate in one common bioprocess of cell division. Based on the strategy of integrating systemic module inference with the attract method, we successfully identified 2 attractor modules. These attractor modules might play important roles in the molecular pathogenesis of NPC via affecting the bioprocess of cell division in a conjunct way. Further research is needed to explore the correlations between cell division and NPC.

XPM-induced degradation of multilevel phase modulated channel caused by neighboring NRZ modulated channels

DEFF Research Database (Denmark)

Jensen, Jesper Bevensee; Schiellerup, G.; Peucheret, Christophe

2008-01-01

The impact of XPM from NRZ modulated channels on an 8-level phase modulated channel in a WDM system was investigated. Requirements on launch power are found. 400 km transmission was achieved with negligible penalty.......The impact of XPM from NRZ modulated channels on an 8-level phase modulated channel in a WDM system was investigated. Requirements on launch power are found. 400 km transmission was achieved with negligible penalty....

FERMI multi-chip module

CERN Multimedia

This FERMI multi-chip module contains five million transistors. 25 000 of these modules will handle the flood of information through parts of the ATLAS and CMS detectors at the LHC. To select interesting events for recording, crucial decisions are taken before the data leaves the detector. FERMI modules are being developed at CERN in partnership with European industry.

Energy-efficient WDM-OFDM-PON employing shared OFDM modulation modules in optical line terminal.

Science.gov (United States)

Hu, Xiaofeng; Zhang, Liang; Cao, Pan; Wang, Kongtao; Su, Yikai

2012-03-26

We propose and experimentally demonstrate a scheme to improve the energy efficiency of wavelength division multiplexing - orthogonal frequency division multiplexing - passive optical networks (WDM-OFDM-PONs). By using an N × M opto-mechanic switch in optical line terminal (OLT), an OFDM modulation module is shared by several channels to deliver data to multiple users with low traffic demands during non-peak hours of the day, thus greatly reducing the number of operating devices and minimizing the energy consumption of the OLT. An experiment utilizing one OFDM modulation module to serve three optical network units (ONUs) in a WDM-OFDM-PON is performed to verify the feasibility of our proposal. Theoretical analysis and numerical calculation show that the proposed scheme can achieve a saving of 23.6% in the energy consumption of the OFDM modulation modules compared to conventional WDM-OFDM-PON.

FASTBUS Snoop Diagnostic Module

International Nuclear Information System (INIS)

Walz, H.V.; Downing, R.

1980-11-01

Development of the FASTBUS Snoop Module, undertaken as part of the prototype program for the new interlaboratory data bus standard, is described. The Snoop Module resides on a FASTBUS crate segment and provides diagnostic monitoring and testing capability. Communication with a remote host computer is handled independent of FASTBUS through a serial link. The module consists of a high-speed ECL front-end to monitor and single-step FASTBUS cycles, a master-slave interface, and a control microprocessor with serial communication ports. Design details and performance specifications of the prototype module are reported. 9 figures, 1 table

Model theory and modules

CERN Document Server

Prest, M

1988-01-01

In recent years the interplay between model theory and other branches of mathematics has led to many deep and intriguing results. In this, the first book on the topic, the theme is the interplay between model theory and the theory of modules. The book is intended to be a self-contained introduction to the subject and introduces the requisite model theory and module theory as it is needed. Dr Prest develops the basic ideas concerning what can be said about modules using the information which may be expressed in a first-order language. Later chapters discuss stability-theoretic aspects of module

High-modulation-efficiency, integrated waveguide modulator-laser diode at 448 nm

KAUST Repository

Shen, Chao

2016-01-25

To date, solid-state lighting (SSL), visible light communication (VLC) and optical clock generation functionalities in the blue-green color regime have been demonstrated based on discrete devices, including light-emitting diodes, laser diodes, and transverse-transmission modulators. This work presents the first integrated waveguide modulator-laser diode (IWM-LD) at 448 nm, offering the advantages of small-footprint, high-speed, and low power-consumption. A high modulation efficiency of 2.68 dB/V, deriving from a large extinction ratio of 9.4 dB and a low operating voltage range of 3.5 V, was measured. The electroabsorption characteristics revealed that the modulation effect, as observed from the red-shifting of the absorption edge, was resulted from the external-field-induced quantum-confined-Stark-effect (QCSE). A comparative analysis of the photocurrent versus wavelength spectra in semipolar- and polar-plane InGaN/GaN quantum wells (QWs) confirmed that the IWM-LD based on semipolar (20¯2 ¯1) QWs was able to operate in a manner similar to other III-V materials typically used in optical telecommunications, due to the reduced piezoelectric field. Utilizing the integrated modulator, a -3dB bandwidth of ~1 GHz was measured, and a data rate of 1 Gbit/s was demonstrated using on-off keying (OOK) modulation. Our experimental investigation highlighted the advantage of implementing the IWM-LD on the same semipolar QW epitaxy in enabling a high-efficiency platform for SSL-VLC dual-functionalities.

High-modulation-efficiency, integrated waveguide modulator-laser diode at 448 nm

KAUST Repository

Shen, Chao; Ng, Tien Khee; Leonard, John T.; Pourhashemi, Arash; Oubei, Hassan M.; Alias, Mohd Sharizal; Nakamura, Shuji; DenBaars, Steven P.; Speck, James S.; Alyamani, Ahmed Y.; Eldesouki, Munir M.; Ooi, Boon S.

2016-01-01

To date, solid-state lighting (SSL), visible light communication (VLC) and optical clock generation functionalities in the blue-green color regime have been demonstrated based on discrete devices, including light-emitting diodes, laser diodes, and transverse-transmission modulators. This work presents the first integrated waveguide modulator-laser diode (IWM-LD) at 448 nm, offering the advantages of small-footprint, high-speed, and low power-consumption. A high modulation efficiency of 2.68 dB/V, deriving from a large extinction ratio of 9.4 dB and a low operating voltage range of 3.5 V, was measured. The electroabsorption characteristics revealed that the modulation effect, as observed from the red-shifting of the absorption edge, was resulted from the external-field-induced quantum-confined-Stark-effect (QCSE). A comparative analysis of the photocurrent versus wavelength spectra in semipolar- and polar-plane InGaN/GaN quantum wells (QWs) confirmed that the IWM-LD based on semipolar (20¯2 ¯1) QWs was able to operate in a manner similar to other III-V materials typically used in optical telecommunications, due to the reduced piezoelectric field. Utilizing the integrated modulator, a -3dB bandwidth of ~1 GHz was measured, and a data rate of 1 Gbit/s was demonstrated using on-off keying (OOK) modulation. Our experimental investigation highlighted the advantage of implementing the IWM-LD on the same semipolar QW epitaxy in enabling a high-efficiency platform for SSL-VLC dual-functionalities.

Optical spectral reshaping for directly modulated 4-pulse amplitude modulation signals

DEFF Research Database (Denmark)

Ozolins, Oskars; Da Ros, Francesco; Cristofori, Valentina

2017-01-01

The tremendous traffic growth in intra/inter-datacenters requires low-cost high-speed integrated solutions [1]. To enable a significantly reduced footprint directly modulated lasers (DMLs) have been proposed instead of large external modulators. However, it is challenging to use DMLs due to their......The tremendous traffic growth in intra/inter-datacenters requires low-cost high-speed integrated solutions [1]. To enable a significantly reduced footprint directly modulated lasers (DMLs) have been proposed instead of large external modulators. However, it is challenging to use DMLs due...... (PAM) [3] signals. However, moving to 4-PAM,many of the impressive demonstrations reported so far rely heavily on off-line digital signal processing (DSP), which increases latency, power consumption and cost. In this talk, we report on (i) a detailed numerical analysis on the complex transfer function...... of the optical filter for optical spectral reshaping in case of pulse amplitude modulation and(ii) an experimental demonstration of real-time dispersion-uncompensated transmission of 10-GBd and 14-GBd 4-PAM signals up to 10- and 26-km SSMF. This is achieved by combining a commercial 10-Gb/s DML with optical...

Control module and module for priority set-up for the CAMAC universal branch driver

International Nuclear Information System (INIS)

Nguen Fuk; Smirnov, V.A.

1976-01-01

Control module of BKD-871 universal branch driver operates as a controller in the control crate. This module performs synchronous data transmission to (from) the computer and shapes time signals for A-type controllers. The following regimes of data block transmission may be organized with the help of the control module: address scanning regime; repeated reference regime; stop regime. A priority driving module is required for organization of simultaneous operation from several control sources

47 CFR 78.115 - Modulation limits.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Modulation limits. 78.115 Section 78.115... SERVICE Technical Regulations § 78.115 Modulation limits. (a) If amplitude modulation is employed, negative modulation peaks shall not exceed 100 percent modulation. [37 FR 3292, Feb. 12, 1972, as amended...

Low-cost solar module manufacturing

International Nuclear Information System (INIS)

Little, Roger G.; Nowlan, Michael J.; Matthei, Keith W.; Darkazalli, Ghazi

1997-01-01

As the market for terrestrial photovoltaic modules expands beyond the 80 MW per year level, module manufacturers are adopting a number of cost-reduction strategies, including the use of higher throughput equipment, increased process automation, and the fabrication of larger area cells and modules. This paper reviews recent activities at Spire Corporation in the development of advanced module manufacturing and testing equipment

Apparatuses to support photovoltaic modules

Science.gov (United States)

Ciasulli, John; Jones, Jason

2017-08-22

Methods and apparatuses to support photovoltaic ("PV") modules are described. A saddle bracket has a mounting surface to support one or more PV modules over a tube, a gusset coupled to the mounting surface, and a mounting feature coupled to the gusset to couple to the tube. A grounding washer has a first portion to couple to a support; and a second portion coupled to the first portion to provide a ground path to a PV module. A PV system has a saddle bracket; a PV module over the saddle bracket; and a grounding washer coupled to the saddle bracket and the PV module. Saddle brackets can be coupled to a torque tube at predetermined locations. PV modules can be coupled to the saddle brackets.

Identification of unstable network modules reveals disease modules associated with the progression of Alzheimer's disease.

Directory of Open Access Journals (Sweden)

Masataka Kikuchi

Full Text Available Alzheimer's disease (AD, the most common cause of dementia, is associated with aging, and it leads to neuron death. Deposits of amyloid β and aberrantly phosphorylated tau protein are known as pathological hallmarks of AD, but the underlying mechanisms have not yet been revealed. A high-throughput gene expression analysis previously showed that differentially expressed genes accompanying the progression of AD were more down-regulated than up-regulated in the later stages of AD. This suggested that the molecular networks and their constituent modules collapsed along with AD progression. In this study, by using gene expression profiles and protein interaction networks (PINs, we identified the PINs expressed in three brain regions: the entorhinal cortex (EC, hippocampus (HIP and superior frontal gyrus (SFG. Dividing the expressed PINs into modules, we examined the stability of the modules with AD progression and with normal aging. We found that in the AD modules, the constituent proteins, interactions and cellular functions were not maintained between consecutive stages through all brain regions. Interestingly, the modules were collapsed with AD progression, specifically in the EC region. By identifying the modules that were affected by AD pathology, we found the transcriptional regulation-associated modules that interact with the proteasome-associated module via UCHL5 hub protein, which is a deubiquitinating enzyme. Considering PINs as a system made of network modules, we found that the modules relevant to the transcriptional regulation are disrupted in the EC region, which affects the ubiquitin-proteasome system.

Control method for light deterioration of amorphous solar cell. Temperature effect method; Amorphous taiyo denchi no hikari rekka yokuseiho. Ondo kokaho

Energy Technology Data Exchange (ETDEWEB)

Fujimoto, H.; Yokoyama, S.; Itsumi, J. [Kumamoto Institute of Technology, Kumamoto (Japan)

1996-10-27

This paper describes a proposed method for suppressing light deterioration (temperature effect method), in which an annealing effect was always expected by laminating an NEM element and a heat insulation material on the back side of a-Si solar cell module and thereby raising the temperature in the back side of the module, and also describes an outdoor exposure test device completed for the method. The NEM element consisted of conductive potassium titanate and high molecular polymer and was a self temperature-controlling organic exothermic body that required no outside temperature control device. It was provided with a heat generating temperature of 45-75{degree}C as the exothermic property of the element and capable of generating heating temperature arbitrarily according to the purpose. The NEM element varied a resistance value against the ambient temperature and kept the element temperature constant. Measurement was commenced starting April 19, 1996, using the completed outdoor exposure test device and a measuring circuit. The deterioration phenomenon was and from then on continuously examined under the following conditions: (1) measurements were those of clear days only, and (2) measurements to be used were those between 10:00 and 14:00 with the quantity of solar radiation on a constant level. 4 refs., 4 figs., 1 tab.

Defect detection module

International Nuclear Information System (INIS)

Ernwein, R.; Westermann, G.

1986-01-01

The ''defect detector'' module is aimed at exceptional event or state recording. Foreseen for voltage presence monitoring on high supply voltage module of drift chambers, its characteristics can also show up the vanishing of supply voltage and take in account transitory fast signals [fr

Photoacoustic investigation of QCL modulation techniques

International Nuclear Information System (INIS)

Germer, M; Wolff, M

2010-01-01

High detection sensitivity and spectral selectivity is important for gas analysers to identify the measured compound and to detect low concentrations. We investigated three different modulation methods - pulse gate modulation, pulse frequency modulation and chopper modulation - for a new pulsed quantum cascade laser based photoacoustic sensor. The spectral selectivity and the detection limit for the three modulation methods are compared by measuring nitric oxide absorption lines and different concentrations. The highest detection sensitivity of 70 ppb was achieved with pulse gate modulation but at the lowest spectral resolution. The highest spectral resolution was achieved with chopper modulation but at the lowest detection sensitivity. It is demonstrated that for the three modulation methods a compromise has to be made between selectivity and sensitivity for each measuring task.

Optimization of Modulation Waveforms for Improved EMI Attenuation in Switching Frequency Modulated Power Converters

Directory of Open Access Journals (Sweden)

Deniss Stepins

2015-01-01

Full Text Available Electromagnetic interference (EMI is one of the major problems of switching power converters. This paper is devoted to switching frequency modulation used for conducted EMI suppression in switching power converters. Comprehensive theoretical analysis of switching power converter conducted EMI spectrum and EMI attenuation due the use of traditional ramp and multislope ramp modulation waveforms is presented. Expressions to calculate EMI spectrum and attenuation are derived. Optimization procedure of the multislope ramp modulation waveform is proposed to get maximum benefits from switching frequency modulation for EMI reduction. Experimental verification is also performed to prove that the optimized multislope ramp modulation waveform is very useful solution for effective EMI reduction in switching power converters.

Photovoltaic module and laminate

Science.gov (United States)

Bunea, Gabriela E.; Kim, Sung Dug; Kavulak, David F.J.

2018-04-10

A photovoltaic module is disclosed. The photovoltaic module has a first side directed toward the sun during normal operation and a second, lower side. The photovoltaic module comprises a perimeter frame and a photovoltaic laminate at least partially enclosed by and supported by the perimeter frame. The photovoltaic laminate comprises a transparent cover layer positioned toward the first side of the photovoltaic module, an upper encapsulant layer beneath and adhering to the cover layer, a plurality of photovoltaic solar cells beneath the upper encapsulant layer, the photovoltaic solar cells electrically interconnected, a lower encapsulant layer beneath the plurality of photovoltaic solar cells, the upper and lower encapsulant layers enclosing the plurality of photovoltaic solar cells, and a homogenous rear environmental protection layer, the rear environmental protection layer adhering to the lower encapsulant layer, the rear environmental protection layer exposed to the ambient environment on the second side of the photovoltaic module.

Bag-like contaminant control work module

International Nuclear Information System (INIS)

Buchanan, H.; Jacobson, E.B.

1982-01-01

A bag-like contaminant control work module is formed from a flexible impervious membrane which is inflated inside of an enclosed workspace to protect workers in the module from contaminants. The workspace, such as in a nuclear power steam generator, has a portal or manway opening into the workspace into which the module is secured by a module passageway. The module includes one or more glove boxes, in which the workers perform their assigned tasks after passing through the passageway and portal. The module includes one or more absolute filters allowing passage of air flow through the module passageway and into the workspace only through the filters. The module may include an auxiliary passageway secured to the outside of the module passageway and also secured in the portal opening and through which items can be passed back and forth to the worker in the glove box from outside the portal. The module is invertible so that it can be pulled out of the workspace trapping all the contaminants therein and disposed of without handling the contaminants

Bracket for photovoltaic modules

Science.gov (United States)

Ciasulli, John; Jones, Jason

2014-06-24

Brackets for photovoltaic ("PV") modules are described. In one embodiment, a saddle bracket has a mounting surface to support one or more PV modules over a tube, a gusset coupled to the mounting surface, and a mounting feature coupled to the gusset to couple to the tube. The gusset can have a first leg and a second leg extending at an angle relative to the mounting surface. Saddle brackets can be coupled to a torque tube at predetermined locations. PV modules can be coupled to the saddle brackets. The mounting feature can be coupled to the first gusset and configured to stand the one or more PV modules off the tube.

Cell-to-module optical loss/gain analysis for various photovoltaic module materials through systematic characterization

Science.gov (United States)

Hsian Saw, Min; Khoo, Yong Sheng; Singh, Jai Prakash; Wang, Yan

2017-08-01

Reducing levelized cost of electricity (LCOE) is important for solar photovoltaics to compete against other energy sources. Thus, the focus should not only be on improving the solar cell efficiency, but also on continuously reducing the losses (or achieving gain) in the cell-to-module process. This can be achieved by choosing the appropriate module material and design. This paper presents a detailed and systematic characterization of various photovoltaic (PV) module materials (encapsulants, tabbing ribbons, and backsheets) and an evaluation of their impact on the output power of silicon wafer-based PV modules. Various characterization tools/techniques, such as UV-vis (reflectance) measurement, external quantum efficiency (EQE) measurement and EQE line-scan are used. Based on the characterization results, we use module materials with the best-evaluated optical performance to build “optimized modules”. Compared to the standard mini-module, an optical gain of more than 5% is achievable for the “optimized module” with selected module materials.

Structural modules in AP1000 plant design

International Nuclear Information System (INIS)

Prasad, N.; Tunon-Sanjur, L.

2007-01-01

Structural modules are extensively used in AP1000 plant design. The shop manufacturing of modules components improves the quality and reliability of plant structures. The application of modules has a positive impact on construction schedules, and results in substantial savings in the construction cost. This paper describes various types of structural modules used for AP1000 plant structures. CA structural wall modules are steel plate modules with concrete placed, on or within the module, after module installation. The layout and design of the largest CA wall modules, CA01 and CA20, is described in detail. General discussion of structural floor modules, such as the composite and finned floors, is also included. Steel form CB modules (liners) consist of plate reinforced with angle stiffeners and tee sections. The angles and the tee sections are on the concrete side of the plate. Design of CB20 has been included as an example of CB type modules. Design codes and structural concepts related to module designs are discussed. (authors)

[Research of dual-photoelastic-modulator-based beat frequency modulation and Fourier-Bessel transform imaging spectrometer].

Science.gov (United States)

Wang, Zhi-Bin; Zhang, Rui; Wang, Yao-Li; Huang, Yan-Fei; Chen, You-Hua; Wang, Li-Fu; Yang, Qiang

2014-02-01

As the existing photoelastic-modulator(PEM) modulating frequency in the tens of kHz to hundreds of kHz between, leading to frequency of modulated interference signal is higher, so ordinary array detector cannot effectively caprure interference signal..A new beat frequency modulation method based on dual-photoelastic-modulator (Dual-PEM) and Fourier-Bessel transform is proposed as an key component of dual-photoelastic-modulator-based imaging spectrometer (Dual-PEM-IS) combined with charge coupled device (CCD). The dual-PEM are operated as an electro-optic circular retardance modulator, Operating the PEMs at slightly different resonant frequencies w1 and w2 respectively, generates a differential signal at a much lower heterodyne frequency that modulates the incident light. This method not only retains the advantages of the existing PEM, but also the frequency of modulated photocurrent decreased by 2-3 orders of magnitude (10-500 Hz) and can be detected by common array detector, and the incident light spectra can be obtained by Fourier-Bessel transform of low frequency component in the modulated signal. The method makes the PEM has the dual capability of imaging and spectral measurement. The basic principle is introduced, the basic equations is derived, and the feasibility is verified through the corresponding numerical simulation and experiment. This method has' potential applications in imaging spectrometer technology, and analysis of the effect of deviation of the optical path difference. This work provides the necessary theoretical basis for remote sensing of new Dual-PEM-IS and for engineering implementation of spectra inversion.

Comparing the effects of age on amplitude modulation and frequency modulation detection.

Science.gov (United States)

Wallaert, Nicolas; Moore, Brian C J; Lorenzi, Christian

2016-06-01

Frequency modulation (FM) and amplitude modulation (AM) detection thresholds were measured at 40 dB sensation level for young (22-28 yrs) and older (44-66 yrs) listeners with normal audiograms for a carrier frequency of 500 Hz and modulation rates of 2 and 20 Hz. The number of modulation cycles, N, varied between 2 and 9. For FM detection, uninformative AM at the same rate as the FM was superimposed to disrupt excitation-pattern cues. For both groups, AM and FM detection thresholds were lower for the 2-Hz than for the 20-Hz rate, and AM and FM detection thresholds decreased with increasing N. Thresholds were higher for older than for younger listeners, especially for FM detection at 2 Hz, possibly reflecting the effect of age on the use of temporal-fine-structure cues for 2-Hz FM detection. The effect of increasing N was similar across groups for both AM and FM. However, at 20 Hz, older listeners showed a greater effect of increasing N than younger listeners for both AM and FM. The results suggest that ageing reduces sensitivity to both excitation-pattern and temporal-fine-structure cues for modulation detection, but more so for the latter, while sparing temporal integration of these cues at low modulation rates.

Protective material for solar cell; Taiyo denchiyo hyomen hogozai

Energy Technology Data Exchange (ETDEWEB)

Iimura, M.; Domoto, T. [Nitto Denko Corp., Osaka (Japan)

1998-02-03

The protective material for the solar cell of this invention consists of fluororesin containing from 1 to 20wt% titanium oxide particles with the particle size range from 1 to 1,000nm. Surface contamination of the protective material for the solar cell and deterioration of the adhesive are prevented when titanium oxide with particular particle size is contained in the fluororesin in a particular range as mentioned above. Titanium oxide has photocatalytic performance to decompose organic substances, and the surface protective material for the solar cell containing titanium oxide can decompose and remove dirt such as dust adhering the surface for preventing surface contamination. In addition, total light permeability can be maintained at high rate and the permeability of less than 350nm ultraviolet rays causing deterioration of the adhesive can be decreased if the particle size and content of titanium oxide are specified. Titanium dioxide of anatase type crystal structure is ideal as the titanium oxide. 1 tab.

Photovoltaic concentrator module improvements study

Energy Technology Data Exchange (ETDEWEB)

Levy, S.L.; Kerschen, K.A. (Black and Veatch, Kansas City, MO (United States)); Hutchison, G. (Solar Kinetics, Inc., Dallas, TX (United States)); Nowlan, M.J. (Spire Corp., Bedford, MA (United States))

1991-08-01

This report presents results of a project to design and fabricate an improved photovoltaic concentrator module. Using previous work as a baseline, this study conducted analyses and testing to select major module components and design features. The lens parquet and concentrator solar cell were selected from the highest performing, available components. A single 185X point-focus module was fabricated by the project team and tested at Sandia. Major module characteristics include a 6 by 4 compression-molded acrylic lens parquet (0.737 m{sup 2} area), twenty-four 0.2 ohms-cm, FZ, p-Si solar cells (1.56 cm{sup 2} area) soldered to ceramic substrates and copper heat spreaders, and an aluminized steel housing with corrugated bottom. This project marked the first attempt to use prismatic covers on solar cells in a high-concentration, point-focus application. Cells with 15 percent metallization were obtained, but problems with the fabrication and placement of prismatic covers on these cells lead to the decision not to use covers in the prototype module. Cell assembly fabrication, module fabrication, and module optical design activities are presented here. Test results are also presented for bare cells, cell assemblies, and module. At operating conditions of 981 watts/m{sup 2} DNI and an estimated cell temperature of 65{degrees}C, the module demonstrated an efficiency of 13.9 percent prior to stressed environmental exposure. 12 refs., 56 figs., 7 tabs.

Modular crystals as modulated structures

DEFF Research Database (Denmark)

Elcoro, L.; Perez-Mato, J.M.; Friese, K.

2008-01-01

The use of the superspace formalism is extended to the description and refinement of the homologous series of modular structures with two symmetry-related modules with different orientations. The lillianite homologous series has been taken as a study case. Starting from a commensurate modulated...... composite description with two basic subsystems corresponding to the two different modules, it is shown how a more efficient description can be achieved using so-called zigzag modulation functions. These linear zigzag modulations, newly implemented in the program JANA2006, have very large fixed amplitudes...... and introduce in the starting model the two orientations of the underlying module sublattices. We show that a composite approach with this type of function, which treats the cations and anions as two separate subsystems forming a misfit compound, is the most appropriate and robust method for the refinements....

Multichip module technology for automotive application

Science.gov (United States)

Johnson, R. Wayne; Evans, John L.; Bosley, Larry

1995-01-01

Advancements in multichip module technology are creating design freedoms previously unavailable to design engineers. These advancements are opening new markets for laminate based multichip module products. In particular, material improvements in laminate printed wiring boards are allowing multichip module technology to meet more stringent environmental conditions. In addition, improvements in encapsulants and adhesives are enhancing the capabilities of multichip module technology to meet harsh environment. Furthermore, improvements in manufacturing techniques are providing the reliability improvements necessary for use in high quality electronic systems. These advances are making multichip module technology viable for high volume, harsh environment applications like under-the-hood automotive electronics. This paper will provide a brief review of multichip module technology, a discussion of specific research activities with Chrysler for use of multichip modules in automotive engine controllers and finally a discussion of prototype multichip modules fabricated and tested.

Compact electro-absorption modulator integrated with vertical-cavity surface-emitting laser for highly efficient millimeter-wave modulation

International Nuclear Information System (INIS)

Dalir, Hamed; Ahmed, Moustafa; Bakry, Ahmed; Koyama, Fumio

2014-01-01

We demonstrate a compact electro-absorption slow-light modulator laterally-integrated with an 850 nm vertical-cavity surface-emitting laser (VCSEL), which enables highly efficient millimeter-wave modulation. We found a strong leaky travelling wave in the lateral direction between the two cavities via widening the waveguide width with a taper shape. The small signal response of the fabricated device shows a large enhancement of over 55 dB in the modulation amplitude at frequencies beyond 35 GHz; thanks to the photon-photon resonance. A large group index of over 150 in a Bragg reflector waveguide enables the resonance at millimeter wave frequencies for 25 μm long compact modulator. Based on the modeling, we expect a resonant modulation at a higher frequency of 70 GHz. The resonant modulation in a compact slow-light modulator plays a significant key role for high efficient narrow-band modulation in the millimeter wave range far beyond the intrinsic modulation bandwidth of VCSELs.

Wide-range voltage modulation

International Nuclear Information System (INIS)

Rust, K.R.; Wilson, J.M.

1992-06-01

The Superconducting Super Collider's Medium Energy Booster Abort (MEBA) kicker modulator will supply a current pulse to the abort magnets which deflect the proton beam from the MEB ring into a designated beam stop. The abort kicker will be used extensively during testing of the Low Energy Booster (LEB) and the MEB rings. When the Collider is in full operation, the MEBA kicker modulator will abort the MEB beam in the event of a malfunction during the filling process. The modulator must generate a 14-μs wide pulse with a rise time of less than 1 μs, including the delay and jitter times. It must also be able to deliver a current pulse to the magnet proportional to the beam energy at any time during ramp-up of the accelerator. Tracking the beam energy, which increases from 12 GeV at injection to 200 GeV at extraction, requires the modulator to operate over a wide range of voltages (4 kV to 80 kV). A vacuum spark gap and a thyratron have been chosen for test and evaluation as candidate switches for the abort modulator. Modulator design, switching time delay, jitter and pre-fire data are presented

Second generation SLAC modulator

International Nuclear Information System (INIS)

Donaldson, A.R.; Cron, J.C.; Hanselman, R.R.

1986-06-01

The Stanford Linear Accelerator Laboratory has undertaken the construction of a single pass electron-positron collider. In order to reach required beam energy 235 new klystrons needed upgraded modulator systems. The collider will use 50 GeV electrons and positrons. The increase in accelerator energy from the present 30 GeV necessitates the replacement of existing 35 MW klystrons with new 67 MW units. The doubling of klystron output power required a redesign of the modulator system. The 67 MW klystron needs a 350 kV beam voltage pulse with a 3.7 μs pulse width. A new pulse transformer was designed to deliver the increased voltage and pulse width. Pulse cable design was evaluated to obtain increased reliability of that critical element. The modulator, with the exception of its power supply, was rebuilt to produce the required power increase while enhancing reliability and improving maintainability. An investigation of present thyratron switch tube performance under the new operating conditions resulted in agitation and some warranted panic but these conditions were mitigated after several successful experiments and some evolutionary narrowing of the klystron pulse width. The discussion will cover the upgraded modulator system specifications and some details of the new pulse transformer tank, pulse cable, modulator, and modulator switch tube

Ring resonator-based on-chip modulation transformer for high-performance phase-modulated microwave photonic links.

Science.gov (United States)

Zhuang, Leimeng; Taddei, Caterina; Hoekman, Marcel; Leinse, Arne; Heideman, René; van Dijk, Paulus; Roeloffzen, Chris

2013-11-04

In this paper, we propose and experimentally demonstrate a novel wideband on-chip photonic modulation transformer for phase-modulated microwave photonic links. The proposed device is able to transform phase-modulated optical signals into intensity-modulated versions (or vice versa) with nearly zero conversion of laser phase noise to intensity noise. It is constructed using waveguide-based ring resonators, which features simple architecture, stable operation, and easy reconfigurability. Beyond the stand-alone functionality, the proposed device can also be integrated with other functional building blocks of photonic integrated circuits (PICs) to create on-chip complex microwave photonic signal processors. As an application example, a PIC consisting of two such modulation transformers and a notch filter has been designed and realized in TriPleX(TM) waveguide technology. The realized device uses a 2 × 2 splitting circuit and 3 ring resonators with a free spectral range of 25 GHz, which are all equipped with continuous tuning elements. The device can perform phase-to-intensity modulation transform and carrier suppression simultaneously, which enables high-performance phase-modulated microwave photonics links (PM-MPLs). Associated with the bias-free and low-complexity advantages of the phase modulators, a single-fiber-span PM-MPL with a RF bandwidth of 12 GHz (3 dB-suppression band 6 to 18 GHz) has been demonstrated comprising the proposed PIC, where the achieved spurious-free dynamic range performance is comparable to that of Class-AB MPLs using low-biased Mach-Zehnder modulators.

NLC Hybrid Solid State Induction Modulator

CERN Document Server

Cassel, R L; Pappas, G C; Delamare, J E

2004-01-01

The Next Linear Collider accelerator proposal at SLAC requires a high efficiency, highly reliable, and low cost pulsed power modulator to drive the X-band klystrons. The original NLC envisions a solid state induction modulator design to drive up to 8 klystrons to 500 kV for 3 μs at 120 PPS with one modulator delivering greater than 1,000 MW pulse, at 500 kW average. A change in RF compression techniques resulted in only two klystrons needed pulsing per modulator at a reduced pulse width of 1.6 μsec or approximately 250 MW of the pulsed power and 80 kW of average powers. A prototype Design for Manufacturability (DFM) 8-pack modulator was under construction at the time of the change, so a redirection of modulator design was in order. To utilities the equipment which had already be fabricated, a hybrid modulator was designed and constructed using the DFM induction modulator parts and a conventional pulse transformer. The construction and performance of this hybrid two klystron Induction modul...

47 CFR 74.663 - Modulation limits.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Modulation limits. 74.663 Section 74.663 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) BROADCAST RADIO SERVICES EXPERIMENTAL RADIO... Stations § 74.663 Modulation limits. If amplitude modulation is employed, negative modulation peaks shall...

Note: Demodulation of spectral signal modulated by optical chopper with unstable modulation frequency.

Science.gov (United States)

Zhang, Shengzhao; Li, Gang; Wang, Jiexi; Wang, Donggen; Han, Ying; Cao, Hui; Lin, Ling; Diao, Chunhong

2017-10-01

When an optical chopper is used to modulate the light source, the rotating speed of the wheel may vary with time and subsequently cause jitter of the modulation frequency. The amplitude calculated from the modulated signal would be distorted when the frequency fluctuations occur. To precisely calculate the amplitude of the modulated light flux, we proposed a method to estimate the range of the frequency fluctuation in the measurement of the spectrum and then extract the amplitude based on the sum of power of the signal in the selected frequency range. Experiments were designed to test the feasibility of the proposed method and the results showed lower root means square error than the conventional way.

Feasibility of photovoltaic: thermoelectric hybrid modules

NARCIS (Netherlands)

van Sark, W.G.J.H.M.|info:eu-repo/dai/nl/074628526

2011-01-01

Outdoor performance of photovoltaic (PV) modules suffers from elevated temperatures. Conversion efficiency losses of up to about 25% can result, depending on the type of integration of the modules in the roof. Cooling of modules would therefore enhance annual PV performance. Instead of module

Development of an electro-optic super modulator

International Nuclear Information System (INIS)

Cusack, B; Shaddock, D.

2002-01-01

Full text: Optical phase modulators and amplitude modulators are commonplace in modern laser laboratories. In this talk, we present the development of a device that produces both amplitude modulation (AM) and phase modulation (PM), with a selectable phase relation between the two, on a single free-space Gaussian beam. We term this device a 'super modulator. The device is a version of the Mach-Zehnder modulator, where a beam is split, then separately phase modulated and recombined. Previous work has concentrated on one specific operating point, where the relative modulation phases and the interferometer phase are set to generate single sideband modulation, equivalent to an equal amount of AM and PM in quadrature. Here we are interested in the entire parameter space of amplitude modulation strength, phase modulation strength, and the phase relation between the two. The need for such a super modulator has arisen in the context of control systems for gravitational wave detection interferometers. Typical locking systems are based on the Pound-Drever-Hall method of locking which uses phase modulation. In principle, a super modulator could be used in a PDH configuration, when the locking point of the device will be tunable according to the quantity of AM injected (along with the obligatory PM) into the device

Experimental investigation of PV modules recycling; PV module recycle no jikkenteki kento

Energy Technology Data Exchange (ETDEWEB)

Unagida, H; Kurokawa, K [Tokyo University of Agriculture and Technology, Tokyo (Japan); Sakuta, K; Otani, K; Murata, K [Electrotechnical Laboratory, Tsukuba (Japan)

1997-11-25

Recycling, cost/energy analysis and recovery experiment were made on crystalline silicon PV modules with EVA(ethylene vinyl acetate)-laminated structure. The life of modules is dependent not on performance deterioration of PV cells themselves but on yellowing or poor transmittance of EVA caused by ultraviolet ray, and disconnection between cells by thermal stress. Recovery is carried out in 3 stages of cell, wafer and material. Recovery in the stages of cell and wafer results in considerable reduction of energy and cost. The recovery experiment was carried out using PV module samples prepared by cutting the modules into 25times15mm pieces after removing Al frames from the used modules, peeling back sheets and cutting off EVA. Since a nitric acid process at 70-80degC can dissolve EVA effectively, it is promising for reuse of surface glass and PV cells as they are. This process is also carried out under a condition around room temperature and pressure, contributing to cost reduction and energy saving for recycling. Generation of harmful NOx is only a problem to be solved. 2 refs., 6 figs., 1 tab.

Thermal management, systems and modules; Thermomanagement, Systeme und Module

Energy Technology Data Exchange (ETDEWEB)

Flik, M. [Behr GmbH und Co., Stuttgart (Germany)

1999-11-01

Up till now the individual systems for engine temperature control and air conditioning of the vehicle cabin have to a large extent been viewed independently of one another. With the progress of electronic control systems, however, Behr has adopted an integrative approach to managing all heat and substance flows outside of the engine. This perspective, which is known as thermal management, has significantly boosted the rate of innovation. In a short period of time, new and optimized modules and systems have allowed considerable improvements to be made in relation to passenger comfort and safety, the integration of subsystems and modules into the vehicle and environmental compatibility. This innovation drive, which also extends to the design of major modules, will continue to gain impetus in the future. (orig.) [German] Bisher wurden die verschiedenen Systeme zur Temperierung des Motors und zur Klimatisierung der Fahrzeugkabine weitgehend unabhaengig voneinander betrachtet. Mit dem Vordringen der elektronischen Regelung hat bei Behr jedoch eine gesamtheitliche Betrachtung aller Waerme- und Stoffstroeme ausserhalb des Motors eingesetzt. Diese Sichtweise, Thermomanagement genannt, hat eine erhebliche Innovationsdynamik ermoeglicht. Mit neuen und optimierten Modulen und Systemen konnten in kurzer Zeit betraechtliche Verbesserungen erzielt werden - bei Komfort und Sicherheit der Fahrzeuginsassen, bei der Integration der Subsysteme und Module ins Fahrzeug sowie bei seiner oekologischen Vertraeglichkeit. Diese Innovationsdynamik, die auch die Bildung von Grossmodulen einschliesst, wird in Zukunft noch zunehmen. (orig.)

The Strip Module

DEFF Research Database (Denmark)

Pedersen, Tommy

1996-01-01

When the behaviour of a ship in waves is to be predicted it is convenient to have a tool which includes different approaches to the problem.The aim of this project is to develop such a tool named the strip theory module. The strip theory module will consist of submodules dependent on the I...

Random and systematic beam modulator errors in dynamic intensity modulated radiotherapy

International Nuclear Information System (INIS)

Parsai, Homayon; Cho, Paul S; Phillips, Mark H; Giansiracusa, Robert S; Axen, David

2003-01-01

This paper reports on the dosimetric effects of random and systematic modulator errors in delivery of dynamic intensity modulated beams. A sliding-widow type delivery that utilizes a combination of multileaf collimators (MLCs) and backup diaphragms was examined. Gaussian functions with standard deviations ranging from 0.5 to 1.5 mm were used to simulate random positioning errors. A clinical example involving a clival meningioma was chosen with optic chiasm and brain stem as limiting critical structures in the vicinity of the tumour. Dose calculations for different modulator fluctuations were performed, and a quantitative analysis was carried out based on cumulative and differential dose volume histograms for the gross target volume and surrounding critical structures. The study indicated that random modulator errors have a strong tendency to reduce minimum target dose and homogeneity. Furthermore, it was shown that random perturbation of both MLCs and backup diaphragms in the order of σ = 1 mm can lead to 5% errors in prescribed dose. In comparison, when MLCs or backup diaphragms alone was perturbed, the system was more robust and modulator errors of at least σ = 1.5 mm were required to cause dose discrepancies greater than 5%. For systematic perturbation, even errors in the order of ±0.5 mm were shown to result in significant dosimetric deviations

Comparison of Simple Self-Oscillating PWM Modulators

DEFF Research Database (Denmark)

Dahl, Nicolai J.; Iversen, Niels Elkjær; Knott, Arnold

2016-01-01

Switch-mode power amplifiers has become the conventional choice for audio applications due to their superior efficiency and excellent audio performance. These amplifiers rely on high frequency modulation of the audio input. Conventional modulators use a fixed high frequency for modulation. Self......-oscillating modulators do not have a fixed modulation frequency and can provide good audio performance with very simple circuitry. This paper proposes a new type of self-oscillating modulator. The proposed modulator is compared to an already existing modulator of similar type and their performances are compared both...... theoretically and experimentally. The result shows that the proposed modulator provides a higher degree of linearity resulting in around 2% lower Total Harmonic Distortion (THD)....

Energy spectrum of galactic cosmic ray modulation and dependence of modulation parameters on distance

International Nuclear Information System (INIS)

Erkhov, V.I.; Kolomeets, E.V.; Likhoded, V.A.; Sevast'yanov, V.N.; Stekol'nikov, N.V.

1981-01-01

The paper presents the results of numerical calculation of galactic cosmic ray modulation by solar wind. Calculations were carried out on the basis of diffusion model taking into account convection and adiabatic loss of particles in interplanetary space. Both isotropic and anisotropic models were used in calculations. Modulation coefficient was calculated using the data on intensity of neutron component of cosmic rays and primary cosmic rays in the stratosphere for the period 1958-1979. The form of modulation function was determined. Obtained results allow to determine the size of modulation region and dependence of solar wind speed and diffusion coefficient on distance

Finite Element calculations of heat transfer for Forward SCT ModulesPart I - the Outer Module

CERN Document Server

Blocki, J; Perrin, E

2000-01-01

A status report on the thermal performance of the baseline SCT forward modules is presented. Possible design changes of the outer module which lead to significant improvements of the thermal characteristics of the module are indicated, in the context of a 2-point cooling scheme.

Spectro-temporal modulation masking patterns reveal frequency selectivity.

Science.gov (United States)

Oetjen, Arne; Verhey, Jesko L

2015-02-01

The present study investigated the possibility that the human auditory system demonstrates frequency selectivity to spectro-temporal amplitude modulations. Threshold modulation depth for detecting sinusoidal spectro-temporal modulations was measured using a generalized masked threshold pattern paradigm with narrowband masker modulations. Four target spectro-temporal modulations were examined, differing in their temporal and spectral modulation frequencies: a temporal modulation of -8, 8, or 16 Hz combined with a spectral modulation of 1 cycle/octave and a temporal modulation of 4 Hz combined with a spectral modulation of 0.5 cycles/octave. The temporal center frequencies of the masker modulation ranged from 0.25 to 4 times the target temporal modulation. The spectral masker-modulation center-frequencies were 0, 0.5, 1, 1.5, and 2 times the target spectral modulation. For all target modulations, the pattern of average thresholds for the eight normal-hearing listeners was consistent with the hypothesis of a spectro-temporal modulation filter. Such a pattern of modulation-frequency sensitivity was predicted on the basis of psychoacoustical data for purely temporal amplitude modulations and purely spectral amplitude modulations. An analysis of separability indicates that, for the present data set, selectivity in the spectro-temporal modulation domain can be described by a combination of a purely spectral and a purely temporal modulation filter function.

Perancangan Modul Penggajian Berbasis Odoo

OpenAIRE

Koeswanto, Vincent K. Edison; Yulia, Yulia; Adipranata, Rudy

2016-01-01

Human Resource Module is one of the modules owned by Odoo. One of the feature of this module is payroll. However, the features is not in accordance with the needs of companies in Indonesia in general. This causes the payroll system in Odoo not suitable to be implemented directly in the company.To solve these problems, author develop the payroll system in Human Resource module in Odoo. The development of this system is preceded by designing and analyze the payroll system at PT X. It also condu...

Acceleration recorder and playback module

Science.gov (United States)

Bozeman, Richard J., Jr.

1994-11-01

The present invention is directed to methods and apparatus relating to an accelerometer electrical signal recorder and playback module. The recorder module may be manufactured in lightweight configuration and includes analog memory components to store data. Signal conditioning circuitry is incorporated into the module so that signals may be connected directly from the accelerometer to the recorder module. A battery pack may be included for powering both the module and the accelerometer. Timing circuitry is included to control the time duration within which data is recorded or played back so as to avoid overloading the analog memory components. Multiple accelerometer signal recordings may be taken simultaneously without analog to digital circuits, multiplexing circuitry or software to compensate for the effects of multiplexing the signals.

Exploration Augmentation Module Project

Data.gov (United States)

National Aeronautics and Space Administration — The Exploration Augmentation Module (EAM) project goal is to design and deliver a flight module that is to be deployed to Earth-Lunar Distant Retrograde Orbit (DRO)....

CDC 7600 module slice

CERN Multimedia

Each module contained 8 circuit cards for a total of about 300-500 uncovered transistors packaged with face plates so the Freon plates wouldn't touch the circuits. (cooling plates that surrounded each module).

Health Occupations Module. The Integumentary System.

Science.gov (United States)

Temple Univ., Philadelphia, PA. Div. of Vocational Education.

This module on the integumentary system is one of eight modules designed for individualized instruction in health occupations education programs at both the secondary and postsecondary levels. This module contains an introduction to the module topic, objectives (e.g., list and describe the types of glands formed in the skin, and explain the…

Oil Politics and National Security in Nigeria

Science.gov (United States)

2010-12-01

Oil Transparency in the Niger Delta: Improving Public Sector Oil Derived Resource Flows and Utilization in Abia State, Nigeria,” Economies of...against the nine states officially recognized i.e. they exclude Ondo, Abia , and Imo states from being part of the Delta region (figure 1). 125 BBC...Peterside Sofiri Dr, “Oil Transparency in the Niger Delta: Improving Public Sector Oil Derived Resource Flows and Utilization in Abia State, Nigeria

Low modulation bias InGaN-based integrated EA-modulator-laser on semipolar GaN substrate

KAUST Repository

Shen, Chao

2015-10-06

In summary, we demonstrated the monolithic integration of electroabsorption modulator with laser diode and measured DC and AC modulation characteristics of the device, which is grown on (2021̅) plane GaN substrate. By alternating the modulation voltage at −3.5 V and 0 V, we achieve the laser output power of < 1.5 mW to > 9 mW, respectively, leading to ∼8.1 dB On/Off ratio. Our results clearly show that a low power consumption modulator can be achieved with semipolar EA-modulator compared to that of the c-plane devices.

Low modulation bias InGaN-based integrated EA-modulator-laser on semipolar GaN substrate

KAUST Repository

Shen, Chao; Leonard, John; Pourhashemi, Arash; Oubei, Hassan M.; Alias, Mohd Sharizal; Ng, Tien Khee; Nakamura, Shuji; DenBaars, Steven P.; Speck, James S.; Alyamani, Ahmed Y.; Eldesouki, Munir M.; Ooi, Boon S.

2015-01-01

In summary, we demonstrated the monolithic integration of electroabsorption modulator with laser diode and measured DC and AC modulation characteristics of the device, which is grown on (2021̅) plane GaN substrate. By alternating the modulation voltage at −3.5 V and 0 V, we achieve the laser output power of < 1.5 mW to > 9 mW, respectively, leading to ∼8.1 dB On/Off ratio. Our results clearly show that a low power consumption modulator can be achieved with semipolar EA-modulator compared to that of the c-plane devices.

Optical modulation techniques for analog signal processing and CMOS compatible electro-optic modulation

Science.gov (United States)

Gill, Douglas M.; Rasras, Mahmoud; Tu, Kun-Yii; Chen, Young-Kai; White, Alice E.; Patel, Sanjay S.; Carothers, Daniel; Pomerene, Andrew; Kamocsai, Robert; Beattie, James; Kopa, Anthony; Apsel, Alyssa; Beals, Mark; Mitchel, Jurgen; Liu, Jifeng; Kimerling, Lionel C.

2008-02-01

Integrating electronic and photonic functions onto a single silicon-based chip using techniques compatible with mass-production CMOS electronics will enable new design paradigms for existing system architectures and open new opportunities for electro-optic applications with the potential to dramatically change the management, cost, footprint, weight, and power consumption of today's communication systems. While broadband analog system applications represent a smaller volume market than that for digital data transmission, there are significant deployments of analog electro-optic systems for commercial and military applications. Broadband linear modulation is a critical building block in optical analog signal processing and also could have significant applications in digital communication systems. Recently, broadband electro-optic modulators on a silicon platform have been demonstrated based on the plasma dispersion effect. The use of the plasma dispersion effect within a CMOS compatible waveguide creates new challenges and opportunities for analog signal processing since the index and propagation loss change within the waveguide during modulation. We will review the current status of silicon-based electrooptic modulators and also linearization techniques for optical modulation.

Modulational instability of the obliquely modulated ion acoustic waves in a warm ion plasma

International Nuclear Information System (INIS)

Saxena, M.K.; Arora, A.K.; Sharma, S.R.

1981-01-01

Using KBM. perturbation technique, it is shown that the modulationally unstable domain in the (kappa - phi) plane for the obliquely modulated ion acoustic waves is appreciably modified due to the finite ion temperature. It is also shown that in a collisionless plasma having small TAUsub(i)/TAUsub(e) ( 0 approximately 0.1) may exceed the Landau damping rate provided the modulation is sufficiently oblique. (author)

The ANTARES Optical Module

CERN Document Server

Amram, P; Anvar, S; Ardellier-Desages, F E; Aslanides, Elie; Aubert, Jean-Jacques; Azoulay, R; Bailey, D; Basa, S; Battaglieri, M; Bellotti, R; Benhammou, Ya; Bernard, F; Berthier, R; Bertin, V; Billault, M; Blaes, R; Bland, R W; Blondeau, F; De Botton, N R; Boulesteix, J; Brooks, B; Brunner, J; Cafagna, F; Calzas, A; Capone, A; Caponetto, L; Cârloganu, C; Carmona, E; Carr, J; Carton, P H; Cartwright, S L; Cassol, F; Cecchini, S; Ciacio, F; Circella, M; Compere, C; Cooper, S; Coyle, P; Croquette, J; Cuneo, S; Danilov, M; Van Dantzig, R; De Marzo, C; De Vita, R; Deck, P; Destelle, J J; Dispau, G; Drougou, J F; Druillole, F; Engelen, J; Feinstein, F; Festy, D; Fopma, J; Gallone, J M; Giacomelli, G; Goret, P; Gosset, L G; Gournay, J F; Heijboer, A; Hernández-Rey, J J; Herrouin, G; Hubbard, John R; Jacquet, M; De Jong, M; Karolak, M; Kooijman, P M; Kouchner, A; Kudryavtsev, V A; Lachartre, D; Lafoux, H; Lamare, P; Languillat, J C; Laubier, L; Laugier, J P; Le Guen, Y; Le Provost, H; Le Van-Suu, A; Lemoine, L; Lo Nigro, L; Lo Presti, D; Loucatos, Sotirios S; Louis, F; Lyashuk, V I; Magnier, P; Marcelin, M; Margiotta, A; Massol, A; Masullo, R; Mazéas, F; Mazeau, B; Mazure, A; McMillan, J E; Michel, J L; Migneco, E; Millot, C; Mols, P; Montanet, François; Montaruli, T; Morel, J P; Moscoso, L; Navas, S; Nezri, E; Nooren, G J L; Oberski, J; Olivetto, C; Oppelt-pohl, A; Palanque-Delabrouille, Nathalie; Payre, P; Perrin, P; Petruccetti, M; Petta, P; Piattelli, P; Poinsignon, J; Popa, V; Potheau, R; Queinec, Y; Racca, C; Raia, G; Randazzo, N; Rethore, F; Riccobene, G; Ricol, J S; Ripani, M; Roca-Blay, V; Rolin, J F; Rostovtsev, A A; Russo, G V; Sacquin, Yu; Salusti, E; Schuller, J P; Schuster, W; Soirat, J P; Suvorova, O; Spooner, N J C; Spurio, M; Stolarczyk, T; Stubert, D; Taiuti, M; Tao, Charling; Tayalati, Y; Thompson, L F; Tilav, S; Triay, R; Valente, V; Varlamov, I; Vaudaine, G; Vernin, P; De Witt-Huberts, P K A; De Wolf, E; Zakharov, V; Zavatarelli, S; De Dios-Zornoza-Gomez, Juan; Zúñiga, J

2002-01-01

The ANTARES collaboration is building a deep sea neutrino telescope in the Mediterranean Sea. This detector will cover a sensitive area of typically 0.1 km-squared and will be equipped with about 1000 optical modules. Each of these optical modules consists of a large area photomultiplier and its associated electronics housed in a pressure resistant glass sphere. The design of the ANTARES optical module, which is a key element of the detector, has been finalized following extensive R & D studies and is reviewed here in detail.

Automatic modulation recognition of communication signals

CERN Document Server

Azzouz, Elsayed Elsayed

1996-01-01

Automatic modulation recognition is a rapidly evolving area of signal analysis. In recent years, interest from the academic and military research institutes has focused around the research and development of modulation recognition algorithms. Any communication intelligence (COMINT) system comprises three main blocks: receiver front-end, modulation recogniser and output stage. Considerable work has been done in the area of receiver front-ends. The work at the output stage is concerned with information extraction, recording and exploitation and begins with signal demodulation, that requires accurate knowledge about the signal modulation type. There are, however, two main reasons for knowing the current modulation type of a signal; to preserve the signal information content and to decide upon the suitable counter action, such as jamming. Automatic Modulation Recognition of Communications Signals describes in depth this modulation recognition process. Drawing on several years of research, the authors provide a cr...

Magneto-optic and electro-optic modulators

International Nuclear Information System (INIS)

Hutchinson, D.P.; Ma, C.H.; Price, T.R.; Staats, P.A.; Sluis, K.L.V.

1982-01-01

An important aspect of the Faraday rotation diagnostic for tokamak plasma measurement has been the development of suitable polarization modulators for submillimeter wavelength. The problems are to obtain high optical transmission and fast modulation frequencies. In ORNL, the authors have developed both a magneto-optic and an electro-optic submillimeter-wave modulators. These devices have been operated at modulation frequency of approximately 100 kHz, and both have high transmission. The original magneto-optic modulator consists of a 3 mm thick by 1.4 cm diameter 2-111 ferrite disk mounted at the center of an air core coil. Recently, a new ferrite modulator has been tested, which allows a much higher modulation frequency than the original device. A laboratory set-up designed to simulate a plasma heterodyne interferometer/polarimeter experiment has been used to determine the modulator characteristics. A mechanical polarization rotor was used to simulate the rotation by plasma. The transmission of the ferrite disk was 80 % at a wavelength of 0.447 mm. The authors have also performed preliminary measurement on an electro-optic modulator first demonstrated by Fetterman at Lincoln Laboratory, U.S. This device is a classical electro-optic modulator using a cryogenically cooled (4.2 K) LiTaO 3 crystal. Experiments are underway to determine the electro-optic properties of the crystal over the temperature range from 4.2 K to 77 K and over the range of wavelength from 0.118 mm to 0.447 mm. (Wakatsuki, Y.)

The ANTARES optical module

Energy Technology Data Exchange (ETDEWEB)

Amram, P.; Anghinolfi, M.; Anvar, S.; Ardellier-Desages, F.E.; Aslanides, E.; Aubert, J.-J.; Azoulay, R.; Bailey, D.; Basa, S.; Battaglieri, M.; Bellotti, R.; Benhammou, Y.; Bernard, F.; Berthier, R.; Bertin, V.; Billault, M.; Blaes, R.; Bland, R.W.; Blondeau, F.; Botton, N. de; Boulesteix, J.; Brooks, C.B.; Brunner, J.; Cafagna, F.; Calzas, A.; Capone, A.; Caponetto, L.; Carloganu, C.; Carmona, E.; Carr, J.; Carton, P.-H.; Cartwright, S.L.; Cassol, F.; Cecchini, S.; Ciacio, F.; Circella, M.; Compere, C.; Cooper, S.; Coyle, P.; Croquette, J.; Cuneo, S.; Danilov, M.; Dantzig, R. van; De Marzo, C.; DeVita, R.; Deck, P.; Destelle, J.-J.; Dispau, G.; Drougou, J.F.; Druillole, F.; Engelen, J.; Feinstein, F.; Festy, D.; Fopma, J.; Gallone, J.-M.; Giacomelli, G.; Goret, P.; Gosset, L.; Gournay, J.-F.; Heijboer, A.; Hernandez-Rey, J.J.; Herrouin, G.; Hubbard, J.R.; Jaquet, M.; Jong, M. de; Karolak, M.; Kooijman, P.; Kouchner, A.; Kudryavtsev, V.A.; Lachartre, D.; Lafoux, H. E-mail: lafoux@cea.fr; Lamare, P.; Languillat, J.-C.; Laubier, L.; Laugier, J.-P.; Le Guen, Y.; Le Provost, H.; Le Van Suu, A.; Lemoine, L.; Lo Nigro, L.; Lo Presti, D.; Loucatos, S.; Louis, F.; Lyashuk, V.; Magnier, P.; Marcelin, M.; Margiotta, A.; Massol, A.; Masullo, R.; Mazeas, F.; Mazeau, B.; Mazure, A.; McMillan, J.E.; Michel, J.L.; Migneco, E.; Millot, C.; Mols, P.; Montanet, F.; Montaruli, T.; Morel, J.P.; Moscoso, L.; Musumeci, M.; Navas, S.; Nezri, E.; Nooren, G.J.; Oberski, J.; Olivetto, C.; Oppelt-Pohl, A.; Palanque-Delabrouille, N.; Papaleo, R.; Payre, P.; Perrin, P.; Petruccetti, M.; Petta, C.; Piattelli, P.; Poinsignon, J.; Potheau, R.; Queinec, Y.; Racca, C.; Raia, G.; Randazzo, N.; Rethore, F.; Riccobene, G.; Ricol, J.-S.; Ripani, M.; Roca-Blay, V.; Rolin, J.F.; Rostovstev, A.; Russo, G.V.; Sacquin, Y.; Salusti, E.; Schuller, J.-P.; Schuster, W.; Soirat, J.-P.; Souvorova, O.; Spooner, N.J.C.; Spurio, M.; Stolarczyk, T.; Stubert, D.; Taiuti, M.; Tao, C.; Tayalati, Y.; Thompson, L.F.

2002-05-21

The ANTARES collaboration is building a deep sea neutrino telescope in the Mediterranean Sea. This detector will cover a sensitive area of typically 0.1 km{sup 2} and will be equipped with about 1000 optical modules. Each of these optical modules consists of a large area photomultiplier and its associated electronics housed in a pressure resistant glass sphere. The design of the ANTARES optical module, which is a key element of the detector, has been finalized following extensive R and D studies and is reviewed here in detail.

The ANTARES optical module

International Nuclear Information System (INIS)

Amram, P.; Anghinolfi, M.; Anvar, S.; Ardellier-Desages, F.E.; Aslanides, E.; Aubert, J.-J.; Azoulay, R.; Bailey, D.; Basa, S.; Battaglieri, M.; Bellotti, R.; Benhammou, Y.; Bernard, F.; Berthier, R.; Bertin, V.; Billault, M.; Blaes, R.; Bland, R.W.; Blondeau, F.; Botton, N. de; Boulesteix, J.; Brooks, C.B.; Brunner, J.; Cafagna, F.; Calzas, A.; Capone, A.; Caponetto, L.; Carloganu, C.; Carmona, E.; Carr, J.; Carton, P.-H.; Cartwright, S.L.; Cassol, F.; Cecchini, S.; Ciacio, F.; Circella, M.; Compere, C.; Cooper, S.; Coyle, P.; Croquette, J.; Cuneo, S.; Danilov, M.; Dantzig, R. van; De Marzo, C.; DeVita, R.; Deck, P.; Destelle, J.-J.; Dispau, G.; Drougou, J.F.; Druillole, F.; Engelen, J.; Feinstein, F.; Festy, D.; Fopma, J.; Gallone, J.-M.; Giacomelli, G.; Goret, P.; Gosset, L.; Gournay, J.-F.; Heijboer, A.; Hernandez-Rey, J.J.; Herrouin, G.; Hubbard, J.R.; Jaquet, M.; Jong, M. de; Karolak, M.; Kooijman, P.; Kouchner, A.; Kudryavtsev, V.A.; Lachartre, D.; Lafoux, H.; Lamare, P.; Languillat, J.-C.; Laubier, L.; Laugier, J.-P.; Le Guen, Y.; Le Provost, H.; Le Van Suu, A.; Lemoine, L.; Lo Nigro, L.; Lo Presti, D.; Loucatos, S.; Louis, F.; Lyashuk, V.; Magnier, P.; Marcelin, M.; Margiotta, A.; Massol, A.; Masullo, R.; Mazeas, F.; Mazeau, B.; Mazure, A.; McMillan, J.E.; Michel, J.L.; Migneco, E.; Millot, C.; Mols, P.; Montanet, F.; Montaruli, T.; Morel, J.P.; Moscoso, L.; Musumeci, M.; Navas, S.; Nezri, E.; Nooren, G.J.; Oberski, J.; Olivetto, C.; Oppelt-Pohl, A.; Palanque-Delabrouille, N.; Papaleo, R.; Payre, P.; Perrin, P.; Petruccetti, M.; Petta, C.; Piattelli, P.; Poinsignon, J.; Potheau, R.; Queinec, Y.; Racca, C.; Raia, G.; Randazzo, N.; Rethore, F.; Riccobene, G.; Ricol, J.-S.; Ripani, M.; Roca-Blay, V.; Rolin, J.F.; Rostovstev, A.; Russo, G.V.; Sacquin, Y.; Salusti, E.; Schuller, J.-P.; Schuster, W.; Soirat, J.-P.; Souvorova, O.; Spooner, N.J.C.; Spurio, M.; Stolarczyk, T.; Stubert, D.; Taiuti, M.; Tao, C.; Tayalati, Y.; Thompson, L.F.; Tilav, S.; Triay, R.; Valente, V.; Varlamov, I.; Vaudaine, G.; Vernin, P.; Witt Huberts, P. de; Wolf, E. de; Zakharov, V.; Zavatarelli, S.; D Zornoza, J. de; Zuniga, J.

2002-01-01

The ANTARES collaboration is building a deep sea neutrino telescope in the Mediterranean Sea. This detector will cover a sensitive area of typically 0.1 km 2 and will be equipped with about 1000 optical modules. Each of these optical modules consists of a large area photomultiplier and its associated electronics housed in a pressure resistant glass sphere. The design of the ANTARES optical module, which is a key element of the detector, has been finalized following extensive R and D studies and is reviewed here in detail

IN OLUWA FOREST RESERVE, ONDO STATE, NIGERIA ...

African Journals Online (AJOL)

Osondu

2013-02-22

Feb 22, 2013 ... (ANOVA), correlation and regression methods. (Ezekiel and Fox, 1961; ..... Standard error of the estimate = 0.01768. References. Adekunle, J. and .... Dancik, B.P, Micko, M.M.. (1984), Variation and heritability of wood density.

Can we trust module-respect heuristics?

International Nuclear Information System (INIS)

Mo, Yuchang

2013-01-01

BDD (Binary Decision Diagrams) have proven to be a very efficient tool to assess Fault Trees. However, the size of BDD, and therefore the efficiency of the whole methodology, depends dramatically on the choice of variable ordering. The determination of the best variable ordering is intractable. Therefore, heuristics have been designed to select reasonably good variable orderings. One very important common feature for good static heuristics is to respect modules. In this paper, the notion of module-respect is studied in a systematic way. It is proved that under certain condition there always exists an optimal ordering that respects modules. This condition is that for each module there is always a smallest module BDD and each included module variable appears only once. On the other hand, it is shown that for the trees not satisfying the above sufficient condition the optimal orderings may not be able to be directly generated using module-respect heuristics, even when the shuffling strategy is used.

Interactions between amplitude modulation and frequency modulation processing: Effects of age and hearing loss.

Science.gov (United States)

Paraouty, Nihaad; Ewert, Stephan D; Wallaert, Nicolas; Lorenzi, Christian

2016-07-01

Frequency modulation (FM) and amplitude modulation (AM) detection thresholds were measured for a 500-Hz carrier frequency and a 5-Hz modulation rate. For AM detection, FM at the same rate as the AM was superimposed with varying FM depth. For FM detection, AM at the same rate was superimposed with varying AM depth. The target stimuli always contained both amplitude and frequency modulations, while the standard stimuli only contained the interfering modulation. Young and older normal-hearing listeners, as well as older listeners with mild-to-moderate sensorineural hearing loss were tested. For all groups, AM and FM detection thresholds were degraded in the presence of the interfering modulation. AM detection with and without interfering FM was hardly affected by either age or hearing loss. While aging had an overall detrimental effect on FM detection with and without interfering AM, there was a trend that hearing loss further impaired FM detection in the presence of AM. Several models using optimal combination of temporal-envelope cues at the outputs of off-frequency filters were tested. The interfering effects could only be predicted for hearing-impaired listeners. This indirectly supports the idea that, in addition to envelope cues resulting from FM-to-AM conversion, normal-hearing listeners use temporal fine-structure cues for FM detection.

A series connection architecture for large-area organic photovoltaic modules with a 7.5% module efficiency.

Science.gov (United States)

Hong, Soonil; Kang, Hongkyu; Kim, Geunjin; Lee, Seongyu; Kim, Seok; Lee, Jong-Hoon; Lee, Jinho; Yi, Minjin; Kim, Junghwan; Back, Hyungcheol; Kim, Jae-Ryoung; Lee, Kwanghee

2016-01-05

The fabrication of organic photovoltaic modules via printing techniques has been the greatest challenge for their commercial manufacture. Current module architecture, which is based on a monolithic geometry consisting of serially interconnecting stripe-patterned subcells with finite widths, requires highly sophisticated patterning processes that significantly increase the complexity of printing production lines and cause serious reductions in module efficiency due to so-called aperture loss in series connection regions. Herein we demonstrate an innovative module structure that can simultaneously reduce both patterning processes and aperture loss. By using a charge recombination feature that occurs at contacts between electron- and hole-transport layers, we devise a series connection method that facilitates module fabrication without patterning the charge transport layers. With the successive deposition of component layers using slot-die and doctor-blade printing techniques, we achieve a high module efficiency reaching 7.5% with area of 4.15 cm(2).

Affirmative Action. Module Number 16. Work Experience Program Modules. Coordination Techniques Series.

Science.gov (United States)

Shawhan, Carl; Morley, Ray

This self-instructional module, the last in a series of 16 on techniques for coordinating work experience programs, deals with affirmative action. Addressed in the module are the following topics: the nature of affirmative action legislation and regulations, the role of the teacher-coordinator as a resource person for affirmative action…

Pattern of Ocular Injuries in Owo, Nigeria

Directory of Open Access Journals (Sweden)

Charles Oluwole Omolase

2011-01-01

Full Text Available Purpose: To determine the pattern of ocular injuries in patients presenting to the eye clinic and the accident and emergency department of Federal Medical Center, Owo, Ondo State, Nigeria. Methods: This prospective study was conducted between January and December 2009. Federal Medical Center, Owo is the only tertiary hospital in Ondo State, Nigeria. The eye center located at this medical center was the only eye care facility in the community at the time of this study. All patients were interviewed with the aid of an interviewer-administered questionnaire and underwent a detailed ocular examination. Results: Of 132 patients included in the study, most (84.1% sustained blunt eye injury while (12.1% had penetrating eye injury. A considerable proportion of patients (37.9% presented within 24 hours of injury. Vegetative materials were the most common (42.4% offending agent, a minority of patients (22% was admitted and none of the patients had used eye protection at the time of injury. Conclusion: In the current series, blunt eye injury was the most common type of ocular trauma. The community should be educated and informed about the importance of preventive measures including protective eye devices during high risk activities. Patients should be encouraged to present early following ocular injury.

Experimental Investigations of 3-D-/4-D-CAP Modulation With Directly Modulated VCSELs

DEFF Research Database (Denmark)

Binti Othman, Maisara; Zhang, Xu; Deng, Lei

2012-01-01

correction limit of 2.8 × 10-3 for error-free reception is achieved after 20 km of SSMF transmission. Spectral efficiencies of 2.68 and 2.08 b/s/Hz are reported for 3-D-CAP and 4-D-CAP, respectively. We believe that multidimensional modulation formats represent an attractive solution for providing more......In this letter, we present experimental investigations of multidimensional multilevel carrierless amplitude phase (CAP) modulation with directly modulated vertical cavity surface-emitting lasers. The signals are transmitted over 20 km of standard single-mode fiber (SSMF). For multilevel 3-D...

ATLAS SCT - Progress on the Silicon Modules

CERN Multimedia

Tyndel, M.

The ATLAS SCT consists of 4088 silicon modules. Each module is made up of 4 silicon sensors with 1536 readout strips. Individual strips are connected to FE amplifiers, discriminators and pipelines on the module, i.e. there are 12 radiation hard ASICs, each containing 128 channels on the module. The sensors and the ASICs were developed for the ATLAS experiment and production is proceeding smoothly with over half the components delivered. The components of a module - 4 silicon sensors, a Cu/polyimide hybrid and pitch adaptor, and 12 ASICs - need to be carefully and precisely assembled onto a carbon and ceramic framework, which supports the module and removes the heat. Eleven production clusters are preparing to carry this out over the next two years. An important milestone for the barrel modules has been passed with the first cluster (KEK) now in production (~40 modules produced). A second cluster UK-B has qualified by producing five modules within specification (see below) and is about to start production. T...

Induction accelerator test module for HIF

International Nuclear Information System (INIS)

Faltens, A.

1991-04-01

An induction linac test module suitable for investigating the drive requirements and the longitudinal coupling impedance of a high-power ion induction linac has been constructed by the Heavy Ion Fusion (HIF) group at LBL. The induction linac heavy ion driver for inertial confinement fusion (ICF) as presently envisioned uses multiple parallel beams which are transported in separate focusing channels but accelerated together in the induction modules. The resulting induction modules consequently have large beam apertures-1--2 meters in diameter- and correspondingly large outside diameters. The module geometry is related to a low-frequency ''gap capacity'' and high-frequency structural resonances, which are affected by the magnetic core loading and the module pulser impedance. A description of the test module and preliminary results are presented. 3 figs

ITER Central Solenoid Module Fabrication

Energy Technology Data Exchange (ETDEWEB)

Smith, John [General Atomics, San Diego, CA (United States)

2016-09-23

The fabrication of the modules for the ITER Central Solenoid (CS) has started in a dedicated production facility located in Poway, California, USA. The necessary tools have been designed, built, installed, and tested in the facility to enable the start of production. The current schedule has first module fabrication completed in 2017, followed by testing and subsequent shipment to ITER. The Central Solenoid is a key component of the ITER tokamak providing the inductive voltage to initiate and sustain the plasma current and to position and shape the plasma. The design of the CS has been a collaborative effort between the US ITER Project Office (US ITER), the international ITER Organization (IO) and General Atomics (GA). GA’s responsibility includes: completing the fabrication design, developing and qualifying the fabrication processes and tools, and then completing the fabrication of the seven 110 tonne CS modules. The modules will be shipped separately to the ITER site, and then stacked and aligned in the Assembly Hall prior to insertion in the core of the ITER tokamak. A dedicated facility in Poway, California, USA has been established by GA to complete the fabrication of the seven modules. Infrastructure improvements included thick reinforced concrete floors, a diesel generator for backup power, along with, cranes for moving the tooling within the facility. The fabrication process for a single module requires approximately 22 months followed by five months of testing, which includes preliminary electrical testing followed by high current (48.5 kA) tests at 4.7K. The production of the seven modules is completed in a parallel fashion through ten process stations. The process stations have been designed and built with most stations having completed testing and qualification for carrying out the required fabrication processes. The final qualification step for each process station is achieved by the successful production of a prototype coil. Fabrication of the first

Space-time-modulated stochastic processes

Science.gov (United States)

Giona, Massimiliano

2017-10-01

Starting from the physical problem associated with the Lorentzian transformation of a Poisson-Kac process in inertial frames, the concept of space-time-modulated stochastic processes is introduced for processes possessing finite propagation velocity. This class of stochastic processes provides a two-way coupling between the stochastic perturbation acting on a physical observable and the evolution of the physical observable itself, which in turn influences the statistical properties of the stochastic perturbation during its evolution. The definition of space-time-modulated processes requires the introduction of two functions: a nonlinear amplitude modulation, controlling the intensity of the stochastic perturbation, and a time-horizon function, which modulates its statistical properties, providing irreducible feedback between the stochastic perturbation and the physical observable influenced by it. The latter property is the peculiar fingerprint of this class of models that makes them suitable for extension to generic curved-space times. Considering Poisson-Kac processes as prototypical examples of stochastic processes possessing finite propagation velocity, the balance equations for the probability density functions associated with their space-time modulations are derived. Several examples highlighting the peculiarities of space-time-modulated processes are thoroughly analyzed.

Magneto-optic and electro-optic modulators

International Nuclear Information System (INIS)

Hutchinson, D.P.; Ma, C.H.; Price, T.R.; Staats, P.A.; Vander Sluis, K.L.

1982-01-01

An important aspect of the Faraday rotation diagnostic for tokamak plasma measurements has been the development of suitable polarization modulators for submillimeter wavelengths. The problems are to obtain high optical transmission and fast modulation frequencies. At ORNL we have developed both a magneto-optic and an electro-optic submillimeter-wave modulators. These devices have been operated at modulation frequencies of approximately 100 kHz and both have high transmission

Photovoltaic cell module and method of forming

Science.gov (United States)

Howell, Malinda; Juen, Donnie; Ketola, Barry; Tomalia, Mary Kay

2017-12-12

A photovoltaic cell module, a photovoltaic array including at least two modules, and a method of forming the module are provided. The module includes a first outermost layer and a photovoltaic cell disposed on the first outermost layer. The module also includes a second outermost layer disposed on the photovoltaic cell and sandwiching the photovoltaic cell between the second outermost layer and the first outermost layer. The method of forming the module includes the steps of disposing the photovoltaic cell on the first outermost layer, disposing a silicone composition on the photovoltaic cell, and compressing the first outermost layer, the photovoltaic cell, and the second layer to form the photovoltaic cell module.

Steps in Modular Specifications for Concurrent Modules

DEFF Research Database (Denmark)

Da Rocha Pinto, Pedro; Dinsdale-Young, Thomas; Gardner, Philippa

2015-01-01

The specification of a concurrent program module is a difficult problem. The specifications must be strong enough to enable reasoning about the intended clients without reference to the underlying module implementation. We survey a range of verification techniques for specifying concurrent module......, in particular highlighting four key concepts: auxiliary state, interference abstraction, resource ownership and atomicity. We show how these concepts combine to provide powerful approaches to specifying concurrent modules.......The specification of a concurrent program module is a difficult problem. The specifications must be strong enough to enable reasoning about the intended clients without reference to the underlying module implementation. We survey a range of verification techniques for specifying concurrent modules...

Quantum model for electro-optical amplitude modulation.

Science.gov (United States)

Capmany, José; Fernández-Pousa, Carlos R

2010-11-22

We present a quantum model for electro-optic amplitude modulation, which is built upon quantum models of the main photonic components that constitute the modulator, that is, the guided-wave beamsplitter and the electro-optic phase modulator and accounts for all the different available modulator structures. General models are developed both for single and dual drive configurations and specific results are obtained for the most common configurations currently employed. Finally, the operation with two-photon input for the control of phase-modulated photons and the important topic of multicarrier modulation are also addressed.

Temporal modulations in speech and music.

Science.gov (United States)

Ding, Nai; Patel, Aniruddh D; Chen, Lin; Butler, Henry; Luo, Cheng; Poeppel, David

2017-10-01

Speech and music have structured rhythms. Here we discuss a major acoustic correlate of spoken and musical rhythms, the slow (0.25-32Hz) temporal modulations in sound intensity and compare the modulation properties of speech and music. We analyze these modulations using over 25h of speech and over 39h of recordings of Western music. We show that the speech modulation spectrum is highly consistent across 9 languages (including languages with typologically different rhythmic characteristics). A different, but similarly consistent modulation spectrum is observed for music, including classical music played by single instruments of different types, symphonic, jazz, and rock. The temporal modulations of speech and music show broad but well-separated peaks around 5 and 2Hz, respectively. These acoustically dominant time scales may be intrinsic features of speech and music, a possibility which should be investigated using more culturally diverse samples in each domain. Distinct modulation timescales for speech and music could facilitate their perceptual analysis and its neural processing. Copyright © 2017 Elsevier Ltd. All rights reserved.

Single channel speech enhancement in the modulation domain: New insights in the modulation channel selection framework

DEFF Research Database (Denmark)

Boldt, Jesper B.; Bertelsen, Andreas Thelander; Gran, Fredrik

2015-01-01

Recently, the ideal binary mask has been introduced in the modulation domain by extending the ideal channel selection method to modulation channel selection [1]. This new method shows substantial improvement in speech intelligibility but less than its predecessor despite the higher complexity. Here......, we extend the previous finding from [1] and provide a more direct comparison of binary masking in the modulation domain with binary masking in the time-frequency domain. Subjective and objective evaluations are performed and provide additional insight into modulation domain processing....

Power module assembly

Science.gov (United States)

Campbell, Jeremy B [Torrance, CA; Newson, Steve [Redondo Beach, CA

2011-11-15

A power module assembly of the type suitable for deployment in a vehicular power inverter, wherein the power inverter has a grounded chassis, is provided. The power module assembly comprises a conductive base layer electrically coupled to the chassis, an insulating layer disposed on the conductive base layer, a first conductive node disposed on the insulating layer, a second conductive node disposed on the insulating layer, wherein the first and second conductive nodes are electrically isolated from each other. The power module assembly also comprises a first capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the first conductive node, and further comprises a second capacitor having a first electrode electrically connected to the conductive base layer, and a second electrode electrically connected to the second conductive node.

GREET Pretreatment Module

Energy Technology Data Exchange (ETDEWEB)

Adom, Felix K. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division; Dunn, Jennifer B. [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division; Han, Jeongwoo [Argonne National Lab. (ANL), Argonne, IL (United States). Energy Systems Division

2014-09-01

A wide range of biofuels and biochemicals can be produced from cellulosic biomass via different pretreatment technologies that yield sugars. Process simulations of dilute acid and ammonia fiber expansion pretreatment processes and subsequent hydrolysis were developed in Aspen Plus for four lignocellulosic feedstocks (corn stover, miscanthus, switchgrass, and poplar). This processing yields sugars that can be subsequently converted to biofuels or biochemical. Material and energy consumption data from Aspen Plus were then compiled in a new Greenhouses Gases, Regulated Emissions, and Energy Use in Transportation (GREET^TM) pretreatment module. The module estimates the cradle-to-gate fossil energy consumption (FEC) and greenhouse gas (GHG) emissions associated with producing fermentable sugars. This report documents the data and methodology used to develop this module and the cradle-to-gate FEC and GHG emissions that result from producing fermentable sugars.

Solid state detector module

International Nuclear Information System (INIS)

Hoffman, D. M.

1985-01-01

A solid state detector in which each scintillator is optimally configured and coupled with its associated sensing diode in a way which exploits light piping effects to enhance efficiency, and at the same time provide a detector which is modular in nature. To achieve light piping, the scintillator crystal is oriented such that its sides conform with the crystal cleavage plane, and the sides are highly polished. An array of tungsten collimator plates define the individual channels. Multi-channel scintillator/diode modules are mounted behind and in registry with the plurality of collimator plates. A plurality of scintillators are bonded together after coating the surfaces thereof to minimize optical crosstalk. After lapping the face of the scintillator module, it is then bonded to a diode module with individual scintillators in registration with individual diodes. The module is then positioned in the detector array with collimator plates at the junctions between the scintillators

Periodically modulated dark states

Science.gov (United States)

Han, Yingying; Zhang, Jun; Zhang, Wenxian

2018-04-01

Phenomena of electromagnetically induced transparency (PEIT) may be interpreted by the Autler-Townes Splitting (ATS), where the coupled states are split by the coupling laser field, or by the quantum destructive interference (QDI), where the atomic phases caused by the coupling laser and the probe laser field cancel. We propose modulated experiments to explore the PEIT in an alternative way by periodically modulating the coupling and the probe fields in a Λ-type three-level system initially in a dark state. Our analytical and numerical results rule out the ATS interpretation and show that the QDI interpretation is more appropriate for the modulated experiments. Interestingly, dark state persists in the double-modulation situation where control and probe fields never occur simultaneously, which is significant difference from the traditional dark state condition. The proposed experiments are readily implemented in atomic gases, artificial atoms in superconducting quantum devices, or three-level meta-atoms in meta-materials.

Evolutionary and developmental modules.

Science.gov (United States)

Lacquaniti, Francesco; Ivanenko, Yuri P; d'Avella, Andrea; Zelik, Karl E; Zago, Myrka

2013-01-01

The identification of biological modules at the systems level often follows top-down decomposition of a task goal, or bottom-up decomposition of multidimensional data arrays into basic elements or patterns representing shared features. These approaches traditionally have been applied to mature, fully developed systems. Here we review some results from two other perspectives on modularity, namely the developmental and evolutionary perspective. There is growing evidence that modular units of development were highly preserved and recombined during evolution. We first consider a few examples of modules well identifiable from morphology. Next we consider the more difficult issue of identifying functional developmental modules. We dwell especially on modular control of locomotion to argue that the building blocks used to construct different locomotor behaviors are similar across several animal species, presumably related to ancestral neural networks of command. A recurrent theme from comparative studies is that the developmental addition of new premotor modules underlies the postnatal acquisition and refinement of several different motor behaviors in vertebrates.

Research on a new magnetic-field-modulated brushless double-rotor machine with sinusoidal-permeance modulating ring

Directory of Open Access Journals (Sweden)

Ping Zheng

2017-05-01

Full Text Available The magnetic-field-modulated brushless double-rotor machine (MFM-BDRM, composed of a stator, a modulating ring rotor, and a PM rotor, is a kind of power-split device for hybrid electric vehicles (HEVs. In this paper, a new MFM-BDRM with sinusoidal-permeance modulating ring named Sinusoidal-Permeance-Modulating-Ring Brushless Double-Rotor Machine (SPMR-BDRM is proposed to solve the problem of poor mechanical strength and large iron loss. The structure and the operating principle of the MFM-BDRM are introduced. The design principle of the sinusoidal-permeance modulating ring is analyzed and derived. The main idea of that is to minimize the harmonic permeance of air gap, thereby the harmonic magnetic fields can be restrained. There are comparisons between a MFM-BDRM with sinusoidal-permeance modulating ring and a same size MFM-BDRM with traditional modulating ring, including magnetic field distributions and electromagnetic performances. Most importantly, the iron losses are compared under six different conditions. The result indicates that the harmonic magnetic fields in the air gap are restrained; the electromagnetic torque and power factor are almost the same with same armature current; the torque ripples of the modulating ring rotor and the PM rotor are reduced; the stator loss is reduced by 13% at least and the PM loss is reduced by 20% at least compared with the same size traditional MFM-BDRM under the same operating conditions.

PV module mounting method and mounting assembly

Science.gov (United States)

Lenox, Carl J.S.; Johnson, Kurt M.

2013-04-23

A method for mounting PV modules to a deck includes selecting PV module layout pattern so that adjacent PV module edges are spaced apart. PV mounting and support assemblies are secured to the deck according to the layout pattern using fasteners extending into the deck. The PV modules are placed on the PV mounting and support assemblies. Retaining elements are located over and secured against the upper peripheral edge surfaces of the PV modules so to secure them to the deck with the peripheral edges of the PV modules spaced apart from the deck. In some examples a PV module mounting assembly, for use on a shingled deck, comprises flashing, a base mountable on the flashing, a deck-penetrating fastener engageable with the base and securable to the deck so to secure the flashing and the base to the shingled deck, and PV module mounting hardware securable to the base.

Index modulation for 5G wireless communications

CERN Document Server

Wen, Miaowen; Yang, Liuqing

2017-01-01

This book presents a thorough examination of index modulation, an emerging 5G modulation technique. It includes representative transmitter and receiver design, optimization, and performance analysis of index modulation in various domains. First, the basic spatial modulation system for the spatial domain is introduced. Then, the development of a generalized pre-coding aided quadrature spatial modulation system as well as a virtual spatial modulation system are presented. For the space-time domain, a range of differential spatial modulation systems are examined, along with the pre-coding design. Both basic and enhanced index modulated OFDM systems for the frequency domain are discussed, focusing on the verification of their strong capabilities in inter-carrier interference mitigation. Finally, key open problems are highlighted and future research directions are considered. Designed for researchers and professionals, this book is essential for anyone working in communications networking, 5G, and system design. A...

THE INFLUENCE OF PARENTS’ EDUCATIONAL BACKGROUND AND STUDY FACILITIES ON ACADEMIC PERFORMANCE AMONG SECONDARY SCHOOL STUDENTS

OpenAIRE

ALOKAN, FUNMILOLA BOSEDE; OSAKINLE, EUNICE OLUFUNMILAYO; ONIJINGIN, EMMANUEL OLUBU

2013-01-01

There has been an outcry against the poor performance of students in the Senior Secondary Certificate Examination in Nigeria. This study investigated the difference between the academic performance of students from parents with high educational background and students from parents with low educational background. It also investigated the influence of having study facilities at home on academic performance. The population for this study comprised all public secondary school students in Ondo St...

Intensity-modulated three-dimensional conformal radiotherapy

International Nuclear Information System (INIS)

Mohan, Radhe

1996-01-01

Optimized intensity-modulated treatments one of the important advances in photon radiotherapy. Intensity modulation provides a greatly increased control over dose distributions. Such control can be maximally exploited to achieve significantly higher levels of conformation to the desired clinical objectives using sophisticated optimization techniques. Safe, rapid and efficient delivery of intensity-modulated treatments has become feasible using a dynamic multi-leaf collimator under computer control. The need for all other field shaping devices such as blocks, wedges and compensators is eliminated. Planning and delivery of intensity-modulated treatments is amenable to automation and development of class solutions for each treatment site and stage which can be implemented not only at major academic centers but on a wide scale. A typical treatment involving as many as 10 fields can be delivered in times shorter than much simpler conventional treatments. The main objective of the course is to give an overview of the current state of the art of planning and delivery methods of intensity-modulated treatments. Specifically, the following topics will be covered using representative optimized plans and treatments: 1. A typical procedure for planning and delivering an intensity-modulated treatment. 2. Quantitative definition of criteria (i.e., the objective function) of optimization of intensity-modulated treatments. Clinical relevance of objectives and the dependence of the quality of optimized intensity-modulated plans upon whether the objectives are stated purely in terms of simple dose or dose-volume criteria or whether they incorporate biological indices. 3. Importance of the lateral transport of radiation in the design of intensity-modulated treatments. Impact on dose homogeneity and the optimum choice of margins. 4. Use of intensity-modulated treatments in escalation of tumor dose for the same or lower normal tissue dose. Fractionation of intensity-modulated treatments

Intensity-modulated three-dimensional conformal radiotherapy

International Nuclear Information System (INIS)

Mohan, Radhe

1997-01-01

Optimized intensity-modulated treatments one of the important advances in photon radiotherapy. Intensity modulation provides a greatly increased control over dose distributions. Such control can be maximally exploited to achieve significantly higher levels of conformation to the desired clinical objectives using sophisticated optimization techniques. Safe, rapid and efficient delivery of intensity-modulated treatments has become feasible using a dynamic multi-leaf collimator under computer control. The need for all other field shaping devices such as blocks, wedges and compensators is eliminated. Planning and delivery of intensity-modulated treatments is amenable to automation and development of class solutions for each treatment site and stage which can be implemented not only at major academic centers but on a wide scale. A typical treatment involving as many as 10 fields can be delivered in times shorter than much simpler conventional treatments. The main objective of the course is to give an overview of the current state of the art of planning and delivery methods of intensity-modulated treatments. Specifically, the following topics will be covered using representative optimized plans and treatments: 1. A typical procedure for planning and delivering an intensity-modulated treatment. 2. Quantitative definition of criteria (i.e., the objective function) of optimization of intensity-modulated treatments. Clinical relevance of objectives and the dependence of the quality of optimized intensity-modulated plans upon whether the objectives are stated purely in terms of simple dose or dose-volume criteria or whether they incorporate biological indices. 3. Importance of the lateral transport of radiation in the design of intensity-modulated treatments. Impact on dose homogeneity and the optimum choice of margins. 4. Use of intensity-modulated treatments in escalation of tumor dose for the same or lower normal tissue dose. Fractionation of intensity-modulated treatments

Rate modulation detection thresholds for cochlear implant users.

Science.gov (United States)

Brochier, Tim; McKay, Colette; McDermott, Hugh

2018-02-01

The perception of temporal amplitude modulations is critical for speech understanding by cochlear implant (CI) users. The present study compared the ability of CI users to detect sinusoidal modulations of the electrical stimulation rate and current level, at different presentation levels (80% and 40% of the dynamic range) and modulation frequencies (10 and 100 Hz). Rate modulation detection thresholds (RMDTs) and amplitude modulation detection thresholds (AMDTs) were measured and compared to assess whether there was a perceptual advantage to either modulation method. Both RMDTs and AMDTs improved with increasing presentation level and decreasing modulation frequency. RMDTs and AMDTs were correlated, indicating that a common processing mechanism may underlie the perception of rate modulation and amplitude modulation, or that some subject-dependent factors affect both types of modulation detection.

On some properties of ⊕-supplemented modules

Directory of Open Access Journals (Sweden)

A. Idelhadj

2003-01-01

Full Text Available A module M is ⊕-supplemented if every submodule of M has a supplement which is a direct summand of M. In this paper, we show that a quotient of a ⊕-supplemented module is not in general ⊕-supplemented. We prove that over a commutative ring R, every finitely generated ⊕-supplemented R-module M having dual Goldie dimension less than or equal to three is a direct sum of local modules. It is also shown that a ring R is semisimple if and only if the class of ⊕-supplemented R-modules coincides with the class of injective R-modules. The structure of ⊕-supplemented modules over a commutative principal ideal ring is completely determined.

Adjustable extender for instrument module

International Nuclear Information System (INIS)

Sevec, J.B.; Stein, A.D.

1975-01-01

A blank extender module used to mount an instrument module in front of its console for repair or test purposes has been equipped with a rotatable mount and means for locking the mount at various angles of rotation for easy accessibility. The rotatable mount includes a horizontal conduit supported by bearings within the blank module. The conduit is spring-biased in a retracted position within the blank module and in this position a small gear mounted on the conduit periphery is locked by a fixed pawl. The conduit and instrument mount can be pulled into an extended position with the gear clearing the pawl to permit rotation and adjustment of the instrument

Modulational instability of coupled waves

International Nuclear Information System (INIS)

McKinstrie, C.J.; Bingham, R.

1989-01-01

The collinear propagation of an arbitrary number of finite-amplitude waves is modeled by a system of coupled nonlinear Schroedinger equations; one equation for each complex wave amplitude. In general, the waves are modulationally unstable with a maximal growth rate larger than the modulational growth rate of any wave alone. Moreover, waves that are modulationally stable by themselves can be driven unstable by the nonlinear coupling. The general theory is then applied to the relativistic modulational instability of two laser beams in a beat-wave accelerator. For parameters typical of a proposed beat-wave accelerator, this instability can seriously distort the incident laser pulse shapes on the particle-acceleration time scale, with detrimental consequences for particle acceleration

Reliability and Energy Output of Bifacial Modules

Energy Technology Data Exchange (ETDEWEB)

Van Aken, B.B.; Jansen, M.J.; Dekker, N.J.J. [ECN Solar Energy, Petten (Netherlands)

2013-06-15

Although flash tests under standard test conditions yields lower power due to transmittance of the back sheet, bifacial modules are expected to outperform their monofacial equivalents in terms of yearly energy output in the field. We compare flash tests for bifacial modules with and without a light scattering panel directly behind the modules: 3% more power output is obtained. We also report on the damp-heat reliability of modules with transparent back sheet. Finally we will present the results of an outdoor study comparing modules with transparent back sheet and modules with state-of-the-art AR coating on the front glass.

RFID tag modification for full depth backscatter modulation

Science.gov (United States)

Scott, Jeffrey Wayne [Pasco, WA; Pratt, Richard M [Richland, WA

2010-07-20

A modulated backscatter radio frequency identification device includes a diode detector configured to selectively modulate a reply signal onto an incoming continuous wave; communications circuitry configured to provide a modulation control signal to the diode detector, the diode detector being configured to modulate the reply signal in response to be modulation control signal; and circuitry configured to increase impedance change at the diode detector which would otherwise not occur because the diode detector rectifies the incoming continuous wave while modulating the reply signal, whereby reducing the rectified signal increases modulation depth by removing the reverse bias effects on impedance changes. Methods of improving depth of modulation in a modulated backscatter radio frequency identification device are also provided.

Statistical significance of cis-regulatory modules

Directory of Open Access Journals (Sweden)

Smith Andrew D

2007-01-01

Full Text Available Abstract Background It is becoming increasingly important for researchers to be able to scan through large genomic regions for transcription factor binding sites or clusters of binding sites forming cis-regulatory modules. Correspondingly, there has been a push to develop algorithms for the rapid detection and assessment of cis-regulatory modules. While various algorithms for this purpose have been introduced, most are not well suited for rapid, genome scale scanning. Results We introduce methods designed for the detection and statistical evaluation of cis-regulatory modules, modeled as either clusters of individual binding sites or as combinations of sites with constrained organization. In order to determine the statistical significance of module sites, we first need a method to determine the statistical significance of single transcription factor binding site matches. We introduce a straightforward method of estimating the statistical significance of single site matches using a database of known promoters to produce data structures that can be used to estimate p-values for binding site matches. We next introduce a technique to calculate the statistical significance of the arrangement of binding sites within a module using a max-gap model. If the module scanned for has defined organizational parameters, the probability of the module is corrected to account for organizational constraints. The statistical significance of single site matches and the architecture of sites within the module can be combined to provide an overall estimation of statistical significance of cis-regulatory module sites. Conclusion The methods introduced in this paper allow for the detection and statistical evaluation of single transcription factor binding sites and cis-regulatory modules. The features described are implemented in the Search Tool for Occurrences of Regulatory Motifs (STORM and MODSTORM software.

Research on modulated structure alloys

International Nuclear Information System (INIS)

Tsujimoto, Tokuzo; Saito, Kazuo; Hashimoto, Kenki

1982-01-01

Research was carried out for the purposes of clarifying the cause of modulated structure formation, developing the structure control method utilizing modulated structure and clarifying the suitability of modulated structure alloys as radiation damage-resisting materials. The research on structure control method encountered a difficulty in the analysis of experimental results, bu the following results were obtained in the other items. The method of solving a diffusion equation including a nonlinear term was found in course of the clarification of the cause of modulated structure formation. As a means of detecting faint unevenness in solid solution, of which the deviation of composition is a few %, the structure analysis method utilizing magnetic property was developed. This method was applied to Ni-9.6 at.% Ti alloy, and the process of expanding amplitude in composition variation in spinodal decomposition and the formation of solute atomshort region at the time of nucleation-growth were confirmed. Utilizing the high energy electron beam generated in a superhigh voltage electron microscope, electron beam irradiation experiment was carried out on precipitation hardening alloys with modulated structure. As the result, it was found that in Ni-Ti alloy, the amount of void swelling resistance showed the change with the increase of modulated structure period. (Kako, I.)

Polarimetric Imaging using Two Photoelastic Modulators

Science.gov (United States)

Wang, Yu; Cunningham, Thomas; Diner, David; Davis, Edgar; Sun, Chao; Hancock, Bruce; Gutt, Gary; Zan, Jason; Raouf, Nasrat

2009-01-01

A method of polarimetric imaging, now undergoing development, involves the use of two photoelastic modulators in series, driven at equal amplitude but at different frequencies. The net effect on a beam of light is to cause (1) the direction of its polarization to rotate at the average of two excitation frequencies and (2) the amplitude of its polarization to be modulated at the beat frequency (the difference between the two excitation frequencies). The resulting modulated optical light beam is made to pass through a polarizing filter and is detected at the beat frequency, which can be chosen to equal the frame rate of an electronic camera or the rate of sampling the outputs of photodetectors in an array. The method was conceived to satisfy a need to perform highly accurate polarimetric imaging, without cross-talk between polarization channels, at frame rates of the order of tens of hertz. The use of electro-optical modulators is necessitated by a need to obtain accuracy greater than that attainable by use of static polarizing filters over separate fixed detectors. For imaging, photoelastic modulators are preferable to such other electrio-optical modulators as Kerr cells and Pockels cells in that photoelastic modulators operate at lower voltages, have greater angular acceptances, and are easier to use. Prior to the conception of the present method, polarimetric imaging at frame rates of tens of hertz using photoelastic modulators was not possible because the resonance frequencies of photoelastic modulators usually lie in the range from about 20 to about 100 kHz.

Effects of communication training on real practice performance: a role-play module versus a standardized patient module.

NARCIS (Netherlands)

Schlegel, C.; Woermann, U.; Shaha, M.; Rethans, J.J.; Vleuten, C.P.M. van der

2012-01-01

This study investigated the effectiveness of modules involving standardized patients and role-plays on training communication skills. The first module involved standardized patients and an Objective Structured Clinical Examination (OSCE); the second module consisted of peer role-plays and a written

Weakly distributive modules. Applications to supplement submodules

Indian Academy of Sciences (India)

Abstract. In this paper, we define and study weakly distributive modules as a proper generalization of distributive modules. We prove that, weakly distributive supplemented modules are amply supplemented. In a weakly distributive supplemented module every submodule has a unique coclosure. This generalizes a result of ...

Flux Modulation in the Electrodynamic Loudspeaker

DEFF Research Database (Denmark)

Halvorsen, Morten; Tinggaard, Carsten; Agerkvist, Finn T.

2015-01-01

This paper discusses the effect of flux modulation in the electrodynamic loudspeaker with main focus on the effect on the force factor. A measurement setup to measure the AC flux modulation with static voice coil is explained and the measurements shows good consistency with FEA simulations....... Measurements of the generated AC flux modulation shows, that eddy currents are the main source to magnetic losses in form of phase lag and amplitude changes. Use of a copper cap shows a decrease in flux modulation amplitude at the expense of increased power losses. Finally, simulations show...... that there is a high dependency between the generated AC flux modulation from the voice coil and the AC force factor change....

Development of 10kW SOFC module

Energy Technology Data Exchange (ETDEWEB)

Hisatome, N.; Nagata, K. [Mitsubishi Heavy Industries, Ltd., Nagasaki (Japan); Kakigami, S. [Electric Power Development Co., Inc., Tokyo (Japan)] [and others

1996-12-31

Mitsubishi Heavy industries, Ltd. (MHI) has been developing tubular type Solid Oxide Fuel Cells (SOFC) since 1984. A 1 kW module of SOFC has been continuously operated for 3,000 hours with 2 scheduled thermal cycles at Electric Power Development Co., Inc. (EPDC) Wakamatsu Power Station in 1993. We have obtained of 34% (HHV as H{sub 2}) module efficiency and deterioration rate of 2% Per 1,000 hours in this field test. As for next step, we have developed 10 kW module in 1995. The 10 kW module has been operated for 5,000 hours continuously. This module does not need heating support to maintain the operation temperature, and the module efficiency was 34% (HHV as H{sub 2}). On the other hand, we have started developing the technology of pressurized SOFC. In 1996, pressurized MW module has been tested at MHI Nagasaki Shipyard & Machinery, Works. We are now planning the development of pressurized 10 kW module.

Module theory endomorphism rings and direct sum decompositions in some classes of modules

CERN Document Server

Facchini, Alberto

1998-01-01

The purpose of this expository monograph is three-fold. First, the solution of a problem posed by Wolfgang Krull in 1932 is presented. He asked whether what is now called the "Krull-Schmidt Theorem" holds for artinian modules. A negative answer was published only in 1995 by Facchini, Herbera, Levy and Vámos. Second, the answer to a question posed by Warfield in 1975, namely, whether the Krull-Schmidt-Theorem holds for serial modules, is described. Facchini published a negative answer in 1996. The solution to the Warfield problem shows an interesting behavior; in fact, it is a phenomena so rare in the history of Krull-Schmidt type theorems that its presentation to a wider mathematical audience provides the third incentive for this monograph. Briefly, the Krull-Schmidt-Theorem holds for some, not all, classes of modules. When it does hold, any two indecomposable decompositions are uniquely determined up to one permutation. For serial modules the theorem does not hold, but any two indecomposable decompositions ...

Building CMS Pixel Barrel Detectur Modules

CERN Document Server

König, S; Horisberger, R.; Meier, B.; Rohe, T.; Streuli, S.; Weber, R.; Kastli, H.Chr.; Erdmann, W.

2007-01-01

For the barrel part of the CMS pixel tracker about 800 silicon pixel detector modules are required. The modules are bump bonded, assembled and tested at the Paul Scherrer Institute. This article describes the experience acquired during the assembly of the first ~200 modules.

APOLLO 10 ASTRONAUT ENTERS LUNAR MODULE SIMULATOR

Science.gov (United States)

1969-01-01

Apollo 10 lunar module pilot Eugene A. Cernan prepares to enter the lunar module simulator at the Flight Crew Training Building at the NASA Spaceport. Cernan, Apollo 10 commander Thomas P. Stafford and John W. Young, command module pilot, are to be launched May 18 on the Apollo 10 mission, a dress rehearsal for a lunar landing later this summer. Cernan and Stafford are to detach the lunar module and drop to within 10 miles of the moon's surface before rejoining Young in the command/service module. Looking on as Cernan puts on his soft helmet is Snoopy, the lovable cartoon mutt whose name will be the lunar module code name during the Apollo 10 flight. The command/service module is to bear the code name Charlie Brown.

Intensity-modulated radiation therapy: overlapping co-axial modulated fields

International Nuclear Information System (INIS)

Metcalfe, P; Tangboonduangjit, P; White, P

2004-01-01

The Varian multi-leaf collimator has a 14.5 cm leaf extension limit from each carriage. This means the target volumes in the head and neck region are sometimes too wide for standard width-modulated fields to provide adequate dose coverage. A solution is to set up asymmetric co-axial overlapping fields. This protects the MLC carriage while in return the MLC provides modulated dose blending in the field overlap region. Planar dose maps for coincident fields from the Pinnacle radiotherapy treatment planning system are compared with planar dose maps reconstructed from radiographic film and electronic portal images. The film and portal images show small leaf-jaw matchlines at each field overlap border. Linear profiles taken across each image show that the observed leaf-jaw matchlines from the accelerator images are not accounted for by the treatment planning system. Dose difference between film reconstructed electronic portal images and planning system are about 2.5 cGy in a modulated field at d max . While the magnitude of the dose differences are small improved round end leaf modelling combined with a finer dose calculation grid may minimize the discrepancy between calculated and delivered dose

WDM Phase-Modulated Millimeter-Wave Fiber Systems

DEFF Research Database (Denmark)

Yu, Xianbin; Prince, Kamau; Gibbon, Timothy Braidwood

2012-01-01

This chapter presents a computer simulation case study of two typical WDM phase-modulated millimeter-wave systems. The phase-modulated 60 GHz fiber multi-channel transmission systems employ single sideband (SSB) and double sideband subcarrier modulation (DSB-SC) schemes and present one of the lat......This chapter presents a computer simulation case study of two typical WDM phase-modulated millimeter-wave systems. The phase-modulated 60 GHz fiber multi-channel transmission systems employ single sideband (SSB) and double sideband subcarrier modulation (DSB-SC) schemes and present one...... of the latest research efforts in the rapidly emerging Radio-over-Fiber (RoF) application space for in-house access networks....

Qualification standard for photovoltaic concentrator modules

Energy Technology Data Exchange (ETDEWEB)

McConnell, R.; Kurtz, S.; Bottenberg, W. R.; Hammond, R.; Jochums, S. W.; McDanal, A. J.; Roubideaux, D.; Whitaker, C.; Wohlgemuth, J.

2000-05-05

The paper describes a proposed qualification standard for photovoltaic concentrator modules. The standard's purpose is to provide stress tests and procedures to identify any component weakness in photovoltaic concentrator modules intended for power generation applications. If no weaknesses are identified during qualification, both the manufacturer and the customer can expect a more reliable product. The qualification test program for the standard includes thermal cycles, humidity-freeze cycles, water spray, off-axis beam damage, hail impact, hot-spot endurance, as well as electrical tests for performance, ground continuity, isolation, wet insulation resistance, and bypass diodes. Because concentrator module performance can not be verified using solar simulator and reference cell procedures suitable for flat-plate modules, the standard specifies an outdoor I-V test analysis allowing a performance comparison before and after a test procedure. Two options to this complex analysis are the use of a reference concentrator module for side-by-side outdoor comparison with modules undergoing various tests and a dark I-V performance check.

Improvement of Shade Resilience in Photovoltaic Modules Using Buck Converters in a Smart Module Architecture

Directory of Open Access Journals (Sweden)

S. Zahra Mirbagheri Golroodbari

2018-01-01

Full Text Available Partial shading has a nonlinear effect on the performance of photovoltaic (PV modules. Different methods of optimizing energy harvesting under partial shading conditions have been suggested to mitigate this issue. In this paper, a smart PV module architecture is proposed for improvement of shade resilience in a PV module consisting of 60 silicon solar cells, which compensates the current drops caused by partial shading. The architecture consists of groups of series-connected solar cells in parallel to a DC-DC buck converter. The number of cell groups is optimized with respect to cell and converter specifications using a least-squares support vector machine method. A generic model is developed to simulate the behavior of the smart architecture under different shading patterns, using high time resolution irradiance data. In this research the shading patterns are a combination of random and pole shadows. To investigate the shade resilience, results for the smart architecture are compared with an ideal module, and also ordinary series and parallel connected architectures. Although the annual yield for the smart architecture is 79.5% of the yield of an ideal module, we show that the smart architecture outperforms a standard series connected module by 47%, and a parallel architecture by 13.4%.

Medical Terminology: Suffixes. Health Occupations Education Module.

Science.gov (United States)

Temple Univ., Philadelphia, PA. Div. of Vocational Education.

This module on medical terminology (suffixes) is one of 17 modules designed for individualized instruction in health occupations education programs at both the secondary and postsecondary levels. This module consists of an introduction to the module topic, a list of resources needed, and three learning experiences. The first two learning…

Health Occupations Module. The Skeletal System--I.

Science.gov (United States)

Temple Univ., Philadelphia, PA. Div. of Vocational Education.

This module on the skeletal system is one of eight modules designed for individualized instruction in health occupations education programs at both the secondary and postsecondary levels. This module contains an introduction to the module topic, three objectives (e.g., define the skeletal system and list its functions), and three learning…

Graphene based terahertz phase modulators

Science.gov (United States)

Kakenov, N.; Ergoktas, M. S.; Balci, O.; Kocabas, C.

2018-07-01

Electrical control of amplitude and phase of terahertz radiation (THz) is the key technological challenge for high resolution and noninvasive THz imaging. The lack of active materials and devices hinders the realization of these imaging systems. Here, we demonstrate an efficient terahertz phase and amplitude modulation using electrically tunable graphene devices. Our device structure consists of electrolyte-gated graphene placed at quarter wavelength distance from a reflecting metallic surface. In this geometry, graphene operates as a tunable impedance surface which yields electrically controlled reflection phase. Terahertz time domain reflection spectroscopy reveals the voltage controlled phase modulation of π and the reflection modulation of 50 dB. To show the promises of our approach, we demonstrate a multipixel phase modulator array which operates as a gradient impedance surface.

Specification of the GummyModule Language

NARCIS (Netherlands)

Malakuti Khah Olun Abadi, Somayeh

2012-01-01

The GummyModule language is an extension to the Java language and is the successor of the EventReactor language The GummyModule language adopts the linguistic constructs of offered by EventReactor to define event types, events and to publish events. As for EventReactor, GummyModule facilitates

New Technologies for Managing Cotton Modules

Science.gov (United States)

The use of RFID transponders in the module tags on round modules formed by John Deere harvesters has opened up new possibilities for managing modules and harvest data. Tools are needed to help integrate this new technology and provide additional value to growers and ginners. A mobile application w...

Health Occupations Module. The Skeletal System--II.

Science.gov (United States)

Temple Univ., Philadelphia, PA. Div. of Vocational Education.

This module on the skeletal system is one of eight modules designed for individualized instruction in health occupations education programs at both the secondary and postsecondary levels. This module contains an introduction to the module topic, two objectives (e.g., list the types of joints and movements, and give examples), and two learning…

Cross-flow filtration of yeast extract with multi-tubular membrane module and rotating-disk membrane module; Makukaitengata heibanmaku module to tankanjomaku module ni yoru kobo hasaieki no cross flow roka

Energy Technology Data Exchange (ETDEWEB)

Matsushita, K.; Shimizu, Y.; Watanabe, a. [Toto Ltd., Kitakyushu (Japan)

1994-09-15

A membrane separation experiment was made with multi-tubular membrane module and rotating-disk membrane module to study the cross-flow filtration of yeast extract. The membrane was an alumina precision filtration membrane with 0.15 micron m diameter pores. A multi-tubular membrane which was 19 in number of channels and 0.113{sup 2} in effective membrane area was fitted to the multi-tubular membrane module. A rotating-disk membrane which was 0.071m{sup 2} in effective membrane area was fitted to the rotating-disk membrane module. Judging from the concentration speed and factor, the rotating-disk type is more advantageous in concentrating the suspension than the multi-tubular type. The soluble high-molecular component was more easily filtrated through the rotating-disk type, which is judged attributable to its possible operation at a high flow rate on the membrane surface without necessitating a high-flow rate circulation pump. As compared with the conventional cross-filtration type, the rotating-disk type gives a high permeate flux even at a high concentration factor. 11 refs., 5 figs.

NEMS integrating module documentation report

Energy Technology Data Exchange (ETDEWEB)

1993-12-14

The National Energy Modeling System (NEMS) is a computer modeling system that produces a general equilibrium solution for energy supply and demand in the US energy markets. The model achieves a supply and demand balance in the end-use demand regions, defined as the nine Census Divisions, by solving for the prices of each energy type such that the quantities producers are willing to supply equal the quantities consumers wish to consume. The system reflects market economics, industry structure, and energy policies and regulations that influence market behavior. The NEMS Integrating Module is the central integrating component of a complex modeling system. As such, a thorough understanding of its role in the modeling process can only be achieved by placing it in the proper context with respect to the other modules. To that end, this document provides an overview of the complete NEMS model, and includes brief descriptions of the modules with which the Integrating Module interacts. The emphasis and focus, however, is on the structure and function of the Integrating Module of NEMS.

The CRESST-III detector module

Energy Technology Data Exchange (ETDEWEB)

Wuestrich, Marc [Max-Planck-Institut f. Physik (Werner-Heisenberg-Institut) (Germany); Collaboration: CRESST-Collaboration

2016-07-01

The direct dark matter experiment CRESST uses scintillating calorimeters to detected WIMP induced nuclear scattering in CaWO{sub 4} single crystals. Equipped with transition edge sensors (TESs), these detectors can achieve detection thresholds well below 1 keV. The last physics run of CRESST-II proved the high potential of the experiment especially for small WIMP masses and triggered the development of a new detector module using much smaller CaWO{sub 4} main absorbers. The upcoming CRESST-III run will mainly be equipped with these newly developed modules, which combine a fully scintillating detector housing with an improved detection threshold (<100 keV). While many features of the new module were adapted from previous module designs in an improved way, also new features are implemented like instrumented sticks (iSticks) holding the crystals and optimized TES structures for phonon and light detectors. First tests above ground validated the improved performance of these detector modules and promise to explore new regions in the WIMP parameter space in the next CRESST-III run.

Groups, rings, modules

CERN Document Server

Auslander, Maurice

2014-01-01

This classic monograph is geared toward advanced undergraduates and graduate students. The treatment presupposes some familiarity with sets, groups, rings, and vector spaces. The four-part approach begins with examinations of sets and maps, monoids and groups, categories, and rings. The second part explores unique factorization domains, general module theory, semisimple rings and modules, and Artinian rings. Part three's topics include localization and tensor products, principal ideal domains, and applications of fundamental theorem. The fourth and final part covers algebraic field extensions

47 CFR 101.141 - Microwave modulation.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false Microwave modulation. 101.141 Section 101.141... SERVICES Technical Standards § 101.141 Microwave modulation. (a) Microwave transmitters employing digital modulation techniques and operating below 25.25 GHz (except for MVDDS stations in the 12,200-12,700 MHz band...

Applying Economics Using Interactive Learning Modules

Science.gov (United States)

Goma, Ophelia D.

2010-01-01

This article describes the use of web-based, interactive learning modules in the principles of economics course. The learning modules introduce students to important, historical economic events while providing real-world application of the economic theory presented in class. Each module is designed to supplement and complement the economic theory…

Armstrong practices in Lunar Module simulator

Science.gov (United States)

1969-01-01

Neil A. Armstrong, Commander for the Apollo 11 Moon-landing mission, practices for the historic event in a Lunar Module simulator in the Flight Crew Training building at KSC. Accompanying Armstrong on the Moon flight will be Command Module Pilot Michael Collins and Lunar Module Pilot Edwin E. Aldrin Jr.

Customized PEC modules. Final report

Energy Technology Data Exchange (ETDEWEB)

Soerensen, Martin B. (DTI, Taastrup (Denmark))

2012-07-01

The purpose of the project ''Customized PEC modules'' was to move from the production hand-made individual DSCs (dye-sensitized solar cells) in the laboratory to the production of DSC modules in a semi-automated process. At the same time allowing sufficient variation in the product's specification for real tailoring of the product to the application. The tailoring can be related to the module's electrical output and size, but also to the possibility of designing patterns for decoration or communication purposes by playing around with the shape, size and layout of the individual cells forming the module. This was to be accomplished mainly by screen printing of DSC components on glass substrates at Mekoprint. For reaching this goal the work was divided into a number of steps. The central part of the work done was in the initial conception activity and the following manufacturing activity. An activity regarding optimization included several tasks of optimization and adaptation of the existing laboratory process for manufacturing of the DSCs. Finally, work focused on international activities was done. All the steps needed for the production of customized DSC modules have been demonstrated in this project. In combination with the development of a high performing printable sealant and sealing method all the prerequisites for producing customized DSC modules have been demonstrated. (LN)

SUPPORT CARD FOR THE FORWARD SCT MODULE

CERN Document Server

Greenall, A

2002-01-01

Previously in the development and testing stage of ATLAS SCT Forward modules support cards have been used which interface the module to the DAQ by using only the Redundant inputs for the module configuration and the 'spying' of the ABCD Master chip(s) data. As module development has matured there is now a necessity to be able to test modules in the laboratory using also their Primary input/output data routes i.e. using the optical chips DORIC [1] and VDC [2] but without the need of optical fibres. A Forward Kapton Support Card, FKSC, has been developed so that both Primary and Redundant data routes can be used for module testing.

Space Experiment Module (SEM)

Science.gov (United States)

Brodell, Charles L.

1999-01-01

The Space Experiment Module (SEM) Program is an education initiative sponsored by the National Aeronautics and Space Administration (NASA) Shuttle Small Payloads Project. The program provides nationwide educational access to space for Kindergarten through University level students. The SEM program focuses on the science of zero-gravity and microgravity. Within the program, NASA provides small containers or "modules" for students to fly experiments on the Space Shuttle. The experiments are created, designed, built, and implemented by students with teacher and/or mentor guidance. Student experiment modules are flown in a "carrier" which resides in the cargo bay of the Space Shuttle. The carrier supplies power to, and the means to control and collect data from each experiment.

Solid-state membrane module

Science.gov (United States)

Gordon, John Howard [Salt Lake City, UT; Taylor, Dale M [Murray, UT

2011-06-07

Solid-state membrane modules comprising at least one membrane unit, where the membrane unit has a dense mixed conducting oxide layer, and at least one conduit or manifold wherein the conduit or manifold comprises a dense layer and at least one of a porous layer and a slotted layer contiguous with the dense layer. The solid-state membrane modules may be used to carry out a variety of processes including the separating of any ionizable component from a feedstream wherein such ionizable component is capable of being transported through a dense mixed conducting oxide layer of the membrane units making up the membrane modules. For ease of construction, the membrane units may be planar.

Time domain spectral phase encoding/DPSK data modulation using single phase modulator for OCDMA application.

Science.gov (United States)

Wang, Xu; Gao, Zhensen; Kataoka, Nobuyuki; Wada, Naoya

2010-05-10

A novel scheme using single phase modulator for simultaneous time domain spectral phase encoding (SPE) signal generation and DPSK data modulation is proposed and experimentally demonstrated. Array- Waveguide-Grating and Variable-Bandwidth-Spectrum-Shaper based devices can be used for decoding the signal directly in spectral domain. The effects of fiber dispersion, light pulse width and timing error on the coding performance have been investigated by simulation and verified in experiment. In the experiment, SPE signal with 8-chip, 20GHz/chip optical code patterns has been generated and modulated with 2.5 Gbps DPSK data using single modulator. Transmission of the 2.5 Gbps data over 34km fiber with BEROCDMA) and secure optical communication applications. (c) 2010 Optical Society of America.

Standard Chinese: A Modular Approach. Student Workbook. Module 3: Money; Module 4: Directions.

Science.gov (United States)

Defense Language Inst., Monterey, CA.

Texts in spoken Standard Chinese were developed to improve and update Chinese materials and to reflect current usage in Beijing and Taipei. The focus is on communicating in Chinese in practical situations. The overall course is organized into 10 situational modules, student workbooks, and resource modules. This workbook covers the money and…

Standard Chinese: A Modular Approach. Student Text. Module 3: Money; Module 4: Directions.

Science.gov (United States)

Defense Language Inst., Monterey, CA.

Texts in spoken Standard Chinese were developed to improve and update Chinese materials to reflect current usage in Beijing and Taipei. The focus is on communicating in practical situations, and the texts summarize and supplement tapes. The overall course is organized into 10 situational modules, student workbooks, and resource modules. This text…

Global model structures for ∗-modules

DEFF Research Database (Denmark)

Böhme, Benjamin

2018-01-01

We extend Schwede's work on the unstable global homotopy theory of orthogonal spaces and L-spaces to the category of ∗-modules (i.e., unstable S-modules). We prove a theorem which transports model structures and their properties from L-spaces to ∗-modules and show that the resulting global model...... structure for ∗-modules is monoidally Quillen equivalent to that of orthogonal spaces. As a consequence, there are induced Quillen equivalences between the associated model categories of monoids, which identify equivalent models for the global homotopy theory of A∞-spaces....

Photovoltaic module energy rating methodology development

Energy Technology Data Exchange (ETDEWEB)

Kroposki, B.; Myers, D.; Emery, K.; Mrig, L. [National Renewable Energy Lab., Golden, CO (United States); Whitaker, C.; Newmiller, J. [Endecon Engineering, San Ramon, CA (United States)

1996-05-01

A consensus-based methodology to calculate the energy output of a PV module will be described in this paper. The methodology develops a simple measure of PV module performance that provides for a realistic estimate of how a module will perform in specific applications. The approach makes use of the weather data profiles that describe conditions throughout the United States and emphasizes performance differences between various module types. An industry-representative Technical Review Committee has been assembled to provide feedback and guidance on the strawman and final approach used in developing the methodology.

High Order Modulation Protograph Codes

Science.gov (United States)

Nguyen, Thuy V. (Inventor); Nosratinia, Aria (Inventor); Divsalar, Dariush (Inventor)

2014-01-01

Digital communication coding methods for designing protograph-based bit-interleaved code modulation that is general and applies to any modulation. The general coding framework can support not only multiple rates but also adaptive modulation. The method is a two stage lifting approach. In the first stage, an original protograph is lifted to a slightly larger intermediate protograph. The intermediate protograph is then lifted via a circulant matrix to the expected codeword length to form a protograph-based low-density parity-check code.

Laser modulator for LISA pathfinder

Science.gov (United States)

Voland, C.; Lund, G.; Coppoolse, W.; Crosby, P.; Stadler, M.; Kudielka, K.; Özkan, C.

2017-11-01

LISA Pathfinder is an ESA experiment to demonstrate the key technologies needed for the LISA mission to detect gravitational waves in space. The LISA Pathfinder spacecraft represents one arm of the LISA interferometer, containing an optical metrology system and two proof masses as inertial references for the drag-free control system. The LISA Pathfinder payload consists of two drag-free floating test masses located in the inertial sensors with their control electronics and an optical metrology subsystem. The optical metrology subsystem monitors the movement of both test masses relative to each other and to the spacecraft with very high sensitivity and resolution. This is achieved with a heterodyne Mach- Zehnder interferometer. This interferometer requires as input two coherent laser beams with a heterodyne frequency difference of a few kHz. To generate the two laser beams with a heterodyne frequency difference a Nd:YAG laser is used together with the Laser Modulator. The Nd:YAG laser generates a single coherent laser signal at a wavelength of 1064nm which is fibre coupled to the Laser Modulator. The Laser Modulator then generates the two optical beams with the required heterodyne frequency offset. In addition, the Laser Modulator is required to perform laser amplitude stabilization and optical path difference control for the two optical signals. The Laser Modulator consists of an optical unit - the LMU - and RF synthesiser, power amplification and control electronics. These electronics are all housed in the Laser Modulator Electronics (LME). The LMU has four primary functions: • Splitting of the input laser beam into two paths for later superposition in the interferometer. • Applying different frequency shifts to each of the beams. • Providing amplitude modulation control to each of the beams. • Providing active control of the optical path length difference between the two optical paths. The present paper describes the design and performance of the LMU

Strain absorbent modules for cavity filling

Energy Technology Data Exchange (ETDEWEB)

1981-04-01

Strain absorbent modules made from weldmesh panels and helical steel binders can be used, together with timber packing, to support the roof and sides of cavities instead of softwood and hardwood nogs. A description of these modules and a series of load tests and underground trials carried out on the modules is given.

Auditory object formation affects modulation perception

DEFF Research Database (Denmark)

Piechowiak, Tobias

2005-01-01

Most sounds in our environment, including speech, music, animal vocalizations and environmental noise, have fluctuations in intensity that are often highly correlated across different frequency regions. Because across-frequency modulation is so common, the ability to process such information...... is thought to be a powerful survival strategy in the natural world (Klump, 1996; Nelken et al., 1999). Coherent modulations in one sound can aid in the detection of another sound (Hall et al., 1984; Durlach, 1963). On the other hand, modulation in one frequency region can also impede the detection...... or discrimination of modulation in other frequency regions (Yost et al., 1989). Although the neural substrates for across-frequency modulation processing remain unclear, recent studies have concentrated on brainstem structures (Pressnitzer et al., 2001). In this study it is shown that sounds occurring after...

The AC photovoltaic module is here!

Science.gov (United States)

Strong, Steven J.; Wohlgemuth, John H.; Wills, Robert H.

1997-02-01

This paper describes the design, development, and performance results of a large-area photovoltaic module whose electrical output is ac power suitable for direct connection to the utility grid. The large-area ac PV module features a dedicated, integrally mounted, high-efficiency dc-to-ac power inverter with a nominal output of 250 watts (STC) at 120 Vac, 60 H, that is fully compatible with utility power. The module's output is connected directly to the building's conventional ac distribution system without need for any dc wiring, string combiners, dc ground-fault protection or additional power-conditioning equipment. With its advantages, the ac photovoltaic module promises to become a universal building block for use in all utility-interactive PV systems. This paper discusses AC Module design aspects and utility interface issues (including islanding).

Efficient Implementation of Complex Modulated Filter Banks Using Cosine and Sine Modulated Filter Banks

Directory of Open Access Journals (Sweden)

Viholainen Ari

2006-01-01

Full Text Available The recently introduced exponentially modulated filter bank (EMFB is a -channel uniform, orthogonal, critically sampled, and frequency-selective complex modulated filter bank that satisfies the perfect reconstruction (PR property if the prototype filter of an -channel PR cosine modulated filter bank (CMFB is used. The purpose of this paper is to present various implementation structures for the EMFBs in a unified framework. The key idea is to use cosine and sine modulated filter banks as building blocks and, therefore, polyphase, lattice, and extended lapped transform (ELT type of implementation solutions are studied. The ELT-based EMFBs are observed to be very competitive with the existing modified discrete Fourier transform filter banks (MDFT-FBs when comparing the number of multiplications/additions and the structural simplicity. In addition, EMFB provides an alternative channel stacking arrangement that could be more natural in certain subband processing applications and data transmission systems.

Prinsip-Prinsip Dasar Pengembangan Modul Berpendekatan Hypercontent

Directory of Open Access Journals (Sweden)

Dewi Salma Prawiradilaga

2018-01-01

Full Text Available Artikel ini menguraikan prinsip-prinsip dasar pengembangan modul dengan pendekatan hypercontent. Berbeda dengan modul konvensional yang berlogika linier, prosedural, dan relatif kaku, modul berpendekatan hypercontent didesain menggunakan logika postmodern yang relatif non-linier, acak, dan fleksibel. Dengan demikian desain modul berpendekatan hypercontent memberikan kesempatan bagi penggunanya untuk mempelajari dari sisi mana saja sesuai kebutuhan belajar. Tidak diharuskan memulai dari materi yang berada pada urutan pertama. Pendekatan hypercontent mengarahkan desain modul diperkaya oleh sumber-sumber belajar di dunia maya. Caranya dengan membuat tautan ke laman website, saluran YouTube, dan lainnya melalui URL, QR code dan sejenisnya. Pendekatan hypercontent dipadukan dengan pendekatan technological, pedagogical, content-knowledge menjadikan substansi modul yang dikembangkan lengkap dilihat dari sisi kesesuaian dan kekayaan materi serta kesesuaian pendekatan pedagogiknya. This article describes the basic foundations of the module development using hypercontent approach. Different from the conventional one wich is more linier, procedural, and rigid, hypercontent approach module are developed under postmodern logic of thinking which is more non-linear, non-sequential, and flexible. Thus, hypercontent modul open an opportunity for the student to use it in non-sequential and non-procedural ways according to their own learning need wich are different from one another. In this case there is no obligation to start the learning process from the first chapter. Hypercontent module approach also enriched its content by lots of learning resources from the internet by creating linkages to several appropriates webpages, YouTube channels, and others via URL, QR code and etc. Hypercontent approach combined with technological, pedagogical, content-knowledge approach make the substance of the modul more complete in terms of its pedagogical appropriateness and

Module theory endomorphism rings and direct sum decompositions in some classes of modules

CERN Document Server

Facchini, Alberto

1998-01-01

This expository monograph was written for three reasons. Firstly, we wanted to present the solution to a problem posed by Wolfgang Krull in 1932 [Krull 32]. He asked whether what we now call the "Krull-Schmidt Theorem" holds for ar­ tinian modules. The problem remained open for 63 years: its solution, a negative answer to Krull's question, was published only in 1995 (see [Facchini, Herbera, Levy and Vamos]). Secondly, we wanted to present the answer to a question posed by Warfield in 1975 [Warfield 75]. He proved that every finitely pre­ sented module over a serial ring is a direct sum of uniserial modules, and asked if such a decomposition was unique. In other words, Warfield asked whether the "Krull-Schmidt Theorem" holds for serial modules. The solution to this problem, a negative answer again, appeared in [Facchini 96]. Thirdly, the so­ lution to Warfield's problem shows interesting behavior, a rare phenomenon in the history of Krull-Schmidt type theorems. Essentially, the Krull-Schmidt Theorem holds f...

VME Data Acquisition Modules for MINERvA Experiment

Energy Technology Data Exchange (ETDEWEB)

Baldin, B.; /fermilab

2010-01-01

This document describes two VME modules developed for MINERvA experiment at Fermilab. The Chain ReadOut Controller (CROC) module has four serial data channels and can interface with up to 48 front-ends using standard CAT5e networking cable. The data transmission rate of each channel is 160 Mbit/s. The maximum data transmission rate via VME bus is {approx}18 MB/s. The Chain Readout Interface Module (CRIM) is designed to provide various interface functions for the CROC module. It is compatible with MINOS MTM timing module and can be used to distribute timing signals to four CROC modules. The CRIM module also has a data port compatible with the CROC serial data interface. The data port can be used for diagnostic purpose and can generate triggers from front-end events. The CRIM module is a standard D08(O) interrupter module.

First modules of ATLAS's great accordion

CERN Multimedia

2001-01-01

The first CERN-built module of the barrel section of ATLAS's electromagnetic calorimeter has just been completed. This is the second in a series of 32 modules that will make up the final detector. These accordion-shaped structures will give precise measurements of the energy of particles produced in the LHC. The first CERN-built module of the barrel section of ATLAS's electromagnetic calorimeter nearing completion. Behind the module, from left to right: Ralf Huber, Andreas Bies and Jorgen Beck Hansen. In front of the module, from left to right: Philippe Lançon and Edward Wood. The builders of the ATLAS electromagnetic calorimeter are masters in the art of folding! To find out why, just take a look inside Hall 184, where the first CERN-built module of ATLAS's electromagnetic calorimeter has just been completed. It is the second in a long series, the first having been completed at the Saclay Laboratory of France's Commissariat à l'Energie Atomique just a few weeks ago. Thirty more remain...

Advanced reliability improvement of AC-modules (ARIA)

International Nuclear Information System (INIS)

Rooij, P.; Real, M.; Moschella, U.; Sample, T.; Kardolus, M.

2001-09-01

The AC-module is a relatively new development in PV-system technology and offers significant advantages over conventional PV-systems with a central inverter : e.g. increased modularity, ease of installation and freedom of system design. The Netherlands and Switzerland have a leading position in the field of AC-modules, both in terms of technology and of commercial and large-scale application. An obstacle towards large-scale market introduction of AC-modules is that the reliability and operational lifetime of AC-modules and the integrated inverters in particular are not yet proven. Despite the advantages, no module-integrated inverter has yet achieved large scale introduction. The AC-modules will lower the barrier towards market penetration. But due to the great interest in the new AC-module technology there is the risk of introducing a not fully proven product. This may damage the image of PV-systems. To speed up the development and to improve the reliability, research institutes and PV-industry will address the aspects of reliability and operational lifetime of AC-modules. From field experiences we learn that in general the inverter is still the weakest point in PV-systems. The lifetime of inverters is an important factor on reliability. Some authors are indicating a lifetime of 1.5 years, whereas the field experiences in Germany and Switzerland have shown that for central inverter systems, an availability of 97% has been achieved in the last years. From this point of view it is highly desirable that the operational lifetime and reliability of PV-inverters and especially AC-modules is demonstrated/improved to make large scale use of PV a success. Module Integrated Inverters will most likely be used in modules in the power range between 100 and 300 Watt DC-power. These are modules with more than 100 cells in series, assuming that the module inverter will benefit from the higher voltage. Hot-spot is the phenomenon that can occur when one or more cells of a string

Mass productions of thin film silicon PV modules

International Nuclear Information System (INIS)

Tawada, Y.; Yamagishi, H.; Yamamoto, K.

2003-01-01

Mass production technologies of a-Si single junction and a-Si/poly-Si hybrid modules with stable 8% and 10% efficiency were developed in the Shiga factory of Kaneka Corporation. Kaneka instituted Kaneka Solartech Corporation (KST) as a subsidiary company of 100% shareholder and invested 20 MW production plant in Toyooka City in 1999. There are fully automatic thin film fabrication equipments. KST started the manufacturing amorphous silicon PV modules in 1999 and those of hybrid type PV modules in 2001. The largest size glass substrates used for these modules are 95x98 cm and variable size of modules are being produced by cutting these large area base modules. Recent production yields are higher than 98%. Production technologies of a-Si, thin c-Si and solar cells, performances of modules, applications to the rooftop PV systems will be presented. We estimate the production cost of a-Si solar modules and a-Si/thin c-Si hybrid solar modules. The future business plan of our new type solar modules and our production lines will be discussed. (author)

Novel electro-optical phase modulator based on GaInAs/InP modulation-doped quantum-well structures

DEFF Research Database (Denmark)

Thirstrup, C.

1992-01-01

A novel electro-optical phase modulator working at 1.55 µm is analyzed and proposed. It is shown by a numerical model that in a GaInAs/InP pn-nin-pn multiple-quantum-well waveguide structure, large optical phase modulation can be obtained at small intensity modulation and with improved performance...

Light intensity modulation in phototherapy

Science.gov (United States)

Lukyanovich, P. A.; Zon, B. A.; Kunin, A. A.; Pankova, S. N.

2015-04-01

A hypothesis that blocking ATP synthesis is one of the main causes of the stimulating effect is considered based on analysis of the primary photostimulation mechanisms. The light radiation intensity modulation is substantiated and the estimates of such modulation parameters are made. An explanation is offered to the stimulation efficiency decrease phenomenon at the increase of the radiation dose during the therapy. The results of clinical research of the medical treatment in preventive dentistry are presented depending on the spectrum and parameters of the light flux modulation.

Reconfigurable WDM-PON empowered by a low-cost 8-channel directly modulated laser module

Science.gov (United States)

Zhang, Yi-ming; Liu, Yu; Zhang, Zhi-ke; Zhao, Ze-ping; Tian, Ye; Zhu, Ning-hua

2017-11-01

A 10 Gbit/s 16-km-long reconfigurable wavelength-division-multiplexing passive optical network (WDM-PON) is presented empowered by a low-cost multi-channel directly modulated laser (DML) module. Compared with the case using discrete devices in conventional scheme, the proposed DML module provides a cost-effective solution with reduced complexity. The clear eye diagram and the bit error rate ( BER) of less than 2×10-7 with a sensitivity of -7 dBm are obtained. Due to the special packaging design, the crosstalk between channels under condition of simultaneous operation can be negligible.

Modulation of gene expression made easy

DEFF Research Database (Denmark)

Solem, Christian; Jensen, Peter Ruhdal

2002-01-01

A new approach for modulating gene expression, based on randomization of promoter (spacer) sequences, was developed. The method was applied to chromosomal genes in Lactococcus lactis and shown to generate libraries of clones with broad ranges of expression levels of target genes. In one example...... that the method can be applied to modulating the expression of native genes on the chromosome. We constructed a series of strains in which the expression of the las operon, containing the genes pfk, pyk, and ldh, was modulated by integrating a truncated copy of the pfk gene. Importantly, the modulation affected...

The FPAX fastbus module

International Nuclear Information System (INIS)

Barlag, S.; Bouquet, B.; Lavigne, B.; Rypko, J.

1989-07-01

The FPAX is a Fastbus module with 4 independent, 2 slave and 2 master, ports on two segments. It operates as a normal master on either segment or as a Block-Mover on both. The processor board is based on a 68020 microprocessor. A local/network switch allows operation as a host or as a normal module on the Fastbus network

Waveform Sampler CAMAC Module

International Nuclear Information System (INIS)

Freytag, D.R.; Haller, G.M.; Kang, H.; Wang, J.

1985-09-01

A Waveform Sampler Module (WSM) for the measurement of signal shapes coming from the multi-hit drift chambers of the SLAC SLC detector is described. The module uses a high speed, high resolution analog storage device (AMU) developed in collaboration between SLAC and Stanford University. The AMU devices together with high speed TTL clocking circuitry are packaged in a hybrid which is also suitable for mounting on the detector. The module is in CAMAC format and provides eight signal channels, each recording signal amplitude versus time in 512 cells at a sampling rate of up to 360 MHz. Data are digitized by a 12-bit ADC with a 1 μs conversion time and stored in an on-board memory accessible through CAMAC

Modulation-Frequency-Specific Adaptation in Awake Auditory Cortex

Science.gov (United States)

Beitel, Ralph E.; Vollmer, Maike; Heiser, Marc A.; Schreiner, Christoph E.

2015-01-01

Amplitude modulations are fundamental features of natural signals, including human speech and nonhuman primate vocalizations. Because natural signals frequently occur in the context of other competing signals, we used a forward-masking paradigm to investigate how the modulation context of a prior signal affects cortical responses to subsequent modulated sounds. Psychophysical “modulation masking,” in which the presentation of a modulated “masker” signal elevates the threshold for detecting the modulation of a subsequent stimulus, has been interpreted as evidence of a central modulation filterbank and modeled accordingly. Whether cortical modulation tuning is compatible with such models remains unknown. By recording responses to pairs of sinusoidally amplitude modulated (SAM) tones in the auditory cortex of awake squirrel monkeys, we show that the prior presentation of the SAM masker elicited persistent and tuned suppression of the firing rate to subsequent SAM signals. Population averages of these effects are compatible with adaptation in broadly tuned modulation channels. In contrast, modulation context had little effect on the synchrony of the cortical representation of the second SAM stimuli and the tuning of such effects did not match that observed for firing rate. Our results suggest that, although the temporal representation of modulated signals is more robust to changes in stimulus context than representations based on average firing rate, this representation is not fully exploited and psychophysical modulation masking more closely mirrors physiological rate suppression and that rate tuning for a given stimulus feature in a given neuron's signal pathway appears sufficient to engender context-sensitive cortical adaptation. PMID:25878263

Direct RF modulation transmitter, sampling clock frequency setting method for direct RF modulation transmitter

NARCIS (Netherlands)

Fukuda, Shuichi; Nauta, Bram

2013-01-01

PROBLEM TO BE SOLVED: To provide a direct RF modulation transmitter capable of satisfying a radiation level regulation even without providing a SAW filter. SOLUTION: A direct RF modulation transmitter includes: digital/RF converters 105, 106 to which an I digital baseband signal, a Q digital

Direct RF modulation transmitter, sampling clock frequency setting method for direct RF modulation transmitter

NARCIS (Netherlands)

Fukuda, Shuichi; Nauta, Bram

2014-01-01

PROBLEM TO BE SOLVED: To provide a direct RF modulation transmitter capable of satisfying a radiation level regulation even without providing a SAW filter. SOLUTION: A direct RF modulation transmitter includes: digital/RF converters 105, 106 to which an I digital baseband signal, a Q digital

Some auxiliary technology equipment for ATLAS hadron calorimeter module and submodule manipulations and the quality control of the assembled module

International Nuclear Information System (INIS)

Budagov, Yu.; Lebedev, A.; Lomakin, Yu.; Romanov, V.; Rusakovich, N.; Shchelchkov, A.; Sisakyan, A.; Sorokina, Yu.; Topilin, N.; Kul'chitskij, Yu.

1997-01-01

Describing of the auxiliary technology equipment for the submodule and module manipulations is presented. The results of the 0-module beam incoming control are given. The variations of the assembled module control measurements are described. The description of the construction for the 0-module transportation is presented

Geometric phase modulation for stellar interferometry

International Nuclear Information System (INIS)

Roy, M.; Boschung, B.; Tango, W.J.; Davis, J.

2002-01-01

Full text: In a long baseline optical interferometer, the fringe visibility is normally measured by modulation of the optical path difference between the two arms of the instruments. To obtain accurate measurements, the spectral bandwidth must be narrow, limiting the sensitivity of the technique. The application of geometric phase modulation technique to stellar interferometry has been proposed by Tango and Davis. Modulation of the geometric phase has the potential for improving the sensitivity of optical interferometers, and specially the Sydney University Stellar Interferometer (SUSI), by allowing broad band modulation of the light signals. This is because a modulator that changes the geometric phase of the signal is, in principle, achromatic. Another advantage of using such a phase modulator is that it can be placed in the common path traversed by the two orthogonally polarized beams emerging from the beam combiner in a stellar interferometer. Thus the optical components of the modulator do not have to be interferometric quality and could be relatively easily introduced into SUSI. We have investigated the proposed application in a laboratory-based experiment using a Mach-Zehnder interferometer with white-light source. This can be seen as a small model of an amplitude stellar interferometer where the light source takes the place of the distant star and two corner mirrors replaces the entrance pupils of the stellar interferometer

KNN BASED CLASSIFICATION OF DIGITAL MODULATED SIGNALS

Directory of Open Access Journals (Sweden)

Sajjad Ahmed Ghauri

2016-11-01

Full Text Available Demodulation process without the knowledge of modulation scheme requires Automatic Modulation Classification (AMC. When receiver has limited information about received signal then AMC become essential process. AMC finds important place in the field many civil and military fields such as modern electronic warfare, interfering source recognition, frequency management, link adaptation etc. In this paper we explore the use of K-nearest neighbor (KNN for modulation classification with different distance measurement methods. Five modulation schemes are used for classification purpose which is Binary Phase Shift Keying (BPSK, Quadrature Phase Shift Keying (QPSK, Quadrature Amplitude Modulation (QAM, 16-QAM and 64-QAM. Higher order cummulants (HOC are used as an input feature set to the classifier. Simulation results shows that proposed classification method provides better results for the considered modulation formats.

Elimination of residual amplitude modulation in tunable diode laser wavelength modulation spectroscopy using an optical fiber delay line.

Science.gov (United States)

Chakraborty, Arup Lal; Ruxton, Keith; Johnstone, Walter; Lengden, Michael; Duffin, Kevin

2009-06-08

A new fiber-optic technique to eliminate residual amplitude modulation in tunable diode laser wavelength modulation spectroscopy is presented. The modulated laser output is split to pass in parallel through the gas measurement cell and an optical fiber delay line, with the modulation frequency / delay chosen to introduce a relative phase shift of pi between them. The two signals are balanced using a variable attenuator and recombined through a fiber coupler. In the absence of gas, the direct laser intensity modulation cancels, thereby eliminating the high background. The presence of gas induces a concentration-dependent imbalance at the coupler's output from which the absolute absorption profile is directly recovered with high accuracy using 1f detection.

Reachability modules for the description logic SRIQ

CSIR Research Space (South Africa)

Nortje, R

2013-12-01

Full Text Available In this paper we investigate module extraction for the Description Logic SRIQ. We formulate modules in terms of the reachability problem for directed hypergraphs. Using inseperability relations, we investigate the module-theoretic properties...

Dosimetric analysis of testicular doses in prostate intensity-modulated and volumetric-modulated arc radiation therapy at different energy levels

Energy Technology Data Exchange (ETDEWEB)

Onal, Cem, E-mail: hcemonal@hotmail.com; Arslan, Gungor; Dolek, Yemliha; Efe, Esma

2016-01-01

The aim of this study is to evaluate the incidental testicular doses during prostate radiation therapy with intensity-modulated radiotherapy (IMRT) and volumetric-modulated arc radiotherapy (VMAT) at different energies. Dosimetric data of 15 patients with intermediate-risk prostate cancer who were treated with radiotherapy were analyzed. The prescribed dose was 78 Gy in 39 fractions. Dosimetric analysis compared testicular doses generated by 7-field intensity-modulated radiotherapy and volumetric-modulated arc radiotherapy with a single arc at 6, 10, and 15 MV energy levels. Testicular doses calculated from the treatment planning system and doses measured from the detectors were analyzed. Mean testicular doses from the intensity-modulated radiotherapy and volumetric-modulated arc radiotherapy per fraction calculated in the treatment planning system were 16.3 ± 10.3 cGy vs 21.5 ± 11.2 cGy (p = 0.03) at 6 MV, 13.4 ± 10.4 cGy vs 17.8 ± 10.7 cGy (p = 0.04) at 10 MV, and 10.6 ± 8.5 cGy vs 14.5 ± 8.6 cGy (p = 0.03) at 15 MV, respectively. Mean scattered testicular doses in the phantom measurements were 99.5 ± 17.2 cGy, 118.7 ± 16.4 cGy, and 193.9 ± 14.5 cGy at 6, 10, and 15 MV, respectively, in the intensity-modulated radiotherapy plans. In the volumetric-modulated arc radiotherapy plans, corresponding testicular doses per course were 90.4 ± 16.3 cGy, 103.6 ± 16.4 cGy, and 139.3 ± 14.6 cGy at 6, 10, and 15 MV, respectively. In conclusions, this study was the first to measure the incidental testicular doses by intensity-modulated radiotherapy and volumetric-modulated arc radiotherapy plans at different energy levels during prostate-only irradiation. Higher photon energy and volumetric-modulated arc radiotherapy plans resulted in higher incidental testicular doses compared with lower photon energy and intensity-modulated radiotherapy plans.

hybrid modulation scheme fo rid modulation scheme fo dulation

African Journals Online (AJOL)

eobe

control technique is done through simulations and ex control technique .... HYBRID MODULATION SCHEME FOR CASCADED H-BRIDGE INVERTER CELLS. C. I. Odeh ..... and OR operations. Referring to ... MATLAB/SIMULINK environment.

Sensory modulation disorders in childhood epilepsy.

Science.gov (United States)

van Campen, Jolien S; Jansen, Floor E; Kleinrensink, Nienke J; Joëls, Marian; Braun, Kees Pj; Bruining, Hilgo

2015-01-01

Altered sensory sensitivity is generally linked to seizure-susceptibility in childhood epilepsy but may also be associated to the highly prevalent problems in behavioral adaptation. This association is further suggested by the frequent overlap of childhood epilepsy with autism spectrum disorder (ASD) and attention deficit hyperactivity disorder (ADHD), conditions in which altered behavioral responses to sensory stimuli have been firmly established. A continuum of sensory processing defects due to imbalanced neuronal inhibition and excitation across these disorders has been hypothesizedthat may lead to common symptoms of inadequate modulation of behavioral responses to sensory stimuli. Here, we investigated the prevalence of sensory modulation disorders among children with epilepsy and their relation with symptomatology of neurodevelopmental disorders. We used the Sensory Profile questionnaire to assess behavioral responses to sensory stimuli and categorize sensory modulation disorders in children with active epilepsy (aged 4-17 years). We related these outcomes to epilepsy characteristics and tested their association with comorbid symptoms of ASD (Social Responsiveness Scale) and ADHD (Strengths and Difficulties Questionnaire). Sensory modulation disorders were reported in 49 % of the 158 children. Children with epilepsy reported increased behavioral responses associated with sensory "sensitivity," "sensory avoidance," and "poor registration" but not "sensory seeking." Comorbidity of ASD and ADHD was associated with more severe sensory modulation problems, although 27 % of typically developing children with epilepsy also reported a sensory modulation disorder. Sensory modulation disorders are an under-recognized problem in children with epilepsy. The extent of the modulation difficulties indicates a substantial burden on daily functioning and may explain an important part of the behavioral distress associated with childhood epilepsy.

Mediator kinase module and human tumorigenesis.

Science.gov (United States)

Clark, Alison D; Oldenbroek, Marieke; Boyer, Thomas G

2015-01-01

Mediator is a conserved multi-subunit signal processor through which regulatory informatiosn conveyed by gene-specific transcription factors is transduced to RNA Polymerase II (Pol II). In humans, MED13, MED12, CDK8 and Cyclin C (CycC) comprise a four-subunit "kinase" module that exists in variable association with a 26-subunit Mediator core. Genetic and biochemical studies have established the Mediator kinase module as a major ingress of developmental and oncogenic signaling through Mediator, and much of its function in signal-dependent gene regulation derives from its resident CDK8 kinase activity. For example, CDK8-targeted substrate phosphorylation impacts transcription factor half-life, Pol II activity and chromatin chemistry and functional status. Recent structural and biochemical studies have revealed a precise network of physical and functional subunit interactions required for proper kinase module activity. Accordingly, pathologic change in this activity through altered expression or mutation of constituent kinase module subunits can have profound consequences for altered signaling and tumor formation. Herein, we review the structural organization, biological function and oncogenic potential of the Mediator kinase module. We focus principally on tumor-associated alterations in kinase module subunits for which mechanistic relationships as opposed to strictly correlative associations are established. These considerations point to an emerging picture of the Mediator kinase module as an oncogenic unit, one in which pathogenic activation/deactivation through component change drives tumor formation through perturbation of signal-dependent gene regulation. It follows that therapeutic strategies to combat CDK8-driven tumors will involve targeted modulation of CDK8 activity or pharmacologic manipulation of dysregulated CDK8-dependent signaling pathways.

Programmable synchronous communications module

International Nuclear Information System (INIS)

Horelick, D.

1979-10-01

The functional characteristics of a programmable, synchronous serial communications CAMAC module with buffering in block format are described. Both bit and byte oriented protocols can be handled in full duplex depending on the program implemented. The main elements of the module are a Signetics 2652 Multi-Protocol Communications Controller, a Zilog Z-808 8 bit microprocessor with PROM and RAM, and FIFOs for buffering

Klystron Gun Arcing and Modulator Protection

International Nuclear Information System (INIS)

Gold, S

2004-01-01

The demand for 500 kV and 265 amperes peak to power an X-Band klystron brings up protection issues for klystron faults and the energy dumped into the arc from the modulator. This situation is made worse when more than one klystron will be driven from a single modulator, such as the existing schemes for running two and eight klystrons. High power pulsed klystrons have traditionally be powered by line type modulators which match the driving impedance with the load impedance and therefore current limit at twice the operating current. Multiple klystrons have the added problems of a lower modulator source impedance and added stray capacitance, which converts into appreciable energy at high voltages like 500kV. SLAC has measured the energy dumped into klystron arcs in a single and dual klystron configuration at the 400 to 450 kV level and found interesting characteristics in the arc formation. The author will present measured data from klystron arcs powered from line-type modulators in several configurations. The questions arise as to how the newly designed solid-state modulators, running multiple tubes, will react to a klystron arc and how much energy will be dumped into the arc

Therapeutic Basis of Clinical Pain Modulation

Science.gov (United States)

Kirkpatrick, Daniel R.; McEntire, Dan M.; Hambsch, Zakary J.; Kerfeld, Mitchell J.; Smith, Tyler A.; Reisbig, Mark D.; Youngblood, Charles F.

2015-01-01

Abstract Pain is a hallmark of almost all bodily ailments and can be modulated by agents, including analgesics and anesthetics that suppress pain signals in the central nervous system. Defects in the modulatory systems, including the endogenous pain‐inhibitory pathways, are a major factor in the initiation and chronicity of pain. Thus, pain modulation is particularly applicable to the practice of medicine. This review summarizes the existing literature on pain modulation. Here, we critically reviewed the literature from PubMed on pain modulation published primarily within the past 5 years in high impact journals. Specifically, we have discussed important anatomical landmarks of pain modulation and outlined the endogenous networks and underlying mechanisms of clinically relevant pain modulatory methods. The Gate Control Theory is briefly presented with discussion on the capacity of pain modulation to cause both hyper‐ and hypoalgesia. An emphasis has been given to highlight key areas in pain research that, because of unanswered questions or therapeutic potential, merit additional scientific scrutiny. The information presented in this paper would be helpful in developing novel therapies, metrics, and interventions for improved patient management. PMID:25962969

Cascaded Amplitude Modulations in Sound Texture Perception

Directory of Open Access Journals (Sweden)

Richard McWalter

2017-09-01

Full Text Available Sound textures, such as crackling fire or chirping crickets, represent a broad class of sounds defined by their homogeneous temporal structure. It has been suggested that the perception of texture is mediated by time-averaged summary statistics measured from early auditory representations. In this study, we investigated the perception of sound textures that contain rhythmic structure, specifically second-order amplitude modulations that arise from the interaction of different modulation rates, previously described as “beating” in the envelope-frequency domain. We developed an auditory texture model that utilizes a cascade of modulation filterbanks that capture the structure of simple rhythmic patterns. The model was examined in a series of psychophysical listening experiments using synthetic sound textures—stimuli generated using time-averaged statistics measured from real-world textures. In a texture identification task, our results indicated that second-order amplitude modulation sensitivity enhanced recognition. Next, we examined the contribution of the second-order modulation analysis in a preference task, where the proposed auditory texture model was preferred over a range of model deviants that lacked second-order modulation rate sensitivity. Lastly, the discriminability of textures that included second-order amplitude modulations appeared to be perceived using a time-averaging process. Overall, our results demonstrate that the inclusion of second-order modulation analysis generates improvements in the perceived quality of synthetic textures compared to the first-order modulation analysis considered in previous approaches.

X-(2) Modulator With 40-GHz Modulation Utilizing BaTiO3 Photonic Crystal Waveguides

DEFF Research Database (Denmark)

Girouard, Peter David; Chen, Pice; Jeong, Young Kyu

2017-01-01

Future telecommunication and data center networks as well as quantum optical communication systems will require optical modulators with wide bandwidths, large extinction, low operating voltage, and small size. We report the first quantitative demonstration of slow light enhancement of the electro......-optic (EO) coefficient in a.(2) ferroelectric waveguide at microwave modulation frequencies. This is demonstrated in a compact (1 mm) photonic crystal (PC) device with a voltage-length product (V pi . L) of 0.66 V-cm at 10 GHz and measured EO modulation out to 40 GHz. A local enhancement factor of 12...

Dense module enumeration in biological networks

Science.gov (United States)

Tsuda, Koji; Georgii, Elisabeth

2009-12-01

Analysis of large networks is a central topic in various research fields including biology, sociology, and web mining. Detection of dense modules (a.k.a. clusters) is an important step to analyze the networks. Though numerous methods have been proposed to this aim, they often lack mathematical rigorousness. Namely, there is no guarantee that all dense modules are detected. Here, we present a novel reverse-search-based method for enumerating all dense modules. Furthermore, constraints from additional data sources such as gene expression profiles or customer profiles can be integrated, so that we can systematically detect dense modules with interesting profiles. We report successful applications in human protein interaction network analyses.

Dense module enumeration in biological networks

International Nuclear Information System (INIS)

Tsuda, Koji; Georgii, Elisabeth

2009-01-01

Analysis of large networks is a central topic in various research fields including biology, sociology, and web mining. Detection of dense modules (a.k.a. clusters) is an important step to analyze the networks. Though numerous methods have been proposed to this aim, they often lack mathematical rigorousness. Namely, there is no guarantee that all dense modules are detected. Here, we present a novel reverse-search-based method for enumerating all dense modules. Furthermore, constraints from additional data sources such as gene expression profiles or customer profiles can be integrated, so that we can systematically detect dense modules with interesting profiles. We report successful applications in human protein interaction network analyses.

Standard Chinese: A Modular Approach. Student Workbook. Module 1: Orientation; Module 2: Biographic Information.

Science.gov (United States)

Defense Language Inst., Monterey, CA.

Texts in spoken Standard Chinese were developed to improve and update Chinese materials to reflect current usage in Beijing and Taipei. The focus is on communicating in Chinese in practical situations. The overall course is organized into 10 modules, student workbooks, and resource modules. This workbook covers the orientation and biographic…

Hemispherical power asymmetry from scale-dependent modulated reheating

International Nuclear Information System (INIS)

McDonald, John

2013-01-01

We propose a new model for the hemispherical power asymmetry of the CMB based on modulated reheating. Non-Gaussianity from modulated reheating can be small enough to satisfy the bound from Planck if the dominant modulation of the inflaton decay rate is linear in the modulating field σ. σ must then acquire a spatially-modulated power spectrum with a red scale-dependence. This can be achieved if the primordial perturbation of σ is generated via tachyonic growth of a complex scalar field. Modulated reheating due to σ then produces a spatially modulated and scale-dependent sub-dominant contribution to the adiabatic density perturbation. We show that it is possible to account for the observed asymmetry while remaining consistent with bounds from quasar number counts, non-Gaussianity and the CMB temperature quadupole. The model predicts that the adiabatic perturbation spectral index and its running will be modified by the modulated reheating component

Module-Integrated Power Converters Based on Universal Dock

Energy Technology Data Exchange (ETDEWEB)

Chapman, Patrick; Rodriguez, Fernando

2015-03-13

Solar power installations using alternating current photovoltaic (ACPV) modules have significant cost and performance advantages over systems using conventional solar modules and string inverters. ACPV modules have improved energy harvest due to module-level power point tracking and redundancy. More importantly, ACPV modules are easier and cheaper to install, lowering the total installed cost, indirect costs, and barriers to market entry. Furthermore, ACPV modules have communications and data logging capability, yielding module-level telemetry data that is useful in site diagnostics and other data applications. The products of these efforts were threefold. First, an advanced microinverter power topology was developed, modeled, simulated, and tested. Second, new microinverter enclosure concepts were developed and tested. Third, a new ACPV module prototype was constructed, combining the power topology and the enclosure concepts. SolarBridge filed for patents in each of these areas and is transitioning the project from a concept phase to full development.

Bactericidal effectiveness of modulated UV light

International Nuclear Information System (INIS)

Bank, H.L.; John, J.; Schmehl, M.K.; Dratch, R.J.

1990-01-01

Studies were designed to evaluate the effectiveness of pulsed modulated UV light waveforms for killing bacteria. Exposure of five strains of bacteria to the modulated information encoded in the light decreased the colony population from a confluent lawn to less than 20 colonies. However, approximately 2,000 colonies survived treatment with the same intensity and time of exposure to UV light lacking the modulated information

Modulation Algorithms for Manipulating Nuclear Spin States

OpenAIRE

Liu, Boyang; Zhang, Ming; Dai, Hong-Yi

2013-01-01

We exploit the impact of exact frequency modulation on transition time of steering nuclear spin states from theoretical point of view. 1-stage and 2-stage Frequency-Amplitude-Phase modulation (FAPM) algorithms are proposed in contrast with 1-stage and 3-stage Amplitude-Phase modulation (APM) algorithms. The sufficient conditions are further present for transiting nuclear spin states within the specified time by these four modulation algorithms. It is demonstrated that transition time performa...

Adolescence Education: Physical Aspect, Module One; Social Aspects, Module Two; Sex Roles, Module Three; Sexually Transmitted Diseases, Module Four.

Science.gov (United States)

United Nations Educational, Scientific and Cultural Organization, Bangkok (Thailand). Principal Regional Office for Asia and the Pacific.

Adolescence Education is a family life education training program designed to assist young people in their physical, social, emotional, and moral development as they prepare for adulthood, marriage, parenthood, aging, and social relationships in the context of family and society. This package consists of four individually bound modules: (1)…

Optical modulation in silicon-vanadium dioxide photonic structures

Science.gov (United States)

Miller, Kevin J.; Hallman, Kent A.; Haglund, Richard F.; Weiss, Sharon M.

2017-08-01

All-optical modulators are likely to play an important role in future chip-scale information processing systems. In this work, through simulations, we investigate the potential of a recently reported vanadium dioxide (VO2) embedded silicon waveguide structure for ultrafast all-optical signal modulation. With a VO2 length of only 200 nm, finite-differencetime- domain simulations suggest broadband (200 nm) operation with a modulation greater than 12 dB and an insertion loss of less than 3 dB. Predicted performance metrics, including modulation speed, modulation depth, optical bandwidth, insertion loss, device footprint, and energy consumption of the proposed Si-VO2 all-optical modulator are benchmarked against those of current state-of-the-art all-optical modulators with in-plane optical excitation.

Extending double modulation: combinatorial rules for identifying the modulations necessary for determining elasticities in metabolic pathways.

Science.gov (United States)

Giersch, C; Cornish-Bowden, A

1996-10-07

The double modulation method for determining the elasticities of pathway enzymes, originally devised by Kacser & Burns (Biochem. Soc. Trans. 7, 1149-1160, 1979), is extended to pathways of complex topological structure, including branching and feedback loops. An explicit system of linear equations for the unknown elasticities is derived. The constraints imposed on this linear system imply that modulations of more than one enzyme are not necessarily independent. Simple combinatorial rules are described for identifying without using any algebra the set of independent modulations that allow the determination of the elasticities of any enzyme. By repeated application, the minimum numbers of modulations required to determine the elasticities of all enzymes of a given pathway can be determined. The procedure is illustrated with numerous examples.

Standard Chinese: A Modular Approach. Student Text. Module 1: Orientation; Module 2: Biographic Information.

Science.gov (United States)

Defense Language Inst., Monterey, CA.

Texts in spoken Standard Chinese were developed to improve and update Chinese materials to reflect current usage in Beijing and Taipei. The focus is on communicating in Chinese in practical situations, and the texts summarize and supplement tapes. The overall course is organized into 10 situational modules, student workbooks, and resource modules.…

Microfiltration of soy sauce sediment with rotating disk membrane module; Kaitengata enbanmaku module ni yoru shoyuori no roka

Energy Technology Data Exchange (ETDEWEB)

Matsushita, K.; Kanekuni, N.; Nogaki, H.; Itakura, I.; Shimizu, Y.; Watanabe, A. [TOTO Ltd., Kitakyushu (Japan)

1995-01-15

Soy sauce sediment is formed in pasteurization of raw soy sauce. It is treated as industrial waste, though its main component is soy sauce, because of difficulty in perfect clarification of the suspension. In this paper, we decided a suitable range of pore size of microfiltration and a cut-off level of ultrafiltration to clarify soy sauce sediment and we developed a rotating disk membrane module (RD Module) and compared performance with conventional a multi-tubular membrane module (MT Module). The optimum range to obtain soy sauce of quality was less than a pore size of O.2{mu}m for microfiltration, while ultrafiltration was not suitable for soy sauce sediment. Ultrafiltration was restricted by rejection of colors and nucleic acids and related compounds in soy sauce sediment, rather than rejection of bacteria and ethanol. An RD Module could recover soy sauce of quality and was superior to an MT Module for concentration ratio, but the permeate fluxes of the RD Module decreased under conditions of high revolution as centrifugal forces were exerted on the permeate in the disk membrane. The power consumption of the RD Module was proportional to the cube of number of revolutions and to the fifth power of the radius, so it was found that one of methods for the scale up is to increase the number of disk membranes than increase the radius. 15 refs., 8 figs., 1 tab.

Photovoltaic module with adhesion promoter

Science.gov (United States)

Xavier, Grace

2013-10-08

Photovoltaic modules with adhesion promoters and methods for fabricating photovoltaic modules with adhesion promoters are described. A photovoltaic module includes a solar cell including a first surface and a second surface, the second surface including a plurality of interspaced back-side contacts. A first glass layer is coupled to the first surface by a first encapsulating layer. A second glass layer is coupled to the second surface by a second encapsulating layer. At least a portion of the second encapsulating layer is bonded directly to the plurality of interspaced back-side contacts by an adhesion promoter.

Complex Wavelet Based Modulation Analysis

DEFF Research Database (Denmark)

Luneau, Jean-Marc; Lebrun, Jérôme; Jensen, Søren Holdt

2008-01-01

Low-frequency modulation of sound carry important information for speech and music. The modulation spectrum i commonly obtained by spectral analysis of the sole temporal envelopes of the sub-bands out of a time-frequency analysis. Processing in this domain usually creates undesirable distortions...... polynomial trends. Moreover an analytic Hilbert-like transform is possible with complex wavelets implemented as an orthogonal filter bank. By working in an alternative transform domain coined as “Modulation Subbands”, this transform shows very promising denoising capabilities and suggests new approaches for joint...

Induced modules over group algebras

CERN Document Server

Karpilovsky, Gregory

1990-01-01

In 1898 Frobenius discovered a construction which, in present terminology, associates with every module of a subgroup the induced module of a group. This construction proved to be of fundamental importance and is one of the basic tools in the entire theory of group representations.This monograph is designed for research mathematicians and advanced graduate students and gives a picture of the general theory of induced modules as it exists at present. Much of the material has until now been available only in research articles. The approach is not intended to be encyclopedic, rather each topic is

Photovoltaic module parameters acquisition model

Energy Technology Data Exchange (ETDEWEB)

Cibira, Gabriel, E-mail: cibira@lm.uniza.sk; Koščová, Marcela, E-mail: mkoscova@lm.uniza.sk

2014-09-01

Highlights: • Photovoltaic five-parameter model is proposed using Matlab{sup ®} and Simulink. • The model acquisits input sparse data matrix from stigmatic measurement. • Computer simulations lead to continuous I–V and P–V characteristics. • Extrapolated I–V and P–V characteristics are in hand. • The model allows us to predict photovoltaics exploitation in different conditions. - Abstract: This paper presents basic procedures for photovoltaic (PV) module parameters acquisition using MATLAB and Simulink modelling. In first step, MATLAB and Simulink theoretical model are set to calculate I–V and P–V characteristics for PV module based on equivalent electrical circuit. Then, limited I–V data string is obtained from examined PV module using standard measurement equipment at standard irradiation and temperature conditions and stated into MATLAB data matrix as a reference model. Next, the theoretical model is optimized to keep-up with the reference model and to learn its basic parameters relations, over sparse data matrix. Finally, PV module parameters are deliverable for acquisition at different realistic irradiation, temperature conditions as well as series resistance. Besides of output power characteristics and efficiency calculation for PV module or system, proposed model validates computing statistical deviation compared to reference model.

Photovoltaic module parameters acquisition model

International Nuclear Information System (INIS)

Cibira, Gabriel; Koščová, Marcela

2014-01-01

Highlights: • Photovoltaic five-parameter model is proposed using Matlab ® and Simulink. • The model acquisits input sparse data matrix from stigmatic measurement. • Computer simulations lead to continuous I–V and P–V characteristics. • Extrapolated I–V and P–V characteristics are in hand. • The model allows us to predict photovoltaics exploitation in different conditions. - Abstract: This paper presents basic procedures for photovoltaic (PV) module parameters acquisition using MATLAB and Simulink modelling. In first step, MATLAB and Simulink theoretical model are set to calculate I–V and P–V characteristics for PV module based on equivalent electrical circuit. Then, limited I–V data string is obtained from examined PV module using standard measurement equipment at standard irradiation and temperature conditions and stated into MATLAB data matrix as a reference model. Next, the theoretical model is optimized to keep-up with the reference model and to learn its basic parameters relations, over sparse data matrix. Finally, PV module parameters are deliverable for acquisition at different realistic irradiation, temperature conditions as well as series resistance. Besides of output power characteristics and efficiency calculation for PV module or system, proposed model validates computing statistical deviation compared to reference model

Characteristics of spectro-temporal modulation frequency selectivity in humans.

Science.gov (United States)

Oetjen, Arne; Verhey, Jesko L

2017-03-01

There is increasing evidence that the auditory system shows frequency selectivity for spectro-temporal modulations. A recent study of the authors has shown spectro-temporal modulation masking patterns that were in agreement with the hypothesis of spectro-temporal modulation filters in the human auditory system [Oetjen and Verhey (2015). J. Acoust. Soc. Am. 137(2), 714-723]. In the present study, that experimental data and additional data were used to model this spectro-temporal frequency selectivity. The additional data were collected to investigate to what extent the spectro-temporal modulation-frequency selectivity results from a combination of a purely temporal amplitude-modulation filter and a purely spectral amplitude-modulation filter. In contrast to the previous study, thresholds were measured for masker and target modulations with opposite directions, i.e., an upward pointing target modulation and a downward pointing masker modulation. The comparison of this data set with previous corresponding data with the same direction from target and masker modulations indicate that a specific spectro-temporal modulation filter is required to simulate all aspects of spectro-temporal modulation frequency selectivity. A model using a modified Gabor filter with a purely temporal and a purely spectral filter predicts the spectro-temporal modulation masking data.

ULF Generation by Modulated Ionospheric Heating

Science.gov (United States)

Chang, C.; Labenski, J.; Wallace, T.; Papadopoulos, K.

2013-12-01

Modulated ionospheric heating experiments designed to generate ULF waves using the HAARP heater have been conducted since 2007. Artificial ULF waves in the Pc1 frequency range were observed from space and by ground induction magnetometers located in the vicinity of the heater as well as at long distances. Two distinct generation mechanisms of artificial ULF waves were identified. The first was electroject modulation under geomagnetically disturbed conditions. The second was pressure modulation in the E and F regions of the ionosphere under quiet conditions. Ground detections of ULF waves near the heater included both Shear Alfven waves and Magnetosonic waves generated by electrojet and/or pressure modulations. Distant ULF detections involved Magnetosonic wave propagation in the Alfvenic duct with pressure modulation as the most likely source. Summary of our observations and theoretical interpretations will be presented at the meeting. We would like to acknowledge the support provided by the staff at the HAARP facility during our ULF experiments.

Polybinary modulation for bandwidth limited optical links

DEFF Research Database (Denmark)

Vegas Olmos, Juan José; Jurado-Navas, Antonio

2015-01-01

form of partial response modulation, employs simple codification and filtering at the transmitter to drastically increase the spectral efficiency. At the receiver side, poly binary modulation requires low complexity direct detection and very little digital signal processing. This talk will review...... the recent results on poly binary modulation, comprising both binary and multilevel signals as seed signals. The results will show how poly binary modulation effectively reduces the bandwidth requirements on optical links while providing high spectral efficiency....

Vertically mounted bifacial photovoltaic modules: A global analysis

International Nuclear Information System (INIS)

Guo, Siyu; Walsh, Timothy Michael; Peters, Marius

2013-01-01

Bifacial PV (photovoltaic) modules have recently come to increasing attention and various system designs have been investigated. In this paper, a global comparison is made between vertically mounted bifacial modules facing East–West and conventionally mounted mono-facial modules. An analytical method is used to calculate the radiation received by these two module configurations. It is found that the answer to the question which of these two module configurations performs better strongly depends on three factors: (i) the latitude, (ii) the local diffuse fraction and (iii) the albedo. In a subsequent part of the paper, the minimum albedo required to result in a better performance for vertically mounted bifacial modules is calculated for every place in the world. The calculation is based on measured data of the diffuse light fraction and the results are shown in the form of a global map. Finally, the albedo requirements are compared with the measured global albedo distribution. The calculation allows a distinct decision which module configuration is more suitable for a certain place in the world. The result is also shown as a map defining the corresponding areas. - Highlights: • Vertically mounted bifacial module and conventionally monofacial module are compared. • The key factors affecting the performance of the two configurations are investigated. • Which module configuration is more suitable for each place is shown in a world map. • The minimum albedo for bifacial modules to have a better performance is calculated

Power module assemblies with staggered coolant channels

Science.gov (United States)

Herron, Nicholas Hayden; Mann, Brooks S; Korich, Mark D

2013-07-16

A manifold is provided for supporting a power module assembly with a plurality of power modules. The manifold includes a first manifold section. The first face of the first manifold section is configured to receive the first power module, and the second face of the first manifold section defines a first cavity with a first baseplate thermally coupled to the first power module. The first face of the second manifold section is configured to receive the second power module, and the second face of the second manifold section defines a second cavity with a second baseplate thermally coupled to the second power module. The second face of the first manifold section and the second face of the second manifold section are coupled together such that the first cavity and the second cavity form a coolant channel. The first cavity is at least partially staggered with respect to second cavity.

Self oscillating PWM modulators, a topological comparison

DEFF Research Database (Denmark)

Poulsen, Søren; Andersen, Michael Andreas E.

2004-01-01

or fs/ð range respectively, where fs is the switching frequency of the converter. For some applications this will require unacceptable high switching frequency to achieve enough control loop bandwidth for the desired dynamic performance. With self oscillating modulators, the open loop bandwidth is equal...... to fs which makes this type of modulators an excellent choice for a wide range of applications. Self oscillating PWM modulators can be made in a number of ways, either as voltage or current mode modulators, and the self oscillating behavior can be achieved either by using hysteresis control...... or by shaping the open loop function of the modulator so its gain and phase response causes a closed loop natural oscillation. The two main types of self oscillating modulators have many similarities, but differences in dynamic performance and linearity are present. The work presented is related to the author...

Production chain of CMS pixel modules

CERN Multimedia

2006-01-01

The pictures show the production chain of pixel modules for the CMS detector. Fig.1: overview of the assembly procedure. Fig.2: bump bonding with ReadOut Chip (ROC) connected to the sensor. Fig.3: glueing a raw module onto the baseplate strips. Fig.4: glueing of the High Density Interconnect (HDI) onto a raw module. Fig.5: pull test after heat reflow. Fig.6: wafer sensor processing, Indium evaporation.

Rational orderliness of study course modules

Directory of Open Access Journals (Sweden)

A. S. Domnikov

2014-01-01

Full Text Available Modern electronic courses and textbooks are based, as a rule, on the separate educational modules, which are developed and tested in advance and intended for use in various educational situations. Numerous publications of domestic and foreign authors have discussed a task to form a module-based structure of study course. For its solution have been offered various methods of discrete mathematics, the theory of graphs, and artificial intelligence: semantic networks, ontologies, etc. The important problem that has been much less deeply studied is a rational orderliness of the study course modules.In the work this task is set as a problem to search the best linear approximation of the directed graph the tops of which are modules, while the arches are precedence relations between them. The directed graph is considered as a graphical representation of a binary precedence relation, which has been specified using a set of pairs of educational modules. This relation can be presented as a sum of two components of the symmetric and asymmetric sub-relations. The first sub-relation represents the tolerance relation, and the second one is preorder.To solve the task essentially various ways for processing these components must be used. If a sub-relation of the preorder can be transformed into serial structure, for tolerance any attempts of this kind are doomed to failure. Modules belonging to the relation of tolerance are expedient to merge in a separate educational component. The paper offers a mathematical model in which the problem of merging modules is formulated as a problem of discrete mathematical programming.The paper considers the structure of educational modules formed by hypertext references. It is shown that search of the best linear approximation of such structure is reduced to a classical task about the smallest covering in matrix statement.

Environment Modules on the Peregrine System | High-Performance Computing |

Science.gov (United States)

NREL Environment Modules on the Peregrine System Environment Modules on the Peregrine System Peregrine uses environment modules to easily manage software environments. Environment modules facilitate modules commands set up a basic environment for the default compilers, tools and libraries, such as the

Characterization and Diagnostics for Photovoltaic Modules and Arrays

DEFF Research Database (Denmark)

Spataru, Sergiu

part of this work were developed based on two well-known module characterization techniques, namely current-voltage (I-V) characterization, and electroluminescence imaging. he I-V based module diagnostic methods were developed by combining the strengths of light I-V and dark I-V characterization......, characterization and diagnostic methods are increasingly important in identifying and understanding the failures and degradation modes affecting PV modules and arrays, as well as developing relevant tools and tests for assessing the reliability and lifetime of PV modules. This thesis investigates diagnostic...... methods for characterizing and detecting degradation modes in crystalline silicon photovoltaic modules and arrays, and is structured into two parts. The first part of this work is focused on developing PV module characterization and diagnostic methods for use in module diagnostics and failure...

Plasmonic solutions for coupling and modulation

DEFF Research Database (Denmark)

Andryieuski, Andrei; Babicheva, Viktoriia; Malureanu, Radu

We present our design results for efficient coupling and modulation in plasmonic structures. Fiber coupling to a plasmonic slot waveguide is significantly increased by a metallic nanoantenna with additional reflectors or by the configuration of several connected antennas. We also show that the pl......We present our design results for efficient coupling and modulation in plasmonic structures. Fiber coupling to a plasmonic slot waveguide is significantly increased by a metallic nanoantenna with additional reflectors or by the configuration of several connected antennas. We also show...... that the plasmonic four-layer waveguide with patterned ITO layer can modulate light with higher transmission and the same modulation depth as a waveguide with a uniform ITO layer....

Fan-out module for TANSY-KM5

International Nuclear Information System (INIS)

Rydz, R.; Norberg, L.; Urholm, L.; Grosshoeg, G.

1991-01-01

The FAN-out module is a driver module for three time-to-digital units and one multiscaler unit. The 16 input signals come from the Ortec CO 1600 coincidence unit. Diagrams of the circuits and a component list for the module are given here

Coherent states on Hilbert modules

International Nuclear Information System (INIS)

Ali, S Twareque; Bhattacharyya, T; Roy, S S

2011-01-01

We generalize the concept of coherent states, traditionally defined as special families of vectors on Hilbert spaces, to Hilbert modules. We show that Hilbert modules over C*-algebras are the natural settings for a generalization of coherent states defined on Hilbert spaces. We consider those Hilbert C*-modules which have a natural left action from another C*-algebra, say A. The coherent states are well defined in this case and they behave well with respect to the left action by A. Certain classical objects like the Cuntz algebra are related to specific examples of coherent states. Finally we show that coherent states on modules give rise to a completely positive definite kernel between two C*-algebras, in complete analogy to the Hilbert space situation. Related to this, there is a dilation result for positive operator-valued measures, in the sense of Naimark. A number of examples are worked out to illustrate the theory. Some possible physical applications are also mentioned.

An Embedded Reconfigurable Logic Module

Science.gov (United States)

Tucker, Jerry H.; Klenke, Robert H.; Shams, Qamar A. (Technical Monitor)

2002-01-01

A Miniature Embedded Reconfigurable Computer and Logic (MERCAL) module has been developed and verified. MERCAL was designed to be a general-purpose, universal module that that can provide significant hardware and software resources to meet the requirements of many of today's complex embedded applications. This is accomplished in the MERCAL module by combining a sub credit card size PC in a DIMM form factor with a XILINX Spartan I1 FPGA. The PC has the ability to download program files to the FPGA to configure it for different hardware functions and to transfer data to and from the FPGA via the PC's ISA bus during run time. The MERCAL module combines, in a compact package, the computational power of a 133 MHz PC with up to 150,000 gate equivalents of digital logic that can be reconfigured by software. The general architecture and functionality of the MERCAL hardware and system software are described.

Improvement of Shade Resilience in Photovoltaic Modules Using Buck Converters in a Smart Module Architecture

NARCIS (Netherlands)

Golroodbari, S. Mirbagheri; Waal, Arjen. de; Sark, Wilfried van

2018-01-01

Partial shading has a nonlinear effect on the performance of photovoltaic (PV) modules. Different methods of optimizing energy harvesting under partial shading conditions have been suggested to mitigate this issue. In this paper, a smart PV module architecture is proposed for improvement of shade

V123 Beam Synchronous Encoder Module

International Nuclear Information System (INIS)

Kerner, T.; Conkling, C. R.; Oerter, B.

1999-01-01

The V123 Synchronous Encoder Module transmits events to distributed trigger modules and embedded decoders around the RHIC rings where they are used to provide beam instrumentation triggers [1,2,3]. The RHIC beam synchronous event link hardware is mainly comprised of three VMEbus board designs, the central input modules (V201), and encoder modules (V123), and the distributed trigger modules (V124). Two beam synchronous links, one for each ring, are distributed via fiberoptic and fanned out via twisted wire pair cables. The V123 synchronizes with the RF system clock derived from the beam bucket frequency and a revolution fiducial pulse. The RF system clock is used to create the beam synchronous event link carrier and events are synchronized with the rotation fiducial. A low jitter RF clock is later recovered from this carrier by phase lock loops in the trigger modules. Prioritized hardware and software triggers fill up to 15 beam event code transmission slots per revolution while tracking the ramping RF acceleration frequency and storage frequency. The revolution fiducial event is always the first event transmitted which is used to synchronize the firing of the abort kicker and to locate the first bucket for decoders distributed about the ring

Price/efficiency correlations for 2004 photovoltaic modules

International Nuclear Information System (INIS)

Green, Martin A.

2005-01-01

The claim is often made that efficiency is a key factor in determining the marketability of photovoltaic products. If this is the case, a strong correlation between the price of modules and their efficiency might be expected. This relationship is investigated using module pricing data that have recently become available. Conclusions are that there is little correlation between module price and efficiency in this data set and that some thin-film modules currently appear to attract a pricing premium. (Author)

Automatic modulation classification principles, algorithms and applications

CERN Document Server

Zhu, Zhechen

2014-01-01

Automatic Modulation Classification (AMC) has been a key technology in many military, security, and civilian telecommunication applications for decades. In military and security applications, modulation often serves as another level of encryption; in modern civilian applications, multiple modulation types can be employed by a signal transmitter to control the data rate and link reliability. This book offers comprehensive documentation of AMC models, algorithms and implementations for successful modulation recognition. It provides an invaluable theoretical and numerical comparison of AMC algo

Banach frames for multivariate alpha-modulation spaces

DEFF Research Database (Denmark)

Borup, Lasse; Nielsen, Morten

2006-01-01

The α-modulation spaces [$Mathematical Term$], form a family of spaces that include the Besov and modulation spaces as special cases. This paper is concerned with construction of Banach frames for α-modulation spaces in the multivariate setting. The frames constructed are unions of independent Ri...... Riesz sequences based on tensor products of univariate brushlet functions, which simplifies the analysis of the full frame. We show that the multivariate α-modulation spaces can be completely characterized by the Banach frames constructed....

Spring-cleaning at the solar module; Fruehjahrsputz am Modul

Energy Technology Data Exchange (ETDEWEB)

Orben, Steffen [Orben Wasseraufbereitung, Wiesbaden (Germany)

2013-04-15

The solar power yield of a photovoltaic power plant can be reduced significantly by a natural pollution. The average loss in performance and yield at mild and moderate surface contaminations is between eight and sixteen percent. The self-cleaning effect due to wind, rain and snow is not sufficient in order to purify the solar panels. In contrast, the purification with desalinated water receives the performance of solar generators and ensures the yields. Desalinated water can be produced from tap water by reverse osmosis and ion exchange. The water consumption amounts ten liters for a performance of one kilowatt of the solar module. Other important factors are 0.23 Euro for a filter cartridge as well as 11.50 Euro for personnel costs for a performance of one kilowatt of the solar module.

Unstart Coupling Mechanism Analysis of Multiple-Modules Hypersonic Inlet

Directory of Open Access Journals (Sweden)

Jichao Hu

2013-01-01

Full Text Available The combination of multiplemodules in parallel manner is an important way to achieve the much higher thrust of scramjet engine. For the multiple-modules scramjet engine, when inlet unstarted oscillatory flow appears in a single-module engine due to high backpressure, how to interact with each module by massflow spillage, and whether inlet unstart occurs in other modules are important issues. The unstarted flowfield and coupling characteristic for a three-module hypersonic inlet caused by center module II and side module III were, conducted respectively. The results indicate that the other two hypersonic inlets are forced into unstarted flow when unstarted phenomenon appears on a single-module hypersonic inlet due to high backpressure, and the reversed flow in the isolator dominates the formation, expansion, shrinkage, and disappearance of the vortexes, and thus, it is the major factor of unstart coupling of multiple-modules hypersonic inlet. The coupling effect among multiple modules makes hypersonic inlet be more likely unstarted.

Unstart coupling mechanism analysis of multiple-modules hypersonic inlet.

Science.gov (United States)

Hu, Jichao; Chang, Juntao; Wang, Lei; Cao, Shibin; Bao, Wen

2013-01-01

The combination of multiplemodules in parallel manner is an important way to achieve the much higher thrust of scramjet engine. For the multiple-modules scramjet engine, when inlet unstarted oscillatory flow appears in a single-module engine due to high backpressure, how to interact with each module by massflow spillage, and whether inlet unstart occurs in other modules are important issues. The unstarted flowfield and coupling characteristic for a three-module hypersonic inlet caused by center module II and side module III were, conducted respectively. The results indicate that the other two hypersonic inlets are forced into unstarted flow when unstarted phenomenon appears on a single-module hypersonic inlet due to high backpressure, and the reversed flow in the isolator dominates the formation, expansion, shrinkage, and disappearance of the vortexes, and thus, it is the major factor of unstart coupling of multiple-modules hypersonic inlet. The coupling effect among multiple modules makes hypersonic inlet be more likely unstarted.

Open-Loop Wide-Bandwidth Phase Modulation Techniques

Directory of Open Access Journals (Sweden)

Nitin Nidhi

2011-01-01

Full Text Available The ever-increasing growth in the bandwidth of wireless communication channels requires the transmitter to be wide-bandwidth and power-efficient. Polar and outphasing transmitter topologies are two promising candidates for such applications, in future. Both these architectures require a wide-bandwidth phase modulator. Open-loop phase modulation presents a viable solution for achieving wide-bandwidth operation. An overview of prior art and recent approaches for phase modulation is presented in this paper. Phase quantization noise cancellation was recently introduced to lower the out-of-band noise in a digital phase modulator. A detailed analysis on the impact of timing and quantization of the cancellation signal is presented. Noise generated by the transmitter in the receive band frequency poses another challenge for wide-bandwidth transmitter design. Addition of a noise transfer function notch, in a digital phase modulator, to reduce the noise in the receive band during phase modulation is described in this paper.

Cell shunt resistance and photovoltaic module performance

Energy Technology Data Exchange (ETDEWEB)

McMahon, T.J.; Basso, T.S.; Rummel, S.R. [National Renewable Energy Lab., Golden, CO (United States)

1996-05-01

Shunt resistance of cells in photovoltaic modules can affect module power output and could indicate flawed manufacturing processes and reliability problems. The authors describe a two-terminal diagnostic method to directly measure the shunt resistance of individual cells in a series-connected module non-intrusively, without deencapsulation. Peak power efficiency vs. light intensity was measured on a 12-cell, series-connected, single crystalline module having relatively high cell shunt resistances. The module was remeasured with 0.5-, 1-, and 2-ohm resistors attached across each cell to simulate shunt resistances of several emerging technologies. Peak power efficiencies decreased dramatically at lower light levels. Using the PSpice circuit simulator, the authors verified that cell shunt and series resistances can indeed be responsible for the observed peak power efficiency vs. intensity behavior. The authors discuss the effect of basic cell diode parameters, i.e., shunt resistance, series resistance, and recombination losses, on PV module performance as a function of light intensity.

ANALYSIS OF HARMONIC INJECTION TO THE MODULATION OF ...

African Journals Online (AJOL)

2013-03-01

Mar 1, 2013 ... Abstract. This paper explores the analysis of third and ninth harmonic injection to the modulation of a multi- level diode clamped converter (DCC) at a varying modulation index. The spectral distributions of the various multi-level waveforms obtained under normal modulation index of 0.8 and over modulation ...

Modulation linearization of a frequency-modulated voltage controlled oscillator, part 3

Science.gov (United States)

Honnell, M. A.

1975-01-01

An analysis is presented for the voltage versus frequency characteristics of a varactor modulated VHF voltage controlled oscillator in which the frequency deviation is linearized by using the nonlinear characteristics of a field effect transistor as a signal amplifier. The equations developed are used to calculate the oscillator output frequency in terms of pertinent circuit parameters. It is shown that the nonlinearity exponent of the FET has a pronounced influence on frequency deviation linearity, whereas the junction exponent of the varactor controls total frequency deviation for a given input signal. A design example for a 250 MHz frequency modulated oscillator is presented.

Modulated Current Drive Measurements

International Nuclear Information System (INIS)

Petty, C.C.; Lohr, J.; Luce, T.C.; Prater, R.; Cox, W.A.; Forest, C.B.; Jayakumar, R.J.; Makowski, M.A.

2005-01-01

A new measurement approach is presented which directly determines the noninductive current profile from the periodic response of the motional Stark effect (MSE) signals to the slow modulation of the external current drive source. A Fourier transform of the poloidal magnetic flux diffusion equation is used to analyze the MSE data. An example of this measurement technique is shown using modulated electron cyclotron current drive (ECCD) discharges from the DIII-D tokamak

Silicon nanowire networks for multi-stage thermoelectric modules

International Nuclear Information System (INIS)

Norris, Kate J.; Garrett, Matthew P.; Zhang, Junce; Coleman, Elane; Tompa, Gary S.; Kobayashi, Nobuhiko P.

2015-01-01

Highlights: • Fabricated flexible single, double, and quadruple stacked Si thermoelectric modules. • Measured an enhanced power production of 27%, showing vertical stacking is scalable. • Vertically scalable thermoelectric module design of semiconducting nanowires. • Design can utilize either p or n-type semiconductors, both types are not required. • ΔT increases with thickness therefore power/area can increase as modules are stacked. - Abstract: We present the fabrication and characterization of single, double, and quadruple stacked flexible silicon nanowire network based thermoelectric modules. From double to quadruple stacked modules, power production increased 27%, demonstrating that stacking multiple nanowire thermoelectric devices in series is a scalable method to generate power by supplying larger temperature gradient. We present a vertically scalable multi-stage thermoelectric module design using semiconducting nanowires, eliminating the need for both n-type and p-type semiconductors for modules

Antimicrobial and modulation effects of selected Ghanaian ...

African Journals Online (AJOL)

The ethanol extracts of the three plants studied here are good modulators as they reduced the MIC of ciprofloxacin and ketoconazole by factors that are comparable to that of reserpine. However the exact compounds and their exact mechanism of modulation require further investigation. Keywords: Anti-infective, modulation, ...

Medical Terminology: Prefixes. Health Occupations Education Module.

Science.gov (United States)

Temple Univ., Philadelphia, PA. Div. of Vocational Education.

This module on medical terminology (prefixes) is one of 17 modules designed for individualized instruction in health occupations education programs at both the secondary and postsecondary levels. This module consists of an introduction to prefixes, a list of resources needed, and three learning experiences. Each learning experience contains an…

Medical Terminology: Root Words. Health Occupations Education Module.

Science.gov (United States)

Temple Univ., Philadelphia, PA. Div. of Vocational Education.

This module on medical terminology (root words) is one of 17 modules designed for individualized instruction in health occupations education programs at both the secondary and postsecondary levels. This module consists of an introduction to root words, a list of resources needed, procedures for using the module, a list of terminology used in the…

Interfacial reactions in thermoelectric modules

KAUST Repository

Wu, Hsin-jay

2018-02-21

Engineering transport properties of thermoelectric (TE) materials leads to incessantly breakthroughs in the zT values. Nevertheless, modular design holds a key factor to advance the TE technology. Herein, we discuss the structures of TE module and illustrate the inter-diffusions across the interface of constituent layers. For Bi2Te3-based module, soldering is the primary bonding method, giving rise to the investigations on the selections of solder, diffusion barrier layer and electrode. For mid-temperature PbTe-based TE module, hot-pressing or spark plasma sintering are alternative bonding approaches; the inter-diffusions between the diffusion barrier layer, electrode and TE substrate are addressed as well.

Improved ATIR concentrator photovoltaic module

Science.gov (United States)

Adriani, Paul M.; Mao, Erwang

2013-09-01

Novel aggregated total internal reflection (ATIR) concentrator photovoltaic module design comprises 2-D shaped primary and secondary optics that effectively combine optical efficiency, low profile, convenient range of acceptance angles, reliability, and manufacturability. This novel optical design builds upon previous investigations by improving the shapes of primary and secondary optics to enable improved long-term reliability and manufacturability. This low profile, low concentration (5x to 10x) design fits well with one-axis trackers that are often used for flat plate crystalline silicon photovoltaic modules in large scale ground mount installations. Standard mounting points, materials, and procedures apply without changes from flat plate modules.

Texture analysis on the fluence map to evaluate the degree of modulation for volumetric modulated arc therapy

International Nuclear Information System (INIS)

Park, So-Yeon; Kim, Il Han; Ye, Sung-Joon; Carlson, Joel

2014-01-01

Purpose: Texture analysis on fluence maps was performed to evaluate the degree of modulation for volumetric modulated arc therapy (VMAT) plans. Methods: A total of six textural features including angular second moment, inverse difference moment, contrast, variance, correlation, and entropy were calculated for fluence maps generated from 20 prostate and 20 head and neck VMAT plans. For each of the textural features, particular displacement distances (d) of 1, 5, and 10 were adopted. To investigate the deliverability of each VMAT plan, gamma passing rates of pretreatment quality assurance, and differences in modulating parameters such as multileaf collimator (MLC) positions, gantry angles, and monitor units at each control point between VMAT plans and dynamic log files registered by the Linac control system during delivery were acquired. Furthermore, differences between the original VMAT plan and the plan reconstructed from the dynamic log files were also investigated. To test the performance of the textural features as indicators for the modulation degree of VMAT plans, Spearman’s rank correlation coefficients (r s ) with the plan deliverability were calculated. For comparison purposes, conventional modulation indices for VMAT including the modulation complexity score for VMAT, leaf travel modulation complexity score, and modulation index supporting station parameter optimized radiation therapy (MI SPORT ) were calculated, and their correlations were analyzed in the same way. Results: There was no particular textural feature which always showed superior correlations with every type of plan deliverability. Considering the results comprehensively, contrast (d = 1) and variance (d = 1) generally showed considerable correlations with every type of plan deliverability. These textural features always showed higher correlations to the plan deliverability than did the conventional modulation indices, except in the case of modulating parameter differences. The r s values

Free online otolaryngology educational modules: a pilot study.

Science.gov (United States)

Cabrera-Muffly, Cristina; Bryson, Paul C; Sykes, Kevin J; Shnayder, Yelizaveta

2015-04-01

Otolaryngology residents need concise, easily accessible modules to expand educational opportunities between surgical cases. These modules should be inexpensive to create and improve learning outcomes. The purpose of this pilot study was to assess whether otolaryngology residents at multiple institutions used online video modules to supplement their studying for the Otolaryngology Training Exam, whether the modules had any effect on their Otolaryngology Training Examination Scores, and to obtain survey feedback about the modules. This randomized trial was conducted in 3 academic departments of otolaryngology in the United States among 37 residents enrolled in 3 otolaryngology residency programs. Residents were randomized into 2 groups, one with access to the educational modules and the other with no access. Otolaryngology training examination scores were obtained from the year prior to the intervention (2012) and the year following module access (2013). Residents with access to the modules were also surveyed to assess use and obtain feedback about the modules. Otolaryngology training examination scores improved significantly from 2012 to 2013 among both residents who had access to the modules and those who did not in the sections of head and neck, laryngology, and sleep medicine. However, scores in the sections of pediatric otolaryngology (8% increase, P = .03), otology (7% increase, P = .02), and facial plastic surgery (10% increase, P = .02) improved from 2012 to 2013 only among residents with access to the modules. All respondents rated the videos as very helpful, with a rating of 4 of 5 on a Likert scale. Online otolaryngology educational modules are an inexpensive way to expand resident learning opportunities. Despite the lack of quantifiable improvement in otolaryngology training examination scores in this study, use of online modules sends a message to otolaryngology residents that their education is a priority; self-study outside the hospital

Liquid crystal television spatial light modulators

Science.gov (United States)

Liu, Hua-Kuang; Chao, Tien-Hsin

1989-01-01

The spatial light modulation characteristics and capabilities of the liquid crystal television (LCTV) spatial light modulators (SLMs) are discussed. A comparison of Radio Shack, Epson, and Citizen LCTV SLMs is made.

Earth System Science Education Modules

Science.gov (United States)

Hall, C.; Kaufman, C.; Humphreys, R. R.; Colgan, M. W.

2009-12-01

The College of Charleston is developing several new geoscience-based education modules for integration into the Earth System Science Education Alliance (ESSEA). These three new modules provide opportunities for science and pre-service education students to participate in inquiry-based, data-driven experiences. The three new modules will be discussed in this session. Coastal Crisis is a module that analyzes rapidly changing coastlines and uses technology - remotely sensed data and geographic information systems (GIS) to delineate, understand and monitor changes in coastal environments. The beaches near Charleston, SC are undergoing erosion and therefore are used as examples of rapidly changing coastlines. Students will use real data from NASA, NOAA and other federal agencies in the classroom to study coastal change. Through this case study, learners will acquire remotely sensed images and GIS data sets from online sources, utilize those data sets within Google Earth or other visualization programs, and understand what the data is telling them. Analyzing the data will allow learners to contemplate and make predictions on the impact associated with changing environmental conditions, within the context of a coastal setting. To Drill or Not To Drill is a multidisciplinary problem based module to increase students’ knowledge of problems associated with nonrenewable resource extraction. The controversial topic of drilling in the Arctic National Wildlife Refuge (ANWR) examines whether the economic benefit of the oil extracted from ANWR is worth the social cost of the environmental damage that such extraction may inflict. By attempting to answer this question, learners must balance the interests of preservation with the economic need for oil. The learners are exposed to the difficulties associated with a real world problem that requires trade-off between environmental trust and economic well-being. The Citizen Science module challenges students to translate scientific

Nonlinear self-modulation of ion-acoustic waves

International Nuclear Information System (INIS)

Ikezi, H.; Schwarzenegger, K.; Simons, A.L.; Ohsawa, Y.; Kamimura, T.

1978-01-01

The nonlinear evolution of an ion-acoustic wave packet is studied. Experimentally, it is found that (i) nonlinear phase modulation develops in the wave packet; (ii) the phase modulation, together with the dispersion effect, causes expansion and breaking of the wave packet; (iii) the ions trapped in the troughs of the wave potential introduce self-phase modulation; and (iv) the ion-acoustic wave is stable with respect to the modulational instability. Computer simulations have reproduced the experimental results. The physical picture and the model equation describing the wave evolution are discussed

SLAC modulator system improvements and reliability results

International Nuclear Information System (INIS)

Donaldson, A.R.

1998-06-01

In 1995, an improvement project was completed on the 244 klystron modulators in the linear accelerator. The modulator system has been previously described. This article offers project details and their resulting effect on modulator and component reliability. Prior to the project, the authors had collected four operating cycles (1991 through 1995) of MTTF data. In this discussion, the '91 data will be excluded since the modulators operated at 60 Hz. The five periods following the '91 run were reviewed due to the common repetition rate at 120 Hz

Mounting support for a photovoltaic module

Science.gov (United States)

Brandt, Gregory Michael; Barsun, Stephan K.; Coleman, Nathaniel T.; Zhou, Yin

2013-03-26

A mounting support for a photovoltaic module is described. The mounting support includes a foundation having an integrated wire-way ledge portion. A photovoltaic module support mechanism is coupled with the foundation.

Demazure Modules, Fusion Products and Q-Systems

Science.gov (United States)

Chari, Vyjayanthi; Venkatesh, R.

2015-01-01

In this paper, we introduce a family of indecomposable finite-dimensional graded modules for the current algebra associated to a simple Lie algebra. These modules are indexed by an -tuple of partitions , where α varies over a set of positive roots of and we assume that they satisfy a natural compatibility condition. In the case when the are all rectangular, for instance, we prove that these modules are Demazure modules in various levels. As a consequence, we see that the defining relations of Demazure modules can be greatly simplified. We use this simplified presentation to relate our results to the fusion products, defined in (Feigin and Loktev in Am Math Soc Transl Ser (2) 194:61-79, 1999), of representations of the current algebra. We prove that the Q-system of (Hatayama et al. in Contemporary Mathematics, vol. 248, pp. 243-291. American Mathematical Society, Providence, 1998) extends to a canonical short exact sequence of fusion products of representations associated to certain special partitions .Finally, in the last section we deal with the case of and prove that the modules we define are just fusion products of irreducible representations of the associated current algebra and give monomial bases for these modules.

Charging a Capacitor with a Photovoltaic Module

Science.gov (United States)

Aguilar, Horacio Munguía; Maldonado, Rigoberto Franco; Navarro, Luis Barba

2017-01-01

Charging a capacitor with a photovoltaic module is an experiment which reveals a lot about the modules characteristics. It is customary to represent these characteristics with an equivalent circuit whose elements represent its physical parameters. The behavior of a photovoltaic module is very similar to that of a single cell but the electric…

Unified Technical Concepts. Module 8: Force Transformers.

Science.gov (United States)

Technical Education Research Center, Waco, TX.

This concept module on force transformers is one of thirteen modules that provide a flexible, laboratory-based physics instructional package designed to meet the specialized needs of students in two-year, postsecondary technical schools. Each of the thirteen concept modules discusses a single physics concept and how it is applied to each energy…

Finite Element calculations of heat transfer for the Forward SCT ModulesPart II - the Inner Module ATL-COM-INDET-2000-015

CERN Document Server

Blocki, J

2000-01-01

A status report on the thermal performance of the baseline SCT inner forward modules is presented. In order to understand improvements of the thermal behaviour, design changes that have been proposed elsewhere for the outer module, and which lead to significant improvements of the thermal characteristics of the modules, have been applied to the inner module.

Report on the SCT Forward Electrical Module Program

CERN Document Server

Benes, J; Feld, L; Hornung, M; Joos, D; Ketterer, C; Kodys, P; Kubik, P; Ludwig, J; Modesto, P; Rieth, G; Runge, K; Smith, T; Snow, S W; Taylor, G; Webel, M

1999-01-01

IN THE CONTEXT OF THE ATLAS SCT FORWARD HYBRID PROGRAM, THREEELECTRICAL DETECTOR MODULES HAVE BEEN BUILT. THIS NOTE DESCRIBES THEASSEMBLY AND SUMMARISES THE MECHANICAL AND ELECTRICAL PROPERTIES OFTHESE MODULES. SOME COMMENTS ON THE SPECIAL REQUIREMENTS OF THEPRODUCTION OF A REAL MODULE AS COMPARED TO DUMMY MODULES ARE GIVEN.A LIST OF OPEN QUESTIONS ARISING FROM THIS ASSEMBLY RUN IS APPENDED.

Development and deployment of innovative distance education modules

Energy Technology Data Exchange (ETDEWEB)

Hsu, Wen-Hsing [Nuclear Science Centre, Texas A and M University, 1095 Nuclear Science RD, College Station, Texas 77843 (United States); Reece, W. Daniel [Nuclear Engineering Department, Texas A and M University, College Station, Texas 77843 (United States)

2010-07-01

The potential of distance education/learning to deliver knowledge to learners outside the classroom is increasing dramatically as the technologies evolve. Through the past seven years at Texas A and M University Nuclear Science Centre, media-rich distance learning modules of lectures has been developed using the cutting edge technology available. Accordingly, the framework of modularised distance education modules has been established as well. Each module, closed caption enabled, consists of short interactive videos with animations and quizzes embedded. Those individual videos can be regrouped to form a new module depending on the contents of the lecture. The framework of this system was explained and the procedures of creating those modules were detailed. Different deployment methodologies of those modules were also discussed. (authors)

Development and deployment of innovative distance education modules

International Nuclear Information System (INIS)

Hsu, Wen-Hsing; Reece, W. Daniel

2010-01-01

The potential of distance education/learning to deliver knowledge to learners outside the classroom is increasing dramatically as the technologies evolve. Through the past seven years at Texas A and M University Nuclear Science Centre, media-rich distance learning modules of lectures has been developed using the cutting edge technology available. Accordingly, the framework of modularised distance education modules has been established as well. Each module, closed caption enabled, consists of short interactive videos with animations and quizzes embedded. Those individual videos can be regrouped to form a new module depending on the contents of the lecture. The framework of this system was explained and the procedures of creating those modules were detailed. Different deployment methodologies of those modules were also discussed. (authors)

Cascaded Amplitude Modulations in Sound Texture Perception

DEFF Research Database (Denmark)

McWalter, Richard Ian; Dau, Torsten

2017-01-01

. In this study, we investigated the perception of sound textures that contain rhythmic structure, specifically second-order amplitude modulations that arise from the interaction of different modulation rates, previously described as "beating" in the envelope-frequency domain. We developed an auditory texture...... model that utilizes a cascade of modulation filterbanks that capture the structure of simple rhythmic patterns. The model was examined in a series of psychophysical listening experiments using synthetic sound textures-stimuli generated using time-averaged statistics measured from real-world textures....... In a texture identification task, our results indicated that second-order amplitude modulation sensitivity enhanced recognition. Next, we examined the contribution of the second-order modulation analysis in a preference task, where the proposed auditory texture model was preferred over a range of model...

Orion Crew Module / Service Module Structural Weight and Center of Gravity Simulator and Vehicle Motion Simulator Hoist Structure for Orion Service Module Umbilical Testing

Science.gov (United States)

Ascoli, Peter A.; Haddock, Michael H.

2014-01-01

An Orion Crew Module Service Module Structural Weight and Center of Gravity Simulator and a Vehicle Motion Simulator Hoist Structure for Orion Service Module Umbilical Testing were designed during a summer 2014 internship in Kennedy Space Centers Structures and Mechanisms Design Branch. The simulator is a structure that supports ballast, which will be integrated into an existing Orion mock-up to simulate the mass properties of the Exploration Mission-1 flight vehicle in both fueled and unfueled states. The simulator mimics these configurations through the use of approximately 40,000 lbf of steel and water ballast, and a steel support structure. Draining four water tanks, which house the water ballast, transitions the simulator from the fueled to unfueled mass properties. The Ground Systems Development and Operations organization will utilize the simulator to verify and validate equipment used to maneuver and transport the Orion spacecraft in its fueled and unfueled configurations. The second design comprises a cantilevered tripod hoist structure that provides the capability to position a large Orion Service Module Umbilical in proximity to the Vehicle Motion Simulator. The Ground Systems Development and Operations organization will utilize the Vehicle Motion Simulator, with the hoist structure attached, to test the Orion Service Module Umbilical for proper operation prior to installation on the Mobile Launcher. Overall, these two designs provide NASA engineers viable concepts worthy of fabricating and placing into service to prepare for the launch of Orion in 2017.

Is my network module preserved and reproducible?

Directory of Open Access Journals (Sweden)

Peter Langfelder

2011-01-01

Full Text Available In many applications, one is interested in determining which of the properties of a network module change across conditions. For example, to validate the existence of a module, it is desirable to show that it is reproducible (or preserved in an independent test network. Here we study several types of network preservation statistics that do not require a module assignment in the test network. We distinguish network preservation statistics by the type of the underlying network. Some preservation statistics are defined for a general network (defined by an adjacency matrix while others are only defined for a correlation network (constructed on the basis of pairwise correlations between numeric variables. Our applications show that the correlation structure facilitates the definition of particularly powerful module preservation statistics. We illustrate that evaluating module preservation is in general different from evaluating cluster preservation. We find that it is advantageous to aggregate multiple preservation statistics into summary preservation statistics. We illustrate the use of these methods in six gene co-expression network applications including 1 preservation of cholesterol biosynthesis pathway in mouse tissues, 2 comparison of human and chimpanzee brain networks, 3 preservation of selected KEGG pathways between human and chimpanzee brain networks, 4 sex differences in human cortical networks, 5 sex differences in mouse liver networks. While we find no evidence for sex specific modules in human cortical networks, we find that several human cortical modules are less preserved in chimpanzees. In particular, apoptosis genes are differentially co-expressed between humans and chimpanzees. Our simulation studies and applications show that module preservation statistics are useful for studying differences between the modular structure of networks. Data, R software and accompanying tutorials can be downloaded from the following webpage: http://www.genetics.ucla.edu/labs/horvath/CoexpressionNetwork/ModulePreservation.

Web-based Learning Modules using Research Data

Science.gov (United States)

Pilachowski, Catherine A.; Hamper, R.; Morris, F.

2011-01-01

Three web-based learning modules for introductory undergraduate astronomy courses are available at Indiana University Bloomington. The NovaSearch module allows students to view images of the core of the Andromeda Galaxy to discover novae and monitor their light curves. The Proper Pair module allows students to examine proper motion and parallax data from Hipparcos to determine if pairs of stars close together on the sky are true binary star systems. A third module, Astronomy in Color, allows students to produce color images using multi-wavelength data. The pedagogical goals of these curriculum materials are to teach that science is a process of discovery, not just a body of knowledge, to increase positive attitudes towards science by engaging students in discovery, and to motivate students towards pursuing STEM careers by giving students an opportunity to develop skills such as critical thinking, teamwork, and task focus that are important in any career path. The learning modules may be accessed at www.astro.indiana.edu/catyp/rbseu The development of these curriculum modules has been funded by the national Science Foundation through grant DUE-0618441.

Direct modulation of 56 Gbps duobinary-4-PAM

DEFF Research Database (Denmark)

Suhr, Lau Frejstrup; Vegas Olmos, Juan José; Mao, Bangning

2015-01-01

This paper reports on the direct modulation of externally modulated laser and transmission through single mode fiber of a 56 Gbps duobinary-4-pulse amplitude modulation signal through 10 GHz class optics....

Acquisition system for the CLIC Module

CERN Document Server

Vilalte, Sebastien

2011-01-01

The status of R&D activities for CLIC module acquisition are discussed [1]. LAPP is involved in the design of the local CLIC module acquisition crate, described in the document Study of the CLIC Module Front-End Acquisition and Evaluation Electronics [2]. This acquisition system is a project based on a local crate, assigned to the CLIC module, including several mother boards. These motherboards are foreseen to hold mezzanines dedicated to the different subsystems. This system has to work in radiation environment. LAPP is involved in the development of Drive Beam stripline position monitors read-out, described in the document Drive Beam Stripline BPM Electronics and Acquisition [3]. LAPP also develops a generic acquisition mezzanine that allows to perform all-around acquisition and components tests for drive beam stripline BPM read-out.

Memory Modulation

NARCIS (Netherlands)

Roozendaal, Benno; McGaugh, James L.

2011-01-01

Our memories are not all created equally strong: Some experiences are well remembered while others are remembered poorly, if at all. Research on memory modulation investigates the neurobiological processes and systems that contribute to such differences in the strength of our memories. Extensive

Graphene-based hybrid plasmonic modulator

International Nuclear Information System (INIS)

Shin, Jin-Soo; Kim, Jin-Soo; Tae Kim, Jin

2015-01-01

A graphene-based hybrid plasmonic modulator is designed based on an asymmetric double-electrode plasmonic waveguide structure. The photonic device consists of a monolayer graphene, a thin metal strip, and a thin dielectric layer that is inserted between the grapheme and the metal strip. By electrically tuning the graphene’s refractive index, the propagation loss of the hybrid long-range surface plasmon polariton strip mode in the proposed graphene-based hybrid plasmonic waveguide is switchable, and hence the intensity of the guided modes is modulated. The highest modulation depth is observed at the graphene’s epsilon-near-zero region. The device characteristics are characterized over the entire C-band (1.530–1.565 μm). (paper)

Texture analysis on the fluence map to evaluate the degree of modulation for volumetric modulated arc therapy

Energy Technology Data Exchange (ETDEWEB)

Park, So-Yeon [Department of Radiation Oncology, Seoul National University Hospital, Seoul 110-744 (Korea, Republic of); Institute of Radiation Medicine, Seoul National University Medical Research Center, Seoul 110-744 (Korea, Republic of); Biomedical Research Institute, Seoul National University College of Medicine, Seoul 110-744 (Korea, Republic of); Interdisciplinary Program in Radiation Applied Life Science, Seoul National University College of Medicine, Seoul 110-799 (Korea, Republic of); Kim, Il Han [Department of Radiation Oncology, Seoul National University Hospital, Seoul 110-744 (Korea, Republic of); Institute of Radiation Medicine, Seoul National University Medical Research Center, Seoul 110-744 (Korea, Republic of); Biomedical Research Institute, Seoul National University College of Medicine, Seoul 110-744 (Korea, Republic of); Department of Radiation Oncology, Seoul National University College of Medicine, Seoul 110-744 (Korea, Republic of); Ye, Sung-Joon [Department of Radiation Oncology, Seoul National University Hospital, Seoul 110-744, (Korea, Republic of); Institute of Radiation Medicine, Seoul National University Medical Research Center, Seoul 110-744 (Korea, Republic of); Biomedical Research Institute, Seoul National University College of Medicine, Seoul 110-744 (Korea, Republic of); Program in Biomedical Radiation Sciences, Department of Transdisciplinary Studies, Seoul National University Graduate School of Convergence Science and Technology, Suwon 433-270 (Korea, Republic of); Carlson, Joel [Biomedical Research Institute, Seoul National University College of Medicine, Seoul 110-744 (Korea, Republic of); Program in Biomedical Radiation Sciences, Department of Transdisciplinary Studies, Seoul National University Graduate School of Convergence Science and Technology, Suwon 433-270 (Korea, Republic of); and others

2014-11-01

Purpose: Texture analysis on fluence maps was performed to evaluate the degree of modulation for volumetric modulated arc therapy (VMAT) plans. Methods: A total of six textural features including angular second moment, inverse difference moment, contrast, variance, correlation, and entropy were calculated for fluence maps generated from 20 prostate and 20 head and neck VMAT plans. For each of the textural features, particular displacement distances (d) of 1, 5, and 10 were adopted. To investigate the deliverability of each VMAT plan, gamma passing rates of pretreatment quality assurance, and differences in modulating parameters such as multileaf collimator (MLC) positions, gantry angles, and monitor units at each control point between VMAT plans and dynamic log files registered by the Linac control system during delivery were acquired. Furthermore, differences between the original VMAT plan and the plan reconstructed from the dynamic log files were also investigated. To test the performance of the textural features as indicators for the modulation degree of VMAT plans, Spearman’s rank correlation coefficients (r{sub s}) with the plan deliverability were calculated. For comparison purposes, conventional modulation indices for VMAT including the modulation complexity score for VMAT, leaf travel modulation complexity score, and modulation index supporting station parameter optimized radiation therapy (MI{sub SPORT}) were calculated, and their correlations were analyzed in the same way. Results: There was no particular textural feature which always showed superior correlations with every type of plan deliverability. Considering the results comprehensively, contrast (d = 1) and variance (d = 1) generally showed considerable correlations with every type of plan deliverability. These textural features always showed higher correlations to the plan deliverability than did the conventional modulation indices, except in the case of modulating parameter differences. The r

Overview of radar intra-pulse modulation recognition

Science.gov (United States)

Zang, Hanlin; Li, Yanling

2018-05-01

This paper introduces the current radar intra-pulse modulation method, describes the status quo and development direction of the intentional modulation and unintentional modulation in the pulse, and summarizes the existing problems and prospects for the future. Looking forward to the future, and providing a reference direction for the research on radar signal recognition in the next step.

Scaling vectors of attoJoule per bit modulators

Science.gov (United States)

Sorger, Volker J.; Amin, Rubab; Khurgin, Jacob B.; Ma, Zhizhen; Dalir, Hamed; Khan, Sikandar

2018-01-01

Electro-optic modulation performs the conversion between the electrical and optical domain with applications in data communication for optical interconnects, but also for novel optical computing algorithms such as providing nonlinearity at the output stage of optical perceptrons in neuromorphic analog optical computing. While resembling an optical transistor, the weak light-matter-interaction makes modulators 105 times larger compared to their electronic counterparts. Since the clock frequency for photonics on-chip has a power-overhead sweet-spot around tens of GHz, ultrafast modulation may only be required in long-distance communication, not for short on-chip links. Hence, the search is open for power-efficient on-chip modulators beyond the solutions offered by foundries to date. Here, we show scaling vectors towards atto-Joule per bit efficient modulators on-chip as well as some experimental demonstrations of novel plasmonic modulators with sub-fJ/bit efficiencies. Our parametric study of placing different actively modulated materials into plasmonic versus photonic optical modes shows that 2D materials overcompensate their miniscule modal overlap by their unity-high index change. Furthermore, we reveal that the metal used in plasmonic-based modulators not only serves as an electrical contact, but also enables low electrical series resistances leading to near-ideal capacitors. We then discuss the first experimental demonstration of a photon-plasmon-hybrid graphene-based electro-absorption modulator on silicon. The device shows a sub-1 V steep switching enabled by near-ideal electrostatics delivering a high 0.05 dB V-1 μm-1 performance requiring only 110 aJ/bit. Improving on this demonstration, we discuss a plasmonic slot-based graphene modulator design, where the polarization of the plasmonic mode aligns with graphene’s in-plane dimension; where a push-pull dual-gating scheme enables 2 dB V-1 μm-1 efficient modulation allowing the device to be just 770 nm

Perceptual interaction between carrier periodicity and amplitude modulation in broadband stimuli: A comparison of the autocorrelation and modulation-filterbank model

DEFF Research Database (Denmark)

Stein, A.; Ewert, Stephan; Wiegrebe, L.

2005-01-01

, autocorrelation is applied. Considering the large overlap in pitch and modulation perception, this is not parsimonious. Two experiments are presented to investigate the interaction between carrier periodicity, which produces strong pitch sensations, and envelope periodicity using broadband stimuli. Results show......Recent temporal models of pitch and amplitude modulation perception converge on a relatively realistic implementation of cochlear processing followed by a temporal analysis of periodicity. However, for modulation perception, a modulation filterbank is applied whereas for pitch perception...

Optically Modulated Multiband Terahertz Perfect Absorber

DEFF Research Database (Denmark)

Seren, Huseyin R.; Keiser, George R.; Cao, Lingyue

2014-01-01

response of resonant metamaterials continues to be a challengingendeavor. Resonant perfect absorbers have flourished as one of the mostpromising metamaterial devices with applications ranging from power har-vesting to terahertz imaging. Here, an optically modulated resonant perfectabsorber is presented....... Utilizing photo-excited free carriers in silicon padsplaced in the capacitive gaps of split ring resonators, a dynamically modu-lated perfect absorber is designed and fabricated to operate in reflection.Large modulation depth (38% and 91%) in two absorption bands (with 97%and 92% peak absorption...

Coincidence logic modules for criticality alarming

International Nuclear Information System (INIS)

Schaief, C.C. III.

1977-04-01

A coincidence Logic Module and a companion contact closure Relay Module utilizing the NIM Standard have been developed for criticality alarming. The units provide an ALARM whenever two or more out of N detectors become activated. In addition, an ALERT is generated whenever one or more detectors is activated or when certain electronic component failures occur. The number of detector inputs (N) can be expanded in groups of six by adding modules. Serial and parallel redundancy were used to reduce the probability of system failure

Amplitude and phase modulation with waveguide optics

International Nuclear Information System (INIS)

Burkhart, S.C.; Wilcox, R.B.; Browning, D.; Penko, F.A.

1996-01-01

We have developed amplitude and phase modulation systems for glass lasers using integrated electro-optic modulators and solid state high-speed electronics. The present and future generation of lasers for Inertial Confinement Fusion require laser beams with complex temporal and phase shaping to compensate for laser gain saturation, mitigate parametric processes such as transverse stimulated Brillouin scattering in optics, and to provide specialized drive to the fusion targets. These functions can be performed using bulk optoelectronic modulators, however using high-speed electronics to drive low voltage integrated optical modulators has many practical advantages. In particular, we utilize microwave GaAs transistors to perform precision, 250 ps resolution temporal shaping. Optical bandwidth is generated using a microwave oscillator at 3 GHz amplified by a solid state amplifier. This drives an integrated electrooptic modulator to achieve laser bandwidths exceeding 30 GHz

Some ways for the investigation of the solar modulation of cosmic electrons; Moyens d'etude de la modulation solaire des electrons cosmiques

Energy Technology Data Exchange (ETDEWEB)

Mercier, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1969-07-01

In this report, we are investigating the solar modulation of cosmic electrons, in different ways. By comparing the calculated intensity with the measured intensity of positrons, we can evaluate the solar modulation of positrons, hence the modulation of negatons, since the modulation of negatons is probably the same that for positrons. By comparing the electron spectrum in interstellar space needed to explain the galactic background radio emission with that observed near the earth, we can deduce information about the modulation of electrons. We can investigate the modulation through the observation of its variations during the solar cycle. This different ways lead us to compatible results. In spite of the fact that the precision of the experimental data is poor, the modulation can be represented by: a constant or a form in exp(- K/Ro{beta}) under the rigidity Ro {approx_equal} 0,5 BV; a form in exp(- K/R) or exp(- K/R{beta}) above this rigidity. In addition, the investigation of both electrons and protons displays that the diffusion-convection theory is inadequate to explain all the features of the solar modulation. (author) [French] Dans le present rapport, nous etudions la modulation solaire des electrons cosmiques a l'aide de plusieurs methodes. Par comparaison entre l'intensite calculee et l'intensite mesuree des positons, on peut evaluer la modulation solaire des positons, et aussi des negatons, puisque la modulation des negatons est probablement la meme que celle des positons. Par le calcul, a partir du bruit de fond radio, du flux des electrons a l'exterieur du systeme solaire et sa confrontation avec le flux observe a l'orbite de la Terre permet l'etude de la modulation solaire des electrons. On peut aussi analyser ce phenomene de modulation pour l'etude de ses variations au cours du cycle solaire. Ces diverses methodes donnent des resultats compatibles. En depit de la precision mediocre des donnees experimentales, on peut caracteriser la modulation par: une

Nootropic α7 nicotinic receptor allosteric modulator derived from GABAA receptor modulators

Science.gov (United States)

Ng, Herman J.; Whittemore, Edward R.; Tran, Minhtam B.; Hogenkamp, Derk J.; Broide, Ron S.; Johnstone, Timothy B.; Zheng, Lijun; Stevens, Karen E.; Gee, Kelvin W.

2007-01-01

Activation of brain α7 nicotinic acetylcholine receptors (α7 nAChRs) has broad therapeutic potential in CNS diseases related to cognitive dysfunction, including Alzheimer's disease and schizophrenia. In contrast to direct agonist activation, positive allosteric modulation of α7 nAChRs would deliver the clinically validated benefits of allosterism to these indications. We have generated a selective α7 nAChR-positive allosteric modulator (PAM) from a library of GABAA receptor PAMs. Compound 6 (N-(4-chlorophenyl)-α-[[(4-chloro-phenyl)amino]methylene]-3-methyl-5-isoxazoleacet-amide) evokes robust positive modulation of agonist-induced currents at α7 nAChRs, while preserving the rapid native characteristics of desensitization, and has little to no efficacy at other ligand-gated ion channels. In rodent models, it corrects sensory-gating deficits and improves working memory, effects consistent with cognitive enhancement. Compound 6 represents a chemotype for allosteric activation of α7 nAChRs, with therapeutic potential in CNS diseases with cognitive dysfunction. PMID:17470817

A compact 16-module camera using 64-pixel CsI(Tl)/Si p-i-n photodiode imaging modules

Science.gov (United States)

Choong, W.-S.; Gruber, G. J.; Moses, W. W.; Derenzo, S. E.; Holland, S. E.; Pedrali-Noy, M.; Krieger, B.; Mandelli, E.; Meddeler, G.; Wang, N. W.; Witt, E. K.

2002-10-01

We present a compact, configurable scintillation camera employing a maximum of 16 individual 64-pixel imaging modules resulting in a 1024-pixel camera covering an area of 9.6 cm/spl times/9.6 cm. The 64-pixel imaging module consists of optically isolated 3 mm/spl times/3 mm/spl times/5 mm CsI(Tl) crystals coupled to a custom array of Si p-i-n photodiodes read out by a custom integrated circuit (IC). Each imaging module plugs into a readout motherboard that controls the modules and interfaces with a data acquisition card inside a computer. For a given event, the motherboard employs a custom winner-take-all IC to identify the module with the largest analog output and to enable the output address bits of the corresponding module's readout IC. These address bits identify the "winner" pixel within the "winner" module. The peak of the largest analog signal is found and held using a peak detect circuit, after which it is acquired by an analog-to-digital converter on the data acquisition card. The camera is currently operated with four imaging modules in order to characterize its performance. At room temperature, the camera demonstrates an average energy resolution of 13.4% full-width at half-maximum (FWHM) for the 140-keV emissions of /sup 99m/Tc. The system spatial resolution is measured using a capillary tube with an inner diameter of 0.7 mm and located 10 cm from the face of the collimator. Images of the line source in air exhibit average system spatial resolutions of 8.7- and 11.2-mm FWHM when using an all-purpose and high-sensitivity parallel hexagonal holes collimator, respectively. These values do not change significantly when an acrylic scattering block is placed between the line source and the camera.

279 Watt Metal-Wrap-Through module using industrial processes

Energy Technology Data Exchange (ETDEWEB)

Guillevin, N.; Heurtault, B.; Geerligs, L.J.; Anker, J.; Van Aken, B.B.; Bennett, I.J.; Jansen, M.J.; Berkeveld, L.D.; Weeber, A.W.; Bultman, J.H. [ECN Solar Energy, PO Box 1, 1755 ZG Petten (Netherlands); Wenchao, Zhao; Jianming, Wang; Ziqian, Wang; Yingle, Chen; Yanlong, Shen; Zhiyan, Hu; Gaofei, Li; Jianhui, Chen; Bo, Yu; Shuquan, Tian; Jingfeng, Xiong [Yingli Solar, 3399 Chaoyang North Street, Baoding (China)

2012-09-15

This paper describes results of metal wrap through (MWT) cells produced from n-type Czochralski silicon wafers, and modules produced from those cells. The use of n-type silicon as base material allows for high efficiencies: for front emitter contacted industrial cells, efficiencies up to 20% have been reported. MWT cells allow even higher cell efficiency due to reduced front metal coverage, and additionally full back-contacting of the MWT cells in a module results in reduced cell to module (CTM) fill factor losses. MWT cells were produced by industrial process technologies. The efficiency of the MWT cells reproducibly exceeds the efficiency of front contact cells based on the same technology by about 0.2-0.3%, and routes for further improvement are analyzed. 60-cell modules were produced from both types of cells (MWT and H-pattern front emitter). In a direct module performance comparison, the MWT module, based on integrated backfoil, produced 3% higher power output than the comparable tabbed front emitter contact module. CTM current differences arise from the higher packing density, and in this experiment from a lower reflectance of the backfoil, in MWT modules. CTM FF differences are related to resistive losses in copper circuitry on the backfoil versus tabs. The CTM FF loss of the MWT module was reduced by 2.2%abs compared to the tabbed front emitter contact module. Finally, simple process optimizations were tested to improve the n-type MWT cell and module efficiency. A module made using MWT cells of 19.6% average efficiency resulted in a power output of 279W. The cell and module results are analyzed and routes for improvements are discussed.

Construction of the ATLAS SCT Endcap modules

International Nuclear Information System (INIS)

Snow, Stephen W.

2007-01-01

The ATLAS Semi-Conductor Tracker (SCT) uses silicon strip detectors to measure trajectories of charged particles coming from 14 TeV proton-proton collisions at the Large Hadron Collider at CERN. The SCT provides at least four space points, in the radial range of 27-50 cm from the beam, for tracks within the angular acceptance vertical bar η vertical bar <2.5. The SCT is built up of 4088 modules, each consisting of two or four silicon detectors, a hybrid carrying several readout ASICS, and other components to support, cool and align the detectors. We report on construction of over 2000 end-cap modules of the SCT by a group of 14 institutes from seven countries. A key aspect of the project was to fully standardise the final module tests and to insist that test data from all institutes was stored in a single central database, while leaving institutes flexibility to vary their module assembly methods to suit local circumstances. First the module specifications and tests used for quality control are summarised, then we describe the main test results. Finally, we report our experience in terms of component quality, assembly and testing rates, yield of good modules and causes of lost modules. At the outset we assumed losses during assembly of 15% and procured components accordingly; in fact, losses were around 7%

Degradation analysis of thin film photovoltaic modules

International Nuclear Information System (INIS)

Radue, C.; Dyk, E.E. van

2009-01-01

Five thin film photovoltaic modules were deployed outdoors under open circuit conditions after a thorough indoor evaluation. Two technology types were investigated: amorphous silicon (a-Si:H) and copper indium gallium diselenide (CIGS). Two 14 W a-Si:H modules, labelled Si-1 and Si-2, were investigated. Both exhibited degradation, initially due to the well-known light-induced degradation described by Staebler and Wronski [Applied Physics Letters 31 (4) (1977) 292], and thereafter due to other degradation modes such as cell degradation. The various degradation modes contributing to the degradation of the a-Si:H modules will be discussed. The initial maximum power output (P MAX ) of Si-1 was 9.92 W, with the initial light-induced degradation for Si-1 ∼30% and a total degradation of ∼42%. For Si-2 the initial P MAX was 7.93 W, with initial light-induced degradation of ∼10% and a total degradation of ∼17%. Three CIGS modules were investigated: two 20 W modules labelled CIGS-1 and CIGS-2, and a 40 W module labelled CIGS-3. CIGS-2 exhibited stable performance while CIGS-1 and CIGS-3 exhibited degradation. CIGS is known to be stable over long periods of time, and thus the possible reasons for the degradation of the two modules are discussed.

Degradation analysis of thin film photovoltaic modules

Energy Technology Data Exchange (ETDEWEB)

Radue, C., E-mail: chantelle.radue@nmmu.ac.z [Department of Physics, PO Box 77000, Nelson Mandela Metropolitan University, Port Elizabeth 6031 (South Africa); Dyk, E.E. van [Department of Physics, PO Box 77000, Nelson Mandela Metropolitan University, Port Elizabeth 6031 (South Africa)

2009-12-01

Five thin film photovoltaic modules were deployed outdoors under open circuit conditions after a thorough indoor evaluation. Two technology types were investigated: amorphous silicon (a-Si:H) and copper indium gallium diselenide (CIGS). Two 14 W a-Si:H modules, labelled Si-1 and Si-2, were investigated. Both exhibited degradation, initially due to the well-known light-induced degradation described by Staebler and Wronski [Applied Physics Letters 31 (4) (1977) 292], and thereafter due to other degradation modes such as cell degradation. The various degradation modes contributing to the degradation of the a-Si:H modules will be discussed. The initial maximum power output (P{sub MAX}) of Si-1 was 9.92 W, with the initial light-induced degradation for Si-1 approx30% and a total degradation of approx42%. For Si-2 the initial P{sub MAX} was 7.93 W, with initial light-induced degradation of approx10% and a total degradation of approx17%. Three CIGS modules were investigated: two 20 W modules labelled CIGS-1 and CIGS-2, and a 40 W module labelled CIGS-3. CIGS-2 exhibited stable performance while CIGS-1 and CIGS-3 exhibited degradation. CIGS is known to be stable over long periods of time, and thus the possible reasons for the degradation of the two modules are discussed.

Solar cycle modulation of ENSO variability

Science.gov (United States)

Kodera, Kunihiko; Thiéblemont, Rémi

2016-04-01

Inspired by the work of Labitzke and van Loon on solar/QBO modulation in the stratosphere, Barnett (1989) conducted an investigation on the relationship between the the biannual component of the sea surface temperature (SST) in the equatorial eastern Pacific and the solar activity. He found that the amplitude of biannual component of the SST (BO) is modulated by the 11-year solar cycle: the amplitude of the BO is large during a period of low solar activity, but small during high solar activity. More than 25-years or two solar cycle has passed since his finding, but the relationship still holds. In order to get an insight into the mechanism of the solar modulation of the El Niño Southern Oscillation (ENSO), here we have revisited this problem. Solar cycle modulation of the BO in the tropical SST is discernible since the end of the 19th centuries, but the amplitude modulation is particularly clear after 1960's. The composite analysis of the SST based on the amplitude of the BO during 1958-2012, indicates that the amplitude of BO is larger when the equatorial Pacific temperature anomalies are high in the central Pacific, but low in the eastern Pacific. Central Pacific anomalies extend to the northern hemisphere, while those in the central Pacific spread toward the southern hemisphere. In short, this anomalous SST pattern is similar to the El Niño modoki. In this connection, it should be noted that the solar signal in the tropical SST also exhibits a similar pattern. This suggests that the modulation of the ENSO variability by the solar cycle originates through a modulation of the El Niño Modoki rather than the canonical El Nino.

Suppression of high-frequency perturbations in pulse-width modulation

DEFF Research Database (Denmark)

2008-01-01

A method suppresses high-frequency perturbations in a pulse-width modulated signal. The pulse-width modulation may superpose a carrier signal onto an input signal having a predetermined modulation frequency. The carrier signals may be phase-shifted. The resulting modulated signals may...

47 CFR 2.1047 - Measurements required: Modulation characteristics.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 1 2010-10-01 2010-10-01 false Measurements required: Modulation characteristics. 2.1047 Section 2.1047 Telecommunication FEDERAL COMMUNICATIONS COMMISSION GENERAL FREQUENCY... Certification § 2.1047 Measurements required: Modulation characteristics. (a) Voice modulated communication...

Tuning of Human Modulation Filters Is Carrier-Frequency Dependent

Science.gov (United States)

Simpson, Andrew J. R.; Reiss, Joshua D.; McAlpine, David

2013-01-01

Recent studies employing speech stimuli to investigate ‘cocktail-party’ listening have focused on entrainment of cortical activity to modulations at syllabic (5 Hz) and phonemic (20 Hz) rates. The data suggest that cortical modulation filters (CMFs) are dependent on the sound-frequency channel in which modulations are conveyed, potentially underpinning a strategy for separating speech from background noise. Here, we characterize modulation filters in human listeners using a novel behavioral method. Within an ‘inverted’ adaptive forced-choice increment detection task, listening level was varied whilst contrast was held constant for ramped increments with effective modulation rates between 0.5 and 33 Hz. Our data suggest that modulation filters are tonotopically organized (i.e., vary along the primary, frequency-organized, dimension). This suggests that the human auditory system is optimized to track rapid (phonemic) modulations at high sound-frequencies and slow (prosodic/syllabic) modulations at low frequencies. PMID:24009759

Symmetry, phase modulation and nonlinear waves

CERN Document Server

Bridges, Thomas J

2017-01-01

Nonlinear waves are pervasive in nature, but are often elusive when they are modelled and analysed. This book develops a natural approach to the problem based on phase modulation. It is both an elaboration of the use of phase modulation for the study of nonlinear waves and a compendium of background results in mathematics, such as Hamiltonian systems, symplectic geometry, conservation laws, Noether theory, Lagrangian field theory and analysis, all of which combine to generate the new theory of phase modulation. While the build-up of theory can be intensive, the resulting emergent partial differential equations are relatively simple. A key outcome of the theory is that the coefficients in the emergent modulation equations are universal and easy to calculate. This book gives several examples of the implications in the theory of fluid mechanics and points to a wide range of new applications.

Instant node package module

CERN Document Server

Ali, Juzer

2013-01-01

Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. A practical exploration of the lifecycle of creating node modules as well as learning all of the top features that npm has to offer.Intended for readers who want to create their first node.js modules. The programming paradigm of JavaScript is not covered so a foundation in these concepts would be beneficial.

Constellation modulation - an approach to increase spectral efficiency.

Science.gov (United States)

Dash, Soumya Sunder; Pythoud, Frederic; Hillerkuss, David; Baeuerle, Benedikt; Josten, Arne; Leuchtmann, Pascal; Leuthold, Juerg

2017-07-10

Constellation modulation (CM) is introduced as a new degree of freedom to increase the spectral efficiency and to further approach the Shannon limit. Constellation modulation is the art of encoding information not only in the symbols within a constellation but also by encoding information by selecting a constellation from a set of constellations that are switched from time to time. The set of constellations is not limited to sets of partitions from a given constellation but can e.g., be obtained from an existing constellation by applying geometrical transformations such as rotations, translations, scaling, or even more abstract transformations. The architecture of the transmitter and the receiver allows for constellation modulation to be used on top of existing modulations with little penalties on the bit-error ratio (BER) or on the required signal-to-noise ratio (SNR). The spectral bandwidth used by this modulation scheme is identical to the original modulation. Simulations demonstrate a particular advantage of the scheme for low SNR situations. So, for instance, it is demonstrated by simulation that a spectral efficiency increases by up to 33% and 20% can be obtained at a BER of 10 -3 and 2×10 -2 for a regular BPSK modulation format, respectively. Applying constellation modulation, we derive a most power efficient 4D-CM-BPSK modulation format that provides a spectral efficiency of 0.7 bit/s/Hz for an SNR of 0.2 dB at a BER of 2 × 10 -2 .

Development of training modules for magnetic particle inspection

Science.gov (United States)

Kosaka, Daigo; Eisenmann, David J.; Enyart, Darrel; Nakagawa, Norio; Lo, Chester; Orman, David

2015-03-01

Magnetic particle inspection (MPI) is a nondestructive evaluation technique used with ferromagnetic materials. Although the application of this method may appear straightforward, MPI combines the complicated nature of electromagnetics, metallurgical material effects, fluid-particle motion dynamics, and physiological human factors into a single inspection. To fully appreciate industry specifications such as ASTM E-1444, users should develop a basic understanding of the many factors that are involved in MPI. We have developed a series of MPI training modules that are aimed at addressing this requirement. The modules not only offer qualitative explanations, but also show quantitative explanations in terms of measurement and numerical simulation data in many instances. There are five modules in all. Module ♯1 shows characteristics of waveforms and magnetizing methods. This allows MPI practitioners to make optimum choice of waveform and magnetizing method. Module ♯2 explains how material properties relate to the magnetic characteristics. Module ♯3 shows the strength of the excitation field or the flux leakage from a crack and how it compares to the detectability of a crack by MPI. Module ♯4 shows how specimen status may influence defect detection. Module ♯5 shows the effects of particle properties on defect detection.

Modelling PV modules' performance in Sahelian climates

Energy Technology Data Exchange (ETDEWEB)

Diarra, D.C.; Akuffo, F.O. [Kwame Nkrumah Univ. of Science and Technology, Kumasi (Ghana). Dept. of Mechanical Engineering

2003-08-01

This paper describes the development of a thermo-optical model designed to evaluate the temperature of a photovoltaic (PV) module in an effort to design a cost-effective cooling system for PV modules operating under high ambient temperatures. The power output of a PV module is greatly reduced when its temperature rises. This loss in efficiency is particularly significant in Sahelian regions where PV modules are subjected to high solar radiation intensities and high ambient temperatures. The newly developed thermo-optical model confirms that most of the heat in a PV module is generated in the solar cell. The results of the analysis include: the optical absorption, reflection and transmission of the solar radiation incident on the module; the temperature distribution in the module; and, the heat transfer through the top and bottom of the module. At incidence angles of 60 degrees, approximately three-quarters of the heat is generated in the solar cell. The optical efficiency is 88.44 per cent at normal incidence angle and 82.48 per cent when the incidence angle is 60 degrees. It was determined that the cooling system should be located as close as possible to the solar cell in order to increase the thermal heat flow from the cell. 4 refs., 3 tabs., 4 figs.

Rate adaptive multilevel coded modulation with high coding gain in intensity modulation direct detection optical communication

Science.gov (United States)

Xiao, Fei; Liu, Bo; Zhang, Lijia; Xin, Xiangjun; Zhang, Qi; Tian, Qinghua; Tian, Feng; Wang, Yongjun; Rao, Lan; Ullah, Rahat; Zhao, Feng; Li, Deng'ao

2018-02-01

A rate-adaptive multilevel coded modulation (RA-MLC) scheme based on fixed code length and a corresponding decoding scheme is proposed. RA-MLC scheme combines the multilevel coded and modulation technology with the binary linear block code at the transmitter. Bits division, coding, optional interleaving, and modulation are carried out by the preset rule, then transmitted through standard single mode fiber span equal to 100 km. The receiver improves the accuracy of decoding by means of soft information passing through different layers, which enhances the performance. Simulations are carried out in an intensity modulation-direct detection optical communication system using MATLAB®. Results show that the RA-MLC scheme can achieve bit error rate of 1E-5 when optical signal-to-noise ratio is 20.7 dB. It also reduced the number of decoders by 72% and realized 22 rate adaptation without significantly increasing the computing time. The coding gain is increased by 7.3 dB at BER=1E-3.

The impact of module morphologies on modular robots

DEFF Research Database (Denmark)

Liu, Ceyue; Liu, Jiangong; Moreno Garcia, Rodrigo

2017-01-01

RGE, and defined the number of connection faces and their relative positions as morphological parameters. Afterwards, we evolved the morphology and control of robots composed of EMeRGE modules in a robotic simulation platform. Simulation results indicate that robots containing modules with only two available......Many different types of modular robots have been designed in the last two decades. However, limited research has been done on analyzing which module morphology is able to create better robots for a given task. To address this issue, this paper investigates how the number and position of available...... connection faces in a module influence the evolvability of the modular robot. In contrast to previous research on modular robots, an analysis of the morphology of the module is done in order to improve and simplify its mechanical design. To this end, we designed a homogeneous module called EMe...

1995 second modulator-klystron workshop: A modulator-klystron workshop for future linear colliders

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

This second workshop examined the present state of modulator design and attempted an extrapolation for future electron-positron linear colliders. These colliders are currently viewed as multikilometer-long accelerators consisting of a thousand or more RF sources with 500 to 1,000, or more, pulsed power systems. The workshop opened with two introductory talks that presented the current approaches to designing these linear colliders, the anticipated RF sources, and the design constraints for pulse power. The cost of main AC power is a major economic consideration for a future collider, consequently the workshop investigated efficient modulator designs. Techniques that effectively apply the art of power conversion, from the AC mains to the RF output, and specifically, designs that generate output pulses with very fast rise times as compared to the flattop. There were six sessions that involved one or more presentations based on problems specific to the design and production of thousands of modulator-klystron stations, followed by discussion and debate on the material.

2D Finite Element Model of a CIGS Module

Energy Technology Data Exchange (ETDEWEB)

Janssen, G.J.M.; Slooff, L.H.; Bende, E.E. [ECN Solar Energy, P.O.Box 1, NL-1755 ZG Petten (Netherlands)

2012-06-15

The performance of thin-film CIGS (Copper indium gallium selenide) modules is often limited due to inhomogeneities in CIGS layers. A 2-dimensional Finite Element Model for CIGS modules is presented that predicts the impact of such inhomogeneities on the module performance. Results are presented of a module with a region of poor diode characteristics. It is concluded that according to this model the effects of poor diodes depend strongly on their location in the module and on their dispersion over the module surface. Due to its generic character the model can also be applied to other series connections of photovoltaic cells.

2D - Finite element model of a CIGS module

Energy Technology Data Exchange (ETDEWEB)

Janssen, G.J.M.; Slooff, L.H.; Bende, E.E. [ECN Solar Energy, Petten (Netherlands)

2012-09-15

The performance of thin-film CIGS modules is often limited due to inhomogeneities in CIGS layers. A 2-dimensional Finite Element Model for CIGS modules is demonstrated that predicts the impact of such inhomogeneities on the module performance. Results are presented of a module with a region of poor diode characteristics. It is concluded that according to this model the effects of poor diodes depend strongly on their location in the module and on their dispersion over the module surface. Due to its generic character the model can also be applied to other series connections of photovoltaic cells.