WorldWideScience

Sample records for modification technologies xiii

  1. XIII International science and technology conference High-tech chemical technologies-2010 with elements of Scientific school for young people Innovations in chemistry: achievements and prospects. Summaries of reports

    International Nuclear Information System (INIS)

    2010-01-01

    Materials of the XIII International science and technology conference High-tech chemical technologies-2010 with elements of Scientific school for young people Innovations in chemistry: achievements and prospects (29 June-2 July 2010, Ivanovo) are presented. During the conference the following areas: theoretical aspects of chemical technology; technology of deep oil refining and the production of organic substances; technology of drugs and biologically active substances; technology of inorganic materials, polymers and composites based on them - the technological principles and methods of synthesis, modification, and processing; environmental and economic problems of chemical technologies and their solutions are considered [ru

  2. A,B-indolosteroids. XIII. New modification of the steroid aglycone of solasodine

    International Nuclear Information System (INIS)

    Gutnik, S.B.; Shner, V.F.; Kuleshova, L.N.; Suvorov, N.N.

    1986-01-01

    A new modification of the steroid skeleton of the solasodine aglycone was realized; compounds of the A-nor-3-azaspirosolane series with an unsubstituted position 28 were obtained. The properties of the synthesized heterocyclic analogs of solasodine were studied

  3. Energy conservation potential of surface modification technologies

    Energy Technology Data Exchange (ETDEWEB)

    Le, H.K.; Horne, D.M.; Silberglitt, R.S.

    1985-09-01

    This report assesses the energy conservation impact of surface modification technologies on the metalworking industries. The energy conservation impact of surface modification technologies on the metalworking industries is assessed by estimating their friction and wear tribological sinks and the subsequent reduction in these sinks when surface modified tools are used. Ion implantation, coatings, and laser and electron beam surface modifications are considered.

  4. Application of radiation technology in starch modification

    International Nuclear Information System (INIS)

    Chen Huiyuan; Peng Zhigang; Ding Zhongmin; Lu Jiajiu

    2007-01-01

    In order to commercialize the radiation modification of starch, corn starch was irradiated with different dose of 60 Co gamma radiations. Some basic physical and chemical properties of the resulted modified starch paste were measured with emphasis on the viscosity stability and tensile strength. The results indicate that irradiation of corn starch with a dose of 4-10 kGy can decrease its viscosity to 5-14 mPa·s, and the tensile strength can meet the standard set up for textile paste. In comparison with chemical modification for starch, radiation modification is simpler in technology, more convenient in operation, more stable in modification quality, and easier to control. The mechanism of radiation modification of starch was also discussed. (authors)

  5. Venezuela-MEM/USA-DOE Fossil Energy Report XIII-1, Supporting Technology for Enhanced Oil Recovery, Microbial EOR; FINAL

    International Nuclear Information System (INIS)

    Ziritt, Jose Luis

    1999-01-01

    The results from Annex XIII of the Cooperative Agreement between the United States Department of Energy (DOE) and the Ministry of Energy and Mines of the Republic of Venezuela (MEMV) have been documented and published with many researchers involved. Integrate comprehensive research programs in the area of Microbial Enhanced Oil Recovery (MEOR) ranged from feasibility laboratory studies to full-scale multi-well field pilots. The objective, to cooperate in a technical exchange of ideas and information was fully met throughout the life of the Annex. Information has been exchanged between the two countries through published reports and technical meetings between experts in both country's research communities. The meetings occurred every two years in locations coincident with the International MEOR conferences and workshops sponsored by DOE (June 1990, University of Oklahoma, September 1992, Brookhaven, September 1995, National Institute of Petroleum and Energy Research). Reports and publications produced during these years are listed in Appendix B. Several Annex managers have guided the exchange through the years. They included Luis Vierma, Jose Luis Zirritt, representing MEMV and E. B. Nuckols, Edith Allison, and Rhonda Lindsey, representing the U.S. DOE. Funding for this area of research remained steady for a few years but decreased in recent years. Because both countries have reduced research programs in this area, future exchanges on this topic will occur through ANNEX XV. Informal networks established between researchers through the years should continue to function between individuals in the two countries

  6. Venezuela-MEM/USA-DOE Fossil Energy Report XIII-1, Supporting Technology for Enhanced Oil Recovery, Microbial EOR

    Energy Technology Data Exchange (ETDEWEB)

    Ziritt, Jose Luis

    1999-11-03

    The results from Annex XIII of the Cooperative Agreement between the United States Department of Energy (DOE) and the Ministry of Energy and Mines of the Republic of Venezuela (MEMV) have been documented and published with many researchers involved. Integrate comprehensive research programs in the area of Microbial Enhanced Oil Recovery (MEOR) ranged from feasibility laboratory studies to full-scale multi-well field pilots. The objective, to cooperate in a technical exchange of ideas and information was fully met throughout the life of the Annex. Information has been exchanged between the two countries through published reports and technical meetings between experts in both country's research communities. The meetings occurred every two years in locations coincident with the International MEOR conferences & workshops sponsored by DOE (June 1990, University of Oklahoma, September 1992, Brookhaven, September 1995, National Institute of Petroleum and Energy Research). Reports and publications produced during these years are listed in Appendix B. Several Annex managers have guided the exchange through the years. They included Luis Vierma, Jose Luis Zirritt, representing MEMV and E. B. Nuckols, Edith Allison, and Rhonda Lindsey, representing the U.S. DOE. Funding for this area of research remained steady for a few years but decreased in recent years. Because both countries have reduced research programs in this area, future exchanges on this topic will occur through ANNEX XV. Informal networks established between researchers through the years should continue to function between individuals in the two countries.

  7. [Factor XIII deficiency in burns].

    Science.gov (United States)

    Burkhardt, H; Zellner, P R; Möller, I

    1977-08-01

    In 34 patients with severe burn injuries platelets, fibrinogen, prothrombin time, partial thromboplastin time, thrombin time and factor XIII were measured daily. Half of the patients were administered 15 000 IE of heparin per 24 hours. In the first 4 days there was a rapid fall of factor XIII to a value of approximately 30%. Values remained very low during the whole observation period of up to 20 days. However, in patients treated with heparin, values tended to be 10--15% higher. After an initial decline on the tenth day, the platelets had risen to the lowest normal level. Platelets were identical in both groups. The causes for the changes in these haemostasis parameters, their significance, and possible consequences of therapy are discussed.

  8. Modifications of allergenicity linked to food technologies.

    Science.gov (United States)

    Moneret-Vautrin, D A

    1998-01-01

    The prevalence of food allergies (FA) has increased over the past fifteen years. The reasons suggested are changes in dietary behaviour and the evolution of food technologies. New cases of FA have been described with chayote, rambutan, arguta, pumpkin seeds, custard apple, and with mycoproteins from Fusarium.... Additives using food proteins are at high risk: caseinates, lysozyme, cochineal red, papaïn, alpha-amylase, lactase etc. Heating can reduce allergenicity or create neo-allergens, as well as storage, inducing the synthesis of allergenic stress or PR proteins. Aeroallergens (miles, moulds) contaminate foods and can induce allergic reactions. Involuntary contamination by peanut proteins on production lines is a problem which is not yet solved. Genetically modified plants are at risk of allergenicity, requiring methodological steps of investigations: the comparison of the amino-acid sequence of the transferred protein with the sequence of known allergens, the evaluation of thermo degradability and of the denaturation by pepsin and trypsin are required, as well as the study with sera from patients allergic to the plant producing the gene. The combination of enzymatic hydrolysis, heating, or the development of genetically modified plants may offer new alternatives towards hypoallergenic foods (57 references).

  9. Potential benefits of genetic modification (GM) technology for food ...

    African Journals Online (AJOL)

    We assessed the perception of farmers towards potential adoption of genetic modification (GM) technology for improving health, food security and agricultural productivity using a semi-structured interview. A total sample of 54 small-scale farmers participated in 6 focus group meetings (FGMs) and 23 in-depth interviews at ...

  10. Plasma assisted surface coating/modification processes: An emerging technology

    Science.gov (United States)

    Spalvins, T.

    1986-01-01

    A broad understanding of the numerous ion or plasma assisted surface coating/modification processes is sought. An awareness of the principles of these processes is needed before discussing in detail the ion nitriding technology. On the basis of surface modifications arising from ion or plasma energizing and interactions, it can be broadly classified as deposition of distinct overlay coatings (sputtering-dc, radio frequency, magnetron, reactive; ion plating-diode, triode) and surface property modification without forming a discrete coating (ion implantation, ion beam mixing, laser beam irradiation, ion nitriding, ion carburizing, plasma oxidation). These techniques offer a great flexibility and are capable in tailoring desirable chemical and structural surface properties independent of the bulk properties.

  11. Plasma assisted surface coating/modification processes - An emerging technology

    Science.gov (United States)

    Spalvins, T.

    1987-01-01

    A broad understanding of the numerous ion or plasma assisted surface coating/modification processes is sought. An awareness of the principles of these processes is needed before discussing in detail the ion nitriding technology. On the basis of surface modifications arising from ion or plasma energizing and interactions, it can be broadly classified as deposition of distinct overlay coatings (sputtering-dc, radio frequency, magnetron, reactive; ion plating-diode, triode) and surface property modification without forming a discrete coating (ion implantation, ion beam mixing, laser beam irradiation, ion nitriding, ion carburizing, plasma oxidation. These techniques offer a great flexibility and are capable in tailoring desirable chemical and structural surface properties independent of the bulk properties.

  12. Enzyme Technology of Peroxidases: Immobilization, Chemical and Genetic Modification

    Science.gov (United States)

    Longoria, Adriana; Tinoco, Raunel; Torres, Eduardo

    An overview of enzyme technology applied to peroxidases is made. Immobilization on organic, inorganic, and hybrid supports; chemical modification of amino acids and heme group; and genetic modification by site-directed and random mutagenesis are included. Different strategies that were carried out to improve peroxidase performance in terms of stability, selectivity, and catalytic activity are analyzed. Immobilization of peroxidases on inorganic and organic materials enhances the tolerance of peroxidases toward the conditions normally found in many industrial processes, such as the presence of an organic solvent and high temperature. In addition, it is shown that immobilization helps to increase the Total Turnover Number at levels high enough to justify the use of a peroxidase-based biocatalyst in a synthesis process. Chemical modification of peroxidases produces modified enzymes with higher thermostability and wider substrate variability. Finally, through mutagenesis approaches, it is possible to produce modified peroxidases capable of oxidizing nonnatural substrates with high catalytic activity and affinity.

  13. Genetics Home Reference: factor XIII deficiency

    Science.gov (United States)

    ... XIII deficiency tend to have heavy or prolonged menstrual bleeding (menorrhagia) and may experience recurrent pregnancy losses ( ... inheritance, which means that it results when both copies of either the F13A1 gene or the F13B ...

  14. Modification of Wastewater Treatment Technology at Cottonseed Oil Plant

    Directory of Open Access Journals (Sweden)

    Alshabab Mary Shick

    2016-01-01

    Full Text Available Wastewaters from cottonseed oil producing plant in Syria were studied in laboratory experiments. Aim of the study was to suggest modification of wastewater treatment technology in order to increase its efficiency. Concentration of pollutants in wastewaters was controlled by measurement of COD. According to the results of experiments it was suggested to decrease significantly (8-20 times dosages of reagents (acidifier, coagulant, flocculant in several actual stages of treatment (acidification, separation, coagulation and sedimentation and add stage of dispersed air flotation before coagulation treatment. The modified wastewater treatment technology would reduce COD to the values allowed for irrigation waters by Syrian National Standard.

  15. XIII International Workshop on Hadron Physics

    CERN Document Server

    2015-01-01

    The XIII International Workshop on Hadron Physics, XIII Hadron Physics, is intended for graduate students, postdocs and researchers in Hadronic Physics, High Energy Physics, Astrophysics and Effective Field Theories, who wish to improve their theoretical background, learn about recent experimental results and develop collaboration projects. The series Hadron Physics, in activity since 1988, has the format of an advanced school and has the objective to introduce, in a series of pedagogical lectures, new lines of research in Strong Interaction Physics, mainly concerned with QCD. It envisages also to stimulate collaborations in international level.

  16. Tissue regenerating functions of coagulation factor XIII

    DEFF Research Database (Denmark)

    Soendergaard, C; Kvist, P H; Seidelin, J B

    2013-01-01

    The protransglutaminase factor XIII (FXIII) has recently gained interest within the field of tissue regeneration, as it has been found that FXIII significantly influences wound healing by exerting a multitude of functions. It supports haemostasis by enhancing platelet adhesion to damaged......-receptor 2 and the αVβ3 integrin is important for angiogenesis supporting formation of granulation tissue. Chronic inflammatory conditions involving bleeding and activation of the coagulation cascade have been shown to lead to reduced FXIII levels in plasma. Of particular importance for this review...

  17. Government and technological innovation - Weather modification as a case in point.

    Science.gov (United States)

    Lambright, W. H.

    1972-01-01

    The principal technology on which all forms of intentional, local weather modification ultimately rest is that of cloud seeding. There are three primary milestones in the evolution of such a new technology including invention, development, and introduction to society on an operational basis. It is shown that government has been deeply involved in each of the first two phases of weather modification's evolution. The agencies involved include the military agencies, the Weather Bureau, the National Science Foundation, and the Bureau of Reclamation. It is pointed out that weather modification will require some unusually flexible and open administrative devices if it is to advance in the public interest.

  18. JOYO modification program for demonstration tests of FBR innovative technology development

    International Nuclear Information System (INIS)

    Yoshimi, H.; Hachiya, Y.

    1990-01-01

    A plan is under way at PNC to modify the experimental fast reactor JOYO. The project is called MARK-III (MK-III) program. The purpose of MK-III is to expand the function of JOYO, and to make it possible to receive demonstration tests of new or high level technologies for FBR development. The MK-III program consists of two main modifications: conversion to a highly efficient irradiation facility; and a modification for demonstration testing of new technologies and concepts that have a high potential to reduce FBR plant construction cost, to evaluate plant reliability and to improve plant safety. These modifications are scheduled to start in 1991

  19. The Effects of Technological Modifications on the Fermentation of ...

    African Journals Online (AJOL)

    ... load of borde from all the above treatments. It was found possible to shorten the duration and simplify the technology of borde fermentation with some variations in acceptability. Key Words: food processing; traditional fermentation; cereal beverage, borde; Ethiopia Journal of Food Technology in Africa Vol.9(1) 2004: 3-12 ...

  20. The Effects of Technological Modifications on the Fermentation of ...

    African Journals Online (AJOL)

    Journal of Food Technology in Africa. Journal Home · ABOUT · Advanced Search · Current Issue · Archives · Journal Home > Vol 9, No 1 (2004) >. Log in or Register to get access to full text downloads.

  1. Classical elements in the endowments of Serbian XIII century donors

    OpenAIRE

    Gligorijević-Maksimović Mirjana

    2009-01-01

    In Byzantine painting, starting from the XIII and particularly during the XIV century, there was a visible return to models from the period of Antiquity. The influences of ancient, ostensibly, Hellenistic heritage were reflected in the shapes, in the content of the compositions, as well as in the drawing, modellation and colours. In the art that came into being in the course of the XIII century, in the endowments of the Serbian donors numerous elements emerged that had existed in ancient art....

  2. Factor concentrates for the treatment of factor XIII deficiency.

    Science.gov (United States)

    Gootenberg, J E

    1998-11-01

    Factor XIII deficiency is a severe autosomal recessive bleeding disorder associated with a characteristic pattern of neonatal hemorrhage and a lifelong bleeding diathesis. Even relatively minor trauma can be followed by prolonged and recurrent bleeding. Intracranial hemorrhage is a frequent complication. With the development of safe and effective factor XIII concentrates, reliable prophylactic treatment is possible. Two plasma-derived, virus-inactivated factor XIII concentrates are currently in production. The first, Fibrogammin P, (Centeon LLC, King of Prussia, PA, USA; and Centeon Pharma GmbH, Marburg, Germany) is marketed in Europe, South America, South Africa, and Japan. It is distributed in the United States under a Food and Drug Administration Investigational New Drug Application. A second factor XIII concentrate (Bio Products Laboratory, Elstree, UK) is available for use only on a "named patient" compassionate basis in the United Kingdom. Patients with factor XIII deficiency who receive appropriately timed periodic infusions of such factor XIII concentrates are able to live normal lives, free from catastrophic bleeding episodes.

  3. Immunologic applications of conditional gene modification technology in the mouse.

    Science.gov (United States)

    Sharma, Suveena; Zhu, Jinfang

    2014-04-02

    Since the success of homologous recombination in altering mouse genome and the discovery of Cre-loxP system, the combination of these two breakthroughs has created important applications for studying the immune system in the mouse. Here, we briefly summarize the general principles of this technology and its applications in studying immune cell development and responses; such implications include conditional gene knockout and inducible and/or tissue-specific gene over-expression, as well as lineage fate mapping. We then discuss the pros and cons of a few commonly used Cre-expressing mouse lines for studying lymphocyte development and functions. We also raise several general issues, such as efficiency of gene deletion, leaky activity of Cre, and Cre toxicity, all of which may have profound impacts on data interpretation. Finally, we selectively list some useful links to the Web sites as valuable mouse resources. Copyright © 2014 John Wiley & Sons, Inc.

  4. [Powder modification technology used for the preparation of the hydrophilic decoction pieces of indigo naturalis and the modification principle].

    Science.gov (United States)

    Zhang, Ding-Kun; Lin, Jun-Zhi; Liu, Jian-Yun; Qin, Chun-Feng; Guo, Zhi-Ping; Han, Li; Yang, Ming

    2013-07-01

    The hydrophilicity of the normal decoction pieces (NDP) of Indigo Naturalis is not good, therefore, it is not suit for decoctions. In this paper, powder modification technology is used and some NDP and alcohol are ground together in the vibromill to prepare the hydrophilic decoction pieces (HDP) of Indigo Naturalis. Initially, the properties of NDP, ultrafine decoction pieces (UDP) and HDP are compared, the hydrophilicity of UDP was promoted slightly, that of HDP is promoted dramatically. Then, three batches of Indigo Naturalis are prepared to HDP separately, but there is no obvious difference in the contact angle. Furthermore, the size distribution, surface area and micro-shape of HDP are bigger than that of UDP and smaller than NDP. The contents of indigo and indirubin in three decoction pieces are the same, as well as the species of inorganic substance, although there is a little difference in the proportion of five inorganic substances. The fact suggests the change of physical state and the qualitative and quantitative change of organism and inorganic substances are not the main factors to influence the hydrophilicity. In addition, hydroxyl, methylene and methyl can be identified at the wavenumber of 3 356 cm(-1) and 1 461 cm(-1) in infrared spectrum; the content of alcohol in HDP is 0.67% measured by gas chromatogram. The stability of HDP in the heating condition is studied, the fact suggests the hydrophilic effect of HDP at 40 degrees C is relatively stable. All above research suggests that the alcohol is the main factor to influence the hydrophilicity and maybe the intermolecular force which fixed alcohol molecule on the surface of Indigo Naturalis is the basic principle to produce the hydrophilicity.

  5. Evaluation of technology modifications required to apply clean coal technologies in Russian utilities. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    The report describes the following: overview of the Russian power industry; electric power equipment of Russia; power industry development forecast for Russia; clean coal technology demonstration program of the US Department of Energy; reduction of coal TPS (thermal power station) environmental impacts in Russia; and base options of advanced coal thermal power plants. Terms of the application of clean coal technology at Russian TPS are discussed in the Conclusions.

  6. Factor xiii deficiency in children-clinical presentation and outcome

    International Nuclear Information System (INIS)

    Fadoo, Z.; Saleem, A.F.

    2008-01-01

    To determine the demographic features and clinical outcome of children with Factor XIII deficiency. Records of all hospitalized pediatric patients with discharge diagnosis of FXIII D, on the basis of factor XIII assay 5 mol/L urea test were retrospectively reviewed and abstracted on a pre-specified proforma. Demographic features, coagulation profile, family history and outcomes were noted. A total of 10 charts were reviewed. There were 5 boys and 5 girls. Almost all the children (9/10) were less than 5 years of age, out of whom 5 (50%) were infants, and 3 were neonates. Bruises and prolonged bleeding after trauma was the major presenting complaints in 80%, followed by prolonged bleeding from the umbilical stump in 2 patients. Nine patients had past history of prolonged umbilical bleeding. Two patients had history of FXIII D in siblings, while 2 had history of prolonged bleeding in other family members (cause unknown). Consanguinity was present in 80% of the families. Initial coagulation screen were normal in all patients. Two patients had intracranial hemorrhage, proved on neuro-imaging, were managed with plasma infusions and required craniotomy. The rest were managed conservatively with plasma transfusions. All were discharged alive in good clinical condition. Almost all were followed regularly in clinic with monthly cryoprecipitate transfusions. Although factor XIII deficiency is a rare genetic disorder in children with history of bruising, prolonged umbilical bleeding, family history of bleeding and consanguinity with normal initial coagulation screen (PT, APTT and platelets), FXIII D should be ruled out. (author)

  7. Japanese contributions to IAEA INTOR workshop, phase two A, part 2, chapter XI: concept evolution, chapter XII: design concept, and chapter XIII: operation and test programme

    International Nuclear Information System (INIS)

    Tomabechi, Ken; Fujisawa, Noboru; Iida, Hiromasa

    1985-07-01

    This report corresponds to Chapters XI, XII, and XIII of Japanese contribution report to IAEA INTOR Workship, Phase Two A, Part 2. In the phase Two A, Part 2 workshop, we have studied critical technical issues and have also assessed scientific and technical data bases. Based on those results, the INTOR design have been modified to upgrade the design concept. The major modification items are related to plasma beta value, plasma operation scenario, reactor size reduction, neutron fluence, tritium producing blanket, and implementation of active control coils. In those chapters, the concept evolution for the design modification and main results are described. (author)

  8. Application of plasma technology for the modification of polymer and textile materials

    Directory of Open Access Journals (Sweden)

    Radetić Maja M.

    2004-01-01

    Full Text Available Plasma treatment is based on the physico-chemical changes of the material surface and as an ecologically and economically acceptable process it can be an attractive alternative to conventional modifications. The possibilities of plasma technology application to the modification of polymer and textile materials are discussed. Different specific properties of the material can be achieved by plasma cleaning, etching, functionalization or polymerization. The final effects are strongly influenced by the treatment parameters (treatment time, pressure, power, gas flow, the applied gas and nature of the material. The plasma treatment of polymers is predominantly focused on cleaning and activation of the surfaces to increase adhesion, binding, wettability, dye ability and printability. Current studies deal more with plasma polymerization where an ultra thin film of plasma polymer is deposited on the material surface and, depending on the applied monomer, different specific properties can be obtained (i.e. chemical and thermal resistance, abrasion resistance, antireflexion, water repellence, etc.. Plasma application to textiles is mostly oriented toward wool and synthetic fibres, though some studies also consider cotton, hemp, flax and silk. The main goal of plasma treatment is to impart a more hydrophilic fibre surface and accordingly increase wettability, dye ability, printability and particularly, shrink resistance in the case of wool. Recent studies have favored technical textiles, where plasma polymerization can offer a wide range of opportunities.

  9. Electron beam processing technology for modification of different types of cellulose pulps for production of derivatives

    International Nuclear Information System (INIS)

    Iller, E.; Kukielka, A.; Mikolajczyk, W.; Starostka, P.; Stupinska, H.

    2002-01-01

    Institute of Nuclear Chemistry and Technology, Pulp and Paper Research Institute and Institute of Chemical Fibers carry out a joint research project in order to develop the radiation methods modification of cellulose pulps for production of cellulose derivatives such as carbamate (CC), carboxymethyl cellulose (CMC) and methylcellulose (MC). Three different types of textile pulps: Alicell (A); Borregaard (B), Ketchikan (K) and Kraft softwood (PSS) and hardwood (PSB) pulps have been irradiated with 10 MeV electron beam from LAE 13/9 linear accelerator with doses of 5, 10, 15, 20, 25 and 50 kGy. After electron beam treatment the samples of cellulose pulps have been examined by using of structural and physico-chemical methods. Electron paramagnetic resonance spectroscopy (EPR), gel permeation chromatography (GPC) and infrared spectroscopy (IRS) were applied for determination of structural changes in irradiated cellulose pulps. By means of analytical methods, such parameters as: viscosity, average degree of polymerization (DP) and α-cellulose contents were evaluated. Based on EPR and GPC investigations the relationship between concentrations of free radicals and decreasing polymerization degrees in electron beam treatment pulps has been confirmed. The carboxymethylcellulose, methylcellulose and cellulose carbamate were prepared using the raw material of radiation modified pulps. Positive results of investigations will allow for determination of optimum conditions for electron beam modification of selected cellulose paper and textile pulps. Such procedure leads to limit the amounts of chemical activators used in methods for preparation cellulose derivatives. The proposed electron beam technology is new approaches in technical solution and economic of process of cellulose derivatives preparation. (author)

  10. 40 CFR Appendix Xiii to Part 266 - Mercury Bearing Wastes That May Be Processed in Exempt Mercury Recovery Units

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 26 2010-07-01 2010-07-01 false Mercury Bearing Wastes That May Be Processed in Exempt Mercury Recovery Units XIII Appendix XIII to Part 266 Protection of Environment... XIII to Part 266—Mercury Bearing Wastes That May Be Processed in Exempt Mercury Recovery Units These...

  11. The hydrophobic modification of gypsum binder by peat products: physico-chemical and technological basis

    Directory of Open Access Journals (Sweden)

    O. Misnikov

    2018-04-01

    Full Text Available Gypsum binder is a quick-setting and fast-hardening material that is used widely in the construction industry for plastering and as an ingredient of concrete, other binding materials, etc. The issue addressed here is its short shelf life (around three months which arises because it is hygroscopic, i.e. it readily absorbs moisture and begins to set during transport and storage. The main methods that are currently available for protecting gypsum binder against unwanted exposure to moisture and water vapour are considered, and hydrophobic modification with the bitumen released during peat thermolysis (a method previously considered for cement is proposed as a promising alternative. Because there is overlap in the temperature ranges used in the manufacture of gypsum binder and those required for the initial stages of thermal decomposition of the organic matter in peat, it is expected that hydrophobisation could be achieved during the established manufacturing process without any changes to plant or procedures. The optimum concentration of organic (peat additive for gypsum rock mined from the Shushokskoye deposit in Russia is derived experimentally. With 0.5–1 % of peat additive, the strength grading of the gypsum plaster is preserved and its storage time without caking and hydration increases, even under adverse conditions (100 % relative humidity. The proposed method is compatible with current gypsum production technology, it does not require any changes in equipment, and the prices of mineral raw materials and semi-finished peat products are approximately the same. Thus, the incorporation of hydrophobic modification using peat into the manufacturing process for gypsum binder is unlikely to increase the cost of the product.

  12. Progress in ultrafast intense laser science XIII

    CERN Document Server

    III, Wendell; Paulus, Gerhard

    2017-01-01

    This thirteenth volume covers a broad range of topics from this interdisciplinary research field, focusing on atoms, molecules, and clusters interacting in intense laser field and high-order harmonics generation and their applications. The PUILS series delivers up-to-date reviews of progress in Ultrafast Intense Laser Science, the interdisciplinary research field spanning atomic and molecular physics, molecular science, and optical science, which has been stimulated by the recent developments in ultrafast laser technologies. Each volume compiles peer-reviewed articles authored by researchers at the forefront of each their own subfields of UILS. Every chapter opens with an overview of the topics to be discussed, so that researchers unfamiliar to the subfield, as well as graduate students, can grasp the importance and attractions of the research topic at hand; these are followed by reports of cutting-edge discoveries.   .

  13. Classical elements in the endowments of Serbian XIII century donors

    Directory of Open Access Journals (Sweden)

    Gligorijević-Maksimović Mirjana

    2009-01-01

    Full Text Available In Byzantine painting, starting from the XIII and particularly during the XIV century, there was a visible return to models from the period of Antiquity. The influences of ancient, ostensibly, Hellenistic heritage were reflected in the shapes, in the content of the compositions, as well as in the drawing, modellation and colours. In the art that came into being in the course of the XIII century, in the endowments of the Serbian donors numerous elements emerged that had existed in ancient art. In the frescoes in the Church of the Mother of God in Studenica, the endowment of Stefan Nemanja and his sons, we see personifications, symbols, the introduction of details, and space acquiring depth, features that were later to come to full expression, especially from the middle of the XIII century. The few preserved frescoes dating from the XIII century in the Church of the Resurrection in the Žiča monastery, the endowment of Stefan the First Crowned, his son Radoslav and his brother Sava, are an iconographic continuation of the trends in the art one encounters in Studenica. The frescoes in the Church of Christ's Ascension in Mileševa, the endowment of King Vladislav, with their subtly fashioned figures and carefully modelled faces, as well as refined colouring, signal a return to the Hellenistic models. The painting in the Church of Dormition of the Virgin in the Morača monastery, the endowment of Prince Stefan, nephew of king Stefan, with its well-proportioned, firmly modelled figures, landscapes and architecture deepening the space, reminds one of the Sopoćani frescoes. In the fresco painting of the Holy Apostles in Peć, the endowment of Archbishop Sava which owed its outcome to the efforts of Archbishop Arsenije I, the images are very vivid, and the painted architecture is depicted in an abbreviated form, using different kinds of perspective. The painting in the Church of the Holy Trinity in Sopoćani, the endowment of king Uroš I, represents

  14. Integration of microplasma and microfluidic technologies for localised microchannel surface modification

    Science.gov (United States)

    Szili, Endre J.; Al-Bataineh, Sameer A.; Priest, Craig; Gruner, Philipp J.; Ruschitzka, Paul; Bradley, James W.; Ralston, John; Steele, David A.; Short, Robert D.

    2011-12-01

    In this paper we describe the spatial surface chemical modification of bonded microchannels through the integration of microplasmas into a microfluidic chip (MMC). The composite MMC comprises an array of precisely aligned electrodes surrounding the gas/fluid microchannel. Pairs of electrodes are used to locally ignite microplasmas inside the microchannel. Microplasmas, comprising geometrically confined microscopic electrically-driven gas discharges, are used to spatially functionalise the walls of the microchannels with proteins and enzymes down to scale lengths of 300 μm inside 50 μm-wide microchannels. Microchannels in poly(dimethylsiloxane) (PDMS) or glass were used in this study. Protein specifically adsorbed on to the regions inside the PDMS microchannel that were directly exposed to the microplasma. Glass microchannels required pre-functionalisation to enable the spatial patterning of protein. Firstly, the microchannel wall was functionalised with a protein adhesion layer, 3-aminopropyl-triethoxysilane (APTES), and secondly, a protein blocking agent (bovine serum albumin, BSA) was adsorbed onto APTES. The functionalised microchannel wall was then treated with an array of spatially localised microplasmas that reduced the blocking capability of the BSA in the region that had been exposed to the plasma. This enabled the functionalisation of the microchannel with an array of spatially separated protein. As an alternative we demonstrated the feasibility of depositing functional thin films inside the MMC by spatially plasma depositing acrylic acid and 1,7-octadiene within the microchannel. This new MMC technology enables the surface chemistry of microchannels to be engineered with precision, which is expected to broaden the scope of lab-on-a-chip type applications.

  15. Tactic "Tulgama" the Art of War the Mongols XIII century

    Directory of Open Access Journals (Sweden)

    Leonid A. Bobrov

    2015-12-01

    Full Text Available In this publication, based on a comprehensive analysis of the sources, considered one of the most important tactics of the Mongols of the XIII century, known under the Turkic name "Tulgama". The name of the maneuver is derived from the Turkic verb "talamak", meaning "to surround, to wrapped up, to turn, to whirl, to twist". It is established that the maneuver "Tulgama" was a special tactic, providing coverage flank (flanks of the enemy in the rear and the application of massed archery shot in his builds. Selected three varieties under consideration tactic: right flank or left flank and steam room (double "Tulgama". The most typical was right flanks "Tulgama" when doing the nomads, covered the left wing of the enemy with its right flank. This allowed the attacking archers to fire from the most convenient position (left-forward, left, and left-back. A characteristic feature of the Mongol tactical art was a steam room (double "Tulgama" when the troops of nomads covered both enemy's flank, concluding the enemy's army in the ring, then attacked her from all four sides. A similar technique could not only shoot down from the position, but almost completely destroy the enemy troops. For the most efficient use of maneuver "Tulgama" the Mongols made increasing use of expanded mesalamines system, with a powerful thrust forward flank groups. The concentration of the shock troops on the flanks (reinforced, including by weakening the Central shelf is dramatically different from the tactics of the Mongols from the traditional tactics of the Turks, whose best part was typically the center of the combat formations. However, direct confrontation of these two approaches during the military campaigns of the XIII century demonstrated the advantages of the Mongol tactical schemes. High efficiency of reception "Tulgama" led to its continued existence in the military art of the nomads.

  16. [Factor XIII-guided treatment algorithm reduces blood transfusion in burn surgery].

    Science.gov (United States)

    Carneiro, João Miguel Gonçalves Valadares de Morais; Alves, Joana; Conde, Patrícia; Xambre, Fátima; Almeida, Emanuel; Marques, Céline; Luís, Mariana; Godinho, Ana Maria Mano Garção; Fernandez-Llimos, Fernando

    Major burn surgery causes large hemorrhage and coagulation dysfunction. Treatment algorithms guided by ROTEM ® and factor VIIa reduce the need for blood products, but there is no evidence regarding factor XIII. Factor XIII deficiency changes clot stability and decreases wound healing. This study evaluates the efficacy and safety of factor XIII correction and its repercussion on transfusion requirements in burn surgery. Randomized retrospective study with 40 patients undergoing surgery at the Burn Unit, allocated into Group A those with factor XIII assessment (n = 20), and Group B, those without assessment (n = 20). Erythrocyte transfusion was guided by a hemoglobin trigger of 10g.dL -1 and the other blood products by routine coagulation and ROTEM ® tests. Analysis of blood product consumption included units of erythrocytes, fresh frozen plasma, platelets, and fibrinogen. The coagulation biomarker analysis compared the pre- and post-operative values. Group A (with factor XIII study) and Group B had identical total body surface area burned. All patients in Group A had a preoperative factor XIII deficiency, whose correction significantly reduced units of erythrocyte concentrate transfusion (1.95 vs. 4.05, p = 0.001). Pre- and post-operative coagulation biomarkers were similar between groups, revealing that routine coagulation tests did not identify factor XIII deficiency. There were no recorded thromboembolic events. Correction of factor XIII deficiency in burn surgery proved to be safe and effective for reducing perioperative transfusion of erythrocyte units. Copyright © 2017 Sociedade Brasileira de Anestesiologia. Publicado por Elsevier Editora Ltda. All rights reserved.

  17. Identification of eight novel coagulation factor XIII subunit A mutations: implied consequences for structure and function.

    Science.gov (United States)

    Ivaskevicius, Vytautas; Biswas, Arijit; Bevans, Carville; Schroeder, Verena; Kohler, Hans Peter; Rott, Hannelore; Halimeh, Susan; Petrides, Petro E; Lenk, Harald; Krause, Manuele; Miterski, Bruno; Harbrecht, Ursula; Oldenburg, Johannes

    2010-06-01

    Severe hereditary coagulation factor XIII deficiency is a rare homozygous bleeding disorder affecting one person in every two million individuals. In contrast, heterozygous factor XIII deficiency is more common, but usually not associated with severe hemorrhage such as intracranial bleeding or hemarthrosis. In most cases, the disease is caused by F13A gene mutations. Causative mutations associated with the F13B gene are rarer. We analyzed ten index patients and three relatives for factor XIII activity using a photometric assay and sequenced their F13A and F13B genes. Additionally, structural analysis of the wild-type protein structure from a previously reported X-ray crystallographic model identified potential structural and functional effects of the missense mutations. All individuals except one were heterozygous for factor XIIIA mutations (average factor XIII activity 51%), while the remaining homozygous individual was found to have severe factor XIII deficiency (<5% of normal factor XIII activity). Eight of the 12 heterozygous patients exhibited a bleeding tendency upon provocation. The identified missense (Pro289Arg, Arg611His, Asp668Gly) and nonsense (Gly390X, Trp664X) mutations are causative for factor XIII deficiency. A Gly592Ser variant identified in three unrelated index patients, as well as in 200 healthy controls (minor allele frequency 0.005), and two further Tyr167Cys and Arg540Gln variants, represent possible candidates for rare F13A gene polymorphisms since they apparently do not have a significant influence on the structure of the factor XIIIA protein. Future in vitro expression studies of the factor XIII mutations are required to confirm their pathological mechanisms.

  18. Traditional and New Enhancing Human Cybernetic and Nanotechnological Body Modification Technologies: A Comparative Study of Roman Catholic and Transhumanist Ethical Approaches

    Science.gov (United States)

    Caligiuri, Michael J.

    Advances in cybernetic and nanotechnological body modifications currently allow for enhancements to human physical and mental function which exceed human species-based norms. This thesis examines body modification and human enhancement from two perspectives---Roman Catholicism and Transhumanism--- in order to contribute to bioethical deliberations regarding enhancement technologies. Roman Catholicism has a longstanding tradition of bioethical discourse, informing the healthcare directives of Roman Catholic institutions. Transhumanism is more recent movement that endorses body modifications and human enhancements as a means of individual betterment and social evolution. The thesis first considers definitions of human enhancement and levels of normalcy in connection to cybernetic and nanotechnological bionic implants, and outlines a series of criteria to assess a technology's potential bioethical acceptability: implantability, permanency, power, and public interaction. The thesis then describes Roman Catholicism's response to non-enhancing decorative body modifications (cosmetic surgeries, common decorative modifications such as tattoos and piercings, and uncommon modifications such as scarifications and brandings) in order to establish a basis for possible Roman Catholic responses to enhancing cybernetic and nanotechnological modifications. This is followed by an analysis from a Roman Catholic perspective of the major social issues brought forward by enhancement technologies: commodification, eugenics, vulnerability, and distributive justice. Turning to Transhumanism, the thesis describes the origins and philosophy of the movement, and then discusses the bioethical principles it advances with regard to human enhancement. The thesis concludes by locating points of convergence between Transhumanism and Roman Catholicism that could be the basis of more widely accepted ethical guidelines regarding modification technologies.

  19. Examining the Teaching of Science, and Technology and Engineering Content and Practices: An Instrument Modification Study

    Science.gov (United States)

    Love, Tyler S.; Wells, John G.; Parkes, Kelly A.

    2017-01-01

    A modified Reformed Teaching Observation Protocol (RTOP) (Piburn & Sawada, 2000) instrument was used to separately examine eight technology and engineering (T&E) educators' teaching of science, and T&E content and practices, as called for by the "Standards for Technological Literacy: Content for the Study of Technology"…

  20. Influence of Modification and Casting Technology on Structure of IN-713C Superalloy Castings

    Directory of Open Access Journals (Sweden)

    Binczyk F.

    2016-09-01

    Full Text Available The paper presents the results concerning impact of modification (volume and surface techniques, pouring temperature and mould temperature on stereological parameters of macrostructure in IN713C castings made using post-production scrap. The ability to adjust the grain size is one of the main issues in the manufacturing of different nickel superalloy castings used in aircraft engines. By increasing the grain size one can increase the mechanical properties, like diffusion creep resistance, in higher temperatures. The fine grained castings. on the other hand, have higher mechanical properties in lower temperatures and higher resistance to thermal fatigue. The test moulds used in this study, supplied by Pratt and Whitney Rzeszow, are ordinarily used to cast the samples for tensile stress testing. Volume modification was carried out using the patented filter containing cobalt aluminate. The macrostructure was described using the number of grains per mm2, mean grain surface area and shape index. Obtained results show strong relationship between the modification technique, pouring temperature and grain size. There was no significant impact of mould temperature on macrostructure.

  1. Machinability of Minor Wooden Species before and after Modification with Thermo-Vacuum Technology.

    Science.gov (United States)

    Sandak, Jakub; Goli, Giacomo; Cetera, Paola; Sandak, Anna; Cavalli, Alberto; Todaro, Luigi

    2017-01-28

    The influence of the thermal modification process on wood machinability was investigated with four minor species of low economic importance. A set of representative experimental samples was machined to the form of disks with sharp and dull tools. The resulting surface quality was visually evaluated by a team of experts according to the American standard procedure ASTM D-1666-87. The objective quantification of the surface quality was also done by means of a three dimensions (3D) surface scanner for the whole range of grain orientations. Visual assessment and 3D surface analysis showed a good agreement in terms of conclusions. The best quality of the wood surface was obtained when machining thermally modified samples. The positive effect of the material modification was apparent when cutting deodar cedar, black pine and black poplar in unfavorable conditions (i.e., against the grain). The difference was much smaller for an easy-machinability specie such as Italian alder. The use of dull tools resulted in the worst surface quality. Thermal modification has shown a very positive effect when machining with dull tools, leading to a relevant increment of the final surface smoothness.

  2. Seaweed Hydrocolloid Production: An Update on Enzyme Assisted Extraction and Modification Technologies

    DEFF Research Database (Denmark)

    Rhein-Knudsen, Nanna; Ale, Marcel Tutor; Meyer, Anne S.

    2015-01-01

    Agar, alginate, and carrageenans are high-value seaweed hydrocolloids, which are used as gelation and thickening agents in different food, pharmaceutical, and biotechnological applications. The annual global production of these hydrocolloids has recently reached 100,000 tons with a gross market......-made modifications of the hydrocolloids to obtain specific functionalities. This review provides an update of the detailed structural features of κ-, ι-, λ-carrageenans, agars, and alginate, and a thorough discussion of enzyme assisted extraction and processing techniques for these hydrocolloids....

  3. Induced mutation and epigenetics modification in plants for crop improvement by targeting CRISPR/Cas9 technology.

    Science.gov (United States)

    Khan, Muhammad Hafeez Ullah; Khan, Shahid U; Muhammad, Ali; Hu, Limin; Yang, Yang; Fan, Chuchuan

    2018-06-01

    Clustered regularly interspaced palindromic repeats associated protein Cas9 (CRISPR-Cas9), originally an adaptive immunity system of prokaryotes, is revolutionizing genome editing technologies with minimal off-targets in the present era. The CRISPR/Cas9 is now highly emergent, advanced, and highly specific tool for genome engineering. The technology is widely used to animal and plant genomes to achieve desirable results. The present review will encompass how CRISPR-Cas9 is revealing its beneficial role in characterizing plant genetic functions, genomic rearrangement, how it advances the site-specific mutagenesis, and epigenetics modification in plants to improve the yield of field crops with minimal side-effects. The possible pitfalls of using and designing CRISPR-Cas9 for plant genome editing are also discussed for its more appropriate applications in plant biology. Therefore, CRISPR/Cas9 system has multiple benefits that mostly scientists select for genome editing in several biological systems. © 2017 Wiley Periodicals, Inc.

  4. Biomimetic surface modification of polypropylene by surface chain transfer reaction based on mussel-inspired adhesion technology and thiol chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Niu, Zhijun; Zhao, Yang; Sun, Wei; Shi, Suqing, E-mail: shisq@nwu.edu.cn; Gong, Yongkuan

    2016-11-15

    Highlights: • Biomimetic surface modification of PP was successfully conducted by integrating mussel-inspired technology, thiol chemistry and cell outer membranes-like structures. • The resultant biomimetic surface exhibits good interface and surface stability. • The obvious suppression of protein adsorption and platelet adhesion is also achieved. • The residue thoil groups on the surface could be further functionalized. - Abstract: Biomimetic surface modification of polypropylene (PP) is conducted by surface chain transfer reaction based on the mussel-inspired versatile adhesion technology and thiol chemistry, using 2-methacryloyloxyethylphosphorylcholine (MPC) as a hydrophilic monomer mimicking the cell outer membrane structure and 2,2-azobisisobutyronitrile (AIBN) as initiator in ethanol. A layer of polydopamine (PDA) is firstly deposited onto PP surface, which not only offers good interfacial adhesion with PP, but also supplies secondary reaction sites (-NH{sub 2}) to covalently anchor thiol groups onto PP surface. Then the radical chain transfer to surface-bonded thiol groups and surface re-initiated polymerization of MPC lead to the formation of a thin layer of polymer brush (PMPC) with cell outer membrane mimetic structure on PP surface. X-ray photoelectron spectrophotometer (XPS), atomic force microscopy (AFM) and water contact angle measurements are used to characterize the PP surfaces before and after modification. The protein adsorption and platelet adhesion experiments are also employed to evaluate the interactions of PP surface with biomolecules. The results show that PMPC is successfully grafted onto PP surface. In comparison with bare PP, the resultant PP-PMPC surface exhibits greatly improved protein and platelet resistance performance, which is the contribution of both increased surface hydrophilicity and zwitterionic structure. More importantly, the residue thiol groups on PP-PMPC surface create a new pathway to further functionalize such

  5. Biomimetic surface modification of polypropylene by surface chain transfer reaction based on mussel-inspired adhesion technology and thiol chemistry

    International Nuclear Information System (INIS)

    Niu, Zhijun; Zhao, Yang; Sun, Wei; Shi, Suqing; Gong, Yongkuan

    2016-01-01

    Highlights: • Biomimetic surface modification of PP was successfully conducted by integrating mussel-inspired technology, thiol chemistry and cell outer membranes-like structures. • The resultant biomimetic surface exhibits good interface and surface stability. • The obvious suppression of protein adsorption and platelet adhesion is also achieved. • The residue thoil groups on the surface could be further functionalized. - Abstract: Biomimetic surface modification of polypropylene (PP) is conducted by surface chain transfer reaction based on the mussel-inspired versatile adhesion technology and thiol chemistry, using 2-methacryloyloxyethylphosphorylcholine (MPC) as a hydrophilic monomer mimicking the cell outer membrane structure and 2,2-azobisisobutyronitrile (AIBN) as initiator in ethanol. A layer of polydopamine (PDA) is firstly deposited onto PP surface, which not only offers good interfacial adhesion with PP, but also supplies secondary reaction sites (-NH 2 ) to covalently anchor thiol groups onto PP surface. Then the radical chain transfer to surface-bonded thiol groups and surface re-initiated polymerization of MPC lead to the formation of a thin layer of polymer brush (PMPC) with cell outer membrane mimetic structure on PP surface. X-ray photoelectron spectrophotometer (XPS), atomic force microscopy (AFM) and water contact angle measurements are used to characterize the PP surfaces before and after modification. The protein adsorption and platelet adhesion experiments are also employed to evaluate the interactions of PP surface with biomolecules. The results show that PMPC is successfully grafted onto PP surface. In comparison with bare PP, the resultant PP-PMPC surface exhibits greatly improved protein and platelet resistance performance, which is the contribution of both increased surface hydrophilicity and zwitterionic structure. More importantly, the residue thiol groups on PP-PMPC surface create a new pathway to further functionalize such

  6. A new technology to overcome the limits of HCCI engine through fuel modification

    International Nuclear Information System (INIS)

    Bahng, GunWoong; Jang, Dongsoon; Kim, Youngtae; Shin, Misoo

    2016-01-01

    Highlights: • Problems of HCCI engine can be overcome by adopting fuel modification. • Gasoline vapor with HHO gas showed drastic improvement of fuel efficiency. • Performance of single cylinder engine shows fuel efficiency more than double. - Abstract: The energy efficiency of internal combustion engine reached to about 30% only recently. To increase the efficiency, homogeneous charge compression ignition (HCCI) has been proposed, however, there is no available commercial engine yet. The main problem lies in the delayed heating rate in spite of fast reaction of homogeneous charged state of HCCI with excess air. To overcome this difficulty, a modification of fuel by vaporization of liquid gasoline with water electrolysis gas and air was adopted in order to warrant the fast and high temperature rise. Experiments were carried out with single cylinder engines supplied from the four different manufacturers. Experimental results show that fuel consumption was decreased by more than 50% compared to the case of supplying liquid fuel. It is believed it was due to the combined effects of the high and fast heating potential of water electrolysis gas together with the efficient turbulence mixing effect of vaporized fuel with excess air. By this method, the drawbacks caused by lean burn in the HCCI engine such as small power range can be overcome.

  7. Factor XIII as a modulator of plasma fibronectin alterations during experimental bacteremia.

    Science.gov (United States)

    Kiener, J L; Cho, E; Saba, T M

    1986-11-01

    Fibronectin is found in plasma as well as in association with connective tissue and cell surfaces. Depletion of plasma fibronectin is often observed in septic trauma and burned patients, while experimental rats often manifest hyperfibronectinemia with sepsis. Since Factor XIII may influence the rate of clearance and deposition of plasma fibronectin into tissues, we evaluated the temporal changes in plasma fibronectin and plasma Factor XIII following bacteremia and RE blockade in rats in an attempt to understand the mechanism leading to elevation of fibronectin levels in bacteremic rats, which is distinct from that observed with RE blockade. Clearance of exogenously administered fibronectin after bacteremia was also determined. Rats received either saline, Pseudomonas aeruginosa (1 X 10(9) organisms), gelatinized RE test lipid emulsion (50 mg/100 gm B.W.), or emulsion followed by Pseudomonas. Plasma fibronectin and Factor XIII were determined at 0, 2, 24, and 48 hours post-blockade or bacteremia. At 24 and 48 hr following bacteremia alone or bacteremia after RE blockade, there was a significant elevation (p less than 0.05) of plasma fibronectin and a concomitant decrease (p less than 0.05) of plasma factor XIII activity. Extractable tissue fibronectin from liver and spleen was also increased at 24 and 48 hours following R.E. blockade plus bacteremia. In addition, the plasma clearance of human fibronectin was significantly prolonged (p less than 0.05) following bacterial challenge. Infusion of activated Factor XIII (20 units/rat) during a period of hyperfibronectinemia (908.0 +/- 55.1 micrograms/ml) resulted in a significant (p less than 0.05) decrease in plasma fibronectin (548.5 +/- 49.9 micrograms/ml) within 30 min. Thus Factor XIII deficiency in rats with bacteremia may contribute to the elevation in plasma fibronectin by altering kinetics associated with the clearance of fibronectin from the blood.

  8. Extreme Ultraviolet Emission Lines of Iron Fe XI-XIII

    Science.gov (United States)

    Lepson, Jaan; Beiersdorfer, P.; Brown, G. V.; Liedahl, D. A.; Brickhouse, N. S.; Dupree, A. K.

    2013-04-01

    The extreme ultraviolet (EUV) spectral region (ca. 20--300 Å) is rich in emission lines from low- to mid-Z ions, particularly from the middle charge states of iron. Many of these emission lines are important diagnostics for astrophysical plasmas, providing information on properties such as elemental abundance, temperature, density, and even magnetic field strength. In recent years, strides have been made to understand the complexity of the atomic levels of the ions that emit the lines that contribute to the richness of the EUV region. Laboratory measurements have been made to verify and benchmark the lines. Here, we present laboratory measurements of Fe XI, Fe XII, and Fe XIII between 40-140 Å. The measurements were made at the Lawrence Livermore electron beam ion trap (EBIT) facility, which has been optimized for laboratory astrophysics, and which allows us to select specific charge states of iron to help line identification. We also present new calculations by the Hebrew University - Lawrence Livermore Atomic Code (HULLAC), which we also utilized for line identification. We found that HULLAC does a creditable job of reproducing the forest of lines we observed in the EBIT spectra, although line positions are in need of adjustment, and line intensities often differed from those observed. We identify or confirm a number of new lines for these charge states. This work was supported by the NASA Solar and Heliospheric Program under Contract NNH10AN31I and the DOE General Plasma Science program. Work was performed in part under the auspices of the Department of Energy by Lawrence Livermore National Laboratory under Contract DEAC52-07NA27344.

  9. A specific colorimetric assay for measuring transglutaminase 1 and factor XIII activities.

    Science.gov (United States)

    Hitomi, Kiyotaka; Kitamura, Miyako; Alea, Mileidys Perez; Ceylan, Ismail; Thomas, Vincent; El Alaoui, Saïd

    2009-11-15

    Transglutaminase (TGase) is an enzyme that catalyzes both isopeptide cross-linking and incorporation of primary amines into proteins. Eight TGases have been identified in humans, and each of these TGases has a unique tissue distribution and physiological significance. Although several assays for TGase enzymatic activity have been reported, it has been difficult to establish an assay for discriminating each of these different TGase activities. Using a random peptide library, we recently identified the preferred substrate sequences for three major TGases: TGase 1, TGase 2, and factor XIII. In this study, we use these substrates in specific tests for measuring the activities of TGase 1 and factor XIII.

  10. Seaweed hydrocolloid production: an update on enzyme assisted extraction and modification technologies.

    Science.gov (United States)

    Rhein-Knudsen, Nanna; Ale, Marcel Tutor; Meyer, Anne S

    2015-05-27

    Agar, alginate, and carrageenans are high-value seaweed hydrocolloids, which are used as gelation and thickening agents in different food, pharmaceutical, and biotechnological applications. The annual global production of these hydrocolloids has recently reached 100,000 tons with a gross market value just above US$ 1.1 billion. The techno-functional properties of the seaweed polysaccharides depend strictly on their unique structural make-up, notably degree and position of sulfation and presence of anhydro-bridges. Classical extraction techniques include hot alkali treatments, but recent research has shown promising results with enzymes. Current methods mainly involve use of commercially available enzyme mixtures developed for terrestrial plant material processing. Application of seaweed polysaccharide targeted enzymes allows for selective extraction at mild conditions as well as tailor-made modifications of the hydrocolloids to obtain specific functionalities. This review provides an update of the detailed structural features of κ-, ι-, λ-carrageenans, agars, and alginate, and a thorough discussion of enzyme assisted extraction and processing techniques for these hydrocolloids.

  11. Seaweed Hydrocolloid Production: An Update on Enzyme Assisted Extraction and Modification Technologies

    Directory of Open Access Journals (Sweden)

    Nanna Rhein-Knudsen

    2015-05-01

    Full Text Available Agar, alginate, and carrageenans are high-value seaweed hydrocolloids, which are used as gelation and thickening agents in different food, pharmaceutical, and biotechnological applications. The annual global production of these hydrocolloids has recently reached 100,000 tons with a gross market value just above US$ 1.1 billion. The techno-functional properties of the seaweed polysaccharides depend strictly on their unique structural make-up, notably degree and position of sulfation and presence of anhydro-bridges. Classical extraction techniques include hot alkali treatments, but recent research has shown promising results with enzymes. Current methods mainly involve use of commercially available enzyme mixtures developed for terrestrial plant material processing. Application of seaweed polysaccharide targeted enzymes allows for selective extraction at mild conditions as well as tailor-made modifications of the hydrocolloids to obtain specific functionalities. This review provides an update of the detailed structural features of κ-, ι-, λ-carrageenans, agars, and alginate, and a thorough discussion of enzyme assisted extraction and processing techniques for these hydrocolloids.

  12. Modern and prospective technologies for weather modification activities: Developing a framework for integrating autonomous unmanned aircraft systems

    Science.gov (United States)

    DeFelice, T. P.; Axisa, Duncan

    2017-09-01

    This paper builds upon the processes and framework already established for identifying, integrating and testing an unmanned aircraft system (UAS) with sensing technology for use in rainfall enhancement cloud seeding programs to carry out operational activities or to monitor and evaluate seeding operations. We describe the development and assessment methodologies of an autonomous and adaptive UAS platform that utilizes in-situ real time data to sense, target and implement seeding. The development of a UAS platform that utilizes remote and in-situ real-time data to sense, target and implement seeding deployed with a companion UAS ensures optimal, safe, secure, cost-effective seeding operations, and the dataset to quantify the results of seeding. It also sets the path for an innovative, paradigm shifting approach for enhancing precipitation independent of seeding mode. UAS technology is improving and their application in weather modification must be explored to lay the foundation for future implementation. The broader significance lies in evolving improved technology and automating cloud seeding operations that lowers the cloud seeding operational footprint and optimizes their effectiveness and efficiency, while providing the temporal and spatial sensitivities to overcome the predictability or sparseness of environmental parameters needed to identify conditions suitable for seeding, and how such might be implemented. The dataset from the featured approach will contain data from concurrent Eulerian and Lagrangian perspectives over sub-cloud scales that will facilitate the development of cloud seeding decision support tools.

  13. Sustainable energy planning decision using the intuitionistic fuzzy analytic hierarchy process: choosing energy technology in Malaysia: necessary modifications

    Science.gov (United States)

    Al-Qudaimi, Abdullah; Kumar, Amit

    2018-05-01

    Recently, Abdullah and Najib (International Journal of Sustainable Energy 35(4): 360-377, 2016) proposed an intuitionistic fuzzy analytic hierarchy process to deal with uncertainty in decision-making and applied it to establish preference in the sustainable energy planning decision-making of Malaysia. This work may attract the researchers of other countries to choose energy technology for their countries. However, after a deep study of the published paper (International Journal of Sustainable Energy 35(4): 362-377, 2016), it is noticed that the expression used by Abdullah and Najib in Step 6 of their proposed method for evaluating the intuitionistic fuzzy entropy of each aggregate of each row of intuitionistic fuzzy matrix is not valid. Therefore, it is not genuine to use the method proposed by Abdullah and Najib for solving real-life problems. The aim of this paper was to suggest the required necessary modifications for resolving the flaws of the Abdullah and Najib method.

  14. EDITORIAL: XIII Mexican Workshop on Particles and Fields

    Science.gov (United States)

    Barranco, Juan; Contreras, Guillermo; Delepine, David; Napsuciale, Mauro

    2012-08-01

    Juan Barranco Physics Department, Guanajuato University, Loma del Bosque 103, col. Loma del Campestre, 37150, Leon (Mexico) jbarranc@fisica.ugto.mx Guillermo Contreras Departamento de Fisica Aplicada Centro de Investigacion y de Estudios Avanzados del Instituto Politecnico Nacional, Merida (Mexico) jgcn@mda.cinvestav.mx David Delepine Physics Department, Guanajuato University, Loma del Bosque 103, col. Loma del Campestre, 37150, Leon (Mexico) delepine@fisica.ugto.mx Mauro Napsuciale Physics Department, Guanajuato University, Loma del Bosque 103, col. Loma del Campestre, 37150, Leon (Mexico) mauro@fisica.ugto.mx The XIII Mexican Workshop on Particles and Fields (MWPF) took place from 20-26 October 2011, in the city of León, Guanajuato, México. This is a biennial meeting organized by the Division of Particles and Fields of the Mexican Physical Society designed to gather specialists in different areas of high energy physics to discuss the latest developments in the field. The thirteenth edition of this meeting was hosted by the Department of Cultural Studies of Guanajuato University in a nice environment dedicated to the Arts and Culture. The XIII MWPF was organized by three working groups who organized the corresponding sessions around three topics. The first one was Strings, Cosmology, Astroparticles and Physics Beyond the Standard Model. In this category we included: Cosmic Rays, Gamma Ray Bursts, Physics Beyond the Standard Model (theory and experimental searches), Strings and Cosmology. The working group for this topic was formed by Arnulfo Zepeda, Oscar Loaiza, Axel de la Macorra and Myriam Mondragón. The second topic was Hadronic Matter which included Perturbative QCD, Jets and Diffractive Physics, Hadronic Structure, Soft QCD, Hadron Spectroscopy, Heavy Ion Collisions and Soft Physics at Hadron Colliders, Lattice Results and Instrumentation. The working group for this topic was integrated by Wolfgang Bietenholz and Mariana Kirchbach. The third topic was

  15. Plasma-aided surface technology for modification of materials referred to fire protection

    International Nuclear Information System (INIS)

    Dineff, P.; Gospodinova, D.; Kostova, L.; Vladkova, T.; Chen, E.

    2008-01-01

    There has been considerable interest in dielectric barrier air discharge at atmospheric pressure and room temperature over the past decade due to the increased number of industrial applications. New plasma-aided capillary impregnation technology for flame spreading stop and fire protection of porous materials was developed. Research, based on thermogravimetric analysis (TGA), differential thermal analysis (DTA), and differential scanning calorimetry (DSC), proves that plasma-chemical surface pre-treatment exert material change on chemical interaction between phosphorus containing flame retardant and wood matrix (Pinus sylvestris, Bulgaria; Pseudotsuga, Canada)

  16. Chemical and physical modification of hemp fibres by steam explosion technology

    International Nuclear Information System (INIS)

    Sutka, Anna; Kukle, Silvija; Gravitis, Janis; Berzins, Agris

    2013-01-01

    In current research attempt has been made to analyse hemp fibres treated with steam explosion (SE) technology. Disintegration of hemp fibres separated from non-retted, dew-retted and dried stems of hemp ('Purini')[1] by alkali treatment and steam explosion (SE) were investigated. An average intensive SE in combination with the hydro-thermal and alkali after-treatment allows decreasing the diameter of hemp fibres and reduce the concentration of non-celluloses components, among them hemicelluloses, lignin, pectin, waxes and water [1;2

  17. Modification of certain functional properties of protein preparations depending on the introduced technological treatment

    International Nuclear Information System (INIS)

    Baca, E.; Skarzynska, M.; Gawel, J.; Jaworski, S.

    1996-01-01

    The paper shows the results of the work on the possibilities for the application of certain methods used for the improvement of quality of casein preparations. The presence of proteolytic and lipolytic enzymes of bacterial origin caused the undesirable changes of functional properties of high-protein products. Several technological treatments were applied, i.e. thermization of raw milk, thermization of casein grain, gamma-irradiation of casein and extrusion of casein. The microbiological quality of the product and the changes in viscosity of casein solutions during the storage, were evaluated. The high effectiveness of thermization and extruzion processes, was stated

  18. What history tells us XIII. Fifty years of the Central Dogma

    Indian Academy of Sciences (India)

    2008-05-14

    May 14, 2008 ... Home; Journals; Journal of Biosciences; Volume 33; Issue 2. What history tells us XIII. Fifty years of the Central Dogma. Michel Morange. Series Volume 33 Issue 2 June 2008 pp 171-175. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/jbsc/033/02/0171-0175 ...

  19. Factor XIII Val34Leu is a genetic factor involved in the etiology of venous thrombosis

    NARCIS (Netherlands)

    Franco, R. F.; Reitsma, P. H.; Lourenço, D.; Maffei, F. H.; Morelli, V.; Tavella, M. H.; Araújo, A. G.; Piccinato, C. E.; Zago, M. A.

    1999-01-01

    A mutation in the factor XIII gene (FXIII Val34Leu) gene was recently reported to confer protection against myocardial infarction, but its relationship with venous thrombosis is unknown. In addition, a mutation in the 5'-untranslated region of the FXII gene (46 C->T) was identified which is

  20. Manufacturing Technology of Composite Materials-Principles of Modification of Polymer Composite Materials Technology Based on Polytetrafluoroethylene.

    Science.gov (United States)

    Panda, Anton; Dyadyura, Kostiantyn; Valíček, Jan; Harničárová, Marta; Zajac, Jozef; Modrák, Vladimír; Pandová, Iveta; Vrábel, Peter; Nováková-Marcinčínová, Ema; Pavelek, Zdeněk

    2017-03-31

    The results of the investigations into the technological formation of new wear-resistant polymer composites based on polytetrafluoroethylene (PTFE) filled with disperse synthetic and natural compounds are presented. The efficiency of using PTFE composites reinforced with carbon fibers depends on many factors, which influence the significant improvement of physicomechanical characteristics. The results of this research allow stating that interfacial and surface phenomena of the polymer-solid interface and composition play a decisive role in PTFE composites properties. Fillers hinder the relative movement of the PTFE molecules past one another and, in this way, reduce creep or deformation of the parts, reducing the wear rate of parts used in dynamic applications as well as the coefficient of thermal expansion. The necessary structural parameters of such polymer composites are provided by regimes of process equipment.

  1. Manufacturing Technology of Composite Materials—Principles of Modification of Polymer Composite Materials Technology Based on Polytetrafluoroethylene

    Directory of Open Access Journals (Sweden)

    Anton Panda

    2017-03-01

    Full Text Available The results of the investigations into the technological formation of new wear-resistant polymer composites based on polytetrafluoroethylene (PTFE filled with disperse synthetic and natural compounds are presented. The efficiency of using PTFE composites reinforced with carbon fibers depends on many factors, which influence the significant improvement of physicomechanical characteristics. The results of this research allow stating that interfacial and surface phenomena of the polymer–solid interface and composition play a decisive role in PTFE composites properties. Fillers hinder the relative movement of the PTFE molecules past one another and, in this way, reduce creep or deformation of the parts, reducing the wear rate of parts used in dynamic applications as well as the coefficient of thermal expansion. The necessary structural parameters of such polymer composites are provided by regimes of process equipment.

  2. Practical background modification fermented beverage technology for the formation of defined functional properties

    Directory of Open Access Journals (Sweden)

    V. V. Botvinnikova

    2016-01-01

    Full Text Available The problem of provision of population with dairy products is escalating due to the fact that today, throughout the world, particularly in Russia, there is a shortage of milk as raw material, increasing every year. In the future, the consumption of milk and dairy products will continue to outpace growth in milk production is solid. To solve this problem, domestic producers need to find new ways to increase production of raw milk and improve the consumer and functional properties of fermented dairy products. The work was proposed the use of acoustic effects of ultrasound, triggered by the ultrasound, the technological model UTA ABOUT, 4/22 OM (frequency mechanical vibrations 22 ± 1,65 kHz. The main factors determining consumer characteristics, were taken physico-chemical parameters, structural and mechanical characteristics and the accumulation of minor biologically active substances – kefiran. In the study was obtained results confirming the necessity of using ultrasonic impact (RAS in the production technology of dairy products.

  3. Characterization of carbonic anhydrase XIII in the erythrocytes of the Burmese python, Python molurus bivittatus.

    Science.gov (United States)

    Esbaugh, A J; Secor, S M; Grosell, M

    2015-09-01

    Carbonic anhydrase (CA) is one of the most abundant proteins found in vertebrate erythrocytes with the majority of species expressing a low activity CA I and high activity CA II. However, several phylogenetic gaps remain in our understanding of the expansion of cytoplasmic CA in vertebrate erythrocytes. In particular, very little is known about isoforms from reptiles. The current study sought to characterize the erythrocyte isoforms from two squamate species, Python molurus and Nerodia rhombifer, which was combined with information from recent genome projects to address this important phylogenetic gap. Obtained sequences grouped closely with CA XIII in phylogenetic analyses. CA II mRNA transcripts were also found in erythrocytes, but found at less than half the levels of CA XIII. Structural analysis suggested similar biochemical activity as the respective mammalian isoforms, with CA XIII being a low activity isoform. Biochemical characterization verified that the majority of CA activity in the erythrocytes was due to a high activity CA II-like isoform; however, titration with copper supported the presence of two CA pools. The CA II-like pool accounted for 90 % of the total activity. To assess potential disparate roles of these isoforms a feeding stress was used to up-regulate CO2 excretion pathways. Significant up-regulation of CA II and the anion exchanger was observed; CA XIII was strongly down-regulated. While these results do not provide insight into the role of CA XIII in the erythrocytes, they do suggest that the presence of two isoforms is not simply a case of physiological redundancy. Copyright © 2015. Published by Elsevier Inc.

  4. Condyle-fossa modifications and muscle interactions during herbst treatment, part 1. New technological methods.

    Science.gov (United States)

    Voudouris, John C; Woodside, Donald G; Altuna, Gurkan; Kuftinec, Mladen M; Angelopoulos, Gerassimos; Bourque, Paul J

    2003-06-01

    Changes in the condyle, the glenoid fossa, and the muscles of mastication were investigated in subjects undergoing continuous orthopedic advancement of the mandible with a Herbst-block appliance. The total sample consisted of 56 subjects and included 15 nonhuman primates (in the middle mixed, early permanent, and permanent dentitions), 17 human Herbst patients in the early permanent dentition, and 24 human controls from the Burlington Growth Center. The 8 nonhuman primates in the middle mixed dentition were the focus of this study. Mandibular advancement was obtained progressively in 5 animals by adding stops to the telescopic arms of fixed functional Herbst appliances with occlusal coverage; activations of 5.0 mm, 7.0 mm, and 8.0 mm were achieved. Two primates served as controls, and the third was a sham control. Two experimental animals and the 2 controls also wore surgically implanted electromyographic electrodes in the superior and inferior heads of the lateral pterygoid muscles and in the superficial masseter and anterior digastric muscles. Changes in condylar growth direction and amount were assessed with the Björk method from measurements made on serial cephalometric tracings superimposed on metallic implants. Undecalcified sections, treated with intravenous tetracycline vital staining, were viewed with fluorescence microscopy to examine histologic changes in the condyle and the glenoid fossa. New bone formation in the fossa associated with continuous mandibular protrusion was quantified by using computerized histomorphometric analysis of decalcified histological sections and polarized light. The unique combination of permanently implanted electromyographic electrodes, tetracycline vital staining, and histomorphometry represents a significant technological advancement in methods and materials. Together, they demonstrated different muscle-bone interaction results for functional appliances than those reported in previous studies. In Part 1 of this study, we

  5. Methods of preparation and modification of advanced zero-valent iron nanoparticles, their properties and application in water treatment technologies

    Science.gov (United States)

    Filip, Jan; Kašlík, Josef; Medřík, Ivo; Petala, Eleni; Zbořil, Radek; Slunský, Jan; Černík, Miroslav; Stavělová, Monika

    2014-05-01

    Zero-valent iron nanoparticles are commonly used in modern water treatment technologies. Compared to conventionally-used macroscopic iron or iron microparticles, the using of nanoparticles has the advantages given mainly by their generally large specific surface area (it drives their high reactivity and/or sorption capacity), small dimensions (it allows their migration e.g. in ground water), and particular physical and chemical properties. Following the applications of zero-valent iron particles in various pilot tests, there arose several critical suggestions for improvements of used nanomaterials and for development of new generation of reactive nanomaterials. In the presentation, the methods of zero-valent iron nanoparticles synthesis will be summarized with a special attention paid to the thermally-induced solid-state reaction allowing preparation of zero-valent iron nanoparticles in an industrial scale. Moreover, the method of thermal reduction of iron-oxide precursors enables to finely tune the critical parameters (mainly particle size and morphology, specific surface area, surface chemistry of nanoparticles etc.) of resulting zero-valet iron nanoparticles. The most important trends of advanced nanoparticles development will be discussed: (i) surface modification of nanomaterilas, (ii) development of nanocomposites and (iii) development of materials for combined reductive-sorption technologies. Laboratory testing of zero-valent iron nanoparticles reactivity and migration will be presented and compared with the field observations: the advanced zero-valent iron nanoparticles were used for groundwater treatment at the locality contaminated by chlorinated hydrocarbons (VC, DCE, TCE and PCE) and reacted nanoparticles were extracted from the sediments for their fate assessment. The authors gratefully acknowledge the support by the Technology Agency of the Czech Republic "Competence Centres" (project No. TE01020218) and the EU FP7 (project NANOREM).

  6. Surface modification of chitin using ultrasound-assisted and supercritical CO{sub 2} technologies for cobalt adsorption

    Energy Technology Data Exchange (ETDEWEB)

    Dotto, Guilherme L., E-mail: guilherme_dotto@yahoo.com.br; Cunha, Jeanine M., E-mail: jeaninecunha@gmail.com; Calgaro, Camila O., E-mail: camila.itepjr@gmail.com; Tanabe, Eduardo H., E-mail: edutanabe@yahoo.com.br; Bertuol, Daniel A., E-mail: dbertuol@gmail.com

    2015-09-15

    Highlights: • Chitin was modified by ultrasound-assisted (UA) and supercritical (SCO{sub 2}) technologies. • Chitin, UA-chitin and SCO{sub 2}-chitin were used as adsorbents for Co(II). • UA and SCO{sub 2} treatments provided increase of 20 and 3 times in chitin surface area. • The Co(II) adsorption capacity increased until 67.8%, using UA-chitin. - Abstract: Ultrasound-assisted (UA) and supercritical CO{sub 2} technologies (SCO{sub 2}) were used to modify the chitin surface and, improve its adsorption characteristics regarding to cobalt. Chitin, before and after the treatments, was characterized by N{sub 2} adsorption isotherms (BET), infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and scanning electron microscopy (SEM). Unmodified and surface modified chitins were used as adsorbents to remove cobalt from aqueous solutions. The adsorption study was performed by equilibrium isotherms and kinetic curves. The chitin particle characteristics, such as, surface area, pore volume and porosity were improved by the UA and SCO{sub 2} treatments. The crystallinity index decreased after the UA and SCO{sub 2} treatments, and also, intense surface modifications were observed. Langmuir and Freundlich models were adequate to represent the adsorption equilibrium. The maximum adsorption capacities were 50.03, 83.94 and 63.08 mg g{sup −1} for unmodified chitin, UA surface modified chitin and SCO{sub 2} surface modified chitin. The adsorption kinetic curves were well represented by the pseudo-second order model. UA and SCO{sub 2} technologies are alternatives to modify the chitin surface and improve its adsorption characteristics.

  7. Surface Modification Technology of ODS Alloying Treatment by using Laser Heat Source

    International Nuclear Information System (INIS)

    Kim, H. G.; Kim, I. H.; Choi, B. K.; Park, J. Y.; Koo, Y. H.

    2012-01-01

    The ODS (Oxide Dispersion Strengthed) alloys can be applied as structural materials for components in the core of a nuclear power plants since these components must have a high mechanical strength at high temperature up to 700 .deg. C. This type of alloy was generally manufactured by mechanical alloying from its source metal and Y 2 O 3 powders. The mechanical alloyed powder is subjected to the HIP (Hot Isotatic Pressing) or hot extrusion: and this product is heat treated at target temperature and time. Thus, the Y 2 O 3 particles are dispersed in the metal matrix. These manufacturing process of ODS alloy is very complex and expensive. Also, it is necessary the special techniques to obtain the uniform dispersion and volume control of Y 2 O 3 particles. Another problem is the final product forming such as tube and sheet because the intermediated-product has a high mechanical strength due to the dispersion of Y 2 O 3 particles. The laser cladding techniques was applied on the surface cladding of ceramics and inter-metallic compounds on metal base and ceramic base components to increase corrosion and wear resistance. The laser heat source can be used to the alloying the metal and ceramic materials, because thermally melting of metal and ceramic is possible. So, we are applied on ODS alloy manufacturing by using the laser heat source. The main advantages and disadvantage of this technology can be resumed as follows: · It is possible to apply to the sheet and tube shape component, directly. · Metallurgical damage such as HAZ and severe grain growth is considerably reduced. · Good control of the alloying element of the treated zone · Highly reproducible homogeneous zone · The pores and cracks are suppressed in the treated zone · Oxidation can be prevented during the process. · Good control is possible for the irregular shaped components. · The bulk material alloying is limited by the power of laser source. So, this work is studied on the ODS alloy manufacturing

  8. A hurricane modification process, applying a new technology tested for warm cloud seeding to produce artificial rains

    Science.gov (United States)

    Imai, T.; Martin, I.; Iha, K.

    A Hurricane Modification Process with application of a new clean technology attested for seeding warm clouds with collector pure water droplets of controlled size to produce artificial rains in warm clouds is proposed to modify the hurricanes in order to avoid their formation or to modify the trajectory or to weaken hurricanes in action The Process is based on the time-dependent effects of cloud droplets microphysical processes for the formation and growth of the natural water droplets inside the clouds releasing large volumes of Aeolian energy to form the strong rotative upside air movements A new Paradigm proposed explain the strong and rotative winds created with the water droplets formation and grow process releasing the rotative Aeolian Energy in Tornados and Hurricanes This theory receive the Gold Medal Award of the Water Science in the 7th International Water Symposium 2005 in France Artificial seeding in the Process studies condensing a specified percentage of the water vapor to liquid water droplets where we observe the release of larges intensity of the Aeolian energy creates the hurricanes producing appreciable perturbations With they rotating strong wind created by the water droplets releasing Aeolian energy The Amplitudes of these winds are comparable to natural disasters Once this natural thermal process is completely understood artificial process to modify the hurricanes become scientifically possible to avoid them to happen or to deviate their trajectory or to weaken the already formed hurricanes In this work

  9. The Spanish King Alfonso XIII on pages of Russian Press in 1902–1917

    Directory of Open Access Journals (Sweden)

    Ariadna A. Petrova

    2016-06-01

    Full Text Available The article examines the approaches of the Russian press (“Moskovskie Vedomosti”, “Russkie Vedomosti”, “Novoe Vremia” to the evaluation of the Spanish King Alfonso XIII (1886–1941 at the first stage of his government. During this time he, acting within the powers granted to him by the Spanish constitution of the Restoration era, tried to stabilize the political situation in Spain and raise the prestige of the royal power, is also actively involved in social and political life of the country. Alfonso XIII also sought to raise the country's prestige in the international arena, seriously shaken after the “disaster in 1898”. The special attention is paid to the problem of formation of public opinion by the Russian press, on the example of newspaper coverage of humanitarian and intermediate activity of the Spanish king during the First World War. The activity of Alfonso XIII, aimed at protecting the interests of the citizens of the Russian Empire and the Slavic population of Austria-Hungary, in particular, his personal involvement in the rescue of the Austrian authorities was sentenced to death by a correspondent of the newspaper "New time" in Vienna D.G. Yanchevetskiy, forced the Russian public during the war to change the attitude towards Spain, its king and Spanish neutrality.

  10. Biomaterials modification by ion beam

    International Nuclear Information System (INIS)

    Zhang Tonghe; Yi Zhongzhen; Zhang Xu; Wu Yuguang

    2001-01-01

    Ion beam technology is one of best ways for the modification of biomaterials. The results of ion beam modification of biomaterials are given. The method and results of improved biocompatibility are indicated by ion beam technology. The future development of ion beam modification of biomaterials is discussed

  11. Stroke rehabilitation: assistive technology devices and environmental modifications following primary rehabilitation in hospital--a therapeutic perspective

    DEFF Research Database (Denmark)

    Sørensen, Hanne Vinkel; Lendal, Susie; Schultz-Larsen, Kirsten

    2003-01-01

    The aim of this article is to describe the need for assistive devices and environmental modifications among long-living stroke survivors and to investigate if the need is continued and growing over time. The study sample of 155 consecutive stroke patients with stroke-related impairment, discharged...... home from three hospitals in Copenhagen from 1996 through 1998, constituted 20% of the total population of stroke survivors in this area. The results showed that 75% of these patients were provided with assistive devices and/or environmental modifications at discharge. Six months after discharge...... be required in order to target stroke survivors' changing needs for assistive devices and environmental modifications....

  12. A low-cost, high-efficiency and high-flexibility surface modification technology for a black bisphenol A polycarbonate board

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Suhuan; Liu, Jianguo, E-mail: Liujg@mail.hust.edu.cn; Lv, Ming; Zeng, Xiaoyan

    2014-09-30

    Highlights: • A low-cost, high-efficiency, high-flexibility surface modification technology was achieved. • Different laser modification parameters resulted in different surface microstructures. • These special microstructures played a deciding role in the surface properties. • After the modification, the surface energy was found to have a significant increase. • The technology would be advantageous to fabricate high-quality micro devices and systems. - Abstract: In this paper, a low-cost, high-efficiency and high-flexibility surface modification technology for polymer materials was achieved at high laser scanning speeds (600–1000 mm s{sup −1}) and using an all-solid state, Q-switched, high-average power, and nanosecond pulse ultraviolet (355 nm wavelength) laser. During the surface modification of a very important engineering plastic, i.e., black bisphenol A polycarbonate (BAPC) board, it was found that different laser parameters (e.g., laser fluence and pulse frequency) were able to result in different surface microstructures (e.g., many tiny protuberances or a porous microstructure with periodical V-type grooves). After the modification, although the total relative content of the oxygen-containing groups (e.g., C-O and COO{sup −}) on the BAPC surface increased, however, the special microstructures played a deciding role in the surface properties (e.g., contact angle and surface energy) of the BAPC. The change trend of the water contact angle on the BAPC surface was with an obvious increase, that of the diiodomethane contact angle was with a most decrease, and that of the ethylene glycol contact angle was between the above two. It showed that the wetting properties of the three liquids on the modified BAPC surface were different. Basing on the measurements of the contact angles of the three liquids, and according to the Young equation and the Lifshitz van der Waals and Lewis acid–base theory, the BAPC surface energy after the modification was

  13. A low-cost, high-efficiency and high-flexibility surface modification technology for a black bisphenol A polycarbonate board

    International Nuclear Information System (INIS)

    Wang, Suhuan; Liu, Jianguo; Lv, Ming; Zeng, Xiaoyan

    2014-01-01

    Highlights: • A low-cost, high-efficiency, high-flexibility surface modification technology was achieved. • Different laser modification parameters resulted in different surface microstructures. • These special microstructures played a deciding role in the surface properties. • After the modification, the surface energy was found to have a significant increase. • The technology would be advantageous to fabricate high-quality micro devices and systems. - Abstract: In this paper, a low-cost, high-efficiency and high-flexibility surface modification technology for polymer materials was achieved at high laser scanning speeds (600–1000 mm s −1 ) and using an all-solid state, Q-switched, high-average power, and nanosecond pulse ultraviolet (355 nm wavelength) laser. During the surface modification of a very important engineering plastic, i.e., black bisphenol A polycarbonate (BAPC) board, it was found that different laser parameters (e.g., laser fluence and pulse frequency) were able to result in different surface microstructures (e.g., many tiny protuberances or a porous microstructure with periodical V-type grooves). After the modification, although the total relative content of the oxygen-containing groups (e.g., C-O and COO − ) on the BAPC surface increased, however, the special microstructures played a deciding role in the surface properties (e.g., contact angle and surface energy) of the BAPC. The change trend of the water contact angle on the BAPC surface was with an obvious increase, that of the diiodomethane contact angle was with a most decrease, and that of the ethylene glycol contact angle was between the above two. It showed that the wetting properties of the three liquids on the modified BAPC surface were different. Basing on the measurements of the contact angles of the three liquids, and according to the Young equation and the Lifshitz van der Waals and Lewis acid–base theory, the BAPC surface energy after the modification was calculated

  14. Las armas de los Limia y sus derivaciones (siglos XIII-XV

    Directory of Open Access Journals (Sweden)

    Eduardo PARDO DE GUEVARA Y VALDÉS

    2011-07-01

    Full Text Available En los primeros tiempos del fenómeno emblemático-heráldico, la adopción de unas armerías no respondía a un proceso reflexivo, tal y como ahora parecería natural, sino a unos impulsos espontáneos, en los que predominaba el simple gusto o capricho, cuando no la directa imitación o aceptación de modelos ya existentes, con independencia de la significación o valor social que se les reconociera. Un buen testimonio de ello lo ofrecen las armas traídas ya antes de mediar el siglo XIII por el linaje renombrado Limia, cuyo análisis ofrece lecturas interesantes para comprender el sentido y alcance de estos procedimientos habituales. Como se trata aquí, los palos y palados de los Limia fueron traídos después por los Valcárcel y, más tarde, por un pequeño número de linajes de ellos derivados, aunque las modificaciones introducidas parecen ocultar este origen: las varillas de los Varela, las correas de los Isorna, las lanzas parlantes de los Lanzós -o Lanzones- o las estacas de los Quiroga, así como la losa de los Losada y las fórmulas fusionadas de palos y calderas, cuyo inicio pudo estar en los Biedma y que no tardaría en identificar también al grupo de los Taboada y Noguerol.Aux premiers temps du phénomène emblématique-héraldique, l’adoption d'armoiries répondait moins à un processus réfléchi comme on s’y attendrait aujourd’hui, qu’à des élans spontanés guidés par le simple plaisir ou le caprice, ou même par l’imitation ou l’adoption de quelques modèles déjà existants, indépendamment de la signification ou de la valeur sociale qu’on pourrait leur reconnaître. Tel est le cas des armes portées dans la première moitié du XIIIe siècle par le lignage des Limia, dont l’analyse permet de  comprendre le sens et la portée de ces procédés. Comme il sera dit dans cette étude, les pals et palés des Limia ont été ensuite portés par les Valcárcel et, plus tard, par un petit nombre de lignages

  15. Spontaneous rupture of the spleen in Factor XIII deficiency: A report of two cases

    International Nuclear Information System (INIS)

    Bhan, Pankaj; Al-Hilli, Shatha

    2010-01-01

    Spontaneous rupture of spleen due to factor XIII defieciency is a rare cause of abdominal pain with disastrous consequences and can be easily confused with other abdominal pathologies until a strong possibility is entertained.The patients usually present in emergengy with acute abdomen and diagnosis is difficult.The diagnosis is usually made on high degree of clinical suspicion and falling hematorit and failure of conservative management or by imaging. The radiologist need to be aware of this potentially fatal complication since early intervention is life saving. CT imaging can also help in conservative management in non critical patients

  16. L'escriptura i el llibre a la Catalunya Central als segles XIII i XIV

    OpenAIRE

    Torras i Cortina, Miquel

    2004-01-01

    Consultable des del TDX Títol obtingut de la portada digitalitzada Aquesta investigació reconstrueix la vida cultural de la ciutat de Manresa, a la Catalunya Central, al llarg dels segles XIII i XIV, amb el còdex baixmedieval com a fil conductor. L'estudi es basa en l'anàlisi de 305 documents amb mencions libràries (editats conjuntament), pràcticament tots ells inèdits, que procedeixen d'un buidatge exhaustiu dels fons notarials que custodien l'Arxiu Històric Comarcal de Manresa i l'Arx...

  17. 4p-5s transitions in In XIII, In XIV and In XV

    International Nuclear Information System (INIS)

    Carroll, P.K.; Costello, J.T.; O'Sullivan, G.

    1986-01-01

    The spectrum of an indium plasma produced by a 1.5 J, 25 ns ruby laser was recorded in the XUV. At wavelengths below 100 A, the spectrum is dominated by 4p-5s transitions in a number of ion stages. Many lines arising from 4p 6 4d-4p 5 4d5s, 4p 6 -4p 5 5s and 4p 5 -4p 4 5s transitions in In XIII, In XIV and In XV have been identified by isoelectronic extrapolation and Dirac-Fock calculations. (orig.)

  18. Kinerja Uptd dalam Pengelolaan Objek Wisata Candi Muara Takus Kecamatan XIII Koto Kampar Kabupaten Kampar

    OpenAIRE

    Rusli. SD, Zaili; Dewi, Marta

    2016-01-01

    Based on interviews and observations at the resort, there is found a phenomenon that occurs : (a) The main duties of UPTD in resort areaa of Muara Takus Tempel at XIII Koto Kampar has not been done entirely properly, (b) Many programs that have been created by UPTD inresort areas of Muara Takus Tempel was not implemented, (c) The employees in the UPTD is stiil lacking so it is affecting the main duties to be carried out properly. The aim of this study was to determine how the performance of U...

  19. Surface modification of bisphenol A polycarbonate material by ultraviolet Nd:YVO4 laser high-speed microprocessing technology

    International Nuclear Information System (INIS)

    Liu, Jianguo; Wang, Suhuan; Lv, Ming; Zeng, Xiaoyan

    2014-01-01

    In this paper, a low-cost and high-efficiency microprocessing modification technology for the surface of bisphenol A polycarbonate (BAPC) material was achieved (in particular, from hydrophilicity to hydrophobicity) at high laser scanning speeds (600–1000 mm s  − 1 ) and using an all-solid state, Q-switched, high-average power and nanosecond pulse Nd:YVO 4 laser (355 nm wavelength). During the modification, it was found that the laser fluence and pulse width were the two main parameters affecting the modification effect. Moreover, the modification had a significant effect on the water contact angle, wetting behavior, microstructure, average roughness and chemical composition of the surface. When the laser fluences applied were low (i.e., less than the so-called critical fluence of the UV laser modification of the BAPC material), the water contact angle was found to be a little less than the original, the hydrophilicity was slightly improved, the relative content of the oxygen-containing groups (e.g. O–C and COO  −  ) increased, the microstructure and average roughness only had a very slight change, and the wetting behavior complied with the Wenzel regime. On the other hand, when the laser fluences applied were high, the water contact angle significantly increased, the hydrophilicity markedly decreased and the relative content of the oxygen-containing groups also increased. Here, a porous microstructure with periodical v-type grooves was generated and the average roughness had an obvious increase. In this case, the wetting behavior could be explained by the Cassie-Baxter regime, i.e., the microstructure and average roughness change played a deciding role. The reason for this might be that different laser parameters result in different material deformation and removal processes, thereby resulting in different surface chemical compositions, microstructures, roughnesses and wetting properties. (paper)

  20. Modifications to the HIPAA Privacy, Security, Enforcement, and Breach Notification rules under the Health Information Technology for Economic and Clinical Health Act and the Genetic Information Nondiscrimination Act; other modifications to the HIPAA rules.

    Science.gov (United States)

    2013-01-25

    The Department of Health and Human Services (HHS or ``the Department'') is issuing this final rule to: Modify the Health Insurance Portability and Accountability Act (HIPAA) Privacy, Security, and Enforcement Rules to implement statutory amendments under the Health Information Technology for Economic and Clinical Health Act (``the HITECH Act'' or ``the Act'') to strengthen the privacy and security protection for individuals' health information; modify the rule for Breach Notification for Unsecured Protected Health Information (Breach Notification Rule) under the HITECH Act to address public comment received on the interim final rule; modify the HIPAA Privacy Rule to strengthen the privacy protections for genetic information by implementing section 105 of Title I of the Genetic Information Nondiscrimination Act of 2008 (GINA); and make certain other modifications to the HIPAA Privacy, Security, Breach Notification, and Enforcement Rules (the HIPAA Rules) to improve their workability and effectiveness and to increase flexibility for and decrease burden on the regulated entities.

  1. Research trends in biomimetic medical materials for tissue engineering: 3D bioprinting, surface modification, nano/micro-technology and clinical aspects in tissue engineering of cartilage and bone.

    Science.gov (United States)

    Chen, Cen; Bang, Sumi; Cho, Younghak; Lee, Sahnghoon; Lee, Inseop; Zhang, ShengMin; Noh, Insup

    2016-01-01

    This review discusses about biomimetic medical materials for tissue engineering of bone and cartilage, after previous scientific commentary of the invitation-based, Korea-China joint symposium on biomimetic medical materials, which was held in Seoul, Korea, from October 22 to 26, 2015. The contents of this review were evolved from the presentations of that symposium. Four topics of biomimetic medical materials were discussed from different research groups here: 1) 3D bioprinting medical materials, 2) nano/micro-technology, 3) surface modification of biomaterials for their interactions with cells and 4) clinical aspects of biomaterials for cartilage focusing on cells, scaffolds and cytokines.

  2. Red portuaria y control marítimo en el reino de Valencia (siglos XIII-XV)

    OpenAIRE

    Igual Luis, David

    2013-01-01

    El trabajo aborda la progresiva creación de una red portuaria en el litoral valenciano de los siglos XIII-XV y, a partir de ella, el desarrollo de diversos instrumentos de control marítimo que atendían a principios políticos, legales, infraestructurales y hasta territoriales.

  3. León XIII y la memoria de un catolicismo que «nació libre»

    Directory of Open Access Journals (Sweden)

    Robles Muñoz, Cristóbal

    2004-06-01

    Full Text Available Problems and responses during the pontificate of León XIII experienced changes of orientation after arrival of Pío XII. One of the problems was how to extend the presence of the Church among society, and expand relations of the latest with the Church. Responses were freedom and justice. Freedom to reflect on faith, thinking over its origins and dialoguing with culture, and to use recognised civil rights. Justice as a moral compromise towards the inhuman life conditions suffered by the population. León XIII was frightened at any innovation, but accepted the debate.

    Los problemas y respuestas presentes en la etapa de León XIII experimentaron un cambio de rumbo con la llegada de Pío X. Los problemas enraízan la presencia de la Iglesia en la sociedad y de ésta en la Iglesia. Las respuestas, la libertad y la justicia. La libertad, para pensar la fe, investigando sus orígenes y dialogando con la cultura, para usar derechos civilmente reconocidos. La justicia, como exigencia moral frente a las condiciones inhumanas en las que vive el pueblo. León XIII temió las novedades, pero aceptó el debate.

  4. Proceedings of the XIII International Symposium on Biological Control of Weeds; September 11-16, 2011; Waikoloa, Hawaii, USA

    Science.gov (United States)

    Yun Wu; Tracy Johnson; Sharlene Sing; S. Raghu; Greg Wheeler; Paul Pratt; Keith Warner; Ted Center; John Goolsby; Richard Reardon

    2013-01-01

    A total of 208 participants from 78 organizations in 19 countries gathered at the Waikoloa Beach Marriott on the Big Island of Hawaii on September 11-16, 2011 for the XIII International Symposium on Biological Control of Weeds. Following a reception on the first evening, Symposium co-chairs Tracy Johnson and Pat Conant formally welcomed the attendees on the morning of...

  5. INFORMATION SYSTEM QUALITY INFLUENCE ON ORGANIZATION PERFORMANCE: A MODIFICATION OF TECHNOLOGY-BASED INFORMATION SYSTEM ACCEPTANCE AND SUCCESS MODEL

    Directory of Open Access Journals (Sweden)

    Trisnawati N.

    2017-12-01

    Full Text Available This study aims to examine the effect of information system quality on technology-based accounting information systems usage and their impact on organizational performance on local government. This study is based on Technology Acceptance Model (TAM, IS Success Model, and the success of technology-based information systems. This study is a combination of previous studies conducted by Seddon and Kiew (1997, Saeed and Helm (2008, and DeLone and McLean (1992. This study used survey method and took 101 respondents from accounting staff working in Malang and Mojokerto regencies. This study uses Partial Least Square to examine research data. Research result exhibits information system qualities affecting benefit perception and user satisfaction. Technology-based accounting information systems usage in local government is influenced by benefits perception and user satisfaction. Research result concluded that technology-based accounting information systems usage will affect the performance of local government organizations.

  6. Acquired Factor Xiii Deficiency: An Uncommon But Easily Missed Cause Of Severe Bleeding

    LENUS (Irish Health Repository)

    Fogarty, H

    2018-05-01

    Factor XIII (FXIII) is a plasma clotting protein involved in clot stabilization. Severe FXIII deficiency may present with severe, even fatal bleeding. Critically however, routine coagulation assays may be normal and only specific FXIII assays will detect the abnormality. Herein we discuss a case report of a patient with acquired FXIII deficiency in order to highlight the clinical challenges associated with establishing the diagnosis and discuss the treatment approach. A 70-year-old man presented with a gluteal haematoma despite no preceding personal history of bleeding. Extensive initial haemostatic investigations were normal until a specific FXIII assay showed a marked reduction in FXIII levels. With directed treatment, bleeding episodes ceased and remission was achieved. Clinical awareness of FXIII deficiency is important, so appropriate testing can be implemented in patients with unexplained bleeding diatheses, particularly those in whom bleeding responds poorly to standard replacement therapy.

  7. Gyvulininkystė pietryčių Lietuvoje XIII-XIV a

    OpenAIRE

    Vitkūnas, Manvydas

    2006-01-01

    Gyvulininkystė XIII-XIV a. buvo viena svarbiausių ūkio šakų. Pietryčių Lietuvos archeologiniuose paminkluose surinktos osteologinės medžiagos tyrimų duomenimis, naminiai gyvuliai daugeliui gyventojų buvo pagrindiniu mėsos šaliniu. Pietryčių Lietuvos archeologiniuose paminkluose (Nemenčinės, Bradeliškių, Maišiagalos, Aukštadvario piliakalniuose, viduramžių Kernavės miesto vietoje, Vilniaus žemutinėje pilyje) naminių gyvulių kaulai sudarė dažniausiai 80-95%, o Maišiagalos piliakalnyje – net 99%...

  8. PIXE and IL analysis of an archeologically problematic XIII century ceramic production

    Energy Technology Data Exchange (ETDEWEB)

    Zucchiatti, Alessandro, E-mail: alessandro.zucchiatti@uam.es [Centro de Micro-Análisis de Materiales, Universidad Autónoma de Madrid, C/Faraday 3, Madrid (Spain); Jiménez-Rey, David [Centro de Micro-Análisis de Materiales, Universidad Autónoma de Madrid, C/Faraday 3, Madrid (Spain); Laboratorio Nacional de Fusión CIEMAT, E06.P2.09, Madrid (Spain); Climent-Font, Aurelio [Centro de Micro-Análisis de Materiales, Universidad Autónoma de Madrid, C/Faraday 3, Madrid (Spain); Departamento di Física Aplicada, Universidad Autónoma de Madrid, Madrid (Spain); Martina, Silvia [Centro de Micro-Análisis de Materiales, Universidad Autónoma de Madrid, C/Faraday 3, Madrid (Spain); Universitá degli Studi di Torino, Turin (Italy); Faieta, Rosangela [Centro de Micro-Análisis de Materiales, Universidad Autónoma de Madrid, C/Faraday 3, Madrid (Spain); Universitá della Tuscia, Viterbo (Italy); Maggi, Marco [Musei Vaticani, Ufficio del Conservatore, Rome (Italy); Giuntini, Lorenzo; Calusi, Silvia [INFN – Laboratorio di tecniche Nucleari per i Beni Culturali, Florence (Italy)

    2015-11-15

    At the beginning of the XIII century the archaeologists have found evidence of a singular, transitional, pottery technique limited to a small area around western Liguria (Northwest of Italy). Known as Ligurian Protomajolica (PML), it shows in the same ceramic body and on the same surface white slip and enamel together, addressing questions about the technical reasons of this unusual combination, its origin and evolution. To integrate previous morphological and mineralogical studies, we have analysed by particle induced X-ray emission (also with mapping) and ionoluminescence (IL) the ceramic body, slip and glaze composition of 56 samples, of which 25 PML’s. We have identified some PML’s compositional features which are distinct from those of other coeval or later productions from the same area. A few PML imitations are described. A plausible explanation of the origin of the PML’s, based both on the archaeometric results and the archaeological and historical knowledge, is presented.

  9. Application of disintigratory technology for the modification of materials used in the construction of wells. Part I.

    Directory of Open Access Journals (Sweden)

    AGZAMOV Farit Akramovich,

    2017-04-01

    Full Text Available Disintegrator technology was widely used in the construction industry and in the oil and gas industry. In the process of drilling wells, powdery materials are used, the quality of which often determines the results of the well construction as an engineering structure. The application of disintegrator technology in the processing of clay powders which are one of the main components used to produce washing liquids has shown the high efficiency of this technology. One of the main multi-tonnage materials used in the construction of deep wells for oil and gas is Portland cement. However, the specific conditions of the well and work performance technology establish additional requirements for both grouting cement and also mortar and stone which are obtained from this binder. That refers to high water-cement ratios, rigid frames for density, water loss, sedimentation stability of solutions, high strength and low permeability of the stone. High corrosive activity of reservoir fluids and high temperatures, which often exceeds 100–150о C, set increased requirements to corrosion and thermal resistance of hardening products. The use of modifying additives and mechanoactivation of cements and grouting mixtures allows us to effectively solve these problems. The results of the study how mechanochemical activation of siliceous additives effects on the structure of their surfaces are presented and the increase in the rate of interaction of silica with calcium hydroxide, which is necessary for increasing the life of a plugging stone, is experimentally proven. Improved structure of the produced cement stone after the disintegration treatment of cement is shown.

  10. Application of disintigratory technology for the modification of materials used in the construction of wells. Part II.

    Directory of Open Access Journals (Sweden)

    AGZAMOV Farit Akramovich,

    2017-06-01

    Full Text Available Disintegrator technology was widely used in the construction industry and in the oil and gas industry. In the process of drilling wells, powdery materials are used, the quality of which often determines the results of the well construction as an engineering structure. The application of disintegrator technology in the processing of clay powders which are one of the main components used to produce washing liquids has shown the high efficiency of this technology. One of the main multi-tonnage materials used in the construction of deep wells for oil and gas is Portland cement. However, the specific conditions of the well and work performance technology establish additional requirements for both grouting cement and also mortar and stone which are obtained from this binder. That refers to high water-cement ratios, rigid frames for density, water loss, sedimentation stability of solutions, high strength and low permeability of the stone. High corrosive activity of reservoir fluids and high temperatures, which often exceeds 100–150оC, set increased requirements to corrosion and thermal resistance of hardening products. The use of modifying additives and mechanoactivation of cements and grouting mixtures allows us to effectively solve these problems. The results of the study how mechanochemical activation of siliceous additives effects on the structure of their surfaces are presented and the increase in the rate of interaction of silica with calcium hydroxide, which is necessary forincreasing the life of a plugging stone, is experimentally proven. Improved structure of the produced cement stone after the disintegration treatment of cement is shown.

  11. Platelet factor XIII increases the fibrinolytic resistance of platelet-rich clots by accelerating the crosslinking of alpha 2-antiplasmin to fibrin

    Science.gov (United States)

    Reed, G. L.; Matsueda, G. R.; Haber, E.

    1992-01-01

    Platelet clots resist fibrinolysis by plasminogen activators. We hypothesized that platelet factor XIII may enhance the fibrinolytic resistance of platelet-rich clots by catalyzing the crosslinking of alpha 2-antiplasmin (alpha 2AP) to fibrin. Analysis of plasma clot structure by polyacrylamide gel electrophoresis and immunoblotting revealed accelerated alpha 2AP-fibrin crosslinking in platelet-rich compared with platelet-depleted plasma clots. A similar study of clots formed with purified fibrinogen (depleted of factor XIII activity), isolated platelets, and specific factor XIII inhibitors indicated that this accelerated crosslinking was due to the catalytic activity of platelet factor XIII. Moreover, when washed platelets were aggregated by thrombin, there was evidence of platelet factor XIII-mediated crosslinking between platelet alpha 2AP and platelet fibrin(ogen). Specific inhibition (by a monoclonal antibody) of the alpha 2AP associated with washed platelet aggregates accelerated the fibrinolysis of the platelet aggregate. Thus in platelet-rich plasma clots, and in thrombin-induced platelet aggregates, platelet factor XIII actively formed alpha 2AP-fibrin crosslinks, which appeared to enhance the resistance of platelet-rich clots to fibrinolysis.

  12. Accommodating for plant modifications

    International Nuclear Information System (INIS)

    Weirich, P.H.

    1977-01-01

    Modification to a nuclear power plant may have different causes: 1) new instructions by the authorities; 2) changes of the marginal conditions on the construction site; 3) progress in the technological development. - Examples from different plants are supposed to demonstrate how such changes influence the planning or the construction and how they are integrated in the process of preparation. A distinction can be made between modifications before the completion of the submission of the order, during the phase of preparatory planning and during the construction phase. Of great importance are especially modifications made after the beginning of the construction works, since, in general, there is little scope for technical modifications and since consequences for the time schedule are to be expected. (orig.) [de

  13. RCRA Part B permit modifications for cost savings and increased flexibility at the Rocky Flats Environmental Technology Site

    International Nuclear Information System (INIS)

    Jierree, C.; Ticknor, K.

    1996-10-01

    With shrinking budgets and downsizing, a need for streamlined compliance initiatives became evident at the Rocky Flats Environmental Technology Site (RFETS). Therefore, Rocky Mountain Remediation Services (RMRS) at the RFETS successfully and quickly modified the RFETS RCRA Part B Permit to obtain significant cost savings and increased flexibility. This 'was accomplished by requesting operations personnel to suggest changes to the Part B Permit which did not diminish overall compliance and which would be most. cost beneficial. The U.S. Department of Energy (DOE) subsequently obtained approval of those changes from the Colorado Department of Public Health and the Environment (CDPHE)

  14. The potential for modification in cloning and vitrification technology to enhance genetic progress in beef cattle in Northern Australia.

    Science.gov (United States)

    Taylor-Robinson, Andrew W; Walton, Simon; Swain, David L; Walsh, Kerry B; Vajta, Gábor

    2014-08-01

    Recent advances in embryology and related research offer considerable possibilities to accelerate genetic improvement in cattle breeding. Such progress includes optimization and standardization of laboratory embryo production (in vitro fertilization - IVF), introduction of a highly efficient method for cryopreservation (vitrification), and dramatic improvement in the efficiency of somatic cell nuclear transfer (cloning) in terms of required effort, cost, and overall outcome. Handmade cloning (HMC), a simplified version of somatic cell nuclear transfer, offers the potential for relatively easy and low-cost production of clones. A potentially modified method of vitrification used at a centrally located laboratory facility could result in cloned offspring that are economically competitive with elite animals produced by more traditional means. Apart from routine legal and intellectual property issues, the main obstacle that hampers rapid uptake of these technologies by the beef cattle industry is a lack of confidence from scientific and commercial sources. Once stakeholder support is increased, the combined application of these methods makes a rapid advance toward desirable traits (rapid growth, high-quality beef, optimized reproductive performance) a realistic goal. The potential impact of these technologies on genetic advancement in beef cattle herds in which improvement of stock is sought, such as in northern Australia, is hard to overestimate. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

  15. I governi di “popolo” e le istituzioni comunali nella seconda metà del secolo XIII

    Directory of Open Access Journals (Sweden)

    Enrico Artifoni

    2003-12-01

    Full Text Available Nella seconda metà del secolo XIII la cultura politica dei governi popolari si esprime in modo articolato e consapevole attraverso molteplici scelte: l’istituzione di organismi collegiali ristretti, la valorizzazione delle forme associative di quartiere o di rione, la “domanda” rivolta al ceto notarile di elaborare forme documentarie adeguate a un assetto istituzionale complesso qual era quello del comune duecentesco.

  16. The roles of weather modification technology in mitigation of the peat fires during a period of dry season in Bengkalis, Indonesia

    Science.gov (United States)

    Sandhyavitri, A.; Perdana, M. A.; Sutikno, S.; Widodo, F. H.

    2018-02-01

    The annual peat fire disasters have suffered human life, deteriorated peat land ecosystems, and caused severe economic losses in Indonesia, Malaysia, Brunei, and Singapore during a period of 2014-2016. The objective of this study is to investigate to what extent the weather modification technology (WMT) may play its roles in increasing the precipitation rates in order to mitigate the peat fires disaster in Bengkalis, Riau Province, Indonesia. The study obtained the precipitation rates data from the tropical rainfall measuring mission (TRMM) satellite during the period of 2014, 2015 and 2016. The data then statistically analyzed using the Grads software package. While the process of WMT at the designated research location was evaluated together between the Artificial Rain Unit of BPPT (Agency for the Assessment and Application Technology), and the Engineering Faculty, University of Riau, 2016. The research showed that the WMT increased the rainfall rates during the dry season within the study area by 8% (520.7 mm to 557 mm) in the 3 months period (July 14 -October 6, 2016), and reducing significantly hotspots by 88.6% from 6.725 in 2014 to 770 in 2016. Hence, it confirmed that the application of technical WMT procedures may increase precipitation rates and reduce the number of hot spots in Bengkalis.

  17. Del "scriptor" al "publicus notarius" : los escribanos de Madrid en el siglo XIII

    Directory of Open Access Journals (Sweden)

    María Teresa Carrasco Lazareno

    2003-01-01

    Full Text Available Estudio diplomático y jurídicoinstitucional de las escribanías de Madrid en el siglo XIII. Se analiza su evolución desde los primeros "Scriptores» prenotariales conocidos, clérigos y laicos de libre profesión, documentados hasta 1260, hasta la consolidación definitiva de la institución notarial y del instrumento público en el último cuarto del siglo XIII. Se estudian con detenimiento la compleja etapa de transición, en las décadas centrales de la centuria, la figura del «escrivano de congejo de Madrit», profesional estable y antecedente inmediato del escribano público, y la instauración del notariado, de acuerdo con la legislación alfonsina, así como de la escribanía municipal, por otorgamiento de Alfonso X, en 1264. A través de la documentación conservada, se analiza, asimismo, la transformación de la simple carta o «scriptura» testifical en «publicum instrumentum», mediante la valoración de la pervivencia de elementos tradicionales y la aparición de fórmulas diplomáticas que revelan la paulatina introducción.This is a diplomatic and a legal — institutional study about the actuarles offices in Madrid during the Xlllth century Its evolution is analyzed from the first known prenotarial "scriptores», priests and liberal professionals seculars, documented until 1260, until the final consolidation of the notary institution and the public instrument during the last quarter of the Xlllth century There is a detailed study about the complexity of the transitional period, during the central decades of that century, the figure of the «Notary of the Madrid Town Council», as a stable professional and immediate predecessor of the public actuary the establishment of the body of actuarles, according to the Alphonsine legislation, an the municipal actuary office, established by King Alphonse Xth., in 1264. Through the preserved documentation, it is analized, at the same time, the transformation of the simple letter, or

  18. Safety of Factor XIII Concentrate: Analysis of More than 20 Years of Pharmacovigilance Data

    Science.gov (United States)

    Solomon, Cristina; Korte, Wolfgang; Fries, Dietmar; Pendrak, Inna; Joch, Christine; Gröner, Albrecht; Birschmann, Ingvild

    2016-01-01

    Background Plasma-derived factor XIII (FXIII) concentrate is an effective treatment for FXIII deficiency. We describe adverse drug reactions (ADRs) reported during pharmacovigilance monitoring of Fibrogammin®/Corifact® and review published safety data. Methods Postmarketing safety reports recorded by CSL Behring from June 1993 to September 2013 were analyzed. Clinical studies published during the same period were also reviewed. Results Commercial data indicated that 1,653,450,333 IU FXIII concentrate were distributed over the review period, equivalent to 1,181,036 doses for a 70 kg patient. 75 cases were reported (one/15,700 standard doses or 22,046,000 IU). Reports of special interest included 12 cases of possible hypersensitivity reactions (one/98,400 doses or 137,787,500 IU), 7 with possible thromboembolic events (one/168,700 doses or 236,207,200 IU), 5 of possible inhibitor development (one/236,200 doses or 330,690,100 IU), and 20 of possible pathogen transmission (one/59,100 doses or 82,672,500 IU). 19 pathogen transmission cases involved viral infection; 4 could not be analyzed due to insufficient data, but for all others a causal relationship to the product was assessed as unlikely. A review of published literature revealed a similar safety profile. Conclusion Assessment of ADRs demonstrated that FXIII concentrate carries a low risk of ADRs across various clinical situations, suggesting a favorable safety profile. PMID:27781024

  19. Tres Violantes: las mujeres de una familia en el poder a lo largo del siglo XIII

    Directory of Open Access Journals (Sweden)

    Fuente Pérez, María Jesús

    2016-06-01

    Full Text Available The power of women, in particular the power of queens, has been a topic of great interest to historians, medievalists in particular; though much has been written about the subject, many questions remain. “Three Violantes” will look at the role of two Iberian queens and one Spanish princess in the thirteenth century Iberian kingdoms. In England and in other European kingdoms of that time, queens had lost authority and their agency was limited to the power of intercession and mediation, I will try to determine whether this also holds true for the Iberian queens.El interés por el tema del poder de las mujeres, en particular de las reinas, ha planteado muchos interrogantes sobre la naturaleza de ese poder. “Tres Violantes” examina la participación de dos reinas y una infanta de una misma familia, en aspectos diversos de la vida de las coronas de Aragón y Castilla en el siglo XIII, con el objetivo de apreciar si el papel de las reinas hispanas, en particular su participación política, siguió un camino similar al de las reinas de ese tiempo que, como bien se ha estudiado para las inglesas, fueron perdiendo autoridad y se vieron limitadas a ejercer poder a través de la intercesión y mediación.

  20. Ressenya a Ovidio Cuella Esteban i Juan B. Simó Castillo, Bulario de Benedicto XIII (1394-1423. VI. Diócesis de Tortosa. Maestrazgo de Santa María de Montesa. Testamento de Benedicto XIII, Peníscola, Associació ‘Amics del Papa Luna’, 2013, pp. 680, ISBN 978-84-616-7651-4

    Directory of Open Access Journals (Sweden)

    Blai Josep Server Server

    2014-12-01

    Full Text Available Review to Ovidio Cuella Esteban i Juan B. Simó Castillo, Bulario de Benedicto XIII (1394-1423. VI. Diócesis de Tortosa. Maestrazgo de Santa María de Montesa. Testamento de Benedicto XIII, Peníscola, Associació ‘Amics del Papa Luna’, 2013, pp. 680, ISBN 978-84-616-7651-4

  1. Radiation modification of materials

    International Nuclear Information System (INIS)

    Pikaev, A.K.

    1987-01-01

    Industrial and radiation chemical processes of material modification based on cross-linking of polymers as a result of radiation are considered. Among them are production of cables and rods with irradiated modified insulation, production of hardened and thermo-shrinkaging polymer products (films, tubes, fashioned products), production of radiation cross-linked polyethylene foam, technology of radiation vulcanization of elastomers. Attention is paid to radiation plants on the basis of γ-sources and electron acceleratos as well as to radiation conditions

  2. EVALUASI PENGENDALIAN INTERNAL TERHADAP PENERIMAAN DAN PENGELUARAN KAS PADA PT PLN (PerseroUNIT INDUK PEMBANGUNAN XIII MAKASSAR

    Directory of Open Access Journals (Sweden)

    ESTER DEWI

    2017-05-01

    There is also the purpose of writing is: 1 .To analyze the structure of the organization, 2. Analyze the system mechanisms and procedures for cash receipts and expenditure, 3 Analyze healthy practice associated with research at PT PLN (Persero Parent Unit XIII development Makassar. The purpose of writing, 4. Analyzing the quality and reliability of employees in his work responsibility. The methodology used is the research field research and questionnaires while the analysis used was a descriptive comparative analysis aims to describe the activities of the company, especially in the Internal Control System Cash Receipts and Expenditure.

  3. Repletion of factor XIII following cardiopulmonary bypass using a recombinant A-subunit homodimer. A preliminary report

    DEFF Research Database (Denmark)

    Levy, Jerrold H; Gill, Ravi; Nussmeier, Nancy A

    2009-01-01

    Bleeding following cardiac surgery involving cardiopulmonary bypass (CPB) remains a major concern. Coagulation factor XIII (FXIII) functions as a clot-stabilising factor by cross-linking fibrin. Low post-operative levels of FXIII correlate with increased post-operative blood loss. To evaluate...... preliminary safety and pharmacokinetics of recombinant FXIII (rFXIII-A(2)) in cardiac surgery, patients scheduled for coronary artery bypass grafting were randomised to receive a single dose of either rFXIII-A(2) (11.9, 25, 35 or 50 IU/kg) or placebo in a 4:1 ratio. Study drug was given post-CPB within 10...

  4. Radiation protection in the 2000s - Theory and practice. Nordic Society for Radiation Protection. Proceedings of the XIII ordinary meeting

    International Nuclear Information System (INIS)

    Paile, W.

    2003-06-01

    The XIII ordinary meeting of the Nordic Society for Radiation Protection (NSFS) was held on August 25-29, 2002 in Turku (Aabo), Finland. The main topics included: protection of the environment, information and ethics, natural radiation, reactor safety and waste management, emergency preparedness, medical use of radiation, radiation in industrial use, education and certification, radiation biology and epidemiology, and radioecology and monitoring. The proceedings of the meeting includes all the papers of the oral presentations as well as the poster presentations. Papers presenting scientific results have been subject to a referee process with evaluation of independent experts

  5. [Religion and healing in the XIII century: some considerations about therapy and holy medical observations in Iacopo da Varagine's Cronica Civitatis Ianuensis].

    Science.gov (United States)

    Moggia, Carlo

    2004-01-01

    The article is dedicated to recovery and holy therapy in Medieval society. In the XIII century Roman Church define the religious observations of physical and spiritual healing: the intervention of Saints and their holy miracles is very important for a perfect recovery. The article analyse the holy therapy through the study of the Cronica Civitatis Ianuensis read by the Dominican friar Iacopo da Varagine, at the end of the XIII century. This work represents one of the most important literary and hagiographic instrument to comprehend medical medieval imaginary.

  6. 合成革用水性聚氨酯树脂的改性研究进展%New Research Progress in the Modification Technology of Waterborne Polyurethane Resin Used for the Manufacture of Synthetic Leather

    Institute of Scientific and Technical Information of China (English)

    杨建军; 张建安; 吴庆云; 吴明元

    2013-01-01

    In this paper, the characteristics of waterborne polyurethane ( WPU) and its research progress of new technologies on modifying WPU resin were introduced. The main problems in the production and application of WPU resin used for the manufacture of synthetic leather were discussed. However, since the hydrophilic group is introduced into the molecules, WPU is weak in water resistance, solvent resistance, water vapor permeability, compatibility and rate of drying, hence the necessity of modifying WPU, such as the acrylate modification, organic silicon modification, organic fluorine modification, vegetable oil modification, epoxy resin modification, nanometer materials modification,and hyperbranched polymer modification,etc. The use of radiation technology, including radiation polymerization, crosslinking and curing, in copolymer latex is reviewed in the paper. The likely future trends of the modification design of WPU resin used for the manufacture of synthetic leather were described.%该文介绍了水性聚氨酯的性能特点以及改性新技术的研究进展.论述了合成革用水性聚氨酯树脂在生产和应用中存在的主要问题,由于分子中引入了亲水基团,水性聚氨酯树脂在耐水性、耐溶剂性、透气透湿性、配伍性和干燥速度等方面表现较差,需要对其进行改性研究,如采用丙烯酸酯改性、有机硅改性、有机氟改性、植物油改性、环氧树脂改性、纳米材料改性和超支化聚合物改性等,并讨论了辐射聚合、交联及固化等辐射技术在共聚物乳液制备上的研究及应用.最后对合成革用水性聚氨酯树脂改性设计的发展前景作了展望.

  7. Las tesis de los filósofos del siglo XIII que afirmaron la existencia del intelecto agente

    Directory of Open Access Journals (Sweden)

    Sellés, Juan Fernando

    2008-06-01

    Full Text Available In this article we review the statements of relevant philosophers of the XIIIeme century supporting the existence of the human agent intellect. Three groups can be distinguished: I The universal hylemorphism (Alexander of Hales, John de la Rochelle, Mathew of Acquasparta; II The synthesis between the augustinianism and the aristhotelism (Peter Hispanus, Saint Bonaventura, John Peckham; III The purified and advanced aristotelism (Albert the Great, Thomas Aquinas, Ramon Llull.

    En este trabajo se revisan las tesis de relevantes filósofos del s. XIII que defendieron la existencia del intelecto agente en el hombre. En el trabajo se dividen en tres grupos a los pensadores: I Los que se suelen encuadrar dentro del llamado hilemorfismo universal (Alejandro de Hales, Juan de la Rochela y Mateo de Acquasparta. II La síntesis entre el agustinismo y el aristotelismo (Pedro Hispano, San Buenaventura, Juan Peckham. III El aristotelismo depurado y proseguido (San Alberto Magno, Sto. Tomás de Aquino, Ramón Llull.

  8. Enzymatic modification of starch

    DEFF Research Database (Denmark)

    Jensen, Susanne Langgård

    In the food industry approaches for using bioengineering are investigated as alternatives to conventional chemical and physical starch modification techniques in development of starches with specific properties. Enzyme-assisted post-harvest modification is an interesting approach to this, since...... it is considered a clean and energy saving technology. This thesis aimed to investigate the effect of using reaction conditions, simulating an industrial process, for enzymatic treatment of starch with branching enzyme (BE) from Rhodothermus obamensis. Thus treatements were conducted at 70°C using very high...... substrate concentration (30-40% dry matter (DM)) and high enzyme activity (750-2250 BE units (BEU)/g sample). Starches from various botanical sources, representing a broad range of properties, were used as substrates. The effects of the used conditions on the BE-reaction were evaluated by characterization...

  9. Ion bombardment modification of surfaces

    International Nuclear Information System (INIS)

    Auciello, O.

    1984-01-01

    Ion bombardment-induced modification of surfaces may be considered one of the significant scientific and technological developments of the last two decades. The understanding acquired concerning the underlying mechanisms of several phenomena occurring during ion-surface interactions has led to applications within different modern technologies. These include microelectronics, surface acoustical and optical technologies, solar energy conversion, thin film technology, ion implantation metallurgy, nuclear track technology, thermonuclear fusion, vacuum technology, cold welding technology, biomedicine (implantology). It has become clear that information on many relevant advances, regarding ion bombardment modification of surfaces is dispersed among journals involving fields sometimes not clearly related. This may result, in some cases, in a loss of the type of interdisciplinary exchange of ideas, which has proved to be so fruitful for the advancement of science and technology. This book has been planned in an attempt to collect at least some of today's relevant information about the experimental and theoretical knowledge related to surface modification and its application to technology. (Auth.)

  10. Of decentralization of public power Ukrainian land that belonged to Lithuanian (XIII – the early XVII century

    Directory of Open Access Journals (Sweden)

    C. V. Manuilova

    2016-06-01

    Full Text Available A comprehensive crisis in Ukraine and continued military confrontation in the Donbass demonstrated the urgent need to establish effective governance, which would imply decentralization of public power. Note that in implementing the decentralization of power in Ukraine insists the International Monetary Fund; United Nations Development Program; the transfer of authority to the field and decentralization of power in Ukraine is one of the points of the Minsk agreements and obligations of Ukraine to the EU. The article deals with the Ukrainian lands topical issue features the decentralization of public power in the XIII - the beginning of XVII century. The importance of the topic due to the need to study the historical experience of the implementation of decentralization. It was, emphasized that the success of the reforms depends largely because of the historical experience and features of the decentralization of public power in the past. Characterized by the development of local government in the Ukrainian lands was part of the Lithuanian state. The purpose of the article is to clarify the characteristics of decentralization of public authority on Ukrainian lands were part of the Lithuanian state during the XVII century XIII. To address this goal, outline decentralization of public power in the state; analyze, competence of local government in the Ukrainian lands that belonged to the Lith uanian State; determine how close to the power of the people. The level of decentralization of public power in the Grand Duchy of Lithuania in the XIII - the beginning of XVII century was high. It was, found that Lithuania had not established a centralized state. It is, noted that the Board of the nobility limited the princely power. The effect of delegated deputies from different parts of the Lithuanian statehood solutions nobility Council.Clarified the facts that confirm the existence of decentralization of public power in Lithuania: the functioning of local

  11. Understanding the Effects of Defect Modification on the Structure and Properties of Fluorinated Polymers and Implications for Capacitive Energy Storage Technologies

    Science.gov (United States)

    Gadinski, Matthew R.

    As the world begins to turn to alternative energy technologies and our electronic devices have become more both mobile and integral to everyday life, increasing interest has been focused on energy storage technologies. Capacitors are one of these energy storage technologies that utilize the polarization of an insulating material sandwiched by two electrodes as a means to store electric charge. Polymers are a preferred dielectric material for capacitors because of both their performance and practicality. However, polymer dielectrics are limited in energy density by low dielectric constant, and high loss at elevated temperature. This work aims to address these issues in order to enable polymer dielectrics for future applications and demands. As most polymer tend to have low dielectric constants (˜2-3), but impressive breakdown strengths, only a moderate improvement in dielectric constant has the potential to vastly improve the energy density of polymer capacitors. As such tremendous interest has been placed on poly(vinylidene fluoride) (PVDF) which has a dielectric of 10+ due to the highly polar C-F bonds of its backbone. To improve PVDF's performance defect monomers have been introduced to tailor the polymorphic crystalline phase to tune its properties. Additionally, this defect modification has implications for piezoelectric, electrocaloric, and thermoelectric applications of PVDF. In Chapter 2 a copolymer of VDF and bromotrifluoroethylene (BTFE) was produced. The effect of BTFE on the structure and dielectric properties of the resulting copolymer had not been previously evaluated, and its synthesis allowed for the comparison to previously reported VDF based copolymers including P(VDF-CTFE) and P(VDF-HFP). Through 19F NMR it was determined due to reactivity ratio differences of BTFE in comparison to previously explored copolymers, BTFE during synthesis is much more likely to link with itself. This results in long runs of BTFE-BTFE defects along with isolated

  12. The Asamblea del Año XIII in the Rio de la Plata: Eternal Laurels to End the Revolution

    Directory of Open Access Journals (Sweden)

    Esteban Buch

    2016-09-01

    Full Text Available The Asamblea del año XIII, the 1813 Constitutional Assembly in the Río de la Plata, represents at its best revolutionary velocity, with its allegro rhythm towards wider liberties and a more perfect equality, towards an independence of the nation that, without being officially declared, inspires many of its gestures, like the creation of Argentina’s national anthem. A contemporary observer fond of anachronisms might find in it a confirmation that movement is an essential element of democracy. Yet, this dynamic perception should be balanced by reminding that the Assembly’s main project is not to accelerate the revolution, but to terminate it. “Close the period of the revolution, open the epoch of peace and freedom”, says its inaugural declaration. This paper focuses on the tension between these two conceptions of historical temporality.

  13. Proceedings of VII International Symposium on Nuclear and Related Techniques. XIII Workshop on Nuclear Physics. WONP-NURT 2011

    International Nuclear Information System (INIS)

    2011-02-01

    This year the XIII Workshop on Nuclear Physics (WONP) and the VII Symposium on Nuclear and Related Techniques (NURT) are organized jointly, by Instituto Superior de Tecnologias y Ciencias Aplicadas and Centro de Aplicaciones Tecnologicas y Desarrollo Nuclear. Both events gather scientists from several countries with top research work on nuclear physics and its applications. WONP has been carried out since 1994 promoting an ever-exchanging exchange between professionals of various nuclear and applied physics fields, those related to environmental and health care. NURT is one of the key Cuban scientific meetings since 1997 dealing with the peaceful applications of nuclear techniques in several domains of the society. WONP and NURT provide an unique opportunity for the national and international scientific community to meet outstanding researchers and discuss current trends in several areas of theoretical, experimental and applied nuclear physics and related topics. The papers submitted to this event are presented in this CD-ROM

  14. Patho-epidemiological study on Genotype-XIII Newcastle disease virus infection in commercial vaccinated layer farms

    Directory of Open Access Journals (Sweden)

    J. H. Khorajiya

    2015-03-01

    Full Text Available Aim: The present research work was carried out to study the patho-epidemiological aspects of Genotype-XIII Newcastle disease virus (NDV infection in commercial layer in and around Anand, Gujarat. As the outbreaks have reported in vaccinated flocks, it was felt necessary to study the disease with respect to its changing pathogenicity and relevant aspects. Materials and Methods: The study comprised of patho-epidemiology of Newcastle disease (ND by information collected from different layer farms suffering from the disease in relation to incidence pattern and mortality, duration of mortality, susceptible age, and loss due to production performance. Clinical signs were recorded based on observations. During postmortem, gross lesions were also recorded. For histopathological examination visceral organs according to lesions were collected in 10% formalin and processed slide stained by hematoxylin and eosin for microscopic examination. Cultivation of virus was done in embryonated specific pathogen-free (SPF eggs of 9-11 days and isolation of virus was done for haemagglutination (HA and haemagglutination inhibition (HI test and to identify pathotype of virus by intracerebral pathogenicity index (ICPI test to determine the virulence of virus. The Genotype-XIII NDV was confirmed by F gene sequence and whole genome sequence. Results: During the study mortality due to ND was recorded in 13 layer flocks in spite of routine vaccination, which usually contain Genotype-II strain of virus. The mortality was observed as high as above 50% with an average of 21.21%. The susceptible age for disease was found to be 6-14 weeks. The duration of mortality observed was 23 days. The disease resulted in a significant reduction in body weight, feed intake and drop in egg production. Majority of the outbreaks appeared during extremely hot months of April to June. Greenish diarrhoea was frequently seen in birds that survived early in infection. Mortality continued for 2

  15. El consulado genovés de Sevilla (siglos XIII-XV. Aspectos jurisdiccionales, comerciales y fiscales

    Directory of Open Access Journals (Sweden)

    José Damián GONZÁLEZ ARCE

    2011-02-01

    Full Text Available El presente artículo analiza el funcionamiento del consulado genovés de Sevilla, entre los siglos XIII y XV, a partir de los privilegios concedidos por los reyes castellanos y otros documentos donde se contienen noticias sobre la actividad de estos italianos. En primer lugar, se estudian las competencias jurisdiccionales de dicho consulado y las facultades judiciales de sus cónsules. Luego son descritas las actividades mercantiles de la colonia ligur en el marco del consulado, así como otros aspectos ligados al comercio, como seguros y transportes. Y, finalmente, las exacciones fiscales a las que fueron sometidas esta colonia y las mercancías con las que traficó.

  16. Technical support for the Ohio Clean Coal Technology Program. Volume 2, Baseline of knowledge concerning process modification opportunities, research needs, by-product market potential, and regulatory requirements: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Olfenbuttel, R.; Clark, S.; Helper, E.; Hinchee, R.; Kuntz, C.; Means, J.; Oxley, J.; Paisley, M.; Rogers, C.; Sheppard, W.; Smolak, L. [Battelle, Columbus, OH (United States)

    1989-08-28

    This report was prepared for the Ohio Coal Development Office (OCDO) under Grant Agreement No. CDO/R-88-LR1 and comprises two volumes. Volume 1 presents data on the chemical, physical, and leaching characteristics of by-products from a wide variety of clean coal combustion processes. Volume 2 consists of a discussion of (a) process modification waste minimization opportunities and stabilization considerations; (b) research and development needs and issues relating to clean coal combustion technologies and by-products; (c) the market potential for reusing or recycling by-product materials; and (d) regulatory considerations relating to by-product disposal or reuse.

  17. Modification of Material Surface Using Plasma-Enhanced Ion Beams

    National Research Council Canada - National Science Library

    Bystritskii, V

    1998-01-01

    ...) Technology for Materials Surface Modification. Following second year programmatic plan, formulated in the conclusion of the 1-st year report we focused our effort on study of aluminum alloys modification (Al2024, 6061, 7075...

  18. PREFACE: XIII International Conference on Calorimetry in High Energy Physics (CALOR 2008)

    Science.gov (United States)

    Livan, Michele

    2009-07-01

    The XIII International Conference on Calorimetry in High Energy Physics was held in Pavia, Italy, 26-30 May 2008, picking up the baton from the 2006 Conference in Chicago. The Conference took place in the unique environment of the Theresian Room of the University Library. The attendees were surrounded by over 40 000 books of general interest and culture, and had the opportunity to see precious volumes written by such people as Galileo, Volta and Faraday. The Workshop brought together more than 120 participants, including senior scientists as well as young physicists, confirming the central and ever-growing role of calorimeters in modern particle physics. The development of these detectors, as stressed by Professor Klaus Pretzl in his lectio magistralis, has made it possible to explore new frontiers in physics, and the present scenario is no exception to this rule. With the LHC experiments almost completely installed and ready to take data, the Conference was an ideal chance to review the status of the different projects, whose development has been followed and discussed throughout the entire Calor series, and to show that they are capable of meeting the design specifications. Other highlights were the performance and physics results of calorimeters installed in currently operating experiments. In the session on astrophysics and neutrinos, the contributions confirmed the key role of calorimeters in this sector and demonstrated their growing application even beyond the field of accelerator physics. Considerable time was devoted to the state-of-the-art techniques in the design and operation of the detectors, while the session on simulation addressed the importance of a thorough understanding of the shower development to meet the demanding requirements of present experiments. Finally, on the R&D side, the particle flow and dual read-out concepts confronted the challenges issued by the next generation of experiments. This complex material was reviewed in 83

  19. La formazione di un’aristocrazia: monache e monasteri femminili a Venezia tra IX e XIII secolo

    Directory of Open Access Journals (Sweden)

    Rapetti, Anna

    2014-06-01

    Full Text Available This paper examines the processes that shaped the identity of the Venetian aristocracy from the 9th to the 13th centuries and the role played by the relationship between patrician families and some female monasteries. The important female monastery of San Zaccaria and some other nunneries created in the lagoon between the 12th and the 13th centuries are taken into account in the analysis of the formation of Venetian aristocracy from this innovative perspective. By analysing the behaviour of the aristocratic families towards these nunneries, the paper points out how Venetian ruling groups made use of the long-term relationship with nuns as a particularly useful instrument of political competition. The article also shows how some female monasteries were relevant social actors in the process of defi nition of Venetian identity, largely coinciding with their own ruling groups, and in particular with the aristocracy, and with the exercise of power.[it] L’articolo si propone di esaminare il processo di definizione dell’identità del ceto dirigente di Venezia nel periodo IX-XIII secolo e il ruolo occupato dalle relazioni tra le famiglie dell’aristocrazia che costituivano quel ceto e alcuni monasteri femminili. In questa prospettiva, innovativa nell’analisi della formazione dell’aristocrazia di Venezia, si prenderà in esame l’importante monastero femminile di San Zaccaria e si farà inoltre riferimento ad alcuni altri, sorti sulle isole della laguna tra XII e XIII secolo, espressione di un clima religioso e sociale nuovo e particolare. Attraverso l’analisi dei comportamenti adottati dalle famiglie aristocratiche nei confronti di questi monasteri, si dimostra che il ceto dirigente veneziano si servì delle relazioni costanti con le monache come di uno strumento della lotta politica particolarmente utilizzato dalle famiglie dell’aristocrazia della città. Si osserva anche che alcuni monasteri femminili furono a loro volta soggetti attivi

  20. Compressed Air System Modifications Improve Efficiency at a Plastics Blow Molding Plant (Southeastern Container Plant): Office of Industrial Technologies (OIT) BestPractices Technical Case Study

    Energy Technology Data Exchange (ETDEWEB)

    Wogsland, J.

    2001-06-18

    This case study is one in a series on industrial firms who are implementing energy efficient technologies and system improvements into their manufacturing processes. This case study documents the activities, savings, and lessons learned on the plastics blow molding plant project.

  1. Evaluating Factor XIII Specificity for Glutamine-Containing Substrates Using a MALDI-TOF Mass Spectrometry Assay

    Science.gov (United States)

    Doiphode, Prakash G.; Malovichko, Marina V.; Mouapi, Kelly Njine; Maurer, Muriel C.

    2014-01-01

    Activated Factor XIII (FXIIIa) catalyzes the formation of γ-glutamyl-ε-lysyl cross-links within the fibrin blood clot network. Although several cross-linking targets have been identified, the characteristic features that define FXIIIa substrate specificity are not well understood. To learn more about how FXIIIa selects its targets, a matrix-assisted laser desorption ionization – time of flight mass spectrometry (MALDI-TOF MS) based assay was developed that could directly follow the consumption of a glutamine-containing substrate and the formation of a cross-linked product with glycine ethylester. This FXIIIa kinetics assay is no longer reliant on a secondary coupled reaction, on substrate labeling, or on detecting the final deacylation portion of the transglutaminase reaction. With the MALDI-TOF MS assay, glutamine-containing peptides derived from α2-antiplasmin, S. Aureus fibronectin binding protein A, and thrombin activatable fibrinolysis inhibitor were examined directly. Results suggest that the FXIIIa active site surface responds to changes in substrate residues following the reactive glutamine. The P-1 substrate position is sensitive to charge character and the P-2 and P-3 to the broad FXIIIa substrate specificity pockets. The more distant P-8 to P-11 region serves as a secondary substrate anchoring point. New knowledge on FXIIIa specificity may be used to design better substrates or inhibitors of this transglutaminase. PMID:24751466

  2. Behavior Modification in Coaching.

    Science.gov (United States)

    Lynch, Annette Rutt; Stillman, Stephen M.

    1979-01-01

    An example of behavior modification used in athletic coaching is presented. The case study involves a member of a women's basketball team and details the use of behavior modification for both weight reduction and skill improvement. (JMF)

  3. [Microcrystalline cellulose and their flow -- morphological properties modifications as an effective excpients in tablet formulation technology containing lattice established API and also dry plant extract].

    Science.gov (United States)

    Zgoda, Marian Mikołaj; Nachajski, Michał Jakub; Kołodziejczyk, Michał Krzysztof

    2009-01-01

    The production technology of powder cellulose (Arbocel) and microcrystaline cellulose (Vivapur) and their application in the composition of direct compression tablet mass was provided. The function of silicified microcrystaline cellulose type Prosolv in the direct compression process of dry plant extract was discussed. An analysis of the chemical structure of cellulose fiber (Vitacel) enabled determining its properties and applications in the manufacture of diet supplement, pharmaceutical and food products.

  4. Console modification in the video game industry an empirical study of the technological protection measure reforms of the Australian Copyright Act 1968 (Cth)

    OpenAIRE

    Raval, Melchor Inigo

    2017-01-01

    The Australian-United States Free Trade Agreement expanded the access rights provisions, including the technological protection measures (TPM) and anti-circumvention prohibitions in the Copyright Act 1968 (Cth), to address the unauthorised distribution of copyrighted content, colloquially referred to as piracy. Copyright users object to these "paracopyright" principles being implemented as criminal penalties and restrictive Digital Rights Management (DRM). Evidence that piracy has persisted...

  5. 2015 Edition Health Information Technology (Health IT) Certification Criteria, 2015 Edition Base Electronic Health Record (EHR) Definition, and ONC Health IT Certification Program Modifications. Final rule.

    Science.gov (United States)

    2015-10-16

    This final rule finalizes a new edition of certification criteria (the 2015 Edition health IT certification criteria or "2015 Edition'') and a new 2015 Edition Base Electronic Health Record (EHR) definition, while also modifying the ONC Health IT Certification Program to make it open and accessible to more types of health IT and health IT that supports various care and practice settings. The 2015 Edition establishes the capabilities and specifies the related standards and implementation specifications that Certified Electronic Health Record Technology (CEHRT) would need to include to, at a minimum, support the achievement of meaningful use by eligible professionals (EPs), eligible hospitals, and critical access hospitals (CAHs) under the Medicare and Medicaid EHR Incentive Programs (EHR Incentive Programs) when such edition is required for use under these programs.

  6. Materiales y técnicas constructivas en la Murcia andalusí (siglos X-XIII

    Directory of Open Access Journals (Sweden)

    Navarro Palazón, Julio

    2011-12-01

    Full Text Available The evolution of the materials and building techniques of the andalusian city of Murcia between the 9th and 13th centuries are here studied, mainly based on the new information provided by the numerous archaeological excavations that have been carried out in the city for the last thirty years, related especially to residential architecture. After its accuracy analysis, some differences between the buildings techniques manufactured in the 10th and 11th centuries and those later attributed to 12th and 13th centuries have been identified, being thus highly important to describe them by remarking at the same time those distinguishing features. Problems related to the absolute chronology of these building techniques are also discussed, highlighting the definitive information currently known. With the main aim of analysing how general these remarks are or, on the contrary, if they depend on the regionalization phenomenon characterizing the andalusian recording material, we will compare the information obtained in Murcia with those coming from other andalusian sites, located these far away from the studied area. Finally, we will check if there are differences between the rural and urban environments by comparing the materials and building techniques recorded in two coetaneous sites in Murcia, both sited close to the same river Segura and 40 km distant from each other: the city of Murcia (a large madîna and the deserted settlement of Siyâsa (a hisn.En el presente trabajo estudiamos la evolución de los materiales y técnicas constructivas en la Murcia andalusí, durante un periodo de tiempo que se extiende entre los siglos X y XIII, para lo que nos basaremos especialmente en la rica información extraída de las numerosas excavaciones efectuadas en dicha ciudad, que se refiere sobre todo a arquitectura residencial. Tras su exhaustivo análisis hemos identificado algunas diferencias entre las fábricas de los siglos X y XI y las posteriores de los

  7. Castillos, poder feudal y reorganización espacial en la Transierra madrileña (siglos XII-XIII

    Directory of Open Access Journals (Sweden)

    Iñaki Martín Viso

    2000-01-01

    Full Text Available Algunos castillos de la Transierra madrileña en los siglos xii y xiii son herederos de los husün musulmanes, pero se convierten en esa época en centros de poder señorial sobre unas débiles comunidades. No obstante, sólo su transformación en concejos permitirá la supervivencia de algunos de ellos, aunque se observa también un desplazamiento del habitat hacia el llano, resultado de la formación de un nuevo sistema productivo basado en la agricultura cerealfstica y la propiedad feudal, por lo que el papel de los castillos es limitado. En las zonas serranas su relevancia es aún menor y nunca estructuraron el paisaje, labor que ejercieran los sexmos de la Tierra de Segovia.Some castles of the Madrid's Transierra in the xii"" and xiif" centuries are inheritors of the muslim husün, but they viere converted during this age in centres of a lordship power which was imposed to the weak communities. However, only some of them could survive through their conversión In town counciis (concejos, although there is also an habitat's displacement to the plain, that is the result of the new producing system based on the grain agrículture and the feudal property, so the role of the castles was reduced. In the mountain áreas the landscape was never structured by castles, but by the rural distrícts (sexmos ofthe Segovia's Land.

  8. Cre/lox Studies Identify Resident Macrophages as the Major Source of Circulating Coagulation Factor XIII-A.

    Science.gov (United States)

    Beckers, Cora M L; Simpson, Kingsley R; Griffin, Kathryn J; Brown, Jane M; Cheah, Lih T; Smith, Kerrie A; Vacher, Jean; Cordell, Paul A; Kearney, Mark T; Grant, Peter J; Pease, Richard J

    2017-08-01

    To establish the cellular source of plasma factor (F)XIII-A. A novel mouse floxed for the F13a1 gene, FXIII-A flox/flox (Flox), was crossed with myeloid- and platelet-cre-expressing mice, and cellular FXIII-A mRNA expression and plasma and platelet FXIII-A levels were measured. The platelet factor 4-cre.Flox cross abolished platelet FXIII-A and reduced plasma FXIII-A to 23±3% ( P cre on plasma FXIII-A was exerted outside of the megakaryocyte lineage because plasma FXIII-A was not reduced in the Mpl -/- mouse, despite marked thrombocytopenia. In support of this, platelet factor 4-cre depleted FXIII-A mRNA in brain, aorta, and heart of floxed mice, where FXIII-A pos cells were identified as macrophages as they costained with CD163. In the integrin αM-cre.Flox and the double copy lysozyme 2-cre.cre.Flox crosses, plasma FXIII-A was reduced to, respectively, 75±5% ( P =0.003) and 30±7% ( P <0.001), with no change in FXIII-A content per platelet, further consistent with a macrophage origin of plasma FXIII-A. The change in plasma FXIII-A levels across the various mouse genotypes mirrored the change in FXIII-A mRNA expression in aorta. Bone marrow transplantation of FXIII-A +/+ bone marrow into FXIII-A -/- mice both restored plasma FXIII-A to normal levels and replaced aortic and cardiac FXIII-A mRNA, while its transplantation into FXIII-A +/+ mice did not increase plasma FXIII-A levels, suggesting that a limited population of niches exists that support FXIII-A-releasing cells. This work suggests that resident macrophages maintain plasma FXIII-A and exclude the platelet lineage as a major contributor. © 2017 The Authors.

  9. Esclavos musulmanes en los hospitales de cautivos de la Orden Militar de Santiago (siglos XII y XIII

    Directory of Open Access Journals (Sweden)

    Echevarría Arsuaga, Ana

    2007-12-01

    Full Text Available Military Orders had slave manpower in their lands since their foundation. However, the hospitals for ransoming captives owned by the Order of Santiago are the best example of how slavery worked in the kingdom of Leon-Castile during the twelfth and thirteenth centuries. These houses had enough room to provide lodging for captives while ransoms were being negotiated. They also helped to redistribute those Muslims who, lacking this possibility, became slaves of the order itself, or were sold in the slave markets of the kingdom. The scarce records kept in the Archivo Histórico Nacional, section Órdenes Militares, referring to slaves, help to understand the development of traffic, work and manumission of these people.

    Las órdenes militares dispusieron desde su fundación de mano de obra esclava en sus tierras, pero la institución que mejor sirve para estudiar la esclavitud en los siglos XII y XIII en los reinos de León y Castilla son los hospitales para la redención de cautivos de la Orden de Santiago. Estas instituciones disponían de espacio para alojar a los cautivos mientras se negociaban rescates con los poderes islámicos, y atendían a la redistribución de aquellos musulmanes que, por no haber sido redimidos, pasaban a ser esclavos de la propia orden o a ser vendidos en los mercados de los reinos cristianos. Los escasos documentos de la sección de Órdenes Militares del Archivo Histórico Nacional dedicados a esclavos ayudan a comprender el funcionamiento del tráfico, trabajo y liberación de este colectivo.

  10. MODIFICATION OF PAPERMAKING GRADE FILLERS: A BRIEF REVIEW

    Directory of Open Access Journals (Sweden)

    Jing Shen

    2009-08-01

    Full Text Available The use of fillers in paper products can provide cost and energy savings, improved paper properties, increased productivities, and specifically desired paper functionalities. There are many problems associated with the use of fillers, such as unsuitability of calcium carbonate fillers in acid papermaking, negative effects of filler loading on paper strength, sizing, and retention, and tendencies of fillers to cause abrasion and dusting. In order to solve these problems and to make better use of fillers, many methods have been proposed, among which filler modification has been a hot topic. The available technologies of filler modification mainly include modification with inorganic substances, modification with natural polymers or their derivatives, modification with water-soluble synthetic polymers, modification with surfactants, modification with polymer latexes, hydrophobic modification, cationic modification, surface nano-structuring, physical modification by compressing, calcination or grinding, and modification for use in functional papers. The methods of filler modification can provide improved acid tolerant and optical properties of fillers, enhanced fiber-filler bonding, improved filler retention and filler sizabilities, alleviated filler abrasiveness, improved filler dispersability, and functionalization of filled papers. Filler modification has been an indispensable way to accelerate the development of high filler technology in papermaking, which is likely to create additional benefits to papermaking industry in the future.

  11. La expansión del posesivo pospuesto a la luz de documentación navarra (y aragonesa) del siglo XIII

    OpenAIRE

    Romero Cambrón, Angeles

    2016-01-01

    En los primitivos documentos romances el posesivo sólo aparece antepuesto al sustantivo (“(el) nuestro padre”). La posposición (“padre nuestro”) se empieza a registrar en el siglo XIII en aragonés y en dialecto navarro. Considerando principalmente la documentación de esta segunda variedad, el presente trabajo tiene como objetivo determinar el modo en que el posesivo adquirió la capacidad de aparecer pospuesto. Este cambio se vio impulsado por factores de naturaleza estructural. Uno de ellos e...

  12. Energy Levels and Radiative Rates for Transitions in F-like Sc XIII and Ne-like Sc XII and Y XXX

    Directory of Open Access Journals (Sweden)

    Kanti M. Aggarwal

    2018-05-01

    Full Text Available Energy levels, radiative rates and lifetimes are reported for F-like Sc XIII and Ne-like Sc XII and Y XXX for which the general-purpose relativistic atomic structure package (GRASP has been adopted. For all three ions, limited data exist in the literature but comparisons have been made wherever possible to assess the accuracy of the calculations. In the present work, the lowest 102, 125 and 139 levels have been considered for the respective ions. Additionally, calculations have also been performed with the flexible atomic code (FAC to (particularly confirm the accuracy of energy levels.

  13. Energy Levels and Radiative Rates for Transitions in F-like Sc XIII and Ne-like Sc XII and Y XXX

    Science.gov (United States)

    Aggarwal, Kanti

    2018-05-01

    Energy levels, radiative rates and lifetimes are reported for F-like Sc~XIII and Ne-like Sc~XII and Y~XXX for which the general-purpose relativistic atomic structure package ({\\sc grasp}) has been adopted. For all three ions limited data exist in the literature but comparisons have been made wherever possible to assess the accuracy of the calculations. In the present work the lowest 102, 125 and 139 levels have been considered for the respective ions. Additionally, calculations have also been performed with the flexible atomic code ({\\sc fac}) to (particularly) confirm the accuracy of energy levels.

  14. Scientific session NRNU MEPHI-2010. XIII International Telecommunication Conference of students and young scientists Young people and science. Book of abstracts. In three parts. Part 1

    International Nuclear Information System (INIS)

    2010-01-01

    In the collection of works there are the abstracts of reports included in the program of XIII International Telecommunication Conference of students and young scientists Young people and science which took place in the Internet in November-December, 2009 on the NRNU MEPhI site http://www.molod.mephi.ru/. The topics of the conference cover a wide range of problems: applied physics and energetics, ecology, development of new materials, medical physics, nanotechnologies, automatics and electronics, information-telecommunication systems and others [ru

  15. Thermosense XIII; Proceedings of the Meeting, Orlando, FL, Apr. 3-5, 1991

    Science.gov (United States)

    Baird, George S.

    The present conference on thermosensing technologies discusses topics in predictive maintenance, architectural and structural applications, product and processing applications, material diagnostics, and laboratory researches. Attention is given to IR thermography for pipeline leak detection, thermal analyses of masonry block buildings during construction, thermography for electronic component lifetime prediction, time-resolved videothermography, and vibrothermographic-thermoelastic NDE of advanced composites. Also discussed are pulse-video thermography, time-resolved IR radiometry, quantitative thermal gradient imaging, automated image processing of IR thermography, and algorithms for IR pyrometry.

  16. Personalizing and Contextualizing Multimedia Case Methods in University-based Teacher Education: An Important Modification for Promoting Technological Design in School Science

    Science.gov (United States)

    Bencze, Larry; Hewitt, Jim; Pedretti, Erminia

    2009-01-01

    Results of various studies suggest that multimedia ‘case methods’ (activities associated with case documentaries) have many benefits in university-based teacher education contexts. They can, for example, help to ‘bridge the gap’ between perspectives and practices held by academic teacher educators and those held by student-teachers - who may adhere to perspectives and practices commonly supported in schools. On the other hand, some studies, along with theoretical arguments, suggest that there are limits to the effectiveness of multimedia case methods - because, for example, they can never fully represent realities of teaching and learning in schools. Furthermore, often missing from multimedia case methods is the student-teacher in the role of teacher. To address these concerns, we modified an existing multimedia case method by associating it with a special practice teaching situation in a school context. Qualitative data analyzed using constant comparative methods suggest that student-teachers engaged in this modified multimedia case method developed relatively deep commitments to encouraging students to conduct technology design projects - a non-traditional practice in school science. Factors that appeared to influence development of this motivation included student-teachers’ pre-instructional perspectives about science and the personalization and contextualization inherent to the modified multimedia case method.

  17. Ion bombardment modification of surfaces

    International Nuclear Information System (INIS)

    Auciello, O.

    1984-01-01

    An historical overview of the main advances in the understanding of bombardment-induced surface topography is presented. The implantation and sputtering mechanisms which are relevant to ion bombardment modification of surfaces and consequent structural, electronic and compositional changes are described. Descriptions of plasma and ion-beam sputtering-induced film formation, primary ion-beam deposition, dual beam techniques, cluster of molecule ion-beam deposition, and modification of thin film properties by ion bombardment during deposition are presented. A detailed account is given of the analytical and computational modelling of topography from the viewpoint of first erosion theory. Finally, an account of the possible application and/or importance of textured surfaces in technologies and/or experimental techniques not considered in previous chapters is presented. refs.; figs.; tabs

  18. Permit application modifications

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    This document contains the Permit Application Modifications for the Y-12 Industrial Landfill V site on the Oak Ridge Reservation. These modifications include the assessment of stability of the proposed Landfill V under static and loading conditions. Analyses performed include the general slope stability, veneer stability of the bottom liner and cover system, and a liquefaction potential assessment of the foundation soils.

  19. The management of modifications

    International Nuclear Information System (INIS)

    Bernard, C.

    1992-01-01

    Description of the management methods of modifications at EDF. To maintain safety standards of the nuclear power station the 'Direction de l'Equipment' and the 'Direction du Parc en Exploitation' have jointly fixed the modalities of management for all modifications and recorded them in a 'Practical Guide'

  20. Permit application modifications

    International Nuclear Information System (INIS)

    1995-11-01

    This document contains the Permit Application Modifications for the Y-12 Industrial Landfill V site on the Oak Ridge Reservation. These modifications include the assessment of stability of the proposed Landfill V under static and loading conditions. Analyses performed include the general slope stability, veneer stability of the bottom liner and cover system, and a liquefaction potential assessment of the foundation soils

  1. Clot retraction is mediated by factor XIII-dependent fibrin-αIIbβ3-myosin axis in platelet sphingomyelin-rich membrane rafts.

    Science.gov (United States)

    Kasahara, Kohji; Kaneda, Mizuho; Miki, Toshiaki; Iida, Kazuko; Sekino-Suzuki, Naoko; Kawashima, Ikuo; Suzuki, Hidenori; Shimonaka, Motoyuki; Arai, Morio; Ohno-Iwashita, Yoshiko; Kojima, Soichi; Abe, Mitsuhiro; Kobayashi, Toshihide; Okazaki, Toshiro; Souri, Masayoshi; Ichinose, Akitada; Yamamoto, Naomasa

    2013-11-07

    Membrane rafts are spatially and functionally heterogenous in the cell membrane. We observed that lysenin-positive sphingomyelin (SM)-rich rafts are identified histochemically in the central region of adhered platelets where fibrin and myosin are colocalized on activation by thrombin. The clot retraction of SM-depleted platelets from SM synthase knockout mouse was delayed significantly, suggesting that platelet SM-rich rafts are involved in clot retraction. We found that fibrin converted by thrombin translocated immediately in platelet detergent-resistant membrane (DRM) rafts but that from Glanzmann's thrombasthenic platelets failed. The fibrinogen γ-chain C-terminal (residues 144-411) fusion protein translocated to platelet DRM rafts on thrombin activation, but its mutant that was replaced by A398A399 at factor XIII crosslinking sites (Q398Q399) was inhibited. Furthermore, fibrin translocation to DRM rafts was impaired in factor XIII A subunit-deficient mouse platelets, which show impaired clot retraction. In the cytoplasm, myosin translocated concomitantly with fibrin translocation into the DRM raft of thrombin-stimulated platelets. Furthermore, the disruption of SM-rich rafts by methyl-β-cyclodextrin impaired myosin activation and clot retraction. Thus, we propose that clot retraction takes place in SM-rich rafts where a fibrin-αIIbβ3-myosin complex is formed as a primary axis to promote platelet contraction.

  2. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  3. Effect of Factor XIII-A G185T Polymorphism on Visual Prognosis after Photodynamic Therapy for Neovascular Macular Degeneration

    Directory of Open Access Journals (Sweden)

    Francesco Parmeggiani

    2015-08-01

    Full Text Available Macular degenerations represent leading causes of central blindness or low vision in developed countries. Most of these severe visual disabilities are due to age-related macular degeneration (AMD and pathologic myopia (PM, both of which are frequently complicated by subfoveal choroidal neovascularization (CNV. Photodynamic therapy with verteporfin (PDT-V is still employed for CNV treatment in selected cases or in combined regimen. In Caucasian patients, the common polymorphism G185T of factor XIII-A gene (FXIII-A-G185T; rs5985 has been described as predictor of poor angiographic CNV responsiveness to PDT-V. Nevertheless, the prognostic implications of this pharmacogenetic determinant on long-term visual outcome after a PDT-V regimen have not been evaluated. We retrospectively selected Caucasian patients presenting with treatment-naive CNV and receiving standardized PDT-V protocol for two years. The study population included patients affected by subfoveal CNV secondary to AMD or PM. We assessed the correlations between the polymorphic allele T of FXIII-A-G185T and: (1 total number of photodynamic treatments; and (2 change in visual acuity from baseline to the end of the follow-up period. Considering a total study population of 412 patients with neovascular AMD or PM, the carriers of 185 T-allele of FXIII-A (GT or TT genotype received a higher number of photodynamic treatments than patients without it (GG wild-type genotype (p < 0.01; mean number of PDT-V: 5.51 vs. 3.76, respectively. Moreover, patients with 185 T-allele of FXIII-A had a more marked worsening of visual acuity at 24 months than those with the GG-185 wild genotype (p < 0.01; mean difference in logMAR visual acuity: 0.22 vs. 0.08, respectively. The present findings show that the G185T polymorphism of the FXIII-A gene is associated with significant differences in the long-term therapeutic outcomes of patients treated with standardized PDT-V protocol. The comprehensive appraisal of

  4. Modifications to POISSON

    International Nuclear Information System (INIS)

    Harwood, L.H.

    1981-01-01

    At MSU we have used the POISSON family of programs extensively for magnetic field calculations. In the presently super-saturated computer situation, reducing the run time for the program is imperative. Thus, a series of modifications have been made to POISSON to speed up convergence. Two of the modifications aim at having the first guess solution as close as possible to the final solution. The other two aim at increasing the convergence rate. In this discussion, a working knowledge of POISSON is assumed. The amount of new code and expected time saving for each modification is discussed

  5. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  6. Structural dynamic modification

    Indian Academy of Sciences (India)

    and stiffness matrices) andaor modal parameters, in order to acquire some ... For the above reasons, another modification approach is presented here ... The data necessary to solve the direct problem are dynamic behaviour of the original.

  7. Pragmatic Graph Rewriting Modifications

    OpenAIRE

    Rodgers, Peter; Vidal, Natalia

    1999-01-01

    We present new pragmatic constructs for easing programming in visual graph rewriting programming languages. The first is a modification to the rewriting process for nodes the host graph, where nodes specified as 'Once Only' in the LHS of a rewrite match at most once with a corresponding node in the host graph. This reduces the previously common use of tags to indicate the progress of matching in the graph. The second modification controls the application of LHS graphs, where those specified a...

  8. La Historia Roderici en su aspecto léxico: Estudio comparativo en relación con la Chronica Adefonsi Imperatoris y las crónicas hispanolatinas anteriores al siglo XIII

    Directory of Open Access Journals (Sweden)

    Estrella Pérez Rodríguez

    2013-06-01

    Full Text Available Este trabajo profundiza en el aspecto léxico de la Historia Roderici (y parcialmente también en el de la Chronica Adefonsi Imperatoris, teniendo como punto de comparación el resto de las crónicas hispanolatinas compuestas antes del siglo XIII. Se estudia la variedad del léxico empleado y su capacidad de innovación, dentro de la que se han identificado 66 términos no presentes en ninguna otra crónica hispana del período. El rastreo de estos vocablos en las fuentes medievales literarias europeas y en los diplomas hispanos ha llevado a observar que algunos no se utilizaron antes de finales del siglo XII, lo que apoya una fecha tardía para la obra. Asimismo el estudio ha permitido proponer alguna modificación en el texto editado de la Historia y también ha puesto en evidencia que su autor tenía un buen conocimiento del lenguaje notarial y procedía de la parte oriental de Hispania, muy posiblemente de la ya apuntada Nájera.Cet article présente une étude lexicale de l’Historia Roderici (et aussi partiellement de la Chronica Adefonsi imperatoris et la compare avec les autres chroniques hispaniques écrites avant le XIIIe siècle. Il souligne la richesse lexicale de l'œuvre, puisque l’Historia emploie 66 mots qui ne se trouvent pas ailleurs dans la production historiographique des royaumes espagnols de cette époque. L’auteur a étudié l’emploi de ces mots dans les textes littéraires écrits hors de la Péninsule Ibérique et dans les documents hispaniques et a vérifié que quelques uns n’apparaissent qu’à la fin du XIIe siècle. Ce résultat indique qu’une date de composition tardive de l’Historia est vraisemblable. L’étude propose aussi des modifications du texte de l’Historia tel qu'il a été édité jusqu'à présent, et démontre que l'auteur connaissait bien le langage notarial et qu’il était originaire de la partie orientale de l’Espagne, probablement de Nájera, comme on l'avait déjà avancé.

  9. Modification of JRR-2

    International Nuclear Information System (INIS)

    Miyasaka, Yasuhiko

    1978-01-01

    This report gives an outline of some of the main modifications carried out around the Reactor Core on the Research Reactor JRR-2, at the Tokai Research Establishment of JAERI. The JRR-2 was shut down in December 1973, to improve it in heavy water leakage from the metal packing between core tank and support ring, corrosion of the lower shielding plug, and fault in the control-rod mechanism. Main modifications were a standing seal weld at the support ring to stop heavy water leakage, replacement of the reactor top shield and improvement of the helium system. The control-rod assemblies and the refueling devices were replaced by the newly designed ones also. In addition to the modification plan, the irradiated air exhaust system was improved to reduce radioactive argon gas release through the stack. Works were completed successfully in September 1975. But a light water leakage occurred at the stand pipe below the light water tank on November 11, 1975, which was repaired in about 4 months. When considering the operation of above 5,000 hours after the modification, however, the quality of the modification work may be said to be quite satisfactory. The present report in which works to the completion are described may be valuable as a record of reactor modification which is a new experience at JAERI. (auth.)

  10. Similarity Arguments in the Genetic Modification Debate

    DEFF Research Database (Denmark)

    Christiansen, Andreas

    2017-01-01

    In the ethical debate on genetic modification (GM), it is common to encounter the claim that some anti-GM argument would also apply an established, ethically accepted technology, and that the anti-GM argument is therefore unsuccessful. The paper discusses whether this argumentative strategy, the ...

  11. Human Rights and Behavior Modification

    Science.gov (United States)

    Roos, Philip

    1974-01-01

    Criticisms of behavior modification, which charge that it violates ethical and legal principles, are discussed and reasons are presented to explain behavior modification's susceptibility to attack. (GW)

  12. El museo deslumbrante - XIII

    Directory of Open Access Journals (Sweden)

    Fernando Arbelaéz

    1965-05-01

    Full Text Available Es muy agradable tener en Atenas un amigo como Cayetano. Oigo mi propio idioma, y su música es una especie de anestesia muy suave para mis pensamientos. El mundo me parece grotesco, gesticulante y me produce miedo en algún lugar secreto de la mente. Escribo con una facilidad que me sorprende; pero ya se que esto no es más que el resultado de ese sutil mecanismo que reemplaza las pasiones para que podamos subsistir: el rojo de la lujuria va tomando los dorados colores del orgullo con el repique de la máquina. No creo que haya escrito con tanta fluidez y por tan largo tiempo. Es evidente, el ejercicio de teclear descansa los nervios y la concentración descansa el espíritu, así estemos meditando en nuestras propias miserias.

  13. Chapitre XIII. Lord Kitchener

    OpenAIRE

    Abbas Hilmi II,

    2017-01-01

    Son caractère. Famille. Carrière au Foreign-Office. Carrière administrative en Egypte. Ministre plénipotentiaire. Mariage. Mort. Action bénéfique en Egypte. Les Égyptiens ne l’ont pas apprécié à sa juste valeur. C’est tout au début de sa carrière politique que Sir Eldon Gorst est arrivé en Égypte où il avait été nommé Sous-Secrétaire d’État au Ministère des Finances. Tout le monde s’étonna qu’un homme aussi jeune ait pu être désigné pour occuper une fonction aussi importante. Sa formation de ...

  14. Xiii conferencia : quemaduras

    OpenAIRE

    Coiffman, Felipe; Castro Romero, Hernando

    2011-01-01

    Más de cien mil personas mueren al año a causa de las quemaduras, y que de ellas más del 40% son niños menores de 14 años, comprenderemos la importancia que tiene el tratamiento correcto de ellas. Para poder comprender las bases terapéuticas del tratamieneto de las quemaduras, es necesario  que aclaremos antes algunas nociones, aunque sea brevemente, sobre su clasificación y fisiopatología.

  15. XIII Conferencia : Quemaduras

    Directory of Open Access Journals (Sweden)

    Felipe Coiffman

    1958-05-01

    Full Text Available Más de cien mil personas mueren al año a causa de las quemaduras, y que de ellas más del 40% son niños menores de 14 años, comprenderemos la importancia que tiene el tratamiento correcto de ellas. Para poder comprender las bases terapéuticas del tratamieneto de las quemaduras, es necesario  que aclaremos antes algunas nociones, aunque sea brevemente, sobre su clasificación y fisiopatología.

  16. Fronteras exteriores e interiores en la creación de un reino medieval: Valencia en el siglo XIII

    Directory of Open Access Journals (Sweden)

    Enric GUINOT RODRÍGUEZ

    2009-12-01

    Full Text Available RESUMEN: La génesis de las fronteras de los reinos cristianos medievales en España tiene mucho que ver con los procesos de guerra y conquista frente a al-Andalus. Éste es el caso del reino de Valencia, creado por el rey Jaime I en el año 1240 a partir de varios territorios musulmanes. Sus fronteras exteriores se crearon a partir de los límites entre cristianos y musulmanes en aquel momento y también por los pactos políticos con la corona de Castilla repartiéndose el territorio de al-Andalus. Pero estas fronteras no fueron definitivas y aún durante más de un siglo los conflictos entre la corona de Aragón y la de Castilla llevaron a cambios importantes en ellas.Por otro lado, la conquista feudal de Valencia implicó su reparto en señoríos y villas reales con la consiguiente necesidad de crear fronteras interiores para delimitarlos. Muchas veces estos límites se basaron en los existentes en época islámica, si bien fue usual que la sociedad feudal los interpretase según criterios propios y locales. Además, al estar ya en pleno siglo XIII, la organización de municipios se convirtió en la unidad básica de organización territorial, si bien existió una jerarquía entre las villas y los pueblos de su término.ABSTRACT: The origin of the borders of the medieval Christian kingdoms in Spain has much to do with the processes military and conquers over al-Andalus. This is the case of the kingdom of Valencia, created by King Jaime I in 1240 from several Muslim territories. Their outer borders were created from the boundaries between Christians and Muslims at that moment, but also by the political pacts with the crown of Castile distributing the territory of al-Andalus. But these borders were not definitive and still for more than a century the conflicts between Aragon and Castile took to important changes in them.On the other hand, the feudal conquest of Valencia implied its distribution between seigneuries and royal cities with the

  17. Quid facundia posset / re patuit (Οu., Μet. XIII 382-383: the oratorical strategies of Ulysses in the Ovidian armorum iudicium

    Directory of Open Access Journals (Sweden)

    Eleonora Tola

    2010-12-01

    Full Text Available In book XIII of his Metamorphoses Ovid presents the contest for the arms of Achilles between Ajax and Ulysses. The speeches that they address to the assembly of Greek show a judicial process according to the norms of Roman rhetoric. Through his traditional facundia Ulysses persuades his public and gains victory after a confrontation that relates to a verbal fight. I will explore the construction of Ulysses’s discursive superiority focusing especially on two key-places of his speech, exordium (128-139 and peroratio (339-381. I will identify different syntactic, metrical and stylistic strategies with which Ulysses captivates his interlocutors. From a metapoetic perspective, Ovid’s tale establishes some resonances between the character’s Fama and its own textual mechanisms.

  18. Averroes en la revolución intelectual del siglo XIII: bases para una reinterpretación de la Modernidad

    OpenAIRE

    Herráiz Oliva, Pilar

    2016-01-01

    El objetivo de esta tesis es mostrar cómo, en el siglo XIII, en la facultad de artes de la Universidad de París, el averroísmo, o el aristotelismo radical, emergió como movimiento filosófico que defendía la autonomía de la razón, de la filosofía y de la ciencia. Otro de los objetivos de esta tesis es mostrar que la secularización y la especialización de las distintas ciencias, tal y como las concebimos hoy, tienen su origen en la nueva forma de hacer filosofía que surge de las exigencias meto...

  19. Las capillas y capellanías reales castellano-leonesas en la Baja Edad Media (siglos XIII-XV: algunas precisiones institucionales

    Directory of Open Access Journals (Sweden)

    Nogales Rincón, David

    2005-12-01

    Full Text Available The study of royal chapels and royal chaplaincies is focus on the analysis of the relationships between de Palace Chapel and the cathedral/monastic royal chapels from a institucional, ideologic and functional criterions, on making a systematization of them and on presenting some general notes about their characteristics, ideal patterns and development in the late Middle Ages in Castille (13th-15th centuries.

    El estudio de las capillas y capellanías reales se centra en el análisis de las relaciones entre la Capilla Palacio y las capillas reales catedralicias/monásticas desde un punto de vista institucional, ideológico y funcional, en llevar a cabo una sistematización de éstas y ofrecer algunas notas generales sobre sus características, modelos ideales y evolución en la Castilla bajomedieval (siglos XIII-XV.

  20. Quando rey perdemos nunq[u]a bien nos fallamos. La muerte del rey en la Castilla del siglo XIII

    Directory of Open Access Journals (Sweden)

    Pérez Monzón, Olga

    2007-12-01

    Full Text Available This article deals with the funeral spaces of the Castilian kings during the 13th century, and the iconography of their tombs as the reflection of a political ideational system tending toward the sanctification of the monarchy. This elevation of royalty provoked an open conflict with certain members of the nobility and the royal family, as well as a political and artistic response.

    El presente artículo trata sobre los ámbitos fúnebres de los reyes castellanos durante el siglo XIII y la particularidad iconográfica de sus monumentos tumulares como reflejo de un ideario político tendente a la sacralización de la monarquía. El encumbramiento de la realeza provocó un abierto conflicto con determinados miembros de la realeza y la familia real y una respuesta política y artística.

  1. Enabling Smart Grid Cosimulation Studies: Rapid Design and Development of the Technologies and Controls

    Energy Technology Data Exchange (ETDEWEB)

    Hansen, Timothy M.; Kadavil, Rahul; Palmintier, Bryan; Suryanarayanan, Siddharth; Maciejewski, Anthony A.; Siegel, Howard Jay; Chong, Edwin K. P.; Hale, Elaine

    2016-03-01

    The 21st century electric power grid is transforming with an unprecedented increase in demand and increase in new technologies. In the United States Energy Independence and Security Act of 2007, Title XIII sets the tenets for modernizing the electricity grid through what is known as the 'Smart Grid Initiative.' This initiative calls for increased design, deployment, and integration of distributed energy resources, smart technologies and appliances, and advanced storage devices. The deployment of these new technologies requires rethinking and re-engineering the traditional boundaries between different electric power system domains.

  2. Epigenetic modifications and diabetic nephropathy

    Directory of Open Access Journals (Sweden)

    Marpadga A. Reddy

    2012-09-01

    Full Text Available Diabetic nephropathy (DN is a major complication associated with both type 1 and type 2 diabetes, and a leading cause of end-stage renal disease. Conventional therapeutic strategies are not fully efficacious in the treatment of DN, suggesting an incomplete understanding of the gene regulation mechanisms involved in its pathogenesis. Furthermore, evidence from clinical trials has demonstrated a “metabolic memory” of prior exposure to hyperglycemia that continues to persist despite subsequent glycemic control. This remains a major challenge in the treatment of DN and other vascular complications. Epigenetic mechanisms such as DNA methylation, nucleosomal histone modifications, and noncoding RNAs control gene expression through regulation of chromatin structure and function and post-transcriptional mechanisms without altering the underlying DNA sequence. Emerging evidence indicates that multiple factors involved in the etiology of diabetes can alter epigenetic mechanisms and regulate the susceptibility to diabetes complications. Recent studies have demonstrated the involvement of histone lysine methylation in the regulation of key fibrotic and inflammatory genes related to diabetes complications including DN. Interestingly, histone lysine methylation persisted in vascular cells even after withdrawal from the diabetic milieu, demonstrating a potential role of epigenetic modifications in metabolic memory. Rapid advances in high-throughput technologies in the fields of genomics and epigenomics can lead to the identification of genome-wide alterations in key epigenetic modifications in vascular and renal cells in diabetes. Altogether, these findings can lead to the identification of potential predictive biomarkers and development of novel epigenetic therapies for diabetes and its associated complications.

  3. Ion-beam modification of properties of metals and alloys

    International Nuclear Information System (INIS)

    Khodasevich, V.V.; Uglov, V.V.; Ponaryadov, V.V.; Zhukova, S.I.

    2002-01-01

    Physical fundaments for ion-beam modification and plasma-vacuum synthesis of new types of coatings and compounds in technically important metals and alloys were development as well as corresponding installation and technologies were created. (authors)

  4. Gestión odontológica en los niveles de la educación básica regular en la UGEL 01 Papa León XIII - Chilca, 2015

    OpenAIRE

    Cornejo Serna, Manuel Elias

    2016-01-01

    El objetivo del presente trabajo de investigación es determinar nivel de percepción de la gestión odontológica en los niveles de la educación básica regular, en la UGEL 01, Papa León XIII - Chilca, 2015. El tipo de investigación es descriptiva y comparativa su diseño de la investigación fue de tipo no experimental de corte transversal. La población estuvo conformada por los padres de familia de la institución educativa de Papa León XIII de los niveles de educación básica reg...

  5. Investigation of surface halide modification of nitrile butadiene rubber

    Science.gov (United States)

    Sukhareva, K. V.; Mikhailov, I. A.; Andriasyan, Yu O.; Mastalygina, E. E.; Popov, A. A.

    2017-12-01

    The investigation is devoted to the novel technology of surface halide modification of rubber samples based on nitrile butadiene rubber (NBR). 1,1,2-trifluoro-1,2,2-trichlorethane was used as halide modifier. The developed technology is characterized by production stages reduction to one by means of treating the rubber compound with a halide modifier. The surface halide modification of compounds based on nitrile butadiene rubber (NBR) was determined to result in increase of resistance to thermal oxidation and aggressive media. The conducted research revealed the influence of modification time on chemical resistance and physical-mechanical properties of rubbers under investigation.

  6. Recent Advances in Attention Bias Modification for Substance Addictions

    Directory of Open Access Journals (Sweden)

    Melvyn Weibin Zhang

    2018-04-01

    Full Text Available Research on attentional bias modification has increased since 2014. A recent meta-analysis demonstrates evidence for bias modification for substance disorders, including alcohol and tobacco use disorders. Several pharmacological trials have shown that pharmacological agents can attenuate and modify such attentional bias. The pharmacological trials that have appeared to date have produced mixed results, which has clinical implications. Developments in Internet and mobile technologies have transformed how attention bias modification is currently being achieved. There remains great potential for further research that examines the efficacy of technology-aided attention bias interventions.

  7. Report: Ordine del sentire e apertura al mondo. Filosofia delle emozioni e processo di individuazione della persona XIII Convegno internazionale della Max-Scheler-Gesellschaft Università di Verona 27-30 Maggio 2015

    OpenAIRE

    Maria Teresa Speranza

    2015-01-01

    An interesting debate on the issue of personal identity and its ethical implications has animated the days of the XIII International Congress of Max Scheler‐Gesellschaft. A large program of work has garnered numerous perspectives on the philosophy of person and the phenomenology of otherness, investigating in particular the role of emotions in the formation of person process. The main topic of conference was the Max Scheler’s phenomenology of emotions, which is an i...

  8. Sequence tagging reveals unexpected modifications in toxicoproteomics

    Science.gov (United States)

    Dasari, Surendra; Chambers, Matthew C.; Codreanu, Simona G.; Liebler, Daniel C.; Collins, Ben C.; Pennington, Stephen R.; Gallagher, William M.; Tabb, David L.

    2010-01-01

    Toxicoproteomic samples are rich in posttranslational modifications (PTMs) of proteins. Identifying these modifications via standard database searching can incur significant performance penalties. Here we describe the latest developments in TagRecon, an algorithm that leverages inferred sequence tags to identify modified peptides in toxicoproteomic data sets. TagRecon identifies known modifications more effectively than the MyriMatch database search engine. TagRecon outperformed state of the art software in recognizing unanticipated modifications from LTQ, Orbitrap, and QTOF data sets. We developed user-friendly software for detecting persistent mass shifts from samples. We follow a three-step strategy for detecting unanticipated PTMs in samples. First, we identify the proteins present in the sample with a standard database search. Next, identified proteins are interrogated for unexpected PTMs with a sequence tag-based search. Finally, additional evidence is gathered for the detected mass shifts with a refinement search. Application of this technology on toxicoproteomic data sets revealed unintended cross-reactions between proteins and sample processing reagents. Twenty five proteins in rat liver showed signs of oxidative stress when exposed to potentially toxic drugs. These results demonstrate the value of mining toxicoproteomic data sets for modifications. PMID:21214251

  9. The ethics of molecular memory modification.

    Science.gov (United States)

    Hui, Katrina; Fisher, Carl E

    2015-07-01

    Novel molecular interventions have recently shown the potential to erase, enhance and alter specific long-term memories. Unique features of this form of memory modification call for a close examination of its possible applications. While there have been discussions of the ethics of memory modification in the literature, molecular memory modification (MMM) can provide special insights. Previously raised ethical concerns regarding memory enhancement, such as safety issues, the 'duty to remember', selfhood and personal identity, require re-evaluation in light of MMM. As a technology that exploits the brain's updating processes, MMM helps correct the common misconception that memory is a static entity by demonstrating how memory is plastic and subject to revision even in the absence of external manipulation. Furthermore, while putatively safer than other speculative technologies because of its high specificity, MMM raises notable safety issues, including potential insidious effects on the agent's emotions and personal identity. Nonetheless, MMM possesses characteristics of a more permissible form of modification, not only because it is theoretically safer, but because its unique mechanism of action requires a heightened level of cooperation from the agent. Discussions of memory modification must consider the specific mechanisms of action, which can alter the weight and relevance of various ethical concerns. MMM also highlights the need for conceptual accuracy regarding the term 'enhancement'; this umbrella term will have to be differentiated as new technologies are applied to a widening array of purposes. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  10. Geometrically Consistent Mesh Modification

    KAUST Repository

    Bonito, A.

    2010-01-01

    A new paradigm of adaptivity is to execute refinement, coarsening, and smoothing of meshes on manifolds with incomplete information about their geometry and yet preserve position and curvature accuracy. We refer to this collectively as geometrically consistent (GC) mesh modification. We discuss the concept of discrete GC, show the failure of naive approaches, and propose and analyze a simple algorithm that is GC and accuracy preserving. © 2010 Society for Industrial and Applied Mathematics.

  11. Machining, joining and modifications of advanced materials

    CERN Document Server

    Altenbach, Holm

    2016-01-01

    This book presents the latest advances in mechanical and materials engineering applied to the machining, joining and modification of modern engineering materials. The contributions cover the classical fields of casting, forming and injection moulding as representative manufacturing methods, whereas additive manufacturing methods (rapid prototyping and laser sintering) are treated as more innovative and recent technologies that are paving the way for the manufacturing of shapes and features that traditional methods are unable to deliver. The book also explores water jet cutting as an innovative cutting technology that avoids the heat build-up typical of classical mechanical cutting. It introduces readers to laser cutting as an alternative technology for the separation of materials, and to classical bonding and friction stir welding approaches in the context of joining technologies. In many cases, forming and machining technologies require additional post-treatment to achieve the required level of surface quali...

  12. Behavior Modification in the Classroom

    Science.gov (United States)

    Whitman, Mryon; Whitman, Joan

    1971-01-01

    This article presents the theoretical rationale for behavior modification, principally through its comparison with traditional psychotherapies, and suggests some behavior modification techniques for the classroom management of maladaptive behavior. (Author)

  13. O moio-medida e o moio dos preços em Portugal nos séculos Xl a XIII

    Directory of Open Access Journals (Sweden)

    Seabra Lopes, Luis

    2005-06-01

    Full Text Available In this paper, the value of the modius (modio, moyo, moio in Portugal in the 11th to the 13th centuries is studied. By this time, the modius was both a measure of capacity and a unit used in the specification of prices. The author concludes that, while the modius-measure had a capacity not under the horse charge (210 to 220 litters in the legal systems used in Portugal from the end of the 11th century onwards, some smaller modii continued to be used in rural areas far away from the main urban centers. These smaller modii had a capacity around 50 to 75 litters. With respect to the modius-price, the information gathered by the author indicates a value between 25 and 55 litters of cereal. Therefore, it becomes clear that the modius-price was not equivalent to the standard modius-measure, although it could be equivalent to the smaller modii still in use in rural areas. The gathered evidence also suggests that, from the 10th to the 13th centuries, independently of inflation, the modius-price remained approximately equivalent to the currency unit known as solidus

    Neste artigo, estuda-se o valor do moio (modius, modio, moyo em Portugal nos séculos XI a XIII. Nesta época, o moio era simultaneamente uma medida de capacidade e uma unidade usada na especificação dos preços. Este estudo permite concluir que, enquanto o moio-medida tinha, nos sistemas legais em vigor em Portugal a partir de finais do século XI, uma capacidade não inferior à carga de cavalo (210 a 220 litros, alguns moios mais pequenos continuaram a ser utilizados em áreas rurais afastadas dos principais centros urbanos. Estes moios mais pequenos tinham capacidades em torno de 50 a 75 litros. Relativamente ao moi-preço, a informação reunida indica um valor entre 25 e 55 litros de cereal, Torna-se, assim, evidente, que o moio-preço não era equivalente ao moio-medida comum, podendo, no entanto, ser equivalente aos moios menores que ainda sobreviviam nas áreas rurais. A

  14. Genetic modification and genetic determinism

    Science.gov (United States)

    Resnik, David B; Vorhaus, Daniel B

    2006-01-01

    In this article we examine four objections to the genetic modification of human beings: the freedom argument, the giftedness argument, the authenticity argument, and the uniqueness argument. We then demonstrate that each of these arguments against genetic modification assumes a strong version of genetic determinism. Since these strong deterministic assumptions are false, the arguments against genetic modification, which assume and depend upon these assumptions, are therefore unsound. Serious discussion of the morality of genetic modification, and the development of sound science policy, should be driven by arguments that address the actual consequences of genetic modification for individuals and society, not by ones propped up by false or misleading biological assumptions. PMID:16800884

  15. Modification-specific proteomics: strategies for characterization of post-translational modifications using enrichment techniques

    DEFF Research Database (Denmark)

    Zhao, Yingming; Jensen, Ole N

    2009-01-01

    More than 300 different types of protein post-translational modifications (PTMs) have been described, many of which are known to have pivotal roles in cellular physiology and disease. Nevertheless, only a handful of PTMs have been extensively investigated at the proteome level. Knowledge of protein...... substrates and their PTM sites is key to dissection of PTM-mediated cellular processes. The past several years have seen a tremendous progress in developing MS-based proteomics technologies for global PTM analysis, including numerous studies of yeast and other microbes. Modification-specific enrichment...

  16. Il fenomeno abachistico a supporto dei cambiamenti socio-economici: Arezzo tra il XIII ed il XVI secolo = The role of the abacus tradition for the economic and social development of the society: evidence from Tuscany (Italy between XIII and XVI century

    Directory of Open Access Journals (Sweden)

    Maria Pia Maraghini

    2011-12-01

    Full Text Available Este artículo indaga sobre los orígenes de la contabilidad con el objetivo de analizar el comportamiento económico. En particular, se examinan los primeros lugares específica-mente dispuestos y organizados para la enseñanza del conocimiento contable así como los medios de estudio para su transmisión: las escuelas y los libros de ábaco. Ampliamente extendidos en Italia entre los siglos XIII y XVI tenían la finalidad de transmitir, por un lado, el conocimiento generalmente difundido como matemática práctica y, por otro, las técnicas para realizar operaciones aritméticas y las reglas prácticas para la resolución de problemas comerciales y financieros.El objetivo de esta investigación es profundizar en el estudio de las escuelas y de los libros de ábaco evidenciando el papel desempeñado en el origen de la contabilidad y en el desarrollo económico y social en la época medieval y los primeros siglos del Renacimiento.Con este fin, el estudio se basa en algunas evidencias sobre la evolución de los estudios y las escuelas de ábaco en Arezzo (Toscana, Italia entre los siglos XIII y XVI. Combinando evidencias similares con el análisis teórico el estudio revela la contribución de la tradición del ábaco en el mejor desarrollo de la vida pública en época medieval y renacentista. La constatación de esta contribución ha sido la base del creciente interés mostrado hacia la cultura del ábaco por las autoridades locales de la época.This paper focuses on the “origins” of the book-keeping art which aims to record economic behaviour. In particular, this research investigates the early specific “places” arranged and organized to teach the accounting knowledge and the primitive “means” of study with which it could be handed over: the abacus schools and books. They prevalently spread in Italy between XIII and XVI century with the aim of transferring the knowledge generally defined as “practical maths”, such as the

  17. Relative effects of plasma, fibrinogen concentrate, and factor XIII on ROTEM coagulation profiles in an in vitro model of massive transfusion in trauma.

    Science.gov (United States)

    Schmidt, David E; Halmin, Märit; Wikman, Agneta; Östlund, Anders; Ågren, Anna

    2017-10-01

    Massive traumatic haemorrhage is aggravated through the development of trauma-induced coagulopathy, which is managed by plasma transfusion and/or fibrinogen concentrate administration. It is yet unclear whether these treatments are equally potent in ensuring adequate haemostasis, and whether additional factor XIII (FXIII) administration provides further benefits. In this study, we compared ROTEM whole blood coagulation profiles after experimental massive transfusion with different transfusion regimens in an in vitro model of dilution- and transfusion-related coagulopathy. Healthy donor blood was mixed 1 + 1 with six different transfusion regimens. Each regimen contained RBC, platelet concentrate, and either fresh frozen plasma (FFP) or Ringer's acetate (RA). The regimens were further augmented through addition of a low- or medium-dose fibrinogen concentrate and FXIII. Transfusion with FFP alone was insufficient to maintain tissue-factor activated clot strength, coincidental with a deficiency in fibrin-based clot strength. Fibrinogen concentrate conserved, but did not improve coagulation kinetics and overall clot strength. Only combination therapy with FFP and low-dose fibrinogen concentrate improved both coagulation kinetics and fibrin-based clot strength. Administration of FXIII did not result in an improvement of clot strength. In conclusion, combination therapy with both FFP and low-dose fibrinogen concentrate improved clotting time and produced firm clots, representing a possible preferred first-line regimen to manage trauma-induced coagulopathy when RBC and platelets are also transfused. Further research is required to identify optimal first-line transfusion fluids for massive traumatic haemorrhage.

  18. A novel Sarcocystis neurona genotype XIII is associated with severe encephalitis in an unexpectedly broad range of marine mammals from the northeastern Pacific Ocean.

    Science.gov (United States)

    Barbosa, Lorraine; Johnson, Christine K; Lambourn, Dyanna M; Gibson, Amanda K; Haman, Katherine H; Huggins, Jessica L; Sweeny, Amy R; Sundar, Natarajan; Raverty, Stephen A; Grigg, Michael E

    2015-08-01

    Sarcocystis neurona is an important cause of protozoal encephalitis among marine mammals in the northeastern Pacific Ocean. To characterise the genetic type of S. neurona in this region, samples from 227 stranded marine mammals, most with clinical or pathological evidence of protozoal disease, were tested for the presence of coccidian parasites using a nested PCR assay. The frequency of S. neurona infection was 60% (136/227) among pinnipeds and cetaceans, including seven marine mammal species not previously known to be susceptible to infection by this parasite. Eight S. neurona fetal infections identified this coccidian parasite as capable of being transmitted transplacentally. Thirty-seven S. neurona-positive samples were multilocus sequence genotyped using three genetic markers: SnSAG1-5-6, SnSAG3 and SnSAG4. A novel genotype, referred to as Type XIII within the S. neurona population genetic structure, has emerged recently in the northeastern Pacific Ocean and is significantly associated with an increased severity of protozoal encephalitis and mortality among multiple stranded marine mammal species. Published by Elsevier Ltd.

  19. Homens de letras e homens de leis ao serviço da monarquia portuguesa (séculos XII-XIII

    Directory of Open Access Journals (Sweden)

    Armando Norte

    2014-06-01

    Full Text Available Ao longo da primeira dinastia, os letrados ao serviço da Coroa portuguesa desempenharam um papel decisivo e cada vez mais importante na afirmação do poder real. Homens de leis e homens de letras serviram à casa real como oficiais, representaram os reis portugueses em atos políticos e diplomáticos e exerceram um grande leque de funções na esfera da administração central - políticas, jurídicas, médicas, económicas, administrativas. A presença desses elementos ao lado dos monarcas fez-se sentir desde a fundação do reino, logo desde o reinado de D. Afonso Henriques, coincidindo o corolário deste processo de recrutamento com a chegada de D. Afonso III ao trono, numa política continuada, de forma firme, por D. Dinis. O conjunto de eruditos recenseados junto dos reis portugueses da época fundacional constitui, nessa medida, um interessante estudo de caso para compreender, em parte, em que consistia um círculo áulico, à luz dos valores do século XII e XIII.

  20. Antroponimia femminile nella Scozia del XIII secolo: la testimonianza del Ragman Roll (1296 Feminine anthroponyms in 13th-century Scotland: the Ragman Roll (1296

    Directory of Open Access Journals (Sweden)

    Valeria Di Clemente

    2012-10-01

    Full Text Available La serie di documenti nota come Ragman Roll raccoglie i giuramenti di fedeltà e l’omaggio feudale resi da aristocratici, ecclesiastici, proprietari terrieri e borghesi di Scozia a Edoardo I Plantageneto dopo la campagna di occupazione inglese della primavera-estate 1296. In questa veste, essa riporta nomi e cognomi di circa 1800 persone, rappresentando una fonte preziosa per lo studio dell’antroponimia in uso in Scozia nella seconda metà del XIII secolo. Il presente saggio esamina gli antroponimi femminili nelle forme ricorrenti nel documento, ricostruendone la vicenda storico-etimologica e culturale.

    The documents known as Ragman Roll collect the fealty oaths sworn and the homages rendered by Scottish nobility, clergy, landowners and burgesses to Edward I Plantagenet after the English invasion of Scotland in the spring and summer of 1296. These documents record personal names and surnames of ca. 1800 people, being a precious source for the study of Scottish anthroponymy in the second half of the 13th century. This paper focuses on the feminine anthroponyms occurring in the Ragman Roll, on their form and on their historical-etymological and cultural background.

  1. Radiation modification of glass fiber - reinforced plastics

    International Nuclear Information System (INIS)

    Allayarov, S.R.; Smirnov, Yu.N.; Lesnichaya, V.A.; Ol'khov, Yu.A.; Belov, G.P.; Dixon, D.A.; Kispert, L.D.

    2007-01-01

    Modification of glass fiber - reinforced plastics (GFRPs) by gamma-irradiation has been researched to receipt of polymeric composite materials. They were produced by the film - technology method and the cheapest thermoplastics (polythene, polyamide were used as polymeric matrixes for their manufacture. GFRPs were irradiated with Co 60 gamma-rays from a Gammatok-100 source in air and in vacuum. The strength properties of GFRPs and initial polymeric matrixes were investigated before and after radiolysis. Molecular - topological structure of the polymeric matrixes were tested by the method of thermomechanical spectroscopy. The strength properties of GFRPs depend on a parity of speeds of structural (physical) and chemical modification of the polymeric matrixes. These two processes proceed simultaneously. The structural modification includes physical transformation of polymers at preservation of their chemical structure. Covalent bonds between various macromolecules or between macromolecules and surface of fiberglasses are formed at the chemical modification of polymeric matrixes induced by radiation. Action of ionizing radiation on the used polymeric matrix results to its structurization (polythene) or to destruction (polyamide). Increasing of durability of GFRPs containing polythene is caused by formation of the optimum molecular topological structure of the polymeric matrix. (authors)

  2. Enzymatic Modification of Sphingomyelin

    DEFF Research Database (Denmark)

    Due to its major role in maintaining the water-retaining properties of the epidermis, ceramide is of great commercial potential in cosmetic and pharmaceuticals such as hair and skin care products. Currently, chemical synthesis of ceramide is a costly process, and developments of alternative cost......-efficient, high yield production methods are of great interest. In the present study, the potential of producing ceramide through the enzymatic hydrolysis of sphingomyelin have been studied. sphingomyelin is a ubiquitous membrane-lipid and rich in dairy products or by-products. It has been verified...... that sphingomyelin modification gives a feasible approach to the potential production of ceramide. The reaction system has been improved through system evaluation and the optimization of several important factors, and phospholipase C from Clostridium perfringens shows higher activity towards the hydrolysis reaction...

  3. Surface modifications of dental implants.

    Science.gov (United States)

    Stanford, C M

    2008-06-01

    Dental implant surface technologies have been evolving rapidly to enhance a more rapid bone formation on their surface and hold a potential to increase the predictability of expedited implant therapy. While implant outcomes have become highly predictable, there are sites and conditions that result in elevated implant loss. This paper reviews the impact of macro-retentive features which includes approaches to surface oxide modification, thread design, press-fit and sintered-bead technologies to increase predictability of outcomes. Implant designs that lead to controlled lateral compression of the bone can improve primary stability as long as the stress does not exceed the localized yield strength of the cortical bone. Some implant designs have reduced crestal bone loss by use of multiple cutting threads that are closely spaced, smoothed on the tip but designed to create a hoop-stress stability of the implant as it is completely seated in the osteotomy. Following the placement of the implant, there is a predictable sequence of bone turnover and replacement at the interface that allows the newly formed bone to adapt to microscopic roughness on the implant surface, and on some surfaces, a nanotopography (<10(-9) m scale) that has been shown to preferably influence the formation of bone. Newly emerging studies show that bone cells are exquisitely sensitive to these topographical features and will upregulate the expression of bone related genes for new bone formation when grown on these surfaces. We live in an exciting time of rapid changes in the modalities we can offer patients for tooth replacement therapy. Given this, it is our responsibility to be critical when claims are made, incorporate into our practice what is proven and worthwhile, and to continue to support and provide the best patient care possible.

  4. Proceedings of VII International Symposium on Nuclear and Related Techniques. XIII Workshop on Nuclear Physics. WONP-NURT 2011

    International Nuclear Information System (INIS)

    2012-06-01

    This year 2012, the VII International Workshop held Tecnolaser 2012 alongside the Third International Meeting Optics, Life and Heritage organized by the Center of Technological Applications and Nuclear Development from 10 to 13 April at the National Museum of Fine Arts. Tecnolaser has been held since 1997 and has contributed to the exchange between professionals from various countries of the world in the fields of optics and laser applications. The papers submitted to this event are presented in this CD-ROM.

  5. Environmental Science and Technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The Program on Environmental Science and Technology comprehends environmental chemistry (water, soil and atmospheric chemistry), clean technologies (desulfurization of diesel and oil, biodegradable polymers and structural modification of polymers, recycling, pyrolysis of dangerous chemicals by molten salt technology), nanotechnology (magnetic nanoparticles, dendrimers, nano biomarkers, catalyzers) and chemical characterization of nuclear fuel and nuclear fuel cycle waste (chemical and isotopic characterization)

  6. Isotope hydrology investigations in Latin America 1994. Investigations on hydrology and hydrogeology in Latin America on water resources and groundwater pollution. Results achieved during the implementation of the project RLA/8/014 - ARCAL XIII: Application of isotope techniques in hydrology; Estudios de hidrologia isotopica en America Latina 1994. Estudios hidrologicos e hidrogeologicos en America Latina sobre los recursos hidricos y la contaminacion de las aguas subterraneas. Resultados obtenidos en el marco del proyecto RLA/8/014 - ARCAL XIII: Aplicacion de tecnicas isotopicas en hidrologia

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-10-01

    This IAEA Technical Document contains 17 articles about the results achieved during the implementation of the project RLA/8/014, ARCAL XIII, aimed at the application of isotope techniques in hydrology in the Caribbean and Latin America. Also included is the list of 19 participants in the project. Refs, figs and tabs.

  7. Intracranial Hemorrhage: A Devastating Outcome of Congenital Bleeding Disorders-Prevalence, Diagnosis, and Management, with a Special Focus on Congenital Factor XIII Deficiency.

    Science.gov (United States)

    Alavi, Seyed Ezatolla Rafiee; Jalalvand, Masumeh; Assadollahi, Vahideh; Tabibian, Shadi; Dorgalaleh, Akbar

    2018-04-01

    Intracranial hemorrhage (ICH) is a medical emergency. In congenital bleeding disorders, ICH is a devastating presentation accompanied with a high rate of morbidity and mortality. The prevalence of ICH is highly variable among congenital bleeding disorders, with the highest incidence observed in factor (F) XIII deficiency (FXIIID) (∼30%). This life-threatening presentation is less common in afibrinogenemia, FVIII, FIX, FVII, and FX deficiencies, and is rare in severe FV and FII deficiencies, type 3 von Willebrand disease and inherited platelet function disorders (IPFDs). In FXIIID, this diathesis most often occurs after trauma in children, whereas spontaneous ICH is more frequent in adults. About 15% of patients with FXIIID and ICH die; the bleeding causes 80% of deaths in this coagulopathy. Although in FXIIID, the bleed most commonly is intraparenchymal (> 90%), epidural, subdural, and subarachnoid hemorrhages also have been reported, albeit rarely. As this life-threatening bleeding causes neurological complications, early diagnosis can prevent further expansion of the hematoma and secondary damage. Neuroimaging plays a crucial role in the diagnosis of ICH, but signs and symptoms in patients with severe FXIIID should trigger replacement therapy even before establishment of the diagnosis. Although a high dose of FXIII concentrate can reduce the rate of morbidity and mortality of ICH in FXIIID, it may occasionally trigger inhibitor development, thus complicating ICH management and future prophylaxis. Nevertheless, replacement therapy is the mainstay of treatment for ICH in FXIIID. Neurosurgery is performed in patients with FXIIID and epidural hematoma and a hemorrhage diameter exceeding 2 cm or a volume of ICH is more than 30 cm 3 . Contact sports are not recommended in people with FXIIID as they can elicit ICH. However, a considerable number of safe sports and activities have been suggested to have more benefits than dangers for patients with congenital bleeding

  8. Valor y sentido del conocimiento en las órdenes mendicantes del Siglo XIII - doi: 10.4025/actascieduc.v32i2.9775

    Directory of Open Access Journals (Sweden)

    Gerald Cresta

    2010-12-01

    Full Text Available El Siglo XIII se expresa por medio de un concepto propio de la Universidad en que todo el saber debía estar orientado a la sapientia sacrae paginae, que fue expresada por la teología. Esta cuestión representaba sin duda un ideal de la Iglesia, pero asimismo un desafío especulativo para los pensadores de entonces. Con la complejidad epistemológica heredada del siglo XII y la inserción de las órdenes mendicantes en la labor académica, principalmente dominicos y franciscanos, esta fase de la historia de las ideas asistía a un antagonismo fundamental: el naturalismo de la herencia clásica -junto con el aporte del pensamiento árabe- y el humanismo cristiano se disputan la explicación del fin último del hombre. El valor y el sentido del conocimiento dependería en gran medida de la respuesta dada a esta diversidad de orientaciones. Y si bien es un hecho clave la influencia de los grandes autores antiguos, aristotelismo y neoplatonismo no son prerrogativa de una y otra orden. En los escritos de Santo Tomás está presente el neoplatonismo y es asimismo significativa la orientación empírica de la escuela franciscana en Inglaterra. Unos y otros, sin embargo, concordarían en una unidad del saber que podríamos interpretar bajo el signo de los trascendentales del ser. 

  9. Tomo XIII: ética, equidad e inclusión. Reseña de la Colección Internacional de Investigación Educativa Editorial Redipe 2018

    OpenAIRE

    Julio César Arboleda

    2018-01-01

    ÉTICA, EQUIDAD E INCLUSIÓN son los temas centrales de este tomo XIII, inherentes a procesos investigativos y reflexivos. El primer trabajo, por ejemplo, reivindica la visión ética y antropológica de la educación, que sigue constituyendo un pasivo en los procesos de reflexión y formación. Le siguen producciones en torno a la inclusión y la equidad educativa y social. Los demás capítulos constituyen aportaciones de diversas áreas del conocimiento.

  10. “Et qui or me vaurra entendre, cuer et oreilles me doit rendre”: espacios de lectura y público de los roman courtois de Chrétien de Troyes (siglos XII-XIII

    Directory of Open Access Journals (Sweden)

    Diego Carlo Améndolla Spinola

    2016-06-01

    Full Text Available Basado en los planteamientos de la lógica social del texto, este artículo presenta un estudio del público que escuchaba los romances corteses entre los siglo XII y XIII, específicamente los realizados por Chrétien de Troyes –clérigo lector de la Corte de Leonor de Aquitania y de Enrique II Plantagenet–, además de establecer y analizar las diversas salas de los castillos donde estas obras literarias eran narradas.

  11. Genetic modification and genetic determinism

    Directory of Open Access Journals (Sweden)

    Vorhaus Daniel B

    2006-06-01

    Full Text Available Abstract In this article we examine four objections to the genetic modification of human beings: the freedom argument, the giftedness argument, the authenticity argument, and the uniqueness argument. We then demonstrate that each of these arguments against genetic modification assumes a strong version of genetic determinism. Since these strong deterministic assumptions are false, the arguments against genetic modification, which assume and depend upon these assumptions, are therefore unsound. Serious discussion of the morality of genetic modification, and the development of sound science policy, should be driven by arguments that address the actual consequences of genetic modification for individuals and society, not by ones propped up by false or misleading biological assumptions.

  12. Dynamic Binary Modification Tools, Techniques and Applications

    CERN Document Server

    Hazelwood, Kim

    2011-01-01

    Dynamic binary modification tools form a software layer between a running application and the underlying operating system, providing the powerful opportunity to inspect and potentially modify every user-level guest application instruction that executes. Toolkits built upon this technology have enabled computer architects to build powerful simulators and emulators for design-space exploration, compiler writers to analyze and debug the code generated by their compilers, software developers to fully explore the features, bottlenecks, and performance of their software, and even end-users to extend

  13. Surface modification of polyester biomaterials for tissue engineering

    International Nuclear Information System (INIS)

    Jiao Yanpeng; Cui Fuzhai

    2007-01-01

    Surfaces play an important role in a biological system for most biological reactions occurring at surfaces and interfaces. The development of biomaterials for tissue engineering is to create perfect surfaces which can provoke specific cellular responses and direct new tissue regeneration. The improvement in biocompatibility of biomaterials for tissue engineering by directed surface modification is an important contribution to biomaterials development. Among many biomaterials used for tissue engineering, polyesters have been well documented for their excellent biodegradability, biocompatibility and nontoxicity. However, poor hydrophilicity and the lack of natural recognition sites on the surface of polyesters have greatly limited their further application in the tissue engineering field. Therefore, how to introduce functional groups or molecules to polyester surfaces, which ideally adjust cell/tissue biological functions, becomes more and more important. In this review, recent advances in polyester surface modification and their applications are reviewed. The development of new technologies or methods used to modify polyester surfaces for developing their biocompatibility is introduced. The results of polyester surface modifications by surface morphological modification, surface chemical group/charge modification, surface biomacromolecule modification and so on are reported in detail. Modified surface properties of polyesters directly related to in vitro/vivo biological performances are presented as well, such as protein adsorption, cell attachment and growth and tissue response. Lastly, the prospect of polyester surface modification is discussed, especially the current conception of biomimetic and molecular recognition. (topical review)

  14. An Empirical Analysis of Citizens' Acceptance Decisions of Electronic-Government Services: A Modification of the Unified Theory of Acceptance and Use of Technology (UTAUT) Model to Include Trust as a Basis for Investigation

    Science.gov (United States)

    Awuah, Lawrence J.

    2012-01-01

    Understanding citizens' adoption of electronic-government (e-government) is an important topic, as the use of e-government has become an integral part of governance. Success of such initiatives depends largely on the efficient use of e-government services. The unified theory of acceptance and use of technology (UTAUT) model has provided a…

  15. Modification of Food Systems by Ultrasound

    Directory of Open Access Journals (Sweden)

    L. M. Carrillo-Lopez

    2017-01-01

    Full Text Available This review describes the mechanism, operation, and recent potential applications of ultrasound in various food systems, as well as the physical and chemical effects of ultrasound treatments on the conservation and modification of different groups of food. Acoustic energy has been recognized as an emerging technology with great potential for applications in the food industry. The phenomenon of acoustic cavitation, which modifies the physical, chemical, and functional properties of food, can be used to improve existing processes and to develop new ones. The combination of ultrasonic energy with a sanitizing agent can improve the effect of microbial reduction in foods and, thereby, their quality. Finally, it is concluded that the use of ultrasound in food is a very promising area of research; however, more research is still needed before applying this technology in a wider range of industrial sectors.

  16. Structural dynamic modifications via models

    Indian Academy of Sciences (India)

    The study shows that as many as half of the matrix ... the dynamicist's analytical modelling skill which would appear both in the numerator as. Figure 2. ..... Brandon J A 1990 Strategies for structural dynamic modification (New York: John Wiley).

  17. Modifications to Replacement Costs System

    International Nuclear Information System (INIS)

    Godec, M.

    1989-01-01

    The purpose of this memorandum is to document the improvements and modifications made to the Replacement Costs of Crude Oil (REPCO) Supply Analysis System. While some of this work was performed under our previous support contract to DOE/ASFE, we are presenting all modifications and improvements are presented here for completeness. The memo primarily documents revisions made to the Lower-48 Onshore Model. Revisions and modifications made to other components and models in the REPCO system which are documented elsewhere are only highlighted in this memo. Generally, the modifications made to the Lower-48 Onshore Model reflect changes that have occurred in domestic drilling, oil field costs, and reserves since 1982, the date of the most recent available data used for the original Replacement Costs report, published in 1985

  18. Laser modification of macroscopic properties of metal surface layer

    Science.gov (United States)

    Kostrubiec, Franciszek

    1995-03-01

    Surface laser treatment of metals comprises a number of diversified technological operations out of which the following can be considered the most common: oxidation and rendering surfaces amorphous, surface hardening of steel, modification of selected physical properties of metal surface layers. In the paper basic results of laser treatment of a group of metals used as base materials for electric contacts have been presented. The aim of the study was to test the usability of laser treatment from the viewpoint of requirements imposed on materials for electric contacts. The results presented in the paper refer to two different surface treatment technologies: (1) modification of infusible metal surface layer: tungsten and molybdenum through laser fusing of their surface layer and its crystallization, and (2) modification of surface layer properties of other metals through laser doping of their surface layer with foreign elements. In the paper a number of results of experimental investigations obtained by the team under the author's supervision are presented.

  19. Standard approach to plant modifications

    International Nuclear Information System (INIS)

    Mecredy, R.C.

    1988-01-01

    Organizational and management approaches to the design, installation, and turnover of nuclear plant modifications have changed dramatically in the last 10 to 15 yr. In response to these changes, organizational and individual responsibilities have been defined and management systems have been established at Rochester Gas and Electric (RG and E) Corporation to ensure that high-quality plant modifications are installed in a timely manner that satisfies user needs at minimal cost

  20. Technologies for Hemostasis and Stabilization of the Acute Traumatic Wound

    Science.gov (United States)

    2012-10-01

    purified fibrinogen from USARMY donated plasma. 6. Generation of purified recombinant activated Factor XIII (rFXIIIA2-a) made from yeast fermentation ...Figure 5. SDS-PAGE of purified recombinant activated Factor XIII, from fermentation of Pichia pastoris. Lane 1: molecular weight marker...fibrinogen (FI) and activated Factor XIII (FXIIIa) were generated in the milk of transgenic cows and in yeast , respectively; human r- thrombin (FIIa

  1. La expansión del posesivo pospuesto a la luz de documentación navarra (y aragonesa del siglo XIII

    Directory of Open Access Journals (Sweden)

    Ángeles Romero Cambrón

    2016-06-01

    Full Text Available En los primitivos documentos romances el posesivo sólo aparece antepuesto al sustantivo (“(el nuestro padre”. La posposición (“padre nuestro” se empieza a registrar en el siglo XIII en aragonés y en dialecto navarro. Considerando principalmente la documentación de esta segunda variedad, el presente trabajo tiene como objetivo determinar el modo en que el posesivo adquirió la capacidad de aparecer pospuesto. Este cambio se vio impulsado por factores de naturaleza estructural. Uno de ellos es la existencia de la construcción posesiva con de y pronombre personal (“por raçón de mí”; otro, la concurrencia del posesivo en coordinación, bien con el sintagma preposicional (“nin subdito vuestro nin de la eglesia”, bien con otro posesivo (“l’amor nuestra e vuestra”. El posesivo se pospondría adoptando la posición propia del sintagma preposicional. Asimismo, habría influido en la imposición del cambio la tendencia a aligerar la posición prenominal cuando concurrían en ella más de un adyacente. In the first Romance texts, possessives only occur in prenominal position (e.g. (el nuestro padre. The earliest records of postposition (e.g. padre nuestro date back to the 13th century in Aragonese and in Navarrese dialect. This paper reports largely on documentation involving Navarrese in order to determine in what way the postpositive placement of the possessive became normal. The influence of three grammar structures has been found to trigger possessive postposition. The first structure is a possessive construction consisting of the preposition de followed by a personal pronoun (e.g. campo de nos. The second structure includes a possessive in coordination either with a prepositional phrase (nin subdito vuestro nin de la eglesia or with another possessive (l’amor nuestra e vuestra. In this case, the possessive occurs after the noun in the natural place of a prepositional phrase. Finally, possessive postposition became a

  2. Modification of lubricants

    Energy Technology Data Exchange (ETDEWEB)

    Kajdas, C.; Dabrowski, J.; Dominiak, M.; Sulko, M.

    1982-09-30

    Use of a powder produced during polishing of leather (as a modifying agent) is suggested. The amount is greater than or equal to 0.1% separately, or in concert with other known modifying additives. The principal component of this additive, produced during leather polishing, is collagen. It substantially increases resistance of the oil to acidic activity and formation of ferments, as well as the anticorrosion and antioxidant properties. Properties of the modifying agent depend on the technology used in tanning; the best characteristics are present when Cr compounds are used during the tanning process. Example: base oil with a 52 sSt/50/sup 0/ viscosity is placed into a mixer, and with intensive agitation gradually add 5% powder derived from leather polishing, and containing, as a tanning residue, 3% Cr/sub 2/0/sub 3/. After powder is added, agitation is continued for 1 hour and then the mixture is homogenized. On a four-bearing friction machine, the produced oil shows a sticking load of 250 kg and a diamt of wear of 1.0 mm with a load of 200 kg. For the base oil, the corresponding indicators are 130 kg and 2.7 mm with a loading of 120 kg. One more example of the process is included.

  3. Modification of unsaturated polyester resins using nano-size core ...

    African Journals Online (AJOL)

    Modification of unsaturated polyester resins using nano-size core-shell particles. MO Munyati, PA Lovell. Abstract. No Abstract Available Journal of Science and Technology Special Edition 2004: 24-31. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

  4. Enzymatic modification of phospholipids forfunctional applications and human nutrition

    DEFF Research Database (Denmark)

    Guo, Zheng; Vikbjerg, Anders / Falk; Xu, Xuebing

    2005-01-01

    analogs based on the latest understanding of pivotal role of phospholipids in manifold biological processes, exploration of remarkable application potentials of phospholipids in meliorating human health, as well as development of new chemical and biotechnological approaches applied to the modification...... design. This will of course provide fundamental bases also for the development of enzymatic technology to produce structured or modified phospholipids....

  5. Text of an African regional co-operative agreement for research, development and training related to nuclear science and technology

    International Nuclear Information System (INIS)

    1994-01-01

    As of 1 September 1994, notifications of acceptance of the African Regional Co-operative Agreement for Research, Development and Training Related to Nuclear Science and Technology (see INFCIRC/377), in accordance with Article XIII thereof, had been received by the Director General from the Governments of: Tunisia, Egypt, Algeria, Nigeria, Madagascar, Libya, Morocco, Kenya, Sudan, Ghana, Tanzania, Mauritius, Cameroon, South Africa, Zaire, Ethiopia, Zambia, Niger. The Agreement entered into force on 4 April 1990, the date of receipt of the third notification of acceptance

  6. RESEÑA de : López Villalba, José Miguel. Las finanzas de un concejo castellano: Piedrahíta, siglos xv–xvii. Estudio y documentos. Volumen XIII (1521–1522. Ávila: Ediciones de la Institución Gran Duque de Alba de la Excma. Diputación Provincial de Ávila.

    Directory of Open Access Journals (Sweden)

    Pedro Luis Lorenzo Cadarso

    2015-06-01

    Full Text Available RESEÑA de : López Villalba, José Miguel. Las finanzas de un concejo castellano: Piedrahíta, siglos xv–xvii. Estudio y documentos. Volumen XIII (1521–1522. Ávila: Ediciones de la Institución Gran Duque de Alba de la Excma. Diputación Provincial de Ávila.

  7. Isotope hydrology investigations in Latin America 1994. Investigations on hydrology and hydrogeology in Latin America on water resources and groundwater pollution. Results achieved during the implementation of the project RLA/8/014 - ARCAL XIII: Application of isotope techniques in hydrology

    International Nuclear Information System (INIS)

    1995-10-01

    This IAEA Technical Document contains 17 articles about the results achieved during the implementation of the project RLA/8/014, ARCAL XIII, aimed at the application of isotope techniques in hydrology in the Caribbean and Latin America. Also included is the list of 19 participants in the project. Refs, figs and tabs

  8. Epigenetic Modifications and Diabetic Retinopathy

    Directory of Open Access Journals (Sweden)

    Renu A. Kowluru

    2013-01-01

    Full Text Available Diabetic retinopathy remains one of the most debilitating chronic complications, but despite extensive research in the field, the exact mechanism(s responsible for how retina is damaged in diabetes remains ambiguous. Many metabolic pathways have been implicated in its development, and genes associated with these pathways are altered. Diabetic environment also facilitates epigenetics modifications, which can alter the gene expression without permanent changes in DNA sequence. The role of epigenetics in diabetic retinopathy is now an emerging area, and recent work has shown that genes encoding mitochondrial superoxide dismutase (Sod2 and matrix metalloproteinase-9 (MMP-9 are epigenetically modified, activates of epigenetic modification enzymes, histone lysine demethylase 1 (LSD1, and DNA methyltransferase are increased, and the micro RNAs responsible for regulating nuclear transcriptional factor and VEGF are upregulated. With the growing evidence of epigenetic modifications in diabetic retinopathy, better understanding of these modifications has potential to identify novel targets to inhibit this devastating disease. Fortunately, the inhibitors and mimics targeted towards histone modification, DNA methylation, and miRNAs are now being tried for cancer and other chronic diseases, and better understanding of the role of epigenetics in diabetic retinopathy will open the door for their possible use in combating this blinding disease.

  9. The surface modification of polystyrene

    International Nuclear Information System (INIS)

    Tremlett, C.

    2000-03-01

    Polymers have ideal bulk properties for many applications. However, adhesion to many polymers is poor without surface pretreatment. This can result, for example, in peeling paint and printing, adhesive joint failure and bio-incompatibility. In applications such as painting, printing, adhesive bonding and biocompatibility, various cleaning or surface chemical modifications may be employed. A commodity polymer where pretreatment is sometimes needed is polystyrene. This project investigated, in detail, the effects of a novel method of modification namely mediated electrochemical oxidation (MEO), as a mode of surface modification on polystyrene and a comparison was made with other polymers. The resulting modification was investigated using a range of surface analysis techniques to obtain complementary information. These included, X-ray photoelectron spectroscopy, contact angles, static secondary ion mass spectrometry, atomic force microscopy, chemical derivatization, scanning electron microscopy, attenuated total reflection Fourier Transform infrared spectroscopy and composite lap shear joint testing. It has been shown that MEO modifies the surface of polystyrene introduced oxygen mainly as hydroxyl groups, and a small number of carbonyl groups, that are positioned only on the backbone hydrocarbon chain. This modification improved adhesion, was stable and samples could be stored in aqueous media. The resulting hydroxylation was further derivatized using an amino acid to provide a specialised surface. This was very different from the multiple oxygen functionalities introduced in the comparison studies by UV/ozone and plasma treatments. (author)

  10. A Kantian argument against comparatively advantageous genetic modification.

    Science.gov (United States)

    Jensen, David

    2011-08-01

    The genetic modification of children is becoming a more likely possibility given our rapid progress in medical technologies. I argue, from a broadly Kantian point of view, that at least one kind of such modification-modification by a parent for the sake of a child's comparative advantage-is not rationally justified. To argue this, I first characterize a necessary condition on reasons and rational justification: what is a reason for an agent to do an action in one set of circumstances must be a reason for any in those circumstances to do the action. I then show that comparatively advantageous genetic modification violates this principle since a child's "getting ahead" through genetic modification cannot be rationally justified unless other children also could receive the modification, thus rendering the advantage useless. Finally, I consider the major objection to this it seems to disallow all cases of a parent's helping a child get ahead, something that parents normally engage in with their children. I argue that typical practices of developing a comparative advantage in a child, as well as practices of societal competition in general, do not conflict because they involve circumstances that mitigate the universal character of reasons. Many ordinary cases of competitive advantage that we think of as unjust, in fact, can be explained by my argument.

  11. Drug Addiction and DNA Modifications.

    Science.gov (United States)

    Brown, Amber N; Feng, Jian

    2017-01-01

    Drug addiction is a complex disorder which can be influenced by both genetic and environmental factors. Research has shown that epigenetic modifications can translate environmental signals into changes in gene expression, suggesting that epigenetic changes may underlie the causes and possibly treatment of substance use disorders. This chapter will focus on epigenetic modifications to DNA, which include DNA methylation and several recently defined additional DNA epigenetic changes. We will discuss the functions of DNA modifications and methods for detecting them, followed by a description of the research investigating the function and consequences of drug-induced changes in DNA methylation patterns. Understanding these epigenetic changes may provide us translational tools for the diagnosis and treatment of addiction in the future.

  12. Minimal modification to tribimaximal mixing

    International Nuclear Information System (INIS)

    He Xiaogang; Zee, A.

    2011-01-01

    We explore some ways of minimally modifying the neutrino mixing matrix from tribimaximal, characterized by introducing at most one mixing angle and a CP violating phase thus extending our earlier work. One minimal modification, motivated to some extent by group theoretic considerations, is a simple case with the elements V α2 of the second column in the mixing matrix equal to 1/√(3). Modifications by keeping one of the columns or one of the rows unchanged from tribimaximal mixing all belong to the class of minimal modification. Some of the cases have interesting experimentally testable consequences. In particular, the T2K and MINOS collaborations have recently reported indications of a nonzero θ 13 . For the cases we consider, the new data sharply constrain the CP violating phase angle δ, with δ close to 0 (in some cases) and π disfavored.

  13. DNA modification by alkylating compounds

    Energy Technology Data Exchange (ETDEWEB)

    Kruglyakova, E.E.

    1985-09-01

    Results are given for research on the physico-chemical properties of alkylating compounds - nitroso alkyl ureas (NAU) which possess a broad spectrum of biological activity, such as mutagenic, carcinogenic, and anti-tumor action that is due to the alkylation and carbamoylation of DNA as well as other cellular components. Identified chemical products of NAU interaction with DNA and its components are cited. Structural conversions of a DNA macromolecule resulting from its chemical modification are examined. NAU are used to discuss possible biological consequences of DNA modification. 148 references.

  14. Corrosion principles and surface modification

    International Nuclear Information System (INIS)

    Kruger, J.

    1982-01-01

    This chapter examines the important strategies provided by the newer ideas of corrosion science and engineering that surface modification techniques must utilize to help prevent corrosion, especially the most damaging kind of aqueous corrosion, localized corrosion. Provides a brief introduction to the principles underlying the phenomenon of corrosion in order to use them to discuss surface modification strategies to combat corrosion. Discusses the electrochemistry of corrosion; the thermodynamics of corrosion; the kinetics of corrosion; thermodynamic strategies; and kinetic strategies (formation of more protective passive films; resistance to breakdown; ductility; repassivation)

  15. Applications of high power microwaves to atmospheric modification and measurement

    International Nuclear Information System (INIS)

    Benford, J.

    1993-01-01

    The current state of proposals to use high power microwaves in the atmosphere is reviewed. HPM has been proposed to aid in the conservation of stratospheric ozone by partial breakdown, facilitating chemistry to eliminate chlorine. Another proposal is over-the-horizon radar using a partial breakdown area in the ionosphere. A key to any such effort is rapid diagnosis of the state of the atmosphere before, during and after intervention. Technology requirements of these modification and measurement proposals are reviewed. The elements of an atmospheric modification program are identified and political, economic and ideological factors are discussed

  16. Radiation Effects on Polymers - XIII

    DEFF Research Database (Denmark)

    El-Awady, N. I.; Ghanem, N. A.; Bo, P.

    1979-01-01

    Using computerized programs, the water flux and salt rejection properties in reverse osmosis of cellulose acetate-g-acrylamide membranes are determined. Comparisons are made with ungrafted commercial cellulose acetate membranes, using 0.1 and 1.0 M sodium chloride, sodium sulphate and ammonium su...... sulphate solutions. The grafted cellulose acetates show improved water flux but reduced NaCl rejection. However, they show promising prospects in bigger ion separation as for Na2SO4 and (NH4)2SO4 solutions....

  17. Symposium Symmetries in Science XIII

    CERN Document Server

    Gruber, Bruno J; Yoshinaga, Naotaka; Symmetries in Science XI

    2005-01-01

    This book is a collection of reviews and essays about the recent developments in the area of Symmetries and applications of Group Theory. Contributions have been written mostly at the graduate level but some are accessible to advanced undergraduates. The book is of interest to a wide audience and covers a broad range of topics with a strong degree of thematical unity. The book is part of a Series of books on Symmetries in Science and may be compared to the published Proceedings of the Colloquia on Group Theoretical Methods in Physics. Here, however, prevails a distinguished character for presenting extended reviews on present applications to Science, not restricted to Theoretical Physics.

  18. Electron beam induced modification of grafted polyamides

    International Nuclear Information System (INIS)

    Timus, D.M.; Brasoveanu, M.M.; Bradley, D.A.; Popov, A.M.

    1998-01-01

    It is well known that irradiation, when applied on its own or in combination with other physical and chemical treatments, can manifest in radiation damage to materials. Radiation processing technology focuses upon producing favourable modification of materials through use of relatively high dose and dose rates. Current interest is in modifying the thermal and electrical properties of textured polymers in an effort to improve safety and wear comfort of clothing. No less important is the production of textiles which are safe to use, both in homes and offices. Present investigations provide additional data in support of findings which show that polyamides, a particular class of textured polymer, are amenable to radiation processing. Accelerated electron beam irradiation of sheets of polyamide fibre results in induced grafting of acrylic and methacrylic acids. The degree of grafting is critically dependent upon irradiation dose and the extent of monomers dilution. Of particular importance is the high correlation which is found between degree of grafting and a decrease in the softening rate of the modified polyamide. A systematic modification of electrical conductivity is also observed. (author)

  19. Superhydrophobic cotton by fluorosilane modification

    CSIR Research Space (South Africa)

    Erasmus, E

    2009-12-01

    Full Text Available the treatment with fluorinated or silicon compounds)1-4 and by enhancing the surface roughness with a fractal structure5-8. Cotton, a cellulose-based material, that is greatly hydrophilic, is more benefited when made hydrophobic. Modification of cotton...

  20. The Use of Chemical Modification of Polymer Waste for Obtaining Polymer Flocculants

    Institute of Scientific and Technical Information of China (English)

    W.W.Sulkowski; K.Nowak; A.Sulkowska; A.Wolin; ska; S.Malanka; W.M.Baldur; D.Pentak

    2007-01-01

    1 Results Chemical modification of polymer plastic wastes to useful products can be one of the way of effective waste plastics management (chemical recycling). Chemical modification of polymers and polymer plastic wastes can yield products with suitable physical and chemical properties. In consequence they can be used as polyelectrolytes[1]. The variety of pollutants, universality of various water and sewage treatment technologies, introduction of new water quality improved technologies have caused a gr...

  1. Report: Ordine del sentire e apertura al mondo. Filosofia delle emozioni e processo   di individuazione della persona. XIII Convegno internazionale della Max‐Scheler‐Gesellschaft Università di Verona 27‐30 Maggio 2015

    Directory of Open Access Journals (Sweden)

    Speranza, Maria Teresa

    2015-06-01

    Full Text Available An interesting debate on the issue of personal identity and its ethical implications has animated the days of the XIII International Congress of Max Scheler‐Gesellschaft. A large program of work has garnered numerous perspectives on the philosophy of person and the phenomenology of otherness, investigating in particular the role of emotions in the formation of person process. The main topic of conference was the Max Scheler’s phenomenology of emotions, which is an important turning point in the philosophy of twentieth century. The formation of ordo amoris, or rather order of feeling, generates the self‐ transcendence of the immediate feeling in virtue, in which the person realizes her singularity. The emotion, therefore, doesn’t remain confined in a state of mind and inner private but acts in the world, creating the emotional breakthrough (emotioneller Durchbruch that makes me exist in a new way in the world, which allows me to act according to my ordo amoris.

  2. The International Scientific-Practical Conference XIII Faizkhanov Readings “The Heritage of the Golden Horde in the Nationhood and Cultural Traditions of the Peoples of Eurasia” (St. Petersburg, May 4–6, 2016

    Directory of Open Access Journals (Sweden)

    R.Yu. Pochekaev

    2017-03-01

    Full Text Available XIII Faizkhanov Readings have been held in St. Petersburg on May 4–6, 2016. This year the conference was devoted to the Golden Horde and its heritage in Eurasia on occasion of the 750 years from foundation of this state. The conference was organized by the Spiritual Administration of Moslems of the Russian Federation, State Hermitage, Moscow State University, St. Petersburg State University, Institute of Oriental Studies, Institute of Oriental Manuscripts and others. There were two plenary sessions and four sections with about 100 speakers from different regions of Russia as well as from Finland, France, Kazakhstan, Ukraine, Uzbekistan. Most part of presentations caused questions and debates. The proceeding of the conference is to be published this year.

  3. Surface modification of metals by ion implantation

    International Nuclear Information System (INIS)

    Iwaki, Masaya

    1988-01-01

    Ion implantation in metals has attracted the attention as a useful technology for the formation of new metastable alloys and compounds in metal surface layers without thermal equilibrium. Current studies of metal surface modification by ion implantation with high fluences have expanded from basic research areas and to industrial applications for the improvement of life time of tools. Many results suggest that the high fluence implantation produces the new surface layers with un-expected microscopic characteristics and macroscopic properties due to implant particles, radiation damage, sputtering, and knock-on doping. In this report, the composition, structure and chemical bonding state in surface layers of iron, iron-based alloy and aluminum sheets implanted with high fluences have been investigated by means of secondary ion mass spectroscopy (SIMS), Auger electron spectroscopy (AES), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM). Tribological properties such as hardness, friction and wear are introduced. (author)

  4. Genetic modification of cells for transplantation.

    Science.gov (United States)

    Lai, Yi; Drobinskaya, Irina; Kolossov, Eugen; Chen, Chunguang; Linn, Thomas

    2008-01-14

    Progress in gene therapy has produced promising results that translate experimental research into clinical treatment. Gene modification has been extensively employed in cell transplantation. The main barrier is an effective gene delivery system. Several viral vectors were utilized in end-stage differentiated cells. Recently, successful applications were described with adenovirus-associated vectors. As an alternative, embryonic stem cell- and stem cell-like systems were established for generation of tissue-specified gene-modified cells. Owing to the feasibility for genetic manipulations and the self-renewing potency of these cells they can be used in a way enabling large-scale in vitro production. This approach offers the establishment of in vitro cell culture systems that will deliver sufficient amounts of highly purified, immunoautologous cells suitable for application in regenerative medicine. In this review, the current technology of gene delivery systems to cells is recapitulated and the latest developments for cell transplantation are discussed.

  5. Ciudades y poder político en al-Andalus. Una hipótesis sobre el origen de las revueltas urbanas en Murcia en el siglo XIII

    Directory of Open Access Journals (Sweden)

    Frey Sánchez, Antonio Vicente

    2014-12-01

    Full Text Available Throughout the 13th century a succession of urban revolts took place in al-Andalus, which caused the withdrawal of the Almohad Empire and the establishment of the third taifas, initially led by Muhammad b. Yūsuf b. Hūd al-Mutawakkil. The inability of this emir to hold together this newly-built state, and the continuous insurrections inside and utside of Murcia have led historians to investigate the nature of political power during this period. This article examines each one of these proposals and, on the basis of an analysis of some socio-economic aspects relating to Murcia (being a representative city of al-Andalus and capital of the hūdí movement during the first half of the thirteenth century, proposes a hypothesis on the nature of its power.Durante el siglo XIII se produjo una serie de revueltas urbanas en al-Andalus que ocasionó la retirada del Imperio almohade y la formación de las terceras taifas, inicialmente encabezadas por Muḥammad b. Yūsuf b. Hūd al-Mutawakkil. La incapacidad de este emir para mantener unido el estado que había creado y las continuas insurrecciones fuera y dentro de Murcia ha llevado a historiadores y filólogos a indagar sobre la naturaleza del poder político en este periodo. Este artículo estudia cada una de estas interpretaciones y, a partir del análisis de algunos aspectos socio-económicos de Murcia, ciudad representativa en al-Andalus y capital del movimiento hūdí durante la primera mitad del siglo XIII, presenta una propuesta sobre la naturaleza de su poder.

  6. Chemical Strategies for the Covalent Modification of Filamentous Phage

    Directory of Open Access Journals (Sweden)

    Matthew B Francis

    2014-12-01

    Full Text Available Historically filamentous bacteriophage have been known to be the workhorse of phage display due to their ability to link genotype to phenotype. More recently, the filamentous phage scaffold has proved to be powerful outside the realms of phage display technology in fields such as molecular imaging, cancer research and materials and vaccine development. The ability of the virion to serve as a platform for a variety of applications heavily relies on the functionalization of the phage coat proteins with a wide variety of functionalities. Genetic modification of the coat proteins has been the most widely used strategy for functionalizing the virion; however complementary chemical modification strategies can help to diversify the range of materials that can be developed. This review emphasizes the recent advances that have been made in the chemical modification of filamentous phage as well as some of the challenges that are involved functionalizing the virion.

  7. Plant gene technology: social considerations

    African Journals Online (AJOL)

    Administrator

    The genetic modification of plants by gene technology is of immense potential benefits, but there may be possible risks. ... As a new endeavour, however, people have a mixed ... reality by gene biotechnology (Watson, 1997). Industrial ...

  8. Epigenetics and assisted reproductive technologies

    DEFF Research Database (Denmark)

    Pinborg, Anja; Loft, Anne; Romundstad, Liv Bente

    2016-01-01

    Epigenetic modification controls gene activity without changes in the DNA sequence. The genome undergoes several phases of epigenetic programming during gametogenesis and early embryo development coinciding with assisted reproductive technologies (ART) treatments. Imprinting disorders have been...

  9. Surface Modifications in Adhesion and Wetting

    Science.gov (United States)

    Longley, Jonathan

    Advances in surface modification are changing the world. Changing surface properties of bulk materials with nanometer scale coatings enables inventions ranging from the familiar non-stick frying pan to advanced composite aircraft. Nanometer or monolayer coatings used to modify a surface affect the macro-scale properties of a system; for example, composite adhesive joints between the fuselage and internal frame of Boeing's 787 Dreamliner play a vital role in the structural stability of the aircraft. This dissertation focuses on a collection of surface modification techniques that are used in the areas of adhesion and wetting. Adhesive joints are rapidly replacing the familiar bolt and rivet assemblies used by the aerospace and automotive industries. This transition is fueled by the incorporation of composite materials into aircraft and high performance road vehicles. Adhesive joints have several advantages over the traditional rivet, including, significant weight reduction and efficient stress transfer between bonded materials. As fuel costs continue to rise, the weight reduction is accelerating this transition. Traditional surface pretreatments designed to improve the adhesion of polymeric materials to metallic surfaces are extremely toxic. Replacement adhesive technologies must be compatible with the environment without sacrificing adhesive performance. Silane-coupling agents have emerged as ideal surface modifications for improving composite joint strength. As these coatings are generally applied as very thin layers (coatings using the buckling instability formed between two materials of a large elastic mismatch. The elastic modulus is found to effectively predict the joint strength of an epoxy/aluminum joint that has been reinforced with silane coupling agents. This buckling technique is extended to investigate the effects of chemical composition on the elastic modulus. Finally, the effect of macro-scale roughness on silane-reinforced joints is investigated

  10. Experience with digital instrumentation and control systems for CANDU power plant modifications

    International Nuclear Information System (INIS)

    Basu, S.

    1997-01-01

    Over the last years, Ontario Hydro CANDU power plants have gone through many modifications. This includes modification from analog hardwired controls to digital and solid state controls and replacement of the existing digital controls with the latest hardware and software technology. Examples of digital modifications at Bruce A and other CANDU power plants are briefly described and categorized. Most of the I and C technology development has been supported by the CANDU Owners Group (COG) a consortium of Canadian nuclear utilities and the Atomic Energy Canada Limited (AECL). (author)

  11. Experience with digital instrumentation and control systems for CANDU power plant modifications

    Energy Technology Data Exchange (ETDEWEB)

    Basu, S [Ontario Hydro, Toronto, ON (Canada)

    1997-07-01

    Over the last years, Ontario Hydro CANDU power plants have gone through many modifications. This includes modification from analog hardwired controls to digital and solid state controls and replacement of the existing digital controls with the latest hardware and software technology. Examples of digital modifications at Bruce A and other CANDU power plants are briefly described and categorized. Most of the I and C technology development has been supported by the CANDU Owners Group (COG) a consortium of Canadian nuclear utilities and the Atomic Energy Canada Limited (AECL). (author).

  12. Epigenetic modifications in prostate cancer.

    Science.gov (United States)

    Ngollo, Marjolaine; Dagdemir, Aslihan; Karsli-Ceppioglu, Seher; Judes, Gaelle; Pajon, Amaury; Penault-Llorca, Frederique; Boiteux, Jean-Paul; Bignon, Yves-Jean; Guy, Laurent; Bernard-Gallon, Dominique J

    2014-01-01

    Prostate cancer is the most common cancer in men and the second leading cause of cancer deaths in men in France. Apart from the genetic alterations in prostate cancer, epigenetics modifications are involved in the development and progression of this disease. Epigenetic events are the main cause in gene regulation and the three most epigenetic mechanisms studied include DNA methylation, histone modifications and microRNA expression. In this review, we summarized epigenetic mechanisms in prostate cancer. Epigenetic drugs that inhibit DNA methylation, histone methylation and histone acetylation might be able to reactivate silenced gene expression in prostate cancer. However, further understanding of interactions of these enzymes and their effects on transcription regulation in prostate cancer is needed and has become a priority in biomedical research. In this study, we summed up epigenetic changes with emphasis on pharmacologic epigenetic target agents.

  13. Exploring oxidative modifications of tyrosine

    DEFF Research Database (Denmark)

    Houée-Lévin, C; Bobrowski, K; Horakova, L

    2015-01-01

    residues are oxidised in vivo with impact on cellular homeostasis and redox signalling pathways. A notable example is tyrosine, which can undergo a number of oxidative post-translational modifications to form 3-hydroxy-tyrosine, tyrosine crosslinks, 3-nitrotyrosine and halogenated tyrosine, with different...... effects on cellular functions. Tyrosine oxidation has been studied extensively in vitro, and this has generated detailed information about the molecular mechanisms that may occur in vivo. An important aspect of studying tyrosine oxidation both in vitro and in biological systems is the ability to monitor...... residues modified and the nature of the modification. These approaches have helped understanding of the consequences of tyrosine oxidation in biological systems, especially its effects on cell signalling and cell dysfunction, linking to roles in disease. There is mounting evidence that tyrosine oxidation...

  14. Cradle modification for hydraulic ram

    International Nuclear Information System (INIS)

    Koons, B.M.

    1995-01-01

    The analysis of the cradle hydraulic system considers stress, weld strength, and hydraulic forces required to lift and support the cradle/pump assembly. The stress and weld strength of the cradle modifications is evaluated to ensure that they meet the requirements of the American Institute for Steel Construction (AISC 1989). The hydraulic forces are evaluated to ensure that the hydraulic system is capable of rotating the cradle and pump assembly to the vertical position (between 70 degrees and 90 degrees)

  15. Histone modifications: Cycling with chromosomal replication

    DEFF Research Database (Denmark)

    Thon, Genevieve

    2008-01-01

    Histone modifications tend to be lost during chromosome duplication. Several recent studies suggest that the RNA interference pathway becomes active during the weakened transcriptional repression occurring at centromeres in S phase, resulting in the re-establishment of histone modifications...

  16. BIOCHAR MODIFICATION, THERMAL STABILITY AND TOXICITY OF PRODUCTS MODIFICATION

    Directory of Open Access Journals (Sweden)

    Romana FRIEDRICHOVÁ

    2017-12-01

    Full Text Available Biochar is a product obtained from processing of waste biomass. The main application of biochar is in soil and environment remediation. Some new applications of this carbonaceous material take advantage of its adsorption capacity use it as a heterogeneous catalyst for energy storage and conversion etc. This contribution describes thermal stability of the original biochar. It discusses biochar modified by chemical and physical methods including a new compound of biochar-graphene oxide. The purpose of the modifications is to increase its active surface to introduce active functional groups into the carbon structure of biochar in relation to fire safety and toxicity of those products.

  17. Caracterización arqueométrica de pigmentos y soportes procedentes de pinturas murales góticas (S. XIII-XV

    Directory of Open Access Journals (Sweden)

    Kriznar, A.

    2007-04-01

    mortar as support were used in these Gothic wall paintings. Moreover, this feature, besides of cinnabar application, allows to establish the 1400-1410 wall paintings in the artistic Italian current named Trecento. The second procedure to paint is a typical of North Europe: one or two layer of mortar with a fine layer of lime. This is used to improve the strenght of lime as an aglutinant in the mortar. With this study, it is concluded that the Italian and North-European artistic currents met in Slovenian territory, which is appraisable as much stilistic (Art History as scientific (Chemical and Physical analysis point of views. This kind of investigation allows to know better the Central European Art and the Slovenian Art in the Adriatic zone, as well as the general map of European Art in the Middle Age.

    El presente trabajo forma parte de una investigación más amplia sobre pinturas murales góticas (S. XIII-XV. En concreto, se han estudiado las que se encuentran en el interior de varias iglesias de Eslovenia y que no habían sido estudiadas, hasta la fecha, por medio de técnicas instrumentales de análisis de materiales. Una de ellas está situada en la ciudad de Crngrob (Eslovenia y se ha seleccionado como objeto de este estudio (Iglesia de la Anunciación de María. El estudio científico de las muestras en el ICMSE se basó, principalmente, en la preparación de una serie de secciones estratigráficas a partir de los fragmentos pequeños de las mismas para analizar las diferentes capas de mortero soporte y de la propia pintura. Se examinaron dichas preparaciones por varias técnicas, como son fotografía digital, microscopías óptica y electrónica (MEB, espectroscopía IR (reflexión y EDX. Una información adicional sobre pigmentos y morteros se obtuvo mediante IR (transmisión, preparando pastillas con KBr, además de DRX. Las muestras estudiadas pueden clasificarse en dos grupos que, a su vez, permiten apreciar dos formas de pintura mural. La primera es t

  18. Caprine Butchery and Bone Modification Templates: A step towards standardisation

    Directory of Open Access Journals (Sweden)

    Peter Popkin

    2005-03-01

    Full Text Available Widely accepted zooarchaeological procedure for recording butchery marks and other types of bone modification involves two processes: Drawing the bone showing the exact location and orientation of the modification and recording all of the information about the bone and its modification into an electronic database. No recording templates have ever been published, however, resulting in individual zooarchaeologists repeating the effort of developing their own templates or drawings for each bone in an assemblage showing a modification. Both of these tasks are time consuming and lead to inconsistencies in recording and quantification methods. To help alleviate this problem a series of caprine (sheep and goat bone templates have been created. These templates show every bone in a goat skeleton, apart from the skull, from six views at life-size when printed on A4 paper. They have intentionally been produced with a minimum of detail (without shading or stippling etc. so that the recorded butchery marks and bone modifications will be clearly visible. Because the skeletal morphology of sheep and goats is so similar these templates may be used interchangeably for either species. They may also be used for many other artiodactyl species such as cattle and deer as no scale has been indicated. The study of butchery marks and bone modification has the potential to provide zooarchaeologists with information about taphonomy, site formation processes, burial/ritual practices, human behaviour, ancient technologies and possibly ethnicity amongst other things, but only if the recording of these bone modifications is undertaken in a standardised fashion across the field. While much effort has been directed towards standardising the recognition and classification of various bone modifications, the recording of these modifications regularly occurs in various ways. Using standardised recording templates will save valuable time and help to alleviate problems of data

  19. Modification Propagation in Complex Networks

    Science.gov (United States)

    Mouronte, Mary Luz; Vargas, María Luisa; Moyano, Luis Gregorio; Algarra, Francisco Javier García; Del Pozo, Luis Salvador

    To keep up with rapidly changing conditions, business systems and their associated networks are growing increasingly intricate as never before. By doing this, network management and operation costs not only rise, but are difficult even to measure. This fact must be regarded as a major constraint to system optimization initiatives, as well as a setback to derived economic benefits. In this work we introduce a simple model in order to estimate the relative cost associated to modification propagation in complex architectures. Our model can be used to anticipate costs caused by network evolution, as well as for planning and evaluating future architecture development while providing benefit optimization.

  20. The Need for Knowledge Modification in Technology Change:

    DEFF Research Database (Denmark)

    Madsen, Erik Skov; Mikkelsen, Lars Lindegaard

    2018-01-01

    in the relocation of manufacturing facilities. Two studies investigate operation and automation of oil and gas production in the North Sea. The case study method involves semi-structured interviews, surveys, an analysis of historical production data and observations. Based on the findings from the field studies...

  1. Modification of biomolecules and combined actions by radiation

    International Nuclear Information System (INIS)

    Kim, Jin Kyu; Lee, J. W.; Kim, J. H.; Choi, J. I.; Song, B. S.; Kim, J. K.; Park, J. H.; Lee, Y. J.; Ryu, S. H.; Sung, N. Y.; Cha, M. K.; Nam, J. Y.; Park, J. Y.; Cho, E. R.; Ryu, T. H.

    2011-12-01

    Advanced Radiation Technology Institute is a government-supported institute for radiation research and application. It has focused on development of fundamentals for radiation applications based on the existing radiation technology, and on enhancement of biological effectiveness of radiation through theoretical approach to the combined actions of radiation with another factor. Application of radiation technology together with the existing technologies to enhance the physical, chemical, biological characteristics through modification of biomolecules resulted in creation of de novo materials of scientific and industrial values. A theoretical model for combined action of radiation with another physico-chemical factor has been established. Conclusively the results of this study can provide scientific bases for maximizing the efficacy of ionizing radiation in relation to industrial applications

  2. Laser surface modification of PEEK

    Energy Technology Data Exchange (ETDEWEB)

    Riveiro, A., E-mail: ariveiro@uvigo.es [Applied Physics Department, University of Vigo ETSII, Lagoas-Marcosende, 9, Vigo 36310 (Spain); Centro Universitario de la Defensa, Escuela Naval Militar, Plaza de Espana 2, 36920 Marin (Spain); Soto, R.; Comesana, R.; Boutinguiza, M.; Val, J. del; Quintero, F.; Lusquinos, F.; Pou, J. [Applied Physics Department, University of Vigo ETSII, Lagoas-Marcosende, 9, Vigo 36310 (Spain)

    2012-09-15

    Highlights: Black-Right-Pointing-Pointer Role of laser irradiation wavelength on the surface modification of PEEK (polyether-ether-ketone) was investigated. Black-Right-Pointing-Pointer Adequate processing conditions to improve wettability, roughness, and cell adhesion characteristics are determined. Black-Right-Pointing-Pointer A design of experiments (DOE) methodology was performed. Black-Right-Pointing-Pointer UV (355 nm) radiation is the most promising laser radiation for improving the adhesive surface properties of PEEK. - Abstract: Polyether-ether-ketone (PEEK) is a synthetic thermoplastic polymer with excellent mechanical and chemical properties, which make it attractive for the field of reconstructive surgery. Nevertheless, this material has a poor interfacial biocompatibility due to its large chemical stability which induces poor adhesive bonding properties. The possibilities of enhancing the PEEK adhesive properties by laser treatments have been explored in the past. This paper presents a systematic approach to discern the role of laser irradiation wavelength on the surface modification of PEEK under three laser wavelengths ({lambda} = 1064, 532, and 355 nm) with the aim to determine the most adequate processing conditions to increase the roughness and wettability, the main parameters affecting cell adhesion characteristics of implants. Overall results show that the ultraviolet ({lambda} = 355 nm) laser radiation is the most suitable one to enhance surface wettability of PEEK.

  3. Procès inquisitorial contra el castellà d'Amposta Fra Pedro Roiç de Moros a la cúria pontificia del papa Benet XIII (I414-1418

    Directory of Open Access Journals (Sweden)

    Alanyà i Roig, Josep

    2002-06-01

    Full Text Available The Arxiu de la Corona d'Aragó in Barcelona houses the original commital proceedings instituted by a court of cardinals set up by pope Benedict XIII in the year 1414 and teh trial itself of the lord of Amposta, Fra Pedro Roiç de Moros, knight of the Order of St. John of Jerusalem, who had been charged with indictable offences—concubinage, robbery, housing apostates, oath breaking and counterfeiting money, mismanagement of the Castlery's assets, excesses against his vassals, wasteful use of assets, dereliction and property abandonment— of which he was found guilty, and thereafter sentenced to losing the dignity of his lordship. Roiç de Moros appealed to the Council of Constance as well as to pope Martin V. It would be to no avail. Roiç de Moros paid a very high price for choosing to support count Jaume d'Urgell and deciding to oppose Ferran dAntequera and the policies of pope Benedict XIII. The follow up and analysis of the court´s records are very interesting for their human variety and interesting informations about fortresses, houses, barns, treaures and services there were in different locations of the Castlery of Amposta, such as Batea, Gandesa, Miravet, Ulldecona, Ascó and other towns and villages along the Ribera d´Ebre. The whole criminal prosecution bears a very peculiar historic interest mainly because the protagonists, the court procedures, and their causes are the link between the Interregnum in the Aragonese Crown and the fìnal days of the Western Schism.

    A l'Arxiu de la Corona d'Aragó de Barcelona es conserva el procés original instruït per un tribunal de cardenals creat pel papa Benet XIII l'any 1414 per jutjar el Castella d'Amposta, l'hospitaler Fra Pedro Roiç de Moros, acusat de crims greus —concubinat, bandositats, recepció d’apòstates, perjuri i fabricació de moneda falsa, mala administració dels bens de la Castellania, comissió d'excessos contra els seus vassalls, dilapidado de bens i abando

  4. Successful design and application of SNCR parallel to combustion modification

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Dongxian; Tang, Leping; Shao, Xiaozhen; Meng, Derun; Li, Hongjian [Tongfang Environment CO., LTD., Beijing (China); Zhou, Wei; Xu, Guang [GE Energy, Anaheim, CA (United States)

    2013-07-01

    Various De-NOx methods have been recently adopted in China to control NOx emissions including Selective Non-Catalytic Reaction (SNCR) technology. Usually, the design of SNCR system is carried out after the combustion modification technologies, such as low NOx burner (LNB) and over fire air (OFA), have already been installed and in operation. This article discusses how to design the SNCR system parallel to the combustion modification. The SNCR process design consists of three steps: (1) boiler baseline test, (2) computational fluid dynamics simulation (CFD) facilitated design and (3) SNCR system performance predictions and optimizations. The first step is to conduct boiler baseline test to characterize the boiler operating conditions at a load range. The test data can also be used to calibrate the CFD model. The second step is to develop a three-dimensional boiler coal combustion CFD model to simulate the operation of the boilers at both baseline and post combustion modification conditions. The simulation reveals velocity, temperature and combustible distributions in the furnace. The last step is to determine the position and numbers of the injectors for SNCR reagent. The final field tests upon the project completion have shown that the average SNCR De-NOx efficiency has reached 35.1% with the maximum removal efficiency of 45% on full load. The project also couples the SNCR and SCR (Selective Catalytic Reduction) technologies. The combined removal efficiency of combustion modifications, SNCR and SCR is higher than 82%. This paper shows a successful example for retrofitting aged power-generating units with limited space.

  5. Photon technology. Laser process technology; Photon technology. Laser process gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For developing laser process technology by interaction between substance and photon, the present state, system, R and D issues and proposal of such technology were summarized. Development of the photon technology aims at the modification of bonding conditions of substances by quantum energy of photon, and the new process technology for generating ultra- high temperature and pressure fields by concentrating photon on a minute region. Photon technology contributes to not only the conventional mechanical and thermal forming and removal machining but also function added machining (photon machining) in quantum level and new machining technology ranging from macro- to micro-machining, creating a new industrial field. This technology extends various fields from the basis of physics and chemistry to new bonding technology. Development of a compact high-quality high-power high-efficiency photon source, and advanced photon transmission technology are necessary. The basic explication of an unsolved physicochemical phenomenon related to photon and substance, and development of related application technologies are essential. 328 refs., 147 figs., 13 tabs.

  6. Activated Carbon Preparation and Modification for Adsorption

    Science.gov (United States)

    Cao, Yuhe

    Butanol is considered a promising, infrastructure-compatible biofuel. Butanol has a higher energy content than ethanol and can be used in conventional gas engines without modifications. Unfortunately, the fermentation pathway for butanol production is restricted by its toxicity to the microbial strains used in the process. Butanol is toxic to the microbes, and this can slow fermentation rates and reduce butanol yields. Gas stripping technology can efficiently remove butanol from the fermentation broth as it is produced, thereby decreasing its inhibitory effects. Traditional butanol separation heavily depends on the energy intensive distillation method. One of the main issues in acetone-butanol-ethanol fermentation is that butanol concentrations in the fermentation broth are low, ranging from 1 to 1.2 percent in weight, because of its toxicity to the microorganisms. Therefore distillation of butanol is even worse than distillation of corn ethanol. Even new separation methods, such as solid- extraction methods involve adding substances, such as polymer resin and zeolite or activated carbon, to biobutanol fermentatioon broth did not achieve energy efficient separation of butanol due to low adsorption selectivity and fouling in broth. Gas-stripping - condensation is another new butanol recovery method, however, the butanol in gas-stripping stream is too low to be condensed without using expensive and energy intensive liquid nitrogen. Adsorption can then be used to recover butanol from the vapor phase. Activated carbon (AC) samples and zeolite were investigated for their butanol vapor adsorption capacities. Commercial activated carbon was modified via hydrothermal H2O2 treatment, and the specific surface area and oxygen-containing functional groups of activated carbon were tested before and after treatment. Hydrothermal H2O 2 modification increased the surface oxygen content, Brunauer-Emmett-Teller surface area, micropore volume, and total pore volume of active carbon

  7. Surface Modification for Microreactor Fabrication

    Directory of Open Access Journals (Sweden)

    Wladyslaw Torbicz

    2006-04-01

    Full Text Available In this paper, methods of surface modification of different supports, i.e. glass andpolymeric beads for enzyme immobilisation are described. The developed method ofenzyme immobilisation is based on Schiff’s base formation between the amino groups onthe enzyme surface and the aldehyde groups on the chemically modified surface of thesupports. The surface of silicon modified by APTS and GOPS with immobilised enzymewas characterised by atomic force microscopy (AFM, time-of-flight secondary ion massspectroscopy (ToF-SIMS and infrared spectroscopy (FTIR. The supports withimmobilised enzyme (urease were also tested in combination with microreactors fabricatedin silicon and Perspex, operating in a flow-through system. For microreactors filled withurease immobilised on glass beads (Sigma and on polymeric beads (PAN, a very high andstable signal (pH change was obtained. The developed method of urease immobilisationcan be stated to be very effective.

  8. Ion beam modification of polymers

    International Nuclear Information System (INIS)

    Sofield, C.J.; Sugden, S.; Ing, J.; Bridwell, L.B.; Wang, Y.Q.

    1993-01-01

    The implantation of polymers has received considerable attention in recent years, primarily to examine doping of conducting polymers and to increase the surface conductivity (by many orders of magnitude) of highly insulating polymers. The interest in these studies was partly motivated by possible applications to microelectronic device fabrication. More recently it has been observed that ion implantation can under some conditions lead to the formation of a hard (e.g. as hard as steel, ca. 3 MPa) and conducting surface layer. This paper will review the ion beam modification of polymers resulting from ion implantation with reference to fundamental ion-solid interactions. This leads us to examine whether or not implantation of polymers is a contradiction in terms. (Author)

  9. Soy protein modification: A review

    Directory of Open Access Journals (Sweden)

    Barać Miroljub B.

    2004-01-01

    Full Text Available Soy protein products such as flour, concentrates and isolates are used in food formulation because of their functionality, nutritional value and low cost. To obtain their optimal nutritive and functional properties as well as desirable flavor different treatments are used. Soybean proteins can be modified by physical, chemical and enzymatic treatments. Different thermal treatments are most commonly used, while the most appropriate way of modifying soy proteins from the standpoint of safety is their limited proteolysis. These treatments cause physical and chemical changes that affect their functional properties. This review discusses three principal methods used for modification of soy protein products, their effects on dominant soy protein properties and some biologically active compounds.

  10. Plasma surface modification of rigid contact lenses decreases bacterial adhesion.

    Science.gov (United States)

    Wang, Yingming; Qian, Xuefeng; Zhang, Xiaofeng; Xia, Wei; Zhong, Lei; Sun, Zhengtai; Xia, Jing

    2013-11-01

    Contact lens safety is an important topic in clinical studies. Corneal infections usually occur because of the use of bacteria-carrying contact lenses. The current study investigated the impact of plasma surface modification on bacterial adherence to rigid contact lenses made of fluorosilicone acrylate materials. Boston XO and XO2 contact lenses were modified using plasma technology (XO-P and XO2-P groups). Untreated lenses were used as controls. Plasma-treated and control lenses were incubated in solutions containing Staphylococcus aureus or Pseudomonas aeruginosa. MTT colorimetry, colony-forming unit counting method, and scanning electron microscopy were used to measure bacterial adhesion. MTT colorimetry measurements showed that the optical density (OD) values of XO-P and XO2-P were significantly lower than those of XO and XO2, respectively, after incubation with S. aureus (P lenses and to the XO2-P versus XO2 lenses incubated with S. aureus (P lenses incubated with P. aeruginosa (P lenses. Plasma surface modification can significantly decrease bacterial adhesion to fluorosilicone acrylate contact lenses. This study provides important evidence of a unique benefit of plasma technology in contact lens surface modification.

  11. TWO MODIFICATIONS OF SCALERS FOR RATE STUDIES

    Energy Technology Data Exchange (ETDEWEB)

    Hodgson, T. S.; Gordon, B. E.

    1964-04-15

    Two simple modifications to nuclear scalers have been developed. The first involves an automatic stepping switch which permits a single scaler to be actuated by up to four Geiger counters in sequence and to record the time to reach a preset count for each. The second modification is designed to pick a pulse off a conventional scaler when a preset count has been reached and to use the pulse to actuate a recorder. Both modifications considerably extend the utility of conventional scalers.

  12. Modification of metallic corrosion by ion implantation

    International Nuclear Information System (INIS)

    Clayton, C.R.

    1981-01-01

    This review will consider some of the properties of surface alloys, formed by ion implantation, which are effective in modifying corrosion behaviour. Examples will be given of the modification of the corrosion behaviour of pure metals, steels and other engineering alloys, resulting from implantation with metals and metalloids. Emphasis will be given to the modification of anodic processes produced by ion implantation since a review will be given elsewhere in the proceedings concerning the modification of cathodic processes. (orig.)

  13. Proteomic analysis of post-translational modifications

    DEFF Research Database (Denmark)

    Mann, Matthias; Jensen, Ole N

    2003-01-01

    Post-translational modifications modulate the activity of most eukaryote proteins. Analysis of these modifications presents formidable challenges but their determination generates indispensable insight into biological function. Strategies developed to characterize individual proteins are now...... systematically applied to protein populations. The combination of function- or structure-based purification of modified 'subproteomes', such as phosphorylated proteins or modified membrane proteins, with mass spectrometry is proving particularly successful. To map modification sites in molecular detail, novel...

  14. Chemical Modifications of Starch: Microwave Effect

    OpenAIRE

    Lewicka, Kamila; Siemion, Przemysław; Kurcok, Piotr

    2015-01-01

    This paper presents basic methods of starch chemical modification, the effect of microwave radiation on the modification process, and the physicochemical properties of starch. It has been shown that the modifications contribute to improvement of the material performance and likewise to significant improvement of its mechanical properties. As a result, more and more extensive use of starch is possible in various industries. In addition, methods of oxidized starch and starch esters preparation ...

  15. Chemical Modifications of Starch: Microwave Effect

    Directory of Open Access Journals (Sweden)

    Kamila Lewicka

    2015-01-01

    Full Text Available This paper presents basic methods of starch chemical modification, the effect of microwave radiation on the modification process, and the physicochemical properties of starch. It has been shown that the modifications contribute to improvement of the material performance and likewise to significant improvement of its mechanical properties. As a result, more and more extensive use of starch is possible in various industries. In addition, methods of oxidized starch and starch esters preparation are discussed. Properties of microwave radiation and its impact on starch (with particular regard to modifications described in literature are characterized.

  16. Rapid detection of genetic modification for GMO monitoring in agriculture

    Directory of Open Access Journals (Sweden)

    Petrović Sofija

    2015-01-01

    Full Text Available Transgenic technology has expanded the ways of new genetic variability creation. Genetically modified organisms (GMOs are organisms which total genome is altered in a way that could not happen in nature. GM crops recorded a steady increase in its share in agricultural production. However, for the most part, GMO in agriculture has been limited to two cultivars - soy and corn, and the two genetic modifications, the total herbicide resistance and pest of the Lepidoptera genus. In order to monitor cultivation and trade of GMOs, tests of different precision are used, qualitatively and/or quantitatively determining the presence of genetic modification. Tests for the rapid determination of the presence of GM are suitable, since they can be implemented quickly and accurately, in terms of declared sensitivity, outside or in the laboratory. The example of the use of rapid tests demonstrates their value in use for rapid and efficient monitoring.

  17. Modifications to HFEF/S for IFR fuel cycle demonstration

    International Nuclear Information System (INIS)

    Lineberry, M.J.; Phipps, R.D.; Forrester, R.J.; Carnes, M.D.; Rigg, R.H.

    1988-01-01

    Modifications have begun to the Hot Fuel Examination Facility-South (HFEF/S) in order to demonstrate the technology of the integral fast reactor (IFR) fuel cycle. This paper describes the status of the modifications to the facility and briefly reviews the status of the development of the process equipment. The HFEF/S was the demonstration facility for the early Experimental Breeder Reactor II (EBR-II) melt refining/injection-casting fuel cycle. Then called the Fuel Cycle Facility, ∼400 EBR-II fuel assemblies were recycled in the two hot cells of the facility during the 1964-69 period. Since then it has been utilized as a fuels examination facility. The objective of the IFR fuel cycle program is to upgrade HFEF/S to current standards, install new process equipment, and demonstrate the commercial feasibility of the IFR pyroprocess fuel cycle

  18. Gas-discharge plasma processes for surface modification and conversion of chemical substances. Application for fuel cells

    Energy Technology Data Exchange (ETDEWEB)

    Schroeder, K.; Meyer, D.; Rohland, B.; Heintze, M.; Zahn, R.J.; Hannemann, M.; Meusinger, J.; Ohl, A. [Institute of Non-Thermal Plasma Physics, Greifswald (Germany)]|[Gesellschaft fuer Angewandte Technik mbH Greifswald (Germany)]|[GAPC, Adam Opel AG, IPC, Ruesselsheim (Germany)

    2001-07-01

    The potential of plasma processes towards hydrogen and fuel cell technology will be demonstrated by two examples with preliminary results: 1. plasma modification of polymer electrolyte membranes for direct methanol fuel cells, and 2. plasma supported steam reforming.

  19. Los fines de la presencia de la Orden del Hospital en Castilla (Siglos XII y XIII = The objectives of the presence of the Order of the Hospital in Castile during the 12th and 13th Centuries

    Directory of Open Access Journals (Sweden)

    Carlos Barquero Goñi

    2015-06-01

    Full Text Available Las fuentes nos informan muy poco acerca de la suerte que tenían los recursos obtenidos por la Orden del Hospital de sus posesiones en la Corona de Castilla durante los siglos XII y XIII. Con toda seguridad lo primero en que debían utilizarse estas sumas era en el mantenimiento de todas las instalaciones y miembros de la Orden en Castilla y León. Lo que sobrase después de esto se habría de emplear en cuatro partidas distintas: aportaciones al convento central del Hospital en Oriente, actividad militar en la propia Corona de Castilla, desempeño de funciones asistenciales y propiamente hospitalarias, y soporte para algunas operaciones financieras.The sources provide us with scarce information on the use of resources obtained by the Order of the Hospital from its possessions in the Crown of Castile during the twelfth and thirteenth centuries. There is no doubt that this wealth was destined in the first place for the maintenance of all the facilities and members of the Order in Castile and Leon. What remained thereafter would be allocated to four different areas: Contributions to the central convent of the Hospital in the East; military activity within the Crown of Castile itself; coverage of welfare and specifically hospitaller functions; and support for certain financial operations.

  20. As parroquias do Porriño, Cans e Atios na documentación do mosteiro cisterciense de Santa María de Melón. Séculos XII e XIII

    Directory of Open Access Journals (Sweden)

    Gradín Fernández, Isis

    2011-12-01

    Full Text Available After the introduction and criteria of transcription, 31 papers are published from the twelfth and thirteenth centuries belonging to the Cistercian monastery of Santa Maria de Melon, specifically those that permit the reconstruction of old possessions, focusing on the current council of O Porriño -which was the monastery of San Miguel de Cans, absorbed by the cistercian monks of Melon. A paleographic and historical approximation of this documentation is done, which is complemented with the corresponding index of names and place names.

    [gl] Trala introducción e criterios de transcripción, edítanse 31 documentos dos séculos XII e XIII pertencentes ó mosteiro cisterciense de Santa María de Melón, concretamente aqueles que permiten reconstruír as antigas posesións –centradas sobre o actual concello de O Porriño- do que foi o mosteiro de San Miguel de Cans, absorvido polos monxes cistercienses de Melón. Faise unha aproximación paleográfica e histórica da documentación, que se complementa cos correspondentes índices onomásticos e toponímicos.

  1. La visita del papa Benet XIII a València de 1414-1415: una aproximació a la seua memòria en la tradició historiogràfica valenciana

    Directory of Open Access Journals (Sweden)

    Blai Josep Server Server

    2017-06-01

    Full Text Available L’article analitza els testimonis de la visita de Benet XIII, Pero Martínez de Luna, a la ciutat de València entre desembre de 1414 i juliol de 1415 conservats en la tradició historiogràfica valenciana. En concret, s’hi examinen les obres valencianes de caràcter memorialístic (cròniques i dietaris, principalment que, des del segle XV i fins a l’actualitat, han parat atenció a l’esdeveniment, per concloure que la memòria del mateix es conservà sobretot en els cercles del poder eclesiàstic –particularment entorn de la Seu– i municipal de la ciutat. Més enllà d’aquests àmbits, la visita papal fou progressivament oblidada, a pesar de l’impacte notable que degué tindre sobre aquells que la visqueren directament o en tingueren notícia indirectament a l’inici del segle XV.

  2. Infections associated with body modification

    Directory of Open Access Journals (Sweden)

    Samson Sai-Yin Wong

    2012-12-01

    Full Text Available Although exact statistics are lacking, body modifications for cosmetic purposes are performed in many countries. The commonest forms include tattooing, body piercing, and breast and facial augmentation using implants or injectable fillers. Liposuction and, to a lesser extent, mesotherapy are also practiced in many countries. Infective complications of these procedures include local infections, transmission of bloodborne pathogens (viral hepatitis and human immunodeficiency virus, and distant infections such as infective endocarditis. Presence of foreign bodies, long healing time of piercing wounds, and poor compliance with infection control practices of some practitioners all predispose the recipients to infections. Apart from the endogenous microbial flora of the skin and mucosae, atypical mycobacteria, especially the rapid growers, have emerged as some of the most important pathogens in such settings. Outbreaks of infection are commonly reported. We hereby review the current knowledge of the topic with specific focus on infections associated with tattooing, body piercing, breast augmentation, mesotherapy, liposuction, and tissue filler injections. Greater awareness among consumers and health-care professionals, as well as more stringent regulations by the health authorities, is essential to minimize the health risks arising from these procedures.

  3. I Thought This Was a Study on Math Games: Attribute Modification in Children’s Interactions with Mathematics Apps

    Directory of Open Access Journals (Sweden)

    Stephen I Tucker

    2017-05-01

    Full Text Available Technology is an increasingly important component of education. Children’s mathematical interactions with technology have become a focus of mathematics education research, but less research has investigated constructs that contribute to these mathematical interactions. Attributes of children and technology play a key role in mathematical interactions and both children and technology can modify attributes during these interactions. Grounded in the Artifact-Centric Activity Theory and linked to recent developments in research on technology in mathematics education, this qualitative study extended an earlier exploratory study to investigate attribute modification. In particular, this study examined patterns of attribute modification evident during fifth grade students’ mathematical interactions with two mathematics virtual manipulative touchscreen tablet apps. Results included three categories related to attribute modification: (1 reactive attribute modification (linear progression or repeated repetition; (2 unperceived attributes and opportunities for proactive modification; and (3 proactive modification (seeking equilibrium, seeking disequilibrium, or seeking equilibrium and disequilibrium. Findings have implications for designers, teachers, and researchers of educational technology.

  4. Quality planning for major plant design modifications

    International Nuclear Information System (INIS)

    Dulee, R.J.

    1988-01-01

    This paper reviews the approach and activities undertaken by Public Service Electric and Gas Company's (PSE and G's) nuclear quality assurance (QA) department to support major plant design modifications conducted during refueling outages at Salem Generating Station. It includes the planning and implementation of quality plans developed to provide both QA and quality control (QC) coverage of modification performed by contracted service organizations

  5. Modification of the perturbative QCD towards confinement

    International Nuclear Information System (INIS)

    Arodz, H.

    1981-01-01

    Modification of the low momentum behaviour of the perturbative SU(2) gauge theory is proposed. The modification is closely related (although not equivalent) to a nonstandard choice of boundary condition for the Euclidean 2-point gluonic Green function. In the resulting theory already single graphs lead to the confining potential between heavy, static quarks, V(r) = ar 2 for r → infinity. (author)

  6. 75 FR 41529 - Petitions for Modification

    Science.gov (United States)

    2010-07-16

    ... application of existing mandatory safety standards published in Title 30 of the Code of Federal Regulations... DEPARTMENT OF LABOR Mine Safety and Health Administration Petitions for Modification AGENCY: Mine Safety and Health Administration (MSHA), Labor. ACTION: Notice of petitions for modification of existing...

  7. 75 FR 29784 - Petitions for Modification

    Science.gov (United States)

    2010-05-27

    ... application of existing mandatory safety standards published in Title 30 of the Code of Federal Regulations... DEPARTMENT OF LABOR Mine Safety and Health Administration Petitions for Modification AGENCY: Mine Safety and Health Administration (MSHA), Labor. ACTION: Notice of petitions for modification of existing...

  8. 75 FR 34486 - Petitions for Modification

    Science.gov (United States)

    2010-06-17

    ... application of existing mandatory safety standards published in Title 30 of the Code of Federal Regulations... DEPARTMENT OF LABOR Mine Safety and Health Administration Petitions for Modification AGENCY: Mine Safety and Health Administration (MSHA), Labor. ACTION: Notice of petitions for modification of existing...

  9. Conscious design and new technologies for the optimization of therapeutic space

    Directory of Open Access Journals (Sweden)

    Marzia Morena

    2015-04-01

    Full Text Available The project Casa pre-dimissioni is aimed at facilitating the recovery of the daily life by whom suffers of disability, adapting domestic spaces to the specific needs of use. The project was developed, under the aegis of the EU research programme DE3207 FACILE: Support tools for housing design and management, integrated with telematics system and services, devoted to disabled and elderly people (TIDE Program, European Commission DG XIII. The main aim of the project was to define and to implement systems that are integrated with information and communications technologies, and with the home-automation products and equipment designed to improve the quality of life of elderly people and of motor-disabled people (paraplegics and cognitive impaired people in their homes.

  10. Modification Semantics in Now-Relative Databases

    DEFF Research Database (Denmark)

    Torp, Kristian; Jensen, Christian Søndergaard; Snodgrass, R. T.

    2004-01-01

    Most real-world databases record time-varying information. In such databases, the notion of ??the current time,?? or NOW, occurs naturally and prominently. For example, when capturing the past states of a relation using begin and end time columns, tuples that are part of the current state have some...... past time as their begin time and NOW as their end time. While the semantics of such variable databases has been described in detail and is well understood, the modification of variable databases remains unexplored. This paper defines the semantics of modifications involving the variable NOW. More...... specifically,  the problems with modifications in the presence of NOW are explored, illustrating that the main problems are with modifications of tuples that reach into the future. The paper defines the semantics of modifications?including insertions, deletions, and updates?of databases without NOW, with NOW...

  11. Methodological guidelines for developing accident modification functions

    DEFF Research Database (Denmark)

    Elvik, Rune

    2015-01-01

    This paper proposes methodological guidelines for developing accident modification functions. An accident modification function is a mathematical function describing systematic variation in the effects of road safety measures. The paper describes ten guidelines. An example is given of how to use...... limitations in developing accident modification functions are the small number of good evaluation studies and the often huge variation in estimates of effect. It is therefore still not possible to develop accident modification functions for very many road safety measures. © 2015 Elsevier Ltd. All rights...... the guidelines. The importance of exploratory analysis and an iterative approach in developing accident modification functions is stressed. The example shows that strict compliance with all the guidelines may be difficult, but represents a level of stringency that should be strived for. Currently the main...

  12. A Framework for Facility Modification.

    Science.gov (United States)

    1987-09-01

    Department of Civil Engineer4ng, Massachusetts Institute of Technology, Cambridge, MA. Partridge, D. (1986), Artificial Inteligence : Applications in the...34"•. -" .- " BIBLIOGRAPHY Barr, A. and Feigenbaum, E.A. (1981), The Handbook of Artificial Intelligence, Vol. 1, HeurisTech Press, Stanford, CA. Barnaby, F...Engineering Research Laboratory Technical Report N-104iADA Shirai, Y. and Tsuji, J. (1982), Artificial Intelligence: Concepts, Technigues and

  13. Modifications to the INSPECT model

    Energy Technology Data Exchange (ETDEWEB)

    Dickinson, S [AEA Technology, Winfrith (United Kingdom); Sims, H E [AEA Technology, Harwell (United Kingdom)

    1996-12-01

    The prediction of iodine behaviour in the containment of a PWR following a loss of coolant accident requires a reliable model of the chemistry of iodine in aqueous solution. The INSPECT model, which was developed several years ago, contains a large number of the relevant chemical reactions of iodine and water radiation chemistry. Since the reactions set was first assembled, however, new data on rate constants and mechanisms have become available. In addition, the application of the model to various small-scale experiments has revealed problems in the modelling of some reactions, leading to an under-prediction of the iodine volatility at high pH, although the experiments have demonstrated that the high pH volatility remains satisfactory low. This paper describes the modifications which have been made to the INSPECT model to take account of new data and to improve the modelling where appropriate. The main changes which have been made to the reaction set are as follows: - The rate constants and activation energies for the reactions describing the radiolysis of water have been updated in with recent assessments, and the temperature dependence of the G value for the primary species have been accordance taken into account, - The mechanism and rates of I{sub 2} hydrolysis have been modified in accordance with the latest assessments of this reaction, - The mechanism for the reaction of I{sub 2} with H{sub 2}O{sub 2} has been changed to a form which produces a more realistic pH dependence under neutral and alkaline conditions, - An addition mechanism for the disproportionation of the O{sub 2} ion has been included, reflecting experimental observations that this reaction has a significant first-order component under all but the purest conditions, - Atomic I is treated as a volatile species, with a partition coefficient of 1.9 at 298 K. (Abstract Truncated)

  14. Medicare and Medicaid programs; modifications to the Medicare and Medicaid Electronic Health Record (EHR) Incentive Program for 2014 and other changes to EHR Incentive Program; and health information technology: revision to the certified EHR technology definition and EHR certification changes related to standards. Final rule.

    Science.gov (United States)

    2014-09-04

    This final rule changes the meaningful use stage timeline and the definition of certified electronic health record technology (CEHRT) to allow options in the use of CEHRT for the EHR reporting period in 2014. It also sets the requirements for reporting on meaningful use objectives and measures as well as clinical quality measure (CQM) reporting in 2014 for providers who use one of the CEHRT options finalized in this rule for their EHR reporting period in 2014. In addition, it finalizes revisions to the Medicare and Medicaid EHR Incentive Programs to adopt an alternate measure for the Stage 2 meaningful use objective for hospitals to provide structured electronic laboratory results to ambulatory providers; to correct the regulation text for the measures associated with the objective for hospitals to provide patients the ability to view online, download, and transmit information about a hospital admission; and to set a case number threshold exemption for CQM reporting applicable for eligible hospitals and critical access hospitals (CAHs) beginning with FY 2013. Finally, this rule finalizes the provisionally adopted replacement of the Data Element Catalog (DEC) and the Quality Reporting Document Architecture (QRDA) Category III standards with updated versions of these standards.

  15. Modification of GNPS environment radiation monitoring network system

    International Nuclear Information System (INIS)

    Jiang Lili; Cao Chunsheng

    1999-01-01

    GNPS Environment Radiation Continuous Monitoring System (KRS), the only real time on-line system of site radiation monitoring, was put into service in 1993 prior to the first loading the the plant. It is revealed through several years of operation that this system has some deficiencies such as inadequate real time monitoring means, no figure and diagram display function on the central computer, high failures, frequent failure warning signals, thus making the availability of the system at a low level. In recent years, with the rapid development of computer network technology and increasingly strict requirements on the NPP environment protection raised by the government and public, KRS modification had become necessary and urgent. In 1996, GNPS carried out modification work on the measuring geometry condition of γ radiation monitoring sub-station and lightening protection. To enhance the functions of real time monitoring and data auto-processing, further modification of the system was made in 1998, including the update of the software and hardware of KRS central processor, set-up of system computer local network and database. In this way, the system availability and monitoring quality are greatly improved and effective monitoring and analysis means are provided for gaseous release during normal operation and under accident condition

  16. Technical modifications and management innovations in exporting nuclear reactor projects

    International Nuclear Information System (INIS)

    Mao Xiaoming; Qin Xijiu; Ding Hu; Xue Zhaoqun; Wen Shengjun

    2009-01-01

    As a main channel for the foreign economic cooperation of China nuclear industry, China Zhongyuan Engineering Corporation (CZEC) has been constantly engaged in technical modifications and management innovations in its exporting nuclear reactor projects. In the implementation of heavy water research reactor contract in Algeria, CZEC had established a complete and adequate design standards system in compliance with the international standards, and made significant modifications to the reference reactor in the aspects of reactor power and reactor safety, solved quite some technical issues which-affected the reactor technical performance. The modifications and improvements enabled the technical parameters, safety features, reactor multipurpose application to attain to the advanced level in the world. In the 300 MWe PWR NPPs in Pakistan, safety features had been updated in line with upgrading regulatory requisites. The design philosophy and technology application demonstrated CZEC' s creation and innovation on basis of constant safety enhancement of nuclear power projects. Efforts had also been made by CZEC' s creation and innovation on basis of constant safety enhancement of nuclear power projects. Efforts had also been made by CZEC in promoting China made equipment items and components exportation. (authors)

  17. Modification of the colony tower for the Rio Blanco detonation

    International Nuclear Information System (INIS)

    Blume, J.A.; Freeman, S.A.; Honda, K.K.; Lee, L.A.

    1975-01-01

    Supplemental structural bracing was designed and installed for the 180-ft-tall Colony Tower, an experimental oil shale processing retort structure, in anticipation of its lateral response to the Rio Blanco detonation. The tower is a steel structure with both horizontal and vertical diagonal bracing. Data obtained from the earlier Project Rulison detonation indicated that an evaluation study was necessary. Design criteria that would provide an adequate margin of safety were developed based on predicted Rio Blanco ground motion. The evaluation of the unmodified structure showed that several bracing members would be subjected to forces exceeding their yield strength, and some would reach a level at which failure could occur. Further analyses were made with assumed modified bracing members. A final scheme for modified vertical bracing was established and installed. After modification, the response of the tower during the Rio Blanco detonation was measured by instruments on the ground and at various locations on the tower, and no evidence of damage was discovered. The modification of the Colony Tower and the procedures used to determine these modifications show the usefulness of current ground motion and structural response prediction technology for forecasting dynamic behavior of important structures subjected to ground motion from underground nuclear explosions. (auth)

  18. Modification of Sr on 4004 Aluminum Alloy

    Science.gov (United States)

    Guo, Erjun; Cao, Guojian; Feng, Yicheng; Wang, Liping; Wang, Guojun; Lv, Xinyu

    2013-05-01

    As a brazing foil, 4004 Al alloy has good welding performance. However, the high Si content decreases the plasticity of the alloy. To improve the plasticity of 4004 Al alloy and subsequently improve the productivity of 4004 Al foil or 434 composite foil, 4004 Al alloy was modified by Al-10%Sr master alloy. Modification effects of an additional amount of Sr, modification temperature, and holding time on 4004 aluminum alloy were studied by orthogonal design. The results showed that the greatest impact parameter of 4004 aluminum alloy modification was the additional amount of Sr, followed by holding time and modification temperature. The optimum modification parameters obtained by orthogonal design were as follows: Sr addition of 0.04%, holding time of 60 min, and modification temperature of 760°C. The effect of Sr addition on modification was analyzed in detail based on orthogonal results. With increasing of Sr addition, elongation of 4004 alloy increased at first, and decreased after reaching the maximum value.

  19. Epigenetic Modifications: Therapeutic Potential in Cancer

    Directory of Open Access Journals (Sweden)

    Manisha Sachan

    2015-08-01

    Full Text Available Epigenetic modifications and alterations in chromatin structure and function contribute to the cumulative changes observed as normal cells undergo malignant transformation. These modifications and enzymes (DNA methyltransferases, histone deacetylases, histone methyltransferases, and demethylases related to them have been deeply studied to develop new drugs, epigenome-targeted therapies and new diagnostic tools. Epigenetic modifiers aim to restore normal epigenetic modification patterns through the inhibition of epigenetic modifier enzymes. Four of them (azacitidine, decitabine, vorinostat and romidepsin are approved by the U.S. Food and Drug Administration. This article provides an overview about the known functional roles of epigenetic enzymes in cancer development.

  20. Surface modification and characterization for dispersion stability of inorganic nanometer-scaled particles in liquid media

    International Nuclear Information System (INIS)

    Kamiya, Hidehiro; Iijima, Motoyuki

    2010-01-01

    Inorganic nanoparticles are indispensable for science and technology as materials, pigments and cosmetics products. Improving the dispersion stability of nanoparticles in various liquids is essential for those applications. In this review, we discuss why it is difficult to control the stability of nanoparticles in liquids. We also overview the role of surface interaction between nanoparticles in their dispersion and characterization, e.g. by colloid probe atomic force microscopy (CP-AFM). Two types of surface modification concepts, post-synthesis and in situ modification, were investigated in many previous studies. Here, we focus on post-synthesis modification using adsorption of various kinds of polymer dispersants and surfactants on the particle surface, as well as surface chemical reactions of silane coupling agents. We discuss CP-AFM as a technique to analyze the surface interaction between nanoparticles and the effect of surface modification on the nanoparticle dispersion in liquids. (topical review)

  1. Surface modification and characterization for dispersion stability of inorganic nanometer-scaled particles in liquid media

    Directory of Open Access Journals (Sweden)

    Hidehiro Kamiya and Motoyuki Iijima

    2010-01-01

    Full Text Available Inorganic nanoparticles are indispensable for science and technology as materials, pigments and cosmetics products. Improving the dispersion stability of nanoparticles in various liquids is essential for those applications. In this review, we discuss why it is difficult to control the stability of nanoparticles in liquids. We also overview the role of surface interaction between nanoparticles in their dispersion and characterization, e.g. by colloid probe atomic force microscopy (CP-AFM. Two types of surface modification concepts, post-synthesis and in situ modification, were investigated in many previous studies. Here, we focus on post-synthesis modification using adsorption of various kinds of polymer dispersants and surfactants on the particle surface, as well as surface chemical reactions of silane coupling agents. We discuss CP-AFM as a technique to analyze the surface interaction between nanoparticles and the effect of surface modification on the nanoparticle dispersion in liquids.

  2. Constraining Line-of-sight Confusion in the Corona Using Linearly Polarized Observations of the Infrared FeXIII 1075nm and SiX 1430nm Emission Lines

    Science.gov (United States)

    Dima, G. I.; Kuhn, J. R.; Berdyugina, S.

    2017-12-01

    Measurements of the coronal magnetic field are difficult because of the intrinsically faint emission of coronal plasma and the large spurious background due to the bright solar disk. This work addresses the problem of resolving the confusion of the line-of-sight (LOS) integration through the optically-thin corona being observed. Work on developing new measuring techniques based on single-point inversions using the Hanle effect has already been described (Dima et al. 2016). It is important to develop a technique to assess when the LOS confusion makes comparing models and observations problematic. Using forward integration of synthetic emission through magnetohydrodynamic (MHD) models together with simultaneous linearly polarized observations of the FeXIII 1075nm and SiX 1430nm emission lines allows us to assess LOS confusion. Since the lines are both in the Hanle saturated regime their polarization angles are expected to be aligned as long as the gas is sampling the same magnetic field. If significant contributions to the emission is taking place from different regions along the LOS due to the additive nature of the polarized brightness the measured linear polarization between the two lines will be offset. The size of the resolution element is important for this determination since observing larger coronal regions will confuse the variation along the LOS with that in the plane-of-sky. We also present comparisons between synthetic linearly polarized emission through a global MHD model and observations of the same regions obtained using the 0.5m Scatter-free Observatory for Limb Active Regions and Coronae (SOLARC) telescope located on Haleakala, Maui. This work is being done in preparation for the type of observations that will become possible when the next generation 4m DKIST telescope comes online in 2020.

  3. Fundamentos históricos e teóricos da noção de soberania: a contribuição dos "Papas juristas" do século XIII

    Directory of Open Access Journals (Sweden)

    Raquel Kritsch

    2010-12-01

    Full Text Available O objetivo deste artigo é discutir a contribuição do pensamento eclesiástico medieval tardio para a formação do conceito de soberania. Como o Estado moderno, tal conceito tem uma gênese demorada: é parte de um processo de transformação jurídica e política, do qual resulta um novo mapeamento do poder e das lealdades na Europa. A conformação desse novo sistema de poder tem como contrapartida a constituição de uma nova ordem jurídica. Essa ordem redefine os vínculos de comando e obediência, constituindo unida des políticas como áreas de jurisdição exclusiva e estabelecendo, entre essas unidades, relações de igualdade: nenhuma se reconhece como subordinada a outra. Todas essas questões podem ser entendidas como disputas de jurisdição. Trata-se de saber quem julga e quem pune delitos civis ou violações de normas religiosas. Os poderes de legislar, de mudar a lei, de resolver como últi ma instância e de controlar o uso da violência constituem o que os autores modernos nomearam soberania. Apontar a contribuição dos chamados Papas juristas do século XIII para a formulação de alguns elementos centrais a esta definição é a tarefa a ser leva da a cabo neste estudo.

  4. O perfil do empreendedor social e seu papel na continuidade de instituições do terceiro setor: o caso da Assistência Social Diocesana LeãoXIII de Passo Fundo – RS.

    Directory of Open Access Journals (Sweden)

    Ana Claúdia Machado Padilha

    2009-05-01

    Full Text Available O empreendedorismo tem sido abordado, cada vez mais, por organizações sem fins lucrativos que buscam excelência nas suas ações sociais. O estudo apresenta os resultados empíricos constituídos do perfil dos gestores da Assistência Social Diocesana Leão XIII, à luz dos conceitos do empreendedorismo social e os resultados alcançados ao longo do tempo na comunidade em que atua. Para isso, foram realizadas entrevistas com os três gestores e oito alunos da Escola Profissionalizante e aplicados questionários aos dez coordenadores dos núcleos e treze adolescentes assistidos pela Instituição. Na etapa da análise dos dados, foi utilizada a técnica de análise do conteúdo das respostas dos questionários e entrevistas segundo os critérios da literatura selecionada. Dentre os resultados significativos, percebeu-se que os gestores apresentaram um perfil alinhado ao sugerido pela literatura do empreendedorismo social, que converge para as ações pretendidas pela Instituição: trabalham em equipe; têm iniciativa para desenvolver as ações empreendedoras, apesar de não possuírem autonomia; são comprometidos com a causa social e indignam-se com as desigualdades sociais; são persistentes, responsáveis e têm senso de solidariedade.

  5. Verslag: �Society of Biblical Literature (SBL 1989 International Meeting�, 6 tot 9 Augustus 1989 te Kopenhagen, Denemarke; en �The XIII Congress of the International Organization for the study of the Old Testament (IOSOT�, 27 Augustus tot 1 September 19

    Directory of Open Access Journals (Sweden)

    W. S. Prinsloo

    1990-08-01

    Full Text Available "Society of Biblical Literature (SBL 1989 International Meeting". 6-9 August 1989, Copenhagen, Denmark; and "The XIII Congress of the International Organization for the study of the Old Testament (IOSOT". 27 August to 1 September 1989, Leuven, Belgium This article is a report on the IOSOT Congress at Leuven. Belgium, and the SBL Congress in Copenhagen, Denmark. It contains brief summaries of the more important papers read and indicates some of the more significant trends which emerged at the two congresses.

  6. Some high-current ion sources for materials modification

    International Nuclear Information System (INIS)

    Taylor, T.

    1989-01-01

    Ion sources for materials modification have evolved through three distinct generations. The first generation was adopted from research accelerators. These cold-cathode plasma-discharge devices generate beam currents of less than 100 μA. The hot-cathode plasma-discharge ion sources, originally developed for isotope separation, comprise the second generation. They produce between 100 μA and 10 mA of beam current. The third generation ion sources give beam currents in excess of 10 mA. This technology, transferred from industrial accelerators, has already made SIMOX (Separation by IMplanted OXygen) into a commercially viable semiconductor process and promises to do the same for ion implantation of metals and insulators. The author focuses on the third generation technology that will play a key role in the future of ion implantation. 10 refs.; 5 figs.; 2 tabs

  7. Structural modification in the formation of starch – silver nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Begum, S. N. Suraiya; Ramasamy, Radha Perumal, E-mail: perumal.ramasamy@gmail.com [Department of Applied Science and Technology, A.C.Tech. Campus, Anna University, Chennai – 600 025 (India); Aswal, V. K. [Solid State Physics Division, Bhabha Atomic Research Center, Trombay, Mumbai (India)

    2016-05-23

    Polymer based nanocomposites have gained wide applications in field of battery technology. Starch is a naturally occurring polysaccharide with sustainable properties such as biodegradable, non toxic, excellent film forming capacity and it also act as reducing agent for the metal nanoparticles. In our research various concentration of silver nitrate (AgNO{sub 3}) was added to the starch solution and films were obtained using solution casting method. Surface electron microscope (SEM) of the films shows modifications depending upon the concentration of AgNO{sub 3}. Small angle neutron scattering (SANS) analysis showed that addition of silver nitrate modifies the starch to disc like structures and with increasing the AgNO{sub 3} concentration leads to the formation of fractals. This research could benefit battery technology where solid polymer membranes using starch is used.

  8. Structural modification in the formation of starch – silver nanocomposites

    International Nuclear Information System (INIS)

    Begum, S. N. Suraiya; Ramasamy, Radha Perumal; Aswal, V. K.

    2016-01-01

    Polymer based nanocomposites have gained wide applications in field of battery technology. Starch is a naturally occurring polysaccharide with sustainable properties such as biodegradable, non toxic, excellent film forming capacity and it also act as reducing agent for the metal nanoparticles. In our research various concentration of silver nitrate (AgNO_3) was added to the starch solution and films were obtained using solution casting method. Surface electron microscope (SEM) of the films shows modifications depending upon the concentration of AgNO_3. Small angle neutron scattering (SANS) analysis showed that addition of silver nitrate modifies the starch to disc like structures and with increasing the AgNO_3 concentration leads to the formation of fractals. This research could benefit battery technology where solid polymer membranes using starch is used.

  9. Structural modification in the formation of starch - silver nanocomposites

    Science.gov (United States)

    Begum, S. N. Suraiya; Aswal, V. K.; Ramasamy, Radha Perumal

    2016-05-01

    Polymer based nanocomposites have gained wide applications in field of battery technology. Starch is a naturally occurring polysaccharide with sustainable properties such as biodegradable, non toxic, excellent film forming capacity and it also act as reducing agent for the metal nanoparticles. In our research various concentration of silver nitrate (AgNO3) was added to the starch solution and films were obtained using solution casting method. Surface electron microscope (SEM) of the films shows modifications depending upon the concentration of AgNO3. Small angle neutron scattering (SANS) analysis showed that addition of silver nitrate modifies the starch to disc like structures and with increasing the AgNO3 concentration leads to the formation of fractals. This research could benefit battery technology where solid polymer membranes using starch is used.

  10. Post-Translational Modifications of TRP Channels

    Directory of Open Access Journals (Sweden)

    Olaf Voolstra

    2014-04-01

    Full Text Available Transient receptor potential (TRP channels constitute an ancient family of cation channels that have been found in many eukaryotic organisms from yeast to human. TRP channels exert a multitude of physiological functions ranging from Ca2+ homeostasis in the kidney to pain reception and vision. These channels are activated by a wide range of stimuli and undergo covalent post-translational modifications that affect and modulate their subcellular targeting, their biophysical properties, or channel gating. These modifications include N-linked glycosylation, protein phosphorylation, and covalent attachment of chemicals that reversibly bind to specific cysteine residues. The latter modification represents an unusual activation mechanism of ligand-gated ion channels that is in contrast to the lock-and-key paradigm of receptor activation by its agonists. In this review, we summarize the post-translational modifications identified on TRP channels and, when available, explain their physiological role.

  11. Chemical modification of flax reinforced polypropylene composites

    CSIR Research Space (South Africa)

    Jacob John, Maya

    2009-04-01

    Full Text Available This paper presents an experimental study on the static and dynamic mechanical properties of nonwoven based flax fibre reinforced polypropylene composites. The effect of zein modification on flax fibres is also reported. Flax nonwovens were treated...

  12. Modifications of the Weibull distribution: A review

    International Nuclear Information System (INIS)

    Almalki, Saad J.; Nadarajah, Saralees

    2014-01-01

    It is well known that the Weibull distribution is the most popular and the most widely used distribution in reliability and in analysis of lifetime data. Unfortunately, its hazard function cannot exhibit non-monotonic shapes like the bathtub shape or the unimodal shape. Since 1958, the Weibull distribution has been modified by many researchers to allow for non-monotonic hazard functions. This paper gives an extensive review of some discrete and continuous versions of the modifications of the Weibull distribution. - Highlights: • A comprehensive review of known discrete modifications and generalizations of the Weibull distribution. • A comprehensive review of known continuous modifications and generalizations of the Weibull distribution. • Over 110 references on modifications/generalizations of the Weibull distribution. • More than 55% of the cited references appeared in the last 5 years

  13. ENDF/B-5 modifications 1986

    International Nuclear Information System (INIS)

    McLaughlin, P.K.

    1986-05-01

    This document summarizes the modifications made to the ENDF/B-5 evaluated neutron data files in 1986. The new versions of the files are available from the IAEA Nuclear Data Section upon request, costfree, on magnetic tape. (author)

  14. The computational nature of memory modification.

    Science.gov (United States)

    Gershman, Samuel J; Monfils, Marie-H; Norman, Kenneth A; Niv, Yael

    2017-03-15

    Retrieving a memory can modify its influence on subsequent behavior. We develop a computational theory of memory modification, according to which modification of a memory trace occurs through classical associative learning, but which memory trace is eligible for modification depends on a structure learning mechanism that discovers the units of association by segmenting the stream of experience into statistically distinct clusters (latent causes). New memories are formed when the structure learning mechanism infers that a new latent cause underlies current sensory observations. By the same token, old memories are modified when old and new sensory observations are inferred to have been generated by the same latent cause. We derive this framework from probabilistic principles, and present a computational implementation. Simulations demonstrate that our model can reproduce the major experimental findings from studies of memory modification in the Pavlovian conditioning literature.

  15. Chemical modification and characterization of quaternized polysulfones.

    CSIR Research Space (South Africa)

    Nonjola, P

    2008-12-01

    Full Text Available Synthesis and characterization of anion-exchange membranes (AEMs) using polysulfones is described. The modification process of polysulfones involves two steps: Firstly, by introducing chloromethyl groups followed by quaternization reaction...

  16. Formal Design Review Foot Clamp Modification

    International Nuclear Information System (INIS)

    OTEN, T.C.

    2000-01-01

    This report documents the Design Review performed for the foot clamp modification. The report documents the acceptability of the design, identifies the documents that were reviewed, the scope of the review and the members of the review team

  17. The computational nature of memory modification

    Science.gov (United States)

    Gershman, Samuel J; Monfils, Marie-H; Norman, Kenneth A; Niv, Yael

    2017-01-01

    Retrieving a memory can modify its influence on subsequent behavior. We develop a computational theory of memory modification, according to which modification of a memory trace occurs through classical associative learning, but which memory trace is eligible for modification depends on a structure learning mechanism that discovers the units of association by segmenting the stream of experience into statistically distinct clusters (latent causes). New memories are formed when the structure learning mechanism infers that a new latent cause underlies current sensory observations. By the same token, old memories are modified when old and new sensory observations are inferred to have been generated by the same latent cause. We derive this framework from probabilistic principles, and present a computational implementation. Simulations demonstrate that our model can reproduce the major experimental findings from studies of memory modification in the Pavlovian conditioning literature. DOI: http://dx.doi.org/10.7554/eLife.23763.001 PMID:28294944

  18. 75 FR 3253 - Petitions for Modification

    Science.gov (United States)

    2010-01-20

    ... face equipment; maintenance) and 30 CFR 18.35 (Portable trailing cables and cords). Modification...) Limit the speed of the machine to 10 miles per hour (MPH) by permanently blocking out any gear that...

  19. Medication for Behavior Modification in Birds

    NARCIS (Netherlands)

    van Zeeland, Yvonne

    2018-01-01

    The use of behavior modifying drugs may be considered in birds with behavior problems, especially those refractory to behavior modification therapy and environmental management. To accomplish behavior change, a variety of drugs can be used, including psychoactive drugs, hormones, antihistamines,

  20. Determinants of consumer attitudes and purchase intentions with regard to genetically modifed foods

    DEFF Research Database (Denmark)

    Bredahl, Lone

    2001-01-01

    of the technology. Purchase decisions with regard to the two product examples were almost exclusively determined by attitudes towards purchasing the products. These were, in turn, significantly influenced by the overall attitude towards genetic modification in food production through their effects on beliefs held...... which was carried out in Denmark, Germany, Italy and the United Kingdom to investigate the formation of consumer attitudes towards genetic modification in food production and of purchase decisions with regard to genetically modified yoghurt and beer. Altogether, 2031 consumers were interviewed...... consumers. Across countries, the attitude towards genetic modification in food production was deeply embedded in more general attitudes held by the consumers, in particular attitude towards nature and attitude towards technology. These general attitudes were found to influence perceived risks and benefits...

  1. Covalent Surface Modifications of Carbon Nanotubes.

    Energy Technology Data Exchange (ETDEWEB)

    Pavia Sanders, Adriana [Sandia National Lab. (SNL-CA), Livermore, CA (United States); O' Bryan, Greg [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2017-07-01

    A report meant to document the chemistries investigated by the author for covalent surface modification of CNTs. Oxidation, cycloaddition, and radical reactions were explored to determine their success at covalently altering the CNT surface. Characterization through infrared spectroscopy, Raman spectroscopy, and thermo gravimetric analysis was performed in order to determine the success of the chemistries employed. This report is not exhaustive and was performed for CNT surface modification exploration as it pertains to the "Next Gen" project.

  2. A novel modification of the Turing test for artificial intelligence and robotics in healthcare.

    Science.gov (United States)

    Ashrafian, Hutan; Darzi, Ara; Athanasiou, Thanos

    2015-03-01

    The increasing demands of delivering higher quality global healthcare has resulted in a corresponding expansion in the development of computer-based and robotic healthcare tools that rely on artificially intelligent technologies. The Turing test was designed to assess artificial intelligence (AI) in computer technology. It remains an important qualitative tool for testing the next generation of medical diagnostics and medical robotics. Development of quantifiable diagnostic accuracy meta-analytical evaluative techniques for the Turing test paradigm. Modification of the Turing test to offer quantifiable diagnostic precision and statistical effect-size robustness in the assessment of AI for computer-based and robotic healthcare technologies. Modification of the Turing test to offer robust diagnostic scores for AI can contribute to enhancing and refining the next generation of digital diagnostic technologies and healthcare robotics. Copyright © 2014 John Wiley & Sons, Ltd.

  3. O-GlcNAc modification: why so intimately associated with phosphorylation?

    Directory of Open Access Journals (Sweden)

    Ande Sudharsana R

    2011-01-01

    Full Text Available Abstract Post-translational modification of proteins at serine and threonine side chains by β-N-acetylglucosamine (O-GlcNAc mediated by the enzyme β-N-acetylglucosamine transferase has been emerging as a fundamental regulatory mechanism encompassing a wide range of proteins involved in cell division, metabolism, transcription and cell signaling. Furthermore, an extensive interplay between O-GlcNAc modification and serine/threonine phosphorylation in a variety of proteins has been reported to exist. However, our understanding of the regulatory mechanisms involved in O-GlcNAc modification and its interplay with serine/threonine phosphorylation in proteins is still elusive. Recent success in the mapping of O-GlcNAc modification sites in proteins as a result of technological advancement in mass spectrometry have revealed two important clues which may be inherently connected to the regulation of O-GlcNAc modification and its interplay with phosphorylation in proteins. First, almost all O-GlcNAc modified proteins are known phospho proteins. Second, the prevalence of tyrosine phosphorylation among O-GlcNAc modified proteins is exceptionally higher (~68% than its normal occurrence (~2% alone. We hypothesize that phosphorylation may be a requisite for O-GlcNAc modification and tyrosine phosphorylation plays a role in the interplay between O-GlcNAc modification and serine/threonine phosphorylation in proteins. In other words, the interplay between O-GlcNAc modification and phosphorylation is not limited to serine/threonine phosphorylation but also includes tyrosine phosphorylation. Our hypothesis provides an opportunity to understand the underlying mechanism involved in O-GlcNAc modification and its interplay with serine/threonine phosphorylation in proteins. Furthermore, implication of our hypothesis extends to tyrosine kinase signaling.

  4. Modifications to nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2004-01-01

    This Safety Guide was prepared under the IAEA's programme for safety standards for nuclear power plants. It supplements Section 7 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation, which establishes the safety requirements for the modification of nuclear power plants. Reasons for carrying out modifications to nuclear power plants may include: (1) maintaining or strengthening existing safety provisions and thus maintaining consistency with or improving on the current design. (2) recovering from plant faults. (3) improving the thermal performance or increasing the power rating of the plant. (4) increasing the maintainability of the plant, reducing the radiation exposure of personnel or reducing the costs of plant maintenance. And (5) extending the design life of the plant. Most modifications, made on the basis of operating experience, are intended to improve on the design or to improve operational performance and flexibility. Some are rendered necessary by new regulatory requirements, ageing of the plant or obsolescence of equipment. However, the benefits of regularly updating the plant design can be jeopardized if modifications are not kept under rigorous control throughout the lifetime of the plant. The need to reduce costs and improve efficiency, in combination with changes to the structure of the electricity generation sector of the economy in many countries, has led many companies to make changes in the structure of the operating organization for nuclear power plants. Whatever the reason for such organizational changes, consideration should be given to the effects of those changes with the aim of ensuring that they would have no impacts that would compromise the safety of the plant. The objective of this Safety Guide is to provide guidance and recommendations on controlling activities relating to modifications at nuclear power plants in order to reduce risk and to ensure that the configuration of the plant is at all times under

  5. Modifications to nuclear power plants. Safety guide

    International Nuclear Information System (INIS)

    2007-01-01

    This Safety Guide was prepared under the IAEA's programme for safety standards for nuclear power plants. It supplements Section 7 of the Safety Requirements publication on Safety of Nuclear Power Plants: Operation, which establishes the safety requirements for the modification of nuclear power plants. Reasons for carrying out modifications to nuclear power plants may include: (1) maintaining or strengthening existing safety provisions and thus maintaining consistency with or improving on the current design. (2) recovering from plant faults. (3) improving the thermal performance or increasing the power rating of the plant. (4) increasing the maintainability of the plant, reducing the radiation exposure of personnel or reducing the costs of plant maintenance. And (5) extending the design life of the plant. Most modifications, made on the basis of operating experience, are intended to improve on the design or to improve operational performance and flexibility. Some are rendered necessary by new regulatory requirements, ageing of the plant or obsolescence of equipment. However, the benefits of regularly updating the plant design can be jeopardized if modifications are not kept under rigorous control throughout the lifetime of the plant. The need to reduce costs and improve efficiency, in combination with changes to the structure of the electricity generation sector of the economy in many countries, has led many companies to make changes in the structure of the operating organization for nuclear power plants. Whatever the reason for such organizational changes, consideration should be given to the effects of those changes with the aim of ensuring that they would have no impacts that would compromise the safety of the plant. The objective of this Safety Guide is to provide guidance and recommendations on controlling activities relating to modifications at nuclear power plants in order to reduce risk and to ensure that the configuration of the plant is at all times under

  6. Proposal of Modification Strategy of NC Program in the Virtual Manufacturing Environment

    Science.gov (United States)

    Narita, Hirohisa; Chen, Lian-Yi; Fujimoto, Hideo; Shirase, Keiichi; Arai, Eiji

    Virtual manufacturing will be a key technology in process planning, because there are no evaluation tools for cutting conditions. Therefore, virtual machining simulator (VMSim), which can predict end milling processes, has been developed. The modification strategy of NC program using VMSim is proposed in this paper.

  7. 75 FR 26025 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program

    Science.gov (United States)

    2010-05-10

    ... technologies, we have created new definitions for membrane separation and raw starch hydrolysis. We also... technical errors and areas within the final RFS2 regulations that could benefit from clarification or... benefit from clarification or modification. As a result, we are making the following amendments to the...

  8. Surface Modification of Sputtered Ga.5In.5Sb Thin Films ISHU ...

    African Journals Online (AJOL)

    MICHAEL

    IR detectors useful for fiber optic communication. Since the efficiency of detector depends very much on the surface properties of the substrate material, improvement of substrate surfaces is a challenging task in device technology. Reports on the improved electrical properties of GaAs and InP surfaces by. Ru3+ modification ...

  9. Plasma-Assisted Synthesis and Surface Modification of Electrode Materials for Renewable Energy.

    Science.gov (United States)

    Dou, Shuo; Tao, Li; Wang, Ruilun; El Hankari, Samir; Chen, Ru; Wang, Shuangyin

    2018-02-14

    Renewable energy technology has been considered as a "MUST" option to lower the use of fossil fuels for industry and daily life. Designing critical and sophisticated materials is of great importance in order to realize high-performance energy technology. Typically, efficient synthesis and soft surface modification of nanomaterials are important for energy technology. Therefore, there are increasing demands on the rational design of efficient electrocatalysts or electrode materials, which are the key for scalable and practical electrochemical energy devices. Nevertheless, the development of versatile and cheap strategies is one of the main challenges to achieve the aforementioned goals. Accordingly, plasma technology has recently appeared as an extremely promising alternative for the synthesis and surface modification of nanomaterials for electrochemical devices. Here, the recent progress on the development of nonthermal plasma technology is highlighted for the synthesis and surface modification of advanced electrode materials for renewable energy technology including electrocatalysts for fuel cells, water splitting, metal-air batteries, and electrode materials for batteries and supercapacitors, etc. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Modifications at operating nuclear power plants

    International Nuclear Information System (INIS)

    Duffy, T.J.; Gazda, P.A.

    1985-01-01

    Modifications at operating nuclear power plants offer the structural engineer many challenges in the areas of scheduling of work, field adjustments, and engineering staff planning. The scheduling of structural modification work for operating nuclear power plants is normally closely tied to planned or unplanned outages of the plant. Coordination between the structural engineering effort, the operating plant staff, and the contractor who will be performing the modifications is essential to ensure that all work can be completed within the allotted time. Due to the inaccessibility of some areas in operating nuclear power plants or the short time available to perform the structural engineering in the case of an unscheduled outrage, field verification of a design is not always possible prior to initiating the construction of the modification. This requires the structural engineer to work closely with the contractor to promptly resolve problems due to unanticipated interferences or material procurement problems that may arise during the course of construction. The engineering staff planning for structural modifications at an operating nuclear power plant must be flexible enough to permit rapid response to the common ''fire drills,'' but controlled enough to ensure technically correct designs and to minimize the expenditure of man-hours and the resulting engineering cost

  11. Ammonia modification for flotation separation of polycarbonate and polystyrene waste plastics.

    Science.gov (United States)

    Wang, Chong-Qing; Wang, Hui; Gu, Guo-Hua; Lin, Qing-Quan; Zhang, Ling-Ling; Huang, Luo-Luo; Zhao, Jun-Yao

    2016-05-01

    A promising method, ammonia modification, was developed for flotation separation of polycarbonate (PC) and polystyrene (PS) waste plastics. Ammonia modification has little effect on flotation behavior of PS, while it changes significantly that of PC. The PC recovery in the floated product drops from 100% to 3.17% when modification time is 13min and then rises to 100% after longer modification. The mechanism of ammonia modification was studied by contact angle, and Fourier transform infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS) measurements. Contact angle of PC indicates the decline of PC recovery in the floated product is ascribed to an increase in surface wettability. FT-IR and XPS spectra suggest that ammonia modification causes chemical reactions occurred on PC surface. Flotation behavior of ammonia-modified PC and PS was investigated with respect to flotation time, frother concentration and particle sizes. Flotation separation of PC and PS waste plastics was conducted based on the flotation behavior of single plastic. PC and PS mixtures with different particle sizes are separated efficiently, implying that the technology possesses superior applicability to particle sizes of plastics. The purity of PS and PC is up to 99.53% and 98.21%, respectively, and the recovery of PS and PC is larger than 92.06%. A reliable, cheap and effective process is proposed for separation of PC and PS waste plastics. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Photon technology. Hard photon technology; Photon technology. Hard photon gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For the application of photon to industrial technologies, in particular, a hard photon technology was surveyed which uses photon beams of 0.1-200nm in wavelength. Its features such as selective atom reaction, dense inner shell excitation and spacial high resolution by quantum energy are expected to provide innovative techniques for various field such as fine machining, material synthesis and advanced inspection technology. This wavelength region has been hardly utilized for industrial fields because of poor development of suitable photon sources and optical devices. The developmental meaning, usable time and issue of a hard photon reduction lithography were surveyed as lithography in ultra-fine region below 0.1{mu}m. On hard photon analysis/evaluation technology, the industrial use of analysis, measurement and evaluation technologies by micro-beam was viewed, and optimum photon sources and optical systems were surveyed. Prediction of surface and surface layer modification by inner shell excitation, the future trend of this process and development of a vacuum ultraviolet light source were also surveyed. 383 refs., 153 figs., 17 tabs.

  13. Modifications to Battery chargers and inverters Units

    International Nuclear Information System (INIS)

    Raison, Florent

    2015-01-01

    Over-exceeding the seismic specifications of the nuclear industry has always been the top priority of AEG Power Solutions. Since the Forsmark event, and especially since the Fukushima Daichi accident, utilities have reviewed their specifications. As a consequence, safety related battery chargers and inverters have to withstand higher acceleration levels. Simulation, design and test procedures are key drivers of the battery charger and inverter industry. Forces analysis through simulation is the first step of the product design process. The CAD drawings of our equipment, including the mechanical frame of the cabinet and the internal components, are used for the simulation of vibration. In the frame of 10 Hz, most new specifications show higher values, with higher constraints on our equipment. Our nuclear product range has been adapted to these new requirements. PCBs (Printed Circuit Boards), as key components in charge of the regulation and monitoring of the load, are first separately tested during the design phase, as a specific component. They are subjected to the following tests: Critical load analysis, Thermal imaging, Climatic test, Vibration and shock test. Then the complete equipment will follow a complete test program, including: Type test, EMC test, Seismic test, Aging test. Technology is key in achieving goals in terms of robustness and reliability of battery chargers and inverters. AEG Power Solutions renewed its entire range of products in 2011-2013 and made relevant choices. By updating its complete range of nuclear products, AEG Power Solutions is now offering a new range of solutions to the nuclear industry which minimize the risk of component obsolescence, in case of product replacement on existing nuclear power plants, or of new construction. In order to increase the product reliability and to facilitate the qualification programs of the products, the decision was made to offer 100% analogue technology (Software free). The different regulation and

  14. Proposed Modification of the Progressive Retirement Programme

    CERN Document Server

    2003-01-01

    After discussion at TREF on 29 October 2003, the Management proposes in this document a modification affecting one of the general principles of the Progressive Retirement Programme (PRP), decided by the Council in December 1996 and introduced in April 1997. This modification would authorise the Director-General, in exceptional cases, as indicated in section 3 below, and, with the staff member's consent, to cancel his or her participation in the PRP and to reinstate the staff member in his or her original contractual situation. No modifications to the Staff Rules and Regulations are required. The proposal set out in section 3 of the present document is submitted by the Management, after consultation of the Governing Board of the Pension Fund, for recommendation by the Finance Committee to the Council and for approval by the Council, to enter into force as of 1 January 2004.

  15. Identification and Interrogation of Combinatorial Histone Modifications

    Directory of Open Access Journals (Sweden)

    Kelly R Karch

    2013-12-01

    Full Text Available Histone proteins are dynamically modified to mediate a variety of cellular processes including gene transcription, DNA damage repair, and apoptosis. Regulation of these processes occurs through the recruitment of non-histone proteins to chromatin by specific combinations of histone post-translational modifications (PTMs. Mass spectrometry has emerged as an essential tool to discover and quantify histone PTMs both within and between samples in an unbiased manner. Developments in mass spectrometry that allow for characterization of large histone peptides or intact protein has made it possible to determine which modifications occur simultaneously on a single histone polypeptide. A variety of techniques from biochemistry, biophysics, and chemical biology have been employed to determine the biological relevance of discovered combinatorial codes. This review first describes advancements in the field of mass spectrometry that have facilitated histone PTM analysis and then covers notable approaches to probe the biological relevance of these modifications in their nucleosomal context.

  16. Three Sisters Dam modifications and performance

    Energy Technology Data Exchange (ETDEWEB)

    Courage, L.J.R. [Monenco AGRA Inc., Calgary, AB (Canada)

    1995-12-31

    Recent modifications and maintenance carried out at the Three Sisters Dam, in the Alberta Rockies south of the town of Canmore, were described. A detailed account was given of the dam`s geological setting, its abnormally high leakage through the foundation and its sinkhole activity. Results of studies aimed at finding the cause of leakage and sinkhole occurrences were reviewed. Modifications made to the dam since 1951 were detailed, as were modifications to handle probable maximum flood levels. Three approaches for estimating failure probabilities after identification of failure modes were described. The overall conclusion was that based on constant leakage, no settlement in the dam, penstocks, or the powerhouse since construction, the Three Sisters Dam was stable. 1 ref.

  17. Nanofibrillated Cellulose Surface Modification: A Review

    Directory of Open Access Journals (Sweden)

    Julien Bras

    2013-05-01

    Full Text Available Interest in nanofibrillated cellulose (NFC has increased notably over recent decades. This bio-based nanomaterial has been used essentially in bionanocomposites or in paper thanks to its high mechanical reinforcement ability or barrier property respectively. Its nano-scale dimensions and its capacity to form a strong entangled nanoporous network have encouraged the emergence of new high-value applications. It is worth noting that chemical surface modification of this material can be a key factor to achieve a better compatibility with matrices. In order to increase the compatibility in different matrices or to add new functions, surface chemical modification of NFC appears to be the prior choice to conserve its intrinsic nanofibre properties. In this review, the authors have proposed for the first time an overview of all chemical grafting strategies used to date on nanofibrillated cellulose with focus on surface modification such as physical adsorption, molecular grafting or polymer grafting.

  18. Characteristic measurements of JRR-2 after modification

    International Nuclear Information System (INIS)

    1977-03-01

    JRR-2 was shut down in December 1973, to improve it in heavy water leakage from the metal packing between core tank and support ring, corrosion of the lower shielding plug, and fault in the control-rod mechanism. Modification was on a standing seal to stop heavy water leakage at the support ring, replacement of the reactor top shield, replacement of the control-rod mechanism, improvement of the helium system, improvement of the irradiated air system to reduce radioactive argon gas release from the stack. Works were completed in September 1975. Functional tests and characteristic measurements then followed, to show good results of the modification. Described are; modification, critical experiments, calibration of the control rods, reactor thermal power, measurements of the neutron flux distribution, core heavy water flow distribution, heavy water decomposition rate, helium leak rate and tritium concentration in the thermal shielding light water, radioactive argon gas release from the stack, and effect of the reactor top shield. (auth.)

  19. Disassembling and modification of RA-3

    International Nuclear Information System (INIS)

    Tarizzo, R.D.

    1990-01-01

    The objective of this paper is to describe the partial disassembling and modification of RA-3, called the Modernization Project. It comprises all the technical and administrative steps directly related with this task. The improvement of RA-3 is a result of the lack of 90% enriched uranium obliging a change over to 20% enriched uranium. This brought about design modifications both in fuel elements and the reactor. The presentation of documents for the licensing authority as well as are detailed separately. The modernization project was divided in 25 tasks: 1) changing fuel element support table, 2) changing heat exchanger, 3) repairing of cooling towers, 4) repairing of primary circuit valves, 5) repairing of irradiation channels, 6) construction of a new sampler, 7) changing tangential channel, 8) cleaning and disassembling of reactor (inside), 9) changing continuous demineralizer (ion exchange column), 10) detection of failure in fuel elements, 11) modification of nuclear instrumentation, 12) modification of conventional instrumentation, 13) modification of electrical system, 14) changing telemanipulators, 15) construction of mechanism bridge, 16) changing a primary circuit valve when the heat exchanger is changed too, 17) painting ground floor, hall floor, and pump room floor with epoxy resin levelling, 18) installation of fire alarm system, 19) radioactive liquid discharge, 20) modification of secondary circuit (This task involves: a) installation of a third secondary pump, b) extension of this piping, c) installation of two 12 inch valves to the present cooling towers pools independent, d) installation of filtering system), 21) optimization hot water bed, 22) changing detector support table, 23) removal, decontamination and reinstallation of shielding, 25) changing pneumatic system

  20. "Notae in cartulis" en la documentación madrileña del siglo XIII : contribución al estudio de la elaboración del documento privado en Castilla

    Directory of Open Access Journals (Sweden)

    María Teresa Carrasco Lazareno

    1997-01-01

    Full Text Available Edición y análisis diplomático de tres «notae in cartulis» o notas preparatorias del documento definitivo, redactadas en hojas sueltas de pergamino, pertenecientes a la colección del convento de Santo Domingo el Real de Madrid. Datadas en la segunda mitad del siglo xiii y escritas por «scriptores» profesionales, antecedentes inmediatos del «publicus notarius», resumen los aspectos esenciales de dos apeos y de una permuta. Estas «notae» tienen interés como antecedentes de las minutas y de los protocolos notariales y por ser escasos los testimonios originales conservados. Además, nos permiten constatar que la validez jurídica de la nota en la etapa prenotarial —aún no «scriptura matrix»— podía ser similar a la de la «scriptura originalis», pues en estos casos no debieron redactarse las correspondientes cartas, siendo la nota el único título acreditativo de la consecución del negocio jurídico.Edition and diplomatic analysis of tíiree «notae in cartulis» or preparatory notes of the final document, written on loóse sheet of parchment, from the documentary resources of the monastery of Saint Dominio the Royal in Madrid. Dated in the second part of the thirteenth century and written by professional «scriptores», inmediate precedent of the «publicus notarius», they sum up the most esential aspects of two fixing of boundaries and one barter. These «notae» are important considered as an antecedent of notes and notarial registers, being quite rare the original testimonies kept. Besides, the allow us to confirm that the «notae» juridical validity in the prenotarial phase —not yet «scriptura matrix»— could be similar to the «scriptura originalis», because in these cases the respective documents were not written, being the note the only evidential title of the juridical «negotium» obtaining.

  1. Análisis de la elección de la pierna de ataque predominante en la prueba de 400 m vallas de los XIII Campeonatos del Mundo de Atletismo Daegu 2011

    Directory of Open Access Journals (Sweden)

    José Luis López del Amo

    2012-12-01

    Full Text Available Objetivos: Analizar la utilización de una u otra pierna como pierna de ataque predominante en atletas de 400 m vallas de alto nivel. Método: El estudio es descriptivo de corte transversal. Se estudiaron todas las carreras de 400 m vallas de los 72 participantes (34 hombres y 38 mujeres en los XIII Campeonatos del Mundo de Atletismo Daegu 2011, mediante la grabación en video desde la tribuna principal del Daegu Stadium de las 18 carreras de 400 m vallas disputadas, y el posterior análisis mediante la aplicación informática Kinovea 0.8.4. Resultados: Por atletas, en el total de las carreras masculinas, la pierna de ataque predominante fue la izquierda con un 63,6 % (42 atletas y con la pierna derecha hubo un 34,8 % (23 atletas. Solo en un caso había un equilibrio entre izquierda y derecha. En la final hubo un 75 % (6 atletas cuya pierna predominante de ataque fue la izquierda. En cuanto a las mujeres, la pierna de ataque predominante fue la izquierda con un 48,6 % seguida de la pierna derecha con un 41,4 % y para el 10 % había un equilibrio de las dos. En la final, en cambio, la pierna predominante de ataque fue la derecha con un 87,5 % (7 atletas por un 12,5 % de la izquierda (1 sola atleta. Se encontraron diferencias significativas (p = 0,018 en la media de tiempo final de los atletas masculinos según cual fuera su pierna de ataque. Conclusiones: La mayoría de los atletas atacan las vallas con derecha e izquierda en algún momento de la carrera, lo que obliga al dominio técnico bilateral. La pierna de ataque más utilizada es la izquierda, aunque en menor medida en el caso de las mujeres. Por primera vez en una gran competición, 7 de las 8 finalistas tienen la pierna derecha como pierna predominante.

  2. X-ray studies on piroxicam modifications

    International Nuclear Information System (INIS)

    Reck, G.; Bannier, G.; Hoehne, E.

    1988-01-01

    The anti-inflammatory drug piroxicam, 4-hydroxy-2-methyl-N-(2-pyridyl)2H-1,2-benzothiazine-3-car-boxamide-1,1-dioxide, crystallizes in three different forms, two anhydrates and one monohydrate. Crystal structure analyses of the monohydrate and one of the anhydrate were carried out by Bordner et al. and Kojic-Prodic et al., respectively. The results of the analysis of the third piroxicam modification and of an independently performed structure determination of the monohydrate are reported. Molecular structures and hydrogen bonding of all modifications are discussed. (author)

  3. Histone modifications in response to DNA damage

    International Nuclear Information System (INIS)

    Altaf, Mohammed; Saksouk, Nehme; Cote, Jacques

    2007-01-01

    The packaging of the eukaryotic genome into highly condensed chromatin makes it inaccessible to the factors required for gene transcription, DNA replication, recombination and repair. Eukaryotes have developed intricate mechanisms to overcome this repressive barrier imposed by chromatin. Histone modifying enzymes and ATP-dependent chromatin remodeling complexes play key roles here as they regulate many nuclear processes by altering the chromatin structure. Significantly, these activities are integral to the process of DNA repair where histone modifications act as signals and landing platforms for various repair proteins. This review summarizes the recent developments in our understanding of histone modifications and their role in the maintenance of genome integrity

  4. Chromatin proteins and modifications as drug targets

    DEFF Research Database (Denmark)

    Helin, Kristian; Dhanak, Dashyant

    2013-01-01

    A plethora of groundbreaking studies have demonstrated the importance of chromatin-associated proteins and post-translational modifications of histones, proteins and DNA (so-called epigenetic modifications) for transcriptional control and normal development. Disruption of epigenetic control...... is a frequent event in disease, and the first epigenetic-based therapies for cancer treatment have been approved. A generation of new classes of potent and specific inhibitors for several chromatin-associated proteins have shown promise in preclinical trials. Although the biology of epigenetic regulation...

  5. Modification to the lower hybrid system

    International Nuclear Information System (INIS)

    Gormezano, C.

    1989-01-01

    The main modifications which have to be done to the Lower Hybrid system are related in the change of the plasma shape in front of the grill mouth. In effect, the theoretical coupling efficiency of the LHCD grill depends only upon the density at the grill mouth and upon the launched wave index. In order to minimize the number of modifications to the launcher it is proposed to modify the length of the vacuum waveguides connecting the multijunctions to the vacuum windows. To obtain the new poloidal contour, it is proposed to recover the L1 multijunctions and to remachine their mouth. (U.K.)

  6. EG and G electron linac modifications

    International Nuclear Information System (INIS)

    Norris, N.J.; Detch, J.L.; Kocimski, S.M.; Sawyer, C.R.; Hudson, C.L.

    1986-01-01

    The electron linear accelerator at EG and G/EM, Santa Barbara Operations, installed in 1963, has been subsequently modified to produce short, intense beam pulses used in the test, calibration and development of many types of fast radiation detectors and systems. The first practical use of the single RF pulse operation, now used in many accelerators, was demonstrated on this accelerator in the late 60s. A major three-year modification, to replace obsolete equipment and bring all the subsystems up to the current state of the art, has increased the beam intensity, stability and reliability. These modifications are discussed

  7. Contraceptive technology.

    Science.gov (United States)

    Potts, M; Atkinson, L

    1984-06-01

    A question of the 1980s is how will contraceptive technology contribute to improving family planning services to meet the goal of making available a simple, safe, effective, and widely acceptable contraceptive method. Significant changes in existing technology in the 1970s resulted in safer and more effective contraceptive methods. Voluntary sterilization emerged as the primary method in developed and developing countries, as important modifications simplified the procedure for women. The tolerance and effectiveness of the IUD were improved by reducing its size, adding copper to its surface, or encapsulating progesterone within it. The steroid content of the birth control pill was reduced 10-fold, leading to fewer side effects, and the pill was found to be an effective postcoital contraceptive when taken at specific intervals. Vacuum aspiration for the termination of 1st trimester pregnancy proved to be 1 of the safest surgical techniques practiced. Belated attention is now being focused on adapting existing contraceptive methods for use during the postpartum period and breast feeding. The insertion of an IUD immediately following childbirth is a particularly useful option in the developing world as an increasing number of women have their babies in urban hospitals. A method of enhancing the contraceptive effect of breast feeding should neither change milk production nor transfer the drug to the nursing infant. Fortunately, progestin-only pills have been found to have no effect on breast milk and an attempt is being made to expand the use of this approved method. More simplification of female sterilization is needed. Current techniques require back-up facilities in case of complications and are unlikely to meet the developing world's enormous demand. 2 methods not widely used -- spermicides and periodic abstinence -- are coming under new scrutiny. In mid-1983 the US Food and Drug Administration approved a spermicide-impregnanated disposable sponge for over

  8. PSA based plant modifications and back-fits

    International Nuclear Information System (INIS)

    1997-01-01

    The mandate of Principal Working Group No. 5 - Risk Assessment states that 'The group should deal with the technology and methods for identifying contributors to risk and assessing their importance, and appropriate exchanges of information on current research'. Since being formulated in 1982, along with this mandate, the group has also endeavored to develop a common understanding of the different approaches taken in risk assessment. The focus of this report is to provide knowledge to experts on the role Probabilistic Safety Assessment (PSA) has had in safety decision making. PSA is a powerful tool for improving Nuclear Power Plant safety by identifying weaknesses in design or operation and setting priorities for plant modifications and back-fits. While the use is well recognised, it is also true that any safety decision is generally based on several elements, both probabilistic and deterministic. This document provides a general overview of insights gained from the representative set of examples collected from Member countries (Finland, France, Germany, Japan, Korea, Netherlands, Spain, Sweden, Switzerland, United Kingdom, United States). The report starts with basic types of plant modifications which were carried out (e.g. hardware or software, important or minor, etc.) and the characteristics of the PSAs used in the examples (e.g. level and scope, specific or generic, on-going or terminated, etc.). The insights gained from this small collection are then reviewed. The appendix gives a full text version of the Member country contributions

  9. Wettability Modification of Nanomaterials by Low-Energy Electron Flux

    Directory of Open Access Journals (Sweden)

    Torchinsky I

    2009-01-01

    Full Text Available Abstract Controllable modification of surface free energy and related properties (wettability, hygroscopicity, agglomeration, etc. of powders allows both understanding of fine physical mechanism acting on nanoparticle surfaces and improvement of their key characteristics in a number of nanotechnology applications. In this work, we report on the method we developed for electron-induced surface energy and modification of basic, related properties of powders of quite different physical origins such as diamond and ZnO. The applied technique has afforded gradual tuning of the surface free energy, resulting in a wide range of wettability modulation. In ZnO nanomaterial, the wettability has been strongly modified, while for the diamond particles identical electron treatment leads to a weak variation of the same property. Detailed investigation into electron-modified wettability properties has been performed by the use of capillary rise method using a few probing liquids. Basic thermodynamic approaches have been applied to calculations of components of solid–liquid interaction energy. We show that defect-free, low-energy electron treatment technique strongly varies elementary interface interactions and may be used for the development of new technology in the field of nanomaterials.

  10. Cavitation dispersion of carbon nanotubes and modification of cement systems

    Directory of Open Access Journals (Sweden)

    GUSEV Boris Vladimirovich

    2014-12-01

    Full Text Available The most common research areas in construction material science deals with the development of new efficient methods to increase strength properties of materials. One of such methods is modification of composite matrices with carbon nanotubes. The characteristics of nanomodified concretes to a great extent depend on selected method of introduction of carbon nanotubes into material. The predispersion of CNT in mixing water with plasticizing additive through ultrasound impact on the environment with colloid and other types of particles including nanoparticles is the most frequently used scientific method which provides even distribution of nanoparticles in cement. In some works the separation of agglomerated CNT in suspension was conducted by means of ultrasound treatment. The further analysis showed that the main drawbacks of ultrasound dispersion are high energy output and low performance. That causes inconvenience for application of them in manufacturing process. The methods of cavitation dispersion which were developed in the late 90ies in the XXI century today are becoming commonly used in practice. The work presents the results of dispersion of multi-layer nanotubes performed on the hydrodynamic cavitation equipment. It was determined that the use of such equipment makes it possible to produce stable and even carbon dispersions and to introduce and distribute them uniformly in concrete in the same way as in the case when ultrasound treatment is performed. The advantages of this technology are considerable decrease of energy consumption and possibility to treat enormous amounts of liquids which are necessary for modification of concrete in real production process.

  11. Microscale surface modifications for heat transfer enhancement.

    Science.gov (United States)

    Bostanci, Huseyin; Singh, Virendra; Kizito, John P; Rini, Daniel P; Seal, Sudipta; Chow, Louis C

    2013-10-09

    In this experimental study, two surface modification techniques were investigated for their effect on heat transfer enhancement. One of the methods employed the particle (grit) blasting to create microscale indentations, while the other used plasma spray coating to create microscale protrusions on Al 6061 (aluminum alloy 6061) samples. The test surfaces were characterized using scanning electron microscopy (SEM) and confocal scanning laser microscopy. Because of the surface modifications, the actual surface area was increased up to 2.8× compared to the projected base area, and the arithmetic mean roughness value (Ra) was determined to vary from 0.3 μm for the reference smooth surface to 19.5 μm for the modified surfaces. Selected samples with modified surfaces along with the reference smooth surface were then evaluated for their heat transfer performance in spray cooling tests. The cooling system had vapor-atomizing nozzles and used anhydrous ammonia as the coolant in order to achieve heat fluxes up to 500 W/cm(2) representing a thermal management setting for high power systems. Experimental results showed that the microscale surface modifications enhanced heat transfer coefficients up to 76% at 500 W/cm(2) compared to the smooth surface and demonstrated the benefits of these practical surface modification techniques to enhance two-phase heat transfer process.

  12. A Logic of Modification and Creation

    NARCIS (Netherlands)

    Renardel de Lavalette, Gerard R.

    2001-01-01

    In this paper, MCL (modification and creation logic) is presented, a variant of quantified dynamic logic (QDL) with enhanced expressivity. In MCL, functions and predicates can be modified by actions f := λx.t and p := λx.φ, respectively, and new objects can be created by the action Create. This

  13. Surface Modification Of Implants For Bone Surgery

    Directory of Open Access Journals (Sweden)

    Marciniak J.

    2015-09-01

    Full Text Available The study discusses the methods of surface modification methods for AISAI 316 L steel and Ti6Al4V ELI titanium alloy, dedicated to complex design implants used in bone surgery. Results of structural tests have been presented along with those evaluating the physicochemical properties of the formed surface layers. Clinical feasibility of the surface layers has also been evaluated.

  14. [Advances in microbial genome reduction and modification].

    Science.gov (United States)

    Wang, Jianli; Wang, Xiaoyuan

    2013-08-01

    Microbial genome reduction and modification are important strategies for constructing cellular chassis used for synthetic biology. This article summarized the essential genes and the methods to identify them in microorganisms, compared various strategies for microbial genome reduction, and analyzed the characteristics of some microorganisms with the minimized genome. This review shows the important role of genome reduction in constructing cellular chassis.

  15. 7 CFR 1467.13 - Modifications.

    Science.gov (United States)

    2010-01-01

    ... ecological and economic values to the United States. ... the program so long as the modification will not adversely affect the wetland functions and values for... of other lands that provide greater wetland functions and values at no additional cost to the...

  16. Oxidative Modification of Tryptophan-Containing Peptides

    DEFF Research Database (Denmark)

    Petersen, Jonas; Christensen, Pia Katrine; Nielsen, Mathias T

    2018-01-01

    We herein present a broadly useful method for the chemoselective modification of a wide range of tryptophan-containing peptides. Exposing a tryptophan-containing peptide to 2,3-dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) resulted in a selective cyclodehydration between the peptide backbone...

  17. Debye screening modifications in ponderomotive effects

    International Nuclear Information System (INIS)

    Sodha, M.S.; Subbarao, D.

    1979-01-01

    The effective Debye screening length is shown to be increased in the presence of a high-power electromagnetic wave. The consequent modifications in ponderomotive redistributive effects and strong violations of charge neutrality have been shown to be in agreement with recent laser-plasma experiments

  18. Cooling tower modification for intermittent operation

    International Nuclear Information System (INIS)

    Midkiff, W.S.

    1975-03-01

    One of the cooling towers at Los Alamos Scientific Laboratory is being operated intermittently. The cooling tower has been modified to restrict air flow and to keep the tower from drying out. The modifications are relatively inexpensive, simple to operate, and have proved effective. (U.S.)

  19. The Pomeranchuk theorem and its modifications

    International Nuclear Information System (INIS)

    Fischer, J.; Saly, R.

    1980-01-01

    A review of the various modifications and improvements of the Pomeranchuk theorem and also of related statements is given. The present status of the Pomeranchuk relation based on dispersion relation is discussed. Numerous problems related to the Pomeranchuk theorem and some answers to these problems are collected in a clear table

  20. Alignment modification for pencil eye shields

    International Nuclear Information System (INIS)

    Evans, M.D.; Pla, M.; Podgorsak, E.B.

    1989-01-01

    Accurate alignment of pencil beam eye shields to protect the lens of the eye may be made easier by means of a simple modification of existing apparatus. This involves drilling a small hole through the center of the shield to isolate the rayline directed to the lens and fabricating a suitable plug for this hole

  1. Protein covalent modification by biologically active quinones

    Directory of Open Access Journals (Sweden)

    MIROSLAV J. GASIC

    2004-11-01

    Full Text Available The avarone/avarol quinone/hydroquinone couple shows considerable antitumor activity. In this work, covalent modification of b-lactoglobulin by avarone and its derivatives as well as by the synthetic steroidal quinone 2,5(10-estradiene-1,4,17-trione and its derivatives were studied. The techniques for studying chemical modification of b-lactoglobulin by quinones were: UV/Vis spectrophotometry, SDS PAGE and isoelectrofocusing. SDS PAGE results suggest that polymerization of the protein occurs. It could be seen that the protein of 18 kD gives the bands of 20 kD, 36 kD, 40 kD, 45 kD, 64 kD and 128 kD depending on modification agent. The shift of the pI of the protein (5.4 upon modification toward lower values (from pI 5.0 to 5.3 indicated that lysine amino groups are the principal site of the reaction of b-lactoglobulin with the quinones.

  2. Proposal for a modification of SPICA

    International Nuclear Information System (INIS)

    Bobeldijk, C.; Goedbloed, J.P.; Griffioen, A.C.; D'Ippolito, D.A.

    1978-10-01

    Results and conclusions of recent experimental and theoretical screw-pinch research at Jutphaas are summarized. Based on these conclusions a modification of the toroidal vacuum chamber and the conducting shell of SPICA is proposed. The physics objectives of the modified experiment (SPICA II) as well as the planning are described. More detailed information can be obtained from the appendices. (Auth.)

  3. Embryonic Stem Cells and their Genetic Modification

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 13; Issue 2. Embryonic Stem Cells and their Genetic Modification - The Nobel Prize in Physiology or Medicine 2007. Mitradas M Panicker. General Article Volume 13 Issue 2 February 2008 pp 172-180 ...

  4. Histone modifications and nuclear architecture: A review

    Czech Academy of Sciences Publication Activity Database

    Bártová, Eva; Kroupová, Jana; Harničarová, Andrea; Galiová-Šustáčková, Gabriela; Kozubek, Stanislav

    2008-01-01

    Roč. 56, č. 8 (2008), s. 711-721 ISSN 0722-186X R&D Projects: GA ČR(CZ) GA204/06/0978; GA MŠk(CZ) LC535 Institutional research plan: CEZ:AV0Z50040507; CEZ:AV0Z50040702 Keywords : histones * histone modifications * nuclear architecture Subject RIV: BO - Biophysics

  5. A Suggested Modification to Maslow's Need Hierarchy

    Science.gov (United States)

    Groves, David L.; And Others

    1975-01-01

    Since its development, Maslow's need hierarchy has been criticized and applauded. This investigation was undertaken to explore a modification of the upper levels of the need hierarchy based upon the application of power, competition, and achievement to self, as well as the concept of "other directed." (Author)

  6. 14 CFR 1274.938 - Modifications.

    Science.gov (United States)

    2010-01-01

    ... Aeronautics and Space NATIONAL AERONAUTICS AND SPACE ADMINISTRATION COOPERATIVE AGREEMENTS WITH COMMERCIAL... the term of this agreement and in the interest of achieving program objectives, the parties may agree... agreement. Any changes to this agreement will be accomplished by a written bilateral modification. [End of...

  7. Albumin modification and fragmentation in renal disease.

    Science.gov (United States)

    Donadio, Carlo; Tognotti, Danika; Donadio, Elena

    2012-02-18

    Albumin is the most important antioxidant substance in plasma and performs many physiological functions. Furthermore, albumin is the major carrier of endogenous molecules and exogenous ligands. This paper reviews the importance of post-translational modifications of albumin and fragments thereof in patients with renal disease. First, current views and controversies on renal handling of proteins, mainly albumin, will be discussed. Post-translational modifications, namely the fragmentation of albumin found with proteomic techniques in nephrotic patients, diabetics, and ESRD patients will be presented and discussed. It is reasonable to hypothesize that proteolytic fragmentation of serum albumin is due to a higher susceptibility to proteases, induced by oxidative stress. The clinical relevance of the fragmentation of albumin has not yet been established. These modifications could affect some physiological functions of albumin and have a patho-physiological role in uremic syndrome. Proteomic analysis of serum allows the identification of over-expressed proteins and can detect post-translational modifications of serum proteins, hitherto hidden, using standard laboratory techniques. Copyright © 2011 Elsevier B.V. All rights reserved.

  8. Structural dynamic modification using additive damping

    Indian Academy of Sciences (India)

    elements, FEM and perturbation methods for reanalysis or structural dynamic modification ... to a system changes its mass, stiffness and damping. Thus ... due to the phase difference between stress ' and strain or 'a И E1 З iE2 for direct strain.

  9. Laser Technology.

    Science.gov (United States)

    Gauger, Robert

    1993-01-01

    Describes lasers and indicates that learning about laser technology and creating laser technology activities are among the teacher enhancement processes needed to strengthen technology education. (JOW)

  10. Roman sophisticated surface modification methods to manufacture silver counterfeited coins

    Science.gov (United States)

    Ingo, G. M.; Riccucci, C.; Faraldi, F.; Pascucci, M.; Messina, E.; Fierro, G.; Di Carlo, G.

    2017-11-01

    By means of the combined use of X-ray photoelectron spectroscopy (XPS), optical microscopy (OM) and scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDS) the surface and subsurface chemical and metallurgical features of silver counterfeited Roman Republican coins are investigated to decipher some aspects of the manufacturing methods and to evaluate the technological ability of the Roman metallurgists to produce thin silver coatings. The results demonstrate that over 2000 ago important advances in the technology of thin layer deposition on metal substrates were attained by Romans. The ancient metallurgists produced counterfeited coins by combining sophisticated micro-plating methods and tailored surface chemical modification based on the mercury-silvering process. The results reveal that Romans were able systematically to chemically and metallurgically manipulate alloys at a micro scale to produce adherent precious metal layers with a uniform thickness up to few micrometers. The results converge to reveal that the production of forgeries was aimed firstly to save expensive metals as much as possible allowing profitable large-scale production at a lower cost. The driving forces could have been a lack of precious metals, an unexpected need to circulate coins for trade and/or a combinations of social, political and economic factors that requested a change in money supply. Finally, some information on corrosion products have been achieved useful to select materials and methods for the conservation of these important witnesses of technology and economy.

  11. Direct modification of silicon surface by nanosecond laser interference lithography

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Dapeng [JR3CN and CNM (Changchun University of Science and Technology), Changchun 130022 (China); JR3CN and IRAC (University of Bedfordshire), Luton LU1 3JU (United Kingdom); Wang, Zuobin, E-mail: wangz@cust.edu.cn [JR3CN and CNM (Changchun University of Science and Technology), Changchun 130022 (China); JR3CN and IRAC (University of Bedfordshire), Luton LU1 3JU (United Kingdom); Zhang, Ziang [JR3CN and CNM (Changchun University of Science and Technology), Changchun 130022 (China); Yue, Yong [JR3CN and CNM (Changchun University of Science and Technology), Changchun 130022 (China); JR3CN and IRAC (University of Bedfordshire), Luton LU1 3JU (United Kingdom); Li, Dayou [JR3CN and IRAC (University of Bedfordshire), Luton LU1 3JU (United Kingdom); Maple, Carsten [JR3CN and CNM (Changchun University of Science and Technology), Changchun 130022 (China); JR3CN and IRAC (University of Bedfordshire), Luton LU1 3JU (United Kingdom)

    2013-10-01

    Periodic and quasi-periodic structures on silicon surface have numerous significant applications in photoelectronics and surface engineering. A number of technologies have been developed to fabricate the structures in various research fields. In this work, we take the strategy of direct nanosecond laser interference lithography technology, and focus on the silicon material to create different well-defined surface structures based on theoretical analysis of the formation of laser interference patterns. Two, three and four-beam laser interference systems were set up to fabricate the grating, regular triangle and square structures on silicon surfaces, respectively. From the AFM micrographs, the critical features of structures have a dependence on laser fluences. For a relative low laser fluence, grating and dot structures formed with bumps due to the Marangoni Effect. With the increase of laser fluences, melt and evaporation behaviors can be responsible for the laser modification. By properly selecting the process parameters, well-defined grating and dot structures can been achieved. It can be demonstrated that direct laser interference lithography is a facile and efficient technology with the advantage of a single process procedure over macroscale areas for the fabrication of micro and nano structures.

  12. Modification of enzymes by use of high-pressure homogenization.

    Science.gov (United States)

    Dos Santos Aguilar, Jessika Gonçalves; Cristianini, Marcelo; Sato, Helia Harumi

    2018-07-01

    High-pressure is an emerging and relatively new technology that can modify various molecules. High-pressure homogenization (HPH) has been used in several studies on protein modification, especially in enzymes used or found in food, from animal, plant or microbial resources. According to the literature, the enzymatic activity can be modulated under pressure causing inactivation, stabilization or activation of the enzymes, which, depending on the point of view could be very useful. Homogenization can generate changes in the structure of the enzyme modifying various chemical bonds (mainly weak bonds) causing different denaturation levels and, consequently, affecting the catalytic activity. This review aims to describe the various alterations due to HPH treatment in enzymes, to show the influence of high-pressure on proteins and to report the HPH effects on the enzymatic activity of different enzymes employed in the food industry and research. Copyright © 2018 Elsevier Ltd. All rights reserved.

  13. Methods for genetic modification of megakaryocytes and platelets.

    Science.gov (United States)

    Pendaries, Caroline; Watson, Stephen P; Spalton, Jennifer C

    2007-09-01

    During recent decades there have been major advances in the fields of thrombosis and haemostasis, in part through development of powerful molecular and genetic technologies. Nevertheless, genetic modification of megakaryocytes and generation of mutant platelets in vitro remains a highly specialized area of research. Developments are hampered by the low frequency of megakaryocytes and their progenitors, a poor efficiency of transfection and a lack of understanding with regard to the mechanism by which megakaryocytes release platelets. Current methods used in the generation of genetically modified megakaryocytes and platelets include mutant mouse models, cell line studies and use of viruses to transform primary megakaryocytes or haematopoietic precursor cells. This review summarizes the advantages, limitations and technical challenges of such methods, with a particular focus on recent successes and advances in this rapidly progressing field including the potential for use in gene therapy for treatment of patients with platelet disorders.

  14. Biopolymer system for permeability modification in porous media

    Energy Technology Data Exchange (ETDEWEB)

    Stepp, A.K.; Bryant, R.S.; Llave, F.M. [BMD-Oklahoma, Inc., Bartlesville, OK (United States)] [and others

    1995-12-31

    New technologies are needed to reduce the current high rate of well abandonment. Improved sweep efficiency, reservoir conformance, and permeability modification can have a significant impact on oil recovery processes. Microorganisms can be used to selectively plug high-permeability zones to improve sweep efficiency and impart conformance control. Studies of a promising microbial system for polymer production were conducted to evaluate reservoir conditions in which this system would be effective. Factors which can affect microbial growth and polymer production include salinity, pH, temperature, divalent ions, presence of residual oil, and rock matrix. Flask tests and coreflooding experiments were conducted to optimize and evaluate the effectiveness of this system. Nuclear magnetic resonance imaging (NMRI) was used to visualize microbial polymer production in porous media. Changes in fluid distribution within the pore system of the core were detected.

  15. Directly thiolated modification onto the surface of detonation nanodiamonds.

    Science.gov (United States)

    Hsu, Ming-Hua; Chuang, Hong; Cheng, Fong-Yu; Huang, Ying-Pei; Han, Chien-Chung; Chen, Jiun-Yu; Huang, Su-Chin; Chen, Jen-Kun; Wu, Dian-Syue; Chu, Hsueh-Liang; Chang, Chia-Ching

    2014-05-28

    An efficient method for modifying the surface of detonation nanodiamonds (5 and 100 nm) with thiol groups (-SH) by using an organic chemistry strategy is presented herein. Thiolated nanodiamonds were characterized by spectroscopic techniques, and the atomic percentage of sulfur was analyzed by elemental analysis and X-ray photoelectron spectroscopy. The conjugation between thiolated nanodiamonds and gold nanoparticles was elucidated by transmission electron microscopy and UV-vis spectrometry. Moreover, the material did not show significant cytotoxicity to the human lung carcinoma cell line and may prospectively be applied in bioconjugated technology. The new method that we elucidated may significantly improve the approach to surface modification of detonation nanodiamonds and build up a new platform for the application of nanodiamonds.

  16. Vacuum-based surface modification of organic and metallic substrates

    Science.gov (United States)

    Torres, Jessica

    Surface physico-chemical properties play an important role in the development and performance of materials in different applications. Consequently, understanding the chemical and physical processes involved during surface modification strategies is of great scientific and technological importance. This dissertation presents results from the surface modification of polymers, organic films and metallic substrates with reactive species, with the intent of simulating important modification processes and elucidating surface property changes of materials under different environments. The reactions of thermally evaporated copper and titanium with halogenated polytetrafluoroethylene (PTFE) and polyvinyl chloride (PVC) are used to contrast the interaction of metals with polymers. Results indicate that reactive metallization is thermodynamically favored when the metal-halogen bond strength is greater than the carbon-halogen bond strength. X-ray post-metallization treatment results in an increase in metal-halide bond formation due to the production of volatile halogen species in the polymer that react with the metallic overlayer. The reactions of atomic oxygen (AO) and atomic chlorine with polyethylene (PE) and self-assembled monolayers (SAMs) films were followed to ascertain the role of radical species during plasma-induced polymer surface modification. The reactions of AO with X-ray modified SAMs are initially the dominated by the incorporation of new oxygen containing functionality at the vacuum/film interface, leading to the production of volatile carbon containing species such as CO2 that erodes the hydrocarbon film. The reaction of atomic chlorine species with hydrocarbon SAMs, reveals that chlorination introduces C-Cl and C-Cl2 functionalities without erosion. A comparison of the reactions of AO and atomic chlorine with PE reveal a maximum incorporation of the corresponding C-O and C-Cl functionalities at the polymer surface. A novel method to prepare phosphorous

  17. Effects of surface atomistic modification on mechanical properties of gold nanowires

    International Nuclear Information System (INIS)

    Sun, Xiao-Yu; Xu, Yuanjie; Wang, Gang-Feng; Gu, Yuantong; Feng, Xi-Qiao

    2015-01-01

    Highlights: • Molecular dynamics simulations of surface modification effect of Au nanowires. • Surface modification can greatly affect the mechanical properties of nanowires. • Core–shell model is used to elucidate the effect of residual surface stress. - Abstract: Modulation of the physical and mechanical properties of nanowires is a challenging issue for their technological applications. In this paper, we investigate the effects of surface modification on the mechanical properties of gold nanowires by performing molecular dynamics simulations. It is found that by modifying a small density of silver atoms to the surface of a gold nanowire, the residual surface stress state can be altered, rendering a great improvement of its plastic yield strength. This finding is in good agreement with experimental measurements. The underlying physical mechanisms are analyzed by a core–shell nanowire model. The results are helpful for the design and optimization of advanced nanomaterial with superior mechanical properties

  18. Pulsed electric field-assisted modification of pectin from sugar beet pulp.

    Science.gov (United States)

    Ma, Sen; Wang, Zhong-he

    2013-02-15

    This current work is concerned with the modification of sugar beet pulp (SBP) pectin assisted by pulsed electric filed (PEF) without solvent. Pectin-arachates with degree of esterification (DE) ranging from 49 to 84 were prepared in one-step modification. The results showed that the DE of pectin derivatives increased significantly with the PEF intensity from 18 to 30 kV cm((1) and total specific energy input from 124 to 345 J mL((1). Evidence of modification of pectin was provided by FT-IR, X-ray diffraction patterns and NMR spectra. Thermogravimetric investigation of modified pectin indicated a higher thermal stability than the untreated one. Results revealed that PEF technology is a promising method for industrial manufacture of pectin derivatives. Copyright © 2012 Elsevier Ltd. All rights reserved.

  19. Optimization of Squeeze Parameters and Modification of AlSi7Mg Alloy

    Directory of Open Access Journals (Sweden)

    Zyska A.

    2013-06-01

    Full Text Available The paper present the examination results concerning mechanical properties of castings made of AlSi7MG alloy in correlation both with the most significant squeeze casting parameters and with the modification treatment. Experiments were planned and held according to the 23 factorial design. The regression equations describing the influence of the squeeze pressure, the mould temperature, and the quantity of strontium modifier on the strength and elongation of the examined alloy were obtained. It was found that the main factor controlling the strength increase is the squeeze pressure, while the plasticity (A5 of the alloy is affected most advantageously by modification. The application of modification treatment in squeeze casting technology enables for production of the slab-type castings made of AlSi7Mg alloy exhibiting strength at the level of 230 MPa and elongation exceeding 14%.

  20. The interplay of post-translational modification and gene therapy

    Directory of Open Access Journals (Sweden)

    Osamor VC

    2016-02-01

    Full Text Available Victor Chukwudi Osamor,1–3 Shalom N Chinedu,3,4 Dominic E Azuh,3,5 Emeka Joshua Iweala,3,4 Olubanke Olujoke Ogunlana3,4 1Covenant University Bioinformatics Research (CUBRe Unit, Department of Computer and Information Sciences, College of Science and Technology (CST, Covenant University, Ota, Ogun State, Nigeria; 2Institute of Informatics (Computational biology and Bioinformatics, Faculty of Mathematics, Informatics and Mechanics, University of Warsaw (Uniwersytet Warszawski, Warszawa, Poland; 3Covenant University Public Health and Well-being Research Group (CUPHWERG, Covenant University, 4Biochemistry and Molecular Biology Unit, Department of Biological Sciences, College of Science and Technology, Covenant University, Canaan Land, 5Department of Economics and Development Studies, Covenant University, Ota, Ogun State, Nigeria Abstract: Several proteins interact either to activate or repress the expression of other genes during transcription. Based on the impact of these activities, the proteins can be classified into readers, modifier writers, and modifier erasers depending on whether histone marks are read, added, or removed, respectively, from a specific amino acid. Transcription is controlled by dynamic epigenetic marks with serious health implications in certain complex diseases, whose understanding may be useful in gene therapy. This work highlights traditional and current advances in post-translational modifications with relevance to gene therapy delivery. We report that enhanced understanding of epigenetic machinery provides clues to functional implication of certain genes/gene products and may facilitate transition toward revision of our clinical treatment procedure with effective fortification of gene therapy delivery. Keywords: post-translational modification, gene therapy, epigenetics, histone, methylation

  1. Experimental Study on Modification of Concrete with Asphalt Admixture

    Science.gov (United States)

    Bołtryk, Michał; Małaszkiewicz, Dorota; Pawluczuk, Edyta

    2017-10-01

    Durability of engineering structures made of cement concrete with high compressive strength is a very vital issue, especially when they are exposed to different aggressive environments and dynamic loads. Concrete resistance to weathering actions and chemical attack can be improved by combined chemical and mechanical modification of concrete microstructure. Asphalt admixture in the form of asphalt paste (AP) was used for chemical modification of cement composite microstructure. Concrete structure was formed using special technology of compaction. A stand for vibro-vibropressing with regulated vibrator force and pressing force was developed. The following properties of the modified concrete were tested: compressive strength, water absorption, freeze-thaw resistance, scaling resistance in the presence of de-icing agents, chloride migration, resistance to CO2 and corrosion in aggressive solutions. Corrosion resistance was tested alternately in 1.8% solutions of NH4Cl, MgSO4, (NH2)2CO and CaCl2, which were altered every 7 days; the experiment lasted 9.5 months. Optimum compaction parameters in semi-industrial conditions were determined: ratio between piston stress (Qp ) and external top vibrator force (Po ) in the range 0.4÷-0.5 external top vibrator force 4 kN. High strength concretes with compressive strength fcm = 60÷70 MPa, very low water absorption (barrier formed in pores of cement hydrates against dioxide and chloride ions. Concrete specimens containing AP 4% c.m. and consolidated by vibro-vibropressing method proved to be practically resistant to highly corrosive environment. Vibro-vibropressing compaction technology of concrete modified with AP can be applied in prefabrication plants to produce elements for road, bridge and hydraulic engineering constructions.

  2. Mobile Phone Cognitive Bias Modification Research Platform for Substance Use Disorders: Protocol for a Feasibility Study.

    Science.gov (United States)

    Zhang, Melvyn; Ying, JiangBo; Song, Guo; Fung, Daniel Ss; Smith, Helen

    2018-06-12

    Cognitive biases refer to automatic attentional and interpretational tendencies, which could be retained by cognitive bias modification interventions. Cristea et al and Jones et al have published reviews (in 2016 and 2017 respectively) on the effectiveness of such interventions. The advancement of technologies such as electronic health (eHealth) and mobile health (mHealth) has led to them being harnessed for the delivery of cognitive bias modification. To date, at least eight studies have demonstrated the feasibility of mobile technologies for the delivery of cognitive bias modification. Most of the studies are limited to a description of the conventional cognitive bias modification methodology that has been adopted. None of the studies shared the developmental process for the methodology involved, such that future studies could adopt it in the cost-effective replication of such interventions. It is important to have a common platform that could facilitate the design and customization of cognitive bias modification interventions for a variety of psychiatric and addictive disorders. It is the aim of the current research protocol to describe the design of a research platform that allows for customization of cognitive bias modification interventions for addictive disorders. A multidisciplinary team of 2 addiction psychiatrists, a psychologist with expertise in cognitive bias modification, and a computer engineer, were involved in the development of the intervention. The proposed platform would comprise of a mobile phone version of the cognitive bias task which is controlled by a server that could customize the algorithm for the tasks and collate the reaction-time data in realtime. The server would also allow the researcher to program the specific set of images that will be present in the task. The mobile phone app would synchronize with the backend server in real-time. An open-sourced cross-platform gaming software from React Native was used in the current development

  3. 30 CFR 18.81 - Field modification of approved (permissible) equipment; application for approval of modification...

    Science.gov (United States)

    2010-07-01

    ... TESTING, EVALUATION, AND APPROVAL OF MINING PRODUCTS ELECTRIC MOTOR-DRIVEN MINE EQUIPMENT AND ACCESSORIES... having jurisdiction at the mine where such equipment is to be operated stating the modifications which...

  4. Antibiotic Modification of Native Grafts: Improving upon nature's scaffolds

    Science.gov (United States)

    Ketonis, Constantinos

    The use of allograft bone in orthopaedics, spine surgery and dentistry is invaluable for helping restore bone defects and promote osteointegration. However, one, and perhaps the most important, problem associated with the use of allograft is infection. It is a devastating complication for patients and physicians alike, and necessitates repeated surgeries, extended treatment and often times results in increased morbidity and poor outcomes. Previous attempts to incorporate antibiotics into allograft by soaking the graft in antibiotic solution have enjoyed limited success in providing adequate protection against bacterial colonization. To overcome problems associated with controlled release systems, I have described a novel chemical modification that allows for the attachment of vancomycin, or other antibiotics, to free amines of allograft bone thus rendering the graft bactericidal over a long time period. This modification, as evaluated by immunohistochemistry, allowed for the uniform and stable attachment of antibiotics to allograft without adversely affecting its potential for incorporation with bone. Modified allograft, placed in the presence of S. aureus, did not allow colonization by bacteria as evaluated by fluorescent imaging, scanning microscopy, and direct bacterial counts. More importantly, inhibition of bacterial colonization resulted in prevention of biofilm formation. Furthermore, I show that the spectrum of activity of the parent antibiotic was maintained, as the construct was not active against E. coli challenges. Comparison of this technology with simple antibiotic incorporation demonstrated that the covalently-coupled antibiotic did not elute from the bone, but rather remained attached and active on the surface for times out to one year, times that are far longer than currently can be achieved with the elution technologies. Despite its potent activity against bacteria, modified bone remained biocompatible allowing attachment of osteoblastic

  5. Assessment of modification level of hypoeutectic Al -Si alloys by pattern recognition of cooling curves

    Directory of Open Access Journals (Sweden)

    CHEN Xiang

    2005-11-01

    Full Text Available Most evaluations of modification level are done according to a specific scale based on an merican Foundry Society (AFS standard wall chart as qualitative analysis in Al-Si casting production currently. This method is quite dependent on human experience when making comparisons of the microstructure with the standard chart. And the structures depicted in the AFS chart do not always resemble those seen in actual Al-Si castings. Therefore, this ualitativeanalysis procedure is subjective and can introduce human-caused errors into comparative metallographic analyses. A quantization parameter of the modification level was introduced by setting up the relationship between mean area weighted shape factor of eutectic silicon phase and the modification level using image analysis technology. In order to evaluate the modification level, a new method called "intelligent evaluating of melt quality by pattern recognition of hermal analysis cooling curves" has also been introduced. The results show that silicon modification level can be precisely assessed by comparison of the cooling curve of the melt to be evaluated with the one most similar to it in a database.

  6. A CRISPR New World: Attitudes in the Public toward Innovations in Human Genetic Modification.

    Science.gov (United States)

    Weisberg, Steven M; Badgio, Daniel; Chatterjee, Anjan

    2017-01-01

    The potential to genetically modify human germlines has reached a critical tipping point with recent applications of CRISPR-Cas9. Even as researchers, clinicians, and ethicists weigh the scientific and ethical repercussions of these advances, we know virtually nothing about public attitudes on the topic. Understanding such attitudes will be critical to determining the degree of broad support there might be for any public policy or regulation developed for genetic modification research. To fill this gap, we gave an online survey to a large (2,493 subjects) and diverse sample of Americans. Respondents supported genetic modification research, although demographic variables influenced these attitudes-conservatives, women, African-Americans, and older respondents, while supportive, were more cautious than liberals, men, other ethnicities, and younger respondents. Support was also was slightly muted when the risks (unanticipated mutations and possibility of eugenics) were made explicit. The information about genetic modification was also presented as contrasting vignettes, using one of five frames: genetic editing, engineering, hacking, modification, or surgery. Despite the fact that the media and academic use of frames describing the technology varies, these frames did not influence people's attitudes. These data contribute a current snapshot of public attitudes to inform policy with regard to human genetic modification.

  7. A CRISPR New World: Attitudes in the Public toward Innovations in Human Genetic Modification

    Directory of Open Access Journals (Sweden)

    Steven M. Weisberg

    2017-05-01

    Full Text Available The potential to genetically modify human germlines has reached a critical tipping point with recent applications of CRISPR-Cas9. Even as researchers, clinicians, and ethicists weigh the scientific and ethical repercussions of these advances, we know virtually nothing about public attitudes on the topic. Understanding such attitudes will be critical to determining the degree of broad support there might be for any public policy or regulation developed for genetic modification research. To fill this gap, we gave an online survey to a large (2,493 subjects and diverse sample of Americans. Respondents supported genetic modification research, although demographic variables influenced these attitudes—conservatives, women, African-Americans, and older respondents, while supportive, were more cautious than liberals, men, other ethnicities, and younger respondents. Support was also was slightly muted when the risks (unanticipated mutations and possibility of eugenics were made explicit. The information about genetic modification was also presented as contrasting vignettes, using one of five frames: genetic editing, engineering, hacking, modification, or surgery. Despite the fact that the media and academic use of frames describing the technology varies, these frames did not influence people’s attitudes. These data contribute a current snapshot of public attitudes to inform policy with regard to human genetic modification.

  8. Enhancing the functional properties of thermophilic enzymes by chemical modification and immobilization.

    Science.gov (United States)

    Cowan, Don A; Fernandez-Lafuente, Roberto

    2011-09-10

    The immobilization of proteins (mostly typically enzymes) onto solid supports is mature technology and has been used successfully to enhance biocatalytic processes in a wide range of industrial applications. However, continued developments in immobilization technology have led to more sophisticated and specialized applications of the process. A combination of targeted chemistries, for both the support and the protein, sometimes in combination with additional chemical and/or genetic engineering, has led to the development of methods for the modification of protein functional properties, for enhancing protein stability and for the recovery of specific proteins from complex mixtures. In particular, the development of effective methods for immobilizing large multi-subunit proteins with multiple covalent linkages (multi-point immobilization) has been effective in stabilizing proteins where subunit dissociation is the initial step in enzyme inactivation. In some instances, multiple benefits are achievable in a single process. Here we comprehensively review the literature pertaining to immobilization and chemical modification of different enzyme classes from thermophiles, with emphasis on the chemistries involved and their implications for modification of the enzyme functional properties. We also highlight the potential for synergies in the combined use of immobilization and other chemical modifications. Copyright © 2011 Elsevier Inc. All rights reserved.

  9. Diagonal chromatography to study plant protein modifications.

    Science.gov (United States)

    Walton, Alan; Tsiatsiani, Liana; Jacques, Silke; Stes, Elisabeth; Messens, Joris; Van Breusegem, Frank; Goormachtig, Sofie; Gevaert, Kris

    2016-08-01

    An interesting asset of diagonal chromatography, which we have introduced for contemporary proteome research, is its high versatility concerning proteomic applications. Indeed, the peptide modification or sorting step that is required between consecutive peptide separations can easily be altered and thereby allows for the enrichment of specific, though different types of peptides. Here, we focus on the application of diagonal chromatography for the study of modifications of plant proteins. In particular, we show how diagonal chromatography allows for studying proteins processed by proteases, protein ubiquitination, and the oxidation of protein-bound methionines. We discuss the actual sorting steps needed for each of these applications and the obtained results. This article is part of a Special Issue entitled: Plant Proteomics--a bridge between fundamental processes and crop production, edited by Dr. Hans-Peter Mock. Copyright © 2016 Elsevier B.V. All rights reserved.

  10. Adaptive Control with Reference Model Modification

    Science.gov (United States)

    Stepanyan, Vahram; Krishnakumar, Kalmanje

    2012-01-01

    This paper presents a modification of the conventional model reference adaptive control (MRAC) architecture in order to improve transient performance of the input and output signals of uncertain systems. A simple modification of the reference model is proposed by feeding back the tracking error signal. It is shown that the proposed approach guarantees tracking of the given reference command and the reference control signal (one that would be designed if the system were known) not only asymptotically but also in transient. Moreover, it prevents generation of high frequency oscillations, which are unavoidable in conventional MRAC systems for large adaptation rates. The provided design guideline makes it possible to track a reference commands of any magnitude from any initial position without re-tuning. The benefits of the method are demonstrated with a simulation example

  11. Chitosan Modification and Pharmaceutical/Biomedical Applications

    Directory of Open Access Journals (Sweden)

    Jiali Zhang

    2010-06-01

    Full Text Available Chitosan has received much attention as a functional biopolymer for diverse applications, especially in pharmaceutics and medicine. Our recent efforts focused on the chemical and biological modification of chitosan in order to increase its solubility in aqueous solutions and absorbability in the in vivo system, thus for a better use of chitosan. This review summarizes chitosan modification and its pharmaceutical/biomedical applications based on our achievements as well as the domestic and overseas developments: (1 enzymatic preparation of low molecular weight chitosans/chitooligosaccharides with their hypocholesterolemic and immuno-modulating effects; (2 the effects of chitin, chitosan and their derivatives on blood hemostasis; and (3 synthesis of a non-toxic ion ligand—D-Glucosaminic acid from Oxidation of D-Glucosamine for cancer and diabetes therapy.

  12. Chemical modifications and reactions in DNA nanostructures

    DEFF Research Database (Denmark)

    Gothelf, Kurt Vesterager

    2017-01-01

    such as hydrocarbons or steroids have been introduced to change the surface properties of DNA origami structures, either to protect the DNA nanostructure or to dock it into membranes and other hydrophobic surfaces. DNA nanostructures have also been used to control covalent chemical reactions. This article provides......DNA nanotechnology has the power to form self-assembled and well-defined nanostructures, such as DNA origami, where the relative positions of each atom are known with subnanometer precision. Our ability to synthesize oligonucleotides with chemical modifications in almost any desired position...... provides rich opportunity to incorporate molecules, biomolecules, and a variety of nanomaterials in specific positions on DNA nanostructures. Several standard modifications for oligonucleotides are available commercially, such as dyes, biotin, and chemical handles, and such modified oligonucleotides can...

  13. Modification of plastic by ionizing radiation

    International Nuclear Information System (INIS)

    Dalager, P.

    1974-01-01

    Very few of the modifications of plastic materials have got industrial status. Nearly all of the succesful industrial irradiations processes are performed with polyethylene. Irradiated polyethylene has been used in industries and products such as wire, cables, foams and heat shrinkable products, i.e. films, tubings and molded parts. Also the irradiation of finished products, i.e. improvement on a thermoplastic material into thermosetting material, has been developed in this field. (M.S.)

  14. Tipping the balance by manipulating posttranslational modifications

    Science.gov (United States)

    Broberg, Christopher A.; Orth, Kim

    2010-01-01

    Summary Bacteria use a variety of mechanisms during infection to ensure their survival including the delivery of virulence factors via a type III secretion system into the infected cell. The factors exhibit diverse activities that in many cases mimic eukaryotic mechanisms used by the host to defend against infection. Herein we describe a class of effectors that use posttranslational modifications, some reversible and others irreversible, to manipulate host signaling systems to subvert the host response. PMID:20071215

  15. Screening vector field modifications of general relativity

    International Nuclear Information System (INIS)

    Beltrán Jiménez, Jose; Delvas Fróes, André Luís; Mota, David F.

    2013-01-01

    A screening mechanism for conformal vector–tensor modifications of general relativity is proposed. The conformal factor depends on the norm of the vector field and makes the field to vanish in high dense regions, whereas drives it to a non-null value in low density environments. Such process occurs due to a spontaneous symmetry breaking mechanism and gives rise to both the screening of fifth forces as well as Lorentz violations. The cosmology and local constraints are also computed

  16. The experimental modification of sonorous breathing.

    OpenAIRE

    Josephson, S C; Rosen, R C

    1980-01-01

    Loud snoring is a noxious habit and potential personal health risk. We are reporting the first experimental study of simple behavioral techniques for the modification of chronic snoring. Twenty-four volunteers participated in a repeated measures, randomized group design over 2 weeks of intervention and one-month follow-up. Treatment groups included a contingent-awakening and breathing retraining (self-control) condition. Both treatment groups were compared to a no-treatment control. Despite c...

  17. Dietary modification of human macular pigment density.

    Science.gov (United States)

    Hammond, B R; Johnson, E J; Russell, R M; Krinsky, N I; Yeum, K J; Edwards, R B; Snodderly, D M

    1997-08-01

    The retinal carotenoids lutein (L) and zeaxanthin (Z) that form the macular pigment (MP) may help to prevent neovascular age-related macular degeneration. The purpose of this study was to determine whether MP density in the retina could be raised by increasing dietary intake of L and Z from foods. Macular pigment was measured psychophysically for 13 subjects. Serum concentrations of L, Z, and beta-carotene were measured by high-performance liquid chromatography. Eleven subjects modified their usual daily diets by adding 60 g of spinach (10.8 mg L, 0.3 mg Z, 5 mg beta-carotene) and ten also added 150 g of corn (0.3 mg Z, 0.4 mg L); two other subjects were given only corn. Dietary modification lasted up to 15 weeks. For the subjects fed spinach or spinach and corn, three types of responses to dietary modification were identified: Eight "retinal responders" had increases in serum L (mean, 33%; SD, 22%) and in MP density (mean, 19%; SD, 11%); two "retinal nonresponders" showed substantial increases in serum L (mean, 31%) but not in MP density (mean, -11%); one "serum and retinal nonresponder" showed no changes in serum L, Z, or beta-carotene and no change in MP density. For the two subjects given only corn, serum L changed little (+11%, -6%), but in one subject serum Z increased (70%) and MP density increased (25%). Increases in MP density were obtained within 4 weeks of dietary modification for most, but not all, subjects. When MP density increased with dietary modification, it remained elevated for at least several months after resuming an unmodified diet. Augmentation of MP for both experimental and clinical investigation appears to be feasible for many persons.

  18. Repair-modification of radiodamaged genes

    International Nuclear Information System (INIS)

    Volpe, P.; Institute of Experimental Medicine, Rome; Eremenko, T.

    1995-01-01

    It is proposed that through repair-modification, the modified base 5mC may have facilitated the divergent evolution of coding (hypomethylated exon) and uncoding (hypermethylated promoter and intron) sequences in eukaryotic genes. The radioinduced repair patches appearing in regions lacking 5mC are fully reconstructed by excision-repair, whereas those appearing in regions containing 5mC are incompletely reconstructed by this conventional mechanism. Such a second class of repair patches may, however, become fully reconstructed, in the S phase, by repair-modification. In fact, while DNA polymerase β - which is a key enzyme of excision-repair - is active through the whole interphase. DNA methylase - which is responsible for post-synthetic DNA modification - is essentially active in S. Uncoupling of these two enzyme systems, outside S, might explain why in unsynchronised cells repair patches of non-replicating strands are hypomethylated when compared with specific methylation of replicating strands. In other words, excision-repair would always be able to re-establish the primary ATGC language of both damaged unmethylated and methylated regions, while repair-modification would be able to re-establish the modified ATGC(5mC) language of the damaged methylated regions, only in S, but not in G 1 or G 2 . In these two phases, when DNA methylation is inversely correlated with pre-mRNA transcription (as in the case of many tissue-specific genes), such demethylation might induce a silent transcriptional unit to become active. (Author)

  19. Surface Modification of Mg and Mg Alloys

    OpenAIRE

    Turhan, Can Metehan

    2012-01-01

    Progressively, the well explored and studied mechanical properties of a bulk metal are compared with the corrosion behaviour obtained from its surface, which enables promising improvements in desired applications. An example is magnesium metal: where, by developing new types of surface modifications by understanding its inconsistent corrosion behaviour, it would be possible to apply this engineering metal safely as a biocompatible metal, in addition to its widely used application areas such a...

  20. Modifications to the control program HASP

    International Nuclear Information System (INIS)

    Bartoli, M.; Dall'Olio, L.; Mareso, T.; Ricci, F.

    1973-01-01

    Modification to HASP version 3, level 0, a control program for an electronic computer, was described with the purpose of solving some operative and managing problems not solved by the standard version for the IBM 360/75 computer. The application and utilization of these facilities require a deep knowledge of the HASP II design, version 3, level 0, 360D-05.1.014

  1. The modification of the Rossendorf Research Reactor

    International Nuclear Information System (INIS)

    Gehre, G.; Hieronymus, W.; Kampf, T.; Ringel, V.; Robbander, W.

    1990-01-01

    The Rossendorf Research Reactor is of the WWR-SM type. It is a heterogeneous water moderated and cooled tank reactor with a thermal power of 10 MW, which was in operation from 1957 to 1986. It was shut down in 1987 for comprehensive modifications to increase its safety and to improve the efficiency of irradiation and experimentals. The modifications will be implemented in two steps. The first one to be finished in 1989 comprises: 1) the replacement of the reactor tank and its components, the reactor cooling system, the ventilation system and the electric power installation; 2) the construction of a new reactor control room and of filtering equipment; 3) the renewal of process instrumentation and control engineering equipment for reactor operation, equipment for radiation protection monitoring, and reactor operation and safety documentation. The second step, to be implemented in the nineties, is to comprise: 1) the enlargement of the capacity for storage of spent fuel; 2) the modernization of reactor operations by computer-aided control; 3) the installation of an automated measuring systems for accident and environmental monitoring. Two objects of the modification, the replacement of the reactor tank and the design of a new and safer one as well as the increase of the redundancy of the core emergency cooling system are described in detail. For the tank replacement the exposure data are also given. Furthermore, the licensing procedures based on national ordinances and standards as well as on international standards and recommendations and the mutual responsibilities and activities of the licensing authority and of the reactor manager are presented. Finally, the present state of the modifications and the schedule up to the reactor recommissioning and test operation at full power is outlined

  2. Do multiple body modifications alter pain threshold?

    Science.gov (United States)

    Yamamotová, A; Hrabák, P; Hříbek, P; Rokyta, R

    2017-12-30

    In recent years, epidemiological data has shown an increasing number of young people who deliberately self-injure. There have also been parallel increases in the number of people with tattoos and those who voluntarily undergo painful procedures associated with piercing, scarification, and tattooing. People with self-injury behaviors often say that they do not feel the pain. However, there is no information regarding pain perception in those that visit tattoo parlors and piercing studios compared to those who don't. The aim of this study was to compare nociceptive sensitivity in four groups of subjects (n=105, mean age 26 years, 48 women and 57 men) with different motivations to experience pain (i.e., with and without multiple body modifications) in two different situations; (1) in controlled, emotionally neutral conditions, and (2) at a "Hell Party" (HP), an event organized by a piercing and tattoo parlor, with a main event featuring a public demonstration of painful techniques (burn scars, hanging on hooks, etc.). Pain thresholds of the fingers of the hand were measured using a thermal stimulator and mechanical algometer. In HP participants, information about alcohol intake, self-harming behavior, and psychiatric history were used in the analysis as intervening variables. Individuals with body modifications as well as without body modifications had higher thermal pain thresholds at Hell Party, compared to thresholds measured at control neutral conditions. No such differences were found relative to mechanical pain thresholds. Increased pain threshold in all HP participants, irrespectively of body modification, cannot be simply explained by a decrease in the sensory component of pain; instead, we found that the environment significantly influenced the cognitive and affective component of pain.

  3. Magnetic field modification of optical magnetic dipoles.

    Science.gov (United States)

    Armelles, Gaspar; Caballero, Blanca; Cebollada, Alfonso; Garcia-Martin, Antonio; Meneses-Rodríguez, David

    2015-03-11

    Acting on optical magnetic dipoles opens novel routes to govern light-matter interaction. We demonstrate magnetic field modification of the magnetic dipolar moment characteristic of resonant nanoholes in thin magnetoplasmonic films. This is experimentally shown through the demonstration of the magneto-optical analogue of Babinet's principle, where mirror imaged MO spectral dependencies are obtained for two complementary magnetoplasmonic systems: holes in a perforated metallic layer and a layer of disks on a substrate.

  4. Turbine imaging technology assessment

    Energy Technology Data Exchange (ETDEWEB)

    Moursund, R. A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Carlson, T. J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2004-12-01

    The goal of this project was to identify and evaluate imaging technologies for observing juvenile fish within a Kaplan turbine, and specifically that would enable scientists to determine mechanisms of fish injury within an operating turbine unit. This report documents the opportunities and constraints for observing juvenile fish at specific locations during turbine passage. These observations were used to make modifications to dam structures and operations to improve conditions for fish passage while maintaining or improving hydropower production. The physical and hydraulic environment that fish experience as they pass through the hydroelectric plants were studied and the regions with the greatest potential for injury were defined. Biological response data were also studied to determine the probable types of injuries sustained in the turbine intake and what types of injuries are detectable with imaging technologies. The study grouped injury-causing mechanisms into two categories: fluid (pressure/cavitation, shear, turbulence) and mechanical (strike/collision, grinding/pinching, scraping). The physical constraints of the environment, together with the likely types of injuries to fish, provided the parameters needed for a rigorous imaging technology evaluation. Types of technology evaluated included both tracking and imaging systems using acoustic technologies (such as sonar and acoustic tags) and optic technologies (such as pulsed-laser videography, which is high-speed videography using a laser as the flash). Criteria for determining image data quality such as frame rate, target detectability, and resolution were used to quantify the minimum requirements of an imaging sensor.

  5. Stellar model chromospheres. XIII - M dwarf stars

    Science.gov (United States)

    Giampapa, M. S.; Worden, S. P.; Linsky, J. L.

    1982-01-01

    Single-component, homogeneous model chromospheres that are consistent with high-resolution profiles of the Ca II K line calibrated in surface flux units for three dMe and 2 dM stars observed at quiescent times are constructed. The models reveal several systematic trends. Large values of the ratio of T(min) to T(eff) are derived, indicating a large amount of nonradiative heating present in the upper photospheres of M dwarf stars. It is also found that the lower chromospheric temperature gradient is similar for all the M dwarf stars. Since for the models here the chromospheric K line emission strength is most sensitive to the total amount of chromospheric material present within the approximate temperature range T(min)-6000 K, increasing the emission strength is not simply due to increasing chromospheric temperature gradients. It is also found that both the electron density and electron temperature at one thermalization length in the K line below the top of the chromospheres are greater in the dMe stars than in the dM stars. The M dwarf models here have microturbulent velocities between 1 and 2 km/sec, which are much smaller than for solar chromosphere models.

  6. Parnassiana nova : XIII. Vier neue Hybriden

    NARCIS (Netherlands)

    Eisner, C.

    1957-01-01

    Zu dem Gelingen der nachstehend beschriebenen Kreuzungen haben drei Wiener Entomologen beigetragen, deren Namen ich eigentlich bei der Benennung der Hybriden festzuhalten die Absicht hatte. Da das indessen nach den neuesten Nomenklaturregeln nicht statthaft ist, muss ich mich darauf beschränken zu

  7. Planck 2013 results. XIII. Galactic CO emission

    CERN Document Server

    Ade, P.A.R.; Alves, M.I.R.; Armitage-Caplan, C.; Arnaud, M.; Ashdown, M.; Atrio-Barandela, F.; Aumont, J.; Baccigalupi, C.; Banday, A.J.; Barreiro, R.B.; Bartlett, J.G.; Battaner, E.; Benabed, K.; Benoit, A.; Benoit-Levy, A.; Bernard, J. -P.; Bersanelli, M.; Bielewicz, P.; Bobin, J.; Bock, J.J.; Bonaldi, A.; Bond, J.R.; Borrill, J.; Bouchet, F.R.; Boulanger, F.; Bridges, M.; Bucher, M.; Burigana, C.; Butler, R.C.; Cardoso, J. -F.; Catalano, A.; Chamballu, A.; Chary, R. -R.; Chen, X.; Chiang, L. -Y; Chiang, H.C.; Christensen, P.R.; Church, S.; Clements, D.L.; Colombi, S.; Colombo, L.P.L.; Combet, C.; Couchot, F.; Coulais, A.; Crill, B.P.; Curto, A.; Cuttaia, F.; Danese, L.; Davies, R.D.; de Bernardis, P.; de Rosa, A.; de Zotti, G.; Delabrouille, J.; Delouis, J. -M.; Dempsey, J.T.; Desert, F. -X.; Dickinson, C.; Diego, J.M.; Dole, H.; Donzelli, S.; Dore, O.; Douspis, M.; Dupac, X.; Efstathiou, G.; Enblin, T.A.; Eriksen, H.K.; Falgarone, E.; Finelli, F.; Forni, O.; Frailis, M.; Franceschi, E.; Fukui, Y.; Galeotta, S.; Ganga, K.; Giard, M.; Giraud-Heraud, Y.; Gonzalez-Nuevo, J.; Gorski, K.M.; Gratton, S.; Gregorio, A.; Gruppuso, A.; Handa, T.; Hansen, F.K.; Hanson, D.; Harrison, D.; Henrot-Versille, S.; Hernandez-Monteagudo, C.; Herranz, D.; Hildebrandt, S.R.; Hily-Blant, P.; Hivon, E.; Hobson, M.; Holmes, W.A.; Hornstrup, A.; Hovest, W.; Huffenberger, K.M.; Hurier, G.; Jaffe, T.R.; Jaffe, A.H.; Jewell, J.; Jones, W.C.; Juvela, M.; Keihanen, E.; Keskitalo, R.; Kisner, T.S.; Knoche, J.; Knox, L.; Kunz, M.; Kurki-Suonio, H.; Lagache, G.; Lahteenmaki, A.; Lamarre, J. -M.; Lasenby, A.; Laureijs, R.J.; Lawrence, C.R.; Leonardi, R.; Leon-Tavares, J.; Lesgourgues, J.; Liguori, M.; Lilje, P.B.; Linden-Vornle, M.; Lopez-Caniego, M.; Lubin, P.M.; Macias-Perez, J.F.; Maffei, B.; Mandolesi, N.; Maris, M.; Marshall, D.J.; Martin, P.G.; Martinez-Gonzalez, E.; Masi, S.; Matarrese, S.; Matthai, F.; Mazzotta, P.; McGehee, P.; Melchiorri, A.; Mendes, L.; Mennella, A.; Migliaccio, M.; Mitra, S.; Miville-Deschenes, M. -A.; Moneti, A.; Montier, L.; Moore, T.J.T.; Morgante, G.; Morino, J.; Mortlock, D.; Munshi, D.; Nakajima, T.; Naselsky, P.; Nati, F.; Natoli, P.; Netterfield, C.B.; Norgaard-Nielsen, H.U.; Noviello, F.; Novikov, D.; Novikov, I.; Okuda, T.; Osborne, S.; Oxborrow, C.A.; Paci, F.; Pagano, L.; Pajot, F.; Paladini, R.; Paoletti, D.; Pasian, F.; Patanchon, G.; Perdereau, O.; Perotto, L.; Perrotta, F.; Piacentini, F.; Piat, M.; Pierpaoli, E.; Pietrobon, D.; Plaszczynski, S.; Pointecouteau, E.; Polenta, G.; Ponthieu, N.; Popa, L.; Poutanen, T.; Pratt, G.W.; Preezeau, G.; Prunet, S.; Puget, J. -L.; Rachen, J.P.; Reach, W.T.; Rebolo, R.; Reinecke, M.; Remazeilles, M.; Renault, C.; Ricciardi, S.; Riller, T.; Ristorcelli, I.; Rocha, G.; Rosset, C.; Roudier, G.; Rowan-Robinson, M.; Rubino-Martin, J.A.; Rusholme, B.; Sandri, M.; Santos, D.; Savini, G.; Scott, D.; Seiffert, M.D.; Shellard, E.P.S.; Spencer, L.D.; Starck, J. -L.; Stolyarov, V.; Stompor, R.; Sudiwala, R.; Sunyaev, R.; Sureau, F.; Sutton, D.; Suur-Uski, A. -S.; Sygnet, J. -F.; Tauber, J.A.; Tavagnacco, D.; Terenzi, L.; Thomas, H.S.; Toffolatti, L.; Tomasi, M.; Torii, K.; Tristram, M.; Tucci, M.; Tuovinen, J.; Umana, G.; Valenziano, L.; Valiviita, J.; Van Tent, B.; Vielva, P.; Villa, F.; Vittorio, N.; Wade, L.A.; Wandelt, B.D.; Wehus, I.K.; Yoda, H. Yamamoto T.; Yvon, D.; Zacchei, A.; Zonca, A.

    2014-10-29

    Rotational transition lines of CO play a major role in molecular radio astronomy and in particular in the study of star formation and the Galactic structure. Although a wealth of data exists in the Galactic plane and some well-known molecular clouds, there is no available CO high sensitivity all-sky survey to date. Such all-sky surveys can be constructed using the \\Planck\\ HFI data because the three lowest CO rotational transition lines at 115, 230 and 345 GHz significantly contribute to the signal of the 100, 217 and 353 GHz HFI channels respectively. Two different component separation methods are used to extract the CO maps from Planck HFI data. The maps obtained are then compared to one another and to existing external CO surveys. From these quality checks the best CO maps in terms of signal to noise and/or residual foreground contamination are selected. Three sets of velocity-integrated CO emission maps are produced: Type 1 maps of the CO (1-0), (2-1), and (3-2) rotational transitions with low foreground ...

  8. Planck 2013 results. XIII. Galactic CO emission

    DEFF Research Database (Denmark)

    Ade, P. A. R.; Aghanim, N.; Alves, M. I. R.

    2014-01-01

    Rotational transition lines of CO play a major role in molecular radio astronomy as a mass tracer and in particular in the study of star formation and Galactic structure. Although a wealth of data exists for the Galactic plane and some well-known molecular clouds, there is no available high sensi...

  9. Planck 2015 results. XIII. Cosmological parameters

    CERN Document Server

    Ade, P.A.R.; Arnaud, M.; Ashdown, M.; Aumont, J.; Baccigalupi, C.; Banday, A.J.; Barreiro, R.B.; Bartlett, J.G.; Bartolo, N.; Battaner, E.; Battye, R.; Benabed, K.; Benoit, A.; Benoit-Levy, A.; Bernard, J.P.; Bersanelli, M.; Bielewicz, P.; Bonaldi, A.; Bonavera, L.; Bond, J.R.; Borrill, J.; Bouchet, F.R.; Boulanger, F.; Bucher, M.; Burigana, C.; Butler, R.C.; Calabrese, E.; Cardoso, J.F.; Catalano, A.; Challinor, A.; Chamballu, A.; Chary, R.R.; Chiang, H.C.; Chluba, J.; Christensen, P.R.; Church, S.; Clements, D.L.; Colombi, S.; Colombo, L.P.L.; Combet, C.; Coulais, A.; Crill, B.P.; Curto, A.; Cuttaia, F.; Danese, L.; Davies, R.D.; Davis, R.J.; de Bernardis, P.; de Rosa, A.; de Zotti, G.; Delabrouille, J.; Desert, F.X.; Di Valentino, E.; Dickinson, C.; Diego, J.M.; Dolag, K.; Dole, H.; Donzelli, S.; Dore, O.; Douspis, M.; Ducout, A.; Dunkley, J.; Dupac, X.; Efstathiou, G.; Elsner, F.; Ensslin, T.A.; Eriksen, H.K.; Farhang, M.; Fergusson, J.; Finelli, F.; Forni, O.; Frailis, M.; Fraisse, A.A.; Franceschi, E.; Frejsel, A.; Galeotta, S.; Galli, S.; Ganga, K.; Gauthier, C.; Gerbino, M.; Ghosh, T.; Giard, M.; Giraud-Heraud, Y.; Giusarma, E.; Gjerlow, E.; Gonzalez-Nuevo, J.; Gorski, K.M.; Gratton, S.; Gregorio, A.; Gruppuso, A.; Gudmundsson, J.E.; Hamann, J.; Hansen, F.K.; Hanson, D.; Harrison, D.L.; Helou, G.; Henrot-Versille, S.; Hernandez-Monteagudo, C.; Herranz, D.; Hildebrandt, S.R.; Hivon, E.; Hobson, M.; Holmes, W.A.; Hornstrup, A.; Hovest, W.; Huang, Z.; Huffenberger, K.M.; Hurier, G.; Jaffe, A.H.; Jaffe, T.R.; Jones, W.C.; Juvela, M.; Keihanen, E.; Keskitalo, R.; Kisner, T.S.; Kneissl, R.; Knoche, J.; Knox, L.; Kunz, M.; Kurki-Suonio, H.; Lagache, G.; Lahteenmaki, A.; Lamarre, J.M.; Lasenby, A.; Lattanzi, M.; Lawrence, C.R.; Leahy, J.P.; Leonardi, R.; Lesgourgues, J.; Levrier, F.; Lewis, A.; Liguori, M.; Lilje, P.B.; Linden-Vornle, M.; Lopez-Caniego, M.; Lubin, P.M.; Macias-Perez, J.F.; Maggio, G.; Mandolesi, N.; Mangilli, A.; Marchini, A.; Martin, P.G.; Martinelli, M.; Martinez-Gonzalez, E.; Masi, S.; Matarrese, S.; Mazzotta, P.; McGehee, P.; Meinhold, P.R.; Melchiorri, A.; Melin, J.B.; Mendes, L.; Mennella, A.; Migliaccio, M.; Millea, M.; Mitra, S.; Miville-Deschenes, M.A.; Moneti, A.; Montier, L.; Morgante, G.; Mortlock, D.; Moss, A.; Munshi, D.; Murphy, J.A.; Naselsky, P.; Nati, F.; Natoli, P.; Netterfield, C.B.; Norgaard-Nielsen, H.U.; Noviello, F.; Novikov, D.; Novikov, I.; Oxborrow, C.A.; Paci, F.; Pagano, L.; Pajot, F.; Paladini, R.; Paoletti, D.; Partridge, B.; Pasian, F.; Patanchon, G.; Pearson, T.J.; Perdereau, O.; Perotto, L.; Perrotta, F.; Pettorino, V.; Piacentini, F.; Piat, M.; Pierpaoli, E.; Pietrobon, D.; Plaszczynski, S.; Pointecouteau, E.; Polenta, G.; Popa, L.; Pratt, G.W.; Prezeau, G.; Prunet, S.; Puget, J.L.; Rachen, J.P.; Reach, W.T.; Rebolo, R.; Reinecke, M.; Remazeilles, M.; Renault, C.; Renzi, A.; Ristorcelli, I.; Rocha, G.; Rosset, C.; Rossetti, M.; Roudier, G.; d'Orfeuil, B.Rouille; Rowan-Robinson, M.; Rubino-Martin, J.A.; Rusholme, B.; Said, N.; Salvatelli, V.; Salvati, L.; Sandri, M.; Santos, D.; Savelainen, M.; Savini, G.; Scott, D.; Seiffert, M.D.; Serra, P.; Shellard, E.P.S.; Spencer, L.D.; Spinelli, M.; Stolyarov, V.; Stompor, R.; Sudiwala, R.; Sunyaev, R.; Sutton, D.; Suur-Uski, A.S.; Sygnet, J.F.; Tauber, J.A.; Terenzi, L.; Toffolatti, L.; Tomasi, M.; Tristram, M.; Trombetti, T.; Tucci, M.; Tuovinen, J.; Turler, M.; Umana, G.; Valenziano, L.; Valiviita, J.; Van Tent, B.; Vielva, P.; Villa, F.; Wade, L.A.; Wandelt, B.D.; Wehus, I.K.; White, M.; White, S.D.M.; Wilkinson, A.; Yvon, D.; Zacchei, A.; Zonca, A.

    2016-01-01

    We present results based on full-mission Planck observations of temperature and polarization anisotropies of the CMB. These data are consistent with the six-parameter inflationary LCDM cosmology. From the Planck temperature and lensing data, for this cosmology we find a Hubble constant, H0= (67.8 +/- 0.9) km/s/Mpc, a matter density parameter Omega_m = 0.308 +/- 0.012 and a scalar spectral index with n_s = 0.968 +/- 0.006. (We quote 68% errors on measured parameters and 95% limits on other parameters.) Combined with Planck temperature and lensing data, Planck LFI polarization measurements lead to a reionization optical depth of tau = 0.066 +/- 0.016. Combining Planck with other astrophysical data we find N_ eff = 3.15 +/- 0.23 for the effective number of relativistic degrees of freedom and the sum of neutrino masses is constrained to < 0.23 eV. Spatial curvature is found to be |Omega_K| < 0.005. For LCDM we find a limit on the tensor-to-scalar ratio of r <0.11 consistent with the B-mode constraints fr...

  10. Planck 2015 results: XIII. Cosmological parameters

    DEFF Research Database (Denmark)

    Ade, P. A R; Aghanim, N.; Arnaud, M.

    2016-01-01

    is constrained to w =-1.006 ± 0.045, consistent with the expected value for a cosmological constant. The standard big bang nucleosynthesis predictions for the helium and deuterium abundances for the best-fit Planck base ΛCDM cosmology are in excellent agreement with observations. We also constraints...... of the theory; for example, combining Planck observations with other astrophysical data we find Neff = 3.15 ± 0.23 for the effective number of relativistic degrees of freedom, consistent with the value Neff = 3.046 of the Standard Model of particle physics. The sum of neutrino masses is constrained to â'mν

  11. XIII Modave Summer School in Mathematical Physics

    Science.gov (United States)

    2017-09-01

    The Modave Summer School on Mathematical Physics is a yearly summer school in topics of theoretical physics. Various topics ranging from quantum gravity and cosmology to theoretical particle physics and string theory. The school takes place in Modave, a charming village in the Belgian Ardennes close to Huy. Modave School is organised by PhD students for PhD students, and this makes it rather unique. The courses are taught by Post-Docs or late PhD students, and they are all made of pedagogical, basic blackboard lectures about recent topics in theoretical physics. Participants and lecturers eat and sleep in the same place where the lectures are given. The absence of senior members, and the fact of spending day and night together in an isolated, peaceful place contribute to creating an informal atmosphere and facilitating interactions. Lectures of the thirteenth edition are centered around the following subjects: bulk reconstruction in AdS/CFT, twistor theory, AdS_2/CFT_1 and SYK, geometry and topology, and asymptotic charges.

  12. Reproductive cloning combined with genetic modification.

    Science.gov (United States)

    Strong, C

    2005-11-01

    Although there is widespread opposition to reproductive cloning, some have argued that its use by infertile couples to have genetically related children would be ethically justifiable. Others have suggested that lesbian or gay couples might wish to use cloning to have genetically related children. Most of the main objections to human reproductive cloning are based on the child's lack of unique nuclear DNA. In the future, it may be possible safely to create children using cloning combined with genetic modifications, so that they have unique nuclear DNA. The genetic modifications could be aimed at giving such children genetic characteristics of both members of the couple concerned. Thus, cloning combined with genetic modification could be appealing to infertile, lesbian, or gay couples who seek genetically related children who have genetic characteristics of both members. In such scenarios, the various objections to human reproductive cloning that are based on the lack of genetic uniqueness would no longer be applicable. The author argues that it would be ethically justifiable for such couples to create children in this manner, assuming these techniques could be used safely.

  13. On P values and effect modification.

    Science.gov (United States)

    Mayer, Martin

    2017-12-01

    A crucial element of evidence-based healthcare is the sound understanding and use of statistics. As part of instilling sound statistical knowledge and practice, it seems useful to highlight instances of unsound statistical reasoning or practice, not merely in captious or vitriolic spirit, but rather, to use such error as a springboard for edification by giving tangibility to the concepts at hand and highlighting the importance of avoiding such error. This article aims to provide an instructive overview of two key statistical concepts: effect modification and P values. A recent article published in the Journal of the American College of Cardiology on side effects related to statin therapy offers a notable example of errors in understanding effect modification and P values, and although not so critical as to entirely invalidate the article, the errors still demand considerable scrutiny and correction. In doing so, this article serves as an instructive overview of the statistical concepts of effect modification and P values. Judicious handling of statistics is imperative to avoid muddying their utility. This article contributes to the body of literature aiming to improve the use of statistics, which in turn will help facilitate evidence appraisal, synthesis, translation, and application.

  14. Subtractive Structural Modification of Morpho Butterfly Wings.

    Science.gov (United States)

    Shen, Qingchen; He, Jiaqing; Ni, Mengtian; Song, Chengyi; Zhou, Lingye; Hu, Hang; Zhang, Ruoxi; Luo, Zhen; Wang, Ge; Tao, Peng; Deng, Tao; Shang, Wen

    2015-11-11

    Different from studies of butterfly wings through additive modification, this work for the first time studies the property change of butterfly wings through subtractive modification using oxygen plasma etching. The controlled modification of butterfly wings through such subtractive process results in gradual change of the optical properties, and helps the further understanding of structural optimization through natural evolution. The brilliant color of Morpho butterfly wings is originated from the hierarchical nanostructure on the wing scales. Such nanoarchitecture has attracted a lot of research effort, including the study of its optical properties, its potential use in sensing and infrared imaging, and also the use of such structure as template for the fabrication of high-performance photocatalytic materials. The controlled subtractive processes provide a new path to modify such nanoarchitecture and its optical property. Distinct from previous studies on the optical property of the Morpho wing structure, this study provides additional experimental evidence for the origination of the optical property of the natural butterfly wing scales. The study also offers a facile approach to generate new 3D nanostructures using butterfly wings as the templates and may lead to simpler structure models for large-scale man-made structures than those offered by original butterfly wings. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Particle Distribution Modification by Low Amplitude Modes

    International Nuclear Information System (INIS)

    White, R.B.; Gorelenkov, N.; Heidbrink, W.W.; Van Zeeland, M.A.

    2009-01-01

    Modification of a high energy particle distribution by a spectrum of low amplitude modes is investigated using a guiding center code. Only through resonance are modes effective in modifying the distribution. Diagnostics are used to illustrate the mode-particle interaction and to find which effects are relevant in producing significant resonance, including kinetic Poincare plots and plots showing those orbits with time averaged mode-particle energy transfer. Effects of pitch angle scattering and drag are studied, as well as plasma rotation and time dependence of the equilibrium and mode frequencies. A specific example of changes observed in a DIII-D deuterium beam distribution in the presence of low amplitude experimentally validated Toroidal Alfven (TAE) eigenmodes and Reversed Shear Alfven (RSAE) eigenmodes is examined in detail. Comparison with experimental data shows that multiple low amplitude modes can account for significant modification of high energy beam particle distributions. It is found that there is a stochastic threshold for beam profile modification, and that the experimental amplitudes are only slightly above this threshold.

  16. Advanced oxidation and adsorption modification of dust waste from standard moulding sands

    Directory of Open Access Journals (Sweden)

    A. Baliński

    2010-04-01

    Full Text Available The article discusses the process of advanced oxidation (AO with application of ultrasounds and surface modification of the dust waste collected during dry dedusting of processed moulding sands with bentonite binder. A beneficial effect of both AO and adsorption modification of dust waste, when performed with the selected type of polyelectrolyte, on the technological and mechanical properties of moulding sands prepared with an addition of this dust has been stated. In spite of the bentonite content in moulding sand reduced by 43% and replaced with modified dust waste, the mechanical properties, i.e. the compression and tensile strengths, examined on sand specimens have been improved by 10% and 13%, respectively, with no harm to other basic technological sand properties. At the same time, it was also possible to reduce by about 30% the emission rate of the main gaseous component from the BTEX group, i.e. benzene.

  17. Reactive modification of polyesters and their blends

    Science.gov (United States)

    Wan, Chen

    2004-12-01

    As part of a broader research effort to investigate the chemical modification of polyesters by reactive processing a low molecular weight (MW) unsaturated polyester (UP) and a higher MW saturated polyester, polyethylene terephthalate (PET), alone or blended with polypropylene (PP) were melt processed in a batch mixer and continuous twin screw extruders. Modification was monitored by on-line rheology and the products were characterized primarily by off-line rheology, morphology and thermal analysis. Efforts were made to establish processing/property relationships and provide an insight of the accompanying structural changes. The overall response of the reactively modified systems was found to be strongly dependent on the component characteristics, blend composition, type and concentrations of reactive additives and processing conditions. The work concluded that UP can be effectively modified through reactive melt processing. Its melt viscosity and MW can be increased through chemical reactions between organic peroxides (POX) and chain unsaturation or between MgO and carboxyl/hydroxyl end groups. Reactive blending of PP/UP blends through peroxide modification gave finer and more uniform morphology than unreacted blends and at a given PP/UP weight ratio more thermoplastic elastomers-like rheological behavior. This is due to the continuously decreasing viscosity ratio of PP/UP towards unity by the competing reactions between POX and the blend components and formation of PP-UP copolymers which serve as in-situ compatibilizers to promote better interfacial adhesion. Kinetics of the competing reactions were analyzed through a developed model. In addition to POX concentration and mixing efficiency, rheology and morphology of UP/PP bends were significantly affected by the addition of inorganic and organic coagents. Addition of coagents such as a difunctional maleimide, MgO and/or an anhydride functionalized PP during reactive blending offers effective means for tailoring

  18. Exploring the diversity of protein modifications: special bacterial phosphorylation systems

    DEFF Research Database (Denmark)

    Mijakovic, Ivan; Grangeasse, Christophe; Turgay, Kürşad

    2016-01-01

    Protein modifications not only affect protein homeostasis but can also establish new cellular protein functions and are important components of complex cellular signal sensing and transduction networks. Among these post-translational modifications, protein phosphorylation represents the one that ...

  19. Tribological effects of polymer surface modification through plastic

    Indian Academy of Sciences (India)

    Tribological effects of polymer surface modification through plastic deformation. K O Low K J Wong ... In this regard, a surface modification technique through plastic deformation has been implemented. ... Bulletin of Materials Science | News.

  20. Nuclear Plant Modification in a Risk-Informed Environment

    International Nuclear Information System (INIS)

    Gallucci, Raymond H.V.

    2002-01-01

    This paper examines a specific nuclear power plant modification performed in a risk-informed regulatory environment. It quantifies both the permanent and temporary effects of the modification, and performs a cost-benefit evaluation. (authors)

  1. Hollywood's Conversion to Color: The Technological, Economic and Aesthetic Factors.

    Science.gov (United States)

    Kindem, Forham A.

    1979-01-01

    Discusses the film industry's conversion to color cinematography in the period between the 1920s and 1960s. Cites economic considerations, technological modifications, and aesthetic preferences by audiences as factors in this development. (JMF)

  2. Generation and genetic modification of induced pluripotent stem cells.

    Science.gov (United States)

    Schambach, Axel; Cantz, Tobias; Baum, Christopher; Cathomen, Toni

    2010-07-01

    The generation of induced pluripotent stem cells (iPSCs) enabled by exogenous expression of the canonical Oct4, Sox2, Klf4 and c-Myc reprogramming factors has opened new ways to create patient- or disease-specific pluripotent cells. iPSCs represent an almost inexhaustible source of cells for targeted differentiation into somatic effector cells and hence are likely to be invaluable for therapeutic applications and disease-related research. After an introduction on the biology of reprogramming we cover emerging technological advances, including new reprogramming approaches, small-molecule compounds and tailored genetic modification, and give an outlook towards potential clinical applications of iPSCs. Although this field is progressing rapidly, reprogramming is still an inefficient process. The reader will learn about innovative tools to generate patient-specific iPSCs and how to modify these established lines in a safe way. Ideally, the disease-causing mutation is edited directly in the genome using novel technologies based on artificial nucleases, such as zinc-finger nucleases. Human iPSCs create fascinating options with regard to disease modeling, drug testing, developmental studies and therapeutic applications. However, important hurdles have to be taken and more efficient protocols to be established to achieve the ambitious goal of bringing iPSCs into clinical use.

  3. The application of radiation technology in the field of medical biomaterials

    International Nuclear Information System (INIS)

    Jin Huanyu; An Yan; Yin Hua

    2011-01-01

    The radiation technology has been applied extensively in the fields of biological engineering, tissue engineering, medical industry and so on. It also plays an important role in the sterilization and modification of biomaterials. This work reviews the development of irradiation technology and absorbed doses for the sterilization and modification of medical biomaterials. (authors)

  4. Factors Causing Delay of Modification Projects at Koeberg Nuclear Power Station

    International Nuclear Information System (INIS)

    Ntoyanto, S.

    2017-01-01

    Modification project delays could lead to: disrupting the maintenance shutdown (outage) projects' schedule, affecting electricity capacity of the national grid., possible load-shedding restricting electricity supply to domestic, commercial, and industrial consumers; and detrimental consequences to the country's economic activities. To address proficiency of a project manager by improving: Understanding of the organizational processes, High-level technical knowledge of a nuclear power plant technology

  5. Application of radiation chemistry in materials modification and environmental protection

    International Nuclear Information System (INIS)

    Chmielewski, A.G.

    2007-01-01

    thermoshrinkable tubes and types possessing '' memory effect ''. Through radiation, grafting metal adsorbents and ion exchange membranes can be developed. Radiation is early applied tool in the area of nanomaterials engineering; arrangement of atoms and ions has been performed using ion or electron beams for many years. New trends concern surface curing and development of ion track membranes and controlled release drug-delivery systems. Finally, radiation processing concerns gem stones colorization, development of high temperature resistant fibers (SiC) and semiconductor modification. Over the past few years, radiation processing technologies aimed at ensuring the safety of gaseous and liquid effluents discharged to the environment have been developed. It has been demonstrated that radiation processing based technologies for flue gas treatment (SO X and NO X removal), wastewater purification, and sludge hygienization can be effectively deployed to mitigate environmental degradation. Electron beam technology is among the most promising advanced technologies of new generation. This is a dry-scrubbing process of simultaneous SO 2 and NO x removal, where no waste except the fertilizer by-product are generated.The other possibility is application of the process for VOC removal. Tests at the pilot plant constructed at a coal-fired power station were performed with the purpose of estimating the influence of electron beam on VOCs present in flue gas, during SO 2 and NO x removal. The removal efficiencies have been ranged from 40% up to 98%. The chlorocarbons including dioxins may be removed with high efficiency as well [57, 58]. During the radiolysis of water reactive radicals of strong oxidizing or reducing properties are formed that can transform the pollutants in the liquids wastes. A large number of substances such as hard surfactants, lignin, pesticides cannot be degraded by conventional biochemical methods and thus escape from decomposition in biological treatment. Research and

  6. 14 CFR 21.9 - Replacement and modification articles.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Replacement and modification articles. 21.9... CERTIFICATION PROCEDURES FOR PRODUCTS AND PARTS General § 21.9 Replacement and modification articles. (a) If a person knows, or should know, that a replacement or modification article is reasonably likely to be...

  7. MODIFICATION OF SURFACE KONDENSITSIONNYH AEROSOLS WELDING AND METALLURGICHESKIH PRODUCTIONS

    Directory of Open Access Journals (Sweden)

    A. A. Ennan

    2016-04-01

    Full Text Available Chemical modification of surface kondensitsionnyh aerosols (KA which formation when heat treatment metals (process of weld, foundry processes with application chlorosilanes are suggested. Adsorbtion vapor of water on modification powders KA decreases and changes in varies from modifier and conditions modification are setted.

  8. 23 CFR 630.110 - Modification of original agreement.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Modification of original agreement. 630.110 Section 630... OPERATIONS PRECONSTRUCTION PROCEDURES Project Authorization and Agreements § 630.110 Modification of original agreement. (a) When changes are needed to the original project agreement, a modification of agreement shall...

  9. Cleaner production technology for the NDT industry

    International Nuclear Information System (INIS)

    Relunia, Estrella D.; Mateo, Alejandro J.

    2001-01-01

    This paper discusses te wastes generated from the conduct of nondestructive testing (NDT) techniques and operations like NDT film processing and the systems to reduce water pollution and the film system quality control. Discussions on clean technology production concepts and philosophy is also discussed. A case study on cleaner production technology where a process and equipment modifications and a product substitution were implemented is presented. The equipment modification and product substitution eliminated the use of 1,1,1-trichloroethane in its cleaning operation. (Author)

  10. Surface modifications of magnesium alloys for biomedical applications.

    Science.gov (United States)

    Yang, Jingxin; Cui, Fuzhai; Lee, In Seop

    2011-07-01

    In recent years, research on magnesium (Mg) alloys had increased significantly for hard tissue replacement and stent application due to their outstanding advantages. Firstly, Mg alloys have mechanical properties similar to bone which avoid stress shielding. Secondly, they are biocompatible essential to the human metabolism as a factor for many enzymes. In addition, main degradation product Mg is an essential trace element for human enzymes. The most important reason is they are perfectly biodegradable in the body fluid. However, extremely high degradation rate, resulting in too rapid loss of mechanical strength in chloride containing environments limits their applications. Engineered artificial biomaterials with appropriate mechanical properties, surface chemistry, and surface topography are in a great demand. As the interaction between the cells and tissues with biomaterials at the tissue--implant interface is a surface phenomenon; surface properties play a major role in determining both the biological response to implants and the material response to the physiological condition. Therefore, the ability to modify the surface properties while preserve the bulk properties is important, and surface modification to form a hard, biocompatible and corrosion resistant modified layer have always been an interesting topic in biomaterials field. In this article, attempts are made to give an overview of the current research and development status of surface modification technologies of Mg alloys for biomedical materials research. Further, the advantages/disadvantages of the different methods and with regard to the most promising method for Mg alloys are discussed. Finally, the scientific challenges are proposed based on own research and the work of other scientists.

  11. Modification of the IAN-R1 reactor

    International Nuclear Information System (INIS)

    Jaime, J.; Ahumada, S.; Spin, R.A.

    1990-01-01

    The IAN-R1 reactor is the only nuclear reactor operating in Colombia; it is installed at the Institute of Nuclear Affairs (AIN) in Bogota, which is an official body coming under the Ministry of Mining and Energy. This reactor started operation in January 1965 with a rated power of 10 kW and was modified a year later to operate at 20 kW, which has been its rated power up to the present. Given its importance for the application of nuclear technology in Columbia for various purposes, principally in the areas of neutron activation analysis, determination of uranium content in minerals using the delayed neutron counting method, production of certain radioisotopes such as 198 Au and 82 Br for engineering applications, and production of radioactive material for teaching and research purposes, research has been in progress for some years into ways of increasing its power. The study on experimental requirements and on the demand for locally produced radioisotopes came to the conclusion that its power should be increased to 1000 kW, which would allow the facility to remain on the same site. The modification includes conversion of the core to low-enriched fuel, operation up to 1 MW, modification of the shielding, renovation of instrumentation and installation of a radioisotope processing plant. When the reactor is modified we will be able to produce other radioisotopes for applications in nuclear medicine, industry and engineering; at the same time, the safety of the facility will be optimized and the experimental facilities improved

  12. PREFACE Surface Modifications and Functionalization of Materials for Biomedical Applications

    Science.gov (United States)

    Endrino, Jose Luis; Puértolas, Jose A.; Albella, Jose M.

    2010-11-01

    Conference photograph This special issue contains selected papers which were presented as invited and contributed communications at the workshop entitled 'Surface modification and functionalization of materials for biomedical applications' (BIO-COAT 2010) which was held on 24 June 2010 in Zaragoza (Spain). The surface of a material plays a major role in its interaction with the biological medium. Processes related to the mechanical stability of articular devices in contact, osseointegration, thrombogenicity, corrosion and leaching, or the inflammatory response of rejection of a material, are clearly conditioned by the surface properties. Therefore, the modification or functionalization of surfaces can have an important impact on these issues. New techniques for functionalization by thin film deposition or surface treatments help to improve superficial properties, while understanding the interaction of the surface-biological medium is critical for their application in new devices. Jointly organized by the Spanish Materials Research Society, BIO-COAT 2010 provided an open forum to discuss the progress and latest developments in thin film processing and the engineering of biomaterials. Invited lectures were particularly aimed at providing overviews on scientific topics and were given by recognized world-class scientists. Two of them have contributed with a proceedings article to this selected collection (articles 012001 and 012008). The contributed communications were focused on particular cutting-edge aspects of thin film science and functionalization technologies for biomaterials, showing the major scientific push of Spanish research groups in the field. The 2010 BIO-COAT conference was organized along four main topics: (1) functionalization and texture on surfaces, (2) tribology and corrosion, (3) the surface modification of biomaterials, and (4) surface-biological environment interactions. The papers published in this volume were accepted for publication after

  13. Efficient reanalysis of structures by a direct modification method. [local stiffness modifications of large structures

    Science.gov (United States)

    Raibstein, A. I.; Kalev, I.; Pipano, A.

    1976-01-01

    A procedure for the local stiffness modifications of large structures is described. It enables structural modifications without an a priori definition of the changes in the original structure and without loss of efficiency due to multiple loading conditions. The solution procedure, implemented in NASTRAN, involved the decomposed stiffness matrix and the displacement vectors of the original structure. It solves the modified structure exactly, irrespective of the magnitude of the stiffness changes. In order to investigate the efficiency of the present procedure and to test its applicability within a design environment, several real and large structures were solved. The results of the efficiency studies indicate that the break-even point of the procedure varies between 8% and 60% stiffness modifications, depending upon the structure's characteristics and the options employed.

  14. Sport Technology

    CSIR Research Space (South Africa)

    Kirkbride, T

    2007-11-01

    Full Text Available Technology is transforming the games themselves and at times with dire consequences. Tony Kirkbride, Head: CSIR Technology Centre said there are a variety of sports technologies and there have been advances in material sciences and advances...

  15. Assistive Technology

    Science.gov (United States)

    ... Page Resize Text Printer Friendly Online Chat Assistive Technology Assistive technology (AT) is any service or tool that helps ... be difficult or impossible. For older adults, such technology may be a walker to improve mobility or ...

  16. Modifications of Sp(2) covariant superfield quantization

    Energy Technology Data Exchange (ETDEWEB)

    Gitman, D.M.; Moshin, P.Yu

    2003-12-04

    We propose a modification of the Sp(2) covariant superfield quantization to realize a superalgebra of generating operators isomorphic to the massless limit of the corresponding superalgebra of the osp(1,2) covariant formalism. The modified scheme ensures the compatibility of the superalgebra of generating operators with extended BRST symmetry without imposing restrictions eliminating superfield components from the quantum action. The formalism coincides with the Sp(2) covariant superfield scheme and with the massless limit of the osp(1,2) covariant quantization in particular cases of gauge-fixing and solutions of the quantum master equations.

  17. Ultrasonic Recovery and Modification of Food Ingredients

    Science.gov (United States)

    Vilkhu, Kamaljit; Manasseh, Richard; Mawson, Raymond; Ashokkumar, Muthupandian

    There are two general classes of effects that sound, and ultrasound in particular, can have on a fluid. First, very significant modifications to the nature of food and food ingredients can be due to the phenomena of bubble acoustics and cavitation. The applied sound oscillates bubbles in the fluid, creating intense forces at microscopic scales thus driving chemical changes. Second, the sound itself can cause the fluid to flow vigorously, both on a large scale and on a microscopic scale; furthermore, the sound can cause particles in the fluid to move relative to the fluid. These streaming phenomena can redistribute materials within food and food ingredients at both microscopic and macroscopic scales.

  18. In medium modification of nucleon electromagnetic properties

    International Nuclear Information System (INIS)

    Khanna, F.; Rakhimov, A.; Yakhsiev, U.

    1997-01-01

    Since nucleons are composite objects, their internal structure is expected to be changed by nuclear environment. A Skyrme like Lagrangian is proposed to consider such effects, namely the modification of electromagnetic (EM) properties of the nucleon. The static properties and EM form factors were obtained. It was shown that the charge radius of the nucleon increased in medium and the mass and axial coupling constant are reduced. The enhancement of magnetic moment of proton is smaller than that obtained in non-topological soliton model.Obtained results may be useful in electron nucleus scattering analysis.(A.A.D.)

  19. ASPOD modifications of 1993-1994

    Science.gov (United States)

    Jackson, Jennifer J. (Editor); Fogarty, Paul W.; Muller, Matthew; Martucci, Thomas A., III; Williams, Daniel; Rowney, David A.

    1994-01-01

    ASPOD, Autonomous Space Processors for Orbital Debris, provides a unique way of collecting the space debris that has built up over the past 37 years. For the past several years, ASPOD has gone through several different modifications. This year's concentrations were on the solar cutting array, the solar tracker, the earth based main frame/tilt table, the controls for the two robotic arms, and accurate autocad drawings of ASPOD. This final report contains the reports written by the students who worked on the ASPOD project this year.

  20. EG and G electron linac modifications

    International Nuclear Information System (INIS)

    Norris, N.J.; Detch, J.L.; Kocimski, S.M.; Sawyer, C.R.; Hudson, C.L.

    1986-01-01

    A three-year modification of the EG and G electron linac has been performed to replace obsolete equipment and bring all subsystems up to the current state of the art. Components and subsystems were designed, constructed, and tested off-line to minimize interruption of experiments. The configuration of the modified linac is shown schematically, and performance characteristics are give. Each subsystem is described, including: the electron gun; solenoid focusing system; subharmonic bunchers; accelerating system; RF system; klystron modulators and power supplies; control system; beam handling system; vacuum system; and beam current monitors. 7 refs., 4 figs., 2 tabs

  1. Medium modifications of nucleon electromagnetic form factors

    Energy Technology Data Exchange (ETDEWEB)

    Horikawa, T. [Department of Physics, School of Science, Tokai University, Hiratsuka-shi, Kanagawa 259-1292 (Japan); Bentz, W. [Department of Physics, School of Science, Tokai University, Hiratsuka-shi, Kanagawa 259-1292 (Japan)]. E-mail: bentz@keyaki.cc.u-tokai.ac.jp

    2005-11-28

    We use the Nambu-Jona-Lasinio model as an effective quark theory to investigate the medium modifications of the nucleon electromagnetic form factors. By using the equation of state of nuclear matter derived in this model, we discuss the results based on the naive quark-scalar diquark picture, the effects of finite diquark size, and the meson cloud around the constituent quarks. We apply this description to the longitudinal response function for quasielastic electron scattering. RPA correlations, based on the nucleon-nucleon interaction derived in the same model, are also taken into account in the calculation of the response function.

  2. Cigar Product Modification Among High School Youth.

    Science.gov (United States)

    Trapl, Erika S; Koopman Gonzalez, Sarah J; Cofie, Leslie; Yoder, Laura D; Frank, Jean; Sterling, Kymberle L

    2018-02-07

    Prevalence of cigar use has been increasing among youth. Research indicates that youth are modifying cigar products either by "freaking" (ie, removing the filter paper) or "blunting" (removing the tobacco and supplementing or replacing with marijuana), yet little is known about youth who engage in this behavior. Thus, this study examines demographic and concurrent substance use behaviors of youth who modify cigars. Data from the 2013 Cuyahoga County Youth Risk Behavior survey were examined (n = 16 855). The survey collected data on demographics, cigar product use, cigar modification behaviors, and current cigarette, hookah and marijuana use. Responses to cigar product use items were used to create a composite to classify youth in one of eight unique user categories. Univariate and bivariate statistics were calculated using SPSS complex samples procedures. Overall, 15.2% reported current cigar product use, 11.0% reported current freaking, and 18.5% reported current blunt use; taken together, 25.3% of respondents reported any current use of a cigar product. When examined by user category, of those who endorsed any cigar product use, cigars, cigarillos, and little cigars use only was most endorsed (26.3%), followed by Blunt only (25.2%) and all three (ie, cigars, cigarillos, and little cigars, freaking, and blunting; 17.4%). A substantial proportion of high school youth who report using cigar products are modifying them in some way, with nearly half freaking and nearly two-thirds blunting. Given the FDA Center for Tobacco products recent extension of its regulatory authority to include cigar products, it is imperative to understand more about the prevalence of and reasons for cigar modification behaviors. Although the FDA has recently enacted regulatory authority over cigar products, little is known about cigar product modification. This is the first study to concurrently examine two unique cigar modification behaviors, "freaking" (ie, removing the filter paper) and

  3. Structure modification of particle track membranes

    International Nuclear Information System (INIS)

    Lueck, H.B.; Gemende, B.; Heinrich, B.

    1991-01-01

    Three different structure modifications were studied in order to improve the flux and dirt loading capacity of particle track membranes without affecting their retention characteristic. Divergent irradiation is a very effective tool for decreasing the number of multiple pores and increasing the porosity up to 20 per cent. The technique leads to a remarkable but not efficient enhancement of the surface porosity. Improved surface porosity produced by a double irradiation technique turns out to be very effective with respect to the filtration performance. (author)

  4. Medication for Behavior Modification in Birds.

    Science.gov (United States)

    van Zeeland, Yvonne

    2018-01-01

    The use of behavior modifying drugs may be considered in birds with behavior problems, especially those refractory to behavior modification therapy and environmental management. To accomplish behavior change, a variety of drugs can be used, including psychoactive drugs, hormones, antihistamines, analgesics, and anticonvulsants. Because their prescription to birds is off-label, these drugs are considered appropriate only when a sound rationale can be provided for their use. This requires a (correct) behavioral diagnosis to be established. In addition, regular monitoring and follow-up are warranted to determine the efficacy of the treatment and evaluate the occurrence of potential adverse side effects. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. Nano technology

    International Nuclear Information System (INIS)

    Lee, In Sik

    2002-03-01

    This book is introduction of nano technology, which describes what nano technology is, alpha and omega of nano technology, the future of Korean nano technology and human being's future and nano technology. The contents of this book are nano period is coming, a engine of creation, what is molecular engineering, a huge nano technology, technique on making small things, nano materials with exorbitant possibility, the key of nano world the most desirable nano technology in bio industry, nano development plan of government, the direction of development for nano technology and children of heart.

  6. Rover Technologies

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop and mature rover technologies supporting robotic exploration including rover design, controlling rovers over time delay and for exploring . Technology...

  7. Value-impact assessment of safety-related modifications

    International Nuclear Information System (INIS)

    Knowles, W.M.C.; Dinnie, K.S.; Gordon, C.W.

    1992-01-01

    Like other nuclear utilities, Ontario Hydro, as part of its risk management activities, continually assesses the safety of its nuclear operations. In addition, new regulatory requirements are being applied to the older nuclear power plants. Both of these result in proposed plant modifications designed to reduce the risk to the public. However, modifications to an operating plant can have serious economic effects, and the resources, both financial and personnel, required for the implementation of these modifications are limited. Thus, all potential benefits and effects of a proposed modification must be thoroughly investigated to judge whether the modification is beneficial. Ontario Hydro has begun to use comprehensive value-impact assessments, utilizing plant-specific probabilistic risk assessments (PRAs), as tools to provide an informed basis for judgments on the benefit of safety-related modifications. The results from value-impact assessments can also be used to prioritize the implementation of these modifications

  8. The NEDD8 modification pathway in plants

    Directory of Open Access Journals (Sweden)

    Claus eSchwechheimer

    2014-03-01

    Full Text Available NEDD8, in plants and yeasts also known as RELATED TO UBIQUITIN (RUB, is an evolutionarily conserved 76 amino acid protein highly related to ubiquitin. Like ubiquitin, NEDD8 can be conjugated to and deconjugated from target proteins, but unlike ubiquitin, NEDD8 has not been reported to form chains similar to the different polymeric ubiquitin chains that have a role in a diverse set of cellular processes. NEDD8-modification is best known as a posttranslational modification of the cullin subunits of cullin-RING E3 ubiquitin ligases. In this context, structural analyses have revealed that neddylation induces a conformation change of the cullin that brings the ubiquitylation substrates into proximity of the interacting E2 conjugating enzyme. In turn, NEDD8 deconjugation destabilizes the cullin RING ligase complex allowing for the exchange of substrate recognition subunits via the exchange factor CAND1. In plants, components of the neddylation and deneddylation pathway were identified based on mutants with defects in auxin and light responses and the characterization of these mutants has been instrumental for the elucidation of the neddylation pathway. More recently, there has been evidence from animal and plant systems that NEDD8 conjugation may also regulate the behavior or fate of non-cullin substrates in a number of ways. Here, the current knowledge on NEDD8 processing, conjugation and deconjugation is presented, where applicable, in the context of specific signaling pathways from plants.

  9. Oxidative modification of ferritin induced by methylglyoxal

    Directory of Open Access Journals (Sweden)

    Sung Ho An

    2012-03-01

    Full Text Available Methylglyoxal (MG was identified as an intermediate innon-enzymatic glycation and increased levels were reported inpatients with diabetes. In this study, we evaluated the effects ofMG on the modification of ferritin. When ferritin wasincubated with MG, covalent crosslinking of the proteinincreased in a time- and MG dose-dependent manner.Reactive oxygen species (ROS scavengers, N-acetyl-L-cysteineand thiourea suppressed the MG-mediated ferritinmodification. The formation of dityrosine was observed inMG-mediated ferritin aggregates and ROS scavengers inhibitedthe formation of dityrosine. During the reaction betweenferritin and MG, the generation of ROS was increased as afunction of incubation time. These results suggest that ROSmay play a role in the modification of ferritin by MG. Thereaction between ferritin and MG led to the release of ironions from the protein. Ferritin exposure to MG resulted in aloss of arginine, histidine and lysine residues. It was assumedthat oxidative damage to ferritin caused by MG may induce anincrease in the iron content in cells, which is deleterious tocells. This mechanism, in part, may provide an explanation orthe deterioration of organs under diabetic conditions. [BMBreports 2012; 45(3: 147-152

  10. Excimer laser surface modification: Process and properties

    Energy Technology Data Exchange (ETDEWEB)

    Jervis, T.R.; Nastasi, M. [Los Alamos National Lab., NM (United States); Hirvonen, J.P. [Technical Research Institute, Espoo (Finland). Metallurgy Lab.

    1992-12-01

    Surface modification can improve materials for structural, tribological, and corrosion applications. Excimer laser light has been shown to provide a rapid means of modifying surfaces through heat treating, surface zone refining, and mixing. Laser pulses at modest power levels can easily melt the surfaces of many materials. Mixing within the molten layer or with the gas ambient may occur, if thermodynamically allowed, followed by rapid solidification. The high temperatures allow the system to overcome kinetic barriers found in some ion mixing experiments. Alternatively, surface zone refinement may result from repeated melting-solidification cycles. Ultraviolet laser light couples energy efficiently to the surface of metallic and ceramic materials. The nature of the modification that follows depends on the properties of the surface and substrate materials. Alloying from both gas and predeposited layer sources has been observed in metals, semiconductors, and ceramics as has surface enrichment of Cr by zone refinement of stainless steel. Rapid solidification after melting often results in the formation of nonequilibrium phases, including amorphous materials. Improved surface properties, including tribology and corrosion resistance, are observed in these materials.

  11. Electron beam modification of vanadium dioxide oscillators

    Energy Technology Data Exchange (ETDEWEB)

    Belyaev, Maksim; Velichko, Andrey; Putrolaynen, Vadim; Perminov, Valentin; Pergament, Alexander [Petrozavodsk State University, Petrozavodsk (Russian Federation)

    2017-03-15

    The paper presents the results of a study of electron-beam modification (EBM) of VO{sub 2}-switch I-V curve threshold parameters and the self-oscillation frequency of a circuit containing such a switching device. EBM in vacuum is reversible and the parameters are restored when exposed to air at pressure of 150 Pa. At EBM with a dose of 3 C cm{sup -2}, the voltages of switching-on (V{sub th}) and off (V{sub h}), as well as the OFF-state resistance R{sub off}, decrease down to 50% of the initial values, and the oscillation frequency increases by 30% at a dose of 0.7 C cm{sup -2}. Features of physics of EBM of an oscillator are outlined considering the contribution of the metal and semiconductor phases of the switching channel. Controlled modification allows EBM forming of switches with preset parameters. Also, it might be used in artificial oscillatory neural networks for pattern recognition based on frequency shift keying. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  12. STIFFNESS MODIFICATION OF COTTON IN CHITOSAN TREATMENT

    Directory of Open Access Journals (Sweden)

    CAMPOS Juan

    2017-05-01

    Full Text Available Chitosan is a biopolymer obtained from chitin, and among their most important aspects highlights its applications in a lot of industrial sectors due to its intrinsic properties, especially in the textile sector. In the last years, chitosan is widely used in the cotton and wool finishing processes due to its bond between them and its properties as an antifungical and antimicrobial properties. In this paper three different molecular weight chitosan are used in the finishing process of cotton to evaluate its influence in the surface properties modification. In order to evaluate the effect of the treatment with chitosan, flexural stiffness test is performed in warp and weft direction, and then the total value is calculated. The cotton fabric is treated with 5 g/L of different types of chitosan in an impregnation bath. This study shows the extent of surface properties modification of the cotton provided by three types of chitosan treatment. The results show that all types of chitosan modify the cotton flexural rigidity properties but the one which modifies it in a relevant manner is chitosan originated from shrimps. Chitosan, textile, flexural stiffnes, chitin, cotton.

  13. Posttranslational Modifications and the Immunogenicity of Biotherapeutics

    Directory of Open Access Journals (Sweden)

    Roy Jefferis

    2016-01-01

    Full Text Available Whilst the amino acid sequence of a protein is determined by its gene sequence, the final structure and function are determined by posttranslational modifications (PTMs, including quality control (QC in the endoplasmic reticulum (ER and during passage through the Golgi apparatus. These processes are species and cell specific and challenge the biopharmaceutical industry when developing a production platform for the generation of recombinant biologic therapeutics. Proteins and glycoproteins are also subject to chemical modifications (CMs both in vivo and in vitro. The individual is naturally tolerant to molecular forms of self-molecules but nonself variants can provoke an immune response with the generation of anti-drug antibodies (ADA; aggregated forms can exhibit enhanced immunogenicity and QC procedures are developed to avoid or remove them. Monoclonal antibody therapeutics (mAbs are a special case because their purpose is to bind the target, with the formation of immune complexes (ICs, a particular form of aggregate. Such ICs may be removed by phagocytic cells that have antigen presenting capacity. These considerations may frustrate the possibility of ameliorating the immunogenicity of mAbs by rigorous exclusion of aggregates from drug product. Alternate strategies for inducing immunosuppression or tolerance are discussed.

  14. Heavy flavored jet modification in CMS

    CERN Document Server

    AUTHOR|(CDS)2084335

    2016-01-01

    The energy loss of jets in heavy-ion collisions is expected to depend on the flavor of the fragmenting parton. Thus, measurements of jet quenching as a function of flavor place powerful constraints on the thermodynamical and transport properties of the hot and dense medium. Measurements of the nuclear modification factors of the heavy-flavor-tagged jets (from charm and bottom quarks) in both PbPb and pPb collisions can quantify such energy loss effects. Specifically, pPb measurements provide crucial insights into the behavior of the cold nuclear matter effect, which is required to fully understand the hot and dense medium effects on jets in PbPb collisions. In this talk, we present the heavy flavor jet spectra and measurements of the nuclear modification factors in both PbPb and pPb as a function of transverse momentum and pseudorapidity, using the high statistics pp, pPb and PbPb data taken in 2011 and 2013. Finally, we also will present a proposal for c-jet tagging methodology to be used for the upcoming hi...

  15. Amalyse modifications during production and application

    DEFF Research Database (Denmark)

    Nielsen, Connie

    a-Amylases are a family of enzymes which catalyse the hydrolysis of a-D-(1,4) glucosidic linkages in starch and related compounds. a-Amylases are some of the most important industrial enzymes and they are used in a number of different industries one of these being the detergent industry. The comm......a-Amylases are a family of enzymes which catalyse the hydrolysis of a-D-(1,4) glucosidic linkages in starch and related compounds. a-Amylases are some of the most important industrial enzymes and they are used in a number of different industries one of these being the detergent industry......I value can be identified when analysing the final enzyme product, hereby indicating that the protein is modified. The purpose of the present Ph.D. project is to identify differences between the multiple forms of a-amylase derived from the same gene and determine if or how these various modifications...... affect the activity and wash performance. The focus of the present project is on a-amylases fromBacillus species used in the detergent industry. The thesis begins with an introduction to Bacillus a-amylases, modifications which could cause the multiple forms varying in pI value and mass spectrometry (MS...

  16. Radiation processing technology in Malaysia

    International Nuclear Information System (INIS)

    Khairul Zaman Hj Mohd Dahlan

    2004-01-01

    Radiation processing technology is widely used in industry to enhance efficiency and productivity, improve product quality and competitiveness. Efforts have been made by MINT to expand the application of radiation processing technology for modification of indigenous materials such as natural rubber and rubber based products, palm oil and palm oil based products and polysaccharide into new and high value added products. This paper described MINT experiences on developing products through R and D from the laboratory to the pilot plant stage and commercialization. The paper also explained some issues and challenges that MINT encountered in the process of commercialization of its R and D results. (author)

  17. Biomedical applications using low temperature plasma technology

    International Nuclear Information System (INIS)

    Dai Xiujuan; Jiang Nan

    2006-01-01

    Low temperature plasma technology and biomedicine are two different subjects, but the combination of the two may play a critical role in modern science and technology. The 21 st century is believed to be a biotechnology century. Plasma technology is becoming a widely used platform for the fabrication of biomaterials and biomedical devices. In this paper some of the technologies used for material surface modification are briefly introduced. Some biomedical applications using plasma technology are described, followed by suggestions as to how a bridge between plasma technology and biomedicine can be built. A pulsed plasma technique that is used for surface functionalization is discussed in detail as an example of this kind of bridge or combination. Finally, it is pointed out that the combination of biomedical and plasma technology will be an important development for revolutionary 21st century technologies that requires different experts from different fields to work together. (authors)

  18. Electronic technology

    International Nuclear Information System (INIS)

    Kim, Jin Su

    2010-07-01

    This book is composed of five chapters, which introduces electronic technology about understanding of electronic, electronic component, radio, electronic application, communication technology, semiconductor on its basic, free electron and hole, intrinsic semiconductor and semiconductor element, Diode such as PN junction diode, characteristic of junction diode, rectifier circuit and smoothing circuit, transistor on structure of transistor, characteristic of transistor and common emitter circuit, electronic application about electronic equipment, communication technology and education, robot technology and high electronic technology.

  19. Surface modification of polyethylene by plasma

    International Nuclear Information System (INIS)

    Colin O, E.

    2003-01-01

    The products made of polyethylene (PE) go from construction materials, electric insulating until packing material. The films for bags and pack occupy 83.6% of the distribution of the market of PE approximately. The enormous quantity of PE that is generated by its indiscriminate use brings as consequence a deterioration to the atmosphere, due to the long life that they present as waste. This work is a study on the modification of low density polyethylene films. In this type of thin materials, the changes in the surface meet with largely on the conformation of the rest of the material. To induce changes that modify the surface of PE, plasmas were used with reactive atmospheres of air, oxygen and nitrogen. The experimentation that was carries out went to introduce the PE to a cylindrical reactor where it was generated the plasma of air, oxygen and nitrogen to different times of exposure. After having carried out the exposure to the plasma, it was found that in the polyethylene it modifies their morphology, crystallinity, hydrophobicity, composition and electric conductivity. The analytical techniques that were used to characterize later to the polyethylene of being in contact with the plasma were: X-ray diffraction, Scanning Electron Microscopy, Infrared spectroscopy, Electric conductivity, Angle of contact and finally Thermal Gravimetric Analysis. The content of this work it is presented in five chapters: In the chapter 1 there are presented some general concepts of plasma and of the one polymer in study PE. In the chapter 2 it is made a general revision on modification of surfaces, as well as the properties that were modified in polymeric materials that were exposed to plasma in previous works. In the chapter 3 the experimental part and the conditions used are described in the modification of the PE. Also in this chapter a brief description it is made of the used characterization techniques. The results and discussion are presented in the chapter 4. These results

  20. New technologies in agricultural biotechnology

    Directory of Open Access Journals (Sweden)

    Andras Szekacs

    2016-12-01

    Full Text Available Technologies that emerged during the last decade as new tools occasionally represent fundamentally new means of genome modification, which, in addition to the scientific novelty, faces legislators with new challenge by giving a new meaning to both the biochemical/molecular biological and legal meaning to genetically modified organisms (GMOs. Emerging plant genetic technologies are categorized as zinc finger nuclease (ZFN technology; oligonucleotide directed mutagenesis; cisgenesis and intragenesis; RNA-dependent DNA methylation by RNA interference; grafting on GM rootstock; reverse breeding; agro-infiltration; and synthetic genomics. Although all these methods apply biotechnology processes to create new plant varieties, it debated whether all result in GMOs according to the current legal definition. Official risk assessment of these technologies is a task of outstanding weight of the authority.

  1. A modification of the Oersted experiment

    Energy Technology Data Exchange (ETDEWEB)

    Stoyanov, Dimitar G [Sliven Engineering and Pedagogical Faculty, Sofia Technical University, 59 Burgasko Shosse Blvd, 8800 Sliven (Bulgaria)], E-mail: dgstoyanov@abv.bg

    2009-05-15

    The paper describes a simple set-up of the Oersted experiment. A planar coil of wires has been used to deflect vigorously the magnetic needle (more than 80 angular degrees) when a current of up to 1 A flows along it. Based on theoretical analysis the torque on the magnetic field is analytically expressed taking into account the inhomogeneity of the field and the needle shape. This modification of the Oersted experiment can be used as an easily-made and low-cost set-up or a laboratory workshop at the undergraduate level. Moreover, a procedure to measure the Earth's magnetic component is implied and implemented and its magnitude has been estimated following the same steps.

  2. Controller modification applied for active fault detection

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik; Stoustrup, Jakob; Poulsen, Niels Kjølstad

    2014-01-01

    This paper is focusing on active fault detection (AFD) for parametric faults in closed-loop systems. This auxiliary input applied for the fault detection will also disturb the external output and consequently reduce the performance of the controller. Therefore, only small auxiliary inputs are used...... with the result that the detection and isolation time can be long. In this paper it will be shown, that this problem can be handled by using a modification of the feedback controller. By applying the YJBK-parameterization (after Youla, Jabr, Bongiorno and Kucera) for the controller, it is possible to modify...... the frequency for the auxiliary input is selected. This gives that it is possible to apply an auxiliary input with a reduced amplitude. An example is included to show the results....

  3. Modification of graphene by ion irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Bukowska, Hanna; Akcoeltekin, Sevilay; El Kharrazi, Mourad; Schleberger, Marika [Universitaet Duisburg-Essen, Fakultaet fuer Physik, Duisburg (Germany); Osmani, Orkhan [Universitaet Duisburg-Essen, Fakultaet fuer Physik, Duisburg (Germany); Technische Universitaet Kaiserslautern, Fachbereich Physik, Gottlieb-Daimler-Strasse, Gebaeude 47, 67663 Kaiserslautern (Germany)

    2010-07-01

    Ion irradiation can be used to modify surfaces on the nanometer scale. We investigate graphene on different insulator (SrTiO{sub 3}, TiO{sub 2}, and Al{sub 2}O{sub 3}) and semiconductor (SiO{sub 2}) substrates. The bombardment of those target surfaces with swift heavy ions under grazing angle of incidence creates chains of nanodots on the substrate and folds graphene to typical origami-like structures. The shape of the folded graphene seems to depend on the length of the tracks. The length can be controlled by the angle of incidence. From the analysis of atomic force microscopy measurements, we classify the different types of modifications, with the aim to determine the relationship between chain length and origami shape. Further more we want to develop a theoretical understanding of the physical processes leading to the folding.

  4. Autoantibodies to Posttranslational Modifications in Rheumatoid Arthritis

    Science.gov (United States)

    Burska, Agata N.; Hunt, Laura; Strollo, Rocky; Ryan, Brent J.; Vital, Ed; Nissim, Ahuva; Winyard, Paul G.; Emery, Paul; Ponchel, Frederique

    2014-01-01

    Autoantibodies have been associated with human pathologies for a long time, particularly with autoimmune diseases (AIDs). Rheumatoid factor (RF) is known since the late 1930s to be associated with rheumatoid arthritis (RA). The discovery of anticitrullinated protein antibodies in the last century has changed this and other posttranslational modifications (PTM) relevant to RA have since been described. Such PTM introduce neoepitopes in proteins that can generate novel autoantibody specificities. The recent recognition of these novel specificities in RA provides a unique opportunity to understand human B-cell development in vivo. In this paper, we will review the three of the main classes of PTMs already associated with RA: citrullination, carbamylation, and oxidation. With the advancement of research methodologies it should be expected that other autoantibodies against PTM proteins could be discovered in patients with autoimmune diseases. Many of such autoantibodies may provide significant biomarker potential. PMID:24782594

  5. Genetic modification of stem cells for transplantation.

    Science.gov (United States)

    Phillips, M Ian; Tang, Yao Liang

    2008-01-14

    Gene modification of cells prior to their transplantation, especially stem cells, enhances their survival and increases their function in cell therapy. Like the Trojan horse, the gene-modified cell has to gain entrance inside the host's walls and survive and deliver its transgene products. Using cellular, molecular and gene manipulation techniques the transplanted cell can be protected in a hostile environment from immune rejection, inflammation, hypoxia and apoptosis. Genetic engineering to modify cells involves constructing modules of functional gene sequences. They can be simple reporter genes or complex cassettes with gene switches, cell specific promoters and multiple transgenes. We discuss methods to deliver and construct gene cassettes with viral and non-viral delivery, siRNA, and conditional Cre/Lox P. We review the current uses of gene-modified stem cells in cardiovascular disease, diabetes, neurological diseases, (including Parkinson's, Alzheimer's and spinal cord injury repair), bone defects, hemophilia, and cancer.

  6. Materials Modification Under Ion Irradiation: JANNUS Project

    International Nuclear Information System (INIS)

    Serruys, Y.; Trocellier, P.; Ruault, M.-O.; Henry, S.; Kaietasov, O.; Trouslard, Ph.

    2004-01-01

    JANNUS (Joint Accelerators for Nano-Science and Nuclear Simulation) is a project designed to study the modification of materials using multiple ion beams and in-situ TEM observation. It will be a unique facility in Europe for the study of irradiation effects, the simulation of material damage due to irradiation and in particular of combined effects. The project is also intended to bring together experimental and modelling teams for a mutual fertilisation of their activities. It will also contribute to the teaching of particle-matter interactions and their applications. JANNUS will be composed of three accelerators with a common experimental chamber and of two accelerators coupled to a 200 kV TEM

  7. FRX-C Large Source Modification

    International Nuclear Information System (INIS)

    Chrien, R.E.; Tuszewski, M.; Yavornik, E.J.

    1985-01-01

    The FRX-C Large Source Modification (LSM) consists of a larger discharge tube and a larger radius coil connected to the existing FRX-C collector plates and capacitor banks. The objectives of LSM are to (1) study the size dependences of processes governing FRC formation and poloidal flux trapping in order to improve the design of larger field-reversed theta pinch devices, (2) increase the parameter s (number of local ion gyroradii between the field null and separatrix) to seek access to predicted new regimes of improved confinement and possible instability, (3) search for evidence of internal tilt instability at higher values of s where the mode is predicted to grow more rapidly, and (4) observe the effect of s and larger size on FRC confinement. In this paper we will discuss the construction of LSM, the experimental plan, and preliminary experimental results

  8. Enzymatic Modification of Plant Cell Wall Polysaccharides

    DEFF Research Database (Denmark)

    Øbro, Jens; Hayashi, Takahisa; Mikkelsen, Jørn Dalgaard

    2011-01-01

    Plant cell walls are intricate structures with remarkable properties, widely used in almost every aspect of our life. Cell walls consist largely of complex polysaccharides and there is often a need for chemical and biochemical processing before industrial use. There is an increasing demand...... for sustainable processes that replace chemical treatments with white biotechnology. Plants can contribute significantly to this sustainable process by producing plant or microbialenzymes in planta that are necessary for plant cell wall modification or total degradation. This will give rise to superior food...... fibres, hydrocolloids, paper,textile, animal feeds or biofuels. Classical microbial-based fermentation systems could in the future face serious competition from plant-based expression systems for enzyme production. Plant expressed enzymes can either be targeted to specific cellular compartments...

  9. Fault diagnosis based on controller modification

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik

    2015-01-01

    Detection and isolation of parametric faults in closed-loop systems will be considered in this paper. A major problem is that a feedback controller will in general reduce the effects from variations in the systems including parametric faults on the controlled output from the system. Parametric...... faults can be detected and isolated using active methods, where an auxiliary input is applied. Using active methods for the diagnosis of parametric faults in closed-loop systems, the amplitude of the applied auxiliary input need to be increased to be able to detect and isolate the faults in a reasonable......-parameterization (after Youla, Jabr, Bongiorno and Kucera) for the controller, it is possible to modify the feedback controller with a minor effect on the closed-loop performance in the fault-free case and at the same time optimize the detection and isolation in a faulty case. Controller modification in connection...

  10. Epigenetic Modifications of Major Depressive Disorder

    Directory of Open Access Journals (Sweden)

    Kathleen Saavedra

    2016-08-01

    Full Text Available Major depressive disorder (MDD is a chronic disease whose neurological basis and pathophysiology remain poorly understood. Initially, it was proposed that genetic variations were responsible for the development of this disease. Nevertheless, several studies within the last decade have provided evidence suggesting that environmental factors play an important role in MDD pathophysiology. Alterations in epigenetics mechanism, such as DNA methylation, histone modification and microRNA expression could favor MDD advance in response to stressful experiences and environmental factors. The aim of this review is to describe genetic alterations, and particularly altered epigenetic mechanisms, that could be determinants for MDD progress, and how these alterations may arise as useful screening, diagnosis and treatment monitoring biomarkers of depressive disorders.

  11. A study of microbial profile modification

    Energy Technology Data Exchange (ETDEWEB)

    Bae, J.H.; Lee, H.O.

    1995-12-31

    A microbial profile modification method using spores was investigated. A halotolerant, spore-forming, biopolymer-producing mesophile was used in Berea cores with a specifically formulated nutrient package to reduce the permeability of the rock. The degree of permeability reduction varied widely depending on the stimulation protocols used. The incubation period had a significant impact on permeability reduction, and there appeared to be an optimum incubation time for maximum permeability reduction. The reduction persisted for many PV of brine injection and appeared very stable. For our microbes used in this study, the permeability reduction was about the same when the NaCl concentration was above 2 wt% in the range from 0 wt% to 10 wt%.

  12. Functionalization and modification of carbon nanomaterials

    Energy Technology Data Exchange (ETDEWEB)

    Diachkova, Tatyana P.; Tkachev, Alexey G.; Orlova, Nataliya V.; Orlov, Andrej Yu. [Tambov State Technical University, Tambov (Russian Federation)

    2013-07-01

    Some regularities of covalent functionalization multiwalled carbon nanotubes (MWCNTs) by oxygen- containing groups were studied. The resulting materials were characterized by electron microscopy, thermogravimetric analysis, FTIR and Raman spectroscopy. The dependence of the degree of functionalization of MWCNTs from the process conditions was stated. The advantages of the gas phase to the liquid phase oxidation were shown. The effect of pristine and functionalized MWCNTs on the properties of composites with polysulfone was studied. Pristine and functionalized MWCNTs were modified with polyaniline. The effect of the method and degree of pre-functionalization of carbon nanotubes on the regularities of the oxidative polymerization of aniline and the properties of the obtained materials was shown. Key words: multiwalled carbon nanotubes, functionalization, modification, oxidation, composites, polyaniline.

  13. Cell Signalling Through Covalent Modification and Allostery

    Science.gov (United States)

    Johnson, Louise N.

    Phosphorylation plays essential roles in nearly every aspect of cell life. Protein kinases catalyze the transfer of the γ-phosphate of ATP to a serine, threonine or tyrosine residue in protein substrates. This covalent modification allows activation or inhibition of enzyme activity, creates recognition sites for other proteins and promotes order/disorder or disorder/order transitions. These properties regulate ­signalling pathways and cellular processes that mediate metabolism, transcription, cell cycle progression, differentiation, cytoskeleton arrangement and cell movement, apoptosis, intercellular communication, and neuronal and immunological functions. In this lecture I shall review the structural consequences of protein phosphorylation using our work on glycogen phosphorylase and the cell cycle cyclin dependent protein kinases as illustrations. Regulation of protein phosphorylation may be disrupted in the diseased state and protein kinases have become high profile targets for drug development. To date there are 11 compounds that have been approved for clinical use in the treatment of cancer.

  14. Survey of Enabling Technologies for CAPS

    Science.gov (United States)

    Antol, Jeffrey; Mazanek, Daniel D.; Koons, Robert H.

    2005-01-01

    The enabling technologies required for the development of a viable Comet/Asteroid Protection System (CAPS) can be divided into two principal areas: detection and deflection/orbit modification. With the proper funding levels, many of the technologies needed to support a CAPS architecture could be achievable within the next 15 to 20 years. In fact, many advanced detection technologies are currently in development for future in-space telescope systems such as the James Webb Space Telescope (JWST), formerly known as the Next Generation Space Telescope. It is anticipated that many of the JWST technologies would be available for application for CAPS detection concepts. Deflection/orbit modification technologies are also currently being studied as part of advanced power and propulsion research. However, many of these technologies, such as extremely high-output power systems, advanced propulsion, heat rejection, and directed energy systems, would likely be farther term in availability than many of the detection technologies. Discussed subsequently is a preliminary examination of the main technologies that have been identified as being essential to providing the element functionality defined during the CAPS conceptual study. The detailed requirements for many of the technology areas are still unknown, and many additional technologies will be identified as future in-depth studies are conducted in this area.

  15. Sleep modifications in acute transient global amnesia.

    Science.gov (United States)

    Della Marca, Giacomo; Mazza, Marianna; Losurdo, Anna; Testani, Elisa; Broccolini, Aldobrando; Frisullo, Giovanni; Marano, Giuseppe; Morosetti, Roberta; Pilato, Fabio; Profice, Paolo; Vollono, Catello; Di Lazzaro, Vincenzo

    2013-09-15

    Transient global amnesia (TGA) is a temporary memory loss characterized by an abrupt onset of antero-grade and retrograde amnesia, totally reversible. Since sleep plays a major role in memory consolidation, and in the storage of memory-related traces into the brain cortex, the aims of the present study were: (1) to evaluate changes in sleep macro-structure in TGA; (2) to assess modifications in sleep micro-structure in TGA, with particular reference to the arousal EEG and to cyclic alternating pattern (CAP); (3) to compare sleep parameters in TGA patients with a control group of patients with acute ischemic events ("minor stroke" or transient ischemic attack [TIA]) clinically and neuroradiologically "similar" to the TGA. TGA GROUP: 17 patients, (8 men and 9 women, 60.2 ± 12.5 years). Stroke or TIA (SoT) group: 17 patients hospitalized in the Stroke Unit for recent onset of minor stroke or TIA with hemispheric localization; healthy controls (HC) group: 17 healthy volunteers, matched for age and sex. Patients and controls underwent full-night polysomnography. In the multivariate analysis (conditions TGA, SoT, and HC) a significant effect of the condition was observed for sleep efficiency index, number of awakenings longer 1 min, REM latency, CAP time, and CAP rate. TGA and SoT differed only for CAP time and CAP rate, which were lower in the TGA group. Microstructural modification associated with tga could be consequent to: (1) hippocampal dysfunction and memory impairment; (2) impairment of arousal-related structures (in particular, cholinergic pathways); (3) emotional distress.

  16. Safety of modifications at nuclear power plants - the role of minor modifications and human and organisational factors

    International Nuclear Information System (INIS)

    2005-01-01

    Operating experience repeatedly shows that changes and modifications at nuclear power plants (NPPs) may lead to safety significant events. At the same time, modifications are necessary to ensure a safe and economic functioning of the NPPs. To ensure safety in all plant configurations it is important that modification processes are given proper attention both by the utilities and the regulators. The operability, maintainability and testability of every modification should be thoroughly assessed from different points of view to ensure that no safety problems are introduced. The OECD/NEA Committee on Safety of Nuclear Installations (CSNI) has recently addressed the issue of modifications by organising a 'Workshop on Modifications at Nuclear Power Plants Operating Experience, Safety Significance and Role of Human Factors'. This workshop was undertaken as a joint effort of the Working Group on Operating Experience (WGOE) and the Special Experts Group on Human and Organisational Factors (SEGHOF), and it was held at the OECD Headquarters in Paris on October 6 to 8, 2003. The initiative to organise the workshop was taken by the WGOE and the SEGHOF based on findings from events and incidents due to modifications at nuclear power plants in the world and weaknesses experienced in modification processes. During the workshop, the WGOE focused on the theme of 'Minor Modifications and their Safety Significance', while the SEGHOF focused on the topic 'Human and Organisational Factors in NPP Modifications'. This report is based on material collected before the workshop, the workshop proceedings, discussions of the group of experts responsible for the arrangement of the workshop, and additional material collected by a consultant. The workshop was preceded by extensive preparations, which included collection of national surveys in response to questionnaires on modifications at the NPPs. Not all of these surveys were available at the workshop, but their findings have now been included

  17. Technical Modification Within the Healthcare Industry: Improving Both the Efficacy of the National Drug Code Carrier and the Accessibility of Electronic Health Records to Reduce Adverse Drug Events

    Science.gov (United States)

    2013-06-01

    with an EHR .................................................. 97 C. SWOT ANALYSIS OF USING QR CODES WITH THE NDC AND WITH EHRS...96 Figure 41. SWOT analysis ................................................................................... 99 xiii LIST OF...having an EHR provides a more robust overall solution. C. SWOT ANALYSIS OF USING QR CODES WITH THE NDC AND WITH EHRS In order to conduct an

  18. Surface modification of ceramics. Ceramics no hyomen kaishitsu

    Energy Technology Data Exchange (ETDEWEB)

    Hioki, T. (Toyota Central Research and Development Labs., Inc., Nagoya (Japan))

    1993-07-05

    Surface modification of ceramics and some study results using in implantation in surface modification are introduced. The mechanical properties (strength, fracture toughness, flaw resistance) of ceramics was improved and crack was repaired using surface modification by ion implantation. It is predicted that friction and wear properties are considerably affected because the hardness of ceramics is changed by ion implantation. Cementing and metalization are effective as methods for interface modification and the improvement of the adhesion power of the interface between metal and ceramic is their example. It was revealed that the improvement of mechanical properties of ceramics was achieved if appropriate surface modification was carried out. The market of ceramics mechanical parts is still small, therefore, the present situation is that the field of activities for surface modification of ceramics is also narrow. However, it is thought that in future, ceramics use may be promoted surely in the field like medicine and mechatronics. 8 refs., 4 figs.

  19. Mapping Base Modifications in DNA by Transverse-Current Sequencing

    Science.gov (United States)

    Alvarez, Jose R.; Skachkov, Dmitry; Massey, Steven E.; Kalitsov, Alan; Velev, Julian P.

    2018-02-01

    Sequencing DNA modifications and lesions, such as methylation of cytosine and oxidation of guanine, is even more important and challenging than sequencing the genome itself. The traditional methods for detecting DNA modifications are either insensitive to these modifications or require additional processing steps to identify a particular type of modification. Transverse-current sequencing in nanopores can potentially identify the canonical bases and base modifications in the same run. In this work, we demonstrate that the most common DNA epigenetic modifications and lesions can be detected with any predefined accuracy based on their tunneling current signature. Our results are based on simulations of the nanopore tunneling current through DNA molecules, calculated using nonequilibrium electron-transport methodology within an effective multiorbital model derived from first-principles calculations, followed by a base-calling algorithm accounting for neighbor current-current correlations. This methodology can be integrated with existing experimental techniques to improve base-calling fidelity.

  20. On the genetic modification of psychology, personality, and behavior.

    Science.gov (United States)

    Neitzke, Alex B

    2012-12-01

    I argue that the use of heritable modifications for psychology, personality, and behavior should be limited to the reversal or prevention of relatively unambiguous instances of pathology or likely harm (e.g. sociopathy). Most of the likely modifications of psychological personality would not be of this nature, however, and parents therefore should not have the freedom to make such modifications to future children. I argue by examining the viewpoints of both the individual and society. For individuals, modifications would interfere with their capacity for self-determination in a way that undermines the very concept of self-determination. I argue that modification of psychology and personality is unlike present parenting in morally significant ways. For society, modification offers a medium for power to manipulate the makeup of persons and populations, possibly causing biological harm to the species and altering our conceptions of social responsibility.

  1. Mechanisms of behavior modification in clinical behavioral medicine in China.

    Science.gov (United States)

    Yang, Zhiyin; Su, Zhonghua; Ji, Feng; Zhu, Min; Bai, Bo

    2014-08-01

    Behavior modification, as the core of clinical behavioral medicine, is often used in clinical settings. We seek to summarize behavior modification techniques that are commonly used in clinical practice of behavioral medicine in China and discuss possible biobehavioral mechanisms. We reviewed common behavior modification techniques in clinical settings in China, and we reviewed studies that explored possible biobehavioral mechanisms. Commonly used clinical approaches of behavior modification in China include behavior therapy, cognitive therapy, cognitive-behavioral therapy, health education, behavior management, behavioral relaxation training, stress management intervention, desensitization therapy, biofeedback therapy, and music therapy. These techniques have been applied in the clinical treatment of a variety of diseases, such as chronic diseases, psychosomatic diseases, and psychological disorders. The biobehavioral mechanisms of these techniques involve the autonomic nervous system, neuroendocrine system, neurobiochemistry, and neuroplasticity. Behavior modification techniques are commonly used in the treatment of a variety of somatic and psychological disorders in China. Multiple biobehavioral mechanisms are involved in successful behavior modification.

  2. An Assessment of Radiation Modification from a European Perspective

    Science.gov (United States)

    Kristjansson, J. E.; Lawrence, M. G.; Boucher, O.; Haywood, J. M.; Irvine, P. J.; Muri, H.; Schmidt, H.; Schulz, M.; Vaughan, N.; Watson, M.; Born, W.; Schaefer, S.; Stelzer, H.

    2014-12-01

    The European Transdisciplinary Assessment of Climate Engineering (EuTRACE) project (2012-2014) is funded by the European Commission (EC). In EuTRACE, researchers from the natural sciences, social sciences and the humanities have joined forces to assess various proposed geoengineering techniques concerning their radiative forcing potential and side effects, ethical aspects, economics aspects, as well as governance and regulation aspects. A comprehensive assessment report will be submitted to the EC in autumn 2014. We will present some highlights of the part of the EuTRACE assessment that deals with the natural science aspects of proposed Radiation Modification (RM) techniques. The techniques considered are: a) Stratospheric Sulfur Injections; b) Marine Cloud Brightening; c) Desert Brightening; d) Vegetation Brightening; and e) Cirrus Cloud Thinning. A large number of publications in the scientific literature has been considered, as well as recently published assessment reports by the Royal Society in the UK and the German Federal Ministry of Education and Research. Some of the findings of the assessment are: Globally averaged, the current anthropogenic radiative forcing could conceivably be offset by the RM techniques considered. The RM techniques could have a significant global effect already after 1 year or less. Model simulations consistently show that Solar RM leads to regional imbalances due to different spatial footprints of solar and carbon dioxide radiative forcings. This may have significant consequences for precipitation patterns and the hydrological cycle. Very rapid warming is virtually certain if RM were to be stopped abruptly or over a period of one to a few years. Model studies of RM usually assume that the techniques are technologically feasible. In fact, the technological challenges are poorly known, and in many cases the physical processes involved are poorly understood. We will end by discussing key research questions and knowledge gaps.

  3. Chemical Modification of Semiconductor Surfaces for Molecular Electronics.

    Science.gov (United States)

    Vilan, Ayelet; Cahen, David

    2017-03-08

    Inserting molecular monolayers within metal/semiconductor interfaces provides one of the most powerful expressions of how minute chemical modifications can affect electronic devices. This topic also has direct importance for technology as it can help improve the efficiency of a variety of electronic devices such as solar cells, LEDs, sensors, and possible future bioelectronic ones. The review covers the main aspects of using chemistry to control the various aspects of interface electrostatics, such as passivation of interface states and alignment of energy levels by intrinsic molecular polarization, as well as charge rearrangement with the adjacent metal and semiconducting contacts. One of the greatest merits of molecular monolayers is their capability to form excellent thin dielectrics, yielding rich and unique current-voltage characteristics for transport across metal/molecular monolayer/semiconductor interfaces. We explain the interplay between the monolayer as tunneling barrier on the one hand, and the electrostatic barrier within the semiconductor, due to its space-charge region, on the other hand, as well as how different monolayer chemistries control each of these barriers. Practical tools to experimentally identify these two barriers and distinguish between them are given, followed by a short look to the future. This review is accompanied by another one, concerning the formation of large-area molecular junctions and charge transport that is dominated solely by molecules.

  4. Surface modification of biomaterials and biomedical devices using additive manufacturing.

    Science.gov (United States)

    Bose, Susmita; Robertson, Samuel Ford; Bandyopadhyay, Amit

    2018-01-15

    The demand for synthetic biomaterials in medical devices, pharmaceutical products and, tissue replacement applications are growing steadily due to aging population worldwide. The use for patient matched devices is also increasing due to availability and integration of new technologies. Applications of additive manufacturing (AM) or 3D printing (3DP) in biomaterials have also increased significantly over the past decade towards traditional as well as innovative next generation Class I, II and III devices. In this review, we have focused our attention towards the use of AM in surface modified biomaterials to enhance their in vitro and in vivo performances. Specifically, we have discussed the use of AM to deliberately modify the surfaces of different classes of biomaterials with spatial specificity in a single manufacturing process as well as commented on the future outlook towards surface modification using AM. It is widely understood that the success of implanted medical devices depends largely on favorable material-tissue interactions. Additive manufacturing has gained traction as a viable and unique approach to engineered biomaterials, for both bulk and surface properties that improve implant outcomes. This review explores how additive manufacturing techniques have been and can be used to augment the surfaces of biomedical devices for direct clinical applications. Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  5. Facile modification of electrospun fibrous structures with antifouling zwitterionic hydrogels.

    Science.gov (United States)

    Xu, Tong; Yang, Jing; Zhang, Jiamin; Zhu, Yingnan; Li, Qingsi; Pan, Chao; Zhang, Lei

    2017-12-28

    Electrospinning technology can easily produce different shaped fibrous structures, making them highly valuable to various biomedical applications. However, surface contamination of biomolecules, cells, or blood has emerged as a significant challenge to the success of electrospun devices, especially artificial blood vessels, catheters and wound dressings etc. Many efforts have been made to resist the surface non-specific biomolecules or cells adsorption, but most of them require complex pre-treatment processes, hard-to-remove metal catalysts or rigorous reaction conditions. In addition, the stability of antifouling coatings, especially in complex conditions, is still a major concern. In this work, inspired by the interpenetrating polymer network and reinforced concrete structure, an efficient and facile strategy for modifying hydrophobic electrospun meshes and tubes with antifouling zwitterionic hydrogels has been introduced. The resulting products could efficiently resist the adhesion of proteins, cells, or even fresh whole blood. Meanwhile, they could maintain the shapes and mechanical strength of the original electrospun structures. Furthermore, the hydrogel structures could retain stable in a physiological condition for at least 3 months. This paper provided a general antifouling and hydrophilicity surface modification strategy for various fibrous structures, and could be of great value for many biomedical applications where antifouling properties are critical.

  6. Electrostatic bio-manipulation for the modification of cellular functions

    International Nuclear Information System (INIS)

    Washizu, Masao

    2013-01-01

    The use of electrostatic field effects, including field-induced reversible-breakdown of the membrane and dielectrophoresis (DEP), in microfabricated structures are investigated. With the use of field constriction created by a micro-orifice whose diameter is smaller than the cells, controlled magnitude of pulsed voltage can be applied across the cell membrane regardless of the cell size, shape or orientation. As a result, the breakdown occurs reproducibly and with minimal invasiveness. The breakdown is used for two purposes, electroporation by which foreign substances can be fed into cells, and electrofusion which creates genetic and/or cytoplasmic mixture among two cells. When GFP plasmid is fed into MSC cell, the gene expression started within 2 hours, and finally observed in more than 50% of cells. For cell fusion, several ten percent fusion yield is achieved for most cell types, with the colony formation in several percents. Timing-controlled feeding foreign substances or mixing cellular contents, with high-yield and low-invasiveness, is expected to bring about a new technology for both genetic and epigenetic modifications of cellular functions, in such field as regenerative medicine.

  7. Evaluation and Modification of Processes for Bioethanol Separation and Production

    Directory of Open Access Journals (Sweden)

    Johnner P Sitompul

    2012-04-01

    Full Text Available This paper concerns on process evaluation and modification for bioethanol separation and production by applying pinch technology. Further, the paper is also focused on obtaining a most energy-efficient process among several processes. Three basic process configurations of bioethanol separation and production were selected for this study. The three separations and production systems are Othmer process, Barbet process and a separation process that operates under vacuum condition. Basically, each process is combination of Danish Distilleries process with a separation system yielding 95% (v/v bioethanol. The production capacity of the plant is estimated about 4 x 107 litre of bioethanol 95% (v/v per year. The result of the studies shows that the most energy efficient process among the three processes evaluated is the Othmer process, followed by the Barbet process and the process involving vacuum operation. The evaluation also shows that further energy saving can be carried for Barbet and Othmer process configuration when Tmin = 10oC for heat exchange possible.

  8. Surface modification of materials by ion implantations for industrial and medical applications. Final report of a co-ordinated research project

    International Nuclear Information System (INIS)

    2000-07-01

    The objectives of the Co-ordinated Research Project on Modification of Materials by Ion Treatment for Industrial Applications were to develop economically acceptable surface modification techniques leading to thick treated layers, to predict ion beam mixing and impurity atom migration during and after implantation, and to evaluate the tribological post-implantation properties and performance of treated components. This TECDOC summarises the current status and prospects in surface modification by ion implantation methodology and technology, providing new information in basic and applied research

  9. Surface modification of materials by ion implantations for industrial and medical applications. Final report of a co-ordinated research project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The objectives of the Co-ordinated Research Project on Modification of Materials by Ion Treatment for Industrial Applications were to develop economically acceptable surface modification techniques leading to thick treated layers, to predict ion beam mixing and impurity atom migration during and after implantation, and to evaluate the tribological post-implantation properties and performance of treated components. This TECDOC summarises the current status and prospects in surface modification by ion implantation methodology and technology, providing new information in basic and applied research.

  10. Technology Acceptance Model: A Survey of Literature

    Directory of Open Access Journals (Sweden)

    Priyanka Surendran

    2013-07-01

    Full Text Available The technology acceptance model has been a theory that is most widely used to explain an individual’s acceptance of an information system. This study has reviewed numerous literatures available in this area. The different studies in this area were evaluated to understand the modifications that were done on this model. The paper then tries to provide an insight on future trends in the technology acceptance model.

  11. Review of Trenchless Technologies' Successes and their ...

    African Journals Online (AJOL)

    ... costly construction modifications, and use of substandard borrow material, environmental damage to the site, post construction remedial work, and even failure of a structure and subsequent litigation. Trenchless technology can be defined as the use of construction methods to install and repair underground infrastructure ...

  12. Medium Modifications of Hadrons in Photon Induced Reactions

    International Nuclear Information System (INIS)

    Schadmand, S.

    2004-01-01

    Indications for in-medium modifications of hadron properties are reported from photoabsorption and meson production experiments. Strong medium modifications are observed in inclusive photoabsorption experiments and theoretical models investigate the in-medium dynamics of baryon resonances and their coupling to mesons. Recent experiments study the in-medium behavior of scalar and vector mesons where theoretical models expect in-medium modifications of the meson spectral functions that might be connected to partial restoration of chiral symmetry

  13. Functional Modification of Thioether Groups in Peptides, Polypeptides, and Proteins

    OpenAIRE

    Deming, TJ

    2017-01-01

    Recent developments in the modification of methionine and other thioether-containing residues in peptides, polypeptides, and proteins are reviewed. Properties and potential applications of the resulting functionalized products are also discussed. While much of this work is focused on natural Met residues, modifications at other side-chain residues have also emerged as new thioether-containing amino acids have been incorporated into peptidic materials. Functional modification of thioether-cont...

  14. Modification of JRR-4 based on safety evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Izumo, Hironobu; Nakajima, Teruo; Funayama, Yoshiro [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1998-10-01

    Since the first criticality was achieved on January 28, 1965, JRR-4 has been operated safely until on January 12, 1996. The modification of JRR-4 was planned according to the framework of reduced enrichment on research reactor program. The modification was designed based on the several national safety guides. JRR-4 has some modifications of facilities to satisfy the guides and guides criteria. (author)

  15. Pnp gene modification for improved xylose utilization in Zymomonas

    Science.gov (United States)

    Caimi, Perry G G; Qi, Min; Tao, Luan; Viitanen, Paul V; Yang, Jianjun

    2014-12-16

    The endogenous pnp gene encoding polynucleotide phosphorylase in the Zymomonas genome was identified as a target for modification to provide improved xylose utilizing cells for ethanol production. The cells are in addition genetically modified to have increased expression of ribose-5-phosphate isomerase (RPI) activity, as compared to cells without this genetic modification, and are not limited in xylose isomerase activity in the absence of the pnp modification.

  16. Environmental science and technology

    International Nuclear Information System (INIS)

    2014-01-01

    The Program on Environmental Science and Technology developed at the Chemical and Environmental Technology Center comprehends environmental chemistry (water, soil and atmospheric chemistry), clean technologies (desulfurization of diesel and oil, biodegradable polymers and structural modification of polymers, recycling, pyrolysis of dangerous chemicals by molten salt technology), nanotechnology (magnetic nanoparticles, dendrimers, nano biomarkers, catalysts) and chemical characterization of nuclear fuel and nuclear fuel cycle waste (chemical and isotopic characterization). The Chemical and Environmental Technology Center was established in 1995, as an evolution of the former Department of Chemistry Engineering (1970). The program on environment science and technology was structured as consequence of the continuous growth of environmental activities on areas related to nuclear programs of IPEN. Moreover, it was an answer to the society concerning the climate changes and biodiversity preservation. All activities of research and development, services, supervision of graduate and under graduated students and courses performance at the center were related to the development, improvement and establishment of new technologies. The highlights of this period (2011 - 2013) were: - Development and use of modern analytical technology for the characterization of persistent pollutants and endocrine disrupters (metals, PAHA’s, PCBs, Pesticides, hormones, surfactants, plasticizer and human pharmaceuticals) in order to evaluate water quality and/or sediments; - Atmospheric chemistry and greenhouse gases: Evaluating an estimation of surface trace gas fluxes from aircraft measurements above the Amazon; - Cooperation with SABESP (Water and Sewage Company) and CETESB (State Environment Agency) in program for the development of public policies; - Studies and development in biodegradable polymers, polyolefins and advanced methods for polymer and rubber recycling and re-use; - Studies

  17. Environmental science and technology

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-07-01

    The Program on Environmental Science and Technology developed at the Chemical and Environmental Technology Center comprehends environmental chemistry (water, soil and atmospheric chemistry), clean technologies (desulfurization of diesel and oil, biodegradable polymers and structural modification of polymers, recycling, pyrolysis of dangerous chemicals by molten salt technology), nanotechnology (magnetic nanoparticles, dendrimers, nano biomarkers, catalysts) and chemical characterization of nuclear fuel and nuclear fuel cycle waste (chemical and isotopic characterization). The Chemical and Environmental Technology Center was established in 1995, as an evolution of the former Department of Chemistry Engineering (1970). The program on environment science and technology was structured as consequence of the continuous growth of environmental activities on areas related to nuclear programs of IPEN. Moreover, it was an answer to the society concerning the climate changes and biodiversity preservation. All activities of research and development, services, supervision of graduate and under graduated students and courses performance at the center were related to the development, improvement and establishment of new technologies. The highlights of this period (2011 - 2013) were: - Development and use of modern analytical technology for the characterization of persistent pollutants and endocrine disrupters (metals, PAHA’s, PCBs, Pesticides, hormones, surfactants, plasticizer and human pharmaceuticals) in order to evaluate water quality and/or sediments; - Atmospheric chemistry and greenhouse gases: Evaluating an estimation of surface trace gas fluxes from aircraft measurements above the Amazon; - Cooperation with SABESP (Water and Sewage Company) and CETESB (State Environment Agency) in program for the development of public policies; - Studies and development in biodegradable polymers, polyolefins and advanced methods for polymer and rubber recycling and re-use; - Studies

  18. Functional Modification of Thioether Groups in Peptides, Polypeptides, and Proteins.

    Science.gov (United States)

    Deming, Timothy J

    2017-03-15

    Recent developments in the modification of methionine and other thioether-containing residues in peptides, polypeptides, and proteins are reviewed. Properties and potential applications of the resulting functionalized products are also discussed. While much of this work is focused on natural Met residues, modifications at other side-chain residues have also emerged as new thioether-containing amino acids have been incorporated into peptidic materials. Functional modification of thioether-containing amino acids has many advantages and is a complementary methodology to the widely utilized methods for modification at cysteine residues.

  19. Investigation of the Bitumen Modification Process Regime Parameters Influence on Polymer-Bitumen Bonding Qualitative Indicators

    Science.gov (United States)

    Belyaev, P. S.; Mishchenko, S. V.; Belyaev, V. P.; Belousov, O. A.; Frolov, V. A.

    2018-04-01

    The objects of this study are petroleum road bitumen and polymeric bituminous binder for road surfaces obtained by polymer materials. The subject of the study is monitoring the polymer-bitumen binder quality changes as a result of varying the bitumen modification process. The purpose of the work is to identify the patterns of the modification process and build a mathematical model that provides the ability to calculate and select technological equipment. It is shown that the polymer-bitumen binder production with specified quality parameters can be ensured in apparatuses with agitators in turbulent mode without the colloidal mills use. Bitumen mix and modifying additives limiting indicators which can be used as restrictions in the form of mathematical model inequalities are defined. A mathematical model for the polymer-bitumen binder preparation has been developed and its adequacy has been confirmed.

  20. Process of Judging Significant Modifications for Different Transportation Systems compared to the Approach for Nuclear Installations

    Directory of Open Access Journals (Sweden)

    Nicolas Petrek

    2015-12-01

    Full Text Available The implementation of the CSM regulation by the European Commission in 2009 which harmonizes the risk assessment process and introduces a rather new concept of judging changes within the European railway industry. This circumstance has risen the question how other technology sectors handle the aspect of modifications and alterations. The paper discusses the approaches for judging the significance of modifications within the three transport sectors of European railways, aviation and maritime transportation and the procedure which is used in the area of nuclear safety. We will outline the similarities and differences between these four methods and discuss the underlying reasons. Finally, we will take into account the role of the European legislator and the fundamental idea of a harmonization of the different approaches.

  1. CAR models: next-generation CAR modifications for enhanced T-cell function

    Directory of Open Access Journals (Sweden)

    Daniel Abate-Daga

    2016-01-01

    Full Text Available T cells genetically targeted with a chimeric antigen receptor (CAR to B-cell malignancies have demonstrated tremendous clinical outcomes. With the proof in principle for CAR T cells as a therapy for B-cell malignancies being established, current and future research is being focused on adapting CAR technology to other cancers, as well as enhancing its efficacy and/or safety. The modular nature of the CAR, extracellular antigen-binding domain fused to a transmembrane domain and intracellular T-cell signaling domains, allows for optimization by replacement of the various components. These modifications are creating a whole new class of therapeutic CARs. In this review, we discuss the recent major advances in CAR design and how these modifications will impact its clinical application.

  2. Transport Reactor Development Unit Modification to Provide a Syngas Slipstream at Elevated Conditions to Enable Separation of 100 LB/D of Hydrogen by Hydrogen Separation Membranes Year - 6 Activity 1.15 - Development of a National Center for Hydrogen Technology

    Energy Technology Data Exchange (ETDEWEB)

    Schlasner, Steven

    2012-03-01

    Gasification of coal when associated with carbon dioxide capture and sequestration has the potential to provide low-cost as well as low-carbon hydrogen for electric power, fuels or chemicals production. The key element to the success of this concept is inexpensive, effective separation of hydrogen from carbon dioxide in synthesis gas. Many studies indicate that membrane technology is one of the most, if not the most, economical means of accomplishing separation; however, the advancement of hydrogen separation membrane technology is hampered by the absence of experience or demonstration that the technology is effective economically and environmentally at larger scales. While encouraging performance has been observed at bench scale (less than 12 lb/d hydrogen), it would be imprudent to pursue a largescale demonstration without testing at least one intermediate scale, such as 100 lb/d hydrogen. Among its many gasifiers, the Energy & Environmental Research Center is home to the transport reactor demonstration unit (TRDU), a unit capable of firing 200—500 lb/hr of coal to produce 400 scfm of synthesis gas containing more than 200 lb/d of hydrogen. The TRDU and associated downstream processing equipment has demonstrated the capability of producing a syngas over a wide range of temperatures and contaminant levels — some of which approximate conditions of commercial-scale gasifiers. Until this activity, however, the maximum pressure of the TRDU’ s product syngas was 120 psig, well below the 400+ psig pressures of existing large gasifiers. This activity installed a high-temperature compressor capable of accepting the range of TRDU products up to 450°F and compressing them to 500 psig, a pressure comparable to some large scale gasifiers. Thus, with heating or cooling downstream of the TRDU compressor, the unit is now able to present a near-raw to clean gasifier synthesis gas containing more than 100 lb/d of hydrogen at up to 500 psig over a wide range of temperatures

  3. Casting Technology.

    Science.gov (United States)

    Wright, Michael D.; And Others

    1992-01-01

    Three articles discuss (1) casting technology as it relates to industry, with comparisons of shell casting, shell molding, and die casting; (2) evaporative pattern casting for metals; and (3) high technological casting with silicone rubber. (JOW)

  4. Living Technology

    DEFF Research Database (Denmark)

    2010-01-01

    This book is aimed at anyone who is interested in learning more about living technology, whether coming from business, the government, policy centers, academia, or anywhere else. Its purpose is to help people to learn what living technology is, what it might develop into, and how it might impact...... our lives. The phrase 'living technology' was coined to refer to technology that is alive as well as technology that is useful because it shares the fundamental properties of living systems. In particular, the invention of this phrase was called for to describe the trend of our technology becoming...... increasingly life-like or literally alive. Still, the phrase has different interpretations depending on how one views what life is. This book presents nineteen perspectives on living technology. Taken together, the interviews convey the collective wisdom on living technology's power and promise, as well as its...

  5. Technology transfer

    International Nuclear Information System (INIS)

    1998-01-01

    On the base of technological opportunities and of the environmental target of the various sectors of energy system this paper intend to conjugate the opportunity/objective with economic and social development through technology transfer and information dissemination [it

  6. Fabrication and Modification of Nanoporous Silicon Particles

    Science.gov (United States)

    Ferrari, Mauro; Liu, Xuewu

    2010-01-01

    Silicon-based nanoporous particles as biodegradable drug carriers are advantageous in permeation, controlled release, and targeting. The use of biodegradable nanoporous silicon and silicon dioxide, with proper surface treatments, allows sustained drug release within the target site over a period of days, or even weeks, due to selective surface coating. A variety of surface treatment protocols are available for silicon-based particles to be stabilized, functionalized, or modified as required. Coated polyethylene glycol (PEG) chains showed the effective depression of both plasma protein adsorption and cell attachment to the modified surfaces, as well as the advantage of long circulating. Porous silicon particles are micromachined by lithography. Compared to the synthesis route of the nanomaterials, the advantages include: (1) the capability to make different shapes, not only spherical particles but also square, rectangular, or ellipse cross sections, etc.; (2) the capability for very precise dimension control; (3) the capacity for porosity and pore profile control; and (4) allowance of complex surface modification. The particle patterns as small as 60 nm can be fabricated using the state-of-the-art photolithography. The pores in silicon can be fabricated by exposing the silicon in an HF/ethanol solution and then subjecting the pores to an electrical current. The size and shape of the pores inside silicon can be adjusted by the doping of the silicon, electrical current application, the composition of the electrolyte solution, and etching time. The surface of the silicon particles can be modified by many means to provide targeted delivery and on-site permanence for extended release. Multiple active agents can be co-loaded into the particles. Because the surface modification of particles can be done on wafers before the mechanical release, asymmetrical surface modification is feasible. Starting from silicon wafers, a treatment, such as KOH dipping or reactive ion

  7. A Review of Ultrafiltration and Forward Osmosis:application and modification

    Science.gov (United States)

    Chao, Gong; Shuili, Yu; Yufei, Shangguan; Zhengyang, Gu; Wangzhen, Yang; Liumo, Ren

    2018-03-01

    As a new treatment, membrane filtration is playing a more prominent role in treating many kinds of wastewater. Among all the membrane technologies, ultrafiltration(UF) and forward osmosis(FO) technology has been widely utilized and developed in oil field and refinery produced water. However, the reports about the differences between the two kinds of membrane technology used in oily wastewater are not yet available. In this review, at first we introduce the advantages, shortcomings and applications of UF and FO membranes. Among these, we mainly illustrate the membrane fouling, which now is a big problem because it increases costs and decreases membrane life to limit the industrialization of the membrane, and the different modification methods of membranes are discussed to figure out how these ways can ease the membrane fouling. Next we make a comparison of the two membranes. Finally we illustrate the future research topics.

  8. Earthing Technology

    NARCIS (Netherlands)

    Blok, Vincent

    2017-01-01

    In this article, we reflect on the conditions under which new technologies emerge in the Anthropocene and raise the question of how to conceptualize sustainable technologies therein. To this end, we explore an eco-centric approach to technology development, called biomimicry. We discuss opposing

  9. Technology Tiers

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    A technology tier is a level in a product system: final product, system, subsystem, component, or part. As a concept, it contrasts traditional “vertical” special technologies (for example, mechanics and electronics) and focuses “horizontal” feature technologies such as product characteristics...

  10. Proposal for modification to forward module design

    International Nuclear Information System (INIS)

    Lindsay, S.; Taylor, G.

    2000-01-01

    Concern for the baseline forward module thermal and mechanical viability has led to a proposed modification to the design described here. In view of the tight schedule to finalise the module design, proposed changes are constrained so that calculations and proto typing can be carried out without major changes to the key elements in the module. The following constraints were considered in the process of this work: 1. The hybrid contributes the bulk of the power to be removed from the module. 2. The temperature and its variation across the detector are the key specifications for the cooling design of the module. The hybrid temperature may impact via (secondary) convection and radiation heating, but its operation temperature is not assumed to be the major constraint. 3. The forward hybrid design is well advanced and represents a large effort that should be preserved. 4. The overall design of the module, in particular overall dimensions and placement of precision mounting points is well advanced. Assembly jigs based upon these dimensions are also advanced. The following problems are addressed by the current proposal: 1. The constraint of the small cooling point required to cool both the hybrid and the detector in the baseline is considered a serious limitation demanding high performance in the design and implementation of this contact in the baseline. 2. The small surface area of this contact is critical. Concerns that distortions of the block or relative distortions in the module between the detector and the hybrid, might further reduce the critical effective contact area, as well as possibly causing other problems, give further impetus to the proposed design modification. 3. Thermo-mechanical stress due to the cooling points at both ends of the module. 4. Lack of support of the hybrid near to the cable connectors. 5. Close proximity of the cooling pipe to the front-end electronics and the wire bonds. The proposal involves extending the hybrid substrate with two

  11. Modification of the Genome of Domestic Animals.

    Science.gov (United States)

    Lotti, Samantha N; Polkoff, Kathryn M; Rubessa, Marcello; Wheeler, Matthew B

    2017-07-03

    In the past few years, new technologies have arisen that enable higher efficiency of gene editing. With the increase ease of using gene editing technologies, it is important to consider the best method for transferring new genetic material to livestock animals. Microinjection is a technique that has proven to be effective in mice but is less efficient in large livestock animals. Over the years, a variety of methods have been used for cloning as well as gene transfer including; nuclear transfer, sperm mediated gene transfer (SMGT), and liposome-mediated DNA transfer. This review looks at the different success rate of these methods and how they have evolved to become more efficient. As well as gene editing technologies, including Zinc-finger nucleases (ZFNs), transcription activator-like effector nucleases (TALENs), and the most recent clustered regulatory interspaced short palindromic repeats (CRISPRs). Through the advancements in gene-editing technologies, generating transgenic animals is now more accessible and affordable. The goals of producing transgenic animals are to 1) increase our understanding of biology and biomedical science; 2) increase our ability to produce more efficient animals; and 3) produce disease resistant animals. ZFNs, TALENs, and CRISPRs combined with gene transfer methods increase the possibility of achieving these goals.

  12. Burn Rate Modification with Carborane Polymers

    Science.gov (United States)

    2017-11-01

    limited amount of material, but observations confirmed the rubber consistency necessary for formulation. The chemical reaction resulting in the urethane...unlimited. AD U.S. ARMY ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING CENTER Munitions Engineering Technology Center Picatinny Arsenal, New Jersey...Missile Research Development and Engineering Center, Redstone Arsenal, AL, for the n-hexyl carborane. UNCLASSIFIED Approved for public

  13. Radiation modification of the properties of polypropylene ...

    Indian Academy of Sciences (India)

    Research and Technology, Atomic Energy Authority, P.O. Box 29, Nasr City, Egypt. 2Radiation ... tions such as radiation sterilized medical and pharmaceutical ... extensively studied to extend the shelf life of food prod- ucts. ..... ond step is in the range of 210–305 ... effect of radiation on the thermal properties of PP/15wt%.

  14. 3. International Symposium 'Vacuum Technology and Equipment'. ISVTE-3

    International Nuclear Information System (INIS)

    Kogan, V.S.; Shulaev, V.M.

    1999-01-01

    The reports of the 3th International Symposium 'Vacuum Technology and Equipment', which was held in Kharkov at 22-24 September 1999 are presented. In this issue such subject are published: equipment and technology for thin and coating preparation. Studies of their surface layer and material modification by corpuscular effect and light

  15. Proton beam modification of lead white pigments

    International Nuclear Information System (INIS)

    Beck, L.; Gutiérrez, P.C.; Miserque, F.; Thomé, L.

    2013-01-01

    Pigments and paint materials are known to be sensitive to particle irradiation. Occasionally, the analysis of paintings by PIXE can induce a slight or dark stain depending on the experimental conditions (beam current, dose, particle energy). In order to understand this discoloration, we have irradiated various types of art white pigments – lead white (hydrocerussite and basic lead sulfate), gypsum, calcite, zinc oxide and titanium oxide – with an external 3 MeV proton micro-beam commonly used for PIXE experiments. We have observed various sensitivities depending on the pigment. No visible change occurs for calcite and titanium oxide, whereas lead white pigments are very sensitive. For the majority of the studied compounds, the discoloration is proportional to the beam current and charge. The damage induced by proton beam irradiation in lead white pigments was studied by micro-Raman and XPS spectroscopies. Structural modifications and dehydration were detected. Damage recovery was investigated by thermal treatment and UV-light irradiation. The discoloration disappeared after one week of UV illumination, showing that PIXE experiments could be safely undertaken for pigments and paintings

  16. Attentional bias modification encourages healthy eating.

    Science.gov (United States)

    Kakoschke, Naomi; Kemps, Eva; Tiggemann, Marika

    2014-01-01

    The continual exposure to unhealthy food cues in the environment encourages poor dietary habits, in particular consuming too much fat and sugar, and not enough fruit and vegetables. According to Berridge's (2009) model of food reward, unhealthy eating is a behavioural response to biased attentional processing. The present study used an established attentional bias modification paradigm to discourage the consumption of unhealthy food and instead promote healthy eating. Participants were 146 undergraduate women who were randomly assigned to two groups: one was trained to direct their attention toward pictures of healthy food ('attend healthy' group) and the other toward unhealthy food ('attend unhealthy' group). It was found that participants trained to attend to healthy food cues demonstrated an increased attentional bias for such cues and ate relatively more of the healthy than unhealthy snacks compared to the 'attend unhealthy' group. Theoretically, the results support the postulated link between biased attentional processing and consumption (Berridge, 2009). At a practical level, they offer potential scope for interventions that focus on eating well. Copyright © 2013 Elsevier Ltd. All rights reserved.

  17. Restriction-modification systems in Mycoplasma spp

    Directory of Open Access Journals (Sweden)

    Marcelo Brocchi

    2007-01-01

    Full Text Available Restriction and Modification (R-M systems are present in all Mycoplasma species sequenced so far. The presence of these genes poses barriers to gene transfer and could protect the cell against phage infections. The number and types of R-M genes between different Mycoplasma species are variable, which is characteristic of a polymorphism. The majority of the CDSs code for Type III R-M systems and particularly for methyltransferase enzymes, which suggests that functions other than the protection against the invasion of heterologous DNA may exist. A possible function of these enzymes could be the protection against the invasion of other but similar R-M systems. In Mycoplasma hyopneumoniae strain J, three of the putative methyltransferase genes were clustered in a region forming a genomic island. Many R-M CDSs were mapped in the vicinity of transposable elements suggesting an association between these genes and reinforcing the idea of R-M systems as mobile selfish DNA. Also, many R-M genes present repeats within their coding sequences, indicating that their expression is under the control of phase variation mechanisms. Altogether, these data suggest that R-M systems are a remarkable characteristic of Mycoplasma species and are probably involved in the adaptation of these bacteria to different environmental conditions.

  18. FRX-C/T large source modification

    International Nuclear Information System (INIS)

    Tuszewski, M.; Chrien, R.E.; Yavornik, E.J.; Armstrong, W.T.; Hugrass, W.; Linford, R.K.; McKenna, K.F.; Rej, D.J.; Siemon, R.E.

    1986-01-01

    FRC experiments on FRX-C/T during the past two years have been devoted to translation studies and, more recently, to formation studies in situ. The interest in the latter became stronger as FRX-D was proposed. It is intended that, in summer 1985, FRX-C/T be modified with a larger coil that would be essentially a half-scale prototype of FRX-D. This would allow studies of flux trapping with increased size and with the associated enhanced axial dynamics. The results from these formation studies, with and without some improved formation techniques, may influence the design of the FRX-D source in a major way. In addition, this FRX-C/T Large Source Modification may allow the study of FRC's with somewhat increased values of anti s, in the range 2-3. This may be sufficient to reach a new stability regime where the predicted internal tilt mode may occur. Finally, the larger coil size should yield improved FRC confinement times by about 50%, and may allow with a minimum of plasma decompression the study of FRC's with x/sub s/ in the range 0.6-0.7 in possible future translation experiments

  19. Electrochemical surface modification of titanium in dentistry.

    Science.gov (United States)

    Kim, Kyo-Han; Ramaswamy, Narayanan

    2009-01-01

    Titanium and its alloys have good biocompatibility with body cells and tissues and are widely used for implant applications. However, clinical procedures place more stringent and tough requirements on the titanium surface necessitating artificial surface treatments. Among the many methods of titanium surface modification, electrochemical techniques are simple and cheap. Anodic oxidation is the anodic electrochemical technique while electrophoretic and cathodic depositions are the cathodic electrochemical techniques. By anodic oxidation it is possible to obtain desired roughness, porosity and chemical composition of the oxide. Anodic oxidation at high voltages can improve the crystallinity of the oxide. The chief advantage of this technique is doping of the coating of the bath constituents and incorporation of these elements improves the properties of the oxide. Electrophoretic deposition uses hydroxyapatite (HA) powders dispersed in a suitable solvent at a particular pH. Under these operating conditions these particles acquire positive charge and coatings are obtained on the cathodic titanium by applying an external electric field. These coatings require a post-sintering treatment to improve the coating properties. Cathodic deposition is another type of electrochemical method where HA is formed in situ from an electrolyte containing calcium and phosphate ions. It is also possible to alter structure and/or chemistry of the obtained deposit. Nano-grained HA has higher surface energy and greater biological activity and therefore emphasis is being laid to produce these coatings by cathodic deposition.

  20. Crystal modifications and dissolution rate of piroxicam.

    Science.gov (United States)

    Lyn, Lim Yee; Sze, Huan Wen; Rajendran, Adhiyaman; Adinarayana, Gorajana; Dua, Kamal; Garg, Sanjay

    2011-12-01

    Piroxicam is a nonsteroidal anti-inflammatory drug with low aqueous solubility which exhibits polymorphism. The present study was carried out to develop polymorphs of piroxicam with enhanced solubility and dissolution rate by the crystal modification technique using different solvent mixtures prepared with PEG 4000 and PVP K30. Physicochemical characteristics of the modified crystal forms of piroxicam were investigated by X-ray powder diffractometry, FT-IR spectrophotometry and differential scanning calorimetry. Dissolution and solubility profiles of each modified crystal form were studied and compared with pure piroxicam. Solvent evaporation method (method I) produced both needle and cubic shaped crystals. Slow crystallization from ethanol with addition of PEG 4000 or PVP K30 at room temperature (method II) produced cubic crystal forms. Needle forms produced by method I improved dissolution but not solubility. Cubic crystals produced by method I had a dissolution profile similar to that of untreated piroxicam but showed better solubility than untreated piroxicam. Cubic shaped crystals produced by method II showed improved dissolution, without a significant change in solubility. Based on the XRPD results, modified piroxicam crystals obtained by method I from acetone/benzene were cube shaped, which correlates well with the FTIR spectrum; modified needle forms obtained from ethanol/methanol and ethanol/acetone showed a slight shift of FTIR peak that may be attributed to differences in the internal structure or conformation.