Modeling impact of environmental factors on photovoltaic array performance

Energy Technology Data Exchange (ETDEWEB)

Yang, Jie; Sun, Yize; Xu, Yang [College of Mechanical Engineering, Donghua University NO.2999, North Renmin Road, Shanghai (China)

2013-07-01

It is represented in this paper that a methodology to model and quantify the impact of the three environmental factors, the ambient temperature, the incident irradiance and the wind speed, upon the performance of photovoltaic array operating under outdoor conditions. First, A simple correlation correlating operating temperature with the three environmental variables is validated for a range of wind speed studied, 2-8, and for irradiance values between 200 and 1000. Root mean square error (RMSE) between modeled operating temperature and measured values is 1.19% and the mean bias error (MBE) is -0.09%. The environmental factors studied influence I-V curves, P-V curves, and maximum-power outputs of photovoltaic array. The cell-to-module-to-array mathematical model for photovoltaic panels is established in this paper and the method defined as segmented iteration is adopted to solve the I-V curve expression to relate model I-V curves. The model I-V curves and P-V curves are concluded to coincide well with measured data points. The RMSE between numerically calculated maximum-power outputs and experimentally measured ones is 0.2307%, while the MBE is 0.0183%. In addition, a multivariable non-linear regression equation is proposed to eliminate the difference between numerically calculated values and measured ones of maximum power outputs over the range of high ambient temperature and irradiance at noon and in the early afternoon. In conclusion, the proposed method is reasonably simple and accurate.

Search for a Vectorlike Quark with Charge 2/3 in <i>t> + Z Events from <i>pp> Collisions at \\(\\sqrt{s} = 7\\) TeV

Energy Technology Data Exchange (ETDEWEB)

Chatrchyan, Serguei

2011-12-01

A search for pair-produced heavy vector-like charge-2/3 quarks, T, in <i>pp> collisions at a center-of-mass energy of 7 TeV, is performed with the CMS detector at the LHC. Events consistent with the flavor-changing-neutral-current decay of a T quark to a top quark and a Z boson are selected by requiring two leptons from the Z-boson decay, as well as an additional isolated charged lepton. In a data sample corresponding to an integrated luminosity of 1.14 fb^-1 inverse femtobarns, the number of observed events is found to be consistent with the standard model background prediction. Assuming a branching fraction of 100% for the decay T → tZ, a T quark with a mass less than 475 GeV/c² is excluded at the 95% confidence level.

Total System Performance Assessment: Enhanced Design Alternative V

International Nuclear Information System (INIS)

N. Erb; S. Miller; V. Vallikat

1999-01-01

This calculation documents the total system performance assessment modeling of Enhanced Design Analysis (EDA) V. EDA V is based on the TSPA-VA base design which has been modified with higher thermal loading, a quartz sand invert, and line loading with 21 PWR waste packages that have 2-cm thick titanium grade 7 corrosion resistance material (CRM) drip shields placed over dual-layer waste packages composed of 'inside out' VA reference material (CRWMS M and O 1999a). This document details the changes and assumptions made to the VA reference Performance Assessment Model (CRWMS M and O 1998a) to incorporate the design changes detailed for EDA V. The performance measure for this evaluation is expected value dose-rate history. Time histories of dose rate are presented for EDA V and a Defense in Depth (DID) analysis base on EDA V. Additional details concerning the Enhanced Design Alternative II are provided in the 'LADS 3-12 Requests' interoffice correspondence (CRWMS M and O 1999a)

Initial performance studies of a general-purpose detector for multi-TeV physics at a 100 TeV <i>pp> collider

Energy Technology Data Exchange (ETDEWEB)

Chekanov, S. V.; Beydler, M.; Kotwal, A. V.; Gray, L.; Sen, S.; Tran, N. V.; Yu, S. -S.; Zuzelski, J.

2017-06-01

This paper describes simulations of detector response to multi-TeV physics at the Future Circular Collider (FCC-hh) or Super proton-proton Collider (SppC) which aim to collide proton beams with a centre-of-mass energy of 100 TeV. The unprecedented energy regime of these future experiments imposes new requirements on detector technologies which can be studied using the detailed GEANT4 simulations presented in this paper. The initial performance of a detector designed for physics studies at the FCC-hh or SppC experiments is described with an emphasis on measurements of single particles up to 33 TeV in transverse momentum. The reconstruction of hadronic jets has also been studied in the transverse momentum range from 50 GeV to 26 TeV. The granularity requirements for calorimetry are investigated using the two-particle spatial resolution achieved for hadron showers.

On the I-V characteristic in the non-linear tenary mixture model for polycrystalline semiconductors

International Nuclear Information System (INIS)

Nguyen Van Lien; Nguyen Hoai Nam

2000-08-01

A simple expression for the voltage dependence of grain-boundary potential barrier heights is proposed and the Effective Medium Approximation is extended for calculating the I-V characteristic in tenary mixtures of highly non-linear circuit elements. Numerical calculations are performed for the case of polycrystalline semiconductors, such as ZnO-based varistors, where the thermoionic emission is believed to be the dominant mechanism for the electric conduction across double Schottky barriers at room temperature. (author)

The short-circuit test results of 6.9 kV/2.3 kV 400 kVA-class YBCO model transformer

International Nuclear Information System (INIS)

Tomioka, A.; Otonari, T.; Ogata, T.; Iwakuma, M.; Okamoto, H.; Hayashi, H.; Iijima, Y.; Saito, T.; Gosho, Y.; Tanabe, K.; Izumi, T.; Shiohara, Y.

2011-01-01

The 6.9 kV/2.3 kV 400 kVA-class single-phase YBCO model transformer with the YBCO tape with copper tape was manufactured for short-circuit current test. Short-circuit test was performed and the short-circuit current of primary winding was 346 A which was about six times larger than the rated current. The I-V characteristics of the winding did not change before and after the test. The transformer withstood short-circuit current. We are planning to turn the result into a consideration of a 66 kV/6.9 kV-20 MVA-class three-phase superconducting transformer. We are developing an elemental technology for 66 kV/6.9 kV 20 MVA-class power transformer with YBCO conductors. The protection of short-circuit technology is one of the elemental technologies for HTS transformer. Since short-circuit current is much higher than critical current of YBCO tape, there is a possibility that superconducting characteristics may be damaged during short-circuit period. We made a conductor to compose the YBCO tape with copper tape. We manufactured 6.9 kV/2.3 kV 400 kVA-class YBCO model transformer using this conductor and performed short-circuit current test. The short-circuit current of primary winding was 346 A which was about six times larger than the rated current. The I-V characteristics of the winding did not change before and after the test. We may consider this conductor withstands short-circuit current.

Titan I propulsion system modeling and possible performance improvements

Science.gov (United States)

Giusti, Oreste

This thesis features the Titan I propulsion systems and offers data-supported suggestions for improvements to increase performance. The original propulsion systems were modeled both graphically in CAD and via equations. Due to the limited availability of published information, it was necessary to create a more detailed, secondary set of models. Various engineering equations---pertinent to rocket engine design---were implemented in order to generate the desired extra detail. This study describes how these new models were then imported into the ESI CFD Suite. Various parameters are applied to these imported models as inputs that include, for example, bi-propellant combinations, pressure, temperatures, and mass flow rates. The results were then processed with ESI VIEW, which is visualization software. The output files were analyzed for forces in the nozzle, and various results were generated, including sea level thrust and ISP. Experimental data are provided to compare the original engine configuration models to the derivative suggested improvement models.

Bianchi Type-I, V and VIo models in modified generalized scalar ...

Indian Academy of Sciences (India)

Keywords. Bianchi type; scalar–tensor theory; cosmological term; scalar field. ... We obtain exact solutions of the field equations in Bianchi Type-I, V and VIo space–times. The evolution of the scale factor ... Pramana – Journal of Physics | News.

Temperature dependent I-V characteristics of an Au/n-GaAs Schottky diode analyzed using Tung’s model

Science.gov (United States)

Korucu, Demet; Turut, Abdulmecit; Efeoglu, Hasan

2013-04-01

The current-voltage (I-V) characteristics of Au/n-GaAs contacts prepared with photolithography technique have been measured in the temperature range of 80-320 K. The ideality factor and barrier height (BH) values have remained almost unchanged between 1.04 and 1.10 and at a value of about 0.79 eV at temperatures above 200 K, respectively. Therefore, the ideality factor values near unity say that the experimental I-V data are almost independent of the sample temperature, that is, contacts have shown excellent Schottky diode behavior above 200 K. An abnormal decrease in the experimental BH Φb and an increase in the ideality factor with a decrease in temperature have been observed below 200 K. This behavior has been attributed to the barrier inhomogeneity by assuming a Gaussian distribution of nanometer-sized patches with low BH at the metal-semiconductor interface. The barrier inhomogeneity assumption is also confirmed by the linear relationship between the BH and the ideality factor. According to Tung’s barrier inhomogeneity model, it has been seen that the value of σT=7.41×10-5 cm2/3 V1/3from ideality factor versus (kT)-1 curve is in close agreement with σT=7.95×10-5 cm2/3 V1/3 value from the Φeff versus (2kT)-1 curve in the range of 80-200 K. The modified Richardson ln(J0/T2)-(qσT)2(Vb/η)2/3/[2(kT)2] versus (kT)-1 plot, from Tung’s Model, has given a Richardson constant value of 8.47 A cm-2 K-2which is in very close agreement with the known value of 8.16 A cm-2 K-2 for n-type GaAs; considering the effective patch area which is significantly lower than the entire geometric area of the Schottky contact, in temperature range of 80-200 K. Thus, it has been concluded that the use of Tung’s lateral inhomogeneity model is more appropriate to interpret the temperature-dependent I-V characteristics in the Schottky contacts.

Congestion based mechanism for route discovery in a V2I-V2V system applying smart devices and IoT.

Science.gov (United States)

Parrado, Natalia; Donoso, Yezid

2015-03-31

The Internet of Things is a new paradigm in which objects in a specific context can be integrated into traditional communication networks to actively participate in solving a determined problem. The Vehicle-to-Vehicle (V2V) and Vehicle-to-Infrastructure (V2I) technologies are specific cases of IoT and key enablers for Intelligent Transportation Systems (ITS). V2V and V2I have been widely used to solve different problems associated with transportation in cities, in which the most important is traffic congestion. A high percentage of congestion is usually presented by the inappropriate use of resources in vehicular infrastructure. In addition, the integration of traffic congestion in decision making for vehicular traffic is a challenge due to its high dynamic behavior. In this paper, an optimization model over the load balancing in the congestion percentage of the streets is formulated. Later, we explore a fully congestion-oriented route discovery mechanism and we make a proposal on the communication infrastructure that should support it based on V2I and V2V communication. The mechanism is also compared with a modified Dijkstra's approach that reacts at congestion states. Finally, we compare the results of the efficiency of the vehicle's trip with the efficiency in the use of the capacity of the vehicular network.

Congestion Based Mechanism for Route Discovery in a V2I-V2V System Applying Smart Devices and IoT

Directory of Open Access Journals (Sweden)

Natalia Parrado

2015-03-01

Full Text Available The Internet of Things is a new paradigm in which objects in a specific context can be integrated into traditional communication networks to actively participate in solving a determined problem. The Vehicle-to-Vehicle (V2V and Vehicle-to-Infrastructure (V2I technologies are specific cases of IoT and key enablers for Intelligent Transportation Systems (ITS. V2V and V2I have been widely used to solve different problems associated with transportation in cities, in which the most important is traffic congestion. A high percentage of congestion is usually presented by the inappropriate use of resources in vehicular infrastructure. In addition, the integration of traffic congestion in decision making for vehicular traffic is a challenge due to its high dynamic behavior. In this paper, an optimization model over the load balancing in the congestion percentage of the streets is formulated. Later, we explore a fully congestion-oriented route discovery mechanism and we make a proposal on the communication infrastructure that should support it based on V2I and V2V communication. The mechanism is also compared with a modified Dijkstra’s approach that reacts at congestion states. Finally, we compare the results of the efficiency of the vehicle’s trip with the efficiency in the use of the capacity of the vehicular network.

Inner ionization in A sup I sup I B sup V sup I

CERN Document Server

Komashchenko, A V; Kolezhuk, K V; Sheremetova, G I; Fursenko, V D; Bobrenko, Y N

2002-01-01

The dependences of the sensitivity of the p-Cu sub 1 sub . sub 8 S/n-A sup I sup I B sup V sup I -type surface-barrier heterostructures on the energy of exciting photons or accelerated monoenergetic electron beams are investigated. A technique for determination of the mean internal ionization energy epsilon in direct-gap A sup I sup I B sup V sup I compounds is suggested and epsilon values are found experimentally. It is shown that the relationship between epsilon and the semiconductor energy gap E sub g is given by the following expression epsilon 2.5E sub g

Measurements of iT11 in πd elastic scattering at 49 MeV

International Nuclear Information System (INIS)

Kohler, M.; Stevenson, N.R.

1993-10-01

Measurements of the vector analyzing power iT 11 in πd elastic scattering at 49 MeV have been performed using a dynamically polarized target and a magnetic spectrometer. Data at seven π + laboratory scattering angles between 50 deg. and 130 deg. were taken together with a complementary measurement at 60 deg. for π - d elastic scattering. In general, we find agreement with models that include the πN P 11 amplitude and disagreement with models that exclude or suppress it. (authors) 17 refs., 1 tab., 2 figs

Device Modeling of the Performance of Cu(In,GaSe2 Solar Cells with V-Shaped Bandgap Profiles

Directory of Open Access Journals (Sweden)

Shou-Yi Kuo

2014-01-01

Full Text Available The effect of Cu(In,GaSe2 (CIGS with V-shaped bandgap on device performance is investigated in detail. A series of Ga/(In+Ga ratio are set to study the influence of V-shaped bandgap profile on the electricity of CIGS thin film solar cells. The modeling of device current density-voltage (J-V curve and bandgap grading profile corresponded well to measurement results. Detailed characteristic and modeling results show that an increased gradient of bandgap from valley to the buffer layer CdS will result in a barrier and lead to an enhanced recombination in the valley. This phenomenon can be modified by the back electric field resulting from a gradient bandgap from valley (bandgap minimum to the Mo back contact. These results indicate CIGS-based solar cells can achieve higher performance by optimizing the V-shaped bandgap profile.

Performance predictions for solar-chemical converters based on photoelectrochemical I-V curves

Energy Technology Data Exchange (ETDEWEB)

Luttmer, J.D.; Trachtenberg, I.

1985-06-01

Texas Instruments' solar energy system contains a solar-chemical converter (SCC) which converts solar energy into chemical energy via the electrolysis of hydrobromic acid (HBr) into hydrogen (H/sub 2/) and bromine (Br/sub 2/). Previous predictions of SCC performance have employed electrical dry-probe data and a computer simulation model to predict the H/sub 2/ generation rates. The method of prediction described here makes use of the photoelectrochemical Icurves to determine the ''wet'' probe parameters of V /SUB oc/ J /SUB sc/ FF, and efficiency for anodes and cathodes. The advantages of this technique over the dry-probe/computer simulation method are discussed. A comparison of predicted and measured H/sub 2/ generation rates is presented. Solar to chemical efficiencies of 8.6% have been both predicted and measured for the electrolysis of 48% HBr to hydrogen and bromine by a full anode/cathode array. Individual cathode solar to hydrogen efficiencies of 9.5% have been obtained.

Control-Oriented Models for SO Fuel Cells from the Angle of V&V: Analysis, Simplification Possibilities, Performance

Directory of Open Access Journals (Sweden)

Ekaterina Auer

2017-12-01

Full Text Available In this paper, we take a look at the analysis and parameter identification for control-oriented, dynamic models for the thermal subsystem of solid oxide fuel cells (SOFC from the systematized point of view of verification and validation (V&V. First, we give a possible classification of models according to their verification degree which depends, for example, on the kind of arithmetic used for both formulation and simulation. Typical SOFC models, consisting of several coupled differential equations for gas preheaters and the temperature distribution in the stack module, do not have analytical solutions because of spatial nonlinearity. Therefore, in the next part of the paper, we describe in detail two possible ways to simplify such models so that the underlying differential equations can be solved analytically while still being sufficiently accurate to serve as the basis for control synthesis. The simplifying assumption is to approximate the heat capacities of the gases by zero-order polynomials (or first-oder polynomials, respectively in the temperature. In the last, application-oriented part of the paper, we identify the parameters of these models as well as compare their performance and their ability to reflect the reality with the corresponding characteristics of models in which the heat capacities are represented by quadratic polynomials (the usual case. For this purpose, the framework UniVerMeC (Unified Framework for Verified GeoMetric Computations is used, which allows us to employ different kinds of arithmetics including the interval one. This latter possibility ensures a high level of reliability of simulations and of the subsequent validation. Besides, it helps to take into account bounded uncertainty in measurements.

Kinetic study of time-dependent fixation of U"V"I on biochar

International Nuclear Information System (INIS)

Ashry, A.; Bailey, E.H.; Chenery, S.R.N.; Young, S.D.

2016-01-01

Biochar, a by-product from the production of biofuel and syngas by gasification, was tested as a material for adsorption and fixation of U"V"I from aqueous solutions. A batch experiment was conducted to study the factors that influence the adsorption and time-dependent fixation on biochar at 20 °C, including pH, initial concentration of U"V"I and contact time. Uranium (U"V"I) adsorption was highly dependent on pH but adsorption on biochar was high over a wide range of pH values, from 4.5 to 9.0, and adsorption strength was time-dependent over several days. The experimental data for pH > 7 were most effectively modelled using a Freundlich adsorption isotherm coupled to a reversible first order kinetic equation to describe the time-dependent fixation of U"V"I within the biochar structure. Desorption experiments showed that U"V"I was only sparingly desorbable from the biochar with time and isotopic dilution with "2"3"3U"V"I confirmed the low, or time-dependent, lability of adsorbed "2"3"8U"V"I. Below pH 7 the adsorption isotherm trend suggested precipitation, rather than true adsorption, may occur. However, across all pH values (4.5-9) measured saturation indices suggested precipitation was possible: autunite below pH 6.5 and either swartzite, liebigite or bayleyite above pH 6.5.

A Thermodynamic Model for Acetate and Lactate Complexation with Am(III), Th(IV), Np(V)and U(V I) Valid to High Ionic Strength

International Nuclear Information System (INIS)

Moore, C.R.; Free, S.J.; Bynum, R.V.

1999-01-01

The organic ligands acetate, lactate, oxalate and EDTA have been identified as components of wastes targeted for disposal in the Waste Isolation Pilot Plant (WIPP) located in Southeastern New Mexico. The presence of these ligands may increase dissolved actinide concentrations and impact chemical radiation during transport. The current work considers the complexation of Am(III), Th (IV) , Np(V), and U(V I) with two of the organic ligands, acetate and lactate, in Na CI media from dilute through high concentration. A thermodynamic model for actinide complexation with the organic ligands has been developed based on the Pitzer activity coefficient formalism and the Harvie-Moller-Weare, Felmy-Weare database for describing brine evaporites systems. The model was parameterized using first apparent stability constant data from the literature. Because of complexation of other metal ions (Fe, Mg, Ni, Pb, etc.) present in the WIPP disposal room with the organic ligands, preliminary results from model calculations indicate the organic ligands do not significantly increase dissolved actinide concentrations

Application of mathematical and computer methods in mine rescue. Primeneniye matematicheskikh metodov i EVM v gornospasatel'nom dele

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

The collection contains the following articles: ''Control automation in mine rescue''. Khudosovtzev N.M., Teper V.B., Shschukin O.F.; ''Selection of optimal control of fire-fighting equipment''. Kozlyuk A.I., Charkov V.P., Teper V.B.; ''Formal approach to describing the process of underground fire extinguishing''. Kozlyu, A.I., Teper V.B., Romanchuk A.L.,; ''Computer selection of rescue and accident prevention methods using situation control methods''. Starovoitov V.T., Tomarovshschenko V.D., Koifman Yu. L., Plepler R.,; ''Planning experiments for studying the foam generation process using a steam-gas mixture''. Karyagina N.V., Makarenko V.L., Zhukova N.E., Shkodskikh V.I.; ''Mathematical model of the temperature field of spontaneous coal combustion in a mined out area''. Chuntu G.I., Kalyusskii A.E., Lysenko E.P., Gusar G.A.; ''Mathematical model of the cooling process of rock by a gas flow''. Kleiner A.A., Semko V.N.; ''M/G/I system with selfcontained servicing''. Skripnik V.M.; ''Closed-circuit servicing with mobile one-channel devices''. Skripnik V.M.; ''Analysis of methods for describing accident situations when modelling mine rescue operations''. Shschukin O.F., Brusentzev G.K., Laktionov O.A.; ''PROLOG system and the solution to several artificial intelligence problems''. Belov V.N., Branovitzkii V.I., Getzko L.N., Kudryavtzeva S.P., Seraya V.V.; ''Representation of knowledge in interactive systems''. Branovitzkii V.I., Getzko L.N., Kudryavtzeva S.P., Sakhno A.A., Seraya V.V.; ''Programming the selection of fire extinguishing equipment for rapid control of underground fire fighting using a computer''. Teper V.B., Ibchenko I.B., Bychkov G.D.; ''Interactive method to assess the effectiveness of exogenous fire fighting methods''. Brusentzev G.K., Shschukin O.F., Laktionov O.A., Shulga O.N.; ''Practical instruction using the automatic 'mine rescuer' system''.

High Performance Electrical Modeling and Simulation Verification Test Suite - Tier I; TOPICAL

International Nuclear Information System (INIS)

SCHELLS, REGINA L.; BOGDAN, CAROLYN W.; WIX, STEVEN D.

2001-01-01

This document describes the High Performance Electrical Modeling and Simulation (HPEMS) Global Verification Test Suite (VERTS). The VERTS is a regression test suite used for verification of the electrical circuit simulation codes currently being developed by the HPEMS code development team. This document contains descriptions of the Tier I test cases

A modified phase coherence model for the non-linear c-axis V-I characteristics of highly anisotropic, high temperature superconductors

CERN Document Server

Luo Sheng; Huang Sai Jun; He Yu Sheng; Li Chun Guang; Zhang Xue Qiang

2003-01-01

A modified Ambegaokar-Halperin thermal-fluctuation model has been developed to describe the c-axis V-I characteristics and low-current ohmic resistance of highly anisotropic superconductors in a magnetic field parallel to the c-axis. The model assumes loss of phase coherence across the CuO-planes associated with the correlated motion of pancake vortices in the liquid state. The predicted V-I characteristics in the current-induced transition from the superconducting to the resistive state are in good agreement with measurements on a 2212-BSCCO single crystal as a function of temperature and field, provided the effect of the interlayer capacitance is taken into account. The measurements are consistent with a flux pancake correlation length within the CuO-planes varying as xi sub 0 /(T/T sub 0 - 1) supnu, where xi sub 0 = 1.57 +- 0.08 mu m and nu = 0.50 +- 0.01. Our measurements imply a current-dependent interlayer resistance above and below T sub c.

Current and future possibilities of V2V and I2V technologies: an analysis directed toward Augmented Reality systems

Science.gov (United States)

Betancur, J. A.; Osorio-Gómez, Gilberto; Arnedo, Aida; Yarce Botero, Andrés.

2014-06-01

Nowadays, it is very important to explore the qualitative characteristics of autonomous mobility systems in automobiles, especially disruptive technology like Vehicle to Vehicle (V2V) and Infrastructure to Vehicle (I2V), in order to comprehend how the next generation of automobiles will be developed. In this sense, this research covers a general review about active safety in automobiles where V2V and I2V systems have been implemented; identifying the more realistic possibilities related to V2V and I2V technology and analyzing the current applications, some systems in development process and some future conceptual proposals. Mainly, it is notorious the potential development of mixing V2V and I2V systems pointing to increase the driver's attention; therefore, a configuration between these two technologies and some augmented reality system for automobiles (Head-Up Display and Head-Down Display) is proposed. There is a huge potential of implementation for this kind of configuration once the normative and the roadmap for its development can be widely established.

YBCO single crystals I-V characteristics nonlinearity and Nelson-Kosterlitz jump

International Nuclear Information System (INIS)

Kuzmichev, N.D.; Vasyutin, M.A.; Golovashkin, A.I.

2007-01-01

Temperature dependences of I-V characteristics and voltage harmonics V n (T) (n = 2, 3, ...) have been investigated in magnetic fields up to 200 Oe for single crystals YBa 2 Cu 3 O 7-x . It was shown that V n (T) had asymmetric peak form with maximum at T* = 92.0 K. Amplitudes of V n (T) were decreased in magnetic fields. The results were explained on the base of the Berezinskii-Kosterlitz-Thouless (BKT) transition model. It was shown that T* coincided with the BKT transition temperature T BKT . The asymmetric peaks of V n (T) are a consequence of the Nelson-Kosterlitz jump

An extended collection length model for the description of keV-electron induced degradation and thermal recovery of p-i-n solar cells

International Nuclear Information System (INIS)

Schneider, U.; Schroder, B.

1990-01-01

The results of keV-electron degradation and annealing experiments obtained on a-Si:H based p-i-n solar cells are interpretated under inclusion of models developed earlier for the degradation of a-Si:H films and are placed in the framework of an extended collection length model. The strong degradation of the cell parameters j sc and FF due to considerable keV-electron irradiation can be explained quantitatively. This enables a crucial test of the validity of the mathematical models for the keV-electron induced effects developed so far. Furthermore the results of a detailed investigation of the thermal recovery of electron-degraded solar cells can be cleared up consistently. Some unresolved issues are discussed, and experiments to resolve these questions are proposed

Le projet français P.I.V.E.R.T.

Directory of Open Access Journals (Sweden)

Rous Jean-François

2012-11-01

Full Text Available P.I.V.E.R.T. is an ambitious project of development of the 3rd generation biorefinery by 2020. Conceived around a technological complex with strict environmental criteria (aiming at obtaining a label HQE, P.I.V.E.R.T. federates all the national and main roads lifeblood, of the sector (some international partnerships are also under development. The major objectives of the P.I.V.E.R.T. project are: a valorization of oilseeds, proteins and lignocellulosic plant in its entirety (approach ‘‘entire plants’’ ; an operation in closed circuit on the level of water and energy exchanges, the platform providing for its own needs, in a logic of industrial ecology ; collection and valorization of a significant part of the CO2 produced by the activities of the refinery. Two strategies will be developed jointly: on one hand the development of ‘‘platform’’ molecules entering the traditional circuits of chemistry, on the current markets with the renewable character, in addition, the development of new molecules having new properties, thus giving access to new markets. Thanks to the research and development realized by researchers dedicated to P.I.V.E.R.T., the industrial partners will have access to a capable structure to develop, and to test demonstrators preceding future industrial production units. Certain technological bricks could be tested in a large scale industrial platform dedicated to operational integration of innovations. The development of programming technologies of refineries will give to P.I.V.E.R.T. the means to develop new innovative processes and will give to the industrials the possibility of modeling their future production units.

A Framework for Performing V&V within Reuse-Based Software Engineering

Science.gov (United States)

Addy, Edward A.

1996-01-01

Verification and validation (V&V) is performed during application development for many systems, especially safety-critical and mission-critical systems. The V&V process is intended to discover errors, especially errors related to critical processing, as early as possible during the development process. Early discovery is important in order to minimize the cost and other impacts of correcting these errors. In order to provide early detection of errors, V&V is conducted in parallel with system development, often beginning with the concept phase. In reuse-based software engineering, however, decisions on the requirements, design and even implementation of domain assets can be made prior to beginning development of a specific system. In this case, V&V must be performed during domain engineering in order to have an impact on system development. This paper describes a framework for performing V&V within architecture-centric, reuse-based software engineering. This framework includes the activities of traditional application-level V&V, and extends these activities into domain engineering and into the transition between domain engineering and application engineering. The framework includes descriptions of the types of activities to be performed during each of the life-cycle phases, and provides motivation for the activities.

Make-up of injector test stand (ITS-1) and preliminary results with Model-I ion source

International Nuclear Information System (INIS)

Matsuda, S.; Ito, T.; Kondo, U.; Ohara, Y.; Oga, T.; Shibata, T.; Shirakata, H.; Sugawara, T.; Tanaka, S.

Constitution of the 1-st injector test stand (ITS-1) in the Thermonuclear Division, JAERI, and the performance of the Model-I ion source are described. Heating a plasma by neutral beam injection is one of the promising means in the thermonuclear fusion devices. Purpose of the test stand is to develop the ion sources used in such injection systems. The test stand was completed in February 1975, which is capable of testing the ion sources up to 12 amps at 30 kV. A hydrogen ion beam of 5.5 amps at 25 kV was obtained in the Model-I ion source

Intelligent fault diagnosis of photovoltaic arrays based on optimized kernel extreme learning machine and I-V characteristics

International Nuclear Information System (INIS)

Chen, Zhicong; Wu, Lijun; Cheng, Shuying; Lin, Peijie; Wu, Yue; Lin, Wencheng

2017-01-01

Highlights: •An improved Simulink based modeling method is proposed for PV modules and arrays. •Key points of I-V curves and PV model parameters are used as the feature variables. •Kernel extreme learning machine (KELM) is explored for PV arrays fault diagnosis. •The parameters of KELM algorithm are optimized by the Nelder-Mead simplex method. •The optimized KELM fault diagnosis model achieves high accuracy and reliability. -- Abstract: Fault diagnosis of photovoltaic (PV) arrays is important for improving the reliability, efficiency and safety of PV power stations, because the PV arrays usually operate in harsh outdoor environment and tend to suffer various faults. Due to the nonlinear output characteristics and varying operating environment of PV arrays, many machine learning based fault diagnosis methods have been proposed. However, there still exist some issues: fault diagnosis performance is still limited due to insufficient monitored information; fault diagnosis models are not efficient to be trained and updated; labeled fault data samples are hard to obtain by field experiments. To address these issues, this paper makes contribution in the following three aspects: (1) based on the key points and model parameters extracted from monitored I-V characteristic curves and environment condition, an effective and efficient feature vector of seven dimensions is proposed as the input of the fault diagnosis model; (2) the emerging kernel based extreme learning machine (KELM), which features extremely fast learning speed and good generalization performance, is utilized to automatically establish the fault diagnosis model. Moreover, the Nelder-Mead Simplex (NMS) optimization method is employed to optimize the KELM parameters which affect the classification performance; (3) an improved accurate Simulink based PV modeling approach is proposed for a laboratory PV array to facilitate the fault simulation and data sample acquisition. Intensive fault experiments are

The I-V Measurement System for Solar Cells Based on MCU

International Nuclear Information System (INIS)

Chen Fengxiang; Ai Yu; Wang Jiafu; Wang Lisheng

2011-01-01

In this paper, an I-V measurement system for solar cells based on Single-chip Microcomputer (MCU) is presented. According to the test principles of solar cells, this measurement system mainly comprises of two parts-data collecting, data processing and displaying. The MCU mainly used as to acquire data, then the collecting results is sent to the computer by serial port. The I-V measurement results of our test system are shown in the human-computer interaction interface based on our hardware circuit. By comparing the test results of our I-V tester and the results of other commercial I-V tester, we found errors for most parameters are less than 5%, which shows our I-V test result is reliable. Because the MCU can be applied in many fields, this I-V measurement system offers a simple prototype for portable I-V tester for solar cells.

The I-V Measurement System for Solar Cells Based on MCU

Energy Technology Data Exchange (ETDEWEB)

Chen Fengxiang; Ai Yu; Wang Jiafu; Wang Lisheng, E-mail: phonixchen79@yahoo.com.cn [Department of physics science and technology, Wuhan University of Technology, Wuhan city, Hubei Province, 430070 (China)

2011-02-01

In this paper, an I-V measurement system for solar cells based on Single-chip Microcomputer (MCU) is presented. According to the test principles of solar cells, this measurement system mainly comprises of two parts-data collecting, data processing and displaying. The MCU mainly used as to acquire data, then the collecting results is sent to the computer by serial port. The I-V measurement results of our test system are shown in the human-computer interaction interface based on our hardware circuit. By comparing the test results of our I-V tester and the results of other commercial I-V tester, we found errors for most parameters are less than 5%, which shows our I-V test result is reliable. Because the MCU can be applied in many fields, this I-V measurement system offers a simple prototype for portable I-V tester for solar cells.

Angular-dependent I-V characteristics in borocarbide superconductor YNi2B2C

International Nuclear Information System (INIS)

Chu, R M; Chen, Q Y; Chu, W K

2006-01-01

We present angular-dependent current-voltage (I-V) measurements in borocarbide YNi 2 B 2 C single crystals near the vortex-glass irreversible line. External magnetic fields are applied along the angle θ with respect to the c-axis. The nonlinear I-V curves reveal scaling behaviour near the transition. Using the scaling analysis, the relevant critical exponents and vortex transition temperatures are determined for all orientations. The data agrees well with the vortex-glass (VG) model. No evidence was found that supports the existence of a Bose-glass (BG) type of transition

K-Ras(V14I) -induced Noonan syndrome predisposes to tumour development in mice.

Science.gov (United States)

Hernández-Porras, Isabel; Schuhmacher, Alberto J; Garcia-Medina, Raquel; Jiménez, Beatriz; Cañamero, Marta; de Martino, Alba; Guerra, Carmen

2016-06-01

The Noonan syndrome (NS) is an autosomal dominant genetic disorder characterized by short stature, craniofacial dysmorphism, and congenital heart defects. A significant proportion of NS patients may also develop myeloproliferative disorders (MPDs), including juvenile myelomonocytic leukaemia (JMML). Surprisingly, scarce information is available in relation to other tumour types in these patients. We have previously developed and characterized a knock-in mouse model that carries one of the most frequent KRAS-NS-related mutations, the K-Ras(V14I) substitution, which recapitulates most of the alterations described in NS patients, including MPDs. The K-Ras(V14I) mutation is a mild activating K-Ras protein; thus, we have used this model to study tumour susceptibility in comparison with mice expressing the classical K-Ras(G12V) oncogene. Interestingly, our studies have shown that these mice display a generalized tumour predisposition and not just MPDs. In fact, we have observed that the K-Ras(V14I) mutation is capable of cooperating with the p16Ink4a/p19Arf and Trp53 tumour suppressors, as well as with other risk factors such as pancreatitis, thereby leading to a higher cancer incidence. In conclusion, our results illustrate that the K-Ras(V14I) activating protein is able to induce cancer, although at a much lower level than the classical K-Ras(G12V) oncogene, and that it can be significantly modulated by both genetic and non-genetic events. Copyright © 2016 Pathological Society of Great Britain and Ireland. Published by John Wiley & Sons, Ltd. Copyright © 2016 Pathological Society of Great Britain and Ireland. Published by John Wiley & Sons, Ltd.

Korekcija temperature v tunelski peči

OpenAIRE

DOLENC, PETER

2016-01-01

Cilj diplomske naloge je bil programsko odpraviti problem preveč zapečenih izdelkov v serijski proizvodnji peke kruha. Ta problem nastane, ko se zaradi določenega razloga, kot je npr. menjava vrste izdelka, pojavi večja luknja na tekočem traku. Vnos testa v peč je v tem primeru močno zmanjšan in posledično prihaja do dviga temperature v območju in okolici luknje. Programska logika peči teče na programirljivem logičnem krmilniku. Program je večinoma izdelan v lestvičnem diagramu, določene ...

Analysis of series resistance effects on forward I - V and C - V characteristics of mis type diodes

International Nuclear Information System (INIS)

Altindal, S.; Tekeli, Z.; Karadeniz, S.; Tugluoglu, N.; Ercan, I.

2002-01-01

In order to determine the series resistance R s , we have followed Lie et al., Cheung et al. and Kang et al., from the plot of I vs dV/dLn(I) which was linear curve over a wide range of current values at each temperature. The values of Rs were obtained from the slope of the linear parts of the curves and then the series resistance at each temperature has been evaluated at Ln(I) vs (V-IR s ) curves. The curves are linear over a wide range of voltage. The most reliable values of ideality factor n and reverse saturation current Is were then determined. In addition to role of series resistance on the C-V and G-V characteristics of diode have been investigated. Both C-V and G-V measurements show that the measured capacitance and conductance seriously varies with applied bias and frequency due to presence of R s . The density of interface states, barrier height and series resistance from the forward bias I-V characteristics using this method agrees very well with that obtained from the capacitance technique. It is clear that ignoring the series resistance (device with high series resistance) can lead to significant errors in the analysis of the I-V-T, C-V-f and G-V-f characteristics

ATLAS Physics Objects Status and Performance at 13 TeV

CERN Document Server

Riu, Imma; The ATLAS collaboration

2015-01-01

Important for physics analyses is the understanding and commissioning of physics objects. A first look at the 13 TeV data has proved a reasonably good Monte Carlo modelling of the objects and they have been used for first physics measurements and searches beyond the Standard Model. This talk is to be given at the Top Workshop and provides an overview of the status and performance of the physics objects with the early 13 TeV data taken in summer 2015.

vSphere high performance cookbook

CERN Document Server

Sarkar, Prasenjit

2013-01-01

vSphere High Performance Cookbook is written in a practical, helpful style with numerous recipes focusing on answering and providing solutions to common, and not-so common, performance issues and problems.The book is primarily written for technical professionals with system administration skills and some VMware experience who wish to learn about advanced optimization and the configuration features and functions for vSphere 5.1.

Analysis of p-bar p scattering at 31 GeV and 62 GeV by the Chou-Yang model

International Nuclear Information System (INIS)

Padua, A.B. de; Covolan, R.J.M.; Souza Paes, J.T. de

1988-01-01

The p-bar p scattering is analysed at 31 GeV and 62 GeV energies for momentum transfers in the range O 2 . The experimental (dσ/dt)p-bar p values were fitted using a pure imaginary written as a sum of exponentials, that is, a(s,t)=a(s,O) σ n i=l α i e βit . Using the parameters obtained we have calculated the absorption constant K p-bar p the form factor and the mean square radius of the p-bar matter distribuition by the Chou-Yang model. These calculations reveal a ''dip'' around -t approx.= 1.3 (GeV/c) 2 at 31 GeV and 62 GeV. (author) [pt

Chronic hepatitis C in i. v. drug abusers

Directory of Open Access Journals (Sweden)

Lukač-Radončić Elvira

2011-01-01

Full Text Available In our work we present the clinical, biochemical, serologic and pathohistologic characteristics of chronic HCV infection in i. v. drag abusers treated in the Clinic for infections diseases in Kragujevac, in period of 3 years (2007-2009. year. In 17 i. v. drug abusers were examined, 13 men and 4 women, with chronic hepatitis C. Average age was 26,82 years. Duration of i. v. drug use was different from 1 year to 11 years. All patients were without com- plaints. Regarding functional liver tests level of amino-transferases was elevated: AST --50,37 Ш and ALT - 97,3 7U/1, total bilimbin was normal. On pathohistologic examination in 12 was found minimal chronic hepatitis, in 3 very active chronic hepatitis with pronounced piece meal necrosis and bridging necrosis, one patient was cirrhosis.

The short-circuit test results of 6.9 kV/2.3 kV 400 kVA-class YBCO model transformer with fault current limiting function

International Nuclear Information System (INIS)

Tomioka, A.; Bohno, T.; Kakami, S.; Isozaki, M.; Watanabe, K.; Toyama, K.; Sugiyama, S.; Konno, M.; Gosho, Y.; Okamoto, H.; Hayashi, H.; Tsutsumi, T.; Iwakuma, M.; Saito, T.; Tanabe, K.; Shiohara, Y.

2013-01-01

Highlights: ► We manufactured the 400 kV A-class YBCO model transformer with FCL function. ► Short-circuit test was performed by applying 6.9 kV on primary side. ► The short-circuit current was limited to 174 A for a prospective current of 559 A. ► It agreed with the design and we also confirmed the I c did not degrade. ► The results suggest the possibility to design YBCO transformers with FCL function. -- Abstract: We are developing an elemental technology for 66/6.9 kV 20 MVA-class superconducting power transformer with fault current limiting function. In order to obtain the characteristics of YBCO conductor when the AC over current supplied to the conductor, the model coils were manufactured with YBCO tapes and tested. Based on these results, we manufactured the 6.9 kV/2.3 kV 400 kVA-class YBCO model transformer with fault current limiting function and performed short-circuit test. At the 0.25 s after short-circuit, the short-circuit current of primary winding was limited to about 174 A for a prospective current of 559 A. It was consistent with the design. The I–V characteristics of the winding did not change before and after the test. We consider the model transformer to be able to withstand AC over-current with the function of current limiting. The results suggest the possibility to design YBCO superconducting transformers with fault current limiting function for practical power grid

Kazan period of life-sustaining activity of professor V.I. Ra-zumovsky — a pioneer of Russian neurosurgery

Directory of Open Access Journals (Sweden)

Danilov V.I.

2012-06-01

Full Text Available There were presented historical data of life-sustaining activity of professor V. I. Razumovsky — a pioneer of Russian neurosurgery, who began to perform and then was performing systematically neurosurgical operations in the Kazan clinic under the guidance of outstanding neurologists V. M. Bekhterev and L. O. Darkshevich.

Plant modeling as a key tool for nuclear I and C design and V and V

International Nuclear Information System (INIS)

Krasnov, V.; Sokolov, O.; Symkin, B.

2006-01-01

This paper summarizes an intensive experience of LvivORGRES in the design and implementation of the digital control systems at VVER-1000 and VVER-440 nuclear power plants in Ukraine and Bulgaria. This experience is applicable to the digital I and C upgrade projects for other types of reactor equipment as well as to the design and testing of new I and C systems for new constructions. LvivORGRES was recently involved in several modernization projects as a functional designer and, also, provided technical support and supervision during the factory and site acceptance testing. It is widely accepted and proved by the industry's practice that a level and quality of system validation at all design and implementation phases are key to the successful future operation of I and C systems. The plant control systems have some additional validation requirements in comparing with the information and monitoring systems. According to the Ukrainian nuclear regulation standards, the scope of the control system projects should include the close loop stability analysis at all unit modes of operation. Besides the control system algorithms verification and validation, it was necessary to determine the tuning parameters for the system and use them initially during the system commissioning. LvivORGRES has developed the Adaptive Plant Modeling process that was used as a key tool in all design stages of control system upgrade projects: Software engineering tests, Integrated system validation tests, Factory acceptance tests. The Plant Model was developed on a modular basis which allowed the testing of all primary and secondary side regulators for all unit modes of operation including transients and unit start-up and shutdown. The Plant Model has been adapted to each project's requirements. The use of the plant simulation provided technical bases for important project decisions and documents including among others: system test strategy, initial tuning parameters, training plan, etc. The Plant

Větrné podmínky v České republice ve výšce 10 m nad povrchem I

Czech Academy of Sciences Publication Activity Database

Hanslian, David; Hošek, Jiří; Chládová, Zuzana; Pop, Lukáš

2013-01-01

Roč. 2013, 15.4.2013 (2013), s. 1-5 ISSN 1801-4399 Institutional support: RVO:68378289 Keywords : Wind map * WAsP model * Czech Republic * PIAP model * VAS method Subject RIV: JE - Non-nuclear Energetics, Energy Consumption ; Use http://oze.tzb-info.cz/vetrna-energie/9770-vetrne-podminky-v-ceske-republice-ve-vysce-10-m-nad-povrchem-i

Quantum state-to-state dynamics for the quenching process of Br(2P1/2) + H2(v(i) = 0, 1, j(i) = 0).

Science.gov (United States)

Xie, Changjian; Jiang, Bin; Xie, Daiqian; Sun, Zhigang

2012-03-21

Quantum state-to-state dynamics for the quenching process Br((2)P(1/2)) + H(2)(v(i) = 0, 1, j(i) = 0) → Br((2)P(3/2)) + H(2)(v(f), j(f)) has been studied based on two-state model on the recent coupled potential energy surfaces. It was found that the quenching probabilities have some oscillatory structures due to the interference of reflected flux in the Br((2)P(1/2)) + H(2) and Br((2)P(3/2)) + H(2) channels by repulsive potential in the near-resonant electronic-to-vibrational energy transfer process. The final vibrational state resolved integral cross sections were found to be dominated by the quenching process Br((2)P(1/2)) + H(2)(v) → Br((2)P(3/2)) + H(2)(v+1) and the nonadiabatic reaction probabilities for Br((2)P(1/2)) + H(2)(v = 0, 1, j(i) = 0) are quite small, which are consistent with previous theoretical and experimental results. Our calculated total quenching rate constant for Br((2)P(1/2)) + H(2)(v(i) = 0, j(i) = 0) at room temperature is in good agreement with the available experimental data. © 2012 American Institute of Physics

The on-line coupled atmospheric chemistry model system MECO(n) - Part 5: Expanding the Multi-Model-Driver (MMD v2.0) for 2-way data exchange including data interpolation via GRID (v1.0)

Science.gov (United States)

Kerkweg, Astrid; Hofmann, Christiane; Jöckel, Patrick; Mertens, Mariano; Pante, Gregor

2018-03-01

As part of the Modular Earth Submodel System (MESSy), the Multi-Model-Driver (MMD v1.0) was developed to couple online the regional Consortium for Small-scale Modeling (COSMO) model into a driving model, which can be either the regional COSMO model or the global European Centre Hamburg general circulation model (ECHAM) (see Part 2 of the model documentation). The coupled system is called MECO(n), i.e., MESSy-fied ECHAM and COSMO models nested n times. In this article, which is part of the model documentation of the MECO(n) system, the second generation of MMD is introduced. MMD comprises the message-passing infrastructure required for the parallel execution (multiple programme multiple data, MPMD) of different models and the communication of the individual model instances, i.e. between the driving and the driven models. Initially, the MMD library was developed for a one-way coupling between the global chemistry-climate ECHAM/MESSy atmospheric chemistry (EMAC) model and an arbitrary number of (optionally cascaded) instances of the regional chemistry-climate model COSMO/MESSy. Thus, MMD (v1.0) provided only functions for unidirectional data transfer, i.e. from the larger-scale to the smaller-scale models.Soon, extended applications requiring data transfer from the small-scale model back to the larger-scale model became of interest. For instance, the original fields of the larger-scale model can directly be compared to the upscaled small-scale fields to analyse the improvements gained through the small-scale calculations, after the results are upscaled. Moreover, the fields originating from the two different models might be fed into the same diagnostic tool, e.g. the online calculation of the radiative forcing calculated consistently with the same radiation scheme. Last but not least, enabling the two-way data transfer between two models is the first important step on the way to a fully dynamical and chemical two-way coupling of the various model instances.In MMD (v1

The performance-competence interplay in the [V <i>until i>ADJ]-construction

DEFF Research Database (Denmark)

Jensen, Kim Ebensgaard

in which grammatical constructions are considered meaningful symbolic units on par with lexemes, in relation to the [V until ADJ]-construction, as seen in the following examples: (1) Meanwhile, grill onions until soft. (2) Stir frequently until fragrant. (3) Microwave milk on High 2 minutes or until warm...

I-V Curves from Photovoltaic Modules Deployed in Tucson

Science.gov (United States)

Kopp, Emily; Brooks, Adria; Lonij, Vincent; Cronin, Alex

2011-10-01

More than 30 Mega Watts of photo-voltaic (PV) modules are connected to the electric power grid in Tucson, AZ. However, predictions of PV system electrical yields are uncertain, in part because PV modules degrade at various rates (observed typically in the range 0% to 3 %/yr). We present I-V curves (PV output current as a function of PV output voltage) as a means to study PV module efficiency, de-ratings, and degradation. A student-made I-V curve tracer for 100-Watt modules will be described. We present I-V curves for several different PV technologies operated at an outdoor test yard, and we compare new modules to modules that have been operated in the field for 10 years.

The on-line coupled atmospheric chemistry model system MECO(n – Part 5: Expanding the Multi-Model-Driver (MMD v2.0 for 2-way data exchange including data interpolation via GRID (v1.0

Directory of Open Access Journals (Sweden)

A. Kerkweg

2018-03-01

Full Text Available As part of the Modular Earth Submodel System (MESSy, the Multi-Model-Driver (MMD v1.0 was developed to couple online the regional Consortium for Small-scale Modeling (COSMO model into a driving model, which can be either the regional COSMO model or the global European Centre Hamburg general circulation model (ECHAM (see Part 2 of the model documentation. The coupled system is called MECO(n, i.e., MESSy-fied ECHAM and COSMO models nested n times. In this article, which is part of the model documentation of the MECO(n system, the second generation of MMD is introduced. MMD comprises the message-passing infrastructure required for the parallel execution (multiple programme multiple data, MPMD of different models and the communication of the individual model instances, i.e. between the driving and the driven models. Initially, the MMD library was developed for a one-way coupling between the global chemistry–climate ECHAM/MESSy atmospheric chemistry (EMAC model and an arbitrary number of (optionally cascaded instances of the regional chemistry–climate model COSMO/MESSy. Thus, MMD (v1.0 provided only functions for unidirectional data transfer, i.e. from the larger-scale to the smaller-scale models.Soon, extended applications requiring data transfer from the small-scale model back to the larger-scale model became of interest. For instance, the original fields of the larger-scale model can directly be compared to the upscaled small-scale fields to analyse the improvements gained through the small-scale calculations, after the results are upscaled. Moreover, the fields originating from the two different models might be fed into the same diagnostic tool, e.g. the online calculation of the radiative forcing calculated consistently with the same radiation scheme. Last but not least, enabling the two-way data transfer between two models is the first important step on the way to a fully dynamical and chemical two-way coupling of the various model

Performance of b tagging algorithms in proton-proton collisions at 13 TeV with Phase 1 CMS detector

CERN Document Server

CMS Collaboration

2018-01-01

Many measurements as well as searches for new physics beyond the standard model at the LHC rely on the efficient identification of heavy flavour jets, i.e. jets containing b or c hadrons. In this Detector Performance Summary, the performance of these algorithms is presented, based on proton-proton collision data recorded by the CMS experiment at 13 TeV. Expected performance of the heavy flavour identification algorithms with the upgraded tracker detector are presented. Correction factors for a different performance in data and simulation are evaluated in 41.9 fb-1 of collision data collected in 2017. Finally, the reconstruction of observables relevant for heavy flavour identification in 2018 data is studied.

PERFORMANCE EVALUATION OF TYPE I MARINE SANITATION DEVICES

Science.gov (United States)

This performance test was designed to evaluate the effectiveness of two Type I Marine Sanitation Devices (MSDs): the Electro Scan Model EST 12, manufactured by Raritan Engineering Company, Inc., and the Thermopure-2, manufactured by Gross Mechanical Laboratories, Inc. Performance...

U.S.V.I. Soil Erodibility (Kffact)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — U.S.V.I. soil erodibility (Kffactor) - low values indicate low vulnerability to erosion, higher values mean higher susceptibility to runoff.

Effect of III-nitride polarization on V{sub OC} in p-i-n and MQW solar cells

Energy Technology Data Exchange (ETDEWEB)

Namkoong, Gon; Boland, Patrick; Foe, Kurniawan; Latimer, Kevin [Department of Electrical and Computer Engineering, Old Dominion University, Applied Research Center, 12050 Jefferson Avenue, Newport News, VA 23606 (United States); Bae, Si-Young; Shim, Jae-Phil; Lee, Dong-Seon [School of Information and Communications, Gwangju Institute of Science and Technology, 261 Cheomdan-gwagiro (Oryong-dong), Buk-gu, Gwangju 500-712 (Korea, Republic of); Jeon, Seong-Ran [Korea Photonics Technology Institute, 971-35, Wolchul-dong, Buk-gu, Gwangju, 500-779 (Korea, Republic of); Doolittle, W. Alan [School of Electrical and Computer Engineering, Georgia Institute of Technology, Atlanta, GA 30332 (United States)

2011-02-15

We performed detailed studies of the effect of polarization on III-nitride solar cells. Spontaneous and piezoelectric polarizations were assessed to determine their impacts upon the open circuit voltages (V{sub OC}) in p-i(InGaN)-n and multi-quantum well (MQW) solar cells. We found that the spontaneous polarization in Ga-polar p-i-n solar cells strongly modifies energy band structures and corresponding electric fields in a way that degrades V{sub OC} compared to non-polar p-i-n structures. In contrast, we found that piezoelectric polarization in Ga-polar MQW structures does not have a large influence on V{sub OC} compared to non-polar MQW structures. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

A mathematical model describing the glycemic response of diabetic patients to meal and i.v. infusion of insulin.

Science.gov (United States)

Fabietti, P G; Calabrese, G; Iorio, M; Bistoni, S; Brunetti, P; Sarti, E; Benedetti, M M

2001-10-01

Nine type 1 diabetic patients were studied for 24 hours. During this period they were given three calibrated meals. The glycemia was feedback-controlled by means of an artificial pancreas. The blood concentration of glucose and the infusion speed of the insulin were measured every minute. The experimental data referring to each of the three meals were used to estimate the parameters of a mathematical model suitable for describing the glycemic response of diabetic patients at meals and at the i.v. infusion of exogenous insulin. From the estimate a marked dispersion of the parameters was found, both interindividual and intraindividual. Nevertheless the models thus obtained seem to be usable for the synthesis of a feedback controller, especially in view of creating a portable artificial pancreas that now seems possible owing to the realization (so far experimental) of sufficiently reliable glucose concentration sensors.

The differential cross section and polarization for the elastic scattering of 2.9 MeV neutrons by Fe, Cu, I, Hg and Pb

International Nuclear Information System (INIS)

Galloway, R.B.; Waheed, A.

1979-01-01

Simultaneous measurements are presented of the angular dependence of polarization due to elastic scattering and of the elastic differential cross section for 2.9 MeV neutrons. The angular range covered is 20 0 to 160 0 for samples of Fe, Cu, I, Hg and Pb. The measurements are compared with the results of combining optical model and Hauser-Feshbach calculations. The optical model calculations were performed using 'global fit' parameters as well as with parameters suggested previously for the particular nuclei. The Hauser-Feshbach calculations were performed both with and without the level width fluctuation correction. It is clear that the calculations made without the level width fluctuation correction provide a better fit to the data for Fe, Cu, I and Hg and only for Pb does inclusion of the level width fluctuation correction provide a better fit. These optical model parameter sets are shown not to be very successful in fitting both differential cross-section and polarization data. The results of searches for the parameters which give the best fit for the data are presented. These parameter sets are compared with one another and with the results of 8 and 11 MeV neutron scattering studies for trends in the variation of the parameters. (Auth.)

Independent V and V for Safety Grade I and C System

International Nuclear Information System (INIS)

Lee, Jang Soo; Kwon, Kee Choon; Lee, Dong Young

2010-08-01

Through KNICS and Nu-Tech 2012, a MMIS(Man-Machine Interface System) package for nuclear plants was localized and is expected to be applied to SUN 1,2 plants. This study is aimed to support the application of the MMIS package including the following technologies that meet strengthened regulation requirements and enhanced utility's performance requirements to nuclear plants. - Dedication to real time operating system for safety-grade computers - V and V of the broadband communication network for safety information - Independent V and V for application of programmable logic controllers to nuclear plants - Development strategy for an integrated SW development tool for control devices

Characterization and Modeling I(V of the Gate Schottky Structures HEMTs Ni/Au/AlInN/GaN

Directory of Open Access Journals (Sweden)

N. Benyahya

2014-05-01

Full Text Available In this paper, we have studied the Schottky contact of Ni/Au/AlInN/GaN HEMTs. The current–voltage Igs (Vgs of Ni/Au/AlInN/GaN structures were investigated at room temperature. The electrical parameters such as ideality factor (2.3, barrier height (0.72 eV and series resistance (33 W were evaluated from I(V data, the threshold voltage (-2.42 V, the 2D gas density (1.35 ´ 1013 cm-2 and barrier height (0.94 eV were evaluated from C(V data.

Les Houches 2015: Physics at TeV Colliders Standard Model Working Group Report

Energy Technology Data Exchange (ETDEWEB)

Andersen, J.R.; et al.

2016-05-16

This Report summarizes the proceedings of the 2015 Les Houches workshop on Physics at TeV Colliders. Session 1 dealt with (I) new developments relevant for high precision Standard Model calculations, (II) the new PDF4LHC parton distributions, (III) issues in the theoretical description of the production of Standard Model Higgs bosons and how to relate experimental measurements, (IV) a host of phenomenological studies essential for comparing LHC data from Run I with theoretical predictions and projections for future measurements in Run II, and (V) new developments in Monte Carlo event generators.

Les Houches 2015: Physics at TeV Colliders Standard Model Working Group Report

CERN Document Server

Andersen, J.R.; Becker, K.; Bell, M.; Bellm, J.; Bendavid, J.; Bothmann, E.; Boughezal, R.; Butterworth, J.; Carrazza, S.; Chiesa, M.; Cieri, L.; Ciulli, V.; Denner, A.; Duehrssen-Debling, M.; Falmagne, G.; Forte, S.; Francavilla, P.; Frederix, R.; Freytsis, M.; Gao, J.; Gras, P.; Grazzini, M.; Greiner, N.; Grellscheid, D.; Heinrich, G.; Hesketh, G.; Hoche, S.; Hofer, L.; Hou, T.J.; Huss, A.; Huston, J.; Isaacson, J.; Jueid, A.; Kallweit, S.; Kar, D.; Kassabov, Z.; Konstantinides, V.; Krauss, F.; Kuttimalai, S.; Lazapoulos, A.; Lenzi, P.; Li, Y.; Lindert, J.M.; Liu, X.; Luisoni, G.; Lonnblad, L.; Maierhofer, P.; Maître, D.; Marini, A.C.; Montagna, G.; Moretti, M.; Nadolsky, P.M.; Nail, G.; Napoletano, D.; Nicrosini, O.; Oleari, C.; Pagani, D.; Pandini, C.; Perrozzi, L.; Petriello, F.; Piccinini, F.; Platzer, S.; Pogrebnyak, I.; Pozzorini, S.; Prestel, S.; Reuschle, C.; Rojo, J.; Russo, L.; Schichtel, P.; Schonherr, M.; Schumann, S.; Siodmok, A.; Skands, P.; Soper, D.; Soyez, G.; Sun, P.; Tackmann, F.J.; Tackmann, K.; Takasugi, E.; Thaler, J.; Uccirati, S.; Utku, U.; Viliani, L.; Vryonidou, E.; Wang, B.T.; Waugh, B.; Weber, M.A.; Williams, C.; Winter, J.; Xie, K.P.; Yuan, C.P.; Yuan, F.; Zapp, K.; Zaro, M.

2016-01-01

This Report summarizes the proceedings of the 2015 Les Houches workshop on Physics at TeV Colliders. Session 1 dealt with (I) new developments relevant for high precision Standard Model calculations, (II) the new PDF4LHC parton distributions, (III) issues in the theoretical description of the production of Standard Model Higgs bosons and how to relate experimental measurements, (IV) a host of phenomenological studies essential for comparing LHC data from Run I with theoretical predictions and projections for future measurements in Run II, and (V) new developments in Monte Carlo event generators.

An accurate mobility model for the I-V characteristics of n-channel enhancement-mode MOSFETs with single-channel boron implantation

International Nuclear Information System (INIS)

Chingyuan Wu; Yeongwen Daih

1985-01-01

In this paper an analytical mobility model is developed for the I-V characteristics of n-channel enhancement-mode MOSFETs, in which the effects of the two-dimensional electric fields in the surface inversion channel and the parasitic resistances due to contact and interconnection are included. Most importantly, the developed mobility model easily takes the device structure and process into consideration. In order to demonstrate the capabilities of the developed model, the structure- and process-oriented parameters in the present mobility model are calculated explicitly for an n-channel enhancement-mode MOSFET with single-channel boron implantation. Moreover, n-channel MOSFETs with different channel lengths fabricated in a production line by using a set of test keys have been characterized and the measured mobilities have been compared to the model. Excellent agreement has been obtained for all ranges of the fabricated channel lengths, which strongly support the accuracy of the model. (author)

The iFlow modelling framework v2.4: a modular idealized process-based model for flow and transport in estuaries

Science.gov (United States)

Dijkstra, Yoeri M.; Brouwer, Ronald L.; Schuttelaars, Henk M.; Schramkowski, George P.

2017-07-01

The iFlow modelling framework is a width-averaged model for the systematic analysis of the water motion and sediment transport processes in estuaries and tidal rivers. The distinctive solution method, a mathematical perturbation method, used in the model allows for identification of the effect of individual physical processes on the water motion and sediment transport and study of the sensitivity of these processes to model parameters. This distinction between processes provides a unique tool for interpreting and explaining hydrodynamic interactions and sediment trapping. iFlow also includes a large number of options to configure the model geometry and multiple choices of turbulence and salinity models. Additionally, the model contains auxiliary components, including one that facilitates easy and fast sensitivity studies. iFlow has a modular structure, which makes it easy to include, exclude or change individual model components, called modules. Depending on the required functionality for the application at hand, modules can be selected to construct anything from very simple quasi-linear models to rather complex models involving multiple non-linear interactions. This way, the model complexity can be adjusted to the application. Once the modules containing the required functionality are selected, the underlying model structure automatically ensures modules are called in the correct order. The model inserts iteration loops over groups of modules that are mutually dependent. iFlow also ensures a smooth coupling of modules using analytical and numerical solution methods. This way the model combines the speed and accuracy of analytical solutions with the versatility of numerical solution methods. In this paper we present the modular structure, solution method and two examples of the use of iFlow. In the examples we present two case studies, of the Yangtze and Scheldt rivers, demonstrating how iFlow facilitates the analysis of model results, the understanding of the

Independent V and V for Safety Grade I and C System

Energy Technology Data Exchange (ETDEWEB)

Lee, Jang Soo; Kwon, Kee Choon; Lee, Dong Young [KAERI, Daejeon (Korea, Republic of)

2010-08-15

Through KNICS and Nu-Tech 2012, a MMIS(Man-Machine Interface System) package for nuclear plants was localized and is expected to be applied to SUN 1,2 plants. This study is aimed to support the application of the MMIS package including the following technologies that meet strengthened regulation requirements and enhanced utility's performance requirements to nuclear plants. - Dedication to real time operating system for safety-grade computers - V and V of the broadband communication network for safety information - Independent V and V for application of programmable logic controllers to nuclear plants - Development strategy for an integrated SW development tool for control devices

Phosphorene as a Superior Gas Sensor: Selective Adsorption and Distinct I-V Response.

Science.gov (United States)

Kou, Liangzhi; Frauenheim, Thomas; Chen, Changfeng

2014-08-07

Recent reports on the fabrication of phosphorene, that is, mono- or few-layer black phosphorus, have raised exciting prospects of an outstanding two-dimensional (2D) material that exhibits excellent properties for nanodevice applications. Here, we study by first-principles calculations the adsorption of CO, CO2, NH3, NO, and NO2 gas molecules on a monolayer phosphorene. Our results predict superior sensing performance of phosphorene that rivals or even surpasses that of other 2D materials such as graphene and MoS2. We determine the optimal adsorption positions of these molecules on the phosphorene and identify molecular doping, that is, charge transfer between the molecules and phosphorene, as the driving mechanism for the high adsorption strength. We further calculated the current-voltage (I-V) relation using the nonequilibrium Green's function (NEGF) formalism. The transport features show large (1-2 orders of magnitude) anisotropy along different (armchair or zigzag) directions, which is consistent with the anisotropic electronic band structure of phosphorene. Remarkably, the I-V relation exhibits distinct responses with a marked change of the I-V relation along either the armchair or the zigzag directions depending on the type of molecules. Such selectivity and sensitivity to adsorption makes phosphorene a superior gas sensor that promises wide-ranging applications.

Performance i Krise

DEFF Research Database (Denmark)

Nørreklit, Hanne

Scorecard got our management team on the same page, and has played an important role in our success thus far( Dieter Zetsche, President and CEO udtaler)."  Den 1. maj 2009 måtte Chrysler indgive sin konkursbegæring. Det er dog ikke kun praksis, der har advokeret nye målemodeller. Mange af de nye...... ikke har kunnet anticipere eller forhindre krisen, men har de mon ligefrem bidraget til krisen? Det konkluderes, at der i modellerne har været indbygget en logik, der har bidraget til en øget risiko og sårbarhed af virksomhederne. Slutteligt diskuteres i hvilken udstrækning, vi som forskere kan og skal...

Device and performance parameters of Cu(In,Ga)(Se,S)2-based solar cells with varying i-ZnO layer thickness

International Nuclear Information System (INIS)

Macabebe, E.Q.B.; Sheppard, C.J.; Dyk, E.E. van

2009-01-01

In pursuit of low-cost and highly efficient thin film solar cells, Cu(In,Ga)(Se,S) 2 /CdS/i-ZnO/ZnO:Al (CIGSS) solar cells were fabricated using a two-step process. The thickness of i-ZnO layer was varied from 0 to 454 nm. The current density-voltage (J-V) characteristics of the devices were measured, and the device and performance parameters of the solar cells were obtained from the J-V curves to analyze the effect of varying i-ZnO layer thickness. The device parameters were determined using a parameter extraction method that utilized particle swarm optimization. The method is a curve-fitting routine that employed the two-diode model. The J-V curves of the solar cells were fitted with the model and the parameters were determined. Results show that as the thickness of i-ZnO was increased, the average efficiency and the fill factor (FF) of the solar cells increase. Device parameters reveal that although the series resistance increased with thicker i-ZnO layer, the solar cells absorbed more photons resulting in higher short-circuit current density (J sc ) and, consequently, higher photo-generated current density (J L ). For solar cells with 303-454 nm-thick i-ZnO layer, the best devices achieved efficiency between 15.24% and 15.73% and the fill factor varied between 0.65 and 0.67.

Assessment of realizability constraints in v2-f turbulence models

International Nuclear Information System (INIS)

Sveningsson, A.; Davidson, L.

2004-01-01

The use of the realizability constraint in v 2 -f turbulence models is assessed by computing a stator vane passage flow. In this flow the stagnation region is large and it is shown that the time scale bound suggested by [Int. J. Heat Fluid Flow 17 (1995) 89] is well suited to prevent unphysical growth of turbulence kinetic energy. However, this constraint causes numerical instabilities when used in the equation for the relaxation parameter, f. It is also shown that the standard use of the realizability constraint in the v 2 -f model is inconsistent and some modifications are suggested. These changes of the v 2 -f model are examined and shown to have negligible effect on the overall performance of the v 2 -f model. In this work two different versions of the v 2 -f model are investigated and the results obtained are compared with experimental data. The model on a form similar to that originally suggested by Durbin (e.g. [AIAA J. 33 (1995) 659]) produced the overall best agreement with stator vane heat transfer data

An ecological vegetation-activated sludge process (V-ASP) for decentralized wastewater treatment: system development, treatment performance, and mathematical modeling.

Science.gov (United States)

Yuan, Jiajia; Dong, Wenyi; Sun, Feiyun; Li, Pu; Zhao, Ke

2016-05-01

An environment-friendly decentralized wastewater treatment process that is comprised of activated sludge process (ASP) and wetland vegetation, named as vegetation-activated sludge process (V-ASP), was developed for decentralized wastewater treatment. The long-term experimental results evidenced that the vegetation sequencing batch reactor (V-SBR) process had consistently stable higher removal efficiencies of organic substances and nutrients from domestic wastewater compared with traditional sequencing batch reactor (SBR). The vegetation allocated into V-SBR system could not only remove nutrients through its vegetation transpiration ratio but also provide great surface area for microorganism activity enhancement. This high vegetation transpiration ratio enhanced nutrients removal effectiveness from wastewater mainly by flux enhancement, oxygen and substrate transportation acceleration, and vegetation respiration stimulation. A mathematical model based on ASM2d was successfully established by involving the specific function of vegetation to simulate system performance. The simulation results on the influence of operational parameters on V-ASP treatment effectiveness demonstrated that V-SBR had a high resistance to seasonal temperature fluctuations and influent loading shocking.

ATLAS I/O Performance Optimization in As-Deployed Environments

CERN Document Server

Maier, Thomas; The ATLAS collaboration; Bhimji, Wahid; Elmsheuser, Johannes; van Gemmeren, Peter; Malon, David; Krumnack, Nils

2015-01-01

I/O is a fundamental determinant in the overall performance of physics analysis and other data-intensive scientific computing. It is, further, crucial to effective resource delivery by the facilities and infrastructure that support data-intensive science. To understand I/O performance, clean measurements in controlled environments are essential, but effective optimization requires as well an understanding of the complicated realities of as-deployed environments. These include a spectrum of local and wide-area data delivery and resilience models, heterogeneous storage systems, matches and mismatches between data organization and access patterns, multi-user considerations that may help or hinder individual job performance, and more. The ATLAS experiment has organized an interdisciplinary working group of I/O, persistence, analysis framework, distributed infrastructure, site deployment, and external experts to understand and improve I/O performance in preparation for Run 2 of the Large Hadron Collider. The adopt...

Measurement of 14 MeV neutron cross section of {sup 129}I with foil activation method

Energy Technology Data Exchange (ETDEWEB)

Murata, Isao; Nakano, Daisuke; Takahashi, Akito [Osaka Univ., Suita (Japan). Faculty of Engineering

1997-03-01

The {sup 129}I, which is one of the most famous fission products (FPs), is of very important concern from the standpoint of waste transmutation due to its extremely long half life. The accurate reaction cross section data of {sup 129}I induced by 14 MeV neutrons are indispensable when evaluating the performance to transmute it in a fusion reactor. However, there was no available experimental data reported until now. We measured 14 MeV neutron induced reaction cross sections of {sup 129}I to give the reference cross section data for evaluation of transmutation performance and nuclear data, using OKTAVIAN facility of Osaka university, Japan. Since the available amount of {sup 129}I as a sample is quite small, probably less than 1 mg, the foil activation method was adopted in the measurement. The sample was a sealed source of {sup 129}I and the {gamma}-rays from the irradiated sample were measured with a Hp-Ge detector. Several {gamma}-rays peaks which could be expected to be caused by two nuclear reactions of {sup 129}I(n,2n) and {sup 129}I(n,{gamma}) were observed. We confirmed that these peaks corresponded to those of {sup 128}I and {sup 130}I through ascertaining each energy and half life. From the measurement, the cross section of {sup 129}I(n,2n) and the effective production cross section of {sup 130}I produced by the {sup 129}I(n,{gamma}){sup 130}I reaction including the contribution of {sup 129}I(n,{gamma}){sup 130m}I reaction, that were estimated to be 1.1{+-}0.1 b and 0.032{+-}0.003 b, respectively at 14.8 MeV, were obtained with an acceptable accuracy of about 10 %, though the errors caused by the uncertainty of {gamma} decay scheme data still existed. The measured cross sections were compared with the evaluated nuclear data of JENDL-3.2 and ENDF/B-VI. For the {sup 129}I(n,2n) reaction, the evaluations overestimate the cross section by 30-40 %, while for the {sup 129}I(n,{gamma}) reaction, the evaluations underestimate by at least one order of magnitude

78 FR 23489 - Safety Zone; V.I. Carnival Finale, St. Thomas Harbor; St. Thomas, U.S.V.I.

Science.gov (United States)

2013-04-19

... waters of St. Thomas Harbor in St. Thomas, U.S. Virgin Islands during the V.I. Carnival Finale, a... through Friday, except Federal holidays. FOR FURTHER INFORMATION CONTACT: If you have questions on this... event. The event will be held on the waters of St. Thomas Harbor, St. Thomas, U. S. Virgin Islands...

The iFlow modelling framework v2.4: a modular idealized process-based model for flow and transport in estuaries

Directory of Open Access Journals (Sweden)

Y. M. Dijkstra

2017-07-01

Full Text Available The iFlow modelling framework is a width-averaged model for the systematic analysis of the water motion and sediment transport processes in estuaries and tidal rivers. The distinctive solution method, a mathematical perturbation method, used in the model allows for identification of the effect of individual physical processes on the water motion and sediment transport and study of the sensitivity of these processes to model parameters. This distinction between processes provides a unique tool for interpreting and explaining hydrodynamic interactions and sediment trapping. iFlow also includes a large number of options to configure the model geometry and multiple choices of turbulence and salinity models. Additionally, the model contains auxiliary components, including one that facilitates easy and fast sensitivity studies. iFlow has a modular structure, which makes it easy to include, exclude or change individual model components, called modules. Depending on the required functionality for the application at hand, modules can be selected to construct anything from very simple quasi-linear models to rather complex models involving multiple non-linear interactions. This way, the model complexity can be adjusted to the application. Once the modules containing the required functionality are selected, the underlying model structure automatically ensures modules are called in the correct order. The model inserts iteration loops over groups of modules that are mutually dependent. iFlow also ensures a smooth coupling of modules using analytical and numerical solution methods. This way the model combines the speed and accuracy of analytical solutions with the versatility of numerical solution methods. In this paper we present the modular structure, solution method and two examples of the use of iFlow. In the examples we present two case studies, of the Yangtze and Scheldt rivers, demonstrating how iFlow facilitates the analysis of model results, the

Device and performance parameters of Cu(In,Ga)(Se,S){sub 2}-based solar cells with varying i-ZnO layer thickness

Energy Technology Data Exchange (ETDEWEB)

Macabebe, E.Q.B. [Department of Physics, Nelson Mandela Metropolitan University, P.O. Box 77000, Port Elizabeth 6031 (South Africa); Sheppard, C.J. [Department of Physics, University of Johannesburg, P.O. Box 524, Auckland Park 2006 (South Africa); Dyk, E.E. van, E-mail: ernest.vandyk@nmmu.ac.z [Department of Physics, Nelson Mandela Metropolitan University, P.O. Box 77000, Port Elizabeth 6031 (South Africa)

2009-12-01

In pursuit of low-cost and highly efficient thin film solar cells, Cu(In,Ga)(Se,S){sub 2}/CdS/i-ZnO/ZnO:Al (CIGSS) solar cells were fabricated using a two-step process. The thickness of i-ZnO layer was varied from 0 to 454 nm. The current density-voltage (J-V) characteristics of the devices were measured, and the device and performance parameters of the solar cells were obtained from the J-V curves to analyze the effect of varying i-ZnO layer thickness. The device parameters were determined using a parameter extraction method that utilized particle swarm optimization. The method is a curve-fitting routine that employed the two-diode model. The J-V curves of the solar cells were fitted with the model and the parameters were determined. Results show that as the thickness of i-ZnO was increased, the average efficiency and the fill factor (FF) of the solar cells increase. Device parameters reveal that although the series resistance increased with thicker i-ZnO layer, the solar cells absorbed more photons resulting in higher short-circuit current density (J{sub sc}) and, consequently, higher photo-generated current density (J{sub L}). For solar cells with 303-454 nm-thick i-ZnO layer, the best devices achieved efficiency between 15.24% and 15.73% and the fill factor varied between 0.65 and 0.67.

NATO Reference Mobility Model. Edition I. Users Guide. Volume I

Science.gov (United States)

1979-10-01

C TOTAL ERAKING FCRCE - SCIL /SLOPE/VEHICLE C --- ----.----------- C 275 R-2WJ58# VCLUIJE I PAGE A-103 APPEND-IX A - LISTING CF O.CFAt’ NRtPM C 1...sGCW vN1RAV ,SFTYPC 9TBF I- c r-------------------------~e e C tPAXIMUP BRAKING FCRCE * SCIL /SL OP E/V ENICLE/ DRIVER C --------------------- C C 1. VAR...CONTINUE GO TC 2160 ,ýObO IFl IST ,NE, 21 GC TG 2110i 317 R-20358, VOLUME I PAGE A-145 APPENDIX A - LISTING CF FRGG/iAM NAMM C 8. COARSE GRAINED SCIL IF

VPLIV STRESA NA DELO IN ZDRAVJE REŠEVALCEV V NUJNI MEDICINSKI POMOČI

OpenAIRE

Javernik, Tanja

2012-01-01

Izhodišča: V diplomskem delu smo izpostavili stres, ki je neizogiben del življenja v nujni medicinski pomoči. Reševalci v nujni medicinski pomoči se dnevno srečujejo z različnimi obremenjujočimi situacijami, ki lahko vplivajo na počutje, delovanje organizma, psihično ravnovesje, imunost in zdravje posameznika. Z raziskavo smo ugotavljali, v kolikšni meri so reševalci v službi nujne medicinske pomoči pri svojem delu izpostavljeni stresnim situacijam in obremenitvam kot so: neučakani pacient...

An investigation of characteristics parameters of Ag/p-Si Schottky diodes based on I-V-T and C-V-T measurements

International Nuclear Information System (INIS)

Selcuk, A.B.

2004-01-01

The current-voltage (I-V) measurements on Ag/p-Si Schottky barrier diodes in the temperature range 125-300 K were carried out. The experimental values of n and Φ b 0 were determined from intercepts and slopes of the forward bias In I-V plot at each temperature. The Φ b 0 and n determined from semilog-forwaid I- V plots were found to be a strong function of temperature. The ideality factor n was found to increase, while the Φ b 0 decrease with decreasing temperature. The flat-band barrier height Φ b f and series resistance R s are also determined from the I-V measurements. Furthermore, the diffusion potential V D , experimental carrier doping density N A , Fermi level E F and barrier height Φ C V are determined from the C- V measurements. It is shown that the values of R s estimated from Cheung's method were strongly temperature dependent decreased with increasing temperature

Cannes'i võidusilmapiir püsib udune / Jaak Lõhmus

Index Scriptorium Estoniae

Lõhmus, Jaak

2008-01-01

Cannes'i 61. filmifestivalist, lähemalt võistlusprogrammi sotsiaalse suunitlusega filmidest : Clint Eastwoodi "Äravahetamine" ("Changeling") ja Jean-Pierre ning Luc Dardenne'i "Lorna vaikimine" ("Le silence de Lorna")

Stability and Performance of CsPbI2Br Thin Films and Solar Cell Devices.

Science.gov (United States)

Mariotti, Silvia; Hutter, Oliver S; Phillips, Laurie J; Yates, Peter J; Kundu, Biswajit; Durose, Ken

2018-01-31

In this manuscript, the inorganic perovskite CsPbI 2 Br is investigated as a photovoltaic material that offers higher stability than the organic-inorganic hybrid perovskite materials. It is demonstrated that CsPbI 2 Br does not irreversibly degrade to its component salts as in the case of methylammonium lead iodide but instead is induced (by water vapor) to transform from its metastable brown cubic (1.92 eV band gap) phase to a yellow phase having a higher band gap (2.85 eV). This is easily reversed by heating to 350 °C in a dry environment. Similarly, exposure of unencapsulated photovoltaic devices to water vapor causes current (J SC ) loss as the absorber transforms to its more transparent (yellow) form, but this is also reversible by moderate heating, with over 100% recovery of the original device performance. NMR and thermal analysis show that the high band gap yellow phase does not contain detectable levels of water, implying that water induces the transformation but is not incorporated as a major component. Performances of devices with best efficiencies of 9.08% (V OC = 1.05 V, J SC = 12.7 mA cm -2 and FF = 68.4%) using a device structure comprising glass/ITO/c-TiO 2 /CsPbI 2 Br/Spiro-OMeTAD/Au are presented, and further results demonstrating the dependence of the performance on the preparation temperature of the solution processed CsPbI 2 Br films are shown. We conclude that encapsulation of CsPbI 2 Br to exclude water vapor should be sufficient to stabilize the cubic brown phase, making the material of interest for use in practical PV devices.

Performance study of a PET scanner based on monolithic scintillators for different DoI-dependent methods

International Nuclear Information System (INIS)

Preziosi, E.; Sánchez, S.; González, A.J.; Rodriguez-Alvarez, M.J.; González-Montoro, A.; Moliner, L.; Benlloch, J.M.; Pani, R.; Borrazzo, C.; Bettiol, M.

2016-01-01

One of the technical objectives of the MindView project is developing a brain-dedicated PET insert based on monolithic scintillation crystals. It will be inserted in MRI systems with the purpose to obtain simultaneous PET and MRI brain images. High sensitivity, high image quality performance and accurate detection of the Depth-of-Interaction (DoI) of the 511keV photons are required. We have developed a DoI estimation method, dedicated to monolithic scintillators, allowing continuous DoI estimation and a DoI-dependent algorithm for the estimation of the photon planar impact position, able to improve the single module imaging capabilities. In this work, through experimental measurements, the proposed methods have been used for the estimation of the impact positions within the monolithic crystal block. We have evaluated the PET system performance following the NEMA NU 4-2008 protocol by reconstructing the images using the STIR 3D platform. The results obtained with two different methods, providing discrete and continuous DoI information, are compared with those obtained from an algorithm without DoI capabilities and with the ideal response of the detector. The proposed DoI-dependent imaging methods show clear improvements in the spatial resolution (FWHM) of reconstructed images, allowing to obtain values from 2mm (at the center FoV) to 3mm (at the FoV edges).

An analytical turn-on power loss model for 650-V GaN eHEMTs

DEFF Research Database (Denmark)

Shen, Yanfeng; Wang, Huai; Shen, Zhan

2018-01-01

This paper proposes an improved analytical turn-on power loss model for 650-V GaN eHEMTs. The static characteristics, i.e., the parasitic capacitances and transconductance, are firstly modeled. Then the turn-on process is divided into multiple stages and analyzed in detail; as results, the time-d......-domain solutions to the drain-source voltage and drain current are obtained. Finally, double-pulse tests are conducted to verify the proposed power loss model. This analytical model enables an accurate and fast switching behavior characterization and power loss prediction.......This paper proposes an improved analytical turn-on power loss model for 650-V GaN eHEMTs. The static characteristics, i.e., the parasitic capacitances and transconductance, are firstly modeled. Then the turn-on process is divided into multiple stages and analyzed in detail; as results, the time...

K-RasV14I recapitulates Noonan syndrome in mice

Science.gov (United States)

Hernández-Porras, Isabel; Fabbiano, Salvatore; Schuhmacher, Alberto J.; Aicher, Alexandra; Cañamero, Marta; Cámara, Juan Antonio; Cussó, Lorena; Desco, Manuel; Heeschen, Christopher; Mulero, Francisca; Bustelo, Xosé R.; Guerra, Carmen; Barbacid, Mariano

2014-01-01

Noonan syndrome (NS) is an autosomal dominant genetic disorder characterized by short stature, craniofacial dysmorphism, and congenital heart defects. NS also is associated with a risk for developing myeloproliferative disorders (MPD), including juvenile myelomonocytic leukemia (JMML). Mutations responsible for NS occur in at least 11 different loci including KRAS. Here we describe a mouse model for NS induced by K-RasV14I, a recurrent KRAS mutation in NS patients. K-RasV14I–mutant mice displayed multiple NS-associated developmental defects such as growth delay, craniofacial dysmorphia, cardiac defects, and hematologic abnormalities including a severe form of MPD that resembles human JMML. Homozygous animals had perinatal lethality whose penetrance varied with genetic background. Exposure of pregnant mothers to a MEK inhibitor rescued perinatal lethality and prevented craniofacial dysmorphia and cardiac defects. However, Mek inhibition was not sufficient to correct these defects when mice were treated after weaning. Interestingly, Mek inhibition did not correct the neoplastic MPD characteristic of these mutant mice, regardless of the timing at which the mice were treated, thus suggesting that MPD is driven by additional signaling pathways. These genetically engineered K-RasV14I–mutant mice offer an experimental tool for studying the molecular mechanisms underlying the clinical manifestations of NS. Perhaps more importantly, they should be useful as a preclinical model to test new therapies aimed at preventing or ameliorating those deficits associated with this syndrome. PMID:25359213

Jump ergometer in sport performance testing Výskokový ergometr v diagnostice sportovní výkonnosti

Directory of Open Access Journals (Sweden)

Dušan Hamar

2005-02-01

Full Text Available The papers deals with the application of the jump ergometer in the evaluation of neuromuscular performance. Altogether 288 athletes of different sport specializations (mean age 18.9 ± 6.4 years, height 172.2 ± 4.3 cm, and weight 62.4 ± 4.9 kg underwent various tests on the jump ergometer, such as 10-, 60-, and 90-second repeated jumps, squat and countermovement jumps without and with an additional load, and drop jumps from different heights with and without bending the knees. The diagnostic system FiTRO Jumper consisting of a special contact switch mattress connected by means of an interface to a computer was used. Jump parameters (power in the active phase of take off and height of the jump were calculated from the flight and contact times. Results showed that the system may be applied for the assessment of explosive power of the lower extremities, strength endurance of the lower extremities, utilization of the stretch shortening cycle, distribution of fast twitch fibers, optimal drop jump height for plyometric training, and training effects, namely in sports such as basketball, volleyball, soccer, tennis, gymnastics, rock and roll, figure skating, track and field, ski jumping, weight lifting, etc. Práce poukazuje na možnosti uplatnění výskokového ergometru při posuzovaní odrazových schopností dolních končetin. Celkem 288 sportovců s různou specializací (průměrný věk 18,9 ± 6,4 let, výška 172,2 ± 4,3 cm, hmotnost 62,4 ± 4,9 kg absolvovalo testy na výskokovém ergometru, a to 10, 60 a 90sekundový test opakovaných snožných výskoků, výskoky bez a s protipohybem s hmotností vlastního těla, resp. s dodatečnou váhou, jakož i seskoky z různych výšek do rovných, resp. pokrčených dolních končetin. Parametry odrazových schopností (výkon v aktivní fázi odrazu a výška výskoku byly registrovány pomocí diagnostického systému FiTRO Jumper sestávajícího z odrazové doby napojené prost

High performance parallel I/O

CERN Document Server

Prabhat

2014-01-01

Gain Critical Insight into the Parallel I/O EcosystemParallel I/O is an integral component of modern high performance computing (HPC), especially in storing and processing very large datasets to facilitate scientific discovery. Revealing the state of the art in this field, High Performance Parallel I/O draws on insights from leading practitioners, researchers, software architects, developers, and scientists who shed light on the parallel I/O ecosystem.The first part of the book explains how large-scale HPC facilities scope, configure, and operate systems, with an emphasis on choices of I/O har

Association of the IL4R single-nucleotide polymorphism I50V with recurrent spontaneous abortion (RSA).

Science.gov (United States)

Tavasolian, Fataneh; Abdollahi, Elham; Samadi, Morteza

2014-07-01

Recurrent spontaneous abortion (RSA) is defined as three or more consecutive abortions before the 20th week of gestation. There is increasing evidence to support an immunological mechanism for the occurrence of RSA. The purpose of our study was to examine whether single-nucleotide polymorphisms (SNPs) of the interleukin-4 receptor gene IL4R influence susceptibility to, recurrent spontaneous abortion. This is a case-control study. We recruited 200 patients with RSA (case group) using established diagnostic criteria and 200, normal individuals (control group) at the fertility and infertility center in Yazd city and Isfahan city during 2012 to 2013. We screened the I50V variant in IL-4R in patients and controls by PCR-RFLF method, and we performed an association analysis between I50V variant and RSA.the data was analyzed by spss 16 software using Chi-square test. No differences in the genotype and allele frequencies of the I50V SNPs were identified between patients with RSA and healthy controls. The frequency of SNP in IL-4 receptor (I50V) in patients with recurrent spontaneous abortion did not differ significantly compared with the control group. Analysis of IL4R SNP haplotypes or complex alleles suggested no dominant protection in patients with RSA.

Scattering effects on the performance of carbon nanotube field effect transistor in a compact model

Science.gov (United States)

Hamieh, S. D.; Desgreys, P.; Naviner, J. F.

2010-01-01

Carbon nanotube field-effect transistors (CNTFET) are being extensively studied as possible successors to CMOS. Device simulators have been developed to estimate their performance in sub-10-nm and device structures have been fabricated. In this work, a new compact model of single-walled semiconducting CNTFET is proposed implementing the calculation of energy conduction sub-band minima and the treatment of scattering effects through energy shift in CNTFET. The developed model has been used to simulate I-V characteristics using VHDL-AMS simulator.

BDG kaupleb Cannes'i võidufilmi Eesti levisse / Tiit Tuumalu

Index Scriptorium Estoniae

Tuumalu, Tiit, 1971-

2004-01-01

Dokumentalist Michael Moore võitis 57. Cannes' i filmifestivalil oma filmiga "Fahrenheit 9/11" Kuldse Palmioksa. Eestis saab näha ka tema varasemaid filme. Soome televisioon näitab kaht M. Moore'i autorsusega telesarja

40 CFR 51.352 - Basic I/M performance standard.

Science.gov (United States)

2010-07-01

... following model I/M program inputs and local characteristics, such as vehicle mix and local fuel controls... current version of the EPA mobile source emission model, and shall meet the minimum performance standard... specified in 40 CFR part 85, subpart W. (8) Emission control device inspections. None. (9) Stringency. A 20...

I-V curves of Y-Ba-Cu-O microbridges in the flux flow regime

International Nuclear Information System (INIS)

Kalisky, B.; Wolfus, Y.; Yeshurun, Y.; Koren, G.; Huebener, R.P.

2004-01-01

We report on measurements of I-V curves in microbridges of thin Y-Ba-Cu-O films of different thickness, in the presence of external magnetic fields up to 6 T. A discontinuity is observed at a critical voltage, V*, in the flux flow regime, reflecting an electronic instability, as predicted by Larkin and Ovchinnikov (LO), and in agreement with results reported by Doettinger et al. [Phys. Rev. Let. 73 (1994) 1691]. The critical voltage, V*, and the flux flow resistance, R 0 , in the limit V→0, are calculated by fitting the data to the LO model. We find that the vortex critical velocity, v*, at the instability, derived from V*, decreases with magnetic field and film thickness. These results, not predicted by the LO theory, reflect the dependence of the (spatially averaged) quasiparticle energy relaxation rate on magnetic field and film thickness

Prezident ne provozglasil zakon o tserkvahh i prihodahh... i provozglasil popravki v zakon o teleradioveshtshanii

Index Scriptorium Estoniae

2002-01-01

President Arnold Rüütel jättis välja kuulutamata Kirikute ja koguduste seaduse ja kuulutas välja Ringhäälinguseaduse muutmise seaduse. Pealk. ajalehes Sillamjaeskii Vestnik (2002/Jan/8): "Prezident Estonii Arnold Rüütel reshil ne provozglashat zakon o tserkvahh i prihodahh", lk. 2

Værktøjskasse til Agil Stage-Gate®: Ny model for udviklingsprojekter i mellemstore virksomheder

DEFF Research Database (Denmark)

Vedsmand, Tomas; Edwards, Kasper; Hvidt, Nicoline

Denne værktøjskasse er et tillæg for guiden Agil Stage-Gate: Ny model for udviklingsprojekter i mellemstore virksomheder. (http://dx.doi.org/10.11581/DTU:00000028)......Denne værktøjskasse er et tillæg for guiden Agil Stage-Gate: Ny model for udviklingsprojekter i mellemstore virksomheder. (http://dx.doi.org/10.11581/DTU:00000028)...

Evaluating Models of Human Performance: Safety-Critical Systems Applications

Science.gov (United States)

Feary, Michael S.

2012-01-01

This presentation is part of panel discussion on Evaluating Models of Human Performance. The purpose of this panel is to discuss the increasing use of models in the world today and specifically focus on how to describe and evaluate models of human performance. My presentation will focus on discussions of generating distributions of performance, and the evaluation of different strategies for humans performing tasks with mixed initiative (Human-Automation) systems. I will also discuss issues with how to provide Human Performance modeling data to support decisions on acceptability and tradeoffs in the design of safety critical systems. I will conclude with challenges for the future.

Absolute cross sections for the multielectron processes in 15 keV I10++rare gas collisions

International Nuclear Information System (INIS)

Nakamura, N.; Currell, F.J.; Danjo, A.; Kimura, M.; Matsumoto, A.; Ohtani, S.; Sakaue, H.A.; Sakurai, M.; Tawara, H.; Watanabe, H.; Yamada, I.; Yoshino, M.

1995-01-01

We have experimentally determined the absolute cross sections for total charge transfer (σ q ), j electron transfer (σ j q ), i electron capture (σ q,q-i ) and each reaction process (σ j q,q-i ) in 15 keV I 10+ -Ne, Ar, Kr and Xe collisions. The branching ratios were determined by the coincidence measurements between charge changing projectile and recoil ions. The electron capture cross sections were measured by the initial growth rate method. The experimental results for total and j electron transfer cross sections were compared with the predictions of the extended classical over-barrier model (ECBM). (orig.)

Validation of 3D-CMCC Forest Ecosystem Model (v.5.1) against eddy covariance data for 10 European forest sites

DEFF Research Database (Denmark)

Collalti, A.; Marconi, S.; Ibrom, Andreas

2016-01-01

This study evaluates the performances of the new version (v.5.1) of 3D-CMCC Forest Ecosystem Model (FEM) in simulating gross primary productivity (GPP), against eddy covariance GPP data for 10 FLUXNET forest sites across Europe. A new carbon allocation module, coupled with new both phenological...... over Europe without a site-related calibration, the model has been deliberately parametrized with a single set of species-specific parametrizations for each forest ecosystem. The model consistently reproduces both in timing and in magnitude daily and monthly GPP variability across all sites...... sites we evaluate whether a more accurate representation of forest structural characteristics (i.e. cohorts, forest layers) and species composition can improve model results. In two of the three sites results reveal that model slightly increases its performances although, statistically speaking...

Application of ambulatory surgery in breast cancer. Hospital 'V. I Lenin' 1996 - 2006

International Nuclear Information System (INIS)

Fernandez Sarabia, Pedro Antonio; Sanz Pupo, Nitza Julia

2009-01-01

Breast cancer ranks among the top in incidence and mortality from oncological diseases worldwide. In our country and our province behaves similarly, represents a major health problem. To compare the results of traditional outpatient surgery in patients diagnosed with breast cancer. Was performed a case-series study of patients operated for malignancy in breast oncology service at the 'Hospital Universitario V. I. Lenin'. It involved 1140 cases, including 260 by the traditional method and 880 (77.19%) for the outpatient method. Modified radical mastectomy was performed to 1010 patients and conservative surgery, 30 of them. The rate of complications present in the operated cases was not significant. (Author)

Modelling, Analysis and Performance Evaluation of Power Conversion Unit in G2V/V2G Application—A Review

Directory of Open Access Journals (Sweden)

María Garcés Quílez

2018-04-01

Full Text Available In response to climate change, which is caused by the increasing pollution of the environment and leads to the deterioration of human health, future electricity generations should reduce reliance on fossil fuels by growing the use of clean and renewable energy generation sources and by using clean vehicle technologies. Battery storage systems have been recognized as one of the most promising approaches for supporting the renewable energy generation sources and cleanly powering vehicles instead of burning gasoline and diesel fuel. However, the cost of batteries is still a prominent barrier for their use in stationary and traction applications. As a rule, the cost of batteries can be decreased by lowering material costs, enhancing process efficiencies, and increasing production volume. Another more effective solution is called Vehicle-to-grid (V2G application. In V2G application, the battery system can be used to support the grid services, whereas the battery is still in the vehicle. To make a battery system economically viable for V2G/G2V applications, an effective power-electronics converter should be selected as well. This converter should be supported by an advanced control strategy. Therefore, this article provides a detailed technical assessment and review of V2G/G2V concepts, in conjunction with various power-electronics converter topologies. In this paper, modeling and detailed control strategies are fully designed and investigated in terms of dynamic response and harmonics. Furthermore, an extensive design and analysis of charging systems for low-duty/high-duty vehicles are also presented.

V-I curves and plasma parameters in a high density DC glow discharge generated by a current-source

International Nuclear Information System (INIS)

Granda-Gutierrez, E E; Lopez-Callejas, R; Piedad-Beneitez, A de la; BenItez-Read, J S; Pacheco-Sotelo, J O; Pena-Eguiluz, R; A, R Valencia; Mercado-Cabrera, A; Barocio, S R

2008-01-01

Nitrogen DC glow discharges, conducted in a cylindrical geometry, have been characterized using a new current-source able to provide 10 -3 - 3 A for the sustainment of the discharge, instead of a conventional voltage-source. The V-I characteristic curves obtained from these discharges were found to fit the general form i(v) = A(p)v k(p) , whereby the plasma itself can be modeled as a voltage-controlled current-source. We conclude that the fitting parameters A and k, which mainly depend on the gas pressure p, are strongly related to the plasma characteristics, so much so that they can indicate the pressure interval in which the maximum plasma density is located, with values in the order of 10 16 m -3 at reduced discharge potential (300-600 V) and low working pressure (10 -1 - 10 1 Pa)

Performance of the phase I superconducting x-ray lithography source (SXLS) at BNL

International Nuclear Information System (INIS)

Murphy, J.B.; Biscardi, R.; Halama, H.; Heese, R.; Kramer, S.; Nawrocky, R.; Krishnaswamy, J.

1992-01-01

The Phase I SXLS electron storage ring has a circumference of 8.5 meters, it uses conventional dipole magnets, B ≤ 1.1 T and ρ=60 cm, and it is capable of operating in the range of 50-250 MeV. It is the forerunner of the Phase II SXLS ring which will operate at 700 MeV and will make use of superconducting dipoles, B 0 =3.87 Tesla, as a source of λ c =10 angstrom x-rays for proximity printing lithography. The Phase I storage ring has been successfully commissioned; stored currents in excess of one ampere have been achieved. A report on the performance of the machine is presented. (author) 4 refs.; 4 figs.; 2 tabs

USTUR WHOLE BODY CASE 0269: DEMONSTRATING EFFECTIVENESS OF I.V. CA-DTPA FOR PU

Energy Technology Data Exchange (ETDEWEB)

James, Anthony C.; Sasser , Lyle B.; Stuit, Dorothy B.; Glover, Samuel E.; Carbaugh, Eugene H.

2008-01-28

This whole body donation case (USTUR Registrant) involved a single acute inhalation of an acidic Pu(NO3)4 solution in the form of an aerosol ‘mist.’ Chelation treatment with i.v. Ca-EDTA was initiated on the day of the intake, and continued intermittently over 6 months. After 2½ years with no further treatment, a course of i.v. Ca-DTPA was administered. A total of 400 measurements of 239+240Pu excreted in urine were recorded; starting on the first day (both before and during the initial Ca-EDTA chelation), and continuing for 37 years. This sampling included all intervals of chelation. In addition, 91 measurements of 239+240Pu-in-feces were recorded over this whole period. The Registrant died about 38 years after the intake, at age 79 y, with extensive carcinomatosis secondary to adenocarcinoma of the prostate gland. At autopsy, all major soft tissue organs were harvested for radiochemical analyses of their 238Pu, 239+240Pu and 241Am content. Also, all types of bone (comprising about half the skeleton) were harvested for radiochemical analyses, as well as samples of skin, subcutaneous fat and muscle. This comprehensive dataset has been applied to derive ‘chelation-enhanced’ transfer rates in the ICRP Publication 67 plutonium biokinetic model, representing the behaviour of blood-borne and tissue-incorporated plutonium during intervals of therapy. The resulting model of the separate effects of i.v. Ca-EDTA and Ca-DTPA chelation shows that the therapy administered in this case succeeded in reducing substantially the long-term burden of plutonium in all body organs, except for the lungs. The calculated reductions in organ content at the time of death are approximately 40% for the liver, 60% for other soft tissues (muscle, skin, glands, etc.), 50% for the kidneys, and 50% for the skeleton. Essentially all of the substantial reduction in skeletal burden occurred in trabecular bone. This modeling exercise demonstrated that 3-y-delayed Ca-DTPA therapy was as

Kuidas hinnata performance'i-kunsti? / Marian Kivila

Index Scriptorium Estoniae

Kivila, Marian

2010-01-01

Vastukaja: Sööt, Mai. Performance'i-kunsti taak. Sirp, 2010, 26. nov., lk. 20. Professionaalsusest tegevuskunstide vallas, performance'i-kunsti spontaansusest ja mõistmisest. Roi Vaara performance'ist "Kuidas kanda enda jalga?". Autori arvates on performance'i-kunst oma keerukuse tõttu kitsama ringkonna pärusmaa

Hybrid Modeling Improves Health and Performance Monitoring

Science.gov (United States)

2007-01-01

Scientific Monitoring Inc. was awarded a Phase I Small Business Innovation Research (SBIR) project by NASA's Dryden Flight Research Center to create a new, simplified health-monitoring approach for flight vehicles and flight equipment. The project developed a hybrid physical model concept that provided a structured approach to simplifying complex design models for use in health monitoring, allowing the output or performance of the equipment to be compared to what the design models predicted, so that deterioration or impending failure could be detected before there would be an impact on the equipment's operational capability. Based on the original modeling technology, Scientific Monitoring released I-Trend, a commercial health- and performance-monitoring software product named for its intelligent trending, diagnostics, and prognostics capabilities, as part of the company's complete ICEMS (Intelligent Condition-based Equipment Management System) suite of monitoring and advanced alerting software. I-Trend uses the hybrid physical model to better characterize the nature of health or performance alarms that result in "no fault found" false alarms. Additionally, the use of physical principles helps I-Trend identify problems sooner. I-Trend technology is currently in use in several commercial aviation programs, and the U.S. Air Force recently tapped Scientific Monitoring to develop next-generation engine health-management software for monitoring its fleet of jet engines. Scientific Monitoring has continued the original NASA work, this time under a Phase III SBIR contract with a joint NASA-Pratt & Whitney aviation security program on propulsion-controlled aircraft under missile-damaged aircraft conditions.

A Combined Optical, Thermal and Electrical Performance Study of a V-Trough PV System—Experimental and Analytical Investigations

Directory of Open Access Journals (Sweden)

Haitham M. Bahaidarah

2015-04-01

Full Text Available The objective of this study was to achieve higher efficiency of a PV system while reducing of the cost of energy generation. Concentration photovoltaics was employed in the present case as it uses low cost reflectors to enhance the efficiency of the PV system and simultaneously reduces the cost of electricity generation. For this purpose a V-trough integrated with the PV system was employed for low concentration photovoltaic (LCPV. Since the electrical output of the concentrating PV system is significantly affected by the temperature of the PV cells, the motivation of the research also included studying the ability to actively cool PV cells to achieve the maximum benefit. The optical, thermal and electrical performance of the V-trough PV system was theoretically modeled and validated with experimental results. Optical modeling of V-trough was carried out to estimate the amount of enhanced absorbed radiation. Due to increase in the absorbed radiation the module temperature was also increased which was predicted by thermal model. Active cooling techniques were studied and the effect of cooling was analyzed on the performance of V-trough PV system. With absorbed radiation and module temperature as input parameters, electrical modeling was carried out and the maximum power was estimated. For the V-trough PV system, experiments were performed for validating the numerical models and very good agreement was found between the two.

Investigation of diode parameters using I-V and C-V characteristics of In/SiO{sub 2}/p-Si (MIS) Schottky diodes

Energy Technology Data Exchange (ETDEWEB)

Yueksel, O.F. [Department of Physics, Faculty of Arts and Science, Selcuk University, Kampus, Konya 42075 (Turkey)], E-mail: fyuksel@selcuk.edu.tr; Selcuk, A.B.; Ocak, S.B. [PK, 14 Etlik, Ankara (Turkey)

2008-08-01

A study on interface states density distribution and characteristic parameters of the In/SiO{sub 2}/p-Si (MIS) capacitor has been made. The thickness of the SiO{sub 2} film obtained from the measurement of the corrected capacitance in the strong accumulation region for MIS Schottky diodes was 220 A. The diode parameters from the forward bias I-V characteristics such as ideality factor, series resistance and barrier heights were found to be 1.75, 106-112 {omega} and 0.592 eV, respectively. The energy distribution of the interface state density D{sub it} was determined from the forward bias I-V characteristics by taking into account the bias dependence of the effective barrier height. The interface state density obtained using the I-V characteristics had an exponential growth, with bias towards the top of the valance band, from 9.44x10{sup 13} eV{sup -1} cm{sup -2} in 0.329-E{sub v} eV to 1.11x10{sup 13} eV{sup -1} cm{sup -2} in 0.527-E{sub v} eV at room temperature. Furthermore, the values of interface state density D{sub it} obtained by the Hill-Coleman method from the C-V characteristics range from 52.9x10{sup 13} to 1.11x10{sup 13} eV{sup -1} cm{sup -2} at a frequency range of 30kHz-1 MHz. These values of D{sub it} and R{sub s} were responsible for the non-ideal behaviour of I-V and C-V characteristics.

Performance management i en krisetid

DEFF Research Database (Denmark)

Elmholdt, Claus Westergård; Hoffmann Birk, Rasmus; Børgesen, Kenneth

2015-01-01

Denne artikel undersøger, om ’performance management’ – eller på dansk præstationsledelse – er et effektivt svar på de udfordringer, som organisationer står overfor i krisetider. I tiden efter finanskrisen i september 2008 er det blevet endnu mere relevant for ledere at kunne navigere i en...

VMware vSphere performance designing CPU, memory, storage, and networking for performance-intensive workloads

CERN Document Server

Liebowitz, Matt; Spies, Rynardt

2014-01-01

Covering the latest VMware vSphere software, an essential book aimed at solving vSphere performance problems before they happen VMware vSphere is the industry's most widely deployed virtualization solution. However, if you improperly deploy vSphere, performance problems occur. Aimed at VMware administrators and engineers and written by a team of VMware experts, this resource provides guidance on common CPU, memory, storage, and network-related problems. Plus, step-by-step instructions walk you through techniques for solving problems and shed light on possible causes behind the problems. Divu

Plantenkaartjes uitgegeven door het I.V.O.N

NARCIS (Netherlands)

NN,

1959-01-01

De serie door het I.V.O.N. gepubliceerde verspreidingskaartjes van Nederlandse plantensoorten is wederom verkrijgbaar. De prijzen zijn als volgt: afl. 1, 1935, 21 kaartjes van diverse soorten f. 1.35 afl. 2, 1936, 32 kaartjes van diverse soorten „ 2.00 afl. 3, 1936, 18 kaartjes van Potamogeton „

Shunt and series resistance of photovoltaic module evaluated from the I-V curve; I-V tokusei kara hyokashita taiyo denchi no shunt teiko to chokuretsu teiko

Energy Technology Data Exchange (ETDEWEB)

Asano, K; Kawamura, H; Yamanaka, S; Kawamura, H; Ono, H [Meijo University, Nagoya (Japan)

1997-11-25

With an objective of discussing I-V characteristics when a shadow has appeared on part of a photovoltaic module, evaluations were given as a first stage of the study on saturation current, shunt resistance and series resistance for the solar cell module. As a result of measuring change in amount of power generated in a sunny day with a shadow appearing over the solar cell module, reduction in power generation capability of about 23% was verified. In other words, the I-V characteristics of the solar cell module change largely because of existence of the shadow caused on the module. The I-V characteristics curve may be expressed and calculated as a function of the shunt resistance and series resistance. By curve-fitting measurement data for a case of changing insolation without existence of partial shadow, values of the shunt resistance and series resistance were derived. As a result, it was found that the calculations agree well with measurements. It was made also clear that each parameter shows temperature dependence. 6 refs., 10 figs., 1 tab.

Minimal Z′ models and the 125 GeV Higgs boson

International Nuclear Information System (INIS)

Basso, L.

2013-01-01

The 1-loop renormalization group equations for the minimal Z ′ models encompassing a type-I seesaw mechanism are studied in the light of the 125 GeV Higgs boson observation. This model is taken as a benchmark for the general case of singlet extensions of the standard model. The most important result is that negative scalar mixing angles are favored with respect to positive values. Further, a minimum value for the latter exists, as well as a maximum value for the masses of the heavy neutrinos, depending on the vacuum expectation value of the singlet scalar

An .I.ex vivo ./I.model to study v-Myb-induced leukemogenicity

Czech Academy of Sciences Publication Activity Database

Dvořáková, Marta; Králová, Jarmila; Karafiát, Vít; Bartůněk, Petr; Dvořák, Michal

2001-01-01

Roč. 27, č. 2 (2001), s. 437-445 ISSN 1079-9796 R&D Projects: GA ČR GV301/98/K042; GA ČR GA204/00/0554; GA AV ČR IPP2052002 Grant - others:HHMI(US) 75195-540401 Institutional research plan: CEZ:AV0Z5052915 Keywords : v-Myb oncoprotein * PEST domain * leucine zipper Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 1.703, year: 2001

Comparison between steady-state and dynamic I-V measurements from a single-cell thermionic fuel element

International Nuclear Information System (INIS)

Wernsman, Bernard

1997-01-01

A comparison between steady-state and dynamic I-V measurements from a single-cell thermionic fuel element (TFE) is made. The single-cell TFE used in this study is the prototype for the 40 kW e space nuclear power system that is similar to the 6 kW e TOPAZ-II. The steady-state I-V measurements influence the emitter temperature due to electron cooling. Therefore, to eliminate the steady-state I-V measurement influence on the TFE and provide a better understanding of the behavior of the thermionic energy converter and TFE characteristics, dynamic I-V measurements are made. The dynamic I-V measurements are made at various input power levels, cesium pressures, collector temperatures, and steady-state current levels. From these measurements, it is shown that the dynamic I-V's do not change the TFE characteristics at a given operating point. Also, the evaluation of the collector work function from the dynamic I-V measurements shows that the collector optimization is not due to a minimum in the collector work function but due to an emission optimization. Since the dynamic I-V measurements do not influence the TFE characteristics, it is believed that these measurements can be done at a system level to understand the influence of TFE placement in the reactor as a function of the core thermal distribution

Model for measuring complex performance in an aviation environment

International Nuclear Information System (INIS)

Hahn, H.A.

1988-01-01

An experiment was conducted to identify models of pilot performance through the attainment and analysis of concurrent verbal protocols. Sixteen models were identified. Novice and expert pilots differed with respect to the models they used. Models were correlated to performance, particularly in the case of expert subjects. Models were not correlated to performance shaping factors (i.e. workload). 3 refs., 1 tab

TR-LIF LIFETIME MEASUREMENTS AND HFR+CPOL CALCULATIONS OF RADIATIVE PARAMETERS IN VANADIUM ATOM (V I)

International Nuclear Information System (INIS)

Wang, Q.; Jiang, L. Y.; Shang, X.; Tian, Y. S.; Dai, Z. W.; Quinet, P.; Palmeri, P.; Zhang, W.

2014-01-01

Radiative lifetimes of 79 levels belonging to the 3d 3 4s4p, 3d 4 4p, 3d 3 4s5p, 3d 4 5p, and 3d 3 4s4d configurations of V I with energy from 26,604.807 to 46,862.786 cm –1 have been measured using time-resolved laser-induced fluorescence (TR-LIF) spectroscopy in laser-produced plasma. The lifetime values reported in this paper are in the range of 3.3-494 ns, and the uncertainties of these measurements are within ±10%. A good agreement was obtained with previous data. HFR+CPOL calculations have been performed and used to combine the calculated branching fractions with the available experimental lifetimes to determine semi-empirical transition probabilities for 784 V I transitions

Parameters Determination of Yoshida Uemori Model Through Optimization Process of Cyclic Tension-Compression Test and V-Bending Springback

Directory of Open Access Journals (Sweden)

Serkan Toros

Full Text Available Abstract In recent years, the studies on the enhancement of the prediction capability of the sheet metal forming simulations have increased remarkably. Among the used models in the finite element simulations, the yield criteria and hardening models have a great importance for the prediction of the formability and springback. The required model parameters are determined by using the several test results, i.e. tensile, compression, biaxial stretching tests (bulge test and cyclic tests (tension-compression. In this study, the Yoshida-Uemori (combined isotropic and kinematic hardening model is used to determine the performance of the springback prediction. The model parameters are determined by the optimization processes of the cyclic test by finite element simulations. However, in the study besides the cyclic tests, the model parameters are also evaluated by the optimization process of both cyclic and V-die bending simulations. The springback angle predictions with the model parameters obtained by the optimization of both cyclic and V-die bending simulations are found to mimic the experimental results in a better way than those obtained from only cyclic tests. However, the cyclic simulation results are found to be close enough to the experimental results.

V2I-based startup assistance system at signalized intersections

Directory of Open Access Journals (Sweden)

Jianqiang Wang

2015-08-01

Full Text Available Traffic delays are caused by unskilled vehicle operation and driver distraction during the startup process at signalized intersections. To address this issue, we propose a V2I-based driver assistance system that can acquire the current traffic signal status and provide drivers with startup assistance. This article presents the proposed system’s architecture and an assistance algorithm, which contains two types of driver assistance methods: startup prompting and automatic startup control. The automatic startup control method, based on fuzzy logic control, is validated in simulation tests. We also implement startup prompting using a prototype system and validate its performance in field tests. The test results suggest that the proposed assistance algorithm can help drivers start up their vehicles with less delay, which will significantly improve traffic efficiency.

Illumination dependence of I-V and C-V characterization of Au/InSb/InP(1 0 0) Schottky structure

International Nuclear Information System (INIS)

Akkal, B.; Benamara, Z.; Bouiadjra, N. Bachir; Tizi, S.; Gruzza, B.

2006-01-01

The effects of surface preparation and illumination on electric parameters of Au/InSb/InP(100) Schottky diode were investigated, in the later diode InSb forms a fine restructuration layer allowing to block In atoms migration to surface. In order to study the electric characteristics under illumination, we make use of an He-Ne laser of 1 mW power and 632.8 nm wavelength. The current-voltage I(V G ), the capacitance-voltage C(V G ) measurements were plotted and analysed. The saturation current I s , the serial resistance R s and the mean ideality factor n are, respectively, equal to 2.03 x 10 -5 A, 85 Ω, 1.7 under dark and to 3.97 x 10 -5 A, 67 Ω, 1.59 under illumination. The analysis of I(V G ) and C(V G ) characteristics allows us to determine the mean interfacial state density N ss and the transmission coefficient θ n equal, respectively, to 4.33 x 10 12 eV -1 cm -2 , 4.08 x 10 -3 under dark and 3.79 x 10 12 eV -1 cm -2 and 5.65 x 10 -3 under illumination. The deep discrete donor levels presence in the semiconductor bulk under dark and under illumination are responsible for the non-linearity of the C -2 (V G ) characteristic

Human, Social, Cultural Behavior (HSCB) Modeling Workshop I: Characterizing the Capability Needs for HSCB Modeling

Science.gov (United States)

2008-07-01

The expectations correspond to different roles individuals perform SocialConstructionis Social constructionism is a school of thought Peter L...HUMAN, SOCIAL , CULTURAL BEHAVIOR (HSCB) MODELING WORKSHOP I: CHARACTERIZING THE CAPABILITY NEEDS FOR HSCB MODELING FINAL REPORT... Social , Cultural Behavior (HSCB) Modeling Workshop I: Characterizing the Capability Needs for HSCB Modeling 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c

The iFlow modelling framework v2.4 : A modular idealized process-based model for flow and transport in estuaries

NARCIS (Netherlands)

Dijkstra, Y.M.; Brouwer, R.L.; Schuttelaars, H.M.; Schramkowski, G.P.

2017-01-01

The iFlow modelling framework is a width-averaged model for the systematic analysis of the water motion and sediment transport processes in estuaries and tidal rivers. The distinctive solution method, a mathematical perturbation method, used in the model allows for identification of the effect of

Transferable tight binding model for strained group IV and III-V heterostructures

Science.gov (United States)

Tan, Yaohua; Povolotskyi, Micheal; Kubis, Tillmann; Boykin, Timothy; Klimeck, Gerhard

Modern semiconductor devices have reached critical device dimensions in the range of several nanometers. For reliable prediction of device performance, it is critical to have a numerical efficient model that are transferable to material interfaces. In this work, we present an empirical tight binding (ETB) model with transferable parameters for strained IV and III-V group semiconductors. The ETB model is numerically highly efficient as it make use of an orthogonal sp3d5s* basis set with nearest neighbor inter-atomic interactions. The ETB parameters are generated from HSE06 hybrid functional calculations. Band structures of strained group IV and III-V materials by ETB model are in good agreement with corresponding HSE06 calculations. Furthermore, the ETB model is applied to strained superlattices which consist of group IV and III-V elements. The ETB model turns out to be transferable to nano-scale hetero-structure. The ETB band structures agree with the corresponding HSE06 results in the whole Brillouin zone. The ETB band gaps of superlattices with common cations or common anions have discrepancies within 0.05eV.

Våld i nära relationer : En diskursanalys kring framställningar om våld i nära relationer i tidskriften Socionomen

OpenAIRE

Alakokkare, Marlene; Andreasson, Cecilia

2014-01-01

Syftet med denna kvalitativa uppsats är att undersöka hur våld i nära relationer framställs i tidskriften Socionomen. Vår empiri består av 42 artiklar som berör våld i nära relationer. Artiklarna är publicerade mellan åren 1997 - 2013 i tidskriften Socionomen. Uppsatsens teoretiska utgångspunkt är ett socialkonstruktionistiskt perspektiv, som bidrar med att synliggöra sociala konstruktioner inom forskningsområdet. Som analysmetod används en form av diskursanalys för att urskilja subjektsposit...

Formula I(1 and I(2: Race Tracks for Likelihood Maximization Algorithms of I(1 and I(2 Cointegrated VAR Models

Directory of Open Access Journals (Sweden)

Jurgen A. Doornik

2017-11-01

Full Text Available This paper provides some test cases, called circuits, for the evaluation of Gaussian likelihood maximization algorithms of the cointegrated vector autoregressive model. Both I(1 and I(2 models are considered. The performance of algorithms is compared first in terms of effectiveness, defined as the ability to find the overall maximum. The next step is to compare their efficiency and reliability across experiments. The aim of the paper is to commence a collective learning project by the profession on the actual properties of algorithms for cointegrated vector autoregressive model estimation, in order to improve their quality and, as a consequence, also the reliability of empirical research.

Analytical performance modeling for computer systems

CERN Document Server

Tay, Y C

2013-01-01

This book is an introduction to analytical performance modeling for computer systems, i.e., writing equations to describe their performance behavior. It is accessible to readers who have taken college-level courses in calculus and probability, networking and operating systems. This is not a training manual for becoming an expert performance analyst. Rather, the objective is to help the reader construct simple models for analyzing and understanding the systems that they are interested in.Describing a complicated system abstractly with mathematical equations requires a careful choice of assumpti

Main modelling features of the ASTEC V2.1 major version

International Nuclear Information System (INIS)

Chatelard, P.; Belon, S.; Bosland, L.; Carénini, L.; Coindreau, O.; Cousin, F.; Marchetto, C.; Nowack, H.; Piar, L.; Chailan, L.

2016-01-01

Highlights: • Recent modelling improvements of the ASTEC European severe accident code are outlined. • Key new physical models now available in the ASTEC V2.1 major version are described. • ASTEC progress towards a multi-design reactor code is illustrated for BWR and PHWR. • ASTEC strong link with the on-going EC CESAM FP7 project is emphasized. • Main remaining modelling issues (on which IRSN efforts are now directing) are given. - Abstract: A new major version of the European severe accident integral code ASTEC, developed by IRSN with some GRS support, was delivered in November 2015 to the ASTEC worldwide community. Main modelling features of this V2.1 version are summarised in this paper. In particular, the in-vessel coupling technique between the reactor coolant system thermal-hydraulics module and the core degradation module has been strongly re-engineered to remove some well-known weaknesses of the former V2.0 series. The V2.1 version also includes new core degradation models specifically addressing BWR and PHWR reactor types, as well as several other physical modelling improvements, notably on reflooding of severely damaged cores, Zircaloy oxidation under air atmosphere, corium coolability during corium concrete interaction and source term evaluation. Moreover, this V2.1 version constitutes the back-bone of the CESAM FP7 project, which final objective is to further improve ASTEC for use in Severe Accident Management analysis of the Gen.II–III nuclear power plants presently under operation or foreseen in near future in Europe. As part of this European project, IRSN efforts to continuously improve both code numerical robustness and computing performances at plant scale as well as users’ tools are being intensified. Besides, ASTEC will continue capitalising the whole knowledge on severe accidents phenomenology by progressively keeping physical models at the state of the art through a regular feed-back from the interpretation of the current and

CSR-i kommunikatsioon: komm või pomm? / Mari Valgepea

Index Scriptorium Estoniae

Valgepea, Mari

2015-01-01

Kuidas rääkida ettevõtte vastutustundlikkusest (CSR) nii, et seda ei tembeldataks PR-trikiks. Kahe vastutustunsliku ettevõtte, AS-i Tallinna Vesi ja Viru Keemia Grupi võimaluste ja libastumisohtude kohta jagavad selgitusi ettevõtete kommunikatsioonijuhid Mariliis Topp ja Irina Bojenko

Väikestest ja suurtest võitjatest : 62. Cannes'i rahvusvahelise filmifestivali auhindadest / Jaak Lõhmus

Index Scriptorium Estoniae

Lõhmus, Jaak, 1955-

2009-01-01

62. Cannes'i festivali peaauhinna võitis Michael Haneke filmiga "Valge pael" ("Das weiße Band"), grand prix' sai prantslase Jacques Audiard'i "Prohvet" ("Un prophete"), parima meestäitja tiitli võitis Christoph Waltz rolli eest Quentin Tarantino filmis "Vääritud tõprad", parima naisosatäitja tiitli võitis Charlotte Gainsbourg rolli eest Lars von Trieri filmis "Antikristus". Lisatud auhinnasaajate nimekiri

An analytical turn-on power loss model for 650-V GaN eHEMTs

DEFF Research Database (Denmark)

Shen, Yanfeng; Wang, Huai; Shen, Zhan

2018-01-01

This paper proposes an improved analytical turn-on power loss model for 650-V GaN eHEMTs. The static characteristics, i.e., the parasitic capacitances and transconductance, are firstly modeled. Then the turn-on process is divided into multiple stages and analyzed in detail; as results, the time-d...

Penerapan Model Pembelajaran TPS Untuk Meningkatkan Hasil Belajar IPA Siswa Kelas V SD No 1 Mengwitani

Directory of Open Access Journals (Sweden)

I W Daniel Winantara

2017-05-01

Full Text Available Tujuan penelitian ini untuk mengetahui peningkatan hasil belajar IPA siswa kelas V SD No. 1 Mengwitani setelah diterapkannya model pembelajaran think pair share (TPS. Penelitian ini adalah penelitian tindakan kelas yang dilakukan dalam dua siklus. Subjek dalam penelitian ini adalah siswa kelas V yang berjumlah 32 orang. Data penelitian ini tentang hasil belajar yang dikumpulkan dengan menggunakan metode tes. Data dianalisis dengan menggunakan statistik kuantitatif. Hasil penelitian menunjukkan adanya peningkatan terhadap hasil belajar IPA siswa kelas V SD No. 1 Mengwitani. Hal ini ditunjukkan dengan hasil penelitian yang diperoleh yaitu persentase rata-rata hasil belajar pada siklus I sebesar 75,31% yang berada pada kategori sedang dan pada siklus II menjadi 80,15% yang berada pada kategori tinggi. Dengan ketuntasan belajar siswa pada siklus I sebesar 65,62% dan pada siklus II mencapai 87,5%. Berdasarkan hasil penelitian tersebut dapat disimpulkan penerapan model pembelajaran think pair share dapat meningkatkan hasil belajar IPA siswa kelas V SD No. 1 Mengwitani.

Ustur whole body case 0269: demonstrating effectiveness of i.v. CA-DTPA for Pu

Energy Technology Data Exchange (ETDEWEB)

James, A.C.; Sasser, L.B.; Stuit, D.B. [US Transuranium and Uranium Registries, College of Pharmacy, Washington State University, 1845 Terminal Drive, Suite 201, Richland, WA 99354 (United States); Glover, S.E. [Department of Mechanical, Industrial and Nuclear Engineering, University of Cincinnati, 598 Rhodes Hall, Cincinnati, OH 45221 (United States); Carbaugh, E.H. [Pacific Northwest National Laboratory, PO Box 999, Richland, WA 99354 (United States)

2007-07-01

This whole body donation case (USTUR Registrant) involved a single acute inhalation of an acidic Pu(NO{sub 3}){sub 4} solution in the form of an aerosol 'mist'. Chelation treatment with intravenously (i.v.) Ca-EDTA was initiated on the day of the intake, and continued intermittently over 6 months. After 2.5 y with no further treatment, a course of i.v. Ca-DTPA was administered. A total of 400 measurements of {sup 239+240}Pu excreted in urine were recorded; starting on the first day (both before and during the initial Ca-EDTA chelation) and continuing for 37 y. This sampling included all intervals of chelation. In addition, 91 measurements of {sup 239+240}Pu-in-feces were recorded over this whole period. The Registrant died about 38 y after the intake, at age 79 y, with extensive carcinomatosis secondary to adenocarcinoma of the prostate gland. At autopsy, all major soft tissue organs were harvested for radiochemical analyses of their {sup 238}Pu, {sup 239+240}Pu and {sup 241}Am content. Also, all types of bone (comprising about half the skeleton) were harvested for radiochemical analyses, as well as samples of skin, subcutaneous fat and muscle. This comprehensive data set has been applied to derive 'chelation-enhanced' transfer rates in the ICRP Publication 67 plutonium biokinetic model, representing the behaviour of blood-borne and tissue-incorporated plutonium during intervals of therapy. The resulting model of the separate effects of i.v. Ca-EDTA and Ca-DTPA chelation shows that the therapy administered in this case succeeded in reducing substantially the long-term burden of plutonium in all body organs, except for the lungs. The calculated reductions in organ content at the time of death are {approx}40% for the liver, 60% for other soft tissues (muscle, skin, glands, etc.), 50% for the kidneys and 50% for the skeleton. Essentially, all of the substantial reduction in skeletal burden occurred in trabecular bone. This modelling exercise

Stres pri delu v nujni medicinski pomoči - prehospitalna enota

OpenAIRE

Ploder, Matej

2013-01-01

Izhodišča: V diplomskem delu smo se lotili vprašanja, kako stres vpliva na delo reševalcev v prehospitalni enoti nujne medicinske pomoči. Reševalci in zdravniki nujne medicinske pomoči se vsakodnevno srečujejo s situacijami, ki vplivajo na njihovo nadaljnjo delo, počutje in psihično stabilnost, predvsem pa na njihovo zdravje, od tragičnih nesreč, katerim so priča, do trenutkov, ko svojega poslanstva ne bi zamenjali za nič na svetu. Pri raziskavi smo ugotavljali, kaj reševalcem sploh predstavl...

A stochastic optimization model under modeling uncertainty and parameter certainty for groundwater remediation design--part I. Model development.

Science.gov (United States)

He, L; Huang, G H; Lu, H W

2010-04-15

Solving groundwater remediation optimization problems based on proxy simulators can usually yield optimal solutions differing from the "true" ones of the problem. This study presents a new stochastic optimization model under modeling uncertainty and parameter certainty (SOMUM) and the associated solution method for simultaneously addressing modeling uncertainty associated with simulator residuals and optimizing groundwater remediation processes. This is a new attempt different from the previous modeling efforts. The previous ones focused on addressing uncertainty in physical parameters (i.e. soil porosity) while this one aims to deal with uncertainty in mathematical simulator (arising from model residuals). Compared to the existing modeling approaches (i.e. only parameter uncertainty is considered), the model has the advantages of providing mean-variance analysis for contaminant concentrations, mitigating the effects of modeling uncertainties on optimal remediation strategies, offering confidence level of optimal remediation strategies to system designers, and reducing computational cost in optimization processes. 2009 Elsevier B.V. All rights reserved.

Glass formation in AgI:Ag2O:V2O5 and AgI:Ag2O:(V2O5+B2O3) systems

International Nuclear Information System (INIS)

Kaushik, R.; Hariharan, K.

1988-01-01

Transport properties of glasses in the system AgI:Ag 2 O: V 2 O 5 and AgI:Ag 2 O: (V 2 O 5 +B 2 O 3 ) have ben investigated. It was found that, at high AgI concentrations, the addition of another glass former (B 2 O 3 ) did not improve the conduction characteristics of the pure vanadate glasses, the best conducting composition of which had ambient temperature, ionic conductivity comparable to that of conventional liquid electrolytes. The highest conducting composition was used as an electrolyte in the study of silver solid state cells. The discharge characteristics of different cells fabricated with the glassy electrolyte, have been compared with those having the best conducting polycrystalline ompositions as electrolytes. 11 refs.; 4 figs.; 1 table

An approach to communications security for a communications data delivery system for V2V/V2I safety : technical description and identification of policy and institutional issues.

Science.gov (United States)

This report identifies the security approach associated with a communications data delivery system that supports vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) communications. The report describes the risks associated with communication...

The M405V allele of the glutaryl-CoA dehydrogenase gene is an important marker for glutaric aciduria type I (GA-I) low excretors.

Science.gov (United States)

Schillaci, Lori-Anne P; Greene, Carol L; Strovel, Erin; Rispoli-Joines, Jessica; Spector, Elaine; Woontner, Michael; Scharer, Gunter; Enns, Gregory M; Gallagher, Renata; Zinn, Arthur B; McCandless, Shawn E; Hoppel, Charles L; Goodman, Stephen I; Bedoyan, Jirair K

2016-09-01

Glutaric aciduria type I (GA-I) is an autosomal recessive organic aciduria resulting from a functional deficiency of glutaryl-CoA dehydrogenase, encoded by GCDH. Two clinically indistinguishable diagnostic subgroups of GA-I are known; low and high excretors (LEs and HEs, respectively). Early medical and dietary interventions can result in significantly better outcomes and improved quality of life for patients with GA-I. We report on nine cases of GA-I LE patients all sharing the M405V allele with two cases missed by newborn screening (NBS) using tandem mass spectrometry (MS/MS). We describe a novel case with the known pathogenic M405V variant and a novel V133L variant, and present updated and previously unreported clinical, biochemical, functional and molecular data on eight other patients all sharing the M405V allele. Three of the nine patients are of African American ancestry, with two as siblings. GCDH activity was assayed in six of the nine patients and varied from 4 to 25% of the control mean. We support the use of urine glutarylcarnitine as a biochemical marker of GA-I by demonstrating that glutarylcarnitine is efficiently cleared by the kidney (50-90%) and that plasma and urine glutarylcarnitine follow a linear relationship. We report the allele frequencies for three known GA-I LE GCDH variants (M405V, V400M and R227P) and note that both the M405V and V400M variants are significantly more common in the population of African ancestry compared to the general population. This report highlights the M405V allele as another important molecular marker in patients with the GA-I LE phenotype. Therefore, the incorporation into newborn screening of molecular screening for the M405V and V400M variants in conjunction with MS/MS could help identify asymptomatic at-risk GA-I LE patients that could potentially be missed by current NBS programs. Copyright © 2016 Elsevier Inc. All rights reserved.

I-V Characteristics of a Static Random Access Memory Cell Utilizing Ferroelectric Transistors

Science.gov (United States)

Laws, Crystal; Mitchell, Cody; Hunt, Mitchell; Ho, Fat D.; MacLeod, Todd C.

2012-01-01

I-V characteristics for FeFET different than that of MOSFET Ferroelectric layer features hysteresis trend whereas MOSFET behaves same for both increasing and decreasing VGS FeFET I-V characteristics doesn't show dependence on VDS A Transistor with different channel length and width as well as various resistance and input voltages give different results As resistance values increased, the magnitude of the drain current decreased.

Online dynamical downscaling of temperature and precipitation within the iLOVECLIM model (version 1.1)

Science.gov (United States)

Quiquet, Aurélien; Roche, Didier M.; Dumas, Christophe; Paillard, Didier

2018-02-01

This paper presents the inclusion of an online dynamical downscaling of temperature and precipitation within the model of intermediate complexity iLOVECLIM v1.1. We describe the following methodology to generate temperature and precipitation fields on a 40 km × 40 km Cartesian grid of the Northern Hemisphere from the T21 native atmospheric model grid. Our scheme is not grid specific and conserves energy and moisture in the same way as the original climate model. We show that we are able to generate a high-resolution field which presents a spatial variability in better agreement with the observations compared to the standard model. Although the large-scale model biases are not corrected, for selected model parameters, the downscaling can induce a better overall performance compared to the standard version on both the high-resolution grid and on the native grid. Foreseen applications of this new model feature include the improvement of ice sheet model coupling and high-resolution land surface models.

Using adaptive neuro fuzzy inference system (ANFIS) for proton exchange membrane fuel cell (PEMFC) performance modeling

International Nuclear Information System (INIS)

Rezazadeh, S.; Mirzaee, I.; Mehrabi, M.

2012-01-01

In this paper, an adaptive neuro fuzzy inference system (ANFIS) is used for modeling proton exchange membrane fuel cell (PEMFC) performance using some numerically investigated and compared with those to experimental results for training and test data. In this way, current density I (A/cm 2 ) is modeled to the variation of pressure at the cathode side P C (atm), voltage V (V), membrane thickness (mm), Anode transfer coefficient α an , relative humidity of inlet fuel RH a and relative humidity of inlet air RH c which are defined as input (design) variables. Then, we divided these data into train and test sections to do modeling. We instructed ANFIS network by 80% of numerical validated data. 20% of primary data which had been considered for testing the appropriateness of the models was entered ANFIS network models and results were compared by three statistical criterions. Considering the results, it is obvious that our proposed modeling by ANFIS is efficient and valid and it can be expanded for more general states

Using adaptive neuro fuzzy inference system (ANFIS) for proton exchange membrane fuel cell (PEMFC) performance modeling

Energy Technology Data Exchange (ETDEWEB)

Rezazadeh, S.; Mirzaee, I. [Urmia Univ., Urmia (Iran, Islamic Republic of); Mehrabi, M. [University of Pretoria, Pretoria (South Africa)

2012-11-15

In this paper, an adaptive neuro fuzzy inference system (ANFIS) is used for modeling proton exchange membrane fuel cell (PEMFC) performance using some numerically investigated and compared with those to experimental results for training and test data. In this way, current density I (A/cm{sup 2}) is modeled to the variation of pressure at the cathode side P{sup C} (atm), voltage V (V), membrane thickness (mm), Anode transfer coefficient {alpha}{sup an}, relative humidity of inlet fuel RH{sup a} and relative humidity of inlet air RH{sup c} which are defined as input (design) variables. Then, we divided these data into train and test sections to do modeling. We instructed ANFIS network by 80% of numerical validated data. 20% of primary data which had been considered for testing the appropriateness of the models was entered ANFIS network models and results were compared by three statistical criterions. Considering the results, it is obvious that our proposed modeling by ANFIS is efficient and valid and it can be expanded for more general states.

Performance measurement of PSF modeling reconstruction (True X) on Siemens Biograph TruePoint TrueV PET/CT.

Science.gov (United States)

Lee, Young Sub; Kim, Jin Su; Kim, Kyeong Min; Kang, Joo Hyun; Lim, Sang Moo; Kim, Hee-Joung

2014-05-01

The Siemens Biograph TruePoint TrueV (B-TPTV) positron emission tomography (PET) scanner performs 3D PET reconstruction using a system matrix with point spread function (PSF) modeling (called the True X reconstruction). PET resolution was dramatically improved with the True X method. In this study, we assessed the spatial resolution and image quality on a B-TPTV PET scanner. In addition, we assessed the feasibility of animal imaging with a B-TPTV PET and compared it with a microPET R4 scanner. Spatial resolution was measured at center and at 8 cm offset from the center in transverse plane with warm background activity. True X, ordered subset expectation maximization (OSEM) without PSF modeling, and filtered back-projection (FBP) reconstruction methods were used. Percent contrast (% contrast) and percent background variability (% BV) were assessed according to NEMA NU2-2007. The recovery coefficient (RC), non-uniformity, spill-over ratio (SOR), and PET imaging of the Micro Deluxe Phantom were assessed to compare image quality of B-TPTV PET with that of the microPET R4. When True X reconstruction was used, spatial resolution was RC with True X reconstruction was higher than that with the FBP method and the OSEM without PSF modeling method on the microPET R4. The non-uniformity with True X reconstruction was higher than that with FBP and OSEM without PSF modeling on microPET R4. SOR with True X reconstruction was better than that with FBP or OSEM without PSF modeling on the microPET R4. This study assessed the performance of the True X reconstruction. Spatial resolution with True X reconstruction was improved by 45 % and its % contrast was significantly improved compared to those with the conventional OSEM without PSF modeling reconstruction algorithm. The noise level was higher than that with the other reconstruction algorithm. Therefore, True X reconstruction should be used with caution when quantifying PET data.

Allele frequencies of hemojuvelin gene (HJV I222N and G320V missense mutations in white and African American subjects from the general Alabama population

Directory of Open Access Journals (Sweden)

Bohannon Sean B

2004-12-01

Full Text Available Abstract Background Homozygosity or compound heterozygosity for coding region mutations of the hemojuvelin gene (HJV in whites is a cause of early age-of-onset iron overload (juvenile hemochromatosis, and of hemochromatosis phenotypes in some young or middle-aged adults. HJV coding region mutations have also been identified recently in African American primary iron overload and control subjects. Primary iron overload unexplained by typical hemochromatosis-associated HFE genotypes is common in white and black adults in Alabama, and HJV I222N and G320V were detected in a white Alabama juvenile hemochromatosis index patient. Thus, we estimated the frequency of the HJV missense mutations I222N and G320V in adult whites and African Americans from Alabama general population convenience samples. Methods We evaluated the genomic DNA of 241 Alabama white and 124 African American adults who reported no history of hemochromatosis or iron overload to detect HJV missense mutations I222N and G320V using polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP technique. Analysis for HJV I222N was performed in 240 whites and 124 African Americans. Analysis for HJV G320V was performed in 241 whites and 118 African Americans. Results One of 240 white control subjects was heterozygous for HJV I222N; she was also heterozygous for HFE C282Y, but had normal serum iron measures and bone marrow iron stores. HJV I222N was not detected in 124 African American subjects. HJV G320V was not detected in 241 white or 118 African American subjects. Conclusions HJV I222N and G320V are probably uncommon causes or modifiers of primary iron overload in adult whites and African Americans in Alabama. Double heterozygosity for HJV I222N and HFE C282Y may not promote increased iron absorption.

Systemic morphine blocks the seizures induced by intracerebroventricular (i.c.v.) injections of opiates and opioid peptides.

Science.gov (United States)

Urca, G; Frenk, H

1982-08-19

Intracerebroventricular (i.c.v.) injections of the endorphins and of morphine in rats produce highly characteristic, naloxone sensitive, electrographic seizures. In contrast, systemic injections of morphine have been shown to exert a marked anticonvulsant effect. The present study demonstrates that systemic morphine pretreatment can prevent the occurrence of electrographic seizures injected by i.c.v. morphine, Leu-enkephalin and beta-endorphin and that the anti-epileptic effect of morphine can be reversed by naloxone. Male albino rats, previously prepared for chronic i.c.v. injections and EEG recordings, were pretreated with 0--100 mg/kg of intraperitoneal (i.p.) morphine. Thirty five minutes later morphine (520 nmol), Leu-enkephalin (80 nmol) or beta-endorphin (5 nmol) were injected i.c.v. Pretreatment with i.p. morphine blocked the occurrence of seizures induced by morphine and both endogenous opioids. Lower doses of systemic morphine (50 mg/kg) were necessary to block i.c.v. morphine seizures than the dose (100 mg/kg) necessary to block seizures induced by i.c.v. Leu-enkephalin and beta-endorphin. Naloxone (1 mg/kg) administered 25 min following 50 mg/kg of i.p. morphine and preceding the injections of i.c.v. morphine reversed the antiepileptic effect of systemic morphine. These results demonstrate the possible existence of two opiate sensitive systems, one with excitatory-epileptogenic effects and the other possessing inhibitory-antiepileptic properties. The possible relationship between these findings and the known heterogeneity of opiate receptors and opiate actions is discussed.

Magnus v Rige, i sljozõ na glazahh / Kristi Leppik

Index Scriptorium Estoniae

Leppik, Kristi

2008-01-01

Kadri Kõusaare Cannes'i programmis esilinastunud debüütfilmi "Magnus" esilinastuselt Läti väärtfilmikinos Cinema Riga, kus kohal olid režissöör. Filmi Eestis näitamise keelamise problemaatikast

Complete Vision-Based Traffic Sign Recognition Supported by an I2V Communication System

Directory of Open Access Journals (Sweden)

Miguel Gavilán

2012-01-01

Full Text Available This paper presents a complete traffic sign recognition system based on vision sensor onboard a moving vehicle which detects and recognizes up to one hundred of the most important road signs, including circular and triangular signs. A restricted Hough transform is used as detection method from the information extracted in contour images, while the proposed recognition system is based on Support Vector Machines (SVM. A novel solution to the problem of discarding detected signs that do not pertain to the host road is proposed. For that purpose infrastructure-to-vehicle (I2V communication and a stereo vision sensor are used. Furthermore, the outputs provided by the vision sensor and the data supplied by the CAN Bus and a GPS sensor are combined to obtain the global position of the detected traffic signs, which is used to identify a traffic sign in the I2V communication. This paper presents plenty of tests in real driving conditions, both day and night, in which an average detection rate over 95% and an average recognition rate around 93% were obtained with an average runtime of 35 ms that allows real-time performance.

Complete vision-based traffic sign recognition supported by an I2V communication system.

Science.gov (United States)

García-Garrido, Miguel A; Ocaña, Manuel; Llorca, David F; Arroyo, Estefanía; Pozuelo, Jorge; Gavilán, Miguel

2012-01-01

This paper presents a complete traffic sign recognition system based on vision sensor onboard a moving vehicle which detects and recognizes up to one hundred of the most important road signs, including circular and triangular signs. A restricted Hough transform is used as detection method from the information extracted in contour images, while the proposed recognition system is based on Support Vector Machines (SVM). A novel solution to the problem of discarding detected signs that do not pertain to the host road is proposed. For that purpose infrastructure-to-vehicle (I2V) communication and a stereo vision sensor are used. Furthermore, the outputs provided by the vision sensor and the data supplied by the CAN Bus and a GPS sensor are combined to obtain the global position of the detected traffic signs, which is used to identify a traffic sign in the I2V communication. This paper presents plenty of tests in real driving conditions, both day and night, in which an average detection rate over 95% and an average recognition rate around 93% were obtained with an average runtime of 35 ms that allows real-time performance.

Synergistic Development, Test, and Qualification Approaches for the Ares I and V Launch Vehicles

Science.gov (United States)

Cockrell, Charles E.; Taylor, James L.; Patterson, Alan; Stephens, Samuel E.; Tyson, Richard W.; Hueter, Uwe

2009-01-01

The U.S. National Aeronautics and Space Administration is designing and developing the Ares I and Ares V launch vehicles for access to the International Space Station (ISS) and human exploration of the Moon. The Ares I consists of a first stage reusable five-segment solid rocket booster, a upper stage using a J-2X engine derived from heritage experience (Saturn and Space Shuttle External Tank programs), and the Orion crew exploration vehicle (CEV). The Ares V is designed to minimize the development and overall life-cycle costs by leveraging off of the Ares I design. The Ares V consists of two boosters, a core stage, an earth departure stage (EDS), and a shroud. The core stage and EDS use LH2/LO2 propellants, metallic propellant tanks, and composite dry structures. The core stage has six RS-68B upgraded Delta IV engines while the EDS uses a J-2X engine for second stage ascent and trans-lunar injection (TLI) burn. System and propulsion tests and qualification approaches for Ares V elements are being considered as follow-on extensions of the Ares I development program. Following Ares I IOC, testing will be conducted to verify the J-2X engine's orbital restart and TLI burn capability. The Ares I upper stage operation will be demonstrated through integrated stage development and acceptance testing. The EDS will undergo similar development and acceptance testing with additional testing to verify aspects of cryogenic propellant management, operation of sub-systems in a space simulation environment, and orbital re-start of the main propulsion system. RS-68B certification testing will be conducted along with integrated core stage development and acceptance testing. Structural testing of the Ares V EDS and core stage propellant tanks will be conducted similar to the Ares I upper stage. The structural qualification testing may be accomplished with separate propellant tank test articles. Structural development and qualification testing of the dry structure will be pursued as

Scrutinizing the alignment limit in two-Higgs-doublet models. II. mH=125 GeV

Science.gov (United States)

Bernon, Jérémy; Gunion, John F.; Haber, Howard E.; Jiang, Yun; Kraml, Sabine

2016-02-01

In the alignment limit of a multidoublet Higgs sector, one of the Higgs mass eigenstates aligns in field space with the direction of the scalar field vacuum expectation values, and its couplings approach those of the Standard Model (SM) Higgs boson. We consider C P -conserving two-Higgs-doublet models (2HDMs) of type I and type II near the alignment limit in which the heavier of the two C P -even Higgs bosons, H , is the SM-like state observed with a mass of 125 GeV, and the couplings of H to gauge bosons approach those of the SM. We review the theoretical structure and analyze the phenomenological implications of this particular realization of the alignment limit, where decoupling of the extra states cannot occur given that the lighter C P -even state h must, by definition, have a mass below 125 GeV. For the numerical analysis, we perform scans of the 2HDM parameter space employing the software packages 2hdmc and lilith, taking into account all relevant pre-LHC constraints, constraints from the measurements of the 125 GeV Higgs signal at the LHC, as well as the most recent limits coming from searches for other Higgs-like states. Implications for Run 2 at the LHC, including expectations for observing the other scalar states, are also discussed.

Når det er svært at være ung i DK

DEFF Research Database (Denmark)

Nielsen, Jens Christian; Sørensen, Niels Ulrik; Ozmec, Martha Nina

I rapporten Når det er svært at være ung i DK – unges trivsel og mistrivsel i tal offentliggør Center for Ungdomsforskning resultaterne af en stor videnskabelig spørgeskemaundersøgelse om trivsel og mistrivsel blandt 15-24-årige unge i Danmark. Rapporten indgår i det treårige forskningsprojekt Når...... det er svært at være ung i DK, som Center for Ungdomsforskning udfører med støtte fra Egmont Fonden. Rapporten bygger på telefoninterviews med 3.481 unge, der udgør et repræsentativt udsnit af alle 15-24-årige unge i Danmark. I rapporten forfølges de unges trivsel og mistrivsel gennem to spor: 1) Et...

Optical model analysis for 30MeV polarized proton elastic scattering

International Nuclear Information System (INIS)

Pham, D.-L.; Swiniarski, R. de.

1977-05-01

The proton elastic scattering cross sections and analyzing powers at 30MeV have been used to derive optical model parameters for ten elements from 10 B to 32 S. A set of average geometrical parameters (rsub(o)=1.10fm, rsub(LS)=1.0fm and asub(I)=0.60fm) is found to give good fits to the entire data, the other geometrical parameters being rsub(I)=(1.35+-0.15)fm, asub(o)=(0.75+-0.10)fm and asub(LS)=(0.35+-0.07)fm. The dynamical parameters with fixed geometry are presented

<i>Phaeobacter inhibensi> as biocontrol agent against <i>Vibrio vulnificusi> in oyster models

DEFF Research Database (Denmark)

Porsby, Cisse Hedegaard; Gram, Lone

2016-01-01

acid (TDA), inhibited V. vulnificus as did pure TDA (MIC of 1-3.9 μM). P. inhibens DSM 17395 (at 106 cfu/ml) eradicated 105 cfu/ml V. vulnificus CMCP6 (a rifampicin resistant variant) from a co-culture oyster model system (oyster juice) whereas the pathogen grew to 107 cfu/ml when co......, the presence of P. inhibens could not prevent subsequently added V. vulnificus from entering the live animals, likely because of too low levels of the biocontrol strain. Whilst the oyster model studies provided indication that P. inhibens DSM 17395 could be a good candidate as biocontrol agent against V...

Subjet double-b quark tagging performance in 5 TeV pp collisions

CERN Document Server

CMS Collaboration

2018-01-01

Nearly collinear pairs of partons are sensitive to potential novel coherence effects in the parton energy loss process, which can be observed through measurements of jet substructure. This analysis presents a new measurement of jets containing a gluon that splits into a heavy quark pair, i.e., a heavy-quark antenna. Such jets are identified by analyzing the groomed substructure of double b-tagged jets. The grooming procedure allows the identification of the hardest splitting process within the parton shower and is sensitive to the virtuality evolution of the parton. Detector performance studies are shown for 5.02 TeV simulations.

Piezoresistive Cantilever Performance-Part I: Analytical Model for Sensitivity.

Science.gov (United States)

Park, Sung-Jin; Doll, Joseph C; Pruitt, Beth L

2010-02-01

An accurate analytical model for the change in resistance of a piezoresistor is necessary for the design of silicon piezoresistive transducers. Ion implantation requires a high-temperature oxidation or annealing process to activate the dopant atoms, and this treatment results in a distorted dopant profile due to diffusion. Existing analytical models do not account for the concentration dependence of piezoresistance and are not accurate for nonuniform dopant profiles. We extend previous analytical work by introducing two nondimensional factors, namely, the efficiency and geometry factors. A practical benefit of this efficiency factor is that it separates the process parameters from the design parameters; thus, designers may address requirements for cantilever geometry and fabrication process independently. To facilitate the design process, we provide a lookup table for the efficiency factor over an extensive range of process conditions. The model was validated by comparing simulation results with the experimentally determined sensitivities of piezoresistive cantilevers. We performed 9200 TSUPREM4 simulations and fabricated 50 devices from six unique process flows; we systematically explored the design space relating process parameters and cantilever sensitivity. Our treatment focuses on piezoresistive cantilevers, but the analytical sensitivity model is extensible to other piezoresistive transducers such as membrane pressure sensors.

I219V polymorphism in hMLH1 gene in patients affected with ulcerative colitis.

Science.gov (United States)

Vietri, Maria Teresa; Riegler, Gabriele; De Paola, Marialaura; Simeone, Serena; Boggia, Maria; Improta, Alessia; Parisi, Mariarita; Molinari, Anna Maria; Cioffi, Michele

2009-04-01

hMLH1 gene, lying on chromosome 3p21-23, is a key factor of the mismatch repair (MMR) complex, which amends DNA replication errors. MMR alterations are involved in the development of both hereditary and sporadic forms of colorectal carcinoma related to ulcerative colitis (UC). I219V Polymorphism is located on exon 8 of hMLH1 and provides an aminoacidic substitution of isoleucine to valine, on the protein codon 219. This may affect the speed and fidelity of protein synthesis because of a tRNA paucity or changes in the mRNA secondary structure. Most of the hereditary nonpolyposis colon cancer-associated missense mutations of hMLH1 cause structural changes of the amino- or carboxy-terminal regions, involving the domains that interact with ATP and hPMS2. In this study, we analyzed the hMLH1 I219V polymorphism frequency in colectomized patients with UC. Venous blood from 100 ulcerative patients and 97 apparently healthy subjects has been collected. Out of 100 patients affected with UC, 75 noncolectomized showed an alternating course of disease, while 25 did not respond to the common drugs, and underwent colectomy. Genotyping was performed by polymerase chain reaction and following enzymatic digestion by BccI. No significant differences were found between patients with UC and controls both for genotype and allele frequencies. However, our data show a significant association when colectomized and noncolectomized patients are compared. The frequencies of G homozygosity were 28% in colectomized and 10.7% in noncolectomized patients (p < 0.05, chi(2) = 4.4, Odds ratio = 3.3). The allele frequencies of allele A were 52% in colectomized and 68% in noncolectomized patients; while those of allele G were 48% and 32%, respectively. I219V polymorphism in hMLH1 could influence the clinical course of the disease and lead to resistance to therapy.

iCrowd: agent-based behavior modeling and crowd simulator

Science.gov (United States)

Kountouriotis, Vassilios I.; Paterakis, Manolis; Thomopoulos, Stelios C. A.

2016-05-01

Initially designed in the context of the TASS (Total Airport Security System) FP-7 project, the Crowd Simulation platform developed by the Integrated Systems Lab of the Institute of Informatics and Telecommunications at N.C.S.R. Demokritos, has evolved into a complete domain-independent agent-based behavior simulator with an emphasis on crowd behavior and building evacuation simulation. Under continuous development, it reflects an effort to implement a modern, multithreaded, data-oriented simulation engine employing latest state-of-the-art programming technologies and paradigms. It is based on an extensible architecture that separates core services from the individual layers of agent behavior, offering a concrete simulation kernel designed for high-performance and stability. Its primary goal is to deliver an abstract platform to facilitate implementation of several Agent-Based Simulation solutions with applicability in several domains of knowledge, such as: (i) Crowd behavior simulation during [in/out] door evacuation. (ii) Non-Player Character AI for Game-oriented applications and Gamification activities. (iii) Vessel traffic modeling and simulation for Maritime Security and Surveillance applications. (iv) Urban and Highway Traffic and Transportation Simulations. (v) Social Behavior Simulation and Modeling.

Performance modeling, loss networks, and statistical multiplexing

CERN Document Server

Mazumdar, Ravi

2009-01-01

This monograph presents a concise mathematical approach for modeling and analyzing the performance of communication networks with the aim of understanding the phenomenon of statistical multiplexing. The novelty of the monograph is the fresh approach and insights provided by a sample-path methodology for queueing models that highlights the important ideas of Palm distributions associated with traffic models and their role in performance measures. Also presented are recent ideas of large buffer, and many sources asymptotics that play an important role in understanding statistical multiplexing. I

PV Performance Modeling Methods and Practices: Results from the 4th PV Performance Modeling Collaborative Workshop.

Energy Technology Data Exchange (ETDEWEB)

Stein, Joshua [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-03-01

In 2014, the IEA PVPS Task 13 added the PVPMC as a formal activity to its technical work plan for 2014-2017. The goal of this activity is to expand the reach of the PVPMC to a broader international audience and help to reduce PV performance modeling uncertainties worldwide. One of the main deliverables of this activity is to host one or more PVPMC workshops outside the US to foster more international participation within this collaborative group. This report reviews the results of the first in a series of these joint IEA PVPS Task 13/PVPMC workshops. The 4th PV Performance Modeling Collaborative Workshop was held in Cologne, Germany at the headquarters of TÜV Rheinland on October 22-23, 2015.

Assessment of perioperative mortality risk in patients with infective endocarditis undergoing cardiac surgery: performance of the EuroSCORE I and II logistic models.

Science.gov (United States)

Madeira, Sérgio; Rodrigues, Ricardo; Tralhão, António; Santos, Miguel; Almeida, Carla; Marques, Marta; Ferreira, Jorge; Raposo, Luís; Neves, José; Mendes, Miguel

2016-02-01

The European System for Cardiac Operative Risk Evaluation (EuroSCORE) has been established as a tool for assisting decision-making in surgical patients and as a benchmark for quality assessment. Infective endocarditis often requires surgical treatment and is associated with high mortality. This study was undertaken to (i) validate both versions of the EuroSCORE, the older logistic EuroSCORE I and the recently developed EuroSCORE II and to compare their performances; (ii) identify predictors other than those included in the EuroSCORE models that might further improve their performance. We retrospectively studied 128 patients from a single-centre registry who underwent heart surgery for active infective endocarditis between January 2007 and November 2014. Binary logistic regression was used to find independent predictors of mortality and to create a new prediction model. Discrimination and calibration of models were assessed by receiver-operating characteristic curve analysis, calibration curves and the Hosmer-Lemeshow test. The observed perioperative mortality was 16.4% (n = 21). The median EuroSCORE I and EuroSCORE II were 13.9% interquartile range (IQ) (7.0-35.0) and 6.6% IQ (3.5-18.2), respectively. Discriminative power was numerically higher for EuroSCORE II {area under the curve (AUC) of 0.83 [95% confidence interval (CI), 0.75-0.91]} than for EuroSCORE I [0.75 (95% CI, 0.66-0.85), P = 0.09]. The Hosmer-Lemeshow test showed good calibration for EuroSCORE II (P = 0.08) but not for EuroSCORE I (P = 0.04). EuroSCORE I tended to over-predict and EuroSCORE II to under-predict mortality. Among the variables known to be associated with greater infective endocarditis severity, only prosthetic valve infective endocarditis remained an independent predictor of mortality [odds ratio (OR) 6.6; 95% CI, 1.1-39.5; P = 0.04]. The new model including the EuroSCORE II variables and variables known to be associated with greater infective endocarditis severity showed an AUC of 0

III-V/Active-Silicon Integration for Low-Cost High-Performance Concentrator Photovoltaics

Energy Technology Data Exchange (ETDEWEB)

Ringel, Steven [The Ohio State Univ., Columbus, OH (United States); Carlin, John A [The Ohio State Univ., Columbus, OH (United States); Grassman, Tyler [The Ohio State Univ., Columbus, OH (United States)

2018-04-17

This FPACE project was motivated by the need to establish the foundational pathway to achieve concentrator solar cell efficiencies greater than 50%. At such an efficiency, DOE modeling projected that a III-V CPV module cost of $0.50/W or better could be achieved. Therefore, the goal of this project was to investigate, develop and advance a III-V/Si mulitjunction (MJ) CPV technology that can simultaneously address the primary cost barrier for III-V MJ solar cells while enabling nearly ideal MJ bandgap profiles that can yield efficiencies in excess of 50% under concentrated sunlight. The proposed methodology was based on use of our recently developed GaAsP metamorphic graded buffer as a pathway to integrate unique GaAsP and Ga-rich GaInP middle and top junctions having bandgaps that are adjustable between 1.45 – 1.65 eV and 1.9 – 2.1 eV, respectively, with an underlying, 1.1 eV active Si subcell/substrate. With this design, the Si can be an active component sub-cell due to the semi-transparent nature of the GaAsP buffer with respect to Si as well as a low-cost alternative substrate that is amenable to scaling with existing Si foundry infrastructure, providing a reduction in materials cost and a low cost path to manufacturing at scale. By backside bonding of a SiGe, a path to exceed 50% efficiency is possible. Throughout the course of this effort, an expansive range of new understanding was achieved that has stimulated worldwide efforts in III-V/Si PV R&D that spanned materials development, metamorphic device optimization, and complete III-V/Si monolithic integration. Highlights include the demonstration of the first ideal GaP/Si interfaces grown by industry-standard MOCVD processes, the first high performance metamorphic tunnel junctions designed for III-V/Si integration, record performance of specific metamorphic sub-cell designs, the first fully integrated GaInP/GaAsP/Si double (1.7 eV/1.1 eV) and triple (1.95 eV/1.5 eV/1.1 eV) junction solar cells, the first

High-performance file I/O in Java : existing approaches and bulk I/O extensions.

Energy Technology Data Exchange (ETDEWEB)

Bonachea, D.; Dickens, P.; Thakur, R.; Mathematics and Computer Science; Univ. of California at Berkeley; Illinois Institute of Technology

2001-07-01

There is a growing interest in using Java as the language for developing high-performance computing applications. To be successful in the high-performance computing domain, however, Java must not only be able to provide high computational performance, but also high-performance I/O. In this paper, we first examine several approaches that attempt to provide high-performance I/O in Java - many of which are not obvious at first glance - and evaluate their performance on two parallel machines, the IBM SP and the SGI Origin2000. We then propose extensions to the Java I/O library that address the deficiencies in the Java I/O API and improve performance dramatically. The extensions add bulk (array) I/O operations to Java, thereby removing much of the overhead currently associated with array I/O in Java. We have implemented the extensions in two ways: in a standard JVM using the Java Native Interface (JNI) and in a high-performance parallel dialect of Java called Titanium. We describe the two implementations and present performance results that demonstrate the benefits of the proposed extensions.

Evaluation of resting brain conditions measured by two different methods (i.v. and oral administration) with 18F-FDG-PET

International Nuclear Information System (INIS)

Masud, M.; Yamaguchi, Keiichiro; Rikimaru, Hisashi; Tashiro, Manabu; Ozaki, Kaoru; Watanuki, Shoichi; Miyake, Masayasu; Ido, Tatsuo; Itoh, Masatoshi

2001-01-01

Our aim was to evaluate regional differences between brain activity in two resting control conditions measured by 3D PET after administration of FDG through either the intravenous (i.v.) or the oral route. Ten healthy male volunteers engaged in the study as the i.v. group (mean age, 26±9.3 years, ±S.D.) who received FDG intravenously and another 10 volunteers as the oral group (mean age, 27.9±11.3 years, ±S.D.) who received FDG per os. A set of 3D-PET scans (emission and transmission scans) were performed in both groups. To explore possible functional differences between the brains of the two groups, the SPM-96 software was used for statistical analysis. The results revealed that glucose metabolism was significantly higher in the superior frontal gyrus, superior parietal lobule, lingual gyrus and left cerebellar hemisphere in the i.v. group than in the oral group. Metabolically active areas were found in the superior, middle and inferior temporal gyrus, parahippocampal gyrus, amygdaloid nucleus, pons and cerebellum in the oral group when compared with the i.v. group. These differences were presumably induced by differences between FDG kinetics and/or time-weighted behavioral effects in the two studies. This study suggests the need for extreme caution when selecting a pooled control population for designated activation studies. (author)

Når det er svært at være ung i DK

DEFF Research Database (Denmark)

Nielsen, Jens Christian; Sørensen, Niels Ulrik; Grubb, Ane

I rapporten Når det er svært at være ung i DK – unges beretninger om mistrivsel og ungdomsliv præsenteres resultaterne af et kvalitativt studie af mistrivsel og ungdomsliv blandt 15-24-årige unge i Danmark. Studiet bygger på dybdegående interviews med 33 unge fra forskellige dele af landet, der...... fortæller om deres erfaringer med diverse mistrivselsformer, som ensomhed, selvskadende adfærd og mobning, og om deres besvær med at håndtere de krav, udfordringer og muligheder, der i øvrigt præger det moderne ungdomsliv. Studiet indgår i det treårige forskningsprojekt Når det er svært at være ung i DK...

Longitudinal uniformity, time performances and irradiation test of pure CsI crystals

Energy Technology Data Exchange (ETDEWEB)

Angelucci, M. [Laboratori Nazionali di Frascati dell' INFN, Frascati (Italy); Atanova, O. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Baccaro, S.; Cemmi, A. [ENEA UTTMAT-IRR, Casaccia R.C., Roma (Italy); Cordelli, M. [Laboratori Nazionali di Frascati dell' INFN, Frascati (Italy); Donghia, R., E-mail: raffaella.donghia@lnf.infn.it [Laboratori Nazionali di Frascati dell' INFN, Frascati (Italy); Dipartimento di Fisica, Universitá Roma Tre, Roma (Italy); Giovannella, S.; Happacher, F.; Miscetti, S.; Sarra, I.; Soleti, S.R. [Laboratori Nazionali di Frascati dell' INFN, Frascati (Italy)

2016-07-11

To study an alternative to BaF{sub 2}, as the crystal choice for the Mu2e calorimeter, 13 pure CsI crystals from Opto Materials and ISMA producers have been characterized by determining their light yield (LY) and longitudinal response uniformity (LRU), when read with a UV extended PMT. The crystals show a LY of ~100 p.e./MeV (~150 p.e./MeV) when wrapped with Tyvek and coupled to the PMT without (with) optical grease. The LRU is well represented by a linear slope that is on average δ~ −0.6%/cm. The timing performances of the Opto Materials crystal, read with a UV extended MPPC, have been evaluated with minimum ionizing particles. A timing resolution of ~330 ps (~ 440 ps) is achieved when connecting the photosensor to the MPPC with (without) optical grease. The crystal radiation hardness to a ionization dose has also been studied for one pure CsI crystal from SICCAS. After exposing it to a dose of 900 Gy, a decrease of 33% in the LY is observed while the LRU remains unchanged.

Cognitive performance modeling based on general systems performance theory.

Science.gov (United States)

Kondraske, George V

2010-01-01

General Systems Performance Theory (GSPT) was initially motivated by problems associated with quantifying different aspects of human performance. It has proved to be invaluable for measurement development and understanding quantitative relationships between human subsystem capacities and performance in complex tasks. It is now desired to bring focus to the application of GSPT to modeling of cognitive system performance. Previous studies involving two complex tasks (i.e., driving and performing laparoscopic surgery) and incorporating measures that are clearly related to cognitive performance (information processing speed and short-term memory capacity) were revisited. A GSPT-derived method of task analysis and performance prediction termed Nonlinear Causal Resource Analysis (NCRA) was employed to determine the demand on basic cognitive performance resources required to support different levels of complex task performance. This approach is presented as a means to determine a cognitive workload profile and the subsequent computation of a single number measure of cognitive workload (CW). Computation of CW may be a viable alternative to measuring it. Various possible "more basic" performance resources that contribute to cognitive system performance are discussed. It is concluded from this preliminary exploration that a GSPT-based approach can contribute to defining cognitive performance models that are useful for both individual subjects and specific groups (e.g., military pilots).

Evaluation of material heterogeneity dosimetric effects using radiochromic film for COMS eye plaques loaded with 125I seeds (model I25.S16)

International Nuclear Information System (INIS)

Acar, Hilal; Chiu-Tsao, Sou-Tung; Özbay, İsmail; Kemikler, Gönül; Tuncer, Samuray

2013-01-01

Purpose: (1) To measure absolute dose distributions in eye phantom for COMS eye plaques with 125 I seeds (model I25.S16) using radiochromic EBT film dosimetry. (2) To determine the dose correction function for calculations involving the TG-43 formalism to account for the presence of the COMS eye plaque using Monte Carlo (MC) method specific to this seed model. (3) To test the heterogeneous dose calculation accuracy of the new version of Plaque Simulator (v5.3.9) against the EBT film data for this seed model. Methods: Using EBT film, absolute doses were measured for 125 I seeds (model I25.S16) in COMS eye plaques (1) along the plaque's central axis for (a) uniformly loaded plaques (14–20 mm in diameter) and (b) a 20 mm plaque with single seed, and (2) in off-axis direction at depths of 5 and 12 mm for all four plaque sizes. The EBT film calibration was performed at 125 I photon energy. MC calculations using MCNP5 code for a single seed at the center of a 20 mm plaque in homogeneous water and polystyrene medium were performed. The heterogeneity dose correction function was determined from the MC calculations. These function values at various depths were entered into PS software (v5.3.9) to calculate the heterogeneous dose distributions for the uniformly loaded plaques (of all four sizes). The dose distributions with homogeneous water assumptions were also calculated using PS for comparison. The EBT film measured absolute dose rate values (film) were compared with those calculated using PS with homogeneous assumption (PS Homo) and heterogeneity correction (PS Hetero). The values of dose ratio (film/PS Homo) and (film/PS Hetero) were obtained. Results: The central axis depth dose rate values for a single seed in 20 mm plaque measured using EBT film and calculated with MCNP5 code (both in ploystyrene phantom) were compared, and agreement within 9% was found. The dose ratio (film/PS Homo) values were substantially lower than unity (mostly between 0.8 and 0.9) for all

Nuclear Energy Advanced Modeling and Simulation Waste Integrated Performance and Safety Codes (NEAMS Waste IPSC).

Energy Technology Data Exchange (ETDEWEB)

Schultz, Peter Andrew

2011-12-01

The objective of the U.S. Department of Energy Office of Nuclear Energy Advanced Modeling and Simulation Waste Integrated Performance and Safety Codes (NEAMS Waste IPSC) is to provide an integrated suite of computational modeling and simulation (M&S) capabilities to quantitatively assess the long-term performance of waste forms in the engineered and geologic environments of a radioactive-waste storage facility or disposal repository. Achieving the objective of modeling the performance of a disposal scenario requires describing processes involved in waste form degradation and radionuclide release at the subcontinuum scale, beginning with mechanistic descriptions of chemical reactions and chemical kinetics at the atomic scale, and upscaling into effective, validated constitutive models for input to high-fidelity continuum scale codes for coupled multiphysics simulations of release and transport. Verification and validation (V&V) is required throughout the system to establish evidence-based metrics for the level of confidence in M&S codes and capabilities, including at the subcontiunuum scale and the constitutive models they inform or generate. This Report outlines the nature of the V&V challenge at the subcontinuum scale, an approach to incorporate V&V concepts into subcontinuum scale modeling and simulation (M&S), and a plan to incrementally incorporate effective V&V into subcontinuum scale M&S destined for use in the NEAMS Waste IPSC work flow to meet requirements of quantitative confidence in the constitutive models informed by subcontinuum scale phenomena.

Nuclear Energy Advanced Modeling and Simulation Waste Integrated Performance and Safety Codes (NEAMS Waste IPSC)

International Nuclear Information System (INIS)

Schultz, Peter Andrew

2011-01-01

The objective of the U.S. Department of Energy Office of Nuclear Energy Advanced Modeling and Simulation Waste Integrated Performance and Safety Codes (NEAMS Waste IPSC) is to provide an integrated suite of computational modeling and simulation (M and S) capabilities to quantitatively assess the long-term performance of waste forms in the engineered and geologic environments of a radioactive-waste storage facility or disposal repository. Achieving the objective of modeling the performance of a disposal scenario requires describing processes involved in waste form degradation and radionuclide release at the subcontinuum scale, beginning with mechanistic descriptions of chemical reactions and chemical kinetics at the atomic scale, and upscaling into effective, validated constitutive models for input to high-fidelity continuum scale codes for coupled multiphysics simulations of release and transport. Verification and validation (V and V) is required throughout the system to establish evidence-based metrics for the level of confidence in M and S codes and capabilities, including at the subcontiunuum scale and the constitutive models they inform or generate. This Report outlines the nature of the V and V challenge at the subcontinuum scale, an approach to incorporate V and V concepts into subcontinuum scale modeling and simulation (M and S), and a plan to incrementally incorporate effective V and V into subcontinuum scale M and S destined for use in the NEAMS Waste IPSC work flow to meet requirements of quantitative confidence in the constitutive models informed by subcontinuum scale phenomena.

I-V characteristic of electronic transport through a quantum dot chain: The role of antiresonance

International Nuclear Information System (INIS)

Liu Yu; Zheng Yisong; Gong Weijiang; Lue Tianquan

2006-01-01

The I-V spectrum of electronic transport through a quantum dot chain is calculated by means of the nonequilibrium Green function technique. In such a system, two arbitrary quantum dots are connected with two electron reservoirs through leads. When the dot-lead coupling is very weak, a series of discrete resonant peaks in electron transmission function cause staircase-like I-V characteristic. On the contrary, in the relatively strong dot-lead coupling regime, stairs in the I-V spectrum due to resonance vanish. However, when there are some dangling quantum dots in the chain outside two leads, the antiresonance which corresponds to the zero points of electron transmission function brings about novel staircase characteristic in the I-V spectrum. Moreover, two features in the I-V spectrum arising from the antiresonance are pointed out, which are significant for possible device applications. One is the multiple negative differential conductance regions, and another is regarding to create a highly spin-polarized current through the quantum dot chain by the interplay of the resonance and antiresonance. Finally, we focus on the role that the many-body effect plays on the antiresonance. Our result is that the antiresonance remains when the electron interaction is considered to the second order approximation

Generation of a gene-corrected isogenic control cell line from an Alzheimer's disease patient iPSC line carrying a A79V mutation in PSEN1

DEFF Research Database (Denmark)

Pires, Carlota; Schmid, Benjamin; Petræus, Carina

2016-01-01

mutation in PSEN1 as an in vitro disease model. Here we generated a gene-corrected version from this hiPSC line by substituting the point mutation with the wild-type sequence. The reported A79V-GC-iPSCs line is a very useful resource in combination with the A79V-iPSC line in order to study pathological...

Measurements and analysis of the {sup 127}I and {sup 129}I neutron capture and total cross sections; Mesure et analyses des sections efficaces neutroniques totales et de capture radiative des iodes 127 et 129 de 0.5 eV a 100keV

Energy Technology Data Exchange (ETDEWEB)

Noguere, G

2005-07-01

Most of the experimental work on the interaction of neutrons with matter has focused on materials important to reactor physics and reactor structures. By comparison, the corresponding data for minor actinides or long-lived fission products are poor. A significant demand has developed for improved neutron cross-section data of these little-studied nuclides due to the surge of interest in the transmutation of nuclear waste. With 400 kg of {sup 129}I produced yearly in the reactors of the EU countries and a very long {beta}{sup -} half-life of 1.57 x 10{sup 7} years, iodine requires disposal strategies that will isolate this isotope from the environment for long periods of time. Therefore, {sup 129}I is potentially a key long-lived fission product for transmutation applications, since {sup 129}I transmutes in {sup 130}I after a single neutron capture and decays to {sup 130}Xe with a 12.36 h half-life. Accurate capture cross sections would help to reduce uncertainties in waste management concepts. For that purpose, Time-Of-Flight measurements covering the [0.5 eV-100 keV] energy range have been carried out at the 150 MeV pulsed neutron source GELINA of the Institute for Reference Materials and Measurements (IRMM). Two types of experiments have been performed at the IRMM, namely capture and transmission experiments. They are respectively related to the neutron capture and total cross sections. Since the PbI{sub 2} samples used in this work contain natural and radioactive iodine, extensive measurements of {sup 129}I have been carried out under the same experimental conditions as for the {sup 129}I. The data reduction process was performed with the AGS system, and the resonance parameters were extracted with the SAMMY and REFIT shape analysis codes. In a last step, the parameters have been converted into ENDF-6 format and processed with the NJOY code to produce point-wise and multigroup cross sections, as well as MCNP and ERANOS libraries. (author)

Software reliability evaluation of digital plant protection system development process using V and V

International Nuclear Information System (INIS)

Lee, Na Young; Hwang, Il Soon; Seong, Seung Hwan; Oh, Seung Rok

2001-01-01

In the nuclear power industry, digital technology has been introduced recently for the Instrumentation and Control (I and C) of reactor systems. For its application to the safety critical system such as Reactor Protection System(RPS), a reliability assessment is indispensable. Unlike traditional reliability models, software reliability is hard to evaluate, and should be evaluated throughout development lifecycle. In the development process of Digital Plant Protection System(DPPS), the concept of verification and validation (V and V) was introduced to assure the quality of the product. Also, test should be performed to assure the reliability. Verification procedure with model checking is relatively well defined, however, test is labor intensive and not well organized. In this paper, we developed the methodological process of combining the verification with validation test case generation. For this, we used PVS for the table specification and for the theorem proving. As a result, we could not only save time to design test case but also get more effective and complete verification related test case set. Add to this, we could extract some meaningful factors useful for the reliability evaluation both from the V and V and verification combined tests

Quantification of nicotinic acetylcholine receptors in human brain using [123I]5-I-A-85380 SPET

International Nuclear Information System (INIS)

Fujita, Masahiro; Seneca, Nicholas; Innis, Robert B.; Ichise, Masanori; Tipre, Dnyanesh; DeNucci, Christopher C.; Baldwin, Ronald M.; Dyck, Christopher H. van; Tamagnan, Gilles; Bozkurt, Ali; Zoghbi, Sami S.; Mukhin, Alexey G.; Vaupel, D. Bruce; Horti, Andrew G.; Kimes, Alane S.; Iida, Hidehiro; Koren, Andrei O.; London, Edythe D.; Seibyl, John P.

2003-01-01

The purpose of this study was to assess the utility of a new single-photon emission tomography ligand, [ 123 I]5-iodo-3-[2(S)-2-azetidinylmethoxy]pyridine (5-I-A-85380), to measure regional nAChR binding in human brain. Six healthy nonsmoker subjects (two men and four women, age 33±15 years) participated in both a bolus (dose: 317±42 MBq) and a bolus plus constant infusion (dose of bolus: 98±32 MBq, B/I=6.7±2.6 h, total dose: 331±55 MBq) study. The study duration was 5-8 h and 14 h in the former and the latter, respectively. Nonlinear least-squares compartmental analysis was applied to bolus studies to calculate total (V T ') and specific (V S ') distribution volumes. A two-tissue compartment model was applied to identify V S '. V T ' was also calculated in B/I studies. In bolus studies, V T ' was well identified by both one- and two-tissue compartment models, with a coefficient of variation of less than 5% in most regions. The two-compartment model gave V T ' values of 51, 22, 27, 32, 20, 19, 20, and 17 ml cm -3 in thalamus, cerebellum, putamen, pons, and frontal, parietal, temporal, and occipital cortices, respectively. The two-compartment model did not identify V S ' well. B/I studies provided poor accuracy of V T ' measurement, possibly due to deviations from equilibrium conditions. These results demonstrate the feasibility of quantifying high-affinity type nAChRs using [ 123 I]5-I-A-85380 in humans and support the use of V T ' measured by bolus studies. (orig.)

Luthers salmer i vækkelsesbevægelsernes sang- og salmebøger 1890-2000

DEFF Research Database (Denmark)

Balslev-Clausen, Peter

2011-01-01

Artiklen gør rede for brugen af Luthers salmer i danske vækkelsesbevægelsers og ungdomsorganisationers sangbøger 1890-2000......Artiklen gør rede for brugen af Luthers salmer i danske vækkelsesbevægelsers og ungdomsorganisationers sangbøger 1890-2000...

Pelargonidin Improves Passive Avoidance Task Performance in a Rat Amyloid Beta25-35 Model of Alzheimer’s Disease Via Estrogen Receptor Independent Pathways

Directory of Open Access Journals (Sweden)

Hamid Sohanaki

2016-05-01

Full Text Available Alzheimer’s disease (AD is a disorder with multiple pathophysiological causes, destructive outcomes, and no available definitive cure. Pelargonidin (Pel, an anthocyanin derivative, is an estrogen receptor agonist with little estrogen side effects. This study was designed to assess Pel memory enhancing effects on the a rat Amyloid Beta25-35 (Aβ intrahippocampal microinjections model of AD in the passive avoidance task performance paradigm and further evaluate the potential estrogen receptor role on the memory-evoking compound. Equally divided rats were assigned to 5 groups of sham, Aβ intrahippocampal microinjected, Pel pretreated (10 mg/kg; P.O, α estrogen antagonist intra-cerebrovascular (i.c.v. microinjected, and β estrogen antagonist (i.c.v microinjected animals. Intrahippocampal microinjections of Aβ were adopted to provoke AD model. Passive avoidance task test was also used to assess memory performance. Pel pretreatment prior to Aβ microinjections significantly improved step-through latency (P<0.001 in passive avoidance test. In α and β estrogen, antagonists received animals, passive avoidance task performance was not statistically changed (P=0.11 & P=0.41 respectively compared to Pel pretreated and sham animals. Our results depicted that Pel improves Aβ induced memory dysfunction in passive avoidance test performance through estrogen receptor independently related pathways.

Crack-tip chemistry modeling of stage I stress corrosion cracking

International Nuclear Information System (INIS)

Jones, R.H.; Simonen, E.P.

1991-10-01

Stage I stress corrosion cracking usually exhibits a very strong K dependence with Paris law exponents of up to 30. 2 Model calculations indicate that the crack velocity in this regime is controlled by transport through a salt film and that the K dependence results from crack opening controlled salt film dissolution. An ionic transport model that accounts for both electromigration through the resistive salt film and Fickian diffusion through the aqueous solution was used for these predictions. Predicted crack growth rates are in excellent agreement with measured values for Ni with P segregated to the grain boundaries and tested in IN H 2 SO 4 at +900 mV. This salt film dissolution may be applicable to stage I cracking of other materials

http://dx.doi.org/10.4314/ajtcam.v10i4.8

African Journals Online (AJOL)

AJTCAM

http://dx.doi.org/10.4314/ajtcam.v10i4.8. 47. DIMETHOXYFLAVONE ISOLATED FROM THE STEM BARK OF STEREOSPERMUM KUNTHIANUM POSSESSES. ANTIDIARRHOEAL ACTIVITY IN RODENTS. Ching, F. P.1*, Otokiti, I. O.2 and Egert-omoneukanrin, B.2. 1*Department of Pharmacology, Faculty of Basic Medical ...

Risky module prediction for nuclear I and C software

International Nuclear Information System (INIS)

Kim, Young Mi; Kim, Hyeon Soo

2012-01-01

As software based digital I and C (Instrumentation and Control) systems are used more prevalently in nuclear plants, enhancement of software dependability has become an important issue in the area of nuclear I and C systems. Critical attributes of software dependability are safety and reliability. These attributes are tightly related to software failures caused by faults. Software testing and V and V (Verification and Validation) activities are hence important for enhancing software dependability. If the risky modules of safety-critical software can be predicted, it will be possible to focus on testing and V and V activities more efficiently and effectively. It should also make it possible to better allocate resources for regulation activities. We propose a prediction technique to estimate risky software modules by adopting machine learning models based on software complexity metrics. An empirical study with various machine learning algorithms was executed for comparing the prediction performance. Experimental results show SVMs (Support Vector Machines) perform as well or better than the other methods.

The Effect of Solvents on the Performance of CH3NH3PbI3 Perovskite Solar Cells

Directory of Open Access Journals (Sweden)

Pao-Hsun Huang

2017-04-01

Full Text Available The properties of perovskite solar cells (PSCs fabricated using various solvents was studied. The devices had an indium tin oxide (ITO/poly(3,4-ethylenedioxythiophene: poly(styrenesulfonate (PEDOT:PSS/CH3NH3PbI3 (fabricated by using various solvents/fullerene (C60/bathocuproine (BCP/silver (Ag structure. The solvents used were dimethylformamide (DMF, γ-butyrolactone (GBL, dimethyl sulfoxide (DMSO, a mixture of DMSO and DMF (1:1 v/v, and a mixture of DMSO and GBL (DMSO: GBL, 1:1 v/v, respectively. The power conversion efficiency (PCE of the device fabricated using DMF is zero, which is attributed to the poor coverage of CH3NH3PbI3 film on the substrate. In addition, the PCE of the device made using GBL is only 1.74% due to the low solubility of PbI2 and CH3NH3I. In contrast, the PCE of the device fabricated using the solvents containing DMSO showed better performance. This is ascribed to the high solubilization properties and strong coordination of DMSO. As a result, a PCE of 9.77% was obtained using a mixed DMSO:GBL solvent due to the smooth surface, uniform film coverage on the substrate and the high crystallization of the perovskite structure. Finally, a mixed DMSO: DMF:GBL (5:2:3 v/v/v solvent that combined the advantages of each solvent was used to fabricate a device, leading to a further improvement of the PCE of the resulting PSC to 10.84%.

Nonlinear I-V characteristics of doped SnO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Dhage, S.R.; Choube, Vandana; Ravi, V

2004-07-15

When tin oxide is doped with Sb{sub 2}O{sub 3} and CoO, it shows highly nonlinear current (I)-voltage (V) characteristics. Addition of CoO leads to creation of oxygen vacancies and helps in sintering of SnO{sub 2}. Antimony oxide acts as a donor and increases the conductivity. The results are nearly same when antimony oxide is replaced by tantalum oxide. The grain size of these sintered ceramics varies from 5 to 7 {mu}m and the grain boundary barrier height (PHI{sub B}) is in the range of 0.5 eV. The observed nonlinear coefficient ({alpha}) is 25 and 27 for antimony and tantalum oxide, respectively and the breakdown field is in the range of 1250 V cm{sup -1}.

Mutation I136V alters electrophysiological properties of the NaV1.7 channel in a family with onset of erythromelalgia in the second decade

Directory of Open Access Journals (Sweden)

Dib-Hajj Sulayman D

2008-01-01

Full Text Available Abstract Background Primary erythromelalgia is an autosomal dominant pain disorder characterized by burning pain and skin redness in the extremities, with onset of symptoms during the first decade in the families whose mutations have been physiologically studied to date. Several mutations of voltage-gated Na+ channel NaV1.7 have been linked with primary erythromelalgia. Recently, a new substitution NaV1.7/I136V has been reported in a Taiwanese family, in which pain appeared at later ages (9–22 years, with onset at 17 years of age or later in 5 of 7 family members, with relatively slow progression (8–10 years to involvement of the hands. The proband reported onset of symptoms first in his feet at the age of 11, which then progressed to his hands at the age of 19. The new mutation is located in transmembrane segment 1 (S1 of domain I (DI in contrast to all NaV1.7 mutations reported to date, which have been localized in the voltage sensor S4, the linker joining segments S4 and S5 or pore-lining segments S5 and S6 in DI, II and III. Results In this study, we characterized the gating and kinetic properties of I136V mutant channels in HEK293 cells using whole-cell patch clamp. I136V shifts the voltage-dependence of activation by -5.7 mV, a smaller shift in activation than the other erythromelalgia mutations that have been characterized. I136V also decreases the deactivation rate, and generates larger ramp currents. Conclusion The I136V substitution in NaV1.7 alters channel gating and kinetic properties. Each of these changes may contribute to increased excitability of nociceptive dorsal root ganglion neurons, which underlies pain in erythromelalgia. The smaller shift in voltage-dependence of activation of NaV1.7, compared to the other reported cases of inherited erythromelalgia, may contribute to the later age of onset and slower progression of the symptoms reported in association with this mutation.

Empirical STORM-E Model. [I. Theoretical and Observational Basis

Science.gov (United States)

Mertens, Christopher J.; Xu, Xiaojing; Bilitza, Dieter; Mlynczak, Martin G.; Russell, James M., III

2013-01-01

Auroral nighttime infrared emission observed by the Sounding of the Atmosphere using Broadband Emission Radiometry (SABER) instrument onboard the Thermosphere-Ionosphere-Mesosphere Energetics and Dynamics (TIMED) satellite is used to develop an empirical model of geomagnetic storm enhancements to E-region peak electron densities. The empirical model is called STORM-E and will be incorporated into the 2012 release of the International Reference Ionosphere (IRI). The proxy for characterizing the E-region response to geomagnetic forcing is NO+(v) volume emission rates (VER) derived from the TIMED/SABER 4.3 lm channel limb radiance measurements. The storm-time response of the NO+(v) 4.3 lm VER is sensitive to auroral particle precipitation. A statistical database of storm-time to climatological quiet-time ratios of SABER-observed NO+(v) 4.3 lm VER are fit to widely available geomagnetic indices using the theoretical framework of linear impulse-response theory. The STORM-E model provides a dynamic storm-time correction factor to adjust a known quiescent E-region electron density peak concentration for geomagnetic enhancements due to auroral particle precipitation. Part II of this series describes the explicit development of the empirical storm-time correction factor for E-region peak electron densities, and shows comparisons of E-region electron densities between STORM-E predictions and incoherent scatter radar measurements. In this paper, Part I of the series, the efficacy of using SABER-derived NO+(v) VER as a proxy for the E-region response to solar-geomagnetic disturbances is presented. Furthermore, a detailed description of the algorithms and methodologies used to derive NO+(v) VER from SABER 4.3 lm limb emission measurements is given. Finally, an assessment of key uncertainties in retrieving NO+(v) VER is presented

A mathematical modeling framework to evaluate the performance of single diode and double diode based SPV systems

Directory of Open Access Journals (Sweden)

Sangram Bana

2016-11-01

Full Text Available In order to predict the performance of a PV system, a reliable and accurate simulation design of PV systems before being installed is a necessity. The present study concerns the development of single and double diode model of solar PV system and ensures the best suited model under specific environmental condition for accurate performance prediction. The information provided in the manufacturers’ data sheet is not sufficient for developing a Simulink based single and double diode models of PV module. These parameters are crucial to predict accurate performance of a PV module. These parameters of the proposed solar PV models have been calculated using an efficient iterative technique. This paper compares the simulation results of both the models with manufacturer’s data sheet to investigate the accuracy and validity. A MATLAB/Simulink based comparative performance analysis of these models under inconsistent atmospheric conditions and the effect of variations in model parameters has been carried out. Despite the simplicity, these models are highly sensitive and respond to a slight variation in temperature and insolation. It is observed that double diode PV model is more accurate under low intensity insolation or shading condition. The performance evaluation of the models under present study will be helpful to understand the I-V curves, which will enable us in predicting the solar PV system power production under variable input conditions.

Online dynamical downscaling of temperature and precipitation within the iLOVECLIM model (version 1.1

Directory of Open Access Journals (Sweden)

A. Quiquet

2018-02-01

Full Text Available This paper presents the inclusion of an online dynamical downscaling of temperature and precipitation within the model of intermediate complexity iLOVECLIM v1.1. We describe the following methodology to generate temperature and precipitation fields on a 40 km  ×  40 km Cartesian grid of the Northern Hemisphere from the T21 native atmospheric model grid. Our scheme is not grid specific and conserves energy and moisture in the same way as the original climate model. We show that we are able to generate a high-resolution field which presents a spatial variability in better agreement with the observations compared to the standard model. Although the large-scale model biases are not corrected, for selected model parameters, the downscaling can induce a better overall performance compared to the standard version on both the high-resolution grid and on the native grid. Foreseen applications of this new model feature include the improvement of ice sheet model coupling and high-resolution land surface models.

Kas BRICS-i pank suudab võistelda IMF-iga? / Mark Adomanis

Index Scriptorium Estoniae

Adomanis, Mark

2014-01-01

Suurte tärkavate turgude e. BRICS-i riikide pank on katse tasakaalustada suurenevat lõhet areneva maailma majandusliku võimsuse ja tema mõjuvõimu vahel rahvusvahelistele rahandusorganisatsioonidele, nagu IMF ja Maailmapank

Ab initio I-V characteristics of short C-20 chains

DEFF Research Database (Denmark)

Roland, C.; Larade, B.; Taylor, Jeremy Philip

2002-01-01

We have calculated the I-V characteristics of short chains of C-20 molecular cages between Al and Au leads with an ab initio formalism. The results indicate that a linear chain of such molecules acts primarily as metallic nanowires. The transmission, however, depends sensitively both...

I-V and C-V Characterization of a High-Responsivity Graphene/Silicon Photodiode with Embedded MOS Capacitor

OpenAIRE

Luongo, Giuseppe; Giubileo, Filippo; Genovese, Luca; Iemmo, Laura; Martucciello, Nadia; Di Bartolomeo, Antonio

2017-01-01

We study the effect of temperature and light on the I-V and C-V characteristics of a graphene/silicon Schottky diode. The device exhibits a reverse-bias photocurrent exceeding the forward current and achieves a photoresponsivity as high as 2.5 ? A / W . We show that the enhanced photocurrent is due to photo-generated carriers injected in the graphene/Si junction from the parasitic graphene/SiO2/Si capacitor connected in parallel to the diode. The same mechanism can occur with thermally genera...

Stellar laboratories . IX. New Se v, Sr iv-vii, Te vi, and I vi oscillator strengths and the Se, Sr, Te, and I abundances in the hot white dwarfs G191-B2B and RE 0503-289

Science.gov (United States)

Rauch, T.; Quinet, P.; Knörzer, M.; Hoyer, D.; Werner, K.; Kruk, J. W.; Demleitner, M.

2017-10-01

Context. To analyze spectra of hot stars, advanced non-local thermodynamic equilibrium (NLTE) model-atmosphere techniques are mandatory. Reliable atomic data is crucial for the calculation of such model atmospheres. Aims: We aim to calculate new Sr iv-vii oscillator strengths to identify for the first time Sr spectral lines in hot white dwarf (WD) stars and to determine the photospheric Sr abundances. To measure the abundances of Se, Te, and I in hot WDs, we aim to compute new Se v, Te vi, and I vi oscillator strengths. Methods: To consider radiative and collisional bound-bound transitions of Se v, Sr iv - vii, Te vi, and I vi in our NLTE atmosphere models, we calculated oscillator strengths for these ions. Results: We newly identified four Se v, 23 Sr v, 1 Te vi, and three I vi lines in the ultraviolet (UV) spectrum of RE 0503-289. We measured a photospheric Sr abundance of 6.5+ 3.8-2.4× 10-4 (mass fraction, 9500-23 800 times solar). We determined the abundances of Se (1.6+ 0.9-0.6× 10-3, 8000-20 000), Te (2.5+ 1.5-0.9× 10-4, 11 000-28 000), and I (1.4+ 0.8-0.5× 10-5, 2700-6700). No Se, Sr, Te, and I line was found in the UV spectra of G191-B2B and we could determine only upper abundance limits of approximately 100 times solar. Conclusions: All identified Se v, Sr v, Te vi, and I vi lines in the UV spectrum of RE 0503-289 were simultaneously well reproduced with our newly calculated oscillator strengths. Based on observations with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS5-26666. Based on observations made with the NASA-CNES-CSA Far Ultraviolet Spectroscopic Explorer. Full Tables A.15 to A.21 are only available via the German Astrophysical Virtual Observatory (GAVO) service TOSS (http://dc.g-vo.org/TOSS).

Simulation of I-V and C-V curves of metal/GaN/AlGaN/GaN heterostructures with trap-assisted tunnelling

International Nuclear Information System (INIS)

Racko, J.; Benko, P.; Grmanova, A.; Harmatha, L.; Breza, J.; Granzner, R.; Schwierz, F.

2013-01-01

The described trap-assisted tunnelling (TAT) model of the metal/GaN/Al_xGaN_1_-_x/GaN structure allows analyzing the effect of deep traps upon I-V and C-V characteristics. The negative charge with magnitude proportional to the molar concentration of aluminium gives rise to a barrier at the first heterojunction, which is higher than the Schottky barrier at the metal/GaN interface. On increasing the reverse bias Va the barrier at the first heterojunction is getting lower. The drop of this barrier causes an exponential increase of the reverse current. The current saturates, when the first heterojunction barrier is lower than the Schottky barrier. The effect of TAT can be observed also on varying the parameters of the band of traps. The shape of the simulated C-V curve is affected by changes in the charge on the second heterojunction. In principle it reflects the decrease of electron concentration in the quantum well on increasing the reverse bias V_a. The space charge region becomes wider and the electron concentration at the second heterojunction falls below the concentration of ionized deep trapping centres, which manifests itself as a noticeable drop in the capacitance of the metal/GaN/Al_xGaN_1_-_x/GaN structure. (authors)

TeV scale resonant leptogenesis from supersymmetry breaking

International Nuclear Information System (INIS)

Hambye, Thomas; March-Russell, John; West, Stephen M.

2004-01-01

We propose a model of TeV-scale resonant leptogenesis based upon recent models of the generation of light neutrino masses from supersymmetry-breaking effects with TeV-scale right-handed (rhd) neutrinos, N i . The model leads to naturally large cosmological lepton asymmetries via the resonant behaviour of the one-loop self-energy contribution to N i decay. Our model addresses the primary problems of previous phenomenological studies of low-energy leptogenesis: a rational for TeV-scale rhd neutrinos with small Yukawa couplings so that the out-of equilibrium condition for N i decay is satisfied; the origin of the tiny, but non-zero mass splitting required between at least two N i masses; and the necessary non-trivial breaking of flavour symmetries in the rhd neutrino sector. The low mass-scale of the rhd neutrinos and their super partners, and the TeV-scale A-terms automatically contained within the model offer opportunities for partial direct experimental tests of this leptogenesis mechanism at future colliders. (author)

Charge-coupled-device X-ray detector performance model

Science.gov (United States)

Bautz, M. W.; Berman, G. E.; Doty, J. P.; Ricker, G. R.

1987-01-01

A model that predicts the performance characteristics of CCD detectors being developed for use in X-ray imaging is presented. The model accounts for the interactions of both X-rays and charged particles with the CCD and simulates the transport and loss of charge in the detector. Predicted performance parameters include detective and net quantum efficiencies, split-event probability, and a parameter characterizing the effective thickness presented by the detector to cosmic-ray protons. The predicted performance of two CCDs of different epitaxial layer thicknesses is compared. The model predicts that in each device incomplete recovery of the charge liberated by a photon of energy between 0.1 and 10 keV is very likely to be accompanied by charge splitting between adjacent pixels. The implications of the model predictions for CCD data processing algorithms are briefly discussed.

Performance'i-kunsti taak / Mai Sööt

Index Scriptorium Estoniae

Sööt, Mai

2010-01-01

EAST Galeriis 1. oktoobril toimunud üritusest "Servataguse Muusika seikleb performance'i-kunstiga". Pikemalt Roi Vaara ja Ville-Karel Viirelaiu performance'itest. Iganenud radikaalsuse ja vastuhaku motiividel töötavast performance'ist. Performance'i-kunsti kuulumisest kord kujutava kunsti kord näitekunsti alla. Võimalusest õppida tegevuskunsti Eesti Kunstiakadeemias

Evaluation of resting brain conditions measured by two different methods (i.v. and oral administration) with {sup 18}F-FDG-PET

Energy Technology Data Exchange (ETDEWEB)

Masud, M.; Yamaguchi, Keiichiro; Rikimaru, Hisashi; Tashiro, Manabu; Ozaki, Kaoru; Watanuki, Shoichi; Miyake, Masayasu; Ido, Tatsuo; Itoh, Masatoshi [Tohoku Univ., Sendai (Japan). Cyclotron and Radioisotope Center

2001-02-01

Our aim was to evaluate regional differences between brain activity in two resting control conditions measured by 3D PET after administration of FDG through either the intravenous (i.v.) or the oral route. Ten healthy male volunteers engaged in the study as the i.v. group (mean age, 26{+-}9.3 years, {+-}S.D.) who received FDG intravenously and another 10 volunteers as the oral group (mean age, 27.9{+-}11.3 years, {+-}S.D.) who received FDG per os. A set of 3D-PET scans (emission and transmission scans) were performed in both groups. To explore possible functional differences between the brains of the two groups, the SPM-96 software was used for statistical analysis. The results revealed that glucose metabolism was significantly higher in the superior frontal gyrus, superior parietal lobule, lingual gyrus and left cerebellar hemisphere in the i.v. group than in the oral group. Metabolically active areas were found in the superior, middle and inferior temporal gyrus, parahippocampal gyrus, amygdaloid nucleus, pons and cerebellum in the oral group when compared with the i.v. group. These differences were presumably induced by differences between FDG kinetics and/or time-weighted behavioral effects in the two studies. This study suggests the need for extreme caution when selecting a pooled control population for designated activation studies. (author)

Spectral analysis of the UFBG-based acousto—optical modulator in V-I transmission matrix formalism

Science.gov (United States)

Wu, Liang-Ying; Pei, Li; Liu, Chao; Wang, Yi-Qun; Weng, Si-Jun; Wang, Jian-Shuai

2014-11-01

In this study, the V-I transmission matrix formalism (V-I method) is proposed to analyze the spectrum characteristics of the uniform fiber Bragg grating (FBG)-based acousto—optic modulators (UFBG-AOM). The simulation results demonstrate that both the amplitude of the acoustically induced strain and the frequency of the acoustic wave (AW) have an effect on the spectrum. Additionally, the wavelength spacing between the primary reflectivity peak and the secondary reflectivity peak is proportional to the acoustic frequency with the ratio 0.1425 nm/MHz. Meanwhile, we compare the amount of calculation. For the FBG whose period is M, the calculation of the V-I method is 4 × (2M-1) in addition/subtraction, 8 × (2M - 1) in multiply/division and 2M in exponent arithmetic, which is almost a quarter of the multi-film method and transfer matrix (TM) method. The detailed analysis indicates that, compared with the conventional multi-film method and transfer matrix (TM) method, the V-I method is faster and less complex.

Current percolation and the V-I transition in YBa{sub 2}Cu{sub 3}O{sub 7} bicrystals and granular coated conductors

Energy Technology Data Exchange (ETDEWEB)

Evetts, J E; Hogg, M J; Glowacki, B A; Rutter, N A; Tsaneva, V N [Department of Materials Science and IRC in Superconductivity, University of Cambridge, Cambridge CB2 3QZ (United Kingdom)

1999-07-01

There is considerable interest in the dynamics of vortices in granular 'coated conductors' consisting of a 2D network of low angle grain boundaries (LAGBs). The V-I characteristic of the conductor is determined by a combination of flux vortex channelling along the grain boundaries and current percolation within the grain network.In this work it is shown that measurements of viscous flow for a YBa{sub 2}Cu{sub 3}O{sub 7} bicrystal LAGB can be applied in a statistical model that predicts the characteristic V-I response for a particular grain-to-grain dispersion of grain boundary angles. (author)

Two-compartment model for transport of /sup 131/I via the pasture-cow-milk pathway

Energy Technology Data Exchange (ETDEWEB)

Shaeffer, D L [BDM Corp., Albuquerque, NM (USA)

1981-07-01

A two-compartment linear systems model has been developed for predicting the transport of /sup 131/I from pasture to milk. The system transfer parameters were determined from previous measurements of concentration of /sup 131/I in vegetation, K/sub v/ (pCi.kg/sup -1/ dry weight), and in milk, C/sub m/ (pCi.l/sup -1/) at the Monticello and Dresden nuclear power stations. These measurements indicated that the vegetation was being pulsed in time with deposits of radioactivity as a result of the action of atmospheric wet processes. Model predictions of the ratio of equilibrium values of C/sub m/ and K/sub v/ obtained from average model parameter values were 0.19 kg.l/sup -1/ for both Monticello and Dresden. This value was higher by factors of 1.5 and 2.8, respectively, than the time-averaged values of the ratio C/sub m//K/sub v/ previously reported. Data measured under pulsed conditions may be used for assessing long-term releases of radioactivity to the environment provided the data are properly time-averaged.

I.C.F. program at Cel-V

International Nuclear Information System (INIS)

Andre, M.; Coutant, J.; Dautray, R.; Decoster, A.; Decroisette, M.; Duborgel, B.; Ouvry, J.; Ovadia, J.; Watteau, J.P.

1990-01-01

The principal objective of the CEL-V laser program is to realize high performances ablative implosions. The indirect drive approach has been chosen to reach the high degree of uniformity required. In relation to this objective, the radiation transfer and the development of hydrodynamics instabilities are widely studied. Besides, efforts have been developed in the field of diagnostics, and of laser technology with optical smoothing and high damage level coatings studies

Performance of a high-resolution CsI(Tl)-PIN readout detector

International Nuclear Information System (INIS)

Kudenko, Yu.G.; Imazato, J.

1992-10-01

A study of a large-volume CsI(Tl) detector with a PIN diode readout was carried out. Our results show a light output of ≤20000 photoelectrons/MeV, an equivalent noise charge (rms) of about 900 electrons, and an equivalent noise level of ≤ 60 keV. We obtained an energy resolution of 11.2% (fwhm) for 1275 keV gamma rays from a 22 Na source. The characteristics of the PIN - preamplifier system as well as the parameters of a small CsI(Tl) - PIN detector with a direct and wavelength shifter readout are also reported. (author)

SURVEY ON V. CHOLERAE, V. VULNIFICUS AND V. PARAHAEMOLYTICUS IN BIVALVE MOLLUSCS OF THE ADRIATIC SEA AND PROPOSAL OF AN ANALYTICAL PROTOCOL

Directory of Open Access Journals (Sweden)

M.L. Valeri

2009-06-01

Full Text Available Bivalve molluscs from Adriatic sea were analyzed for V. parahaemolyticus, V. cholerae e V. vulnificus presence. The isolates on TCBS Agar and m-CPC Agar were selected on the basis of a new biochemical screening, that showed a good performance, because among 2344 strains from primary culture only 237 (10% were presumptively assigned to the species of interest. The PCR analyses was performed for the target genes toxR hlyA, ctxA, tcpI (V. cholerae, toxR, tl, tdh, trh (V. parahaemolyticus, vvhA and viuB (V. vulnificus. Among the 9 strains confirmed to belong to V. parahaemolyticus specie, 6 were sucrose positive. On 215 samples of molluscs only 5 resulted positive for V. parahaemolyticus being toxR+, tl+, although non pathogenic (tdh-, trh-, and none for V. cholerae e V. vulnificus.

Hole-transport limited S-shaped I-V curves in planar heterojunction organic photovoltaic cells

Science.gov (United States)

Zhang, Minlu; Wang, Hui; Tang, C. W.

2011-11-01

Current-voltage (I-V) characteristics of planar heterojunction organic photovoltaic cells based on N',N'-Di-[(1-naphthyl)-N',N'-diphenyl]-1,1'-biphenyl)-4,4'-diamine (NPB) and C60 are investigated. Through variation of the layer thickness and composition, specifically chemical doping NPB with MoOx, we show that the hole-transport limitation in the NPB layer is the determining factor in shaping the I-V characteristics of NPB/C60 cells.

Mathematical modeling of photovoltaic thermal PV/T system with v-groove collector

Science.gov (United States)

Zohri, M.; Fudholi, A.; Ruslan, M. H.; Sopian, K.

2017-07-01

The use of v-groove in solar collector has a higher thermal efficiency in references. Dropping the working heat of photovoltaic panel was able to raise the electrical efficiency performance. Electrical and thermal efficiency were produced by photovoltaic thermal (PV/T) system concurrently. Mathematical modeling based on steady-state thermal analysis of PV/T system with v-groove was conducted. With matrix inversion method, the energy balance equations are explained by means of the investigative method. The comparison results show that in the PV/T system with the V-groove collector is higher temperature, thermal and electrical efficiency than other collectors.

HSP v2: Haptic Signal Processing with Extensions for Physical Modeling

DEFF Research Database (Denmark)

Overholt, Daniel; Kontogeorgakopoulos, Alexandros; Berdahl, Edgar

2010-01-01

The Haptic Signal Processing (HSP) platform aims to enable musicians to easily design and perform with digital haptic musical instruments [1]. In this paper, we present some new objects introduced in version v2 for modeling of musical dynamical systems such as resonators and vibrating strings. To....... To our knowledge, this is the first time that these diverse physical modeling elements have all been made available for a modular, real-time haptics platform....

A physically based compact I-V model for monolayer TMDC channel MOSFET and DMFET biosensor.

Science.gov (United States)

Rahman, Ehsanur; Shadman, Abir; Ahmed, Imtiaz; Khan, Saeed Uz Zaman; Khosru, Quazi D M

2018-06-08

In this work, a compact transport model has been developed for monolayer transition metal dichalcogenide (TMDC) channel MOSFET. The analytical model solves the Poisson's equation for the inversion charge density to get the electrostatic potential in the channel. Current is then calculated by solving the drift-diffusion equation. The model makes gradual channel approximation to simplify the solution procedure. The appropriate density of states obtained from the first principle density functional theory simulation has been considered to keep the model physically accurate for monolayer TMDC channel FET. The outcome of the model has been benchmarked against both experimental and numerical quantum simulation results with the help of a few fitting parameters. Using the compact model, detailed output and transfer characteristics of monolayer WSe 2 FET have been studied, and various performance parameters have been determined. The study confirms excellent ON and OFF state performances of monolayer WSe 2 FET which could be viable for the next generation high-speed, low power applications. Also, the proposed model has been extended to study the operation of a biosensor. A monolayer MoS 2 channel based dielectric modulated FET is investigated using the compact model for detection of a biomolecule in a dry environment.

Anti-slamming bulbous bow and tunnel stern applications on a novel Deep-V catamaran for improved performance

Directory of Open Access Journals (Sweden)

Mehmet Atlar

2013-06-01

Full Text Available While displacement type Deep-V mono hulls have superior seakeeping behaviour at speed, catamarans typically have modest behaviour in rough seas. It is therefore a logical progression to combine the superior seakeeping performance of a displacement type Deep-V mono-hull with the high-speed benefits of a catamaran to take the advantages of both hull forms. The displacement Deep-V catamaran concept was developed in Newcastle University and Newcastle University's own multi-purpose research vessel, which was launched in 2011, pushed the design envelope still further with the successful adoption of a novel anti-slamming bulbous bow and tunnel stern for improved efficiency. This paper presents the hullform development of this unique vessel to understand the contribution of the novel bow and stern features on the performance of the Deep-V catamaran. The study is also a further validation of the hull resistance by using advanced numerical analysis methods in conjunction with the model test. An assessment of the numerical predictions of the hull resistance is also made against physical model test results and shows a good agreement between them.

Elucidating PID Degradation Mechanisms and In Situ Dark I-V Monitoring for Modeling Degradation Rate in CdTe Thin-Film Modules

DEFF Research Database (Denmark)

Hacke, Peter; Spataru, Sergiu; Johnston, Steve

2016-01-01

A progression of potential-induced degradation (PID) mechanisms are observed in CdTe modules, including shunting/junction degradation and two different manifestations of series resistance depending on the stress level and water ingress. The dark I-V method for in-situ characterization of Pmax bas...

40 CFR 60.4405 - How do I perform the initial performance test if I have chosen to install a NOX-diluent CEMS?

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 6 2010-07-01 2010-07-01 false How do I perform the initial... § 60.4405 How do I perform the initial performance test if I have chosen to install a NOX-diluent CEMS... of nine RATA reference method runs, with a minimum time per run of 21 minutes, at a single load level...

i'and.

African Journals Online (AJOL)

cr:it.i.cat·'issue. for- maintaining mismanagement can result in -~ (6f increasing) per crilpi~. fo9d ..... proportion' of ·esti'ma-:i;etl a·.ferage . yield for:. the significantly low to justify their indusion '':ir~ the modified: model. The major crops inc.luded in the - model are maize(m) f;:a!?!i~v~ · and vegetatlles(g). · ta@ ___ ~p$ight ...

Oxidation performance of V-Cr-Ti alloys

International Nuclear Information System (INIS)

Natesan, K.; Uz, M.

2000-01-01

Vanadium-base alloys are being considered as candidates for the first wall in advanced V-Li blanket concepts in fusion reactor systems. However, a primary deterrent to the use of these alloys at elevated temperatures is their relatively high affinity for interstitial impurities, i.e., O, N, H, and C. The authors conducted a systematic study to determine the effects of time, temperature, and oxygen partial pressure (pO 2 ) in the exposure environment on O uptake, scaling kinetics, and scale microstructure in V-(4--5) wt.% Cr-(4--5) wt.% Ti alloys. Oxidation experiments were conducted on the alloys at pO 2 in the range of 5 x 10 -6 -760 torr (6.6 x 10 -4 -1 x 10 5 Pa) at several temperatures in the range of 350--700 C. Models that describe the oxidation kinetics, oxide type and thickness, alloy grain size, and depth of O diffusion in the substrate of the two alloys were determined and compared. Weight change data were correlated with time by a parabolic relationship. The parabolic rate constant was calculated for various exposure conditions and the temperature dependence of the constant was described by an Arrhenius relationship. The results showed that the activation energy for the oxidation process is fairly constant at pO 2 levels in the range of 5 x 10 -6 -0.1 torr. The activation energy calculated from data obtained in the air tests was significantly lower, whereas that obtained in pure-O tests (at 760 torr) was substantially higher than the energy obtained under low-pO 2 conditions. The oxide VO 2 was the predominant phase that formed in both alloys when exposed to pO 2 levels of 6.6 x 10 -4 to 0.1 torr. V 2 O 5 was the primary phase in specimens exposed to air and to pure O 2 at 760 torr. The implications of the increased O concentration are increased strength and decreased ductility of the alloy. However, the strength of the alloy was not a strong function of the O concentration of the alloy, but an increase in O concentration did cause a substantial decrease

CCR2 V64I polymorphism in rifampicin resistant tuberculosis patients in Moewardi General Hospital Surakarta, Indonesia

Science.gov (United States)

Marwoto; Agung Prasetyo, Afiono; Reviono; Suradi

2018-05-01

CC chemokine receptor-2 (CCR2) play important roles in inflammation. The CCR2 V64I polymorphism already reported associated with many diseases; however, the association of CCR2 V64I polymorphism with tuberculosis is still unknown. Also, there is no report about the presentation of CCR2 V64I polymorphisms in Indonesian tuberculosis patients with rifampicin-mono resistant status has ever been published, to the best of our knowledge. This study evaluated the presence of CCR2 V64I polymorphisms in Javanese rifampicin-mono resistant tuberculosis patients. In an ongoing molecular epidemiology study of human genomic polymorphisms and infection, 51 Javanese rifampicin-mono resistant tuberculosis patients in Dr. Moewardi General Hospital in Surakarta were enrolled in the study. The blood samples were aliquoted and fractionated. The nucleic acids were extracted from all blood samples and subjected to the CCR2 V64I polymorphisms detection by a polymerase chain reaction-sequence-specific primer (PCR-SSP) technique. PCR products were analyzed in 3% agarose. CCR2 64V and 64I homozygote were found in 23.5% (12/51) and 23.5% (12/51) blood samples, respectively. The CCR2 VI genotype was found in 52.9% (27/51) blood samples. The CCR2 VI genotype was found predominant in Javanese rifampicin-mono resistant tuberculosis patients and may have anassociation with the clinical progression.

Gitterspær i boltede tyndpladeprofiler til væksthuse

DEFF Research Database (Denmark)

Skov, K.; Ellum, J.C.

Publikationen beskriver beregningsmetoderne for væksthusets bærende konstruktion, der er udformet således, at den direkte kan erstatte den traditionelle bærende konstruktion i danske standardvæksthuse med en spændvidde på 20 m. Publikationen henvender sig til alle med interesse for udformning af ...

30 CFR 57.22208 - Auxiliary fans (I-A, II-A, III, and V-A mines).

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Auxiliary fans (I-A, II-A, III, and V-A mines... fans (I-A, II-A, III, and V-A mines). (a) Auxiliary fans, except fans used in shops and other areas... applicable requirements of 30 CFR part 18, and be operated so that recirculation is minimized. Auxiliary fans...

Differences in strength and speed demands between 4v4 and 8v8 small-sided football games

DEFF Research Database (Denmark)

Rebelo, António Natal Campos; Silva, Pedro; Rago, Vincenzo

2016-01-01

The aims of this study were (i) to characterise the acceleration demands of two different formats of small-sided game (SSG), i.e., 4v4 + goalkeepers (4v4 + GK) and 8v8 + goalkeepers (8v8 + GK); (ii) to analyse the correlation between performance in power-based tests and acceleration-based physica...... to repetitions and fatigue development of muscle power-based actions than 8v8 + GK. It may therefore be logical to use the former type of SSG to target development of power-related football actions....

Advanced In Situ I-V Measurements Used in the Study of Porous Structures Growth on Silicon

Directory of Open Access Journals (Sweden)

Amare Benor

2017-01-01

Full Text Available The rate of oxide formation during growth of pores structures on silicon was investigated by in situ I-V measurements. The measurements were designed to get two I-V curves in a short time (total time for the two measurements was 300 seconds taking into account the gap (in mA/cm2 for each corresponding voltage. The in situ I-V measurements were made at different pore depth/time, at the electrolyte-pore tip interface, while etching takes place based on p-type Si. The results showed increasing, decreasing, and constant I-V gap in time, for macropores, nanopores, and electropolishing regimes, respectively. This was related to the expected diffusion limitation of oxide forming (H2O molecules reaching the electrolyte-pore tip and the anodizing current, while etching takes place. The method can be developed further and has the potential to be applied in other electrochemically etched porous semiconductor materials.

Quantification of nicotinic acetylcholine receptors in human brain using [{sup 123}I]5-I-A-85380 SPET

Energy Technology Data Exchange (ETDEWEB)

Fujita, Masahiro; Seneca, Nicholas; Innis, Robert B. [Molecular Imaging Branch, National Inst. of Mental Health, Building 1, Room B3-10, 1 Center Drive, MSC-0135, Bethesda, MD 20892-0135 (United States)]|[Dept. of Psychiatry, Yale Univ. School of Medicine and VA Connecticut Healthcare System, West Haven, CT (United States); Ichise, Masanori; Tipre, Dnyanesh; DeNucci, Christopher C.; Baldwin, Ronald M. [Molecular Imaging Branch, National Inst. of Mental Health, Building 1, Room B3-10, 1 Center Drive, MSC-0135, Bethesda, MD 20892-0135 (United States); Dyck, Christopher H. van; Tamagnan, Gilles; Bozkurt, Ali [Dept. of Psychiatry, Yale Univ. School of Medicine and VA Connecticut Healthcare System, West Haven, CT (United States); Zoghbi, Sami S. [Molecular Imaging Branch, National Inst. of Mental Health, Building 1, Room B3-10, 1 Center Drive, MSC-0135, Bethesda, MD 20892-0135 (United States)]|[Yale Univ. School of Medicine and VA Connecticut Healthcare System, West Haven, CT (United States); Mukhin, Alexey G.; Vaupel, D. Bruce; Horti, Andrew G.; Kimes, Alane S. [Brain Imaging Center, Intramural Research Program, National Institute on Drug Abuse, Baltimore, MD (United States); Iida, Hidehiro [Dept. of Investigative Radiology, National Cardiovascular Center Research Inst., Osaka (Japan); Koren, Andrei O. [Brain Imaging Center, Intramural Research Program, National Inst. on Drug Abuse, Baltimore, MD (United States)]|[Dept. of Psychiatry and Biobehavioral Sciences, David Geffen School of Medicine, UCLA, Los Angeles, CA (United States); London, Edythe D. [Brain Imaging Center, Intramural Research Program, National Inst. on Drug Abuse, Baltimore, MD (United States)]|[David Geffen School of Medicine, UCLA, Los Angeles, CA (United States); Seibyl, John P. [Dept. of Radiology, Yale Univ. School of Medicine and VA Connecticut Healthcare System, West Haven, CT (United States)]|[Inst. for Neurodegenerative Disorders, New Haven, CT (United States)

2003-12-01

The purpose of this study was to assess the utility of a new single-photon emission tomography ligand, [{sup 123}I]5-iodo-3-[2(S)-2-azetidinylmethoxy]pyridine (5-I-A-85380), to measure regional nAChR binding in human brain. Six healthy nonsmoker subjects (two men and four women, age 33{+-}15 years) participated in both a bolus (dose: 317{+-}42 MBq) and a bolus plus constant infusion (dose of bolus: 98{+-}32 MBq, B/I=6.7{+-}2.6 h, total dose: 331{+-}55 MBq) study. The study duration was 5-8 h and 14 h in the former and the latter, respectively. Nonlinear least-squares compartmental analysis was applied to bolus studies to calculate total (V{sub T}') and specific (V{sub S}') distribution volumes. A two-tissue compartment model was applied to identify V{sub S}'. V{sub T}' was also calculated in B/I studies. In bolus studies, V{sub T}' was well identified by both one- and two-tissue compartment models, with a coefficient of variation of less than 5% in most regions. The two-compartment model gave V{sub T}' values of 51, 22, 27, 32, 20, 19, 20, and 17 ml cm{sup -3} in thalamus, cerebellum, putamen, pons, and frontal, parietal, temporal, and occipital cortices, respectively. The two-compartment model did not identify V{sub S}' well. B/I studies provided poor accuracy of V{sub T}' measurement, possibly due to deviations from equilibrium conditions. These results demonstrate the feasibility of quantifying high-affinity type nAChRs using [{sup 123}I]5-I-A-85380 in humans and support the use of V{sub T}' measured by bolus studies. (orig.)

Magt & meninger: Pædagogiske værdiprofiler blandt personalet i danske børnehaver

Directory of Open Access Journals (Sweden)

Bent Olsen

2015-03-01

Full Text Available The article presents a research work on possible correlations between childhood background and educational values in a group of 700 employees in 80 Danish kindergartens. If the staff's pedagogical work is indebted to the living environment, the individual has grown up in; it can give this work the character of resilience or inertia and stability. This inertia, however, can come into conflict with the instrumental requirements on adaptability to external demands of change, transition and educational development programs.Using the so-called multiple correspondence analysis one obtains first a map of social background of respondents and their professional and cultural resources with the use of indicators of cultural and social capital in the wake of Pierre Bourdieu's theoretical framework. By the next step a new second map is being drawn based on the answers to a number of value questions. And finally one gets the relationship between social structure and educational values by comparing the two maps.The results show that respondents typically agree on the pedagogical values across social background, age and position in the professional job hierarchy. But the project also shows that there are correlations between the possession of social and cultural capital and what is being appreciated in the pedagogical work. Artiklen præsenterer et forskningsarbejde om mulige sammenhænge mellem opvækstbaggrund og pædagogiske værdier i en gruppe på 700 ansatte i 80 danske børnehaver. Hvis personalets pædagogiske arbejde står i gæld til de levemiljøer, man er vokset op i, kan det give dette arbejde karakter af stabilitet. Projektet undersøger, hvordan disse livslange forudsætninger krystalliseres i mødet med det børnehavepædagogiske arbejdsfelt: afsætter forskelle i opvækst- og leveerfaringer tilsvarende mønsterforskelle i de pædagogiske værdiorienteringer?  Med den såkaldte multible korrespondanceanalyse er det muligt at få sammenh

I kvartalis vähenes turism Eestis ja kõigis lähiriikides / Piret Kallas

Index Scriptorium Estoniae

Kallas, Piret

2009-01-01

Eesti majutusettevõtetes I kvartalis 2006-2009 majutatud turistid ja nende ööbimised ning turistide ööbimiste arvu muutus 2009 I kvartalis võrreldes 2008. aasta I kvartaliga Eestis, Põhjamaades ning Baltimaades.

Nonlinear dynamic modeling of a V-shaped metal based thermally driven MEMS actuator for RF switches

Science.gov (United States)

Bakri-Kassem, Maher; Dhaouadi, Rached; Arabi, Mohamed; Estahbanati, Shahabeddin V.; Abdel-Rahman, Eihab

2018-05-01

In this paper, we propose a new dynamic model to describe the nonlinear characteristics of a V-shaped (chevron) metallic-based thermally driven MEMS actuator. We developed two models for the thermal actuator with two configurations. The first MEMS configuration has a small tip connected to the shuttle, while the second configuration has a folded spring and a wide beam attached to the shuttle. A detailed finite element model (FEM) and a lumped element model (LEM) are proposed for each configuration to completely characterize the electro-thermal and thermo-mechanical behaviors. The nonlinear resistivity of the polysilicon layer is extracted from the measured current-voltage (I-V) characteristics of the actuator and the simulated corresponding temperatures in the FEM model, knowing the resistivity of the polysilicon at room temperature from the manufacture’s handbook. Both developed models include the nonlinear temperature-dependent material properties. Numerical simulations in comparison with experimental data using a dedicated MEMS test apparatus verify the accuracy of the proposed LEM model to represent the complex dynamics of the thermal MEMS actuator. The LEM and FEM simulation results show an accuracy ranging from a maximum of 13% error down to a minimum of 1.4% error. The actuator with the lower thermal load to air that includes a folded spring (FS), also known as high surface area actuator is compared to the actuator without FS, also known as low surface area actuator, in terms of the I-V characteristics, power consumption, and experimental static and dynamic responses of the tip displacement.

Performance study of single undoped CsI crystals for the Mu2e experiment

International Nuclear Information System (INIS)

Donghia, R.

2016-01-01

The Mu2e experiment at Fermilab aims to measure the neutrinoless muon-to-electron conversion, which is a charged-lepton flavor-violating process. The goal of the experiment is to reach a single event sensitivity of 2.5 × 10"−"1"7, to set an upper limit on the muon conversion rate at 6.7 × 10"−"1"7 in a three-year run. For this purpose, the Mu2e detector is designed to identify electrons from muon conversion and reduce the background to a negligible level. It consists of a low-mass straw tracker and a pure CsI crystal calorimeter. In this paper, the performance of undoped CsI single crystal is reported. Crystals from many vendors have been characterized by determining their Light Yield (LY) and Longitudinal Response Uniformity (LRU), when read with a UV extended PMT, and their time resolution when coupled to a silicon photomultiplier. The crystals show a LY of ∼ 100 photoelectrons per MeV when wrapped with Tyvek and coupled to the PMT without optical grease. The LRU is well represented by a linear slope that is on average 0.6%/cm. Both measurements have been performed using a "2"2Na source. The timing performance has been evaluated exploiting cosmic rays, with MPPC readout. A timing resolution lower than 400 ps has been achieved (at ∼ 20 MeV, which is the energy released by a minimum ionizing particle in the crystal).

Modelling and measurement of a moving magnet linear compressor performance

International Nuclear Information System (INIS)

Liang, Kun; Stone, Richard; Davies, Gareth; Dadd, Mike; Bailey, Paul

2014-01-01

A novel moving magnet linear compressor with clearance seals and flexure bearings has been designed and constructed. It is suitable for a refrigeration system with a compact heat exchanger, such as would be needed for CPU cooling. The performance of the compressor has been experimentally evaluated with nitrogen and a mathematical model has been developed to evaluate the performance of the linear compressor. The results from the compressor model and the measurements have been compared in terms of cylinder pressure, the ‘P–V’ loop, stroke, mass flow rate and shaft power. The cylinder pressure was not measured directly but was derived from the compressor dynamics and the motor magnetic force characteristics. The comparisons indicate that the compressor model is well validated and can be used to study the performance of this type of compressor, to help with design optimization and the identification of key parameters affecting the system transients. The electrical and thermodynamic losses were also investigated, particularly for the design point (stroke of 13 mm and pressure ratio of 3.0), since a full understanding of these can lead to an increase in compressor efficiency. - Highlights: • Model predictions of the performance of a novel moving magnet linear compressor. • Prototype linear compressor performance measurements using nitrogen. • Reconstruction of P–V loops using a model of the dynamics and electromagnetics. • Close agreement between the model and measurements for the P–V loops. • The design point motor efficiency was 74%, with potential improvements identified

I-V and C-V Characterization of a High-Responsivity Graphene/Silicon Photodiode with Embedded MOS Capacitor.

Science.gov (United States)

Luongo, Giuseppe; Giubileo, Filippo; Genovese, Luca; Iemmo, Laura; Martucciello, Nadia; Di Bartolomeo, Antonio

2017-06-27

We study the effect of temperature and light on the I-V and C-V characteristics of a graphene/silicon Schottky diode. The device exhibits a reverse-bias photocurrent exceeding the forward current and achieves a photoresponsivity as high as 2.5 A / W . We show that the enhanced photocurrent is due to photo-generated carriers injected in the graphene/Si junction from the parasitic graphene/SiO₂/Si capacitor connected in parallel to the diode. The same mechanism can occur with thermally generated carriers, which contribute to the high leakage current often observed in graphene/Si junctions.

Neutrinoless double beta decay in type I+II seesaw models

Energy Technology Data Exchange (ETDEWEB)

Borah, Debasish [Department of Physics, Tezpur University,Tezpur-784028 (India); Dasgupta, Arnab [Institute of Physics, Sachivalaya Marg,Bhubaneshwar-751005 (India)

2015-11-30

We study neutrinoless double beta decay in left-right symmetric extension of the standard model with type I and type II seesaw origin of neutrino masses. Due to the enhanced gauge symmetry as well as extended scalar sector, there are several new physics sources of neutrinoless double beta decay in this model. Ignoring the left-right gauge boson mixing and heavy-light neutrino mixing, we first compute the contributions to neutrinoless double beta decay for type I and type II dominant seesaw separately and compare with the standard light neutrino contributions. We then repeat the exercise by considering the presence of both type I and type II seesaw, having non-negligible contributions to light neutrino masses and show the difference in results from individual seesaw cases. Assuming the new gauge bosons and scalars to be around a TeV, we constrain different parameters of the model including both heavy and light neutrino masses from the requirement of keeping the new physics contribution to neutrinoless double beta decay amplitude below the upper limit set by the GERDA experiment and also satisfying bounds from lepton flavor violation, cosmology and colliders.

[123I]Epidepride neuroimaging of dopamine D2/D3 receptor in chronic MK-801-induced rat schizophrenia model

International Nuclear Information System (INIS)

Huang, Yuan-Ruei; Shih, Jun-Ming; Chang, Kang-Wei; Huang, Chieh; Wu, Yu-Lung; Chen, Chia-Chieh

2012-01-01

Purpose: [ 123 I]Epidepride is a radio-tracer with very high affinity for dopamine D 2 /D 3 receptors in brain. The importance of alteration in dopamine D 2 /D 3 receptor binding condition has been wildly verified in schizophrenia. In the present study we set up a rat schizophrenia model by chronic injection of a non-competitive NMDA receptor antagonist, MK-801, to examine if [ 123 I]epidepride could be used to evaluate the alterations of dopamine D 2 /D 3 receptor binding condition in specific brain regions. Method: Rats were given repeated injection of MK-801 (dissolved in saline, 0.3 mg/kg) or saline for 1 month. Afterwards, total distance traveled (cm) and social interaction changes were recorded. Radiochemical purity of [ 123 I]epidepride was analyzed by Radio-Thin-Layer Chromatography (chloroform: methanol, 9:1, v/v) and [ 123 I]epidepride neuroimages were obtained by ex vivo autoradiography and small animal SPECT/CT. Data obtained were then analyzed to determine the changes of specific binding ratio. Result: Chronic MK-801 treatment for a month caused significantly increased local motor activity and induced an inhibition of social interaction. As shown in [ 123 I]epidepride ex vivo autoradiographs, MK-801 induced a decrease of specific binding ratio in the striatum (24.01%), hypothalamus (35.43%), midbrain (41.73%) and substantia nigra (37.93%). In addition, [ 123 I]epidepride small animal SPECT/CT neuroimaging was performed in the striatum and midbrain. There were statistically significant decreases in specific binding ratio in both the striatum (P 123 I]epidepride is a useful radio-tracer to reveal the alterations of dopamine D 2 /D 3 receptor binding in a rat schizophrenia model and is also helpful to evaluate therapeutic effects of schizophrenia in the future.

Input modelling of ASSERT-PV V2R8M1 for RUFIC fuel bundle

Energy Technology Data Exchange (ETDEWEB)

Park, Joo Hwan; Suk, Ho Chun

2001-02-01

This report describes the input modelling for subchannel analysis of CANFLEX-RU (RUFIC) fuel bundle which has been developed for an advanced fuel bundle of CANDU-6 reactor, using ASSERT-PV V2R8M1 code. Execution file of ASSERT-PV V2R8M1 code was recently transferred from AECL under JRDC agreement between KAERI and AECL. SSERT-PV V2R8M1 which is quite different from COBRA-IV-i code has been developed for thermalhydraulic analysis of CANDU-6 fuel channel by subchannel analysis method and updated so that 43-element CANDU fuel geometry can be applied. Hence, ASSERT code can be applied to the subchannel analysis of RUFIC fuel bundle. The present report was prepared for ASSERT input modelling of RUFIC fuel bundle. Since the ASSERT results highly depend on user's input modelling, the calculation results may be quite different among the user's input models. The objective of the present report is the preparation of detail description of the background information for input data and gives credibility of the calculation results.

Input modelling of ASSERT-PV V2R8M1 for RUFIC fuel bundle

International Nuclear Information System (INIS)

Park, Joo Hwan; Suk, Ho Chun

2001-02-01

This report describes the input modelling for subchannel analysis of CANFLEX-RU (RUFIC) fuel bundle which has been developed for an advanced fuel bundle of CANDU-6 reactor, using ASSERT-PV V2R8M1 code. Execution file of ASSERT-PV V2R8M1 code was recently transferred from AECL under JRDC agreement between KAERI and AECL. SSERT-PV V2R8M1 which is quite different from COBRA-IV-i code has been developed for thermalhydraulic analysis of CANDU-6 fuel channel by subchannel analysis method and updated so that 43-element CANDU fuel geometry can be applied. Hence, ASSERT code can be applied to the subchannel analysis of RUFIC fuel bundle. The present report was prepared for ASSERT input modelling of RUFIC fuel bundle. Since the ASSERT results highly depend on user's input modelling, the calculation results may be quite different among the user's input models. The objective of the present report is the preparation of detail description of the background information for input data and gives credibility of the calculation results

Modeling the performance of low concentration photovoltaic systems

Energy Technology Data Exchange (ETDEWEB)

Reis, F. [SESUL, Faculdade de Ciencias da Universidade de Lisboa, 1749-016 Lisboa (Portugal); WS Energia, Ed. Tecnologia II 47, Taguspark, Oeiras (Portugal); Brito, M.C. [SESUL, Faculdade de Ciencias da Universidade de Lisboa, 1749-016 Lisboa (Portugal); Corregidor, V.; Wemans, J. [WS Energia, Ed. Tecnologia II 47, Taguspark, Oeiras (Portugal); Sorasio, G. [WS Energia, Ed. Tecnologia II 47, Taguspark, Oeiras (Portugal); Centro Richerche ISCAT, VS Pellico, 12037, Saluzzo (Italy)

2010-07-15

A theoretical model has been developed to describe the response of V-trough systems in terms of module temperature, power output and energy yield using as inputs the atmospheric conditions. The model was adjusted to DoubleSun {sup registered} concentration technology, which integrates dual-axis tracker and conventional mono-crystalline Si modules. The good agreement between model predictions and the results obtained at WS Energia laboratory, Portugal, validated the model. It is shown that DoubleSun {sup registered} technology increases up to 86% the yearly energy yield of conventional modules relative to a fixed flat-plate system. The model was also used to perform a sensitivity analysis, in order to highlight the relevance of the leading working parameters (such as irradiance) in system performance (energy yield and module temperature). Model results show that the operation module temperature is always below the maximum working temperature defined by the module manufacturers. (author)

Analysis of the imaging performance in indirect digital mammography detectors by linear systems and signal detection models

International Nuclear Information System (INIS)

Liaparinos, P.; Kalyvas, N.; Kandarakis, I.; Cavouras, D.

2013-01-01

Purpose: The purpose of this study was to provide an analysis of imaging performance in digital mammography, using indirect detector instrumentation, by combining the Linear Cascaded Systems (LCS) theory and the Signal Detection Theory (SDT). Observer performance was assessed, by examining frequently employed detectors, consisting of phosphor-based X-ray converters (granular Gd 2 O 2 S:Tb and structural CsI:Tl), coupled with the recently introduced complementary metal-oxide-semiconductor (CMOS) sensor. By applying combinations of various irradiation conditions (filter-target and exposure levels at 28 kV) on imaging detectors, our study aimed to find the optimum system set-up for digital mammography. For this purpose, the signal to noise transfer properties of the medical imaging detectors were examined for breast carcinoma detectability. Methods: An analytical model was applied to calculate X-ray interactions within software breast phantoms and detective media. Modeling involved: (a) three X-ray spectra used in digital mammography: 28 kV Mo/Mo (Mo: 0.030 mm), 28 kV Rh/Rh (Rh: 0.025 mm) and 28 kV W/Rh (Rh: 0.060 mm) at different entrance surface air kerma (ESAK) of 3 mGy and 5 mGy, (b) a 5 cm thick Perspex software phantom incorporating a small Ca lesion of varying size (0.1–1 cm), and (c) two 200 μm thick phosphor-based X-ray converters (Gd2O2S:Tb, CsI:Tl), coupled to a CMOS based detector of 22.5 μm pixel size. Results: Best (lowest) contrast threshold (CT) values were obtained with the combination: (i) W/Rh target-filter, (ii) 5 mGy (ESAK), and (iii) CsI:Tl-CMOS detector. For lesion diameter 0.5 cm the CT was found improved, in comparison to other anode/filter combinations, approximately 42% than Rh/Rh and 55% than Mo/Mo, for small sized carcinoma (0.1 cm) and approximately 50% than Rh/Rh and 125% than Mo/Mo, for big sized carcinoma (1 cm), considering 5 mGy X-ray beam. By decreasing lesion diameter and thickness, a limiting CT (100%) was occurred for size

Modelling the V-I characteristic of coated conductors

Energy Technology Data Exchange (ETDEWEB)

Rutter, N A [Department of Materials Science, University of Cambridge, Cambridge (United Kingdom); IRC in Superconductivity, Cavendish Laboratory, Cambridge (United Kingdom)]. E-mail: ruttern@ornl.gov; Glowacki, B A [Department of Materials Science, University of Cambridge, Cambridge (United Kingdom); IRC in Superconductivity, Cavendish Laboratory, Cambridge (United Kingdom)

2001-09-01

The critical current densities of coated conductor samples are limited by the presence of low-angle grain boundaries. These boundaries provide an obstacle to current flow, which is determined by their misorientation angle. The superconducting layer of a coated conductor tape may be considered as a network of grains linked together by grain boundaries through which the supercurrent must pass. Such a network has been investigated using a two-dimensional grain model. The three-dimensional orientations of grains in the superconducting network can be assigned randomly based on information obtained from EBSD and x-ray texture measurements. By assigning critical current values to boundaries based on their calculated misorientation, the overall J{sub c} of macroscopic modelled samples can then be calculated. This paper demonstrates how such a technique is applied using a small-scale, idealized sample grain structure in an applied magnetic field. The onset of dissipation at the critical current may be viewed in terms of the flow of the magnetic flux across the sample along high-angle grain boundaries when the critical current is first exceeded. Through such a consideration, the model may be further used to predict the current-voltage characteristic of the coated conductor sample around the superconducting transition. (author)

CFD Analysis on the Thermal Hydraulic Performance of an SAH Duct with Multi V-Shape Roughened Ribs

Directory of Open Access Journals (Sweden)

Anil Kumar

2016-05-01

Full Text Available This study presents the heat transfer and fluid flow characteristics in a rib-roughened SAH (solar air heater channel. The artificial roughness of the rectangular channel was in the form of a thin circular wire in discrete multi V-pattern rib geometries. The effect of this geometry on heat transfer, fluid flow, and performance augmentation was investigated using the CFD (computational fluid dynamics. The roughness parameters were a relative discrete distance of 0.69, a relative rib height of 0.043, a relative rib pitch of 10, a relative rib width of 6.0, and a flow-attack-angle of 60°. The discrete width ratios and Reynolds numbers ranged from 0.5 to 2.0 and from 2000 to 20,000, respectively. The CFD results using the renormalization k-epsilon model were in good agreement with the empirical relationship. This model was used to investigate the heat transfer and fluid flow characteristics in the multi V-pattern rib roughened SAH channel. The thermo-hydraulic performance was found to be the best for the discrete width ratio of 1.0. A discrete multi V-pattern rib combined with dimple staggered ribs also had better overall thermal performance compared to other rib shapes.

Cannes'i võidufilmi taga on töö noortega / Annika Koppel

Index Scriptorium Estoniae

Koppel, Annika

2008-01-01

Cannes'i 61. filmifestivali Kuldse Palmioksa võitis prantslase Laurent Cantet' mängufilm "Klass" ("Entre les Murs"). Ka teistest auhinnatud filmidest ja ex-aequo preemia saajatest Clint Eastwoodist ja Catherine Deneuve'ist

Electrical characterization of polymer matrix — TiO2 filler composites through isothermal polarization / depolarization currents and I-V tests

Science.gov (United States)

Stavrakas, Ilias; Triantis, Dimos; Hloupis, George; Moutzouris, Konstantinos

2014-04-01

Specimens of polymer matrix — ceramic TiO2 filler composites were prepared. The contribution of the filler content on the electrical conductivity and energy storage properties of the samples was examined. I-V and Isothermal Polarization/Depolarization Current (IPC/IDC) measurements were conducted. Dc conductivity values directly calculated from the I-V curves exhibited excellent agreement with corresponding values derived from the IPC/IDC recordings. Standard models were employed for fitting the IPC/IDC data. In specific, the short and the very long depolarization times were fitted by use of power laws of different slopes, while the intermediate depolarization times were fitted as a sum of three exponential decays. The present study reveals a strong dependence of the depolarization and polarization processes, as well as of the dc conductivity, on the filler concentration.

Antisites in III-V semiconductors: Density functional theory calculations

KAUST Repository

Chroneos, A.

2014-07-14

Density functional based simulation, corrected for finite size effects, is used to investigate systematically the formation of antisite defects in III-V semiconductors (III=Al, Ga, and In and V=P, As, and Sb). Different charge states are modelled as a function of the Fermi level and under different growth conditions. The formation energies of group III antisites (III V q) decrease with increasing covalent radius of the group V atom though not group III radius, whereas group V antisites (V I I I q) show a consistent decrease in formation energies with increase in group III and group V covalent radii. In general, III V q defects dominate under III-rich conditions and V I I I q under V-rich conditions. Comparison with equivalent vacancy formation energy simulations shows that while antisite concentrations are always dominant under stoichiometric conditions, modest variation in growth or doping conditions can lead to a significantly higher concentration of vacancies. © 2014 AIP Publishing LLC.

THE PENA BLANCA NATURAL ANALOGUE PERFORMANCE ASSESSMENT MODEL

Energy Technology Data Exchange (ETDEWEB)

G. Saulnier and W. Statham

2006-04-16

The Nopal I uranium mine in the Sierra Pena Blanca, Chihuahua, Mexico serves as a natural analogue to the Yucca Mountain repository. The Pena Blanca Natural Analogue Performance Assessment Model simulates the mobilization and transport of radionuclides that are released from the mine and transported to the saturated zone. The Pena Blanca Natural Analogue Performance Assessment Model uses probabilistic simulations of hydrogeologic processes that are analogous to the processes that occur at the Yucca Mountain site. The Nopal I uranium deposit lies in fractured, welded, and altered rhyolitic ash-flow tuffs that overlie carbonate rocks, a setting analogous to the geologic formations at the Yucca Mountain site. The Nopal I mine site has the following analogous characteristics as compared to the Yucca Mountain repository site: (1) Analogous source--UO{sub 2} uranium ore deposit = spent nuclear fuel in the repository; (2) Analogous geology--(i.e. fractured, welded, and altered rhyolitic ash-flow tuffs); (3) Analogous climate--Semiarid to arid; (4) Analogous setting--Volcanic tuffs overlie carbonate rocks; and (5) Analogous geochemistry--Oxidizing conditions Analogous hydrogeology: The ore deposit lies in the unsaturated zone above the water table.

THE PENA BLANCA NATURAL ANALOGUE PERFORMANCE ASSESSMENT MODEL

International Nuclear Information System (INIS)

G. Saulnier; W. Statham

2006-01-01

The Nopal I uranium mine in the Sierra Pena Blanca, Chihuahua, Mexico serves as a natural analogue to the Yucca Mountain repository. The Pena Blanca Natural Analogue Performance Assessment Model simulates the mobilization and transport of radionuclides that are released from the mine and transported to the saturated zone. The Pena Blanca Natural Analogue Performance Assessment Model uses probabilistic simulations of hydrogeologic processes that are analogous to the processes that occur at the Yucca Mountain site. The Nopal I uranium deposit lies in fractured, welded, and altered rhyolitic ash-flow tuffs that overlie carbonate rocks, a setting analogous to the geologic formations at the Yucca Mountain site. The Nopal I mine site has the following analogous characteristics as compared to the Yucca Mountain repository site: (1) Analogous source--UO 2 uranium ore deposit = spent nuclear fuel in the repository; (2) Analogous geology--(i.e. fractured, welded, and altered rhyolitic ash-flow tuffs); (3) Analogous climate--Semiarid to arid; (4) Analogous setting--Volcanic tuffs overlie carbonate rocks; and (5) Analogous geochemistry--Oxidizing conditions Analogous hydrogeology: The ore deposit lies in the unsaturated zone above the water table

Overview and performance of the FNAL KTeV DAQ system

International Nuclear Information System (INIS)

Nakaya, T.; O'Dell, V.; Hazumi, M.; Yamanaka, T.

1995-11-01

KTeV is a new fixed target experiment at Fermilab designed to study CP violation in the neutral kaon system. The KTeV Data Acquisition System (DAQ) is out of the highest performance DAQ's in the field of high energy physics. The sustained data throughput of the KTeV DAQ reaches 160 Mbytes/sec, and the available online level 3 processing power is 3600 Mips. In order to handle such high data throughput, the KTeV DAQ is designed around a memory matrix core where the data flow is divided and parallelized. In this paper, we present the architecture and test results of the KTeV DAQ system

On the exact solutions of high order wave equations of KdV type (I)

Science.gov (United States)

Bulut, Hasan; Pandir, Yusuf; Baskonus, Haci Mehmet

2014-12-01

In this paper, by means of a proper transformation and symbolic computation, we study high order wave equations of KdV type (I). We obtained classification of exact solutions that contain soliton, rational, trigonometric and elliptic function solutions by using the extended trial equation method. As a result, the motivation of this paper is to utilize the extended trial equation method to explore new solutions of high order wave equation of KdV type (I). This method is confirmed by applying it to this kind of selected nonlinear equations.

[A. I. Kuznetsova, O. A. Kazakevitsh, E. V. Grushkina, E. A. Helimski. Selkupski jazõk] / Ago Künnap

Index Scriptorium Estoniae

Künnap, Ago, 1941-

2003-01-01

Raamatust: Kuznetsova, A. I., Kazakevitsh, O. A., Grushkina, E. V., Helimski, E. A. Selkupski jazõk : utshebnoje possobije dlja pedagogitsheskihh kolledzhei i võsshihh utshebnõhh zavedeni. Sankt-Peterburg : Filial izdatelstva Prosveshtshenije, 2002

Characterisation of oral and i.v. glucose handling in truncally vagotomised subjects with pyloroplasty

DEFF Research Database (Denmark)

Plamboeck, Astrid; Veedfald, Simon; Deacon, Carolyn F

2013-01-01

=16) and matched controls (n=10) underwent 50 g-oral glucose tolerance test (OGTT)±vildagliptin, a DPP4 inhibitor (DPP4i) and isoglycaemic i.v. glucose infusion (IIGI), copying the OGTT without DPP4i. RESULTS: Isoglycaemia was obtained with 25±2 g glucose in vagotomised subjects and 18±2 g in controls...

Exploring the influence of constitutive models and associated parameters for the orthogonal machining of Ti6Al4V

Science.gov (United States)

Pervaiz, S.; Anwar, S.; Kannan, S.; Almarfadi, A.

2018-04-01

Ti6Al4V is known as difficult-to-cut material due to its inherent properties such as high hot hardness, low thermal conductivity and high chemical reactivity. Though, Ti6Al4V is utilized by industrial sectors such as aeronautics, energy generation, petrochemical and bio-medical etc. For the metal cutting community, competent and cost-effective machining of Ti6Al4V is a challenging task. To optimize cost and machining performance for the machining of Ti6Al4V, finite element based cutting simulation can be a very useful tool. The aim of this paper is to develop a finite element machining model for the simulation of Ti6Al4V machining process. The study incorporates material constitutive models namely Power Law (PL) and Johnson – Cook (JC) material models to mimic the mechanical behaviour of Ti6Al4V. The study investigates cutting temperatures, cutting forces, stresses, and plastic strains with respect to different PL and JC material models with associated parameters. In addition, the numerical study also integrates different cutting tool rake angles in the machining simulations. The simulated results will be beneficial to draw conclusions for improving the overall machining performance of Ti6Al4V.

Transport systems of Ventricaria ventricosa: I/V analysis of both membranes in series as a function of [K(+)](o).

Science.gov (United States)

Beilby, M J; Bisson, M A

1999-09-01

The current-voltage (I/V) profiles of Ventricaria (formerly Valonia) membranes were measured at a range of external potassium concentrations, [K(+)](o), from 0.1 to 100 mm. The conductance-voltage (G/V) characteristics were computed to facilitate better resolution of the profile change with time after exposure to different [K(+)](o). The resistance-voltage (R/V) characteristics were computed to attempt resolution of plasmalemma and tonoplast. Four basic electrophysiological stages emerged: (1) Uniform low resistance between -60 and +60 mV after the cell impalement. (2) High resistance between +50 and +150 for [K(+)](o) from 0.1 to 1.0 mm and hypotonic media. (3) High resistance between -150 and -20 mV for [K(+)](o) of 10 mm (close to natural seawater) and hypertonic media. (4) High resistance between -150 and +170 mV at [K(+)](o) of 100 mm. The changes between these states were slow, requiring minutes to hours and sometimes exhibiting spontaneous oscillations of the membrane p.d. (potential difference). Our analysis of the I/V data supports a previous hypothesis, that Ventricaria tonoplast is the more resistive membrane containing a pump, which transports K(+) into the vacuole to regulate turgor. We associate state (1) with the plasmalemma conductance being dominant and the K(+) pump at the tonoplast short-circuited probably by a K(+) channel, state (2) with the K(+) pump "off" or short-circuited at p.d.s more negative than +50 mV, state (3) with the K(+) pump "on, " and state (4) with the pump dominant, but affected by high K(+). A model for the Ventricaria membrane system is proposed.

Type I supernova models

International Nuclear Information System (INIS)

Canal, Ramon; Labay, Javier; Isern, Jordi

1987-01-01

We briefly describe the characteristics of Type I supernova outbursts and we present the theoretical models so far advanced to explain them. We especially insist on models based on the thermonuclear explosion of a white dwarf in a close binary system, even regarding the recent division of Type I supernovae into the Ia and Ib subtypes. Together with models assuming explosive thermonuclear burning in a fluid interior, we consider in some detail those based on partially solid interiors. We finally discuss models that incorporate nonthermonuclear energy contributions, suggested in order to explain Type Ib outbursts. (Author)

<i>In Situi> Synthesis of γ-AlOOH and Synchronous Adsorption Separation of V(V) from Highly Concentrated Cr(VI) Multiplex Complex solutions

Energy Technology Data Exchange (ETDEWEB)

Zhang, Hailin [National; University of Chinese Academy of Sciences, No. 19A Yuquan Road, Shijingshan District,; Li, Ping [National; Wang, Zheming [Physcial; Zhang, Xin [Physcial; Zheng, Shili [National; Zhang, Yi [National

2017-07-13

Boehmite (γ-AlOOH) was synthesized to selectively adsorb V(V) from K₂CrO₄-KVO₃-H₂O solutions with highly concentrated Cr(VI) and low concentration V(V). The synthesized γ-AlOOH has a BET surface area of 433.2 m²/g and an average pore size of 3.5 nm. It possesses a maximum adsorption capacity of V(V) of 1.53 mmol/g from K₂CrO₄-KVO₃-H₂O solutions. The adsorption of V(V) onto γ-AlOOH follows the Langmuir isotherm model and pseudo-second-order kinetics equation by forming innersphere complexes while the Cr(VI) adsorption forms both inner-sphere and outer-sphere chromate complexes depending on solution pH. The γ-AlOOH was further synthesized in situ by adding HNO₃ into the K₂CrO₄-KAlO₂- KVO₃-H₂O solutions and then used for synchronous adsorption of V(V) and Cr(VI), resulting in increased adsorption capacity of V(V) of 2.88 mmol/g and decreased adsorption capacity of Cr(VI) to 0.073 mmol/g, respectively. In the latter process, adsorption pH values were adjustable, and adsorption reached equilibrium instantaneously, supporting a novel in situ synthesis and adsorption integration strategy with adjustable surface charge of adsorbent and disappearance of diffusion effect.

Search for the Standard Model Higgs Boson in ZH → v$\\bar{v}$b$\\bar{b}$ channel in p$\\bar{p}$ collisions at √s= 1.96 TeV

Energy Technology Data Exchange (ETDEWEB)

Dubey, Abhinav [Univ. of Delhi, New Delhi (India)

2011-01-01

A search for the standard model Higgs boson is performed in 5.2 fb^-1 of p$\\bar{p}$ collisions at p √s = 1.96 TeV, collected with the DØ detector at the Fermilab Tevatron. The final state considered is a pair of b jets with large missing transverse energy, as expected from p$\\bar{p}$→ ZH → v$\\bar{v}$b$\\bar{b}$ production. The search is also sensitive to the WH → ℓvb$\\bar{b}$ channel, where the charged lepton is not identified. Boosted decision trees are used to discriminate signal from background. Good agreement is observed between data and expected backgrounds, and, for a Higgs-boson mass of 115 GeV, a limit is set at 95% C.L. on the cross section multiplied by branching fraction of (p$\\bar{p}$ → (Z/W)H) × (H → b$\\bar{b}$) that is a factor 4.57 expected and 3.73 observed larger than the value expected from the standard model.

Low-cost, High Flexibility I-V Curve Tracer for Photovoltaic Modules

DEFF Research Database (Denmark)

Ibirriaga, Julen Joseba Maestro; Pena, Xabier Miquelez de Mendiluce; Opritescu, Adrian

2010-01-01

This work presents the design, construction and test of an in-door low cost, high flexibility I-V curve tracer for photovoltaic modules. The tracer is connected to a Xenon lamp based flashing solar simulator. The designed tracer is able to deal with the very fast changing irradiation conditions...

33 CFR 110.250 - St. Thomas Harbor, Charlotte Amalie, V.I.

Science.gov (United States)

2010-07-01

... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false St. Thomas Harbor, Charlotte... SECURITY ANCHORAGES ANCHORAGE REGULATIONS Anchorage Grounds § 110.250 St. Thomas Harbor, Charlotte Amalie.... Thomas, V.I. of the United States and approaches thereto, including all waters under its jurisdiction, as...

Zircon fission-track technique: a laboratory procedure adopted at the Institute of Geology, Academy of Sciences of the Czech Republic, v.v.i

Czech Academy of Sciences Publication Activity Database

Murakami, M.; Svojtka, Martin

2007-01-01

Roč. 20, - (2007), s. 13-19 ISSN N R&D Projects: GA MŠk 1K05030 Institutional research plan: CEZ:AV0Z30130516 Keywords : fission-track * zircon * Institute of Geology AS CR, v. v. i. Subject RIV: DB - Geology ; Mineralogy

RF System Modelling for the JLab 12 GeV Upgrade and RIA

International Nuclear Information System (INIS)

Alicia Hofler; Jean Delayen; Hovater, J.; Stefan Simrock

2003-01-01

Jefferson Lab is using the MATLAB/Simulink library for RF systems developed for TTF as a tool to develop a model of its 12 GeV upgrade and the Rare Isotope Accelerator (RIA) to study the behavior and performance of the RF control system. The library includes elements describing a superconducting cavity with mechanical modes excited by Lorentz Force effects and a klystron including saturation characteristics. It can be applied to gradient and phase or in-phase and quadrature control for cavities operating in either a self-excited loop or generator driven mode. We will provide an overview of the theory behind the library components and present initial modeling results for Jefferson Lab's 12 GeV Upgrade and the RIA systems

Vanadium Pentoxide Nanobelt-Reduced Graphene Oxide Nanosheet Composites as High-Performance Pseudocapacitive Electrodes: ac Impedance Spectroscopy Data Modeling and Theoretical Calculations

Directory of Open Access Journals (Sweden)

Sanju Gupta

2016-07-01

Full Text Available Graphene nanosheets and graphene nanoribbons, G combined with vanadium pentoxide (VO nanobelts (VNBs and VNBs forming GVNB composites with varying compositions were synthesized via a one-step low temperature facile hydrothermal decomposition method as high-performance electrochemical pseudocapacitive electrodes. VNBs from vanadium pentoxides (VO are formed in the presence of graphene oxide (GO, a mild oxidant, which transforms into reduced GO (rGOHT, assisting in enhancing the electronic conductivity coupled with the mechanical robustness of VNBs. From electron microscopy, surface sensitive spectroscopy and other complementary structural characterization, hydrothermally-produced rGO nanosheets/nanoribbons are decorated with and inserted within the VNBs’ layered crystal structure, which further confirmed the enhanced electronic conductivity of VNBs. Following the electrochemical properties of GVNBs being investigated, the specific capacitance Csp is determined from cyclic voltammetry (CV with a varying scan rate and galvanostatic charging-discharging (V–t profiles with varying current density. The rGO-rich composite V1G3 (i.e., VO/GO = 1:3 showed superior specific capacitance followed by VO-rich composite V3G1 (VO/GO = 3:1, as compared to V1G1 (VO/GO = 1:1 composite, besides the constituents, i.e., rGO, rGOHT and VNBs. Composites V1G3 and V3G1 also showed excellent cyclic stability and a capacitance retention of >80% after 500 cycles at the highest specific current density. Furthermore, by performing extensive simulations and modeling of electrochemical impedance spectroscopy data, we determined various circuit parameters, including charge transfer and solution resistance, double layer and low frequency capacitance, Warburg impedance and the constant phase element. The detailed analyses provided greater insights into physical-chemical processes occurring at the electrode-electrolyte interface and highlighted the comparative performance of

Solvent Extraction and Separation of Chromium(III) and (V I) in Aqueous Solutions with Trioctylphosphine Oxide

International Nuclear Information System (INIS)

Sekine, T.; Yamada, M.

1999-01-01

The solvent extraction of chromium(III) and (V I) in aqueous solutions with a solvating type extractant, trioctylphosphine oxide(TOPO), in hexane is studied. Kinetically inert Cr 3+ is extracted from 1 mol dm -3 sodium perchlorate solution very quickly and quantitatively as Cr(H 2 O · TOPO) 6 3+ (CIO 4 -) 3 . Chromium(V I) in hydrochloric acid is extracted effectively as the H 2 CrO $ (H CI) n centre dot TOPO m species ( m = 2 or 3, n = 0 to 2) and the distribution ratio increased by an increase in the acid concentration. From these, a procedure is proposed for the extraction of both chromium(V I) and chromium(III) in aqueous solution separately with 0.1 mol dm -3 TOPO in hexane

Verification of Electromagnetic Physics Models for Parallel Computing Architectures in the GeantV Project

Energy Technology Data Exchange (ETDEWEB)

Amadio, G.; et al.

2017-11-22

An intensive R&D and programming effort is required to accomplish new challenges posed by future experimental high-energy particle physics (HEP) programs. The GeantV project aims to narrow the gap between the performance of the existing HEP detector simulation software and the ideal performance achievable, exploiting latest advances in computing technology. The project has developed a particle detector simulation prototype capable of transporting in parallel particles in complex geometries exploiting instruction level microparallelism (SIMD and SIMT), task-level parallelism (multithreading) and high-level parallelism (MPI), leveraging both the multi-core and the many-core opportunities. We present preliminary verification results concerning the electromagnetic (EM) physics models developed for parallel computing architectures within the GeantV project. In order to exploit the potential of vectorization and accelerators and to make the physics model effectively parallelizable, advanced sampling techniques have been implemented and tested. In this paper we introduce a set of automated statistical tests in order to verify the vectorized models by checking their consistency with the corresponding Geant4 models and to validate them against experimental data.

Monitoring and Fault Detection in Photovoltaic Systems Based On Inverter Measured String I-V Curves

DEFF Research Database (Denmark)

Spataru, Sergiu; Sera, Dezso; Kerekes, Tamas

2015-01-01

Most photovoltaic (PV) string inverters have the hardware capability to measure at least part of the current-voltage (I-V) characteristic curve of the PV strings connected at the input. However, this intrinsic capability of the inverters is not used, since I-V curve measurement and monitoring...... functions are not implemented in the inverter control software. In this paper, we aim to show how such a functionality can be useful for PV system monitoring purposes, to detect the presence and cause of power-loss in the PV strings, be it due to shading, degradation of the PV modules or balance......-of-system components through increased series resistance losses, or shunting of the PV modules. To achieve this, we propose and experimentally demonstrate three complementary PV system monitoring methods that make use of the I-V curve measurement capability of a commercial string inverter. The first method is suitable...

Practice patterns for the use of iodinated i.v. contrast media for pediatric CT studies: a survey of the Society for Pediatric Radiology.

Science.gov (United States)

Callahan, Michael J; Servaes, Sabah; Lee, Edward Y; Towbin, Alexander J; Westra, Sjirk J; Frush, Donald P

2014-04-01

There are limited data available on the use of i.v. contrast media for CT studies in the pediatric population. The purpose of this study is to determine the practice patterns of i.v. contrast media usage for pediatric CT by members of the Society for Pediatric Radiology (SPR). SPR members were surveyed regarding the use of i.v. contrast media for pediatric CT studies. Questions pertained to information required before administering i.v. contrast media, types of central catheters for injecting i.v. contrast media, injection rates based on angiocatheter size and study type, and management of i.v. contrast media extravasation. The response rate of 6% (88/1545) represented practice patterns of 26% (401/1545) of the SPR membership. Most respondents thought the following clinical information was mandatory before i.v. contrast media administration: allergy to i.v. contrast media (97%), renal insufficiency (97%), current metformin use (72%), significant allergies (61%), diabetes (54%), and asthma (52%). Most administered i.v. contrast media through nonimplanted central venous catheters (78%), implanted venous ports (78%), and peripherally inserted central catheters (72%). The most common maximum i.v. contrast media injection rates were 5.0 mL/s or greater for a 16-gauge angiocatheter, 4.0 mL/s for an 18-gauge angiocatheter, 3.0 mL/s for a 20-gauge angiocatheter, and 2.0 mL/s for a 22-gauge angiocatheter. For soft-tissue extravasation of i.v. contrast media, 95% elevate the affected extremity, 76% use ice, and 45% use heat. The results of this survey illustrate the collective opinion of a subset of SPR members relating to the use of i.v. contrast media in pediatric CT, providing guidelines for clinical histories needed before i.v. contrast media, maximum i.v. contrast injection rates for standard angiocatheters, contrast media injection rates for specific CT studies, and management of i.v. contrast media soft-tissue extravasation.

Effects of Command and Control Vehicle (C2V) Operational Environment on Soldier Health and Performance

Science.gov (United States)

Cowings, Patricia S.; Toscano, William B.; DeRoshia, Charles; Tauson, Richard

1999-01-01

The purpose of this project was to use NASA technology to assist the US Army in the assessment of motion sickness and performance of soldiers in the Command and Control Vehicle (C2V). Three different vehicle configurations were tested: oblique, (3 seats at a 20-degree angle from the direction of travel); perpendicular, (3 seats at a 90 degree angle); and 4-forward, (all seats faced forward). In all vehicles, the front seat faced forward. Sixteen men and eight women participated for 15 days: 2 days of classroom instruction; 12 days of field tests in the C2V, and 15 minutes of post-field test performance measures. Conditions for field tests were: an initial Park; four Moves (i.e., travel over a mixed terrain); and four Short-halts following movement. NASA task batteries, mood and symptom scales, and physiological data were collected during field tests. Motion sickness symptoms ranging from slight to severe were reported for all subjects. Conclusions were: (1) there was no difference between vehicle configurations; (2) there was a negative impact on crew performance and health when subjects attended to visual screens during vehicle movement; and (3) symptoms and performance degradation were not mitigated by intermittent short-halts.

Lufthastighed langs gulvet i et lokale med vægmonteret armatur og fortrængningsventilation

DEFF Research Database (Denmark)

Nielsen, Peter V.

Luften fra vægmonterede lavimpulsarmaturer strømmer ved fortrængningsventilation direkte ind i opholdszonen. Det er derfor vigtigt at kunne bestemme den lufthastighed, der opstår i forskellig afstand fra armaturet for at fastlægge den termiske komfort i lokalet. I det følgende viser en række måli...

Acerca de las funciones del <i>adab> en la sociedad andalusí del s. V/XI. Código críptico y elite cultural

Directory of Open Access Journals (Sweden)

Mohedano Barceló, José

2004-12-01

Full Text Available In this paper we seek to think about some of the factors that bring about the literary production (<i>adab> in al-Andalus during the second half of the 5th/11th century and, more specifically, to put some questions about the relationships between a literary model full of cryptic codes - pointing out the special prominence of the private correspondence (<i>al-rasā'il al-ijwāniyyāti>- and the adoption of this system as a private language on the part of a political and cultural elite which historical context we try to delimit.

En el presente artículo pretendemos reflexionar acerca de algunos de los parámetros que determinan la producción de literatura (<i>adab> en al-Andalus en la segunda mitad del s. V/XI y, más concretamente, levantar algunas hipótesis acerca de las relaciones entre un modelo literario cargado de códigos encriptados, dando especial relieve a la correspondencia personal (<i>al-rasā'il al-ijwāniyyāti>, y la adopción de dicho sistema como lenguaje particular por parte de una elite político- cultural cuyo entorno histórico procuramos definir.

Study of some properties of 's' neutron resonance parameters for target nuclei I = 1/2 and I = 3/2 in function of spin value J = I + 1/2 in the energy range 1 {yields} 5000 eV; Etude de quelques proprietes des parametres de resonances des neutrons ''s'' pour des noyaux cibles I = 1/2 et I = 3/2 en fonction de la valeur du spin J = I + 1/2 dans le domaine d'energie 1 eV {yields} 5000 eV

Energy Technology Data Exchange (ETDEWEB)

Julien, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1967-05-15

Different kinds of experiments and analysis methods allowing to achieve neutron resonances parameters in the low energy range (1 eV {yields} 5000 eV) are described. A great deal of effort to improve experimental conditions and data processing in order to know the spin value J = I {+-} 1/2 has been spent. The time of flight method was used. A few target nuclei I = 3/2 and 1 = 1/2 have been studied. For I = 3/2 (Ga, As, 3r, Au) we find S{sub o} J = 2 {approx_equal} 2 S{sub o} J = 1 and S{sub o} J = 1 {approx_equal} S{sub o} J = 0 for I = 1/2 (Tm, Pt) but {sup 77}Se. Fluctuations of the total radiative width {gamma}{sub {gamma}} depend on the spin value I = I {+-} 1/2 when E1 transition, are enhanced for one of the both spin states. The magnitude of these fluctuations can be explained of the strength of E1 transitions (E{sub {gamma}} {approx} 7 MeV) is supposed to be proportional to E{sup 5}{sub {gamma}} instead of E{sup 3}{sub {gamma}}. The distribution of levels spacings against spin value J are considered and are compared to theoretical predictions. (author) [French] On decrit les differentes methodes d'analyse permettant d'obtenir les parametres des resonances de neutron dans le domaine d'energie 1 eV {yields} 5000 eV. Un effort particulier a ete fait pour connaitre la valeur du spin J = I {+-} 1/2. Les types d'experience et les analyses des donnees, developpes et ameliores pour determiner J sont decrits. Les resultats obtenus ont permis l'etude de differentes proprietes en fonction du spin J. On trouve: S{sub o} J 2 {approx_equal} 2 S{sub o} J = 1 pour les noyaux I = 3/2 etudies (Ga, As, Br, Au) et S{sub o} J = 1 {approx_equal} S{sub o} J = 0 Pour le Tm et {sup 195}Pt de spin I = 1/2. On constate que les largeurs radiatives totales {gamma}{sub {gamma}} fluctuent si des transitions E1 aux premiers etats excites sont favorisees. Ces fluctuations peuvent etre expliquees si on suppose que les intensites de ces transitions sont proportionnelles a E{sup 5}{sub {gamma

Neutrino masses at v3/2

International Nuclear Information System (INIS)

Arkani-Hamed, Nima; Hall, Lawrence; Murayama, Hitoshi; Smith, David; Weiner, Neal

2000-01-01

Theories in which neutrino masses are generated by a conventional see-saw mechanism generically yield masses which are O(v 2 ) in units where M Pl = 1, which is naively too small to explain the results from SuperKamiokande. In supersymmetric theories with gravity mediated supersymmetry breaking, the fundamental small parameter is not v/M Pl , but m I /M Pl , where m I is the scale of supersymmetry breaking in the hidden sector. We note that m I 3 /M Pl 2 is only slightly too large to explain SuperKamiokande, and present two models that achieve neutrino masses at this order in m I , one of which has an additional suppression λ τ 2 , while the other has additional suppression arising from a loop factor. The latter model shares a great deal of phenomenology with a class of models previously explored, including the possibility of viable sneutrino dark matter

KONVENCIJE MOD O PRISILNEM DELU V LUČI DANAŠNJEGA ČASA

OpenAIRE

Kokoravec, Mateja

2015-01-01

Prisilno delo je antiteza dostojnega dela, za katerega se zavzema MOD. Za 21 milijonov ljudi to ni samo bled spomin iz preteklosti, ampak težka realnost še danes. Mednarodni delovni standardi, ki jih oblikuje MOD, predstavljajo temeljne minimalne socialne standarde, dogovorjene s strani glavnih udeležencev v svetovnem gospodarstvu. Z njimi si MOD prizadeva doseči dostojne delovne pogoje, saj je v današnjem svetu globalizacije za doseganje teh ciljev potrebno ukrepanje na mednarodni ravni. ...

Electrical Characterization of Graphite/InP Schottky Diodes by I-V-T and C-V Methods

Science.gov (United States)

Tiagulskyi, Stanislav; Yatskiv, Roman; Grym, Jan

2018-02-01

A rectifying junction was prepared by casting a drop of colloidal graphite on the surface of an InP substrate. The electrophysical properties of graphite/InP junctions were investigated in a wide temperature range. Temperature-dependent I-V characteristics of the graphite/InP junctions are explained by the thermionic emission mechanism. The Schottky barrier height (SBH) and the ideality factor were found to be 0.9 eV and 1.47, respectively. The large value of the SBH and its weak temperature dependence are explained by lateral homogeneity of the junction, which is related to the structure of the graphite layer. The moderate disagreement between the current-voltage and capacitance-voltage measurements is attributed to the formation of interfacial native oxide film on the InP surface.

Eldre personer er sårbare i ekstreme værsituasjoner

Directory of Open Access Journals (Sweden)

Anette Hylen Ranhoff

2009-10-01

Full Text Available I fjor sommer ble Europa rammet av en hetebølge og tusenvis av eldre mennesker døde. Sammenhengen mellom helsetilstand og påvirkning av klima er kompleks og medisinske, sosiale og miljømessige faktorer er involvert. Imidlertid er hete- og kulderelaterte sykdommer, skade og død i høy grad mulig å forebygge, og det er behov for å analysere denne situasjonen og andre ekstreme værsituasjoner for å kunne sikre helsen til eldre personer ved liknede hendelser i fremtiden.   Artikkelen gir en oversikt over litteratur som omhandler sykelighet og dødelighet som følge av ekstreme værforhold: hete, kulde og situasjoner der transport, elektrisitet og andre leveranser er begrenset, som etter en orkan, enorme snøfall eller liknende. Sammenhenger mellom sykelighet, dødelighet og temperatur i alminnelighet bli også omtalt, med spesielt fokus på de eldre.            Eldre som lever alene og er sosialt isolerte, og spesielt de som har funksjonshemning eller kognitiv svikt har høyest risiko for sykdom, skade og død i ekstreme værsituasjoner. Dette kan trolig i stor grad forebygges. Det anbefales at alle kommuner har kriseplaner for naturkatastrofer og ekstreme værsituasjoner som spesielt inneholder tiltak rettet mot sårbare eldre. Planene bør inneholde generell alarmering og informasjon samt systemer for oppsøkende virksomhet overfor risikogrupper. The 2003 heat wave in Europe was responsible for the deaths of thousands of elderly people. Heat- and cold-related illnesses, injuries and deaths are supposed to be largely preventable, and it is a need for analysing this situation and other situations with extreme weather conditions where elderly people are believed to be particularly vulnerableThis article is a review of the literature concerning morbidity and mortality in extreme weather conditions like heat, cold and situations where transportation, electricity, and other supplies are limited as a consequence of extreme weather

Estimating Parameters for the PVsyst Version 6 Photovoltaic Module Performance Model

Energy Technology Data Exchange (ETDEWEB)

Hansen, Clifford [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

2015-10-01

We present an algorithm to determine parameters for the photovoltaic module perf ormance model encoded in the software package PVsyst(TM) version 6. Our method operates on current - voltage (I - V) measured over a range of irradiance and temperature conditions. We describe the method and illustrate its steps using data for a 36 cell crystalli ne silicon module. We qualitatively compare our method with one other technique for estimating parameters for the PVsyst(TM) version 6 model .

The motor performance progression of future undergraduate students of physical education [Vývoj motorické výkonnosti u uchazečů o vysokoškolské studium tělesné výchovy

Directory of Open Access Journals (Sweden)

Roman Cuberek

2009-12-01

observation; the level of dash performance mostly decreased. However, the last measurement in 2006 indicates some tendency of increasing performance as well as concavity of polynomial functions (trend function at the end of the observed time period. [VÝCHODISKA: Komplex sociálních změn, vzrůstající inaktivity a obezity a dalších negativních faktorů se dle našeho názoru přirozeně projevuje také ve změnách úrovně motorické výkonnosti budoucích vysokoškolských studentů. Dlouhodobý trend motorické výkonnosti proto považujeme za vhodný obraz současného životního stylu uvažované populace. CÍLE: Hlavním cílem této práce bylo popsat dlouhodobý trend dvou vybraných motorických předpokladů u populace uchazečů o vysokoškolské studium TV. METODIKA: Soubor tvořilo 2 012 mužů a 1 705 žen (uchazečů o vysokoškolské studium TV ve věku Mdn = 19 let. Úroveň plavecké a sprinterské výkonnosti byla zjišťována dvěma motorickými testy (plavání 100 m a běh 100 m u příležitosti přijímacího řízení v letech 1991 až 2001 a v roce 2006. VÝSLEDKY: Ve čtyřech případech (dva motorické testy, dvě pohlaví analýza ukazuje na nenulový trend výkonnosti (ve všech případech byl alespoň jeden meziroční rozdíl signifikantní na p = 0,05. V případě sprinterské a plavecké (pouze muži výkonnosti vykazují polynomické funkce trendu v počátku konvexní, později konkávní průběh (změna průběhu v letech 1998–1999. Trend plavecké výkonnosti žen je rostoucí v celé periodě. Konkávnost polynomické funkce naznačuje možnost opětovného nárůstu výkonnosti, jež byla v období 1993–2001 (sprint a 1996–1999 (plavání převážně klesající. ZÁVĚRY: Na základě našich zjištění zamítáme výzkumnou hypotézu a konstatujeme tak existenci významných změn v úrovni plavecké a sprinterské výkonnosti v průběhu sledované periody. Byl zjištěn pozitivní (ženy a převážně pozitivn

40 CFR 63.2354 - What performance tests, design evaluations, and performance evaluations must I conduct?

Science.gov (United States)

2010-07-01

... evaluations, and performance evaluations must I conduct? 63.2354 Section 63.2354 Protection of Environment... tests, design evaluations, and performance evaluations must I conduct? (a)(1) For each performance test... procedures specified in subpart SS of this part. (3) For each performance evaluation of a continuous emission...

Input modelling of ASSERT-PV V2R8M1 for RUFIC fuel bundle

Energy Technology Data Exchange (ETDEWEB)

Park, Joo Hwan; Suk, Ho Chun

2001-02-01

This report describes the input modelling for subchannel analysis of CANFLEX-RU (RUFIC) fuel bundle which has been developed for an advanced fuel bundle of CANDU-6 reactor, using ASSERT-PV V2R8M1 code. Execution file of ASSERT-PV V2R8M1 code was recently transferred from AECL under JRDC agreement between KAERI and AECL. SSERT-PV V2R8M1 which is quite different from COBRA-IV-i code has been developed for thermalhydraulic analysis of CANDU-6 fuel channel by subchannel analysis method and updated so that 43-element CANDU fuel geometry can be applied. Hence, ASSERT code can be applied to the subchannel analysis of RUFIC fuel bundle. The present report was prepared for ASSERT input modelling of RUFIC fuel bundle. Since the ASSERT results highly depend on user's input modelling, the calculation results may be quite different among the user's input models. The objective of the present report is the preparation of detail description of the background information for input data and gives credibility of the calculation results.

Some variations of the Kristallin-I near-field model

International Nuclear Information System (INIS)

Smith, P.A.; Curti, E.

1995-11-01

The Kristallin-I project is an integrated analysis of the final disposal of vitrified high-level radioactive waste (HLW) in the crystalline basement of Northern Switzerland. It includes an analysis of the radiological consequences of radionuclide release from a repository. This analysis employs a chain of independent models for the near-field, geosphere and biosphere. In constructing these models, processes are incorporated that are believed to be relevant to repository safety, while other processes are neglected. In the present report, a set of simplified, steady-state models of the near-field is developed to investigate the possible effects of specific processes which are neglected in the time-dependent Kristallin-I near-field model. These processes are neglected, either because they are thought unlikely to occur to a significant degree, or because they are likely to make a positive contribution to the performance of the near-field barrier to radionuclide migration, but are insufficiently understood to justify incorporating them in a safety assessment. The aim of this report is to investigate whether the arguments for neglecting these processes in the Kristallin-I near-field model can be justified. (author) figs., tabs., refs

Når det er svært at være ung i DK

DEFF Research Database (Denmark)

Nielsen, Jens Christian; Sørensen, Niels Ulrik

Når det er svært at være ung i DK – viden og råd om unges trivsel og mistrivsel er afslutningen på et større forskningsprojekt om unges trivsel og mistrivsel. Hæftet præsenterer forskningsprojektets hovedkonklusioner og giver desuden en række råd og ideer til, hvordan voksne kan hjælpe unge med...... at håndtere mistrivsel. Hæftet er udarbejdet af forskerne Jens Christian Nielsen og Niels Ulrik Sørensen fra Center for Ungdomsforskning. Det er den sidste publikation i forskningsprojektet Når det er svært at være ung i DK, der fra 2008-2011 har belyst unges trivsel og mistrivsel. Projektet bygger både på en...

Commercial cyclotrons. Part I: Commercial cyclotrons in the energy range 10 30 MeV for isotope production

Science.gov (United States)

Papash, A. I.; Alenitsky, Yu. G.

2008-07-01

A survey of commercial cyclotrons for production of medical and industrial isotopes is presented. Compact isochronous cyclotrons which accelerate negative hydrogen ions in the energy range 10 30 MeV have been widely used over the last 25 years for production of medical isotopes and other applications. Different cyclotron models for the energy range 10 12 MeV with moderate beam intensity are used for production of 11C, 13N, 15O, and 18F isotopes widely applied in positron emission tomography. Commercial cyclotrons with high beam intensity are available on the market for production of most medical and industrial isotopes. In this work, the physical and technical parameters of different models are compared. Possibilities of improving performance and increasing intensity of H- beams up to 2 3 mA are discussed.

Some variations of the Kristallin-I near-field model

Energy Technology Data Exchange (ETDEWEB)

Smith, P A; Curti, E [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1995-11-01

The Kristallin-I project is an integrated analysis of the final disposal of vitrified high-level radioactive waste (HLW) in the crystalline basement of Northern Switzerland. It includes an analysis of the radiological consequences of radionuclide release from a repository. This analysis employs a chain of independent models for the near-field, geosphere and biosphere. In constructing these models, processes are incorporated that are believed to be relevant to repository safety, while other processes are neglected. In the present report, a set of simplified, steady-state models of the near-field is developed to investigate the possible effects of specific processes which are neglected in the time-dependent Kristallin-I near-field model. These processes are neglected, either because (i) they are thought unlikely to occur to a significant degree, or because (ii) they are likely to make a positive contribution to the performance of the near-field barrier to radionuclide migration, but are insufficiently understood to justify incorporating them in a safety assessment. The aim of this report is to investigate whether the arguments for neglecting these processes in the Kristallin-I near-field model can be justified. This work addresses the following topics: - radionuclide transport at the bentonite-host rock interface, - canister settlement, -chemical conditions and radionuclide transport at the glass-bentonite interface. (author) figs., tabs., refs.

Some variations of the Kristallin-I near-field model

International Nuclear Information System (INIS)

Smith, P.A.; Curti, E.

1995-11-01

The Kristallin-I project is an integrated analysis of the final disposal of vitrified high-level radioactive waste (HLW) in the crystalline basement of Northern Switzerland. It includes an analysis of the radiological consequences of radionuclide release from a repository. This analysis employs a chain of independent models for the near-field, geosphere and biosphere. In constructing these models, processes are incorporated that are believed to be relevant to repository safety, while other processes are neglected. In the present report, a set of simplified, steady-state models of the near-field is developed to investigate the possible effects of specific processes which are neglected in the time-dependent Kristallin-I near-field model. These processes are neglected, either because (i) they are thought unlikely to occur to a significant degree, or because (ii) they are likely to make a positive contribution to the performance of the near-field barrier to radionuclide migration, but are insufficiently understood to justify incorporating them in a safety assessment. The aim of this report is to investigate whether the arguments for neglecting these processes in the Kristallin-I near-field model can be justified. This work addresses the following topics: - radionuclide transport at the bentonite-host rock interface, - canister settlement, -chemical conditions and radionuclide transport at the glass-bentonite interface. (author) figs., tabs., refs

Modelling Client Satisfaction Levels: The Impact of Contractor Performance

Directory of Open Access Journals (Sweden)

Robby Soetanto

2012-11-01

Full Text Available The performance of contractors is known to be a key determinant of client satisfaction.Here, using factor analysis, clients’ satisfaction is defined in several dimensions. Based onclients’ assessment of contractor performance, a number of satisfaction models developedusing the multiple regression (MR technique are presented. The models identify arange of variables encompassing contractor performance, project performance and respondent(i.e. client attributes as useful predictors of satisfaction levels. Contractor performanceattributes were found to be of utmost importance indicating that clientsatisfaction levels are mainly dependent on the performance of the contractor. Furthermore,findings suggest that subjectivity is to some extent prevalent in clients’ performanceassessment. The models demonstrate accurate and reliable predictive power as confirmedby validation tests. Contractors could use the models to help improve their performanceleading to more satisfied clients. This would also promote the development ofharmonious working relationships within the construction project coalition.

Si and SiC Schottky diodes in smart power circuits: a comparative study by I-V-T and C-V measurements

Energy Technology Data Exchange (ETDEWEB)

Hadzi-Vukovic, J [Infineon Technologies, Siemensstrasse 2, 9500 Villach (Austria); Jevtic, M [Institute for Physics, Pregrevica 118, 11080 Zemun (Serbia and Montenegro); Rothleitner, H [Infineon Technologies, Siemensstrasse 2, 9500 Villach (Austria); Croce, P Del [Infineon Technologies, Siemensstrasse 2, 9500 Villach (Austria)

2005-01-01

In this paper we analyze a possibility of manufacturing and implementation of Schottky diodes in the smart power circuits. Three different Schottky diodes, in three different technologies, are realized in Si and SiC processes. The electrical characterizations with I-V-T and C-V measurements are done for all structures. It is shown that Si based Schottky diodes also are suitable to be integrated in the typical smart power circuits.

Si and SiC Schottky diodes in smart power circuits: a comparative study by I-V-T and C-V measurements

International Nuclear Information System (INIS)

Hadzi-Vukovic, J; Jevtic, M; Rothleitner, H; Croce, P Del

2005-01-01

In this paper we analyze a possibility of manufacturing and implementation of Schottky diodes in the smart power circuits. Three different Schottky diodes, in three different technologies, are realized in Si and SiC processes. The electrical characterizations with I-V-T and C-V measurements are done for all structures. It is shown that Si based Schottky diodes also are suitable to be integrated in the typical smart power circuits

CFD modeling of combustion processes using KIVA3V Code with partially stirred reactor model for turbulence-combustion interactions

International Nuclear Information System (INIS)

Jarnicki, R.; Sobiesiak, A.

2002-01-01

In order to solve the averaged conservation equations for turbulent reacting flow one is faced with a task of specifying the averaged chemical reaction rate. This is due to turbulence influence on the mean reaction rates that appear in the species concentration Reynolds-averaged equation. In order to investigate the Partially Stirred Reactor (PaSR) combustion model capabilities, a CFD modeling using KIVA3V Code with the PaSR model of two very different combustion processes, was performed. Experimental results were compared with modeling

Electronic Structure and I- V Characteristics of InSe Nanoribbons

Science.gov (United States)

Yao, A.-Long; Wang, Xue-Feng; Liu, Yu-Shen; Sun, Ya-Na

2018-04-01

We have studied the electronic structure and the current-voltage ( I-V) characteristics of one-dimensional InSe nanoribbons using the density functional theory combined with the nonequilibrium Green's function method. Nanoribbons having bare or H-passivated edges of types zigzag (Z), Klein (K), and armchair (A) are taken into account. Edge states are found to play an important role in determining their electronic properties. Edges Z and K are usually metallic in wide nanoribbons as well as their hydrogenated counterparts. Transition from semiconductor to metal is observed in hydrogenated nanoribbons HZZH as their width increases, due to the strong width dependence of energy difference between left and right edge states. Nevertheless, electronic structures of other nanoribbons vary with the width in a very limited scale. The I-V characteristics of bare nanoribbons ZZ and KK show strong negative differential resistance, due to spatial mismatch of wave functions in energy bands around the Fermi energy. Spin polarization in these nanoribbons is also predicted. In contrast, bare nanoribbons AA and their hydrogenated counterparts HAAH are semiconductors. The band gaps of nanoribbons AA (HAAH) are narrower (wider) than that of two-dimensional InSe monolayer and increase (decrease) with the nanoribbon width.

Reducing the risk of rear-end collisions with infrastructure-to-vehicle (I2V) integration of variable speed limit control and adaptive cruise control system.

Science.gov (United States)

Li, Ye; Wang, Hao; Wang, Wei; Liu, Shanwen; Xiang, Yun

2016-08-17

Adaptive cruise control (ACC) has been investigated recently to explore ways to increase traffic capacity, stabilize traffic flow, and improve traffic safety. However, researchers seldom have studied the integration of ACC and roadside control methods such as the variable speed limit (VSL) to improve safety. The primary objective of this study was to develop an infrastructure-to-vehicle (I2V) integrated system that incorporated both ACC and VSL to reduce rear-end collision risks on freeways. The intelligent driver model was firstly modified to simulate ACC behavior and then the VSL strategy used in this article was introduced. Next, the I2V system was proposed to integrate the 2 advanced techniques, ACC and VSL. Four scenarios of no control, VSL only, ACC only, and the I2V system were tested in simulation experiments. Time exposed time to collision (TET) and time integrated time to collision (TIT), 2 surrogate safety measures derived from time to collision (TTC), were used to evaluate safety issues associated with rear-end collisions. The total travel times of each scenario were also compared. The simulation results indicated that both the VSL-only and ACC-only methods had a positive impact on reducing the TET and TIT values (reduced by 53.0 and 58.6% and 59.0 and 65.3%, respectively). The I2V system combined the advantages of both ACC and VSL to achieve the most safety benefits (reduced by 71.5 and 77.3%, respectively). Sensitivity analysis of the TTC threshold also showed that the I2V system obtained the largest safety benefits with all of the TTC threshold values. The impact of different market penetration rates of ACC vehicles in I2V system indicated that safety benefits increase with an increase in ACC proportions. Compared to VSL-only and ACC-only scenarios, this integrated I2V system is more effective in reducing rear-end collision risks. The findings of this study provide useful information for traffic agencies to implement novel techniques to improve

Discovery of an imidazopyridine-containing 1,4-benzodiazepine nonpeptide vitronectin receptor (alpha v beta 3) antagonist with efficacy in a restenosis model.

Science.gov (United States)

Keenan, R M; Lago, M A; Miller, W H; Ali, F E; Cousins, R D; Hall, L B; Hwang, S M; Jakas, D R; Kwon, C; Louden, C; Nguyen, T T; Ohlstein, E H; Rieman, D J; Ross, S T; Samanen, J M; Smith, B R; Stadel, J; Takata, D T; Vickery, L; Yuan, C C; Yue, T L

1998-11-17

In the 3-oxo-1,4-benzodiazepine-2-acetic acid series of vitronectin receptor (alpha v beta 3) antagonists, a compound containing an imidazopyridine arginine mimetic was discovered which had sufficient potency and i.v. pharmacokinetics for demonstration of efficacy in a rat restenosis model.

A cluster of patients infected with I221V influenza b virus variants with reduced oseltamivir susceptibility--North Carolina and South Carolina, 2010-2011.

Science.gov (United States)

Garg, Shikha; Moore, Zack; Lee, Nicole; McKenna, John; Bishop, Amber; Fleischauer, Aaron; Springs, Chasisity B; Nguyen, Ha T; Sheu, Tiffany G; Sleeman, Katrina; Finelli, Lyn; Gubareva, Larisa; Fry, Alicia M

2013-03-15

During 2010-2011, influenza B viruses with a novel neuraminidase substitution, denoted I221V (B/I221V), associated with reduced in vitro oseltamivir susceptibility were detected in North Carolina. We determined the prevalence of I221V among B viruses submitted to the Centers for Disease Control and Prevention for antiviral resistance surveillance, including all B viruses submitted to North Carolina and South Carolina state laboratories, during October 2010-September 2011.We conducted chart reviews and telephone interviews to characterize North Carolina and South Carolina patients with B/I221V vs wild-type B virus infection (B/WT). We detected I221V in 45 (22%) of 209 B viruses from North Carolina and 8 (10%) of 82 B viruses from South Carolina. We detected I221V in 3 (0.3%) of 881 B viruses tested from 45 other states. B/I221V infection was not associated with differences in underlying conditions or illness severity, compared with B/WT infection. No patients with B/I221V infection received oseltamivir prior to specimen collection. Among patients who completed oseltamivir, those with B/I221V infection reported a longer duration until illness resolution (5 vs 3 days; P = .02). B/I221V cocirculated with B/WT in North Carolina and South Carolina during 2010-2011. I221V did not alter illness severity but may have reduced oseltamivir effectiveness. Thus, global surveillance for I221V is important.

Kanuti gildi saalis jätkub performance'i-festival "Continental Breakfast Tallinn NU performance" : ...

Index Scriptorium Estoniae

2005-01-01

12. XI Eva Meyer-Kelleri (Saksamaa/Rootsi) etendus "Surm on kindel/Death is Certain". Performance'i esitab Irina Müller. 14. XI esitab Kim H. Veltman (Kanada/Holland) performance'i "Maailmapuu/World Tree". 15. XI Katrin Essensoni etendus "Designed to make Difference"

Comprehensive Simulation Lifecycle Management for High Performance Computing Modeling and Simulation, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — There are significant logistical barriers to entry-level high performance computing (HPC) modeling and simulation (M IllinoisRocstar) sets up the infrastructure for...

Performance modeling of parallel algorithms for solving neutron diffusion problems

International Nuclear Information System (INIS)

Azmy, Y.Y.; Kirk, B.L.

1995-01-01

Neutron diffusion calculations are the most common computational methods used in the design, analysis, and operation of nuclear reactors and related activities. Here, mathematical performance models are developed for the parallel algorithm used to solve the neutron diffusion equation on message passing and shared memory multiprocessors represented by the Intel iPSC/860 and the Sequent Balance 8000, respectively. The performance models are validated through several test problems, and these models are used to estimate the performance of each of the two considered architectures in situations typical of practical applications, such as fine meshes and a large number of participating processors. While message passing computers are capable of producing speedup, the parallel efficiency deteriorates rapidly as the number of processors increases. Furthermore, the speedup fails to improve appreciably for massively parallel computers so that only small- to medium-sized message passing multiprocessors offer a reasonable platform for this algorithm. In contrast, the performance model for the shared memory architecture predicts very high efficiency over a wide range of number of processors reasonable for this architecture. Furthermore, the model efficiency of the Sequent remains superior to that of the hypercube if its model parameters are adjusted to make its processors as fast as those of the iPSC/860. It is concluded that shared memory computers are better suited for this parallel algorithm than message passing computers

Local delivery of 131I-MIBG to treat peritoneal neuroblastoma

International Nuclear Information System (INIS)

Kinuya, Seigo; Li, Xiao-Feng; Yokoyama, Kunihiko; Michigishi, Takatoshi; Tonami, Norihisa; Mori, Hirofumi; Shiba, Kazuhiro; Watanabe, Naoto; Shuke, Noriyuki; Bunko, Hisashi

2003-01-01

Internal radiotherapy involving systemic administration of iodine-131 metaiodobenzylguanidine ( 131 I-MIBG) in neural crest tumours such as neuroblastoma has shown considerable success. Although peritoneal seeding of neuroblastoma occurs less often than metastases to organs such as the liver, no effective treatments exist in this clinical setting. Previous reports have demonstrated the effectiveness of peritoneal application of chemotherapeutic drugs or radiolabelled monoclonal antibodies in several kinds of carcinomas. Local delivery of 131 I-MIBG should produce more favourable dosimetry in comparison with its systemic administration in the treatment of peritoneal neuroblastoma. In the current investigation, a peritoneal model of neuroblastoma was established in Balb/c nu/nu mice by i.p. injection of SK-N-SH neuroblastoma cells. Two weeks after cell inoculation, comparative biodistribution studies were performed following i.v. or i.p. administration of 131 I-MIBG. Mice were treated with 55.5 MBq of 131 I-MIBG administered either i.v. or i.p. at 2 weeks. Intraperitoneal injection of 131 I-MIBG produced significantly higher tumour accumulation than did i.v. injection (P 131 I-MIBG failed to improve the survival of mice; mean survival of untreated mice and mice treated with i.v. administration of 131 I-MIBG was 59.3±3.9 days and 60.6±2.8 days, respectively. On the other hand, radiotherapy delivered via i.p. administration of 131 I-MIBG prolonged survival of mice to 94.7±17.5 days (P 131 I-MIBG therapy). Radiation doses absorbed by tumours at 55.5 MBq of 131 I-MIBG were estimated to be 4,140 cGy with i.p. injection and 450 cGy with i.v. injection. These results indicate the benefits of locoregional delivery of 131 I-MIBG in the treatment of peritoneal neuroblastoma. (orig.)

Performance management i et tværdisciplinært perspektiv

DEFF Research Database (Denmark)

Friis, Ivar; Hansen, Allan

2013-01-01

Performance management er et begreb, der har vundet større og større indpas i både private virksomheder og offentlige organisationer. Mange bruger performance management, og mange giver det indhold og betydning. I denne artikel præsenterer vi et tværdisciplinært perspektiv på performance management...... i bestræbelserne på at komme tættere på, hvordan forskellige discipliner indenfor samfundsvidenskaben kan bruges til at forklare forskellige tilgange til performance management. Vi viser, at et økonomisk perspektiv på performance management repræsenterer en grundlæggende idé om at "bringe markedet...... ind i virksomheden" ved hjælp af konkurrence, stærke finansielle incitamenter og en udpræget grad af decentralisering med så lidt ledelsesinvolvering som muligt. Heroverfor står et psykologisk perspektiv på performance management, der bygger på en idé om at udnytte potentialerne i mennesket fuldt ud...

Separation of hadronic W and Z decays in the CLIC_ILD and the CLICdet detector models at 1.4 and 3TeV

CERN Document Server

AUTHOR|(SzGeCERN)793139; Roloff, Philipp Gerhard; Strom, Lars Rickard; Weber, Matthias Artur

2017-01-01

A study of the W and Z separation was performed for the CLIC_ILD and the CLICdet detector models for the proposed Compact Linear Collider (CLIC). Comparisons were done for fully-hadronic WW and ZZ events at the collision energies of 1.4 and 3 TeV. Particle flow objects are reconstructed using a full simulation of the events including relevant beam-induced background processes. Several different collections of particles, with varying level of background suppression, were compared for each of the detector models and optimal jet clustering parameters were found in each case, resulting in the best separation of the W and Z mass peaks. The CLICdet detector model performs similar to CLIC_ILD with an achieved jet mass separation of around 1.6 $\\sigma$ at 1.4 TeV and 1.3 $\\sigma$ at 3 TeV. For both detector models we achieve a better separation at 1.4 TeV when comparing dijet masses rather than large-R jet masses. At 3 TeV jets with a radius around R=0.5 perform similarly well as dijets.

Performances of large BGO crystals below 20 MeV

International Nuclear Information System (INIS)

Burq, J.P.; Chemarin, M.; El Mamouni, H.

1986-11-01

This paper presents the performances of large tapered BGO crystals to low energy photons of 6 to 20 MeV. The read-out of the crystals was made with large area photodiodes associated to shaping amplifiers

A position sensitive detector using a NaI(Tl)/photomultiplier tube combination for the energy range 200 keV to 10 MeV

International Nuclear Information System (INIS)

Court, A.J.; Dean, A.J.; Yearworth, M.; Younis, F.; Chiappetti, L.; Perotti, F.; Villa, G.; Ubertini, P.; La Padula, C.

1988-01-01

The performance of the position sensitive detector for the ZEBRA low energy gamma-ray imaging telescope is described. The detector consists of 9 position sensitive NaI(Tl) elements each 5.8x5.0x56.0 cm viewed at either end of the long axis by 2 in. photomultiplier tubes. The total active area is 2470 cm 2 with an average positional resolution of 2.1 cm and energy resolution of 15% FWHM at 661.6 keV. The method of flight calibration is described together with the provision within the on-board electronics to correct for sources of error in the calculation of event energy loss and position. The results presented are obtained from the calibration phase of the ZEBRA telescope project. (orig.)

Scanning transient current study of the I-V stabilization phenomena in silicon detectors irradiated by fast neutrons

International Nuclear Information System (INIS)

Eremin, V.; Verbitskaya, E.; Sidorov, A.; Fretwurst, E.; Lindstrom, G.

1996-03-01

Investigation of the I-V stabilization phenomena in neutron irradiated silicon detectors has been carried out using scanning transient current technique (STCT) on non-irradiated PP + -p-n + detectors. The PP + -p-n + detectors were used to simulate the PP + -n-n + detectors irradiated beyond the space charge sign inversion (SCSI). Two mechanisms partially responsible for the I- V stabilization have been identified

30 CFR 57.22205 - Doors on main fans (I-A, II-A, III, and V-A mines).

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Doors on main fans (I-A, II-A, III, and V-A... main fans (I-A, II-A, III, and V-A mines). In mines ventilated by multiple main fans, each main fan... reversal through the fan. The doors shall be located so that they are not in direct line with explosive...

The irradiance and temperature dependent mathematical model for estimation of photovoltaic panel performances

International Nuclear Information System (INIS)

Barukčić, M.; Ćorluka, V.; Miklošević, K.

2015-01-01

Highlights: • The temperature and irradiance dependent model for the I–V curve estimation is presented. • The purely mathematical model based on the analysis of the I–V curve shape is presented. • The model includes the Gompertz function with temperature and irradiance dependent parameters. • The input data are extracted from the data sheet I–V curves. - Abstract: The temperature and irradiance dependent mathematical model for photovoltaic panel performances estimation is proposed in the paper. The base of the model is the mathematical function of the photovoltaic panel current–voltage curve. The model of the current–voltage curve is based on the sigmoid function with temperature and irradiance dependent parameters. The temperature and irradiance dependencies of the parameters are proposed in the form of analytic functions. The constant parameters are involved in the analytical functions. The constant parameters need to be estimated to get the temperature and irradiance dependent current–voltage curve. The mathematical model contains 12 constant parameters and they are estimated by using the evolutionary algorithm. The optimization problem is defined for this purpose. The optimization problem objective function is based on estimated and extracted (measured) current and voltage values. The current and voltage values are extracted from current–voltage curves given in datasheet of the photovoltaic panels. The new procedure for estimation of open circuit voltage value at any temperature and irradiance is proposed in the model. The performance of the proposed mathematical model is presented for three different photovoltaic panel technologies. The simulation results indicate that the proposed mathematical model is acceptable for estimation of temperature and irradiance dependent current–voltage curve and photovoltaic panel performances within temperature and irradiance ranges

Separation of uranium(V I) from binary solution mixtures with thorium(IV), zirconium(IV) and cerium(III) by foaming

International Nuclear Information System (INIS)

Shakir, K.; Aziz, M.; Benyamin, K.

1992-01-01

Foam separation has been investigated for the removal of uranium(V I), thorium(IV), zirconium(IV) and cerium(III) from dilute aqueous solutions at pH values ranging from about I to about II. Sodium laurel sulphate (Na L S) and acetyl trimethyl ammonium bromide (CTAB), being a strong anionic and a strong cationic surfactants, were used as collectors. The results indicate that Na L S can efficiently remove thorium(IV), zirconium(IV) and cerium(III) but not uranium(V I). CTAB, on the other hand, can successfully float only uranium(V I) and zirconium(IV). These differences in flotation properties of the different cations could be used to establish methods for the separation of uranium(V I) from binary mixtures with thorium(IV), zirconium(IV) or cerium(III). The results are discussed in terms of the hydrolytic behaviour of the tested cations and properties of used collectors.2 fig., 1 tab

V&V framework

Energy Technology Data Exchange (ETDEWEB)

Hills, Richard G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Maniaci, David Charles [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Naughton, Jonathan W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-09-01

A Verification and Validation (V&V) framework is presented for the development and execution of coordinated modeling and experimental program s to assess the predictive capability of computational models of complex systems through focused, well structured, and formal processes.The elements of the framework are based on established V&V methodology developed by various organizations including the Department of Energy, National Aeronautics and Space Administration, the American Institute of Aeronautics and Astronautics, and the American Society of Mechanical Engineers. Four main topics are addressed: 1) Program planning based on expert elicitation of the modeling physics requirements, 2) experimental design for model assessment, 3) uncertainty quantification for experimental observations and computational model simulations, and 4) assessment of the model predictive capability. The audience for this document includes program planners, modelers, experimentalist, V &V specialist, and customers of the modeling results.

Investigation on I-V for Different Heating Temperatures of Nanocomposited MEH-PPV:CNTs Organic Solar Cells

Directory of Open Access Journals (Sweden)

M. S. P. Sarah

2012-01-01

Full Text Available This paper discussed the effect of different thermal evaporation treatments for nanocomposited MEH-PPV:CNTs thin films towards the performance of organic solar cells. The configuration of the organic solar cells is ITO/MEH-PPV:CNTs/Au. The heating temperature was varied from, as deposited, 50°C, 75°C, and 100°C. From the results, we observed that the efficiency increase slightly before decreasing back at 100°C. The highest efficiency was solar cells heated at 75°C with efficiency 0.001% which is supported by the I-V characteristics and also by the absorption spectra.

R,D&I in Electric Sector: a Management Model

Directory of Open Access Journals (Sweden)

Edmilson Alves de Moraes

2013-04-01

Full Text Available This study was carried out with the support of the companies of Eletrobras (Chesf, Furnas, Eletronorte and Eletrosul and seeks to develop an integrated management model that incorporates technology and innovation. The model should be concerned with the performance of companies, aligning R, D&I [Research, Development and Innovation] projects with business strategies. The project was undertaken by an in-depth bibliographical review of the subject and a series of guided interviews. These interviews were conducted in both national and international companies that were regarded as innovative in several different sectors, in an attempt to identify practices that could be employed by companies in the electric sector. The findings of this research allowed the development of an integrated R,D&I Management model which is formally set out here as the results of this study.

Comparative kinetic and energetic modelling of phyllosemiquinone oxidation in Photosystem I.

Science.gov (United States)

Santabarbara, Stefano; Zucchelli, Giuseppe

2016-04-14

The oxidation kinetics of phyllo(semi)quinone (PhQ), which acts as an electron transfer (ET) intermediate in the Photosystem I reaction centre, are described by a minimum of two exponential phases, characterised by lifetimes in the 10-30 ns and 150-300 ns ranges. The fastest phase is considered to be dominated by the oxidation of the PhQ molecule coordinated by the PsaB reaction centre subunit (PhQB), and the slowest phase is dominated by the oxidation of the PsaA coordinated PhQ (PhQA). Testing different energetic schemes within a unified theory-based kinetic modelling approach provides reliable limit-values for some of the physical-chemical parameters controlling these ET reactions: (i) the value of ΔG(0) associated with PhQA oxidation is smaller than ∼+30 meV; (ii) the value of the total reorganisation energy (λt) likely exceeds 0.7 eV; (iii) different mean nuclear modes are coupled to PhQB and PhQA oxidation, the former being larger, and both being ≥100 cm(-1).

I=0, C=-1 mesons from 1940 to 2410 MeV

CERN Document Server

Anisovich, A.V.; Batty, C.J.; Bugg, D.V.; Montanet, L.; Nikonov, V.A.; Sarantsev, A.V.; Sarantsev, V.V.; Zou, B.S.

2011-01-01

New Crystal Barrel data are reported for pbar-p -> omega-eta and pbar-p -> omega-pizero-pizero with omega decaying to piplus-piminus-pizero. The omega-eta data confirm angular distributions obtained earlier from data where omega -> pizero-gamma. The new omega-eta data provide accurate measurements of vector and tensor polarisations of the omega and lead to considerable improvements in masses and widths of s-channel resonances. A new J^PC = 3^+- I = 0 resonance is observed with mass M = 2025+-20 MeV and width Gamma = 145+-30 MeV. Polarisation is close to zero everywhere and tensor polarisations are large, as is the case also for pbar-p -> omega-pizero.

An Intelligent V2I-Based Traffic Management System

OpenAIRE

Milanés , Vicente; Villagra , Jorge; Godoy , Jorge; Simó , Javier; Pérez Rastelli , Joshué; Onieva , Enrique

2012-01-01

International audience; Vehicles equipped with intelligent systems designed to prevent accidents, such as collision warning systems (CWSs) or lane-keeping assistance (LKA), are now on the market. The next step in reducing road accidents is to coordinate such vehicles in advance not only to avoid collisions but to improve traffic flow as well. To this end, vehicle-to-infrastructure (V2I) communications are essential to properly manage traffic situations. This paper describes the AUTOPIA approach ...

Betaler det sig? Fleksibilitet og løn i den danske flexicurity-model

DEFF Research Database (Denmark)

Ibsen, Flemming

2007-01-01

Indkomstsikkerhed er at bevæge sig fra et job til at andet og få en højere løn, men er det tilfældet i dan danske flexicurity-model, betaler det sig at være fleksibel? Belønnes numerisk ekstern fleksibiblitet højrere end intern funktionel fleksibilbitet? Artiklen viser, at det bedst kan betale si...

I.V.P. Reisid ja VS Angiras nüüd ühe mütsi all / Irina Kiviselg

Index Scriptorium Estoniae

Kiviselg, Irina, 1961-

2004-01-01

Ilmunud ka: Severnoje Poberezhje, 14. apr. 2004, lk. 4. Ida-Virumaa bussiettevõte I.V.P. Reisid vahetas omanikku, muutudes ettevõtte Kris Kütus üheks osaks. VS Angirase ja I.V.P. Reiside omanik on Boriss Dantshenko

KENO3D, Visualisation Tool for KENO V.A and KENO-VI Geometry Models

International Nuclear Information System (INIS)

2008-01-01

1 - Description of program or function: The KENO3D Visualization Tool for KENO Geometry Models is a powerful state-of-the-art visualization tool that enables KENO V.a users and KENO-VI to interactively display their three-dimensional geometry models. The KENO3D interactive options include: - Shaded or wire-frame images ; - Standard views such as top view, side view, front view, and isometric(3-D) view; - Rotating the model ; - Zooming in on selected locations ; - Selecting parts of the model to display ; - Editing colors and displaying legends ; - Displaying properties of any unit in the model ; - Creating cut-away views ; - Removing units from the model; - Printing image or saving image to a common graphics formats. KENO3D was developed for use by criticality safety specialists that use the KENO three-dimensional Monte Carlo criticality computer code. KENO V.a and KENO-VI are part of the SCALE (Standardized Computer Analyses for Licensing Evaluations) computer software system developed at Ridge National Laboratory (ORNL) that is widely used and accepted around the world for criticality safety analyses. 2 - Methods: KENO3D reads CSAS, KENO V.a, or KENO-VI input files. It attempts to verify that the KENO geometry input is 'legal', i.e., it conforms to the code input guidelines. KENO3D prints a warning message for illegal geometry input, and if possible, it displays the illegal KENO geometry to facilitate debugging of the input. Problems with more than 300,000 KENO V.a bodies have been successfully tested and displayed. KENO3D has the look and feel of a typical PC Windows application. Toolbar buttons are included for all major menu options. There is a setup dialog that allows the user to specify toolbars that should be displayed

The role of bulk and interface states on performance of a-Si: H p-i-n solar cells using reverse current-voltage technique

International Nuclear Information System (INIS)

Mahmood, S A; Kabir, M Z; Murthy, R V R; Dutta, V

2009-01-01

The defect state densities in the bulk of the i-layer and at the p/i interface have been studied in hydrogenated amorphous silicon (a-Si : H) solar cells using reverse current-voltage (J-V) measurements. In this work the cells have been soaked with blue and red lights prior to measurements. The voltage-dependent reverse current has been analysed on the basis of thermal generation of the carriers from midgap states in the i-layer and the carrier injection through the p/i interface. Based on the reverse current behaviour, it has been analysed that at lower reverse bias (reverse voltage, V r r ∼ 25 V) the defect states at the p/i interface are contributing to the reverse currents. The applied reverse bias annealing (RBA) treatment on these cells shows more significant annihilation of defect states at the p/i interface as compared with the bulk of the i-layer. An analytical model is developed to explain the observed behaviour. There is good agreement between the theory and the experimental observations. The fitted defect state densities are 9.1 x 10 15 cm -3 and 8 x 10 18 cm -3 in the bulk of the i-layer and near the p/i interface, respectively. These values decrease to 2.5 x 10 15 cm -3 and 6 x 10 17 cm -3 , respectively, in the samples annealed under reverse bias at 2 V.

Can Linear Regression Modeling Help Clinicians in the Interpretation of Genotypic Resistance Data? An Application to Derive a Lopinavir-Score

DEFF Research Database (Denmark)

Cozzi-Lepri, Alessandro; Prosperi, Mattia C F; Kjær, Jesper

2011-01-01

explored the potential of linear regression to construct a simple predictive model for lopinavir/r-based TCE. Although, the performance of our proposed score was similar to that of already existing IS, previously unrecognized lopinavir/r-associated mutations were identified. The analysis illustrates......BACKGROUND: The question of whether a score for a specific antiretroviral (e.g. lopinavir/r in this analysis) that improves prediction of viral load response given by existing expert-based interpretation systems (IS) could be derived from analyzing the correlation between genotypic data......). Our analysis identified mutations V82A, I54V, K20I and I62V, which were associated with reduced viral response and mutations I15V and V91S which determined lopinavir/r hypersensitivity. All models performed equally well (ASE on test ranging between 1.1 and 1.3, p¿=¿0.34). CONCLUSIONS: We fully...

Development Of A Parallel Performance Model For The THOR Neutral Particle Transport Code

Energy Technology Data Exchange (ETDEWEB)

Yessayan, Raffi; Azmy, Yousry; Schunert, Sebastian

2017-02-01

The THOR neutral particle transport code enables simulation of complex geometries for various problems from reactor simulations to nuclear non-proliferation. It is undergoing a thorough V&V requiring computational efficiency. This has motivated various improvements including angular parallelization, outer iteration acceleration, and development of peripheral tools. For guiding future improvements to the code’s efficiency, better characterization of its parallel performance is useful. A parallel performance model (PPM) can be used to evaluate the benefits of modifications and to identify performance bottlenecks. Using INL’s Falcon HPC, the PPM development incorporates an evaluation of network communication behavior over heterogeneous links and a functional characterization of the per-cell/angle/group runtime of each major code component. After evaluating several possible sources of variability, this resulted in a communication model and a parallel portion model. The former’s accuracy is bounded by the variability of communication on Falcon while the latter has an error on the order of 1%.

Non-syndromic hearing loss caused by the dominant cis mutation R75Q with the recessive mutation V37I of the GJB2 (Connexin 26) gene.

Science.gov (United States)

Kim, Juwon; Jung, Jinsei; Lee, Min Goo; Choi, Jae Young; Lee, Kyung-A

2015-06-19

GJB2 alleles containing two cis mutations have been rarely found in non-syndromic hearing loss. Herein, we present a Korean patient with non-syndromic hearing loss caused by the R75Q cis mutation with V37I, which arose de novo in the father and was inherited by the patient. Biochemical coupling and hemichannel permeability assays were performed after molecular cloning and transfection of HEK293T cells. Student's t-tests or analysis of variance followed by Tukey's multiple comparison test was used as statistical analysis. Biochemical coupling was significantly reduced in connexin 26 (Cx26)-R75Q- and Cx26-V37I-transfected cells, with greater extent in Cx26-R75Q and Cx26-R75Q+V37I cells. Interestingly, our patient and his father with the mutations had more residual hearing compared with patients with the dominant mutation alone. Although the difference in hemichannel activity between R75Q alone and R75Q in combination with V37I failed to reach significance, it is of note that there is a possibility that V37I located upstream of R75Q might have the ability to ameliorate R75Q expression. Our study emphasizes the importance of cis mutations with R75Q, as the gene effect of R75Q can be modulated depending on the type of additional mutation.

The Invasive Species Forecasting System (ISFS): An iRODS-Based, Cloud-Enabled Decision Support System for Invasive Species Habitat Suitability Modeling

Science.gov (United States)

Gill, Roger; Schnase, John L.

2012-01-01

The Invasive Species Forecasting System (ISFS) is an online decision support system that allows users to load point occurrence field sample data for a plant species of interest and quickly generate habitat suitability maps for geographic regions of interest, such as a national park, monument, forest, or refuge. Target customers for ISFS are natural resource managers and decision makers who have a need for scientifically valid, model- based predictions of the habitat suitability of plant species of management concern. In a joint project involving NASA and the Maryland Department of Natural Resources, ISFS has been used to model the potential distribution of Wavyleaf Basketgrass in Maryland's Chesapeake Bay Watershed. Maximum entropy techniques are used to generate predictive maps using predictor datasets derived from remotely sensed data and climate simulation outputs. The workflow to run a model is implemented in an iRODS microservice using a custom ISFS file driver that clips and re-projects data to geographic regions of interest, then shells out to perform MaxEnt processing on the input data. When the model completes, all output files and maps from the model run are registered in iRODS and made accessible to the user. The ISFS user interface is a web browser that uses the iRODS PHP client to interact with the ISFS/iRODS- server. ISFS is designed to reside in a VMware virtual machine running SLES 11 and iRODS 3.0. The ISFS virtual machine is hosted in a VMware vSphere private cloud infrastructure to deliver the online service.

ASSESSING INDIVIDUAL PERFORMANCE ON INFORMATION TECHNOLOGY ADOPTION: A NEW MODEL

OpenAIRE

Diah Hari Suryaningrum

2012-01-01

This paper aims to propose a new model in assessing individual performance on information technology adoption. The new model to assess individual performance was derived from two different theories: decomposed theory of planned behavior and task-technology fit theory. Although many researchers have tried to expand these theories, some of their efforts might lack of theoretical assumptions. To overcome this problem and enhance the coherence of the integration, I used a theory from social scien...

Changes in histoanatomical distribution of types I, III and V collagen promote adaptative remodeling in posterior tibial tendon rupture

Directory of Open Access Journals (Sweden)

Érika Satomi

2008-01-01

Full Text Available INTRODUCTION: Posterior tibial tendon dysfunction is a common cause of adult flat foot deformity, and its etiology is unknown. PURPOSE: In this study, we characterized the morphologic pattern and distribution of types I, III and V collagen in posterior tibial tendon dysfunction. METHOD: Tendon samples from patients with and without posterior tibial tendon dysfunction were stained by immunofluorescence using antibodies against types I, III and V collagen. RESULTS: Control samples showed that type V deposited near the vessels only, while surgically obtained specimens displayed type V collagen surrounding other types of collagen fibers in thicker adventitial layers. Type III collagen levels were also increased in pathological specimens. On the other hand, amounts of collagen type I, which represents 95% of the total collagen amount in normal tendon, were decreased in pathological specimens. CONCLUSION: Fibrillogenesis in posterior tibial tendon dysfunction is altered due to higher expression of types III and V collagen and a decreased amount of collagen type I, which renders the originating fibrils structurally less resistant to mechanical forces.

Expozice žáků aerosolu při hodinách tělesné výchovy

OpenAIRE

Šafránek, Jiří; Turčová, Ivana; Braniš, Martin; Hájek, Michal

2017-01-01

Při zvýšené fyzické zátěži člověk nadýchá větší množství vzduchu včetně škodlivin a jiným způsobem než v klidovém režimu. Prostředí tělocvičen je v mnoha ohledech náchylné k vysokým koncentracím aerosolu (PM), který se v nich kumuluje a během tělesné výchovy (TV) se pohybem a činností cvičících resuspenduje. Koncentrace PM (především jeho hrubé frakce) se tak podle množství cvičenců a charakteru činnosti při cvičení výrazně zvyšují. Cílem naší studie bylo odhadnout expozici aerosolu za podmín...

Prediction of Cognitive Performance and Subjective Sleepiness Using a Model of Arousal Dynamics.

Science.gov (United States)

Postnova, Svetlana; Lockley, Steven W; Robinson, Peter A

2018-04-01

A model of arousal dynamics is applied to predict objective performance and subjective sleepiness measures, including lapses and reaction time on a visual Performance Vigilance Test (vPVT), performance on a mathematical addition task (ADD), and the Karolinska Sleepiness Scale (KSS). The arousal dynamics model is comprised of a physiologically based flip-flop switch between the wake- and sleep-active neuronal populations and a dynamic circadian oscillator, thus allowing prediction of sleep propensity. Published group-level experimental constant routine (CR) and forced desynchrony (FD) data are used to calibrate the model to predict performance and sleepiness. Only the studies using dim light (performance measures during CR and FD protocols, with sleep-wake cycles ranging from 20 to 42.85 h and a 2:1 wake-to-sleep ratio. New metrics relating model outputs to performance and sleepiness data are developed and tested against group average outcomes from 7 (vPVT lapses), 5 (ADD), and 8 (KSS) experimental protocols, showing good quantitative and qualitative agreement with the data (root mean squared error of 0.38, 0.19, and 0.35, respectively). The weights of the homeostatic and circadian effects are found to be different between the measures, with KSS having stronger homeostatic influence compared with the objective measures of performance. Using FD data in addition to CR data allows us to challenge the model in conditions of both acute sleep deprivation and structured circadian misalignment, ensuring that the role of the circadian and homeostatic drives in performance is properly captured.

http://dx.doi.org/10.4314/ajtcam.v10i4.6

African Journals Online (AJOL)

AJTCAM

http://dx.doi.org/10.4314/ajtcam.v10i4.6. 36. CHEMOTHERAPEUTIC ACTIVITIES OF CARTHAMI FLOS AND ITS REVERSAL EFFECT ON. MULTIDRUG RESISTANCE IN CANCER CELLS. Jimmy Yiu-Cheong Wu*a, Zhi-Ling Yub, Wang-Fun Fongb, Yi-Qian Shia. aZhejiang Chinese Medical University, Hangzhou 310053, ...

CEBAF SRF Performance during Initial 12 GeV Commissioning

International Nuclear Information System (INIS)

Bachimanchi, Ramakrishna; Allison, Trent; Daly, Edward; Drury, Michael; Hovater, J; Lahti, George; Mounts, Clyde; Nelson, Richard; Plawski, Tomasz

2015-09-01

The Continuous Electron Beam Accelerator Facility (CEBAF) energy upgrade from 6 GeV to 12 GeV includes the installation of eleven new 100 MV cryomodules (88 cavities). The superconducting RF cavities are designed to operate CW at an accelerating gradient of 19.3 MV/m with a Q L of 3x10 7 . Not all the cavities were operated at the minimum gradient of 19.3 MV/m with the beam. Though the initial 12 GeV milestones were achieved during the initial commissioning of CEBAF, there are still some issues to be addressed for long term reliable operation of these modules. This paper reports the operational experiences during the initial commissioning and the path forward to improve the performance of C100 (100 MV) modules.

Comparison among mathematical models of the photovoltaic cell for computer simulation purposes

Science.gov (United States)

Tofoli, Fernando Lessa; Pereira, Denis de Castro; Josias De Paula, Wesley; Moreira Vicente, Eduardo; Vicente, Paula dos Santos; Braga, Henrique Antonio Carvalho

2017-07-01

This paper presents a comparison among mathematical models used in the simulation of solar photovoltaic modules that can be easily integrated with power electronic converters. In order to perform the analysis, three models available in literature and also the physical model of the module in software PSIM® are used. Some results regarding the respective I × V and P × V curves are presented, while some advantages and eventual limitations are discussed. Besides, a DC-DC buck converter performs maximum power point tracking by using perturb and observe method, while the performance of each one of the aforementioned models is investigated.

Technical difficulties and challenges for performing safety analysis on digital I and C systems

International Nuclear Information System (INIS)

Yih, Swu

1996-01-01

Performing safety analysis on digital I and C systems is an important task for nuclear safety analysts. The analysis results can not only confirm that the system is well-developed but also provide crucial evidence for licensing process. However, currently both I and C developers and regulators have difficulties in evaluating the safety of digital I and C systems. To investigate this problem, this paper propose a frame-based model to analyze the working and failure mechanisms of software and its interaction with the environment. Valid isomorphic relationship between the logical (software) and the physical (hardware environment) frame is identified as a major factor that determines the safe behavior of the software. The failures that may potentially cause the violation of isomorphic relations are also discussed. To perform safety analysis on digital I and C systems, analysts need to predict the effects incurred by such failures. However, due to lack of continuity, regularity, integrity, and high complexity of software structure, software does not have a stable and predictable pattern of behavior, which in turn makes the trustworthiness of results of software safety analysis susceptible. Our model can explain many troublesome events experienced by computer controlled systems. Implications and possible directions for improvement are also discussed. (author)

Zatížení větrem na chladící věž

OpenAIRE

Ehrlich, Tomáš

2015-01-01

Práce se zabývá studiem proudění vzduchu a stanovením účinků na tenkostěnný plášť chladící věže. Jsou prezentovány dva výpočetní modely pro mechaniku tekutin – osamělá chladící věž a skupina čtyř chladících věží. Součástí práce je i strukturální model chladící věže doplněný metodikou pro přenos tlakového zatížení z CFD výpočtu. Thesis is concerned with modeling fluid dynamics and computing wind load on thin-walled structure of cooling tower. Two models for computational fluid dynamics are ...

Monte-Carlo simulations of secondary electron emission from CsI, induced by 1-10 keV X-rays and electrons

International Nuclear Information System (INIS)

Akkerman, A.; Gibrekhterman, A.; Breskin, A.; Chechik, R.

1992-05-01

A model for electron transport and emission in CsI is proposed. It is based on theoretically calculated microscopic cross-sections for electron interaction with the nuclear and the electronic components of the solid. A Monte Carlo program based on this model was developed to simulate secondary electron emission induced by X-rays and electrons in the energy range of 1 to 10 keV. The calculated secondary emission yields agree with existing experimental data. The model provides all necessary characteristics for the design of radiation detectors based on secondary electron emission. It can be expanded to higher incident energies and other alkali halides. (author)

Performance comparison of two androgen receptor splice variant 7 (AR-V7) detection methods.

Science.gov (United States)

Bernemann, Christof; Steinestel, Julie; Humberg, Verena; Bögemann, Martin; Schrader, Andres Jan; Lennerz, Jochen K

2018-01-23

To compare the performance of two established androgen receptor splice variant 7 (AR-V7) mRNA detection systems, as paradoxical responses to next-generation androgen-deprivation therapy in AR-V7 mRNA-positive circulating tumour cells (CTC) of patients with castration-resistant prostate cancer (CRPC) could be related to false-positive classification using detection systems with different sensitivities. We compared the performance of two established mRNA-based AR-V7 detection technologies using either SYBR Green or TaqMan chemistries. We assessed in vitro performance using eight genitourinary cancer cell lines and serial dilutions in three AR-V7-positive prostate cancer cell lines, as well as in 32 blood samples from patients with CRPC. Both assays performed identically in the cell lines and serial dilutions showed identical diagnostic thresholds. Performance comparison in 32 clinical patient samples showed perfect concordance between the assays. In particular, both assays determined AR-V7 mRNA-positive CTCs in three patients with unexpected responses to next-generation anti-androgen therapy. Thus, technical differences between the assays can be excluded as the underlying reason for the unexpected responses to next-generation anti-androgen therapy in a subset of AR-V7 patients. Irrespective of the method used, patients with AR-V7 mRNA-positive CRPC should not be systematically precluded from an otherwise safe treatment option. © 2018 The Authors BJU International © 2018 BJU International Published by John Wiley & Sons Ltd.

Change of I-V characteristics of SiC diodes upon reactor irradiation; Modification des caracteristiques I-V de jonctions p-n au SiC du fait d'une irradiation dans un reacteur; Izmeneniya kharakteristik I-V vyrashchennogo v SiC perekhoda tipa p-n posle oblucheniya ego v reaktore; Modificaciones que sufren por irradiacion en un reactor las caracteristicas I-V de uniones p-n en SiC

Energy Technology Data Exchange (ETDEWEB)

Heerschap, M; De Coninck, R [Solid State Physics Dept., SCK-CEN, Mol (Belgium)

1962-04-15

In search for semiconductors, which can be used in high-flux reactors in order to measure flux distributions, we irradiated SiC p-n junctions in the Belgium BR-1 reactor. Two types of SiC-diodes of different origin have been irradiated. These junctions are grown in the Lely-furnace. The change in forward and reverse characteristics have been measured during and after irradiation up to temperatures of 150{sup o}C, while measurements up to a temperature of 500{sup o}C are in progress. It has been found that one type resists BR-1 neutrons up to an integrated flux of 10{sup 15} n/cm{sup 2}, while the other resists irradiation up to a flux of 10{sup 17} n/cm{sup 2}. The changes in characteristics are given as well as the result of some annealing experiments. (author) [French] En recherchant des semi-conducteurs pouvant servir a mesurer les distributions de flux dans les reacteurs a haut flux de neutrons, les auteurs ont irradie des jonctions p-n au SiC dans le reacteur belge BR-1. Deux types de diodes a SiC d'origines differentes ont ete ainsi irradies. Les jonctions en question sont preparees par etirage dans le four Lely. Les auteurs ont mesure les modifications subies par les caracteristiques I-V apres et pendant l'irradiation a des temperatures allant jusqu'a 150{sup o}C; ils poursuivent leurs mesures dans la gamme des temperatures allant de 150{sup o}C a 500{sup o}C. Us ont constate que l'un des types de diode a SiC resiste aux neutrons du reacteur BR-1 jusqu'a 10{sup 15} n/cm{sup 2}, tandis que l'autre type resiste a l'irradiation jusqu'a 10{sup 17} n/cm{sup 2}. Les auteurs indiquent les modifications subies par les caracteristiques, ainsi que le resultat de certaines experiences de recuit. (author) [Spanish] Los autores estan tratando de encontrar semiconductores con los que sea posible medir distribuciones de flujo en reactores de flujo elevado, y con este fin irradiaron uniones p-n del SiC en el reactor BR-1 de Belgica. Irradiaron dos tipos de diodos de SiC de

30 CFR 57.22204 - Main fan operation and inspection (I-A, II-A, III, and V-A mines).

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Main fan operation and inspection (I-A, II-A, III, and V-A mines). 57.22204 Section 57.22204 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... Main fan operation and inspection (I-A, II-A, III, and V-A mines). Main fans shall be— (a) Provided...

Anti pp searches for quark-gluon plasma at TeV I

International Nuclear Information System (INIS)

Turkot, F.

1986-06-01

Three experiments that have been approved to run at TeV I are discussed from the viewpoint of their capability to search for evidence of the QCD phase transition in proton-antiproton collisions at 1.6 TeV. One of these experiments, E-735, was proposed as a dedicated search for quark-gluon plasma effects with a detector designed to study large total E/sub T/, low P/sub T/ individual particles. The other two, E-741 (CDF) and E-740 (DO), embody general purpose four-pi detectors designed primarily to study the physics of W and Z bosons and other large P/sub T/ phenomena. The detectors and their quark-gluon plasma signals are compared. 8 refs., 6 figs., 4 tabs

Use of I.G.R.T. for prostate cancers (O.B.I.-C.B.C.T. VarianTM, ExacTrac BrainLABTM and M.V.C.T. Tomo-therapy)

International Nuclear Information System (INIS)

Delpon, G.; Llagostera, C.; Lisbona, A.; Le Blanc, M.; Rio, E.; Supiot, S.; Mahe, M.A.

2009-01-01

Introduction: The aim of this work was to report the experience of image-guided radiotherapy at the C.L.C.C. Nantes-Atlantique using three repositioning imaging devices, the ExacTrac (BrainLABTM), the on-board imager cone beam computed tomography (O.B.I.-C.B.C.T.) (Varian TM ) and the M.V.C.T. (Tomotherapy Inc TM ), in the case of prostate external radiotherapy.Material and methods: For each linac and its imaging device, a treatment plan was described. Moreover, studies concerning calculated shifts after imaging sessions were achieved. Using ExacTrac, for eight patients, a study compared daily shifts based on bony anatomy or on implanted markers. Considering mean values of displacements over a course of radiotherapy, dosimetric impact was evaluated. With the O.B.I.-C.B.C.T., two imaging modalities were used, kV-kV (0. and 270.) and C.B.C.T.. Up to now, whatever the images, displacements were calculated using the bony anatomy. For both modalities and for 26 patients, shifts were compared. Since the beginning of the Tomotherapy HiArt use, mega voltage cone tomography (M.V.C.T.) was performed for each session of each patient. For 12 patients, mean displacements were calculated after five fractions. Then the deviations to those values were calculated. This was done to show the relevance of daily M.V.C.T.. Results and conclusion: This work allows us to report the use of three repositioning imaging devices in the radiotherapy department. At least: they provide an efficient positioning tool. And they let us see the future radiotherapy which would probably be the dose-guided radiotherapy. (N.C.)

Physical modeling and numerical simulation of V-die forging ingot with central void

DEFF Research Database (Denmark)

Christiansen, Peter; Hattel, Jesper Henri; Bay, Niels

2014-01-01

Numerical simulation and physical modeling performed on small-scale ingots made from pure lead, having a hole drilled through their centerline to mimic porosity, are utilized to characterize the deformation mechanics of a single open die forging compression stage and to identify the influence...... of the lower V-die angle on porosity closure and forging load requirements of large cast ingots. Results show that a lower V-die angle of 120 provides the best closure of centerline porosity without demanding the highest forging loads or developing unreasonably asymmetric shapes that may create difficulties...... in multi-stage open die forging procedures....

Heterozygous and homozygous JAK2(V617F states modeled by induced pluripotent stem cells from myeloproliferative neoplasm patients.

Directory of Open Access Journals (Sweden)

Joseph Saliba

Full Text Available JAK2(V617F is the predominant mutation in myeloproliferative neoplasms (MPN. Modeling MPN in a human context might be helpful for the screening of molecules targeting JAK2 and its intracellular signaling. We describe here the derivation of induced pluripotent stem (iPS cell lines from 2 polycythemia vera patients carrying a heterozygous and a homozygous mutated JAK2(V617F, respectively. In the patient with homozygous JAK2(V617F, additional ASXL1 mutation and chromosome 20 allowed partial delineation of the clonal architecture and assignation of the cellular origin of the derived iPS cell lines. The marked difference in the response to erythropoietin (EPO between homozygous and heterozygous cell lines correlated with the constitutive activation level of signaling pathways. Strikingly, heterozygous iPS cells showed thrombopoietin (TPO-independent formation of megakaryocytic colonies, but not EPO-independent erythroid colony formation. JAK2, PI3K and HSP90 inhibitors were able to block spontaneous and EPO-induced growth of erythroid colonies from GPA(+CD41(+ cells derived from iPS cells. Altogether, this study brings the proof of concept that iPS can be used for studying MPN pathogenesis, clonal architecture, and drug efficacy.

Negative resistance in I-V characteristics and 2D vortex dynamics in a-W/Si multilayer superconductors with periodic antidot arrays

Energy Technology Data Exchange (ETDEWEB)

Kurosu, Y.; Yokoyama, M.; Kuwasawa, Y.; Matsuda, S.; Nojima, T

2003-05-01

We have examined the vortex dynamics in W/Si multilayers with the arrays of antidots in the form of square and triangular lattices. In the measurements of I-V characteristics as a function of temperature T and magnetic field H, we find a specific feature that the V(I) curves coincide irrespective of T. Especially the V(I) curves with a negative slope are observed in the multilayer with triangular arrays.

I-deas TMG to NX Space Systems Thermal Model Conversion and Computational Performance Comparison

Science.gov (United States)

Somawardhana, Ruwan

2011-01-01

CAD/CAE packages change on a continuous basis as the power of the tools increase to meet demands. End -users must adapt to new products as they come to market and replace legacy packages. CAE modeling has continued to evolve and is constantly becoming more detailed and complex. Though this comes at the cost of increased computing requirements Parallel processing coupled with appropriate hardware can minimize computation time. Users of Maya Thermal Model Generator (TMG) are faced with transitioning from NX I -deas to NX Space Systems Thermal (SST). It is important to understand what differences there are when changing software packages We are looking for consistency in results.

Investigation of Two Outbreaks of Gastroenteritis in Tržič in September 2011 / Preiskava Dveh Izbruhov Gastroenteritisa V Tržiču V Septembru 2011

Directory of Open Access Journals (Sweden)

Krt Lah Andreja

2015-03-01

Full Text Available Uvod. Izbruh gastroenteritisa neopredeljene etiologije in izbruh salmoneloze sta bila hkrati v Tržiču septembra 2011. Namen preiskave izbruhov je bil odkriti izvor in poti prenosa okužbe s ciljem, da se sprejmejo ukrepi za prekinitev širjenja. Metode. V dveh retrospektivnih študijah primerov in kontrol je bila z univariatnimi in multivariatnimi analizami testirana povezava med gastroenteritisom neopredeljene etiologije oziroma salmonelozo in uživanjem hrane v gostilni ali pitjem vodovodne vode. Primer v prvi študiji je bil oboleli s salmonelozo, primer v drugi študiji pa je bil vsak občan z drisko in/ali bruhanjem. Primere obolelih so prijavili zdravniki; kontrole so bile izbrane med zdravimi osebami, ki so vrnile izpolnjeni vprašalnik. Rezultati. Osebe, izpostavljene hrani v gostilni, so imele 24,8-krat višje obete za obolevanje za salmonelozo kot neizpostavljeni (univariatna analiza RO 24,8; 95 % IZ 7,5-82,3; p < 0,05; multivariatna analiza RO 14,7; 95% IZ 3,5-61,3, p < 0,05. Občani, ki so pili vodo iz določenega vodnega vira, so imeli 3,4-krat višje obete, da so oboleli za gastroenteritisom neopredeljene etiologije kot neizpostavljeni (univariatna analiza RO 3,4; 95 % IZ je 2,2-5,1; p < 0,05; multivariatni analizi RO 2,9; 95 % IZ 1,7-5,3; p < 0,05. Statistično značilna je bila tudi povezava med obolevanjem in količino popite pitne vode. Zaključki. Z analitičnima študijama primerov in kontrol smo potrdili vzročno povezanost med salmonelozo in prehranjevanjem v določeni gostilni ter povezanost med gastroenteritisom neopredeljene etiologije in pitjem vodovodne vode iz določenega vodnega vira. Mogoč je vnos Salmonelle enteritidis v gostilno prek vodovodne vode

Cerebral impact of prenatal irradiation by 131I: an experimental model of clinical neuroradioembryological effects.

Science.gov (United States)

Talko, V V; Loganovsky, K M; Drozd, I P; Tukalenko, Ye V; Loganovska, T K; Nechayev, S Yu; Masiuk, S V; Prokhorova, Ye M

2017-12-01

Human brain in prenatal period is a most vulnerable to ionizing radiation body structure. Unlike atomic bombings or radiological interventions in healthcare leading at most to external irradiation the intensive internal exposure may occur upon nuclear reactor accidents followed by substantial release and fallout of radioactive 131I. The latter can lead to specific neuroradioembryological effects. To create an experimental model of prenatal cerebral radiation effects of 131I in human and to determine the experimental and clinical neuroradioembryological effects.Study object. The neuroradioembryological effects in Vistar rats exposed to 131I in prenatal period. Nervous system status and mental status in 104 persons exposed to ionizing radiation in utero due to the ChNPP accident and the same in 78 not exposed subjects. Experimental i.e. behavioral techniques, including the spontaneous locomotive, exploratory activity and learning ability assessment, clinical i.e. neuropsychiatric, neuro and psychometric, neuropsychological, neurophys iological methods, both with dosimetric and statistical methods were applied. Intrauterine irradiation of Wistar rats by 131I was simulated on a model of one time oral 27.5 kBq radionu clide administration in the mid gestation period (0.72±0.14 Gy fetal thyroid dose), which provides extrapolation of neuroradioembryological effects in rats to that in humans exposed to intrauterine radiation as a result of the Chornobyl catastrophe. Abnormalities in behavioral reactions and decreased output of conditioned reflex reactions identified in the 10 month old rats suggest a deterioration of cerebral cognition in exposed animals. Specific cog nitive deficit featuring a disharmonic intellectual development through the relatively decreased verbal intelligence versus relative increase of nonverbal one is remained in prenatally exposed persons. This can indicate to dysfunc tion of cortical limbic system with especial involvement of a dominant

Coupling a three-dimensional subsurface flow and transport model with a land surface model to simulate stream–aquifer–land interactions (CP v1.0

Directory of Open Access Journals (Sweden)

G. Bisht

2017-12-01

Full Text Available A fully coupled three-dimensional surface and subsurface land model is developed and applied to a site along the Columbia River to simulate three-way interactions among river water, groundwater, and land surface processes. The model features the coupling of the Community Land Model version 4.5 (CLM4.5 and a massively parallel multiphysics reactive transport model (PFLOTRAN. The coupled model, named CP v1.0, is applied to a 400 m × 400 m study domain instrumented with groundwater monitoring wells along the Columbia River shoreline. CP v1.0 simulations are performed at three spatial resolutions (i.e., 2, 10, and 20 m over a 5-year period to evaluate the impact of hydroclimatic conditions and spatial resolution on simulated variables. Results show that the coupled model is capable of simulating groundwater–river-water interactions driven by river stage variability along managed river reaches, which are of global significance as a result of over 30 000 dams constructed worldwide during the past half-century. Our numerical experiments suggest that the land-surface energy partitioning is strongly modulated by groundwater–river-water interactions through expanding the periodically inundated fraction of the riparian zone, and enhancing moisture availability in the vadose zone via capillary rise in response to the river stage change. Meanwhile, CLM4.5 fails to capture the key hydrologic process (i.e., groundwater–river-water exchange at the site, and consequently simulates drastically different water and energy budgets. Furthermore, spatial resolution is found to significantly impact the accuracy of estimated the mass exchange rates at the boundaries of the aquifer, and it becomes critical when surface and subsurface become more tightly coupled with groundwater table within 6 to 7 meters below the surface. Inclusion of lateral subsurface flow influenced both the surface energy budget and subsurface transport processes as a result

Coupling a three-dimensional subsurface flow and transport model with a land surface model to simulate stream-aquifer-land interactions (CP v1.0)

Science.gov (United States)

Bisht, Gautam; Huang, Maoyi; Zhou, Tian; Chen, Xingyuan; Dai, Heng; Hammond, Glenn E.; Riley, William J.; Downs, Janelle L.; Liu, Ying; Zachara, John M.

2017-12-01

A fully coupled three-dimensional surface and subsurface land model is developed and applied to a site along the Columbia River to simulate three-way interactions among river water, groundwater, and land surface processes. The model features the coupling of the Community Land Model version 4.5 (CLM4.5) and a massively parallel multiphysics reactive transport model (PFLOTRAN). The coupled model, named CP v1.0, is applied to a 400 m × 400 m study domain instrumented with groundwater monitoring wells along the Columbia River shoreline. CP v1.0 simulations are performed at three spatial resolutions (i.e., 2, 10, and 20 m) over a 5-year period to evaluate the impact of hydroclimatic conditions and spatial resolution on simulated variables. Results show that the coupled model is capable of simulating groundwater-river-water interactions driven by river stage variability along managed river reaches, which are of global significance as a result of over 30 000 dams constructed worldwide during the past half-century. Our numerical experiments suggest that the land-surface energy partitioning is strongly modulated by groundwater-river-water interactions through expanding the periodically inundated fraction of the riparian zone, and enhancing moisture availability in the vadose zone via capillary rise in response to the river stage change. Meanwhile, CLM4.5 fails to capture the key hydrologic process (i.e., groundwater-river-water exchange) at the site, and consequently simulates drastically different water and energy budgets. Furthermore, spatial resolution is found to significantly impact the accuracy of estimated the mass exchange rates at the boundaries of the aquifer, and it becomes critical when surface and subsurface become more tightly coupled with groundwater table within 6 to 7 meters below the surface. Inclusion of lateral subsurface flow influenced both the surface energy budget and subsurface transport processes as a result of river-water intrusion into the

Life Cycle V and V Process for Hardware Description Language Programs of Programmable Logic Device-based Instrumentation and Control Systems

International Nuclear Information System (INIS)

Cha, K. H.; Lee, D. Y.

2010-01-01

Programmable Logic Device (PLD), especially Complex PLD (CPLD) or Field Programmable Logic Array (FPGA), has been growing in interest in nuclear Instrumentation and Control (I and C) applications. PLD has been applied to replace an obsolete analog device or old-fashioned microprocessor, or to develop digital controller, subsystem or overall system on hardware aspects. This is the main reason why the PLD-based I and C design provides higher flexibility than the analog-based one, and the PLD-based I and C systems shows better real-time performance than the processor-based I and C systems. Due to the development of the PLD-based I and C systems, their nuclear qualification has been issued in the nuclear industry. Verification and Validation (V and V) is one of necessary qualification activities when a Hardware Description Language (HDL) is used to implement functions of the PLD-based I and C systems. The life cycle V and V process, described in this paper, has been defined as satisfying the nuclear V and V requirements, and it has been applied to verify Correctness, Completeness, and Consistency (3C) among design outputs in a safety-grade programmable logic controller and a safety-critical data communication system. Especially, software engineering techniques such as the Fagan Inspection, formal verification, simulated verification and automated testing have been defined for the life cycle V and V tasks of behavioral, structural, and physical design in VHDL

Individualizacija izobraževanja vodi v mentorsko gibanje Znaš, nauči drugega

Directory of Open Access Journals (Sweden)

Ana Krajnc

2012-05-01

Full Text Available Z razvojem vseživljenjskega izobraževanja se učenje vedno bolj individualizira. Obseg skupinskega izobraževanja (tečaji, seminarji se zmanjšuje, individualno, samostojno izobraževanje s podporo mentorja nenehno narašča. Značilnost informacijske družbe ali družbe znanja je, da imajo ljudje od zaznave potrebe po znanju do trenutka, ko bi to morali že obvladati, na razpolago zelo malo časa. Iščejo najbolj racionalno pot učenja, tako da je pri- lagojena njim osebno. Nova družba potrebuje unikatnega človeka, ker s tem povečuje osebno konkurenčnost. Že več desetletij smo priče novim pojavom izobraževanja tudi v Sloveniji. Ljudje se ne zanesejo več samo na poklic, kompetentnost si izgradijo še v drugih izobraževanjih (vzporedni študij, specializacije v drugi stroki, izkušnje, dopolnilno izobraževanje in vse skrbno shranijo v portfelj. Neformalno mentorstvo in učenje v parih smo na Slovenski univerzi za tretje življenjsko obdobje promovirali prek gibanja »Znaš, nauči drugega« od leta 2009 dalje. Neformalni mentorji ponudijo svoje znanje iz računalništva še drugemu. Steče učenje v parih mentor-učenec o elektronski pošti, uporabi skypa, facebooka, interneta, urejanju in pisanju tekstov, digitalni fotografiji itd. Mentor se vživlja in prilagaja učencu. Če učenec želi, da se uči doma na svojem računalniku, ker ga bolje pozna in je napredovanje v znanju tako najhitrejše, imamo patronažno izobraže- vanje. Podjetje ST Slovenija podpira gibanje »Znaš, nauči drugega« in ga širi v podjetja: Each one teach one. Mentorstvo je vedno pogostejša oblika individualnega izobraževanja. Razlike so med formalnim in neformalnim mentorstvom. Prvo daje poudarek pridobivanju znanja, mentor je uradno določen, drugo omogoča tudi osebnostni razvoj: odpravo strahov, večjo samozavest, nove načrte. Učenec in mentor se morata osebnostno ujeti. Neformalnega mentorja si učenec navadno poišče sam. Ni za vsakega u

A Spectral Evaluation of Models Performances in Mediterranean Oak Woodlands

Science.gov (United States)

Vargas, R.; Baldocchi, D. D.; Abramowitz, G.; Carrara, A.; Correia, A.; Kobayashi, H.; Papale, D.; Pearson, D.; Pereira, J.; Piao, S.; Rambal, S.; Sonnentag, O.

2009-12-01

Ecosystem processes are influenced by climatic trends at multiple temporal scales including diel patterns and other mid-term climatic modes, such as interannual and seasonal variability. Because interactions between biophysical components of ecosystem processes are complex, it is important to test how models perform in frequency (e.g. hours, days, weeks, months, years) and time (i.e. day of the year) domains in addition to traditional tests of annual or monthly sums. Here we present a spectral evaluation using wavelet time series analysis of model performance in seven Mediterranean Oak Woodlands that encompass three deciduous and four evergreen sites. We tested the performance of five models (CABLE, ORCHIDEE, BEPS, Biome-BGC, and JULES) on measured variables of gross primary production (GPP) and evapotranspiration (ET). In general, model performance fails at intermediate periods (e.g. weeks to months) likely because these models do not represent the water pulse dynamics that influence GPP and ET at these Mediterranean systems. To improve the performance of a model it is critical to identify first where and when the model fails. Only by identifying where a model fails we can improve the model performance and use them as prognostic tools and to generate further hypotheses that can be tested by new experiments and measurements.

V and V-based remaining fault estimation model for safety–critical software of a nuclear power plant

International Nuclear Information System (INIS)

Eom, Heung-seop; Park, Gee-yong; Jang, Seung-cheol; Son, Han Seong; Kang, Hyun Gook

2013-01-01

Highlights: ► A software fault estimation model based on Bayesian Nets and V and V. ► Use of quantified data derived from qualitative V and V results. ► Faults insertion and elimination process was modeled in the context of probability. ► Systematically estimates the expected number of remaining faults. -- Abstract: Quantitative software reliability measurement approaches have some limitations in demonstrating the proper level of reliability in cases of safety–critical software. One of the more promising alternatives is the use of software development quality information. Particularly in the nuclear industry, regulatory bodies in most countries use both probabilistic and deterministic measures for ensuring the reliability of safety-grade digital computers in NPPs. The point of deterministic criteria is to assess the whole development process and its related activities during the software development life cycle for the acceptance of safety–critical software. In addition software Verification and Validation (V and V) play an important role in this process. In this light, we propose a V and V-based fault estimation method using Bayesian Nets to estimate the remaining faults for safety–critical software after the software development life cycle is completed. By modeling the fault insertion and elimination processes during the whole development phases, the proposed method systematically estimates the expected number of remaining faults.

Model unspecific search in CMS. Results at 8 TeV

Energy Technology Data Exchange (ETDEWEB)

Albert, Andreas; Duchardt, Deborah; Hebbeker, Thomas; Knutzen, Simon; Lieb, Jonas; Meyer, Arnd; Pook, Tobias; Roemer, Jonas [III. Physikalisches Institut A, RWTH Aachen University (Germany)

2016-07-01

In the year 2012, CMS collected a total data set of approximately 20 fb{sup -1} in proton-proton collisions at √(s)=8 TeV. Dedicated searches for physics beyond the standard model are commonly designed with the signatures of a given theoretical model in mind. While this approach allows for an optimised sensitivity to the sought-after signal, it may cause unexpected phenomena to be overlooked. In a complementary approach, the Model Unspecific Search in CMS (MUSiC) analyses CMS data in a general way. Depending on the reconstructed final state objects (e.g. electrons), collision events are sorted into classes. In each of the classes, the distributions of selected kinematic variables are compared to standard model simulation. An automated statistical analysis is performed to quantify the agreement between data and prediction. In this talk, the analysis concept is introduced and selected results of the analysis of the 2012 CMS data set are presented.

The use and misuse of V(c,max) in Earth System Models.

Science.gov (United States)

Rogers, Alistair

2014-02-01

Earth System Models (ESMs) aim to project global change. Central to this aim is the need to accurately model global carbon fluxes. Photosynthetic carbon dioxide assimilation by the terrestrial biosphere is the largest of these fluxes, and in many ESMs is represented by the Farquhar, von Caemmerer and Berry (FvCB) model of photosynthesis. The maximum rate of carboxylation by the enzyme Rubisco, commonly termed V c,max, is a key parameter in the FvCB model. This study investigated the derivation of the values of V c,max used to represent different plant functional types (PFTs) in ESMs. Four methods for estimating V c,max were identified; (1) an empirical or (2) mechanistic relationship was used to relate V c,max to leaf N content, (3) V c,max was estimated using an approach based on the optimization of photosynthesis and respiration or (4) calibration of a user-defined V c,max to obtain a target model output. Despite representing the same PFTs, the land model components of ESMs were parameterized with a wide range of values for V c,max (-46 to +77% of the PFT mean). In many cases, parameterization was based on limited data sets and poorly defined coefficients that were used to adjust model parameters and set PFT-specific values for V c,max. Examination of the models that linked leaf N mechanistically to V c,max identified potential changes to fixed parameters that collectively would decrease V c,max by 31% in C3 plants and 11% in C4 plants. Plant trait data bases are now available that offer an excellent opportunity for models to update PFT-specific parameters used to estimate V c,max. However, data for parameterizing some PFTs, particularly those in the Tropics and the Arctic are either highly variable or largely absent.

http://dx.doi.org/10.4314/og.v13i 1.15

African Journals Online (AJOL)

Dean SPGS NAU

http://dx.doi.org/10.4314/og.v13i 1.15. Abstract. In Nigeria, there are three main religions recognised by the people;. Christianity, Islam and the Indigenous religion. These religions have differences that have brought about unrest as the tolerance level has got to a point of polarity. The various unrests have led to national.

Solvothermal synthesis of V2O5/graphene nanocomposites for high performance lithium ion batteries

International Nuclear Information System (INIS)

Chen, Da; Yi, Ran; Chen, Shuru; Xu, Terrence; Gordin, Mikhail L.; Lv, Dongping; Wang, Donghai

2014-01-01

Highlights: • A homogeneous V 2 O 5 /graphene nanocomposite is successfully synthesized. • V 2 O 5 nanoparticles are highly encapsulated in the 2D graphene matrix. • V 2 O 5 /graphene nanocomposite shows much better performance than bare V 2 O 5 . - Abstract: In this work, V 2 O 5 /graphene nanocomposites have been synthesized by a facile solvothermal approach. The V 2 O 5 nanoparticles, around 20–40 nm in size, were encapsulated in the 2D graphene matrix. The reversible Li-cycling properties of V 2 O 5 /graphene have been evaluated by galvanostatic discharge–charge cycling, cyclic voltammetry, and impedance spectroscopy. Compared with the bare V 2 O 5 nanoparticles, the V 2 O 5 /graphene nanocomposites exhibited enhanced electrochemical performance with higher reversible capacity and improved cycling stability and rate capability. The graphene nanosheets act not only as an electronically conductive matrix to improve the electronic and ionic conductivity of the composite electrode, but also as a flexible buffer matrix to maintain the structural integrity of the composite electrodes by preventing particle agglomeration, thus leading to the improvement of the electrochemical performance of V 2 O 5

Preserved regional cerebral blood flow in the occipital cortices, brainstem, and cerebellum of patients with V180I-129M genetic Creutzfeldt-Jakob disease in serial SPECT studies.

Science.gov (United States)

Hayashi, Yuichi; Yoshikura, Nobuaki; Takekoshi, Akira; Yamada, Megumi; Asano, Takahiko; Kimura, Akio; Satoh, Katsuya; Kitamoto, Tetsuyuki; Inuzuka, Takashi

2016-11-15

Creutzfeldt-Jakob disease (CJD) with a causative point mutation of valine to isoleucine at codon 180 (V180I) is one of the major types of genetic CJD (gCJD) in Japan. V180I gCJD is rarely accompanied by a family history, and its clinical characteristics include late-onset, long disease duration, and edematous cortical hyperintensity in diffusion, fluid attenuate inversion and T2-weighted MRI. We performed serial imaging with single-photon emission computed tomography (SPECT) and MRI in three V180I gCJD cases over long-term observation. All cases were characterized by progressive dementia, parkinsonism, and the absence of cerebellar signs or cortical visual dysfunction in their clinical courses. Moreover, during the end-stage, SPECT findings showed preserved regional cerebral blood flow (rCBF) in the occipital cortices, brainstem, and cerebellum. Similarly, no apparent atrophy or increased signal intensities were observed in MRI images of the occipital and cerebellar regions. In conclusion, we report a decrease in rCBF predominantly in the frontal and temporal cortices during the early-stage, which became more widespread as the disease progressed. Importantly, rCBF was preserved in the occipital cortices, brainstem, and cerebellar regions until the end-stage, which may be distinct to V180I gCJD cases. Copyright © 2016 Elsevier B.V. All rights reserved.

Betyder modellering det samme i naturfag som i matematik?

DEFF Research Database (Denmark)

Ejersbo, Lisser Rye

2014-01-01

Med de nye målformuleringer og læseplaner bruges udtrykket modellering nu både indenfor naturfag og matematik. Matematiklærere, som er vant til at arbejde med modellering tror måske, at det betyder det samme begge steder, men det behøver slet ikke at være tilfældet. Måske vi trænger til en...

'TeV Gamma-ray Crisis' and an Anisotropic Space Model

OpenAIRE

Cho, Gi-Chol; Kamoshita, Jun-ichi; Matsunaga, Mariko; Sugamoto, Akio; Watanabe, Isamu

2004-01-01

To solve the `TeV gamma crisis', we examine a model whose one spatial direction is discretized at a high energy scale. Assuming the standard extra-galactic IR photon distribution, we evaluate the mean free-path of a energetic photon which acquires an effective mass in the model. For a wide range of the value of the lattice energy scale between a few TeV and around $10^{10}$ GeV, the mean free-path of a TeV energy photon can be enlarged enough to solve the `crisis'. Taking into account the eff...

Quantitative analysis of charge trapping and classification of sub-gap states in MoS2 TFT by pulse I-V method

Science.gov (United States)

Park, Junghak; Hur, Ji-Hyun; Jeon, Sanghun

2018-04-01

The threshold voltage instabilities and huge hysteresis of MoS2 thin film transistors (TFTs) have raised concerns about their practical applicability in next-generation switching devices. These behaviors are associated with charge trapping, which stems from tunneling to the adjacent trap site, interfacial redox reaction and interface and/or bulk trap states. In this report, we present quantitative analysis on the electron charge trapping mechanism of MoS2 TFT by fast pulse I-V method and the space charge limited current (SCLC) measurement. By adopting the fast pulse I-V method, we were able to obtain effective mobility. In addition, the origin of the trap states was identified by disassembling the sub-gap states into interface trap and bulk trap states by simple extraction analysis. These measurement methods and analyses enable not only quantitative extraction of various traps but also an understanding of the charge transport mechanism in MoS2 TFTs. The fast I-V data and SCLC data obtained under various measurement temperatures and ambient show that electron transport to neighboring trap sites by tunneling is the main charge trapping mechanism in thin-MoS2 TFTs. This implies that interfacial traps account for most of the total sub-gap states while the bulk trap contribution is negligible, at approximately 0.40% and 0.26% in air and vacuum ambient, respectively. Thus, control of the interface trap states is crucial to further improve the performance of devices with thin channels.

A theoretical study of CsI:Tl columnar scintillator image quality parameters by analytical modeling

Energy Technology Data Exchange (ETDEWEB)

Kalyvas, N., E-mail: nkalyvas@teiath.gr; Valais, I.; Michail, C.; Fountos, G.; Kandarakis, I.; Cavouras, D.

2015-04-11

Medical X-ray digital imaging systems such as mammography, radiography and computed tomography (CT), are composed from efficient radiation detectors, which can transform the X-rays to electron signal. Scintillators are materials that emit light when excited by X-rays and incorporated in X-ray medical imaging detectors. Columnar scintillator, like CsI:T1 is very often used for X-ray detection due to its higher performance. The columnar form limits the lateral spread of the optical photons to the scintillator output, thus it demonstrates superior spatial resolution compared to granular scintillators. The aim of this work is to provide an analytical model for calculating the MTF, the DQE and the emission efficiency of a columnar scintillator. The model parameters were validated against published Monte Carlo data. The model was able to predict the overall performance of CsI:Tl scintillators and suggested an optimum thickness of 300 μm for radiography applications. - Highlights: • An analytical model for calculating MTF, DQE and Detector Optical Gain (DOG) of columnar phosphors was developed. • The model was fitted to published efficiency and MTF Monte Carlo data. • A good fit was observed for 300 µm columnar CsI:Tl thickness. • The performance of the 300 µm column thickness CsI:Tl was better in terms of MTF and DOG for radiographic applications.

A comparison of radiological risk assessment models: Risk assessment models used by the BEIR V Committee, UNSCEAR, ICRP, and EPA (for NESHAP)

International Nuclear Information System (INIS)

Wahl, L.E.

1994-03-01

Radiological risk assessments and resulting risk estimates have been developed by numerous national and international organizations, including the National Research Council's fifth Committee on the Biological Effects of Ionizing Radiations (BEIR V), the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR), and the International Commission on Radiological Protection (ICRP). A fourth organization, the Environmental Protection Agency (EPA), has also performed a risk assessment as a basis for the National Emission Standards for Hazardous Air Pollutants (NESHAP). This paper compares the EPA's model of risk assessment with the models used by the BEIR V Committee, UNSCEAR, and ICRP. Comparison is made of the values chosen by each organization for several model parameters: populations used in studies and population transfer coefficients, dose-response curves and dose-rate effects, risk projection methods, and risk estimates. This comparison suggests that the EPA has based its risk assessment on outdated information and that the organization should consider adopting the method used by the BEIR V Committee, UNSCEAR, or ICRP

Improvements in DC Current-Ioltage (I-V) Characteristics of n-GaN Schottky Diode using Metal Overlap Edge Termination

International Nuclear Information System (INIS)

Munir, T.; Aziz, A. A.; Abdullah, M. J.; Ain, M. F.

2010-01-01

Practical design of GaN Schottky diodes incorporating a field plate necessitates an understanding of how the addition of such plate affects the diode performance. In this paper, we investigated the effects on DC current-voltage (I-V) characteristics of n-GaN schottky diode by incorporating metal overlap edge termination. The thickness of the oxide film varies from 0.001 to 1 micron. Two-dimensional Atlas/Blaze simulations revealed that severe electric field crowding across the metal semiconductor contact will cause reliability concern and limit device breakdown voltage. DC current-voltage (I-V) measurements indicate that the forward currents are higher for thinner oxide film schottky diodes with metal overlap edge termination than those of unterminated schottky diodes. The forward current increased due to formation of an accumulation layer underneath the oxide layer. Extending the field plate to beyond periphery regions of schottky contact does not result in any significant increase in forward current. The new techniques of ramp oxide metal overlap edge termination have been implemented to increase the forward current of n-GaN schottky diode. In reverse bias, breakdown voltage increased with edge termination oxide up to a certain limit of oxide thickness.

A new spectroscopic imager for X-rays from 0.5 keV to 150 keV combining a pnCCD and a columnar CsI(Tl) scintillator

Science.gov (United States)

Schlosser, D. M.; Hartmann, R.; Kalok, D.; Bechteler, A.; Abboud, A.; Shokr, M.; Çonka, T.; Pietsch, U.; Strüder, L.

2017-04-01

By combining a low noise fully depleted pnCCD detector with a columnar CsI(Tl) scintillator an energy dispersive spatial resolving detector can be realized with a high quantum efficiency in the range from below 0.5 keV to above 150 keV. The used scintillator system increases the pulse height of gamma-rays converted in the CsI(Tl), due to focusing properties of the columnar scintillator structure by reducing the event size in indirect detection mode (conversion in the scintillator). In case of direct detection (conversion in the silicon of the pnCCD) the relative energy resolution is 0.7% at 122 keV (FWHM = 850 eV) and the spatial resolution is less than 75 μm. In case of indirect detection the relative energy resolution, integrated over all event sizes is about 9% at 122 keV with an expected spatial precision of below 75 μm.

Correlation of mitochondrial protein expression in complexes I to V with natural and induced forms of canine idiopathic dilated cardiomyopathy.

Science.gov (United States)

Lopes, Rosana; Solter, Philip F; Sisson, D David; Oyama, Mark A; Prosek, Robert

2006-06-01

To identify qualitative and quantitative differences in cardiac mitochondrial protein expression in complexes I to V between healthy dogs and dogs with natural or induced dilated cardiomyopathy (DCM). Left ventricle samples were obtained from 7 healthy dogs, 7 Doberman Pinschers with naturally occurring DCM, and 7 dogs with DCM induced by rapid right ventricular pacing. Fresh and frozen mitochondrial fractions were isolated from the left ventricular free wall and analyzed by 2-dimensional electrophoresis. Protein spots that increased or decreased in density by 2-fold or greater between groups were analyzed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry or quadrupole selecting, quadrupole collision cell, time-of-flight mass spectrometry. A total of 22 altered mitochondrial proteins were identified in complexes I to V. Ten and 12 were found in complex I and complexes II to V, respectively. Five were mitochondrial encoded, and 17 were nuclear encoded. Most altered mitochondrial proteins in tissue specimens from dogs with naturally occurring DCM were associated with complexes I and V, whereas in tissue specimens from dogs subjected to rapid ventricular pacing, complexes I and IV were more affected. In the experimentally induced form of DCM, only nuclear-encoded subunits were changed in complex I. In both disease groups, the 22-kd subunit was downregulated. Natural and induced forms of DCM resulted in altered mitochondrial protein expression in complexes I to V. However, subcellular differences between the experimental and naturally occurring forms of DCM may exist.

Conceptual adsorption models and open issues pertaining to performance assessment

International Nuclear Information System (INIS)

Serne, R.J.

1991-10-01

Recently several articles have been published that question the appropriateness of the distribution coefficient, Rd, concept to quantify radionuclide migration. Several distinct issues are raised by various critics. In this paper I provide some perspective on issues surrounding the modeling of nuclide retardation. The first section defines adsorption terminology and discusses various adsorption processes. The next section describes five commonly used adsorption conceptual models, specifically emphasizing what attributes that affect adsorption are explicitly accommodated in each model. I also review efforts to incorporate each adsorption model into performance assessment transport computer codes. The five adsorption conceptual models are (1) the constant Rd model, (2) the parametric Rd model, (3) isotherm adsorption models, (4) mass-action adsorption models, and (5) surface-complexation with electrostatics models. The final section discusses the adequacy of the distribution ratio concept, the adequacy of transport calculations that rely on constant retardation factors and the status of incorporating sophisticated adsorption models into transport codes

Machine learning-based analysis of MR radiomics can help to improve the diagnostic performance of PI-RADS v2 in clinically relevant prostate cancer

Energy Technology Data Exchange (ETDEWEB)

Wang, Jing [CFDA, Center for Medical Device Evaluation, Beijing (China); Wu, Chen-Jiang; Zhang, Jing; Wang, Xiao-Ning; Zhang, Yu-Dong [First Affiliated Hospital with Nanjing Medical University, Department of Radiology, Nanjing, Jiangsu Province (China); Bao, Mei-Ling [First Affiliated Hospital with Nanjing Medical University, Department of Pathology, Nanjing (China)

2017-10-15

To investigate whether machine learning-based analysis of MR radiomics can help improve the performance PI-RADS v2 in clinically relevant prostate cancer (PCa). This IRB-approved study included 54 patients with PCa undergoing multi-parametric (mp) MRI before prostatectomy. Imaging analysis was performed on 54 tumours, 47 normal peripheral (PZ) and 48 normal transitional (TZ) zone based on histological-radiological correlation. Mp-MRI was scored via PI-RADS, and quantified by measuring radiomic features. Predictive model was developed using a novel support vector machine trained with: (i) radiomics, (ii) PI-RADS scores, (iii) radiomics and PI-RADS scores. Paired comparison was made via ROC analysis. For PCa versus normal TZ, the model trained with radiomics had a significantly higher area under the ROC curve (Az) (0.955 [95% CI 0.923-0.976]) than PI-RADS (Az: 0.878 [0.834-0.914], p < 0.001). The Az between them was insignificant for PCa versus PZ (0.972 [0.945-0.988] vs. 0.940 [0.905-0.965], p = 0.097). When radiomics was added, performance of PI-RADS was significantly improved for PCa versus PZ (Az: 0.983 [0.960-0.995]) and PCa versus TZ (Az: 0.968 [0.940-0.985]). Machine learning analysis of MR radiomics can help improve the performance of PI-RADS in clinically relevant PCa. (orig.)

Machine learning-based analysis of MR radiomics can help to improve the diagnostic performance of PI-RADS v2 in clinically relevant prostate cancer

International Nuclear Information System (INIS)

Wang, Jing; Wu, Chen-Jiang; Zhang, Jing; Wang, Xiao-Ning; Zhang, Yu-Dong; Bao, Mei-Ling

2017-01-01

To investigate whether machine learning-based analysis of MR radiomics can help improve the performance PI-RADS v2 in clinically relevant prostate cancer (PCa). This IRB-approved study included 54 patients with PCa undergoing multi-parametric (mp) MRI before prostatectomy. Imaging analysis was performed on 54 tumours, 47 normal peripheral (PZ) and 48 normal transitional (TZ) zone based on histological-radiological correlation. Mp-MRI was scored via PI-RADS, and quantified by measuring radiomic features. Predictive model was developed using a novel support vector machine trained with: (i) radiomics, (ii) PI-RADS scores, (iii) radiomics and PI-RADS scores. Paired comparison was made via ROC analysis. For PCa versus normal TZ, the model trained with radiomics had a significantly higher area under the ROC curve (Az) (0.955 [95% CI 0.923-0.976]) than PI-RADS (Az: 0.878 [0.834-0.914], p < 0.001). The Az between them was insignificant for PCa versus PZ (0.972 [0.945-0.988] vs. 0.940 [0.905-0.965], p = 0.097). When radiomics was added, performance of PI-RADS was significantly improved for PCa versus PZ (Az: 0.983 [0.960-0.995]) and PCa versus TZ (Az: 0.968 [0.940-0.985]). Machine learning analysis of MR radiomics can help improve the performance of PI-RADS in clinically relevant PCa. (orig.)

Modeling and simulation of the shading effect on the performance of a photovoltaic module in the presence of the bypass diode.

Directory of Open Access Journals (Sweden)

Zebiri Mohamed

2018-01-01

Full Text Available In photovoltaic renewable energy production systems where production is dependent on weather conditions, maintaining production at a suitable level is more than essential. The shading effect in photovoltaic panels affects the production of electrical energy by reducing it or even causing the destruction of some or all of the panels. To circumvent this problem, among the solutions proposed in the literature we find the use of by-pass diode and anti-return diode to minimize these consequences.In this paper we present a simulation under Matlab-Simulink of the shading effect and we compare the current voltages characteristics (I-V and power voltage (P-V of a photovoltaic system for different irradiations in the presence and absence of diode by -pass. For modeling, we will use the diode model and the Lambert W-function to solve the implicit equation of the output current. This method allows you to analyze the performance of a panel at different shading levels.

Modeling and simulation of the shading effect on the performance of a photovoltaic module in the presence of the bypass diode.

Science.gov (United States)

Zebiri, Mohamed; Mediouni, Mohamed; Idadoub, Hicham

2018-05-01

In photovoltaic renewable energy production systems where production is dependent on weather conditions, maintaining production at a suitable level is more than essential. The shading effect in photovoltaic panels affects the production of electrical energy by reducing it or even causing the destruction of some or all of the panels. To circumvent this problem, among the solutions proposed in the literature we find the use of by-pass diode and anti-return diode to minimize these consequences.In this paper we present a simulation under Matlab-Simulink of the shading effect and we compare the current voltages characteristics (I-V) and power voltage (P-V) of a photovoltaic system for different irradiations in the presence and absence of diode by -pass. For modeling, we will use the diode model and the Lambert W-function to solve the implicit equation of the output current. This method allows you to analyze the performance of a panel at different shading levels.

THE PERFORMANCE OF SOYBEAN (c.v. Americana ESTABLISHED BY ZERO TILLAGE TECHNIQUE IN IMPERATA FIELD CONTROLLED BY HERBICIDES

Directory of Open Access Journals (Sweden)

S. TJITROSEMITO

1989-01-01

Full Text Available A field experiment was conducted to investigate the performance of soybean (c.v. Americana when established with zero tillage technique on Imperata dominated area. Four different techniques of alang-alang control i.e. imazapyr (20 kg ai/ha, glyphosate (25 kg ai/ha, glufosinate (3.0 kg ai/ha and manual cultivation were arranged factorially with time of plantings i.e. 1,2 and 3 months after treatments. The alang-alang damages varied with herbicides and times, imazapyr (20 kg ai/ha showed slow appearance of damage at 3 months after application it was only 69%, while that of glufosinate was already down to 48% due to regrowth. No phytotoxicity was recorded, but the yield was low.

Ferrate(VI) and ferrate(V) oxidation of cyanide, thiocyanate, and copper(I) cyanide

International Nuclear Information System (INIS)

Sharma, Virender K.; Yngard, Ria A.; Cabelli, Diane E.; Clayton Baum, J.

2008-01-01

Cyanide (CN - ), thiocyanate (SCN - ), and copper(I) cyanide (Cu(CN) 4 3- ) are common constituents in the wastes of many industrial processes such as metal finishing and gold mining, and their treatment is required before the safe discharge of effluent. The oxidation of CN - , SCN - , and Cu(CN) 4 3- by ferrate(VI) (Fe VI O 4 2- ; Fe(VI)) and ferrate(V) (Fe V O 4 3- ; Fe(V)) has been studied using stopped-flow and premix pulse radiolysis techniques. The rate laws for the oxidation of cyanides were found to be first-order with respect to each reactant. The second-order rate constants decreased with increasing pH because the deprotonated species, FeO 4 2- , is less reactive than the protonated Fe(VI) species, HFeO 4 - . Cyanides react 10 3 -10 5 times faster with Fe(V) than with Fe(VI). The Fe(V) reaction with CN - proceeds by sequential one-electron reductions from Fe(V) to Fe(IV) to Fe(III). However, a two-electron transfer process from Fe(V) to Fe(III) occurs in the reaction of Fe(V) with SCN - and Cu(CN) 4 3- . The toxic CN - species of cyanide wastes is converted into relatively non-toxic cyanate (NCO - ). Results indicate that Fe(VI) is highly efficient in removing cyanides from electroplating rinse water and gold mill effluent

Precision Crystal Calorimetry at High Energy and High Luminosity CMS ECAL Performance at 13 TeV and Upgrade Test Beam studies

CERN Document Server

Micheli, Francesco

2016-01-01

The electromagnetic calorimeter (ECAL) of the Compact Muon Solenoid Experiment (CMS) is operating at the Large Hadron Collider (LHC) in 2016 with proton-proton collisions at 13 TeV center-of-mass energy and at a bunch spacing of 25 ns. The instantaneous luminosity during this LHC Run II is expected to exceed 10^34 cm-2s-1 in routine operation. In this talk we present detailed performance results from the 2016 data taking period. At the higher center of mass energy and with the rapidly growing data set the performance at higher electron and photon energies becomes crucial. The CMS ECAL design ensures that its superb performance extends over a very wide range of energies up to electron and photon energies of 1 TeV and beyond. This is of crucial importance for physics searches beyond the standard model. We discuss how the triggering, event reconstruction and calibration of the ECAL detector is performing in this new regime. The impact of the ECAL performance on resonance searches in the mass range up to 1 TeV wi...

PASTIS: Bayesian extrasolar planet validation - I. General framework, models, and performance

Science.gov (United States)

Díaz, R. F.; Almenara, J. M.; Santerne, A.; Moutou, C.; Lethuillier, A.; Deleuil, M.

2014-06-01

A large fraction of the smallest transiting planet candidates discovered by the Kepler and CoRoT space missions cannot be confirmed by a dynamical measurement of the mass using currently available observing facilities. To establish their planetary nature, the concept of planet validation has been advanced. This technique compares the probability of the planetary hypothesis against that of all reasonably conceivable alternative false positive (FP) hypotheses. The candidate is considered as validated if the posterior probability of the planetary hypothesis is sufficiently larger than the sum of the probabilities of all FP scenarios. In this paper, we present PASTIS, the Planet Analysis and Small Transit Investigation Software, a tool designed to perform a rigorous model comparison of the hypotheses involved in the problem of planet validation, and to fully exploit the information available in the candidate light curves. PASTIS self-consistently models the transit light curves and follow-up observations. Its object-oriented structure offers a large flexibility for defining the scenarios to be compared. The performance is explored using artificial transit light curves of planets and FPs with a realistic error distribution obtained from a Kepler light curve. We find that data support the correct hypothesis strongly only when the signal is high enough (transit signal-to-noise ratio above 50 for the planet case) and remain inconclusive otherwise. PLAnetary Transits and Oscillations of stars (PLATO) shall provide transits with high enough signal-to-noise ratio, but to establish the true nature of the vast majority of Kepler and CoRoT transit candidates additional data or strong reliance on hypotheses priors is needed.

Thermodynamic Modeling of a Solid Oxide Fuel Cell to Couple with an Existing Gas Turbine Engine Model

Science.gov (United States)

Brinson, Thomas E.; Kopasakis, George

2004-01-01

The Controls and Dynamics Technology Branch at NASA Glenn Research Center are interested in combining a solid oxide fuel cell (SOFC) to operate in conjunction with a gas turbine engine. A detailed engine model currently exists in the Matlab/Simulink environment. The idea is to incorporate a SOFC model within the turbine engine simulation and observe the hybrid system's performance. The fuel cell will be heated to its appropriate operating condition by the engine s combustor. Once the fuel cell is operating at its steady-state temperature, the gas burner will back down slowly until the engine is fully operating on the hot gases exhausted from the SOFC. The SOFC code is based on a steady-state model developed by The U.S. Department of Energy (DOE). In its current form, the DOE SOFC model exists in Microsoft Excel and uses Visual Basics to create an I-V (current-voltage) profile. For the project's application, the main issue with this model is that the gas path flow and fuel flow temperatures are used as input parameters instead of outputs. The objective is to create a SOFC model based on the DOE model that inputs the fuel cells flow rates and outputs temperature of the flow streams; therefore, creating a temperature profile as a function of fuel flow rate. This will be done by applying the First Law of Thermodynamics for a flow system to the fuel cell. Validation of this model will be done in two procedures. First, for a given flow rate the exit stream temperature will be calculated and compared to DOE SOFC temperature as a point comparison. Next, an I-V curve and temperature curve will be generated where the I-V curve will be compared with the DOE SOFC I-V curve. Matching I-V curves will suggest validation of the temperature curve because voltage is a function of temperature. Once the temperature profile is created and validated, the model will then be placed into the turbine engine simulation for system analysis.

A model to describe the performance of the UASB reactor.

Science.gov (United States)

Rodríguez-Gómez, Raúl; Renman, Gunno; Moreno, Luis; Liu, Longcheng

2014-04-01

A dynamic model to describe the performance of the Upflow Anaerobic Sludge Blanket (UASB) reactor was developed. It includes dispersion, advection, and reaction terms, as well as the resistances through which the substrate passes before its biotransformation. The UASB reactor is viewed as several continuous stirred tank reactors connected in series. The good agreement between experimental and simulated results shows that the model is able to predict the performance of the UASB reactor (i.e. substrate concentration, biomass concentration, granule size, and height of the sludge bed).

Castor-V/21 PWR spent fuel storage cask performance test

International Nuclear Information System (INIS)

Creer, J.M.; Schoonen, D.H.

1986-01-01

Performance testing of a CASTOR-V/21 PWR spent fuel storage cask manufactured by Gesellschaft fur Nuklear Service (GNS) was performed as part of a cooperative program between Virginia Power and the US Department of Energy. The performance test consisted of obtaining cask handling experience and heat transfer, shielding, and limited fuel integrity data. Five heat transfer test runs were performed with 21 Surry reactor spent fuel assemblies generating approximately 28 kW. Test runs were performed vacuum, nitrogen, and helium backfill environments with the cask in both vertical and horizontal orientations. Cask exterior surface gamma and neutron dose rates were measured with the cask fully loaded. Gas samples were obtained at the beginning and end of each run with nitrogen or helium environments to verify fuel integrity. The heat transfer performance of the CASTOR-V/21 cask was exceptionally good. Peak clad temperatures with helium and nitrogen environments with the cask in a vertical orientation and with helium with the cask in a horizontal orientation were less than 380 0 C. Vertical vacuum and horizontal nitrogen test runs resulted in peak clad temperatures over 380 0 , but the temperatures were not excessively high ( 0 C). The shielding performance of the cask met the design goal of less than 200 mrem/hr. Cask surface dose rates of <75 mrem/hr can easily be established with minor gamma shielding design refinements if desired. Gas samples obtained during testing indicated no leaking fuel rods were present in the cask. It was concluded that the cask performed satisfactorily from heat transfer and shielding perspectives

CASTOR-V/21 PWR spent fuel storage cask performance test

International Nuclear Information System (INIS)

Creer, J.M.; Schoonen, D.H.

1986-01-01

Performance testing of a CASTOR-V/21 PWR spent fuel storage cask manufactured by Gesellschaft fur Nuklear Service (GNS) was performed as part of a cooperative program between Virginia Power and the US Department of Energy. The performance test consisted of obtaining cask handling experience and heat transfer, shielding, and limited fuel integrity data. Five heat transfer test runs were performed with 21 Surry reactor spent fuel assemblies generating approximately 28 kW. Test runs were performed with vacuum, nitrogen, and helium backfills in both vertical and horizontal orientations. Cask exterior surface gamma and neutron dose rates were measured with the cask fully loaded. Gas samples were obtained at the beginning and end of each run with nitrogen or helium backfills to verify fuel integrity. The heat transfer performance of the CASTOR-V/21 cask was exceptionally good. Peak clad temperatures with helium and nitrogen backfills in a vertical orientation and with helium in a horizontal orientation were less than 380 0 C. Vertical vacuum and horizontal nitrogen runs resulted in peak clad temperatures over 380 0 , but the temperatures were not excessively high ( 0 C). The shielding performance of the cask met the design expectation of less than 200 mrem/h. Cask surface dose rates of <75 mrem/h can easily be established with minor gamma shielding design refinements if desired. Gas samples obtained during testing indicated no leaking fuel rods were present in the cask. It was concluded that the cask performed satisfactorily from heat transfer and shielding perspectives

An empirical study of DSRC V2V performance in truck platooning scenarios

Directory of Open Access Journals (Sweden)

Song Gao

2016-11-01

Full Text Available Among many safety applications enabled by Dedicated Short Range Communication (DSRC, truck platooning provides many incentives to commercial companies. This paper studies DSRC Vehicle-to-Vehicle (V2V performance in truck platooning scenarios through real-world experiments. Commercial DSRC equipments and semi-trailer trucks are used in this study. We mount one DSRC antenna on each side of the truck. One set of dynamic tests and a few sets of static tests are conducted to explore DSRC behaviors under different situations. From the test results, we verified some of our speculations. For example, hilly roads can affect delivery ratio and antennas mounted on opposite sides of a truck can suffer from low delivery ratio at curved roads. In addition, we also found that antennas can sometimes suffer from low delivery ratio even when the trucks are on straight roads, possibly due to reflections from the nearby terrain. Fortunately, the delivery ratio can be greatly improved by using the two side antennas alternately.

Astrophysical s-factor measurements for 120Te(p,γ)121I and 120Te(p,n)120I reactions

International Nuclear Information System (INIS)

Gueray, R. T.; Oezkan, N.; Yalcin, C.; Goerres, J.; DeBoer, R.; Palumbo, A.; Tan, W. P.; Wiescher, M.; Fueloep, Zs.; Somorjai, E.; Lee, H. Y.

2009-01-01

Astrophysical S-factors for the 1 20Te(p,γ) 1 21I and 1 20Te(p,n) 1 20I reactions have been measured in the effective center-of-mass energies between 2.47 MeV and 7.93 MeV. Experimental data have been compared with the Hauser-Fesbach statistical model calculations obtained with the model codes NON-SMOKER and TALYS. The discrepancies between the experimental results and calculations can mainly be attributed to the optical model potentials used in the codes.

Generalized Characterization Methodology for Performance Modelling of Lithium-Ion Batteries

DEFF Research Database (Denmark)

Stroe, Daniel Loan; Swierczynski, Maciej Jozef; Stroe, Ana-Irina

2016-01-01

Lithium-ion (Li-ion) batteries are complex energy storage devices with their performance behavior highly dependent on the operating conditions (i.e., temperature, load current, and state-of-charge (SOC)). Thus, in order to evaluate their techno-economic viability for a certain application, detailed...... information about Li-ion battery performance behavior becomes necessary. This paper proposes a comprehensive seven-step methodology for laboratory characterization of Li-ion batteries, in which the battery’s performance parameters (i.e., capacity, open-circuit voltage (OCV), and impedance) are determined...... and their dependence on the operating conditions are obtained. Furthermore, this paper proposes a novel hybrid procedure for parameterizing the batteries’ equivalent electrical circuit (EEC), which is used to emulate the batteries’ dynamic behavior. Based on this novel parameterization procedure, the performance model...

Thermal Hydraulic Performance in a Solar Air Heater Channel with Multi V-Type Perforated Baffles

Directory of Open Access Journals (Sweden)

Anil Kumar

2016-07-01

Full Text Available This article presents heat transfer and fluid flow characteristics in a solar air heater (SAH channel with multi V-type perforated baffles. The flow passage has an aspect ratio of 10. The relative baffle height, relative pitch, relative baffle hole position, flow attack angle, and baffle open area ratio are 0.6, 8.0, 0.42, 60°, and 12%, respectively. The Reynolds numbers considered in the study was in the range of 3000–10,000. The re-normalization group (RNG k-ε turbulence model has been used for numerical analysis, and the optimum relative baffle width has been investigated considering relative baffle widths of 1.0–7.0.The numerical results are in good agreement with the experimental data for the range considered in the study. Multi V-type perforated baffles are shown to have better thermal performance as compared to other baffle shapes in a rectangular passage. The overall thermal hydraulic performance shows the maximum value at the relative baffle width of 5.0.

Anomalous I-V curve for mono-atomic carbon chains

International Nuclear Information System (INIS)

Song Bo; Fang Haiping; Sanvito, Stefano

2010-01-01

The electronic transport properties of mono-atomic carbon chains were studied theoretically using a combination of density functional theory and the non-equilibrium Green's functions method. The I-V curves for the chains composed of an even number of atoms and attached to gold electrodes through sulfur exhibit two plateaus where the current becomes bias independent. In contrast, when the number of carbon atoms in the chain is odd, the electric current simply increases monotonically with bias. This peculiar behavior is attributed to dimerization of the chains, directly resulting from their one-dimensional nature. The finding is expected to be helpful in designing molecular devices, such as carbon-chain-based transistors and sensors, for nanoscale and biological applications.

HIV-i võib nakatunud olla iga sajas täiskasvanud eestlane / Marika Raiski

Index Scriptorium Estoniae

Raiski, Marika

2005-01-01

Vt. ka Nädaline 27. sept., lk. 7. Vastavalt Maailma Terviseorganisatsiooni (WHO) ja UNAIDS-i hinnangule on Eestis hulgaliselt registreerimata HIV-juhte ning tegelikult võib HIV-nakatunuid olla juba iga sajas täiskasvanud Eesti elanik

Searches for excited leptons in √(s)=8 and 13 TeV CMS data

Energy Technology Data Exchange (ETDEWEB)

Endres, Matthias Klaus

2017-05-12

This thesis is about searches for excited leptons, being performed with CMS data from proton-proton collisions. The presented analyses are based on data of an integrated luminosity of 19.7 fb{sup -1} that was taken during 2012 at √(s)=8 TeV (Run I), and 2.7 fb{sup -1} from the 2015 period at √(s)=13 TeV (Run II). Excited leptons (l*) are expected to be sign for a possible lepton compositeness. Both analyses from the two different datasets consider the production of an excited muon (μ{sup *}) in association with another muon via contact interactions. The considered decay mode into another muon and a photon leads to a μμγ-final state. The factors f and f{sup '} that regulate the coupling between excited and Standard Model leptons, are assumed to be one. The observed data is consistent with the expectation from the Standard Model. Limits are set on the excluded signal cross section, as well as on the excited muon mass and the compositeness scale parameter Λ. Masses from 200 GeV up to 2.5(3) TeV≤M{sub μ{sup *}}=Λ are excluded with the Run I (Run II) analysis. At low excited muon masses, values of Λ up to 17(15) TeV are excluded. Combining the results from Run I and Run II extends the exclusion in Λ up to 19 TeV. Results from other Run I analyses that consider neutral current decays of excited electrons and muons are also evaluated. Since these channels are also sensitive to different configurations of f and f{sup '}, excited electron (muon) masses are excluded up to 2.35(2.4) TeV for the case that M{sub l{sup *}}=Λ and f=-f{sup '}=1.

Self-renewal and differentiation capabilities are variable between human embryonic stem cell lines I3, I6 and BG01V

Directory of Open Access Journals (Sweden)

Rao Mahendra S

2009-06-01

Full Text Available Abstract Background A unique and essential property of embryonic stem cells is the ability to self-renew and differentiate into multiple cell lineages. However, the possible differences in proliferation and differentiation capabilities among independently-derived human embryonic stem cells (hESCs are not well known because of insufficient characterization. To address this question, a side-by-side comparison of 1 the ability to maintain an undifferentiated state and to self-renew under standard conditions; 2 the ability to spontaneously differentiate into three primary embryonic germ lineages in differentiating embryoid bodies; and 3 the responses to directed neural differentiation was made between three NIH registered hES cell lines I3 (TE03, I6 (TE06 and BG01V. Lines I3 and I6 possess normal XX and a normal XY karyotype while BG01V is a variant cell line with an abnormal karyotype derived from the karyotypically normal cell line BG01. Results Using immunocytochemistry, flow cytometry, qRT-PCR and MPSS, we found that all three cell lines actively proliferated and expressed similar "stemness" markers including transcription factors POU5F1/Oct3/4 and NANOG, glycolipids SSEA4 and TRA-1-81, and alkaline phosphatase activity. All cell lines differentiated into three embryonic germ lineages in embryoid bodies and into neural cell lineages when cultured in neural differentiation medium. However, a profound variation in colony morphology, growth rate, BrdU incorporation, and relative abundance of gene expression in undifferentiated and differentiated states of the cell lines was observed. Undifferentiated I3 cells grew significantly slower but their differentiation potential was greater than I6 and BG01V. Under the same neural differentiation-promoting conditions, the ability of each cell line to differentiate into neural progenitors varied. Conclusion Our comparative analysis provides further evidence for similarities and differences between three h

A transport modeling of the carbon-nitrogen cycle at Igapó I Lake - Londrina, Paraná State, Brazil - doi: 10.4025/actascitechnol.v34i2.11792

Directory of Open Access Journals (Sweden)

Suellen Ribeiro Pardo

2012-03-01

Full Text Available This work is a contribution to a better understanding of the effect that domestic sewage discharges may cause in a water body, specifically at Igapó I Lake, in Londrina, Paraná State, Brazil. The simulation of the dynamics of pollutant concentrations throughout the water body was conducted by means of structured discretization of the geometry of Igapó I Lake, together with the finite differences and the finite elements methods. Firstly, the hydrodynamic flow (without the pollutants, modeled by Navier-Stokes and pressure equations, was numerically resolved by the finite differences method, and associated with the fourth order Runge-Kutta procedure. After that, by using the hydrodynamic field velocity, the flow of the reactive species (pollutants was described through a reaction transport model, restricted to the carbon-nitrogen cycle. The reaction transport model was numerically resolved by the stabilized finite elements method, by means of a semi-discrete formulation. A qualitative analysis of the numerical simulations provided a better understanding of the dynamics of the processes involved in the flow of the reactive species, such as the dynamics of the nitrification process, of the biochemical demand of oxygen and of the level of oxygen dissolved in the water body at Igapó I Lake.

Peripheral i.v. analysis (PIVA) of venous waveforms for volume assessment in patients undergoing haemodialysis.

Science.gov (United States)

Hocking, K M; Alvis, B D; Baudenbacher, F; Boyer, R; Brophy, C M; Beer, I; Eagle, S

2017-12-01

The assessment of intravascular volume status remains a challenge for clinicians. Peripheral i.v. analysis (PIVA) is a method for analysing the peripheral venous waveform that has been used to monitor volume status. We present a proof-of-concept study for evaluating the efficacy of PIVA in detecting changes in fluid volume. We enrolled 37 hospitalized patients undergoing haemodialysis (HD) as a controlled model for intravascular volume loss. Respiratory rate (F0) and pulse rate (F1) frequencies were measured. PIVA signal was obtained by fast Fourier analysis of the venous waveform followed by weighing the magnitude of the amplitude of the pulse rate frequency. PIVA was compared with peripheral venous pressure and standard monitoring of vital signs. Regression analysis showed a linear correlation between volume loss and change in the PIVA signal (R2=0.77). Receiver operator curves demonstrated that the PIVA signal showed an area under the curve of 0.89 for detection of 20 ml kg-1 change in volume. There was no correlation between volume loss and peripheral venous pressure, blood pressure or pulse rate. PIVA-derived pulse rate and respiratory rate were consistent with similar numbers derived from the bio-impedance and electrical signals from the electrocardiogram. PIVA is a minimally invasive, novel modality for detecting changes in fluid volume status, respiratory rate and pulse rate in spontaneously breathing patients with peripheral i.v. cannulas. © The Author 2017. Published by Oxford University Press on behalf of the British Journal of Anaesthesia. All rights reserved. For Permissions, please email: journals.permissions@oup.com

Influence of flow direction in the performance of anaerobic filters - doi: 10.4025/actascitechnol.v34i2.10353

Directory of Open Access Journals (Sweden)

Ronaldo Fia

2012-03-01

Full Text Available This work aimed to evaluate the performance of similar anaerobic filters operating with opposite wastewater flows, and compare mathematical models that describe the kinetics of organic matter degradation in both. Two pilot-scale filters were fed with domestic effluent – one filter worked as upflow (UAF and the other as downflow (DAF. Experimental COD data obtained from samples taken along the length of the filters were used to fit the first-order mathematical model, the model proposed by Leduy and Zajic (1973 and the model proposed by Brasil et al. (2007. The first model showed overestimated reaction constant (k values when compared to those obtained using the other models. The models proposed by Brasil et al. (2007 and Leduy and Zajic (1973 presented the highest coefficients of determination (R2. The average removal efficiencies of total COD were equal to 68 and 79% for UAF and DAF, respectively. The results revealed no significant differences between the two filters with regard to the variables applied.

Performance Calculations - and Appendix I - Model XC-120 (M-107)

Science.gov (United States)

1950-09-25

time oonsumed in warm-wp, take-off, climb, and aruino. 6. Plight time is 1ime in cdimb ftMd cruise only. 7. Average speed is total range dii26. b2- flj ...i’~ GL a , T.0 .T. 0 .T g:gF-OT... (sin2 ~41 LOLT.O0. Sinc ili (iR/C)/VTO "A R/O G TD VT D T (~c Aseme rbtra-yvalu-a of R/O In ft./rsoa. Find D aT

Standard model beyond the TeV

International Nuclear Information System (INIS)

Aurenche, P.

1987-01-01

The phenomenology of the standard model in the hadronic reactions in the 10 TeV range is described. The predictions of the model concerning the hadronic cross sections being based on the parton model, we first discuss the behaviour of the structure functions at the low values of X (x > 10 -4 ) which are attained at these energies and we show that the development of the leading logarithms equations allow us to calculate them. The production of W, Z, and gauge bosons and gauge boson pairs are reviewed. The Higgs boson production is discussed in detail according to his mass value [fr

Falling in the elderly: Do statistical models matter for performance criteria of fall prediction? Results from two large population-based studies.

Science.gov (United States)

Kabeshova, Anastasiia; Launay, Cyrille P; Gromov, Vasilii A; Fantino, Bruno; Levinoff, Elise J; Allali, Gilles; Beauchet, Olivier

2016-01-01

To compare performance criteria (i.e., sensitivity, specificity, positive predictive value, negative predictive value, area under receiver operating characteristic curve and accuracy) of linear and non-linear statistical models for fall risk in older community-dwellers. Participants were recruited in two large population-based studies, "Prévention des Chutes, Réseau 4" (PCR4, n=1760, cross-sectional design, retrospective collection of falls) and "Prévention des Chutes Personnes Agées" (PCPA, n=1765, cohort design, prospective collection of falls). Six linear statistical models (i.e., logistic regression, discriminant analysis, Bayes network algorithm, decision tree, random forest, boosted trees), three non-linear statistical models corresponding to artificial neural networks (multilayer perceptron, genetic algorithm and neuroevolution of augmenting topologies [NEAT]) and the adaptive neuro fuzzy interference system (ANFIS) were used. Falls ≥1 characterizing fallers and falls ≥2 characterizing recurrent fallers were used as outcomes. Data of studies were analyzed separately and together. NEAT and ANFIS had better performance criteria compared to other models. The highest performance criteria were reported with NEAT when using PCR4 database and falls ≥1, and with both NEAT and ANFIS when pooling data together and using falls ≥2. However, sensitivity and specificity were unbalanced. Sensitivity was higher than specificity when identifying fallers, whereas the converse was found when predicting recurrent fallers. Our results showed that NEAT and ANFIS were non-linear statistical models with the best performance criteria for the prediction of falls but their sensitivity and specificity were unbalanced, underscoring that models should be used respectively for the screening of fallers and the diagnosis of recurrent fallers. Copyright © 2015 European Federation of Internal Medicine. Published by Elsevier B.V. All rights reserved.

Current diffusion in a superconduting composite with a smeared I-V characteristic