WorldWideScience

Sample records for models descriptive note

  1. Exercise in completing design information questionnaire for model research reactor: model description, notes, questionnaire

    International Nuclear Information System (INIS)

    Bellinger, J.; Ho, T.

    1989-01-01

    The document which defines the inspection measures which the IAEA can deploy at any given nuclear facility is known as the Facility Attachment. For the Agency to negotiate an effective Facility Attachment it must have available certain design information, including the facility's identity, capacity and location; the form, location and flow of nuclear material and the layout of important items of equipment; and a description of the features and procedures relating to nuclear material accountancy, containment and surveillance. In practice such information is solicited in a format, standardized for each facility type, known as the Design Information Questionnaire or the D.I.Q. The nuclear activities used as a model in this course are those of a fictitious country called Pacifica. These nuclear activities bear some resemblance to those at the Australian Atomic Energy Commission's Research Establishment at Lucas Heights. Specifically, Pacifica has a 10 MW heavy water cooled and moderated research reactor using enriched uranium fuel which is very similar to the HIFAR reactor. The reactor and the associated laboratories are described and the Design Information Questionnaire for them is completed. figs., tabs

  2. A note on the translation of conceptual data models into description logics: disjointness and covering assumptions

    CSIR Research Space (South Africa)

    Casini, G

    2012-10-01

    Full Text Available ). In this paper we propose two simple procedures to assist modelers with integrating these assumptions into their models, thereby allowing for a more complete translation into DLs....

  3. Note on the hydrodynamic description of thin nematic films: Strong anchoring model

    KAUST Repository

    Lin, Te-Sheng

    2013-01-01

    We discuss the long-wave hydrodynamic model for a thin film of nematic liquid crystal in the limit of strong anchoring at the free surface and at the substrate. We rigorously clarify how the elastic energy enters the evolution equation for the film thickness in order to provide a solid basis for further investigation: several conflicting models exist in the literature that predict qualitatively different behaviour. We consolidate the various approaches and show that the long-wave model derived through an asymptotic expansion of the full nemato-hydrodynamic equations with consistent boundary conditions agrees with the model one obtains by employing a thermodynamically motivated gradient dynamics formulation based on an underlying free energy functional. As a result, we find that in the case of strong anchoring the elastic distortion energy is always stabilising. To support the discussion in the main part of the paper, an appendix gives the full derivation of the evolution equation for the film thickness via asymptotic expansion. © 2013 AIP Publishing LLC.

  4. A note on name individuation and identifying descriptions

    African Journals Online (AJOL)

    Kate H

    Note that, interestingly enough, it does not matter whether the descriptions are false, incomplete or otherwise ... Note that an acceptance of the Baptismal Standard of individuation does not force one to adopt a causal ... Standard of individuation provides a natural way of making sense of the claim that a single name used to ...

  5. CRAC2 model description

    International Nuclear Information System (INIS)

    Ritchie, L.T.; Alpert, D.J.; Burke, R.P.; Johnson, J.D.; Ostmeyer, R.M.; Aldrich, D.C.; Blond, R.M.

    1984-03-01

    The CRAC2 computer code is a revised version of CRAC (Calculation of Reactor Accident Consequences) which was developed for the Reactor Safety Study. This document provides an overview of the CRAC2 code and a description of each of the models used. Significant improvements incorporated into CRAC2 include an improved weather sequence sampling technique, a new evacuation model, and new output capabilities. In addition, refinements have been made to the atmospheric transport and deposition model. Details of the modeling differences between CRAC2 and CRAC are emphasized in the model descriptions

  6. Notes on modeling and simulation

    Energy Technology Data Exchange (ETDEWEB)

    Redondo, Antonio [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-03-10

    These notes present a high-level overview of how modeling and simulation are carried out by practitioners. The discussion is of a general nature; no specific techniques are examined but the activities associated with all modeling and simulation approaches are briefly addressed. There is also a discussion of validation and verification and, at the end, a section on why modeling and simulation are useful.

  7. MCFire model technical description

    Science.gov (United States)

    David R. Conklin; James M. Lenihan; Dominique Bachelet; Ronald P. Neilson; John B. Kim

    2016-01-01

    MCFire is a computer program that simulates the occurrence and effects of wildfire on natural vegetation, as a submodel within the MC1 dynamic global vegetation model. This report is a technical description of the algorithms and parameter values used in MCFire, intended to encapsulate its design and features a higher level that is more conceptual than the level...

  8. A Note on Name Individuation and Identifying Descriptions | Smit ...

    African Journals Online (AJOL)

    Abstract. In “Public Proper names and Idiolectical Identifying Descriptions”, Glezakos (2009) puts forward a theory concerning the role of identifying descriptions in the theory of names. Her main claim is that such identifying descriptions serve to individuate names, i.e. to make it the case that a given linguistic act containing a ...

  9. Notes on Japanese Rhizocephala, with description of two new species

    NARCIS (Netherlands)

    Boschma, H.

    1935-01-01

    The following notes are based upon material of parasites on two Crustaceans from Japan, viz., Pachygrapsus crassipes Randall and Petrolisthes japonicus de Haan 1). Each of these two species may be infested by two different species of Rhizocephala: on Pachygrapsus crassipes occur the parasites

  10. A Note on the Field-Theoretical Description of Superfluids

    CERN Document Server

    Andrianopoli, L; Grassi, P A; Trigiante, M

    2014-01-01

    Recently, a Lagrangian description of superfluids attracted some interest from the fluid/gravity-correspondence viewpoint. In this respect, the work of Dubovksy et al. has proposed a new field theoretical description of fluids, which has several interesting aspects. On another side, we have provided in arXiv:1304.2206 a supersymmetric extension of the original works. In the analysis of the Lagrangian structures a new invariant appeared which, although related to known invariants, provides, in our opinion, a better parametrisation of the fluid dynamics in order to describe the fluid/superfluid phases.

  11. AREST model description

    Energy Technology Data Exchange (ETDEWEB)

    Engel, D.W.; McGrail, B.P.

    1993-11-01

    The Office of Civilian Radioactive Waste Management and the Power Reactor and Nuclear Fuel Development Corporation of Japan (PNC) have supported the development of the Analytical Repository Source-Term (AREST) at Pacific Northwest Laboratory. AREST is a computer model developed to evaluate radionuclide release from an underground geologic repository. The AREST code can be used to calculate/estimate the amount and rate of each radionuclide that is released from the engineered barrier system (EBS) of the repository. The EBS is the man-made or disrupted area of the repository. AREST was designed as a system-level models to simulate the behavior of the total repository by combining process-level models for the release from an individual waste package or container. AREST contains primarily analytical models for calculating the release/transport of radionuclides to the lost rock that surrounds each waste package. Analytical models were used because of the small computational overhead that allows all the input parameters to be derived from a statistical distribution. Recently, a one-dimensional numerical model was also incorporated into AREST, to allow for more detailed modeling of the transport process with arbitrary length decay chains. The next step in modeling the EBS, is to develop a model that couples the probabilistic capabilities of AREST with a more detailed process model. This model will need to look at the reactive coupling of the processes that are involved with the release process. Such coupling would include: (1) the dissolution of the waste form, (2) the geochemical modeling of the groundwater, (3) the corrosion of the container overpacking, and (4) the backfill material, just to name a few. Several of these coupled processes are already incorporated in the current version of AREST.

  12. AREST model description

    International Nuclear Information System (INIS)

    Engel, D.W.; McGrail, B.P.

    1993-11-01

    The Office of Civilian Radioactive Waste Management and the Power Reactor and Nuclear Fuel Development Corporation of Japan (PNC) have supported the development of the Analytical Repository Source-Term (AREST) at Pacific Northwest Laboratory. AREST is a computer model developed to evaluate radionuclide release from an underground geologic repository. The AREST code can be used to calculate/estimate the amount and rate of each radionuclide that is released from the engineered barrier system (EBS) of the repository. The EBS is the man-made or disrupted area of the repository. AREST was designed as a system-level models to simulate the behavior of the total repository by combining process-level models for the release from an individual waste package or container. AREST contains primarily analytical models for calculating the release/transport of radionuclides to the lost rock that surrounds each waste package. Analytical models were used because of the small computational overhead that allows all the input parameters to be derived from a statistical distribution. Recently, a one-dimensional numerical model was also incorporated into AREST, to allow for more detailed modeling of the transport process with arbitrary length decay chains. The next step in modeling the EBS, is to develop a model that couples the probabilistic capabilities of AREST with a more detailed process model. This model will need to look at the reactive coupling of the processes that are involved with the release process. Such coupling would include: (1) the dissolution of the waste form, (2) the geochemical modeling of the groundwater, (3) the corrosion of the container overpacking, and (4) the backfill material, just to name a few. Several of these coupled processes are already incorporated in the current version of AREST

  13. Immigrant fertility in Sweden, 2000-2011: A descriptive note

    Directory of Open Access Journals (Sweden)

    Lotta Persson

    2014-03-01

    Full Text Available Background: Modern Scandinavian population registers provide excellent data sources that allow a user to quickly gain an impression of the level of fertility and its structure across subpopulations. This may also allow the analyst to check a feature of the much-cited disruption hypothesis, at least in part. Objective: The purpose of this note is to exploit this potential to give an overview of the structure of recent total fertility after immigration to Sweden from various groups of sending countries, separately for males and females. In the process we demonstrate to what extent the post-migration fertility compensation which is part of the fertility disruption hypothesis is fulfilled in our study population. Due to the nature of our data we have refrained from studying fertility before migration. Methods: Based on data from a combination of two Swedish administrative registers (the Historic Population Register and the Multi-Generation Register that cover both men and women in the entire population for the years 2000-2011, we compute and plot TFR-like age-cumulated fertility levels, specific for years since immigration, for six groups of sending countries, separately for men and women. Results: We find that the post-migration fertility compensation specified as part of the fertility disruption hypothesis is visibly confirmed in our Swedish study population for female European immigrants from non-EU countries and for female immigrants from non-European countries with a low or medium UN Human Development Index, but not so for other female immigrants, i.e. not for those who come from a Nordic country or from a non-Nordic EU country, and not for female immigrants from a non-European country with a high Human Development Index, including the United States. We find mild but less conclusive evidence for the same feature for males. Conclusions: This shows that at least as far as post-migration fertility compensation is concerned, the disruption

  14. New descriptive temperature model

    Science.gov (United States)

    Bilitza, D.

    The model profiles of the electron and ion temperature that have been proposed in connection with the International Reference Ionosphere (IRI) are surveyed, with a review given of the available data base. Plasma density is seen as exerting great influence, at least during daytime. It does not, however, appear to be appropriate for deriving the temperature unambiguously from the density value. On the basis of a comparison of measured data from the AE-C and Aeros-B satellites and incoherent backscatter stations Millstone Hill and Arecibo (U.S.) and Jicamarca (Peru), a new model relation between temperature and density is proposed for daylight hours. The relation depends on altitude and the modified magnetic dip latitude.

  15. New descriptive temperature model

    International Nuclear Information System (INIS)

    Bilitza, D.

    1982-01-01

    The model profiles of the electron and ion temperature that have been proposed in connection with the International Reference Ionosphere (IRI) are surveyed, with a review given of the available data base. Plasma density is seen as exerting great influence, at least during daytime. It does not, however, appear to be appropriate for deriving the temperature unambiguously from the density value. On the basis of a comparison of measured data from the AE-C and Aeros-B satellites and incoherent backscatter stations Millstone Hill and Arecibo (U.S.) and Jicamarca (Peru), a new model relation between temperature and density is proposed for daylight hours. The relation depends on altitude and the modified magnetic dip latitude

  16. CRACUK model description (appendices to the CRAC2 model description)

    International Nuclear Information System (INIS)

    Nixon, W.; Egan, M.J.

    1986-08-01

    The CRACUK computer code is a revised version of the US consequence modelling code CRAC2, adapted to suit UK requirements. The revisions include modifications to the models for spatial interval representation, weather sequence sampling, atmospheric dispersion, dosimetry and countermeasures. This document describes, in the form of appendices to the CRAC2 model description, each of the revisions made to the original model which collectively distinguish CRACUK from CRAC2. (author)

  17. Application Note: Power Grid Modeling With Xyce.

    Energy Technology Data Exchange (ETDEWEB)

    Sholander, Peter E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-06-01

    This application note describes how to model steady-state power flows and transient events in electric power grids with the SPICE-compatible Xyce TM Parallel Electronic Simulator developed at Sandia National Labs. This application notes provides a brief tutorial on the basic devices (branches, bus shunts, transformers and generators) found in power grids. The focus is on the features supported and assumptions made by the Xyce models for power grid elements. It then provides a detailed explanation, including working Xyce netlists, for simulating some simple power grid examples such as the IEEE 14-bus test case.

  18. Modelling object typicality in description logics - [Workshop on Description Logics

    CSIR Research Space (South Africa)

    Britz, K

    2009-07-01

    Full Text Available The authors presents a semantic model of typicality of concept members in description logics that accords well with a binary, globalist cognitive model of class membership and typicality. The authors define a general preferential semantic framework...

  19. Notes on Mayer expansions and matrix models

    International Nuclear Information System (INIS)

    Bourgine, Jean-Emile

    2014-01-01

    Mayer cluster expansion is an important tool in statistical physics to evaluate grand canonical partition functions. It has recently been applied to the Nekrasov instanton partition function of N=2 4d gauge theories. The associated canonical model involves coupled integrations that take the form of a generalized matrix model. It can be studied with the standard techniques of matrix models, in particular collective field theory and loop equations. In the first part of these notes, we explain how the results of collective field theory can be derived from the cluster expansion. The equalities between free energies at first orders is explained by the discrete Laplace transform relating canonical and grand canonical models. In a second part, we study the canonical loop equations and associate them with similar relations on the grand canonical side. It leads to relate the multi-point densities, fundamental objects of the matrix model, to the generating functions of multi-rooted clusters. Finally, a method is proposed to derive loop equations directly on the grand canonical model

  20. Building Program Models Incrementally from Informal Descriptions.

    Science.gov (United States)

    1979-10-01

    AD-AOB6 50 STANFORD UNIV CA DEPT OF COMPUTER SCIENCE F/G 9/2 BUILDING PROGRAM MODELS INCREMENTALLY FROM INFORMAL DESCRIPTION--ETC(U) OCT 79 B P...port SCI.ICS.U.79.2 t Building Program Models Incrementally from Informal Descriptions by Brian P. McCune Research sponsored by Defense Advanced...TYPE OF REPORT & PERIOD COVERED Building Program Models Incrementally from Informal Descriptions. , technical, October 1979 6. PERFORMING ORG

  1. Noted

    Science.gov (United States)

    Nunberg, Geoffrey

    2013-01-01

    Considering how much attention people lavish on the technologies of writing--scroll, codex, print, screen--it's striking how little they pay to the technologies for digesting and regurgitating it. One way or another, there's no sector of the modern world that is not saturated with note-taking--the bureaucracy, the liberal professions, the…

  2. Modelling object typicality in description logics

    CSIR Research Space (South Africa)

    Britz, K

    2009-12-01

    Full Text Available The authors present a semantic model of typicality of concept members in description logics (DLs) that accords well with a binary, globalist cognitive model of class membership and typicality. The authors define a general preferential semantic...

  3. Site descriptive modelling - strategy for integrated evaluation

    International Nuclear Information System (INIS)

    Andersson, Johan

    2003-02-01

    The current document establishes the strategy to be used for achieving sufficient integration between disciplines in producing Site Descriptive Models during the Site Investigation stage. The Site Descriptive Model should be a multidisciplinary interpretation of geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry, transport properties and ecosystems using site investigation data from deep bore holes and from the surface as input. The modelling comprise the following iterative steps, evaluation of primary data, descriptive and quantitative modelling (in 3D), overall confidence evaluation. Data are first evaluated within each discipline and then the evaluations are checked between the disciplines. Three-dimensional modelling (i.e. estimating the distribution of parameter values in space and its uncertainty) is made in a sequence, where the geometrical framework is taken from the geological model and in turn used by the rock mechanics, thermal and hydrogeological modelling etc. The three-dimensional description should present the parameters with their spatial variability over a relevant and specified scale, with the uncertainty included in this description. Different alternative descriptions may be required. After the individual discipline modelling and uncertainty assessment a phase of overall confidence evaluation follows. Relevant parts of the different modelling teams assess the suggested uncertainties and evaluate the feedback. These discussions should assess overall confidence by, checking that all relevant data are used, checking that information in past model versions is considered, checking that the different kinds of uncertainty are addressed, checking if suggested alternatives make sense and if there is potential for additional alternatives, and by discussing, if appropriate, how additional measurements (i.e. more data) would affect confidence. The findings as well as the modelling results are to be documented in a Site Description

  4. Fragments of musicalliturgical codices in Spain: notes for and historiography and a proposal of description

    Directory of Open Access Journals (Sweden)

    David Andrés Fernández

    2017-07-01

    Full Text Available From the Middle Ages, several circumstances have caused the destruction of liturgical manuscripts with music and their reutilisation. The remaining fragments are proof of what once was part of the Western written culture, therefore these primary sources provide insight into diverse aspects of our history. In Spain, some researchers have identified and studied those fragments, particulary the musico-liturgical ones. This article shows a historiographic review on the field, and propose, based on this review, a form for description which can be used as a model in their analysis, and serve as well as fields in a potential database in Spanish language. As a result, the information on the topic has been updated, and an accurate, and detailed descriptive-template has been addressed to the more accepted standards.

  5. Taxonomic notes on some Polyglyptini: descriptions of new genus and new species (Homoptera, Membracidae, Smiliinae

    Directory of Open Access Journals (Sweden)

    Albino M. Sakakibara

    1996-01-01

    Full Text Available Taxonomic notes on some Polyglyptini; descriptions of new genus and new species (Homoptera, Membracidae, Smiliinae. The genera Hemiptycha Germar, Metheisa Fowler, Maturnaria Metcalf, Aphetea Fowler, Dioclophara Kirkaldy, and Phormophora Stål, are redescribed; Creonus, gen.n. (type species: Maturna lloydi Funkhouser, 1914, and Aphetea robustula, sp.n. (from Bolivia, are described. Some nomenclatural changes are introduced, as follow: - Hemiptycha Germar, 1833 = Polyrhyssa Stål, 1869, syn.n.: - Hemiptycha cultrata (Coquebert, 1801, comb.n., = Polyglyptodes flavocostatus Haviland, 1925, syn.n., = Polyrhyssa cultrata maculata Fonseca, 1942, syn.n. - Hemiptycha obtecta (Fabricius, 1803 = Hille herbicola Haviland, 1925, syn.n. - Maturnaria ephippigera (Fairmaire, 1846 = Publilia tumulata Buckton, 1903, syn.n., = Metheisa fowleri Funkhouser, 1927, syn.n. - Creonus lloydi (Funkhouser, 1914, comb.n. - Aphetea parvula (Fabricius, 1803, comb.n., = Aphetea affinis Haviland, 1925, syn.n. - Dioclophara Kirkaldy, 1904 = lncolea Goding, 1926, syn.n. - Dioclophara viridula (Fairmaire, 1846 = Maturna multilineata Fonseca, 1942, syn.n. - Dioclophara variegata (Goding, 1926, comb.n. = lncolea viridis Goding, 1926, syn.n. - Phormophora maura (Fabricius, 1803 = Darnis dorsata Fabricius, 1803, syn.n.

  6. Description of reference (model) plant

    International Nuclear Information System (INIS)

    Schneider, R.A.

    1984-01-01

    For the workshop on Safeguards System design for a fuel fabrication plant, a generic example of a LEU bulk-handling facility that is based on the Exxon LWR fuel fabrication plants is used. The model plant information is given in the following separate sections: (1) process assumptions; (2) six-month material balance model; (3) measurements; (4) error parameters, measurements, and sigma MUF calculations; (5) material control areas; (6) accounting, records, and reports; (7) tamper-safing; and (8) measurement control program

  7. LAGRANGIAN PARTICLE DISPERSION MODEL (LPDM) TECHNICAL DESCRIPTION

    International Nuclear Information System (INIS)

    Chen, K

    2006-01-01

    The Savannah River National Laboratory (SRNL) uses the Lagrangian Particle Dispersion Model (LPDM) in conjunction with the Regional Atmospheric Modeling System as an operational tool for emergency response consequence assessments for the Savannah River Site (SRS). The LPDM is an advanced stochastic atmospheric transport model used to transport and disperse passive tracers subject to the meteorological field generated by RAMS from sources of varying number and shape. The Atmospheric Technologies Group (ATG) of the SRNL is undertaking the task of reviewing documentation and code for LPDM Quality Assurance (QA). The LPDM QA task will include a model technical description, computer coding descriptions, model applications, and configuration control. This report provides a comprehensive technical description of the LPDM model

  8. A new species of the genus Ambrostoma Motschulsky (Coleoptera, Chrysomelidae, Chrysomelinae) from South Korea, with larval descriptions and biological notes

    OpenAIRE

    Hee-Wook Cho; Lech Borowiec

    2013-01-01

    Abstract Ambrostoma koreana sp. n. is described from South Korea. Detailed descriptions and illustrations of adult and all larval instars are provided and differences to closely related species are discussed. Ovoviviparity is reported for the first time in the genus Ambrostoma . Notes on distribution, host plant and biology are also provided.

  9. A new species of the genus Ambrostoma Motschulsky (Coleoptera, Chrysomelidae, Chrysomelinae from South Korea, with larval descriptions and biological notes

    Directory of Open Access Journals (Sweden)

    Hee-Wook Cho

    2013-08-01

    Full Text Available Ambrostoma koreana sp. n. is described from South Korea. Detailed descriptions and illustrations of adult and all larval instars are provided and differences to closely related species are discussed. Ovoviviparity is reported for the first time in the genus Ambrostoma. Notes on distribution, host plant and biology are also provided.

  10. Note on the occurrence of a rare palaemonid prawn, Palaemonsewelli (Kemp, 1925) in South Vietnam, with its description (Decapoda: Caridea)

    NARCIS (Netherlands)

    Xuân, Ng.V.

    2000-01-01

    A rare palaemonid prawn Palaemon sewelli (Kemp, 1925) was found in abundance in a shallow and flat coastal region of southeastern Vietnam, at a depth of 4-9 m. This is the first record of the species from Vietnam. A description of the two colour morphs of the freshly collected specimens and notes on

  11. Towards reproducible descriptions of neuronal network models.

    Directory of Open Access Journals (Sweden)

    Eilen Nordlie

    2009-08-01

    Full Text Available Progress in science depends on the effective exchange of ideas among scientists. New ideas can be assessed and criticized in a meaningful manner only if they are formulated precisely. This applies to simulation studies as well as to experiments and theories. But after more than 50 years of neuronal network simulations, we still lack a clear and common understanding of the role of computational models in neuroscience as well as established practices for describing network models in publications. This hinders the critical evaluation of network models as well as their re-use. We analyze here 14 research papers proposing neuronal network models of different complexity and find widely varying approaches to model descriptions, with regard to both the means of description and the ordering and placement of material. We further observe great variation in the graphical representation of networks and the notation used in equations. Based on our observations, we propose a good model description practice, composed of guidelines for the organization of publications, a checklist for model descriptions, templates for tables presenting model structure, and guidelines for diagrams of networks. The main purpose of this good practice is to trigger a debate about the communication of neuronal network models in a manner comprehensible to humans, as opposed to machine-readable model description languages. We believe that the good model description practice proposed here, together with a number of other recent initiatives on data-, model-, and software-sharing, may lead to a deeper and more fruitful exchange of ideas among computational neuroscientists in years to come. We further hope that work on standardized ways of describing--and thinking about--complex neuronal networks will lead the scientific community to a clearer understanding of high-level concepts in network dynamics, and will thus lead to deeper insights into the function of the brain.

  12. A Descriptive Evaluation of Software Sizing Models

    Science.gov (United States)

    1987-09-01

    compensate for a lack of understanding of a software job to be done. 1.3 REPORT OUTLINE The guiding principle for model selection for this paper was...MODEL SIZE ESTIMATES FOR THE CAiSS SENSITIVITY MODEL MODEL SLOC ESD 37,600+ SPQR 35,910 BYL 22,402 PRICE SZ 21,410 ASSET-R 11,943 SSM 11,700 ASSET-R...disk. ?. Date LS, De fault current date, Re quire ] - ,, ... perffr: an,- 1 ,’ e e st i ma t e. Quantitative inputs Note- Each of the nine quantitative

  13. Minimum Description Length Shape and Appearance Models

    DEFF Research Database (Denmark)

    Thodberg, Hans Henrik

    2003-01-01

    The Minimum Description Length (MDL) approach to shape modelling is reviewed. It solves the point correspondence problem of selecting points on shapes defined as curves so that the points correspond across a data set. An efficient numerical implementation is presented and made available as open s...

  14. MODEL OF BRAZILIAN URBANIZATION: GENERAL NOTES

    Directory of Open Access Journals (Sweden)

    Leandro da Silva Guimarães

    2016-07-01

    Full Text Available The full text format seeks to analyze the social inequality in Brazil through the spatial process of that inequality in this sense it analyzes, scratching the edges of what is known of the Brazilian urbanization model and how this same model produced gentrification cities and exclusive. So search the text discuss the country’s urban exclusion through consolidation of what is conventionally called peripheral areas, or more generally, of peripheries. The text on screen is the result of research carried out at the Federal Fluminense University in Masters level. In this study, we tried to understand the genesis of an urban housing development located in São Gonçalo, Rio de Janeiro called Jardim Catarina. Understand what the problem space partner who originated it. In this sense, his analysis becomes consubstantial to understand the social and spatial inequalities in Brazil, as well as the role of the state as planning manager socio-spatial planning and principal agent in the solution of such problems. It is expected that with the realization of a study of greater amounts, from which this article is just a micro work can contribute subsidies that contribute to the arrangement and crystallization of public policies that give account of social inequalities and serve to leverage a country more fair and equitable cities.

  15. Minimum Description Length Shape and Appearance Models

    DEFF Research Database (Denmark)

    Thodberg, Hans Henrik

    2003-01-01

    The Minimum Description Length (MDL) approach to shape modelling is reviewed. It solves the point correspondence problem of selecting points on shapes defined as curves so that the points correspond across a data set. An efficient numerical implementation is presented and made available as open s...... source Matlab code. The problems with the early MDL approaches are discussed. Finally the MDL approach is extended to an MDL Appearance Model, which is proposed as a means to perform unsupervised image segmentation....

  16. Notes on nonsingular models of black holes

    Science.gov (United States)

    Frolov, Valeri P.

    2016-11-01

    We discuss static spherically symmetric metrics which represent nonsingular black holes in four- and higher-dimensional spacetime. We impose a set of restrictions, such as a regularity of the metric at the center r =0 and Schwarzschild asymptotic behavior at large r . We assume that the metric besides mass M contains an additional parameter ℓ, which determines the scale where modification of the solution of the Einstein equations becomes significant. We require that the modified metric obeys the limiting curvature condition; that is, its curvature is uniformly restricted by the value ˜ℓ-2. We also make a "more technical" assumption that the metric coefficients are rational functions of r . In particular, the invariant (∇r )2 has the form Pn(r )/P˜n(r ), where Pn and P˜n are polynomials of the order of n . We discuss first the case of four dimensions. We show that when n ≤2 such a metric cannot describe a nonsingular black hole. For n =3 we find a suitable metric, which besides M and ℓ contains a dimensionless numerical parameter. When this parameter vanishes, the obtained metric coincides with Hayward's one. The characteristic property of such spacetimes is -ξ2=(∇r )2, where ξ2 is a timelike at infinity Killing vector. We describe a possible generalization of a nonsingular black-hole metric to the case when this equality is violated. We also obtain a metric for a charged nonsingular black hole obeying similar restrictions as the neutral one and construct higher dimensional models of neutral and charged black holes.

  17. A Note on the Correlated Random Coefficient Model

    DEFF Research Database (Denmark)

    Kolodziejczyk, Christophe

    In this note we derive the bias of the OLS estimator for a correlated random coefficient model with one random coefficient, but which is correlated with a binary variable. We provide set-identification to the parameters of interest of the model. We also show how to reduce the bias of the estimator...

  18. A note on intrinsic Conditional Autoregressive models for disconnected graphs

    KAUST Repository

    Freni-Sterrantino, Anna

    2017-05-13

    In this note we discuss (Gaussian) intrinsic conditional autoregressive (CAR) models for disconnected graphs, with the aim of providing practical guidelines for how these models should be defined, scaled and implemented. We show how these suggestions can be implemented in two examples on disease mapping.

  19. When Program Notes Don't Help: Music Descriptions and Enjoyment

    Science.gov (United States)

    Margulis, Elizabeth Hellmuth

    2010-01-01

    The widespread practice of including program notes for classical concerts assumes that extramusical information affects musical experience, but the psychological mechanisms underlying this process are little understood. In this study, 16 people without formal musical training heard excerpts from Beethoven String Quartets prefaced by either a…

  20. Notes on Amazonian Bittacidae (Mecoptera with the descriptions of two new species

    Directory of Open Access Journals (Sweden)

    Norman D. Penny

    1982-09-01

    Full Text Available New species of Issikiella and Nannobittacus are described and notes are presented on other Amazonian species of Mecoptera.Nova espécie de Issikiella e Nannobittacus são descritas e notas são apresentadas para outras espécies de Mecopteros da Amazônia.

  1. Note on off-shell relations in nonlinear sigma model

    International Nuclear Information System (INIS)

    Chen, Gang; Du, Yi-Jian; Li, Shuyi; Liu, Hanqing

    2015-01-01

    In this note, we investigate relations between tree-level off-shell currents in nonlinear sigma model. Under Cayley parametrization, all odd-point currents vanish. We propose and prove a generalized U(1) identity for even-point currents. The off-shell U(1) identity given in http://dx.doi.org/10.1007/JHEP01(2014)061 is a special case of the generalized identity studied in this note. The on-shell limit of this identity is equivalent with the on-shell KK relation. Thus this relation provides the full off-shell correspondence of tree-level KK relation in nonlinear sigma model.

  2. Transport properties site descriptive model. Guidelines for evaluation and modelling

    International Nuclear Information System (INIS)

    Berglund, Sten; Selroos, Jan-Olof

    2004-04-01

    This report describes a strategy for the development of Transport Properties Site Descriptive Models within the SKB Site Investigation programme. Similar reports have been produced for the other disciplines in the site descriptive modelling (Geology, Hydrogeology, Hydrogeochemistry, Rock mechanics, Thermal properties, and Surface ecosystems). These reports are intended to guide the site descriptive modelling, but also to provide the authorities with an overview of modelling work that will be performed. The site descriptive modelling of transport properties is presented in this report and in the associated 'Strategy for the use of laboratory methods in the site investigations programme for the transport properties of the rock', which describes laboratory measurements and data evaluations. Specifically, the objectives of the present report are to: Present a description that gives an overview of the strategy for developing Site Descriptive Models, and which sets the transport modelling into this general context. Provide a structure for developing Transport Properties Site Descriptive Models that facilitates efficient modelling and comparisons between different sites. Provide guidelines on specific modelling issues where methodological consistency is judged to be of special importance, or where there is no general consensus on the modelling approach. The objectives of the site descriptive modelling process and the resulting Transport Properties Site Descriptive Models are to: Provide transport parameters for Safety Assessment. Describe the geoscientific basis for the transport model, including the qualitative and quantitative data that are of importance for the assessment of uncertainties and confidence in the transport description, and for the understanding of the processes at the sites. Provide transport parameters for use within other discipline-specific programmes. Contribute to the integrated evaluation of the investigated sites. The site descriptive modelling of

  3. Forsmark - site descriptive model version 0

    International Nuclear Information System (INIS)

    2002-10-01

    During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

  4. Simpevarp - site descriptive model version 0

    International Nuclear Information System (INIS)

    2002-11-01

    During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

  5. Simpevarp - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-11-01

    During 2002, SKB is starting detailed investigations at two potential sites for a deep repository in the Precambrian rocks of the Fennoscandian Shield. The present report concerns one of those sites, Simpevarp, which lies in the municipality of Oskarshamn, on the southeast coast of Sweden, about 250 kilometres south of Stockholm. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. SKB maintains two main databases at the present time, a site characterisation database called SICADA and a geographic information system called SKB GIS. The site descriptive model will be developed and presented with the aid of the SKB GIS capabilities, and with SKBs Rock Visualisation System (RVS), which is also linked to SICADA. The version 0 model forms an important framework for subsequent model versions, which are developed successively, as new information from the site investigations becomes available. Version 0 is developed out of the information available at the start of the site investigation. In the case of Simpevarp, this is essentially the information which was compiled for the Oskarshamn feasibility study, which led to the choice of that area as a favourable object for further study, together with information collected since its completion. This information, with the exception of the extensive data base from the nearby Aespoe Hard Rock Laboratory, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. Against this background, the present report consists of the following components: an overview of the present content of the databases

  6. Forsmark - site descriptive model version 0

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-10-01

    During 2002, the Swedish Nuclear Fuel and Waste Management Company (SKB) is starting investigations at two potential sites for a deep repository in the Precambrian basement of the Fennoscandian Shield. The present report concerns one of those sites, Forsmark, which lies in the municipality of Oesthammar, on the east coast of Sweden, about 150 kilometres north of Stockholm. The site description should present all collected data and interpreted parameters of importance for the overall scientific understanding of the site, for the technical design and environmental impact assessment of the deep repository, and for the assessment of long-term safety. The site description will have two main components: a written synthesis of the site, summarising the current state of knowledge, as documented in the databases containing the primary data from the site investigations, and one or several site descriptive models, in which the collected information is interpreted and presented in a form which can be used in numerical models for rock engineering, environmental impact and long-term safety assessments. The site descriptive models are devised and stepwise updated as the site investigations proceed. The point of departure for this process is the regional site descriptive model, version 0, which is the subject of the present report. Version 0 is developed out of the information available at the start of the site investigation. This information, with the exception of data from tunnels and drill holes at the sites of the Forsmark nuclear reactors and the underground low-middle active radioactive waste storage facility, SFR, is mainly 2D in nature (surface data), and is general and regional, rather than site-specific, in content. For this reason, the Forsmark site descriptive model, version 0, as detailed in the present report, has been developed at a regional scale. It covers a rectangular area, 15 km in a southwest-northeast and 11 km in a northwest-southeast direction, around the

  7. Confidence assessment. Site-descriptive modelling SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    2008-12-15

    independent data from different disciplines. While some aspects have lower confidence this lack of confidence is handled by providing wider uncertainty ranges, bounding estimates and/or alternative models to repository engineering and long term safety assessment. It is judged that most, of the low confidence aspects have little impact on repository engineering design or for long-term safety. It may also be noted that the feedback requirements from SR-Can to the site modelling are now met in the completed site investigations, subject to levels of uncertainty that are viewed as acceptable. Only a few data points and a few types of data have been omitted from the modelling, mainly because they are judged less relevant and reliable than the data considered. Inclusion of data from outside the Laxemar subarea might have enhanced confidence in the regional model, but only at the locations of the data and these changes in confidence would have been of little significance in relation to implications for the local model area and would not, therefore, have been of any real significance to design or safety assessment. These omissions are judged to have little or no negative impact on confidence in the Laxemar subarea model. In fact, identification of unreliable data and their elimination should have a positive effect on confidence. Poor precision in the measured data is judged to have a limited impact on uncertainties in the site descriptive model, with the exceptions of interpretation and combination of borehole and outcrop fracture data and general uncertainties in sorption data

  8. Description and biological notes of the first species of Xenos (Strepsiptera:Stylopidae) parasitic in Polistes carnifex F. (Hymenoptera:Vespidae) in Mexico

    DEFF Research Database (Denmark)

    Kathirithamby, J.; Hughes, David P.

    2006-01-01

    A description and biological notes on the first species of Xenos (X. hamiltoni) (Strepsiptera: Stylopidae) parasitic in Polistes carnifex F. from Mexico is given. A list of Strepsiptera and their hosts from Mexico is provided.......A description and biological notes on the first species of Xenos (X. hamiltoni) (Strepsiptera: Stylopidae) parasitic in Polistes carnifex F. from Mexico is given. A list of Strepsiptera and their hosts from Mexico is provided....

  9. Description of mathematical models and computer programs

    International Nuclear Information System (INIS)

    1977-01-01

    The paper gives a description of mathematical models and computer programs for analysing possible strategies for spent fuel management, with emphasis on economic analysis. The computer programs developed, describe the material flows, facility construction schedules, capital investment schedules and operating costs for the facilities used in managing the spent fuel. The computer programs use a combination of simulation and optimization procedures for the economic analyses. Many of the fuel cycle steps (such as spent fuel discharges, storage at the reactor, and transport to the RFCC) are described in physical and economic terms through simulation modeling, while others (such as reprocessing plant size and commissioning schedules, interim storage facility commissioning schedules etc.) are subjected to economic optimization procedures to determine the approximate lowest-cost plans from among the available feasible alternatives

  10. Redundancy-Aware Topic Modeling for Patient Record Notes

    Science.gov (United States)

    Cohen, Raphael; Aviram, Iddo; Elhadad, Michael; Elhadad, Noémie

    2014-01-01

    The clinical notes in a given patient record contain much redundancy, in large part due to clinicians’ documentation habit of copying from previous notes in the record and pasting into a new note. Previous work has shown that this redundancy has a negative impact on the quality of text mining and topic modeling in particular. In this paper we describe a novel variant of Latent Dirichlet Allocation (LDA) topic modeling, Red-LDA, which takes into account the inherent redundancy of patient records when modeling content of clinical notes. To assess the value of Red-LDA, we experiment with three baselines and our novel redundancy-aware topic modeling method: given a large collection of patient records, (i) apply vanilla LDA to all documents in all input records; (ii) identify and remove all redundancy by chosing a single representative document for each record as input to LDA; (iii) identify and remove all redundant paragraphs in each record, leaving partial, non-redundant documents as input to LDA; and (iv) apply Red-LDA to all documents in all input records. Both quantitative evaluation carried out through log-likelihood on held-out data and topic coherence of produced topics and qualitative assessement of topics carried out by physicians show that Red-LDA produces superior models to all three baseline strategies. This research contributes to the emerging field of understanding the characteristics of the electronic health record and how to account for them in the framework of data mining. The code for the two redundancy-elimination baselines and Red-LDA is made publicly available to the community. PMID:24551060

  11. Note on the butterfly effect in holographic superconductor models

    Energy Technology Data Exchange (ETDEWEB)

    Ling, Yi, E-mail: lingy@ihep.ac.cn [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Shanghai Key Laboratory of High Temperature Superconductors, Shanghai 200444 (China); School of Physics, University of Chinese Academy of Sciences, Beijing 100049 (China); Liu, Peng, E-mail: liup51@ihep.ac.cn [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Wu, Jian-Pin, E-mail: jianpinwu@mail.bnu.edu.cn [Institute of Gravitation and Cosmology, Department of Physics, School of Mathematics and Physics, Bohai University, Jinzhou 121013 (China); Shanghai Key Laboratory of High Temperature Superconductors, Shanghai 200444 (China)

    2017-05-10

    In this note we remark that the butterfly effect can be used to diagnose the phase transition of superconductivity in a holographic framework. Specifically, we compute the butterfly velocity in a charged black hole background as well as anisotropic backgrounds with Q-lattice structure. In both cases we find its derivative to the temperature is discontinuous at critical points. We also propose that the butterfly velocity can signalize the occurrence of thermal phase transition in general holographic models.

  12. Note on the butterfly effect in holographic superconductor models

    Directory of Open Access Journals (Sweden)

    Yi Ling

    2017-05-01

    Full Text Available In this note we remark that the butterfly effect can be used to diagnose the phase transition of superconductivity in a holographic framework. Specifically, we compute the butterfly velocity in a charged black hole background as well as anisotropic backgrounds with Q-lattice structure. In both cases we find its derivative to the temperature is discontinuous at critical points. We also propose that the butterfly velocity can signalize the occurrence of thermal phase transition in general holographic models.

  13. Coendutermes tucum Fontes (Isoptera, Termitidae, Nasutitermitinae): description of the imago caste and additional notes.

    Science.gov (United States)

    Cuezzo, Carolina

    2016-12-09

    Coendutermes Fontes, 1985 is a monotypic South American termite genus. Coendutermes tucum Fontes, 1985, was described based on morphological characters from soldiers and workers collected in Mato Grosso, Brazil, and Jodensavanne, Suriname. Herein, I describe the imago caste of C. tucum for the first time with additional notes on soldiers, workers, and new distributional records. The studied material is deposited at the Museu de Zoologia da Universidade de São Paulo, São Paulo, Brazil (MZUSP). I use the terminology of Fontes (1987) to describe worker mandibles, and that of Noirot (2001) for the different parts of the digestive tube of workers. I measured the imagoes morphometric characters following Roonwal (1970): LH, length of head capsule (9); WH, width of head capsule without eyes (18); OF, occipito-fontanelle distance (23); DE, diameter of eye (48); LO, length of ocellus (55); WO, width of ocellus (56); EOD, eye-ocellus distance (57); LP, length of pronotum (65); WP, width of pronotum (68); LT, length of hind tibia (85). I took photographs of all castes with a stereomicroscope (Leica M205C) attached to a video camera (Leica DFC295) and images of gizzard and enteric valve under a microscope (Leica DM750B) attached to a video camera (Leica ICC50HD), then I combined the stacks of images with the software Leica LAS EZ 2.0 or Helicon Focus 5.2.11 X64. For the scanning electron micrographs (SEM), one soldier was dried to critical point while directly mounted on a stub with double face adhesive tape, then coated with gold and photographed with the SEM (Zeiss LEO 440 ®).

  14. Technical Note: Ozonesonde climatology between 1995 and 2011: description, evaluation and applications

    Science.gov (United States)

    Tilmes, S.; Lamarque, J.-F.; Emmons, L. K.; Conley, A.; Schultz, M. G.; Saunois, M.; Thouret, V.; Thompson, A. M.; Oltmans, S. J.; Johnson, B.; Tarasick, D.

    2012-08-01

    An ozone climatology based on ozonesonde measurements taken over the last 17 yr has been constructed for model evaluation and comparisons to other observations. Vertical ozone profiles for 42 stations around the globe have been compiled for the period 1995-2011, in pressure and tropopause-referenced altitudes. For each profile, the mean, standard deviation, median, the half-width are provided, as well as information about interannual variability. Regional aggregates are formed in combining stations with similar ozone characteristics. The Hellinger distance is introduced as a new diagnostic to identify stations that describe similar shapes of ozone probability distribution functions (PDFs). In this way, 12 regions were selected covering at least 2 stations and the variability among those stations is discussed. Significant variability with longitude of ozone distributions in the troposphere and lower stratosphere in the northern mid- and high latitudes is found. The representativeness of regional aggregates is discussed for high northern latitudes, Western Europe, Eastern US, and Japan, using independent observations from surface stations and MOZAIC aircraft data. Good agreement exists between ozonesondes and aircraft observations in the mid-troposphere and between ozonesondes and surface observations for Western Europe. For Eastern US and high northern latitudes, surface ozone values from ozonesondes are biased 10 ppb high compared to independent measurements. An application of the climatology is presented using the NCAR CAM-Chem model. The climatology allows evaluation of the model performance regarding ozone averages, seasonality, interannual variability, and the shape of ozone distributions. The new assessment of the key features of ozone distributions gives deeper insights into the performance of models.

  15. Technical Note: Ozonesonde climatology between 1995 and 2011: description, evaluation and applications

    Directory of Open Access Journals (Sweden)

    S. Tilmes

    2012-08-01

    Full Text Available An ozone climatology based on ozonesonde measurements taken over the last 17 yr has been constructed for model evaluation and comparisons to other observations. Vertical ozone profiles for 42 stations around the globe have been compiled for the period 1995–2011, in pressure and tropopause-referenced altitudes. For each profile, the mean, standard deviation, median, the half-width are provided, as well as information about interannual variability. Regional aggregates are formed in combining stations with similar ozone characteristics. The Hellinger distance is introduced as a new diagnostic to identify stations that describe similar shapes of ozone probability distribution functions (PDFs. In this way, 12 regions were selected covering at least 2 stations and the variability among those stations is discussed. Significant variability with longitude of ozone distributions in the troposphere and lower stratosphere in the northern mid- and high latitudes is found. The representativeness of regional aggregates is discussed for high northern latitudes, Western Europe, Eastern US, and Japan, using independent observations from surface stations and MOZAIC aircraft data. Good agreement exists between ozonesondes and aircraft observations in the mid-troposphere and between ozonesondes and surface observations for Western Europe. For Eastern US and high northern latitudes, surface ozone values from ozonesondes are biased 10 ppb high compared to independent measurements. An application of the climatology is presented using the NCAR CAM-Chem model. The climatology allows evaluation of the model performance regarding ozone averages, seasonality, interannual variability, and the shape of ozone distributions. The new assessment of the key features of ozone distributions gives deeper insights into the performance of models.

  16. A Note on Realistic Dividends in Actuarial Surplus Models

    Directory of Open Access Journals (Sweden)

    Benjamin Avanzi

    2016-10-01

    Full Text Available Because of the profitable nature of risk businesses in the long term, de Finetti suggested that surplus models should allow for cash leakages, as otherwise the surplus would unrealistically grow (on average to infinity. These leakages were interpreted as ‘dividends’. Subsequent literature on actuarial surplus models with dividend distribution has mainly focussed on dividend strategies that either maximise the expected present value of dividends until ruin or lead to a probability of ruin that is less than one (see Albrecher and Thonhauser, Avanzi for reviews. An increasing number of papers are directly interested in modelling dividend policies that are consistent with actual practice in financial markets. In this short note, we review the corporate finance literature with the specific aim of fleshing out properties that dividend strategies should ideally satisfy, if one wants to model behaviour that is consistent with practice.

  17. Technical note: The Lagrangian particle dispersion model FLEXPART version 6.2

    Directory of Open Access Journals (Sweden)

    A. Stohl

    2005-01-01

    Full Text Available The Lagrangian particle dispersion model FLEXPART was originally (about 8 years ago designed for calculating the long-range and mesoscale dispersion of air pollutants from point sources, such as after an accident in a nuclear power plant. In the meantime FLEXPART has evolved into a comprehensive tool for atmospheric transport modeling and analysis. Its application fields were extended from air pollution studies to other topics where atmospheric transport plays a role (e.g., exchange between the stratosphere and troposphere, or the global water cycle. It has evolved into a true community model that is now being used by at least 25 groups from 14 different countries and is seeing both operational and research applications. A user manual has been kept actual over the years and was distributed over an internet page along with the model's source code. In this note we provide a citeable technical description of FLEXPART's latest version (6.2.

  18. A hybrid model for automatic emotion recognition in suicide notes.

    Science.gov (United States)

    Yang, Hui; Willis, Alistair; de Roeck, Anne; Nuseibeh, Bashar

    2012-01-01

    We describe the Open University team's submission to the 2011 i2b2/VA/Cincinnati Medical Natural Language Processing Challenge, Track 2 Shared Task for sentiment analysis in suicide notes. This Shared Task focused on the development of automatic systems that identify, at the sentence level, affective text of 15 specific emotions from suicide notes. We propose a hybrid model that incorporates a number of natural language processing techniques, including lexicon-based keyword spotting, CRF-based emotion cue identification, and machine learning-based emotion classification. The results generated by different techniques are integrated using different vote-based merging strategies. The automated system performed well against the manually-annotated gold standard, and achieved encouraging results with a micro-averaged F-measure score of 61.39% in textual emotion recognition, which was ranked 1st place out of 24 participant teams in this challenge. The results demonstrate that effective emotion recognition by an automated system is possible when a large annotated corpus is available.

  19. A new species of the genus Ambrostoma Motschulsky (Coleoptera, Chrysomelidae, Chrysomelinae) from South Korea, with larval descriptions and biological notes.

    Science.gov (United States)

    Cho, Hee-Wook; Borowiec, Lech

    2013-01-01

    Ambrostoma koreana sp. n. is described from South Korea. Detailed descriptions and illustrations of adult and all larval instars are provided and differences to closely related species are discussed. Ovoviviparity is reported for the first time in the genus Ambrostoma. Notes on distribution, host plant and biology are also provided.

  20. The anchor integration model: A descriptive model of anchoring effects.

    Science.gov (United States)

    Turner, Brandon M; Schley, Dan R

    2016-11-01

    Few experimental effects in the psychology of judgment and decision making have been studied as meticulously as the anchoring effect. Although the existing literature provides considerable insight into the psychological processes underlying anchoring effects, extant theories up to this point have only generated qualitative predictions. While these theories have been productive in advancing our understanding of the underlying anchoring process, they leave much to be desired in the interpretation of specific anchoring effects. In this article, we introduce the Anchor Integration Model (AIM) as a descriptive tool for the measurement and quantification of anchoring effects. We develop two versions the model: one suitable for assessing between-participant anchoring effects, and another for assessing individual differences in anchoring effects. We then fit each model to data from two experiments, and demonstrate the model's utility in describing anchoring effects. Copyright © 2016 Elsevier Inc. All rights reserved.

  1. Technical note: A noniterative approach to modelling moist thermodynamics

    Science.gov (United States)

    Moisseeva, Nadya; Stull, Roland

    2017-12-01

    Formulation of noniterative mathematical expressions for moist thermodynamics presents a challenge for both numerical and theoretical modellers. This technical note offers a simple and efficient tool for approximating two common thermodynamic relationships: temperature, T, at a given pressure, P, along a saturated adiabat, T(P, θw), as well as its corresponding inverse form θw(P, T), where θw is wet-bulb potential temperature. Our method allows direct calculation of T(P, θw) and θw(P, T) on a thermodynamic domain bounded by -70 ≤ θw 1 kPa and -100 ≤ T 1 kPa, respectively. The proposed parameterizations offer high accuracy (mean absolute errors of 0.016 and 0.002 °C for T(P, θw) and θw(P, T), respectively) on a notably larger thermodynamic region than previously studied. The paper includes a method summary and a ready-to-use tool to aid atmospheric physicists in their practical applications.

  2. A Description Logic Based Knowledge Representation Model for Concept Understanding

    DEFF Research Database (Denmark)

    Badie, Farshad

    2018-01-01

    This research employs Description Logics in order to focus on logical description and analysis of the phenomenon of ‘concept understanding’. The article will deal with a formal-semantic model for figuring out the underlying logical assumptions of ‘concept understanding’ in knowledge representation...

  3. Scattering in Soliton Models and the Bosonic Exchange description

    OpenAIRE

    Coriano', Claudio; Parwani, Rajesh R.; Yamagishi, Hidenaga; Zahed, Ismail

    1992-01-01

    We argue that the description of meson-nucleon dynamics based on the boson-exchange approach, is compatible with the description of the nucleon as a soliton in the nonrelativistic limit. Our arguments are based on an analysis of the meson-soliton form factor and the exact meson-soliton and soliton-soliton scattering amplitudes in the Sine-Gordon model.

  4. Domain Endurants: An Analysis and Description Process Model

    DEFF Research Database (Denmark)

    Bjørner, Dines

    2014-01-01

    We present a summary, Sect. 2, of a structure of domain analysis and description concepts: techniques and tools. And we link, in Sect. 3, these concepts, embodied in domain analysis prompts and domain description prompts, in a model of how a diligent domain analyser cum describer would use them. ...

  5. Adding Curvature to Minimum Description Length Shape Models

    DEFF Research Database (Denmark)

    Thodberg, Hans Henrik; Ólafsdóttir, Hildur

    2003-01-01

    The Minimum Description Length (MDL) approach to shape modelling seeks a compact description of a set of shapes in terms of the coordinates of marks on the shapes. It has been shown that the mark positions resulting from this optimisation to a large extent solve the so-called point correspondence...

  6. Projected shell model description for nuclear isomers

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Y. [Department of Physics, Shanghai Jiao Tong University, Shanghai 200240, Popular Republic (China)

    2008-12-15

    The study of nuclear isomer properties is a current research focus. To describe isomers, we present a method based on the Projected Shell Model. Two kinds of isomers, {kappa}-isomers and shape isomers, are discussed. For the {kappa}-isomer treatment, {kappa}-mixing is properly implemented in the model. It is found however that in order to describe the strong {kappa}-violation more efficiently, it may be necessary to further introduce triaxiality into the shell model basis. To treat shape isomers, a scheme is outlined which allows mixing those configurations belonging to different shapes. (Author)

  7. Description of the Battlescale Forecast Model

    National Research Council Canada - National Science Library

    Henmi, Teizi

    1998-01-01

    .... Army Integrated Meteorological System Block II software. The Battlescale Forecast Model can be used operationally over any part of the world by using meteorological data obtained through the Automated Weather Distribution System...

  8. The study of prescriptive and descriptive models of decision making

    OpenAIRE

    Ashok A Divekar; Sunita Bangal; Sumangala D.

    2012-01-01

    The field of decision making can be loosely divided into two parts: the study of prescriptive models and the study of descriptive models. Prescriptive decision scientists are concerned with prescribing methods for making optimal decisions. Descriptive decision researchers are concerned with the bounded way in which the decisions are actually made. The statistics courses treat risk from a prescriptive, by suggesting rational methods. This paper brings out the work done by many researchers by e...

  9. Description of a comprehensive mathematical model

    DEFF Research Database (Denmark)

    Li, Xiyan; Yin, Chungen

    2017-01-01

    Biomass gasification is still a promising technology after over 30 years’ research and development and has success only in a few niche markets. In this paper, a comprehensive mathematical model for biomass particle gasification is developed within a generic particle framework, assuming the feed i...

  10. The self-description data configuration model

    Energy Technology Data Exchange (ETDEWEB)

    Abadie, Lana, E-mail: lana.abadie@iter.org [ITER Organization, Route de vinon sur Verdon, 13115 St Paul Lez Durance (France); Di Maio, Franck; Klotz, Wolf-Dieter; Mahajan, Kirti; Stepanov, Denis; Utzel, Nadine; Wallander, Anders [ITER Organization, Route de vinon sur Verdon, 13115 St Paul Lez Durance (France)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer We use the relational model to represent the configuration data for ITER. Black-Right-Pointing-Pointer We explain the different modeled views namely physical, functional and control. Black-Right-Pointing-Pointer We explain how this information is used to generate configuration files. Black-Right-Pointing-Pointer We explain that this information is validated. - Abstract: ITER will consist of roughly 160 plant systems I and C delivered in kind which need to be integrated into the ITER control infrastructure. To make the integration of all these plant systems I and C, a smooth operation, the CODAC (Controls, Data Access and Communications) group release every year the core software environment which consists of many applications. In this paper we would like to describe what configuration data and how it is modeled in the version 2. The model is based on three views, the physical one which lists the components with their signals, the functional view which describes the control functions and variables required to implement them and the control view which links the two previous views. We use Hibernate as an ORM (Object Relational Mapping) framework with a PostgreSQL database and Spring as a framework to handle transactions.

  11. Model description and evaluation of model performance: DOSDIM model

    International Nuclear Information System (INIS)

    Lewyckyj, N.; Zeevaert, T.

    1996-01-01

    DOSDIM was developed to assess the impact to man from routine and accidental atmospheric releases. It is a compartmental, deterministic, radiological model. For an accidental release, dynamic transfer are used in opposition to a routine release for which equilibrium transfer factors are used. Parameters values were chosen to be conservative. Transfer between compartments are described by first-order differential equations. 2 figs

  12. Social European Model between Descriptive and Contrafactual

    Directory of Open Access Journals (Sweden)

    Liviu-Catalin Moraru

    2006-05-01

    Full Text Available Romania is about to become a member of EU and to participate, in an active way, to the european dream. After a short presentation of the origins of social market economy, authors analyze european social model, emphasizing the main dificulties of the present european construction. The paper ends with a comparative analisys of two different economic policies, being offered strong arguments in favor of pro-market policies. On long term, the only way to increase the economic prosperity (in the EU is by stimulating institutional competition, protecting property rights and liberty in order to increase welfare, and not by redistribution and uniformization.

  13. Linking statistical bias description to multiobjective model calibration

    Science.gov (United States)

    Reichert, P.; Schuwirth, N.

    2012-09-01

    In the absence of model deficiencies, simulation results at the correct parameter values lead to an unbiased description of observed data with remaining deviations due to observation errors only. However, this ideal cannot be reached in the practice of environmental modeling, because the required simplified representation of the complex reality by the model and errors in model input lead to errors that are reflected in biased model output. This leads to two related problems: First, ignoring bias of output in the statistical model description leads to bias in parameter estimates, model predictions and, in particular, in the quantification of their uncertainty. Second, as there is no objective choice of how much bias to accept in which output variable, it is not possible to design an "objective" model calibration procedure. The first of these problems has been addressed by introducing a statistical (Bayesian) description of bias, the second by suggesting the use of multiobjective calibration techniques that cannot easily be used for uncertainty analysis. We merge the ideas of these two approaches by using the prior of the statistical bias description to quantify the importance of multiple calibration objectives. This leads to probabilistic inference and prediction while still taking multiple calibration objectives into account. The ideas and technical details of the suggested approach are outlined and a didactical example as well as an application to environmental data are provided to demonstrate its practical feasibility and computational efficiency.

  14. Notes on the frugivorous fruit fly (Diptera: Tephritidae fauna of western Africa, with description of a new Dacus species

    Directory of Open Access Journals (Sweden)

    Kim F.M. Goodger

    2013-07-01

    Full Text Available The species richness of the frugivorous fruit fly fauna of western African (in particular of Ivory Coast, Ghana, Togo, Benin and Nigeria is discussed. The diversity is compared at a national level and between the ecoregions within the national boundaries of the study area. A new species, Dacus goergeni sp. nov. is described and additional taxonomic notes are presented.

  15. Geology Laxemar. Site descriptive modelling SDM-Site Laxemar

    International Nuclear Information System (INIS)

    Wahlgren, Carl-Henric; Curtis, Philip; Hermanson, Jan; Forssberg, Ola; Oehman, Johan; Fox, Aaron; La Pointe, Paul; Drake, Henrik; Triumf, Carl-Axel; Mattsson, Haakan; Thunehed, Hans; Juhlin, Christopher

    2008-11-01

    , kinematics of brittle deformation in drill cores and outcrops, as well as studies with particular focus on minor deformation zones (MDZ) in both drill cores and in the field. Complementary geochronological and other rock and fracture analytical data. High resolution airborne laser scanning (LIDAR) leading to a new digital elevation model (DEM) together with high-resolution ground magnetic and resistivity data providing the basis for further lineament interpretations. Further seismic refraction surveys and reprocessing and re-evaluation of seismic reflection data. The outputs of the deterministic modelling work are geometric models in RVS format for rock domains, deformation zones and fracture domains, including detailed property tables for rock domains and deformation zones and a description of fracture domains. The outputs of the geological DFN modelling process are recommended parameters or statistical distributions that describe fracture set orientations, sizes, volumetric intensities, spatial correlations and models, and other parameters (lithology and scaling corrections, termination matrices) that are necessary for building stochastic models. The regional scale ductile deformation zones strike NNE-SSW and NE-SW, are subvertical and are characterised by sinistral strike-slip displacements, while E-W oriented zones, though more strongly overprinted by brittle deformation, display moderate to steep dips to the south or north. The kinematics of the latter are not resolved at Laxemar, but E-W ductile shear zones in the Simpevarp subarea show complex kinematics, including both reverse and normal dip-slip as well as sinistral and dextral strike-slip displacements. It should be noted that the regional and local major deformation zones, although the majority have a ductile precursor, are mainly brittle in character. The focussed volume is transected by a series of smaller deformation zones with a variety of orientations and with dips varying from sub-vertical to sub

  16. Polyphonic Piano Transcription with a Note-Based Music Language Model

    Directory of Open Access Journals (Sweden)

    Qi Wang

    2018-03-01

    Full Text Available This paper proposes a note-based music language model (MLM for improving note-level polyphonic piano transcription. The MLM is based on the recurrent structure, which could model the temporal correlations between notes in music sequences. To combine the outputs of the note-based MLM and acoustic model directly, an integrated architecture is adopted in this paper. We also propose an inference algorithm, in which the note-based MLM is used to predict notes at the blank onsets in the thresholding transcription results. The experimental results show that the proposed inference algorithm improves the performance of note-level transcription. We also observe that the combination of the restricted Boltzmann machine (RBM and recurrent structure outperforms a single recurrent neural network (RNN or long short-term memory network (LSTM in modeling the high-dimensional note sequences. Among all the MLMs, LSTM-RBM helps the system yield the best results on all evaluation metrics regardless of the performance of acoustic models.

  17. Geology Laxemar. Site descriptive modelling SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    Wahlgren, Carl-Henric (Geological Survey of Sweden, Uppsala (Sweden)); Curtis, Philip; Hermanson, Jan; Forssberg, Ola; Oehman, Johan (Golder Associates AB (Sweden)); Fox, Aaron; La Pointe, Paul (Golder Associates Inc (United States)); Drake, Henrik (Dept. of Earth Sciences, Univ. of Goeteborg, Goeteborg (Sweden)); Triumf, Carl-Axel; Mattsson, Haakan; Thunehed, Hans (GeoVista AB, Luleaa (Sweden)); Juhlin, Christopher (Dept. of Earth Sciences, Uppsala Univ., Uppsala (Sweden))

    2008-11-15

    , kinematics of brittle deformation in drill cores and outcrops, as well as studies with particular focus on minor deformation zones (MDZ) in both drill cores and in the field. Complementary geochronological and other rock and fracture analytical data. High resolution airborne laser scanning (LIDAR) leading to a new digital elevation model (DEM) together with high-resolution ground magnetic and resistivity data providing the basis for further lineament interpretations. Further seismic refraction surveys and reprocessing and re-evaluation of seismic reflection data. The outputs of the deterministic modelling work are geometric models in RVS format for rock domains, deformation zones and fracture domains, including detailed property tables for rock domains and deformation zones and a description of fracture domains. The outputs of the geological DFN modelling process are recommended parameters or statistical distributions that describe fracture set orientations, sizes, volumetric intensities, spatial correlations and models, and other parameters (lithology and scaling corrections, termination matrices) that are necessary for building stochastic models. The regional scale ductile deformation zones strike NNE-SSW and NE-SW, are subvertical and are characterised by sinistral strike-slip displacements, while E-W oriented zones, though more strongly overprinted by brittle deformation, display moderate to steep dips to the south or north. The kinematics of the latter are not resolved at Laxemar, but E-W ductile shear zones in the Simpevarp subarea show complex kinematics, including both reverse and normal dip-slip as well as sinistral and dextral strike-slip displacements. It should be noted that the regional and local major deformation zones, although the majority have a ductile precursor, are mainly brittle in character. The focussed volume is transected by a series of smaller deformation zones with a variety of orientations and with dips varying from sub-vertical to sub

  18. Notes on the genus Psathyrella-VIII. Description of and key to the European species of section Hydrophilae

    NARCIS (Netherlands)

    Kits van Waveren, E.

    1982-01-01

    A description of and key to twelve species of Psathyrella section Hydrophilea (Romagn.) ex Sing. emend. Kits van Wav. is given. These species are: P. hydrophila, P. hydrophiloides (spec. nov., = Drosophila pilulaeformis ss. Kühn. & Romagn.), P. laevissima, P. subpapillata (comb. nov.), P. fragrans

  19. Descriptive and mechanistic models of crop–weed competition

    NARCIS (Netherlands)

    Bastiaans, L.; Storkey, J.

    2017-01-01

    Crop-weed competitive relations are an important element of agroecosystems. Quantifying and understanding them helps to design appropriate weed management at operational, tactical and strategic level. This chapter presents and discusses simple descriptive and more mechanistic models for crop-weed

  20. Organization model and formalized description of nuclear enterprise information system

    International Nuclear Information System (INIS)

    Yuan Feng; Song Yafeng; Li Xudong

    2012-01-01

    Organization model is one of the most important models of Nuclear Enterprise Information System (NEIS). Scientific and reasonable organization model is the prerequisite that NEIS has robustness and extendibility, and is also the foundation of the integration of heterogeneous system. Firstly, the paper describes the conceptual model of the NEIS on ontology chart, which provides a consistent semantic framework of organization. Then it discusses the relations between the concepts in detail. Finally, it gives the formalized description of the organization model of NEIS based on six-tuple array. (authors)

  1. A note on: an empirical comparison of forgetting models

    OpenAIRE

    Sikström, Sverker; Jaber, Mohamad Y.

    2004-01-01

    In the above paper, Nembhard and Osothsilp (2001) empirically compared several forgetting models against empirical data on production breaks. Among the models compared was the learn–forget curve model (LFCM) developed by Jaber and Bonney(1996). In previous research, several studies have shown that the LFCM is advantageous to some of the models being investigated, however, Nembhard and Osothsilp (2001) found that the LFCM showed the largest deviation from empirical data. In this commentary, we...

  2. A Note on the Identifiability of Generalized Linear Mixed Models

    DEFF Research Database (Denmark)

    Labouriau, Rodrigo

    2014-01-01

    I present here a simple proof that, under general regularity conditions, the standard parametrization of generalized linear mixed model is identifiable. The proof is based on the assumptions of generalized linear mixed models on the first and second order moments and some general mild regularity ...... conditions, and, therefore, is extensible to quasi-likelihood based generalized linear models. In particular, binomial and Poisson mixed models with dispersion parameter are identifiable when equipped with the standard parametrization...

  3. A note on the criticisms against the internationalization process model

    OpenAIRE

    Hadjikhani, Amjad

    1997-01-01

    The internationalization process model introduced three decades ago still influences international business studies. Since that time, a growing number of researchers have tested the model to show its strengths and weaknesses. Among the critics, some focus on the weakness of the theoretical aspects, while others argue against parts of the model. This paper will review these criticisms and compare them with the original ideas in the internationalization model. One criticized aspect of the inter...

  4. Description of two new Calicnemia from Vietnam and central Laos with notes on their congeners in Vietnam (Odonata: Platycnemididae).

    Science.gov (United States)

    Phan, Quoc Toan; Kompier, Tom; Karube, Haruki

    2017-02-16

    Descriptions are given of two new species of Calicnemia: C. akahara sp. nov. from central and southern Vietnam and C. hamata sp. nov. from central Laos. C. soccifera Yu & Chen, 2013, and C. haksik Wilson & Reels, 2003, are recorded for the first time from Vietnam; C. uenoi Asahina, 1997, is redescribed with new illustrations provided of its anal appendages and genital ligula; and the occurrence of C. mortoni (Laidlaw, 1917) in Vietnam is discussed.

  5. A note on moving average models for Gaussian random fields

    DEFF Research Database (Denmark)

    Hansen, Linda Vadgård; Thorarinsdottir, Thordis L.

    basis, a general modeling framework which includes several types of non-Gaussian models. We propose a new one-parameter spatial correlation model which arises from a power kernel and show that the associated Hausdorff dimension of the sample paths can take any value between 2 and 3. As a result...

  6. Potential model description of heavy ion elastic and inelastic scattering

    International Nuclear Information System (INIS)

    Satchler, G.R.

    1976-01-01

    Calculations for a potential-model description of heavy-ion elastic and inelastic scattering attempt to follow the readjustments that the two ions must make as they begin to interact and imply modifications of the kinetic energy of relative motion as well as the potential energy. Phenomenology and the data, deep or shallow potentials, inelastic scattering, and folded potential models are treated with particular emphasis on the last

  7. Gray-box modelling approach for description of storage tunnel

    DEFF Research Database (Denmark)

    Harremoës, Poul; Carstensen, Jacob

    1999-01-01

    The dynamics of a storage tunnel is examined using a model based on on-line measured data and a combination of simple deterministic and black-box stochastic elements. This approach, called gray-box modeling, is a new promising methodology for giving an on-line state description of sewer systems. ...... in a SCADA system because the most important information on the specific system is provided on-line...

  8. Quality Assurance Based on Descriptive and Parsimonious Appearance Models

    DEFF Research Database (Denmark)

    Nielsen, Jannik Boll; Eiríksson, Eyþór Rúnar; Kristensen, Rasmus Lyngby

    2015-01-01

    In this positional paper, we discuss the potential benefits of using appearance models in additive manufacturing, metal casting, wind turbine blade production, and 3D content acquisition. Current state of the art in acquisition and rendering of appearance cannot easily be used for quality assurance...... in these areas. The common denominator is the need for descriptive and parsimonious appearance models. By ‘parsimonious’ we mean with few parameters so that a model is useful both for fast acquisition, robust fitting, and fast rendering of appearance. The word ‘descriptive’ refers to the fact that a model should...

  9. A note on Markovian manpower models | Osagiede | Journal of the ...

    African Journals Online (AJOL)

    In modelling manpower systems, most authors rely on Markov-based theoretic methodology as an analytic tool to unify the states of the system with the axiomatic foundation that there is a one-stage dependence of events. In this study, Markovian manpower models are surveyed. Specific areas are highlighted as future ...

  10. Multilevel model of polycrystalline materials: grain boundary sliding description

    Science.gov (United States)

    Sharifullina, E.; Shveykin, A.; Trusov, P.

    2017-12-01

    Material behavior description in a wide range of thermomechanical effects is one of the topical areas in mathematical modeling. Inclusion of grain boundary sliding as an important mechanism of polycrystalline material deformation at elevated temperatures and predominant deformation mechanism of metals and alloys in structural superplasticity allows to simulate various deformation regimes and their transitions (including superplasticity regime with switch-on and switch-off regimes). The paper is devoted to description of grain boundary sliding in structure of two-level model, based on crystal plasticity, and relations for determination the contribution of this mechanism to inelastic deformation. Some results are presented concerning computational experiments of polycrystalline representative volume deformation using developed model.

  11. Technical note: Bayesian calibration of dynamic ruminant nutrition models.

    Science.gov (United States)

    Reed, K F; Arhonditsis, G B; France, J; Kebreab, E

    2016-08-01

    Mechanistic models of ruminant digestion and metabolism have advanced our understanding of the processes underlying ruminant animal physiology. Deterministic modeling practices ignore the inherent variation within and among individual animals and thus have no way to assess how sources of error influence model outputs. We introduce Bayesian calibration of mathematical models to address the need for robust mechanistic modeling tools that can accommodate error analysis by remaining within the bounds of data-based parameter estimation. For the purpose of prediction, the Bayesian approach generates a posterior predictive distribution that represents the current estimate of the value of the response variable, taking into account both the uncertainty about the parameters and model residual variability. Predictions are expressed as probability distributions, thereby conveying significantly more information than point estimates in regard to uncertainty. Our study illustrates some of the technical advantages of Bayesian calibration and discusses the future perspectives in the context of animal nutrition modeling. Copyright © 2016 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  12. Short note: the experimental geopotential model XGM2016

    Science.gov (United States)

    Pail, R.; Fecher, T.; Barnes, D.; Factor, J. F.; Holmes, S. A.; Gruber, T.; Zingerle, P.

    2018-04-01

    As a precursor study for the upcoming combined Earth Gravitational Model 2020 (EGM2020), the Experimental Gravity Field Model XGM2016, parameterized as a spherical harmonic series up to degree and order 719, is computed. XGM2016 shares the same combination methodology as its predecessor model GOCO05c (Fecher et al. in Surv Geophys 38(3): 571-590, 2017. doi: 10.1007/s10712-016-9406-y). The main difference between these models is that XGM2016 is supported by an improved terrestrial data set of 15^' × 15^' gravity anomaly area-means provided by the United States National Geospatial-Intelligence Agency (NGA), resulting in significant upgrades compared to existing combined gravity field models, especially in continental areas such as South America, Africa, parts of Asia, and Antarctica. A combination strategy of relative regional weighting provides for improved performance in near-coastal ocean regions, including regions where the altimetric data are mostly unchanged from previous models. Comparing cumulative height anomalies, from both EGM2008 and XGM2016 at degree/order 719, yields differences of 26 cm in Africa and 40 cm in South America. These differences result from including additional information of satellite data, as well as from the improved ground data in these regions. XGM2016 also yields a smoother Mean Dynamic Topography with significantly reduced artifacts, which indicates an improved modeling of the ocean areas.

  13. Short note: the experimental geopotential model XGM2016

    Science.gov (United States)

    Pail, R.; Fecher, T.; Barnes, D.; Factor, J. F.; Holmes, S. A.; Gruber, T.; Zingerle, P.

    2017-10-01

    As a precursor study for the upcoming combined Earth Gravitational Model 2020 (EGM2020), the Experimental Gravity Field Model XGM2016, parameterized as a spherical harmonic series up to degree and order 719, is computed. XGM2016 shares the same combination methodology as its predecessor model GOCO05c (Fecher et al. in Surv Geophys 38(3): 571-590, 2017. doi: 10.1007/s10712-016-9406-y). The main difference between these models is that XGM2016 is supported by an improved terrestrial data set of 15^' × 15^' gravity anomaly area-means provided by the United States National Geospatial-Intelligence Agency (NGA), resulting in significant upgrades compared to existing combined gravity field models, especially in continental areas such as South America, Africa, parts of Asia, and Antarctica. A combination strategy of relative regional weighting provides for improved performance in near-coastal ocean regions, including regions where the altimetric data are mostly unchanged from previous models. Comparing cumulative height anomalies, from both EGM2008 and XGM2016 at degree/order 719, yields differences of 26 cm in Africa and 40 cm in South America. These differences result from including additional information of satellite data, as well as from the improved ground data in these regions. XGM2016 also yields a smoother Mean Dynamic Topography with significantly reduced artifacts, which indicates an improved modeling of the ocean areas.

  14. A model-independent description of few-body system with strong interaction

    International Nuclear Information System (INIS)

    Simenog, I.V.

    1985-01-01

    In this contribution, the authors discuss the formulation of equations that provide model-independent description of systems of three and more nucleons irrespective of the details of the interaction, substantiate the approach, estimate the correction terms with respect to the force range, and give basic qualitative results obtained by means of the model-independent procedure. They consider three nucleons in the doublet state (spin S=I/2) taking into account only S-interaction. The elastic nd-scattering amplitude may be found from the model-independent equations that follow from the Faddeev equations in the short-range-force limit. They note that the solutions of several model-independent equations and basic results obtained with the use of this approach may serve both as a standard solution and starting point in the discussion of various conceptions concerning the details of nuclear interactions

  15. A Note on Realistic Dividends in Actuarial Surplus Models

    OpenAIRE

    Benjamin Avanzi; Vincent Tu; Bernard Wong

    2016-01-01

    Because of the profitable nature of risk businesses in the long term, de Finetti suggested that surplus models should allow for cash leakages, as otherwise the surplus would unrealistically grow (on average) to infinity. These leakages were interpreted as 'dividends'. Subsequent literature on actuarial surplus models with dividend distribution has mainly focussed on dividend strategies that either maximise the expected present value of dividends until ruin or lead to a probability of ruin tha...

  16. A note on vector flux models for radiation dose calculations

    International Nuclear Information System (INIS)

    Kern, J.W.

    1994-01-01

    This paper reviews and extends modelling of anisotropic fluxes for radiation belt protons to provide closed-form equations for vector proton fluxes and proton flux anisotropy in terms of standard omnidirectional flux models. These equations provide a flexible alternative to the date-based vector flux models currently available. At higher energies, anisotropy of trapped proton flux in the upper atmosphere depends strongly on the variation of atmospheric density with altitude. Calculations of proton flux anisotropies using present models require specification of the average atmospheric density along trapped particle trajectories and its variation with mirror point altitude. For an isothermal atmosphere, calculations show that in a dipole magnetic field, the scale height of this trajectory-averaged density closely approximates the scale height of the atmosphere at the mirror point of the trapped particle. However, for the earth's magnetic field, the altitudes of mirror points vary for protons drifting in longitude. This results in a small increase in longitude-averaged scale heights compared to the atmospheric scale heights at minimum mirror point altitudes. The trajectory-averaged scale heights are increased by about 10-20% over scale heights from standard atmosphere models for protons mirroring at altitudes less than 500 km in the South Atlantic Anomaly Atmospheric losses of protons in the geomagnetic field minimum in the South Atlantic Anomaly control proton flux anisotropies of interest for radiation studies in low earth orbit. Standard atmosphere models provide corrections for diurnal, seasonal and solar activity-driven variations. Thus, determination of an ''equilibrium'' model of trapped proton fluxes of a given energy requires using a scale height that is time-averaged over the lifetime of the protons. The trajectory-averaged atmospheric densities calculated here lead to estimates for trapped proton lifetimes. These lifetimes provide appropriate time

  17. Technical note: A linear model for predicting δ13 Cprotein.

    Science.gov (United States)

    Pestle, William J; Hubbe, Mark; Smith, Erin K; Stevenson, Joseph M

    2015-08-01

    Development of a model for the prediction of δ(13) Cprotein from δ(13) Ccollagen and Δ(13) Cap-co . Model-generated values could, in turn, serve as "consumer" inputs for multisource mixture modeling of paleodiet. Linear regression analysis of previously published controlled diet data facilitated the development of a mathematical model for predicting δ(13) Cprotein (and an experimentally generated error term) from isotopic data routinely generated during the analysis of osseous remains (δ(13) Cco and Δ(13) Cap-co ). Regression analysis resulted in a two-term linear model (δ(13) Cprotein (%) = (0.78 × δ(13) Cco ) - (0.58× Δ(13) Cap-co ) - 4.7), possessing a high R-value of 0.93 (r(2)  = 0.86, P analysis of human osseous remains. These predicted values are ideal for use in multisource mixture modeling of dietary protein source contribution. © 2015 Wiley Periodicals, Inc.

  18. Hydrodynamic description of spin Calogero-Sutherland model

    Science.gov (United States)

    Abanov, Alexander; Kulkarni, Manas; Franchini, Fabio

    2009-03-01

    We study a non-linear collective field theory for an integrable spin-Calogero-Sutherland model. The hydrodynamic description of this SU(2) model in terms of charge density, charge velocity and spin currents is used to study non-perturbative solutions (solitons) and examine their correspondence with known quantum numbers of elementary excitations [1]. A conventional linear bosonization or harmonic approximation is not sufficient to describe, for example, the physics of spin-charge (non)separation. Therefore, we need this new collective bosonic field description that captures the effects of the band curvature. In the strong coupling limit [2] this model reduces to integrable SU(2) Haldane-Shastry model. We study a non-linear coupling of left and right spin currents which form a Kac-Moody algebra. Our quantum hydrodynamic description for the spin case is an extension for the one found in the spinless version in [3].[3pt] [1] Y. Kato,T. Yamamoto, and M. Arikawa, J. Phys. Soc. Jpn. 66, 1954-1961 (1997).[0pt] [2] A. Polychronakos, Phys Rev Lett. 70,2329-2331(1993).[0pt] [3] A.G.Abanov and P.B. Wiegmann, Phys Rev Lett 95, 076402(2005)

  19. A Note on Recurring Misconceptions When Fitting Nonlinear Mixed Models.

    Science.gov (United States)

    Harring, Jeffrey R; Blozis, Shelley A

    2016-01-01

    Nonlinear mixed-effects (NLME) models are used when analyzing continuous repeated measures data taken on each of a number of individuals where the focus is on characteristics of complex, nonlinear individual change. Challenges with fitting NLME models and interpreting analytic results have been well documented in the statistical literature. However, parameter estimates as well as fitted functions from NLME analyses in recent articles have been misinterpreted, suggesting the need for clarification of these issues before these misconceptions become fact. These misconceptions arise from the choice of popular estimation algorithms, namely, the first-order linearization method (FO) and Gaussian-Hermite quadrature (GHQ) methods, and how these choices necessarily lead to population-average (PA) or subject-specific (SS) interpretations of model parameters, respectively. These estimation approaches also affect the fitted function for the typical individual, the lack-of-fit of individuals' predicted trajectories, and vice versa.

  20. Technical Note: How to use Winbugs to infer animal models

    DEFF Research Database (Denmark)

    Damgaard, Lars Holm

    2007-01-01

    This paper deals with Bayesian inferences of animal models using Gibbs sampling. First, we suggest a general and efficient method for updating additive genetic effects, in which the computational cost is independent of the pedigree depth and increases linearly only with the size of the pedigree. ...... having Student's t distributions. In conclusion, Winbugs can be used to make inferences in small-sized, quantitative, genetic data sets applying a wide range of animal models that are not yet standard in the animal breeding literature...

  1. Technical note: River modelling to infer flood management framework

    African Journals Online (AJOL)

    River hydraulic models have successfully identified the weaknesses and areas for improvement with respect to flooding in the Sarawak River system, and can also be used to support decisions on flood management measures. Often, the big question is 'how'. This paper demonstrates a theoretical flood management ...

  2. Some notes on unobserved parameters (frailties) in reliability modeling

    International Nuclear Information System (INIS)

    Cha, Ji Hwan; Finkelstein, Maxim

    2014-01-01

    Unobserved random quantities (frailties) often appear in various reliability problems especially when dealing with the failure rates of items from heterogeneous populations. As the failure rate is a conditional characteristic, the distributions of these random quantities, similar to Bayesian approaches, are updated in accordance with the corresponding survival information. At some instances, apart from a statistical meaning, frailties can have also useful interpretations describing the underlying lifetime model. We discuss and clarify these issues in reliability context and present and analyze several meaningful examples. We consider the proportional hazards model with a random factor; the stress–strength model, where the unobserved strength of a system can be viewed as frailty; a parallel system with a random number of components and, finally, the first passage time problem for the Wiener process with random parameters. - Highlights: • We discuss and clarify the notion of frailty in reliability context and present and analyze several meaningful examples. • The paper provides a new insight and general perspective on reliability models with unobserved parameters. • The main message of the paper is well illustrated by several meaningful examples and emphasized by detailed discussion

  3. An elemental diffusion description for LTE plasma models

    Energy Technology Data Exchange (ETDEWEB)

    Hartgers, A; Heijden, H W P van der; Beks, M L; Dijk, J van; Mullen, J A M van der [Department of Physics, Eindhoven University of Technology, PO Box 513, 5600 MB Eindhoven (Netherlands)

    2005-09-21

    A novel method to describe diffusive processes in plasmas in local thermodynamic equilibrium (LTE) was developed, based on the transport of elements instead of individual species. This method combines the elegance of the LTE description of a chemical composition with the flexibility of explicit transport for each element. A simple model of a metal halide lamp containing Hg dosed with NaI is used to illustrate the method.

  4. The Quantum Description of BF Model in Superspace

    Directory of Open Access Journals (Sweden)

    Manoj Kumar Dwivedi

    2018-01-01

    Full Text Available We consider the BRST symmetric four-dimensional BF theory, a topological theory, containing antisymmetric tensor fields in Landau gauge and extend the BRST symmetry by introducing a shift symmetry to it. Within this formulation, the antighost fields corresponding to shift symmetry coincide with antifields of standard field/antifield formulation. Furthermore, we provide a superspace description for the BF model possessing extended BRST and extended anti-BRST transformations.

  5. Notes on some sertulariid hydroids (Cnidaria: Hydrozoa from the tropical western Pacific, with descriptions of nine new species

    Directory of Open Access Journals (Sweden)

    Horia R. Galea

    2016-08-01

    Full Text Available Forty-three species of sertulariid hydroids (Cnidaria: Hydrozoa: Sertulariidae, collected from the tropical western Pacific (Taiwan, Philippines, New Caledonia, French Polynesia, Vanuatu, Fiji, Tonga, Solomon Islands during various expeditions of the French Tropical Deep-Sea Benthos program, are discussed. Of these, nine are new to science: Gonaxia nova sp. nov., G. plumularioides sp. nov., Sertularella folliformis sp. nov., Se. plicata sp. nov., Se. pseudocatena sp. nov., Se. splendida sp. nov., Se. tronconica sp. nov., Se. tubulosa sp. nov., and Symplectoscyphus paucicatillus sp. nov. The subspecies Symplectoscyphus johnstoni (Gray, 1843 tropicus Vervoort, 1993 is raised to species but, in order to avoid the secondary homonymy with Sy. tropicus (Hartlaub, 1901, the replacement name, Sy. fasciculatus nom. nov., is introduced. The male and female gonothecae of Diphasia cristata Billard, 1920, the male gonothecae of Gonaxia elegans Vervoort, 1993, as well as the female gonothecae of Salacia macer Vervoort & Watson, 2003, are described for the first time. Additional notes on the morphology of several other species are provided. All taxa are illustrated, in most cases using figures drawn at the same scale, so as to highlight the differences between related species.

  6. Animal model for endoscopic neurosurgical training: technical note.

    Science.gov (United States)

    Fernandez-Miranda, J C; Barges-Coll, J; Prevedello, D M; Engh, J; Snyderman, C; Carrau, R; Gardner, P A; Kassam, A B

    2010-10-01

    The learning curve for endonasal endoscopic and neuroendoscopic port surgery is long and often associated with an increase in complication rates as surgeons gain experience. We present an animal model for laboratory training aiming to encourage the young generation of neurosurgeons to pursue proficiency in endoscopic neurosurgical techniques. 20 Wistar rats were used as models. The animals were introduced into a physical trainer with multiple ports to carry out fully endoscopic microsurgical procedures. The vertical and horizontal dimensions of the paired ports (simulated nostrils) were: 35×20 mm, 35×15 mm, 25×15 mm, and 25×10 mm. 2 additional single 11.5 mm endoscopic ports were added. Surgical depth varied as desired between 8 and 15 cm. The cervical and abdominal regions were the focus of the endoscopic microsurgical exercises. The different endoscopic neurosurgical techniques were effectively trained at the millimetric dimension. Levels of progressive surgical difficulty depending upon the endoneurosurgical skills set needed for a particular surgical exercise were distinguished. LEVEL 1 is soft-tissue microdissection (exposure of cervical muscular plane and retroperitoneal space); LEVEL 2 is soft-tissue-vascular and vascular-capsule microdissection (aorto-cava exposure, carotid sheath opening, external jugular vein isolation); LEVEL 3 is artery-nerve microdissection (carotid-vagal separation); LEVEL 4 is artery-vein microdissection (aorto-cava separation); LEVEL 5 is vascular repair and microsuturing (aortic rupture), which verified the lack of current proper instrumentation. The animal training model presented here has the potential to shorten the length of the learning curve in endonasal endoscopic and neuroendoscopic port surgery and reduce the incidence of training-related surgical complications. © Georg Thieme Verlag KG Stuttgart · New York.

  7. The first record of Litargus tetraspilotus (Coleoptera, Mycetophagidae in Brazil, with biological notes and complementary description of the species

    Directory of Open Access Journals (Sweden)

    Julianne Milléo

    2011-06-01

    Full Text Available Litargus tetraspilotus LeConte, 1856 was collected feeding on Oidium sp. (Fungi, Ascomycota, Erysiphaceae associated with fruit trees. This is the first time L. tetraspilotus is recorded in Brazil, totaling three species of Mycetophagidae for this country. This study aims to provide a complementary description of this species based on new characters and to present information on its life cycle under laboratory conditions and fluctuation in population in the field. During the period of inventories between July 2004 and August 2006, about every fifteen days, a total of 565 specimens of L. tetraspilotus were collected, with the highest abundance found on citrus plants, with values differing significantly between the two years. The population levels differed between the seasons; spring had the greatest abundance and autumn the least. There was a significant positive correlation of L. tetraspilotus abundance with rainfall and relative humidity. Mycetophagidae, as well as other mycophagous families of Brazilian coleopterans, are barely studied, warranting further future studies of their bioecology and systematics.

  8. Predicate Argument Structure Analysis for Use Case Description Modeling

    Science.gov (United States)

    Takeuchi, Hironori; Nakamura, Taiga; Yamaguchi, Takahira

    In a large software system development project, many documents are prepared and updated frequently. In such a situation, support is needed for looking through these documents easily to identify inconsistencies and to maintain traceability. In this research, we focus on the requirements documents such as use cases and consider how to create models from the use case descriptions in unformatted text. In the model construction, we propose a few semantic constraints based on the features of the use cases and use them for a predicate argument structure analysis to assign semantic labels to actors and actions. With this approach, we show that we can assign semantic labels without enhancing any existing general lexical resources such as case frame dictionaries and design a less language-dependent model construction architecture. By using the constructed model, we consider a system for quality analysis of the use cases and automated test case generation to keep the traceability between document sets. We evaluated the reuse of the existing use cases and generated test case steps automatically with the proposed prototype system from real-world use cases in the development of a system using a packaged application. Based on the evaluation, we show how to construct models with high precision from English and Japanese use case data. Also, we could generate good test cases for about 90% of the real use cases through the manual improvement of the descriptions based on the feedback from the quality analysis system.

  9. THE SHEFFIELD ALCOHOL POLICY MODEL - A MATHEMATICAL DESCRIPTION.

    Science.gov (United States)

    Brennan, Alan; Meier, Petra; Purshouse, Robin; Rafia, Rachid; Meng, Yang; Hill-Macmanus, Daniel; Angus, Colin; Holmes, John

    2014-09-30

    This methodology paper sets out a mathematical description of the Sheffield Alcohol Policy Model version 2.0, a model to evaluate public health strategies for alcohol harm reduction in the UK. Policies that can be appraised include a minimum price per unit of alcohol, restrictions on price discounting, and broader public health measures. The model estimates the impact on consumers, health services, crime, employers, retailers and government tax revenues. The synthesis of public and commercial data sources to inform the model structure is described. A detailed algebraic description of the model is provided. This involves quantifying baseline levels of alcohol purchasing and consumption by age and gender subgroups, estimating the impact of policies on consumption, for example, using evidence on price elasticities of demand for alcohol, quantification of risk functions relating alcohol consumption to harms including 47 health conditions, crimes, absenteeism and unemployment, and finally monetary valuation of the consequences. The results framework, shown for a minimum price per unit of alcohol, has been used to provide policy appraisals for the UK government policy-makers. In discussion and online appendix, we explore issues around valuation and scope, limitations of evidence/data, how the framework can be adapted to other countries and decisions, and ongoing plans for further development. © 2014 The Authors. Health Economics published by John Wiley & Sons Ltd. © 2014 The Authors. Health Economics published by John Wiley & Sons Ltd.

  10. Towards an infrastructure description language for modeling computing infrastructures

    NARCIS (Netherlands)

    Ghijsen, M.; van der Ham, J.; Grosso, P.; de Laat, C.

    2012-01-01

    This paper describes the Infrastructure and Network Description Language (INDL). The aim of INDL is to provide technology independent descriptions of computing infrastructures. These descriptions include the physical resources and the network infrastructure that connects these resources. The

  11. Modeling RHIC using the standard machine formal accelerator description

    International Nuclear Information System (INIS)

    Pilat, F.; Trahern, C.G.; Wei, J.

    1997-01-01

    The Standard Machine Format (SMF) is a structured description of accelerator lattices which supports both the hierarchy of beam lines and generic lattice objects as well as those deviations (field errors, alignment efforts, etc.) associated with each component of the as-installed machine. In this paper we discuss the use of SMF to describe the Relativistic Heavy Ion Collider (RHIC) as well as the ancillary data structures (such as field quality measurements) that are necessarily incorporated into the RHIC SMF model. Future applications of SMF are outlined, including its use in the RHIC operational environment

  12. ECOPATH: Model description and evaluation of model performance

    International Nuclear Information System (INIS)

    Bergstroem, U.; Nordlinder, S.

    1996-01-01

    The model is based upon compartment theory and it is run in combination with a statistical error propagation method (PRISM, Gardner et al. 1983). It is intended to be generic for application on other sites with simple changing of parameter values. It was constructed especially for this scenario. However, it is based upon an earlier designed model for calculating relations between released amount of radioactivity and doses to critical groups (used for Swedish regulations concerning annual reports of released radioactivity from routine operation of Swedish nuclear power plants (Bergstroem och Nordlinder, 1991)). The model handles exposure from deposition on terrestrial areas as well as deposition on lakes, starting with deposition values. 14 refs, 16 figs, 7 tabs

  13. Modeling RHIC Using the Standard Machine Format Accelerator Description

    Science.gov (United States)

    Pilat, F.; Trahern, C. G.; Wei, J.; Satogata, T.; Tepikian, S.

    1997-05-01

    The Standard Machine Format (SMF)(N. Malitsky, R. Talman, et. al., A Proposed Flat Yet Hierarchical Accelerator Lattice Object Model), Particle Accel. 55, 313(1996). is a structured description of accelerator lattices which supports both the hierarchy of beam lines and generic lattice objects as well as the deviations (field errors, misalignments, etc.) associated with each distinct component which are necessary for accurate modeling of beam dynamics. In this paper we discuss the use of SMF to describe the Relativistic Heavy Ion Collider (RHIC) as well as the ancillary data structures (such as field quality measurements) that are necessarily incorporated into the RHIC SMF model. Future applications of SMF are outlined, including its use in the RHIC operational environment.

  14. FARMLAND: Model description and evaluation of model performance

    International Nuclear Information System (INIS)

    Attwood, C.; Fayers, C.; Mayall, A.; Brown, J.; Simmonds, J.R.

    1996-01-01

    The FARMLAND model was originally developed for use in connection with continuous, routine releases of radionuclides, but because it has many time-dependent features it has been developed further for a single accidental release. The most recent version of FARMLAND is flexible and can be used to predict activity concentrations in food as a function of time after both accidental and routine releases of radionuclides. The effect of deposition at different times of the year can be taken into account. FARMLAND contains a suite of models which simulate radionuclide transfer through different parts of the foodchain. The models can be used in different combinations and offer the flexibility to assess a variety of radiological situations. The main foods considered are green vegetables, grain products, root vegetables, milk, meat and offal from cattle, and meat and offal from sheep. A large variety of elements can be considered although the degree of complexity with which some are modelled is greater than others; isotopes of caesium, strontium and iodine are treated in greatest detail. 22 refs, 12 figs, 10 tabs

  15. DETRA: Model description and evaluation of model performance

    International Nuclear Information System (INIS)

    Suolanen, V.

    1996-01-01

    The computer code DETRA is a generic tool for environmental transfer analyses of radioactive or stable substances. The code has been applied for various purposes, mainly problems related to the biospheric transfer of radionuclides both in safety analyses of disposal of nuclear wastes and in consideration of foodchain exposure pathways in the analyses of off-site consequences of reactor accidents. For each specific application an individually tailored conceptual model can be developed. The biospheric transfer analyses performed by the code are typically carried out for terrestrial, aquatic and food chain applications. 21 refs, 35 figs, 15 tabs

  16. A description of rotations for DEM models of particle systems

    Science.gov (United States)

    Campello, Eduardo M. B.

    2015-06-01

    In this work, we show how a vector parameterization of rotations can be adopted to describe the rotational motion of particles within the framework of the discrete element method (DEM). It is based on the use of a special rotation vector, called Rodrigues rotation vector, and accounts for finite rotations in a fully exact manner. The use of fictitious entities such as quaternions or complicated structures such as Euler angles is thereby circumvented. As an additional advantage, stick-slip friction models with inter-particle rolling motion are made possible in a consistent and elegant way. A few examples are provided to illustrate the applicability of the scheme. We believe that simple vector descriptions of rotations are very useful for DEM models of particle systems.

  17. Global warming description using Daisyworld model with greenhouse gases.

    Science.gov (United States)

    Paiva, Susana L D; Savi, Marcelo A; Viola, Flavio M; Leiroz, Albino J K

    2014-11-01

    Daisyworld is an archetypal model of the earth that is able to describe the global regulation that can emerge from the interaction between life and environment. This article proposes a model based on the original Daisyworld considering greenhouse gases emission and absorption, allowing the description of the global warming phenomenon. Global and local analyses are discussed evaluating the influence of greenhouse gases in the planet dynamics. Numerical simulations are carried out showing the general qualitative behavior of the Daisyworld for different scenarios that includes solar luminosity variations and greenhouse gases effect. Nonlinear dynamics perspective is of concern discussing a way that helps the comprehension of the global warming phenomenon. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  18. Bedrock hydrogeology Forsmark. Site descriptive modelling, SDM-Site Forsmark

    International Nuclear Information System (INIS)

    Follin, Sven

    2008-12-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) has conducted site investigations at two different locations, the Forsmark and Laxemar-Simpevarp areas, with the objective of siting a final repository for spent nuclear fuel according to the KBS-3 concept. Site characterisation should provide all data required for an integrated evaluation of the suitability of the investigated site and an important component in the characterisation work is the development of a hydrogeological model. The hydrogeological model is used by repository engineering to design the underground facility and to develop a repository layout adapted to the site. It also provides input to the safety assessment. Another important use of the hydrogeological model is in the environmental impact assessment. This report presents the understanding of the hydrogeological conditions of the bedrock at Forsmark reached following the completion of the surface-based investigations and provides a summary of the bedrock hydrogeological model and the underlying data supporting its development. It constitutes the main reference on bedrock hydrogeology for the site descriptive model concluding the surface-based investigations at Forsmark, SDM-site, and is intended to describe the hydraulic properties and hydrogeological conditions of the bedrock at the site and to give the information essential for demonstrating understanding

  19. A descriptive ecosystem model - a strategy for model development during site investigations

    International Nuclear Information System (INIS)

    Loefgren, Anders

    2003-09-01

    This report describes a strategy for the development of a site descriptive model for the surface ecosystem on the potential deep repository sites. The surface ecosystem embraces many disciplines, and these have to be identified, described and integrated in order to construct a descriptive ecosystem model that describes and quantifies biotic and abiotic patterns and processes of importance for the ecosystem on the site. The descriptive model includes both present day conditions and historical information. The descriptive ecosystem model will be used to supply input data for the safety assessment and to serve as the baseline model for devising a monitoring program to detect short-term disturbances caused first by the site investigations and later by the construction of the deep repository. Furthermore, it will serve as a reference for future comparisons to determine more long-term effects or changes caused by the deep repository. The report adopts a non-site-specific approach focusing on the following aims: 1. To present and define the properties that will constitute the descriptive ecosystem model. 2. To present a methodology for determining those properties. 3. To describe and develop the framework for the descriptive ecosystem model by integrating the different properties. 4. To present vital data from other site descriptive models such as those for geology or hydrogeology that interacts with and affects the descriptive ecosystem model. The properties are described under four different sections: general physical properties of the landscape, the terrestrial system, the limnic system and the marine system. These headings are further subdivided into entities that integrate properties in relation to processes

  20. A descriptive ecosystem model - a strategy for model development during site investigations

    Energy Technology Data Exchange (ETDEWEB)

    Loefgren, Anders [Stockholm Univ. (Sweden). Dept. of Botany; Lindborg, Tobias [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)

    2003-09-01

    This report describes a strategy for the development of a site descriptive model for the surface ecosystem on the potential deep repository sites. The surface ecosystem embraces many disciplines, and these have to be identified, described and integrated in order to construct a descriptive ecosystem model that describes and quantifies biotic and abiotic patterns and processes of importance for the ecosystem on the site. The descriptive model includes both present day conditions and historical information. The descriptive ecosystem model will be used to supply input data for the safety assessment and to serve as the baseline model for devising a monitoring program to detect short-term disturbances caused first by the site investigations and later by the construction of the deep repository. Furthermore, it will serve as a reference for future comparisons to determine more long-term effects or changes caused by the deep repository. The report adopts a non-site-specific approach focusing on the following aims: 1. To present and define the properties that will constitute the descriptive ecosystem model. 2. To present a methodology for determining those properties. 3. To describe and develop the framework for the descriptive ecosystem model by integrating the different properties. 4. To present vital data from other site descriptive models such as those for geology or hydrogeology that interacts with and affects the descriptive ecosystem model. The properties are described under four different sections: general physical properties of the landscape, the terrestrial system, the limnic system and the marine system. These headings are further subdivided into entities that integrate properties in relation to processes.

  1. A Note on Two-Equation Closure Modelling of Canopy Flow

    DEFF Research Database (Denmark)

    Sogachev, Andrey

    2009-01-01

    The note presents a rational approach to modelling the source/sink due to vegetation or buoyancy effects that appear in the turbulent kinetic energy, E, equation and a supplementary equation for a length-scale determining variable, φ, when two-equation closure is applied to canopy and atmospheric...

  2. A Note on the Identifiability of Fixed-Effect 3PL Models.

    Science.gov (United States)

    Wu, Hao

    2016-12-01

    In this note, we prove that the 3 parameter logistic model with fixed-effect abilities is identified only up to a linear transformation of the ability scale under mild regularity conditions, contrary to the claims in Theorem 2 of San Martín et al. (Psychometrika, 80(2):450-467, 2015a).

  3. Geology Forsmark. Site descriptive modelling Forsmark - stage 2.2

    Energy Technology Data Exchange (ETDEWEB)

    Stephens, Michael B. [Geological Survey of Sweden, Uppsala (Sweden); Fox, Aaron; La Pointe, Paul [Golder Associates Inc (United States); Simeonov, Assen [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Isaksson, Hans [GeoVista AB, Luleaa (Sweden); Hermanson, Jan; Oehman, Johan [Golder Associates AB, Stockholm (Sweden)

    2007-10-15

    The geological work during stage 2.2 has involved the development of deterministic models for rock domains (RFM) and deformation zones (ZFM), the identification and deterministic modelling of fracture domains (FFM) inside the candidate volume, i.e. the parts of rock domains that are not affected by deformation zones, and the development of statistical models for fractures and minor deformation zones (geological discrete fracture network modelling or geological DFN modelling). The geological DFN model addresses brittle structures at a scale of less than 1 km, which is the lower cut-off in the deterministic modelling of deformation zones. In order to take account of variability in data resolution, deterministic models for rock domains and deformation zones are presented in both regional and local model volumes, while the geological DFN model is valid within specific fracture domains inside the north-western part of the candidate volume, including the target volume. The geological modelling work has evaluated and made use of: A revised bedrock geological map at the ground surface. Geological and geophysical data from 21 cored boreholes and 33 percussion boreholes. Detailed mapping of fractures and rock units along nine excavations or large surface outcrops. Data bearing on the characterisation (including kinematics) of deformation zones. Complementary geochronological and other rock and fracture analytical data. Lineaments identified on the basis of airborne and high-resolution ground magnetic data. A reprocessing of both surface and borehole reflection seismic data. Seismic refraction data. The outputs of the deterministic modelling work are geometric models in RVS format and detailed property tables for rock domains and deformation zones, and a description of fracture domains. The outputs of the geological DFN modelling process are recommended parameters or statistical distributions that describe fracture set orientations, radius sizes, volumetric intensities

  4. Geology Forsmark. Site descriptive modelling Forsmark - stage 2.2

    International Nuclear Information System (INIS)

    Stephens, Michael B.; Fox, Aaron; La Pointe, Paul; Simeonov, Assen; Isaksson, Hans; Hermanson, Jan; Oehman, Johan

    2007-10-01

    The geological work during stage 2.2 has involved the development of deterministic models for rock domains (RFM) and deformation zones (ZFM), the identification and deterministic modelling of fracture domains (FFM) inside the candidate volume, i.e. the parts of rock domains that are not affected by deformation zones, and the development of statistical models for fractures and minor deformation zones (geological discrete fracture network modelling or geological DFN modelling). The geological DFN model addresses brittle structures at a scale of less than 1 km, which is the lower cut-off in the deterministic modelling of deformation zones. In order to take account of variability in data resolution, deterministic models for rock domains and deformation zones are presented in both regional and local model volumes, while the geological DFN model is valid within specific fracture domains inside the north-western part of the candidate volume, including the target volume. The geological modelling work has evaluated and made use of: A revised bedrock geological map at the ground surface. Geological and geophysical data from 21 cored boreholes and 33 percussion boreholes. Detailed mapping of fractures and rock units along nine excavations or large surface outcrops. Data bearing on the characterisation (including kinematics) of deformation zones. Complementary geochronological and other rock and fracture analytical data. Lineaments identified on the basis of airborne and high-resolution ground magnetic data. A reprocessing of both surface and borehole reflection seismic data. Seismic refraction data. The outputs of the deterministic modelling work are geometric models in RVS format and detailed property tables for rock domains and deformation zones, and a description of fracture domains. The outputs of the geological DFN modelling process are recommended parameters or statistical distributions that describe fracture set orientations, radius sizes, volumetric intensities

  5. Modeling a description logic vocabulary for cancer research.

    Science.gov (United States)

    Hartel, Frank W; de Coronado, Sherri; Dionne, Robert; Fragoso, Gilberto; Golbeck, Jennifer

    2005-04-01

    The National Cancer Institute has developed the NCI Thesaurus, a biomedical vocabulary for cancer research, covering terminology across a wide range of cancer research domains. A major design goal of the NCI Thesaurus is to facilitate translational research. We describe: the features of Ontylog, a description logic used to build NCI Thesaurus; our methodology for enhancing the terminology through collaboration between ontologists and domain experts, and for addressing certain real world challenges arising in modeling the Thesaurus; and finally, we describe the conversion of NCI Thesaurus from Ontylog into Web Ontology Language Lite. Ontylog has proven well suited for constructing big biomedical vocabularies. We have capitalized on the Ontylog constructs Kind and Role in the collaboration process described in this paper to facilitate communication between ontologists and domain experts. The artifacts and processes developed by NCI for collaboration may be useful in other biomedical terminology development efforts.

  6. Bedrock hydrogeochemistry Forsmark. Site descriptive modelling SDM-Site Forsmark

    International Nuclear Information System (INIS)

    Laaksoharju, Marcus; Smellie, John; Tullborg, Eva-Lena; Gimeno, Maria; Hallbeck, Lotta; Molinero, Jorge; Waber, Nick

    2008-12-01

    The overall objectives of the hydrogeochemical site description for Forsmark are to establish a detailed understanding of the hydrogeochemical conditions at the site, and to use this understanding to develop models that address the needs identified by the safety assessment groups during the site investigation phase. Issues of concern to safety assessment are radionuclide transport and technical barrier behaviour, both of which are dependent on the chemistry of groundwater and porewater and their evolution with time. The specific aims of the hydrogeochemical work were: To document the hydrogeochemistry at the Forsmark site with focus on the development of conceptual models to describe and visualise the site. To provide relevant parameter values to be used for safety assessment calculations. To provide the hydrogeochemical basis for the modelling work by other teams, in particular hydrogeology. To take account of the feedback from the SR-Can safety assessment work that bears relevance to the hydrogeochemical modelling work. The work has involved the development of descriptive and mathematical models for groundwaters in relation to rock domains, fracture domains and deformation zones. In this report, the groundwaters have been interpreted in relation to their origin, evolution and composition, which require close integration with geological, climatological and hydrogeological information. Past climate changes are one of the major driving forces for long-term hydrogeochemical changes (hundreds to thousands of years) and are, therefore, of fundamental importance for understanding the palaeohydrogeological, palaeohydrogeochemical and present evolution of groundwater in the Fennoscandian crystalline bedrock. In contrast, redox buffer capacity of the bedrock will minimise the effects on changes in alkalinity and redox at repository depths, therefore limiting the variations in pH and Eh significantly, regardless of major changes in groundwater composition. There is

  7. Bedrock hydrogeochemistry Forsmark. Site descriptive modelling SDM-Site Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Laaksoharju, Marcus (Geopoint AB, Sollentuna (Sweden)); Smellie, John (Conterra AB, Partille (Sweden)); Tullborg, Eva-Lena (Terralogica, Graabo (Sweden)); Gimeno, Maria (Univ. of Zaragoza, Zaragoza (Spain)); Hallbeck, Lotta (Microbial Analytics, Goeteborg (Sweden)); Molinero, Jorge (Amphos XXI Consulting S.L., Barcelona (Spain)); Waber, Nick (Univ. of Bern, Bern (Switzerland))

    2008-12-15

    The overall objectives of the hydrogeochemical site description for Forsmark are to establish a detailed understanding of the hydrogeochemical conditions at the site, and to use this understanding to develop models that address the needs identified by the safety assessment groups during the site investigation phase. Issues of concern to safety assessment are radionuclide transport and technical barrier behaviour, both of which are dependent on the chemistry of groundwater and porewater and their evolution with time. The specific aims of the hydrogeochemical work were: To document the hydrogeochemistry at the Forsmark site with focus on the development of conceptual models to describe and visualise the site. To provide relevant parameter values to be used for safety assessment calculations. To provide the hydrogeochemical basis for the modelling work by other teams, in particular hydrogeology. To take account of the feedback from the SR-Can safety assessment work that bears relevance to the hydrogeochemical modelling work. The work has involved the development of descriptive and mathematical models for groundwaters in relation to rock domains, fracture domains and deformation zones. In this report, the groundwaters have been interpreted in relation to their origin, evolution and composition, which require close integration with geological, climatological and hydrogeological information. Past climate changes are one of the major driving forces for long-term hydrogeochemical changes (hundreds to thousands of years) and are, therefore, of fundamental importance for understanding the palaeohydrogeological, palaeohydrogeochemical and present evolution of groundwater in the Fennoscandian crystalline bedrock. In contrast, redox buffer capacity of the bedrock will minimise the effects on changes in alkalinity and redox at repository depths, therefore limiting the variations in pH and Eh significantly, regardless of major changes in groundwater composition. There is

  8. General Description of Fission Observables: GEF Model Code

    Science.gov (United States)

    Schmidt, K.-H.; Jurado, B.; Amouroux, C.; Schmitt, C.

    2016-01-01

    The GEF ("GEneral description of Fission observables") model code is documented. It describes the observables for spontaneous fission, neutron-induced fission and, more generally, for fission of a compound nucleus from any other entrance channel, with given excitation energy and angular momentum. The GEF model is applicable for a wide range of isotopes from Z = 80 to Z = 112 and beyond, up to excitation energies of about 100 MeV. The results of the GEF model are compared with fission barriers, fission probabilities, fission-fragment mass- and nuclide distributions, isomeric ratios, total kinetic energies, and prompt-neutron and prompt-gamma yields and energy spectra from neutron-induced and spontaneous fission. Derived properties of delayed neutrons and decay heat are also considered. The GEF model is based on a general approach to nuclear fission that explains a great part of the complex appearance of fission observables on the basis of fundamental laws of physics and general properties of microscopic systems and mathematical objects. The topographic theorem is used to estimate the fission-barrier heights from theoretical macroscopic saddle-point and ground-state masses and experimental ground-state masses. Motivated by the theoretically predicted early localisation of nucleonic wave functions in a necked-in shape, the properties of the relevant fragment shells are extracted. These are used to determine the depths and the widths of the fission valleys corresponding to the different fission channels and to describe the fission-fragment distributions and deformations at scission by a statistical approach. A modified composite nuclear-level-density formula is proposed. It respects some features in the superfluid regime that are in accordance with new experimental findings and with theoretical expectations. These are a constant-temperature behaviour that is consistent with a considerably increased heat capacity and an increased pairing condensation energy that is

  9. Description of group-theoretical model of developed turbulence

    International Nuclear Information System (INIS)

    Saveliev, V L; Gorokhovski, M A

    2008-01-01

    We propose to associate the phenomenon of stationary turbulence with the special self-similar solutions of the Euler equations. These solutions represent the linear superposition of eigenfields of spatial symmetry subgroup generators and imply their dependence on time through the parameter of the symmetry transformation only. From this model, it follows that for developed turbulent process, changing the scale of averaging (filtering) of the velocity field is equivalent to composition of scaling, translation and rotation transformations. We call this property a renormalization-group invariance of filtered turbulent fields. The renormalization group invariance provides an opportunity to transform the averaged Navier-Stokes equation over a small scale (inner threshold of the turbulence) to larger scales by simple scaling. From the methodological point of view, it is significant to note that the turbulent viscosity term appeared not as a result of averaging of the nonlinear term in the Navier-Stokes equation, but from the molecular viscosity term with the help of renormalization group transformation.

  10. Description of group-theoretical model of developed turbulence

    Energy Technology Data Exchange (ETDEWEB)

    Saveliev, V L [Institute of Ionosphere, Almaty 050020 (Kazakhstan); Gorokhovski, M A [Laboratoire de Mecanique des Fluides et Acoustique, Ecole Centrale de Lyon, 36, Avenue Guy de Collongues, F69134 Ecully-Cedex (France)], E-mail: saveliev@topmail.kz, E-mail: mikhael.gorokhovski@ec-lyon.fr

    2008-12-15

    We propose to associate the phenomenon of stationary turbulence with the special self-similar solutions of the Euler equations. These solutions represent the linear superposition of eigenfields of spatial symmetry subgroup generators and imply their dependence on time through the parameter of the symmetry transformation only. From this model, it follows that for developed turbulent process, changing the scale of averaging (filtering) of the velocity field is equivalent to composition of scaling, translation and rotation transformations. We call this property a renormalization-group invariance of filtered turbulent fields. The renormalization group invariance provides an opportunity to transform the averaged Navier-Stokes equation over a small scale (inner threshold of the turbulence) to larger scales by simple scaling. From the methodological point of view, it is significant to note that the turbulent viscosity term appeared not as a result of averaging of the nonlinear term in the Navier-Stokes equation, but from the molecular viscosity term with the help of renormalization group transformation.

  11. Surface system Forsmark. Site descriptive modelling SDM-Site Forsmark

    International Nuclear Information System (INIS)

    Lindborg, Tobias

    2008-12-01

    SKB has undertaken site characterization of two different areas, Forsmark and Laxemar-Simpevarp, in order to find a suitable location for a geological repository for spent nuclear fuel. This report focuses on the site descriptive modelling of the surface system at Forsmark. The characterization of the surface system at the site was primarily made by identifying and describing important properties in different parts of the surface system, properties concerning e.g. hydrology and climate, Quaternary deposits and soils, hydrochemistry, vegetation, ecosystem functions, but also current and historical land use. The report presents available input data, methodology for data evaluation and modelling, and resulting models for each of the different disciplines. Results from the modelling of the surface system are also integrated with results from modelling of the deep bedrock system. The Forsmark site is located within the municipality of Oesthammar, about 120 km north of Stockholm. The investigated area is located along the shoreline of Oeregrundsgrepen, a funnel-shaped bay of the Baltic Sea. The area is characterized by small-scale topographic variations and is almost entirely located at altitudes lower than 20 metres above sea level. The Quaternary deposits in the area are dominated by till, characterized by a rich content of calcite which was transported by the glacier ice to the area from the sedimentary bedrock of Gaevlebukten about 100 km north of Forsmark. As a result, the surface waters and shallow groundwater at Forsmark are characterized by high pH values and high concentrations of certain major constituents, especially calcium and bicarbonate. The annual precipitation and runoff are 560 and 150 mm, respectively. The lakes are small and shallow, with mean and maximum depths ranging from approximately 0.1 to 1 m and 0.4 to 2 m. Sea water flows into the most low-lying lakes during events giving rise to very high sea levels. Wetlands are frequent and cover 25 to 35

  12. Site investigations: Strategy for rock mechanics site descriptive model

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Johan [JA Streamflow AB, Aelvsjoe (Sweden); Christiansson, Rolf [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Hudson, John [Rock Engineering Consultants, Welwyn Garden City (United Kingdom)

    2002-05-01

    As a part of the planning work for the Site Investigations, SKB has developed a Rock Mechanics Site Descriptive Modelling Strategy. Similar strategies are being developed for other disciplines. The objective of the strategy is that it should guide the practical implementation of evaluating site specific data during the Site Investigations. It is also understood that further development may be needed. This methodology enables the crystalline rock mass to be characterised in terms of the quality at different sites, for considering rock engineering constructability, and for providing the input to numerical models and performance assessment calculations. The model describes the initial stresses and the distribution of deformation and strength properties of the intact rock, of fractures and fracture zones, and of the rock mass. The rock mass mechanical properties are estimated by empirical relations and by numerical simulations. The methodology is based on estimation of mechanical properties using both empirical and heroretical/numerical approaches; and estimation of in situ rock stress using judgement and numerical modelling, including the influence of fracture zones. These approaches are initially used separately, and then combined to produce the required characterisation estimates. The methodology was evaluated with a Test Case at the Aespoe Hard Rock Laboratory in Sweden. The quality control aspects are an important feature of the methodology: these include Protocols to ensure the structure and coherence of the procedures used, regular meetings to enhance communication, feedback from internal and external reviewing, plus the recording of an audit trail of the development steps and decisions made. The strategy will be reviewed and, if required, updated as appropriate.

  13. Site investigations: Strategy for rock mechanics site descriptive model

    International Nuclear Information System (INIS)

    Andersson, Johan; Christiansson, Rolf; Hudson, John

    2002-05-01

    As a part of the planning work for the Site Investigations, SKB has developed a Rock Mechanics Site Descriptive Modelling Strategy. Similar strategies are being developed for other disciplines. The objective of the strategy is that it should guide the practical implementation of evaluating site specific data during the Site Investigations. It is also understood that further development may be needed. This methodology enables the crystalline rock mass to be characterised in terms of the quality at different sites, for considering rock engineering constructability, and for providing the input to numerical models and performance assessment calculations. The model describes the initial stresses and the distribution of deformation and strength properties of the intact rock, of fractures and fracture zones, and of the rock mass. The rock mass mechanical properties are estimated by empirical relations and by numerical simulations. The methodology is based on estimation of mechanical properties using both empirical and heroretical/numerical approaches; and estimation of in situ rock stress using judgement and numerical modelling, including the influence of fracture zones. These approaches are initially used separately, and then combined to produce the required characterisation estimates. The methodology was evaluated with a Test Case at the Aespoe Hard Rock Laboratory in Sweden. The quality control aspects are an important feature of the methodology: these include Protocols to ensure the structure and coherence of the procedures used, regular meetings to enhance communication, feedback from internal and external reviewing, plus the recording of an audit trail of the development steps and decisions made. The strategy will be reviewed and, if required, updated as appropriate

  14. CSOIL 2000 an exposure model for human risk assessment of soil contamination. A model description

    NARCIS (Netherlands)

    Brand E; Otte PF; Lijzen JPA; LER

    2007-01-01

    This RIVM description of the CSOIL 2000 model deals, for the first time, with all aspects of the model. CSOIL 2000 can be used to derive intervention values. Intervention values are calculated for contaminated soil and represent a measure for determining when contaminated soil needs to be

  15. Descriptive models for single-jet sluicing of sludge waste

    International Nuclear Information System (INIS)

    Erian, F.F.; Mahoney, L.A.; Terrones, G.

    1997-12-01

    Mobilization of sludge waste stored in underground storage tanks can be achieved safely and reliably by sluicing. In the project discussed in this report, the waste in Hanford single-shell Tank 241-C-106 will be mobilized by sluicing, retrieved by a slurry retrieval pump, and transferred via an 1800-ft slurry pipeline to Tank 241-AY-102. A sluicing strategy must be developed that ensures efficient use of the deployed configuration of the sluicing system: the nozzle(s) and the retrieval pump(s). Given a sluicing system configuration in a particular tank, it is desirable to prescribe the sequential locations at which the sludge will be mobilized and retrieved and the rate at which these mobilization and retrieval processes take place. In addition, it is necessary to know whether the retrieved waste slurry meets the requirements for cross-site slurry transport. Some of the physical phenomena that take place during mobilization and retrieval and certain aspects of the sluicing process are described in this report. First, a mathematical model gives (1) an idealized geometrical representation of where, within the confines of a storage tank containing a certain amount of settled waste, sludge can be removed and mobilized; and (2) a quantitative measure of the amount of sludge that can be removed during a sluicing campaign. A model describing an idealized water jet issuing from a circular nozzle located at a given height above a flat surface is also presented in this report. This dynamic water-jet model provides the basis for improving the geometrical sluicing model presented next. In this model the authors assume that the water jet follows a straight trajectory toward a target point on a flat surface. However, the water jet does not follow a straight line in the actual tank, and using the true trajectory will allow a more accurate estimate of the amount of disturbed material. Also, the authors hope that developing accurate force and pressure fields will lead to a better

  16. Descriptions and models of safety functions - a prestudy

    International Nuclear Information System (INIS)

    Harms-Ringdahl, L.

    1999-09-01

    A study has been made with the focus on different theories and applications concerning 'safety functions' and 'barriers'. In this report, a safety function is defined as a technical or organisational function with the aim to reduce probability and/or consequences associated with a hazard. The study contains a limited review of practice and theories related to safety, with a focus on applications from nuclear and industrial safety. The study is based on a literature review and interviews. A summary has been made of definitions and terminology, which shows a large variation. E.g. 'barrier' can have a precise physical and technical meaning, or it can include human, technical and organisational elements. Only a few theoretical models describing safety functions have been found. One section of the report summarises problems related to safety issues and procedures. They concern errors in procedure design and user compliance. A proposal for describing and structuring safety functions has been made. Dimensions in a description could be degree of abstraction, systems level, the different parts of the function, etc. A model for safety functions has been proposed, which includes the division of a safety function in a number connected 'safety function elements'. One conclusion is that there is a potential for improving theories and tools for safety work and procedures. Safety function could be a useful concept in such a development, and advantages and disadvantages with this is discussed. If further work should be done, it is recommended that this is made as a combination of theoretical analysis and case studies

  17. Description and Rationale for the Planning, Monitoring, and Implementation (PMI) Model: Description.

    Science.gov (United States)

    Ford, Valeria A.

    The design of the Planning, Monitoring, and Implementation Model (PMI) and the aspects of the model that make it useful in public schools are the topics of this paper. After the objectives of a program or operation have been identified, the model specifies three additional pieces of information that are needed for an evaluation: inputs, processes,…

  18. Using voice to create hospital progress notes: Description of a mobile application and supporting system integrated with a commercial electronic health record.

    Science.gov (United States)

    Payne, Thomas H; Alonso, W David; Markiel, J Andrew; Lybarger, Kevin; White, Andrew A

    2018-01-01

    We describe the development and design of a smartphone app-based system to create inpatient progress notes using voice, commercial automatic speech recognition software, with text processing to recognize spoken voice commands and format the note, and integration with a commercial EHR. This new system fits hospital rounding workflow and was used to support a randomized clinical trial testing whether use of voice to create notes improves timeliness of note availability, note quality, and physician satisfaction with the note creation process. The system was used to create 709 notes which were placed in the corresponding patient's EHR record. The median time from pressing the Send button to appearance of the formatted note in the Inbox was 8.8 min. It was generally very reliable, accepted by physician users, and secure. This approach provides an alternative to use of keyboard and templates to create progress notes and may appeal to physicians who prefer voice to typing. Copyright © 2017 Elsevier Inc. All rights reserved.

  19. Surface system Forsmark. Site descriptive modelling SDM-Site Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Lindborg, Tobias (ed.)

    2008-12-15

    SKB has undertaken site characterization of two different areas, Forsmark and Laxemar-Simpevarp, in order to find a suitable location for a geological repository for spent nuclear fuel. This report focuses on the site descriptive modelling of the surface system at Forsmark. The characterization of the surface system at the site was primarily made by identifying and describing important properties in different parts of the surface system, properties concerning e.g. hydrology and climate, Quaternary deposits and soils, hydrochemistry, vegetation, ecosystem functions, but also current and historical land use. The report presents available input data, methodology for data evaluation and modelling, and resulting models for each of the different disciplines. Results from the modelling of the surface system are also integrated with results from modelling of the deep bedrock system. The Forsmark site is located within the municipality of Oesthammar, about 120 km north of Stockholm. The investigated area is located along the shoreline of Oeregrundsgrepen, a funnel-shaped bay of the Baltic Sea. The area is characterized by small-scale topographic variations and is almost entirely located at altitudes lower than 20 metres above sea level. The Quaternary deposits in the area are dominated by till, characterized by a rich content of calcite which was transported by the glacier ice to the area from the sedimentary bedrock of Gaevlebukten about 100 km north of Forsmark. As a result, the surface waters and shallow groundwater at Forsmark are characterized by high pH values and high concentrations of certain major constituents, especially calcium and bicarbonate. The annual precipitation and runoff are 560 and 150 mm, respectively. The lakes are small and shallow, with mean and maximum depths ranging from approximately 0.1 to 1 m and 0.4 to 2 m. Sea water flows into the most low-lying lakes during events giving rise to very high sea levels. Wetlands are frequent and cover 25 to 35

  20. A note on tilted Bianchi type VIh models: the type III bifurcation

    Science.gov (United States)

    Coley, A. A.; Hervik, S.

    2008-10-01

    In this note we complete the analysis of Hervik, van den Hoogen, Lim and Coley (2007 Class. Quantum Grav. 24 3859) of the late-time behaviour of tilted perfect fluid Bianchi type III models. We consider models with dust, and perfect fluids stiffer than dust, and eludicate the late-time behaviour by studying the centre manifold which dominates the behaviour of the model at late times. In the dust case, this centre manifold is three-dimensional and can be considered a double bifurcation as the two parameters (h and γ) of the type VIh model are varied. We therefore complete the analysis of the late-time behaviour of tilted ever-expanding Bianchi models of types I VIII.

  1. Perceiving the initial note: quantitative models of how listeners parse cyclical auditory patterns.

    Science.gov (United States)

    Yu, Minhong; Getz, Laura; Kubovy, Michael

    2015-11-01

    In this paper, we explore the rules followed by the auditory system in grouping temporal patterns. Imagine the following cyclical pattern (which we call an "auditory necklace"-AN for short-because those patterns are best visualized as beads arranged on a circle) consisting of notes (1s) and rests (0s): … 1110011011100110 …. It is perceived either as repeating 11100110 or as repeating 11011100. We devised a method to explore the temporal segmentation of ANs. In two experiments, while an AN was played, a circular array of icons appeared on the screen. At the time of each event (i.e., note or rest), one icon was highlighted; the highlight moved cyclically around the circular array. The participants were asked to click on the icon that corresponded to the note they perceived as the starting point, or clasp, of the AN. The best account of the segmentation of our ANs is based on Garner's (1974) run and gap principles. An important feature of our probabilistic model is the way in which it combines the effects of run length and gap length: additively. This result is an auditory analogue of Kubovy and van den Berg's (2008) discovery of the additivity of the effects of two visual grouping principles (proximity and similarity) conjointly applied to the same stimulus.

  2. Binary classifiers and latent sequence models for emotion detection in suicide notes.

    Science.gov (United States)

    Cherry, Colin; Mohammad, Saif M; de Bruijn, Berry

    2012-01-01

    This paper describes the National Research Council of Canada's submission to the 2011 i2b2 NLP challenge on the detection of emotions in suicide notes. In this task, each sentence of a suicide note is annotated with zero or more emotions, making it a multi-label sentence classification task. We employ two distinct large-margin models capable of handling multiple labels. The first uses one classifier per emotion, and is built to simplify label balance issues and to allow extremely fast development. This approach is very effective, scoring an F-measure of 55.22 and placing fourth in the competition, making it the best system that does not use web-derived statistics or re-annotated training data. Second, we present a latent sequence model, which learns to segment the sentence into a number of emotion regions. This model is intended to gracefully handle sentences that convey multiple thoughts and emotions. Preliminary work with the latent sequence model shows promise, resulting in comparable performance using fewer features.

  3. A Note on the (In)stability of Diamond's Growth Model

    DEFF Research Database (Denmark)

    Blomgren-Hansen, Niels

    2005-01-01

    another solution - the rate of interest equals the rate of growth - and that this solution is stable in a capital-based economy (contrary to the pure consumption loan model of interest suggested by Samuelson(1958)). The model has interesting implications. Diamond's model predict that an increase in rate......Diamond's two-period OLG growth model is based on the assumption that the stock of capital in any period is equal to the wealth accumulated in the previous period by the generation of pensioners. This stock equlibrium condition may appear an innocuous paraphrase of the ordinary macro-economic flow...... equilibrium condition, S = I.This is not the case. In this note I demonstrate that Diamond's solution is unstable in a monetary market economy where households and firms make independent decisions as to how much to save and how much to invest. An increase in the rate of interest above the Diamond long...

  4. Three models of child abuse consultations: A qualitative study of inpatient child abuse consultation notes.

    Science.gov (United States)

    Keenan, Heather T; Campbell, Kristine A

    2015-05-01

    Child abuse pediatricians have multiple roles in caring for abused children, including prevention, diagnosis, treatment, and, when needed, expert legal opinion. The child physical abuse consultation differs from the traditional medical consultation in that it has medical, investigative and legal audiences, all of whom have different information needs. How child abuse pediatricians approach their cases and how they document their initial inpatient consultations that will be used by such a diverse audience is currently unexplored. We used content analysis to examine 37 child physical abuse consultation notes from a national sample of child abuse pediatricians in order to understand physicians' approaches to these consultations. Three commonly used models of child physical abuse consultation were identified in the data that we named the base model, the investigative model, and the family-dynamic model. While model types overlap, each is distinguished by key features including the approach used to gather information, the information recorded, and the language used in documentation. The base model most closely mirrors the traditional medical approach; the investigative model concentrates on triangulation of sources of information; and, the family-dynamic model concentrates on physician perceptions of family relationships. The three models of consultations for child physical abuse mirror the areas of child abuse pediatrics: diagnostic, forensic and therapeutic. These models are considered in relationship to best practice from other medical specialties with forensic components. Copyright © 2014 Elsevier Ltd. All rights reserved.

  5. Description of regolith at Laxemar-Simpevarp. Site descriptive modelling SDM-Site Laxemar

    International Nuclear Information System (INIS)

    Sohlenius, Gustav; Hedenstroem, Anna

    2008-11-01

    This report compiles all known available information regarding the regolith in the Laxemar-Simpevarp regional model area. Regolith refers to the loose deposits overlying the bedrock. In the Laxemar-Simpevarp area, all known regolith was deposited during the Quaternary period and is consequently often referred to as Quaternary deposits (QD). In the terrestrial areas the uppermost part of the regolith, which has been affected by climate and vegetation, is referred to as soil. The geographical and stratigraphical distributions of the regolith have been used to construct a model showing the distribution of regolith depths in the whole model area. The stratigraphical units shown in the regolith depth and stratigraphy model have been characterised with respect to physical and chemical properties. Most of the data used for that characterisation have been obtained from the site investigation but some data were taken from the literature. All QD in the Laxemar area have most probably been deposited during or after the latest deglaciation. The ice sheet in the area moved from the north-west during the latest ice age. The Baltic Sea completely covered the investigated area after the latest deglaciation c 12,000 BC. Land uplift was fastest during the first few thousand years following the deglaciation and has subsequently decreased to the present value of 1 mm/year. Older QD have been eroded in areas exposed to waves and currents and the material has later been redeposited. Fine-grained sediments have been deposited on the floor of bays and in other sheltered positions. Peat has accumulated in many of the wetlands situated in topographically low positions. The groundwater table in many of the former wetlands has been artificially lowered to obtain land for forestry and agriculture, which has caused the peat to partly or completely oxidise. As land uplift proceeds, some new areas are being subjected to erosion at the same time as other new areas are becoming lakes and sheltered

  6. Description of regolith at Laxemar-Simpevarp. Site descriptive modelling SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    Sohlenius, Gustav; Hedenstroem, Anna (Geological Survey of Sweden (SGU), Uppsala (Sweden))

    2008-11-15

    This report compiles all known available information regarding the regolith in the Laxemar-Simpevarp regional model area. Regolith refers to the loose deposits overlying the bedrock. In the Laxemar-Simpevarp area, all known regolith was deposited during the Quaternary period and is consequently often referred to as Quaternary deposits (QD). In the terrestrial areas the uppermost part of the regolith, which has been affected by climate and vegetation, is referred to as soil. The geographical and stratigraphical distributions of the regolith have been used to construct a model showing the distribution of regolith depths in the whole model area. The stratigraphical units shown in the regolith depth and stratigraphy model have been characterised with respect to physical and chemical properties. Most of the data used for that characterisation have been obtained from the site investigation but some data were taken from the literature. All QD in the Laxemar area have most probably been deposited during or after the latest deglaciation. The ice sheet in the area moved from the north-west during the latest ice age. The Baltic Sea completely covered the investigated area after the latest deglaciation c 12,000 BC. Land uplift was fastest during the first few thousand years following the deglaciation and has subsequently decreased to the present value of 1 mm/year. Older QD have been eroded in areas exposed to waves and currents and the material has later been redeposited. Fine-grained sediments have been deposited on the floor of bays and in other sheltered positions. Peat has accumulated in many of the wetlands situated in topographically low positions. The groundwater table in many of the former wetlands has been artificially lowered to obtain land for forestry and agriculture, which has caused the peat to partly or completely oxidise. As land uplift proceeds, some new areas are being subjected to erosion at the same time as other new areas are becoming lakes and sheltered

  7. INTRA/Mod3.2. Manual and Code Description. Volume I - Physical Modelling

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Jenny; Edlund, O.; Hermann, J.; Johansson, Lise-Lotte

    1999-01-01

    The INTRA Manual consists of two volumes. Volume I of the manual is a thorough description of the code INTRA, the Physical modelling of INTRA and the ruling numerical methods and volume II, the User`s Manual is an input description. This document, the Physical modelling of INTRA, contains code characteristics, integration methods and applications

  8. Hydrogeological Site Descriptive Model - a strategy for its development during Site Investigations

    Energy Technology Data Exchange (ETDEWEB)

    Rhen, Ingvar [SWECO VIAK AB, Goeteborg (Sweden); Follin, Sven [SF GeoLogic AB, Stockholm (Sweden); Hermanson, Jan [Golder Associates, Stockholm (Sweden)

    2003-04-01

    The report is to present a strategy for the development of the Site Descriptive Hydrogeological Model within the SKB Site Investigation Programme. The report, and similar reports from the Geology, Rock Mechanics, Thermal properties, Hydrogeochemistry, Transport Properties and Surface Ecosystem disciplines are intended to guide SKB Site Descriptive Modelling but also to provide the authorities with an overview of how the modelling should be performed. Thus the objectives of this report are to: provide guidelines for the modelling of different sites resulting in consistent handling of modelling issues during the Site Investigations, provide a structure for the modelling sequence that is suitable for the establishment of a Site Descriptive model and provide some necessary details that should be considered in a Site Descriptive model.

  9. Hydrogeological Site Descriptive Model - a strategy for its development during Site Investigations

    International Nuclear Information System (INIS)

    Rhen, Ingvar; Follin, Sven; Hermanson, Jan

    2003-04-01

    The report is to present a strategy for the development of the Site Descriptive Hydrogeological Model within the SKB Site Investigation Programme. The report, and similar reports from the Geology, Rock Mechanics, Thermal properties, Hydrogeochemistry, Transport Properties and Surface Ecosystem disciplines are intended to guide SKB Site Descriptive Modelling but also to provide the authorities with an overview of how the modelling should be performed. Thus the objectives of this report are to: provide guidelines for the modelling of different sites resulting in consistent handling of modelling issues during the Site Investigations, provide a structure for the modelling sequence that is suitable for the establishment of a Site Descriptive model and provide some necessary details that should be considered in a Site Descriptive model

  10. Hypsilara breweri n.sp. from Venezuela: description of new species with notes on the morphology and phylogenetic relationships of the genus (Coleoptera: Elmidae: Larainae).

    Science.gov (United States)

    Ciampor, Fedor; Laššová, Kristína; Ciamporová-Zatovičová, Zuzana

    2013-01-01

    A new species of the genus Hypsilara Maier & Spangler, 2011, collected in the Eastern Venezuela, is described and illustrated. We provide habitus photographs, detail drawings of both male and female genitalia, and description of some morphological features, which were omitted in the description of the genus. Included are also remarks on the distribution and genetic distance of the Hypsilara species and possible relations to other South American Larainae.

  11. Architecture Descriptions. A Contribution to Modeling of Production System Architecture

    DEFF Research Database (Denmark)

    Jepsen, Allan Dam; Hvam, Lars

    a proper understanding of the architecture phenomenon and the ability to describe it in a manner that allow the architecture to be communicated to and handled by stakeholders throughout the company. Despite the existence of several design philosophies in production system design such as Lean, that focus......The subject of this PhD dissertation is architecture-centric design and the description of production system architecture. Companies are facing demands for the development and production of new products at an ever increasing rate, as the market life of products decreases and the rate at which...... customers demand new product features and performance accelerates. Many of these companies are seeking to keep pace with market demands and the pressures of low cost production in other countries by adopting an architecture-centric or platform based approach to the design of their production systems...

  12. Using ensemble models to classify the sentiment expressed in suicide notes.

    Science.gov (United States)

    McCart, James A; Finch, Dezon K; Jarman, Jay; Hickling, Edward; Lind, Jason D; Richardson, Matthew R; Berndt, Donald J; Luther, Stephen L

    2012-01-01

    In 2007, suicide was the tenth leading cause of death in the U.S. Given the significance of this problem, suicide was the focus of the 2011 Informatics for Integrating Biology and the Bedside (i2b2) Natural Language Processing (NLP) shared task competition (track two). Specifically, the challenge concentrated on sentiment analysis, predicting the presence or absence of 15 emotions (labels) simultaneously in a collection of suicide notes spanning over 70 years. Our team explored multiple approaches combining regular expression-based rules, statistical text mining (STM), and an approach that applies weights to text while accounting for multiple labels. Our best submission used an ensemble of both rules and STM models to achieve a micro-averaged F(1) score of 0.5023, slightly above the mean from the 26 teams that competed (0.4875).

  13. Context discovery using attenuated Bloom codes: model description and validation

    NARCIS (Netherlands)

    Liu, F.; Heijenk, Geert

    A novel approach to performing context discovery in ad-hoc networks based on the use of attenuated Bloom filters is proposed in this report. In order to investigate the performance of this approach, a model has been developed. This document describes the model and its validation. The model has been

  14. Description of the General Equilibrium Model of Ecosystem Services (GEMES)

    Science.gov (United States)

    Travis Warziniack; David Finnoff; Jenny Apriesnig

    2017-01-01

    This paper serves as documentation for the General Equilibrium Model of Ecosystem Services (GEMES). GEMES is a regional computable general equilibrium model that is composed of values derived from natural capital and ecosystem services. It models households, producing sectors, and governments, linked to one another through commodity and factor markets. GEMES was...

  15. Pure NOTES rectosigmoid resection: transgastric endoscopic IMA dissection and transanal rectal mobilization in animal models.

    Science.gov (United States)

    Park, Sun Jin; Lee, Kil Yeon; Choi, Sung Il; Kang, Byung Mo; Huh, Chang; Choi, Dong Hyun; Lee, Chang Kyun

    2013-07-01

    We report a pure natural orifice translumenal endoscopic surgery (NOTES(®); American Society for Gastrointestinal Endoscopy [Oak Brook, IL] and the Society of American Gastrointestinal and Endoscopic Surgeons [Los Angeles, CA]) rectosigmoidectomy in animal models using transgastric endoscopic inferior mesenteric artery (IMA) dissection and transanal rectal mobilization. Ten live animals (2 pigs weighing 35-40 kg each and 8 dogs weighing 25-30 kg each) were used. A gastrotomy was made using a needle-knife puncture and the balloon dilatation technique or following the creation of a submucosal tunnel. A circular stapler shaft was transanally inserted up to the sigmoid colon for spatial orientation and traction of the mesocolon. The IMA was endoscopically dissected using a Coagrasper™ (Olympus, Tokyo, Japan) and then clipped. Endoscopic division of the sigmoid mesocolon was conducted laterally toward the marginal artery. Transanal full-thickness circumferential rectal and mesorectal dissections were performed, and a colorectal anastomosis was performed using a circular stapler with a single stapling technique. During the transanal approach, the gastrotomy was closed using four endoscopic clips. Endoscopic dissection of the IMA was successful in all cases, but minor bleedings occurred in 3 cases. The mean time from dissection and clipping to division of the IMA was 36.7 minutes (range, 25-45 minutes). The mean operation time was 180.5 minutes (range, 145-210 minutes). There were no intraoperative complications or hemodynamic instability. The mean length of the resected specimen was 11.2 cm (range, 9-17 cm). A pure NOTES approach to rectosigmoid resection using transgastric endoscopic IMA dissection is technically feasible in animal models.

  16. Description of Muzzle Blast by Modified Ideal Scaling Models

    Directory of Open Access Journals (Sweden)

    Kevin S. Fansler

    1998-01-01

    Full Text Available Gun blast data from a large variety of weapons are scaled and presented for both the instantaneous energy release and the constant energy deposition rate models. For both ideal explosion models, similar amounts of data scatter occur for the peak overpressure but the instantaneous energy release model correlated the impulse data significantly better, particularly for the region in front of the gun. Two parameters that characterize gun blast are used in conjunction with the ideal scaling models to improve the data correlation. The gun-emptying parameter works particularly well with the instantaneous energy release model to improve data correlation. In particular, the impulse, especially in the forward direction of the gun, is correlated significantly better using the instantaneous energy release model coupled with the use of the gun-emptying parameter. The use of the Mach disc location parameter improves the correlation only marginally. A predictive model is obtained from the modified instantaneous energy release correlation.

  17. Technical Note: Probabilistically constraining proxy age–depth models within a Bayesian hierarchical reconstruction model

    Directory of Open Access Journals (Sweden)

    J. P. Werner

    2015-03-01

    Full Text Available Reconstructions of the late-Holocene climate rely heavily upon proxies that are assumed to be accurately dated by layer counting, such as measurements of tree rings, ice cores, and varved lake sediments. Considerable advances could be achieved if time-uncertain proxies were able to be included within these multiproxy reconstructions, and if time uncertainties were recognized and correctly modeled for proxies commonly treated as free of age model errors. Current approaches for accounting for time uncertainty are generally limited to repeating the reconstruction using each one of an ensemble of age models, thereby inflating the final estimated uncertainty – in effect, each possible age model is given equal weighting. Uncertainties can be reduced by exploiting the inferred space–time covariance structure of the climate to re-weight the possible age models. Here, we demonstrate how Bayesian hierarchical climate reconstruction models can be augmented to account for time-uncertain proxies. Critically, although a priori all age models are given equal probability of being correct, the probabilities associated with the age models are formally updated within the Bayesian framework, thereby reducing uncertainties. Numerical experiments show that updating the age model probabilities decreases uncertainty in the resulting reconstructions, as compared with the current de facto standard of sampling over all age models, provided there is sufficient information from other data sources in the spatial region of the time-uncertain proxy. This approach can readily be generalized to non-layer-counted proxies, such as those derived from marine sediments.

  18. Bioenergy crop models: Descriptions, data requirements and future challenges

    Energy Technology Data Exchange (ETDEWEB)

    Nair, S. Surendran [University of Tennessee, Knoxville (UTK); Kang, Shujiang [ORNL; Zhang, Xuesong [Pacific Northwest National Laboratory (PNNL); Miguez, Fernando [Iowa State University; Izaurralde, Dr. R. Cesar [Pacific Northwest National Laboratory (PNNL); Post, Wilfred M [ORNL; Dietze, Michael [University of Illinois, Urbana-Champaign; Lynd, L. [Dartmouth College; Wullschleger, Stan D [ORNL

    2012-01-01

    Field studies that address the production of lignocellulosic biomass as a source of renewable energy provide critical data for the development of bioenergy crop models. A literature survey revealed that 14 models have been used for simulating bioenergy crops including herbaceous and woody bioenergy crops, and for crassulacean acid metabolism (CAM) crops. These models simulate field-scale production of biomass for switchgrass (ALMANAC, EPIC, and Agro-BGC), miscanthus (MISCANFOR, MISCANMOD, and WIMOVAC), sugarcane (APSIM, AUSCANE, and CANEGRO), and poplar and willow (SECRETS and 3PG). Two models are adaptations of dynamic global vegetation models and simulate biomass yields of miscanthus and sugarcane at regional scales (Agro-IBIS and LPJmL). Although it lacks the complexity of other bioenergy crop models, the environmental productivity index (EPI) is the only model used to estimate biomass production of CAM (Agave and Opuntia) plants. Except for the EPI model, all models include representations of leaf area dynamics, phenology, radiation interception and utilization, biomass production, and partitioning of biomass to roots and shoots. A few models simulate soil water, nutrient, and carbon cycle dynamics, making them especially useful for assessing the environmental consequences (e.g., erosion and nutrient losses) associated with the large-scale deployment of bioenergy crops. The rapid increase in use of models for energy crop simulation is encouraging; however, detailed information on the influence of climate, soils, and crop management practices on biomass production is scarce. Thus considerable work remains regarding the parameterization and validation of process-based models for bioenergy crops; generation and distribution of high-quality field data for model development and validation; and implementation of an integrated framework for efficient, high-resolution simulations of biomass production for use in planning sustainable bioenergy systems.

  19. Descriptive documentation for New Mexico uranium milling model

    International Nuclear Information System (INIS)

    Bonem, G.; Livevano, R.J.

    1981-01-01

    The New Mexico Uranium Milling Model is a linear programming model. It can demonstrate how cost minimizing management can reduce the costs of milling uranium subject to a series of environmental, resource, and technological constraints. For example, if 15,000 tons were the targeted level of milling output, the model would provide the minimum cost of this production level, given certain levels of environmental, fuel, water, and technological constraints. The model was developed to allow state policymakers to assess the uranium industry from various standpoints. Through the use of the model, state policymakers can determine the effects of air and water discharge standards and limited capital availability on: milling costs of production; uses of electricity, fuel, and water; and levels of air and water emissions. The model covers the following: process technologies which are acid leach and carbonate leach; raw materials mix; air and water discharges; residual treatment process; and plant types

  20. Description and comparison of energy impact assessment models

    Energy Technology Data Exchange (ETDEWEB)

    Burnett, R.A.; Fraley, D.W.

    1977-04-01

    During the past few years the need for more comprehensive analytical techniques for assessing the environmental, economic, and social impacts of energy supply-demand systems and related public policy-making activities has increased. The research and academic communities have responded to this need by developing a wide range of models and other analytical tools for energy impact estimation. The models generally fall into two categories: large-scale and specialized. This report examines the general features and shortcomings of current large-scale and specialized modeling efforts from the point of view of energy impact assessment. Characteristics deemed desirable in large-scale energy-impact-assessment models and related studies are discussed. An outline of criteria for describing and comparing such models is presented, from which seven large-scale energy models and one impact-assessment study are described and compared in considerable detail. Tables are also presented which summarize the results of the categorizations.

  1. LPJmL4 - a dynamic global vegetation model with managed land - Part 1: Model description

    Science.gov (United States)

    Schaphoff, Sibyll; von Bloh, Werner; Rammig, Anja; Thonicke, Kirsten; Biemans, Hester; Forkel, Matthias; Gerten, Dieter; Heinke, Jens; Jägermeyr, Jonas; Knauer, Jürgen; Langerwisch, Fanny; Lucht, Wolfgang; Müller, Christoph; Rolinski, Susanne; Waha, Katharina

    2018-04-01

    This paper provides a comprehensive description of the newest version of the Dynamic Global Vegetation Model with managed Land, LPJmL4. This model simulates - internally consistently - the growth and productivity of both natural and agricultural vegetation as coherently linked through their water, carbon, and energy fluxes. These features render LPJmL4 suitable for assessing a broad range of feedbacks within and impacts upon the terrestrial biosphere as increasingly shaped by human activities such as climate change and land use change. Here we describe the core model structure, including recently developed modules now unified in LPJmL4. Thereby, we also review LPJmL model developments and evaluations in the field of permafrost, human and ecological water demand, and improved representation of crop types. We summarize and discuss LPJmL model applications dealing with the impacts of historical and future environmental change on the terrestrial biosphere at regional and global scale and provide a comprehensive overview of LPJmL publications since the first model description in 2007. To demonstrate the main features of the LPJmL4 model, we display reference simulation results for key processes such as the current global distribution of natural and managed ecosystems, their productivities, and associated water fluxes. A thorough evaluation of the model is provided in a companion paper. By making the model source code freely available at https://gitlab.pik-potsdam.de/lpjml/LPJmL, we hope to stimulate the application and further development of LPJmL4 across scientific communities in support of major activities such as the IPCC and SDG process.

  2. Stochastic description of heterogeneities of permeability within groundwater flow models

    International Nuclear Information System (INIS)

    Cacas, M.C.; Lachassagne, P.; Ledoux, E.; Marsily, G. de

    1991-01-01

    In order to model radionuclide migration in the geosphere realistically at the field scale, the hydrogeologist needs to be able to simulate groundwater flow in heterogeneous media. Heterogeneity of the medium can be described using a stochastic approach, that affects the way in which a flow model is formulated. In this paper, we discuss the problems that we have encountered in modelling both continuous and fractured media. The stochastic approach leads to a methodology that enables local measurements of permeability to be integrated into a model which gives a good prediction of groundwater flow on a regional scale. 5 Figs.; 8 Refs

  3. Pattern formation in flocking models: A hydrodynamic description

    Science.gov (United States)

    Solon, Alexandre P.; Caussin, Jean-Baptiste; Bartolo, Denis; Chaté, Hugues; Tailleur, Julien

    2015-12-01

    We study in detail the hydrodynamic theories describing the transition to collective motion in polar active matter, exemplified by the Vicsek and active Ising models. Using a simple phenomenological theory, we show the existence of an infinity of propagative solutions, describing both phase and microphase separation, that we fully characterize. We also show that the same results hold specifically in the hydrodynamic equations derived in the literature for the active Ising model and for a simplified version of the Vicsek model. We then study numerically the linear stability of these solutions. We show that stable ones constitute only a small fraction of them, which, however, includes all existing types. We further argue that, in practice, a coarsening mechanism leads towards phase-separated solutions. Finally, we construct the phase diagrams of the hydrodynamic equations proposed to qualitatively describe the Vicsek and active Ising models and connect our results to the phenomenology of the corresponding microscopic models.

  4. Pattern formation in flocking models: A hydrodynamic description.

    Science.gov (United States)

    Solon, Alexandre P; Caussin, Jean-Baptiste; Bartolo, Denis; Chaté, Hugues; Tailleur, Julien

    2015-12-01

    We study in detail the hydrodynamic theories describing the transition to collective motion in polar active matter, exemplified by the Vicsek and active Ising models. Using a simple phenomenological theory, we show the existence of an infinity of propagative solutions, describing both phase and microphase separation, that we fully characterize. We also show that the same results hold specifically in the hydrodynamic equations derived in the literature for the active Ising model and for a simplified version of the Vicsek model. We then study numerically the linear stability of these solutions. We show that stable ones constitute only a small fraction of them, which, however, includes all existing types. We further argue that, in practice, a coarsening mechanism leads towards phase-separated solutions. Finally, we construct the phase diagrams of the hydrodynamic equations proposed to qualitatively describe the Vicsek and active Ising models and connect our results to the phenomenology of the corresponding microscopic models.

  5. Advancing reservoir operation description in physically based hydrological models

    Science.gov (United States)

    Anghileri, Daniela; Giudici, Federico; Castelletti, Andrea; Burlando, Paolo

    2016-04-01

    Last decades have seen significant advances in our capacity of characterizing and reproducing hydrological processes within physically based models. Yet, when the human component is considered (e.g. reservoirs, water distribution systems), the associated decisions are generally modeled with very simplistic rules, which might underperform in reproducing the actual operators' behaviour on a daily or sub-daily basis. For example, reservoir operations are usually described by a target-level rule curve, which represents the level that the reservoir should track during normal operating conditions. The associated release decision is determined by the current state of the reservoir relative to the rule curve. This modeling approach can reasonably reproduce the seasonal water volume shift due to reservoir operation. Still, it cannot capture more complex decision making processes in response, e.g., to the fluctuations of energy prices and demands, the temporal unavailability of power plants or varying amount of snow accumulated in the basin. In this work, we link a physically explicit hydrological model with detailed hydropower behavioural models describing the decision making process by the dam operator. In particular, we consider two categories of behavioural models: explicit or rule-based behavioural models, where reservoir operating rules are empirically inferred from observational data, and implicit or optimization based behavioural models, where, following a normative economic approach, the decision maker is represented as a rational agent maximising a utility function. We compare these two alternate modelling approaches on the real-world water system of Lake Como catchment in the Italian Alps. The water system is characterized by the presence of 18 artificial hydropower reservoirs generating almost 13% of the Italian hydropower production. Results show to which extent the hydrological regime in the catchment is affected by different behavioural models and reservoir

  6. Technical note: Improving modeling of coagulation, curd firming, and syneresis of sheep milk.

    Science.gov (United States)

    Cipolat-Gotet, Claudio; Pazzola, Michele; Ferragina, Alessandro; Cecchinato, Alessio; Dettori, Maria L; Vacca, Giuseppe M

    2018-04-18

    The importance of milk coagulation properties for milk processing, cheese yield, and quality is widely recognized. The use of traditional coagulation traits presents several limitations for testing bovine milk and even more for sheep milk, due to its rapid coagulation and curd firming, and early syneresis of coagulum. The aim of this technical note is to test and improve model fitting for assessing coagulation, curd firming, and syneresis of sheep milk. Using milk samples from 87 Sarda ewes, we performed in duplicate lactodynamographic testing. On each of the 174 analyzed milk aliquots, using 180 observations from each aliquot (one every 15 s for 45 min after rennet addition), we compared 4 different curd firming models as a function of time (CF t , mm) using a nonlinear procedure. The most accurate and informative results were observed using a modified 4-parameter model, structured as follows: [Formula: see text] , where t is time, RCT eq (min) is the gelation time, CF P (mm) is the potential asymptotical CF at an infinite time, k CF (%/min) is the curd firming rate constant, and k SR (%/min) is the curd syneresis rate constant. To avoid nonconvergence and computational problems due to interrelations among the equation parameters, CF P was preliminarily defined as a function of maximum observed curd firmness (CF max , mm) recorded during the analysis. For this model, all the modeling equations of individual sheep milk aliquots were converging, with a negligible standard error of the estimates (coefficient of determination >0.99 for all individual sample equations). Repeatability of the modeled parameters was acceptable, also in the presence of curd syneresis during the lactodynamographic analysis. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

  7. Integrating cognitive process and descriptive models of attitudes and preferences.

    Science.gov (United States)

    Hawkins, Guy E; Marley, A A J; Heathcote, Andrew; Flynn, Terry N; Louviere, Jordan J; Brown, Scott D

    2014-01-01

    Discrete choice experiments--selecting the best and/or worst from a set of options--are increasingly used to provide more efficient and valid measurement of attitudes or preferences than conventional methods such as Likert scales. Discrete choice data have traditionally been analyzed with random utility models that have good measurement properties but provide limited insight into cognitive processes. We extend a well-established cognitive model, which has successfully explained both choices and response times for simple decision tasks, to complex, multi-attribute discrete choice data. The fits, and parameters, of the extended model for two sets of choice data (involving patient preferences for dermatology appointments, and consumer attitudes toward mobile phones) agree with those of standard choice models. The extended model also accounts for choice and response time data in a perceptual judgment task designed in a manner analogous to best-worst discrete choice experiments. We conclude that several research fields might benefit from discrete choice experiments, and that the particular accumulator-based models of decision making used in response time research can also provide process-level instantiations for random utility models. © 2013 Cognitive Science Society, Inc.

  8. RELAP5 Model Description and Validation for the BR2 Loss-of-Flow Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Licht, J. R. [Argonne National Lab. (ANL), Argonne, IL (United States); Dionne, B. [Argonne National Lab. (ANL), Argonne, IL (United States); Van den Branden, G. [Argonne National Lab. (ANL), Argonne, IL (United States); Sikik, E. [Argonne National Lab. (ANL), Argonne, IL (United States); Koonen, E. [Argonne National Lab. (ANL), Argonne, IL (United States)

    2015-07-01

    This paper presents a description of the RELAP5 model, the calibration method used to obtain the minor loss coefficients from the available hydraulic data and the LOFA simulation results compared to the 1963 experimental tests for HEU fuel.

  9. Software Test Description (STD) for the Globally Relocatable Navy Tide/Atmospheric Modeling System (PCTides)

    National Research Council Canada - National Science Library

    Posey, Pamela

    2002-01-01

    The purpose of this Software Test Description (STD) is to establish formal test cases to be used by personnel tasked with the installation and verification of the Globally Relocatable Navy Tide/Atmospheric Modeling System (PCTides...

  10. A simulation model for wind energy storage systems. Volume 3: Program descriptions

    Science.gov (United States)

    Warren, A. W.; Edsinger, R. W.; Burroughs, J. D.

    1977-01-01

    Program descriptions, flow charts, and program listings for the SIMWEST model generation program, the simulation program, the file maintenance program, and the printer plotter program are given. For Vol 2, see .

  11. Thermodynamically consistent description of criticality in models of correlated electrons

    Czech Academy of Sciences Publication Activity Database

    Janiš, Václav; Kauch, Anna; Pokorný, Vladislav

    2017-01-01

    Roč. 95, č. 4 (2017), s. 1-14, č. článku 045108. ISSN 2469-9950 R&D Projects: GA ČR GA15-14259S Institutional support: RVO:68378271 Keywords : conserving approximations * Anderson model * Hubbard model * parquet equations Subject RIV: BM - Solid Matter Physics ; Magnetism OBOR OECD: Condensed matter physics (including formerly solid state physics, supercond.) Impact factor: 3.836, year: 2016

  12. Description of the National Hydrologic Model for use with the Precipitation-Runoff Modeling System (PRMS)

    Science.gov (United States)

    Regan, R. Steven; Markstrom, Steven L.; Hay, Lauren E.; Viger, Roland J.; Norton, Parker A.; Driscoll, Jessica M.; LaFontaine, Jacob H.

    2018-01-08

    This report documents several components of the U.S. Geological Survey National Hydrologic Model of the conterminous United States for use with the Precipitation-Runoff Modeling System (PRMS). It provides descriptions of the (1) National Hydrologic Model, (2) Geospatial Fabric for National Hydrologic Modeling, (3) PRMS hydrologic simulation code, (4) parameters and estimation methods used to compute spatially and temporally distributed default values as required by PRMS, (5) National Hydrologic Model Parameter Database, and (6) model extraction tool named Bandit. The National Hydrologic Model Parameter Database contains values for all PRMS parameters used in the National Hydrologic Model. The methods and national datasets used to estimate all the PRMS parameters are described. Some parameter values are derived from characteristics of topography, land cover, soils, geology, and hydrography using traditional Geographic Information System methods. Other parameters are set to long-established default values and computation of initial values. Additionally, methods (statistical, sensitivity, calibration, and algebraic) were developed to compute parameter values on the basis of a variety of nationally-consistent datasets. Values in the National Hydrologic Model Parameter Database can periodically be updated on the basis of new parameter estimation methods and as additional national datasets become available. A companion ScienceBase resource provides a set of static parameter values as well as images of spatially-distributed parameters associated with PRMS states and fluxes for each Hydrologic Response Unit across the conterminuous United States.

  13. Thermal site descriptive model. A strategy for the model development during site investigations - version 2

    International Nuclear Information System (INIS)

    Back, Paer-Erik; Sundberg, Jan

    2007-09-01

    This report presents a strategy for describing, predicting and visualising the thermal aspects of the site descriptive model. The strategy is an updated version of an earlier strategy applied in all SDM versions during the initial site investigation phase at the Forsmark and Oskarshamn areas. The previous methodology for thermal modelling did not take the spatial correlation fully into account during simulation. The result was that the variability of thermal conductivity in the rock mass was not sufficiently well described. Experience from earlier thermal SDMs indicated that development of the methodology was required in order describe the spatial distribution of thermal conductivity in the rock mass in a sufficiently reliable way, taking both variability within rock types and between rock types into account. A good description of the thermal conductivity distribution is especially important for the lower tail. This tail is important for the design of a repository because it affects the canister spacing. The presented approach is developed to be used for final SDM regarding thermal properties, primarily thermal conductivity. Specific objectives for the strategy of thermal stochastic modelling are: Description: statistical description of the thermal conductivity of a rock domain. Prediction: prediction of thermal conductivity in a specific rock volume. Visualisation: visualisation of the spatial distribution of thermal conductivity. The thermal site descriptive model should include the temperature distribution and thermal properties of the rock mass. The temperature is the result of the thermal processes in the repository area. Determination of thermal transport properties can be made using different methods, such as laboratory investigations, field measurements, modelling from mineralogical composition and distribution, modelling from density logging and modelling from temperature logging. The different types of data represent different scales, which has to be

  14. Thermal site descriptive model. A strategy for the model development during site investigations - version 2

    Energy Technology Data Exchange (ETDEWEB)

    Back, Paer-Erik; Sundberg, Jan [Geo Innova AB (Sweden)

    2007-09-15

    This report presents a strategy for describing, predicting and visualising the thermal aspects of the site descriptive model. The strategy is an updated version of an earlier strategy applied in all SDM versions during the initial site investigation phase at the Forsmark and Oskarshamn areas. The previous methodology for thermal modelling did not take the spatial correlation fully into account during simulation. The result was that the variability of thermal conductivity in the rock mass was not sufficiently well described. Experience from earlier thermal SDMs indicated that development of the methodology was required in order describe the spatial distribution of thermal conductivity in the rock mass in a sufficiently reliable way, taking both variability within rock types and between rock types into account. A good description of the thermal conductivity distribution is especially important for the lower tail. This tail is important for the design of a repository because it affects the canister spacing. The presented approach is developed to be used for final SDM regarding thermal properties, primarily thermal conductivity. Specific objectives for the strategy of thermal stochastic modelling are: Description: statistical description of the thermal conductivity of a rock domain. Prediction: prediction of thermal conductivity in a specific rock volume. Visualisation: visualisation of the spatial distribution of thermal conductivity. The thermal site descriptive model should include the temperature distribution and thermal properties of the rock mass. The temperature is the result of the thermal processes in the repository area. Determination of thermal transport properties can be made using different methods, such as laboratory investigations, field measurements, modelling from mineralogical composition and distribution, modelling from density logging and modelling from temperature logging. The different types of data represent different scales, which has to be

  15. Headwater Benefits Energy Gains (HWBEG) model description and users manual

    Energy Technology Data Exchange (ETDEWEB)

    Perlack, R D; Turhollow, Jr, A F; Cohn, S M; Das, S; Rizy, C G; Tulley, Jr, J H; Kraemer, R D

    1984-02-01

    The Headwater Benefits Energy Gains (HWBEG) Model was developed for computing energy gains in complex regulated river basins. The model requires daily data on streamflows, storage changes at reservoirs, and power generation at hydroelectric plants. Mathematical relationships are derived from these data to explain the operation of storage reservoirs and the rating of hydropower plants. The HWBEG model assembles streamflows that would have been theoretically available for energy production under varying conditions of upstream reservoir operation. The model first eliminates all upstream storage changes to simulate an unregulated natural flow condition. The storage changes of upstream reservoirs are then added back to the unregulated natural flow in a sequence corresponding to the time the reservoirs began affecting streamflows. As each reservoir is added back to the river system, the hydropower generation attributable to that particular flow is calculated using the reservoir operating rules and the hydropower plant rating curves. Energy gains are determined by subtracting generation with from generation without the chronologically sequenced and combinatorial effects of the upstream storage reservoirs. The energy gains attributable to each storage reservoir are totalled yearly and become the basis for apportioning the cost of operating the upstream federal reservoir or headwater improvement. This report describes the operation of the model including the assembly of the requisite data bases and the use of the computer code.

  16. Activated aging dynamics and effective trap model description in the random energy model

    Science.gov (United States)

    Baity-Jesi, M.; Biroli, G.; Cammarota, C.

    2018-01-01

    We study the out-of-equilibrium aging dynamics of the random energy model (REM) ruled by a single spin-flip Metropolis dynamics. We focus on the dynamical evolution taking place on time-scales diverging with the system size. Our aim is to show to what extent the activated dynamics displayed by the REM can be described in terms of an effective trap model. We identify two time regimes: the first one corresponds to the process of escaping from a basin in the energy landscape and to the subsequent exploration of high energy configurations, whereas the second one corresponds to the evolution from a deep basin to the other. By combining numerical simulations with analytical arguments we show why the trap model description does not hold in the former but becomes exact in the second.

  17. Modelling transparency: A research note on accepting a new paradigm in business reporting

    DEFF Research Database (Denmark)

    Nielsen, Christian

    2005-01-01

    of construction - Business reporting does not affect stock prices in the same manner as earnings announcements and similar financial information because business reporting is a field concerned with understanding the company and not the stock price - Transparency must be understood from a perspective alternative......Key points: - Measuring intangible assets constitutes an accounting perspective on voluntary disclosure - However, business reporting constitutes a strategy perspective on voluntary disclosure - ICAEW should move from an accounting to a strategy perspective and leave the intangible assets debate......, which was to a large extent abandoned by the academic community at the turn of the millennium - A business reporting model must incorporate the four generic components: 1. An external communication purpose 2. A description of content 3. A structure for disclosing content 4. A defined method...

  18. Semantic description of three-dimensional models of Bologna porches

    Directory of Open Access Journals (Sweden)

    Massimo Ballabeni

    2015-07-01

    Full Text Available The study is part of a broader search coordinated by the Department of Architecture of the University of Bologna, the Cineca and the city of Bologna for the nomination of the city porticoes in the UNESCO World Heritage Site. The study describes, first, the problems and the methods adopted for the survey, the numerical modeling and visualization of the arcades models. In addition, the paper aims to describe a method for the semantic studying of the porticoes architecture and the segmentation of the models. The goal is also to establish an integrated approach to the semantic cataloguing of the Bologna arcades based on historical, material, formal, dimensional and theoretical data, and to make this information easily readable and communicable.

  19. Biomass Scenario Model Scenario Library: Definitions, Construction, and Description

    Energy Technology Data Exchange (ETDEWEB)

    Inman, D.; Vimmerstedt, L.; Bush, B.; Peterson, S.

    2014-04-01

    Understanding the development of the biofuels industry in the United States is important to policymakers and industry. The Biomass Scenario Model (BSM) is a system dynamics model of the biomass-to-biofuels system that can be used to explore policy effects on biofuels development. Because of the complexity of the model, as well as the wide range of possible future conditions that affect biofuels industry development, we have not developed a single reference case but instead developed a set of specific scenarios that provide various contexts for our analyses. The purpose of this report is to describe the scenarios that comprise the BSM scenario library. At present, we have the following policy-focused scenarios in our library: minimal policies, ethanol-focused policies, equal access to policies, output-focused policies, technological diversity focused, and the point-of-production- focused. This report describes each scenario, its policy settings, and general insights gained through use of the scenarios in analytic studies.

  20. Translation of a High-Level Temporal Model into Lower Level Models: Impact of Modelling at Different Description Levels

    DEFF Research Database (Denmark)

    Kraft, Peter; Sørensen, Jens Otto

    2001-01-01

    given types of properties, and examine how descriptions on higher levels translate into descriptions on lower levels. Our example looks at temporal properties where the information is concerned with the existence in time. In a high level temporal model with information kept in a three-dimensional space...... the existences in time can be mapped precisely and consistently securing a consistent handling of the temporal properties. We translate the high level temporal model into an entity-relationship model, with the information in a two-dimensional graph, and finally we look at the translations into relational...... and other textual models. We also consider the aptness of models that include procedural mechanisms such as active and object databases...

  1. Shell model description of band structure in 48Cr

    International Nuclear Information System (INIS)

    Vargas, Carlos E.; Velazquez, Victor M.

    2007-01-01

    The band structure for normal and abnormal parity bands in 48Cr are described using the m-scheme shell model. In addition to full fp-shell, two particles in the 1d3/2 orbital are allowed in order to describe intruder states. The interaction includes fp-, sd- and mixed matrix elements

  2. A Descriptive Model of Decision Making: Review of Idiographic Influences.

    Science.gov (United States)

    MacPhail-Wilcox, Bettye; Bryant, H. David

    1988-01-01

    This article provides an overview of decision-making literature, describes individual and organizational decision stages, and reviews selected idiographic influences on decision-making. Also presented is a model for predicting and explaining variations in decision outcomes. These outcomes include affective, cognitive, and behavioral conditions.…

  3. General Description of Fission Observables - JEFF Report 24. GEF Model

    International Nuclear Information System (INIS)

    Schmidt, Karl-Heinz; Jurado, Beatriz; Amouroux, Charlotte

    2014-06-01

    The Joint Evaluated Fission and Fusion (JEFF) Project is a collaborative effort among the member countries of the OECD Nuclear Energy Agency (NEA) Data Bank to develop a reference nuclear data library. The JEFF library contains sets of evaluated nuclear data, mainly for fission and fusion applications; it contains a number of different data types, including neutron and proton interaction data, radioactive decay data, fission yield data and thermal scattering law data. The General fission (GEF) model is based on novel theoretical concepts and ideas developed to model low energy nuclear fission. The GEF code calculates fission-fragment yields and associated quantities (e.g. prompt neutron and gamma) for a large range of nuclei and excitation energy. This opens up the possibility of a qualitative step forward to improve further the JEFF fission yields sub-library. This report describes the GEF model which explains the complex appearance of fission observables by universal principles of theoretical models and considerations on the basis of fundamental laws of physics and mathematics. The approach reveals a high degree of regularity and provides a considerable insight into the physics of the fission process. Fission observables can be calculated with a precision that comply with the needs for applications in nuclear technology. The relevance of the approach for examining the consistency of experimental results and for evaluating nuclear data is demonstrated. (authors)

  4. Thermal properties. Site descriptive modelling Forsmark - stage 2.2

    International Nuclear Information System (INIS)

    Back, Paer-Erik; Wrafter, John; Sundberg, Jan; Rosen, L ars

    2007-09-01

    The lithological data acquired from boreholes and mapping of the rock surface need to be reclassified into thermal rock classes, TRCs. The main reason is to simplify the simulations. The lithological data are used to construct models of the transition between different TRCs, thus describing the spatial statistical structure of each TRC. The result is a set of transition probability models that are used in the simulation of TRCs. The intermediate result of this first stochastic simulation is a number of realisations of the geology, each one equally probable. Based on the thermal data, a spatial statistical thermal model is constructed for each TRC. It consists of a statistical distribution and a variogram for each TRC. These are used in the stochastic simulation of thermal conductivity and the result is a number of equally probable realisations of thermal conductivity for the domain. In the next step, the realisations of TRCs (lithology) and thermal conductivity are merged, i.e. each realisation of geology is filled with simulated thermal conductivity values. The result is a set of realisations of thermal conductivity that considers both the difference in thermal properties between different TRCs, and the variability within each TRC. If the result is desired in a scale different from the simulation scale, i.e. the canister scale, upscaling of the realisations can be performed. The result is a set of equally probable realisations of thermal properties. The presented methodology was applied to rock domain RFM029 and RFM045. The main results are sets of realisations of thermal properties that can be used for further processing, most importantly for statistical analysis and numerical temperature simulations for the design of repository layout (distances between deposition holes). The main conclusions of the thermal modelling are: The choice of scale has a profound influence on the distribution of thermal conductivity values. The variance decreases and the lower tail

  5. Thermal properties. Site descriptive modelling Forsmark - stage 2.2

    Energy Technology Data Exchange (ETDEWEB)

    Back, Paer-Erik; Wrafter, John; Sundberg, Jan [Geo Innova AB (Sweden); Rosen, L ars [Sweco Viak AB (Sweden)

    2007-09-15

    The lithological data acquired from boreholes and mapping of the rock surface need to be reclassified into thermal rock classes, TRCs. The main reason is to simplify the simulations. The lithological data are used to construct models of the transition between different TRCs, thus describing the spatial statistical structure of each TRC. The result is a set of transition probability models that are used in the simulation of TRCs. The intermediate result of this first stochastic simulation is a number of realisations of the geology, each one equally probable. Based on the thermal data, a spatial statistical thermal model is constructed for each TRC. It consists of a statistical distribution and a variogram for each TRC. These are used in the stochastic simulation of thermal conductivity and the result is a number of equally probable realisations of thermal conductivity for the domain. In the next step, the realisations of TRCs (lithology) and thermal conductivity are merged, i.e. each realisation of geology is filled with simulated thermal conductivity values. The result is a set of realisations of thermal conductivity that considers both the difference in thermal properties between different TRCs, and the variability within each TRC. If the result is desired in a scale different from the simulation scale, i.e. the canister scale, upscaling of the realisations can be performed. The result is a set of equally probable realisations of thermal properties. The presented methodology was applied to rock domain RFM029 and RFM045. The main results are sets of realisations of thermal properties that can be used for further processing, most importantly for statistical analysis and numerical temperature simulations for the design of repository layout (distances between deposition holes). The main conclusions of the thermal modelling are: The choice of scale has a profound influence on the distribution of thermal conductivity values. The variance decreases and the lower tail

  6. The Identity of Culex (Melanoconion) taeniopus Dyar and Knab and Related Species with Notes on the Synonymy and Description of a New Species (Diptera, Culicidae)

    Science.gov (United States)

    1980-01-01

    Dyar ( 1920 :54; 1923:178); Bonne and Bonne-Wepster (1925:296-8). CuZex (Moehlostyrax) taeniopus in part of Dyar (1925:171; 1928:293-4). CuZex...Entomol. Argent. 16:99-121. Dyar , H. G. 1920 . The species of Choeroporpa, a subgenus of CuZex (Diptera, Culicidae). Inset. Inscit. Menst. 8:54-81. 1922...Mosquito Systematics Vol. 12(l) 1980 7 The Identity of CuZex (MeZanoconion) taeniopus Dyar and Knab and Related Species with Notes on the Synonymy

  7. System Advisor Model, SAM 2014.1.14: General Description

    Energy Technology Data Exchange (ETDEWEB)

    Blair, Nate [National Renewable Energy Lab. (NREL), Golden, CO (United States); Dobos, Aron P. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Freeman, Janine [National Renewable Energy Lab. (NREL), Golden, CO (United States); Neises, Ty [National Renewable Energy Lab. (NREL), Golden, CO (United States); Wagner, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ferguson, Tom [Global Resources, Northbrook, IL (United States); Gilman, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Janzou, Steven [Janzou Consulting, Idaho Springs, CO (United States)

    2014-02-01

    This document describes the capabilities of the U.S. Department of Energy and National Renewable Energy Laboratory's System Advisor Model (SAM), Version 2013.9.20, released on September 9, 2013. SAM is a computer model that calculates performance and financial metrics of renewable energy systems. Project developers, policy makers, equipment manufacturers, and researchers use graphs and tables of SAM results in the process of evaluating financial, technology, and incentive options for renewable energy projects. SAM simulates the performance of photovoltaic, concentrating solar power, solar water heating, wind, geothermal, biomass, and conventional power systems. The financial model can represent financial structures for projects that either buy and sell electricity at retail rates (residential and commercial) or sell electricity at a price determined in a power purchase agreement (utility). SAM's advanced simulation options facilitate parametric and sensitivity analyses, and statistical analysis capabilities are available for Monte Carlo simulation and weather variability (P50/P90) studies. SAM can also read input variables from Microsoft Excel worksheets. For software developers, the SAM software development kit (SDK) makes it possible to use SAM simulation modules in their applications written in C/C++, C#, Java, Python, and MATLAB. NREL provides both SAM and the SDK as free downloads at http://sam.nrel.gov. Technical support and more information about the software are available on the website.

  8. Description of waste pretreatment and interfacing systems dynamic simulation model

    Energy Technology Data Exchange (ETDEWEB)

    Garbrick, D.J.; Zimmerman, B.D.

    1995-05-01

    The Waste Pretreatment and Interfacing Systems Dynamic Simulation Model was created to investigate the required pretreatment facility processing rates for both high level and low level waste so that the vitrification of tank waste can be completed according to the milestones defined in the Tri-Party Agreement (TPA). In order to achieve this objective, the processes upstream and downstream of the pretreatment facilities must also be included. The simulation model starts with retrieval of tank waste and ends with vitrification for both low level and high level wastes. This report describes the results of three simulation cases: one based on suggested average facility processing rates, one with facility rates determined so that approximately 6 new DSTs are required, and one with facility rates determined so that approximately no new DSTs are required. It appears, based on the simulation results, that reasonable facility processing rates can be selected so that no new DSTs are required by the TWRS program. However, this conclusion must be viewed with respect to the modeling assumptions, described in detail in the report. Also included in the report, in an appendix, are results of two sensitivity cases: one with glass plant water recycle steams recycled versus not recycled, and one employing the TPA SST retrieval schedule versus a more uniform SST retrieval schedule. Both recycling and retrieval schedule appear to have a significant impact on overall tank usage.

  9. The electricity portfolio simulation model (EPSim) technical description.

    Energy Technology Data Exchange (ETDEWEB)

    Drennen, Thomas E.; Klotz, Richard (Hobart and William Smith Colleges, Geneva, NY)

    2005-09-01

    Stakeholders often have competing interests when selecting or planning new power plants. The purpose of developing this preliminary Electricity Portfolio Simulation Model (EPSim) is to provide a first cut, dynamic methodology and approach to this problem, that can subsequently be refined and validated, that may help energy planners, policy makers, and energy students better understand the tradeoffs associated with competing electricity portfolios. EPSim allows the user to explore competing electricity portfolios annually from 2002 to 2025 in terms of five different criteria: cost, environmental impacts, energy dependence, health and safety, and sustainability. Four additional criteria (infrastructure vulnerability, service limitations, policy needs and science and technology needs) may be added in future versions of the model. Using an analytic hierarchy process (AHP) approach, users or groups of users apply weights to each of the criteria. The default energy assumptions of the model mimic Department of Energy's (DOE) electricity portfolio to 2025 (EIA, 2005). At any time, the user can compare alternative portfolios to this reference case portfolio.

  10. Linking normative models of natural tasks to descriptive models of neural response.

    Science.gov (United States)

    Jaini, Priyank; Burge, Johannes

    2017-10-01

    Understanding how nervous systems exploit task-relevant properties of sensory stimuli to perform natural tasks is fundamental to the study of perceptual systems. However, there are few formal methods for determining which stimulus properties are most useful for a given natural task. As a consequence, it is difficult to develop principled models for how to compute task-relevant latent variables from natural signals, and it is difficult to evaluate descriptive models fit to neural response. Accuracy maximization analysis (AMA) is a recently developed Bayesian method for finding the optimal task-specific filters (receptive fields). Here, we introduce AMA-Gauss, a new faster form of AMA that incorporates the assumption that the class-conditional filter responses are Gaussian distributed. Then, we use AMA-Gauss to show that its assumptions are justified for two fundamental visual tasks: retinal speed estimation and binocular disparity estimation. Next, we show that AMA-Gauss has striking formal similarities to popular quadratic models of neural response: the energy model and the generalized quadratic model (GQM). Together, these developments deepen our understanding of why the energy model of neural response have proven useful, improve our ability to evaluate results from subunit model fits to neural data, and should help accelerate psychophysics and neuroscience research with natural stimuli.

  11. Geological discrete fracture network model for the Laxemar site. Site Descriptive Modelling. SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    La Pointe, Paul; Fox, Aaron (Golder Associates Inc (United States)); Hermanson, Jan; Oehman, Johan (Golder Associates AB, Stockholm (Sweden))

    2008-12-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is performing site characterization at two different locations, Forsmark and Laxemar, in order to locate a site for a final geologic repository for spent nuclear fuel. The program is built upon the development of Site Descriptive Models (SDMs) at specific timed data freezes. Each SDM is formed from discipline-specific reports from across the scientific spectrum. This report describes the methods, analyses, and conclusions of the modelling team in the production of the SDM-Site Laxemar geological discrete-fracture network (DFN) model. The DFN builds upon the work of other geological models, including the deformation zone and rock domain models. The geological DFN is a statistical model for stochastically simulating rock fractures and minor deformation zones at a scale of less than 1,000 m (the lower cut-off of the DZ models). The geological DFN is valid within six distinct fracture domains inside the Laxemar local model subarea: FSM{sub C}, FSM{sub E}W007, FSM{sub N}, FSM{sub N}E005, FSM{sub S}, and FSM{sub W}. The models are built using data from detailed surface outcrop maps, geophysical lineament maps, and the cored borehole record at Laxemar. The conceptual model for the SDM-Site Laxemar geological DFN model revolves around the identification of fracture domains based on relative fracture set intensities, orientation clustering, and the regional tectonic framework (including deformation zones). A single coupled fracture size/fracture intensity concept (the Base Model) based on a Pareto (power-law) distribution for fracture sizes was chosen as the recommended parameterisation. A slew of alternative size-intensity models were also carried through the fracture analyses and into the uncertainty and model verification analyses. Uncertainty is modelled by analysing the effects on fracture intensity (P32) that alternative model cases can have. Uncertainty is parameterised as a ratio between the P32 of the

  12. Geological discrete fracture network model for the Laxemar site. Site Descriptive Modelling. SDM-Site Laxemar

    International Nuclear Information System (INIS)

    La Pointe, Paul; Fox, Aaron; Hermanson, Jan; Oehman, Johan

    2008-10-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is performing site characterization at two different locations, Forsmark and Laxemar, in order to locate a site for a final geologic repository for spent nuclear fuel. The program is built upon the development of Site Descriptive Models (SDMs) at specific timed data freezes. Each SDM is formed from discipline-specific reports from across the scientific spectrum. This report describes the methods, analyses, and conclusions of the modelling team in the production of the SDM-Site Laxemar geological discrete-fracture network (DFN) model. The DFN builds upon the work of other geological models, including the deformation zone and rock domain models. The geological DFN is a statistical model for stochastically simulating rock fractures and minor deformation zones at a scale of less than 1,000 m (the lower cut-off of the DZ models). The geological DFN is valid within six distinct fracture domains inside the Laxemar local model subarea: FSM C , FSM E W007, FSM N , FSM N E005, FSM S , and FSM W . The models are built using data from detailed surface outcrop maps, geophysical lineament maps, and the cored borehole record at Laxemar. The conceptual model for the SDM-Site Laxemar geological DFN model revolves around the identification of fracture domains based on relative fracture set intensities, orientation clustering, and the regional tectonic framework (including deformation zones). A single coupled fracture size/fracture intensity concept (the Base Model) based on a Pareto (power-law) distribution for fracture sizes was chosen as the recommended parameterisation. A slew of alternative size-intensity models were also carried through the fracture analyses and into the uncertainty and model verification analyses. Uncertainty is modelled by analysing the effects on fracture intensity (P32) that alternative model cases can have. Uncertainty is parameterised as a ratio between the P32 of the alternative model and the P

  13. Notes sur les limaces 2. Description d’une espèce nouvelle de Gigantomilax provenant des environs de Kouldja (Chine)

    NARCIS (Netherlands)

    Regteren Altena, van C.O.

    1954-01-01

    Parmi les limaces non-identifiées du Musée Zoologique d’Amsterdam, que M. le Professeur Dr. H. Engel et Mme. W. S. S. van der Feen née van Benthem Jutting ont bien voulu me permettre d’étudier, il se trouvait une espèce nouvelle dont je donne ci-après la description. Gigantomilax (Turcomilax)

  14. Notes on species of the genus Chlaenius Bonelli, 1810 (Coleoptera: Carabidae, Chlaeniini) from four agro-climatic zones of Rajasthan, with description of two new species.

    Science.gov (United States)

    Chanu, N Yaiphabi; Swaminathan, R

    2017-03-01

    Fourteen species of the genus Chlaenius from the semi-arid and sub-humid plain zones of Rajasthan (India) have been revised in this paper, including the description of two new species: Chlaenius (Lissauchenius) udaipurensis sp. nov. and Chlaenius (Chlaeniellus) pseudotristis sp. nov. A key to these species has been given with suitable line diagrams and photographs to illustrate key taxonomic characters including labrum, mentum, maxillary and labial palpi, pronotum, elytra and aedeagus.

  15. Geological Site Descriptive Model. A strategy for the model development during site investigations

    Energy Technology Data Exchange (ETDEWEB)

    Munier, Raymond; Stenberg, Leif [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Stanfors, Roy [Roy Stanfors Consulting, Lund (Sweden); Milnes, Allan Geoffrey [GEA Consulting, Uppsala (Sweden); Hermanson, Jan [Golder Associates, Stockholm (Sweden); Triumf, Carl-Axel [Geovista, Luleaa (Sweden)

    2003-04-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is at present conducting site investigations as a preliminary to building an underground nuclear waste disposal facility in Sweden. This report presents a methodology for constructing, visualising and presenting 3-dimensional geological models, based on data from the site investigations. The methodology integrates with the overall work-flow of the site investigations, from the collection of raw data to the complete site description, as proposed in several earlier technical reports. Further, it is specifically designed for interaction with SICADA - SKB's Site Characterisation Database - and RVS - SKB's Rock Visualisation System. This report is one in a series of strategy documents intended to demonstrate how modelling is to be performed within each discipline. However, it also has a wider purpose, since the geological site descriptive model provides the basic geometrical framework for all the other disciplines. Hence, the wider aim is to present a practical and clear methodology for the analysis and interpretation of input data for use in the construction of the geology-based 3D geometrical model. In addition to the various aspects of modelling described above, the methodology presented here should therefore also provide: guidelines and directives on how systematic interpretation and integration of geo-scientific data from the different investigation methods should be carried out; guidelines on how different geometries should be created in the geological models; guidelines on how the assignment of parameters to the different geological units in RVS should be accomplished; guidelines on the handling of uncertainty at different points in the interpretation process. In addition, it should clarify the relation between the geological model and other models used in the processes of site characterisation, repository layout and safety analysis. In particular, integration and transparency should be

  16. The collaborative historical African rainfall model: description and evaluation

    Science.gov (United States)

    Funk, Chris; Michaelsen, Joel; Verdin, Jim; Artan, Guleid; Husak, Greg; Senay, Gabriel; Gadain, Hussein; Magadazire, Tamuka

    2003-01-01

    In Africa the variability of rainfall in space and time is high, and the general availability of historical gauge data is low. This makes many food security and hydrologic preparedness activities difficult. In order to help overcome this limitation, we have created the Collaborative Historical African Rainfall Model (CHARM). CHARM combines three sources of information: climatologically aided interpolated (CAI) rainfall grids (monthly/0.5° ), National Centers for Environmental Prediction reanalysis precipitation fields (daily/1.875° ) and orographic enhancement estimates (daily/0.1° ). The first set of weights scales the daily reanalysis precipitation fields to match the gridded CAI monthly rainfall time series. This produces data with a daily/0.5° resolution. A diagnostic model of orographic precipitation, VDELB - based on the dot-product of the surface wind V and terrain gradient (DEL) and atmospheric buoyancy B - is then used to estimate the precipitation enhancement produced by complex terrain. Although the data are produced on 0.1° grids to facilitate integration with satellite-based rainfall estimates, the true resolution of the data will be less than this value, and varies with station density, topography, and precipitation dynamics. The CHARM is best suited, therefore, to applications that integrate rainfall or rainfall-driven model results over large regions.The CHARM time series is compared with three independent datasets: dekadal satellite-based rainfall estimates across the continent, dekadal interpolated gauge data in Mali, and daily interpolated gauge data in western Kenya. These comparisons suggest reasonable accuracies (standard errors of about half a standard deviation) when data are aggregated to regional scales, even at daily time steps. Thus constrained, numerical weather prediction precipitation fields do a reasonable job of representing large-scale diurnal variations. Published in 2003 by John Wiley & Sons, Ltd.

  17. Emergent phase space description of unitary matrix model

    Science.gov (United States)

    Chattopadhyay, Arghya; Dutta, Parikshit; Dutta, Suvankar

    2017-11-01

    We show that large N phases of a 0 dimensional generic unitary matrix model (UMM) can be described in terms of topologies of two dimensional droplets on a plane spanned by eigenvalue and number of boxes in Young diagram. Information about different phases of UMM is encoded in the geometry of droplets. These droplets are similar to phase space distributions of a unitary matrix quantum mechanics (UMQM) ((0 + 1) dimensional) on constant time slices. We find that for a given UMM, it is possible to construct an effective UMQM such that its phase space distributions match with droplets of UMM on different time slices at large N . Therefore, large N phase transitions in UMM can be understood in terms of dynamics of an effective UMQM. From the geometry of droplets it is also possible to construct Young diagrams corresponding to U( N) representations and hence different large N states of the theory in momentum space. We explicitly consider two examples: single plaquette model with Tr U 2 terms and Chern-Simons theory on S 3. We describe phases of CS theory in terms of eigenvalue distributions of unitary matrices and find dominant Young distributions for them.

  18. Description of a practice model for pharmacist medication review in a general practice setting

    DEFF Research Database (Denmark)

    Brandt, Mette; Hallas, Jesper; Hansen, Trine Graabæk

    2014-01-01

    BACKGROUND: Practical descriptions of procedures used for pharmacists' medication reviews are sparse. OBJECTIVE: To describe a model for medication review by pharmacists tailored to a general practice setting. METHODS: A stepwise model is described. The model is based on data from the medical chart...... no indication (n=47, 23%). Most interventions were aimed at cardiovascular drugs. CONCLUSION: We have provided a detailed description of a practical approach to pharmacists' medication review in a GP setting. The model was tested and found to be usable, and to deliver a medication review with high acceptance...

  19. Description of surface hydrology and near-surface hydrogeology at Forsmark. Site descriptive modelling SDM. Site Forsmark

    International Nuclear Information System (INIS)

    Johansson, Per-Olof

    2008-12-01

    This report describes the modelling of the surface hydrology and near-surface hydrogeology that was performed for the final site descriptive model of Forsmark produced in the site investigation stage, SDM-Site Forsmark. The comprehensive investigation and monitoring programme forms a strong basis for the developed conceptual and descriptive model of the hydrological and near-surface hydrological system of the site investigation area. However, there are some remaining uncertainties regarding the interaction of deep and near-surface groundwater and surface water of importance for the understanding of the system: The groundwaters in till below Lake Eckarfjaerden, Lake Gaellbotraesket, Lake Fiskarfjaerden and Lake Bolundsfjaerden have high salinities. The hydrological and hydrochemical interpretations indicate that these waters are relict waters of mainly marine origin. From the perspective of the overall water balance, the water below the central parts of the lakes can be considered as stagnant. However, according to the hydrochemical interpretation, these waters also contain weak signatures of deep saline water. Rough chloride budget calculations for the Gaellbotraesket depression also raise the question of a possible upward flow of deep groundwater. No absolute conclusion can be drawn from the existing data analyses regarding the key question of whether there is a small ongoing upward flow of deep saline water. However, Lake Bolundsfjaerden is an exception where the clear downward flow gradient from the till to the bedrock excludes the possibility of an active deep saline source. The available data indicate that there are no discharge areas for flow systems involving deep bedrock groundwater in the northern part of the tectonic lens, where the repository is planned to be located (the so-called 'target area'). However, it can not be excluded that such discharge areas exist. Data indicate that the prevailing downward vertical flow gradients from the QD to the bedrock

  20. Description of surface hydrology and near-surface hydrogeology at Forsmark. Site descriptive modelling SDM. Site Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Johansson, Per-Olof (Artesia Grundvattenkonsult AB, Taeby (Sweden))

    2008-12-15

    This report describes the modelling of the surface hydrology and near-surface hydrogeology that was performed for the final site descriptive model of Forsmark produced in the site investigation stage, SDM-Site Forsmark. The comprehensive investigation and monitoring programme forms a strong basis for the developed conceptual and descriptive model of the hydrological and near-surface hydrological system of the site investigation area. However, there are some remaining uncertainties regarding the interaction of deep and near-surface groundwater and surface water of importance for the understanding of the system: The groundwaters in till below Lake Eckarfjaerden, Lake Gaellbotraesket, Lake Fiskarfjaerden and Lake Bolundsfjaerden have high salinities. The hydrological and hydrochemical interpretations indicate that these waters are relict waters of mainly marine origin. From the perspective of the overall water balance, the water below the central parts of the lakes can be considered as stagnant. However, according to the hydrochemical interpretation, these waters also contain weak signatures of deep saline water. Rough chloride budget calculations for the Gaellbotraesket depression also raise the question of a possible upward flow of deep groundwater. No absolute conclusion can be drawn from the existing data analyses regarding the key question of whether there is a small ongoing upward flow of deep saline water. However, Lake Bolundsfjaerden is an exception where the clear downward flow gradient from the till to the bedrock excludes the possibility of an active deep saline source. The available data indicate that there are no discharge areas for flow systems involving deep bedrock groundwater in the northern part of the tectonic lens, where the repository is planned to be located (the so-called 'target area'). However, it can not be excluded that such discharge areas exist. Data indicate that the prevailing downward vertical flow gradients from the QD to

  1. Modeling Wood Encroachment in Abandoned Grasslands in the Eifel National Park - Model Description and Testing.

    Directory of Open Access Journals (Sweden)

    Silvana Hudjetz

    Full Text Available The degradation of natural and semi-natural landscapes has become a matter of global concern. In Germany, semi-natural grasslands belong to the most species-rich habitat types but have suffered heavily from changes in land use. After abandonment, the course of succession at a specific site is often difficult to predict because many processes interact. In order to support decision making when managing semi-natural grasslands in the Eifel National Park, we built the WoodS-Model (Woodland Succession Model. A multimodeling approach was used to integrate vegetation dynamics in both the herbaceous and shrub/tree layer. The cover of grasses and herbs was simulated in a compartment model, whereas bushes and trees were modelled in an individual-based manner. Both models worked and interacted in a spatially explicit, raster-based landscape. We present here the model description, parameterization and testing. We show highly detailed projections of the succession of a semi-natural grassland including the influence of initial vegetation composition, neighborhood interactions and ungulate browsing. We carefully weighted the single processes against each other and their relevance for landscape development under different scenarios, while explicitly considering specific site conditions. Model evaluation revealed that the model is able to emulate successional patterns as observed in the field as well as plausible results for different population densities of red deer. Important neighborhood interactions such as seed dispersal, the protection of seedlings from browsing ungulates by thorny bushes, and the inhibition of wood encroachment by the herbaceous layer, have been successfully reproduced. Therefore, not only a detailed model but also detailed initialization turned out to be important for spatially explicit projections of a given site. The advantage of the WoodS-Model is that it integrates these many mutually interacting processes of succession.

  2. Parallel community climate model: Description and user`s guide

    Energy Technology Data Exchange (ETDEWEB)

    Drake, J.B.; Flanery, R.E.; Semeraro, B.D.; Worley, P.H. [and others

    1996-07-15

    This report gives an overview of a parallel version of the NCAR Community Climate Model, CCM2, implemented for MIMD massively parallel computers using a message-passing programming paradigm. The parallel implementation was developed on an Intel iPSC/860 with 128 processors and on the Intel Delta with 512 processors, and the initial target platform for the production version of the code is the Intel Paragon with 2048 processors. Because the implementation uses a standard, portable message-passing libraries, the code has been easily ported to other multiprocessors supporting a message-passing programming paradigm. The parallelization strategy used is to decompose the problem domain into geographical patches and assign each processor the computation associated with a distinct subset of the patches. With this decomposition, the physics calculations involve only grid points and data local to a processor and are performed in parallel. Using parallel algorithms developed for the semi-Lagrangian transport, the fast Fourier transform and the Legendre transform, both physics and dynamics are computed in parallel with minimal data movement and modest change to the original CCM2 source code. Sequential or parallel history tapes are written and input files (in history tape format) are read sequentially by the parallel code to promote compatibility with production use of the model on other computer systems. A validation exercise has been performed with the parallel code and is detailed along with some performance numbers on the Intel Paragon and the IBM SP2. A discussion of reproducibility of results is included. A user`s guide for the PCCM2 version 2.1 on the various parallel machines completes the report. Procedures for compilation, setup and execution are given. A discussion of code internals is included for those who may wish to modify and use the program in their own research.

  3. Hydrogeochemical site descriptive model - a strategy for the model development during site investigations

    International Nuclear Information System (INIS)

    Smellie, John; Laaksoharju, Marcus; Tullborg, Eva-Lena

    2002-12-01

    In 2002, SKB commenced site characterisation investigations using deep boreholes at different sites. As an integral part of the planning work SKB has prepared a strategy to develop a Hydrogeochemical Site Descriptive Model; similar strategies have been developed for the other major geoscience disciplines. The main objectives of the Hydrogeochemical Site Descriptive Model are to describe the chemistry and distribution of the groundwater in the bedrock and overburden and the hydrogeochemical processes involved in its origin and evolution. This description is based primarily on measurements of the groundwater composition but incorporates the use of available geological and hydrogeological site descriptive models. The SKB hydrogeochemistry programme is planned to fulfil two basic requirements: 1) to provide representative and quality assured data for use as input parameter values in calculating long-term repository safety, and 2) to understand the present undisturbed hydrogeochemical conditions and how these conditions will change in the future. Parameter values for safety analysis include pH, Eh, S, SO 4 , HCO 3 , HPO 4 and TDS (mainly cations), together with colloids, fulvic and humic acids, other organics, bacteria and nitrogen. These values will be used to characterise the groundwater environment at, above and below repository depths. In the hydrogeochemical site investigation programme the number and location of the sampling points will be constrained by: a) geology (e.g. topography, overburden types, bedrock structures etc), b) hydrogeology (e.g. groundwater recharge/discharge areas, residence times), c) reliability (e.g. undisturbed vs disturbed groundwater chemical conditions), and d) resources (e.g. number and type of samples, and also available personnel, may be restricted by budgetary and schedule concerns). Naturally a balance is required between these constraints and the scientific aims of the programme. The constraints should never detrimentally affect

  4. NIDA Notes

    Science.gov (United States)

    ... Adolescent Brain Comorbidity College-Age & Young Adults Criminal Justice Drugged Driving Drug Testing Drugs and the Brain ... Notes Subscribe to NIDA Notes Subscribe by Topic View by interest area Treatment Basic Science Public Health ...

  5. Descriptions of two new species and one new subspecies from the Exocelina okbapensis-group, and notes on the E. aipo-group (Coleoptera, Dytiscidae, Copelatinae

    Directory of Open Access Journals (Sweden)

    Helena Shaverdo

    2017-11-01

    Full Text Available Two new species and one new subspecies of Exocelina Broun, 1886 from New Guinea are described: E. okbapensis Shaverdo & Balke, sp. n., E. okbapensis hajeki Shaverdo & Balke, ssp. n., and E. may Shaverdo & Balke, sp. n. These and two already described species are assigned to the E. okbapensis-group, which is morphologically (based on setation of the paramere and phylogenetically close to the E. aipo-group. On the latter, morphological and taxonomic notes are provided. An identification key to all known species of the groups is presented, and important diagnostic characters are illustrated. Data on the species distributions are mapped and show that the species occur only in the central mountain part of the island restricted by Wamena in the west and Sandaun Province in the east.

  6. The Chemistry of Atmosphere-Forest Exchange (CAFE Model – Part 1: Model description and characterization

    Directory of Open Access Journals (Sweden)

    G. M. Wolfe

    2011-01-01

    Full Text Available We present the Chemistry of Atmosphere-Forest Exchange (CAFE model, a vertically-resolved 1-D chemical transport model designed to probe the details of near-surface reactive gas exchange. CAFE integrates all key processes, including turbulent diffusion, emission, deposition and chemistry, throughout the forest canopy and mixed layer. CAFE utilizes the Master Chemical Mechanism (MCM and is the first model of its kind to incorporate a suite of reactions for the oxidation of monoterpenes and sesquiterpenes, providing a more comprehensive description of the oxidative chemistry occurring within and above the forest. We use CAFE to simulate a young Ponderosa pine forest in the Sierra Nevada, CA. Utilizing meteorological constraints from the BEARPEX-2007 field campaign, we assess the sensitivity of modeled fluxes to parameterizations of diffusion, laminar sublayer resistance and radiation extinction. To characterize the general chemical environment of this forest, we also present modeled mixing ratio profiles of biogenic hydrocarbons, hydrogen oxides and reactive nitrogen. The vertical profiles of these species demonstrate a range of structures and gradients that reflect the interplay of physical and chemical processes within the forest canopy, which can influence net exchange.

  7. Suicide notes.

    Science.gov (United States)

    O'Donnell, I; Farmer, R; Catalan, J

    1993-07-01

    Detailed case reports of incidents of suicide and attempted suicide on the London Underground railway system between 1985 and 1989 were examined for the presence of suicide notes. The incidence of note-leaving was 15%. Notes provided little insight into the causes of suicide as subjectively perceived, or strategies for suicide prevention.

  8. Vehicle Modeling for use in the CAFE model: Process description and modeling assumptions

    Energy Technology Data Exchange (ETDEWEB)

    Moawad, Ayman [Argonne National Lab. (ANL), Argonne, IL (United States); Kim, Namdoo [Argonne National Lab. (ANL), Argonne, IL (United States); Rousseau, Aymeric [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-06-01

    The objective of this project is to develop and demonstrate a process that, at a minimum, provides more robust information that can be used to calibrate inputs applicable under the CAFE model’s existing structure. The project will be more fully successful if a process can be developed that minimizes the need for decision trees and replaces the synergy factors by inputs provided directly from a vehicle simulation tool. The report provides a description of the process that was developed by Argonne National Laboratory and implemented in Autonomie.

  9. PREDICTIVE CAPACITY OF INSOLVENCY MODELS BASED ON ACCOUNTING NUMBERS AND DESCRIPTIVE DATA

    Directory of Open Access Journals (Sweden)

    Rony Petson Santana de Souza

    2012-09-01

    Full Text Available In Brazil, research into models to predict insolvency started in the 1970s, with most authors using discriminant analysis as a statistical tool in their models. In more recent years, authors have increasingly tried to verify whether it is possible to forecast insolvency using descriptive data contained in firms’ reports. This study examines the capacity of some insolvency models to predict the failure of Brazilian companies that have gone bankrupt. The study is descriptive in nature with a quantitative approach, based on research of documents. The sample is omposed of 13 companies that were declared bankrupt between 1997 and 2003. The results indicate that the majority of the insolvency prediction models tested showed high rates of correct forecasts. The models relying on descriptive reports on average were more likely to succeed than those based on accounting figures. These findings demonstrate that although some studies indicate a lack of validity of predictive models created in different business settings, some of these models have good capacity to forecast insolvency in Brazil. We can conclude that both models based on accounting numbers and those relying on descriptive reports can predict the failure of firms. Therefore, it can be inferred that the majority of bankruptcy prediction models that make use of accounting numbers can succeed in predicting the failure of firms.

  10. Study on the methodology for hydrogeological site descriptive modelling by discrete fracture networks

    International Nuclear Information System (INIS)

    Tanaka, Tatsuya; Ando, Kenichi; Hashimoto, Shuuji; Saegusa, Hiromitsu; Takeuchi, Shinji; Amano, Kenji

    2007-01-01

    This study aims to establish comprehensive techniques for site descriptive modelling considering the hydraulic heterogeneity due to the Water Conducting Features in fractured rocks. The WCFs was defined by the interpretation and integration of geological and hydrogeological data obtained from the deep borehole investigation campaign in the Mizunami URL project and Regional Hydrogeological Study. As a result of surface based investigation phase, the block-scale hydrogeological descriptive model was generated using hydraulic discrete fracture networks. Uncertainties and remaining issues associated with the assumption in interpreting the data and its modelling were addressed in a systematic way. (author)

  11. The genus Macrostemum Kolenati 1859 (Trichoptera: Hydropsychidae) in the Neotropical Region: Description of two new species, taxonomic notes, distributional records and key to males.

    Science.gov (United States)

    França, Diogo; Paprocki, Henrique; Calor, Adolfo R

    2013-01-01

    The genus Macrostemum Kolenati contains 105. described species, with 15 valid species in the Neotropical region. The Adults are recognized principally by wing membranes strongly marked with dark and light colors. The Neotropical species Of Macrostemum were described based on the wing colors patterns and body morphology. In this paper we present a taxonomic study of the Neotropical species, descriptions of two new species from Brazil, distributional records and a key to males. The male of Macrostemum negrense Flint 1978 is described for the first time, Names of three Neotropical species, M. ramosum (Navás 1916), M. trigramma (Navás 1916), and M. triste (Navás 1916) are designated nomina dubia.

  12. Impact of uncertainty description on assimilating hydraulic head in the MIKE SHE distributed hydrological model

    DEFF Research Database (Denmark)

    Zhang, Donghua; Madsen, Henrik; Ridler, Marc E.

    2015-01-01

    The ensemble Kalman filter (EnKF) is a popular data assimilation (DA) technique that has been extensively used in environmental sciences for combining complementary information from model predictions and observations. One of the major challenges in EnKF applications is the description of model un...... with respect to performance and sensitivity. Results show that inappropriate definition of model uncertainty can greatly degrade the assimilation performance, and an appropriate combination of different model uncertainty sources is advised....

  13. Testing the methodology for site descriptive modelling. Application for the Laxemar area

    International Nuclear Information System (INIS)

    Andersson, Johan; Berglund, Johan; Follin, Sven; Hakami, Eva; Halvarson, Jan; Hermanson, Jan; Laaksoharju, Marcus; Rhen, Ingvar; Wahlgren, C.H.

    2002-08-01

    A special project has been conducted where the currently available data from the Laxemar area, which is part of the Simpevarp site, have been evaluated and interpreted into a Site Descriptive Model covering: geology, hydrogeology, hydrogeochemistry and rock mechanics. Description of the surface ecosystem has been omitted, since it was re-characterised in another, parallel, project. Furthermore, there has been no evaluation of transport properties. The project is primarily a methodology test. The lessons learnt will be implemented in the Site Descriptive Modelling during the coming site investigation. The intent of the project has been to explore whether available methodology for Site Descriptive Modelling based on surface and borehole data is adequate and to identify potential needs for development and improvement in the methodology. The project has developed, with limitations in scope, a Site Descriptive Model in local scale, corresponding to the situation after completion of the Initial Site Investigations for the Laxemar area (i.e. 'version 1.2' using the vocabulary of the general execution program for the site investigations). The Site Descriptive Model should be reasonable, but should not be regarded as a 'real' model. There are limitations both in input data and in the scope of the analysis. The measured (primary) data constitute a wide range of different measurement results including data from two deep core drilled boreholes. These data both need to be checked for consistency and to be interpreted into a format more amenable for three-dimensional modelling. Examples of such evaluations are estimation of surface geology, lineament interpretation, geological single hole interpretation, hydrogeological single hole interpretation and assessment of hydrogeochemical data. Furthermore, while cross discipline interpretation is encouraged there is also a need for transparency. This means that the evaluations first are made within each discipline and after this

  14. Editorial note

    DEFF Research Database (Denmark)

    Gani, Rafiqul; Hrymak, A.; Lee, J.

    2009-01-01

    The “aims and scope” of the Computers & Chemical Engineering has been revised (see the inside cover page for the new version). We would like to make this journal the indisputable journal for the Process Systems Engineering (PSE) area as well as define the PSE agenda for the future. The principal...... components of PSE—modeling, numerical analysis, optimization, systems and control theory, computer science, and, management science will be highlighted through the published articles (full-length papers, perspective papers, review papers, short notes and letters to the editor). They will cover...... need your support and cooperation as potential reviewers. We would very much appreciate if reviewers, who accept our invitation to review, send their comments to us within the agreed deadline. We will strive to maintain and strengthen the scientific quality of Computers & Chemical Engineering and make...

  15. Methodology for geometric modelling. Presentation and administration of site descriptive models; Metodik foer geometrisk modellering. Presentation och administration av platsbeskrivande modeller

    Energy Technology Data Exchange (ETDEWEB)

    Munier, Raymond [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Hermanson, Jan [Golder Associates (Sweden)

    2001-03-01

    This report presents a methodology to construct, visualise and present geoscientific descriptive models based on data from the site investigations, which the SKB currently performs, to build an underground nuclear waste disposal facility in Sweden. It is designed for interaction with SICADA (SKB:s site characterisation database) and RVS (SKB:s Rock Visualisation System). However, the concepts of the methodology are general and can be used with other tools capable of handling 3D geometries and parameters. The descriptive model is intended to be an instrument where site investigation data from all disciplines are put together to form a comprehensive visual interpretation of the studied rock mass. The methodology has four main components: 1. Construction of a geometrical model of the interpreted main structures at the site. 2. Description of the geoscientific characteristics of the structures. 3. Description and geometrical implementation of the geometric uncertainties in the interpreted model structures. 4. Quality system for the handling of the geometrical model, its associated database and some aspects of the technical auditing. The geometrical model forms a basis for understanding the main elements and structures of the investigated site. Once the interpreted geometries are in place in the model, the system allows for adding descriptive and quantitative data to each modelled object through a system of intuitive menus. The associated database allows each geometrical object a complete quantitative description of all geoscientific disciplines, variabilities, uncertainties in interpretation and full version history. The complete geometrical model and its associated database of object descriptions are to be recorded in a central quality system. Official, new and old versions of the model are administered centrally in order to have complete quality assurance of each step in the interpretation process. The descriptive model is a cornerstone in the understanding of the

  16. Biotrans functional and technical description. Report of VIEWLS WP5, modelling studies

    International Nuclear Information System (INIS)

    Van Tilburg, X.; Egging, R.; Londo, H.M.

    2006-01-01

    The overall objectives of this project are to provide structured and clear data on the availability and performance of biofuels and to identify the possibilities and strategies towards large scale sustainable production, use and trading of biofuels for the transport sector in Europe, including Central and Eastern European Countries (CEEC). The report supplements the two other reports in the work package: 'Biofuel and Bio-energy implementation scenarios - final report of VIEWLS WP5' (2005) and 'VIEWLS modelling and analysis, technical data for biofuel production chains' (2005). This document contains a functional and technical description of the BioTrans model, accompanied by a description of the system. Section 2 contains a conceptual and functional description of the biofuel model. Section 3 describes the optimisation method in technical terms, discussing aspects like the target function and constraints used. Finally, section 4 discusses the input and output requirements for the BioTrans system

  17. Thermal Site Descriptive Model. A strategy for the model development during site investigations. Version 1.0

    International Nuclear Information System (INIS)

    Sundberg, Jan

    2003-04-01

    Site investigations are in progress for the siting of a deep repository for spent nuclear fuel. As part of the planning work, strategies are developed for site descriptive modelling regarding different disciplines, amongst them the thermal conditions. The objective of the strategy for a thermal site descriptive model is to guide the practical implementation of evaluating site specific data during the site investigations. It is understood that further development may be needed. The model describes the thermal properties and other thermal parameters of intact rock, fractures and fracture zones, and of the rock mass. The methodology is based on estimation of thermal properties of intact rock and discontinuities, using both empirical and theoretical/numerical approaches, and estimation of thermal processes using mathematical modelling. The methodology will be used and evaluated for the thermal site descriptive modelling at the Aespoe Hard Rock Laboratory

  18. A model for grain growth based on the novel description of dendrite shape

    OpenAIRE

    O. Wodo; N. Sczygiol

    2007-01-01

    We use novel description of dendritic shape in the micro solid phase growth model. The model describes evolution of both primary solid solution dendrite and eutectic that forms between arms and grains in the last stage of solidification. Obtained results show that our approach can be used in grain growth model to determine more reliable eutectic distribution. In the paper no kinetics connected with the eutectic transformation is taken into account. However, this does not affect the eutectic d...

  19. A Note on the (In)stability of Diamond's Growth Model

    DEFF Research Database (Denmark)

    Blomgren-Hansen, Niels

    2005-01-01

    equilibrium condition, S = I.This is not the case. In this note I demonstrate that Diamond's solution is unstable in a monetary market economy where households and firms make independent decisions as to how much to save and how much to invest. An increase in the rate of interest above the Diamond long...

  20. Hydrogeochemical site descriptive model - a strategy for the model development during site investigations

    Energy Technology Data Exchange (ETDEWEB)

    Smellie, John [Conterra AB, Uppsala (Sweden); Laaksoharju, Marcus [GeoPoint AB, Sollentuna (Sweden); Tullborg, Eva-Lena [Terralogica AB, Graabo (Sweden)

    2002-12-01

    In 2002, SKB commenced site characterisation investigations using deep boreholes at different sites. As an integral part of the planning work SKB has prepared a strategy to develop a Hydrogeochemical Site Descriptive Model; similar strategies have been developed for the other major geoscience disciplines. The main objectives of the Hydrogeochemical Site Descriptive Model are to describe the chemistry and distribution of the groundwater in the bedrock and overburden and the hydrogeochemical processes involved in its origin and evolution. This description is based primarily on measurements of the groundwater composition but incorporates the use of available geological and hydrogeological site descriptive models. The SKB hydrogeochemistry programme is planned to fulfil two basic requirements: 1) to provide representative and quality assured data for use as input parameter values in calculating long-term repository safety, and 2) to understand the present undisturbed hydrogeochemical conditions and how these conditions will change in the future. Parameter values for safety analysis include pH, Eh, S, SO{sub 4}, HCO{sub 3}, HPO{sub 4} and TDS (mainly cations), together with colloids, fulvic and humic acids, other organics, bacteria and nitrogen. These values will be used to characterise the groundwater environment at, above and below repository depths. In the hydrogeochemical site investigation programme the number and location of the sampling points will be constrained by: a) geology (e.g. topography, overburden types, bedrock structures etc), b) hydrogeology (e.g. groundwater recharge/discharge areas, residence times), c) reliability (e.g. undisturbed vs disturbed groundwater chemical conditions), and d) resources (e.g. number and type of samples, and also available personnel, may be restricted by budgetary and schedule concerns). Naturally a balance is required between these constraints and the scientific aims of the programme. The constraints should never

  1. Taxonomical and nomenclatural notes on Centaurea: A proposal of classification, a description of new sections and subsections, and a species list of the redefined section Centaurea

    Directory of Open Access Journals (Sweden)

    Hilpold, A.

    2014-12-01

    Full Text Available In this paper, we summarize the results of our long-date research on the genus Centaurea. The first part of the paper deals with the overall classification of the genus, which we propose to divide into three subgenera: subgenus Centaurea, subgenus Cyanus and subgenus Lopholoma. The second part of this publication gives a recopilation of the species of the redefined section Centaurea, a group that includes former sections Acrolophus (sect. Centaurea s. str., Phalolepis and Willkommia, together with taxonomical, geographical, ecological and karyological considerations. Finally, new descriptions or nomenclatural combinations are proposed to correlate nomenclature to the new classification: a new combination (sect. Acrocentron subsect. Chamaecyanus is proposed in subgenus Lopholoma; three new sections (sects. Akamantis, Cnicus, and Hyerapolitanae are described in subgenus Centaurea; two subsections (subsects. Phalolepis and Willkommia in sect. Centaurea; and three subsections (subsects. Exarata, Jacea, and Subtilis in sect. Phrygia.En este trabajo presentamos los resultados de nuestras investigaciones de larga fecha en el género Centaurea. La primera parte del trabajo trata de la clasificación del género, que proponemos dividir en tres subgéneros: subgénero Centaurea, subgénero Cyanus y subgénero Lopholoma. La segunda parte es una recopilación de las especies de la redefinida sección Centaurea, que incluye las antiguas secciones Acrolophus (sect. Centaurea s. str., Phalolepis y Willkommia, junto con consideraciones geográficas, ecológicas y cariológicas. Por último, proponemos nuevas secciones, subsecciones y combinaciones para correlacionar nomenclatura y clasificación: proponemos una nueva (sect. Acrocentron subsect. Chamaecyanus en el subgénero Lopholoma; se describen tres secciones nuevas (sects. Akamantis, Cnicus y Hyerapolitanae en el subgénero Centaurea; dos subsecciones (subsects. Phalolepis and Willkommia en la secci

  2. Wind turbine blockset in Saber. General overview and description of the models

    DEFF Research Database (Denmark)

    Iov, Florin; Timbus, Adrian Vasile; Hansen, Anca Daniela

    This report presents a new developed Saber Toolbox for wind turbine applications. This toolbox has been developed during the research project “Simulation Platform to model, optimize and design wind turbines”. The report provides a quick overview of the Saber and then explains the structure...... of this simulation package, which is different than other tools e.g. Matlab/Simulink. Then the structure of the toolbox is shown as well as the description of the developed models. The main focus here is to underline the special structure of the models, which are a mixture of Saber built-in blocks and new developed...... blocks. Since the developed models are based on Saber built-in blocks, a description of the libraries from Saber is given. Then some simulation results using the developed models are shown. Finally some general conclusions regarding this new developed Toolbox as well as some directions for future work...

  3. Wind Turbine Blockset in Saber. General Overview and Description of the Model

    DEFF Research Database (Denmark)

    Iov, Florin; Timbus, Adrian Vasile; Hansen, A. D.

    This report presents a new developed Saber Toolbox for wind turbine applications. This toolbox has been developed during the research project ?Simulation Platform to model, optimize and design wind turbines?. The report provides a quick overview of the Saber and then explains the structure...... of this simulation package, which is different than other tools e.g. Matlab/Simulink. Then the structure of the toolbox is shown as well as the description of the developed models. The main focus here is to underline the special structure of the models, which are a mixture of Saber built-in blocks and new developed...... blocks. Since the developed models are based on Saber built-in blocks, a description of the libraries from Saber is given. Then some simulation results using the developed models are shown. Finally some general conclusions regarding this new developed Toolbox as well as some directions for future work...

  4. On the applicability of jellium model to the description of alkali clusters

    DEFF Research Database (Denmark)

    Matveentsev, Anton; Lyalin, Andrey G.; Solov'yov, Ilia

    2003-01-01

    This work is devoted to the elucidation of the applicability of the jellium model to the description of alkali cluster properties. We compare the jellium model results with those derived within ab initio theoretical approaches and with experiments. On the basis of Hartree–Fock and local-density a......This work is devoted to the elucidation of the applicability of the jellium model to the description of alkali cluster properties. We compare the jellium model results with those derived within ab initio theoretical approaches and with experiments. On the basis of Hartree–Fock and local...... model are compared with the results derived from ab initio simulations of cluster electronic and ionic structure based on density functional theory and systematic post Hartree–Fock many-body perturbation theory accounting for all electrons in the system. The comparison performed demonstrates the great...

  5. Testing the methodology for site descriptive modelling. Application for the Laxemar area

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Johan [JA Streamflow AB, Aelvsjoe (Sweden); Berglund, Johan [SwedPower AB, Stockholm (Sweden); Follin, Sven [SF Geologic AB, Stockholm (Sweden); Hakami, Eva [Itasca Geomekanik AB, Stockholm (Sweden); Halvarson, Jan [Swedish Nuclear Fuel and Waste Management Co, Stockholm (Sweden); Hermanson, Jan [Golder Associates AB, Stockholm (Sweden); Laaksoharju, Marcus [Geopoint (Sweden); Rhen, Ingvar [Sweco VBB/VIAK, Stockholm (Sweden); Wahlgren, C.H. [Sveriges Geologiska Undersoekning, Uppsala (Sweden)

    2002-08-01

    A special project has been conducted where the currently available data from the Laxemar area, which is part of the Simpevarp site, have been evaluated and interpreted into a Site Descriptive Model covering: geology, hydrogeology, hydrogeochemistry and rock mechanics. Description of the surface ecosystem has been omitted, since it was re-characterised in another, parallel, project. Furthermore, there has been no evaluation of transport properties. The project is primarily a methodology test. The lessons learnt will be implemented in the Site Descriptive Modelling during the coming site investigation. The intent of the project has been to explore whether available methodology for Site Descriptive Modelling based on surface and borehole data is adequate and to identify potential needs for development and improvement in the methodology. The project has developed, with limitations in scope, a Site Descriptive Model in local scale, corresponding to the situation after completion of the Initial Site Investigations for the Laxemar area (i.e. 'version 1.2' using the vocabulary of the general execution program for the site investigations). The Site Descriptive Model should be reasonable, but should not be regarded as a 'real' model. There are limitations both in input data and in the scope of the analysis. The measured (primary) data constitute a wide range of different measurement results including data from two deep core drilled boreholes. These data both need to be checked for consistency and to be interpreted into a format more amenable for three-dimensional modelling. Examples of such evaluations are estimation of surface geology, lineament interpretation, geological single hole interpretation, hydrogeological single hole interpretation and assessment of hydrogeochemical data. Furthermore, while cross discipline interpretation is encouraged there is also a need for transparency. This means that the evaluations first are made within each discipline

  6. The Global Modeling Initiative Assessment Model: Model Description, Integration and Testing of the Transport Shell

    Energy Technology Data Exchange (ETDEWEB)

    Rotman, D.A.; Tannahill, J.R.; Kinnison, D.E.; Connell, P.S.; Bergmann, D.; Proctor, D.; Rodriquez, J.M.; Lin, S.J.; Rood, R.B.; Prather, M.J.; Rasch, P.J.; Considine, D.B.; Ramaroson, R.; Kawa, S.R.

    2000-04-25

    We describe the three dimensional global stratospheric chemistry model developed under the NASA Global Modeling Initiative (GMI) to assess the possible environmental consequences from the emissions of a fleet of proposed high speed civil transport aircraft. This model was developed through a unique collaboration of the members of the GMI team. Team members provided computational modules representing various physical and chemical processes, and analysis of simulation results through extensive comparison to observation. The team members' modules were integrated within a computational framework that allowed transportability and simulations on massively parallel computers. A unique aspect of this model framework is the ability to interchange and intercompare different submodules to assess the sensitivity of numerical algorithms and model assumptions to simulation results. In this paper, we discuss the important attributes of the GMI effort, describe the GMI model computational framework and the numerical modules representing physical and chemical processes. As an application of the concept, we illustrate an analysis of the impact of advection algorithms on the dispersion of a NO{sub y}-like source in the stratosphere which mimics that of a fleet of commercial supersonic transports (High-Speed Civil Transport (HSCT)) flying between 17 and 20 kilometers.

  7. A taxonomic review of the Selenophori group (Coleoptera, Carabidae, Harpalini in the West Indies, with descriptions of new species and notes about classification and biogeography

    Directory of Open Access Journals (Sweden)

    Danny Shpeley

    2017-08-01

    Full Text Available Primarily a taxonomic review of the West Indian elements of the selenophorine Harpalini, this paper includes a classification, a key, descriptions and illustrations of taxa, re-rankings, and new synonymies. In total, 45 species and subspecies are treated, six of which are described as new. A new genus and new species are as follows, with type localities in parentheses: Paraulacoryssus gen. n., (type species Selenophorus puertoricensis Mutchler, 1934; Neodiachipteryx davidsoni sp. n., (Zamba, Dominican Republic; Selenophorus spinosus sp. n., seriatoporus species group (Benjamin Constant, state of Amazonas, Brazil; Selenophorus obtusoides sp. n., parumpunctatus species group (near Soroa, Pinar del Rio Province, Cuba; Selenophorus iviei sp. n., nonseriatus species group (Big River, Montserrat, 16°45.719N', 62°11.335W'; Selenophorus irec sp. n., nonseriatus species group (Vernou, Guadeloupe, Lesser Antilles; and Selenophorus fabricii sp. n., opalinus species group (Cabo Rojo, Pedernales Province, Dominican Republic. This last species was misidentified as Selenophorus integer (Fabricius. In turn, that species was misidentified as Selenophorus chalybeus Dejean. Selenophorus chalybeus Dejean is a junior synonym of Selenophorus integer Fabricius, syn. n.; and Isopleurus macleayi Kirby is a junior synonym of Selenophorus pyritosus Dejean, syn. n. Biogeographically, log of land area plotted against log of number of species shows that the equilibrium theory of biogeography applies to the West Indian selenophorine fauna. Taxonomically, the selenophorine taxa of the West Indies are arranged in eight genera. The 30 species/subspecies of Selenophorus (sensu stricto are arranged in 10 species groups. Geographically, the major sources of the selenophorines are the Bahamas, the Greater Antilles and Lesser Antilles. The West Indian islands probably have been invaded by 26 taxa. Of the currently extant taxa, 11 are classified as immigrant, meaning that they are

  8. Descriptive and predictive evaluation of high resolution Markov chain precipitation models

    DEFF Research Database (Denmark)

    Sørup, Hjalte Jomo Danielsen; Madsen, Henrik; Arnbjerg-Nielsen, Karsten

    2012-01-01

    . Continuous modelling of the Markov process proved attractive because of a marked decrease in the number of parameters. Inclusion of seasonality into the continuous Markov chain model proved difficult. Monte Carlo simulations with the models show that it is very difficult for all the model formulations......A time series of tipping bucket recordings of very high temporal and volumetric resolution precipitation is modelled using Markov chain models. Both first and second‐order Markov models as well as seasonal and diurnal models are investigated and evaluated using likelihood based techniques....... The first‐order Markov model seems to capture most of the properties of precipitation, but inclusion of seasonal and diurnal variation improves the model. Including a second‐order Markov Chain component does improve the descriptive capabilities of the model, but is very expensive in its parameter use...

  9. A Short Introduction to Model Selection, Kolmogorov Complexity and Minimum Description Length (MDL)

    NARCIS (Netherlands)

    Nannen, Volker

    2010-01-01

    The concept of overtting in model selection is explained and demon- strated. After providing some background information on information theory and Kolmogorov complexity, we provide a short explanation of Minimum Description Length and error minimization. We conclude with a discussion of the typical

  10. Application of the Rangeland Hydrology and Erosion Model to Ecological Site Descriptions and Management

    Science.gov (United States)

    The utility of Ecological Site Descriptions (ESDs) and State-and-Transition Models (STMs) concepts in guiding rangeland management hinges on their ability to accurately describe and predict community dynamics and the associated consequences. For many rangeland ecosystems, plant community dynamics ar...

  11. The Role of Visuo-Spatial Abilities in Recall of Spatial Descriptions: A Mediation Model

    Science.gov (United States)

    Meneghetti, Chiara; De Beni, Rossana; Pazzaglia, Francesca; Gyselinck, Valerie

    2011-01-01

    This research investigates how visuo-spatial abilities (such as mental rotation--MR--and visuo-spatial working memory--VSWM--) work together to influence the recall of environmental descriptions. We tested a mediation model in which VSWM was assumed to mediate the relationship between MR and spatial text recall. First, 120 participants were…

  12. Discrepancies between Normative and Descriptive Models of Decision Making and the Understanding/Acceptance Principle.

    Science.gov (United States)

    Stanovich, Keith E.; West, Richard F.

    1999-01-01

    Examines tasks from the heuristics and biases literature in light of the understanding/acceptance principle of P. Slovic and A. Tversky (1974). Shows how the variation and instability of responses can be analyzed to yield inferences about why descriptive and normative models of human reasoning and decision making sometimes do not coincide.…

  13. The Relationship between BIBFRAME and OCLC's Linked-Data Model of Bibliographic Description: A Working Paper

    Science.gov (United States)

    Godby, Carol Jean

    2013-01-01

    This document describes a proposed alignment between BIBFRAME (Bibliographic Framework) and a model being explored by the Online Computer Library Center (OCLC) with extensions proposed by the Schema Bib Extend project, a Worldwide Web Consortium sponsored (W3C-sponsored) community group tasked with enhancing Schema.org to the description of…

  14. Musical note

    OpenAIRE

    Martin, Gregory

    2016-01-01

    In music, the term note has two primary meanings: A sign used in musical notation to represent the relative duration and pitch of a sound (♪, ♫); A pitched sound itself. Notes are the "atoms" of much written music: discretizations of musical phenomena that facilitate performance, comprehension, and analysis. http://musicnotes.pp.ua/

  15. Documentation for Grants Equal to Tax model: Volume 1, Technical description

    International Nuclear Information System (INIS)

    1986-01-01

    A computerized model, the Grants Equal to Tax (GETT) model, was developed to assist in evaluating the amount of federal grant monies that would go to state and local jurisdictions under the provisions outlined in the Nuclear Waste Policy Act of 1982. The GETT model is capable of forecasting the amount of tax liability associated with all property owned and all activities undertaken by the US Department of Energy (DOE) in site characterization and repository development. The GETT program is a user-friendly, menu-driven model developed using dBASE III/trademark/, a relational data base management system. The data base for GETT consists primarily of eight separate dBASE III/trademark/ files corresponding to each of the eight taxes levied by state and local jurisdictions on business property and activity. Additional smaller files help to control model inputs and reporting options. Volume 1 of the GETT model documentation is a technical description of the program and its capabilities providing (1) descriptions of the data management system and its procedures; (2) formulas for calculating taxes (illustrated with flow charts); (3) descriptions of tax data base variables for the Deaf Smith County, Texas, Richton Dome, Mississippi, and Davis Canyon, Utah, salt sites; and (4) data inputs for the GETT model. 10 refs., 18 figs., 3 tabs

  16. Validation of coastal oceanographic models at Forsmark. Site descriptive modelling SDM-Site Forsmark

    Energy Technology Data Exchange (ETDEWEB)

    Engqvist, Anders (A och I Engqvist Konsult HB, Vaxholm (SE)); Andrejev, Oleg (Finnish Inst. of Marine Research, Helsinki (FI))

    2008-01-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterisation at two different locations, the Forsmark and the Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The characterisation work is divided into an initial site investigation phase and a complete site investigation phase. In this context, the water exchange of the coastal zone is one link of the chain of possible nuclide transport mechanisms that must be assessed in the site description of potential repository areas. For the purpose of validating the pair of nested 3D-models employed to simulate the water exchange in the near-shore coastal zone in the Forsmark area, an encompassing measurement program entailing six stations has been performed. The design of this program was to first assess to what degree the forcing of the fine resolution (FR) model of the Forsmark study area at its interfacial boundary to the coarse resolution (CR) model of the entire Baltic was reproduced. In addition to this scrutiny it is of particular interest how the time-varying density-determining properties, salinity and temperature, at the borders are propagated into the FR-domain, since this corresponds to the most efficient mode of water exchange. An important part of the validation process has been to carefully evaluate which measurement data that can be considered reliable. The result was that several periods of foremost near-surface salinity data had to be discarded due to growth of algae on the conductivity sensors. Lack of thorough absolute calibration of the salinity meters also necessitates dismissal of measurement data. Relative the assessed data that can be accepted as adequate, the outcome of the validation can be summarized in five points: (i) The surface-most salinity of the CR-model drifts downward a little less than one practical salinity unit (psu) per year, requiring that the ensuing correlation analysis be subdivided into periods of a

  17. Validation of coastal oceanographic models at Forsmark. Site descriptive modelling SDM-Site Forsmark

    International Nuclear Information System (INIS)

    Engqvist, Anders; Andrejev, Oleg

    2008-01-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterisation at two different locations, the Forsmark and the Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The characterisation work is divided into an initial site investigation phase and a complete site investigation phase. In this context, the water exchange of the coastal zone is one link of the chain of possible nuclide transport mechanisms that must be assessed in the site description of potential repository areas. For the purpose of validating the pair of nested 3D-models employed to simulate the water exchange in the near-shore coastal zone in the Forsmark area, an encompassing measurement program entailing six stations has been performed. The design of this program was to first assess to what degree the forcing of the fine resolution (FR) model of the Forsmark study area at its interfacial boundary to the coarse resolution (CR) model of the entire Baltic was reproduced. In addition to this scrutiny it is of particular interest how the time-varying density-determining properties, salinity and temperature, at the borders are propagated into the FR-domain, since this corresponds to the most efficient mode of water exchange. An important part of the validation process has been to carefully evaluate which measurement data that can be considered reliable. The result was that several periods of foremost near-surface salinity data had to be discarded due to growth of algae on the conductivity sensors. Lack of thorough absolute calibration of the salinity meters also necessitates dismissal of measurement data. Relative the assessed data that can be accepted as adequate, the outcome of the validation can be summarized in five points: (i) The surface-most salinity of the CR-model drifts downward a little less than one practical salinity unit (psu) per year, requiring that the ensuing correlation analysis be subdivided into periods of a

  18. On correctness of the two-level model for description of active medium in quantum plasmonics

    Science.gov (United States)

    Chubchev, E. D.; Andrianov, E. S.; Pukhov, A. A.; Vinogradov, A. P.; Lisyansky, A. A.

    2017-09-01

    In order to simplify the theoretical description of spasers, a gain medium is commonly represented by a two-level system (TLS). A realistic model, however, should have four levels. By using the Lindblad equations we develop a description of such a system and show that depending on ratios of the Rabi frequency and the rate of relaxation of the polarization, a four-level system (FLS) may be reduced to one of two effective TLSs that reproduce the key properties of a FLS.

  19. A model for grain growth based on the novel description of dendrite shape

    Directory of Open Access Journals (Sweden)

    O. Wodo

    2007-12-01

    Full Text Available We use novel description of dendritic shape in the micro solid phase growth model. The model describes evolution of both primary solid solution dendrite and eutectic that forms between arms and grains in the last stage of solidification. Obtained results show that our approach can be used in grain growth model to determine more reliable eutectic distribution. In the paper no kinetics connected with the eutectic transformation is taken into account. However, this does not affect the eutectic distribution because at the beginning of eutectic reaction all liquid phase was assumed to fully transform into eutectic. Results for solid phase growth model based on this description are presented. The obtained results of eutectic distribution are especially important in the hypoeutectic alloy solidification case, where the eutectic grains grow between formed solid solution grains. Thus, the distribution of solid solution grain becomes crucial due to its influence on the delay in solid fraction increase of eutectic grains.

  20. Classical mathematical models for description and prediction of experimental tumor growth.

    Science.gov (United States)

    Benzekry, Sébastien; Lamont, Clare; Beheshti, Afshin; Tracz, Amanda; Ebos, John M L; Hlatky, Lynn; Hahnfeldt, Philip

    2014-08-01

    Despite internal complexity, tumor growth kinetics follow relatively simple laws that can be expressed as mathematical models. To explore this further, quantitative analysis of the most classical of these were performed. The models were assessed against data from two in vivo experimental systems: an ectopic syngeneic tumor (Lewis lung carcinoma) and an orthotopically xenografted human breast carcinoma. The goals were threefold: 1) to determine a statistical model for description of the measurement error, 2) to establish the descriptive power of each model, using several goodness-of-fit metrics and a study of parametric identifiability, and 3) to assess the models' ability to forecast future tumor growth. The models included in the study comprised the exponential, exponential-linear, power law, Gompertz, logistic, generalized logistic, von Bertalanffy and a model with dynamic carrying capacity. For the breast data, the dynamics were best captured by the Gompertz and exponential-linear models. The latter also exhibited the highest predictive power, with excellent prediction scores (≥80%) extending out as far as 12 days in the future. For the lung data, the Gompertz and power law models provided the most parsimonious and parametrically identifiable description. However, not one of the models was able to achieve a substantial prediction rate (≥70%) beyond the next day data point. In this context, adjunction of a priori information on the parameter distribution led to considerable improvement. For instance, forecast success rates went from 14.9% to 62.7% when using the power law model to predict the full future tumor growth curves, using just three data points. These results not only have important implications for biological theories of tumor growth and the use of mathematical modeling in preclinical anti-cancer drug investigations, but also may assist in defining how mathematical models could serve as potential prognostic tools in the clinic.

  1. Classical mathematical models for description and prediction of experimental tumor growth.

    Directory of Open Access Journals (Sweden)

    Sébastien Benzekry

    2014-08-01

    Full Text Available Despite internal complexity, tumor growth kinetics follow relatively simple laws that can be expressed as mathematical models. To explore this further, quantitative analysis of the most classical of these were performed. The models were assessed against data from two in vivo experimental systems: an ectopic syngeneic tumor (Lewis lung carcinoma and an orthotopically xenografted human breast carcinoma. The goals were threefold: 1 to determine a statistical model for description of the measurement error, 2 to establish the descriptive power of each model, using several goodness-of-fit metrics and a study of parametric identifiability, and 3 to assess the models' ability to forecast future tumor growth. The models included in the study comprised the exponential, exponential-linear, power law, Gompertz, logistic, generalized logistic, von Bertalanffy and a model with dynamic carrying capacity. For the breast data, the dynamics were best captured by the Gompertz and exponential-linear models. The latter also exhibited the highest predictive power, with excellent prediction scores (≥80% extending out as far as 12 days in the future. For the lung data, the Gompertz and power law models provided the most parsimonious and parametrically identifiable description. However, not one of the models was able to achieve a substantial prediction rate (≥70% beyond the next day data point. In this context, adjunction of a priori information on the parameter distribution led to considerable improvement. For instance, forecast success rates went from 14.9% to 62.7% when using the power law model to predict the full future tumor growth curves, using just three data points. These results not only have important implications for biological theories of tumor growth and the use of mathematical modeling in preclinical anti-cancer drug investigations, but also may assist in defining how mathematical models could serve as potential prognostic tools in the clinic.

  2. Large regional groundwater modeling - a sensitivity study of some selected conceptual descriptions and simplifications

    International Nuclear Information System (INIS)

    Ericsson, Lars O.; Holmen, Johan

    2010-12-01

    The primary aim of this report is: - To present a supplementary, in-depth evaluation of certain conceptual simplifications, descriptions and model uncertainties in conjunction with regional groundwater simulation, which in the first instance refer to model depth, topography, groundwater table level and boundary conditions. Implementation was based on geo-scientifically available data compilations from the Smaaland region but different conceptual assumptions have been analysed

  3. A Descriptive Model of Robot Team and the Dynamic Evolution of Robot Team Cooperation

    OpenAIRE

    Li, Shu-qin; Shuai, Lan; Cheng, Xian-yi; Tang, Zhen-min; Yang, Jing-yu

    2006-01-01

    At present, the research on robot team cooperation is still in qualitative analysis phase and lacks the description model that can quantitatively describe the dynamical evolution of team cooperative relationships with constantly changeable task demand in Multi-robot field. First this paper whole and static describes organization model HWROM of robot team, then uses Markov course and Bayesian theorem for reference, dynamical describes the team cooperative relationships building. Finally from c...

  4. System Design Description and Requirements for Modeling the Off-Gas Systems for Fuel Recycling Facilities

    Energy Technology Data Exchange (ETDEWEB)

    Daryl R. Haefner; Jack D. Law; Troy J. Tranter

    2010-08-01

    This document provides descriptions of the off-gases evolved during spent nuclear fuel processing and the systems used to capture the gases of concern. Two reprocessing techniques are discussed, namely aqueous separations and electrochemical (pyrochemical) processing. The unit operations associated with each process are described in enough detail so that computer models to mimic their behavior can be developed. The document also lists the general requirements for the desired computer models.

  5. LINDOZ model for Finland environment: Model description and evaluation of model performance

    International Nuclear Information System (INIS)

    Galeriu, D.; Apostoaie, A.I.; Mocanu, N.; Paunescu, N.

    1996-01-01

    LINDOZ model was developed as a realistic assessment tool for radioactive contamination of the environment. It was designed to produce estimates for the concentration of the pollutant in different compartments of the terrestrial ecosystem (soil, vegetation, animal tissue, and animal products), and to evaluate human exposure to the contaminant (concentration in whole human body, and dose to humans) from inhalation, ingestion and external irradiation. The user can apply LINDOZ for both routine and accidental type of releases. 2 figs, 2 tabs

  6. META-SITUATIONAL MODELING IN DESCRIPTION OF SOCIAL AND ECONOMIC PROCESSES IN EDUCATION

    Directory of Open Access Journals (Sweden)

    K. A. Konev

    2014-05-01

    Full Text Available The paper deals with the development of meta-situational modeling concept in the field of formalized description of nondeterministic socio-economic processes in relation to education. The goal of the paper is to increase the efficiency and optimization of decision-making procedure, in general, and informational support for formalized processes, in particular. To achieve this goal, it is proposed to introduce the concept and methodology of modeling as meta-situational integration situation (event and ontological (semantic approaches. It is assumed that the two-level description of the situation (at declarative and descriptive levels will give the possibility for varying levels of abstraction in relation to process and get access to data and knowledge about it at that stage, when it is objectively necessary. Another obvious advantage of the proposed approach is simplicity of implementation due to a widespread situation and ontological approaches and, consequently, their formalization methods (mathematical apparatus and instrumental software implementation (programming languages, display formats, etc.. To verify the efficiency of the proposed meta-situational approach, a typical example of weakly formalized situations is considered - one of the options assessment tools traditionally used in education. Both components of the process are described in detail: situational one, specifying stepwise development procedures and ontological, characterizing taxonomic aspect of the process. The order of a formalized description for meta-situational model structure based on data representation formats similar to XML (category "Semantic Web" is determined.

  7. Description of relativistic nucleus-nucleus collisions in a field theoretical model

    International Nuclear Information System (INIS)

    Theis, J.

    1984-08-01

    For the purpose of studying high energy heavy-ion collisions a self-consistent theory of relativistic nuclear fluid-dynamics coupled to classical meson fields is developed. The essential difference to the conventional fluid dynamic description arises from the coupling of meson fields to the nuclear fluid and from the non-linear relation for the effective baryon mass leading to a relativistic self-consistent description for the nuclear equation of state. The effects of different equations of state resulting from linear and nonlinear mean field approaches are studied in the event-by-event kinetic flow analysis of heavy ion collisions. The predictions for the symmetrical system Nb(Esub(Lab)=400 MeV/N)Nb are in good agreement with the experimental 4π-data. Investigating the phase structure in the linear mean field approach a phase transition occuring at Tapprox.=200 MeV for chemical potential μ=0 was found in this model. This transition is similar to recent QCD predictions. The model indicates a further phase transition at Tapprox.=20 MeV (baryon fluid to gas). There is, however, no correct description of the compressibility of nuclear matter in the linear mean field model. The extension to nonlinear scalar meson interaction allows for a correct description of the bulk properties of nuclear matter. It was found though that the phase transition is always present for reasonable values of the coupling constants. (orig./HSI) [de

  8. NONLINEAR MODELS FOR DESCRIPTION OF CACAO FRUIT GROWTH WITH ASSUMPTION VIOLATIONS

    Directory of Open Access Journals (Sweden)

    JOEL AUGUSTO MUNIZ

    2017-01-01

    Full Text Available Cacao (Theobroma cacao L. is an important fruit in the Brazilian economy, which is mainly cultivated in the southern State of Bahia. The optimal stage for harvesting is a major factor for fruit quality and the knowledge on its growth curves can help, especially in identifying the ideal maturation stage for harvesting. Nonlinear regression models have been widely used for description of growth curves. However, several studies in this subject do not consider the residual analysis, the existence of a possible dependence between longitudinal observations, or the sample variance heterogeneity, compromising the modeling quality. The objective of this work was to compare the fit of nonlinear regression models, considering residual analysis and assumption violations, in the description of the cacao (clone Sial-105 fruit growth. The data evaluated were extracted from Brito and Silva (1983, who conducted the experiment in the Cacao Research Center, Ilheus, State of Bahia. The variables fruit length, diameter and volume as a function of fruit age were studied. The use of weighting and incorporation of residual dependencies was efficient, since the modeling became more consistent, improving the model fit. Considering the first-order autoregressive structure, when needed, leads to significant reduction in the residual standard deviation, making the estimates more reliable. The Logistic model was the most efficient for the description of the cacao fruit growth.

  9. "Technical note. Harmonization of the multi-scale multi-model activities HTAP, AQMEII and MICS-Asia: simulations, emission inventories, boundary conditions and output formats." For submission to ACP Special Issue on "Global and regional assessment of intercontinental transport of air pollution: results from HTAP, AQMEII and MICS"

    Science.gov (United States)

    The ACP Special Issue is being organized to draw together analysis of a set of cooperative modeling experiments (referred to as HTAP2). The purpose of this technical note is to provide a common description of the experimental design and set up for HTAP2 that can be referred to b...

  10. Description of the power plant model BWR-plasim outlined for the Barsebaeck 2 plant

    International Nuclear Information System (INIS)

    Christensen, P. la Cour.

    1979-08-01

    A description is given of a BWR power plant model outlined for the Barsebaeck 2 plant with data placed at our disposal by the Swedish Power Company Sydkraft A/B. The basic operations are derived and simplifications discussed. The model is implemented with a simulation system DYSYS which assures reliable solutions and easy programming. Emphasis has been placed on the models versatility and flexibility so new features are easy to incorporate. The model may be used for transient calculations for both normal plant conditions and for abnormal occurences as well as for control system studies. (author)

  11. Validation of coastal oceanographic models at Laxemar-Simpevarp. Site descriptive modelling SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    Engqvist, Anders (A och I Engqvist Konsult HB, Vaxholm (SE)); Andrejev, Oleg (Finnish Inst. of Marine Research, Helsinki (FI))

    2008-12-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterization at two different locations, the Forsmark and the Laxemar-Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The characterization work is divided into an initial site investigation phase and a complete site investigation phase. In this context, the water exchange of the coastal zone is one link of the chain of possible nuclide transport mechanisms that must be assessed in the site description of potential repository areas. For the purpose of validating the pair of nested 3D-models and the coupled discrete basin (CDB-) model employed to simulate the water exchange in the near-shore coastal zone in the Laxemar-Simpevarp area, an encompassing measurement program entailing data from six stations (of which two are close) has been performed. The design of this program was to first assess to what degree the forcing of the fine resolution (FR-) model of the Laxemar- Simpevarp study area at its interfacial boundary to the coarse resolution (CR-) model of the entire Baltic was reproduced. In addition to this, it is of particular interest how the time-varying density-determining properties, salinity and temperature, at the borders are propagated into the FR-domain and further influence the water exchange with the interior, more secluded, basins. An important part of the validation process has been to carefully evaluate which measurement data that can be considered reliable. The result was that some periods of foremost near-surface salinity data had to be discarded due to growth of algae on the conductivity sensors. Interference with ship traffic and lack of absolute calibration of the salinity meters necessitated dismissal of measurement data too. In this study so-called Mesan data have been consistently used for the meteorological forcing of the 3D-models. Relative the assessed data that can be accepted as adequate, the outcome of the

  12. Validation of coastal oceanographic models at Laxemar-Simpevarp. Site descriptive modelling SDM-Site Laxemar

    International Nuclear Information System (INIS)

    Engqvist, Anders; Andrejev, Oleg

    2008-12-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterization at two different locations, the Forsmark and the Laxemar-Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The characterization work is divided into an initial site investigation phase and a complete site investigation phase. In this context, the water exchange of the coastal zone is one link of the chain of possible nuclide transport mechanisms that must be assessed in the site description of potential repository areas. For the purpose of validating the pair of nested 3D-models and the coupled discrete basin (CDB-) model employed to simulate the water exchange in the near-shore coastal zone in the Laxemar-Simpevarp area, an encompassing measurement program entailing data from six stations (of which two are close) has been performed. The design of this program was to first assess to what degree the forcing of the fine resolution (FR-) model of the Laxemar- Simpevarp study area at its interfacial boundary to the coarse resolution (CR-) model of the entire Baltic was reproduced. In addition to this, it is of particular interest how the time-varying density-determining properties, salinity and temperature, at the borders are propagated into the FR-domain and further influence the water exchange with the interior, more secluded, basins. An important part of the validation process has been to carefully evaluate which measurement data that can be considered reliable. The result was that some periods of foremost near-surface salinity data had to be discarded due to growth of algae on the conductivity sensors. Interference with ship traffic and lack of absolute calibration of the salinity meters necessitated dismissal of measurement data too. In this study so-called Mesan data have been consistently used for the meteorological forcing of the 3D-models. Relative the assessed data that can be accepted as adequate, the outcome of the

  13. Simulation model for wind energy storage systems. Volume III. Program descriptions. [SIMWEST CODE

    Energy Technology Data Exchange (ETDEWEB)

    Warren, A.W.; Edsinger, R.W.; Burroughs, J.D.

    1977-08-01

    The effort developed a comprehensive computer program for the modeling of wind energy/storage systems utilizing any combination of five types of storage (pumped hydro, battery, thermal, flywheel and pneumatic). An acronym for the program is SIMWEST (Simulation Model for Wind Energy Storage). The level of detail of SIMWEST is consistent with a role of evaluating the economic feasibility as well as the general performance of wind energy systems. The software package consists of two basic programs and a library of system, environmental, and load components. Volume III, the SIMWEST program description contains program descriptions, flow charts and program listings for the SIMWEST Model Generation Program, the Simulation program, the File Maintenance program and the Printer Plotter program. Volume III generally would not be required by SIMWEST user.

  14. The Colonization of Private Relationships by the Economic Discourse: A Critic to Descriptive Models of Company

    Directory of Open Access Journals (Sweden)

    Sergio Marcos Carvalho de Avila Negri

    2015-12-01

    Full Text Available Through the reconstructive method of approach and by adopting the communicative rationality habermasian as epistemological framework, this paper discusses the process of colonization of private relations by economic discourse in the corporate field. It examines, in particular, descriptive models of business relationships, as the nexus of contracts theory and dispute resolution forms as the "default rule" and the "hypothetical bargain." With a content analysis of these models, it investigates the hypothesis that there are non-problematized normative claims in the descriptions of business relationships and decision-making in the corporate field, such as specialization and efficiency while rationality parameters. It addresses procedural and substantive objections to the approached models.

  15. Improved object optimal synthetic description, modeling, learning, and discrimination by GEOGINE computational kernel

    Science.gov (United States)

    Fiorini, Rodolfo A.; Dacquino, Gianfranco

    2005-03-01

    GEOGINE (GEOmetrical enGINE), a state-of-the-art OMG (Ontological Model Generator) based on n-D Tensor Invariants for n-Dimensional shape/texture optimal synthetic representation, description and learning, was presented in previous conferences elsewhere recently. Improved computational algorithms based on the computational invariant theory of finite groups in Euclidean space and a demo application is presented. Progressive model automatic generation is discussed. GEOGINE can be used as an efficient computational kernel for fast reliable application development and delivery in advanced biomedical engineering, biometric, intelligent computing, target recognition, content image retrieval, data mining technological areas mainly. Ontology can be regarded as a logical theory accounting for the intended meaning of a formal dictionary, i.e., its ontological commitment to a particular conceptualization of the world object. According to this approach, "n-D Tensor Calculus" can be considered a "Formal Language" to reliably compute optimized "n-Dimensional Tensor Invariants" as specific object "invariant parameter and attribute words" for automated n-Dimensional shape/texture optimal synthetic object description by incremental model generation. The class of those "invariant parameter and attribute words" can be thought as a specific "Formal Vocabulary" learned from a "Generalized Formal Dictionary" of the "Computational Tensor Invariants" language. Even object chromatic attributes can be effectively and reliably computed from object geometric parameters into robust colour shape invariant characteristics. As a matter of fact, any highly sophisticated application needing effective, robust object geometric/colour invariant attribute capture and parameterization features, for reliable automated object learning and discrimination can deeply benefit from GEOGINE progressive automated model generation computational kernel performance. Main operational advantages over previous

  16. Safety Note

    CERN Multimedia

    SC Secretariat

    2004-01-01

    Please note that the Safety Note no 29 (NS 29) entitled 'Fire Prevention for Insulating Core (Sandwich) Panel Structures for Inside Use Guidelines for Selection, Installation and Use' is available on the web at the following url: https://edms.cern.ch/document/475438/LAST_RELEASED Paper copies can also be obtained from the SC Unit secretariat, e-mail : sc.secretariat@cern.ch SC Secretariat

  17. Notes on Piezoelectricity

    Energy Technology Data Exchange (ETDEWEB)

    Redondo, Antonio [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-02-03

    These notes provide a pedagogical discussion of the physics of piezoelectricity. The exposition starts with a brief analysis of the classical (continuum) theory of piezoelectric phenomena in solids. The main subject of the notes is, however, a quantum mechanical analysis. We first derive the Frohlich Hamiltonian as part of the description of the electron-phonon interaction. The results of this analysis are then employed to derive the equations of piezoelectricity. A couple of examples with the zinc blende and and wurtzite structures are presented at the end

  18. Description langugage for the modelling and analysis of temporal change of instrumentation and control system structures

    International Nuclear Information System (INIS)

    Goering, Markus Heinrich

    2013-01-01

    comprehensive requirements for the superposition of event sequences and failure combinations. For this reason, the synthesis of a description language, under consideration of the aforementioned challenges, is necessary; supplemented by a method utilising the description language for efficient engineering and I and C design analysis. Due to the abstraction of AutomationML as a meta-metamodel, it is utilised as the basis for the description language synthesis, however AutomationML also does not fulfil all target criteria. On one hand, the description language synthesis is based on the syntax of AutomationML, and on the other hand, the semantics are determined by the context of computer-based I and C in nuclear power plants and structured utilising the general product, function, and location structures of standard IEC 81346. When modelling I and C failure combinations in addition to event sequences, the description language is completed by an event structure, for which CDL is utilised for the conceptualisation and the formalisation is accomplished with PSL. The PSL formalisation allows for implementing the description language in a knowledge-based system, so that automated engineering is enabled. The I and C modelling, as part of the method, is embedded in the IEC 61513 I and C safety life-cycle and is realised in two steps. Consequently, the I and C design can be analysed at both plant and system level. For the I and C design analysis the concepts of the D3-analysis, FTA, ETA, and FMEA are combined. The thesis is concluded with an example applying the description language and method to the modernisation of a reactor protection system; this illustrates the validation of the overall concept developed in this thesis.

  19. Description langugage for the modelling and analysis of temporal change of instrumentation and control system structures

    Energy Technology Data Exchange (ETDEWEB)

    Goering, Markus Heinrich

    2013-10-25

    comprehensive requirements for the superposition of event sequences and failure combinations. For this reason, the synthesis of a description language, under consideration of the aforementioned challenges, is necessary; supplemented by a method utilising the description language for efficient engineering and I and C design analysis. Due to the abstraction of AutomationML as a meta-metamodel, it is utilised as the basis for the description language synthesis, however AutomationML also does not fulfil all target criteria. On one hand, the description language synthesis is based on the syntax of AutomationML, and on the other hand, the semantics are determined by the context of computer-based I and C in nuclear power plants and structured utilising the general product, function, and location structures of standard IEC 81346. When modelling I and C failure combinations in addition to event sequences, the description language is completed by an event structure, for which CDL is utilised for the conceptualisation and the formalisation is accomplished with PSL. The PSL formalisation allows for implementing the description language in a knowledge-based system, so that automated engineering is enabled. The I and C modelling, as part of the method, is embedded in the IEC 61513 I and C safety life-cycle and is realised in two steps. Consequently, the I and C design can be analysed at both plant and system level. For the I and C design analysis the concepts of the D3-analysis, FTA, ETA, and FMEA are combined. The thesis is concluded with an example applying the description language and method to the modernisation of a reactor protection system; this illustrates the validation of the overall concept developed in this thesis.

  20. Full-range stress–strain behaviour of contemporary pipeline steels: Part I. Model description

    International Nuclear Information System (INIS)

    Hertelé, Stijn; De Waele, Wim; Denys, Rudi; Verstraete, Matthias

    2012-01-01

    The stress–strain relationship of contemporary pipeline steels is often approximated by the relatively simple Ramberg–Osgood equation. However, these steels often show a more complex post-yield behaviour, which can result in significant errors. To address this limitation for cases where an accurate full-range description is needed, the authors developed a new ‘UGent’ stress–strain model which has two independent strain-hardening exponents. This paper compares the UGent model with the Ramberg–Osgood model for a wide range of experimental data, by means of least-squares curve fitting. A significant improvement is observed for contemporary pipeline steels with a yield-to-tensile ratio above 0.80. These steels typically exhibit two distinct stages of strain hardening. In contrast to the Ramberg–Osgood model, both stages are successfully described by the UGent model. A companion paper (Part II) discusses how to find appropriate model parameter values for the UGent model. - Highlights: ► Contemporary pipeline steels often show two strain-hardening stages. ► This phenomenon is progressively apparent as Y/T exceeds 0.80. ► Both stages cannot be simultaneously described by the Ramberg–Osgood model. ► A new “UGent” model provides significantly better descriptions. ► The improvement becomes more pronounced as Y/T increases.

  1. Wind Turbine Blockset in Saber. General Overview and Description of the Model

    DEFF Research Database (Denmark)

    Iov, Florin; Timbus, Adrian Vasile; Hansen, A. D.

    This report presents a new developed Saber Toolbox for wind turbine applications. This toolbox has been developed during the research project ?Simulation Platform to model, optimize and design wind turbines?. The report provides a quick overview of the Saber and then explains the structure...... of this simulation package, which is different than other tools e.g. Matlab/Simulink. Then the structure of the toolbox is shown as well as the description of the developed models. The main focus here is to underline the special structure of the models, which are a mixture of Saber built-in blocks and new developed...

  2. EBT time-dependent point model code: description and user's guide

    International Nuclear Information System (INIS)

    Roberts, J.F.; Uckan, N.A.

    1977-07-01

    A D-T time-dependent point model has been developed to assess the energy balance in an EBT reactor plasma. Flexibility is retained in the model to permit more recent data to be incorporated as they become available from the theoretical and experimental studies. This report includes the physics models involved, the program logic, and a description of the variables and routines used. All the files necessary for execution are listed, and the code, including a post-execution plotting routine, is discussed

  3. [DESCRIPTION AND PRESENTATION OF THE RESULTS OF ELECTROENCEPHALOGRAM PROCESSING USING AN INFORMATION MODEL].

    Science.gov (United States)

    Myznikov, I L; Nabokov, N L; Rogovanov, D Yu; Khankevich, Yu R

    2016-01-01

    The paper proposes to apply the informational modeling of correlation matrix developed by I.L. Myznikov in early 1990s in neurophysiological investigations, such as electroencephalogram recording and analysis, coherence description of signals from electrodes on the head surface. The authors demonstrate information models built using the data from studies of inert gas inhalation by healthy human subjects. In the opinion of the authors, information models provide an opportunity to describe physiological processes with a high level of generalization. The procedure of presenting the EEG results holds great promise for the broad application.

  4. Active Vertex Model for cell-resolution description of epithelial tissue mechanics.

    Directory of Open Access Journals (Sweden)

    Daniel L Barton

    2017-06-01

    Full Text Available We introduce an Active Vertex Model (AVM for cell-resolution studies of the mechanics of confluent epithelial tissues consisting of tens of thousands of cells, with a level of detail inaccessible to similar methods. The AVM combines the Vertex Model for confluent epithelial tissues with active matter dynamics. This introduces a natural description of the cell motion and accounts for motion patterns observed on multiple scales. Furthermore, cell contacts are generated dynamically from positions of cell centres. This not only enables efficient numerical implementation, but provides a natural description of the T1 transition events responsible for local tissue rearrangements. The AVM also includes cell alignment, cell-specific mechanical properties, cell growth, division and apoptosis. In addition, the AVM introduces a flexible, dynamically changing boundary of the epithelial sheet allowing for studies of phenomena such as the fingering instability or wound healing. We illustrate these capabilities with a number of case studies.

  5. Active Vertex Model for cell-resolution description of epithelial tissue mechanics.

    Science.gov (United States)

    Barton, Daniel L; Henkes, Silke; Weijer, Cornelis J; Sknepnek, Rastko

    2017-06-01

    We introduce an Active Vertex Model (AVM) for cell-resolution studies of the mechanics of confluent epithelial tissues consisting of tens of thousands of cells, with a level of detail inaccessible to similar methods. The AVM combines the Vertex Model for confluent epithelial tissues with active matter dynamics. This introduces a natural description of the cell motion and accounts for motion patterns observed on multiple scales. Furthermore, cell contacts are generated dynamically from positions of cell centres. This not only enables efficient numerical implementation, but provides a natural description of the T1 transition events responsible for local tissue rearrangements. The AVM also includes cell alignment, cell-specific mechanical properties, cell growth, division and apoptosis. In addition, the AVM introduces a flexible, dynamically changing boundary of the epithelial sheet allowing for studies of phenomena such as the fingering instability or wound healing. We illustrate these capabilities with a number of case studies.

  6. A Note on the Relation between Factor Analytic and Item Response Theory Models

    Science.gov (United States)

    Kamata, Akihito; Bauer, Daniel J.

    2008-01-01

    The relations among several alternative parameterizations of the binary factor analysis model and the 2-parameter item response theory model are discussed. It is pointed out that different parameterizations of factor analysis model parameters can be transformed into item response model theory parameters, and general formulas are provided.…

  7. Aircraft/Air Traffic Management Functional Analysis Model: Technical Description. 2.0

    Science.gov (United States)

    Etheridge, Melvin; Plugge, Joana; Retina, Nusrat

    1998-01-01

    The Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 (FAM 2.0), is a discrete event simulation model designed to support analysis of alternative concepts in air traffic management and control. FAM 2.0 was developed by the Logistics Management Institute (LMI) under a National Aeronautics and Space Administration (NASA) contract. This document provides a technical description of FAM 2.0 and its computer files to enable the modeler and programmer to make enhancements or modifications to the model. Those interested in a guide for using the model in analysis should consult the companion document, Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 Users Manual.

  8. A computationally efficient description of heterogeneous freezing: A simplified version of the Soccer ball model

    Science.gov (United States)

    Niedermeier, Dennis; Ervens, Barbara; Clauss, Tina; Voigtländer, Jens; Wex, Heike; Hartmann, Susan; Stratmann, Frank

    2014-01-01

    In a recent study, the Soccer ball model (SBM) was introduced for modeling and/or parameterizing heterogeneous ice nucleation processes. The model applies classical nucleation theory. It allows for a consistent description of both apparently singular and stochastic ice nucleation behavior, by distributing contact angles over the nucleation sites of a particle population assuming a Gaussian probability density function. The original SBM utilizes the Monte Carlo technique, which hampers its usage in atmospheric models, as fairly time-consuming calculations must be performed to obtain statistically significant results. Thus, we have developed a simplified and computationally more efficient version of the SBM. We successfully used the new SBM to parameterize experimental nucleation data of, e.g., bacterial ice nucleation. Both SBMs give identical results; however, the new model is computationally less expensive as confirmed by cloud parcel simulations. Therefore, it is a suitable tool for describing heterogeneous ice nucleation processes in atmospheric models.

  9. Strategy for a Rock Mechanics Site Descriptive Model. Development and testing of the theoretical approach

    Energy Technology Data Exchange (ETDEWEB)

    Staub, Isabelle; Fredriksson, Anders; Outters, Nils [Golder Associates AB, Uppsala (Sweden)

    2002-05-01

    In the purpose of studying the possibilities of a Deep Repository for spent fuel, the Swedish Nuclear and Fuel Management Company (SKB) is currently planning for Site Investigations. Data collected from these Site Investigations are interpreted and analysed to achieve the full Site Description, which is built up of models from all the disciplines that are considered of importance for the Site Description. One of these models is the Rock Mechanical Descriptive Model,which would be developed for any site in hard crystalline rock, and is a combination and evaluation of the characterisation of rock mass by means of empirical relationships and a theoretical approach based on numerical modelling. The present report describes the theoretical approach. The characterisation of the mechanical properties of the rock mass, viewed as a unit consisting of intact rock and fractures, is achieved by numerical simulations with following input parameters: initial stresses, fracture geometry, distribution of rock mechanical properties, such as deformation and strength parameters, for the intact rock and for the fractures. The numerical modelling was performed with the two-dimensional code UDEC, and the rock block models were generated from 2D trace sections extracted from the 3D Discrete Fracture Network (DFN) model. Assumptions and uncertainties related to the set-up of the model are considered. The numerical model was set-up to simulate a plain strain-loading test. Different boundary conditions were applied on the model for simulating stress conditions (I) in the undisturbed rock mass, and (II) at the proximity of a tunnel. In order to assess the reliability of the model sensitivity analyses have been conducted on some rock block models for defining the dependency of mechanical properties to in situ stresses, the influence of boundary conditions, rock material and joint constitutive models used to simulate the behaviour of intact rock and fractures, domain size and anisotropy. To

  10. Research Note:

    DEFF Research Database (Denmark)

    Behuria, Pritish; Buur, Lars; Gray, Hazel

    2017-01-01

    employed in varied ways in the political settlements literature, which in turn has led to various methodologies to study power. The note discusses a number of these methodologies, including studying political ruptures as a window into analyzing the distribution of power in African countries, and emphasizes......The political settlements approach emerged out of a critique of new institutional economics developed by Mushtaq Khan in the 1990s. Since then, the political settlements approach has proliferated in donor programmingand academic scholarship on African countries. This has led to some confusion about...... its core conceptual and methodological features. This Research Note starts by setting out our understanding of political settlements and provides an overview of existing political settlements literature on African countries. The note then explores how the key concept of ‘holding power’ has been...

  11. SAFETY NOTES

    CERN Document Server

    TIS Secretariat

    2001-01-01

    Please note that the revisions of safety notes no 3 (NS 3 Rev. 2) and no 24 (NS 24 REV.) entitled respectively 'FIRE PREVENTION FOR ENCLOSED SPACES IN LARGE HALLS' and 'REMOVING UNBURIED ELV AND LVA ELECTRIC CONDUITS' are available on the web at the following urls: http://edmsoraweb.cern.ch:8001/cedar/doc.download?document_id=322811&version=1&filename=version_francaise.pdf http://edmsoraweb.cern.ch:8001/cedar/doc.download?document_id=322861&version=2&filename=version_francaise.pdf Paper copies can also be obtained from the TIS Divisional Secretariat, email tis.secretariat@cern.ch

  12. ASPEN: A fully kinetic, reduced-description particle-in-cell model for simulating parametric instabilities

    International Nuclear Information System (INIS)

    Vu, H.X.; Bezzerides, B.; DuBois, D.F.

    1999-01-01

    A fully kinetic, reduced-description particle-in-cell (RPIC) model is presented in which deviations from quasineutrality, electron and ion kinetic effects, and nonlinear interactions between low-frequency and high-frequency parametric instabilities are modeled correctly. The model is based on a reduced description where the electromagnetic field is represented by three separate temporal envelopes in order to model parametric instabilities with low-frequency and high-frequency daughter waves. Because temporal envelope approximations are invoked, the simulation can be performed on the electron time scale instead of the time scale of the light waves. The electrons and ions are represented by discrete finite-size particles, permitting electron and ion kinetic effects to be modeled properly. The Poisson equation is utilized to ensure that space-charge effects are included. The RPIC model is fully three dimensional and has been implemented in two dimensions on the Accelerated Strategic Computing Initiative (ASCI) parallel computer at Los Alamos National Laboratory, and the resulting simulation code has been named ASPEN. The authors believe this code is the first particle-in-cell code capable of simulating the interaction between low-frequency and high-frequency parametric instabilities in multiple dimensions. Test simulations of stimulated Raman scattering, stimulated Brillouin scattering, and Langmuir decay instability are presented

  13. Multi-scale modelling of ions in solution: from atomistic descriptions to chemical engineering

    International Nuclear Information System (INIS)

    Molina, J.J.

    2011-01-01

    Ions in solution play a fundamental role in many physical, chemical, and biological processes. The PUREX process used in the nuclear industry to the treatment of spent nuclear fuels is considered as an example. For industrial applications these systems are usually described using simple analytical models which are fitted to reproduce the available experimental data. In this work, we propose a multi-scale coarse graining procedure to derive such models from atomistic descriptions. First, parameters for classical force-fields of ions in solution are extracted from ab-initio calculations. Effective (McMillan-Mayer) ion-ion potentials are then derived from radial distribution functions measured in classical molecular dynamics simulations, allowing us to define an implicit solvent model of electrolytes. Finally, perturbation calculations are performed to define the best possible representation for these systems, in terms of charged hard-sphere models. Our final model is analytical and contains no free 'fitting' parameters. It shows good agreement with the exact results obtained from Monte-Carlo simulations for the thermodynamic and structural properties. Development of a similar model for the electrolyte viscosity, from information derived from atomistic descriptions, is also introduced. (author)

  14. A cautionary note on the use of Ornstein Uhlenbeck models in macroevolutionary studies.

    Science.gov (United States)

    Cooper, Natalie; Thomas, Gavin H; Venditti, Chris; Meade, Andrew; Freckleton, Rob P

    2016-05-01

    Phylogenetic comparative methods are increasingly used to give new insights into the dynamics of trait evolution in deep time. For continuous traits the core of these methods is a suite of models that attempt to capture evolutionary patterns by extending the Brownian constant variance model. However, the properties of these models are often poorly understood, which can lead to the misinterpretation of results. Here we focus on one of these models - the Ornstein Uhlenbeck (OU) model. We show that the OU model is frequently incorrectly favoured over simpler models when using Likelihood ratio tests, and that many studies fitting this model use datasets that are small and prone to this problem. We also show that very small amounts of error in datasets can have profound effects on the inferences derived from OU models. Our results suggest that simulating fitted models and comparing with empirical results is critical when fitting OU and other extensions of the Brownian model. We conclude by making recommendations for best practice in fitting OU models in phylogenetic comparative analyses, and for interpreting the parameters of the OU model.

  15. On the applicability of deformed jellium model to the description of metal clusters

    DEFF Research Database (Denmark)

    Lyalin, Andrey G.; Matveentsev, Anton; Solov'yov, Ilia

    2003-01-01

    This work is devoted to the elucidation the applicability of jellium model to the description of alkali cluster properties on the basis of comparison the jellium model results with those derived from experiment and within ab initio theoretical framework. On the basis of the Hartree-Fock and local...... with the results derived from the ab initio all-electron simulations of cluster electronic and ionic structure based on the density functional theory as well as on the post Hartree-Fock perturbation theory on many-electron correlation interaction. The comparison performed demonstrates the great role of cluster...

  16. Geothermal loan guaranty cash flow model: description and users' manual

    Energy Technology Data Exchange (ETDEWEB)

    Keimig, M.A.; Rosenberg, J.I.; Entingh, D.J.

    1980-11-01

    This is the users guide for the Geothermal Loan Guaranty Cash Flow Model (GCFM). GCFM is a Fortran code which designs and costs geothermal fields and electric power plants. It contains a financial analysis module which performs life cycle costing analysis taking into account various types of taxes, costs and financial structures. The financial module includes a discounted cash flow feature which calculates a levelized breakeven price for each run. The user's guide contains descriptions of the data requirements and instructions for using the model.

  17. Methodological notes on model comparisons and strategy classification: A falsificationist proposition

    OpenAIRE

    Morten Moshagen; Benjamin E. Hilbig

    2011-01-01

    Taking a falsificationist perspective, the present paper identifies two major shortcomings of existing approaches to comparative model evaluations in general and strategy classifications in particular. These are (1) failure to consider systematic error and (2) neglect of global model fit. Using adherence measures to evaluate competing models implicitly makes the unrealistic assumption that the error associated with the model predictions is entirely random. By means of simple schematic example...

  18. An updated MILES stellar library and stellar population models (Research Note)

    NARCIS (Netherlands)

    Falcon-Barroso, J.; Sanchez-Blazquez, P.; Vazdekis, A.; Ricciardelli, E.; Cardiel, N.; Cenarro, A. J.; Gorgas, J.; Peletier, R. F.

    Aims: We present a number of improvements to the MILES library and stellar population models. We correct some small errors in the radial velocities of the stars, measure the spectral resolution of the library and models more accurately, and give a better absolute flux calibration of the models.

  19. A Note on the Item Information Function of the Four-Parameter Logistic Model

    Science.gov (United States)

    Magis, David

    2013-01-01

    This article focuses on four-parameter logistic (4PL) model as an extension of the usual three-parameter logistic (3PL) model with an upper asymptote possibly different from 1. For a given item with fixed item parameters, Lord derived the value of the latent ability level that maximizes the item information function under the 3PL model. The…

  20. Please note

    CERN Multimedia

    2006-01-01

    Members of the personnel are invited to take note that only parcels corresponding to official orders or contracts will be handled at CERN. Individuals are not authorised to have private merchandise delivered to them at CERN and private deliveries will not be accepted by the Goods Reception services. Thank you for your understanding. (Version française la semaine prochaine.)

  1. Editor's note

    Indian Academy of Sciences (India)

    Unknown

    Editor's note. It gives me immense pleasure to present this first issue of the Journal for the year 2004. You may notice several changes. The most important one is the change in the name; the Journal is renamed as Journal of Chemical. Sciences. We have also introduced the publication of. Perspective articles highlighting ...

  2. Editor's Note

    African Journals Online (AJOL)

    On another note: the editor and the editorial team acknowledge the financial support of the Carnegie Corporation of New York through the University of Ghana Building A New Generation of Academics in Africa (BANGA-Africa) Project. We also use this platform to express our gratitude for the support of various stakeholders, ...

  3. Research Note: Full-waveform inversion of the unwrapped phase of a model

    KAUST Repository

    Alkhalifah, Tariq Ali

    2013-12-06

    Reflections in seismic data induce serious non-linearity in the objective function of full- waveform inversion. Thus, without a good initial velocity model that can produce reflections within a half cycle of the frequency used in the inversion, convergence to a solution becomes difficult. As a result, we tend to invert for refracted events and damp reflections in data. Reflection induced non-linearity stems from cycle skipping between the imprint of the true model in observed data and the predicted model in synthesized data. Inverting for the phase of the model allows us to address this problem by avoiding the source of non-linearity, the phase wrapping phenomena. Most of the information related to the location (or depths) of interfaces is embedded in the phase component of a model, mainly influenced by the background model, while the velocity-contrast information (responsible for the reflection energy) is mainly embedded in the amplitude component. In combination with unwrapping the phase of data, which mitigates the non-linearity introduced by the source function, I develop a framework to invert for the unwrapped phase of a model, represented by the instantaneous depth, using the unwrapped phase of the data. The resulting gradient function provides a mechanism to non-linearly update the velocity model by applying mainly phase shifts to the model. In using the instantaneous depth as a model parameter, we keep track of the model properties unfazed by the wrapping phenomena. © 2013 European Association of Geoscientists & Engineers.

  4. A Note on the Use of Mixture Models for Individual Prediction.

    Science.gov (United States)

    Cole, Veronica T; Bauer, Daniel J

    Mixture models capture heterogeneity in data by decomposing the population into latent subgroups, each of which is governed by its own subgroup-specific set of parameters. Despite the flexibility and widespread use of these models, most applications have focused solely on making inferences for whole or sub-populations, rather than individual cases. The current article presents a general framework for computing marginal and conditional predicted values for individuals using mixture model results. These predicted values can be used to characterize covariate effects, examine the fit of the model for specific individuals, or forecast future observations from previous ones. Two empirical examples are provided to demonstrate the usefulness of individual predicted values in applications of mixture models. The first example examines the relative timing of initiation of substance use using a multiple event process survival mixture model whereas the second example evaluates changes in depressive symptoms over adolescence using a growth mixture model.

  5. A Note on Some Numerical Approaches to Solve a θ˙ Neuron Networks Model

    Directory of Open Access Journals (Sweden)

    Samir Kumar Bhowmik

    2014-01-01

    Full Text Available Space time integration plays an important role in analyzing scientific and engineering models. In this paper, we consider an integrodifferential equation that comes from modeling θ˙ neuron networks. Here, we investigate various schemes for time discretization of a theta-neuron model. We use collocation and midpoint quadrature formula for space integration and then apply various time integration schemes to get a full discrete system. We present some computational results to demonstrate the schemes.

  6. A Note on Equivalence Among Various Scalar Field Models of Dark Energies

    Science.gov (United States)

    Mandal, Jyotirmay Das; Debnath, Ujjal

    2017-08-01

    In this work, we have tried to find out similarities between various available models of scalar field dark energies (e.g., quintessence, k-essence, tachyon, phantom, quintom, dilatonic dark energy, etc). We have defined an equivalence relation from elementary set theory between scalar field models of dark energies and used fundamental ideas from linear algebra to set up our model. Consequently, we have obtained mutually disjoint subsets of scalar field dark energies with similar properties and discussed our observation.

  7. Technical note: Cascade of submerged reservoirs as a rainfall-runoff model

    Science.gov (United States)

    Kurnatowski, Jacek

    2017-09-01

    The rainfall-runoff conceptual model as a cascade of submerged linear reservoirs with particular outflows depending on storages of adjoining reservoirs is developed. The model output contains different exponential functions with roots of Chebyshev polynomials of the first kind as exponents. The model is applied to instantaneous unit hydrograph (IUH) and recession curve problems and compared with the analogous results of the Nash cascade. A case study is performed on a basis of 46 recession periods. Obtained results show the usefulness of the model as an alternative concept to the Nash cascade.

  8. Review of Project SAFE: Comments on biosphere conceptual model description and risk assessment methodology

    International Nuclear Information System (INIS)

    Klos, Richard; Wilmot, Roger

    2002-09-01

    The Swedish Nuclear Fuel and Waste Management Company's (SKB's) most recent assessment of the safety of the Forsmark repository for low-level and intermediate-level waste (Project SAFE) is currently undergoing review by the Swedish regulators. As part of its review, the Swedish Radiation Protection Institute (SSI) identified that two components of SAFE require more detailed review: (i) the conceptual model description of the biosphere system, and (ii) SKB's risk assessment methodology. We have reviewed the biosphere system interaction matrix and how this has been used in the identification, justification and description of biosphere models for radiological assessment purposes. The risk assessment methodology has been reviewed considering in particular issues associated with scenario selection, assessment timescale, and the probability and risk associated with the well scenario. There is an extensive range of supporting information on which biosphere modelling in Project SAFE is based. However, the link between this material and the biosphere models themselves is not clearly set out. This leads to some contradictions and mis-matches between description and implementation. One example concerns the representation of the geosphere-biosphere interface. The supporting description of lakes indicates that interaction between groundwaters entering the biosphere through lake bed sediments could lead to accumulations of radionuclides in sediments. These sediments may become agricultural areas at some time in the future. In the numerical modelling of the biosphere carried out in Project SAFE, the direct accumulation of contaminants in bed sediments is not represented. Application of a more rigorous procedure to ensure numerical models are fit for purpose is recommended, paying more attention to issues associated with the geosphere-biosphere interface. A more structured approach to risk assessment would be beneficial, with a better explanation of the difference between

  9. Review of Project SAFE: Comments on biosphere conceptual model description and risk assessment methodology

    Energy Technology Data Exchange (ETDEWEB)

    Klos, Richard; Wilmot, Roger [Galson Sciences Ltd (United Kingdom)

    2002-09-01

    The Swedish Nuclear Fuel and Waste Management Company's (SKB's) most recent assessment of the safety of the Forsmark repository for low-level and intermediate-level waste (Project SAFE) is currently undergoing review by the Swedish regulators. As part of its review, the Swedish Radiation Protection Institute (SSI) identified that two components of SAFE require more detailed review: (i) the conceptual model description of the biosphere system, and (ii) SKB's risk assessment methodology. We have reviewed the biosphere system interaction matrix and how this has been used in the identification, justification and description of biosphere models for radiological assessment purposes. The risk assessment methodology has been reviewed considering in particular issues associated with scenario selection, assessment timescale, and the probability and risk associated with the well scenario. There is an extensive range of supporting information on which biosphere modelling in Project SAFE is based. However, the link between this material and the biosphere models themselves is not clearly set out. This leads to some contradictions and mis-matches between description and implementation. One example concerns the representation of the geosphere-biosphere interface. The supporting description of lakes indicates that interaction between groundwaters entering the biosphere through lake bed sediments could lead to accumulations of radionuclides in sediments. These sediments may become agricultural areas at some time in the future. In the numerical modelling of the biosphere carried out in Project SAFE, the direct accumulation of contaminants in bed sediments is not represented. Application of a more rigorous procedure to ensure numerical models are fit for purpose is recommended, paying more attention to issues associated with the geosphere-biosphere interface. A more structured approach to risk assessment would be beneficial, with a better explanation of the difference

  10. The structure concept in the description of mixing turbulence: the 2SFK model

    International Nuclear Information System (INIS)

    Llor, A.; Poujade, O.; Lardjane, N.

    2009-01-01

    To meet our modelling needs on turbulent flows produced by gravitational instabilities (of Rayleigh-Taylor or Richtmyer-Meshkov type), we have developed an original approach, designated as 2SFK for '2-structure, 2-fluid, 2-turbulent'. We provide the physical elements, theoretical, experimental, and numerical, which support this choice. A full description being out of question here, we give the principles of the model derivation, which hinges around an averaging conditioned by presence functions of the large structures in the flow, and discuss its distinctive properties compared to usual 'single-fluid' models. Numerical 1-dimension results on elementary flows illustrate the satisfactory behaviour of the model. All along this article, emphasis is given on the peculiar characteristics of turbulence in the Rayleigh-Taylor flow (possibly under variable acceleration): energy balance, characteristic size of large eddies, directed transport, enhanced diffusion, etc. (authors)

  11. A Descriptive Model of Robot Team and the Dynamic Evolution of Robot Team Cooperation

    Directory of Open Access Journals (Sweden)

    Zhen-min Tang

    2008-11-01

    Full Text Available At present, the research on robot team cooperation is still in qualitative analysis phase and lacks the description model that can quantitatively describe the dynamical evolution of team cooperative relationships with constantly changeable task demand in Multi-robot field. First this paper whole and static describes organization model HWROM of robot team, then uses Markov course and Bayesian theorem for reference, dynamical describes the team cooperative relationships building. Finally from cooperative entity layer, ability layer and relative layer we research team formation and cooperative mechanism, and discuss how to optimize relative action sets during the evolution. The dynamic evolution model of robot team and cooperative relationships between robot teams proposed and described in this paper can not only generalize the robot team as a whole, but also depict the dynamic evolving process quantitatively. Users can also make the prediction of the cooperative relationship and the action of the robot team encountering new demands based on this model.

  12. A Descriptive Model of Robot Team and the Dynamic Evolution of Robot Team Cooperation

    Directory of Open Access Journals (Sweden)

    Shu-qin Li

    2005-06-01

    Full Text Available At present, the research on robot team cooperation is still in qualitative analysis phase and lacks the description model that can quantitatively describe the dynamical evolution of team cooperative relationships with constantly changeable task demand in Multi-robot field. First this paper whole and static describes organization model HWROM of robot team, then uses Markov course and Bayesian theorem for reference, dynamical describes the team cooperative relationships building. Finally from cooperative entity layer, ability layer and relative layer we research team formation and cooperative mechanism, and discuss how to optimize relative action sets during the evolution. The dynamic evolution model of robot team and cooperative relationships between robot teams proposed and described in this paper can not only generalize the robot team as a whole, but also depict the dynamic evolving process quantitatively. Users can also make the prediction of the cooperative relationship and the action of the robot team encountering new demands based on this model.

  13. Issues in Developing a Normative Descriptive Model for Dyadic Decision Making

    Science.gov (United States)

    Serfaty, D.; Kleinman, D. L.

    1984-01-01

    Most research in modelling human information processing and decision making has been devoted to the case of the single human operator. In the present effort, concepts from the fields of organizational behavior, engineering psychology, team theory and mathematical modelling are merged in an attempt to consider first the case of two cooperating decisionmakers (the Dyad) in a multi-task environment. Rooted in the well-known Dynamic Decision Model (DDM), the normative descriptive approach brings basic cognitive and psychophysical characteristics inherent to human behavior into a team theoretic analytic framework. An experimental paradigm, involving teams in dynamic decision making tasks, is designed to produce the data with which to build the theoretical model.

  14. A note on estimating urban roof runoff with a forest evaporation model

    NARCIS (Netherlands)

    Gash, J.H.C.; Rosier, P.T.W.; Ragab, R.

    2008-01-01

    A model developed for estimating the evaporation of rainfall intercepted by forest canopies is applied to estimate measurements of the average runoff from the roofs of six houses made in a previous study of hydrological processes in an urban environment. The model is applied using values of the mean

  15. A Classroom Note on: Modeling Functions with the TI-83/84 Calculator

    Science.gov (United States)

    Lubowsky, Jack

    2011-01-01

    In Pre-Calculus courses, students are taught the composition and combination of functions to model physical applications. However, when combining two or more functions into a single more complicated one, students may lose sight of the physical picture which they are attempting to model. A block diagram, or flow chart, in which each block…

  16. A Third Note on Ageing in a Library Circulation Model: Applications to Future Use and Relegation.

    Science.gov (United States)

    Burrell, Quentin L.

    1987-01-01

    Describes a circulation model for academic research libraries which uses the mixed Poisson model, incorporating ageing of library materials, to predict future use of monographs and to suggest weeding procedures based on frequency of circulation. Longitudinal studies are examined and statistical details are appended. (Author/LRW)

  17. Quantitative Modeling of Human Performance in Information Systems. Technical Research Note 232.

    Science.gov (United States)

    Baker, James D.

    1974-01-01

    A general information system model was developed which focuses on man and considers the computer only as a tool. The ultimate objective is to produce a simulator which will yield measures of system performance under different mixes of equipment, personnel, and procedures. The model is structured around three basic dimensions: (1) data flow and…

  18. Technical Note: Approximate Bayesian parameterization of a process-based tropical forest model

    Science.gov (United States)

    Hartig, F.; Dislich, C.; Wiegand, T.; Huth, A.

    2014-02-01

    Inverse parameter estimation of process-based models is a long-standing problem in many scientific disciplines. A key question for inverse parameter estimation is how to define the metric that quantifies how well model predictions fit to the data. This metric can be expressed by general cost or objective functions, but statistical inversion methods require a particular metric, the probability of observing the data given the model parameters, known as the likelihood. For technical and computational reasons, likelihoods for process-based stochastic models are usually based on general assumptions about variability in the observed data, and not on the stochasticity generated by the model. Only in recent years have new methods become available that allow the generation of likelihoods directly from stochastic simulations. Previous applications of these approximate Bayesian methods have concentrated on relatively simple models. Here, we report on the application of a simulation-based likelihood approximation for FORMIND, a parameter-rich individual-based model of tropical forest dynamics. We show that approximate Bayesian inference, based on a parametric likelihood approximation placed in a conventional Markov chain Monte Carlo (MCMC) sampler, performs well in retrieving known parameter values from virtual inventory data generated by the forest model. We analyze the results of the parameter estimation, examine its sensitivity to the choice and aggregation of model outputs and observed data (summary statistics), and demonstrate the application of this method by fitting the FORMIND model to field data from an Ecuadorian tropical forest. Finally, we discuss how this approach differs from approximate Bayesian computation (ABC), another method commonly used to generate simulation-based likelihood approximations. Our results demonstrate that simulation-based inference, which offers considerable conceptual advantages over more traditional methods for inverse parameter estimation

  19. Technical Note: Approximate Bayesian parameterization of a complex tropical forest model

    Science.gov (United States)

    Hartig, F.; Dislich, C.; Wiegand, T.; Huth, A.

    2013-08-01

    Inverse parameter estimation of process-based models is a long-standing problem in ecology and evolution. A key problem of inverse parameter estimation is to define a metric that quantifies how well model predictions fit to the data. Such a metric can be expressed by general cost or objective functions, but statistical inversion approaches are based on a particular metric, the probability of observing the data given the model, known as the likelihood. Deriving likelihoods for dynamic models requires making assumptions about the probability for observations to deviate from mean model predictions. For technical reasons, these assumptions are usually derived without explicit consideration of the processes in the simulation. Only in recent years have new methods become available that allow generating likelihoods directly from stochastic simulations. Previous applications of these approximate Bayesian methods have concentrated on relatively simple models. Here, we report on the application of a simulation-based likelihood approximation for FORMIND, a parameter-rich individual-based model of tropical forest dynamics. We show that approximate Bayesian inference, based on a parametric likelihood approximation placed in a conventional MCMC, performs well in retrieving known parameter values from virtual field data generated by the forest model. We analyze the results of the parameter estimation, examine the sensitivity towards the choice and aggregation of model outputs and observed data (summary statistics), and show results from using this method to fit the FORMIND model to field data from an Ecuadorian tropical forest. Finally, we discuss differences of this approach to Approximate Bayesian Computing (ABC), another commonly used method to generate simulation-based likelihood approximations. Our results demonstrate that simulation-based inference, which offers considerable conceptual advantages over more traditional methods for inverse parameter estimation, can

  20. Grammatical Conversion of Descriptive Narrative - an application of discourse analysis in conceptual modelling

    Directory of Open Access Journals (Sweden)

    Bruce Calway

    1996-05-01

    Full Text Available Fact-oriented conceptual modelling begins with the search for facts about a universe of discourse (UoD. These facts may be obtained from many sources, including information systems reports, tables, manuals and descriptive narrative both verbal and written. This paper presents some initial findings that support the use of discourse analysis techniques as an approach to developing elementary fact based sentences for information systems conceptual schema development from written text. Although this discussion paper only considers the NIAM (fact-oriented conceptual schema modelling method, the IS087 report from which the research case study is taken describes other conceptual methods for which the research contained in this paper could be applicable (e.g. Entity Relationship analysis. The case study could be modelled exactly in the form in which the text is initially found, but grammatical analysis focuses consideration on alternative, potentially better, expressions of a sentence, a theme which is described and demonstrated. As a result of having applied grammatical sentence simplification with co-ordinate clause splitting, each sentence could be expressed as a complete, finite, independent collection of declarative simple statements. The outcome from the application of the techniques described provides at a minimum a discourse analysis of descriptive narrative which will have retained its meaning and contextual integrity while at the same time providing a simplified and independent clause representation for input to the fact-oriented conceptual schema modelling procedure.

  1. Balance or Synergies between Environment and Economy—A Note on Model Structures

    Directory of Open Access Journals (Sweden)

    Sarah Wolf

    2016-08-01

    Full Text Available The UN sustainable development goals contain environmental, economic, and social objectives. They may only be reached, or at least it would be easier to reach them, if instead of a trade-off between these objectives that implies a need for balancing them, there are synergies to be reaped. This paper discusses how the structures of economic models typically used in policy analysis influence whether win–win strategies for the environment and the economy can be conceptualised and analysed. With a focus on climate policy modelling, the paper points out how, by construction, commonly used model structures find mitigation costs rather than benefits. This paper describes mechanisms that, when added to these model structures, can bring win–win options into a model’s solution horizon, and which provide a spectrum of alternative modelling approaches that allow for the identification of such options.

  2. Protein structure modelling and evaluation based on a 4-distance description of side-chain interactions

    Directory of Open Access Journals (Sweden)

    Inbar Yuval

    2010-07-01

    Full Text Available Abstract Background Accurate evaluation and modelling of residue-residue interactions within and between proteins is a key aspect of computational structure prediction including homology modelling, protein-protein docking, refinement of low-resolution structures, and computational protein design. Results Here we introduce a method for accurate protein structure modelling and evaluation based on a novel 4-distance description of residue-residue interaction geometry. Statistical 4-distance preferences were extracted from high-resolution protein structures and were used as a basis for a knowledge-based potential, called Hunter. We demonstrate that 4-distance description of side chain interactions can be used reliably to discriminate the native structure from a set of decoys. Hunter ranked the native structure as the top one in 217 out of 220 high-resolution decoy sets, in 25 out of 28 "Decoys 'R' Us" decoy sets and in 24 out of 27 high-resolution CASP7/8 decoy sets. The same concept was applied to side chain modelling in protein structures. On a set of very high-resolution protein structures the average RMSD was 1.47 Å for all residues and 0.73 Å for buried residues, which is in the range of attainable accuracy for a model. Finally, we show that Hunter performs as good or better than other top methods in homology modelling based on results from the CASP7 experiment. The supporting web site http://bioinfo.weizmann.ac.il/hunter/ was developed to enable the use of Hunter and for visualization and interactive exploration of 4-distance distributions. Conclusions Our results suggest that Hunter can be used as a tool for evaluation and for accurate modelling of residue-residue interactions in protein structures. The same methodology is applicable to other areas involving high-resolution modelling of biomolecules.

  3. Colobopsis explodens sp. n., model species for studies on “exploding ants” (Hymenoptera, Formicidae, with biological notes and first illustrations of males of the Colobopsis cylindrica group

    Directory of Open Access Journals (Sweden)

    Alice Laciny

    2018-04-01

    Full Text Available A taxonomic description of all castes of Colobopsis explodens Laciny & Zettel, sp. n. from Borneo, Thailand, and Malaysia is provided, which serves as a model species for biological studies on “exploding ants” in Southeast Asia. The new species is a member of the Colobopsis cylindrica (COCY group and falls into a species complex that has been repeatedly summarized under the name Colobopsis saundersi (Emery, 1889 (formerly Camponotus saundersi. The COCY species group is known under its vernacular name “exploding ants” for a unique behaviour: during territorial combat, workers of some species sacrifice themselves by rupturing their gaster and releasing sticky and irritant contents of their hypertrophied mandibular gland reservoirs to kill or repel rivals. This study includes first illustrations and morphometric characterizations of males of the COCY group: Colobopsis explodens Laciny & Zettel, sp. n. and Colobopsis badia (Smith, 1857. Characters of male genitalia and external morphology are compared with other selected taxa of Camponotini. Preliminary notes on the biology of C. explodens Laciny & Zettel, sp. n. are provided. To fix the species identity of the closely related C. badia, a lectotype from Singapore is designated. The following taxonomic changes within the C. saundersi complex are proposed: Colobopsis solenobia (Menozzi, 1926, syn. n. and Colobopsis trieterica (Menozzi, 1926, syn. n. are synonymized with Colobopsis corallina Roger, 1863, a common endemic species of the Philippines. Colobopsis saginata Stitz, 1925, stat. n., hitherto a subspecies of C. badia, is raised to species level.

  4. A note on inventory model for ameliorating items with time dependent second order demand rate

    Directory of Open Access Journals (Sweden)

    Gobinda Chandra Panda

    2013-03-01

    Full Text Available Background: This paper is concerned with the development of ameliorating inventory models. The ameliorating inventory is the inventory of goods whose utility increases over the time by ameliorating activation. Material and Methods: This study is performed according to two areas: one is an economic order quantity (EOQ model for the items whose utility is ameliorating in accordance with Weibull distribution, and the other is a partial selling quantity (PSQ model developed for selling the surplus inventory accumulated by ameliorating activation with linear demand. The aim of this paper was to develop a mathematical model for inventory type concerned in the paper. Numerical examples were presented show the effect of ameliorating rate on inventory polices.  Results and Conclusions:  The inventory model for items with Weibull ameliorating is developed. For the case of small ameliorating rate (less than linear demand rate, EOQ model is developed, and for the case where ameliorating rate is greater than linear demand rate, PSQ model is developed.  .  

  5. A note on probabilistic models over strings: the linear algebra approach.

    Science.gov (United States)

    Bouchard-Côté, Alexandre

    2013-12-01

    Probabilistic models over strings have played a key role in developing methods that take into consideration indels as phylogenetically informative events. There is an extensive literature on using automata and transducers on phylogenies to do inference on these probabilistic models, in which an important theoretical question is the complexity of computing the normalization of a class of string-valued graphical models. This question has been investigated using tools from combinatorics, dynamic programming, and graph theory, and has practical applications in Bayesian phylogenetics. In this work, we revisit this theoretical question from a different point of view, based on linear algebra. The main contribution is a set of results based on this linear algebra view that facilitate the analysis and design of inference algorithms on string-valued graphical models. As an illustration, we use this method to give a new elementary proof of a known result on the complexity of inference on the "TKF91" model, a well-known probabilistic model over strings. Compared to previous work, our proving method is easier to extend to other models, since it relies on a novel weak condition, triangular transducers, which is easy to establish in practice. The linear algebra view provides a concise way of describing transducer algorithms and their compositions, opens the possibility of transferring fast linear algebra libraries (for example, based on GPUs), as well as low rank matrix approximation methods, to string-valued inference problems.

  6. A Caveat Note on Tuning in the Development of Coupled Climate Models

    Science.gov (United States)

    Dommenget, Dietmar; Rezny, Michael

    2018-01-01

    State-of-the-art coupled general circulation models (CGCMs) have substantial errors in their simulations of climate. In particular, these errors can lead to large uncertainties in the simulated climate response (both globally and regionally) to a doubling of CO2. Currently, tuning of the parameterization schemes in CGCMs is a significant part of the developed. It is not clear whether such tuning actually improves models. The tuning process is (in general) neither documented, nor reproducible. Alternative methods such as flux correcting are not used nor is it clear if such methods would perform better. In this study, ensembles of perturbed physics experiments are performed with the Globally Resolved Energy Balance (GREB) model to test the impact of tuning. The work illustrates that tuning has, in average, limited skill given the complexity of the system, the limited computing resources, and the limited observations to optimize parameters. While tuning may improve model performance (such as reproducing observed past climate), it will not get closer to the "true" physics nor will it significantly improve future climate change projections. Tuning will introduce artificial compensating error interactions between submodels that will hamper further model development. In turn, flux corrections do perform well in most, but not all aspects. A main advantage of flux correction is that it is much cheaper, simpler, more transparent, and it does not introduce artificial error interactions between submodels. These GREB model experiments should be considered as a pilot study to motivate further CGCM studies that address the issues of model tuning.

  7. Balancing the stochastic description of uncertainties as a function of hydrologic model complexity

    Science.gov (United States)

    Del Giudice, D.; Reichert, P.; Albert, C.; Kalcic, M.; Logsdon Muenich, R.; Scavia, D.; Bosch, N. S.; Michalak, A. M.

    2016-12-01

    Uncertainty analysis is becoming an important component of forecasting water and pollutant fluxes in urban and rural environments. Properly accounting for errors in the modeling process can help to robustly assess the uncertainties associated with the inputs (e.g. precipitation) and outputs (e.g. runoff) of hydrological models. In recent years we have investigated several Bayesian methods to infer the parameters of a mechanistic hydrological model along with those of the stochastic error component. The latter describes the uncertainties of model outputs and possibly inputs. We have adapted our framework to a variety of applications, ranging from predicting floods in small stormwater systems to nutrient loads in large agricultural watersheds. Given practical constraints, we discuss how in general the number of quantities to infer probabilistically varies inversely with the complexity of the mechanistic model. Most often, when evaluating a hydrological model of intermediate complexity, we can infer the parameters of the model as well as of the output error model. Describing the output errors as a first order autoregressive process can realistically capture the "downstream" effect of inaccurate inputs and structure. With simpler runoff models we can additionally quantify input uncertainty by using a stochastic rainfall process. For complex hydrologic transport models, instead, we show that keeping model parameters fixed and just estimating time-dependent output uncertainties could be a viable option. The common goal across all these applications is to create time-dependent prediction intervals which are both reliable (cover the nominal amount of validation data) and precise (are as narrow as possible). In conclusion, we recommend focusing both on the choice of the hydrological model and of the probabilistic error description. The latter can include output uncertainty only, if the model is computationally-expensive, or, with simpler models, it can separately account

  8. A cautionary note on generalized linear models for covariance of unbalanced longitudinal data

    KAUST Repository

    Huang, Jianhua Z.

    2012-03-01

    Missing data in longitudinal studies can create enormous challenges in data analysis when coupled with the positive-definiteness constraint on a covariance matrix. For complete balanced data, the Cholesky decomposition of a covariance matrix makes it possible to remove the positive-definiteness constraint and use a generalized linear model setup to jointly model the mean and covariance using covariates (Pourahmadi, 2000). However, this approach may not be directly applicable when the longitudinal data are unbalanced, as coherent regression models for the dependence across all times and subjects may not exist. Within the existing generalized linear model framework, we show how to overcome this and other challenges by embedding the covariance matrix of the observed data for each subject in a larger covariance matrix and employing the familiar EM algorithm to compute the maximum likelihood estimates of the parameters and their standard errors. We illustrate and assess the methodology using real data sets and simulations. © 2011 Elsevier B.V.

  9. A cautionary note on the use of information fit indexes in covariance structure modeling with means

    NARCIS (Netherlands)

    Wicherts, J.M.; Dolan, C.V.

    2004-01-01

    Information fit indexes such as Akaike Information Criterion, Consistent Akaike Information Criterion, Bayesian Information Criterion, and the expected cross validation index can be valuable in assessing the relative fit of structural equation models that differ regarding restrictiveness. In cases

  10. Application note :

    Energy Technology Data Exchange (ETDEWEB)

    Russo, Thomas V.

    2013-08-01

    The development of the XyceTM Parallel Electronic Simulator has focused entirely on the creation of a fast, scalable simulation tool, and has not included any schematic capture or data visualization tools. This application note will describe how to use the open source schematic capture tool gschem and its associated netlist creation tool gnetlist to create basic circuit designs for Xyce, and how to access advanced features of Xyce that are not directly supported by either gschem or gnetlist.

  11. Correction note.

    Science.gov (United States)

    2014-12-01

    Correction note for Sanders, M., Calam, R., Durand, M., Liversidge, T. and Carmont, S. A. (2008), Does self-directed and web-based support for parents enhance the effects of viewing a reality television series based on the Triple P - Positive Parenting Programme?. Journal of Child Psychology and Psychiatry, 49: 924-932. doi: 10.1111/j.1469-7610.2008.01901.x. © 2014 Association for Child and Adolescent Mental Health.

  12. Technical Note: Reducing the spin-up time of integrated surface water–groundwater models

    KAUST Repository

    Ajami, H.

    2014-12-12

    One of the main challenges in the application of coupled or integrated hydrologic models is specifying a catchment\\'s initial conditions in terms of soil moisture and depth-to-water table (DTWT) distributions. One approach to reducing uncertainty in model initialization is to run the model recursively using either a single year or multiple years of forcing data until the system equilibrates with respect to state and diagnostic variables. However, such "spin-up" approaches often require many years of simulations, making them computationally intensive. In this study, a new hybrid approach was developed to reduce the computational burden of the spin-up procedure by using a combination of model simulations and an empirical DTWT function. The methodology is examined across two distinct catchments located in a temperate region of Denmark and a semi-arid region of Australia. Our results illustrate that the hybrid approach reduced the spin-up period required for an integrated groundwater–surface water–land surface model (ParFlow.CLM) by up to 50%. To generalize results to different climate and catchment conditions, we outline a methodology that is applicable to other coupled or integrated modeling frameworks when initialization from an equilibrium state is required.

  13. The effect of simplifying the building description on the numerical modeling of its thermal performance

    Energy Technology Data Exchange (ETDEWEB)

    Stetiu, Corina [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    1993-07-01

    A thermal building simulation program is a numerical model that calculates the response of the building envelopes to weather and human activity, simulates dynamic heating and cooling loads, and heating and cooling distribution systems, and models building equipment operation. The scope of the research is to supply the users of such programs with information about the dangers and benefits of simplifying the input to their models. The Introduction describes the advantages of modeling the heat transfer mechanisms in a building. The programs that perform this type of modeling have, however, limitations. The user is therefore often put in the situation of simplifying the floor plans of the building under study, but not being able to check the effects that this approximation introduces in the results of the simulation. Chapter 1 is a description of methods. It also introduces the floor plans for the office building under study and the ``reasonable`` floor plans simplifications. Chapter 2 presents DOE-2, the thermal building simulation program used in the sensitivity study. The evaluation of the accuracy of the DOE-2 program itself is also presented. Chapter 3 contains the sensitivity study. The complicated nature of the process of interpreting the temperature profile inside a space leads to the necessity of defining different building modes. The study compares the results from the model of the detailed building description with the results from the models of the same building having simplified floor plans. The conclusion is reached that a study of the effects of simplifying the floor plans of a building is important mainly for defining the cases in which this approximation is acceptable. Different results are obtained for different air conditioning/load regimes of the building. 9 refs., 24 figs.

  14. Data description and quality assessment of ionospheric electron density profiles for ARPA modeling project. Technical report

    International Nuclear Information System (INIS)

    Conkright, R.O.

    1977-03-01

    This report presents a description of the automated method used to produce electron density (N(h)) profiles from ionograms recorded on 35mm film and an assessment of the resulting data base. A large data base of about 30,000 profiles was required for an ionospheric modeling project. This motivated a search for an automated method of producing profiles. The automated method used is fully described, the resulting data are given a quality grade, and the noon and midnight profiles are presented. Selected portions of this data base are compared with profiles produced by the standard profiling method in use by the Environmental Data Service at Boulder, Colorado

  15. Description of Hymenolepis microstoma (Nottingham strain: a classical tapeworm model for research in the genomic era

    Directory of Open Access Journals (Sweden)

    Olson Peter D

    2010-12-01

    Full Text Available Abstract Background Hymenolepis microstoma (Dujardin, 1845 Blanchard, 1891, the mouse bile duct tapeworm, is a rodent/beetle-hosted laboratory model that has been used in research and teaching since its domestication in the 1950s. Recent characterization of its genome has prompted us to describe the specific strain that underpins these data, anchoring its identity and bringing the 150+ year-old original description up-to-date. Results Morphometric and ultrastructural analyses were carried out on laboratory-reared specimens of the 'Nottingham' strain of Hymenolepis microstoma used for genome characterization. A contemporary description of the species is provided including detailed illustration of adult anatomy and elucidation of its taxonomy and the history of the specific laboratory isolate. Conclusions Our work acts to anchor the specific strain from which the H. microstoma genome has been characterized and provides an anatomical reference for researchers needing to employ a model tapeworm system that enables easy access to all stages of the life cycle. We review its classification, life history and development, and briefly discuss the genome and other model systems being employed at the beginning of a genomic era in cestodology.

  16. Technical Note: Harmonizing met-ocean model data via standard web services within small research groups

    Science.gov (United States)

    Signell, Richard; Camossi, E.

    2016-01-01

    Work over the last decade has resulted in standardised web services and tools that can significantly improve the efficiency and effectiveness of working with meteorological and ocean model data. While many operational modelling centres have enabled query and access to data via common web services, most small research groups have not. The penetration of this approach into the research community, where IT resources are limited, can be dramatically improved by (1) making it simple for providers to enable web service access to existing output files; (2) using free technologies that are easy to deploy and configure; and (3) providing standardised, service-based tools that work in existing research environments. We present a simple, local brokering approach that lets modellers continue to use their existing files and tools, while serving virtual data sets that can be used with standardised tools. The goal of this paper is to convince modellers that a standardised framework is not only useful but can be implemented with modest effort using free software components. We use NetCDF Markup language for data aggregation and standardisation, the THREDDS Data Server for data delivery, pycsw for data search, NCTOOLBOX (MATLAB®) and Iris (Python) for data access, and Open Geospatial Consortium Web Map Service for data preview. We illustrate the effectiveness of this approach with two use cases involving small research modelling groups at NATO and USGS.

  17. Technical note: Harmonising metocean model data via standard web services within small research groups

    Science.gov (United States)

    Signell, Richard P.; Camossi, Elena

    2016-05-01

    Work over the last decade has resulted in standardised web services and tools that can significantly improve the efficiency and effectiveness of working with meteorological and ocean model data. While many operational modelling centres have enabled query and access to data via common web services, most small research groups have not. The penetration of this approach into the research community, where IT resources are limited, can be dramatically improved by (1) making it simple for providers to enable web service access to existing output files; (2) using free technologies that are easy to deploy and configure; and (3) providing standardised, service-based tools that work in existing research environments. We present a simple, local brokering approach that lets modellers continue to use their existing files and tools, while serving virtual data sets that can be used with standardised tools. The goal of this paper is to convince modellers that a standardised framework is not only useful but can be implemented with modest effort using free software components. We use NetCDF Markup language for data aggregation and standardisation, the THREDDS Data Server for data delivery, pycsw for data search, NCTOOLBOX (MATLAB®) and Iris (Python) for data access, and Open Geospatial Consortium Web Map Service for data preview. We illustrate the effectiveness of this approach with two use cases involving small research modelling groups at NATO and USGS.

  18. Technical Note: Reducing the spin-up time of integrated surface water–groundwater models

    KAUST Repository

    Ajami, H.

    2014-06-26

    One of the main challenges in catchment scale application of coupled/integrated hydrologic models is specifying a catchment\\'s initial conditions in terms of soil moisture and depth to water table (DTWT) distributions. One approach to reduce uncertainty in model initialization is to run the model recursively using a single or multiple years of forcing data until the system equilibrates with respect to state and diagnostic variables. However, such "spin-up" approaches often require many years of simulations, making them computationally intensive. In this study, a new hybrid approach was developed to reduce the computational burden of spin-up time for an integrated groundwater-surface water-land surface model (ParFlow.CLM) by using a combination of ParFlow.CLM simulations and an empirical DTWT function. The methodology is examined in two catchments located in the temperate and semi-arid regions of Denmark and Australia respectively. Our results illustrate that the hybrid approach reduced the spin-up time required by ParFlow.CLM by up to 50%, and we outline a methodology that is applicable to other coupled/integrated modelling frameworks when initialization from equilibrium state is required.

  19. Formation and Development of a Breaker Bar under Regular Waves. Part 1: Model Description and Hydrodynamics

    DEFF Research Database (Denmark)

    Jacobsen, Niels Gjøl; Fredsøe, Jørgen; Hjelmager Jensen, Jacob

    2014-01-01

    in dissipation of organised energy into turbulence is described. The relation of this phase lag to the distribution of the location of maxima in bed shear stresses and magnitude of the undertow is also described. Furthermore, processes in the hydrodynamics, which will have a smoothing effect on the mean cross......In this work a detailed hydrodynamic model is presented, which is used for the study of cross-shore sediment transport and morphodynamics in two dimensions. The model is described in the framework of the generally unstructured, finite volume method. Considerable emphasis is put on those subtleties...... in the morphological formulation, which are required to achieve mass conservation for the amount of sediment in the bed and in suspension. In this first part of two, the hydrodynamic description over the cross-shore profile is presented. The model is validated against an experiment with detailed measurements...

  20. Description and validation of ERAD: An atmospheric dispersion model for high explosive detonations

    Energy Technology Data Exchange (ETDEWEB)

    Boughton, B.A.; DeLaurentis, J.M.

    1992-10-01

    The Explosive Release Atmospheric Dispersion (ERAD) model is a three-dimensional numerical simulation of turbulent atmospheric transport and diffusion. An integral plume rise technique is used to provide a description of the physical and thermodynamic properties of the cloud of warm gases formed when the explosive detonates. Particle dispersion is treated as a stochastic process which is simulated using a discrete time Lagrangian Monte Carlo method. The stochastic process approach permits a more fundamental treatment of buoyancy effects, calm winds and spatial variations in meteorological conditions. Computational requirements of the three-dimensional simulation are substantially reduced by using a conceptualization in which each Monte Carlo particle represents a small puff that spreads according to a Gaussian law in the horizontal directions. ERAD was evaluated against dosage and deposition measurements obtained during Operation Roller Coaster. The predicted contour areas average within about 50% of the observations. The validation results confirm the model`s representation of the physical processes.

  1. Model potential for the description of metal/organic interface states

    Science.gov (United States)

    Armbrust, Nico; Schiller, Frederik; Güdde, Jens; Höfer, Ulrich

    2017-01-01

    We present an analytical one-dimensional model potential for the description of electronic interface states that form at the interface between a metal surface and flat-lying adlayers of π-conjugated organic molecules. The model utilizes graphene as a universal representation of these organic adlayers. It predicts the energy position of the interface state as well as the overlap of its wave function with the bulk metal without free fitting parameters. We show that the energy of the interface state depends systematically on the bond distance between the carbon backbone of the adayers and the metal. The general applicability and robustness of the model is demonstrated by a comparison of the calculated energies with numerous experimental results for a number of flat-lying organic molecules on different closed-packed metal surfaces that cover a large range of bond distances. PMID:28425444

  2. SMATASY. A Program for the model independent description of the Z resonance

    International Nuclear Information System (INIS)

    Kirsch, S.; Riemann, T.

    1994-07-01

    SMATASY is an interface for the ZF I T T ER package and may be used for the model independent description of the Z resonance at LEP 1 and SLC. It allows the determination of the Z mass and width and its resonance shape parameters r and j for cross-sections and their asymmetries. The r describes the peak height and j the interference of the Z resonance with photon exchange in each scattering channel and for σ T , σ FB , σ lr , σ pol etc. separately. Alternatively, the helicity amplitudes for a given scattering channel may be determined. We compare our formalism with other model independent approaches. The model independent treatment of QED corrections in SMATASY is applicable also far away from the Z peak. (orig.)

  3. Wind Turbine Blockset in Matlab/Simulink - General overview and description of the models

    Energy Technology Data Exchange (ETDEWEB)

    Iov, F.; Hansen, A.D.; Soerensen, P.; Blaabjerg, F.

    2004-03-01

    This report presents a new developed Matlab/Simulink Toolbox for wind turbine applications. This toolbox has been developed during the research project 'Simulation Platform to model, optimize and design wind turbines' and it has been used as a general developer tool for other three simulation tools: Saber, DIgSILENT, HAWC. The report provides first a quick overview over Matlab issues and then explains the structure of the developed toolbox. The attention in the report is mainly drawn to the description of the most important mathematical models, which have been developed in the Toolbox. Then, some simulation results using the developed models are shown. Finally, some general conclusions regarding this new developed Toolbox as well as some directions for future work are made. (au)

  4. Model description. NUDOS: A computer program for assessing the consequences of airborne releases of radionuclides

    International Nuclear Information System (INIS)

    Poley, A.D.

    1996-02-01

    NUDOS is a computer program that can be used to evaluate the consequences of airborne releases of radioactive material. The consequences which can be evaluated are individual dose and associated radiological risk, collective dose and the contamination of land. The code is capable of dealing with both continuous (routine) and accidental releases. For accidental releases both deterministic and probabilistic calculations can be performed, and the impact and effectiveness of emergency actions can be evaluated. This report contains a description of the models contained in NUDOS92 and the recommended values for the input parameters of these models. Additionally, a short overview is given of the future model improvement planned for the next NUDOS-version. (orig.)

  5. Development of a pressure based room acoustic model using impedance descriptions of surfaces

    DEFF Research Database (Denmark)

    Marbjerg, Gerd Høy; Brunskog, Jonas; Jeong, Cheol-Ho

    2013-01-01

    and acoustic radiosity will account for the diffuse reflections. This paper presents the motivation for the new model in the form of results in literature, which show the importance of retaining the angle dependence and phase information in reflections along with simple examples of angle dependent reflection......If a simulation tool is to be used for the optimization of absorbent ceilings, it is important that the simulation tool includes a good description of the surface. This study therefore aims at developing a model which can describe surfaces by their impedance values and not just by their statistical...... absorption coefficient, thus retaining the phase and the angle dependence. The approach of the proposed model will be to calculate the pressure impulse response using a combination of the image source method and acoustic radiosity. The image source method will account for the specular reflections...

  6. Some practical notes on the land surface modeling in the Tibetan Plateau

    Directory of Open Access Journals (Sweden)

    K. Yang

    2009-05-01

    Full Text Available The Tibetan Plateau is a key region of land-atmosphere interactions, as it provides an elevated heat source to the middle-troposphere. The Plateau surfaces are typically characterized by alpine meadows and grasslands in the central and eastern part while by alpine deserts in the western part. This study evaluates performance of three state-of-the-art land surface models (LSMs for the Plateau typical land surfaces. The LSMs of interest are SiB2 (the Simple Biosphere, CoLM (Common Land Model, and Noah. They are run at typical alpine meadow sites in the central Plateau and typical alpine desert sites in the western Plateau.

    The identified key processes and modeling issues are as follows. First, soil stratification is a typical phenomenon beneath the alpine meadows, with dense roots and soil organic matters within the topsoil, and it controls the profile of soil moisture in the central and eastern Plateau; all models, when using default parameters, significantly under-estimate the soil moisture within the topsoil. Second, a soil surface resistance controls the surface evaporation from the alpine deserts but it has not been reasonably modeled in LSMs; an advanced scheme for soil water flow is implemented in a LSM, based on which the soil resistance is determined from soil water content and meteorological conditions. Third, an excess resistance controls sensible heat fluxes from dry bare-soil or sparsely vegetated surfaces, and all LSMs significantly under-predict the ground-air temperature gradient, which would result in higher net radiation, lower soil heat fluxes and thus higher sensible heat fluxes in the models. A parameterization scheme for this resistance has been shown to be effective to remove these biases.

  7. A note on a model for quay crane scheduling with non-crossing constraints

    DEFF Research Database (Denmark)

    Santini, Alberto; Friberg, Henrik Alsing; Røpke, Stefan

    2015-01-01

    This article studies the quay crane scheduling problem with non-crossing constraints, which is an operational problem that arises in container terminals. An enhancement to a mixed integer programming model for the problem is proposed and a new class of valid inequalities is introduced. Computatio......This article studies the quay crane scheduling problem with non-crossing constraints, which is an operational problem that arises in container terminals. An enhancement to a mixed integer programming model for the problem is proposed and a new class of valid inequalities is introduced...

  8. Notes on the implementation of the IREQ model for the assessment of extreme cold environments.

    Science.gov (United States)

    Alfano, Francesca Romana d'Ambrosio; Palella, Boris Igor; Riccio, Giuseppe

    2013-01-01

    This paper has been devoted to the difficulties that practitioners, skilled ergonomists or occupational health experts could find in the assessment of cold environments by means of (insulation required) IREQ model at the base of the (International Standardization Organization) ISO 11079 Standard. The in-depth analysis discussed here has underlined several difficulties about: (a) the graphical calculation of the predicted limit exposures; (b) some differences in both IREQ and (duration limit exposure) DLE values reported in ISO 11079; and (c) some errors and incongruities in the program available online for the assessment of DLEs. These occurrences lead to the systematic overestimation of the DLE that exceed up to 4 h, those obtained by means of the figures reported in the Standard with the consequent unreliable assessment. Such matters justify the need to promote, in the whole scientific community involved in the ergonomics of the thermal environment, an in-depth discussion on the best practice to be followed for the assessment of extreme cold environments by means of IREQ model. Incongruities in IREQ model and errors in the code suggested by ISO 11079 Standard prevent a reliable assessment of cold environments with DLE systematically overestimated. Therefore IREQ model has been theoretically investigated trying to help both neophytes and skilled ergonomists on the best practice to be followed.

  9. Teaching Note--Incorporating Journal Clubs into Social Work Education: An Exploratory Model

    Science.gov (United States)

    Moore, Megan; Fawley-King, Kya; Stone, Susan I.; Accomazzo, Sarah M.

    2013-01-01

    This article outlines the implementation of a journal club for master's and doctoral social work students interested in mental health practice. It defines educational journal clubs and discusses the history of journal clubs in medical education and the applicability of the model to social work education. The feasibility of implementing…

  10. Utilizing uncoded consultation notes from electronic medical records for predictive modeling of colorectal cancer

    NARCIS (Netherlands)

    Hoogendoorn, Mark; Szolovits, Peter; Moons, Leon M G; Numans, ME

    2016-01-01

    OBJECTIVE: Machine learning techniques can be used to extract predictive models for diseases from electronic medical records (EMRs). However, the nature of EMRs makes it difficult to apply off-the-shelf machine learning techniques while still exploiting the rich content of the EMRs. In this paper,

  11. Selection of optimal complexity for ENSO-EMR model by minimum description length principle

    Science.gov (United States)

    Loskutov, E. M.; Mukhin, D.; Mukhina, A.; Gavrilov, A.; Kondrashov, D. A.; Feigin, A. M.

    2012-12-01

    One of the main problems arising in modeling of data taken from natural system is finding a phase space suitable for construction of the evolution operator model. Since we usually deal with strongly high-dimensional behavior, we are forced to construct a model working in some projection of system phase space corresponding to time scales of interest. Selection of optimal projection is non-trivial problem since there are many ways to reconstruct phase variables from given time series, especially in the case of a spatio-temporal data field. Actually, finding optimal projection is significant part of model selection, because, on the one hand, the transformation of data to some phase variables vector can be considered as a required component of the model. On the other hand, such an optimization of a phase space makes sense only in relation to the parametrization of the model we use, i.e. representation of evolution operator, so we should find an optimal structure of the model together with phase variables vector. In this paper we propose to use principle of minimal description length (Molkov et al., 2009) for selection models of optimal complexity. The proposed method is applied to optimization of Empirical Model Reduction (EMR) of ENSO phenomenon (Kravtsov et al. 2005, Kondrashov et. al., 2005). This model operates within a subset of leading EOFs constructed from spatio-temporal field of SST in Equatorial Pacific, and has a form of multi-level stochastic differential equations (SDE) with polynomial parameterization of the right-hand side. Optimal values for both the number of EOF, the order of polynomial and number of levels are estimated from the Equatorial Pacific SST dataset. References: Ya. Molkov, D. Mukhin, E. Loskutov, G. Fidelin and A. Feigin, Using the minimum description length principle for global reconstruction of dynamic systems from noisy time series, Phys. Rev. E, Vol. 80, P 046207, 2009 Kravtsov S, Kondrashov D, Ghil M, 2005: Multilevel regression

  12. A Note on the Bogdanov-Takens Bifurcation in the Romer Model with Learning by Doing

    Science.gov (United States)

    Bella, Giovanni

    This paper is aimed at describing the whole set of necessary and sufficient conditions for the emergence of multiple equilibria and global indeterminacy in the standard endogenous growth framework with learning by doing. The novelty of this paper relies on the application of the original Bogdanov-Takens bifurcation theorem, which allows us to characterize the full dynamics of the model, and determine the emergence of an unavoidable poverty trap.

  13. Technical Note: SWIFT - a fast semi-empirical model for polar stratospheric ozone loss

    Science.gov (United States)

    Rex, M.; Kremser, S.; Huck, P.; Bodeker, G.; Wohltmann, I.; Santee, M. L.; Bernath, P.

    2014-07-01

    An extremely fast model to estimate the degree of stratospheric ozone depletion during polar winters is described. It is based on a set of coupled differential equations that simulate the seasonal evolution of vortex-averaged hydrogen chloride (HCl), nitric acid (HNO3), chlorine nitrate (ClONO2), active forms of chlorine (ClOx = Cl + ClO + 2 ClOOCl) and ozone (O3) on isentropic levels within the polar vortices. Terms in these equations account for the chemical and physical processes driving the time rate of change of these species. Eight empirical fit coefficients associated with these terms are derived by iteratively fitting the equations to vortex-averaged satellite-based measurements of HCl, HNO3 and ClONO2 and observationally derived ozone loss rates. The system of differential equations is not stiff and can be solved with a time step of one day, allowing many years to be processed per second on a standard PC. The inputs required are the daily fractions of the vortex area covered by polar stratospheric clouds and the fractions of the vortex area exposed to sunlight. The resultant model, SWIFT (Semi-empirical Weighted Iterative Fit Technique), provides a fast yet accurate method to simulate ozone loss rates in polar regions. SWIFT's capabilities are demonstrated by comparing measured and modeled total ozone loss outside of the training period.

  14. A Methodological Note for the Development of Integrated Aquaculture Production Models

    Directory of Open Access Journals (Sweden)

    Stella Tsani

    2018-01-01

    Full Text Available Aquaculture production can yield significant economic, social, and environmental effects. These exceed the financial costs and benefits aquaculture producers are faced with. We propose a methodology for the development of integrated production models that allow for the inclusion of the socio-economic and environmental effects of aquaculture into the production management. The methodology develops on a Social Cost-Benefit Analysis context and it includes three parts: (i environmental, that captures the interactions of aquaculture with the environment, (ii economic, that makes provision for the incorporation of economic determinants in the production models and (iii social, that introduces the social preferences to the production and management process. Alternatives to address data availability issues are also discussed. The methodology extends the assessment of the costs and benefits of aquaculture beyond pure financial metrics and beyond the quantification of private costs and benefits. It can also support the development of integrated models of aquaculture production that take into consideration both the private and the social costs and benefits associated with externalities and effects not appropriately captured by market mechanisms. The methodology can support aquaculture management and policies targeting sustainable and efficient aquaculture production and financing from an economic, financial, social, and environmental point of view.

  15. Technical Note: High-resolution mineralogical database of dust-productive soils for atmospheric dust modeling

    Directory of Open Access Journals (Sweden)

    S. Nickovic

    2012-01-01

    Full Text Available Dust storms and associated mineral aerosol transport are driven primarily by meso- and synoptic-scale atmospheric processes. It is therefore essential that the dust aerosol process and background atmospheric conditions that drive dust emissions and atmospheric transport are represented with sufficiently well-resolved spatial and temporal features. The effects of airborne dust interactions with the environment determine the mineral composition of dust particles. The fractions of various minerals in aerosol are determined by the mineral composition of arid soils; therefore, a high-resolution specification of the mineral and physical properties of dust sources is needed.

    Several current dust atmospheric models simulate and predict the evolution of dust concentrations; however, in most cases, these models do not consider the fractions of minerals in the dust. The accumulated knowledge about the impacts of the mineral composition in dust on weather and climate processes emphasizes the importance of including minerals in modeling systems. Accordingly, in this study, we developed a global dataset consisting of the mineral composition of the current potentially dust-producing soils. In our study, we (a mapped mineral data to a high-resolution 30 s grid, (b included several mineral-carrying soil types in dust-productive regions that were not considered in previous studies, and (c included phosphorus.

  16. Preliminary site description: Groundwater flow simulations. Simpevarp area (version 1.1) modelled with CONNECTFLOW

    International Nuclear Information System (INIS)

    Hartley, Lee; Worth, David; Gylling, Bjoern; Marsic, Niko; Holmen, Johan

    2004-08-01

    The main objective of this study is to assess the role of known and unknown hydrogeological conditions for the present-day distribution of saline groundwater at the Simpevarp and Laxemar sites. An improved understanding of the paleo-hydrogeology is necessary in order to gain credibility for the Site Descriptive Model in general and the Site Hydrogeological Description in particular. This is to serve as a basis for describing the present hydrogeological conditions as well as predictions of future hydrogeological conditions. This objective implies a testing of: geometrical alternatives in the structural geology and bedrock fracturing, variants in the initial and boundary conditions, and parameter uncertainties (i.e. uncertainties in the hydraulic property assignment). This testing is necessary in order to evaluate the impact on the groundwater flow field of the specified components and to promote proposals of further investigations of the hydrogeological conditions at the site. The general methodology for modelling transient salt transport and groundwater flow using CONNECTFLOW that was developed for Forsmark has been applied successfully also for Simpevarp. Because of time constraints only a key set of variants were performed that focussed on the influences of DFN model parameters, the kinematic porosity, and the initial condition. Salinity data in deep boreholes available at the time of the project was too limited to allow a good calibration exercise. However, the model predictions are compared with the available data from KLX01 and KLX02 below. Once more salinity data is available it may be possible to draw more definite conclusions based on the differences between variants. At the moment though the differences should just be used understand the sensitivity of the models to various input parameters

  17. Modeling fuels and fire effects in 3D: Model description and applications

    Science.gov (United States)

    Francois Pimont; Russell Parsons; Eric Rigolot; Francois de Coligny; Jean-Luc Dupuy; Philippe Dreyfus; Rodman R. Linn

    2016-01-01

    Scientists and managers critically need ways to assess how fuel treatments alter fire behavior, yet few tools currently exist for this purpose.We present a spatially-explicit-fuel-modeling system, FuelManager, which models fuels, vegetation growth, fire behavior (using a physics-based model, FIRETEC), and fire effects. FuelManager's flexible approach facilitates...

  18. Modelling of nutrient partitioning in growing pigs to predict their anatomical body composition. 1. Model description

    NARCIS (Netherlands)

    Halas, V.; Dijkstra, J.; Babinszky, L.; Verstegen, M.W.A.; Gerrits, W.J.J.

    2004-01-01

    A dynamic mechanistic model was developed for growing and fattening pigs. The aim of the model was to predict growth rate and the chemical and anatomical body compositions from the digestible nutrient intake of gilts (20-105 kg live weight). The model represents the partitioning of digestible

  19. Power system models - A description of power markets and outline of market modelling in Wilmar

    International Nuclear Information System (INIS)

    Meibom, P.; Morthors, P.E.; Nielsen, L.H.; Weber, C.; Snader, K.; Swider, D.; Ravn, H.

    2003-12-01

    This report is Deliverable 3.2 of the Wilmar project. The report describes the power markets in the Nordic countries and Germany, together with the market models to be implemented in the Wilmar Planning model-ling tool developed in the project. (au)

  20. Editor's Note.

    Science.gov (United States)

    Alberts, Bruce

    2011-05-27

    The Research Article "A bacterium that can grow by using arsenic instead of phosphorus" by F. Wolfe-Simon et al., published online 2 December 2010, was the subject of extensive discussion and criticism following its online publication. Science received a wide range of correspondence that raised specific concerns about the Research Article's methods and interpretations. Eight Technical Comments that represent the main concerns, as well as a Technical Response by Wolfe-Simon et al., are published online in Science Express at the addresses listed in this note. They have been peer-reviewed and revised according to Science's standard procedure.

  1. A Description Of Space Relations In An NLP Model: The ABBYY Compreno Approach

    Directory of Open Access Journals (Sweden)

    Aleksey Leontyev

    2015-12-01

    Full Text Available The current paper is devoted to a formal analysis of the space category and, especially, to questions bound with the presentation of space relations in a formal NLP model. The aim is to demonstrate how linguistic and cognitive problems relating to spatial categorization, definition of spatial entities, and the expression of different locative senses in natural languages can be solved in an artificial intelligence system. We offer a description of the locative groups in the ABBYY Compreno formalism – an integral NLP framework applied for machine translation, semantic search, fact extraction, and other tasks based on the semantic analysis of texts. The model is based on a universal semantic hierarchy of the thesaurus type and includes a description of all possible semantic and syntactic links every word can attach. In this work we define the set of semantic locative relations between words, suggest different tools for their syntactic presentation, give formal restrictions for the word classes that can denote spaces, and show different strategies of dealing with locative prepositions, especially as far as the problem of their machine translation is concerned.

  2. Normative and descriptive models of decision making: time discounting and risk sensitivity.

    Science.gov (United States)

    Kacelnik, A

    1997-01-01

    The task of evolutionary psychologists is to produce precise predictions about psychological mechanisms using adaptationist thinking. This can be done combining normative models derived from evolutionary hypotheses with descriptive regularities across species found by experimental psychologists and behavioural ecologists. I discuss two examples. In temporal discounting, a normative model (exponential) fails while a descriptive one (hyperbolic) fits both human and non-human data. In non-humans hyperbolic discounting coincides with rate of gain maximization in repetitive choices. Humans may discount hyperbolically in non-repetitive choices because they treat them as a repetitive rate-maximizing problem. In risk sensitivity, a theory derived from fitness considerations produces inconclusive results in non-humans, but succeeds in predicting human risk proneness and risk aversion for both the amount and delay of reward in a computer game. Strikingly, and in contrast with the existing literature, risk aversion for delay occurs as predicted. The predictions of risk aversion for delay may fail in many animal experiments because the manipulations of the utility function are not appropriate. In temporal discounting animal experiments help the interpretation of human results, while in risk sensitivity studies human results help the analysis of non-human data.

  3. Description of bipolar charge transport in polyethylene using a fluid model with a constant mobility: model prediction

    International Nuclear Information System (INIS)

    Le Roy, S; Segur, P; Teyssedre, G; Laurent, C

    2004-01-01

    We present a conduction model aimed at describing bipolar transport and space charge phenomena in low density polyethylene under dc stress. In the first part we recall the basic requirements for the description of charge transport and charge storage in disordered media with emphasis on the case of polyethylene. A quick review of available conduction models is presented and our approach is compared with these models. Then, the bases of the model are described and related assumptions are discussed. Finally, results on external current, trapped and free space charge distributions, field distribution and recombination rate are presented and discussed, considering a constant dc voltage, a step-increase of the voltage, and a polarization-depolarization protocol for the applied voltage. It is shown that the model is able to describe the general features reported for external current, electroluminescence and charge distribution in polyethylene

  4. A note on a boundary sine-Gordon model at the free-Fermion point

    Science.gov (United States)

    Murgan, Rajan

    2018-02-01

    We investigate the free-Fermion point of a boundary sine-Gordon model with nondiagonal boundary interactions for the ground state using auxiliary functions obtained from T  -  Q equations of a corresponding inhomogeneous open spin-\\frac{1}{2} XXZ chain with nondiagonal boundary terms. In particular, we obtain the Casimir energy. Our result for the Casimir energy is shown to agree with the result from the TBA approach. The analytical result for the effective central charge in the ultraviolet (UV) limit is also verified from the plots of effective central charge for intermediate values of volume.

  5. Note: Gaussian mixture model for event recognition in optical time-domain reflectometry based sensing systems.

    Science.gov (United States)

    Fedorov, A K; Anufriev, M N; Zhirnov, A A; Stepanov, K V; Nesterov, E T; Namiot, D E; Karasik, V E; Pnev, A B

    2016-03-01

    We propose a novel approach to the recognition of particular classes of non-conventional events in signals from phase-sensitive optical time-domain-reflectometry-based sensors. Our algorithmic solution has two main features: filtering aimed at the de-nosing of signals and a Gaussian mixture model to cluster them. We test the proposed algorithm using experimentally measured signals. The results show that two classes of events can be distinguished with the best-case recognition probability close to 0.9 at sufficient numbers of training samples.

  6. A first proposal for a general description model of forensic traces

    Science.gov (United States)

    Lindauer, Ina; Schäler, Martin; Vielhauer, Claus; Saake, Gunter; Hildebrandt, Mario

    2012-06-01

    In recent years, the amount of digitally captured traces at crime scenes increased rapidly. There are various kinds of such traces, like pick marks on locks, latent fingerprints on various surfaces as well as different micro traces. Those traces are different from each other not only in kind but also in which information they provide. Every kind of trace has its own properties (e.g., minutiae for fingerprints, or raking traces for locks) but there are also large amounts of metadata which all traces have in common like location, time and other additional information in relation to crime scenes. For selected types of crime scene traces, type-specific databases already exist, such as the ViCLAS for sexual offences, the IBIS for ballistic forensics or the AFIS for fingerprints. These existing forensic databases strongly differ in the trace description models. For forensic experts it would be beneficial to work with only one database capable of handling all possible forensic traces acquired at a crime scene. This is especially the case when different kinds of traces are interrelated (e.g., fingerprints and ballistic marks on a bullet casing). Unfortunately, current research on interrelated traces as well as general forensic data models and structures is not mature enough to build such an encompassing forensic database. Nevertheless, recent advances in the field of contact-less scanning make it possible to acquire different kinds of traces with the same device. Therefore the data of these traces is structured similarly what simplifies the design of a general forensic data model for different kinds of traces. In this paper we introduce a first common description model for different forensic trace types. Furthermore, we apply for selected trace types from the well established database schema development process the phases of transferring expert knowledge in the corresponding forensic fields into an extendible, database-driven, generalised forensic description model. The

  7. Mouth-clicks used by blind expert human echolocators - signal description and model based signal synthesis.

    Directory of Open Access Journals (Sweden)

    Lore Thaler

    2017-08-01

    Full Text Available Echolocation is the ability to use sound-echoes to infer spatial information about the environment. Some blind people have developed extraordinary proficiency in echolocation using mouth-clicks. The first step of human biosonar is the transmission (mouth click and subsequent reception of the resultant sound through the ear. Existing head-related transfer function (HRTF data bases provide descriptions of reception of the resultant sound. For the current report, we collected a large database of click emissions with three blind people expertly trained in echolocation, which allowed us to perform unprecedented analyses. Specifically, the current report provides the first ever description of the spatial distribution (i.e. beam pattern of human expert echolocation transmissions, as well as spectro-temporal descriptions at a level of detail not available before. Our data show that transmission levels are fairly constant within a 60° cone emanating from the mouth, but levels drop gradually at further angles, more than for speech. In terms of spectro-temporal features, our data show that emissions are consistently very brief (~3ms duration with peak frequencies 2-4kHz, but with energy also at 10kHz. This differs from previous reports of durations 3-15ms and peak frequencies 2-8kHz, which were based on less detailed measurements. Based on our measurements we propose to model transmissions as sum of monotones modulated by a decaying exponential, with angular attenuation by a modified cardioid. We provide model parameters for each echolocator. These results are a step towards developing computational models of human biosonar. For example, in bats, spatial and spectro-temporal features of emissions have been used to derive and test model based hypotheses about behaviour. The data we present here suggest similar research opportunities within the context of human echolocation. Relatedly, the data are a basis to develop synthetic models of human echolocation

  8. Technical note: Modeling primate occlusal topography using geographic information systems technology.

    Science.gov (United States)

    Zuccotti, L F; Williamson, M D; Limp, W F; Ungar, P S

    1998-09-01

    Most functional analyses of primate tooth form have been limited to linear or area measurements. Such studies have offered but a limited glimpse at differences in occlusal relief among taxa. Such differences in dental topography may relate to tooth function and, so, have considerable implications for the inference of diet from fossil teeth. In this article, we describe a technique to model and compare primate molars in three dimensions using Geographic Resources Analysis Support System (GRASS) software. We examine unworn lower second molars of three extant hominoids with known differences in diet (Gorilla gorilla, Pan troglodytes, and Pongo pygmaeus), and two fossil forms, (Afropithecus turkanesis and Dryopithecus laietanus). First, we obtained approximately 400 landmarks on the occlusal surfaces of each tooth using an electromagnetic digitizer. Raster "terrain models" of occlusal surfaces were then created by interpolation of the coordinate data. We used GRASS terrain analysis automated techniques to quantify the volumes and slopes of individual cusps. We also used the GRASS watershed technique to identify the volume of liquid that would accumulate in each tooth's basin (a measure of basin area), and the directions and intensity of drainage over the occlusal surface. In sum, GRASS shows considerable potential for the characterization and comparison of tooth surfaces. Furthermore, techniques described here are not limited to the study of teeth, but may be broadly applicable to studies of skulls, joints, and other biological structures.

  9. NOTE: Haemodynamic resistance model of monochorionic twin pregnancies complicated by acardiac twinning

    Science.gov (United States)

    Umur, Asli; van Gemert, Martin J. C.; van den Wijngaard, Jeroen P. H. M.; Ross, Michael G.; Nikkels, Peter G. J.

    2004-07-01

    An acardiac twin is a severely malformed monochorionic twin fetus that lacks most organs, particularly a heart. It grows during pregnancy, because it is perfused by its developmentally normal co-twin (called the pump twin) via a set of placental arterioarterial and venovenous anastomoses. The pump twin dies intrauterine or neonatally in about 50% of the cases due to congestive heart failure, polyhydramnios and prematurity. Because the pathophysiology of this pregnancy is currently incompletely understood, we modified our previous haemodynamic model of monochorionic twins connected by placental vascular anastomoses to include the analysis of acardiac twin pregnancies. We incorporated the fetoplacental circulation as a resistance circuit and used the fetal umbilical flow that perfuses the body to define fetal growth, rather than the placental flow as done previously. Using this modified model, we predicted that the pump twin has excess blood volume and increased mean arterial blood pressure compared to those in the acardiac twin. Placental perfusion of the acardiac twin is significantly reduced compared to normal, as a consequence of an increased venous pressure, possibly implying reduced acardiac placental growth. In conclusion, the haemodynamic analysis may contribute to an increased knowledge of the pathophysiologic consequences of an acardiac body mass for the pump twin.

  10. International Nuclear Model. Volume 3. Program description. Appendix A-H (Part 1)

    International Nuclear Information System (INIS)

    Andress, D.

    1985-01-01

    The International Nuclear Model (INM) is a comprehensive model of the commercial nuclear power industry. It simulates economic decisions for reactor deployment and fuel management decisions based on an input set of technical, economic and scenario parameters. The technical parameters include reactor operating characteristics, fuel cycle timing and mass loss factors, and enrichment tails assays. Economic parameters include fuel cycle costs, financial data, and tax alternatives. INM has a broad range of scenario options covering, for example, process constraints, interregional activities, reprocessing, and fuel management selection. INM reports reactor deployment schedules, electricity generation, and fuel cycle requirements and costs. It also has specialized reports for extended burnup and permanent disposal. This volume contains appendices A through H including a description of subroutines and the Fortran listing of the program

  11. Free-fermion descriptions of parafermion chains and string-net models

    Science.gov (United States)

    Meichanetzidis, Konstantinos; Turner, Christopher J.; Farjami, Ashk; Papić, Zlatko; Pachos, Jiannis K.

    2018-03-01

    Topological phases of matter remain a focus of interest due to their unique properties: fractionalization, ground-state degeneracy, and exotic excitations. While some of these properties can occur in systems of free fermions, their emergence is generally associated with interactions between particles. Here, we quantify the role of interactions in general classes of topological states of matter in one and two spatial dimensions, including parafermion chains and string-net models. Surprisingly, we find that certain topological states can be exactly described by free fermions, while others saturate the maximum possible distance from their optimal free-fermion description [C. J. Turner et al., Nat. Commun. 8, 14926 (2017), 10.1038/ncomms14926]. Our work opens the door to understanding the complexity of topological models by establishing new types of fermionization procedures to describe their low-energy physics, thus making them amenable to experimental realizations.

  12. Robust Transmission of Speech LSFs Using Hidden Markov Model-Based Multiple Description Index Assignments

    Directory of Open Access Journals (Sweden)

    Rondeau Paul

    2008-01-01

    Full Text Available Speech coding techniques capable of generating encoded representations which are robust against channel losses play an important role in enabling reliable voice communication over packet networks and mobile wireless systems. In this paper, we investigate the use of multiple description index assignments (MDIAs for loss-tolerant transmission of line spectral frequency (LSF coefficients, typically generated by state-of-the-art speech coders. We propose a simulated annealing-based approach for optimizing MDIAs for Markov-model-based decoders which exploit inter- and intraframe correlations in LSF coefficients to reconstruct the quantized LSFs from coded bit streams corrupted by channel losses. Experimental results are presented which compare the performance of a number of novel LSF transmission schemes. These results clearly demonstrate that Markov-model-based decoders, when used in conjunction with optimized MDIA, can yield average spectral distortion much lower than that produced by methods such as interleaving/interpolation, commonly used to combat the packet losses.

  13. Robust Transmission of Speech LSFs Using Hidden Markov Model-Based Multiple Description Index Assignments

    Directory of Open Access Journals (Sweden)

    Pradeepa Yahampath

    2008-03-01

    Full Text Available Speech coding techniques capable of generating encoded representations which are robust against channel losses play an important role in enabling reliable voice communication over packet networks and mobile wireless systems. In this paper, we investigate the use of multiple description index assignments (MDIAs for loss-tolerant transmission of line spectral frequency (LSF coefficients, typically generated by state-of-the-art speech coders. We propose a simulated annealing-based approach for optimizing MDIAs for Markov-model-based decoders which exploit inter- and intraframe correlations in LSF coefficients to reconstruct the quantized LSFs from coded bit streams corrupted by channel losses. Experimental results are presented which compare the performance of a number of novel LSF transmission schemes. These results clearly demonstrate that Markov-model-based decoders, when used in conjunction with optimized MDIA, can yield average spectral distortion much lower than that produced by methods such as interleaving/interpolation, commonly used to combat the packet losses.

  14. HIGHWAY, a transportation routing model: program description and revised users' manual

    International Nuclear Information System (INIS)

    Joy, D.S.; Johnson, P.E.

    1983-10-01

    A computerized transportation routing model has been developed at the Oak Ridge National Laboratory to be used for predicting likely routes for shipping radioactive materials. The HIGHWAY data base is a computerized road atlas containing descriptions of the entire Interstate System, the federal highway system, and most of the principal state roads. In addition to its prediction of the most likely commercial route, options incorporated in the HIGHWAY model can allow for maximum use of Interstate highways or routes that will bypass urbanized areas containing populations greater than 100,000 persons. The user may also interactively modify the data base to predict routes that bypass any particular state, city, town, or specific highway segment

  15. A qualitative descriptive study of spirituality guided by the Neuman systems model.

    Science.gov (United States)

    Lowry, Lois W

    2012-10-01

    The purposes of this qualitative descriptive study were to explore the meaning of spirituality as described by aging adults in various states of health, to describe the relationship between spirituality and health, and to explain client expectations for healthcare providers related to spirituality. All identified meanings and themes were compared to the characteristics of spirituality proposed by Betty Neuman in the Neuman systems model to determine the credibility of the model for assessing and guiding holistic nursing practice. Three themes were formulated: a) Spirituality is an individual, conscious, committed connection to God, requiring a human response; b) positive spirituality contributes to personal wholeness and health; and c) spirituality sustains and comforts in times of stress.

  16. Experimental methods and modeling techniques for description of cell population heterogeneity

    DEFF Research Database (Denmark)

    Lencastre Fernandes, Rita; Nierychlo, M.; Lundin, L.

    2011-01-01

    With the continuous development, in the last decades, of analytical techniques providing complex information at single cell level, the study of cell heterogeneity has been the focus of several research projects within analytical biotechnology. Nonetheless, the complex interplay between...... environmental changes and cellular responses is yet not fully understood, and the integration of this new knowledge into the strategies for design, operation and control of bioprocesses is far from being an established reality. Indeed, the impact of cell heterogeneity on productivity of large scale cultivations...... methods for monitoring cell population heterogeneity as well as model frameworks suitable for describing dynamic heterogeneous cell populations. We will furthermore underline the highly important coordination between experimental and modeling efforts necessary to attain a reliable quantitative description...

  17. Venturing into SPASE; Applying the SPASE Data Model to Data Description

    Science.gov (United States)

    Thieman, J.; King, T.; Roberts, A.; King, J. H.

    2005-12-01

    The Space Physics Archive Search and Extract (SPASE) Project is a NASA-funded, collaborative development effort among multi-institution, international, space physics data holding organizations intended to allow science users to interoperably locate space physics data of interest, intercompare the information about data, and retrieve selected data sets or portions of data sets. The SPASE Data Model (see http://www.igpp.ucla.edu/spase/) has been developed to provide a common metadata language for searching across the multitude of disparate space physics data archives for data of interest. The group is working to make the data set description process more automated for data providers. SPASE is intended to facilitate intercomparison of search results by displaying results using common time or location formats. The SPASE model supports data descriptions at multiple levels of detail allowing providers to describe their holdings in a way that supports access of selected parts of data sets if that is enabled for the user. We are working with the Virtual Space Physics Observatory and other Virtual Observatories and data centers relevant to space physics to provide a common approach to data searching, access, and retrieval across multiple disciplines. We will provide examples of the application of the SPASE model to data of interest and show some of the problems and practices associated with this process. Development of an effective data model and data retrieval process is challenging and requires feedback from all sectors of the community. We welcome new participants and feedback from the scientific and technical data community on the best approaches to assuring preservation and continued usage of our data repositories into the future.

  18. The sufferer as model in photojournalism: notes on the limit of identity

    Directory of Open Access Journals (Sweden)

    Angie Biondi

    2011-06-01

    Full Text Available Suffering has been caused by press photographs ever since the start of Modern times. Sufferers in galleries exhibit the marks of their misfortunes as a legitimate record of wars, attempts, diseases. Anchored on an acute indicial character, such images also constitute and intensify a complex field of visibility in which disputes and access or placement pacts come into action. The purpose of this text is to discuss the means for turning suffering into a classificationin which it associates the sufferer with a condition of belonging. Thus, tied to an identity, body and expression would serve solelythe conformation of an ethos, as an exemplary model of personage. In order to describe these strategies, we seek to reflect on affective experiences in this universe of images from the perspective of apossible encounter with what is singular, with any one subject, which is brought about by image.

  19. A Note on the Fundamental Theorem of Asset Pricing under Model Uncertainty

    Directory of Open Access Journals (Sweden)

    Erhan Bayraktar

    2014-10-01

    Full Text Available We show that the recent results on the Fundamental Theorem of Asset Pricing and the super-hedging theorem in the context of model uncertainty can be extended to the case in which the options available for static hedging (hedging options are quoted with bid-ask spreads. In this set-up, we need to work with the notion of robust no-arbitrage which turns out to be equivalent to no-arbitrage under the additional assumption that hedging options with non-zero spread are non-redundant. A key result is the closedness of the set of attainable claims, which requires a new proof in our setting.

  20. Thermal modelling. Preliminary site description. Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, Jan; Back, Paer-Erik; Bengtsson, Anna; Laendell, Maerta [Geo Innova AB, Linkoeping (Sweden)

    2005-08-01

    This report presents the thermal site descriptive model for the Forsmark area, version 1.2. The main objective of this report is to present the thermal modelling work where data has been identified, quality controlled, evaluated and summarised in order to make an upscaling to lithological domain level possible. The thermal conductivity at canister scale has been modelled for two different lithological domains (RFM029 and RFM012, both dominated by granite to granodiorite (101057)). A main modelling approach has been used to determine the mean value of the thermal conductivity. Two alternative/complementary approaches have been used to evaluate the spatial variability of the thermal conductivity at domain level. The thermal modelling approaches are based on the lithological model for the Forsmark area, version 1.2 together with rock type models constituted from measured and calculated (from mineral composition) thermal conductivities. Results indicate that the mean of thermal conductivity is expected to exhibit a small variation between the different domains, 3.46 W/(mxK) for RFM012 to 3.55 W/(mxK) for RFM029. The spatial distribution of the thermal conductivity does not follow a simple model. Lower and upper 95% confidence limits are based on the modelling results, but have been rounded of to only two significant figures. Consequently, the lower limit is 2.9 W/(mxK), while the upper is 3.8 W/(mxK). This is applicable to both the investigated domains. The temperature dependence is rather small with a decrease in thermal conductivity of 10.0% per 100 deg C increase in temperature for the dominating rock type. There are a number of important uncertainties associated with these results. One of the uncertainties considers the representative scale for the canister. Another important uncertainty is the methodological uncertainties associated with the upscaling of thermal conductivity from cm-scale to canister scale. In addition, the representativeness of rock samples is

  1. FCJ-131 Pervasive Computing and Prosopopoietic ModellingNotes on computed function and creative action

    Directory of Open Access Journals (Sweden)

    Anders Michelsen

    2011-12-01

    Full Text Available This article treats the philosophical underpinnings of the notions of ubiquity and pervasive computing from a historical perspective. The current focus on these notions reflects the ever increasing impact of new media and the underlying complexity of computed function in the broad sense of ICT that have spread vertiginiously since Mark Weiser coined the term ‘pervasive’, e.g., digitalised sensoring, monitoring, effectuation, intelligence, and display. Whereas Weiser’s original perspective may seem fulfilled since computing is everywhere, in his and Seely Brown’s (1997 terms, ‘invisible’, on the horizon, ’calm’, it also points to a much more important and slightly different perspective: that of creative action upon novel forms of artifice. Most importantly for this article, ubiquity and pervasive computing is seen to point to the continuous existence throughout the computational heritage since the mid-20th century of a paradoxical distinction/complicity between the technical organisation of computed function and the human Being, in the sense of creative action upon such function. This paradoxical distinction/complicity promotes a chiastic (Merleau-Ponty relationship of extension of one into the other. It also indicates a generative creation that itself points to important issues of ontology with methodological implications for the design of computing. In this article these implications will be conceptualised as prosopopoietic modeling on the basis of Bernward Joerges introduction of the classical rhetoric term of ’prosopopoeia’ into the debate on large technological systems. First, the paper introduces the paradoxical distinction/complicity by debating Gilbert Simondon’s notion of a ‘margin of indeterminacy’ vis-a-vis computing. Second, it debates the idea of prosopopoietic modeling, pointing to a principal role of the paradoxical distinction/complicity within the computational heritage in three cases: a. Prosopopoietic

  2. Consistent model reduction of polymer chains in solution in dissipative particle dynamics: Model description

    KAUST Repository

    Moreno Chaparro, Nicolas

    2015-06-30

    We introduce a framework for model reduction of polymer chain models for dissipative particle dynamics (DPD) simulations, where the properties governing the phase equilibria such as the characteristic size of the chain, compressibility, density, and temperature are preserved. The proposed methodology reduces the number of degrees of freedom required in traditional DPD representations to model equilibrium properties of systems with complex molecules (e.g., linear polymers). Based on geometrical considerations we explicitly account for the correlation between beads in fine-grained DPD models and consistently represent the effect of these correlations in a reduced model, in a practical and simple fashion via power laws and the consistent scaling of the simulation parameters. In order to satisfy the geometrical constraints in the reduced model we introduce bond-angle potentials that account for the changes in the chain free energy after the model reduction. Following this coarse-graining process we represent high molecular weight DPD chains (i.e., ≥200≥200 beads per chain) with a significant reduction in the number of particles required (i.e., ≥20≥20 times the original system). We show that our methodology has potential applications modeling systems of high molecular weight molecules at large scales, such as diblock copolymer and DNA.

  3. Ecohydrodynamic model of the Baltic Sea. Part 1. Description of the ProDeMo model

    Directory of Open Access Journals (Sweden)

    Bogdan Ołdakowski

    2005-12-01

    Full Text Available The ProDeMo (Production and Destruction of Organic Matter Model, a 3D coupled hydrodynamic-ecological model, was formulated and applied to the whole Baltic Sea and the subregion of the Gulf of Gdansk. It describes nutrient cycles (phosphorus, nitrogen, silicon through the food web with 15 state variables, oxygen conditions and the parameterisation of water-sediment interactions. The present version of the model takes two groups of phytoplankton - diatoms and non-diatoms - as well as zooplankton into consideration. It covers the flow of matter and energy in the sea, including river discharges and atmospheric deposition. Numerical applications are embedded on a 1 NM grid for the Gulf of Gdansk and a 5 NM grid for the Baltic Sea.     Since the model results largely concur with observations, the model can be regarded as a reliable tool for analysing the behaviour of the Baltic ecosystem. Some examples of the spatial-temporal variability of the most important biological and chemical parameters are presented. The model results are compared with those of other modelling research in the Baltic Sea.     Both the ProDeMo model algorithm and its computing procedures need to be further developed. The next version should therefore enable more phytoplankton groups to be defined, for example cyanobacteria, which are able to take up molecular nitrogen from the atmosphere (nitrogen fixation. Additionally, the sediment phase should be divided into active and non-active layers.

  4. Effective-gluon model description of inclusive meson production in π+- p and pp collisions

    International Nuclear Information System (INIS)

    Look, G.W.; Fischbach, E.

    1977-01-01

    The recently introduced effective-gluon (EG) model is applied to inclusive meson production at large transverse momentum (p/sub t)/from π +- p and pp interactions. In the EG model the dependence of the inclusive differential cross section on p/ sub t/ and center-of-momentum energy √s is characterized by a single universal constant B = 18 GeV 2 ; this constant is obtained by fitting to the inclusive data for pp → cX with c = π +- π 0 , K +- p, and p-bar. Since the EG model requires that the inclusive differential cross sections for π +- p → X/should be characterized by the same constant B, the dependence of these cross sections on p/sub t/and √s should follow from the previous analysis of pp → cX without the introduction of any additional parameters. The only new information required is the form of the momentum distribution function for partons in the incident pion. Several models for this function are considered and it it shown that all of the alternatives lead to approximately the same predictions. Comparison of theory and experiment indicates that the EG model description of the recent Fermilab data of Donaldson et al. is good to approximately 15--20 % per data point over a range of more than 10 5 in the magnitude of the inclusive cross section

  5. Incorporating social groups' responses in a descriptive model for second- and higher-order impact identification

    International Nuclear Information System (INIS)

    Sutheerawatthana, Pitch; Minato, Takayuki

    2010-01-01

    The response of a social group is a missing element in the formal impact assessment model. Previous discussion of the involvement of social groups in an intervention has mainly focused on the formation of the intervention. This article discusses the involvement of social groups in a different way. A descriptive model is proposed by incorporating a social group's response into the concept of second- and higher-order effects. The model is developed based on a cause-effect relationship through the observation of phenomena in case studies. The model clarifies the process by which social groups interact with a lower-order effect and then generate a higher-order effect in an iterative manner. This study classifies social groups' responses into three forms-opposing, modifying, and advantage-taking action-and places them in six pathways. The model is expected to be used as an analytical tool for investigating and identifying impacts in the planning stage and as a framework for monitoring social groups' responses during the implementation stage of a policy, plan, program, or project (PPPPs).

  6. Fast Running Urban Dispersion Model for Radiological Dispersal Device (RDD) Releases: Model Description and Validation

    Energy Technology Data Exchange (ETDEWEB)

    Gowardhan, Akshay [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). National Atmospheric Release Advisory Center (NARAC); Neuscamman, Stephanie [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). National Atmospheric Release Advisory Center (NARAC); Donetti, John [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). National Atmospheric Release Advisory Center (NARAC); Walker, Hoyt [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). National Atmospheric Release Advisory Center (NARAC); Belles, Rich [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). National Atmospheric Release Advisory Center (NARAC); Eme, Bill [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). National Atmospheric Release Advisory Center (NARAC); Homann, Steven [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). National Atmospheric Release Advisory Center (NARAC); Simpson, Matthew [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). National Atmospheric Release Advisory Center (NARAC); Nasstrom, John [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States). National Atmospheric Release Advisory Center (NARAC)

    2017-05-24

    Aeolus is an efficient three-dimensional computational fluid dynamics code based on finite volume method developed for predicting transport and dispersion of contaminants in a complex urban area. It solves the time dependent incompressible Navier-Stokes equation on a regular Cartesian staggered grid using a fractional step method. It also solves a scalar transport equation for temperature and using the Boussinesq approximation. The model also includes a Lagrangian dispersion model for predicting the transport and dispersion of atmospheric contaminants. The model can be run in an efficient Reynolds Average Navier-Stokes (RANS) mode with a run time of several minutes, or a more detailed Large Eddy Simulation (LES) mode with run time of hours for a typical simulation. This report describes the model components, including details on the physics models used in the code, as well as several model validation efforts. Aeolus wind and dispersion predictions are compared to field data from the Joint Urban Field Trials 2003 conducted in Oklahoma City (Allwine et al 2004) including both continuous and instantaneous releases. Newly implemented Aeolus capabilities include a decay chain model and an explosive Radiological Dispersal Device (RDD) source term; these capabilities are described. Aeolus predictions using the buoyant explosive RDD source are validated against two experimental data sets: the Green Field explosive cloud rise experiments conducted in Israel (Sharon et al 2012) and the Full-Scale RDD Field Trials conducted in Canada (Green et al 2016).

  7. Discovering subgroups using descriptive models of adverse outcomes in medical care.

    Science.gov (United States)

    Stiglic, Gregor; Kokol, P

    2012-01-01

    Hospital discharge databases store hundreds of thousands of patients. These datasets are usually used by health insurance companies to process claims from hospitals, but they also represent a rich source of information about the patterns of medical care. The proposed subgroup discovery method aims to improve the efficiency of detecting interpretable subgroups in data. Supervised descriptive rule discovery techniques can prove inefficient in cases when target class samples represent only an extremely small amount of all available samples. Our approach aims to balance the number of samples in target and control groups prior to subgroup discovery process. Additionally, we introduce some improvements to an existing subgroup discovery algorithm enhancing the user experience and making the descriptive data mining process and visualization of rules more user friendly. Instance-based subspace subgroup discovery introduced in this paper is demonstrated on hospital discharge data with focus on medical errors. In general, the number of patients with a recorded diagnosis related to a medical error is relatively small in comparison to patients where medical errors did not occur. The ability to produce comprehensible and simple models with high degree of confidence, support, and predictive power using the proposed method is demonstrated. This paper introduces a subspace subgroup discovery process that can be applied in all settings where a large number of samples with relatively small number of target class samples are present. The proposed method is implemented in Weka machine learning environment and is available at http://ri.fzv.uni-mb.si/ssd.

  8. Note & Recensioni

    OpenAIRE

    2014-01-01

    VolumiVito Campanelli, Web Aesthetics. How Digital Media Affect Culture and Society; Id., Remix It Yourself. Analisi socio-estetica delle forme comunicative del Web [Emanuele Crescimanno] • Jean-François Bordron, Image et vérité. Essais sur les dimensions iconiques de la connaissance [Veronica Estay Stange] • Stéphane Dumas, Les peaux créatrices – Esthétique de la sécrétion [Marc-Vincent Howlett]NoteQuidam veritatis effectus. A proposito di A Plea for Balance in Philosophy. Essays in honour o...

  9. Lecture Notes

    DEFF Research Database (Denmark)

    Bak, Thomas

    This note discusses multi-sensor fusion. Through sensor fusion we may combine readings from different sensors, remove inconsistencies and combine the information into one coherent structure. This kind of processing is a fundamental feature of all animal and human navigation, where multiple...... information sources such as vision, hearing and balance are combined to determine position and plan a path to a goal. While the concept of data fusion is not new, the emergence of new sensors, advanced processing techniques, and improved processing hardware make real-time fusion of data increasingly possible...... interface. Sensor fusion seeks to overcome the drawbacks of current sensor technology by combining information from many independent sources of limited accuracy and reliability to give information of better accuracy and reliability. This makes the system less vulnerable to failures of a single component...

  10. THE BASIS OF MATHEMATICAL DESCRIPTION FOR WAVE MODEL OF STRESSES PROPAGATION IN RAILWAY TRACK

    Directory of Open Access Journals (Sweden)

    D. M. Kurhan

    2016-10-01

    Full Text Available Purpose. Modern scientific research has repeatedly cited practical examples of the dynamic effects of railway track operation that go beyond the static calculation schemes. For the track sections where the train speed is approaching to the velocity of wave propagation in the slab track layers such issues are of particular relevance. An adequate tool for the study of such issues can be the use of the wave theory of stress propagation. The purpose of the article is the creation of a mathematical description of the basic principles of the stress propagation wave model in the railway track, which can be used as a basis for the practical development of the relevant calculation system. Methodology. The model of stress-strain states of the railway track on the basis of the stress wave propagation theory is to bring together the equations of the geometry of the outline of the space systems that is involved in the interaction at a given time, and the dynamic equilibrium equations of deformation. The solution is based on the use of the laws of the theory of elasticity. The wave front is described by an ellipsoid equation. When determining the variation in time of the surface position of the ellipsoid a vector approach is used. Findings. The geometry equations of the wave motion determine the volumes of material layers of the slab track involved in the interaction at a given time. The dynamic equilibrium determination of the deformed condition of the space bounded by the wave front makes it possible to calculate both the stresses and strains, and their changes during the time of the load perception. Thus, mathematical descriptions of the processes that occur in the perception of the load by the elements of railway track at high speeds were obtained. Originality. The simulation tasks of the track and rolling stock interaction, in particular taking into account the dynamic deflection of slab track were further developed. For the first time the article

  11. The Potsdam Parallel Ice Sheet Model (PISM-PIK – Part 1: Model description

    Directory of Open Access Journals (Sweden)

    R. Winkelmann

    2011-09-01

    Full Text Available We present the Potsdam Parallel Ice Sheet Model (PISM-PIK, developed at the Potsdam Institute for Climate Impact Research to be used for simulations of large-scale ice sheet-shelf systems. It is derived from the Parallel Ice Sheet Model (Bueler and Brown, 2009. Velocities are calculated by superposition of two shallow stress balance approximations within the entire ice covered region: the shallow ice approximation (SIA is dominant in grounded regions and accounts for shear deformation parallel to the geoid. The plug-flow type shallow shelf approximation (SSA dominates the velocity field in ice shelf regions and serves as a basal sliding velocity in grounded regions. Ice streams can be identified diagnostically as regions with a significant contribution of membrane stresses to the local momentum balance. All lateral boundaries in PISM-PIK are free to evolve, including the grounding line and ice fronts. Ice shelf margins in particular are modeled using Neumann boundary conditions for the SSA equations, reflecting a hydrostatic stress imbalance along the vertical calving face. The ice front position is modeled using a subgrid-scale representation of calving front motion (Albrecht et al., 2011 and a physically-motivated calving law based on horizontal spreading rates. The model is tested in experiments from the Marine Ice Sheet Model Intercomparison Project (MISMIP. A dynamic equilibrium simulation of Antarctica under present-day conditions is presented in Martin et al. (2011.

  12. A regional climate model for northern Europe: model description and results from the downscaling of two GCM control simulations

    Science.gov (United States)

    Rummukainen, M.; Räisänen, J.; Bringfelt, B.; Ullerstig, A.; Omstedt, A.; Willén, U.; Hansson, U.; Jones, C.

    This work presents a regional climate model, the Rossby Centre regional Atmospheric model (RCA1), recently developed from the High Resolution Limited Area Model (HIRLAM). The changes in the HIRLAM parametrizations, necessary for climate-length integrations, are described. A regional Baltic Sea ocean model and a modeling system for the Nordic inland lake systems have been coupled with RCA1. The coupled system has been used to downscale 10-year time slices from two different general circulation model (GCM) simulations to provide high-resolution regional interpretation of large-scale modeling. A selection of the results from the control runs, i.e. the present-day climate simulations, are presented: large-scale free atmospheric fields, the surface temperature and precipitation results and results for the on-line simulated regional ocean and lake surface climates. The regional model modifies the surface climate description compared to the GCM simulations, but it is also substantially affected by the biases in the GCM simulations. The regional model also improves the representation of the regional ocean and the inland lakes, compared to the GCM results.

  13. A regional climate model for northern Europe: model description and results from the downscaling of two GCM control simulations

    Energy Technology Data Exchange (ETDEWEB)

    Rummukainen, M.; Raeisaenen, J.; Bringfelt, B.; Ullerstig, A.; Omstedt, A.; Willen, U.; Hansson, U.; Jones, C. [Rossby Centre, Swedish Meteorological and Hydrological Inst., Norrkoeping (Sweden)

    2001-03-01

    This work presents a regional climate model, the Rossby Centre regional Atmospheric model (RCA1), recently developed from the High Resolution Limited Area Model (HIRLAM). The changes in the HIRLAM parametrizations, necessary for climate-length integrations, are described. A regional Baltic Sea ocean model and a modeling system for the Nordic inland lake systems have been coupled with RCA1. The coupled system has been used to downscale 10-year time slices from two different general circulation model (GCM) simulations to provide high-resolution regional interpretation of large-scale modeling. A selection of the results from the control runs, i.e. the present-day climate simulations, are presented: large-scale free atmospheric fields, the surface temperature and precipitation results and results for the on-line simulated regional ocean and lake surface climates. The regional model modifies the surface climate description compared to the GCM simulations, but it is also substantially affected by the biases in the GCM simulations. The regional model also improves the representation of the regional ocean and the inland lakes, compared to the GCM results. (orig.)

  14. Contested collaboration: A descriptive model of intergroup communication in information system design

    DEFF Research Database (Denmark)

    Sonnenwald, D.H.

    1995-01-01

    support patterns of work activities, social groups, and personal beliefs. In these situations, design is fundamentally an interactive process that requires communication among users, designers, and developers. However, communication among these groups is often difficult although of paramount importance......Many information system design situations today include users, designers, and developers who, with their own unique group and individual perspectives, need to interact so that they can come to a working understanding of how the information system being developed will coexist with and ideally...... to design outcomes. Through a qualitative analysis of a house, expert system, and telecommunications network architecture and management system design situations, a descriptive model of design that characterizes communication among users, designers, and developers as they create an artifact was developed...

  15. SHERMAN, a shape-based thermophysical model. I. Model description and validation

    Science.gov (United States)

    Magri, Christopher; Howell, Ellen S.; Vervack, Ronald J.; Nolan, Michael C.; Fernández, Yanga R.; Marshall, Sean E.; Crowell, Jenna L.

    2018-03-01

    SHERMAN, a new thermophysical modeling package designed for analyzing near-infrared spectra of asteroids and other solid bodies, is presented. The model's features, the methods it uses to solve for surface and subsurface temperatures, and the synthetic data it outputs are described. A set of validation tests demonstrates that SHERMAN produces accurate output in a variety of special cases for which correct results can be derived from theory. These cases include a family of solutions to the heat equation for which thermal inertia can have any value and thermophysical properties can vary with depth and with temperature. An appendix describes a new approximation method for estimating surface temperatures within spherical-section craters, more suitable for modeling infrared beaming at short wavelengths than the standard method.

  16. Supersonic beams at high particle densities: model description beyond the ideal gas approximation.

    Science.gov (United States)

    Christen, Wolfgang; Rademann, Klaus; Even, Uzi

    2010-10-28

    Supersonic molecular beams constitute a very powerful technique in modern chemical physics. They offer several unique features such as a directed, collision-free flow of particles, very high luminosity, and an unsurpassed strong adiabatic cooling during the jet expansion. While it is generally recognized that their maximum flow velocity depends on the molecular weight and the temperature of the working fluid in the stagnation reservoir, not a lot is known on the effects of elevated particle densities. Frequently, the characteristics of supersonic beams are treated in diverse approximations of an ideal gas expansion. In these simplified model descriptions, the real gas character of fluid systems is ignored, although particle associations are responsible for fundamental processes such as the formation of clusters, both in the reservoir at increased densities and during the jet expansion. In this contribution, the various assumptions of ideal gas treatments of supersonic beams and their shortcomings are reviewed. It is shown in detail that a straightforward thermodynamic approach considering the initial and final enthalpy is capable of characterizing the terminal mean beam velocity, even at the liquid-vapor phase boundary and the critical point. Fluid properties are obtained using the most accurate equations of state available at present. This procedure provides the opportunity to naturally include the dramatic effects of nonideal gas behavior for a large variety of fluid systems. Besides the prediction of the terminal flow velocity, thermodynamic models of isentropic jet expansions permit an estimate of the upper limit of the beam temperature and the amount of condensation in the beam. These descriptions can even be extended to include spinodal decomposition processes, thus providing a generally applicable tool for investigating the two-phase region of high supersaturations not easily accessible otherwise.

  17. Perturbed Newtonian description of the Lemaître model with non-negligible pressure

    International Nuclear Information System (INIS)

    Yamamoto, Kazuhiro; Marra, Valerio; Mukhanov, Viatcheslav; Sasaki, Misao

    2016-01-01

    We study the validity of the Newtonian description of cosmological perturbations using the Lemaître model, an exact spherically symmetric solution of Einstein's equation. This problem has been investigated in the past for the case of a dust fluid. Here, we extend the previous analysis to the more general case of a fluid with non-negligible pressure, and, for the numerical examples, we consider the case of radiation (P=ρ/3). We find that, even when the density contrast has a nonlinear amplitude, the Newtonian description of the cosmological perturbations using the gravitational potential ψ and the curvature potential φ is valid as long as we consider sub-horizon inhomogeneities. However, the relation ψ+φ=O(φ 2 )—which holds for the case of a dust fluid—is not valid for a relativistic fluid, and an effective anisotropic stress is generated. This demonstrates the usefulness of the Lemaître model which allows us to study in an exact nonlinear fashion the onset of anisotropic stress in fluids with non-negligible pressure. We show that this happens when the characteristic scale of the inhomogeneity is smaller than the sound horizon and that the deviation is caused by the nonlinear effect of the fluid's fast motion. We also find that ψ+φ= [O(φ 2 ),O(c s 2φ  δ)] for an inhomogeneity with density contrast δ whose characteristic scale is smaller than the sound horizon, unless w is close to −1, where w and c s are the equation of state parameter and the sound speed of the fluid, respectively. On the other hand, we expect ψ+φ=O(φ 2 ) to hold for an inhomogeneity whose characteristic scale is larger than the sound horizon, unless the amplitude of the inhomogeneity is large and w is close to −1

  18. Conceptual modular description of the high-level waste management system for system studies model development

    Energy Technology Data Exchange (ETDEWEB)

    McKee, R.W.; Young, J.R.; Konzek, G.J.

    1992-08-01

    This document presents modular descriptions of possible alternative components of the federal high-level radioactive waste management system and the procedures for combining these modules to obtain descriptions for alternative configurations of that system. The 20 separate system component modules presented here can be combined to obtain a description of any of the 17 alternative system configurations (i.e., scenarios) that were evaluated in the MRS Systems Studies program (DOE 1989a). First-approximation descriptions of other yet-undefined system configurations could also be developed for system study purposes from this database. The descriptions include, in a modular format, both functional descriptions of the processes in the waste management system, plus physical descriptions of the equipment and facilities necessary for performance of those functions.

  19. Regional hydrogeological simulations for Forsmark - numerical modelling using DarcyTools. Preliminary site description Forsmark area version 1.2

    International Nuclear Information System (INIS)

    Follin, Sven; Stigsson, Martin; Svensson, Urban

    2005-12-01

    A numerical model is developed on a regional-scale (hundreds of square kilometres) to study the zone of influence for variable-density groundwater flow that affects the Forsmark area. Transport calculations are performed by particle tracking from a local-scale release area (a few square kilometres) to test the sensitivity to different hydrogeological uncertainties and the need for far-field realism. The main objectives of the regional flow modelling were to achieve the following: I. Palaeo-hydrogeological understanding: An improved understanding of the palaeohydrogeological conditions is necessary in order to gain credibility for the site descriptive model in general and the hydrogeological description in particular. This requires modelling of the groundwater flow from the last glaciation up to present-day with comparisons against measured TDS and other hydro-geochemical measures. II. Simulation of flow paths: The simulation and visualisation of flow paths from a tentative repository area is a means for describing the role of the current understanding of the modelled hydrogeological conditions in the target volume, i.e. the conditions of primary interest for Safety Assessment. Of particular interest here is demonstration of the need for detailed far-field realism in the numerical simulations. The motivation for a particular model size (and resolution) and set of boundary conditions for a realistic description of the recharge and discharge connected to the flow at repository depth is an essential part of the groundwater flow path simulations. The numerical modelling was performed by two separate modelling teams, the ConnectFlow Team and the DarcyTools Team. The work presented in this report was based on the computer code DarcyTools developed by Computer-aided Fluid Engineering. DarcyTools is a kind of equivalent porous media (EPM) flow code specifically designed to treat flow and salt transport in sparsely fractured crystalline rock intersected by transmissive

  20. Regional hydrogeological simulations for Forsmark - numerical modelling using DarcyTools. Preliminary site description Forsmark area version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-12-15

    A numerical model is developed on a regional-scale (hundreds of square kilometres) to study the zone of influence for variable-density groundwater flow that affects the Forsmark area. Transport calculations are performed by particle tracking from a local-scale release area (a few square kilometres) to test the sensitivity to different hydrogeological uncertainties and the need for far-field realism. The main objectives of the regional flow modelling were to achieve the following: I. Palaeo-hydrogeological understanding: An improved understanding of the palaeohydrogeological conditions is necessary in order to gain credibility for the site descriptive model in general and the hydrogeological description in particular. This requires modelling of the groundwater flow from the last glaciation up to present-day with comparisons against measured TDS and other hydro-geochemical measures. II. Simulation of flow paths: The simulation and visualisation of flow paths from a tentative repository area is a means for describing the role of the current understanding of the modelled hydrogeological conditions in the target volume, i.e. the conditions of primary interest for Safety Assessment. Of particular interest here is demonstration of the need for detailed far-field realism in the numerical simulations. The motivation for a particular model size (and resolution) and set of boundary conditions for a realistic description of the recharge and discharge connected to the flow at repository depth is an essential part of the groundwater flow path simulations. The numerical modelling was performed by two separate modelling teams, the ConnectFlow Team and the DarcyTools Team. The work presented in this report was based on the computer code DarcyTools developed by Computer-aided Fluid Engineering. DarcyTools is a kind of equivalent porous media (EPM) flow code specifically designed to treat flow and salt transport in sparsely fractured crystalline rock intersected by transmissive

  1. Lecture Notes on Mean Curvature Flow

    CERN Document Server

    Mantegazza, Carlo

    2011-01-01

    This book is an introduction to the subject of mean curvature flow of hypersurfaces with special emphasis on the analysis of singularities. This flow occurs in the description of the evolution of numerous physical models where the energy is given by the area of the interfaces. These notes provide a detailed discussion of the classical parametric approach (mainly developed by R. Hamilton and G. Huisken). They are well suited for a course at PhD/PostDoc level and can be useful for any researcher interested in a solid introduction to the technical issues of the field. All the proofs are carefully

  2. Note & Recensioni

    Directory of Open Access Journals (Sweden)

    2014-12-01

    Full Text Available VolumiVito Campanelli, Web Aesthetics. How Digital Media Affect Culture and Society; Id., Remix It Yourself. Analisi socio-estetica delle forme comunicative del Web [Emanuele Crescimanno] • Jean-François Bordron, Image et vérité. Essais sur les dimensions iconiques de la connaissance [Veronica Estay Stange] • Stéphane Dumas, Les peaux créatrices – Esthétique de la sécrétion [Marc-Vincent Howlett]NoteQuidam veritatis effectus. A proposito di A Plea for Balance in Philosophy. Essays in honour of Paolo Parrini [Fabrizio Desideri] • A Single Face to Capture the Whole World: Literary Shapes and Shadows. An Interview With Tolm Coibin [Fabrizia Abbate] •Convegno Le sensible a l’oeuvre: savoirs du corps entre esthetique et neurosciences, Parigi, 15 Maggio 2014 [Jessica Murano] 

  3. Editorial Note

    Science.gov (United States)

    van der Meer, F.; Ommen Kloeke, E.

    2015-07-01

    With this editorial note we would like to update you on the performance of the International Journal of Applied Earth Observation and Geoinformation (JAG) and inform you about changes that have been made to the composition of the editorial team. Our Journal publishes original papers that apply earth observation data for the management of natural resources and the environment. Environmental issues include biodiversity, land degradation, industrial pollution and natural hazards such as earthquakes, floods and landslides. As such the scope is broad and ranges from conceptual and more fundamental work on earth observation and geospatial sciences to the more problem-solving type of work. When I took over the role of Editor-in-Chief in 2012, I together with the Publisher set myself the mission to position JAG in the top-3 of the remote sensing and GIS journals. To do so we strived at attracting high quality and high impact papers to the journal and to reduce the review turnover time to make JAG a more attractive medium for publications. What has been achieved? Have we reached our ambitions? We can say that: The submissions have increased over the years with over 23% for the last 12 months. Naturally not all may lead to more papers, but at least a portion of the additional submissions should lead to a growth in journal content and quality.

  4. Hydrogeochemical evaluation for Simpevarp model version 1.2. Preliminary site description of the Simpevarp area

    International Nuclear Information System (INIS)

    Laaksoharju, Marcus

    2004-12-01

    to Type C groundwaters. Main reactions involve water/rock interaction for long residence non-marine brines driven by diffusion. A modelling approach was used to simulate the composition of the highly saline or brine groundwaters and, in the Simpevarp area, concluded that mixing is the main irreversible process. It controls chloride concentration that, in turn, determines the re-equilibrium path (water-rock interaction) triggered by mixing. Coupled transport modelling was used to model the groundwater age, tritium content and calcite dissolution/precipitation processes at shallow groundwater depths at both Laxemar and Simpevarp. The modelled results provide additional support to hydrogeological models by using independent hydrochemical information and added support to the general hydrogeochemical understanding of the site. In this evaluation the groundwater model has been updated, the salinity distribution, mixing processes and the major reactions altering the groundwaters have been modelled down to a depth of 1000 m, and an updated Hydrogeochemical Site Descriptive Model version 1.2 has been produced. More groundwater and isotopic data, together with microbial information, colloids and gases, provided additional site descriptive information. Finally, the introduction of coupled modelling provided additional possibilities to address independently the various processes in question

  5. Thermal modelling. Preliminary site description Simpevarp subarea - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, Jan; Back, Paer-Erik; Bengtsson, Anna; Laendell, Maerta [Geo Innova AB, Linkoeping (Sweden)

    2005-08-15

    This report presents the thermal site descriptive model for the Simpevarp subarea, version 1.2. The main objective of this report is to present the thermal modelling work where data has been identified, quality controlled, evaluated and summarised in order to make an upscaling to lithological domain level possible. The thermal conductivity at possible canister scale has been modelled for four different lithological domains (RSMA01 (Aevroe granite), RSMB01 (Fine-grained dioritoid), RSMC01 (mixture of Aevroe granite and Quartz monzodiorite), and RSMD01 (Quartz monzodiorite)). A main modelling approach has been used to determine the mean value of the thermal conductivity. Three alternative/complementary approaches have been used to evaluate the spatial variability of the thermal conductivity at domain level. The thermal modelling approaches are based on the lithological model for the Simpevarp subarea, version 1.2 together with rock type models constituted from measured and calculated (from mineral composition) thermal conductivities. For one rock type, the Aevroe granite (501044), density loggings within the specific rock type has also been used in the domain modelling in order to consider the spatial variability within the Aevroe granite. This has been possible due to the presented relationship between density and thermal conductivity, valid for the Aevroe granite. Results indicate that the mean of thermal conductivity is expected to exhibit only a small variation between the different domains, from 2.62 W/(m.K) to 2.80 W/(m.K). The standard deviation varies according to the scale considered and for the canister scale it is expected to range from 0.20 to 0.28 W/(m.K). Consequently, the lower confidence limit (95% confidence) for the canister scale is within the range 2.04-2.35 W/(m.K) for the different domains. The temperature dependence is rather small with a decrease in thermal conductivity of 1.1-3.4% per 100 deg C increase in temperature for the dominating rock

  6. Thermal modelling. Preliminary site description Simpevarp subarea - version 1.2

    International Nuclear Information System (INIS)

    Sundberg, Jan; Back, Paer-Erik; Bengtsson, Anna; Laendell, Maerta

    2005-08-01

    This report presents the thermal site descriptive model for the Simpevarp subarea, version 1.2. The main objective of this report is to present the thermal modelling work where data has been identified, quality controlled, evaluated and summarised in order to make an upscaling to lithological domain level possible. The thermal conductivity at possible canister scale has been modelled for four different lithological domains (RSMA01 (Aevroe granite), RSMB01 (Fine-grained dioritoid), RSMC01 (mixture of Aevroe granite and Quartz monzodiorite), and RSMD01 (Quartz monzodiorite)). A main modelling approach has been used to determine the mean value of the thermal conductivity. Three alternative/complementary approaches have been used to evaluate the spatial variability of the thermal conductivity at domain level. The thermal modelling approaches are based on the lithological model for the Simpevarp subarea, version 1.2 together with rock type models constituted from measured and calculated (from mineral composition) thermal conductivities. For one rock type, the Aevroe granite (501044), density loggings within the specific rock type has also been used in the domain modelling in order to consider the spatial variability within the Aevroe granite. This has been possible due to the presented relationship between density and thermal conductivity, valid for the Aevroe granite. Results indicate that the mean of thermal conductivity is expected to exhibit only a small variation between the different domains, from 2.62 W/(m.K) to 2.80 W/(m.K). The standard deviation varies according to the scale considered and for the canister scale it is expected to range from 0.20 to 0.28 W/(m.K). Consequently, the lower confidence limit (95% confidence) for the canister scale is within the range 2.04-2.35 W/(m.K) for the different domains. The temperature dependence is rather small with a decrease in thermal conductivity of 1.1-3.4% per 100 deg C increase in temperature for the dominating rock

  7. Description of proton radioactivity using the Coulomb and proximity potential model for deformed nuclei

    Science.gov (United States)

    Santhosh, K. P.; Sukumaran, Indu

    2017-09-01

    Half-life predictions have been performed for the proton emitters with Z >50 in the ground state and isomeric state using the Coulomb and proximity potential model for deformed nuclei (CPPMDN). The agreement of the calculated values with the experimental data made it possible to predict some proton emissions that are not verified experimentally yet. For a comparison, the calculations also are performed using other theoretical models, such as the Gamow-like model of Zdeb et al. [Eur. Phys. J. A 52, 323 (2016), 10.1140/epja/i2016-16323-7], the semiempirical relation of Hatsukawa et al. [Phys. Rev. C 42, 674 (1990), 10.1103/PhysRevC.42.674], and the CPPM of Santhosh et al. [Pramana 58, 611 (2002)], 10.1007/s12043-002-0019-2. The Geiger-Nuttall law, originally observed for α decay, studied for proton radioactivity is found to work well provided it is plotted for the isotopes of a given proton emitter nuclide with the same ℓ value. The universal curve is found to be valid for proton radioactivity also as we obtained a single straight line for all proton emissions irrespective of the parents. Through the analysis of the experimentally measured half-lives of 44 proton emitters, the study revealed that the present systematic study lends support to a unified description for studying α decay, cluster radioactivity, and proton radioactivity.

  8. MELMRK 2. 0: A description of computer models and results of code testing

    Energy Technology Data Exchange (ETDEWEB)

    Wittman, R.S. (ed.) (Westinghouse Savannah River Co., Aiken, SC (United States)); Denny, V.; Mertol, A. (Science Applications International Corp., Los Atlos, CA (United States))

    1992-05-31

    An advanced version of the MELMRK computer code has been developed that provides detailed models for conservation of mass, momentum, and thermal energy within relocating streams of molten metallics during meltdown of Savannah River Site (SRS) reactor assemblies. In addition to a mechanistic treatment of transport phenomena within a relocating stream, MELMRK 2.0 retains the MOD1 capability for real-time coupling of the in-depth thermal response of participating assembly heat structure and, further, augments this capability with models for self-heating of relocating melt owing to steam oxidation of metallics and fission product decay power. As was the case for MELMRK 1.0, the MOD2 version offers state-of-the-art numerics for solving coupled sets of nonlinear differential equations. Principal features include application of multi-dimensional Newton-Raphson techniques to accelerate convergence behavior and direct matrix inversion to advance primitive variables from one iterate to the next. Additionally, MELMRK 2.0 provides logical event flags for managing the broad range of code options available for treating such features as (1) coexisting flow regimes, (2) dynamic transitions between flow regimes, and (3) linkages between heatup and relocation code modules. The purpose of this report is to provide a detailed description of the MELMRK 2.0 computer models for melt relocation. Also included are illustrative results for code testing, as well as an integrated calculation for meltdown of a Mark 31a assembly.

  9. MELMRK 2.0: A description of computer models and results of code testing

    Energy Technology Data Exchange (ETDEWEB)

    Wittman, R.S. [ed.] [Westinghouse Savannah River Co., Aiken, SC (United States); Denny, V.; Mertol, A. [Science Applications International Corp., Los Atlos, CA (United States)

    1992-05-31

    An advanced version of the MELMRK computer code has been developed that provides detailed models for conservation of mass, momentum, and thermal energy within relocating streams of molten metallics during meltdown of Savannah River Site (SRS) reactor assemblies. In addition to a mechanistic treatment of transport phenomena within a relocating stream, MELMRK 2.0 retains the MOD1 capability for real-time coupling of the in-depth thermal response of participating assembly heat structure and, further, augments this capability with models for self-heating of relocating melt owing to steam oxidation of metallics and fission product decay power. As was the case for MELMRK 1.0, the MOD2 version offers state-of-the-art numerics for solving coupled sets of nonlinear differential equations. Principal features include application of multi-dimensional Newton-Raphson techniques to accelerate convergence behavior and direct matrix inversion to advance primitive variables from one iterate to the next. Additionally, MELMRK 2.0 provides logical event flags for managing the broad range of code options available for treating such features as (1) coexisting flow regimes, (2) dynamic transitions between flow regimes, and (3) linkages between heatup and relocation code modules. The purpose of this report is to provide a detailed description of the MELMRK 2.0 computer models for melt relocation. Also included are illustrative results for code testing, as well as an integrated calculation for meltdown of a Mark 31a assembly.

  10. A computational model for estimating the mechanics of horizontal flapping flight in bats: model description and validation.

    Science.gov (United States)

    Watts, P; Mitchell, E J; Swartz, S M

    2001-08-01

    We combine three-dimensional descriptions of the movement patterns of the shoulder, elbow, carpus, third metacarpophalangeal joint and wingtip with a constant-circulation estimation of aerodynamic force to model the wing mechanics of the grey-headed flying fox (Pteropus poliocephalus) in level flight. Once rigorously validated, this computer model can be used to study diverse aspects of flight. In the model, we partitioned the wing into a series of chordwise segments and calculated the magnitude of segmental aerodynamic forces assuming an elliptical, spanwise distribution of circulation at the middle of the downstroke. The lift component of the aerodynamic force is typically an order of magnitude greater than the thrust component. The largest source of drag is induced drag, which is approximately an order of magnitude greater than body form and skin friction drag. Using this model and standard engineering beam theory, we calculate internal reaction forces, moments and stresses at the humeral and radial midshaft during flight. To assess the validity of our model, we compare the model-derived stresses with our previous in vivo empirical measurements of bone strain from P. poliocephalus in free flapping flight. Agreement between bone stresses from the simulation and those calculated from empirical strain measurements is excellent and suggests that the computer model captures a significant portion of the mechanics and aerodynamics of flight in this species.

  11. Modeling radon entry into houses with basements: Model description and verification

    International Nuclear Information System (INIS)

    Revzan, K.L.; Fisk, W.J.; Gadgil, A.J.

    1991-01-01

    We model radon entry into basements using a previously developed three-dimensional steady-state finite difference model that has been modified in the following ways: first, cylindrical coordinates are used to take advantage of the symmetry of the problem in the horizontal plant; second, the configuration of the basement has been made more realistic by incorporating the concrete footer; third, a quadratic relationship between the pressure and flow in the L-shaped gap between slab, footer, and wall has been employed; fourth, the natural convection of the soil gas which follows from the heating of the basement in winter has been taken into account. The temperature field in the soil is determined from the equation of energy conservation, using the basement, surface, and deep-soil temperatures as boundary conditions. The pressure field is determined from Darcy's law and the equation of mass conservation (continuity), assuming that there is no flow across any boundary except the soil surface (atmospheric pressure) and the opening in the basement shell (fixed pressure). After the pressure and temperatures field have been obtained the velocity field is found from Darcy's law. Finally, the radon concentration field is found from the equation of mass-transport. The convective radon entry rate through the opening or openings is then calculated. In this paper we describe the modified model, compare the predicted radon entry rates with and without the consideration of thermal convection, and compare the predicted rates with determined from data from 7 houses in the Spokane River valley of Washington and Idaho. Although the predicted rate is much lower than the mean of the rates determined from measurements, errors in the measurement of soil permeability and variations in the permeability of the area immediately under the basement slab, which has a significant influence on the pressure field, can account for the range of entry rates inferred from the data. 25 refs., 8 figs

  12. Power system models - A description of power markets and outline of market modelling in Wilmar

    DEFF Research Database (Denmark)

    Meibom, Peter; Morthorst, Poul Erik; Nielsen, Lars Henrik

    2004-01-01

    The aim of the Wilmar project is to investigate technical and economical problems related to large-scale deployment of renewable sources and to develop a modelling tool that can handle system simulations for a larger geographical region with anInternational power exchange. Wilmar is an abbreviation...... of “Wind Power Integration in Liberalised Electricity Markets”. The project was started in 2002 and is funded by the EU’s 5th Research programme on energy and environment. Risø National Laboratory isco-ordinator of the project and partners include SINTEF, Kungliga Tekniska Högskola, University of Stuttgart...

  13. Thermodynamic stabilities of linear and crinkled tapes and cyclic rosettes in melamine-cyanurate assemblies: a model description

    NARCIS (Netherlands)

    Bielejewska, A.G.; Marjo, Christopher E.; Prins, L.J.; Timmerman, P.; de Jong, Feike; Reinhoudt, David

    2001-01-01

    In this paper we describe model calculations for the self-assembly of N,N-disubstituted melamines 1 and N-substituted cyanuric acid or 5,5-disubstituted barbituric acid derivatives 2 into linear or crinkled tapes and cyclic rosettes via cooperative hydrogen bond formation. The model description

  14. Parameter-free one-center model potential for an effective one-electron description of molecular hydrogen

    DEFF Research Database (Denmark)

    Lühr, Armin Christian; Vanne, Yulian; Saenz, Alejandro

    2008-01-01

    For the description of an H2 molecule, an effective one-electron model potential is proposed which is fully determined by the exact ionization potential of the H2 molecule. In order to test the model potential and examine its properties, it is employed to determine excitation energies, transition...

  15. One of Us: Multilevel Models Examining the Impact of Descriptive Representation on Civic Engagement

    OpenAIRE

    Norris, Pippa; Krook, Mona Lena

    2009-01-01

    This paper examines the impact of descriptive representation in comparative perspective. The goals are to establish (1) whether descriptive representation mobilizes attitudinal and behavioral indicators of civic engagement; (2) whether the strength of any such relationship differs for women and young people; and (3) whether this relationship is evident cross-nationally. The first section provides an overview of existing research on descriptive representation and the civic engagement of women ...

  16. Medicalization in psychiatry: the medical model, descriptive diagnosis, and lost knowledge.

    Science.gov (United States)

    Sedler, Mark J

    2016-06-01

    Medicalization was the theme of the 29th European Conference on Philosophy of Medicine and Health Care that included a panel session on the DSM and mental health. Philosophical critiques of the medical model in psychiatry suffer from endemic assumptions that fail to acknowledge the real world challenges of psychiatric nosology. The descriptive model of classification of the DSM 3-5 serves a valid purpose in the absence of known etiologies for the majority of psychiatric conditions. However, a consequence of the "atheoretical" approach of the DSM is rampant epistemological confusion, a shortcoming that can be ameliorated by importing perspectives from the work of Jaspers and McHugh. Finally, contemporary psychiatry's over-reliance on neuroscience and pharmacotherapy has led to a reductionist agenda that is antagonistic to the inherently pluralistic nature of psychiatry.  As a result,  the field has suffered a loss of knowledge that may be difficult to recover.

  17. What Can Be Learned From a Laboratory Model of Conceptual Change? Descriptive Findings and Methodological Issues

    Science.gov (United States)

    Ohlsson, Stellan; Cosejo, David G.

    2014-07-01

    The problem of how people process novel and unexpected information— deep learning (Ohlsson in Deep learning: how the mind overrides experience. Cambridge University Press, New York, 2011)—is central to several fields of research, including creativity, belief revision, and conceptual change. Researchers have not converged on a single theory for conceptual change, nor has any one theory been decisively falsified. One contributing reason is the difficulty of collecting informative data in this field. We propose that the commonly used methodologies of historical analysis, classroom interventions, and developmental studies, although indispensible, can be supplemented with studies of laboratory models of conceptual change. We introduce re- categorization, an experimental paradigm in which learners transition from one definition of a categorical concept to another, incompatible definition of the same concept, a simple form of conceptual change. We describe a re-categorization experiment, report some descriptive findings pertaining to the effects of category complexity, the temporal unfolding of learning, and the nature of the learner's final knowledge state. We end with a brief discussion of ways in which the re-categorization model can be improved.

  18. Process Options Description for Vitrification Flowsheet Model of INEEL Sodium Bearing Waste

    International Nuclear Information System (INIS)

    Nichols, T.T.; Taylor, D.D.; Lauerhass, L.; Barnes, C.M.

    2002-01-01

    The technical information required for the development of a basic steady-state process simulation of the vitrification treatment train of sodium bearing waste (SBW) at Idaho National Engineering and Environmental Laboratory (INEEL) is presented. The objective of the modeling effort is to provide the predictive capability required to optimize an entire treatment train and assess system-wide impacts of local changes at individual unit operations, with the aim of reducing the schedule and cost of future process/facility design efforts. All the information required a priori for engineers to construct and link unit operation modules in a commercial software simulator to represent the alternative treatment trains is presented. The information is of a mid- to high-level nature and consists of the following: (1) a description of twenty-four specific unit operations--their operating conditions and constraints, primary species and key outputs, and the initial modeling approaches that will be used in the first year of the simulation's development; (2) three potential configurations of the unit operations (trains) and their interdependencies via stream connections; and (3) representative stream compositional makeups

  19. TogoTable: cross-database annotation system using the Resource Description Framework (RDF) data model.

    Science.gov (United States)

    Kawano, Shin; Watanabe, Tsutomu; Mizuguchi, Sohei; Araki, Norie; Katayama, Toshiaki; Yamaguchi, Atsuko

    2014-07-01

    TogoTable (http://togotable.dbcls.jp/) is a web tool that adds user-specified annotations to a table that a user uploads. Annotations are drawn from several biological databases that use the Resource Description Framework (RDF) data model. TogoTable uses database identifiers (IDs) in the table as a query key for searching. RDF data, which form a network called Linked Open Data (LOD), can be searched from SPARQL endpoints using a SPARQL query language. Because TogoTable uses RDF, it can integrate annotations from not only the reference database to which the IDs originally belong, but also externally linked databases via the LOD network. For example, annotations in the Protein Data Bank can be retrieved using GeneID through links provided by the UniProt RDF. Because RDF has been standardized by the World Wide Web Consortium, any database with annotations based on the RDF data model can be easily incorporated into this tool. We believe that TogoTable is a valuable Web tool, particularly for experimental biologists who need to process huge amounts of data such as high-throughput experimental output. © The Author(s) 2014. Published by Oxford University Press on behalf of Nucleic Acids Research.

  20. Improving the description of collective effects within the combinatorial model of nuclear level densities

    International Nuclear Information System (INIS)

    Hilaire, S.; Girod, M.; Goriely, S.

    2011-01-01

    The combinatorial model of nuclear level densities has now reached a level of accuracy comparable to that of the best global analytical expressions without suffering from the limits imposed by the statistical hypothesis on which the latter expressions rely. In particular, it provides naturally, non Gaussian spin distribution as well as non equipartition of parities which are known to have a significant impact on cross section predictions at low energies. Our first global model developed in Ref. 1 suffered from deficiencies, in particular in the way the collective effects - both vibrational and rotational - were treated. We have recently improved this treatment using simultaneously the single particle levels and collective properties predicted by a newly derived Gogny interaction, therefore enabling a microscopic description of energy-dependent shell, pairing and deformation effects. In addition, for deformed nuclei, the transition to sphericity is coherently taken into account on the basis of a temperature-dependent Hartree-Fock calculation which provides at each temperature the structure properties needed to build the level densities. This new method is described and shown to give promising preliminary results with respect to available experimental data. (authors)

  1. A quasi-particle description of the M(3,p) models

    International Nuclear Information System (INIS)

    Jacob, P.; Mathieu, P.

    2006-01-01

    The M(3,p) minimal models are reconsidered from the point of view of the extended algebra whose generators are the energy-momentum tensor and the primary field φ 2,1 of dimension (p-2)/4. Within this framework, we provide a quasi-particle description of these models, in which all states are expressed solely in terms of the φ 2,1 -modes. More precisely, we show that all the states can be written in terms of φ 2,1 -type highest-weight states and their φ 2,1 -descendants. We further demonstrate that the conformal dimension of these highest-weight states can be calculated from the φ 2,1 commutation relations, the highest-weight conditions and associativity. For the simplest models (p=5,7), the full spectrum is explicitly reconstructed along these lines. For p odd, the commutation relations between the φ 2,1 modes take the form of infinite sums, i.e., of generalized commutation relations akin to parafermionic models. In that case, an unexpected operator, generalizing the Witten index, is unraveled in the OPE of φ 2,1 with itself. A quasi-particle basis formulated in terms of the sole φ 2,1 modes is studied for all allowed values of p. We argue that it is governed by jagged-type partitions further subject a difference 2 condition at distance 2. We demonstrate the correctness of this basis by constructing its generating function, from which the proper fermionic expression of the combination of the Virasoro irreducible characters χ 1,s and χ 1,p-s (for 1=

  2. Chemistry Notes

    Science.gov (United States)

    School Science Review, 1972

    1972-01-01

    Short articles describe techniques for demonstrating corrosion of metallic couples, colloidal dispersion of light, the biodegradability of detergents, the laboratory preparation of chlorine in model electrolytic cells, and the detection of food colorings in candy. (AL)

  3. Multiparticle model for the description of the neutron-production in the plasma focus

    International Nuclear Information System (INIS)

    Ruhs, N.

    Following a comparison of the various numerical methods the experimental set-up is described. This is followed by a brief description of the MHD computation on which the particle computation is to be based. A description is given of the methods applied for the particle computation

  4. Editors' note

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    Other volumes have been concerned with subjects in fluid mechanics, computer science and technology, opto-electronics, nonlinear dynamical systems, heat transfer and mechanical engineering, structural analysis and dynamics, materials sciences and technology, mathematical modelling, and many other related subjects ...

  5. The limnic ecosystems at Forsmark and Laxemar-Simpevarp. Site descriptive modelling SDM-Site

    International Nuclear Information System (INIS)

    Norden, Sara; Soederbaeck, Bjoern; Andersson, Eva

    2008-11-01

    The overall objective of this report is to provide a thorough description of the limnic ecosystems at both Forsmark and Laxemar-Simpevarp. This information may be used in the Safety Assessment and as a basis for the Environmental Impact Assessment. Three aims were set up for the report: 1) to characterize and describe the limnic ecosystems today and in the past in the Forsmark and Laxemar-Simpevarp areas and compare these ecosystems with limnic ecosystems in other areas; 2) to evaluate and visualize major pools, fluxes and sinks of elements within the limnic ecosystems; and finally 3) to describe human impact on the limnic ecosystems. The report includes a thorough description of the lakes and streams in Forsmark and Laxemar-Simpevarp and covers the following areas: catchment area characteristics, hydrology, climate, sediment characteristics, physical characteristics of streams, habitat distribution in lakes, biotic components, water chemistry, comparisons with other lakes and streams in the region, and a historical description. Ecosystem models for carbon and mass balances for a number of elements have been calculated to further improve the understanding of the lake ecosystems. Important processes for the safety assessment are described and evaluated in the report. The Forsmark regional model area contains more than 20 permanent lakes and pools. All lakes are small and shallow, and are characterized as oligotrophic hardwater lakes. Calcareous soils in the area give rise to high calcium concentrations in the surface water, which in turn leads to high pH and low nutrient concentrations in water as phosphorus often co-precipitates with calcium. The shallow depths and moderate water colour permit photosynthesis in the entire benthic habitat of the lakes, and the bottoms are covered by dense stands of the macroalgae Chara sp. Moreover, many of the lakes also have a thick microbial mat (>10 cm), consisting of cyanobacteria and diatoms, in the benthic habitat. Fish in

  6. Modeling and Explaining Content: Definition, Research Support, and Measurement of the "ETS"® National Observational Teaching Examination (NOTE) Assessment Series. Research Memorandum No. RM-16-07

    Science.gov (United States)

    Stickler, Leslie; Sykes, Gary

    2016-01-01

    This report reviews the scholarly and research evidence supporting the construct labeled modeling and explaining content (MEC), which is measured via a performance assessment in the "ETS"® National Observational Teaching Examination (NOTE) assessment series. This construct involves practices at the heart of teaching that deal with how…

  7. Self-consistent model of a solid for the description of lattice and magnetic properties

    International Nuclear Information System (INIS)

    Balcerzak, T.; Szałowski, K.; Jaščur, M.

    2017-01-01

    In the paper a self-consistent theoretical description of the lattice and magnetic properties of a model system with magnetoelastic interaction is presented. The dependence of magnetic exchange integrals on the distance between interacting spins is assumed, which couples the magnetic and the lattice subsystem. The framework is based on summation of the Gibbs free energies for the lattice subsystem and magnetic subsystem. On the basis of minimization principle for the Gibbs energy, a set of equations of state for the system is derived. These equations of state combine the parameters describing the elastic properties (relative volume deformation) and the magnetic properties (magnetization changes). The formalism is extensively illustrated with the numerical calculations performed for a system of ferromagnetically coupled spins S=1/2 localized at the sites of simple cubic lattice. In particular, the significant influence of the magnetic subsystem on the elastic properties is demonstrated. It manifests itself in significant modification of such quantities as the relative volume deformation, thermal expansion coefficient or isothermal compressibility, in particular, in the vicinity of the magnetic phase transition. On the other hand, the influence of lattice subsystem on the magnetic one is also evident. It takes, for example, the form of dependence of the critical (Curie) temperature and magnetization itself on the external pressure, which is thoroughly investigated.

  8. Model-Based Referenceless Quality Metric of 3D Synthesized Images Using Local Image Description.

    Science.gov (United States)

    Gu, Ke; Jakhetiya, Vinit; Qiao, Jun-Fei; Li, Xiaoli; Lin, Weisi; Thalmann, Daniel

    2017-07-28

    New challenges have been brought out along with the emerging of 3D-related technologies such as virtual reality (VR), augmented reality (AR), and mixed reality (MR). Free viewpoint video (FVV), due to its applications in remote surveillance, remote education, etc, based on the flexible selection of direction and viewpoint, has been perceived as the development direction of next-generation video technologies and has drawn a wide range of researchers' attention. Since FVV images are synthesized via a depth image-based rendering (DIBR) procedure in the "blind" environment (without reference images), a reliable real-time blind quality evaluation and monitoring system is urgently required. But existing assessment metrics do not render human judgments faithfully mainly because geometric distortions are generated by DIBR. To this end, this paper proposes a novel referenceless quality metric of DIBR-synthesized images using the autoregression (AR)-based local image description. It was found that, after the AR prediction, the reconstructed error between a DIBR-synthesized image and its AR-predicted image can accurately capture the geometry distortion. The visual saliency is then leveraged to modify the proposed blind quality metric to a sizable margin. Experiments validate the superiority of our no-reference quality method as compared with prevailing full-, reduced- and no-reference models.

  9. Generalized Selectivity Description for Polymeric Ion-Selective Electrodes Based on the Phase Boundary Potential Model.

    Science.gov (United States)

    Bakker, Eric

    2010-02-15

    A generalized description of the response behavior of potentiometric polymer membrane ion-selective electrodes is presented on the basis of ion-exchange equilibrium considerations at the sample-membrane interface. This paper includes and extends on previously reported theoretical advances in a more compact yet more comprehensive form. Specifically, the phase boundary potential model is used to derive the origin of the Nernstian response behavior in a single expression, which is valid for a membrane containing any charge type and complex stoichiometry of ionophore and ion-exchanger. This forms the basis for a generalized expression of the selectivity coefficient, which may be used for the selectivity optimization of ion-selective membranes containing electrically charged and neutral ionophores of any desired stoichiometry. It is shown to reduce to expressions published previously for specialized cases, and may be effectively applied to problems relevant in modern potentiometry. The treatment is extended to mixed ion solutions, offering a comprehensive yet formally compact derivation of the response behavior of ion-selective electrodes to a mixture of ions of any desired charge. It is compared to predictions by the less accurate Nicolsky-Eisenman equation. The influence of ion fluxes or any form of electrochemical excitation is not considered here, but may be readily incorporated if an ion-exchange equilibrium at the interface may be assumed in these cases.

  10. Self-consistent model of a solid for the description of lattice and magnetic properties

    Energy Technology Data Exchange (ETDEWEB)

    Balcerzak, T., E-mail: t_balcerzak@uni.lodz.pl [Department of Solid State Physics, Faculty of Physics and Applied Informatics, University of Łódź, ulica Pomorska 149/153, 90-236 Łódź (Poland); Szałowski, K., E-mail: kszalowski@uni.lodz.pl [Department of Solid State Physics, Faculty of Physics and Applied Informatics, University of Łódź, ulica Pomorska 149/153, 90-236 Łódź (Poland); Jaščur, M. [Department of Theoretical Physics and Astrophysics, Faculty of Science, P. J. Šáfárik University, Park Angelinum 9, 041 54 Košice (Slovakia)

    2017-03-15

    In the paper a self-consistent theoretical description of the lattice and magnetic properties of a model system with magnetoelastic interaction is presented. The dependence of magnetic exchange integrals on the distance between interacting spins is assumed, which couples the magnetic and the lattice subsystem. The framework is based on summation of the Gibbs free energies for the lattice subsystem and magnetic subsystem. On the basis of minimization principle for the Gibbs energy, a set of equations of state for the system is derived. These equations of state combine the parameters describing the elastic properties (relative volume deformation) and the magnetic properties (magnetization changes). The formalism is extensively illustrated with the numerical calculations performed for a system of ferromagnetically coupled spins S=1/2 localized at the sites of simple cubic lattice. In particular, the significant influence of the magnetic subsystem on the elastic properties is demonstrated. It manifests itself in significant modification of such quantities as the relative volume deformation, thermal expansion coefficient or isothermal compressibility, in particular, in the vicinity of the magnetic phase transition. On the other hand, the influence of lattice subsystem on the magnetic one is also evident. It takes, for example, the form of dependence of the critical (Curie) temperature and magnetization itself on the external pressure, which is thoroughly investigated.

  11. Description of a nucleon in nuclear matter using the chiral bag model

    International Nuclear Information System (INIS)

    Bunatyan, G.G.

    1990-01-01

    The chiral bag (cloudy bag) model, which contains an essentially nonlinear interaction of quarks with both the classical and quantum pion field, is extended for description of a nucleon in nuclear matter. The dependence on the density and temperature of the medium is studied. The pion field in nuclear matter differs considerably from the free field, and this leads to a modification of the nucleon bag. Increase of the density ρ and temperature T causes strengthening of the pion field and growth of its thermodynamic fluctuations. At sufficiently high densities ρ approx-gt ρ CB and temperatures T≥T cr this leads to instability of the three-quark nucleon bag. Under such conditions nuclear matter cannot be composed only of nucleons, and one should expect the appearance of a different, non-nucleon, phase. Estimates of the critical density and temperature are obtained: ρ CB ∼ (1.5-2)ρ 0 and T cr ∼ 200 MeV (where ρ 0 is the conventional nuclear density)

  12. The limnic ecosystems at Forsmark and Laxemar-Simpevarp. Site descriptive modelling SDM-Site

    Energy Technology Data Exchange (ETDEWEB)

    Norden, Sara; Soederbaeck, Bjoern (Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden)); Andersson, Eva (SWECO, Stockholm (Sweden))

    2008-11-15

    The overall objective of this report is to provide a thorough description of the limnic ecosystems at both Forsmark and Laxemar-Simpevarp. This information may be used in the Safety Assessment and as a basis for the Environmental Impact Assessment. Three aims were set up for the report: 1) to characterize and describe the limnic ecosystems today and in the past in the Forsmark and Laxemar-Simpevarp areas and compare these ecosystems with limnic ecosystems in other areas; 2) to evaluate and visualize major pools, fluxes and sinks of elements within the limnic ecosystems; and finally 3) to describe human impact on the limnic ecosystems. The report includes a thorough description of the lakes and streams in Forsmark and Laxemar-Simpevarp and covers the following areas: catchment area characteristics, hydrology, climate, sediment characteristics, physical characteristics of streams, habitat distribution in lakes, biotic components, water chemistry, comparisons with other lakes and streams in the region, and a historical description. Ecosystem models for carbon and mass balances for a number of elements have been calculated to further improve the understanding of the lake ecosystems. Important processes for the safety assessment are described and evaluated in the report. The Forsmark regional model area contains more than 20 permanent lakes and pools. All lakes are small and shallow, and are characterized as oligotrophic hardwater lakes. Calcareous soils in the area give rise to high calcium concentrations in the surface water, which in turn leads to high pH and low nutrient concentrations in water as phosphorus often co-precipitates with calcium. The shallow depths and moderate water colour permit photosynthesis in the entire benthic habitat of the lakes, and the bottoms are covered by dense stands of the macroalgae Chara sp. Moreover, many of the lakes also have a thick microbial mat (>10 cm), consisting of cyanobacteria and diatoms, in the benthic habitat. Fish in

  13. The descriptive representation in the perspectives of the XXI century: an evolutionary study of the conceptual models

    Directory of Open Access Journals (Sweden)

    Elisângela Cristina Aganette

    2017-09-01

    Full Text Available The descriptive representation or cataloging is seen as a multidimensional decision process that structures and standardizes the different aspects of an information item, making it unique and subject to recovery and use. This article emphasizes the study of descriptive representation where the main objective is to analyze some conceptual models and their evolution with respect to representation of information. It also presents its features in dealing with current proposals and trends in the twenty-first century, showing the importance of each conceptual model and its possibilities of integration into virtual environments. The aim is to survey and analyze the main conceptual models used by the Library and Information Science. The results allow a broad view about the development of conceptual models and an understanding of descriptive representation in the current context of network technologies, which presents agile, simple and constantly updatable. Other contributions can be identified, such as improving the understanding of descriptive representation area, their relationships and models and provide subsidies to assist the information scientist in the representation of reality

  14. Thermal modelling. Preliminary site description Laxemar subarea - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Sundberg, Jan; Wrafter, John; Back, Paer-Erik; Laendell, Maerta [Geo Innova AB, Linkoeping (Sweden)

    2006-02-15

    This report presents the thermal site descriptive model for the Laxemar subarea, version 1.2. The main objective of this report is to present the thermal modelling work where data has been identified, quality controlled, evaluated and summarised in order to make an upscaling to lithological domain level possible. The thermal conductivity at canister scale has been modelled for five different lithological domains: RSMA (Aevroe granite), RSMBA (mixture of Aevroe granite and fine-grained dioritoid), RSMD (quartz monzodiorite), RSME (diorite/gabbro) and RSMM (mix domain with high frequency of diorite to gabbro). A base modelling approach has been used to determine the mean value of the thermal conductivity. Four alternative/complementary approaches have been used to evaluate the spatial variability of the thermal conductivity at domain level. The thermal modelling approaches are based on the lithological domain model for the Laxemar subarea, version 1.2 together with rock type models based on measured and calculated (from mineral composition) thermal conductivities. For one rock type, Aevroe granite (501044), density loggings have also been used in the domain modelling in order to evaluate the spatial variability within the Aevroe granite. This has been possible due to an established relationship between density and thermal conductivity, valid for the Aevroe granite. Results indicate that the means of thermal conductivity for the various domains are expected to exhibit a variation from 2.45 W/(m.K) to 2.87 W/(m.K). The standard deviation varies according to the scale considered, and for the 0.8 m scale it is expected to range from 0.17 to 0.29 W/(m.K). Estimates of lower tail percentiles for the same scale are presented for all five domains. The temperature dependence is rather small with a decrease in thermal conductivity of 1.1-5.3% per 100 deg C increase in temperature for the dominant rock types. There are a number of important uncertainties associated with these

  15. A descriptive model of patient readiness, motivators, and hepatitis C treatment uptake among Australian prisoners.

    Directory of Open Access Journals (Sweden)

    Lorraine Yap

    Full Text Available BACKGROUND: Hepatitis C virus infection (HCV has a significant global health burden with an estimated 2%-3% of the world's population infected, and more than 350,000 dying annually from HCV-related conditions including liver failure and liver cancer. Prisons potentially offer a relatively stable environment in which to commence treatment as they usually provide good access to health care providers, and are organised around routine and structure. Uptake of treatment of HCV, however, remains low in the community and in prisons. In this study, we explored factors affecting treatment uptake inside prisons and hypothesised that prisoners have unique issues influencing HCV treatment uptake as a consequence of their incarceration which are not experienced in other populations. METHOD AND FINDINGS: We undertook a qualitative study exploring prisoners' accounts of why they refused, deferred, delayed or discontinued HCV treatment in prison. Between 2010 and 2013, 116 Australian inmates were interviewed from prisons in New South Wales, Queensland, and Western Australia. Prisoners experienced many factors similar to those which influence treatment uptake of those living with HCV infection in the community. Incarceration, however, provides different circumstances of how these factors are experienced which need to be better understood if the number of prisoners receiving treatment is to be increased. We developed a descriptive model of patient readiness and motivators for HCV treatment inside prisons and discussed how we can improve treatment uptake among prisoners. CONCLUSION: This study identified a broad and unique range of challenges to treatment of HCV in prison. Some of these are likely to be diminished by improving treatment options and improved models of health care delivery. Other barriers relate to inmate understanding of their illness and stigmatisation by other inmates and custodial staff and generally appear less amenable to change although there

  16. A Descriptive Model of Patient Readiness, Motivators, and Hepatitis C Treatment Uptake among Australian Prisoners

    Science.gov (United States)

    Yap, Lorraine; Carruthers, Susan; Thompson, Sandra; Cheng, Wendy; Jones, Jocelyn; Simpson, Paul; Richards, Alun; Thein, Hla-Hla; Haber, Paul; Lloyd, Andrew; Butler, Tony

    2014-01-01

    Background Hepatitis C virus infection (HCV) has a significant global health burden with an estimated 2%–3% of the world's population infected, and more than 350,000 dying annually from HCV-related conditions including liver failure and liver cancer. Prisons potentially offer a relatively stable environment in which to commence treatment as they usually provide good access to health care providers, and are organised around routine and structure. Uptake of treatment of HCV, however, remains low in the community and in prisons. In this study, we explored factors affecting treatment uptake inside prisons and hypothesised that prisoners have unique issues influencing HCV treatment uptake as a consequence of their incarceration which are not experienced in other populations. Method and Findings We undertook a qualitative study exploring prisoners' accounts of why they refused, deferred, delayed or discontinued HCV treatment in prison. Between 2010 and 2013, 116 Australian inmates were interviewed from prisons in New South Wales, Queensland, and Western Australia. Prisoners experienced many factors similar to those which influence treatment uptake of those living with HCV infection in the community. Incarceration, however, provides different circumstances of how these factors are experienced which need to be better understood if the number of prisoners receiving treatment is to be increased. We developed a descriptive model of patient readiness and motivators for HCV treatment inside prisons and discussed how we can improve treatment uptake among prisoners. Conclusion This study identified a broad and unique range of challenges to treatment of HCV in prison. Some of these are likely to be diminished by improving treatment options and improved models of health care delivery. Other barriers relate to inmate understanding of their illness and stigmatisation by other inmates and custodial staff and generally appear less amenable to change although there is potential for

  17. Numerical modelling of surface hydrology and near-surface hydrogeology at Forsmark. Site descriptive modelling SDM. Site Forsmark

    International Nuclear Information System (INIS)

    Bosson, Emma; Gustafsson, Lars-Goeran; Sassner, Mona

    2008-09-01

    SKB is currently performing site investigations at two potential sites for a final repository for spent nuclear fuel. This report presents results of water flow and solute transport modelling of the Forsmark site. The modelling reported in this document focused on the near-surface groundwater, i.e. groundwater in Quaternary deposits and shallow rock, and surface water systems, and was performed using the MIKE SHE tool. The most recent site data used in the modelling were delivered in the Forsmark 2.3 dataset, which had its 'data freeze' on March 31, 2007. The present modelling is performed in support of the final version of the Forsmark site description that is produced during the site investigation phase. In this work, the hydrological modelling system MIKE SHE has been used to describe near-surface groundwater flow and the contact between groundwater and surface water at the Forsmark site. The surface water system at Forsmark is described with the one-dimensional 'channel flow' modelling tool MIKE 11, which is fully and dynamically integrated with MIKE SHE. The MIKE SHE model was updated with data from the F2.3 data freeze. The main updates concerned the geological description of the saturated zone and the time series data on water levels and surface water discharges. The time series data used as input data and for calibration and validation was extended until the Forsmark 2.3 data freeze (March 31, 2007). The present work can be subdivided into the following four parts: 1. Update of the numerical flow model. 2. Sensitivity analysis and calibration of the model parameters. 3. Validation of the calibrated model, followed by evaluation and identification of discrepancies between measurements and model results. 4. Additional sensitivity analysis and calibration in order to resolve the problems identified in point three above. The main actions taken during the calibration can be summarised as follows: 1. The potential evapotranspiration was reduced in order to reach

  18. Hydrogeochemical evaluation for Simpevarp model version 1.2. Preliminary site description of the Simpevarp area

    Energy Technology Data Exchange (ETDEWEB)

    Laaksoharju, Marcus (ed.) [Geopoint AB, Stockholm (Sweden)

    2004-12-01

    process. It controls chloride concentration that, in turn, determines the re-equilibrium path (water-rock interaction) triggered by mixing. Coupled transport modelling was used to model the groundwater age, tritium content and calcite dissolution/precipitation processes at shallow groundwater depths at both Laxemar and Simpevarp. The modelled results provide additional support to hydrogeological models by using independent hydrochemical information and added support to the general hydrogeochemical understanding of the site. In this evaluation the groundwater model has been updated, the salinity distribution, mixing processes and the major reactions altering the groundwaters have been modelled down to a depth of 1000 m, and an updated Hydrogeochemical Site Descriptive Model version 1.2 has been produced. More groundwater and isotopic data, together with microbial information, colloids and gases, provided additional site descriptive information. Finally, the introduction of coupled modelling provided additional possibilities to address independently the various processes in question.

  19. Rock Mechanics Forsmark. Site descriptive modelling Forsmark stage 2.2

    Energy Technology Data Exchange (ETDEWEB)

    Glamheden, Rune; Fredriksson, Anders (Golder Associates AB (SE)); Roeshoff, Kennert; Karlsson, Johan (Berg Bygg Konsult AB (SE)); Hakami, Hossein (Itasca Geomekanik AB (SE)); Christiansson, Rolf (Swedish Nuclear Fuel and Waste Management Co., Stockholm (SE))

    2007-12-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterisation at two different locations, Forsmark and Laxemar/Simpevarp, with the objective of siting a geological repository for spent nuclear fuel. The characterisation of a site is an integrated work carried out by several disciplines including geology, rock mechanics, thermal properties, hydrogeology, hydrogeochemistry and surface systems. This report presents the rock mechanics model of the Forsmark site up to stage 2.2. The scope of work has included compilation and analysis of primary data of intact rock and fractures, estimation of the rock mass mechanical properties and estimation of the in situ state of stress at the Forsmark site. The laboratory results on intact rock and fractures in the target volume demonstrate a good quality rock mass that is strong, stiff and relatively homogeneous. The homogeneity is also supported by the lithological and the hydrogeological models. The properties of the rock mass have been initially estimated by two separate modelling approaches, one empirical and one theoretical. An overall final estimate of the rock mass properties were achieved by integrating the results from the two models via a process termed 'Harmonization'. Both the tensile tests, carried out perpendicular and parallel to the foliation, and the theoretical analyses of the rock mass properties in directions parallel and perpendicular to the major principal stress, result in parameter values almost independent of direction. This indicates that the rock mass in the target volume is isotropic. The rock mass quality in the target volume appears to be of high and uniform quality. Those portions with reduced rock mass quality that do exist are mainly related to sections with increased fracture frequency. Such sections are associated with deformation zones according to the geological description. The results of adjacent rock domains and fracture domains of the target

  20. The International Classification of Functioning, Disability and Health: a unifying model for the conceptual description of physical and rehabilitation medicine.

    Science.gov (United States)

    Stucki, Gerold; Melvin, John

    2007-05-01

    There is a need to develop a contemporary and internationally accepted conceptual description of physical and rehabilitation medicine (PRM). The process of evolving such a definition can now rely on the unifying conceptual model and taxonomy of the International Classification of Functioning, Disability and Health (ICF) and an ICF-based conceptual description of rehabilitation understood as a health strategy. The PRM section of the European Union of Medical Specialists (UEMS) has endorsed the application of the ICF as a unifying conceptual model for PRM and supports the process of moving towards an "ICF-based conceptual description and according definitions of PRM". With this goal in mind, the authors have developed a first tentative conceptual description in co-operation with the professional practice committee of the UEMS-PRM-section. A respective brief definition describes PRM as the medical specialty that, based on the assessment of functioning and including the diagnosis and treatment of health conditions, performs, applies and co-ordinates biomedical and engineering and a wide range of other interventions with the goal of optimizing functioning of people experiencing or likely to experience disability. Readers of the Journal of Rehabilitation Medicine are invited to contribute to the process of achieving an internationally accepted ICF-based conceptual description of PRM by submitting commentaries to the Editor of this journal.

  1. The International Classification of Functioning, Disability and Health (ICF): a unifying model for the conceptual description of the rehabilitation strategy.

    Science.gov (United States)

    Stucki, Gerold; Cieza, Alarcos; Melvin, John

    2007-05-01

    An important basis for the successful development of rehabilitation practice and research is a conceptually sound description of rehabilitation understood as a health strategy based on a universally accepted conceptual model and taxonomy of human functioning. With the approval of the International Classification of Functioning, Disability and Health (ICF) by the World Health Assembly in 2001 and the reference to the ICF in the World Health Assembly's resolution on "Disability, including prevention, management and rehabilitation" in 2005, we can now rely on a universally accepted conceptual model. It is thus time to initiate the process of evolving an ICF-based conceptual description that can serve as a basis for similar conceptual descriptions and according definitions of the professions applying the rehabilitation strategy and of distinct scientific fields of human functioning and rehabilitation research. In co-operation with the Physical and Rehabilitation Medicine (PRM) section of the European Union of Medical Specialists (UEMS) and its professional practice committee, we present a first tentative version of an ICF-based conceptual description in this paper. A brief definition describes rehabilitation as the health strategy applied by PRM and professionals in the health sector and across other sectors that aims to enable people with health conditions experiencing or likely to experience disability to achieve and maintain optimal functioning in interaction with the environment. Readers of the Journal of Rehabilitation Medicine are invited to contribute towards achieving an internationally accepted ICF-based conceptual description of rehabilitation by submitting commentaries to the Editor of this journal.

  2. Revision of fossil Metretopodidae (Insecta: Ephemeroptera) in Baltic amber-Part 3: Description of two new species of Siphloplecton Clemens, 1915, with notes on the re-discovered lectotype of Siphloplecton macrops (Pictet-Baraban & Hagen, 1856).

    Science.gov (United States)

    Staniczek, Arnold H; Godunko, Roman J

    2016-04-11

    In this contribution, we provide a complementary description of the re-discovered lectotype of Siphloplecton macrops (Pictet-Baraban & Hagen, 1856). Additionally, complementary descriptions of S. barabani Staniczek & Godunko, 2012 and S. picteti Staniczek & Godunko, 2012 based on new material are given. Two new species, S. sartorii sp. nov. and S. gattolliati sp. nov., are described from male imagines and attributed to two newly defined species groups within Siphloplecton.

  3. Editors' note.

    Science.gov (United States)

    Cohn, Ellen R; Cason, Jana

    2014-01-01

    The Fall 2014 issue of the International Journal of Telerehabilitation (IJT) contains original research that evaluates the role of teletherapy and online language exercises in the treatment of chronic aphasia; investigates whether improvements are maintained after in-home pulmonary telerehabilitation for patients with chronic obstructive pulmonary disease; and studies the use of in-home telerehabilitation for proximal humerus fractures. Within the context of two case studies, authors evaluated three service delivery models (direct, hybrid, and telepractice) for stuttering intervention. The results of a preliminary qualitative investigation are presented for telepractice in rural schools in Australia. And, schemas are offered for privacy and security analyses for store and forward applications in physical and occupational therapy. The Fall 2014 issue also contains a book review, and announcements from the American Telemedicine Association and the Mid-Atlantic Telehealth Resource Center.

  4. Editors' Note

    Directory of Open Access Journals (Sweden)

    Ellen R. Cohn

    2015-01-01

    Full Text Available The Fall 2014 issue of the International Journal of Telerehabilitation (IJT contains original research that evaluates the role of teletherapy and online language exercises in the treatment of chronic aphasia; investigates whether improvements are maintained after in-home pulmonary telerehabilitation for patients with chronic obstructive pulmonary disease; and studies the use of in-home telerehabilitation for proximal humerus fractures. Within the context of two case studies, an author evaluated three service delivery models (direct, hybrid, and telepractice for stuttering intervention. The results of a preliminary qualitative investigation are presented for telepractice in rural schools in Australia. And, schemas are offered for privacy and security analyses for store and forward applications in physical and occupational therapy. The Fall 2014 issue also contains a book review, and announcements from the American Telemedicine Association and the Mid-Atlantic Telehealth Resource Center.

  5. The influence of visual experience on the ability to form spatial mental models based on route and survey descriptions

    NARCIS (Netherlands)

    Noordzij, Matthijs Leendert; Zuidhoek, Sander; Postma, Albert

    2006-01-01

    The purpose of the present study is twofold: the first objective is to evaluate the importance of visual experience for the ability to form a spatial representation (spatial mental model) of fairly elaborate spatial descriptions. Secondly, we examine whether blind people exhibit the same preferences

  6. Editor's Note

    Directory of Open Access Journals (Sweden)

    Daniel Shanahan

    2017-01-01

    Full Text Available THIS issue marks the second of two special issues focusing on corpus approaches to musicological and music-theoretical research. What began as a simple call for papers turned into a fairly ambitious project, and I couldn't be more pleased with the result. The range and depth of the articles in these two issues demonstrates the level of scholarly work being conducted in this growing area of research. In this issue, Derek Strykowski's article on text-painting in Marenzio's madrigals provides a model for how one might search address the often difficult-to-test notion of text-painting, and Craig Sapp's commentary is a nice supplemental discussion of the topic, offering avenues of future research. Fernando Benadon's analysis of roughly 30,000 onset times in Afro-Cuban drumming focuses on the notion of "near onsets" and "onset clusters", and Peter Marten's commentary argues that, while this might be difficult to perceive, the methodology demonstrates an excellent model for future research. Steven Cannon's analysis of the form of 19th-century symphonies is enlightening, and provides a nice empirical backing to much of the extant literature on the repertoire, and Ben Duane's response provides a nice commentary on future directions and possible methodological improvements. Caitlyn Trevor and David Huron's article on the usage of open strings in nominally sad music deftly bridges emotion research and instrumental affordances, and Daniel Müllensiefen's commentary praises the methodology, laments the negative results, and issues a call for more negative results to be published. Perhaps the most unique aspect of Empirical Musicology Review is the "open peer review" format it pioneered a decade ago. This issue contains a number of commentaries —and responses to commentaries— that fit within that vision. Nat Condit-Schultz and Mitch Ohriner take two fascinating but different approaches to the notion of "flow" in hip-hop, and provide insightful

  7. Editor's Note

    Directory of Open Access Journals (Sweden)

    Daniel Shanahan

    2016-07-01

    Full Text Available CORPUS studies have increasingly been of interest to music theorists, musicologists, and music psychology researchers, as is evident in the sheer number of excellent submissions to this special issue. The breadth and depth of these articles, as well as the insightful commentaries, make it seem only fitting to publish over two issues. The current issue contains five articles, eight commentaries, and one research report, and covers folk music, post-tonal music, jazz, Western art music, and the popular music found on Youtube. Eerola presents a model of melodic entropy that provides a nice framework for future information-theoretic work, while Roger Dean and Marcus Pearce present a new approach to modelling pitch-structure in post-tonal music. Frieler, Pfleiderer, Abeßer, and Zaddach give an analysis of jazz solos that demonstrates the role of a narrative arcs in improvisation. White and Quinn present a new corpus that makes use of vast compilations of web-based MIDI data, and demonstrates how such a corpus might be facilitate future musicological and music-theoretic research. Plazak focuses on Youtube as a corpus, and argues that the mutability of such a corpus facilitates our understanding of musical communication, as well as the important role of the listener in defining and re-defining such a dataset. It's encouraging to me both as an editor and practitioner of corpus methods that so many of those heavily involved with the field contributed to these two issues as either an author or a commentator. This issue also brings a number of changes on other fronts. Firstly, Nicola Dibben and Renee Timmers, who served as the journal's editors since Volume 7, have completed their editorial terms. They oversaw the transformation of the journal into a new Open Journal Systems platform, and were able to consistently produce issues that set a very high standard. Under their leadership, the journal both increased its accessibility (we now average more than 1

  8. Regional hydrogeological simulations for Forsmark - numerical modelling using CONNECTFLOW. Preliminary site description Forsmark area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, Lee; Cox, Ian; Hunter, Fiona; Jackson, Peter; Joyce, Steve; Swift, Ben [Serco Assurance, Risley (United Kingdom); Gylling, Bjoern; Marsic, Niko [Kemakta Konsult AB, Stockholm (Sweden)

    2005-05-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) carries out site investigations in two different candidate areas in Sweden with the objective of describing the in-situ conditions for a bedrock repository for spent nuclear fuel. The site characterisation work is divided into two phases, an initial site investigation phase (IPLU) and a complete site investigation phase (KPLU). The results of IPLU are used as a basis for deciding on a subsequent KPLU phase. On the basis of the KPLU investigations a decision is made as to whether detailed characterisation will be performed (including sinking of a shaft). An integrated component in the site characterisation work is the development of site descriptive models. These comprise basic models in three dimensions with an accompanying text description. Central in the modelling work is the geological model, which provides the geometrical context in terms of a model of deformation zones and the rock mass between the zones. Using the geological and geometrical description models as a basis, descriptive models for other geo-disciplines (hydrogeology, hydro-geochemistry, rock mechanics, thermal properties and transport properties) will be developed. Great care is taken to arrive at a general consistency in the description of the various models and assessment of uncertainty and possible needs of alternative models. Here, a numerical model is developed on a regional-scale (hundreds of square kilometres) to understand the zone of influence for groundwater flow that affects the Forsmark area. Transport calculations are then performed by particle tracking from a local-scale release area (a few square kilometres) to identify potential discharge areas for the site and using greater grid resolution. The main objective of this study is to support the development of a preliminary Site Description of the Forsmark area on a regional-scale based on the available data of 30 June 2004 and the previous Site Description. A more specific

  9. Mise au point d' un modele cartographique pour la description des stations forestieres en Ardenne belge

    Directory of Open Access Journals (Sweden)

    Lejeune P.

    2002-01-01

    Full Text Available Development of a cartographic mdel for the forest site types delineation in the Belgian Ardenne. The paper presents an original method dealing with the forest site types delineation. The suggested method consists in integrating a typological key in a GIS aiming at producing a thematic map that describes forest site types. Data used are the soil map of Belgium (digitized at the scale 1:20,000 and a digital elevation model built from a topographic map (scale 1:10,000. The typological key is mainly based on the methodology used by Thill et al. (1988 in the site types system for central Ardenne, the potential vegetation map of Sougnez and Dethioux (1975 and the ecoregion map of Delvaux and Galoux (1962. In that respect, site types are closely linked to the soil map and the phytosociological classification. So, they can be connected to the afforestation guide and different phytosociological and autecological studies concerning forest species. It is then possible to map the potential habitats or the site potentialities related to tree species. The key is valid for the Ardenne ecoregion located in Southern Belgium (elevation higher than 300 m. It has to be validated through an intensive use in the field, taking into account its imprecision linked to the types of collected data, chieffly those being digitized. The integration of such a tool in a SIG can be considered as an original way in terms of integrated forest management or forest sites description in the context of the project ""Natura 2000"" launched by the European Union. The study has been carried out within the framework of an experimental integrated management project concerning the Saint-Hubert forest (17,000 ha.

  10. Editors' Note

    Directory of Open Access Journals (Sweden)

    Ellen R. Cohn

    2015-11-01

    Full Text Available The Fall 2015 issue of the International Journal of Telerehabilitation (IJT presents the original work of three distinguished and innovative interdisciplinary teams.  Interdisciplinarity is also a hallmark of the IJT editorial staff, reviewers, and publishing team.The first article is a product of engineers with expertise in computing science (LoPresti and Simpson and a medical speech-language pathologist (Jinks who practices in the area of assistive technology. These authors reported upon the degree to which consumers are satisfied with the provision of telerehabilitation services for augmentative and alternative communication or alternative computer accessibility.A second article, by Proffitt, (occupational therapist and Lange, (a physiotherapist with expertise in the use of interactive video games and virtual reality technologies demonstrated the feasibility of employing a 6-week, game-based, in-home telerehabilitation exercise program using the Microsoft Kinect® for individuals with chronic stroke.Finally, the third article co-authored by Watzlaf (health information management, with degrees in public health and epidemiology, DeAlmeida (health information systems, with a degree in cell and molecular biology, Zhou (with degrees in computer science and physics, and expertise in mathematical modeling on health related topics, information integration, and comparative genomics, and Hartman (a reference librarian with a degree in chemistry, who collaborates with faculty in the health sciences and serves as a liaison to a school of health and rehabilitation sciences describes a protocol to conduct systematic reviews of research in telerehabilitation, with the aim that IJT readers can ultimately apply this protocol to identify best practices in telerehabilitation.

  11. NOTES: a review.

    Science.gov (United States)

    Mansard, Magnus Jayaraj; Reddy, D Nageshwar; Rao, G Venkat

    2009-01-01

    A few years ago a new approach to performing abdominal surgery was presented, i.e. via the natural body orifices using endoscopes. The interest and research in this approach progressed very rapidly, in spite of the initial skepticism. It was initially demonstrated in animal models, then in human beings and has now very nearly become routine practice. This article reviews the development of natural orifice transluminal endoscopic surgery (NOTES), its benefits and the hurdles we have yet to overcome.

  12. Explorative analysis of microbes, colloids and gases together with microbial modelling. Site description model SDM-Site Laxemar

    International Nuclear Information System (INIS)

    Hallbeck, Lotta; Pedersen, Karsten

    2008-08-01

    The work has involved the development of descriptive and mathematical models for groundwaters in relation to rock domains, fracture domains and deformation zones. Past climate changes are the major driving force for hydrogeochemical changes and therefore of fundamental importance for understanding the palaeohydrogeological, palaeohydrogeochemical and present evolution of groundwater in the crystalline bedrock of the Fennoscandian Shield. Understanding current undisturbed hydrochemical conditions at the proposed repository site is important when predicting future changes in groundwater chemistry. The causes of copper corrosion and/or bentonite degradation are of particular interest as they may jeopardise the long-term integrity of the planned SKB repository system. Thus, the following variables are considered for the hydrogeochemical site descriptive modelling: pH, Eh, sulphur species, iron, manganese, carbonate, phosphate, nitrogen species, total dissolved solids (TDS), isotopes, colloids, fulvic and humic acids and microorganisms. In addition, dissolved gases (e.g. carbon dioxide, methane and hydrogen) are of interest because of their likely participation in microbial reactions. In this series of reports, the final hydrogeochemical evaluation work of the site investigation at the Laxemar site, is presented. The work was conducted by SKB's hydrogeochemical project group, ChemNet, which consists of independent consultants and Univ. researchers with expertise in geochemistry, hydrochemistry, hydrogeochemistry, microbiology, geomicrobiology, analytical chemistry etc. The resulting site descriptive model version, mainly based on available primary data from the extended data freeze L2.3 (Nov 2007). This report focuses on microbiology, colloids and gases. Several methods must be used to characterise active microbial communities in groundwater. Microbial parameters of interest are the total number of cells (TNC) and the presence of various metabolic groups of

  13. Explorative analysis of microbes, colloids and gases together with microbial modelling. Site description model SDM-Site Laxemar

    Energy Technology Data Exchange (ETDEWEB)

    Hallbeck, Lotta; Pedersen, Karsten (Microbial Analytics Sweden AB, Goeteborg (Sweden))

    2008-08-15

    The work has involved the development of descriptive and mathematical models for groundwaters in relation to rock domains, fracture domains and deformation zones. Past climate changes are the major driving force for hydrogeochemical changes and therefore of fundamental importance for understanding the palaeohydrogeological, palaeohydrogeochemical and present evolution of groundwater in the crystalline bedrock of the Fennoscandian Shield. Understanding current undisturbed hydrochemical conditions at the proposed repository site is important when predicting future changes in groundwater chemistry. The causes of copper corrosion and/or bentonite degradation are of particular interest as they may jeopardise the long-term integrity of the planned SKB repository system. Thus, the following variables are considered for the hydrogeochemical site descriptive modelling: pH, Eh, sulphur species, iron, manganese, carbonate, phosphate, nitrogen species, total dissolved solids (TDS), isotopes, colloids, fulvic and humic acids and microorganisms. In addition, dissolved gases (e.g. carbon dioxide, methane and hydrogen) are of interest because of their likely participation in microbial reactions. In this series of reports, the final hydrogeochemical evaluation work of the site investigation at the Laxemar site, is presented. The work was conducted by SKB's hydrogeochemical project group, ChemNet, which consists of independent consultants and Univ. researchers with expertise in geochemistry, hydrochemistry, hydrogeochemistry, microbiology, geomicrobiology, analytical chemistry etc. The resulting site descriptive model version, mainly based on available primary data from the extended data freeze L2.3 (Nov 2007). This report focuses on microbiology, colloids and gases. Several methods must be used to characterise active microbial communities in groundwater. Microbial parameters of interest are the total number of cells (TNC) and the presence of various metabolic groups of

  14. A land surface model combined with a crop growth model for paddy rice (MATCRO-Rice v. 1 – Part 1: Model description

    Directory of Open Access Journals (Sweden)

    Y. Masutomi

    2016-11-01

    Full Text Available Crop growth and agricultural management can affect climate at various spatial and temporal scales through the exchange of heat, water, and gases between land and atmosphere. Therefore, simulation of fluxes for heat, water, and gases from agricultural land is important for climate simulations. A land surface model (LSM combined with a crop growth model (CGM, called an LSM-CGM combined model, is a useful tool for simulating these fluxes from agricultural land. Therefore, we developed a new LSM-CGM combined model for paddy rice fields, the MATCRO-Rice model. The main objective of this paper is to present the full description of MATCRO-Rice. The most important feature of MATCRO-Rice is that it can consistently simulate latent and sensible heat fluxes, net carbon uptake by crop, and crop yield by exchanging variables between the LSM and CGM. This feature enables us to apply the model to a wide range of integrated issues.

  15. Comparison of site descriptive models for Olkiluoto, Finland and Forsmark, Sweden

    Energy Technology Data Exchange (ETDEWEB)

    Geier, J.; Bath, A.; Stephansson, O.; Luukkonen, A.

    2012-08-15

    The proposed high-level radioactive waste repository sites at Olkiluoto and Forsmark share broadly similar geologic histories and regional settings. Despite differences in lithology, rock strength and patterns of brittle deformation, the sites show similarities in terms of hydrogeochemistry and hydrogeology. These similarities reflect a dominating influence of saline and brackish water intrusion during inundation by the postglacial Littorina Sea and Baltic Sea, followed by exposure to meteoric waters following postglacial uplift and transition to a Baltic coastal setting. Both sites also contain deep bedrock saline groundwater, though this is more evident at Olkiluoto than at Forsmark. A comparative study of site descriptive models for the two sites identifies the following key differences that could potentially impact safety of a repository: (1) Redox controls, buffering and biogeochemistry at proposed repository depths; (2) Salinity gradients at and below proposed repository depths; (3) Methane concentrations at and below proposed repository depths; (4) Depths to which glacial water and Littorina water penetrated; (5) Cation hydrogeochemistry and water-rock reaction; (6) Pore water compositions in rock matrix; (7) Rock fabric, secondary minerals and alteration with respect to radionuclide retention; (8) Brittle deformation fabric differences on multiple scales that affect vertical hydraulic conductivity; (9) Differences in apparent frequency of encountering water-conducting networks at proposed repository depths; (10) Shallow bedrock hydraulic properties; (11) Unique intrusive or dissolution features; (12) Connectivity of site-scale models to regional-scale features; (13) Mesoproterozoic rocks in vicinity and possibilities for human-intrusion scenarios; (14) Rock stresses and bedrock strength and deformability at proposed repository depths; (15) Thermal anisotropy. These differences are all potentially significant to safety functions, but none are so severe that

  16. Geological evolution, palaeoclimate and historical development of the Forsmark and Laxemar-Simpevarp areas. Site descriptive modelling SDM-Site

    International Nuclear Information System (INIS)

    Soederbaeck, Bjoern

    2008-06-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterization at two different locations, the Forsmark and Laxemar-Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The site investigations started in 2002 and were completed in 2007. The analysis and modelling of data from the site investigations, which have taken place during and after these investigations, provide a foundation for the development of an integrated, multidisciplinary site descriptive model (SDM) for each of the two sites. A site descriptive model constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere, as well as those natural processes that affect or have affected their long-term development. Hitherto, a number of reports presenting preliminary site descriptive models for Forsmark and Laxemar-Simpevarp have been published. In these reports, the evolutionary and historical aspects of the site were included in a separate chapter. The present report comprises a further elaboration of the evolutionary and historical information included in the preliminary SDM reports, but presented here in a separate, supplementary report to the final site description, SDM-Site. The report is common to the two investigated areas, and the overall objective is to describe the long-term geological evolution, the palaeoclimate, and the post-glacial development of ecosystems and of the human population at the two sites. The report largely consists of a synthesis of information derived from the scientific literature and other sources not related to the site investigations. However, considerable information from the site investigations that has contributed to our understanding of the past development at each site is also included. This unique synthesis of both published information in a regional perspective and new site-specific information breaks new ground in our understanding

  17. Geological evolution, palaeoclimate and historical development of the Forsmark and Laxemar-Simpevarp areas. Site descriptive modelling SDM-Site

    Energy Technology Data Exchange (ETDEWEB)

    Soederbaeck, Bjoern (ed.)

    2008-06-15

    The Swedish Nuclear Fuel and Waste Management Company (SKB) is undertaking site characterization at two different locations, the Forsmark and Laxemar-Simpevarp areas, with the objective of siting a geological repository for spent nuclear fuel. The site investigations started in 2002 and were completed in 2007. The analysis and modelling of data from the site investigations, which have taken place during and after these investigations, provide a foundation for the development of an integrated, multidisciplinary site descriptive model (SDM) for each of the two sites. A site descriptive model constitutes a description of the site and its regional setting, covering the current state of the geosphere and the biosphere, as well as those natural processes that affect or have affected their long-term development. Hitherto, a number of reports presenting preliminary site descriptive models for Forsmark and Laxemar-Simpevarp have been published. In these reports, the evolutionary and historical aspects of the site were included in a separate chapter. The present report comprises a further elaboration of the evolutionary and historical information included in the preliminary SDM reports, but presented here in a separate, supplementary report to the final site description, SDM-Site. The report is common to the two investigated areas, and the overall objective is to describe the long-term geological evolution, the palaeoclimate, and the post-glacial development of ecosystems and of the human population at the two sites. The report largely consists of a synthesis of information derived from the scientific literature and other sources not related to the site investigations. However, considerable information from the site investigations that has contributed to our understanding of the past development at each site is also included. This unique synthesis of both published information in a regional perspective and new site-specific information breaks new ground in our understanding

  18. Special feature: a multifacet circumplex model of personality as a basis for the description and therapy of personality disorders.

    Science.gov (United States)

    Becker, P

    1998-01-01

    A new circumplex model of personality, based upon two higher order personality factors, mental health and behavior control, is presented. This eight-octant model, which also includes the two multifacet dimensions of "social adaptation vs. unrestraint" and "self-actualization vs. inhibition," should not be confused with two other well-known circumplex models: the interpersonal model and the Eysenck model. Mental health, a multifacet construct, is defined as the ability to cope with external and internal demands. Behavior control, also a multifacet construct, is characterized by self-control (norm-, future-, work-, and reason-orientation; orderliness) vs. spontaneity (hedonism, excitement seeking, feeling orientation, liveliness). The theoretical background and facets of these constructs are presented. The model is useful for the description of personality disorders, and etiological hypotheses are formulated from the combination of this model with a circumplex model of interpersonal behavior. Finally, some therapeutic implications of the model are discussed.

  19. Re-description of Daphnia (Ctenodaphnia from lakes in the Khumbu Region, Nepalese Himalayas, with the erection of a new species, Daphnia himalaya, and a note on an intersex individual

    Directory of Open Access Journals (Sweden)

    Dinora Carolina PEÑALVA-ARANA

    2006-08-01

    Full Text Available We present here a detailed description of Ctenodaphnia-type Daphnia specimens collected from lakes in the Nepalese Himalayas between 1994 and 2004, including mature females and adult males. The specimens examined share certain diagnostic traits with Daphnia tibetana (Sars 1903, and others with Daphnia fusca (Gurney 1906. A re-appraisal of their previous synonymy with D. fusca and a comparison with all published descriptions of similar species from the region indicate that they represent a new species named here as Daphnia himalaya. The chance discovery of a sex intergrade of the same species allowed a description of the secondary sexual characteristics in this interesting and rare intermediate state to be reported, and its possible ecological implications to be discussed, as well.

  20. Description and Reconstruction of Soil Structure Using Correlation Functions: Morphological and Pore-Scale Modeling Study

    Science.gov (United States)

    Karsanina, M.; Gerke, K.; Vasilyev, R.; Skvortsova, E. B.; Korost, D. V.; Mallants, D.

    2013-12-01

    It is now well-established that structure of porous or composite media (i.e., distribution of different materials or phases) defines all physical properties, including multi-phase flow and solute transport. To characterize soil structure conventional soil science uses such metrics as grain size distribution, morphology or numerous classifications. However, all these descriptors provide only limited and often qualitative information about structural properties, cannot be used to reconstruct real structure or predict physical properties. With the progress of modern non-destructive analysis tools we can obtain detailed 3D structure information and use it for calculation of any physical property. Such 3D data is a valuable verification dataset to check the usefulness of soil structure description using stochastic measures such as correlation functions. Any potential soil structure descriptor should possess two main features: 1) represent structure in some mathematical way, 2) reconstruction based on this mathematical function alone should be statistically equal to the original structure (e.g., have similar pore size distributions, physical properties, etc.). To check the applicability to soil science, we choose different 2D and 3D segmented soil images and calculated their correlation function. The modified Yeong-Torquato procedure was then used to reconstruct images based on calculated correlation functions. This method was applied to three different soil datasets: 1) a set of 2D thin-sections, 2) 3D images of soils with known hydraulic properties (Ksat and WRC), 3) 3D images of soils and aggregates from the same soil profile, but different genetic horizons. In the first case, we use conventional morphological descriptors in 2D original and reconstructed images (pore size, shapes and orientations) to quantify reconstructions quality. In the second case, we use pore-network models extracted from original and reconstructed 3D images to calculate Ksat, WRC and relative

  1. Strategy for a Rock Mechanics Site Descriptive Model. Development and testing of the empirical approach

    Energy Technology Data Exchange (ETDEWEB)

    Roeshoff, Kennert; Lanaro, Flavio [Berg Bygg Konsult AB, Stockholm (Sweden); Lanru Jing [Royal Inst. of Techn., Stockholm (Sweden). Div. of Engineering Geology

    2002-05-01

    This report presents the results of one part of a wide project for the determination of a methodology for the determination of the rock mechanics properties of the rock mass for the so-called Aespoe Test Case. The Project consists of three major parts: the empirical part dealing with the characterisation of the rock mass by applying empirical methods, a part determining the rock mechanics properties of the rock mass through numerical modelling, and a third part carrying out numerical modelling for the determination of the stress state at Aespoe. All Project's parts were performed based on a limited amount of data about the geology and mechanical tests on samples selected from the Aespoe Database. This Report only considers the empirical approach. The purpose of the project is the development of a descriptive rock mechanics model for SKBs rock mass investigations for a final repository site. The empirical characterisation of the rock mass provides correlations with some of the rock mechanics properties of the rock mass such as the deformation modulus, the friction angle and cohesion for a certain stress interval and the uniaxial compressive strength. For the characterisation of the rock mass, several empirical methods were analysed and reviewed. Among those methods, some were chosen because robust, applicable and widespread in modern rock mechanics. Major weight was given to the well-known Tunnel Quality Index (Q) and Rock Mass Rating (RMR) but also the Rock Mass Index (RMi), the Geological Strength Index (GSI) and Ramamurthy's Criterion were applied for comparison with the two classical methods. The process of: i) sorting the geometrical/geological/rock mechanics data, ii) identifying homogeneous rock volumes, iii) determining the input parameters for the empirical ratings for rock mass characterisation; iv) evaluating the mechanical properties by using empirical relations with the rock mass ratings; was considered. By comparing the methodologies involved

  2. Uncertainty analysis of a one-dimensional constitutive model for shape memory alloy thermomechanical description

    DEFF Research Database (Denmark)

    Oliveira, Sergio A.; Savi, Marcelo A.; Santos, Ilmar F.

    2014-01-01

    The use of shape memory alloys (SMAs) in engineering applications has increased the interest of the accuracy analysis of their thermomechanical description. This work presents an uncertainty analysis related to experimental tensile tests conducted with shape memory alloy wires. Experimental data...

  3. DEMON - A Media Object Model Incorporating Natural Language Descriptions for Retrieval Support

    Science.gov (United States)

    1990-02-01

    related to Beethoven " illustrates this kind of ap- plication. The multimedia system can contain a picture of Beethoven , a book or letters of Beethoven ...and a set of sound recordings of Beethoven’s music , for instance. class MO_SET (subclass of SET) select (mo-setidl, [x: MO_contents(x, Description)]) By

  4. The Need (?) for Descriptive Geometry in a World of 3D Modeling.

    Science.gov (United States)

    Croft, Frank M. Jr.

    1998-01-01

    Evaluates the use of modern CAD methods to solve geometric problems. Solves descriptive geometry problems using the layout and position of the successive auxiliary views from the projection of three-dimensional figures onto a two-dimensional plane of paper. (CCM)

  5. Audio Bigrams as a Unifying Model of Pitch-based Song Description

    NARCIS (Netherlands)

    Van Balen, Jan|info:eu-repo/dai/nl/352221860; Wiering, Frans|info:eu-repo/dai/nl/141928034; Veltkamp, Remco|info:eu-repo/dai/nl/084742984

    2015-01-01

    In this paper we provide a novel perspective on a family of music description algorithms that perform what could be referred to as `soft' audio fingerprinting. These algorithms convert fragments of musical audio to one or more fixed-size vectors that can be used in distance computation and indexing,

  6. [Exploring the changes of inheritance model of medical knowledge as viewed from the description of physicians in the Song Dynasty].

    Science.gov (United States)

    Zhang, Haipeng

    2014-11-01

    From the Southern and Northern Dynasties to the beginning of the Northern Song Dynasty, the models of "master and apprentice" and "physician of long family tradition for generations" were the main ways for teaching medical knowledge. With the rapid amassment of medical books in the Song Dynasty, "reading text" became increasingly important and prominent in the inheritance of medical knowledge, which could be seen clearly from the descriptions on physicians in the Song Dynasty. For instance, Hao Yun's medical knowledge was recorded as a model of "master and apprentice" in Hao Yun's Epitaph written by Zhang Xun. However, in Ye Mengde's description, this model was played down, while at the same time, "reading text" was emphasized. Pang Anshi, though coming from a physician family for generations, got rid of some medical knowledge from his own family and turned to the medical knowledge by "reading text". According to Pang Anshi's Epitaph written by Zhang Lei and Fang ji Zhuan (Biography of Technicians) in Song shi (The Song History), Pang Anshi was a typical model of becoming a famous physician by "reading text". In the Epitaph, Pang Anshi's brilliance was stressed, and in the latter, "reading text" was more important and the family tradition was denied. In the description of the Song Dynasty, Chen Zhaoyu's wonderful medical skills was coming from the "practice", and "reading text" was denied right away. What is more, "reading text" was introspected and criticized through Chen Zhaoyu's lip. The different descriptions of the Song Dynasty reflected the change of inheritance model of medical knowledge.

  7. Toward a minimal representation of aerosols in climate models: description and evaluation in the Community Atmosphere Model CAM5

    Directory of Open Access Journals (Sweden)

    X. Liu

    2012-05-01

    Full Text Available A modal aerosol module (MAM has been developed for the Community Atmosphere Model version 5 (CAM5, the atmospheric component of the Community Earth System Model version 1 (CESM1. MAM is capable of simulating the aerosol size distribution and both internal and external mixing between aerosol components, treating numerous complicated aerosol processes and aerosol physical, chemical and optical properties in a physically-based manner. Two MAM versions were developed: a more complete version with seven lognormal modes (MAM7, and a version with three lognormal modes (MAM3 for the purpose of long-term (decades to centuries simulations. In this paper a description and evaluation of the aerosol module and its two representations are provided. Sensitivity of the aerosol lifecycle to simplifications in the representation of aerosol is discussed.

    Simulated sulfate and secondary organic aerosol (SOA mass concentrations are remarkably similar between MAM3 and MAM7. Differences in primary organic matter (POM and black carbon (BC concentrations between MAM3 and MAM7 are also small (mostly within 10%. The mineral dust global burden differs by 10% and sea salt burden by 30–40% between MAM3 and MAM7, mainly due to the different size ranges for dust and sea salt modes and different standard deviations of the log-normal size distribution for sea salt modes between MAM3 and MAM7. The model is able to qualitatively capture the observed geographical and temporal variations of aerosol mass and number concentrations, size distributions, and aerosol optical properties. However, there are noticeable biases; e.g., simulated BC concentrations are significantly lower than measurements in the Arctic. There is a low bias in modeled aerosol optical depth on the global scale, especially in the developing countries. These biases in aerosol simulations clearly indicate the need for improvements of aerosol processes (e.g., emission fluxes of anthropogenic aerosols and

  8. A New Browser-based, Ontology-driven Tool for Generating Standardized, Deep Descriptions of Geoscience Models

    Science.gov (United States)

    Peckham, S. D.; Kelbert, A.; Rudan, S.; Stoica, M.

    2016-12-01

    Standardized metadata for models is the key to reliable and greatly simplified coupling in model coupling frameworks like CSDMS (Community Surface Dynamics Modeling System). This model metadata also helps model users to understand the important details that underpin computational models and to compare the capabilities of different models. These details include simplifying assumptions on the physics, governing equations and the numerical methods used to solve them, discretization of space (the grid) and time (the time-stepping scheme), state variables (input or output), model configuration parameters. This kind of metadata provides a "deep description" of a computational model that goes well beyond other types of metadata (e.g. author, purpose, scientific domain, programming language, digital rights, provenance, execution) and captures the science that underpins a model. While having this kind of standardized metadata for each model in a repository opens up a wide range of exciting possibilities, it is difficult to collect this information and a carefully conceived "data model" or schema is needed to store it. Automated harvesting and scraping methods can provide some useful information, but they often result in metadata that is inaccurate or incomplete, and this is not sufficient to enable the desired capabilities. In order to address this problem, we have developed a browser-based tool called the MCM Tool (Model Component Metadata) which runs on notebooks, tablets and smart phones. This tool was partially inspired by the TurboTax software, which greatly simplifies the necessary task of preparing tax documents. It allows a model developer or advanced user to provide a standardized, deep description of a computational geoscience model, including hydrologic models. Under the hood, the tool uses a new ontology for models built on the CSDMS Standard Names, expressed as a collection of RDF files (Resource Description Framework). This ontology is based on core concepts

  9. Atomistic Modeling of the Negative Thermal Expansion in δ- Plutonium Based on the Two-State Description.

    Science.gov (United States)

    Lee, Tongsik; Baskes, Michael I; Lawson, A C; Chen, Shao Ping; Valone, Steven M

    2012-06-07

    The δ phase of plutonium with the fcc structure exhibits an unusual negative thermal expansion (NTE) over its narrow temperature range of stability, 593-736 K. An accurate description of the anomalous high-temperature volume effect of plutonium goes beyond the current capability of electronic-structure calculations. We propose an atomistic scheme to model the thermodynamic properties of δ-Pu based on the two-state model of Weiss for the Invar alloys, inspired by the simple free-energy analysis previously conducted by Lawson et al. The two-state mechanism is incorporated into the atomistic description of a many-body interacting system. Two modified embedded atom method potentials are employed to represent the binding energies of two competing electronic states in δ-Pu. We demonstrate how the NTE takes place in δ-Pu by means of Monte Carlo simulations implemented with the two-state mechanism.

  10. Regional hydrogeological simulations. Numerical modelling using ConnectFlow. Preliminary site description Simpevarp sub area - version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, Lee; Hoch, Andrew; Hunter, Fiona; Jackson, Peter [Serco Assurance, Risley (United Kingdom); Marsic, Niko [Kemakta Konsult, Stockholm (Sweden)

    2005-02-01

    The Swedish Nuclear Fuel and Waste Management Company (SKB) carries out site investigations in two different candidate areas in Sweden with the objective of describing the in situ conditions for a bedrock repository for spent nuclear fuel. The two candidate areas are named Forsmark and Simpevarp. The site characterisation work is divided into two phases, an initial site investigation phase (IPLU) and a complete site investigation phase (KPLU). The results of IPLU are used as a basis for deciding on a subsequent KPLU phase. On the basis of the KPLU investigations a decision is made as to whether detailed characterisation will be performed (including sinking of a shaft).An integrated component in the site characterisation work is the development of site descriptive models. These comprise basic models in three dimensions with an accompanying text description. Central in the modelling work is the geological model which provides the geometrical context in terms of a model of deformation zones and the rock mass between the zones. Using the geological and geometrical description models as a basis, descriptive models for other geo-disciplines (hydrogeology, hydro-geochemistry, rock mechanics, thermal properties and transport properties) will be developed. Great care is taken to arrive at a general consistency in the description of the various models and assessment of uncertainty and possible needs of alternative models.Here, a numerical model is developed on a regional-scale (hundreds of square kilometres) to understand the zone of influence for groundwater flow that effects the Simpevarp area. Transport calculations are then performed by particle tracking from a local-scale release area (tens of square kilometres) to identify potential discharge areas for the site. The transport from the two site-scale release areas (a few square kilometres) at the Simpevarp site and the Laxemar site are also considered more specifically and using greater grid resolution.The main

  11. Improving the modelling of redshift-space distortions - I. A bivariate Gaussian description for the galaxy pairwise velocity distributions

    Science.gov (United States)

    Bianchi, Davide; Chiesa, Matteo; Guzzo, Luigi

    2015-01-01

    As a step towards a more accurate modelling of redshift-space distortions (RSD) in galaxy surveys, we develop a general description of the probability distribution function of galaxy pairwise velocities within the framework of the so-called streaming model. For a given galaxy separation r, such function can be described as a superposition of virtually infinite local distributions. We characterize these in terms of their moments and then consider the specific case in which they are Gaussian functions, each with its own mean μ and dispersion σ. Based on physical considerations, we make the further crucial assumption that these two parameters are in turn distributed according to a bivariate Gaussian, with its own mean and covariance matrix. Tests using numerical simulations explicitly show that with this compact description one can correctly model redshift-space distortions on all scales, fully capturing the overall linear and non-linear dynamics of the galaxy flow at different separations. In particular, we naturally obtain Gaussian/exponential, skewed/unskewed distribution functions, depending on separation as observed in simulations and data. Also, the recently proposed single-Gaussian description of RSD is included in this model as a limiting case, when the bivariate Gaussian is collapsed to a two-dimensional Dirac delta function. We also show how this description naturally allows for the Taylor expansion of 1 + ξS(s) around 1 + ξR(r), which leads to the Kaiser linear formula when truncated to second order, explicating its connection with the moments of the velocity distribution functions. More work is needed, but these results indicate a very promising path to make definitive progress in our programme to improve RSD estimators.

  12. Shell model description of 16O(p,γ)17F and 16O(p,p)16O reactions

    International Nuclear Information System (INIS)

    Bennaceur, K.; Michel, N.; Okolowicz, J.; Ploszajczak, M.; Bennaceur, K.; Nowacki, F.; Okolowicz, J.

    2000-01-01

    We present shell model calculations of both the structure of 17 F and the reactions 16 O(p,γ) 17 F, 16 O(p,p) 16 O. We use the ZBM interaction which provides a fair description of the properties of 16 O and neighbouring nuclei and, in particular it takes account for the complicated correlations in coexisting low-lying states of 16 O. (authors)

  13. Software Design Description for the HYbrid Coordinate Ocean Model (HYCOM), Version 2.2

    Science.gov (United States)

    2009-02-12

    dimension a(na,n),v(nv,n) I/O: print 115, 116 Uses: None tridcof Computes coefficients for tridiagonal matrix (dimension=kdm). Note: tcu (1) = 0 and tcl...kdm+1) = 0 are necessary conditions. Calling Sequence: subroutine tridcof(diff,tri,nlayer, tcu ,tcc,tcl) Data Declaration: real diff, tri, tcu , tcc...surfaceflux/(h(1)*bet), and -bottom layer needs +tri(nlayer,1)*diff(nlayer+1)*yo(nlayer+1))/bet Calling Sequence: subroutine tridmat( tcu ,tcc,tcl,nlayer,h

  14. A simplified description of the three-dimensional structure of agroforestry trees for use with a radiative transfer model

    International Nuclear Information System (INIS)

    Meloni, S.

    1998-01-01

    To simulate transmitted radiation in agroforestry systems, radiative transfer models usually require a detailed three-dimensional description of the tree canopy. We propose here a simplification of the description of the three-dimensional structure of wild cherry trees (Prunus avium). The simplified tree description was tested against the detailed one for five-year-old wild cherry. It allowed accurate simulation of transmitted radiation and avoided tedious measurements of tree structure. The simplified description was then applied to older trees. Allometric relationships were used to compute the parameters not available on free-grown trees. The transmitted radiation in an agroforestry system was simulated at four different ages: 5, 10, 15 and 20 years. The trees were planted on a 5 m square grid. Two row orientations, chosen to provide different transmitted radiation patterns, were tested: north/south and north- east/south-west. The simulations showed that the daily mean transmitted radiation was reduced from 92% of incident radiation under five-year-old trees to 37% under 20-year-old trees. The variability of transmitted radiation increased with tree growth. The row orientation had only small effects on the shaded area at the beginning and end of the day when solar elevation was low. (author)

  15. The MARINA model (Model to Assess River Inputs of Nutrients to seAs): Model description and results for China.

    Science.gov (United States)

    Strokal, Maryna; Kroeze, Carolien; Wang, Mengru; Bai, Zhaohai; Ma, Lin

    2016-08-15

    Chinese agriculture has been developing fast towards industrial food production systems that discharge nutrient-rich wastewater into rivers. As a result, nutrient export by rivers has been increasing, resulting in coastal water pollution. We developed a Model to Assess River Inputs of Nutrients to seAs (MARINA) for China. The MARINA Nutrient Model quantifies river export of nutrients by source at the sub-basin scale as a function of human activities on land. MARINA is a downscaled version for China of the Global NEWS-2 (Nutrient Export from WaterSheds) model with an improved approach for nutrient losses from animal production and population. We use the model to quantify dissolved inorganic and organic nitrogen (N) and phosphorus (P) export by six large rivers draining into the Bohai Gulf (Yellow, Hai, Liao), Yellow Sea (Yangtze, Huai) and South China Sea (Pearl) in 1970, 2000 and 2050. We addressed uncertainties in the MARINA Nutrient model. Between 1970 and 2000 river export of dissolved N and P increased by a factor of 2-8 depending on sea and nutrient form. Thus, the risk for coastal eutrophication increased. Direct losses of manure to rivers contribute to 60-78% of nutrient inputs to the Bohai Gulf and 20-74% of nutrient inputs to the other seas in 2000. Sewage is an important source of dissolved inorganic P, and synthetic fertilizers of dissolved inorganic N. Over half of the nutrients exported by the Yangtze and Pearl rivers originated from human activities in downstream and middlestream sub-basins. The Yellow River exported up to 70% of dissolved inorganic N and P from downstream sub-basins and of dissolved organic N and P from middlestream sub-basins. Rivers draining into the Bohai Gulf are drier, and thus transport fewer nutrients. For the future we calculate further increases in river export of nutrients. The MARINA Nutrient model quantifies the main sources of coastal water pollution for sub-basins. This information can contribute to formulation of

  16. Lecture Notes and Exercises for Course 21240 (Basic Analytical Chemistry)

    DEFF Research Database (Denmark)

    1999-01-01

    The publication contains notes dealing with difficult topics in analytical chemistry (cfr. Course Descriptions, DTU), relevant exercises as well as final examination problems from the last years.......The publication contains notes dealing with difficult topics in analytical chemistry (cfr. Course Descriptions, DTU), relevant exercises as well as final examination problems from the last years....

  17. Lecture Notes and Exercises for Course 21240 (Basic Analytical Chemistry)

    DEFF Research Database (Denmark)

    1998-01-01

    The publication contains notes dealing with difficult topics in analytical chemistry (cfr. Course Descriptions, DTU), relevant exercises as well as final examination problems from the last years.......The publication contains notes dealing with difficult topics in analytical chemistry (cfr. Course Descriptions, DTU), relevant exercises as well as final examination problems from the last years....

  18. A Markov chain description of the stepwise mutation model: local and global behaviour of the allele process.

    Science.gov (United States)

    Caliebe, Amke; Jochens, Arne; Krawczak, Michael; Rösler, Uwe

    2010-09-21

    The stepwise mutation model (SMM) is a simple, widely used model to describe the evolutionary behaviour of microsatellites. We apply a Markov chain description of the SMM and derive the marginal and joint properties of this process. In addition to the standard SMM, we also consider the normalised allele process. In contrast to the standard process, the normalised process converges to a stationary distribution. We show that the marginal stationary distribution is unimodal. The standard and normalised processes capture the global and the local behaviour of the SMM, respectively. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

  19. NOTES AND GLEANINGS / NOTE E CURIOSITÀ

    African Journals Online (AJOL)

    User

    Abstract: The aim of this note is to analyse Gadda's Giornale di campagna, first part of the Giornale di guerra e prigionia (War and imprisonment journal) looking for the founding elements of Gadda's political thought. The note investigates the. Giornale in order to explain Gadda's political opinions also in the framework of.

  20. Validation of a multi-phase plant-wide model for the description of the aeration process in a WWTP.

    Science.gov (United States)

    Lizarralde, I; Fernández-Arévalo, T; Beltrán, S; Ayesa, E; Grau, P

    2018-02-01

    This paper introduces a new mathematical model built under the PC-PWM methodology to describe the aeration process in a full-scale WWTP. This methodology enables a systematic and rigorous incorporation of chemical and physico-chemical transformations into biochemical process models, particularly for the description of liquid-gas transfer to describe the aeration process. The mathematical model constructed is able to reproduce biological COD and nitrogen removal, liquid-gas transfer and chemical reactions. The capability of the model to describe the liquid-gas mass transfer has been tested by comparing simulated and experimental results in a full-scale WWTP. Finally, an exploration by simulation has been undertaken to show the potential of the mathematical model. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Description and manual for the use of DRIVER - an interactive modelling aid

    CSIR Research Space (South Africa)

    Furniss, PR

    1977-09-01

    Full Text Available The modelling aid DRIVER is described. It permits the interactive manipulation of the parameters and variables of difference models which are implemented as FORTRAN subroutines. Relationships in the model can be expressed as arbitrary functions. A...

  2. The terrestrial ecosystems at Forsmark and Laxemar-Simpevarp. Site descriptive modelling SDM site

    International Nuclear Information System (INIS)

    Loefgren, Anders

    2008-12-01

    This report describes the terrestrial ecosystems in the Forsmark and Laxemar-Simpevarp areas by summarizing ecological data and data from disciplines such as hydrology, quaternary geology and chemistry. The description therefore includes a number of different processes that drive element fluxes in the ecosystems, such as net primary production, heterotrophic respiration, transpiration, and horizontal transport from land to streams and lakes. Moreover, the human appropriation of the landscape is described with regard to land use and potential and actual utilization of food resources both today and in a historical perspective

  3. The terrestrial ecosystems at Forsmark and Laxemar-Simpevarp. Site descriptive modelling SDM site

    Energy Technology Data Exchange (ETDEWEB)

    Loefgren, Anders (EcoAnalytica, Haegersten (Sweden)) (ed.)

    2008-12-15

    This report describes the terrestrial ecosystems in the Forsmark and Laxemar-Simpevarp areas by summarizing ecological data and data from disciplines such as hydrology, quaternary geology and chemistry. The description therefore includes a number of different processes that drive element fluxes in the ecosystems, such as net primary production, heterotrophic respiration, transpiration, and horizontal transport from land to streams and lakes. Moreover, the human appropriation of the landscape is described with regard to land use and potential and actual utilization of food resources both today and in a historical perspective

  4. The Joint UK Land Environment Simulator (JULES, model description – Part 2: Carbon fluxes and vegetation dynamics

    Directory of Open Access Journals (Sweden)

    D. B. Clark

    2011-09-01

    Full Text Available The Joint UK Land Environment Simulator (JULES is a process-based model that simulates the fluxes of carbon, water, energy and momentum between the land surface and the atmosphere. Many studies have demonstrated the important role of the land surface in the functioning of the Earth System. Different versions of JULES have been employed to quantify the effects on the land carbon sink of climate change, increasing atmospheric carbon dioxide concentrations, changing atmospheric aerosols and tropospheric ozone, and the response of methane emissions from wetlands to climate change.

    This paper describes the consolidation of these advances in the modelling of carbon fluxes and stores, in both the vegetation and soil, in version 2.2 of JULES. Features include a multi-layer canopy scheme for light interception, including a sunfleck penetration scheme, a coupled scheme of leaf photosynthesis and stomatal conductance, representation of the effects of ozone on leaf physiology, and a description of methane emissions from wetlands. JULES represents the carbon allocation, growth and population dynamics of five plant functional types. The turnover of carbon from living plant tissues is fed into a 4-pool soil carbon model.

    The process-based descriptions of key ecological processes and trace gas fluxes in JULES mean that this community model is well-suited for use in carbon cycle, climate change and impacts studies, either in standalone mode or as the land component of a coupled Earth system model.

  5. Variable-density groundwater flow simulations and particle tracking. Numerical modelling using DarcyTools. Preliminary site description of the Simpevarp area, version 1.1

    Energy Technology Data Exchange (ETDEWEB)

    Follin, Sven [SF GeoLogic AB, Stockholm (Sweden); Stigsson, Martin; Berglund, Sten [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Svensson, Urban [Computer-aided Fluid Engineering AB, Norrkoeping (Sweden)

    2004-12-01

    SKB is conducting site investigations for a high-level nuclear waste repository in fractured crystalline rocks at two coastal areas in Sweden, Forsmark and Simpevarp. The investigations started in 2002 and have been planned since the late 1990s. The work presented here investigates the possibility of using hydrogeochemical measurements in deep boreholes to reduce parameter uncertainty in a regional modelling of groundwater flow in fractured rock. The work was conducted with the aim of improving the palaeohydrogeological understanding of the Simpevarp area and to give recommendations to the preparations of the next version of the Preliminary Site Description (1.2). The study is based on a large number of numerical simulations of transient variable density groundwater flow through a strongly heterogeneous and anisotropic medium. The simulations were conducted with the computer code DarcyTools, the development of which has been funded by SKB. DarcyTools is a flexible porous media code specifically designed to treat groundwater flow and salt transport in sparsely fractured crystalline rock and it is noted that some of the features presented in this report are still under development or subjected to testing and verification. The simulations reveal the sensitivity of the results to different hydrogeological modelling assumptions, e.g. the sensitivity to the initial groundwater conditions at 10,000 BC, the size of the model domain and boundary conditions, and the hydraulic properties of deterministically and stochastically modelled deformation zones. The outcome of these simulations was compared with measured salinities and calculated relative proportions of different water types (mixing proportions) from measurements in two deep core drilled boreholes in the Laxemar subarea. In addition to the flow simulations, the statistics of flow related transport parameters were calculated for particle flowpaths from repository depth to ground surface for two subareas within the

  6. A core competency model for Chinese baccalaureate nursing graduates: a descriptive correlational study in Beijing.

    Science.gov (United States)

    Yang, Fang Yu; Zhao, Rong Rong; Liu, Yi Si; Wu, Ying; Jin, Ning Ning; Li, Rui Ying; Shi, Shu Ping; Shao, Yue Ying; Guo, Ming; Arthur, David; Elliott, Malcolm

    2013-12-01

    A review of the literature showed that the core competencies needed by newly graduated Chinese nurses were not as of yet undocumented. To develop a psychometrically sound instrument for identifying and measuring the core competencies needed by Chinese nursing baccalaureate graduates. Descriptive correlational and multicentre study. Seven major tertiary teaching hospitals and three major medical universities in Beijing. 790 subjects, including patients, nursing faculty members, doctors and nurses. A reliable and valid self-report instrument, consisting of 58 items, was developed using multiple methods. It was then distributed to 790 subjects to measure nursing competency in a broader Chinese context. The psychometric characteristics of reliability and validity were supported by descriptive and inferential analyses. The final instrument consists of six dimensions with 47 items. The content validity index was 0.90. The overall scale reliability was 0.97 with dimensions range from 0.87 to 0.94. Six domains of core competencies were identified: professionalism; direct care; support and communication; application of professional knowledge; personal traits; and critical thinking and innovation. The findings of this study provide valuable evidence for a psychometrically sound measurement tool, as well as for competency-based nursing curriculum reform. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. Ligand and Charge Distribution (LCD) model for the description of fulvic acid adsorption to goethite

    NARCIS (Netherlands)

    Weng, L.P.; Riemsdijk, van W.H.; Koopal, L.K.; Hiemstra, T.

    2006-01-01

    The LCD model (Ligand and Charge Distribution) has recently been proposed to describe the adsorption of humic substances to oxides, in which the CD-MUSIC model and the NICA model for ion binding to respectively oxides and humic substances are integrated. In this paper, the LCD model is improved by

  8. Statistical model of fractures and deformation zones. Preliminary site description, Laxemar subarea, version 1.2

    Energy Technology Data Exchange (ETDEWEB)

    Hermanson, Jan; Forssberg, Ola [Golder Associates AB, Stockholm (Sweden); Fox, Aaron; La Pointe, Paul [Golder Associates Inc., Redmond, WA (United States)

    2005-10-15

    The goal of this summary report is to document the data sources, software tools, experimental methods, assumptions, and model parameters in the discrete-fracture network (DFN) model for the local model volume in Laxemar, version 1.2. The model parameters presented herein are intended for use by other project modeling teams. Individual modeling teams may elect to simplify or use only a portion of the DFN model, depending on their needs. This model is not intended to be a flow model or a mechanical model; as such, only the geometrical characterization is presented. The derivations of the hydraulic or mechanical properties of the fractures or their subsurface connectivities are not within the scope of this report. This model represents analyses carried out on particular data sets. If additional data are obtained, or values for existing data are changed or excluded, the conclusions reached in this report, and the parameter values calculated, may change as well. The model volume is divided into two subareas; one located on the Simpevarp peninsula adjacent to the power plant (Simpevarp), and one further to the west (Laxemar). The DFN parameters described in this report were determined by analysis of data collected within the local model volume. As such, the final DFN model is only valid within this local model volume and the modeling subareas (Laxemar and Simpevarp) within.

  9. High Temperature Test Facility Preliminary RELAP5-3D Input Model Description

    Energy Technology Data Exchange (ETDEWEB)

    Bayless, Paul David [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2015-12-01

    A RELAP5-3D input model is being developed for the High Temperature Test Facility at Oregon State University. The current model is described in detail. Further refinements will be made to the model as final as-built drawings are released and when system characterization data are available for benchmarking the input model.

  10. Statistical description of tropospheric delay for InSAR : Overview and a new model

    DEFF Research Database (Denmark)

    Merryman Boncori, John Peter; Mohr, Johan Jacob

    2007-01-01

    This paper focuses on statistical modeling of water vapor fluctuations for InSAR. The structure function and power spectral density approaches are reviewed, summarizing their assumptions and results. The linking equations between these modeling techniques are reported. A structure function model ...... of these, to atmospheric statistics. The latter approach is used to compare the derived model with previously published results....

  11. A functorial model theory newer applications to algebraic topology, descriptive sets, and computing categories topos

    CERN Document Server

    Nourani, Cyrus F

    2014-01-01

    IntroductionCategorical PreliminariesCategories and FunctorsMorphismsFunctorsCategorical ProductsNatural TransformationsProducts on Models Preservation of LimitsModel Theory and Topoi More on Universal ConstructionsChapter ExercisesInfinite Language CategoriesBasicsLimits and Infinitary Languages Generic Functors and Language String ModelsFunctorial Morphic Ordered Structure ModelsChapter ExercisesFunctorial Morphic Ordered Structure ModelsFunctorial Fragment M

  12. Updated strategy and test of new concepts for groundwater flow modelling in Forsmark in preparation of site descriptive modelling stage 2.2

    International Nuclear Information System (INIS)

    Follin, Sven; Johansson, Per-Olof; Leven, Jakob; Hartley, Lee; Holton, David; McCarthy, Rachel; Roberts, David

    2007-01-01

    As part of the preliminary Site Descriptive Modelling (SDM version 1.2) for the Initial Site Investigation (ISI) stage at Forsmark, Simpevarp and Laxemar, a methodology was developed for constructing hydrogeological models of the crystalline bedrock. The methodology achieved reasonable success given the restricted amounts and types of data available at the time. Notwithstanding, several issues of concern have surfaced following the reviews of the preliminary site descriptions of the three sites. Possible solutions to parts of the problems have been discussed internally for a longer time and an integrated view and strategy forward has been formulated. The 'new strategy' is not a complete shift in methodology, however, but a refocusing on and clarification of the key aspects that the hydrogeological SDM needs to accomplish. In broad terms the basic principle of the 'new strategy' suggested is to develop an overall conceptual model that first establishes the major flowing deformation zones, and then gradually approaches determination of the hydraulic properties of the bedrock outside these zones in the potential repository volume. On each scale, the focus of the description should be on features/structures of significance on that scale. Clearly, a detailed (although statistical) description of the repository and canister deposition hole scale is the end goal, but this approach (which also is more the traditional approach in hydrogeology) is judged to provide a much better motivated overall geometrical description. Furthermore, the 'new strategy' puts more emphasis on field testing (e.g. interference tests) and data analyses and less on numerical simulation and calibration. That is, before extensive (and costly) simulations and model calibrations are made it needs to be clearly understood what could be the potential gains of carrying them out. This report presents the conceptual model development for Forsmark in preparation of the site descriptive modelling in stage 2

  13. Updated strategy and test of new concepts for groundwater flow modelling in Forsmark in preparation of site descriptive modelling stage 2.2

    Energy Technology Data Exchange (ETDEWEB)

    Follin, Sven [SF GeoLogic AB (Sweden); Johansson, Per-Olof [Artesia Grundvattenkonsult AB (Sweden); Leven, Jakob [Geosigma AB (Sweden); Hartley, Lee; Holton, David; McCarthy, Rachel; Roberts, David [Serco Assurance (United Kingdom)

    2007-01-15

    As part of the preliminary Site Descriptive Modelling (SDM version 1.2) for the Initial Site Investigation (ISI) stage at Forsmark, Simpevarp and Laxemar, a methodology was developed for constructing hydrogeological models of the crystalline bedrock. The methodology achieved reasonable success given the restricted amounts and types of data available at the time. Notwithstanding, several issues of concern have surfaced following the reviews of the preliminary site descriptions of the three sites. Possible solutions to parts of the problems have been discussed internally for a longer time and an integrated view and strategy forward has been formulated. The 'new strategy' is not a complete shift in methodology, however, but a refocusing on and clarification of the key aspects that the hydrogeological SDM needs to accomplish. In broad terms the basic principle of the 'new strategy' suggested is to develop an overall conceptual model that first establishes the major flowing deformation zones, and then gradually approaches determination of the hydraulic properties of the bedrock outside these zones in the potential repository volume. On each scale, the focus of the description should be on features/structures of significance on that scale. Clearly, a detailed (although statistical) description of the repository and canister deposition hole scale is the end goal, but this approach (which also is more the traditional approach in hydrogeology) is judged to provide a much better motivated overall geometrical description. Furthermore, the 'new strategy' puts more emphasis on field testing (e.g. interference tests) and data analyses and less on numerical simulation and calibration. That is, before extensive (and costly) simulations and model calibrations are made it needs to be clearly understood what could be the potential gains of carrying them out. This report presents the conceptual model development for Forsmark in preparation of the site

  14. A Method for Cyber-Physical System Behavior Modeling and Safety Verification Based on Extended Hybrid System Description Language

    Directory of Open Access Journals (Sweden)

    Tuo Ming Fu

    2016-01-01

    Full Text Available The safety of Cyber-physical system(CPS is up to its behavior, and it is a key property for CPS to be applied in critical application fields. A method for CPS behavior modeling and safety verification is put forward in this paper. The behavior model of CPS is described by extended hybrid system description language(EHYSDEL. The formal definition of hybrid program(HP is given, and the behavior model is transformed to HP based on the definition. The safety of CPS is verified by inputting the HP to KeYmarea. The advantage of the approach is that it models CPS intuitively and verify it’s safety strictly avoiding the state space explosion

  15. A new simplifying approach to molecular geometry description: the vectorial bond-valence model.

    Science.gov (United States)

    Harvey, Miguel Angel; Baggio, Sergio; Baggio, Ricardo

    2006-12-01

    A method to describe, analyze and even predict the coordination geometries of metal complexes is proposed, based on previous well established concepts such as bond valence and valence-shell electron-pair repulsion (VSEPR). The idea behind the method is the generalization of the scalar bond-valence concept into a vector quantity, the bond-valence vector (BVV), with the innovation that the multidentate ligands are represented by their resultant BVVs. Complex n-ligand coordination spheres (frequently indescribable at the atomic level) reduce to much simpler ones when analyzed in BVV space, with the bonus of a better applicability of the VSEPR predictions. The geometrical implications of the BVV description are analyzed for the cases of n=2 and 3 (n=number of ligands), and the validity of its predictions, checked for a large number of metal complexes.

  16. Ocean-atmosphere coupled climate model development at SAWS: description and diagnosis

    CSIR Research Space (South Africa)

    Beraki, A

    2011-09-01

    Full Text Available This paper introduces the South African Weather Service's coupled ocean-atmosphere model. The paper also demonstrates the advances made in configuring an operational coupled ocean-atmosphere model in South Africa for seasonal forecast production...

  17. Advanced communication system time domain modeling techniques ASYSTD software description. Volume 2: Program support documentation

    Science.gov (United States)

    1972-01-01

    The theoretical basis for the ASYSTD program is discussed in detail. In addition, the extensive bibliography given in this document illustrates some of the extensive work accomplished in the area of time domain simulation. Additions have been in the areas of modeling and language program enhancements, orthogonal transform modeling, error analysis, general filter models, BER measurements, etc. Several models have been developed which utilize the COMSAT generated orthogonal transform algorithms.

  18. APPLICATION OF RANKING BASED ATTRIBUTE SELECTION FILTERS TO PERFORM AUTOMATED EVALUATION OF DESCRIPTIVE ANSWERS THROUGH SEQUENTIAL MINIMAL OPTIMIZATION MODELS

    Directory of Open Access Journals (Sweden)

    C. Sunil Kumar

    2014-10-01

    Full Text Available In this paper, we study the performance of various models for automated evaluation of descriptive answers by using rank based feature selection filters for dimensionality reduction. We quantitatively analyze the best feature selection technique from amongst the five rank based feature selection techniques, namely Chi squared filter, Information gain filter, Gain ratio filter, Relief filter and Symmetrical uncertainty filter. We use Sequential Minimal Optimization with Polynomial kernel to build models and we evaluate the models across various parameters such as Accuracy, Time to build models, Kappa, Mean Absolute Error and Root Mean Squared Error. Except with Relief filter, for all other filters applied models, the accuracies obtained are at least 4% better than accuracies obtained with models with no filters applied. The accuracies recorded are same across Chi squared filter, Information gain filter, Gain ratio filter and Symmetrical Uncertainty filter. Therefore accuracy alone is not the determinant in selecting the best filter. The time taken to build models, Kappa, Mean absolute error and Root Mean Squared Error played a major role in determining the effectiveness of the filters. The overall rank aggregation metric of Symmetrical uncertainty filter is 45 and this is better by 1 rank than the rank aggregation metric of information gain attribute evaluation filter, the nearest contender to Symmetric attribute evaluation filter. Symmetric uncertainty rank aggregation metric is better by 3, 6, 112 ranks respectively when compared to rank aggregation metrics of Chi squared filter, Gain ratio filter and Relief filters. Through these quantitative measurements, we conclude that Symmetrical uncertainty attribute evaluation is the overall best performing rank based feature selection algorithm applicable for auto evaluation of descriptive answers.

  19. Descriptive modelling to predict deoxynivalenol in winter wheat in the Netherlands.

    Science.gov (United States)

    Van Der Fels-Klerx, H J; Burgers, S L G E; Booij, C J H

    2010-05-01

    Predictions of deoxynivalenol (DON) content in wheat at harvest can be useful for decision-making by stakeholders of the wheat feed and food supply chain. The objective of the current research was to develop quantitative predictive models for DON in mature winter wheat in the Netherlands for two specific groups of end-users. One model was developed for use by farmers in underpinning Fusarium spp. disease management, specifically the application of fungicides around wheat flowering (model A). The second model was developed for industry and food safety authorities, and considered the entire wheat cultivation period (model B). Model development was based on observational data collected from 425 fields throughout the Netherlands between 2001 and 2008. For each field, agronomical information, climatic data and DON levels in mature wheat were collected. Using multiple regression analyses, the set of biological relevant variables that provided the highest statistical performance was selected. The two final models include the following variables: region, wheat resistance level, spraying, flowering date, several climatic variables in the different stages of wheat growing, and length of the period between flowering and harvesting (model B only). The percentages of variance accounted for were 64.4% and 65.6% for models A and B, respectively. Model validation showed high correlation between the predicted and observed DON levels. The two models may be applied by various groups of end-users to reduce DON contamination in wheat-derived feed and food products and, ultimately, reduce animal and consumer health risks.

  20. Generic Hubbard model description of semiconductor quantum-dot spin qubits

    Science.gov (United States)

    Yang, Shuo; Wang, Xin; Das Sarma, S.

    2011-04-01

    We introduce a Hubbard model as the simple quantum generalization of the classical capacitance circuit model to study semiconductor quantum-dot spin qubits. We prove theoretically that our model is equivalent to the usual capacitance circuit model in the absence of quantum fluctuations. However, our model naturally includes quantum effects such as hopping and spin exchange. The parameters of the generalized Hubbard model can either be directly read off from the experimental plot of the stability diagram or be calculated from the microscopic theory, establishing a quantitative connection between the two. We show that, while the main topology of the charge stability diagram is determined by the ratio between intersite and on-site Coulomb repulsion, fine details of the stability diagram reveal information about quantum effects. Extracting quantum information from experiments using our Hubbard model approach is simple, but would require the measurement resolution to increase by an order of magnitude.

  1. A Note on the Computation of the Second-Order Derivatives of the Elementary Symmetric Functions in the Rasch Model.

    Science.gov (United States)

    Formann, Anton K.

    1986-01-01

    It is shown that for equal parameters explicit formulas exist, facilitating the application of the Newton-Raphson procedure to estimate the parameters in the Rasch model and related models according to the conditional maximum likelihood principle. (Author/LMO)

  2. Some notes on taxonomic methodology

    NARCIS (Netherlands)

    Hammen, van der L.

    1986-01-01

    The present paper constitutes an introduction to taxonomic methodology. After an analysis of taxonomic practice, and a brief survey of kinds of attributes, the paper deals with observation, description, comparison, arrangement and classification, hypothesis construction, deduction, model,

  3. Description of the University of Auckland Global Mars Mesoscale Meteorological Model (GM4)

    Science.gov (United States)

    Wing, D. R.; Austin, G. L.

    2005-08-01

    The University of Auckland Global Mars Mesoscale Meteorological Model (GM4) is a numerical weather prediction model of the Martian atmosphere that has been developed through the conversion of the Penn State University / National Center for Atmospheric Research fifth generation mesoscale model (MM5). The global aspect of this model is self consistent, overlapping, and forms a continuous domain around the entire planet, removing the need to provide boundary conditions other than at initialisation, yielding independence from the constraint of a Mars general circulation model. The brief overview of the model will be given, outlining the key physical processes and setup of the model. Comparison between data collected from Mars Pathfinder during its 1997 mission and simulated conditions using GM4 have been performed. Diurnal temperature variation as predicted by the model shows very good correspondence with the surface truth data, to within 5 K for the majority of the diurnal cycle. Mars Viking Data is also compared with the model, with good agreement. As a further means of validation for the model, various seasonal comparisons of surface and vertical atmospheric structure are conducted with the European Space Agency AOPP/LMD Mars Climate Database. Selected simulations over regions of interest will also be presented.

  4. Short description of the BIOS-model, and selection of biosphere parameters to be used in radionuclide transport and dose

    International Nuclear Information System (INIS)

    Jong, E.J. de; Koester, H.W.; Vries, W.J. de.

    1990-02-01

    In the framework of the PACOMA-project (Performance assessment of confinements for medium and alpha waste), initiated by the European Commission, possible future radiation doses, due to contamination of the biosphere by radionuclides originating from radioactive waste disposed in salt-formations, were calculated. In all cases considered radionuclides coming out of the geosphere enter a river. For the biosphere calculations the BIOS-model, developed by the NRPB in England, is used. A short description of the model, as well as of the adjustments made at the RIVM to calculate the total individual and collective doses and the subdoses of different exposure pathways is given. The values of biosphere parameters selected for the model are presented, together with the literature consulted. (author). 17 refs., 3 figs.; 2 tabs

  5. A study of the Pythia 8 description of ATLAS minimum bias measurements with the Donnachie-Landshoff diffractive model

    CERN Document Server

    The ATLAS collaboration

    2016-01-01

    We present a new tune of the Pythia8 event generator, titled ``A3'' and suitable for inclusive QCD modelling, including minimum bias physics and pile-up overlay. The tuning uses the early Run~2 charged particle distribution and inelastic cross section results from ATLAS in addition to the Run~1 data used to construct previous minimum-bias tunes. For the first time, the tuning included a consideration of diffraction modelling parameters and a diffractive model other than the Pythia8 default is used in the final configuration. That resulted in a better descriptions of the measured inelastic cross-sections, and similar or better level of agreement compared to the currently used A2 tune for other distributions considered.

  6. The Joint UK Land Environment Simulator (JULES, model description – Part 1: Energy and water fluxes

    Directory of Open Access Journals (Sweden)

    M. J. Best

    2011-09-01

    Full Text Available This manuscript describes the energy and water components of a new community land surface model called the Joint UK Land Environment Simulator (JULES. This is developed from the Met Office Surface Exchange Scheme (MOSES. It can be used as a stand alone land surface model driven by observed forcing data, or coupled to an atmospheric global circulation model. The JULES model has been coupled to the Met Office Unified Model (UM and as such provides a unique opportunity for the research community to contribute their research to improve both world-leading operational weather forecasting and climate change prediction systems. In addition JULES, and its forerunner MOSES, have been the basis for a number of very high-profile papers concerning the land-surface and climate over the last decade. JULES has a modular structure aligned to physical processes, providing the basis for a flexible modelling platform.

  7. RegCM4: model description and preliminary tests over multiple CORDEX domains F

    OpenAIRE

    Giorgi, Filippo et al; Coppola, E.; Solmon, F.; Mariotti, L.; Sylla, M. B.; Bi, X.; Elguindi, N.; Diro, G. T.; Nair, V.; Giuliani, G.; Turuncoglu, U. U.; Cozzini, S.; Güttler, I.; O’Brien, T. A.; Tawfik, A. B.

    2012-01-01

    A new version of the RegCM regional climate modeling system, RegCM4, has been recently developed and made available for public use. Compared to previous versions, RegCM4 includes new land surface, planetary boundary layer, and air–sea flux schemes, a mixed convection and tropical band configuration, modifications to the pre-existing radiative transfer and boundary layer schemes, and a full upgrade of the model code towards improved flexibility, portability, and user friendliness. The model...

  8. Development, description and validation of a Tritium Environmental Release Model (TERM).

    Science.gov (United States)

    Jeffers, Rebecca S; Parker, Geoffrey T

    2014-01-01

    Tritium is a radioisotope of hydrogen that exists naturally in the environment and may also be released through anthropogenic activities. It bonds readily with hydrogen and oxygen atoms to form tritiated water, which then cycles through the hydrosphere. This paper seeks to model the migration of tritiated species throughout the environment - including atmospheric, river and coastal systems - more comprehensively and more consistently across release scenarios than is currently in the literature. A review of the features and underlying conceptual models of some existing tritium release models was conducted, and an underlying aggregated conceptual process model defined, which is presented. The new model, dubbed 'Tritium Environmental Release Model' (TERM), was then tested against multiple validation sets from literature, including experimental data and reference tests for tritium models. TERM has been shown to be capable of providing reasonable results which are broadly comparable with atmospheric HTO release models from the literature, spanning both continuous and discrete release conditions. TERM also performed well when compared with atmospheric data. TERM is believed to be a useful tool for examining discrete and continuous atmospheric releases or combinations thereof. TERM also includes further capabilities (e.g. river and coastal release scenarios) that may be applicable to certain scenarios that atmospheric models alone may not handle well. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. Grouping Notes Through Nodes

    DEFF Research Database (Denmark)

    Dove, Graham; Abildgaard, Sille Julie; Biskjær, Michael Mose

    2017-01-01

    The Post-ItTM note is a frequently used, and yet seldom studied, design material. We investigate the functions Post-ItTM notes serve when providing cognitive support for creative design team practice. Our investigation considers the ways in which Post-ItTM notes function as design externalisation...

  10. NOTES in Europe

    DEFF Research Database (Denmark)

    Meining, A; Spaun, G; Fernández-Esparrach, G

    2013-01-01

    transluminal endoscopic surgery (NOTES) in Europe. In accordance with previous meetings, five working groups were formed. In 2012, emphasis was put on specific indications for NOTES and interventional endoscopy. Each group was assigned an important indication related to ongoing research in NOTES...

  11. A taxonomic review of the anilline genus Zeanillus Jeannel (Coleoptera: Carabidae: Bembidiini) of New Zealand, with descriptions of seven new species, re-classification of the species, and notes on their biogeography and evolution.

    Science.gov (United States)

    Sokolov, Igor M

    2016-11-20

    Based upon external features of adults of the genus Zeanillus ten species are recognized, seven of which are new to science. Because of significant morphological differences, all species are arranged in four subgenera: the nominotypical subgenus Zeanillus, including Z. phyllobius (Broun), Z. punctigerus (Broun), and Z. nunni, new species (New Zealand, South Island, Otago, Trotters George); the monobasic subgenus Brounanillus, new subgenus, including Z. pallidus (Broun); the monobasic subgenus Nunnanillus, new subgenus, including Z. pellucidus, new species (New Zealand, South Island, Otago, Oamaru); and the most species-rich subgenus Otagonillus, new subgenus, including Z. brouni, new species (New Zealand, South Island, Otago, Oamaru), Z. lescheni, new species (New Zealand, South Island, Southland, Waikaia Forest), Z. carltoni, new species (New Zealand, South Island, Otago, Mount Watkin), Z. montivagus, new species (New Zealand, South Island, Otago, North Rough Ridge), and Z. nanus, new species (New Zealand, South Island, Otago, Waipori River Valley). Based on new morphological data, a redescription of genus, redescriptions of previously described species, and descriptions of all new taxa are given and a taxonomic key for all known species is provided. Maps of species distributions and illustrations of main taxonomic characters used in the text are also included. Some biogeographic/evolutionary aspects of Zeanillus origin and diversification are discussed.

  12. From continuum analytical description to discrete numerical modelling of localized fluidization in granular media

    Directory of Open Access Journals (Sweden)

    Puig i Montellà Eduard

    2017-01-01

    Full Text Available We present analytical and numerical results on localized fluidization within a granular layer subjected to a local injection of fluid. As the injection rate increases the three different regimes previously reported in the literature are recovered: homogeneous expansion of the bed, fluidized cavity in which fluidization starts developing above the injection area, and finally the chimney of fluidized grains when the fluidization zone reaches the free surface. The analytical approach is at the continuum scale, based on Darcy’s law and Therzaghi’s effective stress principle. It provides a good description of the phenomenon as long as the porosity of the granular assembly remains relatively homogeneous. The numerical approach is at the particle scale based on the coupled DEM-PFV method. It tackles the more heterogeneous situations which occur at larger injection rates. A direct link is evidenced between the occurrence of the different regimes of fluidization and the injection aperture. Finally, the merging of chimneys in case of two injection points is investigated.

  13. Better Water Demand and Pipe Description Improve the Distribution Network Modeling Results

    Science.gov (United States)

    Distribution system modeling simplifies pipe network in skeletonization and simulates the flow and water quality by using generalized water demand patterns. While widely used, the approach has not been examined fully on how it impacts the modeling fidelity. This study intends to ...

  14. Description and Rationale for the Planning, Monitoring, and Implementation (PMI) Model: Rationale.

    Science.gov (United States)

    Cort, H. Russell

    The rationale for the Planning, Monitoring, and Implementation Model (PMI) is the subject of this paper. The Superintendent of the District of Columbia Public Schools requested a model for systematic evaluation of educational programs to determine their effectiveness. The school system's emphasis on objective-referenced instruction and testing,…

  15. A domain-independent descriptive design model and its application to structured reflection on design processes

    NARCIS (Netherlands)

    Reymen, Isabelle; Hammer, D.K.; Kroes, P.A.; van Aken, Joan Ernst; van Aken, J.E.; Dorst, C.H.; Bax, M.F.T.; Basten, T

    2006-01-01

    Domain-independent models of the design process are an important means for facilitating interdisciplinary communication and for supporting multidisciplinary design. Many so-called domain-independent models are, however, not really domain independent. We state that to be domain independent, the

  16. Introduction to Multilevel Item Response Theory Analysis: Descriptive and Explanatory Models

    Science.gov (United States)

    Sulis, Isabella; Toland, Michael D.

    2017-01-01

    Item response theory (IRT) models are the main psychometric approach for the development, evaluation, and refinement of multi-item instruments and scaling of latent traits, whereas multilevel models are the primary statistical method when considering the dependence between person responses when primary units (e.g., students) are nested within…

  17. Model description for calculating the source term of the Angra 1 environmental control system

    International Nuclear Information System (INIS)

    Oliveira, L.F.S. de; Amaral Neto, J.D.; Salles, M.R.

    1988-01-01

    This work presents the model used for evaluation of source term released from Angra 1 Nuclear Power Plant in case of an accident. After that, an application of the model for the case of a Fuel Assembly Drop Accident Inside the Fuel Handling Building during reactor refueling is presented. (author) [pt

  18. Group Coaching on Pre-School Teachers' Implementation of Pyramid Model Strategies: A Program Description

    Science.gov (United States)

    Fettig, Angel; Artman-Meeker, Kathleen

    2016-01-01

    The purpose of this article was to describe a group coaching model and present preliminary evidence of its impact on teachers' implementation of Pyramid Model practices. In particular, we described coaching strategies used to support teachers in reflecting and problem solving on the implementation of the evidence-based strategies. Preliminary…

  19. Description and application of the combined surface and groundwater flow model MOGROW

    NARCIS (Netherlands)

    Querner, E.P.

    1997-01-01

    In the Netherlands shallow groundwater tables prevail in many parts, such that groundwater and surface water are closely interlinked. Thus the use of a combined groundwater and surface water model is necessary to predict the effect of certain measures on a regional scale. Therefore the model MOGROW

  20. Descriptive Research

    DEFF Research Database (Denmark)

    Wigram, Anthony Lewis

    2003-01-01

    Descriptive research is described by Lathom-Radocy and Radocy (1995) to include Survey research, ex post facto research, case studies and developmental studies. Descriptive research also includes a review of the literature in order to provide both quantitative and qualitative evidence of the effect...... starts will allow effect size calculations to be made in order to evaluate effect over time. Given the difficulties in undertaking controlled experimental studies in the creative arts therapies, descriptive research methods offer a way of quantifying effect through descriptive statistical analysis...